Development of multimedia computer-based training for VXI integrated fuel monitors

International Nuclear Information System (INIS)

Keeffe, R.; Ellacott, T.; Truong, Q.S.

1999-01-01

The Canadian Safeguards Support Program has developed the VXI Integrated Fuel Monitor (VFIM) which is based on the international VXI instrument bus standard. This equipment is a generic radiation monitor which can be used in an integrated mode where several detection systems can be connected to a common system where information is collected, displayed, and analyzed via a virtual control panel with the aid of computers, trackball and computer monitor. The equipment can also be used in an autonomous mode as a portable radiation monitor with a very low power consumption. The equipment has been described at previous international symposia. Integration of several monitoring systems (bundle counter, core discharge monitor, and yes/no monitor) has been carried out at Wolsong 2. Performance results from one of the monitoring systems which was installed at CANDU nuclear stations are discussed in a companion paper at this symposium. This paper describes the development of an effective multimedia computer-based training package for the primary users of the equipment; namely IAEA inspectors and technicians. (author)

An integrating factor matrix method to find first integrals

International Nuclear Information System (INIS)

Saputra, K V I; Quispel, G R W; Van Veen, L

2010-01-01

In this paper we develop an integrating factor matrix method to derive conditions for the existence of first integrals. We use this novel method to obtain first integrals, along with the conditions for their existence, for two- and three-dimensional Lotka-Volterra systems with constant terms. The results are compared to previous results obtained by other methods.

Customer Integration during Innovation Development

DEFF Research Database (Denmark)

Pedrosa, Alex

2012-01-01

of companies’ growing interest in effectively collaborating with customers, research has investigated the importance of firm–customer interaction during innovation development. However, despite valuable insights into the performance-enhancing effects of customer integration, research has thus far overlooked......To stay viable, companies need to increase their innovation development investments over time. However, successful innovation development also cannot happen without customers, and thus companies seek opportunities to enhance their knowledge of current and future customer needs. As a result...... the activities companies should engage in when integrating customers during innovation development. Thus, this study investigates how and when customer-oriented companies engage in customer interaction during innovation development. Using a multiple case study design, this study examines four substantive cases...

Development of optical packet and circuit integrated ring network testbed.

Science.gov (United States)

Furukawa, Hideaki; Harai, Hiroaki; Miyazawa, Takaya; Shinada, Satoshi; Kawasaki, Wataru; Wada, Naoya

2011-12-12

We developed novel integrated optical packet and circuit switch-node equipment. Compared with our previous equipment, a polarization-independent 4 × 4 semiconductor optical amplifier switch subsystem, gain-controlled optical amplifiers, and one 100 Gbps optical packet transponder and seven 10 Gbps optical path transponders with 10 Gigabit Ethernet (10GbE) client-interfaces were newly installed in the present system. The switch and amplifiers can provide more stable operation without equipment adjustments for the frequent polarization-rotations and dynamic packet-rate changes of optical packets. We constructed an optical packet and circuit integrated ring network testbed consisting of two switch nodes for accelerating network development, and we demonstrated 66 km fiber transmission and switching operation of multiplexed 14-wavelength 10 Gbps optical paths and 100 Gbps optical packets encapsulating 10GbE frames. Error-free (frame error rate optical packets of various packet lengths and packet rates, and stable operation of the network testbed was confirmed. In addition, 4K uncompressed video streaming over OPS links was successfully demonstrated. © 2011 Optical Society of America

Market Integration Predicts Human Gut Microbiome Attributes across a Gradient of Economic Development.

Science.gov (United States)

Stagaman, Keaton; Cepon-Robins, Tara J; Liebert, Melissa A; Gildner, Theresa E; Urlacher, Samuel S; Madimenos, Felicia C; Guillemin, Karen; Snodgrass, J Josh; Sugiyama, Lawrence S; Bohannan, Brendan J M

2018-01-01

Economic development is marked by dramatic increases in the incidence of microbiome-associated diseases, such as autoimmune diseases and metabolic syndromes, but the lifestyle changes that drive alterations in the human microbiome are not known. We measured market integration as a proxy for economically related lifestyle attributes, such as ownership of specific market goods that index degree of market integration and components of traditional and nontraditional (more modern) house structure and infrastructure, and profiled the fecal microbiomes of 213 participants from a contiguous, indigenous Ecuadorian population. Despite relatively modest differences in lifestyle across the population, greater economic development correlated with significantly lower within-host diversity, higher between-host dissimilarity, and a decrease in the relative abundance of the bacterium Prevotella . These microbiome shifts were most strongly associated with more modern housing, followed by reduced ownership of traditional subsistence lifestyle-associated items. IMPORTANCE Previous research has reported differences in the gut microbiome between populations residing in wealthy versus poorer countries, leading to the assertion that lifestyle changes associated with economic development promote changes in the gut microbiome that promote the proliferation of microbiome-associated diseases. However, a direct relationship between economic development and the gut microbiome has not previously been shown. We surveyed the gut microbiomes of a single indigenous population undergoing economic development and found significant associations between features of the gut microbiome and lifestyle changes associated with economic development. These findings suggest that even the earliest stages of economic development can drive changes in the gut microbiome, which may provide a warning sign for the development of microbiome-associated diseases.

Integrating ICT in Kenyan Secondary Schools: An Exploratory Case Study of a Professional Development Programme

Science.gov (United States)

Tondeur, Jo; Krug, Don; Bill, Mike; Smulders, Maaike; Zhu, Chang

2015-01-01

This study explores the introduction of Information and Communication Technology (ICT) in Kenyan secondary schools. Specifically, it is a case study of four schools with no previous access to ICT. The professional development programme from which data for this study were drawn was designed to support teachers learning to integrate ICT in the…

Barriers towards integrated product development

DEFF Research Database (Denmark)

Sommer, Anita Friis; Dukovska-Popovska, Iskra; Steger-Jensen, Kenn

2014-01-01

The basis for product development in many large industrial companies is a traditional project management method positing non-overlapping phases, independent activities, and a dedicated project team. Research findings indicate that integrated product development methods increase performance compared...

Integrated development environment for multi-core systems

Directory of Open Access Journals (Sweden)

Krunić Momčilo V.

2014-01-01

Full Text Available Development of the software application that provides comfortable working environment of embedded software applications was always a difficult task to achieve. To reach this goal it was necessary to integrate all specific tools designed for that purpose. This paper describes Integrated Development Environment (IDE that was developed to meet all specific needs of a software development for the family of multi-core target platforms designed for a digital signal processing in Cirrus Logic Company. Eclipse platform and RCP (Rich Client Platform was used as a basis, because it provides an extensible plug-in system for customizing the development environment. CLIDE (Cirrus Logic Integrated Development Environment represent the epilog of that effort, reliable IDE used for development of embedded applications. Validation of the solution is accomplished thru 2641 J Unit tests that validate most of the CLIDE's functionalities. Developed IDE (CLIDE significantly increases a quality of a software development for multi-core systems and reduces time-to-market, thereby justifying development costs.

An integrated development environment for PMESII model authoring, integration, validation, and debugging

Science.gov (United States)

Pioch, Nicholas J.; Lofdahl, Corey; Sao Pedro, Michael; Krikeles, Basil; Morley, Liam

2007-04-01

To foster shared battlespace awareness in Air Operations Centers supporting the Joint Forces Commander and Joint Force Air Component Commander, BAE Systems is developing a Commander's Model Integration and Simulation Toolkit (CMIST), an Integrated Development Environment (IDE) for model authoring, integration, validation, and debugging. CMIST is built on the versatile Eclipse framework, a widely used open development platform comprised of extensible frameworks that enable development of tools for building, deploying, and managing software. CMIST provides two distinct layers: 1) a Commander's IDE for supporting staff to author models spanning the Political, Military, Economic, Social, Infrastructure, Information (PMESII) taxonomy; integrate multiple native (third-party) models; validate model interfaces and outputs; and debug the integrated models via intuitive controls and time series visualization, and 2) a PMESII IDE for modeling and simulation developers to rapidly incorporate new native simulation tools and models to make them available for use in the Commander's IDE. The PMESII IDE provides shared ontologies and repositories for world state, modeling concepts, and native tool characterization. CMIST includes extensible libraries for 1) reusable data transforms for semantic alignment of native data with the shared ontology, and 2) interaction patterns to synchronize multiple native simulations with disparate modeling paradigms, such as continuous-time system dynamics, agent-based discrete event simulation, and aggregate solution methods such as Monte Carlo sampling over dynamic Bayesian networks. This paper describes the CMIST system architecture, our technical approach to addressing these semantic alignment and synchronization problems, and initial results from integrating Political-Military-Economic models of post-war Iraq spanning multiple modeling paradigms.

Designing a strategic plan development approach for integrated area development projects

NARCIS (Netherlands)

de Kort, Inge

2009-01-01

Increasingly, it has become evident that spatial problems can no longer be resolved in isolation, but should be solved in conjunction with other development-related issues. Interest in integrated area development is growing, and a more integrated planning approach is desired. In this design-based

Developing a comprehensive framework of community integration for people with acquired brain injury: a conceptual analysis.

Science.gov (United States)

Shaikh, Nusratnaaz M; Kersten, Paula; Siegert, Richard J; Theadom, Alice

2018-03-06

Despite increasing emphasis on the importance of community integration as an outcome for acquired brain injury (ABI), there is still no consensus on the definition of community integration. The aim of this study was to complete a concept analysis of community integration in people with ABI. The method of concept clarification was used to guide concept analysis of community integration based on a literature review. Articles were included if they explored community integration in people with ABI. Data extraction was performed by the initial coding of (1) the definition of community integration used in the articles, (2) attributes of community integration recognized in the articles' findings, and (3) the process of community integration. This information was synthesized to develop a model of community integration. Thirty-three articles were identified that met the inclusion criteria. The construct of community integration was found to be a non-linear process reflecting recovery over time, sequential goals, and transitions. Community integration was found to encompass six components including: independence, sense of belonging, adjustment, having a place to live, involved in a meaningful occupational activity, and being socially connected into the community. Antecedents to community integration included individual, injury-related, environmental, and societal factors. The findings of this concept analysis suggest that the concept of community integration is more diverse than previously recognized. New measures and rehabilitation plans capturing all attributes of community integration are needed in clinical practice. Implications for rehabilitation Understanding of perceptions and lived experiences of people with acquired brain injury through this analysis provides basis to ensure rehabilitation meets patients' needs. This model highlights the need for clinicians to be aware and assess the role of antecedents as well as the attributes of community integration itself to

An integrated framework for sustainable development goals

Directory of Open Access Journals (Sweden)

David Griggs

2014-12-01

Full Text Available The United Nations (UN Rio+20 summit committed nations to develop a set of universal sustainable development goals (SDGs to build on the millennium development goals (MDGs set to expire in 2015. Research now indicates that humanity's impact on Earth's life support system is so great that further global environmental change risks undermining long-term prosperity and poverty eradication goals. Socioeconomic development and global sustainability are often posed as being in conflict because of trade-offs between a growing world population, as well as higher standards of living, and managing the effects of production and consumption on the global environment. We have established a framework for an evidence-based architecture for new goals and targets. Building on six SDGs, which integrate development and environmental considerations, we developed a comprehensive framework of goals and associated targets, which demonstrate that it is possible, and necessary, to develop integrated targets relating to food, energy, water, and ecosystem services goals; thus providing a neutral evidence-based approach to support SDG target discussions. Global analyses, using an integrated global target equation, are close to providing indicators for these targets. Alongside development-only targets and environment-only targets, these integrated targets would ensure that synergies are maximized and trade-offs are managed in the implementation of SDGs.

Developing Pre-service Teachers' Technology Integration ...

African Journals Online (AJOL)

Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... This study investigated the ICT integration practices in pre-service teacher education in the School of Education at Makerere University (College of Education and ...

Developing Acquisition IS Integration Capabilities

DEFF Research Database (Denmark)

Wynne, Peter J.

2016-01-01

An under researched, yet critical challenge of Mergers and Acquisitions (M&A), is what to do with the two organisations’ information systems (IS) post-acquisition. Commonly referred to as acquisition IS integration, existing theory suggests that to integrate the information systems successfully......, an acquiring company must leverage two high level capabilities: diagnosis and integration execution. Through a case study, this paper identifies how a novice acquirer develops these capabilities in anticipation of an acquisition by examining its use of learning processes. The study finds the novice acquirer...... applies trial and error, experimental, and vicarious learning processes, while actively avoiding improvisational learning. The results of the study contribute to the acquisition IS integration literature specifically by exploring it from a new perspective: the learning processes used by novice acquirers...

Integrated fault tree development environment

International Nuclear Information System (INIS)

Dixon, B.W.

1986-01-01

Probabilistic Risk Assessment (PRA) techniques are utilized in the nuclear industry to perform safety analyses of complex defense-in-depth systems. A major effort in PRA development is fault tree construction. The Integrated Fault Tree Environment (IFTREE) is an interactive, graphics-based tool for fault tree design. IFTREE provides integrated building, editing, and analysis features on a personal workstation. The design philosophy of IFTREE is presented, and the interface is described. IFTREE utilizes a unique rule-based solution algorithm founded in artificial intelligence (AI) techniques. The impact of the AI approach on the program design is stressed. IFTREE has been developed to handle the design and maintenance of full-size living PRAs and is currently in use

Development of a modular integrated control architecture for flexible manipulators. Final report

International Nuclear Information System (INIS)

Burks, B.L.; Battiston, G.

1994-01-01

In April 1994, ORNL and SPAR completed the joint development of a manipulator controls architecture for flexible structure controls under a CRADA between the two organizations. The CRADA project entailed design and development of a new architecture based upon the Modular Integrated Control Architecture (MICA) previously developed by ORNL. The new architecture, dubbed MICA-II, uses an object-oriented coding philosophy to provide a highly modular and expandable architecture for robotic manipulator control. This architecture can be readily ported to control of many different manipulator systems. The controller also provides a user friendly graphical operator interface and display of many forms of data including system diagnostics. The capabilities of MICA-II were demonstrated during oscillation damping experiments using the Flexible Beam Experimental Test Bed at Hanford

Integrated sustainable development and energy resource planning

OpenAIRE

Virgiliu NICULA

2011-01-01

Integrated sustainable development of a country cannot be conceived and begun without considering in an intricate tandem environmental protection and economic development. No one can exist without a natural material support of the life he or she enjoys. All economic development plans must include environmental and human civilization’s protection implicitly. Integrated resource planning must be done in an absolutely judicious manner, so we can all leave as a legacy for future generations both ...

Development of safety analysis technology for integral reactor

Energy Technology Data Exchange (ETDEWEB)

Sim, Suk K.; Song, J. H.; Chung, Y. J. and others

1999-03-01

Inherent safety features and safety system characteristics of the SMART integral reactor are investigated in this study. Performance and safety of the SMART conceptual design have been evaluated and confirmed through the performance and safety analyses using safety analysis system codes as well as a preliminary performance and safety analysis methodology. SMART design base events and their acceptance criteria are identified to develop a preliminary PIRT for the SMART integral reactor. Using the preliminary PIRT, a set of experimental program for the thermal hydraulic separate effect tests and the integral effect tests was developed for the thermal hydraulic model development and the system code validation. Safety characteristics as well as the safety issues of the integral reactor has been identified during the study, which will be used to resolve the safety issues and guide the regulatory criteria for the integral reactor. The results of the performance and safety analyses performed during the study were used to feedback for the SMART conceptual design. The performance and safety analysis code systems as well as the preliminary safety analysis methodology developed in this study will be validated as the SMART design evolves. The performance and safety analysis technology developed during the study will be utilized for the SMART basic design development. (author)

Development of a generalized integral jet model

DEFF Research Database (Denmark)

Duijm, Nijs Jan; Kessler, A.; Markert, Frank

2017-01-01

Integral type models to describe stationary plumes and jets in cross-flows (wind) have been developed since about 1970. These models are widely used for risk analysis, to describe the consequences of many different scenarios. Alternatively, CFD codes are being applied, but computational requireme......Integral type models to describe stationary plumes and jets in cross-flows (wind) have been developed since about 1970. These models are widely used for risk analysis, to describe the consequences of many different scenarios. Alternatively, CFD codes are being applied, but computational...... requirements still limit the number of scenarios that can be dealt with using CFD only. The integral models, however, are not suited to handle transient releases, such as releases from pressurized equipment, where the initially high release rate decreases rapidly with time. Further, on gas ignition, a second...... model is needed to describe the rapid combustion of the flammable part of the plume (flash fire) and a third model has to be applied for the remaining jet fire. The objective of this paper is to describe the first steps of the development of an integral-type model describing the transient development...

Integrating discount usability in scrum development process in Ethiopia

DEFF Research Database (Denmark)

Teka, Degif; Dittrich, Y.; Kifle, Mesfin

2017-01-01

be adapted and integrated into the Scrum-agile development with especial emphasis on the Ethiopian context. The research aims at adapting software engineering and ICT development methods to the specific situation and integrating user-centered design (UCD) and lightweight usability methods into agile...... end users and developers. Culturally adapted user pair testing and heuristic evaluation supported usability testing and supported developers in getting early feedback. Integrated approach of discount usability with the Scrum process has been developed and evaluated first with the involved...

Promoting equity through integrated early child development and nutrition interventions.

Science.gov (United States)

Black, Maureen M; Dewey, Kathryn G

2014-01-01

Sustainable development, a foundation of the post-2015 global agenda, depends on healthy and productive citizens. The origins of adult health begin early in life, stemming from genetic-environmental interactions that include adequate nutrition and opportunities for responsive learning. Inequities associated with inadequate nutrition and early learning opportunities can undermine children's health and development, thereby compromising their productivity and societal contributions. Transactional theory serves as a useful framework for examining the associations that link early child development and nutrition because it emphasizes the interplay that occurs between children and the environment, mediated through caregiver interactions. Although single interventions targeting early child development or nutrition can be effective, there is limited evidence on the development, implementation, evaluation, and scaling up of integrated interventions. This manuscript introduces a special edition of papers on six topics central to integrated child development/nutrition interventions: (1) review of integrated interventions; (2) methods and topics in designing integrated interventions; (3) economic considerations related to integrated interventions; (4) capacity-building considerations; (5) examples of integrated interventions; and (6) policy implications of integrated interventions. Ensuring the health and development of infants and young children through integrated child development/nutrition interventions promotes equity, a critical component of sustainable development. © 2014 New York Academy of Sciences.

National Integration in Humanities and Development: The Way ...

African Journals Online (AJOL)

This paper examines the following concepts nation and its attributes; national integration, development and social studies education. The paper also discusses the concept of national integration, theories of nation al integration and the problems of national integration in Nigeria. It further discusses the factors of disunity and ...

Development and integration of programmatic performance indicators

International Nuclear Information System (INIS)

Modarres, M.; Wrethall, J.; Appignani, P.L.

1989-01-01

This paper describes the results of an evaluation of maintenance-related programmatic performance indicators, and summarizes the direction being taken in a new project to integrate indirect performance indicators for nuclear power plants. Programmatic indicators allow NRC to monitor, at a distance, trends in functional activities before a significant impact appears on safety. Previously presented work described the selection of candidate performance indicators associated with maintenance for continued analysis. This evaluation focused on two aspects of the selected indicators: (1) an evaluation of the state of maintenance programs in the narrative text of SALP reports versus the frequencies of inadvertent ESF actuations from test and maintenance errors; and (2) an evaluation of alternative methods for analyzing the thermal performance of plants as an integral indicator of maintenance program effectiveness. 1 ref., 1 fig

Development of Integrated Simulation System for Helical Plasmas

Energy Technology Data Exchange (ETDEWEB)

Nakamura, Y.; Yokoyama, M.; Nakajima, N.; Fukuyama, A.; Watanabe, K. Y.; Funaba, H.; Suzuki, Y.; Murakami, S.; Ida, K.; Sakakibara, S.; Yamada, H.

2005-07-01

Recent progress of computers (parallel/vector-parallel computers, PC clusters, for example) and numerical codes for helical plasmas like three-dimensional MHD equilibrium codes, combined with the development of the plasma diagnostics technique, enable us to do the detailed theoretical analyses of the individual experimental observations. Now, it is pointed out that the experimental data analysis from the viewpoints of integrated physics is an important issue to understand the confinement physics globally. In addition to that, there are international movements towards the integrated numerical simulation study. One is several proposals of integrated modeling of burning tokamak plasmas, motivated by the ITER activity. The integrated numerical simulation will be a good help to draw up new experimental plans especially for burning plasma experiments. Another movement is international collaborations on the confinement database and neoclassical transport in helical plasmas/stellarators. These backgrounds motivate us to start the development of the integrated simulation system which has a modular structure and user-friendly interfaces. The integrated simulation system, which is based on the hierarchical and multi-scale (time and space) modeling, will also be a platform for theoreticians to test their own model such as turbulent transport model. In this paper, we will show the strategy of developing the integrated simulation system and present status of the development. Especially, we discuss the modeling of the time evolution of the plasma net current profile, which is equivalent to the time evolution of the rotational transform profile, in the resistive time scale. (Author)

Trust-development in Danish and Norwegian Integration Programmes

Directory of Open Access Journals (Sweden)

Tone Larsen

2015-03-01

Full Text Available In this article the aim has been to challenge ‘integration’ as a concept and to explore integration practices in Denmark and Norway. The purpose is to analyse how trust can develop within integration practice. The article is based on a comparison between theories about inclusion/exclusion, assimilation, integration and trust/distrust, and between the Danish and Norwegian integration practices. These two countries provide an introduction programme, which has been developed as a means to integrate immigrants into the labour market and society. In accordance with these programmes language training, social studies and work practice are provided for mainly non-Western immigrants. However, the comparison between Denmark and Norway shows that the introduction programmes are both similar and different, and in this article the discussion focuses on how these two practices in many ways can be more than simply integrating.

Development of integrated platform for computational material design

Energy Technology Data Exchange (ETDEWEB)

Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato [Center for Computational Science and Engineering, Fuji Research Institute Corporation (Japan); Hideaki, Koike [Advance Soft Corporation (Japan)

2003-07-01

The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned.

Development of integrated platform for computational material design

International Nuclear Information System (INIS)

Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato; Hideaki, Koike

2003-01-01

The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned

Integrating Usability Evaluations into the Software Development Process

DEFF Research Database (Denmark)

Lizano, Fulvio

as relevant and strategic human–computer interaction (HCI) activities in the software development process, there are obstacles that limit the complete, effective and efficient integration of this kind of testing into the software development process. Two main obstacles are the cost of usability evaluations...... and the software developers' resistance to accepting users’ opinions regarding the lack of usability in their software systems. The ‘cost obstacle’ refers to the constraint of conducting usability evaluations in the software process due to the significant amount of resources required by this type of testing. Some......This thesis addresses the integration of usability evaluations into the software development process. The integration here is contextualized in terms of how to include usability evaluation as an activity in the software development lifecycle. Even though usability evaluations are considered...

Developing an integrated digitizing and display surface

Science.gov (United States)

Hipple, James D.; Wedding, Daniel K.; Wedding, Donald K., Sr.

1995-04-01

The development of an integrated digitizing and display surface, which utilizes touch entry and flat panel display (FPD) technology, is a significant hardware advance in the field of geographic information systems (GIS). Inherent qualities of the FPD, notably the ac gas plasma display, makes such a marriage inevitable. Large diagonal sizes, high resolution color, screen flatness, and monitor thickness are desirable features of an integrated digitizing and display surface. Recently, the GIS literature has addressed a need for such an innovation. The development of graphics displays based on sophisticated technologies include `photorealistic' (or high definition) imaging at resolutions of 2048 X 2048 or greater, palates of 16.7 million colors, formats greater than 30 inches diagonal, and integrated touch entry. In this paper, there is an evaluation of FPDs and data input technologies in the development of such a product.

Integration of Manufacturing and Development in Emerging Markets

DEFF Research Database (Denmark)

Søberg, Peder Veng; Wæhrens, Brian Vejrum

2014-01-01

The chapter investigates the problems related to the functional integration between manufacturing activities and research and development (R&D) activities in emerging markets within multinational companies. A framework to this end is developed and illustrated through four case studies from...... as an integral part of corporate relocation decisions....

THE ESSENCE OF STRATEGY DEVELOPMENT COMPANY IN THE INTEGRATED STRUCTURE

Directory of Open Access Journals (Sweden)

A. I. Khorev

2014-01-01

Full Text Available Summary. In the beginning of the article is defined a rational sequence of the consideration of the nature of the strategy of a company development, included into an integrated structure. Further the article describes the following items separately: "a strategy", "a development of a company", and "an integrational structure", applying them to companies included to the integrated structure; separating them from a strategy of development of an autonomous company. The article defines functions which such strategy must define, taking into consideration the nature of the strategy of the company development, included into an integrated structure. Next, the article defines six steps which describe a sequence of development of the strategy of the company development, included into an integrated structure. The analysis which is defined in the article allows determining a complete definition of essence of the strategy of the company development, included into an integrated structure. The article also defines a place of the strategy of development into the hierarchical structure of the strategies. The strategy of the company development, included into an integrated structure (as well as the strategy of development of an autonomous company -- is a competition strategy, and it separates "strategy of leadership for costs", “differentiation strategy”, and “strategy of focusing for costs”. Also authors are analyzed the strategy of the cost optimization. According to the complex definition of the strategy, and the strategy's place inside the hierarchical structure, the article defines functions which corporate, competitive, and functional strategies execute during the management of companies inside an integrational structure. The article presents characteristics of applied strategic decisions at different levels of all three types of strategies. The article's researches allow companies included to the integrated structure define their place inside the

Developing Resilient Urban Waterfronts : Integrating Adaptation into Urban Development and Management

NARCIS (Netherlands)

van Veelen, P.C.; Deppisch, Sonja

2017-01-01

There is a growing attention for integrating climate change adaptation into policies, strategies and decision-making processes (e.g. mainstreaming). This paper explores to what extent climate adaptation can be integrated into processes of urban development and change, based on case study research in

Epistemology, development, and integrity in a science education professional development program

Science.gov (United States)

Hancock, Elizabeth St. Petery

This research involved interpretive inquiry to understand changes in the notion of "self" as expressed by teachers recently enrolled as graduate students in an advanced degree program in science education at Florida State University. Teachers work in a context that integrates behavior, social structure, culture, and intention. Within this context, this study focused on the intentional realm that involves interior understandings, including self-epistemology, professional self-identity, and integrity. Scholarship in adult and teacher development, especially ways of knowing theory, guided my efforts to understand change in these notions of self. The five participants in this study were interviewed in depth to explore their "self"-related understandings in detail. The other primary data sources were portfolios and work the participants submitted as part of the program. Guided by a constructivist methodology, I used narrative inquiry and grounded theory to conduct data analysis. As learners and teachers, these individuals drew upon epistemological orientations emphasizing a procedural orientation to knowledge. They experienced varying degrees of interior and exterior development in self and epistemology. They created integrity in their efforts to align their intentions with their actions with a dynamic relationship to context. This study suggests that professional development experiences in science education include consideration of the personal and the professional, recognize and honor differing perspectives, facilitate development, and assist individuals to recognize and articulate their integrity.

DyNAMiC Workbench: an integrated development environment for dynamic DNA nanotechnology.

Science.gov (United States)

Grun, Casey; Werfel, Justin; Zhang, David Yu; Yin, Peng

2015-10-06

Dynamic DNA nanotechnology provides a promising avenue for implementing sophisticated assembly processes, mechanical behaviours, sensing and computation at the nanoscale. However, design of these systems is complex and error-prone, because the need to control the kinetic pathway of a system greatly increases the number of design constraints and possible failure modes for the system. Previous tools have automated some parts of the design workflow, but an integrated solution is lacking. Here, we present software implementing a three 'tier' design process: a high-level visual programming language is used to describe systems, a molecular compiler builds a DNA implementation and nucleotide sequences are generated and optimized. Additionally, our software includes tools for analysing and 'debugging' the designs in silico, and for importing/exporting designs to other commonly used software systems. The software we present is built on many existing pieces of software, but is integrated into a single package—accessible using a Web-based interface at http://molecular-systems.net/workbench. We hope that the deep integration between tools and the flexibility of this design process will lead to better experimental results, fewer experimental design iterations and the development of more complex DNA nanosystems. © 2015 The Authors.

Developing and implementing core competencies for integrative medicine fellowships.

Science.gov (United States)

Ring, Melinda; Brodsky, Marc; Low Dog, Tieraona; Sierpina, Victor; Bailey, Michelle; Locke, Amy; Kogan, Mikhail; Rindfleisch, James A; Saper, Robert

2014-03-01

The Consortium of Academic Health Centers for Integrative Medicine defines integrative medicine as "the practice of medicine that reaffirms the importance of the relationship between practitioner and patient, focuses on the whole person, is informed by evidence, and makes use of all appropriate therapeutic approaches, health care professionals, and disciplines to achieve optimal health and healing." Over the past three decades, the U.S. public increasingly has sought integrative medicine approaches. In an effort to train medical professionals to adequately counsel patients on the safe and appropriate use of these approaches, medical schools and residencies have developed curricula on integrative medicine for their trainees. In addition, integrative medicine clinical fellowships for postresidency physicians have emerged to provide training for practitioners interested in gaining greater expertise in this emerging field. Currently, 13 clinical fellowships in integrative medicine exist in the United States, and they are predominantly connected to academic medical centers or teaching affiliate hospitals. In 2010, the Consortium of Academic Health Centers for Integrative Medicine, represented by 56 member academic health care institutions with a shared commitment to advance the principles and practices of integrative medicine, convened a two-year task force to draft integrative medicine fellowship core competencies. These competencies would guide fellowship curriculum development and ensure that graduates possessed a common body of knowledge, skills, and attitudes. In this article, the authors discuss the competencies and the task force's process to develop them, as well as associated teaching and assessment methods, faculty development, potential barriers, and future directions.

INTEGRATED HSEQ MANAGEMENT SYSTEMS: DEVELOPMENTS AND TRENDS

OpenAIRE

Osmo Kauppila; Janne Härkönen; Seppo Väyrynen

2015-01-01

The integration of health and safety, environmental and quality (HSEQ) management systems has become a current topic in the 21st century, as the need for systems thinking has grown along with the number of management system standards. This study aims to map current developments and trends in integrated HSEQ management. Three viewpoints are taken: the current state of the main HSEQ management standards, research literature on integrated management systems (IMS), and a case study of an industry...

Regional Integration, Trade and Private Sector Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Regional Integration, Trade and Private Sector Development Program (Namibia) ... (NEPRU's other clients include regional and private sector institutions.) ... New Dutch-Canadian funding for the Climate and Development Knowledge Network.

Development of an integrated condition monitoring system for meeting license renewal criteria

International Nuclear Information System (INIS)

Jarrell, D.B.; Stratton, R.C.

1991-01-01

A project for developing a methodology that facilitates an artificial intelligence (AI) approach to the integration of component condition monitoring, fault diagnostics, and component failure root cause analysis is in progress at PNL. Using model-based reasoning with an object oriented schematic representation, these combined elements provide a real-time interactive means to systematically investigate, understand and auto-document the mitigation of age-related component degradation. A common Data Acquisition System contains component parameter and machinery history data as well as a knowledge of the plant system configuration. The unique aspect of this system is that it integrates this component parametric, diagnostic, and failure history knowledge to determine a more complete computerized specification of the component condition than was previously possible. This condition specification is then compared to degradation process models for behavioral similitude, thereby identifying the active degradation mechanism. Based on the monitored trends and the degradation model, an accurate estimate of projected equipment service life can then be projected. (author)

Mentoring to develop research selfefficacy, with particular reference to previously disadvantaged individuals

OpenAIRE

S. Schulze

2010-01-01

The development of inexperienced researchers is crucial. In response to the lack of research self-efficacy of many previously disadvantaged individuals, the article examines how mentoring can enhance the research self-efficacy of mentees. The study is grounded in the self-efficacy theory (SET) – an aspect of the social cognitive theory (SCT). Insights were gained from an in-depth study of SCT, SET and mentoring, and from a completed mentoring project. This led to the formulation of three basi...

The mechanism of development of integration processes in the region

Directory of Open Access Journals (Sweden)

V. M. Bautin

2017-01-01

Full Text Available In the context of the weakening economic development of the region, it is necessary to find new ways to increase the efficiency of interaction between the economic structures of the region. One of the areas is the development of integration processes in the field of cooperation between the public and private capital to meet the goals and objectives of the effective functioning of both the participants of integration interaction, as well as the region as a whole. Factors that influence the emergence and development of integration processes, are a scarce resource; motivated by the need to diversify the business; the desire to improve the economic efficiency of business entities. Development grace-integral process is economic interaction managing subjects, followed by combining them to achieve common objectives and obtain the synergistic effect due to a number of resource solutions, organizational and administrative problems. To obtain high economic benefits of integration interaction of the participants, we have proposed a mechanism for the development of integration processes in the region, based on three levels of interaction between regional authorities, educational institutions and private organizations. It allows forming a single chain integration and process management to increase the effectiveness of their implementation in practice, and to avoid the disadvantages associated with the formation of the integrated structures. Integration cooperation of regional authorities with organizations of various spheres of activity of the region and education (research organizations is a key component of the new Russian innovation policy because, if done right, it provides broader benefits from investments in research and development, creating favorable conditions for sustainable innovation development and is a strategic factor in the economic growth of the region.

Control and Diagnosis in Integrated Product Development - Observations during the Development of an AGV

Science.gov (United States)

Stetter, R.; Simundsson, A.

2015-11-01

This paper is concerned with the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of integrated product development have attracted significant attention during the last decades. Today, it is generally observed that product development processes of complex systems can only be successful if the activities in the different domains are well connected and synchronised and if an ongoing communication is present - an ongoing communication spanning the technical domains and also including functions such as production planning, marketing/distribution, quality assurance, service and project planning. Obviously, numerous approaches to tackle this challenge are present in scientific literature and in industrial practice, as well. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The main source of insight of the presented research is the product development process of an Automated Guided Vehicle (AGV) which is intended to be used on rough terrain. The paper starts with a background describing Integrated Product Development. The second section deals with the product development of the sample product. The third part summarizes some insights and formulates first hypotheses concerning control and diagnosis in Integrated Product Development.

An Integrative Theory of Numerical Development

Science.gov (United States)

Siegler, Robert; Lortie-Forgues, Hugues

2014-01-01

Understanding of numerical development is growing rapidly, but the volume and diversity of findings can make it difficult to perceive any coherence in the process. The integrative theory of numerical development posits that a coherent theme is present, however--progressive broadening of the set of numbers whose magnitudes can be accurately…

Development and integration of programmatic performance indicators

International Nuclear Information System (INIS)

Wreathall, J.; Appignani, P.; Modarres, M.

1990-01-01

Work is currently being performed to develop and integrate programmatic performance indicators, that is, indicators of performance associated with the influence on safety associated with plant functional areas like maintenance, operations and training. The process for identifying and evaluating indicators associated with maintenance and training has been described earlier. Since that time, the authors have evaluated the maintenance indicators: inadvertent engineered safety feature actuations due to test and maintenance errors, and daily power loss (DPL), which seemingly show relationships to safety. Work on training process will lead to characteristic sorts of behavior. In the integration study, several frameworks have been developed to provide a basis for describing the interrelationships of plant behavior, personnel behavior, and safety. These will be applied in the next phase of the work to perform the nominal integration

Integrating Sustainable Development into Operations Management Courses

Science.gov (United States)

Fredriksson, Peter; Persson, Magnus

2011-01-01

Purpose: It is widely acknowledged that aspects of sustainable development (SD) should be integrated into higher level operations management (OM) education. The aim of the paper is to outline the experiences gained at Chalmers University of Technology in Sweden from integrating aspects of SD into OM courses. Design/methodology/approach: The paper…

Development of remote control integrator system on Tokamak

International Nuclear Information System (INIS)

Wu Yichun; Wang Lingzhi; Shu Shuangbao

2014-01-01

In order to meet with the requirement of electromagnetic diagnosis to the J-TEXT Tokamak, a remote control integrator system was developed. With modular design method, the integrator system is composed of the integrator cards, a control card, a linear power card and the BNC interface cards, and it uses the PC control soft- ware to conduct network control. An integrator system provides 32 integrator channels, and all integral channels have four kinds of integral time constants for remote selection and provide three kinds of integrator running control methods. According to laboratory and J-TEXT field testing, it shows that the output voltage range is -10-10 V, output noise is not more than 5 mV, and for the four kinds of integral time constants, the integral output drifts are all less than 5 mV within 100 s for each integrator channel. (authors)

Building Integrated Design Practice under the Concept of Sustainable Development

Science.gov (United States)

Liu, Xuexin

2018-03-01

With the continuous development of social economy, people are more demanding for architecture. Some advanced design concepts are gradually applied to the design of buildings. Under the concept of sustainable development, building integration design has also been widely used to promote the rapid development of architectural design. Integrated design concepts and sustainable development concepts play an important role to meet people’s requirements. This article will explore the concept of sustainable development under the concept of integrated architectural design and practice analysis, propose appropriate measures.

Development of our laser fusion integration simulation

International Nuclear Information System (INIS)

Li, J.; Zhai, C.; Li, S.; Li, X.; Zheng, W.; Yong, H.; Zeng, Q.; Hang, X.; Qi, J.; Yang, R.; Cheng, J.; Song, P.; Gu, P.; Zhang, A.; An, H.; Xu, X.; Guo, H.; Cao, X.; Mo, Z.; Pei, W.; Jiang, S.; Zhu, S. P.

2013-01-01

In the target design of the Inertial Confinement Fusion (ICF) program, it is common practice to apply radiation hydrodynamics code to study the key physical processes happening in ICF process, such as hohlraum physics, radiation drive symmetry, capsule implosion physics in the radiation-drive approach of ICF. Recently, many efforts have been done to develop our 2D integrated simulation capability of laser fusion with a variety of optional physical models and numerical methods. In order to effectively integrate the existing codes and to facilitate the development of new codes, we are developing an object-oriented structured-mesh parallel code-supporting infrastructure, called JASMIN. Based on two-dimensional three-temperature hohlraum physics code LARED-H and two-dimensional multi-group radiative transfer code LARED-R, we develop a new generation two-dimensional laser fusion code under the JASMIN infrastructure, which enable us to simulate the whole process of laser fusion from the laser beams' entrance into the hohlraum to the end of implosion. In this paper, we will give a brief description of our new-generation two-dimensional laser fusion code, named LARED-Integration, especially in its physical models, and present some simulation results of holhraum. (authors)

Integration of Millennium Development Goals into Physical ...

African Journals Online (AJOL)

Integration of Millennium Development Goals into Physical Education programme: ... African Journal for Physical Activity and Health Sciences ... the UN in terms of sustainable human development and how graduates of physical education and ...

Development of mechanical design technology for integral reactor

Energy Technology Data Exchange (ETDEWEB)

Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn

1999-03-01

While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose application such as small capacity power generation, co-generation and sea water desalination. With this in mind, an integral reactor SMART is under development. Design concepts, system layout and types of equipment of integral reactor are significantly different from those of loop type reactor. Conceptual design development of mechanical structures of integral reactor SMART is completed through the first stage of the project. Efforts were endeavored for the establishment of design basis and evaluation of applicable codes and standards. Design and functional requirements of major structural components were setup, and three dimensional structural modelling of SMART reactor vessel assembly was prepared. Also, maintenance and repair scheme as well as preliminary fabricability evaluation were carried out. Since small integral reactor technology includes sensitive technologies and know-how's, it is hard to achieve systematic and comprehensive technology transfer from nuclear-advanced countries. Thus, it is necessary to develop the related design technology and to verify the adopted methodologies through test and experiments in order to assure the structural integrity of reactor system. (author)

Development of mechanical design technology for integral reactor

International Nuclear Information System (INIS)

Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn

1999-03-01

While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose application such as small capacity power generation, co-generation and sea water desalination. With this in mind, an integral reactor SMART is under development. Design concepts, system layout and types of equipment of integral reactor are significantly different from those of loop type reactor. Conceptual design development of mechanical structures of integral reactor SMART is completed through the first stage of the project. Efforts were endeavored for the establishment of design basis and evaluation of applicable codes and standards. Design and functional requirements of major structural components were set up, and three dimensional structural modelling of SMART reactor vessel assembly was prepared. Also, maintenance and repair scheme as well as preliminary fabricability evaluation were carried out. Since small integral reactor technology includes sensitive technologies and know-how's, it is hard to achieve systematic and comprehensive technology transfer from nuclear-advanced countries. Thus, it is necessary to develop the related design technology and to verify the adopted methodologies through test and experiments in order to assure the structural integrity of reactor system. (author)

Data Integration and Analysis System (DIAS) Contributing to the Sustainable Development Goals (SDGs)

Science.gov (United States)

Koike, T.

2014-12-01

It has been said that scientists and experts usually use 80% of their research time for data management (DOE, 2002). Only 20% of research time is used for purely scientific activities. This ratio should be reversed by introducing computer science technology. To realize this goal, the Japanese government supported the development of a data system called "Data Integration and Analysis System (DIAS)," as one of the national key projects promoted by the Council for Science and Technology Policy (CSTP) from 2006 to 2010. A follow-up 5-year project is also ongoing. The essential aim for the DIAS was to create knowledge that would enable solutions to problems and generate socioeconomic benefits. DIAS mainly consists of four data components including data injection, management, integration, and interoperability. DIAS is now tackling a large increase in the diversity and volume of data from observing the Earth. Dictionaries have been developing an ontology system for technical and geographical terms, and a metadata design has been completed according to international standards. The volume of data stored has exponentially increased. Previously, almost all of the large-volume data came from satellites, but model outputs occupy the largest volume of our data storage nowadays. In collaboration with scientific and technological groups, DIAS can accelerate data archiving by including data loading, quality checking, metadata registration, and our system data-searching capability is being enriched. DIAS also enables us to perform integrated research and realize interdisciplinarity. Essentially, we are now working in the fields of climate, water resources, food, fisheries, and biodiversity by collaborating between different disciplines and trying to develop bases of contribution to Sustainable Development Goals (SDGs).

Mechanical systems development of integral reactor

International Nuclear Information System (INIS)

Park, Keun Bae; Chang, M. H.; Kim, J. I.; Choi, S.; Kim, K. S.; Kim, T. W.; Jeong, K. H.; Kim, J. H.; Kim, Y. W.; Lee, G. M.

1997-07-01

While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose applications such as small capacity power generation, co-generation and sea water desalination. This in mind, survey has been made on the worldwide small and medium integral reactors under development. Reviewed are their technical characteristics, development status, design features, application plans, etc. For the mechanical design scope of work, the structural concept compatible with the characteristics and requirements of integral reactor has been established. Types of major components were evaluated and selected. Functional and structural concept, equipment layout and supporting concept within the reactor pressure vessel have also been established. Preliminary mechanical design requirements were developed considering the reactor lifetime, operation conditions, and the expected loading combinations. To embody the concurrent design approach, recent CAD technology and team engineering concept were evaluated. (author). 31 refs.,16 tabs., 35 figs

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

International Nuclear Information System (INIS)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

2004-02-01

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

2004-02-15

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

Development of an integrated database management system to evaluate integrity of flawed components of nuclear power plant

International Nuclear Information System (INIS)

Mun, H. L.; Choi, S. N.; Jang, K. S.; Hong, S. Y.; Choi, J. B.; Kim, Y. J.

