WorldWideScience

Sample records for previously published calculations

  1. Is email a reliable means of contacting authors of previously published papers? A study of the Emergency Medicine Journal for 2001.

    Science.gov (United States)

    O'Leary, F

    2003-07-01

    To determine whether it is possible to contact authors of previously published papers via email. A cross sectional study of the Emergency Medicine Journal for 2001. 118 articles were included in the study. The response rate from those with valid email addresses was 73%. There was no statistical difference between the type of email address used and the address being invalid (p=0.392) or between the type of article and the likelihood of a reply (p=0.197). More responses were obtained from work addresses when compared with Hotmail addresses (86% v 57%, p=0.02). Email is a valid means of contacting authors of previously published articles, particularly within the emergency medicine specialty. A work based email address may be a more valid means of contact than a Hotmail address.

  2. Parametrisation of linear accelerator electron beam for computerised dosimetry calculations

    International Nuclear Information System (INIS)

    Millan, P.E.; Millan, S.; Hernandez, A.; Andreo, P.

    1979-01-01

    A previously published age-diffusion model has been adapted to obtain parameters for the Saggittaire linear accelerator electron beams. The calculations are shown and the results discussed. A comparison is presented between measured and predicted percentage depth doses for electron beams at various energies between 10 and 32 MeV. Theoretical isodose curves are compared, for an energy of 10 MeV, with experimental curves. The parameters obtained are used for computer electron isodose curve calculation in a program called FIJOE adapted from a previously published program. This program makes it possible to correct for irregular body contours, but not for internal inhomogeneities. (UK)

  3. The ratio of ICRP103 to ICRP60 calculated effective doses from CT: Monte Carlo calculations with the ADELAIDE voxel paediatric model and comparisons with published values

    International Nuclear Information System (INIS)

    Caon, Martin

    2013-01-01

    The ADELAIDE voxel model of paediatric anatomy was used with the EGSnrc Monte Carlo code to compare effective dose from computed tomography (CT) calculated with both the ICRP103 and ICRP60 definitions which are different in their tissue weighting factors and in the included tissues. The new tissue weighting factors resulted in a lower effective dose for pelvis CT (than if calculated using ICRP60 tissue weighting factors), by 6.5 % but higher effective doses for all other examinations. ICRP103 calculated effective dose for CT abdomen + pelvis was higher by 4.6 %, for CT abdomen (by 9.5 %), for CT chest + abdomen + pelvis (by 6 %), for CT chest + abdomen (by 9.6 %), for CT chest (by 10.1 %) and for cardiac CT (by 11.5 %). These values, along with published values of effective dose from CT that were calculated for both sets of tissue weighting factors were used to determine single values for the ratio ICRP103:ICRP60 calculated effective doses from CT, for seven CT examinations. The following values for ICRP103:ICRP60 are suggested for use to convert ICRP60 calculated effective dose to ICRP103 calculated effective dose for the following CT examinations: Pelvis CT, 0.75; for abdomen CT, abdomen + pelvis CT, chest + abdomen + pelvis CT, 1.00; for chest + abdomen CT, and for chest CT. 1.15; for cardiac CT 1.25.

  4. A comparison of published methods of calculation of defect significance

    International Nuclear Information System (INIS)

    Ingham, T.; Harrison, R.P.

    1982-01-01

    This paper presents some of the results obtained in a round-robin calculational exercise organised by the OECD Committee on the Safety of Nuclear Installations (CSNI). The exercise was initiated to examine practical aspects of using documented elastic-plastic fracture mechanics methods to calculate defect significance. The extent to which the objectives of the exercise were met is illustrated using solutions to 'standard' problems produced by UKAEA and CEGB using the methods given in ASME XI, Appendix A, BSI PD6493, and the CEGB R/H/R6 Document. Differences in critical or tolerable defect size defined using these procedures are examined in terms of their different treatments and reasons for discrepancies are discussed. (author)

  5. Availability of nuclear decay data in electronic form, including beta spectra not previously published

    International Nuclear Information System (INIS)

    Eckerman, K.F.; Westfall, R.J.; Ryman, J.C.; Cristy, M.

    1994-01-01

    The unabridged data used in preparing ICRP Publication 38 (1983) and a monograph of the Medical Internal Radiation Dose (MIRD) Committee are now available in electronic form. The open-quotes ICRP38 collectionclose quotes contains data on the energies and intensities of radiations emitted by 825 radionuclides (those in ICRP Publication 38 plus 13 from the MIRD monograph), and the open-quotes MIRD collectionclose quotes contains data on 242 radionuclides. Each collection consists of a radiations data file and a beta spectra data file. The radiations data file contains the complete listing of the emitted radiations, their types, mean or unique energies, and absolute intensities for each radionuclide, the probability that a beta particle will be emitted with kinetic energies defined by a standard energy grid. Although summary information from the radiation data files has been published, neither the unabridged data nor the beta spectra have been published. These data files and a data extraction utility, which runs on a personal computer, are available from the Radiation Shielding Information Center at Oak Ridge National Laboratory. 13 refs., 1 fig., 6 tabs

  6. Compilation of new and previously published geochemical and modal data for Mesoproterozoic igneous rocks of the St. Francois Mountains, southeast Missouri

    Science.gov (United States)

    du Bray, Edward A.; Day, Warren C.; Meighan, Corey J.

    2018-04-16

    The purpose of this report is to present recently acquired as well as previously published geochemical and modal petrographic data for igneous rocks in the St. Francois Mountains, southeast Missouri, as part of an ongoing effort to understand the regional geology and ore deposits of the Mesoproterozoic basement rocks of southeast Missouri, USA. The report includes geochemical data that is (1) newly acquired by the U.S. Geological Survey and (2) compiled from numerous sources published during the last fifty-five years. These data are required for ongoing petrogenetic investigations of these rocks. Voluminous Mesoproterozoic igneous rocks in the St. Francois Mountains of southeast Missouri constitute the basement buried beneath Paleozoic sedimentary rock that is over 600 meters thick in places. The Mesoproterozoic rocks of southeast Missouri represent a significant component of approximately 1.4 billion-year-old (Ga) igneous rocks that crop out extensively in North America along the southeast margin of Laurentia and subsequent researchers suggested that iron oxide-copper deposits in the St. Francois Mountains are genetically associated with ca. 1.4 Ga magmatism in this region. The geochemical and modal data sets described herein were compiled to support investigations concerning the tectonic setting and petrologic processes responsible for the associated magmatism.

  7. List of new names and new combinations previously effectively, but not validly, published.

    Science.gov (United States)

    2008-09-01

    The purpose of this announcement is to effect the valid publication of the following effectively published new names and new combinations under the procedure described in the Bacteriological Code (1990 Revision). Authors and other individuals wishing to have new names and/or combinations included in future lists should send three copies of the pertinent reprint or photocopies thereof, or an electronic copy of the published paper, to the IJSEM Editorial Office for confirmation that all of the other requirements for valid publication have been met. It is also a requirement of IJSEM and the ICSP that authors of new species, new subspecies and new combinations provide evidence that types are deposited in two recognized culture collections in two different countries (i.e. documents certifying deposition and availability of type strains). It should be noted that the date of valid publication of these new names and combinations is the date of publication of this list, not the date of the original publication of the names and combinations. The authors of the new names and combinations are as given below, and these authors' names will be included in the author index of the present issue and in the volume author index. Inclusion of a name on these lists validates the publication of the name and thereby makes it available in bacteriological nomenclature. The inclusion of a name on this list is not to be construed as taxonomic acceptance of the taxon to which the name is applied. Indeed, some of these names may, in time, be shown to be synonyms, or the organisms may be transferred to another genus, thus necessitating the creation of a new combination.

  8. Transition to electronic publishing

    Science.gov (United States)

    Bowning, Sam

    Previous communications have described some of the many changes that will occur in the next few months as AGU makes the transition to fully electronic publishing. With the advent of the new AGU electronic publishing system, manuscripts will be submitted, edited, reviewed, and published in electronic formats. This piece discusses how the electronic journals will differ from the print journals. Electronic publishing will require some adjustments to the ways we currently think about journals from our perspective of standard print versions. Visiting the Web site of AGU's Geochemistry, Geophysics, Geosystems (G-Cubed) is a great way to get familiar with the look and feel of electronic publishing. However, protocols, especially for citations of articles, are still evolving. Some of the biggest changes for users of AGU publications may be the lack of page numbers, the use of a unique identifier (DOI),and changes in citation style.

  9. Calculation of quality factor for monoenergetic neutrons - in accordance with ICRU Report 40

    International Nuclear Information System (INIS)

    Bregadze, Y.I.; Maslyaev, P.F.; Nurlibaev, K.N.

    1988-01-01

    The quality factors for heavy particle dose in tissue from first interactions of monoenergetic neutrons calculated directly from the new quality factor determination given in ICRU Report 40 are presented as a function of neutron energy. The results of the calculation are compared with previously published calculations based on old concepts. For neutron energies from 100 keV up to 1 MeV these differences are about a factor of two. (author)

  10. Using the genome aggregation database, computational pathogenicity prediction tools, and patch clamp heterologous expression studies to demote previously published long QT syndrome type 1 mutations from pathogenic to benign.

    Science.gov (United States)

    Clemens, Daniel J; Lentino, Anne R; Kapplinger, Jamie D; Ye, Dan; Zhou, Wei; Tester, David J; Ackerman, Michael J

    2018-04-01

    Mutations in the KCNQ1-encoded Kv7.1 potassium channel cause long QT syndrome (LQTS) type 1 (LQT1). It has been suggested that ∼10%-20% of rare LQTS case-derived variants in the literature may have been published erroneously as LQT1-causative mutations and may be "false positives." The purpose of this study was to determine which previously published KCNQ1 case variants are likely false positives. A list of all published, case-derived KCNQ1 missense variants (MVs) was compiled. The occurrence of each MV within the Genome Aggregation Database (gnomAD) was assessed. Eight in silico tools were used to predict each variant's pathogenicity. Case-derived variants that were either (1) too frequently found in gnomAD or (2) absent in gnomAD but predicted to be pathogenic by ≤2 tools were considered potential false positives. Three of these variants were characterized functionally using whole-cell patch clamp technique. Overall, there were 244 KCNQ1 case-derived MVs. Of these, 29 (12%) were seen in ≥10 individuals in gnomAD and are demotable. However, 157 of 244 MVs (64%) were absent in gnomAD. Of these, 7 (4%) were predicted to be pathogenic by ≤2 tools, 3 of which we characterized functionally. There was no significant difference in current density between heterozygous KCNQ1-F127L, -P477L, or -L619M variant-containing channels compared to KCNQ1-WT. This study offers preliminary evidence for the demotion of 32 (13%) previously published LQT1 MVs. Of these, 29 were demoted because of their frequent sighting in gnomAD. Additionally, in silico analysis and in vitro functional studies have facilitated the demotion of 3 ultra-rare MVs (F127L, P477L, L619M). Copyright © 2017 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

  11. Sensitivity of NTCP parameter values against a change of dose calculation algorithm

    International Nuclear Information System (INIS)

    Brink, Carsten; Berg, Martin; Nielsen, Morten

    2007-01-01

    Optimization of radiation treatment planning requires estimations of the normal tissue complication probability (NTCP). A number of models exist that estimate NTCP from a calculated dose distribution. Since different dose calculation algorithms use different approximations the dose distributions predicted for a given treatment will in general depend on the algorithm. The purpose of this work is to test whether the optimal NTCP parameter values change significantly when the dose calculation algorithm is changed. The treatment plans for 17 breast cancer patients have retrospectively been recalculated with a collapsed cone algorithm (CC) to compare the NTCP estimates for radiation pneumonitis with those obtained from the clinically used pencil beam algorithm (PB). For the PB calculations the NTCP parameters were taken from previously published values for three different models. For the CC calculations the parameters were fitted to give the same NTCP as for the PB calculations. This paper demonstrates that significant shifts of the NTCP parameter values are observed for three models, comparable in magnitude to the uncertainties of the published parameter values. Thus, it is important to quote the applied dose calculation algorithm when reporting estimates of NTCP parameters in order to ensure correct use of the models

  12. Benchmark calculations by KENO-Va using the JEF 2.2 library

    Energy Technology Data Exchange (ETDEWEB)

    Markova, L.

    1994-12-01

    This work has to be a contribution to the validation of the JEF2.2 neutron cross-section libarary, following the earlier published benchmark calculations having been performed to validate the previous version JEF1.1 of the libarary. Several simple calculational problems and one experimental problem were chosen for a criticality calculations. In addition also a realistic hexagonal arrangement of the VVER-440 fuel assemblies in a spent fuel cask were analyzed in a partly cylindrized model. All criticality calculations, carried out by the KENO-Va code using the JEF2.2 neutron cross-section library in 172 energy groups, resulted in multiplication factors (k{sub eff}) which were tabulated and compared with the results of other available calculations of the same problems. (orig.).

  13. Pencil kernel correction and residual error estimation for quality-index-based dose calculations

    International Nuclear Information System (INIS)

    Nyholm, Tufve; Olofsson, Joergen; Ahnesjoe, Anders; Georg, Dietmar; Karlsson, Mikael

    2006-01-01

    Experimental data from 593 photon beams were used to quantify the errors in dose calculations using a previously published pencil kernel model. A correction of the kernel was derived in order to remove the observed systematic errors. The remaining residual error for individual beams was modelled through uncertainty associated with the kernel model. The methods were tested against an independent set of measurements. No significant systematic error was observed in the calculations using the derived correction of the kernel and the remaining random errors were found to be adequately predicted by the proposed method

  14. Calculating meal glycemic index by using measured and published food values compared with directly measured meal glycemic index.

    Science.gov (United States)

    Dodd, Hayley; Williams, Sheila; Brown, Rachel; Venn, Bernard

    2011-10-01

    Glycemic index (GI) testing is normally based on individual foods, whereas GIs for meals or diets are based on a formula using a weighted sum of the constituents. The accuracy with which the formula can predict a meal or diet GI is questionable. Our objective was to compare the GI of meals, obtained by using the formula and by using both measured food GI and published values, with directly measured meal GIs. The GIs of 7 foods were tested in 30 healthy people. The foods were combined into 3 meals, each of which provided 50 g available carbohydrate, including a staple (potato, rice, or spaghetti), vegetables, sauce, and pan-fried chicken. The mean (95% CI) meal GIs determined from individual food GI values and by direct measurement were as follows: potato meal [predicted, 63 (56, 70); measured, 53 (46, 62)], rice meal [predicted, 51 (45, 56); measured, 38 (33, 45)], and spaghetti meal [predicted, 54 (49, 60); measured, 38 (33, 44)]. The predicted meal GIs were all higher than the measured GIs (P < 0.001). The extent of the overestimation depended on the particular food, ie, 12, 15, and 19 GI units (or 22%, 40%, and 50%) for the potato, rice, and spaghetti meals, respectively. The formula overestimated the GI of the meals by between 22% and 50%. The use of published food values also overestimated the measured meal GIs. Investigators using the formula to calculate a meal or diet GI should be aware of limitations in the method. This trial is registered with the Australian and New Zealand Clinical Trials Registry as ACTRN12611000210976.

  15. One-loop calculations with massive particles

    International Nuclear Information System (INIS)

    Oldenborgh, G.J. van.

    1990-01-01

    In this thesis some techniques for performing one-loop calculations with massive particles are presented. Numerical techniques are presented necessary for evaluating one-loop integrals which occur in one-loop calculations of photon-photon scattering. The algorithms have been coded in FORTRAN (to evaluate the scalar integrals) and the algebraic language FORM (to reduce the tensor integrals to scalar integrals). Applications are made in the theory of the strong interaction, QCD, i.e. in handling one-loop integrals with massive particles, in order to regulate the infinities by mass parameters encountered in this theory. However this simplifies the computation considerably, the description of the proton structure functions have to be renormalized in order to obtain physical results. This renormalization is different from the published results for the gluon and thus has to be redone. The first physics results that have been obtained with these new methods are presented. These concern heavy quark production in semi-leptonic interactions, for instance neutrino charm production and top production at the electron-proton (ep) collider HERA and the proposed LEP/LHC combination. Total and differential cross-sections for one-loop corrections to top production at the HERA and proposed LEP/HLC ep colliders are given and structure functions for charmed quark production are compared with previously published results. (author). 58 refs.; 18 figs.; 5 tabs

  16. Green's tensor calculations of plasmon resonances of single holes and hole pairs in thin gold films

    International Nuclear Information System (INIS)

    Alegret, Joan; Kaell, Mikael; Johansson, Peter

    2008-01-01

    We present numerical calculations of the plasmon properties of single-hole and hole-pair structures in optically thin gold films obtained with the Green's tensor formalism for stratified media. The method can be used to obtain the optical properties of a given hole system, without problems associated with the truncation of the infinite metal film. The calculations are compared with previously published experimental data and an excellent agreement is found. In particular, the calculations are shown to reproduce the evolution of the hole plasmon resonance spectrum as a function of hole diameter, film thickness and hole separation.

  17. Calculation of crystalline lens power in chickens with a customized version of Bennett's equation.

    Science.gov (United States)

    Iribarren, Rafael; Rozema, Jos J; Schaeffel, Frank; Morgan, Ian G

    2014-03-01

    This paper customizes Bennett's equation for calculating lens power in chicken eyes from refraction, keratometry and biometry. Previously published data on refraction, corneal power, anterior chamber depth, lens thickness, lens radii of curvature, axial length and eye power in chickens aged 10-90 days were used to estimate Gullstrand's lens power and Bennett's lens power for chicken eyes, and to calculate the lens equivalent refractive index. Bennett's A and B constants for the front and back surface powers of the lens were calculated for data measured from day 10 to 90 at 10 day intervals, and mean customized constants were calculated. The mean customized constants for Bennett's equation for chicks were A=0.574±0.023 and B=0.379±0.021. As found previously, lens power decreases with age in chicks, while corneal power decreases and axial length increases. The lens equivalent refractive index decreases with age from 10 to 90 days after hatching. Bennett's equation can be used to calculate lens power in chicken eyes for studies on animal myopia, using standard biometry. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Publishing with XML structure, enter, publish

    CERN Document Server

    Prost, Bernard

    2015-01-01

    XML is now at the heart of book publishing techniques: it provides the industry with a robust, flexible format which is relatively easy to manipulate. Above all, it preserves the future: the XML text becomes a genuine tactical asset enabling publishers to respond quickly to market demands. When new publishing media appear, it will be possible to very quickly make your editorial content available at a lower cost. On the downside, XML can become a bottomless pit for publishers attracted by its possibilities. There is a strong temptation to switch to audiovisual production and to add video and a

  19. Adding glycaemic index and glycaemic load functionality to DietPLUS, a Malaysian food composition database and diet intake calculator.

    Science.gov (United States)

    Shyam, Sangeetha; Wai, Tony Ng Kock; Arshad, Fatimah

    2012-01-01

    This paper outlines the methodology to add glycaemic index (GI) and glycaemic load (GL) functionality to food DietPLUS, a Microsoft Excel-based Malaysian food composition database and diet intake calculator. Locally determined GI values and published international GI databases were used as the source of GI values. Previously published methodology for GI value assignment was modified to add GI and GL calculators to the database. Two popular local low GI foods were added to the DietPLUS database, bringing up the total number of foods in the database to 838 foods. Overall, in relation to the 539 major carbohydrate foods in the Malaysian Food Composition Database, 243 (45%) food items had local Malaysian values or were directly matched to International GI database and another 180 (33%) of the foods were linked to closely-related foods in the GI databases used. The mean ± SD dietary GI and GL of the dietary intake of 63 women with previous gestational diabetes mellitus, calculated using DietPLUS version3 were, 62 ± 6 and 142 ± 45, respectively. These values were comparable to those reported from other local studies. DietPLUS version3, a simple Microsoft Excel-based programme aids calculation of diet GI and GL for Malaysian diets based on food records.

  20. Thomas Jefferson, Page Design, and Desktop Publishing.

    Science.gov (United States)

    Hartley, James

    1991-01-01

    Discussion of page design for desktop publishing focuses on the importance of functional issues as opposed to aesthetic issues, and criticizes a previous article that stressed aesthetic issues. Topics discussed include balance, consistency in text structure, and how differences in layout affect the clarity of "The Declaration of…

  1. "My math and me": Nursing students' previous experiences in learning mathematics.

    Science.gov (United States)

    Røykenes, Kari

    2016-01-01

    In this paper, 11 narratives about former experiences in learning of mathematics written by nursing students are thematically analyzed. Most students had a positive relationship with the subject in primary school, when they found mathematics fun and were able to master the subject. For some, a change occurred in the transition to lower secondary school. The reasons for this change was found in the subject (increased difficulty), the teachers (movement of teachers, numerous substitute teachers), the class environment and size (many pupils, noise), and the student him- or herself (silent and anonymous pupil). This change was also found in the transition from lower to higher secondary school. By contrast, some students had experienced changes that were positive, and their mathematics teacher was a significant factor in this positive change. The paper emphasizes the importance of previous experiences in learning mathematics to nursing students when learning about drug calculation. Copyright © 2015. Published by Elsevier Ltd.

  2. Photon Splitting in a Strong Magnetic Field: Recalculation and Comparison with Previous Calculations

    International Nuclear Information System (INIS)

    Adler, S.L.; Schubert, C.

    1996-01-01

    We recalculate the amplitude for photon splitting in a strong magnetic field below the pair production threshold, using the world line path integral variant of the Bern-Kosower formalism. Numerical comparison (using programs that we have made available for public access on the Internet) shows that the results of the recalculation are identical to the earlier calculations of Adler and later of Stoneham, and to the recent recalculation by Baier, Milstein, and Shaisultanov. copyright 1996 The American Physical Society

  3. Description of a stable scheme for steady-state coupled Monte Carlo–thermal–hydraulic calculations

    International Nuclear Information System (INIS)

    Dufek, Jan; Eduard Hoogenboom, J.

    2014-01-01

    Highlights: • A stable coupling scheme for steady-state MC–TH calculations is described. • The coupling scheme is based on the stochastic approximation method. • The neutron flux (or power) distribution is relaxed using a variable step-size. - Abstract: We provide a detailed description of a numerically stable and efficient coupling scheme for steady-state Monte Carlo neutronic calculations with thermal–hydraulic feedback. While we have previously derived and published the stochastic approximation based method for coupling the Monte Carlo criticality and thermal–hydraulic calculations, its possible implementation has not been described in a step-by-step manner. As the simple description of the coupling scheme was repeatedly requested from us, we have decided to make it available via this note

  4. What comes first? Publishing business or publishing studies?

    Directory of Open Access Journals (Sweden)

    Josipa Selthofer

    2015-07-01

    Full Text Available The aim of this paper is to analyze and compare publishing studies, their programmes at the undergraduate and graduate levels and scholars involved in the teaching of publishing courses at the top universities around the world and in Croatia. Since traditional publishing business is rapidly changing, new skills and new jobs are involved in it. The main research question is: Can modern publishing studies produce a modern publisher? Or, is it the other way around? The hypothesis of the paper is that scholars involved in the teaching of publishing courses at the top universities around the world have a background in publishing business. So, can they prepare their students for the future and can their students gain competencies they need to compete in a confusing world of digital authors and electronic books? The research methods used were content analysis and comparison. Research sample included 36 university publishing programmes at the undergraduate and graduate level worldwide (24 MA, 12 BA. The research sample was limited mainly to the English-speaking countries. In most non-English-speaking countries, it was difficult to analyse the programme curriculum in the native language because the programme and course description did not exit. In the data gathering phase, a customized web application was used for content analysis. The application has three main sections: a list of websites to evaluate, a visual representation of the uploaded website and a list of characteristics grouped by categories for quantifying data. About twenty years ago, publishing was not considered a separate scientific branch in Croatia. Publishing studies are therefore a new phenomenon to both scholars and publishers in Croatia. To create a new, ideal publishing course, can we simply copy global trends or is it better to create something of our own?

  5. Calculations of lightning-induced voltages in medium voltage distribution lines

    Energy Technology Data Exchange (ETDEWEB)

    Munhoz Rojas, Patricio E. [Instituto de Tecnologia para o Desenvolvimento (LACTEC/UFPR), Curitiba, PR (Brazil)], E-mail: patricio@lactec.org.br; Pinto, Cleverson Luiz da Silva [Companhia Paranaense de Energia (COPEL), Curitiba, PR (Brazil)], E-mail: cleverson@copel.com

    2007-07-01

    The objective of this paper is to show the results of a new computer program, written in Mat Lab environment, that is intended to calculate the lightning induced voltages in multi-conductor non-homogeneous lines, in order to be able to evaluate the impact of the usual protective measures implemented against lightning-induced disturbances. The main new features of this program are: a coupling model in terms of the scalar potentials referred to a remote ground was adopted; the coupling to the vertical conductors was considered in a manner similar to rest of the line; the describing equations were converted into a system of coupled ordinary differential equations, by a discretization only in space, which was subsequently solved using the powerful ODE solvers existing in Mat Lab. The validation of the new program has been performed by comparing its predicted results with other theoretical and computational results available in the literature and also with other experimental results published in the literature. It is shown that the agreement with other well established theoretical results is very good and, also, that the agreement between the newly calculated results and some published experimental results is better than previously obtained results. (author)

  6. Mixed media : feminist presses and publishing politics in twentieth-century Britain

    OpenAIRE

    Murray, S. E.

    1999-01-01

    The high cultural profile of contemporary feminist publishing in Britain has previously met with a curiously evasive response from those spheres of academic discourse in which it might be expected to figure: women's studies, while asserting the innate politicality of all communication, has tended to overlook the subject of publishing in favour of less materialist cultural modes; while publishing studies has conventionally overlooked the significance of gender as a differential ...

  7. Undergraduate paramedic students cannot do drug calculations

    Science.gov (United States)

    Eastwood, Kathryn; Boyle, Malcolm J; Williams, Brett

    2012-01-01

    BACKGROUND: Previous investigation of drug calculation skills of qualified paramedics has highlighted poor mathematical ability with no published studies having been undertaken on undergraduate paramedics. There are three major error classifications. Conceptual errors involve an inability to formulate an equation from information given, arithmetical errors involve an inability to operate a given equation, and finally computation errors are simple errors of addition, subtraction, division and multiplication. The objective of this study was to determine if undergraduate paramedics at a large Australia university could accurately perform common drug calculations and basic mathematical equations normally required in the workplace. METHODS: A cross-sectional study methodology using a paper-based questionnaire was administered to undergraduate paramedic students to collect demographical data, student attitudes regarding their drug calculation performance, and answers to a series of basic mathematical and drug calculation questions. Ethics approval was granted. RESULTS: The mean score of correct answers was 39.5% with one student scoring 100%, 3.3% of students (n=3) scoring greater than 90%, and 63% (n=58) scoring 50% or less, despite 62% (n=57) of the students stating they ‘did not have any drug calculations issues’. On average those who completed a minimum of year 12 Specialist Maths achieved scores over 50%. Conceptual errors made up 48.5%, arithmetical 31.1% and computational 17.4%. CONCLUSIONS: This study suggests undergraduate paramedics have deficiencies in performing accurate calculations, with conceptual errors indicating a fundamental lack of mathematical understanding. The results suggest an unacceptable level of mathematical competence to practice safely in the unpredictable prehospital environment. PMID:25215067

  8. Undergraduate paramedic students cannot do drug calculations.

    Science.gov (United States)

    Eastwood, Kathryn; Boyle, Malcolm J; Williams, Brett

    2012-01-01

    Previous investigation of drug calculation skills of qualified paramedics has highlighted poor mathematical ability with no published studies having been undertaken on undergraduate paramedics. There are three major error classifications. Conceptual errors involve an inability to formulate an equation from information given, arithmetical errors involve an inability to operate a given equation, and finally computation errors are simple errors of addition, subtraction, division and multiplication. The objective of this study was to determine if undergraduate paramedics at a large Australia university could accurately perform common drug calculations and basic mathematical equations normally required in the workplace. A cross-sectional study methodology using a paper-based questionnaire was administered to undergraduate paramedic students to collect demographical data, student attitudes regarding their drug calculation performance, and answers to a series of basic mathematical and drug calculation questions. Ethics approval was granted. The mean score of correct answers was 39.5% with one student scoring 100%, 3.3% of students (n=3) scoring greater than 90%, and 63% (n=58) scoring 50% or less, despite 62% (n=57) of the students stating they 'did not have any drug calculations issues'. On average those who completed a minimum of year 12 Specialist Maths achieved scores over 50%. Conceptual errors made up 48.5%, arithmetical 31.1% and computational 17.4%. This study suggests undergraduate paramedics have deficiencies in performing accurate calculations, with conceptual errors indicating a fundamental lack of mathematical understanding. The results suggest an unacceptable level of mathematical competence to practice safely in the unpredictable prehospital environment.

  9. An implicit flux-split algorithm to calculate hypersonic flowfields in chemical equilibrium

    Science.gov (United States)

    Palmer, Grant

    1987-01-01

    An implicit, finite-difference, shock-capturing algorithm that calculates inviscid, hypersonic flows in chemical equilibrium is presented. The flux vectors and flux Jacobians are differenced using a first-order, flux-split technique. The equilibrium composition of the gas is determined by minimizing the Gibbs free energy at every node point. The code is validated by comparing results over an axisymmetric hemisphere against previously published results. The algorithm is also applied to more practical configurations. The accuracy, stability, and versatility of the algorithm have been promising.

  10. Desktop Publishing.

    Science.gov (United States)

    Stanley, Milt

    1986-01-01

    Defines desktop publishing, describes microcomputer developments and software tools that make it possible, and discusses its use as an instructional tool to improve writing skills. Reasons why students' work should be published, examples of what to publish, and types of software and hardware to facilitate publishing are reviewed. (MBR)

  11. Structural Revision of Some Recently Published Iridoid Glucosides

    DEFF Research Database (Denmark)

    Jensen, Søren Rosendal; Calis, Ihsan; Gotfredsen, Charlotte Held

    2007-01-01

    ). Finally, two alleged iridoid galactosides from Buddleja crispa named buddlejosides A and B (12a and 12b) have been shown to be the corresponding glucosides; the former is identical to agnuside (13a) while the latter is 3,4-dihydroxybenzoylaucubin (13b), an iridoid glucoside not previously published...

  12. Technical note: Rapid calculation of genomic evaluations for new animals.

    Science.gov (United States)

    Wiggans, G R; VanRaden, P M; Cooper, T A

    2015-03-01

    A method was developed to calculate preliminary genomic evaluations daily or weekly before the release of official monthly evaluations by processing only newly genotyped animals using estimates of single nucleotide polymorphism effects from the previous official evaluation. To minimize computing time, reliabilities and genomic inbreeding are not calculated, and fixed weights are used to combine genomic and traditional information. Correlations of preliminary and September official monthly evaluations for animals with genotypes that became usable after the extraction of genotypes for August 2014 evaluations were >0.99 for most Holstein traits. Correlations were lower for breeds with smaller population size. Earlier access to genomic evaluations benefits producers by enabling earlier culling decisions and genotyping laboratories by making workloads more uniform across the month. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  13. Verification of absorbed dose calculation with XIO Radiotherapy Treatment Planning System

    International Nuclear Information System (INIS)

    Bokulic, T.; Budanec, M.; Frobe, A.; Gregov, M.; Kusic, Z.; Mlinaric, M.; Mrcela, I.

    2013-01-01

    Modern radiotherapy relies on computerized treatment planning systems (TPS) for absorbed dose calculation. Most TPS require a detailed model of a given machine and therapy beams. International Atomic Energy Agency (IAEA) recommends acceptance testing for the TPS (IAEA-TECDOC-1540). In this study we present customization of those tests for measurements with the purpose of verification of beam models intended for clinical use in our department. Elekta Synergy S linear accelerator installation and data acquisition for Elekta CMS XiO 4.62 TPS was finished in 2011. After the completion of beam modelling in TPS, tests were conducted in accordance with the IAEA protocol for TPS dose calculation verification. The deviations between the measured and calculated dose were recorded for 854 points and 11 groups of tests in a homogenous phantom. Most of the deviations were within tolerance. Similar to previously published results, results for irregular L shaped field and asymmetric wedged fields were out of tolerance for certain groups of points.(author)

  14. Music publishing

    OpenAIRE

    Simões, Alberto; Almeida, J. J.

    2003-01-01

    Current music publishing in the Internet is mainly concerned with sound publishing. We claim that music publishing is not only to make sound available but also to define relations between a set of music objects like music scores, guitar chords, lyrics and their meta-data. We want an easy way to publish music in the Internet, to make high quality paper booklets and even to create Audio CD's. In this document we present a workbench for music publishing based on open formats, using open-source t...

  15. Pioneers, publishers and the dissemination of archaeological knowledge: A study of publishing in British archaeology 1816-1851

    Directory of Open Access Journals (Sweden)

    Sarah Scott

    2013-08-01

    Full Text Available The first half of the nineteenth century was a formative period in the development of archaeology as a discipline and archaeological publishing played a key role in this. Libraries were an essential marker of social and intellectual status and there now exists a considerable body of scholarship on the most impressive publications of the day and on the factors influencing their presentation; for example, in relation to the publication of Mediterranean classical antiquities. The crucial role which publishers played in the selection and dissemination of scholarship has been addressed in recent studies of the history of the book, and there is a growing literature on the role of publishers in the dissemination of scientific knowledge, but there has to date been very limited evaluation of the role of publishers in the selection and dissemination of archaeological knowledge in Britain in this period. This study will investigate the extent to which the publication and dissemination of archaeological knowledge, and hence the discipline itself, was shaped by the intellectual and/or commercial concerns of publishers, with a view to providing a more nuanced understanding of the ways in which knowledge was filtered and the impact that this had. Key trends in archaeological publishing in the period 1816-51 will be identified, based on the London Catalogue of Books, and will show how and why this kind of study should be seen as an essential component of any research which considers the history of the discipline. Selected case studies will show the immense, and previously unacknowledged, importance of decisions made during the publication process on the development of archaeology in Britain, and directions for further study will be identified.

  16. [Bibliometric study of the original articles published in Revista Española de Salud Púiblica (1991-2000). Part III: reference analysis].

    Science.gov (United States)

    Villar Alvarez, Fernando; Estrada Lorenzo, José Manuel; Peréz Andrés, Christina; Rebollo Rodríguez, M José

    2007-01-01

    The advancement of knowledge is based on the results of previously conducted research studies, which are reflected in the reference sources listed in a scientific article. This study is aimed at studying the scientific information used in the Revista Española de Salud Pública based on the references cited in the original articles published during the 1991-2000 period. The data regarding the year and where published, document type, language and country in which published was taken from the reference sources listed in the 290 original articles published, the obsolescence, Price and isolation indexes being calculated, and the Bradford core distribution being established according to the source journals. The self-citing rate was also calculated. A total of 7465 references were cited in the Reference section of the 290 original articles. An average of 25.7 references were cited per article. The Price index was 40.7. The scientific articles showed an obsolescence index of 5, the books and book chapters having an index of 6. A total 50.6% of the citations were from studies published in Spanish. The isolation index of the references was 48.1. The first Bradford core is comprised of 10 journals, the first four of which are Spanish. The self-citing rate was 3.8%. The information consumption of the original articles published in the Revista Española de Salud Pública show parameters similar to those of other Spanish health sciences journals for those same years, and the parameters regarding which this Journal differs from other Spanish health sciences journals seem to be justified by those particular aspects unique to public health, which does not fall within the patterns inherent to the clinical disciplines.

  17. An Electronic Publishing Model for Academic Publishers.

    Science.gov (United States)

    Gold, Jon D.

    1994-01-01

    Describes an electronic publishing model based on Standard Generalized Markup Language (SGML) and considers its use by an academic publisher. Highlights include how SGML is used to produce an electronic book, hypertext, methods of delivery, intellectual property rights, and future possibilities. Sample documents are included. (two references) (LRW)

  18. Shielding requirements for constant-potential diagnostic x-ray beams determined by a Monte Carlo calculation

    International Nuclear Information System (INIS)

    Simpkin, D.J.

    1989-01-01

    A Monte Carlo calculation has been performed to determine the transmission of broad constant-potential x-ray beams through Pb, concrete, gypsum wallboard, steel and plate glass. The EGS4 code system was used with a simple broad-beam geometric model to generate exposure transmission curves for published 70, 100, 120 and 140-kVcp x-ray spectra. These curves are compared to measured three-phase generated x-ray transmission data in the literature and found to be reasonable. For calculation ease the data are fit to an equation previously shown to describe such curves quite well. These calculated transmission data are then used to create three-phase shielding tables for Pb and concrete, as well as other materials not available in Report No. 49 of the NCRP

  19. Shielding requirements for constant-potential diagnostic x-ray beams determined by a Monte Carlo calculation.

    Science.gov (United States)

    Simpkin, D J

    1989-02-01

    A Monte Carlo calculation has been performed to determine the transmission of broad constant-potential x-ray beams through Pb, concrete, gypsum wallboard, steel and plate glass. The EGS4 code system was used with a simple broad-beam geometric model to generate exposure transmission curves for published 70, 100, 120 and 140-kVcp x-ray spectra. These curves are compared to measured three-phase generated x-ray transmission data in the literature and found to be reasonable. For calculation ease the data are fit to an equation previously shown to describe such curves quite well. These calculated transmission data are then used to create three-phase shielding tables for Pb and concrete, as well as other materials not available in Report No. 49 of the NCRP.

  20. Calculation of Hazard Category 2/3 Threshold Quantities Using Contemporary Dosimetric Data

    Energy Technology Data Exchange (ETDEWEB)

    Walker, William C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-11-01

    The purpose of this report is to describe the methodology and selection of input data utilized to calculate updated Hazard Category 2 and Hazard Category 3 Threshold Quantities (TQs) using contemporary dosimetric information. The calculation of the updated TQs will be considered for use in the revision to the Department of Energy (DOE) Technical Standard (STD-) 1027-92 Change Notice (CN)-1, “Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports.” The updated TQs documented in this report complement an effort previously undertaken by the National Nuclear Security Administration (NNSA), which in 2014 issued revised Supplemental Guidance documenting the calculation of updated TQs for approximately 100 radionuclides listed in DOE-STD-1027-92, CN-1. The calculations documented in this report complement the NNSA effort by expanding the set of radionuclides to more than 1,250 radionuclides with a published TQ. The development of this report was sponsored by the Department of Energy’s Office of Nuclear Safety (AU-30) within the Associate Under Secretary for Environment, Health, Safety, and Security organization.

  1. Investigation of previously derived Hyades, Coma, and M67 reddenings

    International Nuclear Information System (INIS)

    Taylor, B.J.

    1980-01-01

    New Hyades polarimetry and field star photometry have been obtained to check the Hyades reddening, which was found to be nonzero in a previous paper. The new Hyades polarimetry implies essentially zero reddening; this is also true of polarimetry published by Behr (which was incorrectly interpreted in the previous paper). Four photometric techniques which are presumed to be insensitive to blanketing are used to compare the Hyades to nearby field stars; these four techniques also yield essentially zero reddening. When all of these results are combined with others which the author has previously published and a simultaneous solution for the Hyades, Coma, and M67 reddenings is made, the results are E (B-V) =3 +- 2 (sigma) mmag, -1 +- 3 (sigma) mmag, and 46 +- 6 (sigma) mmag, respectively. No support for a nonzero Hyades reddening is offered by the new results. When the newly obtained reddenings for the Hyades, Coma, and M67 are compared with results from techniques given by Crawford and by users of the David Dunlap Observatory photometric system, no differences between the new and other reddenings are found which are larger than about 2 sigma. The author had previously found that the M67 main-sequence stars have about the same blanketing as that of Coma and less blanketing than the Hyades; this conclusion is essentially unchanged by the revised reddenings

  2. Poet's Market, 1997: Where & How To Publish Your Poetry.

    Science.gov (United States)

    Martin, Christine, Ed.; Bentley, Chantelle, Ed.

    This directory provides 1700 listings and evaluations of poetry publishers--300 more than in the previous edition--along with complete submission and contact information. Listings include both domestic and international markets, from mass circulation and literary magazines to small presses and university quarterlies, and contain complete profiles…

  3. A GPU-based finite-size pencil beam algorithm with 3D-density correction for radiotherapy dose calculation

    International Nuclear Information System (INIS)

    Gu Xuejun; Jia Xun; Jiang, Steve B; Jelen, Urszula; Li Jinsheng

    2011-01-01

    Targeting at the development of an accurate and efficient dose calculation engine for online adaptive radiotherapy, we have implemented a finite-size pencil beam (FSPB) algorithm with a 3D-density correction method on graphics processing unit (GPU). This new GPU-based dose engine is built on our previously published ultrafast FSPB computational framework (Gu et al 2009 Phys. Med. Biol. 54 6287-97). Dosimetric evaluations against Monte Carlo dose calculations are conducted on ten IMRT treatment plans (five head-and-neck cases and five lung cases). For all cases, there is improvement with the 3D-density correction over the conventional FSPB algorithm and for most cases the improvement is significant. Regarding the efficiency, because of the appropriate arrangement of memory access and the usage of GPU intrinsic functions, the dose calculation for an IMRT plan can be accomplished well within 1 s (except for one case) with this new GPU-based FSPB algorithm. Compared to the previous GPU-based FSPB algorithm without 3D-density correction, this new algorithm, though slightly sacrificing the computational efficiency (∼5-15% lower), has significantly improved the dose calculation accuracy, making it more suitable for online IMRT replanning.

  4. Development of hybrid core calculation system using 2-D full-core heterogeneous transport calculation and 3-D advanced nodal calculation

    International Nuclear Information System (INIS)

    Sugimura, Naoki; Mori, Masaaki; Hijiya, Masayuki; Ushio, Tadashi; Arakawa, Yasushi

    2004-01-01

    This paper presents the Hybrid Core Calculation System which is a very rigorous but a practical calculation system applicable to best estimate core design calculations taking advantage of the recent remarkable progress of computers. The basic idea of this system is to generate the correction factors for assembly homogenized cross sections, discontinuity factors, etc. by comparing the CASMO-4 and SIMULATE-3 2-D core calculation results under the consistent calculation condition and then apply them for SIMULATE-3 3-D calculation. The CASMO-4 2-D heterogeneous core calculation is performed for each depletion step with the core conditions previously determined by ordinary SIMULATE-3 core calculation to avoid time consuming iterative calculations searching for the critical boron concentrations while treating the thermal hydraulic feedback. The final SIMULATE-3 3-D calculation using the correction factors is performed with iterative calculations searching for the critical boron concentrations while treating the thermal hydraulic feedback. (author)

  5. Ab initio calculation of the shear viscosity of neon in the liquid and hypercritical state over a wide pressure and temperature range

    Science.gov (United States)

    Eggenberger, Rolf; Gerber, Stefan; Huber, Hanspeter; Searles, Debra; Welker, Marc

    1992-08-01

    The shear viscosity is calculated ab initio for the liquid and hypercritical state, i.e. a previously published potential for Ne 2, obtained from ab initio calculations including electron correlation, is used in classical equilibrium molecular dynamics simulations to obtain the shear viscosity from a Green-Kubo integral. The quality of the results is quite uniform over a large pressure range up to 1000 MPa and a wide temperature range from 26 to 600 K. In most cases the calculated shear viscosity deviates by less than 10% from the experimental value, in general the error being only a few percent.

  6. Integral linear momentum balance in combining flows for calculating the pressure drop coefficients

    International Nuclear Information System (INIS)

    Bollmann, A.

    1983-01-01

    Equations for calculating the loss coefficient in combining flows in tee functions are obtained by an integral linear momentum balance. It is a practice, when solving this type of problem, to neglect the pressure difference in the upstream location as well as the wall-fluid interaction in the lateral branch of the junction. In this work it is demonstrated the influence of the above parameters on the loss coefficient based on experimental values and by apropriate algebraic manipulation of the loss coefficient values published by previous investigators. (Author) [pt

  7. Augmenting Data with Published Results in Bayesian Linear Regression

    Science.gov (United States)

    de Leeuw, Christiaan; Klugkist, Irene

    2012-01-01

    In most research, linear regression analyses are performed without taking into account published results (i.e., reported summary statistics) of similar previous studies. Although the prior density in Bayesian linear regression could accommodate such prior knowledge, formal models for doing so are absent from the literature. The goal of this…

  8. Publishing and the academic world passion, purpose and possible futures

    CERN Document Server

    Mertkan, Sefika

    2016-01-01

    Within the Academy, itself a changing and increasingly entrepreneurial entity, publishing is no longer an option; it is the universal currency that secures a position, tenure and promotion; it is key to academic life. Providing a panoramic picture of the changing publishing climate, "Academic Life and the Publishing Landscape "will empower scholars by enabling them to navigate this changing terrain more successfully. This book provides guidance from a range of contributors who use their own wide expertise in writing and publication to document the challenges faced by scholars at different career stages and in different locations. It covers a wide range of debates on publishing, spilt into the following three sections: Mapping the Publication Landscape, Writing for Publication Learning from Successful Voices, Further Challenges and Possibilities. With topics ranging from the process of preparing manuscripts for publication, including chapters on calculating journal rankings and understanding t...

  9. Monte Carlo 20 and 45 MeV Bremsstrahlung and dose-reduction calculations

    Energy Technology Data Exchange (ETDEWEB)

    Goosman, D.R.

    1984-08-14

    The SANDYL electron-photon coupled Monte Carlo code has been compared with previously published experimental bremsstrahlung data at 20.9 MeV electron energy. The code was then used to calculate forward-directed spectra, angular distributions and dose-reduction factors for three practical configurations. These are: 20 MeV electrons incident on 1 mm of W + 59 mm of Be, 45 MeV electrons of 1 mm of W and 45 MeV electrons on 1 mm of W + 147 mm of Be. The application of these results to flash radiography is discussed. 7 references, 12 figures, 1 table.

  10. Monte Carlo 20 and 45 MeV Bremsstrahlung and dose-reduction calculations

    International Nuclear Information System (INIS)

    Goosman, D.R.

    1984-01-01

    The SANDYL electron-photon coupled Monte Carlo code has been compared with previously published experimental bremsstrahlung data at 20.9 MeV electron energy. The code was then used to calculate forward-directed spectra, angular distributions and dose-reduction factors for three practical configurations. These are: 20 MeV electrons incident on 1 mm of W + 59 mm of Be, 45 MeV electrons of 1 mm of W and 45 MeV electrons on 1 mm of W + 147 mm of Be. The application of these results to flash radiography is discussed. 7 references, 12 figures, 1 table

  11. THE QUALITY CRITERIA AND SELF-PUBLISHING IN SCIENTIFIC PUBLISHING

    Directory of Open Access Journals (Sweden)

    Almudena Mangas-Vega

    2015-11-01

    Full Text Available Self-publishing is a growing phenomenon in recent years. It is a process that goes beyond a simple change of leader in the publication, since it involves also a change of role of agents that were consolidated over time. A self-published work does not have to mean lack of quality, so it is important to define parameters and indicators that help its evaluation and identify who has the responsibility of those criteria. The article shows these aspects from the possibilities for cross-platform publishing and concludes with an analysis of the aspects that can be considered in assessing the quality of self-publishing.

  12. Practical astronomy with your calculator

    CERN Document Server

    Duffett-Smith, Peter

    1989-01-01

    Practical Astronomy with your Calculator, first published in 1979, has enjoyed immense success. The author's clear and easy to follow routines enable you to solve a variety of practical and recreational problems in astronomy using a scientific calculator. Mathematical complexity is kept firmly in the background, leaving just the elements necessary for swiftly making calculations. The major topics are: time, coordinate systems, the Sun, the planetary system, binary stars, the Moon, and eclipses. In the third edition there are entirely new sections on generalised coordinate transformations, nutr

  13. Embracing Electronic Publishing.

    Science.gov (United States)

    Wills, Gordon

    1996-01-01

    Electronic publishing is the grandest revolution in the capture and dissemination of academic and professional knowledge since Caxton developed the printing press. This article examines electronic publishing, describes different electronic publishing scenarios (authors' cooperative, consolidator/retailer/agent oligopsony, publisher oligopoly), and…

  14. A new calculation formula of the nuclear cross-section of therapeutic protons

    Directory of Open Access Journals (Sweden)

    Waldemar Ulmer

    2014-03-01

    Full Text Available Purpose: We have previously developed for nuclear cross-sections of therapeutic protons a calculation model, which is founded on the collective model as well as a quantum mechanical many particle problem to derive the S matrix and transition probabilities. In this communication, we show that the resonances can be derived by shifted Gaussian functions, whereas the unspecific nuclear interaction compounds can be represented by an error function, which also provides the asymptotic behavior. Method: The energy shifts can be interpreted in terms of necessary domains of energy to excite typical nuclear processes. Thus the necessary formulas referring to previous calculations of nuclear cross-sections will be represented. The mass number AN determines the strong interaction range, i.e. RStrong = 1.2·10-13·AN1/3cm. The threshold energy ETh of the energy barrier is determined by the condition Estrong = ECoulomb. Results and Conclusion: A linear combination of Gaussians, which contain additional energy shifts, and an error function incorporate a possible representation of Fermi-Dirac statistics, which is applied here to nuclear excitations and reaction with release of secondary particles. The new calculation formula provides a better understanding of different types of resonances occurring in nuclear interactions with protons. The present study is mainly a continuation of published papers.1-3--------------------------------Cite this article as: Ulmer W. A new calculation formula of the nuclear cross-section of therapeutic protons. Int J Cancer Ther Oncol 2014; 2(2:020211. DOI: 10.14319/ijcto.0202.11

  15. Analysis of thirteen predatory publishers: a trap for eager-to-publish researchers.

    Science.gov (United States)

    Bolshete, Pravin

    2018-01-01

    To demonstrate a strategy employed by predatory publishers to trap eager-to-publish authors or researchers into submitting their work. This was a case study of 13 potential, possible, or probable predatory scholarly open-access publishers with similar characteristics. Eleven publishers were included from Beall's list and two additional publishers were identified from a Google web search. Each publisher's site was visited and its content analyzed. Publishers publishing biomedical journals were further explored and additional data was collected regarding their volumes, details of publications and editorial-board members. Overall, the look and feel of all 13 publishers was similar including names of publishers, website addresses, homepage content, homepage images, list of journals and subject areas, as if they were copied and pasted. There were discrepancies in article-processing charges within the publishers. None of the publishers identified names in their contact details and primarily included only email addresses. Author instructions were similar across all 13 publishers. Most publishers listed journals of varied subject areas including biomedical journals (12 publishers) covering different geographic locations. Most biomedical journals published none or very few articles. The highest number of articles published by any single biomedical journal was 28. Several editorial-board members were listed across more than one journals, with one member listed 81 times in different 69 journals (i.e. twice in 12 journals). There was a strong reason to believe that predatory publishers may have several publication houses with different names under a single roof to trap authors from different geographic locations.

