WorldWideScience

Sample records for previously published numerical

  1. Numerical simulation of the shot peening process under previous loading conditions

    International Nuclear Information System (INIS)

    Romero-Ángeles, B; Urriolagoitia-Sosa, G; Torres-San Miguel, C R; Molina-Ballinas, A; Benítez-García, H A; Vargas-Bustos, J A; Urriolagoitia-Calderón, G

    2015-01-01

    This research presents a numerical simulation of the shot peening process and determines the residual stress field induced into a component with a previous loading history. The importance of this analysis is based on the fact that mechanical elements under shot peening are also subjected to manufacturing processes, which convert raw material into finished product. However, material is not provided in a virgin state, it has a previous loading history caused by the manner it is fabricated. This condition could alter some beneficial aspects of the residual stress induced by shot peening and could accelerate the crack nucleation and propagation progression. Studies were performed in beams subjected to strain hardening in tension (5ε y ) before shot peening was applied. Latter results were then compared in a numerical assessment of an induced residual stress field by shot peening carried out in a component (beam) without any previous loading history. In this paper, it is clearly shown the detrimental or beneficial effect that previous loading history can bring to the mechanical component and how it can be controlled to improve the mechanical behavior of the material

  2. Compilation of new and previously published geochemical and modal data for Mesoproterozoic igneous rocks of the St. Francois Mountains, southeast Missouri

    Science.gov (United States)

    du Bray, Edward A.; Day, Warren C.; Meighan, Corey J.

    2018-04-16

    The purpose of this report is to present recently acquired as well as previously published geochemical and modal petrographic data for igneous rocks in the St. Francois Mountains, southeast Missouri, as part of an ongoing effort to understand the regional geology and ore deposits of the Mesoproterozoic basement rocks of southeast Missouri, USA. The report includes geochemical data that is (1) newly acquired by the U.S. Geological Survey and (2) compiled from numerous sources published during the last fifty-five years. These data are required for ongoing petrogenetic investigations of these rocks. Voluminous Mesoproterozoic igneous rocks in the St. Francois Mountains of southeast Missouri constitute the basement buried beneath Paleozoic sedimentary rock that is over 600 meters thick in places. The Mesoproterozoic rocks of southeast Missouri represent a significant component of approximately 1.4 billion-year-old (Ga) igneous rocks that crop out extensively in North America along the southeast margin of Laurentia and subsequent researchers suggested that iron oxide-copper deposits in the St. Francois Mountains are genetically associated with ca. 1.4 Ga magmatism in this region. The geochemical and modal data sets described herein were compiled to support investigations concerning the tectonic setting and petrologic processes responsible for the associated magmatism.

  3. Is email a reliable means of contacting authors of previously published papers? A study of the Emergency Medicine Journal for 2001.

    Science.gov (United States)

    O'Leary, F

    2003-07-01

    To determine whether it is possible to contact authors of previously published papers via email. A cross sectional study of the Emergency Medicine Journal for 2001. 118 articles were included in the study. The response rate from those with valid email addresses was 73%. There was no statistical difference between the type of email address used and the address being invalid (p=0.392) or between the type of article and the likelihood of a reply (p=0.197). More responses were obtained from work addresses when compared with Hotmail addresses (86% v 57%, p=0.02). Email is a valid means of contacting authors of previously published articles, particularly within the emergency medicine specialty. A work based email address may be a more valid means of contact than a Hotmail address.

  4. Navigating the heavy seas of online publishing

    DEFF Research Database (Denmark)

    Carpentier, Samuel; Dörry, Sabine; Lord, Sébastien

    2015-01-01

    Articulo – Journal of Urban Research celebrates its 10th anniversary! To celebrate this milestone, the current editors discuss the numerous changes and challenges related to publishing a peer-reviewed online journal. Since 2005, Articulo has progressively become more international, more professio......Articulo – Journal of Urban Research celebrates its 10th anniversary! To celebrate this milestone, the current editors discuss the numerous changes and challenges related to publishing a peer-reviewed online journal. Since 2005, Articulo has progressively become more international, more...... rough seas of online publishing in the future....

  5. Review of Methods and Approaches for Deriving Numeric ...

    Science.gov (United States)

    EPA will propose numeric criteria for nitrogen/phosphorus pollution to protect estuaries, coastal areas and South Florida inland flowing waters that have been designated Class I, II and III , as well as downstream protective values (DPVs) to protect estuarine and marine waters. In accordance with the formal determination and pursuant to a subsequent consent decree, these numeric criteria are being developed to translate and implement Florida’s existing narrative nutrient criterion, to protect the designated use that Florida has previously set for these waters, at Rule 62-302.530(47)(b), F.A.C. which provides that “In no case shall nutrient concentrations of a body of water be altered so as to cause an imbalance in natural populations of aquatic flora or fauna.” Under the Clean Water Act and EPA’s implementing regulations, these numeric criteria must be based on sound scientific rationale and reflect the best available scientific knowledge. EPA has previously published a series of peer reviewed technical guidance documents to develop numeric criteria to address nitrogen/phosphorus pollution in different water body types. EPA recognizes that available and reliable data sources for use in numeric criteria development vary across estuarine and coastal waters in Florida and flowing waters in South Florida. In addition, scientifically defensible approaches for numeric criteria development have different requirements that must be taken into consider

  6. Availability of nuclear decay data in electronic form, including beta spectra not previously published

    International Nuclear Information System (INIS)

    Eckerman, K.F.; Westfall, R.J.; Ryman, J.C.; Cristy, M.

    1994-01-01

    The unabridged data used in preparing ICRP Publication 38 (1983) and a monograph of the Medical Internal Radiation Dose (MIRD) Committee are now available in electronic form. The open-quotes ICRP38 collectionclose quotes contains data on the energies and intensities of radiations emitted by 825 radionuclides (those in ICRP Publication 38 plus 13 from the MIRD monograph), and the open-quotes MIRD collectionclose quotes contains data on 242 radionuclides. Each collection consists of a radiations data file and a beta spectra data file. The radiations data file contains the complete listing of the emitted radiations, their types, mean or unique energies, and absolute intensities for each radionuclide, the probability that a beta particle will be emitted with kinetic energies defined by a standard energy grid. Although summary information from the radiation data files has been published, neither the unabridged data nor the beta spectra have been published. These data files and a data extraction utility, which runs on a personal computer, are available from the Radiation Shielding Information Center at Oak Ridge National Laboratory. 13 refs., 1 fig., 6 tabs

  7. List of new names and new combinations previously effectively, but not validly, published.

    Science.gov (United States)

    2008-09-01

    The purpose of this announcement is to effect the valid publication of the following effectively published new names and new combinations under the procedure described in the Bacteriological Code (1990 Revision). Authors and other individuals wishing to have new names and/or combinations included in future lists should send three copies of the pertinent reprint or photocopies thereof, or an electronic copy of the published paper, to the IJSEM Editorial Office for confirmation that all of the other requirements for valid publication have been met. It is also a requirement of IJSEM and the ICSP that authors of new species, new subspecies and new combinations provide evidence that types are deposited in two recognized culture collections in two different countries (i.e. documents certifying deposition and availability of type strains). It should be noted that the date of valid publication of these new names and combinations is the date of publication of this list, not the date of the original publication of the names and combinations. The authors of the new names and combinations are as given below, and these authors' names will be included in the author index of the present issue and in the volume author index. Inclusion of a name on these lists validates the publication of the name and thereby makes it available in bacteriological nomenclature. The inclusion of a name on this list is not to be construed as taxonomic acceptance of the taxon to which the name is applied. Indeed, some of these names may, in time, be shown to be synonyms, or the organisms may be transferred to another genus, thus necessitating the creation of a new combination.

  8. Transition to electronic publishing

    Science.gov (United States)

    Bowning, Sam

    Previous communications have described some of the many changes that will occur in the next few months as AGU makes the transition to fully electronic publishing. With the advent of the new AGU electronic publishing system, manuscripts will be submitted, edited, reviewed, and published in electronic formats. This piece discusses how the electronic journals will differ from the print journals. Electronic publishing will require some adjustments to the ways we currently think about journals from our perspective of standard print versions. Visiting the Web site of AGU's Geochemistry, Geophysics, Geosystems (G-Cubed) is a great way to get familiar with the look and feel of electronic publishing. However, protocols, especially for citations of articles, are still evolving. Some of the biggest changes for users of AGU publications may be the lack of page numbers, the use of a unique identifier (DOI),and changes in citation style.

  9. Open Access, data capitalism and academic publishing.

    Science.gov (United States)

    Hagner, Michael

    2018-02-16

    Open Access (OA) is widely considered a breakthrough in the history of academic publishing, rendering the knowledge produced by the worldwide scientific community accessible to all. In numerous countries, national governments, funding institutions and research organisations have undertaken enormous efforts to establish OA as the new publishing standard. The benefits and new perspectives, however, cause various challenges. This essay addresses several issues, including that OA is deeply embedded in the logic and practices of data capitalism. Given that OA has proven an attractive business model for commercial publishers, the key predictions of OA-advocates, namely that OA would liberate both scientists and tax payers from the chains of global publishing companies, have not become true. In its conclusion, the paper discusses the opportunities and pitfalls of non-commercial publishing.

  10. Numerical simulation of avascular tumor growth

    Energy Technology Data Exchange (ETDEWEB)

    Slezak, D Fernandez; Suarez, C; Soba, A; Risk, M; Marshall, G [Laboratorio de Sistemas Complejos, Departamento de Computacion, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires (C1428EGA) Buenos Aires (Argentina)

    2007-11-15

    A mathematical and numerical model for the description of different aspects of microtumor development is presented. The model is based in the solution of a system of partial differential equations describing an avascular tumor growth. A detailed second-order numeric algorithm for solving this system is described. Parameters are swiped to cover a range of feasible physiological values. While previous published works used a single set of parameters values, here we present a wide range of feasible solutions for tumor growth, covering a more realistic scenario. The model is validated by experimental data obtained with a multicellular spheroid model, a specific type of in vitro biological model which is at present considered to be optimum for the study of complex aspects of avascular microtumor physiology. Moreover, a dynamical analysis and local behaviour of the system is presented, showing chaotic situations for particular sets of parameter values at some fixed points. Further biological experiments related to those specific points may give potentially interesting results.

  11. Using the genome aggregation database, computational pathogenicity prediction tools, and patch clamp heterologous expression studies to demote previously published long QT syndrome type 1 mutations from pathogenic to benign.

    Science.gov (United States)

    Clemens, Daniel J; Lentino, Anne R; Kapplinger, Jamie D; Ye, Dan; Zhou, Wei; Tester, David J; Ackerman, Michael J

    2018-04-01

    Mutations in the KCNQ1-encoded Kv7.1 potassium channel cause long QT syndrome (LQTS) type 1 (LQT1). It has been suggested that ∼10%-20% of rare LQTS case-derived variants in the literature may have been published erroneously as LQT1-causative mutations and may be "false positives." The purpose of this study was to determine which previously published KCNQ1 case variants are likely false positives. A list of all published, case-derived KCNQ1 missense variants (MVs) was compiled. The occurrence of each MV within the Genome Aggregation Database (gnomAD) was assessed. Eight in silico tools were used to predict each variant's pathogenicity. Case-derived variants that were either (1) too frequently found in gnomAD or (2) absent in gnomAD but predicted to be pathogenic by ≤2 tools were considered potential false positives. Three of these variants were characterized functionally using whole-cell patch clamp technique. Overall, there were 244 KCNQ1 case-derived MVs. Of these, 29 (12%) were seen in ≥10 individuals in gnomAD and are demotable. However, 157 of 244 MVs (64%) were absent in gnomAD. Of these, 7 (4%) were predicted to be pathogenic by ≤2 tools, 3 of which we characterized functionally. There was no significant difference in current density between heterozygous KCNQ1-F127L, -P477L, or -L619M variant-containing channels compared to KCNQ1-WT. This study offers preliminary evidence for the demotion of 32 (13%) previously published LQT1 MVs. Of these, 29 were demoted because of their frequent sighting in gnomAD. Additionally, in silico analysis and in vitro functional studies have facilitated the demotion of 3 ultra-rare MVs (F127L, P477L, L619M). Copyright © 2017 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

  12. Topics in numerical relativity : the periodic standing-wave approximation, the stability of constraints in free evolution, and the spin of dynamical black holes

    Science.gov (United States)

    Owen, Robert

    This thesis concerns numerical relativity, the attempt to study Einstein's theory of gravitation using numerical discretization. The goal of the field, the study of gravitational dynamics in cases where symmetry reduction or perturbation theory are not possible, finally seems to be coming to fruition, at least for the archetypal problem of the inspiral and coalescence of binary black hole systems. This thesis presents three episodes that each bear some relationship to this story.Chapters 2 and 3 present previously published work in collaboration with Richard Price and others on the so-called periodic standing-wave (PSW) approximation for binary inspiral. The approximation is to balance outgoing radiation with incoming radiation, stabilizing the orbit and making the problem stationary in a rotating frame. Chapters 2 and 3 apply the method to the problem of co-orbiting charges coupled to a nonlinear scalar field in three dimensions.Chapters 4, 5, and 6 concern the stability of constraint fields in conventional numerical relativity simulations. Chapter 4 (also previously published work, in collaboration with the Caltech numerical relativity group, along with Michael Holst and Lawrence Kidder) presents a method for immediately correcting violations of constraints after they have arisen. Chapters 5 and 6 present methods to ``damp' away constraint violations dynamically in two specific contexts. Chapter 5 (previously published work in collaboration with the Caltech numerical relativity group and Lawrence Kidder) presents a first-order linearly degenerate symmetric hyperbolic representation of Einstein's equations in generalized harmonic gauge. A representation is presented that stabilizes all constraints, including those that appear when the system is written in first-order form. Chapter 6 presents a generalization of the Kidder-Scheel-Teukolsky evolution systems that provides much-improved stability. This is investigated with numerical simulations of a single black hole

  13. Support Science by Publishing in Scientific Society Journals.

    Science.gov (United States)

    Schloss, Patrick D; Johnston, Mark; Casadevall, Arturo

    2017-09-26

    Scientific societies provide numerous services to the scientific enterprise, including convening meetings, publishing journals, developing scientific programs, advocating for science, promoting education, providing cohesion and direction for the discipline, and more. For most scientific societies, publishing provides revenues that support these important activities. In recent decades, the proportion of papers on microbiology published in scientific society journals has declined. This is largely due to two competing pressures: authors' drive to publish in "glam journals"-those with high journal impact factors-and the availability of "mega journals," which offer speedy publication of articles regardless of their potential impact. The decline in submissions to scientific society journals and the lack of enthusiasm on the part of many scientists to publish in them should be matters of serious concern to all scientists because they impact the service that scientific societies can provide to their members and to science. Copyright © 2017 Schloss et al.

  14. "My math and me": Nursing students' previous experiences in learning mathematics.

    Science.gov (United States)

    Røykenes, Kari

    2016-01-01

    In this paper, 11 narratives about former experiences in learning of mathematics written by nursing students are thematically analyzed. Most students had a positive relationship with the subject in primary school, when they found mathematics fun and were able to master the subject. For some, a change occurred in the transition to lower secondary school. The reasons for this change was found in the subject (increased difficulty), the teachers (movement of teachers, numerous substitute teachers), the class environment and size (many pupils, noise), and the student him- or herself (silent and anonymous pupil). This change was also found in the transition from lower to higher secondary school. By contrast, some students had experienced changes that were positive, and their mathematics teacher was a significant factor in this positive change. The paper emphasizes the importance of previous experiences in learning mathematics to nursing students when learning about drug calculation. Copyright © 2015. Published by Elsevier Ltd.

  15. Numerical analysis for prediction of fatigue crack opening level

    International Nuclear Information System (INIS)

    Choi, Hyeon Chang

    2004-01-01

    Finite Element Analysis (FEA) is the most popular numerical method to simulate plasticity-induced fatigue crack closure and can predict fatigue crack closure behavior. Finite element analysis under plane stress state using 4-node isoparametric elements is performed to investigate the detailed closure behavior of fatigue cracks and the numerical results are compared with experimental results. The mesh of constant size elements on the crack surface can not correctly predict the opening level for fatigue crack as shown in the previous works. The crack opening behavior for the size mesh with a linear change shows almost flat stress level after a crack tip has passed by the monotonic plastic zone. The prediction of crack opening level presents a good agreement with published experimental data regardless of stress ratios, which are using the mesh of the elements that are in proportion to the reversed plastic zone size considering the opening stress intensity factors. Numerical interpolation results of finite element analysis can precisely predict the crack opening level. This method shows a good agreement with the experimental data regardless of the stress ratios and kinds of materials

  16. [A brief history of resuscitation - the influence of previous experience on modern techniques and methods].

    Science.gov (United States)

    Kucmin, Tomasz; Płowaś-Goral, Małgorzata; Nogalski, Adam

    2015-02-01

    Cardiopulmonary resuscitation (CPR) is relatively novel branch of medical science, however first descriptions of mouth-to-mouth ventilation are to be found in the Bible and literature is full of descriptions of different resuscitation methods - from flagellation and ventilation with bellows through hanging the victims upside down and compressing the chest in order to stimulate ventilation to rectal fumigation with tobacco smoke. The modern history of CPR starts with Kouwenhoven et al. who in 1960 published a paper regarding heart massage through chest compressions. Shortly after that in 1961Peter Safar presented a paradigm promoting opening the airway, performing rescue breaths and chest compressions. First CPR guidelines were published in 1966. Since that time guidelines were modified and improved numerously by two leading world expert organizations ERC (European Resuscitation Council) and AHA (American Heart Association) and published in a new version every 5 years. Currently 2010 guidelines should be obliged. In this paper authors made an attempt to present history of development of resuscitation techniques and methods and assess the influence of previous lifesaving methods on nowadays technologies, equipment and guidelines which allow to help those women and men whose life is in danger due to sudden cardiac arrest. © 2015 MEDPRESS.

  17. On the elimination of numerical Cerenkov radiation in PIC simulations

    International Nuclear Information System (INIS)

    Greenwood, Andrew D.; Cartwright, Keith L.; Luginsland, John W.; Baca, Ernest A.

    2004-01-01

    Particle-in-cell (PIC) simulations are a useful tool in modeling plasma in physical devices. The Yee finite difference time domain (FDTD) method is commonly used in PIC simulations to model the electromagnetic fields. However, in the Yee FDTD method, poorly resolved waves at frequencies near the cut off frequency of the grid travel slower than the physical speed of light. These slowly traveling, poorly resolved waves are not a problem in many simulations because the physics of interest are at much lower frequencies. However, when high energy particles are present, the particles may travel faster than the numerical speed of their own radiation, leading to non-physical, numerical Cerenkov radiation. Due to non-linear interaction between the particles and the fields, the numerical Cerenkov radiation couples into the frequency band of physical interest and corrupts the PIC simulation. There are two methods of mitigating the effects of the numerical Cerenkov radiation. The computational stencil used to approximate the curl operator can be altered to improve the high frequency physics, or a filtering scheme can be introduced to attenuate the waves that cause the numerical Cerenkov radiation. Altering the computational stencil is more physically accurate but is difficult to implement while maintaining charge conservation in the code. Thus, filtering is more commonly used. Two previously published filters by Godfrey and Friedman are analyzed and compared to ideally desired filter properties

  18. Finger-Based Numerical Skills Link Fine Motor Skills to Numerical Development in Preschoolers.

    Science.gov (United States)

    Suggate, Sebastian; Stoeger, Heidrun; Fischer, Ursula

    2017-12-01

    Previous studies investigating the association between fine-motor skills (FMS) and mathematical skills have lacked specificity. In this study, we test whether an FMS link to numerical skills is due to the involvement of finger representations in early mathematics. We gave 81 pre-schoolers (mean age of 4 years, 9 months) a set of FMS measures and numerical tasks with and without a specific finger focus. Additionally, we used receptive vocabulary and chronological age as control measures. FMS linked more closely to finger-based than to nonfinger-based numerical skills even after accounting for the control variables. Moreover, the relationship between FMS and numerical skill was entirely mediated by finger-based numerical skills. We concluded that FMS are closely related to early numerical skill development through finger-based numerical counting that aids the acquisition of mathematical mental representations.

  19. Numerical ductile tearing simulation of circumferential cracked pipe tests under dynamic loading conditions

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Hyun Suk; Kim, Ji Soo; Ryu, Ho Wan; Kim, Yun Jae [Dept. of Mechanical Engineering, Korea University, Seoul (Korea, Republic of); Kim, Jin Weon [Dept. of Nuclear Engineering, Chosun University, Gwangju (Korea, Republic of)

    2016-10-15

    This paper presents a numerical method to simulate ductile tearing in cracked components under high strain rates using finite element damage analysis. The strain rate dependence on tensile properties and multiaxial fracture strain is characterized by the model developed by Johnson and Cook. The damage model is then defined based on the ductility exhaustion concept using the strain rate dependent multiaxial fracture strain concept. The proposed model is applied to simulate previously published three cracked pipe bending test results under two different test speed conditions. Simulated results show overall good agreement with experimental results.

  20. Numerical simulation of an elementary Vortex-Induced-Vibration problem by using fully-coupled fluid solid system computation

    Directory of Open Access Journals (Sweden)

    M Pomarède

    2016-09-01

    Full Text Available Numerical simulation of Vortex-Induced-Vibrations (VIV of a rigid circular elastically-mounted cylinder submitted to a fluid cross-flow has been extensively studied over the past decades, both experimentally and numerically, because of its theoretical and practical interest for understanding Flow-Induced-Vibrations (FIV problems. In this context, the present article aims to expose a numerical study based on fully-coupled fluid-solid computations compared to previously published work [34], [36]. The computational procedure relies on a partitioned method ensuring the coupling between fluid and structure solvers. The fluid solver involves a moving mesh formulation for simulation of the fluid structure interface motion. Energy exchanges between fluid and solid models are ensured through convenient numerical schemes. The present study is devoted to a low Reynolds number configuration. Cylinder motion magnitude, hydrodynamic forces, oscillation frequency and fluid vortex shedding modes are investigated and the “lock-in” phenomenon is reproduced numerically. These numerical results are proposed for code validation purposes before investigating larger industrial applications such as configurations involving tube arrays under cross-flows [4].

  1. Publishing with XML structure, enter, publish

    CERN Document Server

    Prost, Bernard

    2015-01-01

    XML is now at the heart of book publishing techniques: it provides the industry with a robust, flexible format which is relatively easy to manipulate. Above all, it preserves the future: the XML text becomes a genuine tactical asset enabling publishers to respond quickly to market demands. When new publishing media appear, it will be possible to very quickly make your editorial content available at a lower cost. On the downside, XML can become a bottomless pit for publishers attracted by its possibilities. There is a strong temptation to switch to audiovisual production and to add video and a

  2. Predatory Publishing Is a Threat to Non-Mainstream Science

    Science.gov (United States)

    Nurmashev, Bekaidar

    2017-01-01

    This article highlights the issue of wasteful publishing practices that primarily affect non-mainstream science countries and rapidly growing academic disciplines. Numerous start-up open access publishers with soft or nonexistent quality checks and huge commercial interests have created a global crisis in the publishing market. Their publishing practices have been thoroughly examined, leading to the blacklisting of many journals by Jeffrey Beall. However, it appears that some subscription journals are also falling short of adhering to the international recommendations of global editorial associations. Unethical editing agencies that promote their services in non-mainstream science countries create more problems for inexperienced authors. It is suggested to regularly monitor the quality of already indexed journals and upgrade criteria of covering new sources by the Emerging Sources Citation Index (Web of Science), Scopus, and specialist bibliographic databases. Regional awareness campaigns to inform stakeholders of science communication about the importance of ethical writing, transparency of editing services, and permanent archiving can be also helpful for eradicating unethical publishing practices. PMID:28378542

  3. Numerical Simulation of Liquids Draining From a Tank Using OpenFOAM

    Science.gov (United States)

    Sakri, Fadhilah Mohd; Sukri Mat Ali, Mohamed; Zaki Shaikh Salim, Sheikh Ahmad; Muhamad, Sallehuddin

    2017-08-01

    Accurate simulation of liquids draining is a challenging task. It involves two phases flow, i.e. liquid and air. In this study draining a liquid from a cylindrical tank is numerically simulated using OpenFOAM. OpenFOAM is an open source CFD package and it becomes increasingly popular among the academician and also industries. Comparisons with theoretical and results from previous published data confirmed that OpenFOAM is able to simulate the liquids draining very well. This is done using the gas-liquid interface solver available in the standard library of OpenFOAM. Additionally, this study was also able to explain the physics flow of the draining tank.

  4. Thomas Jefferson, Page Design, and Desktop Publishing.

    Science.gov (United States)

    Hartley, James

    1991-01-01

    Discussion of page design for desktop publishing focuses on the importance of functional issues as opposed to aesthetic issues, and criticizes a previous article that stressed aesthetic issues. Topics discussed include balance, consistency in text structure, and how differences in layout affect the clarity of "The Declaration of…

  5. Numerical fatigue analysis of premolars restored by CAD/CAM ceramic crowns.

    Science.gov (United States)

    Homaei, Ehsan; Jin, Xiao-Zhuang; Pow, Edmond Ho Nang; Matinlinna, Jukka Pekka; Tsoi, James Kit-Hon; Farhangdoost, Khalil

    2018-04-10

    The purpose of this study was to estimate the fatigue life of premolars restored with two dental ceramics, lithium disilicate (LD) and polymer infiltrated ceramic (PIC) using the numerical method and compare it with the published in vitro data. A premolar restored with full-coverage crown was digitized. The volumetric shape of tooth tissues and crowns were created in Mimics ® . They were transferred to IA-FEMesh for mesh generation and the model was analyzed with Abaqus. By combining the stress distribution results with fatigue stress-life (S-N) approach, the lifetime of restored premolars was predicted. The predicted lifetime was 1,231,318 cycles for LD with fatigue load of 1400N, while the one for PIC was 475,063 cycles with the load of 870N. The peak value of maximum principal stress occurred at the contact area (LD: 172MPa and PIC: 96MPa) and central fossa (LD: 100MPa and PIC: 64MPa) for both ceramics which were the most seen failure areas in the experiment. In the adhesive layer, the maximum shear stress was observed at the shoulder area (LD: 53.6MPa and PIC: 29MPa). The fatigue life and failure modes of all-ceramic crown determined by the numerical method seem to correlate well with the previous experimental study. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

  6. What comes first? Publishing business or publishing studies?

    Directory of Open Access Journals (Sweden)

    Josipa Selthofer

    2015-07-01

    Full Text Available The aim of this paper is to analyze and compare publishing studies, their programmes at the undergraduate and graduate levels and scholars involved in the teaching of publishing courses at the top universities around the world and in Croatia. Since traditional publishing business is rapidly changing, new skills and new jobs are involved in it. The main research question is: Can modern publishing studies produce a modern publisher? Or, is it the other way around? The hypothesis of the paper is that scholars involved in the teaching of publishing courses at the top universities around the world have a background in publishing business. So, can they prepare their students for the future and can their students gain competencies they need to compete in a confusing world of digital authors and electronic books? The research methods used were content analysis and comparison. Research sample included 36 university publishing programmes at the undergraduate and graduate level worldwide (24 MA, 12 BA. The research sample was limited mainly to the English-speaking countries. In most non-English-speaking countries, it was difficult to analyse the programme curriculum in the native language because the programme and course description did not exit. In the data gathering phase, a customized web application was used for content analysis. The application has three main sections: a list of websites to evaluate, a visual representation of the uploaded website and a list of characteristics grouped by categories for quantifying data. About twenty years ago, publishing was not considered a separate scientific branch in Croatia. Publishing studies are therefore a new phenomenon to both scholars and publishers in Croatia. To create a new, ideal publishing course, can we simply copy global trends or is it better to create something of our own?

  7. Urging medical students to publish: Advantages, disadvantages and new challenges.

    Science.gov (United States)

    Rached, Gaëlle; Hobeika, Charbel; Karam, Elias; Kourié, Hampig Raphael; Kattan, Joseph

    2018-06-01

    As soon as they get accepted into medical school, students find themselves facing numerous expectations: coping with tremendous study burden, competing with others for the best rank, completing internships and participating in the race for publishing are only to name a few. This big juggle makes it hard for the medical student to focus on research. It is often easier to postpone publication and involvement in research to "later". In fact there are many advantages to publishing in the current publication system but there are many disadvantages as well. With the widespread of social media and open access systems, new challenges have arisen. The aim of this paper is to discuss the advantages and disadvantages of publishing in the current system while highlighting the new challenges that the students might need to overcome. Its aim is to provide medical students with information to enhance their understanding of the current publication system and thus most importantly, probe their desire to publish. Copyright © 2018 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

  8. Mixed media : feminist presses and publishing politics in twentieth-century Britain

    OpenAIRE

    Murray, S. E.

    1999-01-01

    The high cultural profile of contemporary feminist publishing in Britain has previously met with a curiously evasive response from those spheres of academic discourse in which it might be expected to figure: women's studies, while asserting the innate politicality of all communication, has tended to overlook the subject of publishing in favour of less materialist cultural modes; while publishing studies has conventionally overlooked the significance of gender as a differential ...

  9. Transportation package design using numerical optimization

    International Nuclear Information System (INIS)

    Harding, D.C.; Witkowski, W.R.

    1991-01-01

    The purpose of this overview is twofold: first, to outline the theory and basic elements of numerical optimization; and second, to show how numerical optimization can be applied to the transportation packaging industry and used to increase efficiency and safety of radioactive and hazardous material transportation packages. A more extensive review of numerical optimization and its applications to radioactive material transportation package design was performed previously by the authors (Witkowski and Harding 1992). A proof-of-concept Type B package design is also presented as a simplified example of potential improvements achievable using numerical optimization in the design process

  10. Zdeněk Kopal: Numerical Analyst

    Science.gov (United States)

    Křížek, M.

    2015-07-01

    We give a brief overview of Zdeněk Kopal's life, his activities in the Czech Astronomical Society, his collaboration with Vladimír Vand, and his studies at Charles University, Cambridge, Harvard, and MIT. Then we survey Kopal's professional life. He published 26 monographs and 20 conference proceedings. We will concentrate on Kopal's extensive monograph Numerical Analysis (1955, 1961) that is widely accepted to be the first comprehensive textbook on numerical methods. It describes, for instance, methods for polynomial interpolation, numerical differentiation and integration, numerical solution of ordinary differential equations with initial or boundary conditions, and numerical solution of integral and integro-differential equations. Special emphasis will be laid on error analysis. Kopal himself applied numerical methods to celestial mechanics, in particular to the N-body problem. He also used Fourier analysis to investigate light curves of close binaries to discover their properties. This is, in fact, a problem from mathematical analysis.

  11. Direct numerical simulation of turbulent pipe flow using the lattice Boltzmann method

    Science.gov (United States)

    Peng, Cheng; Geneva, Nicholas; Guo, Zhaoli; Wang, Lian-Ping

    2018-03-01

    In this paper, we present a first direct numerical simulation (DNS) of a turbulent pipe flow using the mesoscopic lattice Boltzmann method (LBM) on both a D3Q19 lattice grid and a D3Q27 lattice grid. DNS of turbulent pipe flows using LBM has never been reported previously, perhaps due to inaccuracy and numerical stability associated with the previous implementations of LBM in the presence of a curved solid surface. In fact, it was even speculated that the D3Q19 lattice might be inappropriate as a DNS tool for turbulent pipe flows. In this paper, we show, through careful implementation, accurate turbulent statistics can be obtained using both D3Q19 and D3Q27 lattice grids. In the simulation with D3Q19 lattice, a few problems related to the numerical stability of the simulation are exposed. Discussions and solutions for those problems are provided. The simulation with D3Q27 lattice, on the other hand, is found to be more stable than its D3Q19 counterpart. The resulting turbulent flow statistics at a friction Reynolds number of Reτ = 180 are compared systematically with both published experimental and other DNS results based on solving the Navier-Stokes equations. The comparisons cover the mean-flow profile, the r.m.s. velocity and vorticity profiles, the mean and r.m.s. pressure profiles, the velocity skewness and flatness, and spatial correlations and energy spectra of velocity and vorticity. Overall, we conclude that both D3Q19 and D3Q27 simulations yield accurate turbulent flow statistics. The use of the D3Q27 lattice is shown to suppress the weak secondary flow pattern in the mean flow due to numerical artifacts.

  12. Desktop Publishing.

    Science.gov (United States)

    Stanley, Milt

    1986-01-01

    Defines desktop publishing, describes microcomputer developments and software tools that make it possible, and discusses its use as an instructional tool to improve writing skills. Reasons why students' work should be published, examples of what to publish, and types of software and hardware to facilitate publishing are reviewed. (MBR)

  13. Structural Revision of Some Recently Published Iridoid Glucosides

    DEFF Research Database (Denmark)

    Jensen, Søren Rosendal; Calis, Ihsan; Gotfredsen, Charlotte Held

    2007-01-01

    ). Finally, two alleged iridoid galactosides from Buddleja crispa named buddlejosides A and B (12a and 12b) have been shown to be the corresponding glucosides; the former is identical to agnuside (13a) while the latter is 3,4-dihydroxybenzoylaucubin (13b), an iridoid glucoside not previously published...

  14. Cardiovascular magnetic resonance in adults with previous cardiovascular surgery.

    Science.gov (United States)

    von Knobelsdorff-Brenkenhoff, Florian; Trauzeddel, Ralf Felix; Schulz-Menger, Jeanette

    2014-03-01

    Cardiovascular magnetic resonance (CMR) is a versatile non-invasive imaging modality that serves a broad spectrum of indications in clinical cardiology and has proven evidence. Most of the numerous applications are appropriate in patients with previous cardiovascular surgery in the same manner as in non-surgical subjects. However, some specifics have to be considered. This review article is intended to provide information about the application of CMR in adults with previous cardiovascular surgery. In particular, the two main scenarios, i.e. following coronary artery bypass surgery and following heart valve surgery, are highlighted. Furthermore, several pictorial descriptions of other potential indications for CMR after cardiovascular surgery are given.

  15. Music publishing

    OpenAIRE

    Simões, Alberto; Almeida, J. J.

    2003-01-01

    Current music publishing in the Internet is mainly concerned with sound publishing. We claim that music publishing is not only to make sound available but also to define relations between a set of music objects like music scores, guitar chords, lyrics and their meta-data. We want an easy way to publish music in the Internet, to make high quality paper booklets and even to create Audio CD's. In this document we present a workbench for music publishing based on open formats, using open-source t...

  16. Numerical simulation of laser resonators

    International Nuclear Information System (INIS)

    Yoo, J. G.; Jeong, Y. U.; Lee, B. C.; Rhee, Y. J.; Cho, S. O.

    2004-01-01

    We developed numerical simulation packages for laser resonators on the bases of a pair of integral equations. Two numerical schemes, a matrix formalism and an iterative method, were programmed for finding numeric solutions to the pair of integral equations. The iterative method was tried by Fox and Li, but it was not applicable for high Fresnel numbers since the numerical errors involved propagate and accumulate uncontrollably. In this paper, we implement the matrix method to extend the computational limit further. A great number of case studies are carried out with various configurations of stable and unstable r;esonators to compute diffraction losses, phase shifts, intensity distributions and phases of the radiation fields on mirrors. Our results presented in this paper show not only a good agreement with the results previously obtained by Fox and Li, but also the legitimacy of our numerical procedures for high Fresnel numbers.

  17. Pioneers, publishers and the dissemination of archaeological knowledge: A study of publishing in British archaeology 1816-1851

    Directory of Open Access Journals (Sweden)

    Sarah Scott

    2013-08-01

    Full Text Available The first half of the nineteenth century was a formative period in the development of archaeology as a discipline and archaeological publishing played a key role in this. Libraries were an essential marker of social and intellectual status and there now exists a considerable body of scholarship on the most impressive publications of the day and on the factors influencing their presentation; for example, in relation to the publication of Mediterranean classical antiquities. The crucial role which publishers played in the selection and dissemination of scholarship has been addressed in recent studies of the history of the book, and there is a growing literature on the role of publishers in the dissemination of scientific knowledge, but there has to date been very limited evaluation of the role of publishers in the selection and dissemination of archaeological knowledge in Britain in this period. This study will investigate the extent to which the publication and dissemination of archaeological knowledge, and hence the discipline itself, was shaped by the intellectual and/or commercial concerns of publishers, with a view to providing a more nuanced understanding of the ways in which knowledge was filtered and the impact that this had. Key trends in archaeological publishing in the period 1816-51 will be identified, based on the London Catalogue of Books, and will show how and why this kind of study should be seen as an essential component of any research which considers the history of the discipline. Selected case studies will show the immense, and previously unacknowledged, importance of decisions made during the publication process on the development of archaeology in Britain, and directions for further study will be identified.

  18. Numerical analysis using Sage

    CERN Document Server

    Anastassiou, George A

    2015-01-01

    This is the first numerical analysis text to use Sage for the implementation of algorithms and can be used in a one-semester course for undergraduates in mathematics, math education, computer science/information technology, engineering, and physical sciences. The primary aim of this text is to simplify understanding of the theories and ideas from a numerical analysis/numerical methods course via a modern programming language like Sage. Aside from the presentation of fundamental theoretical notions of numerical analysis throughout the text, each chapter concludes with several exercises that are oriented to real-world application.  Answers may be verified using Sage.  The presented code, written in core components of Sage, are backward compatible, i.e., easily applicable to other software systems such as Mathematica®.  Sage is  open source software and uses Python-like syntax. Previous Python programming experience is not a requirement for the reader, though familiarity with any programming language is a p...

  19. On the Various Aspects of Publishing Journal Articles and Academic Books

    Science.gov (United States)

    Thompson, Bruce

    2016-01-01

    A list of important precepts to guide academic publishing is presented based on the author's experience as the author of numerous journal articles, the editor of 4 journals, and the author or editor of 11 books. These precepts cover the full array of the publication, from first conceptualizing a research project through promoting one's own work.…

  20. Numerical investigation of thermally stratified Williamson fluid flow over a cylindrical surface via Keller box method

    Science.gov (United States)

    Bilal, S.; Rehman, Khalil Ur; Malik, M. Y.

    Present study is addressed to express the implementation of Keller-Box technique on physical problem in the field of fluid rheology, for this purpose the Williamson fluid flow is considered along a cylindrical stretching surface manifested with temperature stratification. The flow model is translated mathematically in terms of differential equations. Numerical simulation is executed to trace out the solution structure of developed differential system. The graphical outcomes for the flow regime of two different geometries (i-e cylindrical and plane surface) are reported and examined towards involved physical parameters. Furthermore, the local skin friction coefficient and local Nusselt number are computed numerically. A remarkable agreement of present study is noticed with the previously published results, which confirms the implementation and validation of Keller-Box scheme and it will serve as a helping source for the future correspondence.

  1. An Electronic Publishing Model for Academic Publishers.

    Science.gov (United States)

    Gold, Jon D.

    1994-01-01

    Describes an electronic publishing model based on Standard Generalized Markup Language (SGML) and considers its use by an academic publisher. Highlights include how SGML is used to produce an electronic book, hypertext, methods of delivery, intellectual property rights, and future possibilities. Sample documents are included. (two references) (LRW)

  2. Reasoning with Previous Decisions: Beyond the Doctrine of Precedent

    DEFF Research Database (Denmark)

    Komárek, Jan

    2013-01-01

    in different jurisdictions use previous judicial decisions in their argument, we need to move beyond the concept of precedent to a wider notion, which would embrace practices and theories in legal systems outside the Common law tradition. This article presents the concept of ‘reasoning with previous decisions...... law method’, but they are no less rational and intellectually sophisticated. The reason for the rather conceited attitude of some comparatists is in the dominance of the common law paradigm of precedent and the accompanying ‘case law method’. If we want to understand how courts and lawyers......’ as such an alternative and develops its basic models. The article first points out several shortcomings inherent in limiting the inquiry into reasoning with previous decisions by the common law paradigm (1). On the basis of numerous examples provided in section (1), I will present two basic models of reasoning...

  3. BCJ numerators from reduced Pfaffian

    Energy Technology Data Exchange (ETDEWEB)

    Du, Yi-Jian [Center for Theoretical Physics, School of Physics and Technology, Wuhan University,No. 299 Bayi Road, Wuhan 430072 (China); Teng, Fei [Department of Physics and Astronomy, University of Utah,115 South 1400 East, Salt Lake City, UT 84112 (United States)

    2017-04-07

    By expanding the reduced Pfaffian in the tree level Cachazo-He-Yuan (CHY) integrands for Yang-Mills (YM) and nonlinear sigma model (NLSM), we can get the Bern-Carrasco-Johansson (BCJ) numerators in Del Duca-Dixon-Maltoni (DDM) form for arbitrary number of particles in any spacetime dimensions. In this work, we give a set of very straightforward graphic rules based on spanning trees for a direct evaluation of the BCJ numerators for YM and NLSM. Such rules can be derived from the Laplace expansion of the corresponding reduced Pfaffian. For YM, the each one of the (n−2)! DDM form BCJ numerators contains exactly (n−1)! terms, corresponding to the increasing trees with respect to the color order. For NLSM, the number of nonzero numerators is at most (n−2)!−(n−3)!, less than those of several previous constructions.

  4. Investigation of previously derived Hyades, Coma, and M67 reddenings

    International Nuclear Information System (INIS)

    Taylor, B.J.

    1980-01-01

    New Hyades polarimetry and field star photometry have been obtained to check the Hyades reddening, which was found to be nonzero in a previous paper. The new Hyades polarimetry implies essentially zero reddening; this is also true of polarimetry published by Behr (which was incorrectly interpreted in the previous paper). Four photometric techniques which are presumed to be insensitive to blanketing are used to compare the Hyades to nearby field stars; these four techniques also yield essentially zero reddening. When all of these results are combined with others which the author has previously published and a simultaneous solution for the Hyades, Coma, and M67 reddenings is made, the results are E (B-V) =3 +- 2 (sigma) mmag, -1 +- 3 (sigma) mmag, and 46 +- 6 (sigma) mmag, respectively. No support for a nonzero Hyades reddening is offered by the new results. When the newly obtained reddenings for the Hyades, Coma, and M67 are compared with results from techniques given by Crawford and by users of the David Dunlap Observatory photometric system, no differences between the new and other reddenings are found which are larger than about 2 sigma. The author had previously found that the M67 main-sequence stars have about the same blanketing as that of Coma and less blanketing than the Hyades; this conclusion is essentially unchanged by the revised reddenings

  5. A literature survey on numerical heat transfer

    Science.gov (United States)

    Shih, T. M.

    1982-12-01

    Technical papers in the area of numerical heat transfer published from 1977 through 1981 are reviewed. The journals surveyed include: (1) ASME Journal of Heat Transfer, (2) International Journal of Heat and Mass Transfer, (3) AIAA Journal, (4) Numerical Heat Transfer, (5) Computers and Fluids, (6) International Journal for Numerical Methods in Engineering, (7) SIAM Journal of Numerical Analysis, and (8) Journal of Computational Physics. This survey excludes experimental work in heat transfer and numerical schemes that are not applied to equations governing heat transfer phenomena. The research work is categorized into the following areas: (A) conduction, (B) boundary-layer flows, (C) momentum and heat transfer in cavities, (D) turbulent flows, (E) convection around cylinders and spheres or within annuli, (F) numerical convective instability, (G) radiation, (H) combustion, (I) plumes, jets, and wakes, (J) heat transfer in porous media, (K) boiling, condensation, and two-phase flows, (L) developing and fully developed channel flows, (M) combined heat and mass transfer, (N) applications, (O) comparison and properties of numerical schemes, and (P) body-fitted coordinates and nonuniform grids.

  6. Poet's Market, 1997: Where & How To Publish Your Poetry.

    Science.gov (United States)

    Martin, Christine, Ed.; Bentley, Chantelle, Ed.

    This directory provides 1700 listings and evaluations of poetry publishers--300 more than in the previous edition--along with complete submission and contact information. Listings include both domestic and international markets, from mass circulation and literary magazines to small presses and university quarterlies, and contain complete profiles…

  7. Numerical comparison of grid pattern diffraction effects through measurement and modeling with OptiScan software

    Science.gov (United States)

    Murray, Ian B.; Densmore, Victor; Bora, Vaibhav; Pieratt, Matthew W.; Hibbard, Douglas L.; Milster, Tom D.

    2011-06-01

    Coatings of various metalized patterns are used for heating and electromagnetic interference (EMI) shielding applications. Previous work has focused on macro differences between different types of grids, and has shown good correlation between measurements and analyses of grid diffraction. To advance this work, we have utilized the University of Arizona's OptiScan software, which has been optimized for this application by using the Babinet Principle. When operating on an appropriate computer system, this algorithm produces results hundreds of times faster than standard Fourier-based methods, and allows realistic cases to be modeled for the first time. By using previously published derivations by Exotic Electro-Optics, we compare diffraction performance of repeating and randomized grid patterns with equivalent sheet resistance using numerical performance metrics. Grid patterns of each type are printed on optical substrates and measured energy is compared against modeled energy.

  8. Reactor Thermal Hydraulic Numerical Calculation And Modeling

    International Nuclear Information System (INIS)

    Duong Ngoc Hai; Dang The Ba

    2008-01-01

    In the paper the results of analysis of thermal hydraulic state models using the numerical codes such as COOLOD, EUREKA and RELAP5 for simulation of the reactor thermal hydraulic states are presented. The calculations, analyses of reactor thermal hydraulic state and safety were implemented using different codes. The received numerical results, which were compared each to other, to experiment measurement of Dalat (Vietnam) research reactor and published results, show their appropriateness and capacity for analyses of different appropriate cases. (author)

  9. Augmenting Data with Published Results in Bayesian Linear Regression

    Science.gov (United States)

    de Leeuw, Christiaan; Klugkist, Irene

    2012-01-01

    In most research, linear regression analyses are performed without taking into account published results (i.e., reported summary statistics) of similar previous studies. Although the prior density in Bayesian linear regression could accommodate such prior knowledge, formal models for doing so are absent from the literature. The goal of this…

  10. Research in applied mathematics, numerical analysis, and computer science

    Science.gov (United States)

    1984-01-01

    Research conducted at the Institute for Computer Applications in Science and Engineering (ICASE) in applied mathematics, numerical analysis, and computer science is summarized and abstracts of published reports are presented. The major categories of the ICASE research program are: (1) numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; (2) control and parameter identification; (3) computational problems in engineering and the physical sciences, particularly fluid dynamics, acoustics, and structural analysis; and (4) computer systems and software, especially vector and parallel computers.