2001-01-01

The object of this paper is to develop an NPP-IDBMS(Integrated DataBase Management System for Nuclear Power Plants) for evaluating the integrity of components of nuclear power plant using relational data model. This paper describes the relational data model, structure and development strategy for the proposed NPP-IDBMS. The NPP-IDBMS consists of database, database management system and interface part. The database part consists of plant, shape, operating condition, material properties and stress database, which are required for the integrity evaluation of each component in nuclear power plants. For the development of stress database, an extensive finite element analysis was performed for various components considering operational transients. The developed NPP-IDBMS will provide efficient and accurate way to evaluate the integrity of flawed components

Development of a preprototype thermoelectric integrated membrane evaporation subsystem for water recovery

Science.gov (United States)

Winkler, H. E.; Roebelen, G. J., Jr.

1980-01-01

A three-man urine water recovery preprototype subsystem using a new concept to provide efficient potable water recovery from waste fluids on extended duration space flights has been designed, fabricated, and tested. Low power, compactness, and gravity insensitive operation are featured in this vacuum distillation subsystem that combines a hollow fiber polysulfone membrane evaporator with a thermoelectric heat pump. Application and integration of these key elements have solved problems inherent in previous reclamation subsystem designs. The hollow fiber elements provide positive liquid/gas phase control with no moving parts other than a waste liquid recirculation pump and a product water withdrawal pump. Tubular membranes provide structural integrity, improving on previous flat sheet membrane designs. A thermoelectric heat pump provides latent energy recovery.

Toward a Comprehensive Framework for Evaluating the Core Integration Features of Enterprise Integration Middleware Technologies

Directory of Open Access Journals (Sweden)

Hossein Moradi

2013-01-01

Full Text Available To achieve greater automation of their business processes, organizations face the challenge of integrating disparate systems. In attempting to overcome this problem, organizations are turning to different kinds of enterprise integration. Implementing enterprise integration is a complex task involving both technological and business challenges and requires appropriate middleware technologies. Different enterprise integration solutions provide various functions and features which lead to the complexity of their evaluation process. To overcome this complexity, appropriate tools for evaluating the core integration features of enterprise integration solutions is required. This paper proposes a new comprehensive framework for evaluating the core integration features of both intra-enterprise and inter-enterprise Integration's enabling technologies, which simplify the process of evaluating the requirements met by enterprise integration middleware technologies.The proposed framework for evaluating the core integration features of enterprise integration middleware technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various enterprise integration middleware technologies are categorized in different classifications and are evaluated based on their supporting level for the core integration features' criteria. These criteria include the functional and supporting features. The proposed framework, which is a revised version of our previous framework in this area, has developed the scope, structure and content of the mentioned framework.

Developing Boiler Concepts as Integrated Units

DEFF Research Database (Denmark)

Sørensen, Kim; Condra, Thomas Joseph; Houbak, Niels

2004-01-01

- consisting of pressure part, burner and control system. The Technical University of Denmark, MEK - Energy Engineering Section [12] has participated in the modelling process. The project has included static and dynamic modelling of the boiler concept. For optimization of operation, verication of performance......With the objective to be able to optimize the design and operation of steam boiler concepts Aalborg Industries A/S [1] has together with Aalborg University, Institute of Energy Technology [9] carried out a development project paying special attention to the boiler concept as an integrated unit......, emissions and to obtain long time operation experiences with the boiler concept, a full scale prototype has been built and these tests have been accomplished on the prototype. By applying this integrated unit approach to the boiler concept development it has been possible to optimize the different building...

Calcium as a signal integrator in developing epithelial tissues.

Science.gov (United States)

Brodskiy, Pavel A; Zartman, Jeremiah J

2018-05-16

Decoding how tissue properties emerge across multiple spatial and temporal scales from the integration of local signals is a grand challenge in quantitative biology. For example, the collective behavior of epithelial cells is critical for shaping developing embryos. Understanding how epithelial cells interpret a diverse range of local signals to coordinate tissue-level processes requires a systems-level understanding of development. Integration of multiple signaling pathways that specify cell signaling information requires second messengers such as calcium ions. Increasingly, specific roles have been uncovered for calcium signaling throughout development. Calcium signaling regulates many processes including division, migration, death, and differentiation. However, the pleiotropic and ubiquitous nature of calcium signaling implies that many additional functions remain to be discovered. Here we review a selection of recent studies to highlight important insights into how multiple signals are transduced by calcium transients in developing epithelial tissues. Quantitative imaging and computational modeling have provided important insights into how calcium signaling integration occurs. Reverse-engineering the conserved features of signal integration mediated by calcium signaling will enable novel approaches in regenerative medicine and synthetic control of morphogenesis.

Interdisciplinary Integrated Engineering Development Course in HITACHI

Science.gov (United States)

Ojima, Masahiro

As an example of interdisciplinary education for engineers in private companies, IED (Integrated Engineering Development) course at HITACHI Ltd. is presented. To help 30 years old or so promising engineers create a new product based on a new technology, one year term course is designed for four types of engineers; mechanical, electric & electronic, information software, and digital systems. Each course has core basic technologies plus related supplementary subjects to promote an interdisciplinary integrated engineer. Not only lectures given by university professors but heavy duty home work is also given by senior engineers of HITACHI to make them apply basic theory to practical problems. Furthermore, self development planning, leadership development program and technology-marketing project are introduced to promote human skills and business sense needed for technology leaders in company.

Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes

Science.gov (United States)

Pai, Shantaram S.; Nagpal, Vinod K.

2007-01-01

An effort has been initiated to integrate manufacturing process simulations with probabilistic structural analyses in order to capture the important impacts of manufacturing uncertainties on component stress levels and life. Two physics-based manufacturing process models (one for powdered metal forging and the other for annular deformation resistance welding) have been linked to the NESSUS structural analysis code. This paper describes the methodology developed to perform this integration including several examples. Although this effort is still underway, particularly for full integration of a probabilistic analysis, the progress to date has been encouraging and a software interface that implements the methodology has been developed. The purpose of this paper is to report this preliminary development.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Appendices; Volume 2

Science.gov (United States)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g. missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

Review of Exploration Systems Development (ESD) Integrated Hazard Development Process. Volume 1; Appendices

Science.gov (United States)

Smiles, Michael D.; Blythe, Michael P.; Bejmuk, Bohdan; Currie, Nancy J.; Doremus, Robert C.; Franzo, Jennifer C.; Gordon, Mark W.; Johnson, Tracy D.; Kowaleski, Mark M.; Laube, Jeffrey R.

2015-01-01

The Chief Engineer of the Exploration Systems Development (ESD) Office requested that the NASA Engineering and Safety Center (NESC) perform an independent assessment of the ESD's integrated hazard development process. The focus of the assessment was to review the integrated hazard analysis (IHA) process and identify any gaps/improvements in the process (e.g., missed causes, cause tree completeness, missed hazards). This document contains the outcome of the NESC assessment.

Development of an integrated control and measurement system

International Nuclear Information System (INIS)

Manges, W.W.

1984-03-01

This thesis presents a tutorial on the issues involved in the development of a minicomputer-based, distributed intelligence data acquisition and process control system to support complex experimental facilities. The particular system discussed in this thesis is under development for the Atomic Vapor Laser Isotope Separation (AVLIS) Program at the Oak Ridge Gaseous Diffusion Plant (ORGDP). In the AVLIS program, we were careful to integrate the computer sections of the implementation into the instrumentation system rather than adding them as an appendage. We then addressed the reliability and availability of the system as a separate concern. Thus, our concept of an integrated control and measurement (ICAM) system forms the basis for this thesis. This thesis details the logic and philosophy that went into the development of this system and explains why the commercially available turn-key systems generally are not suitable. Also, the issues involved in the specification of the components for such an integrated system are emphasized

INNOVATION DEVELOPMENT MANAGEMENT IN VERTICALLY INTEGRATED HOLDING COMPANY

Directory of Open Access Journals (Sweden)

Natalya T. Uspenskaja

2015-01-01

Full Text Available The trend towards production consolidation and integration processes taking place both in the Russian and global economies leads to development of business associations, with a holding company being the most common form inRussiaand around the globe. The evidence in favor of the formation of holding companies is that they can benefit from the scale (bulk purchasing, centralized stuff training; in the global capital and exports markets they can be more effective than smaller businesses and, if non-profitable, a loss-making structure is easier to liquidate than the entire company; holding companies and associations can be an effective defender from political interference. As the importance of the well-functioning and harmonized procedure for the companies’ integration will increase (especially in the context of Russian business, where specific features of many areas of the production system imply the use of holding oligopolies as the most effective form of market structures, there is a need in their more profound study and, in particular, in the analysis of the most important technologies of the general integration procedure. The article outlines the relevance of innovative development management of vertically integrated holding systems, lists principles of innovative activity management and considers the features of innovation management of a vertically integrated holding company. The objective of the research is to study theoretical and practical aspects of innovative development management in vertically integrated holding systems. The object of research is management structures in innovative holding companies. While working on the article, the following methods of economic research were used: abstract and logical method, empirical method, method of expert evaluations, as well as methods of structural and functional and statistical analysis. 

Conditions and strategies for integrating ergonomics into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

Ergonomics considerations at the stage of product development in industry is a major strategy for prevention of work-related injuries and illnesses among employees at the time of manufacture of new products. This study elucidates some important conditions and possibilities for integrating...... such considerations during the product development process. Special attention is paid to the role of design and production engineers. Based on different understandings of the product development process four approaches to integration of ergonomics are outlined....

The moral development of the child: an integrated model.

Science.gov (United States)

Ma, Hing Keung

2013-01-01

Previous theories of moral development such as those by Piaget and Kohlberg usually focused on the cognitive or rational aspect, and seldom included the affective aspect in their construction. The characteristics of the stages of moral development in the present paper are elaborated with special reference to psychological needs, altruism and human relationships, and justice reasoning. The three stages are: (1) Physical Survival, Selfishness, and Obedience, (2) Love Needs, Reciprocal Altruism, and Instrumental Purpose; and (3) Belongingness Needs, Primary Group Altruism, and Mutual Interpersonal Expectations. At Stage 1, a deep and profound attachment to parents, empathy toward the significant others, and obedience to authorities all contribute to the physical survival of a person at this stage. People at Stage 2 are self-protective, dominant, exploitative, and opportunistic. The need to love and to be loved is gratified on the basis of reciprocal altruism. People at Stage 3 have a strong desire to gratify their belongingness needs to a primary group. They are willing to sacrifice for the benefits of the group at great cost. While the psychological needs and altruism are related to the affective aspect of moral development, the justice reasoning is related to the cognitive aspect. The proposed theoretical model attempts to integrate the affective and cognitive aspects of moral development, and prototypic responses to questions related to hypothetical moral dilemmas are presented to substantiate the proposed stage structures. It is hypothesized that the sequence of these three stages is invariant of person and culture.

Basic Study of Establishment of Quality Assurance Processes to Develop an Integrated Quality Assurance System for Nuclear Power Plant Construction

International Nuclear Information System (INIS)

Lim, Byungki; Moon, Byeongsuk; Lee, Jae Kyoung

2014-01-01

An integrated quality assurance system has necessitated carrying out quality assurance programs in a systematic manner because the opportunities to expand business in overseas markets have increased since the export of a nuclear power plant to UAE in 2009. In this study, we use PDCA method to systematically analyze the quality assurance procedures that were used in previous projects for constructing nuclear power plants. We reached a classification system of quality assurance processes at each phase of nuclear power plant construction by integrating similar work related to quality such as planning, design, equipment manufacturing, construction and start-up. We also established a hierarchy of quality assurance processes to develop an integrated quality assurance system as a technology goal to be developed later. To obtain most updated quality assurance activities, a quality assurance process is structured by integrating similar works analyzed from quality assurance procedures through PDCA cycle method. At the implementation phase of Hierarchy of quality processes and sequence of processes for constructing nuclear power plant are established in this study. Integrated quality assurance system is to be developed by connecting organizations as well as stakeholders such as owners, Architect engineering, suppliers, contractors, and sub-contractors to carry out assigned work efficiently

Basic Study of Establishment of Quality Assurance Processes to Develop an Integrated Quality Assurance System for Nuclear Power Plant Construction

Energy Technology Data Exchange (ETDEWEB)

Lim, Byungki; Moon, Byeongsuk; Lee, Jae Kyoung [Korea Hydro and Nuclear Power Co. Ltd., Daejeon (Korea, Republic of)

2014-05-15

An integrated quality assurance system has necessitated carrying out quality assurance programs in a systematic manner because the opportunities to expand business in overseas markets have increased since the export of a nuclear power plant to UAE in 2009. In this study, we use PDCA method to systematically analyze the quality assurance procedures that were used in previous projects for constructing nuclear power plants. We reached a classification system of quality assurance processes at each phase of nuclear power plant construction by integrating similar work related to quality such as planning, design, equipment manufacturing, construction and start-up. We also established a hierarchy of quality assurance processes to develop an integrated quality assurance system as a technology goal to be developed later. To obtain most updated quality assurance activities, a quality assurance process is structured by integrating similar works analyzed from quality assurance procedures through PDCA cycle method. At the implementation phase of Hierarchy of quality processes and sequence of processes for constructing nuclear power plant are established in this study. Integrated quality assurance system is to be developed by connecting organizations as well as stakeholders such as owners, Architect engineering, suppliers, contractors, and sub-contractors to carry out assigned work efficiently.

Gsflow-py: An integrated hydrologic model development tool

Science.gov (United States)

Gardner, M.; Niswonger, R. G.; Morton, C.; Henson, W.; Huntington, J. L.

2017-12-01

Integrated hydrologic modeling encompasses a vast number of processes and specifications, variable in time and space, and development of model datasets can be arduous. Model input construction techniques have not been formalized or made easily reproducible. Creating the input files for integrated hydrologic models (IHM) requires complex GIS processing of raster and vector datasets from various sources. Developing stream network topology that is consistent with the model resolution digital elevation model is important for robust simulation of surface water and groundwater exchanges. Distribution of meteorologic parameters over the model domain is difficult in complex terrain at the model resolution scale, but is necessary to drive realistic simulations. Historically, development of input data for IHM models has required extensive GIS and computer programming expertise which has restricted the use of IHMs to research groups with available financial, human, and technical resources. Here we present a series of Python scripts that provide a formalized technique for the parameterization and development of integrated hydrologic model inputs for GSFLOW. With some modifications, this process could be applied to any regular grid hydrologic model. This Python toolkit automates many of the necessary and laborious processes of parameterization, including stream network development and cascade routing, land coverages, and meteorological distribution over the model domain.

Office of Technology Development integrated program for development of in situ remediation technologies

International Nuclear Information System (INIS)

Peterson, M.

1992-08-01

The Department of Energy's Office of Technology Development has instituted an integrated program focused on development of in situ remediation technologies. The development of in situ remediation technologies will focus on five problem groups: buried waste, contaminated soils, contaminated groundwater, containerized wastes and underground detonation sites. The contaminants that will be included in the development program are volatile and non volatile organics, radionuclides, inorganics and highly explosive materials as well as mixtures of these contaminants. The In Situ Remediation Integrated Program (ISR IP) has defined the fiscal year 1993 research and development technology areas for focusing activities, and they are described in this paper. These R ampersand D topical areas include: nonbiological in situ treatment, in situ bioremediation, electrokinetics, and in situ containment

Integrating care for people with depression: developments in the Netherlands

NARCIS (Netherlands)

Peters, Adri H.; Leeuw, Rob J. de; Schrijvers, Guus J.P.

2010-01-01

Introduction: In this article we describe the history and present state of integrated care for people with depression in the Netherlands. The central question is: what are the developments in integrated care for people with depression in the Netherlands?Methods: We describe these developments from

Integrated durability process in product development

International Nuclear Information System (INIS)

Pompetzki, M.; Saadetian, H.

2002-01-01

This presentation describes the integrated durability process in product development. Each of the major components of the integrated process are described along with a number of examples of how integrated durability assessment has been used in the ground vehicle industry. The durability process starts with the acquisition of loading information, either physically through loads measurement or virtually through multibody dynamics. The loading information is then processed and characterized for further analysis. Durability assessment was historically test based and completed through field or laboratory evaluation. Today, it is common that both the test and CAE environments are used together in durability assessment. Test based durability assessment is used for final design sign-off but is also critically important for correlating CAE models, in order to investigate design alternatives. There is also a major initiative today to integrate the individual components into a process, by linking applications and providing a framework to communicate information as well as manage all the data involved in the entire process. Although a single process is presented, the details of the process can vary significantly for different products and applications. Recent applications that highlight different parts of the durability process are given. As well as an example of how integration of software tools between different disciplines (MBD, FE and fatigue) not only simplifies the process, but also significantly improves it. (author)

Integrated ecosystem assessment for western development of China

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

The objectives of Integrated Ecosystem Assessment for Western Development of China includes: (1) providing scientific basis for ecosystem protection, ecosystem management and ecological construction in the western development; (2) developing complete database and analytical tools and strengthening decision-making support capacity; and (3) improving ecosystem management in China, spreading ecological knowledge to the public, serving decision-making of local and central governments, and promoting socio-economic sustainable development. The design and implementation of the project are of significance under the macro background of western development of China. By the integrated assessment of western China, we can get the first-hand data covering all the environmental factors as well as disclose the situations and their changing trends of ecosystem in the western part of China, which will benefit the decision-making for the central and local governments in the implementation of the western development strategy. In other words, the implementation of the project, to a certain extent, can guarantee the regional sustainable development of western China.

Integrated Micro Product and Technology Development

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

Performance Criteria of Spatial Development Projects Based on Interregional Integration

Directory of Open Access Journals (Sweden)

Elena Viktorovna Kurushina

2018-03-01

Full Text Available The search of efficient ways for the development of regional socio-economic space is a relevant problem. The authors consider the models of spatial organization according to the Spatial Development Strategy of the Russian Federation until 2030. We conduct the comparative analysis of scenarios for the polarized and diversified spatial growth. Many investigations consider the concepts of polarized and endogenous growth. This study proposes a methodology to assess the development of macroregions and to increase the viability of interregional integration projects. To develop this methodology, we formulate scientific principles and indirect criteria of the project performance conforming to the theory of regional integration. In addition to the territorial community and complementarity of the development potentials, regional integration in the country should be based on the principles of security, networking, limited quantity and awareness of the potential project participants. Integration should ensure synergetic effects and take into account cultural and historical closeness, that manifests in the common mentality and existing economic relations among regions. The calculation results regarding the indirect criteria are obtained using the methods of classification and spatial correlation. This study confirms the hypothesis, that the formation of the Western Siberian and Ural macro-regions is appropriate. We have concluded this on the basis of the criteria of economic development, economic integration, the similarity of regional spaces as habitats, and a number of participants for the subjects of the Ural Federal District. The projection of the patterns of international economic integration to the interregional level allows predicting the highest probability for the successful cooperation among the Western Siberian regions with a high level of economic development. The authors’ method has revealed a high synchronization between the economies of

Integrating developing country manufacturing industries into global supply chain

Directory of Open Access Journals (Sweden)

Fasika Bete Georgise

2014-01-01

Full Text Available Purpose: Due to globalization of manufacturing activities, the arena of competition and competitiveness advantage is moving from firms towards supply chains and networks. With the recent advancement of information and communication technologies this participation are becoming as common business practice in developed countries firms. Companies were more integrated into the world market for the global nature of the sourcing, manufacturing and distribution. These changes create both challenges and opportunities for the manufacturing industries in developing countries. The objective of this paper is to examine the level of inter-organizational and intra-organizational supply chain integration practices in developing country, Ethiopia.Design/methodology/approach: An industrial questionnaires survey was used to collect the current practices of the manufacturing industries in Ethiopia as an example of the developing countries. Descriptive statistics is primarily used for the analysis.Findings: Results show a low level of supply chain relationship both in intra and inter organizational supply chain integration level among members. Accordingly, such issues require much attention to facilitate a greater integration within the supply chains in the Ethiopian manufacturing industries.Research limitations/implications: The paper focuses on examining the practices of Ethiopian manufacturing industries empirical data. The interpretation of results should be taken with prudence.Originality/Value: The manufacturing industry in developing countries (MIDC has been a part of the global supply chains for long time as a supplier of raw material and manufacturer of primary products. Currently, the MIDC is trying to access the different markets segment of the world even with new products starting from their local market to the complex and dynamic international market. Nevertheless, their supply chains are inefficient and hence, their competitiveness level far from the

Integrated Instrumentation for Light-Emitting Polymers Development

National Research Council Canada - National Science Library

Jen, Alex

2000-01-01

The major objective of this project is to develop an integrated instrumentation that combines the capability of performing spin coating of uniform polymer thin films under an oxygen and moisture free...

Development and Testing of an Integrated Sandia Cooler Thermoelectric Device (SCTD).

Energy Technology Data Exchange (ETDEWEB)

Johnson, Terry A.; Staats, Wayne Lawrence,; Leick, Michael Thomas; Zimmerman, Mark D.; Radermacher, Reinhard; Martin, Cara; Nasuta, Dennis; Kalinowski, Paul; Hoffman, William

2014-12-01

This report describes a FY14 effort to develop an integrated Sandia Cooler T hermoelectric D evice (SCTD) . The project included a review of feasible thermoelectric (TE) cooling applications, baseline performance testing of an existing TE device, analysis and design development of an integrated SCTD assembly, and performance measurement and validation of the integrated SCTD prototype.

Physics Research Integrated Development Environment (PRIDE)

International Nuclear Information System (INIS)

Burton, J.; Cormell, L.

1993-12-01

Past efforts to implement a Software Engineering approach to High Energy Physics computing have been met with significant resistance and have been, in many cases, only marginally successful. At least a portion of the problem has been the Lick of an integrated development environment, tailored to High Energy Physics and incorporating a suite of Computer Aided Software Engineering tools. The Superconducting Super Collider Physics Research Division Computing Department is implementing pilot projects to develop just such an environment

Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

2003-03-15

The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

Development of code SFINEL (Spent fuel integrity evaluator)

Energy Technology Data Exchange (ETDEWEB)

Kim, Yong Soo; Min, Chin Young; Ohk, Young Kil; Yang, Yong Sik; Kim, Dong Ju; Kim, Nam Ku [Hanyang University, Seoul (Korea)

1999-01-01

SFINEL code, an integrated computer program for predicting the spent fuel rod integrity based on burn-up history and major degradation mechanisms, has been developed through this project. This code can sufficiently simulate the power history of a fuel rod during the reactor operation and estimate the degree of deterioration of spent fuel cladding using the recently-developed models on the degradation mechanisms. SFINEL code has been thoroughly benchmarked against the collected in-pile data and operating experiences: deformation and rupture, and cladding oxidation, rod internal pressure creep, then comprehensive whole degradation process. (author). 75 refs., 51 figs., 5 tabs.

Development and Integration of Professional Core Values Among Practicing Clinicians.

Science.gov (United States)

McGinnis, Patricia Quinn; Guenther, Lee Ann; Wainwright, Susan F

2016-09-01

The physical therapy profession has adopted professional core values, which define expected values for its members, and developed a self-assessment tool with sample behaviors for each of the 7 core values. However, evidence related to the integration of these core values into practice is limited. The aims of this study were: (1) to gain insight into physical therapists' development of professional core values and (2) to gain insight into participants' integration of professional core values into clinical practice. A qualitative design permitted in-depth exploration of the development and integration of the American Physical Therapy Association's professional core values into physical therapist practice. Twenty practicing physical therapists were purposefully selected to explore the role of varied professional, postprofessional, and continuing education experiences related to exposure to professional values. The Core Values Self-Assessment and résumé sort served as prompts for reflection via semistructured interviews. Three themes were identified: (1) personal values were the foundation for developing professional values, which were further shaped by academic and clinical experiences, (2) core values were integrated into practice independent of practice setting and varied career paths, and (3) participants described the following professional core values as well integrated into their practice: integrity, compassion/caring, and accountability. Social responsibility was an area consistently identified as not being integrated into their practice. The Core Values Self-Assessment tool is a consensus-based document developed through a Delphi process. Future studies to establish reliability and construct validity of the tool may be warranted. Gaining an in-depth understanding of how practicing clinicians incorporate professional core values into clinical practice may shed light on the relationship between core values mastery and its impact on patient care. Findings may

Core Flight System (CFS) Integrated Development Environment

Data.gov (United States)

National Aeronautics and Space Administration — The purpose of this project is to create an Integrated Development Environment (IDE) for the Core Flight System (CFS) software to reduce the time it takes to...

Trauma, Development and Peacebuilding : Toward an Integrated ...

International Development Research Centre (IDRC) Digital Library (Canada)

Trauma, Development and Peacebuilding : Toward an Integrated Psychological Approach. Some experts have begun to ... The psychosocial approach is an alternative way of thinking about trauma following political violence. ... Date de début.

INTEGRATED HSEQ MANAGEMENT SYSTEMS: DEVELOPMENTS AND TRENDS

Directory of Open Access Journals (Sweden)

Osmo Kauppila

2015-06-01

Full Text Available The integration of health and safety, environmental and quality (HSEQ management systems has become a current topic in the 21st century, as the need for systems thinking has grown along with the number of management system standards. This study aims to map current developments and trends in integrated HSEQ management. Three viewpoints are taken: the current state of the main HSEQ management standards, research literature on integrated management systems (IMS, and a case study of an industry-led HSEQ cluster in Northern Finland. The results demonstrate that some of the most prominent current trends are the harmonization of the high level structure of management systems by ISO, the evaluation of IMS, accounting for the supply chain in HSEQ issues, and sustainability and risk management. The results of the study can be used by practitioners to get a view of the current state of HSEQ management systems and their integration, and by researchers to seek out potential directions for HSEQ and IMS related research.

OSMOSIS: a new joint laboratory between SOFRADIR and ONERA for the development of advanced DDCA with integrated optics

Science.gov (United States)

Druart, Guillaume; Matallah, Noura; Guerineau, Nicolas; Magli, Serge; Chambon, Mathieu; Jenouvrier, Pierre; Mallet, Eric; Reibel, Yann

2014-06-01

Today, both military and civilian applications require miniaturized optical systems in order to give an imagery function to vehicles with small payload capacity. After the development of megapixel focal plane arrays (FPA) with micro-sized pixels, this miniaturization will become feasible with the integration of optical functions in the detector area. In the field of cooled infrared imaging systems, the detector area is the Detector-Dewar-Cooler Assembly (DDCA). SOFRADIR and ONERA have launched a new research and innovation partnership, called OSMOSIS, to develop disruptive technologies for DDCA to improve the performance and compactness of optronic systems. With this collaboration, we will break down the technological barriers of DDCA, a sealed and cooled environment dedicated to the infrared detectors, to explore Dewar-level integration of optics. This technological breakthrough will bring more compact multipurpose thermal imaging products, as well as new thermal capabilities such as 3D imagery or multispectral imagery. Previous developments will be recalled (SOIE and FISBI cameras) and new developments will be presented. In particular, we will focus on a dual-band MWIR-LWIR camera and a multichannel camera.

The Moral Development of The Child: An Integrated Model

Directory of Open Access Journals (Sweden)

Hing Keung eMa

2013-11-01

Full Text Available Previous theories of moral development such as those by Piaget and Kohlberg usually focused on the cognitive or rational aspect, and seldom included the affective aspect in their construction. The characteristics of the stages of moral development in the present paper are elaborated with special reference to psychological needs, altruism and human relationships, and justice reasoning. The three stages are: (1 Physical Survival, Selfishness and Obedience, (2 Love Needs, Reciprocal Altruism and Instrumental Purpose; and (3 Belongingness Needs, Primary Group Altruism and Mutual Interpersonal Expectations. At Stage 1, a deep and profound attachment to parents, empathy toward the significant others, and obedience to authorities all contribute to the physical survival of a person at this stage. People at Stage 2 are self-protective, dominant, exploitative and opportunistic. The need to love and to be loved is gratified on the basis of reciprocal altruism. People at Stage 3 have a strong desire to gratify their belongingness needs to a primary group. They are willing to sacrifice for the benefits of the group at great cost. While the psychological needs and altruism are related to the affective aspect of moral development, the justice reasoning is related to the cognitive aspect. The proposed theoretical model attempts to integrate the affective and cognitive aspects of moral development, and prototypic responses to questions related to hypothetical moral dilemmas are presented to substantiate the proposed stage structures. It is hypothesized that the sequence of these three stages is invariant of person and culture.

All-optical temporal integration of ultrafast pulse waveforms.

Science.gov (United States)

Park, Yongwoo; Ahn, Tae-Jung; Dai, Yitang; Yao, Jianping; Azaña, José

2008-10-27

An ultrafast all-optical temporal integrator is experimentally demonstrated. The demonstrated integrator is based on a very simple and practical solution only requiring the use of a widely available all-fiber passive component, namely a reflection uniform fiber Bragg grating (FBG). This design allows overcoming the severe speed (bandwidth) limitations of the previously demonstrated photonic integrator designs. We demonstrate temporal integration of a variety of ultrafast optical waveforms, including Gaussian, odd-symmetry Hermite Gaussian, and (odd-)symmetry double pulses, with temporal features as fast as ~6-ps, which is about one order of magnitude faster than in previous photonic integration demonstrations. The developed device is potentially interesting for a multitude of applications in all-optical computing and information processing, ultrahigh-speed optical communications, ultrafast pulse (de-)coding, shaping and metrology.

Workplace mental health: developing an integrated intervention approach

Science.gov (United States)

2014-01-01

Background Mental health problems are prevalent and costly in working populations. Workplace interventions to address common mental health problems have evolved relatively independently along three main threads or disciplinary traditions: medicine, public health, and psychology. In this Debate piece, we argue that these three threads need to be integrated to optimise the prevention of mental health problems in working populations. Discussion To realise the greatest population mental health benefits, workplace mental health intervention needs to comprehensively 1) protect mental health by reducing work–related risk factors for mental health problems; 2) promote mental health by developing the positive aspects of work as well as worker strengths and positive capacities; and 3) address mental health problems among working people regardless of cause. We outline the evidence supporting such an integrated intervention approach and consider the research agenda and policy developments needed to move towards this goal, and propose the notion of integrated workplace mental health literacy. Summary An integrated approach to workplace mental health combines the strengths of medicine, public health, and psychology, and has the potential to optimise both the prevention and management of mental health problems in the workplace. PMID:24884425

Developing engineering processes through integrated modelling of product and process

DEFF Research Database (Denmark)

Nielsen, Jeppe Bjerrum; Hvam, Lars

2012-01-01

This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

LabVIEW A Developer's Guide to Real World Integration

CERN Document Server

Fairweather, Ian

2011-01-01

LabVIEW(t) has become one of the preeminent platforms for the development of data acquisition and data analysis programs. LabVIEW(t): A Developer's Guide to Real World Integration explains how to integrate LabVIEW into real-life applications. Written by experienced LabVIEW developers and engineers, the book describes how LabVIEW has been pivotal in solving real-world challenges. Each chapter is self-contained and demonstrates the power and simplicity of LabVIEW in various applications, from image processing to solar tracking systems. Many of the chapters explore how exciting new technologies c

Development and integration of modern laboratories in aerospace education

Science.gov (United States)

Desautel, D.; Hunter, N.; Mourtos, N.; Pernicka, H.

1992-01-01

This paper describes the development and integration of a suite of laboratories in an aerospace engineering program. The program's approach to undergraduate education is described as the source for the development of the supporting laboratories. Nine laboratories supporting instruction were developed and installed. The nine laboratories include most major flight-vehicle disciplines. The purpose and major equipments/experiments of each laboratory are briefly described, as is the integration of the laboratory with coursework. The laboratory education provided by this program successfully achieves its purpose of producing competitive aerospace engineering graduates and advancing the level of undergraduate education.

Fostering Collaborations towards Integrative Research Development

Directory of Open Access Journals (Sweden)

Leonie Valentine

2013-05-01

Full Text Available The complex problems associated with global change processes calls for close collaboration between science disciplines to create new, integrated knowledge. In the wake of global change processes, forests and other natural environments have been rapidly changing, highlighting the need for collaboration and integrative research development. Few tools are available to explore the potential for collaborations in research ventures that are just starting up. This study presents a useful approach for exploring and fostering collaborations between academics working in research teams and organizations comprising multiple science disciplines (i.e., multi-disciplinary. The research aim was to reveal potential barriers, common ground, and research strengths between academics working in a new centre focused on forest and climate change research. This aim was based on the premise that raising awareness and working with this acquired knowledge fosters collaborations and integrative research development. An email survey was deployed amongst the academics to obtain: (i their understanding of common themes (e.g., climate change, scale of investigation, woodland/forest health/decline; (ii descriptions of the spatial and temporal scales of their research; and (iii their approach and perceived contributions to climate change research. These data were analysed using a semi-quantitative content analysis approach. We found that the main potential barriers were likely to be related to differences in understanding of the common research themes, whilst similarities and disciplinary strengths provided critical elements to foster collaborations. These findings were presented and discussed amongst the centre academics to raise awareness and create a dialogue around these issues. This process resulted in the development of four additional research projects involving multiple disciplines. The approach used in this study provides a useful methodology of broader benefit to

Box Integrals

Energy Technology Data Exchange (ETDEWEB)

Bailey, David H.; Borwein, Jonathan M.; Crandall, Richard E.

2006-06-01

By a "box integral" we mean here an expectation $\\langle|\\vec r - \\vec q|^s \\rangle$ where $\\vec r$runs over the unit $n$-cube,with $\\vec q$ and $s$ fixed, explicitly:\\begin eqnarray*&&\\int_01 \\cdots \\int_01 \\left((r_1 - q_1)2 + \\dots+(r_n-q_n)2\\right)^ s/2 \\ dr_1 \\cdots dr_n.\\end eqnarray* The study ofbox integrals leads one naturally into several disparate fields ofanalysis. While previous studies have focused upon symbolic evaluationand asymptotic analysis of special cases (notably $s = 1$), we workherein more generally--in interdisciplinary fashion--developing resultssuch as: (1) analytic continuation (in complex $s$), (2) relevantcombinatorial identities, (3) rapidly converging series, (4) statisticalinferences, (5) connections to mathematical physics, and (6)extreme-precision quadrature techniques appropriate for these integrals.These intuitions and results open up avenues of experimental mathematics,with a view to new conjectures and theorems on integrals of thistype.

Development and implementation of integrated management system

International Nuclear Information System (INIS)

Tomov, E.; Nenkova, B.

2013-01-01

Risk Engineering Ltd is a private Bulgarian company in the field of scientific technical consultancy and engineering services, established in 1990. The aim of this report is to present the experience of Risk Engineering Ltd. in the development, implementation and operation of an integrated management system. The process of implementation of the system was completed at the end of 2011. In January 2012, the Risk Engineering Integrated Management System was certified by Lloyd's Register for compliance with standards ISO 9001:2008, ISO 140001:2004 and BS OHSAS 18001:2007

Integrating Leadership Development throughout the Undergraduate Science Curriculum

Science.gov (United States)

Reed, Kelynne E.; Aiello, David P.; Barton, Lance F.; Gould, Stephanie L.; McCain, Karla S.; Richardson, John M.

2016-01-01

This article discusses the STEM (science, technology, engineering, and mathematics) Teaching and Research (STAR) Leadership Program, developed at Austin College, which engages students in activities integrated into undergraduate STEM courses that promote the development of leadership behaviors. Students focus on interpersonal communication,…

Arts Integration as Potentiality for Professional Development for Teachers

DEFF Research Database (Denmark)

Jensen, Julie Borup; McCandless, Peggy

2013-01-01

This paper investigates the potentialities for professional development, when teachers work with integration of arts and academic subjects in the classroom. The idea of integrating arts and academic subjects can be seen as a way of experimenting with teaching. Experiments in the classroom as a wa...

Fuel Cell Development and Test Laboratory | Energy Systems Integration

Science.gov (United States)

Facility | NREL Fuel Cell Development and Test Laboratory Fuel Cell Development and Test Laboratory The Energy System Integration Facility's Fuel Cell Development and Test Laboratory supports fuel cell research and development projects through in-situ fuel cell testing. Photo of a researcher running

STAR Algorithm Integration Team - Facilitating operational algorithm development

Science.gov (United States)

Mikles, V. J.

2015-12-01

The NOAA/NESDIS Center for Satellite Research and Applications (STAR) provides technical support of the Joint Polar Satellite System (JPSS) algorithm development and integration tasks. Utilizing data from the S-NPP satellite, JPSS generates over thirty Environmental Data Records (EDRs) and Intermediate Products (IPs) spanning atmospheric, ocean, cryosphere, and land weather disciplines. The Algorithm Integration Team (AIT) brings technical expertise and support to product algorithms, specifically in testing and validating science algorithms in a pre-operational environment. The AIT verifies that new and updated algorithms function in the development environment, enforces established software development standards, and ensures that delivered packages are functional and complete. AIT facilitates the development of new JPSS-1 algorithms by implementing a review approach based on the Enterprise Product Lifecycle (EPL) process. Building on relationships established during the S-NPP algorithm development process and coordinating directly with science algorithm developers, the AIT has implemented structured reviews with self-contained document suites. The process has supported algorithm improvements for products such as ozone, active fire, vegetation index, and temperature and moisture profiles.

Development of a switched integrator amplifier for high-accuracy optical measurements

International Nuclear Information System (INIS)

Mountford, John; Porrovecchio, Geiland; Smid, Marek; Smid, Radislav

2008-01-01

In the field of low flux optical measurements, the development and use of large area silicon detectors is becoming more frequent. The current/voltage conversion of their photocurrent presents a set of problems for traditional transimpedance amplifiers. The switched integration principle overcomes these limitations. We describe the development of a fully characterized current-voltage amplifier using the switched integrator technique. Two distinct systems have been developed in parallel at the United Kingdom's National Physical Laboratory (NPL) and Czech Metrology Institute (CMI) laboratories. We present the circuit theory and best practice in the design and construction of switched integrators. In conclusion the results achieved and future developments are discussed

Development of a switched integrator amplifier for high-accuracy optical measurements.

Science.gov (United States)

Mountford, John; Porrovecchio, Geiland; Smid, Marek; Smid, Radislav

2008-11-01

In the field of low flux optical measurements, the development and use of large area silicon detectors is becoming more frequent. The current/voltage conversion of their photocurrent presents a set of problems for traditional transimpedance amplifiers. The switched integration principle overcomes these limitations. We describe the development of a fully characterized current-voltage amplifier using the switched integrator technique. Two distinct systems have been developed in parallel at the United Kingdom's National Physical Laboratory (NPL) and Czech Metrology Institute (CMI) laboratories. We present the circuit theory and best practice in the design and construction of switched integrators. In conclusion the results achieved and future developments are discussed.

Programme on Integrated Seed Sector Development in Ethiopia

NARCIS (Netherlands)

Walsh, Stephen; Thijssen, M.H.

2016-01-01

The programme on Integrated Seed Sector Development in Ethiopia aims to strengthen the development of a vibrant, market-oriented and pluralistic seed sector in the country, where quality seed of superior varieties is available and affordable for a larger number of farmers, thereby contributing to

Framework programmable platform for the advanced software development workstation. Integration mechanism design document

Science.gov (United States)

Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Reddy, Uday; Ackley, Keith; Futrell, Mike

1991-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by this model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated.

Accessibility patterns and community integration among previously homeless adults: a Geographic Information Systems (GIS) approach.

Science.gov (United States)

Chan, Dara V; Gopal, Sucharita; Helfrich, Christine A

2014-11-01

Although a desired rehabilitation goal, research continues to document that community integration significantly lags behind housing stability success rates for people of a variety of ages who used to be homeless. While accessibility to resources is an environmental factor that may promote or impede integration activity, there has been little empirical investigation into the impact of proximity of community features on resource use and integration. Using a Geographic Information Systems (GIS) approach, the current study examines how accessibility or proximity to community features in Boston, United States related to the types of locations used and the size of an individual's "activity space," or spatial presence in the community. Significant findings include an inverse relationship between activity space size and proximity to the number and type of community features in one's immediate area. Specifically, larger activity spaces were associated with neighborhoods with less community features, and smaller activity spaces corresponded with greater availability of resources within one's immediate area. Activity space size also varied, however, based on proximity to different types of resources, namely transportation and health care. Greater community function, or the ability to navigate and use community resources, was associated with better accessibility and feeling part of the community. Finally, proximity to a greater number of individual identified preferred community features was associated with better social integration. The current study suggests the ongoing challenges of successful integration may vary not just based on accessibility to, but relative importance of, specific community features and affinity with one's surroundings. Community integration researchers and housing providers may need to attend to the meaning attached to resources, not just presence or use in the community. Copyright © 2014 Elsevier Ltd. All rights reserved.

Integrating interface slicing into software engineering processes

Science.gov (United States)

Beck, Jon

1993-01-01

Interface slicing is a tool which was developed to facilitate software engineering. As previously presented, it was described in terms of its techniques and mechanisms. The integration of interface slicing into specific software engineering activities is considered by discussing a number of potential applications of interface slicing. The applications discussed specifically address the problems, issues, or concerns raised in a previous project. Because a complete interface slicer is still under development, these applications must be phrased in future tenses. Nonetheless, the interface slicing techniques which were presented can be implemented using current compiler and static analysis technology. Whether implemented as a standalone tool or as a module in an integrated development or reverse engineering environment, they require analysis no more complex than that required for current system development environments. By contrast, conventional slicing is a methodology which, while showing much promise and intuitive appeal, has yet to be fully implemented in a production language environment despite 12 years of development.

Enviro-HIRLAM online integrated meteorology–chemistry modelling system: strategy, methodology, developments and applications (v7.2

Directory of Open Access Journals (Sweden)

A. Baklanov

2017-08-01

Full Text Available The Environment – High Resolution Limited Area Model (Enviro-HIRLAM is developed as a fully online integrated numerical weather prediction (NWP and atmospheric chemical transport (ACT model for research and forecasting of joint meteorological, chemical and biological weather. The integrated modelling system is developed by the Danish Meteorological Institute (DMI in collaboration with several European universities. It is the baseline system in the HIRLAM Chemical Branch and used in several countries and different applications. The development was initiated at DMI more than 15 years ago. The model is based on the HIRLAM NWP model with online integrated pollutant transport and dispersion, chemistry, aerosol dynamics, deposition and atmospheric composition feedbacks. To make the model suitable for chemical weather forecasting in urban areas, the meteorological part was improved by implementation of urban parameterisations. The dynamical core was improved by implementing a locally mass-conserving semi-Lagrangian numerical advection scheme, which improves forecast accuracy and model performance. The current version (7.2, in comparison with previous versions, has a more advanced and cost-efficient chemistry, aerosol multi-compound approach, aerosol feedbacks (direct and semi-direct on radiation and (first and second indirect effects on cloud microphysics. Since 2004, the Enviro-HIRLAM has been used for different studies, including operational pollen forecasting for Denmark since 2009 and operational forecasting atmospheric composition with downscaling for China since 2017. Following the main research and development strategy, further model developments will be extended towards the new NWP platform – HARMONIE. Different aspects of online coupling methodology, research strategy and possible applications of the modelling system, and fit-for-purpose model configurations for the meteorological and air quality communities are discussed.