  16. Numerical groundwater flow calculations at the Finnsjoen site

    International Nuclear Information System (INIS)

    Lindbom, B.; Boghammar, A.; Lindberg, H.; Bjelkaas, J.

    1991-02-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) has initiated a research project called SKB 91, which is related to performance assessment of repositories for high level waste from nuclear power plants. Specifically the Finnsjoen site is of concern. As part of this research project, the report describes groundwater flow calculations at the Finnsjoen site, located in northern Uppland, approximately 150 km north of Stockholm. The calculations have been performed with the finite element method applying the porous media approach. The project comprises three steps, the first of which is concerned with the presence of salt below a hydraulically significant structure. This step was modelled in two dimensions in a semi-generic fashion, while the two following steps comprised three-dimensional modelling of the site at a semi-regional and a local scale. The semi-regional model covered approximately 43 square km while the area of the local model was roughly 6.6 square km. The semi-regional model included well expressed regional fracture zones that were explicitly modelled in deterministic manner. The modelling was performed with the finite element code NAMMU, used together with the program-package HYPAC. The latter was used for pre- and postprocessing purposes. The modelling was performed with 8-noded brick elements for the three-dimensional calculations, and the two-dimensional model involved the use of 8-noded rectangular elements. The present report is a revised version of a report previously published as a working report. The difference between the present report and the previous one, is that the present report describes the conclusions more site-specifically, the presentation of a number of the cases tackled has been pruned down, some editorial effort has been put into having the volume of the report reduced, and finally the summary has been edited and cut down. (authors)

  17. Reproducibility discrepancies following reanalysis of raw data for a previously published study on diisononyl phthalate (DINP in rats

    Directory of Open Access Journals (Sweden)

    Min Chen

    2017-08-01

    Full Text Available A 2011 publication by Boberg et al. entitled “Reproductive and behavioral effects of diisononyl phthalate (DINP in perinatally exposed rats” [1] reported statistically significant changes in sperm parameters, testicular histopathology, anogenital distance and retained nipples in developing males. Using the statistical methods as reported by Boberg et al. (2011 [1], we reanalyzed the publically available raw data ([dataset] US EPA (United States Environmental Protection Agency, 2016 [2]. The output of our reanalysis and the discordances with the data as published in Boberg et al. (2011 [1] are highlighted herein. Further discussion of the basis for the replication discordances and the insufficiency of the Boberg et al. (2011 [1] response to address them can be found in a companion letter of correspondence (doi: 10.1016/j.reprotox.2017.03.013.; (Morfeld et al., 2011 [3].

  18. Calculation of 235U(n,n') cross sections for ENDF/B-VI

    International Nuclear Information System (INIS)

    Young, P.G.; Arthur, E.D.

    1988-01-01

    Cross sections for neutron-induced reactions on 235 U between 0.01 and 20 MeV have been calculated in a preliminary analysis for the ENDF/B-VI evaluation with particular emphasis on neutron inelastic scattering. A deformed optical model potential that fits total, elastic, inelastic, and low-energy average resonance data is used to calculate direct (n,n') cross sections and transmission coefficients for a Hauser-Feshbach statistical theory analysis using a multiple fission barrier representation. Direct cross sections for higher-lying vibrational states are provided from DWBA calculations, normalized using B(E/ital l/) values determined from (d,d') and Coulomb excitation data. Initial fission barrier parameters and transition state density enhancements appropriate to the compound systems involved were obtained from previous analyses, especially fits to charged-particle fission probability data. Further modifications to fit 235 U(n,f) data were small, and the final fission parameters are generally consistent with published values. The results from this preliminary analysis are compared with the ENDF/B-V evaluation as well as with experimental data. 26 refs., 5 figs., 3 tabs

  19. Plagiarism in scientific publishing.

    Science.gov (United States)

    Masic, Izet

    2012-12-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader's own scientific contribution. There is no general regulation of control of

  20. The Calculator of Anti-Alzheimer's Diet. Macronutrients.

    Science.gov (United States)

    Studnicki, Marcin; Woźniak, Grażyna; Stępkowski, Dariusz

    2016-01-01

    The opinions about optimal proportions of macronutrients in a healthy diet have changed significantly over the last century. At the same time nutritional sciences failed to provide strong evidence backing up any of the variety of views on macronutrient proportions. Herein we present an idea how these proportions can be calculated to find an optimal balance of macronutrients with respect to prevention of Alzheimer's Disease (AD) and dementia. These calculations are based on our published observation that per capita personal income (PCPI) in the USA correlates with age-adjusted death rates for AD (AADR). We have previously reported that PCPI through the period 1925-2005 correlated with AADR in 2005 in a remarkable, statistically significant oscillatory manner, as shown by changes in the correlation coefficient R (Roriginal). A question thus arises what caused the oscillatory behavior of Roriginal? What historical events in the life of 2005 AD victims had shaped their future with AD? Looking for the answers we found that, considering changes in the per capita availability of macronutrients in the USA in the period 1929-2005, we can mathematically explain the variability of Roriginal for each quarter of a human life. On the basis of multiple regression of Roriginal with regard to the availability of three macronutrients: carbohydrates, total fat, and protein, with or without alcohol, we propose seven equations (referred to as "the calculator" throughout the text) which allow calculating optimal changes in the proportions of macronutrients to reduce the risk of AD for each age group: youth, early middle age, late middle age and late age. The results obtained with the use of "the calculator" are grouped in a table (Table 4) of macronutrient proportions optimal for reducing the risk of AD in each age group through minimizing Rpredicted-i.e., minimizing the strength of correlation between PCPI and future AADR.

  1. Predictive effects of previous episodes on the risk of recurrence in depressive and bipolar disorders

    DEFF Research Database (Denmark)

    Kessing, Lars Vedel; Andersen, Per Kragh

    2005-01-01

    Findings from several studies have suggested that the risk of recurrence increases with the number of previous episodes in depressive and bipolar disorders. However, a comprehensive and critical review of the literature published during the past century shows that in several previous studies...

  2. EPA Science Matters Newsletter: Stormwater Calculator Helps Communities Take Action to Reduce Runoff (Published April 2014)

    Science.gov (United States)

    Learn about the Stormwater Calculator that provides estimates for stormwater runoff from a specific site. Users can input any location within the U.S. and select different scenarios to see how it affects runoff volumes.

  3. The Power of Low Back Pain Trials: A Systematic Review of Power, Sample Size, and Reporting of Sample Size Calculations Over Time, in Trials Published Between 1980 and 2012.

    Science.gov (United States)

    Froud, Robert; Rajendran, Dévan; Patel, Shilpa; Bright, Philip; Bjørkli, Tom; Eldridge, Sandra; Buchbinder, Rachelle; Underwood, Martin

    2017-06-01

    A systematic review of nonspecific low back pain trials published between 1980 and 2012. To explore what proportion of trials have been powered to detect different bands of effect size; whether there is evidence that sample size in low back pain trials has been increasing; what proportion of trial reports include a sample size calculation; and whether likelihood of reporting sample size calculations has increased. Clinical trials should have a sample size sufficient to detect a minimally important difference for a given power and type I error rate. An underpowered trial is one within which probability of type II error is too high. Meta-analyses do not mitigate underpowered trials. Reviewers independently abstracted data on sample size at point of analysis, whether a sample size calculation was reported, and year of publication. Descriptive analyses were used to explore ability to detect effect sizes, and regression analyses to explore the relationship between sample size, or reporting sample size calculations, and time. We included 383 trials. One-third were powered to detect a standardized mean difference of less than 0.5, and 5% were powered to detect less than 0.3. The average sample size was 153 people, which increased only slightly (∼4 people/yr) from 1980 to 2000, and declined slightly (∼4.5 people/yr) from 2005 to 2011 (P pain trials and the reporting of sample size calculations may need to be increased. It may be justifiable to power a trial to detect only large effects in the case of novel interventions. 3.

  4. Calculation of resonance integral for fuel cluster

    International Nuclear Information System (INIS)

    Remsak, S.

    1969-01-01

    The procedure for calculating the shielding correction, formulated in the previous paper [6], was broadened and applied for a cluster of cylindrical rods. The sam analytical method as in the previous paper was applied. A combination of Gauss method with the method of Almgren and Porn used for solving the same type of integral was used to calculate the geometry functions. CLUSTER code was written for ZUSE-Z-23 computer to calculate the shielding corrections for pairs of fuel rods in the cluster. Computing time for one pair of fuel rods depends on the number of closely placed rod, and for two closely placed rods it is about 3 hours. Calculations were done for clusters containing 7 and 19 UO 2 rods. results show that calculated values of resonance integrals are somewhat higher than the values obtained by Helstrand empirical formula. Taking into account the results for two rods from the previous paper it can be noted that the calculated and empirical values for clusters with 2 and 7 rods are in agreement since the deviations do not exceed the limits of experimental error (±2%). In case of larger cluster with 19 rods deviations are higher than the experimental error. Most probably the calculated values exceed the experimental ones result from the fact that in this paper the shielding correction is calculated only in the region up to 1 keV [sr

  5. Publisher Correction: Measuring progress from nationally determined contributions to mid-century strategies

    Science.gov (United States)

    Iyer, Gokul; Ledna, Catherine; Clarke, Leon; Edmonds, James; McJeon, Haewon; Kyle, Page; Williams, James H.

    2018-03-01

    In the version of this Article previously published, technical problems led to the wrong summary appearing on the homepage, and an incorrect Supplementary Information file being uploaded. Both errors have now been corrected.

  6. False gold: Safely navigating open access publishing to avoid predatory publishers and journals.

    Science.gov (United States)

    McCann, Terence V; Polacsek, Meg

    2018-04-01

    The aim of this study was to review and discuss predatory open access publishing in the context of nursing and midwifery and develop a set of guidelines that serve as a framework to help clinicians, educators and researchers avoid predatory publishers. Open access publishing is increasingly common across all academic disciplines. However, this publishing model is vulnerable to exploitation by predatory publishers, posing a threat to nursing and midwifery scholarship and practice. Guidelines are needed to help researchers recognize predatory journals and publishers and understand the negative consequences of publishing in them. Discussion paper. A literature search of BioMed Central, CINAHL, MEDLINE with Full Text and PubMed for terms related to predatory publishing, published in the period 2007-2017. Lack of awareness of the risks and pressure to publish in international journals, may result in nursing and midwifery researchers publishing their work in dubious open access journals. Caution should be taken prior to writing and submitting a paper, to avoid predatory publishers. The advantage of open access publishing is that it provides readers with access to peer-reviewed research as soon as it is published online. However, predatory publishers use deceptive methods to exploit open access publishing for their own profit. Clear guidelines are needed to help researchers navigate safely open access publishing. A deeper understanding of the risks of predatory publishing is needed. Clear guidelines should be followed by nursing and midwifery researchers seeking to publish their work in open access journals. © 2017 John Wiley & Sons Ltd.

  7. A Python tool to set up relative free energy calculations in GROMACS.

    Science.gov (United States)

    Klimovich, Pavel V; Mobley, David L

    2015-11-01

    Free energy calculations based on molecular dynamics (MD) simulations have seen a tremendous growth in the last decade. However, it is still difficult and tedious to set them up in an automated manner, as the majority of the present-day MD simulation packages lack that functionality. Relative free energy calculations are a particular challenge for several reasons, including the problem of finding a common substructure and mapping the transformation to be applied. Here we present a tool, alchemical-setup.py, that automatically generates all the input files needed to perform relative solvation and binding free energy calculations with the MD package GROMACS. When combined with Lead Optimization Mapper (LOMAP; Liu et al. in J Comput Aided Mol Des 27(9):755-770, 2013), recently developed in our group, alchemical-setup.py allows fully automated setup of relative free energy calculations in GROMACS. Taking a graph of the planned calculations and a mapping, both computed by LOMAP, our tool generates the topology and coordinate files needed to perform relative free energy calculations for a given set of molecules, and provides a set of simulation input parameters. The tool was validated by performing relative hydration free energy calculations for a handful of molecules from the SAMPL4 challenge (Mobley et al. in J Comput Aided Mol Des 28(4):135-150, 2014). Good agreement with previously published results and the straightforward way in which free energy calculations can be conducted make alchemical-setup.py a promising tool for automated setup of relative solvation and binding free energy calculations.

  8. MO-FG-CAMPUS-IeP2-03: Validation of an SSDE-To-Organ-Dose Calculation Methodology Developed for Pediatric CT in An Adult Population

    Energy Technology Data Exchange (ETDEWEB)

    Mead, H [Christian Brothers University, Memphis, TN (United States); St. Jude Children’s Research Hospital, Memphis, TN (United States); Brady, S; Kaufman, R [St. Jude Children’s Research Hospital, Memphis, TN (United States)

    2016-06-15

    Purpose: To discover if a previously published methodology for estimating patient-specific organ dose in a pediatric population (5–55kg) is translatable to the adult sized patient population (> 55 kg). Methods: An adult male anthropomorphic phantom was scanned with metal oxide semiconductor field effect transistor (MOSFET) dosimeters placed at 23 organ locations in the chest and abdominopelvic regions to determine absolute organ dose. Organ-dose-to-SSDE correlation factors were developed by dividing individual phantom organ doses by SSDE of the phantom; where SSDE was calculated at the center of the scan volume of the chest and abdomen/pelvis separately. Organ dose correlation factors developed in phantom were multiplied by 28 chest and 22 abdominopelvic patient SSDE values to estimate organ dose. The median patient weight from the CT examinations was 68.9 kg (range 57–87 kg) and median age was 17 years (range 13–28 years). Calculated organ dose estimates were compared to published Monte Carlo simulated patient and phantom results. Results: Organ-dose-to-SSDE correlation was determined for a total of 23 organs in the chest and abdominopelvic regions. For organs fully covered by the scan volume, correlation in the chest (median 1.3; range 1.1–1.5) and abdominopelvic (median 0.9; range 0.7–1.0) was 1.0 ± 10%. For organs that extended beyond the scan volume (i.e. skin bone marrow and bone surface) correlation was determined to be a median of 0.3 (range 0.1–0.4). Calculated patient organ dose using patient SSDE agreed to better than 6% (chest) and 15% (abdominopelvic) to published values. Conclusion: This study demonstrated that our previous published methodology for calculating organ dose using patient-specific SSDE for the chest and abdominopelvic regions is translatable to adult sized patients for organs fully covered by the scan volume.

  9. NASAwide electronic publishing system: Electronic printing and duplicating, stage-2 evaluation report (GSFC)

    Science.gov (United States)

    Tuey, Richard C.; Lane, Robert; Hart, Susan V.

    1995-01-01

    The NASA Scientific and Technical Information Office was assigned the responsibility to continue with the expansion of the NASAwide networked electronic duplicating effort by including the Goddard Space Flight Center (GSFC) as an additional node to the existing configuration of networked electronic duplicating systems within NASA. The subject of this report is the evaluation of a networked electronic duplicating system which meets the duplicating requirements and expands electronic publishing capabilities without increasing current operating costs. This report continues the evaluation reported in 'NASA Electronic Publishing System - Electronic Printing and Duplicating Evaluation Report' (NASA TM-106242) and 'NASA Electronic Publishing System - Stage 1 Evaluation Report' (NASA TM-106510). This report differs from the previous reports through the inclusion of an external networked desktop editing, archival, and publishing functionality which did not exist with the previous networked electronic duplicating system. Additionally, a two-phase approach to the evaluation was undertaken; the first was a paper study justifying a 90-day, on-site evaluation, and the second phase was to validate, during the 90-day evaluation, the cost benefits and productivity increases that could be achieved in an operational mode. A benchmark of the functionality of the networked electronic publishing system and external networked desktop editing, archival, and publishing system was performed under a simulated daily production environment. This report can be used to guide others in determining the most cost effective duplicating/publishing alternative through the use of cost/benefit analysis and return on investment techniques. A treatise on the use of these techniques can be found by referring to 'NASA Electronic Publishing System -Cost/Benefit Methodology' (NASA TM-106662).

  10. Developments in Publishing: The Potential of Digital Publishing

    OpenAIRE

    X. Tian

    2007-01-01

    This research aims to identify issues associated with the impact of digital technology on the publishing industry with a specific focus on aspects of the sustainability of existing business models in Australia. Based on the case studies, interviews and Australian-wide online surveys, the research presents a review of the traditional business models in book publishing for investigating their effectiveness in a digital environment. It speculates on how and what should be considered for construc...

  11. EDITORIAL: Roberts Prize for the best paper published in 2009 Roberts Prize for the best paper published in 2009

    Science.gov (United States)

    Webb, Steve; Harris, Simon

    2010-07-01

    The publishers of Physics in Medicine and Biology (PMB), IOP Publishing, in association with the journal owners, the Institute of Physics and Engineering in Medicine (IPEM), jointly award an annual prize for the best paper published in PMB during the previous year. The procedure for deciding the winner has been made as thorough as possible, to try to ensure that an outstanding paper wins the prize. We started off with a shortlist of the 10 research papers published in 2009 which were rated the best based on the referees' quality assessments. Following the submission of a short 'case for winning' document by each of the shortlisted authors, an IPEM college of jurors of the status of FIPEM assessed and rated these 10 papers in order to choose a winner, which was then endorsed by the Editorial Board. We have a clear, and very worthy, winner this year. We have much pleasure in advising readers that the 2009 Roberts Prize is awarded to E Z Zhang et al from University College London for their paper on photoacoustic tomography. In vivo high resolution 3D photoacoustic imaging of superficial vascular anatomy E Z Zhang, J G Laufer, R B Pedley and P C Beard 2009 Phys. Med. Biol. 54 1035-46 Our congratulations go to these authors. Of course all of the shortlisted papers were of great merit, and the full top-10 is listed below (in alphabetical order). Steve Webb Editor-in-Chief Simon Harris Publisher References Cheng Y-C N , Neelavalli J and Haacke E M 2009 Limitations of calculating field distributions and magnetic susceptibilities in MRI using a Fourier based method Phys. Med. Biol. 54 1169-89 Cho S, Ahn S, Li Q and Leahy R M 2009 Exact and approximate Fourier rebinning of PET data from time-of-flight to non time-of-flight 2009 Phys. Med. Biol. 54 467-84 Davidson S R H, Weersink R A, Haider M A, Gertner M R, Bogaards A, Giewercer D, Scherz A, Sherar M D, Elhilali M, Chin J L, Trachtenberg J and Wilson B C 2009 Treatment planning and dose analysis for interstitial

  12. PLAGIARISM IN SCIENTIFIC PUBLISHING

    Science.gov (United States)

    Masic, Izet

    2012-01-01

    Scientific publishing is the ultimate product of scientist work. Number of publications and their quoting are measures of scientist success while unpublished researches are invisible to the scientific community, and as such nonexistent. Researchers in their work rely on their predecessors, while the extent of use of one scientist work, as a source for the work of other authors is the verification of its contributions to the growth of human knowledge. If the author has published an article in a scientific journal it cannot publish the article in any other journal h with a few minor adjustments or without quoting parts of the first article, which are used in another article. Copyright infringement occurs when the author of a new article with or without the mentioning the author used substantial portions of previously published articles, including tables and figures. Scientific institutions and universities should,in accordance with the principles of Good Scientific Practice (GSP) and Good Laboratory Practices (GLP) have a center for monitoring,security, promotion and development of quality research. Establish rules and compliance to rules of good scientific practice are the obligations of each research institutions,universities and every individual-researchers,regardless of which area of science is investigated. In this way, internal quality control ensures that a research institution such as a university, assume responsibility for creating an environment that promotes standards of excellence, intellectual honesty and legality. Although the truth should be the aim of scientific research, it is not guiding fact for all scientists. The best way to reach the truth in its study and to avoid the methodological and ethical mistakes is to consistently apply scientific methods and ethical standards in research. Although variously defined plagiarism is basically intended to deceive the reader’s own scientific contribution. There is no general regulation of control of

  13. On the Calculation of the Fe K-alpha Line Emissivity of Black Hole Accretion Disks

    Energy Technology Data Exchange (ETDEWEB)

    Krawczynski, H.; Beheshtipour, B., E-mail: krawcz@wustl.edu [Physics Department and McDonnell Center for the Space Sciences, Washington University in St. Louis, 1 Brookings Drive, CB 1105, St. Louis, MO 63130 (United States)

    2017-11-01

    Observations of the fluorescent Fe K α emission line from the inner accretion flows of stellar mass black holes in X-ray binaries and supermassive black holes in active galactic nuclei have become an important tool to study the magnitude and inclination of the black hole spin, and the structure of the accretion flow close to the event horizon of the black hole. Modeling spectral, timing, and soon also X-ray polarimetric observations of the Fe K α emission requires the calculation of the specific intensity in the rest frame of the emitting plasma. We revisit the derivation of the equation used for calculating the illumination of the accretion disk by the corona. We present an alternative derivation leading to a simpler equation, and discuss the relation to previously published results.

  14. A Study on New Pochonka Published in A.D. 1792

    Science.gov (United States)

    Ahn, Sang-Hyeon

    2009-12-01

    New Pochonka published in the eighteenth century of the Choson dynasty was composed of star-charts based on the new observations made by Jesuits in China and songs corrected a little bit from previous version of Pochonka. The asterisms in the previous Pochonka are listed in the same order to that in the Song dynasty's literature; while the asterisms in the new Pochonka are listed in accordance with Pu-tien-ko published in China after the Ming dynasty. The Chinese-style twelve-equatorial-section system is adopted in the new Pochonka, while in its song is adopted the zodiac system, which can be seen in the star-charts of previous version of Pochonka. The asterisms belonging to three or four neighboring lunar-mansions are drawn in one chart. Each chart covers asterisms not belonging to a certain range of right ascension, but to a certain lunar mansion. We estimate the forming era of the new Pochonka from the following facts; that the Ling-Tai-I-Hsiang-Chih was used to make charts and footnotes whose archetype can be found in the Chinese literature around A.D. 1700, that these Chinese books were imported into Choson in A.D. 1709, that the naming taboo to the emperor Khang-Hsi was used, that the order of Shen-Hsiu (參宿) was transposed with Tshui-Hsiu (자宿), and that the new Pochonka was substituted for the old version when the rules of Royal Astronomical Bureau was reformed in A.D. 1791. In conclusion, the parent sources of the charts and footnotes of the new Pochonka might be imported from the Ching dynasty around 1709 A.D. to form the new Pochonka between A.D. 1709 and A.D. 1791, and finally to be published in A.D. 1792. We discuss the possible future works to make a firm conclusion.

  15. Utility-preserving anonymization for health data publishing.

    Science.gov (United States)

    Lee, Hyukki; Kim, Soohyung; Kim, Jong Wook; Chung, Yon Dohn

    2017-07-11

    Publishing raw electronic health records (EHRs) may be considered as a breach of the privacy of individuals because they usually contain sensitive information. A common practice for the privacy-preserving data publishing is to anonymize the data before publishing, and thus satisfy privacy models such as k-anonymity. Among various anonymization techniques, generalization is the most commonly used in medical/health data processing. Generalization inevitably causes information loss, and thus, various methods have been proposed to reduce information loss. However, existing generalization-based data anonymization methods cannot avoid excessive information loss and preserve data utility. We propose a utility-preserving anonymization for privacy preserving data publishing (PPDP). To preserve data utility, the proposed method comprises three parts: (1) utility-preserving model, (2) counterfeit record insertion, (3) catalog of the counterfeit records. We also propose an anonymization algorithm using the proposed method. Our anonymization algorithm applies full-domain generalization algorithm. We evaluate our method in comparison with existence method on two aspects, information loss measured through various quality metrics and error rate of analysis result. With all different types of quality metrics, our proposed method show the lower information loss than the existing method. In the real-world EHRs analysis, analysis results show small portion of error between the anonymized data through the proposed method and original data. We propose a new utility-preserving anonymization method and an anonymization algorithm using the proposed method. Through experiments on various datasets, we show that the utility of EHRs anonymized by the proposed method is significantly better than those anonymized by previous approaches.

  16. Open-Access Publishing

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2013-06-01

    Full Text Available Nature, one of the most prominent scientific journals dedicated one of its issues to recent changes in scientific publishing (Vol. 495, Issue 7442, 27 March 2013. Its editors stressed that words technology and revolution are closely related when it comes to scientific publishing. In addition, the transformation of research publishing is not as much a revolution than an attrition war in which all sides are buried. The most important change they refer to is the open-access model in which an author or an institution pays in advance for publishing a paper in a journal, and the paper is then available to users on the Internet free of charge.According to preliminary results of a survey conducted among 23 000 scientists by the publisher of Nature, 45% of them believes all papers should be published in open access, but at the same time 22% of them would not allow the use of papers for commercial purposes. Attitudes toward open access vary according to scientific disciplines, leading the editors to conclude the revolution still does not suit everyone.

  17. Publisher Correction

    DEFF Research Database (Denmark)

    Turcot, Valérie; Lu, Yingchang; Highland, Heather M

    2018-01-01

    In the published version of this paper, the name of author Emanuele Di Angelantonio was misspelled. This error has now been corrected in the HTML and PDF versions of the article.......In the published version of this paper, the name of author Emanuele Di Angelantonio was misspelled. This error has now been corrected in the HTML and PDF versions of the article....

  18. A practical approach for the calculation of the activation energy of the sintering

    Directory of Open Access Journals (Sweden)

    Pouchly Vaclav

    2016-01-01

    Full Text Available Newly developed software for calculation of activation energy (Qs in the following of sintering using the Wang and Raj model is presented. To demonstrate the practical potential of the software and to evaluate the behaviour of the Qs during the sintering process, alumina and cubic zirconia ceramic compacts were prepared from nanometric powders. The results obtained with both materials are in agreement with previously published data calculated by different approaches. In the interval of interest (relative densities from 60 % to almost 100 % of theoretical density, both materials show similar behaviour. Three distinct regions can be seen: the initial constant values of Qs 868 kJ/mol and 762 kJ/mol for alumina and cubic zirconia, respectively; a region containing linear drop of Qs and the final region of constant Qs values 625 kJ/mol and 645 kJ/mol for alumina and cubic zirconia, respectively.

  19. Publishing and Revising Content

    Science.gov (United States)

    Editors and Webmasters can publish content without going through a workflow. Publishing times and dates can be set, and multiple pages can be published in bulk. Making an edit to published content created a revision.

  20. A second chance for authors of hijacked journals to publish in legitimate journals.

    Science.gov (United States)

    Jalalian, Mehrdad

    2015-01-01

    This article proposes the republication of articles that have previously been published in counterfeit websites of hijacked journals. The paper also discusses the technical and ethical aspects of republishing such articles.

  1. Publishing bioethics and bioethics--reflections on academic publishing by a journal editor.

    Science.gov (United States)

    Schüklenk, Udo

    2011-02-01

    This article by one of the Editors of Bioethics, published in the 25th anniversary issue of the journal, describes some of the revolutionary changes academic publishing has undergone during the last decades. Many humanities journals went from typically small print-runs, counting by the hundreds, to on-line availability in thousands of university libraries worldwide. Article up-take by our subscribers can be measured efficiently. The implications of this and other changes to academic publishing are discussed. Important ethical challenges need to be addressed in areas such as the enforcement of plagiarism-related policies, the so-called 'impact factor' and its impact on academic integrity, and the question of whether on-line only publishing can currently guarantee the integrity of academic publishing histories. © 2010 Blackwell Publishing Ltd.

  2. Sunburn and sun-protective behaviors among adults with and without previous nonmelanoma skin cancer (NMSC): A population-based study.

    Science.gov (United States)

    Fischer, Alexander H; Wang, Timothy S; Yenokyan, Gayane; Kang, Sewon; Chien, Anna L

    2016-08-01

    Individuals with previous nonmelanoma skin cancer (NMSC) are at increased risk for subsequent skin cancer, and should therefore limit ultraviolet exposure. We sought to determine whether individuals with previous NMSC engage in better sun protection than those with no skin cancer history. We pooled self-reported data (2005 and 2010 National Health Interview Surveys) from US non-Hispanic white adults (758 with and 34,161 without previous NMSC). We calculated adjusted prevalence odds ratios (aPOR) and 95% confidence intervals (CI), taking into account the complex survey design. Individuals with previous NMSC versus no history of NMSC had higher rates of frequent use of shade (44.3% vs 27.0%; aPOR 1.41; 95% CI 1.16-1.71), long sleeves (20.5% vs 7.7%; aPOR 1.55; 95% CI 1.21-1.98), a wide-brimmed hat (26.1% vs 10.5%; aPOR 1.52; 95% CI 1.24-1.87), and sunscreen (53.7% vs 33.1%; aPOR 2.11; 95% CI 1.73-2.59), but did not have significantly lower odds of recent sunburn (29.7% vs 40.7%; aPOR 0.95; 95% CI 0.77-1.17). Among those with previous NMSC, recent sunburn was inversely associated with age, sun avoidance, and shade but not sunscreen. Self-reported cross-sectional data and unavailable information quantifying regular sun exposure are limitations. Physicians should emphasize sunburn prevention when counseling patients with previous NMSC, especially younger adults, focusing on shade and sun avoidance over sunscreen. Copyright © 2016 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

  3. Using meta-differential evolution to enhance a calculation of a continuous blood glucose level.

    Science.gov (United States)

    Koutny, Tomas

    2016-09-01

    We developed a new model of glucose dynamics. The model calculates blood glucose level as a function of transcapillary glucose transport. In previous studies, we validated the model with animal experiments. We used analytical method to determine model parameters. In this study, we validate the model with subjects with type 1 diabetes. In addition, we combine the analytic method with meta-differential evolution. To validate the model with human patients, we obtained a data set of type 1 diabetes study that was coordinated by Jaeb Center for Health Research. We calculated a continuous blood glucose level from continuously measured interstitial fluid glucose level. We used 6 different scenarios to ensure robust validation of the calculation. Over 96% of calculated blood glucose levels fit A+B zones of the Clarke Error Grid. No data set required any correction of model parameters during the time course of measuring. We successfully verified the possibility of calculating a continuous blood glucose level of subjects with type 1 diabetes. This study signals a successful transition of our research from an animal experiment to a human patient. Researchers can test our model with their data on-line at https://diabetes.zcu.cz. Copyright © 2016 The Author. Published by Elsevier Ireland Ltd.. All rights reserved.

  4. What Desktop Publishing Can Teach Professional Writing Students about Publishing.

    Science.gov (United States)

    Dobberstein, Michael

    1992-01-01

    Points out that desktop publishing is a metatechnology that allows professional writing students access to the production phase of publishing, giving students hands-on practice in preparing text for printing and in learning how that preparation affects the visual meaning of documents. (SR)

  5. Theoretical calculations of positron lifetimes for metal oxides

    International Nuclear Information System (INIS)

    Mizuno, Masataka; Araki, Hideki; Shirai, Yasuharu

    2004-01-01

    Our recent positron lifetime measurements for metal oxides suggest that positron lifetimes of bulk state in metal oxides are shorter than previously reported values. We have performed theoretical calculations of positron lifetimes for bulk and vacancy states in MgO and ZnO using first-principles electronic structure calculations and discuss the validity of positron lifetime calculations for insulators. By comparing the calculated positron lifetimes to the experimental values, it wa found that the semiconductor model well reproduces the experimental positron lifetime. The longer positron lifetime previously reported can be considered to arise from not only the bulk but also from the vacancy induced by impurities. In the case of cation vacancy, the calculated positron lifetime based on semiconductor model is shorter than the experimental value, which suggests that the inward relaxation occurs around the cation vacancy trapping the positron. (author)

  6. [Trends of electronic publishing in medicine and life sciences].

    Science.gov (United States)

    Strelski-Waisman, Neta; Waisman, Dan

    2005-09-01

    Scientific publication in the electronic media is gaining popularity in academic libraries, research institutions and commercial organizations. The electronic journal may shorten the processes of writing and publication, decrease publication and distribution costs, and enable access from any location in the world. Electronic publications have unique advantages: it is possible to search them, to create hyperlinks to references and footnotes, as well as to information on the web and to include graphics and photographs at a very low cost. Audio, video and tri-dimensional images may also be included. Electronic publishing may also speed up review and publication processes and enable the writer to receive immediate feedback through the web. However, in spite of the advantages, there are certain points that must be considered: accessibility to previously published material is not guaranteed as databases are not always stable and coverage may change without notice. In addition, the price that commercial publishers charge for their services may be very high or be subject to the purchase of a packaged deal that may include unwanted databases. Many issues of copyright and the use of published material are not yet finalized. In this review we discuss the advantages and disadvantages of the electronic scientific publication, the feasibility of keeping appropriate quality and peer-review process, the stability and accessibility of databases managed by the publishers and the acceptance of the electronic format by scientists and clinicians.

  7. Simulative calculation of bromo-polystyrene mechanical properties

    CERN Document Server

    Wang Chao; Tang Yong Jian

    2002-01-01

    The non-crystal model of polystyrene and bromo-polystyrene was established with the help of simulative software in the computer. DREIDING was chosen as force field and its parameters is modified according to the published data. Based on the calculation results and other published data the mechanism properties of polystyrene and bromo-polystyrene, such as bulk module, Yong's module and Poisson's ratios, were discussed

  8. Time dependence, complex scaling, and the calculation of resonances in many-electron systems

    International Nuclear Information System (INIS)

    Nicolaides, C.A.; Beck, D.R.

    1978-01-01

    The theory deals with certain aspects of the formal properties of atomic and molecular highly excited nonstationary states and the problem of calculating their wave functions, energies, and widths. The conceptual framework is a decay theory based on the consistent definition and calculation of the t = 0 localized state, vertical bar psi 0 >. Given this framework, the following topics are treated: The variational calculation of psi 0 and E 0 using a previously published theory that generalized the projection operator approach to many-electron systems. The exact definition of the resonance energy. The possibility of bound states in the continuum. The relation of psi 0 to the resonance (Gamow) function psi and of the Hamiltonian to the rotated Hamiltonian H(theta) based on the notion of perturbation of boundary conditions in the asymptotic region. The variational calculation of real and complex energies employing matrix elements of H and H 2 with square-integrable and resonance functions. The mathematical structure of the time evolution of vertical bar psi 0 > and the possibility of observing nonexponential decays in certain autoionizing states that are very close to the ionization threshold. A many-body theory of atomic and molecular resonances that employs the coordinate rotation method. 107 references

  9. Calculating the dermal flux of chemicals with OELs based on their molecular structure: An attempt to assign the skin notation.

    Science.gov (United States)

    Kupczewska-Dobecka, Małgorzata; Jakubowski, Marek; Czerczak, Sławomir

    2010-09-01

    Our objectives included calculating the permeability coefficient and dermal penetration rates (flux value) for 112 chemicals with occupational exposure limits (OELs) according to the LFER (linear free-energy relationship) model developed using published methods. We also attempted to assign skin notations based on each chemical's molecular structure. There are many studies available where formulae for coefficients of permeability from saturated aqueous solutions (K(p)) have been related to physicochemical characteristics of chemicals. The LFER model is based on the solvation equation, which contains five main descriptors predicted from chemical structure: solute excess molar refractivity, dipolarity/polarisability, summation hydrogen bond acidity and basicity, and the McGowan characteristic volume. Descriptor values, available for about 5000 compounds in the Pharma Algorithms Database were used to calculate permeability coefficients. Dermal penetration rate was estimated as a ratio of permeability coefficient and concentration of chemical in saturated aqueous solution. Finally, estimated dermal penetration rates were used to assign the skin notation to chemicals. Defined critical fluxes defined from the literature were recommended as reference values for skin notation. The application of Abraham descriptors predicted from chemical structure and LFER analysis in calculation of permeability coefficients and flux values for chemicals with OELs was successful. Comparison of calculated K(p) values with data obtained earlier from other models showed that LFER predictions were comparable to those obtained by some previously published models, but the differences were much more significant for others. It seems reasonable to conclude that skin should not be characterised as a simple lipophilic barrier alone. Both lipophilic and polar pathways of permeation exist across the stratum corneum. It is feasible to predict skin notation on the basis of the LFER and other published

  10. Reinvention of publishers' revenue model: expectations of advertisers towards publishers' products

    OpenAIRE

    Koller, Hans; Dennstedt, Bianca

    2017-01-01

    Publishers have to reconsider their revenue model. Facing a massive decline in the circulation of newspapers and magazines over the past years, publishers have lost not only readers but also many advertisers. Thus, publishers are faced with both changed customer expectations as well as difficulty in generating profit. Users are increasingly less willing to pay for digital products and their expectations of digital content have changed: They would like to contribute their own content as well a...

  11. Update on Light-Ion Calculations

    International Nuclear Information System (INIS)

    Schultz, David R.

    2013-01-01

    During the time span of the CRP, calculations were (1) initiated extending previous work regarding elastic and transport cross sections relevant to light-species impurity-ion transport modeling, (2) completed for total and state-selective charge transfer (C 5+ , N 6+ , O 6+ , O 7+ + H; C 5+ , C 6+ , O 7+ , O 8+ + He; and C 6+ + H, H 2 ) for diagnostics such as charge exchange recombination spectroscopy, and (3) completed for excitation of atomic hydrogen by ion impact (H + , He 2+ , Be 4+ , C 6+ ) for diagnostics including beam emission spectroscopy and motional Stark effect spectroscopy. The first calculations undertaken were to continue work begun more than a decade ago providing plasma modelers with elastic total and differential cross sections, and related transport cross sections, used to model transport of hydrogen ions, atoms, and molecules as well as other species including intrinsic and extrinsic impurities. This body of work was reviewed in the course of reporting recent new calculations in a recent paper (P.S. Krstic and D.R. Schultz, Physics of Plasmas, 16, 053503 (2009)). After initial calculations for H + + O were completed, work was discontinued in light of other priorities. Charge transfer data for diagnostics provide important knowledge about the state of the plasma from the edge to the core and are therefore of significant interest to continually evaluate and improve. Further motivation for such calculations comes from recent and ongoing benchmark measurements of the total charge transfer cross section being made at Oak Ridge National Laboratory by C.C. Havener and collaborators. We have undertaken calculations using a variety of theoretical approaches, each applicable within a range of impact energies, that have led to the creation of a database of recommended state-selective and total cross sections composed of results from the various methods (MOCC, AOCC, CTMC, results from the literature) within their overlapping ranges of applicability

  12. Publisher Correction

    DEFF Research Database (Denmark)

    Bonàs-Guarch, Sílvia; Guindo-Martínez, Marta; Miguel-Escalada, Irene

    2018-01-01

    In the originally published version of this Article, the affiliation details for Santi González, Jian'an Luan and Claudia Langenberg were inadvertently omitted. Santi González should have been affiliated with 'Barcelona Supercomputing Center (BSC), Joint BSC-CRG-IRB Research Program in Computatio......In the originally published version of this Article, the affiliation details for Santi González, Jian'an Luan and Claudia Langenberg were inadvertently omitted. Santi González should have been affiliated with 'Barcelona Supercomputing Center (BSC), Joint BSC-CRG-IRB Research Program...

  13. Initialization bias suppression in iterative Monte Carlo calculations: benchmarks on criticality calculation

    International Nuclear Information System (INIS)

    Richet, Y.; Jacquet, O.; Bay, X.

    2005-01-01

    The accuracy of an Iterative Monte Carlo calculation requires the convergence of the simulation output process. The present paper deals with a post processing algorithm to suppress the transient due to initialization applied on criticality calculations. It should be noticed that this initial transient suppression aims only at obtaining a stationary output series, then the convergence of the calculation needs to be guaranteed independently. The transient suppression algorithm consists in a repeated truncation of the first observations of the output process. The truncation of the first observations is performed as long as a steadiness test based on Brownian bridge theory is negative. This transient suppression method was previously tuned for a simplified model of criticality calculations, although this paper focuses on the efficiency on real criticality calculations. The efficiency test is based on four benchmarks with strong source convergence problems: 1) a checkerboard storage of fuel assemblies, 2) a pin cell array with irradiated fuel, 3) 3 one-dimensional thick slabs, and 4) an array of interacting fuel spheres. It appears that the transient suppression method needs to be more widely validated on real criticality calculations before any blind using as a post processing in criticality codes

  14. Getting Your Textbook Published.

    Science.gov (United States)

    Irwin, Armond J.

    1982-01-01

    Points to remember in getting a textbook published are examined: book idea, publisher's sales representatives, letter of inquiry, qualifications for authorship, author information form, idea proposal, reviews, marketing and sales, publishing agreement, author royalties, and copyright assignment. (CT)

  15. Ab-initio ZORA calculations

    NARCIS (Netherlands)

    Faas, S.; Snijders, Jaap; van Lenthe, J.H.; HernandezLaguna, A; Maruani, J; McWeeny, R; Wilson, S

    2000-01-01

    In this paper we present the first application of the ZORA (Zeroth Order Regular Approximation of the Dirac Fock equation) formalism in Ab Initio electronic structure calculations. The ZORA method, which has been tested previously in the context of Density Functional Theory, has been implemented in

  16. Publisher Correction to

    NARCIS (Netherlands)

    Barrio, Isabel C.; Lindén, Elin; Beest, Te Mariska; Olofsson, Johan; Rocha, Adrian; Soininen, Eeva M.; Alatalo, Juha M.; Andersson, Tommi; Asmus, Ashley; Boike, Julia; Bråthen, Kari Anne; Bryant, John P.; Buchwal, Agata; Bueno, C.G.; Christie, Katherine S.; Egelkraut, Dagmar; Ehrich, Dorothee; Fishback, Lee Ann; Forbes, Bruce C.; Gartzia, Maite; Grogan, Paul; Hallinger, Martin; Heijmans, Monique M.P.D.; Hik, David S.; Hofgaard, Annika; Holmgren, Milena; Høye, Toke T.; Huebner, Diane C.; Jónsdóttir, Ingibjörg Svala; Kaarlejärvi, Elina; Kumpula, Timo; Lange, Cynthia Y.M.J.G.; Lange, Jelena; Lévesque, Esther; Limpens, Juul; Macias-Fauria, Marc; Myers-Smith, Isla; Nieukerken, van Erik J.; Normand, Signe; Post, Eric S.; Schmidt, Niels Martin; Sitters, Judith; Skoracka, Anna; Sokolov, Alexander; Sokolova, Natalya; Speed, James D.M.; Street, Lorna E.; Sundqvist, Maja K.; Suominen, Otso; Tananaev, Nikita; Tremblay, Jean Pierre; Urbanowicz, Christine; Uvarov, Sergey A.; Watts, David; Wilmking, Martin; Wookey, Philip A.; Zimmermann, Heike H.; Zverev, Vitali; Kozlov, Mikhail V.

    2018-01-01

    The above mentioned article was originally scheduled for publication in the special issue on Ecology of Tundra Arthropods with guest editors Toke T. Høye . Lauren E. Culler. Erroneously, the article was published in Polar Biology, Volume 40, Issue 11, November, 2017. The publisher sincerely

  17. A survey on the reference citation in the case reports published in The Journal of the Korean Radiological Society

    International Nuclear Information System (INIS)

    Lee, Hong Jae; Lee, Han Jin; Park, Seog Hee; Kim, Choon Yul; Bahk, Yong Whee; Shinn, Kyung Sub

    1993-01-01

    We analyzed 105 case reports published in The Journal of the Korean Radiological Society between 1975 and 1985. The objectives of this studies were to find out (1) whether those case reports were truly original or not as far as domestic publications were concerned and (2) whether their citations of domestic literatures were correct. In two papers, we found previous reports published already in the domestic journal in spite of the authors' claim as their 'first case reports'. In 105 case reports, only 94 references were cited while 151 omitted. It is concluded that a case report must include a statement to authentically clarify whether similar report had been previously published through meticulous review of published literatures. We also recommend to computerize the index of domestic literatures

  18. MCNP HPGe detector benchmark with previously validated Cyltran model.

    Science.gov (United States)

    Hau, I D; Russ, W R; Bronson, F

    2009-05-01

    An exact copy of the detector model generated for Cyltran was reproduced as an MCNP input file and the detection efficiency was calculated similarly with the methodology used in previous experimental measurements and simulation of a 280 cm(3) HPGe detector. Below 1000 keV the MCNP data correlated to the Cyltran results within 0.5% while above this energy the difference between MCNP and Cyltran increased to about 6% at 4800 keV, depending on the electron cut-off energy.

  19. Desktop Publishing Made Simple.

    Science.gov (United States)

    Wentling, Rose Mary

    1989-01-01

    The author discusses the types of computer hardware and software necessary to set up a desktop publishing system, both for use in educational administration and for instructional purposes. Classroom applications of desktop publishing are presented. The author also provides guidelines for preparing to teach desktop publishing. (CH)

  20. Desktop Publishing: A Brave New World and Publishing from the Desktop.

    Science.gov (United States)

    Lormand, Robert; Rowe, Jane J.

    1988-01-01

    The first of two articles presents basic selection criteria for desktop publishing software packages, including discussion of expectations, required equipment, training costs, publication size, desired software features, additional equipment needed, and quality control. The second provides a brief description of desktop publishing using the Apple…

  1. Calculation of neutron kerma in tissues

    International Nuclear Information System (INIS)

    Vega C, H.R.; Manzanares A, E.

    2004-01-01

    Neutron kerma of normal and tumor tissues has been calculated using the tissues elemental concentration. A program developed in Math cad contains the kerma factors of C, H, O, N, Na, Mg, P, S, Cl, K, etc. that are in normal and tumor human tissues. Having the elemental composition of any human tissue the neutron kerma can be calculated. The program was tested using the elemental composition of tumor tissues such as sarcoma, melanoma, carcinoma and adenoid cystic, also neutron kerma for adipose and muscle tissue for normal adult was calculated. The results are in agreement with those published in literature. The neutron kerma for water was also calculated because in some dosimetric calculations water is used to describe normal and tumor tissues. From this comparison was found that at larger energies kerma factors are approximately the same, but energies less than 100 eV the differences are large. (Author)

  2. E-publishing and multimodalities

    OpenAIRE

    Yngve Nordkvelle

    2008-01-01

    In the literature of e-publishing there has been a consistent call from the advent of e-publishing on, until now, to explore new ways of expressing ideas through the new media. It has been claimed that the Internet opens an alley of possibilities and opportunites for publishing that will change the ways of publishing once and for all. In the area of publication of e-journals, however, the call for changes has received very modest responds.The thing is, it appears, that the conventional paper ...

  3. A Gaussian quadrature method for total energy analysis in electronic state calculations

    Science.gov (United States)

    Fukushima, Kimichika

    This article reports studies by Fukushima and coworkers since 1980 concerning their highly accurate numerical integral method using Gaussian quadratures to evaluate the total energy in electronic state calculations. Gauss-Legendre and Gauss-Laguerre quadratures were used for integrals in the finite and infinite regions, respectively. Our previous article showed that, for diatomic molecules such as CO and FeO, elliptic coordinates efficiently achieved high numerical integral accuracy even with a numerical basis set including transition metal atomic orbitals. This article will generalize straightforward details for multiatomic systems with direct integrals in each decomposed elliptic coordinate determined from the nuclear positions of picked-up atom pairs. Sample calculations were performed for the molecules O3 and H2O. This article will also try to present, in another coordinate, a numerical integral by partially using the Becke's decomposition published in 1988, but without the Becke's fuzzy cell generated by the polynomials of internuclear distance between the pair atoms. Instead, simple nuclear weights comprising exponential functions around nuclei are used. The one-center integral is performed with a Gaussian quadrature pack in a spherical coordinate, included in the author's original program in around 1980. As for this decomposition into one-center integrals, sample calculations are carried out for Li2.

  4. Academic Nightmares: Predatory Publishing

    Science.gov (United States)

    Van Nuland, Sonya E.; Rogers, Kem A.

    2017-01-01

    Academic researchers who seek to publish their work are confronted daily with a barrage of e-mails from aggressive marketing campaigns that solicit them to publish their research with a specialized, often newly launched, journal. Known as predatory journals, they often promise high editorial and publishing standards, yet their exploitive business…

  5. Radiation damage calculations for compound materials

    International Nuclear Information System (INIS)

    Greenwood, L.R.

    1990-01-01

    This paper reports on the SPECOMP computer code, developed to calculate neutron-induced displacement damage cross sections for compound materials such as alloys, insulators, and ceramic tritium breeders for fusion reactors. These new calculations rely on recoil atom energy distributions previously computed with the DISCS computer code, the results of which are stored in SPECTER computer code master libraries. All reaction channels were considered in the DISCS calculations and the neutron cross sections were taken from ENDF/B-V. Compound damage calculations with SPECOMP thus do not need to perform any recoil atom calculations and consequently need no access to ENDF or other neutron data bases. The calculations proceed by determining secondary displacements for each combination of recoil atom and matrix atom using the Lindhard partition of the recoil energy to establish the damage energy

  6. [Parathyroid cancer in a patient with previous history of hypernephroma: a clinical case].