  11. Publishing Ethics and Predatory Practices: A Dilemma for All Stakeholders of Science Communication.

    Science.gov (United States)

    Gasparyan, Armen Yuri; Yessirkepov, Marlen; Diyanova, Svetlana N; Kitas, George D

    2015-08-01

    Publishing scholarly articles in traditional and newly-launched journals is a responsible task, requiring diligence from authors, reviewers, editors, and publishers. The current generation of scientific authors has ample opportunities for publicizing their research. However, they have to selectively target journals and publish in compliance with the established norms of publishing ethics. Over the past few years, numerous illegitimate or predatory journals have emerged in most fields of science. By exploiting gold Open Access publishing, these journals paved the way for low-quality articles that threatened to change the landscape of evidence-based science. Authors, reviewers, editors, established publishers, and learned associations should be informed about predatory publishing practices and contribute to the trustworthiness of scholarly publications. In line with this, there have been several attempts to distinguish legitimate and illegitimate journals by blacklisting unethical journals (the Jeffrey Beall's list), issuing a statement on transparency and best publishing practices (the Open Access Scholarly Publishers Association's and other global organizations' draft document), and tightening the indexing criteria by the Directory of Open Access Journals. None of these measures alone turned to be sufficient. All stakeholders of science communication should be aware of multiple facets of unethical practices and publish well-checked and evidence-based articles.

  12. THE QUALITY CRITERIA AND SELF-PUBLISHING IN SCIENTIFIC PUBLISHING

    Directory of Open Access Journals (Sweden)

    Almudena Mangas-Vega

    2015-11-01

    Full Text Available Self-publishing is a growing phenomenon in recent years. It is a process that goes beyond a simple change of leader in the publication, since it involves also a change of role of agents that were consolidated over time. A self-published work does not have to mean lack of quality, so it is important to define parameters and indicators that help its evaluation and identify who has the responsibility of those criteria. The article shows these aspects from the possibilities for cross-platform publishing and concludes with an analysis of the aspects that can be considered in assessing the quality of self-publishing.

  13. Embracing Electronic Publishing.

    Science.gov (United States)

    Wills, Gordon

    1996-01-01

    Electronic publishing is the grandest revolution in the capture and dissemination of academic and professional knowledge since Caxton developed the printing press. This article examines electronic publishing, describes different electronic publishing scenarios (authors' cooperative, consolidator/retailer/agent oligopsony, publisher oligopoly), and…

  14. Numerical methods in nuclear engineering. Part 1

    International Nuclear Information System (INIS)

    Phillips, G.J.

    1983-08-01

    These proceedings, published in two parts contain the full text of 56 papers and summaries of six papers presented at the conference. They cover the use of numerical methods in thermal hydraulics, reactor physics, neutron diffusion, subchannel analysis, risk assessment, transport theory, and fuel behaviour

  15. Numerical analysis of electromagnetic fields

    CERN Document Server

    Zhou Pei Bai

    1993-01-01

    Numerical methods for solving boundary value problems have developed rapidly. Knowledge of these methods is important both for engineers and scientists. There are many books published that deal with various approximate methods such as the finite element method, the boundary element method and so on. However, there is no textbook that includes all of these methods. This book is intended to fill this gap. The book is designed to be suitable for graduate students in engineering science, for senior undergraduate students as well as for scientists and engineers who are interested in electromagnetic fields. Objective Numerical calculation is the combination of mathematical methods and field theory. A great number of mathematical concepts, principles and techniques are discussed and many computational techniques are considered in dealing with practical problems. The purpose of this book is to provide students with a solid background in numerical analysis of the field problems. The book emphasizes the basic theories ...

  16. Extensible numerical library in JAVA

    International Nuclear Information System (INIS)

    Aso, T.; Okazawa, H.; Takashimizu, N.

    2001-01-01

    The authors present the current status of the project for developing the numerical library in JAVA. The authors have presented how object-oriented techniques improve usage and also development of numerical libraries compared with the conventional way at previous conference. The authors need many functions for data analysis which is not provided within JAVA language, for example, good random number generators, special functions and so on. Authors' development strategy is focused on easiness of implementation and adding new features by users themselves not only by developers. In HPC field, there are other focus efforts to develop numerical libraries in JAVA. However, their focus is on the performance of execution, not easiness of extension. Following the strategy, the authors have designed and implemented more classes for random number generators and so on

  17. Numerical Calculation of Transport Based on the Drift-Kinetic Equation for Plasmas in General Toroidal Magnetic Geometry: Numerical Methods

    International Nuclear Information System (INIS)

    Reynolds, J. M.; Lopez-Bruna, D.

    2009-01-01

    In this report we continue with the description of a newly developed numerical method to solve the drift kinetic equation for ions and electrons in toroidal plasmas. Several numerical aspects, already outlined in a previous report [Informes Tecnicos Ciemat 1165, mayo 2009], will be treated now in more detail. Aside from discussing the method in the context of other existing codes, various aspects will be now explained from the viewpoint of numerical methods: the way to solve convection equations, the adopted boundary conditions, the real-space meshing procedures along with a new software developed to build them, and some additional questions related with the parallelization and the numerical integration. (Author) 16 refs

  18. Analysis of thirteen predatory publishers: a trap for eager-to-publish researchers.

    Science.gov (United States)

    Bolshete, Pravin

    2018-01-01

    To demonstrate a strategy employed by predatory publishers to trap eager-to-publish authors or researchers into submitting their work. This was a case study of 13 potential, possible, or probable predatory scholarly open-access publishers with similar characteristics. Eleven publishers were included from Beall's list and two additional publishers were identified from a Google web search. Each publisher's site was visited and its content analyzed. Publishers publishing biomedical journals were further explored and additional data was collected regarding their volumes, details of publications and editorial-board members. Overall, the look and feel of all 13 publishers was similar including names of publishers, website addresses, homepage content, homepage images, list of journals and subject areas, as if they were copied and pasted. There were discrepancies in article-processing charges within the publishers. None of the publishers identified names in their contact details and primarily included only email addresses. Author instructions were similar across all 13 publishers. Most publishers listed journals of varied subject areas including biomedical journals (12 publishers) covering different geographic locations. Most biomedical journals published none or very few articles. The highest number of articles published by any single biomedical journal was 28. Several editorial-board members were listed across more than one journals, with one member listed 81 times in different 69 journals (i.e. twice in 12 journals). There was a strong reason to believe that predatory publishers may have several publication houses with different names under a single roof to trap authors from different geographic locations.

  19. Reproducibility discrepancies following reanalysis of raw data for a previously published study on diisononyl phthalate (DINP in rats

    Directory of Open Access Journals (Sweden)

    Min Chen

    2017-08-01

    Full Text Available A 2011 publication by Boberg et al. entitled “Reproductive and behavioral effects of diisononyl phthalate (DINP in perinatally exposed rats” [1] reported statistically significant changes in sperm parameters, testicular histopathology, anogenital distance and retained nipples in developing males. Using the statistical methods as reported by Boberg et al. (2011 [1], we reanalyzed the publically available raw data ([dataset] US EPA (United States Environmental Protection Agency, 2016 [2]. The output of our reanalysis and the discordances with the data as published in Boberg et al. (2011 [1] are highlighted herein. Further discussion of the basis for the replication discordances and the insufficiency of the Boberg et al. (2011 [1] response to address them can be found in a companion letter of correspondence (doi: 10.1016/j.reprotox.2017.03.013.; (Morfeld et al., 2011 [3].

  20. Numerical simulation of carbon dioxide effects in geothermal reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Moya, S.L.; Iglesias, E.R. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-03-01

    We developed and coded a new equation of state (EOS) for water-carbon dioxide mixtures and coupled it to the TOUGH numerical simulator. This EOS is valid up to 350{degrees}C and 500 bar. Unlike previous thermodynamical models, it rigorously considers the non-ideal behavior of both components in the gaseous mixture and formally includes the effect of the compressibility of the liquid phase. We refer to the coupling of this EOS with TOUGH as TOUGH-DIOX. To complement this enhancement of TOUGH, we added indexed output files for easy selection and interpretation of results. We validated TOUGH-DIOX against published results. Furthermore we used TOUGH-DIOX to explore and compare mass and energy inflow performance relationships of geothermal wells with/without carbon dioxide (CO{sub 2}). Our results include the effects of a broad range of fluid and formation properties, initial conditions and history of reservoir production. This work contributes with generalized dimensionless inflow performance relationships appropriate for geothermal use.

  1. Plagiarism in scientific publishing.

    Science.gov (United States)

    Masic, Izet

    2012-12-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader's own scientific contribution. There is no general regulation of control of

  2. Predictive effects of previous episodes on the risk of recurrence in depressive and bipolar disorders

    DEFF Research Database (Denmark)

    Kessing, Lars Vedel; Andersen, Per Kragh

    2005-01-01

    Findings from several studies have suggested that the risk of recurrence increases with the number of previous episodes in depressive and bipolar disorders. However, a comprehensive and critical review of the literature published during the past century shows that in several previous studies...

  3. Numerical models for differential problems

    CERN Document Server

    Quarteroni, Alfio

    2017-01-01

    In this text, we introduce the basic concepts for the numerical modelling of partial differential equations. We consider the classical elliptic, parabolic and hyperbolic linear equations, but also the diffusion, transport, and Navier-Stokes equations, as well as equations representing conservation laws, saddle-point problems and optimal control problems. Furthermore, we provide numerous physical examples which underline such equations. We then analyze numerical solution methods based on finite elements, finite differences, finite volumes, spectral methods and domain decomposition methods, and reduced basis methods. In particular, we discuss the algorithmic and computer implementation aspects and provide a number of easy-to-use programs. The text does not require any previous advanced mathematical knowledge of partial differential equations: the absolutely essential concepts are reported in a preliminary chapter. It is therefore suitable for students of bachelor and master courses in scientific disciplines, an...

  4. A numerical simulation of pre-big bang cosmology

    CERN Document Server

    Maharana, J P; Veneziano, Gabriele

    1998-01-01

    We analyse numerically the onset of pre-big bang inflation in an inhomogeneous, spherically symmetric Universe. Adding a small dilatonic perturbation to a trivial (Milne) background, we find that suitable regions of space undergo dilaton-driven inflation and quickly become spatially flat ($\\Omega \\to 1$). Numerical calculations are pushed close enough to the big bang singularity to allow cross checks against previously proposed analytic asymptotic solutions.

  5. Publisher Correction: Measuring progress from nationally determined contributions to mid-century strategies

    Science.gov (United States)

    Iyer, Gokul; Ledna, Catherine; Clarke, Leon; Edmonds, James; McJeon, Haewon; Kyle, Page; Williams, James H.

    2018-03-01

    In the version of this Article previously published, technical problems led to the wrong summary appearing on the homepage, and an incorrect Supplementary Information file being uploaded. Both errors have now been corrected.

  6. A bibliography on parallel and vector numerical algorithms

    Science.gov (United States)

    Ortega, James M.; Voigt, Robert G.; Romine, Charles H.

    1988-01-01

    This is a bibliography on numerical methods. It also includes a number of other references on machine architecture, programming language, and other topics of interest to scientific computing. Certain conference proceedings and anthologies which have been published in book form are also listed.

  7. False gold: Safely navigating open access publishing to avoid predatory publishers and journals.

    Science.gov (United States)

    McCann, Terence V; Polacsek, Meg

    2018-04-01

    The aim of this study was to review and discuss predatory open access publishing in the context of nursing and midwifery and develop a set of guidelines that serve as a framework to help clinicians, educators and researchers avoid predatory publishers. Open access publishing is increasingly common across all academic disciplines. However, this publishing model is vulnerable to exploitation by predatory publishers, posing a threat to nursing and midwifery scholarship and practice. Guidelines are needed to help researchers recognize predatory journals and publishers and understand the negative consequences of publishing in them. Discussion paper. A literature search of BioMed Central, CINAHL, MEDLINE with Full Text and PubMed for terms related to predatory publishing, published in the period 2007-2017. Lack of awareness of the risks and pressure to publish in international journals, may result in nursing and midwifery researchers publishing their work in dubious open access journals. Caution should be taken prior to writing and submitting a paper, to avoid predatory publishers. The advantage of open access publishing is that it provides readers with access to peer-reviewed research as soon as it is published online. However, predatory publishers use deceptive methods to exploit open access publishing for their own profit. Clear guidelines are needed to help researchers navigate safely open access publishing. A deeper understanding of the risks of predatory publishing is needed. Clear guidelines should be followed by nursing and midwifery researchers seeking to publish their work in open access journals. © 2017 John Wiley & Sons Ltd.

  8. NASAwide electronic publishing system: Electronic printing and duplicating, stage-2 evaluation report (GSFC)

    Science.gov (United States)

    Tuey, Richard C.; Lane, Robert; Hart, Susan V.

    1995-01-01

    The NASA Scientific and Technical Information Office was assigned the responsibility to continue with the expansion of the NASAwide networked electronic duplicating effort by including the Goddard Space Flight Center (GSFC) as an additional node to the existing configuration of networked electronic duplicating systems within NASA. The subject of this report is the evaluation of a networked electronic duplicating system which meets the duplicating requirements and expands electronic publishing capabilities without increasing current operating costs. This report continues the evaluation reported in 'NASA Electronic Publishing System - Electronic Printing and Duplicating Evaluation Report' (NASA TM-106242) and 'NASA Electronic Publishing System - Stage 1 Evaluation Report' (NASA TM-106510). This report differs from the previous reports through the inclusion of an external networked desktop editing, archival, and publishing functionality which did not exist with the previous networked electronic duplicating system. Additionally, a two-phase approach to the evaluation was undertaken; the first was a paper study justifying a 90-day, on-site evaluation, and the second phase was to validate, during the 90-day evaluation, the cost benefits and productivity increases that could be achieved in an operational mode. A benchmark of the functionality of the networked electronic publishing system and external networked desktop editing, archival, and publishing system was performed under a simulated daily production environment. This report can be used to guide others in determining the most cost effective duplicating/publishing alternative through the use of cost/benefit analysis and return on investment techniques. A treatise on the use of these techniques can be found by referring to 'NASA Electronic Publishing System -Cost/Benefit Methodology' (NASA TM-106662).

  9. Developments in Publishing: The Potential of Digital Publishing

    OpenAIRE

    X. Tian

    2007-01-01

    This research aims to identify issues associated with the impact of digital technology on the publishing industry with a specific focus on aspects of the sustainability of existing business models in Australia. Based on the case studies, interviews and Australian-wide online surveys, the research presents a review of the traditional business models in book publishing for investigating their effectiveness in a digital environment. It speculates on how and what should be considered for construc...

  10. PLAGIARISM IN SCIENTIFIC PUBLISHING

    Science.gov (United States)

    Masic, Izet

    2012-01-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader’s own scientific contribution. There is no general regulation of control of

  11. Constructing exact symmetric informationally complete measurements from numerical solutions

    Science.gov (United States)

    Appleby, Marcus; Chien, Tuan-Yow; Flammia, Steven; Waldron, Shayne

    2018-04-01

    Recently, several intriguing conjectures have been proposed connecting symmetric informationally complete quantum measurements (SIC POVMs, or SICs) and algebraic number theory. These conjectures relate the SICs to their minimal defining algebraic number field. Testing or sharpening these conjectures requires that the SICs are expressed exactly, rather than as numerical approximations. While many exact solutions of SICs have been constructed previously using Gröbner bases, this method has probably been taken as far as is possible with current computer technology (except in special cases where there are additional symmetries). Here, we describe a method for converting high-precision numerical solutions into exact ones using an integer relation algorithm in conjunction with the Galois symmetries of an SIC. Using this method, we have calculated 69 new exact solutions, including nine new dimensions, where previously only numerical solutions were known—which more than triples the number of known exact solutions. In some cases, the solutions require number fields with degrees as high as 12 288. We use these solutions to confirm that they obey the number-theoretic conjectures, and address two questions suggested by the previous work.

  12. A Study on New Pochonka Published in A.D. 1792

    Science.gov (United States)

    Ahn, Sang-Hyeon

    2009-12-01

    New Pochonka published in the eighteenth century of the Choson dynasty was composed of star-charts based on the new observations made by Jesuits in China and songs corrected a little bit from previous version of Pochonka. The asterisms in the previous Pochonka are listed in the same order to that in the Song dynasty's literature; while the asterisms in the new Pochonka are listed in accordance with Pu-tien-ko published in China after the Ming dynasty. The Chinese-style twelve-equatorial-section system is adopted in the new Pochonka, while in its song is adopted the zodiac system, which can be seen in the star-charts of previous version of Pochonka. The asterisms belonging to three or four neighboring lunar-mansions are drawn in one chart. Each chart covers asterisms not belonging to a certain range of right ascension, but to a certain lunar mansion. We estimate the forming era of the new Pochonka from the following facts; that the Ling-Tai-I-Hsiang-Chih was used to make charts and footnotes whose archetype can be found in the Chinese literature around A.D. 1700, that these Chinese books were imported into Choson in A.D. 1709, that the naming taboo to the emperor Khang-Hsi was used, that the order of Shen-Hsiu (參宿) was transposed with Tshui-Hsiu (자宿), and that the new Pochonka was substituted for the old version when the rules of Royal Astronomical Bureau was reformed in A.D. 1791. In conclusion, the parent sources of the charts and footnotes of the new Pochonka might be imported from the Ching dynasty around 1709 A.D. to form the new Pochonka between A.D. 1709 and A.D. 1791, and finally to be published in A.D. 1792. We discuss the possible future works to make a firm conclusion.

  13. Utility-preserving anonymization for health data publishing.

    Science.gov (United States)

    Lee, Hyukki; Kim, Soohyung; Kim, Jong Wook; Chung, Yon Dohn

    2017-07-11

    Publishing raw electronic health records (EHRs) may be considered as a breach of the privacy of individuals because they usually contain sensitive information. A common practice for the privacy-preserving data publishing is to anonymize the data before publishing, and thus satisfy privacy models such as k-anonymity. Among various anonymization techniques, generalization is the most commonly used in medical/health data processing. Generalization inevitably causes information loss, and thus, various methods have been proposed to reduce information loss. However, existing generalization-based data anonymization methods cannot avoid excessive information loss and preserve data utility. We propose a utility-preserving anonymization for privacy preserving data publishing (PPDP). To preserve data utility, the proposed method comprises three parts: (1) utility-preserving model, (2) counterfeit record insertion, (3) catalog of the counterfeit records. We also propose an anonymization algorithm using the proposed method. Our anonymization algorithm applies full-domain generalization algorithm. We evaluate our method in comparison with existence method on two aspects, information loss measured through various quality metrics and error rate of analysis result. With all different types of quality metrics, our proposed method show the lower information loss than the existing method. In the real-world EHRs analysis, analysis results show small portion of error between the anonymized data through the proposed method and original data. We propose a new utility-preserving anonymization method and an anonymization algorithm using the proposed method. Through experiments on various datasets, we show that the utility of EHRs anonymized by the proposed method is significantly better than those anonymized by previous approaches.

  14. Open-Access Publishing

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2013-06-01

    Full Text Available Nature, one of the most prominent scientific journals dedicated one of its issues to recent changes in scientific publishing (Vol. 495, Issue 7442, 27 March 2013. Its editors stressed that words technology and revolution are closely related when it comes to scientific publishing. In addition, the transformation of research publishing is not as much a revolution than an attrition war in which all sides are buried. The most important change they refer to is the open-access model in which an author or an institution pays in advance for publishing a paper in a journal, and the paper is then available to users on the Internet free of charge.According to preliminary results of a survey conducted among 23 000 scientists by the publisher of Nature, 45% of them believes all papers should be published in open access, but at the same time 22% of them would not allow the use of papers for commercial purposes. Attitudes toward open access vary according to scientific disciplines, leading the editors to conclude the revolution still does not suit everyone.

  15. Publisher Correction

    DEFF Research Database (Denmark)

    Turcot, Valérie; Lu, Yingchang; Highland, Heather M

    2018-01-01

    In the published version of this paper, the name of author Emanuele Di Angelantonio was misspelled. This error has now been corrected in the HTML and PDF versions of the article.......In the published version of this paper, the name of author Emanuele Di Angelantonio was misspelled. This error has now been corrected in the HTML and PDF versions of the article....

  16. Numerical simulation of GEW equation using RBF collocation method

    Directory of Open Access Journals (Sweden)

    Hamid Panahipour

    2012-08-01

    Full Text Available The generalized equal width (GEW equation is solved numerically by a meshless method based on a global collocation with standard types of radial basis functions (RBFs. Test problems including propagation of single solitons, interaction of two and three solitons, development of the Maxwellian initial condition pulses, wave undulation and wave generation are used to indicate the efficiency and accuracy of the method. Comparisons are made between the results of the proposed method and some other published numerical methods.

  17. Publishing and Revising Content

    Science.gov (United States)

    Editors and Webmasters can publish content without going through a workflow. Publishing times and dates can be set, and multiple pages can be published in bulk. Making an edit to published content created a revision.

  18. A second chance for authors of hijacked journals to publish in legitimate journals.

    Science.gov (United States)

    Jalalian, Mehrdad

    2015-01-01

    This article proposes the republication of articles that have previously been published in counterfeit websites of hijacked journals. The paper also discusses the technical and ethical aspects of republishing such articles.

  19. Numerical modeling of slow shocks

    International Nuclear Information System (INIS)

    Winske, D.

    1987-01-01

    This paper reviews previous attempt and the present status of efforts to understand the structure of slow shocks by means of time dependent numerical calculations. Studies carried out using MHD or hybrid-kinetic codes have demonstrated qualitative agreement with theory. A number of unresolved issues related to hybrid simulations of the internal shock structure are discussed in some detail. 43 refs., 8 figs

  20. The IAEA as a publisher

    International Nuclear Information System (INIS)

    1965-01-01

    One of the largest publishing enterprises in Vienna has developed in then Agency, incidental to its function of disseminating scientific information. The Agency recently completed its sixth year of scientific publication of literature dealing with the peaceful uses of atomic energy. Quite early in the history of IAEA, this work grew to considerable dimensions. In 1959 the programme consisted of two volumes in the Proceedings series, one in the Safety series, and four Technical Directories, making a total in that year of 18 000 books, in addition to those prepared for free distribution. In the following year, as Agency meetings and other activities developed, the list was much longer consisting of six volumes in the Proceedings series, two in the Safety series, two in the Technical Directory series, eight in the Review series, two in the Bibliographical series, three panel reports, one volume in the legal series and the first issue of 'Nuclear Fusion'. The total number of volumes sold was 24 000, in addition to the large number for free distribution. Thereafter, there was some difficulty in keeping up with the expanding demands, and some arrears of contract printing began to accumulate. It was therefore decided to introduce internal printing of Agency publications. The adoption of the 'cold type' method in 1962 led to considerable savings and faster production. During 1963, printing and binding equipment was installed which rendered the Agency independent of contractual services. Current policy is to print and bind internally all IAEA publications except the journal, 'Nuclear Fusion', Average annual production now consists of about twenty volumes of the proceedings of scientific meetings, six technical directories (the Directory of Nuclear Reactors has been published in its fifth edition), several bibliographies and numerous technical reports

  1. Publishing bioethics and bioethics--reflections on academic publishing by a journal editor.

    Science.gov (United States)

    Schüklenk, Udo

    2011-02-01

    This article by one of the Editors of Bioethics, published in the 25th anniversary issue of the journal, describes some of the revolutionary changes academic publishing has undergone during the last decades. Many humanities journals went from typically small print-runs, counting by the hundreds, to on-line availability in thousands of university libraries worldwide. Article up-take by our subscribers can be measured efficiently. The implications of this and other changes to academic publishing are discussed. Important ethical challenges need to be addressed in areas such as the enforcement of plagiarism-related policies, the so-called 'impact factor' and its impact on academic integrity, and the question of whether on-line only publishing can currently guarantee the integrity of academic publishing histories. © 2010 Blackwell Publishing Ltd.

  2. What Desktop Publishing Can Teach Professional Writing Students about Publishing.

    Science.gov (United States)

    Dobberstein, Michael

    1992-01-01

    Points out that desktop publishing is a metatechnology that allows professional writing students access to the production phase of publishing, giving students hands-on practice in preparing text for printing and in learning how that preparation affects the visual meaning of documents. (SR)

  3. Numerical orbit generators of artificial earth satellites

    Science.gov (United States)

    Kugar, H. K.; Dasilva, W. C. C.

    1984-04-01

    A numerical orbit integrator containing updatings and improvements relative to the previous ones that are being utilized by the Departmento de Mecanica Espacial e Controle (DMC), of INPE, besides incorporating newer modellings resulting from the skill acquired along the time is presented. Flexibility and modularity were taken into account in order to allow future extensions and modifications. Characteristics of numerical accuracy, processing quickness, memory saving as well as utilization aspects were also considered. User's handbook, whole program listing and qualitative analysis of accuracy, processing time and orbit perturbation effects were included as well.

  4. Numerical investigation of potential stratification caused by a cryogenic helium spill inside a tunnel

    Science.gov (United States)

    Sinclair, Cameron; Malecha, Ziemowit; Jedrusyna, Artur

    2018-04-01

    The sudden release of cryogenic fluid into an accelerator tunnel can pose a significant health and safety risk. For this reason, it is important to evaluate the consequences of such a spill. Previous publications concentrated on either Oxygen Deficiency Hazard or the evaluation of mathematical models using experimental data. No studies to date have focussed on the influence of cryogen inlet conditions on flow development. In this paper, the stratification behaviour of low-temperature helium released into an air-filled accelerator tunnel is investigated for varying helium inlet diameters. A numerical model was constructed using the OpenFOAM Toolbox of a generalised 3D geometry, with similar hydraulic characteristics to the CERN and SLAC tunnels. This model has been validated against published experimental and numerical data. A dimensionless parameter, based on Bakke number, was then determined for the onset of stratification, taking into account the helium inlet diameter; a dimensionless parameter for the degree of stratification was also employed. The simulated flow behaviour is described in terms of these dimensionless parameters, as well as the temperature and oxygen concentration at various heights throughout the tunnel.

  5. [Trends of electronic publishing in medicine and life sciences].

    Science.gov (United States)

    Strelski-Waisman, Neta; Waisman, Dan

    2005-09-01

    Scientific publication in the electronic media is gaining popularity in academic libraries, research institutions and commercial organizations. The electronic journal may shorten the processes of writing and publication, decrease publication and distribution costs, and enable access from any location in the world. Electronic publications have unique advantages: it is possible to search them, to create hyperlinks to references and footnotes, as well as to information on the web and to include graphics and photographs at a very low cost. Audio, video and tri-dimensional images may also be included. Electronic publishing may also speed up review and publication processes and enable the writer to receive immediate feedback through the web. However, in spite of the advantages, there are certain points that must be considered: accessibility to previously published material is not guaranteed as databases are not always stable and coverage may change without notice. In addition, the price that commercial publishers charge for their services may be very high or be subject to the purchase of a packaged deal that may include unwanted databases. Many issues of copyright and the use of published material are not yet finalized. In this review we discuss the advantages and disadvantages of the electronic scientific publication, the feasibility of keeping appropriate quality and peer-review process, the stability and accessibility of databases managed by the publishers and the acceptance of the electronic format by scientists and clinicians.

  6. Reinvention of publishers' revenue model: expectations of advertisers towards publishers' products

    OpenAIRE

    Koller, Hans; Dennstedt, Bianca

    2017-01-01

    Publishers have to reconsider their revenue model. Facing a massive decline in the circulation of newspapers and magazines over the past years, publishers have lost not only readers but also many advertisers. Thus, publishers are faced with both changed customer expectations as well as difficulty in generating profit. Users are increasingly less willing to pay for digital products and their expectations of digital content have changed: They would like to contribute their own content as well a...

  7. Numerical Hydrodynamics and Magnetohydrodynamics in General Relativity

    Directory of Open Access Journals (Sweden)

    Font José A.

    2008-09-01

    Full Text Available This article presents a comprehensive overview of numerical hydrodynamics and magnetohydrodynamics (MHD in general relativity. Some significant additions have been incorporated with respect to the previous two versions of this review (2000, 2003, most notably the coverage of general-relativistic MHD, a field in which remarkable activity and progress has occurred in the last few years. Correspondingly, the discussion of astrophysical simulations in general-relativistic hydrodynamics is enlarged to account for recent relevant advances, while those dealing with general-relativistic MHD are amply covered in this review for the first time. The basic outline of this article is nevertheless similar to its earlier versions, save for the addition of MHD-related issues throughout. Hence, different formulations of both the hydrodynamics and MHD equations are presented, with special mention of conservative and hyperbolic formulations well adapted to advanced numerical methods. A large sample of numerical approaches for solving such hyperbolic systems of equations is discussed, paying particular attention to solution procedures based on schemes exploiting the characteristic structure of the equations through linearized Riemann solvers. As previously stated, a comprehensive summary of astrophysical simulations in strong gravitational fields is also presented. These are detailed in three basic sections, namely gravitational collapse, black-hole accretion, and neutron-star evolutions; despite the boundaries, these sections may (and in fact do overlap throughout the discussion. The material contained in these sections highlights the numerical challenges of various representative simulations. It also follows, to some extent, the chronological development of the field, concerning advances in the formulation of the gravitational field, hydrodynamics and MHD equations and the numerical methodology designed to solve them. To keep the length of this article reasonable

  8. Numerical calculation of particle collection efficiency in an ...

    Indian Academy of Sciences (India)

    Theoretical and numerical research has been previously done on ESPs to predict the efficiency ... Lagrangian simulations of particle transport in wire–plate ESP were .... The collection efficiency can be defined as the ratio of the number of ...

  9. Publisher Correction

    DEFF Research Database (Denmark)

    Bonàs-Guarch, Sílvia; Guindo-Martínez, Marta; Miguel-Escalada, Irene

    2018-01-01

    In the originally published version of this Article, the affiliation details for Santi González, Jian'an Luan and Claudia Langenberg were inadvertently omitted. Santi González should have been affiliated with 'Barcelona Supercomputing Center (BSC), Joint BSC-CRG-IRB Research Program in Computatio......In the originally published version of this Article, the affiliation details for Santi González, Jian'an Luan and Claudia Langenberg were inadvertently omitted. Santi González should have been affiliated with 'Barcelona Supercomputing Center (BSC), Joint BSC-CRG-IRB Research Program...

  10. Optimizing the performance of streaming numerical kernels on the IBM Blue Gene/P PowerPC 450 processor

    KAUST Repository

    Malas, Tareq Majed Yasin

    2012-05-21

    Several emerging petascale architectures use energy-efficient processors with vectorized computational units and in-order thread processing. On these architectures the sustained performance of streaming numerical kernels, ubiquitous in the solution of partial differential equations, represents a challenge despite the regularity of memory access. Sophisticated optimization techniques are required to fully utilize the CPU. We propose a new method for constructing streaming numerical kernels using a high-level assembly synthesis and optimization framework. We describe an implementation of this method in Python targeting the IBM® Blue Gene®/P supercomputer\\'s PowerPC® 450 core. This paper details the high-level design, construction, simulation, verification, and analysis of these kernels utilizing a subset of the CPU\\'s instruction set. We demonstrate the effectiveness of our approach by implementing several three-dimensional stencil kernels over a variety of cached memory scenarios and analyzing the mechanically scheduled variants, including a 27-point stencil achieving a 1.7× speedup over the best previously published results. © The Author(s) 2012.

  11. Getting Your Textbook Published.

    Science.gov (United States)

    Irwin, Armond J.

    1982-01-01

    Points to remember in getting a textbook published are examined: book idea, publisher's sales representatives, letter of inquiry, qualifications for authorship, author information form, idea proposal, reviews, marketing and sales, publishing agreement, author royalties, and copyright assignment. (CT)

  12. Publisher Correction to

    NARCIS (Netherlands)

    Barrio, Isabel C.; Lindén, Elin; Beest, Te Mariska; Olofsson, Johan; Rocha, Adrian; Soininen, Eeva M.; Alatalo, Juha M.; Andersson, Tommi; Asmus, Ashley; Boike, Julia; Bråthen, Kari Anne; Bryant, John P.; Buchwal, Agata; Bueno, C.G.; Christie, Katherine S.; Egelkraut, Dagmar; Ehrich, Dorothee; Fishback, Lee Ann; Forbes, Bruce C.; Gartzia, Maite; Grogan, Paul; Hallinger, Martin; Heijmans, Monique M.P.D.; Hik, David S.; Hofgaard, Annika; Holmgren, Milena; Høye, Toke T.; Huebner, Diane C.; Jónsdóttir, Ingibjörg Svala; Kaarlejärvi, Elina; Kumpula, Timo; Lange, Cynthia Y.M.J.G.; Lange, Jelena; Lévesque, Esther; Limpens, Juul; Macias-Fauria, Marc; Myers-Smith, Isla; Nieukerken, van Erik J.; Normand, Signe; Post, Eric S.; Schmidt, Niels Martin; Sitters, Judith; Skoracka, Anna; Sokolov, Alexander; Sokolova, Natalya; Speed, James D.M.; Street, Lorna E.; Sundqvist, Maja K.; Suominen, Otso; Tananaev, Nikita; Tremblay, Jean Pierre; Urbanowicz, Christine; Uvarov, Sergey A.; Watts, David; Wilmking, Martin; Wookey, Philip A.; Zimmermann, Heike H.; Zverev, Vitali; Kozlov, Mikhail V.

    2018-01-01

    The above mentioned article was originally scheduled for publication in the special issue on Ecology of Tundra Arthropods with guest editors Toke T. Høye . Lauren E. Culler. Erroneously, the article was published in Polar Biology, Volume 40, Issue 11, November, 2017. The publisher sincerely

  13. A survey on the reference citation in the case reports published in The Journal of the Korean Radiological Society

    International Nuclear Information System (INIS)

    Lee, Hong Jae; Lee, Han Jin; Park, Seog Hee; Kim, Choon Yul; Bahk, Yong Whee; Shinn, Kyung Sub

    1993-01-01

    We analyzed 105 case reports published in The Journal of the Korean Radiological Society between 1975 and 1985. The objectives of this studies were to find out (1) whether those case reports were truly original or not as far as domestic publications were concerned and (2) whether their citations of domestic literatures were correct. In two papers, we found previous reports published already in the domestic journal in spite of the authors' claim as their 'first case reports'. In 105 case reports, only 94 references were cited while 151 omitted. It is concluded that a case report must include a statement to authentically clarify whether similar report had been previously published through meticulous review of published literatures. We also recommend to computerize the index of domestic literatures

  14. Desktop Publishing Made Simple.

    Science.gov (United States)

    Wentling, Rose Mary

    1989-01-01

    The author discusses the types of computer hardware and software necessary to set up a desktop publishing system, both for use in educational administration and for instructional purposes. Classroom applications of desktop publishing are presented. The author also provides guidelines for preparing to teach desktop publishing. (CH)

  15. Desktop Publishing: A Brave New World and Publishing from the Desktop.

    Science.gov (United States)

    Lormand, Robert; Rowe, Jane J.

    1988-01-01

    The first of two articles presents basic selection criteria for desktop publishing software packages, including discussion of expectations, required equipment, training costs, publication size, desired software features, additional equipment needed, and quality control. The second provides a brief description of desktop publishing using the Apple…

  16. A Learned Society's Perspective on Publishing.

    Science.gov (United States)

    Suzuki, Kunihiko; Edelson, Alan; Iversen, Leslie L; Hausmann, Laura; Schulz, Jörg B; Turner, Anthony J

    2016-10-01

    Scientific journals that are owned by a learned society, like the Journal of Neurochemistry (JNC), which is owned by the International Society for Neurochemistry (ISN), benefit the scientific community in that a large proportion of the income is returned to support the scientific mission of the Society. The income generated by the JNC enables the ISN to organize conferences as a platform for members and non-members alike to share their research, supporting researchers particularly in developing countries by travel grants and other funds, and promoting education in student schools. These direct benefits and initiatives for ISN members and non-members distinguish a society journal from pure commerce. However, the world of scholarly publishing is changing rapidly. Open access models have challenged the business model of traditional journal subscription and hence provided free access to publicly funded scientific research. In these models, the manuscript authors pay a publication cost after peer review and acceptance of the manuscript. Over the last decade, numerous new open access journals have been launched and traditional subscription journals have started to offer open access (hybrid journals). However, open access journals follow the general scheme that, of all participating parties, the publisher receives the highest financial benefit. The income is generated by researchers whose positions and research are mostly financed by taxpayers' or funders' money, and by reviewers and editors, who frequently are not reimbursed. Last but not least, the authors pay for the publication of their work after a rigorous and sometimes painful review process. JNC itself has an open access option, at a significantly reduced cost for Society members as an additional benefit. This article provides first-hand insights from two former Editors-in-Chief, Kunihiko Suzuki and Leslie Iversen, about the history of JNC's ownership and about the difficulties and battles fought along the way to

  17. E-publishing and multimodalities

    OpenAIRE

    Yngve Nordkvelle

    2008-01-01

    In the literature of e-publishing there has been a consistent call from the advent of e-publishing on, until now, to explore new ways of expressing ideas through the new media. It has been claimed that the Internet opens an alley of possibilities and opportunites for publishing that will change the ways of publishing once and for all. In the area of publication of e-journals, however, the call for changes has received very modest responds.The thing is, it appears, that the conventional paper ...

  18. Optimizing The Performance of Streaming Numerical Kernels On The IBM Blue Gene/P PowerPC 450

    KAUST Repository

    Malas, Tareq

    2011-07-01

    Several emerging petascale architectures use energy-efficient processors with vectorized computational units and in-order thread processing. On these architectures the sustained performance of streaming numerical kernels, ubiquitous in the solution of partial differential equations, represents a formidable challenge despite the regularity of memory access. Sophisticated optimization techniques beyond the capabilities of modern compilers are required to fully utilize the Central Processing Unit (CPU). The aim of the work presented here is to improve the performance of streaming numerical kernels on high performance architectures by developing efficient algorithms to utilize the vectorized floating point units. The importance of the development time demands the creation of tools to enable simple yet direct development in assembly to utilize the power-efficient cores featuring in-order execution and multiple-issue units. We implement several stencil kernels for a variety of cached memory scenarios using our Python instruction simulation and generation tool. Our technique simplifies the development of efficient assembly code for the IBM Blue Gene/P supercomputer\\'s PowerPC 450. This enables us to perform high-level design, construction, verification, and simulation on a subset of the CPU\\'s instruction set. Our framework has the capability to implement streaming numerical kernels on current and future high performance architectures. Finally, we present several automatically generated implementations, including a 27-point stencil achieving a 1.7x speedup over the best previously published results.

  19. Academic Nightmares: Predatory Publishing

    Science.gov (United States)

    Van Nuland, Sonya E.; Rogers, Kem A.

    2017-01-01

    Academic researchers who seek to publish their work are confronted daily with a barrage of e-mails from aggressive marketing campaigns that solicit them to publish their research with a specialized, often newly launched, journal. Known as predatory journals, they often promise high editorial and publishing standards, yet their exploitive business…

  20. Extensive numerical study of a D-brane, anti-D-brane system in AdS5/CFT4

    International Nuclear Information System (INIS)

    Hegedűs, Árpád

    2015-01-01

    In this paper the hybrid-NLIE approach of http://dx.doi.org/10.1007/JHEP08(2012)022 is extended to the ground state of a D-brane anti-D-brane system in AdS/CFT. The hybrid-NLIE equations presented in the paper are finite component alternatives of the previously proposed TBA equations and they admit an appropriate framework for the numerical investigation of the ground state of the problem. Straightforward numerical iterative methods fail to converge, thus new numerical methods are worked out to solve the equations. Our numerical data confirm the previous TBA data. In view of the numerical results the mysterious L=1 case is also commented in the paper.

  1. [Parathyroid cancer in a patient with previous history of hypernephroma: a clinical case].

    Science.gov (United States)

    Martín Navarro, J; Mendoza, E; Mateos, P; Cereceda, A; Coca, S

    2007-01-01

    We report the clinical case of a 55 year-old male patient, with a previous history of nephrectomy by hypernephroma sixteen years ago, first presenting hypercalcemia and rising of intact parathyroid hormone (iPTH) levels. A localization study revealed an intrathyroid nodule with cystic appearance. After undergoing a hemi-thyroidectomy, the patient is diagnosed with parathyroid carcinoma. This article analyzes previously published cases presenting parathyroidal pathologies associated with hypernephroma. A broader differential diagnosis--including the screening of parathyroidal pathologies should be considered in patients with hypercalcemia and hypernephroma.

  2. European Conference on Numerical Mathematics and Advanced Applications

    CERN Document Server

    Manguoğlu, Murat; Tezer-Sezgin, Münevver; Göktepe, Serdar; Uğur, Ömür

    2016-01-01

    The European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), held every 2 years, provides a forum for discussing recent advances in and aspects of numerical mathematics and scientific and industrial applications. The previous ENUMATH meetings took place in Paris (1995), Heidelberg (1997), Jyvaskyla (1999), Ischia (2001), Prague (2003), Santiago de Compostela (2005), Graz (2007), Uppsala (2009), Leicester (2011) and Lausanne (2013). This book presents a selection of invited and contributed lectures from the ENUMATH 2015 conference, which was organised by the Institute of Applied Mathematics (IAM), Middle East Technical University, Ankara, Turkey, from September 14 to 18, 2015. It offers an overview of central recent developments in numerical analysis, computational mathematics, and applications in the form of contributions by leading experts in the field.

  3. Preresidency publication record and its association with publishing during paediatric residency.

    Science.gov (United States)

    Gupta, Ronish; Norris, Mark Lorne; Writer, Hilary

    2016-05-01

    To determine whether an association exists between the publication of journal articles before and during paediatrics residency. A retrospective search of PubMed was conducted for publications by all 567 Canadian paediatricians certified between 2009 and 2012, inclusive. Paediatricians were separated into groups based on the number of articles published preresidency (0 or ≥1) and during residency (0 or ≥1). The methodology was validated using a group of local paediatricians who were contacted to verify whether their publications were identified accurately. A total of 160 of 567 (28%) certified paediatricians had preresidency publications; of these, 93 (58%) subsequently published during their residency period. Among the remaining 407 (72%) paediatricians without preresidency publications, 129 (32%) published during residency. The association between publication before and during paediatric residency was statistically significant (OR 2.98 [95% CI 2.04 to 4.36]; Ppublication status with 87% and 90% accuracy, respectively. Individuals with previous publications were more likely to publish as residents; however, 42% of individuals with pre-residency publications did not publish as residents. Residency selection committees may find these data helpful in assessing the publication potential of their applicants. In addition, this information may assist in building more targeted and individualized research curricula within residency programs.

  4. When three is not some: on the pragmatics of numerals.

    Science.gov (United States)

    Shetreet, Einat; Chierchia, Gennaro; Gaab, Nadine

    2014-04-01

    Both numerals and quantifiers (like some) have more than one possible interpretation (i.e., weak and strong interpretations). Some studies have found similar behavior for numerals and quantifiers, whereas others have shown critical differences. It is, therefore, debated whether they are processed in the same way. A previous fMRI investigation showed that the left inferior frontal gyrus is linked to the computation of the strong interpretation of quantifiers (derived by a scalar implicature) and that the left middle frontal gyrus and the medial frontal gyrus are linked to processing the mismatch between the strong interpretation of quantifiers and the context in which they are presented. In the current study, we attempted to characterize the similarities and differences between numbers and quantifiers by examining brain activation patterns related to the processing of numerals in these brain regions. When numbers were presented in a mismatch context (i.e., where their strong interpretation did not match the context), they elicited brain activations similar to those previously observed with quantifiers in the same context type. Conversely, in a match context (i.e., where both interpretations of the scalar item matched the context), numbers elicited a different activation pattern than the one observed with quantifiers: Left inferior frontal gyrus activations in response to the match condition showed decrease for numbers (but not for quantifiers). Our results support previous findings suggesting that, although they share some features, numbers and quantifiers are processed differently. We discuss our results in light of various theoretical approaches linked to the representation of numerals.

  5. Publishing: The Creative Business.

    Science.gov (United States)

    Bohne, Harald; Van Ierssel, Harry

    This book offers guidelines to emerging and would-be publishers, whether they plan to enter publishing as a career, a sideline, or a diversion. It stresses the business aspects of publishing and emphasizes the major housekeeping functions encountered in the business, except methods of sales and distribution. Contents include "The Mechanics of…

  6. Persistent seropositivity for yellow fever in a previously vaccinated autologous hematopoietic stem cell transplantation recipient.

    Science.gov (United States)

    Hayakawa, Kayoko; Takasaki, Tomohiko; Tsunemine, Hiroko; Kanagawa, Shuzo; Kutsuna, Satoshi; Takeshita, Nozomi; Mawatari, Momoko; Fujiya, Yoshihiro; Yamamoto, Kei; Ohmagari, Norio; Kato, Yasuyuki

    2015-08-01

    The duration of a protective level of yellow fever antibodies after autologous hematopoietic stem cell transplantation in a previously vaccinated person is unclear. The case of a patient who had previously been vaccinated for yellow fever and who remained seropositive for 22 months after autologous peripheral blood stem cell transplantation for malignant lymphoma is described herein. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. The Adriatic response to the bora forcing. A numerical study

    International Nuclear Information System (INIS)

    Rachev, N.

    2001-01-01

    This paper deals with the bora wind effect on the Adriatic Sea circulation as simulated by a 3-D numerical code (the DieCAST model). The main result of this forcing is the formation of intense upwelling along the eastern coast in agreement with previous theoretical studies and observations. Different numerical experiments are discussed for various boundary and initial conditions to evaluate their influence on both circulation and upwelling patterns

  8. On the mechanics of cerebral aneurysms: experimental research and numerical simulation

    Science.gov (United States)

    Parshin, D. V.; Kuianova, I. O.; Yunoshev, A. S.; Ovsyannikov, K. S.; Dubovoy, A. V.

    2017-10-01

    This research extends existing experimental data for CA tissues [1, 2] and presents the preliminary results of numerical calculations. Experiments were performed to measure aneurysm wall stiffness and the data obtained was analyzed. To reconstruct the geometry of the CAs, DICOM images of real patients with aneurysms and ITK Snap [3] were used. In addition, numerical calculations were performed in ANSYS (commercial software, License of Lavrentyev Institute of Hydrodynamics). The results of these numerical calculations show a high level of agreement with experimental data from previous literature.