Development of essential system technologies for advanced reactor - Development of natural circulation analysis code for integral reactor

Energy Technology Data Exchange (ETDEWEB)

Park, Goon Cherl; Park, Ik Gyu; Kim, Jae Hak; Lee, Sang Min; Kim, Tae Wan [Seoul National University, Seoul (Korea)

1999-04-01

The objective of this study is to understand the natural circulation characteristics of integral type reactors and to develope the natural circulation analysis code for integral type reactors. This study is focused on the asymmetric 3-dimensional flow during natural circulation such as 1/4 steam generator section isolation and the inclination of the reactor systems. Natural circulation experiments were done using small-scale facilities of integral reactor SMART (System-Integrated Modular Advanced ReacTor). CFX4 code was used to investigate the flow patterns and thermal mixing phenomena in upper pressure header and downcomer. Differences between normal operation of all steam generators and the 1/4 section isolation conditions were observed and the results were used as the data 1/4 section isolation conditions were observed and the results were used as the data for RETRAN-03/INT code validation. RETRAN-03 code was modified for the development of natural circulation analysis code for integral type reactors, which was development of natural circulation analysis code for integral type reactors, which was named as RETRAN-03/INT. 3-dimensional analysis models for asymmetric flow in integral type reactors were developed using vector momentum equations in RETRAN-03. Analysis results using RETRAN-03/INT were compared with experimental and CFX4 analysis results and showed good agreements. The natural circulation characteristics obtained in this study will provide the important and fundamental design features for the future small and medium integral reactors. (author). 29 refs., 75 figs., 18 tabs.

Development of integrated cask body and base plate

International Nuclear Information System (INIS)

Sasaki, T.; Koyama, Y.; Yoshida, T.; Wada, T.

2015-01-01

The average of occupancy of stored spent-fuel in the nuclear power plants have reached 70 percent and it is anticipated that the demand of metal casks for the storage and transportation of spent-fuel rise after resuming the operations. The main part of metal cask consists of main body, neutron shield and external cylinder. We have developed the manufacturing technology of Integrated Cask Body and Base Plate by integrating Cask Body and Base Plate as monolithic forging with the goal of cost reduction, manufacturing period shortening and further reliability improvement. Here, we report the manufacturing technology, code compliance and obtained properties of Integrated Cask body and Base Plate. (author)

The study and development of magnetic recording heads. A thin film integrated magnetic head

International Nuclear Information System (INIS)

Lazzari, Jean-Pierre

1970-01-01

A new integrated magnetic head is described. The head was made by vacuum deposition using a mask. A magnetically coupled multilayer construction led to high performance. The results obtained indicate that the device functions equally well, for reading and writing. A set of calculations was developed which could simulate and optimize the behavior of the recording head. The results obtained with the writing were in good agreement with those obtained from experiments and quite different from results which have been several times previously published. In addition a new method was developed for measuring high fields in confined spaces; a 1000 A diameter probe was used in conjunction with a low angle diffraction procedure. The measurements give results which are very different from those obtained by current theories based on the magnetic potentials at the surface. (author) [fr

78 FR 36089 - Airworthiness Directives; Hawker Beechcraft Corporation (Type Certificate Previously Held by...

Science.gov (United States)

2013-06-17

... Corporation (Type Certificate Previously Held by Raytheon Aircraft Company) Model BAe.125 Series 800A... structural damage or lead to divergent flutter, and result in loss of integrity of the wing, loss of control... to divergent flutter, and result in loss of integrity of the wing, loss of control of the airplane...

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Waste Integrated Performance and Safety Codes (IPSC) : FY10 development and integration.

Energy Technology Data Exchange (ETDEWEB)

Criscenti, Louise Jacqueline; Sassani, David Carl; Arguello, Jose Guadalupe, Jr.; Dewers, Thomas A.; Bouchard, Julie F.; Edwards, Harold Carter; Freeze, Geoffrey A.; Wang, Yifeng; Schultz, Peter Andrew

2011-02-01

This report describes the progress in fiscal year 2010 in developing the Waste Integrated Performance and Safety Codes (IPSC) in support of the U.S. Department of Energy (DOE) Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign. The goal of the Waste IPSC is to develop an integrated suite of computational modeling and simulation capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive waste storage or disposal system. The Waste IPSC will provide this simulation capability (1) for a range of disposal concepts, waste form types, engineered repository designs, and geologic settings, (2) for a range of time scales and distances, (3) with appropriate consideration of the inherent uncertainties, and (4) in accordance with robust verification, validation, and software quality requirements. Waste IPSC activities in fiscal year 2010 focused on specifying a challenge problem to demonstrate proof of concept, developing a verification and validation plan, and performing an initial gap analyses to identify candidate codes and tools to support the development and integration of the Waste IPSC. The current Waste IPSC strategy is to acquire and integrate the necessary Waste IPSC capabilities wherever feasible, and develop only those capabilities that cannot be acquired or suitably integrated, verified, or validated. This year-end progress report documents the FY10 status of acquisition, development, and integration of thermal-hydrologic-chemical-mechanical (THCM) code capabilities, frameworks, and enabling tools and infrastructure.

Implications of intelligent, integrated microsystems for product design and development

International Nuclear Information System (INIS)

MYERS, DAVID R.; MCWHORTER, PAUL J.

2000-01-01

Intelligent, integrated microsystems combine some or all of the functions of sensing, processing information, actuation, and communication within a single integrated package, and preferably upon a single silicon chip. As the elements of these highly integrated solutions interact strongly with each other, the microsystem can be neither designed nor fabricated piecemeal, in contrast to the more familiar assembled products. Driven by technological imperatives, microsystems will best be developed by multi-disciplinary teams, most likely within the flatter, less hierarchical organizations. Standardization of design and process tools around a single, dominant technology will expedite economically viable operation under a common production infrastructure. The production base for intelligent, integrated microsystems has elements in common with the mathematical theory of chaos. Similar to chaos theory, the development of microsystems technology will be strongly dependent on, and optimized to, the initial product requirements that will drive standardization--thereby further rewarding early entrants to integrated microsystem technology

Elementary Education Pre-Service Teachers' Development of Mathematics Technology Integration Skills in a Technology Integration Course

Science.gov (United States)

Polly, Drew

2015-01-01

Preparing pre-service teachers to effectively integrate technology in the classroom requires rich experiences that deepen their knowledge of technology, pedagogy, and content and the intersection of these aspects. This study examined elementary education pre-service teachers' development of skills and knowledge in a technology integration course…

Strategies of Integrated Rural Development Adopted by ...

African Journals Online (AJOL)

unique firstlady

organization of self-help and co-operative effort on the part of the community, but ..... which urban and rural areas are considered as an integral part of the ... through these approaches or models, rural development could be attained, but it is ...

Regional Integration, Trade and Private Sector Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Dr. Dirk Hansohm. Institution. Namibian Economic Policy Research Unit. Pays d' institution. Namibia. Site internet. http://www.nepru.org.na. Extrants. Rapports. Regional integration, trade and private sector development : final report. Contenus connexes. L'Initiative des conseils subventionnaires de la recherche scientifique ...

Management of information in development projects – a proposed integrated model

Directory of Open Access Journals (Sweden)

C. Bester

2008-11-01

Full Text Available The first section of the article focuses on the need for development in Africa and the specific challenges of development operations. It describes the need for a holistic and integrated information management model as part of the project management body of knowledge aimed at managing the information flow between communities and development project teams. It is argued that information, and access to information, is crucial in development projects and can therefore be seen as a critical success factor in any development project. In the second section of the article, the three information areas of the holistic and integrated information management model are described. In the section thereafter we suggest roles and actions for information managers to facilitate information processes integral to the model. These processes seek to create a developing information community that aligns itself with the development project, and supports and sustains it.

Integrated product development and experience of communication in education

NARCIS (Netherlands)

H. Ihle; Ir. Dick van Schenk Brill; Ir. Peter van Kollenburg; Ir. H.E.V. Veenstra

2000-01-01

The Technical Departments at the Fontys University of Professional Education in Eindhoven, The Netherlands, offer a course which is devel-oped around the principles of Concurrent Engi-neering. Integrated Product Development (IPD) project teams are multi-disciplinary groups which develop products in

Development of the multiwavelength monolithic integrated fiber optics terminal

Science.gov (United States)

Chubb, C. R.; Bryan, D. A.; Powers, J. K.; Rice, R. R.; Nettle, V. H.; Dalke, E. A.; Reed, W. R.

1982-01-01

This paper describes the development of the Multiwavelength Monolithic Integrated Fiber Optic Terminal (MMIFOT) for the NASA Johnson Space Center. The program objective is to utilize guided wave optical technology to develop wavelength-multiplexing and -demultiplexing units, using a single mode optical fiber for transmission between terminals. Intensity modulated injection laser diodes, chirped diffraction gratings and thin film lenses are used to achieve the wavelength-multiplexing and -demultiplexing. The video and audio data transmission test of an integrated optical unit with a Luneburg collimation lens, waveguide diffraction grating and step index condensing lens is described.

Feynman integral calculus

International Nuclear Information System (INIS)

Smirnov, V.A.

2006-01-01

The goal of the book is to summarize those methods for evaluating Feynman integrals that have been developed over a span of more than fifty years. The book characterizes the most powerful methods and illustrates them with numerous examples starting from very simple ones and progressing to nontrivial examples. The book demonstrates how to choose adequate methods and combine evaluation methods in a non-trivial way. The most powerful methods are characterized and then illustrated through numerous examples. This is an updated textbook version of the previous book (Evaluating Feynman integrals, STMP 211) of the author. (orig.)

Feynman integral calculus

Energy Technology Data Exchange (ETDEWEB)

Smirnov, V.A. [Lomonosov Moscow State Univ. (Russian Federation). Skobeltsyn Inst. of Nuclear Physics

2006-07-01

The goal of the book is to summarize those methods for evaluating Feynman integrals that have been developed over a span of more than fifty years. The book characterizes the most powerful methods and illustrates them with numerous examples starting from very simple ones and progressing to nontrivial examples. The book demonstrates how to choose adequate methods and combine evaluation methods in a non-trivial way. The most powerful methods are characterized and then illustrated through numerous examples. This is an updated textbook version of the previous book (Evaluating Feynman integrals, STMP 211) of the author. (orig.)

Development of Technology for Structural Integrity Evaluation

International Nuclear Information System (INIS)

Choun, Young Sun; Choi, I. K.; Kim, M. K. and others

2005-03-01

The purpose of this study is a development of seismic safety and structural integrity evaluation method of the structure in the Nuclear Power plant (NPP). The purpose of 1st sub-Topic is the development and improvement of the seismic safety evaluation methodology for the Nuclear Power Plant structures and safety related equipment. The purpose of 2nd sub-topic is the increasing of structure and equipment seismic capacity through the reducing of seismic force. The purpose of 3rd sub-topic is the development of 3-D nonlinear finite element analysis program for prestressed concrete containment building. The last purpose if the evaluation of the failure mechanism of containment structure and structure capacity and the assessment of integrity of containment through the of leakage test. As a result of this research, there are many research results were produced. The scenario earthquake developing method was developed and the effect of the structures and equipment was analyzed. The effectiveness of isolation system was determined and optimum isolation systems for each equipment were selected. The NUCAS-3D program for the 3 dimensional numerical analysis of containment building using the embedded tendon element and rebar element was developed. The tension behavior of containment building was examined and the leakage rate of the concrete crack was determined. The results of this research can be successfully used for many fields of integrity of NPP site. It can be used for development of design earthquake for the seismic design and safety evaluation and establishment of seismic safety evaluation program and seismic capacity improvement program for existing NPP. In case of seismic isolation part, it can be used for the application to the selection of optimum isolation devices for equipment isolation and to the effective evaluation of each seismic isolation devices. In containment analysis part, it can be used for ultimate pressure capacity evaluation of prestressed concrete

Systematic Procedure for Integrated Process Operation: Reverse Electro-Enhanced Dialysis (REED) during Lactic Acid Fermentation

DEFF Research Database (Denmark)

Prado Rubio, Oscar Andres; Jørgensen, Sten Bay; Jonsson, Gunnar Eigil

2011-01-01

The integration of lactic acid fermentation and Reverse Electro-Enhanced Dialysis (REED) is investigated based upon previously developed mathematical models. A goal driven process and operation design procedure is proposed and partially investigated. The conceptual analysis of the processes...... integration shows the need for an additional pH controller in the fermenten A PI controller is implemented and tested. The complete control structure for the integrated system consists of this PI controller in the fermenter plus a previously developed (Prado-Rubio et al., 2010) input resetting control...

An Integrated Sustainable Business and Development System: Thoughts and Opinions

Directory of Open Access Journals (Sweden)

Rachel J. C. Chen

2014-09-01

Full Text Available Companies understand the importance of monitoring and managing their environmental impacts and aim to integrate, with consistent quality control, effective reduce-reuse-recycle programs and risk preventions. By building an integrated sustainable business and development system to meet certain environmental standards, many companies are eligible to be “green” certified. Companies may consider recognizing global visions on sustainability while implementing local best practices. An integrated sustainable business and development system includes talent management, sustainable supply chain, practicing strategies of leveraging resources effectively, implementing social responsibilities, initiating innovative programs of recycling, reducing, and reusing, advancing leaders’ perceptions towards sustainability, reducing innovation barriers, and engaging sustainable practices strategically.

Progress and status of the integral fast reactor (IFR) development program

International Nuclear Information System (INIS)

Chang, Y.I.

1992-01-01

This paper discusses the Integral Fast Reactor (IFR) development program, in which the entire reactor system - reactor, fuel cycle, and waste process is being developed and optimized at the same time as a single integral entity. Detailed discussions on the present status of the IFR technology development activities in the areas of fuels, pyroprocessing, safety, core design, and fuel cycle demonstration are also presented

Integrating mental health and social development in theory and practice.

Science.gov (United States)

Plagerson, Sophie

2015-03-01

In many low and middle income countries, attention to mental illness remains compartmentalized and consigned as a matter for specialist policy. Despite great advances in global mental health, mental health policy and practice dovetail only to a limited degree with social development efforts. They often lag behind broader approaches to health and development. This gap ignores the small but growing evidence that social development unavoidably impacts the mental health of those affected, and that this influence can be both positive and negative. This article examines the theoretical and practical challenges that need to be overcome for a more effective integration of social development and mental health policy. From a theoretical perspective, this article demonstrates compatibility between social development and mental health paradigms. In particular, the capability approach is shown to provide a strong framework for integrating mental health and development. Yet, capability-oriented critiques on 'happiness' have recently been applied to mental health with potentially detrimental outcomes. With regard to policy and practice, horizontal and vertical integration strategies are suggested. Horizontal strategies require stronger devolution of mental health care to the primary care level, more unified messages regarding mental health care provision and the gradual expansion of mental health packages of care. Vertical integration refers to the alignment of mental health with related policy domains (particularly the social, economic and political domains). Evidence from mental health research reinforces aspects of social development theory in a way that can have tangible implications on practice. First, it encourages a focus on avoiding exclusion of those affected by or at risk of mental illness. Secondly, it underscores the importance of the process of implementation as an integral component of successful policies. Finally, by retaining a focus on the individual, it seeks to

A web-enabled system for integrated assessment of watershed development

Science.gov (United States)

Dymond, R.; Lohani, V.; Regmi, B.; Dietz, R.

2004-01-01

Researchers at Virginia Tech have put together the primary structure of a web enabled integrated modeling system that has potential to be a planning tool to help decision makers and stakeholders in making appropriate watershed management decisions. This paper describes the integrated system, including data sources, collection, analysis methods, system software and design, and issues of integrating the various component models. The integrated system has three modeling components, namely hydrology, economics, and fish health, and is accompanied by descriptive 'help files.' Since all three components have a related spatial aspect, GIS technology provides the integration platform. When completed, a user will access the integrated system over the web to choose pre-selected land development patterns to create a 'what if' scenario using an easy-to-follow interface. The hydrologic model simulates effects of the scenario on annual runoff volume, flood peaks of various return periods, and ground water recharge. The economics model evaluates tax revenue and fiscal costs as a result of a new land development scenario. The fish health model evaluates effects of new land uses in zones of influence to the health of fish populations in those areas. Copyright ASCE 2004.

The DySIIM Model for Managing IS Integration in Mergers and Acquisitions

DEFF Research Database (Denmark)

Henningsson, Stefan; Carlsson, Sven

2011-01-01

Corporate mergers and acquisitions (M&As) are prominent means for corporate strategy. In many M&As information systems (IS), integration is critical for achieving the intended goals. By integrating previous research on M&A and IS integration, we develop a six-dimensional theoretical framework...

POLARIS: Agent-based modeling framework development and implementation for integrated travel demand and network and operations simulations

Energy Technology Data Exchange (ETDEWEB)

Auld, Joshua; Hope, Michael; Ley, Hubert; Sokolov, Vadim; Xu, Bo; Zhang, Kuilin

2016-03-01

This paper discusses the development of an agent-based modelling software development kit, and the implementation and validation of a model using it that integrates dynamic simulation of travel demand, network supply and network operations. A description is given of the core utilities in the kit: a parallel discrete event engine, interprocess exchange engine, and memory allocator, as well as a number of ancillary utilities: visualization library, database IO library, and scenario manager. The overall framework emphasizes the design goals of: generality, code agility, and high performance. This framework allows the modeling of several aspects of transportation system that are typically done with separate stand-alone software applications, in a high-performance and extensible manner. The issue of integrating such models as dynamic traffic assignment and disaggregate demand models has been a long standing issue for transportation modelers. The integrated approach shows a possible way to resolve this difficulty. The simulation model built from the POLARIS framework is a single, shared-memory process for handling all aspects of the integrated urban simulation. The resulting gains in computational efficiency and performance allow planning models to be extended to include previously separate aspects of the urban system, enhancing the utility of such models from the planning perspective. Initial tests with case studies involving traffic management center impacts on various network events such as accidents, congestion and weather events, show the potential of the system.

Feynman integral calculus

CERN Document Server

Smirnov, Vladimir A

2006-01-01

The problem of evaluating Feynman integrals over loop momenta has existed from the early days of perturbative quantum field theory. The goal of the book is to summarize those methods for evaluating Feynman integrals that have been developed over a span of more than fifty years. `Feynman Integral Calculus' characterizes the most powerful methods in a systematic way. It concentrates on the methods that have been employed recently for most sophisticated calculations and illustrates them with numerous examples, starting from very simple ones and progressing to nontrivial examples. It also shows how to choose adequate methods and combine them in a non-trivial way. This is a textbook version of the previous book (Evaluating Feynman integrals, STMP 211) of the author. Problems and solutions have been included, Appendix G has been added, more details have been presented, recent publications on evaluating Feynman integrals have been taken into account and the bibliography has been updated.

A critical review of regional economic integration in China

OpenAIRE

Wang RUI

2015-01-01

Under the circumstances of economic globalization, regional economic integration has become the mainstream of current economic development for each country, so China has to pay more attention to it. The critical review on regional economic integration in China can lay a certain foundation and provide experience for the in-depth research. Main contents of regional economic integration are refined according to the previous studies and realities, including the integration of regional economic re...

PARTICULAR QUALITIES OF INTEGRATIONAL INTERACTION DEVELOPMENT OF THE FOOD INDUSTRY IN UKRAINE

Directory of Open Access Journals (Sweden)

N. Skopenko

2014-04-01

Full Text Available Integrated structures forming and their development is an effective area of improving the efficiency of agricultural enterprises in general and the food industry in particular. Specific features of this sector determine the feasibility of the priorities of integrational interaction between the food industry enterprieses and other market players. A forecast of integrational interaction of the food industry is made, issues of businesses and efficient tools of integration, depending on the stage of development of the industry are developed. There are some examples. Active integration, expansion by creating separate business units, integration in related field only if there is occurrence of synergy or as part of resource support is appropriate for beverage – energytonik producers, bottled drinking water, frozen food, pastry, organic products manufacturers. For producers of wines, alcoholic drinks, mineral water?flour we suggest horizontal and vertical integration, acquisitions of competitors, participation in various associations (unions, associations, diversification of production. For bread producers and bakery products, oils and fats, dairy and meat products, sugar, confectionery, processed fruit and vegetables we propose horizontal and vertical integration, diversification of production decline, disintegration through the provision or salling of non-core assets. For beer manufacturers and tobacco is urgent to use transnational integration, integration in other industries through the provision of disintegration or selling of non-core assets.

Integrated Bali Cattle Development Model Under Oil Palm Plantation

Directory of Open Access Journals (Sweden)

Rasali Hakim Matondang

2015-09-01

Full Text Available Bali cattle have several advantages such as high fertility and carcass percentage, easy adaptation to the new environment as well. Bali cattle productivity has not been optimal yet. This is due to one of the limitation of feed resources, decreasing of grazing and agricultural land. The aim of this paper is to describe Bali cattle development integrated with oil palm plantations, which is expected to improve productivity and increase Bali cattle population. This integration model is carried out by raising Bali cattle under oil palm plantation through nucleus estate scheme model or individual farmers estates business. Some of Bali cattle raising systems have been applied in the integration of palm plantation-Bali cattle. One of the intensive systems can increase daily weight gain of 0.8 kg/head, calfcrop of 35% per year and has the potency for industrial development of feed and organic fertilizer. In the semi-intensive system, it can improve the production of oil palm fruit bunches (PFB more than 10%, increase harvested-crop area to 15 ha/farmer and reduce the amount of inorganic fertilizer. The extensive system can produce calfcrop ³70%, improve ³30% of PFB, increase business scale ³13 cows/farmer and reduce weeding costs ³16%. Integrated Bali cattle development may provide positive added value for both, palm oil business and cattle business.

A decade of integration and collaboration: the development of integrated health care in Sweden 2000-2010

Directory of Open Access Journals (Sweden)

Bengt Ahgren

2011-03-01

Full Text Available Introduction: The recent history of integrated health care in Sweden is explored in this article, focusing on the first decade of the 2000s. In addition, there are some reflections about successes and setbacks in this development and challenges for the next decade.     Description of policy and practice: The first efforts to integrate health care in Sweden appeared in the beginning of the 1990s. The focus was on integration of intra-organisational processes, aiming at a more cost-effective health care provision. Partly as a reaction to the increasing economism at that time, there was also a growing interest in quality improvement. Out of this work emerged the "chains of care", integrating all health care providers involved in the care of specific patient groups. During the 2000s, many county councils have also introduced inter-organisational systems of "local health care". There has also been increasing collaboration between health professionals and other professional groups in different health and welfare services.  Discussion and conclusion: Local health care meant that the chains of care and other forms of integration and collaboration became embedded in a more integrative context. At the same time, however, policy makers have promoted free patient choice in primary health care and also mergers of hospitals and clinical departments. These policies tend to fragment the provision of health care and have an adverse effect on the development of integrated care. As a counterbalance, more efforts should be put into evaluation of integrated health care, in order to replace political convictions with evidence concerning the benefits of such health care provision.

Development of Integration in Manufacturing

DEFF Research Database (Denmark)

Sørensen, Torben; Trostmann, Erik

1996-01-01

significance to all manufacturing industries.International standardization based on the product model definition standard STEP (ISO10303) is playing a key role in promoting a modern approach to Product Data Technology. The initial release of STEP, consisting of twelve essential parts, has recently been...... must be extended to cope with descriptions of functional behavior of products.In the robotics area, Computer Aided Robotics (CAR) systems for design, off-line programming, and simulation are currently increasing their model features with new topics, such as multi-body dynamics, realistic motion......Current international developments in the broad field of Product Data Technology are advancing rapidly and are leading up to new levels of technology in product model definition, product model communications, enterprise integration and cooperation. These developments will be of strategic...

Marshall Space Flight Center Ground Systems Development and Integration

Science.gov (United States)

Wade, Gina

2016-01-01

Ground Systems Development and Integration performs a variety of tasks in support of the Mission Operations Laboratory (MOL) and other Center and Agency projects. These tasks include various systems engineering processes such as performing system requirements development, system architecture design, integration, verification and validation, software development, and sustaining engineering of mission operations systems that has evolved the Huntsville Operations Support Center (HOSC) into a leader in remote operations for current and future NASA space projects. The group is also responsible for developing and managing telemetry and command configuration and calibration databases. Personnel are responsible for maintaining and enhancing their disciplinary skills in the areas of project management, software engineering, software development, software process improvement, telecommunications, networking, and systems management. Domain expertise in the ground systems area is also maintained and includes detailed proficiency in the areas of real-time telemetry systems, command systems, voice, video, data networks, and mission planning systems.

Development of the Conceptual Basis for Enterprise Integrated Reporting

Directory of Open Access Journals (Sweden)

Budko Oksana V.

2017-09-01

Full Text Available The aim of the article is to study the conceptual basis for integrated reporting in terms of its drafting principles, taking into account the need to satisfy the information requests of interested parties regarding the company’s value in the long run and the level of implementation of its sustainable development strategy. As a result of the study, the goals of integrated reporting are defined, with consideration for the sustainable development strategy chosen by the company, which can be achieved by accomplishing tasks, among which a special role is played by the support of integrated thinking at making decisions about creating value in the short, medium and long term. It is indicated that the basis for preparing integrated reports is the use of clearly defined principles, both in respect to their list and content. The composition of the principles specified in the International Integrated Reporting Framework (IIRF is analyzed, and it is found that some of them require clarifying (strategic focus and future orientation, or defining as part of quality characteristics or requirements (reliability, comparability, interaction with stakeholders. The list of leading (basic principles is supplemented with additional principles (synergism, neutrality, efficiency, validity, logicality, the observance of which will ensure an increase in the value and content of integrated reporting. A prospect for further research is analysis of the defined by ISIR integrated reporting structure that requires improvement in part of the list of sections and their content, and will take into account the need to provide information in the interdependence of factors of economic, environmental and social influence and financial indicators in making decisions by stakeholders.

Psychological Contract Development: An Integration of Existing Knowledge to Form a Temporal Model

Directory of Open Access Journals (Sweden)

Kelly Windle

2014-07-01

Full Text Available The psychological contract has received substantial theoretical attention over the past two decades as a popular framework within which to examine contemporary employment relationships. Previous research mostly examines breach and violation of the psychological contract and its impact on employee organization outcomes. Few studies have employed longitudinal, prospective research designs to investigate the psychological contract and as a result, psychological contract content and formation are incompletely understood. It is argued that employment relationships may be better proactively managed with greater understanding of formation and changes in the psychological contract. We examine existing psychological contract literature to identify five key factors proposed to contribute to the formation of psychological contracts. We extend the current research by integrating these factors for the first time into a temporal model of psychological contract development.

Integrating incremental learning and episodic memory models of the hippocampal region.

NARCIS (Netherlands)

Meeter, M.; Myers, C.E; Gluck, M.A.

2005-01-01

By integrating previous computational models of corticohippocampal function, the authors develop and test a unified theory of the neural substrates of familiarity, recollection, and classical conditioning. This approach integrates models from 2 traditions of hippocampal modeling, those of episodic

Integrated co-operative governance in the context of sustainable development

Directory of Open Access Journals (Sweden)

Eric Nealer

2011-07-01

Keywords:Sustainable development, governance, co-operative governance, integrated,organising, and communication. Disciplines:Public Administration, Public Management, Social Welfare, Environmental Management, Municipal public service delivery, Social Development, Organisational Behaviour, Co-operative Governance, Communication, Sustainable Development, Sustainable Organisational Development

Developing a Cyberinfrastructure for integrated assessments of environmental contaminants.

Science.gov (United States)

Kaur, Taranjit; Singh, Jatinder; Goodale, Wing M; Kramar, David; Nelson, Peter

2005-03-01

The objective of this study was to design and implement prototype software for capturing field data and automating the process for reporting and analyzing the distribution of mercury. The four phase process used to design, develop, deploy and evaluate the prototype software is described. Two different development strategies were used: (1) design of a mobile data collection application intended to capture field data in a meaningful format and automate transfer into user databases, followed by (2) a re-engineering of the original software to develop an integrated database environment with improved methods for aggregating and sharing data. Results demonstrated that innovative use of commercially available hardware and software components can lead to the development of an end-to-end digital cyberinfrastructure that captures, records, stores, transmits, compiles and integrates multi-source data as it relates to mercury.

Fostering development of nursing practices to support integrated care when implementing integrated care pathways: what levers to use?

Science.gov (United States)

Longpré, Caroline; Dubois, Carl-Ardy

2017-11-29

Care integration has been the focus of recent health system reforms. Given their functions at all levels of the care continuum, nurses have a substantial and primordial role to play in such integration processes. The aim of this study was to identify levers and strategies that organizations can use to support the development of a nursing practice aligned with the requirements of care integration in a health and social services centre (HSSC) in Quebec. The research design was a cross-sectional descriptive qualitative study based on a single case study with nested levels of analysis. The case was a public, multi-disciplinary HSSC in a semi-urban region of Quebec. Semi-structured interviews with 37 persons (nurses, professionals, managers, administrators) allowed for data saturation and ensured theoretical representation by covering four care pathways constituting different care integration contexts. Analysis involved four steps: preparing a predetermined list of codes based on the reference framework developed by Minkman (2011); coding transcript content; developing general and summary matrices to group observations for each care pathway; and creating a general model showing the overall results for the four pathways. The organization's capacity for response with regard to developing an integrated system of services resulted in two types of complementary interventions. The first involved investing in key resources and renewing organizational structures; the second involved deploying a series of organizational and clinical-administrative processes. In resource terms, integration efforts resulted in setting up new strategic services, re-arranging physical infrastructures, and deploying new technological resources. Organizational and clinical-administrative processes to promote integration involved renewing governance, improving the flow of care pathways, fostering continuous quality improvement, developing new roles, promoting clinician collaboration, and strengthening

The development of integrated safety assessment technology

International Nuclear Information System (INIS)

Yoo, Keon Joong; Park, Chang Kyu; Kim, Tae Un; Han, Sang Hoon; Yang, Joon Eon; Lim, Tae Jin; Han, Jae Joo; Je, Moo Seong; An, Kwang Il; Kim, Shi Dal; Jeong, Jong Tae; Jeong, Kwang Seop; Jin, Yeong Ho; Kim, Dong Ha; Kim, Kil Yoo; Cho, Yeong Kyoon; Jeong, Won Dae; Jang, Seung Cheol; Choi, Yeong; Park, Soo Yong; Seong, Tae Yong; Song, Yong Man; Kang, Dae Il; Park, Jin Hee; Jang, Seon Joo; Hwang, Mi Jeong; Choi, Seon Yeong

1993-05-01

For the purpose of developing the integrated PSA methodology and computer codes, Level-1 and Level-2 PSA methodology and tools were reviewed and improved. The Level-1 PSA computer code package KIRAP was improved and released by the name of KIRAP Release 2.0 Several Human reliability analysis and common cause failure analysis methods was reviewed and compared. For the development of Level-2 PSA computer code, several level-1 and Level-2 interface methods and containment event tree development methods were reviewed and compared. And the new technology such as artificial intelligence was reviewed if the technology can be applied to the development of PSA methodology.(Author)

Sustainable Chemical Process Development through an Integrated Framework

DEFF Research Database (Denmark)

Papadakis, Emmanouil; Kumar Tula, Anjan; Anantpinijwatna, Amata

2016-01-01

This paper describes the development and the application of a general integrated framework based on systematic model-based methods and computer-aided tools with the objective to achieve more sustainable process designs and to improve the process understanding. The developed framework can be appli...... studies involve multiphase reaction systems for the synthesis of active pharmaceutical ingredients....

Instrument Development of Integrative Health and Wellness Assessment™.

Science.gov (United States)

McElligott, Deborah; Eckardt, Sarah; Montgomery Dossey, Barbara; Luck, Susan; Eckardt, Patricia

2017-12-01

The nurse coach role was developed to address the needs of our nation and the world for health and wellbeing. The Theory of Integrative Nurse Coaching provides a foundation for coaching interventions supporting health promotion, and a framework for the development of the Integrative Health and Wellness Assessment (IHWA) short form. This 36-question Likert-type scale self-reporting tool assists participants in assessing healthy behaviors through a self-reflection process, provides information for the coaching relationship, and may be an outcome measurement. This article describes the history of the IHWA tool and the development and pilot testing of the IHWA short form using guidelines provided by DeVellis. Results of the Kaiser-Meyer-Olkin test yielded a value of .520, and the Bartlett's test of sphericity was significant. Cronbach's alpha overall scale internal consistency was .88 ( n = 36). Pilot study results indicate that the scale could be improved through additional revision, and an ongoing study is in progress.

Mentoring to develop research selfefficacy, with particular reference to previously disadvantaged individuals

Directory of Open Access Journals (Sweden)

S. Schulze

2010-07-01

Full Text Available The development of inexperienced researchers is crucial. In response to the lack of research self-efficacy of many previously disadvantaged individuals, the article examines how mentoring can enhance the research self-efficacy of mentees. The study is grounded in the self-efficacy theory (SET – an aspect of the social cognitive theory (SCT. Insights were gained from an in-depth study of SCT, SET and mentoring, and from a completed mentoring project. This led to the formulation of three basic principles. Firstly, institutions need to provide supportive environmental conditions that facilitate research selfefficacy. This implies a supportive and efficient collective system. The possible effects of performance ratings and reward systems at the institution also need to be considered. Secondly, mentoring needs to create opportunities for young researchers to experience successful learning as a result of appropriate action. To this end, mentees need to be involved in actual research projects in small groups. At the same time the mentor needs to facilitate skills development by coaching and encouragement. Thirdly, mentors need to encourage mentees to believe in their ability to successfully complete research projects. This implies encouraging positive emotional states, stimulating self-reflection and self-comparison with others in the group, giving positive evaluative feedback and being an intentional role model.

Integrating care for people with depression: developments in the Netherlands

Directory of Open Access Journals (Sweden)

Adri H. Peters

2010-11-01

Full Text Available Introduction: In this article we describe the history and present state of integrated care for people with depression in the Netherlands. The central question is: what are the developments in integrated care for people with depression in the Netherlands?Methods: We describe these developments from the role of an observer, and make use of several sources: important Dutch policy documents and research documents, our own national survey carried out in 2007, a number of reports and project descriptions and searches in PubMed and Google. Also key people were contacted to supply additional information.Results: In the Netherlands two separate phases can be distinguished within integrated care for people with depression. From the beginning of the 1990s, specialized secondary Mental Health Care (MHC began to develop care programmes, including programmes for people with depression. The implementation of these care programmes has taken years. Mass usage of care programmes only went ahead once the large-scale mergers between ambulatory and clinical MHC organizations around 2000 had taken effect. An analysis of these programmes shows, that they did not lead to integration with primary care. This changed in the second phase from around 2000. Then attention was directed more towards strengthening the GP within the treatment of depression, collaboration between primary and specialized care and the development of collective integrated care packages.Discussion: We relate these developments to projects in other countries and discuss the scientific basis by using evidence of international literature reviews and metastudies. Some general recommendations are given about functional costing, the physical presence of MHC specialists in the primary care sector and the use of a common national standard for both primary care and specialized MHC.

Integration of Manufacturing and Development in Emerging Markets

DEFF Research Database (Denmark)

Søberg, Peder Veng; Wæhrens, Brian Vejrum

2011-01-01

The paper investigates the problems related to functional integration between manufacturing activities and R&D activities in emerging markets within multinational companies. A framework to this end is developed and illustrated in relation to four cases from multinational companies, which have...... established R&D and manufacturing in China or India. The findings point to the importance of contingencies such as industrial clock speed, technological complexity, as well as the extent to which local adaptation is needed. Keywords: Co-location, Emerging markets, Functional integration, Manufacturing, R&D....

Separations and safeguards model integration.

Energy Technology Data Exchange (ETDEWEB)

Cipiti, Benjamin B.; Zinaman, Owen

2010-09-01

Research and development of advanced reprocessing plant designs can greatly benefit from the development of a reprocessing plant model capable of transient solvent extraction chemistry. This type of model can be used to optimize the operations of a plant as well as the designs for safeguards, security, and safety. Previous work has integrated a transient solvent extraction simulation module, based on the Solvent Extraction Process Having Interaction Solutes (SEPHIS) code developed at Oak Ridge National Laboratory, with the Separations and Safeguards Performance Model (SSPM) developed at Sandia National Laboratory, as a first step toward creating a more versatile design and evaluation tool. The goal of this work was to strengthen the integration by linking more variables between the two codes. The results from this integrated model show expected operational performance through plant transients. Additionally, ORIGEN source term files were integrated into the SSPM to provide concentrations, radioactivity, neutron emission rate, and thermal power data for various spent fuels. This data was used to generate measurement blocks that can determine the radioactivity, neutron emission rate, or thermal power of any stream or vessel in the plant model. This work examined how the code could be expanded to integrate other separation steps and benchmark the results to other data. Recommendations for future work will be presented.

Development of mechanical design technology for integral reactor

International Nuclear Information System (INIS)

Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn; Kim, Jong Wook; Choi, Woo Seok

2002-03-01

This report is the final documentation of the 'Development of Mechanical Design Technology for Integral Reactor' which describes the design activities including reactor vessel assembly structural modelling, normal operation and transient analysis, preparation of design specification, major component stress analysis, evaluation of structural integrity, review of fabricability, maintenance and repair scheme, etc. To establish the design requirements and applicable codes and standards, each GDC criterion was reviewed regarding the SMART structural characteristics and design status, and then the applicability and point of issues were evaluated. To accomodate the result of the core optimization program, modification of pressure vessel and reactor internal components were carried out. SG nozzles were rearranged to penetrate the pressure vessel wall instead of the annular cover. Coolant flow path through the MCP impeller was revised and the adjacent structures were modified. Dynamic analysis model was developed reflecting all the structural changes to perform the seismic and BLPB analysis. Fracture mechanics evaluation on the structural integrity of the reactor pressure vessel was also conducted. Besides, equipment maintenance and replacement plan including the refueling scheme was discussed to confirm the embodiment of SMART through construction and operation

Improving occupational safety and health by integration into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety and h...... and studies of documents. A questionnaire regarding product development tasks and occupational safety and health were distributed to 30 design and production engineers. A total of 27 completed the questionnaire corresponding to a response rate of 90 per cent.......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety...... and health into the development process, especially the efforts and attitudes of design and production engineers', and (iii) to identify key actors'reflections on how to improve this integration. The study was based on qualitative as well as quantitative methods including interviews, questionnaires...

Development of FIR arrays with integrating amplifiers

Science.gov (United States)

Young, Erick T.

1988-08-01

The development of optimized photoconductor arrays suitable for far infrared space astronomical applications are described. Although the primary impetus is the production of a 16 by 16 element Ge:Ga demonstration array for SIRTF, the extension of this technology to Large Deployable Reflector (LDR) is considered. The optimization of Ge:Ga and Ge:Be photoconductor materials is discussed. In collaboration with Lawrence Berkeley Laboratory, measurements of FIR photoconductors with quantum efficiencies greater than 20 percent at 100 micrometers, and dark currents below 300 electrons/s are presented. Integrating J-FET amplifier technology is discussed. The current generation of integrating amplifiers has a demonstrated read noise of less than 20 electrons for an integration time of 100 s. The design is shown for a stackable 16 x n Ge:Ga array that utilizes a 16-channel monolithic version of the J-FET integrator. A part of the design is the use of a thin, thermally insulating substrate that allows the electronics to operate at the optimum temperature of 50 K while maintaining thermal and optical isolation from the detectors at 2 K. The power dissipation for the array is less than 16 mW. The array design may particularly be applicable to high resolution imaging spectrometers for LDR.

Integrating Career Development into the Accounting Curriculum

Science.gov (United States)

Wessels, Susan B.; Sumner, Dana F.

2014-01-01

This paper describes a series of integrated career development activities offered in several required courses which are designed to help accounting majors gain a competitive edge in the job market. Supported by a partnership between the School of Business and the Academic and Career Planning Office, the Career Tool Kit program consists of…

Towards Integrated Product and Package Development

OpenAIRE

Bramklev, Caroline

2007-01-01

The global company operates from a number of locations worldwide, resulting in implications for the transport, handling and storage of product and parts transported within the company as well as between the company divisions and suppliers and/or consumers. In these companies, the package becomes a frequently used object to complement product features and achieve an effective and efficient means of logistics. In this context, it is interesting to integrate package development in the product...

Progress and status of the Integral Fast Reactor (IFR) development program

International Nuclear Information System (INIS)

Chang, Yoon I.

1992-01-01

In the Integral Fast Reactor (IFR) development program, the entire reactor system -- reactor, fuel cycle, and waste process is being developed and optimized at the same time as a single integral entity. The ALMR reactor plant design is being developed by an industrial team headed by General Electric and is presented in a companion paper. Detailed discussions on the present status of the IFR technology development activities in the areas of fuels, pyroprocessing, safety, core design, and fuel cycle demonstration are presented in the other two companion papers that follows this

Progress and status of the Integral Fast Reactor (IFR) development program

Energy Technology Data Exchange (ETDEWEB)

Chang, Yoon I.

1992-04-01

In the Integral Fast Reactor (IFR) development program, the entire reactor system -- reactor, fuel cycle, and waste process is being developed and optimized at the same time as a single integral entity. The ALMR reactor plant design is being developed by an industrial team headed by General Electric and is presented in a companion paper. Detailed discussions on the present status of the IFR technology development activities in the areas of fuels, pyroprocessing, safety, core design, and fuel cycle demonstration are presented in the other two companion papers that follows this.

Progress and status of the Integral Fast Reactor (IFR) development program

Energy Technology Data Exchange (ETDEWEB)

Chang, Yoon I.

1992-01-01

In the Integral Fast Reactor (IFR) development program, the entire reactor system -- reactor, fuel cycle, and waste process is being developed and optimized at the same time as a single integral entity. The ALMR reactor plant design is being developed by an industrial team headed by General Electric and is presented in a companion paper. Detailed discussions on the present status of the IFR technology development activities in the areas of fuels, pyroprocessing, safety, core design, and fuel cycle demonstration are presented in the other two companion papers that follows this.

Integrated code development for studying laser driven plasmas

Energy Technology Data Exchange (ETDEWEB)

Takabe, Hideaki; Nagatomo, Hideo; Sunahara, Atsusi; Ohnishi, Naofumi; Naruo, Syuji; Mima, Kunioki [Osaka Univ., Suita (Japan). Inst. of Laser Engineering

1998-03-01

Present status and plan for developing an integrated implosion code are briefly explained by focusing on motivation, numerical scheme and issues to be developed more. Highly nonlinear stage of Rayleigh-Taylor instability of ablation front by laser irradiation has been simulated so as to be compared with model experiments. Improvement in transport and rezoning/remapping algorithms in ILESTA code is described. (author)

Development of a metallic high integrity container

International Nuclear Information System (INIS)

Haelsig, R.T.