    Science.gov (United States)

    Martín Navarro, J; Mendoza, E; Mateos, P; Cereceda, A; Coca, S

    2007-01-01

    We report the clinical case of a 55 year-old male patient, with a previous history of nephrectomy by hypernephroma sixteen years ago, first presenting hypercalcemia and rising of intact parathyroid hormone (iPTH) levels. A localization study revealed an intrathyroid nodule with cystic appearance. After undergoing a hemi-thyroidectomy, the patient is diagnosed with parathyroid carcinoma. This article analyzes previously published cases presenting parathyroidal pathologies associated with hypernephroma. A broader differential diagnosis--including the screening of parathyroidal pathologies should be considered in patients with hypercalcemia and hypernephroma.

  7. Radiative flux calculations at UV and visible wavelengths

    International Nuclear Information System (INIS)

    Grossman, A.S.; Grant, K.E.; Wuebbles, D.J.

    1993-10-01

    A radiative transfer model to calculate the short wavelength fluxes at altitudes between 0 and 80 km has been developed at LLNL. The wavelength range extends from 175--735 nm. This spectral range covers the UV-B wavelength region, 250--350 nm, with sufficient resolution to allow comparison of UV-B measurements with theoretical predictions. Validation studies for the model have been made for both UV-B ground radiation calculations and tropospheric solar radiative forcing calculations for various ozone distributions. These studies indicate that the model produces results which agree well with respect to existing UV calculations from other published models

  8. Preresidency publication record and its association with publishing during paediatric residency.

    Science.gov (United States)

    Gupta, Ronish; Norris, Mark Lorne; Writer, Hilary

    2016-05-01

    To determine whether an association exists between the publication of journal articles before and during paediatrics residency. A retrospective search of PubMed was conducted for publications by all 567 Canadian paediatricians certified between 2009 and 2012, inclusive. Paediatricians were separated into groups based on the number of articles published preresidency (0 or ≥1) and during residency (0 or ≥1). The methodology was validated using a group of local paediatricians who were contacted to verify whether their publications were identified accurately. A total of 160 of 567 (28%) certified paediatricians had preresidency publications; of these, 93 (58%) subsequently published during their residency period. Among the remaining 407 (72%) paediatricians without preresidency publications, 129 (32%) published during residency. The association between publication before and during paediatric residency was statistically significant (OR 2.98 [95% CI 2.04 to 4.36]; Ppublication status with 87% and 90% accuracy, respectively. Individuals with previous publications were more likely to publish as residents; however, 42% of individuals with pre-residency publications did not publish as residents. Residency selection committees may find these data helpful in assessing the publication potential of their applicants. In addition, this information may assist in building more targeted and individualized research curricula within residency programs.

  9. Publishing: The Creative Business.

    Science.gov (United States)

    Bohne, Harald; Van Ierssel, Harry

    This book offers guidelines to emerging and would-be publishers, whether they plan to enter publishing as a career, a sideline, or a diversion. It stresses the business aspects of publishing and emphasizes the major housekeeping functions encountered in the business, except methods of sales and distribution. Contents include "The Mechanics of…

  10. The vibrational structure of (E,E’)-1,4-diphenyl-1,3-butadiene. Linear dichroism FTIR spectroscopy and quantum chemical calculations

    DEFF Research Database (Denmark)

    Hansen, Bjarke Knud Vilster; Møller, Søren; Spanget-Larsen, Jens

    2006-01-01

    than 40 vibrational transitions. The observed IR wavenumbers, relative intensities, and polarization directions were generally well reproduced by the results of a harmonic analysis based on B3LYP/cc-pVTZ density functional theory (DFT). The combined experimental and theoretical results led to proposal...... of a nearly complete assignment of the IR active fundamentals of DPB, involving reassignment of a number of transitions. In addition, previously published Raman spectra of DPB were well predicted by the B3LYP/cc-pVTZ calculations....

  11. Persistent seropositivity for yellow fever in a previously vaccinated autologous hematopoietic stem cell transplantation recipient.

    Science.gov (United States)

    Hayakawa, Kayoko; Takasaki, Tomohiko; Tsunemine, Hiroko; Kanagawa, Shuzo; Kutsuna, Satoshi; Takeshita, Nozomi; Mawatari, Momoko; Fujiya, Yoshihiro; Yamamoto, Kei; Ohmagari, Norio; Kato, Yasuyuki

    2015-08-01

    The duration of a protective level of yellow fever antibodies after autologous hematopoietic stem cell transplantation in a previously vaccinated person is unclear. The case of a patient who had previously been vaccinated for yellow fever and who remained seropositive for 22 months after autologous peripheral blood stem cell transplantation for malignant lymphoma is described herein. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  12. Analysis of the ITER computational shielding benchmark with the Monte Carlo TRIPOLI-4® neutron gamma coupled calculations

    International Nuclear Information System (INIS)

    Lee, Yi-Kang

    2016-01-01

    Highlights: • Verification and validation of TRIPOLI-4 radiation transport calculations for ITER shielding benchmark. • Evaluation of CEA-V5.1.1 and FENDL-3.0 nuclear data libraries on D–T fusion neutron continuous energy transport calculations. • Advances in nuclear analyses for nuclear heating and radiation damage in iron. • This work also demonstrates that the “safety factors” concept is necessary in the nuclear analyses of ITER. - Abstract: With the growing interest in using the continuous-energy TRIPOLI-4 ® Monte Carlo radiation transport code for ITER applications, a key issue that arises is whether or not the released TRIPOLI-4 code and its associated nuclear data libraries are verified and validated for the D–T fusion neutronics calculations. Previous published benchmark results of TRIPOLI-4 code on the ITER related activities have concentrated on the first wall loading, the reactor dosimetry, the nuclear heating, and the tritium breeding ratio. To enhance the TRIPOLI-4 verification and validation on neutron-gamma coupled calculations for fusion device application, the computational ITER shielding benchmark of M. E. Sawan was performed in this work by using the 2013 released TRIPOLI-4.9S code and the associated CEA-V5.1.1 data library. First wall, blanket, vacuum vessel and toroidal field magnet of the inboard and outboard components were fully modelled in this 1-D toroidal cylindrical benchmark. The 14.1 MeV source neutrons were sampled from a uniform isotropic distribution in the plasma zone. Nuclear responses including neutron and gamma fluxes, nuclear heating, and material damage indicator were benchmarked against previous published results. The capabilities of the TRIPOLI-4 code on the evaluation of above physics parameters were presented. The nuclear data library from the new FENDL-3.0 evaluation was also benchmarked against the CEA-V5.1.1 results for the neutron transport calculations. The results show that both data libraries can be

  13. Neuraxial blocks and spinal haematoma: Review of 166 case reports published 1994-2015. Part 1: Demographics and risk-factors.

    Science.gov (United States)

    Lagerkranser, Michael

    2017-04-01

    Bleeding into the vertebral canal causing a spinal haematoma (SH) is a rare but serious complication to central neuraxial blocks (CNB). Of all serious complications to CNBs such as meningitis, abscess, cardiovascular collapse, and nerve injury, neurological injury associated with SH has the worst prognosis for permanent harm. Around the turn of the millennium, the first guidelines were published that aimed to reduce the risk of this complication. These guidelines are based on known risk factors for SH, rather than evidence from randomised, controlled trials (RCTs). RCTs, and therefore meta-analysis of RCTs, are not appropriate for identifying rare events. Analysing published case reports of rare complications may at least reveal risk factors and can thereby improve management of CNBs. The aims of the present review were to analyse case reports of SH after CNBs published between 1994 and 2015, and compare these with previous reviews of case reports. MEDLINE and EMBASE were used for identifying case reports published in English, German, or Scandinavian languages, using appropriate search terms. Reference lists were also scrutinised for case reports. Twenty different variables from each case were specifically searched for and filled out on an Excel spreadsheet, and incidences were calculated using the number of informative reports as denominator for each variable. Altogether 166 case reports on spinal haematoma after CNB published during the years between 1994 and 2015 were collected. The annual number of case reports published during this period almost trebled compared with the two preceding decades. This trend continued even after the first guidelines on safe practice of CNBs appeared around year 2000, although more cases complied with such guidelines during the second half of the observation period (2005-2015) than during the first half. Three types of risk factors dominated: (1) Patient-related risk factors such as haemostatic and spinal disorders, (2) CNB

  14. Publishing studies: what else?

    Directory of Open Access Journals (Sweden)

    Bertrand Legendre

    2015-07-01

    Full Text Available This paper intends to reposition “publishing studies” in the long process that goes from the beginning of book history to the current research on cultural industries. It raises questions about interdisciplinarity and the possibility of considering publishing independently of other sectors of the media and cultural offerings. Publishing is now included in a large range of industries and, at the same time, analyses tend to become more and more segmented according to production sectors and scientific fields. In addition to the problems created, from the professional point of view, by this double movement, this one requires a questioning of the concept of “publishing studies”.

  15. Shielding calculation for treatment rooms of high energy linear accelerator

    International Nuclear Information System (INIS)

    Elleithy, M.A.

    2006-01-01

    A review of German Institute of Standardization (DIN) scheme of the shielding calculation and the essential data required has been done for X-rays and electron beam in the energy range from 1 MeV to 50 MeV. Shielding calculation was done for primary and secondary radiations generated during X-ray operation of Linac. In addition, shielding was done against X-rays generated (Bremsstrahlung) by useful electron beams. The calculations also covered the neutrons generated from the interactions of useful X-rays (at energies above 8 MeV) with the surrounding. The present application involved the computation of shielding against the double scattered components of X-rays and neutrons in the maze area and the thickness of the paraffin wax of the room door. A new developed computer program was designed to assist shielding thickness calculations for a new Linac installation or in replacing an existing machine. The program used a combination of published tables and figures in computing the shielding thickness at different locations for all possible radiation situations. The DIN published data of 40 MeV accelerator room was compared with the program calculations. It was found that there is good agreement between both calculations. The developed program improved the accuracy and speed of calculation

  16. Band-structure calculations of noble-gas and alkali halide solids using accurate Kohn-Sham potentials with self-interaction correction

    International Nuclear Information System (INIS)

    Li, Y.; Krieger, J.B.; Norman, M.R.; Iafrate, G.J.

    1991-01-01

    The optimized-effective-potential (OEP) method and a method developed recently by Krieger, Li, and Iafrate (KLI) are applied to the band-structure calculations of noble-gas and alkali halide solids employing the self-interaction-corrected (SIC) local-spin-density (LSD) approximation for the exchange-correlation energy functional. The resulting band gaps from both calculations are found to be in fair agreement with the experimental values. The discrepancies are typically within a few percent with results that are nearly the same as those of previously published orbital-dependent multipotential SIC calculations, whereas the LSD results underestimate the band gaps by as much as 40%. As in the LSD---and it is believed to be the case even for the exact Kohn-Sham potential---both the OEP and KLI predict valence-band widths which are narrower than those of experiment. In all cases, the KLI method yields essentially the same results as the OEP

  17. δ-dependency for privacy-preserving XML data publishing.

    Science.gov (United States)

    Landberg, Anders H; Nguyen, Kinh; Pardede, Eric; Rahayu, J Wenny

    2014-08-01

    An ever increasing amount of medical data such as electronic health records, is being collected, stored, shared and managed in large online health information systems and electronic medical record systems (EMR) (Williams et al., 2001; Virtanen, 2009; Huang and Liou, 2007) [1-3]. From such rich collections, data is often published in the form of census and statistical data sets for the purpose of knowledge sharing and enabling medical research. This brings with it an increasing need for protecting individual people privacy, and it becomes an issue of great importance especially when information about patients is exposed to the public. While the concept of data privacy has been comprehensively studied for relational data, models and algorithms addressing the distinct differences and complex structure of XML data are yet to be explored. Currently, the common compromise method is to convert private XML data into relational data for publication. This ad hoc approach results in significant loss of useful semantic information previously carried in the private XML data. Health data often has very complex structure, which is best expressed in XML. In fact, XML is the standard format for exchanging (e.g. HL7 version 3(1)) and publishing health information. Lack of means to deal directly with data in XML format is inevitably a serious drawback. In this paper we propose a novel privacy protection model for XML, and an algorithm for implementing this model. We provide general rules, both for transforming a private XML schema into a published XML schema, and for mapping private XML data to the new privacy-protected published XML data. In addition, we propose a new privacy property, δ-dependency, which can be applied to both relational and XML data, and that takes into consideration the hierarchical nature of sensitive data (as opposed to "quasi-identifiers"). Lastly, we provide an implementation of our model, algorithm and privacy property, and perform an experimental analysis

  18. Publishers and repositories

    CERN Multimedia

    CERN. Geneva

    2007-01-01

    The impact of self-archiving on journals and publishers is an important topic for all those involved in scholarly communication. There is some evidence that the physics arXiv has had no impact on physics journals, while 'economic common sense' suggests that some impact is inevitable. I shall review recent studies of librarian attitudes towards repositories and journals, and place this in the context of IOP Publishing's experiences with arXiv. I shall offer some possible reasons for the mis-match between these perspectives and then discuss how IOP has linked with arXiv and experimented with OA publishing. As well as launching OA journals we have co-operated with Cornell and the arXiv on Eprintweb.org, a platform that offers new features to repository users. View Andrew Wray's biography

  19. Previously unknown species of Aspergillus.

    Science.gov (United States)

    Gautier, M; Normand, A-C; Ranque, S

    2016-08-01

    The use of multi-locus DNA sequence analysis has led to the description of previously unknown 'cryptic' Aspergillus species, whereas classical morphology-based identification of Aspergillus remains limited to the section or species-complex level. The current literature highlights two main features concerning these 'cryptic' Aspergillus species. First, the prevalence of such species in clinical samples is relatively high compared with emergent filamentous fungal taxa such as Mucorales, Scedosporium or Fusarium. Second, it is clearly important to identify these species in the clinical laboratory because of the high frequency of antifungal drug-resistant isolates of such Aspergillus species. Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) has recently been shown to enable the identification of filamentous fungi with an accuracy similar to that of DNA sequence-based methods. As MALDI-TOF MS is well suited to the routine clinical laboratory workflow, it facilitates the identification of these 'cryptic' Aspergillus species at the routine mycology bench. The rapid establishment of enhanced filamentous fungi identification facilities will lead to a better understanding of the epidemiology and clinical importance of these emerging Aspergillus species. Based on routine MALDI-TOF MS-based identification results, we provide original insights into the key interpretation issues of a positive Aspergillus culture from a clinical sample. Which ubiquitous species that are frequently isolated from air samples are rarely involved in human invasive disease? Can both the species and the type of biological sample indicate Aspergillus carriage, colonization or infection in a patient? Highly accurate routine filamentous fungi identification is central to enhance the understanding of these previously unknown Aspergillus species, with a vital impact on further improved patient care. Copyright © 2016 European Society of Clinical Microbiology and

  20. Does previous use affect litter box appeal in multi-cat households?

    Science.gov (United States)

    Ellis, J J; McGowan, R T S; Martin, F

    2017-08-01

    It is commonly assumed that cats actively avoid eliminated materials (especially in multi-cat homes), suggesting regular litter box cleaning as the best defense against out-of-box elimination. The relationship between previous use and litter box appeal to familiar subsequent users is currently unknown. The purpose of this study was to investigate the relationship between previous litter box use and the identity of the previous user, type of elimination, odor, and presence of physical/visual obstructions in a multi-cat household scenario. Cats preferred a clean litter box to a dirty one, but the identity of the previous user had no impact on preferences. While the presence of odor from urine and/or feces did not impact litter box preferences, the presence of odorless faux-urine and/or feces did - with the presence of faux-feces being preferred over faux-urine. Results suggest neither malodor nor chemical communication play a role in litter box preferences, and instead emphasize the importance of regular removal of physical/visual obstructions as the key factor in promoting proper litter box use. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  1. Analysis of the ITER computational shielding benchmark with the Monte Carlo TRIPOLI-4{sup ®} neutron gamma coupled calculations

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yi-Kang, E-mail: yi-kang.lee@cea.fr

    2016-11-01

    Highlights: • Verification and validation of TRIPOLI-4 radiation transport calculations for ITER shielding benchmark. • Evaluation of CEA-V5.1.1 and FENDL-3.0 nuclear data libraries on D–T fusion neutron continuous energy transport calculations. • Advances in nuclear analyses for nuclear heating and radiation damage in iron. • This work also demonstrates that the “safety factors” concept is necessary in the nuclear analyses of ITER. - Abstract: With the growing interest in using the continuous-energy TRIPOLI-4{sup ®} Monte Carlo radiation transport code for ITER applications, a key issue that arises is whether or not the released TRIPOLI-4 code and its associated nuclear data libraries are verified and validated for the D–T fusion neutronics calculations. Previous published benchmark results of TRIPOLI-4 code on the ITER related activities have concentrated on the first wall loading, the reactor dosimetry, the nuclear heating, and the tritium breeding ratio. To enhance the TRIPOLI-4 verification and validation on neutron-gamma coupled calculations for fusion device application, the computational ITER shielding benchmark of M. E. Sawan was performed in this work by using the 2013 released TRIPOLI-4.9S code and the associated CEA-V5.1.1 data library. First wall, blanket, vacuum vessel and toroidal field magnet of the inboard and outboard components were fully modelled in this 1-D toroidal cylindrical benchmark. The 14.1 MeV source neutrons were sampled from a uniform isotropic distribution in the plasma zone. Nuclear responses including neutron and gamma fluxes, nuclear heating, and material damage indicator were benchmarked against previous published results. The capabilities of the TRIPOLI-4 code on the evaluation of above physics parameters were presented. The nuclear data library from the new FENDL-3.0 evaluation was also benchmarked against the CEA-V5.1.1 results for the neutron transport calculations. The results show that both data libraries

  2. Common integration sites of published datasets identified using a graph-based framework

    Directory of Open Access Journals (Sweden)

    Alessandro Vasciaveo

    2016-01-01

    Full Text Available With next-generation sequencing, the genomic data available for the characterization of integration sites (IS has dramatically increased. At present, in a single experiment, several thousand viral integration genome targets can be investigated to define genomic hot spots. In a previous article, we renovated a formal CIS analysis based on a rigid fixed window demarcation into a more stretchy definition grounded on graphs. Here, we present a selection of supporting data related to the graph-based framework (GBF from our previous article, in which a collection of common integration sites (CIS was identified on six published datasets. In this work, we will focus on two datasets, ISRTCGD and ISHIV, which have been previously discussed. Moreover, we show in more detail the workflow design that originates the datasets.

  3. Books average previous decade of economic misery.

    Science.gov (United States)

    Bentley, R Alexander; Acerbi, Alberto; Ormerod, Paul; Lampos, Vasileios

    2014-01-01

    For the 20(th) century since the Depression, we find a strong correlation between a 'literary misery index' derived from English language books and a moving average of the previous decade of the annual U.S. economic misery index, which is the sum of inflation and unemployment rates. We find a peak in the goodness of fit at 11 years for the moving average. The fit between the two misery indices holds when using different techniques to measure the literary misery index, and this fit is significantly better than other possible correlations with different emotion indices. To check the robustness of the results, we also analysed books written in German language and obtained very similar correlations with the German economic misery index. The results suggest that millions of books published every year average the authors' shared economic experiences over the past decade.

  4. The BiPublishers ranking: Main results and methodological problems when constructing rankings of academic publishers

    Directory of Open Access Journals (Sweden)

    Torres-Salinas, Daniel

    2015-12-01

    Full Text Available We present the results of the Bibliometric Indicators for Publishers project (also known as BiPublishers. This project represents the first attempt to systematically develop bibliometric publisher rankings. The data for this project was derived from the Book Citation Index and the study time period was 2009-2013. We have developed 42 rankings: 4 by fields and 38 by disciplines. We display six indicators for publishers divided into three types: output, impact and publisher’s profile. The aim is to capture different characteristics of the research performance of publishers. 254 publishers were processed and classified according to publisher type: commercial publishers and university presses. We present the main publishers by field and then discuss the principal challenges presented when developing this type of tool. The BiPublishers ranking is an on-going project which aims to develop and explore new data sources and indicators to better capture and define the research impact of publishers.Presentamos los resultados del proyecto Bibliometric Indicators for Publishers (BiPublishers. Es el primer proyecto que desarrolla de manera sistemática rankings bibliométricos de editoriales. La fuente de datos empleada es el Book Citation Index y el periodo de análisis 2009-2013. Se presentan 42 rankings: 4 por áreas y 38 por disciplinas. Mostramos seis indicadores por editorial divididos según su tipología: producción, impacto y características editoriales. Se procesaron 254 editoriales y se clasificaron según el tipo: comerciales y universitarias. Se presentan las principales editoriales por áreas. Después, se discuten los principales retos a superar en el desarrollo de este tipo de herramientas. El ranking Bipublishers es un proyecto en desarrollo que persigue analizar y explorar nuevas fuentes de datos e indicadores para captar y definir el impacto de las editoriales académicas.

  5. Data Sharing & Publishing at Nature Publishing Group

    Science.gov (United States)

    VanDecar, J. C.; Hrynaszkiewicz, I.; Hufton, A. L.

    2015-12-01

    In recent years, the research community has come to recognize that upon-request data sharing has important limitations1,2. The Nature-titled journals feel that researchers have a duty to share data without undue qualifications, in a manner that allows others to replicate and build upon their published findings. Historically, the Nature journals have been strong supporters of data deposition in communities with existing data mandates, and have required data sharing upon request in all other cases. To help address some of the limitations of upon-request data sharing, the Nature titles have strengthened their existing data policies and forged a new partnership with Scientific Data, to promote wider data sharing in discoverable, citeable and reusable forms, and to ensure that scientists get appropriate credit for sharing3. Scientific Data is a new peer-reviewed journal for descriptions of research datasets, which works with a wide of range of public data repositories4. Articles at Scientific Data may either expand on research publications at other journals or may be used to publish new datasets. The Nature Publishing Group has also signed the Joint Declaration of Data Citation Principles5, and Scientific Data is our first journal to include formal data citations. We are currently in the process of adding data citation support to our various journals. 1 Wicherts, J. M., Borsboom, D., Kats, J. & Molenaar, D. The poor availability of psychological research data for reanalysis. Am. Psychol. 61, 726-728, doi:10.1037/0003-066x.61.7.726 (2006). 2 Vines, T. H. et al. Mandated data archiving greatly improves access to research data. FASEB J. 27, 1304-1308, doi:10.1096/fj.12-218164 (2013). 3 Data-access practices strengthened. Nature 515, 312, doi:10.1038/515312a (2014). 4 More bang for your byte. Sci. Data 1, 140010, doi:10.1038/sdata.2014.10 (2014). 5 Data Citation Synthesis Group: Joint Declaration of Data Citation Principles. (FORCE11, San Diego, CA, 2014).

  6. A fast way for calculating longitudinal wakefields for high Q resonances

    International Nuclear Information System (INIS)

    Cheng-Yang Tan and James M Steimel

    2001-01-01

    We have come up with a way for calculating longitudinal wakefields for high Q resonances by mapping the wake functions to a two dimension vector space. Then in this space, a transformation which is basically a scale change and a rotation, allows us to calculate the new wakefield by knowing only one previous wakefield and one previous particle passage through the cavity. We will also compare this method to the brute force method which needs to know all the passages of the previous particles through the cavity

  7. Calculation of track and vertex errors for detector design studies

    International Nuclear Information System (INIS)

    Harr, R.

    1995-01-01

    The Kalman Filter technique has come into wide use for charged track reconstruction in high-energy physics experiments. It is also well suited for detector design studies, allowing for the efficient estimation of optimal track covariance matrices without the need of a hit level Monte Carlo simulation. Although much has been published about the Kalman filter equations, there is a lack of previous literature explaining how to implement the equations. In this paper, the operators necessary to implement the Kalman filter equations for two common detector configurations are worked out: a central detector in a uniform solenoidal magnetic field, and a fixed-target detector with no magnetic field in the region of the interactions. With the track covariance matrices in hand, vertex and invariant mass errors are readily calculable. These quantities are particularly interesting for evaluating experiments designed to study weakly decaying particles which give rise to displaced vertices. The optimal vertex errors are obtained via a constrained vertex fit. Solutions are presented to the constrained vertex problem with and without kinematic constraints. Invariant mass errors are obtained via propagation of errors; the use of vertex constrained track parameters is discussed. Many of the derivations are new or previously unpublished

  8. (U) Feynman-Y calculations using PARTISN

    Energy Technology Data Exchange (ETDEWEB)

    Favorite, Jeffrey A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-31

    A prescription for computing the Feynman Y as a function of coincidence gate width using a deterministic multigroup neutron transport code has been published and the results compared favorably with measurements of the BeRP ball. In this paper, we report on our project to implement the method and reproduce the results. There are several clarifications and corrections of the published prescription. We show results using two multigroup cross section libraries compared with measurements and with Monte Carlo results. Deterministic simulations of the mean count rates compare very favorably with previously published Monte Carlo results, and deterministic simulations of the Feynman Y asymptote compare somewhat favorably. In Feynman beta plots, the deterministic simulations reached the asymptotic value much sooner than did a fit to the measured data.

  9. Calculation of magnetic hyperfine constants

    International Nuclear Information System (INIS)

    Bufaical, R.F.; Maffeo, B.; Brandi, H.S.

    1975-01-01

    The magnetic hyperfine constants of the V sub(K) center in CaF 2 , SrF 2 and BaF 2 have been calculated assuming a phenomenological model, based on the F 2 - 'central molucule', to describe the wavefunction of the defect. Calculations have shown that introduction of a small degree of covalence, between this central molecule and neighboring ions, is necessary to improve the electronic structure description of the defect. It was also shown that the results for the hyperfine constants are strongly dependent on the relaxations of the ions neighboring the central molecule; these relaxations have been determined by fitting the experimental data. The present results are compared with other previous calculations where similar and different theoretical methods have been used

  10. The Academic Publishing Industry

    DEFF Research Database (Denmark)

    Nell, Phillip Christopher; Wenzel, Tim Ole; Schmidt, Florian

    2014-01-01

    The case starts with introducing the outstanding profitability of academic journal publishers such as Elsevier and then dives into describing the research process from an idea to conducting research and to publishing the results in academic journals. Subsequently, demand and supply for scientific...... journals and papers are discussed including drivers and involved parties. Furthermore, the case describes competition between suppliers, customers, and publishers. In sum, the case study features a rich description of the industry’s many unusual attributes which allows for discussing the benefits...

  11. Copyright of Electronic Publishing.

    Science.gov (United States)

    Dong, Elaine; Wang, Bob

    2002-01-01

    Analyzes the importance of copyright, considers the main causes of copyright infringement in electronic publishing, discusses fair use of a copyrighted work, and suggests methods to safeguard copyrighted electronic publishing, including legislation, contracts, and technology. (Author/LRW)

  12. Elearning and digital publishing

    CERN Document Server

    Ching, Hsianghoo Steve; Mc Naught, Carmel

    2006-01-01

    ""ELearning and Digital Publishing"" will occupy a unique niche in the literature accessed by library and publishing specialists, and by university teachers and planners. It examines the interfaces between the work done by four groups of university staff who have been in the past quite separate from, or only marginally related to, each other - library staff, university teachers, university policy makers, and staff who work in university publishing presses. All four groups are directly and intimately connected with the main functions of universities - the creation, management and dissemination

  13. Supplementary neutron flux calculations for the ORNL pool critical assembly pressure vessel facility

    Energy Technology Data Exchange (ETDEWEB)

    Maerker, R.E.; Maudlin, P.J.

    1981-02-01

    A three-dimensional Monte Carlo calculation was performed to estimate the neutron flux in the 8/7 configuration of the ORNL Pool Critical Assembly Pressure Vessel Facility. The calculational tool was the multigroup transport code MORSE operated in the adjoint mode. The MORSE flux results compared well with those using a previously adopted procedure for constructing a three-dimensional flux from one- and two-dimensional discrete ordinates calculations using the DOT-IV code. This study concluded that use of these discrete ordinates constructions in previous calculations is sufficiently accurate and does not account for the existing discrepancies between calculation and experiment.

  14. Supplementary neutron flux calculations for the ORNL pool critical assembly pressure vessel facility

    International Nuclear Information System (INIS)

    Maerker, R.E.; Maudlin, P.J.

    1981-02-01

    A three-dimensional Monte Carlo calculation was performed to estimate the neutron flux in the 8/7 configuration of the ORNL Pool Critical Assembly Pressure Vessel Facility. The calculational tool was the multigroup transport code MORSE operated in the adjoint mode. The MORSE flux results compared well with those using a previously adopted procedure for constructing a three-dimensional flux from one- and two-dimensional discrete ordinates calculations using the DOT-IV code. This study concluded that use of these discrete ordinates constructions in previous calculations is sufficiently accurate and does not account for the existing discrepancies between calculation and experiment

  15. Books Average Previous Decade of Economic Misery

    Science.gov (United States)

    Bentley, R. Alexander; Acerbi, Alberto; Ormerod, Paul; Lampos, Vasileios

    2014-01-01

    For the 20th century since the Depression, we find a strong correlation between a ‘literary misery index’ derived from English language books and a moving average of the previous decade of the annual U.S. economic misery index, which is the sum of inflation and unemployment rates. We find a peak in the goodness of fit at 11 years for the moving average. The fit between the two misery indices holds when using different techniques to measure the literary misery index, and this fit is significantly better than other possible correlations with different emotion indices. To check the robustness of the results, we also analysed books written in German language and obtained very similar correlations with the German economic misery index. The results suggest that millions of books published every year average the authors' shared economic experiences over the past decade. PMID:24416159

  16. How libraries use publisher metadata

    Directory of Open Access Journals (Sweden)

    Steve Shadle

    2013-11-01

    Full Text Available With the proliferation of electronic publishing, libraries are increasingly relying on publisher-supplied metadata to meet user needs for discovery in library systems. However, many publisher/content provider staff creating metadata are unaware of the end-user environment and how libraries use their metadata. This article provides an overview of the three primary discovery systems that are used by academic libraries, with examples illustrating how publisher-supplied metadata directly feeds into these systems and is used to support end-user discovery and access. Commonly seen metadata problems are discussed, with recommendations suggested. Based on a series of presentations given in Autumn 2012 to the staff of a large publisher, this article uses the University of Washington Libraries systems and services as illustrative examples. Judging by the feedback received from these presentations, publishers (specifically staff not familiar with the big picture of metadata standards work would benefit from a better understanding of the systems and services libraries provide using the data that is created and managed by publishers.

  17. Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1989-01-01

    Describes various stages involved in the applications of electronic media to the publishing industry. Highlights include computer typesetting, or photocomposition; machine-readable databases; the distribution of publications in electronic form; computer conferencing and electronic mail; collaborative authorship; hypertext; hypermedia publications;…

  18. Development of PC based Monte Carlo simulations for the calculation of scanner-specific normalized organ doses from CT

    International Nuclear Information System (INIS)

    Jansen, J. T. M.; Shrimpton, P. C.; Zankl, M.

    2009-01-01

    This paper discusses the simulation of contemporary computed tomography (CT) scanners using Monte Carlo calculation methods to derive normalized organ doses, which enable hospital physicists to estimate typical organ and effective doses for CT examinations. The hardware used in a small PC-cluster at the Health Protection Agency (HPA) for these calculations is described. Investigations concerning optimization of software, including the radiation transport codes MCNP5 and MCNPX, and the Intel and PGI FORTRAN compilers, are presented in relation to results and calculation speed. Differences in approach for modelling the X-ray source are described and their influences are analysed. Comparisons with previously published calculations at HPA from the early 1990's proved satisfactory for the purposes of quality assurance and are presented in terms of organ dose ratios for whole body exposure and differences in organ location. Influences on normalized effective dose are discussed in relation to choice of cross section library, CT scanner technology (contemporary multi slice versus single slice), definition for effective dose (1990 and 2007 versions) and anthropomorphic phantom (mathematical and voxel). The results illustrate the practical need for the updated scanner-specific dose coefficients presently being calculated at HPA, in order to facilitate improved dosimetry for contemporary CT practice. (authors)

  19. International Marketing Developing Publishing Business

    Directory of Open Access Journals (Sweden)

    Eugenijus Chlivickas

    2015-05-01

    Full Text Available Lithuanian integration in the financial Eurozone and Lithuanian publishing business development in the European Union and outside it, becomes an important problem requiring a solution. Promoting the dissemination of printed books and literacy in Lithuania and beyond, to properly introduce the achievements of Lithuania in foreign countries, it is important to ensure Lithuanian letter, educational and scientific book publishing development. The article examines the characteristics of the international marketing publishing, the world and Lithuanian state publishing houses on the basis of foreign and Lithuanian scientists theoretical insights about the instruments of international marketing opportunities, developing proposals for publishing business integration of new economic conditions.

  20. The quality of the reported sample size calculations in randomized controlled trials indexed in PubMed.

    Science.gov (United States)

    Lee, Paul H; Tse, Andy C Y

    2017-05-01

    There are limited data on the quality of reporting of information essential for replication of the calculation as well as the accuracy of the sample size calculation. We examine the current quality of reporting of the sample size calculation in randomized controlled trials (RCTs) published in PubMed and to examine the variation in reporting across study design, study characteristics, and journal impact factor. We also reviewed the targeted sample size reported in trial registries. We reviewed and analyzed all RCTs published in December 2014 with journals indexed in PubMed. The 2014 Impact Factors for the journals were used as proxies for their quality. Of the 451 analyzed papers, 58.1% reported an a priori sample size calculation. Nearly all papers provided the level of significance (97.7%) and desired power (96.6%), and most of the papers reported the minimum clinically important effect size (73.3%). The median (inter-quartile range) of the percentage difference of the reported and calculated sample size calculation was 0.0% (IQR -4.6%;3.0%). The accuracy of the reported sample size was better for studies published in journals that endorsed the CONSORT statement and journals with an impact factor. A total of 98 papers had provided targeted sample size on trial registries and about two-third of these papers (n=62) reported sample size calculation, but only 25 (40.3%) had no discrepancy with the reported number in the trial registries. The reporting of the sample size calculation in RCTs published in PubMed-indexed journals and trial registries were poor. The CONSORT statement should be more widely endorsed. Copyright © 2016 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

  1. Electrons, Electronic Publishing, and Electronic Display.

    Science.gov (United States)

    Brownrigg, Edwin B.; Lynch, Clifford A.

    1985-01-01

    Provides a perspective on electronic publishing by distinguishing between "Newtonian" publishing and "quantum-mechanical" publishing. Highlights include media and publishing, works delivered through electronic media, electronic publishing and the printed word, management of intellectual property, and recent copyright-law issues…

  2. PUBLISHER'S ANNOUNCEMENT: Refereeing standards

    Science.gov (United States)

    Bender, C.; Scriven, N.

    2004-08-01

    On 1 January 2004 I will be assuming the position of Editor-in-Chief of Journal of Physics A: Mathematical and General (J. Phys. A). I am flattered at the confidence expressed in my ability to carry out this challenging job and I will try hard to justify this confidence. The previous Editor-in-Chief, Ed Corrigan, has worked tirelessly for the last five years and has done an excellent job for the journal. Everyone at the journal is profoundly grateful for his leadership and for his achievements. Before accepting the position of Editor-in-Chief, I visited the office of J. Phys. A to examine the organization and to assess its strengths and weaknesses. This office is located at the Institute of Physics Publishing (IOPP) headquarters in Bristol. J. Phys. A has been expanding rapidly and now publishes at the rate of nearly 1000 articles (or about 14,000 pages) per year. The entire operation of the journal is conducted in a very small space---about 15 square metres! Working in this space are six highly intelligent, talented, hard working, and dedicated people: Neil Scriven, Publisher; Mike Williams, Publishing Editor; Rose Gray and Sarah Nadin, Publishing Administrators; Laura Smith and Steve Richards, Production Editors. In this small space every day about eight submitted manuscripts are downloaded from the computer or received in the post. These papers are then processed and catalogued, referees are selected, and the papers are sent out for evaluation. In this small space the referees' reports are received, publication decisions are made, and accepted articles are then published quickly by IOPP. The whole operation is amazingly efficient. Indeed, one of the great strengths of J. Phys. A is the speed at which papers are processed. The average time between the receipt of a manuscript and an editorial decision is under sixty days. (Many distinguished journals take three to five times this amount of time.) This speed of publication is an extremely strong enticement for

  3. Toxoplasma gondii and schizophrenia: a review of published RCTs.

    Science.gov (United States)

    Chorlton, Sam D

    2017-07-01

    Over the last 60 years, accumulating evidence has suggested that acute, chronic, and maternal Toxoplasma gondii infections predispose to schizophrenia. More recent evidence suggests that chronically infected patients with schizophrenia present with more severe disease. After acute infection, parasites form walled cysts in the brain, leading to lifelong chronic infection and drug resistance to commonly used antiparasitics. Chronic infection is the most studied and closely linked with development and severity of schizophrenia. There are currently four published randomized controlled trials evaluating antiparasitic drugs, specifically azithromycin, trimethoprim, artemisinin, and artemether, in patients with schizophrenia. No trials have demonstrated a change in psychopathology with adjunctive treatment. Published trials have either selected drugs without evidence against chronic infection or used them at doses too low to reduce brain cyst burden. Furthermore, trials have failed to achieve sufficient power or account for confounders such as previous antipsychotic treatment, sex, age, or rhesus status on antiparasitic effect. There are currently no ongoing trials of anti-Toxoplasma therapy in schizophrenia despite ample evidence to justify further testing.

  4. Validation of an online risk calculator for the prediction of anastomotic leak after colon cancer surgery and preliminary exploration of artificial intelligence-based analytics.

    Science.gov (United States)

    Sammour, T; Cohen, L; Karunatillake, A I; Lewis, M; Lawrence, M J; Hunter, A; Moore, J W; Thomas, M L

    2017-11-01

    Recently published data support the use of a web-based risk calculator ( www.anastomoticleak.com ) for the prediction of anastomotic leak after colectomy. The aim of this study was to externally validate this calculator on a larger dataset. Consecutive adult patients undergoing elective or emergency colectomy for colon cancer at a single institution over a 9-year period were identified using the Binational Colorectal Cancer Audit database. Patients with a rectosigmoid cancer, an R2 resection, or a diverting ostomy were excluded. The primary outcome was anastomotic leak within 90 days as defined by previously published criteria. Area under receiver operating characteristic curve (AUROC) was derived and compared with that of the American College of Surgeons National Surgical Quality Improvement Program ® (ACS NSQIP) calculator and the colon leakage score (CLS) calculator for left colectomy. Commercially available artificial intelligence-based analytics software was used to further interrogate the prediction algorithm. A total of 626 patients were identified. Four hundred and fifty-six patients met the inclusion criteria, and 402 had complete data available for all the calculator variables (126 had a left colectomy). Laparoscopic surgery was performed in 39.6% and emergency surgery in 14.7%. The anastomotic leak rate was 7.2%, with 31.0% requiring reoperation. The anastomoticleak.com calculator was significantly predictive of leak and performed better than the ACS NSQIP calculator (AUROC 0.73 vs 0.58) and the CLS calculator (AUROC 0.96 vs 0.80) for left colectomy. Artificial intelligence-predictive analysis supported these findings and identified an improved prediction model. The anastomotic leak risk calculator is significantly predictive of anastomotic leak after colon cancer resection. Wider investigation of artificial intelligence-based analytics for risk prediction is warranted.

  5. Molecular calculations with B functions

    International Nuclear Information System (INIS)

    Steinborn, E.O.; Homeier, H.H.H.; Ema, I.; Lopez, R.; Ramirez, G.

    2000-01-01

    A program for molecular calculations with B functions is reported and its performance is analyzed. All the one- and two-center integrals and the three-center nuclear attraction integrals are computed by direct procedures, using previously developed algorithms. The three- and four-center electron repulsion integrals are computed by means of Gaussian expansions of the B functions. A new procedure for obtaining these expansions is also reported. Some results on full molecular calculations are included to show the capabilities of the program and the quality of the B functions to represent the electronic functions in molecules

  6. Dear Publisher.

    Science.gov (United States)

    Chelton, Mary K.

    1992-01-01

    Addresses issues that concern the relationship between publishers and librarians, including differences between libraries and bookstores; necessary information for advertisements; out-of-stock designations and their effect on budgets; the role of distributors and vendors; direct mail for book promotions; unsolicited review copies; communications…

  7. Publisher Correction

    DEFF Research Database (Denmark)

    Stokholm, Jakob; Blaser, Martin J.; Thorsen, Jonathan

    2018-01-01

    The originally published version of this Article contained an incorrect version of Figure 3 that was introduced following peer review and inadvertently not corrected during the production process. Both versions contain the same set of abundance data, but the incorrect version has the children...

  8. EPIC: Electronic Publishing is Cheaper.

    Science.gov (United States)

    Regier, Willis G.

    Advocates of inexpensive publishing confront a widespread complaint that there is already an overproduction of scholarship that electronic publishing will make worse. The costs of electronic publishing correlate to a clutch of choices: speeds of access, breadth and depth of content, visibility, flexibility, durability, dependability, definition of…

  9. Desktop Publishing for Counselors.

    Science.gov (United States)

    Lucking, Robert; Mitchum, Nancy

    1990-01-01

    Discusses the fundamentals of desktop publishing for counselors, including hardware and software systems and peripherals. Notes by using desktop publishing, counselors can produce their own high-quality documents without the expense of commercial printers. Concludes computers present a way of streamlining the communications of a counseling…

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-6798. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1115-2613. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0856-7212. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0378-4738. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0254-2765. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0850-3907. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2141-8322. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0794-7410. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2078-6778. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2305-8862. AJOL African Journals Online.

  20. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-9819. AJOL African Journals Online.

  1. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0379-4350. AJOL African Journals Online.

  2. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2408-8137. AJOL African Journals Online.

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1029-5933. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2467-8252. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0376-4753. AJOL African Journals Online.

  6. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1118-1028. AJOL African Journals Online.

  7. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1597-4292. AJOL African Journals Online.

  8. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0189-9686. AJOL African Journals Online.

  9. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1595-1413. AJOL African Journals Online.

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2078-5151. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1694-0423. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0855-4307. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-9827. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0379-9069. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1998-1279. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1606-7479. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1995-7262. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0856-8960. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0855-5591. AJOL African Journals Online.

  20. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1531-4065. AJOL African Journals Online.

  1. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1110-5607. AJOL African Journals Online.

  2. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2076-7714. AJOL African Journals Online.

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1994-8220. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-6232. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2224-0020. AJOL African Journals Online.

  6. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0556-8641. AJOL African Journals Online.

  7. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1596-5414. AJOL African Journals Online.

  8. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2305-2678. AJOL African Journals Online.

  9. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1119-3077. AJOL African Journals Online.

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1027-4332. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1998-9881. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0376-8902. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2507-7961. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0189-5117. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1012-2796. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2313-1799. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1025-9848. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2141-9884. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1727-3781. AJOL African Journals Online.

  20. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2090-7214. AJOL African Journals Online.

  1. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2410-8936. AJOL African Journals Online.

  2. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0856-0714. AJOL African Journals Online.

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1684-5374. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1998-8125. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1016-0728. AJOL African Journals Online.

  6. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1821-9241. AJOL African Journals Online.

  7. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1607-0011. AJOL African Journals Online.

  8. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. AJOL African Journals Online. HOW TO USE ...

  9. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2591 6831. AJOL African Journals Online.

  10. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1999-7671. AJOL African Journals Online.

  11. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1110-6859. AJOL African Journals Online.

  12. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0794-4721. AJOL African Journals Online.

  13. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2072-6589. AJOL African Journals Online.

  14. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1680-6905. AJOL African Journals Online.

  15. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1821-8148. AJOL African Journals Online.

  16. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0258-252X. AJOL African Journals Online.

  17. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0047-651X. AJOL African Journals Online.

  18. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2360-994X. AJOL African Journals Online.

  19. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1858-554X. AJOL African Journals Online.

  20. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2078-676X. AJOL African Journals Online.

  1. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 1814-232X. AJOL African Journals Online.

  2. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0303-691X. AJOL African Journals Online.

  3. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2449-108X. AJOL African Journals Online.

  4. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 2520–7997. AJOL African Journals Online.

  5. About this Publishing System

    African Journals Online (AJOL)

    This journal uses Open Journal Systems 2.4.3.0, which is open source journal management and publishing software developed, supported, and freely distributed by the Public Knowledge Project under the GNU General Public License. OJS Editorial and Publishing Process. ISSN: 0012-835X. AJOL African Journals Online.

  6. Issues in Science Publishing. What's Hot and What's not?

    Directory of Open Access Journals (Sweden)

    Jaime A. Teixeira da Silva

    2015-06-01

    Full Text Available Science is in crisis: a crisis of trust, and a crisis of values. Yet, this is an opportune moment for scientists to examine the issues that underly science to discover how they may be of use, beyond their laboratory or field experience, to improve the research and publishing landscapes to create an environment that suits their needs more. Traditionally, the science publishing landscape had been controlled by the science, technology and medicine publishers, who have always taunted their peer review systems as being fail-safe. Yet, considerable moss has been gathered by the post-publication peer review (PPPR movement over the past few years, indicating that the voice of the average scientist now carries more weight, and more value, than ever before. Despite this, most scientists are unaware of their potential power of opinion. Especially when it comes to commenting on, and correcting, the already published literature. Commenting by name, or anonymously, is the new PPPR publishing reality. There needs to also be a concomitant movement away from artificial metrics, such as the impact factor, which serve only as ego-boosting parameters, and which distract the wider readership from the weaknesses of the traditional peer review system currently in place. Increasing cases of the abuse of peer review, such as the creation of fake identities, affiliations or e-mail addresses further highlights the need for scientists to be vigilant, without necessairly being vigilantes. The discovery, within a matter of years, that the literature is more corrupted than was previously thought, in some cases caused by clear cases of editorial cronyism, or abuse, has resulted in a need for scientists to exceed their functions as mere scientists to evolve into whistle-blowers. Some ethical guidelines are in place, such as those by COPE, yet what is being increasingly witnessed, is a discrepancy between preached values by select COPE member journals, and the literature that

  7. Scientific Journal Publishing in India: Promoting electronic publishing of scholarly journals in India

    OpenAIRE

    Abraham, Thomas; Minj, Suvarsha

    2007-01-01

    Provides a report about the Scientific Journal Publishing in India (SJPI) Project which promotes electronic publishing of scholarly journals. It covers briefly the objectives, implementation and outcomes of the Project. Open Journal Systems and Open Archives Harvester were used to achieve the goals of the Project.

  8. Stress in nurses: The 100 top-cited papers published in nursing journals.

    Science.gov (United States)

    Martín-Del-Río, Beatriz; Solanes-Puchol, Ángel; Martínez-Zaragoza, Fermín; Benavides-Gil, Gemma

    2018-03-08

    To identify and analyse the 100 most cited papers on stress in nurses published in nursing journals. The number of citations an article receives is an index of its impact on the scientific community. An analysis of the most cited articles on stress in nursing would allow us to identify the most important articles and to obtain information about this area of knowledge. A retrospective bibliometric analysis. In 2016, 111 journals belonging to the "nursing" category were identified in the Science and Social Science Citation Index. A search was performed of the Science Core Collection Website for articles on stress published in these journals. The topic, type of article, publishing journal, countries and institutions of origin and year of publication were extracted from the articles. The impact factor, immediacy index, journal country and publisher and h index were collected from the Institute for Scientific Information. The citation density, citation tendency and Bradford's law were calculated. They identified articles were mostly empirical quantitative studies with a transversal design, published from 1975 - 2011 in 23 journals. They were signed by 233 authors, most of whom are English-speaking from the USA and UK. The core distribution of the publications comprises a single journal, the Journal of Advanced Nursing. The study of stress in nursing has shown increased visibility and recognition each decade. The most recent articles have the highest number of citations, are the highest in rank and have the higher citation densities. © 2018 John Wiley & Sons Ltd.

  9. Publishing: Alternatives and Economics.

    Science.gov (United States)

    Penchansky, Mimi; And Others

    The Library Association of the City University of New York presents an annotated bibliography on the subject of small and alternative publishing. In the first section directories, indexes, catalogs, and reviews are briefly described. Book distributors for small publishers are listed next. The major portion of the bibliography is a listing of books…

  10. The FLUKA atmospheric neutrino flux calculation

    CERN Document Server

    Battistoni, G.; Montaruli, T.; Sala, P.R.

    2003-01-01

    The 3-dimensional (3-D) calculation of the atmospheric neutrino flux by means of the FLUKA Monte Carlo model is here described in all details, starting from the latest data on primary cosmic ray spectra. The importance of a 3-D calculation and of its consequences have been already debated in a previous paper. Here instead the focus is on the absolute flux. We stress the relevant aspects of the hadronic interaction model of FLUKA in the atmospheric neutrino flux calculation. This model is constructed and maintained so to provide a high degree of accuracy in the description of particle production. The accuracy achieved in the comparison with data from accelerators and cross checked with data on particle production in atmosphere certifies the reliability of shower calculation in atmosphere. The results presented here can be already used for analysis by current experiments on atmospheric neutrinos. However they represent an intermediate step towards a final release, since this calculation does not yet include the...

  11. Outcomes of Peripheral Endovascular Interventions Based on Hospital Volume: A Mini Review of Published Literature

    Directory of Open Access Journals (Sweden)

    Samir V Patel

    2016-01-01

    Full Text Available Previous literature showed hospital procedural volume is an independent predictor for outcomes of various cardiac procedures. However, very few studies shown similar results for peripheral endovascular interventions especially peripheral atherectomy. Here we are reviewing previously published articles to provide volume-outcome relationship for peripheral atherectomy and angioplasty with or without endovascular stenting. We found higher hospital volume significantly and independently lowers in-hospital mortality, amputation rates, peri-procedural complications, length and cost of hospitalization for peripheral endovascular interventions.