  9. Unmitigated numerical solution to the diffraction term in the parabolic nonlinear ultrasound wave equation.

    Science.gov (United States)

    Hasani, Mojtaba H; Gharibzadeh, Shahriar; Farjami, Yaghoub; Tavakkoli, Jahan

    2013-09-01

    Various numerical algorithms have been developed to solve the Khokhlov-Kuznetsov-Zabolotskaya (KZK) parabolic nonlinear wave equation. In this work, a generalized time-domain numerical algorithm is proposed to solve the diffraction term of the KZK equation. This algorithm solves the transverse Laplacian operator of the KZK equation in three-dimensional (3D) Cartesian coordinates using a finite-difference method based on the five-point implicit backward finite difference and the five-point Crank-Nicolson finite difference discretization techniques. This leads to a more uniform discretization of the Laplacian operator which in turn results in fewer calculation gridding nodes without compromising accuracy in the diffraction term. In addition, a new empirical algorithm based on the LU decomposition technique is proposed to solve the system of linear equations obtained from this discretization. The proposed empirical algorithm improves the calculation speed and memory usage, while the order of computational complexity remains linear in calculation of the diffraction term in the KZK equation. For evaluating the accuracy of the proposed algorithm, two previously published algorithms are used as comparison references: the conventional 2D Texas code and its generalization for 3D geometries. The results show that the accuracy/efficiency performance of the proposed algorithm is comparable with the established time-domain methods.

  10. Moyamoya disease in a child with previous acute necrotizing encephalopathy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Taik-Kun; Cha, Sang Hoon; Chung, Kyoo Byung; Kim, Jung Hyuck; Kim, Baek Hyun; Chung, Hwan Hoon [Department of Diagnostic Radiology, Korea University College of Medicine, Ansan Hospital, 516 Kojan-Dong, Ansan City, Kyungki-Do 425-020 (Korea); Eun, Baik-Lin [Department of Pediatrics, Korea University College of Medicine, Seoul (Korea)

    2003-09-01

    A previously healthy 24-day-old boy presented with a 2-day history of fever and had a convulsion on the day of admission. MRI showed abnormal signal in the thalami, caudate nuclei and central white matter. Acute necrotising encephalopathy was diagnosed, other causes having been excluded after biochemical and haematological analysis of blood, urine and CSF. He recovered, but with spastic quadriparesis. At the age of 28 months, he suffered sudden deterioration of consciousness and motor weakness of his right limbs. MRI was consistent with an acute cerebrovascular accident. Angiography showed bilateral middle cerebral artery stenosis or frank occlusion with numerous lenticulostriate collateral vessels consistent with moyamoya disease. (orig.)

  11. Publishing studies: what else?

    Directory of Open Access Journals (Sweden)

    Bertrand Legendre

    2015-07-01

    Full Text Available This paper intends to reposition “publishing studies” in the long process that goes from the beginning of book history to the current research on cultural industries. It raises questions about interdisciplinarity and the possibility of considering publishing independently of other sectors of the media and cultural offerings. Publishing is now included in a large range of industries and, at the same time, analyses tend to become more and more segmented according to production sectors and scientific fields. In addition to the problems created, from the professional point of view, by this double movement, this one requires a questioning of the concept of “publishing studies”.

  12. Analyses of more than 60,000 exomes questions the role of numerous genes previously associated with dilated cardiomyopathy

    DEFF Research Database (Denmark)

    Nouhravesh, Nina; Ahlberg, Gustav; Ghouse, Jonas

    2016-01-01

    BACKGROUND: Hundreds of genetic variants have been described as disease causing in dilated cardiomyopathy (DCM). Some of these associations are now being questioned. We aimed to identify the prevalence of previously DCM associated variants in the Exome Aggregation Consortium (ExAC), in order...... to identify potentially false-positive DCM variants. METHODS: Variants listed as DCM disease-causing variants in the Human Gene Mutation Database were extracted from ExAC. Pathogenicity predictions for these variants were mined from dbNSFP v 2.9 database. RESULTS: Of the 473 DCM variants listed in HGMD, 148...... (31%) were found in ExAC. The expected number of individuals with DCM in ExAC is 25 based on the prevalence in the general population. Yet, 35 variants were found in more than 25 individuals. In 13 genes, we identified all variants previously associated with DCM; four genes contained variants above...

  13. Numerical study of thermal test of a cask of transportation for radioactive material

    International Nuclear Information System (INIS)

    Vieira, Tiago A.S.; Santos, André A.C. dos; Vidal, Guilherme A.M.; Silva Junior, Geraldo E.

    2017-01-01

    In this study numerical simulations of a transport cask for radioactive material were made and the numerical results were compared with experimental results of tests carried out in two different opportunities. A mesh study was also made regarding the previously designed geometry of the same cask, in order to evaluate its impact in relation to the stability of numerical results for this type of problem. The comparison of the numerical and experimental results allowed to evaluate the need to plan and carry out a new test in order to validate the CFD codes used in the numerical simulations

  14. δ-dependency for privacy-preserving XML data publishing.

    Science.gov (United States)

    Landberg, Anders H; Nguyen, Kinh; Pardede, Eric; Rahayu, J Wenny

    2014-08-01

    An ever increasing amount of medical data such as electronic health records, is being collected, stored, shared and managed in large online health information systems and electronic medical record systems (EMR) (Williams et al., 2001; Virtanen, 2009; Huang and Liou, 2007) [1-3]. From such rich collections, data is often published in the form of census and statistical data sets for the purpose of knowledge sharing and enabling medical research. This brings with it an increasing need for protecting individual people privacy, and it becomes an issue of great importance especially when information about patients is exposed to the public. While the concept of data privacy has been comprehensively studied for relational data, models and algorithms addressing the distinct differences and complex structure of XML data are yet to be explored. Currently, the common compromise method is to convert private XML data into relational data for publication. This ad hoc approach results in significant loss of useful semantic information previously carried in the private XML data. Health data often has very complex structure, which is best expressed in XML. In fact, XML is the standard format for exchanging (e.g. HL7 version 3(1)) and publishing health information. Lack of means to deal directly with data in XML format is inevitably a serious drawback. In this paper we propose a novel privacy protection model for XML, and an algorithm for implementing this model. We provide general rules, both for transforming a private XML schema into a published XML schema, and for mapping private XML data to the new privacy-protected published XML data. In addition, we propose a new privacy property, δ-dependency, which can be applied to both relational and XML data, and that takes into consideration the hierarchical nature of sensitive data (as opposed to "quasi-identifiers"). Lastly, we provide an implementation of our model, algorithm and privacy property, and perform an experimental analysis

  15. Publishers and repositories

    CERN Multimedia

    CERN. Geneva

    2007-01-01

    The impact of self-archiving on journals and publishers is an important topic for all those involved in scholarly communication. There is some evidence that the physics arXiv has had no impact on physics journals, while 'economic common sense' suggests that some impact is inevitable. I shall review recent studies of librarian attitudes towards repositories and journals, and place this in the context of IOP Publishing's experiences with arXiv. I shall offer some possible reasons for the mis-match between these perspectives and then discuss how IOP has linked with arXiv and experimented with OA publishing. As well as launching OA journals we have co-operated with Cornell and the arXiv on Eprintweb.org, a platform that offers new features to repository users. View Andrew Wray's biography

  16. Previously unknown species of Aspergillus.

    Science.gov (United States)

    Gautier, M; Normand, A-C; Ranque, S

    2016-08-01

    The use of multi-locus DNA sequence analysis has led to the description of previously unknown 'cryptic' Aspergillus species, whereas classical morphology-based identification of Aspergillus remains limited to the section or species-complex level. The current literature highlights two main features concerning these 'cryptic' Aspergillus species. First, the prevalence of such species in clinical samples is relatively high compared with emergent filamentous fungal taxa such as Mucorales, Scedosporium or Fusarium. Second, it is clearly important to identify these species in the clinical laboratory because of the high frequency of antifungal drug-resistant isolates of such Aspergillus species. Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) has recently been shown to enable the identification of filamentous fungi with an accuracy similar to that of DNA sequence-based methods. As MALDI-TOF MS is well suited to the routine clinical laboratory workflow, it facilitates the identification of these 'cryptic' Aspergillus species at the routine mycology bench. The rapid establishment of enhanced filamentous fungi identification facilities will lead to a better understanding of the epidemiology and clinical importance of these emerging Aspergillus species. Based on routine MALDI-TOF MS-based identification results, we provide original insights into the key interpretation issues of a positive Aspergillus culture from a clinical sample. Which ubiquitous species that are frequently isolated from air samples are rarely involved in human invasive disease? Can both the species and the type of biological sample indicate Aspergillus carriage, colonization or infection in a patient? Highly accurate routine filamentous fungi identification is central to enhance the understanding of these previously unknown Aspergillus species, with a vital impact on further improved patient care. Copyright © 2016 European Society of Clinical Microbiology and

  17. Does previous use affect litter box appeal in multi-cat households?

    Science.gov (United States)

    Ellis, J J; McGowan, R T S; Martin, F

    2017-08-01

    It is commonly assumed that cats actively avoid eliminated materials (especially in multi-cat homes), suggesting regular litter box cleaning as the best defense against out-of-box elimination. The relationship between previous use and litter box appeal to familiar subsequent users is currently unknown. The purpose of this study was to investigate the relationship between previous litter box use and the identity of the previous user, type of elimination, odor, and presence of physical/visual obstructions in a multi-cat household scenario. Cats preferred a clean litter box to a dirty one, but the identity of the previous user had no impact on preferences. While the presence of odor from urine and/or feces did not impact litter box preferences, the presence of odorless faux-urine and/or feces did - with the presence of faux-feces being preferred over faux-urine. Results suggest neither malodor nor chemical communication play a role in litter box preferences, and instead emphasize the importance of regular removal of physical/visual obstructions as the key factor in promoting proper litter box use. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  18. Common integration sites of published datasets identified using a graph-based framework

    Directory of Open Access Journals (Sweden)

    Alessandro Vasciaveo

    2016-01-01

    Full Text Available With next-generation sequencing, the genomic data available for the characterization of integration sites (IS has dramatically increased. At present, in a single experiment, several thousand viral integration genome targets can be investigated to define genomic hot spots. In a previous article, we renovated a formal CIS analysis based on a rigid fixed window demarcation into a more stretchy definition grounded on graphs. Here, we present a selection of supporting data related to the graph-based framework (GBF from our previous article, in which a collection of common integration sites (CIS was identified on six published datasets. In this work, we will focus on two datasets, ISRTCGD and ISHIV, which have been previously discussed. Moreover, we show in more detail the workflow design that originates the datasets.

  19. Books average previous decade of economic misery.

    Science.gov (United States)

    Bentley, R Alexander; Acerbi, Alberto; Ormerod, Paul; Lampos, Vasileios

    2014-01-01

    For the 20(th) century since the Depression, we find a strong correlation between a 'literary misery index' derived from English language books and a moving average of the previous decade of the annual U.S. economic misery index, which is the sum of inflation and unemployment rates. We find a peak in the goodness of fit at 11 years for the moving average. The fit between the two misery indices holds when using different techniques to measure the literary misery index, and this fit is significantly better than other possible correlations with different emotion indices. To check the robustness of the results, we also analysed books written in German language and obtained very similar correlations with the German economic misery index. The results suggest that millions of books published every year average the authors' shared economic experiences over the past decade.

  20. The BiPublishers ranking: Main results and methodological problems when constructing rankings of academic publishers

    Directory of Open Access Journals (Sweden)

    Torres-Salinas, Daniel

    2015-12-01

    Full Text Available We present the results of the Bibliometric Indicators for Publishers project (also known as BiPublishers. This project represents the first attempt to systematically develop bibliometric publisher rankings. The data for this project was derived from the Book Citation Index and the study time period was 2009-2013. We have developed 42 rankings: 4 by fields and 38 by disciplines. We display six indicators for publishers divided into three types: output, impact and publisher’s profile. The aim is to capture different characteristics of the research performance of publishers. 254 publishers were processed and classified according to publisher type: commercial publishers and university presses. We present the main publishers by field and then discuss the principal challenges presented when developing this type of tool. The BiPublishers ranking is an on-going project which aims to develop and explore new data sources and indicators to better capture and define the research impact of publishers.Presentamos los resultados del proyecto Bibliometric Indicators for Publishers (BiPublishers. Es el primer proyecto que desarrolla de manera sistemática rankings bibliométricos de editoriales. La fuente de datos empleada es el Book Citation Index y el periodo de análisis 2009-2013. Se presentan 42 rankings: 4 por áreas y 38 por disciplinas. Mostramos seis indicadores por editorial divididos según su tipología: producción, impacto y características editoriales. Se procesaron 254 editoriales y se clasificaron según el tipo: comerciales y universitarias. Se presentan las principales editoriales por áreas. Después, se discuten los principales retos a superar en el desarrollo de este tipo de herramientas. El ranking Bipublishers es un proyecto en desarrollo que persigue analizar y explorar nuevas fuentes de datos e indicadores para captar y definir el impacto de las editoriales académicas.

  1. Numerical method for three dimensional steady-state two-phase flow calculations

    International Nuclear Information System (INIS)

    Raymond, P.; Toumi, I.

    1992-01-01

    This paper presents the numerical scheme which was developed for the FLICA-4 computer code to calculate three dimensional steady state two phase flows. This computer code is devoted to steady state and transient thermal hydraulics analysis of nuclear reactor cores 1,3 . The first section briefly describes the FLICA-4 flow modelling. Then in order to introduce the numerical method for steady state computations, some details are given about the implicit numerical scheme based upon an approximate Riemann solver which was developed for calculation of flow transients. The third section deals with the numerical method for steady state computations, which is derived from this previous general scheme and its optimization. We give some numerical results for steady state calculations and comparisons on required CPU time and memory for various meshing and linear system solvers

  2. Data Sharing & Publishing at Nature Publishing Group

    Science.gov (United States)

    VanDecar, J. C.; Hrynaszkiewicz, I.; Hufton, A. L.

    2015-12-01

    In recent years, the research community has come to recognize that upon-request data sharing has important limitations1,2. The Nature-titled journals feel that researchers have a duty to share data without undue qualifications, in a manner that allows others to replicate and build upon their published findings. Historically, the Nature journals have been strong supporters of data deposition in communities with existing data mandates, and have required data sharing upon request in all other cases. To help address some of the limitations of upon-request data sharing, the Nature titles have strengthened their existing data policies and forged a new partnership with Scientific Data, to promote wider data sharing in discoverable, citeable and reusable forms, and to ensure that scientists get appropriate credit for sharing3. Scientific Data is a new peer-reviewed journal for descriptions of research datasets, which works with a wide of range of public data repositories4. Articles at Scientific Data may either expand on research publications at other journals or may be used to publish new datasets. The Nature Publishing Group has also signed the Joint Declaration of Data Citation Principles5, and Scientific Data is our first journal to include formal data citations. We are currently in the process of adding data citation support to our various journals. 1 Wicherts, J. M., Borsboom, D., Kats, J. & Molenaar, D. The poor availability of psychological research data for reanalysis. Am. Psychol. 61, 726-728, doi:10.1037/0003-066x.61.7.726 (2006). 2 Vines, T. H. et al. Mandated data archiving greatly improves access to research data. FASEB J. 27, 1304-1308, doi:10.1096/fj.12-218164 (2013). 3 Data-access practices strengthened. Nature 515, 312, doi:10.1038/515312a (2014). 4 More bang for your byte. Sci. Data 1, 140010, doi:10.1038/sdata.2014.10 (2014). 5 Data Citation Synthesis Group: Joint Declaration of Data Citation Principles. (FORCE11, San Diego, CA, 2014).

  3. Microwave Breast Imaging System Prototype with Integrated Numerical Characterization

    Directory of Open Access Journals (Sweden)

    Mark Haynes

    2012-01-01

    Full Text Available The increasing number of experimental microwave breast imaging systems and the need to properly model them have motivated our development of an integrated numerical characterization technique. We use Ansoft HFSS and a formalism we developed previously to numerically characterize an S-parameter- based breast imaging system and link it to an inverse scattering algorithm. We show successful reconstructions of simple test objects using synthetic and experimental data. We demonstrate the sensitivity of image reconstructions to knowledge of the background dielectric properties and show the limits of the current model.

  4. Global characteristics of geomagnetic excursions as seen in global empirical models and a numerical geodynamo simulation

    Science.gov (United States)

    Korte, M. C.; Wardinski, I.; Brown, M. C.

    2016-12-01

    Paleomagnetic results from sediments and lava flows provide observational evidence of numerous geomagnetic excursions throughout Earth's history. Two new spherical harmonic geomagnetic field models covering 50-30 ka, including the Laschamp ( 41ka) and Mono Lake ( 32-35 ka) excursions allow us to characterize the global behaviour of these events, both at Earth's surface and the core-mantle boundary. We investigate the evolution of dipole and large-scale non-dipole power throughout the duration of the model and the morphology of the large-scale radial field at the core-mantle boundary. The models suggest clear differences in both the decrease in axial dipole strength and dipole tilt between the two excursions and unlike the previously published model by Leonhardt et al. (2009), they suggest some increase of non-dipole power during the early and late stages of the Laschamp excursion. Global characteristics from the models can be directly compared with results from numerical simulations. We do so for several excursions generated by a numerical simulation driven by purely compositional convection, which appears Earth-like in terms of excursion and reversal occurrence frequency. Excursions from this simulation show differing characteristics, including differences in spectral power evolution. Some cases show similarities to the Laschamp and Mono Lake excursions in the spherical harmonic models. In particular they all indicate that excursions are mainly governed by the axial dipole term and equatorial dipole terms play a minor role.

  5. Numerical studies of fermionic field theories at large-N

    International Nuclear Information System (INIS)

    Dickens, T.A.

    1987-01-01

    A description of an algorithm, which may be used to study large-N theories with or without fermions, is presented. As an initial test of the method, the spectrum of continuum QCD in 1 + 1 dimensions is determined and compared to previously obtained results. Exact solutions of 1 + 1 dimensional lattice versions of the free fermion theory, the Gross-Neveu model, and QCD are obtained. Comparison of these exact results with results from the numerical algorithm is used to test the algorithms, and more importantly, to determine the errors incurred from the approximations used in the numerical technique. Numerical studies of the above three lattice theories in higher dimensions are also presented. The results are again compared to exact solutions for free fermions and the Gross-Neveu model; perturbation theory is used to derive expansions with which the numerical results for QCD may be compared. The numerical algorithm may also be used to study the euclidean formulation of lattice gauge theories. Results for 1 + 1 dimensional euclidean lattice QCD are compared to the exact solution of this model

  6. The Academic Publishing Industry

    DEFF Research Database (Denmark)

    Nell, Phillip Christopher; Wenzel, Tim Ole; Schmidt, Florian

    2014-01-01

    The case starts with introducing the outstanding profitability of academic journal publishers such as Elsevier and then dives into describing the research process from an idea to conducting research and to publishing the results in academic journals. Subsequently, demand and supply for scientific...... journals and papers are discussed including drivers and involved parties. Furthermore, the case describes competition between suppliers, customers, and publishers. In sum, the case study features a rich description of the industry’s many unusual attributes which allows for discussing the benefits...

  7. Extensive numerical study of a D-brane, anti-D-brane system in AdS{sub 5}/CFT{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Hegedűs, Árpád [MTA Lendület Holographic QFT Group, Wigner Research Centre,H-1525 Budapest 114, P.O.B. 49 (Hungary)

    2015-04-20

    In this paper the hybrid-NLIE approach of http://dx.doi.org/10.1007/JHEP08(2012)022 is extended to the ground state of a D-brane anti-D-brane system in AdS/CFT. The hybrid-NLIE equations presented in the paper are finite component alternatives of the previously proposed TBA equations and they admit an appropriate framework for the numerical investigation of the ground state of the problem. Straightforward numerical iterative methods fail to converge, thus new numerical methods are worked out to solve the equations. Our numerical data confirm the previous TBA data. In view of the numerical results the mysterious L=1 case is also commented in the paper.

  8. Copyright of Electronic Publishing.

    Science.gov (United States)

    Dong, Elaine; Wang, Bob

    2002-01-01

    Analyzes the importance of copyright, considers the main causes of copyright infringement in electronic publishing, discusses fair use of a copyrighted work, and suggests methods to safeguard copyrighted electronic publishing, including legislation, contracts, and technology. (Author/LRW)

  9. A quasi-stationary numerical model of atomized metal droplets, II: Prediction and assessment

    DEFF Research Database (Denmark)

    Pryds, Nini H.; Hattel, Jesper Henri; Thorborg, Jesper

    1999-01-01

    been illustrated.A comparison between the numerical model and the experimental results shows an excellent agreement and demonstrates the validity of the present model, e.g. the calculated gas temperature which has an important influence on the droplet solidification behaviour as well as the calculated......A new model which extends previous studies and includes the interaction between enveloping gas and an array of droplets has been developed and presented in a previous paper. The model incorporates the probability density function of atomized metallic droplets into the heat transfer equations....... The main thrust of the model is that the gas temperature was not predetermined and calculated empirically but calculated numerically based on heat balance consideration. In this paper, the accuracy of the numerical model and the applicability of the model as a predictive tool have been investigated...

  10. Elearning and digital publishing

    CERN Document Server

    Ching, Hsianghoo Steve; Mc Naught, Carmel

    2006-01-01

    ""ELearning and Digital Publishing"" will occupy a unique niche in the literature accessed by library and publishing specialists, and by university teachers and planners. It examines the interfaces between the work done by four groups of university staff who have been in the past quite separate from, or only marginally related to, each other - library staff, university teachers, university policy makers, and staff who work in university publishing presses. All four groups are directly and intimately connected with the main functions of universities - the creation, management and dissemination

  11. Books Average Previous Decade of Economic Misery

    Science.gov (United States)

    Bentley, R. Alexander; Acerbi, Alberto; Ormerod, Paul; Lampos, Vasileios

    2014-01-01

    For the 20th century since the Depression, we find a strong correlation between a ‘literary misery index’ derived from English language books and a moving average of the previous decade of the annual U.S. economic misery index, which is the sum of inflation and unemployment rates. We find a peak in the goodness of fit at 11 years for the moving average. The fit between the two misery indices holds when using different techniques to measure the literary misery index, and this fit is significantly better than other possible correlations with different emotion indices. To check the robustness of the results, we also analysed books written in German language and obtained very similar correlations with the German economic misery index. The results suggest that millions of books published every year average the authors' shared economic experiences over the past decade. PMID:24416159

  12. How libraries use publisher metadata

    Directory of Open Access Journals (Sweden)

    Steve Shadle

    2013-11-01

    Full Text Available With the proliferation of electronic publishing, libraries are increasingly relying on publisher-supplied metadata to meet user needs for discovery in library systems. However, many publisher/content provider staff creating metadata are unaware of the end-user environment and how libraries use their metadata. This article provides an overview of the three primary discovery systems that are used by academic libraries, with examples illustrating how publisher-supplied metadata directly feeds into these systems and is used to support end-user discovery and access. Commonly seen metadata problems are discussed, with recommendations suggested. Based on a series of presentations given in Autumn 2012 to the staff of a large publisher, this article uses the University of Washington Libraries systems and services as illustrative examples. Judging by the feedback received from these presentations, publishers (specifically staff not familiar with the big picture of metadata standards work would benefit from a better understanding of the systems and services libraries provide using the data that is created and managed by publishers.

  13. Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1989-01-01

    Describes various stages involved in the applications of electronic media to the publishing industry. Highlights include computer typesetting, or photocomposition; machine-readable databases; the distribution of publications in electronic form; computer conferencing and electronic mail; collaborative authorship; hypertext; hypermedia publications;…

  14. International Marketing Developing Publishing Business

    Directory of Open Access Journals (Sweden)

    Eugenijus Chlivickas

    2015-05-01

    Full Text Available Lithuanian integration in the financial Eurozone and Lithuanian publishing business development in the European Union and outside it, becomes an important problem requiring a solution. Promoting the dissemination of printed books and literacy in Lithuania and beyond, to properly introduce the achievements of Lithuania in foreign countries, it is important to ensure Lithuanian letter, educational and scientific book publishing development. The article examines the characteristics of the international marketing publishing, the world and Lithuanian state publishing houses on the basis of foreign and Lithuanian scientists theoretical insights about the instruments of international marketing opportunities, developing proposals for publishing business integration of new economic conditions.

  15. Electrons, Electronic Publishing, and Electronic Display.

    Science.gov (United States)

    Brownrigg, Edwin B.; Lynch, Clifford A.

    1985-01-01

    Provides a perspective on electronic publishing by distinguishing between "Newtonian" publishing and "quantum-mechanical" publishing. Highlights include media and publishing, works delivered through electronic media, electronic publishing and the printed word, management of intellectual property, and recent copyright-law issues…

  16. PUBLISHER'S ANNOUNCEMENT: Refereeing standards

    Science.gov (United States)

    Bender, C.; Scriven, N.

    2004-08-01

    On 1 January 2004 I will be assuming the position of Editor-in-Chief of Journal of Physics A: Mathematical and General (J. Phys. A). I am flattered at the confidence expressed in my ability to carry out this challenging job and I will try hard to justify this confidence. The previous Editor-in-Chief, Ed Corrigan, has worked tirelessly for the last five years and has done an excellent job for the journal. Everyone at the journal is profoundly grateful for his leadership and for his achievements. Before accepting the position of Editor-in-Chief, I visited the office of J. Phys. A to examine the organization and to assess its strengths and weaknesses. This office is located at the Institute of Physics Publishing (IOPP) headquarters in Bristol. J. Phys. A has been expanding rapidly and now publishes at the rate of nearly 1000 articles (or about 14,000 pages) per year. The entire operation of the journal is conducted in a very small space---about 15 square metres! Working in this space are six highly intelligent, talented, hard working, and dedicated people: Neil Scriven, Publisher; Mike Williams, Publishing Editor; Rose Gray and Sarah Nadin, Publishing Administrators; Laura Smith and Steve Richards, Production Editors. In this small space every day about eight submitted manuscripts are downloaded from the computer or received in the post. These papers are then processed and catalogued, referees are selected, and the papers are sent out for evaluation. In this small space the referees' reports are received, publication decisions are made, and accepted articles are then published quickly by IOPP. The whole operation is amazingly efficient. Indeed, one of the great strengths of J. Phys. A is the speed at which papers are processed. The average time between the receipt of a manuscript and an editorial decision is under sixty days. (Many distinguished journals take three to five times this amount of time.) This speed of publication is an extremely strong enticement for

  17. Toxoplasma gondii and schizophrenia: a review of published RCTs.

    Science.gov (United States)

    Chorlton, Sam D

    2017-07-01

    Over the last 60 years, accumulating evidence has suggested that acute, chronic, and maternal Toxoplasma gondii infections predispose to schizophrenia. More recent evidence suggests that chronically infected patients with schizophrenia present with more severe disease. After acute infection, parasites form walled cysts in the brain, leading to lifelong chronic infection and drug resistance to commonly used antiparasitics. Chronic infection is the most studied and closely linked with development and severity of schizophrenia. There are currently four published randomized controlled trials evaluating antiparasitic drugs, specifically azithromycin, trimethoprim, artemisinin, and artemether, in patients with schizophrenia. No trials have demonstrated a change in psychopathology with adjunctive treatment. Published trials have either selected drugs without evidence against chronic infection or used them at doses too low to reduce brain cyst burden. Furthermore, trials have failed to achieve sufficient power or account for confounders such as previous antipsychotic treatment, sex, age, or rhesus status on antiparasitic effect. There are currently no ongoing trials of anti-Toxoplasma therapy in schizophrenia despite ample evidence to justify further testing.

  18. Can we use the known fast spherical fourier transforms in numerical meterology?

    OpenAIRE

    Sprengel, F.

    2001-01-01

    In numerical meteorology, there are many solvers using spectral methods. Most of the computing time is spent computing the discrete Legendre function transforms. The aim of this paper is to clarify whether the recently published fast Legendre function transforms can be used here.

  19. Dear Publisher.

    Science.gov (United States)

    Chelton, Mary K.

    1992-01-01

    Addresses issues that concern the relationship between publishers and librarians, including differences between libraries and bookstores; necessary information for advertisements; out-of-stock designations and their effect on budgets; the role of distributors and vendors; direct mail for book promotions; unsolicited review copies; communications…

  20. Publisher Correction

    DEFF Research Database (Denmark)

    Stokholm, Jakob; Blaser, Martin J.; Thorsen, Jonathan

    2018-01-01

    The originally published version of this Article contained an incorrect version of Figure 3 that was introduced following peer review and inadvertently not corrected during the production process. Both versions contain the same set of abundance data, but the incorrect version has the children...

  1. EPIC: Electronic Publishing is Cheaper.

    Science.gov (United States)

    Regier, Willis G.

    Advocates of inexpensive publishing confront a widespread complaint that there is already an overproduction of scholarship that electronic publishing will make worse. The costs of electronic publishing correlate to a clutch of choices: speeds of access, breadth and depth of content, visibility, flexibility, durability, dependability, definition of…

  2. Desktop Publishing for Counselors.

    Science.gov (United States)

    Lucking, Robert; Mitchum, Nancy

    1990-01-01

    Discusses the fundamentals of desktop publishing for counselors, including hardware and software systems and peripherals. Notes by using desktop publishing, counselors can produce their own high-quality documents without the expense of commercial printers. Concludes computers present a way of streamlining the communications of a counseling…

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-6798. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1115-2613. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0856-7212. AJOL African Journals Online.

  6. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0378-4738. AJOL African Journals Online.

  7. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0254-2765. AJOL African Journals Online.

  8. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0850-3907. AJOL African Journals Online.

  9. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2141-8322. AJOL African Journals Online.

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0794-7410. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2078-6778. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2305-8862. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-9819. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0379-4350. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2408-8137. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1029-5933. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2467-8252. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0376-4753. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1118-1028. AJOL African Journals Online.

  20. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1597-4292. AJOL African Journals Online.

  1. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0189-9686. AJOL African Journals Online.

  2. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1595-1413. AJOL African Journals Online.

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2078-5151. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1694-0423. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0855-4307. AJOL African Journals Online.

  6. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-9827. AJOL African Journals Online.

  7. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0379-9069. AJOL African Journals Online.

  8. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1998-1279. AJOL African Journals Online.

  9. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1606-7479. AJOL African Journals Online.

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1995-7262. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0856-8960. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0855-5591. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1531-4065. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1110-5607. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2076-7714. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1994-8220. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-6232. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2224-0020. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0556-8641. AJOL African Journals Online.

  20. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-5414. AJOL African Journals Online.

  1. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2305-2678. AJOL African Journals Online.

  2. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1119-3077. AJOL African Journals Online.

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1027-4332. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1998-9881. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0376-8902. AJOL African Journals Online.

  6. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2507-7961. AJOL African Journals Online.

  7. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0189-5117. AJOL African Journals Online.

  8. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1012-2796. AJOL African Journals Online.

  9. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2313-1799. AJOL African Journals Online.

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1025-9848. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2141-9884. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1727-3781. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2090-7214. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2410-8936. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0856-0714. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1684-5374. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1998-8125. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1016-0728. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1821-9241. AJOL African Journals Online.

  20. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1607-0011. AJOL African Journals Online.

  1. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. AJOL African Journals Online. HOW TO USE ...

  2. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2591 6831. AJOL African Journals Online.

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1999-7671. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1110-6859. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0794-4721. AJOL African Journals Online.

  6. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2072-6589. AJOL African Journals Online.

  7. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1680-6905. AJOL African Journals Online.

  8. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1821-8148. AJOL African Journals Online.

  9. The distance effect in numerical memory-updating tasks.

    Science.gov (United States)

    Lendínez, Cristina; Pelegrina, Santiago; Lechuga, Teresa

    2011-05-01

    Two experiments examined the role of numerical distance in updating numerical information in working memory. In the first experiment, participants had to memorize a new number only when it was smaller than a previously memorized number. In the second experiment, updating was based on an external signal, which removed the need to perform any numerical comparison. In both experiments, distance between the memorized number and the new one was manipulated. The results showed that smaller distances between the new and the old information led to shorter updating times. This graded facilitation suggests that the process by which information is substituted in the focus of attention involves maintaining the shared features between the new and the old number activated and selecting other new features to be activated. Thus, the updating cost may be related to amount of new features to be activated in the focus of attention.

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0258-252X. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0047-651X. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2360-994X. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1858-554X. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2078-676X. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1814-232X. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0303-691X. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2449-108X. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2520–7997. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0012-835X. AJOL African Journals Online.

  20. Numerical estimation in individuals with Down syndrome.

    Science.gov (United States)

    Lanfranchi, Silvia; Berteletti, Ilaria; Torrisi, Erika; Vianello, Renzo; Zorzi, Marco

    2014-10-31

    We investigated numerical estimation in children with Down syndrome (DS) in order to assess whether their pattern of performance is tied to experience (age), overall cognitive level, or specifically impaired. Siegler and Opfer's (2003) number to position task, which requires translating a number into a spatial position on a number line, was administered to a group of 21 children with DS and to two control groups of typically developing children (TD), matched for mental and chronological age. Results suggest that numerical estimation and the developmental transition between logarithm and linear patterns of estimates in children with DS is more similar to that of children with the same mental age than to children with the same chronological age. Moreover linearity was related to the cognitive level in DS while in TD children it was related to the experience level. Copyright © 2014. Published by Elsevier Ltd.

  1. Issues in Science Publishing. What's Hot and What's not?

    Directory of Open Access Journals (Sweden)

    Jaime A. Teixeira da Silva

    2015-06-01

    Full Text Available Science is in crisis: a crisis of trust, and a crisis of values. Yet, this is an opportune moment for scientists to examine the issues that underly science to discover how they may be of use, beyond their laboratory or field experience, to improve the research and publishing landscapes to create an environment that suits their needs more. Traditionally, the science publishing landscape had been controlled by the science, technology and medicine publishers, who have always taunted their peer review systems as being fail-safe. Yet, considerable moss has been gathered by the post-publication peer review (PPPR movement over the past few years, indicating that the voice of the average scientist now carries more weight, and more value, than ever before. Despite this, most scientists are unaware of their potential power of opinion. Especially when it comes to commenting on, and correcting, the already published literature. Commenting by name, or anonymously, is the new PPPR publishing reality. There needs to also be a concomitant movement away from artificial metrics, such as the impact factor, which serve only as ego-boosting parameters, and which distract the wider readership from the weaknesses of the traditional peer review system currently in place. Increasing cases of the abuse of peer review, such as the creation of fake identities, affiliations or e-mail addresses further highlights the need for scientists to be vigilant, without necessairly being vigilantes. The discovery, within a matter of years, that the literature is more corrupted than was previously thought, in some cases caused by clear cases of editorial cronyism, or abuse, has resulted in a need for scientists to exceed their functions as mere scientists to evolve into whistle-blowers. Some ethical guidelines are in place, such as those by COPE, yet what is being increasingly witnessed, is a discrepancy between preached values by select COPE member journals, and the literature that

  2. Numerical relativity

    International Nuclear Information System (INIS)

    Piran, T.

    1982-01-01

    There are many recent developments in numerical relativity, but there remain important unsolved theoretical and practical problems. The author reviews existing numerical approaches to solution of the exact Einstein equations. A framework for classification and comparison of different numerical schemes is presented. Recent numerical codes are compared using this framework. The discussion focuses on new developments and on currently open questions, excluding a review of numerical techniques. (Auth.)

  3. Scientific Journal Publishing in India: Promoting electronic publishing of scholarly journals in India

    OpenAIRE

    Abraham, Thomas; Minj, Suvarsha

    2007-01-01

    Provides a report about the Scientific Journal Publishing in India (SJPI) Project which promotes electronic publishing of scholarly journals. It covers briefly the objectives, implementation and outcomes of the Project. Open Journal Systems and Open Archives Harvester were used to achieve the goals of the Project.

  4. Publishing: Alternatives and Economics.

    Science.gov (United States)

    Penchansky, Mimi; And Others

    The Library Association of the City University of New York presents an annotated bibliography on the subject of small and alternative publishing. In the first section directories, indexes, catalogs, and reviews are briefly described. Book distributors for small publishers are listed next. The major portion of the bibliography is a listing of books…

  5. Outcomes of Peripheral Endovascular Interventions Based on Hospital Volume: A Mini Review of Published Literature

    Directory of Open Access Journals (Sweden)

    Samir V Patel

    2016-01-01

    Full Text Available Previous literature showed hospital procedural volume is an independent predictor for outcomes of various cardiac procedures. However, very few studies shown similar results for peripheral endovascular interventions especially peripheral atherectomy. Here we are reviewing previously published articles to provide volume-outcome relationship for peripheral atherectomy and angioplasty with or without endovascular stenting. We found higher hospital volume significantly and independently lowers in-hospital mortality, amputation rates, peri-procedural complications, length and cost of hospitalization for peripheral endovascular interventions.

  6. A Numerical Model for Trickle Bed Reactors

    Science.gov (United States)

    Propp, Richard M.; Colella, Phillip; Crutchfield, William Y.; Day, Marcus S.

    2000-12-01

    Trickle bed reactors are governed by equations of flow in porous media such as Darcy's law and the conservation of mass. Our numerical method for solving these equations is based on a total-velocity splitting, sequential formulation which leads to an implicit pressure equation and a semi-implicit mass conservation equation. We use high-resolution finite-difference methods to discretize these equations. Our solution scheme extends previous work in modeling porous media flows in two ways. First, we incorporate physical effects due to capillary pressure, a nonlinear inlet boundary condition, spatial porosity variations, and inertial effects on phase mobilities. In particular, capillary forces introduce a parabolic component into the recast evolution equation, and the inertial effects give rise to hyperbolic nonconvexity. Second, we introduce a modification of the slope-limiting algorithm to prevent our numerical method from producing spurious shocks. We present a numerical algorithm for accommodating these difficulties, show the algorithm is second-order accurate, and demonstrate its performance on a number of simplified problems relevant to trickle bed reactor modeling.

  7. Numerical soliton-like solutions of the potential Kadomtsev-Petviashvili equation by the decomposition method

    International Nuclear Information System (INIS)

    Kaya, Dogan; El-Sayed, Salah M.

    2003-01-01

    In this Letter we present an Adomian's decomposition method (shortly ADM) for obtaining the numerical soliton-like solutions of the potential Kadomtsev-Petviashvili (shortly PKP) equation. We will prove the convergence of the ADM. We obtain the exact and numerical solitary-wave solutions of the PKP equation for certain initial conditions. Then ADM yields the analytic approximate solution with fast convergence rate and high accuracy through previous works. The numerical solutions are compared with the known analytical solutions

  8. Numerical Recipes in C++: The Art of Scientific Computing (2nd edn). Numerical Recipes Example Book (C++) (2nd edn). Numerical Recipes Multi-Language Code CD ROM with LINUX or UNIX Single-Screen License Revised Version

    International Nuclear Information System (INIS)

    Borcherds, P

    2003-01-01

    The two Numerical Recipes books are marvellous. The principal book, The Art of Scientific Computing, contains program listings for almost every conceivable requirement, and it also contains a well written discussion of the algorithms and the numerical methods involved. The Example Book provides a complete driving program, with helpful notes, for nearly all the routines in the principal book. The first edition of Numerical Recipes: The Art of Scientific Computing was published in 1986 in two versions, one with programs in Fortran, the other with programs in Pascal. There were subsequent versions with programs in BASIC and in C. The second, enlarged edition was published in 1992, again in two versions, one with programs in Fortran (NR(F)), the other with programs in C (NR(C)). In 1996 the authors produced Numerical Recipes in Fortran 90: The Art of Parallel Scientific Computing as a supplement, called Volume 2, with the original (Fortran) version referred to as Volume 1. Numerical Recipes in C++ (NR(C++)) is another version of the 1992 edition. The numerical recipes are also available on a CD ROM: if you want to use any of the recipes, I would strongly advise you to buy the CD ROM. The CD ROM contains the programs in all the languages. When the first edition was published I bought it, and have also bought copies of the other editions as they have appeared. Anyone involved in scientific computing ought to have a copy of at least one version of Numerical Recipes, and there also ought to be copies in every library. If you already have NR(F), should you buy the NR(C++) and, if not, which version should you buy? In the preface to Volume 2 of NR(F), the authors say 'C and C++ programmers have not been far from our minds as we have written this volume, and we think that you will find that time spent in absorbing its principal lessons will be amply repaid in the future as C and C++ eventually develop standard parallel extensions'. In the preface and introduction to NR

  9. Numerical simulation of electro-osmotic consolidation coupling non-linear variation of soil parameters

    Science.gov (United States)

    Wu, Hui; Hu, Liming; Wen, Qingbo

    2017-06-01

    Electro-osmotic consolidation is an effective method for soft ground improvement. A main limitation of previous numerical models on this technique is the ignorance of the non-linear variation of soil parameters. In the present study, a multi-field numerical model is developed with the consideration of the non-linear variation of soil parameters during electro-osmotic consolidation process. The numerical simulations on an axisymmetric model indicated that the non-linear variation of soil parameters showed remarkable impact on the development of the excess pore water pressure and degree of consolidation. A field experiment with complex geometry, boundary conditions, electrode configuration and voltage application was further simulated with the developed numerical model. The comparison between field and numerical data indicated that the numerical model coupling of the non-linear variation of soil parameters gave more reasonable results. The developed numerical model is capable to analyze engineering cases with complex operating conditions.

  10. Transportation package design using numerical optimization

    International Nuclear Information System (INIS)

    Harding, D.C.; Witkowski, W.R.

    1992-01-01

    The design of structures and engineering systems has always been an iterative process whose complexity was dependent upon the boundary conditions, constraints and available analytical tools. Transportation packaging design is no exception with structural, thermal and radiation shielding constraints based on regulatory hypothetical accident conditions. Transportation packaging design is often accomplished by a group of specialists, each designing a single component based on one or more simple criteria, pooling results with the group, evaluating the open-quotes pooledclose quotes design, and then reiterating the entire process until a satisfactory design is reached. The manual iterative methods used by the designer/analyst can be summarized in the following steps: design the part, analyze the part, interpret the analysis results, modify the part, and re-analyze the part. The inefficiency of this design practice and the frequently conservative result suggests the need for a more structured design methodology, which can simultaneously consider all of the design constraints. Numerical optimization is a structured design methodology whose maturity in development has allowed it to become a primary design tool in many industries. The purpose of this overview is twofold: first, to outline the theory and basic elements of numerical optimization; and second, to show how numerical optimization can be applied to the transportation packaging industry and used to increase efficiency and safety of radioactive and hazardous material transportation packages. A more extensive review of numerical optimization and its applications to radioactive material transportation package design was performed previously by the authors (Witkowski and Harding 1992). A proof-of-concept Type B package design is also presented as a simplified example of potential improvements achievable using numerical optimization in the design process

  11. Numerical Simulation of Steady Supercavitating Flows

    OpenAIRE

    Ali Jafarian; Ahmad-Reza Pishevar

    2016-01-01

    In this research, the Supercavitation phenomenon in compressible liquid flows is simulated. The one-fluid method based on a new exact two-phase Riemann solver is used for modeling. The cavitation is considered as an isothermal process and a consistent equation of state with the physical behavior of the water is used. High speed flow of water over a cylinder and a projectile are simulated and the results are compared with the previous numerical and experimental results. The cavitation bubble p...

  12. Numerical and experimental investigation of the melt casting of explosives

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Dawei; Garimella, Suresh V. [School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907-2088 (United States); Singh, Sanjeev; Naik, Neelam [US Army Armaments Research, Development and Engineering Center, Picatinny Arsenal, NJ 07806 (United States)

    2005-10-01

    Melt casting of energetic materials is investigated, and a numerical model is formulated for the analysis of the coupled fluid flow, heat transfer, and stress fields involved in this phase-change process. The numerical model is based on a conservative multi block control volume method. The SIMPLE algorithm is employed along with an enthalpy method approach to model the solidification process. Results from the model are verified against analytical solutions, experimental results, and published numerical results for simplified cases. In the melt casting of RDX-binder mixtures, the very high viscosity of the melt limits the influence of melt convection. The impacts of different cooling conditions on the velocity, temperature and stress distributions, as well as on the solidification time, are discussed. The present model can be used to improve the quality of cast explosives, by optimizing and controlling the processing conditions. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

  13. Two new prediction rules for spontaneous pregnancy leading to live birth among subfertile couples, based on the synthesis of three previous models.

    NARCIS (Netherlands)

    C.C. Hunault; J.D.F. Habbema (Dik); M.J.C. Eijkemans (René); J.A. Collins (John); J.L.H. Evers (Johannes); E.R. te Velde (Egbert)

    2004-01-01

    textabstractBACKGROUND: Several models have been published for the prediction of spontaneous pregnancy among subfertile patients. The aim of this study was to broaden the empirical basis for these predictions by making a synthesis of three previously published models. METHODS:

  14. Publishing integrity and good practices in editing in biomedicine.

    Science.gov (United States)

    Polenakovic, Momir; Gucev, Zoran

    2014-01-01

    accept reports which support the reviewer's concepts of thinking and, like Procrustes, cutting everything else out. Authorship is often a contentious issue, as undeserved authors appear on the list of authors. Some principles are now a norm in academic publishing. This applies to the declaration of a conflict of interest, the consent of the patient and the approval of the Ethical Board of the institution. This global informational technological revolution has, unfortunately, led to largely widespread and increasingly sophisticated deviations: plagiarism, data fabrication and data falsification as forms of scientific misconduct. Those events are now more widespread than in the past. Luckily new tools to track them are much better than previously. The race for perfect publishing integrity and for the best good practices in editing in biomedicine is on. New and old challenges will be met. The benevolent and caring society, educated professionals and an enlightened public remain essential preconditions. The wealth of nations depends on R&D and consequently on academic publishing.

  15. Publisher Correction

    DEFF Research Database (Denmark)

    Turcot, Valérie; Lu, Yingchang; Highland, Heather M

    2018-01-01

    In the version of this article originally published, one of the two authors with the name Wei Zhao was omitted from the author list and the affiliations for both authors were assigned to the single Wei Zhao in the author list. In addition, the ORCID for Wei Zhao (Department of Biostatistics and E...

  16. Numerical study of magnetohydrodynamics (MHD boundary layer slip flow of a Maxwell nanofluid over an exponentially stretching surface with convective boundary condition

    Directory of Open Access Journals (Sweden)

    P.BalaAnki Reddy

    2017-12-01

    Full Text Available This paper focuses on a theoretical analysis of a steady two-dimensional magnetohydrodynamic boundary layer flow of a Maxwell fluid over an exponentially stretching surface in the presence of velocity slip and convective boundary condition. This model is used for a nanofluid, which incorporates the effects of Brownian motion and thermophoresis. The resulting non-linear partial differential equations of the governing flow field are converted into a system of coupled non-linear ordinary differential equations by using suitable similarity transformations, and the resultant equations are then solved numerically by using Runge-Kutta fourth order method along with shooting technique. A parametric study is conducted to illustrate the behavior of the velocity, temperature and concentration. The influence of significant parameters on velocity, temperature, concentration, skin friction coefficient and Nusselt number has been studied and numerical results are presented graphically and in tabular form. The reported numerical results are compared with previously published works on various special cases and are found to be an in excellent agreement. It is found that momentum boundary layer thickness decreases with the increase of magnetic parameter. It can also be found that the thermal boundary layer thickness increases with Brownian motion and thermophoresis parameters.