1986-01-01

Nuclear Packaging, a Pacific Nuclear Company, developed a metallic high integrity container (HIC) for the burial of low level radioactive waste. This class of container has received the most extensive review of any burial container licensed in the United States. It is also the first container that has been licensed to meet the requirements of Nuclear Regulatory Commission Regulations 10CFR61. The design and subsequent review considered 300 years corrosion at a depth of 55 feet with no degradation of container structural integrity. The design also included a technical requirement that the container possess a positive vent that would exclude moisture. The alloy that was selected, allows for significant flexibility in container size and configuration which is essential to accommodating the various waste forms. This allowed the development of containers in various sizes and with a variety of closures, that accommodate the internal dimensions of various shipping shields and help minimize radiation exposure during packaging operations. The material used in the metallic container is high corrosion resistant which reduces the need for strict chemical controls at the waste generating facility. This acts to ease the operational requirements in the treatment of several waste streams. The design result is a family of metallic High Integrity Containers (HIC)s that meet all the performance criteria imposed by the regulations, as well as provide a disposable waste container with good transportation efficiency and minimum operational constraints

Users Ability to Share Knowledge when Integrated in New Product Development - Evidence from the Pharmaceutical Industry

DEFF Research Database (Denmark)

Smed, Marie; Salomo, Søren; Schultz, Carsten

their professional experiences, but also concerningissues, which go beyond their pre-defined role. The overall research question for this paper is therefore: Can usersability to share their knowledge obtained in product development integration be differentiated by topic area? Are topicareas related to their own......In technological intensive industries knowledge input from both internal and external sources is crucial (Ahuja 2000,Gulati ét al. 2000, Von Hippel 2005; Thompson 2005). A highly well informed and increasingly recognized source ofknowledge is users of these technological products. By establishing...... and maintaining a close network with key users,firms can tap into unique knowledge, which can be useful in product development processes (Urban and von Hippel1988, Shah 2000, Rothwell 1994). Previous studies have here pointed to the professional capabilities of users, whichmay generate a community of common...

Integrated fuel processor development

International Nuclear Information System (INIS)

Ahmed, S.; Pereira, C.; Lee, S. H. D.; Krumpelt, M.

2001-01-01

The Department of Energy's Office of Advanced Automotive Technologies has been supporting the development of fuel-flexible fuel processors at Argonne National Laboratory. These fuel processors will enable fuel cell vehicles to operate on fuels available through the existing infrastructure. The constraints of on-board space and weight require that these fuel processors be designed to be compact and lightweight, while meeting the performance targets for efficiency and gas quality needed for the fuel cell. This paper discusses the performance of a prototype fuel processor that has been designed and fabricated to operate with liquid fuels, such as gasoline, ethanol, methanol, etc. Rated for a capacity of 10 kWe (one-fifth of that needed for a car), the prototype fuel processor integrates the unit operations (vaporization, heat exchange, etc.) and processes (reforming, water-gas shift, preferential oxidation reactions, etc.) necessary to produce the hydrogen-rich gas (reformate) that will fuel the polymer electrolyte fuel cell stacks. The fuel processor work is being complemented by analytical and fundamental research. With the ultimate objective of meeting on-board fuel processor goals, these studies include: modeling fuel cell systems to identify design and operating features; evaluating alternative fuel processing options; and developing appropriate catalysts and materials. Issues and outstanding challenges that need to be overcome in order to develop practical, on-board devices are discussed

Backward Integration: A Panacea for Rural Development in Nigeria

Directory of Open Access Journals (Sweden)

Rasaq Alabi Olanrewaju

2016-12-01

Full Text Available Business is like a marathon race. It involves both mental and psychical alertness, exploring opportunities and taking chances is the strength, risk is the rule of the game and control is the price for the race. To this end, the aim of every business entity is to operate profitably in the industry it belongs, grow and possibly gain the largest share of the industry market. Among the strategies used in gaining control in the business industry is Integration which is the ability to influence or control either or both raw material input (backward integration or the distribution chain (forward integration or better still grow towards possible monopoly (conglomerate. While effort will be made to discuss other types of integration, this paper will focus more on the backward integration programme, its effect on the survival and growth of business entities, advantages and disadvantages to business operation and its role in rural development in Nigeria.

Software Testbed for Developing and Evaluating Integrated Autonomous Subsystems

Science.gov (United States)

Ong, James; Remolina, Emilio; Prompt, Axel; Robinson, Peter; Sweet, Adam; Nishikawa, David

2015-01-01

To implement fault tolerant autonomy in future space systems, it will be necessary to integrate planning, adaptive control, and state estimation subsystems. However, integrating these subsystems is difficult, time-consuming, and error-prone. This paper describes Intelliface/ADAPT, a software testbed that helps researchers develop and test alternative strategies for integrating planning, execution, and diagnosis subsystems more quickly and easily. The testbed's architecture, graphical data displays, and implementations of the integrated subsystems support easy plug and play of alternate components to support research and development in fault-tolerant control of autonomous vehicles and operations support systems. Intelliface/ADAPT controls NASA's Advanced Diagnostics and Prognostics Testbed (ADAPT), which comprises batteries, electrical loads (fans, pumps, and lights), relays, circuit breakers, invertors, and sensors. During plan execution, an experimentor can inject faults into the ADAPT testbed by tripping circuit breakers, changing fan speed settings, and closing valves to restrict fluid flow. The diagnostic subsystem, based on NASA's Hybrid Diagnosis Engine (HyDE), detects and isolates these faults to determine the new state of the plant, ADAPT. Intelliface/ADAPT then updates its model of the ADAPT system's resources and determines whether the current plan can be executed using the reduced resources. If not, the planning subsystem generates a new plan that reschedules tasks, reconfigures ADAPT, and reassigns the use of ADAPT resources as needed to work around the fault. The resource model, planning domain model, and planning goals are expressed using NASA's Action Notation Modeling Language (ANML). Parts of the ANML model are generated automatically, and other parts are constructed by hand using the Planning Model Integrated Development Environment, a visual Eclipse-based IDE that accelerates ANML model development. Because native ANML planners are currently

Management of Vertically Integrated Systems Formation and Development in the Russian Economy

Directory of Open Access Journals (Sweden)

Kozhevnikov Sergei Aleksandrovich

2017-01-01

Full Text Available The article reviews the essence, nature, features and basic approaches to the interpretation of vertical integration. It proves that one of the key conditions for modernizing and neo-industrializing domestic economy and transforming Russia into an industrialized country is overcoming technological fragmentation of business entities, as was the case in the Soviet Union and is now observed in the developed countries. In this situation, it is vertical integration which can ensure the diversification and restructuring of the economy, the linkage between the extractive and processing industries. Based on the results of analyzing the activities of major multinational corporations (Royal Dutch Shell, Sinopec Corp., Valio Ltd. etc. it has been proved that these integrated systems supply competitive products with high degrees of processing and serve as growth drivers in developed economies. To justify this, the author calculated the companies’ value added multiplier. Currently, vertically integrated systems such as PhosAgro PJSC, LUKOIL PJSC, Miratorg agro-industrial holding company, KamAZ OJSC, Arkhangelsk pulp and paper mill PJSC operate in various economic sectors. The article shows that most of these companies’ level of technological integration is still not optimal; the formation of a full production chain is an additional factor in their development and competitive recovery. Accordingly, the author believes that the key objective of federal and regional authorities should be the transformational change in the economy by eliminating its disintegration and restoring processing chains of value added in priority economic sectors. The example of metallurgical industries integration (Steel Manufacture PJSC and machine-building integration (Mashinostroitel Corporation JSC shows many positive internal and external impacts of this kind of association. The creation of vertically integrated systems implies the development of a public policy which, through

Indigenous development of system integration for proton exchange membrane fuel cell operation

International Nuclear Information System (INIS)

Hussain, S.; Arshad, M.; Anjum, A.R.

2011-01-01

System integration was developed for fuel cell to control various parameters including voltage, current, power, temperature, pressure of gas (H/sub 2/), humidification, etc. The compact software has also been developed for monitoring different parameters of fuel cell system. System integrated was installed on fuel cell stack to manipulate these parameters. The compact software has been linked with the integrated system for visual monitoring of different parameters of fuel cell system during operation on PC. The installation of software and integrated system on fuel cell stack is the key achievement for the safe operation of fuel cell stack and for the provision of requisite power to any electric device for optimum performance. The compact software was developed for micro controller in KIEL. Control card and driver card are controlled by software-driven micro controller. A communication protocol was designed and developed. PC software has been developed to control and watch the values of all parameters of fuel cell such as voltage, current, power, temperature, pressure of hydrogen, pressure of oxygen, operational times and performance of the system on computer screen. (author)

Infrastructure development for ASEAN economic integration

OpenAIRE

Bhattacharyay, Biswa Nath

2009-01-01

With a population of 600 million, ASEAN is considered to be one of the most diverse regions in the world. It is also one of the world's fastest growing regions. ASEAN's aim is to evolve into an integrated economic community by 2015. Crucial to achieving this ambitious target is cooperation in infrastructure development for physical connectivity, particularly in cross-border infrastructure. This paper provides an overview of the quantity and quality of existing infrastructure in ASEAN member c...

Experience of developing an integrated nondestructive assay system

International Nuclear Information System (INIS)

Hsue, S.T.; Baker, M.P.

1987-01-01

A consortium of laboratories is collaborating with the Savannah River Plant to develop an integrated system of state-of-the-art nondestructive assay (NDA) instrumentation to provide nuclear materials accounting and process control information for a new plutonium scrap recovery facility. Individual instruments report assay results to an instrument control computer (ICC); the ICC, in turn, is part of a larger computer network that includes computers that perform process control and materials accounting functions. The design of the integrated NDA measurement system is shown. Each NDA instrument that is part of the integrated system is microcomputer-based and thus is capable of stand-alone operation if the central computer is out of service. Certain hardware features, such as microcomputers, pulse processing modules, and multichannel analyzers, are standardized throughout the system. Another standard feature is the communication between individual NDA instruments and the ICC. The most unique phase of the project is the integral staging. The primary purpose of this phase is to check the communications between various computers and to verify the ICC software during the operation of the NDA instruments. Implementing this integrated system in a process environment represents a major step in realizing the full capabilities of modern NDA instrumentation

Integrating personality structure, personality process, and personality development

NARCIS (Netherlands)

Baumert, Anna; Schmitt, Manfred; Perugini, Marco; Johnson, Wendy; Blum, Gabriela; Borkenau, Peter; Costantini, Giulio; Denissen, J.J.A.; Fleeson, William; Grafton, Ben; Jayawickreme, Eranda; Kurzius, Elena; MacLeod, Colin; Miller, Lynn C.; Read, Stephen J.; Robinson, Michael D.; Wood, Dustin; Wrzus, Cornelia

2017-01-01

In this target article, we argue that personality processes, personality structure, and personality development have to be understood and investigated in integrated ways in order to provide comprehensive responses to the key questions of personality psychology. The psychological processes and

[Development method of healthcare information system integration based on business collaboration model].

Science.gov (United States)

Li, Shasha; Nie, Hongchao; Lu, Xudong; Duan, Huilong

2015-02-01

Integration of heterogeneous systems is the key to hospital information construction due to complexity of the healthcare environment. Currently, during the process of healthcare information system integration, people participating in integration project usually communicate by free-format document, which impairs the efficiency and adaptability of integration. A method utilizing business process model and notation (BPMN) to model integration requirement and automatically transforming it to executable integration configuration was proposed in this paper. Based on the method, a tool was developed to model integration requirement and transform it to integration configuration. In addition, an integration case in radiology scenario was used to verify the method.

Supplier integration for new product developments: antecedents for supplier integration in modular product designs

NARCIS (Netherlands)

Eggers, Justus Erich

2016-01-01

Original equipment manufacturers (OEMs) increasingly integrate supplier resources in new product developments (NPD) to overcome bottlenecks of resource and to create competitive advantages. At the same time, OEMs react to the new market challenges by implementing modular product designs. Despite the

Development of cask body integrated with bottom plate

International Nuclear Information System (INIS)

Yoshida, Takuji; Sasaki, Tomoharu; Koyama, Yoichi; Kumagai, Yasuyuki; Watanabe, Yuichi; Takasa, Seiju

2017-01-01

The main parts of a metal cask for storage and transport of spent nuclear fuel consists of main body, neutron shield material and external cylinder. The forged main body has been manufactured as a cup shape by welding of 'forged body' and 'forged bottom plate' which are independently forged. JSW has developed the manufacturing technology of 'cask body integrated with bottom plate' which has no weld line with the goal of cost reduction, manufacturing period shortening and further reliability improvement. Manufacturing for the prototype of 'cask body integrated with bottom plate' has completed to verify mechanical properties and uniformity of the product which satisfy the specified values stipulated in JSME Code S FA1 2007 edition. Here, we report the manufacturing technology and obtained properties of 'cask body integrated with bottom plate'. (author)

Integration of Sustainable Development in Sanitary Engineering Education in Sweden

Science.gov (United States)

Rydhagen, B.; Dackman, C.

2011-01-01

In the Swedish Act for higher education, as well as in the policies of technical universities, it is stated that sustainable development (SD) should be integrated into engineering education. Researchers argue that SD needs to be integrated into the overall course content rather than added as a specific course. In this paper, six engineering…

Macro-level integrated renewable energy production schemes for sustainable development

International Nuclear Information System (INIS)

Subhadra, Bobban G.

2011-01-01

The production of renewable clean energy is a prime necessity for the sustainable future existence of our planet. However, because of the resource-intensive nature, and other challenges associated with these new generation renewable energy sources, novel industrial frameworks need to be co-developed. Integrated renewable energy production schemes with foundations on resource sharing, carbon neutrality, energy-efficient design, source reduction, green processing plan, anthropogenic use of waste resources for the production green energy along with the production of raw material for allied food and chemical industries is imperative for the sustainable development of this sector especially in an emission-constrained future industrial scenario. To attain these objectives, the scope of hybrid renewable production systems and integrated renewable energy industrial ecology is briefly described. Further, the principles of Integrated Renewable Energy Park (IREP) approach, an example for macro-level energy production, and its benefits and global applications are also explored. - Research highlights: → Discusses the need for macro-level renewable energy production schemes. → Scope of hybrid and integrated industrial ecology for renewable energy production. → Integrated Renewable Energy Parks (IREPs): A macro-level energy production scheme. → Discusses the principle foundations and global applications of IREPs. → Describes the significance of IREPs in the carbon-neutral future business arena.

A Comparison of the Development of Audiovisual Integration in Children with Autism Spectrum Disorders and Typically Developing Children

Science.gov (United States)

Taylor, Natalie; Isaac, Claire; Milne, Elizabeth

2010-01-01

This study aimed to investigate the development of audiovisual integration in children with Autism Spectrum Disorder (ASD). Audiovisual integration was measured using the McGurk effect in children with ASD aged 7-16 years and typically developing children (control group) matched approximately for age, sex, nonverbal ability and verbal ability.…

Development of SFR Research and Integration Management System (S-RIMS)

International Nuclear Information System (INIS)

Cho, Chung Ho; Chang, Jin Wook; Kim, Young Gyun; Kim, Yeong Il

2011-01-01

Up to the present, the management of research and development (R and D) for a sodium cooled fast reactor (SFR) could be individually performed on each project without an organic relationship. However, a more systemic and effective integrated management of a project is required because the research and development environment is currently changing. Thus, we developed a Research and Integration Management System for SFR (S-RIMS) based on the enterprise project management (EPM) solution. The functional goals of the S-RIMS are as follows: 1. Provide data that show the progress and status of a project 2. Manage the design process and R and D products 3. Share the consistent design data between sub-projects

Integration of multi-level marketing management systems geographically industry development

OpenAIRE

Aleksandr Lavrov; Lada Polikarpova; Alla Handramai

2015-01-01

In the article the authors attempt to develop a multi-level management system territorially industry development in market conditions, built in the widespread use of various types of marketing and their horizontal and vertical integration.

Sustainable Urban (re-Development with Building Integrated Energy, Water and Waste Systems

Directory of Open Access Journals (Sweden)

Tae-Goo Lee

2013-03-01

Full Text Available The construction and service of urban infrastructure systems and buildings involves immense resource consumption. Cities are responsible for the largest component of global energy, water, and food consumption as well as related sewage and organic waste production. Due to ongoing global urbanization, in which the largest sector of the global population lives in cities which are already built, global level strategies need to be developed that facilitate both the sustainable construction of new cities and the re-development of existing urban environments. A very promising approach in this regard is the decentralization and building integration of environmentally sound infrastructure systems for integrated resource management. This paper discusses such new and innovative building services engineering systems, which could contribute to increased energy efficiency, resource productivity, and urban resilience. Applied research and development projects in Germany, which are based on integrated system approaches for the integrated and environmentally sound management of energy, water and organic waste, are used as examples. The findings are especially promising and can be used to stimulate further research and development, including economical aspects which are crucial for sustainable urban (re-development.

The development of pipeline integrity management in the world and practice in China

Energy Technology Data Exchange (ETDEWEB)

Shaohua, Dong; Qing, Wang; Feifan [China National Petroleum Corporation (CNPC), Beijing (China)

2009-07-01

The paper analyzed the pipeline integrity management latest development, and the relationship among HSE management, pipeline integrity management (PIM) and asset integrity management (AIM). CNPC is a pioneer of China industry on implementation of pipeline integrity management by using latest developed technologies such as in-line inspection, GIS, Risk assessment and advanced repair technologies, and it is typical model of PIM in China pipeline who supply the gas to whole Beijing city. With smart pigging inspection and implementation of GIS and EAM(enterprise assets management) system on two thousand kilometers of Shaanxi-Beijing gas pipeline BHGC is able to manage pipeline integrity in five areas which include pipe materials safety, nature and geotechnical hazards management, coating and corrosion protection, stationing and associated facilities maintenance, and underground gas storage integrity. This paper presents latest achievement of BHGC in their pipeline integrity programs. (author)

A Posteriori Integration of University CAPE Software Developments

DEFF Research Database (Denmark)

Tolksdorf, Gregor; Fillinger, Sandra; Wozny, Guenter

2015-01-01

This contribution deals with the mutual integration of existing CAPE software products developed at different universities in Germany, Denmark, and Italy. After the motivation MOSAIC is presented as the bridge building the connection between the modelling tool ICAS-MoT and the numerical processin...

Sustainable energy development as an integral part of hydroelectric business management

International Nuclear Information System (INIS)

Lee, W.; Yu, M.; Young, C.

1996-01-01

Elements of Ontario Hydro's strategy for sustainable energy development were discussed, highlighting key developments in the business management practices in Ontario Hydro's Hydroelectric Business Unit. Sustainable development considerations are now integral part of any business case analysis; management of the environment also has been integrated into the Utilities' business management process. Several environmental management practices intended to enhance sustainability have been introduced, including a full-fledged environmental management system based on ISO 14001 standards. Energy efficiency opportunities are aggressively pursued, including turbine upgrades, and energy efficient lighting. Experience to date indicates that business performance and progress towards sustainable energy development need not be mutually exclusive

Aspects regarding the adoption and development of integrated reporting practices

Directory of Open Access Journals (Sweden)

Lapteș Ramona

2018-01-01

Full Text Available The current economic context brings about new challenges and responsibilities that companies have to face in the communication area based on the principle of sustainable development. This refers to both- protecting the interests of all economic agents involved and minimizing the aggression on natural resources. Hence, entities’ communication process was reconsidered in the form of integrated reporting. This relatively new type of reporting is continuously under evelopment at an international level and it was better understood in practice through the Integrated Reporting Pilot Programme . This paper aims to present the integrated reporting practices of Danone, one of the members of the Pilot Programme through a case study approach. Notwithstanding the experience it should have in the integrated reporting area, o ur findings show that Danone issued a document entitled “Integrated report” only in 2016. Until this year, the firm cho se to publish two reports related to economic and social issues and sustainability, rather combined than integrated.

Supplier integration in product development: A matter of designing the project structure

Directory of Open Access Journals (Sweden)

Mike Danilovic

2007-11-01

Full Text Available In product development close collaboration between systems integrators and suppliers is important. The purpose of this article is to investigate the impact of the work breakdown structure (WBS and work packages (WPs in product development on the possibility of carrying through the strategy of supplier involvement into collaborative practice and to investigate how supplier involvement can be improved by altering the design of collaborative WBS and WP structures. Dependence Structure Matrix (DSM is introduced in order to analyse, visualise and manage interdependencies, in terms of information exchange between the systems integrator and supplier. This article shows how DSM can support the alternative design of integrated and collaborative WBS and integrated WPs following the logic of dependencies and the flow of information in order to support a strategy focusing on integration of suppliers on project and team level.

Progress in the development of integrated mental health care in Scotland

Directory of Open Access Journals (Sweden)

Kevin Woods

2002-06-01

Full Text Available The development of integrated care through the promotion of ‘partnership working’ is a key policy objective of the Scottish Executive, the administration responsible for health services in Scotland. This paper considers the extent to which this goal is being achieved in mental health services, particularly those for people with severe and enduring mental illness. Distinguishing between the horizontal and vertical integration of services, exploratory research was conducted to assess progress towards this objective by examining how far a range of functional activities in Primary Care Trusts (PCTs and their constituent Local Health Care Co-operatives (LHCCs were themselves becoming increasingly integrated. All PCTs in Scotland were surveyed by postal questionnaire, and followed up by detailed telephone interviews. Six LHCC areas were selected for detailed case study analysis. A Reference Group was used to discuss and review emerging themes from the fieldwork. The report suggests that faster progress is being made in the horizontal integration of services between health and social care organisations than is the case for vertical integration between primary health care and specialist mental health care services; and that there are significant gaps in the extent to which functional activities within Trusts are changing to support the development of integrated care. A number of models are briefly considered, including the idea of ‘intermediate care’ that might speed the process of integration.

Definition, analysis and development of an optical data distribution network for integrated avionics and control systems. Part 2: Component development and system integration

Science.gov (United States)

Yen, H. W.; Morrison, R. J.

1984-01-01

Fiber optic transmission is emerging as an attractive concept in data distribution onboard civil aircraft. Development of an Optical Data Distribution Network for Integrated Avionics and Control Systems for commercial aircraft will provide a data distribution network that gives freedom from EMI-RFI and ground loop problems, eliminates crosstalk and short circuits, provides protection and immunity from lightning induced transients and give a large bandwidth data transmission capability. In addition there is a potential for significantly reducing the weight and increasing the reliability over conventional data distribution networks. Wavelength Division Multiplexing (WDM) is a candidate method for data communication between the various avionic subsystems. With WDM all systems could conceptually communicate with each other without time sharing and requiring complicated coding schemes for each computer and subsystem to recognize a message. However, the state of the art of optical technology limits the application of fiber optics in advanced integrated avionics and control systems. Therefore, it is necessary to address the architecture for a fiber optics data distribution system for integrated avionics and control systems as well as develop prototype components and systems.

Southern Africa’s Water–Energy Nexus: Towards Regional Integration and Development

Directory of Open Access Journals (Sweden)

Tafadzwanashe Mabhaudhi

2016-06-01

Full Text Available The Southern African Development Community’s (SADC water and energy sectors are under increasing pressure due to population growth and agricultural and industrial development. Climate change is also negatively impacting on the region’s water and energy resources. As the majority of SADC’s population lives in poverty, regional development and integration are underpinned by water and energy security as the watercourses in the region are transboundary in nature. This paper reviews the region’s water and energy resources and recommends policies based on the water–energy nexus approach. This is achieved by reviewing literature on water and energy resources as well as policy issues. Water resources governance provides a strong case to create a water–energy nexus platform to support regional planning and integration as SADC countries share similar climatic and hydrological conditions. However, there has been a gap between water and energy sector planning in terms of policy alignment and technical convergence. These challenges hinder national policies on delivering economic and social development goals, as well as constraining the regional goal of greater integration. Regional objectives on sustainable energy and access to clean water for all can only be achieved through the recognition of the water–energy nexus, championed in an integrated and sustainable manner. A coordinated regional water–energy nexus approach stimulates economic growth, alleviates poverty and reduces high unemployment rates. The shared nature of water and energy resources requires far more transboundary water–energy nexus studies to be done in the context of regional integration and policy formulation.

Integration of safety engineering into a cost optimized development program.

Science.gov (United States)

Ball, L. W.

1972-01-01

A six-segment management model is presented, each segment of which represents a major area in a new product development program. The first segment of the model covers integration of specialist engineers into 'systems requirement definition' or the system engineering documentation process. The second covers preparation of five basic types of 'development program plans.' The third segment covers integration of system requirements, scheduling, and funding of specialist engineering activities into 'work breakdown structures,' 'cost accounts,' and 'work packages.' The fourth covers 'requirement communication' by line organizations. The fifth covers 'performance measurement' based on work package data. The sixth covers 'baseline requirements achievement tracking.'

Integrated product development: Competencies meet and products arise

DEFF Research Database (Denmark)

Jensen, Birger Boutrup; Stacey, Julia

2000-01-01

and process competencies throughout the whole development process. Of course, this is easier said than done but integrating various competencies into the product development prepares the ground for a better balance and consequently more products. Databases, for instance are a good example of a tool that can...... the development process and diminish the risk of inventing sliced bread once again. Furthermore the databases may be used as a foundation for a more effective and frictionless communication across departments. The project has its starting point in case studies of three Danish food companies. A research group...

Structural integrity and its role in nuclear safety: recent UK advances in the development of high temperature design procedures

International Nuclear Information System (INIS)

Townley, C.H.A.

1996-01-01

This paper takes the liquid metal fast breeder reactor as an example and identifies those topics where research has had a role to play in providing improved design rules. Many of the previously adopted procedures contained large amounts of pessimism to allow for uncertainties in the prediction of long-term structural behaviour. The aim has therefore been to gain an improved physical insight into the phenomena which govern performance and to develope less restrictive procedures which, at the same time, guarantee the high standards of integrity which are required. (orig.)

The Challenges Of Integrating Population Issues Into Development ...

African Journals Online (AJOL)

Population dynamic is one of the prime factors for social, economic and technological change worldwide. As population size and composition change in an area, people have to adjust leading to innumerable alterations in the way society operates. The integration of population issues into development planning is crucial.

Can conservation and development really be integrated? | Sayer ...

African Journals Online (AJOL)

Most biodiversity conservation projects in poor tropical countries also aspire to alleviate the poverty of local people. The results of these integrated conservation and development projects have often been disappointing. This paper argues that it would be impossible for both practical and ethical reasons for conservation

Integrating Sustainability Education into International Marketing Curricula

Science.gov (United States)

Perera, Chamila Roshani; Hewege, Chandana Rathnasiri

2016-01-01

Purpose: The purpose of this study is to extend the current knowledge of curriculum developments in international business and marketing curricula. Integrating sustainability into business and marketing curricula of the universities are widely debated in previous literature. Sustainability is a global phenomenon; however, curriculum development…

An integrated infrastructure in support of software development

International Nuclear Information System (INIS)

Antonelli, S; Bencivenni, M; De Girolamo, D; Giacomini, F; Longo, S; Manzali, M; Veraldi, R; Zani, S

2014-01-01

This paper describes the design and the current state of implementation of an infrastructure made available to software developers within the Italian National Institute for Nuclear Physics (INFN) to support and facilitate their daily activity. The infrastructure integrates several tools, each providing a well-identified function: project management, version control system, continuous integration, dynamic provisioning of virtual machines, efficiency improvement, knowledge base. When applicable, access to the services is based on the INFN-wide Authentication and Authorization Infrastructure. The system is being installed and progressively made available to INFN users belonging to tens of sites and laboratories and will represent a solid foundation for the software development efforts of the many experiments and projects that see the involvement of the Institute. The infrastructure will be beneficial especially for small- and medium-size collaborations, which often cannot afford the resources, in particular in terms of know-how, needed to set up such services.

European Universities' Guidance on Research Integrity and Misconduct.

Science.gov (United States)

Aubert Bonn, Noémie; Godecharle, Simon; Dierickx, Kris

2017-02-01

Research integrity is imperative to good science. Nonetheless, many countries and institutions develop their own integrity guidance, thereby risking incompatibilities with guidance of collaborating institutions. We retrieved guidance for academic integrity and misconduct of 18 universities from 10 European countries and investigated accessibility, general content, principles endorsed, and definitions of misconduct. Accessibility and content differ substantially between institutions. There are general trends of common principles of integrity and definitions of misconduct, yet differences remain. Parallel with previous research, we distinguish different approaches in integrity guidance; one emphasizes broad values of integrity, and the other details negative behaviors of misconduct. We propose that a balance between both approaches is necessary to preserve trust, meaning, and realism of guidance on research integrity.

Arts Integration as Potentiality for Professional Development for School Teachers

DEFF Research Database (Denmark)

Jensen, Julie Borup

This paper investigates the potentialities for professional development, when teachers work with integration of arts and academic subjects in the classroom. The idea of integrating arts and academic subjects can be seen as a way of experimenting with teaching. Experiments in the classroom as a way...... of creating new knowledge about teaching is very closely linked to ideas from action research approaches to development of both new practices and new knowledge. Therefore, we will draw on concepts from action research theory to explore how teachers learn and at the same time develop new knowledge when......: Experience, Exploration, and Experimentation. In this way, the action research approach has the possibility of creating not only new practices, but also to develop new theoretic understanding of the learning processes involved in creating change in a living practice as classroom teaching. As an empirical...

Development of a Deterministic Optimization Model for Design of an Integrated Utility and Hydrogen Supply Network

International Nuclear Information System (INIS)

Hwangbo, Soonho; Lee, In-Beum; Han, Jeehoon

2014-01-01

Lots of networks are constructed in a large scale industrial complex. Each network meet their demands through production or transportation of materials which are needed to companies in a network. Network directly produces materials for satisfying demands in a company or purchase form outside due to demand uncertainty, financial factor, and so on. Especially utility network and hydrogen network are typical and major networks in a large scale industrial complex. Many studies have been done mainly with focusing on minimizing the total cost or optimizing the network structure. But, few research tries to make an integrated network model by connecting utility network and hydrogen network. In this study, deterministic mixed integer linear programming model is developed for integrating utility network and hydrogen network. Steam Methane Reforming process is necessary for combining two networks. After producing hydrogen from Steam-Methane Reforming process whose raw material is steam vents from utility network, produced hydrogen go into hydrogen network and fulfill own needs. Proposed model can suggest optimized case in integrated network model, optimized blueprint, and calculate optimal total cost. The capability of the proposed model is tested by applying it to Yeosu industrial complex in Korea. Yeosu industrial complex has the one of the biggest petrochemical complex and various papers are based in data of Yeosu industrial complex. From a case study, the integrated network model suggests more optimal conclusions compared with previous results obtained by individually researching utility network and hydrogen network

An Integrated Development Tool for a safety application using FBD language

Energy Technology Data Exchange (ETDEWEB)

Lee, Young Jun; Lee, Jang Soo; Lee, Dong Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

Regarding digitalizing the Nuclear Instrumentation and Control Systems, the application program responsible for the safety functions of Nuclear I and C Systems shall ensure the robustness of the safety function through development, testing, and validation roles for a life cycle process during software development. The importance of software in nuclear systems increases continuously. The integrated engineering tools to develop, test, and validate safety application programs require increasingly more complex parts among a number of components within nuclear digital I and C systems. This paper introduces the integrated engineering tool (SafeCASE-PLC) developed by our project. The SafeCASE-PLC is a kind of software engineering tool to develop, test, and validate the nuclear application program performed in an automatic controller

Development of integrative bioethics in the Mediterranean area of South-East Europe.

Science.gov (United States)

Kukoč, Mislav

2012-11-01

With regards to its origin, foundation and development, bioethics is a relatively new discipline, scientific and theoretical field, where different and even contradicting definition models and methodological patterns of its formation and application meet. In some philosophical orientations, bioethics is considered to be a sub-discipline of applied ethics as a traditional philosophical discipline. Yet in biomedical and other sciences, bioethics is designated as a specialist scientific discipline, or a sort of a new medical ethics. The concept of integrative bioethics as an interdisciplinary scholarly and pluriperspectivistic area goes beyond such one-sided determinations, both philosophical and scientistic, and intends to integrate the philosophical approach to bioethics with its particular scientific contents, as well as different cultural dimensions and perspectives. This concept of integrative bioethics has gradually developed at philosophical and interdisciplinary conferences and institutions on the "bioethical islands" of the Croatian Mediterranean. In this paper, the author follows the formation, development and prospects of integrative bioethics in the wider region of the Mediterranean and Southeast Europe.

Feasible reactor power cutback logic development for an integral reactor

International Nuclear Information System (INIS)

Han, Soon-Kyoo; Lee, Chung-Chan; Choi, Suhn; Kang, Han-Ok

2013-01-01

Major features of integral reactors that have been developed around the world recently are simplified operating systems and passive safety systems. Even though highly simplified control system and very reliable components are utilized in the integral reactor, the possibility of major component malfunction cannot be ruled out. So, feasible reactor power cutback logic is required to cope with the malfunction of components without inducing reactor trip. Simplified reactor power cutback logic has been developed on the basis of the real component data and operational parameters of plant in this study. Due to the relatively high rod worth of the integral reactor the control rod assembly drop method which had been adapted for large nuclear power plants was not desirable for reactor power cutback of the integral reactor. Instead another method, the control rod assembly control logic of reactor regulating system controls the control rod assembly movements, was chosen as an alternative. Sensitivity analyses and feasibility evaluations were performed for the selected method by varying the control rod assembly driving speed. In the results, sensitivity study showed that the performance goal of reactor power cutback system could be achieved with the limited range of control rod assembly driving speed. (orig.)

The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

Science.gov (United States)

McGhee, D. S.

2006-01-01

Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

Integrating Reading and Technology: The Development of "Pamanpintermu"

Science.gov (United States)

Arifani, Yudhi; Rosyid, Harunur

2016-01-01

Reading as one of English skills has paramount features in shaping EFL English competence. Referring to the importance for reading, it is inevitable that teaching method, assessments tools, reading material and activities have indispensable tasks to attain EFL learners' reading objectives. This study is intended to develop integrated reading…

Value-based integrated (renal) care: setting a development agenda for research and implementation strategies.

Science.gov (United States)

Valentijn, Pim P; Biermann, Claus; Bruijnzeels, Marc A

2016-08-02

Integrated care services are considered a vital strategy for improving the Triple Aim values for people with chronic kidney disease. However, a solid scholarly explanation of how to develop, implement and evaluate such value-based integrated renal care services is limited. The aim of this study was to develop a framework to identify the strategies and outcomes for the implementation of value-based integrated renal care. First, the theoretical foundations of the Rainbow Model of Integrated Care and the Triple Aim were united into one overarching framework through an iterative process of key-informant consultations. Second, a rapid review approach was conducted to identify the published research on integrated renal care, and the Cochrane Library, Medline, Scopus, and Business Source Premier databases were searched for pertinent articles published between 2000 and 2015. Based on the framework, a coding schema was developed to synthesis the included articles. The overarching framework distinguishes the integrated care domains: 1) type of integration, 2) enablers of integration and the interrelated outcome domains, 3) experience of care, 4) population health and 5) costs. The literature synthesis indicated that integrated renal care implementation strategies have particularly focused on micro clinical processes and physical outcomes, while little emphasis has been placed on meso organisational as well as macro system integration processes. In addition, evidence regarding patients' perceived outcomes and economic outcomes has been weak. These results underscore that the future challenge for researchers is to explore which integrated care implementation strategies achieve better health and improved experience of care at a lower cost within a specific context. For this purpose, this study's framework and evidence synthesis have set a developmental agenda for both integrated renal care practice and research. Accordingly, we plan further work to develop an implementation

Mixed Waste Integrated Program emerging technology development

International Nuclear Information System (INIS)

Berry, J.B.; Hart, P.W.

1994-01-01

The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m 3 of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development's Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW

Developing an integrated career and competency framework for diabetes nursing.

Science.gov (United States)

Davis, Ruth; Turner, Eileen; Hicks, Deborah; Tipson, Margaret

2008-01-01

To describe the development of an integrated career and competency framework for diabetes nursing. The UK Nursing and Midwifery Council provides a definition of competence, but the terminology used in relation to the subject is often ambiguous and confusing. These concepts are explored in relation to nursing practice and the different approaches to competency framework development are described. To work alongside the Royal College of Nursing (RCN) and Skills for Health competency initiatives, a Diabetes Nursing Strategy Group representing nurses working in diabetes care was formed to oversee the development of an integrated career and competency framework for diabetes nursing. At the outset, the design was guided by the RCN Practice Development Team and employed qualitative methodology including the modified Delphi and nominal group technique. A purposive sample of nurses representing all sectors and grades of staff involved in diabetes care was invited to workshops to undertake a values clarification exercise. Content analysis was performed to identify themes. Further workshops identified areas of specialist practice and competence statements were developed and refined in a series of consultations. Competence statements for a range of diabetes-related areas were produced for nurses at the levels of unregistered practitioners, competent nurses, experience/proficient nurses, senior practitioners/expert nurses and consultant nurses. The description of the process of developing of the integrated career and competency framework should help other groups going through the same process. Relevance to clinical practice. In addition to helping groups identify a formula for the development of a competency framework, the framework itself is designed to provide a basis for educational programmes, personal career development and a tool for managers managing career progression within diabetes nursing.

Integrated learning through student goal development.

Science.gov (United States)

Price, Deborah; Tschannen, Dana; Caylor, Shandra

2013-09-01

New strategies are emerging to promote structure and increase learning in the clinical setting. Nursing faculty designed a mechanism by which integrative learning and situated coaching could occur more readily in the clinical setting. The Clinical Goals Initiative was implemented for sophomore-, junior-, and senior-level students in their clinical practicums. Students developed weekly goals reflecting three domains of professional nursing practice. Goals were shared with faculty and staff nurse mentors at the beginning of the clinical day to help guide students and mentors with planning for learning experiences. After 6 weeks, faculty and students were surveyed to evaluate project effectiveness. Faculty indicated that goal development facilitated clinical learning by providing more student engagement, direction, and focus. Students reported that goal development allowed them to optimize clinical learning opportunities and track their growth and progress. Faculty and students indicated the goals promoted student self-learning, autonomy, and student communication with nurse mentors and faculty. Copyright 2013, SLACK Incorporated.

Recent developments in the path integral approach to anomalies

International Nuclear Information System (INIS)

Fujikawa, Kazuo.

1986-08-01

After a brief summary of the path integral approach to anomalous identities, some of the recent developments in this approach are discussed. The topics discussed include (i) Construction of the effective action by means of the covariant current, (ii) Gauss law constraint in anomalous gauge theories, (iii) Path integral approach to anomalies in superconformal transformations, (iv) Conformal and ghost number anomalies in string theory in analogy with the instanton calculation, (v) Covariant local Lorentz anomaly and its connection with the mathematical construction of the consistent anomaly. (author)

Integrated policy analysis of sustainable urban and transportation development

NARCIS (Netherlands)

Zhang, J.; Feng, T.; Fujiwara, A.; Fujiwara, A.; Zhang, Junyi

2013-01-01

Sustainable urban and transportation development needs to balance economic sustainability, environmental sustainability, and social equity. This study conducts integrated policy analyses by explicitly incorporating these sustainability goals and optimizing the performance of transportation networks.

Integrating ergonomics into the product development process

DEFF Research Database (Denmark)

Broberg, Ole

1997-01-01

and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

Integrated Child Development Services (ICDS): harbinger of safe motherhood and child development.

Science.gov (United States)

Lal, S

1993-01-01

Editorial comment was provided on the features that made the Integrated Child Development Services (ICDS) program in India unique and on whether or not the system could focus on younger age groups (e.g., 2-3 years of age). As part of a worldwide effort, India's ICDS program has been directed to human resource development. Over the past 17 years, the program has expanded to include almost 50% of the country's most vulnerable and deprived population. The focus on children aimed to improve their nutrition and health by reducing the incidence of morbidity, mortality, malnutrition, and school dropouts. The concern encompassed physical, social, and psychological development. The focus on mothers stressed enabling them to better care for the health and nutrition of their children. The program included prenatal care, safe delivery, and post natal concern for lactation, breast feeding, and physical growth monitoring in the early years. The program's unique features were its voluntary membership of community health workers, integrated services, and targeted coverage of economically weaker and deprived populations during critical child development periods. Indigenous Indian resources provided the primary financial support. Nation coverage was given for universal immunization, family welfare, child and maternal health, diarrheal disease control, vitamin A supplementation, and anemia screening and treatment. The multisectoral nature of the program has been realized at the village, sector, block, and district levels with linkages within Health, Education, and Social Welfare sectors, and with the Medical Colleges and Home Science Colleges. Feedback from operations research studies and other research activities was provided at the local program level, and interactions occurred between students in training programs and health care delivery systems. The program will be expanded to include the entire country. Health and nutrition education were considered the weakest part of ICDS

FOREN 2004. Sustainable Energy Development and European Integration

International Nuclear Information System (INIS)

Iancu Iulian

2004-01-01

The 7th Regional Energy Forum- FOREN 2004 with the main topic 'Sustainable Energy Development and European Integration' took place in Neptun-Olimp, on 13th to 17th June 2004. The event was organized by WEC Romanian National Committee, under the auspices of the World Energy Council (WEC). The event was accompanied by several related manifestation as: An up to date Technical Programme designed to explore key issues concerning the ability of the Romanian energy industry to integrate in the European Union; An Exhibition providing first hand access to service and equipment providers; A Partnership Programme, to present the achievements and developments of power companies in round tables, film projections, technical visits and advertising; Social events giving to participants the opportunity to establish direct connections with the Romanian colleagues. The Forum was open to members of the World Energy Council, energy industry leaders, government ministers and officials, heads of international organizations like: UNECE, EC, IEA, Eurelectric, IGU, EUROgas, USAID, academics, media, individual and corporate members interested in sustainable energy development. For further details concerning the agenda and registration. Forum 2004 was structured on five sections each containing a key issue a panel session, communication session and poster presentation on the following items: 1. Energy legislation and institutional framework; 2. The technological dimension of sustainable energy; 3. The ecological dimension of sustainable development; 4. The social dimension of sustainable development; 5. The power equipment manufacturing industry

Impact of informal institutions on the development integration processes

Directory of Open Access Journals (Sweden)

Sidorova Alexandra, M.

2015-06-01

Full Text Available The paper deals with the impact of informal institutions on the definition of the vector integration processes and the development of integration processes in the countries of the Customs Union and Ukraine. The degree of scientific development of the phenomenon in different economic schools is determined in this article. Economic mentality is a basic informal institutions, which determines the degree of effectiveness of the integration processes. This paper examines the nature, characteristics and effects of economic mentality on the economic activities of people. Ethnometrichal method allows to quantify the economic mentality that enables deeper understanding and analysis of the formation and functioning of political and economic system, especially business and management, establishing contacts with other cultures. It was measured modern Belarusian economic mentality based on international methodology Hofstede and compared with the economic mentality of Russia, Ukraine and Kazakhstan. With the help of cluster analysis congruence economic mentality of the Customs Union and Ukraine was determined. Economic mentality of these countries was also compared with the economic mentality of other countries in order to identify the main types of economic culture.

