Fluid inclusions in jadeitite and jadeite-rich rock from serpentinite mélanges in northern Hispaniola: Trapped ambient fluids in a cold subduction channel

Science.gov (United States)

Kawamoto, Tatsuhiko; Hertwig, Andreas; Schertl, Hans-Peter; Maresch, Walter V.

2018-05-01

Freezing-point depression was measured in aqueous fluid inclusions to determine salinities in six samples of jadeitite and jadeite-rich rock from the Jagua Clara serpentinite mélange of the Rio San Juan Complex, Dominican Republic. The mélange represents a fossil subduction-zone channel from a cold, mature subduction zone with a geothermal gradient of 6 °C/km. One hundred and twenty-five determinations of salinity in primary inclusions hosted in jadeite, quartz, apatite and lawsonite range between extremes of 1.2 and 8.7, but yield a well-defined mean of 4.5 ± 1.1 wt% (±1 s.d.) NaCl equiv, slightly higher than mean seawater (3.5 wt%). In one sample, eight additional fluid inclusions in quartz aligned along grain boundaries yield slightly lower values of 2.7 ± 1.3 wt% NaCl equiv. Homogenization temperatures were also measured for 47 fluid inclusions in two samples, but primary entrapment densities are not preserved. It is significant that the suite includes two types of samples: those precipitated directly from an aqueous fluid as well as examples of metasomatic replacement of a pre-existing magmatic rock. Nevertheless, the results indicate identical salinity for both types and suggest a much stronger genetic link between the two types of jadeitite and jadeite-rich rock than has previously been assumed. Based on the results of conductivity measurements in modern subduction zones, we envision a pervasive fluid in the subduction channel that evolved from salinity levels lower than those in sea-water up to the measured values due to on-going but largely completed serpentinization in the subduction channel. The present data represent a reference marker for the subduction channel of the Rio San Juan intra-oceanic subduction zone at 30-50 km depth and after 50-60 Myr of operation.

Geological setting of silica in Dehnow-Abid region (Eshghabad northeast using fluid inclusions studies

Directory of Open Access Journals (Sweden)

Omid Yazdanpanah

2017-02-01

, fine and coarse grains arkosic and lithic arkose sandstones (Tucker, 1994 that show low grade metamorphic texture which may be attributed to these sediments metamorphosed Jurassic age, but their equivalence is more with Shemshak forrnation (Aghanabati, 1994. Silica mineralization occurred as veins, veinlets and in some parts show silica mass of lense. In this area, there are two generations of faults with trends of northeast-southwest and north-south. Based on the geological section, the North – South faults is the second generation that cut system North-East to South-West faults (Kosari, 2004. In microscopic studies of fluid inclusions different characteristics such as their relationship with the host mineral, phase contents, size, shape, necking down and degree of filling were investigated. Microscopic investigates at room temperature, based on the criteria provided by Van den Kerkhof and Hein, 2001; Shepherd et al., 1985; Rodder, 1984 were performed. These studies indicated that as genetically point fluid inclusions in quartz area are able to divide into three groups (primary, secondary and pseudo secondary. The shapes of fluid inclusions are very different, but partly follow mineral crystallization system. Size of fluid inclusion varies between 5 to 120 microns, but most abundant fluid inclusions have size of 20 to 60 microns. According to a survey done on double polishing sections in laboratory conditions, the phase contents of fluid inclusions may be divided into six groups that include : monophase liquid (L, monophase vapor (V, two phases rich of liquid (L+V, two phases rich of vapor (V+L, three phases (L+V+S and immiscible liquid (L1+L2+V. The presence of CO2 around gas bubbles can represent metamorphism environments (Yardley and Bodnar, 2014; Van den Kerkhof et al., 2014. Heating analysis was done on 113 samples of fluid inclusions studied in order to investigate the situation homogenization temperature, and cooling analysis was done on 99 selected samples

Hydrothermal Fluid evolution in the Dalli porphyry Cu-Au Deposit: Fluid Inclusion microthermometry studies

Directory of Open Access Journals (Sweden)

Alireza Zarasvandi

2015-10-01

Full Text Available Introduction A wide variety of world-class porphyry Cu deposits occur in the Urumieh-Dohktar magmatic arc (UDMA of Iran.The arc is composed of calc-alkaline granitoid rocks, and the ore-hosting porphyry intrusions are dominantly granodiorite to quartz-monzonite (Zarasvandi et al., 2015. It is believed that faults played an important role in the emplacement of intrusions and subsequentporphyry-copper type mineralization (Shahabpour, 1999. Three main centers host the porphyry copper mineralization in the UDMA: (1 Ardestan-SarCheshmeh-Kharestan zone, (2 Saveh-Ardestan district; in the central parts of the UDMA, hosting the Dalli porphyry Cu-Au deposit, and (3 Takab-Mianeh-Qharahdagh-Sabalan zone. Mineralized porphyry coppersystems in the UDMA are restricted to Oligocene to Mioceneintrusions and show potassic, sericitic, argillic, propylitic and locally skarn alteration (Zarasvandi et al., 2005; Zarasvandi et al., 2015. In the Dalli porphyry deposit, four hydrothermal alteration zones, includingpotassic, sericitic, propylitic, and argillic types have been described in the two discrete mineralized areas, namely, northern and southern stocks. Hypogenemineralization includes chalcopyrite, pyrite, and magnetite, with minor occurrences of bornite.Supergene activity has produced gossan, oxidized minerals and enrichment zones. The supergene enrichment zone contains chalcocite and covellite with a 10-20 m thickness. Mineralization in the northern stock is mainly composed of pyrite and chalcopyrite. The aim of this study is the investigation and classification of hydrothermal veins and the constraining of physicochemical compositions of ore-forming fluids using systematic investigation of fluid inclusions. Materials and methods Twenty samples were collected from drill holes. Thin and polished sections were prepared from hydrothermal veins of thepotassic, sericitic and propylitic alteration zones. Samples used for fluid inclusion measurements were collected

Evolution and paragenetic context of low δD hydrothermal fluids from the Panasqueira W-Sn deposit, Portugal: new evidence from microthermometric, stable isotope, noble gas and halogen analyses of primary fluid inclusions

Science.gov (United States)

Polya, D. A.; Foxford, K. A.; Stuart, F.; Boyce, A.; Fallick, A. E.

2000-10-01

The evolution, paragenetic context and origin of remarkably low δD hydrothermal fluids from the Hercynian Panasqueira W-Sn-Cu(Ag) deposit have been investigated through a combined microthermometric, stable isotope, halogen and noble gas fluid inclusion study. Large variations in δD between -60 ‰ and -134‰ have been observed in primary fluid inclusions from growth zones in a quartz crystal (Pa66) paragenetically constrained to the main sulfide stage (MSS) of ore formation. The same fluids exhibited relatively constant fluid inclusion homogenisation temperatures (254 to 260°C), salinities (7.4 to 8.7 wt.% NaCl equivalent) and calculated fluid δ 18O (3.8 to 4.4‰). All the fluids exhibited 40Ar excesses. Mean molar Br/Cl and I/Cl ratios varied from 2.3 × 10 -3-4.2 × 10 -3 and 8 × 10 -4-10 × 10 -4 respectively, with the more Br-rich fluids being associated with the more deuterium-depleted fluids. The low palaeolatitude of Panasqueira throughout the main stages of ore formation and the overwhelming predominance of meteoric fluids in the main, late and post-ore mineralising fluids with δD of -40 to -65‰ lends little support for any models involving low δD palaeometeoric water. The limited range of 40Ar∗/Cl ratios (1.1 × 10 -5-1.6 × 10 -5) also precludes boiling during the MSS or mixing of meteoric water with highly fractionated deuterium-depleted magmatic waters as viable mechanisms for producing the low δD fluids. The high Br/Cl and I/Cl of the MSS fluids indicate significant fluid interactions with organic rich sediments or metasediments, in particular regionally abundant Carboniferous coals or coaly sediments that are inferred to be depleted in deuterium by around 85‰ compared to palaeometeoric water. The large range of δD observed in the MSS fluids may be explained by isotopic exchange of palaeometeoric water with these coals at varying water/rock (wt./wt.) ratios between 0.02 and 0.002 with fluid oxygen isotopic compositions controlled by

The Cocos Ridge hydrothermal system revealed by microthermometry of fluid and melt inclusions

Science.gov (United States)

Brandstätter, J.; Kurz, W.; Krenn, K.

2017-12-01

Microthermometric analyses of fluid and melt inclusions in hydrothermal veins and in the Cocos Ridge (CCR) basalt were used to reveal the CCR thermal history at IODP Site 344-U1414 and to constrain fluid source and flow. Hydrothermal veins are hosted by lithified sediments and CCR basalt . Site 344-U1414, located 1 km seaward of the Middle American Trench offshore Costa Rica, serves to evaluate fluid/rock interaction, the hydrologic system and geochemical processes linked with the tectonic evolution of the incoming Cocos Plate from the Early Miocene up to recent times. The veins in the sedimentary rocks are mainly filled by blocky calcite, containing numerous fluid inclusions, and sometimes crosscut fibrous quartz/chalcedony veins. The veins in the basalt can be differentiated into three types: antitaxial fibrous calcite veins, composite veins with fibrous calcite and clay minerals at the vein margins and spherulitic quartz in the center, and syntaxial blocky aragonite veins surrounded by a clay selvage in the uppermost CCR basalt sections. Secondary minerals, clay minerals, fibrous calcite, quartz/chalcedony and pyrite also filled vesicles in the basalt. Fluid inclusions were mainly found in the aragonite veins and rarely in quartz in the composite veins and vesicles. Blocky veins with embedded wall rock fragments appear in the sediments and in the basalt indicate hydraulic fracturing. The occurrence of decrepitated fluid inclusions show high homogenization temperatures up to 400 °C. Decrepitated fluid inclusions are formed by increased internal overpressure, related to isobaric heating. Elongated fluid inclusion planes, arc-like fluid inclusions and low homogenization temperatures indicate subsequent isobaric cooling. The results obtained so far from Raman spectroscopy and microthermometry indicate CO2 inclusions and petrographic observations suggest the presence of silicate melt inclusions in phenocrysts in the basalt (mainly in clinopyroxene and plagioclase

Fluids in the Siilinjärvi carbonatite complex, eastern Finland: Fluid inclusion evidence for the formation conditions of zircon and apatite

Directory of Open Access Journals (Sweden)

Poutiainen, M.

1995-06-01

Full Text Available In the studied zircon and apatite crystals, data recorded two different compositional types of fluid inclusions: Type 1 H2O-CO2, low salinity inclusions (XCO2 = 0.42 to 0.87; XNaCl = 0.001 to 0.005 with bulk densities of 0.73 to 0.87 g/cm3, and Type 2 H2O moderate salinity (XNaCl = 0.03 to 0.06 inclusions with densities of 0.83 to 1.02 g/cm3. The Type 1 inclusions are not present in apatite. In zircon, the observed fluid inclusion types occur in separate domains: around (Type 1 and outside (Type 2 the apparent core. Fluid inclusions are further subdivided into pseudosecondary and secondary inclusions. Using a combination of SEM-EDS, optical characteristics and crushing-stage, various daughter and captive minerals were identified. The fluid inclusion data suggest that the pseudosecondary Type 1 and Type 2 inclusions in zircon and apatite were trapped during the pre-emplacement evolution of the carbonatite at mid-crustal conditions (P≥4 kbar, T≥625°C. The Type 1 fluid was depleted in CO2, during crystal fractionation and cooling leading to a fluid phase enriched in water and alkalies. Fenitization was obviously induced by these saline aqueous fluids. During emplacement of the carbonatite to the present level, zircon phenocrysts were intensively fractured, some Type 1 inclusions were re-equilibrated, and multiphase Type 2 inclusions were trapped. It is assumed that all these inclusions in zircon and the pseudosecondary Type 2 inclusions in apatite have a magmatic origin. In apatite, calcite inclusions occur side-by-side with the secondary Type 2 inclusions. These calcites co-existed with the aqueous fluid during fracturing and metamorphic re-crystallization of apatites. Probably, this metamorphic fluid also is responsible for the transport and deposition of at least some of the calcite at low temperatures (200-350°C.

Trace element analyses of fluid inclusions using laser ablation ICP-MS

Directory of Open Access Journals (Sweden)

Cong-ying Li

2018-03-01

Full Text Available Fluid inclusions are records of the physico-chemical conditions of fluid–rock interactions during magmatism, mineralization and fluid percolation and mixing processes. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS is a powerful tool for in situ analyses of small samples at micrometer levels. Here we report in situ analyses of fluid inclusions using LA-ICP-MS method. NIST SRM glasses and 23Na are generally used as external and internal standards for LA-ICP-MS analysis of fluid inclusion, respectively, although the RSD of microthermometric estimation of 23Na is about 20% and even worse, the background signal of Na is high for most ICP-MS. Using well-characterized natural fluids inclusion, we show that RESOlution S-155 laser system analyze fluid inclusions in quartz and determine the trace element concentrations. Resonetics RESOlution S-155 laser has the advantage of the motorized Z stage can be used to accommodate variation of sample height or sample topography and height difference between samples, which is very important for analyzing the fluid inclusion in quartz. Our results suggest laser energy density is 25 J/cm2, laser pulse repetition rates are commonly between 6 and 10 Hz to avoid the fissuring of quartz and obtain adequate results. For this LA-ICP-MS analysis, uncertainty on 35Cl content is around 40% because of intensity of the 35Cl signal is three orders of magnitude less intense than the intensity of the 23Na signal. Nevertheless, it is still a useful reference for fluid inclusion analyses in addition to 23Na. This technique can be applied to a range of hydrothermal geology problems, including determining the origins of ore forming brines and ore deposition processes, mapping metamorphic and hydrothermal fluid provinces and pathways, and constraining the effects of fluid–rock reactions and fluid mixing.

3D Volumetric Analysis of Fluid Inclusions Using Confocal Microscopy

Science.gov (United States)

Proussevitch, A.; Mulukutla, G.; Sahagian, D.; Bodnar, B.

2009-05-01

Fluid inclusions preserve valuable information regarding hydrothermal, metamorphic, and magmatic processes. The molar quantities of liquid and gaseous components in the inclusions can be estimated from their volumetric measurements at room temperatures combined with knowledge of the PVTX properties of the fluid and homogenization temperatures. Thus, accurate measurements of inclusion volumes and their two phase components are critical. One of the greatest advantages of the Laser Scanning Confocal Microscopy (LSCM) in application to fluid inclsion analsyis is that it is affordable for large numbers of samples, given the appropriate software analysis tools and methodology. Our present work is directed toward developing those tools and methods. For the last decade LSCM has been considered as a potential method for inclusion volume measurements. Nevertheless, the adequate and accurate measurement by LSCM has not yet been successful for fluid inclusions containing non-fluorescing fluids due to many technical challenges in image analysis despite the fact that the cost of collecting raw LSCM imagery has dramatically decreased in recent years. These problems mostly relate to image analysis methodology and software tools that are needed for pre-processing and image segmentation, which enable solid, liquid and gaseous components to be delineated. Other challenges involve image quality and contrast, which is controlled by fluorescence of the material (most aqueous fluid inclusions do not fluoresce at the appropriate laser wavelengths), material optical properties, and application of transmitted and/or reflected confocal illumination. In this work we have identified the key problems of image analysis and propose some potential solutions. For instance, we found that better contrast of pseudo-confocal transmitted light images could be overlayed with poor-contrast true-confocal reflected light images within the same stack of z-ordered slices. This approach allows one to narrow

[Application of in situ cryogenic Raman spectroscopy to analysis of fluid inclusions in reservoirs].

Science.gov (United States)

Chen, Yong; Lin, Cheng-yan; Yu, Wen-quan; Zheng, Jie; Wang, Ai-guo

2010-01-01

Identification of salts is a principal problem for analysis of fluid inclusions in reservoirs. The fluid inclusions from deep natural gas reservoirs in Minfeng sub-sag were analyzed by in situ cryogenic Raman spectroscopy. The type of fluid inclusions was identified by Raman spectroscopy at room temperature. The Raman spectra show that the inclusions contain methane-bearing brine aqueous liquids. The fluid inclusions were analyzed at -180 degrees C by in situ cryogenic Raman spectroscopy. The spectra show that inclusions contain three salts, namely NaCl2, CaCl2 and MgCl2. Sodium chloride is most salt component, coexisting with small calcium chloride and little magnesium chloride. The origin of fluids in inclusions was explained by analysis of the process of sedimentation and diagenesis. The mechanism of diagenesis in reservoirs was also given in this paper. The results of this study indicate that in situ cryogenic Raman spectroscopy is an available method to get the composition of fluid inclusions in reservoirs. Based on the analysis of fluid inclusions in reservoirs by in situ cryogenic Raman spectroscopy with combination of the history of sedimentation and diagenesis, the authors can give important evidence for the type and mechanism of diagenesis in reservoirs.

The evolution of pegmatite-hosted Sn-W mineralization at Nong Sua, Thailand: Evidence from fluid inclusions and stable isotopes

Science.gov (United States)

Linnen, Robert L.; Williams-Jones, Anthony E.

1994-01-01

The Nong Sua aplite-pergmatite complex contains two dominant styles of Sn-W-Ta-Nb mineralization. Cassiterite ± Nb-Ta-Ti oxide minerals are disseminated in the pegmatite, and cassiterite and wolframite are hosted by quartz-tourmaline veins which are contained solely within aplite. The orthomagmatic fluid at Nong Sua is preserved as primary fluid inclusions in the cores of magmatic garnet crystals that have high tin concentrations (garnet cores without fluid inclusions do not contain elevated tin concentrations). These fluid inclusions have a composition of 3 wt% NaCl eq. The low salinity suggests that, at vapor saturation, tin was partitioned in favour of the melt, which allowed cassiterite to initially crystallize directly from the melt. Primary, pseudosecondary, and secondary fluid inclusions in cassiterite, tourmaline, and quartz record three-component mixing of the orthomagmatic fluid with high salinity aqueous and with CO 2-rich fluids. The orthomagmatic water is interpreted to have had δ 18O value of +8.7 to +9.9 per mil and a δD value of -72 to -78 per mil from δ18O analyses of muscovite and quartz, and δD of muscovite. The δ18O composition of muscovite decreased from 10.1 to 8.0 per mil and δD increased from - 106 to - 85 per mil, from the magmatic to the hydrothermal stages of pegmatite evolution. These changes are consistent with an influx of metamorphic fluids or evolved meteoric waters. We consider that the saturation of the melt with vapor caused the pressure in the pegmatite to rise to approximately 3.8 kbar, at a temperature of 650°C. Fluid overpressure caused the aplite to fracture, and veins to form from fluids which migrated into the fracture-induced low pressure zones. This event can be modeled by an isothermal decompression to 2.7 kbar. Cassiterite deposition was probably controlled by increasing fO 2, whereas wolframite deposition resulted from the mixing of W-rich with Fe-Mn-rich fluids. In both cases decompression, cooling, and

Identifying Fracture Types and Relative Ages Using Fluid Inclusion Stratigraphy

Energy Technology Data Exchange (ETDEWEB)

Dilley, Lorie M.; Norman, David; Owens, Lara

2008-06-30

Enhanced Geothermal Systems (EGS) are designed to recover heat from the subsurface by mechanically creating fractures in subsurface rocks. Understanding the life cycle of a fracture in a geothermal system is fundamental to the development of techniques for creating fractures. Recognizing the stage of a fracture, whether it is currently open and transmitting fluids; if it recently has closed; or if it is an ancient fracture would assist in targeting areas for further fracture stimulation. Identifying dense fracture areas as well as large open fractures from small fracture systems will also assist in fracture stimulation selection. Geothermal systems are constantly generating fractures, and fluids and gases passing through rocks in these systems leave small fluid and gas samples trapped in healed microfractures. Fluid inclusions trapped in minerals as the fractures heal are characteristic of the fluids that formed them, and this signature can be seen in fluid inclusion gas analysis. Our hypothesis is that fractures over their life cycle have different chemical signatures that we can see in fluid inclusion gas analysis and by using the new method of fluid inclusion stratigraphy (FIS) the different stages of fractures, along with an estimate of fracture size can be identified during the well drilling process. We have shown with this study that it is possible to identify fracture locations using FIS and that different fractures have different chemical signatures however that signature is somewhat dependent upon rock type. Open, active fractures correlate with increase concentrations of CO2, N2, Ar, and to a lesser extent H2O. These fractures would be targets for further enhancement. The usefulness of this method is that it is low cost alternative to current well logging techniques and can be done as a well is being drilled.

Dynamics of mineral crystallization at inclusion-garnet interface from precipitated slab-derived fluid phase: first in-situ synchrotron x-ray measurements

Science.gov (United States)

Malaspina, Nadia; Alvaro, Matteo; Campione, Marcello; Nestola, Fabrizio

2015-04-01

Remnants of the fluid phase at ultrahigh pressure (UHP) in subduction environments may be preserved as primary multiphase inclusions in UHP minerals. These inclusions are frequently hosted by minerals stable at mantle depths, such as garnet, and show the same textural features as fluid inclusions. The mineral infillings of the solid multiphase inclusions are generally assumed to have crystallized by precipitation from the solute load of dense supercritical fluids equilibrating with the host rock. Notwithstanding the validity of this assumption, the mode of crystallization of daughter minerals during precipitation within the inclusion and/or the mechanism of interaction between the fluid at supercritical conditions and the host mineral are still poorly understood from a crystallographic point of view. A case study is represented by garnet orthopyroxenites from the Maowu Ultramafic Complex (China) deriving from harzburgite precursors metasomatised at ~ 4 GPa, 750 °C by a silica- and incompatible trace element-rich fluid phase. This metasomatism produced poikilitic orthopyroxene and inclusion-rich garnet porphyroblasts. Solid multiphase primary inclusions in garnet display a size within a few tens of micrometers and negative crystal shapes. Infilling minerals (spinel: 10-20 vol.%; amphibole, chlorite, talc, mica: 80- 90 vol.%) occur with constant volume ratios and derive from trapped solute-rich aqueous fluids. To constrain the possible mode of precipitation of daughter minerals, we performed for the first time a single-crystal X-ray diffraction experiment by means of Synchrotron Radiation at DLS-Diamond Light Source. In combination with electron probe microanalyses, this measurement allowed the unique identification of each mineral phase and their reciprocal orientations. We demonstrated the epitaxial relationship between spinel and garnet and between some hydrous minerals. Epitaxy drives a first-stage nucleation of spinel under near-to-equilibrium conditions

Fluid inclusion study of the uranium mineralised granite cataclasite/mylonite and quartz reef in the Mulapalle area, Cuddapah district, Andhra Pradesh

International Nuclear Information System (INIS)

Thirupathi, P.V.; Tripathi, B.K.; Umamaheswar, K.; Dhana Raju, R.

2004-01-01

Granite cataclasite and mylonite in the basement fracture zones around Mulapalle in the southwestern environs of the Cuddapah basin are uraniferous with the presence of brannerite, U-Ti complex and uraninite. The ENE-WSW trending fracture zone is cut by NW-SE trending quartz reef. Fluid inclusion study carried out on quartz from the mineralized cataclasite and as well as from the quartz reef shows the presence of both primary [8-20 microns] and abundant secondary up to [6 microns] inclusions. Most of the inclusions are bi-phase (L+V) liquid rich having a degree of fill around 0.90 with constant liquid to vapour ratio. Few inclusions are liquid monophase and multiphase [S+L+V]. They behave as H 2 O-NaCl system and homogenize into liquid phase at low temperature range [125 to 200 degC] except some bi-phase inclusions in the barren quartz reef, which are found to behave as an impure H 2 O-NaCl system admixed with other salts. Wide variation of salinity in the range of 3-25 wt%e NaCl is recorded by the inclusions in both the mineralized cataclasite and the barren quartz reef. The trapping pressure [P T ] of the inclusions of barren quartz reef spreads between 200 to 600 bars while those of mineralized cataclasite restricts to upper end of that range. Some inclusions in mineralized cataclasite that homogenize at high temperatures [200 to 250 degC] show P T between 800 to 1000 bars. The presence of more than one population without any change in fluid composition indicate their origin at different stages of deformation modifying the primary inclusions of the granite and from fluids migrated through fractures at later stages. In the barren quartz reef, the distribution of inclusions of contrasting salinity implies the environment of mixing of connectively driven hydrothermal fluid of metamorphic origin and meteoric water. (author)

Fluorine concentrations of ore fluids in the Illinois-Kentucky district: Evidence from SEM-EDS analysis of fluid inclusion decrepitates

Science.gov (United States)

Kenderes, Stuart M.; Appold, Martin S.

2017-08-01

The Illinois-Kentucky district is an atypical occurrence of Mississippi Valley-type (MVT) mineralization that consists predominantly of fluorite rather than metal sulfide minerals. A long-standing assumption for the predominance of fluorite in the Illinois-Kentucky district is that the ore fluids there were anomalously rich in dissolved fluorine compared to typical sedimentary brines and other MVT ore fluids. This hypothesis is based on the unusual close temporal and spatial association of fluorine-rich ultramafic igneous rocks to MVT mineralization in the district, high K and Sr concentrations in the igneous rocks and in MVT ore-hosted fluid inclusions, a significant mantle 3He/4He component in ore-hosted fluid inclusions, and reaction path models that show titration of a HF-rich fluid into sedimentary brine is capable of producing a fluorite-dominated MVT ore mineral assemblage. The purpose of the present study was to test this hypothesis more directly by determining the fluorine concentration of the Illinois-Kentucky ore fluid through SEM-EDS analysis of evaporative solute mounds resulting from thermal decrepitation of fluid inclusions hosted in sphalerite. All 26 evaporative solute mounds from Illinois-Kentucky sphalerite samples analyzed contained detectable concentrations of fluorine of 1-4 weight percent. Based on calibration to standard solutions and previously published fluid inclusion major element concentrations, these solute mound fluorine concentrations correspond to fluid inclusion fluorine concentrations of about 680-4300 ppm, indicating that the Illinois-Kentucky ore fluids were quite rich in fluorine compared to typical sedimentary brines, which have fluorine concentrations mainly on the order of 1's to 10's of ppm. In contrast, solute mounds from sphalerite-hosted fluid inclusions from the Tri-State district did not contain fluorine in excess of the detection limit. The detection limit equates to an aqueous fluorine concentration between 87 and

Paleoclimatic implications from fluid inclusion data in Messinian halite of Italian sites

Science.gov (United States)

Speranza, G.; Tecce, F.; Cosentino, D.; Faccenna, C.

2012-12-01

The Neogene sedimentary succession of the Mediterranean Basin includes a thick evaporitic succession (gypsum and halite) deposited during the Messinian Salinity Crisis (MSC), which occurred between 5.96 and 5,33 Ma. While several studies have been carried out to define the water budget of the MSC, the temperature of the Mediterranean water system is poorly constrained. The purpose of this work is to collect the first dataset of homogenization temperatures (Th) from primary fluid inclusions in Messinian halite from different Italian sites. Such data yield very useful information on water temperature at salt deposition time and thus on the climatic conditions in the peak desiccation stage of the Mediterranean sea. We focused our attention on three areas: the Volterra Basin (Tuscany), the Crotone Basin (Calabria) and the Caltanissetta Basin (Sicily). These basins are filled by Neogene sedimentary sequences, including Messinian gypsum deposits and halite. Halite samples were taken directly from salt diapirs outcrops (Crotone Basin), from borehole S1113 cores drilled by the Italian Solvay company (Volterra Basin) and inside salt mines of Petralia Sottana, Racalmuto and Realmonte (Caltanissetta Basin). Halite chips were manually prepared carefully avoiding water and controlling the temperature. Halite minerals contain abundant fluid inclusions. The majority of them are monophase liquid inclusions, showing a very regular cubic or rectangular shape. They occur along chevron and growth planes and thus were considered to have a primary origin. Some others contain solids and/or organic matter. During microthermometry, vapor bubbles nucleation has been produced directly into the stage chamber, slightly modifying the traditional "cooling" method; we could then nucleate the bubbles and at the same time constantly control the sample temperature, avoiding any sudden change that can lead to useless altered data. Microthermometric data were measured from 218 primary all liquid fluid

Quartz-Amethyst Hosted Hydrocarbon-Bearing Fluid Inclusions from the Green Ridge Breccia in the Snoqualmie Granite, North Cascades, WA, USA

Directory of Open Access Journals (Sweden)

Martin Feely

2017-09-01

Full Text Available The Green Ridge Breccia cuts the composite Miocene Snoqualmie Batholith in King County, WA, USA. The granite was emplaced at ~5 km depth between ~17 and 20 Ma and the crosscutting NW trending breccia contains large angular blocks of the host granite (<1 m in longest dimension. The brecciated granite blocks are cemented by quartz-amethyst euhedra (<10 cm in longest dimension bearing vugs. A notable feature is the presence of centimetric scale amber coloured oil inclusions within the quartz-amethyst crystals. Fluid inclusion studies using Transmitted Light Petrography, UV Microscopy, Microthermometry, Laser Raman Microspectroscopy and Gas Chromatography-Mass Spectrometry record the presence and the fluid composition of three fluid inclusion types hosted by the euhedra: primary Type 1 (liquid rich two-phase (L + V aqueous inclusions and secondary Type 2 bituminous two-phase (S + L inclusions and Type 3 amber coloured oil bearing two-phase immiscible liquid inclusions. The Green Ridge Breccia was the locus for convective hydrothermal fluid flow that formed the quartz-amethyst vugs formed at T~390 °C assuming a trapping pressure of ~1.65 kb. Later, hydrocarbon fluids migrated downwards from the roof source rock (e.g., the Guye Sedimentary Member and were trapped in the euhedra. This was followed by unroofing of the batholith and exposure of the Green Ridge Breccia. This study highlights the potential for other oil migrations into the Snoqualmie Batholith in areas where it forms the basement capped by the Guye Sedimentary Member.

Preliminary report on fluid inclusions from halites in the Castile and lower Salado formations of the Delaware Basin, southeastern New Mexico

International Nuclear Information System (INIS)

Stein, C.L.

1985-09-01

A suite of samples composed primarily of halite from the upper Castile and lower Salado Formations of the Permian Basin was selected from Waste Isolation Pilot Plant (WIPP) core for a reconnaissance study of fluid inclusions. Volume percent of these trapped fluids averaged 0.7% to 1%. Freezing-point depressions varied widely and appeared to be unrelated to fluid-inclusion type, to sedimentary facies, or to stratigraphic depth. However, because very low freezing points were usually associated with anhydrite, a relation may exist between freezing-point data and lithology. Dissolved sulfate values were constant through the Castile, then decreased markedly with lesser depth in the lower Salado. This trend correlates very well with observed mineralogy and is consistent with an interpretation of the occurrence of secondary polyhalite as a result of gypsum or anhydrite alteration with simultaneous consumption of dissolved sulfate from the coexisting fluids. Together with the abundance and distribution of fluid inclusions in primary or ''hopper'' crystal structures, this evidence suggests that inclusions seen in these halites did not migrate any significant geographical distance since their formation. 28 refs., 17 figs., 2 tabs

Fluid Characteristics in the Giant Quartz Reef System of the Bundelkhand Craton, India: Constraints from Fluid Inclusion Study

Science.gov (United States)

Rout, D.; Panigrahi, M. K.; Pati, J. K.

2017-12-01

Giant quartz reefs are anomalous features indicating extensive mobilization of silica in the crust. Such reefs in the Abitibi belt, Canada and elsewhere are believed to be the result of activity of fluid of diverse sources on terrain boundaries. The Bundelkhand granitoid complex constituting a major part of the Bundelkhnad Craton in north-Central India is traversed by numerous such quartz reefs all across for a length of about 500 km. There are about 20 major reefs having dimensions of 35 to 40 km in length, 50 to 60 m in width standing out as prominent ridges in the region. Almost all are aligned parallel to each other in a sub-vertical to vertical manner following the NE-SW to NNE-SSW trend. Fluid inclusion petrography in quartz from these reefs reveal four types of inclusions viz. aqueous biphase (type-I), pure carbonic (type-II), aqueous carbonic (type-III) and polyphase (type-IV) inclusions. The type-I aqueous biphase inclusions are the dominant type in all the samples studied so far. Salinities calculated from temperature of melting of last ice (Tm) values are low to moderate, ranging from 0.18 to 18.19 wt% NaCl equivalents. Temperature of liquid-vapor homogenization (Th) values of these inclusions show a wide range from 101 ºC to 386 ºC (cluster around 150-250 ºC) essentially into liquid phase ruling out boiling during its course of evolution. Besides, aqueous Biphase inclusions, some data on pure CO2 inclusions furnish a near constant value of TmCO2 at -56.6 ºC in the Bundelkhand Craton indicating absence of CH4. Bivariate plot between Th and salinity suggest three possible water types which are controlling the overall activity of fluid in quartz reefs of Bundelkhand Craton viz. low-T low saline, high-T low saline and moderate-T and moderate saline. A low saline and CO2-bearing and higher temperature nature resembles a metamorphic fluid that may be a source for these giant quartz reefs. The low temperature low-salinity component could be a meteoric

Inclusive Education in Government Primary Schools: Teacher Perceptions

OpenAIRE

Itfaq Khaliq Khan; Shujahat Haider Hashmi; Nabeela Khanum

2017-01-01

The perceptions of primary school teachers towards inclusive education was investigated in mainstream government schools of Islamabad capital territory where inclusive education was being supported by Sight savers and other international organizations. The study was carried out involving 54 teachers in six randomly selected primary schools. The sampled group comprised both, teachers trained in inclusive education and teachers working in same schools, but not trained in inclusive education. Pu...

The nature of hydrothermal fluids in the Kahang porphyry copper deposit (Northeast of Isfahan based on mineralography, fluid inclusion and stable isotopic data

Directory of Open Access Journals (Sweden)

Salimeh Sadat Komeili

2017-02-01

Full Text Available Introduction The Kahang Cu- Mo deposit is situated approximately 73 Km northeast of Isfahan. Asadi (2007 identified a geological reserve of 40 Mt (proven reserve grading at 0.53 Cu, 0.02 Mo and estimated reserve of 120 Mt. All the rock types in the region have been subjected to hydrothermal solutions which gave rise to three different alteration facies. The dacite and rhyodacite volcanic rocks and granitic- granodioritic stocks have experienced phyllic alteration. Disseminated and stockwork siliceous veins are the major styles of mineralization in this zone. Intermediate argillitic alteration developed on a part of dacitic and rhyodacitic rocks whereas andesite and basaltic-andesite plus related pyroclastic rocks have been subjected to propyllitic alteration. This paper presents the results of geological and mineralogical studies carried out in the Kahang area. This preliminary information is integrated with additional data on ore mineralogy, fluid inclusions and stable isotopes in view of understanding the genesis of the Cu- Mo deposit and the nature of the fluids involved in ore formation. Materials and Methods A total of 18 polished thin sections were prepared at the University of Isfahan for optical study. Fluid inclusions study was carried out on 8 double polished quartz thin sections (stockworks containing ore mineralization from phyllic zone. H – O stable isotope analysis was performed on 4 quartz samples from siliceous stockworks (from phyllic altered zone and one vein epidote sample (from propyllitic zone. All isotopic analyses were performed at the University of Oregan, Oregan, USA. Discussion In the investigated mineralization area, the hypogene zone is characterized by the presence of pyrite, chalcopyrite, bornite and magnetite. Hematite, goethite, jarosite, malachite and azurite are the predominant minerals of supergene zone. The major textures of the primary sulfides are disseminated, vein and veinlet. Pyrite is the most common

Analysis of I-Br-Cl in single fluid inclusions by LA-ICP-MS

Science.gov (United States)

Giehl, C.; Fusswinkel, T.; Beermann, O.; Garbe-Schönberg, D.; Scholten, L.; Wagner, T.

2017-12-01

Halogens are excellent tracers of hydrothermal fluid sources and in-situ LA-ICP-MS analysis of Cl and Br in single fluid inclusions has provided fundamentally new insight into hydrothermal fluid flow and ore formation. There is mounting evidence that enrichment and depletion of Br relative to Cl may be caused by a number of processes beyond seawater evaporation and halite dissolution which cannot be discriminated on the basis of Br/Cl ratios alone. Expanding the analytical capabilities of fluid inclusion LA-ICP-MS analysis to include iodine would allow to discern between selective and coupled enrichment processes of Cl, Br and I, even in geologically complex samples that are inaccessible to bulk extraction techniques. We present iodine concentration data determined by LA-ICP-MS analysis of synthetic fluid inclusions, using the Sca17 scapolite reference material for external standardization (Seo et al., 2011). Iodine concentrations in Sca17 were determined using the Durango apatite standard. Four starting solutions containing I (0.3, 1.5, 27, 78 µg/g), Br (941, 1403, 2868, 4275 µg/g), Na (30.7, 94.7 mg/g), and Cl (50, 137 mg/g) (analyzed by ICP-OES and ICP-MS at CAU Kiel) were prepared by dissolving reagent grade chemical powders in ultra-pure water. Spherical inclusions (up to 40 µm) were synthesized from the starting solutions in pre-cracked, HF-treated synthetic quartz crystals which were placed in gold capsules and equilibrated at 600°C, 100/200 MPa in cold seal pressure vessels. Fluid inclusion LA-ICP-MS analysis (University of Helsinki) yielded average I concentrations in excellent agreement with the starting solutions (27.3 µg/g ± 14 %RSD for the 27 µg/g solution and 77.6 µg/g ± 8.3 %RSD for the 78 µg/g solution). Average Br and I concentrations deviate less than 10 % from solution concentration values. For the low I concentration solutions, the synthetic inclusions were too small to detect I. Thus, given suitable standard materials and sufficient

Chemical Signatures of and Precursors to Fractures Using Fluid Inclusion Stratigraphy

Energy Technology Data Exchange (ETDEWEB)

Lorie M. Dilley

2011-03-30

Enhanced Geothermal Systems (EGS) are designed to recover heat from the subsurface by mechanically creating fractures in subsurface rocks. Open or recently closed fractures would be more susceptible to enhancing the permeability of the system. Identifying dense fracture areas as well as large open fractures from small fracture systems will assist in fracture stimulation site selection. Geothermal systems are constantly generating fractures (Moore, Morrow et al. 1987), and fluids and gases passing through rocks in these systems leave small fluid and gas samples trapped in healed microfractures. These fluid inclusions are faithful records of pore fluid chemistry. Fluid inclusions trapped in minerals as the fractures heal are characteristic of the fluids that formed them, and this signature can be seen in fluid inclusion gas analysis. This report presents the results of the project to determine fracture locations by the chemical signatures from gas analysis of fluid inclusions. With this project we hope to test our assumptions that gas chemistry can distinguish if the fractures are open and bearing production fluids or represent prior active fractures and whether there are chemical signs of open fracture systems in the wall rock above the fracture. Fluid Inclusion Stratigraphy (FIS) is a method developed for the geothermal industry which applies the mass quantification of fluid inclusion gas data from drill cuttings and applying known gas ratios and compositions to determine depth profiles of fluid barriers in a modern geothermal system (Dilley, 2009; Dilley et al., 2005; Norman et al., 2005). Identifying key gas signatures associated with fractures for isolating geothermal fluid production is the latest advancement in the application of FIS to geothermal systems (Dilley and Norman, 2005; Dilley and Norman, 2007). Our hypothesis is that peaks in FIS data are related to location of fractures. Previous work (DOE Grant DE-FG36-06GO16057) has indicated differences in the

The non-destructive analysis of fluid inclusions in minerals using the proton microprobe

Energy Technology Data Exchange (ETDEWEB)

Ryan, C.G.; Van Achterbergy, E. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience; Heinrich, C.A. [ETH Zentrum, Zurich, (Switzerland). Department Erdwissenschaften; Mernagh, T.P. [Max-Planck-Institut fuer Chemie (Otto-Hahn-Institut), Mainz (Germany); Zaw, K. [Tasmania Univ., Sandy Bay, TAS (Australia)

1996-12-31

The study of ore forming fluids trapped as fluid inclusions in minerals is the key to understanding fluid flow paths at the time of ore formation and to predicting the location of ore bodies within large-scale magmatic hydrothermal systems. The large penetration depths and the predictable nature of MeV proton trajectories and X-ray absorption enables reliable modelling of PIXE yields and the development of standardless quantitative analytical methods. This permits quantitative microanalysis of minerals at ppm levels, and more recently has enabled the development of methods for quantitative trace-element imaging and the quantitative, non-destructive analysis of individual fluid inclusions. This paper reports on recent developments in Proton Microprobe techniques with special emphasis on ore systems and fluid inclusion analysis. 6 refs., 2 figs.

The non-destructive analysis of fluid inclusions in minerals using the proton microprobe

Energy Technology Data Exchange (ETDEWEB)

Ryan, C G; Van Achterbergy, E [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience; Heinrich, C A [ETH Zentrum, Zurich, (Switzerland). Department Erdwissenschaften; Mernagh, T P [Max-Planck-Institut fuer Chemie (Otto-Hahn-Institut), Mainz (Germany); Zaw, K [Tasmania Univ., Sandy Bay, TAS (Australia)

1997-12-31

The study of ore forming fluids trapped as fluid inclusions in minerals is the key to understanding fluid flow paths at the time of ore formation and to predicting the location of ore bodies within large-scale magmatic hydrothermal systems. The large penetration depths and the predictable nature of MeV proton trajectories and X-ray absorption enables reliable modelling of PIXE yields and the development of standardless quantitative analytical methods. This permits quantitative microanalysis of minerals at ppm levels, and more recently has enabled the development of methods for quantitative trace-element imaging and the quantitative, non-destructive analysis of individual fluid inclusions. This paper reports on recent developments in Proton Microprobe techniques with special emphasis on ore systems and fluid inclusion analysis. 6 refs., 2 figs.

Ore Characteristics and Fluid Inclusion of the Base Metal Vein Deposit in Moncong Bincanai Area, Gowa, South Sulawesi, Indonesia

Directory of Open Access Journals (Sweden)

Asmariyadi Asmariyadi

2014-07-01

Full Text Available DOI: 10.17014/ijog.v7i4.146This paper is dealing with ore characteristics and fluid inclusion of the Moncong Bincanai, Biringbulu Subregency of Gowa Regency, South Sulawesi Province, Indonesia. The mineralization is a vein type, with the orientation of N170oE /65oSW, hosted in open-space filling within basalt. The mineralization consists of galena, sphalerite, chalcopyrite, and pyrite. Vein thickness ranges from 5 - 17 cm, showing a crustiform banding texture, with a sequence from outer to centre: quartz, carbonate (siderite, sulphide. The quartz displays primary growth textures such as comb, crystalline, saccharoidal, and colloform. Analytical methods applied include AAS and fluid inclusion microthermometry. Chemical composition of the vein indicates an average of Pb = 47.92%, Cu = 1.27%, Zn = 1.02%, and Fe = 9.46%, which shows a significant concentration of Pb. Fluid inclusion microthermometry results indicate a range of formation temperature of 240 - 250C and salinity of the responsible hydrothermal fluid of 2.1 - 2.5 wt.% NaCl eq. The deposit is categorized into low-sulfidation epithermal deposits, which was formed within a range of 410 - 440 m below paleosurface.

Study of fluid inclusions in rodioactive mineralized pegmatites, dara area northern eastern desert, Egypt

International Nuclear Information System (INIS)

Ali, B.H.; Abdel Warith, A.

2003-01-01

Numerous pegmatite pockets of un zoned and zoned types are the most important rock types from the radioactive point of view. They occur at the marginal parts and higher topographic level of G.Dara younger granites. Zoned pegmatites are composed of extremely coarse-grained milky quartz core, intermediate zone and wall zone. The alteration zone is found at the contact between quartz core and intermediate zone. It is recorded the highest radioactive values due to their mineral composition, as a result of alteration processes associated with radioactive minerals. Only two alteration zones (P1 and P2) has been studied in this paper. The late magmatic alteration process (hematization, kaolinization, chloritization and fluortization) of the pegmatite resulted in the formation of chlorite, fluorite, clay minerals and carbonates (calcite) in the alteration zones as mineral assemblage. opaque minerals are found as pyrite, iron oxyhydroxide and garnet. Fluid inclusion studies by microthermometry were carried out on authigenic minerals (such as quartz and fluorite) in alteration zones (primary fluid inclusions). This study revealed that, at least two stages of the post-magmatic hydrothermal alteration are involved. The first stages of high temperature, low saline fluids are involved. The first stage is of high temperature, low saline fluids which characterized with hematization and/or chloritization resulted from fluid-rock interaction with late magmatic fluids that very probably mixed with external low salinity fluids along brittle structure. The second stage is of low temperature the main role in re high saline fluids characterized the fluoritized alteration due to consequent reaction with wall rocks and mixing with meteoric water. Mixing of low salinity meteoric water with hot a sending saline hydrothermal solution leads to ph change and continuous interaction with wall rock

Fluid inclusion study of the Witwatersrand gold-uranium ores

International Nuclear Information System (INIS)

Shepherd, T.J.

1977-01-01

Fluid inclusions, preserved in quartz pebbles of the uraniferous and auriferous Precambrian oligomictic conglomerates of the Witwatersrand Basin, provide a unique insight into the genesis of the ores. Using differences in inclusion characteristics in conjunction with intra- and inter-deformational textures for adjacent pebbles, a distinction is made between pre- and post-depositional inclusions. Excluding those related to subsequent brittle fracture, the former comprise five principal types; two of which are distinguished by the development of liquid carbon dioxide. Collectively they indicate a moderate to high pressure-temperature environment of vein quartz formation. Systematic variation in the relative abundance of these inclusion assemblages for different sections of the orefield demonstrates the importance of well-defined provenance areas or multiple entry points into the basins. A marked sympathetic relationship between uraniferous banket ores and the presence of vein quartz rich in liquid carbon dioxide inclusions, together with a corresponding antipathetic relationship for gold, strongly suggests separate sources for the metals. The temporal and spatial aspects of the association 'U-CO 2 ' also imply a uranium influx into the basin from discrete areas of the hinterland contemporaneous with the sediments. Post-depositional inclusions are subordinate and offer no support for the alternative epigenetic model and show only a later interaction of relatively cool circulating groundwaters. A discussion is given of the probable nature and origin of uranium in the source rocks and its mode of transportation. In conclusion, a proposal is made for the use of applied fluid inclusion research in the evaluation of and exploration for similar deposits. (author)

Pressure–Temperature–Fluid Constraints for the Poona Emerald Deposits, Western Australia: Fluid Inclusion and Stable Isotope Studies

Directory of Open Access Journals (Sweden)

Dan Marshall

2016-12-01

Full Text Available Emerald from the deposits at Poona shows micrometre-scale chemical, optical, and cathodoluminescence zonation. This zonation, combined with fluid inclusion and isotope studies, indicates early emerald precipitation from a single-phase saline fluid of approximately 12 weight percent NaCl equivalent, over the temperature range of 335–525 °C and pressures ranging from 70 to 400 MPa. The large range in pressure and temperature likely reflects some post entrapment changes and re-equilibration of oxygen isotopes. Secondary emerald-hosted fluid inclusions indicate subsequent emerald precipitation from higher salinity fluids. Likewise, the δ18O-δD of channel fluids extracted from Poona emerald is consistent with multiple origins yielding both igneous and metamorphic signatures. The combined multiple generations of emerald precipitation, different fluid compositions, and the presence of both metamorphic and igneous fluids trapped in emerald, likely indicate a protracted history of emerald precipitation at Poona conforming to both an igneous and a metamorphic origin at various times during regional lower amphibolite to greenschist facies metamorphism over the period ~2710–2660 Ma.

Inclusive Education in Government Primary Schools: Teacher Perceptions

Science.gov (United States)

Khan, Itfaq Khaliq; Hashmi, ShujahatHaider; Khanum, Nabeela

2017-01-01

The perceptions of primary school teachers towards inclusive education was investigated in mainstream government schools of Islamabad capital territory where inclusive education was being supported by Sight savers and other international organizations. The study was carried out involving 54 teachers in six randomly selected primary schools. The…

Analysis of single oil-bearing fluid inclusions in mid-Proterozoic sandstones (Roper Group, Australia)

Science.gov (United States)

Siljeström, Sandra; Volk, Herbert; George, Simon C.; Lausmaa, Jukka; Sjövall, Peter; Dutkiewicz, Adriana; Hode, Tomas

2013-12-01

Hydrocarbons and organic biomarkers extracted from black shales and other carbonaceous sedimentary rocks are valuable sources of information on the biodiversity and environment of early Earth. However, many Precambrian hydrocarbons including biomarkers are suspected of being younger contamination. An alternative approach is to study biomarkers trapped in oil-bearing fluid inclusions by bulk crushing samples and subsequently analysing the extracted hydrocarbons with gas chromatography-mass spectrometry. However, this method does not constrain the hydrocarbons to one particular oil inclusion, which means that if several different generations of oil inclusions are present in the sample, a mix of the content from these oil inclusions will be analysed. In addition, samples with few and/or small inclusions are often below the detection limit. Recently, we showed that it is possible to detect organic biomarkers in single oil-bearing fluid inclusions using time-of-flight secondary ion mass spectrometry (ToF-SIMS). In the present study, single fluid inclusion analysis has been performed on Proterozoic samples for the first time. Four individual oil-bearing fluid inclusions, found in 1430 Ma sandstone from the Roper Superbasin in Northern Australia, were analysed with ToF-SIMS. The ToF-SIMS spectra of the oil in the different inclusions are very similar to each other and are consistent with the presence of n-alkanes/branched alkanes, monocyclic alkanes, bicyclic alkanes, aromatic hydrocarbons, and tetracyclic and pentacyclic hydrocarbons. These results are in agreement with those obtained from bulk crushing of inclusions trapped in the same samples. The capability to analyse the hydrocarbon and biomarker composition of single oil-bearing fluid inclusions is a major breakthrough, as it opens up a way of obtaining molecular compositional data on ancient oils without the ambiguity of the origin of these hydrocarbons. Additionally, this finding suggests that it will be possible

Investigations of alteration zones based on fluid inclusion microthermometry at Sungun porphyry copper deposit, Iran

Directory of Open Access Journals (Sweden)

Omid ASGHARI

2010-06-01

Full Text Available The Sungun porphyry copper deposit is located in East Azerbaijan, NW of Iran. The porphyries occur as stocks and dikes ranging in composition from quartz monzodiorite to quartz monzonite. Four types of hypogene alteration are developed; potassic, phyllic, propylitic and argillic. Three types of fluid inclusions are typically observed at Sungun; (1 vapor-rich, (2 liquid-rich and (3 multi-phase. Halite is the principal solid phase in the latter. The primary multiphase inclusions within the quartz crystals were chosen for micro-thermometric analyses and considered to calculate the geological pressure and hydrothermal fluid density. In potassic zone, the average of homogenization temperature is 413.6 °C while in phyllic alteration, 375.9 °C. As expected in potassic alteration, the temperature of hydrothermal solutions is higher than that in the phyllic zone. The salinity of the hydrothermal fluids has a high coherency with homogenization temperature, so the average of salinity in potassic samples is 46.3 (wt% NaCl which is higher than phyllic samples. Based on the location of potassic alteration, as expected, the lithostatic pressure is much more than the phyllic one. Finally, the average density of hydrothermal fluids in the potassically altered samples is 1.124 (gr/cm3 which is higher than the ones in phyllic zone (1.083 gr/cm3 .

Practical aspects of quantitative laser Raman microprobe spectroscopy for the study of fluid inclusions

International Nuclear Information System (INIS)

Pasteris, J.D.; Wopenka, B.; Seitz, J.C.

1988-01-01

This paper is addressed to both geologists who use laser Raman microprobe (LRM) spectroscopy to analyze fluid inclusions and to those who want to evaluate analyses done by this technique. Emphasis is on how to obtain quantitative analyses of fluid inclusions. The authors discuss the basic method of fluid inclusion analysis by LRM spectroscopy and the levels of accuracy and precision attainable with this technique. They evaluate which kinds of fluid inclusions and host mineral matrices will yield the most reliable compositional data. Necessary sample preparations, detection limits, problems with fluorescence, dependence of Raman scattering efficiencies on density, and many other questions asked at the workshop on Raman spectroscopy during the 1987 ACROFI meeting also are addressed. The complementary nature, advantages, and disadvantages of both LRM spectroscopy and microthermometry, the two techniques most frequently used for the analysis of individual fluid inclusions, are emphasized. Some discussions are intended to held LRM users calibrate, and evaluate the optical characteristics of, their particular instruments. It is hoped that this paper will further LRM users in finding a common ground on which to discuss the differences and similarities among different LRM instruments, and that it will encourage a future consensus on efficient means of calibration and on interlaboratory standards

Isotope analysis of water trapped in fluid inclusions in deep sea corals

Science.gov (United States)

Vonhof, Hubert; Reijmer, John; Feenstra, Eline; Mienis, Furu

2015-04-01

Extant Lophelia pertusa deep sea coral specimens from the Loachev mound region in the North Atlantic Ocean contain water filled fluid inclusions in their skeleton. This fluid inclusion water was extracted with a crushing device, and its hydrogen and oxygen isotope ratios analysed. The resulting data span a wide range of isotope values which are remarkably different from the seawater isotope composition of the sites studied. Comparison with food source isotope signatures suggests that coral inclusion water contains a high, but variable proportion of metabolic water. The isotope composition of the inclusion water appears to vary with the position on the deep see coral reef, and shows a correlation with the stable isotope composition of the coral aragonite. This correlation seems to suggest that growth rate and other ecological factors play an important role in determining the isotope composition of fluids trapped in the coral skeleton, which can potentially be developed as a proxy for non-equilibrium isotope fractionation observed in the aragonite skeleton of many of the common deep sea coral species.

Laser microprobe analyses of Cl, Br, I, and K in fluid inclusions: Implications for sources of salinity in some ancient hydrothermal fluids

Science.gov (United States)

Böhlke, J.K.; Irwin, J.J.

1992-01-01

The relative concentrations of Cl, Br, I, and K in fluid inclusions in hydrothermal minerals were measured by laser microprobe noble gas mass spectrometry on irradiated samples containing 10−10 to 10−8 L of fluid. Distinctive halogen signatures indicate contrasting sources of fluid salinity in fluid inclusions from representative “magmatic” (St. Austell), “metamorphic” (Alleghany), and “geothermal” (Creede, Salton Sea) aqueous systems. Br/Cl mol ratios are lowest at Salton Sea (0.27–0.33 × 10−3), where high salinities are largely due to halite dissolution; intermediate at St. Austell (0.85 × 10−3), possibly representative of magmatic volatiles; and highest (near that of seawater) at Creede (1.5–2.1 × 10−3) and Alleghany (1.2–2.4 × 10−3), where dissolved halogens probably were leached from volcanic and (or) nonevaporitic sedimentary rocks. IC1">IC1 mol ratios are lowest (near that of seawater) at Creede (1–14 × 10−6), possibly because organisms scavenged I during low temperature recharge; intermediate at Salton Sea (24–26 × 10−6) and St. Austell (81× 10−6); and highest at Alleghany (320–940 × 10−6), probably because the fluids interacted with organic-rich sediments at high temperatures before being trapped. KCl">KCl mol ratios indicate disequilibrium with respect to hypothetical feldspathic alkali-Al-silicate mineral buffers at fluid inclusion trapping temperatures at Creede, and large contributions of (Na, K)-bicarbonate to total fluid ionic strength at Alleghany. Significant variations in Cl/Br/I/K ratios among different fluid inclusion types are correlated with previously documented mineralization stages at Creede, and with the apparent oxidation state of dissolved carbon at Alleghany. The new data indicate that Cl/ Br/I ratios in hydrothermal fluid inclusions vary by several orders of magnitude, as they do in modern surface and ground waters. This study demonstrates that halogen signatures of fluid inclusions

RAMAN SPECTRA OF AQUEOUS FLUID INCLUSIONS: EFFECT OF MINERAL BIREFRINGENCE AND METASTABILITY ON SALINITY MEASUREMENT

OpenAIRE

Caumon , Marie-Camille; Tarantola , Alexandre

2014-01-01

International audience; Introduction: Crustal fluids play a major role in ore deposits, basin diagenesis and metamorphic reactions, among others. The knowledge of the chemical composition of individual fluid inclusions is essential for the understanding of past fluid transport and circulations. Microthermometry, by the observation of specific phase transitions as a function of temperature, is the general approach to determine salinity in aqueous fluid inclusions [1]. However in some cases, th...

The fluid inclusion study in petroleum exploration; O estudo de inclusoes fluidas na exploracao de petroleo

Energy Technology Data Exchange (ETDEWEB)

Coelho, Carlos Eduardo Silva [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Gerencia da Geoquimica]. E-mail: cescoelho@petrobras.com.br

2005-05-01

Several oil companies and research centers have been studying petroleum fluid inclusions in reservoirs since the 1980's. The first works have used the fluid inclusion microthermometry technique in order to interpret the thermal history and petroleum migration in relation to the burial history and diagenesis. Lately, the micro thermometric data is being used as a calibration parameter for thermal history modeling in sedimentary basins and reservoirs. Recently, new fluid inclusion study techniques are being used in petroleum exploration. Geochemical data of low molecular weight (up to C{sub 15}) oil-bearing fluid inclusions has been used with the purpose of pinpointing oil-bearing intervals in wells that have not revealed the presence of oil by conventional techniques. Molecular geochemical analyses of oils inside the inclusions technique enable oil-source correlations, oil-oil correlations, and maturity determination. (author)

Inclusive Education in Government Primary Schools: Teacher Perceptions

Directory of Open Access Journals (Sweden)

Itfaq Khaliq Khan

2017-06-01

Full Text Available The perceptions of primary school teachers towards inclusive education was investigated in mainstream government schools of Islamabad capital territory where inclusive education was being supported by Sight savers and other international organizations. The study was carried out involving 54 teachers in six randomly selected primary schools. The sampled group comprised both, teachers trained in inclusive education and teachers working in same schools, but not trained in inclusive education. Purposive sampling method was used to select the teachers. Structured questionnaire (Likert Scale and structured interview method was used for data collection. The results of the study revealed that inclusive education is considered to be a desirable practice. The teachers believed that all learners regardless of their disabilities should be in regular classrooms and they showed more favorable attitude towards children with mild disabilities, but were not very optimistic about children with severe disabilities. The study also recognized teachers’ capacity as an essential component of inclusive education and recommends that inclusive education should be a part of pre and in-service teacher education.

On modifications of fluid inclusions in quartz : re-equilibration experiments and thermodynamical calculations on fluids in natural quartz

NARCIS (Netherlands)

Bakker, R.J.

1992-01-01

Fluids in rocks can be traced to great depths, and are found in crustal rocks as well as in mantle rocks. Information about the deep fluid which is obtained from fluid inclusions must be handled with care, for the way up after entrapment in a crystal is long and full of interferences at different

Geochemical and geophysical investigations, and fluid inclusion studies in the exploration area of Zafarghand (Northeast Isfahan, Iran

Directory of Open Access Journals (Sweden)

Zahra Alaminia

2017-11-01

producing maps resulting from the detecting of anomaly or threshold values from the background (Aitchison, 1986; Sun et al., 2009. Anomalies of Cu, Mo, Au, Ag, Pb, Zn and Sb were determined by Mean + 2 standard deviation (Cheng, 2007; Zuo et al., 2009; Chen et al., 2016. Geochemical maps for these elements in rocks and soils (Fig. 4 show significant contrasts in haloes concentrations within the diorite and dacite rocks in the southeast of the study area. The addition of concentrations in rocks is suggested indicating that a district-scale geochemical present is confined to either base metals or precious metals. The obtained fluid inclusion results are compiled in Table 3. Primary fluid inclusions in quartz mostly consist of two-phases and rarely three phases. Homogenization temperatures (Th in quartz samples represent wide variations from 123° to 550°C. They were classified according to the mode of homogenization into two immiscible types (Fig. 8: These are early inclusions stage with a high Th (between 328° and 550°C and late stage inclusions with a low Th (between 123° and 390°C. The salinity measured using the equation of Bodnar (1993 for fluid inclusions varies from 1.15 to 43 eqv.wt% NaCl. It was divided into two groups including high salinity (32 to 43 eqv.wt% NaCl and low salinity (1.15 to 5.16 eqv.wt% NaCl. Discussion The predictive results obtained by field observations, geochemical and micro thermometric studies are in good agreement with the known deposits. Geochemical anomalies are associated with phyllic and rare silicified altered rocks. The host rocks of anomalies are mainly dacite and diorite, respectively with an Eocene and younger age. District-scale geochemical patterns of several elements (Cu, Mo, Au, Pb, Ag, As, and Sb in the surface coincide with the southeastern area and can be used to explore for epithermal and/or porphyry-type deposits. Anomalies of Cu and Mo are suitable for targeting Cu-Mo mineralization. Weak anomalies associated with Au

Ancient microbes from halite fluid inclusions: optimized surface sterilization and DNA extraction.

Directory of Open Access Journals (Sweden)

Krithivasan Sankaranarayanan

Full Text Available Fluid inclusions in evaporite minerals (halite, gypsum, etc. potentially preserve genetic records of microbial diversity and changing environmental conditions of Earth's hydrosphere for nearly one billion years. Here we describe a robust protocol for surface sterilization and retrieval of DNA from fluid inclusions in halite that, unlike previously published methods, guarantees removal of potentially contaminating surface-bound DNA. The protocol involves microscopic visualization of cell structures, deliberate surface contamination followed by surface sterilization with acid and bleach washes, and DNA extraction using Amicon centrifugal filters. Methods were verified on halite crystals of four different ages from Saline Valley, California (modern, 36 ka, 64 ka, and 150 ka, with retrieval of algal and archaeal DNA, and characterization of the algal community using ITS1 sequences. The protocol we developed opens up new avenues for study of ancient microbial ecosystems in fluid inclusions, understanding microbial evolution across geological time, and investigating the antiquity of life on earth and other parts of the solar system.