  17. Experimental and numerical analyses of different extended surfaces

    International Nuclear Information System (INIS)

    Diani, A; Mancin, S; Zilio, C; Rossetto, L

    2012-01-01

    Air is a cheap and safe fluid, widely used in electronic, aerospace and air conditioning applications. Because of its poor heat transfer properties, it always flows through extended surfaces, such as finned surfaces, to enhance the convective heat transfer. In this paper, experimental results are reviewed and numerical studies during air forced convection through extended surfaces are presented. The thermal and hydraulic behaviours of a reference trapezoidal finned surface, experimentally evaluated by present authors in an open-circuit wind tunnel, has been compared with numerical simulations carried out by using the commercial CFD software COMSOL Multiphysics. Once the model has been validated, numerical simulations have been extended to other rectangular finned configurations, in order to study the effects of the fin thickness, fin pitch and fin height on the thermo-hydraulic behaviour of the extended surfaces. Moreover, several pin fin surfaces have been simulated in the same range of operating conditions previously analyzed. Numerical results about heat transfer and pressure drop, for both plain finned and pin fin surfaces, have been compared with empirical correlations from the open literature, and more accurate equations have been developed, proposed, and validated.

  18. Experimental and numerical investigations of aerodynamic loads and 3D flow over non-rotating MEXICO blades

    NARCIS (Netherlands)

    Zhang, Y.; Gillebaart, T.; van Zuijlen, A.H.; van Bussel, G.J.W.; Bijl, H.

    2017-01-01

    This paper presents the experimental and numerical study on MEXICO wind turbine blades. Previous work by other researchers shows that large deviations exist in the loads comparison between numerical predictions and experimental data for the rotating MEXICO wind turbine. To reduce complexities and

  19. The handbook of journal publishing

    CERN Document Server

    Morris, Sally; LaFrenier, Douglas; Reich, Margaret

    2013-01-01

    The Handbook of Journal Publishing is a comprehensive reference work written by experienced professionals, covering all aspects of journal publishing, both online and in print. Journals are crucial to scholarly communication, but changes in recent years in the way journals are produced, financed, and used make this an especially turbulent and challenging time for journal publishers - and for authors, readers, and librarians. The Handbook offers a thorough guide to the journal publishing process, from editing and production through marketing, sales, and fulfilment, with chapters on management, finances, metrics, copyright, and ethical issues. It provides a wealth of practical tools, including checklists, sample documents, worked examples, alternative scenarios, and extensive lists of resources, which readers can use in their day-to-day work. Between them, the authors have been involved in every aspect of journal publishing over several decades and bring to the text their experience working for a wide range of ...

  20. The G3 Experience with Electronic Publishing: An Editor's Perspective

    Science.gov (United States)

    White, W. M.

    2003-12-01

    and immediately imported into programs such as Excel. Numerous animations and movies have been published in animated GIF, Apple Quicktime, Macromedia Flash, and Wolfram Research Mathreader formats. Computer models and tools have been published as Excel Macros and MATLAB Scripts. Full color, high resolution images allow superior publication of detailed maps and photographs. While G3 is a success by most measures, the process of pioneering electronic publication has at times been painful and frustrating. Early on, there were problems and delays in converting files, particularly graphics, to pdf format for both review and final publication. Costs have been higher than anticipated - primarily due to the cost of file conversion and formatting. The time from acceptance to publication (currently 10 weeks), although improving, it still longer than the goal, again because of the time required for copy-editing and formatting. Automation of this process in the future is the primary opportunity to both reduce cost and further speed publication. Authors have been slow to take advantage of the new illustration formats, with most relying on tradition figures instead. This will likely change slowly in the future, as these new formats, and the software tools to create them, become more familiar.

  1. Strategy for a numerical Rock Mechanics Site Descriptive Model. Further development of the theoretical/numerical approach

    International Nuclear Information System (INIS)

    Olofsson, Isabelle; Fredriksson, Anders

    2005-05-01

    The Swedish Nuclear and Fuel Management Company (SKB) is conducting Preliminary Site Investigations at two different locations in Sweden in order to study the possibility of a Deep Repository for spent fuel. In the frame of these Site Investigations, Site Descriptive Models are achieved. These products are the result of an interaction of several disciplines such as geology, hydrogeology, and meteorology. The Rock Mechanics Site Descriptive Model constitutes one of these models. Before the start of the Site Investigations a numerical method using Discrete Fracture Network (DFN) models and the 2D numerical software UDEC was developed. Numerical simulations were the tool chosen for applying the theoretical approach for characterising the mechanical rock mass properties. Some shortcomings were identified when developing the methodology. Their impacts on the modelling (in term of time and quality assurance of results) were estimated to be so important that the improvement of the methodology with another numerical tool was investigated. The theoretical approach is still based on DFN models but the numerical software used is 3DEC. The main assets of the programme compared to UDEC are an optimised algorithm for the generation of fractures in the model and for the assignment of mechanical fracture properties. Due to some numerical constraints the test conditions were set-up in order to simulate 2D plane strain tests. Numerical simulations were conducted on the same data set as used previously for the UDEC modelling in order to estimate and validate the results from the new methodology. A real 3D simulation was also conducted in order to assess the effect of the '2D' conditions in the 3DEC model. Based on the quality of the results it was decided to update the theoretical model and introduce the new methodology based on DFN models and 3DEC simulations for the establishment of the Rock Mechanics Site Descriptive Model. By separating the spatial variability into two parts, one

  2. How to successfully publish interdisciplinary research: learning from an Ecology and Society Special Feature

    Directory of Open Access Journals (Sweden)

    Christian Pohl

    2015-06-01

    Full Text Available What are the factors that hinder or support publishing interdisciplinary research? What does a successful interdisciplinary publishing process look like? We address these questions by analyzing the publishing process of the interdisciplinary research project titled "Mountland." Project researchers published most of their main results as a Special Feature of Ecology and Society. Using the story wall method and qualitative content analysis, we identified ten factors contributing to the success or failure of publishing interdisciplinary research. They can be assigned to four groups of resources: scientific resources, i.e., previous joint research, simultaneously written manuscripts; human resources, i.e., coordination, flexibility, composition of the team; integrative resources, i.e., vision of integration, chronology of results; and feedback resources, i.e., internal reviews, subject editors, external reviewers. According to this analysis, an ideal-typical publishing process necessitates, among other things, (1 a strong, interdisciplinary coordinator, (2 a clear shared vision of integration and a common framework, (3 flexibility in terms of money and time, (4 a certain sense of timing regarding when and how to exchange results and knowledge, (5 subject editors who are familiar with the specific project and its interdisciplinary merits, and (6 reviewers who are open minded about interdisciplinary efforts.

  3. Comparison of numerical and experimental results of the flow in the U9 Kaplan turbine model

    Energy Technology Data Exchange (ETDEWEB)

    Petit, O; Nilsson, H [Division of Fluid Mechanics, Chalmers University of Technology, Hoersalsvaegen 7A, SE-41296 Goeteborg (Sweden); Mulu, B; Cervantes, M, E-mail: olivierp@chalmers.s [Division of Fluid Mechanics, Luleaa University of Technology, SE-971 87 Luleaa (Sweden)

    2010-08-15

    The present work compares simulations made using the OpenFOAM CFD code with experimental measurements of the flow in the U9 Kaplan turbine model. Comparisons of the velocity profiles in the spiral casing and in the draft tube are presented. The U9 Kaplan turbine prototype located in Porjus and its model, located in Alvkarleby, Sweden, have curved inlet pipes that lead the flow to the spiral casing. Nowadays, this curved pipe and its effect on the flow in the turbine is not taken into account when numerical simulations are performed at design stage. To study the impact of the inlet pipe curvature on the flow in the turbine, and to get a better overview of the flow of the whole system, measurements were made on the 1:3.1 model of the U9 turbine. Previously published measurements were taken at the inlet of the spiral casing and just before the guide vanes, using the laser Doppler anemometry (LDA) technique. In the draft tube, a number of velocity profiles were measured using the LDA techniques. The present work extends the experimental investigation with a horizontal section at the inlet of the draft tube. The experimental results are used to specify the inlet boundary condition for the numerical simulations in the draft tube, and to validate the computational results in both the spiral casing and the draft tube. The numerical simulations were realized using the standard k-e model and a block-structured hexahedral wall function mesh.

  4. Comparison of numerical and experimental results of the flow in the U9 Kaplan turbine model

    Science.gov (United States)

    Petit, O.; Mulu, B.; Nilsson, H.; Cervantes, M.

    2010-08-01

    The present work compares simulations made using the OpenFOAM CFD code with experimental measurements of the flow in the U9 Kaplan turbine model. Comparisons of the velocity profiles in the spiral casing and in the draft tube are presented. The U9 Kaplan turbine prototype located in Porjus and its model, located in Älvkarleby, Sweden, have curved inlet pipes that lead the flow to the spiral casing. Nowadays, this curved pipe and its effect on the flow in the turbine is not taken into account when numerical simulations are performed at design stage. To study the impact of the inlet pipe curvature on the flow in the turbine, and to get a better overview of the flow of the whole system, measurements were made on the 1:3.1 model of the U9 turbine. Previously published measurements were taken at the inlet of the spiral casing and just before the guide vanes, using the laser Doppler anemometry (LDA) technique. In the draft tube, a number of velocity profiles were measured using the LDA techniques. The present work extends the experimental investigation with a horizontal section at the inlet of the draft tube. The experimental results are used to specify the inlet boundary condition for the numerical simulations in the draft tube, and to validate the computational results in both the spiral casing and the draft tube. The numerical simulations were realized using the standard k-e model and a block-structured hexahedral wall function mesh.

  5. Comparison of numerical and experimental results of the flow in the U9 Kaplan turbine model

    International Nuclear Information System (INIS)

    Petit, O; Nilsson, H; Mulu, B; Cervantes, M

    2010-01-01

    The present work compares simulations made using the OpenFOAM CFD code with experimental measurements of the flow in the U9 Kaplan turbine model. Comparisons of the velocity profiles in the spiral casing and in the draft tube are presented. The U9 Kaplan turbine prototype located in Porjus and its model, located in Alvkarleby, Sweden, have curved inlet pipes that lead the flow to the spiral casing. Nowadays, this curved pipe and its effect on the flow in the turbine is not taken into account when numerical simulations are performed at design stage. To study the impact of the inlet pipe curvature on the flow in the turbine, and to get a better overview of the flow of the whole system, measurements were made on the 1:3.1 model of the U9 turbine. Previously published measurements were taken at the inlet of the spiral casing and just before the guide vanes, using the laser Doppler anemometry (LDA) technique. In the draft tube, a number of velocity profiles were measured using the LDA techniques. The present work extends the experimental investigation with a horizontal section at the inlet of the draft tube. The experimental results are used to specify the inlet boundary condition for the numerical simulations in the draft tube, and to validate the computational results in both the spiral casing and the draft tube. The numerical simulations were realized using the standard k-e model and a block-structured hexahedral wall function mesh.

  6. Numerical relativity

    CERN Document Server

    Shibata, Masaru

    2016-01-01

    This book is composed of two parts: First part describes basics in numerical relativity, that is, the formulations and methods for a solution of Einstein's equation and general relativistic matter field equations. This part will be helpful for beginners of numerical relativity who would like to understand the content of numerical relativity and its background. The second part focuses on the application of numerical relativity. A wide variety of scientific numerical results are introduced focusing in particular on the merger of binary neutron stars and black holes.

  7. Numerical analysis

    CERN Document Server

    Khabaza, I M

    1960-01-01

    Numerical Analysis is an elementary introduction to numerical analysis, its applications, limitations, and pitfalls. Methods suitable for digital computers are emphasized, but some desk computations are also described. Topics covered range from the use of digital computers in numerical work to errors in computations using desk machines, finite difference methods, and numerical solution of ordinary differential equations. This book is comprised of eight chapters and begins with an overview of the importance of digital computers in numerical analysis, followed by a discussion on errors in comput

  8. Direct Numerical Simulations of Rayleigh-Taylor instability

    International Nuclear Information System (INIS)

    Livescu, D; Wei, T; Petersen, M R

    2011-01-01

    The development of the Rayleigh-Taylor mixing layer is studied using data from an extensive new set of Direct Numerical Simulations (DNS), performed on the 0.5 Petaflops, 150k compute cores BG/L Dawn supercomputer at Lawrence Livermore National Laboratory. This includes a suite of simulations with grid size of 1024 2 × 4608 and Atwood number ranging from 0.04 to 0.9, in order to examine small departures from the Boussinesq approximation as well as large Atwood number effects, and a high resolution simulation of grid size 4096 2 × 4032 and Atwood number of 0.75. After the layer width had developed substantially, additional branched simulations have been run under reversed and zero gravity conditions. While the bulk of the results will be published elsewhere, here we present preliminary results on: 1) the long-standing open question regarding the discrepancy between the numerically and experimentally measured mixing layer growth rates and 2) mixing characteristics.

  9. Structured P2P overlay of mobile brokers for realizing publish/subscribe communication in VANET.

    Science.gov (United States)

    Pandey, Tulika; Garg, Deepak; Gore, Manoj Madhava

    2014-01-01

    Publish/subscribe communication paradigm provides asynchrony and decoupling, making it an elegant alternative for designing applications in distributed and dynamic environment such as vehicular ad hoc networks (VANETs). In this paradigm, the broker is the most important component that decouples other two components, namely, publisher and subscriber. Previous research efforts have either utilized the deployment of distributed brokers on stationary road side info-stations or have assigned the role of broker to any moving vehicle on ad hoc basis. In one approach, lots of preinstalled infrastructures are needed whereas, in another, the quality of service is not guaranteed due to unpredictable moving and stopping patterns of vehicles. In this paper, we present the architecture of distributed mobile brokers which are dynamically reconfigurable in the form of structured P2P overlay and act as rendezvous points for matching publications and subscriptions. We have taken city buses in urban settings to act as mobile brokers whereas other vehicles are considered to be in role of publishers and subscribers. These mobile brokers also assist in locating a vehicle for successful and timely transfer of notifications. We have performed an extensive simulation study to compare our approach with previously proposed approaches. Simulation results establish the applicability of our approach.

  10. Structured P2P Overlay of Mobile Brokers for Realizing Publish/Subscribe Communication in VANET

    Directory of Open Access Journals (Sweden)

    Tulika Pandey

    2014-01-01

    Full Text Available Publish/subscribe communication paradigm provides asynchrony and decoupling, making it an elegant alternative for designing applications in distributed and dynamic environment such as vehicular ad hoc networks (VANETs. In this paradigm, the broker is the most important component that decouples other two components, namely, publisher and subscriber. Previous research efforts have either utilized the deployment of distributed brokers on stationary road side info-stations or have assigned the role of broker to any moving vehicle on ad hoc basis. In one approach, lots of preinstalled infrastructures are needed whereas, in another, the quality of service is not guaranteed due to unpredictable moving and stopping patterns of vehicles. In this paper, we present the architecture of distributed mobile brokers which are dynamically reconfigurable in the form of structured P2P overlay and act as rendezvous points for matching publications and subscriptions. We have taken city buses in urban settings to act as mobile brokers whereas other vehicles are considered to be in role of publishers and subscribers. These mobile brokers also assist in locating a vehicle for successful and timely transfer of notifications. We have performed an extensive simulation study to compare our approach with previously proposed approaches. Simulation results establish the applicability of our approach.

  11. The Recidivism Patterns of Previously Deported Aliens Released from a Local Jail: Are They High-Risk Offenders?

    Science.gov (United States)

    Hickman, Laura J.; Suttorp, Marika J.

    2010-01-01

    Previously deported aliens are a group about which numerous claims are made but very few facts are known. Using data on male deportable aliens released from a local jail, the study sought to test the ubiquitous claim that they pose a high risk of recidivism. Using multiple measures of recidivism and propensity score weighting to account for…

  12. Hartree-Fock-Bogoliubov model: a theoretical and numerical perspective

    International Nuclear Information System (INIS)

    Paul, S.

    2012-01-01

    This work is devoted to the theoretical and numerical study of Hartree-Fock-Bogoliubov (HFB) theory for attractive quantum systems, which is one of the main methods in nuclear physics. We first present the model and its main properties, and then explain how to get numerical solutions. We prove some convergence results, in particular for the simple fixed point algorithm (sometimes called Roothaan). We show that it converges, or oscillates between two states, none of them being a solution. This generalizes to the HFB case previous results of Cances and Le Bris for the simpler Hartree-Fock model in the repulsive case. Following these authors, we also propose a relaxed constraint algorithm for which convergence is guaranteed. In the last part of the thesis, we illustrate the behavior of these algorithms by some numerical experiments. We first consider a system where the particles only interact through the Newton potential. Our numerical results show that the pairing matrix never vanishes, a fact that has not yet been proved rigorously. We then study a very simplified model for protons and neutrons in a nucleus. (author)

  13. The Community Publishing Project: assisting writers to self-publish ...

    African Journals Online (AJOL)

    This article examines the need for a small project such as the Community Publishing Project in South Africa and explores its aims. The method of involving writers and community groups in the publication process is described and two completed projects are evaluated. Lessons learnt by the Centre for the Book in managing ...

  14. Academic Publishing: Making the Implicit Explicit

    Directory of Open Access Journals (Sweden)

    Cecile Badenhorst

    2016-07-01

    Full Text Available For doctoral students, publishing in peer-reviewed journals is a task many face with anxiety and trepidation. The world of publishing, from choosing a journal, negotiating with editors and navigating reviewers’ responses is a bewildering place. Looking in from the outside, it seems that successful and productive academic writers have knowledge that is inaccessible to novice scholars. While there is a growing literature on writing for scholarly publication, many of these publications promote writing and publishing as a straightforward activity that anyone can achieve if they follow the rules. We argue that the specific and situated contexts in which academic writers negotiate publishing practices is more complicated and messy. In this paper, we attempt to make explicit our publishing processes to highlight the complex nature of publishing. We use autoethnographic narratives to provide discussion points and insights into the challenges of publishing peer reviewed articles. One narrative is by a doctoral student at the beginning of her publishing career, who expresses her desires, concerns and anxieties about writing for publication. The other narrative focuses on the publishing practices of a more experienced academic writer. Both are international scholars working in the Canadian context. The purpose of this paper is to explore academic publishing through the juxtaposition of these two narratives to make explicit some of the more implicit processes. Four themes emerge from these narratives. To publish successfully, academic writers need: (1 to be discourse analysts; (2 to have a critical competence; (3 to have writing fluency; and (4 to be emotionally intelligent.

  15. THE TYPES OF PUBLISHING SLOGANS

    Directory of Open Access Journals (Sweden)

    Ryzhov Konstantin Germanovich

    2015-03-01

    Full Text Available The author of the article focuses his attention on publishing slogans which are posted on 100 present-day Russian publishing houses' official websites and have not yet been studied in the special literature. The author has developed his own classification of publishing slogans based on the results of analysis and considering the current scientific views on the classification of slogans. The examined items are classified into autonomous and text-dependent according to interrelationship with an advertising text; marketable, corporative and mixed according to a presentation subject; rational, emotional and complex depending on the method of influence upon a recipient; slogan-presentation, slogan-assurance, slogan-identifier, slogan-appraisal, slogan-appeal depending on the communicative strategy; slogans consisting of one sentence and of two or more sentences; Russian and foreign ones. The analysis of the slogans of all kinds presented in the actual material allowed the author to determine the dominant features of the Russian publishing slogan which is an autonomous sentence in relation to the advertising text. In spite of that, the slogan shows the publishing output, influences the recipient emotionally, actualizes the communicative strategy of publishing house presentation of its distinguishing features, gives assurance to the target audience and distinguishes the advertised subject among competitors.

  16. Self-Published Books: An Empirical "Snapshot"

    Science.gov (United States)

    Bradley, Jana; Fulton, Bruce; Helm, Marlene

    2012-01-01

    The number of books published by authors using fee-based publication services, such as Lulu and AuthorHouse, is overtaking the number of books published by mainstream publishers, according to Bowker's 2009 annual data. Little empirical research exists on self-published books. This article presents the results of an investigation of a random sample…

  17. QlikView Server and Publisher

    CERN Document Server

    Redmond, Stephen

    2014-01-01

    This is a comprehensive guide with a step-by-step approach that enables you to host and manage servers using QlikView Server and QlikView Publisher.If you are a server administrator wanting to learn about how to deploy QlikView Server for server management,analysis and testing, and QlikView Publisher for publishing of business content then this is the perfect book for you. No prior experience with QlikView is expected.

  18. Information Management: Publishing and Printing: Army Publishing: Action Officers Guide

    Science.gov (United States)

    2002-04-30

    types of lists: ordered (such as numerical, alphabetical, or sequential ), bulleted, or dashed. (4) Extracted material in an appendix must be identified...provide supporting, expanded, or sequential doctrinal manuals within a functional field (this number group must not exceed 3 digits). Table 13–2...rubup, opaquing, lineup , and register, and so forth 1,2 190 DA PAM 25–40 • 30 April 2002 Table J–5 Camera, platemaking, and related equipment—Continued

  19. Peer-review: An IOP Publishing Perspective

    Science.gov (United States)

    Smith, Timothy

    2015-03-01

    Online publishing is challenging, and potentially changing, the role of publishers in both managing the peer-review process and disseminating the work that they publish in meeting contrasting needs from diverse groups of research communities. Recognizing the value of peer-review as a fundamental service to authors and the research community, the underlying principles of managing the process for journals published by IOP Publishing remain unchanged and yet the potential and demand for alternative models exists. This talk will discuss the traditional approach to peer-review placed in the context of this changing demand.

  20. Perception of Key Barriers in Using and Publishing Open Data

    Directory of Open Access Journals (Sweden)

    Martin Beno

    2017-12-01

    Full Text Available TThere is a growing body of literature recognizing the benefits of Open Data. However, many potential data providers are unwilling to publish their data and at the same time, data users are often faced with difficulties when attempting to use Open Data in practice. Despite various barriers in using and publishing Open Data still being present, studies which systematically collect and assess these barriers are rare. Based on this observation we present a review on prior literature on barriers and the results of an empirical study aimed at assessing both the users’ and publishers’ views on obstacles regarding Open Data adoption. We collected data with an online survey in Austria and internationally. Using a sample of 183 participants, we draw conclusions about the relative importance of the barriers reported in the literature. In comparison to a previous conference paper presented at the conference for E-Democracy and Open Government, this article includes new additional data from participants outside Austria, reports new analyses, and substantially extends the discussion of results and of possible strategies for the mitigation of Open Data barriers.

  1. Pushing the Quality Level in Networked News Business: Semantic-Based Content Retrieval and Composition in International News Publishing

    OpenAIRE

    M.W. Schranz

    2006-01-01

    Electronic publishing exploits numerous possibilities to present or exchange information and to communicate via most current media like the Internet. By utilizing modern Web technologies like Web Services, loosely coupled services, and peer-to-peer networks we describe the integration of an intelligent business news presentation and distribution network. Employing semantics technologies enables the coupling of multinational and multilingual business news data on a scaleable international leve...

  2. Methodological Quality of Systematic Reviews Published in the Urological Literature from 1998 to 2012.

    Science.gov (United States)

    Corbyons, Katherine; Han, Julia; Neuberger, Molly M; Dahm, Philipp

    2015-11-01

    Systematic reviews synthesize the current best evidence to address a clinical question. Given the growing emphasis on evidence-based clinical practice, systematic reviews are being increasingly sought after and published. We previously reported limitations in the methodological quality of 57 individual systematic reviews published from 1998 to 2008. We provide an update to our previous study, adding systematic reviews published from 2009 to 2012. We systematically searched PubMed® and hand searched the table of contents of 4 major urological journals to identify systematic reviews related to questions of prevention and therapy. Two independent reviewers with prior formal evidence-based medicine training assessed the methodological quality using the validated 11-point AMSTAR (A Measurement Tool to Assess Systematic Reviews) instrument. We performed predefined statistical hypothesis testing for differences by publication period (1998 to 2008 vs 2009 to 2012) and journal of publication. We performed statistical testing using SPSS®, version 23.0 with a 2-sided α of 0.05 using the Student t-test, ANOVA and the chi-square test. A total of 113 systematic reviews published from 2009 to 2012 met study inclusion criteria. The most common topics were oncology (44 reviews or 38.9%), voiding dysfunction (26 or 23.0%) and stones/endourology (13 or 11.5%). The largest contributor was European Urology (46 reviews or 40.7%), followed by BJU International (31 or 27.4%) and The Journal of Urology® (22 or 19.5%). The mean ± SD AMSTAR score for the 2009 to 2012 period was 5.3 ± 2.3 compared to 4.8 ± 2.0 for 1998 to 2008 with a mean difference of 0.5 (95% CI 0.2 to 1.2, p = 0.133). While the number of systematic reviews published in the urological literature has increased substantially, the methodological quality of these studies remains suboptimal. Systematic review authors and editors should make every effort to adhere to well established methodological standards to enhance

  3. From protocol to published report

    DEFF Research Database (Denmark)

    Berendt, Louise; Callréus, Torbjörn; Petersen, Lene Grejs

    2016-01-01

    and published reports of academic clinical drug trials. METHODS: A comparison was made between study protocols and their corresponding published reports. We assessed the overall consistency, which was defined as the absence of discrepancy regarding study type (categorized as either exploratory or confirmatory...... in 1999, 2001, and 2003, 95 of which fulfilled the eligibility criteria and had at least one corresponding published report reporting data on trial subjects. Overall consistency was observed in 39% of the trials (95% CI: 29 to 49%). Randomized controlled trials (RCTs) constituted 72% (95% CI: 63 to 81......%) of the sample, and 87% (95% CI: 80 to 94%) of the trials were hospital based. CONCLUSIONS: Overall consistency between protocols and their corresponding published reports was low. Motivators for the inconsistencies are unknown but do not seem restricted to economic incentives....

  4. Types of Open Access Publishers in Scopus

    Directory of Open Access Journals (Sweden)

    David Solomon

    2013-05-01

    Full Text Available This study assessed characteristics of publishers who published 2010 open access (OA journals indexed in Scopus. Publishers were categorized into six types; professional, society, university, scholar/researcher, government, and other organizations. Type of publisher was broken down by number of journals/articles published in 2010, funding model, location, discipline and whether the journal was born or converted to OA. Universities and societies accounted for 50% of the journals and 43% of the articles published. Professional publisher accounted for a third of the journals and 42% of the articles. With the exception of professional and scholar/researcher publishers, most journals were originally subscription journals that made at least their digital version freely available. Arts, humanities and social science journals are largely published by societies and universities outside the major publishing countries. Professional OA publishing is most common in biomedicine, mathematics, the sciences and engineering. Approximately a quarter of the journals are hosted on national/international platforms, in Latin America, Eastern Europe and Asia largely published by universities and societies without the need for publishing fees. This type of collaboration between governments, universities and/or societies may be an effective means of expanding open access publications.

  5. Choosing the Right Desktop Publisher.

    Science.gov (United States)

    Eiser, Leslie

    1988-01-01

    Investigates the many different desktop publishing packages available today. Lists the steps to desktop publishing. Suggests which package to use with specific hardware available. Compares several packages for IBM, Mac, and Apple II based systems. (MVL)

  6. Numerical modeling of optical coherent transient processes with complex configurations-III: Noisy laser source

    International Nuclear Information System (INIS)

    Chang Tiejun; Tian Mingzhen

    2007-01-01

    A previously developed numerical model based on Maxwell-Bloch equations was modified to simulate optical coherent transient and spectral hole burning processes with noisy laser sources. Random walk phase noise was simulated using laser-phase sequences generated numerically according to the normal distribution of the phase shift. The noise model was tested by comparing the simulated spectral hole burning effect with the analytical solution. The noise effects on a few typical optical coherence transient processes were investigated using this numerical tool. Flicker and random walk frequency noises were considered in accumulation process

  7. Numerical simulation of heat exchangers elliptical tubes and corrugated fins

    International Nuclear Information System (INIS)

    Borrajo Pérez, Rubén; González Bayón, Juan José; Menéndez Pérez, Alberto

    2015-01-01

    The intensified heat exchangers fins are widely used in the automotive and domestic industry. The low heat transfer coefficients on the air side are the main reason why these fins of heat exchangers need to be intensified. In this paper, the numerical simulation of a wavy fin type is made with elliptical tubes. The dimensions of the fin is in the range of those used in air conditioning equipment. The friction factor and the mass transfer coefficient as a function of the Reynolds number for this type of fin, always within the laminar regime is determined. The numerical model against experimental results published in the literature is validated. In addition the mechanisms that produce intensified heat transfer fin in such occur. (full text)

  8. Publishing for Learned Societies: The Secret Life of a Scholarly Publisher

    Science.gov (United States)

    Nicholson, David

    Wiley-Blackwell was formed in February 2007 as a result of the acquisition of Blackwell Publishing Ltd. by John Wiley & Sons, Inc. and the merger between Blackwell and Wiley's Scientific, Technical, and Medical business. Wiley-Blackwell publishes approximately 1,250 scholarly peer-reviewed journals including Monthly Notices of the Royal Astronomical Society and Astronomische Nachrichten, and has relationships with over 800 learned societies. The "secret life" of the article's title refers to the two broad areas of activity we undertake for our society partners, namely practical assistance and strategic advice. One of our goals at Wiley-Blackwell is to set the standard for both areas, and this article illustrates how we are doing this with a series of tangible examples.

  9. EDITORIAL: Roberts Prize for the best paper published in 2012 Roberts Prize for the best paper published in 2012

    Science.gov (United States)

    Cherry, Simon; Ruffle, Jon

    2013-08-01

    The publishers of Physics in Medicine and Biology (PMB), IOP Publishing, in association with the journal owners, the Institute of Physics and Engineering in Medicine (IPEM), jointly award the Roberts prize for the best paper published in PMB during the previous year. The procedure for deciding the winner is a two-stage process. First, a shortlist of contenders is drawn up based on those papers that had the best referees' quality assessments, with a further quality check and endorsement by the Editorial Board. The papers on the shortlist are then reviewed by a specially convened IPEM committee consisting of members with fellow status. This committee reads the shortlisted papers and selects the winner. We have much pleasure in advising readers that the Roberts Prize for the best paper published in 2012 is awarded to Michel Defrise, Ahmadreza Rezaei and Johan Nuyts from the Vrije Universiteit Brussels and the Katholieke Universiteit Leuven, Belgium for their breakthrough paper that describes how the information needed for attenuation correction in PET imaging can be extracted, to within a constant, from time-of-flight emission data: Time-of-flight PET data determine the attenuation sinogram up to a constant 2012 Phys. Med. Biol. 57 885 Michel Defrise1, Ahmadreza Rezaei2 and Johan Nuyts2 1Department of Nuclear Medicine, Vrije Universiteit Brussel, B-1090 Brussels, Belgium 2Department of Nuclear Medicine, Katholieke Universiteit Leuven, B-3000 Leuven, Belgium This paper represents an important and timely contribution to the literature as time-of-flight PET scanners are now offered by several manufacturers. In hybrid PET/CT scanners, the PET attenuation correction, necessary for quantitative reconstruction of the tracer distribution, can be derived directly from the CT data. Sometimes, however, the PET and CT scans may be poorly aligned due to patient motion and other approaches are needed. In addition, hybrid PET/MRI scanners also, have been developed recently, and in

  10. The Changing Business of Scholarly Publishing.

    Science.gov (United States)

    Hunter, Karen

    1993-01-01

    Discussion of changes and trends in scholarly publishing highlights monographs; journals; user-centered publishing; electronic products and services, including adding value, marketing strategies, and new pricing systems; changing attitudes regarding copyright; trends in publishing industry reorganization; and impacts on research libraries. (LRW)

  11. Publishing in Open Access Journals

    International Development Research Centre (IDRC) Digital Library (Canada)

    mbrunet

    00054.x). • An ISSN (International Standard Serial Number e.g. 1234-5678) has ... Publisher uses direct and unsolicited marketing (i.e., spamming) or advertising is obtrusive (to publish articles or serve on editorial board). • No information is ...

  12. Electronic Publishing: Baseline Data 1993.

    Science.gov (United States)

    Brock, Laurie

    1993-01-01

    Provides highlights of a report describing research conducted to analyze and compare publishers' and developers' current and planned involvement in electronic publishing. Topics include acceptance of new media, licensing issues, costs and other perceived obstacles, and CD-ROMs platforms. (EAM)

  13. The Book Publishing Industry

    OpenAIRE

    Jean-Paul Simon; Giuditta de Prato

    2012-01-01

    This report offers an in-depth analysis of the major economic developments in the book publishing industry. The analysis integrates data from a statistical report published earlier as part of this project. The report is divided into 4 main parts. Chapter 1, the introduction, puts the sector into an historical perspective. Chapter 2 introduces the markets at a global and regional level; describes some of the major EU markets (France, Germany, Italy, Spain and the United Kingdom). Chapter 3 ana...

  14. Ethics in Scientific Publishing

    Science.gov (United States)

    Sage, Leslie J.

    2012-08-01

    We all learn in elementary school not turn in other people's writing as if it were our own (plagiarism), and in high school science labs not to fake our data. But there are many other practices in scientific publishing that are depressingly common and almost as unethical. At about the 20 percent level authors are deliberately hiding recent work -- by themselves as well as by others -- so as to enhance the apparent novelty of their most recent paper. Some people lie about the dates the data were obtained, to cover up conflicts of interest, or inappropriate use of privileged information. Others will publish the same conference proceeding in multiple volumes, or publish the same result in multiple journals with only trivial additions of data or analysis (self-plagiarism). These shady practices should be roundly condemned and stopped. I will discuss these and other unethical actions I have seen over the years, and steps editors are taking to stop them.

  15. Numerical Solution of Stokes Flow in a Circular Cavity Using Mesh-free Local RBF-DQ

    DEFF Research Database (Denmark)

    Kutanaai, S Soleimani; Roshan, Naeem; Vosoughi, A

    2012-01-01

    This work reports the results of a numerical investigation of Stokes flow problem in a circular cavity as an irregular geometry using mesh-free local radial basis function-based differential quadrature (RBF-DQ) method. This method is the combination of differential quadrature approximation of der...... in solution of partial differential equations (PDEs).......This work reports the results of a numerical investigation of Stokes flow problem in a circular cavity as an irregular geometry using mesh-free local radial basis function-based differential quadrature (RBF-DQ) method. This method is the combination of differential quadrature approximation...... is applied on a two-dimensional geometry. The obtained results from the numerical simulations are compared with those gained by previous works. Outcomes prove that the current technique is in very good agreement with previous investigations and this fact that RBF-DQ method is an accurate and flexible method...

  16. Mathematical and numerical modeling of early atherosclerotic lesions***

    Directory of Open Access Journals (Sweden)

    Raoult Annie

    2010-12-01

    Full Text Available This article is devoted to the construction of a mathematical model describing the early formation of atherosclerotic lesions. The early stage of atherosclerosis is an inflammatory process that starts with the penetration of low density lipoproteins in the intima and with their oxidation. This phenomenon is closely linked to the local blood flow dynamics. Extending a previous work [5] that was mainly restricted to a one-dimensional setting, we couple a simple lesion growth model relying on the biomolecular process that takes place in the intima with blood flow dynamics and mass transfer. We perform numerical simulations on a two-dimensional geometry taken from [6,7] that mimicks a carotid artery deformed by a perivascular cast and we compare the numerical results with experimental data.

  17. Symbolic-Numeric Integration of the Dynamical Cosserat Equations

    KAUST Repository

    Lyakhov, Dmitry A.

    2017-08-29

    We devise a symbolic-numeric approach to the integration of the dynamical part of the Cosserat equations, a system of nonlinear partial differential equations describing the mechanical behavior of slender structures, like fibers and rods. This is based on our previous results on the construction of a closed form general solution to the kinematic part of the Cosserat system. Our approach combines methods of numerical exponential integration and symbolic integration of the intermediate system of nonlinear ordinary differential equations describing the dynamics of one of the arbitrary vector-functions in the general solution of the kinematic part in terms of the module of the twist vector-function. We present an experimental comparison with the well-established generalized \\\\alpha -method illustrating the computational efficiency of our approach for problems in structural mechanics.

  18. Symbolic-Numeric Integration of the Dynamical Cosserat Equations

    KAUST Repository

    Lyakhov, Dmitry A.; Gerdt, Vladimir P.; Weber, Andreas G.; Michels, Dominik L.

    2017-01-01

    We devise a symbolic-numeric approach to the integration of the dynamical part of the Cosserat equations, a system of nonlinear partial differential equations describing the mechanical behavior of slender structures, like fibers and rods. This is based on our previous results on the construction of a closed form general solution to the kinematic part of the Cosserat system. Our approach combines methods of numerical exponential integration and symbolic integration of the intermediate system of nonlinear ordinary differential equations describing the dynamics of one of the arbitrary vector-functions in the general solution of the kinematic part in terms of the module of the twist vector-function. We present an experimental comparison with the well-established generalized \\alpha -method illustrating the computational efficiency of our approach for problems in structural mechanics.

  19. Evaluation of wave runup predictions from numerical and parametric models

    Science.gov (United States)

    Stockdon, Hilary F.; Thompson, David M.; Plant, Nathaniel G.; Long, Joseph W.

    2014-01-01

    Wave runup during storms is a primary driver of coastal evolution, including shoreline and dune erosion and barrier island overwash. Runup and its components, setup and swash, can be predicted from a parameterized model that was developed by comparing runup observations to offshore wave height, wave period, and local beach slope. Because observations during extreme storms are often unavailable, a numerical model is used to simulate the storm-driven runup to compare to the parameterized model and then develop an approach to improve the accuracy of the parameterization. Numerically simulated and parameterized runup were compared to observations to evaluate model accuracies. The analysis demonstrated that setup was accurately predicted by both the parameterized model and numerical simulations. Infragravity swash heights were most accurately predicted by the parameterized model. The numerical model suffered from bias and gain errors that depended on whether a one-dimensional or two-dimensional spatial domain was used. Nonetheless, all of the predictions were significantly correlated to the observations, implying that the systematic errors can be corrected. The numerical simulations did not resolve the incident-band swash motions, as expected, and the parameterized model performed best at predicting incident-band swash heights. An assimilated prediction using a weighted average of the parameterized model and the numerical simulations resulted in a reduction in prediction error variance. Finally, the numerical simulations were extended to include storm conditions that have not been previously observed. These results indicated that the parameterized predictions of setup may need modification for extreme conditions; numerical simulations can be used to extend the validity of the parameterized predictions of infragravity swash; and numerical simulations systematically underpredict incident swash, which is relatively unimportant under extreme conditions.

  20. Intentional and Automatic Numerical Processing as Predictors of Mathematical Abilities in Primary School Children

    Directory of Open Access Journals (Sweden)

    Violeta ePina

    2015-03-01

    Full Text Available Previous studies have suggested that numerical processing relates to mathematical performance, but it seems that such relationship is more evident for intentional than for automatic numerical processing. In the present study we assessed the relationship between the two types of numerical processing and specific mathematical abilities in a sample of 109 children in grades 1 to 6. Participants were tested in an ample range of mathematical tests and also performed both a numerical and a size comparison task. The results showed that numerical processing related to mathematical performance only when inhibitory control was involved in the comparison tasks. Concretely, we found that intentional numerical processing, as indexed by the numerical distance effect in the numerical comparison task, was related to mathematical reasoning skills only when the task-irrelevant dimension (the physical size was incongruent; whereas automatic numerical processing, indexed by the congruency effect in the size comparison task, was related to mathematical calculation skills only when digits were separated by small distance. The observed double dissociation highlights the relevance of both intentional and automatic numerical processing in mathematical skills, but when inhibitory control is also involved.

  1. Detailed numerical modeling of a linear parallel-plate Active Magnetic Regenerator

    DEFF Research Database (Denmark)

    Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden; Smith, Anders

    2009-01-01

    A numerical model simulating Active Magnetic Regeneration (AMR) is presented and compared to a selection of experiments. The model is an extension and re-implementation of a previous two-dimensional model. The new model is extended to 2.5D, meaning that parasitic thermal losses are included...

  2. Basics of Desktop Publishing. Second Edition.

    Science.gov (United States)

    Beeby, Ellen; Crummett, Jerrie

    This document contains teacher and student materials for a basic course in desktop publishing. Six units of instruction cover the following: (1) introduction to desktop publishing; (2) desktop publishing systems; (3) software; (4) type selection; (5) document design; and (6) layout. The teacher edition contains some or all of the following…

  3. The Decision to Publish Electronically.

    Science.gov (United States)

    Craig, Gary

    1983-01-01

    Argues that decision to publish a given intellectual product "electronically" is a business decision based on customer needs, available format alternatives, current business climate, and variety of already existing factors. Publishers are most influenced by customers' acceptance of new products and their own role as intermediaries in…

  4. The Evolution of Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1995-01-01

    Discusses the evolution of electronic publishing from the early 1960s when computers were used merely to produce conventional printed products to the present move toward networked scholarly publishing. Highlights include library development, periodicals on the Internet, online journals versus paper journals, problems, and the future of…

  5. Numerical simulation methods of fires in nuclear power plants

    International Nuclear Information System (INIS)

    Keski-Rahkonen, O.; Bjoerkman, J.; Heikkilae, L.

    1992-01-01

    Fire is a significant hazard to the safety of nuclear power plants (NPP). Fire may be serious accident as such, but even small fire at a critical point in a NPP may cause an accident much more serious than fire itself. According to risk assessments a fire may be an initial cause or a contributing factor in a large part of reactor accidents. At the Fire Technology and the the Nuclear Engineering Laboratory of the Technical Research Centre of Finland (VTT) fire safety research for NPPs has been carried out in a large extent since 1985. During years 1988-92 a project Advanced Numerical Modelling in Nuclear Power Plants (PALOME) was carried out. In the project the level of numerical modelling for fire research in Finland was improved by acquiring, preparing for use and developing numerical fire simulation programs. Large scale test data of the German experimental program (PHDR Sicherheitsprogramm in Kernforschungscentral Karlsruhe) has been as reference. The large scale tests were simulated by numerical codes and results were compared to calculations carried out by others. Scientific interaction with outstanding foreign laboratories and scientists has been an important part of the project. This report describes the work of PALOME-project carried out at the Fire Technology Laboratory only. A report on the work at the Nuclear Engineering Laboratory will be published separatively. (au)

  6. Operator theory and numerical methods

    CERN Document Server

    Fujita, H; Suzuki, T

    2001-01-01

    In accordance with the developments in computation, theoretical studies on numerical schemes are now fruitful and highly needed. In 1991 an article on the finite element method applied to evolutionary problems was published. Following the method, basically this book studies various schemes from operator theoretical points of view. Many parts are devoted to the finite element method, but other schemes and problems (charge simulation method, domain decomposition method, nonlinear problems, and so forth) are also discussed, motivated by the observation that practically useful schemes have fine mathematical structures and the converses are also true. This book has the following chapters: 1. Boundary Value Problems and FEM. 2. Semigroup Theory and FEM. 3. Evolution Equations and FEM. 4. Other Methods in Time Discretization. 5. Other Methods in Space Discretization. 6. Nonlinear Problems. 7. Domain Decomposition Method.

  7. Exploring Digital News Publishing Business Models

    DEFF Research Database (Denmark)

    Lindskow, Kasper

    News publishers in the industrialized world are experiencing a fundamental challenge to their business models because of the changing modes of consumption, competition, and production of their offerings that are associated with the emergence of the networked information society. The erosion...... of the traditional business models poses an existential threat to news publishing and has given rise to a continuing struggle among news publishers to design digital business models that will be sustainable in the future. This dissertation argues that a central and underresearched aspect of digital news publishing...... business models concerns the production networks that support the co-production of digital news offerings. To fill this knowledge gap, this dissertation explores the strategic design of the digital news publishing production networks that are associated with HTML-based news offerings on the open Web...

  8. Leiomyosarcoma of the Prostate: Case Report and Review of 54 Previously Published Cases

    Directory of Open Access Journals (Sweden)

    Gerasimos P. Vandoros

    2008-01-01

    Full Text Available Prostate leiomyosarcoma is an extremely rare and highly aggressive neoplasm that accounts for less than 0.1% of primary prostate malignancies. We present a patient with primary leiomyosarcoma of the prostate and review 54 cases reported in the literature to discuss the clinical, diagnostic and therapeutic aspects of this uncommon tumor. Median survival was estimated at 17 months (95% C.I. 20.7–43.7 months and the 1-, 3-, and 5-year actuarial survival rates were 68%, 34%, and 26%, respectively. The only factors predictive of long-term survival were negative surgical margins and absence of metastatic disease at presentation. A multidisciplinary approach is necessary for appropriate management of this dire entity.

  9. Implementation and management of e-marketing in the Croatian publishing industry

    Directory of Open Access Journals (Sweden)

    Gordana Dukić

    2010-07-01

    Croatian publishers have a web site. Respondents stated that their sites were mostly registered with the search engines and that they were regularly updated. There are also a significant number of companies offering on-line purchase of products. Although the proportion of companies using at least some form of e-marketing is rather large, simpler methods of advertising and establishing contact with customers are in the majority.On average, interviewed marketing staff evaluated their knowledge of e-marketing as good. Based on the obtained results, the authors have concluded that, with the exception of individual cases, Croatian publishers have not yet fully recognised the importance and possibilities of e-marketing. Arguing that there are numerous obstacles to its full implementation in the publishing business, respondents do not agree that thorough changes are needed in the way they conduct marketing activities, although they are increasingly using e-marketing in their operations. It is likely that this attitude is largely the result of their belief that Croatian population is insufficiently skilled in using information and communication technology and an opinion that e-marketing is not more efficient than traditional marketing. The authors have concluded that, in terms of characteristics used for their categorisation, marketing staff have a rather uniform attitude towards e-marketing.Research study whose results have been presented in this paper contributes to a better understanding of various aspects of the use of e-marketing in the publishing trade. As such, it can be used to improve e-marketing management, thereby improving overall performance, which represents its most important merit.

  10. ESTABLISHING A PUBLISHING OUTFIT IN NIGERIA EMENYONU ...

    African Journals Online (AJOL)

    CIU

    stakeholders in the publishing industry,the legal environment of publishing, ... retailers. Publishing is a peculiar form of business for which a special group of very .... The publisher should provide furniture and fittings for the staff and intended ...

  11. Numerical analysis

    CERN Document Server

    Rao, G Shanker

    2006-01-01

    About the Book: This book provides an introduction to Numerical Analysis for the students of Mathematics and Engineering. The book is designed in accordance with the common core syllabus of Numerical Analysis of Universities of Andhra Pradesh and also the syllabus prescribed in most of the Indian Universities. Salient features: Approximate and Numerical Solutions of Algebraic and Transcendental Equation Interpolation of Functions Numerical Differentiation and Integration and Numerical Solution of Ordinary Differential Equations The last three chapters deal with Curve Fitting, Eigen Values and Eigen Vectors of a Matrix and Regression Analysis. Each chapter is supplemented with a number of worked-out examples as well as number of problems to be solved by the students. This would help in the better understanding of the subject. Contents: Errors Solution of Algebraic and Transcendental Equations Finite Differences Interpolation with Equal Intervals Interpolation with Unequal Int...