Development of FBR integrity system code. Basic concept

International Nuclear Information System (INIS)

Asayama, Tai

2001-05-01

For fast breeder reactors to be commercialized, they must be more reliable, safer, and at the same, economically competitive with future light water reactors. Innovation of elevated temperature structural design standard is necessary to achieve this goal. The most powerful way is to enlarge the scope of structural integrity code to cover items other than design evaluation that has been addressed in existing codes. Items that must be newly covered are prerequisites of design, fabrication, examination, operation and maintenance, etc. This allows designers to choose the most economical combination of design variations to achieve specific reliability that is needed for a particular component. Designing components by this concept, a cost-minimum design of a whole plant can be realized. By determining the reliability that must be achieved for a component by risk technologies, further economical improvement can be expected by avoiding excessive quality. Recognizing the necessity for the codes based on the new concept, the development of 'FBR integrity system code' began in 2000. Research and development will last 10 years. For this development, the basic logistics and system as well as technologies that materialize the concept are necessary. Original logistics and system must be developed, because no existing researches are available in and out of Japan. This reports presents the results of the work done in the first year regarding the basic idea, methodology, and structure of the code. (author)

Integrating management tools and concepts to develop an estuarine planning support system: A case study of the Humber Estuary, Eastern England.

Science.gov (United States)

Lonsdale, Jemma-Anne; Weston, Keith; Barnard, Steve; Boyes, Suzanne J; Elliott, Michael

2015-11-15

Estuaries are important because of their multiple uses and users which often makes them challenging to manage since management must strike a balance between the needs of users, the estuaries' ecological and economic value and the context of multiple legislative drivers. To facilitate management we have therefore developed an Estuarine Planning Support System (EPSS) framework using the Humber Estuary, Eastern England, as a case study which integrates the current legislation tools and concepts. This integrated EPSS framework is an improvement on previous approaches for assessing cumulative impacts as it takes into account legislative drivers, management tools and other mechanisms for controlling plans/projects specific to the estuary. It therefore enables managers and users to assess and address both the current state and the way in which a new industrial, port or urban development could impact an estuary in an accessible and understandable framework. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

Foundational development of an advanced nuclear reactor integrated safety code

International Nuclear Information System (INIS)

Clarno, Kevin; Lorber, Alfred Abraham; Pryor, Richard J.; Spotz, William F.; Schmidt, Rodney Cannon; Belcourt, Kenneth; Hooper, Russell Warren; Humphries, Larry LaRon

2010-01-01

This report describes the activities and results of a Sandia LDRD project whose objective was to develop and demonstrate foundational aspects of a next-generation nuclear reactor safety code that leverages advanced computational technology. The project scope was directed towards the systems-level modeling and simulation of an advanced, sodium cooled fast reactor, but the approach developed has a more general applicability. The major accomplishments of the LDRD are centered around the following two activities. (1) The development and testing of LIME, a Lightweight Integrating Multi-physics Environment for coupling codes that is designed to enable both 'legacy' and 'new' physics codes to be combined and strongly coupled using advanced nonlinear solution methods. (2) The development and initial demonstration of BRISC, a prototype next-generation nuclear reactor integrated safety code. BRISC leverages LIME to tightly couple the physics models in several different codes (written in a variety of languages) into one integrated package for simulating accident scenarios in a liquid sodium cooled 'burner' nuclear reactor. Other activities and accomplishments of the LDRD include (a) further development, application and demonstration of the 'non-linear elimination' strategy to enable physics codes that do not provide residuals to be incorporated into LIME, (b) significant extensions of the RIO CFD code capabilities, (c) complex 3D solid modeling and meshing of major fast reactor components and regions, and (d) an approach for multi-physics coupling across non-conformal mesh interfaces.

Foundational development of an advanced nuclear reactor integrated safety code.

Energy Technology Data Exchange (ETDEWEB)

Clarno, Kevin (Oak Ridge National Laboratory, Oak Ridge, TN); Lorber, Alfred Abraham; Pryor, Richard J.; Spotz, William F.; Schmidt, Rodney Cannon; Belcourt, Kenneth (Ktech Corporation, Albuquerque, NM); Hooper, Russell Warren; Humphries, Larry LaRon

2010-02-01

This report describes the activities and results of a Sandia LDRD project whose objective was to develop and demonstrate foundational aspects of a next-generation nuclear reactor safety code that leverages advanced computational technology. The project scope was directed towards the systems-level modeling and simulation of an advanced, sodium cooled fast reactor, but the approach developed has a more general applicability. The major accomplishments of the LDRD are centered around the following two activities. (1) The development and testing of LIME, a Lightweight Integrating Multi-physics Environment for coupling codes that is designed to enable both 'legacy' and 'new' physics codes to be combined and strongly coupled using advanced nonlinear solution methods. (2) The development and initial demonstration of BRISC, a prototype next-generation nuclear reactor integrated safety code. BRISC leverages LIME to tightly couple the physics models in several different codes (written in a variety of languages) into one integrated package for simulating accident scenarios in a liquid sodium cooled 'burner' nuclear reactor. Other activities and accomplishments of the LDRD include (a) further development, application and demonstration of the 'non-linear elimination' strategy to enable physics codes that do not provide residuals to be incorporated into LIME, (b) significant extensions of the RIO CFD code capabilities, (c) complex 3D solid modeling and meshing of major fast reactor components and regions, and (d) an approach for multi-physics coupling across non-conformal mesh interfaces.

Prototype development and demonstration for integrated dynamic transit operations.

Science.gov (United States)

2016-01-01

This document serves as the Final Report specific to the Integrated Dynamic Transit Operations (IDTO) Prototype Development and Deployment Project, hereafter referred to as IDTO Prototype Deployment or IDTO PD project. This project was performed unde...

INTEGRATION OF SUSTAINABLE DEVELOPMENT AND QUALITY ON ORGANISATIONAL AND REGIONAL LEVEL

Directory of Open Access Journals (Sweden)

Aleksandra Kokic Arsic

2016-09-01

Full Text Available Subject of the article is an integration of quality management and sustainable development, with the basis of considerations of sustainable development and the structure of the key quality factors pointed to the possibility of achieving synergy of action on the most important variables, as well as the established model of integration of these two complex concepts. Areas of our study were 83 organizations in the region of Central Serbia. The study was based on questionnaires which contained 50 questions about the level of quality and sustainable development in the companies surveyed. Results of research highlights the most influenced variables in condition of constraints related to transition economy characteristics.

Research and Development Needs for Building-Integrated Solar Technologies

Energy Technology Data Exchange (ETDEWEB)

none,

2014-01-01

The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

Partnership for Self-Reliant Change: Institute for Integrated Rural Development.

Science.gov (United States)

Dancey, John

1994-01-01

The Institute for Integrated Rural Development in the Maharashtra State of India seeks to break the cycle of poverty through sustainable rural development. It works closely with rural women on health and nutrition education and in other community partnerships based on horizontal structures. (SK)

Stock market development and integration in SADC (Southern African Development Community

Directory of Open Access Journals (Sweden)

Sunil K. Bundoo

2017-06-01

Full Text Available The paper analyses the extent of stock market integration in SADC by first analyzing beta and sigma convergence and then using cointegration analysis. The US market and the SSA index were used as benchmarks. The sample period was from January 1999 to December 2011 using daily market index data. We observe beta convergence but not sigma convergence; though the sigma values are falling for most of the SADC countries. Under normal conditions, no cointegrating vector was identified when using the US market as benchmark. When using the SSA index as benchmark one cointegrating vector was identified. The paper also takes stock of the extent of software and hardware stock market integration in SADC. The SADC stock exchanges must work towards greater integration so that they can attract more sustained portfolio flows rather than volatile portfolio flows and also greater FDI flows which are much needed for the financial and economic development of the SADC countries. We also need to consolidate and reduce the number of exchanges with the view to improve market capitalization, liquidity, market infrastructure, governance amongst others but most importantly to increase the visibility, robustness and reputation of SADC stock markets at the international level.

Mixed Waste Integrated Program emerging technology development

Energy Technology Data Exchange (ETDEWEB)

Berry, J.B. [Oak Ridge National Lab., TN (United States); Hart, P.W. [USDOE, Washington, DC (United States)

1994-06-01

The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m{sup 3} of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development`s Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW.

Integrated waste and water management system

Science.gov (United States)

Murray, R. W.; Sauer, R. L.

1986-01-01

The performance requirements of the NASA Space Station have prompted a reexamination of a previously developed integrated waste and water management system that used distillation and catalytic oxydation to purify waste water, and microbial digestion and incineration for waste solids disposal. This system successfully operated continuously for 206 days, for a 4-man equivalent load of urine, feces, wash water, condensate, and trash. Attention is given to synergisms that could be established with other life support systems, in the cases of thermal integration, design commonality, and novel technologies.

Integral or integrated marketing

Directory of Open Access Journals (Sweden)

Davčik Nebojša

2006-01-01

Full Text Available Marketing theorists and experts try to develop business efficient organization and to get marketing performance at higher, business integrated level since its earliest beginnings. The core issue in this paperwork is the dialectic and practical approach dilemma should we develop integrated or integral marketing approach in the organization. The presented company cases as well as dialectic and functional explanations of this dilemma clearly shows that integrated marketing is narrower approach than integral marketing if we take as focal point new, unique and completed entity. In the integration the essence is in getting different parts together, which do not have to make necessary the new entity. The key elements in the definition of the integral marketing are necessity and holistic, e.g. necessity to develop new, holistic entity.

Late development of cue integration is linked to sensory fusion in cortex.

Science.gov (United States)

Dekker, Tessa M; Ban, Hiroshi; van der Velde, Bauke; Sereno, Martin I; Welchman, Andrew E; Nardini, Marko

2015-11-02

Adults optimize perceptual judgements by integrating different types of sensory information [1, 2]. This engages specialized neural circuits that fuse signals from the same [3-5] or different [6] modalities. Whereas young children can use sensory cues independently, adult-like precision gains from cue combination only emerge around ages 10 to 11 years [7-9]. Why does it take so long to make best use of sensory information? Existing data cannot distinguish whether this (1) reflects surprisingly late changes in sensory processing (sensory integration mechanisms in the brain are still developing) or (2) depends on post-perceptual changes (integration in sensory cortex is adult-like, but higher-level decision processes do not access the information) [10]. We tested visual depth cue integration in the developing brain to distinguish these possibilities. We presented children aged 6-12 years with displays depicting depth from binocular disparity and relative motion and made measurements using psychophysics, retinotopic mapping, and pattern classification fMRI. Older children (>10.5 years) showed clear evidence for sensory fusion in V3B, a visual area thought to integrate depth cues in the adult brain [3-5]. By contrast, in younger children (develop. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

A Roadmap to Continuous Integration for ATLAS Software Development

Science.gov (United States)

Elmsheuser, J.; Krasznahorkay, A.; Obreshkov, E.; Undrus, A.; ATLAS Collaboration

2017-10-01

The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million lines of C++ and 1.4 million lines of python code. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This paper describes the CI incorporation program for the ATLAS software infrastructure. It brings modern open source tools such as Jenkins and GitLab into the ATLAS Nightly System, rationalizes hardware resource allocation and administrative operations, provides improved feedback and means to fix broken builds promptly for developers. Once adopted, ATLAS CI practices will improve and accelerate innovation cycles and result in increased confidence in new software deployments. The paper reports the status of Jenkins integration with the ATLAS Nightly System as well as short and long term plans for the incorporation of CI practices.

Mixed signal custom integrated circuit development for physics instrumentation

International Nuclear Information System (INIS)

Britton, C.L. Jr.; Bryan, W.L.; Emery, M.S.

1998-01-01

The Monolithic Systems Development Group at the Oak Ridge National Laboratory has been greatly involved in custom mixed-mode integrated circuit development for the PHENIX detector at the Relativistic Heavy Ion collider (RHIC) at Brookhaven National Laboratory and position-sensitive germanium spectrometer front-ends for the Naval Research Laboratory (NRL). This paper will outline the work done for both PHENIX and the Naval Research Laboratory in the area of full-custom, mixed-signal CMOS integrated electronics. This paper presents the architectures chosen for the various PHENIX detectors which include position-sensitive silicon, capacitive pixel, and phototube detectors, and performance results for the subsystems as well as a system description of the NRL germanium strip system and its performance. The performance of the custom preamplifiers, discriminators, analog memories, analog-digital converters, and control circuitry for all systems will be presented

Mixed signal custom integrated circuit development for physics instrumentation

Energy Technology Data Exchange (ETDEWEB)

Britton, C.L. Jr.; Bryan, W.L.; Emery, M.S. [and others

1998-10-01

The Monolithic Systems Development Group at the Oak Ridge National Laboratory has been greatly involved in custom mixed-mode integrated circuit development for the PHENIX detector at the Relativistic Heavy Ion collider (RHIC) at Brookhaven National Laboratory and position-sensitive germanium spectrometer front-ends for the Naval Research Laboratory (NRL). This paper will outline the work done for both PHENIX and the Naval Research Laboratory in the area of full-custom, mixed-signal CMOS integrated electronics. This paper presents the architectures chosen for the various PHENIX detectors which include position-sensitive silicon, capacitive pixel, and phototube detectors, and performance results for the subsystems as well as a system description of the NRL germanium strip system and its performance. The performance of the custom preamplifiers, discriminators, analog memories, analog-digital converters, and control circuitry for all systems will be presented.

Development of safety analysis technology for integral reactor; evaluation on safety concerns of integral reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Hee Chul; Kim, Woong Sik; Lee, J. H. [Korea Institute of Nuclear Safety, Taejeon (Korea)

2002-03-01

The Nuclear Desalination Plant (NDP) is being developed to produce electricity and fresh water, and is expected to locate near population zone. In the aspect of safety, it is required to protect the public and environment from the possible releases of fission products and to prevent the fresh water from the contamination of radioactivity. Thus, in this study, the safety characteristics of the integral reactor adopting passive and inherent safety features significantly different from existing nuclear power plants were investigated. Also, safety requirements applicable to the NDP were analyzed based on the regulatory requirements for current light water reactor and advanced reactor designs, and user requirements for small-medium size reactors. Based on these analyses, some safety concerns to be considered in the design stage have been identified and discussed. They include the use of proven technology for new safety features, systematic event classification and selection, strengthening containment function, and the safety impacts on desalination-related systems. The study presents the general safety requirements applicable to licensing of an integral reactor and suggests additional regulatory requirements, which need to be developed, based on the direction to resolution of the safety concerns. The efforts to identify and technically resolve the safety concerns in the design stage will provide the early confidence of SMART safety and the technical basis to evaluate the safety to designers and reviewers in the future. Suggestion on the development of additional regulatory requirements will contribute for the regulator to taking actions for licensing of an integral reactor. 66 refs., 5 figs., 24 tabs. (Author)

An integration programme of poverty alleviation and development with family planning.

Science.gov (United States)

1997-04-01

The State Council (the central government) recently issued a Circular for Speeding Up the Integration of Poverty Alleviation and Development with the Family Planning Programme during the Ninth Five-year Plan (1996-2000). The Circular was jointly submitted by the State Family Planning Commission and the Leading Group for Poverty Alleviation and Development. The document sets the two major tasks as solving the basic needs for food and clothing of the rural destitute and the control of over-rapid growth of China's population. Practice indicates that a close Integration Programme is the best way for impoverished farmers to alleviate poverty and become better-off. Overpopulation and low educational attainments and poor health quality of population in backward areas are the major factors retarding socioeconomic development. Therefore, it is inevitable to integrate poverty alleviation with family planning. It is a path with Chinese characteristics for a balanced population and sustainable socioeconomic development. The targets of the Integration Programme are as follows: The first is that preferential policies should be worked out to guarantee family planning acceptors, especially households with an only daughter or two daughters, are the first to be helped to eradicate poverty and become well-off. They should become good examples for other rural poor in practicing fewer but healthier births, and generating family income. The second target is that the population plans for the poor counties identified by the central government and provincial governments must be fulfilled. This should contribute to breaking the vicious circle of poverty leading to more children, in turn generating more poverty. The circular demands that more efforts should focus on the training of cadres for the Integrated Programme and on services for poor family planning acceptors. full text

The Importance of Integration of Stakeholder Views in Core Outcome Set Development: Otitis Media with Effusion in Children with Cleft Palate

Science.gov (United States)

Harman, Nicola L.; Bruce, Iain A.; Kirkham, Jamie J.; Tierney, Stephanie; Callery, Peter; O'Brien, Kevin; Williamson, Paula R.

2015-01-01

Background Approximately 75% of children with cleft palate (CP) have Otitis Media with Effusion (OME) histories. Evidence for the effective management of OME in these children is lacking. The inconsistency in outcome measurement in previous studies has led to a call for the development of a Core Outcome Set (COS). Despite the increase in the number of published COS, involvement of patients in the COS development process, and methods to integrate the views of patients and health professionals, to date have been limited. Methods and Findings A list of outcomes measured in previous research was identified through reviewing the literature. Opinion on the importance of each of these outcomes was then sought from key stakeholders: Ear, Nose and Throat (ENT) surgeons, audiologists, cleft surgeons, speech and language therapists, specialist cleft nurses, psychologists, parents and children. The opinion of health professionals was sought in a three round Delphi survey where participants were asked to score each outcome using a bespoke online system. Parents and children were also asked to score outcomes in a survey and provided an in-depth insight into having OME through semi-structured interviews. The results of the Delphi survey, interviews and parent/patient survey were brought together in a final consensus meeting with representation from all stakeholders. A final set of eleven outcomes reached the definition of “consensus in” to form the recommended COS: hearing; chronic otitis media (COM); OME; receptive language skills; speech development; psycho social development; acute otitis media (AOM); cholesteatoma; side effects of treatment; listening skills; otalgia. Conclusions We have produced a recommendation about the outcomes that should be measured, as a minimum, in studies of the management of OME in children with CP. The development process included input from key stakeholders and used novel methodology to integrate the opinion of healthcare professionals

The Importance of Integration of Stakeholder Views in Core Outcome Set Development: Otitis Media with Effusion in Children with Cleft Palate.

Science.gov (United States)

Harman, Nicola L; Bruce, Iain A; Kirkham, Jamie J; Tierney, Stephanie; Callery, Peter; O'Brien, Kevin; Bennett, Alex M D; Chorbachi, Raouf; Hall, Per N; Harding-Bell, Anne; Parfect, Victoria H; Rumsey, Nichola; Sell, Debbie; Sharma, Ravi; Williamson, Paula R

2015-01-01

Approximately 75% of children with cleft palate (CP) have Otitis Media with Effusion (OME) histories. Evidence for the effective management of OME in these children is lacking. The inconsistency in outcome measurement in previous studies has led to a call for the development of a Core Outcome Set (COS). Despite the increase in the number of published COS, involvement of patients in the COS development process, and methods to integrate the views of patients and health professionals, to date have been limited. A list of outcomes measured in previous research was identified through reviewing the literature. Opinion on the importance of each of these outcomes was then sought from key stakeholders: Ear, Nose and Throat (ENT) surgeons, audiologists, cleft surgeons, speech and language therapists, specialist cleft nurses, psychologists, parents and children. The opinion of health professionals was sought in a three round Delphi survey where participants were asked to score each outcome using a bespoke online system. Parents and children were also asked to score outcomes in a survey and provided an in-depth insight into having OME through semi-structured interviews. The results of the Delphi survey, interviews and parent/patient survey were brought together in a final consensus meeting with representation from all stakeholders. A final set of eleven outcomes reached the definition of "consensus in" to form the recommended COS: hearing; chronic otitis media (COM); OME; receptive language skills; speech development; psycho social development; acute otitis media (AOM); cholesteatoma; side effects of treatment; listening skills; otalgia. We have produced a recommendation about the outcomes that should be measured, as a minimum, in studies of the management of OME in children with CP. The development process included input from key stakeholders and used novel methodology to integrate the opinion of healthcare professionals, parents and children.

The Importance of Integration of Stakeholder Views in Core Outcome Set Development: Otitis Media with Effusion in Children with Cleft Palate.

Directory of Open Access Journals (Sweden)

Nicola L Harman

Full Text Available Approximately 75% of children with cleft palate (CP have Otitis Media with Effusion (OME histories. Evidence for the effective management of OME in these children is lacking. The inconsistency in outcome measurement in previous studies has led to a call for the development of a Core Outcome Set (COS. Despite the increase in the number of published COS, involvement of patients in the COS development process, and methods to integrate the views of patients and health professionals, to date have been limited.A list of outcomes measured in previous research was identified through reviewing the literature. Opinion on the importance of each of these outcomes was then sought from key stakeholders: Ear, Nose and Throat (ENT surgeons, audiologists, cleft surgeons, speech and language therapists, specialist cleft nurses, psychologists, parents and children. The opinion of health professionals was sought in a three round Delphi survey where participants were asked to score each outcome using a bespoke online system. Parents and children were also asked to score outcomes in a survey and provided an in-depth insight into having OME through semi-structured interviews. The results of the Delphi survey, interviews and parent/patient survey were brought together in a final consensus meeting with representation from all stakeholders. A final set of eleven outcomes reached the definition of "consensus in" to form the recommended COS: hearing; chronic otitis media (COM; OME; receptive language skills; speech development; psycho social development; acute otitis media (AOM; cholesteatoma; side effects of treatment; listening skills; otalgia.We have produced a recommendation about the outcomes that should be measured, as a minimum, in studies of the management of OME in children with CP. The development process included input from key stakeholders and used novel methodology to integrate the opinion of healthcare professionals, parents and children.

Development of ADINA-J-integral code

International Nuclear Information System (INIS)

Kurihara, Ryoichi

1988-07-01

A general purpose finite element program ADINA (Automatic Dynamic Incremental Nonlinear Analysis), which was developed by Bathe et al., was revised to be able to calculate the J- and J-integral. This report introduced the numerical method to add this capability to the code, and the evaluation of the revised ADINA-J code by using a few of examples of the J estimation model, i.e. a compact tension specimen, a center cracked panel subjected to dynamic load, and a thick shell cylinder having inner axial crack subjected to thermal load. The evaluation testified the function of the revised code. (author)

Toward an Integrative Science of Life-Span Development and Aging

Science.gov (United States)

Piccinin, Andrea M.

2010-01-01

The study of aging demands an integrative life-span developmental framework, involving interdisciplinary collaborations and multiple methodological approaches for understanding how and why individuals change, in both normative and idiosyncratic ways. We highlight and summarize some of the issues encountered when conducting integrative research for understanding aging-related change, including, the integration of results across different levels of analysis; the integration of theory, design, and analysis; and the synthesis of results across studies of aging. We emphasize the necessity of longitudinal designs for understanding development and aging and discuss methodological issues that should be considered for achieving reproducible research on within-person processes. It will be important that current and future studies permit opportunities for quantitative comparison across populations given the extent to which historical shifts and cultural differences influence life-span processes and aging-related outcomes. PMID:20237144

Integrating Professional Development across the Curriculum: An Effectiveness Study

Science.gov (United States)

Ciarocco, Natalie J.; Dinella, Lisa M.; Hatchard, Christine J.; Valosin, Jayde

2016-01-01

The current study empirically tested the effectiveness of a modular approach to integrating professional development across an undergraduate psychology curriculum. Researchers conducted a two-group, between-subjects experiment on 269 undergraduate psychology students assessing perceptions of professional preparedness and learning. Analysis…

Development of Spreadsheet-Based Integrated Transaction Processing Systems and Financial Reporting Systems

Science.gov (United States)

Ariana, I. M.; Bagiada, I. M.

2018-01-01

Development of spreadsheet-based integrated transaction processing systems and financial reporting systems is intended to optimize the capabilities of spreadsheet in accounting data processing. The purpose of this study are: 1) to describe the spreadsheet-based integrated transaction processing systems and financial reporting systems; 2) to test its technical and operational feasibility. This study type is research and development. The main steps of study are: 1) needs analysis (need assessment); 2) developing spreadsheet-based integrated transaction processing systems and financial reporting systems; and 3) testing the feasibility of spreadsheet-based integrated transaction processing systems and financial reporting systems. The technical feasibility include the ability of hardware and operating systems to respond the application of accounting, simplicity and ease of use. Operational feasibility include the ability of users using accounting applications, the ability of accounting applications to produce information, and control applications of the accounting applications. The instrument used to assess the technical and operational feasibility of the systems is the expert perception questionnaire. The instrument uses 4 Likert scale, from 1 (strongly disagree) to 4 (strongly agree). Data were analyzed using percentage analysis by comparing the number of answers within one (1) item by the number of ideal answer within one (1) item. Spreadsheet-based integrated transaction processing systems and financial reporting systems integrate sales, purchases, and cash transaction processing systems to produce financial reports (statement of profit or loss and other comprehensive income, statement of changes in equity, statement of financial position, and statement of cash flows) and other reports. Spreadsheet-based integrated transaction processing systems and financial reporting systems is feasible from the technical aspects (87.50%) and operational aspects (84.17%).

Development of a multiple-gene-loading method by combining multi-integration system-equipped mouse artificial chromosome vector and CRISPR-Cas9.

Directory of Open Access Journals (Sweden)

Kazuhisa Honma

Full Text Available Mouse artificial chromosome (MAC vectors have several advantages as gene delivery vectors, such as stable and independent maintenance in host cells without integration, transferability from donor cells to recipient cells via microcell-mediated chromosome transfer (MMCT, and the potential for loading a megabase-sized DNA fragment. Previously, a MAC containing a multi-integrase platform (MI-MAC was developed to facilitate the transfer of multiple genes into desired cells. Although the MI system can theoretically hold five gene-loading vectors (GLVs, there are a limited number of drugs available for the selection of multiple-GLV integration. To overcome this issue, we attempted to knock out and reuse drug resistance genes (DRGs using the CRISPR-Cas9 system. In this study, we developed new methods for multiple-GLV integration. As a proof of concept, we introduced five GLVs in the MI-MAC by these methods, in which each GLV contained a gene encoding a fluorescent or luminescent protein (EGFP, mCherry, BFP, Eluc, and Cluc. Genes of interest (GOI on the MI-MAC were expressed stably and functionally without silencing in the host cells. Furthermore, the MI-MAC carrying five GLVs was transferred to other cells by MMCT, and the resultant recipient cells exhibited all five fluorescence/luminescence signals. Thus, the MI-MAC was successfully used as a multiple-GLV integration vector using the CRISPR-Cas9 system. The MI-MAC employing these methods may resolve bottlenecks in developing multiple-gene humanized models, multiple-gene monitoring models, disease models, reprogramming, and inducible gene expression systems.

Grid integration impacts on wind turbine design and development

DEFF Research Database (Denmark)

Hansen, Anca Daniela; Cutululis, Nicolaos Antonio; Sørensen, Poul Ejnar

2009-01-01

This paper presents an overall perspective on contemporary issues like wind power plants and grid integration. The purpose is to present and discuss the impacts of emerging new grid connection requirements on modern wind turbines. The grid integration issue has caused several new challenges......, the grid integration aspect has also an effect on wind turbines' role in the power system, on wind turbine technologies' survival on the market, as well as on the wind turbines' loads. Over the last years, it became obviously, that there it is an increasing need for design and research of wind turbines...... to the wind turbine design and development. The survival of different wind turbine concepts and controls is strongly conditioned by their ability to comply with stringent grid connection requirements, imposed by utility companies. Beside its impact on the mechanical design and control of wind turbines...

The Neoindustrial Principles for the Development of Integration Relations in the Agrarian Sector of Economy

Directory of Open Access Journals (Sweden)

Hutorov Andrii O.

2017-08-01

Full Text Available The article is aimed at elaborating the neoindustrial principles for the development of integration relations in the agrarian sector of economy. It has been shown that the engine of sectoral development and economic growth in the context of neoliberal globalization are the integration relations formed by the product principle and intrinsically linked to the neoindustrial transformation of the agro-industrial potential. The article explores the lack of options when choosing a national model for the sectoral development of economy: vertical integration of advanced playback, neoindustrialization, and economic security. It has been proven that the mutual relationship between the socio-economic formations and the strategies for integration interaction is organic. The replacement of the functional target setting of economic system at all levels of the hierarchy from the maximum profit to the maximum of the cumulative newly created (added value has been substantiated. A conceptual model for the development of the agrarian sector through integration and neoindustrialization has been accomplished, as well as the principles of strategic management of the system of integration relations have been elaborated. The main forms of implementation of the integration relations with the centralized and decentralized models of neoindustrial development of the agrarian sector have been defined.

COLLECTIVE PROFESSIONAL DEVELOPMENT FOR THE INTEGRATION OF ICT IN HIGHER EDUCATION

DEFF Research Database (Denmark)

Castro Guzman, Willy

integration, and the teacher professional development as means to promote adoption. With the recognition of the potential of ICT in education, the study reflects the appropriateness of the dominant traditional approach to the first and second-order barriers to technology and attempts to overcome......In this thesis, I explore, analyse and reflect on the individual practice of adoption and the collective practice of integration of technology in teaching and learning in a Higher Education Institution. The study addresses the connections between ICT adoption in Education, the barriers of ICT...... the tradition of Cultural-Historical Activity Theory and brings significant changes in comparison with more traditional approaches in professional development to ICT adoption. The results of the intervention supports the idea of the need for changes in professional development to develop the professors’ agency...

Design and Development of an Integrated Workstation Automation Hub

Energy Technology Data Exchange (ETDEWEB)

Weber, Andrew; Ghatikar, Girish; Sartor, Dale; Lanzisera, Steven

2015-03-30

Miscellaneous Electronic Loads (MELs) account for one third of all electricity consumption in U.S. commercial buildings, and are drivers for a significant energy use in India. Many of the MEL-specific plug-load devices are concentrated at workstations in offices. The use of intelligence, and integrated controls and communications at the workstation for an Office Automation Hub – offers the opportunity to improve both energy efficiency and occupant comfort, along with services for Smart Grid operations. Software and hardware solutions are available from a wide array of vendors for the different components, but an integrated system with interoperable communications is yet to be developed and deployed. In this study, we propose system- and component-level specifications for the Office Automation Hub, their functions, and a prioritized list for the design of a proof-of-concept system. Leveraging the strength of both the U.S. and India technology sectors, this specification serves as a guide for researchers and industry in both countries to support the development, testing, and evaluation of a prototype product. Further evaluation of such integrated technologies for performance and cost is necessary to identify the potential to reduce energy consumptions in MELs and to improve occupant comfort.

Concept of development of integrated computer - based control system for 'Ukryttia' object

International Nuclear Information System (INIS)

Buyal'skij, V.M.; Maslov, V.P.

2003-01-01

The structural concept of Chernobyl NPP 'Ukryttia' Object's integrated computer - based control system development is presented on the basis of general concept of integrated Computer - based Control System (CCS) design process for organizing and technical management subjects.The concept is aimed at state-of-the-art architectural design technique application and allows using modern computer-aided facilities for functional model,information (logical and physical) models development,as well as for system object model under design

Space station operations task force. Panel 3 report: User development and integration

Science.gov (United States)

1987-01-01

The User Development and Integration Panel of the Space Station Operations Task Force was chartered to develop concepts relating to the operations of the Space Station manned base and the platforms, user accommodation and integration activities. The needs of the user community are addressed in the context with the mature operations phase of the Space Station. Issues addressed include space station pricing options, marketing strategies, payload selection and resource allocation options, and manifesting techniques.

Integrated design optimization research and development in an industrial environment

Science.gov (United States)

Kumar, V.; German, Marjorie D.; Lee, S.-J.

1989-01-01

An overview is given of a design optimization project that is in progress at the GE Research and Development Center for the past few years. The objective of this project is to develop a methodology and a software system for design automation and optimization of structural/mechanical components and systems. The effort focuses on research and development issues and also on optimization applications that can be related to real-life industrial design problems. The overall technical approach is based on integration of numerical optimization techniques, finite element methods, CAE and software engineering, and artificial intelligence/expert systems (AI/ES) concepts. The role of each of these engineering technologies in the development of a unified design methodology is illustrated. A software system DESIGN-OPT has been developed for both size and shape optimization of structural components subjected to static as well as dynamic loadings. By integrating this software with an automatic mesh generator, a geometric modeler and an attribute specification computer code, a software module SHAPE-OPT has been developed for shape optimization. Details of these software packages together with their applications to some 2- and 3-dimensional design problems are described.

Integrating Early Child Development and Violence Prevention Programs: A Systematic Review

Science.gov (United States)

Efevbera, Yvette; McCoy, Dana C.; Wuermli, Alice J.; Betancourt, Theresa S.

2018-01-01

Limited evidence describes promoting development and reducing violence in low- and middle-income countries (LMICs), a missed opportunity to protect children and promote development and human capital. This study presents a systematic literature review of integrated early childhood development plus violence prevention (ECD+VP) interventions in…

Integration into What? Reflections on Development Planning for Women.

Science.gov (United States)

Boulding, Elise

1980-01-01

Integration of women into the existing international economic and technological order promises only further loss of autonomy and increased marginalization. Women's groups should explore human-centered development which will generate new social structures and new approaches to human productivity and welfare. (SK)

Analyzing Developing Country Market Integration using Incomplete Price Data and Cluster Analysis

NARCIS (Netherlands)

Ansah, I.G.; Gardebroek, Koos; Ihle, R.; Jaletac, M.

2015-01-01

Recent global food price developments have spurred renewed interest in analyzing integration of local markets to global markets. A popular approach to quantify market integration is cointegration analysis. However, local market price data often has missing values, outliers, or short and incomplete

A roadmap to continuous integration for ATLAS software development

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00132984; The ATLAS collaboration; Elmsheuser, Johannes; Obreshkov, Emil; Krasznahorkay, Attila

2017-01-01

The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million C++ and 1.4 million python lines. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This paper describes the CI ...

A Roadmap to Continuous Integration for ATLAS Software Development

CERN Document Server

Elmsheuser, Johannes; The ATLAS collaboration; Obreshkov, Emil; Undrus, Alexander

2016-01-01

The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million C++ and 1.4 million python lines. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This presentation describes t...

Ten Items of Integrated Technology Developed by CNPC

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

@@ The technological work of China National Petroleum Corporation (CNPC) was based on the company's general development strategy to become a multinational giant with international competitiveness during the 10th FiveYear Plan Period (2001-2005). The technological efforts were focused on strengthening strategic management of technology to identify the technological development targets, optimizing allocation of technological resources and increasing technological investment to highlight creation of key technology. Aiming at the important and key technologies needed for main business development,CNPC launched 15 technological projects at the State level with a 100 percent completion rate and 379 other projects at the corporate level with a 92.8 percent completion rate. With a number of high-level results achieved, CNPC has developed 10 items of integrated technology.

Increasing quality and managing complexity in neuroinformatics software development with continuous integration

Directory of Open Access Journals (Sweden)

Yury V. Zaytsev

2013-01-01

Full Text Available High quality neuroscience research requires accurate, reliable and well maintained neuroinformatics applications. As software projects become larger, offering more functionality and developing a denser web of interdependence between their component parts, we need more sophisticated methods to manage their complexity. If complexity is allowed to get out of hand, either the quality of the software or the speed of development suffer, and in many cases both. To address this issue, here we develop a scalable, low-cost and open source solution for continuous integration (CI, a technique which ensures the quality of changes to the code base during the development procedure, rather than relying on a pre-release integration phase. We demonstrate that a CI based workflow, due to rapid feedback about code integration problems and tracking of code health measures, enabled substantial increases in productivity for a major neuroinformatics project and additional benefits for three further projects. Beyond the scope of the current study, we identify multiple areas in which CI can be employed to further increase the quality of neuroinformatics projects by improving development practices and incorporating appropriate development tools. Finally, we discuss what measures can be taken to lower the barrier for developers of neuroinformatics applications to adopt this useful technique.

Increasing quality and managing complexity in neuroinformatics software development with continuous integration.

Science.gov (United States)

Zaytsev, Yury V; Morrison, Abigail

2012-01-01

High quality neuroscience research requires accurate, reliable and well maintained neuroinformatics applications. As software projects become larger, offering more functionality and developing a denser web of interdependence between their component parts, we need more sophisticated methods to manage their complexity. If complexity is allowed to get out of hand, either the quality of the software or the speed of development suffer, and in many cases both. To address this issue, here we develop a scalable, low-cost and open source solution for continuous integration (CI), a technique which ensures the quality of changes to the code base during the development procedure, rather than relying on a pre-release integration phase. We demonstrate that a CI-based workflow, due to rapid feedback about code integration problems and tracking of code health measures, enabled substantial increases in productivity for a major neuroinformatics project and additional benefits for three further projects. Beyond the scope of the current study, we identify multiple areas in which CI can be employed to further increase the quality of neuroinformatics projects by improving development practices and incorporating appropriate development tools. Finally, we discuss what measures can be taken to lower the barrier for developers of neuroinformatics applications to adopt this useful technique.

Development of an alternating integrator for magnetic measurements for experimental advanced superconducting tokamak

Energy Technology Data Exchange (ETDEWEB)

Liu, D. M., E-mail: dmliu@live.cn; Zhao, W. Z.; He, Y. G.; Chen, B. [School of Electrical Engineering and Automation, Hefei University of Technology, Hefei 230009 (China); Wan, B. N.; Shen, B.; Huang, J.; Liu, H. Q. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

2014-11-15

A high-performance integrator is one of the key electronic devices for reliably controlling plasma in the experimental advanced superconducting tokamak for long pulse operation. We once designed an integrator system of real-time drift compensation, which has a low integration drift. However, it is not feasible for really continuous operations due to capacitive leakage error and nonlinearity error. To solve the above-mentioned problems, this paper presents a new alternating integrator. In the new integrator, the integrator system of real-time drift compensation is adopted as one integral cell while two such integral cells work alternately. To achieve the alternate function, a Field Programmable Gate Array built in the digitizer is utilized. The performance test shows that the developed integrator with the integration time constant of 20 ms has a low integration drift (<15 mV) for 1000 s.

Loop integration results using numerical extrapolation for a non-scalar integral

International Nuclear Information System (INIS)

Doncker, E. de; Shimizu, Y.; Fujimoto, J.; Yuasa, F.; Kaugars, K.; Cucos, L.; Van Voorst, J.

2004-01-01

Loop integration results have been obtained using numerical integration and extrapolation. An extrapolation to the limit is performed with respect to a parameter in the integrand which tends to zero. Results are given for a non-scalar four-point diagram. Extensions to accommodate loop integration by existing integration packages are also discussed. These include: using previously generated partitions of the domain and roundoff error guards

Integrity Checking and Maintenance with Active Rules in XML Databases

DEFF Research Database (Denmark)

Christiansen, Henning; Rekouts, Maria

2007-01-01

While specification languages for integrity constraints for XML data have been considered in the literature, actual technologies and methodologies for checking and maintaining integrity are still in their infancy. Triggers, or active rules, which are widely used in previous technologies for the p...... updates, the method indicates trigger conditions and correctness criteria to be met by the trigger code supplied by a developer or possibly automatic methods. We show examples developed in the Sedna XML database system which provides a running implementation of XML triggers....

A Web-Based Integration Procedure for the Development of Reconfigurable Robotic Work-Cells

Directory of Open Access Journals (Sweden)

Paulo Ferreira

2013-07-01

Full Text Available Concepts related to the development of reconfigurable manufacturing systems (RMS and methodologies to provide the best practices in the processing industry and factory automation, such as system integration and web-based technology, are major issues in designing next-generation manufacturing systems (NGMS. Adaptable and integrable devices are crucial for the success of NGMS. In robotic cells the integration of manufacturing components is essential to accelerate system adaptability. Sensors, control architectures and communication technologies have contributed to achieving further agility in reconfigurable factories. In this work a web-based robotic cell integration procedure is proposed to aid the identification of reconfigurable issues and requirements. This methodology is applied to an industrial robot manipulator to enhance system flexibility towards the development of a reconfigurable robotic platform.

CPV system based on NIR reflecting lamellae integrated into a greenhouse: Optimizing of Optics

NARCIS (Netherlands)

Piet Sonneveld; Gert-Jan Swinkels

2010-01-01

In an previous research project a new type of greenhouse with an integrated concentrated photovoltaic system (CPV) was developed which has an integrated filter for reflecting the near infrared radiation (NIR) to the greenhouse and exploiting this radiation in a solar energy system. The performance

Integrating the Development of Graduate Attributes through Constructive Alignment

Science.gov (United States)

Treleaven, Lesley; Voola, Ranjit

2008-01-01

The importance of graduate attributes is increasingly recognized internationally in higher education and by industry, government, and accrediting bodies. However, integrating the development of graduate attributes, such as critical thinking and critical reflection, has proved challenging in business education. This article demonstrates the value…

Development of Integrated Information System for Travel Bureau Company

Science.gov (United States)

Karma, I. G. M.; Susanti, J.

2018-01-01

Related to the effectiveness of decision-making by the management of travel bureau company, especially by managers, information serves frequent delays or incomplete. Although already computer-assisted, the existing application-based is used only handle one particular activity only, not integrated. This research is intended to produce an integrated information system that handles the overall operational activities of the company. By applying the object-oriented system development approach, the system is built with Visual Basic. Net programming language and MySQL database package. The result is a system that consists of 4 (four) separated program packages, including Reservation System, AR System, AP System and Accounting System. Based on the output, we can conclude that this system is able to produce integrated information that related to the problem of reservation, operational and financial those produce up-to-date information in order to support operational activities and decisionmaking process by related parties.

Integrated impact assessment in the UK--use, efficacy and future development

International Nuclear Information System (INIS)

Milner, Susan J.; Bailey, Cathy; Deans, Julia; Pettigrew, Dulcie

2005-01-01

This paper reports on the findings of an English Department of Health funded study that mapped out examples of integrated impact assessment (IIA) activity, mainly in the UK. Approximately 350 regional and local organisations that have policy and policy implementation roles were contacted via e-mail and from these, 77 telephone interviews were carried out. The interviews revealed 21 examples of IIA being used or developed within the UK. The 77 interviews also generated a rich discussion about the use, efficacy and future development of IIA. Although the findings indicate little IIA activity in the UK, discussions with interviewees suggest that there is growing receptiveness to integrating different forms of assessment into a single assessment process. In part this appears to be driven by sustainable development objectives, both at a strategic and at a local level. In part receptivity to IIA may also be driven by a growing interest in health impact assessment (HIA). There are advocates of the need to integrate health criteria more fully into other forms of impact assessment. The study also highlights the challenges involved in trying to develop IIA methods that are adaptable, flexible and tailored to the different needs of policy-makers and planners

New integrable problems in a rigid body dynamics with cubic integral in velocities

Science.gov (United States)

Elmandouh, A. A.