Ancient microbes from halite fluid inclusions: optimized surface sterilization and DNA extraction.

Science.gov (United States)

Sankaranarayanan, Krithivasan; Timofeeff, Michael N; Spathis, Rita; Lowenstein, Tim K; Lum, J Koji

2011-01-01

Fluid inclusions in evaporite minerals (halite, gypsum, etc.) potentially preserve genetic records of microbial diversity and changing environmental conditions of Earth's hydrosphere for nearly one billion years. Here we describe a robust protocol for surface sterilization and retrieval of DNA from fluid inclusions in halite that, unlike previously published methods, guarantees removal of potentially contaminating surface-bound DNA. The protocol involves microscopic visualization of cell structures, deliberate surface contamination followed by surface sterilization with acid and bleach washes, and DNA extraction using Amicon centrifugal filters. Methods were verified on halite crystals of four different ages from Saline Valley, California (modern, 36 ka, 64 ka, and 150 ka), with retrieval of algal and archaeal DNA, and characterization of the algal community using ITS1 sequences. The protocol we developed opens up new avenues for study of ancient microbial ecosystems in fluid inclusions, understanding microbial evolution across geological time, and investigating the antiquity of life on earth and other parts of the solar system.

Limit for the Survivability from Potassium Decay of Bacterial Spores in Halite Fluid Inclusions

Science.gov (United States)

Kminek, G.; Bada, J. L.

2001-12-01

Vreeland et al.1 recently claimed to have isolated and cultured a viable spore forming halotolerant bacterium from a 250 million year old brine inclusion present in a salt crystal from the Salado formation. An earlier report suggested that viable bacterial spores could be revived from samples obtained from insects entombed in 25-40 million year old Dominican amber2. On the bases of these reports, Parkes3 raised the question of whether bacterial spores under some conditions might be effectively immortal. Sporulation, induced by an adverse change in the environmental conditions, is able to stabilize the DNA primarily against hydrolytic depurination for extended periods of time4. However, the organism is still exposed to ionizing radiation from the environment. Dormant spores have a reduced sensitivity to ionizing radiation per se, but unlike active organisms are unable to repair DNA damage encountered during long-term exposure to ionizing radiation. The accumulated damage may overwhelm any repair mechanism that starts in the early stage of spore germination5. The main radionuclide in a halite fluid inclusion is 40K, which accounts for 0.0117% of natural potassium. 40K decays via beta decay to 40Ca and via electron capture to 40Ar, releasing a primary gamma-ray. About 83.3 % of the beta's emitted are in the energy range of 0.3-1.3 MeV. We assume 7 g/l for an average concentration of natural potassium in a halite fluid inclusion, which means that the amount of 40K in a 10 μ l fluid inclusion is 8.19 ng. We have chosen a 10 μ l because this volume is typical of that used to obtain chemical data and in the attempts to extract bacteria. Less than a percent of the gamma decay energy is absorbed in a fluid inclusion of 10 μ l. Thus, we will not take the gamma decay energy into account for the further discussion. Almost all the beta energy is absorbed in the fluid inclusion. The total decay energy absorbed in a time period of 250 million years is about 87 kGy. The most

Stable isotope signatures of gases liberated from fluid inclusions in bedrock at Olkiluoto

International Nuclear Information System (INIS)

Eichinger, F.; Meier, D.; Haemmerli, J.; Diamond, L.

2010-12-01

Fluid inclusions in quartzes of the Olkiluoto bedrock contain gaseous N 2 , CO 2 , H 2 , CH 4 , and higher hydrocarbons in varying proportions. Stable carbon and hydrogen isotope signatures of the gas phases give valuable information on their origin and the formation conditions. In previous studies, a method to liberate and quantify the gases trapped in fluid inclusions was developed. It allowed determining the carbon isotope signatures of liberated CO 2 , CH 4 and higher hydrocarbons (HHC), but no hydrogen isotope data were acquired. The method was advanced and, in this study, also stable hydrogen isotopes of CH 4 and H 2 liberated from fluid inclusions could be analysed. The stable carbon signatures of methane and higher hydrocarbons, as well as the hydrogen isotope signatures of methane indicate a predominant thermogenic provenance for those gases. (orig.)

Analysis of hopanes and steranes in single oil-bearing fluid inclusions using time-of-flight secondary ion mass spectrometry (ToF-SIMS).

Science.gov (United States)

Siljeström, S; Lausmaa, J; Sjövall, P; Broman, C; Thiel, V; Hode, T

2010-01-01

Steranes and hopanes are organic biomarkers used as indicators for the first appearance of eukaryotes and cyanobacteria on Earth. Oil-bearing fluid inclusions may provide a contamination-free source of Precambrian biomarkers, as the oil has been secluded from the environment since the formation of the inclusion. However, analysis of biomarkers in single oil-bearing fluid inclusions, which is often necessary due to the presence of different generations of inclusions, has not been possible due to the small size of most inclusions. Here, we have used time-of-flight secondary ion mass spectrometry (ToF-SIMS) to monitor in real time the opening of individual inclusions trapped in hydrothermal veins of fluorite and calcite and containing oil from Ordovician source rocks. Opening of the inclusions was performed by using a focused C(60)(+) ion beam and the in situ content was precisely analysed for C(27)-C(29) steranes and C(29)-C(32) hopanes using Bi(3)(+) as primary ions. The capacity to unambiguously detect these biomarkers in the picoliter amount of crude oil from a single, normal-sized (15-30 mum in diameter) inclusion makes the approach promising in the search of organic biomarkers for life's early evolution on Earth.

Fluid inclusion characteristics and geological significance of the Dajinshan W-Sn polymetallic deposit in Yunfu, Guangdong Province

Science.gov (United States)

Yu, Zhangfa; Chen, Maohong; Zhao, Haijie

2015-05-01

The Dajinshan tungsten-tin polymetallic deposit is a quartz-vein-type ore deposit located in Western Guangdong Province. The ore bodies show a fairly simple shape and mainly occur as tungsten-tin polymetallic-bearing sulfide quartz veins, including quartz vein, quartz-greisens, and sulfide quartz veins, and their distribution is spatially related to Dajinshan granitoids. The formation of the deposit experienced three stages: a wolframite-molybdenite-quartz stage, a wolframite-cassiterite-sulfide-quartz stage, and a fluorite-calcite-carbonate stage. Based on detailed petrographic observations, we conducted microthermometric and Raman microspectroscopic studies of fluid inclusions formed at different ore-forming stages in the Dajinshan tungsten-tin polymetallic deposit, identifying four dominant types of fluid inclusions: aqueous two-phase inclusions, CO2-bearing inclusions, solid or daughter mineral-bearing inclusions, and gas-rich inclusions. The gas compositions of ore-forming fluids in the Dajinshan tungsten-tin polymetallic deposit are mostly CO2, CH4, and H2O. The hydrogen, oxygen, and sulfur isotopic data imply that the ore-forming fluids in the Dajinshan tungsten-tin polymetallic deposit were mainly derived from magmatic fluids, mixed with meteoric water in the ore-formation process. These results indicate that the fluid mixing and boiling led to the decomposition of the metal complex in ore-forming fluids and ore deposition.

Fluid-inclusion data on samples from Creede, Colorado, in relation to mineral paragenesis

Science.gov (United States)

Woods, T.L.; Roedder, Edwin; Bethke, P.M.

1982-01-01

Published and unpublished data on 2575 fluid inclusions in ore and gangue minerals from the Creede, Colorado, Ag-Pb-Zn-Cu vein deposit collected in our laboratories from 1959 to 1981 have shown that the average salinity (wt. % NaCl equivalent, hereinafter termed wt.% eq.) and homogenization temperature (Th), and the ranges of these two parameters for fluid inclusions in sphalerite, quartz, fluorite, and rhodochrosite, respectively, are 8.1 (4.6 - 13.4), 239?C (195-274?C); 6.1 (1.1-10.0), 260?C (190->400?C); 10.7 (6.1-11.1), 217?C (213-229?C) and 260?C (247-268?C) (bimodal distribution of Th); and 9.9 (9.3 - 10.6), 214?C (185-249?C). Inclusions have been measured in minerals from four of the five stages of mineralization previously recognized at Creede. The few inclusions of fluids depositing rhodochrosite (A-stage, earliest in the paragenesis) yield Th and salinity values more similar to those of the low-temperature (average Th 217?C) fluids forming some of the much later fluorite (C-stage) than to any of the other fluids. Th measurements on A-stage quartz range from 192?C to 263?C and average 237?C. The early, fine-grained, B-stage sphalerites yielded Th of 214 to 241?C and salinities of 6.1 to 10.2 wt. % eq. D-stage sphalerite (late in the paragenesis) has been studied in detail (growth-zone by growth-zone) for several localities along the OH vein and reveals a generally positive correlation among Th, salinity and iron content of the host sphalerite. The deposition of D-stage sphalerite was characterized by repeated cycling through different regions of salinity/Th space, as Th and salinity generally decreased with time. Seventeen salinity-Th measurements were made on D-stage sphalerite from one locality on the Bulldog Mountain vein system, which, like the OH vein, is one of four major ore-producing vein systems at Creede. These data suggest a lower Th for a given salinity fluid from sphalerite on the Bulldog Mountain vein than on the OH vein. The very high values

Direct 40Ar/39Ar age determination of fluid inclusions using in-vacuo¬ stepwise crushing - Example of garnet from the Cycladic Blueschist Unit on Syros

Science.gov (United States)

Uunk, Bertram; Postma, Onno; Wijbrans, Jan; Brouwer, Fraukje

2017-04-01

Metamorphic minerals and veins commonly trap attending hydrous fluids in fluid inclusions, which yield a wealth of information on the history of the hosting metamorphic system. When these fluids are sufficiently saline, the KCl in the inclusions can be used as a K/Ar geochronologic system, potentially dating inclusion incorporation. Whilst primary fluid inclusions (PFIs) can date fluid incorporation during mineral or vein growth, secondary fluid inclusion trails (SFIs) can provide age constraints on later fluid flow events. At VU Amsterdam, a new in-vacuo crushing apparatus has been designed to extract fluid inclusions from minerals for 40Ar/39Ar analysis. Separates are crushed inside a crusher tube connected to a purification line and a quadrupole mass spectrometer. In-vacuo crushing is achieved by lifting and dropping a steel pestle using an externally controlled magnetic field. As the gas can be analyzed between different crushing steps, the setup permits stepwise crushing experiments. Additionally, crushed powder can be heated by inserting the crusher tube in an externally controlled furnace. Dating by 40Ar/39Ar stepwise crushing has the added advantage that, during neutron irradiation to produce 39Ar from 39K, 38Ar and 37Ar are also produced from 38Cl and 40Ca, respectively. Simultaneous analysis of these argon isotopes permits constraining the chemistry of the argon source sampled during the experiment. This allows a distinction between different fluid or crystal lattice sources. Garnet from three samples of the HP metamorphic Cycladic Blueschist Unit on Syros, Greece was stepwise crushed to obtain fluid inclusion ages. Initial steps for all three experiments yield significant components of excess argon, which are interpreted to originate from grain boundary fluids and secondary fluid inclusions trails. During subsequent steps, age results stabilize to a plateau age. One garnet from North Syros yields an unusually old 80 Ma plateau age. However, isochrons

A New Equivalent Statistical Damage Constitutive Model on Rock Block Mixed Up with Fluid Inclusions

Directory of Open Access Journals (Sweden)

Xiao Chen

2018-01-01

Full Text Available So far, there are few studies concerning the effect of closed “fluid inclusions” on the macroscopic constitutive relation of deep rock. Fluid-matrix element (FME is defined based on rock element in statistical damage model. The properties of FME are related to the size of inclusions, fluid properties, and pore pressure. Using FME, the equivalent elastic modulus of rock block containing fluid inclusions is obtained with Eshelby inclusion theory and the double M-T homogenization method. The new statistical damage model of rock is established on the equivalent elastic modulus. Besides, the porosity and confining pressure are important influencing factors of the model. The model reflects the initial damage (void and fluid inclusion and the macroscopic deformation law of rock, which is an improvement of the traditional statistical damage model. Additionally, the model can not only be consistent with the rock damage experiment date and three-axis compression experiment date of rock containing pore water but also describe the locked-in stress experiment in rock-like material. It is a new fundamental study of the constitutive relation of locked-in stress in deep rock mass.

AqSo_NaCl: Computer program to calculate p-T-V-x properties in the H2O-NaCl fluid system applied to fluid inclusion research and pore fluid calculation

Science.gov (United States)

Bakker, Ronald J.

2018-06-01

The program AqSo_NaCl has been developed to calculate pressure - molar volume - temperature - composition (p-V-T-x) properties, enthalpy, and heat capacity of the binary H2O-NaCl system. The algorithms are designed in BASIC within the Xojo programming environment, and can be operated as stand-alone project with Macintosh-, Windows-, and Unix-based operating systems. A series of ten self-instructive interfaces (modules) are developed to calculate fluid inclusion properties and pore fluid properties. The modules may be used to calculate properties of pure NaCl, the halite-liquidus, the halite-vapourus, dew-point and bubble-point curves (liquid-vapour), critical point, and SLV solid-liquid-vapour curves at temperatures above 0.1 °C (with halite) and below 0.1 °C (with ice or hydrohalite). Isochores of homogeneous fluids and unmixed fluids in a closed system can be calculated and exported to a.txt file. Isochores calculated for fluid inclusions can be corrected according to the volumetric properties of quartz. Microthermometric data, i.e. dissolution temperatures and homogenization temperatures, can be used to calculated bulk fluid properties of fluid inclusions. Alternatively, in the absence of total homogenization temperature the volume fraction of the liquid phase in fluid inclusions can be used to obtain bulk properties.

Mineralogical and Fluid Inclusions Evidence For The Genesis of Umm Addebaa-Umm Kabu Beryl Belt, South Eastern Desert, Egypt

International Nuclear Information System (INIS)

Omar, S.A.M.

2016-01-01

Beryl mineralization in quartz veins and pegmatites, are common deposits of tectonic-hydrothermal and/or igneous origin. The beryl-specialized granites association at Umm Addebaa-Umm Kabu belt is manifested in the field by the development of a system of beryl-bearing pegmatitic pods and quartz veins. The emplacement of these syn-tectonic pegmatitic leucogranites from which K- and Be-rich fluid phases were derived, are confined to the shear zones, as well as a broad zone of alkali metasomatism. Microthermometic studies of primary fluid inclusions within beryl growth zones are consistent with beryl precipitation from H 2 O-CO 2 ± CH 4 bearing saline brines. The estimated fluid composition is approximately 0.88 mol% H 2 O, 0.017 mol% CO 2 ± 0.001 mol% CH 4 and 0.10 mol% NaCl (2- 11 wt.% NaCl eq.). Fluid inclusion results are consistent with that mineralization in pegmatites and quartz veins that are formed by two genetic stages. The first stage is characterized by temperature of formation in the range of 216.4 - 378.3 °C, with corresponding pressures along fluid inclusion isochore paths ranging from 1.04 to 2.25 bar. The second stage is of aqueous fluid represented with low temperature (177-255°C) and pressure ≤ 1 bar, but high saline (16-22 wt.% NaCl eq.) which might explain mixing of the early carbonaceous fluid with late meteoric water accompanied with pressure release. Thus, it can be inferred that the Be-bearing solutions were moderately saline, but CO 2 (and possible CH 4 )-rich fluid implies that Be was most probably complexed by carbonate ( + CH 4 ) - chloride base. The different paragenetic types of emerald and beryl associated with granitoid rocks indicates that the chemistry of the Be-bearing fluids (rather than that of the bulk rock), and syn-tectonic intrusions of leucogranites and pegmatites (Be deriving sources) along major ductile shear zones are the important factors controlling the crystallization of beryl.

Petrography and fluid inclusions study in Marbin porphyry Molybdenum (Sn) index (northeast of Isfahan)

International Nuclear Information System (INIS)

Mirzaei, M.; Bagheri, H.; Ayati, F.

2016-01-01

Marbin Tin and Molybdenum index is located in north of Zefreh Village the Isfahan Province and Uromieh-Dokhtar magmatic zone. The main rock units in this area are Eocene subvolcanic and volcanic rocks with rhyolite to dacite composition. Based on petrography studies the main minerals are plagioclase, quartz, sanidine and biotite and secondary minerals are chlorite, calcite, epidote and sericite. The main hydrothermal alterations are including sericitic, propylitic, intermediate argillic and silisification. Average grade of tin, molybdenum, copper and gold is about 4850, 157, 330 ppm and 82 ppb, respectively. Microthermometric studies on silica veins and veinlet indicate five different types of fluid inclusion, 1-three-phase type (L+V+S→L), 2- three-phase type (L+V+S→V), 3- two-phase type (L+V→L), 4- two-phase type (V+L→V), 5- vapor rich single phase type (V). Fluid inclusion studies in mineralized veins in phyllic and propylitic zones, show the wide range of homogenization temperature from 248 to 600 ºC and salinity from 28 to 65 wt% NaCl equivalent. The temperature, salinity and density of fluids decrease from phyllic to propylitic alteration zone. The wide range of homogenization temperatures for the studied fluid inclusions in index show dilution with surface water and fluid boiling, as the most important factor in ore deposition. According to field, mineralogical, geochemical and fluid inclusion studies Marbin index has been considered as a porphyry deposit type which show the most similarity with Mo porphyry systems in world wide.

Study of genesis in Qahr-Abad fluorite deposit using fluid inclusion, southeast of Saqqez, the Kurdistan province

Directory of Open Access Journals (Sweden)

Mehrdad Barati

2017-07-01

Department of geology of the Karazmy University. Results Petrography and classification of inclusions: The samples used for the inclusion study were doubly polished sections of fluorite from mineralization stages 1 to 2. A number of inclusion types were identified. These include negative crystals and elongate round, polygonal or irregular shapes with a size range from <1 µm to several tens of µm. Based on their petrographic characteristics at room temperature and phase change characteristics during the heating process, inclusions were grouped into three principal types. Here we just discuss primary and pseudo secondary fluid inclusions, mainly including three fluid inclusions as follows: 1 (vapor + liquid or (L+V and negative crystal fluid inclusions, each of which will provide more believable information for the mineralization hydrothermal fluid. These fluid inclusions in fluorite are, isolated, and irregular or rectangular with 10 μm to 20μm long major axes. They include two phases at room temperature, an aqueous liquid (L and some kind of carbonic vapor phase (V, and have L/ (V +L Fillinge ratio values of 90–95%. Abundant fluid inclusions are present. 2 fluorite that are generally quadrilateral in shape, have 2–20 μm long major axes, and occur as clusters or form trails. These fluid inclusions contain three phases at room temperature depending on the density of the nonaqueous gases in the fluid inclusions and have nonaqueous phase ratios of around 5%. They have major axes 2–15 μm long. They contain two phases and have L/ (V + L volume ratio values around 0.95%. 3 Fluid inclusions in some fluorite are rare. Most of them are isolated and roughly circular. They have 2–10 μm long major axes, and contain four phases as (liquid+ vapor + daughter mineral 1+ daughter mineral 2 or (L+V+S1+S2 and have L/(V + L volume ratios of 90–92% at room temperature. Some twin fluid inclusions were also identified in this type and analyzed during this study

Pre-Service Primary Teachers' Attitudes towards Inclusive Education

Science.gov (United States)

Varcoe, Linda; Boyle, Christopher

2014-01-01

Research has demonstrated that an important factor in the success of inclusive education is dependent upon teachers' attitudes. Based on this evidence, the present study investigated the impact of a range of teacher variables in association with training on primary pre-service teachers' attitudes by examining total inclusion scores, positive…

Pressure-temperature condition and hydrothermal-magmatic fluid evolution of the Cu-Mo Senj deposit, Central Alborz: fluid inclusion evidence

Directory of Open Access Journals (Sweden)

Ebrahim Tale Fazel

2017-02-01

Full Text Available Introduction The Senj deposit has significant potential for different types of mineralization, particularly porphyry-like Cu deposits, associated with subduction-related Eocene–Oligocene calc-alkaline porphyritic volcano-plutonic rocks. The study of fluid inclusions in hydrothermal ore deposits aims to identify and characterize the pressure, temperature, volume and fluid composition, (PTX conditions of fluids under which they were trapped (Heinrich et al., 1999; Ulrich and Heinrich, 2001; Redmond et al., 2004. Different characteristics of the deposit such as porphyrtic nature, alteration assemblage and the quartz-sulfide veins of the stockwork were poorly known. In this approach on the basis of alterations, vein cutting relationship and field distribution of fluid inclusions, the physical and chemical evolution of the hydrothermal system forming the porphyry Cu-Mo (±Au-Ag deposit in Senj is reconstructed. Materials and Methods Over 1000 m of drill core was logged at a scale of 1:1000 by Pichab Kavosh Co. and samples containing various vein and alteration types from different depths were collected for laboratory analyses. A total of 14 samples collected from the altered and least altered igneous rocks in the Senj deposit were analyzed for their major oxide concentrations by X-ray fluorescence in the SGS Mineral Services (Toronto, Canada. The detection limit for major oxide analysis is 0.01%. Trace and rare earth elements (REE were analyzed using inductively coupled plasma-mass spectrometery (ICP-MS, in the commercial laboratory of SGS Mineral Services. The analytical error for most elements is less than 2%. The detection limit for trace elements and REEs analysis is 0.01 to 0.1 ppm. Fluid inclusion microthermometry was conducted using a Linkam THMS600 heating–freezing stage (-190 °C to +600 °C mounted on a ZEISS Axioplan2 microscope in the fluid inclusion laboratory of the Iranian Mineral Processing Research Center (Karaj, Iran. Results

Composition of fluid inclusions in Permian salt beds, Palo Duro Basin, Texas, U.S.A.

Science.gov (United States)

Roedder, E.; d'Angelo, W. M.; Dorrzapf, A.F.; Aruscavage, P. J.

1987-01-01

Several methods have been developed and used to extract and chemically analyze the two major types of fluid inclusions in bedded salt from the Palo Duro Basin, Texas. Data on the ratio K: Ca: Mg were obtained on a few of the clouds of tiny inclusions in "chevron" salt, representing the brines from which the salt originally crystallized. Much more complete quantitative data (Na, K, Ca, Mg, Sr, Cl, SO4 and Br) were obtained on ??? 120 individual "large" (mostly ???500 ??m on an edge, i.e., ??? ??? 1.6 ?? 10-4 g) inclusions in recrystallized salt. These latter fluids have a wide range of compositions, even in a given piece of core, indicating that fluids of grossly different composition were present in these salt beds during the several (?) stages of recrystallization. The analytical results indicating very large inter-and intra-sample chemical variation verify the conclusion reached earlier, from petrography and microthermometry, that the inclusion fluids in salt and their solutes are generally polygenetic. The diversity in composition stems from the combination of a variety of sources for the fluids (Permian sea, meteoric, and groundwater, as well as later migrating ground-, formation, or meteoric waters of unknown age), and a variety of subsequent geochemical processes of dissolution, precipitation and rock-water interaction. The compositional data are frequently ambiguous but do provide constraints and may eventually yield a coherent history of the events that produced these beds. Such an understanding of the past history of the evaporite sequence of the Palo Duro Basin should help in predicting the future role of the fluids in the salt if a nuclear waste repository is sited there. ?? 1987.

Magmatic fluid inclusions from the Zaldivar Deposits, Northern Chile: The role of early metal-bearing fluids in a Porphyry copper system

NARCIS (Netherlands)

drs Campos, E.; Touret, J.L.R.; Nikogosian, I.

2006-01-01

The occurrence of a distinct type of multi-solid, highly-saline fluid inclusions, hosted in igneous quartz phenocrysts from the Llamo porphyry, in the Zaldívar porphyry copper deposit of northern Chile is documented. Total homogenization of the multi-solid type inclusions occurs at magmatic

"Magmatic fluid inclusions from the Zaldivar deposit, Northern Chile: The role of Early metal-bearing fluids in a porphyry copper system."

NARCIS (Netherlands)

drs Campos, E.; Touret, J.L.R.; Nikogosian, I.

2006-01-01

The occurrence of a distinct type of multi-solid, highly-saline fluid inclusions, hosted in igneous quartz phenocrysts from the Llamo porphyry, in the Zaldívar porphyry copper deposit of northern Chile is documented. Total homogenization of the multi-solid type inclusions occurs at magmatic

In situ quantification of Br and Cl in minerals and fluid inclusions by LA-ICP-MS: a powerful tool to identify fluid sources

Science.gov (United States)

Hammerli, Johannes; Rusk, Brian; Spandler, Carl; Emsbo, Poul; Oliver, Nicholas H.S.

2013-01-01

Bromine and chlorine are important halogens for fluid source identification in the Earth's crust, but until recently we lacked routine analytical techniques to determine the concentration of these elements in situ on a micrometer scale in minerals and fluid inclusions. In this study, we evaluate the potential of in situ Cl and Br measurements by LA-ICP-MS through analysis of a range of scapolite grains with known Cl and Br concentrations. We assess the effects of varying spot sizes, variable plasma energy and resolve the contribution of polyatomic interferences on Br measurements. Using well-characterised natural scapolite standards, we show that LA-ICP-MS analysis allows measurement of Br and Cl concentrations in scapolite, and fluid inclusions as small as 16 μm in diameter and potentially in sodalite and a variety of other minerals, such as apatite, biotite, and amphibole. As a demonstration of the accuracy and potential of Cl and Br analyses by LA-ICP-MS, we analysed natural fluid inclusions hosted in sphalerite and compared them to crush and leach ion chromatography Cl/Br analyses. Limit of detection for Br is ~8 μg g−1, whereas relatively high Cl concentrations (> 500 μg g−1) are required for quantification by LA-ICP-MS. In general, our LA-ICP-MS fluid inclusion results agree well with ion chromatography (IC) data. Additionally, combined cathodoluminescence and LA-ICP-MS analyses on natural scapolites within a well-studied regional metamorphic suite in South Australia demonstrate that Cl and Br can be quantified with a ~25 μm resolution in natural minerals. This technique can be applied to resolve a range of hydrothermal geology problems, including determining the origins of ore forming brines and ore deposition processes, mapping metamorphic and hydrothermal fluid provinces and pathways, and constraining the effects of fluid–rock reactions and fluid mixing.

Stable isotope composition of fluid inclusions preserved in halite derived from Wieliczka and Bochnia beds (southern Poland)

International Nuclear Information System (INIS)

Dulinski, M.; Rozanski, K.; Alexandrowicz, Z.; Chmura, A.

1999-01-01

Halite deposits located in the southern Poland, near Krakow, are famous mostly due to medieval salt mine located in Wieliczka. Contrary to most salt deposits in Europe forming large domes, the halite deposits near Krakow form distinct beds, extending from west to east on the area of ca. 10 km 2 , with several types of salt identified. The deposits were formed in Miocene, ca. 15 mln years ago. Stable isotope composition of fluid inclusions trapped in the halite crystals originating from Wieliczka and Bochnia salt mines was investigated. Two distinct groups of samples were analyzed: (i) samples derived from so-called 'green salt' beds forming extensive horizontal structures, and (ii) large monocrystals of halite collected in crystal caves which form a part of the tourist tract within the Wieliczka Salt Mine. The samples belonging to the first group were heated under vacuum to extract the fluid inclusions, according to the procedure developed in our laboratory and used previously to extract inclusions from speleothem samples. The macro-inclusions present in some monocrystals of halite collected in crystal caves were removed or analysis without any thermal treatment. The concentration of bivalent cations (Ca 2+ , Mg 2- was measured in the bulk material and in fluid inclusions (only second group). The 2 H and 18 O isotope composition of fluid inclusions extracted from halite samples was measured

Fluid properties control degassing or storage of abiogenic CH4 during slab exhumation: the fluid inclusion record from the Western Alps.

Science.gov (United States)

Ferrando, S.; Castelli, D.; Frezzotti, M. L.

2017-12-01

Abiogenic CH4 can be produced by interaction between carbonates and reducing fluids derived from the hydration of ultramafics (e.g., mantle peridotite or HP Ol-serpentinite). This process occurs during slab exhumation because cooling promotes serpentinization of olivine in presence of water (Fo + H2O = Atg + Brc and the linked reactions: Fa + H2O = Fe-Atg + Mag + H2 and Atg + CaCO3 + H2 = Di + Brc + CH4 + H2O) at ca. 500-375°C (P=2.0-0.2 GPa). Experiments in the CH4-H2O-NaCl system indicate that, at these conditions, fluids are immiscible even for very low salinity (ca. 3 wt%) and that the NaCl content in the aqueous part of the fluid increases with temperature whereas the CH4 content in the gaseous part shows an opposite trend (Lamb et al., 2002; Li, 2017).In HP rodingite from the Piemonte ophiolite Zone (W Alps), primary fluid inclusions consisting of a brine (6 wt% CaCl2 + 6 wt% NaCl) with H2 + CH4 ≤ 1 mol % [CH4/(H2+CH4) = 0.37-10] occur in vesuvianite veins that formed at P=0.2 GPa and T=375°C. We interpret them as the aqueous part of an immiscible reducing fluid produced during late Alpine serpentinization of the surrounding ultramafics. Interestingly, CH4-H2 gaseous fluids are never reported in rodingite, whereas early CH4-H2O-H2±graphite and CH4-H2±graphite fluid inclusions, with variable gas-water proportions, trapped in calcite at P≤1.0 GPa and T≤450°C, are recently reported from HP "graphitized" ophicarbonate from the Lanzo peridotite Massif (W Alps; Vitale Brovarone et al., 2017).Both HP ophiolites and partially-serpentinized peridotite massifs are, thus, efficient lithologies to produce CH4 during exhumation. The amount of released CH4 depends on the amount of water available during exhumation. However, when fluids immiscibility occurs, the gaseous-rich part (CH4-H2) of the immiscible fluid produced in ultramafics likely remains confined in the slab because it is less mobile with respect to the aqueous-rich part due to its high dihedral

Magmatic Vapor Phase Transport of Copper in Reduced Porphyry Copper-Gold Deposits: Evidence From PIXE Microanalysis of Fluid Inclusions

Science.gov (United States)

Rowins, S. M.; Yeats, C. J.; Ryan, C. G.

2002-05-01

Nondestructive proton-induced X-ray emission (PIXE) studies of magmatic fluid inclusions in granite-related Sn-W deposits [1] reveal that copper transport out of reduced felsic magmas is favored by low-salinity vapor and not co-existing high-salinity liquid (halite-saturated brine). Copper transport by magmatic vapor also has been documented in oxidized porphyry Cu-Au deposits, but the magnitude of Cu partitioning into the vapor compared to the brine generally is less pronounced than in the reduced magmatic Sn-W systems [2]. Consideration of these microanalytical data leads to the hypothesis that Cu and, by inference, Au in the recently established "reduced porphyry copper-gold" (RPCG) subclass should partition preferentially into vapor and not high-salinity liquid exsolving directly from fluid-saturated magmas [3-4]. To test this hypothesis, PIXE microanalysis of primary fluid inclusions in quartz-sulfide (pyrite, pyrrhotite & chalcopyrite) veins from two RPCG deposits was undertaken using the CSIRO-GEMOC nuclear microprobe. PIXE microanalysis for the ~30 Ma San Anton deposit (Mexico) was done on halite-saturated aqueous brine (deposit (W. Australia) was done on halite-saturated "aqueous" inclusions, which contain a small (deposits of the new RPCG subclass demonstrate the greater potential of these systems, compared to the classically oxidized porphyry Cu-Au systems, to transport Cu and probably precious metals in a magmatic aqueous vapor phase. These PIXE data also support the possibility that Cu partitions preferentially into an immiscible CO2-rich magmatic fluid. References: [1] Heinrich, C.A. et al. (1992) Econ. Geol., 87, 1566-1583. [2] Heinrich, C.A. et al. (1999) Geology, 27, 755-758. [3] Rowins, S.M. (2000) Geology, 28, 491-494. [4] Rowins, S.M. (2000) The Gangue, GAC-MDD Newsletter, 67, 1-7 (www.gac.ca). [5] Rowins, S.M. et al. (1993) Geol. Soc. Australia Abs., 34, 68-70.

The Lagoa Real uranium province, Bahia state, Brazil: some petrographic aspects and fluid inclusion studies

International Nuclear Information System (INIS)

Fuzikawa, K.; Alves, J.V.; Cuney, M.; Kostolanyl, C.; Poti, B.

1988-01-01

The Lagoa Real Uranium Province in the central-southern Bahia State, consisting of six deposits and several prospects, has a reserve of near one hundred tons of U 3 O 8 . The main lithological unit in the area is the Lagoa Real Complex which is formed by granites and gneisses derived from them. The unit overthrusts the Espinhaco metasediments the west. The Complex is the host of albities which may contain uraninite. The mineralization is manly associated with pyroxene and garnet. Petrographic and field relations indicate the overthrusting as the latest event, having left implants in the orebodies and their hosts. Fluid inclusion studies indicated fluids of different characteristics in the Espinhaco and the Lagoa Real Complex although they were similar in composition (carbonic and aqueous). The types inclusions detected are in agreement with the geologic processes suggested for the area: emplacement of the Sao Timoteo granite at 1.72 Ga; albitization and uranium mineralization at ∼ 1.4 Ga; and metamorphism at ∼ 0.49 Ga. The study is an example of fluid inclusion behaviour in a metamorphic process with very limited amount of fluids. (author) [pt

Search for Fluid Inclusions in a Carbonaceous Chondrite Using a New X-Ray Micro-Tomography Technique Combined with FIB Sampling

Science.gov (United States)

Tsuchiyama, A.; Miyake, A.; Zolensky, M. E.; Uesugi, K.; Nakano, T.; Takeuchi, A.; Suzuki, Y.; Yoshida, K.

2014-01-01

Early solar system aqueous fluids are preserved in some H chondrites as aqueous fluid inclusions in halite (e.g., [1]). Although potential fluid inclusions are also expected in carbonaceous chondrites [2], they have not been surely confirmed. In order to search for these fluid inclusions, we have developped a new X-ray micro-tomography technique combined with FIB sampling and applied this techniqu to a carbanaceous chondrite. Experimental: A polished thin section of Sutter's Mill meteorite (CM) was observed with an optical microscope and FE-SEM (JEOL 7001F) for chosing mineral grains of carbonates (mainly calcite) and sulfides (FeS and ZnS) 20-50 microns in typical size, which may have aqueous fluid inclusions. Then, a "house" similar to a cube with a roof (20-30 microns in size) is sampled from the mineral grain by using FIB (FEI Quanta 200 3DS). Then, the house was atached to a thin W-needle by FIB and imaged by a SR-based imaging microtomography system with a Fresnel zone plate at beamline BL47XU, SPring-8, Japan. One sample was imaged at two X-ray energies, 7 and 8 keV, to identify mineral phases (dual-enegy microtomography: [3]). The size of voxel (pixel in 3D) was 50-80 nm, which gave the effective spatial resolution of approx. 200 nm. A terrestrial quartz sample with an aqueous fluid inclusion with a bubble was also examined as a test sample by the same method. Results and discussion: A fluid inclusion of 5-8 microns in quartz was clearly identified in a CT image. A bubble of approx. 4 microns was also identified as refraction contrast although the X-ray absorption difference between fluid and bubble is small. Volumes of the fluid and bubble were obtained from the 3D CT images. Fourteen grains of calcite, two grains of iron sulfide and one grain of (Zn,Fe)S were examined. Ten calcite, one iron sulfide and one (Zn,Fe)S grains have inclusions >1 micron in size (the maximum: approx. 5 microns). The shapes are spherical or irregular. Tiny inclusions (tiny solid

Characterization of fluid inclusions and sulfur isotopes in the Iju porphyry copper deposit, North West of Shahr-e-Babak

Directory of Open Access Journals (Sweden)

Malihe Golestani

2017-07-01

Full Text Available Introduction The Iju porphyry copper deposit is located in the southern part of the Urumieh-Dokhtar magmatic arc (Dehaj-Sarduieh belt within the Kerman copper belt (Dimitrijevic, 1973. The Porphyry Copper mineralization in the Iranian plate occurs dominantly along the Urumieh-Dokhtar arc, which has resulted from the subduction of the Arabian plate beneath the central Iran and the closure of the Neo-Tethys Ocean during the Alpine orogeny (Hassanzadeh, 1993. The Iju porphyry copper deposit with 25 million tons of ore reserves is one of the main copper deposits within the Kerman copper belt. The mining area is composed of upper Miocene volcanic and subvolcanic rocks (mineralized and barren subvolcanic rocks and quaternary deposits. Two hydrothermal alteration zones of quartz-sericite-pyrite and propylitic zones can be identified in the Iju area. The copper mineralization in the Iju deposit occurs as disseminated, stockwork and hydrothermal breccia. In the hypogene zone, the mineral paragenesis include chalcopyrite, pyrite, with minor occurrences of bornite and magnetite. This paper reports geological, mineralogical, fluid inclusion and S isotope data from the Iju deposit in order to investigate ore-bearing fluids’ characteristics and the mechanisms of ore deposition. Materials and methods Fifteen samples of syngenetic quartz+pyrite bearing veinlets within the quartz-sericite-pyrite zone were selected from different depths across the seven boreholes. Quartz was used for double-polished thin sections and pyrite was used for sulfur isotope analysis. Fluid inclusion studies were performed using the Linkam cooling and heating stage, the THMSG 600 model. The syngenetic pyrite with thermometry quartz sample was used for the sulfur isotope experiments. Stable isotope analysis was performed at the Hatch Stable Isotope Laboratory in the University of Ottawa, Canada. Results The fluid inclusions of the Iju deposit represent a wide range in the

Preliminary results on the petrology and fluid inclusions of the Rossing uraniferous alaskites

International Nuclear Information System (INIS)

Cuney, M.

1980-01-01

Petrography, radioactivity distribution and fluid inclusions have been studied in three samples of the Rossing alaskites from the S.H. anomaly outside of the Rossing deposit. After the crystallization of the alaskitic magma which involved oligoclase, biotite, orthoclase and quartz, a deuteric alteration produced a quartz, microcline, albite, muscovite, calcite plus minus chlorite mineral association similar to those observed in several French uraniferous granites. Uranium redistribution occurred during this alteration. From fluid inclusions data, the pressure at the time of the intrusion is estimated to have been at least 6kbar for a temperature of 625 degrees Celsius. Reaction of the magma with the marbles of the Rossing formation led to the boiling of the magma by an increase in the CO 2 partial pressure as well as to its crystallization. Immiscibility between a dense saline (more than 30 per cent NaCl) and CO 2 -rich fluid is proposed to have occurred simultaneously or after the fluid oversaturation of the magma. Part of uraninite is formed at the magmatic stage, another part crystallized from the magmatic fluids in the biotite-rich selvages of the alaskites or in the uraninite-fluorite veins. Uraninite crystallization appears to be mainly controlled by the oxygen fugacity prevailing in the magma and in the surrounding rocks

From Attitudes to Practice: Utilising Inclusive Teaching Strategies in Kenyan Primary Schools

Science.gov (United States)

Elder, Brent C.; Damiani, Michelle L.; Oswago, Benson O.

2016-01-01

The purpose of this paper is to provide evidence of Kenyan primary school teachers using inclusive teaching strategies in a rural setting with many known barriers to the development of a sustainable inclusive education system. This qualitative study examines teachers' uses of inclusive teaching strategies in primary schools following a series of…

A note on fluid inclusion study of quartz from uraniferous migmatites from Sirsoti area, Sonbhadra district, Uttar Pradesh, India

International Nuclear Information System (INIS)

Ramana Murthy, K.V.; Shobhita, K.; Gorikhan, R.A.; Bhattacharya, A.K.

1993-01-01

Fluid inclusion study has been carried out on quartz from uraniferous migmatitic rocks of Sirsoti area of Sonbhadra District, Uttar Pradesh. The fluid inclusions in quartz are of two types viz. (i) H 2 O liquid + vapour and (ii) H 2 O liquid + CO 2 liquid + CO 2 gas. Homogenization temperatures of H 2 O liquid + vapour type inclusions indicate that the temperature of formation varied between 150-350degC. Ice melting temperatures indicate that the hydrothermal solutions were CO 2 -bearing with a salinity of 6-8% NaCl. A common range of homogenization temperature for both liquid-rich as well as vapour-rich inclusions provides evidence for the boiling of the ore fluids. (author). 5 refs., 7 figs

Origin and Timing of Dauphiné Twins Using Fluid Inclusions in Quartz-Cement Fractures in Sandstones from Diagenetic Environments

Science.gov (United States)

Fall, A.; Ukar, E.; Laubach, S.

2016-12-01

Dauphiné twins in quartz are widespread in many tectonometamorphic environments. Under diagenetic temperatures (fluid inclusion trails. The association of Dauphiné twins and fluid inclusion trails from which temperature and possibly timing can be inferred provides a way to research mechanism and timing of twinning, and potentially the magnitude of paleostrain and stress in some diagenetic settings. Using examples from East Texas and Colorado cores, we show that twins are associated with crack-seal microstructure and fluid inclusions. Fracture wall-parallel and wall-normal inclusion trails contain coexisting aqueous and hydrocarbon gas inclusions, so homogenization temperatures of aqueous inclusions, ranging from 130°C to 159°C in the East Texas Basin, and from 162°C to 176°C in the Piceance Basin, record true trapping temperatures. Inclusions in wall-normal trails are large and irregularly shaped compared to those in wall-parallel trails, but both show similar liquid-to-vapor ratios. Trapping temperatures for wall-normal inclusion trails are usually higher than those in the wall-parallel trails. Wall-normal fluid inclusion assemblage temperatures typically match the highest temperatures of wall-parallel assemblages trapped during sequential widening, but not necessarily the most recent. In context of burial histories for these samples, this temperature pattern implies that wall-normal assemblages form at discrete times during or after crack-seal fracture widening. Stacking transmitted light images with scanning electron microscope cathodoluminescence (SEM-CL) and electron backscattered diffraction (EBSD) images demonstrates that the twin boundaries are localized along wall-normal inclusion trails. Localization in isolated, potentially high-stress quartz deposits in fractures is compatible with a mechanical origin for these Dauphiné twins. Punctuated temperature values and discrepant sizes and shapes of inclusions in wall-normal trails imply that twinning is

The study of mineralization and fluid inclusion in Dehsalm Mahour 2 lead deposit, east of Lut block, Central Iran

Directory of Open Access Journals (Sweden)

Fateme Mohammadpour

2016-09-01

Full Text Available The Mahour 2 lead mineralization area is located, about 145 km west of Nehbandan and 2 km northwest of Mahour polymetal deposit and in the eastern part of Lut Block. The area comprises of volcanic and pyroclastic rocks (Eocene intruded by several intrusive rocks mainly as dioritic dykes and stocks. Mineralization as veins and filling the space, occurred in altered andesitic rocks. Supergene zone is characterized by azurite, malachite, linarite and iron oxides (hematite and limonite whereas, galena, pyrite, chalcopyrite and magnetite are the main minerals of hypogene zone. And, quartz and calcite are main gangue. The area is dominated by four types of alteration including silicic, sericitic, propylitic, and argillic. Fluid inclusions study on quartz mineral sections polished reveals the presence of 1.0 to 5.6 percent salt and homogeneous temperature between 278 to 570 ° C. The high temperature with low salinity zone mineralization in this area is likely related to another generation of mineralization in the area. The results of fluid inclusions show that the mineralization is probably a mixture of magmatic fluid and atmospheric, although there is doubt. Several similar criteria including form of deposit, primary ore deposit, alteration facies, tectonic environment and magmatic series document that there should be a correlation between the origin of the studied mineralization area and that of the Mahour polymetal deposit.

C-O-H-S magmatic fluid system in shrinkage bubbles of melt inclusions

Science.gov (United States)

Robidoux, P.; Frezzotti, M. L.; Hauri, E. H.; Aiuppa, A.

2016-12-01

Magmatic volatiles include multiple phases in the C-O-H-S system of shrinkage bubbles for which a conceptual model is still unclear during melt inclusion formation [1,2,3,4]. The present study aims to qualitatively explore the evolution of the volatile migration, during and after the formation of the shrinkage bubble in melt inclusions trapped by olivines from Holocene to present at San Cristóbal volcano (Nicaragua), Central American Volcanic Arc (CAVA). Combined scanning electron microscope (SEM) and Raman spectroscopy observations allow to define the mineral-fluid phases inside typical shrinkage bubbles at ambient temperature. The existence of residual liquid water is demonstrated in the shrinkage bubbles of naturally quenched melt inclusion and this water could represents the principal agent for chemical reactions with other dissolved ionic species (SO42-, CO32-, etc.) and major elements (Mg, Fe, Cu, etc.) [4,5]. With the objective of following the cooling story of the bubble-inclusion system, the new methodological approach here estimate the interval of equilibrium temperatures for each SEM-Raman identified mineral phase (carbonates, hydrous carbonates, sulfurs, sulfates, etc.). Finally, two distinct mechanisms are proposed to describe the evolution of this heterogeneous fluid system in bubble samples at San Cristóbal which imply a close re-examination for similar volcanoes in subduction zone settings: (1) bubbles are already contracted and filled by volatiles by diffusion processes from the glass and leading to a C-O-H-S fluid-glass reaction enriched in Mg-Fe-Cu elements (2) bubbles are formed by oversaturation of the volatiles from the magma which is producing an immiscible metal-rich fluid. [1]Moore et al. (2015). Am. Mineral. 100, 806-823 [2]Wallace et al. (2015). Am. Mineral. 100, 787-794 [3]Lowenstern (2015). Am. Mineral. 100, 672-673 [4]Esposito, et al. (2016). Am. Mineral. 101, 1691-1708 [5]Kamenetsky et al. (2001). Earth Planet. Sci. Lett. 184, 685-702

Mantle metasomatism in the Kaapvaal Craton lithosphere: constraints on the composition of the metasomatic agent from fluid inclusions in MARID-type xenoliths

Science.gov (United States)

Konzett, J.; Krenn, K.; Hauzenberger, Ch.

2012-04-01

The emplacement of both group I and group II kimberlites in the Kaapvaal Craton of the Kimberley region in South Africa is associated with an intense metasomatic alteration of the country rocks as evidenced by a diverse suite of xenoliths sampled by the kimberlites mainly comprising metasomatized peridotites and minor MARID-type xenoliths. These are characterized by hydrous potassic silicates and LILE-HFSE-rich titanates. Because the metasomatic agent is not preserved in these rocks its composition has to be inferred from that of the metasomatic assemblages. Here we present for the first time data on fluid inclusions from two MARID-xenoliths sampled by group-I kimberlites of the Kimberley cluster. They provide direct evidence for the nature of the metasomatic fluids involved in kimberlite-related metsomatism. The xenoliths contain phlogopite+K-richterite+diopside+ilmenite±rutile±apatite±zircon. Fluid inclusions with 4-10 µm in size were found in diopside, K-richterite and zircon and contain L+V+one-to-several daughter phases. Investigations with the freezing and heating stage indicate two different chemical systems for the fluids: (1) H2O-NaCl dominant fluids found as L+V+S inclusions in zircon together with abundant needle-like apatite, rutile and phlogopite solid inclusions. The fluid inclusions in part occur along zircon host-rutile/apatite inclusion grain boundaries which indicates that the fluids were trapped during zircon growth. They contain 30-32 mass% NaCl and show a density of 0.87-0.94 g/cm3. Halos of tiny fluid inclusions, however, indicate that most if not all zircon inclusions are decrepitated during ascent from depth and/or superheating during entrainment of the xenoliths into the kimberlite. Using EMPA, enstatite and a SiO2 polymorph were identified in opened fluid inclusions exposed at the surface of polished thin sections. Because these phases were exclusively found in the fluid inclusions, they are considered daughter crystals. The enstatite

Chemical Compositions of Fluid Inclusions in the Jalal –Abad iron oxide deposit, North West of Zarand, Using LA-ICP-MS Microanalysis

Directory of Open Access Journals (Sweden)

Behrouz Karimi Shahraki

2017-07-01

forms being massive, disseminated, replacement, open space filling, veins and breccias. Immediate host rocks include sandy siltstone, acidic volcanic rocks and dolomite. The Jalal Abad deposit mainly consists of iron oxides (magnetite, hematite and goethite, pyrite, chalcopyrite, and malachite that occur in massive, brecciated, open space filling, disseminated and vein forms. Hematite mostly occurs close to the surface and along fractured zones, formed as a secondary mineral due to magnetite oxidation and it is rare at depth. Pyrite is the most important sulphide mineral and is associated with magnetite, calcite, quartz, talc, dolomite, actinolite and chlorite. Copper mineralization at shallow levels is mainly in oxides formed from sulphide oxidation and at deeper levels primary chalcopyrite is also associated with magnetite. Cu mineralization is formed as disseminated or in veins form. Native gold was detected as inclusions smaller than 50 µm in chalcopyrite. Common alteration minerals are goethite, pyrite, talc, actinolite, chlorite, tremolite, dolomite, quartz, calcite, albite and sericite. The earliest hydrothermal alteration includes Na-Ca alteration which is associated with actinolite, magnetite and pyrite. Multiphase fluid inclusions (L+V+S in quartz are abundant and homogenization temperatures are in the range of 260 to 440◦C. Salinities vary between 30 to 52 wt% NaCl equivalents. The concentrations of Na and K are in the range 26906 to 140716 ppm and 2372 to 70484 ppm, respectively. Fe content varies from 576 to16076 ppm with an average of 6914 ppm and Cu contents vary from 51 to 3204 ppm with a mean of 792 ppm. The Na/Ca values for fluid inclusions vary from 0.38 to 37.51 with a mean of 3.79. The average content of Na is 61511 ppm which is in agreement with salinity of fluid inclusions measured by microthermometry techniques. Magmatic fluids normally yield K > Ca, with Ca/K ratios between 0.01 to 1, whereas non magmatic fluids are often richer in Ca with Ca

Gas chromatographic analysis of volatiles in fluid and gas inclusions

Science.gov (United States)

Andrawes, F.; Holzer, G.; Roedder, E.; Gibson, E.K.; Oro, John

1984-01-01

Most geological samples and some synthetic materials contain fluid inclusions. These inclusions preserve for us tiny samples of the liquid and/or the gas phase that was present during formation, although in some cases they may have undergone significant changes from the original material. Studies of the current composition of the inclusions provide data on both the original composition and the change since trapping.These inclusions are seldom larger than 1 millimeter in diameter. The composition varies from a single major compound (e.g., water) in a single phase to a very complex mixture in one or more phases. The concentration of some of the compounds present may be at trace levels.We present here some analyses of inclusions in a variety of geological samples, including diamonds. We used a sample crusher and a gas chromatography—mass spectrometry (GC—MS) system to analyze for organic and inorganic volatiles present as major to trace constituents in inclusions. The crusher is a hardened stainless-steel piston cylinder apparatus with tungsten carbide crusing surfaces, and is operated in a pure helium atmosphere at a controlled temperature.Samples ranging from 1 mg to 1 g were crushed and the released volatiles were analyzed using multi-chromatographic columns and detectors, including the sensitive helium ionization detector. Identification of the GC peaks was carried out by GC—MS. This combination of procedures has been shown to provide geochemically useful information on the process involved in the history of the samples analyzed.

A new method for synthesizing fluid inclusions in fused silica capillaries containing organic and inorganic material

Science.gov (United States)

Chou, I.-Ming; Song, Yucai; Burruss, R. C.

2008-11-01

Considerable advances in our understanding of physicochemical properties of geological fluids and their roles in many geological processes have been achieved by the use of synthetic fluid inclusions. We have developed a new method to synthesize fluid inclusions containing organic and inorganic material in fused silica capillary tubing. We have used both round (0.3 mm OD and 0.05 or 0.1 mm ID) and square cross-section tubing (0.3 × 0.3 mm with 0.05 × 0.05 mm or 0.1 × 0.1 mm cavities). For microthermometric measurements in a USGS-type heating-cooling stage, sample capsules must be less than 25 mm in length. The square-sectioned capsules have the advantage of providing images without optical distortion. However, the maximum internal pressure ( P; about 100 MPa at 22 °C) and temperature ( T; about 500 °C) maintained by the square-sectioned capsules are less than those held by the round-sectioned capsules (about 300 MPa at room T, and T up to 650 °C). The fused silica capsules can be applied to a wide range of problems of interest in fluid inclusion and hydrothermal research, such as creating standards for the calibration of thermocouples in heating-cooling stages and frequency shifts in Raman spectrometers. The fused silica capsules can also be used as containers for hydrothermal reactions, especially for organic samples, including individual hydrocarbons, crude oils, and gases, such as cracking of C 18H 38 between 350 and 400 °C, isotopic exchanges between C 18H 38 and D 2O and between C 19D 40 and H 2O at similar temperatures. Results of these types of studies provide information on the kinetics of oil cracking and the changes of oil composition under thermal stress. When compared with synthesis of fluid inclusions formed by healing fractures in quartz or other minerals or by overgrowth of quartz at elevated P- T conditions, the new fused-silica method has the following advantages: (1) it is simple; (2) fluid inclusions without the presence of water can be

Lithospheric magma dynamics beneath the El Hierro Volcano, Canary Islands: insights from fluid inclusions

Science.gov (United States)

Oglialoro, E.; Frezzotti, M. L.; Ferrando, S.; Tiraboschi, C.; Principe, C.; Groppelli, G.; Villa, I. M.

2017-10-01

At active volcanoes, petrological studies have been proven to be a reliable approach in defining the depth conditions of magma transport and storage in both the mantle and the crust. Based on fluid inclusion and mineral geothermobarometry in mantle xenoliths, we propose a model for the magma plumbing system of the Island of El Hierro (Canary Islands). The peridotites studied here were entrained in a lava flow exposed in the El Yulan Valley. These lavas are part of the rift volcanism that occurred on El Hierro at approximately 40-30 ka. The peridotites are spinel lherzolites, harzburgites, and dunites which equilibrated in the shallow mantle at pressures between 1.5 and 2 GPa and at temperatures between 800 and 950 °C (low-temperature peridotites; LT), as well as at higher equilibration temperatures of 900 to 1100 °C (high-temperature peridotites; HT). Microthermometry and Raman analyses of fluid inclusions reveal trapping of two distinct fluid phases: early type I metasomatic CO2-N2 fluids ( X N2 = 0.01-0.18; fluid density (d) = 1.19 g/cm3), coexisting with silicate-carbonate melts in LT peridotites, and late type II pure CO2 fluids in both LT (d = 1.11-1.00 and 0.75-0.65 g/cm3) and HT ( d = 1.04-1.11 and 0.75-0.65 g/cm3) peridotites. While type I fluids represent metasomatic phases in the deep oceanic lithosphere (at depths of 60-65 km) before the onset of magmatic activity, type II CO2 fluids testify to two fluid trapping episodes during the ascent of xenoliths in their host mafic magmas. Identification of magma accumulation zones through interpretation of type II CO2 fluid inclusions and mineral geothermobarometry indicate the presence of a vertically stacked system of interconnected small magma reservoirs in the shallow lithospheric mantle between a depth of 22 and 36 km (or 0.67 to 1 GPa). This magma accumulation region fed a short-lived magma storage region located in the lower oceanic crust at a depth of 10-12 km (or 0.26-0.34 GPa). Following our model

Mineralogical, stable isotope, and fluid inclusion studies of spatially related porphyry Cu and epithermal Au-Te mineralization, Fakos Peninsula, Limnos Island, Greece

Science.gov (United States)

Fornadel, Andrew P.; Voudouris, Panagiotis Ch.; Spry, Paul G.; Melfos, Vasilios

2012-05-01

of magmatic fluids with meteoric water in the epithermal environment is responsible for the dilution of the ore fluids that formed Stage 3 veins. Eutectic melting temperatures of -35.4 to -24.3 °C for Type I inclusions hosted in both porphyry- and epithermal-style veins suggest the presence of CaCl2, MgCl2, and/or FeCl2 in the magmatic-hydrothermal fluids. Sulfur isotope values of pyrite, galena, sphalerite, and molybdenite range from δ34S = -6.82 to -0.82 per mil and overlap for porphyry and epithermal sulfides, which suggests a common sulfur source for the two styles of mineralization. The source of sulfur in the system was likely the Fakos quartz monzonite for which the isotopically light sulfur isotope values are the result of changes in oxidation state during sulfide deposition (i.e., boiling) and/or disproportionation of sulfur-rich magmatic volatiles upon cooling. It is less likely that sulfur in the sulfides was derived from the reduction of seawater sulfate or leaching of sulfides from sedimentary rocks given the absence of primary sulfides in sedimentary rocks in the vicinity of the deposit. Late-stage barite (δ34S = 10.5 per mil) is inferred to have formed during mixing of seawater with magmatic ore fluids. Petrological, mineralogical, fluid inclusion, and sulfur isotope data indicate that the metallic mineralization at Fakos Peninsula represents an early porphyry system that is transitional to a later high- to intermediate-sulfidation epithermal gold system. This style of mineralization is similar to porphyry-epithermal metallic mineralization found elsewhere in northeastern Greece (e.g., Pagoni Rachi, St. Demetrios, St. Barbara, Perama Hill, Mavrokoryfi, and Pefka).

Attitudes of Preschool and Primary School Pre-Service Teachers towards Inclusive Education

Science.gov (United States)

Kraska, Jake; Boyle, Christopher

2014-01-01

Teachers' attitudes towards inclusion are important as they have the primary responsibility of implementing inclusive education. Attitudes at the beginning of teaching careers are likely to predict future attitudes. Some studies show a drop in attitudes after leaving university education. Using the Teachers' Attitudes Towards Inclusion (Amended)…

External micro-PIXE analysis of fluid inclusions: Test of the LABEC facility on samples of quartz veins from Apuan Alps (Italy)

International Nuclear Information System (INIS)

Massi, M.; Calusi, S.; Giuntini, L.; Ruggieri, G.; Dini, A.

2008-01-01

Fluid inclusions are small portions, usually smaller than 100 μm, of fluid trapped within minerals during or after growth. Their characteristics provide therefore fundamental information on nature and evolution of fluids present in the past in different geological environments. At the LABEC laboratory in Firenze, high-salinity fluid inclusions in quartz crystals, coming from the Apuan Alps metamorphic complex, were analysed at the external scanning microbeam. Results, although still preliminary, have already provided us with hints on fluid-rock interaction processes during the metamorphism of the Apuan Alps

External micro-PIXE analysis of fluid inclusions: Test of the LABEC facility on samples of quartz veins from Apuan Alps (Italy)

Energy Technology Data Exchange (ETDEWEB)

Massi, M. [Dipartimento di Fisica dell' Universita and INFN sezione di Firenze, via G. Sansone 1, Sesto Fiorentino 50019, Firenze (Italy)], E-mail: massi@fi.infn.it; Calusi, S. [Dipartimento di Fisica dell' Universita and INFN sezione di Torino, via P. Giuria 1, 10125 Torino (Italy); Giuntini, L. [Dipartimento di Fisica dell' Universita and INFN sezione di Firenze, via G. Sansone 1, Sesto Fiorentino 50019, Firenze (Italy); Ruggieri, G. [CNR - Istituto di Geoscienze e Georisorse sezione di Firenze, via G. La Pira 4, Firenze 50121 (Italy); Dini, A. [CNR - Istituto di Geoscienze e Georisorse sezione di Pisa, via G. Moruzzi 1, Pisa 56124 (Italy)

2008-05-15

Fluid inclusions are small portions, usually smaller than 100 {mu}m, of fluid trapped within minerals during or after growth. Their characteristics provide therefore fundamental information on nature and evolution of fluids present in the past in different geological environments. At the LABEC laboratory in Firenze, high-salinity fluid inclusions in quartz crystals, coming from the Apuan Alps metamorphic complex, were analysed at the external scanning microbeam. Results, although still preliminary, have already provided us with hints on fluid-rock interaction processes during the metamorphism of the Apuan Alps.

