WorldWideScience

Sample records for prevent electron multipactor

  1. Effect of Electron Seeding on Experimentally Measured Multipactor Discharge Threshold

    Science.gov (United States)

    Noland, Jonathan; Graves, Timothy; Lemon, Colby; Looper, Mark; Farkas, Alex

    2012-10-01

    Multipactor is a vacuum phenomenon in which electrons, moving in resonance with an externally applied electric field, impact material surfaces. If the number of secondary electrons created per primary electron impact averages more than unity, the resonant interaction can lead to an electron avalanche. Multipactor is a generally undesirable phenomenon, as it can cause local heating, absorb power, or cause detuning of RF circuits. In order to increase the probability of multipactor initiation, test facilities often employ various seeding sources such as radioactive sources (Cesium 137, Strontium 90), electron guns, or photon sources. Even with these sources, the voltage for multipactor initiation is not certain as parameters such as material type, RF pulse length, and device wall thickness can all affect seed electron flux and energy in critical gap regions, and hence the measured voltage threshold. This study investigates the effects of seed electron source type (e.g., photons versus beta particles), material type, gap size, and RF pulse length variation on multipactor threshold. In addition to the experimental work, GEANT4 simulations will be used to estimate the production rate of low energy electrons (< 5 keV) by high energy electrons and photons. A comparison of the experimental fluxes to the typical energetic photon and particle fluxes experienced by spacecraft in various orbits will also be made. Initial results indicate that for a simple, parallel plate device made of aluminum, there is no threshold variation (with seed electrons versus with no seed electrons) under continuous-wave RF exposure.

  2. Analysis of microwave amplifier and frequency multiplier tube with a multipactor electron gun

    International Nuclear Information System (INIS)

    Yokoo, Kuniyoshi; Ono, Shoichi; Tai, Dong-Zhe.

    1983-01-01

    The performance analysis was made for a multipactor microwave tube with the aim of realizing a microwave amplifier or a frequency multiplier tube with a multipactor cathode with high efficiency and high power. The possibility for producing the multipactor tube with high efficiency and high power was shown by using effectively the characteristics of the multipactor cathode which emits pulsed electron current with narrow band, synchronizing with high frequency period. As the operating conditions for the multipactor cathode, it was shown that the wide spacing of the cathode was needed for the operation in high operating power, and the narrow spacing was needed for the operation in high efficiency and for reducing power consumption. It was also shown that there were the best values of the high-frequency voltage for the cathode operation. The study by the simulation for the multipactor cathode and for the acceleration zone of electron current was also performed to examine the possible performance for a microwave amplifier and a frequency multiplier tube. For the use of the multipactor cathode with a spacing of 1 mm, the conversion efficiency for d. c. input power was 86, 56 and 31 % for the primary, the secondary and the tertiary harmonic wave amplifications, respectively. (Asami, T.)

  3. Energy dissipation in plasma treated Nb and Secondary Electron Emission for modeling of multipactor discharges

    Science.gov (United States)

    Samolov, Ana; Popovic, Svetozar; Vuskovic, Leposava; Basovic, Milos; Cuckov, Filip; Raitses, Yevgeny; Kaganovich, Igor

    2013-09-01

    Electron-induced Secondary Electron Emission (SEE) is important in many gas discharge applications such as Hall thrusters, surface and multipactor discharges. Often they present the inhibiting phenomena in designing and operating of these systems, examples being the Superconducting Radio Frequency (SRF) accelerator cavities. The multipactor discharges depend on the resonant field configuration and on the SEE from the cavity surface. SEE is proportional to the energy dissipated by the primary electrons near the surface. Our analysis of energy spectra of secondary electrons indicates that the fraction of dissipated energy of primary electrons in solid reaches the maximum at the primary energies that produce the maximum yield. The better understanding of this mechanism is crucial for successful modeling of the multipactor discharge and design of vacuum electronic devices. We have developed an experimental set up to measure energy distribution of SEE from Nb coupons under different incident angles, since Nb is used for manufacturing of SRF accelerating cavities. Samples are placed in carousel target manifolds which are manipulated by robotic arm providing multiple degrees of freedom of a whole target system. Work supported by JSA/DOE contract No. DE-AC05-06OR23177.

  4. Beam-Induced Multipactoring and Electron-Cloud Effects in Particle Accelerators

    CERN Document Server

    Caspers, Friedhelm; Scandale, Walter; Zimmermann, F

    2009-01-01

    In the beam pipe of high-energy proton or positron accelerators an “electron cloud” can be generated by a variety of processes, e.g. by residual-gas ionization, by photoemission from synchrotron radiation, and, most importantly, by secondary emission via a beam-induced multipactoring process. The electron cloud commonly leads to a degradation of the beam vacuum by several orders of magnitude, to fast beam instabilities, to beam-size increases, and to fast or slow beam losses. At the Large Hadron Collider (LHC), the cloud electrons could also give rise to an additional heat load inside cold superconducting magnets. In addition to the direct heat deposition from incoherently moving electrons, a potential “magnetron effect” has been conjectured, where electrons would radiate coherently when moving in a strong magnetic field under the simultaneous influence of a beam-induced electric “wake” field that may become resonant with the cyclotron frequency. Electron-cloud effects are already being observed w...

  5. Multipactor experiment on a dielectric surface

    Science.gov (United States)

    Anderson, Rex Beach, III

    2001-12-01

    Multipactor is an electron multiplication process, or electron avalanche, that occurs on metallic and dielectric surfaces in the presence of rf microwave fields. Just as a rock avalanche only needs one rock to cause a larger slide of destruction, one electron under multipactor conditions can cause a tremendous amount of damage to electrical components. Multipactor is a nuisance that can cause excessive noise in communication satellites and radar, and damage to vacuum windows in particle accelerators. Single-surface multipactor on dielectrics is responsible for poor transmission properties of vacuum windows and can eventually lead to vacuum window failure. The repercussions of multipactor affect a wide range of people. For example, a civilian placing a call on a cell phone, or a captain dependent on radar for his ship's safety could both be affected by multipactor. In order to combat this expensive annoyance, a unique experiment to investigate single-surface multipactor on a dielectric surface was developed and tested. The motivation of this thesis is to introduce a novel experiment for multipactor that is designed to verify theoretical calculations and explore the physics behind the phenomenon. The compact apparatus consists of a small brass microwave cavity in a high vacuum system. Most single-surface multipactor experiments consist of a large resonant ring wave guide with a MW power supply. This experiment is the first to utilize a high Q resonant cavity and kW-level power supply to create multipactor on a dielectric surface. The small brass resonant cavity has an inner length of 9.154 cm with an inner diameter of 9.045 cm. A pulsed, variable frequency microwave source at ˜2.4 GHz, 2 kW peak excites the TE111 mode with a strong electric field parallel to a dielectric plate (˜0.2 cm thickness) that is inserted at the mid-plane of the cavity. The microwave pulses from the power supply are monitored by calibrated microwave diodes. These calibrated diodes along

  6. Multipactor Mitigation in Coaxial Lines by Means of Permanent Magnets

    CERN Document Server

    Gonzalez-Iglesias, D; Anza, S; Vague, J; Gimeno, B; Boria, V E; Raboso, D; Vicente, C; Gil, J; Caspers, F; Conde, L

    2014-01-01

    The main aim of this paper is the analysis of the feasibility of employing permanent magnets for the multipactor mitigation in a coaxial waveguide. First, the study of a coaxial line immersed in a uniform axial magnetic field shows that multipactor can be suppressed at any RF frequency if the external magnetic field is strong enough. Both theoretical simulations and experimental tests validate this statement. Next, multipactor breakdown of a coaxial line immersed in a hollow cylindrical permanent magnet is analyzed. Numerical simulations show that multipactor can be suppressed in a certain RF frequency range. The performed experimental test campaign demonstrates the capability of the magnet to avoid the multipactor electron multiplication process.

  7. Multipactor Discharge on Metal and Dielectric Surfaces

    Science.gov (United States)

    Kishek, R. A.

    1997-11-01

    Multipactor is a recurrent rf breakdown phenomenon based on secondary electron emission. It occurs in a wide range of devices when the electron trajectories due to the applied rf are resonant with structures such as accelerators, coherent radiation sources, satellites, and ECRH/ICRH antennas. A simple model is used to study the temporal evolution of a first-order, two-surface multipactor discharge and its interaction with the surrounding rf structure. The loading of the structure by the changing multipactor current, a combination of de-tuning and of reducing the quality factor of the resonant structure, is found to cause saturation. A novel phase focusing mechanism is discovered in which the electrostatic repulsion among the space charge may result in the multipactor electrons being very tightly bunched. The theory predicts the parameter range over which a steady-state, 2-surface multipactor may occur, linking material properties to the dynamics of the discharge(R. A. Kishek, Y. Y. Lau, and D. Chernin, Phys. Plasmas 4, 863 (1997).). The analytic theory is in excellent agreement with the computational results of the model and is applied to documented experimental observations of multipactor. On a dielectric (such as an rf window), multipactor poses a different kind of problem. Charge accumulation on the dielectric sets up a DC electric field which affects the dynamics of the discharge. Monte Carlo simulations are used to construct susceptibility diagrams for a wide range of materials that will allow an immediate assessment of the range of rf power over which multipactor may be expected to occur.

  8. Analysis of Multipactor Discharge

    International Nuclear Information System (INIS)

    Lau, Y. Y.