2018-03-01

We introduce a new family of the 2D integrable mechanical system possessing an additional integral of the third degree in velocities. This system contains 20 arbitrary parameters. We also clarify that the majority of the previous systems with a cubic integral can be reconstructed from it as a special version for certain values of those parameters. The applications of this system are extended to include the problem of motion of a particle and rigid body about its fixed point. We announce new integrable problems describing the motion of a particle in the plane, pseudosphere, and surfaces of variable curvature. We also present a new integrable problem in a rigid body dynamics and this problem generalizes some of the previous results for Sokolov-Tsiganov, Yehia, Stretensky, and Goriachev.

The Contribution of Network Organization and Integration to the Development of Cognitive Control.

Science.gov (United States)

Marek, Scott; Hwang, Kai; Foran, William; Hallquist, Michael N; Luna, Beatriz

2015-12-01

Cognitive control, which continues to mature throughout adolescence, is supported by the ability for well-defined organized brain networks to flexibly integrate information. However, the development of intrinsic brain network organization and its relationship to observed improvements in cognitive control are not well understood. In the present study, we used resting state functional magnetic resonance imaging (RS-fMRI), graph theory, the antisaccade task, and rigorous head motion control to characterize and relate developmental changes in network organization, connectivity strength, and integration to inhibitory control development. Subjects were 192 10-26-y-olds who were imaged during 5 min of rest. In contrast to initial studies, our results indicate that network organization is stable throughout adolescence. However, cross-network integration, predominantly of the cingulo-opercular/salience network, increased with age. Importantly, this increased integration of the cingulo-opercular/salience network significantly moderated the robust effect of age on the latency to initiate a correct inhibitory control response. These results provide compelling evidence that the transition to adult-level inhibitory control is dependent upon the refinement and strengthening of integration between specialized networks. Our findings support a novel, two-stage model of neural development, in which networks stabilize prior to adolescence and subsequently increase their integration to support the cross-domain incorporation of information processing critical for mature cognitive control.

The Contribution of Network Organization and Integration to the Development of Cognitive Control

Science.gov (United States)

Marek, Scott; Hwang, Kai; Foran, William; Hallquist, Michael N.; Luna, Beatriz

2015-01-01

Abstract Cognitive control, which continues to mature throughout adolescence, is supported by the ability for well-defined organized brain networks to flexibly integrate information. However, the development of intrinsic brain network organization and its relationship to observed improvements in cognitive control are not well understood. In the present study, we used resting state functional magnetic resonance imaging (RS-fMRI), graph theory, the antisaccade task, and rigorous head motion control to characterize and relate developmental changes in network organization, connectivity strength, and integration to inhibitory control development. Subjects were 192 10–26-y-olds who were imaged during 5 min of rest. In contrast to initial studies, our results indicate that network organization is stable throughout adolescence. However, cross-network integration, predominantly of the cingulo-opercular/salience network, increased with age. Importantly, this increased integration of the cingulo-opercular/salience network significantly moderated the robust effect of age on the latency to initiate a correct inhibitory control response. These results provide compelling evidence that the transition to adult-level inhibitory control is dependent upon the refinement and strengthening of integration between specialized networks. Our findings support a novel, two-stage model of neural development, in which networks stabilize prior to adolescence and subsequently increase their integration to support the cross-domain incorporation of information processing critical for mature cognitive control. PMID:26713863

The Contribution of Network Organization and Integration to the Development of Cognitive Control.

Directory of Open Access Journals (Sweden)

Scott Marek

2015-12-01

Full Text Available Cognitive control, which continues to mature throughout adolescence, is supported by the ability for well-defined organized brain networks to flexibly integrate information. However, the development of intrinsic brain network organization and its relationship to observed improvements in cognitive control are not well understood. In the present study, we used resting state functional magnetic resonance imaging (RS-fMRI, graph theory, the antisaccade task, and rigorous head motion control to characterize and relate developmental changes in network organization, connectivity strength, and integration to inhibitory control development. Subjects were 192 10-26-y-olds who were imaged during 5 min of rest. In contrast to initial studies, our results indicate that network organization is stable throughout adolescence. However, cross-network integration, predominantly of the cingulo-opercular/salience network, increased with age. Importantly, this increased integration of the cingulo-opercular/salience network significantly moderated the robust effect of age on the latency to initiate a correct inhibitory control response. These results provide compelling evidence that the transition to adult-level inhibitory control is dependent upon the refinement and strengthening of integration between specialized networks. Our findings support a novel, two-stage model of neural development, in which networks stabilize prior to adolescence and subsequently increase their integration to support the cross-domain incorporation of information processing critical for mature cognitive control.

Horizontal integration in the development strategy of mining companies

Directory of Open Access Journals (Sweden)

Jan Kudełko

2016-01-01

Full Text Available Integration strategy is one option in the development of mining companies and is implemented through a connection of either processes or economic entities which operate or may operate separately. Usually this strategy is carried out by companies that occupy a very strong competitive position. Considering its direction, it may be horizontal or vertical. Horizontal integration strategy stems from a desire to increase market share by an entrepreneur or create a new company based on common know-how and combined operational processes. It can be realized in an external dimension through a merger or takeover, as well as in the internal dimension based on its own resources. The external dimension is based on capital or contractual integration of a company with external economic entities performing related or conglomerate activity. The targets of such integration have a resource, a market effectiveness, or a competence nature. In the case of mining companies, it covers all important activity areas, including geology, mining, processing, environmental protection, and waste management, and is carried out with due diligence. In the internal dimension, the strategy of horizontal integration consists in consolidating the strategic targets of all business units around the company’s (corporation’s targets. The authors focused on two trends most relevant to pursuing a horizontal integration strategy, including increasing the company’s flexibility and undertaking joint activities. Flexibility consists in the potential ability of the company to adapt quickly to changed environment conditions. Joint activity includes co-operation of its respective units in terms of products, markets, and functions.

Development of safety analysis technology for integral reactor

International Nuclear Information System (INIS)

Kim, Hee Cheol; Kim, K. K.; Kim, S. H.

2002-04-01

The state-of-the-arts for the integral reactor was performed to investigate the safety features. The safety and performance of SMART were assessed using the technologies developed during the study. For this purpose, the computer code system and the analysis methodology were developed and the safety and performance analyses on SMART basic design were carried out for the design basis event and accident. The experimental facilities were designed for the core flow distribution test and the self-pressurizing pressurizer performance test. The tests on the 2-phase critical flow with non-condensable gas were completed and the results were used to assess the critical flow model. Probabilistic Safety Assessment(PSA) was carried out to evaluate the safety level and to optimize the design by identifying and remedying any weakness in the design. A joint study with KINS was carried out to promote licensing environment. The generic safety issues of integral reactors were identified and the solutions were formulated. The economic evaluation of the SMART desalination plant and the activities related to the process control were carried out in the scope of the study

Using an Integrated Distributed Test Architecture to Develop an Architecture for Mars

Science.gov (United States)

Othon, William L.

2016-01-01

The creation of a crew-rated spacecraft architecture capable of sending humans to Mars requires the development and integration of multiple vehicle systems and subsystems. Important new technologies will be identified and matured within each technical discipline to support the mission. Architecture maturity also requires coordination with mission operations elements and ground infrastructure. During early architecture formulation, many of these assets will not be co-located and will required integrated, distributed test to show that the technologies and systems are being developed in a coordinated way. When complete, technologies must be shown to function together to achieve mission goals. In this presentation, an architecture will be described that promotes and advances integration of disparate systems within JSC and across NASA centers.

iTRAQ-Based Proteomics Analysis and Network Integration for Kernel Tissue Development in Maize

Science.gov (United States)

Dong, Yongbin; Wang, Qilei; Du, Chunguang; Xiong, Wenwei; Li, Xinyu; Zhu, Sailan; Li, Yuling

2017-01-01

Grain weight is one of the most important yield components and a developmentally complex structure comprised of two major compartments (endosperm and pericarp) in maize (Zea mays L.), however, very little is known concerning the coordinated accumulation of the numerous proteins involved. Herein, we used isobaric tags for relative and absolute quantitation (iTRAQ)-based comparative proteomic method to analyze the characteristics of dynamic proteomics for endosperm and pericarp during grain development. Totally, 9539 proteins were identified for both components at four development stages, among which 1401 proteins were non-redundant, 232 proteins were specific in pericarp and 153 proteins were specific in endosperm. A functional annotation of the identified proteins revealed the importance of metabolic and cellular processes, and binding and catalytic activities for the tissue development. Three and 76 proteins involved in 49 Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were integrated for the specific endosperm and pericarp proteins, respectively, reflecting their complex metabolic interactions. In addition, four proteins with important functions and different expression levels were chosen for gene cloning and expression analysis. Different concordance between mRNA level and the protein abundance was observed across different proteins, stages, and tissues as in previous research. These results could provide useful message for understanding the developmental mechanisms in grain development in maize. PMID:28837076

Is Economic Development Promoting Monetary Integration in East Asia?

Directory of Open Access Journals (Sweden)

Kentaro Kawasaki

2015-10-01

Full Text Available This paper tries to investigate whether there exist international integrated markets among East Asian economies, by employing the Generalized Purchasing Power Parity (G-PPP model, then, it would help to suggest whether the East Asian region is the Optimum Currency Area (OCA or not. The empirical results in this paper suggest that holding the G-PPP among nine Asian countries (China, Indonesia, Japan, Korea, Malaysia, the Philippines, Singapore, Thailand and Vietnam becomes more applicable in 2000–2013 than of that in 1984–1997. In the period of “globalization,” which is characterized by expansion of world trade, increase of international capital flows, and development of information and communications technologies, Asian economic development has been promoting not only economic integrations but also constructing the stable linkages of real exchange rates. Therefore, it would help to adopt regional coordination for monetary policies to assure the feasibility of a possible monetary union.

Development of Sremski Karlovci wine tourism and integration in the regional tourism offer

Directory of Open Access Journals (Sweden)

Škrbić Iva

2015-01-01

Full Text Available Integration and globalisation processes are unavoidable in all fields of business economy, including tourism. Potential success of wine tourism in Sremski Karlovci should be based on diversification of products that entails an influx of tourism and winemaking into other fields of economy. During the development of wine tourism offer, it would be advisable to consult the experiences of the developed wine region and to use their models, which is done in this paper, via benchmark analysis of offers of Sremski Karlovci wineries with those of the Ontario region (Canada and the place of Villány (Hungary. The goal of this paper is to establish the possible directions of development of the integral product of wine tourism of Sremski Karlovci as a prerequisite for integration into the regional tourism offer. The research indicates that wine tourism offer of Sremski Karlovci is underdeveloped. A large number of product diversification fields are not recognised. The future development of Sremski Karlovci wineries should be based on conquering of those very fields. Such a tourism product could more easily be integrated into the regional wine tourism offer.

Research Ethics and Commercial Drug Development: When Integrity Threatens Profitability

Directory of Open Access Journals (Sweden)

Bélisle Pipon, Jean-Christophe

2016-05-01

Full Text Available This case, based on personal experiences and on those found in the literature, highlights the delicate tension faced by drug development companies having to balance research integrity and their profitability.

Considerations in implementing integrated biomass energy systems in developing countries

International Nuclear Information System (INIS)

Perlack, R.D.; Ranney, J.W.

1993-01-01

Biomass energy is emerging as a real option for satisfying power needs in developing countries. Experience has shown improvements in GDP are directly linked to increased consumption of energy. Biomass energy can also be environmentally and developmentally beneficial where it will be both grown and used. Biomass production can offset deforestation, reduce soil erosion, increase rural employment, and stimulate development. Moreover, when biomass is grown renewably there is no net buildup of atmospheric carbon. Issues and barriers associated with implementing integrated biomass energy systems in developing countries are discussed. An integrated biomass energy system is dependent on sustainably grown and managed energy crops, supportive of rural development, and environmentally beneficial, adapted to local conditions; takes advantage of by- and co-products and uses conversion technologies that have been optimized for biomass. A preliminary evaluation of a biomass to electricity project relying on plantation grown feedstocks in Southwest China indicates that biomass could be grown and converted to electricity at costs lower than alternatives and yield an internal rate of return of about 15%. The IRR based on a social and environmental benefits are substantial and investment in the facility is well-justified. However, assessing biomass energy systems is exceedingly complex. Considerations are grouped into biomass production, biomass logistics and transport, and biomass conversion. Implementation requires considerations of energy and economics, institutional and social issues, and environmental issues. The conclusion that such a project would be viable in rural China is shadowed by many site-specific circumstances and highlights the need for systematic and integrated appraisal

Asset management -- Integrated software optimizes production performance

International Nuclear Information System (INIS)

Polczer, S.

1998-01-01

Developments in data collection and retrieval systems to allow timely cost analysis, financial reporting and production management are discussed. One of the most important new OLAP (on-line analytical processing) products is Energy Warehouse which gathers field information from various sources, allows advanced searches, and generates reports previously unavailable in other conventional financial accounting systems. Another OLAP-based system, the Canadian Upstream Energy System (CUES), was developed by the Oracle Corporation and the Calgary-based Applied Terravision Systems (ATS) Inc. CUES combines Oracle's universal data server software development tools with ATS's upstream financial, land, geotechnical and production applications. ATS also developed a product called IDPMARS (Integrated Daily Production Management Accounting Reporting System). It interfaces with CUES to link working interests, government royalties, administration, facility charges, lifting costs, transportation tooling, and customers by integrating field data collection systems with financial accounting

Asset management -- Integrated software optimizes production performance

Energy Technology Data Exchange (ETDEWEB)

Polczer, S.

1998-10-01

Developments in data collection and retrieval systems to allow timely cost analysis, financial reporting and production management are discussed. One of the most important new OLAP (on-line analytical processing) products is Energy Warehouse which gathers field information from various sources, allows advanced searches, and generates reports previously unavailable in other conventional financial accounting systems. Another OLAP-based system, the Canadian Upstream Energy System (CUES), was developed by the Oracle Corporation and the Calgary-based Applied Terravision Systems (ATS) Inc. CUES combines Oracle`s universal data server software development tools with ATS`s upstream financial, land, geotechnical and production applications. ATS also developed a product called IDPMARS (Integrated Daily Production Management Accounting Reporting System). It interfaces with CUES to link working interests, government royalties, administration, facility charges, lifting costs, transportation tooling, and customers by integrating field data collection systems with financial accounting.

Intermittent explosive disorder: development of integrated research criteria for Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition.

Science.gov (United States)

Coccaro, Emil F

2011-01-01

This study was designed to develop a revised diagnostic criteria set for intermittent explosive disorder (IED) for consideration for inclusion in Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-V). This revised criteria set was developed by integrating previous research criteria with elements from the current DSM-IV set of diagnostic criteria. Evidence supporting the reliability and validity of IED-IR ("IED Integrated Criteria") in a new and well-characterized group of subjects with personality disorder is presented. Clinical, phenomenologic, and diagnostic data from 201 individuals with personality disorder were reviewed. All IED diagnoses were assigned using a best-estimate process (eg, kappa for IED-IR >0.85). In addition, subjects meeting IED-IR criteria had higher scores on dimensional measures of aggression and had lower global functioning scores than non-IED-IR subjects, even when related variables were controlled. The IED-IR criteria were more sensitive than the DSM-IV criteria only in identifying subjects with significant impulsive-aggressive behavior by a factor of 16. We conclude that the IED-IR criteria can be reliably applied and have sufficient validity to warrant consideration as DSM-V criteria for IED. Copyright © 2011 Elsevier Inc. All rights reserved.

The amount and integrity of mtDNA in maize decline with development.

Science.gov (United States)

Oldenburg, Delene J; Kumar, Rachana A; Bendich, Arnold J

2013-02-01

In maize and other grasses there is a developmental gradient from the meristematic cells at the base of the stalk to the differentiated cells at the leaf tip. This gradient presents an opportunity to investigate changes in mitochondrial DNA (mtDNA) that accompany growth under light and dark conditions, as done previously for plastid DNA. Maize mtDNA was analyzed by DAPI-DNA staining of individual mitochondria, gel electrophoresis/blot hybridization, and real-time qPCR. Both the amount and integrity of the mtDNA were found to decline with development. There was a 20-fold decline in mtDNA copy number per cell from the embryo to the light-grown leaf blade. The amount of DNA per mitochondrial particle was greater in dark-grown leaf blade (24 copies, on average) than in the light (2 copies), with some mitochondria lacking any detectable DNA. Three factors that influence the demise of mtDNA during development are considered: (1) the decision to either repair or degrade mtDNA molecules that are damaged by the reactive oxygen species produced as byproducts of respiration; (2) the generation of ATP by photophosphorylation in chloroplasts, reducing the need for respiratory-competent mitochondria; and (3) the shift in mitochondrial function from energy-generating respiration to photorespiration during the transition from non-green to green tissue.

Integrated scenarios of regional development in Ceará and Piauí

NARCIS (Netherlands)

Döll, Petra; Krol, Martinus S.; Fuhr, Dagmar; Gaiser, T.; Krol, M.S; Frischkorn, H.; de Araújo, J.C.

2003-01-01

Scenarios of the future are an important tool for supporting sustainability-oriented regional planning. To assist regional planning in two federal states in semi-arid Northeastern Brazil, Ceará and Piauí, we developed integrated qualitative-quantitative scenarios which show potential developments of

[The development of an integrated suicide-violence prevention program for adolescents].

Science.gov (United States)

Park, Hyun Sook

2008-08-01

The purpose of this study was to develop an integrated suicide-violence prevention program for adolescents. Another purpose was to evaluate the effects of the integrated suicide-violence prevention program on self-esteem, parent-child communication, aggression, and suicidal ideation in adolescents. The study employed a quasi-experimental design. Participants for the study were high school students, 24 in the experimental group and 25 in the control group. Data was analyzed by using the SPSS/WIN. 11.5 program with chi2 test, t-test, and 2-way ANOVA. Participants in the integrated suicide-violence prevention program reported increased self-esteem scores, which was significantly different from those in the control group. Participants in the integrated suicide-violence prevention program reported decreased aggression and suicidal ideation scores, which was significantly different from those in the control group. The integrated suicide-violence prevention program was effective in improving self-esteem and decreasing aggression and suicidal ideation for adolescents. Therefore, this approach is recommended as the integrated suicide-violence prevention strategy for adolescents.

Integrating Early Child Development and Violence Prevention Programs: A Systematic Review.

Science.gov (United States)

Efevbera, Yvette; McCoy, Dana C; Wuermli, Alice J; Betancourt, Theresa S

2018-03-01

Limited evidence describes promoting development and reducing violence in low- and middle-income countries (LMICs), a missed opportunity to protect children and promote development and human capital. This study presents a systematic literature review of integrated early childhood development plus violence prevention (ECD+VP) interventions in LMICs. The search yielded 5,244 unique records, of which N = 6 studies met inclusion criteria. Interventions were in Chile, Jamaica, Lebanon, Mexico, Mozambique, and Turkey. Five interventions were parent education programs, including center-based sessions (n = 3) and home visiting (n = 2), while one intervention was a teacher education program. All but one study reported improvements in both child development and maltreatment outcomes. The dearth of evidence on ECD+VP interventions suggests additional research is needed. Integrated ECD+VP interventions may improve multiple child outcome domains while leveraging limited resources in LMICs. © 2018 Wiley Periodicals, Inc.

Development of wide range charge integration application specified integrated circuit for photo-sensor

Energy Technology Data Exchange (ETDEWEB)

Katayose, Yusaku, E-mail: katayose@ynu.ac.jp [Department of Physics, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501 (Japan); Ikeda, Hirokazu [Institute of Space and Astronautical Science (ISAS)/Japan Aerospace Exploration Agency (JAXA), 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Tanaka, Manobu [National Laboratory for High Energy Physics, KEK, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Shibata, Makio [Department of Physics, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501 (Japan)

2013-01-21

A front-end application specified integrated circuit (ASIC) is developed with a wide dynamic range amplifier (WDAMP) to read-out signals from a photo-sensor like a photodiode. The WDAMP ASIC consists of a charge sensitive preamplifier, four wave-shaping circuits with different amplification factors and Wilkinson-type analog-to-digital converter (ADC). To realize a wider range, the integrating capacitor in the preamplifier can be changed from 4 pF to 16 pF by a two-bit switch. The output of a preamplifier is shared by the four wave-shaping circuits with four gains of 1, 4, 16 and 64 to adapt the input range of ADC. A 0.25-μm CMOS process (of UMC electronics CO., LTD) is used to fabricate the ASIC with four-channels. The dynamic range of four orders of magnitude is achieved with the maximum range over 20 pC and the noise performance of 0.46 fC + 6.4×10{sup −4} fC/pF. -- Highlights: ► A front-end ASIC is developed with a wide dynamic range amplifier. ► The ASIC consists of a CSA, four wave-shaping circuits and pulse-height-to-time converters. ► The dynamic range of four orders of magnitude is achieved with the maximum range over 20 pC.

Developing 21st century skills in chemistry classrooms: Opportunities and challenges of STEAM integration

Science.gov (United States)

Hadinugrahaningsih, Tritiyatma; Rahmawati, Yuli; Ridwan, Achmad

2017-08-01

The paper portrays the first year of two-year study in integration Science, Technology, Engineering, Art, and Mathematics (STEAM) in chemistry learning. The research focused on developing 21st-century skills of chemistry students in secondary schools. The 21st-century skills as a set of abilities that students need to develop in facing the future challenge which involves learning, literacy, and life skills. The study was conducted in two secondary schools both public and private school in topics of hydrocarbon, petroleum, solubility, and acid base in year 10 and 11. The qualitative methodology was applied to explore the students' learning experiences and understanding the research context. Data was collected through observation, interview, reflective journal, and 21st-century rubric. The STEAM approach was integrated through modification of project-based learning model. The students had opportunities to develop their own projects by integrating chemistry and STEAM principles to their project. The results show that students have developed their critical and creative thinking, problem-solving skills, collaboration and argumentation skills, leadership and responsibility, information and literacy skills. The researchers faced the challenges of integrating STEAM within the chemistry curricula, empowering students, and managing the teaching and time resources. Students have started to challenge their critical and creative thinking within the existing learning environments. Integrating STEAM into chemistry learning has developed students' 21st-century skills in those three areas. Teachers also learned to develop their competencies for being facilitators and agents of change, in addition to skills development in dealing with students' differences.

An Integrated Environment for Batch Process Development - From Recipe to Manufacture

DEFF Research Database (Denmark)

Batch process development involves the process of converting a chemical synthesis into an optimum, safe, robust, and economical process for manufacturing the chemical of desired quality at the ultimate desired scale. In this paper we describe a strategy for developing a set of integrated decision...

An Integrated Theory of Whole Number and Fractions Development

Science.gov (United States)

Siegler, Robert S.; Thompson, Clarissa A.; Schneider, Michael

2011-01-01

This article proposes an integrated theory of acquisition of knowledge about whole numbers and fractions. Although whole numbers and fractions differ in many ways that influence their development, an important commonality is the centrality of knowledge of numerical magnitudes in overall understanding. The present findings with 11- and 13-year-olds…

Integrating Development, Alumni Relations, and Marketing for Fundraising Success

Science.gov (United States)

Stevick, Thomas R.

2010-01-01

At many institutions, the vice president of institutional advancement oversees the functions of development, alumni relations, and marketing and communications. University leaders expect these functions to be integrated and to work hand-in-hand to advance the institution's mission, particularly in the area of private donations. The reality is that…

Development of an integrated data acquision system for research vessels

Digital Repository Service at National Institute of Oceanography (India)

Mehra, P.; Desai, R.G.P.

This article describes an integrated data acquisition system (IDAS) designed and developed for multi-oceanographic research vessels. The prime motivation was to provide a flexible system, which could be used in the context of ocean related...

Jordanian Pre-Service Teachers' and Technology Integration: A Human Resource Development Approach

Science.gov (United States)

Al-Ruz, Jamal Abu; Khasawneh, Samer

2011-01-01

The purpose of this study was to test a model in which technology integration of pre-service teachers was predicted by a number of university-based and school-based factors. Initially, factors affecting technology integration were identified, and a research-based path model was developed to explain causal relationships between these factors. The…

Natural gas development and integration for Asian markets

International Nuclear Information System (INIS)

Hovdestad, W. R.; Belgrave, J. D. M.

1995-01-01

Development schedule, and natural gas resources available to Southeast Asian countries were discussed in view of the area's rapidly growing market for natural gas. As evidence, the increased regional trade and cooperation are evident in the form of organizations like the Association of South East Asian Nations (ASEAN) and Asia Pacific Economic Cooperation (APEC) Forum were cited. Liquid natural gas pipeline grids were about 1/3 complete at the time of writing. Further development and completion of this system was expected to occur over the next 3 decades. Integration of new and existing facilities were seen to be inevitable future developments. The potential for international movement of natural gas from producing countries to consuming countries was assessed and was expected to remain favourable in the long term

SiGe Integrated Circuit Developments for SQUID/TES Readout

Science.gov (United States)

Prêle, D.; Voisin, F.; Beillimaz, C.; Chen, S.; Piat, M.; Goldwurm, A.; Laurent, P.

2018-03-01

SiGe integrated circuits dedicated to the readout of superconducting bolometer arrays for astrophysics have been developed since more than 10 years at APC. Whether for Cosmic Microwave Background (CMB) observations with the QUBIC ground-based experiment (Aumont et al. in astro-ph.IM, 2016. arXiv:1609.04372) or for the Hot and Energetic Universe science theme with the X-IFU instrument on-board of the ATHENA space mission (Barret et al. in SPIE 9905, space telescopes & instrumentation 2016: UV to γ Ray, 2016. https://doi.org/10.1117/12.2232432), several kinds of Transition Edge Sensor (TES) (Irwin and Hilton, in ENSS (ed) Cryogenic particle detection, Springer, Berlin, 2005) arrays have been investigated. To readout such superconducting detector arrays, we use time or frequency domain multiplexers (TDM, FDM) (Prêle in JINST 10:C08015, 2016. https://doi.org/10.1088/1748-0221/10/08/C08015) with Superconducting QUantum Interference Devices (SQUID). In addition to the SQUID devices, low-noise biasing and amplification are needed. These last functions can be obtained by using BiCMOS SiGe technology in an Application Specific Integrated Circuit (ASIC). ASIC technology allows integration of highly optimised circuits specifically designed for a unique application. Moreover, we could reach very low-noise and wide band amplification using SiGe bipolar transistor either at room or cryogenic temperatures (Cressler in J Phys IV 04(C6):C6-101, 1994. https://doi.org/10.1051/jp4:1994616). This paper discusses the use of SiGe integrated circuits for SQUID/TES readout and gives an update of the last developments dedicated to the QUBIC telescope and to the X-IFU instrument. Both ASIC called SQmux128 and AwaXe are described showing the interest of such SiGe technology for SQUID multiplexer controls.

Development of Integrated Flood Analysis System for Improving Flood Mitigation Capabilities in Korea

Science.gov (United States)

Moon, Young-Il; Kim, Jong-suk

2016-04-01

Recently, the needs of people are growing for a more safety life and secure homeland from unexpected natural disasters. Flood damages have been recorded every year and those damages are greater than the annual average of 2 trillion won since 2000 in Korea. It has been increased in casualties and property damages due to flooding caused by hydrometeorlogical extremes according to climate change. Although the importance of flooding situation is emerging rapidly, studies related to development of integrated management system for reducing floods are insufficient in Korea. In addition, it is difficult to effectively reduce floods without developing integrated operation system taking into account of sewage pipe network configuration with the river level. Since the floods result in increasing damages to infrastructure, as well as life and property, structural and non-structural measures should be urgently established in order to effectively reduce the flood. Therefore, in this study, we developed an integrated flood analysis system that systematized technology to quantify flood risk and flood forecasting for supporting synthetic decision-making through real-time monitoring and prediction on flash rain or short-term rainfall by using radar and satellite information in Korea. Keywords: Flooding, Integrated flood analysis system, Rainfall forecasting, Korea Acknowledgments This work was carried out with the support of "Cooperative Research Program for Agriculture Science & Technology Development (Project No. PJ011686022015)" Rural Development Administration, Republic of Korea

Development the method of integral evaluation the efficiency of management of financing the enterprise

Directory of Open Access Journals (Sweden)

Opeshko Nataliya Sergiivna

2017-06-01

Full Text Available The essence of the concept of «financing the enterprise» was determined. The system of indicators of measuring the effectiveness of management of financing the enterprise was developed. The internal structure of linkages in the scorecard was investigated. The method of integral evaluation of management of financing the enterprise was developed. The usefulness of using the developed method of integral evaluation was proved based on conducted experiments.

Continuous Integration in PHP web applications development

OpenAIRE

Hujer, Martin

2011-01-01

This work deals with continuous integration of web applications, especially those in PHP language. The main objective is the selection of the server for continuous integration, its deployment and configuration for continuous integration of PHP web applications. The first chapter describes the concept of continuous integration and its individual techniques. The second chapter deals with the choice of server for continuous integration and its basic settings. The third chapter contains an overvi...

Teacher Design in Teams as a Professional Development Arrangement for Developing Technology Integration Knowledge and Skills of Science Teachers in Tanzania

Science.gov (United States)

Kafyulilo, Ayoub; Fisser, Petra; Voogt, Joke

2016-01-01

This study investigated the impact of teacher design teams as a professional development arrangement for developing technology integration knowledge and skills among in-service science teachers. The study was conducted at a secondary school in Tanzania, where 12 in-service science teachers participated in a workshop about technology integration in…

Implementation & Analysis of Integrated Utility System in Developing Nation like India

Directory of Open Access Journals (Sweden)

Rajan Gupta

2016-07-01

Full Text Available Public utility systems are prevalent around the world but are struggling in developing nations like India to work efficiently. Integration of different utilities can be a possible solution on the technology front, so that more requests can be handled with lesser problems. This study provides the implementation design and benefits of an already proposed integration system by the same authors. It is found that Data Storage, Access Time, Transaction Cost, security cost and server’s busy time can become more effective if the implementation of integration system can be put in place. The working prototype is based on three utilities (Gas, Power & Water of Delhi-NCR, India.

FY-94 buried waste integrated demonstration program report

International Nuclear Information System (INIS)

1994-01-01

The Buried Waste Integrated Demonstration (BWID) supports the applied research, development, demonstration, and evaluation of a multitude of advanced technologies. These technologies are being integrated to form a comprehensive remediation system for the effective and efficient remediation of buried waste. These efforts are identified and coordinated in support of the U.S. Department of Energy (DOE), Environmental Restoration and Waste Management (ER/WM) needs and objectives. This document summarizes previous demonstrations and describes the FY-94 BWID technology development and demonstration activities. Sponsored by the DOE Office of Technology Development (OTD), BWID works with universities and private industry to develop these technologies, which are being transferred to the private sector for use nationally and internationally. A public participation policy has been established to provide stakeholders with timely and accurate information and meaningful opportunities for involvement in the technology development and demonstration process

SPECIFICS AND WAYS OF DEVELOPMENT OF ENTERPRISE INTEGRATION IN THE FORMER SOVIET UNION

Directory of Open Access Journals (Sweden)

Еlena А. Hudorenko

2014-01-01

Full Text Available The article is focused on problems and futuredevelopment of integration processes in thepost-Soviet space. The author highlightssome of the key factors contributing to thedevelopment of centripetal and centrifugaltrends of the region. Special attention isgiven to the industrial policy of countriesinvolved in integration processes. The paper analyzes the role and importance of corporate integration as well as discovers ways ofits development.

Virtual Collaborative Simulation Environment for Integrated Product and Process Development

Science.gov (United States)

Gulli, Michael A.

1997-01-01

Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

Development of small and medium integral reactor. ctor Development of fluid system design for small and medium integral reactor

International Nuclear Information System (INIS)

Lee, D. J.; Chang, M. H.; Kim, K. K.; Kim, J. P.; Yoon, J. H.; Lee, Y. J.; Park, C. T.; Bae, Y. Y.; Kang, D. J.; Lee, K. H.; Lee, J.; Kim, H. Y.; Cho, B. H.; Seo, J. K.; Kang, K. S.; Kang, H. O.

1997-07-01

The purpose of this study is to develop system design technology of integral reactor, as a new design concept of small and medium reactor having enhanced safety and economy, and to have a design assessment / verification technology through basic thermal hydraulic experiments. This report describes of the following: 1) basic requirement for the integral reactor system design 2) Conceptual design of primary and secondary circuits of NSSS, emergency core cooling system, passive residual heat removal system, severe accident mitigation cooling system, passive residual heat removal system, severe accident mitigation system and other auxiliary system 3) Requirements and test program for the basic thermal hydraulic experiments including, CHF test for hexagonal fuel assembly, flow instability for once-through steam generator, core flow distribution test and verification test for non-condensable gas model in RELAP-5 code. The results of this study can be utilized for using as the foundation technology of in the next basic design phase and design technology for future advanced reactors. (author). 30 refs.,24 tabs., 56 figs

Development of small and medium integral reactor. ctor Development of fluid system design for small and medium integral reactor

Energy Technology Data Exchange (ETDEWEB)

Lee, D. J.; Chang, M. H.; Kim, K. K.; Kim, J. P.; Yoon, J. H.; Lee, Y. J.; Park, C. T.; Bae, Y. Y.; Kang, D. J.; Lee, K. H.; Lee, J.; Kim, H. Y.; Cho, B. H.; Seo, J. K.; Kang, K. S.; Kang, H. O.

1997-07-01

The purpose of this study is to develop system design technology of integral reactor, as a new design concept of small and medium reactor having enhanced safety and economy, and to have a design assessment / verification technology through basic thermal hydraulic experiments. This report describes of the following: (1) basic requirement for the integral reactor system design (2) Conceptual design of primary and secondary circuits of NSSS, emergency core cooling system, passive residual heat removal system, severe accident mitigation cooling system, passive residual heat removal system, severe accident mitigation system and other auxiliary system (3) Requirements and test program for the basic thermal hydraulic experiments including, CHF test for hexagonal fuel assembly, flow instability for once-through steam generator, core flow distribution test and verification test for non-condensable gas model in RELAP-5 code. The results of this study can be utilized for using as the foundation technology of in the next basic design phase and design technology for future advanced reactors. (author). 30 refs.,24 tabs., 56 figs.

Evolution of Project Management in Integration Development Trends of Today’s Russia

Directory of Open Access Journals (Sweden)

Lukmanova Inessa

2017-01-01

Full Text Available Today’s development trends are affected by many external and internal factors, stepping up globalization processes, faster innovation cycles, negative effects of various bans, import and export sanctions slapped on some categories of goods, technologies, capital, etc. Tit-for-tat responses of the economic systems seek sustainable development of countries taking part in the integration processes. A radical-yet-constructive strategy that deepens integration can tackle the problem. Its focus is determined by the need to upgrade the economies of the former Soviet Union; while a mutual interest in the rollout of the synergistic integration potential channels common efforts on transcontinental megaprojects. A new type of integration projects creates comprehensive methods of project management. They feature the need for information transparency and controlled alignment of innovation, investment, construction and resource capacities of member countries. With streamlined resource flows, the Eurasian transit will help facilitate and cut costs of commodity exchange among countries, provided they take synchronized efforts in not just technical and technological, but also organizational, economic, legal and IT innovations.

DEVELOPING AN INTEGRATED NATIONAL STRATEGY FOR THE DISPOSITION OF SPENT NUCLEAR FUEL

International Nuclear Information System (INIS)

Gelles, C.M.

2003-01-01

This paper summarizes the Department of Energy's (DOE's) current efforts to strengthen its activities for the management and disposition of DOE-owned spent nuclear fuel (SNF). In August 2002 an integrated, ''corporate project'' was initiated by the Office of Environmental Management (EM) to develop a fully integrated strategy for disposition of the approximately ∼250,000 DOE SNF assemblies currently managed by EM. Through the course of preliminary design, the focus of this project rapidly evolved to become DOE-wide. It is supported by all DOE organizations involved in SNF management, and represents a marked change in the way DOE conducts its business. This paper provides an overview of the Corporate Project for Integrated/Risk-Driven Disposition of SNF (Corporate SNF Project), including a description of its purpose, scope and deliverables. It also summarizes the results of the integrated project team's (IPT's) conceptual design efforts, including the identification of project/system requirements and alternatives. Finally, this paper highlights the schedule of the corporate project, and its progress towards development of a DOE corporate strategy for SNF disposition

Trends in scenario development methodologies and integration in NUMO's approach

International Nuclear Information System (INIS)

Ebashi, Takeshi; Ishiguro, Katsuhiko; Wakasugi, Keiichiro; Kawamura, Hideki; Gaus, Irina; Vomvoris, Stratis; Martin, Andrew J.; Smith, Paul

2011-01-01

The development of scenarios for quantitative or qualitative analysis is a key element of the assessment of the safety of geological disposal systems. As an outcome of an international workshop attended by European and the Japanese implementers, a number of features common to current methodologies could be identified, as well as trends in their evolution over time. In the late nineties, scenario development was often described as a bottom-up process, whereby scenarios were said to be developed in essence from FEP databases. Nowadays, it is recognised that, in practice, the approaches actually adopted are better described as top-down or 'hybrid', taking as their starting point an integrated (top-down) understanding of the system under consideration including uncertainties in initial state, sometimes assisted by the development of 'storyboards'. A bottom-up element remains (hence the term 'hybrid') to the extent that FEP databases or FEP catalogues (including interactions) are still used, but the focus is generally on completeness checking, which occurs parallel to the main assessment process. Recent advances focus on the consistent treatment of uncertainties throughout the safety assessment and on the integration of operational safety and long term safety. (author)

The Development of a Roof Integrated Solar Hot Water System

Energy Technology Data Exchange (ETDEWEB)

Menicucci, David F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Energy Infrastructure and DER Dept.; Moss, Timothy A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Solar Technologies Dept.; Palomino, G. Ernest [Salt River Project (SRP), Tempe, AZ (United States)

2006-09-01

The Salt River Project (SRP), in conjunction with Sandia National Laboratories (SNL) and Energy Laboratories, Inc. (ELI), collaborated to develop, test, and evaluate an advanced solar water-heating product for new homes. SRP and SNL collaborated under a Department of Energy Cooperative Research and Development Agreement (CRADA), with ELI as SRP's industry partner. The project has resulted in the design and development of the Roof Integrated Thermal Siphon (RITH) system, an innovative product that features complete roof integration, a storage tank in the back of the collector and below the roofline, easy installation by homebuilders, and a low installed cost. SRP's market research guided the design, and the laboratory tests conducted at SNL provided information used to refine the design of field test units and indicated that the RITH concept is viable. ELI provided design and construction expertise and is currently configured to manufacture the units. This final report for the project provides all of the pertinent and available materials connected to the project including market research studies, the design features and development of the system, and the testing and evaluation conducted at SNL and at a model home test site in Phoenix, Arizona.

Development of engineering program for integrity evaluation of pipes with local wall thinned defects

International Nuclear Information System (INIS)

Park, Chi Yong; Lee, Sung Ho; Kim, Tae Ryong; Park, Sang Kyu

2008-01-01

Integrity evaluation of pipes with local wall thinning by erosion and corrosion is increasingly important in maintenance of wall thinned carbon steel pipes in nuclear power plants. Though a few program for integrity assessment of wall thinned pipes have been developed in domestic nuclear field, however those are limited to straight pipes and methodology proposed in ASME Sec.XI Code Case N-597. Recently, the engineering program for integrity evaluation of pipes with all kinds of local wall defects such as straight, elbow, reducer and branch pipes was developed successfully. The program was designated as PiTEP (Pipe Thinning Evaluation Program), which name was registered as a trademark in the Korea Intellectual Property Office. A developed program is carried out by sequential step of four integrity evaluation methodologies, which are composed of construction code, code case N-597, its engineering method and two developed owner evaluation method. As PiTEP program will be performed through GUI (Graphic User Interface) with user's familiarity, it would be conveniently used by plant engineers with only measured thickness data, basic operation conditions and pipe data

Financial integration and financial development in transition economies: What happens during financial crises?

Directory of Open Access Journals (Sweden)

Igor Masten

2011-12-01

Full Text Available

This paper provides an empirical analysis of the role of financial development and financial integration in the growth dynamics of transition countries. We focus on the role of financial integration in determining the impact of financial development on growth, distinguishing “normal times” from periods of financial crises. In addition to confirming the significant positive effect on growth exerted by financial development and financial integration, our estimates show that a higher degree of financial openness tends to reduce the contractionary effect of financial crises, by cushioning the effect on the domestic supply of credit. Consequently, the high reliance on international capital flows by transition countries does not necessarily increase their financial fragility. This implies that financial protectionism is a self-defeating policy, at least for transition countries.

DEVELOPMENT POLICIES IN ALBA IULIA AREA OF INFLUENCE. AN INTEGRATED APPROACH

Directory of Open Access Journals (Sweden)

S. A. NICULA

2015-06-01

Full Text Available Development Policies in Alba Iulia Area of Influence. An Integrated Approach. The paper represents an integrated and holarchical perspective on the spatial development policies and its component measures and projects related to the City of Alba Iulia, its area of influence and the all-encompassing County of Alba, Romania. The goal was to see how the development and management policies from all levels merge into a single strategic framework that might create a favourable basis for the sustainable growth of Alba Iulia and its area of influence. As this area surrounding the city is subjected to different hierarchical plans and programmes, some that are not properly correlated, it is extremely clear that this area and Areas of Influence in general need legislative stipulations made specifically for them and also a well-thought holarchical planning approach.

25 CFR 39.132 - Can a school integrate Language Development programs into its regular instructional program?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Can a school integrate Language Development programs into... Language Development Programs § 39.132 Can a school integrate Language Development programs into its regular instructional program? A school may offer Language Development programs to students as part of its...

Development Trends And Economic Assessment Of The Integration Processes On The Metals Market

OpenAIRE

Romanova, Olga A.; Makarov, Eduard V.

2018-01-01

The article examines the integration process from the perspective of three dimensions, which characterize the increase in quantity and appearance of new relationships; strength, character and stability of emerging communications; dynamics and the proper form of the process. The authors identify the development trends of the integration processes in the metals market and provide justification for the breaking of the period of Russian metal trading for 1991–2016 into five stages of development....

[Development of integrated support software for clinical nutrition].