  12. Do emotional intelligence and previous caring experience influence student nurse performance? A comparative analysis.

    Science.gov (United States)

    Stenhouse, Rosie; Snowden, Austyn; Young, Jenny; Carver, Fiona; Carver, Hannah; Brown, Norrie

    2016-08-01

    Reports of poor nursing care have focused attention on values based selection of candidates onto nursing programmes. Values based selection lacks clarity and valid measures. Previous caring experience might lead to better care. Emotional intelligence (EI) might be associated with performance, is conceptualised and measurable. To examine the impact of 1) previous caring experience, 2) emotional intelligence 3) social connection scores on performance and retention in a cohort of first year nursing and midwifery students in Scotland. A longitudinal, quasi experimental design. Adult and mental health nursing, and midwifery programmes in a Scottish University. Adult, mental health and midwifery students (n=598) completed the Trait Emotional Intelligence Questionnaire-short form and Schutte's Emotional Intelligence Scale on entry to their programmes at a Scottish University, alongside demographic and previous caring experience data. Social connection was calculated from a subset of questions identified within the TEIQue-SF in a prior factor and Rasch analysis. Student performance was calculated as the mean mark across the year. Withdrawal data were gathered. 598 students completed baseline measures. 315 students declared previous caring experience, 277 not. An independent-samples t-test identified that those without previous caring experience scored higher on performance (57.33±11.38) than those with previous caring experience (54.87±11.19), a statistically significant difference of 2.47 (95% CI, 0.54 to 4.38), t(533)=2.52, p=.012. Emotional intelligence scores were not associated with performance. Social connection scores for those withdrawing (mean rank=249) and those remaining (mean rank=304.75) were statistically significantly different, U=15,300, z=-2.61, p$_amp_$lt;0.009. Previous caring experience led to worse performance in this cohort. Emotional intelligence was not a useful indicator of performance. Lower scores on the social connection factor were associated

  13. Two new prediction rules for spontaneous pregnancy leading to live birth among subfertile couples, based on the synthesis of three previous models.

    NARCIS (Netherlands)

    C.C. Hunault; J.D.F. Habbema (Dik); M.J.C. Eijkemans (René); J.A. Collins (John); J.L.H. Evers (Johannes); E.R. te Velde (Egbert)

    2004-01-01

    textabstractBACKGROUND: Several models have been published for the prediction of spontaneous pregnancy among subfertile patients. The aim of this study was to broaden the empirical basis for these predictions by making a synthesis of three previously published models. METHODS:

  14. Publishing integrity and good practices in editing in biomedicine.

    Science.gov (United States)

    Polenakovic, Momir; Gucev, Zoran

    2014-01-01

    accept reports which support the reviewer's concepts of thinking and, like Procrustes, cutting everything else out. Authorship is often a contentious issue, as undeserved authors appear on the list of authors. Some principles are now a norm in academic publishing. This applies to the declaration of a conflict of interest, the consent of the patient and the approval of the Ethical Board of the institution. This global informational technological revolution has, unfortunately, led to largely widespread and increasingly sophisticated deviations: plagiarism, data fabrication and data falsification as forms of scientific misconduct. Those events are now more widespread than in the past. Luckily new tools to track them are much better than previously. The race for perfect publishing integrity and for the best good practices in editing in biomedicine is on. New and old challenges will be met. The benevolent and caring society, educated professionals and an enlightened public remain essential preconditions. The wealth of nations depends on R&D and consequently on academic publishing.

  15. Publisher Correction

    DEFF Research Database (Denmark)

    Turcot, Valérie; Lu, Yingchang; Highland, Heather M

    2018-01-01

    In the version of this article originally published, one of the two authors with the name Wei Zhao was omitted from the author list and the affiliations for both authors were assigned to the single Wei Zhao in the author list. In addition, the ORCID for Wei Zhao (Department of Biostatistics and E...

  16. The handbook of journal publishing

    CERN Document Server

    Morris, Sally; LaFrenier, Douglas; Reich, Margaret

    2013-01-01

    The Handbook of Journal Publishing is a comprehensive reference work written by experienced professionals, covering all aspects of journal publishing, both online and in print. Journals are crucial to scholarly communication, but changes in recent years in the way journals are produced, financed, and used make this an especially turbulent and challenging time for journal publishers - and for authors, readers, and librarians. The Handbook offers a thorough guide to the journal publishing process, from editing and production through marketing, sales, and fulfilment, with chapters on management, finances, metrics, copyright, and ethical issues. It provides a wealth of practical tools, including checklists, sample documents, worked examples, alternative scenarios, and extensive lists of resources, which readers can use in their day-to-day work. Between them, the authors have been involved in every aspect of journal publishing over several decades and bring to the text their experience working for a wide range of ...

  17. Iterative User Interface Design for Automated Sequential Organ Failure Assessment Score Calculator in Sepsis Detection.

    Science.gov (United States)

    Aakre, Christopher Ansel; Kitson, Jaben E; Li, Man; Herasevich, Vitaly

    2017-05-18

    The new sepsis definition has increased the need for frequent sequential organ failure assessment (SOFA) score recalculation and the clerical burden of information retrieval makes this score ideal for automated calculation. The aim of this study was to (1) estimate the clerical workload of manual SOFA score calculation through a time-motion analysis and (2) describe a user-centered design process for an electronic medical record (EMR) integrated, automated SOFA score calculator with subsequent usability evaluation study. First, we performed a time-motion analysis by recording time-to-task-completion for the manual calculation of 35 baseline and 35 current SOFA scores by 14 internal medicine residents over a 2-month period. Next, we used an agile development process to create a user interface for a previously developed automated SOFA score calculator. The final user interface usability was evaluated by clinician end users with the Computer Systems Usability Questionnaire. The overall mean (standard deviation, SD) time-to-complete manual SOFA score calculation time was 61.6 s (33). Among the 24% (12/50) usability survey respondents, our user-centered user interface design process resulted in >75% favorability of survey items in the domains of system usability, information quality, and interface quality. Early stakeholder engagement in our agile design process resulted in a user interface for an automated SOFA score calculator that reduced clinician workload and met clinicians' needs at the point of care. Emerging interoperable platforms may facilitate dissemination of similarly useful clinical score calculators and decision support algorithms as "apps." A user-centered design process and usability evaluation should be considered during creation of these tools. ©Christopher Ansel Aakre, Jaben E Kitson, Man Li, Vitaly Herasevich. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 18.05.2017.

  18. How to successfully publish interdisciplinary research: learning from an Ecology and Society Special Feature

    Directory of Open Access Journals (Sweden)

    Christian Pohl

    2015-06-01

    Full Text Available What are the factors that hinder or support publishing interdisciplinary research? What does a successful interdisciplinary publishing process look like? We address these questions by analyzing the publishing process of the interdisciplinary research project titled "Mountland." Project researchers published most of their main results as a Special Feature of Ecology and Society. Using the story wall method and qualitative content analysis, we identified ten factors contributing to the success or failure of publishing interdisciplinary research. They can be assigned to four groups of resources: scientific resources, i.e., previous joint research, simultaneously written manuscripts; human resources, i.e., coordination, flexibility, composition of the team; integrative resources, i.e., vision of integration, chronology of results; and feedback resources, i.e., internal reviews, subject editors, external reviewers. According to this analysis, an ideal-typical publishing process necessitates, among other things, (1 a strong, interdisciplinary coordinator, (2 a clear shared vision of integration and a common framework, (3 flexibility in terms of money and time, (4 a certain sense of timing regarding when and how to exchange results and knowledge, (5 subject editors who are familiar with the specific project and its interdisciplinary merits, and (6 reviewers who are open minded about interdisciplinary efforts.

  19. Structured P2P overlay of mobile brokers for realizing publish/subscribe communication in VANET.

    Science.gov (United States)

    Pandey, Tulika; Garg, Deepak; Gore, Manoj Madhava

    2014-01-01

    Publish/subscribe communication paradigm provides asynchrony and decoupling, making it an elegant alternative for designing applications in distributed and dynamic environment such as vehicular ad hoc networks (VANETs). In this paradigm, the broker is the most important component that decouples other two components, namely, publisher and subscriber. Previous research efforts have either utilized the deployment of distributed brokers on stationary road side info-stations or have assigned the role of broker to any moving vehicle on ad hoc basis. In one approach, lots of preinstalled infrastructures are needed whereas, in another, the quality of service is not guaranteed due to unpredictable moving and stopping patterns of vehicles. In this paper, we present the architecture of distributed mobile brokers which are dynamically reconfigurable in the form of structured P2P overlay and act as rendezvous points for matching publications and subscriptions. We have taken city buses in urban settings to act as mobile brokers whereas other vehicles are considered to be in role of publishers and subscribers. These mobile brokers also assist in locating a vehicle for successful and timely transfer of notifications. We have performed an extensive simulation study to compare our approach with previously proposed approaches. Simulation results establish the applicability of our approach.

  20. Structured P2P Overlay of Mobile Brokers for Realizing Publish/Subscribe Communication in VANET

    Directory of Open Access Journals (Sweden)

    Tulika Pandey

    2014-01-01

    Full Text Available Publish/subscribe communication paradigm provides asynchrony and decoupling, making it an elegant alternative for designing applications in distributed and dynamic environment such as vehicular ad hoc networks (VANETs. In this paradigm, the broker is the most important component that decouples other two components, namely, publisher and subscriber. Previous research efforts have either utilized the deployment of distributed brokers on stationary road side info-stations or have assigned the role of broker to any moving vehicle on ad hoc basis. In one approach, lots of preinstalled infrastructures are needed whereas, in another, the quality of service is not guaranteed due to unpredictable moving and stopping patterns of vehicles. In this paper, we present the architecture of distributed mobile brokers which are dynamically reconfigurable in the form of structured P2P overlay and act as rendezvous points for matching publications and subscriptions. We have taken city buses in urban settings to act as mobile brokers whereas other vehicles are considered to be in role of publishers and subscribers. These mobile brokers also assist in locating a vehicle for successful and timely transfer of notifications. We have performed an extensive simulation study to compare our approach with previously proposed approaches. Simulation results establish the applicability of our approach.

  1. Calculation of the superconducting transition temperature in niobium

    International Nuclear Information System (INIS)

    Perlov, C.M.

    1982-01-01

    The author presents calculations of the superconducting transition temperature, T/sub c/, the electron-phonon coupling constant, lambda, and the spectral function, α 2 f(ω), for niobium. The author's calculations are based on an empirical pseudopotential method (EPM) band structure. Phonon linewidths are also given for longitudinal and transverse branches along different directions. The necessary electron-phonon matrix elements are evaluated using only the rigid-ion approximation by applying Green's theorem. The calculated value of T/sub c/ is 8.4 K which differs from the measured value by only 9%; the calculated lambda is 1.02. The spectral function and linewidths are compared to experimental and previous theoretical results

  2. The Community Publishing Project: assisting writers to self-publish ...

    African Journals Online (AJOL)

    This article examines the need for a small project such as the Community Publishing Project in South Africa and explores its aims. The method of involving writers and community groups in the publication process is described and two completed projects are evaluated. Lessons learnt by the Centre for the Book in managing ...

  3. Academic Publishing: Making the Implicit Explicit

    Directory of Open Access Journals (Sweden)

    Cecile Badenhorst

    2016-07-01

    Full Text Available For doctoral students, publishing in peer-reviewed journals is a task many face with anxiety and trepidation. The world of publishing, from choosing a journal, negotiating with editors and navigating reviewers’ responses is a bewildering place. Looking in from the outside, it seems that successful and productive academic writers have knowledge that is inaccessible to novice scholars. While there is a growing literature on writing for scholarly publication, many of these publications promote writing and publishing as a straightforward activity that anyone can achieve if they follow the rules. We argue that the specific and situated contexts in which academic writers negotiate publishing practices is more complicated and messy. In this paper, we attempt to make explicit our publishing processes to highlight the complex nature of publishing. We use autoethnographic narratives to provide discussion points and insights into the challenges of publishing peer reviewed articles. One narrative is by a doctoral student at the beginning of her publishing career, who expresses her desires, concerns and anxieties about writing for publication. The other narrative focuses on the publishing practices of a more experienced academic writer. Both are international scholars working in the Canadian context. The purpose of this paper is to explore academic publishing through the juxtaposition of these two narratives to make explicit some of the more implicit processes. Four themes emerge from these narratives. To publish successfully, academic writers need: (1 to be discourse analysts; (2 to have a critical competence; (3 to have writing fluency; and (4 to be emotionally intelligent.

  4. THE TYPES OF PUBLISHING SLOGANS

    Directory of Open Access Journals (Sweden)

    Ryzhov Konstantin Germanovich

    2015-03-01

    Full Text Available The author of the article focuses his attention on publishing slogans which are posted on 100 present-day Russian publishing houses' official websites and have not yet been studied in the special literature. The author has developed his own classification of publishing slogans based on the results of analysis and considering the current scientific views on the classification of slogans. The examined items are classified into autonomous and text-dependent according to interrelationship with an advertising text; marketable, corporative and mixed according to a presentation subject; rational, emotional and complex depending on the method of influence upon a recipient; slogan-presentation, slogan-assurance, slogan-identifier, slogan-appraisal, slogan-appeal depending on the communicative strategy; slogans consisting of one sentence and of two or more sentences; Russian and foreign ones. The analysis of the slogans of all kinds presented in the actual material allowed the author to determine the dominant features of the Russian publishing slogan which is an autonomous sentence in relation to the advertising text. In spite of that, the slogan shows the publishing output, influences the recipient emotionally, actualizes the communicative strategy of publishing house presentation of its distinguishing features, gives assurance to the target audience and distinguishes the advertised subject among competitors.

  5. Self-Published Books: An Empirical "Snapshot"

    Science.gov (United States)

    Bradley, Jana; Fulton, Bruce; Helm, Marlene

    2012-01-01

    The number of books published by authors using fee-based publication services, such as Lulu and AuthorHouse, is overtaking the number of books published by mainstream publishers, according to Bowker's 2009 annual data. Little empirical research exists on self-published books. This article presents the results of an investigation of a random sample…

  6. QlikView Server and Publisher

    CERN Document Server

    Redmond, Stephen

    2014-01-01

    This is a comprehensive guide with a step-by-step approach that enables you to host and manage servers using QlikView Server and QlikView Publisher.If you are a server administrator wanting to learn about how to deploy QlikView Server for server management,analysis and testing, and QlikView Publisher for publishing of business content then this is the perfect book for you. No prior experience with QlikView is expected.

  7. Probability calculations for three-part mineral resource assessments

    Science.gov (United States)

    Ellefsen, Karl J.

    2017-06-27

    Three-part mineral resource assessment is a methodology for predicting, in a specified geographic region, both the number of undiscovered mineral deposits and the amount of mineral resources in those deposits. These predictions are based on probability calculations that are performed with computer software that is newly implemented. Compared to the previous implementation, the new implementation includes new features for the probability calculations themselves and for checks of those calculations. The development of the new implementation lead to a new understanding of the probability calculations, namely the assumptions inherent in the probability calculations. Several assumptions strongly affect the mineral resource predictions, so it is crucial that they are checked during an assessment. The evaluation of the new implementation leads to new findings about the probability calculations,namely findings regarding the precision of the computations,the computation time, and the sensitivity of the calculation results to the input.

  8. Peer-review: An IOP Publishing Perspective

    Science.gov (United States)

    Smith, Timothy

    2015-03-01

    Online publishing is challenging, and potentially changing, the role of publishers in both managing the peer-review process and disseminating the work that they publish in meeting contrasting needs from diverse groups of research communities. Recognizing the value of peer-review as a fundamental service to authors and the research community, the underlying principles of managing the process for journals published by IOP Publishing remain unchanged and yet the potential and demand for alternative models exists. This talk will discuss the traditional approach to peer-review placed in the context of this changing demand.

  9. Long working hours and depressive symptoms: systematic review and meta-analysis of published studies and unpublished individual participant data

    OpenAIRE

    Virtanen, M.; Jokela, M.; Madsen, I. E.; Magnusson Hanson, L. L.; Lallukka, T.; Nyberg, S. T.; Alfredsson, L.; Batty, D.; Bjorner, J. B.; Borritz, M.; Burr, H.; Dragano, N.; Erbel, R.; Ferrie, J. E.; Heikkilä, K.

    2018-01-01

    Objectives This systematic review and meta-analysis combined published study-level data and unpublished individual-participant data with the aim of quantifying the relation between long working hours and the onset of depressive symptoms. Methods We searched PubMed and Embase for published prospective cohort studies and included available cohorts with unpublished individual-participant data. We used a random-effects meta-analysis to calculate summary estimates across studies. Results We identi...

  10. Reporting of various methodological and statistical parameters in negative studies published in prominent Indian Medical Journals: a systematic review.

    Science.gov (United States)

    Charan, J; Saxena, D

    2014-01-01

    Biased negative studies not only reflect poor research effort but also have an impact on 'patient care' as they prevent further research with similar objectives, leading to potential research areas remaining unexplored. Hence, published 'negative studies' should be methodologically strong. All parameters that may help a reader to judge validity of results and conclusions should be reported in published negative studies. There is a paucity of data on reporting of statistical and methodological parameters in negative studies published in Indian Medical Journals. The present systematic review was designed with an aim to critically evaluate negative studies published in prominent Indian Medical Journals for reporting of statistical and methodological parameters. Systematic review. All negative studies published in 15 Science Citation Indexed (SCI) medical journals published from India were included in present study. Investigators involved in the study evaluated all negative studies for the reporting of various parameters. Primary endpoints were reporting of "power" and "confidence interval." Power was reported in 11.8% studies. Confidence interval was reported in 15.7% studies. Majority of parameters like sample size calculation (13.2%), type of sampling method (50.8%), name of statistical tests (49.1%), adjustment of multiple endpoints (1%), post hoc power calculation (2.1%) were reported poorly. Frequency of reporting was more in clinical trials as compared to other study designs and in journals having impact factor more than 1 as compared to journals having impact factor less than 1. Negative studies published in prominent Indian medical journals do not report statistical and methodological parameters adequately and this may create problems in the critical appraisal of findings reported in these journals by its readers.

  11. Effective action calculation in lattice QCD

    International Nuclear Information System (INIS)

    Hoek, J.

    1983-01-01

    A method (called the effective action method) devised to make analytic calculations in Quantum Chromodynamics in the region of strong coupling is presented. First, the author deals with developing the calculation of a strong coupling expansion of the generating functional for gauge systems on a lattice with arbitrary sources. An accompanying manual describes the implementation of this calculation on a computer. The next step consists of substituting the expressions for the one-link free energies for a specific gauge group in the result of the previous calculation. This process of substitution, together with the replacement of the sources by a bilinear combination of fermion fields, is described for the group SU(3). More details on the implementation of the substitution scheme on a computer can be found in the accompanying manual. From the effective action thus obtained in terms of meson fields and baryon fields the Green functions of the theory can be derived. As an illustrative application the effective potential determining the vacuum expectation value of the meson field is calculated. (Auth.)

  12. Acceleration methods for assembly-level transport calculations

    International Nuclear Information System (INIS)

    Adams, Marvin L.; Ramone, Gilles

    1995-01-01

    A family acceleration methods for the iterations that arise in assembly-level transport calculations is presented. A single iteration in these schemes consists of a transport sweep followed by a low-order calculation which is itself a simplified transport problem. It is shown that a previously-proposed method fitting this description is unstable in two and three dimensions. It is presented a family of methods and shown that some members are unconditionally stable. (author). 8 refs, 4 figs, 4 tabs

  13. Perception of Key Barriers in Using and Publishing Open Data

    Directory of Open Access Journals (Sweden)

    Martin Beno

    2017-12-01

    Full Text Available TThere is a growing body of literature recognizing the benefits of Open Data. However, many potential data providers are unwilling to publish their data and at the same time, data users are often faced with difficulties when attempting to use Open Data in practice. Despite various barriers in using and publishing Open Data still being present, studies which systematically collect and assess these barriers are rare. Based on this observation we present a review on prior literature on barriers and the results of an empirical study aimed at assessing both the users’ and publishers’ views on obstacles regarding Open Data adoption. We collected data with an online survey in Austria and internationally. Using a sample of 183 participants, we draw conclusions about the relative importance of the barriers reported in the literature. In comparison to a previous conference paper presented at the conference for E-Democracy and Open Government, this article includes new additional data from participants outside Austria, reports new analyses, and substantially extends the discussion of results and of possible strategies for the mitigation of Open Data barriers.

  14. Self-consistent DFT +U method for real-space time-dependent density functional theory calculations

    Science.gov (United States)

    Tancogne-Dejean, Nicolas; Oliveira, Micael J. T.; Rubio, Angel

    2017-12-01

    We implemented various DFT+U schemes, including the Agapito, Curtarolo, and Buongiorno Nardelli functional (ACBN0) self-consistent density-functional version of the DFT +U method [Phys. Rev. X 5, 011006 (2015), 10.1103/PhysRevX.5.011006] within the massively parallel real-space time-dependent density functional theory (TDDFT) code octopus. We further extended the method to the case of the calculation of response functions with real-time TDDFT+U and to the description of noncollinear spin systems. The implementation is tested by investigating the ground-state and optical properties of various transition-metal oxides, bulk topological insulators, and molecules. Our results are found to be in good agreement with previously published results for both the electronic band structure and structural properties. The self-consistent calculated values of U and J are also in good agreement with the values commonly used in the literature. We found that the time-dependent extension of the self-consistent DFT+U method yields improved optical properties when compared to the empirical TDDFT+U scheme. This work thus opens a different theoretical framework to address the nonequilibrium properties of correlated systems.

  15. GTHTR 300 economic calculation with Mini G4ECONS as a basis for generation cost of GTHTR 10 MWe calculation

    International Nuclear Information System (INIS)

    Mochamad Nasrullah; Nurlaila

    2014-01-01

    The government plan to build Experimental Power Reactor (EPR) requires measurable economic assessment. The purpose of the study was to recalculate Gas Turbine High Temperature Reactor of 300 MWe (GTHTR 300) and compare the results with reference data. Then calculate generation cost of GTHTR 3, 5 and 10 MWe using the scale factor calculation. The methodology used is covered the generation cost calculation using the Mini G4Econs spread sheet models published by IAEA. Result of the verification calculation showed that a relatively similar, which means that the calculation model could be used to calculate for same other cases. Afterward, using scale factor, smaller scale reactor could be calculated. The calculation result show that electricity generation cost of SMR-HTR type with load factor 90% and discount rate 10% for power capacity 3, 5 and 10 MWe are 29.5, 22.68 and 16.17 cents$/kWh respectively. However, because the EPR is planning to be built as a non-commercial power reactors, then 5 % and 3 % of discount rate could be chosen, each of those discount rate will result electricity generation cost of 10.37 cents$/kWh and 8.56 cents$/kWh respectively. These result could be considered by the government for developing SMR type of HTR. (author)

  16. Methodological Quality of Systematic Reviews Published in the Urological Literature from 1998 to 2012.

    Science.gov (United States)

    Corbyons, Katherine; Han, Julia; Neuberger, Molly M; Dahm, Philipp

    2015-11-01

    Systematic reviews synthesize the current best evidence to address a clinical question. Given the growing emphasis on evidence-based clinical practice, systematic reviews are being increasingly sought after and published. We previously reported limitations in the methodological quality of 57 individual systematic reviews published from 1998 to 2008. We provide an update to our previous study, adding systematic reviews published from 2009 to 2012. We systematically searched PubMed® and hand searched the table of contents of 4 major urological journals to identify systematic reviews related to questions of prevention and therapy. Two independent reviewers with prior formal evidence-based medicine training assessed the methodological quality using the validated 11-point AMSTAR (A Measurement Tool to Assess Systematic Reviews) instrument. We performed predefined statistical hypothesis testing for differences by publication period (1998 to 2008 vs 2009 to 2012) and journal of publication. We performed statistical testing using SPSS®, version 23.0 with a 2-sided α of 0.05 using the Student t-test, ANOVA and the chi-square test. A total of 113 systematic reviews published from 2009 to 2012 met study inclusion criteria. The most common topics were oncology (44 reviews or 38.9%), voiding dysfunction (26 or 23.0%) and stones/endourology (13 or 11.5%). The largest contributor was European Urology (46 reviews or 40.7%), followed by BJU International (31 or 27.4%) and The Journal of Urology® (22 or 19.5%). The mean ± SD AMSTAR score for the 2009 to 2012 period was 5.3 ± 2.3 compared to 4.8 ± 2.0 for 1998 to 2008 with a mean difference of 0.5 (95% CI 0.2 to 1.2, p = 0.133). While the number of systematic reviews published in the urological literature has increased substantially, the methodological quality of these studies remains suboptimal. Systematic review authors and editors should make every effort to adhere to well established methodological standards to enhance

  17. Experimental and calculational works on characteristics of the Dalat Nuclear Research Reactor. Second edition

    International Nuclear Information System (INIS)

    Pham Ngoc Khoi; Nguyen Kim Dung

    2016-03-01

    Recognizing the significant value and necessity of publishing the scientific document of experimental and calculational works on the Dalat Nuclear Research Reactor (DNRR) physics and engineering for research, operation, training activities as well as for international scientific exchange, Vietnam Atomic Energy Agency (VAEA) and Vietnam Atomic Energy Institute have completed editing to publish the “Experimental and Calculational Works on Characteristics of THE DALAT NUCLEAR RESEARCH REACTOR” which consists of 26 typical papers representing the most important experimental and calculational results of the DNRR physics and engineering obtained during 30 years of operation and exploitation with the contribution of Vietnamese and former USSR’s experts, especially scientists and engineers working at the Reactor Center of the NRI

  18. From protocol to published report

    DEFF Research Database (Denmark)

    Berendt, Louise; Callréus, Torbjörn; Petersen, Lene Grejs

    2016-01-01

    and published reports of academic clinical drug trials. METHODS: A comparison was made between study protocols and their corresponding published reports. We assessed the overall consistency, which was defined as the absence of discrepancy regarding study type (categorized as either exploratory or confirmatory...... in 1999, 2001, and 2003, 95 of which fulfilled the eligibility criteria and had at least one corresponding published report reporting data on trial subjects. Overall consistency was observed in 39% of the trials (95% CI: 29 to 49%). Randomized controlled trials (RCTs) constituted 72% (95% CI: 63 to 81......%) of the sample, and 87% (95% CI: 80 to 94%) of the trials were hospital based. CONCLUSIONS: Overall consistency between protocols and their corresponding published reports was low. Motivators for the inconsistencies are unknown but do not seem restricted to economic incentives....

  19. Types of Open Access Publishers in Scopus

    Directory of Open Access Journals (Sweden)

    David Solomon

    2013-05-01

    Full Text Available This study assessed characteristics of publishers who published 2010 open access (OA journals indexed in Scopus. Publishers were categorized into six types; professional, society, university, scholar/researcher, government, and other organizations. Type of publisher was broken down by number of journals/articles published in 2010, funding model, location, discipline and whether the journal was born or converted to OA. Universities and societies accounted for 50% of the journals and 43% of the articles published. Professional publisher accounted for a third of the journals and 42% of the articles. With the exception of professional and scholar/researcher publishers, most journals were originally subscription journals that made at least their digital version freely available. Arts, humanities and social science journals are largely published by societies and universities outside the major publishing countries. Professional OA publishing is most common in biomedicine, mathematics, the sciences and engineering. Approximately a quarter of the journals are hosted on national/international platforms, in Latin America, Eastern Europe and Asia largely published by universities and societies without the need for publishing fees. This type of collaboration between governments, universities and/or societies may be an effective means of expanding open access publications.

  20. Calculations of polarizabilities and hyperpolarizabilities for the Be+ ion

    International Nuclear Information System (INIS)

    Tang Liyan; Zhang Junyi; Mitroy, J.; Yan Zongchao; Shi Tingyun; Babb, James F.

    2009-01-01

    The polarizabilities and hyperpolarizabilities of the Be + ion in the 2 2 S state and the 2 2 P state are determined. Calculations are performed using two independent methods: (i) variationally determined wave functions using Hylleraas basis set expansions and (ii) single electron calculations utilizing a frozen-core Hamiltonian. The first few parameters in the long-range interaction potential between a Be + ion and a H, He, or Li atom, and the leading parameters of the effective potential for the high-L Rydberg states of beryllium were also computed. All the values reported are the results of calculations close to convergence. Comparisons are made with published results where available.

  1. Thermodynamic Calculations of Hydrogen-Oxygen Detonation Parameters for Various Initial Pressures

    Science.gov (United States)

    Bollinger, Loren E.; Edse, Rudolph

    1961-01-01

    Composition, temperature, pressure and density behind a stable detonation wave and its propagation rate have been calculated for seven hydrogen-oxygen mixture at 1, 5, 25 and 100 atm initial pressure, and at an initial temperature of 40C. For stoichiometric mixtures that calculations also include an initial temperature of 200C. According to these calculations the detonation velocities of hydrogen-oxygen mixtures increase with increasing initial pressure, but decrease slightly when the initial temperature is raised from 40 to 200 C. The calculated detonation velocities agree satisfactorily with values determined experimentally. These values will be published in the near future.

  2. Choosing the Right Desktop Publisher.

    Science.gov (United States)

    Eiser, Leslie

    1988-01-01

    Investigates the many different desktop publishing packages available today. Lists the steps to desktop publishing. Suggests which package to use with specific hardware available. Compares several packages for IBM, Mac, and Apple II based systems. (MVL)

  3. Calculation of Gilbert damping in ferromagnetic films

    Directory of Open Access Journals (Sweden)

    Edwards D. M.

    2013-01-01

    Full Text Available The Gilbert damping constant in the phenomenological Landau-Lifshitz-Gilbert equation which describes the dynamics of magnetization, is calculated for Fe, Co and Ni bulk ferromagnets, Co films and Co/Pd bilayers within a nine-band tight-binding model with spin-orbit coupling included. The calculational effciency is remarkably improved by introducing finite temperature into the electronic occupation factors and subsequent summation over the Matsubara frequencies. The calculated dependence of Gilbert damping constant on scattering rate for bulk Fe, Co and Ni is in good agreement with the results of previous ab initio calculations. Calculations are reported for ferromagnetic Co metallic films and Co/Pd bilayers. The dependence of the Gilbert damping constant on Co film thickness, for various scattering rates, is studied and compared with recent experiments.

  4. Verification of ANISN-F by calculating the neutron distribution from a Ra-Be source in water as well as by simple criticality calculations

    International Nuclear Information System (INIS)

    Etemad, M.A.

    1981-04-01

    The one dimensional discrete ordinates code ANISN-F was used to calculate the thermal neutron flux distribution in water from a Ra-Be neutron source. The calculations were performed in order to investigate the different possibilities of the code as well as to verify the results of the calculations in terms of comparisons to corresponding experimental data. Two different group cross section libraries were used in the calculations and conclusions were drawn on the adequacy of these libraries for a fixed source type calculation. Furthermore, critically calculations were performed for an infinite homogeneous slab of multiplying material using different angular and spatial approximations. The results of these calculations were then compared to the corresponding results previously obtained at this department by a different method and a different code. (author)

  5. Publishing for Learned Societies: The Secret Life of a Scholarly Publisher

    Science.gov (United States)

    Nicholson, David

    Wiley-Blackwell was formed in February 2007 as a result of the acquisition of Blackwell Publishing Ltd. by John Wiley & Sons, Inc. and the merger between Blackwell and Wiley's Scientific, Technical, and Medical business. Wiley-Blackwell publishes approximately 1,250 scholarly peer-reviewed journals including Monthly Notices of the Royal Astronomical Society and Astronomische Nachrichten, and has relationships with over 800 learned societies. The "secret life" of the article's title refers to the two broad areas of activity we undertake for our society partners, namely practical assistance and strategic advice. One of our goals at Wiley-Blackwell is to set the standard for both areas, and this article illustrates how we are doing this with a series of tangible examples.

  6. Accurate quantum calculations of the reaction rates for H/D+ CH4

    NARCIS (Netherlands)

    Harrevelt, R. van; Nyman, G.; Manthe, U.

    2007-01-01

    In previous work [T. Wu, H. J. Werner, and U. Manthe, Science 306, 2227 (2004)], accurate quantum reaction rate calculations of the rate constant for the H+CH4 -> CH3+H-2 reaction have been presented. Both the electronic structure calculations and the nuclear dynamics calculations are converged with

  7. The Changing Business of Scholarly Publishing.

    Science.gov (United States)

    Hunter, Karen

    1993-01-01

    Discussion of changes and trends in scholarly publishing highlights monographs; journals; user-centered publishing; electronic products and services, including adding value, marketing strategies, and new pricing systems; changing attitudes regarding copyright; trends in publishing industry reorganization; and impacts on research libraries. (LRW)

  8. Publishing in Open Access Journals

    International Development Research Centre (IDRC) Digital Library (Canada)

    mbrunet

    00054.x). • An ISSN (International Standard Serial Number e.g. 1234-5678) has ... Publisher uses direct and unsolicited marketing (i.e., spamming) or advertising is obtrusive (to publish articles or serve on editorial board). • No information is ...

  9. Electronic Publishing: Baseline Data 1993.

    Science.gov (United States)

    Brock, Laurie

    1993-01-01

    Provides highlights of a report describing research conducted to analyze and compare publishers' and developers' current and planned involvement in electronic publishing. Topics include acceptance of new media, licensing issues, costs and other perceived obstacles, and CD-ROMs platforms. (EAM)

  10. The Book Publishing Industry

    OpenAIRE

    Jean-Paul Simon; Giuditta de Prato

    2012-01-01

    This report offers an in-depth analysis of the major economic developments in the book publishing industry. The analysis integrates data from a statistical report published earlier as part of this project. The report is divided into 4 main parts. Chapter 1, the introduction, puts the sector into an historical perspective. Chapter 2 introduces the markets at a global and regional level; describes some of the major EU markets (France, Germany, Italy, Spain and the United Kingdom). Chapter 3 ana...

  11. Improved loss calculations for the HDM magnets

    International Nuclear Information System (INIS)

    Mallick, G.T. Jr.; Carr, W.J.; Krefta, M.P.; Johnson, D.

    1994-01-01

    Losses due to ramped fields and currents, quite adequate for the initial design, were calculated previously by Snitchler, Jayakumar, Kovachev, and Orrell for the high energy booster magnets to be used in the SSC. The present analysis considers the loss problem in more detail

  12. Ethics in Scientific Publishing

    Science.gov (United States)

    Sage, Leslie J.

    2012-08-01

    We all learn in elementary school not turn in other people's writing as if it were our own (plagiarism), and in high school science labs not to fake our data. But there are many other practices in scientific publishing that are depressingly common and almost as unethical. At about the 20 percent level authors are deliberately hiding recent work -- by themselves as well as by others -- so as to enhance the apparent novelty of their most recent paper. Some people lie about the dates the data were obtained, to cover up conflicts of interest, or inappropriate use of privileged information. Others will publish the same conference proceeding in multiple volumes, or publish the same result in multiple journals with only trivial additions of data or analysis (self-plagiarism). These shady practices should be roundly condemned and stopped. I will discuss these and other unethical actions I have seen over the years, and steps editors are taking to stop them.

  13. New developments in multireference and complete configuration interaction calculations

    International Nuclear Information System (INIS)

    Knowles, P.J.; Werner, H.J.

    1987-01-01

    Some recently developed techniques for the calculation of Hamiltonian matrix elements in molecular electronic structure calculations are described. These techniques allow the very rapid calculation, in any desired order, of one particle coupling coefficients between spin symmetry adapted basis functions of arbitrary structure. The matrix elements that are required, for either internally contracted multireference CI calculations, or full CI calculations, are then obtainable from suitable summations over resolutions of the identity, which has been shown previously to be rather efficient; this is especially true on vector computers, since all arithmetic can be formulated as matrix multiplications. These ideas have culminated in the preparation of a new multireference CI program which is capable of handling very large numbers of reference configurations. Application of the new techniques to full CI calculations are also presented

  14. The Calculator of Anti-Alzheimer’s Diet. Macronutrients

    Science.gov (United States)

    Studnicki, Marcin; Woźniak, Grażyna; Stępkowski, Dariusz

    2016-01-01

    The opinions about optimal proportions of macronutrients in a healthy diet have changed significantly over the last century. At the same time nutritional sciences failed to provide strong evidence backing up any of the variety of views on macronutrient proportions. Herein we present an idea how these proportions can be calculated to find an optimal balance of macronutrients with respect to prevention of Alzheimer’s Disease (AD) and dementia. These calculations are based on our published observation that per capita personal income (PCPI) in the USA correlates with age-adjusted death rates for AD (AADR). We have previously reported that PCPI through the period 1925–2005 correlated with AADR in 2005 in a remarkable, statistically significant oscillatory manner, as shown by changes in the correlation coefficient R (Roriginal). A question thus arises what caused the oscillatory behavior of Roriginal? What historical events in the life of 2005 AD victims had shaped their future with AD? Looking for the answers we found that, considering changes in the per capita availability of macronutrients in the USA in the period 1929–2005, we can mathematically explain the variability of Roriginal for each quarter of a human life. On the basis of multiple regression of Roriginal with regard to the availability of three macronutrients: carbohydrates, total fat, and protein, with or without alcohol, we propose seven equations (referred to as “the calculator” throughout the text) which allow calculating optimal changes in the proportions of macronutrients to reduce the risk of AD for each age group: youth, early middle age, late middle age and late age. The results obtained with the use of “the calculator” are grouped in a table (Table 4) of macronutrient proportions optimal for reducing the risk of AD in each age group through minimizing Rpredicted−i.e., minimizing the strength of correlation between PCPI and future AADR. PMID:27992612

  15. Am/Cm Vitrification Process: Pretreatment Material Balance Calculations

    International Nuclear Information System (INIS)

    Smith, F.G.

    2001-01-01

    This report documents material balance calculations for the pretreatment steps required to prepare the Americium/Curium solution currently stored in Tank 17.1 in the F-Canyon for vitrification. The material balance uses the latest analysis of the tank contents to provide a best estimate calculation of the expected plant operations during the pretreatment process. The material balance calculations primarily follow the material that directly leads to melter feed. Except for vapor products of the denitration reactions and treatment of supernate from precipitation and precipitate washing, the flowsheet does not include side streams such as acid washes of the empty tanks that would go directly to waste. The calculation also neglects tank heels. This report consolidates previously reported results, corrects some errors found in the spreadsheet and provides a more detailed discussion of the calculation basis

  16. Basics of Desktop Publishing. Second Edition.

    Science.gov (United States)

    Beeby, Ellen; Crummett, Jerrie

    This document contains teacher and student materials for a basic course in desktop publishing. Six units of instruction cover the following: (1) introduction to desktop publishing; (2) desktop publishing systems; (3) software; (4) type selection; (5) document design; and (6) layout. The teacher edition contains some or all of the following…

  17. The Decision to Publish Electronically.

    Science.gov (United States)

    Craig, Gary

    1983-01-01

    Argues that decision to publish a given intellectual product "electronically" is a business decision based on customer needs, available format alternatives, current business climate, and variety of already existing factors. Publishers are most influenced by customers' acceptance of new products and their own role as intermediaries in…

  18. The Evolution of Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1995-01-01

    Discusses the evolution of electronic publishing from the early 1960s when computers were used merely to produce conventional printed products to the present move toward networked scholarly publishing. Highlights include library development, periodicals on the Internet, online journals versus paper journals, problems, and the future of…

  19. Molecular structure and vibrational spectra of MHal3 (M = Sc, Y, La, Lu; Hal = F, Cl, Br, I): ab initio calculations by the CISD+Q method

    International Nuclear Information System (INIS)

    Solomonik, V.G.; Marochko, O.Yu.

    2000-01-01

    Structure and vibrational spectra of MHal 3 molecules (M = Sc, Y, La, Lu; Hal = F, Cl, Br, I) are studied by the CISD+Q method. It is ascertained that equilibrium configuration of nuclei in all the molecules, except LaF 3 , is plane (D 3h symmetry), while that of LaF 3 molecule - pyramidal (C 3c symmetry). Results of the calculations are compared with previously published experimental data. Band reference in IR spectra of ScBr 3 , YF 3 and YCl 3 molecules has been corrected [ru

  20. Electron density values of various human tissues: in vitro Compton scatter measurements and calculated ranges

    International Nuclear Information System (INIS)

    Shrimpton, P.C.

    1981-01-01

    Accurate direct measurements of electron density have been performed on specimens from 10 different tissue types of the human body, representing the major organs, using a Compton scatter technique. As a supplement to these experimental values, calculations have been carried out to determine the electron densities expected for these tissue types. The densities observed are in good agreement with the broad ranges deduced from the basic data previously published. The results of both the in vitro sample measurements and the approximate calculations indicate that the electron density of most normal healthy soft tissue can be expected to fall within the fairly restricted range of +- 5% around 3.4 X 10 23 electrons per cm 3 . The obvious exception to this generalisation is the result for lung tissue, which falls considerably below this range owing to the high air content inherent in its construction. In view of such an overall limited variation with little difference between tissues, it would appear that electron density alone is likely to be a rather poor clinical parameter for tissue analysis, with high accuracy and precision being essential in any in vivo Compton measurements for imaging or diagnosis on specific organs. (author)

  1. Determination of the Boltzmann constant with cylindrical acoustic gas thermometry: new and previous results combined

    Science.gov (United States)

    Feng, X. J.; Zhang, J. T.; Lin, H.; Gillis, K. A.; Mehl, J. B.; Moldover, M. R.; Zhang, K.; Duan, Y. N.

    2017-10-01

    We report a new determination of the Boltzmann constant k B using a cylindrical acoustic gas thermometer. We determined the length of the copper cavity from measurements of its microwave resonance frequencies. This contrasts with our previous work (Zhang et al 2011 Int. J. Thermophys. 32 1297, Lin et al 2013 Metrologia 50 417, Feng et al 2015 Metrologia 52 S343) that determined the length of a different cavity using two-color optical interferometry. In this new study, the half-widths of the acoustic resonances are closer to their theoretical values than in our previous work. Despite significant changes in resonator design and the way in which the cylinder length is determined, the value of k B is substantially unchanged. We combined this result with our four previous results to calculate a global weighted mean of our k B determinations. The calculation follows CODATA’s method (Mohr and Taylor 2000 Rev. Mod. Phys. 72 351) for obtaining the weighted mean value of k B that accounts for the correlations among the measured quantities in this work and in our four previous determinations of k B. The weighted mean {{\\boldsymbol{\\hat{k}}}{B}} is 1.380 6484(28)  ×  10-23 J K-1 with the relative standard uncertainty of 2.0  ×  10-6. The corresponding value of the universal gas constant is 8.314 459(17) J K-1 mol-1 with the relative standard uncertainty of 2.0  ×  10-6.

  2. Exploring Digital News Publishing Business Models

    DEFF Research Database (Denmark)

    Lindskow, Kasper

    News publishers in the industrialized world are experiencing a fundamental challenge to their business models because of the changing modes of consumption, competition, and production of their offerings that are associated with the emergence of the networked information society. The erosion...... of the traditional business models poses an existential threat to news publishing and has given rise to a continuing struggle among news publishers to design digital business models that will be sustainable in the future. This dissertation argues that a central and underresearched aspect of digital news publishing...... business models concerns the production networks that support the co-production of digital news offerings. To fill this knowledge gap, this dissertation explores the strategic design of the digital news publishing production networks that are associated with HTML-based news offerings on the open Web...

  3. Leiomyosarcoma of the Prostate: Case Report and Review of 54 Previously Published Cases

    Directory of Open Access Journals (Sweden)

    Gerasimos P. Vandoros

    2008-01-01

    Full Text Available Prostate leiomyosarcoma is an extremely rare and highly aggressive neoplasm that accounts for less than 0.1% of primary prostate malignancies. We present a patient with primary leiomyosarcoma of the prostate and review 54 cases reported in the literature to discuss the clinical, diagnostic and therapeutic aspects of this uncommon tumor. Median survival was estimated at 17 months (95% C.I. 20.7–43.7 months and the 1-, 3-, and 5-year actuarial survival rates were 68%, 34%, and 26%, respectively. The only factors predictive of long-term survival were negative surgical margins and absence of metastatic disease at presentation. A multidisciplinary approach is necessary for appropriate management of this dire entity.

  4. ESTABLISHING A PUBLISHING OUTFIT IN NIGERIA EMENYONU ...

    African Journals Online (AJOL)

    CIU

    stakeholders in the publishing industry,the legal environment of publishing, ... retailers. Publishing is a peculiar form of business for which a special group of very .... The publisher should provide furniture and fittings for the staff and intended ...

  5. Decentralized provenance-aware publishing with nanopublications

    Directory of Open Access Journals (Sweden)

    Tobias Kuhn

    2016-08-01

    Full Text Available Publication and archival of scientific results is still commonly considered the responsability of classical publishing companies. Classical forms of publishing, however, which center around printed narrative articles, no longer seem well-suited in the digital age. In particular, there exist currently no efficient, reliable, and agreed-upon methods for publishing scientific datasets, which have become increasingly important for science. In this article, we propose to design scientific data publishing as a web-based bottom-up process, without top-down control of central authorities such as publishing companies. Based on a novel combination of existing concepts and technologies, we present a server network to decentrally store and archive data in the form of nanopublications, an RDF-based format to represent scientific data. We show how this approach allows researchers to publish, retrieve, verify, and recombine datasets of nanopublications in a reliable and trustworthy manner, and we argue that this architecture could be used as a low-level data publication layer to serve the Semantic Web in general. Our evaluation of the current network shows that this system is efficient and reliable.

  6. A calculation of Zsub(eff) for low-energy positron-hydrogen-molecule scattering

    International Nuclear Information System (INIS)

    Armour, E.A.G.; Baker, D.J.

    1985-01-01

    The value of Zsub(eff), the effective number of electrons per molecule available to the positron for annihilation, is calculated for low-energy positron-hydrogen-molecule scattering using the scattering wavefunctions obtained in recent detailed ab initio calculations. The results are higher than those obtained in previous calculations but much lower than the experimental value. (author)

  7. MUCH Electronic Publishing Environment: Principles and Practices.

    Science.gov (United States)

    Min, Zheng; Rada, Roy

    1994-01-01

    Discusses the electronic publishing system called Many Using and Creating Hypermedia (MUCH). The MUCH system supports collaborative authoring; reuse; formatting and printing; management; hypermedia publishing and delivery; and interchange. This article examines electronic publishing environments; the MUCH environment; publishing activities; and…

  8. CSRtrack Faster Calculation of 3-D CSR Effects

    CERN Document Server

    Dohlus, Martin

    2004-01-01

    CSRtrack is a new code for the simulation of Coherent Synchrotron radiation effects on the beam dynamics of linear accelerators. It incorporates the physics of our previous code, TraFiC4, and adds new algorithms for the calculation of the CSR fields. A one-dimensional projected method allows quick estimates and a greens function method allows 3D calculations about ten times faster than with the `direct' method. The tracking code is written in standard FORTRAN77 and has its own parser for comfortable input of calculation parameters and geometry. Phase space input and the analysis of the traced particle distribution is done with MATLAB interface programs.

  9. Quantum dynamics calculations using symmetrized, orthogonal Weyl-Heisenberg wavelets with a phase space truncation scheme. III. Representations and calculations.

    Science.gov (United States)

    Poirier, Bill; Salam, A

    2004-07-22

    In a previous paper [J. Theo. Comput. Chem. 2, 65 (2003)], one of the authors (B.P.) presented a method for solving the multidimensional Schrodinger equation, using modified Wilson-Daubechies wavelets, and a simple phase space truncation scheme. Unprecedented numerical efficiency was achieved, enabling a ten-dimensional calculation of nearly 600 eigenvalues to be performed using direct matrix diagonalization techniques. In a second paper [J. Chem. Phys. 121, 1690 (2004)], and in this paper, we extend and elaborate upon the previous work in several important ways. The second paper focuses on construction and optimization of the wavelength functions, from theoretical and numerical viewpoints, and also examines their localization. This paper deals with their use in representations and eigenproblem calculations, which are extended to 15-dimensional systems. Even higher dimensionalities are possible using more sophisticated linear algebra techniques. This approach is ideally suited to rovibrational spectroscopy applications, but can be used in any context where differential equations are involved.

  10. Desktop Publishing in the University.

    Science.gov (United States)

    Burstyn, Joan N., Ed.

    Highlighting changes in the work of people within the university, this book presents nine essays that examine the effects of desktop publishing and electronic publishing on professors and students, librarians, and those who work at university presses and in publication departments. Essays in the book are: (1) "Introduction: The Promise of Desktop…

  11. Web Publishing Schedule

    Science.gov (United States)

    Section 207(f)(2) of the E-Gov Act requires federal agencies to develop an inventory and establish a schedule of information to be published on their Web sites, make those schedules available for public comment. To post the schedules on the web site.