    2005-01-01

    Several comprehensive studies of radio frequency (rf) breakdown and rf heating are reported. They are of general interest to magnetic confinement fusion, rf linac, and high power microwave source development. The major results include: (1) a ground-breaking theory of multipactor discharge on dielectric, including a successful proof-of-principle experiment that verified the newly developed scaling laws, (2) an in depth investigation of the failure mechanisms of diamond windows and ceramic windows, and of the roles of graphitization, thin films of coating and contaminants, and (3) a most comprehensive theory, to date, on the heating of particulates by an electromagnetic pulse, and on the roles of rf magnetic field heating and of rf electric field heating, including the construction of new scaling laws that govern them. The above form a valuable knowledge base for the general problem of heating phenomenology

  9. Multipactor threshold calculation of coaxial transmission lines in microwave applications with nonstationary statistical theory

    International Nuclear Information System (INIS)

    Lin, S.; Li, Y.; Liu, C.; Wang, H.; Zhang, N.; Cui, W.; Neuber, A.

    2015-01-01

    This paper presents a statistical theory for the initial onset of multipactor breakdown in coaxial transmission lines, taking both the nonuniform electric field and random electron emission velocity into account. A general numerical method is first developed to construct the joint probability density function based on the approximate equation of the electron trajectory. The nonstationary dynamics of the multipactor process on both surfaces of coaxial lines are modelled based on the probability of various impacts and their corresponding secondary emission. The resonant assumption of the classical theory on the independent double-sided and single-sided impacts is replaced by the consideration of their interaction. As a result, the time evolutions of the electron population for exponential growth and absorption on both inner and outer conductor, in response to the applied voltage above and below the multipactor breakdown level, are obtained to investigate the exact mechanism of multipactor discharge in coaxial lines. Furthermore, the multipactor threshold predictions of the presented model are compared with experimental results using measured secondary emission yield of the tested samples which shows reasonable agreement. Finally, the detailed impact scenario reveals that single-surface multipactor is more likely to occur with a higher outer to inner conductor radius ratio

  10. Investigation of multipactor breakdown in communication satellite

    Indian Academy of Sciences (India)

    Multipactor breakdown or multipactor discharge is a form of high frequency discharge that may occur in microwave components operating at very low pressures. Some RF components of multi-channel communication satellites have co-axial geometry and handle high RF power under near-vacuum conditions.

  11. Investigation of multipactor breakdown in communication satellite ...

    Indian Academy of Sciences (India)

    Abstract. Multipactor breakdown or multipactor discharge is a form of high frequency discharge that may occur in microwave components operating at very low pressures. Some. RF components of multi-channel communication satellites have co-axial geometry and handle high RF power under near-vacuum conditions.

  12. Investigation of multipactor breakdown in communication satellite ...

    Indian Academy of Sciences (India)

    Multipactor breakdown or multipactor discharge is a form of high frequency discharge that may occur in microwave components operating at very low pressures. Some RF components of multi-channel communication satellites have co-axial geometry and handle high RF power under near-vacuum conditions.

  13. Secondary emission yield at low-primary energies of magnetic materials for anti-multipactor applications

    CERN Document Server

    Aguilera, L; Olano, L; Casas, A; Morales, P; Vázquez, M; Galán, L; Caspers, F; Costa-Pinto, P; Taborelli, M; Raboso, D

    2014-01-01

    Secondary electron emission processes under electron bombardment are central to many effects at surfaces and interfaces, and to many in vacuum high power RF electronic devices where multipactor can be very intense [1,2]. Ferrite materials are usually used in microwave components used in space telecommunication systems, as circulators, phase-shifters, switches, and isolators. The physics of the multipactor phenomenon existing in microwave devices based on ferrite materials is an important issue and it is urgent to be researched [3]. One difficulty in the analysis of the multipactor effect in RF components containing ferrite lies on the fact that this material is an anysotropic magnetic medium controlled by an applied permanent magnetic field, which is used to magnetize the ferrite material. SEY and other properties (structure, magnetic behaviour,...) of soft-magnetic materials were studied in this work. MnZn soft ferrites magnets are suitable in the situation of frequency < 3MHz, low loss and high μi. Comp...

  14. Multipactor Physics, Acceleration, and Breakdown in Dielectric-Loaded Accelerating Structures

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Richard P. [Naval Research Lab., Washington, DC (United States); Gold, Steven H. [Naval Research Lab., Washington, DC (United States)

    2016-07-01

    The objective of this 3-year program is to study the physics issues associated with rf acceleration in dielectric-loaded accelerating (DLA) structures, with a focus on the key issue of multipactor loading, which has been found to cause very significant rf power loss in DLA structures whenever the rf pulsewidth exceeds the multipactor risetime (~10 ns). The experiments are carried out in the X-band magnicon laboratory at the Naval Research Laboratory (NRL) in collaboration with Argonne National Laboratory (ANL) and Euclid Techlabs LLC, who develop the test structures with support from the DoE SBIR program. There are two main elements in the research program: (1) high-power tests of DLA structures using the magnicon output (20 MW @11.4 GHz), and (2) tests of electron acceleration in DLA structures using relativistic electrons from a compact X-band accelerator. The work during this period has focused on a study of the use of an axial magnetic field to suppress multipactor in DLA structures, with several new high power tests carried out at NRL, and on preparation of the accelerator for the electron acceleration experiments.

  15. Long-term multipactor discharge in multicarrier systems

    International Nuclear Information System (INIS)

    Anza, S.; Vicente, C.; Gimeno, B.; Boria, V. E.; Armendariz, J.

    2007-01-01

    A new mechanism of long-term multipactor in multicarrier systems is studied employing both analytical and numerical methods. In particular, the investigation is focused on the impact that a realistic secondary emission yield at low energies produces on the development of long term multipactor. A novel analytical model for this interperiod charge accumulation is presented using the traditional multipactor theory for parallel plates, and approximating the multicarrier signal as a single-carrier signal modulated by a pulsed signal envelope. The analytical predictions are verified by numerical simulations for a typical rectangular waveguide. The analytical and numerical results demonstrate that the susceptibility of the system to develop a long-term multipactor discharge increases with higher values of low-energy secondary emission yield

  16. Comparative study of experimental signals for multipactor and breakdown.

    CERN Document Server

    Dehler, Micha; Wuensch, Walter; Faus-Golfe, Angeles; Gimeno Martinez, Benito; Kovermann, Jan; Boria, Vicente; Raboso, David

    2012-01-01

    Performance limiting high-power rf phenomenon occur in both transmitter systems in satellites and high-gradient accelerating structures in particle accelerators. In satellites the predominant effect is multipactor while in accelerators it is breakdown. Both communities have studied their respective phenomena extensively and developed particular simulation tools and experimental techniques. A series of experiments to directly compare measurements made under multipactor and breakdown conditions has been initiated with the objective to crosscheck and compare the physics, simulation tools and measurement techniques.

  17. Multipactor in crossed rf fields on the cavity equator

    Directory of Open Access Journals (Sweden)

    Valery Shemelin

    2013-01-01

    Full Text Available Multipactor discharge in an accelerating superconducting elliptic cavity occurs usually near its equator. As simulations show, the dimensions of the trajectories of multipacting electrons are very small compared to the dimensions of a cavity. This feature gives a way for solving explicit equations of motion instead of cumbersome simulations. Electric and magnetic fields near the cavity equator are presented in a form of expansions up to the third power of coordinates. Comparisons with numerical calculations of fields made with the SLANS code for the TESLA cavity cells, as well as with the analytical solution for a spherical cavity, are done. These fields are used for solving the equations of motion of electrons in crossed rf fields near the equator. Based on the analysis of these equations, general features of multipacting in this area are obtained. Results are compared with simulations and experimental data. The experimental formulas for multipacting zones are explained and their dependence on the cavity geometries is shown. Because of small sizes of electron trajectories, the influence of the weld seams is taken into account. This suggests a possible explanation of multipacting in a cavity which was not found by simulations. The developed approach allows evaluation of multipacting in a cavity without its simulations but after an analysis of fields in the equatorial region. These fields can be computed by any code used for cavity calculation.

  18. Study of an instability of the PEP-II positron beam (Ohmi effect and Multipactoring)

    Energy Technology Data Exchange (ETDEWEB)

    Heifets, S.A. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)

    1996-08-01

    The processes defining the density distribution of the photoelectrons are quite complicated. In this study, a simplified model of the instability was used to get a quick estimate of the growth rate of the instability and the relative importance of the parameters, as has been done in Ohmi`s paper. The production rate and dynamics of the photoelectrons are studied for the PEP-II parameters. The growth rate of the transverse instability driven by the primary photoelectrons is of the order of 0.7 msec for the PEP-II parameters. The multipactoring at resonance currents cannot produce large electron density due to the final energy spread caused by the finite bunch length and the intrinsic energy spread of the secondary electrons. Production of the secondary electrons may lead to large average densities. The ion can be produced in electron collisions with the residual gas with density of the order of the electron density. (G.K.)

  19. Study of an instability of the PEP-II positron beam (Ohmi effect and multipactoring)

    International Nuclear Information System (INIS)

    Heifets, S.A.