Science.gov (United States)

Siquier Homar, Pedro; Pinteño Blanco, Manel; Calleja Hernández, Miguel Ángel; Fernández Cortés, Francisco; Martínez Sotelo, Jesús

2015-09-01

to develop an integrated computer software application for specialized nutritional support, integrated in the electronic clinical record, which detects automatically and early those undernourished patients or at risk of developing undernourishment, determining points of opportunity for improvement and evaluation of the results. the quality standards published by the Nutrition Work Group of the Spanish Society of Hospital Pharmacy (SEFH) and the recommendations by the Pharmacy Group of the Spanish Society of Parenteral and Enteral Nutrition (SENPE) have been taken into account. According to these quality standards, the nutritional support has to include the following healthcare stages or sub-processes: nutritional screening, nutritional assessment, plan for nutritional care, prescription, preparation and administration. this software allows to conduct, in an automated way, a specific nutritional assessment for those patients with nutritional risk, implementing, if necessary, a nutritional treatment plan, conducting follow-up and traceability of outcomes derived from the implementation of improvement actions, and quantifying to what extent our practice is close to the established standard. this software allows to standardize the specialized nutritional support from a multidisciplinary point of view, introducing the concept of quality control per processes, and including patient as the main customer. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Development of integrated support software for clinical nutrition

Directory of Open Access Journals (Sweden)

Pedro Siquier Homar

2015-09-01

Full Text Available Objectives: to develop an integrated computer software application for specialized nutritional support, integrated in the electronic clinical record, which detects automatically and early those undernourished patients or at risk of developing undernourishment, determining points of opportunity for improvement and evaluation of the results. Methods: the quality standards published by the Nutrition Work Group of the Spanish Society of Hospital Pharmacy (SEFH and the recommendations by the Pharmacy Group of the Spanish Society of Parenteral and Enteral Nutrition (SENPE have been taken into account. According to these quality standards, the nutritional support has to include the following healthcare stages or sub-processes: nutritional screening, nutritional assessment, plan for nutritional care, prescription, preparation and administration. Results: this software allows to conduct, in an automated way, a specific nutritional assessment for those patients with nutritional risk, implementing, if necessary, a nutritional treatment plan, conducting follow-up and traceability of outcomes derived from the implementation of improvement actions, and quantifying to what extent our practice is close to the established standard. Conclusions: this software allows to standardize the specialized nutritional support from a multidisciplinary point of view, introducing the concept of quality control per processes, and including patient as the main customer

Erlotinib-induced rash spares previously irradiated skin

International Nuclear Information System (INIS)

Lips, Irene M.; Vonk, Ernest J.A.; Koster, Mariska E.Y.; Houwing, Ronald H.

2011-01-01

Erlotinib is an epidermal growth factor receptor inhibitor prescribed to patients with locally advanced or metastasized non-small cell lung carcinoma after failure of at least one earlier chemotherapy treatment. Approximately 75% of the patients treated with erlotinib develop acneiform skin rashes. A patient treated with erlotinib 3 months after finishing concomitant treatment with chemotherapy and radiotherapy for non-small cell lung cancer is presented. Unexpectedly, the part of the skin that had been included in his previously radiotherapy field was completely spared from the erlotinib-induced acneiform skin rash. The exact mechanism of erlotinib-induced rash sparing in previously irradiated skin is unclear. The underlying mechanism of this phenomenon needs to be explored further, because the number of patients being treated with a combination of both therapeutic modalities is increasing. The therapeutic effect of erlotinib in the area of the previously irradiated lesion should be assessed. (orig.)

Integrating nutrition and early child-development interventions among infants and preschoolers in rural India.

Science.gov (United States)

Fernandez-Rao, Sylvia; Hurley, Kristen M; Nair, Krishnapillai Madhavan; Balakrishna, Nagalla; Radhakrishna, Kankipati V; Ravinder, Punjal; Tilton, Nicholas; Harding, Kimberly B; Reinhart, Greg A; Black, Maureen M

2014-01-01

This article describes the development, design, and implementation of an integrated randomized double-masked placebo-controlled trial (Project Grow Smart) that examines how home/preschool fortification with multiple micronutrient powder (MNP) combined with an early child-development intervention affects child development, growth, and micronutrient status among infants and preschoolers in rural India. The 1-year trial has an infant phase (enrollment age: 6-12 months) and a preschool phase (enrollment age: 36-48 months). Infants are individually randomized into one of four groups: placebo, placebo plus early learning, MNP alone, and MNP plus early learning (integrated intervention), conducted through home visits. The preschool phase is a cluster-randomized trial conducted in Anganwadi centers (AWCs), government-run preschools sponsored by the Integrated Child Development System of India. AWCs are randomized into MNP or placebo, with the MNP or placebo mixed into the children's food. The evaluation examines whether the effects of the MNP intervention vary by the quality of the early learning opportunities and communication within the AWCs. Study outcomes include child development, growth, and micronutrient status. Lessons learned during the development, design, and implementation of the integrated trial can be used to guide large-scale policy and programs designed to promote the developmental, educational, and economic potential of children in developing countries. © 2013 New York Academy of Sciences.

Integrative Analysis of Omics Big Data.

Science.gov (United States)

Yu, Xiang-Tian; Zeng, Tao

2018-01-01

The diversity and huge omics data take biology and biomedicine research and application into a big data era, just like that popular in human society a decade ago. They are opening a new challenge from horizontal data ensemble (e.g., the similar types of data collected from different labs or companies) to vertical data ensemble (e.g., the different types of data collected for a group of person with match information), which requires the integrative analysis in biology and biomedicine and also asks for emergent development of data integration to address the great changes from previous population-guided to newly individual-guided investigations.Data integration is an effective concept to solve the complex problem or understand the complicate system. Several benchmark studies have revealed the heterogeneity and trade-off that existed in the analysis of omics data. Integrative analysis can combine and investigate many datasets in a cost-effective reproducible way. Current integration approaches on biological data have two modes: one is "bottom-up integration" mode with follow-up manual integration, and the other one is "top-down integration" mode with follow-up in silico integration.This paper will firstly summarize the combinatory analysis approaches to give candidate protocol on biological experiment design for effectively integrative study on genomics and then survey the data fusion approaches to give helpful instruction on computational model development for biological significance detection, which have also provided newly data resources and analysis tools to support the precision medicine dependent on the big biomedical data. Finally, the problems and future directions are highlighted for integrative analysis of omics big data.

An Integrated Conceptual Framework for the Development of Asian American Children and Youth.

Science.gov (United States)

Mistry, Jayanthi; Li, Jin; Yoshikawa, Hirokazu; Tseng, Vivian; Tirrell, Jonathan; Kiang, Lisa; Mistry, Rashmita; Wang, Yijie

2016-07-01

The diversity of circumstances and developmental outcomes among Asian American children and youth poses a challenge for scholars interested in Asian American child development. This article addresses the challenge by offering an integrated conceptual framework based on three broad questions: (a) What are theory-predicated specifications of contexts that are pertinent for the development of Asian American children? (b) What are the domains of development and socialization that are particularly relevant? (c) How can culture as meaning-making processes be integrated in conceptualizations of development? The heuristic value of the conceptual model is illustrated by research on Asian American children and youth that examines the interconnected nature of specific features of context, pertinent aspects of development, and interpretive processes. © 2016 The Authors. Child Development © 2016 Society for Research in Child Development, Inc.

Development of core design and analyses technology for integral reactor

Energy Technology Data Exchange (ETDEWEB)

Zee, Sung Quun; Lee, C. C.; Song, J. S. and others

1999-03-01

Integral reactors are developed for the applications such as sea water desalination, heat energy for various industries, and power sources for large container ships. In order to enhance the inherent and passive safety features, low power density concept is chosen for the integral reactor SMART. Moreover, ultra-longer cycle and boron-free operation concepts are reviewed for better plant economy and simple design of reactor system. Especially, boron-free operation concept brings about large difference in core configurations and reactivity controls from those of the existing large size commercial nuclear power plants and also causes many differences in the safety aspects. The ultimate objectives of this study include detailed core design of a integral reactor, development of the core design system and technology, and finally acquisition of the system design certificate. The goal of the first stage is the conceptual core design, that is, to establish the design bases and requirements suitable for the boron-free concept, to develop a core loading pattern, to analyze the nuclear, thermal and hydraulic characteristics of the core and to perform the core shielding design. Interface data for safety and performance analyses including fuel design data are produced for the relevant design analysis groups. Nuclear, thermal and hydraulic, shielding design and analysis code systems necessary for the core conceptual design are established through modification of the existing design tools and newly developed methodology and code modules. Core safety and performance can be improved by the technology development such as boron-free core optimization, advaned core monitoring and operational aid system. Feasiblity study on the improvement of the core protection and monitoring system will also contribute toward core safety and performance. Both the conceptual core design study and the related technology will provide concrete basis for the next design phase. This study will also

Development of core design and analyses technology for integral reactor

International Nuclear Information System (INIS)

Zee, Sung Quun; Lee, C. C.; Song, J. S. and others

1999-03-01

Integral reactors are developed for the applications such as sea water desalination, heat energy for various industries, and power sources for large container ships. In order to enhance the inherent and passive safety features, low power density concept is chosen for the integral reactor SMART. Moreover, ultra-longer cycle and boron-free operation concepts are reviewed for better plant economy and simple design of reactor system. Especially, boron-free operation concept brings about large difference in core configurations and reactivity controls from those of the existing large size commercial nuclear power plants and also causes many differences in the safety aspects. The ultimate objectives of this study include detailed core design of a integral reactor, development of the core design system and technology, and finally acquisition of the system design certificate. The goal of the first stage is the conceptual core design, that is, to establish the design bases and requirements suitable for the boron-free concept, to develop a core loading pattern, to analyze the nuclear, thermal and hydraulic characteristics of the core and to perform the core shielding design. Interface data for safety and performance analyses including fuel design data are produced for the relevant design analysis groups. Nuclear, thermal and hydraulic, shielding design and analysis code systems necessary for the core conceptual design are established through modification of the existing design tools and newly developed methodology and code modules. Core safety and performance can be improved by the technology development such as boron-free core optimization, advaned core monitoring and operational aid system. Feasiblity study on the improvement of the core protection and monitoring system will also contribute toward core safety and performance. Both the conceptual core design study and the related technology will provide concrete basis for the next design phase. This study will also

An Integrated System for Disabled People Developed with the Agent Platform PANGEA

Directory of Open Access Journals (Sweden)

Carolina ZATO

2013-11-01

Full Text Available New trends in multi-agent systems call for self-adaptation and high dynamics, hence the new model of open MAS or virtual organization of agents. However, as existing agent platforms are not yet equipped to support this behavior, it is necessary to create new systems and mechanisms to facilitate the development of these new architectures. This article presents PANGEA, an agent platform to develop open multi-agent systems, specifically those including organizational aspects such as virtual agent organizations. The platform allows the integral management of organizations and offers tools to the end user. Additionally, it includes a communication protocol based on the IRC standard, which facilitates implementation and remains robust even with a large number of connections. The introduction of a CommunicationAgent and a Sniffer make it possible to offer Web Services for the distributed control of interaction. In order to test PANGEA, an integral system was developed to help the disabled, gathering a set of easily deployable and integrated services under a single architecture.

Integrated Computational Materials Engineering (ICME) for Third Generation Advanced High-Strength Steel Development

Energy Technology Data Exchange (ETDEWEB)

Savic, Vesna; Hector, Louis G.; Ezzat, Hesham; Sachdev, Anil K.; Quinn, James; Krupitzer, Ronald; Sun, Xin

2015-06-01

This paper presents an overview of a four-year project focused on development of an integrated computational materials engineering (ICME) toolset for third generation advanced high-strength steels (3GAHSS). Following a brief look at ICME as an emerging discipline within the Materials Genome Initiative, technical tasks in the ICME project will be discussed. Specific aims of the individual tasks are multi-scale, microstructure-based material model development using state-of-the-art computational and experimental techniques, forming, toolset assembly, design optimization, integration and technical cost modeling. The integrated approach is initially illustrated using a 980 grade transformation induced plasticity (TRIP) steel, subject to a two-step quenching and partitioning (Q&P) heat treatment, as an example.

Integrating uncertainty into public energy research and development decisions

Science.gov (United States)

Anadón, Laura Díaz; Baker, Erin; Bosetti, Valentina

2017-05-01

Public energy research and development (R&D) is recognized as a key policy tool for transforming the world's energy system in a cost-effective way. However, managing the uncertainty surrounding technological change is a critical challenge for designing robust and cost-effective energy policies. The design of such policies is particularly important if countries are going to both meet the ambitious greenhouse-gas emissions reductions goals set by the Paris Agreement and achieve the required harmonization with the broader set of objectives dictated by the Sustainable Development Goals. The complexity of informing energy technology policy requires, and is producing, a growing collaboration between different academic disciplines and practitioners. Three analytical components have emerged to support the integration of technological uncertainty into energy policy: expert elicitations, integrated assessment models, and decision frameworks. Here we review efforts to incorporate all three approaches to facilitate public energy R&D decision-making under uncertainty. We highlight emerging insights that are robust across elicitations, models, and frameworks, relating to the allocation of public R&D investments, and identify gaps and challenges that remain.

Ethical Responsibility of Governance for Integrating Disaster Risk Reduction with Development

Science.gov (United States)

Parkash Gupta, Surya

2015-04-01

The development in the public as well as the private sectors is controlled and regulated, directly or indirectly by the governments at federal, provincial and local levels. If this development goes haphazard and unplanned, without due considerations to environmental constraints and potential hazards; it is likely to cause disasters or may get affected by disasters. Therefore, it becomes an ethical responsibility of the people involved in governance sector to integrate disaster risk reduction with development in their administrative territories through enforcement of appropriate policies, guidelines and regulatory mechanisms. Such mechanisms should address the social, scientific, economic, environmental, and legal requirements that play significant role in planning, implementation of developmental activities as well as disaster management. The paper focuses on defining the ethical responsibilities for the governance sector for integrating disaster risk reduction with development. It highlights the ethical issues with examples from two case studies, one from the Uttarakhand state and the other Odhisa state in India. The case studies illustrates how does it make a difference in disaster risk reduction if the governments own or do not own ethical responsibilities. The paper considers two major disaster events, flash floods in Uttarakhand state and Cyclone Phailin in Odhisa state, that happened during the year 2013. The study points out that it makes a great difference in terms of consequences and response to disasters when ethical responsibilities are owned by the governance sector. The papers attempts to define these ethical responsibilities for integrating disaster risk reduction with development so that the governments can be held accountable for their acts or non-actions.

Integrated development planning in South Africa: lessons for international peacebuiling?

CSIR Research Space (South Africa)

Gueli, R

2007-01-01

Full Text Available to overcome Apartheid’s violent history, deserves closer scrutiny by international peacebuilding experts. This is because South Africa’s approach to development – although not perfect – is centred on integrated governance and has, to some extent, played...

A Web-Based Integration Procedure for the Development of Reconfigurable Robotic Work-Cells

OpenAIRE

Paulo Ferreira; Victoria Reyes; João Mestre

2013-01-01

Concepts related to the development of reconfigurable manufacturing systems (RMS) and methodologies to provide the best practices in the processing industry and factory automation, such as system integration and web-based technology, are major issues in designing next-generation manufacturing systems (NGMS). Adaptable and integrable devices are crucial for the success of NGMS. In robotic cells the integration of manufacturing components is essential to accelerate system adaptability. Sensors,...

A calderón multiplicative preconditioner for the combined field integral equation

KAUST Repository

Bagci, Hakan; Andriulli, Francesco P.; Cools, Kristof; Olyslager, Femke; Michielssen, Eric

2009-01-01

A Calderón multiplicative preconditioner (CMP) for the combined field integral equation (CFIE) is developed. Just like with previously proposed Caldern-preconditioned CFIEs, a localization procedure is employed to ensure that the equation

Development of an Online and Offline Integration Hypothesis for Healthy Internet Use: Theory and Preliminary Evidence

Directory of Open Access Journals (Sweden)

Xiaoyan Lin

2018-04-01

Full Text Available The Internet has become an integral part of our daily life, and how to make the best use of the Internet is important to both individuals and the society. Based on previous studies, an Online and Offline Integration Hypothesis is proposed to suggest a framework for considering harmonious and balanced Internet use. The Integration Hypothesis proposes that healthier patterns of Internet usage may be achieved through harmonious integration of people’s online and offline worlds. An online/offline integration is proposed to unite self-identity, interpersonal relationships, and social functioning with both cognitive and behavioral aspects by following the principles of communication, transfer, consistency, and “offline-first” priorities. To begin to test the hypothesis regarding the relationship between integration level and psychological outcomes, data for the present study were collected from 626 undergraduate students (41.5% males. Participants completed scales for online and offline integration, Internet addiction, pros and cons of Internet use, loneliness, extraversion, and life satisfaction. The findings revealed that subjects with higher level of online/offline integration have higher life satisfaction, greater extraversion, and more positive perceptions of the Internet and less loneliness, lower Internet addiction, and fewer negative perceptions of the Internet. Integration mediates the link between extraversion and psychological outcomes, and it may be the mechanism underlying the difference between the “rich get richer” and social compensation hypotheses. The implications of the online and offline integration hypothesis are discussed.

Development of an Online and Offline Integration Hypothesis for Healthy Internet Use: Theory and Preliminary Evidence.

Science.gov (United States)

Lin, Xiaoyan; Su, Wenliang; Potenza, Marc N

2018-01-01

The Internet has become an integral part of our daily life, and how to make the best use of the Internet is important to both individuals and the society. Based on previous studies, an Online and Offline Integration Hypothesis is proposed to suggest a framework for considering harmonious and balanced Internet use. The Integration Hypothesis proposes that healthier patterns of Internet usage may be achieved through harmonious integration of people's online and offline worlds. An online/offline integration is proposed to unite self-identity, interpersonal relationships, and social functioning with both cognitive and behavioral aspects by following the principles of communication, transfer, consistency, and "offline-first" priorities. To begin to test the hypothesis regarding the relationship between integration level and psychological outcomes, data for the present study were collected from 626 undergraduate students (41.5% males). Participants completed scales for online and offline integration, Internet addiction, pros and cons of Internet use, loneliness, extraversion, and life satisfaction. The findings revealed that subjects with higher level of online/offline integration have higher life satisfaction, greater extraversion, and more positive perceptions of the Internet and less loneliness, lower Internet addiction, and fewer negative perceptions of the Internet. Integration mediates the link between extraversion and psychological outcomes, and it may be the mechanism underlying the difference between the "rich get richer" and social compensation hypotheses. The implications of the online and offline integration hypothesis are discussed.

Development of an Online and Offline Integration Hypothesis for Healthy Internet Use: Theory and Preliminary Evidence

Science.gov (United States)

Lin, Xiaoyan; Su, Wenliang; Potenza, Marc N.

2018-01-01

The Internet has become an integral part of our daily life, and how to make the best use of the Internet is important to both individuals and the society. Based on previous studies, an Online and Offline Integration Hypothesis is proposed to suggest a framework for considering harmonious and balanced Internet use. The Integration Hypothesis proposes that healthier patterns of Internet usage may be achieved through harmonious integration of people’s online and offline worlds. An online/offline integration is proposed to unite self-identity, interpersonal relationships, and social functioning with both cognitive and behavioral aspects by following the principles of communication, transfer, consistency, and “offline-first” priorities. To begin to test the hypothesis regarding the relationship between integration level and psychological outcomes, data for the present study were collected from 626 undergraduate students (41.5% males). Participants completed scales for online and offline integration, Internet addiction, pros and cons of Internet use, loneliness, extraversion, and life satisfaction. The findings revealed that subjects with higher level of online/offline integration have higher life satisfaction, greater extraversion, and more positive perceptions of the Internet and less loneliness, lower Internet addiction, and fewer negative perceptions of the Internet. Integration mediates the link between extraversion and psychological outcomes, and it may be the mechanism underlying the difference between the “rich get richer” and social compensation hypotheses. The implications of the online and offline integration hypothesis are discussed. PMID:29706910

INTAROS: Development of an integrated Arctic observation system under Horizon 2020

Science.gov (United States)

Beszczynska-Möller, Agnieszka; Sandven, Stein; Sagen, Hanne

2017-04-01

INTAROS is a research and innovation action funded under the H2020-BG-09 call for the five-year period 2016-2021. INTAROS will develop an integrated Arctic Observation System (iAOS) by extending, improving and unifying existing systems in the different regions of the Arctic. INTAROS will have a strong multidisciplinary focus, with tools for integration of data from atmosphere, ocean, cryosphere and terrestrial sciences, provided by institutions in Europe, North America and Asia. Satellite earth observation (EO) data plays an increasingly important role in such observing systems, because the amount of EO data for observing the global climate and environment grows year by year. EO data will therefore be integrated into iAOS based on existing products and databases. In situ observing systems are much more limited due to logistical constraints and cost limitations. The sparseness of in situ data is therefore the largest gap in the overall observing system. INTAROS will assess strengths and weaknesses of existing Arctic observing systems and contribute with innovative solutions to fill some of the critical gaps in the selected networks. INTAROS will develop a platform, iAOS, to search for and access data from distributed databases. The evolution into a sustainable Arctic observing system requires coordination, mobilization and cooperation between the existing European and international infrastructures (in-situ and remote, including space-based), the modeling communities and relevant stakeholder groups. INTAROS will include development of community-based observing systems, where local knowledge is merged with scientific data. Multidisciplinary data integrated under INTAROS will contribute to better understanding of interactions and coupling in the complex Arctic ice-ocean-land-atmosphere system. An integrated Arctic Observation System will enable better-informed decisions and better-documented processes within key sectors (e.g. local communities, shipping, tourism

UAS Integration in the NAS Project: Integrated Test and Evaluation (IT&E) Flight Test 3. Revision E

Science.gov (United States)

Marston, Michael

2015-01-01

The desire and ability to fly Unmanned Aircraft Systems (UAS) in the National Airspace System (NAS) is of increasing urgency. The application of unmanned aircraft to perform national security, defense, scientific, and emergency management are driving the critical need for less restrictive access by UAS to the NAS. UAS represent a new capability that will provide a variety of services in the government (public) and commercial (civil) aviation sectors. The growth of this potential industry has not yet been realized due to the lack of a common understanding of what is required to safely operate UAS in the NAS. NASA's UAS Integration into the NAS Project is conducting research in the areas of Separation Assurance/Sense and Avoid Interoperability, Human Systems Integration (HSI), and Communication to support reducing the barriers of UAS access to the NAS. This research is broken into two research themes namely, UAS Integration and Test Infrastructure. UAS Integration focuses on airspace integration procedures and performance standards to enable UAS integration in the air transportation system, covering Sense and Avoid (SAA) performance standards, command and control performance standards, and human systems integration. The focus of Test Infrastructure is to enable development and validation of airspace integration procedures and performance standards, including the integrated test and evaluation. In support of the integrated test and evaluation efforts, the Project will develop an adaptable, scalable, and schedulable relevant test environment capable of evaluating concepts and technologies for unmanned aircraft systems to safely operate in the NAS. To accomplish this task, the Project will conduct a series of Human-in-the-Loop and Flight Test activities that integrate key concepts, technologies and/or procedures in a relevant air traffic environment. Each of the integrated events will build on the technical achievements, fidelity and complexity of the previous tests and

Lack of integration governance in ERP development: a case study on causes and effects

Science.gov (United States)

Kähkönen, Tommi; Smolander, Kari; Maglyas, Andrey

2017-09-01

The development of an enterprise resource planning (ERP) system starts actually after it has been implemented and taken into use. It is necessary to integrate ERP with other business information systems inside and outside the company. With the grounded theory, we aim to understand how integration challenges emerged in a large manufacturing enterprise when the long-term ERP system reached the beginning of its retirement. Structural changes, an information technology governance model, lack of organisational vision, having no architectural descriptions, lack of collaboration, cost cutting, and organisational culture made integration governance troublesome. As a consequence, the enterprise suffered from several undesired effects, such as complex integration scenarios between internal systems, and failing to provide its customers the needed information. The reduction of costs strengthened the organisational silos further and led to unrealised business process improvements. We provide practitioners with four recommendations. First, the organisational goals for integration should be exposed. Second, when evaluating the needs and impacts of integration, a documented architectural description about the system landscape needs to be utilised. Third, the role of IT should be emphasised in development decision-making, and fourth, collaboration is the core ingredient for successful integration governance.

One- and two-center ETF-integrals of first order in relativistic calculation of NMR parameters

Science.gov (United States)

Slevinsky, R. M.; Temga, T.; Mouattamid, M.; Safouhi, H.

2010-06-01

The present work focuses on the analytical and numerical developments of first-order integrals involved in the relativistic calculation of the shielding tensor using exponential-type functions as a basis set of atomic orbitals. For the analytical development, we use the Fourier integral transformation and practical properties of spherical harmonics and the Rayleigh expansion of the plane wavefunctions. The Fourier transforms of the operators were derived in previous work and they are used for analytical development. In both the one- and two-center integrals, Cauchy's residue theorem is used in the final developments of the analytical expressions, which are shown to be accurate to machine precision.

One- and two-center ETF-integrals of first order in relativistic calculation of NMR parameters

Energy Technology Data Exchange (ETDEWEB)

Slevinsky, R M; Temga, T; Mouattamid, M; Safouhi, H, E-mail: hassan.safouhi@ualberta.c [Mathematical Section, Campus Saint-Jean, University of Alberta, 8406, 91 Street, Edmonton, Alberta T6C 4G9 (Canada)

2010-06-04

The present work focuses on the analytical and numerical developments of first-order integrals involved in the relativistic calculation of the shielding tensor using exponential-type functions as a basis set of atomic orbitals. For the analytical development, we use the Fourier integral transformation and practical properties of spherical harmonics and the Rayleigh expansion of the plane wavefunctions. The Fourier transforms of the operators were derived in previous work and they are used for analytical development. In both the one- and two-center integrals, Cauchy's residue theorem is used in the final developments of the analytical expressions, which are shown to be accurate to machine precision.

The development and validation of a numerical integration method for non-linear viscoelastic modeling

Science.gov (United States)

Ramo, Nicole L.; Puttlitz, Christian M.

2018-01-01

Compelling evidence that many biological soft tissues display both strain- and time-dependent behavior has led to the development of fully non-linear viscoelastic modeling techniques to represent the tissue’s mechanical response under dynamic conditions. Since the current stress state of a viscoelastic material is dependent on all previous loading events, numerical analyses are complicated by the requirement of computing and storing the stress at each step throughout the load history. This requirement quickly becomes computationally expensive, and in some cases intractable, for finite element models. Therefore, we have developed a strain-dependent numerical integration approach for capturing non-linear viscoelasticity that enables calculation of the current stress from a strain-dependent history state variable stored from the preceding time step only, which improves both fitting efficiency and computational tractability. This methodology was validated based on its ability to recover non-linear viscoelastic coefficients from simulated stress-relaxation (six strain levels) and dynamic cyclic (three frequencies) experimental stress-strain data. The model successfully fit each data set with average errors in recovered coefficients of 0.3% for stress-relaxation fits and 0.1% for cyclic. The results support the use of the presented methodology to develop linear or non-linear viscoelastic models from stress-relaxation or cyclic experimental data of biological soft tissues. PMID:29293558

Current state and problems of integrated development of mineral resources base in Russia

Science.gov (United States)

Filimonova, I. V.; Eder, L. V.; Mishenin, M. V.; Mamakhatov, T. M.

2017-09-01

The article deals with the issues of integrated development of subsoil resources taking into account the actual problems facing the Russian oil and gas complex. The key factors determining the need for integrated development of subsoil resources have been systematized and investigated. These factors are the change of the hydrocarbon resource base quality, the improvement of the depletion degree of basic (unique and major) oil fields, the increase in the number of small and smallest oil fields discovered and introduced into development, the increased capital intensity and the riskiness of geological exploration, and the territorial location of new subsoil use facilities.

Development of a totally integrated severe accident training system

International Nuclear Information System (INIS)

Kim, Ko Ryu; Park, Sun Hee; Choi, Young; Kim, Dong Ha

2006-01-01

Recently KAERI has developed the severe accident management guidance to establish the Korea standard severe accident management system. On the other hand the PC-based severe accident training simulator SATS has been developed, which uses the MELCOR code as the simulation engine. The simulator SATS graphically displays and simulates the severe accidents with interactive user commands. Especially the control capability of SATS could make a severe accident training course more interesting and effective. In this paper we will describe the development and functions of the electrical guidance module, HyperKAMG, and the SATS-HyperKAMG linkage system designed for a totally integrated and automated severe accident training. (author)

Electricity and heat system development scenarios integrated in the energy system sustainable development in Romania in the period 2005 - 2025

International Nuclear Information System (INIS)

Marin, Otilia; Leca, Aureliu

2004-01-01

After 50 years of centralized economy, since 1989, Romania faces many challenges related to the internal conditions and to the new trends in energy markets over the world as: the existing low efficiency and availability, fast structural changes; the decentralization and privatization of the energy sector with new structures and entities; integration in EU and NATO structures. At present, with transition from the national vertical integrated monopolies to an open market, the determination of the global optimum development scenario of the power and heat sector becomes more important in order to find the policy which can lead the own strategies of different companies involved on market to a sustainable development of the society. The paper presents four long term development scenarios of the electricity and heat sector quantified from different points of view: technical, economical, environmental, social criteria, security of supply, risk diminishing etc and it continues by determining the long term global optimum development scenario integrated in the sustainable energy system. (authors)

Problems of Development and Integration of the Securities Market in the Countries of the EAEU

Directory of Open Access Journals (Sweden)

Ashot Bayadyan

2017-12-01

Full Text Available The article is devoted to studying problems associated with the development and integration of the securities market in the countries of the Eurasian Economic Union. The article examines the present state, possibilities and problems pertaining to the development of the securities market and, in particular, the regulated market. The development and integration of the securities market is an important factor affecting the potential for economic development and sustainable economic growth in the countries of the Eurasian Economic Union. The subject of this study is the development and integration problems affecting the securities market in the countries of the Eurasian Economic Union. The securities market in the countries of the Eurasian Economic Union has sufficient integration opportunities. Potential exists in all segments of the securities market, but more opportunities exist in the debt securities market. The deepening of the integration processes in the securities market of the countries of the Eurasian Economic Union could have a positive impact on increasing the investment opportunities of the economies of these countries. This, in turn, can have a positive impact on the growth of the gross domestic product, reducing unemployment and improving the social status of the population. However, the creation of a single or integrated exchange market should be accompanied by the integration of depository processes as well as the settlement and clearing systems, and the synchronizing of the regulatory and legal framework governing the securities market. Particular attention is required to study the problems associated with fixing and transferring property rights to the securities and protecting the interests of investors. The integration processes of depository, settlement and clearing systems may include the introduction of a nominee holder for central depositories and the establishment of correspondent relations between the central depositories

Professional Development Recognizing Technology Integration Modeled after the TPACK Framework

Science.gov (United States)

McCusker, Laura

2017-01-01

Public school teachers within a Pennsylvania intermediate unit are receiving inadequate job-embedded professional development that recognizes knowledge of content, pedagogy, and technology integration, as outlined by Mishra and Koehler's Technological Pedagogical Content Knowledge (TPACK) framework (2006). A school environment where teachers are…

[Holistic integrative medicine: the road to the future of the development of burn medicine].

Science.gov (United States)

Fan, D M

2017-01-20

Holistic integrative medicine is the road to the future of the development of burn medicine. Not only burn medicine, but also human medicine gradually enters the era of holistic integrative medicine. Holistic integrative medicine is different from translational medicine, evidence-based medicine or precision medicine, which integrates the most advanced knowledge and theories in medicine fields with the most effective practices and experiences in clinical specialties to form a new medical system.

Fostering Integrity in Research

Science.gov (United States)

McNutt, M. K.

2017-12-01

The responsible conduct of research requires that all involved in the research enterprise - researchers, sponsors, reviewers, publishers, and communicators - adhere to a set of integrity principles to protect the public's investment. Given the increasing complexity and globalization of the research enterprise, the National Academies recently re-examined and updated its integrity recommendations for researchers in the report Fostering Integrity in Research, with sponsorship from the National Science Foundation. Major departures from the previous recommendations 25-years earlier are the recognition that practices that were previously classified as merely questionable are indeed detrimental to the responsible conduct of research. Furthermore, the report concludes that there has been insufficient effort to respond to the threats that lapses in research integrity pose to the quality of research products and the reputation of researchers as deserving of the public trust. It recommends the creation of an independent, non-profit entity dedicated to promoting research integrity by serving as a resource and clearing house for expertise, advice, materials, and best practices on fostering research integrity and responding to allegations of research misconduct.

Product development for catering - how to integrate issues on nutrition, quality and environment in the products

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

1996-01-01

Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector......Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector...

Discrete nodal integral transport-theory method for multidimensional reactor physics and shielding calculations

International Nuclear Information System (INIS)

Lawrence, R.D.; Dorning, J.J.

1980-01-01

A coarse-mesh discrete nodal integral transport theory method has been developed for the efficient numerical solution of multidimensional transport problems of interest in reactor physics and shielding applications. The method, which is the discrete transport theory analogue and logical extension of the nodal Green's function method previously developed for multidimensional neutron diffusion problems, utilizes the same transverse integration procedure to reduce the multidimensional equations to coupled one-dimensional equations. This is followed by the conversion of the differential equations to local, one-dimensional, in-node integral equations by integrating back along neutron flight paths. One-dimensional and two-dimensional transport theory test problems have been systematically studied to verify the superior computational efficiency of the new method

The Multi-User Droplet Combustion Apparatus: the Development and Integration Concept for Droplet Combustion Payloads in the Fluids and Combustion Facility Combustion Integrated Rack

Science.gov (United States)

Myhre, C. A.

2002-01-01

The Multi-user Droplet Combustion Apparatus (MDCA) is a multi-user facility designed to accommodate four different droplet combustion science experiments. The MDCA will conduct experiments using the Combustion Integrated Rack (CIR) of the NASA Glenn Research Center's Fluids and Combustion Facility (FCF). The payload is planned for the International Space Station. The MDCA, in conjunction with the CIR, will allow for cost effective extended access to the microgravity environment, not possible on previous space flights. It is currently in the Engineering Model build phase with a planned flight launch with CIR in 2004. This paper provides an overview of the capabilities and development status of the MDCA. The MDCA contains the hardware and software required to conduct unique droplet combustion experiments in space. It consists of a Chamber Insert Assembly, an Avionics Package, and a multiple array of diagnostics. Its modular approach permits on-orbit changes for accommodating different fuels, fuel flow rates, soot sampling mechanisms, and varying droplet support and translation mechanisms to accommodate multiple investigations. Unique diagnostic measurement capabilities for each investigation are also provided. Additional hardware provided by the CIR facility includes the structural support, a combustion chamber, utilities for the avionics and diagnostic packages, and the fuel mixing capability for PI specific combustion chamber environments. Common diagnostics provided by the CIR will also be utilized by the MDCA. Single combustible fuel droplets of varying sizes, freely deployed or supported by a tether are planned for study using the MDCA. Such research supports how liquid-fuel-droplets ignite, spread, and extinguish under quiescent microgravity conditions. This understanding will help us develop more efficient energy production and propulsion systems on Earth and in space, deal better with combustion generated pollution, and address fire hazards associated with

The Mastery Matrix for Integration Praxis: The development of a rubric for integration practice in addressing weight-related public health problems.

Science.gov (United States)

Berge, Jerica M; Adamek, Margaret; Caspi, Caitlin; Grannon, Katherine Y; Loth, Katie A; Trofholz, Amanda; Nanney, Marilyn S

2018-06-01

In response to the limitations of siloed weight-related intervention approaches, scholars have called for greater integration that is intentional, strategic, and thoughtful between researchers, health care clinicians, community members, and policy makers as a way to more effectively address weight and weight-related (e.g., obesity, diabetes, cardiovascular disease, cancer) public health problems. The Mastery Matrix for Integration Praxis was developed by the Healthy Eating and Activity across the Lifespan (HEAL) team in 2017 to advance the science and praxis of integration across the domains of research, clinical practice, community, and policy to address weight-related public health problems. Integrator functions were identified and developmental stages were created to generate a rubric for measuring mastery of integration. Creating a means to systematically define and evaluate integration praxis and expertise will allow for more individuals and teams to master integration in order to work towards promoting a culture of health. Copyright © 2018 Elsevier Inc. All rights reserved.

Islam - Science Integration Approach in Developing Chemistry Individualized Education Program (IEP for Students with Disabilities

Directory of Open Access Journals (Sweden)

Jamil Suprihatiningrum

2017-11-01

Full Text Available The paper is based on a research which tries to explore, explain and describe Islam - science integration approach to develop an Individualized Education Program (IEP for students with disabilities in chemistry lesson. As a qualitative case study, this paper is aimed at investigating how Islam - science integration approach can be underpinned for developing the IEP for Chemistry. Participants were recruited purposively and data were collected by interviews; documents’ analysis; and experts’ assessment (i.e. material experts, inclusive education experts, media experts, chemistry teachers and support teachers, then analyzed using content-analysis. The result shows Islam - science integration approach can be a foundation to develop the chemistry IEP by seeking support for the verses of the Qur'an and corresponding hadiths. Even although almost all the subject matter in chemistry can be integrated with Islamic values, this study only developed two contents, namely Periodic System of Elements and Reaction Rate.

Development of integrated radioactive waste packaging and conditioning solutions in the UK

Energy Technology Data Exchange (ETDEWEB)

Sibley, Peter; Butter, Kevin; Zimmerman, Ian [EnergySolutions EU Ltd., Swindon, Wiltshire (United Kingdom); Viermann, Joerg [GNS Gesellschaft fur Nuklear-Service mbH, Essen (Germany); Messer, Matthias [GNS Gesellschaft fur Nuklear-Service mbH, Bristol (United Kingdom)

2013-07-01

In order to offer a more cost effective, safer and efficient Intermediate Level Waste (ILW) management service, EnergySolutions EU Ltd. and Gesellschaft fur Nuklear-Service mbH (GNS) have been engaged in the development of integrated radioactive waste retrieval, packaging and conditioning solutions in the UK. Recognising the challenges surrounding regulatory endorsement and on-site implementation in particular, this has resulted in an alternative approach to meeting customer, safety regulator and disposability requirements. By working closely with waste producers and the organisation(s) responsible for endorsing radioactive waste management operations in the UK, our proposed solutions are now being implemented. By combining GNS' off-the-shelf, proven Ductile Cast Iron Containers (DCICs) and water removal technologies, with EnergySolutions EU Ltd.'s experience and expertise in waste retrieval, safety case development and disposability submissions, a fully integrated service offering has been developed. This has involved significant effort to overcome technical challenges such as onsite equipment deployment, active commissioning, conditioning success criteria and disposability acceptance. Our experience in developing such integrated solutions has highlighted the importance of working in collaboration with all parties to achieve a successful and viable outcome. Ultimately, the goal is to ensure reliable, safe and effective delivery of waste management solutions. (authors)

Implementation of Synchronous Micromotor in Developing Integrated Microfluidic Systems

Directory of Open Access Journals (Sweden)

Ala'aldeen Al-Halhouli

2014-07-01

Full Text Available This paper introduces the synchronous micromotor concept and presents new investigations on its application as an integrated driving mechanism in microfluidic systems. A spiral channel viscous micropump and a microstirrer are considered and tested as examples to verify the concept. The fabrication technology of such integrated systems is based on UV depth lithography, electroplating and soft lithography. The synchronous micromotor consists of a stator including double layer coils, and a rotor disk containing alternate permanent magnets. The coils are distributed evenly around the stator and arranged in three phases. The phases are excited by sinusoidal currents with a corresponding phase shift resulting in a rotating magnetic field. Regarding the spiral channel viscous micropump, a spiral disk was fixed onto the rotor disk and run at different rotational speeds. Tests showed very promising results, with a flow rate up to 1023 µL·min−1 at a motor rotational speed of 4500 rpm. Furthermore, for the application of a microstirred-tank bioreactor, the rotor disk design was modified to work as a stirrer. The performance of the developed microbioreactor was tested over a time period of approximately 10 h under constant stirring. Tests demonstrated the successful cultivation of S. cerevisiae through the integration of the microstirrer in a microbioreactor system. These systems prove that synchronous micromotors are well suited to serve as integrated driving mechanisms of active microfluidic components.

Conceptual aspects: analyses law, ethical, human, technical, social factors of development ICT, e-learning and intercultural development in different countries setting out the previous new theoretical model and preliminary findings

NARCIS (Netherlands)

Kommers, Petrus A.M.; Smyrnova-Trybulska, Eugenia; Morze, Natalia; Issa, Tomayess; Issa, Theodora

2015-01-01

This paper, prepared by an international team of authors focuses on the conceptual aspects: analyses law, ethical, human, technical, social factors of ICT development, e-learning and intercultural development in different countries, setting out the previous and new theoretical model and preliminary

The integrated reporting: A presentation of the current state of art and aspects of integrated reporting that need further development

Directory of Open Access Journals (Sweden)

Jordi Morros

2016-02-01

Full Text Available Purpose: The purpose of this paper is to synthesise what is the emerging field of integrated reporting, with particular emphasis in the International Integrated Reporting Council, and outline a list of items for future research in this area. Design/methodology/approach: The approach is to outline a presentation of integrated reporting (IR, and make a review of the implications for the research agenda of the most important items. Findings: The need for quality researchers to address a number of pressing challenges posed by the rapid development of IR policies and practices. Research limitations/implications: The paper provide insights into issues and aspects of integrated reporting that need further development and need robust evidence to help inform improvements in policy and practice. Practical implications: Highlight how companies may benefit from integrated reporting in response to stakeholders’ calls for enhanced disclosure of environmental, social, governance and other non financial information. Social implications: The main social implication is to promote the wider public interest of improving the relevance of information for decision-making, for all stakeholders, and allow greater efficiency in the allocation of financial and other resources and in adding public value Originality/value: This paper offers a general view on a subject that is a challenge for entities oriented to the implementation of sustainability in their values and also in their reporting.

Integrative Technologies Complicate Communication during Development Work Context: Industry-Academy Collaboration

Directory of Open Access Journals (Sweden)

Pauliina Mansikkamäki

2007-06-01

Full Text Available A competition in the electronics industry is hard. For most companies, strong technological know-how will be a competitiveness factor in the future. The future technologies will be increasingly based on a combination of innovations from several branches of science. Also, many innovations are based on external technology integration. The days are over when one company could internally create all of the technology it needs to maintain its competitiveness. One approach of promising framework for the development of a new integrative technology is an industrial R&D network combined with industrial-academic collaboration. However, this kind of collaboration is a challenging undertaking. Companies in a value network might have very different expectations regarding a new technology due to differences in their position in the value network or their company strategy. One of the main challenges in an R&D network is to translate the expectations of all parties involved into new technology solutions so that all in the R&D network feel they have obtained benefit. One of key factors on creating successful industrial-academic collaboration is open and trustful communication. But, there are communication challenges, intellectual property sharing problems, and discussions regarding the sharing of cost and benefits. Developing a new integrative technology structure requires seamless teamwork, holistic and interdisciplinary understanding, and open communication throughout the R&D team and the industrial-academic network. The focus of this paper is on network communication, knowledge communication and team communication. The results of this study indicate that successful communication in an industrial-academic R&D network to develop a new integrative technology improves knowledge creation and accelerates commercialization of the technology.

The development of integrated diabetes care in the Netherlands: a multiplayer self-assessment analysis.