Fluid Inclusion Study of The Tumpangpitu High Sulfidation Epithermal Gold Deposit in Banyuwangi District, East Java, Indonesia

Directory of Open Access Journals (Sweden)

Yu Yu Myaing

2018-03-01

Full Text Available The Tumpangpitu high sulfidation (HS epithermal gold deposit is located in the south coast of East Java, Banyuwangi District, East Java Province, Indonesia. This area lies within the central portion of the Cenozoic Sunda‐Banda magmatic arc which trends southeast from northern Sumatra to west Java then eastward through east Java, Bali, Lombok, Sumbawa and terminating at Banda sea. The geology of the Tumpangpitu is predominantly occupied by Late Oligocene to Middle Miocene low-K calc-alkaline to alkaline andesitic volcanic rocks and interbedded with volcaniclastic rock sequences, which are associated with low-K intermediate intrusions. The mineralization style at the Tumpangpitu area is composed of a high‐sulfidation (HS epithermal gold-copper system which is typically associated with concealed gold-rich porphyry copper system. The HS epithermal mineralization is hosted by volcanic and volcaniclastic rocks in this research area. The mineralization domains are divided into Zone A, Zone B and Zone C which are situated along NW-SE-trending silica ledges zones. The HS epithermal mineralization is texturally occurs as vuggy replacements mineralization as well as stockworks, disseminated forms, fractures and veins. Fluid inclusion study was conducted for 6 quartz vein samples which petrographically entrapped fluid inclusions. Homogenization temperature (Th and melting temperature (Tm can microthermometrically be determined by fluid inclusion analysis. The average homogenization temperature (Th of the fluid inclusions gives 180˚C to 342˚C and melting temperature are from -0.1 ˚C to -1.4˚C. Tm corresponds to the salinities ranging from 0.1 to 4.5 wt% NaCl equivalent. The paleodepth of ore formation can be estimated from the salinity of fluid. Since the deposit was not formed at boiling condition, the minimum paleodepth of ore (quartz samples taken from both shallow level (53.35 m and deep level (135.15 m is determined at 650m and 1,220 m

Fluid inclusions and PVTX modelling: examples from the Garn Formation in well 6507/2-2, Haltenbanken, Mid-Norway

Energy Technology Data Exchange (ETDEWEB)

Teinturier, S.; Pironon, J. [CREGU-UMR, Vandoeuvre-les-Nancy (France); Walgenwitz, F. [CSTJF, TotalFinaElf, Pau (France)

2002-06-01

Fluid inclusions study and multi-techniques quantitative analyses have been coupled to reconstitute PVTX conditions of aqueous and petroleum fluid entrapment of a local Haltenbanken area (well 6507/2-2) from the Garn Formation. Unusual low temperature behaviour showing the liquid portion separating into two liquids has been described. This behaviour is typical of a gas condensate/volatile mixture with high methane content and heavy alkanes. The variable liquid-vapour ratio, compositions and morphologies of all petroleum inclusions can be interpreted as a result of a combination of heterogeneous trapping and necking down. Thus, all petroleum inclusions can be related to a single petroleum source. Three main episodes of fluid entrapment can be distinguished. The first one corresponds to the water trapped within detrital quartz microfractures, at around 50{sup o}C and 50 bar; the second to the petroleum fluid arrival in the biphase field of a critical system around 100-120{sup o}C and 190-230 bar. The third one to the main trapping of present-day petroleum inclusions during the recrystallisation of quartz cements (around 110-160{sup o}C and 230-280 bar) within the last few million years of a short and relatively rapid burial.(author)

Attitude towards Inclusive Education: The Perspective of Slovenian Preschool and Primary School Teachers

Science.gov (United States)

Štemberger, Tina; Kiswarday, Vanja Riccarda

2018-01-01

The paper is built on premises that teachers' attitude is one of the most important factors of implementing inclusive education and it focuses on preschool and primary school teachers' attitudes towards inclusive education. The purpose of the study was to establish what attitude Slovenian preschool and primary school teachers hold towards…

Fluid inclusion and sulfur stable isotope evidence for the origin of the Ahangran Pb-Ag deposit

Directory of Open Access Journals (Sweden)

Mohammad Maanijou

2015-10-01

sulfur isotope analysis. The sulfur isotopes in sulfides and sulfates were run on a Thermo Finnigan Delta Plus XP IRMS mass spectrometer. The analytical uncertainty for δ34S is ±0.2‰. Results and Discussion The main types of fluid inclusions in quartz and calcite are as follows: I: dominant liquid + less vapor (L+V; II: dominant vapor + less liquid (V + L; III: liquid + vapor+ CO2 (L+V+CO2 (L+V; IV: CO2 (L+V; V: liquid + vapor + sylvite (L+V+Sy. Homogenization temperatures of primary fluid inclusions indicate that mineralization occurred at temperatures ranging from 130 to 320 °C (ave., 200°C and their salinites range from 10 to 15 wt % NaCl equiv. The temperatures and salinities of the mineralizing fluids of the Ahangaran deposit are similar to the Irish type Zn-Pb deposits, and suggest a similar origin. The δ34S values of pyrite and galena are within the range of -25.5 to +11.6 ‰ and -6.3 to -8.5 ‰, respectively and for barite are in the range of 26 to 27.2 ‰. These values indicate that the δ34SH2S values of fluids in that deposited the pyrite and galena are within the range of -6.4 to-2.9 ‰ and 9.4 to 27.9 ‰, respectively. The δ34S values of marine sulfate were 13 to 20 ‰ during the Cretaceous (Hoefs, 2009. The δ34S values of barite are near to that of marine sulfate in the Cretaceous which indicate that the sulfate of the barite may have a marine origin. On the other hand, the δ34SH2S values of galena lie within a narrow range, suggesting that the main source of sulfur may be from thermochemical sulfate reduction (TSR. Acknowledgments In this research, we thank Sormak Mines Company for its support during field work. We also thank Sormak Mines Managers, especially Mr. Khakbaz for his cooperation and support of this research. Parts of this research were supported by the research department of Bu-Ali Sina University. We also wish to express our appreciation of the isotopic analyses by Queen's University, Canada. References Bodnar, R.J. and Vityk

CRITERIA OF FORMATION OF SOCIAL-PEDAGOGICAL COMPETENCE OF FUTURE PRIMARY SCHOOL TEACHERS IN INCLUSIVE SECONDARY SCHOOL

Directory of Open Access Journals (Sweden)

Zoia Shevtsiv

2017-03-01

Full Text Available The article aims to justify the formation of criteria and indicators of social-pedagogical competence of the future teachers of primary school of inclusive comprehensive school and to determine its level of development. The objectives are to determine the status of the development problems of professional competence of teachers in inclusive education; essence and structural components of social-pedagogical competence of future primary school teacher of inclusive comprehensive school; criteria, indicators and levels of social-pedagogical competence of future primary school teacher of inclusive comprehensive schools. The education system in Ukraine is gradually transition to inclusive education. Inclusive comprehensive school is being created. It requires a highly qualified primary school teacher who co-teaches regulatory children and children with disability. The article is grounded the necessity of social-pedagogical competence of future teachers of primary school of inclusive comprehensive schools. The essence of social-pedagogical competence of future primary school teacher of inclusive comprehensive schools is defined. The structural components of social-pedagogical competence are characterized. Scientific papers on the issue of formation of competence of experts in various fields are analyzed. The pronunciation for selection and justification criteria and parameters of formation of professional competence is overviewed. The group of the criteria suggested by various scientists from the evaluation of the formation of professional competence of specialists in different fields is considered. The criteria and parameters of evaluating the levels of social-pedagogical competence of future teachers of primary school in inclusive comprehensive schools are selected on the base of the analysis of modern achievements of scientists. Future prospects of research is in developing of a method of diagnosing the levels of social-pedagogical competence of

Fluid inclusion and oxygen-isotope evidence for low-temperature Au-Pt-Pd (± U) mineralization at Corronation Hill, NT

International Nuclear Information System (INIS)

Mernagh, T.

1992-01-01

The fluid inclusion and isotope data have been used to constrain the ore genesis models for the Au-Pt-Pd-U mineralization at Coronation Hill. The fluid inclusions demonstrate that the ore fluid was strongly saline with an unusually high CaCl 2 content, and that the mineralisation was probably formed from a boiling fluid at around 140 deg C. Furthermore, the fluids were highly oxidised and the replacement of earlier chlorite by hematite is common throughout the deposit. It is concluded that both U-rich and U-poor Au-Pt-Pd mineralisation were formed by descending, low-temperature, highly oxidised, very saline, meteoric fluids. The segregation of U was controlled by fluid-rock interaction in the feldspathic or carbonate rocks. Interaction with carbonaceous or chloritic rocks resulted in a reduction in fO 2 , and consequent precipitation of U, Au, Pt and Pd. The other two types of metal associations can be explained by further reaction of the mineralizing fluids. 3 figs

Fluid Inclusion Analysis of other Host Minerals besides Quartz: Application to Granite-Related Quartz-Topaz Veins and Garnet Skarns in Porphyry Copper-Gold Ore Systems

OpenAIRE

Schlöglova, Katerina

2018-01-01

Fluid inclusions are the only available samples of paleo-fluids responsible for crystallization of hydrothermal minerals including ore phases. Analysis of fluid inclusions implicitly assumes that the inclusions have preserved their chemical composition since the time of their entrapment. There is, however, an increasing evidence from experimental work and analytical studies of natural samples showing that inclusions hosted in quartz – a ubiquitous host in many ore-forming systems – can experi...

Fluid Force-Induced Detachment Criteria for Nonmetallic Inclusions Adhered to a Refractory/Molten Steel Interface

Science.gov (United States)

Dieguez Salgado, Uxia; Weiß, Christian; Michelic, Susanne K.; Bernhard, Christian

2018-05-01

Since nonmetallic inclusions (NMIs) in steel cannot be completely avoided, a greater understanding of their development and evolution during the steelmaking process is required. In particular, this includes the adhesion of microinclusions to the refractory/steel interface in the flow control system between the tundish and the mold. This phenomenon, commonly referred to as clogging, causes losses in productivity and product quality. Inclusions transported from the bulk melt to the boundary layer may adhere to the refractory/steel interface due to formation of a fluid cavity. A detailed model was derived for the detachment of NMIs adhering to a nozzle wall and is based on the local hydrodynamic conditions combined with the specific interfacial properties in the system consisting of the inclusions, the refractories, and the steel. The model is evaluated for three different application-oriented cases. This study has been focused on providing a better understanding of fluid flow in the near-wall region in order to reduce clogging during steelmaking.

New online method for water isotope analysis of speleothem fluid inclusions using laser absorption spectroscopy (WS-CRDS)

Science.gov (United States)

Affolter, S.; Fleitmann, D.; Leuenberger, M.

2014-07-01

A new online method to analyse water isotopes of speleothem fluid inclusions using a wavelength scanned cavity ring down spectroscopy (WS-CRDS) instrument is presented. This novel technique allows us simultaneously to measure hydrogen and oxygen isotopes for a released aliquot of water. To do so, we designed a new simple line that allows the online water extraction and isotope analysis of speleothem samples. The specificity of the method lies in the fact that fluid inclusions release is made on a standard water background, which mainly improves the δ D robustness. To saturate the line, a peristaltic pump continuously injects standard water into the line that is permanently heated to 140 °C and flushed with dry nitrogen gas. This permits instantaneous and complete vaporisation of the standard water, resulting in an artificial water background with well-known δ D and δ18O values. The speleothem sample is placed in a copper tube, attached to the line, and after system stabilisation it is crushed using a simple hydraulic device to liberate speleothem fluid inclusions water. The released water is carried by the nitrogen/standard water gas stream directly to a Picarro L1102-i for isotope determination. To test the accuracy and reproducibility of the line and to measure standard water during speleothem measurements, a syringe injection unit was added to the line. Peak evaluation is done similarly as in gas chromatography to obtain &delta D; and δ18O isotopic compositions of measured water aliquots. Precision is better than 1.5 ‰ for δ D and 0.4 ‰ for δ18O for water measurements for an extended range (-210 to 0 ‰ for δ D and -27 to 0 ‰ for δ18O) primarily dependent on the amount of water released from speleothem fluid inclusions and secondarily on the isotopic composition of the sample. The results show that WS-CRDS technology is suitable for speleothem fluid inclusion measurements and gives results that are comparable to the isotope ratio mass

Origin and timing of Dauphiné twins in quartz cement in fractured sandstones from diagenetic environments: Insight from fluid inclusions

Science.gov (United States)

Fall, András; Ukar, Estibalitz; Laubach, Stephen E.

2016-09-01

Electron backscattered diffraction techniques (EBSD) show that Dauphiné twins in quartz are widespread in many tectonometamorphic environments. Our study documents that under diagenetic temperatures (fluid inclusions. Fracture wall-parallel and wall-normal inclusion trails contain coexisting aqueous and hydrocarbon gas inclusions, so homogenization temperatures of aqueous inclusions record true trapping temperatures. Inclusions in alignments normal to fracture walls are large and irregularly shaped compared to those aligned parallel to walls, but both show similar liquid-to-vapor ratios. Stacking transmitted light images with scanning electron microscope cathodoluminescence (SEM-CL) and EBSD images demonstrates that Dauphiné twin boundaries are localized along wall-normal inclusion trails. Trapping temperatures for wall-normal inclusion trails are usually higher than those aligned parallel to the fracture wall. Wall-normal fluid inclusion assemblage temperatures typically match the highest temperatures of wall-parallel assemblages trapped during sequential widening, but not necessarily the most recent. In context of burial histories for these samples, this temperature pattern implies that wall-normal assemblages form at discrete times during or after crack-seal fracture widening. Localization in isolated, potentially high-stress quartz deposits in fractures is compatible with a mechanical origin for these Dauphiné twins. Punctuated temperature values and discrepant sizes and shapes of inclusions in wall-normal trails implies that twinning is a by-product of the formation of the wall-normal inclusion assemblages. The association of Dauphiné twins and fluid inclusion assemblages from which temperature and possibly timing can be inferred provides a way to research timing as well as magnitude of paleostress in some diagenetic settings.

UV-fs-LA-ICP-MS Analysis of CO2-Rich Fluid Inclusions in a Frozen State: Example from the Dahu Au-Mo Deposit, Xiaoqinling Region, Central China

Directory of Open Access Journals (Sweden)

Wei Jian

2018-01-01

Full Text Available The recently developed technique of ultraviolet femtosecond laser ablation inductively coupled plasma mass spectrometry (UV-fs-LA-ICP-MS combined with a freezing cell is expected to improve the analysis of CO2-rich fluid inclusions by decreasing their internal pressure and avoiding the common problem of uncontrolled explosive fluid release on ablation. Here, we report the application of this technique through the case study of CO2-rich fluid inclusions from the quartz vein-style Au-Mo deposit of Dahu in the Xiaoqinling region of central China. The concentrations of Li, B, Na, Al, K, Ca, Mn, Fe, Cu, Zn, Rb, Sr, Mo, Ag, Te, Cs, Ba, Au, Pb, and Bi were analyzed in 124 (not all for Al and Ca fluid inclusions, which have low to moderate salinity and multiphase composition (liquid H2O + liquid CO2  ± vapor CO2  ± solids. The Dahu fluids are dominated by Na and K. The concentrations of Mo are always below the detection limit from 0.005 to 2 ppm (excluding values obtained from fluid inclusions with accidentally trapped solids. The Dahu ore fluids differ from metamorphic fluids in compositions and most likely represent two separate pulses of spent fluids evolved from an unexposed and oxidized magmatic system. The UV-fs-LA-ICP-MS analysis of fluid inclusions in a frozen state improves the overpressure problem of CO2-rich fluid inclusions during laser ablation. The transformation of gaseous and liquid CO2 into the solid state leads to a significant decline in the internal pressure of the fluid inclusions, while femtosecond laser pulses generate a minimal heat input in the sample and thus maintain the frozen state during ablation. Transient signals of CO2-rich fluid inclusions obtained in this study typically had one or multiple peaks lasting for more than 15 seconds, without an initial short signal spike as obtained by ns-LA-ICP-MS analysis of CO2-rich fluid inclusions at room temperature.

Metamorphic fluid flow in the northeastern part of the 3.8-3.7 Ga Isua Greenstone Belt (SW Greenland): A re-evalution of fluid inclusion evidence for early Archean seafloor-hydrothermal systems

DEFF Research Database (Denmark)

Heijlen, Wouter; Appel, P. W. U.; Frezzotti, M. L.

2006-01-01

. In most quartz crystals, however, recrystallization obliterated such early fluid inclusion assemblages and left graphite and carbonate as solid inclusions in recrystallized grains. Intragranular fluid inclusion trails in the recrystallized grains of breccia cementing and crosscutting quartz veins have CO2...... density (ranging from 48.0 to > 105.3 cm(3)/Mol) and metastable H2O NaCl(-other salt?) brines (similar to 28 eq. wt% NaCl). Finally, the youngest fluid inclusion assemblages are found in non-luminescent secondary quartz and contain low-density CH4 (molar volume > 105.33 cm(3)/Mol) and low-salinity H2O.......5-2 kbar. The quartz globules in the pillow fragments only contain sporadic CH4(+H-2) and brine inclusions, corresponding with the late generations present in the cementing and crosscutting veins. We argue that due to the large extent of static recrystallization in quartz globules in the pillow breccia...

Motions of deformable inclusions in a horizontally oscillating vessel with a compressible fluid

DEFF Research Database (Denmark)

Demidov, I.V.; Sorokin, Vladislav

2016-01-01

The paper is concerned with the analysis of rigid particle and compressible gas bubble motion in a horizontally oscillating vessel with a compressible fluid. A nonlinear differential equation describing motion of inclusions with respect to the vessel is derived and solved by the method of direct...... of the bubbles which are affected by the negligible vibrational force is found. Also an approximate expression has been obtained for the average velocity of bubble׳s motion in the fluid; relationship between this velocity and bubble radius and vibration parameters has been revealed. A simple physical explanation...

High resolution, high sensitivity imaging and analysis of minerals and inclusions (fluid and melt) using the new CSIRO-GEMOC nuclear microprobe

International Nuclear Information System (INIS)

Ryan, C.G.; McInnes, B.M.; Van Achterbergh, E.; Williams, P.J.; Dong, G.; Zaw, K.

1999-01-01

Full text: The new CSIRO-GEMOC Nuclear Microprobe (NMP) The instrument was designed specifically for minerals analysis and imaging and to achieve ppm to sub-ppm sensitivity at a spatial resolution of 1-2 μm using X-rays and y-rays induced by MeV energy ion beams. The key feature of the design is a unique magnetic quadrupole quintuplet ion focussing system that combines high current with high spatial resolution (Ryan et al., 1999). These design goals have been achieved or exceeded. On the first day of operation, a spot-size of 1.3 μm was obtained at a beam current of 0.5 nA, suitable for fluid inclusion analysis and imaging. The spot-size grows to just 1.8 μm at 10 nA (3 MeV protons), ideal for mineralogical samples with detection limits down to 0.2 ppm achieved in quantitative, high resolution, trace element images. Applications of the NMP include: research into ore deposit processes through trace element geochemistry, mineralogy and fluid inclusion analysis of ancient deposits and active sea-floor environments, ore characterization, and fundamental studies of mantle processes and extraterrestrial material. Quantitative True Elemental Imaging Dynamic Analysis is a method for projecting quantitative major and trace element images from proton-induced X-ray emission (PIXE) data obtained using the NMP (Ryan et al., 1995). The method un-mixes full elemental spectral signatures to produce quantitative images that can be directly interrogated for the concentrations of all elements in selected areas or line projections, etc. Fluid Inclusion Analysis and Imaging The analysis of fluids trapped as fluid inclusions in minerals holds the key to understanding ore metal pathways and ore formation processes. PIXE analysis using the NMP provides a direct non-destructive method to determine the composition of these trapped fluids with detection limits down to 20 ppm. However, some PIXE results have been controversial, such as the strong partitioning of Cu into the vapour phase (e

Continental basinal origin of ore fluids from southwestern Massif central fluorite veins (Albigeois, France): evidence from fluid inclusion and stable isotope analyses

International Nuclear Information System (INIS)

Munoz, M.; Boyce, A.J.; Courjault-Rade, P.; Fallick, A.E.; Tollon, F.

1999-01-01

The most important fluorspar mining district in France is located in the Palaeozoic basement of the Albigeois in southwestern French Massif Central. The massive fluorite is hosted within large E-W striking fractures, crosscutting Cambro-Ordovician clastics, associated with large zones of hypersilicified tectonic breccia which form the wall of the mined deposits. Fluid inclusion data for pre-fluorite and fluorite stage fluids have salinities between 20-26 wt% NaCl equiv., with homogenisation temperatures between 85-170C. Furthermore, low first ice melting temperatures (around -50C) indicates the presence of significant CaCl 2 and possibly MgCl 2 together with NaCl. Calculated fluid δ 18 O for pre-fluorite quartz ranges from -9.1per thousand to -5.2per thousand, with δD between -55per thousand to -64per thousand, placing the data directly on the present day meteoric water line. Fluorite stage fluids have δ 18 O between +0.1per thousand to +3.2per thousand, and δD ranging from -53per thousand to -75per thousand, indicating an interacted meteoric fluid origin. Combining the fluid inclusion and stable isotope data illustrates that the main fluorite depositing fluid has characteristics typical of a basinal brine. The authors have no evidence that a magmatic system was involved in the deposit genesis. The proposed model highlights that mineralisation was related to major Mesozoic extensional events coinciding with the gradual opening of the Atlantic and Tethys oceans. In order to account for the chemistry of the fluids, and the siting of the deposits, the authors postulate a genetic relationship with local, continental, evaporite-bearing basins coincident with, and controlled by the E-W fractures. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Can Inclusions Survive To The Ends Of The Earth?

Science.gov (United States)

Taylor, R.

2017-12-01

Many petrological, geochemical, and paleomagnetic studies are now focussing on the inclusions that are hosted within other minerals. This approach comes with the benefit that the inclusion can be protected or `armoured' from further external influences subsequent to its encapsulation within a host phase. An armoured inclusion may retain genuine primary information, rather than secondary information resulting from alteration by agents such as aqueous fluids. A key player in the role of the host mineral is zircon, being regarded as "ultrastable" with both physical and chemical resilience. Most importantly zircon is common in many rock types and is widely considered our primary U-­Pb geochronometer in ancient rocks. However this blessing is also its curse, U-decay can result in the accumulation of severe radiation damage over extreme lengths of time, potentially rendering the ultrastable host incapable of protecting its inclusions. Magnetic inclusions, such as magnetite, in zircon are pushing back the boundaries of our understanding of the Earth's magnetic field. The oldest zircon grains from Western Australia predate the most ancient rock record by c. 500 Myr, meaning that magnetic data from inclusions in such grains can push our paleomagnetic record into the Hadean. However few studies thus far have focussed on nature of the Fe-bearing inclusions in terms of their susceptibility to secondary alteration during their long history. Here we present 2D, 3D and isotopic data from inclusions and other internal features of the host zircon and investigate the characteristic features of primary vs secondary Fe-bearing material that may hold clues to early Earth history. Archean grains up to 3 Ga from NW Scotland are used as analogues for the rare Jack Hills material, and allow investigation of Fe alteration from source to sink. Inclusions and potential fluid infiltration networks are imaged in 3D by synchrotron x-ray micro computed tomography. These 3D images are compared to

Cu-Mo-Au mineralization in Qarachilar area, Qaradagh batholith (NW Iran): Fluid inclusion and stable isotope studies and Re-Os dating

Science.gov (United States)

Simmonds, Vartan; Moazzen, Mohssen

2015-04-01

The Qaradagh batholith is located in NW Iran, neighboring the Meghri-Ordubad granitoid in southern Armenia. This magmatic complex is emplaced in the northwestern part of the Urumieh-Dokhtar magmatic arc, which formed through north-eastward subduction of Neo-Tethyan oceanic crust beneath the central Iranian domain in the late-Mesozoic and early-Cenozoic and hosts most of the porphyry copper deposits and prospects in Iran, such as Sarcheshmeh and Sungun. The Qaradagh batholith is comprised of Eocene-Oligocene intrusive rocks occurring as multi-episode stocks, where the dominant rock type is granodiorite. Hydrothermal alterations have also occurred in these rocks including potassic, phyllic-sericitic, argillic and propylitic alterations and silicification. These alterations are accompanied by vein-type and disseminated Cu, Mo and Au mineralization. The Qarachilar area is located in the central part of the Qaradagh batholith, which hosts mono-mineralic and quartz-sulfide veins and veinlets (several mm to <1 m thick and 50-700 m long) and silicic zones containing Cu-Mo-Au-Ag ore minerals (mainly pyrite, chalcopyrite and molybdenite). Microthermometric studies on the fluid inclusions of quartz-sulfide veins-veinlets show that the salinity ranges between 15-70 wt% NaCl, with the highest peak between 35-40 wt% NaCl. The homogenization temperature for primary 2-phase and multi-phase inclusions ranges between 220 and 540 °C. Two-phase inclusions homogenizing by vapor disappearance have TH values between 280 and 440 °C (mainly between 300 and 360 °C). A few of them homogenize into vapor state with TH values of 440-540 °C. Multi-phase inclusions show 3 types of homogenization. Most of them homogenize by simultaneous disappearance of vapor bubble and dissolution of halite daughter crystal, for which the TH value is 240-420 °C (mostly between 260 and 340 °C). Those homogenizing by halite dissolution show TH values about 220-360 °C and a few homogenizing by vapor

Fluid inclusion gas chemistry in east Tennessee Mississippi Valley-type districts: Evidence for immiscibility and implications for depositional mechanisms

Energy Technology Data Exchange (ETDEWEB)

Jones, H.D.; Kesler, S.E. (Univ. of Michigan, Ann Arbor (United States))

1992-01-01

Analyses of fluid inclusion gases from Mississippi Valley-type districts in east Tennessee reveal the presence of several distinct aqueous solutions and vapors that were part of the mineralizing process. Inclusion contents were released by crushing 5 to 25 mg mineral samples and by decrepitating individual inclusions; all analyses were obtained by quadrupole mass spectrometry. Most analyzed inclusion fluids consist of H{sub 2}O with significant amounts of CH{sub 4} (0.3 to 2.9 mol%), CO{sub 2} (0.1 to 4.7 mol%), and smaller amounts of C{sub 2}H{sub 6}, C{sub 3}H{sub 8}, H{sub 2}S, SO{sub 2}, N{sub 2}, and Ar. Compositional similarities in the inclusion fluids from three districts imply that mineralization probably formed from fluids that permeated the entire region. Saturation pressures calculated for these fluid compositions range from 300 to 2,200 bars. Burial depths for the host unit have been estimated to be about 2 to 3 km during Devonian time, the age of mineralization indicated by recent isotopic ages. Exsolution of a vapor phase from the mineralizing brines should cause precipitation of carbonate and sulfide minerals, but reaction path modeling indicates that the resulting sparry dolomite:sphalerite ratios would be too high to form an ore-grade deposit. If the vapor phase was from a preexisting sour gas cap that was intercepted by a Zn-rich brine, large amounts of spalerite would precipitate in a fairly small region. Preliminary mass balance calculations suggest that a gas cap of dimensions similar to the individual districts in east Tennessee could have contained enough H{sub 2}S to account for the total amount of sphalerite precipitated.

New on-line method for water isotope analysis of speleothem fluid inclusions using laser absorption spectroscopy (WS-CRDS)

Science.gov (United States)

Affolter, S.; Fleitmann, D.; Leuenberger, M.

2014-01-01

A new online method to analyse water isotopes of speleothem fluid inclusions using a wavelength scanned cavity ring down spectroscopy (WS-CRDS) instrument is presented. This novel technique allows us to simultaneously measure hydrogen and oxygen isotopes for a released aliquot of water. To do so, we designed a new simple line that allows the on-line water extraction and isotope analysis of speleothem samples. The specificity of the method lies in the fact that fluid inclusions release is made on a standard water background, which mainly improves the δD reliability. To saturate the line, a peristaltic pump continuously injects standard water into the line that is permanently heated to 140 °C and flushed with dry nitrogen gas. This permits instantaneous and complete vaporisation of the standard water resulting in an artificial water background with well-known δD and δ18O values. The speleothem sample is placed into a copper tube, attached to the line and after system stabilisation is crushed using a simple hydraulic device to liberate speleothem fluid inclusions water. The released water is carried by the nitrogen/standard water gas stream directly to a Picarro L1102-i for isotope determination. To test the accuracy and reproducibility of the line and to measure standard water during speleothem measurements a syringe injection unit was added to the line. Peak evaluation is done similarly as in gas chromatography to obtain δD and δ18O isotopic composition of measured water aliquots. Precision is better than 1.5‰ for δD and 0.4‰ for δ18O for water measurement for an extended range (-210 to 0‰ for δD and -27 to 0‰ for δ18O) primarily dependent on the amount of water released from speleothem fluid inclusions and secondarily on the isotopic composition of the sample. The results show that WS-CRDS technology is suitable for speleothem fluid inclusion measurements and gives results that are comparable to Isotope Ratio Mass Spectrometry (IRMS) technique.

Stable isotope and fluid inclusion signatures of hydrothermal fluids in transcrustal fault zones: significance for orogenic, Archean lode-gold mineralization

International Nuclear Information System (INIS)

Neumayr, P.; Hagemann, S.G.; Groves, D.I.

1999-01-01

mil). Calculated d 18 O fluid compositions for quartz in the CTZ range from 8.0 to 10.3 per mil at 350 deg C (based on arsenopyrite and chlorite thermometry). Hydrogen isotopes from fluid inclusion waters trapped in quartz have a large variation from -62.5 per mil to -7.2 per mil in the CTZ fluids, whereas hydrogen in fluid inclusions in quartz in the second- and third-order shear zones shows a restricted range from -67.6 to -39.8 per mil. The oxygen isotope shift of about 2 per mil from the CTZ to the second- and third-order fault zones may be explained by two competing processes: 1) the hydrothermal fluids in the CTZ equilibrated, at least partially, with metasedimentary rocks in the footwall, and or 2) there was fractionation of oxygen isotopes during phase immiscibility of a combined H 2 O-CO 2 fluid. The preferential trapping of CO 2 -rich fluids in the CTZ, and H 2 O-rich fluids in the second- and third-order fault zones, therefore, could account for the shift in d 18 O. At present, the first process is preferred, because of the ubiquitous presence of the metasedimentary rocks in the footwall and the consistent d 18 O composition of the CTZ, even in hydrothermal quartz veins which contain significant H 2 O. The large variation in the hydrogen isotopes in fluid inclusions in quartz in the CTZ may be explained by late Archean and post-Archean reactivation of the CTZ and the introduction of fluids related to late-fractures fills, whereas apparently minor reactivation of the second- and third-order structures resulted in a restricted range of dD. Copyright (1999) Geological Society of Australia

Salinity of the Archaean oceans from analysis of fluid inclusions in quartz

Science.gov (United States)

Marty, Bernard; Avice, Guillaume; Bekaert, David V.; Broadley, Michael W.

2018-05-01

Fluids trapped in inclusions in well-characterized Archaean hydrothermal quartz crystals were analyzed by the extended argon-argon method, which permits the simultaneous measurement of chlorine and potassium concentrations. Argon and nitrogen isotopic compositions of the trapped fluids were also determined by static mass spectrometry. Fluids were extracted by stepwise crushing of quartz samples from North Pole (NW Australia) and Barberton (South Africa) 3.5-3.0-Ga-old greenstone belts. The data indicate that fluids are a mixture of a low salinity end-member, regarded as the Archaean oceanic water, and several hydrothermal end-members rich in Cl, K, N, and radiogenic parentless 40Ar. The low Cl-K end-member suggests that the salinity of the Archaean oceans was comparable to the modern one, and that the potassium content of the Archaean oceans was lower than at present by about 40%. A constant salinity of the oceans through time has important implications for the stabilization of the continental crust and for the habitability of the ancient Earth.

Factors Associated with Primary School Teachers' Attitudes Towards the Inclusion of Students with Disabilities.

Science.gov (United States)

Vaz, Sharmila; Wilson, Nathan; Falkmer, Marita; Sim, Angela; Scott, Melissa; Cordier, Reinie; Falkmer, Torbjörn

2015-01-01

Teachers' attitudes toward inclusion are often based on the practical implementation of inclusive education rather than a specific ideology and understanding of inclusiveness. This study aimed to identify the factors associated with primary school teachers' attitudes towards inclusion of students with all disabilities in regular schools. Seventy four primary school teachers participated in a cross-sectional survey conducted in Western Australia. Teachers' attitudes and efficacy toward integration of students with disabilities were measured using the Opinions Relative to Integration of Students with Disabilities scale and Bandura's Teacher Efficacy scale respectively. Four teacher attributes-age, gender, teaching self-efficacy and training collectively explained 42% of the variability in teachers' attitude toward including students with disabilities. The current study further contributes to the accumulation of knowledge that can unpack the complex pattern of factors that should be considered to promote positive attitudes towards inclusive schools.

The La Unión Au ± Cu prospect, Camagüey District, Cuba: fluid inclusion and stable isotope evidence for ore-forming processes

Science.gov (United States)

Santana, Miriela María Ulloa; Moura, Márcia Abrahão; Olivo, Gema R.; Botelho, Nilson Francisquini; Kyser, T. Kurtis; Bühn, Bernhard

2011-01-01

The Camagüey district, Cuba, is known for its epithermal precious metal deposits in a Cretaceous volcanic arc setting. Recently, the La Unión prospect was discovered in the southern part of the district, containing gold and minor copper mineralization interpreted as porphyry type. Mineralization is hosted in a 73.0 ± 1.5 Ma calc-alkaline I-type oxidized porphyry quartz diorite intrusive within volcanic and volcaniclastic rocks of the early Cretaceous Guáimaro Formation. The porphyry is affected by propylitic alteration and crosscut by a network of quartz and carbonate veinlets and veins. Chlorite, epidote, sericite, quartz, and pyrite are the main minerals in the early veins which are cut by late carbonate and zeolite veins. Late barite pseudomorphously replaces pyrite. Gold is associated with pyrite as disseminations in the altered quartz diorite and in the veins, occurring as inclusions or filling fractures in pyrite with 4 g/t Au in bulk samples, and up to 900 ppm Au in in pyrite. Fluid inclusion and oxygen isotope data are consistent with a H2O-NaCl-(KCl) mineralizing fluid, derived from the quartz diorite magma, and trapped at least at 425°C and 1.2 kbar. This primary fluid unmixed into two fluid phases, a hypersaline aqueous fluid and a low-salinity vapor-rich fluid. Boiling during cooling may have played an important role in metal precipitation. Pyrite δ34S values for the La Unión prospect range between 0.71‰ and 1.31‰, consistent with a homogeneous magmatic sulfur source. The fluids in equilibrium with the mineralized rocks have estimated δ18O values from 8‰ to 11.8‰, calculated for a temperature range of 480-505°C. The tectonic environment of the La Unión prospect, its high gold and low copper contents, the physical-chemical characteristics of the mineralizing fluids and the isotopic signature of the alteration minerals and fluids indicate that the La Unión gold mineralization is similar to the porphyry gold type, even though the ore

Dating quartz: Ar/Ar analyses of coexisting muscovite and fluid inclusion - rich quartz from paleocene amorphic aureole

International Nuclear Information System (INIS)

Matthews, S.J.; Perez de Arce, C.; Cornejo, P.; Cuitino, L; Klein, J

2001-01-01

We present Ar/Ar total fusion and step-heating data for coexisting muscovite and white quartz from the metamorphic aureole of the Lower Paleocene La Copiapina Pluton, 6 km south of Inca de Oro, III Region, Chile. The pluton intrudes the upper clastic sedimentary member of the Punta del Cobre Group (Upper Jurassic - Lower Cretaceous) and the calcareous sedimentary rocks of the Chanarcillo Group (Neocomian), and comprises fine to coarse grained pyroxene-hornblende-biotite quartz diorites and monzodiorites. Its emplacement was controlled on its north-western side by a subvertical NE-trending fault, along which were developed vertically banded skarns (skarn mylonite), suggesting syntectonic intrusion. Biotite K-Ar ages for the pluton fall in the range 61-63 Ma, relating it to a latest Cretaceous to Lowest Paleocene syn-compressional intrusive belt which is present in the area (Matthews and Cornejo, 2000). A metamorphic / metasomatic aureole is developed within the sandstones of the Punta del Cobre Group, on the extreme northern limit of the pluton. In this area, the sedimentary rocks have been replaced by quartz-sericite and quartz-muscovite assemblages, with minor hematite and tourmaline, and late supergene kaolinite and pyrophyllite. A coarse muscovite-quartz-tourmaline-hematite assemblage is developed in and around older (early Upper Cretaceous) andesitic dykes, in the form of replacement / fracture fill veins and replacement zones. Further from the contact with the pluton, fine-grained quartz-sericite rock with coarser muscovite-rich replacement veins represents the dominant lithology. Quartz in the coarse replacement rock is very rich in fluid inclusions. Primary inclusions are mainly of two coexisting types; bi-phase (liquid and gas bubble) and tri-phase (liquid, gas bubble and halite crystal), indicating that the quartz formed in the presence of a boiling fluid. Some inclusions also contain sylvite and occasional hematite daughter crystals. Secondary inclusions

Factors Associated with Primary School Teachers’ Attitudes Towards the Inclusion of Students with Disabilities

Science.gov (United States)

Vaz, Sharmila; Wilson, Nathan; Falkmer, Marita; Sim, Angela; Scott, Melissa; Cordier, Reinie; Falkmer, Torbjörn

2015-01-01

Objective Teachers' attitudes toward inclusion are often based on the practical implementation of inclusive education rather than a specific ideology and understanding of inclusiveness. This study aimed to identify the factors associated with primary school teachers' attitudes towards inclusion of students with all disabilities in regular schools. Method Seventy four primary school teachers participated in a cross-sectional survey conducted in Western Australia. Teachers' attitudes and efficacy toward integration of students with disabilities were measured using the Opinions Relative to Integration of Students with Disabilities scale and Bandura's Teacher Efficacy scale respectively. Results Four teacher attributes—age, gender, teaching self-efficacy and training collectively explained 42% of the variability in teachers' attitude toward including students with disabilities. Conclusion The current study further contributes to the accumulation of knowledge that can unpack the complex pattern of factors that should be considered to promote positive attitudes towards inclusive schools. PMID:26317862

Factors Associated with Primary School Teachers' Attitudes Towards the Inclusion of Students with Disabilities.

Directory of Open Access Journals (Sweden)

Sharmila Vaz

Full Text Available Teachers' attitudes toward inclusion are often based on the practical implementation of inclusive education rather than a specific ideology and understanding of inclusiveness. This study aimed to identify the factors associated with primary school teachers' attitudes towards inclusion of students with all disabilities in regular schools.Seventy four primary school teachers participated in a cross-sectional survey conducted in Western Australia. Teachers' attitudes and efficacy toward integration of students with disabilities were measured using the Opinions Relative to Integration of Students with Disabilities scale and Bandura's Teacher Efficacy scale respectively.Four teacher attributes-age, gender, teaching self-efficacy and training collectively explained 42% of the variability in teachers' attitude toward including students with disabilities.The current study further contributes to the accumulation of knowledge that can unpack the complex pattern of factors that should be considered to promote positive attitudes towards inclusive schools.

Preliminary studies on fluid inclusions in metasomatic albite grains from Lagoa Real, Caetite, Ba, Brazil

International Nuclear Information System (INIS)

Fuzikawa, K.

1980-01-01

Preliminary fluid inclusion studies in metasomatic albite grains from the Lagoa Real uranium deposit pointed out to mixing of strong brines (23 wt% NaCl equivalent) with low salinity fluids (2.3 wt% NaCl equivalent). Microthermometry and crushing tests indicated elevated pressures and the presence of hidrocarbons in larger amount than CO 2 . The remobilization of uranium as uranyl carbonate complexes and its precipitation, reducing U 6 + to U 4 + by CH 4 , is considered as a possibility. (Author) [pt

Oscillatory fluid flow influences primary cilia and microtubule mechanics.

Science.gov (United States)

Espinha, Lina C; Hoey, David A; Fernandes, Paulo R; Rodrigues, Hélder C; Jacobs, Christopher R

2014-07-01

Many tissues are sensitive to mechanical stimuli; however, the mechanotransduction mechanism used by cells remains unknown in many cases. The primary cilium is a solitary, immotile microtubule-based extension present on nearly every mammalian cell which extends from the basal body. The cilium is a mechanosensitive organelle and has been shown to transduce fluid flow-induced shear stress in tissues, such as the kidney and bone. The majority of microtubules assemble from the mother centriole (basal body), contributing significantly to the anchoring of the primary cilium. Several studies have attempted to quantify the number of microtubules emanating from the basal body and the results vary depending on the cell type. It has also been shown that cellular response to shear stress depends on microtubular integrity. This study hypothesizes that changing the microtubule attachment of primary cilia in response to a mechanical stimulus could change primary cilia mechanics and, possibly, mechanosensitivity. Oscillatory fluid flow was applied to two different cell types and the microtubule attachment to the ciliary base was quantified. For the first time, an increase in microtubules around primary cilia both with time and shear rate in response to oscillatory fluid flow stimulation was demonstrated. Moreover, it is presented that the primary cilium is required for this loading-induced cellular response. This study has demonstrated a new role for the cilium in regulating alterations in the cytoplasmic microtubule network in response to mechanical stimulation, and therefore provides a new insight into how cilia may regulate its mechanics and thus the cells mechanosensitivity. Copyright © 2014 Wiley Periodicals, Inc.

Temporal and spatial distribution of alteration, mineralization and fluid inclusions in the transitional high-sulfidation epithermal-porphyry copper system at Red Mountain, Arizona

Science.gov (United States)

Lecumberri-Sanchez, Pilar; Newton, M. Claiborne; Westman, Erik C.; Kamilli, Robert J.; Canby, Vertrees M.; Bodnar, Robert J.

2013-01-01

Red Mountain, Arizona, is a Laramide porphyry Cu system (PCD) that has experienced only a modest level of erosion compared to most other similar deposits in the southwestern United States. As a result, the upper portion of the magmatic–hydrothermal system, which represents the transition from shallower high-sulfidation epithermal mineralization to deeper porphyry Cu mineralization, is well preserved. Within the Red Mountain system, alteration, mineralization and fluid inclusion assemblages show a systematic distribution in both time and space. Early-potassic alteration (characterized by the minerals biotite and magnetite) is paragenetically earlier than late-potassic alteration (K-feldspar–anhydrite) and both are followed by later phyllic (sericite–pyrite) alteration. Advanced argillic alteration (pyrophyllite–alunite–other clay minerals) is thought to be coeval with or postdate phyllic alteration. Minerals characteristic of advanced argillic alteration are present in the near surface. Phyllic alteration extends to greater depths compared to advanced argillic alteration. Early-potassic and late-potassic alteration are only observed in the deepest part of the system. Considerable overlap of phyllic alteration with both early-potassic and late-potassic alteration zones is observed. The hypogene mineralization contains 0.4–1.2% Cu and is spatially and temporally related to the late-potassic alteration event. Molybdenum concentration is typically In the deepest part of the system, an early generation of low-to-moderate density and salinity liquid + vapor inclusions with opaque daughter minerals is followed in time by halite-bearing inclusions that also contain opaque daughter minerals indicating that an early intermediate-density magmatic fluid evolved to a high-density, high-salinity mineralizing fluid. The increase in density and salinity of fluids with time observed in the deeper parts of the system may be the result of immiscibility (“boiling”) of

Organic compounds in fluid inclusions of Archean quartz-Analogues of prebiotic chemistry on early Earth.

Science.gov (United States)

Schreiber, Ulrich; Mayer, Christian; Schmitz, Oliver J; Rosendahl, Pia; Bronja, Amela; Greule, Markus; Keppler, Frank; Mulder, Ines; Sattler, Tobias; Schöler, Heinz F

2017-01-01

The origin of life is still an unsolved mystery in science. Hypothetically, prebiotic chemistry and the formation of protocells may have evolved in the hydrothermal environment of tectonic fault zones in the upper continental crust, an environment where sensitive molecules are protected against degradation induced e.g. by UV radiation. The composition of fluid inclusions in minerals such as quartz crystals which have grown in this environment during the Archean period might provide important information about the first organic molecules formed by hydrothermal synthesis. Here we present evidence for organic compounds which were preserved in fluid inclusions of Archean quartz minerals from Western Australia. We found a variety of organic compounds such as alkanes, halocarbons, alcohols and aldehydes which unambiguously show that simple and even more complex prebiotic organic molecules have been formed by hydrothermal processes. Stable-isotope analysis confirms that the methane found in the inclusions has most likely been formed from abiotic sources by hydrothermal chemistry. Obviously, the liquid phase in the continental Archean crust provided an interesting choice of functional organic molecules. We conclude that organic substances such as these could have made an important contribution to prebiotic chemistry which might eventually have led to the formation of living cells.

Primary School Teachers' Knowledge, Attitudes and Views on Barriers to Inclusion in Jordan

Science.gov (United States)

Amr, Muna; Al-Natour, Mayada; Al-Abdallat, Bassam; Alkhamra, Hatem

2016-01-01

This study explores teachers' knowledge and attitudes toward the inclusion of students with special education needs (SEN) in mainstream schools in Jordan. It also examines the barriers the teachers perceived to hinder successful inclusions. The study sample consisted of 87 primary school teachers who responded to an open-ended questionnaire asking…

An empirical study on primary school teachers’ attitudes towards inclusive education in Jakarta, Indonesia

NARCIS (Netherlands)

Kurniawati, Farida; Minnaert, A.E.M.G.; Mangunsong, F.; Ahmed, W.

2012-01-01

Empirical research revealed that teachers’ attitudes play a crucial role in successful implementation of inclusive education. This study aimed to examine primary school teachers’ attitudes towards inclusive education in Jakarta, Indonesia. Respondents completed the attitude scale which comprised the

Leadership practices and inclusive education reform in primary schools in Bangladesh

OpenAIRE

Mullick, Jahirul

2017-01-01

This study was undertaken to investigate leadership practices for Inclusive Education (IE) reform in primary schools in Bangladesh. Specifically, the study investigated leadership practice structures, views of school leaders about the accountability approach in primary schools, school leaders’ opinions on challenges to implementing IE and possible strategies to address the identified challenges. The study also explored the relationships between school variables, teachers’ demographic variabl...

Major element compositions of fluid inclusions from hydrothermal vein-type deposits record eroded sedimentary units in the Schwarzwald district, SW Germany

Science.gov (United States)

Walter, Benjamin F.; Burisch, Mathias; Marks, Michael A. W.; Markl, Gregor

2017-12-01

Mixing of sedimentary formation fluids with basement-derived brines is an important mechanism for the formation of hydrothermal veins. We focus on the sources of the sediment-derived fluid component in ore-forming processes and present a comprehensive fluid inclusion study on 84 Jurassic hydrothermal veins from the Schwarzwald mining district (SW Germany). Our data derive from about 2300 fluid inclusions and reveal differences in the average fluid composition between the northern, central, and southern Schwarzwald. Fluids from the northern and southern Schwarzwald are characterised by high salinities (18-26 wt% NaCl+CaCl2), low Ca/(Ca+Na) mole ratios (0.1-0.4), and variable Cl/Br mass ratios (30-1140). In contrast, fluids from the central Schwarzwald show even higher salinities (23-27 wt% NaCl+CaCl2), higher Ca/(Ca+Na) mole ratios (0.2-0.9), and less variable Cl/Br mass ratios (40-130). These fluid compositions correlate with the nature and thickness of the now eroded sedimentary cover rocks. Compared to the northern and the southern Schwarzwald, where halite precipitation occurred during the Middle Triassic, the sedimentary basin in the central Schwarzwald was relatively shallow at this time and no halite was precipitated. Accordingly, Cl/Br ratios of fluids from the central Schwarzwald provide no evidence for the reaction of a sedimentary brine with halite, whereas those from the northern and southern Schwarzwald do. Instead, elevated Ca/(Ca+Na), high SO4 contents, and relatively low Cl/Br imply the presence of a gypsum dissolution brine during vein formation in the central Schwarzwald which agrees with the reconstructed regional Triassic geology. Hence, the information archived in fluid inclusions from hydrothermal veins in the crystalline basement has the potential for reconstructing sedimentary rocks in the former overburden.

Some carbonates from Lagoa Real uranium province, State of Bahia: studies on fluid inclusion and stable isotope

International Nuclear Information System (INIS)

Fuzikawa, K.

1982-01-01

The geochemical conditions of the uraniferous carbonates of Lagoa Real province were studied using the fluid inclusions method and the isotopic determinations of the carbon and oxygen of these carbonates. (A.B.) [pt

Stable isotope and fluid inclusion evidence for the origin of the Brandberg West area Sn-W vein deposits, NW Namibia

Science.gov (United States)

Macey, Paul; Harris, Chris

2006-10-01

The Brandberg West region of NW Namibia is dominated by poly-deformed turbidites and carbonate rocks of the Neoproterozoic Damara Supergoup, which have been regionally metamorphosed to greenschist facies and thermally metamorphosed up to mid-amphibolite facies by Neoproterozoic granite plutons. The meta-sedimentary rocks host Damaran-age hydrothermal quartz vein-hosted Sn-W mineralization at Brandberg West and numerous nearby smaller deposits. Fluid inclusion microthermometric studies of the vein quartz suggests that the ore-forming fluids at the Brandberg West mine were CO2-bearing aqueous fluids represented by the NaCl-CaCl2-H2O-CO2 system with moderate salinity (mean=8.6 wt% NaClequivalent).Temperatures determined using oxygen isotope thermometry are 415-521°C (quartz-muscovite), 392-447°C (quartz-cassiterite), and 444-490°C (quartz-hematite). At Brandberg West, the oxygen isotope ratios of quartz veins and siliciclastic host rocks in the mineralized area are lower than those in the rocks and veins of the surrounding areas suggesting that pervasive fluid-rock interaction occurred during mineralization. The O- and H-isotope data of quartz-muscovite veins and fluid inclusions indicate that the ore fluids were dominantly of magmatic origin, implying that mineralization occurred above a shallow granite pluton. Simple mass balance calculations suggest water/rock ratios of 1.88 (closed system) and 1.01 (open system). The CO2 component of the fluid inclusions had similar δ 13C to the carbonate rocks intercalated with the turbidites. It is most likely that mineralization at Brandberg West was caused by a combination of an impermeable marble barrier and interaction of the fluids with the marble. The minor deposits in the area have quartz veins with higher δ 18O values, which is consistent with these deposits being similar geological environments exposed at higher erosion levels.

Fluid inclusions of the Horní Slavkov Sn-W ore deposit, Bohemian Massif, Czech Republic: evidence for non-magmatic source of greisenizing fluids?

Czech Academy of Sciences Publication Activity Database

Dolníček, Z.; René, Miloš; Prochaska, W.

2011-01-01

Roč. 87, - (2011), s. 68-69 ISSN 1017-8880. [Ecrofi XXI. 09.08.2011-11.08.2011, Leoben] R&D Projects: GA ČR GA205/09/0540 Institutional research plan: CEZ:AV0Z30460519 Keywords : fluid inclusion * greisen * tin ore Subject RIV: DB - Geology ; Mineralogy

Ice-VII inclusions in diamonds: Evidence for aqueous fluid in Earth’s deep mantle

Science.gov (United States)

Tschauner, O.; Huang, S.; Greenberg, E.; Prakapenka, V. B.; Ma, C.; Rossman, G. R.; Shen, A. H.; Zhang, D.; Newville, M.; Lanzirotti, A.; Tait, K.

2018-03-01

Water-rich regions in Earth’s deeper mantle are suspected to play a key role in the global water budget and the mobility of heat-generating elements. We show that ice-VII occurs as inclusions in natural diamond and serves as an indicator for such water-rich regions. Ice-VII, the residue of aqueous fluid present during growth of diamond, crystallizes upon ascent of the host diamonds but remains at pressures as high as 24 gigapascals; it is now recognized as a mineral by the International Mineralogical Association. In particular, ice-VII in diamonds points toward fluid-rich locations in the upper transition zone and around the 660-kilometer boundary.

Inclusive Education Policy in the Hong Kong Primary Music Classroom

Science.gov (United States)

Wong, Marina Wai-yee; Chik, Maria Pik-yuk

2016-01-01

An education reform policy and inclusive education policy have been implemented in Hong Kong for over a decade. As more students with special educational needs have entered the mainstream education system under these policies, Hong Kong's primary music classrooms offer a site where three policies interact--the education reform policy entitled…

An empirical study on primary school teachers’ attitudes towards inclusive education in Jakarta, Indonesia

OpenAIRE

Kurniawati, Farida; Minnaert, A.E.M.G.; Mangunsong, F.; Ahmed, W.

2012-01-01

Empirical research revealed that teachers’ attitudes play a crucial role in successful implementation of inclusive education. This study aimed to examine primary school teachers’ attitudes towards inclusive education in Jakarta, Indonesia. Respondents completed the attitude scale which comprised the theory-driven cognitive, affective and behavioral components of attitude. The findings show that teachers are in favor of inclusion and their attitudes seem to be related to their teaching experie...

The origin of the Tongkeng-Changpo tin deposit, Dachang metal district, Guangxi, China: clues from fluid inclusions and He isotope systematics

Science.gov (United States)

Minghai, Cai; Jingwen, Mao; Ting, Liang; Pirajno, Franco; Huilan, Huang

2007-08-01

Tongkeng-Changpo is the largest tin deposit within the giant Dachang polymetallic tin ore field in Guangxi, southern China, which is part of a large skarn system associated with Cretaceous granitoids. The Tongkeng-Changpo mineralization consists of veins and stockworks in the upper levels and replacement stratiform orebodies (mantos) at lower levels. Based on textural relationships, three major mineralizing stages can be recognized: stage I with cassiterite, sulphides, stannite, tourmaline, and quartz; stage II with cassiterite, sulphides, sulphosalts, quartz, and calcite; and stage III with calcite as the main phase. The study of fluid inclusions has shown that there are two main fluid types: CO2 and NaCl-H2O. Homogenization temperatures are 270 to 365°C, 210 to 240°C, and 140 to 190°C for stages I, II, and III, respectively. Salinities range from 1 to 7 wt.% NaCl equiv. in the early ore stage and 3 to 10 wt.% NaCl equiv. in the late stages. Laser Raman Spectroscopy indicates that the inclusion fluids in stages I and II were of carbono-aqueous composition, with minor amounts of CH4 and H2S, whereas those in stage III were aqueous. Helium isotopic analyses of inclusion fluids indicate that the 3He/4He ratios in the ore veins are in between 1.2 to 2.9 Ra (Ra = 1.4 × 10-6, modern atmospheric ratio), and range from 1.6 to 2.5 Ra in the stratiform orebodies. This range of 3He/4He ratios is significantly higher than that of crustal fluids (0.01-0.05 Ra). The similar characteristics of fluid inclusions and their He isotopic composition, as well as age constraints, indicate that the ore veins and stratiform orebodies of the Tongkeng-Changpo deposit formed from the same hydrothermal system, likely related to granite intrusions of the Mesozoic Yanshanian tectono-thermal event. In addition, the high R/Ra ratios indicate a mantle contribution in the ore fluids.

Learned Helplessness in Inclusive Music Classrooms: Voices of Hong Kong Primary Schools Music Teachers

Science.gov (United States)

Wong, Marina Wai-yee; Chik, Maria Pik-yuk

2015-01-01

In Hong Kong, inclusive education is concerned with educating all students, including those who are categorised as having special educational needs (SEN). This qualitative study reports three challenges faced by primary schools music teachers required to implement inclusive education. The first two challenges echo those reported…

Immiscibility of Fluid Phases at Magmatic-hydrothermal Transition: Formation of Various PGE-sulfide Mineralization for Layered Basic Intrusions

Science.gov (United States)

Zhitova, L.; Borisenko, A.; Morgunov, K.; Zhukova, I.

2007-12-01

Fluid inclusions in quartz of the Merensky Reef (Bushveld Complex, South Africa) and the Chineisky Pluton (Transbaikal Region, Russia) were studied using cryometry, microthermometry, Raman-spectroscopy, LA ICP- MS, scanning electronic microscopy, gas-chromatography and isotopic methods. This allowed us to document some examples of fluid phase separation resulting in formation of different types of PGE-sulfide mineralization for layered basic intrusions. The results obtained show at least three generations of fluid separated from boiling residual alumosilicate intercumulus liquid of the Merensky Reef. The earliest fluid phase composed of homogenous high-dense methane and nitrogen gas mixture was identified in primary gas and co-existing anomalous fluid inclusions from symplectitic quartz. The next generation, heterophase fluid, composed of brines containing a free low-dense (mostly of carbon dioxide) gas phase, was observed in primary multiphase and coexisting gas-rich inclusions of miarolitic quartz crystals. The latest generation was also a heterophase fluid (low salinity water-salt solution and free low-dense methane gas phase) found in primary water-salt and syngenetic gas inclusions from peripheral zones of miarolitic quartz crystals. For the Chineisky Pluton reduced endocontact magmatogene fluids changed to oxidized low salinity hydrothermal fluids in exocontact zone. This resulted in formation of sulfide-PGE enrichment marginal zones of intrusion. The results obtained give us a possibility to suggest that: 1) Fluid phase separation is a typical feature of magmatogene fluids for layered basic intrusions. 2) Reduced fluids can extract and transport substantial PGE and sulfide concentrations. 3) Oxidation of reduced fluids is one of the most important geochemical barriers causing abundant PGE minerals and sulfides precipitation. This in turn results in both formation of PGE reefs or enriched contact zones of layered basic intrusions. This work was supported by

Na-Cl-Br systematics of fluid inclusions from Mississippi Valley-type deposits, Appalachian Basin: Constraints on solute origin and migration paths

Energy Technology Data Exchange (ETDEWEB)

Kesler, S.E.; Martini, A.M.; Appold, M.S.; Walter, L.M.; Huston, T.J. [Univ. of Michigan, Ann Arbor, MI (United States); Furman, F.C. [Univ. of Missouri, Rolla, MO (United States)

1996-01-01

This study evaluated Na-Cl-Br systematics of fluid inclusion-hosted brines in Mississippi Valley-type (MVT) deposits from the Appalachian Basin. Unlike other geochemical tracers such as lead and strontium isotopes which constrain metal sources, Na-Cl-Br systematics identify sources of brine salinity. Saline formation waters can vary systematically within and between basins with regard to their Na-Cl-Br compositions depending on the importance of halite dissolution relative to retention of subaerially evaporated seawater for the halogen budget. Oil field brine compositions from the Illinois and Appalachian basins are quite distinct in their Na-Cl-Br systematics. Compositions of saline fluid inclusions in MVT deposits generally are consistent with these regional differences. These results shed new light on the extent of regional flow systems and on the geochemical evolution of saline fluids responsible for mineralization. Nearly all fluid inclusions analyzed from the Appalachian MVT deposits have Na/Br and Cl/Br ratios less than modern seawater, consistent with ratios observed in marine brines involved in halite precipitation. The Na-Cl-Br systematics of the brines responsible for Appalachian MVT deposits may be inherited from original marine brines refluxed into the porous carbonate shelf sediments that host these deposits. The Cl/Br and Na/Br ratios of most fluid inclusion-hosted brines from Appalachian MVT sphalerites and fluorites fall into two compositional groups, one from the Lower Cambrian paleoaquifer and another from the Lower Ordovician paleoaquifer. Leachates from most MVT barite deposits form a third compositional group having lower Na/Br and Cl/Br ratios than the other two. Appalachian MVT leachate compositions differ significantly from those in MVT deposits in the Cincinnati arch-midcontinent region suggesting that these two MVT provinces formed from brines of different origin or flow path. 59 refs., 8 figs., 2 tabs.

Factors Influencing Belize District Primary School Teachers' Attitudes toward Inclusive Education

Science.gov (United States)

McKay, Maxine

2012-01-01

Inclusive education continues to be a reoccurring challenge as various factors affect to what extent teachers or educators are willing to educate children with disabilities in the regular education setting alongside their non-disabled peers. This quantitative study examined factors influencing Belize District Primary School teachers' attitudes…

Parent Involvement in Inclusive Primary Schools in New Zealand: Implications for Improving Practice and for Teacher Education

Science.gov (United States)

Hornby, Garry; Witte, Chrystal

2010-01-01

A critical factor in the success of inclusive schools is effective parent involvement in the education of children with special educational needs. This article reports the results of a survey of the practice of parent involvement in inclusive primary schools in a large city in New Zealand. Interviews were conducted with 21 primary school…

Raman and micro-thermometric investigation of the fluid inclusions in quartz in a gold-rich formation from Lepaguare mining district (Honduras, Central America).

Science.gov (United States)

Bersani, D; Salvioli-Mariani, E; Mattioli, M; Menichetti, M; Lottici, P P

2009-08-01

Fluid inclusions in the quartz crystals present in gold-rich veins from central Honduras have been studied by means of micro-thermometry and micro-Raman spectroscopy in order to provide information on the physico-chemical conditions and chemical composition of the mineralizing fluids. The use of a confocal micro-Raman apparatus allowed to obtain information on the fluid composition, in particular on the gas phase, minimizing the contributions of the host matrix to the Raman signal. The samples studied were collected from an area (Lepaguare mining district, Northern-Central Honduras) rich in ore deposits due to the Cenozoic magmatic activity, where the gold and sulphide mineralization is connected with a system of quartz veins (few decimetres thick) occurring in low-grade metamorphic rocks and produced by hydrothermal fluids. The quartz crystals present in the gold-rich veins often contain fluid inclusions. Four types of fluid inclusions have been observed, but their assemblage in the same clusters and fracture systems, as well as their comparable salinity and homogenization data, suggest that they have the same origin. Micro-thermometry and Raman spectroscopy provide a composition of the mineralizing fluids attributable to the system H(2)O-NaCl-KCl-CO(2)-CH(4), with temperature and pressure intervals of 210-413 degrees C and 1050-3850 bar, respectively. These data agree with an epigenetic origin of the gold deposit (depth < 6 km) related to granitoid or granodiorite intrusions associated to orogenic environments.

Ore genesis constraints on the Idaho Cobalt Belt from fluid inclusion gas, noble gas isotope, and ion ratio analyses

Science.gov (United States)

Hofstra, Albert H.; Landis, Gary P.