    1995-11-01

    The paper is organized in the following way. First, Ohmi effect induced by direct flow of primary photoelectrons is studied for the PEP-II parameters. The production rate and kinematics take into account the antechamber of the LER. We discuss the effect of the secondary emission of electrons in the AL chamber, where the yield is larger than one. Resonance multipactoring is considered, and then the average density of the secondary electrons is estimated taking into account the space-charge effect and the interaction with the beam. We show that in the extreme case there is a self-consistent regime similar to the regime of the space-charge dominated cathode. Finally, the rate of ion production by accumulated electrons and the possibility of the ion induced pressure instability is discussed

  20. Multipactor susceptibility on a dielectric with two carrier frequencies

    Science.gov (United States)

    Iqbal, Asif; Verboncoeur, John; Zhang, Peng

    2018-04-01

    This work investigates multipactor discharge on a single dielectric surface with two carrier frequencies of an rf electric field. We use Monte Carlo simulations and analytical calculations to obtain susceptibility diagrams in terms of the rf electric field and normal electric field due to the residual charge on the dielectric. It is found that in contrast to the single frequency case, in general, the presence of a second carrier frequency of the rf electric field increases the threshold of the magnitude of the rf electric field to initiate multipactor. The effects of the relative strength and phase, and the frequency separation of the two carrier frequencies are examined. The conditions to minimize mulitpactor are derived.

  1. A Novel Technique for Mitigating Multipactor by Means of Magnetic Surface Roughness

    CERN Document Server

    Caspers, Friedhelm; Boria, V E; Bruns, W; Galan, L; Gimeno, B; Montero, I; Raboso, D; Vicente, C

    2010-01-01

    Multipactor phenomena which are closely linked to the SEY (secondary electron yield)can be mitigated by many different methods including groves in the metal surface as well as using electric or magnetic bias fields. However frequently the application of global magnetic or electric bias field is not practicable considering the weight and power limitations on-board satellites. Additionally, surface grooves may degrade the RF performance. Here we present a novel technique which is based on a magnetostatic field pattern on the metallic surface with fast spatial modulation in the order of 30 micron. This field pattern is produced by proper magnetization of an underlying ferromagnetic layer such as nickel. Simulations and preliminary experimental results will be shown and a number of applications, both for particle accelerators and satellite microwave payloads are discussed.

  2. SPS Dipole Multipactor Test and TEWave Diagnostics

    CERN Document Server

    Caspers, F; Edwards, P; Federmann, S; Holz, M; Taborelli, M

    2013-01-01

    Electron cloud accumulation in particle accelerators can be mitigated by coating the vacuum beam pipe with thin films of low secondary electron yield (SEY) material. The SEY of small coated samples are usually measured in the laboratory. To further test the properties of different coating materials, RF-induced multipacting in a coaxial waveguide configuration can be performed. The technique is applied to two main bending dipoles of the SPS, where the RF power is fed through a tungsten wire stretched along the vacuum chamber (6.4 m). A dipole with a bare stainless steel chamber shows a clear power threshold initiating an abrupt rise in reflected power and pressure. The effect is enhanced at RF frequencies corresponding to electron cyclotron resonances for given magnetic fields. Preliminary results show that the dipole with a carbon coated vacuum chamber does not exhibit any pressure rise or reflected RF power up to the maximum available input power. In the case of a large scale coating production this techniqu...

  3. Multipactor for e-cloud diagnostics

    CERN Document Server

    Costa Pinto, P; Edwards, P; Holz, M; Taborelli, M

    2012-01-01

    Electron cloud in particle accelerators can be mitigated by coating the vacuum beam pipe with thin films of low secondary electron yield (SEY). SEY of small samples can be measured in the laboratory. Verifying the performance of long pipes is more complex, since it requires their insertion in the accelerator and the subsequent measurement of the beam induced pressure rise. RF induced multipacting in a coaxial waveguide configuration is proposed as a test before insertion in the machine. The technique is applied to two main bending dipoles of the SPS, where the RF power is fed through a tungsten wire stretched along the vacuum chamber (6.4 m). A dipole with a bare stainless steel chamber shows a clear power threshold initiating an abrupt rise in reflected power and pressure. The effect is enhanced at RF frequencies corresponding to cyclotron resonances for given magnetic fields. Preliminary results show that the dipole with a carbon coated vacuum chamber does not exhibit any pressure rise or reflected RF power...

  4. Standard/Handbook for Multipactor Breakdown Prevention in Spacecraft Components

    Science.gov (United States)

    2014-05-28

    The Boeing Company Preston Partridge, The Aerospace Corporation Mike Settember, Jet Propulsion Laboratory Jian Xu, Aeroflex Incorporated A...richard.fink@nro.mil NRO Bruce Flanick bruce.flanick@ngc.com Northrop Grumman Mike Floyd Mike.Floyd@gdc4s.com General Dynamics David Ford david.ford

  5. Analysis of the electromagnetic radiation generated by a multipactor discharge occurring within a microwave passive component

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, M; Quesada, F; Alvarez, A [Department of Information and Communication Technologies, Technical University of Cartagena, Cartagena (Murcia) (Spain); Gimeno, B [Departamento de Fisica Aplicada y Electromagnetismo-ICMUV, Universidad de Valencia, Valencia (Spain); Miquel-Espanya, C; Raboso, D [European Space Agency (ESA), European Space Research and Technology Center (ESTEC), Noordwijk (Netherlands); Anza, S; Vicente, C; Gil, J [Aurora Software and Testing S.L., Valencia, Valencia (Spain); Taroncher, M; Reglero, M; Boria, V E, E-mail: benito.gimeno@uv.e [Departamento de Comunicaciones-ITEAM, Universidad Politecnica de Valencia (Spain)

    2010-10-06

    Multipactoring is a non-linear phenomenon that appears in high-power microwave equipment operating under vacuum conditions and causes several undesirable effects. In this paper, a theoretical and experimental study of the RF spectrum radiated by a multipactor discharge, occurring within a realistic microwave component based on rectangular waveguides, is reported. The electromagnetic coupling of a multipactor current to the fundamental propagative mode of a uniform waveguide has been analysed in the context of the microwave network theory. The discharge produced under a single-carrier RF voltage regime has been approached as a shunt current source exciting such a mode in a transmission-line gap region. By means of a simple equivalent circuit, this model allows prediction of the harmonics generated by the discharge occurring in a realistic passive waveguide component. Power spectrum radiated by a third-order multipactor discharge has been measured in an E-plane silver-plated waveguide transformer, thus validating qualitatively the presented theory to simulate the noise generated by a single-carrier multipactor discharge.

  6. Analysis of the multipactor effect in circular waveguides excited by two orthogonal polarization waves

    International Nuclear Information System (INIS)

    Pérez, A. M.; Boria, V. E.; Gimeno, B.; Anza, S.; Vicente, C.; Gil, J.

    2014-01-01

    Circular waveguides, either employed as resonant cavities or as irises connecting adjacent guides, are widely present in many passive components used in different applications (i.e., particle accelerators and satellite subsystems). In this paper, we present the study of the multipactor effect in circular waveguides considering the coexistence of the two polarizations of the fundamental TE 11 circular waveguide mode. For a better understanding of the problem, only low multipactor orders have been explored as a function of the polarization ellipse eccentricity. Special attention has been paid to the linear and circular polarizations, but other more general configurations have also been explored

  7. Analysis of the multipactor effect in circular waveguides excited by two orthogonal polarization waves

    Energy Technology Data Exchange (ETDEWEB)

    Pérez, A. M.; Boria, V. E. [Departamento de Comunicaciones-iTEAM, Universidad Politécnica de Valencia Camino de Vera s/n, 46022 Valencia (Spain); Gimeno, B. [Departamento de Física Aplicada y Electromagnetismo-ICMUV, Universitat de València c/Dr. Moliner, 50, 46100 Valencia (Spain); Anza, S.; Vicente, C.; Gil, J. [Aurora Software and Testing S.L., Edificio de Desarrollo Empresarial 9B, Universidad Politécnica de Valencia, Camino de Vera s/n, 46022 Valencia (Spain)

    2014-08-15

    Circular waveguides, either employed as resonant cavities or as irises connecting adjacent guides, are widely present in many passive components used in different applications (i.e., particle accelerators and satellite subsystems). In this paper, we present the study of the multipactor effect in circular waveguides considering the coexistence of the two polarizations of the fundamental TE{sub 11} circular waveguide mode. For a better understanding of the problem, only low multipactor orders have been explored as a function of the polarization ellipse eccentricity. Special attention has been paid to the linear and circular polarizations, but other more general configurations have also been explored.

  8. Multipactor in a Coaxial Line Under the Presence of an Axial DC Magnetic Field

    CERN Document Server

    González-Iglesias, D; Anza, S; Vague, J; Gimeno, B; Boria, V E; Raboso, D; Vicente, C; Gil, J; Caspers, F; Conde, L

    2012-01-01

    The main goal of this letter is the analysis of the multipactor effect within a coaxial waveguide structure when an external axial dc magnetic field is applied. We have designed and manufactured a coaxial waveguide sample that has been immersed within a long solenoid. Numerical and experimental results confirm a significant change in the RF breakdown behavior with regard to the case without the axial dc magnetic field, as well as the existence of single- and double-surface multipactor regimes. Good agreement between theory and experimental data has been found.

  9. Multipactor simulations in superconducting cavities and power couplers

    Directory of Open Access Journals (Sweden)

    G. Devanz

    2001-01-01

    Full Text Available A new computer code for simulation of multipacting phenomenon in axisymmetrical radio frequency structures is presented. The existence of resonant electron trajectories can lead to electron multiplication under given field and surface conditions and can damage these accelerator components or prevent their use. The goal of the simulation is to detect such occurrences. Therefore, large parameter sets have to be tested; a parallel version of the code has been developed to reduce computing time while dealing with highly demanding cases in terms of accuracy and parameter sweeping. Both superconducting cavities and power coupler components have been studied. Simulation results are compared with experimental measurements.