  12. Desktop Publishing Choices: Making an Appropriate Decision.

    Science.gov (United States)

    Crawford, Walt

    1991-01-01

    Discusses various choices available for desktop publishing systems. Four categories of software are described, including advanced word processing, graphics software, low-end desktop publishing, and mainstream desktop publishing; appropriate hardware is considered; and selection guidelines are offered, including current and future publishing needs,…

  13. Adverse obstetric outcomes in women with previous cesarean for dystocia in second stage of labor.

    Science.gov (United States)

    Jastrow, Nicole; Demers, Suzanne; Gauthier, Robert J; Chaillet, Nils; Brassard, Normand; Bujold, Emmanuel

    2013-03-01

    To evaluate obstetric outcomes in women undergoing a trial of labor (TOL) after a previous cesarean for dystocia in second stage of labor. A retrospective cohort study of women with one previous low transverse cesarean undergoing a first TOL was performed. Women with previous cesarean for dystocia in first stage and those with previous dystocia in second stage were compared with those with previous cesarean for nonrecurrent reasons (controls). Multivariable regressions analyses were performed. Of 1655 women, those with previous dystocia in second stage of labor (n = 204) had greater risks than controls (n = 880) to have an operative delivery [odds ratio (OR): 1.5; 95% confidence intervals (CI) 1.1 to 2.2], shoulder dystocia (OR: 2.9; 95% CI 1.1 to 8.0), and uterine rupture in the second stage of labor (OR: 4.9; 95% CI 1.1 to 23), and especially in case of fetal macrosomia (OR: 29.6; 95% CI 4.4 to 202). The median second stage of labor duration before uterine rupture was 2.5 hours (interquartile range: 1.5 to 3.2 hours) in these women. Previous cesarean for dystocia in the second stage of labor is associated with second-stage uterine rupture at next delivery, especially in cases of suspected fetal macrosomia and prolonged second stage of labor. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  14. Exploring Publishing Patterns at a Large Research University: Implications for Library

    Directory of Open Access Journals (Sweden)

    Kathleen Amos

    2012-09-01

    Full Text Available Objective – The research project sought to explore the value of data on publication patterns for decision-making regarding scholarly communications and collection development programs at a research-intensive post-secondary institution, the University of Utah in the United States.Methods – Publication data for prolific University of Utah authors were gathered from Scopus for the year 2009. The availability to University of Utah faculty, staff, and students of the journals in which University of Utah authors published was determined using the University of Utah Libraries’ catalogue; usage was estimated based on publisher-provided download statistics and requests through interlibrary loan; and costs were calculated from invoices, a periodicals directory, and publisher websites and communications. Indicators of value included the cost-per-use of journals to which the University of Utah Libraries subscribed, a comparison of interlibrary loan costs to subscription costs for journals to which the University of Utah Libraries did not subscribe, the relationship between publishing venue and usage, and the relationship between publishing venue and cost-per-use.Results – There were 22 University of Utah authors who published 10 or more articles in 2009. Collectively, these authors produced 275 articles in 162 journals. The University of Utah provided access through library subscriptions to 83% of the journals for which access, usage, and cost data were available, with widely varying usage and at widely varying costs. Cost-per-use and a comparison of interlibrary loan to subscription costs provided evidence of the effectiveness of collection development practices. However, at the individual journal title level, there was little overlap between the various indicators of journal value, with the highest ranked, or most valuable, journals differing depending on the indicator considered. Few of the articles studied appeared in open access journals

  15. Support open access publishing

    DEFF Research Database (Denmark)

    Ekstrøm, Jeannette

    2013-01-01

    Projektet Support Open Access Publishing har til mål at få opdateret Sherpa/Romeo databasen (www.sherpa.ac.uk/romeo) med fagligt relevante, danske tidsskrifter. Projektet skal endvidere undersøge mulighederne for at få udviklet en database, hvor forskere på tværs af relevante tidsskriftsinformati......Projektet Support Open Access Publishing har til mål at få opdateret Sherpa/Romeo databasen (www.sherpa.ac.uk/romeo) med fagligt relevante, danske tidsskrifter. Projektet skal endvidere undersøge mulighederne for at få udviklet en database, hvor forskere på tværs af relevante...

  16. Scientific impact of studies published in temporarily available radiation oncology journals: a citation analysis.

    Science.gov (United States)

    Nieder, Carsten; Geinitz, Hans; Andratschke, Nicolaus H; Grosu, Anca L

    2015-01-01

    The purpose of this study was to review all articles published in two temporarily available radiation oncology journals (Radiation Oncology Investigations, Journal of Radiosurgery) in order to evaluate their scientific impact. From several potential measures of impact and relevance of research, we selected article citation rate because landmark or practice-changing research is likely to be cited frequently. The citation database Scopus was used to analyse number of citations. During the time period 1996-1999 the journal Radiation Oncology Investigations published 205 articles, which achieved a median number of 6 citations (range 0-116). However, the most frequently cited article in the first 4 volumes achieved only 23 citations. The Journal of Radiosurgery published only 31 articles, all in the year 1999, which achieved a median number of 1 citation (range 0-11). No prospective randomized studies or phase I-II collaborative group trials were published in these journals. Apparently, the Journal of Radiosurgery acquired relatively few manuscripts that were interesting and important enough to impact clinical practice. Radiation Oncology Investigations' citation pattern was better and closer related to that reported in several previous studies focusing on the field of radiation oncology. The vast majority of articles published in temporarily available radiation oncology journals had limited clinical impact and achieved few citations. Highly influential research was unlikely to be submitted during the initial phase of establishing new radiation oncology journals.

  17. Prepare to publish.

    Science.gov (United States)

    Price, P M

    2000-01-01

    "I couldn't possibly write an article." "I don't have anything worthwhile to write about." "I am not qualified to write for publication." Do any of these statements sound familiar? This article is intended to dispel these beliefs. You can write an article. You care for the most complex patients in the health care system so you do have something worthwhile to write about. Beside correct spelling and grammar there are no special skills, certificates or diplomas required for publishing. You are qualified to write for publication. The purpose of this article is to take the mystique out of the publication process. Each step of publishing an article will be explained, from idea formation to framing your first article. Practical examples and recommendations will be presented. The essential components of the APA format necessary for Dynamics: The Official Journal of the Canadian Association of Critical Care Nurses will be outlined and resources to assist you will be provided.

  18. Method for calculating required shielding in medical x-ray rooms

    International Nuclear Information System (INIS)

    Karppinen, J.

    1997-10-01

    The new annual radiation dose limits - 20 mSv (previously 50 mSv) for radiation workers and 1 mSv (previously 5 mSv) for other persons - implies that the adequacy of existing radiation shielding must be re-evaluated. In principle, one could assume that the thicknesses of old radiation shields should be increased by about one or two half-value layers in order to comply with the new dose limits. However, the assumptions made in the earlier shielding calculations are highly conservative; the required shielding was often determined by applying the maximum high-voltage of the x-ray tube for the whole workload. A more realistic calculation shows that increased shielding is typically not necessary if more practical x-ray tube voltages are used in the evaluation. We have developed a PC-based calculation method for calculating the x-ray shielding which is more realistic than the highly conservative method formerly used. The method may be used to evaluate an existing shield for compliance with new regulations. As examples of these calculations, typical x-ray rooms are considered. The lead and concrete thickness requirements as a function of x-ray tube voltage and workload are also given in tables. (author)

  19. The phenomenon of claimed memories of previous lives: possible interpretations and importance.

    Science.gov (United States)

    Stevenson, I

    2000-04-01

    Several disorders or abnormalities observed in medicine and psychology are not explicable (or not fully explicable) by genetics and environmental influences, either alone or together. These include phobias and philias observed in early infancy, unusual play in childhood, homosexuality, gender identity disorder, a child's idea of having parents other than its own, differences in temperament manifested soon after birth, unusual birthmarks and their correspondence with wounds on a deceased person, unusual birth defects, and differences (physical and behavioral) between monozygotic twins. The hypothesis of previous lives can contribute to the further understanding of these phenomena. Copyright 2000 Harcourt Publishers Ltd.

  20. Summary of Notifiable Noninfectious Conditions and Disease Outbreaks: Surveillance Data Published Between April 1, 2016 and January 31, 2017 - United States.

    Science.gov (United States)

    Thomas, Kimberly; Jajosky, Ruth; Coates, Ralph J; Calvert, Geoffrey M; Dewey-Mattia, Daniel; Raymond, Jaime; Singh, Simple D

    2017-08-11

    The Summary of Notifiable Noninfectious Conditions and Disease Outbreaks: Surveillance Data Published Between April 1, 2016 and January 31, 2017 - United States, herein referred to as the Summary (Noninfectious), contains official statistics for nationally notifiable noninfectious conditions and disease outbreaks. This Summary (Noninfectious) is being published in the same volume of MMWR as the annual Summary of Notifiable Infectious Diseases and Conditions (1). Data on notifiable noninfectious conditions and disease outbreaks from prior years have been published previously (2,3).

  1. Web Application for Actuarial Calculations for Insurance

    OpenAIRE

    Dobrev, Hristo; Kyurkchiev, Nikolay

    2013-01-01

    Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013 During the last 10 years a growing interest in the modernization of vocational education of actuaries, the content of actuarial study programs, consistent with global traditions and trends is indicated. Web application for insurance actuarial calculations is explored. Association for the Development of the Information Society, Institute of Mathematics and...

  2. Computer program for the sensitivity calculation of a CR-39 detector in a diffusion chamber for radon measurements

    Energy Technology Data Exchange (ETDEWEB)

    Nikezic, D., E-mail: nikezic@kg.ac.rs; Stajic, J. M. [Faculty of Science, University of Kragujevac, R. Domanovica 12, Kragujevac 34000 (Serbia); Yu, K. N. [Department of Physics and Materials Science, City University of Hong Kong, 83 Tat Chee Avenue (Hong Kong)

    2014-02-15

    Computer software for calculation of the sensitivity of a CR-39 detector closed in a diffusion chamber to radon is described in this work. The software consists of two programs, both written in the standard Fortran 90 programming language. The physical background and a numerical example are given. Presented software is intended for numerous researches in radon measurement community. Previously published computer programs TRACK-TEST.F90 and TRACK-VISION.F90 [D. Nikezic and K. N. Yu, Comput. Phys. Commun. 174, 160 (2006); D. Nikezic and K. N. Yu, Comput. Phys. Commun. 178, 591 (2008)] are used here as subroutines to calculate the track parameters and to determine whether the track is visible or not, based on the incident angle, impact energy, etching conditions, gray level, and visibility criterion. The results obtained by the software, using five different V functions, were compared with the experimental data found in the literature. Application of two functions in this software reproduced experimental data very well, while other three gave lower sensitivity than experiment.

  3. CONTRIBUTION FOR MINING ATMOSPHERE CALCULATION

    Directory of Open Access Journals (Sweden)

    Franica Trojanović

    1989-12-01

    Full Text Available Humid air is an unavoidable feature of mining atmosphere, which plays a significant role in defining the climate conditions as well as permitted circumstances for normal mining work. Saturated humid air prevents heat conduction from the human body by means of evaporation. Consequently, it is of primary interest in the mining practice to establish the relative air humidity either by means of direct or indirect methods. Percentage of water in the surrounding air may be determined in various procedures including tables, diagrams or particular calculations, where each technique has its specific advantages and disadvantages. Classical calculation is done according to Sprung's formula, in which case partial steam pressure should also be taken from the steam table. The new method without the use of diagram or tables, established on the functional relation of pressure and temperature on saturated line, is presented here for the first time (the paper is published in Croatian.

  4. Calculational study for criticality safety data of fissionable actinides

    International Nuclear Information System (INIS)

    Nojiri, Ichiro; Fukasaku, Yasuhiro.

    1997-01-01

    This study has been carried out to obtain basic criticality safety characteristics of minor actinides nuclides. Criticality safety data of minor actinides nuclides have been surveyed through public literatures. Critical mass of seven nuclides, Np-237, Am-241, Am-242m, Am-243, Cm-243, Cm-244 and Cm-245, have been calculated by using two code systems of criticality safety analysis, SCALE-4 and MCNP4A, under some material and reflector conditions. Some applicable cross-section libraries have been used for each code systems. Calculated data have been compared with each other and with published data. The results of this comparison shows that there is no discrepancy within the computational codes and the calculated data is strongly depend on the cross-section library. (author)

  5. Benchmark calculations for VENUS-2 MOX -fueled reactor dosimetry

    International Nuclear Information System (INIS)

    Kim, Jong Kung; Kim, Hong Chul; Shin, Chang Ho; Han, Chi Young; Na, Byung Chan

    2004-01-01

    As a part of a Nuclear Energy Agency (NEA) Project, it was pursued the benchmark for dosimetry calculation of the VENUS-2 MOX-fueled reactor. In this benchmark, the goal is to test the current state-of-the-art computational methods of calculating neutron flux to reactor components against the measured data of the VENUS-2 MOX-fuelled critical experiments. The measured data to be used for this benchmark are the equivalent fission fluxes which are the reaction rates divided by the U 235 fission spectrum averaged cross-section of the corresponding dosimeter. The present benchmark is, therefore, defined to calculate reaction rates and corresponding equivalent fission fluxes measured on the core-mid plane at specific positions outside the core of the VENUS-2 MOX-fuelled reactor. This is a follow-up exercise to the previously completed UO 2 -fuelled VENUS-1 two-dimensional and VENUS-3 three-dimensional exercises. The use of MOX fuel in LWRs presents different neutron characteristics and this is the main interest of the current benchmark compared to the previous ones

  6. Comics, Copyright and Academic Publishing

    Directory of Open Access Journals (Sweden)

    Ronan Deazley

    2014-05-01

    Full Text Available This article considers the extent to which UK-based academics can rely upon the copyright regime to reproduce extracts and excerpts from published comics and graphic novels without having to ask the copyright owner of those works for permission. In doing so, it invites readers to engage with a broader debate about the nature, demands and process of academic publishing.

  7. Methodology for calculation of doses to man and implementation in Pandora

    Energy Technology Data Exchange (ETDEWEB)

    Avila, Rodolfo [Facilia AB, Bromma (Sweden); Bergstroem, Ulla [Swepro Project Management AB, Solna (Sweden)

    2006-07-15

    This report describes methods and data for calculation of doses to man to be used in safety assessments of repositories for nuclear fuel. The methods are based on the latest recommendations from the ICRP; the EU and the national radiation protection authorities. Equations are given for calculation of doses from ingestion of contaminated water and food, inhalation of contaminated air and external exposure from radionuclides in the ground. With the exception of the exposure from food ingestion, the equations are the same used in previous safety assessments. A general equation is suggested for estimation of the exposure from food ingestion, in which the annual demand of carbon is used instead of the annual ingestion of different food-stuffs, which was earlier applied. The report contains tables with recommended values for physiological characteristics such as water intake, food intake and inhalation rates, based on information summarised in an Appendix. Furthermore, tables are given with recommended age dependent dose conversion factors for ingestion and inhalation for a number of nuclides of interest for safety assessments. The most recently published dose conversion factors for external exposure from contaminated ground are also given. An overview of the implementation of the methodology in Pandora, which is the tool that SKB and Posiva currently use for biosphere modelling, is also provided. The work presented in the report is a result from a joint project commissioned by SKB and Posiva.

  8. Methodology for calculation of doses to man and implementation in Pandora

    International Nuclear Information System (INIS)

    Avila, Rodolfo; Bergstroem, Ulla

    2006-07-01

    This report describes methods and data for calculation of doses to man to be used in safety assessments of repositories for nuclear fuel. The methods are based on the latest recommendations from the ICRP; the EU and the national radiation protection authorities. Equations are given for calculation of doses from ingestion of contaminated water and food, inhalation of contaminated air and external exposure from radionuclides in the ground. With the exception of the exposure from food ingestion, the equations are the same used in previous safety assessments. A general equation is suggested for estimation of the exposure from food ingestion, in which the annual demand of carbon is used instead of the annual ingestion of different food-stuffs, which was earlier applied. The report contains tables with recommended values for physiological characteristics such as water intake, food intake and inhalation rates, based on information summarised in an Appendix. Furthermore, tables are given with recommended age dependent dose conversion factors for ingestion and inhalation for a number of nuclides of interest for safety assessments. The most recently published dose conversion factors for external exposure from contaminated ground are also given. An overview of the implementation of the methodology in Pandora, which is the tool that SKB and Posiva currently use for biosphere modelling, is also provided. The work presented in the report is a result from a joint project commissioned by SKB and Posiva

  9. Electronic publishing and Acupuncture in Medicine.

    Science.gov (United States)

    White, Adrian

    2006-09-01

    The internet has fundamentally altered scientific publishing; this article discusses current models and how they affect this journal. The greatest innovation is a new range of open access journals published only on the internet, aimed at rapid publication and universal access. In most cases authors pay a publication charge for the overhead costs of the journal. Journals that are published by professional organisations primarily for their members have some functions other than publishing research, including clinical articles, conference reports and news items. A small number of these journals are permitting open access to their research reports. Commercial science publishing still exists, where profit for shareholders provides motivation in addition to the desire to spread knowledge for the benefit of all. A range of electronic databases now exists that offer various levels of listing and searching. Some databases provide direct links to journal articles, such as the LinkOut scheme in PubMed. Acupuncture in Medicine will continue to publish in paper format; all research articles will be available on open access, but non-subscribers will need to pay for certain other articles for the first 12 months after publication. All Acupuncture in Medicine articles will in future be included in the LinkOut scheme, and be presented to the databases electronically.

  10. Weldon Spring dose calculations

    International Nuclear Information System (INIS)

    Dickson, H.W.; Hill, G.S.; Perdue, P.T.

    1978-09-01

    In response to a request by the Oak Ridge Operations (ORO) Office of the Department of Energy (DOE) for assistance to the Department of the Army (DA) on the decommissioning of the Weldon Spring Chemical Plant, the Health and Safety Research Division of the Oak Ridge National Laboratory (ORNL) performed limited dose assessment calculations for that site. Based upon radiological measurements from a number of soil samples analyzed by ORNL and from previously acquired radiological data for the Weldon Spring site, source terms were derived to calculate radiation doses for three specific site scenarios. These three hypothetical scenarios are: a wildlife refuge for hunting, fishing, and general outdoor recreation; a school with 40 hr per week occupancy by students and a custodian; and a truck farm producing fruits, vegetables, meat, and dairy products which may be consumed on site. Radiation doses are reported for each of these scenarios both for measured uranium daughter equilibrium ratios and for assumed secular equilibrium. Doses are lower for the nonequilibrium case

  11. Calculation of gas temperature at the outlet of the combustion chamber and in the air-gas channel of a gas-turbine unit by data of acceptance tests in accordance with ISO

    Science.gov (United States)

    Kostyuk, A. G.; Karpunin, A. P.

    2016-01-01

    This article describes a high accuracy method enabling performance of the calculation of real values of the initial temperature of a gas turbine unit (GTU), i.e., the gas temperature at the outlet of the combustion chamber, in a situation where manufacturers do not disclose this information. The features of the definition of the initial temperature of the GTU according to ISO standards were analyzed. It is noted that the true temperatures for high-temperature GTUs is significantly higher than values determined according to ISO standards. A computational procedure for the determination of gas temperatures in the air-gas channel of the gas turbine and cooling air consumptions over blade rims is proposed. As starting equations, the heat balance equation and the flow mixing equation for the combustion chamber are assumed. Results of acceptance GTU tests according to ISO standards and statistical dependencies of required cooling air consumptions on the gas temperature and the blade metal are also used for calculations. An example of the calculation is given for one of the units. Using a developed computer program, the temperatures in the air-gas channel of certain GTUs are calculated, taking into account their design features. These calculations are performed on the previously published procedure for the detailed calculation of the cooled gas turbine subject to additional losses arising because of the presence of the cooling system. The accuracy of calculations by the computer program is confirmed by conducting verification calculations for the GTU of the Mitsubishi Comp. and comparing results with published data of the company. Calculation data for temperatures were compared with the experimental data and the characteristics of the GTU, and the error of the proposed method is estimated.

  12. Self-reported previous knee injury and low knee function increase knee injury risk in adolescent female football.

    Science.gov (United States)

    Clausen, M B; Tang, L; Zebis, M K; Krustrup, P; Hölmich, P; Wedderkopp, N; Andersen, L L; Christensen, K B; Møller, M; Thorborg, K

    2016-08-01

    Knee injuries are common in adolescent female football. Self-reported previous knee injury and low Knee injury and Osteoarthritis Outcome Score (KOOS) are proposed to predict future knee injuries, but evidence regarding this in adolescent female football is scarce. The aim of this study was to investigate self-reported previous knee injury and low KOOS subscale score as risk factors for future knee injuries in adolescent female football. A sample of 326 adolescent female football players, aged 15-18, without knee injury at baseline, were included. Data on self-reported previous knee injury and KOOS questionnaires were collected at baseline. Time-loss knee injuries and football exposures were reported weekly by answers to standardized text-message questions, followed by injury telephone interviews. A priori, self-reported previous knee injury and low KOOS subscale scores (female football. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  13. Electronic publishing in radiology: economics and the future.

    Science.gov (United States)

    Chew, Felix S; Llewellyn, Kevin T; Olsen, Kathryn M

    2004-11-01

    Scholarly publishing is a large market involving thousands of peer-reviewed journals but a decreasing number of publishers. An economic model can be described in which authors give their work to publishers who then sell access to this work. Because each published article is a unique work with few if any substitutes, publishers have some degree of monopoly power and can price their products accordingly. The advent of desktop publishing using personal computers made it possible for individuals to publish material without publishers, an activity that gained momentum when the publishing medium shifted from paper to electronic, and from electronic publishing to the Internet. This activity destabilized the industry, and in the rush to gain market share by providing free content, unsustainable business models were created. Scholarly publishing is now dominated by a small number of multinational corporations that acquired many smaller publishing operations. As these companies have exercised their monopoly power, an open access movement has gained traction in which authors (or their institutions) initially pay for publication, but readers have free and open access to the published articles. This movement is in diametric opposition to the commercial publishing model, and it remains to be seen whether and how well the two can coexist in the future.

  14. Adventures in semantic publishing: exemplar semantic enhancements of a research article.

    Directory of Open Access Journals (Sweden)

    David Shotton

    2009-04-01

    Full Text Available Scientific innovation depends on finding, integrating, and re-using the products of previous research. Here we explore how recent developments in Web technology, particularly those related to the publication of data and metadata, might assist that process by providing semantic enhancements to journal articles within the mainstream process of scholarly journal publishing. We exemplify this by describing semantic enhancements we have made to a recent biomedical research article taken from PLoS Neglected Tropical Diseases, providing enrichment to its content and increased access to datasets within it. These semantic enhancements include provision of live DOIs and hyperlinks; semantic markup of textual terms, with links to relevant third-party information resources; interactive figures; a re-orderable reference list; a document summary containing a study summary, a tag cloud, and a citation analysis; and two novel types of semantic enrichment: the first, a Supporting Claims Tooltip to permit "Citations in Context", and the second, Tag Trees that bring together semantically related terms. In addition, we have published downloadable spreadsheets containing data from within tables and figures, have enriched these with provenance information, and have demonstrated various types of data fusion (mashups with results from other research articles and with Google Maps. We have also published machine-readable RDF metadata both about the article and about the references it cites, for which we developed a Citation Typing Ontology, CiTO (http://purl.org/net/cito/. The enhanced article, which is available at http://dx.doi.org/10.1371/journal.pntd.0000228.x001, presents a compelling existence proof of the possibilities of semantic publication. We hope the showcase of examples and ideas it contains, described in this paper, will excite the imaginations of researchers and publishers, stimulating them to explore the possibilities of semantic publishing for their own

  15. The Impact of Electronic Commerce on the Publishing Industry: Towards a Business Value Complementarity Framework of Electronic Publishing.

    Science.gov (United States)

    Scupola, Ada

    1999-01-01

    Discussion of the publishing industry and its use of information and communication technologies focuses on the way in which electronic-commerce technologies are changing and could change the publishing processes, and develops a business complementarity model of electronic publishing to maximize profitability and improve the competitive position.…

  16. Audit calculation for the LOCA methodology for KSNP

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Un Chul; Park, Chang Hwan; Choi, Yong Won; Yoo, Jun Soo [Seoul National Univ., Seoul (Korea, Republic of)

    2006-11-15

    The objective of this research is to perform the audit regulatory calculation for the LOCA methodology for KSNP. For LBLOCA calculation, several uncertainty variables and new ranges of those are added to those of previous KINS-REM to improve the applicability of KINS-REM for KSNP LOCA. And those results are applied to LBLOCA audit calculation by statistical method. For SBLOCA calculation, after selecting BATHSY9.1.b, which is not used by KHNP, the results of RELAP5/Mod3.3 and RELAP5/MOD3.3ef-sEM for KSNP SBLOCA are compared to evaluate the conservativeness or applicability of RELAP5/MOD3.3ef-sEM code for KSNP SBLOCA. The result of this research can be used to support the activities of KINS for reviewing the LOCA methodology for KSNP proposed by KHNP.

  17. Strategic Brand Management Tools in Publishing

    OpenAIRE

    Pitsaki, Irini

    2011-01-01

    Further to the introduction of the brand concept evolution and theory, as well as the ways these operate in the publishing sector (see paper: Pitsaki, I. 2010), the present paper treats publishing strategies and the tools used to establish them. Publishers often base their brand strategy on classic marketing approaches, such as the marketing mix -product, price, promotion, placement and people. They also direct their products to specific market segments in regard to the type of content and te...

  18. Ethical issues in publishing in predatory journals.

    Science.gov (United States)

    Ferris, Lorraine E; Winker, Margaret A

    2017-06-15

    Predatory journals, or journals that charge an article processing charge (APC) to authors, yet do not have the hallmarks of legitimate scholarly journals such as peer review and editing, Editorial Boards, editorial offices, and other editorial standards, pose a number of new ethical issues in journal publishing. This paper discusses ethical issues around predatory journals and publishing in them. These issues include misrepresentation; lack of editorial and publishing standards and practices; academic deception; research and funding wasted; lack of archived content; and undermining confidence in research literature. It is important that the scholarly community, including authors, institutions, editors, and publishers, support the legitimate scholarly research enterprise, and avoid supporting predatory journals by not publishing in them, serving as their editors or on the Editorial Boards, or permitting faculty to knowingly publish in them without consequences.

  19. Calculational advance in the modeling of fuel-coolant interactions

    International Nuclear Information System (INIS)

    Bohl, W.R.

    1982-01-01

    A new technique is applied to numerically simulate a fuel-coolant interaction. The technique is based on the ability to calculate separate space- and time-dependent velocities for each of the participating components. In the limiting case of a vapor explosion, this framework allows calculation of the pre-mixing phase of film boiling and interpenetration of the working fluid by hot liquid, which is required for extrapolating from experiments to a reactor hypothetical accident. Qualitative results are compared favorably to published experimental data where an iron-alumina mixture was poured into water. Differing results are predicted with LMFBR materials

  20. Fluence to absorbed foetal dose conversion coefficients for photons in 50 keV-10 GeV calculated using RPI-P models

    International Nuclear Information System (INIS)

    Taranenko, V.; Xu, X.G.

    2008-01-01

    Radiation protection of pregnant females and the foetus against ionising radiation is of particular importance to radiation protection due to high foetal radiosensitivity. The only available set of foetal conversion coefficients for photons is based on stylised models of simplified anatomy. Using the RPI-P series of pregnant female and foetus models representing 3-, 6- and 9-month gestation, a set of new fluence to absorbed foetal dose conversion coefficients has been calculated. The RPI-P anatomical models were developed using novel 3D geometry modelling techniques. Organ masses were adjusted to agree within 1% with the ICRP reference data for a pregnant female. Monte Carlo dose calculations were carried out using the MCNPX and Penelope codes for external 50 keV-10 GeV photon beams of six standard configurations. The models were voxelised at 3-mm voxel resolution. Conversion coefficients were tabulated for the three gestational periods for the whole foetus and brain. Comparison with previously published data showed deviations up to 120% for the foetal doses at 50 keV. The discrepancy can be primarily ascribed to anatomical differences. Comparison with published data for five major mother organs is also provided for the 3-month model. Since the RPI-P models exhibit a high degree of anatomical realism, the reported dataset is recommended as a reference for radiation protection of the foetus against external photon exposure. (authors)

  1. Biased calculations: Numeric anchors influence answers to math equations

    Directory of Open Access Journals (Sweden)

    Andrew R. Smith

    2011-02-01

    Full Text Available People must often perform calculations in order to produce a numeric estimate (e.g., a grocery-store shopper estimating the total price of his or her shopping cart contents. The current studies were designed to test whether estimates based on calculations are influenced by comparisons with irrelevant anchors. Previous research has demonstrated that estimates across a wide range of contexts assimilate toward anchors, but none has examined estimates based on calculations. In two studies, we had participants compare the answers to math problems with anchors. In both studies, participants' estimates assimilated toward the anchor values. This effect was moderated by time limit such that the anchoring effects were larger when the participants' ability to engage in calculations was limited by a restrictive time limit.

  2. A program for monitor unit calculation for high energy photon beams in isocentric condition based on measured data

    International Nuclear Information System (INIS)

    Gesheva-Atanasova, N.

    2008-01-01

    The aim of this study is: 1) to propose a procedure and a program for monitor unit calculation for radiation therapy with high energy photon beams, based on data measured by author; 2) to compare this data with published one and 3) to evaluate the precision of the monitor unit calculation program. From this study it could be concluded that, we reproduced with a good agreement the published data, except the TPR values for dept up to 5 cm. The measured relative weight of upper and lower jaws - parameter A was dramatically different from the published data, but perfectly described the collimator exchange effect for our treatment machine. No difference was found between the head scatter ratios, measured in a mini phantom and those measured with a proper brass buildup cap. Our monitor unit calculation program was found to be reliable and it can be applied for check up of the patient's plans for irradiation with high energy photon beams and for some fast calculations. Because of the identity in the construction, design and characteristics of the Siemens accelerators, and the agreement with the published data for the same beam qualities, we hope that most of our experimental data and this program can be used after verification in other hospitals

  3. Peruvian Tropical Glacier May Survive Longer Than Previously Thought: Landsat Image Analysis of Nevado Coropuna Ice Cap, Peru

    Science.gov (United States)

    Kochtitzky, W. H.; Edwards, B. R.; Marino, J.; Manrique, N.

    2015-12-01

    Nevado Coropuna is a large volcanic complex in southern Peru (15.56°S, 72.62°N; 6,425 m). The complex is approximately 12 km east-west and 8 km north-south with elevation from ~4,500 m at the base to over 6,000 m at the highest points. This ice cap is the largest hosted by a volcano in the tropics, and one of the ten biggest ice masses in the tropics. Previous workers have predicted that the Coropuna ice cap will completely melt by 2050. We present a new analysis of historic satellite imagery to test this hypothesis. In this study, ice and snow are classified based on unique spectral signatures including spectral band thresholds, Normalized Difference Snow Index, and Band 4/5 ratio. Landsat scenes (L2, 4, 5, 7, and 8) from 1975 to present in addition to one SPOT scene (2013) are used. Previous workers used images from June and July, which are peak snow periods in southern Peru, leading to overestimates of ice area. This study uses November and December images when snow is at an annual minimum. Annual equilibrium line altitudes are calculated for each end of year image (November/December). The glaciers of Nevado Coropuna were found to be shrinking at ~0.5 km2/yr, which is ~1/3 the rate previously published. In this study, SPOT (1.5 m resolution) and Landsat 7 ETM scenes from November 23 and 26, 2013 respectively were used to calibrate the spectral band threshold classification. While this study suggests that the ice cap of Coropuna will persist until 2100 given current rates, water quantity and security remains a concern for Peruvian agriculture. Coropuna is an active volcano, so it poses great risk to surrounding inhabitants from lahars, flooding, and debris avalanches. Our new data suggest that these will continue to be risks late into this century.

  4. A new calculation of atmospheric neutrino flux: the FLUKA approach

    International Nuclear Information System (INIS)

    Battistoni, G.; Bloise, C.; Cavalli, D.; Ferrari, A.; Montaruli, T.; Rancati, T.; Resconi, S.; Ronga, F.; Sala, P.R.

    1999-01-01

    Preliminary results from a full 3-D calculation of atmospheric neutrino fluxes using the FLUKA interaction model are presented and compared to previous existing calculations. This effort is motivated mainly by the 3-D capability and the satisfactory degree of accuracy of the hadron-nucleus models embedded in the FLUKA code. Here we show examples of benchmarking tests of the model with cosmic ray experiment results. A comparison of our calculation of the atmospheric neutrino flux with that of the Bartol group, for E ν > 1 GeV, is presented

  5. Calculation of ex-core detector responses

    Energy Technology Data Exchange (ETDEWEB)

    Wouters, R. de; Haedens, M. [Tractebel Engineering, Brussels (Belgium); Baenst, H. de [Electrabel, Brussels (Belgium)

    2005-07-01

    The purpose of this work carried out by Tractebel Engineering, is to develop and validate a method for predicting the ex-core detector responses in the NPPs operated by Electrabel. Practical applications are: prediction of ex-core calibration coefficients for startup power ascension, replacement of xenon transients by theoretical predictions, and analysis of a Rod Drop Accident. The neutron diffusion program PANTHER calculates node-integrated fission sources which are combined with nodal importance representing the contribution of a neutron born in that node to the ex-core response. These importance are computed with the Monte Carlo program MCBEND in adjoint mode, with a model of the whole core at full power. Other core conditions are treated using sensitivities of the ex-core responses to water densities, computed with forward Monte Carlo. The Scaling Factors (SF), or ratios of the measured currents to the calculated response, have been established on a total of 550 in-core flux maps taken in four NPPs. The method has been applied to 15 startup transients, using the average SF obtained from previous cycles, and to 28 xenon transients, using the SF obtained from the in-core map immediately preceding the transient. The values of power (P) and axial offset (AOi) reconstructed with the theoretical calibration agree well with the measured values. The ex-core responses calculated during a rod drop transient have been successfully compared with available measurements, and with theoretical data obtained by alternative methods. In conclusion, the method is adequate for the practical applications previously listed. (authors)

  6. INNOVATION MANAGEMENT TOOLS IN PUBLISHING COMPANIES

    Directory of Open Access Journals (Sweden)

    A. Shegda

    2013-09-01

    Full Text Available This article is devoted to the highly topical issue of modern publishing business as innovation management. introduction of technological innovation, measured as a promising strategy for the development of a constructive industry. The paper deals with main problems in managing of publishing companies. The reference consider of innovation management tools. In the article are exams the problems of books trend decline which require publishers introducing innovative methods of production and distribution. It was found that while the tools can be used. The process of innovation management with the following basic tools like as marketing innovation bench marketing, franchising, engineering innovation. It was found that while the tools can be used. So, the aim of the article is to analyze the modern tools of innovation management in the publishing field.

  7. Critical analysis of marketing in Croatian publishing

    Directory of Open Access Journals (Sweden)

    Silvija Gašparić

    2018-03-01

    Full Text Available Marketing is an inevitable part of today's modern lifestyle. The role that marketing plays is so big that it has become the most important part of business. Due to crisis that is still affecting publishers in Croatia, this paper emphasizes the power of advertising as a key ingredient in how to overcome this situation and upgrade the system of publishing in Croatia. The framework of the paper is based on marketing as a tool that leads to popularization of books and sales increase. Beside the experimental part which gives an insight into public's opinion about books, publishing and marketing, the first chapter gives the literature review and analysis conducted on the whole process of book publishing in Croatia with pointing out mistakes that Croatian publishers make. Also, benefits of foreign publishing will be mentioned and used for comparison and projection on to the problems of the native market. The aim of this analysis and this viewpoint paper is to contribute the comprehension of marketing strategies and activities and its use and gains in Croatian publishing.

  8. Desktop Publishing: Changing Technology, Changing Occupations.

    Science.gov (United States)

    Stanton, Michael

    1991-01-01

    Describes desktop publishing (DTP) and its place in corporations. Lists job titles of those working in desktop publishing and describes DTP as it is taught at secondary and postsecondary levels and by private trainers. (JOW)

  9. Comparison of 7 Published LC-MS/MS Methods for the Simultaneous Measurement of Testosterone, Androstenedione, and Dehydroepiandrosterone in Serum

    DEFF Research Database (Denmark)

    Büttler, Rahel M; Martens, Frans; Fanelli, Flaminia

    2015-01-01

    , and dehydroepiandrosterone (DHEA). METHODS: We used 7 published LC-MS/MS methods to analyze in duplicate 55 random samples from both men and women. We performed Passing-Bablok regression analysis and calculated Pearson correlation coefficients to assess the agreement of the methods investigated with the median concentration...

  10. A Survey of Patients' Preoperative Need for Information About Postoperative Pain-Effect of Previous Surgery Experience.

    Science.gov (United States)

    Mavridou, Paraskevi; Manataki, Adamantia; Arnaoutoglou, Elena; Damigos, Dimitrios

    2017-10-01

    The aim of this study was to determine the kind of information patients need preoperatively about postoperative pain (POP) and whether this is affected by previous surgery experience. A descriptive study design using preoperative questionnaires. Questionnaires with fixed questions related to POP and its management were distributed preoperatively to consenting, consecutive surgical patients. Patients were divided into two groups: patients with previous surgery experience (group A) and patients without previous surgery experience (group B). Of the patients who participated in the study, 94.2% wanted information about POP and 77.8% of them believe that they will feel calmer if they get the information they need. The patients' biggest concern relates to pain management issues after discharge. Next, in order of preference is information about the analgesics that they need to take. The patients want to be informed primarily with a personal interview (59.4%). Previous surgery experience has no effect on patients' needs for information. Most of the patients want to be informed about the management of the POP after being discharged. It is remarkable that patients who had previous surgery experience need the same information with those who had no previous surgery. Copyright © 2016 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

  11. Calculation of radiative opacity of plasma mixtures using a relativistic screened hydrogenic model

    International Nuclear Information System (INIS)

    Mendoza, M.A.; Rubiano, J.G.; Gil, J.M.; Rodríguez, R.; Florido, R.; Espinosa, G.; Martel, P.; Mínguez, E.

    2014-01-01

    We present the code ATMED based on an average atom model and conceived for fast computing the population distribution and radiative properties of hot and dense single and multicomponent plasmas under LTE conditions. A relativistic screened hydrogenic model (RSHM), built on a new set of universal constants considering j-splitting, is used to calculate the required atomic data. The opacity model includes radiative bound–bound, bound–free, free–free, and scattering processes. Bound–bound line-shape function has contributions from natural, Doppler and electron-impact broadenings. An additional dielectronic broadening to account for fluctuations in the average level populations has been included, which improves substantially the Rosseland mean opacity results. To illustrate the main features of the code and its capabilities, calculations of several fundamental quantities of one-component plasmas and mixtures are presented, and a comparison with previously published data is performed. Results are satisfactorily compared with those predicted by more elaborate codes. - Highlights: • A new opacity code, ATMED, based on the average atom approximation is presented. • Atomic data are computed by means of a relativistic screened hydrogenic model. • An effective bound level degeneracy is included for accounting pressure ionization. • A new dielectronic line broadening is included to improve the mean opacities. • ATMED has the possibility to handle with single element and multicomponent plasmas

  12. Promises and Realities of Desktop Publishing.

    Science.gov (United States)

    Thompson, Patricia A.; Craig, Robert L.

    1991-01-01

    Examines the underlying assumptions of the rhetoric of desktop publishing promoters. Suggests four criteria to help educators provide insights into issues and challenges concerning desktop publishing technology that design students will face on the job. (MG)

  13. Ab initio calculation of positron distribution, ACAR and lifetime in TTF-TCNQ

    International Nuclear Information System (INIS)

    Ishibashi, Shoji; Kohyama, Masanori

    2000-01-01

    We have performed ab initio calculations of positron distribution, ACAR and lifetime in the quasi-one-dimensional organic conductor TTF-TCNQ. The electronic structure is obtained within the LDA, while the positron state is calculated either with the LDA or with the GGA. Except the positron lifetime, differences between the LDA and GGA results are rather small. The obtained results are compared with our previous experiments and calculations.

  14. Making the Leap to Desktop Publishing.

    Science.gov (United States)

    Schleifer, Neal

    1986-01-01

    Describes one teacher's approach to desktop publishing. Explains how the Macintosh and LaserWriter were used in the publication of a school newspaper. Guidelines are offered to teachers for the establishment of a desktop publishing lab. (ML)

  15. Electronic Journal Publishing: Observations from Inside.

    Science.gov (United States)

    Hunter, Karen

    1998-01-01

    Focuses on electronic scholarly-journal publishing. Discusses characteristics of current academic electronic publishing; effects of the World Wide Web; user needs and positions of academic libraries; costs; and decisions of research librarians that drive the industry. (AEF)

  16. Open Access Publishing in the Electronic Age.

    Science.gov (United States)

    Kovács, Gábor L

    2014-10-01

    The principle of open-access (OA) publishing is more and more prevalent also on the field of laboratory medicine. Open-access journals (OAJs) are available online to the reader usually without financial, legal, or technical barriers. Some are subsidized, and some require payment on behalf of the author. OAJs are one of the two general methods for providing OA. The other one is self-archiving in a repository. The electronic journal of the IFCC (eJIFCC) is a platinum OAJ- i.e. there is no charge to read, or to submit to this journal. Traditionally, the author was required to transfer the copyright to the journal publisher. Publishers claimed this was necessary in order to protect author's rights. However, many authors found this unsatisfactory, and have used their influence to affect a gradual move towards a license to publish instead. Under such a system, the publisher has permission to edit, print, and distribute the article commercially, but the author(s) retain the other rights themselves. An OA mandate is a policy adopted by a research institution, research funder, or government which requires researchers to make their published, peer-reviewed journal articles and conference papers OA by self-archiving their peer-reviewed drafts in a repository ("green OA") or by publishing them in an OAJ ("gold OA"). Creative Commons (CC) is a nonprofit organization that enables the sharing and use of creativity and knowledge through free legal tools. The free, easy-to-use copyright licenses provide a simple, standardized way to give the public permission to share and use creative work. CC licenses let you easily change your copyright terms from the default of "all rights reserved" to "some rights reserved." OA publishing also raises a number of new ethical problems (e.g. predatory publishers, fake papers). Laboratory scientists are encouraged to publish their scientific results OA (especially in eJIFCC). They should, however, be aware of their rights, institutional mandate

  17. Using a Novel Absolute Ontogenetic Age Determination Technique to Calculate the Timing of Tooth Eruption in the Saber-Toothed Cat, Smilodon fatalis.

    Directory of Open Access Journals (Sweden)

    M Aleksander Wysocki

    Full Text Available Despite the superb fossil record of the saber-toothed cat, Smilodon fatalis, ontogenetic age determination for this and other ancient species remains a challenge. The present study utilizes a new technique, a combination of data from stable oxygen isotope analyses and micro-computed tomography, to establish the eruption rate for the permanent upper canines in Smilodon fatalis. The results imply an eruption rate of 6.0 millimeters per month, which is similar to a previously published average enamel growth rate of the S. fatalis upper canines (5.8 millimeters per month. Utilizing the upper canine growth rate, the upper canine eruption rate, and a previously published tooth replacement sequence, this study calculates absolute ontogenetic age ranges of tooth development and eruption in S. fatalis. The timing of tooth eruption is compared between S. fatalis and several extant conical-toothed felids, such as the African lion (Panthera leo. Results suggest that the permanent dentition of S. fatalis, except for the upper canines, was fully erupted by 14 to 22 months, and that the upper canines finished erupting at about 34 to 41 months. Based on these developmental age calculations, S. fatalis individuals less than 4 to 7 months of age were not typically preserved at Rancho La Brea. On the whole, S. fatalis appears to have had delayed dental development compared to dental development in similar-sized extant felids. This technique for absolute ontogenetic age determination can be replicated in other ancient species, including non-saber-toothed taxa, as long as the timing of growth initiation and growth rate can be determined for a specific feature, such as a tooth, and that growth period overlaps with the development of the other features under investigation.

  18. Using a Novel Absolute Ontogenetic Age Determination Technique to Calculate the Timing of Tooth Eruption in the Saber-Toothed Cat, Smilodon fatalis.

    Science.gov (United States)

    Wysocki, M Aleksander; Feranec, Robert S; Tseng, Zhijie Jack; Bjornsson, Christopher S

    2015-01-01

    Despite the superb fossil record of the saber-toothed cat, Smilodon fatalis, ontogenetic age determination for this and other ancient species remains a challenge. The present study utilizes a new technique, a combination of data from stable oxygen isotope analyses and micro-computed tomography, to establish the eruption rate for the permanent upper canines in Smilodon fatalis. The results imply an eruption rate of 6.0 millimeters per month, which is similar to a previously published average enamel growth rate of the S. fatalis upper canines (5.8 millimeters per month). Utilizing the upper canine growth rate, the upper canine eruption rate, and a previously published tooth replacement sequence, this study calculates absolute ontogenetic age ranges of tooth development and eruption in S. fatalis. The timing of tooth eruption is compared between S. fatalis and several extant conical-toothed felids, such as the African lion (Panthera leo). Results suggest that the permanent dentition of S. fatalis, except for the upper canines, was fully erupted by 14 to 22 months, and that the upper canines finished erupting at about 34 to 41 months. Based on these developmental age calculations, S. fatalis individuals less than 4 to 7 months of age were not typically preserved at Rancho La Brea. On the whole, S. fatalis appears to have had delayed dental development compared to dental development in similar-sized extant felids. This technique for absolute ontogenetic age determination can be replicated in other ancient species, including non-saber-toothed taxa, as long as the timing of growth initiation and growth rate can be determined for a specific feature, such as a tooth, and that growth period overlaps with the development of the other features under investigation.

  19. Extensions to the coupling coefficient calculations for muon telescopes

    International Nuclear Information System (INIS)

    Baker, C.P.; Humble, J.E.; Duldig, M.L.

    1989-01-01

    The calculation of coupling coefficients for muon telescopes has previously used interpolation from a limited set of asymptotic directions of arrival of primary particles. Furthermore, these calculations have not incorporated curvature of the atmosphere and thus diverge from the true response at zenith angles greater than about 75 degrees. The necessary extensions to calculate coupling coefficients at arbitrary zenith angles are given, including an improved method of incorporating the asymptotic directions of the primary particles. It is shown, using this method, that certain coupling coefficients are highly sensitive to small changes in asymptotic directions for some telescope configurations. 10 refs., 1 fig., 3 tabs

  20. Extensions to the coupling coefficient calculations for muon telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Baker, C P; Humble, J E [Tasmania Univ., Sandy Bay (Australia). Dept. of Physics; Duldig, M L [Dept. of the Arts, Sport, the Environment, Tourism and Territories, Hobart (Australia). Antarctic Div.

    1989-01-01

    The calculation of coupling coefficients for muon telescopes has previously used interpolation from a limited set of asymptotic directions of arrival of primary particles. Furthermore, these calculations have not incorporated curvature of the atmosphere and thus diverge from the true response at zenith angles greater than about 75 degrees. The necessary extensions to calculate coupling coefficients at arbitrary zenith angles are given, including an improved method of incorporating the asymptotic directions of the primary particles. It is shown, using this method, that certain coupling coefficients are highly sensitive to small changes in asymptotic directions for some telescope configurations. 10 refs., 1 fig., 3 tabs.

  1. Worldline calculation of the three-gluon vertex

    International Nuclear Information System (INIS)

    Ahmadiniaz, N.; Schubert, C.

    2012-01-01

    The three-gluon vertex is a basic object of interest in nonabelian gauge theory. At the one-loop level, it has been calculated and analyzed by a number of authors. Here we use the worldline formalism to unify the calculations of the scalar, spinor and gluon loop contributions to the one-loop vertex, leading to an extremely compact representation in terms of field strength tensors. We verify its equivalence with previously obtained representations, and explain the relation of its structure to the low-energy effective action. The sum rule found by Binger and Brodsky for the scalar, spinor and gluon loop contributions in the present approach relates to worldline supersymmetry.

  2. Predatory publishing and cybercrime targeting academics.

    Science.gov (United States)

    Umlauf, Mary Grace; Mochizuki, Yuki

    2018-04-01

    The purpose of this report is to inform and warn academics about practices used by cybercriminals who seek to profit from unwary scholars and undermine the industry of science. This report describes the signs, symptoms, characteristics, and consequences of predatory publishing and related forms of consumer fraud. Methods to curb these cybercrimes include educating scholars and students about tactics used by predatory publishers; institutional changes in how faculty are evaluated using publications; soliciting cooperation from the industries that support academic publishing and indexing to curb incorporation of illegitimate journals; and taking an offensive position by reporting these consumer fraud crimes to the authorities. Over and above the problem of publishing good science in fraudulent journals, disseminating and citing poor-quality research threaten the credibility of science and of nursing. © 2018 John Wiley & Sons Australia, Ltd.

  3. Graphical comparison of calculated internal conversion coefficients

    International Nuclear Information System (INIS)

    Ewbank, W.B.

    1980-11-01

    Calculated values of the coefficients of internal conversion of gamma rays in the K shell and L 1 , L 2 , L 3 subshells from published tabulations by Band and Trzhaskovskaya and by Roesel et al. at Data Nucl. Data Tables, 21, 92-514(1978) are compared with values obtained by computer interpolation among tabulated values of Hager and Seltzer Nucl. Data, A4, 1-235(1968). In some cases, agreement among the three calculations is remarkably good, and differences are generally less than 5%. In a few cases, there are differences as large as 20 to 50%, corresponding to the threshold effect described by Roesel et al. The Z-dependent resonance minimum described by Roesel et al. is also observed in the comparison of E1-E4 conversion in the L 1 subshell. In several cases (notably M1-M4 conversion in the K shell and L 1 subshell), the Band and Roesel calculations show dramatically different dependence on gamma energy and atomic number. For Z = 100, the Band calculation for E4 conversion in the L 3 subshell shows irregular behavior at energies below the K-shell binding energy. A few high-quality measurements of internal conversion coefficients (+-5%) would help greatly to establish a basis for choice among the theoretical calculations. 32 figures

  4. Different impact of aspirin on renal progression in patients with predialysis advanced chronic kidney disease with or without previous stroke.