2012-01-01

The Idaho cobalt belt is a 60-km-long alignment of deposits composed of cobaltite, Co pyrite, chalcopyrite, and gold with anomalous Nb, Y, Be, and rare-earth elements (REEs) in a quartz-biotite-tourmaline gangue hosted in Mesoproterozoic metasedimentary rocks of the Lemhi Group. It is the largest cobalt resource in the United States with historic production from the Blackbird Mine. All of the deposits were deformed and metamorphosed to upper greenschist-lower amphibolite grade in the Cretaceous. They occur near a 1377 Ma anorogenic bimodal plutonic complex. The enhanced solubility of Fe, Co, Cu, and Au as chloride complexes together with gangue biotite rich in Fe and Cl and gangue quartz containing hypersaline inclusions allows that hot saline fluids were involved. The isotopes of B in gangue tourmaline are suggestive of a marine source, whereas those of Pb in ore suggest a U ± Th-enriched source. The ore and gangue minerals in this belt may have trapped components in fluid inclusions that are distinct from those in post-ore minerals and metamorphic minerals. Such components can potentially be identified and distinguished by their relative abundances in contrasting samples. Therefore, we obtained samples of Co and Cu sulfides, gangue quartz, biotite, and tourmaline and post-ore quartz veins as well as Cretaceous metamorphic garnet and determined the gas, noble gas isotope, and ion ratios of fluid inclusion extracts by mass spectrometry and ion chromatography. The most abundant gases present in extracts from each sample type are biased toward the gas-rich population of inclusions trapped during maximum burial and metamorphism. All have CO2/CH4 and N2/Ar ratios of evolved crustal fluids, and many yield a range of H2-CH4-CO2-H2S equilibration temperatures consistent with the metamorphic grade. Cretaceous garnet and post-ore minerals have high RH and RS values suggestive of reduced sulfidic conditions. Most extracts have anomalous 4He produced by decay of U and Th and

Au-bearing magnetite mineralizaion in Kashmar (alteration, mineralization, geochemistry, geochemistry and fluid inclusions;

Directory of Open Access Journals (Sweden)

Alireza Almasi

2017-02-01

Full Text Available Introduction The study area is located in the central part of the Khaf- Kashmar- Bardaskan volcano-plotunic belt (briefly KKBB. Several IOCG deposits such as Tanourjeh Au-bearing magnetite deposit and Kuh-e-Zar Specularite-rich Au deposit have been explored in KKBB. Geology, alteration, mineralization, geochemistry and fluid inclusion results in Kashmar suggest the IOCG type Au-bearing magnetite mineralization. These IOCG deposits at KKBB form at an active continental arc related to SSZ-type Sabzevar oceanic subduction. Materials and methods Use of Landsat 7+, IRS and Aster satellites. Petrography and alteration Studies in 150 thin sections of volcanic and intrusive rocks. Sampling of ore-bearing quartz vein and mineralography. Preparation of 28 geochemistry samples by the chip composite method of ore-bearing quartz vein and analyzing them in the ACME laboratory by Aqua Regia 1DX1. Fluid inclusions studies of 14 samples of quartz and barite related to the ore minerals of ore-bearing quartz vein by THM600 stage of Linkam company. Results Magmatic events in Kashmar occur at Paleocene-Eocene and include: (1 old mafic - intermediate volcano-plutonic series; (2 felsic volcanic and granitoids; and (3 parallel swarm dykes which are youngest (Almasi et al., 2016. Geochemically, Kashmar rocks are metaluminous to highly peraluminous and Tholeitic to calc-alkaline and shoshonitic in composition (Almasi et al., 2016. The field characteristics, together with isotope and geochemical analyses show that all rock types are essentially co-magmatic and post-collisional I-type (Almasi et al., 2016. Alteration of Kashmar is described in two ways: (1 intense ellipsoidal-linear Argillic-Sillicification and low sericitic with Silica caps and with medium widespread and propylitic alterations in triple regions, next to Dorouneh fault; and (2 Medium Hematite-Carbonate-Chlorite-Silicification alterations in Kamarmard heights. In parts of near the Doruneh fault, sometimes

A salt diapir-related Mississippi Valley-type deposit: the Bou Jaber Pb-Zn-Ba-F deposit, Tunisia: fluid inclusion and isotope study

Science.gov (United States)

Bouhlel, Salah; Leach, David L.; Johnson, Craig A.; Marsh, Erin; Salmi-Laouar, Sihem; Banks, David A.

2016-08-01

The Bou Jaber Ba-F-Pb-Zn deposit is located at the edge of the Bou Jaber Triassic salt diapir in the Tunisia Salt Diapir Province. The ores are unconformity and fault-controlled and occur as subvertical column-shaped bodies developed in dissolution-collapse breccias and in cavities within the Late Aptian platform carbonate rocks, which are covered unconformably by impermeable shales and marls of the Fahdene Formation (Late Albian-Cenomanian age). The host rock is hydrothermally altered to ankerite proximal to and within the ore bodies. Quartz, as fine-grained bipyramidal crystals, formed during hydrothermal alteration of the host rocks. The ore mineral assemblage is composed of barite, fluorite, sphalerite, and galena in decreasing abundance. The ore zones outline distinct depositional events: sphalerite-galena, barite-ankerite, and fluorite. Fluid inclusions, commonly oil-rich, have distinct fluid salinities and homogenization temperatures for each of these events: sphalerite-galena (17 to 24 wt% NaCl eq., and Th from 112 to 136 °C); ankerite-barite (11 to 17 wt% NaCl eq., and Th from 100 to 130 °C); fluorite (19 to 21 wt% NaCl eq., Th from 140 to 165 °C). The mean temperature of the ore fluids decreased from sphalerite (125 °C) to barite (115 °C) and increased during fluorite deposition (152 °C); then decreased to ˜110 °C during late calcite precipitation. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of fluid inclusions in fluorite are metal rich (hundreds to thousands ppm Pb, Zn, Cu, Fe) but the inclusions in barite are deficient in Pb, Zn, Cu, Fe. Inclusions in fluorite have Cl/Br and Na/Br ratios of several thousand, consistent with dissolution of halite while the inclusions analysed in barite have values lower than seawater which are indicative of a Br-enriched brine derived from evaporation plus a component of halite dissolution. The salinity of the barite-hosted fluid inclusions is less than obtained simply by the

DESIGNING EDUCATIONAL PROCESS OF FORMING SOCIAL AND PEDAGOGICAL COMPETENCE OF FUTURE PRIMARY SCHOOL TEACHERS IN INCLUSIVE SECONDARY SCHOOL

Directory of Open Access Journals (Sweden)

Zoia Shevtsiv

2017-04-01

Full Text Available The article is devoted to the issue of social and pedagogical competence of future primary school teacher in inclusive secondary schools. The aim of the article is to define the concept “design” and “pedagogical design”; to disclose methodological approaches and main features of pedagogical design of forming of social and pedagogical competence of future primary school teacher in inclusive secondary schools; to identify structural elements of social and pedagogical competence. The article analyzes the essence of the concept “design”. The process of designing educational system of social and pedagogical competence of future primary school teacher in inclusive secondary school is based on several interrelated methodological approaches, including systematic, axiological, active, person-centered, contextual acmeological, and competential ones. Important factors and theoretical starting positions are designing general principles of education: humanism and democracy; principles of teaching, scientific, professional orientation, integrity, communication theory and practice, consistency and systematic, variability, pedagogical creativity. The special principles are the following: problematic, technologizing, dialogization, and competence ones. Social and pedagogical competence of future primary school teachers in inclusive secondary school is structured by the cognitive, active, professional and personal components. Structure components are defined as a synthesis of social and pedagogical competences, educational and developmental, communicative, diagnostic, organizational, predictive, preventive, security and defense, correctional and rehabilitation, adaptation items. Established continuity of the educational process of forming social and pedagogical competence of future primary school teacher in inclusive secondary school takes place during the period of study in higher education establishments. The following conclusions are drawn that

Developing Inclusive Pre-Service and In-Service Teacher Education: Insights from Zanzibar Primary School Teachers

Science.gov (United States)

Juma, Said; Lehtomäki, Elina; Naukkarinen, Aimo

2017-01-01

Developing inclusive teacher education to improve learning and schooling for all children is attracting increasing interest worldwide. This study examined teachers' insights into the development of inclusive teacher education by drawing on collaborative action research conducted by 20 primary school teachers in Zanzibar, Tanzania. The data were…

Surveying Inclusion in Greece: Empirical Research in 2683 Primary School Students

Science.gov (United States)

Soulis, Spyridon-Georgios; Georgiou, Alexandra; Dimoula, Katerina; Rapti, Danai

2016-01-01

Students' point of view for inclusion and for their classmates with disability is essential for its successful implementation. The objectives of this work are to examine the primary school students' attitudes towards students with disabilities. The findings of the research indicate that the majority of typically developing students has a positive…

The Inclusion of Pseudowords within the Year One Phonics "Screening Check" in English Primary Schools

Science.gov (United States)

Gibson, Howard; England, Jennifer

2016-01-01

The paper highlights problems surrounding the Year 1 Phonics Screening Check that has accompanied the legislative framework for synthetic phonics in English primary schools. It investigates the inclusion of pseudowords and raises questions regarding their generation and categorization, the rationale for their inclusion and the assumption that the…

Petrology, isotopic and fluid inclusion studies of eclogites from Sujiahe, NW Dabie Shan (China), July 1 2002

NARCIS (Netherlands)

Fu, B.; Zheng, Y.-F.; Touret, J.L.R.

2002-01-01

In addition to the Triassic Hong'an low-T-high-P eclogite and the Xinxian coesite-bearing kyanite-glaucophane eclogite, Silurian coesite-free amphibole eclogites occur in the Sujiahe region, NW Dabie Shan of central China. A comprehensive study of petrology, Nd-Sr, O-H isotopes and fluid inclusions

Scientific results from the deepened Lopra-1 borehole, Faroe Islands: A reconnaissance study of fluid inclusions in fracture-filling quartz and calcite from the Lopra-1/1A well, Faroe Islands

Directory of Open Access Journals (Sweden)

Konnerup-Madsen, Jens

2006-07-01

Full Text Available Fracture-filling calcite and quartz from the Lopra-1/1A well (at 2380 m and 3543 m depth contains both aqueous low-salinity fluid inclusions and hydrocarbon-dominated fluid inclusions. Microthermometry indicates that the aqueous fluids contain 0.2 to 1.4 equivalent weight% NaCl and occasionally contain traces of hydrocarbons. Homogenisation to liquid occurred between 90°C and 150°C. Modelling based on these fluid inclusion observations indicates that during burial the basaltic section was subjected to temperatures of 160°C and 170°C, occasional pressures of 600–700 bars and the simultaneous percolation of aqueous and hydrocarbon fluids. These fluid conditions may also be relevant to the formation of zeolite observed in the Lopra-1/1A well.

A salt diapir-related Mississippi Valley-type deposit: The Bou Jaber Pb-Zn-Ba-F deposit, Tunisia: Fluid inclusion and isotope study

Science.gov (United States)

Bouhlel, Salah; Leach, David; Johnson, Craig A.; Marsh, Erin; Salmi-Laouar, Sihem; Banks, David A.

2016-01-01

The Bou Jaber Ba-F-Pb-Zn deposit is located at the edge of the Bou Jaber Triassic salt diapir in the Tunisia Salt Diapir Province. The ores are unconformity and fault-controlled and occur as subvertical column-shaped bodies developed in dissolution-collapse breccias and in cavities within the Late Aptian platform carbonate rocks, which are covered unconformably by impermeable shales and marls of the Fahdene Formation (Late Albian–Cenomanian age). The host rock is hydrothermally altered to ankerite proximal to and within the ore bodies. Quartz, as fine-grained bipyramidal crystals, formed during hydrothermal alteration of the host rocks. The ore mineral assemblage is composed of barite, fluorite, sphalerite, and galena in decreasing abundance. The ore zones outline distinct depositional events: sphalerite-galena, barite-ankerite, and fluorite. Fluid inclusions, commonly oil-rich, have distinct fluid salinities and homogenization temperatures for each of these events: sphalerite-galena (17 to 24 wt% NaCl eq., and Th from 112 to 136 °C); ankerite-barite (11 to 17 wt% NaCl eq., and Th from 100 to 130 °C); fluorite (19 to 21 wt% NaCl eq., Th from 140 to 165 °C). The mean temperature of the ore fluids decreased from sphalerite (125 °C) to barite (115 °C) and increased during fluorite deposition (152 °C); then decreased to ∼110 °C during late calcite precipitation. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of fluid inclusions in fluorite are metal rich (hundreds to thousands ppm Pb, Zn, Cu, Fe) but the inclusions in barite are deficient in Pb, Zn, Cu, Fe. Inclusions in fluorite have Cl/Br and Na/Br ratios of several thousand, consistent with dissolution of halite while the inclusions analysed in barite have values lower than seawater which are indicative of a Br-enriched brine derived from evaporation plus a component of halite dissolution. The salinity of the barite-hosted fluid inclusions is less than obtained

Final state effects in inclusive quasielastic electron scattering from nuclei: Clues from quantum fluids

International Nuclear Information System (INIS)

Silver, R.N.; Clark, J.W.

1988-01-01

The impulse approximation (IA) predicts that momentum distributions, n/sub k/, in many-body systems should be measurable by inclusive quasielastic scattering at high energy and momentum (w,Q) transfer. The observations that the cross section appears to satisfy ''Y-scaling'' (i.e., is a function not of both w and Q of a single variable, Y) is usually taken as a signature of the IA. In nuclear physics, inelastic electron scattering at GeV energies should reveal the high momentum components of the nuclear wave function. In quantum fluids, neutron scattering at hundreds of MeV energies should measure the Bose condensate in superfluid /sup 4/He and the Fermi surface discontinuity and depletion of the Fermi sea in /sup 3/He. In molecular and condensed matter systems, X-ray Compton scattering at keV energies reveals electronic n/sub k/. Such experiments test many-body wave functions calculated by methods such as Green Function and Path Integral Monte Carlo, and Fermi Hypernetted Chain. However, an outstanding issue has been the corrections to the IA due to the scattering of the recoiling particle from neighboring particles, which are termed ''final state effects'' (FSE). The FSE should be especially important in nuclei and quantum fluids where the potentials have steeply repulsive cores. While there have been a variety of theories proposed for FSE, until now none has been adequately tested by experiment. Recently, the ''hard core perturbation theory'' (HCPT) for FSE in quantum fluids by Silver has been successfully compared to new neutron scattering measurements on /sup 4/He by P. E. Sokol and colleagues. In this paper, we shall discuss the lessons of this success for the extraction of n/sub k/ in nuclei by inclusive ''quasielastic electron-nucleus scattering'' (QENS). 19 refs., 12 figs

Inclusion of children with autism and ADHD in physical education (PE) at primary school in Denmark

DEFF Research Database (Denmark)

Bentholm, Anette Lisbeth

Inclusion of children with autism and ADHD in physical education (PE) at primary school in DenmarkMore children diagnosed with autism and ADHD have been included in primary school by law in Denmark over the last years (L379, 2012). In a new School reform (L406, 2014) the children have to particip......Inclusion of children with autism and ADHD in physical education (PE) at primary school in DenmarkMore children diagnosed with autism and ADHD have been included in primary school by law in Denmark over the last years (L379, 2012). In a new School reform (L406, 2014) the children have...... to participate in physical activities at least 45 minutes each school day. Autism and ADHD are disabling conditions that affects social communication and interaction, and often also their motor skills and cognition (Harvey & Reid, 2003; Verret, 2010). Therefore these children can be challenge to participate...... a process-oriented methodology (Baur & Ernst, 2011).The methods of the research are primarily based on qualitative methods: Analysis of the curriculum for PE from the Danish ministry of Education and political strategies of inclusion, field observations primarily in PE, interviews with the 11 children...

Dynamics of mineral crystallization from precipitated slab-derived fluid phase: first in situ synchrotron X-ray measurements

Science.gov (United States)

Malaspina, Nadia; Alvaro, Matteo; Campione, Marcello; Wilhelm, Heribert; Nestola, Fabrizio

2015-03-01

Remnants of the fluid phase at ultrahigh pressure (UHP) in subduction environments may be preserved as primary multiphase inclusions in UHP minerals. The mode of crystallization of daughter minerals during precipitation within the inclusion and/or the mechanism of interaction between the fluid at supercritical conditions and the host mineral are still poorly understood from a crystallographic point of view. A case study is represented by garnet-orthopyroxenites from the Maowu Ultramafic Complex (China) deriving from harzburgite precursors metasomatized at ~4 GPa, 750 °C by a silica- and incompatible trace element-rich fluid phase. This metasomatism produced poikilitic orthopyroxene and inclusion-rich garnet porphyroblasts. Solid multiphase primary inclusions in garnet display a size within a few tens of micrometres and negative crystal shapes. Infilling minerals (spinel: 10-20 vol%; amphibole, chlorite, talc, mica: 80-90 vol%) occur with constant volume proportions and derive from trapped solute-rich aqueous fluids. To constrain the possible mode of precipitation of daughter minerals, we performed for the first time a single-crystal X-ray diffraction experiment by synchrotron radiation at Diamond Light Source. In combination with electron probe microanalyses, this measurement allowed the unique identification of each mineral phase and reciprocal orientations. We demonstrated the epitaxial relationship between spinel and garnet and between some hydrous minerals. Such information is discussed in relation to the physico-chemical aspects of nucleation and growth, shedding light on the mode of mineral crystallization from a fluid phase trapped at supercritical conditions.

CT study in primary low spinal fluid pressure syndrome

Energy Technology Data Exchange (ETDEWEB)

Hoshino, Moritoshi; Okayama, Kenji; Kubo, Hiromasa; Watanabe, Hiromi; Endou, Riuko (Ohmiya Red Cross Hospital, Yono, Saitama (Japan))

1991-02-01

CT findings in primary low spinal fluid pressure syndrome were studied on the basis of 3 cases. Case 1 was a 43-year-old male with a complicated bilateral isodense subdural hematoma (SDH). Case 2 was a 45-year-old female with a complicated bilateral high dense SDH. Case 3 was a 36-year-old female discharged without any complications after spinal fluid pressure normalized. Slight downward displacement of the brain under low spinal fluid pressure was shown as the narrowing of a Sylvian fissures and infratentorial cisterns on CT. On the other hand, in this syndrome with a complicated bilateral isodense SDH, in addition to this finding, CT revealed distortion and narrowing of body lateral ventricles, which might be differential findings from this syndrome without complicated SDH. Under low spinal fluid pressure, bridging veins are more stretched by a downward displacement of the brain. And consequently they were easily injured and SDH was developed. (author).

Geothermometry obtained from the calcite twin and fluid inclusions in barite (Irankuh Pb-Zn deposit, Southwest of Isfahan

Directory of Open Access Journals (Sweden)

Alijan Aftabi

2017-03-01

Full Text Available The Irankuh mining district is located 20 km southwest of Isfahan and is geologically situated in Sanandaj - Sirjan zone and the lower Cretaceous sequence of Isfahan-Malayer ore mineralization area. The ore minerals are emplaced in the faulted contact of Jurassic shale and Cretaceous carbonates and include pyrite, galena, sphalerite, calcite, barite, dolomite, quartz as well as minor marcasite, smithsonite, cerussite, gypsum, malachite, hematite and goethite. The mineralization is mainly occurred as hydrothermal veins and veinlets associated with fractures and faults, suggesting the deposit is likely to be of epigenetic type. A comparison between geothermometric results obtained from calcite twins and fluid inclusions showed a similar temperature range for the mineralization (less than 170ºc. Fluid inclusion studies indicate the temperature, salinity and density ranges of 80-166ºc, 5.39-20.94 wt.% NaCl and 0.95-1.12, respectively. The obtained data share many similarities with those of the MVT deposits

Water- and Boron-Rich Melt Inclusions in Quartz from the Malkhan Pegmatite, Transbaikalia, Russia

Directory of Open Access Journals (Sweden)

Elena Badanina

2012-11-01

Full Text Available In this paper we show that the pegmatite-forming processes responsible for the formation of the Malkhan pegmatites started at magmatic temperatures around 720 °C. The primary melts or supercritical fluids were very water- and boron-rich (maximum values of about 10% (g/g B2O3 and over the temperature interval from 720 to 600 °C formed a pseudobinary solvus, indicated by the coexistence of two types of primary melt inclusions (type-A and type-B representing a pair of conjugate melts. Due to the high water and boron concentration the pegmatite-forming melts are metastable and can be characterized either as genuine melts or silicate-rich fluids. This statement is underscored by Raman spectroscopic studies. This study suggested that the gel state proposed by some authors cannot represent the main stage of the pegmatite-forming processes in the Malkhan pegmatites, and probably in all others. However there are points in the evolution of the pegmatites where the gel- or gel-like state has left traces in form of real gel inclusions in some mineral in the Malkhan pegmatite, however only in a late, fluid dominated stage.

Fluid Inclusion and Oxygen Isotope Constraints on the Origin and Hydrothermal Evolution of the Haisugou Porphyry Mo Deposit in the Northern Xilamulun District, NE China

Directory of Open Access Journals (Sweden)

Qihai Shu

2017-01-01

Full Text Available The Haisugou porphyry Mo deposit is located in the northern Xilamulun district, northeastern China. Based on alteration and mineralization styles and crosscutting relationships, the hydrothermal evolution in Haisugou can be divided into three stages: an early potassic alteration stage with no significant metal deposition, a synmineralization sericite-chlorite alteration stage with extensive Mo precipitation, and a postmineralization stage characterized by barren quartz and minor calcite and fluorite. The coexistence of high-salinity brine inclusions with low-salinity inclusions both in potassic alteration stage (~440°C and locally in the early time of mineralization stage (380–320°C indicates the occurrence of fluid boiling. The positive correlations between the homogenization temperatures and the salinities of the fluids and the low oxygen isotopic compositions (δ18Ofluid < 3‰ of the syn- to postmineralization quartz together suggest the mixing of magmatic fluids with meteoric water, which dominated the whole mineralization process. The early boiling fluids were not responsible for ore precipitation, whereas the mixing with meteoric water, which resulted in temperature decrease and dilution that significantly reduced the metal solubility, should have played the major role in Mo mineralization. Combined fluid inclusion microthermometry and chlorite geothermometer results reveal that ore deposition mainly occurred between 350 and 290°C in Haisugou.

Awareness and Attitudes of Primary Grade Teachers (1-4thGrade) towards Inclusive Education

OpenAIRE

P. Maheshwari; M. Shapurkar

2015-01-01

The present research aimed at studying the awareness and attitudes of teachers towards inclusive education. The sample consisted of 60 teachers, teaching in the primary section (1st – 4th) of regular schools affiliated to the SSC board in Mumbai. Sample was selected by Multi-stage cluster sampling technique. A semi-structured self-constructed interview schedule and a self-constructed attitude scale was used to study the awareness of teachers about disability and Inclusive...

The Self-Efficacy of Primary Teachers in Supporting the Inclusion of Children with Autism Spectrum Disorder

Science.gov (United States)

Anglim, Johanna; Prendeville, Paula; Kinsella, William

2018-01-01

In the context of a trend towards inclusive practice in Irish primary schools, many teachers feel ill-equipped to cope with this new challenge. Scope exists within the Irish education system to transform mainstream schools into autistic spectrum disorder (ASD) friendly environments. Research into teacher perceptions of inclusion has found that…

Bicarbonate-rich fluid inclusions and hydrogen diffusion in quartz from the Libčice orogenic gold deposit, Bohemian Massif

Czech Academy of Sciences Publication Activity Database

Hrstka, Tomáš; Dubessy, J.; Zachariáš, J.

2011-01-01

Roč. 281, 3-4 (2011), s. 317-332 ISSN 0009-2541 Institutional research plan: CEZ:AV0Z30130516 Keywords : bicarbonate * fluid inclusions * hydrogen diffusion * orogenic gold deposits * raman spectroscopy Subject RIV: DB - Geology ; Mineralogy Impact factor: 3.518, year: 2011

Extremely halophilic archaea from ancient salt sediments and their possible survival in halite fluid inclusions

Science.gov (United States)

Stan-Lotter, H.; Fendrihan, S.; Gerbl, F. W.; Dornmayr-Pfaffenhuemer, M.; Frethem, C.

2008-09-01

Halophilic archaebacteria (haloarchaea) thrive in environments with salt concentrations approaching saturation, such as natural brines, marine solar salterns and alkaline salt lakes; they have also been isolated from ancient subsurface salt sediments of great geological age (195-280 million years) and some of those strains were described as novel species (1). The cells survived perhaps while being enclosed within small fluid inclusions in the halite. The characterization of subsurface microbial life is of astrobiological relevance since extraterrestrial halite has been detected and since microbial life on Mars, if existent, may have retreated into the subsurface. We attempted to simulate the embedding process of extremely halophilic archaea and to analyse any cellular changes which might occur. When enclosing haloarchaea in laboratory grown halite, cells accumulated preferentially in fluid inclusions, as could be demonstrated by pre-staining with fluorescent dyes. With increased time of embedding, rod-shaped cells of Halobacterium salinarum strains were found to assume roundish morphologies. Upon dissolution of the salt crystals, these spheres were stable and viable for months when kept in buffers containing 4 M NaCl. Scanning electron microscopy (SEM) following fixation with glutaraldehyde suggested a potentially gradual transformation from rods to spheres. This notion was supported by fluorescence microscopy of Halobacterium cells, following embedding in halite and staining with SYTO 9. One-dimensional protein patterns of rods and spheres, following SDS polyacrylamide gel electrophoresis, were similar except that the S-layer protein appeared reduced by about 15 - 20 % in spheres. The reddish-orange pigmentation of spheres was much lighter compared to that of rod-shaped cells, suggesting lowered concentrations of carotenoids; this was confirmed by extraction and spectrometry of pigments. The data suggested that Halobacterium cells are capable of forming specific

Evolution of the magmatic-hydrothermal acid-sulfate system at Summitville, Colorado: Integration of geological, stable-isotope, and fluid-inclusion evidence

Science.gov (United States)

Bethke, P.M.; Rye, R.O.; Stoffregen, R.E.; Vikre, P.G.

2005-01-01

The Summitville Au-Ag-Cu deposit is a classic volcanic dome-hosted high-sulfidation deposit. It occurs in the Quartz Latite of South Mountain, a composite volcanic dome that was emplaced along the coincident margins of the Platoro and Summitville calderas at 22.5??0.5 Ma, penecontemporaneous with alteration and mineralization. A penecontemporaneous quartz monzonite porphyry intrusion underlies the district and is cut and overlain by pyrite-quartz stockwork veins with traces of chalcopyrite and molybdenite. Alteration and mineralization proceeded through three hypogene stages and a supergene stage, punctuated by at least three periods of hydrothermal brecciation. Intense acid leaching along fractures in the quartz latite produced irregular pipes and lenticular pods of vuggy silica enclosed sequentially by alteration zones of quartz-alunite, quartz-kaolinite, and clay. The acid-sulfate-altered rocks host subsequent covellite+enargite/luzonite+chalcopyrite mineralization accompanied by kaolinite, and later barite-base-metal veins, some containing high Au values and kaolinite. The presence of both liquid- and vapor-rich fluid inclusions indicates the episodic presence of a low-density fluid at all levels of the system. In the mineralized zone, liquid-rich fluid inclusions in healed fractures in quartz phenocrysts and in quartz associated with mineralization homogenize to temperatures between 160 and 390 ??C (90% between 190 and 310 ??C), consistent with the range (200-250 ??C) estimated from the fractionation of sulfur isotopes between coexisting alunite and pyrite. A deep alunite-pyrite pair yielded a sulfur-isotope temperature of 390 ??C, marking a transition from hydrostatic to lithostatic pressure at a depth of about 1.5 km. Two salinity populations dominate the liquid-rich fluid inclusions. One has salinities between 0 and 5 wt.% NaCl equivalent; the other has salinities of up to 43 wt.% NaCl equivalent. The occurrence of high-salinity fluid inclusions in vein

Advancing the use of noble gases in fluid inclusions of speleothems as a palaeoclimate proxy. Method and standardization

International Nuclear Information System (INIS)

Papp, L.; Palcsu, L.; Major, Z.; Svingor, E.

2010-01-01

Complete text of publication follows. Continental carbonates are essential archives of the past geological and climatological occurrences. Recently, fluid inclusions of carbonates have got into focus of palaeoclimate research. A new approach using temperature dependent gas solubilities might be a way that uses only physical laws, e.g. the Henry's law of solubility and gas partitioning models. The so-called noble gas temperature (NGT) can be calculated from the measured noble gas concentrations. This report describes how our first advancing steps towards obtaining NGT's from fluid inclusions and tiny water amounts have been preformed. To extract the water inclusions from the carbonate matrix, the most suitable treatment is to crush the carbonate under vacuum. The water released from the inclusions is then collected in a cold finger by freezing. The amount of the liberated water is measured via its vapour pressure in a certain volume (Fig. 1). The liberated dissolved noble gases which were in the fluid inclusions are separated by a cryo system, and then admitted into the static mode noble gas mass spectrometer sequentially. The calibration of the noble gas mass spectrometric measurements is performed by means of well known air aliquots. To check the reliability of the whole measurement procedure standard water samples have to be measured. As for standard samples, first we have prepared air equilibrated water (AEW) in conditioned circumstances. We fill copper capillaries with AEW. Having completed the copper capillary assemblage, the AEW is letting flow through the capillary (Fig. 2). The error of such a water determination is less than 1% in case of 1 μl of liquid water (Fig. 1) that allows us to determine accurate noble gas concentrations. The reproducibility of 40 Ar measurements is better than 0.6 %, while those of neon, krypton and xenon isotopes are 0.6-1.6 %, 0.9-2.2 % and 0.8-2.0 %, respectively. Theoretically, these precisions for noble gas concentrations

Tolerable and Inclusive Learning Spaces: An Evaluation of Policies and Specifications for Physical Environments That Promote Inclusion in Turkish Primary Schools

Science.gov (United States)

Erkilic, Mualla; Durak, Selen

2013-01-01

Inclusive education (IE), which calls for equal opportunities for students with diverse abilities in the achievement of knowledge, has been developed as a central pedagogical strategy in primary schools worldwide, including those in Turkey. Besides educators, the issue of IE becomes an important discussion area among designers who question the…

Effects of post-burial siliceous diagenesis deformations on the microthermometric behaviour of fluid inclusions: an example in the Francevillian uraniferous sandstone reservoir (Gabon)

International Nuclear Information System (INIS)

Gauthier-Lafaye, F.; Weber, F.

1984-01-01

New data about fluid inclusions associated to a siliceous diagenesis show that a deformation phase in the first stage of catagenesis disturbed their microthermometric behaviour. Nevertheless, temperature and pressure of fluids associated to the uraniferous paragenesis and contemporary with the Oklo natural reactors are estimated at 140-160 0 C and 250-500 bar [fr

From Vision to Reality: Views of Primary School Principals on Inclusive Education in New South Wales, Australia

Science.gov (United States)

Graham, Linda J.; Spandagou, Ilektra

2011-01-01

This paper discusses the findings of a research study that used semi-structured interviews to explore the views of primary school principals on inclusive education in New South Wales, Australia. Content analysis of the transcript data indicates that principals' attitudes towards inclusive education and their success in engineering inclusive…

A case of primary osseous malignant immunoblastic B-cell lymphoma with intracytoplasmic mu lambda immunoglobulin inclusions.

Science.gov (United States)

Fiche, M; Le Tourneau, A; Audouin, J; Touzard, R C; Diebold, J

1990-02-01

Primary malignant lymphoma of bone, so-called Parker-Jackson reticulosarcoma, is a rare form of extranodal lymphoma with a relatively good prognosis. It often corresponds to B-cell lymphoma of high-grade malignancy. We report a case of mu lambda immunoblastic lymphoma showing two distinctive features: an abundant reactive T-lymphocytic population and unusual intra-cytoplasmic inclusions. These inclusions were PAS positive and consisted of monotypic mu lambda immunoglobulin localized in peculiar aggregates of rough endoplasmic reticulum. Their morphological appearances resembled the well-documented inclusions described in some varieties of non-Hodgkin's lymphoma.

Primary Intracranial Sarcoma Presenting as Chronic Subdural Fluid Collections in a Child.

Science.gov (United States)

Glenn, Chad A; Fung, Kar-Ming; Tullos, Hurtis J; McNall-Knapp, Rene Y; Gunda, Divya; Mapstone, Timothy B

2016-02-01

Chronic subdural hematoma in the pediatric population often results from trauma. Asymptomatic and benign-appearing subdural collections are generally managed conservatively without operative intervention. Primary intracranial sarcomas are uncommon entities. Diagnosis of sarcoma can be difficult because these lesions often manifest as apparent hematoma. Presented is the case of a primary intracranial mucoid spindle cell sarcoma that arose in a child with a history of benign-appearing bilateral subdural fluid collections in the setting of nonaccidental trauma. The patient was initially managed conservatively because her neurological examination result was normal and her subdural collections decreased in size on repeated imaging. The collections did not resolve completely. Years later, she exhibited weakness, seizure, and an increase in the size of her subdural fluid collection. Subdural drainage was attempted without significant effect. Cytologic assessment of fluid was negative for malignant cells. Magnetic resonance imaging revealed multiple enhancing masses along the subdural collection. The patient eventually underwent craniotomy in which a diagnosis of sarcoma was obtained. Pathological and radiographic findings as well as oncological management are reviewed. The authors also review the natural history and treatment of primary intracranial sarcoma in the pediatric population. Early contrasted magnetic resonance imaging should be obtained in patients with subdural fluid collections that appear asymmetric or do not resolve in the expected time course, despite having a normal neurologic examination result. Negative cytologic assessment does not exclude sarcoma diagnosis. Copyright © 2016 Elsevier Inc. All rights reserved.

Fluid inclusion characteristics and molybdenite Re-Os geochronology of the Qulong porphyry copper-molybdenum deposit, Tibet

Science.gov (United States)

Li, Yang; Selby, David; Feely, Martin; Costanzo, Alessandra; Li, Xian-Hua

2017-02-01

The Qulong porphyry copper and molybdenum deposit is located at the southwest margin of the Lhasa Terrane and in the eastern region of the Gangdese magmatic belt. It represents China's largest porphyry copper system, with ˜2200 million tonnes of ore comprising 0.5 % Cu and 0.03 % Mo. The mineralization is associated with Miocene granodiorite, monzogranite and quartz-diorite units, which intruded into Jurassic volcanic units in a post-collisional (Indian-Asian) tectonic setting. Field observations and core logging demonstrate the alteration and mineralization at Qulong are akin to typical porphyry copper systems in subduction settings, which comprise similar magmatic-hydrothermal, potassic, propylitic and phyllic alteration assemblages. Molybdenite Re-Os geochronology confirms the relative timeframe defined by field observations and core logging and indicates that the bulk copper and molybdenum at Qulong were deposited within 350,000 years: between 16.10 ± 0.06 [0.08] (without and with decay constant uncertainty) and 15.88 ± 0.06 [0.08] Ma. This duration for mineralization is in direct contrast to a long-lived intrusive episode associated with mineralization based on previous zircon U-Pb data. Our fluid inclusion study indicates that the ore-forming fluid was oxidized and contained Na, K, Ca, Fe, Cu, Mo, Cl and S. The magmatic-hydrothermal transition occurred at ˜425 °C under lithostatic pressure, while potassic, propylitic and phyllic alteration occurred at hydrostatic pressure with temperature progressively decreasing from 425 to 280 °C. The fluid inclusion data presented here suggests that there has been ˜2.3 km of erosion at Qulong after its formation, and this erosion may be related to regional uplift of the Lhasa Terrane.

Sr isotope geochemistry of East Alpine mineral deposits and mass spectrometric analyses of fluid inclusions

International Nuclear Information System (INIS)

Grum, W.

1995-05-01

Strontium isotope geochemistry and deformational history of selected carbonate-hosted deposits from different tectonic positions in the Eastern Alps were studied. In this context an equipment has been constructed to analyze the composition of volatile components of fluid inclusions (FI). Based on the results of Sr-isotopic investigations two groups of deposits are discriminated: Deposits formed by formation waters and/or metamorphogenic fluids: Tux (magnesite, scheelite), Otterzug (barite), Lassing (magnesite), Rabenwald (talc), Laussa and Mooseck (fluorite). The mineralizing fluids are derived from different sedimentary rock series and therefore 87 Sr/ 86 Sr-ratios vary between 0.707 and 0.719. Deposits situated along fault zones: Lassing (talc), Gasteiner Tal (Silberpfennig area; gold), Schlaining (stibnite) and Waldenstein (specularite). Sr isotope ratios of the mineralizing fluids from Lassing, Waldenstein and Schlaining ranges from 0.7112 to 0.7127 and are therefore thought to have scavenged the East Alpine crystalline. The mineralizing solutions of the Gasteiner Tal deposit may either have equilibrated with low radiogenic sedimentary or with (ultra-)basic rocks. A cracking chamber has been constructed in order to open FI by cracking for mass spectrometric analysis of volatile components. Gases are analysed using a quadrupole mass spectrometer. The desorption of gas from metal and sample surfaces during cracking can be neglected. The amount of gas released from the mineral lattices was studied. With that fast method ore bearing from barren host rocks have been distinguished by different composition of the FI at the Brixlegg barite mineralization (Eastern Alps). Within the Galway fluorite deposit (Ireland) different fluids were involved and mass spectrometric analysis were carried out to characterize these different fluids and to identify their origin. (author)

Fluid inclusion and noble gas studies of the Dongping gold deposit, Hebei Province, China: A mantle connection for mineralization?

Science.gov (United States)

Mao, J.; Li, Y.; Goldfarb, R.; He, Y.; Zaw, K.

2003-01-01

The Dongping gold deposit (>100 t Au) occurs about 200 km inboard of the northern margin of the North China craton. The deposit is mainly hosted by syenite of a middle Paleozoic alkalic intrusive complex that was emplaced into Late Archean basement rocks. Both groups of rocks are intruded by Late Jurassic to Early Cretaceous crustal-melt granite dikes and stocks, some within a few kilometers of the deposit. The gold ores were deposited during this latter magmatic period at about 150 Ma, a time that was characterized by widespread regional north-south compression that formed the east-west-trending Yanshan deformational belt. The ores include both the telluride mineral-bearing, low sulfide quartz veins and the highly K-feldspar-altered syenite, with most of the resource concentrated in two orebodies (1 and 70). Fluid inclusion microthermometry indicates heterogeneous trapping of low-salinity (e.g., 5-7 wt % NaCl equiv) fluids that varied from a few to 60 mole percent nonaqueous volatile species. Laser Raman spectroscopy confirms that the vapor phase in these inclusions is dominated by CO2, but may be comprised of as much as 9 mole percent H2S and 20 mole percent N2; methane concentrations in the vapor phase are consistently interaction of ore fluids with surrounding crustal rocks, which may have contributed additional He to the fluids. A mantle source for at least some of the components of the gold-forming fluid is consistent with upwelling of hot asthenosphere and erosion of as much as 100 to 150 km of cool Archean lithosphere beneath the craton during this time. The Dongping deposit is located along the 100-km-wide north-south gravity lineament, which marks the western border of the thinned crust. As both regional metamorphism of Mesoproterozoic and younger cover rocks, and widespread granite magmatism, also occurred at ca. 150 Ma, it is unclear as to whether one or both of these also contributed fluid and/or metals to the hydrothermal system. Importantly, these

Fluid-fluid level on MR image: significance in Musculoskeletal diseases

Energy Technology Data Exchange (ETDEWEB)

Chung, Hye Won; Lee, Kyung Won [Seoul Naitonal University, Seoul (Korea, Republic of). Coll. of Medicine; Song, Chi Sung [Seoul City Boramae Hospital, Seoul (Korea, Republic of); Han, Sang Wook; Kang, Heung Sik [Seoul Naitonal University, Seoul (Korea, Republic of). Coll. of Medicine

1998-01-01

To evaluate the frequency, number and signal intensity of fluid-fluid levels of musculoskeletal diseases on MR images, and to determine the usefulness of this information for the differentiation of musculoskeletal diseases. MR images revealed fluid-fluid levels in the following diseases : giant cell tumor(6), telangiectatic osteosarcoma(4), aneurysmal bone cyst(3), synovial sarcoma(3), chondroblastoma(2), soft tissue tuberculous abscess(2), hematoma(2), hemangioma (1), neurilemmoma(1), metastasis(1), malignant fibrous histiocytoma(1), bursitis(1), pyogenic abscess(1), and epidermoid inclusion cyst(1). Fourteen benign tumors and ten malignant, three abscesses, and the epidermoid inclusion cyst showed only one fluid-fluid level in a unilocular cyst. On T1-weighted images, the signal intensities of fluid varied, but on T2-weighted images, superior layers were in most cases more hyperintense than inferior layers. Because fluid-fluid layers are a nonspecific finding, it is difficult to specifically diagnose each disease according to the number of fluid-fluid levels or signal intensity of fluid. In spite of the nonspecificity of fluid-fluid levels, they were frequently seen in cases of giant cell tumor, telangiectatic osteosarcoma, aneurysmal bone cycle, and synovial sarcoma. Nontumorous diseases such abscesses and hematomas also demonstrated this finding. (author). 11 refs., 1 tab., 4 figs.

Fluid-fluid level on MR image: significance in Musculoskeletal diseases

International Nuclear Information System (INIS)

Chung, Hye Won; Lee, Kyung Won; Han, Sang Wook; Kang, Heung Sik

1998-01-01

To evaluate the frequency, number and signal intensity of fluid-fluid levels of musculoskeletal diseases on MR images, and to determine the usefulness of this information for the differentiation of musculoskeletal diseases. MR images revealed fluid-fluid levels in the following diseases : giant cell tumor(6), telangiectatic osteosarcoma(4), aneurysmal bone cyst(3), synovial sarcoma(3), chondroblastoma(2), soft tissue tuberculous abscess(2), hematoma(2), hemangioma (1), neurilemmoma(1), metastasis(1), malignant fibrous histiocytoma(1), bursitis(1), pyogenic abscess(1), and epidermoid inclusion cyst(1). Fourteen benign tumors and ten malignant, three abscesses, and the epidermoid inclusion cyst showed only one fluid-fluid level in a unilocular cyst. On T1-weighted images, the signal intensities of fluid varied, but on T2-weighted images, superior layers were in most cases more hyperintense than inferior layers. Because fluid-fluid layers are a nonspecific finding, it is difficult to specifically diagnose each disease according to the number of fluid-fluid levels or signal intensity of fluid. In spite of the nonspecificity of fluid-fluid levels, they were frequently seen in cases of giant cell tumor, telangiectatic osteosarcoma, aneurysmal bone cycle, and synovial sarcoma. Nontumorous diseases such abscesses and hematomas also demonstrated this finding. (author). 11 refs., 1 tab., 4 figs

Origin of the Okrouhlá Radouň episyenite-hosted uranium deposit, Bohemian Massif, Czech Republic: fluid inclusion and stable isotope constraints

Czech Academy of Sciences Publication Activity Database

Dolníček, Z.; René, Miloš; Hermannová, S.; Prochaska, W.

2014-01-01

Roč. 49, č. 4 (2014), s. 409-425 ISSN 0026-4598 R&D Projects: GA MŠk ME10083 Institutional support: RVO:67985891 Keywords : Bohemian Massif * Uranium mineralization * Episyenite * Fluid inclusions Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.561, year: 2014

The sources and evolution of mineralising fluids in iron oxide-copper-gold systems, Norrbotten, Sweden: Constraints from Br/Cl ratios and stable Cl isotopes of fluid inclusion leachates

Science.gov (United States)

Gleeson, S. A.; Smith, M. P.

2009-10-01

We have analysed the halogen concentrations and chlorine stable isotope composition of fluid inclusion leachates from three spatially associated Fe-oxide ± Cu ± Au mineralising systems in Norrbotten, Sweden. Fluid inclusions in late-stage veins in Fe-oxide-apatite deposits contain saline brines and have a wide range of Br/Cl molar ratios, from 0.2 to 1.1 × 10 -3 and δ 37Cl values from -3.1‰ to -1.0‰. Leachates from saline fluid inclusions from the Greenstone and Porphyry hosted Cu-Au prospects have Br/Cl ratios that range from 0.2 to 0.5 × 10 -3 and δ 37Cl values from -5.6‰ to -1.3‰. Finally, the Cu-Au deposits hosted by the Nautanen Deformation Zone (NDZ) have Br/Cl molar ratios from 0.4 to 1.1 × 10 -3 and δ 37Cl values that range from -2.4‰ to +0.5‰, although the bulk of the data fall within 0‰ ± 0.5‰. The Br/Cl ratios of leachates are consistent with the derivation of salinity from magmatic sources or from the dissolution of halite. Most of the isotopic data from the Fe-oxide-apatite and Greenstone deposits are consistent with a mantle derived source of the chlorine, with the exception of the four samples with the most negative values. The origin of the low δ 37Cl values in these samples is unknown but we suggest that there may have been some modification of the Cl-isotope signature due to fractionation between the mineralising fluids and Cl-rich silicate assemblages found in the alteration haloes around the deposits. If such a process has occurred then a modified crustal source of the chlorine for all the samples cannot be ruled out although the amount of fractionation necessary to generate the low δ 37Cl values would be significantly larger. The source of Cl in the NDZ deposits has a crustal signature, which suggests the Cl in this system may be derived from (meta-) evaporites or from input from crustal melts such as granitic pegmatites of the Lina Suite.

Constraining the origin of the Messinian gypsum deposits using coupled measurement of δ^{18}O$/δD in gypsum hydration water and salinity of fluid inclusions

Science.gov (United States)

Evans, Nicholas P.; Gázquez, Fernando; McKenzie, Judith A.; Chapman, Hazel J.; Hodell, David A.

2016-04-01

We used oxygen and hydrogen isotopes of gypsum hydration water (GHW) coupled with salinity deduced from ice melting temperatures of primary fluid inclusions in the same samples (in tandem with 87Sr/86Sr, δ34S and other isotopic measurements) to determine the composition of the mother fluids that formed the gypsum deposits of the Messinian Salinity Crisis from shallow and intermediate-depth basins. Using this method, we constrain the origin of the Messinian Primary Lower Gypsum (PLG) of the Sorbas basin (Betic foreland) and both the Upper Gypsum (UG) and the Lower Gypsum of the Sicilian basin. We then compare these results to measurements made on UG recovered from the deep Ionian and Balearic basins drilled during DSDP Leg 42A. The evolution of GHW δ18O/δD vs. salinity is controlled by mixing processes between fresh and seawater, coupled with the degree of evaporation. Evaporation and subsequent precipitation of gypsum from fluids dominated by freshwater will result in a depressed 87Sr/86Sr values and different trajectory in δ18O/δD vs. salinity space compared to fluids dominated by seawater. The slopes of these regression equations help to define the end-members from which the fluid originated. For example, salinity estimates from PLG cycle 6 in the Sorbas basin range from 18 to 51ppt, and after correction for fractionation factors, estimated δ18O and δD values of the mother water are low (-2.6 meteoric water during gypsum deposition, while 87Sr/86Sr (0.708942 fall below those expected from the evaporation of seawater alone, the slope of the regression equation is similar to that of seawater evaporation. This implies that there is a change up-section from a dominantly marine environment in cycle 2 to a greater influence of meteoric water in cycle 6. The UG from the Sicilian basin display greater δ18O/δD values (2.9 meteoric water that subsequently underwent intense evaporation. This observation concurs with the low values of 87Sr/86Sr from the same UG

Mineralogy, fluid inclusion petrography, and stable isotope geochemistry of Pb-Zn-Ag veins at the Shizhuyuan deposit, Hunan Province, southeastern China

Science.gov (United States)

Wu, Shenghua; Mao, Jingwen; Yuan, Shunda; Dai, Pan; Wang, Xudong

2018-01-01

The Shizhuyuan polymetallic deposit is located in the central part of the Nanling region, southeastern China, and consists of proximal W-Sn-Mo-Bi skarns and greisens and distal Pb-Zn-Ag veins. The sulfides and sulfosalts in the distal veins formed in three distinct stages: (1) an early stage of pyrite and arsenopyrite, (2) a middle stage of sphalerite and chalcopyrite, and (3) a late stage of galena, Ag-, Sn-, and Bi-bearing sulfides and sulfosalts, and pyrrhotite. Combined sulfide and sulfosalt geothermometry and fluid inclusion analyses indicate that the early stage of mineralization occurred at a temperature of 400 °C and involved boiling under hydrostatic pressure ( 200 bar), with the temperature of the system dropping during the late stage to 200 °C. Laser Raman analysis indicates that the fluid inclusions within the studied minerals are dominated by H2O, although some contain carbonate solids and CH4 gas. Vein-hosted sulfides have δ34S values of 3.8-6.3‰ that are interpreted as indicative of a magmatic source of sulfur. The mineralization process can be summarized as follows: an aqueous fluid exsolved on final crystallization of the Qianlishan pluton, ascended along fracture zones, cooled to <400 °C, and boiled under hydrostatic conditions, and with decreasing temperature and sulfur fugacity, sulfide and sulfosalt minerals precipitated successively from the Ag-Cu-Zn-Fe-Pb-Sb-As-S-bearing fluid system.

Geology and ore fluid geochemistry of the Jinduicheng porphyry molybdenum deposit, East Qinling, China

Science.gov (United States)

Li, Hongying; Ye, Huishou; Wang, Xiaoxia; Yang, Lei; Wang, Xiuyuan

2014-01-01

Jinduicheng deposit is a giant Mesozoic porphyry Mo system deposit in the East Qinling molybdenum belt, Shaanxi Province, China. The mineralization is associated with the I-type Jinduicheng granite porphyry. Both the porphyry stock and country rocks underwent intense hydrothermal alteration. The alteration, with increasing distance from the parent intrusion, changes from silicification, through potassic and phyllic assemblages, carbonation, to propylitic assemblages. Molybdenite, the dominant ore mineral, occurs in veinlets, most of which are hosted by the altered country rocks, with less than 25% of the ore in the porphyry body. The hydrothermal system comprises four stages, including pre-ore quartz and K-feldspar; two ore stages of quartz, K-feldspar, molybdenite, and Pb- And Zn-bearing sulfides; and post-ore quartz and carbonate. Six main types of primary fluid inclusions are present in hydrothermal quartz, including two-phase aqueous, one-phase aqueous, three-phase CO2-bearing, CO2-dominated fluid inclusions, gas inclusions, and melt inclusions. The homogenization temperatures of fluid inclusions range from 210 to 290 °C in the pre-ore stage, 150-310 °C in ore stage I, 150-360 °C in the ore stage II, and 195-325 °C in the post-ore stage quartz. Estimated salinities of the ore-forming fluids range from 6.9 to 13.5, 4.3 to 12.3, 6.2 to 12.4, and 3.4 to 9.9 wt.% NaCl equiv. in stages 1-4, respectively. The δ34S values of pyrite in the two ore stages range from 2.8‰ to 4.3‰, whereas the δ34S values of molybdenite range from 2.9‰ to 6.2‰. The data suggest both magmatic and crustal sources of sulfur. The δD and δ18O values for the hydrothermal fluids are -57.2‰ to -84.4‰ and 8.0‰ to -3.2‰, respectively. The fluid inclusion and stable data indicate that the pre-ore hydrothermal fluids were mostly of magmatic origin, but the fluids responsible for ore deposition were mixed magmatic and meteoric, and eventually meteoric water dominated the system

Origin and evolution of mineralizing fluids and exploration of the Cerro Quema Au-Cu deposit (Azuero Peninsula, Panama) from a fluid inclusion and stable isotope perspective

Science.gov (United States)

Corral, Isaac; Cardellach, Esteve; Corbella, Merce; Canals, Angels; Griera, Albert; Gomez-Gras, David; Johnson, Craig A.

2017-01-01

Cerro Quema is a high sulfidation epithermal Au-Cu deposit with a measured, indicated and inferred resource of 35.98 Mt. @ 0.77 g/t Au containing 893,600 oz. Au (including 183,930 oz. Au equiv. of Cu ore). It is characterized by a large hydrothermal alteration zone which is interpreted to represent the lithocap of a porphyry system. The innermost zone of the lithocap is constituted by vuggy quartz with advanced argillic alteration locally developed on its margin, enclosed by a well-developed zone of argillic alteration, grading to an external halo of propylitic alteration. The mineralization occurs in the form of disseminations and microveinlets of pyrite, chalcopyrite, enargite, tennantite, and trace sphalerite, crosscut by quartz, barite, pyrite, chalcopyrite, sphalerite and galena veins.Microthermometric analyses of two phase (L + V) secondary fluid inclusions in igneous quartz phenocrysts in vuggy quartz and advanced argillically altered samples indicate low temperature (140–216 °C) and low salinity (0.5–4.8 wt% NaCl eq.) fluids, with hotter and more saline fluids identified in the east half of the deposit (Cerro Quema area).Stable isotope analyses (S, O, H) were performed on mineralization and alteration minerals, including pyrite, chalcopyrite, enargite, alunite, barite, kaolinite, dickite and vuggy quartz. The range of δ34S of sulfides is from − 4.8 to − 12.7‰, whereas δ34S of sulfates range from 14.1 to 17.4‰. The estimated δ34SΣS of the hydrothermal fluid is − 0.5‰. Within the advanced argillic altered zone the δ34S values of sulfides and sulfates are interpreted to reflect isotopic equilibrium at temperatures of ~ 240 °C. The δ18O values of vuggy quartz range from 9.0 to 17.5‰, and the δ18O values estimated for the vuggy quartz-forming fluid range from − 2.3 to 3.0‰, indicating that it precipitated from mixing of magmatic fluids with surficial fluids. The δ18O of kaolinite ranges from 12.7 to 18.1‰ and �

Melt, fluid and crystal inclusions in olivine phenocrysts from Kerguelen plume-derived picritic basalts: evidence for interaction with the Kerguelen Plateau lithosphere.

NARCIS (Netherlands)

Borisova, A.U.; Nikogosian, I.; Shimizu, N.; Weis, D.; Scoates, J.S.; Touret, J.L.R.; Damasceno, D.

2002-01-01

Melt, fluid and crystal inclusions have been studied in olivine phenocrysts from a suite of picritic basalts dredged during the "Marion Dufresne" MD 109 cruise (Dredge 6) from a seamount located between the Kerguelen Archipelago and Heard Island (Southern Indian Ocean). A two-stage polybaric

An isotopic and fluid inclusion study of fracture calcite from borehole OL-KR1 at the Olkiluoto site, Finland

International Nuclear Information System (INIS)

Blyth, A.; Frape, S.; Blomqvist, R.; Nissinen, P.; McNutt, R.

1998-04-01

A study of the geochemistry of fracture filling calcite in borehole OL-KR1 at the radioactive waste disposal investigation site Olkiluoto (in Finland) was undertaken in 1998. The purpose of the present study is to characterize the fracture calcite using mineralogy, oxygen, carbon and strontium isotopes, and fluid inclusions in order to determine past and present chemical and isotopic condition at the site

An isotopic and fluid inclusion study of fracture calcite from borehole OL-KR1 at the Olkiluoto site, Finland

Energy Technology Data Exchange (ETDEWEB)

Blyth, A.; Frape, S. [Univ. of Waterloo, ON (Canada); Blomqvist, R.; Nissinen, P. [Geological Survey of Finland, Espoo (Finland); McNutt, R. [McMaster Univ. of Hamilton, ON (Canada)

1998-04-01

A study of the geochemistry of fracture filling calcite in borehole OL-KR1 at the radioactive waste disposal investigation site Olkiluoto (in Finland) was undertaken in 1998. The purpose of the present study is to characterize the fracture calcite using mineralogy, oxygen, carbon and strontium isotopes, and fluid inclusions in order to determine past and present chemical and isotopic condition at the site 39 refs.

The Vein-type Zn-(Pb, Cu, As, Hg) mineralization at Fedj Hassene ore field, North-Western Tunisia: Mineralogy, Trace Elements, Sulfur Isotopes and Fluid Inclusions; Le champ filonien a Zn-(Pb, Cu, As, Hg) du district minier de Fedj Hassene (Nord Ouest de la Tunisie): Mineralogie, Elements en traces, Isotopes du Soufre et Inclusions Fluides

Energy Technology Data Exchange (ETDEWEB)

Bejaouil, J.; Bouhlel, S.; Barca, D.; Braham, A.

2011-07-01

The Fedj Hassene district is localized at the edge of the Tuniso-Algerian border 10 km of Ghardimaou area. It consists of a Zn-Pb vein type with minor amounts of Cu-As-Hg. The total Zn reserves are about 370.000t. The mineralization occurs within sub parallel fractures to the Ain El Kohla ESE-WNW fault. Host rocks consist of limestones and marly limestones of the Middle Turonian. In the principal lode of Fedj Hassene, the mineralization occurs as vein filling of massive and brecciated brown sphalerite and minor galena ore with gangue. Other trace minerals are pyrite, chalcopyrite, orpiment, realgar, smithsonite and cerussite. LA-ICP-MS analyses in sphalerites show mean contents of 0,84 wt% Fe, 0,14 wt% Cd and 0,02 wt% Mn Ore. Fluid inclusions study in calcite and sphalerite reveals one mineralizing fluid characterized by an average salinity 23% wt NaCl with decreasing homogenisation temperature. In fact the temperature shows decrease from sphalerite to calcite. The fluid density that corresponds to trapping pressure ranges between 1.00 g/cm{sup 3} and 1.11 g/cm{sup 3} and pressure close to 200 bars. Micro thermometric data in fluid inclusion hosted by gangue mineral presented by calcite show an average temperature of formation around 194 degree centigrade. These inclusions homogenized to the liquid phase between 156 degree centigrade and 210 degree centigrade and salinities values ranging from 22 to 28 wt% NaCl and an average around 23% wt NaCl. The {delta}{sup 3}4S (VCDT) values of sphalerite are in the range of + 4,6% to 6,4% (average=5,6%). Thermochemical reduction of Triassic sulfate by reaction with hydro-carbons is the most probable source for the heavy and the narrow range of the d{delta}{sup 3}4S values. Mineralogical, geochemical of trace elements, fluid inclusions and sulfur isotopes studies allow to include the vein-type ore field of Fedj Hassene in the polymetallic (Pb-Zn-As-Hg) vein mineralization of the nappe zone in northern Tunisia and north eastern

Raman spectroscopic measurements of CO2 density: Experimental calibration with high-pressure optical cell (HPOC) and fused silica capillary capsule (FSCC) with application to fluid inclusion observations

Science.gov (United States)

Wang, X.; Chou, I-Ming; Hu, W.; Burruss, Robert; Sun, Q.; Song, Y.

2011-01-01

Raman spectroscopy is a powerful method for the determination of CO2 densities in fluid inclusions, especially for those with small size and/or low fluid density. The relationship between CO2 Fermi diad split (Δ, cm−1) and CO2 density (ρ, g/cm3) has been documented by several previous studies. However, significant discrepancies exist among these studies mainly because of inconsistent calibration procedures and lack of measurements for CO2fluids having densities between 0.21 and 0.75 g/cm3, where liquid and vapor phases coexist near room temperature.In this study, a high-pressure optical cell and fused silica capillary capsules were used to prepare pure CO2 samples with densities between 0.0472 and 1.0060 g/cm3. The measured CO2 Fermi diad splits were calibrated with two well established Raman bands of benzonitrile at 1192.6 and 1598.9 cm−1. The relationship between the CO2 Fermi diad split and density can be represented by: ρ = 47513.64243 − 1374.824414 × Δ + 13.25586152 × Δ2 − 0.04258891551 × Δ3(r2 = 0.99835, σ = 0.0253 g/cm3), and this relationship was tested by synthetic fluid inclusions and natural CO2-rich fluid inclusions. The effects of temperature and the presence of H2O and CH4 on this relationship were also examined.

[Traditional and Complementary Medicine in Brazil: inclusion in the Brazilian Unified National Health System and integration with primary care].

Science.gov (United States)

Sousa, Islandia Maria Carvalho de; Tesser, Charles Dalcanale

2017-01-23

This study aimed to analyze the inclusion of Traditional and Complementary Medicine in Brazilian Unified National Health System (SUS) and its integration with primary healthcare (PHC). A qualitative study drew on institutional data, indexed articles, and case studies in selected Brazilian cities: Campinas (São Paulo State), Florianópolis (Santa Catarina State), Recife (Pernambuco State), Rio de Janeiro, and São Paulo. The analysis adopted the perspective of inclusion of Traditional and Complementary Medicine in the healthcare network and its integration with primary healthcare, based on the following dimensions: presence of Traditional and Complementary Medicine on the municipal agenda; position in the services; mode of access to Traditional and Complementary Medicine; Traditional and Complementary Medicine practitioners; types of practices; demand profile; and potential for expansion in the SUS. The authors identified and characterized four types of inclusion and integration of Traditional and Complementary Medicine, whether in association or not: Type 1 - in primary healthcare via professionals from the family health teams - Integrated; Type 2 - in primary healthcare via professionals with full-time employment - Juxtaposed; Type 3 - in primary healthcare via matrix-organized teams - Matrix Organization; Type 4 - in specialized services - Without Integration. The combination of types 1 and 3 was considered a potential guideline for the expansion of Traditional and Complementary Medicine in the SUS and can orient the growth and integration of Traditional and Complementary Medicine with primary healthcare. The growing presence of Traditional and Complementary Medicine in the SUS requires conceiving its strategic expansion, while existing experiences should not be wasted.

Fluid inclusion study of the Cachoeira uranium deposit, Caetite, state of Bahia, Brazil

International Nuclear Information System (INIS)

Alves, J.V.; Fuzikawa, K.