  10. White Paper on Multicarrier Excitation of Multipactor Breakdown: A Survey of Current Methods and Research Opportunities

    Science.gov (United States)

    2015-06-18

    Distribution Statement A: Approved for public release; distribution unlimited. i Executive Summary Multipactor breakdown is a failure mode that...in a parallel plate waveguide or coaxial structure). The basic formula for the transit time is provided below, = 2 Where X...cases, according to the literature [1], the lowest frequency of the operating bandwidth is used. For the special case of equally-spaced carrier

  11. Experimental and simulational result multipactors in 112 MHz QWR injector

    Energy Technology Data Exchange (ETDEWEB)

    Xin, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Ben-Zvi, I. [Brookhaven National Lab. (BNL), Upton, NY (United States); Stony Brook Univ., NY (United States); Belomestnykh, S. [Brookhaven National Lab. (BNL), Upton, NY (United States); Stony Brook Univ., NY (United States); Brutus, J. C. [Brookhaven National Lab. (BNL), Upton, NY (United States); Skaritka, J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Wu, Q. [Brookhaven National Lab. (BNL), Upton, NY (United States); Xiao, B. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-05-03

    The first RF commissioning of 112 MHz QWR superconducting electron gun was done in late 2014. The coaxial Fundamental Power Coupler (FPC) and Cathode Stalk (stalk) were installed and tested for the first time. During this experiment, we observed several multipacting barriers at different gun voltage levels. The simulation work was done within the same range. The comparison between the experimental observation and the simulation results are presented in this paper. The observations during the test are consisted with the simulation predictions. We were able to overcome most of the multipacting barriers and reach 1.8 MV gun voltage under pulsed mode after several round of conditioning processes.

  12. Electronic security systems better ways to crime prevention

    CERN Document Server

    Walker, Philip

    2013-01-01

    Electronic Security Systems: Better Ways to Crime Prevention teaches the reader about the application of electronics for security purposes through the use of case histories, analogies, anecdotes, and other related materials. The book is divided into three parts. Part 1 covers the concepts behind security systems - its objectives, limitations, and components; the fundamentals of space detection; detection of intruder movement indoors and outdoors; surveillance; and alarm communication and control. Part 2 discusses equipments involved in security systems such as the different types of sensors,

  13. [Electronic media in obesity prevention in childhood and adolescence].

    Science.gov (United States)

    Weihrauch-Blüher, Susann; Koormann, Stefanie; Brauchmann, Jana; Wiegand, Susanna

    2016-11-01

    The increasing prevalence of childhood obesity is - amongst other factors - due to changed leisure time habits with decreased physical activity and increased media consumption. However, electronic media such as tablets and smartphones might also provide a novel intervention approach to prevent obesity in childhood and adolescence. A summary of interventions applying electronic media to prevent childhood obesity is provided to investigate short term effects as well as long term results of these interventions. A systematic literature search was performed in PubMed/Web of Science to identify randomized and/or controlled studies that have investigated the efficacy of electronic media for obesity prevention below the age of 18. A total of 909 studies were identified, and 88 studies were included in the analysis. Active video games did increase physical activity compared to inactive games when applied within a peer group. Interventions via telephone had positive effects on certain lifestyle-relevant behaviours. Interventions via mobile were shown to decrease dropout rates by sending regular SMS messages. To date, interventions via smartphones are scarce for adolescents; however, they might improve cardiorespiratory fitness. The results from internet-based interventions showed a trend towards positive effects on lifestyle-relevant behaviors. The combination of different electronic media did not show superior results compared to interventions with only one medium. Interventions via TV, DVD or video-based interventions may increase physical activity when offered as an incentive, however, effects on weight status were not observed. Children and adolescents currently grow up in a technology- and media-rich society with computers, tablets, smartphones, etc. used daily. Thus, interventions applying electronic media to prevent childhood obesity are contemporary. Available studies applying electronic media are however heterogeneous in terms of applied medium and duration

  14. Calculations of secondary electron yield of graphene coated copper for vacuum electronic applications

    Directory of Open Access Journals (Sweden)

    H. K. A. Nguyen

    2018-01-01

    Full Text Available The suppression of secondary electron yield (SEY which can possibly lead to multipactor is an important goal for several applications. Though some techniques have focused on geometric modifications to lower the SEY, the use of graphene coatings as thin as a few monolayers is a promising new development that deserves attention either as a standalone technique or in concert with geometric alterations. Here we report on Monte Carlo based numerical studies of SEY on graphene coated copper with comparisons to recent experimental data. Our predicted values are generally in good agreement with reported measurements. Suppression of the secondary electron yield by as much as 50 percent (over copper with graphene coating is predicted at energies below 125 eV, and bodes well for multipactor suppression in radio frequency applications.

  15. Secondary Electron Yield from Plasma-Treated Niobium

    Science.gov (United States)

    Basovic, Milos; Tiskumara, Rajintha; Samolov, Ana; Cuckov, Filip; Popovic, Svetozar; Vuskovic, Leposava

    2012-10-01

    Future room-size linear accelerators, incorporated in compact light sources and medical therapeutic systems, will use Superconducting Radio Frequency (SRF) cavities to achieve the required beam energy over limited distances. The inhibiting phenomena in these designs are among others resonant multipactor discharges. Present study is intended to help complex cavity surface modification leading to mitigation of multipactors. Behavior of the multipactor discharges depends on the microwave field configuration and on the Secondary Electron Yield (SEY) from the cavity surface. Contaminated surfaces show substantial increase of SEY. Our aim is to reduce SEY using in-situ surface treatment with microwave discharge. We have developed an experimental set up to study the effect of plasma surface treatment on SEY. The system is designed to measure energy distribution of SEY on coin like samples under different incident angles. Clean, contaminated, and plasma-treated samples are placed in a carousel target manifold. Samples and the manifold are manipulated by robotic arm providing multiple degrees of freedom of a whole target system. Here we are reporting our progress and preliminary results from testing the Nb surface samples.

  16. Application of Electronic Business in Safe Accident Prevention and Control on Coalface

    Science.gov (United States)

    Lu, Guozhi; Tang, Jianquan; Yao, Chunhui; Yang, Lei

    In this paper, by analyzing the coal mine safety accident of present stage, the author has come to a conclusion that the safe accidents on coalface accounting for a lot of coal mine safety accident, and has brought forward the cause leading to this phenomenon. Then, through the discussion about "Overlying Strata Movement Law", this author has suggested that Electronic Business can be used for the coal mine to prevent and control safe accident on coalface, and has given out the operating pattern of Electronic Business innovatively. This conclusions are most instructive to Chinese coal mine in managing safe accident on coalface and innovative for application of Electronic Business in coal mine safety.

  17. Preventive and corrective maintenance for MINT EPS 3000 electron beam machine

    International Nuclear Information System (INIS)

    Siti Aiasah Hashim; Shaari Jahar

    2005-01-01

    Preventive and corrective maintenance of a high energy electron is to ensure that the machine would not fail during operation. MINT's EPS 3000 electron beam machine has been in operation for almost 12 years. Throughout those years, events relating to scheduled overhauls and unscheduled corrective maintenance had provided invaluable experience in the form of informal maintenance training to the operators. With the implementation of ISO 9001:2000 Quality Management System at the facility, the preventive and corrective maintenance program is becoming more structured and orderly. Collected maintenance data shall be used to initiate continual improvement activities in the facility.This paper describes MINT-ALURTRON's 12 years experience in providing maintenance work for the EPS 3000. (Author)

  18. Perioperative management for the prevention of bacterial infection in cardiac implantable electronic device placement

    Directory of Open Access Journals (Sweden)

    Katsuhiko Imai

    2016-08-01

    Full Text Available Cardiac implantable electronic devices (CIEDs have become important in the treatment of cardiac disease and placement rates increased significantly in the last decade. However, despite the use of appropriate antimicrobial prophylaxis, CIED infection rates are increasing disproportionately to the implantation rate. CIED infection often requires explantation of all hardware, and at times results in death. Surgical site infection (SSI is the most common cause of CIED infection as a pocket infection. The best method of combating CIED infection is prevention. Prevention of CIED infections comprises three phases: before, during, and after device implantation. The most critical factors in the prevention of SSIs are detailed operative techniques including the practice of proper technique by the surgeon and surgical team.

  19. Electronic Cigarette: Role in the Primary Prevention of Oral Cavity Cancer

    Directory of Open Access Journals (Sweden)

    Teresa Franco

    2016-01-01

    Full Text Available Background Cigarette smoke has been identified as the main cause of oral cavity carcinoma. Recently, the electronic cigarette, a battery-operated device, was developed to help smokers stop their tobacco addiction. This study aimed to evaluate the safety of electronic cigarettes and to establish the possible role of such device in the primary prevention of oral cavity cancer. Subjects and Methods This study included 65 subjects who were divided into three groups (smokers, e-cigarette smokers, and nonsmokers. All subjects were submitted to cytologic examination by scraping of oral mucosa. The slides were microscopically evaluated through a micronucleus assay test. Results The prevalence of micronuclei was significantly decreased in the e-cigarette smoker group. There were no statistically significant differences in micronuclei distribution according to the type of cigarette, gender, and age. Conclusions The use of electronic cigarettes seems to be safe for oral cells and should be suggested as an aid to smoking cessation.