  12. Decentralized provenance-aware publishing with nanopublications

    Directory of Open Access Journals (Sweden)

    Tobias Kuhn

    2016-08-01

    Full Text Available Publication and archival of scientific results is still commonly considered the responsability of classical publishing companies. Classical forms of publishing, however, which center around printed narrative articles, no longer seem well-suited in the digital age. In particular, there exist currently no efficient, reliable, and agreed-upon methods for publishing scientific datasets, which have become increasingly important for science. In this article, we propose to design scientific data publishing as a web-based bottom-up process, without top-down control of central authorities such as publishing companies. Based on a novel combination of existing concepts and technologies, we present a server network to decentrally store and archive data in the form of nanopublications, an RDF-based format to represent scientific data. We show how this approach allows researchers to publish, retrieve, verify, and recombine datasets of nanopublications in a reliable and trustworthy manner, and we argue that this architecture could be used as a low-level data publication layer to serve the Semantic Web in general. Our evaluation of the current network shows that this system is efficient and reliable.

  13. MUCH Electronic Publishing Environment: Principles and Practices.

    Science.gov (United States)

    Min, Zheng; Rada, Roy

    1994-01-01

    Discusses the electronic publishing system called Many Using and Creating Hypermedia (MUCH). The MUCH system supports collaborative authoring; reuse; formatting and printing; management; hypermedia publishing and delivery; and interchange. This article examines electronic publishing environments; the MUCH environment; publishing activities; and…

  14. Computational Enhancements for Direct Numerical Simulations of Statistically Stationary Turbulent Premixed Flames

    KAUST Repository

    Mukhadiyev, Nurzhan

    2017-05-01

    Combustion at extreme conditions, such as a turbulent flame at high Karlovitz and Reynolds numbers, is still a vast and an uncertain field for researchers. Direct numerical simulation of a turbulent flame is a superior tool to unravel detailed information that is not accessible to most sophisticated state-of-the-art experiments. However, the computational cost of such simulations remains a challenge even for modern supercomputers, as the physical size, the level of turbulence intensity, and chemical complexities of the problems continue to increase. As a result, there is a strong demand for computational cost reduction methods as well as in acceleration of existing methods. The main scope of this work was the development of computational and numerical tools for high-fidelity direct numerical simulations of premixed planar flames interacting with turbulence. The first part of this work was KAUST Adaptive Reacting Flow Solver (KARFS) development. KARFS is a high order compressible reacting flow solver using detailed chemical kinetics mechanism; it is capable to run on various types of heterogeneous computational architectures. In this work, it was shown that KARFS is capable of running efficiently on both CPU and GPU. The second part of this work was numerical tools for direct numerical simulations of planar premixed flames: such as linear turbulence forcing and dynamic inlet control. DNS of premixed turbulent flames conducted previously injected velocity fluctuations at an inlet. Turbulence injected at the inlet decayed significantly while reaching the flame, which created a necessity to inject higher than needed fluctuations. A solution for this issue was to maintain turbulence strength on the way to the flame using turbulence forcing. Therefore, a linear turbulence forcing was implemented into KARFS to enhance turbulence intensity. Linear turbulence forcing developed previously by other groups was corrected with net added momentum removal mechanism to prevent mean

  15. Numerical simulation of spin motion in circular accelerators using spinor formulation

    International Nuclear Information System (INIS)

    Nghiem, P.; Tkatchenko, A.

    1992-07-01

    A simple method is presented based on spinor algebra formalism for tracking the spin motion in circular accelerators. Using an analytical expression of the one-turn transformation matrix including the effects of perturbating fields or of siberian snakes, a simple and very fast numerical code has been written for studying spin motion in various circumstances. In particular, effects of synchrotron oscillations on final polarization after one isolated resonance crossing are simulated. Results of these calculations agree very well with those which have been obtained previously from analytical approaches or from other numerical-simulation programs. (author) 8 refs.; 14 figs

  16. Desktop Publishing in the University.

    Science.gov (United States)

    Burstyn, Joan N., Ed.

    Highlighting changes in the work of people within the university, this book presents nine essays that examine the effects of desktop publishing and electronic publishing on professors and students, librarians, and those who work at university presses and in publication departments. Essays in the book are: (1) "Introduction: The Promise of Desktop…

  17. Web Publishing Schedule

    Science.gov (United States)

    Section 207(f)(2) of the E-Gov Act requires federal agencies to develop an inventory and establish a schedule of information to be published on their Web sites, make those schedules available for public comment. To post the schedules on the web site.

  18. Count on dopamine: influences of COMT polymorphisms on numerical cognition

    Directory of Open Access Journals (Sweden)

    Annelise eJúlio-Costa

    2013-08-01

    Full Text Available Catechol-O-methyltransferase (COMT is an enzyme that is particularly important for the metabolism of dopamine. Functional polymorphisms of COMT have been implicated in working memory and numerical cognition. This is an exploratory study that aims at investigating associations between COMT polymorphisms, working memory and numerical cognition. Elementary school children from 2th to 6th grades were divided into two groups according to their COMT val158met polymorphism (homozygous for valine allele [n= 61] versus heterozygous plus methionine homozygous children or met+ group [n=94]. Both groups were matched for age and intelligence. Working memory was assessed through digit span and Corsi blocks. Symbolic numerical processing was assessed through transcoding and single-digit word problem tasks. Non-symbolic magnitude comparison and estimation tasks were used to assess number sense. Between-group differences were found in symbolic and non-symbolic numerical tasks, but not in working memory tasks. Children in the met+ group showed better performance in all numerical tasks while val homozygous children presented slower development of non-symbolic magnitude representations. These results suggest COMT-related dopaminergic modulation may be related not only to working memory, as found in previous studies, but also to the development of magnitude processing and magnitude representations.

  19. Desktop Publishing Choices: Making an Appropriate Decision.

    Science.gov (United States)

    Crawford, Walt

    1991-01-01

    Discusses various choices available for desktop publishing systems. Four categories of software are described, including advanced word processing, graphics software, low-end desktop publishing, and mainstream desktop publishing; appropriate hardware is considered; and selection guidelines are offered, including current and future publishing needs,…

  20. The numerical solution of ICRF fields in axisymmetric mirrors

    International Nuclear Information System (INIS)

    Phillips, M.W.; Todd, A.M.M.

    1986-01-01

    The numerics of a numerical code called GARFIELD (Grumman Aerospace RF fIELD code) designed to calculate the three-dimensional structure of ICRF fields in axisymmetric mirrors is presented. The code solves the electromagnetic wave equation for the electric field using a cold plasma dispersion relation with a small collision term to simulate absorption. The full wave solution including E.B is computed. The fields are Fourier analyzed in the poloidal direction and solved on a grid in the axial and radial directions. A two-dimensional equilibrium can be used as the source of equilibrium data. This allows us to extend previous studies of ICRF wave propagation and absorption in mirrors to include the effect of axial variation of the magnetic field and density. (orig.)

  1. Combustion Behaviour of Pulverised Wood - Numerical and Experimental Studies. Part 1 Numerical Study

    Energy Technology Data Exchange (ETDEWEB)

    Elfasakhany, A.; Xue-Song Bai [Lund Inst. of Tech. (Sweden). Dept. of Heat and Power Engineering

    2002-12-01

    This report describes a theoretical/numerical investigation of the particle motion and the particle drying, pyrolysis, oxidation of volatile and char in a pulverised biofuel (wood) flame. This work, along with the experimental measurement of a pulverised wood flame in a vertical furnace at TPS, is supported by the Swedish Energy Agency, STEM. The fundamental combustion process of a pulverised wood flame with determined size distribution and anisotropy character is studied. Comprehensive submodels are studied and some models not available in the literature are developed. The submodels are integrated to a CFD code, previously developed at LTH. The numerical code is used to simulate the experimental flame carried out at TPS (as sub-task 2 within the project). The sub-models describe the drying, devolatilization, char formation of wood particles, and the oxidation reaction of char and the gas phase volatile. At the present stage, the attention is focused on the understanding and modelling of non-spherical particle dynamics and the drying, pyrolysis, and oxidation of volatile and char. Validation of the sub-models against the experimental data is presented and discussed in this study. The influence of different factors on the pulverised wood flame in the TPS vertical furnace is investigated. This includes shape of the particles, the effect of volatile release, as well as the orientation of the particles on the motion of the particles. The effect of particle size on the flame structure (distribution of species and temperature along the axis of the furnace) is also studied. The numerical simulation is in close agreement with the TPS experimental data in the concentrations of species O{sub 2}, CO{sub 2} as well as temperature. Some discrepancy between the model simulations and measurements is observed, which suggests that further improvement in our understanding and modeling the pulverised wood flame is needed.

  2. Adverse obstetric outcomes in women with previous cesarean for dystocia in second stage of labor.

    Science.gov (United States)

    Jastrow, Nicole; Demers, Suzanne; Gauthier, Robert J; Chaillet, Nils; Brassard, Normand; Bujold, Emmanuel

    2013-03-01

    To evaluate obstetric outcomes in women undergoing a trial of labor (TOL) after a previous cesarean for dystocia in second stage of labor. A retrospective cohort study of women with one previous low transverse cesarean undergoing a first TOL was performed. Women with previous cesarean for dystocia in first stage and those with previous dystocia in second stage were compared with those with previous cesarean for nonrecurrent reasons (controls). Multivariable regressions analyses were performed. Of 1655 women, those with previous dystocia in second stage of labor (n = 204) had greater risks than controls (n = 880) to have an operative delivery [odds ratio (OR): 1.5; 95% confidence intervals (CI) 1.1 to 2.2], shoulder dystocia (OR: 2.9; 95% CI 1.1 to 8.0), and uterine rupture in the second stage of labor (OR: 4.9; 95% CI 1.1 to 23), and especially in case of fetal macrosomia (OR: 29.6; 95% CI 4.4 to 202). The median second stage of labor duration before uterine rupture was 2.5 hours (interquartile range: 1.5 to 3.2 hours) in these women. Previous cesarean for dystocia in the second stage of labor is associated with second-stage uterine rupture at next delivery, especially in cases of suspected fetal macrosomia and prolonged second stage of labor. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  3. Support open access publishing

    DEFF Research Database (Denmark)

    Ekstrøm, Jeannette

    2013-01-01

    Projektet Support Open Access Publishing har til mål at få opdateret Sherpa/Romeo databasen (www.sherpa.ac.uk/romeo) med fagligt relevante, danske tidsskrifter. Projektet skal endvidere undersøge mulighederne for at få udviklet en database, hvor forskere på tværs af relevante tidsskriftsinformati......Projektet Support Open Access Publishing har til mål at få opdateret Sherpa/Romeo databasen (www.sherpa.ac.uk/romeo) med fagligt relevante, danske tidsskrifter. Projektet skal endvidere undersøge mulighederne for at få udviklet en database, hvor forskere på tværs af relevante...

  4. A delta-rule model of numerical and non-numerical order processing.

    Science.gov (United States)

    Verguts, Tom; Van Opstal, Filip

    2014-06-01

    Numerical and non-numerical order processing share empirical characteristics (distance effect and semantic congruity), but there are also important differences (in size effect and end effect). At the same time, models and theories of numerical and non-numerical order processing developed largely separately. Currently, we combine insights from 2 earlier models to integrate them in a common framework. We argue that the same learning principle underlies numerical and non-numerical orders, but that environmental features determine the empirical differences. Implications for current theories on order processing are pointed out. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  5. Scientific impact of studies published in temporarily available radiation oncology journals: a citation analysis.

    Science.gov (United States)

    Nieder, Carsten; Geinitz, Hans; Andratschke, Nicolaus H; Grosu, Anca L

    2015-01-01

    The purpose of this study was to review all articles published in two temporarily available radiation oncology journals (Radiation Oncology Investigations, Journal of Radiosurgery) in order to evaluate their scientific impact. From several potential measures of impact and relevance of research, we selected article citation rate because landmark or practice-changing research is likely to be cited frequently. The citation database Scopus was used to analyse number of citations. During the time period 1996-1999 the journal Radiation Oncology Investigations published 205 articles, which achieved a median number of 6 citations (range 0-116). However, the most frequently cited article in the first 4 volumes achieved only 23 citations. The Journal of Radiosurgery published only 31 articles, all in the year 1999, which achieved a median number of 1 citation (range 0-11). No prospective randomized studies or phase I-II collaborative group trials were published in these journals. Apparently, the Journal of Radiosurgery acquired relatively few manuscripts that were interesting and important enough to impact clinical practice. Radiation Oncology Investigations' citation pattern was better and closer related to that reported in several previous studies focusing on the field of radiation oncology. The vast majority of articles published in temporarily available radiation oncology journals had limited clinical impact and achieved few citations. Highly influential research was unlikely to be submitted during the initial phase of establishing new radiation oncology journals.

  6. Numerical Investigation of Mixing Characteristics in Cavity Flow at Various Aspect Ratios

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Myung Seob [Dongyang Mirae University, Seoul (Korea, Republic of); Yang, Seung Deok; Yoon, Joon Yong [Hanyang University, Seoul (Korea, Republic of)

    2015-01-15

    This study numerically examined the mixing characteristics of rectangular cavity flows by using the hybrid lattice Boltzmann method (HLBM) applied to the finite difference method (FDM). Multi-relaxation time was used along with a passive scalar method which assumes that two substances have the same mass and that there is no interaction. First, we studied numerical results such as the stream function, position of vortices, and velocity profile for a square cavity and rectangular cavity with an aspect ratio of 2. The data were compared with previous numerical results that have been proven to be reliable. We also studied the mixing characteristics of a rectangular cavity flow such as the concentration profile and average Sherwood number at various Pe numbers and aspect ratios.

  7. "Are you gonna publish that?" Peer-reviewed publication outcomes of doctoral dissertations in psychology.

    Science.gov (United States)

    Evans, Spencer C; Amaro, Christina M; Herbert, Robyn; Blossom, Jennifer B; Roberts, Michael C

    2018-01-01

    If a doctoral dissertation represents an original investigation that makes a contribution to one's field, then dissertation research could, and arguably should, be disseminated into the scientific literature. However, the extent and nature of dissertation publication remains largely unknown within psychology. The present study investigated the peer-reviewed publication outcomes of psychology dissertation research in the United States. Additionally, we examined publication lag, scientific impact, and variations across subfields. To investigate these questions, we first drew a stratified random cohort sample of 910 psychology Ph.D. dissertations from ProQuest Dissertations & Theses. Next, we conducted comprehensive literature searches for peer-reviewed journal articles derived from these dissertations published 0-7 years thereafter. Published dissertation articles were coded for their bibliographic details, citation rates, and journal impact metrics. Results showed that only one-quarter (25.6% [95% CI: 23.0, 28.4]) of dissertations were ultimately published in peer-reviewed journals, with significant variations across subfields (range: 10.1 to 59.4%). Rates of dissertation publication were lower in professional/applied subfields (e.g., clinical, counseling) compared to research/academic subfields (e.g., experimental, cognitive). When dissertations were published, however, they often appeared in influential journals (e.g., Thomson Reuters Impact Factor M = 2.84 [2.45, 3.23], 5-year Impact Factor M = 3.49 [3.07, 3.90]) and were cited numerous times (Web of Science citations per year M = 3.65 [2.88, 4.42]). Publication typically occurred within 2-3 years after the dissertation year. Overall, these results indicate that the large majority of Ph.D. dissertation research in psychology does not get disseminated into the peer-reviewed literature. The non-publication of dissertation research appears to be a systemic problem affecting both research and training in psychology

  8. Prepare to publish.

    Science.gov (United States)

    Price, P M

    2000-01-01

    "I couldn't possibly write an article." "I don't have anything worthwhile to write about." "I am not qualified to write for publication." Do any of these statements sound familiar? This article is intended to dispel these beliefs. You can write an article. You care for the most complex patients in the health care system so you do have something worthwhile to write about. Beside correct spelling and grammar there are no special skills, certificates or diplomas required for publishing. You are qualified to write for publication. The purpose of this article is to take the mystique out of the publication process. Each step of publishing an article will be explained, from idea formation to framing your first article. Practical examples and recommendations will be presented. The essential components of the APA format necessary for Dynamics: The Official Journal of the Canadian Association of Critical Care Nurses will be outlined and resources to assist you will be provided.

  9. Modeling and numerical simulation of multi-component flow in porous media

    International Nuclear Information System (INIS)

    Saad, B.

    2011-01-01

    This work deals with the modelization and numerical simulation of two phase multi-component flow in porous media. The study is divided into two parts. First we study and prove the mathematical existence in a weak sense of two degenerate parabolic systems modeling two phase (liquid and gas) two component (water and hydrogen) flow in porous media. In the first model, we assume that there is a local thermodynamic equilibrium between both phases of hydrogen by using the Henry's law. The second model consists of a relaxation of the previous model: the kinetic of the mass exchange between dissolved hydrogen and hydrogen in the gas phase is no longer instantaneous. The second part is devoted to the numerical analysis of those models. Firstly, we propose a numerical scheme to compare numerical solutions obtained with the first model and numerical solutions obtained with the second model where the characteristic time to recover the thermodynamic equilibrium goes to zero. Secondly, we present a finite volume scheme with a phase-by-phase upstream weighting scheme without simplified assumptions on the state law of gas densities. We also validate this scheme on a 2D test cases. (author)

  10. The phenomenon of claimed memories of previous lives: possible interpretations and importance.

    Science.gov (United States)

    Stevenson, I

    2000-04-01

    Several disorders or abnormalities observed in medicine and psychology are not explicable (or not fully explicable) by genetics and environmental influences, either alone or together. These include phobias and philias observed in early infancy, unusual play in childhood, homosexuality, gender identity disorder, a child's idea of having parents other than its own, differences in temperament manifested soon after birth, unusual birthmarks and their correspondence with wounds on a deceased person, unusual birth defects, and differences (physical and behavioral) between monozygotic twins. The hypothesis of previous lives can contribute to the further understanding of these phenomena. Copyright 2000 Harcourt Publishers Ltd.

  11. Summary of Notifiable Noninfectious Conditions and Disease Outbreaks: Surveillance Data Published Between April 1, 2016 and January 31, 2017 - United States.

    Science.gov (United States)

    Thomas, Kimberly; Jajosky, Ruth; Coates, Ralph J; Calvert, Geoffrey M; Dewey-Mattia, Daniel; Raymond, Jaime; Singh, Simple D

    2017-08-11

    The Summary of Notifiable Noninfectious Conditions and Disease Outbreaks: Surveillance Data Published Between April 1, 2016 and January 31, 2017 - United States, herein referred to as the Summary (Noninfectious), contains official statistics for nationally notifiable noninfectious conditions and disease outbreaks. This Summary (Noninfectious) is being published in the same volume of MMWR as the annual Summary of Notifiable Infectious Diseases and Conditions (1). Data on notifiable noninfectious conditions and disease outbreaks from prior years have been published previously (2,3).

  12. Numerical modelling of flow and transport in rough fractures

    Directory of Open Access Journals (Sweden)

    Scott Briggs

    2014-12-01

    Full Text Available Simulation of flow and transport through rough walled rock fractures is investigated using the lattice Boltzmann method (LBM and random walk (RW, respectively. The numerical implementation is developed and validated on general purpose graphic processing units (GPGPUs. Both the LBM and RW method are well suited to parallel implementation on GPGPUs because they require only next-neighbour communication and thus can reduce expenses. The LBM model is an order of magnitude faster on GPGPUs than published results for LBM simulations run on modern CPUs. The fluid model is verified for parallel plate flow, backward facing step and single fracture flow; and the RW model is verified for point-source diffusion, Taylor-Aris dispersion and breakthrough behaviour in a single fracture. Both algorithms place limitations on the discrete displacement of fluid or particle transport per time step to minimise the numerical error that must be considered during implementation.

  13. Playing Linear Numerical Board Games Promotes Low-Income Children's Numerical Development

    Science.gov (United States)

    Siegler, Robert S.; Ramani, Geetha B.

    2008-01-01

    The numerical knowledge of children from low-income backgrounds trails behind that of peers from middle-income backgrounds even before the children enter school. This gap may reflect differing prior experience with informal numerical activities, such as numerical board games. Experiment 1 indicated that the numerical magnitude knowledge of…

  14. Comics, Copyright and Academic Publishing

    Directory of Open Access Journals (Sweden)

    Ronan Deazley

    2014-05-01

    Full Text Available This article considers the extent to which UK-based academics can rely upon the copyright regime to reproduce extracts and excerpts from published comics and graphic novels without having to ask the copyright owner of those works for permission. In doing so, it invites readers to engage with a broader debate about the nature, demands and process of academic publishing.

  15. An analytical and numerical study of solar chimney use for room natural ventilation

    Energy Technology Data Exchange (ETDEWEB)

    Bassiouny, Ramadan; Koura, Nader S.A. [Department of Mechanical Power Engineering and Energy, Minia University, Minia 61111 (Egypt)

    2008-07-01

    The solar chimney concept used for improving room natural ventilation was analytically and numerically studied. The study considered some geometrical parameters such as chimney inlet size and width, which are believed to have a significant effect on space ventilation. The numerical analysis was intended to predict the flow pattern in the room as well as in the chimney. This would help optimizing design parameters. The results were compared with available published experimental and theoretical data. There was an acceptable trend match between the present analytical results and the published data for the room air change per hour, ACH. Further, it was noticed that the chimney width has a more significant effect on ACH compared to the chimney inlet size. The results showed that the absorber average temperature could be correlated to the intensity as: (T{sub w} = 3.51I{sup 0.461}) with an accepted range of approximation error. In addition the average air exit velocity was found to vary with the intensity as ({nu}{sub ex} = 0.013I{sup 0.4}). (author)

  16. Numerical algorithms for intragranular diffusional fission gas release incorporated in the Transuranus code

    International Nuclear Information System (INIS)

    Lassmann, K.

    2002-01-01

    Complicated physical processes govern diffusional fission gas release in nuclear fuels. In addition to the physical problem there exists a numerical problem, as some solutions of the underlying diffusion equation contain numerical errors that by far exceed the physical details. In this paper the two algorithms incorporated in the TRANSURANUS code, the URGAS and the new FORMAS algorithm are compared. The previously reported deficiency of the most elegant and mathematically sound FORMAS algorithm at low release could be overcome. Both algorithms are simple, fast, without numerical problems, insensitive to time step lengths and well balanced over the entire range of fission gas release. They can be made available on request as FORTRAN subroutines. (author)

  17. Numerical analysis of anisotropic diffusion effect on ICF hydrodynamic instabilities

    Directory of Open Access Journals (Sweden)

    Olazabal-Loumé M.

    2013-11-01

    Full Text Available The effect of anisotropic diffusion on hydrodynamic instabilities in the context of Inertial Confinement Fusion (ICF flows is numerically assessed. This anisotropy occurs in indirect-drive when laminated ablators are used to modify the lateral transport [1,2]. In direct-drive, non-local transport mechanisms and magnetic fields may modify the lateral conduction [3]. In this work, numerical simulations obtained with the code PERLE [4], dedicated to linear stability analysis, are compared with previous theoretical results [5]. In these approaches, the diffusion anisotropy can be controlled by a characteristic coefficient which enables a comprehensive study. This work provides new results on the ablative Rayleigh-Taylor (RT, ablative Richtmyer-Meshkov (RM and Darrieus-Landau (DL instabilities.

  18. Incorporating excitation-induced dephasing into the Maxwell-Bloch numerical modeling of photon echoes

    International Nuclear Information System (INIS)

    Burr, G.W.; Harris, Todd L.; Babbitt, Wm. Randall; Jefferson, C. Michael

    2004-01-01

    We describe the incorporation of excitation-induced dephasing (EID) into the Maxwell-Bloch numerical simulation of photon echoes. At each time step of the usual numerical integration, stochastic frequency jumps of ions--caused by excitation of neighboring ions--is modeled by convolving each Bloch vector with the Bloch vectors of nearby frequency detunings. The width of this convolution kernel follows the instantaneous change in overall population, integrated over the simulated bandwidth. This approach is validated by extensive comparison against published and original experimental results. The enhanced numerical model is then used to investigate the accuracy of experiments designed to extrapolate to the intrinsic dephasing time T 2 from data taken in the presence of EID. Such a modeling capability offers improved understanding of experimental results, and should allow quantitative analysis of engineering tradeoffs in realistic optical coherent transient applications

  19. Electronic publishing and Acupuncture in Medicine.

    Science.gov (United States)

    White, Adrian

    2006-09-01

    The internet has fundamentally altered scientific publishing; this article discusses current models and how they affect this journal. The greatest innovation is a new range of open access journals published only on the internet, aimed at rapid publication and universal access. In most cases authors pay a publication charge for the overhead costs of the journal. Journals that are published by professional organisations primarily for their members have some functions other than publishing research, including clinical articles, conference reports and news items. A small number of these journals are permitting open access to their research reports. Commercial science publishing still exists, where profit for shareholders provides motivation in addition to the desire to spread knowledge for the benefit of all. A range of electronic databases now exists that offer various levels of listing and searching. Some databases provide direct links to journal articles, such as the LinkOut scheme in PubMed. Acupuncture in Medicine will continue to publish in paper format; all research articles will be available on open access, but non-subscribers will need to pay for certain other articles for the first 12 months after publication. All Acupuncture in Medicine articles will in future be included in the LinkOut scheme, and be presented to the databases electronically.

  20. New numerical method for solving the solute transport equation

    International Nuclear Information System (INIS)

    Ross, B.; Koplik, C.M.

    1978-01-01

    The solute transport equation can be solved numerically by approximating the water flow field by a network of stream tubes and using a Green's function solution within each stream tube. Compared to previous methods, this approach permits greater computational efficiency and easier representation of small discontinuities, and the results are easier to interpret physically. The method has been used to study hypothetical sites for disposal of high-level radioactive waste

  1. Application of numerical inverse method in calculation of composition-dependent interdiffusion coefficients in finite diffusion couples

    DEFF Research Database (Denmark)

    Liu, Yuanrong; Chen, Weimin; Zhong, Jing

    2017-01-01

    The previously developed numerical inverse method was applied to determine the composition-dependent interdiffusion coefficients in single-phase finite diffusion couples. The numerical inverse method was first validated in a fictitious binary finite diffusion couple by pre-assuming four standard...... sets of interdiffusion coefficients. After that, the numerical inverse method was then adopted in a ternary Al-Cu-Ni finite diffusion couple. Based on the measured composition profiles, the ternary interdiffusion coefficients along the entire diffusion path of the target ternary diffusion couple were...... obtained by using the numerical inverse approach. The comprehensive comparisons between the computations and the experiments indicate that the numerical inverse method is also applicable to high-throughput determination of the composition-dependent interdiffusion coefficients in finite diffusion couples....

  2. Numerical simulations of compact intracloud discharges as the Relativistic Runaway Electron Avalanche-Extensive Air Shower process

    Science.gov (United States)

    Arabshahi, S.; Dwyer, J. R.; Nag, A.; Rakov, V. A.; Rassoul, H. K.

    2014-01-01

    Compact intracloud discharges (CIDs) are sources of the powerful, often isolated radio pulses emitted by thunderstorms. The VLF-LF radio pulses are called narrow bipolar pulses (NBPs). It is still not clear how CIDs are produced, but two categories of theoretical models that have previously been considered are the Transmission Line (TL) model and the Relativistic Runaway Electron Avalanche-Extensive Air Showers (RREA-EAS) model. In this paper, we perform numerical calculations of RREA-EASs for various electric field configurations inside thunderstorms. The results of these calculations are compared to results from the other models and to the experimental data. Our analysis shows that different theoretical models predict different fundamental characteristics for CIDs. Therefore, many previously published properties of CIDs are highly model dependent. This is because of the fact that measurements of the radiation field usually provide information about the current moment of the source, and different physical models with different discharge currents could have the same current moment. We have also found that although the RREA-EAS model could explain the current moments of CIDs, the required electric fields in the thundercloud are rather large and may not be realistic. Furthermore, the production of NBPs from RREA-EAS requires very energetic primary cosmic ray particles, not observed in nature. If such ultrahigh-energy particles were responsible for NBPs, then they should be far less frequent than is actually observed.

  3. Self-reported previous knee injury and low knee function increase knee injury risk in adolescent female football.

    Science.gov (United States)

    Clausen, M B; Tang, L; Zebis, M K; Krustrup, P; Hölmich, P; Wedderkopp, N; Andersen, L L; Christensen, K B; Møller, M; Thorborg, K

    2016-08-01

    Knee injuries are common in adolescent female football. Self-reported previous knee injury and low Knee injury and Osteoarthritis Outcome Score (KOOS) are proposed to predict future knee injuries, but evidence regarding this in adolescent female football is scarce. The aim of this study was to investigate self-reported previous knee injury and low KOOS subscale score as risk factors for future knee injuries in adolescent female football. A sample of 326 adolescent female football players, aged 15-18, without knee injury at baseline, were included. Data on self-reported previous knee injury and KOOS questionnaires were collected at baseline. Time-loss knee injuries and football exposures were reported weekly by answers to standardized text-message questions, followed by injury telephone interviews. A priori, self-reported previous knee injury and low KOOS subscale scores (female football. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Electronic publishing in radiology: economics and the future.

    Science.gov (United States)

    Chew, Felix S; Llewellyn, Kevin T; Olsen, Kathryn M

    2004-11-01

    Scholarly publishing is a large market involving thousands of peer-reviewed journals but a decreasing number of publishers. An economic model can be described in which authors give their work to publishers who then sell access to this work. Because each published article is a unique work with few if any substitutes, publishers have some degree of monopoly power and can price their products accordingly. The advent of desktop publishing using personal computers made it possible for individuals to publish material without publishers, an activity that gained momentum when the publishing medium shifted from paper to electronic, and from electronic publishing to the Internet. This activity destabilized the industry, and in the rush to gain market share by providing free content, unsustainable business models were created. Scholarly publishing is now dominated by a small number of multinational corporations that acquired many smaller publishing operations. As these companies have exercised their monopoly power, an open access movement has gained traction in which authors (or their institutions) initially pay for publication, but readers have free and open access to the published articles. This movement is in diametric opposition to the commercial publishing model, and it remains to be seen whether and how well the two can coexist in the future.

  5. NUMISHEET 2016: 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes

    International Nuclear Information System (INIS)

    2016-01-01

    The NUMISHEET conference series have been established as a world-class forum through which new intellectual ideas and technologies in the area of sheet metal forming simulation are exchanged. Previous NUMISHEET conferences have given enormous contributions to industry and academia in what regards the development of new methods and ideas for the numerical simulation of sheet metal forming processes. Previous NUMISHEET conferences were held in: Zurich (Switzerland, 1991), Isehara (Japan, 1993), Dearborn (USA, 1996), Besancon (France, 1999), Jeju Island (South Korea, 2002), Detroit (USA, 2005), Interlaken (Switzerland, 2008), Seoul (South Korea, 2011) and Melbourne (Australia, 2014). The NUMISHEET 2016 conference will be held in Bristol, UK. It features technical, keynote and plenary sessions and mini-symposiums in diverse sheet metal forming areas including the recently introduced incremental sheet forming and electromagnetic forming, as well as new prominent numerical methods such as IsoGeometric Analysis and meshless methods for sheet analysis. NUMISHEET 2016 will have eight academic plenary lectures delivered by worldwide recognised experts in the areas of sheet metal forming, material modelling and numerical methods in general. Also, NUMISHEET 2016 will have three industrial plenary lectures which will be addressed by three different companies with strong businesses in sheet metal forming processes: AutoForm, Crown Technology and Jaguar Land Rover. One of the most distinguishing features of NUMISHEET conference series is the industrial benchmark sessions, during which numerical simulations of industrial sheet formed parts are compared with experimental results from the industry. The benchmark sessions provide an extraordinary opportunity for networking, for the exchange of technologies related to sheet metal forming and for the numerical validation of sheet metal forming codes/software. Three benchmark studies have been organised in NUMISHEET 2016: BM1) &apos

  6. Adventures in semantic publishing: exemplar semantic enhancements of a research article.

    Directory of Open Access Journals (Sweden)

    David Shotton

    2009-04-01

    Full Text Available Scientific innovation depends on finding, integrating, and re-using the products of previous research. Here we explore how recent developments in Web technology, particularly those related to the publication of data and metadata, might assist that process by providing semantic enhancements to journal articles within the mainstream process of scholarly journal publishing. We exemplify this by describing semantic enhancements we have made to a recent biomedical research article taken from PLoS Neglected Tropical Diseases, providing enrichment to its content and increased access to datasets within it. These semantic enhancements include provision of live DOIs and hyperlinks; semantic markup of textual terms, with links to relevant third-party information resources; interactive figures; a re-orderable reference list; a document summary containing a study summary, a tag cloud, and a citation analysis; and two novel types of semantic enrichment: the first, a Supporting Claims Tooltip to permit "Citations in Context", and the second, Tag Trees that bring together semantically related terms. In addition, we have published downloadable spreadsheets containing data from within tables and figures, have enriched these with provenance information, and have demonstrated various types of data fusion (mashups with results from other research articles and with Google Maps. We have also published machine-readable RDF metadata both about the article and about the references it cites, for which we developed a Citation Typing Ontology, CiTO (http://purl.org/net/cito/. The enhanced article, which is available at http://dx.doi.org/10.1371/journal.pntd.0000228.x001, presents a compelling existence proof of the possibilities of semantic publication. We hope the showcase of examples and ideas it contains, described in this paper, will excite the imaginations of researchers and publishers, stimulating them to explore the possibilities of semantic publishing for their own

  7. The Impact of Electronic Commerce on the Publishing Industry: Towards a Business Value Complementarity Framework of Electronic Publishing.

    Science.gov (United States)

    Scupola, Ada

    1999-01-01

    Discussion of the publishing industry and its use of information and communication technologies focuses on the way in which electronic-commerce technologies are changing and could change the publishing processes, and develops a business complementarity model of electronic publishing to maximize profitability and improve the competitive position.…

  8. Strategic Brand Management Tools in Publishing

    OpenAIRE

    Pitsaki, Irini

    2011-01-01

    Further to the introduction of the brand concept evolution and theory, as well as the ways these operate in the publishing sector (see paper: Pitsaki, I. 2010), the present paper treats publishing strategies and the tools used to establish them. Publishers often base their brand strategy on classic marketing approaches, such as the marketing mix -product, price, promotion, placement and people. They also direct their products to specific market segments in regard to the type of content and te...

  9. Residents' numeric inputting error in computerized physician order entry prescription.

    Science.gov (United States)

    Wu, Xue; Wu, Changxu; Zhang, Kan; Wei, Dong

    2016-04-01

    Computerized physician order entry (CPOE) system with embedded clinical decision support (CDS) can significantly reduce certain types of prescription error. However, prescription errors still occur. Various factors such as the numeric inputting methods in human computer interaction (HCI) produce different error rates and types, but has received relatively little attention. This study aimed to examine the effects of numeric inputting methods and urgency levels on numeric inputting errors of prescription, as well as categorize the types of errors. Thirty residents participated in four prescribing tasks in which two factors were manipulated: numeric inputting methods (numeric row in the main keyboard vs. numeric keypad) and urgency levels (urgent situation vs. non-urgent situation). Multiple aspects of participants' prescribing behavior were measured in sober prescribing situations. The results revealed that in urgent situations, participants were prone to make mistakes when using the numeric row in the main keyboard. With control of performance in the sober prescribing situation, the effects of the input methods disappeared, and urgency was found to play a significant role in the generalized linear model. Most errors were either omission or substitution types, but the proportion of transposition and intrusion error types were significantly higher than that of the previous research. Among numbers 3, 8, and 9, which were the less common digits used in prescription, the error rate was higher, which was a great risk to patient safety. Urgency played a more important role in CPOE numeric typing error-making than typing skills and typing habits. It was recommended that inputting with the numeric keypad had lower error rates in urgent situation. An alternative design could consider increasing the sensitivity of the keys with lower frequency of occurrence and decimals. To improve the usability of CPOE, numeric keyboard design and error detection could benefit from spatial

  10. Numerical modeling of batch formation in waste incineration plants

    Directory of Open Access Journals (Sweden)

    Obroučka Karel

    2015-03-01

    Full Text Available The aim of this paper is a mathematical description of algorithm for controlled assembly of incinerated batch of waste. The basis for formation of batch is selected parameters of incinerated waste as its calorific value or content of pollutants or the combination of both. The numerical model will allow, based on selected criteria, to compile batch of wastes which continuously follows the previous batch, which is a prerequisite for optimized operation of incinerator. The model was prepared as for waste storage in containers, as well as for waste storage in continuously refilled boxes. The mathematical model was developed into the computer program and its functionality was verified either by practical measurements or by numerical simulations. The proposed model can be used in incinerators for hazardous and municipal waste.

  11. Ethical issues in publishing in predatory journals.

    Science.gov (United States)

    Ferris, Lorraine E; Winker, Margaret A

    2017-06-15

    Predatory journals, or journals that charge an article processing charge (APC) to authors, yet do not have the hallmarks of legitimate scholarly journals such as peer review and editing, Editorial Boards, editorial offices, and other editorial standards, pose a number of new ethical issues in journal publishing. This paper discusses ethical issues around predatory journals and publishing in them. These issues include misrepresentation; lack of editorial and publishing standards and practices; academic deception; research and funding wasted; lack of archived content; and undermining confidence in research literature. It is important that the scholarly community, including authors, institutions, editors, and publishers, support the legitimate scholarly research enterprise, and avoid supporting predatory journals by not publishing in them, serving as their editors or on the Editorial Boards, or permitting faculty to knowingly publish in them without consequences.

  12. Numerical modelling of ion transport in flames

    KAUST Repository

    Han, Jie

    2015-10-20

    This paper presents a modelling framework to compute the diffusivity and mobility of ions in flames. The (n, 6, 4) interaction potential is adopted to model collisions between neutral and charged species. All required parameters in the potential are related to the polarizability of the species pair via semi-empirical formulas, which are derived using the most recently published data or best estimates. The resulting framework permits computation of the transport coefficients of any ion found in a hydrocarbon flame. The accuracy of the proposed method is evaluated by comparing its predictions with experimental data on the mobility of selected ions in single-component neutral gases. Based on this analysis, the value of a model constant available in the literature is modified in order to improve the model\\'s predictions. The newly determined ion transport coefficients are used as part of a previously developed numerical approach to compute the distribution of charged species in a freely propagating premixed lean CH4/O2 flame. Since a significant scatter of polarizability data exists in the literature, the effects of changes in polarizability on ion transport properties and the spatial distribution of ions in flames are explored. Our analysis shows that changes in polarizability propagate with decreasing effect from binary transport coefficients to species number densities. We conclude that the chosen polarizability value has a limited effect on the ion distribution in freely propagating flames. We expect that the modelling framework proposed here will benefit future efforts in modelling the effect of external voltages on flames. Supplemental data for this article can be accessed at http://dx.doi.org/10.1080/13647830.2015.1090018. © 2015 Taylor & Francis.

  13. Force-controlled absorption in a fully-nonlinear numerical wave tank

    International Nuclear Information System (INIS)

    Spinneken, Johannes; Christou, Marios; Swan, Chris

    2014-01-01

    An active control methodology for the absorption of water waves in a numerical wave tank is introduced. This methodology is based upon a force-feedback technique which has previously been shown to be very effective in physical wave tanks. Unlike other methods, an a-priori knowledge of the wave conditions in the tank is not required; the absorption controller being designed to automatically respond to a wide range of wave conditions. In comparison to numerical sponge layers, effective wave absorption is achieved on the boundary, thereby minimising the spatial extent of the numerical wave tank. In contrast to the imposition of radiation conditions, the scheme is inherently capable of absorbing irregular waves. Most importantly, simultaneous generation and absorption can be achieved. This is an important advance when considering inclusion of reflective bodies within the numerical wave tank. In designing the absorption controller, an infinite impulse response filter is adopted, thereby eliminating the problem of non-causality in the controller optimisation. Two alternative controllers are considered, both implemented in a fully-nonlinear wave tank based on a multiple-flux boundary element scheme. To simplify the problem under consideration, the present analysis is limited to water waves propagating in a two-dimensional domain. The paper presents an extensive numerical validation which demonstrates the success of the method for a wide range of wave conditions including regular, focused and random waves. The numerical investigation also highlights some of the limitations of the method, particularly in simultaneously generating and absorbing large amplitude or highly-nonlinear waves. The findings of the present numerical study are directly applicable to related fields where optimum absorption is sought; these include physical wavemaking, wave power absorption and a wide range of numerical wave tank schemes

  14. Incorporation of the capillary hysteresis model HYSTR into the numerical code TOUGH

    International Nuclear Information System (INIS)

    Niemi, A.; Bodvarsson, G.S.; Pruess, K.

    1991-11-01

    As part of the work performed to model flow in the unsaturated zone at Yucca Mountain Nevada, a capillary hysteresis model has been developed. The computer program HYSTR has been developed to compute the hysteretic capillary pressure -- liquid saturation relationship through interpolation of tabulated data. The code can be easily incorporated into any numerical unsaturated flow simulator. A complete description of HYSTR, including a brief summary of the previous hysteresis literature, detailed description of the program, and instructions for its incorporation into a numerical simulator are given in the HYSTR user's manual (Niemi and Bodvarsson, 1991a). This report describes the incorporation of HYSTR into the numerical code TOUGH (Transport of Unsaturated Groundwater and Heat; Pruess, 1986). The changes made and procedures for the use of TOUGH for hysteresis modeling are documented

  15. Validation of a numerical FSI simulation of an aortic BMHV by in vitro PIV experiments.

    Science.gov (United States)

    Annerel, S; Claessens, T; Degroote, J; Segers, P; Vierendeels, J

    2014-08-01

    In this paper, a validation of a recently developed fluid-structure interaction (FSI) coupling algorithm to simulate numerically the dynamics of an aortic bileaflet mechanical heart valve (BMHV) is performed. This validation is done by comparing the numerical simulation results with in vitro experiments. For the in vitro experiments, the leaflet kinematics and flow fields are obtained via the particle image velocimetry (PIV) technique. Subsequently, the same case is numerically simulated by the coupling algorithm and the resulting leaflet kinematics and flow fields are obtained. Finally, the results are compared, revealing great similarity in leaflet motion and flow fields between the numerical simulation and the experimental test. Therefore, it is concluded that the developed algorithm is able to capture very accurately all the major leaflet kinematics and dynamics and can be used to study and optimize the design of BMHVs. Copyright © 2014 IPEM. Published by Elsevier Ltd. All rights reserved.

  16. INNOVATION MANAGEMENT TOOLS IN PUBLISHING COMPANIES

    Directory of Open Access Journals (Sweden)

    A. Shegda

    2013-09-01

    Full Text Available This article is devoted to the highly topical issue of modern publishing business as innovation management. introduction of technological innovation, measured as a promising strategy for the development of a constructive industry. The paper deals with main problems in managing of publishing companies. The reference consider of innovation management tools. In the article are exams the problems of books trend decline which require publishers introducing innovative methods of production and distribution. It was found that while the tools can be used. The process of innovation management with the following basic tools like as marketing innovation bench marketing, franchising, engineering innovation. It was found that while the tools can be used. So, the aim of the article is to analyze the modern tools of innovation management in the publishing field.

  17. Critical analysis of marketing in Croatian publishing

    Directory of Open Access Journals (Sweden)

    Silvija Gašparić

    2018-03-01

    Full Text Available Marketing is an inevitable part of today's modern lifestyle. The role that marketing plays is so big that it has become the most important part of business. Due to crisis that is still affecting publishers in Croatia, this paper emphasizes the power of advertising as a key ingredient in how to overcome this situation and upgrade the system of publishing in Croatia. The framework of the paper is based on marketing as a tool that leads to popularization of books and sales increase. Beside the experimental part which gives an insight into public's opinion about books, publishing and marketing, the first chapter gives the literature review and analysis conducted on the whole process of book publishing in Croatia with pointing out mistakes that Croatian publishers make. Also, benefits of foreign publishing will be mentioned and used for comparison and projection on to the problems of the native market. The aim of this analysis and this viewpoint paper is to contribute the comprehension of marketing strategies and activities and its use and gains in Croatian publishing.

  18. Desktop Publishing: Changing Technology, Changing Occupations.

    Science.gov (United States)

    Stanton, Michael

    1991-01-01

    Describes desktop publishing (DTP) and its place in corporations. Lists job titles of those working in desktop publishing and describes DTP as it is taught at secondary and postsecondary levels and by private trainers. (JOW)

  19. The Fermi-Pasta-Ulam model: the birth of numerical simulation

    OpenAIRE

    De Tullio, Jacopo

    2016-01-01

    In May 1955 the Los Alamos Scientific Laboratory published the technical report “Studies of nonlinear problems” by E. Fermi, J. Pasta and S. Ulam in which, for the first time, a computer was used to perform an experiment through numerical simulations. The present paper surveys the history of the experiment, its unexpected outcomes, such as the so-called FPU paradox, and the related studies by some of the greatest mathematicians of the time, following them to the most recent results and discov...

  20. A Survey of Patients' Preoperative Need for Information About Postoperative Pain-Effect of Previous Surgery Experience.

    Science.gov (United States)

    Mavridou, Paraskevi; Manataki, Adamantia; Arnaoutoglou, Elena; Damigos, Dimitrios

    2017-10-01

    The aim of this study was to determine the kind of information patients need preoperatively about postoperative pain (POP) and whether this is affected by previous surgery experience. A descriptive study design using preoperative questionnaires. Questionnaires with fixed questions related to POP and its management were distributed preoperatively to consenting, consecutive surgical patients. Patients were divided into two groups: patients with previous surgery experience (group A) and patients without previous surgery experience (group B). Of the patients who participated in the study, 94.2% wanted information about POP and 77.8% of them believe that they will feel calmer if they get the information they need. The patients' biggest concern relates to pain management issues after discharge. Next, in order of preference is information about the analgesics that they need to take. The patients want to be informed primarily with a personal interview (59.4%). Previous surgery experience has no effect on patients' needs for information. Most of the patients want to be informed about the management of the POP after being discharged. It is remarkable that patients who had previous surgery experience need the same information with those who had no previous surgery. Copyright © 2016 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

  1. Promises and Realities of Desktop Publishing.

    Science.gov (United States)

    Thompson, Patricia A.; Craig, Robert L.