1984-01-01

The Cachoeira uranium deposit is presently the richest deposit among those in the Lagoa Real Uranium Province. The mineralization is associated to the albitites formed during the onset of strong sodium metasomatism on the granite-gnaissic rocks of the area. Fluid inclusion study of several uraniferous albitites indicated the presence of strong brines (approx. 20 weight percent NaCl equivalent) and the dominance of hydrocarbons over CO 2 in the gas phase. In country rocks, which host the albitites, as well as in unmineralized albities the salinity of aqueous solution is variable and light hydrocarbons are the predominant gas phase. These data were obtained by microthermometry and crushing tests from a larger set of samples than that used in previous studies. However, the results do not differ significantly from the data of these earlier works and reinforce the hypothesis of the importance of CH 4 in Uo 2 precipitation. (Author) [pt

Study of REE behaviors, fluid inclusions, and O, S stable Isotopes in Zafar-abad iron skarn deposit, NW Divandarreh, Kordestan province

Directory of Open Access Journals (Sweden)

Mehrdad Barati

2014-10-01

Full Text Available Introduction The Zafar-abad iron ore deposit, situated in the NW part of Divandarreh (lat. 36°01'14" and long. 46°58'22". The ore body is located on the northern margin of the Sanandaj-Sirjan igneous metamorphic zone. The Zafar-abad Fe-skarn deposit is one of the important, medium- size mineral deposits in western Iran. REE patterns of skarn magnetite were among others studied in Skarn deposit by (Taylor, 1979 Hydrothermal alteration and fluid-rock interaction significantly affect total contents of REE and their patterns in fluids. Moreover, fractionation of REE by chemical complication, adsorption effects and redox reactions are characteristic processes determining REE behavior during crystallization. Stable isotope data for oxygen and sulfur have been widely used with great success to trace the origin and evolution history of paleo-hydrothermal fluids of meteoric, magmatic, and metamorphic. Materials and methods The present study investigates REE and stable Isotope geochemistry of magnetite and pyrite in Zafar-abad deposit and temperature of trapped fluid inclusions based on geothermometry analysis. In order to study the major, trace and REE compositions of Zafar-abad magnetite, twelve samples were collected from surface of ore exposures. The emphasis during sampling was on ores with primary textures. Discussion The Zafar-abad district is situated in Mesozoic and Cenozoic sedimentary, meta-sedimentary and meta-igneous rocks in Sanandaj-Sirjan igneous metamorphic zone. Sedimentary sequences dominantly composed of calcareous and conglomerate rocks. Various meta-sedimentary rocks are intercalated with the sedimentary rocks, and comprise biotite and muscovite-rich schist, calc-schist, calc-silicate rock. Several distinct ductile tectonic fabrics have been identified around the Zafar-abad deposit. The main ore body at Zafar-abad is in the form of a roughly horizontal, discordant, lens to tabular-shaped body plunging 10° NW, where it appears to

Fluid inclusion and oxygen isotope studies of the Nabarlek and Jabiluka uranium deposits, Northern Territory, Australia

International Nuclear Information System (INIS)

Ypma, P.J.M.; Fuzikawa, K.

1980-01-01

We lack a basic understanding of the solutions producing the uranium deposits of the Alligator Rivers Uranium Field (ARUF). Several theories have been proposed ranging from syngenetic, epigenetic hydrothermal, epigenetic metamorphogenic, surficial origin (Ferguson et al., this volume), and mobilization by evaporite deposits. As for a precipitation mechanism, we do not seem to find much beyond the presence of graphite in some ore-bearing and intra-formational strata, and pre-uranium sulphides, none of which reducing factors are common throughout all ore bodies. This study was initiated with the aim of obtaining direct fluid inclusion evidence of the solution transport and precipitation of uranium

Footstep towards Inclusive Education

Science.gov (United States)

Abbas, Faiza; Zafar, Aneeka; Naz, Tayyaba

2016-01-01

Inclusive education is a rising trend in the world. The first step towards inclusive education is providing the awareness to the general education teachers. This study focused to investigate the general education teachers of primary and secondary level awareness about the special education and inclusive education. This study is descriptive method…

Fluid evolution and ore genesis of the Dalingshang deposit, Dahutang W-Cu ore field, northern Jiangxi Province, South China

Science.gov (United States)

Peng, Ning-Jun; Jiang, Shao-Yong; Xiong, Suo-Fei; Pi, Dao-Hui

2018-02-01

The Dalingshang W-Cu deposit is located in the North section of the Dahutang ore field, northern Jiangxi Province, South China. Vein- and breccia-style tungsten-copper mineralization is genetically associated with Mesozoic S-type granitic rocks. Infrared and conventional microthermometric studies of both gangue and ore minerals show that the homogenization temperatures for primary fluid inclusions in wolframite ( 340 °C) are similar to those in scheelite ( 330 °C), but about 40 °C higher than those of apatite ( 300 °C) and generally 70 °C higher than those in coexisting quartz ( 270 °C). Laser Raman analysis identifies CH4 and N2 without CO2 in fluid inclusions in scheelite and coexisting quartz, while fluid inclusions in quartz of the sulfide stage have variable CO2 content. The ore-forming fluids overall are characterized by high- to medium-temperature, low-salinity, CH4, N2, and/or CO2-bearing aqueous fluids. Chalcopyrite, muscovite, and sphalerite are the most abundant solids recognized in fluid inclusions from different ores. The H-O-S-Pb isotope compositions favor a dominantly magmatic origin for ores and fluids, while some depleted δ34S values (- 14.4 to - 0.9‰) of sulfides from the sulfide stage are most likely produced by an increase of oxygen fugacity, possibly caused by inflow of oxidized meteoric waters. The microthermometric data also indicate that a simple cooling process formed early scheelite and wolframite. However, increasing involvement of meteoric waters and fluid mixing may trigger a successive deposition of base metal sulfides. Fluid-rock interaction was critical for scheelite mineralization as indicated by in-situ LA-ICP-MS analysis of trace elements in scheelite.

Fluid Evolution During Mineralization of Atashkuh Fluorite-Barite (±Sulfide Deposit, South of Delijan

Directory of Open Access Journals (Sweden)

Seyed Javad Moghaddasi

2016-07-01

Full Text Available Introduction More than 30 fluorite occurrences with approximately 1.35 million tons of reserves have been recognized in Iran (Ghorbani, 2013. The Atashkuh fluorite-barite (±sulfide deposit is one of four occurrences located south of the city of Delijan in Markazi province, about 80 km SE of Arak city. The Atashkuh deposit occurs between the central Iran structural zone on the north and the Sanandaj-Sirjan structural zone on the south. The geology of the area is dominated by folded and faulted Jurassic carbonates and shales (Thiele et al., 1968. The lower Jurassic shale and calcareous sandstone of the Shemshak Formation and the Middle to Upper Jurassic dolomite of the Badamu Formation are the main host rocks for the fluorite veins. In this study, 40 samples from fluorite veins and host rocks were collected, from which 25 thin sections and 8 doubly-polished thin sections were prepared. Micro-thermometric studies were conducted on primary fluid inclusions using the Linkam THM600 heating-freezing stage. In addition, 10 samples were analyzed by XRD. Results Fluid inclusion data indicate that the Atashkuh fluorite-barite (±sulfides veins were deposited as a result of mixing a primary multi-component Na-K(-Mg-Ca high-salinity brine (SH type inclusions with less saline calcium-rich connate water (LVHH type inclusions and pressure reduction of ore bearing fluids. Fluid inclusions containing halite in high-salinity brine, and hydrohalite in connate water show suggest a high-salinity brine and connate water before mixing. The main mineralization stage was followed by circulation of low temperature meteoric water, responsible for the late stage mineralization. The micro-thermometry results suggest that the main fluorite mineralization occurred at 250 °C and 150 Mpa pressure. Dolomitization and silicification are the main alteration types associated with the Atashkuh mineralization. The occurrence of chlorite, talc, illite and dolomitized host rock all

Isotope geochemistry of fluid inclusions in Permian halite with implications for the isotopic history of ocean water and the origin of saline formation waters

International Nuclear Information System (INIS)

Knauth, L.P.; Beeunas, M.A.

1986-01-01

deltaD and delta 18 O values have been determined for fluid inclusions in 45 samples of Permian halite. The inclusions are enriched in 18 O relative to the meteoric water line but are depleted in D relative to ocean water. Inclusions with the more positive delta-values coincide with the isotopic compositions expected for evaporating sea water which follows a hooked trajectory on a deltaD-delta 18 O diagram. Inclusions with more negative delta-values may represent more highly evaporated sea water but probably reflect synsedimentary or diagenetic mixing to those of a modern evaporite pan to indicate that Permian sea water was isotopically similar to modern sea water. Connate evaporite brines can have negative delta-values because of the probable hooked isotope trajectory of evaporating sea water and/or synsedimentary mixing of evaporite brines with meteoric waters. (author)

Metal-rich fluid inclusions provide new insights into unconformity-related U deposits (Athabasca Basin and Basement, Canada)

Science.gov (United States)

Richard, Antonin; Cathelineau, Michel; Boiron, Marie-Christine; Mercadier, Julien; Banks, David A.; Cuney, Michel

2016-02-01

The Paleoproterozoic Athabasca Basin (Canada) hosts numerous giant unconformity-related uranium deposits. The scope of this study is to establish the pressure, temperature, and composition (P-T-X conditions) of the brines that circulated at the base of the Athabasca Basin and in its crystalline basement before, during and after UO2 deposition. These brines are commonly sampled as fluid inclusions in quartz- and dolomite-cementing veins and breccias associated with alteration and U mineralization. Microthermometry and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) data from five deposits (Rabbit Lake, P-Patch, Eagle Point, Millennium, and Shea Creek) complement previously published data for the McArthur River deposit. In all of the deposits investigated, fluid inclusion salinity is between 25 and 40 wt.% NaCl equiv., with compositions displaying a continuum between a "NaCl-rich brine" end-member (Cl > Na > Ca > Mg > K) and a "CaCl2-rich brine" end-member (Cl > Ca ≈ Mg > Na > K). The CaCl2-rich brine has the highest salinity and shows evidence for halite saturation at the time of trapping. The continuum of compositions between the NaCl-rich brine and the CaCl2-rich brine end-members combined with P-T reconstructions suggest anisothermal mixing of the two brines (NaCl-rich brine, 180 ± 30 °C and 800 ± 400 bars; CaCl2-rich brine, 120 ± 30 °C and 600 ± 300 bars) that occurred under fluctuating pressure conditions (hydrostatic to supra-hydrostatic). However, because the two brines were U bearing and therefore oxidized, brine mixing was probably not the driving force for UO2 deposition. Several scenarios are put forward to account for the Cl-Na-Ca-Mg-K composition of the brines, involving combinations of seawater evaporation, halite dissolution, mixing with a halite-dissolution brine, Mg/Ca exchange by dolomitization, Na/Ca exchange by albitization of plagioclase, Na/K exchange by albitization of K-feldspar, and Mg loss by Mg

Systematic sulfur stable isotope and fluid inclusion studies on veinlet groups in the Sarcheshmeh porphyry copper deposit: based on new data

Directory of Open Access Journals (Sweden)

Mohammad Maanijou

2012-10-01

Full Text Available Mineralization occurred by intrusion of granodioritic stock of middle Miocene in volcano–sedimenrary rocks in Sarcheshmeh of early Tertiary age. This research is based on samples of new drilled boreholes and benches of 2500m elevation. Based on mineralogy and crosscutting relationships, at least four groups of veinlets pertaining to four stages of mineralization were recognized. Sulfur isotope studies in the Sarcheshmeh porphyry copper deposit were conducted on pyrite, chalcopyrite, molybdenite and anhydrites of four groups of veinlets. The δ34S values in the sulfides and sulfates range from -2.2 to 1.27‰ and from 10.2 to 14.5 ‰, respectively. The average δ34S value in the sulfides is 1‰ and that for the sulfates is about 13‰. Considering these results, it can be concluded that the sulfides made up of a fluid that its sulfur has a magmatic origin. Also, fluid inclusions of different veinlet groups were studied, showing high temperature, high salinity and the occurrence of boiling in the mineralizing fluids. Moreover, these studies indicate presence of three types of fluids including magmatic, meteoritic and mixture of these two fluids in alteration and mineralizion processes.

Brine history indicated by argon, krypton, chlorine, bromine, and iodine analyses of fluid inclusions from the Mississippi Valley type lead-fluorite-barite deposits at Hansonburg, New Mexico

Science.gov (United States)

Böhlke, J.K.; Irwin, J.J.

1992-01-01

Argon, krypton, chlorine, bromine, and iodine were measured in a homogeneous population of high-salinity hydrothermal fluid inclusions from the Tertiary-age Mississippi Valley-type (MVT) lead-fluorite-barite deposits at Hansonburg, New Mexico to establish new types of evidence for the history of both the fluid and the major dissolved salts. Noble gases and halogens in fluid inclusions containing 10−10–10−9 L of brine (Cl= 3 molal) were analyzed by laser microprobe noble-gas mass spectrometry (lmngms) on neutron-irradiated samples.The concentrations of36Ar (4.7 × 10−8 molal) and84Kr1.8 × 10−9 molal) in the fluid inclusions are equal to those of fresh surface waters in equilibrium with air at approximately20 ± 5°. The mole ratios ofBr/Cl (1.2 × 10−4) andI/Cl (1–2 × 10−6) are among the lowest measured in any natural waters, similar to those of modern brines formed by dissolution of Permian NaCl-bearing evaporites in southeast New Mexico.40Ar/36Ar ratios (600) are twice that of air, and indicate that the fluid inclusions had excess radiogenic40Ar (1.4 × 10−5 molal) when trapped. The amount of excess40Ar appears to be too large to have been acquired with Cl by congruent dissolution of halite-bearing evaporites, and possibly too small to have been acquired with Pb by congruent dissolution of granitic basement rocks with Proterozoic KAr ages.From thelmngms data, combined with published Pb and S isotope data, we infer the following sequence of events in the history of the Hansonburg MVT hydrothermal brine: (1) the brine originated as relatively dilute meteoric water, and it did not gain or lose atmospheric Ar or Kr after recharge; (2) the originally dilute fluid acquired the bulk of its Cl and sulfate in the subsurface after recharge by dissolving halite-bearing Permian? marine evaporites; (3) the high salinity brine then acquired most of its Pb and excess radiogenic40Ar from interactions with aquifer rocks other than evaporites, possibly clastic

Origin of the Okrouhlá Radouň episyenite-hosted uranium deposit, Bohemian Massif, Czech Republic: fluid inclusion and stable isotope constraints

Science.gov (United States)

Dolníček, Zdeněk; René, Miloš; Hermannová, Sylvie; Prochaska, Walter

2014-04-01

The Okrouhlá Radouň shear zone hosted uranium deposit is developed along the contact of Variscan granites and high-grade metasedimentary rocks of the Moldanubian Zone of the Bohemian Massif. The pre-ore pervasive alteration of wall rocks is characterized by chloritization of mafic minerals, followed by albitization of feldspars and dissolution of quartz giving rise to episyenites. The subsequent fluid circulation led to precipitation of disseminated uraninite and coffinite, and later on, post-ore quartz and carbonate mineralization containing base metal sulfides. The fluid inclusion and stable isotope data suggest low homogenization temperatures (˜50-140 °C during pre-ore albitization and post-ore carbonatization, up to 230 °C during pre-ore chloritization), variable fluid salinities (0-25 wt.% NaCl eq.), low fluid δ18O values (-10 to +2 ‰ V-SMOW), low fluid δ13C values (-9 to -15 ‰ V-PDB), and highly variable ionic composition of the aqueous fluids (especially Na/Ca, Br/Cl, I/Cl, SO4/Cl, NO3/Cl ratios). The available data suggest participation of three fluid endmembers of primarily surficial origin during alteration and mineralization at the deposit: (1) local meteoric water, (2) Na-Ca-Cl basinal brines or shield brines, (3) SO4-NO3-Cl-(H)CO3 playa-like fluids. Pre-ore albitization was caused by circulation of alkaline, oxidized, and Na-rich playa fluids, whereas basinal/shield brines and meteoric water were more important during the post-ore stage of alteration.

Inclusive education: Ideas vs reality

Directory of Open Access Journals (Sweden)

Jovanović-Popadić Ana M.

2016-01-01

Full Text Available This paper discusses some of the key factors significant for the process of implementation of inclusive education in Serbia. After a brief review of the legal provisions regulating inclusive education in our country, the results of the research of attitudes towards inclusive education of teachers from six primary schools and one school for students with disabilities, as well as their experience, competencies, working conditions and opinions on consequences of inclusive education and education of children with developmental disabilities in specialized educational institutions are shown. Research was conducted in Krusevac, on a random sample of 60 teachers (51 teachers from primary schools and 9 special education teachers from schools for students with disabilities. We used two forms of questionnaires with twenty questions, and the results show predominantly negative attitudes towards inclusion in the majority of teachers in the sample. A significant percentage of respondents in both sub-samples considered that education of children with developmental disorders in specialized institutions (schools may give better results, primarily due to a lack of systematic support to teachers of primary schools in the process of implementing educational inclusion. The conclusion provides a critical overview of the current situation and presents the potential solutions to the problems that were identified during the research, and refer to the unsustainability of the current practice of inclusive education in Serbia.

Upper mantle fluids evolution, diamond formation, and mantle metasomatism

Science.gov (United States)

Huang, F.; Sverjensky, D. A.

2017-12-01

During mantle metasomatism, fluid-rock interactions in the mantle modify wall-rock compositions. Previous studies usually either investigated mineral compositions in xenoliths and xenocrysts brought up by magmas, or examined fluid compositions preserved in fluid inclusions in diamonds. However, a key study of Panda diamonds analysed both mineral and fluid inclusions in the diamonds [1] which we used to develop a quantitative characterization of mantle metasomatic processes. In the present study, we used an extended Deep Earth Water model [2] to simulate fluid-rock interactions at upper mantle conditions, and examine the fluids and mineral assemblages together simultaneously. Three types of end-member fluids in the Panda diamond fluid inclusions include saline, rich in Na+K+Cl; silicic, rich in Si+Al; and carbonatitic, rich in Ca+Mg+Fe [1, 3]. We used the carbonatitic end-member to represent fluid from a subducting slab reacting with an excess of peridotite + some saline fluid in the host environment. During simultaneous fluid mixing and reaction with the host rock, the logfO2 increased by about 1.6 units, and the pH increased by 0.7 units. The final minerals were olivine, garnet and diamond. The Mg# of olivine decreased from 0.92 to 0.85. Garnet precipitated at an early stage, and its Mg# also decreased with reaction progress, in agreement with the solid inclusions in the Panda diamonds. Phlogopite precipitated as an intermediate mineral and then disappeared. The aqueous Ca, Mg, Fe, Si and Al concentrations all increased, while Na, K, and Cl concentrations decreased during the reaction, consistent with trends in the fluid inclusion compositions. Our study demonstrates that fluids coming from subducting slabs could trigger mantle metasomatism, influence the compositions of sub-lithospherc cratonic mantle, precipitate diamonds, and change the oxygen fugacity and pH of the upper mantle fluids. [1] Tomlinson et al. EPSL (2006); [2] Sverjensky, DA et al., GCA (2014

Teachers' knowledge, attitude and practices of inclusive education ...

African Journals Online (AJOL)

This study was conducted to investigate teachers' knowledge, attitude, and practices of inclusive education in Nekemte town and its surrounding government primary schools; and how their knowledge and attitude towards inclusion affect the practice of inclusive education. The participants of the study were primary school ...

Hydrothermal Evolution of the Giant Cenozoic Kadjaran porphyry Cu-Mo deposit, Tethyan metallogenic belt, Armenia, Lesser Caucasus: mineral paragenetic, cathodoluminescence and fluid inclusion constraints

Science.gov (United States)

Hovakimyan, Samvel; Moritz, Robert; Tayan, Rodrik; Rezeau, Hervé

2016-04-01

stockwork. One of them is the east-west-oriented 6th vein zone in the northern part of the deposit, which contains quartz-molybdenite veins and late quartz-galena-sphalerite veins. This is interpreted as a telescoping between porphyry and epithermal environments. It is supported by microscopic studies of mineral paragenesis, which reveal the presence of enargite and tennantite-tetrahedrite, luzonite, sphalerite, and galena, generally in a gangue of quartz, followed by a late carbonate and gypsum stage. On-going fluid inclusion studies are being carried out on quartz samples from the different mineralization stages. Five types of fluid inclusions were distinguished according to their nature, bubble size, and daughter mineral content: vapor-rich, aqueous-carbonic, brine, polyphase brine and liquid-rich inclusions. Cathodoluminescence images from the porphyry veins reveal four generations of quartz. Molybdenite and chalcopyrite are associated with two different dark luminescent quartz generations, which contain typical brine, aqueous-carbonic and vapour-rich H2O fluid inclusions, with some of them coexisting locally as boiling assemblages. Epithermal veins are mainly characterized by liquid-rich H2O fluid inclusions. Microthermometric studies of fluid inclusions reveal a major difference in homogenisation temperatures between the early quartz-molybdenite- chalcopyrite stage (Thtotal between 3600 and 4250C) and the late quartz-galena-sphalerite vein stage (Thtotal 300-2700C), which is attributed to the transition from a porphyry to an epithermal environment in the Kadjaran deposit.

Approaching Inclusion as Social Practice: Processes of Inclusion and Exclusion

DEFF Research Database (Denmark)

Molbæk, Mette; Hansen, Janne Hedegaard; Lassen, Mikkel

2018-01-01

The article presents the results of a review of international research investigating mechanisms and processes of inclusion and exclusion as an ongoing part of social practice in a school context. The review forms part of a research project investigating the social practices of inclusive education...... in primary and lower-secondary education (age 6–16) in public schools as constituted by processes of inclusion and exclusion. The project aims to shift the scientific focus of research in inclusive education from the development of pedagogical and didactic practice to the importance of community construction...... through inclusion and exclusion processes. The project arises in context of Danish education policy, while the review looked for international research findings on the limits between inclusion and exclusion: how they are drawn, by whom, for what reasons, and for whose benefit? On the background...

Fluids in metamorphic rocks

NARCIS (Netherlands)

Touret, J.L.R.

2001-01-01

Basic principles for the study of fluid inclusions in metamorphic rocks are reviewed and illustrated. A major problem relates to the number of inclusions, possibly formed on a wide range of P-T conditions, having also suffered, in most cases, extensive changes after initial trapping. The

Inclusions and Exclusions in Rural Tanzanian Primary Schools: Material Barriers, Teacher Agency and Disability Equality

Directory of Open Access Journals (Sweden)

Susie Miles

2018-03-01

Full Text Available This article begins with the assumption that the argument for the inclusion of children with disabilities in mainstream schools, championed by Sustainable Development Goal 4 and Article 24 of the UN Convention on the Rights of Persons with Disabilities, has largely been accepted nationally and internationally by policy makers, and is increasingly being accepted by teachers. In interrogating the complex craft of developing inclusive and equal learning environments for children with disabilities, this article draws upon Kershner’s ‘core aspects of teachers’ knowledge and knowing’, and in particular, ‘the school as a site for the development of teaching expertise and the creation of knowledge’. Data is presented from in-depth interviews following videoed lesson observations with experienced teachers in 15 rural, urban and coastal primary schools in four districts in Tanzania. Findings indicate that the teachers’ practice is moving unevenly towards disability equality, and involves processes of inclusions and exclusions. This involves teacher autonomy, agency and reflective practice in the context of material, attitudinal, structural, pedagogic and curricular barriers. The teachers’ expertise has potential to inform national and international policy developments, and so reduce the evident rhetoric-reality gap. In conclusion, it is argued that inclusive education needs to grapple with disability as a social construct, and lessons are drawn for the further fulfilment of the rights of children with disabilities to equal participation in education.

The search for and analysis of direct samples of early Solar System aqueous fluids.

Science.gov (United States)

Zolensky, Michael E; Bodnar, Robert J; Yurimoto, Hisayoshi; Itoh, Shoichi; Fries, Marc; Steele, Andrew; Chan, Queenie H-S; Tsuchiyama, Akira; Kebukawa, Yoko; Ito, Motoo

2017-05-28

We describe the current state of the search for direct, surviving samples of early, inner Solar System fluids-fluid inclusions in meteorites. Meteoritic aqueous fluid inclusions are not rare, but they are very tiny and their characterization is at the state of the art for most analytical techniques. Meteoritic fluid inclusions offer us a unique opportunity to study early Solar System brines in the laboratory. Inclusion-by-inclusion analyses of the trapped fluids in carefully selected samples will, in the immediate future, provide us detailed information on the evolution of fluids as they interacted with anhydrous solid materials. Thus, real data can replace calculated fluid compositions in thermochemical calculations of the evolution of water and aqueous reactions in comets, asteroids, moons and the terrestrial planets.This article is part of the themed issue 'The origin, history and role of water in the evolution of the inner Solar System'. © 2017 The Author(s).

USAGE OF SELECTED RESOURCES FOR INCLUSIVE EDUCATION IN MAINSTREAM PRIMARY SCHOOLS: ISSUES AND CHALLENGES FROM A KENYAN PERSPECTIVE

Directory of Open Access Journals (Sweden)

Pamela Buhere

2013-12-01

Full Text Available This study assessed the effectiveness of the use of selected teaching/learning resources in the implementation of Inclusive Education (I.E for Special Needs Education (SNE learners in mainstream primary schools. Focusing on the organisational effectiveness of the school management in meeting the needs of Special needs Learners, research questions explored the following: the availability of the selected teaching/learning resources, effectiveness of the use of available teaching /learning for Inclusive Education, challenges in the use of available teaching/learning resources and possible improvements with regard to the implementation of Inclusive Education for Special Needs Learners in mainstream primary schools. The study adopted a descriptive survey design. Out of 150 schools that had integrated Special Needs Learners in Bungoma Count, Kenya, 20% were stratified, proportionately and randomly sampled. Purposive sampling was used to obtain the participants; head teachers, regular, and special teachers. The sample comprised of 30 head teachers, 120 regular teachers and 8 special teachers (total 158. Data were collected using questionnaires for 30 head teachers, 120 regular teachers, interview schedules for 8 special teachers and observation schedule. Data was analyzed using descriptive statistics. The study findings reveal that the integration of inclusive education has not been accompanied by support structures; educators lack the knowledge in handling the available resources, the available learning resources are inadequate and inappropriate. The study recommends that Ministry of education and school managers can implement inclusion smoothly and effectively through a variety of vehicles including in-service opportunities, professional support groups, mentoring activities, monitoring the degree of collaboration between general and special educators and improving the school setting to accommodate learner diversity. In addition, the government should

Percolation of diagenetic fluids in the Archaean basement of the Franceville basin

Science.gov (United States)

Mouélé, Idalina Moubiya; Dudoignon, Patrick; Albani, Abderrazak El; Cuney, Michel; Boiron, Marie-Christine; Gauthier-Lafaye, François

2014-01-01

The Palaeoproterozoic Franceville basin, Gabon, is mainly known for its high-grade uranium deposits, which are the only ones known to act as natural nuclear fission reactors. Previous work in the Kiéné region investigated the nature of the fluids responsible for these natural nuclear reactors. The present work focuses on the top of the Archaean granitic basement, specifically, to identify and date the successive alteration events that affected this basement just below the unconformity separating it from the Palaeoproterozoic basin. Core from four drill holes crosscutting the basin-basement unconformity have been studied. Dating is based on U-Pb isotopic analyses performed on monazite. The origin of fluids is discussed from the study of fluid inclusion planes (FIP) in quartz from basement granitoids. From the deepest part of the drill holes to the unconformable boundary with the basin, propylitic alteration assemblages are progressively replaced by illite and locally by a phengite + Fe chlorite ± Fe oxide assemblage. Illitic alteration is particularly strong along the sediment-granitoid contact and is associated with quartz dissolution. It was followed by calcite and anhydrite precipitation as fracture fillings. U-Pb isotopic dating outlines three successive events: a 3.0-2.9-Ga primary magmatic event, a 2.6-Ga propylitic alteration and a late 1.9-Ga diagenetic event. Fluid inclusion microthermometry suggests the circulation of three types of fluids: (1) a Na-Ca-rich diagenetic brine, (2) a moderately saline (diagenetic + meteoric) fluid, and (3) a low-salinity fluid of probable meteoric origin. These fluids are similar to those previously identified within the overlying sedimentary rocks of the Franceville basin. Overall, the data collected in this study show that the Proterozoic-Archaean unconformity has operated as a major flow corridor for fluids circulation, around 1.9 Ga. highly saline diagenetic brines; hydrocarbon-rich fluids derived from organic matter

Below-surface analysis of inclusions with PIXE and PIGE

International Nuclear Information System (INIS)

MacArthur, J.D.; Ma, X.P.; Palmer, G.R.; Anderson, A.J.; Clark, A.H.

1990-01-01

The composition of fluid inclusions in host minerals holds much information about the chemical environment of mineral formation. When solid inclusions are exposed through polishing, their content can readily be investigated with an electron or proton probe. However, with an electron probe, only the daughter minerals or the residue material left when a fluid inclusion is opened can be analyzed since electrons with energies of tens of keV cannot penetrate to the unexposed inclusion. On the other hand, proton beams of a few MeV can penetrate a few tens of μm of material and still be able to excite characteristic radiation. This phenomenon has been exploited for the analysis of subsurface inclusions. Ideally, standard petrographic sections are polished to that inclusions, targetted for analysis, are brought to within 10 μm of the surface. The overlying matrix reduces the sensitivity of PIXE for the elements of low Z such as Na and Al because of the attenuation of the X-rays. However, these elements, as well as elements of even lower Z, which cannot be analyzed with the electron probe, can readily be detected with PIGE at good sensitivity. (orig.)

Exploration of the phase diagram of liquid water in the low-temperature metastable region using synthetic fluid inclusions

DEFF Research Database (Denmark)

Qiu, Chen; Krüger, Yves; Wilke, Max

2016-01-01

water with a density of 0.921 kg/m3 remains in a homogeneous state during cooling down to the temperaure of −30.5 °C, where it is transformed into ice whose density corresponds to zero pressure. iii) ice melting. Ice melting temperatures of up to 6.8 °C were measured in absence of the vapour bubble, i......We present new experimental data of the low-temperature metastable region of liquid water derived from high-density synthetic fluid inclusions (996−916 kg/m3) in quartz. Microthermometric measurements include: i) Prograde (upon heating) and retrograde (upon cooling) liquid-vapour homogenisation. We...

The primary cilium as sensor of fluid flow: new building blocks to the model

DEFF Research Database (Denmark)

Prætorius, Helle

2015-01-01

functionally as an organelle that makes cells more susceptible to changes in fluid flow. Thus the primary cilium was suggested to function as a flow-sensing device. This characterization has been substantiated for many epithelial cell types over the years. Nevertheless, part of the central mechanism of signal...

Solid-state flurbiprofen and methyl-β-cyclodextrin inclusion complexes prepared using a single-step, organic solvent-free supercritical fluid process.

Science.gov (United States)

Rudrangi, Shashi Ravi Suman; Kaialy, Waseem; Ghori, Muhammad U; Trivedi, Vivek; Snowden, Martin J; Alexander, Bruce David

2016-07-01

The aim of this study was to enhance the apparent solubility and dissolution properties of flurbiprofen through inclusion complexation with cyclodextrins. Especially, the efficacy of supercritical fluid technology as a preparative technique for the preparation of flurbiprofen-methyl-β-cyclodextrin inclusion complexes was evaluated. The complexes were prepared by supercritical carbon dioxide processing and were evaluated by solubility, differential scanning calorimetry, X-ray powder diffraction, scanning electron microscopy, practical yield, drug content estimation and in vitro dissolution studies. Computational molecular docking studies were conducted to study the possibility of molecular arrangement of inclusion complexes between flurbiprofen and methyl-β-cyclodextrin. The studies support the formation of stable molecular inclusion complexes between the drug and cyclodextrin in a 1:1 stoichiometry. In vitro dissolution studies showed that the dissolution properties of flurbiprofen were significantly enhanced by the binary mixtures prepared by supercritical carbon dioxide processing. The amount of flurbiprofen dissolved into solution alone was very low with 1.11±0.09% dissolving at the end of 60min, while the binary mixtures processed by supercritical carbon dioxide at 45°C and 200bar released 99.39±2.34% of the drug at the end of 30min. All the binary mixtures processed by supercritical carbon dioxide at 45°C exhibited a drug release of more than 80% within the first 10min irrespective of the pressure employed. The study demonstrated the single step, organic solvent-free supercritical carbon dioxide process as a promising approach for the preparation of inclusion complexes between flurbiprofen and methyl-β-cyclodextrin in solid-state. Copyright © 2016 Elsevier B.V. All rights reserved.

Cathodoluminescence, fluid inclusions and trace element data for the syntaxial quartz cementation in the sandstones of Ora Formation, northern Iraq

DEFF Research Database (Denmark)

Omer, Muhamed Fakhri; Friis, Henrik

2018-01-01

Quartz cements of the quartz arenitic sandstones from the Chalky Nasara and Ora section of the (Devonian-Carboniferous) Ora Formation in northern Iraq have been studied. A combination of Hot-Cathodoluminescence (CL), LA-ICP-MS and fluid inclusions microthermometry revealed three syntaxial quartz......-bedded sandstones than in the6 thickly-bedded sandstones filling most of remaining pore space during mesogenesis. The Q3 was formed during early telogenesis stage fully cementing the sandstones and the fractures were filled by hydrothermal chlorite and sulfides. Significant amount of trace elements Al, Li, Ge...

A randomized, double-blinded, controlled trial of the effects of fluid rate and/or presence of dextrose in intravenous fluids on the labor course of nulliparas.

Science.gov (United States)

Fong, Alex; Serra, Allison E; Caballero, Deysi; Garite, Thomas J; Shrivastava, Vineet K

2017-08-01

Prolonged labor has been demonstrated to increase adverse maternal and neonatal outcome. A practice that may decrease the risk of prolonged labor is the modification of fluid intake during labor. Several studies demonstrated that increased hydration in labor as well as addition of dextrose-containing fluids may be associated with a decrease in length of labor. The purpose of our study was to characterize whether high-dose intravenous fluids, standard-dose fluids with dextrose, or high-dose fluids with dextrose show a difference in the duration of labor in nulliparas. Nulliparous subjects with singletons who presented in active labor were randomized to 1 of 3 groups of intravenous fluids: 250 mL/h of normal saline, 125 mL/h of 5% dextrose in normal saline, or 250 mL/h of 2.5% dextrose in normal saline. The primary outcome was total length of labor from initiation of intravenous fluid in vaginally delivered subjects. Secondary outcomes included cesarean delivery rate and length of second stage of labor, among other maternal and neonatal outcomes. In all, 274 subjects who met inclusion criteria were enrolled. There were no differences in baseline characteristics among the 3 groups. There was no difference in the primary outcome of total length of labor in vaginally delivered subjects among the 3 groups. First stage of labor duration, second stage of labor duration, and cesarean delivery rates were also equivalent. There were no differences identified in other secondary outcomes including clinical chorioamnionitis, postpartum hemorrhage, blood loss, Apgar scores, or neonatal intensive care admission. There is no difference in length of labor or delivery outcomes when comparing high-dose intravenous fluids, addition of dextrose, or use of high-dose intravenous fluids with dextrose in nulliparous women who present in active labor. Copyright © 2017 Elsevier Inc. All rights reserved.

Fluid inclusions in minerals associated to uranium mineralization in Jazida do Engenho (anomaly 09), Lagoa Real uranium province - Bahia, Brazil

International Nuclear Information System (INIS)

Souza, Aurelio da Silva de

2009-01-01

The Engenho deposit (anomaly 09) is south-eastern from Cachoeira Mine (anomaly 13), in the northern part of the Province. The uranium mineralization is associated to 'albitites' (over 70% of albite/oligoclase). Epidosites with uranium may also occur. The 'albitite' main minerals are pyroxene, gamet, albite/oligoclase feldspar, amphibole and biotite. Pyroxene, gamet, plagioclase, titanite and epidote are the minerals associated to the uranium mineralization. The fluids related to pyroxene, gamet and epidote are aqueous-saline, primary and with no carbonic phases and are constant, with small variations. They all present medium to high salinity (14 to 18wt% NaCl eq.), the higher values being related to pyroxene and the lower ones related to gamet and epidote. The fluids associated to albite/oligoclase, although aqua-saline and with no carbonic phases, show salinities much lower than in pyroxene, gamet and epidote, suggesting a intense dilution process indicating dilution toward the later minerals phases. The data suggest the pyroxene formation process occurring under a 3,5 kbar pressure condition which corresponds to approximately 10km depth. The dispersion on Th in albites, due probably to the overheating and non elastic increase in volume, precluded a reliable pressure calculation. The IF's microscopy m plagioclase gneiss (albitites host-rocks) suggests the probability of primary carbonic fluids associated to these minerals. The fluids with CO 2 showed in the gneiss maybe also be present in the albitites, probably as late or intergranular fluids. This assumption is based on the fact that signs of carbonic gases were shown during crushing tests. These tendencies suggest the occurrence of two albitization phases in this Lagoa Real area: one associated to a fluid composed by H 2 O + CO 2 + salts (in the gneiss host) and another (in the albitite) formed by an aqueous-saline phase. The data indicate the Brasiliano event as a thermal event without a predominant fluid

Understanding Inclusion in Cyprus

Science.gov (United States)

Mamas, Christoforos

2013-01-01

This paper provides a framework for understanding inclusion in Cyprus. The evidence base is the result of a six-month qualitative research study in five Cypriot mainstream primary schools. Despite the rhetoric in favour of inclusion, it seems that the Cypriot educational system is still highly segregating in its philosophy and does not fully…

Heat and fluid dynamic in the primary circuit of a research reactor

International Nuclear Information System (INIS)

Gebrin, A.N.

1986-01-01

Aiming at the analysis of some thermohydraulic transients that may affect the safety of a reactor core, a FORTRAN program was developed which evaluates the heat and fluid dynamics in the primary circuit of a research reactor. The selection of the pump, the determination of the length and diameter of the pipes, as well as the appropriate arrangement of the pipes and heat exchanger, are determined from the stationary regime. (Author) [pt

Attitudes of a group of primary school teachers towards the educational inclusion of hearing-impaired learners in regular classrooms.

Science.gov (United States)

Keith, K; Ross, E

1998-01-01

Research has clearly demonstrated a link between the attitudes of regular education teachers and the success of inclusion of learners with special educational needs. Therefore, the present study aimed to investigate the attitudes of a group of junior primary school teachers from the Gauteng area towards the inclusion of hearing-impaired children into regular classes. A survey research design was employed which utilized a questionnaire as the research tool. Analysis of results indicated that the teachers surveyed were relatively positive in their attitudes towards inclusion. Greater exposure to disability in terms of training and experience was related to more positive attitudes. Similarly, more positive attitudes were related to greater perceived competence in teaching hearing-impaired pupils. All of the teachers surveyed felt that speech-language pathologists and audiologists (SLPs & As) should be involved in facilitating inclusion of hearing-impaired children. Many of the respondents expressed concern regarding their lack of training, knowledge and skills. The findings from the research project highlight the need for an adequate training and support system for teachers prior to the implementation of an inclusive educational policy, and the potential role of SLPs & As in this regard.

Stiffening solids with liquid inclusions

Science.gov (United States)

Style, Robert W.; Boltyanskiy, Rostislav; Allen, Benjamin; Jensen, Katharine E.; Foote, Henry P.; Wettlaufer, John S.; Dufresne, Eric R.

2015-01-01

From bone and wood to concrete and carbon fibre, composites are ubiquitous natural and synthetic materials. Eshelby’s inclusion theory describes how macroscopic stress fields couple to isolated microscopic inclusions, allowing prediction of a composite’s bulk mechanical properties from a knowledge of its microstructure. It has been extended to describe a wide variety of phenomena from solid fracture to cell adhesion. Here, we show experimentally and theoretically that Eshelby’s theory breaks down for small liquid inclusions in a soft solid. In this limit, an isolated droplet’s deformation is strongly size-dependent, with the smallest droplets mimicking the behaviour of solid inclusions. Furthermore, in opposition to the predictions of conventional composite theory, we find that finite concentrations of small liquid inclusions enhance the stiffness of soft solids. A straightforward extension of Eshelby’s theory, accounting for the surface tension of the solid-liquid interface, explains our experimental observations. The counterintuitive stiffening of solids by fluid inclusions is expected whenever inclusion radii are smaller than an elastocapillary length, given by the ratio of the surface tension to Young’s modulus of the solid matrix. These results suggest that surface tension can be a simple and effective mechanism to cloak the far-field elastic signature of inclusions.

Fluid inclusion and stable isotopes studies of epithermal gold-bearing veins in the SE Afar Rift (Djibouti)

Science.gov (United States)

Moussa, N.; Boiron, M. C.; Grassineau, N.; Fouquet, Y.; Le Gall, B.; Mohamed, J.

2015-12-01

The Afar rift results from the interaction of a number of actively-propagating tectono-magmatic axes. Recent field investigations in the SE Afar rift have emphasized the importance of hydrothermal system in rift-related volcanic complexes. Mineralization occur as gold-silver bearing veins and are associated with felsic volcanism. Late carbonate veins barren of sulfides and gold are common. The morphologies and textures of quartz show crustiform colloform banding, massive and breccias. Microthermometric measurements were made on quartz-hosted two phases (liquid + vapor) inclusions; mean homogenization temperature range from 150°C to 340°C and ice-melting temperatures range from -0.2° to 1.6°C indicating that inclusion solutions are dilute and contain 0.35 to 2.7 equivalent wt. % NaCl. Furthermore, δ18O and δ13C values from calcite range from 3.7 to 26.6 ‰ and -7.5 to 0.3‰, respectively. The presence of platy calcite and adularia indicate that boiling condition existed. This study shows that precious-metal deposition mainly occurred from hydrothermal fluids at 200°C at around 300 and 450 m below the present-day surface in a typical low-sulphidation epithermal environment.

Inclusion study of hourglass amethyst from Boudi (Morocco) by Raman microspectroscopy and microthermometric measurements

Science.gov (United States)

Dumańska-Słowik, Magdalena; Toboła, Tomasz; Jarmołowicz-Szulc, Katarzyna; Naglik, Beata; Dyląg, Joanna; Szczerba, Jacek

2017-12-01

Amethyst from Boudi with characteristic hourglass colour zoning hosts numerous pseudo-secondary fluid and mineral inclusions. Measured values of temperature homogenization (Th) for selected fluid inclusion assemblages (FIA) in colourless and violet regions of the crystal range from 154 to 330 °C. The higher temperatures values are characteristic for violet zones than colourless regions of the crystal. The brine content and concentration vary from 5.71 to 13.94 wt% NaCl eq. Raman spectra of selected fluid inclusions revealed they are mainly composed of H2O (3500-3000 cm- 1) and subordinately CO2 both gaseous and liquid (1386 cm- 1 and 1281 cm- 1). Mineral inclusions are mainly represented by hematite with marker bands at 1321, 413, 293 and 227 cm- 1, subordinately quartz. Amethyst crystallized from medium- to low-temperature silica fluids (191-445 °C, 64-131 MPa) containing some amounts of CO2 and Fe at hydrothermal stage of post magmatic activity in Boudi (Morocco). Its possible depth of formation was calculated to be ca. 2.8-5.7 km.

A case study: Inclusion for children with psychiatric diagnosis in physical education (PE) at primary school

DEFF Research Database (Denmark)

Bentholm, Anette Lisbeth

A case study: Inclusion for children with psychiatric diagnosis in physical education (PE) at primary school.Research bagground and aim:A large majority in the Danish parliament decided in 2012 that more children with special needs for example children with psychiatric diagnosis as autism spectrum...... activities at least 45 minutes each school day (Bekendtgørelse af lov om folkeskolen, 2014). ASD and ADHD are disabling conditions that emerge in childhood and affects social communication and interaction, and often also their motor skill performance and cognition fx. academic skills (Harvey & Reid, 2003...... framework:My overall research design is a Case study, because the research question requires an “in-depth” description and valuable insights to the complexities of the social phenomenon of inclusion and exclusions processes (Flyvbjerg, 2006; Yin, 2014). The research focus on 11 children with psychiatric...

Experimental petrology for the thermobarometric determination of mineral paragenesis: the fluid inclusions; Petrologia experimental para la determinacion termobarometrica de paragenesis minerales: las inclusiones fluidas

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Partida, Eduardo; Torres Rodriguez, Vicente; Birkle, Peter [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1994-05-01

There is a great number of phenomena in nature in which some fluid participates as the main component. Such is the case of oil deposits formation, of metallic minerals, geothermal systems, metamorphic and diagenetic deposits. The common denominator of all of them is that in some part of their stages important physico-chemical processes occurred in the related fluids, leaving evidence of such phenomena in the fluid inclusions. The Geothermal Department has petrologic vanguard tools for reservoir problems resolution, since it has laboratories for the study on fluid inclusions by means of the technique called cryoscopic-microthermometry that permits the definition of physico-chemical conditions of the brine that participated or participates in the hydrothermal systems formation. The method simultaneously permits to know the characteristics of the initial brine that participated in the interaction water-rock phenomenon, observe the boiling phenomena, and determine conditions of initial pressure in the reservoirs. [Espanol] Existe un gran numero de fenomenos en la naturaleza en los que participa algun fluido como componente principal. Tal es el caso de la formacion de yacimientos de petroleo, de minerales metalicos, de sistemas geotermicos, yacimientos metamorficos y diageneticos. El comun denominador de todos ellos es que en alguna de sus etapas ocurrieron procesos fisicoquimicos importantes en los fluidos relacionados, quedando evidencia de tales fenomenos en las inclusiones fluidas. El Departamento de Geotermia cuenta con herramientas petrologicas de vanguardia para la resolucion de problemas en yacimientos, ya que tiene laboratorios para el estudio de las inclusiones fluidas por medio de la tecnica denominada microtermometria-crioscopica que permite definir condiciones fisicoquimicas de la salmuera que participo o participa en la formacion de sistemas hidrotermales. El metodo permite simultaneamente conocer las caracteristicas de la salmuera inicial que participo en

The genesis of the Hashitu porphyry molybdenum deposit, Inner Mongolia, NE China: constraints from mineralogical, fluid inclusion, and multiple isotope (H, O, S, Mo, Pb) studies

Science.gov (United States)

Zhai, Degao; Liu, Jiajun; Tombros, Stylianos; Williams-Jones, Anthony E.

2018-03-01

The Hashitu porphyry molybdenum deposit is located in the Great Hinggan Range Cu-Mo-Pb-Zn-Ag polymetallic metallogenic province of NE China, in which the Mo-bearing quartz veins are hosted in approximately coeval granites and porphyries. The deposit contains more than 100 Mt of ore with an average grade of 0.13 wt.% Mo. This well-preserved magmatic-hydrothermal system provides an excellent opportunity to determine the source of the molybdenum, the evolution of the hydrothermal fluids and the controls on molybdenite precipitation in a potentially important but poorly understood metallogenic province. Studies of fluid inclusions hosted in quartz veins demonstrate that the Hashitu hydrothermal system evolved to progressively lower pressure and temperature. Mineralogical and fluid inclusion analyses and physicochemical calculations suggest that molybdenite deposition occurred at a temperature of 285 to 325 °C, a pressure from 80 to 230 bars, a pH from 3.5 to 5.6, and a Δlog fO2 (HM) of -3.0, respectively. Results of multiple isotope (O, H, S, Mo, and Pb) analyses are consistent in indicating a genetic relationship between the ore-forming fluids, metals, and the Mesozoic granitic magmatism (i.e., δ 18OH2O from +1.9 to +9.7‰, δDH2O from -106 to -87‰, δ 34SH2S from +0.3 to +3.9‰, δ 98/95Mo from 0 to +0.37‰, 206Pb/204Pb from 18.2579 to 18.8958, 207Pb/204Pb from 15.5384 to 15.5783, and 208Pb/204Pb from 38.0984 to 42.9744). Molybdenite deposition is interpreted to have occurred from a low-density magmatic-hydrothermal fluid in response to decreases in temperature, pressure, and fO2.

[What Enhances Teachers' Health at Inclusive Primary Schools? A Mixed-Methods Approach].

Science.gov (United States)

Riechmann-Wolf, Merle; Claus, Matthias; Kimbel, Renate; Schöne, Klaus; Claus, Annika; Letzel, Stephan; Rose, Dirk-Matthias

2018-02-01

Teachers' suggestions to enhance their health at inclusive primary schools ("Schwerpunktgrundschulen") were analyzed by quantitative content analysis taking personal or job-related parameters of effort and strain into consideration. The paper and pencil cross-sectional study was conducted by Institut für Lehrergesundheit (IFL) between August 2013 and April 2015 at 14 schools in Rhineland-Palatinate. Overall response rate was 46.3% (143/309 teachers). The answers to the open-ended question "Which concrete job-related measures would enhance your wellbeing or health situation at your work place?" was categorized and quantified. An analysis of the item-non-response was undertaken. The aim was to identify by logistic regression, personal or job-related parameters of effort or strain associated with a specific category. Data from 143 teachers were analyzed. 79 teachers made 362 suggestions to enhance the health situation at their work place. Making a suggestion was not related to socio-demographic parameters. 33.6% of the teachers addressed physical environmental conditions of work, e. g., climatic or acoustic conditions or the availability of space for recreation. 29.4% of the teachers made suggestions concerning human resource strategy (e. g., "double teaching"). 9.1% of the teachers referred to aspects of relationships with colleagues. After regression analysis, there were relationships between suggestions of single categories and specific job-related parameters of effort. Furthermore, teachers under (high) strain - here: teachers who (very) strongly experienced their work as hazardous to health - showed significantly higher odds to make suggestions of the categories "Colleagues" (aOR 3.71; 95%CI 1.00-13.76) or "External Support" (e. g., "supervision") (aOR 3.92; 95%CI 1.15-13.41) than teachers experiencing less stress. Teachers of inclusive primary schools are ready to take active part in health-related organizational development. The development of problem

Polymineralic inclusions in mantle chromitites from the Oman ophiolite indicate a highly magnesian parental melt

Science.gov (United States)

Rollinson, Hugh; Mameri, Lucan; Barry, Tiffany

2018-06-01

Polymineralic inclusions interpreted as melt inclusions in chromite from the dunitic Moho Transition Zone in the Maqsad area of the Oman ophiolite have been analysed and compositions integrated using a rastering technique on the scanning electron microscope. The inclusions now comprise a range of inter-grown hydrous phases including pargasite, aspidolite, phlogopite and chlorite, indicating that the parental melts were hydrous. Average inclusion compositions for seven samples contain between 23.1 and 26.8 wt% MgO and 1.7-3.6 wt% FeO. Compositions were corrected to allow for the low FeO concentrations using coexisting olivine compositions. These suggest that the primary melt has between 20 and 22 wt% MgO and 7-9.7 wt% FeO and has an affinity with boninitic melts, although the melts have a higher Ti content than most boninites. Average rare earth element concentrations suggest that the melts were derived from a REE depleted mantle source although fluid-mobile trace elements indicate a more enriched source. Given the hydrous nature of the inclusions this enrichment could be fluid driven. An estimate of the melt temperature can be made from the results of homogenisation experiments on these inclusions and suggests 1300 °C, which implies for a harzburgite solidus, relatively shallow melting at depths of <50 km and is consistent with a boninitic origin. The current "basaltic" nature of the chromite host to highly magnesian melt inclusions suggests that the dunitic Moho Transition Zone operated as a reaction filter in which magnesian melts were transformed into basalts by the removal of high magnesian olivines, particularly in areas where the Moho Transition Zone is unusually thick. We propose therefore that podiform mantle chromitites, even those with an apparent MORB-like chemical signature, have crystallised from a highly magnesian parental melt. The data presented here strongly support the view that this took place in a subduction initiation setting.

Evidence on Inclusion

DEFF Research Database (Denmark)

Dyssegaard, Camilla Brørup; Larsen, Michael Søgaard

The purpose of this publication is to examine existing research on inclusion to identify strategies of inclusion that have generated positive effects. To do so it is necessary to understand the effect of the applied strategies. One approach, which is being discussed, is to use evidence to determine...... which methods have proven more effective than others. The desire to gain insight into research on inclusion forms the basis of the current systematic review. The task was to determine which strategies primary research has found to be most effective for inclusion purposes. We have solved this task...... by addressing the existing research with the following question: What is the effect of including children with special needs in mainstream teaching in basic school, and which of the applied educational methods have proved to have a positive effect?...

Geology, geochemistry and fluid inclusion of Qarachilar Cu-Mo-Au quartz veins, northeast of Kharvana, East Azerbaijan

Directory of Open Access Journals (Sweden)

Fariba Asiay Soufiani

2018-04-01

ICP-MS for trace elements and REE at the Zarazma Co., Tehran, Iran. Microthermometric data were performed on primary fluid inclusions using the Linkam THMS600 heating–freezing stage at the Iranian Mineral Processing Research Center (IMPRC, Tehran, Iran. Results The rock units exposed in the Qarachilar area are different sets of magmatic phases of QDB including granodiorite-quartz monzodiorite, porphyritic granite, quartz monzonite and acidic-intermediate dikes. Granodiorite-quartz monzodiorite is the dominant phase which hosts the Qarachilar quartz-sulfide veins. Mineralization at Qarachilar occurs as three quartz-sulfide veins. The veins reach up to 700-m in length and average 1-m in width, reaching a maximum of 2-m. They are generally steeply-dipping to the NE at 80°. The reported grades of Mo, Cu and Au range from 20 ppm to 3.6 wt%, 0.7 wt% to 5 wt%, and 0.23 to 37.2 g/t, respectively. Four stages of mineralization can be distinguished at Qarachilar. Stage-1 is represented by quartz veins (ranging from centimeters up to ≤1-m width that contain variable amounts of chalcopyrite and pyrite. Stage-2 is marked by Tm-h and type-2 (Tm-h>Th inclusions are homogenized in the range of 197-530°C and 203-375°C, respectively. They have a calculated bulk salinity of 29.5 to 55.1 and 32.4 to 45.6 wt% NaCl equiv., respectively. The variations in salinity and Th could be explained by a combination of mixing and boiling hydrothermal fluids. These processes led to the deposition of Cu, Mo and Au in the veins. Geology, ore mineralogy, textures, geochemistry and microthermometric data of Qarachilar occurrence are comparable with vein-type Cu-Mo-Au mineralization related to Cu-Mo porphyry and intrusion related gold deposits. References Jamali, H., Dilek, Y., Daliran, F., Yaghubpour, A.M. and Mehrabi, B., 2010. Metallogeny and tectonic evolution of the Cenozoic Ahar-Arasbaran volcanic belt, northern Iran. International Geology Review, 52(4–6: 608–630. Jamali, H. and Mehrabi, B

Effectiveness of a fluid chart in outpatient management of suspected dengue fever: A pilot study.

Science.gov (United States)

Nasir, Nazrila Hairin; Mohamad, Mohazmi; Lum, Lucy Chai See; Ng, Chirk Jenn

2017-01-01

Dengue infection is the fastest spreading mosquito-borne viral disease in the world. One of the complications of dengue is dehydration which, if not carefully monitored and treated, may lead to shock, particularly in those with dengue haemorrhagic fever. WHO has recommended oral fluid intake of five glasses or more for adults who are suspected to have dengue fever. However, there have been no published studies looking at self-care intervention measures to improve oral fluid intake among patients suspected of dengue fever. To assess the feasibility and effectiveness of using a fluid chart to improve oral fluid intake in patients with suspected dengue fever in a primary care setting. This feasibility study used a randomized controlled study design. The data was collected over two months at a primary care clinic in a teaching hospital. The inclusion criteria were: age > 12 years, patients who were suspected to have dengue fever based on the assessment by the primary healthcare clinician, fever for > three days, and thrombocytopenia (platelets dengue home care card. The intervention group received the fluid chart and a cup (200ml). Baseline clinical and laboratory data, 24-hour fluid recall (control group), and fluid chart were collected. The main outcomes were: hospitalization rates, intravenous fluid requirement and total oral fluid intake. Among the 138 participants who were included in the final analysis, there were fewer hospital admissions in the intervention group (n = 7, 10.0%) than the control group (n = 12, 17.6%) (p = 0.192). Similarly, fewer patients (n = 9, 12.9%) in the intervention group required intravenous fluid compared to the control group (n = 15, 22.1%), (p = 0.154). There was an increase in the amount of daily oral fluid intake in the intervention group (about 3,000 ml) compared to the control group (about 2,500 ml, p = 0.521). However, these differences did not reach statistical significance. This is a feasible and acceptable study to perform in

The mangazeya Ag-Pb-Zn vein deposit hosted in sedimentary rocks, Sakha-Yakutia, Russia: Mineral assemblages, fluid inclusions, stable isotopes (C, O, S), and origin

Science.gov (United States)

Anikina, E. Yu.; Bortnikov, N. S.; Klubnikin, G. K.; Gamyanin, G. N.; Prokof'ev, V. Yu.

2016-05-01

The succession of mineral assemblages, chemistry of gangue and ore minerals, fluid inclusions, and stable isotopes (C, O, S) in minerals have been studied in the Mangazeya silver-base-metal deposit hosted in terrigenous rocks of the Verkhoyansk Fold-Thrust Belt. The deposit is localized in the junction zone of the Kuranakh Anticlinorium and the Sartanga Synclinorium at the steep eastern limb of the Endybal Anticline. The deposit is situated at the intersection of the regional Nyuektame and North Tirekhtyakh faults. Igneous rocks are represented by the Endybal massif of granodiorite porphyry 97.8 ± 0.9 Ma in age and dikes varying in composition. One preore and three types of ore mineralization separated in space are distinguished: quartz-pyrite-arsenopyrite (I), quartz-carbonate-sulfide (II), and silver-base-metal (III). Quartz and carbonate (siderite) are predominant in ore veins. Ore minerals are represented by arsenopyrite, pyrite, sphalerite, galena, fahlore, and less frequent sulfosalts. Three types of fluid inclusions in quartz differ in phase compositions: two- or three-phase aqueous-carbon dioxide (FI I), carbon dioxide gas (FI II), and two-phase (FI III) containing liquid and a gas bubble. The homogenization temperature and salinity fall within the ranges of 367-217°C and 13.8-2.6 wt % NaCl equiv in FI I; 336-126°C and 15.4-0.8 wt % NaCl equiv in FI III. Carbon dioxide in FI II was homogenized in gas at +30.2 to +15.3°C and at +27.2 to 29.0°C in liquid. The δ34S values for minerals of type I range from-1.8 to +4.7‰ (V-CDT); of type II, from-7.4 to +6.6‰; and of type III, from-5.6 to +7.1‰. δ13C and δ18O vary from-7.0 to-6.7‰ (V-PDB) and from +16.6 to +17.1 (V-SMOW) in siderite-I; from-9.1 to-6.9‰ (V-PDB) and from +14.6 to +18.9 (V-SMOW) in siderite-II; from-5.4 to-3.1‰ (V-PDB) and from +14.6 to +19.5 (V-SMOW) in ankerite; and from-4.2 to-2.9‰ (V-PDB) and from +13.5 to +16.8 (V-SMOW) in calcite. The data on mineral assemblages, fluid

Evolution of the volcanic plumbing systemof Alicudi (Aeolian Islands - Italy: evidence from fluid and melt inclusionsin quartz xenoliths

Directory of Open Access Journals (Sweden)

A. Peccerillo

2004-06-01

Full Text Available Quartz-rich xenoliths in lavas (basalts to andesites; 90-30 ka from Alicudi contain abundant melt and fluid inclusions. Two generations of CO2-rich fluid inclusions are present in quartz-rich xenolith grains: early (Type I inclusions related to partial melting of the host xenoliths, and late Type II inclusions related to the fluid trapping during xenolith ascent. Homogenisation temperatures of fluid inclusions correspond to two density intervals: 0.93-0.68 g/cm3 (Type I and 0.47-0.26 g/cm3 (Type II. Early Type I fluid inclusions indicate trapping pressures around 6 kbar, which are representative for the levels of partial melting of crustal rocks and xenolith formation. Late Type II fluid inclusions show lower trapping pressures, between 1.7 kbar and 0.2 kbar, indicative for shallow magma rest and accumulation during ascent to the surface. Data suggest the presence of two magma reservoirs: the first is located at lower crustal depths (about 24 km, site of fractional crystallization, mixing with source derived magma, and various degrees of crustal assimilation. The second magma reservoir is located at shallow crustal depths (about 6 km, the site where magma rested for a short time before erupting.