    Science.gov (United States)

    Hsiao, Kuang-Chih; Huang, Jing-Yang; Lee, Chun-Te; Hung, Tung-Wei; Liaw, Yung-Po; Chang, Horng-Rong

    2017-04-01

    The benefit of reducing the risk of stroke against increasing the risk of renal progression associated with antiplatelet therapy in patients with advanced chronic kidney disease (CKD) is controversial. We enrolled 1301 adult patients with advanced CKD treated with erythropoiesis stimulating agents from January 1, 2002 to June 30, 2009 from the 2005 Longitudinal Health Insurance Database in Taiwan. All of the patients were followed until the development of the primary or secondary endpoints, or the end of the study (December 31, 2011). The primary endpoint was the development of ischemic stroke, and the secondary endpoints included hospitalization for bleeding events, cardiovascular mortality, all-cause mortality, and renal failure. The adjusted cumulative probability of events was calculated using multivariate Cox proportional regression analysis. Adjusted survival curves showed that the usage of aspirin was not associated with ischemic stroke, hospitalization for bleeding events, cardiovascular mortality or all-cause mortality, however, it was significantly associated with renal failure. In subgroup analysis, aspirin use was associated with renal failure in the patients with no history of stroke (HR, 1.41; 95% CI, 1.14-1.73), and there was a borderline interaction between previous stroke and the use of aspirin on renal failure (interaction p=0.0565). There was no significant benefit in preventing ischemic stroke in the patients with advanced CKD who received aspirin therapy. Furthermore, the use of aspirin was associated with the risk of renal failure in the patients with advanced CKD without previous stroke. Copyright © 2016 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

  5. Abortion and mental health: quantitative synthesis and analysis of research published 1995-2009.

    Science.gov (United States)

    Coleman, Priscilla K

    2011-09-01

    Given the methodological limitations of recently published qualitative reviews of abortion and mental health, a quantitative synthesis was deemed necessary to represent more accurately the published literature and to provide clarity to clinicians. To measure the association between abortion and indicators of adverse mental health, with subgroup effects calculated based on comparison groups (no abortion, unintended pregnancy delivered, pregnancy delivered) and particular outcomes. A secondary objective was to calculate population-attributable risk (PAR) statistics for each outcome. After the application of methodologically based selection criteria and extraction rules to minimise bias, the sample comprised 22 studies, 36 measures of effect and 877 181 participants (163 831 experienced an abortion). Random effects pooled odds ratios were computed using adjusted odds ratios from the original studies and PAR statistics were derived from the pooled odds ratios. Women who had undergone an abortion experienced an 81% increased risk of mental health problems, and nearly 10% of the incidence of mental health problems was shown to be attributable to abortion. The strongest subgroup estimates of increased risk occurred when abortion was compared with term pregnancy and when the outcomes pertained to substance use and suicidal behaviour. This review offers the largest quantitative estimate of mental health risks associated with abortion available in the world literature. Calling into question the conclusions from traditional reviews, the results revealed a moderate to highly increased risk of mental health problems after abortion. Consistent with the tenets of evidence-based medicine, this information should inform the delivery of abortion services.

  6. Free Publishing Culture. Sustainable Models?

    Directory of Open Access Journals (Sweden)

    Silvia Nanclares Escudero

    2013-03-01

    Full Text Available As a result of the collective research on the possibilities for publishing production and distribution offered nowadays by the Free Culture scenario, we present here a mapping of symptoms in order to propose a transitory diagnostic of the question: Is it possible to generate an economically sustainable publishing model based on the uses and customs generated and provided by Free Culture? Data, intuitions, experiences and ideas attempt to back up our affirmative answer.

  7. The number processing and calculation system: evidence from cognitive neuropsychology.

    Science.gov (United States)

    Salguero-Alcañiz, M P; Alameda-Bailén, J R

    2015-04-01

    Cognitive neuropsychology focuses on the concepts of dissociation and double dissociation. The performance of number processing and calculation tasks by patients with acquired brain injury can be used to characterise the way in which the healthy cognitive system manipulates number symbols and quantities. The objective of this study is to determine the components of the numerical processing and calculation system. Participants consisted of 6 patients with acquired brain injuries in different cerebral localisations. We used Batería de evaluación del procesamiento numérico y el cálculo, a battery assessing number processing and calculation. Data was analysed using the difference in proportions test. Quantitative numerical knowledge is independent from number transcoding, qualitative numerical knowledge, and calculation. Recodification is independent from qualitative numerical knowledge and calculation. Quantitative numerical knowledge and calculation are also independent functions. The number processing and calculation system comprises at least 4 components that operate independently: quantitative numerical knowledge, number transcoding, qualitative numerical knowledge, and calculation. Therefore, each one may be damaged selectively without affecting the functioning of another. According to the main models of number processing and calculation, each component has different characteristics and cerebral localisations. Copyright © 2013 Sociedad Española de Neurología. Published by Elsevier Espana. All rights reserved.

  8. Feasibility study on ductility exhaustion approach for creep-fatigue damage assessment of FBR 316 stainless steel using published data

    International Nuclear Information System (INIS)

    Nonaka, Isamu; Kitagawa, Masaki; Torihata, Shoji.

    1995-01-01

    In order to investigate the applicability of a ductility exhaustion rule to the creep-fatigue life assessment of FBR 316 stainless steel, a feasibility study using the published data was conducted. The assessment method was proposed based on the linear damage summation rule. In the proposed method, fatigue damage was calculated by Minor's rule and creep damage was calculated by a ductility exhaustion rule. The creep-fatigue lives in the published data were predicted by the proposed method. The results obtained are as follows: (1) All the data could be predicted within a factor of two on life by the proposed method. (2) The creep-fatigue lives under 10 minute strain hold at 550degC were overestimated, while those under 60 minute strain hold at 550degC and 600degC were estimated adequately. From the above facts, the proposed method seemed to be effective for the prediction of creep-fatigue life in which the creep damage was dominant and also the intergranular cracking was remarkable. (3) The creep damage was simultaneously calculated by the time fraction rule in order to compare with the ductility exhaustion role. All the data could be also predicted within a factor of two on life by this rule, but it tended to overestimate the life. (author)

  9. Efficiency of a bismuth-germanate scintillator: comparison of Monte Carlo calculations with measurements

    International Nuclear Information System (INIS)

    Hsu, H.H.; Dowdy, E.J.; Estes, G.P.; Lucas, M.C.; Mack, J.M.; Moss, C.E.; Hamm, M.E.

    1983-01-01

    Monte Carlo calculations of a bismuth-germanate scintillator's efficiency agree closely with experimental measurements. For this comparison, we studied the absolute gamma-ray photopeak efficiency of a scintillator (7.62 cm long by 7.62 cm in diameter) at several gamma-ray energies from 166 to 2615 keV at distances from 0.5 to 152.4 cm. Computer calculations were done in a two-dimensional cylindrical geometry with the Monte Carlo coupled photon-electron code CYLTRAN. For the experiment we measured 11 sources with simple spectra and precisely known strengths. The average deviation between the calculations and the measurements is 3%. Our calculated results also closely agree with recently published calculated results

  10. Electronic astronomical information handling and flexible publishing.

    Science.gov (United States)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists work and communicate. The concept of electronic information handling encompasses the diverse types of information, the different media, as well as the various communication methodologies and technologies. It ranges from the very collection of data until the final publication of results and sharing of knowledge. New problems and challenges result also from the new information culture, especially on legal, ethical, and educational grounds. Electronic publishing will have to diverge from an electronic version of contributions on paper and will be part of a more general flexible-publishing policy. The benefits of private publishing are questioned. The procedures for validating published material and for evaluating scientific activities will have to be adjusted too. Provision of electronic refereed information independently from commercial publishers in now feasible. Scientists and scientific institutions have now the possibility to run an efficient information server with validated (refereed) material without the help of a commercial publishers.

  11. Potentials for calculating both parity states in p-shell nuclei

    International Nuclear Information System (INIS)

    Resler, D.A.

    1989-01-01

    A Hamiltonian employing a ''physical'' central two-body potential has been used for simultaneous calculation of both normal and non-normal parity states of p-shell nuclei. Normal parity states have been calculated in a full 0/h bar/ω space and non-normal parity states in a full 1/h bar/ω space with the effects of spurious center-of-mass states completely removed. No explicit core is used in any of the shell model calculations. Results are compared with experimental data and previous shell model calculations for the following nuclei: 4 He, /sup 5,6,7,8/Li, 8 Be, /sup 13,14/C, and 13 N. 34 refs., 9 figs., 3 tabs

  12. Description of research design of articles published in four Brazilian physical therapy journals.

    Science.gov (United States)

    Saragiotto, Bruno T; Costa, Lucíola C M; Oliveira, Ronaldo F; Lopes, Alexandre D; Moseley, Anne M; Costa, Leonardo O P

    2014-01-01

    While the research design of articles published in medical journals and in some physical therapy journals has already been evaluated, this has not been investigated in Brazilian physical therapy journals. Objective : To describe the research design used in all articles published in Brazilian scientific journals that are freely available, have high Qualis rankings, and are relevant to physical therapy over a 7-year period. We extracted the bibliometric data, research design, research type (human or animal), and clinical area for all articles published. The articles were grouped into their level of evidence, and descriptive analyses were performed. We calculated the frequency, proportions of articles, and 95% confidence interval of these proportions with each research design in each journal. We cross-tabulated the clinical areas with research designs (expressed as number and percentages). A total of 1,458 articles from four Brazilian journals were found: Revista Brasileira de Fisioterapia, Revista Fisioterapia em Movimento, Revista Fisioterapia e Pesquisa, and Revista Acta Fisiátrica. The majority of articles were classified as level II of evidence (60%), followed by level III (29%) and level I (10%). The most prevalent research designs were cross-sectional studies (38%), single-case or case-series studies, and narrative reviews. Most articles reported human research and were in the musculoskeletal, neurologic, and cardiothoracic areas. Most of the research published in Brazilian physical therapy journals used levels II and III of evidence. Increasing the publication rate of systematic reviews and randomized controlled trials would provide more high-quality evidence to guide evidence-based physical therapy practice.

  13. Measurement errors in polymerase chain reaction are a confounding factor for a correct interpretation of 5-HTTLPR polymorphism effects on lifelong premature ejaculation: a critical analysis of a previously published meta-analysis of six studies.

    Science.gov (United States)

    Janssen, Paddy K C; Olivier, Berend; Zwinderman, Aeilko H; Waldinger, Marcel D

    2014-01-01

    To analyze a recently published meta-analysis of six studies on 5-HTTLPR polymorphism and lifelong premature ejaculation (PE). Calculation of fraction observed and expected genotype frequencies and Hardy Weinberg equilibrium (HWE) of cases and controls. LL,SL and SS genotype frequencies of patients were subtracted from genotype frequencies of an ideal population (LL25%, SL50%, SS25%, p = 1 for HWE). Analysis of PCRs of six studies and re-analysis of the analysis and Odds ratios (ORs) reported in the recently published meta-analysis. Three studies deviated from HWE in patients and one study deviated from HWE in controls. In three studies in-HWE the mean deviation of genotype frequencies from a theoretical population not-deviating from HWE was small: LL(1.7%), SL(-2.3%), SS(0.6%). In three studies not-in-HWE the mean deviation of genotype frequencies was high: LL(-3.3%), SL(-18.5%) and SS(21.8%) with very low percentage SL genotype concurrent with very high percentage SS genotype. The most serious PCR deviations were reported in the three not-in-HWE studies. The three in-HWE studies had normal OR. In contrast, the three not-in-HWE studies had a low OR. In three studies not-in-HWE and with very low OR, inadequate PCR analysis and/or inadequate interpretation of its gel electrophoresis resulted in very low SL and a resulting shift to very high SS genotype frequency outcome. Consequently, PCRs of these three studies are not reliable. Failure to note the inadequacy of PCR tests makes such PCRs a confounding factor in clinical interpretation of genetic studies. Currently, a meta-analysis can only be performed on three studies-in-HWE. However, based on the three studies-in-HWE with OR of about 1 there is not any indication that in men with lifelong PE the frequency of LL,SL and SS genotype deviates from the general male population and/or that the SL or SS genotype is in any way associated with lifelong PE.

  14. Parquet theory in nuclear structure calculations

    International Nuclear Information System (INIS)

    Bergli, Elise

    2010-01-01

    The thesis concerns a numerical implementation of the Parquet summation of diagrams within Green's functions theory applied to calculations of nuclear systems. The main motivation has been to investigate whether it is possible to develop this approach to a level comparable in accuracy and reliability to other ab initio nuclear structure methods. The Green's functions approach is theoretically well-established in many-body theory, but to our knowledge, no actual application to nuclear systems has been previously published. It has a number of desirable properties, foremost the gently scaling with system size compared to direct diagonalization and the closeness to experimentally accessible quantities. The main drawback is the numerical instabilities due to the pole structure of the one-particle propagator, leading to convergence difficulties. This issue is one of the main focal points of the work presented in this thesis, and strategies to improve the convergence properties are described and investigated. We have applied the method both to a simple model which can be solved by exact diagonalization and to the more realistic 4 He system. The results shows that our implementation is close to the exact solution in the simple model as long as the interaction strengths are small. As the number of particles increases, convergence is increasingly hard to obtain. In the 4 He case, we obtain results in the vicinity of the results from comparable approaches. The numerical in-stabilities in the current implementation still prevents the desired accuracy and stability necessary to achieve the current benchmark standards. (Author)

  15. I publish in I edit?--Do editorial board members of urologic journals preferentially publish their own scientific work?

    Science.gov (United States)

    Mani, Jens; Makarević, Jasmina; Juengel, Eva; Ackermann, Hanns; Nelson, Karen; Bartsch, Georg; Haferkamp, Axel; Blaheta, Roman A

    2013-01-01

    Scientists who are members of an editorial board have been accused of preferentially publishing their scientific work in the journal where they serve as editor. Reputation and academic standing do depend on an uninterrupted flow of published scientific work and the question does arise as to whether publication mainly occurs in the self-edited journal. This investigation was designed to determine whether editorial board members of five urological journals were more likely to publish their research reports in their own rather than in other journals. A retrospective analysis was conducted for all original reports published from 2001-2010 by 65 editorial board members nominated to the boards of five impact leading urologic journals in 2006. Publications before editorial board membership, 2001-2005, and publications within the period of time as an editorial board member, 2006-2010, were identified. The impact factors of the journals were also recorded over the time period 2001-2010 to see whether a change in impact factor correlated with publication locality. In the five journals as a whole, scientific work was not preferentially published in the journal in which the scientists served as editor. However, significant heterogeneity among the journals was evident. One journal showed a significant increase in the amount of published papers in the 'own' journal after assumption of editorship, three journals showed no change and one journal showed a highly significant decrease in publishing in the 'own' journal after assumption of editorship.

  16. Mechanical stress calculations for toroidal field coils by the finite element method

    International Nuclear Information System (INIS)

    Soell, M.; Jandl, O.; Gorenflo, H.

    1976-09-01

    After discussing fundamental relationships of the finite element method, this report describes the calculation steps worked out for mechanical stress calculations in the case of magnetic forces and forces produced by thermal expansion or compression of toroidal field coils using the SOLID SAP IV computer program. The displacement and stress analysis are based on the 20-node isoparametric solid element. The calculation of the nodal forces produced by magnetic body forces are discussed in detail. The computer programs, which can be used generally for mesh generation and determination of the nodal forces, are published elsewhere. (orig.) [de

  17. Calculation of dose point kernels for five radionuclides used in radio-immunotherapy

    International Nuclear Information System (INIS)

    Okigaki, S.; Ito, A.; Uchida, I.; Tomaru, T.

    1994-01-01

    With the recent interest in radioimmunotherapy, attention has been given to calculation of dose distribution from beta rays and monoenergetic electrons in tissue. Dose distribution around a point source of a beta ray emitting radioisotope is referred to as a beta dose point kernel. Beta dose point kernels for five radionuclides such as 131 I, 186 Re, 32 P, 188 Re, and 90 Y appropriate for radioimmunotherapy are calculated by Monte Carlo method using the EGS4 code system. Present results were compared with the published data of experiments and other calculations. Accuracy and precisions of beta dose point kernels are discussed. (author)

  18. Preparing and Publishing a Scientific Manuscript

    Directory of Open Access Journals (Sweden)

    Padma R Jirge

    2017-01-01

    Full Text Available Publishing original research in a peer-reviewed and indexed journal is an important milestone for a scientist or a clinician. It is an important parameter to assess academic achievements. However, technical and language barriers may prevent many enthusiasts from ever publishing. This review highlights the important preparatory steps for creating a good manuscript and the most widely used IMRaD (Introduction, Materials and Methods, Results, and Discussion method for writing a good manuscript. It also provides a brief overview of the submission and review process of a manuscript for publishing in a biomedical journal.

  19. Detection limit calculations for different total reflection techniques

    International Nuclear Information System (INIS)

    Sanchez, H.J.

    2000-01-01

    In this work, theoretical calculations of detection limits for different total-reflection techniques are presented.. Calculations include grazing incidence (TXRF) and gracing exit (GEXRF) conditions. These calculations are compared with detection limits obtained for conventional x-ray fluorescence (XRF). In order to compute detection limits the Shiraiwa and Fujino's model to calculate x-ray fluorescence intensities was used. This model made certain assumptions and approximations to achieve the calculations, specially in the case of the geometrical conditions of the sample, and the incident and takeoff beams. Nevertheless the calculated data of detection limits for conventional XRF and total-reflection XRF show a good agreement with previous results. The model proposed here allows to analyze the different sources of background and the influence of the excitation geometry, which contribute to the understanding of the physical processes involved in the XRF analysis by total reflection. Finally, a comparison between detection limits in total-reflection analysis at grazing incidence and at grazing exit is carried out. Here a good agreement with the theoretical predictions of the reversibility principle is found, showing that detection limits are similar for both techniques. (author)

  20. First principles calculations for interaction of tyrosine with (ZnO)3 cluster

    Science.gov (United States)

    Singh, Satvinder; Singh, Gurinder; Kaura, Aman; Tripathi, S. K.

    2018-04-01

    First Principles Calculations have been performed to study interactions of Phenol ring of Tyrosine (C6H5OH) with (ZnO)3 atomic cluster. All the calculations have been performed under the Density Functional Theory (DFT) framework. Structural and electronic properties of (ZnO)3/C6H5OH have been studied. Gaussian basis set approach has been adopted for the calculations. A ring type most stable (ZnO)3 atomic cluster has been modeled, analyzed and used for the calculations. The compatibility of the results with previous studies has been presented here.

  1. EDITORIAL: Roberts Prize for the best paper published in 2010 Roberts Prize for the best paper published in 2010

    Science.gov (United States)

    Webb, Steve; Harris, Simon

    2011-08-01

    The publishers of Physics in Medicine and Biology (PMB), IOP Publishing, in association with the journal owners, the Institute of Physics and Engineering in Medicine (IPEM), jointly award an annual prize for the best paper published in PMB during the previous year. The procedure for deciding the winner has been made as thorough as possible, to try to ensure that an outstanding paper wins the prize. We started off with a shortlist of the 10 research papers published in 2010 which were rated the best based on the referees' quality assessments. Following the submission of a short 'case for winning' document by each of the shortlisted authors, an IPEM college of jurors of the status of FIPEM assessed and rated these 10 papers in order to choose a winner, which was then endorsed by the Editorial Board. We have much pleasure in advising readers that the Roberts Prize for the best paper published in 2010 is awarded to M M Paulides et al from Erasmus MC, Rotterdam, The Netherlands, for their paper on hyperthermia treatment: The clinical feasibility of deep hyperthermia treatment in the head and neck: new challenges for positioning and temperature measurement M M Paulides, J F Bakker, M Linthorst, J van der Zee, Z Rijnen, E Neufeld, P M T Pattynama, P P Jansen, P C Levendag and G C van Rhoon 2010 Phys. Med. Biol. 55 2465 Our congratulations go to these authors. Of course all of the shortlisted papers were of great merit, and the full top-10 is listed below (in alphabetical order). Steve Webb Editor-in-Chief Simon Harris Publisher References Alonzo-Proulx O, Packard N, Boone J M, Al-Mayah A, Brock K K, Shen S Z and Yaffe M J 2010 Validation of a method for measuring the volumetric breast density from digital mammograms Phys. Med. Biol. 55 3027 Bian J, Siewerdsen J H, Han X, Sidky E Y, Prince J L, Pelizzari C A and Pan X 2010 Evaluation of sparse-view reconstruction from flat-panel-detector cone-beam CT Phys. Med. Biol. 55 6575 Brun M-A, Formanek F, Yasuda A, Sekine M, Ando N

  2. Issues in Electronic Publishing.

    Science.gov (United States)

    Meadow, Charles T.

    1997-01-01

    Discusses issues related to electronic publishing. Topics include writing; reading; production, distribution, and commerce; copyright and ownership of intellectual property; archival storage; technical obsolescence; control of content; equality of access; and cultural changes. (Author/LRW)

  3. Statistical theory for calculating energy spectra of β-delayed neutrons

    International Nuclear Information System (INIS)

    Kawano, Toshihiko; Moeller, Peter; Wilson, William B.

    2008-01-01

    Theoretical β-delayed neutron spectra are calculated based on the Quasi-particle Random Phase Approximation (QRPA) and the Hauser-Feshbach statistical model. Neutron emissions from an excited daughter nucleus after β-decay to the granddaughter residual are more accurately calculated than previous evaluations, including all the microscopic nuclear structure information, such as a Gamow-Teller strength distribution and discrete states in the granddaughter. The calculated delayed-neutron spectra reasonably agree with those evaluations in the ENDF decay library, which are based on experimental data. The model was adopted to generate the delayed-neutron spectra for all 271 precursors. (authors)

  4. Structure and navigation for electronic publishing

    Science.gov (United States)

    Tillinghast, John; Beretta, Giordano B.

    1998-01-01

    The sudden explosion of the World Wide Web as a new publication medium has given a dramatic boost to the electronic publishing industry, which previously was a limited market centered around CD-ROMs and on-line databases. While the phenomenon has parallels to the advent of the tabloid press in the middle of last century, the electronic nature of the medium brings with it the typical characteristic of 4th wave media, namely the acceleration in its propagation speed and the volume of information. Consequently, e-publications are even flatter than print media; Shakespeare's Romeo and Juliet share the same computer screen with a home-made plagiarized copy of Deep Throat. The most touted tool for locating useful information on the World Wide Web is the search engine. However, due to the medium's flatness, sought information is drowned in a sea of useless information. A better solution is to build tools that allow authors to structure information so that it can easily be navigated. We experimented with the use of ontologies as a tool to formulate structures for information about a specific topic, so that related concepts are placed in adjacent locations and can easily be navigated using simple and ergonomic user models. We describe our effort in building a World Wide Web based photo album that is shared among a small network of people.

  5. New journals for publishing medical case reports.

    Science.gov (United States)

    Akers, Katherine G

    2016-04-01

    Because they do not rank highly in the hierarchy of evidence and are not frequently cited, case reports describing the clinical circumstances of single patients are seldom published by medical journals. However, many clinicians argue that case reports have significant educational value, advance medical knowledge, and complement evidence-based medicine. Over the last several years, a vast number (∼160) of new peer-reviewed journals have emerged that focus on publishing case reports. These journals are typically open access and have relatively high acceptance rates. However, approximately half of the publishers of case reports journals engage in questionable or "predatory" publishing practices. Authors of case reports may benefit from greater awareness of these new publication venues as well as an ability to discriminate between reputable and non-reputable journal publishers.

  6. Open Access, data capitalism and academic publishing.

    Science.gov (United States)

    Hagner, Michael

    2018-02-16

    Open Access (OA) is widely considered a breakthrough in the history of academic publishing, rendering the knowledge produced by the worldwide scientific community accessible to all. In numerous countries, national governments, funding institutions and research organisations have undertaken enormous efforts to establish OA as the new publishing standard. The benefits and new perspectives, however, cause various challenges. This essay addresses several issues, including that OA is deeply embedded in the logic and practices of data capitalism. Given that OA has proven an attractive business model for commercial publishers, the key predictions of OA-advocates, namely that OA would liberate both scientists and tax payers from the chains of global publishing companies, have not become true. In its conclusion, the paper discusses the opportunities and pitfalls of non-commercial publishing.

  7. Electronic Publishing: Introduction to This Issue.

    Science.gov (United States)

    Siegel, Martin A.

    1994-01-01

    Provides an overview of this special issue that addresses the possibilities and implications of electronic publishing and information dissemination as key components of effective education. Highlights include the theory and framework of electronic publishing; differences between electronic text and print; development of new educational materials;…

  8. Sisyphus desperately seeking publisher

    Indian Academy of Sciences (India)

    Antoinette Molinié

    The editors wield their Olympian authority by making today's scientists endlessly push their weighty boulders up ... since publishing has become a highly lucrative business. ... estimate that the richest 8.4 % own 83.3 % (see Global Wealth.

  9. Desktop Publishing in Libraries.

    Science.gov (United States)

    Cisler, Steve

    1987-01-01

    Describes the components, costs, and capabilities of several desktop publishing systems, and examines their possible impact on work patterns within organizations. The text and graphics of the article were created using various microcomputer software packages. (CLB)

  10. Web-based magazine design for self publishers

    Science.gov (United States)

    Hunter, Andrew; Slatter, David; Greig, Darryl

    2011-03-01

    Short run printing technology and web services such as MagCloud provide new opportunities for long-tail magazine publishing. They enable self publishers to supply magazines to a wide range of communities, including groups that are too small to be viable as target communities for conventional publishers. In a Web 2.0 world where users constantly discover new services and where they may be infrequent patrons of any single service, it is unreasonable to expect users to learn the complex service behaviors. Furthermore, we want to open up publishing opportunities to novices who are unlikely to have prior experience of publishing and who lack design expertise. Magazine design automation is an ambitious goal, but recent progress with another web service, Autophotobook, proves that some level of automation of publication design is feasible. This paper describes our current research effort to extend the automation capabilities of Autophotobook to address the issues of magazine design so that we can provide a service to support professional-quality self publishing by novice users for a wide range of community types and sizes.

  11. [Relationship between previous severity of illness and outcome of in-hospital cardiac arrest].

    Science.gov (United States)

    Serrano, M; Rodríguez, J; Espejo, A; del Olmo, R; Llanos, S; Del Castillo, J; López-Herce, J

    2014-07-01

    To analyze the relationship between previous severity of illness, lactic acid, creatinine and inotropic index with mortality of in-hospital cardiac arrest (CA) in children, and the value of a prognostic index designed for adults. The study included total of 44 children aged from 1 month to 18 years old who suffered a cardiac arrest while in hospital. The relationship between previous severity of illness scores (PRIMS and PELOD), lactic acid, creatinine, treatment with vasoactive drugs, inotropic index with return of spontaneous circulation and survival at hospital discharge was analyzed. The large majority (90.3%) of patients had a return of spontaneous circulation, and 59% survived at hospital discharge. More than two-thirds (68.2%) were treated with inotropic drugs at the time of the CA. The patients who died had a higher lactic acid before the CA (3.4 mmol/L) than survivors (1.4 mmol/L), P=.04. There were no significant differences in PRIMS, PELOD, creatinine, inotropic drugs, and inotropic index before CA between patients who died and survivors. A high lactic acid previous to cardiac arrest could be a prognostic factor of in-hospital cardiac arrest in children. Copyright © 2013 Asociación Española de Pediatría. Published by Elsevier Espana. All rights reserved.

  12. Desktop Publishing for the Gifted/Talented.

    Science.gov (United States)

    Hamilton, Wayne

    1987-01-01

    Examines the nature of desktop publishing and how it can be used in the classroom for gifted/talented students. Characteristics and special needs of such students are identified, and it is argued that desktop publishing addresses those needs, particularly with regard to creativity. Twenty-six references are provided. (MES)

  13. Publishers' Sales Strategies: A Questionable Business.

    Science.gov (United States)

    Eaglen, Audrey B.

    1988-01-01

    Speed, fill rate, and discount are reasons why it is often preferable for libraries to order directly from publishers rather than through a distributor. Nevertheless, some publishers have decided not to accept orders from libraries and schools. This has had a deleterious effect on libraries and library collections. (MES)

  14. Reactor Thermal Hydraulic Numerical Calculation And Modeling

    International Nuclear Information System (INIS)

    Duong Ngoc Hai; Dang The Ba

    2008-01-01

    In the paper the results of analysis of thermal hydraulic state models using the numerical codes such as COOLOD, EUREKA and RELAP5 for simulation of the reactor thermal hydraulic states are presented. The calculations, analyses of reactor thermal hydraulic state and safety were implemented using different codes. The received numerical results, which were compared each to other, to experiment measurement of Dalat (Vietnam) research reactor and published results, show their appropriateness and capacity for analyses of different appropriate cases. (author)

  15. The Library as Publisher.

    Science.gov (United States)

    Field, Roy

    1979-01-01

    Presents a guide to for-profit library publishing of reprints, original manuscripts, and smaller items. Discussed are creation of a publications panel to manage finances and preparation, determining prices of items, and drawing up author contracts. (SW)

  16. Short communications published online in the British Journal of Oral and Maxillofacial Surgery during 2010-2011.

    Science.gov (United States)

    Colbert, S; Southorn, B; Rosenbaum, G; Aldridge, T; Brennan, P A

    2012-09-01

    The British Journal of Oral and Maxillofacial Surgery (BJOMS) publishes many types of papers including original articles, review articles, and short communications. Many of the latter are isolated case reports of rare or interesting diseases or of difficult or unexpected complications. While case reports are sometimes considered to be of little educational or clinical value, and as such do little to advance medical knowledge, they do have an important role, and many trainees begin their publishing careers writing such papers. There is increasing pressure for space in paper medical journals and, for this reason, some journals either limit or do not publish short publications in print copy but instead put them online. Using established criteria, we previously evaluated all 142 short communications published in the BJOMS during 2008-2009 and found that 48% of them had little or no educational value. As a result, the editorial board of BJOMS took the decision to publish most short communications online only. We have now analysed 48 short communications that were published online only during 2010-2011. Most (80%) were single case reports that covered virtually the whole remit of the specialty, and over half (56%) were published by authors based in the UK. While many of these papers did not add important new information to existing knowledge, these types of article are clearly of value both for trainees and for experienced surgeons. We think that these should continue to be supported as, in addition to their educational value, they are an excellent way for trainees to start to write. Copyright © 2012 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  17. Electronic publishing and intelligent information retrieval

    Science.gov (United States)

    Heck, A.

    1992-01-01

    Europeans are now taking steps to homogenize policies and standardize procedures in electronic publishing (EP) in astronomy and space sciences. This arose from an open meeting organized in Oct. 1991 at Strasbourg Observatory (France) and another business meeting held late Mar. 1992 with the major publishers and journal editors in astronomy and space sciences. The ultimate aim of EP might be considered as the so-called 'intelligent information retrieval' (IIR) or better named 'advanced information retrieval' (AIR), taking advantage of the fact that the material to be published appears at some stage in a machine-readable form. It is obvious that the combination of desktop and electronic publishing with networking and new structuring of knowledge bases will profoundly reshape not only our ways of publishing, but also our procedures of communicating and retrieving information. It should be noted that a world-wide survey among astronomers and space scientists carried out before the October 1991 colloquium on the various packages and machines used, indicated that TEX-related packages were already in majoritarian use in our community. It has also been stressed at each meeting that the European developments should be carried out in collaboration with what is done in the US (STELLAR project, for instance). American scientists and journal editors actually attended both meetings mentioned above. The paper will offer a review of the status of electronic publishing in astronomy and its possible contribution to advanced information retrieval in this field. It will also report on recent meetings such as the 'Astronomy from Large Databases-2 (ALD-2)' conference dealing with the latest developments in networking, in data, information, and knowledge bases, as well as in the related methodologies.

  18. Survival of dental implants placed in sites of previously failed implants.

    Science.gov (United States)

    Chrcanovic, Bruno R; Kisch, Jenö; Albrektsson, Tomas; Wennerberg, Ann

    2017-11-01

    To assess the survival of dental implants placed in sites of previously failed implants and to explore the possible factors that might affect the outcome of this reimplantation procedure. Patients that had failed dental implants, which were replaced with the same implant type at the same site, were included. Descriptive statistics were used to describe the patients and implants; survival analysis was also performed. The effect of systemic, environmental, and local factors on the survival of the reoperated implants was evaluated. 175 of 10,096 implants in 98 patients were replaced by another implant at the same location (159, 14, and 2 implants at second, third, and fourth surgeries, respectively). Newly replaced implants were generally of similar diameter but of shorter length compared to the previously placed fixtures. A statistically significant greater percentage of lost implants were placed in sites with low bone quantity. There was a statistically significant difference (P = 0.032) in the survival rates between implants that were inserted for the first time (94%) and implants that replaced the ones lost (73%). There was a statistically higher failure rate of the reoperated implants for patients taking antidepressants and antithrombotic agents. Dental implants replacing failed implants had lower survival rates than the rates reported for the previous attempts of implant placement. It is suggested that a site-specific negative effect may possibly be associated with this phenomenon, as well as the intake of antidepressants and antithrombotic agents. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. Where is smoking research published?

    Science.gov (United States)

    Liguori, A.; Hughes, J. R.

    1996-01-01

    OBJECTIVE: To identify journals that have a focus on human nicotine/smoking research and to investigate the coverage of smoking in "high-impact" journals. DESIGN: The MEDLINE computer database was searched for English-language articles on human studies published in 1988-1992 using "nicotine", "smoking", "smoking cessation", "tobacco", or "tobacco use disorder" as focus descriptors. This search was supplemented with a similar search of the PSYCLIT computer database. Fifty-eight journals containing at least 20 nicotine/smoking articles over the five years were analysed for impact factor (IF; citations per article). RESULTS: Among the journals with the highest percentage of nicotine- or smoking-focused articles (that is, 9-39% of their articles were on nicotine/smoking), Addiction, American Journal of Public Health, Cancer Causes and Control, Health Psychology, and Preventive Medicine had the greatest IF (range = 1.3-2.6). Among the journals highest in impact factor (IF > 3), only American Journal of Epidemiology, American Review of Respiratory Disease, Journal of the National Cancer Institute, and Journal of the American Medical Association published more than 10 nicotine/smoking articles per year (3-5% of all articles). Of these, only Journal of the American Medical Association published a large number of nicotine/smoking articles (32 per year). CONCLUSIONS: Although smoking causes 20% of all mortality in developed countries, the topic is not adequately covered in high-impact journals. Most smoking research is published in low-impact journals. 




 PMID:8795857

  20. Mergers, Acquisitions, and Access: STM Publishing Today

    Science.gov (United States)

    Robertson, Kathleen

    Electronic publishing is changing the fundamentals of the entire printing/delivery/archive system that has served as the distribution mechanism for scientific research over the last century and a half. The merger-mania of the last 20 years, preprint pools, and publishers' licensing and journals-bundling plans are among the phenomena impacting the scientific information field. Science-Technology-Medical (STM) publishing is experiencing a period of intense consolidation and reorganization. This paper gives an overview of the economic factors fueling these trends, the major STM publishers, and the government regulatory bodies that referee this industry in Europe, Canada, and the USA.

  1. Methodology for calculation of doses to man and implementation in Pandora

    International Nuclear Information System (INIS)

    Avila, R.; Bergstroem, U.

    2006-07-01

    This report describes methods and data for calculation of doses to man to be used in safety assessments of repositories for nuclear fuel. The methods are based on the latest recommendations from the ICRP, the EU and the national radiation protection authorities. Equations are given for calculation of doses from ingestion of contaminated water and food, inhalation of contaminated air and external exposure from radionuclides in the ground. With the exception of the exposure from food ingestion, the equations are the same used in previous safety assessments. A general equation is suggested for estimation of the exposure from food ingestion, in which the annual demand of carbon is used instead of the annual ingestion of different foodstuffs, which was earlier applied. The report contains tables with recommended values for physiological characteristics such as water intake, food intake and inhalation rates, based on information summarised in an Appendix. Furthermore, tables are given with recommended age dependent dose conversion factors for ingestion and inhalation for a number of nuclides of interest for safety assessments. The most recently published dose conversion factors for external exposure from contaminated ground are also given. An overview of the implementation of the methodology in Pandora, which is the tool that Posiva and SKB currently use for biosphere modelling, is also provided. The work presented in the report is a result from a joint project commissioned by Svensk Kaernbraenslehantering AB (SKB) and Posiva. The report will be printed also as a SKB report R-06-68. (orig.)

  2. One-loop calculations in QED in axial gauge

    International Nuclear Information System (INIS)

    Boos, E.E.; Kurannoy, S.S.

    1983-01-01

    The present paper pursued the aim to test at the simple example of the calculation of the anomalous magnetic moment in quantum electrodynamics the methods of calculating one-loop integrals in the axial gauge, using the dimensional regularization, and to investigate the independence of the results on the choice of the recipe of how to treat the poles in the denominators (k eta) -1 . It is shown that the techniques developed in another paper, as well as in the present paper, can be successfully applied in such calculations, in spite of the peculiarities of the axial gauge that have been discussed previously. The results of the two different ways of treating singularities (k eta) -1 (the principal value and 't Hooft's prescription) turn out to be equal. At the same time it was verified that the Green functions obtained by these calculations near the mass shell in the one-loop approximation satisfy the ward identity

  3. The Ins and the Outs of Electronic Publishing.

    Science.gov (United States)

    Wills, Mathew; Wills, Gordon

    1996-01-01

    Examines electronic publishing for academic and professional publishers. Discusses benefits of electronic publishing to authors and readers, argues that the hard sell and product-driven mindsets will not work in a customer-focused communications medium, and outlines characteristics of electronic publishing that must be incorporated in successful…

  4. [SciELO: method for electronic publishing].

    Science.gov (United States)

    Laerte Packer, A; Rocha Biojone, M; Antonio, I; Mayumi Takemaka, R; Pedroso García, A; Costa da Silva, A; Toshiyuki Murasaki, R; Mylek, C; Carvalho Reisl, O; Rocha F Delbucio, H C

    2001-01-01

    It describes the SciELO Methodology Scientific Electronic Library Online for electronic publishing of scientific periodicals, examining issues such as the transition from traditional printed publication to electronic publishing, the scientific communication process, the principles which founded the methodology development, its application in the building of the SciELO site, its modules and components, the tools use for its construction etc. The article also discusses the potentialities and trends for the area in Brazil and Latin America, pointing out questions and proposals which should be investigated and solved by the methodology. It concludes that the SciELO Methodology is an efficient, flexible and wide solution for the scientific electronic publishing.

  5. 20 CFR 902.3 - Published information.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Published information. 902.3 Section 902.3 Employees' Benefits JOINT BOARD FOR THE ENROLLMENT OF ACTUARIES RULES REGARDING AVAILABILITY OF INFORMATION § 902.3 Published information. (a) Federal Register. Pursuant to sections 552 and 553 of title 5 of the...

  6. Laparoscopy After Previous Laparotomy

    Directory of Open Access Journals (Sweden)

    Zulfo Godinjak

    2006-11-01

    Full Text Available Following the abdominal surgery, extensive adhesions often occur and they can cause difficulties during laparoscopic operations. However, previous laparotomy is not considered to be a contraindication for laparoscopy. The aim of this study is to present that an insertion of Veres needle in the region of umbilicus is a safe method for creating a pneumoperitoneum for laparoscopic operations after previous laparotomy. In the last three years, we have performed 144 laparoscopic operations in patients that previously underwent one or two laparotomies. Pathology of digestive system, genital organs, Cesarean Section or abdominal war injuries were the most common causes of previouslaparotomy. During those operations or during entering into abdominal cavity we have not experienced any complications, while in 7 patients we performed conversion to laparotomy following the diagnostic laparoscopy. In all patients an insertion of Veres needle and trocar insertion in the umbilical region was performed, namely a technique of closed laparoscopy. Not even in one patient adhesions in the region of umbilicus were found, and no abdominal organs were injured.

  7. Behind the Spam: A ``Spectral Analysis'' of Predatory Publishers

    Science.gov (United States)

    Beall, Jeffrey

    2016-10-01

    Most researchers today are bombarded with spam email solicitations from questionable scholarly publishers. These emails solicit article manuscripts, editorial board service, and even ad hoc peer reviews. These ``predatory'' publishers exploit the scholarly publishing process, patterning themselves after legitimate scholarly publishers yet performing little or no peer review and quickly accepting submitted manuscripts and collecting fees from submitting authors. These counterfeit publishers and journals have published much junk science? especially in the field of cosmology? threatening the integrity of the academic record. This paper examines the current state of predatory publishing and advises researchers how to navigate scholarly publishing to best avoid predatory publishers and other scholarly publishing-related perils.

  8. Structural revision of some recently published iridoid glucosides.

    Science.gov (United States)

    Jensen, Søren R; Caliş, Ihsan; Gotfredsen, Charlotte H; Søtofte, Inger

    2007-01-01

    The structures of six different iridoid glucosides have been revised. Three compounds isolated from Eremostachys glabra and designated 6,9-epi-8-O-acetylshanziside (1), 5,9-epi-penstemoside (2), and 5,9-epi-7,8-didehydropenstemoside (3) have been shown to be identical to the known iridoids barlerin (4, 8-O-acetylshanziside), penstemoside (5), and 7,8-didehydropenstemoside (6), respectively. Another compound named harpagoside-B, isolated from Scrophularia deserti and proposed to be 9-epi-6-O-methylharpagoside (11), was demonstrated from the spectroscopic data given to be the known harpagoside (10b). Finally, two alleged iridoid galactosides from Buddleja crispa named buddlejosides A and B (12a and 12b) have been shown to be the corresponding glucosides; the former is identical to agnuside (13a), while the latter is 3,4-dihydroxybenzoylaucubin (13b), an iridoid glucoside not previously published. This clearly showed that care should be taken with the interpretation of NOEs involving bridgehead protons in iridoid structures because they can be capricious and lead to erroneous structural assignments.

  9. Music Consumption and Publishing in Todays Music Industry : Music publishing for an independent record label

    OpenAIRE

    Pienimäki, Kristian

    2015-01-01

    For the last two decades the changes in music technology and music consumption have affected music publishing as well as its viability. Much due to music digitalization and the overall decline in physical sales, the music industry has been forced to re-evaluate the means of publishing. The topic of the thesis is of current interest since the music industry is still in the state of change and new research is important. The thesis was assigned by an independent record label called Meiän Mu...

  10. Scientific publishing: some food for thought

    Directory of Open Access Journals (Sweden)

    Vittorio Bo

    2007-03-01

    Full Text Available Scientific publishing, here to be considered in a broader sense, as publishing of both specialised scientific journals and science popularisation works addressed to a wider audience, has been sailing for some years on troubled waters. To gather some possible food for thought is the purpose of this brief article.

  11. Publisher Correction: Invisible Trojan-horse attack

    DEFF Research Database (Denmark)

    Sajeed, Shihan; Minshull, Carter; Jain, Nitin

    2017-01-01

    A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.......A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper....

  12. Hybrid reduced order modeling for assembly calculations

    Energy Technology Data Exchange (ETDEWEB)

    Bang, Youngsuk, E-mail: ysbang00@fnctech.com [FNC Technology, Co. Ltd., Yongin-si (Korea, Republic of); Abdel-Khalik, Hany S., E-mail: abdelkhalik@purdue.edu [Purdue University, West Lafayette, IN (United States); Jessee, Matthew A., E-mail: jesseema@ornl.gov [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Mertyurek, Ugur, E-mail: mertyurek@ornl.gov [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    2015-12-15

    Highlights: • Reducing computational cost in engineering calculations. • Reduced order modeling algorithm for multi-physics problem like assembly calculation. • Non-intrusive algorithm with random sampling. • Pattern recognition in the components with high sensitive and large variation. - Abstract: While the accuracy of assembly calculations has considerably improved due to the increase in computer power enabling more refined description of the phase space and use of more sophisticated numerical algorithms, the computational cost continues to increase which limits the full utilization of their effectiveness for routine engineering analysis. Reduced order modeling is a mathematical vehicle that scales down the dimensionality of large-scale numerical problems to enable their repeated executions on small computing environment, often available to end users. This is done by capturing the most dominant underlying relationships between the model's inputs and outputs. Previous works demonstrated the use of the reduced order modeling for a single physics code, such as a radiation transport calculation. This manuscript extends those works to coupled code systems as currently employed in assembly calculations. Numerical tests are conducted using realistic SCALE assembly models with resonance self-shielding, neutron transport, and nuclides transmutation/depletion models representing the components of the coupled code system.

  13. Hybrid reduced order modeling for assembly calculations

    International Nuclear Information System (INIS)

    Bang, Youngsuk; Abdel-Khalik, Hany S.; Jessee, Matthew A.; Mertyurek, Ugur

    2015-01-01

    Highlights: • Reducing computational cost in engineering calculations. • Reduced order modeling algorithm for multi-physics problem like assembly calculation. • Non-intrusive algorithm with random sampling. • Pattern recognition in the components with high sensitive and large variation. - Abstract: While the accuracy of assembly calculations has considerably improved due to the increase in computer power enabling more refined description of the phase space and use of more sophisticated numerical algorithms, the computational cost continues to increase which limits the full utilization of their effectiveness for routine engineering analysis. Reduced order modeling is a mathematical vehicle that scales down the dimensionality of large-scale numerical problems to enable their repeated executions on small computing environment, often available to end users. This is done by capturing the most dominant underlying relationships between the model's inputs and outputs. Previous works demonstrated the use of the reduced order modeling for a single physics code, such as a radiation transport calculation. This manuscript extends those works to coupled code systems as currently employed in assembly calculations. Numerical tests are conducted using realistic SCALE assembly models with resonance self-shielding, neutron transport, and nuclides transmutation/depletion models representing the components of the coupled code system.

  14. Low-dose computed tomography image restoration using previous normal-dose scan

    International Nuclear Information System (INIS)

    Ma, Jianhua; Huang, Jing; Feng, Qianjin; Zhang, Hua; Lu, Hongbing; Liang, Zhengrong; Chen, Wufan

    2011-01-01

    Purpose: In current computed tomography (CT) examinations, the associated x-ray radiation dose is of a significant concern to patients and operators. A simple and cost-effective means to perform the examinations is to lower the milliampere-seconds (mAs) or kVp parameter (or delivering less x-ray energy to the body) as low as reasonably achievable in data acquisition. However, lowering the mAs parameter will unavoidably increase data noise and the noise would propagate into the CT image if no adequate noise control is applied during image reconstruction. Since a normal-dose high diagnostic CT image scanned previously may be available in some clinical applications, such as CT perfusion imaging and CT angiography (CTA), this paper presents an innovative way to utilize the normal-dose scan as a priori information to induce signal restoration of the current low-dose CT image series. Methods: Unlike conventional local operations on neighboring image voxels, nonlocal means (NLM) algorithm utilizes the redundancy of information across the whole image. This paper adapts the NLM to utilize the redundancy of information in the previous normal-dose scan and further exploits ways to optimize the nonlocal weights for low-dose image restoration in the NLM framework. The resulting algorithm is called the previous normal-dose scan induced nonlocal means (ndiNLM). Because of the optimized nature of nonlocal weights calculation, the ndiNLM algorithm does not depend heavily on image registration between the current low-dose and the previous normal-dose CT scans. Furthermore, the smoothing parameter involved in the ndiNLM algorithm can be adaptively estimated based on the image noise relationship between the current low-dose and the previous normal-dose scanning protocols. Results: Qualitative and quantitative evaluations were carried out on a physical phantom as well as clinical abdominal and brain perfusion CT scans in terms of accuracy and resolution properties. The gain by the use

  15. Effects of tropospheric aerosols on radiative flux calculations at UV and visible wavelengths

    International Nuclear Information System (INIS)

    Grossman, A.S.; Grant, K.E.

    1994-08-01

    The surface fluxes in the wavelength range 175 to 735nm have been calculated for an atmosphere which contains a uniformly mixed aerosol layer of thickness 1km at the earth's surface. Two different aerosol types were considered, a rural aerosol, and an urban aerosol. The visibility range for the aerosol layers was 95 to 15 km. Surface flux ratios (15km/95km) were in agreement with previously published results for the rural aerosol layer to within about 2%. The surface flux ratios vary from 7 to 14% for the rural aerosol layer and from 13 to 23% for the urban aerosol layer over the wavelength range. A tropospheric radiative forcing of about 1.3% of the total tropospheric flux was determined for the 95km to 15km visibility change in the rural aerosol layer, indicating the potential of tropospheric feedback effects on the surface flux changes. This effect was found to be negligible for the urban aerosol layer. Stratospheric layer heating rate changes due to visibility changes in either the rural or urban aerosol layer were found to be negligible

  16. Open Access Publishing: What Authors Want

    Science.gov (United States)

    Nariani, Rajiv; Fernandez, Leila

    2012-01-01

    Campus-based open access author funds are being considered by many academic libraries as a way to support authors publishing in open access journals. Article processing fees for open access have been introduced recently by publishers and have not yet been widely accepted by authors. Few studies have surveyed authors on their reasons for publishing…

  17. Formation of decontamination cost calculation model for severe accident consequence assessment

    International Nuclear Information System (INIS)

    Silva, Kampanart; Promping, Jiraporn; Okamoto, Koji; Ishiwatari, Yuki

    2014-01-01

    In previous studies, the authors developed an index “cost per severe accident” to perform a severe accident consequence assessment that can cover various kinds of accident consequences, namely health effects, economic, social and environmental impacts. Though decontamination cost was identified as a major component, it was taken into account using simple and conservative assumptions, which make it difficult to have further discussions. The decontamination cost calculation model was therefore reconsidered. 99 parameters were selected to take into account all decontamination-related issues, and the decontamination cost calculation model was formed. The distributions of all parameters were determined. A sensitivity analysis using the Morris method was performed in order to identify important parameters that have large influence on the cost per severe accident and large extent of interactions with other parameters. We identified 25 important parameters, and fixed most negligible parameters to the median of their distributions to form a simplified decontamination cost calculation model. Calculations of cost per severe accident with the full model (all parameters distributed), and with the simplified model were performed and compared. The differences of the cost per severe accident and its components were not significant, which ensure the validity of the simplified model. The simplified model is used to perform a full scope calculation of the cost per severe accident and compared with the previous study. The decontamination cost increased its importance significantly. (author)

  18. 22 CFR 212.11 - Materials to be published.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Materials to be published. 212.11 Section 212... Federal Register § 212.11 Materials to be published. (a) USAID separately states and currently publishes... section. (b) USAID Public Notice No. 1 and the USAID Regulations published in chapter II of Title 22 and...