    1991-01-01

    Examines the underlying assumptions of the rhetoric of desktop publishing promoters. Suggests four criteria to help educators provide insights into issues and challenges concerning desktop publishing technology that design students will face on the job. (MG)

  2. Theoretical and numerical study of an optimum design algorithm

    International Nuclear Information System (INIS)

    Destuynder, Philippe.

    1976-08-01

    This work can be separated into two main parts. First, the behavior of the solution of an elliptic variational equation is analyzed when the domain is submitted to a small perturbation. The case of inequations is also considered. Secondly the previous results are used for deriving an optimum design algorithm. This algorithm was suggested by the center-method proposed by Huard. Numerical results show the superiority of the method on other different optimization techniques [fr

  3. Making the Leap to Desktop Publishing.

    Science.gov (United States)

    Schleifer, Neal

    1986-01-01

    Describes one teacher's approach to desktop publishing. Explains how the Macintosh and LaserWriter were used in the publication of a school newspaper. Guidelines are offered to teachers for the establishment of a desktop publishing lab. (ML)

  4. Electronic Journal Publishing: Observations from Inside.

    Science.gov (United States)

    Hunter, Karen

    1998-01-01

    Focuses on electronic scholarly-journal publishing. Discusses characteristics of current academic electronic publishing; effects of the World Wide Web; user needs and positions of academic libraries; costs; and decisions of research librarians that drive the industry. (AEF)

  5. Open Access Publishing in the Electronic Age.

    Science.gov (United States)

    Kovács, Gábor L

    2014-10-01

    The principle of open-access (OA) publishing is more and more prevalent also on the field of laboratory medicine. Open-access journals (OAJs) are available online to the reader usually without financial, legal, or technical barriers. Some are subsidized, and some require payment on behalf of the author. OAJs are one of the two general methods for providing OA. The other one is self-archiving in a repository. The electronic journal of the IFCC (eJIFCC) is a platinum OAJ- i.e. there is no charge to read, or to submit to this journal. Traditionally, the author was required to transfer the copyright to the journal publisher. Publishers claimed this was necessary in order to protect author's rights. However, many authors found this unsatisfactory, and have used their influence to affect a gradual move towards a license to publish instead. Under such a system, the publisher has permission to edit, print, and distribute the article commercially, but the author(s) retain the other rights themselves. An OA mandate is a policy adopted by a research institution, research funder, or government which requires researchers to make their published, peer-reviewed journal articles and conference papers OA by self-archiving their peer-reviewed drafts in a repository ("green OA") or by publishing them in an OAJ ("gold OA"). Creative Commons (CC) is a nonprofit organization that enables the sharing and use of creativity and knowledge through free legal tools. The free, easy-to-use copyright licenses provide a simple, standardized way to give the public permission to share and use creative work. CC licenses let you easily change your copyright terms from the default of "all rights reserved" to "some rights reserved." OA publishing also raises a number of new ethical problems (e.g. predatory publishers, fake papers). Laboratory scientists are encouraged to publish their scientific results OA (especially in eJIFCC). They should, however, be aware of their rights, institutional mandate

  6. A CFD numerical model for the flow distribution in a MTR fuel element

    International Nuclear Information System (INIS)

    Andrade, Delvonei Alves de; Santos, Pedro Henrique Di Giovanni; Oliveira, Fabio Branco Vaz de; Torres, Walmir Maximo; Umbehaun, Pedro Ernesto; Souza, Jose Antonio Batista de; Belchior Junior, Antonio; Sabundjian, Gaiane; Prado, Adelk de Carvalho; Angelo, Gabriel

    2015-01-01

    Previously, an instrumented dummy fuel element (DMPV-01), with the same geometric characteristics of a MTR fuel element, was designed and constructed for pressure drop and flow distribution measurement experiments at the IEA-R1 reactor core. This dummy element was also used to measure the flow distribution among the rectangular flow channels formed by element fuel plates. A CFD numerical model was developed to complement the studies. This work presents the proposed CFD model as well as a comparison between numerical and experimental results of flow rate distribution among the internal flow channels. Numerical results show that the model reproduces the experiments very well and can be used for the studies as a more convenient and complementary tool. (author)

  7. A CFD numerical model for the flow distribution in a MTR fuel element

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Delvonei Alves de; Santos, Pedro Henrique Di Giovanni; Oliveira, Fabio Branco Vaz de; Torres, Walmir Maximo; Umbehaun, Pedro Ernesto; Souza, Jose Antonio Batista de; Belchior Junior, Antonio; Sabundjian, Gaiane; Prado, Adelk de Carvalho, E-mail: acprado@ipen.br, E-mail: delvonei@ipen.br, E-mail: dpedro_digiovanni_s@hotmail.com, E-mail: fabio@ipen.br, E-mail: wmtorres@ipen.br, E-mail: umbehaun@ipen.br, E-mail: jasouza@ipen.br, E-mail: abelchior@ipen.br, E-mail: gdjian@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Engenharia Nuclear; Angelo, Edvaldo, E-mail: eangelo@mackenzie.br [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil); Angelo, Gabriel, E-mail: gangelo@fei.edu.br [Fundacao Educacional Inaciana (FEI), Sao Bernardo do Campo, SP (Brazil)

    2015-07-01

    Previously, an instrumented dummy fuel element (DMPV-01), with the same geometric characteristics of a MTR fuel element, was designed and constructed for pressure drop and flow distribution measurement experiments at the IEA-R1 reactor core. This dummy element was also used to measure the flow distribution among the rectangular flow channels formed by element fuel plates. A CFD numerical model was developed to complement the studies. This work presents the proposed CFD model as well as a comparison between numerical and experimental results of flow rate distribution among the internal flow channels. Numerical results show that the model reproduces the experiments very well and can be used for the studies as a more convenient and complementary tool. (author)

  8. Experimental and Numerical Simulations Predictions Comparison of Power and Efficiency in Hydraulic Turbine

    Directory of Open Access Journals (Sweden)

    Laura Castro

    2011-01-01

    Full Text Available On-site power and mass flow rate measurements were conducted in a hydroelectric power plant (Mexico. Mass flow rate was obtained using Gibson's water hammer-based method. A numerical counterpart was carried out by using the commercial CFD software, and flow simulations were performed to principal components of a hydraulic turbine: runner and draft tube. Inlet boundary conditions for the runner were obtained from a previous simulation conducted in the spiral case. The computed results at the runner's outlet were used to conduct the subsequent draft tube simulation. The numerical results from the runner's flow simulation provided data to compute the torque and the turbine's power. Power-versus-efficiency curves were built, and very good agreement was found between experimental and numerical data.

  9. Dynamic optimization of distributed biological systems using robust and efficient numerical techniques.

    Science.gov (United States)

    Vilas, Carlos; Balsa-Canto, Eva; García, Maria-Sonia G; Banga, Julio R; Alonso, Antonio A

    2012-07-02

    Systems biology allows the analysis of biological systems behavior under different conditions through in silico experimentation. The possibility of perturbing biological systems in different manners calls for the design of perturbations to achieve particular goals. Examples would include, the design of a chemical stimulation to maximize the amplitude of a given cellular signal or to achieve a desired pattern in pattern formation systems, etc. Such design problems can be mathematically formulated as dynamic optimization problems which are particularly challenging when the system is described by partial differential equations.This work addresses the numerical solution of such dynamic optimization problems for spatially distributed biological systems. The usual nonlinear and large scale nature of the mathematical models related to this class of systems and the presence of constraints on the optimization problems, impose a number of difficulties, such as the presence of suboptimal solutions, which call for robust and efficient numerical techniques. Here, the use of a control vector parameterization approach combined with efficient and robust hybrid global optimization methods and a reduced order model methodology is proposed. The capabilities of this strategy are illustrated considering the solution of a two challenging problems: bacterial chemotaxis and the FitzHugh-Nagumo model. In the process of chemotaxis the objective was to efficiently compute the time-varying optimal concentration of chemotractant in one of the spatial boundaries in order to achieve predefined cell distribution profiles. Results are in agreement with those previously published in the literature. The FitzHugh-Nagumo problem is also efficiently solved and it illustrates very well how dynamic optimization may be used to force a system to evolve from an undesired to a desired pattern with a reduced number of actuators. The presented methodology can be used for the efficient dynamic optimization of

  10. A numerical guide to the solution of the bidomain equations of cardiac electrophysiology

    KAUST Repository

    Pathmanathan, Pras

    2010-06-01

    Simulation of cardiac electrical activity using the bidomain equations can be a massively computationally demanding problem. This study provides a comprehensive guide to numerical bidomain modelling. Each component of bidomain simulations-discretisation, ODE-solution, linear system solution, and parallelisation-is discussed, and previously-used methods are reviewed, new methods are proposed, and issues which cause particular difficulty are highlighted. Particular attention is paid to the choice of stimulus currents, compatibility conditions for the equations, the solution of singular linear systems, and convergence of the numerical scheme. © 2010 Elsevier Ltd.

  11. A numerical guide to the solution of the bidomain equations of cardiac electrophysiology

    KAUST Repository

    Pathmanathan, Pras; Bernabeu, Miguel O.; Bordas, Rafel; Cooper, Jonathan; Garny, Alan; Pitt-Francis, Joe M.; Whiteley, Jonathan P.; Gavaghan, David J.

    2010-01-01

    Simulation of cardiac electrical activity using the bidomain equations can be a massively computationally demanding problem. This study provides a comprehensive guide to numerical bidomain modelling. Each component of bidomain simulations-discretisation, ODE-solution, linear system solution, and parallelisation-is discussed, and previously-used methods are reviewed, new methods are proposed, and issues which cause particular difficulty are highlighted. Particular attention is paid to the choice of stimulus currents, compatibility conditions for the equations, the solution of singular linear systems, and convergence of the numerical scheme. © 2010 Elsevier Ltd.

  12. Predatory publishing and cybercrime targeting academics.

    Science.gov (United States)

    Umlauf, Mary Grace; Mochizuki, Yuki

    2018-04-01

    The purpose of this report is to inform and warn academics about practices used by cybercriminals who seek to profit from unwary scholars and undermine the industry of science. This report describes the signs, symptoms, characteristics, and consequences of predatory publishing and related forms of consumer fraud. Methods to curb these cybercrimes include educating scholars and students about tactics used by predatory publishers; institutional changes in how faculty are evaluated using publications; soliciting cooperation from the industries that support academic publishing and indexing to curb incorporation of illegitimate journals; and taking an offensive position by reporting these consumer fraud crimes to the authorities. Over and above the problem of publishing good science in fraudulent journals, disseminating and citing poor-quality research threaten the credibility of science and of nursing. © 2018 John Wiley & Sons Australia, Ltd.

  13. Free Publishing Culture. Sustainable Models?

    Directory of Open Access Journals (Sweden)

    Silvia Nanclares Escudero

    2013-03-01

    Full Text Available As a result of the collective research on the possibilities for publishing production and distribution offered nowadays by the Free Culture scenario, we present here a mapping of symptoms in order to propose a transitory diagnostic of the question: Is it possible to generate an economically sustainable publishing model based on the uses and customs generated and provided by Free Culture? Data, intuitions, experiences and ideas attempt to back up our affirmative answer.

  14. Numerical Calculation of Transport Based on the Drift-Kinetic Equation for Plasmas in General Toroidal Magnetic Geometry: Numerical Methods; Calculo Numerico de Transporte mediante la Ecuacion Cinetica de Deriva para Plasmas en Geometria Magnetica Toroidal: Metodos Numericos

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, J. M.; Lopez-Bruna, D.

    2009-10-12

    In this report we continue with the description of a newly developed numerical method to solve the drift kinetic equation for ions and electrons in toroidal plasmas. Several numerical aspects, already outlined in a previous report [Informes Tecnicos Ciemat 1165, mayo 2009], will be treated now in more detail. Aside from discussing the method in the context of other existing codes, various aspects will be now explained from the viewpoint of numerical methods: the way to solve convection equations, the adopted boundary conditions, the real-space meshing procedures along with a new software developed to build them, and some additional questions related with the parallelization and the numerical integration. (Author) 16 refs.

  15. Electronic astronomical information handling and flexible publishing.

    Science.gov (United States)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists work and communicate. The concept of electronic information handling encompasses the diverse types of information, the different media, as well as the various communication methodologies and technologies. It ranges from the very collection of data until the final publication of results and sharing of knowledge. New problems and challenges result also from the new information culture, especially on legal, ethical, and educational grounds. Electronic publishing will have to diverge from an electronic version of contributions on paper and will be part of a more general flexible-publishing policy. The benefits of private publishing are questioned. The procedures for validating published material and for evaluating scientific activities will have to be adjusted too. Provision of electronic refereed information independently from commercial publishers in now feasible. Scientists and scientific institutions have now the possibility to run an efficient information server with validated (refereed) material without the help of a commercial publishers.

  16. Ferrofluids: Modeling, numerical analysis, and scientific computation

    Science.gov (United States)

    Tomas, Ignacio

    This dissertation presents some developments in the Numerical Analysis of Partial Differential Equations (PDEs) describing the behavior of ferrofluids. The most widely accepted PDE model for ferrofluids is the Micropolar model proposed by R.E. Rosensweig. The Micropolar Navier-Stokes Equations (MNSE) is a subsystem of PDEs within the Rosensweig model. Being a simplified version of the much bigger system of PDEs proposed by Rosensweig, the MNSE are a natural starting point of this thesis. The MNSE couple linear velocity u, angular velocity w, and pressure p. We propose and analyze a first-order semi-implicit fully-discrete scheme for the MNSE, which decouples the computation of the linear and angular velocities, is unconditionally stable and delivers optimal convergence rates under assumptions analogous to those used for the Navier-Stokes equations. Moving onto the much more complex Rosensweig's model, we provide a definition (approximation) for the effective magnetizing field h, and explain the assumptions behind this definition. Unlike previous definitions available in the literature, this new definition is able to accommodate the effect of external magnetic fields. Using this definition we setup the system of PDEs coupling linear velocity u, pressure p, angular velocity w, magnetization m, and magnetic potential ϕ We show that this system is energy-stable and devise a numerical scheme that mimics the same stability property. We prove that solutions of the numerical scheme always exist and, under certain simplifying assumptions, that the discrete solutions converge. A notable outcome of the analysis of the numerical scheme for the Rosensweig's model is the choice of finite element spaces that allow the construction of an energy-stable scheme. Finally, with the lessons learned from Rosensweig's model, we develop a diffuse-interface model describing the behavior of two-phase ferrofluid flows and present an energy-stable numerical scheme for this model. For a

  17. Numerical analysis

    CERN Document Server

    Scott, L Ridgway

    2011-01-01

    Computational science is fundamentally changing how technological questions are addressed. The design of aircraft, automobiles, and even racing sailboats is now done by computational simulation. The mathematical foundation of this new approach is numerical analysis, which studies algorithms for computing expressions defined with real numbers. Emphasizing the theory behind the computation, this book provides a rigorous and self-contained introduction to numerical analysis and presents the advanced mathematics that underpin industrial software, including complete details that are missing from most textbooks. Using an inquiry-based learning approach, Numerical Analysis is written in a narrative style, provides historical background, and includes many of the proofs and technical details in exercises. Students will be able to go beyond an elementary understanding of numerical simulation and develop deep insights into the foundations of the subject. They will no longer have to accept the mathematical gaps that ex...

  18. Numerical method for the nonlinear Fokker-Planck equation

    International Nuclear Information System (INIS)

    Zhang, D.S.; Wei, G.W.; Kouri, D.J.; Hoffman, D.K.

    1997-01-01

    A practical method based on distributed approximating functionals (DAFs) is proposed for numerically solving a general class of nonlinear time-dependent Fokker-Planck equations. The method relies on a numerical scheme that couples the usual path-integral concept to the DAF idea. The high accuracy and reliability of the method are illustrated by applying it to an exactly solvable nonlinear Fokker-Planck equation, and the method is compared with the accurate K-point Stirling interpolation formula finite-difference method. The approach is also used successfully to solve a nonlinear self-consistent dynamic mean-field problem for which both the cumulant expansion and scaling theory have been found by Drozdov and Morillo [Phys. Rev. E 54, 931 (1996)] to be inadequate to describe the occurrence of a long-lived transient bimodality. The standard interpretation of the transient bimodality in terms of the flat region in the kinetic potential fails for the present case. An alternative analysis based on the effective potential of the Schroedinger-like Fokker-Planck equation is suggested. Our analysis of the transient bimodality is strongly supported by two examples that are numerically much more challenging than other examples that have been previously reported for this problem. copyright 1997 The American Physical Society

  19. Conceptual and numerical models of groundwater flow and solute transport in fracture zones: Application to the Aspo Island (Sweden)

    International Nuclear Information System (INIS)

    Molinero, J.; Samper, J.

    2003-01-01

    Several countries around the world are considering the final disposal of high-level radioactive waste in deep repositories located in fractured granite formations. Evaluating the long term safety of such repositories requires sound conceptual and numerical models which must consider simultaneously groundwater flow, solute transport and chemical and radiological processes. These models are being developed from data and knowledge gained from in situ experiments carried out at deep underground laboratories such as that of Aspo, Sweden, constructed in fractured granite. The Redox Zone Experiment is one of such experiments performed at Aspo in order to evaluate the effects of the construction of the access tunnel on the hydrogeological and hydrochemical conditions of a fracture zone intersected by the tunnel. Previous authors interpreted hydrochemical and isotopic data of this experiment using a mass-balance approach based on a qualitative description of groundwater flow conditions. Such an interpretation, however, is subject to uncertainties related to an over-simplified conceptualization of groundwater flow. Here we present numerical models of groundwater flow and solute transport for this fracture zone. The first model is based on previously published conceptual model. It presents noticeable un consistencies and fails to match simultaneously observed draw downs and chloride breakthrough curves. To overcome its limitations, a revised flow and transport model is presented which relies directly on available hydrodynamic and transport parameters, is based on the identification of appropriate flow and transport boundary conditions and uses, when needed, solute data extrapolated from nearby fracture zones. A significant quantitative improvement is achieved with the revised model because its results match simultaneously drawdown and chloride data. Other improvements are qualitative and include: ensuring consistency of hydrodynamic and hydrochemical data and avoiding

  20. I publish in I edit?--Do editorial board members of urologic journals preferentially publish their own scientific work?

    Science.gov (United States)

    Mani, Jens; Makarević, Jasmina; Juengel, Eva; Ackermann, Hanns; Nelson, Karen; Bartsch, Georg; Haferkamp, Axel; Blaheta, Roman A

    2013-01-01

    Scientists who are members of an editorial board have been accused of preferentially publishing their scientific work in the journal where they serve as editor. Reputation and academic standing do depend on an uninterrupted flow of published scientific work and the question does arise as to whether publication mainly occurs in the self-edited journal. This investigation was designed to determine whether editorial board members of five urological journals were more likely to publish their research reports in their own rather than in other journals. A retrospective analysis was conducted for all original reports published from 2001-2010 by 65 editorial board members nominated to the boards of five impact leading urologic journals in 2006. Publications before editorial board membership, 2001-2005, and publications within the period of time as an editorial board member, 2006-2010, were identified. The impact factors of the journals were also recorded over the time period 2001-2010 to see whether a change in impact factor correlated with publication locality. In the five journals as a whole, scientific work was not preferentially published in the journal in which the scientists served as editor. However, significant heterogeneity among the journals was evident. One journal showed a significant increase in the amount of published papers in the 'own' journal after assumption of editorship, three journals showed no change and one journal showed a highly significant decrease in publishing in the 'own' journal after assumption of editorship.

  1. Content Analyses of Scientific Articles from All Issues Published in Sport Mont Journal in 2009

    Directory of Open Access Journals (Sweden)

    Katarina Dragutunovic

    2018-04-01

    Full Text Available Sport Mont Journal is a print and electronic scientific journal aims to present easy access to the scientific knowledge for sport-conscious individuals using contemporary methods. As one of the most prestigious scientific journals in Montenegro, is published three times a year. The aim of this paper was to classify the articles published in the 2009 journal, by scientific disciplines. On that occasion, we used the method of content analysis. During this period, 95 titles were published, which are classified according to the fields of sports science - biomechanics, physiology, sports medicine, anthropology, methodology, methodology, pedagogy, sociopsychology, anthropomotorics, anthropometry, research in sports and others. It has been found that the most numerous scientific research papers in sport and socio-psychology of sports (30, sport anthropology (25 and sports techniques (13. They show us that in this period a lot of attention was devoted to research in sport and sociopsychology of sports, where personalities, attitudes and characteristics were examined as important determinants of success in sports. In addition to these, there were still many scientific papers from other fields, which cover from social, humanistic and natural sciences. The integration of papers in all areas of sports science is not a simple task, even if we consider this one of the most prestigious journals in this region, the quality of the work itself is crucial.

  2. A combined Importance Sampling and Kriging reliability method for small failure probabilities with time-demanding numerical models

    International Nuclear Information System (INIS)

    Echard, B.; Gayton, N.; Lemaire, M.; Relun, N.

    2013-01-01

    Applying reliability methods to a complex structure is often delicate for two main reasons. First, such a structure is fortunately designed with codified rules leading to a large safety margin which means that failure is a small probability event. Such a probability level is difficult to assess efficiently. Second, the structure mechanical behaviour is modelled numerically in an attempt to reproduce the real response and numerical model tends to be more and more time-demanding as its complexity is increased to improve accuracy and to consider particular mechanical behaviour. As a consequence, performing a large number of model computations cannot be considered in order to assess the failure probability. To overcome these issues, this paper proposes an original and easily implementable method called AK-IS for active learning and Kriging-based Importance Sampling. This new method is based on the AK-MCS algorithm previously published by Echard et al. [AK-MCS: an active learning reliability method combining Kriging and Monte Carlo simulation. Structural Safety 2011;33(2):145–54]. It associates the Kriging metamodel and its advantageous stochastic property with the Importance Sampling method to assess small failure probabilities. It enables the correction or validation of the FORM approximation with only a very few mechanical model computations. The efficiency of the method is, first, proved on two academic applications. It is then conducted for assessing the reliability of a challenging aerospace case study submitted to fatigue.

  3. Preparing and Publishing a Scientific Manuscript

    Directory of Open Access Journals (Sweden)

    Padma R Jirge

    2017-01-01

    Full Text Available Publishing original research in a peer-reviewed and indexed journal is an important milestone for a scientist or a clinician. It is an important parameter to assess academic achievements. However, technical and language barriers may prevent many enthusiasts from ever publishing. This review highlights the important preparatory steps for creating a good manuscript and the most widely used IMRaD (Introduction, Materials and Methods, Results, and Discussion method for writing a good manuscript. It also provides a brief overview of the submission and review process of a manuscript for publishing in a biomedical journal.

  4. Theory and numerics of gravitational waves from preheating after inflation

    International Nuclear Information System (INIS)

    Dufaux, Jean-Francois; Kofman, Lev; Bergman, Amanda; Felder, Gary; Uzan, Jean-Philippe

    2007-01-01

    Preheating after inflation involves large, time-dependent field inhomogeneities, which act as a classical source of gravitational radiation. The resulting spectrum might be probed by direct detection experiments if inflation occurs at a low enough energy scale. In this paper, we develop a theory and algorithm to calculate, analytically and numerically, the spectrum of energy density in gravitational waves produced from an inhomogeneous background of stochastic scalar fields in an expanding universe. We derive some generic analytical results for the emission of gravity waves by stochastic media of random fields, which can test the validity/accuracy of numerical calculations. We contrast our method with other numerical methods in the literature, and then we apply it to preheating after chaotic inflation. In this case, we are able to check analytically our numerical results, which differ significantly from previous works. We discuss how the gravity-wave spectrum builds up with time and find that the amplitude and the frequency of its peak depend in a relatively simple way on the characteristic spatial scale amplified during preheating. We then estimate the peak frequency and amplitude of the spectrum produced in two models of preheating after hybrid inflation, which for some parameters may be relevant for gravity-wave interferometric experiments

  5. EDITORIAL: Roberts Prize for the best paper published in 2010 Roberts Prize for the best paper published in 2010

    Science.gov (United States)

    Webb, Steve; Harris, Simon

    2011-08-01

    The publishers of Physics in Medicine and Biology (PMB), IOP Publishing, in association with the journal owners, the Institute of Physics and Engineering in Medicine (IPEM), jointly award an annual prize for the best paper published in PMB during the previous year. The procedure for deciding the winner has been made as thorough as possible, to try to ensure that an outstanding paper wins the prize. We started off with a shortlist of the 10 research papers published in 2010 which were rated the best based on the referees' quality assessments. Following the submission of a short 'case for winning' document by each of the shortlisted authors, an IPEM college of jurors of the status of FIPEM assessed and rated these 10 papers in order to choose a winner, which was then endorsed by the Editorial Board. We have much pleasure in advising readers that the Roberts Prize for the best paper published in 2010 is awarded to M M Paulides et al from Erasmus MC, Rotterdam, The Netherlands, for their paper on hyperthermia treatment: The clinical feasibility of deep hyperthermia treatment in the head and neck: new challenges for positioning and temperature measurement M M Paulides, J F Bakker, M Linthorst, J van der Zee, Z Rijnen, E Neufeld, P M T Pattynama, P P Jansen, P C Levendag and G C van Rhoon 2010 Phys. Med. Biol. 55 2465 Our congratulations go to these authors. Of course all of the shortlisted papers were of great merit, and the full top-10 is listed below (in alphabetical order). Steve Webb Editor-in-Chief Simon Harris Publisher References Alonzo-Proulx O, Packard N, Boone J M, Al-Mayah A, Brock K K, Shen S Z and Yaffe M J 2010 Validation of a method for measuring the volumetric breast density from digital mammograms Phys. Med. Biol. 55 3027 Bian J, Siewerdsen J H, Han X, Sidky E Y, Prince J L, Pelizzari C A and Pan X 2010 Evaluation of sparse-view reconstruction from flat-panel-detector cone-beam CT Phys. Med. Biol. 55 6575 Brun M-A, Formanek F, Yasuda A, Sekine M, Ando N

  6. Issues in Electronic Publishing.

    Science.gov (United States)

    Meadow, Charles T.

    1997-01-01

    Discusses issues related to electronic publishing. Topics include writing; reading; production, distribution, and commerce; copyright and ownership of intellectual property; archival storage; technical obsolescence; control of content; equality of access; and cultural changes. (Author/LRW)

  7. Structure and navigation for electronic publishing

    Science.gov (United States)

    Tillinghast, John; Beretta, Giordano B.

    1998-01-01

    The sudden explosion of the World Wide Web as a new publication medium has given a dramatic boost to the electronic publishing industry, which previously was a limited market centered around CD-ROMs and on-line databases. While the phenomenon has parallels to the advent of the tabloid press in the middle of last century, the electronic nature of the medium brings with it the typical characteristic of 4th wave media, namely the acceleration in its propagation speed and the volume of information. Consequently, e-publications are even flatter than print media; Shakespeare's Romeo and Juliet share the same computer screen with a home-made plagiarized copy of Deep Throat. The most touted tool for locating useful information on the World Wide Web is the search engine. However, due to the medium's flatness, sought information is drowned in a sea of useless information. A better solution is to build tools that allow authors to structure information so that it can easily be navigated. We experimented with the use of ontologies as a tool to formulate structures for information about a specific topic, so that related concepts are placed in adjacent locations and can easily be navigated using simple and ergonomic user models. We describe our effort in building a World Wide Web based photo album that is shared among a small network of people.

  8. New journals for publishing medical case reports.

    Science.gov (United States)

    Akers, Katherine G

    2016-04-01

    Because they do not rank highly in the hierarchy of evidence and are not frequently cited, case reports describing the clinical circumstances of single patients are seldom published by medical journals. However, many clinicians argue that case reports have significant educational value, advance medical knowledge, and complement evidence-based medicine. Over the last several years, a vast number (∼160) of new peer-reviewed journals have emerged that focus on publishing case reports. These journals are typically open access and have relatively high acceptance rates. However, approximately half of the publishers of case reports journals engage in questionable or "predatory" publishing practices. Authors of case reports may benefit from greater awareness of these new publication venues as well as an ability to discriminate between reputable and non-reputable journal publishers.

  9. Electronic Publishing: Introduction to This Issue.

    Science.gov (United States)

    Siegel, Martin A.

    1994-01-01

    Provides an overview of this special issue that addresses the possibilities and implications of electronic publishing and information dissemination as key components of effective education. Highlights include the theory and framework of electronic publishing; differences between electronic text and print; development of new educational materials;…

  10. "Are you gonna publish that?" Peer-reviewed publication outcomes of doctoral dissertations in psychology.

    Directory of Open Access Journals (Sweden)

    Spencer C Evans

    Full Text Available If a doctoral dissertation represents an original investigation that makes a contribution to one's field, then dissertation research could, and arguably should, be disseminated into the scientific literature. However, the extent and nature of dissertation publication remains largely unknown within psychology. The present study investigated the peer-reviewed publication outcomes of psychology dissertation research in the United States. Additionally, we examined publication lag, scientific impact, and variations across subfields. To investigate these questions, we first drew a stratified random cohort sample of 910 psychology Ph.D. dissertations from ProQuest Dissertations & Theses. Next, we conducted comprehensive literature searches for peer-reviewed journal articles derived from these dissertations published 0-7 years thereafter. Published dissertation articles were coded for their bibliographic details, citation rates, and journal impact metrics. Results showed that only one-quarter (25.6% [95% CI: 23.0, 28.4] of dissertations were ultimately published in peer-reviewed journals, with significant variations across subfields (range: 10.1 to 59.4%. Rates of dissertation publication were lower in professional/applied subfields (e.g., clinical, counseling compared to research/academic subfields (e.g., experimental, cognitive. When dissertations were published, however, they often appeared in influential journals (e.g., Thomson Reuters Impact Factor M = 2.84 [2.45, 3.23], 5-year Impact Factor M = 3.49 [3.07, 3.90] and were cited numerous times (Web of Science citations per year M = 3.65 [2.88, 4.42]. Publication typically occurred within 2-3 years after the dissertation year. Overall, these results indicate that the large majority of Ph.D. dissertation research in psychology does not get disseminated into the peer-reviewed literature. The non-publication of dissertation research appears to be a systemic problem affecting both research and training

  11. EDITORIAL: Roberts Prize for the best paper published in 2009 Roberts Prize for the best paper published in 2009

    Science.gov (United States)

    Webb, Steve; Harris, Simon

    2010-07-01

    The publishers of Physics in Medicine and Biology (PMB), IOP Publishing, in association with the journal owners, the Institute of Physics and Engineering in Medicine (IPEM), jointly award an annual prize for the best paper published in PMB during the previous year. The procedure for deciding the winner has been made as thorough as possible, to try to ensure that an outstanding paper wins the prize. We started off with a shortlist of the 10 research papers published in 2009 which were rated the best based on the referees' quality assessments. Following the submission of a short 'case for winning' document by each of the shortlisted authors, an IPEM college of jurors of the status of FIPEM assessed and rated these 10 papers in order to choose a winner, which was then endorsed by the Editorial Board. We have a clear, and very worthy, winner this year. We have much pleasure in advising readers that the 2009 Roberts Prize is awarded to E Z Zhang et al from University College London for their paper on photoacoustic tomography. In vivo high resolution 3D photoacoustic imaging of superficial vascular anatomy E Z Zhang, J G Laufer, R B Pedley and P C Beard 2009 Phys. Med. Biol. 54 1035-46 Our congratulations go to these authors. Of course all of the shortlisted papers were of great merit, and the full top-10 is listed below (in alphabetical order). Steve Webb Editor-in-Chief Simon Harris Publisher References Cheng Y-C N , Neelavalli J and Haacke E M 2009 Limitations of calculating field distributions and magnetic susceptibilities in MRI using a Fourier based method Phys. Med. Biol. 54 1169-89 Cho S, Ahn S, Li Q and Leahy R M 2009 Exact and approximate Fourier rebinning of PET data from time-of-flight to non time-of-flight 2009 Phys. Med. Biol. 54 467-84 Davidson S R H, Weersink R A, Haider M A, Gertner M R, Bogaards A, Giewercer D, Scherz A, Sherar M D, Elhilali M, Chin J L, Trachtenberg J and Wilson B C 2009 Treatment planning and dose analysis for interstitial

  12. Sisyphus desperately seeking publisher

    Indian Academy of Sciences (India)

    Antoinette Molinié

    The editors wield their Olympian authority by making today's scientists endlessly push their weighty boulders up ... since publishing has become a highly lucrative business. ... estimate that the richest 8.4 % own 83.3 % (see Global Wealth.

  13. Desktop Publishing in Libraries.

    Science.gov (United States)

    Cisler, Steve

    1987-01-01

    Describes the components, costs, and capabilities of several desktop publishing systems, and examines their possible impact on work patterns within organizations. The text and graphics of the article were created using various microcomputer software packages. (CLB)

  14. Web-based magazine design for self publishers

    Science.gov (United States)

    Hunter, Andrew; Slatter, David; Greig, Darryl

    2011-03-01

    Short run printing technology and web services such as MagCloud provide new opportunities for long-tail magazine publishing. They enable self publishers to supply magazines to a wide range of communities, including groups that are too small to be viable as target communities for conventional publishers. In a Web 2.0 world where users constantly discover new services and where they may be infrequent patrons of any single service, it is unreasonable to expect users to learn the complex service behaviors. Furthermore, we want to open up publishing opportunities to novices who are unlikely to have prior experience of publishing and who lack design expertise. Magazine design automation is an ambitious goal, but recent progress with another web service, Autophotobook, proves that some level of automation of publication design is feasible. This paper describes our current research effort to extend the automation capabilities of Autophotobook to address the issues of magazine design so that we can provide a service to support professional-quality self publishing by novice users for a wide range of community types and sizes.

  15. [Relationship between previous severity of illness and outcome of in-hospital cardiac arrest].

    Science.gov (United States)

    Serrano, M; Rodríguez, J; Espejo, A; del Olmo, R; Llanos, S; Del Castillo, J; López-Herce, J

    2014-07-01

    To analyze the relationship between previous severity of illness, lactic acid, creatinine and inotropic index with mortality of in-hospital cardiac arrest (CA) in children, and the value of a prognostic index designed for adults. The study included total of 44 children aged from 1 month to 18 years old who suffered a cardiac arrest while in hospital. The relationship between previous severity of illness scores (PRIMS and PELOD), lactic acid, creatinine, treatment with vasoactive drugs, inotropic index with return of spontaneous circulation and survival at hospital discharge was analyzed. The large majority (90.3%) of patients had a return of spontaneous circulation, and 59% survived at hospital discharge. More than two-thirds (68.2%) were treated with inotropic drugs at the time of the CA. The patients who died had a higher lactic acid before the CA (3.4 mmol/L) than survivors (1.4 mmol/L), P=.04. There were no significant differences in PRIMS, PELOD, creatinine, inotropic drugs, and inotropic index before CA between patients who died and survivors. A high lactic acid previous to cardiac arrest could be a prognostic factor of in-hospital cardiac arrest in children. Copyright © 2013 Asociación Española de Pediatría. Published by Elsevier Espana. All rights reserved.

  16. Numerical simulation and experimental validation of coiled adiabatic capillary tubes

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Valladares, O. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico (UNAM), Apdo. Postal 34, 62580 Temixco, Morelos (Mexico)

    2007-04-15

    The objective of this study is to extend and validate the model developed and presented in previous works [O. Garcia-Valladares, C.D. Perez-Segarra, A. Oliva, Numerical simulation of capillary tube expansion devices behaviour with pure and mixed refrigerants considering metastable region. Part I: mathematical formulation and numerical model, Applied Thermal Engineering 22 (2) (2002) 173-182; O. Garcia-Valladares, C.D. Perez-Segarra, A. Oliva, Numerical simulation of capillary tube expansion devices behaviour with pure and mixed refrigerants considering metastable region. Part II: experimental validation and parametric studies, Applied Thermal Engineering 22 (4) (2002) 379-391] to coiled adiabatic capillary tube expansion devices working with pure and mixed refrigerants. The discretized governing equations are coupled using an implicit step by step method. A special treatment has been implemented in order to consider transitions (subcooled liquid region, metastable liquid region, metastable two-phase region and equilibrium two-phase region). All the flow variables (enthalpies, temperatures, pressures, vapor qualities, velocities, heat fluxes, etc.) together with the thermophysical properties are evaluated at each point of the grid in which the domain is discretized. The numerical model allows analysis of aspects such as geometry, type of fluid (pure substances and mixtures), critical or non-critical flow conditions, metastable regions, and transient aspects. Comparison of the numerical simulation with a wide range of experimental data presented in the technical literature will be shown in the present article in order to validate the model developed. (author)

  17. Desktop Publishing for the Gifted/Talented.

    Science.gov (United States)

    Hamilton, Wayne

    1987-01-01

    Examines the nature of desktop publishing and how it can be used in the classroom for gifted/talented students. Characteristics and special needs of such students are identified, and it is argued that desktop publishing addresses those needs, particularly with regard to creativity. Twenty-six references are provided. (MES)

  18. Publishers' Sales Strategies: A Questionable Business.

    Science.gov (United States)

    Eaglen, Audrey B.

    1988-01-01

    Speed, fill rate, and discount are reasons why it is often preferable for libraries to order directly from publishers rather than through a distributor. Nevertheless, some publishers have decided not to accept orders from libraries and schools. This has had a deleterious effect on libraries and library collections. (MES)

  19. The Library as Publisher.

    Science.gov (United States)

    Field, Roy

    1979-01-01

    Presents a guide to for-profit library publishing of reprints, original manuscripts, and smaller items. Discussed are creation of a publications panel to manage finances and preparation, determining prices of items, and drawing up author contracts. (SW)

  20. Short communications published online in the British Journal of Oral and Maxillofacial Surgery during 2010-2011.

    Science.gov (United States)

    Colbert, S; Southorn, B; Rosenbaum, G; Aldridge, T; Brennan, P A

    2012-09-01

    The British Journal of Oral and Maxillofacial Surgery (BJOMS) publishes many types of papers including original articles, review articles, and short communications. Many of the latter are isolated case reports of rare or interesting diseases or of difficult or unexpected complications. While case reports are sometimes considered to be of little educational or clinical value, and as such do little to advance medical knowledge, they do have an important role, and many trainees begin their publishing careers writing such papers. There is increasing pressure for space in paper medical journals and, for this reason, some journals either limit or do not publish short publications in print copy but instead put them online. Using established criteria, we previously evaluated all 142 short communications published in the BJOMS during 2008-2009 and found that 48% of them had little or no educational value. As a result, the editorial board of BJOMS took the decision to publish most short communications online only. We have now analysed 48 short communications that were published online only during 2010-2011. Most (80%) were single case reports that covered virtually the whole remit of the specialty, and over half (56%) were published by authors based in the UK. While many of these papers did not add important new information to existing knowledge, these types of article are clearly of value both for trainees and for experienced surgeons. We think that these should continue to be supported as, in addition to their educational value, they are an excellent way for trainees to start to write. Copyright © 2012 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  1. Electronic publishing and intelligent information retrieval

    Science.gov (United States)

    Heck, A.

    1992-01-01

    Europeans are now taking steps to homogenize policies and standardize procedures in electronic publishing (EP) in astronomy and space sciences. This arose from an open meeting organized in Oct. 1991 at Strasbourg Observatory (France) and another business meeting held late Mar. 1992 with the major publishers and journal editors in astronomy and space sciences. The ultimate aim of EP might be considered as the so-called 'intelligent information retrieval' (IIR) or better named 'advanced information retrieval' (AIR), taking advantage of the fact that the material to be published appears at some stage in a machine-readable form. It is obvious that the combination of desktop and electronic publishing with networking and new structuring of knowledge bases will profoundly reshape not only our ways of publishing, but also our procedures of communicating and retrieving information. It should be noted that a world-wide survey among astronomers and space scientists carried out before the October 1991 colloquium on the various packages and machines used, indicated that TEX-related packages were already in majoritarian use in our community. It has also been stressed at each meeting that the European developments should be carried out in collaboration with what is done in the US (STELLAR project, for instance). American scientists and journal editors actually attended both meetings mentioned above. The paper will offer a review of the status of electronic publishing in astronomy and its possible contribution to advanced information retrieval in this field. It will also report on recent meetings such as the 'Astronomy from Large Databases-2 (ALD-2)' conference dealing with the latest developments in networking, in data, information, and knowledge bases, as well as in the related methodologies.

  2. Survival of dental implants placed in sites of previously failed implants.

    Science.gov (United States)

    Chrcanovic, Bruno R; Kisch, Jenö; Albrektsson, Tomas; Wennerberg, Ann

    2017-11-01

    To assess the survival of dental implants placed in sites of previously failed implants and to explore the possible factors that might affect the outcome of this reimplantation procedure. Patients that had failed dental implants, which were replaced with the same implant type at the same site, were included. Descriptive statistics were used to describe the patients and implants; survival analysis was also performed. The effect of systemic, environmental, and local factors on the survival of the reoperated implants was evaluated. 175 of 10,096 implants in 98 patients were replaced by another implant at the same location (159, 14, and 2 implants at second, third, and fourth surgeries, respectively). Newly replaced implants were generally of similar diameter but of shorter length compared to the previously placed fixtures. A statistically significant greater percentage of lost implants were placed in sites with low bone quantity. There was a statistically significant difference (P = 0.032) in the survival rates between implants that were inserted for the first time (94%) and implants that replaced the ones lost (73%). There was a statistically higher failure rate of the reoperated implants for patients taking antidepressants and antithrombotic agents. Dental implants replacing failed implants had lower survival rates than the rates reported for the previous attempts of implant placement. It is suggested that a site-specific negative effect may possibly be associated with this phenomenon, as well as the intake of antidepressants and antithrombotic agents. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  3. Numerical Development

    Science.gov (United States)

    Siegler, Robert S.; Braithwaite, David W.

    2016-01-01

    In this review, we attempt to integrate two crucial aspects of numerical development: learning the magnitudes of individual numbers and learning arithmetic. Numerical magnitude development involves gaining increasingly precise knowledge of increasing ranges and types of numbers: from non-symbolic to small symbolic numbers, from smaller to larger…

  4. Numerical investigation of fluid flow and heat transfer under high heat flux using rectangular micro-channels

    KAUST Repository

    Mansoor, Mohammad M.

    2012-02-01

    A 3D-conjugate numerical investigation was conducted to predict heat transfer characteristics in a rectangular cross-sectional micro-channel employing simultaneously developing single-phase flows. The numerical code was validated by comparison with previous experimental and numerical results for the same micro-channel dimensions and classical correlations based on conventional sized channels. High heat fluxes up to 130W/cm 2 were applied to investigate micro-channel thermal characteristics. The entire computational domain was discretized using a 120×160×100 grid for the micro-channel with an aspect ratio of (α=4.56) and examined for Reynolds numbers in the laminar range (Re 500-2000) using FLUENT. De-ionized water served as the cooling fluid while the micro-channel substrate used was made of copper. Validation results were found to be in good agreement with previous experimental and numerical data [1] with an average deviation of less than 4.2%. As the applied heat flux increased, an increase in heat transfer coefficient values was observed. Also, the Reynolds number required for transition from single-phase fluid to two-phase was found to increase. A correlation is proposed for the results of average Nusselt numbers for the heat transfer characteristics in micro-channels with simultaneously developing, single-phase flows. © 2011 Elsevier Ltd.

  5. Where is smoking research published?

    Science.gov (United States)

    Liguori, A.; Hughes, J. R.

    1996-01-01

    OBJECTIVE: To identify journals that have a focus on human nicotine/smoking research and to investigate the coverage of smoking in "high-impact" journals. DESIGN: The MEDLINE computer database was searched for English-language articles on human studies published in 1988-1992 using "nicotine", "smoking", "smoking cessation", "tobacco", or "tobacco use disorder" as focus descriptors. This search was supplemented with a similar search of the PSYCLIT computer database. Fifty-eight journals containing at least 20 nicotine/smoking articles over the five years were analysed for impact factor (IF; citations per article). RESULTS: Among the journals with the highest percentage of nicotine- or smoking-focused articles (that is, 9-39% of their articles were on nicotine/smoking), Addiction, American Journal of Public Health, Cancer Causes and Control, Health Psychology, and Preventive Medicine had the greatest IF (range = 1.3-2.6). Among the journals highest in impact factor (IF > 3), only American Journal of Epidemiology, American Review of Respiratory Disease, Journal of the National Cancer Institute, and Journal of the American Medical Association published more than 10 nicotine/smoking articles per year (3-5% of all articles). Of these, only Journal of the American Medical Association published a large number of nicotine/smoking articles (32 per year). CONCLUSIONS: Although smoking causes 20% of all mortality in developed countries, the topic is not adequately covered in high-impact journals. Most smoking research is published in low-impact journals. 




 PMID:8795857

  6. Mergers, Acquisitions, and Access: STM Publishing Today

    Science.gov (United States)

    Robertson, Kathleen

    Electronic publishing is changing the fundamentals of the entire printing/delivery/archive system that has served as the distribution mechanism for scientific research over the last century and a half. The merger-mania of the last 20 years, preprint pools, and publishers' licensing and journals-bundling plans are among the phenomena impacting the scientific information field. Science-Technology-Medical (STM) publishing is experiencing a period of intense consolidation and reorganization. This paper gives an overview of the economic factors fueling these trends, the major STM publishers, and the government regulatory bodies that referee this industry in Europe, Canada, and the USA.

  7. The Ins and the Outs of Electronic Publishing.

    Science.gov (United States)

    Wills, Mathew; Wills, Gordon

    1996-01-01

    Examines electronic publishing for academic and professional publishers. Discusses benefits of electronic publishing to authors and readers, argues that the hard sell and product-driven mindsets will not work in a customer-focused communications medium, and outlines characteristics of electronic publishing that must be incorporated in successful…

  8. [SciELO: method for electronic publishing].

    Science.gov (United States)

    Laerte Packer, A; Rocha Biojone, M; Antonio, I; Mayumi Takemaka, R; Pedroso García, A; Costa da Silva, A; Toshiyuki Murasaki, R; Mylek, C; Carvalho Reisl, O; Rocha F Delbucio, H C

    2001-01-01

    It describes the SciELO Methodology Scientific Electronic Library Online for electronic publishing of scientific periodicals, examining issues such as the transition from traditional printed publication to electronic publishing, the scientific communication process, the principles which founded the methodology development, its application in the building of the SciELO site, its modules and components, the tools use for its construction etc. The article also discusses the potentialities and trends for the area in Brazil and Latin America, pointing out questions and proposals which should be investigated and solved by the methodology. It concludes that the SciELO Methodology is an efficient, flexible and wide solution for the scientific electronic publishing.

  9. 20 CFR 902.3 - Published information.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Published information. 902.3 Section 902.3 Employees' Benefits JOINT BOARD FOR THE ENROLLMENT OF ACTUARIES RULES REGARDING AVAILABILITY OF INFORMATION § 902.3 Published information. (a) Federal Register. Pursuant to sections 552 and 553 of title 5 of the...