Science.gov (United States)

Zonneveld, Nick; Vat, Lidewij E; Vlek, Hans; Minkman, Mirella M N

2017-03-21

Since recent years Dutch diabetes care has increasingly focused on improving the quality of care by introducing the concept of care groups (in Dutch: 'zorggroepen'), care pathways and improving cooperation with involved care professionals and patients. This study examined how participating actors in care groups assess the development of their diabetes services and the differences and similarities between different stakeholder groups. A self-evaluation study was performed within 36 diabetes care groups in the Netherlands. A web-based self-assessment instrument, based on the Development Model for Integrated Care (DMIC), was used to collect data among stakeholders of each care group. The DMIC defines nine clusters of integrated care and four phases of development. Statistical analysis was used to analyze the data. Respondents indicated that the diabetes care groups work together in well-organized multidisciplinary teams and there is clarity about one another's expertise, roles and tasks. The care groups can still develop on elements related to the management and monitoring of performance, quality of care and patient-centeredness. The results show differences (p < 0.01) between three stakeholders groups in how they assess their integrated care services; (1) core players, (2) managers/directors/coordinators and (3) players at a distance. Managers, directors and coordinators assessed more implemented integrated care activities than the other two stakeholder groups. This stakeholder group also placed their care groups in a further phase of development. Players at a distance assessed significantly less present elements and assessed their care group as less developed. The results show a significant difference between stakeholder groups in the assessment of diabetes care practices. This reflects that the professional disciplines and the roles of stakeholders influence the way they asses the development of their integrated care setting, or that certain stakeholder groups

Integrating the results of user research into medical device development: insights from a case study.

Science.gov (United States)

Martin, Jennifer L; Barnett, Julie

2012-07-19

It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision making processes may assist manufacturers to take a more integrated and

Integrating the results of user research into medical device development: insights from a case study

Directory of Open Access Journals (Sweden)

Martin Jennifer L

2012-07-01

Full Text Available Abstract Background It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. Methods A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. Results A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. Conclusion There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision

Development of an Integrated Education/Training based Nuclear Outreach Model

International Nuclear Information System (INIS)

Han, Kyongwon; Nam, Youngmi; Hwang, Ina; Lee, Jisuk; Ko, Hansuk; Lee, Taejoon

2013-01-01

The Korean nuclear community also recognizes the importance of outreach from its experience with rad waste and nuclear power programs. Accordingly, nationwide programs dealing with public information, support for local community development, and HRD are implemented continuously involving a number of organizations concerned. The Nuclear Training and Education Center (NTC) of the Korea Atomic Energy Research Institute (KAERI), with its unique function and capability as a national research organization, has needs for the enhancement of public acceptance for KAERI programs, a better contribution to the national effort, and addressing the emerging needs for international education/training on nuclear outreach. This paper presents an integrated education/training based nuclear outreach model with a set of reference program, which is developed for NTC. An integrated education/training based nuclear outreach model for NTC is developed addressing the increasing needs for public acceptance on the peaceful use of nuclear energy, in terms of supporting KAERI activities, contributing to the national nuclear outreach efforts, and promoting international education and training on nuclear outreach. The model, harmonized with the national nuclear outreach system, consists of objectives, target audiences, a set of reference program supported by infrastructure and networking, and an evaluation system. The program is further specified into sub-programs with detailed design for the respective audiences. The developed model with a reference program is characterized by its integrity in terms of encompassing the whole outreach process cycle, and setting up of a target audience based total program structure with existing and new sub-programs. Also, it intends to be sustainable by addressing future generations' needs as well as innovative in the program delivery. The model will be continuously upgraded and applied addressing respective needs of the audiences

Development of an Integrated Education/Training based Nuclear Outreach Model

Energy Technology Data Exchange (ETDEWEB)

Han, Kyongwon; Nam, Youngmi; Hwang, Ina; Lee, Jisuk; Ko, Hansuk; Lee, Taejoon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

The Korean nuclear community also recognizes the importance of outreach from its experience with rad waste and nuclear power programs. Accordingly, nationwide programs dealing with public information, support for local community development, and HRD are implemented continuously involving a number of organizations concerned. The Nuclear Training and Education Center (NTC) of the Korea Atomic Energy Research Institute (KAERI), with its unique function and capability as a national research organization, has needs for the enhancement of public acceptance for KAERI programs, a better contribution to the national effort, and addressing the emerging needs for international education/training on nuclear outreach. This paper presents an integrated education/training based nuclear outreach model with a set of reference program, which is developed for NTC. An integrated education/training based nuclear outreach model for NTC is developed addressing the increasing needs for public acceptance on the peaceful use of nuclear energy, in terms of supporting KAERI activities, contributing to the national nuclear outreach efforts, and promoting international education and training on nuclear outreach. The model, harmonized with the national nuclear outreach system, consists of objectives, target audiences, a set of reference program supported by infrastructure and networking, and an evaluation system. The program is further specified into sub-programs with detailed design for the respective audiences. The developed model with a reference program is characterized by its integrity in terms of encompassing the whole outreach process cycle, and setting up of a target audience based total program structure with existing and new sub-programs. Also, it intends to be sustainable by addressing future generations' needs as well as innovative in the program delivery. The model will be continuously upgraded and applied addressing respective needs of the audiences.

[Promoting Research Integrity].

Science.gov (United States)

Suzuki, Hiromichi

2018-01-01

　Japan Agency for Medical Research and Development (AMED) was launched in April 2015 to promote integrated medical research and development (R&D) ranging from basic research to practical applications, in order to smoothly achieve the nationwide application of research outcomes, and to establish an environment therefor. AMED consolidates budgets for R&D expenses, which had previously been allocated from different sources, such as the Ministry of Education, Culture, Sports, Science and Technology, the Ministry of Health, Labour and Welfare, and the Ministry of Economy, Trade and Industry. It provides funds strategically to universities, research institutions, etc. By promoting medical R&D, AMED aims to achieve the world's highest level of medical care/services to contribute to a society in which people live long and healthy lives. To achieve this mission, it is imperative that R&D funded by AMED is widely understood and supported. Maintaining and improving research integrity is a prerequisite to this end. AMED is taking various measures to ensure fair and appropriate R&D. It is asking researchers to participate in its responsible conduct in research (RCR) education program and to comply with its rules for managing conflicts of interest (COI). In addition, AMED also conducts a grant program to create and distribute a variety of educational materials on RCR and other matters. Further, AMED is establishing a platform that allows researchers to exchange information about research integrity, and it is undertaking additional measures, such as holding meetings and international symposia on research integrity.

Development of a NASA Integrated Technical Workforce Career Development Model Entitled Requisite Occupation Competencies and Knowledge -- the ROCK

Science.gov (United States)

Menrad, Robert J.; Larson, Wiley J.

2008-01-01

This paper shares the findings of NASA's Integrated Learning and Development Program (ILDP) in its effort to reinvigorate the HANDS-ON practice of space systems engineering and project/program management through focused coursework, training opportunities, on-the job learning and special assignments. Prior to March 2005, NASA responsibility for technical workforce development (the program/project manager, systems engineering, discipline engineering, discipline engineering and associated communities) was executed by two parallel organizations. In March 2005 these organizations merged. The resulting program-ILDP-was chartered to implement an integrated competency-based development model capable of enhancing NASA's technical workforce performance as they face the complex challenges of Earth science, space science, aeronautics and human spaceflight missions. Results developed in collaboration with NASA Field Centers are reported on. This work led to definition of the agency's first integrated technical workforce development model known as the Requisite Occupation Competence and Knowledge (the ROCK). Critical processes and products are presented including: 'validation' techniques to guide model development, the Design-A-CUrriculuM (DACUM) process, and creation of the agency's first systems engineering body-of-knowledge. Findings were validated via nine focus groups from industry and government, validated with over 17 space-related organizations, at an estimated cost exceeding $300,000 (US). Masters-level programs and training programs have evolved to address the needs of these practitioner communities based upon these results. The ROCK reintroduced rigor and depth to the practitioner's development in these critical disciplines enabling their ability to take mission concepts from imagination to reality.

Engineering development studies for integrated evacuated CPC arrays

Science.gov (United States)

Winston, R.

1982-04-01

An evacuated tube concentrator which achieves respectable high temperature performance (100 C to 300 C) was developed. The design concept utilizes nonimaging CPC type concentration integrated into each tube by shaping the outer glass vacuum envelope. The detailed design, prototype fabrication and preliminary test measurements are reviewed. In addition the results of this first study specifically devoted to engineering development questions related to practical applications of this collector concept are summarized. Questions having to do with the deployment of medium to large area arrays, optimizations of the manifolding of individual tube panels, selected near term applications (with an emphasis on residential cooling based on Rankine driven chillers) and long term performance projections are addressed.

Development of integrated metallic container

International Nuclear Information System (INIS)

Teper, B.

1985-01-01

Several alternative designs of the integrated metallic container are being investigated in an effort to obtain an optimal integrated system for transportation, storage and disposal of used fuel from CANDU Nuclear Generating Stations. Three specific designs having thin-wall, medium and thick-walls are being proposed in more detail. A novel, simplified closure system is introduced. Some economic consideration is also presented. Many ideas presented in the report deviate from the currently pursued methodology. They are presented here as an alternative for future considerations

An object-oriented framework for application development and integration in hydroinformatics

Energy Technology Data Exchange (ETDEWEB)

Alfredsen, Knut Tore

1999-03-01

Computer-based simulation systems are commonly used as tools for planning and management of water resources. The scope of such tools is growing out of the traditional hydrologic/hydraulic modelling, and the need to integrate financial, ecological and other conditions has increased the complexity of the modelling systems. The field of integrating the hydrology and hydraulics with the socio-technical aspects is commonly referred to as hydro informatics. This report describes an object-oriented approach to build a platform for development and integration of modelling systems to form hydro informatics applications. Object-oriented analysis, design and implementation methods have gained momentum over the past decade as the chosen tool in many application areas. The component-based development method offers advantages in the form of a more integrated and real world true modelling process. Thus there is the opportunity to develop robust and reusable components and simplified maintenance and extendibility through a better modularization of the software. In a networked future the object-oriented methods also offer advantages in building distributed systems. Object-orientation has many levels of application in a hydro informatics system, from handling parts like data storage or user interfaces to being the method used for the complete development. Some examples of using object-oriented methods in the development of hydro informatics systems are discussed in this report. The development platform is built as an application framework with a special focus on extensibility and reuse of components. The framework consists of five sub parts: structural components describing the real world entities, computational elements for implementation of process models and linkage to external modelling systems, data handling classes, simulation control units, and a set of utility classes. Extensibility is maintained either through the use of inheritance from abstract classes defining the

Early Child Development and Nutrition: A Review of the Benefits and Challenges of Implementing Integrated Interventions.

Science.gov (United States)

Hurley, Kristen M; Yousafzai, Aisha K; Lopez-Boo, Florencia

2016-03-01

Poor nutrition (substandard diet quantity and/or quality resulting in under- or overnutrition) and the lack of early learning opportunities contribute to the loss of developmental potential and life-long health and economic disparities among millions of children aged early child development (ECD) or nutrition have been linked to positive child development and/or nutritional status, and recommendations currently advocate for the development and testing of integrated interventions. We reviewed the theoretical and practical benefits and challenges of implementing integrated nutrition and ECD interventions along with the evidence for best practice and benefit-cost and concluded that the strong theoretical rationale for integration is more nuanced than the questions that the published empirical evidence have addressed. For example, further research is needed to 1) answer questions related to how integrated messaging influences caregiver characteristics such as well-being, knowledge, and behavior and how these influence early child nutrition and development outcomes; 2) understand population and nutritional contexts in which integrated interventions are beneficial; and 3) explore how varying implementation processes influence the efficacy, uptake, and cost-benefit of integrated nutrition and ECD interventions. © 2016 American Society for Nutrition.

Impact of Professional Development on Level of Technology Integration in the Elementary Classroom

Science.gov (United States)

Miktuk, Darlynda

2012-01-01

The purpose of the quantitative study was to evaluate the impact of professional development on the level of technology integration within the elementary classroom using an online survey known as the LoTi (levels of teaching innovation) survey. Information about the history of computers, technology integration, andragogy, and effective…

Development and Standardization of Inventory for Measuring Students' Integration into University Academic Culture

Science.gov (United States)

Esomonu, Nkechi Patricia-Mary; Okeaba, James Uzoma

2016-01-01

The study developed and standardized an Inventory for measuring Students' Integration into University Academic Culture named Inventory for Students' Integration into University Academic Culture (ISIUAC). The increase in dropout rates, substance use, cultism and other deviant behaviours in Nigerian universities makes it necessary for one to ask the…

Revised SWAT. The integrated burnup calculation code system

International Nuclear Information System (INIS)

Suyama, Kenya; Mochizuki, Hiroki; Kiyosumi, Takehide

2000-07-01

SWAT is an integrated burnup code system developed for analysis of post irradiation examination, transmutation of radioactive waste, and burnup credit problem. This report shows an outline and a user's manual of revised SWAT. This revised SWAT includes expansion of functions, increasing supported machines, and correction of several bugs reported from users of previous SWAT. (author)

Revised SWAT. The integrated burnup calculation code system

Energy Technology Data Exchange (ETDEWEB)

Suyama, Kenya; Mochizuki, Hiroki [Department of Fuel Cycle Safety Research, Nuclear Safety Research Center, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Kiyosumi, Takehide [The Japan Research Institute, Ltd., Tokyo (Japan)

2000-07-01

SWAT is an integrated burnup code system developed for analysis of post irradiation examination, transmutation of radioactive waste, and burnup credit problem. This report shows an outline and a user's manual of revised SWAT. This revised SWAT includes expansion of functions, increasing supported machines, and correction of several bugs reported from users of previous SWAT. (author)

Development of a landscape integrity model framework to support regional conservation planning.

Science.gov (United States)

Walston, Leroy J; Hartmann, Heidi M

2018-01-01

Land managers increasingly rely upon landscape assessments to understand the status of natural resources and identify conservation priorities. Many of these landscape planning efforts rely on geospatial models that characterize the ecological integrity of the landscape. These general models utilize measures of habitat disturbance and human activity to map indices of ecological integrity. We built upon these modeling frameworks by developing a Landscape Integrity Index (LII) model using geospatial datasets of the human footprint, as well as incorporation of other indicators of ecological integrity such as biodiversity and vegetation departure. Our LII model serves as a general indicator of ecological integrity in a regional context of human activity, biodiversity, and change in habitat composition. We also discuss the application of the LII framework in two related coarse-filter landscape conservation approaches to expand the size and connectedness of protected areas as regional mitigation for anticipated land-use changes.

EVALUATION OF PROSPECTS OF INTEGRATED DEVELOPMENT OF GEOTHERMAL RESOURCES OF THE NORTH CAUCASUS REGION

Directory of Open Access Journals (Sweden)

A. B. Alkhasov

2017-01-01

Full Text Available The aim is to assess the prospects for the integrated development of geothermal resources in the North Caucasus region.Methods. Technological solutions are proposed for integrated development of hightemperature hydrogeothermal resources of the North Caucasus region. The evaluation of the effectiveness of the proposed technologies was carried out with the use of physico-mathematical, thermodynamic and optimization methods of calculation and physico-chemical experimental studies.Findings. Were estimated the prospects of complex processing of highly parametrical geothermal resources of the Eastern Ciscaucasian artesian basin (ECAB with conversion of thermal energy into electric power in a binary GeoPP and subsequent extraction of dissolved chemical compounds. The most promising areas for the development of such resources were indicated. In connection with the exacerbated environmental problems, it was shown the need for the firstpriority integrated development of associated high-mineralized brines of the South Sukhokum group of gas-oil wells in North Dagestan. At present, associated brines with a radioactive background exceeding permissible standards are discharged to surface filtration fields; technological solutions for their decontamination and integrated development were proposed.Conclusions. The comprehensive development of high-temperature hydrogeothermal brines is a new direction in geothermal energy, which will significantly increase the production of hydrogeothermal resources and develop the geothermal industry at a higher level with the implementation of energy-efficient advanced technologies. Large-scale development of brines will solve significant problems of energy supply in the region and import substitution, fully meeting Russia's needs for food and technical salt and other rare elements. 

On the Tengiz petroleum deposit previous study

International Nuclear Information System (INIS)

Nysangaliev, A.N.; Kuspangaliev, T.K.

1997-01-01

Tengiz petroleum deposit previous study is described. Some consideration about structure of productive formation, specific characteristic properties of petroleum-bearing collectors are presented. Recommendation on their detail study and using of experience on exploration and development of petroleum deposit which have analogy on most important geological and industrial parameters are given. (author)

National standards in pathology education: developing competencies for integrated medical school curricula.

Science.gov (United States)

Sadofsky, Moshe; Knollmann-Ritschel, Barbara; Conran, Richard M; Prystowsky, Michael B

2014-03-01

Medical school education has evolved from department-specific memorization of facts to an integrated curriculum presenting knowledge in a contextual manner across traditional disciplines, integrating information, improving retention, and facilitating application to clinical practice. Integration occurs throughout medical school using live data-sharing technologies, thereby providing the student with a framework for lifelong active learning. Incorporation of educational teams during medical school prepares students for team-based patient care, which is also required for pay-for-performance models used in accountable care organizations. To develop learning objectives for teaching pathology to medical students. Given the rapid expansion of basic science knowledge of human development, normal function, and pathobiology, it is neither possible nor desirable for faculty to teach, and students to retain, this vast amount of information. Courses teaching the essentials in context and engaging students in the learning process enable them to become lifelong learners. An appreciation of pathobiology and the role of laboratory medicine underlies the modern practice of medicine. As such, all medical students need to acquire 3 basic competencies in pathology: an understanding of disease mechanisms, integration of mechanisms into organ system pathology, and application of pathobiology to diagnostic medicine. We propose the development of 3 specific competencies in pathology to be implemented nationwide, aimed at disease mechanisms/processes, organ system pathology, and application to diagnostic medicine. Each competency will include learning objectives and a means to assess acquisition, integration, and application of knowledge. The learning objectives are designed to be a living document managed (curated) by a group of pathologists representing Liaison Committee on Medical Education-accredited medical schools nationally. Development of a coherent set of learning objectives will

Financing of an integrated nuclear desalination system in developing countries

International Nuclear Information System (INIS)

Bouzguenda, N.; Albouy, M.; Nisan, S.

2007-01-01

This paper focuses on a case study of financing a project of an integrated nuclear desalination system at la Skhira site in Tunisia. More specifically, it shows the financial characteristics of this project, known as TUNDESAL, the main financing mechanisms that can be used, and the principal actions required to attract the potential investors and lenders. The paper describes the basic requirements for the deployment of nuclear energy in a developing or an emerging country, with no previous experience of nuclear power; the specific financial considerations corresponding to the particular characteristics of nuclear desalination projects: high capital costs, high level of risks and uncertainties related in particular to long construction lead times and social and environmental concerns; the main risks of these projects; the profitability study of the TUNDESAL project: application of the discounted cash flow analysis; the main financing sources for the project; the financing schemes that can be used for project implementation and comparison between these schemes in terms of benefits generated, after covering project costs and repayment of lenders and investors; the main actions to be done for making the project financially attractive in order to gain the confidence of investors and international financial institutions (optimal allocation of project risks and uncertainties, a suitable and flexible energy and water tariffs policy, etc.). The analysis has shown that in particular conditions of Tunisia, the most attractive financial scheme could be the 'project financing + leasing'. (authors)

Metrics for Analyzing Quantifiable Differentiation of Designs with Varying Integrity for Hardware Assurance

Science.gov (United States)

2017-03-01

Keywords — Trojan; integrity; trust; quantify; hardware; assurance; verification; metrics ; reference, quality ; profile I. INTRODUCTION A. The Rising...as a framework for benchmarking Trusted Part certifications. Previous work conducted in Trust Metric development has focused on measures at the...the lowest integrities. Based on the analysis, the DI metric shows measurable differentiation between all five Test Article Error Location Error

Developing integrated health and social care services for older persons in Europe.

Science.gov (United States)

Leichsenring, Kai

2004-01-01

This paper is to distribute first results of the EU Fifth Framework Project 'Providing integrated health and social care for older persons-issues, problems and solutions' (PROCARE-http://www.euro.centre.org/procare/). The project's first phase was to identify different approaches to integration as well as structural, organisational, economic and social-cultural factors and actors that constitute integrated and sustainable care systems. It also served to retrieve a number of experiences, model ways of working and demonstration projects in the participating countries which are currently being analysed in order to learn from success-or failure-and to develop policy recommendations for the local, national and European level. The paper draws on existing definitions of integrated care in various countries and by various scholars. Given the context of an international comparative study it tries to avoid providing a single, ready-made definition but underlines the role of social care as part and parcel of this type of integrated care in the participating countries. The paper is based on national reports from researchers representing ten organisations (university institutes, consultancy firms, research institutes, the public and the NGO sector) from 9 European countries: Austria, Denmark, Finland, France, Germany, Greece, Italy, the Netherlands, and the UK. Literature reviews made intensive use of grey literature and evaluation studies in the context of at least five model ways of working in each country. As a result of the cross-national overview an attempt to classify different approaches and definitions is made and indicators of relative importance of the different instruments used in integrating health and social care services are provided. The cross-national overview shows that issues concerning co-ordination and integration of services are high on the agenda in most countries. Depending on the state of service development, various approaches and instruments can be

First and second derivatives of two electron integrals over Cartesian Gaussians using Rys polynomials

International Nuclear Information System (INIS)

Schlegel, H.B.; Binkley, J.S.; Pople, J.A.

1984-01-01

Formulas are developed for the first and second derivatives of two electron integrals over Cartesian Gaussians. Integrals and integral derivatives are evaluated by the Rys polynomial method. Higher angular momentum functions are not used to calculate the integral derivatives; instead the integral formulas are differentiated directly to produce compact and efficient expressions for the integral derivatives. The use of this algorithm in the ab initio molecular orbital programs gaussIan 80 and gaussIan 82 is discussed. Representative timings for some small molecules with several basis sets are presented. This method is compared with previously published algorithms and its computational merits are discussed

Fabricating and Characterizing the Microfluidic Solid Phase Extraction Module Coupling with Integrated ESI Emitters

Directory of Open Access Journals (Sweden)

Hangbin Tang

2018-05-01

Full Text Available Microfluidic chips coupling with mass spectrometry (MS will be of great significance to the development of relevant instruments involving chemical and bio-chemical analysis, drug detection, food and environmental applications and so on. In our previous works, we proposed two types of microfluidic electrospray ionization (ESI chip coupling with MS: the two-phase flow focusing (FF ESI microfluidic chip and the corner-integrated ESI emitter, respectively. However the pretreatment module integrated with these ESI emitters is still a challenging problem. In this paper, we concentrated on integrating the solid phase micro-extraction (SPME module with our previous proposed on-chip ESI emitters; the fabrication processes of such SPME module are fully compatible with our previous proposed ESI emitters based on the multi-layer soft lithography. We optimized the structure of the integrated chip and characterized its performance using standard samples. Furthermore, we verified its abilities of salt removal, extraction of multiple analytes and separation through on-chip elution using mimic biological urine spiked with different drugs. The results indicated that our proposed integrated module with ESI emitters is practical and effective for real biological sample pretreatment and MS detection.

On the Integration and Synchronization of the Economic Development

Directory of Open Access Journals (Sweden)

Elena Viktorovna Kurushina

2015-12-01

Full Text Available Modern trends are associated with the integration and globalization. Integration is an immanent property of all systems and is the result of the evolution. Integration has its positive and negative effects. The degree of the progress towards the global economy is measured by the integration level in terms of the market integration indicators and the economic convergence. The latent characteristic of the globalization as a process of a unified system creation is the synchronization assuming the coincidence of the economic development ascending and descending trends in time. The coincidence of the tempo-rhythms is studied on the basis of coefficients of the pair correlation of relative growth rates of GDP for 1995-2010 in 175 countries. The very high degree of synchronization of economic dynamics is revealed in the European Union countries and in the United States. The low level of the tempo-rhythm synchronization is registered on the territory of the CIS countries. Russia occupies 29th position in the world ranking. The study of the dependence of the economic instability in the world during the crisis of 2008-2009 on the level of the tempo-rhythm coincidence shows that the more synchronized economic dynamics is, the greater excess coefficient of the average dynamics is observed during the crisis period. In 2009 it manifested itself in a greater reduction of the GDP growth rates in the European countries relatively the average wave dynamics in the pre-crisis period. The obtained results are of interest from the perspective of the substantiation of the regional economic group creation and in the context of the measures on increasing the economic stability.

Web-based integrated public healthcare information system of Korea: development and performance.

Science.gov (United States)

Ryu, Seewon; Park, Minsu; Lee, Jaegook; Kim, Sung-Soo; Han, Bum Soo; Mo, Kyoung Chun; Lee, Hyung Seok

2013-12-01

The Web-based integrated public healthcare information system (PHIS) of Korea was planned and developed from 2005 to 2010, and it is being used in 3,501 regional health organizations. This paper introduces and discusses development and performance of the system. We reviewed and examined documents about the development process and performance of the newly integrated PHIS. The resources we analyzed the national plan for public healthcare, information strategy for PHIS, usage and performance reports of the system. The integrated PHIS included 19 functional business areas, 47 detailed health programs, and 48 inter-organizational tasks. The new PHIS improved the efficiency and effectiveness of the business process and inter-organizational business, and enhanced user satisfaction. Economic benefits were obtained from five categories: labor, health education and monitoring, clinical information management, administration and civil service, and system maintenance. The system was certified by a patent from the Korean Intellectual Property Office and accredited as an ISO 9001. It was also reviewed and received preliminary comments about its originality, advancement, and business applicability from the Patent Cooperation Treaty. It has been found to enhance the quality of policy decision-making about regional healthcare at the self-governing local government level. PHIS, a Web-based integrated system, has contributed to the improvement of regional healthcare services of Korea. However, when it comes to an appropriate evolution, the needs and changing environments of community-level healthcare service and IT infrastructure should be analyzed properly in advance.

Optimal integration of organic Rankine cycles with industrial processes

International Nuclear Information System (INIS)

Hipólito-Valencia, Brígido J.; Rubio-Castro, Eusiel; Ponce-Ortega, José M.; Serna-González, Medardo; Nápoles-Rivera, Fabricio; El-Halwagi, Mahmoud M.

2013-01-01

Highlights: • An optimization approach for heat integration is proposed. • A new general superstructure for heat integration is proposed. • Heat process streams are simultaneously integrated with an organic Rankine cycle. • Better results can be obtained respect to other previously reported methodologies. - Abstract: This paper presents a procedure for simultaneously handling the problem of optimal integration of regenerative organic Rankine cycles (ORCs) with overall processes. ORCs may allow the recovery of an important fraction of the low-temperature process excess heat (i.e., waste heat from industrial processes) in the form of mechanical energy. An integrated stagewise superstructure is proposed for representing the interconnections and interactions between the HEN and ORC for fixed data of process streams. Based on the integrated superstructure, the optimization problem is formulated as a mixed integer nonlinear programming problem to simultaneously account for the capital and operating costs including the revenue from the sale of the shaft power produced by the integrated system. The application of this method is illustrated with three example problems. Results show that the proposed procedure provides significantly better results than an earlier developed method for discovering optimal integrated systems using a sequential approach, due to the fact that it accounts simultaneously for the tradeoffs between the capital and operating costs as well as the sale of the produced energy. Also, the proposed method is an improvement over the previously reported methods for solving the synthesis problem of heat exchanger networks without the option of integration with an ORC (i.e., stand-alone heat exchanger networks)

DEVELOPMENT OF FINE MOTOR COORDINATION AND VISUAL-MOTOR INTEGRATION IN PRESCHOOL CHILDREN

Directory of Open Access Journals (Sweden)

Haris MEMISEVIC

2013-03-01

Full Text Available Fine motor skills are prerequisite for many everyday activities and they are a good predictor of a child's later academic outcome. The goal of the present study was to assess the effects of age on the development of fine motor coordination and visual-motor integration in preschool children. The sample for this study consisted of 276 preschool children from Canton Sara­jevo, Bosnia and Herzegovina. We assessed children's motor skills with Beery Visual Motor Integration Test and Lafayette Pegboard Test. Data were analyzed with one-way ANOVA, followed by planned com­parisons between the age groups. We also performed a regression analysis to assess the influence of age and motor coordination on visual-motor integration. The results showed that age has a great effect on the development of fine motor skills. Furthermore, the results indicated that there are possible sensitive periods at preschool age in which the development of fine motor skills is accelerated. Early intervention specialists should make a thorough evaluations of fine motor skills in preschool children and make motor (rehabilitation programs for children at risk of fine motor delays.

Integrated computer-aided design in automotive development development processes, geometric fundamentals, methods of CAD, knowledge-based engineering data management

CERN Document Server

Mario, Hirz; Gfrerrer, Anton; Lang, Johann

2013-01-01

The automotive industry faces constant pressure to reduce development costs and time while still increasing vehicle quality. To meet this challenge, engineers and researchers in both science and industry are developing effective strategies and flexible tools by enhancing and further integrating powerful, computer-aided design technology. This book provides a valuable overview of the development tools and methods of today and tomorrow. It is targeted not only towards professional project and design engineers, but also to students and to anyone who is interested in state-of-the-art computer-aided development. The book begins with an overview of automotive development processes and the principles of virtual product development. Focusing on computer-aided design, a comprehensive outline of the fundamentals of geometry representation provides a deeper insight into the mathematical techniques used to describe and model geometrical elements. The book then explores the link between the demands of integrated design pr...

Modeling for Integrated Science Management and Resilient Systems Development

Science.gov (United States)

Shelhamer, M.; Mindock, J.; Lumpkins, S.

2014-01-01

Many physiological, environmental, and operational risks exist for crewmembers during spaceflight. An understanding of these risks from an integrated perspective is required to provide effective and efficient mitigations during future exploration missions that typically have stringent limitations on resources available, such as mass, power, and crew time. The Human Research Program (HRP) is in the early stages of developing collaborative modeling approaches for the purposes of managing its science portfolio in an integrated manner to support cross-disciplinary risk mitigation strategies and to enable resilient human and engineered systems in the spaceflight environment. In this talk, we will share ideas being explored from fields such as network science, complexity theory, and system-of-systems modeling. Initial work on tools to support these explorations will be discussed briefly, along with ideas for future efforts.

Development of an integrated cost model for nuclear plant decommissioning

International Nuclear Information System (INIS)

Amos, G.; Roy, R.

2003-01-01

A need for an integrated cost estimating tool for nuclear decommissioning and associated waste processing and storage facilities for Intermediate Level Waste (ILW) was defined during the authors recent MSc studies. In order to close the defined gap a prototype tool was developed using logically derived CER's and cost driver variables. The challenge in developing this was to be able to produce a model that could produce realistic cost estimates from the limited levels of historic cost data that was available for analysis. The model is an excel based tool supported by 3 point risk estimating output and is suitable for producing estimates for strategic or optional cost estimates (±30%) early in the conceptual stage of a decommissioning project. The model was validated using minimal numbers of case studies supported by expert opinion discussion. The model provides an enhanced approach for integrated decommissioning estimates which will be produced concurrently with strategic options analysis on a nuclear site

Development of integrated nuclear data utilization system for innovative reactors

International Nuclear Information System (INIS)

Naoki, Yamano; Masayuki, Igashira; Akira, Hasegawa; Kiyoshi, Kato

2005-01-01

An integrated nuclear data utilization system has been developing for innovative nuclear energy systems such as innovative reactors and accelerator-driven systems. The system has been constructed as a modular code system, which consists of a managing system and two subsystems. The management system named CONDUCT controls system resource management of the PC Linux server and the user authentication through Internet access. A subsystem is the nuclear data search and plotting subsystem based on a SPES engine developed by Hokkaido University. Nuclear data such as EXFOR, JENDL-3.3, ENDF/B-VI and JEFF-3.1 can be searched and plotted in the subsystem. The other is the nuclear data processing and utilization subsystem, which is able to handle JENDL-3.3, ENDF/B-VI and JEFF-3.1 to generate point-wise and group cross sections in several formats, and perform various criticality and shielding benchmarks for verification of nuclear data and validation of design methods for innovative reactors. This paper presents an overview of the integrated nuclear data utilization system, describes the progress of the system development to examine the operability of the user interface and discuss specifications of the two subsystems. (authors)

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Development of pixel readout integrated circuits for extreme rate and radiation

CERN Document Server

Garcia-Sciveres, M; CERN. Geneva. The LHC experiments Committee; LHCC

2013-01-01

Letter of Intent for RD Collaboration Proposal focused on development of a next generation pixel readout integrated circuits needed for high luminosity LHC detector upgrades. Brings together ATLAS and CMS pixel chip design communities.

The configuration development and integration of the TPX device

International Nuclear Information System (INIS)

Brown, T.G.

1993-01-01

The TPX configuration was designed to meet the physics objectives and subsystem requirements in an arrangement that allowed access for remote maintenance. The steady state operations of TPX favored the use of superconducting magnets for both the toroidal and poloidal field systems. The desire to react the TF centering and overturning forces in a simplified wedged system lead to a TF case concept incorporating ''two-coil'' TF modules in a 90 degrees four-coil quadrant arrangement. Low ripple and tangential plasma access to accommodate TFTR neutral beams were leading factors in determining the size and number of TF coils. The need for a large amount of space for the divertor and first wall component coolant services further influenced the shaping of the vacuum vessel. Additional configuration influences included: low activation considerations, diverter pumping, remote maintenance requirements, service access and compatibility with the existing TFTR text cell facility. The TPX configuration development and integration process has evolved through the conceptual design period and is now ready to enter the Preliminary Design Phase of the project. This paper describes the status of the configuration development and integration of the major TPX tokamak subsystems components

Organizational learning in developing the integrated quality management

Directory of Open Access Journals (Sweden)

Juhani Anttila

2018-04-01

Full Text Available High quality is organizations’ competitive advantage. It is beneficial to base this on professional approach, and basic concepts and definitions with scientific foundation. The necessary main concepts consist of quality, quality management, quality improvement and quality assurance. Organizations' top management is responsible of the quality management decisions and implementations. The present practical situation is fragmented and the implementations are most often based on the instrumental means of the different methodological schools, which is confusing and detrimental to the understanding and usefulness of the concept of quality management. It is not beneficial to build a special system for quality management by only following the requirements of the general standard. This cannot ensure competitive business advantage. In this article, we present an alternative approach that is a natural practical way to realize quality management as the teleological solution, Quality Integration, in which the general and specific quality concepts, principles and methodology are embedded within the normal business management activities. Our Quality Integration is based on the thinking of organizational learning. Its framework covers both running the current business and improving the overall business performance. This model has been used as the thinking framework in practical organizational cases since 1990’s. As the business circumstances change constantly, the organization must be constantly ready to renew through both small and radical changes. This change also receives resistance, and the development takes place according to a multi-phase process towards the new integration and requires a proper recognition and decisions. Principles of the organizational learning can help organizations in a consistent way. Evaluation of the overall organizational performance is an important quality management practice and should take into account performance enablers

Development of integrated control system for smart factory in the injection molding process

Science.gov (United States)

Chung, M. J.; Kim, C. Y.

2018-03-01

In this study, we proposed integrated control system for automation of injection molding process required for construction of smart factory. The injection molding process consists of heating, tool close, injection, cooling, tool open, and take-out. Take-out robot controller, image processing module, and process data acquisition interface module are developed and assembled to integrated control system. By adoption of integrated control system, the injection molding process can be simplified and the cost for construction of smart factory can be inexpensive.

EM-54 Technology Development In Situ Remediation Integrated Program

International Nuclear Information System (INIS)

1993-08-01

The Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of Environmental Restoration and Waste Management (EM) in November 1989. EM manages remediation of all DOE sites as well as wastes from current operations. The goal of the EM program is to minimize risks to human health, safety and the environment, and to bring all DOE sites into compliance with Federal, state, and local regulations by 2019. EM-50 is charged with developing new technologies that are safer, more effective and less expensive than current methods. The In Situ Remediation Integrated Program (the subject of this report) is part of EM-541, the Environmental Restoration Research and Development Division of EM-54. The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: Significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces; in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP tends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years

Development of a Mathematics, Science, and Technology Education Integrated Program for a Maglev

Science.gov (United States)

Park, Hyoung Seo

2006-01-01

The purpose of the study was to develop an MST Integrated Program for making a Maglev hands-on activity for higher elementary school students in Korea. In this MST Integrated Program, students will apply Mathematics, Science, and Technology principles and concepts to the design, construction, and evaluation of a magnetically levitated vehicle. The…

The integrated project SOFC600 development of low-temperature SOFC

DEFF Research Database (Denmark)

Rietveld, B.; Van Berkel, F.; Zhang-Steenwinkel, Y.

2009-01-01

The Integrated Project SOFC600 unites 21 partners jointly working on the research and development of SOFC stack components for operation at 600oC. The project is funded by the European Commission within the 6th Framework Programme. Low-temperature operation is considered essential for achieving c...

Teacher Perceptions towards ICT Integration: Professional Development through Blended Learning

Science.gov (United States)

Qasem, Arwa Ahmed Abdo; Viswanathappa, G.

2016-01-01

Integrating Information and Communication Technology (ICT) into teaching and learning is a growing area that has attracted many educators' attention in recent years. Teachers need to be involved in collaborative projects and development of intervention change strategies, which include teaching partnerships with ICT as a tool. Teacher perceptions…

Combining Critical Reflection and Design Thinking to Develop Integrative Learners

Science.gov (United States)

Welsh, M. Ann; Dehler, Gordon E.

2013-01-01

In this article, we argue for advancing grounded curricula, which explicitly link theory and pedagogy, and executing them in authentic and multidisciplinary settings as a means to facilitate student growth into integrative learners. We describe the development of a student-centered learning experience that combines elements of critical management…

An Integrated Approach for the Numerical Modelling of the Spray Forming Process

DEFF Research Database (Denmark)

Hattel, Jesper; Thorborg, Jesper; Pryds, Nini

2003-01-01

In this paper, an integrated approach for modelling the entire spray forming process is presented. The basis for the analysis is a recently developed model which extents previous studies and includes the interaction between an array of droplets and the enveloping gas. The formulation of the depos......In this paper, an integrated approach for modelling the entire spray forming process is presented. The basis for the analysis is a recently developed model which extents previous studies and includes the interaction between an array of droplets and the enveloping gas. The formulation...... is in fact the summation of "local" droplet size distributions along the r-axis. Furthermore, the deposition model proposed in the paper involves both the sticking efficiency of the droplets to the substrate as well as a geometrical model involving the effects of shadowing for the production of billet...

Professional Development for International Teachers: Examining TPACK and Technology Integration Decision Making

Science.gov (United States)

Dalal, Medha; Archambault, Leanna; Shelton, Catharyn

2017-01-01

This mixed-methods study explored the impacts of a semester-long technology professional development for secondary school international teachers from developing nations around the world. We used (a) a survey approach to examine international teachers' perceived technology integration abilities using the technological pedagogical content knowledge…

Integrating nutrition and child development interventions: scientific basis, evidence of impact, and implementation considerations.

Science.gov (United States)

Black, Maureen M; Pérez-Escamilla, Rafael; Rao, Sylvia Fernandez

2015-11-01

The Millennium Development Goals (MDGs) have contributed to unprecedented reductions in poverty and improvement in the lives of millions of men, women, and children in low- and middle-income countries. Yet, hundreds of millions of children under 5 y of age are not reaching their developmental potential. This article reviews the scientific basis for early childhood nutrition and child development interventions, the impact of integrated interventions on children's linear growth and cognitive development, and implementation strategies for integrated nutrition and child development programs. Advances in brain science have documented that the origins of adult health and well-being are grounded in early childhood, from conception through age 24 mo (first 1000 d) and extending to age 5 y (second 1000 d). Young children with adequate nutrition, nurturant caregiving, and opportunities for early learning have the best chances of thriving. Evidence from adoption, experimental, and quasi-experimental studies has shown that stunting prevention is sensitive during the first 1000 d, and sensitivity to child development interventions extends through the second 1000 d. Cognitive development responds to interventions post–1000 d with effect sizes that are inversely associated with initial age and length of program exposure. Integrated interventions need governance structures that support integrated policies and programming, with attention to training, supervision, and monitoring. The MDGs have been replaced by the Sustainable Development Goals (SDGs), with targets for the next 15 y. Achievement of the SDGs depends on children receiving adequate nutrition, nurturant caregiving, and learning opportunities from conception through age 5.

Development of an Information Database for the Integrated Airline Management System (IAMS

Directory of Open Access Journals (Sweden)

Bogdane Ruta

2017-08-01

Full Text Available In present conditions the activity of any enterprise is represented as a combination of operational processes. Each of them corresponds to relevant airline management systems. Combining two or more management systems, it is possible to obtain an integrated management system. For the effective functioning of the integrated management system, an appropriate information system should be developed. This article proposes a model of such an information system.

A Large-Scale Design Integration Approach Developed in Conjunction with the Ares Launch Vehicle Program

Science.gov (United States)

Redmon, John W.; Shirley, Michael C.; Kinard, Paul S.

2012-01-01

This paper presents a method for performing large-scale design integration, taking a classical 2D drawing envelope and interface approach and applying it to modern three dimensional computer aided design (3D CAD) systems. Today, the paradigm often used when performing design integration with 3D models involves a digital mockup of an overall vehicle, in the form of a massive, fully detailed, CAD assembly; therefore, adding unnecessary burden and overhead to design and product data management processes. While fully detailed data may yield a broad depth of design detail, pertinent integration features are often obscured under the excessive amounts of information, making them difficult to discern. In contrast, the envelope and interface method results in a reduction in both the amount and complexity of information necessary for design integration while yielding significant savings in time and effort when applied to today's complex design integration projects. This approach, combining classical and modern methods, proved advantageous during the complex design integration activities of the Ares I vehicle. Downstream processes, benefiting from this approach by reducing development and design cycle time, include: Creation of analysis models for the Aerodynamic discipline; Vehicle to ground interface development; Documentation development for the vehicle assembly.

Development and improvement of the integrated system of management

Directory of Open Access Journals (Sweden)

Lukmanova Inessa Galeevna

2014-07-01

Full Text Available Integrated management system construction can be considered a way that transforms using business processes and information resources into final construction products. Autonomous system of quality management, environmental, health and safety organizations introduction usually lead to the accumulation of duplicate documents, which increase the time spent on processing and analysis as well as increase the financial costs of maintaining the operation of each of them separately. System integration allows reducing these costs and entailing the most obvious benefits: reduced volumes of documents; reduction of time spent on analysis; reducing the cost of audit and certification; involvement of all the employees of the organization; productivity growth; increasing the attractiveness for consumers; reducing the burden on administrative and executive devices; ensuring a high level of flexibility in the organization's management system in case of internal and external changes. Integration of quality management systems, environmental management and safety management systems, production and safety led to the possibility to establish such integrated management system in developing building companies, which allows establishing a unified management system, as an element of management of organization. The main drawback of the currently used standards and specifications is the lack of flexibility of their application, as well as the basic principles and approaches to their implementation. Thus, knowing about what the system should be, but not knowing how to create it, many organizations have to operate without methodological support. Absence of mandatory standards concerning integration of management systems creates opportunities for the existence of multiple options for interaction systems. Economic effects on the integrated management system is formed from three sources: the reduction of production costs by improving product quality and reducing defects and

Mixed Waste Integrated Program -- Problem-oriented technology development