Geology, mineralization, and fluid inclusion study of the Kuru-Tegerek Au-Cu-Mo skarn deposit in the Middle Tien Shan, Kyrgyzstan

Science.gov (United States)

Soloviev, Serguei G.; Kryazhev, Sergey; Dvurechenskaya, Svetlana

2018-02-01

The Kuru-Tegerek Cu-Au-Mo deposit is situated in a system of Late Carboniferous subduction-related magmatic arcs of the Middle Tien Shan, which together constitute a metallogenic belt of Cu-Au-Mo (±W) porphyry, with local skarns, deposits. The deposit is related to magnetite-series gabbro-diorite to tonalite intrusion. It contains prograde magnesian and calcic skarns with abundant magnetite, associated with gabbro-diorite, and retrograde skarn with Cu mineralization, formed after intrusion of tonalite. Subsequent propylitic alteration introduced abundant chalcopyrite and pyrrhotite, and native Au culminating in zones overprinting magnetite and garnet skarn. Later quartz-muscovite-carbonate veins, formed after intrusion of late mafic quartz monzogabbro dikes, contain chalcopyrite, pyrite, arsenopyrite and other sulfides and sulfosalts, tellurides, and native Au. The earliest retrograde skarn garnet contains gaseous low-salinity (1.7-3.4 wt.% NaCl eq.) fluid inclusions homogenizing at 460-500 °C into vapor, indicating that the early fluid released from crystallizing magma was a low-density vapor. It was followed by more saline (4.0-5.0 wt.% NaCl eq.), high-temperature (400-440 °C) aqueous fluid, as fluid release from the magma progressed. Boiling of this fluid at temperatures of 420 to 370 °C and a pressure of 350-300 bar produced a low-salinity (0.6-1.2 wt.% NaCl eq.), essentially gaseous, and high-salinity (from 39 to 31 wt.% NaCl eq.) brine, with possible metal (including Cu) partitioning into both gaseous and aqueous-saline phases. Boiling was coeval with sulfide deposition in the retrograde skarn. The latest episode of the retrograde skarn stage included direct separation of saline ( 40-42 wt.% NaCl eq.) fluid from crystallizing magma. The separation of saline ( 40 to 14 wt.% NaCl eq.) fluids from a crystallizing magmatic melt continued during the propylitic stage, when fluid cooling from 370 to 320 °C, together with decreasing fO2, caused Cu and especially

Inclusive Education: Teacher Perspectives from Malaysia

Science.gov (United States)

Bailey, Lucy; Nomanbhoy, Alefiya; Tubpun, Tida

2015-01-01

This paper reports on a survey of views of inclusive education expressed by nearly 300 Malaysian primary school teachers involved in remedial literacy and numeracy education under the country's Literacy and Numeracy Strategy. Overall, the views expressed were positive towards the principle of inclusion. However, despite common professional…

Chlorine Isotope Evidence for Syn-Subduction Modification of Serpentinites by Interaction with Sediment-Derived Fluid

Science.gov (United States)

Selverstone, J.; Sharp, Z. D.

2012-12-01

High-pressure serpentinites and rodingites and high- to ultrahigh-pressure metasedimentary rocks from the Aosta region, Italy, preserve strikingly different chlorine isotope compositions that can be used to constrain the nature of fluid-rock interactions during subduction. Serpentinites and rodingitized gabbroic dikes subducted to 70-80 km have bulk δ37Cl values between -1.6 and +0.9‰ (median= -0.5‰, n=26 plus 5 replicates; one amphibole-vein outlier at -2.9‰). Serpentinite δ37Cl values are positively correlated with Cr ± Cl contents (r2= 0.97 and 0.58) and negatively correlated with CaO (r2=0.72). BSE imaging and X-ray mapping reveal up to three generations of compositionally distinct serpentine and chlorite in single samples. The youngest generation, which is most abundant, has the lowest chlorine content. Three rodingite samples contain abundant texturally early fluid inclusions. These samples were finely crushed and leached in 18 MΩ H2O to extract water-soluble chlorides. The leachates, which are assumed to record the compositions of the fluid inclusions, have δ37Cl values that are 0.7-1.5‰ lower than the corresponding bulk rock values. Leachate from the outlier amph-magnesite vein is indistinguishable from the bulk value at -2.7‰. There is almost no overlap between the Cl isotope compositions of HP serp/rod samples and associated HP/UHP metasedimentary rocks. Calcmica schists, diamond-bearing Mn nodules, and impure marbles subducted to >130 km and calcmica schists and Mn crusts transported to 70-80 km have δ37Cl values between -4.5 and -1.5‰ (median= -2.7‰, n=25 plus 7 replicates; two outlier points at -0.5‰). Primary fluid inclusions in the diamondiferous samples contain carbonate- and silicate-bearing aqueous fluids with very low chloride contents (Frezzotti et al., 2011, Nature Geosci). Taken together, these data record a history of progressive modification of serpentinites and rodingites by mixing with low-δ37Cl, low-Cl, high

Analysis of Direct Samples of Early Solar System Aqueous Fluids

Science.gov (United States)

Zolensky, Michael E.; Bodnar, R J.; Fedele, L.; Yurimoto,H.; Itoh, S.; Fries, M.; Steele, A.

2012-01-01

Over the past three decades we have become increasingly aware of the fundamental importance of water, and aqueous alteration, on primitive solar-system bodies. Some carbonaceous and ordinary chondrites have been altered by interactions with liquid water within the first 10 million years after formation of their parent asteroids. Millimeter to centimeter-sized aggregates of purple halite containing aqueous fluid inclusions were found in the matrix of two freshly-fallen brecciated H chondrite falls, Monahans (1998, hereafter simply "Monahans") (H5) and Zag (H3-6) (Zolensky et al., 1999; Whitby et al., 2000; Bogard et al., 2001) In order to understand origin and evolution of the aqueous fluids inside these inclusions we much measure the actual fluid composition, and also learn the O and H isotopic composition of the water. It has taken a decade for laboratory analytical techniques to catch up to these particular nanomole-sized aqueous samples. We have recently been successful in (1) measuring the isotopic composition of H and O in the water in a few fluid inclusions from the Zag and Monahans halite, (2) mineralogical characterization of the solid mineral phases associated with the aqueous fluids within the halite, and (3) the first minor element analyses of the fluid itself. A Cameca ims-1270 equipped with a cryo-sample-stage of Hokkaido University was specially prepared for the O and H isotopic measurements. The cryo-sample-stage (Techno. I. S. Corp.) was cooled down to c.a. -190 C using liquid nitrogen at which the aqueous fluid in inclusions was frozen. We excavated the salt crystal surfaces to expose the frozen fluids using a 15 keV Cs+ beam and measured negative secondary ions. The secondary ions from deep craters of approximately 10 m in depth emitted stably but the intensities changed gradually during measurement cycles because of shifting states of charge compensation, resulting in rather poor reproducibility of multiple measurements of standard fluid

Elevated levels of numerous cytokines in drainage fluid after primary total hip arthroplasty.

Science.gov (United States)

van der Heide, Huub J L; van der Kraan, Peter M; Rijnberg, Willard J; Buma, Pieter; Schreurs, B Willem

2010-12-01

As cytokines are involved in wound healing and other inflammatory processes, it could be valuable to measure their levels at the operative site. This study was conducted to investigate whether different cytokines are measurable in drainage fluid and, when measurable, whether we can find a difference in cytokine levels between one and six hours postoperatively. Samples from the drainage system in 30 consecutive patients undergoing primary total hip replacement were collected at one and six hours after closure of the wound. Levels of several cytokines were measured in the drainage fluids. A significant elevation of almost all cytokines was observed between the sample after one hour and six hours postoperatively. We found a strong correlation between the different pro-inflammatory cytokines. The IL-6 to IL-10 ratio were also raised, showing a pro-inflammatory predominance. Levels were much higher than those previously shown in serum.

Invasion of Hydrous Fluids Predates Kimberlite Formation

Science.gov (United States)

Kopylova, M. G.; Wang, Q.; Smith, E. M.

2017-12-01

Petrological observations on diamonds and peridotite xenoliths in kimberlites point towards an influx of hydrous metasomatic fluids shortly predating kimberlite formation. Diamonds may grow at different times within the same segment of the cratonic mantle, and diamonds that form shortly before (diamonds typically contain 10-25 wt.% water in fluid inclusions, while older octahedrally-grown diamonds host "dry" N2-CO2 fluids. Our recent studies of fluids in diamond now show that many different kinds of diamonds can contain fluid inclusions. Specifically, we found a new way to observe and analyze fluids in octahedrally-grown, non-fibrous diamonds by examining healed fractures. This is a new textural context for fluid inclusions that reveals a valuable physical record of infiltrating mantle fluids, that postdate diamond growth, but equilibrate within the diamond stability field at depths beyond 150 km. Another sign of the aqueous fluids influx is the formation of distinct peridotite textures shortly predating the kimberlite. Kimberlites entrain peridotite xenoliths with several types of textures: older coarse metamorphic textures and younger, sheared textures. The preserved contrast in grain sizes between porphyroclasts and neoblasts in sheared peridotites constrain the maximum duration of annealing. Experimental estimates of the annealing time vary from 7x107 sec (2 years) to 106 years (1 My) depending on olivine hydration, strain rate, pressure, temperature and, ultimately, the annealing mechanism. Kimberlite sampling of sheared peridotites from the lithosphere- asthenosphere boundary (LAB) implies their formation no earlier than 1 My prior to the kimberlite ascent. Water contents of olivine measured by FTIR spectrometry using polarized light demonstrated contrasting hydration of coarse and sheared samples. Olivine from sheared peridotite samples has the average water content of 78±3 ppm, in contrast to the less hydrated coarse peridotites (33±6 ppm). LAB hydration

P-T path fluid evolution in the Gross Spitzkoppe granite stock, Namibia

Directory of Open Access Journals (Sweden)

Stephen Frindt

2002-01-01

Full Text Available The Gross Spitzkoppe granite stock (GSS is a zoned 30 km^2 epizonal intrusion that consists of three main granites: 1 medium-grained biotite granite (marginal, 2 a coarse-grained biotite granite, and 3 a central, porphyritic granite. The stock contains pegmatites as banded marginal stockscheiders and isolated pockets composed of large alkali feldspar and quartz, dark mica, interstitial fluorite, and euhedral topaz and beryl crystals. In the porphyritic granite there are local wolframite-bearing greisens and hydrothermal fluorite and topaz-rich veins.Fluid inclusion studies were conducted on: 1 topaz and quartz crystals from the marginal stockscheider; 2 quartz, topaz, fluorite and beryl crystals from isolated pegmatites; 3 topaz from a miarolitic pegmatite; 4 beryl and quartz veins from greisenized porphyritic granite; and 5 fluorite from a late fluorite vein inthe coarse-grained biotite granite. Preliminary data indicate the presence of three compositionally distinct primary and pseudosecondary inclusion types that are of late magmatic-hydrothermal origin.Type 1. Low salinity (0–10 eq. wt% NaCl H2O (± CO2 inclusions that homogenize to the liquid phase in the temperature range of 300 to 550˚C. These inclusions are from quartz, topaz and beryl. Inclusions in fluorite from the fluorite vein homogenize at ~170˚C and have a salinity of ca. 1–2 eq. wt% NaCl.Type 2. Saline (25–30 eq. wt% NaCl halite-bearing H2O (± CO2 inclusions that homogenize to the liquid phase in the temperature range of 300 to 400˚C. These inclusions are from quartz.Type 3. Low salinity (0–3 eq. wt% NaCl H2O-CO2 inclusions that homogenize to vapor phase in the temperature range of 330 to 550˚C. These inclusions are from quartz and topaz.Hydrothermal fluids from greisen minerals are represented by type 1 and type 2 H2O inclusions. They are predominantly of low salinity (~8 eq. wt% NaCl and homogenize to the liquid phase in the temperature range of 300 to 500�

Inclusive Education at Primary Level: Reality or Phantasm

Directory of Open Access Journals (Sweden)

Itfaq Khaliq Khan

2014-06-01

Full Text Available The objectives of this study were to assess the impacts of Inclusive Education (IE Project implemented in government schools of Islamabad and anticipate its practicability for public schools. Quantitative and qualitative methods were applied for data collection. Study instruments were structured interviews, unstructured focus group discussions, and questionnaire. The study revealed that Students with Disabilities (SWDs carrypositive attitudes about their mainstreaming and promote friendships among them. The accessibility of school infrastructure normally addresses the needs of all students, but curriculum, equipment, teaching, learning aids, and assessment methods need to be adjusted. Principals in the schools have a positive attitude towards IE and suggested the government take more concrete measures toward mobilizing financial and technical resources for the training of teachers and providing them with technological support. Teachers involved in IE practices have a positive attitude for inclusion of SWDs and they proposed that it can be replicated in all public schools.

Fluid/structure interaction in BERDYNE (Level 4)

International Nuclear Information System (INIS)

Fox, M.J.H.

1988-02-01

A fluid-structure interaction capability has been developed for Level 4 of the finite element dynamics code BERDYNE, as part of the BERSAFE structural analysis system. This permits analysis of small amplitude free or forced vibration of systems comprising elastic structural components and inviscid volumes of possibly compressible fluid. Free fluid surfaces under the influence of gravity may be present. The formulation chosen uses the rigid walled fluid modes, calculated in a preliminary stage, as a basis for description of the coupled system, providing symmetric system matrices for which efficient solution procedures are available. The inclusion of the fluid modal variables within the system matrices is carried out through the use of the BERDYNE 'substructuring' feature, which allows the inclusion of very general 'super-elements' among the normal structural elements. The program also has a seismic analysis capability, used for the analysis of fluid-structure systems subjected to a specified support acceleration time history. In this case analysis is carried out in terms of relative structural motions, but absolute fluid pressures. Application of the BERDYNE fluid/structure interaction capability to some simple test cases produced results in good agreement with results obtained by analytic or independent numerical techniques. Full instructions on the use of the facility will be included in the BERDYNE Level 4 documentation. Interim documentation for the pre-release version is available from the author. (author)

Mechanisms of submicron inclusion re-equilibration during host mineral deformation

Science.gov (United States)

Griffiths, Thomas; Habler, Gerlinde; Abart, Rainer; Rhede, Dieter; Wirth, Richard

2014-05-01

data, and no subgrain boundaries. Secondly, garnet lattice rotation of up to 10° around rational garnet crystal axes is observed in connection with some already coarsened inclusions. Strain concentrations are widespread in some trails, but rare in others. A TEM foil transecting a garnet domain with concentrated lattice rotation in association with inclusions reveals well developed polygonal subgrain walls with few free dislocations. Where dislocation density is greatest, almost no <100nm inclusions are observed, whereas these are more abundant in unstrained garnet domains despite the foil being located entirely within the optically visible bleaching zone. Chlorite inclusions and formation of etch pits at dislocations at the garnet-chlorite interface demonstrate the presence of fluid along subgrain boundaries during this second bleaching process. In summary, brittle deformation in these garnets led to enhanced transport and inclusion re-equilibration by coarsening, forming inclusion trails. The precise mechanism allowing enhanced transport is still to be determined and may have involved fluid supply with or without pipe diffusion along introduced dislocations. Later ductile deformation via dislocations, concentrated at already coarsened inclusions and enhanced by fluid availability, further affected the nanoinclusion population. The inclusion trail microstructure records complex small-scale interaction between deformation and reaction, shedding light on the mechanisms by which re-equilibration and strain localisation can influence each other in deforming host-inclusion systems. Bestmann et al. (2008) Journal of Structural Geology 30: 777-790

Forced fluid removal in intensive care patients with acute kidney injury

DEFF Research Database (Denmark)

Berthelsen, R E; Perner, A; Jensen, A K

2018-01-01

/or continuous renal replacement therapy aiming at net negative fluid balance > 1 mL/kg ideal body weight/hour until cumulative fluid balance calculated from ICU admission reached less than 1000 mL. RESULTS: After 20 months, we stopped the trial prematurely due to a low inclusion rate with 23 (2%) included...... patients out of the 1144 screened. Despite the reduced sample size, we observed a marked reduction in cumulative fluid balance 5 days after randomisation (mean difference -5814 mL, 95% CI -2063 to -9565, P = .003) with forced fluid removal compared to standard care. While the trial was underpowered...... for clinical endpoints, no point estimates suggested harm from forced fluid removal. CONCLUSIONS: Forced fluid removal aiming at 1 mL/kg ideal body weight/hour may be an effective treatment of fluid accumulation in ICU patients with acute kidney injury. A definitive trial using our inclusion criteria seems...

Composition and source of salinity of ore-bearing fluids in Cu-Au systems of the Carajás Mineral Province, Brazil

Science.gov (United States)

Xavier, Roberto; Rusk, Brian; Emsbo, Poul; Monteiro, Lena

2009-01-01

The composition and Cl/Br – NaCl ratios of highly saline aqueous inclusions from large tonnage (> 100 t) IOCG deposits (Sossego, Alvo 118, and Igarapé Bahia) and a Paleoproterozoic intrusion-related Cu-Au-(Mo-W-Bi-Sn) deposit (Breves; Ca-dominated (5 to 10 times more than in porphyry Cu-Au fluids), and contain percent level concentrations of Na and K. IOCG inclusion fluids, however, contain higher Sr, Ba, Pb, and Zn concentrations, but significantly less Bi, than the intrusion-related Breves inclusion fluids. Cu is consistently below detection limits in brine inclusions from the IOCG and intrusion-related systems and Fe was not detected in the latter. Cl/Br and Na/Cl ratios of the IOCG inclusion fluids range from entirely evaporative brines (bittern fluids; e.g. Igarapé Bahia and Alvo 118) to values that indicate mixing with magma-derived brines. Cl/Br and Na/Cl ratios of the Breves inclusion fluids strongly suggest the involvement of magmatic brines, but that possibly also incorporated bittern fluids. Collectively, these data demonstrate that residual evaporative and magmatic brines were important components of the fluid regime involved in the formation of Cu-Au systems in the Carajás Mineral Province.

Hydrocarbon accumulation in deep fluid modified carbonate rock in the Tarim Basin

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

The activities of deep fluid are regionalized in the Tarim Basin. By analyzing the REE in core samples and crude oil, carbon isotope of carbon dioxide and inclusion temperature measurement in the west of the Tazhong Uplift in the western Tarim Basin, all the evidence confirms the existence of deep fluid. The deep fluid below the basin floor moved up into the basin through discordogenic fauit and volcanicity to cause corrosion and metaaomatosis of carbonate rock by exchange of matter and energy. The pore structure and permeability of the carbonate reservoirs were improved, making the carbonate reservoirs an excellent type of deeply buried modification. The fluorite ore belts discovered along the large fault and the volcanic area in the west of the Tazhong Uplift are the outcome of deep fluid action. Such carbonate reservoirs are the main type of reservoirs in the Tazhong 45 oilfield. The carbonate reservoirs in well YM 7 are improved obviously by thermal fluid dolomitization. The origin and territory of deep fluid are associated with the discordogenic fault and volcanicity in the basin. The discordogenic fault and volcanic area may be the pointer of looking for the deep fluid modified reservoirs. The primary characteristics of hydrocarbon accumulation in deep fluid reconstructed carbonate rock are summarized as accumulation near the large fault and volcano passage, late-period hydrocarbon accumulation after volcanic activity, and subtle trap reservoirs controlled by lithology.

HANFORD DOUBLE-SHELL TANK THERMAL and SEISMIC PROJECT. DYTRAN ANALYSIS OF SEISMICALLY INDUCED FLUID-STRUCTURE INTERACTION IN A HANFORD DOUBLE-SHELL PRIMARY TANK

International Nuclear Information System (INIS)

MACKEY, T.C.

2006-01-01

M and D Professional Services, Inc. (M and D) is under subcontract to Pacific Northwest National Laboratories (PNNL) to perform seismic analysis of the Hanford Site Double-Shell Tanks (DSTs) in support of a project entitled ''Double-Shell Tank (DSV Integrity Project-DST Thermal and Seismic Analyses)''. The overall scope of the project is to complete an up-to-date comprehensive analysis of record of the DST System at Hanford in support of Tri-Party Agreement Milestone M-48-14. The work described herein was performed in support of the seismic analysis of the DSTs. The thermal and operating loads analysis of the DSTs is documented in Rinker et al. (2004). The overall seismic analysis of the DSTs is being performed with the general-purpose finite element code ANSYS'. The global model used for the seismic analysis of the DSTs includes the DST structure, the contained waste, and the surrounding soil. The seismic analysis of the DSTs must address the fluid-structure interaction behavior and sloshing response of the primary tank and contained liquid. ANSYS has demonstrated capabilities for structural analysis, but has more limited capabilities for fluid-structure interaction analysis. The purpose of this study is to demonstrate the capabilities and investigate the limitations of the finite element code MSC.Dytranz for performing a dynamic fluid-structure interaction analysis of the primary tank and contained waste. To this end, the Dytran solutions are benchmarked against theoretical solutions appearing in BNL 1995, when such theoretical solutions exist. When theoretical solutions were not available, comparisons were made to theoretical solutions to similar problems, and to the results from ANSYS simulations. Both rigid tank and flexible tank configurations were analyzed with Dytran. The response parameters of interest that are evaluated in this study are the total hydrodynamic reaction forces, the impulsive and convective mode frequencies, the waste pressures, and slosh

Mathematical Model for Collision-Coalescence Among Inclusions in the Bloom Continuous Caster with M-EMS

Science.gov (United States)

Lei, Hong; Jiang, Jimin; Yang, Bin; Zhao, Yan; Zhang, Hongwei; Wang, Weixian; Dong, Guiwen

2018-04-01

Mathematical simulation is an effective tool to analyze the fluid flow and the inclusion behavior in the bloom continuous caster with mold electromagnetic stirring (M-EMS). The mathematical model is applied to the modeling of magnetic field, flow field, and inclusion field. Due to the introduction of Archimedes force, the collision mechanism and inclusion's slipping velocity should be modified in the inclusion mass and population conservation model. Numerically predicted magnetic field, flow field, and the inclusion spatial distribution conform to the experimental results in the existing literature. Lorentz force plays an important role in the fluid flow, and Archimedes force plays an important role in the inclusion distribution in the continuous caster. Due to Brownian collision, Stokes collision, Archimedes collision, and turbulent collision, the coalescence among inclusions occurs in the bloom continuous caster with M-EMS. Among the four types of collisions, turbulent collision occurs most frequently, followed by Archimedes collision and Stokes collision. The frequency of Brownian collision is several orders of magnitudes smaller and is therefore negligible. The inclusion volume concentration, number density, and characteristic radius exhibit a U-shape in the continuous caster without M-EMS. However, with M-EMS, they exhibit an inverted U-shape.

Heat exchanger with intermediate evaporating and condensing fluid

International Nuclear Information System (INIS)

Fraas, A.P.

1978-01-01

A shell and tube-type heat exchanger, such as a liquid sodium-operated steam generator for use in nuclear reactors, comprises a shell containing a primary fluid tube bundle, a secondary fluid tube bundle at higher elevation, and an intermediate fluid vaporizing at the surface of the primary fluid tubes and condensing at the surface of the secondary fluid tubes

Thermomigration of fluid inclusions in rock salt. Implications for the disposal of nuclear wastes

International Nuclear Information System (INIS)

Noack, W.; Runge, K.

1984-01-01

A mathematical model has been suggested to predict the time-dependent accumulation of brine at nuclear waste packages emplaced in a rock salt repository owing to thermomigration of brine inclusions. The model is based mainly on a description of the migration rate as a function of the temperature, temperature gradient, inclusion size and gas/liquid ratio of inclusions. Other factors are treated merely as disturbing quantities with respect to the migration rate. (author)

Teachers' Views of Inclusion: "I'd Rather Pump Gas."

Science.gov (United States)

Vaughn, Sharon; And Others

The issue of inclusion has been at the forefront of attention in education, and has been widely discussed and debated. Since teachers will be the primary service deliverers of whatever inclusion practices are adopted, this study was conducted in an attempt better to understand teachers' understanding and perceptions of inclusion. Focus group…

Cross-sectional study about primary health care professionals views on the inclusion of the vaccine against human papillomavirus in the vaccine schedules.

Science.gov (United States)

Pérez, M Reyes Oliver; Violeta, Victoria Bravo; Del Campo, Ana Vazquez; Ruiz, Cristina; Castaño, Sonia Yáñez; Conde, Laura P Pérez; López, Jesús S Jiménez

2015-01-01

Although the inclusion of the HPV vaccine has been registered in Spain since 2007, vaccination rates are lower than expected. The patients wish to be vaccinated is heavily influenced by information they have received from many source. The Knowledge of primary health care professionals affects the information provided to patients and is fundamental in the decision making. The aim of this study is to assess the opinions of primary health care professionals on the vaccine against HPV and their knowledge about HPV infection and its links to with gynecological and oropharyngeal cancer. Cross-sectional study. A 19-item survey was drawn up. It included questions on basic aspects of HPV infection and marketed vaccines, personal opinion about the inclusion in the immunization schedules and their level of prescription and recommendation to patients in their clinical practice. From October 2013 to December 2013, 607 surveys were distributed among 20 primary health centers affiliated to the University Hospital 12 de Octubre. The results were analyzed using SPSS statistical package. One hundred sixty four successfully completed surveys were obtained for analysis. 89 % of the professionals knew about the relationship between HPV infection and cervical cancer, 57.3 % did not know any of the serotypes against which vaccines are targeted; 40.4 % believed that there is insufficient data to support the commercialization of the vaccines. Of these, 65.7 % argue that there is no data of its long-term effectiveness, 13.4 % that there is no data as to its side effects, 13.4 % believed that the cost effectiveness is not worthwhile. There is a strong controversy among health professionals regarding the marketing and inclusion of HPV vaccine in immunization schedules. However, the knowledge of the primary care health professionals on key aspects of infection and vaccine protection are insufficient. The training of professionals in vaccination, cervical pathology and HPV infection

Conditions for inclusive education from the viewpoint of headmasters

Directory of Open Access Journals (Sweden)

Janez Kovač

2017-03-01

Full Text Available The paper presents conditions for inclusive education as perceived by headmaster in Slovenian primary schools. In the theoretical part, we focused on key elements of inclusive schools, i.e. headmasters, teachers and parents of children with special needs. In conclusion, we briefly highlight some theoretical propositions in relation to additional professional support in primary schools. In the empirical part of the paper, we present the results of an online survey conducted among headmasters in Slovenian primary schools. The aim of the survey was, among other things, to find how headmasters perceive conditions for inclusive education – those relating to headmasters themselves, to teachers/professional staff working with students with special needs, and those relating to school as a whole. Here, we also paid our attention to differences regarding the number of children with special needs who are included in regular program with adjusted implementation and additional professional assistance. The obtained results provide an opportunity for assessment of current situation, and for further consideration concerning the development of inclusive education in Slovenia in the future.

Hydrothermal diamond-anvil cell: Application to studies of geologic fluids

Science.gov (United States)

Chou, I.-Ming

2003-01-01

The hydrothermal diamond-anvil cell (HDAC) was designed to simulate the geologic conditions of crustal processes in the presence of water or other fluids. The HDAC has been used to apply external pressure to both synthetic and natural fluid inclusions in quartz to minimize problems caused by stretching or decrepitation of inclusions during microthermometric analysis. When the HDAC is loaded with a fluid sample, it can be considered as a large synthetic fluid inclusion and therefore, can be used to study the PVTX properties as well as phase relations of the sample fluid. Because the HDAC has a wide measurement pressure-temperature range and also allows in-situ optical observations, it has been used to study critical phenomena of various chemical systems, such as the geologically important hydrous silicate melts. It is possible, when the HDAC is combined with synchrotron X-ray sources, to obtain basic information on speciation and structure of metal including rare-earth elements (REE) complexes in hydrothermal solutions as revealed by X-ray absorption fine structure (XAFS) spectra. Recent modifications of the HDAC minimize the loss of intensity of X-rays due to scattering and absorption by the diamonds. These modifications are especially important for studying elements with absorption edges below 10 keV and therefore particularly valuable for our understanding of transport and deposition of first-row transition elements and REE in hydrothermal environments.

Inclusive School Is (Not) Possible--Pupil's Voice

Science.gov (United States)

Pavlovic, Slavica

2016-01-01

Inclusive education has been the focus of a number of research studies in Bosnia and Herzegovina. However, most of the research was based on the teachers and to a lesser extent on parents' attitudes towards inclusive education, while pupils' views and voice were mainly neglected. The core of this paper is survey research on primary school pupils'…

Regular Primary Schoolteachers' Attitudes towards Inclusive Education: A Review of the Literature

Science.gov (United States)

de Boer, Anke; Pijl, Sip Jan; Minnaert, Alexander

2011-01-01

Teachers are seen as key persons to implement inclusive education. Positive attitudes are therefore argued as playing a considerable role in implementing this educational change successfully. The aim of this study is to examine what attitudes teachers hold towards inclusive education, which variables are related to their attitudes and if these…

Stable isotope compositions of quartz pebbles and their fluid inclusions as tracers of sediment provenance: Implications for gold- and uranium-bearing quartz pebble conglomerates

Energy Technology Data Exchange (ETDEWEB)

Vennemann, T.W.; Kesler, S.E.; O' Neil, J.R. (Univ. of Michigan, Ann Arbor (United States))

1992-09-01

Oxygen isotope compositions of pebbles from late Archean to paleo-Proterozoic gold- and/or uranium-bearing oligomictic quartz pebble conglomerates of the Witwatersrand district, South Africa, and Huronian Supergroup, Canada, were determined in an attempt to define the nature of the source terrain. The [delta][sup 18]O values of quartz pebbles within any one sample typically vary by [approximately] 4[per thousand] or more, but occasionally by as much as 8[per thousand], even for adjacent pebbles within the same hand specimen. In addition, adjacent quartz pebbles of widely contrasting [delta][sup 18]O values also preserve distinct isotopic signatures of their fluid inclusions. This overall heterogeneity suggests that the pebbles did not undergo significant oxygen isotope exchange after incorporation in the conglomerates. Therefore, oxygen isotope analyses of such quartz pebbles, in combination with a detailed investigation of their mineral and fluid inclusions, can provide a useful method for characterizing pebble populations and hence dominant sediment source modes. Comparison of values found in this study with [delta][sup 18]O values of quartz from Archean granites, pegmatites, and mesothermal greenstone gold veins, i.e., [delta][sup 18]O values of sources commonly proposed for the conglomerate ores, suggests that uranium is derived from a granitic source, whereas gold has a mesothermal greenstone gold source. Low [delta][sup 18]O values of chert pebbles (9[per thousand] to 11.5[per thousand]) relative to those expected for Archean and Proterozoic marine cherts (commonly [ge] 17[per thousand]) effectively exclude marine cherts, and therefore, auriferous iron formations and exhalatives, as likely sources of gold.

Stable isotope compositions of quartz pebbles and their fluid inclusions as tracers of sediment provenance: Implications for gold- and uranium-bearing quartz pebble conglomerates

International Nuclear Information System (INIS)

Vennemann, T.W.; Kesler, S.E.; O'Neil, J.R.

1992-01-01

Oxygen isotope compositions of pebbles from late Archean to paleo-Proterozoic gold- and/or uranium-bearing oligomictic quartz pebble conglomerates of the Witwatersrand district, South Africa, and Huronian Supergroup, Canada, were determined in an attempt to define the nature of the source terrain. The δ 18 O values of quartz pebbles within any one sample typically vary by ∼ 4 per-thousand or more, but occasionally by as much as 8 per-thousand, even for adjacent pebbles within the same hand specimen. In addition, adjacent quartz pebbles of widely contrasting δ 18 O values also preserve distinct isotopic signatures of their fluid inclusions. This overall heterogeneity suggests that the pebbles did not undergo significant oxygen isotope exchange after incorporation in the conglomerates. Therefore, oxygen isotope analyses of such quartz pebbles, in combination with a detailed investigation of their mineral and fluid inclusions, can provide a useful method for characterizing pebble populations and hence dominant sediment source modes. Comparison of values found in this study with δ 18 O values of quartz from Archean granites, pegmatites, and mesothermal greenstone gold veins, i.e., δ 18 O values of sources commonly proposed for the conglomerate ores, suggests that uranium is derived from a granitic source, whereas gold has a mesothermal greenstone gold source. Low δ 18 O values of chert pebbles (9 per-thousand to 11.5 per-thousand) relative to those expected for Archean and Proterozoic marine cherts (commonly ≥ 17 per-thousand) effectively exclude marine cherts, and therefore, auriferous iron formations and exhalatives, as likely sources of gold

Social dimensions of inclusion in education of 4th and 7th grade pupils in inclusive and regular classes: Outcomes from Austria.

Science.gov (United States)

Schwab, Susanne

2015-01-01

Positive peer relationships play a significant role in the development of students. They are beneficial for learning and psychological outcomes. This article draws upon an important distinction between the four main themes of social participation (friendships, interactions, peer acceptance and self-perception of social participation) and examines these aspects in inclusive and regular classes. Especially, differences in social participation of students with and without special educational needs (SEN) in inclusive classes and between students without SEN in inclusive and regular classes are examined. In this study, data from 1115 pupils in primary and secondary schools in Austria were analysed, of which 129 were diagnosed as having SEN. The results showed that in inclusive classes, students with SEN had lower scores on all four subthemes of social participation (friendships, interactions, peer acceptance and self-perception of social integration) than students without SEN. Regarding students without SEN, friendships and peer acceptance were significantly higher in inclusive classes than in regular classes. Differences were neither found for gender, nor between primary and secondary school students. Copyright © 2015 Elsevier Ltd. All rights reserved.

Noble gas and halogen constraints on fluid sources in iron oxide-copper-gold mineralization: Mantoverde and La Candelaria, Northern Chile

Science.gov (United States)

Marschik, Robert; Kendrick, Mark A.

2015-03-01

The noble gas (Ar, Kr, Xe) and halogen (Cl, Br, I) composition of fluid inclusions in hydrothermal quartz and calcite related to the hypogene iron oxide-copper-gold (IOCG) mineralization at Mantoverde and Candelaria, Chile, have been investigated to provide new insights of fluid and salinity sources in Andean IOCG deposits. A combination of mechanical extraction by crushing and thermal decrepitation methods was applied and collectively indicate that fluid inclusions with salinities ranging from 3.4 up to 64 wt% NaCl equivalent have molar Br/Cl and I/Cl ratios of between 0.5 × 10-3 and 3.0 × 10-3 and I/Cl of between 8 × 10-6 and 25 × 10-6 in the majority of samples, with maximum values of 5.2 × 10-3 obtained for Br/Cl and 64 × 10-6 for I/Cl in fluid inclusions within individual samples. The fluid inclusions have age-corrected 40Ar/36Ar ratios ranging from the atmospheric value of 296 up to 490 ± 45, indicating the presence of crustal- or mantle-derived excess 40Ar in the fluid inclusions of most samples. The fluid inclusions have 84Kr/36Ar and 130Xe/36Ar ratios intermediate of air and air-saturated water. However, 40Ar/36Ar is not correlated with either 84Kr/36Ar or 130Xe/36Ar, and the fluid inclusion 36Ar concentrations of 0.2-3.5 × 10-10 mol/g (calculated from measured Cl/36Ar and thermometric salinity measurements) extend below the seawater value of 0.34 × 10-10 mol/g, suggesting that contamination with modern air is a minor artifact. The range of fluid inclusion Br/Cl and I/Cl ratios overlap those previously documented for the mantle and magmatic-hydrothermal ore deposits, and the fluids' unusually low 36Ar concentration is consistent with the involvement of magmatic-hydrothermal fluids. Input of additional non-magmatic fluid components is suggested by the spread in Br/Cl and I/Cl to values characteristic of bittern brine sedimentary formation waters and near atmospheric 40Ar/36Ar. These data are compatible with mixing of magmatic-hydrothermal fluids

Fluid mixing and ore deposition during the geodynamic evolution of the Sierra Almagrera (Betics, Spain)

Science.gov (United States)

Dyja, Vanessa; Tarantola, Alexandre; Hibsch, Christian; Boiron, Marie-Christine; Cathelineau, Michel

2013-04-01

recrystallization of the original quartz grains during transposition. The second fluid type is characterized by very low salinity inclusions (1.2 wt.% NaCl) found in veins discordant to the foliation (Vβ), and precedes brines (23 wt. % NaCl + CaCl2 with Th of 320 °C) trapped in transgranular fluid inclusion planes (FIP). The NW-SE to N-S directions of these FIP appears coherent with shortening directions related to Tortonian and Messinian basin development (Montenat, 1990). The halogen signatures of the latest brines confirm that they derive from primary brines issued from sea water evaporation. Fluid inclusions in barites and siderites from (Vγ) veins display a Br/Cl ratio more typical of secondary brines and a rather large range of salinities, this indicating distinct fluid movements and the dissolution of evaporates by dilute fluids may be of meteoric origin. Fluids in siderites show the lowest trapping temperature conditions around 190 °C. The existence of a sea water component in fluids was previously mentioned by Morales Ruano et al. (1995) indicate a δ34S of 22,1-23.9 ‰ for barite from Sierra Almagrera. In conclusion, during the Neogene multistage evolution of the Almagrera MCC, fluids of different origins e.g. basinal, meteoric and metamorphic fluids have circulated within the crust, and locally interacted with evaporites. The resulting brines formed Fe-(Ba, Pb, Cu) ores in discontinuities affecting both the metamorphic and sedimentary rocks. Morales Ruano, S., Both, R., and Fenoll Hach-Ali, P., 1995, Fluid evolution and mineral deposition in the Aguilas - Sierra Almagrera base metal ores, southeastern Spain.: Mineral Deposits, p. 365-368. Montenat, C., 1990, Les Bassins néogènes du domaine bétique oriental (Espagne), Documents et Travaux IGAL n°12-13, 392 p.

A potential new proxy for paleo-atmospheric pO2 from soil carbonate-hosted fluid inclusions applied to pristine Chinle soils from the Petrified Forest 1A core

Science.gov (United States)

Schaller, M. F.; Pettitt, E.; Knobbe, T.

2017-12-01

Proxies for the concentration of O2 in the ancient atmosphere are scarce. We have developed a potential new proxy for ancient atmospheric O2 content based on soil carbonate-hosted fluid inclusions. Soils are in continuous atmospheric communication, and relatively static equilibration between soil gas and atmospheric gas during formation, such that a predictable amount of atmosphere infiltrates a soil. This atmosphere is trapped by inclusions during carbonate precipitation. Here we show that carbonate hosted fluid inclusions are faithful recorders of soil gas concentrations and isotope ratios, and specifically that soil O2 partial pressures can be derived from the total gas contents of these inclusions. Using carbonate nodules from a span of depths in a modern vertisol near Dallas, TX, as a test case, we employ an online crushing technique to liberate gases from soil carbonates into a small custom-built quadrupole mass spectrometer where all gases are measured in real time. We quantify the total oxygen content of the gas using a matrix-matched calibration, and define each species as a partial pressure of the total gas released from the nodule. Atmospheric pO2 is very simply derived from the soil-nodule partial pressures by accounting for the static productivity of the soil (using a small correction based on the CO2 concentration). When corrected for aqueous solubility using Henry's Law, these soil-carbonate hosted gas results reveal soil O2 concentrations that are comparable to modern-day dry atmosphere. Armed with this achievement in modern soils, and as a test on the applicability of the approach to ancient samples, we successfully apply the new proxy to nodules from the Late Triassic Chinle formation from the Petrified Forest National Park Core, taken as part of the Colorado Plateau Coring Project. Analysis of soil O2 from soil gas monitoring wells paired with measurements from contemporaneous soil carbonate nodules is needed to precisely calibrate the new proxy.

Reclaiming Teacher Intellectualism through and for Inclusive Education

Science.gov (United States)

Schlessinger, Sarah L.

2018-01-01

Inclusive education, understood as a pedagogical commitment to schooling experiences that value diversity and promote equitable participation for all students, has not been broadly taken up in practice in the United States. Much of the research in this field suggests that teachers' attitudes towards inclusive education are the primary barrier to…

Gold in primary high thermal transformations of the Au porphyry deposit Biely vrch

International Nuclear Information System (INIS)

Kozak, J.; Kodera, P.; Lexa, J.; Chovan, M.

2014-01-01

Porphyry gold deposit Biely vrch is situated in northern part of the Javorie stratovolcano in eastern part of Central Slovakia Volcanic Field. Intrusion of diorite to andesite porphyry with andesites is affected by hydrothermal alterations with dominant intermediate argillic alteration. Accumulations of gold are spatially associated with stockwork, formed by different types of quartz veinlets. Gold grains occur in altered rocks in the vicinity of quartz veinlets and rarely also as inclusions in vein. Analysed gold grains are chemically very homogenous and have fineness between 87 to 99.50 wt % Au while silver is the only significant element in addition to gold. In deeper parts of the deposit gold also occurs associated with K and Ca-Na silicate alteration which confirms precipitation of gold already in early stages of the hydrothermal system from high salinity Fe-K rich salt melt based on analyses of corresponding fluid inclusions. Difference in the fineness of gold is not significant between primary and secondary hydrothermal alterations. The highest fineness of gold (more than 99 wt %) in advanced argillic alteration is probably caused by remobilisation by acidic hydrothermal fluids. (authors)

Training, Understanding, and the Attitudes of Primary School Teachers Regarding Inclusive Education in Hong Kong

Science.gov (United States)

Leung, Chi-hung; Mak, Kit-ying

2010-01-01

Inclusive education is one of the most important issues in education in Hong Kong, China. Because the role of teachers is critical to the success of inclusive education, this study investigated some of the elements that determine the success of implementing inclusive education. Teachers' perceived definition of inclusive education, the…

Mechanism of chain formation in nanofluid based MR fluids

International Nuclear Information System (INIS)

Patel, Rajesh

2011-01-01

Mechanism of structure formation in bidispersed colloids is important for its physical and optical properties. It is microscopically observed that the mechanism of chain formation in magnetic nanofluid based magnetorheological (MR) fluid is quite different from that in the conventional MR fluid. Under the application of magnetic field the magnetic nanoparticles are filled inside the structural microcavities formed due to the association of large magnetic particles, and some of the magnetic nanoparticles are attached at the end of the chains formed by the large particles. The dipolar energy of the large particles in a magnetic nanofluid matrix becomes effective magnetic permeability (μ eff ) times smaller than that of the neutral medium. Inclusion of magnetic nanoparticles (∼10 nm) with large magnetic particles (∼3-5 μm) restricts the aggregation of large particles, which causes the field induced phase separation in MR fluids. Hence, nanofluid based MR fluids are more stable than conventional MR fluids, which subsequently increase their application potentiality. - Research highlights: → In bidispersed magnetic colloids nanoparticles are attached at the end of the chains formed by the large particles. → Inclusion of magnetic nanoparticles (∼10 nm) with large magnetic particles (∼3-5 m) restricts the aggregation of large particles. → Nanofluid based MR fluids are more stable than conventional MR fluids.

Hydrogen study in melt inclusions trapped in quartz with nuclear microprobe

International Nuclear Information System (INIS)

Mosbah, M.; Tirira, J.; Gosset, J.; Massiot, P.

1990-01-01

Elastic recoil spectrometry induced by 3 MeV helium-4 microbeam has been used to determine hydrogen distribution within melt inclusions trapped in quartz. These minerals were selected from different geological environments: Guadeloupe (West Indies), Pantelleria Island (South Sicily - Italy) and San Pietro (South Sardinia - Italy). Bulk hydrogen contents are calculated (H assumed to be in H 2 O form). The knowledge of hydrogen distribution assists both in a better understanding and in the establishment of volcanic dynamism hypotheses. Finally, fluid hydrogen rich inclusions are evidenced and H concentration profile is simulated and reported for the first time in glass inclusion

Formation of non-metallic inclusions and the possibility of their removal during ingot casting

OpenAIRE

Ragnarsson, Lars

2010-01-01

The present study was carried out to investigate the formation and evolution of non-metallic inclusions during ingot casting. Emphasize have been on understanding the types of inclusions formed and developed through the casting process and on the development of already existing inclusions carried over from the ladle during casting. Industrial experiments carried on at Uddeholm Tooling together with laboratory work and Computational Fluid Dynamics (CFD) simulations. Ingots of 5.8 tons have bee...

Metamorphic P-T conditions and CO2 influx history of medium-grade metapelites from Karakorum, Trans-Himalaya, India

Science.gov (United States)

Sachan, Himanshu K.; Santosh, M.; Prakash, Divya; Kharya, Aditya; Chandra Singh, P.; Rai, Santosh K.

2016-07-01

The medium grade metapelites of Pangong-Tso area in the trans-Himalayan region underwent sillimanite-grade metamorphism initiated during the Cretaceous, associated with the collision of the Kohistan arc and the Indian plate with Asia. This paper present results from a petrological and fluid inclusion study to understand the metamorphic P-T conditions and fluid history of these rocks. The calculated phase equilibria in the Na2O-CaO-K2O-FeO-MgO-MnO-Al2O3-SiO2-H2O-TiO2 (NCKFMMnASHT) system suggest P-T conditions of 8 kbar and 650 °C for the peak metamorphic event. Primary fluid inclusions occur in staurolite and garnet, whereas quartz carries mostly secondary fluid inclusions. The trapped fluids in primary inclusions show initial melting temperatures in the range of -56.9 to -56.6 °C, suggesting nearly pure CO2 composition. The secondary fluids are of mixed carbonic-aqueous nature. The re-equilibrated inclusions show annular morphology as well as necking phenomena. The CO2 isochores for the primary inclusions indicate pressures of 6.1-6.7 kbar, suggesting that the CO2-rich fluids were trapped during post-peak exhumation of the rocks, or that synmetamorphic carbonic fluids underwent density reversal during isothermal decompression. The secondary CO2-H2O fluids must have been trapped during the late exhumation stage, as their isochores define further lower pressures of 4.8 kbar. The morphology of re-equilibrated fluid inclusions and the rapid decrease in pressure are consistent with a near-isothermal decompression trajectory following the peak metamorphism. The carbonic fluids were probably derived locally from decarbonation reactions of the associated carbonate rocks during metamorphism or from a deep-seated reservoir through Karakorum fault.

Inclusive Education Policies: Discourses of Difference, Diversity and Deficit

Science.gov (United States)

Hardy, Ian; Woodcock, Stuart

2015-01-01

This paper provides an analysis of inclusive education policies across international, and Anglo-American national and provincial/state jurisdictions to reveal how policies discursively construct inclusion under current, increasingly neoliberal conditions. In making this case, the paper draws upon primary UNESCO and Organisation for Economic…

Bandgap calculation of two-dimensional mixed solid-fluid phononic crystals by Dirichlet-to-Neumann maps

International Nuclear Information System (INIS)

Li Fenglian; Wang Yuesheng; Zhang Chuanzeng

2011-01-01

A numerical method based on the Dirichlet-to-Neumann (DtN) map is presented to compute the bandgaps of two-dimensional phononic crystals, which are composed of square or triangular lattices of circular solid cylinders in a fluid matrix. The DtN map is constructed using the cylindrical wave expansion in a unit cell. A linear eigenvalue problem, which depends on the Bloch wave vector and involves relatively small matrices, is formulated. Numerical calculations are performed for typical systems with various acoustic impedance ratios of the solid inclusions and the fluid matrix. The results indicate that the DtN-map based method can provide accurate results for various systems efficiently. In particular it takes into account the fluid-solid interface conditions and the transverse wave mode in the solid component, which has been proven to be significant when the acoustic impedance of the solid inclusions is close to or smaller than that of the fluid matrix. For systems with an acoustic impedance of the inclusion much less than that of the matrix, physical flat bands appear in the band structures, which will be missed if the transverse wave mode in the solid inclusions is neglected.

Regular primary school teachers’ attitudes towards inclusive education : A review of the literature

NARCIS (Netherlands)

de Boer, Anke; Pijl, Sip-Jan; Minnaert, Alexander

2011-01-01

Teachers are seen as key persons to implement inclusive education. Positive attitudes are therefore argued as playing a considerable role in implementing this educational change successfully. The aim of this study is to examine what attitudes teachers hold towards inclusive education, which

3D imaging of vapour and liquid inclusions from the Mole Granite, Australia, using helical fluorescence tomography

Energy Technology Data Exchange (ETDEWEB)

Cauzid, J. [European Synchrotron Radiation Facility, 6 rue Jules Horowitz, BP 220, 38043 Grenoble Cedex (France)], E-mail: jean.cauzid@esrf.fr; Philippot, P. [Geobiosphere Actuelle et Primitive, Institut de Physique du Globe de Paris, CNRS and Universite Denis Diderot, Case 89, 4 place Jussieu, 75252 Paris Cedex 05 (France); Bleuet, P. [European Synchrotron Radiation Facility, 6 rue Jules Horowitz, BP 220, 38043 Grenoble Cedex (France); Simionovici, A. [Laboratoire de Geophysique Interne et Tectonophysique, BP 53, 38041 Grenoble Cedex 9 (France); Somogyi, A. [Synchrotron Soleil, DiffAbs beamline, Saint-Aubin, BP 48, 91192 Gif-sur-Yvette Cedex (France); Golosio, B. [Instituto di Matematica e Fisica, Universita di Sassari, 2 via Vienna, 07100 Sassari (Italy)

2007-08-15

World class Cu resources are concentrated in porphyry and epithermal ore deposits. Their formation remains partially understood, however, due to a lack of constraints on the partitioning properties of trace elements in general, and Cu in particular, between vapour and liquid phases evolved from boiling fluids at depth in the Earth's crust. Immiscible liquid and vapour fluid inclusions coexisting in a single quartz grain have been imaged in three dimensions by X-ray Fluorescence Computed Tomography (XFCT). Elemental spatial distributions confirm that Cu, and to a lesser extent As, partition into the vapour phase, whereas Mn, Fe, Zn, Br, Rb, Sr and Pb concentrate in the liquid inclusion. High resolution mapping of the vapour inclusions revealed that Cu is heterogeneously distributed at the scale of a single inclusion and is mostly concentrated as tiny daughter crystals.

3D imaging of vapour and liquid inclusions from the Mole Granite, Australia, using helical fluorescence tomography

Science.gov (United States)

Cauzid, J.; Philippot, P.; Bleuet, P.; Simionovici, A.; Somogyi, A.; Golosio, B.

2007-08-01

World class Cu resources are concentrated in porphyry and epithermal ore deposits. Their formation remains partially understood, however, due to a lack of constraints on the partitioning properties of trace elements in general, and Cu in particular, between vapour and liquid phases evolved from boiling fluids at depth in the Earth's crust. Immiscible liquid and vapour fluid inclusions coexisting in a single quartz grain have been imaged in three dimensions by X-ray Fluorescence Computed Tomography (XFCT). Elemental spatial distributions confirm that Cu, and to a lesser extent As, partition into the vapour phase, whereas Mn, Fe, Zn, Br, Rb, Sr and Pb concentrate in the liquid inclusion. High resolution mapping of the vapour inclusions revealed that Cu is heterogeneously distributed at the scale of a single inclusion and is mostly concentrated as tiny daughter crystals.

TEACHERS’ COMPREHENSIONS, PERCEPTIONS, AND ATTITUDES TOWARDS INCLUSIVE EDUCATION

Directory of Open Access Journals (Sweden)

Ruwandi Ruwandi

2012-12-01

Elementary School Teachers (MI in Salatiga to inclusive education; 2 their perceptions; and 3 their attitudes to the inclusive education. This is a survey research. The primary data collection method used in this research was questionnaires, besides structural interviews. Based upon the calculation of the questionnaires, the writer found out that 1 the teachers’ comprehension to inclusive education is still low (88.1 % and only 4.7 % feels having a little knowledge about it. In addition, 50.02 % have negative perceptions, and are only 21.46 % who have positive perceptions to it. Even though, 43.89 % have positive attitudes and 37.81 have negative attitudes to the inclusive education.

Fluid-mediated redox transfer in subduction zones: Measuring the intrinsic fO2 of slab fluids in the lab

Science.gov (United States)

Iacovino, K.; Till, C. B.

2017-12-01

It is widely observed that arc magmas are the most oxidized magmas on Earth. One frequently cited explanation calls on the flux of aqueous fluid from the highly oxidized down-going slab to catalyze sub-arc mantle melting and impose a highly oxidized redox signature on the mantle wedge. Fluid inclusions from sub-arc mantle xenoliths provide evidence that "slab fluids" may be highly oxidizing (fO2 QFM+1.5; Brandon & Draper, 1996; Frost and Ballhaus, 1998), but for decades, determination of the precise reactive mechanism potentially responsible for the transfer of O2 from slab to mantle has been elusive. Pure H2O has been shown to have insufficient oxidizing capacity to affect mantle redox, but H2O-rich fluids may facilitate the mobilization of Fe3+ or other multivalent cations and/or O2 transfer via the reduction of sulfate, particularly if such fluids are hypersaline. Here we present the first results from experiments designed to investigate fluid-mediated element transfer, including redox reactions, at the slab-mantle interface. These data include the first direct measurements of the intrinsic oxygen fugacity of fluids released during slab dehydration using sliding binary alloy redox sensors. Experiments were performed on natural Fe3+-bearing antigorite serpentinite at 1-2 GPa and 800°C in a piston cylinder at Arizona State University, analogous to conditions in a subducting slab and sufficient to cause the breakdown of starting material into forsteritic olivine, Mg-rich clinopyroxene, magnetite, and aqueous fluid. Experimental time series allow for the detection of (and correction for) any buffering effect on the sample by the experimental assembly. Initial results indicate that the dehydration of sulfur-free antigorite serpentinite can generate fluids with fO2 several orders of magnitude above that of MORB mantle and similar to those observed in natural sub-arc fluid inclusions. Careful measurements of the chemistry of fluid and solid run products will elucidate

Hydrocarbon migration and accumulation in the Upper Cretaceous Qingshankou Formation, Changling Sag, southern Songliao Basin: Insights from integrated analyses of fluid inclusion, oil source correlation and basin modelling

Science.gov (United States)

Dong, Tian; He, Sheng; Wang, Dexi; Hou, Yuguang

2014-08-01

The Upper Cretaceous Qingshankou Formation acts as both the source and reservoir sequence in the Changling Sag, situated in the southern end of the Songliao Basin, northeast China. An integrated approach involving determination of hydrocarbon charging history, oil source correlation and hydrocarbon generation dynamic modeling was used to investigate hydrocarbon migration processes and further predict the favorable targets of hydrocarbon accumulations in the Qingshankou Formation. The hydrocarbon generation and charge history was investigated using fluid inclusion analysis, in combination with stratigraphic burial and thermal modeling. The source rocks began to generate hydrocarbons at around 82 Ma and the hydrocarbon charge event occurred from approximately 78 Ma to the end of Cretaceous (65.5 Ma) when a large tectonic uplift took place. Correlation of stable carbon isotopes of oils and extracts of source rocks indicates that oil was generated mainly from the first member of Qingshankou Formation (K2qn1), suggesting that hydrocarbon may have migrated vertically. Three dimensional (3D) petroleum system modeling was used to evaluate the processes of secondary hydrocarbon migration in the Qingshankou Formation since the latest Cretaceous. During the Late Cretaceous, hydrocarbon, mainly originated from the Qianan depression, migrated laterally to adjacent structural highs. Subsequent tectonic inversion, defined as the late Yanshan Orogeny, significantly changed hydrocarbon migration patterns, probably causing redistribution of primary hydrocarbon reservoirs. In the Tertiary, the Heidimiao depression was buried much deeper than the Qianan depression and became the main source kitchen. Hydrocarbon migration was primarily controlled by fluid potential and generally migrated from relatively high potential areas to low potential areas. Structural highs and lithologic transitions are potential traps for current oil and gas exploration. Finally, several preferred hydrocarbon

Rheological Properties of Quasi-2D Fluids in Microgravity

Science.gov (United States)

Stannarius, Ralf; Trittel, Torsten; Eremin, Alexey; Harth, Kirsten; Clark, Noel; Maclennan, Joseph; Glaser, Matthew; Park, Cheol; Hall, Nancy; Tin, Padetha

2015-01-01

In recent years, research on complex fluids and fluids in restricted geometries has attracted much attention in the scientific community. This can be attributed not only to the development of novel materials based on complex fluids but also to a variety of important physical phenomena which have barely been explored. One example is the behavior of membranes and thin fluid films, which can be described by two-dimensional (2D) rheology behavior that is quite different from 3D fluids. In this study, we have investigated the rheological properties of freely suspended films of a thermotropic liquid crystal in microgravity experiments. This model system mimics isotropic and anisotropic quasi 2D fluids [46]. We use inkjet printing technology to dispense small droplets (inclusions) onto the film surface. The motion of these inclusions provides information on the rheological properties of the films and allows the study of a variety of flow instabilities. Flat films have been investigated on a sub-orbital rocket flight and curved films (bubbles) have been studied in the ISS project OASIS. Microgravity is essential when the films are curved in order to avoid sedimentation. The experiments yield the mobility of the droplets in the films as well as the mutual mobility of pairs of particles. Experimental results will be presented for 2D-isotropic (smectic-A) and 2D-nematic (smectic-C) phases.

Implementing Inclusive Education in Primary Schools in Bangladesh: Recommended Strategies

Science.gov (United States)

Ahmmed, Masud; Mullick, Jahirul

2014-01-01

Continued discrimination towards, and exclusion of, children with special needs, combined with the high dropout rate of students from socio-economically disadvantaged backgrounds, creates considerable pressure on the inclusive education (IE) reform initiatives of developing countries. To minimise the challenges to implementing IE reform policies…

CO2-rich and CO2-poor ore-forming fluids of porphyry molybdenum systems in two contrasting geologic setting: evidence from Shapinggou and Zhilingtou Mo deposits, South China

Science.gov (United States)

Ni, P.

2017-12-01

Porphyry deposits are the world most important source of Mo, accounting for more than 95% of world Mo production. Porphyry Mo deposits have been classified into Climax type and Endako type. The Climax type was generally formed in an intra-continental setting, and contain high contents of Mo (0.15-0.45 wt.%) and F (0.5-5 wt.%). In contrast, the Endako type was generated in a continental arc setting and featured by low concentrations of Mo (0.05-0.15 wt.%) and F (0.05-0.15 wt.%). The systematic comparison of ore fluids in two contrasting tectonic environments is still poorly constrained. In this study, the Shapinggou and Zhilingtou Mo deposits in South China were selected to present the contrasting ore-forming fluid features. The fluid inclusion study of Shapinggou Mo deposit suggest: Early barren quartz veins contain fluid inclusions with salinities of 7.9-16.9 wt% NaCl equiv . CO2 contents are high enough to be detected by Raman. Later molybdenite-quartz veins contain vapor-type fluid inclusions with lower salinities (0.1-7.4 wt% NaCl equiv) but higher CO2-contents, coexisting with brine inclusions with 32.9-50.9 wt% NaCl equiv. The fluid inclusion study on Zhilintou Mo deposit suggest : Early barren quartz veins contain mostly intermediate density fluid inclusions with salinities of 5.3-14.1 wt% NaCl equiv, whereas main-stage quartz-molybdenite veins contain vapor-rich fluid inclusions of 0.5-6.2 wt% NaClequiv coexisting with brine inclusions of 38.6-44.8 wt% NaCl equiv. In contrast to the Shapinggou Mo deposit, the fluid inclusions at Shizitou contain only minor amounts of CO2. This study suggests the two porphyry molybdenum deposits experienced a similar fluid evolution trend, from single-phase fluids at the premineralization stage to two-phase fluids at the mineralization stage. Fluid boiling occurred during the ore stage and probably promoted a rapid precipitation of molybdenite. Intensive phyllic alteration, CO2-poor ore-forming fluids, and continental arc

Corporal Punishment in the Schools of Ghana: Does Inclusive Education Suffer?

Science.gov (United States)

Agbenyega, Joseph S.

2006-01-01

This paper reports on a study that compared the practice of corporal punishment in ten basic schools in the Greater Accra District in Ghana. Five of the ten schools were designated as inclusive project schools (IPS) and the other five as non-inclusive project schools (NIS). The primary purpose was to find out if the inclusive project schools were…

About one discrete model of splitting by the physical processes of a piezoconductive medium with gas hydrate inclusions

Science.gov (United States)

Poveshchenko, Yu A.; Podryga, V. O.; Rahimly, P. I.; Sharova, Yu S.

2018-01-01

The thermodynamically equilibrium model for splitting by the physical processes of a two-component three-phase filtration fluid dynamics with gas hydrate inclusions is considered in the paper, for which a family of two-layer completely conservative difference schemes of the support operators method with time weights profiled in space is constructed. On the irregular grids of the theory of the support-operators method applied to the specifics of the processes of transfer of saturations and internal energies of water and gas in a medium with gas hydrate inclusions, methods of directwind approximation of these processes are considered. These approximations preserve the continual properties of divergence-gradient operations in their difference form and are related to the velocity field providing saturations transfer and internal energies of fluids. Fluid dynamics with gas hydrate inclusions are also calculated on the basis of the proposed approach, in particular, in areas of severe pressure depression in the collector space.