  20. Improving patient access to prevent sight loss: ophthalmic electronic referrals and communication (Scotland).

    Science.gov (United States)

    Khan, A A; Mustafa, M Z; Sanders, R

    2015-02-01

    With the number of people with sight loss predicted to double to four million people in the UK by the year 2050, preventable visual loss is a significant public health issue. Sight loss is associated with an increased risk of falls, accidents and depression and evidence suggests that 50% of sight loss can be avoided. Timely diagnosis is central to the prevention of sight loss. Access to care can be a limiting factor in preventable cases. By improving referrals and access to hospital eye services it is possible to treat and minimise the number of patients with preventable sight loss and the impact this has on wider society. In 2005, NHS Fife took part in a flagship pilot funded by the Scottish government e-health department to evaluate the feasibility, safety, clinical effectiveness, and cost of electronic referral with images of patients directly from community optometrists to Hospital Eye Service (HES). The pilot study showed that electronic referral was feasible, fast, safe, and obviated the need for outpatient appointments in 128 (37%) patients with a high patient satisfaction. The results of the pilot study were presented and in May 2007, the electronic referral system was rolled out regionally in southeast Scotland. Referrals were accepted at a single site with vetting by a trained team and appointments were allocated within 48 hours. Following the implementation of electronic referral, waiting times were reduced from a median of 14 to 4 weeks. Significantly fewer new patients were seen (7462 vs 8714 [p communication between community optometry practices and hospital eye departments. Five electronic forms were specifically designed for cataract, glaucoma, macula, paediatric and general ophthalmic disease. A Virtual Private Network was created which enabled optometrists to connect to the Scottish clinical information gateway system and send referrals to hospital and receive referral status feedback. Numerous hurdles have been encountered and overcome in order

  1. Toward sensitive graphene nanoribbon-nanopore devices by preventing electron beam-induced damage.

    Science.gov (United States)

    Puster, Matthew; Rodríguez-Manzo, Julio A; Balan, Adrian; Drndić, Marija

    2013-12-23

    Graphene-based nanopore devices are promising candidates for next-generation DNA sequencing. Here we fabricated graphene nanoribbon-nanopore (GNR-NP) sensors for DNA detection. Nanopores with diameters in the range 2-10 nm were formed at the edge or in the center of graphene nanoribbons (GNRs), with widths between 20 and 250 nm and lengths of 600 nm, on 40 nm thick silicon nitride (SiN(x)) membranes. GNR conductance was monitored in situ during electron irradiation-induced nanopore formation inside a transmission electron microscope (TEM) operating at 200 kV. We show that GNR resistance increases linearly with electron dose and that GNR conductance and mobility decrease by a factor of 10 or more when GNRs are imaged at relatively high magnification with a broad beam prior to making a nanopore. By operating the TEM in scanning TEM (STEM) mode, in which the position of the converged electron beam can be controlled with high spatial precision via automated feedback, we were able to prevent electron beam-induced damage and make nanopores in highly conducting GNR sensors. This method minimizes the exposure of the GNRs to the beam before and during nanopore formation. The resulting GNRs with unchanged resistances after nanopore formation can sustain microampere currents at low voltages (∼50 mV) in buffered electrolyte solution and exhibit high sensitivity, with a large relative change of resistance upon changes of gate voltage, similar to pristine GNRs without nanopores.

  2. Electronic Information Standards to Support Obesity Prevention and Bridge Services Across Systems, 2010-2015.

    Science.gov (United States)

    Wiltz, Jennifer L; Blanck, Heidi M; Lee, Brian; Kocot, S Lawrence; Seeff, Laura; McGuire, Lisa C; Collins, Janet

    2017-10-26

    Electronic information technology standards facilitate high-quality, uniform collection of data for improved delivery and measurement of health care services. Electronic information standards also aid information exchange between secure systems that link health care and public health for better coordination of patient care and better-informed population health improvement activities. We developed international data standards for healthy weight that provide common definitions for electronic information technology. The standards capture healthy weight data on the "ABCDs" of a visit to a health care provider that addresses initial obesity prevention and care: assessment, behaviors, continuity, identify resources, and set goals. The process of creating healthy weight standards consisted of identifying needs and priorities, developing and harmonizing standards, testing the exchange of data messages, and demonstrating use-cases. Healthy weight products include 2 message standards, 5 use-cases, 31 LOINC (Logical Observation Identifiers Names and Codes) question codes, 7 healthy weight value sets, 15 public-private engagements with health information technology implementers, and 2 technical guides. A logic model and action steps outline activities toward better data capture, interoperable systems, and information use. Sharing experiences and leveraging this work in the context of broader priorities can inform the development of electronic information standards for similar core conditions and guide strategic activities in electronic systems.

  3. Effects of electromagnetic shielding cases for semiconductor-type electronic personal dosimeters on preventing electromagnetic interference

    International Nuclear Information System (INIS)

    Deji, Shizuhiko; Ito, Shigeki; Nishizawa, Kunihide; Saze, Takuya; Mori, Kazuyuki

    2005-01-01

    Performance of electromagnetic shielding cases for preventing malfunction of semiconductor-type electronic personal dosimeters (SEPDs) caused by high frequency electromagnetic fields emitted from a digital cellular telephone (cell phone) and a card reader of access control system were analyzed. The cases were handcrafted by using cloth of activated carbon fiber, polyester film laminated metal, and two kinds of metal netting. Five kinds of SEPDs put in the cases were exposed to the high frequency electromagnetic fields for 50 sec or 1 min. The cases prevented perfectly the malfunction due to the cell phone. The cases shortened distances required to prevent the malfunction due to the card reader, but did not prevent the malfunction. The electromagnetic immunity level of SEPD inserted in the cases increased from greater than 11.2 to greater than 18.7 times for the cell phone and from 1.1 to greater than 4.3 times for the card reader. The maximum of electromagnetic shielding effectiveness of each case was greater than 18.7 times for the cell phone and greater than 4.3 times for the card reader. (author)

  4. Single-dose electron beam irradiation in treatment and prevention of keloids and hypertrophic scars

    International Nuclear Information System (INIS)

    Lo, T.C.M.; Salzman, F.A.; Seckel, B.R.; Wright, K.A.

    1990-01-01

    Low megavolt electron beam irradiation was used on 354 sites in 199 patients at Lahey Clinic either for palliation of symptomatic hypertrophic scars or as post operative irradiation in an attempt to prevent formation or recurrence of hypertrophic scars. Electron energies used ranged from 1.5 to 3.5 MeV. The median age of the 59 male patients was 22 years and of the 140 female patients 35 years. All patients had at least one follow-up visit, and the median follow-up was 35 months. Of the 294 sites treated for the first time, 272 (93 per cent) were irradiated with a single fraction with a skin dose ranging from 2 to 20 Gy. Of the 85 sites in 63 patients without excision of symptomatic hypertrophic scars, single-dose electron beam irradiation was of clinically significant value in only 41 sites (48 per cent). No patients have been treated without surgical excision since 1973. Because of a history of formation of hypertrophic scars elsewhere in the body, 13 patients with 19 incisions were treated prophylactically after operation for other diseases. All sites were irradiated with single doses ranging from 8 to 20 Gy, and hypertrophic scars did not subsequently develop in any patient. Altogether, 119 patients with 174 sites were irradiated after surgical excision of hypertrophic scars to prevent recurrence; 168 sites (97 per cent) received singe-fraction irradiation, and 161 received a dose of 8 Gy greater, up to 15 Gy. No statistically significant differences were observed in complete success rates, ranging from 82 to 90 per cent with doses of 9 Gy or greater. An interval of up to 72h between excision and single-fraction irradiation satisfactorily prevented recurrence, and clinically significant chronic telangiectasia was recorded in only one patient. Postoperative low megavolt electron beam irradiation with a single dose of 9 Gy or greater is highly effective in the prevention of formation recurrence of hypertrophic scars or keloids. (author). 31 refs.; 2 figs.; 4 tabs

  5. Point-of-care cluster randomized trial in stroke secondary prevention using electronic health records.

    Science.gov (United States)

    Dregan, Alex; van Staa, Tjeerd P; McDermott, Lisa; McCann, Gerard; Ashworth, Mark; Charlton, Judith; Wolfe, Charles D A; Rudd, Anthony; Yardley, Lucy; Gulliford, Martin C; Trial Steering Committee

    2014-07-01

    The aim of this study was to evaluate whether the remote introduction of electronic decision support tools into family practices improves risk factor control after first stroke. This study also aimed to develop methods to implement cluster randomized trials in stroke using electronic health records. Family practices were recruited from the UK Clinical Practice Research Datalink and allocated to intervention and control trial arms by minimization. Remotely installed, electronic decision support tools promoted intensified secondary prevention for 12 months with last measure of systolic blood pressure as the primary outcome. Outcome data from electronic health records were analyzed using marginal models. There were 106 Clinical Practice Research Datalink family practices allocated (intervention, 53; control, 53), with 11 391 (control, 5516; intervention, 5875) participants with acute stroke ever diagnosed. Participants at trial practices had similar characteristics as 47,887 patients with stroke at nontrial practices. During the intervention period, blood pressure values were recorded in the electronic health records for 90% and cholesterol values for 84% of participants. After intervention, the latest mean systolic blood pressure was 131.7 (SD, 16.8) mm Hg in the control trial arm and 131.4 (16.7) mm Hg in the intervention trial arm, and adjusted mean difference was -0.56 mm Hg (95% confidence interval, -1.38 to 0.26; P=0.183). The financial cost of the trial was approximately US $22 per participant, or US $2400 per family practice allocated. Large pragmatic intervention studies may be implemented at low cost by using electronic health records. The intervention used in this trial was not found to be effective, and further research is needed to develop more effective intervention strategies. http://www.controlled-trials.com. Current Controlled Trials identifier: ISRCTN35701810. © 2014 American Heart Association, Inc.