  10. Numerical Optimization in Microfluidics

    DEFF Research Database (Denmark)

    Jensen, Kristian Ejlebjærg

    2017-01-01

    Numerical modelling can illuminate the working mechanism and limitations of microfluidic devices. Such insights are useful in their own right, but one can take advantage of numerical modelling in a systematic way using numerical optimization. In this chapter we will discuss when and how numerical...... optimization is best used....

  11. Twelve previously unknown phage genera are ubiquitous in global oceans.

    Science.gov (United States)

    Holmfeldt, Karin; Solonenko, Natalie; Shah, Manesh; Corrier, Kristen; Riemann, Lasse; Verberkmoes, Nathan C; Sullivan, Matthew B

    2013-07-30

    Viruses are fundamental to ecosystems ranging from oceans to humans, yet our ability to study them is bottlenecked by the lack of ecologically relevant isolates, resulting in "unknowns" dominating culture-independent surveys. Here we present genomes from 31 phages infecting multiple strains of the aquatic bacterium Cellulophaga baltica (Bacteroidetes) to provide data for an underrepresented and environmentally abundant bacterial lineage. Comparative genomics delineated 12 phage groups that (i) each represent a new genus, and (ii) represent one novel and four well-known viral families. This diversity contrasts the few well-studied marine phage systems, but parallels the diversity of phages infecting human-associated bacteria. Although all 12 Cellulophaga phages represent new genera, the podoviruses and icosahedral, nontailed ssDNA phages were exceptional, with genomes up to twice as large as those previously observed for each phage type. Structural novelty was also substantial, requiring experimental phage proteomics to identify 83% of the structural proteins. The presence of uncommon nucleotide metabolism genes in four genera likely underscores the importance of scavenging nutrient-rich molecules as previously seen for phages in marine environments. Metagenomic recruitment analyses suggest that these particular Cellulophaga phages are rare and may represent a first glimpse into the phage side of the rare biosphere. However, these analyses also revealed that these phage genera are widespread, occurring in 94% of 137 investigated metagenomes. Together, this diverse and novel collection of phages identifies a small but ubiquitous fraction of unknown marine viral diversity and provides numerous environmentally relevant phage-host systems for experimental hypothesis testing.

  12. Laparoscopy After Previous Laparotomy

    Directory of Open Access Journals (Sweden)

    Zulfo Godinjak

    2006-11-01

    Full Text Available Following the abdominal surgery, extensive adhesions often occur and they can cause difficulties during laparoscopic operations. However, previous laparotomy is not considered to be a contraindication for laparoscopy. The aim of this study is to present that an insertion of Veres needle in the region of umbilicus is a safe method for creating a pneumoperitoneum for laparoscopic operations after previous laparotomy. In the last three years, we have performed 144 laparoscopic operations in patients that previously underwent one or two laparotomies. Pathology of digestive system, genital organs, Cesarean Section or abdominal war injuries were the most common causes of previouslaparotomy. During those operations or during entering into abdominal cavity we have not experienced any complications, while in 7 patients we performed conversion to laparotomy following the diagnostic laparoscopy. In all patients an insertion of Veres needle and trocar insertion in the umbilical region was performed, namely a technique of closed laparoscopy. Not even in one patient adhesions in the region of umbilicus were found, and no abdominal organs were injured.

  13. Behind the Spam: A ``Spectral Analysis'' of Predatory Publishers

    Science.gov (United States)

    Beall, Jeffrey

    2016-10-01

    Most researchers today are bombarded with spam email solicitations from questionable scholarly publishers. These emails solicit article manuscripts, editorial board service, and even ad hoc peer reviews. These ``predatory'' publishers exploit the scholarly publishing process, patterning themselves after legitimate scholarly publishers yet performing little or no peer review and quickly accepting submitted manuscripts and collecting fees from submitting authors. These counterfeit publishers and journals have published much junk science? especially in the field of cosmology? threatening the integrity of the academic record. This paper examines the current state of predatory publishing and advises researchers how to navigate scholarly publishing to best avoid predatory publishers and other scholarly publishing-related perils.

  14. Hindi Numerals.

    Science.gov (United States)

    Bright, William

    In most languages encountered by linguists, the numerals, considered as a paradigmatic set, constitute a morpho-syntactic problem of only moderate complexity. The Indo-Aryan language family of North India, however, presents a curious contrast. The relatively regular numeral system of Sanskrit, as it has developed historically into the modern…

  15. Structural revision of some recently published iridoid glucosides.

    Science.gov (United States)

    Jensen, Søren R; Caliş, Ihsan; Gotfredsen, Charlotte H; Søtofte, Inger

    2007-01-01

    The structures of six different iridoid glucosides have been revised. Three compounds isolated from Eremostachys glabra and designated 6,9-epi-8-O-acetylshanziside (1), 5,9-epi-penstemoside (2), and 5,9-epi-7,8-didehydropenstemoside (3) have been shown to be identical to the known iridoids barlerin (4, 8-O-acetylshanziside), penstemoside (5), and 7,8-didehydropenstemoside (6), respectively. Another compound named harpagoside-B, isolated from Scrophularia deserti and proposed to be 9-epi-6-O-methylharpagoside (11), was demonstrated from the spectroscopic data given to be the known harpagoside (10b). Finally, two alleged iridoid galactosides from Buddleja crispa named buddlejosides A and B (12a and 12b) have been shown to be the corresponding glucosides; the former is identical to agnuside (13a), while the latter is 3,4-dihydroxybenzoylaucubin (13b), an iridoid glucoside not previously published. This clearly showed that care should be taken with the interpretation of NOEs involving bridgehead protons in iridoid structures because they can be capricious and lead to erroneous structural assignments.

  16. Music Consumption and Publishing in Todays Music Industry : Music publishing for an independent record label

    OpenAIRE

    Pienimäki, Kristian

    2015-01-01

    For the last two decades the changes in music technology and music consumption have affected music publishing as well as its viability. Much due to music digitalization and the overall decline in physical sales, the music industry has been forced to re-evaluate the means of publishing. The topic of the thesis is of current interest since the music industry is still in the state of change and new research is important. The thesis was assigned by an independent record label called Meiän Mu...

  17. Methods of numerical relativity

    International Nuclear Information System (INIS)

    Piran, T.

    1983-01-01

    Numerical Relativity is an alternative to analytical methods for obtaining solutions for Einstein equations. Numerical methods are particularly useful for studying generation of gravitational radiation by potential strong sources. The author reviews the analytical background, the numerical analysis aspects and techniques and some of the difficulties involved in numerical relativity. (Auth.)

  18. Numerical calculation of velocity distribution near a vertical flat plate immersed in bubble flow

    International Nuclear Information System (INIS)

    Matsuura, Akihiro; Nakamura, Hajime; Horihata, Hideyuki; Hiraoka, Setsuro; Aragaki, Tsutomu; Yamada, Ikuho; Isoda, Shinji.

    1992-01-01

    Liquid and gas velocity distributions for bubble flow near a vertical flat plate were calculated numerically by using the SIMPLER method, where the flow was assumed to be laminar, two-dimensional, and at steady state. The two-fluid flow model was used in the numerical analysis. To calculate the drag force on a small bubble, Stokes' law for a rigid sphere is applicable. The dimensionless velocity distributions which were arranged with characteristic boundary layer thickness and maximum liquid velocity were adjusted with a single line and their forms were similar to that for single-phase wall-jet flow. The average wall shear stress derived from the velocity gradient at the plate wall was strongly affected by bubble diameter but not by inlet liquid velocity. The present dimensionless velocity distributions obtained numerically agreed well with previous experimental results, and the proposed numerical algorithm was validated. (author)

  19. Scientific publishing: some food for thought

    Directory of Open Access Journals (Sweden)

    Vittorio Bo

    2007-03-01

    Full Text Available Scientific publishing, here to be considered in a broader sense, as publishing of both specialised scientific journals and science popularisation works addressed to a wider audience, has been sailing for some years on troubled waters. To gather some possible food for thought is the purpose of this brief article.

  20. Publisher Correction: Invisible Trojan-horse attack

    DEFF Research Database (Denmark)

    Sajeed, Shihan; Minshull, Carter; Jain, Nitin

    2017-01-01

    A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.......A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper....

  1. Numerical tackling for viscoelastic fluid flow in rotating frame considering homogeneous-heterogeneous reactions

    Directory of Open Access Journals (Sweden)

    Najwa Maqsood

    Full Text Available This study provides a numerical treatment for rotating flow of viscoelastic (Maxwell fluid bounded by a linearly deforming elastic surface. Mass transfer analysis is carried out in the existence of homogeneous-heterogeneous reactions. By means of usual transformation, the governing equations are changed into global similarity equations which have been tackled by an expedient shooting approach. A contemporary numerical routine bvp4c of software MATLAB is also opted to develop numerical approximations. Both methods of solution are found in complete agreement in all the cases. Velocity and concentration profiles are computed and elucidated for certain range of viscoelastic fluid parameter. The solutions contain a rotation-strength parameter λ that has a considerable impact on the flow fields. For sufficiently large value of λ, the velocity fields are oscillatory decaying function of the non-dimensional vertical distance. Concentration distribution at the surface is found to decrease upon increasing the strengths of chemical reactions. A comparison of present computations is made with those of already published ones and such comparison appears convincing. Keywords: Maxwell fluid, Similarity solution, Numerical method, Chemical reaction, Stretching sheet

  2. Open Access Publishing: What Authors Want

    Science.gov (United States)

    Nariani, Rajiv; Fernandez, Leila

    2012-01-01

    Campus-based open access author funds are being considered by many academic libraries as a way to support authors publishing in open access journals. Article processing fees for open access have been introduced recently by publishers and have not yet been widely accepted by authors. Few studies have surveyed authors on their reasons for publishing…

  3. 22 CFR 212.11 - Materials to be published.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Materials to be published. 212.11 Section 212... Federal Register § 212.11 Materials to be published. (a) USAID separately states and currently publishes... section. (b) USAID Public Notice No. 1 and the USAID Regulations published in chapter II of Title 22 and...

  4. SENR /NRPy + : Numerical relativity in singular curvilinear coordinate systems

    Science.gov (United States)

    Ruchlin, Ian; Etienne, Zachariah B.; Baumgarte, Thomas W.

    2018-03-01

    We report on a new open-source, user-friendly numerical relativity code package called SENR /NRPy + . Our code extends previous implementations of the BSSN reference-metric formulation to a much broader class of curvilinear coordinate systems, making it ideally suited to modeling physical configurations with approximate or exact symmetries. In the context of modeling black hole dynamics, it is orders of magnitude more efficient than other widely used open-source numerical relativity codes. NRPy + provides a Python-based interface in which equations are written in natural tensorial form and output at arbitrary finite difference order as highly efficient C code, putting complex tensorial equations at the scientist's fingertips without the need for an expensive software license. SENR provides the algorithmic framework that combines the C codes generated by NRPy + into a functioning numerical relativity code. We validate against two other established, state-of-the-art codes, and achieve excellent agreement. For the first time—in the context of moving puncture black hole evolutions—we demonstrate nearly exponential convergence of constraint violation and gravitational waveform errors to zero as the order of spatial finite difference derivatives is increased, while fixing the numerical grids at moderate resolution in a singular coordinate system. Such behavior outside the horizons is remarkable, as numerical errors do not converge to zero near punctures, and all points along the polar axis are coordinate singularities. The formulation addresses such coordinate singularities via cell-centered grids and a simple change of basis that analytically regularizes tensor components with respect to the coordinates. Future plans include extending this formulation to allow dynamical coordinate grids and bispherical-like distribution of points to efficiently capture orbiting compact binary dynamics.

  5. Open Access Publishing in Particle Physics

    CERN Document Server

    2007-01-01

    Particle Physics, often referred to as High Energy Physics (HEP), spearheaded the Open Access dissemination of scientific results with the mass mailing of preprints in the pre-Web era and with the launch of the arXiv preprint system at the dawn of the '90s. The HEP community is now ready for a further push to Open Access while retaining all the advantages of the peerreview system and, at the same time, bring the spiralling cost of journal subscriptions under control. I will present a plan for the conversion to Open Access of HEP peer-reviewed journals, through a consortium of HEP funding agencies, laboratories and libraries: SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics). SCOAP3 will engage with scientific publishers towards building a sustainable model for Open Access publishing, which is as transparent as possible for HEP authors. The current system in which journals income comes from subscription fees is replaced with a scheme where SCOAP3 compensates publishers for the costs...

  6. Standardized mortality in eating disorders--a quantitative summary of previously published and new evidence

    DEFF Research Database (Denmark)

    Nielsen, Søren; Møller-Madsen, S.; Isager, Torben

    2011-01-01

    strong evidence for an increase in SMR for anorexia nervosa (AN), whereas no firm conclusions could be drawn for bulimia nervosa (BN). Bias caused by loss to follow-up was quantified and found non-negligable in some samples (possible increase in SMR from 25% to 240%). We did not find a significant effect...

  7. Standardized mortality in eating disorders--a quantitative summary of previously published and new evidence

    DEFF Research Database (Denmark)

    Nielsen, Søren; Møller-Madsen, S.; Isager, Torben

    1998-01-01

    strong evidence for an increase in SMR for anorexia nervosa (AN), whereas no firm conclusions could be drawn for bulimia nervosa (BN). Bias caused by loss to follow-up was quantified and found non-negligable in some samples (possible increase in SMR from 25% to 240%). We did not find a significant effect...

  8. Behind the Spam: A "Spectral Analysis" of Predatory Publishers

    Science.gov (United States)

    Beall, Jeffrey

    2015-08-01

    Most researchers today are bombarded with spam email solicitations from questionable scholarly publishers. These emails solicit article manuscripts, editorial board service, and even ad hoc peer reviews. These "predatory" publishers exploit the scholarly publishing process, patterning themselves after legitimate scholarly publishers yet performing little or no peer review and quickly accepting submitted manuscripts and collecting fees from submitting authors. These counterfeit publishers and journals have published much junk science — especially in the field of cosmology — threatening the integrity of the academic record. This presentation examines the current state of predatory publishing and related scams such as fake impact factors and advises researchers how to navigate scholarly publishing to best avoid predatory publishers and other scholarly publishing-related perils.

  9. Consistent constitutive modeling of metallic target penetration using empirical, analytical, and numerical penetration models

    Directory of Open Access Journals (Sweden)

    John (Jack P. Riegel III

    2016-04-01

    Full Text Available Historically, there has been little correlation between the material properties used in (1 empirical formulae, (2 analytical formulations, and (3 numerical models. The various regressions and models may each provide excellent agreement for the depth of penetration into semi-infinite targets. But the input parameters for the empirically based procedures may have little in common with either the analytical model or the numerical model. This paper builds on previous work by Riegel and Anderson (2014 to show how the Effective Flow Stress (EFS strength model, based on empirical data, can be used as the average flow stress in the analytical Walker–Anderson Penetration model (WAPEN (Anderson and Walker, 1991 and how the same value may be utilized as an effective von Mises yield strength in numerical hydrocode simulations to predict the depth of penetration for eroding projectiles at impact velocities in the mechanical response regime of the materials. The method has the benefit of allowing the three techniques (empirical, analytical, and numerical to work in tandem. The empirical method can be used for many shot line calculations, but more advanced analytical or numerical models can be employed when necessary to address specific geometries such as edge effects or layering that are not treated by the simpler methods. Developing complete constitutive relationships for a material can be costly. If the only concern is depth of penetration, such a level of detail may not be required. The effective flow stress can be determined from a small set of depth of penetration experiments in many cases, especially for long penetrators such as the L/D = 10 ones considered here, making it a very practical approach. In the process of performing this effort, the authors considered numerical simulations by other researchers based on the same set of experimental data that the authors used for their empirical and analytical assessment. The goals were to establish a

  10. A Numerical Instability in an ADI Algorithm for Gyrokinetics

    International Nuclear Information System (INIS)

    Belli, E.A.; Hammett, G.W.

    2004-01-01

    We explore the implementation of an Alternating Direction Implicit (ADI) algorithm for a gyrokinetic plasma problem and its resulting numerical stability properties. This algorithm, which uses a standard ADI scheme to divide the field solve from the particle distribution function advance, has previously been found to work well for certain plasma kinetic problems involving one spatial and two velocity dimensions, including collisions and an electric field. However, for the gyrokinetic problem we find a severe stability restriction on the time step. Furthermore, we find that this numerical instability limitation also affects some other algorithms, such as a partially implicit Adams-Bashforth algorithm, where the parallel motion operator v parallel ∂/∂z is treated implicitly and the field terms are treated with an Adams-Bashforth explicit scheme. Fully explicit algorithms applied to all terms can be better at long wavelengths than these ADI or partially implicit algorithms

  11. Equity for open-access journal publishing.

    Directory of Open Access Journals (Sweden)

    Stuart M Shieber

    2009-08-01

    Full Text Available Open-access journals, which provide access to their scholarly articles freely and without limitations, are at a systematic disadvantage relative to traditional closed-access journal publishing and its subscription-based business model. A simple, cost-effective remedy to this inequity could put open-access publishing on a path to become a sustainable, efficient system.

  12. Web publishing today and tomorrow

    CERN Document Server

    Lie, Hakon W

    1999-01-01

    The three lectures will give participants the grand tour of the Web as we know it today, as well as peeks into the past and the future. Many three-letter acronyms will be expanded, and an overview will be provided to see how the various specifications work together. Web publishing is the common theme throughout the lectures and in the second lecture, special emphasis will be given to data formats for publishing, including HTML, XML, MathML and SMIL. In the last lectures, automatic document manipulation and presentation will be discussed, including CSS, DOM and XTL.

  13. A numerical solution of the coupled proton-H atom transport equations for the proton aurora

    International Nuclear Information System (INIS)

    Basu, B.; Jasperse, J.R.; Grossbard, N.J.

    1990-01-01

    A numerical code has been developed to solve the coupled proton-H atom linear transport equations for the proton aurora. The transport equations have been simplified by using plane-parallel geometry and the forward-scattering approximations only. Otherwise, the equations and their numerical solutions are exact. Results are presented for the particle fluxes and the energy deposition rates, and they are compared with the previous analytical results that were obtained by using additional simplifying approximations. It is found that although the analytical solutions for the particle fluxes differ somewhat from the numerical solutions, the energy deposition rates calculated by the two methods agree to within a few percent. The accurate particle fluxes given by the numerical code are useful for accurate calculation of the characteristic quantities of the proton aurora, such as the ionization rates and the emission rates

  14. Systematic review of the risk of uterine rupture with the use of amnioinfusion after previous cesarean delivery.

    Science.gov (United States)

    Hicks, Paul

    2005-04-01

    Amnioinfusion is commonly used for the intrapartum treatment of women with pregnancy complicated by thick meconium or oligohydramnios with deep variable fetal heart rate decelerations. Its benefit in women with previous cesarean deliveries is less known. Theoretically, rapid increases in intrauterine volume would lead to a higher risk of uterine rupture. Searches of the Cochrane Library from inception to the third quarter of 2001 and MEDLINE, 1966 to November 2001, were performed by using keywords "cesarean" and "amnioinfusion." Search terms were expanded to maximize results. All languages were included. Review articles, editorials, and data previously published in other sites were not analyzed. Four studies were retrieved having unduplicated data describing amnioinfusion in women who were attempting a trial of labor after previous cesarean section. As the studies were of disparate types, meta-analysis was not possible. The use of amnioinfusion in women with previous cesarean delivery who are undergoing a trial of labor may be a safe procedure, but confirmatory large, controlled prospective studies are needed before definitive recommendations can be made.

  15. Loop integration results using numerical extrapolation for a non-scalar integral

    International Nuclear Information System (INIS)

    Doncker, E. de; Shimizu, Y.; Fujimoto, J.; Yuasa, F.; Kaugars, K.; Cucos, L.; Van Voorst, J.

    2004-01-01

    Loop integration results have been obtained using numerical integration and extrapolation. An extrapolation to the limit is performed with respect to a parameter in the integrand which tends to zero. Results are given for a non-scalar four-point diagram. Extensions to accommodate loop integration by existing integration packages are also discussed. These include: using previously generated partitions of the domain and roundoff error guards

  16. Reclaiming Society Publishing

    Directory of Open Access Journals (Sweden)

    Philip E. Steinberg

    2015-07-01

    Full Text Available Learned societies have become aligned with commercial publishers, who have increasingly taken over the latter’s function as independent providers of scholarly information. Using the example of geographical societies, the advantages and disadvantages of this trend are examined. It is argued that in an era of digital publication, learned societies can offer leadership with a new model of open access that can guarantee high quality scholarly material whose publication costs are supported by society membership dues.

  17. Hprints - Licence to publish

    DEFF Research Database (Denmark)

    Rabow, Ingegerd; Sikström, Marjatta; Drachen, Thea Marie

    2010-01-01

    realised the potential advantages for them. The universities have a role here as well as the libraries that manage the archives and support scholars in various aspects of the publishing processes. Libraries are traditionally service providers with a mission to facilitate the knowledge production...

  18. Preoperative screening: value of previous tests.

    Science.gov (United States)

    Macpherson, D S; Snow, R; Lofgren, R P

    1990-12-15

    To determine the frequency of tests done in the year before elective surgery that might substitute for preoperative screening tests and to determine the frequency of test results that change from a normal value to a value likely to alter perioperative management. Retrospective cohort analysis of computerized laboratory data (complete blood count, sodium, potassium, and creatinine levels, prothrombin time, and partial thromboplastin time). Urban tertiary care Veterans Affairs Hospital. Consecutive sample of 1109 patients who had elective surgery in 1988. At admission, 7549 preoperative tests were done, 47% of which duplicated tests performed in the previous year. Of 3096 previous results that were normal as defined by hospital reference range and done closest to the time of but before admission (median interval, 2 months), 13 (0.4%; 95% CI, 0.2% to 0.7%), repeat values were outside a range considered acceptable for surgery. Most of the abnormalities were predictable from the patient's history, and most were not noted in the medical record. Of 461 previous tests that were abnormal, 78 (17%; CI, 13% to 20%) repeat values at admission were outside a range considered acceptable for surgery (P less than 0.001, frequency of clinically important abnormalities of patients with normal previous results with those with abnormal previous results). Physicians evaluating patients preoperatively could safely substitute the previous test results analyzed in this study for preoperative screening tests if the previous tests are normal and no obvious indication for retesting is present.

  19. Analytic-Numerical Approach to Solving Singularly Perturbed Parabolic Equations with the Use of Dynamic Adapted Meshes

    Directory of Open Access Journals (Sweden)

    D. V. Lukyanenko

    2016-01-01

    Full Text Available The main objective of the paper is to present a new analytic-numerical approach to singularly perturbed reaction-diffusion-advection models with solutions containing moving interior layers (fronts. We describe some methods to generate the dynamic adapted meshes for an efficient numerical solution of such problems. It is based on a priori information about the moving front properties provided by the asymptotic analysis. In particular, for the mesh construction we take into account a priori asymptotic evaluation of the location and speed of the moving front, its width and structure. Our algorithms significantly reduce the CPU time and enhance the stability of the numerical process compared with classical approaches.The article is published in the authors’ wording.

  20. Electronic Publishing or Electronic Information Handling?

    Science.gov (United States)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

  1. Representation of Numerical and Non-Numerical Order in Children

    Science.gov (United States)

    Berteletti, Ilaria; Lucangeli, Daniela; Zorzi, Marco

    2012-01-01

    The representation of numerical and non-numerical ordered sequences was investigated in children from preschool to grade 3. The child's conception of how sequence items map onto a spatial scale was tested using the Number-to-Position task (Siegler & Opfer, 2003) and new variants of the task designed to probe the representation of the alphabet…

  2. High prevalence of genetic variants previously associated with Brugada syndrome in new exome data

    DEFF Research Database (Denmark)

    Risgaard, B; Jabbari, R; Refsgaard, L

    2013-01-01

    More than 300 variants in 12 genes have been associated with Brugada syndrome (BrS) which has a prevalence ranging between 1:2000 and 1:100,000. Until recently, there has been little knowledge regarding the distribution of genetic variations in the general population. This problem was partly solved......, when exome data from the NHLI GO Exome Sequencing Project (ESP) was published. In this study, we aimed to report the prevalence of previously BrS-associated variants in the ESP population. We performed a search in ESP for variants previously associated with BrS. In addition, four variants in ESP were...... to a surprisingly high genotype prevalence of 1:23 (274:6258). Genotyping the four common ESP-derived variants CACNA2D1 S709N, SCN5A F2004L, CACNB2 S143F, and CACNB2 T450I in the Danish controls, we found a genotype prevalence comparable with that found in ESP. We suggest that exome data are used in research...

  3. The Academic Publishing Industry

    DEFF Research Database (Denmark)

    Nell, Phillip Christopher; Wenzel, Tim Ole; Schmidt, Florian

    2014-01-01

    . The case is intended to be used as a basis for class discussion rather than to illustrate effective handling of a managerial situation. It is based on published sources, interviews, and personal experience. The authors have disguised some names and other identifying information to protect confidentiality....

  4. Generalisation to binary mixtures of the second gradient method and application to direct numerical simulation of nucleate boiling

    International Nuclear Information System (INIS)

    Fouillet, C.

    2003-01-01

    In this work, we simulate a nucleate boiling problem using direct numerical simulation. The numerical method used is the second gradient method based on a diffuse interface model which represents interfaces as volumetric regions of finite thickness across which the physical properties of the fluid vary continuously. First, this method is successfully applied to nucleate boiling of a pure fluid. Then, the model is extended to dilute binary mixtures. After studying its validity and its limits in simple configurations, it is then applied to nucleate boiling of a dilute mixture. These simulations show a strong decrease of the heat transfer coefficient as the concentration increases, in agreement with the numerous experimental studies published in this domain. (author) [fr

  5. Accuracy and efficiency of published film dosimetry techniques using a flat-bed scanner and EBT3 film.

    Science.gov (United States)

    Spelleken, E; Crowe, S B; Sutherland, B; Challens, C; Kairn, T

    2018-03-01

    Gafchromic EBT3 film is widely used for patient specific quality assurance of complex treatment plans. Film dosimetry techniques commonly involve the use of transmission scanning to produce TIFF files, which are analysed using a non-linear calibration relationship between the dose and red channel net optical density (netOD). Numerous film calibration techniques featured in the literature have not been independently verified or evaluated. A range of previously published film dosimetry techniques were re-evaluated, to identify whether these methods produce better results than the commonly-used non-linear, netOD method. EBT3 film was irradiated at calibration doses between 0 and 4000 cGy and 25 pieces of film were irradiated at 200 cGy to evaluate uniformity. The film was scanned using two different scanners: The Epson Perfection V800 and the Epson Expression 10000XL. Calibration curves, uncertainty in the fit of the curve, overall uncertainty and uniformity were calculated following the methods described by the different calibration techniques. It was found that protocols based on a conventional film dosimetry technique produced results that were accurate and uniform to within 1%, while some of the unconventional techniques produced much higher uncertainties (> 25% for some techniques). Some of the uncommon methods produced reliable results when irradiated to the standard treatment doses (film analysis technique which uses transmission scanning, red colour channel analysis, netOD and a non-linear calibration curve for measuring doses up to 4000 cGy when using EBT3 film.

  6. Numerical evidence for 'multiscalar stars'

    International Nuclear Information System (INIS)

    Hawley, Scott H.; Choptuik, Matthew W.

    2003-01-01

    We present a class of general relativistic solitonlike solutions composed of multiple minimally coupled, massive, real scalar fields which interact only through the gravitational field. We describe a two-parameter family of solutions we call ''phase-shifted boson stars'' (parametrized by central density ρ 0 and phase δ), which are obtained by solving the ordinary differential equations associated with boson stars and then altering the phase between the real and imaginary parts of the field. These solutions are similar to boson stars as well as the oscillating soliton stars found by Seidel and Suen [E. Seidel and W. M. Suen, Phys. Rev. Lett. 66, 1659 (1991)]; in particular, long-time numerical evolutions suggest that phase-shifted boson stars are stable. Our results indicate that scalar solitonlike solutions are perhaps more generic than has been previously thought

  7. Towards mainstreaming of biodiversity data publishing: recommendations of the GBIF Data Publishing Framework Task Group.

    Science.gov (United States)

    Moritz, Tom; Krishnan, S; Roberts, Dave; Ingwersen, Peter; Agosti, Donat; Penev, Lyubomir; Cockerill, Matthew; Chavan, Vishwas

    2011-01-01

    Data are the evidentiary basis for scientific hypotheses, analyses and publication, for policy formation and for decision-making. They are essential to the evaluation and testing of results by peer scientists both present and future. There is broad consensus in the scientific and conservation communities that data should be freely, openly available in a sustained, persistent and secure way, and thus standards for 'free' and 'open' access to data have become well developed in recent years. The question of effective access to data remains highly problematic. Specifically with respect to scientific publishing, the ability to critically evaluate a published scientific hypothesis or scientific report is contingent on the examination, analysis, evaluation - and if feasible - on the re-generation of data on which conclusions are based. It is not coincidental that in the recent 'climategate' controversies, the quality and integrity of data and their analytical treatment were central to the debate. There is recent evidence that even when scientific data are requested for evaluation they may not be available. The history of dissemination of scientific results has been marked by paradigm shifts driven by the emergence of new technologies. In recent decades, the advance of computer-based technology linked to global communications networks has created the potential for broader and more consistent dissemination of scientific information and data. Yet, in this digital era, scientists and conservationists, organizations and institutions have often been slow to make data available. Community studies suggest that the withholding of data can be attributed to a lack of awareness, to a lack of technical capacity, to concerns that data should be withheld for reasons of perceived personal or organizational self interest, or to lack of adequate mechanisms for attribution. There is a clear need for institutionalization of a 'data publishing framework' that can address sociocultural

  8. Towards mainstreaming of biodiversity data publishing: recommendations of the GBIF Data Publishing Framework Task Group

    Directory of Open Access Journals (Sweden)

    Moritz Tom

    2011-12-01

    Full Text Available Abstract Background Data are the evidentiary basis for scientific hypotheses, analyses and publication, for policy formation and for decision-making. They are essential to the evaluation and testing of results by peer scientists both present and future. There is broad consensus in the scientific and conservation communities that data should be freely, openly available in a sustained, persistent and secure way, and thus standards for 'free' and 'open' access to data have become well developed in recent years. The question of effective access to data remains highly problematic. Discussion Specifically with respect to scientific publishing, the ability to critically evaluate a published scientific hypothesis or scientific report is contingent on the examination, analysis, evaluation - and if feasible - on the re-generation of data on which conclusions are based. It is not coincidental that in the recent 'climategate' controversies, the quality and integrity of data and their analytical treatment were central to the debate. There is recent evidence that even when scientific data are requested for evaluation they may not be available. The history of dissemination of scientific results has been marked by paradigm shifts driven by the emergence of new technologies. In recent decades, the advance of computer-based technology linked to global communications networks has created the potential for broader and more consistent dissemination of scientific information and data. Yet, in this digital era, scientists and conservationists, organizations and institutions have often been slow to make data available. Community studies suggest that the withholding of data can be attributed to a lack of awareness, to a lack of technical capacity, to concerns that data should be withheld for reasons of perceived personal or organizational self interest, or to lack of adequate mechanisms for attribution. Conclusions There is a clear need for institutionalization of a

  9. Functional imaging of numerical processing in adults and 4-y-old children.

    Directory of Open Access Journals (Sweden)

    Jessica F Cantlon

    2006-05-01

    Full Text Available Adult humans, infants, pre-school children, and non-human animals appear to share a system of approximate numerical processing for non-symbolic stimuli such as arrays of dots or sequences of tones. Behavioral studies of adult humans implicate a link between these non-symbolic numerical abilities and symbolic numerical processing (e.g., similar distance effects in accuracy and reaction-time for arrays of dots and Arabic numerals. However, neuroimaging studies have remained inconclusive on the neural basis of this link. The intraparietal sulcus (IPS is known to respond selectively to symbolic numerical stimuli such as Arabic numerals. Recent studies, however, have arrived at conflicting conclusions regarding the role of the IPS in processing non-symbolic, numerosity arrays in adulthood, and very little is known about the brain basis of numerical processing early in development. Addressing the question of whether there is an early-developing neural basis for abstract numerical processing is essential for understanding the cognitive origins of our uniquely human capacity for math and science. Using functional magnetic resonance imaging (fMRI at 4-Tesla and an event-related fMRI adaptation paradigm, we found that adults showed a greater IPS response to visual arrays that deviated from standard stimuli in their number of elements, than to stimuli that deviated in local element shape. These results support previous claims that there is a neurophysiological link between non-symbolic and symbolic numerical processing in adulthood. In parallel, we tested 4-y-old children with the same fMRI adaptation paradigm as adults to determine whether the neural locus of non-symbolic numerical activity in adults shows continuity in function over development. We found that the IPS responded to numerical deviants similarly in 4-y-old children and adults. To our knowledge, this is the first evidence that the neural locus of adult numerical cognition takes form early in

  10. Establishing a publishing outfit in Nigeria | Emenyonu | International ...

    African Journals Online (AJOL)

    Journal Home > Vol 12, No 1 (2017) > ... The paper examines the steps in establishing a publishing firm in the Nigerian environment. ... to follow in establishing a publishing company, networking with stakeholders in the publishing industry,the ...

  11. Desktop Publishing in Education.

    Science.gov (United States)

    Hall, Wendy; Layman, J.

    1989-01-01

    Discusses the state of desktop publishing (DTP) in education today and describes the weaknesses of the systems available for use in the classroom. Highlights include document design and layout; text composition; graphics; word processing capabilities; a comparison of commercial and educational DTP packages; and skills required for DTP. (four…

  12. FTP: Full-Text Publishing?

    Science.gov (United States)

    Jul, Erik

    1992-01-01

    Describes the use of file transfer protocol (FTP) on the INTERNET computer network and considers its use as an electronic publishing system. The differing electronic formats of text files are discussed; the preparation and access of documents are described; and problems are addressed, including a lack of consistency. (LRW)

  13. Six-dimensional localized black holes: Numerical solutions

    International Nuclear Information System (INIS)

    Kudoh, Hideaki

    2004-01-01

    To test the strong-gravity regime in Randall-Sundrum braneworlds, we consider black holes bound to a brane. In a previous paper, we studied numerical solutions of localized black holes whose horizon radii are smaller than the AdS curvature radius. In this paper, we improve the numerical method and discuss properties of the six-dimensional (6D) localized black holes whose horizon radii are larger than the AdS curvature radius. At a horizon temperature T≅1/2πl, the thermodynamics of the localized black hole undergo a transition with its character changing from a 6D Schwarzschild black hole type to a 6D black string type. The specific heat of the localized black holes is negative, and the entropy is greater than or nearly equal to that of the 6D black strings with the same thermodynamic mass. The large localized black holes show flattened horizon geometries, and the intrinsic curvature of the horizon four-geometry becomes negative near the brane. Our results indicate that the recovery mechanism of lower-dimensional Einstein gravity on the brane works even in the presence of the black holes

  14. Trends in scientific publishing: Dark clouds loom large.

    Science.gov (United States)

    Vinny, Pulikottil Wilson; Vishnu, Venugopalan Y; Lal, Vivek

    2016-04-15

    The world wide web has brought about a paradigm shift in the way medical research is published and accessed. The ease with which a new journal can be started/hosted by publishing start-ups is unprecedented. The tremendous capabilities of the world wide web and the open access revolution when combined with a highly profitable business have attracted unscrupulous fraudulent operators to the publishing industry. The intent of these fraudulent publishers is solely driven by profit with utter disregard to scientific content, peer reviews and ethics. This phenomenon has been referred to as "predatory publishing". The "international" tag of such journals often betrays their true origins. The gold open access model of publishing, where the author pays the publisher, when coupled with a non-existent peer review threatens to blur the distinction between science and pseudoscience. The average researcher needs to be made more aware of this clear and present danger to the scientific community. Prevention is better than cure. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Citations of plenary-session articles published in the Proceedings of the International Symposium on Veterinary Epidemiology and Economics.

    Science.gov (United States)

    Salman, M D; Dewell, Reneé; Willeberg, Preben; GrandMaison, Nadine; Schoenbaum, Melissa; Moothart, Tom

    2007-06-15

    We measured the potential impact of articles representing the International Symposium on Veterinary Epidemiology and Economics (ISVEE) plenary-session presentations in subsequent published literature. Between July 1, 2004 and November 9, 2004, we searched the Web of Science for citations in the scientific literature to all 99 plenary-session articles published in the proceedings of the previous nine ISVEEs (or in journal special issues dedicated to the ISVEE plenary articles). We used a 4-year window around the publication of each of the ISVEE proceedings. We located 187 citations for 37 (of the 99) articles. We infer that the ISVEE proceedings represent an important resource for veterinary epidemiology.

  16. Solution of AntiSeepage for Mengxi River Based on Numerical Simulation of Unsaturated Seepage

    Science.gov (United States)

    Ji, Youjun; Zhang, Linzhi; Yue, Jiannan

    2014-01-01

    Lessening the leakage of surface water can reduce the waste of water resources and ground water pollution. To solve the problem that Mengxi River could not store water enduringly, geology investigation, theoretical analysis, experiment research, and numerical simulation analysis were carried out. Firstly, the seepage mathematical model was established based on unsaturated seepage theory; secondly, the experimental equipment for testing hydraulic conductivity of unsaturated soil was developed to obtain the curve of two-phase flow. The numerical simulation of leakage in natural conditions proves the previous inference and leakage mechanism of river. At last, the seepage control capacities of different impervious materials were compared by numerical simulations. According to the engineering actuality, the impervious material was selected. The impervious measure in this paper has been proved to be effectible by hydrogeological research today. PMID:24707199

  17. Fungal Keratitis Due to Beauveria bassiana in a Contact Lenses Wearer and Review of Published Reports.

    Science.gov (United States)

    Lara Oya, Ana; Medialdea Hurtado, María Eloisa; Rojo Martín, María Dolores; Aguilera Pérez, Antonia; Alastruey-Izquierdo, Ana; Miranda Casas, Consuelo; Rubio Prats, Marina; Medialdea Marcos, Santiago; Navarro Marí, José María

    2016-10-01

    Fungal keratitis is a severe ocular infection that primarily affects subjects engaged in outdoor activities. Risk factors include allergic conjunctivitis, previous eye surgery, previous treatment with wide-spectrum antimicrobial agents and corticosteroids and using contact lenses. Corneal infection is usually secondary to trauma involving organic material, which is often the only predisposing factor. Early diagnosis based on clinical examination and microbiological investigation (microscopy, cultures and molecular techniques) is crucial to selecting the appropriate antifungal therapy and prevent progression. We report the case of a patient with keratitis due to Beauveria bassiana, an opportunistic and entomopathogenic filamentous fungus that is used as a biological insecticide and which is a rare cause of corneal infection. We review previous cases reports of B. bassiana keratitis published and its main features to compare with our case, a female occasional agriculture worker who had not suffered any trauma involving organic material. The patient received topical and oral antifungal therapy and debridement surgery, with a satisfactory outcome.

  18. The biomechanics of running in athletes with previous hamstring injury: A case-control study.

    Science.gov (United States)

    Daly, C; Persson, U McCarthy; Twycross-Lewis, R; Woledge, R C; Morrissey, D

    2016-04-01

    Hamstring injury is prevalent with persistently high reinjury rates. We aim to inform hamstring rehabilitation by exploring the electromyographic and kinematic characteristics of running in athletes with previous hamstring injury. Nine elite male Gaelic games athletes who had returned to sport after hamstring injury and eight closely matched controls sprinted while lower limb kinematics and muscle activity of the previously injured biceps femoris, bilateral gluteus maximus, lumbar erector spinae, rectus femoris, and external oblique were recorded. Intergroup comparisons of muscle activation ratios and kinematics were performed. Previously injured athletes demonstrated significantly reduced biceps femoris muscle activation ratios with respect to ipsilateral gluteus maximus (maximum difference -12.5%, P = 0.03), ipsilateral erector spinae (maximum difference -12.5%, P = 0.01), ipsilateral external oblique (maximum difference -23%, P = 0.01), and contralateral rectus femoris (maximum difference -22%, P = 0.02) in the late swing phase. We also detected sagittal asymmetry in hip flexion (maximum 8°, P = 0.01), pelvic tilt (maximum 4°, P = 0.02), and medial rotation of the knee (maximum 6°, P = 0.03) effectively putting the hamstrings in a lengthened position just before heel strike. Previous hamstring injury is associated with altered biceps femoris associated muscle activity and potentially injurious kinematics. These deficits should be considered and addressed during rehabilitation. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. Numerical Continuation Methods for Intrusive Uncertainty Quantification Studies

    Energy Technology Data Exchange (ETDEWEB)

    Safta, Cosmin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Najm, Habib N. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Phipps, Eric Todd [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    Rigorous modeling of engineering systems relies on efficient propagation of uncertainty from input parameters to model outputs. In recent years, there has been substantial development of probabilistic polynomial chaos (PC) Uncertainty Quantification (UQ) methods, enabling studies in expensive computational models. One approach, termed ”intrusive”, involving reformulation of the governing equations, has been found to have superior computational performance compared to non-intrusive sampling-based methods in relevant large-scale problems, particularly in the context of emerging architectures. However, the utility of intrusive methods has been severely limited due to detrimental numerical instabilities associated with strong nonlinear physics. Previous methods for stabilizing these constructions tend to add unacceptably high computational costs, particularly in problems with many uncertain parameters. In order to address these challenges, we propose to adapt and improve numerical continuation methods for the robust time integration of intrusive PC system dynamics. We propose adaptive methods, starting with a small uncertainty for which the model has stable behavior and gradually moving to larger uncertainty where the instabilities are rampant, in a manner that provides a suitable solution.

  20. Black-hole kicks from numerical-relativity surrogate models

    Science.gov (United States)

    Gerosa, Davide; Hébert, François; Stein, Leo C.

    2018-05-01

    Binary black holes radiate linear momentum in gravitational waves as they merge. Recoils imparted to the black-hole remnant can reach thousands of km /s , thus ejecting black holes from their host galaxies. We exploit recent advances in gravitational waveform modeling to quickly and reliably extract recoils imparted to generic, precessing, black-hole binaries. Our procedure uses a numerical-relativity surrogate model to obtain the gravitational waveform given a set of binary parameters; then, from this waveform we directly integrate the gravitational-wave linear momentum flux. This entirely bypasses the need for fitting formulas which are typically used to model black-hole recoils in astrophysical contexts. We provide a thorough exploration of the black-hole kick phenomenology in the parameter space, summarizing and extending previous numerical results on the topic. Our extraction procedure is made publicly available as a module for the Python programming language named surrkick. Kick evaluations take ˜0.1 s on a standard off-the-shelf machine, thus making our code ideal to be ported to large-scale astrophysical studies.

  1. The author training manual develop marketable ideas, craft books that sell, become the author publishers want, and self-publish effectively

    CERN Document Server

    Amir, Nina

    2014-01-01

    Anyone can publish a book and become an ""author,"" but if you want to become a successful author with a profitable publishing career, you need a clear, step-by-step guide to help you develop book ideas that sell. In The Author Training Manual, expert editor and book coach Nina Amir reveals the exact process successful authors have used to create business plans and proposals for their books and teaches you how to view your ideas through the eyes of acquisitions editors and literary agents. Whether you write fiction or nonfiction, plan to traditionally publish or self-publish, The Author Tra

  2. E-publishing and multimodalities

    Directory of Open Access Journals (Sweden)

    Yngve Nordkvelle

    2008-12-01

    Full Text Available In the literature of e-publishing there has been a consistent call from the advent of e-publishing on, until now, to explore new ways of expressing ideas through the new media. It has been claimed that the Internet opens an alley of possibilities and opportunites for publishing that will change the ways of publishing once and for all. In the area of publication of e-journals, however, the call for changes has received very modest responds.The thing is, it appears, that the conventional paper journal has a solid grip on the accepted formats of publishing. In a published research paper Mayernik (2007 explaines some of the reasons for that. Although pioneers of e-publishing suggested various areas where academic publishing could be expanded on, the opportunities given are scarsely used. Mayernik outlines "Non-linearity", "Multimedia", "Multiple use", "Interactivity" and "Rapid Publication" as areas of expansion for the academic e-journal. (2007. The paper deserves a thorough reading in itself, and I will briefly quote from his conclusion: "It is likely that the traditional linear article will continue to be the prevalent format for scholarly journals, both print and electronic, for the foreseeable future, and while electronic features will garner more and more use as technology improves, they will continue to be used to supplement, and not supplant, the traditional article."This is a challenging situation. If we accept the present dominant style of presenting scientific literature, we would use our energy best in seeking a way of improving the efficiency of that communication style. The use of multimedia, non-linearity etc. would perfect the present state, but still keep the scientific article as the main template. It is very unlikely that scientific publication will substitute the scholarly article with unproven alternatives. What we face is a rather conservative style of remediation that blurs the impact of the new media, - or "transparency" if

  3. Numerical evaluation of path-integral solutions to Fokker-Planck equations. II. Restricted stochastic processes

    International Nuclear Information System (INIS)

    Wehner, M.F.

    1983-01-01

    A path-integral solution is derived for processes described by nonlinear Fokker-Plank equations together with externally imposed boundary conditions. This path-integral solution is written in the form of a path sum for small time steps and contains, in addition to the conventional volume integral, a surface integral which incorporates the boundary conditions. A previously developed numerical method, based on a histogram representation of the probability distribution, is extended to a trapezoidal representation. This improved numerical approach is combined with the present path-integral formalism for restricted processes and is show t give accurate results. 35 refs., 5 figs

  4. A numerical solution of a singular boundary value problem arising in boundary layer theory.

    Science.gov (United States)

    Hu, Jiancheng

    2016-01-01

    In this paper, a second-order nonlinear singular boundary value problem is presented, which is equivalent to the well-known Falkner-Skan equation. And the one-dimensional third-order boundary value problem on interval [Formula: see text] is equivalently transformed into a second-order boundary value problem on finite interval [Formula: see text]. The finite difference method is utilized to solve the singular boundary value problem, in which the amount of computational effort is significantly less than the other numerical methods. The numerical solutions obtained by the finite difference method are in agreement with those obtained by previous authors.

  5. Numerical Studies of Magnetohydrodynamic Activity Resulting from Inductive Transients. Final Report

    International Nuclear Information System (INIS)

    Sovinec, Carl R.