Volatile and light lithophile elements in high-anorthite plagioclase-hosted melt inclusions from Iceland

Science.gov (United States)

Neave, David A.; Hartley, Margaret E.; Maclennan, John; Edmonds, Marie; Thordarson, Thorvaldur

2017-05-01

Melt inclusions formed during the early stages of magmatic evolution trap primitive melt compositions and enable the volatile contents of primary melts and the mantle to be estimated. However, the syn- and post-entrapment behaviour of volatiles in primitive high-anorthite plagioclase-hosted melt inclusions from oceanic basalts remains poorly constrained. To address this deficit, we present volatile and light lithophile element analyses from a well-characterised suite of nine matrix glasses and 102 melt inclusions from the 10 ka Grímsvötn tephra series (i.e., Saksunarvatn ash) of Iceland's Eastern Volcanic Zone (EVZ). High matrix glass H2O and S contents indicate that eruption-related exsolution was arrested by quenching in a phreatomagmatic setting; Li, B, F and Cl did not exsolve during eruption. The almost uniformly low CO2 content of plagioclase-hosted melt inclusions cannot be explained by either shallow entrapment or the sequestration of CO2 into shrinkage bubbles, suggesting that inclusion CO2 contents were controlled by decrepitation instead. High H2O/Ce values in primitive plagioclase-hosted inclusions (182-823) generally exceed values expected for EVZ primary melts (∼ 180), and can be accounted for by diffusive H2O gain following the entrainment of primitive macrocrysts into evolved and H2O-rich melts a few days before eruption. A strong positive correlation between H2O and Li in plagioclase-hosted inclusions suggests that diffusive Li gain may also have occurred. Extreme F enrichments in primitive plagioclase-hosted inclusions (F/Nd = 51-216 versus ∼15 in matrix glasses) possibly reflect the entrapment of inclusions from high-Al/(Al + Si) melt pools formed by dissolution-crystallisation processes (as indicated by HFSE depletions in some inclusions), and into which F was concentrated by uphill diffusion since F is highly soluble in Al-rich melts. The high S/Dy of primitive inclusions (∼300) indicates that primary melts were S-rich in comparison

The Bairendaba silver polymetallic deposit in Inner Mongolia, China: characteristics of ore-forming fluid and genetic type of ore deposit

Science.gov (United States)

Wang, Ying; Xie, Yuling; Wu, Haoran

2018-02-01

Bairendaba silver-polymetallic deposit is located in the middle south of the Xing Meng orogenic belt, and in the silver-polymetallic metallogenic belt on the west slope of the southern of Great Xing’an Range. Based on studying of the fluid inclusion, we discuss the characteristics of ore-forming fluid and the metallic genesis of the Bairendaba silver-polymetallic deposit. By means of the analysis of the fluid inclusions, homogenization temperature, salinity and composition were studied in quartz and fluorite. The result is as the follows: with homogenization temperatures of fluid inclusions in quartz veins being 196∼312 °C, the average 244.52 °C, and fluid salinity 2.90∼9.08 wt%NaCl; with homogenization temperatures of fluid inclusions in fluorite being 127∼306 °C, the average 196.92 °C, and fluid salinity 2.90∼9.34 wt% NaCl. The ore-forming fluid is mainly composed of water and the gas. The results of laser Raman analysis show that the gas phase is mainly CH4. It shows that the ore-forming fluid is characterized by medium-low temperature and low-salinity system. The temperature of ore-forming fluid is from high to low, and the salinity from high to low, and the meteoric water or metamorphic water is added during deposit. According to the geological characteristics of the mining area, it is considered that the genetic type of the ore deposit should be the fault-controlled and the medium-low temperature hydrothermal deposit related to magmatic hydrothermal activities.

INCLUSIVE EDUCATION SUPPORTING CHILDREN WITH BEHAVIORAL PROBLEMS AND THEIR REFERENCE PERSONS IN LOWER PRIMARY SCHOOL (GRADES 1-3

Directory of Open Access Journals (Sweden)

Ulrike BECKER

2014-03-01

Full Text Available Background: in Germany we may state that despite all efforts of inclusive education there is a tendency towards segregated education as far as “Emotional and Social Development” is concerned. In Berlin, the “Transition” project could be developed. By the help of this support approach it was possible all participating children to stay at their primary schools. Aims: the survey was meant to find out in which way the support, in context of the “Transition” project, has contributed to successful inclusive learning of students with considerable problems in their social behaviour. Methods:a semi-standardized questionnaire for interviewing class teachers of regular school classes was used, and furthermore school certificates were assessed concerning regular school attendance as well as performance in Mathematics and German. Nine Berlin schools took part in the survey. The response rate was 96%. Results: the current survey shows that inclusive education in case of considerable problems in social behaviour may be successful by counselling parents and teachers, by cooperation with school and by youth aid, as well as by way of a temporary learning group relieving both students with difficult behaviour as well as the overall group and the teachers, one succeeds with practicing recognition and acceptance, even despite serious behavioural problems at school. Conclusion: the results clearly show that the teacher - student interaction and the student - student interaction improves significantly in the subjective perception of class teachers. For this relationship to work, all those participating in it need “a specific environment”.

Effective medium of periodic fluid-solid composites

KAUST Repository

Mei, Jun; Wu, Ying; Liu, Zhengyou

2012-01-01

An analytic solution of the effective mass density and bulk modulus of a periodic fluid-solid composite is obtained by using the multiple-scattering theory in the long-wavelength limit. It is shown that when the concentration of solid inclusions

Numerical Simulations of Inclusion Behavior in Gas-Stirred Ladles

Science.gov (United States)

Lou, Wentao; Zhu, Miaoyong

2013-06-01

A computation fluid dynamics-population balance model (CFD-PBM) coupled model has been proposed to investigate the bubbly plume flow and inclusion behavior including growth, size distribution, and removal in gas-stirred ladles, and some new and important phenomena and mechanisms were presented. For the bubbly plume flow, a modified k- ɛ model with extra source terms to account for the bubble-induced turbulence was adopted to model the turbulence, and the bubble turbulent dispersion force was taken into account to predict gas volume fraction distribution in the turbulent gas-stirred system. For inclusion behavior, the phenomena of inclusions turbulent random motion, bubbles wake, and slag eye forming on the molten steel surface were considered. In addition, the multiple mechanisms both that promote inclusion growth due to inclusion-inclusion collision caused by turbulent random motion, shear rate in turbulent eddy, and difference inclusion Stokes velocities, and the mechanisms that promote inclusion removal due to bubble-inclusion turbulence random collision, bubble-inclusion turbulent shear collision, bubble-inclusion buoyancy collision, inclusion own floatation near slag-metal interface, bubble wake capture, and wall adhesion were investigated. The importance of different mechanisms and total inclusion removal ratio under different conditions, and the distribution of inclusion number densities in ladle, were discussed and clarified. The results show that at a low gas flow rate, the inclusion growth is mainly attributed to both turbulent shear collision and Stokes collision, which is notably affected by the Stokes collision efficiency, and the inclusion removal is mainly attributed to the bubble-inclusion buoyancy collision and inclusion own floatation near slag-metal interface. At a higher gas flow rate, the inclusions appear as turbulence random motion in bubbly plume zone, and both the inclusion-inclusion and inclusion-bubble turbulent random collisions become

Napsin A levels in epithelial lining fluid as a diagnostic biomarker of primary lung adenocarcinoma.

Science.gov (United States)

Uchida, Akifumi; Samukawa, Takuya; Kumamoto, Tomohiro; Ohshige, Masahiro; Hatanaka, Kazuhito; Nakamura, Yoshihiro; Mizuno, Keiko; Higashimoto, Ikkou; Sato, Masami; Inoue, Hiromasa

2017-12-12

It is crucial to develop novel diagnostic approaches for determining if peripheral lung nodules are malignant, as such nodules are frequently detected due to the increased use of chest computed tomography scans. To this end, we evaluated levels of napsin A in epithelial lining fluid (ELF), since napsin A has been reported to be an immunohistochemical biomarker for histological diagnosis of primary lung adenocarcinoma. In consecutive patients with indeterminate peripheral lung nodules, ELF samples were obtained using a bronchoscopic microsampling (BMS) technique. The levels of napsin A and carcinoembryonic antigen (CEA) in ELF at the nodule site were compared with those at the contralateral site. A final diagnosis of primary lung adenocarcinoma was established by surgical resection. We performed BMS in 43 consecutive patients. Among patients with primary lung adenocarcinoma, the napsin A levels in ELF at the nodule site were markedly higher than those at the contralateral site, while there were no significant differences in CEA levels. Furthermore, in 18 patients who were undiagnosed by bronchoscopy and finally diagnosed by surgery, the napsin A levels in ELF at the nodule site were identically significantly higher than those at the contralateral site. In patients with non-adenocarcinoma, there were no differences in napsin A levels in ELF. The area under the receiver operator characteristic curve for identifying primary lung adenocarcinoma was 0.840 for napsin A and 0.542 for CEA. Evaluation of napsin A levels in ELF may be useful for distinguishing primary lung adenocarcinoma.

Mantle wedge infiltrated with saline fluids from dehydration and decarbonation of subducting slab.

Science.gov (United States)

Kawamoto, Tatsuhiko; Yoshikawa, Masako; Kumagai, Yoshitaka; Mirabueno, Ma Hannah T; Okuno, Mitsuru; Kobayashi, Tetsuo

2013-06-11

Slab-derived fluids play an important role in heat and material transfer in subduction zones. Dehydration and decarbonation reactions of minerals in the subducting slab have been investigated using phase equilibria and modeling of fluid flow. Nevertheless, direct observations of the fluid chemistry and pressure-temperature conditions of fluids are few. This report describes CO2-bearing saline fluid inclusions in spinel-harzburgite xenoliths collected from the 1991 Pinatubo pumice deposits. The fluid inclusions are filled with saline solutions with 5.1 ± 1.0% (wt) NaCl-equivalent magnesite crystals, CO2-bearing vapor bubbles, and a talc and/or chrysotile layer on the walls. The xenoliths contain tremolite amphibole, which is stable in temperatures lower than 830 °C at the uppermost mantle. The Pinatubo volcano is located at the volcanic front of the Luzon arc associated with subduction of warm oceanic plate. The present observation suggests hydration of forearc mantle and the uppermost mantle by slab-derived CO2-bearing saline fluids. Dehydration and decarbonation take place, and seawater-like saline fluids migrate from the subducting slab to the mantle wedge. The presence of saline fluids is important because they can dissolve more metals than pure H2O and affect the chemical evolution of the mantle wedge.

Primary magmas and mantle sources of Emeishan basalts constrained from major element, trace element and Pb isotope compositions of olivine-hosted melt inclusions

Science.gov (United States)

Ren, Zhong-Yuan; Wu, Ya-Dong; Zhang, Le; Nichols, Alexander R. L.; Hong, Lu-Bing; Zhang, Yin-Hui; Zhang, Yan; Liu, Jian-Qiang; Xu, Yi-Gang

2017-07-01

Olivine-hosted melt inclusions within lava retain important information regarding the lava's primary magma compositions and mantle sources. Thus, they can be used to infer the nature of the mantle sources of large igneous provinces, which is still not well known and of the subject of debate. We have analysed the chemical compositions and Pb isotopic ratios of olivine-hosted melt inclusions in the Dali picrites, Emeishan Large Igneous Province (LIP), SW China. These are the first in-situ Pb isotope data measured for melt inclusions found in the Emeishan picrites and allow new constraints to be placed on the source lithology of the Emeishan LIP. The melt inclusions show chemical compositional variations, spanning low-, intermediate- and high-Ti compositions, while their host whole rocks are restricted to the intermediate-Ti compositions. Together with the relatively constant Pb isotope ratios of the melt inclusions, the compositional variations suggest that the low-, intermediate- and high-Ti melts were derived from compositionally similar sources. The geochemical characteristics of melt inclusions, their host olivines, and whole-rocks from the Emeishan LIP indicate that Ca, Al, Mn, Yb, and Lu behave compatibly, and Ti, Rb, Sr, Zr, and Nb behave incompatibly during partial melting, requiring a pyroxenite source for the Emeishin LIP. The wide range of Ti contents in the melt inclusions and whole-rocks of the Emeishan basalts reflects different degrees of partial melting in the pyroxenite source at different depths in the melting column. The Pb isotope compositions of the melt inclusions and the OIB-like trace element compositions of the Emeishan basalts imply that mixing of a recycled ancient oceanic crust (EM1-like) component with a peridotite component from the lower mantle (FOZO-like component) could have underwent solid-state reaction, producing a secondary pyroxenite source that was subsequently partially melted to form the basalts. This new model of pyroxenite

Self-lubricating fluid bearing assembly

International Nuclear Information System (INIS)

Kapich, D.D.

1981-01-01

A sealed self-lubricating fluid bearing assembly is described for circulating fluid in the form of a gas coolant in a nuclear reactor, the power for the circulator being provided by a shaft located within the primary containment vessel. In such a system the reactor coolant is isolated from the fluid region at the far end of the drive shaft. (U.K.)

Vapour loss (``boiling'') as a mechanism for fluid evolution in metamorphic rocks

Science.gov (United States)

Trommsdorff, Volkmar; Skippen, George

1986-11-01

The calculation of fluid evolution paths during reaction progress is considered for multicomponent systems and the results applied to the ternary system, CO2-H2O-NaCl. Fluid evolution paths are considered for systems in which a CO2-rich phase of lesser density (vapour) is preferentially removed from the system leaving behind a saline aqueous phase (liquid). Such “boiling” leads to enrichment of the residual aqueous phase in dissolved components and, for certain reaction stoichiometries, to eventual saturation of the fluids in salt components. Distinctive textures, particularly radiating growths of prismatic minerals such as tremolite or diopside, are associated with saline fluid inclusions and solid syngenetic salt inclusions at a number of field localities. The most thoroughly studied of these localities is Campolungo, Switzerland, where metasomatic rocks have developed in association with fractures and veins at 500° C and 2,000 bars of pressure. The petrography of these rocks suggests that fluid phase separation into liquid and vapour has been an important process during metasomatism. Fracture systems with fluids at pressure less than lithostatic may facilitate the loss of the less dense vapour phase to conditions of the amphibolite facies.

Fluid-chemical evidence for one billion years of fluid flow through Mesoproterozoic deep-water carbonate mounds (Nanisivik zinc district, Nunavut)

Science.gov (United States)

Hahn, K. E.; Turner, E. C.; Kontak, D. J.; Fayek, M.

2018-02-01

Ancient carbonate rocks commonly contain numerous post-depositional phases (carbonate minerals; quartz) recording successive diagenetic events that can be deciphered and tied to known or inferred geological events using a multi-pronged in situ analytical protocol. The framework voids of large, deep-water microbial carbonate seep-mounds in Arctic Canada (Mesoproterozoic Ikpiarjuk Formation) contain multiple generations of synsedimentary and late cement. An in situ analytical study of the post-seafloor cements used optical and cathodoluminescence petrography, SEM-EDS analysis, fluid inclusion (FI) microthermometry and evaporate mound analysis, LA-ICP-MS analysis, and SIMS δ18O to decipher the mounds' long-term diagenetic history. The six void-filling late cements include, in paragenetic order: inclusion-rich euhedral dolomite (ED), finely crystalline clear dolomite (FCD), hematite-bearing dolomite (HD), coarsely crystalline clear dolomite (CCD), quartz (Q), replacive calcite (RC) and late calcite (LC). Based on the combined analytical results, the following fluid-flow history is defined: (1) ED precipitation by autocementation during shallow burial (fluid 1; Mesoproterozoic); (2) progressive mixing of Ca-rich hydrothermal fluid with the connate fluid, resulting in precipitation of FCD followed by HD (fluid 2; also Mesoproterozoic); (3) precipitation of hydrothermal dolomite (CCD) from high-Ca and K-rich fluids (fluid 3; possibly Mesoproterozoic, but timing unclear); (4) hydrothermal Q precipitation (fluid 4; timing unclear), and (5) RC and LC precipitation from a meteoric-derived water (fluid 5) in or since the Mesozoic. Fluids associated with FCD, HD, and CCD may have been mobilised during deposition of the upper Bylot Supergroup; this time interval was the most tectonically active episode in the region's Mesoproterozoic to Recent history. The entire history of intermittent fluid migration and cement precipitation recorded in seemingly unimportant void

Chemical Warfare Agent Simulants in Gamble’s Fluid: Is the Fluid Toxic? Can It Be Made Safer by Inclusion of Solid Nanocrystalline Metal Oxides?

Directory of Open Access Journals (Sweden)

Dennis Karote

2013-01-01

Full Text Available The reactions of chemical warfare agent simulants, 2-chloroethyl ethyl sulfide (2-CEES and di-i-propyl fluoro phosphate (DFP, in fluids have been investigated. Data analyses confirm the major degradation pathway to be hydrolysis of 2-CEES to 2-hydroxyethyl ethyl sulfide, along with minor self-condensation products. Among the three fluids examined, 2-CEES degradation was the fastest in Gamble’s fluid during a 96 h period. Upon addition of Exceptional Hazard Attenuation Materials (EHAMs to 2-CEES containing Gamble’s fluid, degradation was generally improved during the first 24 h period. The 96 h outcome was similar for fluid samples with or without EHAM 2 and EHAM 4. EHAM 1-added fluid contained only one degradation product, 2-nitroethyl ethyl sulfide. DFP degradation was the slowest in Gamble’s fluid, but was enhanced by the addition of EHAMs. FTIR and solid state 31P NMR confirm the destructive adsorption of 2-CEES and DFP by the EHAMs. The results collectively demonstrate that 2-CEES and DFP decompose to various extents in Gamble’s fluid over a 96 h period but the fluid still contains a considerable amount of intact simulant. EHAM 1 appears to be promising for 2-CEES and DFP mitigation while EHAM 2 and EHAM 4 work well for early on concentration reduction of 2-CEES and DFP.

A review of social inclusion measures.

Science.gov (United States)

Coombs, Tim; Nicholas, Angela; Pirkis, Jane

2013-10-01

Social inclusion is crucial to mental health and well-being and is emphasised in Australia's Fourth National Mental Health Plan. There is a recognition that a measure of social inclusion would complement the suite of outcome measures that is currently used in public sector mental health services. This paper is an initial scope of candidate measures of social inclusion and considers their suitability for this purpose. We identified potential measures through searches of PsycINFO and Medline and a more general Internet search. We extracted descriptive and evaluative information on each measure identified and compared this information with a set of eight criteria. The criteria related to the measure's inclusion of four domains of social inclusion outlined in Australia's Fourth National Mental Health Plan, its usability within the public mental health sector and its psychometric properties. We identified 10 candidate measures of social inclusion: the Activity and Participation Questionnaire (APQ-6); the Australian Community Participation Questionnaire (ACPQ); the Composite Measure of Social Inclusion (CMSI); the EMILIA Project Questionnaire (EPQ); the Evaluating Social Inclusion Questionnaire (ESIQ); the Inclusion Web (IW); the Social and Community Opportunities Profile (SCOPE); the Social Inclusion Measure (SIM); the Social Inclusion Questionnaire (SIQ); and the Staff Survey of Social Inclusion (SSSI). After comparison with the eight review criteria, we determined that the APQ-6 and the SCOPE-short form show the most potential for further testing. Social inclusion is too important not to measure. This discussion of individual-level measures of social inclusion provides a springboard for selecting an appropriate measure for use in public sector mental health services. It suggests that there are two primary candidates, but neither of these is quite fit-for-purpose in their current form. Further exploration will reveal whether one of these is suitable, whether another

Summary of United States Geological Survey investigations of fluid-rock-waste reactions in evaporite environments under repository conditions

International Nuclear Information System (INIS)

Stewart, D.B.; Jones, B.F.; Roedder, E.; Potter, R.W. II

1980-01-01

The interstitial and inclusion fluids contained in rock salt and anhydrite, though present in amounts less than 1 weight per cent, are chemically aggressive and may react with canisters or wastes. The three basic types of fluids are: (1) bitterns residual from saline mineral precipitation including later recrystallization reactions; (2) brines containing residual solutes from the formation of evaporite that have been extensively modified by reactions with contiguous carbonate of clastic rocks; and (3) re-solution brines resulting from secondary dehydration of evaporite minerals or solution of saline minerals by undersaturated infiltrating waters. Fluid composition can indicate that meteoric flow systems have contacted evaporites or that fluids from evaporites have migrated into other formations. The movement of fluids trapped in fluid inclusions in salt from southeast New Mexico is most sensitive to ambient temperature and to inclusion size, although several other factors such as thermal gradient and vapour/liquid ratio are also important. There is no evidence of a threshold temperature for movement of inclusions. Empirical data are given for determining the amount of brine reaching the heat source if the temperature, approximate amount of total dissolved solids, and Ca:Mg ratio in the brine are known. SrCl 2 and CsCl can reach high concentrations in saturated NaCl solutions and greatly depress the liquidus. The possibility that such fluids, if generated, could migrate from a high-level waste repository must be minimized because the fluid would contain its own radiogenic energy source in the first decades after repository closure, thus changing the thermal evolution of the repository from designed values. (author)

Numerical simulation of convection and inclusion distribution during solidification in a heavy steel ingot

International Nuclear Information System (INIS)

Lin, Rui; Shen, Houfa

2015-01-01

Inclusions content in the steel ingot is an important index for homogeneity, and it becomes more serious for heavy steel ingots which are used for major equipment. However, knowledge about the formation of inclusion in steel ingot is limited, and modeling of inclusion distribution is still challenging, so it is of great significance to research the behavior of inclusion. In this paper, fluid flow during solidification is numerically simulated based on the equilibrium equations of mass, momentum and energy, and then inclusion distribution is modeled according to the Lagrangian Stokes trajectory method. The Results show that the inclusion distribution in the steel ingot is influenced by the flow pattern which is affected by the solidification pattern. Therefore, inclusion distribution could be controlled by the solidification front with the optimization of heat transfer condition such as the hot top design of steel ingot for the high quality steel production. (paper)

Paleohydrogeological events recorded by stable isotopes, fluid inclusions and trace elements in fracture minerals in crystalline rock, Simpevarp area, SE Sweden

International Nuclear Information System (INIS)

Drake, Henrik; Tullborg, Eva-Lena

2009-01-01

Fracture minerals calcite, pyrite, gypsum, barite and quartz, formed during several events have been analysed for δ 13 C, δ 18 O, δ 34 S, 87 Sr/ 86 Sr, trace element chemistry and fluid inclusions in order to gain knowledge of the paleohydrogeological evolution of the Simpevarp area, south-eastern Sweden. This area is dominated by Proterozoic crystalline rocks and is currently being investigated by the Swedish Nuclear Fuel and Waste Management Co. (SKB) in order to find a suitable location for a deep-seated repository for spent nuclear fuel. Knowledge of the paleohydrogeological evolution is essential to understand the stability or evolution of the groundwater system over a time scale relevant to the performance assessment for a spent nuclear fuel repository. The ages of the minerals analysed range from the Proterozoic to possibly the Quaternary. The Proterozoic calcite and pyrite show inorganic and hydrothermal-magmatic stable isotope signatures and were probably formed during a long time period as indicated by the large span in temperatures (c. 200-360 deg. C) and salinities (0-24 wt.% eq. CaCl 2 ), obtained from fluid inclusion analyses. The Paleozoic minerals were formed from organically influenced brine-type fluids at temperatures of 80-145 deg. C. The isotopic results indicate that low temperature calcite and pyrite may have formed during different events ranging in time possibly from the end of the Paleozoic until the Quaternary. Formation conditions ranging from fresh to brackish and saline waters have been distinguished based on calcite crystal morphologies. The combination of δ 18 O and crystal morphologies show that the fresh-saline water interface has changed considerably over time, and water similar to the present meteoric water and brackish seawater at the site, have most probably earlier been residing in the bedrock. Organic influence and closed system in situ microbial activity causing disequilibrium are indicated by extremely low δ 13 C (down

Inclusive rapidity correlations of π- mesons in pp interactions

International Nuclear Information System (INIS)

Golokhvastov, A.I.

1994-01-01

The simple single-parameter approximation of one-particle semi-inclusive rapidity distributions of negative particles (π - mesons) in pp interactions at various multiplicities over the investigated range of primary momenta 6.6 -400 GeV/c is presented. Assuming the lack of any kind of correlations in semi-inclusive events, a good description of experimental data on two-particle inclusive rapidity correlations (pseudocorrelations) is obtained. Data on forward-backward, right-left correlations and multiplicity distributions in rapidity intervals and intervals separated by empty gaps do not contradict independent π - production either. (orig.)

Characteristics of primary teacher training programmes on inclusion : A literature focus

NARCIS (Netherlands)

Kurniawati, Farida; De Boer, Anke A.; Minnaert, A. E. M. G.; Mangunsong, Frieda

2014-01-01

Background: The implementation of inclusive education creates challenges for classroom teachers who have to meet the learning needs of students with and without special educational needs (SEN). Research has revealed that teachers' readiness and willingness to accommodate the learning needs of

Decreased synovial fluid ghrelin levels are linked with disease severity in primary knee osteoarthritis patients and are increased following laser therapy.

Science.gov (United States)

Zou, Yu-Cong; Deng, Hong-Yu; Mao, Zheng; Zhao, Chang; Huang, Ju; Liu, Gang

2017-07-01

Ghrelin has been proved to inhibit inflammation and promote cartilage growth. So far, its role in patients with primary knee osteoarthritis has not been investigated. The current study was performed to explore the serum and synovial ghrelin levels as well as the relationship between ghrelin levels and disease severity in primary knee OA patients. 52 primary knee OA patients were recruited in the study. 52 sex and age-matched patients visiting our hospital for regular body check were selected as controls. The serum and synovial fluid ghrelin levels were examined by enzyme linked immunosorbent assay (ELISA) before treatment, one week and four weeks after laser therapy, respectively. The inflammation markers IL-6 and TNF-α were also investigated. The radiographic progression was assessed by Kellgren-Lawrence (K-L) grade scale and the symptomatic severity was evaluated by visual analog scale (VAS), Lequesne index and Lysholm scores. The Receiver Operating Characteristic (ROC) analysis curve was conducted to test the diagnostic value of ghrelin, IL-6 and TNF-α for radiographic progression. No significant difference of serum ghrelin levels was found between knee OA patients and healthy controls. Synovial fluid ghrelin concentrations were significantly negatively correlated with K-L grading (r=-0.591, Pghrelin levels were also related to clinical severity determined by Lequesne index (r=-0.308, P=0.025),VAS scores (r=-0.591, Pghrelin levels were also negatively associated with TNF-α (r=-0.424, P=0.002) and IL-6 concentrations (r=-0.428, P=0.002). ROC curve analysis demonstrated that ghrelin exhibited more diagnostic value than IL-6 and TNF-α for assessing radiographic progression in medium-late stage. Decreased synovial fluid ghrelin levels are related to disease severity in patients with primary osteoarthritis and are increased following laser therapy. Local application of ghrelin may serve as an adjunctive therapy for knee OA. Copyright © 2017. Published by

Tourmalinization at the Darasun goldfield, Eastern Transbaikalia: Compositional, fluid inclusion and isotopic constraints

Directory of Open Access Journals (Sweden)

Vsevolod Prokofiev

2012-01-01

Full Text Available Zoned tourmaline (schorl-dravite in the matrix of hydrothermal explosive breccia and ore veins in gold deposits, Chita region, Eastern Transbaikalia, Russia, are associated with Na- and K-rich porphyry-type subvolcanic intrusives. δ18O values of tourmaline from three gold deposits (Darasun, Talatui, Teremkinskoye are +8.3‰, +7.6‰, and +6.0‰ and calculated δ18O values of fluids responsible for the tourmalinization are +7.3‰, +7.7‰, and +4.2‰, respectively. These data imply an igneous fluid source, except at the Teremkin deposit where mixing with meteoric water is indicated. Wide ranges of Fe3+/Fetot and the presence of vacancies characterize the Darasun deposit tourmaline indicating wide ranges of ƒ(O2 and pH of mineralizing fluids. Initial stage tourmalines from the gold deposits of the Darasun ore district are dravite or high mg schorl. Second stage tourmaline is characterized by oscillatory zoning but with Fe generally increasing towards crystal rims indicating decreasing temperature. Third stage tourmaline formed unzoned crystals with xMg (mole fraction of Mg close to that of the first stage tourmaline, due to a close association with pyrite and arsenopyrite. From Fe3+/Fetot values, chemical composition and crystallization temperatures, logf(O2 of mineralizing fluids ranged from ca. −25 to −20, much higher than for the gold-bearing beresite–listvenite association, indicating that tourmalinization was not related to gold mineralization.

Retrograde mineral and fluid evolution in high-pressure metapelites (Schistes Lustres unit, Western Alps).

NARCIS (Netherlands)

Agard, Ph.; Goffe, B.; Touret, J.L.R.; Vidal, O.

2000-01-01

Fluid inclusions have been analysed in successive generations of syn-metamorphic segregations within low-grade, high-pressure, low-temperature (HP-LT) metapelites from the Western Alps. Fluid composition was then compared to mass transfer deduced from outcrop-scale retrograde mineral reactions. Two

Numerical study of influence of inclusion movement on channel segregation in Fe- 0.21 wt% C- 0.1 wt% S alloy

International Nuclear Information System (INIS)

Liu, D R; Yang, Z P; Sun, Q Y; Wang, L P; Ma, B X

2016-01-01

A two-dimensional continuum model on solute and heat transport, and fluid flow is developed to numerically investigate the influence of inclusion movement on the development of channel segregation. A trajectory model is used to track the moving path of inclusion particles. Inclusion movement affects the flow field in simulation by means of interfacial friction coefficient. Simulations are performed on the Hebditch-Hunt casting. A parametric study is carried out to study the effects of with and without inclusions, and diameter (5 × 10 -6 m, 10 × 10 -6 m, 20 × 10 -6 m and 40 × 10 -6 m) of inclusions on channel segregation. It is found that the channel segregation is strengthened with the consideration of inclusion movement. Compared to other diameters, inclusions with diameter 20 × 10 -6 m are found to enhance the channel segregation. This is because the larger inclusions (40 × 10 -6 m) present a faster floating velocity that reduces the interaction time between inclusion upward movement and the development of solidification front, and then lessens the disturbance to solidification front that is important to the initialization of channel segregation. The upward movement of smaller inclusions (5 × 10 -6 m and 10 × 10 -6 m) cannot greatly increase the upward velocity of fluid flow. Therefore, the formation of channel segregation is less affected. (paper)

Microscopic Identification of Prokaryotes in Modern and Ancient Halite, Saline Valley and Death Valley, California

Science.gov (United States)

Schubert, Brian A.; Lowenstein, Tim K.; Timofeeff, Michael N.

2009-06-01

Primary fluid inclusions in halite crystallized in Saline Valley, California, in 1980, 2004-2005, and 2007, contain rod- and coccoid-shaped microparticles the same size and morphology as archaea and bacteria living in modern brines. Primary fluid inclusions from a well-dated (0-100,000 years), 90 m long salt core from Badwater Basin, Death Valley, California, also contain microparticles, here interpreted as halophilic and halotolerant prokaryotes. Prokaryotes are distinguished from crystals on the basis of morphology, optical properties (birefringence), and uniformity of size. Electron micrographs of microparticles from filtered modern brine (Saline Valley), dissolved modern halite crystals (Saline Valley), and dissolved ancient halite crystals (Death Valley) support in situ microscopic observations that prokaryotes are present in fluid inclusions in ancient halite. In the Death Valley salt core, prokaryotes in fluid inclusions occur almost exclusively in halite precipitated in perennial saline lakes 10,000 to 35,000 years ago. This suggests that trapping and preservation of prokaryotes in fluid inclusions is influenced by the surface environment in which the halite originally precipitated. In all cases, prokaryotes in fluid inclusions in halite from the Death Valley salt core are miniaturized (<1 μm diameter cocci, <2.5 μm long, very rare rod shapes), which supports interpretations that the prokaryotes are indigenous to the halite and starvation survival may be the normal response of some prokaryotes to entrapment in fluid inclusions for millennia. These results reinforce the view that fluid inclusions in halite and possibly other evaporites are important repositories of microbial life and should be carefully examined in the search for ancient microorganisms on Earth, Mars, and elsewhere in the Solar System.

Culture, Structure and Leadership Impacts on Gender Inclusion in the Security Sector

Science.gov (United States)

2017-09-01

Culture, structure and leadership impacts on gender inclusion in the security sector 1 DANIEL K. INOUYE ASIA PACIFIC CENTER FOR SECURITY...STUDIES OCCASIONAL PAPER, SEPTEMBER 2017 Culture, structure and leadership impacts on gender inclusion in the security sector Canyon DV Abstract...Depending on your perspective, the primary challenge to gender inclusion is either culture, structure or leadership . The good news is that they are all

The Krásná Hora, Milešov, and Příčovy Sb-Au ore deposits, Bohemian Massif: mineralogy, fluid inclusions, and stable isotope constraints on the deposit formation

Science.gov (United States)

Němec, Matěj; Zachariáš, Jiří

2018-02-01

The Krásná Hora-Milešov and Příčovy districts (Czech Republic) are the unique examples of Sb-Au subtype orogenic gold deposits in the Bohemian Massif. They are represented by quartz-stibnite veins and massive stibnite lenses grading into low-grade, disseminated ores in altered host rocks. Gold postdates the stibnite and is often replaced by aurostibite. The ore zones are hosted by hydrothermally altered dikes of lamprophyres (Krásná Hora-Milešov) or are associated with local strike-slip faults (Příčovy). Formation of Sb-Au deposits probably occurred shortly after the main gold-bearing event (348-338 Ma; Au-only deposits) in the central part of the Bohemian Massif. Fluid inclusion analyses suggest that stibnite precipitated at 250 to 130 °C and gold at 200 to 130 °C from low-salinity aqueous fluids. The main quartz gangue hosting the ore precipitated from the same type of fluid at about 300 °C. Early quartz-arsenopyrite veins are not associated with the Sb-Au deposition and formed from low-salinity, aqueous-carbonic fluid at higher pressure and temperature ( 250 MPa, 400 °C). The estimated oxygen isotope composition of the ore-bearing fluid (4 ± 1‰ SMOW; based on post-ore calcite) suggests its metamorphic or mixed magmatic-metamorphic origin and excludes the involvement of meteoric water. Rapid cooling of warm hydrothermal fluids reacting with "cold" host rock was probably the most important factor in the formation of both stibnite and gold.

Immunotherapy With Magentorheologic Fluids

Science.gov (United States)

2011-08-01

anti-tumor effects are weakened by removal of the tumor antigen pool (i.e. surgery) or use of cytoreductive and immunosuppressive therapies (i.e...particles were injected as magneto -rheological fluid (MRF) into an orthotopic primary breast cancer and followed by application of a magnetic field to...SUBJECT TERMS MRF: Magneto -rehological fluid iron particles, IT: immunotherapy, necrotic death, DCs: dendritic cells, cytokines, chemokines

LN Murungi INCLUSIVE BASIC EDUCATION IN SOUTH AFRICA

African Journals Online (AJOL)

This article considers how “inclusive education” may be construed in ... Primary Education of Children with Disabilities: A Comparative Study of Kenya and ..... paradigm.83 It departed from the pre-existing classification of learners as either.

Role for chlamydial inclusion membrane proteins in inclusion membrane structure and biogenesis.

Directory of Open Access Journals (Sweden)

Jeffrey Mital

Full Text Available The chlamydial inclusion membrane is extensively modified by the insertion of type III secreted effector proteins. These inclusion membrane proteins (Incs are exposed to the cytosol and share a common structural feature of a long, bi-lobed hydrophobic domain but little or no primary amino acid sequence similarity. Based upon secondary structural predictions, over 50 putative inclusion membrane proteins have been identified in Chlamydia trachomatis. Only a limited number of biological functions have been defined and these are not shared between chlamydial species. Here we have ectopically expressed several C. trachomatis Incs in HeLa cells and find that they induce the formation of morphologically distinct membranous vesicular compartments. Formation of these vesicles requires the bi-lobed hydrophobic domain as a minimum. No markers for various cellular organelles were observed in association with these vesicles. Lipid probes were incorporated by the Inc-induced vesicles although the lipids incorporated were dependent upon the specific Inc expressed. Co-expression of Inc pairs indicated that some colocalized in the same vesicle, others partially overlapped, and others did not associate at all. Overall, it appears that Incs may have an intrinsic ability to induce membrane formation and that individual Incs can induce membranous structures with unique properties.

Teachers' Attitudes towards Inclusive Education: A Critical Review of Published Questionnaires

Science.gov (United States)

Ewing, Donna L.; Monsen, Jeremy J.; Kielblock, Stephan

2018-01-01

Teachers' attitudes towards inclusive education affect its successful implementation within mainstream schools. This paper reviews nine questionnaires which capture primary school teachers' attitudes towards inclusion, with the aim to support researchers in selecting the most appropriate measure according to the purpose of their study. Most of the…

Diversity in C-Xanes Spectra Obtained from Carbonaceous Solid Inclusions from Monahans Halite

Science.gov (United States)

Kebukawa, Y.; Zolensky, M. E.; Fries, M.; Kilcoyne, A. L. D.; Rahman, Z.; Cody, G. D.

2014-01-01

Monahans meteorite (H5) contains fluid inclusion- bearing halite (NaCl) crystals [1]. Microthermometry and Raman spectroscopy showed that the fluid in the inclusions is an aqueous brine and they were trapped near 25degC [1]. Their continued presence in the halite grains requires that their incorporation into the H chondrite asteroid was post metamorphism [2]. Abundant solid inclusions are also present in the halites. The solid inclusions include abundant and widely variable organics [2]. Analyses by Raman microprobe, SEM/EDX, synchrotron X-ray diffraction and TEM reveal that these grains include macromolecular carbon similar in structure to CV3 chondrite matrix carbon, aliphatic carbon compounds, olivine (Fo99-59), high- and low-Ca pyroxene, feldspars, magnetite, sulfides, lepidocrocite, carbonates, diamond, apatite and possibly the zeolite phillipsite [3]. Here we report organic analyses of these carbonaceous residues in Monahans halite using C-, N-, and O- X-ray absorption near edge structure (XANES). Samples and Methods: Approximately 100 nm-thick sections were extracted with a focused ion beam (FIB) at JSC from solid inclusions from Monahans halite. The sections were analyzed using the scanning transmission X-ray microscope (STXM) on beamline 5.3.2.2 at the Advanced Light Source, Lawrence Berkeley National Laboratory for XANES spectroscopy. Results and Discussion: C-XANES spectra of the solid inclusions show micrometer-scale heterogeneity, indicating that the macromolecular carbon in the inclusions have complex chemical variations. C-XANES features include 284.7 eV assigned to aromatic C=C, 288.4-288.8 eV assigned to carboxyl, and 290.6 eV assigned to carbonate. The carbonyl features obtained by CXANES might have been caused by the FIB used in sample preparation. No specific N-XANES features are observed. The CXANES spectra obtained from several areas in the FIB sections include type 1&2 chondritic IOM like, type 3 chondritic IOM like, and none of the above

Social inclusion and inclusive education

Directory of Open Access Journals (Sweden)

Marsela Robo

2014-07-01

In line with global debate on social inclusion and exclusion, the author brings the way this debate has now pervaded both the official and development policy discourse in Albania.Social inclusion is considered as one of the priorities of the current government, with poverty reduction as its main focus, which will be ensured not only through economic development. In the end, the article focuses on the role of education as a very important and useful tool for ensuring social inclusion.Social inclusion through education, in particular through vocational education, considered by the author as the only way towards sustainable development of Albanian society.

Origin and tectonic implications of the Zhaxikang Pb-Zn-Sb-Ag deposit in northern Himalaya: evidence from structures, Re-Os-Pb-S isotopes, and fluid inclusions

Science.gov (United States)

Zhou, Qing; Li, Wenchang; Qing, Chengshi; Lai, Yang; Li, Yingxu; Liao, Zhenwen; Wu, Jianyang; Wang, Shengwei; Dong, Lei; Tian, Enyuan

2018-04-01

The Zhaxikang Pb-Zn-Sb-Ag-(Au) deposits, located in the eastern part of northern Himalaya, totally contain more than 1.146 million tonnes (Mt) of Pb, 1.407 Mt of Zn, 0.345 Mt of Sb, and 3 kilotonnes (kt) of Ag. Our field observations suggest that these deposits are controlled by N-S trending and west- and steep-dipping normal faults, suggesting a hydrothermal rather than a syngenetic sedimentary origin. The Pb-Zn-Sb-Ag-(Cu-Au) mineralization formed in the Eocene as indicated by a Re-Os isochron age of 43.1 ± 2.5 Ma. Sulfide minerals have varying initial Pb isotopic compositions, with (206Pb/204Pb)i of 19.04-19.68, (207Pb/204Pb)i of 15.75-15.88, and (208Pb/204Pb)i of 39.66-40.31. Sulfur isotopic values display a narrow δ34S interval of +7.8-+12.2‰. These Pb-S isotopic data suggest that the Zhaxikang sources of Pb and S should be mainly from the coeval felsic magmas and partly from the surrounding Mesozoic strata including metasedimentary rocks and layered felsic volcanic rocks. Fluid inclusion studies indicate that the hydrothermal fluids have medium temperatures (200-336 °C) but varying salinities (1.40-18.25 wt.% NaCl equiv.) with densities of 0.75-0.95 g/cm3, possibly suggesting an evolution mixing between a high salinity fluid, perhaps of magmatic origin, with meteoric water.

Instabilities and diffusion in a hydrodynamic model of a fluid membrane coupled to a thin active fluid layer.

Science.gov (United States)

Sarkar, N; Basu, A

2012-11-01

We construct a coarse-grained effective two-dimensional (2d hydrodynamic theory as a theoretical model for a coupled system of a fluid membrane and a thin layer of a polar active fluid in its ordered state that is anchored to the membrane. We show that such a system is prone to generic instabilities through the interplay of nonequilibrium drive, polar order and membrane fluctuation. We use our model equations to calculate diffusion coefficients of an inclusion in the membrane and show that their values depend strongly on the system size, in contrast to their equilibrium values. Our work extends the work of S. Sankararaman and S. Ramaswamy (Phys. Rev. Lett., 102, 118107 (2009)) to a coupled system of a fluid membrane and an ordered active fluid layer. Our model is broadly inspired by and should be useful as a starting point for theoretical descriptions of the coupled dynamics of a cell membrane and a cortical actin layer anchored to it.

Characteristics and carbon stable isotopes of fluids in the Southern Kerala granulites and their bearing on the source of CO2

Science.gov (United States)

Santosh, M.; Jackson, D. H.; Mattey, D. P.; Harris, N. B. W.

1988-01-01

Carbon dioxide-rich inclusions commonly occur in the banded charnockites and khondalites of southern Kerala as well as in the incipient charnockites formed by desiccation of gneisses along oriented zones. The combined high density fluid inclusion isochores and the range of thermometric estimates from mineral assemblages indicate entrapment pressures in the range of 5.4 to 6.1 Kbar. The CO2 equation of state barometry closely compares with the 5 plus or minus 1 Kbar estimate from mineral phases for the region. The isochores for the high density fluid inclusions in all the three rock types pass through the P-T domain recorded by phase equilibria, implying that carbon dioxide was the dominating ambient fluid species during peak metamorphic conditions. In order to constrain the source of fluids and to evaluate the mechanism of desiccation, researchers undertook detailed investigations of the carbon stable isotope composition of entrapped fluids. Researchers report here the results of preliminary studies in some of the classic localities in southern Kerala namely, Ponmudi, Kottavattom, Manali and Kadakamon.

Preparing Teachers for Inclusive Education in Botswana: The Role of Professional Development

Science.gov (United States)

Mangope, Boitumelo; Mukhopadhyay, Sourav

2015-01-01

The continuing professional development of teachers is crucial for implementation of inclusive education and improving the quality of educational service delivery of all learners. The purpose of this preliminary study was to explore teachers' beliefs about professional development for inclusive education in two primary and two secondary schools in…

HANFORD DOUBLE-SHELL TANK THERMAL and SEISMIC PROJECT-ANSYS BENCHMARK ANALYSIS OF SEISMICALLY INDUCED FLUID-STRUCTURE INTERACTION IN A HANFORD DOUBLE-SHELL PRIMARY TANK

International Nuclear Information System (INIS)

MACKEY, T.C.

2006-01-01

M and D Professional Services, Inc. (M and D) is under subcontract to Pacific Northwest National Laboratories (PNNL) to perform seismic analysis of the Hanford Site Double-Shell Tanks (DSTs) in support of a project entitled ''Double-Shell Tank (DSV Integrity Project-DST Thermal and Seismic Analyses)''. The overall scope of the project is to complete an up-to-date comprehensive analysis of record of the DST System at Hanford in support of Tri-Party Agreement Milestone M-48-14. The work described herein was performed in support of the seismic analysis of the DSTs. The thermal and operating loads analysis of the DSTs is documented in Rinker et al. (2004). The overall seismic analysis of the DSTs is being performed with the general-purpose finite element code ANSYS. The overall model used for the seismic analysis of the DSTs includes the DST structure, the contained waste, and the surrounding soil. The seismic analysis of the DSTs must address the fluid-structure interaction behavior and sloshing response of the primary tank and contained liquid. ANSYS has demonstrated capabilities for structural analysis, but the capabilities and limitations of ANSYS to perform fluid-structure interaction are less well understood. The purpose of this study is to demonstrate the capabilities and investigate the limitations of ANSYS for performing a fluid-structure interaction analysis of the primary tank and contained waste. To this end, the ANSYS solutions are benchmarked against theoretical solutions appearing in BNL 1995, when such theoretical solutions exist. When theoretical solutions were not available, comparisons were made to theoretical solutions of similar problems and to the results from Dytran simulations. The capabilities and limitations of the finite element code Dytran for performing a fluid-structure interaction analysis of the primary tank and contained waste were explored in a parallel investigation (Abatt 2006). In conjunction with the results of the global ANSYS

"Unconscious" Inclusion of Students with Learning Disabilities in a Malaysian Mainstream Primary School: Teachers' Perspectives

Science.gov (United States)

Lee, Lay Wah; Low, Hui Min

2013-01-01

The inclusion of children with special needs in mainstream regular schools has been seen as the best practice in special education provision, most markedly since the 90s. International research has provided amassing evidence towards the advantages of inclusive model over a segregation model of special education provision. However, nearly two…

The mobility of U and Th in subduction zone fluids: an indicator of oxygen fugacity and fluid salinity

Science.gov (United States)

Bali, Enikő; Audétat, Andreas; Keppler, Hans

2011-04-01

The solubility of U and Th in aqueous solutions at P-T-conditions relevant for subduction zones was studied by trapping uraninite or thorite saturated fluids as synthetic fluid inclusions in quartz and analyzing their composition by Laser Ablation-ICPMS. Uranium is virtually insoluble in aqueous fluids at Fe-FeO buffer conditions, whereas its solubility increases both with oxygen fugacity and with salinity to 960 ppm at 26.1 kbar, Re-ReO2 buffer conditions and 14.1 wt% NaCl in the fluid. At 26.1 kbar and 800°C, uranium solubility can be reproduced by the equation: log {{U}} = 2.681 + 0.1433log f{{O}}2 + 0.594{{Cl,}} where fO2 is the oxygen fugacity, and Cl is the chlorine content of the fluid in molality. In contrast, Th solubility is generally low (uranium increases strongly both with oxygen fugacity and with salinity. We show that reducing or NaCl-free fluids cannot produce primitive arc magmas with U/Th ratio higher than MORB. However, the dissolution of several wt% of oxidized, saline fluids in arc melts can produce U/Th ratios several times higher than in MORB. We suggest that observed U/Th ratios in arc magmas provide tight constraints on both the salinity and the oxidation state of subduction zone fluids.

Determination for the Entrapment Criterion of Non-metallic Inclusions by the Solidification Front During Steel Centrifugal Continuous Casting

Science.gov (United States)

Wang, Qiangqiang; Zhang, Lifeng

2016-06-01

In the current study, the three-dimensional fluid flow, heat transfer, and solidification in steel centrifugal continuous casting strands were simulated. The volume of fluid model was used to solve the multiphase phenomena between the molten steel and the air. The entrapment and final distribution of inclusions in the solidified shell were studied with the discussion on the effect of rotation behavior of the caster system. Main results indicate that after applying the rotation of the shell, the fluid flow transformed from a recirculation flow to a rotation flow in the mold region and was driven to flow around in the casting direction. As the distance below the meniscus increased, the distribution of the tangential speed of the flow and the centrifugal force along one diameter of the strand became symmetrical gradually. The jet flow from the nozzle hardly impinged on the same location on the shell due to the rotation of the shell during solidification. Thus, the shell thickness on the same height was uniform around, and the thinning shell and a hot spot on the surface of shell were avoided. Both of the measurement and the calculation about the distribution of oxide inclusions along the radial direction indicated the number of inclusions at the side and the center was more than that at the quarter on the cross section of billet. With a larger diameter, inclusions tended to be entrapped toward the center area of the billet.

Geological-geochemical evidence for deep fluid action in Daqiaowu uranium deposit, Zhejiang province

International Nuclear Information System (INIS)

Qiu Linfei; Ou Guangxi; Zhang Jianfeng; Zhang Min; Jin Miaozhang; Wang Binghua

2009-01-01

Through the contrast study of petrography, micro thermometry and laser Raman ingredient analysis of fluid inclusion, this paper has verified the basic nature of ore-forming fluid (temperature, salinity and ingredient) in daqiaowu uranium deposit, discussed the origin of the ore-forming fluid with its structure character and geology-geochemistry character. The testing results indicats that ore-forming temperature of this deposit is between 200 degree C and 250 degree C in main metallogenetic period, which belongs to middle temperature hydrothermal. The ore-forming fluids are of middle-high salinity and rich in valatility suchas CO 2 , H 2 , CH 4 . To sum up, the deposit mineralization process should be affected by the deep fluid primarily, and the ore-forming fluid is mainly the mantle fluid.(authors)

Prediction of ore fluid metal concentrations from solid solution concentrations in ore-stage calcite: Application to the Illinois-Kentucky and Central Tennessee Mississippi Valley-type districts

Science.gov (United States)

Smith-Schmitz, Sarah E.; Appold, Martin S.

2018-03-01

Knowledge of the concentrations of Zn and Pb in Mississippi Valley-type (MVT) ore fluids is fundamental to understanding MVT deposit origin. Most previous attempts to quantify the concentrations of Zn and Pb in MVT ore fluids have focused on the analysis of fluid inclusions. However, these attempts have yielded ambiguous results due to possible contamination from secondary fluid inclusions, interferences from Zn and Pb in the host mineral matrix, and uncertainties about whether the measured Zn and Pb signals represent aqueous solute or accidental solid inclusions entrained within the fluid inclusions. The purpose of the present study, therefore, was to try to determine Zn and Pb concentrations in MVT ore fluids using an alternate method that avoids these ambiguities by calculating Zn and Pb concentrations in MVT ore fluids theoretically based on their solid solution concentrations in calcite. This method was applied to the Illinois-Kentucky and Central Tennessee districts, which both contain ore-stage calcite. Experimental partition coefficient (D) values from Rimstidt et al. (1998) and Tsusue and Holland (1966), and theoretical thermodynamic distribution coefficient (KD) values were employed in the present study. Ore fluid concentrations of Zn were likely most accurately predicted by Rimstidt et al. (1998) D values, based on their success in predicting known fluid inclusion concentrations of Mg and Mn, and likely also most accurately predicted ore fluid concentrations of Fe. All four of these elements have a divalent ionic radius smaller than that of Ca2+ and form carbonate minerals with the calcite structure. For both the Illinois-Kentucky and the Central Tennessee district, predicted ore fluid Zn and Fe concentrations were on the order of up to 10's of ppm. Ore fluid concentrations of Pb could only be predicted using Rimstidt et al. (1998) D values. However, these concentrations are unlikely to be reliable, as predicted ore fluid concentrations of Sr and Ba

Challenges with Tertiary-Level Mechatronic Fluid Power

DEFF Research Database (Denmark)

Dransfield, Peter; Conrad, Finn

1996-01-01

As authors we take the view that mechatronics, as it relates to fluid power, has three levels which we designate as primary, secondary and tertiary. A brief review of the current status of fluid power, hydraulic and pneumatic, and of electronic control of it is presented and discussed. The focus...... is then on tertiary-level mechatronic fluid power and the challenges to it being applied successfully....

Genesis of diamond inclusions: An integrated cathodoluminescence (CL) and Electron backscatter diffraction (EBSD) study on eclogitic and peridotitic inclusions and their diamond host.

Science.gov (United States)

van den Heuvel, Quint; Matveev, Sergei; Drury, Martyn; Gress, Michael; Chinn, Ingrid; Davies, Gareth

2017-04-01

Diamond inclusions are potentially fundamental to understanding the formation conditions of diamond and the volatile cycles in the deep mantle. In order to fully understand the implications of the compositional information recorded by inclusions it is vital to know whether the inclusions are proto-, syn-, or epigenetic and the extent to which they have equilibrated with diamond forming fluids. In previous studies, the widespread assumption was made that the majority of diamond inclusions are syngenetic, based upon observation of cubo-octahedral morphology imposed on the inclusions. Recent work has reported the crystallographic relationship between inclusions and the host diamond to be highly complex and the lack of crystallographic relationships between inclusions and diamonds has led some to question the significance of imposed cubo-octahedral morphology. This study presents an integrated EBSD and CL study of 9 diamonds containing 20 pyropes, 2 diopsides, 1 forsterite and 1 rutile from the Jwaneng and Letlhakane kimberlite clusters, Botswana. A new method was developed to analyze the crystallographic orientation of the host diamond and the inclusions with EBSD. Diamonds plates were sequentially polished to expose inclusions at different levels in the diamond. CL imaging at different depths was performed in order to produce a 3D view of diamond growth zones around the inclusions. Standard diamond polishing techniques proved too aggressive for silicate inclusions as they were damaged to such a degree that EBSD measurements on the inclusions were impossible. The inclusions were milled with a Ga+ focused ion beam (FIB) at a 12° angle to clean the surface for EBSD measurements. Of the 24 inclusions, 9 have an imposed cubo-octahedral morphology. Of these inclusions, 6 have faces orientated parallel to diamond growth zones and/or appear to have nucleated on a diamond growth surface, implying syngenesis. In contrast, other diamonds record resorption events such that

Effective interactions between inclusions in an active bath

Science.gov (United States)

Zaeifi Yamchi, Mahdi; Naji, Ali

2017-11-01

We study effective two- and three-body interactions between non-active colloidal inclusions in an active bath of chiral or non-chiral particles, using Brownian dynamics simulations within a standard, two-dimensional model of disk-shaped inclusions and active particles. In a non-chiral active bath, we first corroborate previous findings on effective two-body repulsion mediated between the inclusions by elucidating the detailed non-monotonic features of the two-body force profiles, including a primary maximum and a secondary hump at larger separations that was not previously reported. We then show that these features arise directly from the formation, and sequential overlaps, of circular layers (or "rings") of active particles around the inclusions, as the latter are brought to small surface separations. These rings extend to radial distances of a few active-particle radii from the surface of inclusions, giving the hard-core inclusions relatively thick, soft, repulsive "shoulders," whose multiple overlaps then enable significant (non-pairwise) three-body forces in both non-chiral and chiral active baths. The resulting three-body forces can even exceed the two-body forces in magnitude and display distinct repulsive and attractive regimes at intermediate to large self-propulsion strengths. In a chiral active bath, we show that, while active particles still tend to accumulate at the immediate vicinity of the inclusions, they exhibit strong depletion from the intervening region between the inclusions and partial depletion from relatively thick, circular zones further away from the inclusions. In this case, the effective, predominantly repulsive interactions between the inclusions turn to active, chirality-induced, depletion-type attractions, acting over an extended range of separations.

[Diagnosis: synovial fluid analysis].

Science.gov (United States)

Gallo Vallejo, Francisco Javier; Giner Ruiz, Vicente

2014-01-01

Synovial fluid analysis in rheumatological diseases allows a more accurate diagnosis in some entities, mainly infectious and microcrystalline arthritis. Examination of synovial fluid in patients with osteoarthritis is useful if a differential diagnosis will be performed with other processes and to distinguish between inflammatory and non-inflammatory forms. Joint aspiration is a diagnostic and sometimes therapeutic procedure that is available to primary care physicians. Copyright © 2014 Elsevier España, S.L. All rights reserved.

Evolution Inclusions and Variation Inequalities for Earth Data Processing II Differential-operator Inclusions and Evolution Variation Inequalities for Earth Data Processing

CERN Document Server

Zgurovsky, Mikhail Z; Kasyanov, Pavlo O

2011-01-01

Here, the authors present modern mathematical methods to solve problems of differential-operator inclusions and evolution variation inequalities which may occur in fields such as geophysics, aerohydrodynamics, or fluid dynamics. For the first time, they describe the detailed generalization of various approaches to the analysis of fundamentally nonlinear models and provide a toolbox of mathematical equations. These new mathematical methods can be applied to a broad spectrum of problems. Examples of these are phase changes, diffusion of electromagnetic, acoustic, vibro-, hydro- and seismoacousti

A mathematical model of fluid and gas flow in nanoporous media.

Science.gov (United States)

Monteiro, Paulo J M; Rycroft, Chris H; Barenblatt, Grigory Isaakovich

2012-12-11

The mathematical modeling of the flow in nanoporous rocks (e.g., shales) becomes an important new branch of subterranean fluid mechanics. The classic approach that was successfully used in the construction of the technology to develop oil and gas deposits in the United States, Canada, and the Union of Soviet Socialist Republics becomes insufficient for deposits in shales. In the present article a mathematical model of the flow in nanoporous rocks is proposed. The model assumes the rock consists of two components: (i) a matrix, which is more or less an ordinary porous or fissurized-porous medium, and (ii) specific organic inclusions composed of kerogen. These inclusions may have substantial porosity but, due to the nanoscale of pores, tubes, and channels, have extremely low permeability on the order of a nanodarcy (~109-²¹ m² ) or less. These inclusions contain the majority of fluid: oil and gas. Our model is based on the hypothesis that the permeability of the inclusions substantially depends on the pressure gradient. At the beginning of the development of the deposit, boundary layers are formed at the boundaries of the low-permeable inclusions, where the permeability is strongly increased and intensive flow from inclusions to the matrix occurs. The resulting formulae for the production rate of the deposit are presented in explicit form. The formulae demonstrate that the production rate of deposits decays with time following a power law whose exponent lies between -1/2 and -1. Processing of experimental data obtained from various oil and gas deposits in shales demonstrated an instructive agreement with the prediction of the model.

The Inclusion Potential of Student Production of Digital Learning Objects

DEFF Research Database (Denmark)

Levinsen, Karin Tweddell; Sørensen, Birgitte Holm

2016-01-01

This account of the inclusion potential of students’ digital production is based on the large-scale research and development project Students’ Digital Production and Students as Learning Designers (2013–2015), funded by the Danish Ministry of Education. The target groups were primary and lower......-designed framework that accommodates and empowers students’ agency. The Danish parliament passed the Law of Inclusion In 2012 with the objective that by 2015, 96% of all students would be included in normal classes. Inclusion was not part of the initial research agenda, but this changed unexpectedly during...... the project. Specifically, students who did not participate or participated only sporadically in everyday school activities at the beginning of the project adopted new positions as participants and agents. We understand these changes as inclusive processes initiated by the combination of teacher...

Generalized Roe's numerical scheme for a two-fluid model

International Nuclear Information System (INIS)

Toumi, I.; Raymond, P.

1993-01-01

This paper is devoted to a mathematical and numerical study of a six equation two-fluid model. We will prove that the model is strictly hyperbolic due to the inclusion of the virtual mass force term in the phasic momentum equations. The two-fluid model is naturally written under a nonconservative form. To solve the nonlinear Riemann problem for this nonconservative hyperbolic system, a generalized Roe's approximate Riemann solver, is used, based on a linearization of the nonconservative terms. A Godunov type numerical scheme is built, using this approximate Riemann solver. 10 refs., 5 figs,

CO2-SO3-rich (carbonate-sulfate) melt/fluids in the lithosphere beneath El Hierro, Canary Islands.

Science.gov (United States)

Oglialoro, E.; Ferrando, S.; Malaspina, N.; Villa, I. M.; Frezzotti, M. L.

2015-12-01

Mantle xenoliths from the island of El Hierro, the youngest of the Canary Islands, have been studied to characterize fluxes of carbon in the lithosphere of an OIB volcanism region. Fifteen xenoliths (4-10 cm in diameter) were collected in a rift lava flow (15-41 ka) at a new xenolith locality in El Julan cliff (S-SW of the island). Peridotites consist of protogranular to porphyroblastic spinel harzburgites, lherzolites, and subordinate dunites. One spinel clinopyroxenite, and one olivine-websterite were also analyzed. Ultramafic xenoliths were classified as HEXO (harzburgite and dunite with exsolved orthopyroxene), HLCO (harzburgite and lherzolite containing orthopyroxene without visible exsolution lamellae), and HTR (transitional harzburgite with exsolved orthopyroxene porphyroclasts, and poikilitic orthopyroxene) following [1]. While HLCO and HTR peridotites contain mostly CO2 fluid inclusions, HEXO peridotites preserve an early association of melt/fluid inclusions containing dominantly carbonate/sulfate/silicate glass, evolving to carbonate/sulfate/phosphate/spinel aggregates, with exsolved CO2 (± carbonates, anhydrite and H2O). Chemical and Raman analyses identify dolomite, Mg-calcite, anhydrite, sulfohalite [Na6(SO4)2FCl] (± other anhydrous and hydrous alkali-sulfates), apatite, and Cr-spinel in the inclusions. Sulfides are noticeably absent. The microstructure and chemical composition of the metasomatic fluids indicate that the peridotites were infiltrated by a carbonate-sulfate-silicate melt/fluid enriched in CO2, H2O, and P. A mantle origin for this fluid is supported by high densities of CO2inclusions (> 1g/cm3), determined by Raman microspectroscopy and cross-checked by microthermometry. Consequently, El Julan peridotites provide the first evidence for liberating oxidized C and S fluxes from the Earth lithosphere in an OIB source region, and suggest that oxidation of sulfide to sulfate can occur during small-degree partial melting of the upper mantle

Predicting fluid responsiveness with transthoracic echocardiography is not yet evidence based

DEFF Research Database (Denmark)

Wetterslev, M; Haase, N; Johansen, R R

2013-01-01

an integrated tool in the intensive care unit, this systematic review examined studies evaluating the predictive value of TTE for fluid responsiveness. In October 2012, we searched Pubmed, EMBASE and Web of Science for studies evaluating the predictive value of TTE-derived variables for fluid responsiveness...... responsiveness. Of the 4294 evaluated citations, only one study fully met our inclusion criteria. In this study, the predictive value of variations in inferior vena cava diameter (> 16%) for fluid responsiveness was moderate with sensitivity of 71% [95% confidence interval (CI) 44-90], specificity of 100% (95......% CI 73-100) and an area under the receiver operating curve of 0.90 (95% CI 0.73-0.98). Only one study of TTE-based methods fulfilled the criteria for valid assessment of fluid responsiveness. Before recommending the use of TTE in predicting fluid responsiveness, proper evaluation including...