  6. An electronic trigger based on care escalation to identify preventable adverse events in hospitalised patients.

    Science.gov (United States)

    Bhise, Viraj; Sittig, Dean F; Vaghani, Viralkumar; Wei, Li; Baldwin, Jessica; Singh, Hardeep

    2018-03-01

    Methods to identify preventable adverse events typically have low yield and efficiency. We refined the methods of Institute of Healthcare Improvement's Global Trigger Tool (GTT) application and leveraged electronic health record (EHR) data to improve detection of preventable adverse events, including diagnostic errors. We queried the EHR data repository of a large health system to identify an 'index hospitalization' associated with care escalation (defined as transfer to the intensive care unit (ICU) or initiation of rapid response team (RRT) within 15 days of admission) between March 2010 and August 2015. To enrich the record review sample with unexpected events, we used EHR clinical data to modify the GTT algorithm and limited eligible patients to those at lower risk for care escalation based on younger age and presence of minimal comorbid conditions. We modified the GTT review methodology; two physicians independently reviewed eligible 'e-trigger' positive records to identify preventable diagnostic and care management events. Of 88 428 hospitalisations, 887 were associated with care escalation (712 ICU transfers and 175 RRTs), of which 92 were flagged as trigger-positive and reviewed. Preventable adverse events were detected in 41 cases, yielding a trigger positive predictive value of 44.6% (reviewer agreement 79.35%; Cohen's kappa 0.573). We identified 7 (7.6%) diagnostic errors and 34 (37.0%) care management-related events: 24 (26.1%) adverse drug events, 4 (4.3%) patient falls, 4 (4.3%) procedure-related complications and 2 (2.2%) hospital-associated infections. In most events (73.1%), there was potential for temporary harm. We developed an approach using an EHR data-based trigger and modified review process to efficiently identify hospitalised patients with preventable adverse events, including diagnostic errors. Such e-triggers can help overcome limitations of currently available methods to detect preventable harm in hospitalised patients. © Article

  7. Utility of electronic patient records in primary care for stroke secondary prevention trials

    Directory of Open Access Journals (Sweden)

    Ashworth Mark

    2011-02-01

    Full Text Available Abstract Background This study aimed to inform the design of a pragmatic trial of stroke prevention in primary care by evaluating data recorded in electronic patient records (EPRs as potential outcome measures. The study also evaluated achievement of recommended standards of care; variation between family practices; and changes in risk factor values from before to after stroke. Methods Data from the UK General Practice Research Database (GPRD were analysed for 22,730 participants with an index first stroke between 2003 and 2006 from 414 family practices. For each subject, the EPR was evaluated for the 12 months before and after stroke. Measures relevant to stroke secondary prevention were analysed including blood pressure (BP, cholesterol, smoking, alcohol use, body mass index (BMI, atrial fibrillation, utilisation of antihypertensive, antiplatelet and cholesterol lowering drugs. Intraclass correlation coefficients (ICC were estimated by family practice. Random effects models were fitted to evaluate changes in risk factor values over time. Results In the 12 months following stroke, BP was recorded for 90%, cholesterol for 70% and body mass index (BMI for 47%. ICCs by family practice ranged from 0.02 for BP and BMI to 0.05 for LDL and HDL cholesterol. For subjects with records available both before and after stroke, the mean reductions from before to after stroke were: mean systolic BP, 6.02 mm Hg; diastolic BP, 2.78 mm Hg; total cholesterol, 0.60 mmol/l; BMI, 0.34 Kg/m2. There was an absolute reduction in smokers of 5% and heavy drinkers of 4%. The proportion of stroke patients within the recommended guidelines varied from less than a third (29% for systolic BP, just over half for BMI (54%, and over 90% (92% on alcohol consumption. Conclusions Electronic patient records have potential for evaluation of outcomes in pragmatic trials of stroke secondary prevention. Stroke prevention interventions in primary care remain suboptimal but important

  8. Prevention

    Science.gov (United States)

    ... Error processing SSI file About Heart Disease & Stroke Prevention Heart disease and stroke are an epidemic in ... secondhand smoke. Barriers to Effective Heart Disease & Stroke Prevention Many people with key risk factors for heart ...

  9. Integrating Hazardous Materials Characterization and Assessment Tools to Guide Pollution Prevention in Electronic Products and Manufacturing

    Science.gov (United States)

    Lam, Carl

    Due to technology proliferation, the environmental burden attributed to the production, use, and disposal of hazardous materials in electronics have become a worldwide concern. The major theme of this dissertation is to develop and apply hazardous materials assessment tools to systematically guide pollution prevention opportunities in the context of electronic product design, manufacturing and end-of-life waste management. To this extent, a comprehensive review is first provided on describing hazard traits and current assessment methods to evaluate hazardous materials. As a case study at the manufacturing level, life cycle impact assessment (LCIA)-based and risk-based screening methods are used to quantify chemical and geographic environmental impacts in the U.S. printed wiring board (PWB) industry. Results from this industrial assessment clarify priority waste streams and States to most effectively mitigate impact. With further knowledge of PWB manufacturing processes, select alternative chemical processes (e.g., spent copper etchant recovery) and material options (e.g., lead-free etch resist) are discussed. In addition, an investigation on technology transition effects for computers and televisions in the U.S. market is performed by linking dynamic materials flow and environmental assessment models. The analysis forecasts quantities of waste units generated and maps shifts in environmental impact potentials associated with metal composition changes due to product substitutions. This insight is important to understand the timing and waste quantities expected and the emerging toxic elements needed to be addressed as a consequence of technology transition. At the product level, electronic utility meter devices are evaluated to eliminate hazardous materials within product components. Development and application of a component Toxic Potential Indicator (TPI) assessment methodology highlights priority components requiring material alternatives. Alternative

  10. Preventing vacuum leaks in the Continuous Electron Beam Accelerator Facility cavity pair bellows

    International Nuclear Information System (INIS)

    Henkel, D.P.; Doolittle, L.R.

    1994-01-01

    Occasional vacuum leaks have occurred in bellows assemblies of helium pressure vessels at the Continuous Electron Beam Accelerator Facility. The flanged stainless steel bellows assemblies are used to connect the niobium rf cavity pairs to the surrounding liquid helium pressure vessels. An investigation of the source of these leaks has revealed a through-thickness network of microcracks in the cuff weld zones. The cuff material contained a mixture of soft and very hard elongated intermetallic inclusions that were oriented parallel with the weld fusion line; these inclusions served as crack initiation sites. Surface-exposed inclusions, in contact with a chlorine residue from a postweld machining process, induced crevice corrosion during a year of storage. Residual stresses in the weld led to a combination of lamellar tearing and stress corrosion cracking. Propagation of the cracks from one inclusion to another resulted in continuous vacuum leakage paths from the primary (2 K) helium circuit to the vacuum insulation space. Additional vacuum leaks were prevented by reconfiguring the weld geometry and avoiding any processing with chlorinated substances

  11. Notification determining technical standards concerning prevention of radiation injuries by electron capture detectors for gas chromatography

    International Nuclear Information System (INIS)

    1981-01-01

    This rule is established under the provisions of the law on the prevention of radiation injuries by radioisotopes, the ordinance and the regulation for the execution of the law. This rule is applied to electron capture detectors for gas chromatography under the law. Basic terms are defined, such as detector radiation source, detector container and carrier gas. The detectors shall consist of detector radiation sources and containers, and the containers must be such that the radiation sources can not be easily taken away and never cause the danger to fall off. The induction and discharge mouths of the detector containers shall be shut tightly with caps, etc. The main structures and radiation sources of detectors shall be made of materials, which are difficult to corrode, and do not melt and easily cause chemical change below 800 deg. C. Detector radiation sources shall be made of metals plated with nickel 63 less than 20 milli-curie. The radiation dose rate on the surface of a detector shall be shielded to less than 0.06 milli-rem an hour. The temperature of detectors and carrier gas shall not exceed 350 deg. C. Corrosive gas shall not be used as carrier gas. The period of effective indication is 5 years. The method of washing, and the conditions of leak, heat-resistance and shock-resistance examinations are defined, respectively. (Okada, K.)

  12. Prevention

    Science.gov (United States)

    ... Contact Aging & Health A to Z Find a Geriatrics Healthcare Professional Medications & Older Adults Making Your Wishes ... Prevention Hearing Loss Heart Attack High Blood Pressure Nutrition Osteoporosis Shingles Skin Cancer Related News Quitting Smoking, ...

  13. Prevention

    DEFF Research Database (Denmark)

    Halken, S; Høst, A

    2001-01-01

    , breastfeeding should be encouraged for 4-6 months. In high-risk infants a documented extensively hydrolysed formula is recommended if exclusive breastfeeding is not possible for the first 4 months of life. There is no evidence for preventive dietary intervention neither during pregnancy nor lactation...... populations. These theories remain to be documented in proper, controlled and prospective studies. Breastfeeding and the late introduction of solid foods (>4 months) is associated with a reduced risk of food allergy, atopic dermatitis, and recurrent wheezing and asthma in early childhood. In all infants....... Preventive dietary restrictions after the age of 4-6 months are not scientifically documented....