  19. Open Access Publishing in Particle Physics

    CERN Document Server

    2007-01-01

    Particle Physics, often referred to as High Energy Physics (HEP), spearheaded the Open Access dissemination of scientific results with the mass mailing of preprints in the pre-Web era and with the launch of the arXiv preprint system at the dawn of the '90s. The HEP community is now ready for a further push to Open Access while retaining all the advantages of the peerreview system and, at the same time, bring the spiralling cost of journal subscriptions under control. I will present a plan for the conversion to Open Access of HEP peer-reviewed journals, through a consortium of HEP funding agencies, laboratories and libraries: SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics). SCOAP3 will engage with scientific publishers towards building a sustainable model for Open Access publishing, which is as transparent as possible for HEP authors. The current system in which journals income comes from subscription fees is replaced with a scheme where SCOAP3 compensates publishers for the costs...

  20. Appropriateness of one-dimensional calculations for repository analysis

    International Nuclear Information System (INIS)

    Eaton, R.R.

    1994-01-01

    This paper brings into focus the results of numerous studies that have addressed issues associated with the validity of assumptions which are used to justify reducing the dimensionality of numerical calculations of water flow through Yucca Mountain, NV. It is shown that in many cases, one-dimensional modeling is more rigorous than previously assumed

  1. Standardized mortality in eating disorders--a quantitative summary of previously published and new evidence

    DEFF Research Database (Denmark)

    Nielsen, Søren; Møller-Madsen, S.; Isager, Torben

    2011-01-01

    strong evidence for an increase in SMR for anorexia nervosa (AN), whereas no firm conclusions could be drawn for bulimia nervosa (BN). Bias caused by loss to follow-up was quantified and found non-negligable in some samples (possible increase in SMR from 25% to 240%). We did not find a significant effect...

  2. Standardized mortality in eating disorders--a quantitative summary of previously published and new evidence

    DEFF Research Database (Denmark)

    Nielsen, Søren; Møller-Madsen, S.; Isager, Torben

    1998-01-01

    strong evidence for an increase in SMR for anorexia nervosa (AN), whereas no firm conclusions could be drawn for bulimia nervosa (BN). Bias caused by loss to follow-up was quantified and found non-negligable in some samples (possible increase in SMR from 25% to 240%). We did not find a significant effect...

  3. Behind the Spam: A "Spectral Analysis" of Predatory Publishers

    Science.gov (United States)

    Beall, Jeffrey

    2015-08-01

    Most researchers today are bombarded with spam email solicitations from questionable scholarly publishers. These emails solicit article manuscripts, editorial board service, and even ad hoc peer reviews. These "predatory" publishers exploit the scholarly publishing process, patterning themselves after legitimate scholarly publishers yet performing little or no peer review and quickly accepting submitted manuscripts and collecting fees from submitting authors. These counterfeit publishers and journals have published much junk science — especially in the field of cosmology — threatening the integrity of the academic record. This presentation examines the current state of predatory publishing and related scams such as fake impact factors and advises researchers how to navigate scholarly publishing to best avoid predatory publishers and other scholarly publishing-related perils.

  4. Equity for open-access journal publishing.

    Directory of Open Access Journals (Sweden)

    Stuart M Shieber

    2009-08-01

    Full Text Available Open-access journals, which provide access to their scholarly articles freely and without limitations, are at a systematic disadvantage relative to traditional closed-access journal publishing and its subscription-based business model. A simple, cost-effective remedy to this inequity could put open-access publishing on a path to become a sustainable, efficient system.

  5. Calculation of the viscosity of nuclear waste glass systems

    International Nuclear Information System (INIS)

    Shah, R.; Behrman, E.C.; Oksoy, D.

    1990-01-01

    Viscosity is one of the most important processing parameters and one of the most difficult to calculate theoretically, particularly for multicomponent systems like nuclear waste glasses. Here, the authors propose a semi-empirical approach based on the Fulcher equation, involving identification of key variables, for which coefficients are then determined by regression analysis. Results are presented for two glass systems, and compared to results of previous workers and to experiment. The authors also sketch a first-order statistical mechanical perturbation theory calculation for the effects on viscosity of a change in composition of the melt

  6. Calculation of total free energy yield as an alternative approach for predicting the importance of potential chemolithotrophic reactions in geothermal springs.

    Science.gov (United States)

    Dodsworth, Jeremy A; McDonald, Austin I; Hedlund, Brian P

    2012-08-01

    To inform hypotheses regarding the relative importance of chemolithotrophic metabolisms in geothermal environments, we calculated free energy yields of 26 chemical reactions potentially supporting chemolithotrophy in two US Great Basin hot springs, taking into account the effects of changing reactant and product activities on the Gibbs free energy as each reaction progressed. Results ranged from 1.2 × 10(-5) to 3.6 J kg(-1) spring water, or 3.7 × 10(-5) to 11.5 J s(-1) based on measured flow rates, with aerobic oxidation of CH(4) or NH4 + giving the highest average yields. Energy yields calculated without constraining pH were similar to those at constant pH except for reactions where H(+) was consumed, which often had significantly lower yields when pH was unconstrained. In contrast to the commonly used normalization of reaction chemical affinities per mole of electrons transferred, reaction energy yields for a given oxidant varied by several orders of magnitude and were more sensitive to differences in the activities of products and reactants. The high energy yield of aerobic ammonia oxidation is consistent with previous observations of significant ammonia oxidation rates and abundant ammonia-oxidizing archaea in sediments of these springs. This approach offers an additional lens through which to view the thermodynamic landscape of geothermal springs. © 2012 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

  7. Hybrid reduced order modeling for assembly calculations

    Energy Technology Data Exchange (ETDEWEB)

    Bang, Y.; Abdel-Khalik, H. S. [North Carolina State University, Raleigh, NC (United States); Jessee, M. A.; Mertyurek, U. [Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    2013-07-01

    While the accuracy of assembly calculations has considerably improved due to the increase in computer power enabling more refined description of the phase space and use of more sophisticated numerical algorithms, the computational cost continues to increase which limits the full utilization of their effectiveness for routine engineering analysis. Reduced order modeling is a mathematical vehicle that scales down the dimensionality of large-scale numerical problems to enable their repeated executions on small computing environment, often available to end users. This is done by capturing the most dominant underlying relationships between the model's inputs and outputs. Previous works demonstrated the use of the reduced order modeling for a single physics code, such as a radiation transport calculation. This manuscript extends those works to coupled code systems as currently employed in assembly calculations. Numerical tests are conducted using realistic SCALE assembly models with resonance self-shielding, neutron transport, and nuclides transmutation/depletion models representing the components of the coupled code system. (authors)

  8. Web publishing today and tomorrow

    CERN Document Server

    Lie, Hakon W

    1999-01-01

    The three lectures will give participants the grand tour of the Web as we know it today, as well as peeks into the past and the future. Many three-letter acronyms will be expanded, and an overview will be provided to see how the various specifications work together. Web publishing is the common theme throughout the lectures and in the second lecture, special emphasis will be given to data formats for publishing, including HTML, XML, MathML and SMIL. In the last lectures, automatic document manipulation and presentation will be discussed, including CSS, DOM and XTL.

  9. Usage of Geoprocessing Services in Precision Forestry for Wood Volume Calculation and Wind Risk Assessment

    Directory of Open Access Journals (Sweden)

    Tomáš Mikita

    2015-01-01

    Full Text Available This paper outlines the idea of a precision forestry tool for optimizing clearcut size and shape within the process of forest recovery and its publishing in the form of a web processing service for forest owners on the Internet. The designed tool titled COWRAS (Clearcut Optimization and Wind Risk Assessment is developed for optimization of clearcuts (their location, shape, size, and orientation with subsequent wind risk assessment. The tool primarily works with airborne LiDAR data previously processed to the form of a digital surface model (DSM and a digital elevation model (DEM. In the first step, the growing stock on the planned clearcut determined by its location and area in feature class is calculated (by the method of individual tree detection. Subsequently tree heights from canopy height model (CHM are extracted and then diameters at breast height (DBH and wood volume using the regressions are calculated. Information about wood volume of each tree in the clearcut is exported and summarized in a table. In the next step, all trees in the clearcut are removed and a new DSM without trees in the clearcut is generated. This canopy model subsequently serves as an input for evaluation of wind risk damage by the MAXTOPEX tool (Mikita et al., 2012. In the final raster, predisposition of uncovered forest stand edges (around the clearcut to wind risk is calculated based on this analysis. The entire tool works in the background of ArcGIS server as a spatial decision support system for foresters.

  10. Systematic review of the risk of uterine rupture with the use of amnioinfusion after previous cesarean delivery.

    Science.gov (United States)

    Hicks, Paul

    2005-04-01

    Amnioinfusion is commonly used for the intrapartum treatment of women with pregnancy complicated by thick meconium or oligohydramnios with deep variable fetal heart rate decelerations. Its benefit in women with previous cesarean deliveries is less known. Theoretically, rapid increases in intrauterine volume would lead to a higher risk of uterine rupture. Searches of the Cochrane Library from inception to the third quarter of 2001 and MEDLINE, 1966 to November 2001, were performed by using keywords "cesarean" and "amnioinfusion." Search terms were expanded to maximize results. All languages were included. Review articles, editorials, and data previously published in other sites were not analyzed. Four studies were retrieved having unduplicated data describing amnioinfusion in women who were attempting a trial of labor after previous cesarean section. As the studies were of disparate types, meta-analysis was not possible. The use of amnioinfusion in women with previous cesarean delivery who are undergoing a trial of labor may be a safe procedure, but confirmatory large, controlled prospective studies are needed before definitive recommendations can be made.

  11. Reclaiming Society Publishing

    Directory of Open Access Journals (Sweden)

    Philip E. Steinberg

    2015-07-01

    Full Text Available Learned societies have become aligned with commercial publishers, who have increasingly taken over the latter’s function as independent providers of scholarly information. Using the example of geographical societies, the advantages and disadvantages of this trend are examined. It is argued that in an era of digital publication, learned societies can offer leadership with a new model of open access that can guarantee high quality scholarly material whose publication costs are supported by society membership dues.

  12. Contribution to a neutronic calculation scheme for pressurized water reactors

    International Nuclear Information System (INIS)

    Martin Del Campo, C.

    1987-01-01

    This research thesis aims at developing and validating the set of data and codes which build up the neutron computation scheme of pressurized water reactors. More precisely, it focuses on the improvement of the precision of calculation of command clusters (absorbing components which can be inserted into the core to control the reactivity), and on the modelling of reflector representation (material placed around the core and reflecting back the escaping neutrons). For the first case, a precise calculation is performed, based on the transport theory. For the second case, diffusion constants obtained in the previous case and simplified equations are used to reduce the calculation cost

  13. Power calculator for instrumental variable analysis in pharmacoepidemiology.

    Science.gov (United States)

    Walker, Venexia M; Davies, Neil M; Windmeijer, Frank; Burgess, Stephen; Martin, Richard M

    2017-10-01

    Instrumental variable analysis, for example with physicians' prescribing preferences as an instrument for medications issued in primary care, is an increasingly popular method in the field of pharmacoepidemiology. Existing power calculators for studies using instrumental variable analysis, such as Mendelian randomization power calculators, do not allow for the structure of research questions in this field. This is because the analysis in pharmacoepidemiology will typically have stronger instruments and detect larger causal effects than in other fields. Consequently, there is a need for dedicated power calculators for pharmacoepidemiological research. The formula for calculating the power of a study using instrumental variable analysis in the context of pharmacoepidemiology is derived before being validated by a simulation study. The formula is applicable for studies using a single binary instrument to analyse the causal effect of a binary exposure on a continuous outcome. An online calculator, as well as packages in both R and Stata, are provided for the implementation of the formula by others. The statistical power of instrumental variable analysis in pharmacoepidemiological studies to detect a clinically meaningful treatment effect is an important consideration. Research questions in this field have distinct structures that must be accounted for when calculating power. The formula presented differs from existing instrumental variable power formulae due to its parametrization, which is designed specifically for ease of use by pharmacoepidemiologists. © The Author 2017. Published by Oxford University Press on behalf of the International Epidemiological Association

  14. Hprints - Licence to publish

    DEFF Research Database (Denmark)

    Rabow, Ingegerd; Sikström, Marjatta; Drachen, Thea Marie

    2010-01-01

    realised the potential advantages for them. The universities have a role here as well as the libraries that manage the archives and support scholars in various aspects of the publishing processes. Libraries are traditionally service providers with a mission to facilitate the knowledge production...

  15. Preoperative screening: value of previous tests.

    Science.gov (United States)

    Macpherson, D S; Snow, R; Lofgren, R P

    1990-12-15

    To determine the frequency of tests done in the year before elective surgery that might substitute for preoperative screening tests and to determine the frequency of test results that change from a normal value to a value likely to alter perioperative management. Retrospective cohort analysis of computerized laboratory data (complete blood count, sodium, potassium, and creatinine levels, prothrombin time, and partial thromboplastin time). Urban tertiary care Veterans Affairs Hospital. Consecutive sample of 1109 patients who had elective surgery in 1988. At admission, 7549 preoperative tests were done, 47% of which duplicated tests performed in the previous year. Of 3096 previous results that were normal as defined by hospital reference range and done closest to the time of but before admission (median interval, 2 months), 13 (0.4%; 95% CI, 0.2% to 0.7%), repeat values were outside a range considered acceptable for surgery. Most of the abnormalities were predictable from the patient's history, and most were not noted in the medical record. Of 461 previous tests that were abnormal, 78 (17%; CI, 13% to 20%) repeat values at admission were outside a range considered acceptable for surgery (P less than 0.001, frequency of clinically important abnormalities of patients with normal previous results with those with abnormal previous results). Physicians evaluating patients preoperatively could safely substitute the previous test results analyzed in this study for preoperative screening tests if the previous tests are normal and no obvious indication for retesting is present.

  16. Improved accuracy of intraocular lens power calculation with the Zeiss IOLMaster.

    Science.gov (United States)

    Olsen, Thomas

    2007-02-01

    This study aimed to demonstrate how the level of accuracy in intraocular lens (IOL) power calculation can be improved with optical biometry using partial optical coherence interferometry (PCI) (Zeiss IOLMaster) and current anterior chamber depth (ACD) prediction algorithms. Intraocular lens power in 461 consecutive cataract operations was calculated using both PCI and ultrasound and the accuracy of the results of each technique were compared. To illustrate the importance of ACD prediction per se, predictions were calculated using both a recently published 5-variable method and the Haigis 2-variable method and the results compared. All calculations were optimized in retrospect to account for systematic errors, including IOL constants and other off-set errors. The average absolute IOL prediction error (observed minus expected refraction) was 0.65 dioptres with ultrasound and 0.43 D with PCI using the 5-variable ACD prediction method (p ultrasound, respectively (p power calculation can be significantly improved using calibrated axial length readings obtained with PCI and modern IOL power calculation formulas incorporating the latest generation ACD prediction algorithms.

  17. Analysis and evaluation of critical experiments for validation of neutron transport calculations

    International Nuclear Information System (INIS)

    Bazzana, S.; Blaumann, H; Marquez Damian, J.I

    2009-01-01

    The calculation schemes, computational codes and nuclear data used in neutronic design require validation to obtain reliable results. In the nuclear criticality safety field this reliability also translates into a higher level of safety in procedures involving fissile material. The International Criticality Safety Benchmark Evaluation Project is an OECD/NEA activity led by the United States, in which participants from over 20 countries evaluate and publish criticality safety benchmarks. The product of this project is a set of benchmark experiment evaluations that are published annually in the International Handbook of Evaluated Criticality Safety Benchmark Experiments. With the recent participation of Argentina, this information is now available for use by the neutron calculation and criticality safety groups in Argentina. This work presents the methodology used for the evaluation of experimental data, some results obtained by the application of these methods, and some examples of the data available in the Handbook. [es

  18. Electronic Publishing or Electronic Information Handling?

    Science.gov (United States)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

  19. Calculations of recombination rates for cold 4He atoms from atom-dimer phase shifts and determination of universal scaling functions

    International Nuclear Information System (INIS)

    Shepard, J. R.

    2007-01-01

    Three-body recombination rates for cold 4 He are calculated with a method which exploits the simple relationship between the imaginary part of the atom-dimer elastic scattering phase shift and the S-matrix for recombination. The elastic phase shifts are computed above breakup threshold by solving a three-body Faddeev equation in momentum space with inputs based on a variety of modern atom-atom potentials. Recombination coefficients for the HFD-B3-FCII potential agree very well with the only previously published results. Since the elastic scattering and recombination processes for 4 He are governed by 'Efimov physics', they depend on universal functions of a scaling variable. The computed recombination coefficients for potentials other than HFD-B3-FCII make it possible to determine these universal functions

  20. Calculation of the net emission coefficient of an air thermal plasma at very high pressure

    International Nuclear Information System (INIS)

    Billoux, T; Cressault, Y; Teulet, Ph; Gleizes, A

    2012-01-01

    The aim of this paper is to present an accurate evaluation of the phenomena appearing for high pressure air plasmas supposed to be in local thermodynamic equilibrium (LTE). In the past, we already calculated the net emission coefficient for air mixtures at atmospheric pressure and for temperatures up to 30kK (molecular contribution being restricted to 10kK). Unfortunately, the existence of high pressures does not allow us to use this database due to the non-ideality of the plasma (Viriel and Debye corrections, energy cut-off ...), and due to the significant shifts of molecular reactions towards upper temperatures. Consequently, this paper proposes an improvement of our previous works with a consideration of high pressure corrections in the composition algorithm in order to take into account the pressure effects, and with a new calculation of all the contributions of the plasma radiation (atomic lines and continuum, molecular continuum, and molecular bands) using an updated database. A particular attention is paid to calculate the contribution of all the major molecular band systems to the radiation: O 2 (Schumann–Runge), N 2 (VUV, 1st and 2nd positive), NO (IR, β, γ, δ, element of ) and N 2 + (1st negative and Meinel). The discrete atomic lines and molecular bands radiation including the overlapping are calculated by a line-by-line method up to 30kK and 100 bar. This updated database is validated in the case of optically thin plasmas and pressure of 1bar by the comparison of our integrated emission strength with the published results. Finally, this work shows the necessity to extend the molecular radiation database up to 15kK at high pressure (bands and continuum) since their corresponding contributions could not be neglected at high temperature.

  1. High prevalence of genetic variants previously associated with Brugada syndrome in new exome data

    DEFF Research Database (Denmark)

    Risgaard, B; Jabbari, R; Refsgaard, L

    2013-01-01

    More than 300 variants in 12 genes have been associated with Brugada syndrome (BrS) which has a prevalence ranging between 1:2000 and 1:100,000. Until recently, there has been little knowledge regarding the distribution of genetic variations in the general population. This problem was partly solved......, when exome data from the NHLI GO Exome Sequencing Project (ESP) was published. In this study, we aimed to report the prevalence of previously BrS-associated variants in the ESP population. We performed a search in ESP for variants previously associated with BrS. In addition, four variants in ESP were...... to a surprisingly high genotype prevalence of 1:23 (274:6258). Genotyping the four common ESP-derived variants CACNA2D1 S709N, SCN5A F2004L, CACNB2 S143F, and CACNB2 T450I in the Danish controls, we found a genotype prevalence comparable with that found in ESP. We suggest that exome data are used in research...

  2. General Case in Determining Center-To-Center Spacing Between the Screw and the Roller in a Roller Drive, and Initial Contact Point of Their Mating Thread Turns. Development of Calculation Method and Software

    Directory of Open Access Journals (Sweden)

    D. S. Blinov

    2017-01-01

    Full Text Available One of the most important trends in development of machine engineering is to improve load capacity of mechanisms, assemblies and parts without increasing their overall dimensions and weight. This is also relevant to the most promising items so far, i.e. orbital roller drives (ORD, which are the rotational-to-progressive motion converters widely used in vehicles. The previously published article suggested increasing a load capacity (by about 15% through reducing a thread turn section angle of the threaded ORD components and change of the radius of roller thread turn section outline. Due to such ORD modification, a number of the most critical ORD parameters are to be changed thereby demanding further research. Further, the article published suggests a method considering the abovementioned changes to calculate the dimensions of ORD main components and their tolerance ranges.Though this method being not complete as the increment of ORD center-to-center spacing in relation to its rated value, required for assembly, is unknown; and to determine the ORD center-to-center spacing increment, outer diameters of the roller and screw threads are to be known. Hence, these two methods are interconnected.This article presents the numerical calculation method, mathematical support and method to determine the increment of ORD center-to-center spacing and initial contact point of the mating roller and screw thread turns. Due to considerable scope of calculations, the method was turned into the software.Similar calculation methods and techniques were developed to a particular case, where the thread turn section angle of the threaded components was of 90°, and the roller thread turn section outline was a circular arc centered to the roller axis. Hence the developed numerical calculation method, mathematical support and technique refer to the general case which is to determine the ORD center-to-center spacing increment and initial contact point of the mating roller

  3. The Academic Publishing Industry

    DEFF Research Database (Denmark)

    Nell, Phillip Christopher; Wenzel, Tim Ole; Schmidt, Florian

    2014-01-01

    . The case is intended to be used as a basis for class discussion rather than to illustrate effective handling of a managerial situation. It is based on published sources, interviews, and personal experience. The authors have disguised some names and other identifying information to protect confidentiality....

  4. Microscopic calculations of β-decay characteristics near the A = 130 r-process peak

    International Nuclear Information System (INIS)

    Borzov, I.N.; Goriely, S.; Pearson, J.M.

    1997-01-01

    The β-decay half-lives of r-process nuclides near Z=50, N=82 shell closures are calculated within the finite Fermi-system theory. To describe the ground state properties, the ETFSI approximation has been used. Comparison is made with exact self-consistent calculations, previous large-scale predictions and experimental data. (orig.)

  5. Sample Size Calculation: Inaccurate A Priori Assumptions for Nuisance Parameters Can Greatly Affect the Power of a Randomized Controlled Trial.

    Directory of Open Access Journals (Sweden)

    Elsa Tavernier

    Full Text Available We aimed to examine the extent to which inaccurate assumptions for nuisance parameters used to calculate sample size can affect the power of a randomized controlled trial (RCT. In a simulation study, we separately considered an RCT with continuous, dichotomous or time-to-event outcomes, with associated nuisance parameters of standard deviation, success rate in the control group and survival rate in the control group at some time point, respectively. For each type of outcome, we calculated a required sample size N for a hypothesized treatment effect, an assumed nuisance parameter and a nominal power of 80%. We then assumed a nuisance parameter associated with a relative error at the design stage. For each type of outcome, we randomly drew 10,000 relative errors of the associated nuisance parameter (from empirical distributions derived from a previously published review. Then, retro-fitting the sample size formula, we derived, for the pre-calculated sample size N, the real power of the RCT, taking into account the relative error for the nuisance parameter. In total, 23%, 0% and 18% of RCTs with continuous, binary and time-to-event outcomes, respectively, were underpowered (i.e., the real power was 90%. Even with proper calculation of sample size, a substantial number of trials are underpowered or overpowered because of imprecise knowledge of nuisance parameters. Such findings raise questions about how sample size for RCTs should be determined.

  6. Towards mainstreaming of biodiversity data publishing: recommendations of the GBIF Data Publishing Framework Task Group.

    Science.gov (United States)

    Moritz, Tom; Krishnan, S; Roberts, Dave; Ingwersen, Peter; Agosti, Donat; Penev, Lyubomir; Cockerill, Matthew; Chavan, Vishwas

    2011-01-01

    Data are the evidentiary basis for scientific hypotheses, analyses and publication, for policy formation and for decision-making. They are essential to the evaluation and testing of results by peer scientists both present and future. There is broad consensus in the scientific and conservation communities that data should be freely, openly available in a sustained, persistent and secure way, and thus standards for 'free' and 'open' access to data have become well developed in recent years. The question of effective access to data remains highly problematic. Specifically with respect to scientific publishing, the ability to critically evaluate a published scientific hypothesis or scientific report is contingent on the examination, analysis, evaluation - and if feasible - on the re-generation of data on which conclusions are based. It is not coincidental that in the recent 'climategate' controversies, the quality and integrity of data and their analytical treatment were central to the debate. There is recent evidence that even when scientific data are requested for evaluation they may not be available. The history of dissemination of scientific results has been marked by paradigm shifts driven by the emergence of new technologies. In recent decades, the advance of computer-based technology linked to global communications networks has created the potential for broader and more consistent dissemination of scientific information and data. Yet, in this digital era, scientists and conservationists, organizations and institutions have often been slow to make data available. Community studies suggest that the withholding of data can be attributed to a lack of awareness, to a lack of technical capacity, to concerns that data should be withheld for reasons of perceived personal or organizational self interest, or to lack of adequate mechanisms for attribution. There is a clear need for institutionalization of a 'data publishing framework' that can address sociocultural

  7. Towards mainstreaming of biodiversity data publishing: recommendations of the GBIF Data Publishing Framework Task Group

    Directory of Open Access Journals (Sweden)

    Moritz Tom

    2011-12-01

    Full Text Available Abstract Background Data are the evidentiary basis for scientific hypotheses, analyses and publication, for policy formation and for decision-making. They are essential to the evaluation and testing of results by peer scientists both present and future. There is broad consensus in the scientific and conservation communities that data should be freely, openly available in a sustained, persistent and secure way, and thus standards for 'free' and 'open' access to data have become well developed in recent years. The question of effective access to data remains highly problematic. Discussion Specifically with respect to scientific publishing, the ability to critically evaluate a published scientific hypothesis or scientific report is contingent on the examination, analysis, evaluation - and if feasible - on the re-generation of data on which conclusions are based. It is not coincidental that in the recent 'climategate' controversies, the quality and integrity of data and their analytical treatment were central to the debate. There is recent evidence that even when scientific data are requested for evaluation they may not be available. The history of dissemination of scientific results has been marked by paradigm shifts driven by the emergence of new technologies. In recent decades, the advance of computer-based technology linked to global communications networks has created the potential for broader and more consistent dissemination of scientific information and data. Yet, in this digital era, scientists and conservationists, organizations and institutions have often been slow to make data available. Community studies suggest that the withholding of data can be attributed to a lack of awareness, to a lack of technical capacity, to concerns that data should be withheld for reasons of perceived personal or organizational self interest, or to lack of adequate mechanisms for attribution. Conclusions There is a clear need for institutionalization of a

  8. Relativistic QRPA calculation of β-decay rates of r-process nuclei

    International Nuclear Information System (INIS)

    Marketin, T.; Paar, N.; Niksic, T.

    2009-01-01

    The rapid neutron-capture process (r-process) is responsible for the creation of many nuclei heavier than iron. To describe the r-process, precise data is needed on a large number of neutron-rich nuclei, most of which are not experimentally reachable. One crucial parameter in modeling the nucleosynthesis are the half-lives of the nuclei through which the r-process runs. Therefore, it is of great importance to develop a reliable predictive model which can be applied to the decay of exotic nuclei. A fully self-consistent calculation of β-decay rates is presented, based on a microscopic theoretical framework. Nuclear ground state is determined using the Relativistic Hartree-Bogoliubov (RHB) model with density-dependent meson-nucleon coupling constants. Momentum dependent terms are also included to improve the density of single-particle states around the Fermi level via an increase of the effective nucleon mass [1]. Transition rates are calculated within the proton-neutron relativistic quasiparticle RPA using the same interaction that was used in the RHB equations. In this way no additional parameters are introduced in the RPA calculation. Weak interaction rates are calculated using the current-current formalism previously employed in the study of other astrophysically significant weak processes [2,3], which systematically includes the contributions of forbidden transitions. This theoretical framework will be utilized to study the contributions of forbidden transitions to the total decay rate in several mass regions. We will compare the calculated half-lives for several isotopic chains with previous calculations and experimental data and discuss possible improvements to the model.(author)

  9. Zn-VI quasiparticle gaps and optical spectra from many-body calculations.

    Science.gov (United States)

    Riefer, A; Weber, N; Mund, J; Yakovlev, D R; Bayer, M; Schindlmayr, Arno; Meier, C; Schmidt, W G

    2017-06-01

    The electronic band structures of hexagonal ZnO and cubic ZnS, ZnSe, and ZnTe compounds are determined within hybrid-density-functional theory and quasiparticle calculations. It is found that the band-edge energies calculated on the [Formula: see text] (Zn chalcogenides) or GW (ZnO) level of theory agree well with experiment, while fully self-consistent QSGW calculations are required for the correct description of the Zn 3d bands. The quasiparticle band structures are used to calculate the linear response and second-harmonic-generation (SHG) spectra of the Zn-VI compounds. Excitonic effects in the optical absorption are accounted for within the Bethe-Salpeter approach. The calculated spectra are discussed in the context of previous experimental data and present SHG measurements for ZnO.

  10. Microdosimetry calculations for monoenergetic electrons using Geant4-DNA combined with a weighted track sampling algorithm.

    Science.gov (United States)

    Famulari, Gabriel; Pater, Piotr; Enger, Shirin A

    2017-07-07

    The aim of this study was to calculate microdosimetric distributions for low energy electrons simulated using the Monte Carlo track structure code Geant4-DNA. Tracks for monoenergetic electrons with kinetic energies ranging from 100 eV to 1 MeV were simulated in an infinite spherical water phantom using the Geant4-DNA extension included in Geant4 toolkit version 10.2 (patch 02). The microdosimetric distributions were obtained through random sampling of transfer points and overlaying scoring volumes within the associated volume of the tracks. Relative frequency distributions of energy deposition f(>E)/f(>0) and dose mean lineal energy ([Formula: see text]) values were calculated in nanometer-sized spherical and cylindrical targets. The effects of scoring volume and scoring techniques were examined. The results were compared with published data generated using MOCA8B and KURBUC. Geant4-DNA produces a lower frequency of higher energy deposits than MOCA8B. The [Formula: see text] values calculated with Geant4-DNA are smaller than those calculated using MOCA8B and KURBUC. The differences are mainly due to the lower ionization and excitation cross sections of Geant4-DNA for low energy electrons. To a lesser extent, discrepancies can also be attributed to the implementation in this study of a new and fast scoring technique that differs from that used in previous studies. For the same mean chord length ([Formula: see text]), the [Formula: see text] calculated in cylindrical volumes are larger than those calculated in spherical volumes. The discrepancies due to cross sections and scoring geometries increase with decreasing scoring site dimensions. A new set of [Formula: see text] values has been presented for monoenergetic electrons using a fast track sampling algorithm and the most recent physics models implemented in Geant4-DNA. This dataset can be combined with primary electron spectra to predict the radiation quality of photon and electron beams.

  11. Electron/Photon Verification Calculations Using MCNP4B

    Energy Technology Data Exchange (ETDEWEB)

    D. P. Gierga; K. J. Adams

    1999-04-01

    MCNP4BW was released in February 1997 with significant enhancements to electron/photon transport methods. These enhancements have been verified against a wide range of published electron/photon experiments, spanning high energy bremsstrahlung production to electron transmission and reflection. The impact of several MCNP tally options and physics parameters was explored in detail. The agreement between experiment and simulation was usually within two standard deviations of the experimental and calculational errors. Furthermore, sub-step artifacts for bremsstrahlung production were shown to be mitigated. A detailed suite of electron depth dose calculations in water is also presented. Areas for future code development have also been explored and include the dependence of cell and detector tallies on different bremsstrahlung angular models and alternative variance reduction splitting schemes for bremsstrahlung production.

  12. Establishing a publishing outfit in Nigeria | Emenyonu | International ...

    African Journals Online (AJOL)

    Journal Home > Vol 12, No 1 (2017) > ... The paper examines the steps in establishing a publishing firm in the Nigerian environment. ... to follow in establishing a publishing company, networking with stakeholders in the publishing industry,the ...

  13. Desktop Publishing in Education.

    Science.gov (United States)

    Hall, Wendy; Layman, J.

    1989-01-01

    Discusses the state of desktop publishing (DTP) in education today and describes the weaknesses of the systems available for use in the classroom. Highlights include document design and layout; text composition; graphics; word processing capabilities; a comparison of commercial and educational DTP packages; and skills required for DTP. (four…

  14. FTP: Full-Text Publishing?

    Science.gov (United States)

    Jul, Erik

    1992-01-01

    Describes the use of file transfer protocol (FTP) on the INTERNET computer network and considers its use as an electronic publishing system. The differing electronic formats of text files are discussed; the preparation and access of documents are described; and problems are addressed, including a lack of consistency. (LRW)

  15. Spatial modelling of marine organisms in Forsmark and Oskarshamn. Including calculation of physical predictor variables

    Energy Technology Data Exchange (ETDEWEB)

    Carlen, Ida; Nikolopoulos, Anna; Isaeus, Martin (AquaBiota Water Research, Stockholm (SE))

    2007-06-15

    GIS grids (maps) of marine parameters were created using point data from previous site investigations in the Forsmark and Oskarshamn areas. The proportion of global radiation reaching the sea bottom in Forsmark and Oskarshamn was calculated in ArcView, using Secchi depth measurements and the digital elevation models for the respective area. The number of days per year when the incoming light exceeds 5 MJ/m2 at the bottom was then calculated using the result of the previous calculations together with measured global radiation. Existing modelled grid-point data on bottom and pelagic temperature for Forsmark were interpolated to create surface covering grids. Bottom and pelagic temperature grids for Oskarshamn were calculated using point measurements to achieve yearly averages for a few points and then using regressions with existing grids to create new maps. Phytoplankton primary production in Forsmark was calculated using point measurements of chlorophyll and irradiance, and a regression with a modelled grid of Secchi depth. Distribution of biomass of macrophyte communities in Forsmark and Oskarshamn was calculated using spatial modelling in GRASP, based on field data from previous surveys. Physical parameters such as those described above were used as predictor variables. Distribution of biomass of different functional groups of fish in Forsmark was calculated using spatial modelling based on previous surveys and with predictor variables such as physical parameters and results from macrophyte modelling. All results are presented as maps in the report. The quality of the modelled predictions varies as a consequence of the quality and amount of the input data, the ecology and knowledge of the predicted phenomena, and by the modelling technique used. A substantial part of the variation is not described by the models, which should be expected for biological modelling. Therefore, the resulting grids should be used with caution and with this uncertainty kept in mind. All

  16. Spatial modelling of marine organisms in Forsmark and Oskarshamn. Including calculation of physical predictor variables

    International Nuclear Information System (INIS)

    Carlen, Ida; Nikolopoulos, Anna; Isaeus, Martin

    2007-06-01

    GIS grids (maps) of marine parameters were created using point data from previous site investigations in the Forsmark and Oskarshamn areas. The proportion of global radiation reaching the sea bottom in Forsmark and Oskarshamn was calculated in ArcView, using Secchi depth measurements and the digital elevation models for the respective area. The number of days per year when the incoming light exceeds 5 MJ/m2 at the bottom was then calculated using the result of the previous calculations together with measured global radiation. Existing modelled grid-point data on bottom and pelagic temperature for Forsmark were interpolated to create surface covering grids. Bottom and pelagic temperature grids for Oskarshamn were calculated using point measurements to achieve yearly averages for a few points and then using regressions with existing grids to create new maps. Phytoplankton primary production in Forsmark was calculated using point measurements of chlorophyll and irradiance, and a regression with a modelled grid of Secchi depth. Distribution of biomass of macrophyte communities in Forsmark and Oskarshamn was calculated using spatial modelling in GRASP, based on field data from previous surveys. Physical parameters such as those described above were used as predictor variables. Distribution of biomass of different functional groups of fish in Forsmark was calculated using spatial modelling based on previous surveys and with predictor variables such as physical parameters and results from macrophyte modelling. All results are presented as maps in the report. The quality of the modelled predictions varies as a consequence of the quality and amount of the input data, the ecology and knowledge of the predicted phenomena, and by the modelling technique used. A substantial part of the variation is not described by the models, which should be expected for biological modelling. Therefore, the resulting grids should be used with caution and with this uncertainty kept in mind. All

  17. Trends in scientific publishing: Dark clouds loom large.

    Science.gov (United States)

    Vinny, Pulikottil Wilson; Vishnu, Venugopalan Y; Lal, Vivek

    2016-04-15

    The world wide web has brought about a paradigm shift in the way medical research is published and accessed. The ease with which a new journal can be started/hosted by publishing start-ups is unprecedented. The tremendous capabilities of the world wide web and the open access revolution when combined with a highly profitable business have attracted unscrupulous fraudulent operators to the publishing industry. The intent of these fraudulent publishers is solely driven by profit with utter disregard to scientific content, peer reviews and ethics. This phenomenon has been referred to as "predatory publishing". The "international" tag of such journals often betrays their true origins. The gold open access model of publishing, where the author pays the publisher, when coupled with a non-existent peer review threatens to blur the distinction between science and pseudoscience. The average researcher needs to be made more aware of this clear and present danger to the scientific community. Prevention is better than cure. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Citations of plenary-session articles published in the Proceedings of the International Symposium on Veterinary Epidemiology and Economics.

    Science.gov (United States)

    Salman, M D; Dewell, Reneé; Willeberg, Preben; GrandMaison, Nadine; Schoenbaum, Melissa; Moothart, Tom

    2007-06-15

    We measured the potential impact of articles representing the International Symposium on Veterinary Epidemiology and Economics (ISVEE) plenary-session presentations in subsequent published literature. Between July 1, 2004 and November 9, 2004, we searched the Web of Science for citations in the scientific literature to all 99 plenary-session articles published in the proceedings of the previous nine ISVEEs (or in journal special issues dedicated to the ISVEE plenary articles). We used a 4-year window around the publication of each of the ISVEE proceedings. We located 187 citations for 37 (of the 99) articles. We infer that the ISVEE proceedings represent an important resource for veterinary epidemiology.

  19. EuroFIR Guideline on calculation of nutrient content of foods for food business operators.

    Science.gov (United States)

    Machackova, Marie; Giertlova, Anna; Porubska, Janka; Roe, Mark; Ramos, Carlos; Finglas, Paul

    2018-01-01

    This paper presents a Guideline for calculating nutrient content of foods by calculation methods for food business operators and presents data on compliance between calculated values and analytically determined values. In the EU, calculation methods are legally valid to determine the nutrient values of foods for nutrition labelling (Regulation (EU) No 1169/2011). However, neither a specific calculation method nor rules for use of retention factors are defined. EuroFIR AISBL (European Food Information Resource) has introduced a Recipe Calculation Guideline based on the EuroFIR harmonized procedure for recipe calculation. The aim is to provide food businesses with a step-by-step tool for calculating nutrient content of foods for the purpose of nutrition declaration. The development of this Guideline and use in the Czech Republic is described and future application to other Member States is discussed. Limitations of calculation methods and the importance of high quality food composition data are discussed. Copyright © 2017. Published by Elsevier Ltd.

  20. Speed dependence of CH335Cl–O2 line-broadening parameters probed on rotational transitions: Measurements and semi-classical calculations

    International Nuclear Information System (INIS)

    Buldyreva, J.; Margulès, L.; Motiyenko, R.A.; Rohart, F.

    2013-01-01

    Relaxation parameters for K-components (K≤6) of six J→J+1 rotational transitions (J=6, 10, 17, 22, 31 and 33) of CH 3 35 Cl perturbed by O 2 are measured at room temperature with Voigt, speed-dependent Voigt and Galatry profiles in order to probe the speed-dependence effects. With respect to the previous study of CH 3 35 Cl–N 2 system [Guinet et al., J Quant Spectrosc Radiat Transfer 2012;113:1113], higher active-gas pressures are reached, providing better signal-to-noise ratios, and the exact expression of the Beer–Lambert law is introduced in the fitting procedure, leading, among other advantages, to much more realistic low-pressure results. The broadening parameters of the considered lines are also computed by a semi-classical method for various relative velocities of colliders and the powers characterizing the dependence of the collisional cross-sections on relative speeds are deduced as functions of the rotational numbers J and K. Additional calculations performed with the Maxwell–Boltzmann distribution of velocities show no significant difference with the earlier results [Buldyreva et al., Phys Chem Chem Phys 2011;13:20326] obtained within the mean thermal velocity approximation. Weighted sums of the presently measured Voigt-profile O 2 -broadening parameters and of the previously published N 2 -broadening ones are calculated to yield experimental air-broadening coefficients for spectroscopic databases. -- Highlights: • Analysis of the speed dependence of relaxation rates of CH 3 Cl lines. • Introduction of the Beer–Lambert law in analysis of line-shapes recorded by FM technique. • Comparison of Maxwell–Boltzmann averaging and mean thermal velocity calculations. • Estimation of air-induced broadening for CH 3 Cl rotational lines

  1. Fungal Keratitis Due to Beauveria bassiana in a Contact Lenses Wearer and Review of Published Reports.

    Science.gov (United States)

    Lara Oya, Ana; Medialdea Hurtado, María Eloisa; Rojo Martín, María Dolores; Aguilera Pérez, Antonia; Alastruey-Izquierdo, Ana; Miranda Casas, Consuelo; Rubio Prats, Marina; Medialdea Marcos, Santiago; Navarro Marí, José María

    2016-10-01

    Fungal keratitis is a severe ocular infection that primarily affects subjects engaged in outdoor activities. Risk factors include allergic conjunctivitis, previous eye surgery, previous treatment with wide-spectrum antimicrobial agents and corticosteroids and using contact lenses. Corneal infection is usually secondary to trauma involving organic material, which is often the only predisposing factor. Early diagnosis based on clinical examination and microbiological investigation (microscopy, cultures and molecular techniques) is crucial to selecting the appropriate antifungal therapy and prevent progression. We report the case of a patient with keratitis due to Beauveria bassiana, an opportunistic and entomopathogenic filamentous fungus that is used as a biological insecticide and which is a rare cause of corneal infection. We review previous cases reports of B. bassiana keratitis published and its main features to compare with our case, a female occasional agriculture worker who had not suffered any trauma involving organic material. The patient received topical and oral antifungal therapy and debridement surgery, with a satisfactory outcome.

  2. Measurement errors in polymerase chain reaction are a confounding factor for a correct interpretation of 5-HTTLPR polymorphism effects on lifelong premature ejaculation: a critical analysis of a previously published meta-analysis of six studies.

    Directory of Open Access Journals (Sweden)

    Paddy K C Janssen

    Full Text Available OBJECTIVE: To analyze a recently published meta-analysis of six studies on 5-HTTLPR polymorphism and lifelong premature ejaculation (PE. METHODS: Calculation of fraction observed and expected genotype frequencies and Hardy Weinberg equilibrium (HWE of cases and controls. LL,SL and SS genotype frequencies of patients were subtracted from genotype frequencies of an ideal population (LL25%, SL50%, SS25%, p = 1 for HWE. Analysis of PCRs of six studies and re-analysis of the analysis and Odds ratios (ORs reported in the recently published meta-analysis. RESULTS: Three studies deviated from HWE in patients and one study deviated from HWE in controls. In three studies in-HWE the mean deviation of genotype frequencies from a theoretical population not-deviating from HWE was small: LL(1.7%, SL(-2.3%, SS(0.6%. In three studies not-in-HWE the mean deviation of genotype frequencies was high: LL(-3.3%, SL(-18.5% and SS(21.8% with very low percentage SL genotype concurrent with very high percentage SS genotype. The most serious PCR deviations were reported in the three not-in-HWE studies. The three in-HWE studies had normal OR. In contrast, the three not-in-HWE studies had a low OR. CONCLUSIONS: In three studies not-in-HWE and with very low OR, inadequate PCR analysis and/or inadequate interpretation of its gel electrophoresis resulted in very low SL and a resulting shift to very high SS genotype frequency outcome. Consequently, PCRs of these three studies are not reliable. Failure to note the inadequacy of PCR tests makes such PCRs a confounding factor in clinical interpretation of genetic studies. Currently, a meta-analysis can only be performed on three studies-in-HWE. However, based on the three studies-in-HWE with OR of about 1 there is not any indication that in men with lifelong PE the frequency of LL,SL and SS genotype deviates from the general male population and/or that the SL or SS genotype is in any way associated with lifelong PE.

  3. The biomechanics of running in athletes with previous hamstring injury: A case-control study.

    Science.gov (United States)

    Daly, C; Persson, U McCarthy; Twycross-Lewis, R; Woledge, R C; Morrissey, D

    2016-04-01

    Hamstring injury is prevalent with persistently high reinjury rates. We aim to inform hamstring rehabilitation by exploring the electromyographic and kinematic characteristics of running in athletes with previous hamstring injury. Nine elite male Gaelic games athletes who had returned to sport after hamstring injury and eight closely matched controls sprinted while lower limb kinematics and muscle activity of the previously injured biceps femoris, bilateral gluteus maximus, lumbar erector spinae, rectus femoris, and external oblique were recorded. Intergroup comparisons of muscle activation ratios and kinematics were performed. Previously injured athletes demonstrated significantly reduced biceps femoris muscle activation ratios with respect to ipsilateral gluteus maximus (maximum difference -12.5%, P = 0.03), ipsilateral erector spinae (maximum difference -12.5%, P = 0.01), ipsilateral external oblique (maximum difference -23%, P = 0.01), and contralateral rectus femoris (maximum difference -22%, P = 0.02) in the late swing phase. We also detected sagittal asymmetry in hip flexion (maximum 8°, P = 0.01), pelvic tilt (maximum 4°, P = 0.02), and medial rotation of the knee (maximum 6°, P = 0.03) effectively putting the hamstrings in a lengthened position just before heel strike. Previous hamstring injury is associated with altered biceps femoris associated muscle activity and potentially injurious kinematics. These deficits should be considered and addressed during rehabilitation. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Measurement, calculation and evaluation of photon production cross-sections

    International Nuclear Information System (INIS)

    Kocherov, N.P.

    1990-03-01

    The IAEA Specialists' Meeting on Measurement, Calculation and Evaluation of Photon Production Cross-Sections was held in Smolenice, Czechoslovakia, 5-7 February 1990. The meeting was hosted by the Institute of Physics of the Electro-Physical Research Centre, Slovak Academy of Sciences, Bratislava. This report contains the conclusions and recommendations of this meeting. The papers which the participants have presented at the meeting will be published as an INDC Report. (author)

  5. Experimental verification of internal dosimetry calculations. Annual progress report

    International Nuclear Information System (INIS)

    1980-05-01

    During the past year a dosimetry research program has been established in the School of Nuclear Engineering at the Georgia Institute of Technology. The major objective of this program has been to provide research results upon which a useful internal dosimetry system could be based. The important application of this dosimetry system will be the experimental verification of internal dosimetry calculations such as those published by the MIRD Committee

  6. Comparison of image features calculated in different dimensions for computer-aided diagnosis of lung nodules

    Science.gov (United States)

    Xu, Ye; Lee, Michael C.; Boroczky, Lilla; Cann, Aaron D.; Borczuk, Alain C.; Kawut, Steven M.; Powell, Charles A.

    2009-02-01

    Features calculated from different dimensions of images capture quantitative information of the lung nodules through one or multiple image slices. Previously published computer-aided diagnosis (CADx) systems have used either twodimensional (2D) or three-dimensional (3D) features, though there has been little systematic analysis of the relevance of the different dimensions and of the impact of combining different dimensions. The aim of this study is to determine the importance of combining features calculated in different dimensions. We have performed CADx experiments on 125 pulmonary nodules imaged using multi-detector row CT (MDCT). The CADx system computed 192 2D, 2.5D, and 3D image features of the lesions. Leave-one-out experiments were performed using five different combinations of features from different dimensions: 2D, 3D, 2.5D, 2D+3D, and 2D+3D+2.5D. The experiments were performed ten times for each group. Accuracy, sensitivity and specificity were used to evaluate the performance. Wilcoxon signed-rank tests were applied to compare the classification results from these five different combinations of features. Our results showed that 3D image features generate the best result compared with other combinations of features. This suggests one approach to potentially reducing the dimensionality of the CADx data space and the computational complexity of the system while maintaining diagnostic accuracy.

  7. Calculation of nonzero-temperature Casimir forces in the time domain

    International Nuclear Information System (INIS)

    Pan, Kai; Reid, M. T. Homer; McCauley, Alexander P.; Rodriguez, Alejandro W.; White, Jacob K.; Johnson, Steven G.

    2011-01-01

    We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example, using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against analytical and numerical frequency-domain calculations, and show a surprising high-temperature disappearance of a nonmonotonic behavior previously demonstrated in a pistonlike geometry.

  8. Efficient implementation of core-excitation Bethe-Salpeter equation calculations

    Science.gov (United States)

    Gilmore, K.; Vinson, John; Shirley, E. L.; Prendergast, D.; Pemmaraju, C. D.; Kas, J. J.; Vila, F. D.; Rehr, J. J.