Educación básica e inclusión: un estudio de representaciones sociales (Primary Education and Inclusion: A Study of Social Representations (Éducation au collège et inclusion: une étude des représentations sociales (Educação básica e inclusão: um estudo de representações sociais

Directory of Open Access Journals (Sweden)

Felicita Garnique-Castro

2012-06-01

Full Text Available ResumenEste artículo se deriva de la investigación Las represen- taciones sociales sobre la inclusión. Una mirada desde el campo de la educación básica, cuyo fin fue identifi- car las representaciones sociales que sobre la inclusión de la diversidad escolar tienen los maestros, directivos y supervisores de educación básica en México. Especí- ficamente, se expone el análisis del discurso producido por aquellas profesoras denominadas colaboradoras. A partir de una metodología cualitativa, se analizan las condiciones en que se producen y circulan las repre- sentaciones sociales de estas maestras y los problemas que enfrentan en la tarea de incorporar la inclusión en las aulas escolares. Los resultados permiten identificar cómo esas representaciones sociales guían sus actitu- des, valores y comportamientos dentro del aula.AbstractThis paper is the result of Social representa- tions about inclusion. A review from the field of primary education, a research project that aimed to identify the social representations about Inclusion of diversity at schools present among teachers, management and supervi- sors in primary educations in Mexico. This paper presents the analysis of the discourse of those (female teachers called collaborating teachers. A qualitative methodology is ap- plied to analyze the circumstances in which the social representations of these teachers are produced and go round, and what prob- lems they face when incorporating inclusion in the classroom. The results show how social representations guide the teacher's attitudes, values, and behavior in the classroom.RésuméCet article découle de la recherche Les repré- sentations sociales par rapport à l'inclusion. Un regard depuis le domaine de l'éducation au collège, dont l'objectif a été celui d'iden- tifier les représentations sociales qui ont les enseignants, les directeurs, et les super- viseurs par rapport à l'inclusion de la diver- sité scolaire dans l

Nature and source of the ore-forming fluids associated with orogenic gold deposits in the Dharwar Craton

Directory of Open Access Journals (Sweden)

Biswajit Mishra

2018-05-01

Full Text Available Neoarchean orogenic gold deposits, associated with the greenstone-granite milieus in the Dharwar Craton include (1 the famous Kolar mine and the world class Hutti deposit; (2 small mines at Hira-Buddini, Uti, Ajjanahalli, and Guddadarangavanahalli; (3 prospects at Jonnagiri; and (4 old mining camps in the Gadag and Ramagiri-Penakacherla belts. The existing diametric views on the source of ore fluid for formation of these deposits include fluids exsolved from granitic melts and extracted by metamorphic devolatilization of the greenstone sequences. Lode gold mineralization occurs in structurally controlled higher order splays in variety of host rocks such as mafic/felsic greenstones, banded iron formations, volcaniclastic rocks and granitoids. Estimated metamorphic conditions of the greenstones vary from lower greenschist facies to mid-amphibolite facies and mineralizations in all the camps are associated with distinct hydrothermal alterations. Fluid inclusion microthermometric and Raman spectroscopic studies document low salinity aqueous-gaseous (H2O + CO2 ± CH4 + NaCl ore fluids, which precipitated gold and altered the host rocks in a narrow P–T window of 0.7–2.5 kbar and 215–320 °C. While the calculated fluid O- and C-isotopic values are ambiguous, S-isotopic compositions of pyrite-precipitating fluid show distinct craton-scale uniformity in terms of its reduced nature and a suggested crustal sulfur source.Available ages on greenstone metamorphism, granitoid plutonism and mineralization in the Hutti Belt are tantamount, making a geochronology-based resolution of the existing debate on the metamorphic vs. magmatic fluid source impossible. In contrast, tourmaline geochemistry suggests involvement of single fluid in formation of gold mineralization, primarily derived by metamorphic devolatilization of mafic greenstones and interlayered sedimentary rocks, with minor magmatic contributions. Similarly, compositions of scheelite

A homogenization method for the analysis of a coupled fluid-structure interaction problem with inner solid structure

International Nuclear Information System (INIS)

Sigrist, Jean-Francois; Laine, Christian; Broc, Daniel

2006-01-01

. The paper has the following contents: Introduction; A homogenization method; Validation of the method; Conclusion. In conclusion, a homogenization method has been exposed in the present paper to deal with the modal analysis of a coupled fluid-structure problem that takes into account the presence of solid inner inclusions on the fluid domain. The basic theory of the developed homogenization method has been recalled. The fluid-structure interaction is described in terms of pressure-displacement with the corrective terms taking into account the confinement effect induced by the inclusion. From the theoretical point of view, the method is furthermore demonstrated to be physically consistent in terms of total mass conservation. The method is validated on a generic 2D case, by a comparison of calculation performed on the fluid-structure system with inclusions and on the fluid-structure modified problem without inclusions. The numerical results are identical both in terms of Eigen-frequencies, Eigenmodes and modal masses. The method can be applied to the modal analysis of a nuclear reactor

An evaporated seawater origin for the ore-forming brines in unconformity-related uranium deposits (Athabasca Basin, Canada): Cl/Br and δ 37Cl analysis of fluid inclusions

Science.gov (United States)

Richard, Antonin; Banks, David A.; Mercadier, Julien; Boiron, Marie-Christine; Cuney, Michel; Cathelineau, Michel

2011-05-01

Analyses of halogen concentration and stable chlorine isotope composition of fluid inclusions from hydrothermal quartz and carbonate veins spatially and temporally associated with giant unconformity-related uranium deposits from the Paleoproterozoic Athabasca Basin (Canada) were performed in order to determine the origin of chloride in the ore-forming brines. Microthermometric analyses show that samples contain variable amounts of a NaCl-rich brine (Cl concentration between 120,000 and 180,000 ppm) and a CaCl 2-rich brine (Cl concentration between 160,000 and 220,000 ppm). Molar Cl/Br ratios of fluid inclusion leachates range from ˜100 to ˜900, with most values between 150 and 350. Cl/Br ratios below 650 (seawater value) indicate that the high salinities were acquired by evaporation of seawater. Most δ 37Cl values are between -0.6‰ and 0‰ (seawater value) which is also compatible with a common evaporated seawater origin for both NaCl- and CaCl 2-rich brines. Slight discrepancies between the Cl concentration, Cl/Br, δ 37Cl data and seawater evaporation trends, indicate that the evaporated seawater underwent secondary minor modification of its composition by: (i) mixing with a minor amount of halite-dissolution brine or re-equilibration with halite during burial; (ii) dilution in a maximum of 30% of connate and/or formation waters during its migration towards the base of the Athabasca sandstones; (iii) leaching of chloride from biotites within basement rocks and (iv) water loss by hydration reactions in alteration haloes linked to uranium deposition. The chloride in uranium ore-forming brines of the Athabasca Basin has an unambiguous dominantly marine origin and has required large-scale seawater evaporation and evaporite deposition. Although the direct evidence for evaporative environments in the Athabasca Basin are lacking due to the erosion of ˜80% of the sedimentary pile, Cl/Br ratios and δ 37Cl values of brines have behaved conservatively at the basin

Influence of Variable Fluid Properties and Radiative Heat loss on ...

African Journals Online (AJOL)

Consequently, comparative analysis is also performed on the wall shear stress and local heat transfer of the present study with the available results.The results show that the inclusion variable viscosity and thermal conductivity, and radiative heat loss mechanism cause significant effects on the fluid flow velocity, temperature ...

Primary coolant circuits in FBR type reactors

International Nuclear Information System (INIS)

Kutani, Masushiro.

1985-01-01

Purpose: To eliminate the requirement of a pump for the forcive circulation of primary coolants and avoid the manufacturing difficulty of equipments. Constitution: In primary coolant circuits of an LMFBR type reactor having a recycling path forming a closed loop between a reactor core and a heat exchanger, coolants recycled through the recycling path are made of a magnetic fluid comprising liquid sodium incorporated with fine magnetic powder, and an electromagnet is disposed to the downstream of the heat exchanger. In the above-mentioned structure, since the magnetic fluid as the primary coolants losses its magnetic property when heated in the reactor core but recovers the property at a lower temperature after the completion of the heat exchange, the magnetic fluid can forcively be flown through the recycling path under the effect of the electromagnet disposed to the down stream of the heat exchanger to thereby forcively recycle the primary coolants. (Kawakami, Y.)

New geologic, fluid inclusion and stable isotope studies on the controversial Igarapé Bahia Cu-Au deposit, Carajás Province, Brazil

Science.gov (United States)

Dreher, Ana M.; Xavier, Roberto P.; Taylor, Bruce E.; Martini, Sérgio L.

2008-02-01

The Igarapé Bahia Cu-Au deposit in the Carajás Province, Brazil, is hosted by steeply dipping metavolcano-sedimentary rocks of the Igarapé Bahia Group. This group consists of a low greenschist grade unit of the Archean (˜2,750 Ma) Itacaiúnas Supergroup, in which other important Cu-Au and iron ore deposits of the Carajás region are also hosted. The orebody at Igarapé Bahia is a fragmental rock unit situated between chloritized basalt, with associated hyaloclastite, banded iron formation (BIF), and chert in the footwall and mainly coarse- to fine-grained turbidites in the hanging wall. The fragmental rock unit is a nearly concordant, 2 km long and 30-250 m thick orebody made up of heterolithic, usually matrix-supported rocks composed mainly of coarse basalt, BIF, and chert clasts derived from the footwall unit. Mineralization is confined to the fine-grained matrix and comprises disseminated to massive chalcopyrite accompanied by magnetite, gold, U- and light rare earth element (LREE)-minerals, and minor other sulfides like bornite, molybdenite, cobaltite, digenite, and pyrite. Gangue minerals include siderite, chlorite, amphibole, tourmaline, quartz, stilpnomelane, epidote, and apatite. A less important mineralization style at Igarapé Bahia is represented by late quartz-chalcopyrite-calcite veins that crosscut all rocks in the deposit area. Fluid inclusions trapped in a quartz cavity in the ore unit indicate that saline aqueous fluids (5 to 45 wt% NaCl + CaCl2 equiv), together with carbonic (CO2 ± CH4) and low-salinity aqueous carbonic (6 wt% NaCl equiv) fluids, were involved in the mineralization process. Carbonates from the fragmental layer have δ13C values from -6.7 to -13.4 per mil that indicate their origin from organic and possibly also from magmatic carbon. The δ34S values for chalcopyrite range from -1.1 to 5.6 per mil with an outlier at -10.8 per mil, implying that most sulfur is magmatic or leached from magmatic rocks, whereas a limited

A comprehensive Two-Fluid Model for Cavitation and Primary Atomization Modelling of liquid jets - Application to a large marine Diesel injector

Science.gov (United States)

Habchi, Chawki; Bohbot, Julien; Schmid, Andreas; Herrmann, Kai

2015-12-01

In this paper, a comprehensive two-fluid model is suggested in order to compute the in-nozzle cavitating flow and the primary atomization of liquid jets, simultaneously. This model has been applied to the computation of a typical large marine Diesel injector. The numerical results have shown a strong correlation between the in-nozzle cavitating flow and the ensuing spray orientation and atomization. Indeed, the results have confirmed the existence of an off-axis liquid core. This asymmetry is likely to be at the origin of the spray deviation observed experimentally. In addition, the primary atomization begins very close to the orifice exit as in the experiments, and the smallest droplets are generated due to cavitation pocket shape oscillations located at the same side, inside the orifice.

Calcite Fluid Inclusion, Paragenetic, and Oxygen Isotopic Records of Thermal Event(s) at Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Peterman, B.; Moscati, R.

2000-01-01

Yucca Mountain, Nevada, is under consideration as a potential high-level radioactive waste repository situated above the water table in 12.7 Ma tuffs. A wealth of textural and geochemical evidence from low-temperature deposits of calcite and silica, indicates that their genesis is related to unsaturated zone (UZ) percolation and that the level of the potential repository has never been saturated. Nonetheless, some scientists contend that thermal waters have periodically risen to the surface depositing calcite and opal in the tuffs and at the surface. This hypothesis received some support in 1996 when two-phase fluid inclusions (FIs) with homogenization temperatures (Th) between 35 and 75 C were reported from UZ calcite. Calcite deposition likely followed closely on the cooling of the tuffs and continues into the present. The paragenetic sequence of calcite and silica in the UZ is early stage calcite followed by chalcedony and quartz, then calcite with local opal during middle and late stages. Four types of FIs are found in calcite assemblages: (1) all-liquid (L); (2) all-vapor (V); (3) 2-phase with large and variable V:L ratios; and (4) a few 2-phase with small and consistent V:L ratios. Late calcite contains no FI assemblages indicating elevated depositional temperatures. In early calcite, the Th of type 4 FIs ranges from ∼ 40 to ∼ 85 C. Such temperatures (sub-boiling) and the assemblage of FIs are consistent with deposition in the UZ. Some delta 18O values < 10 permil in early calcite support such temperatures. Type 4 FIs, however, seem to be restricted to the early calcite stage, during which either cooling of the tuffs or regional volcanism were possible heat sources. Nonetheless, at present there is no compelling evidence of upwelling water as a source for the calcite/opal deposits

Precise oxygen and hydrogen isotope determination in nanoliter quantities of speleothem inclusion water by cavity ring-down spectroscopic techniques

Science.gov (United States)

Uemura, Ryu; Nakamoto, Masashi; Asami, Ryuji; Mishima, Satoru; Gibo, Masakazu; Masaka, Kosuke; Jin-Ping, Chen; Wu, Chung-Che; Chang, Yu-Wei; Shen, Chuan-Chou

2016-01-01

Speleothem inclusion-water isotope compositions are a promising new climatic proxy, but their applicability is limited by their low content in water and by analytical challenges. We have developed a precise and accurate isotopic technique that is based on cavity ring-down spectroscopy (CRDS). This method features a newly developed crushing apparatus, a refined sample extraction line, careful evaluation of the water/carbonate adsorption effect. After crushing chipped speleothem in a newly-developed crushing device, released inclusion water is purified and mixed with a limited amount of nitrogen gas in the extraction line for CRDS measurement. We have measured 50-260 nL of inclusion water from 77 to 286 mg of stalagmite deposits sampled from Gyokusen Cave, Okinawa Island, Japan. The small sample size requirement demonstrates that our analytical technique can offer high-resolution inclusion water-based paleoclimate reconstructions. The 1σ reproducibility for different stalagmites ranges from ±0.05 to 0.61‰ for δ18O and ±0.0 to 2.9‰ for δD. The δD vs. δ18O plot for inclusion water from modern stalagmites is consistent with the local meteoric water line. The 1000 ln α values based on calcite and fluid inclusion measurements from decades-old stalagmites are in agreement with the data from present-day farmed calcite experiment. Combination of coeval carbonate and fluid inclusion data suggests that past temperatures at 9-10 thousand years ago (ka) and 26 ka were 3.4 ± 0.7 °C and 8.2 ± 2.4 °C colder than at present, respectively.

Inclusive education in schools in rural areas

Directory of Open Access Journals (Sweden)

J. Antonio Callado Moreno

2015-07-01

Full Text Available Since Spain decided to embark on the development of inclusive schooling, studies have taken place to see if the inclusive principle is being developed satisfactorily. Inclusive schooling implies that all students, regardless of their particular characteristics, may be taught in ordinary schools, and in the majority of cases receive help in the classroom in which they have been integrated in order to cover any special educational needs. Our research aims to find out if schools situated in rural areas follow this principle and, once it has been put into practice, what strategies are being used. To this end, we designed a questionnaire addressed to Infant and Primary school teachers in the Sierra Sur area in the province of Jaén, in an agricultural context where most of the population live on olive picking and the cultivation of olive groves. Given the extension of the area, our research concentrated on schools situated in urban nuclei with a population of less than one thousand five hundred inhabitants. The results obtained demonstrate that rural areas do not take full advantage of the context they are in to favour inclusion processes and continue to develop proposals that are merely integrative.

Education as a right in international treatie: A reading from inclusive education

Directory of Open Access Journals (Sweden)

María Montanchez Torres

2015-12-01

Full Text Available This article presents a theoretical review of education as a right, in international treaties and the evolution of the concept of inclusive education from a diverse multi and intercultural perspective. This article is part of a doctoral thesis from Valencia, Spain, researched in Ecuador. Inclusive education proposes quality education for everyone, demanding a response from competent institutions to develop a tolerant culture to difference in defense of human rights and equal opportunity. This essay facilitates guidelines that develop and support the construction of inclusive classrooms by education professionals at a primary school level as well as at a university level.

FRACTURING FLUID CHARACTERIZATION FACILITY

Energy Technology Data Exchange (ETDEWEB)

Subhash Shah

2000-08-01

Hydraulic fracturing technology has been successfully applied for well stimulation of low and high permeability reservoirs for numerous years. Treatment optimization and improved economics have always been the key to the success and it is more so when the reservoirs under consideration are marginal. Fluids are widely used for the stimulation of wells. The Fracturing Fluid Characterization Facility (FFCF) has been established to provide the accurate prediction of the behavior of complex fracturing fluids under downhole conditions. The primary focus of the facility is to provide valuable insight into the various mechanisms that govern the flow of fracturing fluids and slurries through hydraulically created fractures. During the time between September 30, 1992, and March 31, 2000, the research efforts were devoted to the areas of fluid rheology, proppant transport, proppant flowback, dynamic fluid loss, perforation pressure losses, and frictional pressure losses. In this regard, a unique above-the-ground fracture simulator was designed and constructed at the FFCF, labeled ''The High Pressure Simulator'' (HPS). The FFCF is now available to industry for characterizing and understanding the behavior of complex fluid systems. To better reflect and encompass the broad spectrum of the petroleum industry, the FFCF now operates under a new name of ''The Well Construction Technology Center'' (WCTC). This report documents the summary of the activities performed during 1992-2000 at the FFCF.

Evaluation of primary/preferred language data collection.

Science.gov (United States)

Duong, Linh M; Singh, Simple D; Buchanan, Natasha; Phillips, Joan L; Gerlach, Ken

2012-01-01

A literature review was conducted to identify peer-reviewed articles related to primary/preferred language and interpreter-use data collection practices in hospitals, clinics, and outpatient settings to assess its completeness and quality. In January 2011, Embase (Ovid), MEDLINE (Ovid), PubMed, and Web of Science databases were searched for eligible studies. Primary and secondary inclusion criteria were applied to selected eligible articles. This extensive literature search yielded 768 articles after duplicates were removed. After primary and secondary inclusion criteria were applied, 28 eligible articles remained for data abstraction. All 28 articles in this review reported collecting primary/preferred language data, but only 18% (5/28) collected information on interpreter use. This review revealed that there remains variability in the way that primary/preferred language and interpreter use data are collected; all studies used various methodologies for evaluating and abstracting these data. Likewise, the sources from which the data were abstracted differed.

System for chemical decontamination of nuclear reactor primary systems

International Nuclear Information System (INIS)

Schlonski, J.S.; McGiure, M.F.; Corpora, G.J.

1992-01-01

This patent describes a method of chemically decontaminating a nuclear reactor primary system, having a residual heat removal system with one or more residual heat removal heat exchangers, each having an upstream and a downstream side, at or above ambient pressure. It comprises: injecting decontamination chemicals using an injection means; circulating the injected decontamination chemicals throughout the primary system; directing the circulated decontamination chemicals and process fluids to a means for removing suspended solids and dissolved materials after the circulated chemicals and process fluids have passed through the residual heat removal heat exchanger; decontaminating the process fluids; and feeding the decontaminated process fluids to the injection means. This patent also describes a chemical decontamination system for use at, or above, ambient pressure in a nuclear reactor primary system having a residual heat removal system. It comprises: means for injecting decontamination chemicals into the primary system; means for removing dissolved and suspended materials and decontamination chemicals from the primary system; one or more residual heat removal pumps; means located downstream of one of the residual heat removal heat exchangers; and a return line connecting the means

Inclusion of Children with Autism Spectrum Disorders: Listening and Hearing to Voices from the Grassroots

Science.gov (United States)

Majoko, Tawanda

2016-01-01

The current significantly high prevalence rates of autism spectrum disorder (ASD) coupled with the paradigm shift from exclusive to inclusive education warrants research on inclusion of children with ASD in mainstream classrooms in Zimbabwe. A qualitative methodology was used to interview 21 regular primary school teachers regarding social…

Geochemistry and fluid characteristics of the Dalli porphyry Cu-Au deposit, Central Iran

Science.gov (United States)

Zarasvandi, Alireza; Rezaei, Mohsen; Raith, Johann; Lentz, David; Azimzadeh, Amir-Mortaza; Pourkaseb, Hooshang

2015-11-01

The Miocene Dalli porphyry Cu-Au deposit in the central part of Urumieh-Dokhtar magmatic arc is the first reported Au-rich porphyry Cu deposit in the Zagros orogenic belt. The Cu-Au mineralization is mainly hosted in diorite and quartz diorite intrusions, presenting as numerous veinlets in the altered wall rocks, with potassic, phyllic, and propylitic alteration developed. Based on the mineral assemblages and crosscutting relations of veinlets, hydrothermal mineralization-alteration occurred in at least three stages, characterized by veinlets of (1) Qtz + Kfs + Mag ± Ccp, (2) Qtz + Py + Ccp ± Bn ± Cv ± Cc and, (3) Qtz + Chl + Bt. The ore-bearing intrusions exhibit typical geochemical characteristics of subduction zone magmas, including LREE fractionated pattern, strong enrichment in LILE (Cs, Rb, Ba, Pb, and U), and depletion of HFSE, with marked negative Ti and Nb anomalies. The adakite-like ore-hosting porphyry intrusions are characterized by a systematic gradual decreasing and increasing of Y and Eu/Eu∗ with increasing SiO2 content, respectively. Moreover, they exhibit a significant increasing trend of Sr/Y with decreasing of Y, which indicates progressive hornblende fractionation and suppression of plagioclase fractionation during the evolution toward high water content of parental magma. A relatively flat HREE pattern with low Dyn/Ybn and Nb/Ta values may represent that amphibole played a more important role than garnet in the generation of the adakitic melts in the thickened lower crust. Based on the phase assemblages confirmed by detailed laser Raman spectroscopy analyses and proportion of solid, liquid, and gaseous components, five types of fluid inclusions were recognized, which are categorized as; (1) liquid-rich two phase (liquidH2O + vaporH2O) (IIA), (2) vapor-rich two phase (vaporH2O/CO2 + liquidH2O) (IIB), (3) high saline simple fluids (IIIA; liquidH2O + vaporH2O + Hl), (4) high saline opaque mineral-bearing fluids (IIIB; liquidH2O + vaporH2O

Thermal development of the laminar flow of a Bingham fluid between two plane plates with viscous dissipation

Energy Technology Data Exchange (ETDEWEB)

Boualit, A.; Boualit, S. [Unite de recherche appliquee en energies renouvelables, Ghardaia (Algeria); Zeraibi, N. [Universite de Boumerdes, Faculte des hydrocarbures dept. Transport et equipement, Boumerdes (Algeria); Amoura, M. [Universite des Sciences et de la Technologie Houari Boumedienne, Faculte de Physique, Dept. Energetique, Alger (Algeria)

2011-01-15

The thermal development of the hydrodynamically developing laminar flow of a viscoplastic fluid (fluid of Bingham) between two plane plates maintained at a constant temperature has been studied numerically. This analysis has shown the effect caused by inertia and the rheological behaviour of the fluid on the velocity, pressure and temperature fields. The effects of Bingham and Peclet numbers on the Nusselt values with the inclusion of viscous dissipation are also discussed. (authors)

Mineralogical aspects of fluid migration in the Salt Block II experiment

International Nuclear Information System (INIS)

Lambert, S.J.

1980-05-01

A block of evaporite rock containing the mineral assemblage halite (88%) - polyhalite (8%) - sylvite (4%) was machined into a cylinder one meter in diameter and one meter high, and was fitted with an axial heater, thermocouples and an off-gas collection system. After about 100 days of heating, identification of mineral efflorescences at the heater hole (carnallite and bischofite) showed that a significant portion of the 111 grams of water recovered (out of around 8500 grams available in the rock) migrated as a liquid, not as a vapor. A microscopic examination of rock slices from within 15 cm of the heater hole (where the temperature was 100 to 200 0 C, and the gradient was 3 to 15 0 C/cm) revealed that: (1) fluid inclusions had migrated, but rarely across grain boundaries; (2) fluid inclusions had not been mobilized at distances greater than about 15 cm from the heater hole; and (3) intergranular liquid had been conspicuously mobilized within 15 cm of the heater hole

The Attitudes of Teachers towards Inclusive Education in Vojvodina

Science.gov (United States)

Galovic, Dragana; Brojcin, Branislav; Glumbic, Nenad

2014-01-01

The aim of this study was to examine the attitudes of preschool, primary, secondary and high school teachers towards inclusive education of children with special educational needs. In addition, the study established the correlation between these attitudes and gender, education level, teaching experience, formal training in the special education…

Confronting New Demands : Inclusive Growth, Inclusive Trade ...

International Development Research Centre (IDRC) Digital Library (Canada)

Confronting New Demands : Inclusive Growth, Inclusive Trade. Policymakers, businesspeople and civil society advocates need evidence-based research to react ... understood implications, such as labour standards and intellectual property; ...

Extension of Generalized Fluid System Simulation Program's Fluid Property Database

Science.gov (United States)

Patel, Kishan

2011-01-01

This internship focused on the development of additional capabilities for the General Fluid Systems Simulation Program (GFSSP). GFSSP is a thermo-fluid code used to evaluate system performance by a finite volume-based network analysis method. The program was developed primarily to analyze the complex internal flow of propulsion systems and is capable of solving many problems related to thermodynamics and fluid mechanics. GFSSP is integrated with thermodynamic programs that provide fluid properties for sub-cooled, superheated, and saturation states. For fluids that are not included in the thermodynamic property program, look-up property tables can be provided. The look-up property tables of the current release version can only handle sub-cooled and superheated states. The primary purpose of the internship was to extend the look-up tables to handle saturated states. This involves a) generation of a property table using REFPROP, a thermodynamic property program that is widely used, and b) modifications of the Fortran source code to read in an additional property table containing saturation data for both saturated liquid and saturated vapor states. Also, a method was implemented to calculate the thermodynamic properties of user-fluids within the saturation region, given values of pressure and enthalpy. These additions required new code to be written, and older code had to be adjusted to accommodate the new capabilities. Ultimately, the changes will lead to the incorporation of this new capability in future versions of GFSSP. This paper describes the development and validation of the new capability.

Age constraints on fluid inclusions in calcite at Yucca Mountain

International Nuclear Information System (INIS)

Neymark, Leonid A.; Amelin, Yuri V.; Paces, James B.; Peterman, Zell E.; Whelan, Joseph F.

2001-01-01

The(sup 207)Pb/(sup 235)U ages for 14 subsamples of opal or chalcedony layers younger than calcite formed at elevated temperature range between 1.88(+-) 0.05 and 9.7(+-) 1.5 Ma with most values older than 6-8 Ma. These data indicate that fluids with elevated temperatures have not been present in the unsaturated zone at Yucca Mountain since about 1.9 Ma and most likely since 6-8 Ma. Discordant U-Pb isotope data for chalcedony subsamples representing the massive silica stage in the formation of the coatings are interpreted using a model of the diffusive loss of U decay products. The model gives an age estimate for the time of chalcedony formation around 10-11 Ma, which overlaps ages of clay minerals formed in tuffs below the water table at Yucca Mountain during the Timber Mountain thermal event

Effect of rock rheology on fluid leak- off during hydraulic fracturing

Science.gov (United States)

Yarushina, V. M.; Bercovici, D.; Oristaglio, M. L.

2012-04-01

of permanent, time-independent (plastic) rock deformation significantly increases the pore space compressibility (compaction), which becomes a leading term in the total compressibility. Inclusion of rock and fluid compressibilities in the model can explain both linear and nonlinear leak­off. In particular, inclusion of rock compaction and decompaction may be important for description of naturally fractured and tight gas reservoirs for which very strong dependence of permeability on porosity has been reported. Carter R.D. Derivation of the general equation for estimating the extent of the fractured area. Appendix I of "Optimum fluid characteristics for fracture extension", Drilling and Production Practice, G.C. Howard and C.R.Fast, New York, New York, USA, American Petroleum Institute (1957), 261-269.

40Ar/39Ar laser-probe dating of diamond inclusions from the Premier kimberlite

International Nuclear Information System (INIS)

Phillips, D.; Onstott, T.C.; Harris, J.W.; Strathclyde Univ., Glasgow

1989-01-01

Inclusions encapsulated by diamonds at the time of their formation provide a means for determining diamond crystallization ages and the chemistry of the surrounding upper mantle at that time. Sm-Nd studies of peridotitic inclusions, from Cretaceous-age kimberlites in southern Africa, suggest that the diamonds formed 3.3 Gyr ago. By contrast, eclogite-suite inclusions generally yield younger ages, sometimes approaching the time of kimberlite eruption. Here we report the results of 40 Ar/ 39 Ar laser-probe analyses of individual eclogitic clinopyroxene inclusions from Premier diamonds, which yield a mean age of 1,198±14 Myr. This age agrees well with Sm-Nd and 40 Ar/ 39 Ar analyses on similar Premier inclusions, and is indistinguishable from the inferred time of emplacement of the host kimberlite (1,150-1,230 Myr), which implies that diamond formation was essentially synchronous with kimberlite generation. The extrapolated non-radiogenic 40 Ar/ 36 Ar ratio of 334±102 is similar to the present-day atmospheric composition. This value is inconsistent with Sr and Nd isotopic signatures from Premier eclogite inclusions, which suggest a depleted mantle source ( 40 Ar/ 36 Ar>20,000). Pre-entrapment equilibration of the inclusions with an 36 Ar-rich fluid is the most probable explanation for the low non-radiogenic ( 40 Ar/ 36 Ar) composition. (author)

Developing a financial inclusion index and inclusive growth in India

OpenAIRE

Susanta Kumar SETHY

2016-01-01

Financial inclusion is one of the systems through which Inclusive Growth can be achieved in developing countries like India where large sections are unable or hopeless to contribute in the financial system. An inclusive financial system mobilizes more resources for productive purposes leading to higher economic growth, better opportunities and reduction of poverty. This study, proposed an Index of financial inclusion – a multidimensional measure. The Financial Inclusion Index c...

A comprehensive Two-Fluid Model for Cavitation and Primary Atomization Modelling of liquid jets - Application to a large marine Diesel injector

International Nuclear Information System (INIS)

Habchi, Chawki; Bohbot, Julien; Schmid, Andreas; Herrmann, Kai

2015-01-01

In this paper, a comprehensive two-fluid model is suggested in order to compute the in-nozzle cavitating flow and the primary atomization of liquid jets, simultaneously. This model has been applied to the computation of a typical large marine Diesel injector. The numerical results have shown a strong correlation between the in-nozzle cavitating flow and the ensuing spray orientation and atomization. Indeed, the results have confirmed the existence of an off-axis liquid core. This asymmetry is likely to be at the origin of the spray deviation observed experimentally. In addition, the primary atomization begins very close to the orifice exit as in the experiments, and the smallest droplets are generated due to cavitation pocket shape oscillations located at the same side, inside the orifice. (paper)

Inclusivity of Technical Education in the Context of Teacher ...

African Journals Online (AJOL)

This paper, focusing on a case study at United College of Education, seeks to establish the extent to which primary teacher education institutions practise inclusivity in the teaching and learning of technical subjects. A qualitative study was adopted to gather data using focus group discussions and interviews. The research ...

Building Inclusive Processes for School Improvement: A Case Study

Science.gov (United States)

Arnaiz, Pilar; Escarbajal, Andrés; Guirao, José Manuel; Martínez, Rogelio

2016-01-01

This paper presents a study carried out in a nursery and primary school in order to ascertain the level of self-assessment undertaken by teachers with respect to their educational processes using the "ACADI" instrument, "School-based self-assessment of diversity awareness from an inclusive approach." The objective was to…

Reading for Meaning: Problematizing Inclusion in Indonesian Civic Education

Science.gov (United States)

Fearnley-Sander, Mary; Moss, Julianne; Harbon, Lesley

2004-01-01

This paper reports on the use of the "Index for Inclusion" in five socioeconomically different primary school contexts in Indonesia. The research was designed and developed through Australian and Indonesian teachers and teacher educators collaborative efforts over a year. The work took place during the post-Suharto reform period and…

Autonomy, Independence, Inclusion

Directory of Open Access Journals (Sweden)

Filippo Angelucci

2015-04-01

Full Text Available The living environment must not only meet the primary needs of living, but also the expectations of improvement of life and social relations and people’s work. The need for a living environment that responds to the needs of users with their different abilities, outside of standardizations, is increasingly felt as autonomy, independence and well-being are the result of real usability and adaptability of the spaces. The project to improve the inclusivity of living space and to promote the rehabilitation of fragile users need to be characterized as an interdisciplinary process in which the integration of specialized contributions leads to adaptive customization of space solutions and technological that evolve with the changing needs, functional capacities and abilities of individuals.

Does financial inclusion affect monetary policy in SAARC countries?

Directory of Open Access Journals (Sweden)

Sanjaya Kumar Lenka

2016-12-01

Full Text Available Alike the role of heart for human body, finance is the focal point of an economy, whereas savings and investment are its tubes and vessels. Hence, a solid financial system is a fundamental character of an enduring economy. The frozen financial system endures longer if its foundation is concrete and subsists in the people of grass-root level. They are those, who live in villages and small towns, earn meager income, work in primary sector, spend more on food, and have lesser social securities. In this setting, the process of bringing these people into the main stream of financial activities is called financial inclusion. This study describes the impact of financial inclusion on monetary policy of South Asian Association for Regional Cooperation (SAARC countries from 2004–2013. The study uses principal component analysis (PCA to construct a Financial Inclusion Index that serves as a proxy variable for the accessibility of financial inclusion in the SAARC countries. Adding to it, three different models like FEM, REM, and Panel-corrected standard errors are used for the analysis. In this study, an empirical result of generalized least square(GLS estimation shows that financial inclusion, exchange rate, and interest rate are negatively associated with inflation in SAARC countries.

PROFESSIONAL PREPAREDNESS OF FUTURE TEACHERS TO WORK WITH DISABLED STUDENTS IN CONDITIONS OF INCLUSIVE PRACTICE

Directory of Open Access Journals (Sweden)

I. V. Ivenskih

2018-01-01

Full Text Available Introduction: In the article we consider the structure of psychological preparedness of future teachers of the primary education level to work with students in the conditions of inclusive education. The following components are pointed out: motivation and values – the component which presupposes the formation of a new value – transformation of the direct relationship with a child into an indirect sociocultural relationship; activity component, which presupposes that a teacher has an ability not only to analyze their professional activity but also to create new situations of inclusive practice, to be more precise, a teacher should be able to plan the individual trajectory of each student’s development and create new ways of academic communication and new forms of academic interaction at the lesson; reflective-evaluative component, which presupposes that a future teacher has an ability to assess the achievements of each student while mastering an educational program, putting a special emphasis on the student’s individual success and progress in the process of his training, education and development. For this reason, at the stage of training future teachers of the primary education level at university they are to attend lectures aimed at educating them in the field of psychology and pedagogics concerning the peculiarities of the age psychic development and general psychic development of disabled children in primary school taking into consideration the specificity of student integration, the zones of actual and perspective development of a child, specific features of interdisciplinary and collective interaction of the specialists working with these children. Future teachers are also to be engaged in practical work of both types – on the campus and off-campus.Results: The article is devoted to the problem of specific features of professional preparedness of future teachers of the primary education level to work with students in the

Petrology and geochemistry of primary magmas trapped in melt inclusions in scoria of Beaunit Maar (Chaîne des Puys, Massif Central, France)

Science.gov (United States)

Jannot, S.; Schiano, P.; Boivin, P.; Clocchiatti, R.; Chazot, G.

2003-04-01

The Massif Central area, characterized by a typical intraplate alkaline serie, is the largest magmatic province of the West-European Rift system. Although it has been the subject of several studies, the nature of Massif Central sources is still a matter of debate and many hypotheses are proposed, including deep-rooted continental hotspot, metasomatised spinel lherzolites and an asthenospheric flow linked to the lithospheric root of the Alpine chain. The Chaîne des Puys is the last magmatic province of the French Massif Central and is composed of hundred young well-preserved volcanoes. The present work aims to supply information on the nature and the origin of the source chemistry of alkaline serie from the Chaîne des Puys, by characterizing the trace and major element composition of minute melts preserved as quenched glass inclusions inside olivines phenocrysts in scoria from the Beaunit Maar. Heating stage experiments performed at ambient pressure on partially crystallised primary melt inclusions suggest CO_2 oversaturation of the trapped melt, and an entrapment temperature around 1200^oC±10^oC. Daughter minerals analyses point to a Ti-and Ca-rich basaltic paragenesis, in good agreement with that of erupted basalts from the Chaîne des Puys. Major element compositions show that melts trapped in inclusions evolve by limited fractional crystallization. Inclusions trapped in the more primitive olivine phenocrysts (Fo85) have alkali-basalt compositions that fall on the primitive end of the compositional trend define by the lavas of the Chaîne des Puys. Their major element chemistry rules out the hypothesis of a mantle source in the spinel stability field and requires a garnet-bearing mantle source. Analyzed for trace-element composition by LA-ICP-MS, they display homogeneous, enriched patterns, similar to those characterizing oceanic island and continental basalts. They have high concentration of LILE and LREE/HREE ratios. Such trace-element feature are typical of

Characterization of fluids associated to mineral paragenesis of uraniferous albitites and their gnessic embedding rocks from Lagoa da Rabicha Uranium Deposit, Lagoa Real, BA, Brazil

International Nuclear Information System (INIS)

Oliveira, Lucilia Aparecida Ramos de

2010-01-01

uraninite remobilization and precipitation. This uranium remobilization and precipitation was also registered in garnets, formed from aquo-salines fluids with Na, Mg, Sr, Ba and Pb, under temperatures and salinities conditions close to those of pyroxene. In the studied samples it was not found the precocious diopsidic pyroxene (magmatic), with aquo-salines fluids [H 2 0 + Na, Rb, Ba (l6%wt Na Cl)], studies by Chaves et al (2007) in Cachoeira Mine (Anomaly 13, north of Lagoa Real). This is probably a consequence of a more intense metamorphism in the Rabicha sector when compared to Cachoeira Mine region, preserving very little the pre-existing magmatic texture. It is worthy to note that occurs a dilution of the fluids present in pyroxene and garoet, when the uranium occurrences are observed in the N -> S direction (AN13 -> AN09 ->AN03). It was also observed that the amphibole volume increases in the center and north portion of Lagoa Real. The plagioclase precipitation (which forms the albitite structure) occurred lately from a less saline fluid, probably with little or no associated C02. One uranium remobilization and precipitation is also associated to this phase. In the studied samples carbonate was not found. It was not possible to compare data with some preliminary data from Fuzikawa (1982) in primary fluids from carbonate, where the presence of aquo-carbonic solutions (H 2 0 + CO 2 +CH 4 ) suggest reducing conditions for this evolutionary phase. The fluid inclusion studies in albitites host rocks were focused in plagioclase, in order to compare the solutions associated to the sodium metassomatism that would have affected the mineralized bodies and host rocks. In the gneisses it was registered the presence of precocious aquo-carbonic fluids with intermediate salinities, associated do precocious plagioclases. However, the solutions that precipitate the late plagioclase had aquo-saline composition with low salinity, similar to those found in plagioclase from albitites. Late

Autonomic Neuropathy and Albuminocytologic Dissociation in Cerebrospinal Fluid As the Presenting Features of Primary Amyloidosis: A Case Report

Directory of Open Access Journals (Sweden)

Jingjing Li

2017-07-01

Full Text Available ObjectivePrimary amyloidosis is a disease with a poor prognosis and multi-organ involvement. Here, we report the clinical and pathological features of a patient with primary amyloidosis featuring autonomic neuropathy as the initial symptom and albuminocytologic dissociation in the cerebrospinal fluid (CSF.MethodsThe patient was a 60-year-old Chinese male with numbness, orthostatic hypotension, and gastrointestinal symptoms. For diagnosis, we performed an electromyogram (EMG, lumbar puncture, Bence Jones protein urine test, serum electrophoresis blood test, sural nerve and rectal membrane biopsies, transthyretin (TTR gene sequencing, and bone marrow puncture.ResultsCongo red staining of sural nerve and rectal membrane biopsies showed amyloid deposition and apple-green birefringence was visualized under polarized light microscopy. TTR gene sequencing showed no causative mutation. Following lumbar puncture, normal CSF cell counts and elevated CSF protein concentration (1,680 mg/L were detected. Bone marrow puncture showed that out of the total number of whole blood cells, 0.56% were abnormal plasma cells and that 87.4% of the total number of plasma cells were abnormal. EMG results showed mixed peripheral nerve damage predominately in the sensory nerve fibers.ConclusionObvious symptoms of neuropathy, particularly autonomic neuropathy, albuminocytologic dissociation, and organ function damage suggested a diagnosis of amyloidosis. In such patients, neurologists should use caution to differentiate between chronic inflammatory demyelinating polyneuropathy, primary amyloidosis, and familial amyloid neuropathy.

Enhanced inertia from lossy effective fluids using multi-scale sonic crystals

Directory of Open Access Journals (Sweden)

Matthew D. Guild

2014-12-01

Full Text Available In this work, a recent theoretically predicted phenomenon of enhanced permittivity with electromagnetic waves using lossy materials is investigated for the analogous case of mass density and acoustic waves, which represents inertial enhancement. Starting from fundamental relationships for the homogenized quasi-static effective density of a fluid host with fluid inclusions, theoretical expressions are developed for the conditions on the real and imaginary parts of the constitutive fluids to have inertial enhancement, which are verified with numerical simulations. Realizable structures are designed to demonstrate this phenomenon using multi-scale sonic crystals, which are fabricated using a 3D printer and tested in an acoustic impedance tube, yielding good agreement with the theoretical predictions and demonstrating enhanced inertia.

Physiologic effects of intravenous fluid administration in healthy volunteers

DEFF Research Database (Denmark)

Holte, Kathrine; Jensen, Peter; Kehlet, Henrik

2003-01-01

, infusion of the fluid over 3 h in the morning, and additionally 24-h hospitalization under standardized conditions. Primary outcome assessments were pulmonary function (spirometry), exercise capacity (submaximal treadmill test), balance function (BalanceMaster), and weight. Infusion of 40 mL/kg of lactated...... by fluid administration. These findings may serve as a basis for clinical studies applying the same type of fluid in different amounts to determine the optimal amount of perioperative fluid in various surgical procedures. IMPLICATIONS: Infusion of 40 mL/kg of lactated Ringer's solution in volunteers led...

Origin and mobility of hydrocarbon gases in alkaline plutons : the example of the Khibina complex, NW Russia

Energy Technology Data Exchange (ETDEWEB)

Treloar, P.J.; Beeskow, B.; Rankin, A.H. [Kingston Univ., Kingston upon Thames (United Kingdom). School of Earth Sciences; Potter, J. [Western Ontario Univ., London, ON (Canada). Dept. of Earth Science; Nivin, V. [Geological Inst., Apatity (Russian Federation). Kola Science Centre

2006-07-01

The origin and distribution of abiogenic hydrocarbon gases (HCGs) was discussed with particular reference to HCGs in the Khibina pluton which are dominated by methane (CH{sub 4}) with minor amounts of higher hydrocarbons and hydrogen (H{sub 2}). Although isotopic data and hydrocarbon species ratios point to an abiogenic source, they do not distinguish between primary magmatic hydrocarbons and those generated by late magmatic re-speciation or post-magmatic Fischer-Tropsch (FT) synthesis. Some rock textures suggest limited CH{sub 4} production by FT synthesis, but the presence of primary, syn-magmatic CH{sub 4}-rich fluid inclusions, and the absence of primary and secondary carbon dioxide (CO{sub 2}) rich inclusions, suggest a dominantly early magmatic origin for the HCGs. The permeability and porosity in the Khibina pluton can be constrained by the distribution and geometry of fluid inclusion planes (FIPs) and open cracks (OCs), as well as by the magnitude and pathways of fluid flow. Orientation data for FIPs and OCs, obtained from oriented thin sections, revealed a range of orientations in sub-parallel arrays, suggesting continual re-activation of old fracture systems. The extensive occurrence of OCs and sealed FIPs points to long lived porosities and permeabilities with large fluid fluxes integrated over time. FIP and OC density values were found to be consistent with gas release patterns characterized by spontaneous release during mining of large volumes of HCG stored in a network of interconnected, sealed microfractures and fluid inclusion planes that unzip during stress. It was determined that the HCGs have a primary magmatic origin although there is local evidence for limited post-magmatic FT synthesis. Long term continuous gas migration has occurred within the complex through an interconnected set of fractures. FIPs represent aliquots of gas sealed during open system migration. It was concluded that the complex contains a potentially economically viable

Contribution of metallic fission product inclusions to axial fuel motion potential

International Nuclear Information System (INIS)

Sasa, P.; Cronenberg, A.; Stevenson, M.

1979-01-01

In the analysis of postulated nuclear reactor accidents, axial fuel motion within the fuel pin prior to cladding failure can have an important mitigating effect. The question of primary importance is whether or not metallic inclusions have the potential to vaporize during an overheating event and thus contribute to fuel motion. To assess this potential, two limiting calculations were made: 1) The inclusion constituent assumed insoluble in one another and 2) The constituents assumed totally miscible in one another. Thermodynamic considerations indicate that the metallic fission products found within inclusions of fuel rods irradiated in a fast neutron spectrum, would form homogeneous solutions. Therefore, it is concluded that the metallic fission products would not enhance fuel swelling during an overheating event. 16 refs

Who Benefits?: A Critical Race Analysis of the (D)Evolving Language of Inclusion in Higher Education

Science.gov (United States)

Harris, Jessica C.; Barone, Ryan P.; Davis, Lori Patton

2015-01-01

The primary purpose of this paper is to expand the ways in which educators and scholars employ the concepts of diversity, social justice, and inclusive excellence in relation to racial inclusivity. The goals are to help educators identify and acknowledge the intentional and unintentional consequences of maintaining white supremacy within higher…

Steam generator transient studies using a simplified two-fluid computer code

International Nuclear Information System (INIS)

Munshi, P.; Bhatnagar, R.; Ram, K.S.

1985-01-01

A simplified two-fluid computer code has been used to simulate reactor-side (or primary-side) transients in a PWR steam generator. The disturbances are modelled as ramp inputs for pressure, internal energy and mass flow-rate for the primary fluid. The CPU time for a transient duration of 4 s is approx. 10 min on a DEC-1090 computer system. The results are thermodynamically consistent and encouraging for further studies. (author)

Characterization and modelling of fluid flows in fissured and fractured media. relation with hydrothermal alterations and paleo-stress quantification; Caracterisation et modelisation des ecoulements fluides en milieu fissure. relation avec les alterations hydrothermales et quantification des paleocontraintes

Energy Technology Data Exchange (ETDEWEB)

Sausse, J.

1998-10-15

In all materials (rocks, concretes, ceramics,...), the presence of fractures at different scales implies high permeability and often oriented fluid flows. These fluid circulations in fractures induce more or less intense fluid-rock interactions with mineral crystallisation and/or dissolution. These phenomena directly depend on the nature of the fluids and the rocks, the physical and chemical properties of the media and the rate of fluid renewal (permeabilities). Usually, the development of such alterations leads to a massive sealing of the fractures (vein alterations) and of the fissures (fluid inclusion planes and microcracks, pervasive alteration). Therefore, their study brings us precious indications for the understanding of the mechanisms of fluid migrations in fossil systems. A geometrical study of the fracture systems at micro or macroscopic scales, based on the spatial distribution of sealing minerals, is applied to two different granites: the Soultz-sous-Foret granite (Bas-Rhin, France) and the Brezouard granite (Vosges, France). At the macroscopic scale, a new graphical method is proposed in order to study drilling data (Soultz granite). It allows to identify the presence of three independent mineral associations (quartz - illite, calcite-chlorite and hematite) in independent fracture systems characterised by a specific 3D geometry and hydraulic properties. These three types of vein alteration correspond to distinct and non contemporaneous fluid percolations. At the microscopic scale, the reconstitution of crack opening - fluid percolation - crack sealing stages is delicate. However, the study of their geometrical characteristics (orientations, radius, volume densities) and thereby the quantification of their porosities, exchange surfaces and permeabilities, allow to identify their respective roles in the fluid propagation. These microstructures, which are very numerous in granites, imply high but variable matrix permeabilities. This has been confirmed by

Understanding Fluid Flow during Tectonic Reactivation: An Example from the Flamborough Head Chalk Outcrop (UK

Directory of Open Access Journals (Sweden)

O. Faÿ-Gomord

2018-01-01

Full Text Available Flamborough Head chalks are located at the extremities of E-W and N-S trending fault systems along the Yorkshire coast (UK. Rock deformation is expressed in Selwicks Bay where a normal fault is exposed along with a high density of calcite veins. The fault mineralization is tested using geochemistry. Crosscutting relationships are used to differentiate between three vein generations: a network of parallel veins that are oriented perpendicular to stratigraphy (Group I, hydraulic breccia with typical jigsaw puzzle structure (Group II, and a third generation of calcite veins crosscutting the two previous generations (Group III. Geochemical analyses revealed that all three generations possess the same chemical signature and must reflect successive pulses from the same mineralizing fluid source. Strontium isotope analyses showed that the veins have elevated 87Sr/86Sr ratios, that is, up to 7.110, while ratios of the chalk matrix equal 7.707. The latter value is in agreement with the signature of Late Cretaceous seawater. Consequently, the source of the fluid is external, reflecting an open system. The radiogenic Sr-isotope ratios, combined with low iron concentration, suggest that fluids migrated through sandy deposits. Fluid inclusion salinities range from 0 to 12 eq. wt% NaCl equiv. with a dominance of very low salinity inclusions, reflecting a meteoric signal. This leads to a model where meteoric fluids stored in an underlying confined sandstone aquifer were remobilized. The wide range of salinities could result from mixing of the meteoric fluid with some more saline fluids present in the rock sequence or from the dissolution of salts in the subsurface. In addition to the understanding of the local paragenetic evolution of the veining in Flamborough Head chalks, this study offers an insight into the way how fluid flows and mineralizes along fault zones.

Singing and social inclusion.

Science.gov (United States)

Welch, Graham F; Himonides, Evangelos; Saunders, Jo; Papageorgi, Ioulia; Sarazin, Marc

2014-01-01

There is a growing body of neurological, cognitive, and social psychological research to suggest the possibility of positive transfer effects from structured musical engagement. In particular, there is evidence to suggest that engagement in musical activities may impact on social inclusion (sense of self and of being socially integrated). Tackling social exclusion and promoting social inclusion are common concerns internationally, such as in the UK and the EC, and there are many diverse Government ministries and agencies globally that see the arts in general and music in particular as a key means by which social needs can be addressed. As part of a wider evaluation of a national, Government-sponsored music education initiative for Primary-aged children in England ("Sing Up"), opportunity was taken by the authors, at the request of the funders, to assess any possible relationship between (a) children's developing singing behavior and development and (b) their social inclusion (sense of self and of being socially integrated). Subsequently, it was possible to match data from n = 6087 participants, drawn from the final 3 years of data collection (2008-2011), in terms of each child's individually assessed singing ability (based on their singing behavior of two well-known songs to create a "normalized singing score") and their written responses to a specially-designed questionnaire that included a set of statements related to children's sense of being socially included to which the children indicated their level of agreement on a seven-point Likert scale. Data analyses suggested that the higher the normalized singing development rating, the more positive the child's self-concept and sense of being socially included, irrespective of singer age, sex and ethnicity.

Principals' and Teachers' Attitudes and Knowledge of Inclusive Education as Predictors of Effective Teaching Practices in Ghana

Science.gov (United States)

Kuyini, Ahmed Bawa; Desai, Ishwar

2007-01-01

Surveys and observations were undertaken in selected primary schools in Ghana to determine whether principals' and teachers' attitudes towards and knowledge of inclusive education, as well as principals' expectations of teachers in implementing inclusion, were predictors of effective teaching practices in their classrooms. The sample of 128…

Liberal Versus Restrictive Fluid Management in Knee Arthroplasty: A Randomized, Double-Blind Study

DEFF Research Database (Denmark)

Holte, Kathrine; Kristensen, Billy Bjarne; Valentiner, Lotte

2007-01-01

BACKGROUND: There are few data describing the relationship between amount of perioperative fluid and organ function. In this study we investigated the effects of two levels of intravascular fluid administration ("liberal" versus "restrictive") in knee arthroplasty on physiological recovery...... with a standardized volume of colloid. All other aspects of perioperative management (including anesthesia, preoperative fluid status, and postoperative management) were standardized. Primary outcome variables included pulmonary function (spirometry), exercise capacity ("timed up and go" test), coagulation...... as the primary outcome variable. METHODS: In a double-blind study, 48 ASA I-III patients undergoing fast-track elective knee arthroplasty were randomized to restrictive or liberal perioperative intravascular fluid administration. Patients received a fixed rate infusion of Ringer's lactate solution...

Limits to Inclusion

Science.gov (United States)

Hansen, Janne Hedegaard

2012-01-01

In this article, I will argue that a theoretical identification of the limit to inclusion is needed in the conceptual identification of inclusion. On the one hand, inclusion is formulated as a vision that is, in principle, limitless. On the other hand, there seems to be an agreement that inclusion has a limit in the pedagogical practice. However,…

FLUID EVOLUTION AND MINERAL REACTIONS DURING SHEAR ZONE FORMATION AT NUSFJORD, LOFOTEN, NORWAY (Invited)

Science.gov (United States)

Kullerud, K.

2009-12-01

At Nusfjord in Lofoten, Norway, three 0.3 - 3 m thick shear zones occur in a gabbro-anorthosite. During deformation, the shear zones were infiltrated by a hydrous fluid enriched in Cl. In the central parts of the shear zones, fluid-rock interaction resulted in complete break-down of the primary mafic silicates. Complete hydration of these minerals to Cl-free amphibole and biotite suggests that the hydrous fluid was present in excess during deformation in these parts of the shear zones. Along the margins of the shear zones, however, the igneous mafic silicates (Cpx, Bt, Opx) were only partly overgrown by hydrous minerals. Here, Cl-enriched minerals (Amph, Bt, Scp, Ap) can be observed. Amphibole shows compositions covering the range 0.1 - 4.0 wt % Cl within single thin sections. Mineral textures and extreme compositional variations of the Cl-bearing minerals indicate large chemical gradients of the fluid phase. Relics of primary mafic silicates and compositionally zoned reaction coronas around primary mafic silicates suggest that the free fluid was totally consumed before the alteration of the primary phases were completed. The extreme variations in the Cl-content of amphibole are inferred to monitor a gradual desiccation of the Cl-bearing grain-boundary fluid during fluid-mineral reactions accordingly: 1) The first amphibole that formed during the reactions principally extracted water from the fluid, resulting in a slight increase in the Cl content of the fluid. 2) Continued amphibole-forming reactions resulted in gradual consumption of the free fluid phase, principally by extracting water from the fluid, resulting in an increase in its Cl-content. Higher Cl-content of the fluid resulted in higher Cl-content of the equilibrium amphibole. 3) The most Cl-enriched amphibole (4 wt % Cl) formed in equilibrium with the last volumes of the grain-boundary fluid, which had evolved to a highly saline solution. Mineral reactions within a 1-2 thick zone of the host rock along

Inclusive Business - What It Is All About? Managing Inclusive Companies

Directory of Open Access Journals (Sweden)

Tea Golja

2012-01-01

Full Text Available Following the challenges we face today, the inclusive business models are future business models through which the Millennium Development Goals can be fostered and strengthen. These are the models which, through their strategic orientation on inclusivity, include low income communities in their value chain. This can be done through combining variety of strategies which all have two common points – recognition of stakeholders and adjustment of the product to the target market. The paper presents the analysis of inclusive markets. Hence, the research results show the dispersion of inclusive businesses worldwide, type of the organization, sector coverage, and contribution to MDGs as well as the particular way of inclusion of low income communities in their value chain. The aim is to present how inclusive business benefits not only the low income societies, but the companies that operate in this way as well.

Origin of pegmatites and fluids at Ponta Negra (RJ, Brazil) during late- to post-collisional stages of the Gondwana Assembly

Science.gov (United States)

Bongiolo, Everton Marques; Renac, Christophe; Piza, Patricia d'Almeida de Toledo; Schmitt, Renata da Silva; Mexias, André Sampaio

2016-01-01

The Ponta Negra Pegmatites (PNP), part of a pegmatitic province in Rio de Janeiro State, Brazil, crop out along an intensely deformed, medium- to high-grade metamorphic area that is proximal to a crustal-scale thrust zone developed during the Brasiliano/Pan-African Orogeny. Fieldwork shows that the pegmatites formed in two distinct stages: (i) syn-collisional leucosome veins (Group I) conformable with the tectonic foliation of the gneissic host rocks and (ii) late- to post-collisional dykes (Group II) that cross-cut the same tectonic foliation at a high angle. In this paper, we use geochemistry of whole-rock and mineral separates (alkali-feldspar and biotite), fluid inclusion microthermometry and stable isotopic (δ18O, δD, δ13C) determinations on minerals (quartz, alkali-feldspar, biotite and magnetite) and fluid inclusions to provide insights into the composition of the pegmatite-forming melts, associated fluids, and their geotectonic significance. U-Pb SHRIMP dating of the Cajú syenogranite was performed to evaluate and compare the timing of magmatic events along the Cabo Frio Tectonic Domain as this is the closest post-collisional pluton to the studied pegmatites. The calculated temperature for the Group I syn-collisional veins (740 °C) is similar to previous estimates for the peak metamorphic conditions in the study area. Variations in the temperature of the Group II pegmatite dykes obtained from stable isotopes (380 to 720 °C), and microthermometric data from primary fluid inclusions with traces of N2 (Th = 280 to 360 °C), may reflect the thermodynamics of the pegmatite crystallization, exsolution textures and isotopic exchange. The composition of fluids in equilibrium within the pegmatite dykes consists of magmatic and metamorphic components. The minimum pressures calculated for the emplacement of the pegmatites are equivalent to a shallow crustal depth between 1.7 and 3.5 km, which corresponds to the exhumation of the orogen since the emplacement of

Fluid circulations in response to mantle exhumation at the passive margin setting in the north Pyrenean zone, France

Science.gov (United States)

Corre, B.; Boulvais, P.; Boiron, M. C.; Lagabrielle, Y.; Marasi, L.; Clerc, C.

2018-02-01

Sub-continental lithospheric mantle rocks are exhumed in the distal part of magma-poor passive margins. Remnants of the North Iberian paleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and offers a field analogue to study the processes of continental crust thinning, subcontinental mantle exhumation and associated fluid circulations. The Saraillé Massif which belongs to the `Chaînons Béarnais' range (Western Pyrenees), displays field, petrographic and stable isotopic evidence of syn-kinematic fluid circulations. Using electron probe micro-analyses on minerals, O, C, Sr isotopes compositions and micro thermometry/Raman spectrometry of fluid inclusions, we investigate the history of fluid circulations along and in the surroundings of the Saraillé detachment fault. The tectonic interface between the pre-rift Mesozoic sedimentary cover and the mantle rocks is marked by a metasomatic talc-chlorite layer. This layer formed through the infiltration of a fluid enriched in chemical elements like Cr leached from the exhuming serpentinized mantle rocks. In the overlying sediments (dolomitic and calcitic marbles of Jurassic to Aptian age), a network of calcitic veins, locally with quartz, formed as a consequence of the infiltration of aqueous saline fluids (salinities up to 34 wt% NaCl are recorded in quartz-hosted fluid inclusions) at moderate temperatures ( 220 °C). These brines likely derived from the dissolution of the local Triassic evaporites. In the upper part of the metasomatic system, upward movement of fluids is limited by the Albian metasediments, which likely acted as an impermeable layer. The model of fluid circulation in the Saraillé Massif sheds light onto other synchronous metasomatic systems in the Pyrenean realm.

Designing Inclusive Systems Designing Inclusion for Real-world Applications

CERN Document Server

Clarkson, John; Robinson, Peter; Lazar, Jonathan; Heylighen, Ann

2012-01-01

The Cambridge Workshops on Universal Access and Assistive Technology (CWUAAT) are a series of workshops held at a Cambridge University College every two years. The workshop theme: “Designing inclusion for real-world applications” refers to the emerging potential and relevance of the latest generations of inclusive design thinking, tools, techniques, and data, to mainstream project applications such as healthcare and the design of working environments. Inclusive Design Research involves developing tools and guidance enabling product designers to design for the widest possible population, for a given range of capabilities. There are five main themes: •Designing for the Real-World •Measuring Demand And Capabilities •Designing Cognitive Interaction with Emerging Technologies •Design for Inclusion •Designing Inclusive Architecture In the tradition of CWUAAT, we have solicited and accepted contributions over a wide range of topics, both within individual themes and also across the workshop’s scope. ...

Calculation of the force acting on a drop in a nonuniform flow of a current-supporting fluid