  14. Vacuum electronics applications at CERN

    CERN Document Server

    Jensen, E

    2009-01-01

    CERN operates a large number of vacuum electronics based RF power amplifiers covering a wide frequency range – over 300 sockets with 24 different grid tubes and klystrons are in use and require constant care to insure reliable operation of the accelerators. This is in particular true for the LHC and its injector chain, for which a program of improvement and stepwise upgrade has started. These include IOT’s for the SPS and klystrons and modulators for Linac4 and SPL. The CLIC study and the CTF3 facility are relevant to vacuum electronics in many ways: The CLIC primary RF power, to be provided at 1 GHz, requires highest possible efficiency and phase stability, MBK’s are likely candidates. The CLIC RF power source and CTF3 are themselves large vacuum electronics applications, consequently there are areas of common interest and concern, including fabrication techniques, pulse compression techniques, breakdown and multipactor theory and simulation, material fatigue, numerical analysis of slow-wave structures...

  15. Using an electronic detonator system and expanded blast patterns to prevent sympathetic detonation at Powder River Basin coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Yang, R.; Fleetwood, K.; Haid, J. [Orica USA Inc., Watkins, CO (United States). Advanced Mining Solutions

    2005-07-01

    This paper describes a systematic approach to prevent cast blast holes from detonating sympathetically through the use of the electronic initiation and expanded blast patterns. In-situ measurements were recorded from pressure probes, velocity of detonation probes and near field accelerometers, along with digital images generated from a high speed CCD camera. Large diameter angled drill holes were also checked for any measurable amount of deviation by a cable type borehole measurement tool. The field measurements provided the scientific evidence, statistical data, and documentation necessary to develop a sound method or a 'road map' that would minimize and in some situations prevent the occurrence of blast hole sympathetic detonation. 2 refs., 3 figs.

  16. Point-of-care cluster randomized trial in stroke secondary prevention using electronic health records

    NARCIS (Netherlands)

    Dregan, Alex; van Staa, Tjeerd P; McDermott, Lisa; McCann, Gerard; Ashworth, Mark; Charlton, Judith; Wolfe, Charles D A; Rudd, Anthony; Yardley, Lucy; Gulliford, Martin C

    BACKGROUND AND PURPOSE: The aim of this study was to evaluate whether the remote introduction of electronic decision support tools into family practices improves risk factor control after first stroke. This study also aimed to develop methods to implement cluster randomized trials in stroke using

  17. Impact of the implementation of electronic guidelines for cardiovascular prevention in primary care: study protocol

    Directory of Open Access Journals (Sweden)

    Eva Comin

    2013-03-01

    Full Text Available Background The electronic medical records software of the Catalan Institute of Health has recently incorporated an electronic version of clinical practice guidelines (e-CPGs. This study aims to assess the impact of the implementation of e-CPGs on the diagnosis, treatment, control and management of hypercholesterolaemia, diabetes mellitus type 2 and hypertension.Methods Eligible study participants are those aged 35–74 years assigned to family practitioners (FPs of the Catalan Institute of Health. Routinely collected data from electronic primary care registries covering 80% of the Catalan population will be analysed using two approaches: (1 a cross-sectional study to describe the characteristics of the sample before e-CPG implementation; (2 a controlled before-and-after study with 1-year follow-up to ascertain the effect of e-CPG implementation. Patients of FPs who regularly use the e-CPGs will constitute the intervention group; the control group will comprise patients assigned to FPs not regularly using the e-CPG. The outcomes are: (1 suspected and confirmed diagnoses, (2 control of clinical variables, (3 requests for tests and (4 proportions of patients with adequate drug prescriptions.Results This protocol should represent a reproducible process to assess the impact of the implementation of e-CPGs. We anticipate reporting results in late 2013.Conclusion This project will assess the effectiveness of e-CPGs to improve clinical decisions and healthcare procedures in the three disorders analysed. The results will shed light on the use of evidence-based medicine to improve clinical practice of FPs.

  18. The PreCardio-study protocol – a randomized clinical trial of a multidisciplinary electronic cardiovascular prevention programme

    Directory of Open Access Journals (Sweden)

    Jacobs Nele

    2007-09-01

    Full Text Available Abstract Background Cardiovascular diseases (CVD are the leading cause of death and the third cause of disability in Europe. Prevention programmes should include interventions aimed at a reduction of medical risk factors (hypertension, hypercholesterol, hyperglycemia, overweight and obesity as well as behavioural risk factors (sedentary lifestyle, high fat intake and low fruit and vegetable intake, smoking. The aim of this study is to investigate the effects of a multifaceted, multidisciplinary electronic prevention programme on cardiovascular risk factors. Methods/Design In a randomized controlled trial, one group will receive a maximal intervention (= intervention group. The intervention group will be compared to the control group receiving a minimal intervention. An inclusion of 350 patients in total, with a follow-up of 3 years is foreseen. The inclusion criteria are age between 25–65 and insured by the Onderlinge Ziekenkas, insuring for guaranteed income in case of illness for self-employed. The maximal intervention group receives several prevention consultations by their general practitioner (GP using a new type of cardiovascular risk calculator with personalised feedback on behavioural risk factors. These patients receive a follow-up with intensive support of health behaviour change via different methods, i.e. a tailored website and personal advice of a multidisciplinary team (psychologist, physiotherapist and dietician. The aim of this strategy is to reduce cardiovascular risk factors according to the guidelines. The primary outcome measures will be cardiovascular risk factors. The secondary outcome measures are cardiovascular events, quality of life, costs and incremental cost effectiveness ratios. The control group receives prevention consultations using a new type of cardiovascular risk calculator and general feedback. Discussion This trial incorporates interventions by GPs and other health professionals aiming at a reduction of

  19. Defect prevention in silica thin films synthesized using AP-PECVD for flexible electronic encapsulation

    Science.gov (United States)

    Elam, Fiona M.; Starostin, Sergey A.; Meshkova, Anna S.; van der Velden-Schuermans, Bernadette C. A. M.; van de Sanden, Mauritius C. M.; de Vries, Hindrik W.

    2017-06-01

    Industrially and commercially relevant roll-to-roll atmospheric pressure-plasma enhanced chemical vapour deposition was used to synthesize smooth, 80 nm silica-like bilayer thin films comprising a dense ‘barrier layer’ and comparatively porous ‘buffer layer’ onto a flexible polyethylene 2,6 naphthalate substrate. For both layers, tetraethyl orthosilicate was used as the precursor gas, together with a mixture of nitrogen, oxygen and argon. The bilayer films demonstrated exceptionally low effective water vapour transmission rates in the region of 6.1  ×  10-4 g m-2 d-1 (at 40 °C, 90% relative humidity), thus capable of protecting flexible photovoltaics and thin film transistors from degradation caused by oxygen and water. The presence of the buffer layer within the bilayer architecture was mandatory in order to achieve the excellent encapsulation performance. Atomic force microscopy in addition to solvent permeation measurements, confirmed that the buffer layer prevented the formation of performance-limiting defects in the bilayer thin films, which likely occur as a result of excessive plasma-surface interactions during the deposition process. It emerged that the primary function of the buffer layer was therefore to act as a protective coating for the flexible polymer substrate material.

  20. Electron beam treatment technology for exhaust gas for preventing acid rain

    International Nuclear Information System (INIS)

    Aoki, Shinji

    1990-01-01

    Recently, accompanying the increase of the use of fossil fuel, the damage due to acid rain such as withering of trees and extinction of fishes and shells has occurred worldwide, and it has become a serious problem. The sulfur oxides and nitrogen oxides contained in exhaust gas are oxidized by the action of sunbeam to become sulfuric acid and nitric acid mists, which fall in the form of rain. Acid rain is closely related to the use of the coal containing high sulfur, and it hinders the use of coal which is rich energy source. In order to simplify the processing system for boiler exhaust gas and to reduce waste water and wastes, Ebara Corp. developed the dry simultaneous desulfurizing and denitrating technology utilizing electron beam in cooperation with Japan Atomic Energy Research Institute. The flow chart of the system applied to the exhaust gas treatment in a coal-fired thermal power station is shown. The mechanism of desulfurization and denitration, and the features of this system are described. The demonstration plant was constructed in a coal-fired thermal power station in Indianapolis, Indiana, USA, and the trial operation was completed in July, 1987. The test results are reported. (K.I.)

  1. HF electronic tubes. Technologies, grid tubes and klystrons

    International Nuclear Information System (INIS)

    Lemoine, Th.

    2009-01-01

    This article gives an overview of the basic technologies of electronic tubes: cathodes, electronic optics, vacuum and high voltage. Then the grid tubes, klystrons and inductive output tubes (IOT) are introduced. Content: 1 - context and classification; 2 - electronic tube technologies: cathodes, electronic optics, magnetic confinement (linear tubes), periodic permanent magnet (PPM) focussing, collectors, depressed collectors; 3 - vacuum technologies: vacuum quality, surface effects and interaction with electrostatic and RF fields, secondary emission, multipactor effect, thermo-electronic emission; 4 - grid tubes: operation of a triode, tetrodes, dynamic operation and classes of use, 'common grid' and 'common cathode' operation, ranges of utilisation and limitations, operation of a tetrode on unadjusted load, lifetime of a tetrode, uses of grid tubes; 5 - klystrons: operation, impact of space charge, multi-cavity klystrons, interaction efficiency, extended interaction klystrons, relation between interaction efficiency, perveance and efficiency, ranges of utilization and power limitations, multi-beam klystrons and sheet beam klystrons, operation on unadjusted load, klystron band pass and lifetime, uses; 6 - IOT: principle of operation, ranges of utilisation and limitations, interaction efficiency and depressed collector IOT, IOT lifetime and uses. (J.S.)