    2015-12-01

    We present an efficient implementation of the Bethe-Salpeter equation (BSE) method for obtaining core-level spectra including X-ray absorption (XAS), X-ray emission (XES), and both resonant and non-resonant inelastic X-ray scattering spectra (N/RIXS). Calculations are based on density functional theory (DFT) electronic structures generated either by ABINIT or QuantumESPRESSO, both plane-wave basis, pseudopotential codes. This electronic structure is improved through the inclusion of a GW self energy. The projector augmented wave technique is used to evaluate transition matrix elements between core-level and band states. Final two-particle scattering states are obtained with the NIST core-level BSE solver (NBSE). We have previously reported this implementation, which we refer to as OCEAN (Obtaining Core Excitations from Ab initio electronic structure and NBSE) (Vinson et al., 2011). Here, we present additional efficiencies that enable us to evaluate spectra for systems ten times larger than previously possible; containing up to a few thousand electrons. These improvements include the implementation of optimal basis functions that reduce the cost of the initial DFT calculations, more complete parallelization of the screening calculation and of the action of the BSE Hamiltonian, and various memory reductions. Scaling is demonstrated on supercells of SrTiO3 and example spectra for the organic light emitting molecule Tris-(8-hydroxyquinoline)aluminum (Alq3) are presented. The ability to perform large-scale spectral calculations is particularly advantageous for investigating dilute or non-periodic systems such as doped materials, amorphous systems, or complex nano-structures.

  9. The author training manual develop marketable ideas, craft books that sell, become the author publishers want, and self-publish effectively

    CERN Document Server

    Amir, Nina

    2014-01-01

    Anyone can publish a book and become an ""author,"" but if you want to become a successful author with a profitable publishing career, you need a clear, step-by-step guide to help you develop book ideas that sell. In The Author Training Manual, expert editor and book coach Nina Amir reveals the exact process successful authors have used to create business plans and proposals for their books and teaches you how to view your ideas through the eyes of acquisitions editors and literary agents. Whether you write fiction or nonfiction, plan to traditionally publish or self-publish, The Author Tra

  10. E-publishing and multimodalities

    Directory of Open Access Journals (Sweden)

    Yngve Nordkvelle

    2008-12-01

    Full Text Available In the literature of e-publishing there has been a consistent call from the advent of e-publishing on, until now, to explore new ways of expressing ideas through the new media. It has been claimed that the Internet opens an alley of possibilities and opportunites for publishing that will change the ways of publishing once and for all. In the area of publication of e-journals, however, the call for changes has received very modest responds.The thing is, it appears, that the conventional paper journal has a solid grip on the accepted formats of publishing. In a published research paper Mayernik (2007 explaines some of the reasons for that. Although pioneers of e-publishing suggested various areas where academic publishing could be expanded on, the opportunities given are scarsely used. Mayernik outlines "Non-linearity", "Multimedia", "Multiple use", "Interactivity" and "Rapid Publication" as areas of expansion for the academic e-journal. (2007. The paper deserves a thorough reading in itself, and I will briefly quote from his conclusion: "It is likely that the traditional linear article will continue to be the prevalent format for scholarly journals, both print and electronic, for the foreseeable future, and while electronic features will garner more and more use as technology improves, they will continue to be used to supplement, and not supplant, the traditional article."This is a challenging situation. If we accept the present dominant style of presenting scientific literature, we would use our energy best in seeking a way of improving the efficiency of that communication style. The use of multimedia, non-linearity etc. would perfect the present state, but still keep the scientific article as the main template. It is very unlikely that scientific publication will substitute the scholarly article with unproven alternatives. What we face is a rather conservative style of remediation that blurs the impact of the new media, - or "transparency" if

  11. Opacity calculations for laser plasma applications

    International Nuclear Information System (INIS)

    Magee, N.H. Jr.

    1986-01-01

    The Los Alamos LTE light element detailed configuration opacity code (LEDCOP) has been revised to provide more accurate absorption coefficients and group means for modern radiation-hydrodynamic codes. The new group means will be especially useful for computing the transport of thermal radiation from laser deposition. The principal improvement is the inclusion of a complete set of accurate and internally consistent LS term energies and oscillator strengths in both the EOS and absorption coefficients. Selected energies and oscillator strengths were calculated from a Hartree-Fock code, then fitted by a quantum defect method. This allowed transitions at all wavelengths to be treated consistently and accurately instead of being limited to wavelength regions covered by experimental observations or isolated theoretical calculations. A second improvement is the use of more accurate photoionization cross sections for excited as well as ground state configurations. These cross sections are now more consistent with the bound-bound oscillator strengths, leading to a smooth transition across the continuum limit. Results will be presented showing the agreement of the LS term energies and oscillator strengths with observed values. The new absorption coefficients will be compared with previous calculations. 5 refs., 9 figs., 1 tab

  12. Publisher Correction: Predicting unpredictability

    Science.gov (United States)

    Davis, Steven J.

    2018-06-01

    In this News & Views article originally published, the wrong graph was used for panel b of Fig. 1, and the numbers on the y axes of panels a and c were incorrect; the original and corrected Fig. 1 is shown below. This has now been corrected in all versions of the News & Views.

  13. An alternative approach to calculating Area-Under-the-Curve (AUC) in delay discounting research.

    Science.gov (United States)

    Borges, Allison M; Kuang, Jinyi; Milhorn, Hannah; Yi, Richard

    2016-09-01

    Applied to delay discounting data, Area-Under-the-Curve (AUC) provides an atheoretical index of the rate of delay discounting. The conventional method of calculating AUC, by summing the areas of the trapezoids formed by successive delay-indifference point pairings, does not account for the fact that most delay discounting tasks scale delay pseudoexponentially, that is, time intervals between delays typically get larger as delays get longer. This results in a disproportionate contribution of indifference points at long delays to the total AUC, with minimal contribution from indifference points at short delays. We propose two modifications that correct for this imbalance via a base-10 logarithmic transformation and an ordinal scaling transformation of delays. These newly proposed indices of discounting, AUClog d and AUCor d, address the limitation of AUC while preserving a primary strength (remaining atheoretical). Re-examination of previously published data provides empirical support for both AUClog d and AUCor d . Thus, we believe theoretical and empirical arguments favor these methods as the preferred atheoretical indices of delay discounting. © 2016 Society for the Experimental Analysis of Behavior.

  14. Pressure algorithm for elliptic flow calculations with the PDF method

    Science.gov (United States)

    Anand, M. S.; Pope, S. B.; Mongia, H. C.

    1991-01-01

    An algorithm to determine the mean pressure field for elliptic flow calculations with the probability density function (PDF) method is developed and applied. The PDF method is a most promising approach for the computation of turbulent reacting flows. Previous computations of elliptic flows with the method were in conjunction with conventional finite volume based calculations that provided the mean pressure field. The algorithm developed and described here permits the mean pressure field to be determined within the PDF calculations. The PDF method incorporating the pressure algorithm is applied to the flow past a backward-facing step. The results are in good agreement with data for the reattachment length, mean velocities, and turbulence quantities including triple correlations.

  15. [A brief history of resuscitation - the influence of previous experience on modern techniques and methods].

    Science.gov (United States)

    Kucmin, Tomasz; Płowaś-Goral, Małgorzata; Nogalski, Adam

    2015-02-01

    Cardiopulmonary resuscitation (CPR) is relatively novel branch of medical science, however first descriptions of mouth-to-mouth ventilation are to be found in the Bible and literature is full of descriptions of different resuscitation methods - from flagellation and ventilation with bellows through hanging the victims upside down and compressing the chest in order to stimulate ventilation to rectal fumigation with tobacco smoke. The modern history of CPR starts with Kouwenhoven et al. who in 1960 published a paper regarding heart massage through chest compressions. Shortly after that in 1961Peter Safar presented a paradigm promoting opening the airway, performing rescue breaths and chest compressions. First CPR guidelines were published in 1966. Since that time guidelines were modified and improved numerously by two leading world expert organizations ERC (European Resuscitation Council) and AHA (American Heart Association) and published in a new version every 5 years. Currently 2010 guidelines should be obliged. In this paper authors made an attempt to present history of development of resuscitation techniques and methods and assess the influence of previous lifesaving methods on nowadays technologies, equipment and guidelines which allow to help those women and men whose life is in danger due to sudden cardiac arrest. © 2015 MEDPRESS.

  16. CALCULATIONS OF DOUBLE IMPURITY DIFFUSION IN INTEGRATED CIRCUIT PRODUCTION

    Directory of Open Access Journals (Sweden)

    V. A. Bondarev

    2005-01-01

    Full Text Available Analytical formulae for calculating simultaneous diffusion of two impurities in silicon are presented. The formulae are based on analytical solutions of diffusion equations that have been obtained for the first time by the author while using some special mathematical functions. In contrast to usual formal mathematical approaches, new functions are determined in the process of investigation of real physical models. Algorithms involve some important relations from thermodynamics of irreversible processes and also variational thermodynamic functionals that were previously obtained by the author for transfer processes. Calculations considerably reduce the time required for development of new integrated circuits. 

  17. Smile esthetics: calculated beauty?

    Science.gov (United States)

    Lecocq, Guillaume; Truong Tan Trung, Lisa

    2014-06-01

    Esthetic demand from patients continues to increase. Consequently, the treatments we offer are moving towards more discreet or invisible techniques using lingual brackets in order to achieve harmonious, balanced results in line with our treatment goals. As orthodontists, we act upon relationships between teeth and bone. And the equilibrium they create impacts the entire face via the smile. A balanced smile is essential to an esthetic outcome and is governed by rules, which guide both the practitioner and patient. A smile can be described in terms of mathematical ratios and proportions but beauty cannot be calculated. For the smile to sit harmoniously within the face, we need to take into account facial proportions and the possibility of their being modified by our orthopedic appliances or by surgery. Copyright © 2014 CEO. Published by Elsevier Masson SAS. All rights reserved.

  18. What was hidden in the Publisher's Archive

    DEFF Research Database (Denmark)

    Mai, Anne-Marie

    2015-01-01

    On the Danish Author Elsa Gress and her correspondence on American Literature with the Publisher, K. E. Hermann, Arena.......On the Danish Author Elsa Gress and her correspondence on American Literature with the Publisher, K. E. Hermann, Arena....

  19. Management strategies to improve the academic performance of previously disadvantaged secondary schools in the grade 12 examination.

    OpenAIRE

    2004-01-01

    The importance of secondary school education in moulding learners into responsible citizens of tomorrow cannot be ignored or undermined. Secondary school education is the stepping stone for unlimited opportunities for learners to explore the career choices that they have to pursue further in their lives. Every year the performance of secondary schools in the matric examination come under spotlight as soon as the results are published. Many schools in the previously disadvantaged communities p...

  20. Calculating patient specific doses in X-ray diagnostics and from radiopharmaceuticals

    International Nuclear Information System (INIS)

    Lampinen, J.

    2000-01-01

    The risk associated with exposure to ionising radiation is dependent on the characteristics of the exposed individual. The size and structure of the individual influences the absorbed dose distribution in the organs. Traditional methods used to calculate the patient organ doses are based on standardised calculation phantoms, which neglect the variance of the patient size or even sex. When estimating the radiation dose of an individual patient, patient specific calculation methods must be used. Methods for patient specific dosimetry in the fields of X-ray diagnostics and diagnostic and therapeutic use of radiopharmaceuticals were proposed in this thesis. A computer program, ODS-60, for calculating organ doses from diagnostic X-ray exposures was presented. The calculation is done in a patient specific phantom with depth dose and profile algorithms fitted to Monte Carlo simulation data from a previous study. Improvements to the version reported earlier were introduced, e.g. bone attenuation was implemented. The applicability of the program to determine patient doses from complex X-ray examinations (barium enema examination) was studied. The conversion equations derived for female and male patients as a function of patient weight gave the smallest deviation from the actual patient doses when compared to previous studies. Another computer program, Intdose, was presented for calculation of the dose distribution from radiopharmaceuticals. The calculation is based on convolution of an isotope specific point dose kernel with activity distribution, obtained from single photon emission computed tomography (SPECT) images. Anatomical information is taken from magnetic resonance (MR) or computed tomography (CT) images. According to a phantom study, Intdose agreed within 3 % with measurements. For volunteers administered diagnostic radiopharmaceuticals, the results given by Intdose were found to agree with traditional methods in cases of medium sized patients. For patients

  1. Navigating the heavy seas of online publishing

    DEFF Research Database (Denmark)

    Carpentier, Samuel; Dörry, Sabine; Lord, Sébastien

    2015-01-01

    Articulo – Journal of Urban Research celebrates its 10th anniversary! To celebrate this milestone, the current editors discuss the numerous changes and challenges related to publishing a peer-reviewed online journal. Since 2005, Articulo has progressively become more international, more professio......Articulo – Journal of Urban Research celebrates its 10th anniversary! To celebrate this milestone, the current editors discuss the numerous changes and challenges related to publishing a peer-reviewed online journal. Since 2005, Articulo has progressively become more international, more...... rough seas of online publishing in the future....

  2. Technical Services in the Age of Electronic Publishing.

    Science.gov (United States)

    Brownrigg, Edwin; And Others

    1984-01-01

    Examination of the traditional library technical services functions and how they may change with the advent of widespread computer-based electronic publishing emphasizes ways in which technical services will have to adapt in electronic publishing environment. Implications of electronic publishing for library management and budgeting are explored.…

  3. ADHD and math - The differential effect on calculation and estimation.

    Science.gov (United States)

    Ganor-Stern, Dana; Steinhorn, Ofir

    2018-05-31

    Adults with ADHD were compared to controls when solving multiplication problems exactly and when estimating the results of multidigit multiplication problems relative to reference numbers. The ADHD participants were slower than controls in the exact calculation and in the estimation tasks, but not less accurate. The ADHD participants were similar to controls in showing enhanced accuracy and speed for smaller problem sizes, for trials in which the reference numbers were smaller (vs. larger) than the exact answers and for reference numbers that were far (vs. close) from the exact answer. The two groups similarly used the approximated calculation and the sense of magnitude strategies. They differed however in strategy execution, mainly of the approximated calculation strategy, which requires working memory resources. The increase in reaction time associated with using the approximated calculation strategy was larger for the ADHD compared to the control participants. Thus, ADHD seems to selectively impair calculation processes in estimation tasks that rely on working memory, but it does not hamper estimation skills that are based on sense of magnitude. The educational implications of these findings are discussed. Copyright © 2018. Published by Elsevier B.V.

  4. CALCULATION ALGORITHM TRUSS UNDER CRANE BEAMS

    Directory of Open Access Journals (Sweden)

    N. K. Akaev1

    2016-01-01

    Full Text Available Aim.The task of reducing the deflection and increase the rigidity of single-span beams are made. In the article the calculation algorithm for truss crane girders is determined.Methods. To identify the internal effort required for the selection of cross section elements the design uses the Green's function.Results. It was found that the simplest truss system reduces deflection and increases the strength of design. The upper crossbar is subjected not only to bending and shear and compression work due to tightening tension. Preliminary determination of the geometrical characteristics of the crane farms elements are offered to make a comparison with previous similar configuration of his farms, using a simple approximate calculation methods.Conclusion.The method of sequential movements (incrementally the two bridge cranes along the length of the upper crossbar truss beams is suggested. We give the corresponding formulas and conditions of safety.

  5. Survival Prediction in Patients Undergoing Open-Heart Mitral Valve Operation After Previous Failed MitraClip Procedures.

    Science.gov (United States)

    Geidel, Stephan; Wohlmuth, Peter; Schmoeckel, Michael

    2016-03-01

    The objective of this study was to analyze the results of open heart mitral valve operations for survival prediction in patients with previously unsuccessful MitraClip procedures. Thirty-three consecutive patients who underwent mitral valve surgery in our institution were studied. At a median of 41 days, they had previously undergone one to five futile MitraClip implantations. At the time of their operations, patients were 72.6 ± 10.3 years old, and the calculated risk, using the European System for Cardiac Operative Risk Evaluation (EuroSCORE) II, was a median of 26.5%. Individual outcomes were recorded, and all patients were monitored postoperatively. Thirty-day mortality was 9.1%, and the overall survival at 2.2 years was 60.6%. Seven cardiac-related and six noncardiac deaths occurred. Univariate survival regression models demonstrated a significant influence of the following variables on survival: EuroSCORE II (p = 0.0022), preoperative left ventricular end-diastolic dimension (p = 0.0052), left ventricular ejection fraction (p = 0.0249), coronary artery disease (p = 0.0385), and severe pulmonary hypertension (p = 0.0431). Survivors showed considerable improvements in their New York Heart Association class (p < 0.0001), left ventricular ejection fraction (p = 0.0080), grade of mitral regurgitation (p = 0.0350), and mitral valve area (p = 0.0486). Survival after mitral repair was not superior to survival after replacement. Indications for surgery after failed MitraClip procedures must be considered with the greatest of care. Variables predicting postoperative survival should be taken into account regarding the difficult decision as to whether to operate or not. Our data suggest that replacement of the pretreated mitral valve is probably the more reasonable concept rather than complex repairs. When the EuroSCORE II at the time of surgery exceeds 30%, conservative therapy is advisable. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc

  6. Monte Carlo calculations supporting patient plan verification in proton therapy

    Directory of Open Access Journals (Sweden)

    Thiago Viana Miranda Lima

    2016-03-01

    Full Text Available Patient’s treatment plan verification covers substantial amount of the quality assurance (QA resources, this is especially true for Intensity Modulated Proton Therapy (IMPT. The use of Monte Carlo (MC simulations in supporting QA has been widely discussed and several methods have been proposed. In this paper we studied an alternative approach from the one being currently applied clinically at Centro Nazionale di Adroterapia Oncologica (CNAO. We reanalysed the previously published data (Molinelli et al. 2013, where 9 patient plans were investigated in which the warning QA threshold of 3% mean dose deviation was crossed. The possibility that these differences between measurement and calculated dose were related to dose modelling (Treatment Planning Systems (TPS vs MC, limitations on dose delivery system or detectors mispositioning was originally explored but other factors such as the geometric description of the detectors were not ruled out. For the purpose of this work we compared ionisation-chambers measurements with different MC simulations results. It was also studied some physical effects introduced by this new approach for example inter detector interference and the delta ray thresholds. The simulations accounting for a detailed geometry typically are superior (statistical difference - p-value around 0.01 to most of the MC simulations used at CNAO (only inferior to the shift approach used. No real improvement were observed in reducing the current delta-ray threshold used (100 keV and no significant interference between ion chambers in the phantom were detected (p-value 0.81. In conclusion, it was observed that the detailed geometrical description improves the agreement between measurement and MC calculations in some cases. But in other cases position uncertainty represents the dominant uncertainty. The inter chamber disturbance was not detected for the therapeutic protons energies and the results from the current delta threshold are

  7. Does previous abdominal surgery affect the course and outcomes of laparoscopic bariatric surgery?

    Science.gov (United States)

    Major, Piotr; Droś, Jakub; Kacprzyk, Artur; Pędziwiatr, Michał; Małczak, Piotr; Wysocki, Michał; Janik, Michał; Walędziak, Maciej; Paśnik, Krzysztof; Hady, Hady Razak; Dadan, Jacek; Proczko-Stepaniak, Monika; Kaska, Łukasz; Lech, Paweł; Michalik, Maciej; Duchnik, Michał; Kaseja, Krzysztof; Pastuszka, Maciej; Stepuch, Paweł; Budzyński, Andrzej

    2018-03-26

    Global experiences in general surgery suggest that previous abdominal surgery may negatively influence different aspects of perioperative care. As the incidence of bariatric procedures has recently increased, it is essential to assess such correlations in bariatric surgery. To assess whether previous abdominal surgery influences the course and outcomes of laparoscopic bariatric surgery. Seven referral bariatric centers in Poland. We conducted a retrospective analysis of 2413 patients; 1706 patients who underwent laparoscopic sleeve gastrectomy (SG) or Roux-en-Y gastric bypass (RYGB) matched the inclusion criteria. Patients with no history of abdominal surgery were included as group 1, while those who had undergone at least 1 abdominal surgery were included as group 2. Group 2 had a significantly prolonged median operation time for RYGB (P = .012), and the longest operation time was observed in patients who had previously undergone surgeries in both the upper and lower abdomen (P = .002). Such a correlation was not found in SG cases (P = .396). Groups 1 and 2 had similar rates of intraoperative adverse events and postoperative complications (P = .562 and P = .466, respectively). Group 2 had a longer median duration of hospitalization than group 1 (P = .034), while the readmission rate was similar between groups (P = .079). There was no significant difference between groups regarding the influence of the long-term effects of bariatric treatment on weight loss (percentage of follow-up was 55%). Previous abdominal surgery prolongs the operative time of RYGB and the duration of postoperative hospitalization, but does not affect the long-term outcomes of bariatric treatment. Copyright © 2018 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  8. Supplementary neutron-flux calculations for the ORNL Pool Critical Assembly Pressure Vessel Facility

    International Nuclear Information System (INIS)

    Maudlin, P.J.; Maerker, R.E.

    1982-01-01

    A three-dimensional Monte Carlo calculation using the MORSE code was performed to validate a procedure previously adopted in the ORNL discrete ordinate analysis of measurements made in the ORNL Pool Critical Assembly Pressure Vessel Facility. The results of these flux calculations agree, within statistical undertainties of about 5%, with those obtained from a discrete ordinate analysis employing the same procedure. This study therefore concludes that the procedure for combining several one- and two-dimensional discrete ordinate calculations into a three-dimensional flux is sufficiently accurate that it does not account for the existing discrepancies observed between calculations and measurements in this facility

  9. Supplementary neutron-flux calculations for the ORNL Pool Critical Assembly Pressure Vessel Facility

    Energy Technology Data Exchange (ETDEWEB)

    Maudlin, P.J.; Maerker, R.E.

    1982-01-01

    A three-dimensional Monte Carlo calculation using the MORSE code was performed to validate a procedure previously adopted in the ORNL discrete ordinate analysis of measurements made in the ORNL Pool Critical Assembly Pressure Vessel Facility. The results of these flux calculations agree, within statistical undertainties of about 5%, with those obtained from a discrete ordinate analysis employing the same procedure. This study therefore concludes that the procedure for combining several one- and two-dimensional discrete ordinate calculations into a three-dimensional flux is sufficiently accurate that it does not account for the existing discrepancies observed between calculations and measurements in this facility.

  10. Performance of Nigerian Publishers as Innovation agents to ...

    African Journals Online (AJOL)

    There have been arguments suggesting that the low rate of adoption of digital publishing innovations in Nigeria could be attributed to the conservative activities of local publishers. This study, therefore, set out to investigate the role played by local Nigerian Publishers towards the acquisition and adoption of digital resources ...

  11. Publishing scientific papers in scholarly journals | Ayensu | Journal ...

    African Journals Online (AJOL)

    The rigorous demand of peer review has been emphasized to illustrate the academic nature of scholarly publishing. The quality attributes of a manuscript in terms of ... The rules, norms, ethics and standards of publishing in relation to copyrights and plagiarism are discussed. The published paper is recognized as the ...

  12. Calculation of emission from hydrogenic ions in super liquid density plasmas

    International Nuclear Information System (INIS)

    Bailey, D.S.; Valeo, E.J.

    1976-01-01

    Previous calculations of line emission were extended to higher density, lower temperature plasmas, typical of those expected in early ablative compression experiments. Emission from Ne-seeded fuel was analyzed in order to diagnose the density and temperature of the compressed core. The Stark/Doppler broadened emission profile is calculated for the H-like Ne resonance line. The observable lineshape is then obtained by time-averaging over expected density and temperature profiles and by including the effects of radiative transfer

  13. Published journal article with data

    Data.gov (United States)

    U.S. Environmental Protection Agency — published journal article. This dataset is associated with the following publication: Schumacher, B., J. Zimmerman, J. Elliot, and G. Swanson. The Effect of...

  14. HEART TRANSPLANTATION IN PATIENTS WITH PREVIOUS OPEN HEART SURGERY

    Directory of Open Access Journals (Sweden)

    R. Sh. Saitgareev

    2016-01-01

    Full Text Available Heart Transplantation (HTx to date remains the most effective and radical method of treatment of patients with end-stage heart failure. The defi cit of donor hearts is forcing to resort increasingly to the use of different longterm mechanical circulatory support systems, including as a «bridge» to the follow-up HTx. According to the ISHLT Registry the number of recipients underwent cardiopulmonary bypass surgery increased from 40% in the period from 2004 to 2008 to 49.6% for the period from 2009 to 2015. HTx performed in repeated patients, on the one hand, involves considerable technical diffi culties and high risks; on the other hand, there is often no alternative medical intervention to HTx, and if not dictated by absolute contradictions the denial of the surgery is equivalent to 100% mortality. This review summarizes the results of a number of published studies aimed at understanding the immediate and late results of HTx in patients, previously underwent open heart surgery. The effect of resternotomy during HTx and that of the specifi c features associated with its implementation in recipients previously operated on open heart, and its effects on the immediate and long-term survival were considered in this review. Results of studies analyzing the risk factors for perioperative complications in repeated recipients were also demonstrated. Separately, HTx risks after implantation of prolonged mechanical circulatory support systems were examined. The literature does not allow to clearly defi ning the impact factor of earlier performed open heart surgery on the course of perioperative period and on the prognosis of survival in recipients who underwent HTx. On the other hand, subject to the regular fl ow of HTx and the perioperative period the risks in this clinical situation are justifi ed as a long-term prognosis of recipients previously conducted open heart surgery and are comparable to those of patients who underwent primary HTx. Studies

  15. Transport calculation of medium-energy protons and neutrons by Monte Carlo method

    International Nuclear Information System (INIS)

    Ban, Syuuichi; Hirayama, Hideo; Katoh, Kazuaki.

    1978-09-01

    A Monte Carlo transport code, ARIES, has been developed for protons and neutrons at medium energy (25 -- 500 MeV). Nuclear data provided by R.G. Alsmiller, Jr. were used for the calculation. To simulate the cascade development in the medium, each generation was represented by a single weighted particle and an average number of emitted particles was used as the weight. Neutron fluxes were stored by the collisions density method. The cutoff energy was set to 25 MeV. Neutrons below the cutoff were stored to be used as the source for the low energy neutron transport calculation upon the discrete ordinates method. Then transport calculations were performed for both low energy neutrons (thermal -- 25 MeV) and secondary gamma-rays. Energy spectra of emitted neutrons were calculated and compared with those of published experimental and calculated results. The agreement was good for the incident particles of energy between 100 and 500 MeV. (author)

  16. A compendium of P- and S-wave velocities from surface-to-borehole logging; summary and reanalysis of previously published data and analysis of unpublished data

    Science.gov (United States)

    Boore, David M.

    2003-01-01

    For over 28 years, the U.S. Geological Survey (USGS) has been acquiring seismic velocity and geologic data at a number of locations in California, many of which were chosen because strong ground motions from earthquakes were recorded at the sites. The method for all measurements involves picking first arrivals of P- and S-waves from a surface source recorded at various depths in a borehole (as opposed to noninvasive methods, such as the SASW method [e.g., Brown et al., 2002]). The results from most of the sites are contained in a series of U.S. Geological Survey Open-File Reports (see References). Until now, none of the results have been available as computer files, and before 1992 the interpretation of the arrival times was in terms of piecemeal interval velocities, with no attempt to derive a layered model that would fit the travel times in an overall sense (the one exception is Porcella, 1984). In this report I reanalyze all of the arrival times in terms of layered models for P- and for S-wave velocities at each site, and I provide the results as computer files. In addition to the measurements reported in the open-file reports, I also include some borehole results from other reports, as well as some results never before published. I include data for 277 boreholes (at the time of this writing; more will be added to the web site as they are obtained), all in California (I have data from boreholes in Washington and Utah, but these will be published separately). I am also in the process of interpreting travel time data obtained using a seismic cone penetrometer at hundreds of sites; these data can be interpreted in the same way of those obtained from surface-to-borehole logging. When available, the data will be added to the web site (see below for information on obtaining data from the World Wide Web (WWW)). In addition to the basic borehole data and results, I provide information concerning strong-motion stations that I judge to be close enough to the boreholes

  17. Where on earth to publish? A sample survey comparing traditional and open access publishing in the oncological field.

    Science.gov (United States)

    Poltronieri, Elisabetta; Bravo, Elena; Camerini, Tiziana; Ferri, Maurizio; Rizzo, Roberto; Solimini, Renata; Cognetti, Gaetana

    2013-01-22

    The paper intends to help scientific authors to make the best choice of journals in which to publish, by describing and comparing journal features in the area of oncology. For this purpose, the authors identified impact factor (IF) ranking, cost options and copyright conditions offered to authors wishing to publish in full open access (OA), subscription-based or hybrid journals. Data referring to articles published in 2010 by three Italian research institutions (National Institute of Health - Rome (ISS), Regina Elena National Cancer Institute - Rome (IRE), National Cancer Institute - Milan (INT) in journals (78) managed according to different business models, all listed in the Journal Citation Reports, subject category Oncology, were collected and analysed. The journals surveyed were ranked according to IF, position in quartiles, publication charges, usage rights in published articles, self-archiving conditions in OAI-compliant repositories digital archives. Almost half (34) the journals surveyed were included in the first quartile, thus revealing authors' preference for journals with a high IF. The prevalent journal business model was the hybrid formula (based on subscriptions but also offering a paid OA option) with 51 journals, followed by subscription-based only journals accounting for 22, while just 5 full OA journals were identified. In general, no relationship was found between IF and article publication charges, in terms of correspondence between more expensive fees and higher IF. The issue of OA journals as compared with traditional subscription-based journals is highly debated among stakeholders: library administrators facing financial restrictions, authors seeking to locate the best outlet for their research, publishers wishing to increase their revenues by offering journals with wider appeal. Against this background, factors such as the quest for alternatives to high-cost business models, investments in setting up institutional repositories hosting the

  18. Open Access publishing in physics gains momentum

    CERN Multimedia

    2006-01-01

    The first meeting of European particle physics funding agencies took place on 3 November at CERN to establish a consortium for Open Access publishing in particle physics, SCOAP3 (Sponsoring Consortium for Open Access Publishing in Particle Physics). Open Access could transform the academic publishing world, with a great impact on research. The traditional model of research publication is funded through reader subscriptions. Open Access will turn this model on its head by changing the funding structure of research results, without increasing the overall cost of publishing. Instead of demanding payment from readers, publications will be distributed free of charge, financed by funding agencies via laboratories and the authors. This new concept will bring greater benefits and broaden opportunities for researchers and funding agencies by providing unrestricted distribution of the results of publicly funded research. The meeting marked a positive step forward, with international support from laboratories, fundin...

  19. Data Publishing - View from the Front

    Science.gov (United States)

    Carlson, David; Pfeiffenberger, Hans

    2014-05-01

    As data publishing journals - Earth System Science Data (ESSD, Copernicus, since 2009), Geophysical Data Journal (GDJ, Wiley, recent) and Scientific Data (SD, Nature Publishing Group, anticipated from May 2014) - expose data sets, implement data description and data review practices, and develop partnerships with data centres and data providers, we anticipate substantial benefits for the broad earth system and environmental research communities but also substantial challenges for all parties. A primary advantage emerges from open access to convergent data: subsurface hydrographic data near Antarctica, for example, now available for combination and comparison with nearby atmospheric data (both documented in ESSD), basin-scale precipitation data (accessed through GDJ) for comparison and interpolation with long-term global precipitation records (accessed from ESSD), or, imagining not too far into the future, stomach content and abundance data for European fish (from ESSD) linked to genetic or nutritional data (from SD). In addition to increased opportunity for discovery and collaboration, we also notice parallel developments of new tools for (published) data visualization and display and increasing acceptance of data publication as a useful and anticipated dissemination step included in project- and institution-based data management plans. All parties - providers, publishers and users - will benefit as various indexing services (SCI, SCOPUS, DCI etc.) acknowledge the creative, intellectual and meritorious efforts of data preparation and data provision. The challenges facing data publication, in most cases very familiar to the data community but made more acute by the advances in data publishing, include diverging metadata standards (among biomedical, green ocean modeling and meteorological communities, for example), adhering to standards and practices for permanent identification while also accommodating 'living' data, and maintaining prompt but rigorous review and

  20. Exploring new frontiers of electronic publishing in biomedical science.

    Science.gov (United States)

    Ng, K H

    2009-03-01

    Publishing is a hallmark of good scientific research. The aim of publishing is to disseminate new research knowledge and findings as widely as possible in a timely and efficient manner. Scientific publishing has evolved over the years with the advent of new technologies and demands. This paper presents a brief discussion on the history and status of electronic publishing. The Open Access Initiative was created with the aim of overcoming various limitations faced by traditional publishing access models. Innovations have opened up possibilities for electronic publishing to increase the accessibility, visibility, interactivity and usability of research. A glimpse of the future publishing landscape has revealed that scientific communication and research will not remain the same. The internet and advances in information technology will have an impact on the research landscape, scholarly publishing, research policy and funding, dissemination of knowledge, and the progress of science as a whole.

  1. 46 CFR 503.11 - Materials to be published.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Materials to be published. 503.11 Section 503.11... in the Federal Register § 503.11 Materials to be published. The Commission shall separately state and concurrently publish the following materials in the Federal Register for the guidance of the public: (a...

  2. The appropriateness of one-dimensional Yucca Mountain hydrologic calculations

    International Nuclear Information System (INIS)

    Eaton, R.R.

    1993-07-01

    This report brings into focus the results of numerous studies that have addressed issues associated with the validity of assumptions which are used to justify reducing the dimensionality of numerical calculations of water flow through Yucca Mountain, NV. it is shown that, in many cases, one-dimensional modeling is more rigorous than previously assumed

  3. Publishing in Educational Psychology Journals: Comments from Editors

    Science.gov (United States)

    Nihalani, Priya K.; Mayrath, Michael C.

    2008-01-01

    The following paper emphasizes the importance of publishing and learning how to publish in educational psychology journals. We have compiled a set of recommendations based on advice from editors in the field and several other sources on how to publish. Additionally, this paper provides a step-by-step guide that graduate students and junior faculty…

  4. DIY eBooks: collaborative publishing made easy

    Science.gov (United States)

    Battle, Steve; Vitali, Fabio; Di Iorio, Angelo; Bernius, Matthew; Henderson, Tona; Choudhury, Manu

    2010-02-01

    Print is undergoing a revolution as significant as the invention of the printing press. The emergence of ePaper is a major disruption for the printing industry; defining a new medium with the potential to redefine publishing in a way that is as different to today's Web, as the Web is to traditional print. In this new eBook ecosystem we don't just see users as consumers of eBooks, but as active prosumers able to collaboratively create, customize and publish their own eBooks. We describe a transclusive, collaborative publishing framework for the web.

  5. [Medical publishing in Norway 1905-2005].

    Science.gov (United States)

    Nylenna, Magne; Larsen, Øivind

    2005-06-02

    The nation-building process in Norway took mainly place before the Norwegian-Swedish union came to a close in 1905. This was not a dramatic change, though the end of the union did bring a lift to Norwegian national consciousness. In 1905 there were three general medical journals in Norway and approximately 1200 doctors. German was the most important language of international science, but most scientific publishing was done in Norwegian. After the Second World War, English became the dominating language of scientific communication. Twentieth-century medicine and medical publishing was an era of specialisation and internationalisation. Norwegian medicine has to a large extent been internationalised through Nordic cooperation, with the Nordic specialist journals being of particular importance. With increasing professionalism in research, international English-language journals have become the major channels of communication, though several Norwegian-language journals (on paper or on the internet) have been established and are of crucial importance to a national identity within medical specialties. In 2005 there is only one general medical journal in Norwegian, in a country with approximately 20,000 doctors. A national identity related to medical publishing is not given much attention, though national medicine is still closely tied in with national culture. Good clinical practice should be based on a firm knowledge of local society and local tradition. This is a challenge in contemporary medical publishing.

  6. Analytical 3-D force calculation of a transverse flux machine

    NARCIS (Netherlands)

    Kremers, M.F.J.; Paulides, J.J.H.; Janssen, J.L.G.; Lomonova, E.A.

    2014-01-01

    Transverse Flux Machine (TFM) designs are, in general, based on 3-D Finite Element Methods (FEM). Previous attempts to perform analytical designs have been limited to Magnetic Equivalent Circuits (MEC). In this paper, for the first time, propulsion force calculation of TFMs is performed using an

  7. In situ measurements for calculating evapotranspiration values using neutron moisture meter

    International Nuclear Information System (INIS)

    El-Gendy, R.W.; El-Moniem, M.; Massoud, M.

    2000-01-01

    Field experiment was conducted at the Wadi Sudr area, south Sinai, Egypt. Two types of residual animal farm (i.e., goat and camel)used wheat crop, beside control (no manure). The neutron scattering method and tensiometers were used to calculate the components of soil moisture depletion, evapotranspiration (ET) and drainage rate (DR). Evapotranspiration (ET) was determined by four methods, i.e, soil moisture depletion (SMD), Active rooting depth (ARD) at 80% SMD, active rooting depth (ARD) at zero hydraulic potential gradient (dh/dz = 0) and Blaney - Criddle formula (climatically data) using published crop coefficient (Kc) ET values for goat and camel residuals and control treatments were found to be 5.59, 5.54 and 6.80; 4.48, 4.43 and 5.44; 5.01, 4.11 and 11.66 and 4.5 mm day 1 for all treatments using the previous four methods respectively. The data obtained also showed that ET values under organic manure treatments were lower than control treatment, while the dry weight of wheat crop was higher in the manure-treated plots relative to the control. These less irrigation water requirements are needed to be applied to manure-treated plots and this should reduce the opportunity of soil deterioration if saline water is used

  8. Calculation of relativistic model stars using Regge calculus

    International Nuclear Information System (INIS)

    Porter, J.

    1987-01-01

    A new approach to the Regge calculus, developed in a previous paper, is used in conjunction with the velocity potential version of relativistic fluid dynamics due to Schutz [1970, Phys. Rev., D, 2, 2762] to calculate relativistic model stars. The results are compared with those obtained when the Tolman-Oppenheimer-Volkov equations are solved by other numerical methods. The agreement is found to be excellent. (author)

  9. Calculation of statistic estimates of kinetic parameters from substrate uncompetitive inhibition equation using the median method

    Directory of Open Access Journals (Sweden)

    Pedro L. Valencia

    2017-04-01

    Full Text Available We provide initial rate data from enzymatic reaction experiments and tis processing to estimate the kinetic parameters from the substrate uncompetitive inhibition equation using the median method published by Eisenthal and Cornish-Bowden (Cornish-Bowden and Eisenthal, 1974; Eisenthal and Cornish-Bowden, 1974. The method was denominated the direct linear plot and consists in the calculation of the median from a dataset of kinetic parameters Vmax and Km from the Michaelis–Menten equation. In this opportunity we present the procedure to applicate the direct linear plot to the substrate uncompetitive inhibition equation; a three-parameter equation. The median method is characterized for its robustness and its insensibility to outlier. The calculations are presented in an Excel datasheet and a computational algorithm was developed in the free software Python. The kinetic parameters of the substrate uncompetitive inhibition equation Vmax, Km and Ks were calculated using three experimental points from the dataset formed by 13 experimental points. All the 286 combinations were calculated. The dataset of kinetic parameters resulting from this combinatorial was used to calculate the median which corresponds to the statistic estimator of the real kinetic parameters. A comparative statistical analyses between the median method and the least squares was published in Valencia et al. [3].

  10. Urethrotomy has a much lower success rate than previously reported.

    Science.gov (United States)

    Santucci, Richard; Eisenberg, Lauren

    2010-05-01

    We evaluated the success rate of direct vision internal urethrotomy as a treatment for simple male urethral strictures. A retrospective chart review was performed on 136 patients who underwent urethrotomy from January 1994 through March 2009. The Kaplan-Meier method was used to analyze stricture-free probability after the first, second, third, fourth and fifth urethrotomy. Patients with complex strictures (36) were excluded from the study for reasons including previous urethroplasty, neophallus or previous radiation, and 24 patients were lost to followup. Data were available for 76 patients. The stricture-free rate after the first urethrotomy was 8% with a median time to recurrence of 7 months. For the second urethrotomy stricture-free rate was 6% with a median time to recurrence of 9 months. For the third urethrotomy stricture-free rate was 9% with a median time to recurrence of 3 months. For procedures 4 and 5 stricture-free rate was 0% with a median time to recurrence of 20 and 8 months, respectively. Urethrotomy is a popular treatment for male urethral strictures. However, the performance characteristics are poor. Success rates were no higher than 9% in this series for first or subsequent urethrotomy during the observation period. Most of the patients in this series will be expected to experience failure with longer followup and the expected long-term success rate from any (1 through 5) urethrotomy approach is 0%. Urethrotomy should be considered a temporizing measure until definitive curative reconstruction can be planned. 2010 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  11. Comparison of three methods of calculating strain in the mouse ulna in exogenous loading studies.

    Science.gov (United States)

    Norman, Stephanie C; Wagner, David W; Beaupre, Gary S; Castillo, Alesha B

    2015-01-02

    Axial compression of mouse limbs is commonly used to induce bone formation in a controlled, non-invasive manner. Determination of peak strains caused by loading is central to interpreting results. Load-strain calibration is typically performed using uniaxial strain gauges attached to the diaphyseal, periosteal surface of a small number of sacrificed animals. Strain is measured as the limb is loaded to a range of physiological loads known to be anabolic to bone. The load-strain relationship determined by this subgroup is then extrapolated to a larger group of experimental mice. This method of strain calculation requires the challenging process of strain gauging very small bones which is subject to variability in placement of the strain gauge. We previously developed a method to estimate animal-specific periosteal strain during axial ulnar loading using an image-based computational approach that does not require strain gauges. The purpose of this study was to compare the relationship between load-induced bone formation rates and periosteal strain at ulnar midshaft using three different methods to estimate strain: (A) Nominal strain values based solely on load-strain calibration; (B) Strains calculated from load-strain calibration, but scaled for differences in mid-shaft cross-sectional geometry among animals; and (C) An alternative image-based computational method for calculating strains based on beam theory and animal-specific bone geometry. Our results show that the alternative method (C) provides comparable correlation between strain and bone formation rates in the mouse ulna relative to the strain gauge-dependent methods (A and B), while avoiding the need to use strain gauges. Published by Elsevier Ltd.

  12. 15 CFR 10.13 - Withdrawal of a published standard.

    Science.gov (United States)

    2010-01-01

    ...) Before withdrawing a standard published under these procedures, the Director will review the relative... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Withdrawal of a published standard. 10... DEVELOPMENT OF VOLUNTARY PRODUCT STANDARDS § 10.13 Withdrawal of a published standard. (a) Standards published...

  13. Publisher Correction: On our bookshelf

    Science.gov (United States)

    Karouzos, Marios

    2018-03-01

    In the version of this Books and Arts originally published, the book title Spectroscopy for Amateur Astronomy was incorrect; it should have read Spectroscopy for Amateur Astronomers. This has now been corrected.

  14. Study Design Rigor in Animal-Experimental Research Published in Anesthesia Journals.

    Science.gov (United States)

    Hoerauf, Janine M; Moss, Angela F; Fernandez-Bustamante, Ana; Bartels, Karsten

    2018-01-01

    Lack of reproducibility of preclinical studies has been identified as an impediment for translation of basic mechanistic research into effective clinical therapies. Indeed, the National Institutes of Health has revised its grant application process to require more rigorous study design, including sample size calculations, blinding procedures, and randomization steps. We hypothesized that the reporting of such metrics of study design rigor has increased over time for animal-experimental research published in anesthesia journals. PubMed was searched for animal-experimental studies published in 2005, 2010, and 2015 in primarily English-language anesthesia journals. A total of 1466 publications were graded on the performance of sample size estimation, randomization, and blinding. Cochran-Armitage test was used to assess linear trends over time for the primary outcome of whether or not a metric was reported. Interrater agreement for each of the 3 metrics (power, randomization, and blinding) was assessed using the weighted κ coefficient in a 10% random sample of articles rerated by a second investigator blinded to the ratings of the first investigator. A total of 1466 manuscripts were analyzed. Reporting for all 3 metrics of experimental design rigor increased over time (2005 to 2010 to 2015): for power analysis, from 5% (27/516), to 12% (59/485), to 17% (77/465); for randomization, from 41% (213/516), to 50% (243/485), to 54% (253/465); and for blinding, from 26% (135/516), to 38% (186/485), to 47% (217/465). The weighted κ coefficients and 98.3% confidence interval indicate almost perfect agreement between the 2 raters beyond that which occurs by chance alone (power, 0.93 [0.85, 1.0], randomization, 0.91 [0.85, 0.98], and blinding, 0.90 [0.84, 0.96]). Our hypothesis that reported metrics of rigor in animal-experimental studies in anesthesia journals have increased during the past decade was confirmed. More consistent reporting, or explicit justification for absence

  15. Thermal Hydraulic Fortran Program for Steady State Calculations of Plate Type Fuel Research Reactors

    International Nuclear Information System (INIS)

    Khedr, H.

    2008-01-01

    The safety assessment of Research and Power Reactors is a continuous process over their life and that requires verified and validated codes. Power Reactor codes all over the world are well established and qualified against a real measuring data and qualified experimental facilities. These codes are usually sophisticated, require special skills and consume much more running time. On the other hand, most of the Research Reactor codes still requiring more data for validation and qualification. Therefore it is benefit for a regulatory body and the companies working in the area of Research Reactor assessment and design to have their own program that give them a quick judgment. The present paper introduces a simple one dimensional Fortran program called THDSN for steady state best estimate Thermal Hydraulic (TH) calculations of plate type fuel RRs. Beside calculating the fuel and coolant temperature distribution and pressure gradient in an average and hot channel the program calculates the safety limits and margins against the critical phenomena encountered in RR such as the burnout heat flux and the onset of flow instability. Well known TH correlations for calculating the safety parameters are used. THDSN program is verified by comparing its results for 2 and 10 MW benchmark reactors with that published in IAEA publications and good agreement is found. Also the program results are compared with those published for other programs such as PARET and TERMIC. An extension for this program is underway to cover the transient TH calculations

  16. Numerical method to calculate the quantum transmission, resonance and eigenvalue energies: application to a biased multibarrier systems

    Energy Technology Data Exchange (ETDEWEB)

    Maiz, F., E-mail: fethimaiz@gmail.com [University of Cartage, Nabeul Engineering Preparatory Institute, Merazka, 8000 Nabeul (Tunisia); King Khalid University, Faculty of Science, Physics Department, PO Box 9004, Abha 61413 (Saudi Arabia)

    2015-04-15

    A novel method to calculate the quantum transmission, resonance and eigenvalue energies forming the sub-bands structure of non-symmetrical, non-periodical semiconducting heterostructure potential has been proposed in this paper. The method can be applied on a multilayer system with varying thickness of the layer and effective mass of electrons and holes. Assuming an approximated effective mass and using Bastard's boundary conditions, Schrödinger equation at each media is solved and then using a confirmed recurrence method, the transmission and reflection coefficients and the energy quantification condition are expressed. They are simple combination of coupled equations. Schrödinger's equation solutions are Airy functions or plane waves, depending on the electrical potential energy slope. To illustrate the feasibility of the proposed method, the N barriers – (N−1) wells structure for N=3, 5, 8, 9, 17 and 35 are studied. All results show very good agreements with previously published results obtained from applying different methods on similar systems.

  17. 18th International Conference on Electronic Publishing

    CERN Document Server

    Dobreva, Milena

    2014-01-01

    The ways in which research data is used and handled continue to capture public attention and are the focus of increasing interest. Electronic publishing is intrinsic to digital data management, and relevant to the fields of data mining, digital publishing and social networks, with their implications for scholarly communication, information services, e-learning, e-business and the cultural heritage sector. This book presents the proceedings of the 18th International Conference on Electronic Publishing (ELPUB), held in Thessaloniki, Greece, in June 2014. The conference brings together researchers and practitioners to discuss the many aspects of electronic publishing, and the theme this year is 'Let's put data to use: digital scholarship for the next generation'. As well as examining the role of cultural heritage and service organisations in the creation, accessibility, duration and long-term preservation of data, it provides a discussion forum for the appraisal, citation and licensing of research data and the n...

  18. Promoting Diversity and Sustainability in the Scholarly Publishing Ecosystem: The University of Michigan's MPublishing Redefines the Role of Libraries in Publishing

    Science.gov (United States)

    Hawkins, Kevin S.

    2012-01-01

    MPublishing, the primary academic publishing enterprise of the University of Michigan, has united the various publishing activities of the university, all of which serve the needs of scholars and the university by fostering new publishing models that cannot exist where profit is the primary value. This article provides a brief description of…

  19. High prevalence of genetic variants previously associated with LQT syndrome in new exome data

    DEFF Research Database (Denmark)

    Refsgaard, Lena; Holst, Anders G; Sadjadieh, Golnaz

    2012-01-01

    To date, hundreds of variants in 13 genes have been associated with long QT syndrome (LQTS). The prevalence of LQTS is estimated to be between 1:2000 and 1:5000. The knowledge of genetic variation in the general population has until recently been limited, but newly published data from NHLBI GO...... variants KCNH2 P347S; SCN5A: S216L, V1951L; and CAV3 T78M in the control population (n=704) revealed prevalences comparable to those of ESP. Thus, we identified a much higher prevalence of previously LQTS-associated variants than expected in exome data from population studies. Great caution regarding...

  20. RETRACTION: Publishers' Note

    Science.gov (United States)

    post="(Executive Editor">Graeme Watt,

    2010-06-01

    Withdrawal of the paper "Was the fine-structure constant variable over cosmological time?" by L. D. Thong, N. M. Giao, N. T. Hung and T. V. Hung (EPL, 87 (2009) 69002) This paper has been formally withdrawn on ethical grounds because the article contains extensive and repeated instances of plagiarism. EPL treats all identified evidence of plagiarism in the published articles most seriously. Such unethical behaviour will not be tolerated under any circumstance. It is unfortunate that this misconduct was not detected before going to press. My thanks to Editor colleagues from other journals for bringing this fact to my attention.