    2005-01-01

    This report describes results from numerical studies of transients in magnetically confined plasmas. The work has been performed by University of Wisconsin graduate students James Reynolds and Giovanni Cone and by the Principal Investigator through support from contract DE-FG02-02ER54687, a Junior Faculty in Plasma Science award from the DOE Office of Science. Results from the computations have added significantly to our knowledge of magnetized plasma relaxation in the reversed-field pinch (RFP) and spheromak. In particular, they have distinguished relaxation activity expected in sustained configurations from transient effects that can persist over a significant fraction of the plasma discharge. We have also developed the numerical capability for studying electrostatic current injection in the spherical torus (ST). These configurations are being investigated as plasma confinement schemes in the international effort to achieve controlled thermonuclear fusion for environmentally benign energy production. Our numerical computations have been performed with the NIMROD code (http://nimrodteam.org) using local computing resources and massively parallel computing hardware at the National Energy Research Scientific Computing Center. Direct comparisons of simulation results for the spheromak with laboratory measurements verify the effectiveness of our numerical approach. The comparisons have been published in refereed journal articles by this group and by collaborators at Lawrence Livermore National Laboratory (see Section 4). In addition to the technical products, this grant has supported the graduate education of the two participating students for three years

  6. Publisher Correction: Predicting unpredictability

    Science.gov (United States)

    Davis, Steven J.

    2018-06-01

    In this News & Views article originally published, the wrong graph was used for panel b of Fig. 1, and the numbers on the y axes of panels a and c were incorrect; the original and corrected Fig. 1 is shown below. This has now been corrected in all versions of the News & Views.

  7. One century of studies on lead poisoning in papers published in La Medicina del Lavoro.

    Science.gov (United States)

    Alessio, L; Cortesi, I; Materzanini, P; Barenghi, M

    2000-09-01

    One century of papers published in the Italian journal of occupational medicine, La Medicina del Lavoro, shows clearly that the study of lead is an exemplary topic for occupational physicians, enabling them to observe the evolution of research in the field of occupational health. The numerous pathological features of lead poisoning, doctors' successive therapeutic responses, and their gradual development of preventive techniques, form a paradigm that has subsequently been applied to all other fields of industrial toxicology. The evolution of the study of lead poisoning during this century is a complete example in the field of occupational toxicology for medical students: it will stimulate them in applying both clinical and preventive knowledge in the field of industrial toxicology. Copyright 2000 Wiley-Liss, Inc.

  8. What was hidden in the Publisher's Archive

    DEFF Research Database (Denmark)

    Mai, Anne-Marie

    2015-01-01

    On the Danish Author Elsa Gress and her correspondence on American Literature with the Publisher, K. E. Hermann, Arena.......On the Danish Author Elsa Gress and her correspondence on American Literature with the Publisher, K. E. Hermann, Arena....

  9. Management strategies to improve the academic performance of previously disadvantaged secondary schools in the grade 12 examination.

    OpenAIRE

    2004-01-01

    The importance of secondary school education in moulding learners into responsible citizens of tomorrow cannot be ignored or undermined. Secondary school education is the stepping stone for unlimited opportunities for learners to explore the career choices that they have to pursue further in their lives. Every year the performance of secondary schools in the matric examination come under spotlight as soon as the results are published. Many schools in the previously disadvantaged communities p...

  10. Numerical tackling for viscoelastic fluid flow in rotating frame considering homogeneous-heterogeneous reactions

    Science.gov (United States)

    Maqsood, Najwa; Mustafa, M.; Khan, Junaid Ahmad

    This study provides a numerical treatment for rotating flow of viscoelastic (Maxwell) fluid bounded by a linearly deforming elastic surface. Mass transfer analysis is carried out in the existence of homogeneous-heterogeneous reactions. By means of usual transformation, the governing equations are changed into global similarity equations which have been tackled by an expedient shooting approach. A contemporary numerical routine bvp4c of software MATLAB is also opted to develop numerical approximations. Both methods of solution are found in complete agreement in all the cases. Velocity and concentration profiles are computed and elucidated for certain range of viscoelastic fluid parameter. The solutions contain a rotation-strength parameter λ that has a considerable impact on the flow fields. For sufficiently large value of λ , the velocity fields are oscillatory decaying function of the non-dimensional vertical distance. Concentration distribution at the surface is found to decrease upon increasing the strengths of chemical reactions. A comparison of present computations is made with those of already published ones and such comparison appears convincing.

  11. Numerical simulation of the tip aerodynamics and acoustics test

    Science.gov (United States)

    Tejero E, F.; Doerffer, P.; Szulc, O.; Cross, J. L.

    2016-04-01

    The application of an efficient flow control system on helicopter rotor blades may lead to improved aerodynamic performance. Recently, our invention of Rod Vortex Generators (RVGs) has been analyzed for helicopter rotor blades in hover with success. As a step forward, the study has been extended to forward flight conditions. For this reason, a validation of the numerical modelling for a reference helicopter rotor (without flow control) is needed. The article presents a study of the flow-field of the AH-1G helicopter rotor in low-, medium- and high-speed forward flight. The CFD code FLOWer from DLR has proven to be a suitable tool for the aerodynamic analysis of the two-bladed rotor without any artificial wake modelling. It solves the URANS equations with LEA (Linear Explicit Algebraic stress) k-ω model using the chimera overlapping grids technique. Validation of the numerical model uses comparison with the detailed flight test data gathered by Cross J. L. and Watts M. E. during the Tip Aerodynamics and Acoustics Test (TAAT) conducted at NASA in 1981. Satisfactory agreements for all speed regimes and a presence of significant flow separation in high-speed forward flight suggest a possible benefit from the future implementation of RVGs. The numerical results based on the URANS approach are presented not only for a popular, low-speed case commonly used in rotorcraft community for CFD codes validation but preferably for medium- and high-speed test conditions that have not been published to date.

  12. Technical Services in the Age of Electronic Publishing.

    Science.gov (United States)

    Brownrigg, Edwin; And Others

    1984-01-01

    Examination of the traditional library technical services functions and how they may change with the advent of widespread computer-based electronic publishing emphasizes ways in which technical services will have to adapt in electronic publishing environment. Implications of electronic publishing for library management and budgeting are explored.…

  13. Does previous abdominal surgery affect the course and outcomes of laparoscopic bariatric surgery?

    Science.gov (United States)

    Major, Piotr; Droś, Jakub; Kacprzyk, Artur; Pędziwiatr, Michał; Małczak, Piotr; Wysocki, Michał; Janik, Michał; Walędziak, Maciej; Paśnik, Krzysztof; Hady, Hady Razak; Dadan, Jacek; Proczko-Stepaniak, Monika; Kaska, Łukasz; Lech, Paweł; Michalik, Maciej; Duchnik, Michał; Kaseja, Krzysztof; Pastuszka, Maciej; Stepuch, Paweł; Budzyński, Andrzej

    2018-03-26

    Global experiences in general surgery suggest that previous abdominal surgery may negatively influence different aspects of perioperative care. As the incidence of bariatric procedures has recently increased, it is essential to assess such correlations in bariatric surgery. To assess whether previous abdominal surgery influences the course and outcomes of laparoscopic bariatric surgery. Seven referral bariatric centers in Poland. We conducted a retrospective analysis of 2413 patients; 1706 patients who underwent laparoscopic sleeve gastrectomy (SG) or Roux-en-Y gastric bypass (RYGB) matched the inclusion criteria. Patients with no history of abdominal surgery were included as group 1, while those who had undergone at least 1 abdominal surgery were included as group 2. Group 2 had a significantly prolonged median operation time for RYGB (P = .012), and the longest operation time was observed in patients who had previously undergone surgeries in both the upper and lower abdomen (P = .002). Such a correlation was not found in SG cases (P = .396). Groups 1 and 2 had similar rates of intraoperative adverse events and postoperative complications (P = .562 and P = .466, respectively). Group 2 had a longer median duration of hospitalization than group 1 (P = .034), while the readmission rate was similar between groups (P = .079). There was no significant difference between groups regarding the influence of the long-term effects of bariatric treatment on weight loss (percentage of follow-up was 55%). Previous abdominal surgery prolongs the operative time of RYGB and the duration of postoperative hospitalization, but does not affect the long-term outcomes of bariatric treatment. Copyright © 2018 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  14. Performance of Nigerian Publishers as Innovation agents to ...

    African Journals Online (AJOL)

    There have been arguments suggesting that the low rate of adoption of digital publishing innovations in Nigeria could be attributed to the conservative activities of local publishers. This study, therefore, set out to investigate the role played by local Nigerian Publishers towards the acquisition and adoption of digital resources ...

  15. Publishing scientific papers in scholarly journals | Ayensu | Journal ...

    African Journals Online (AJOL)

    The rigorous demand of peer review has been emphasized to illustrate the academic nature of scholarly publishing. The quality attributes of a manuscript in terms of ... The rules, norms, ethics and standards of publishing in relation to copyrights and plagiarism are discussed. The published paper is recognized as the ...

  16. Published journal article with data

    Data.gov (United States)

    U.S. Environmental Protection Agency — published journal article. This dataset is associated with the following publication: Schumacher, B., J. Zimmerman, J. Elliot, and G. Swanson. The Effect of...

  17. Numerical distance protection

    CERN Document Server

    Ziegler, Gerhard

    2011-01-01

    Distance protection provides the basis for network protection in transmission systems and meshed distribution systems. This book covers the fundamentals of distance protection and the special features of numerical technology. The emphasis is placed on the application of numerical distance relays in distribution and transmission systems.This book is aimed at students and engineers who wish to familiarise themselves with the subject of power system protection, as well as the experienced user, entering the area of numerical distance protection. Furthermore it serves as a reference guide for s

  18. HEART TRANSPLANTATION IN PATIENTS WITH PREVIOUS OPEN HEART SURGERY

    Directory of Open Access Journals (Sweden)

    R. Sh. Saitgareev

    2016-01-01

    Full Text Available Heart Transplantation (HTx to date remains the most effective and radical method of treatment of patients with end-stage heart failure. The defi cit of donor hearts is forcing to resort increasingly to the use of different longterm mechanical circulatory support systems, including as a «bridge» to the follow-up HTx. According to the ISHLT Registry the number of recipients underwent cardiopulmonary bypass surgery increased from 40% in the period from 2004 to 2008 to 49.6% for the period from 2009 to 2015. HTx performed in repeated patients, on the one hand, involves considerable technical diffi culties and high risks; on the other hand, there is often no alternative medical intervention to HTx, and if not dictated by absolute contradictions the denial of the surgery is equivalent to 100% mortality. This review summarizes the results of a number of published studies aimed at understanding the immediate and late results of HTx in patients, previously underwent open heart surgery. The effect of resternotomy during HTx and that of the specifi c features associated with its implementation in recipients previously operated on open heart, and its effects on the immediate and long-term survival were considered in this review. Results of studies analyzing the risk factors for perioperative complications in repeated recipients were also demonstrated. Separately, HTx risks after implantation of prolonged mechanical circulatory support systems were examined. The literature does not allow to clearly defi ning the impact factor of earlier performed open heart surgery on the course of perioperative period and on the prognosis of survival in recipients who underwent HTx. On the other hand, subject to the regular fl ow of HTx and the perioperative period the risks in this clinical situation are justifi ed as a long-term prognosis of recipients previously conducted open heart surgery and are comparable to those of patients who underwent primary HTx. Studies

  19. A compendium of P- and S-wave velocities from surface-to-borehole logging; summary and reanalysis of previously published data and analysis of unpublished data

    Science.gov (United States)

    Boore, David M.

    2003-01-01

    For over 28 years, the U.S. Geological Survey (USGS) has been acquiring seismic velocity and geologic data at a number of locations in California, many of which were chosen because strong ground motions from earthquakes were recorded at the sites. The method for all measurements involves picking first arrivals of P- and S-waves from a surface source recorded at various depths in a borehole (as opposed to noninvasive methods, such as the SASW method [e.g., Brown et al., 2002]). The results from most of the sites are contained in a series of U.S. Geological Survey Open-File Reports (see References). Until now, none of the results have been available as computer files, and before 1992 the interpretation of the arrival times was in terms of piecemeal interval velocities, with no attempt to derive a layered model that would fit the travel times in an overall sense (the one exception is Porcella, 1984). In this report I reanalyze all of the arrival times in terms of layered models for P- and for S-wave velocities at each site, and I provide the results as computer files. In addition to the measurements reported in the open-file reports, I also include some borehole results from other reports, as well as some results never before published. I include data for 277 boreholes (at the time of this writing; more will be added to the web site as they are obtained), all in California (I have data from boreholes in Washington and Utah, but these will be published separately). I am also in the process of interpreting travel time data obtained using a seismic cone penetrometer at hundreds of sites; these data can be interpreted in the same way of those obtained from surface-to-borehole logging. When available, the data will be added to the web site (see below for information on obtaining data from the World Wide Web (WWW)). In addition to the basic borehole data and results, I provide information concerning strong-motion stations that I judge to be close enough to the boreholes

  20. Simultaneous and Comparable Numerical Indicators of International, National and Local Collaboration Practices in English-Medium Astrophysics Research Papers

    Science.gov (United States)

    Méndez, David I.; Alcaraz, M. Ángeles

    2016-01-01

    Introduction: We report an investigation on collaboration practices in research papers published in the most prestigious English-medium astrophysics journals. Method: We propose an evaluation method based on three numerical indicators to study and compare, in absolute terms, three different types of collaboration (international, national and…

  1. Numerical methods using Matlab

    CERN Document Server

    Lindfield, George

    2012-01-01

    Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board. Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of use

  2. Where on earth to publish? A sample survey comparing traditional and open access publishing in the oncological field.

    Science.gov (United States)

    Poltronieri, Elisabetta; Bravo, Elena; Camerini, Tiziana; Ferri, Maurizio; Rizzo, Roberto; Solimini, Renata; Cognetti, Gaetana

    2013-01-22

    The paper intends to help scientific authors to make the best choice of journals in which to publish, by describing and comparing journal features in the area of oncology. For this purpose, the authors identified impact factor (IF) ranking, cost options and copyright conditions offered to authors wishing to publish in full open access (OA), subscription-based or hybrid journals. Data referring to articles published in 2010 by three Italian research institutions (National Institute of Health - Rome (ISS), Regina Elena National Cancer Institute - Rome (IRE), National Cancer Institute - Milan (INT) in journals (78) managed according to different business models, all listed in the Journal Citation Reports, subject category Oncology, were collected and analysed. The journals surveyed were ranked according to IF, position in quartiles, publication charges, usage rights in published articles, self-archiving conditions in OAI-compliant repositories digital archives. Almost half (34) the journals surveyed were included in the first quartile, thus revealing authors' preference for journals with a high IF. The prevalent journal business model was the hybrid formula (based on subscriptions but also offering a paid OA option) with 51 journals, followed by subscription-based only journals accounting for 22, while just 5 full OA journals were identified. In general, no relationship was found between IF and article publication charges, in terms of correspondence between more expensive fees and higher IF. The issue of OA journals as compared with traditional subscription-based journals is highly debated among stakeholders: library administrators facing financial restrictions, authors seeking to locate the best outlet for their research, publishers wishing to increase their revenues by offering journals with wider appeal. Against this background, factors such as the quest for alternatives to high-cost business models, investments in setting up institutional repositories hosting the

  3. Open Access publishing in physics gains momentum

    CERN Multimedia

    2006-01-01

    The first meeting of European particle physics funding agencies took place on 3 November at CERN to establish a consortium for Open Access publishing in particle physics, SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics). Open Access could transform the academic publishing world, with a great impact on research. The traditional model of research publication is funded through reader subscriptions. Open Access will turn this model on its head by changing the funding structure of research results, without increasing the overall cost of publishing. Instead of demanding payment from readers, publications will be distributed free of charge, financed by funding agencies via laboratories and the authors. This new concept will bring greater benefits and broaden opportunities for researchers and funding agencies by providing unrestricted distribution of the results of publicly funded research. The meeting marked a positive step forward, with international support from laboratories, fundin...

  4. Data Publishing - View from the Front

    Science.gov (United States)

    Carlson, David; Pfeiffenberger, Hans

    2014-05-01

    As data publishing journals - Earth System Science Data (ESSD, Copernicus, since 2009), Geophysical Data Journal (GDJ, Wiley, recent) and Scientific Data (SD, Nature Publishing Group, anticipated from May 2014) - expose data sets, implement data description and data review practices, and develop partnerships with data centres and data providers, we anticipate substantial benefits for the broad earth system and environmental research communities but also substantial challenges for all parties. A primary advantage emerges from open access to convergent data: subsurface hydrographic data near Antarctica, for example, now available for combination and comparison with nearby atmospheric data (both documented in ESSD), basin-scale precipitation data (accessed through GDJ) for comparison and interpolation with long-term global precipitation records (accessed from ESSD), or, imagining not too far into the future, stomach content and abundance data for European fish (from ESSD) linked to genetic or nutritional data (from SD). In addition to increased opportunity for discovery and collaboration, we also notice parallel developments of new tools for (published) data visualization and display and increasing acceptance of data publication as a useful and anticipated dissemination step included in project- and institution-based data management plans. All parties - providers, publishers and users - will benefit as various indexing services (SCI, SCOPUS, DCI etc.) acknowledge the creative, intellectual and meritorious efforts of data preparation and data provision. The challenges facing data publication, in most cases very familiar to the data community but made more acute by the advances in data publishing, include diverging metadata standards (among biomedical, green ocean modeling and meteorological communities, for example), adhering to standards and practices for permanent identification while also accommodating 'living' data, and maintaining prompt but rigorous review and

  5. Exploring new frontiers of electronic publishing in biomedical science.

    Science.gov (United States)

    Ng, K H

    2009-03-01

    Publishing is a hallmark of good scientific research. The aim of publishing is to disseminate new research knowledge and findings as widely as possible in a timely and efficient manner. Scientific publishing has evolved over the years with the advent of new technologies and demands. This paper presents a brief discussion on the history and status of electronic publishing. The Open Access Initiative was created with the aim of overcoming various limitations faced by traditional publishing access models. Innovations have opened up possibilities for electronic publishing to increase the accessibility, visibility, interactivity and usability of research. A glimpse of the future publishing landscape has revealed that scientific communication and research will not remain the same. The internet and advances in information technology will have an impact on the research landscape, scholarly publishing, research policy and funding, dissemination of knowledge, and the progress of science as a whole.

  6. 46 CFR 503.11 - Materials to be published.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Materials to be published. 503.11 Section 503.11... in the Federal Register § 503.11 Materials to be published. The Commission shall separately state and concurrently publish the following materials in the Federal Register for the guidance of the public: (a...

  7. "Are you gonna publish that?" Peer-reviewed publication outcomes of doctoral dissertations in psychology

    Science.gov (United States)

    Amaro, Christina M.; Herbert, Robyn; Blossom, Jennifer B.; Roberts, Michael C.

    2018-01-01

    If a doctoral dissertation represents an original investigation that makes a contribution to one’s field, then dissertation research could, and arguably should, be disseminated into the scientific literature. However, the extent and nature of dissertation publication remains largely unknown within psychology. The present study investigated the peer-reviewed publication outcomes of psychology dissertation research in the United States. Additionally, we examined publication lag, scientific impact, and variations across subfields. To investigate these questions, we first drew a stratified random cohort sample of 910 psychology Ph.D. dissertations from ProQuest Dissertations & Theses. Next, we conducted comprehensive literature searches for peer-reviewed journal articles derived from these dissertations published 0–7 years thereafter. Published dissertation articles were coded for their bibliographic details, citation rates, and journal impact metrics. Results showed that only one-quarter (25.6% [95% CI: 23.0, 28.4]) of dissertations were ultimately published in peer-reviewed journals, with significant variations across subfields (range: 10.1 to 59.4%). Rates of dissertation publication were lower in professional/applied subfields (e.g., clinical, counseling) compared to research/academic subfields (e.g., experimental, cognitive). When dissertations were published, however, they often appeared in influential journals (e.g., Thomson Reuters Impact Factor M = 2.84 [2.45, 3.23], 5-year Impact Factor M = 3.49 [3.07, 3.90]) and were cited numerous times (Web of Science citations per year M = 3.65 [2.88, 4.42]). Publication typically occurred within 2–3 years after the dissertation year. Overall, these results indicate that the large majority of Ph.D. dissertation research in psychology does not get disseminated into the peer-reviewed literature. The non-publication of dissertation research appears to be a systemic problem affecting both research and training in

  8. A Broyden numerical Kutta condition for an unsteady panel method

    International Nuclear Information System (INIS)

    Liu, P.; Bose, N.; Colbourne, B.

    2003-01-01

    In panel methods, numerical Kutta conditions are applied in order to ensure that pressure differences between the surfaces at the trailing edges of lifting surface elements are close to zero. Previous numerical Kutta conditions for 3-D panel methods have focused on use of the Newton-Raphson iterative procedure. For extreme unsteady motions, such as for oscillating hydrofoils or for a propeller behind a blockage, the Newton-Raphson procedure can have severe convergence difficulties. The Broyden iteration, a modified Newton-Raphson iteration procedure, is applied here to obtain improved convergence behavior. Using the Broyden iteration increases the reliability, robustness and in many cases computing efficiency for unsteady, multi-body interactive flows. This method was tested in a time domain code for an ice class propeller in both open water flow and during interaction with a nearby ice blockage. Predictions showed that the method was effective in these extreme flows. (author)

  9. Publishing in Educational Psychology Journals: Comments from Editors

    Science.gov (United States)

    Nihalani, Priya K.; Mayrath, Michael C.

    2008-01-01

    The following paper emphasizes the importance of publishing and learning how to publish in educational psychology journals. We have compiled a set of recommendations based on advice from editors in the field and several other sources on how to publish. Additionally, this paper provides a step-by-step guide that graduate students and junior faculty…

  10. DIY eBooks: collaborative publishing made easy

    Science.gov (United States)

    Battle, Steve; Vitali, Fabio; Di Iorio, Angelo; Bernius, Matthew; Henderson, Tona; Choudhury, Manu

    2010-02-01

    Print is undergoing a revolution as significant as the invention of the printing press. The emergence of ePaper is a major disruption for the printing industry; defining a new medium with the potential to redefine publishing in a way that is as different to today's Web, as the Web is to traditional print. In this new eBook ecosystem we don't just see users as consumers of eBooks, but as active prosumers able to collaboratively create, customize and publish their own eBooks. We describe a transclusive, collaborative publishing framework for the web.

  11. [Medical publishing in Norway 1905-2005].

    Science.gov (United States)

    Nylenna, Magne; Larsen, Øivind

    2005-06-02

    The nation-building process in Norway took mainly place before the Norwegian-Swedish union came to a close in 1905. This was not a dramatic change, though the end of the union did bring a lift to Norwegian national consciousness. In 1905 there were three general medical journals in Norway and approximately 1200 doctors. German was the most important language of international science, but most scientific publishing was done in Norwegian. After the Second World War, English became the dominating language of scientific communication. Twentieth-century medicine and medical publishing was an era of specialisation and internationalisation. Norwegian medicine has to a large extent been internationalised through Nordic cooperation, with the Nordic specialist journals being of particular importance. With increasing professionalism in research, international English-language journals have become the major channels of communication, though several Norwegian-language journals (on paper or on the internet) have been established and are of crucial importance to a national identity within medical specialties. In 2005 there is only one general medical journal in Norwegian, in a country with approximately 20,000 doctors. A national identity related to medical publishing is not given much attention, though national medicine is still closely tied in with national culture. Good clinical practice should be based on a firm knowledge of local society and local tradition. This is a challenge in contemporary medical publishing.

  12. Solution of AntiSeepage for Mengxi River Based on Numerical Simulation of Unsaturated Seepage

    Directory of Open Access Journals (Sweden)

    Youjun Ji

    2014-01-01

    Full Text Available Lessening the leakage of surface water can reduce the waste of water resources and ground water pollution. To solve the problem that Mengxi River could not store water enduringly, geology investigation, theoretical analysis, experiment research, and numerical simulation analysis were carried out. Firstly, the seepage mathematical model was established based on unsaturated seepage theory; secondly, the experimental equipment for testing hydraulic conductivity of unsaturated soil was developed to obtain the curve of two-phase flow. The numerical simulation of leakage in natural conditions proves the previous inference and leakage mechanism of river. At last, the seepage control capacities of different impervious materials were compared by numerical simulations. According to the engineering actuality, the impervious material was selected. The impervious measure in this paper has been proved to be effectible by hydrogeological research today.

  13. Numerical validation of selected computer programs in nonlinear analysis of steel frame exposed to fire

    Science.gov (United States)

    Maślak, Mariusz; Pazdanowski, Michał; Woźniczka, Piotr

    2018-01-01

    Validation of fire resistance for the same steel frame bearing structure is performed here using three different numerical models, i.e. a bar one prepared in the SAFIR environment, and two 3D models developed within the framework of Autodesk Simulation Mechanical (ASM) and an alternative one developed in the environment of the Abaqus code. The results of the computer simulations performed are compared with the experimental results obtained previously, in a laboratory fire test, on a structure having the same characteristics and subjected to the same heating regimen. Comparison of the experimental and numerically determined displacement evolution paths for selected nodes of the considered frame during the simulated fire exposure constitutes the basic criterion applied to evaluate the validity of the numerical results obtained. The experimental and numerically determined estimates of critical temperature specific to the considered frame and related to the limit state of bearing capacity in fire have been verified as well.

  14. Urethrotomy has a much lower success rate than previously reported.

    Science.gov (United States)

    Santucci, Richard; Eisenberg, Lauren

    2010-05-01

    We evaluated the success rate of direct vision internal urethrotomy as a treatment for simple male urethral strictures. A retrospective chart review was performed on 136 patients who underwent urethrotomy from January 1994 through March 2009. The Kaplan-Meier method was used to analyze stricture-free probability after the first, second, third, fourth and fifth urethrotomy. Patients with complex strictures (36) were excluded from the study for reasons including previous urethroplasty, neophallus or previous radiation, and 24 patients were lost to followup. Data were available for 76 patients. The stricture-free rate after the first urethrotomy was 8% with a median time to recurrence of 7 months. For the second urethrotomy stricture-free rate was 6% with a median time to recurrence of 9 months. For the third urethrotomy stricture-free rate was 9% with a median time to recurrence of 3 months. For procedures 4 and 5 stricture-free rate was 0% with a median time to recurrence of 20 and 8 months, respectively. Urethrotomy is a popular treatment for male urethral strictures. However, the performance characteristics are poor. Success rates were no higher than 9% in this series for first or subsequent urethrotomy during the observation period. Most of the patients in this series will be expected to experience failure with longer followup and the expected long-term success rate from any (1 through 5) urethrotomy approach is 0%. Urethrotomy should be considered a temporizing measure until definitive curative reconstruction can be planned. 2010 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  15. 15 CFR 10.13 - Withdrawal of a published standard.

    Science.gov (United States)

    2010-01-01

    ...) Before withdrawing a standard published under these procedures, the Director will review the relative... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Withdrawal of a published standard. 10... DEVELOPMENT OF VOLUNTARY PRODUCT STANDARDS § 10.13 Withdrawal of a published standard. (a) Standards published...

  16. Publisher Correction: On our bookshelf

    Science.gov (United States)

    Karouzos, Marios

    2018-03-01

    In the version of this Books and Arts originally published, the book title Spectroscopy for Amateur Astronomy was incorrect; it should have read Spectroscopy for Amateur Astronomers. This has now been corrected.

  17. 18th International Conference on Electronic Publishing

    CERN Document Server

    Dobreva, Milena

    2014-01-01

    The ways in which research data is used and handled continue to capture public attention and are the focus of increasing interest. Electronic publishing is intrinsic to digital data management, and relevant to the fields of data mining, digital publishing and social networks, with their implications for scholarly communication, information services, e-learning, e-business and the cultural heritage sector. This book presents the proceedings of the 18th International Conference on Electronic Publishing (ELPUB), held in Thessaloniki, Greece, in June 2014. The conference brings together researchers and practitioners to discuss the many aspects of electronic publishing, and the theme this year is 'Let's put data to use: digital scholarship for the next generation'. As well as examining the role of cultural heritage and service organisations in the creation, accessibility, duration and long-term preservation of data, it provides a discussion forum for the appraisal, citation and licensing of research data and the n...

  18. Promoting Diversity and Sustainability in the Scholarly Publishing Ecosystem: The University of Michigan's MPublishing Redefines the Role of Libraries in Publishing

    Science.gov (United States)

    Hawkins, Kevin S.

    2012-01-01

    MPublishing, the primary academic publishing enterprise of the University of Michigan, has united the various publishing activities of the university, all of which serve the needs of scholars and the university by fostering new publishing models that cannot exist where profit is the primary value. This article provides a brief description of…

  19. High prevalence of genetic variants previously associated with LQT syndrome in new exome data

    DEFF Research Database (Denmark)

    Refsgaard, Lena; Holst, Anders G; Sadjadieh, Golnaz

    2012-01-01

    To date, hundreds of variants in 13 genes have been associated with long QT syndrome (LQTS). The prevalence of LQTS is estimated to be between 1:2000 and 1:5000. The knowledge of genetic variation in the general population has until recently been limited, but newly published data from NHLBI GO...... variants KCNH2 P347S; SCN5A: S216L, V1951L; and CAV3 T78M in the control population (n=704) revealed prevalences comparable to those of ESP. Thus, we identified a much higher prevalence of previously LQTS-associated variants than expected in exome data from population studies. Great caution regarding...

  20. RETRACTION: Publishers' Note

    Science.gov (United States)

    post="(Executive Editor">Graeme Watt,

    2010-06-01

    Withdrawal of the paper "Was the fine-structure constant variable over cosmological time?" by L. D. Thong, N. M. Giao, N. T. Hung and T. V. Hung (EPL, 87 (2009) 69002) This paper has been formally withdrawn on ethical grounds because the article contains extensive and repeated instances of plagiarism. EPL treats all identified evidence of plagiarism in the published articles most seriously. Such unethical behaviour will not be tolerated under any circumstance. It is unfortunate that this misconduct was not detected before going to press. My thanks to Editor colleagues from other journals for bringing this fact to my attention.

  1. The changing face of corporate publishing; Corporate Publishing im Wandel. Unternehmenskommunikation im Web-2.0-Zeitalter

    Energy Technology Data Exchange (ETDEWEB)

    Bittner-Posavec, Simone [Maintext - Das Redaktionsbuero, Frankfurt am Main (Germany)

    2009-08-24

    Print media remain the cornerstone of corporate publishing in the field of both staff and customer communications, be it either inside or outside the energy sector. Not only do such publications serve to convey a sense of corporate concern, appreciation and credibility - they also act as a bridge to the internet. Yet magazines, journals and other print vehicles are now having to assert themselves in the face of electronic corporate publishing, as TV and audio media, blogs and social networks are increasingly being used as channels through which to approach customers and to enhance client retention rates. (orig.)

  2. A simple and rational numerical method of two-phase flow with volume-junction model. 2. The numerical method for general condition of two-phase flow in non-equilibrium states

    International Nuclear Information System (INIS)

    Okazaki, Motoaki

    1997-11-01

    In the previous report, the usefulness of a new numerical method to achieve a rigorous numerical calculation using a simple explicit method with the volume-junction model was presented with the verification calculation for the depressurization of a saturated two-phase mixture. In this report, on the basis of solution method above, a numerical method for general condition of two-phase flow in non-equilibrium states is presented. In general condition of two-phase flow, the combinations of saturated and non-saturated conditions of each phase are considered in the each flow of volume and junction. Numerical evaluation programs are separately prepared for each combination of flow condition. Several numerical calculations of various kinds of non-equilibrium two-phase flow are made to examine the validity of the numerical method. Calculated results showed that the thermodynamic states obtained in different solution schemes were consistent with each other. In the first scheme, the states are determined by using the steam table as a function of pressure and specific enthalpy which are obtained as the solutions of simultaneous equations. In the second scheme, density and specific enthalpy of each phase are directly calculated by using conservation equations of mass and enthalpy of each phase, respectively. Further, no accumulation of error in mass and energy was found. As for the specific enthalpy, two cases of using energy equations for the volume are examined. The first case uses total energy conservation equation and the second case uses the type of the first law of thermodynamics. The results of both cases agreed well. (author)

  3. Places, Publishers and Personal Ties; the relational qualities of urban environments for book publishers

    NARCIS (Netherlands)

    Heebels, B.; van Aalst, I.; Atzema, O.A.L.C.

    2014-01-01

    Book publishers act as cultural mediators. Personal networks and face-to-face contacts with authors, booksellers, colleagues and people from the press are crucial for their business. This is in accordance with the literature on cultural entrepreneurship, which emphasizes the importance of informal

  4. Publish or perish: authorship and peer review

    Science.gov (United States)

    Publish or perish is defined in Wikipedia as the pressure to publish work constantly to further or sustain one’s career in academia. This is an apt description given that refereed scientific publications are the currency of science and the primary means for broad dissemination of knowledge. Professi...

  5. Pages from the Desktop: Desktop Publishing Today.

    Science.gov (United States)

    Crawford, Walt

    1994-01-01

    Discusses changes that have made desktop publishing appealing and reasonably priced. Hardware, software, and printer options for getting started and moving on, typeface developments, and the key characteristics of desktop publishing are described. The author's notes on 33 articles from the personal computing literature from January-March 1994 are…

  6. Desktop Publishing in a PC-Based Environment.

    Science.gov (United States)

    Sims, Harold A.

    1987-01-01

    Identifies, considers, and interrelates the functionality of hardware, firmware, and software types; discusses the relationship of input and output devices in the PC-based desktop publishing environment; and reports some of what has been experienced in three years of working intensively in/with desktop publishing devices and solutions. (MES)

  7. ATLASES—THE NEW FASCINATION OF FRENCH PUBLISHERS

    Directory of Open Access Journals (Sweden)

    Jean Radvanyi

    2011-01-01

    Full Text Available Reacting to reader interest in publications of new types of atlases, many French authors and publishers rushed to occupy an emerging publishing niche and created a real fashion of small atlases attracting ever-greater public attention. The paper describes origins and features of this phenomenon.

  8. Electronic Publishing in Science: Changes and Risks.

    Science.gov (United States)

    Kinne, Otto

    1999-01-01

    Discussion of the Internet and the guidance of the World Wide Web Consortium focuses on scientific communication and electronic publishing. Considers the speed of communicating and disseminating information; quality issues; cost; library subscriptions; publishers; and risks and concerns, including the role of editors and reviewers or referees.…

  9. Another Interface: Electronic Publishing and Technical Services.

    Science.gov (United States)

    Yamamoto, Rumi

    1986-01-01

    Discusses the problems of assimilating electronic publishing within the technical services area of academic libraries: whether to consider electronic journals as acquisitions; how to catalog them; whether to charge users for access to them; and how to preserve online publications for future research. Future trends in electronic publishing are…

  10. New population-based exome data are questioning the pathogenicity of previously cardiomyopathy-associated genetic variants

    DEFF Research Database (Denmark)

    Andreasen, Charlotte Hartig; Nielsen, Jonas B; Refsgaard, Lena

    2013-01-01

    Cardiomyopathies are a heterogeneous group of diseases with various etiologies. We focused on three genetically determined cardiomyopathies: hypertrophic (HCM), dilated (DCM), and arrhythmogenic right ventricular cardiomyopathy (ARVC). Eighty-four genes have so far been associated with these card......Cardiomyopathies are a heterogeneous group of diseases with various etiologies. We focused on three genetically determined cardiomyopathies: hypertrophic (HCM), dilated (DCM), and arrhythmogenic right ventricular cardiomyopathy (ARVC). Eighty-four genes have so far been associated...... with these cardiomyopathies, but the disease-causing effect of reported variants is often dubious. In order to identify possible false-positive variants, we investigated the prevalence of previously reported cardiomyopathy-associated variants in recently published exome data. We searched for reported missense and nonsense...... variants in the NHLBI-Go Exome Sequencing Project (ESP) containing exome data from 6500 individuals. In ESP, we identified 94 variants out of 687 (14%) variants previously associated with HCM, 58 out of 337 (17%) variants associated with DCM, and 38 variants out of 209 (18%) associated with ARVC...

  11. Advances in semantic authoring and publishing

    CERN Document Server

    Groza, T

    2012-01-01

    Dissemination can be seen as a communication process between scientists. Over the course of several publications, they expose and support their findings, while discussing stated claims. Such discourse structures are trapped within the content of the publications, thus making the semantics discoverable only by humans. In addition, the lack of advances in scientific publishing, where electronic publications are still used as simple projections of paper documents, combined with the current growth in the amount of scientific research being published, transforms the process of finding relevant lite

  12. Endorsement of PRISMA statement and quality of systematic reviews and meta-analyses published in nursing journals: a cross-sectional study.

    Science.gov (United States)

    Tam, Wilson W S; Lo, Kenneth K H; Khalechelvam, Parames

    2017-02-07

    Systematic reviews (SRs) often poorly report key information, thereby diminishing their usefulness. Previous studies evaluated published SRs and determined that they failed to meet explicit criteria or characteristics. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement was recommended as a reporting guideline for SR and meta-analysis (MA), but previous studies showed that adherence to the statement was not high for SRs published in different medical fields. Thus, the aims of this study are twofold: (1) to investigate the number of nursing journals that have required or recommended the use of the PRISMA statement for reporting SR, and (2) to examine the adherence of SRs and/or meta-analyses to the PRISMA statement published in nursing journals. A cross-sectional study. Nursing journals listed in the ISI journal citation report were divided into 2 groups based on the recommendation of PRISMA statement in their 'Instruction for Authors'. SRs and meta-analyses published in 2014 were searched in 3 databases. 37 SRs and meta-analyses were randomly selected in each group. The adherence of each item to the PRISMA was examined and summarised using descriptive statistics. The quality of the SRs was assessed by Assessing the Methodological Quality of Systematic Reviews. The differences between the 2 groups were compared using the Mann-Whitney U test. Out of 107 nursing journals, 30 (28.0%) recommended or required authors to follow the PRISMA statement when they submit SRs or meta-analyses. The median rates of adherence to the PRISMA statement for reviews published in journals with and without PRISMA endorsement were 64.9% (IQR: 17.6-92.3%) and 73.0% (IQR: 59.5-94.6%), respectively. No significant difference was observed in any of the items between the 2 groups. The median adherence of SRs and meta-analyses in nursing journals to PRISMA is low at 64.9% and 73.0%, respectively. Nonetheless, the adherence level of nursing journals to the

  13. Numerical conversion efficiency of thermally isolated Seebeck nanoantennas

    Directory of Open Access Journals (Sweden)

    Edgar Briones

    2016-11-01

    Full Text Available In this letter, we evaluate the conversion efficiency of thermally isolated Seebeck nanoantennas by numerical simulations and discuss their uses and scope for energy harvesting applications. This analysis includes the simple case of titanium-nickel dipoles suspended in air above the substrate by a 200 nm silicon dioxide membrane to isolate the heat dissipation. Results show that substantially thermal gradients are induced along the devices leading to a harvesting efficiency around 10-4 %, 400 % higher than the previously reported Seebeck nanoantennas. In the light of these results, different optimizing strategies should be considered in order to make the Seebeck nanoantennas useful for harvesting applications.

  14. Numerical analysis

    CERN Document Server

    Brezinski, C

    2012-01-01

    Numerical analysis has witnessed many significant developments in the 20th century. This book brings together 16 papers dealing with historical developments, survey papers and papers on recent trends in selected areas of numerical analysis, such as: approximation and interpolation, solution of linear systems and eigenvalue problems, iterative methods, quadrature rules, solution of ordinary-, partial- and integral equations. The papers are reprinted from the 7-volume project of the Journal of Computational and Applied Mathematics on '/homepage/sac/cam/na2000/index.html<

  15. Reaching the grassroots: publishing methodologies for development organizations.

    Science.gov (United States)

    Zielinski, C

    1987-01-01

    There are 3 major distinctions between the traditional form of academic publishing and publishing for the grassroots as a development-organization activity, particularly in developing countries. Whereas academic publishing seeks to cover the target audience in its entirety, grassroots publishing can only cover a sampling. Academic publishing fulfills a need, while grassroots publishing demonstrates a need and a way to fulfill it. Finally, whereas academic publishing is largely a support activity aimed at facilitating the dissemination of information as a relatively minor part of a technical program, grassroots publishing is a more substantive activity aimed at producing a catalytic effect. Publication for the grassroots further calls for a different methodological approach. Given the constraint of numbers, publications aimed at the grassroots can only be examples or prototypes. The function of a prototype is to serve both as a basis for translation, adaptation, and replication and as a model end result. The approach to the use and promotion of prototypes differs according to the specific country situation. In countries with a heterogenous culture or several different languages, 2 items should be produced: a prototype of the complete text, which should be pretested and evaluated, and a prototype adaptation kit stripped of cultural and social biases. Promotion of the translation and replication of a publication can be achieved by involving officials at the various levels of government, interesting international and voluntary funding agencies, and stimulating indigenous printing capacities at the community level. The most important factors are the appropriateness of the publication in solving specific priority problems and the interest and involvement of national and state authorities at all stages of the project.

  16. PSYCHOLOGY IN FRENCH ACADEMIC PUBLISHING IN THE LATE NINETEENTH CENTURY: ALFRED BINET, EDITORIAL DIRECTOR AT THE SCHLEICHER PUBLISHING HOUSE.

    Science.gov (United States)

    Nicolas, Serge

    2015-01-01

    To date, historians of psychology have largely ignored the role of academic publishing and the editorial policies of the late nineteenth century. This paper analyzes the role played by academic publishing in the history of psychology in the specific case of France, a country that provides a very interesting and unique model. Up until the middle of the 1890s, there was no collection specifically dedicated to psychology. Alfred Binet was the first to found, in 1897, a collection of works specifically dedicated to scientific psychology. He chose to work with Reinwald-Schleicher. However, Binet was soon confronted with (1) competition from other French publishing houses, and (2) Schleicher's management and editorial problems that were to sound the death knell for Binet's emerging editorial ambitions. The intention of this paper is to encourage the efforts of the pioneers of modern psychology to have their work published and disseminated. © 2015 Wiley Periodicals, Inc.

  17. Numerical experiments to investigate the accuracy of broad-band moment magnitude, Mwp

    Science.gov (United States)

    Hara, Tatsuhiko; Nishimura, Naoki

    2011-12-01

    We perform numerical experiments to investigate the accuracy of broad-band moment magnitude, Mwp. We conduct these experiments by measuring Mwp from synthetic seismograms and comparing the resulting values to the moment magnitudes used in the calculation of synthetic seismograms. In the numerical experiments using point sources, we have found that there is a significant dependence of Mwp on focal mechanisms, and that depths phases have a large impact on Mwp estimates, especially for large shallow earthquakes. Numerical experiments using line sources suggest that the effects of source finiteness and rupture propagation on Mwp estimates are on the order of 0.2 magnitude units for vertical fault planes with pure dip-slip mechanisms and 45° dipping fault planes with pure dip-slip (thrust) mechanisms, but that the dependence is small for strike-slip events on a vertical fault plane. Numerical experiments for huge thrust faulting earthquakes on a fault plane with a shallow dip angle suggest that the Mwp estimates do not saturate in the moment magnitude range between 8 and 9, although they are underestimates. Our results are consistent with previous studies that compared Mwp estimates to moment magnitudes calculated from seismic moment tensors obtained by analyses of observed data.

  18. A numerical study of bubble interactions in Rayleigh--Taylor instability for compressible fluids

    International Nuclear Information System (INIS)

    Glimm, J.; Li, X.L.; Menikoff, R.; Sharp, D.H.; Zhang, Q.

    1990-01-01

    The late nonlinear and chaotic stage of Rayleigh--Taylor instability is characterized by the evolution of bubbles of the light fluid and spikes of the heavy fluid, each penetrating into the other phase. This paper is focused on the numerical study of bubble interactions and their effect on the statistical behavior and evolution of the bubble envelope. Compressible fluids described by the two-fluid Euler equations are considered and the front tracking method for numerical simulation of these equations is used. Two major phenomena are studied. One is the dynamics of the bubbles in a chaotic environment and the interaction among neighboring bubbles. Another one is the acceleration of the overall bubble envelope, which is a statistical consequence of the interactions of bubbles. The main result is a consistent analysis, at least in the approximately incompressible case of these two phenomena. The consistency encompasses the analysis of experiments, numerical simulation, simple theoretical models, and variation of parameters. Numerical simulation results that are in quantitative agreement with laboratory experiment for one-and-one-half (1 1/2) generations of bubble merger are presented. To the authors' knowledge, computations of this accuracy have not previously been obtained

  19. 44 CFR 5.21 - Effect of failure to publish.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Effect of failure to publish... failure to publish. 5 U.S.C. 552(a)(1) provides that, except to the extent that a person has actual and... adversely affected by, a matter required to be published in the Federal Register and not so published. ...

  20. Total hip arthroplasty after a previous pelvic osteotomy: A systematic review and meta-analysis.

    Science.gov (United States)

    Shigemura, T; Yamamoto, Y; Murata, Y; Sato, T; Tsuchiya, R; Wada, Y

    2018-06-01

    There are several reports regarding total hip arthroplasty (THA) after a previous pelvic osteotomy (PO). However, to our knowledge, until now there has been no formal systematic review and meta-analysis published to summarize the clinical results of THA after a previous PO. Therefore, we conducted a systematic review and meta-analysis of results of THA after a previous PO. We focus on these questions as follows: does a previous PO affect the results of subsequent THA, such as clinical outcomes, operative time, operative blood loss, and radiological parameters. Using PubMed, Web of Science, and Cochrane Library, we searched for relevant original papers. The pooling of data was performed using RevMan software (version 5.3, Cochrane Collaboration, Oxford, UK). A p-value50%, significant heterogeneity was assumed and a random-effects model was applied for the meta-analysis. A fixed-effects model was applied in the absence of significant heterogeneity. Eleven studies were included in this meta-analysis. The pooled results indicated that there was no significant difference in postoperative Merle D'Aubigne-Postel score (I 2 =0%, SMD=-0.15, 95% CI: -0.36 to 0.06, p=0.17), postoperative Harris hip score (I 2 =60%, SMD=-0.23, 95% CI: -0.50 to 0.05, p=0.10), operative time (I 2 =86%, SMD=0.37, 95% CI: -0.09 to 0.82, p=0.11), operative blood loss (I 2 =82%, SMD=0.23, 95% CI: -0.17 to 0.63, p=0.25), and cup abduction angle (I 2 =43%, SMD=-0.08, 95% CI: -0.25 to 0.09, p=0.38) between THA with and without a previous PO. However, cup anteversion angle of THA with a previous PO was significantly smaller than that of without a previous PO (I 2 =77%, SMD=-0.63, 95% CI: -1.13 to -0.13, p=0.01). Systematic review and meta-analysis of results of THA after a previous PO was performed. A previous PO did not affect the results of subsequent THA, except for cup anteversion. Because of the low quality evidence currently available, high-quality randomized controlled trials are required