  2. Using the Electronic Health Record Data in Real Time and Predictive Analytics to Prevent Hospital-Acquired Postoperative/Surgical Site Infections.

    Science.gov (United States)

    Falen, Thomas; Noblin, Alice M; Russell, O Lucia; Santiago, Nonica

    Of critical concern to hospitals today is the prevention of postoperative (surgical site) infections that often result in increased lengths of stays for patients, increased resource demands and costs, loss of public trust and lawsuits, and needless pain and suffering for patients and their families. While all surgical patients have the potential to develop a postoperative infection, the main challenge is to identify key risk factors (both patient centered and operational) through an electronic early-warning system to reduce the likelihood of a postoperative infection from occurring. Currently, most postoperative infection risk prevention practices encompass limited use of informatics technologies or do not maximize the potential benefits. In addition, from a research perspective, there has been more focus on extrapolating electronically housed data (eg, from progress notes, operative notes, laboratory, pharmacy, radiology) retrospectively to describe poor patient outcomes for benchmarking purposes (revealing poor results and opportunities for improvement) rather than using similar sources of real-time data to prevent poor patient outcomes from occurring. This article proposes that standardized indicators, both patient centered and operational, linked to the patient's electronic health record could allow for implementation of 24/7, "real-time" monitoring/surveillance to implement well-timed preventive interventions scaled to each patient and facility to assist caregivers in reducing the numbers of postoperative infections and improve the overall quality and costs of patient care.

  3. Electronic health record-based patient identification and individualized mailed outreach for primary cardiovascular disease prevention: a cluster randomized trial.

    Science.gov (United States)

    Persell, Stephen D; Lloyd-Jones, Donald M; Friesema, Elisha M; Cooper, Andrew J; Baker, David W

    2013-04-01

    Many individuals at higher risk for cardiovascular disease (CVD) do not receive recommended treatments. Prior interventions using personalized risk information to promote prevention did not test clinic-wide effectiveness. To perform a 9-month cluster-randomized trial, comparing a strategy of electronic health record-based identification of patients with increased CVD risk and individualized mailed outreach to usual care. Patients of participating physicians with a Framingham Risk Score of at least 5 %, low-density lipoprotein (LDL)-cholesterol level above guideline threshold for drug treatment, and not prescribed a lipid-lowering medication were included in the intention-to-treat analysis. Patients of physicians randomized to the intervention group were mailed individualized CVD risk messages that described benefits of using a statin (and controlling hypertension or quitting smoking when relevant). The primary outcome was occurrence of a LDL-cholesterol level, repeated in routine practice, that was at least 30 mg/dl lower than prior. A secondary outcome was lipid-lowering drug prescribing. Clinicaltrials.gov identifier: NCT01286311. Fourteen physicians with 218 patients were randomized to intervention, and 15 physicians with 217 patients to control. The mean patient age was 60.7 years and 77% were male. There was no difference in the primary outcome (11.0 % vs. 11.1 %, OR 0.99, 95 % CI 0.56-1.74, P = 0.96), but intervention group patients were twice as likely to receive a prescription for lipid-lowering medication (11.9 %, vs. 6.0 %, OR 2.13, 95 % CI 1.05-4.32, p = 0.038). In post hoc analysis with extended follow-up to 18 months, the primary outcome occurred more often in the intervention group (22.5 % vs. 16.1 %, OR 1.59, 95 % CI 1.05-2.41, P = 0.029). In this effectiveness trial, individualized mailed CVD risk messages increased the frequency of new lipid-lowering drug prescriptions, but we observed no difference in proportions lowering LDL

  4. Examining Evidence-Based Content Related to Hospital Acquired Pressure Ulcer Prevention in Paper and Electronic Health Records

    Science.gov (United States)

    Jaekel, Camilla M.

    2012-01-01

    Although there have been great advancements in the Electronic Health Record (EHR), there is a dearth of rigorous research that examines the relationship between the use of electronic documentation to capture nursing process components and the impact of consistent documentation on patient outcomes (Daly, Buckwalter & Maas, 2002; Gugerty, 2006;…

  5. ELECTRONIC SIGNATURES

    African Journals Online (AJOL)

    10332324

    (a) facilitate ecommerce;2. (b) remove and prevent barriers to electronic communications in South Africa;3. (c) ensure that electronic transactions in the Republic conform to the highest international standards;4. (d) promote the development of electronic transactions services which are responsive to the needs of users and ...

  6. Expansion of electronic health record-based screening, prevention, and management of diabetes in New York City.

    Science.gov (United States)

    Albu, Jeanine; Sohler, Nancy; Matti-Orozco, Brenda; Sill, Jordan; Baxter, Daniel; Burke, Gary; Young, Edwin

    2013-01-01

    To address the increasing burden of diabetes in New York City, we designed 2 electronic health records (EHRs)-facilitated diabetes management systems to be implemented in 6 primary care practices on the West Side of Manhattan, a standard system and an enhanced system. The standard system includes screening for diabetes. The enhanced system includes screening and ensures close patient follow-up; it applies principles of the chronic care model, including community-clinic linkages, to the management of patients newly diagnosed with diabetes and prediabetes through screening. We will stagger implementation of the enhanced system across the 6 clinics allowing comparison, through a quasi-experimental design (pre-post difference with a control group), of patients treated in the enhanced system with similar patients treated in the standard system. The findings could inform health system practices at multiple levels and influence the integration of community resources into routine diabetes care.

  7. Electronic health record-based assessment of cardiovascular health: The stroke prevention in healthcare delivery environments (SPHERE study

    Directory of Open Access Journals (Sweden)

    Randi E. Foraker

    2016-12-01

    Full Text Available <3% of Americans have ideal cardiovascular health (CVH. The primary care encounter provides a setting in which to conduct patient-provider discussions of CVH. We implemented a CVH risk assessment, visualization, and decision-making tool that automatically populates with electronic health record (EHR data during the encounter in order to encourage patient-centered CVH discussions among at-risk, yet under-treated, populations. We quantified five of the seven CVH behaviors and factors that were available in The Ohio State University Wexner Medical Center's EHR at baseline (May–July 2013 and compared values to those ascertained at one-year (May–July 2014 among intervention (n = 109 and control (n = 42 patients. The CVH of women in the intervention clinic improved relative to the metrics of body mass index (16% to 21% ideal and diabetes (62% to 68% ideal, but not for smoking, total cholesterol, or blood pressure. Meanwhile, the CVH of women in the control clinic either held constant or worsened slightly as measured using those same metrics. Providers need easy-to-use tools at the point-of-care to help patients improve CVH. We demonstrated that the EHR could deliver such a tool using an existing American Heart Association framework, and we noted small improvements in CVH in our patient population. Future work is needed to assess how to best harness the potential of such tools in order to have the greatest impact on the CVH of a larger patient population.

  8. Evaluation ofEnterococcus faecalisadhesion, penetration, and method to prevent the penetration ofEnterococcus faecalisinto root cementum: Confocal laser scanning microscope and scanning electron microscope analysis.

    Science.gov (United States)

    Halkai, Rahul S; Hegde, Mithra N; Halkai, Kiran R

    2016-01-01

    To ascertain the role of Enterococcus faecalis in persistent infection and a possible method to prevent the penetration of E. faecalis into root cementum. One hundred and twenty human single-rooted extracted teeth divided into five groups. Group I (control): intact teeth, Group II: no apical treatment done, Group III divided into two subgroups. In Groups IIIa and IIIb, root apex treated with lactic acid of acidic and neutral pH, respectively. Group IV: apical root cementum exposed to lactic acid and roughened to mimic the apical resorption. Group V: apical treatment done same as Group IV and root-end filling done using mineral trioxide aggregate (MTA). Apical one-third of all samples immersed in E. faecalis broth for 8 weeks followed by bone morphogenetic protein and obturation and again immersed into broth for 8 weeks. Teeth split into two halves and observed under confocal laser scanning microscope and scanning electron microscope, organism identified by culture and polymerase chain reaction techniques. Adhesion and penetration was observed in Group IIIa and Group IV. Only adhesion in Group II and IIIB and no adhesion and penetration in Group I and V. Adhesion and penetration of E. faecalis into root cementum providing a long-term nidus for subsequent infection are the possible reason for persistent infection and root-end filling with MTA prevents the adhesion and penetration.

  9. Construction of a Multisite DataLink Using Electronic Health Records for the Identification, Surveillance, Prevention, and Management of Diabetes Mellitus: The SUPREME-DM Project

    Science.gov (United States)

    Desai, Jay; Elston Lafata, Jennifer; Lawrence, Jean M.; O’Connor, Patrick J.; Pathak, Ram D.; Raebel, Marsha A.; Reid, Robert J.; Selby, Joseph V.; Silverman, Barbara G.; Steiner, John F.; Stewart, W.F.; Vupputuri, Suma; Waitzfelder, Beth

    2012-01-01

    Introduction Electronic health record (EHR) data enhance opportunities for conducting surveillance of diabetes. The objective of this study was to identify the number of people with diabetes from a diabetes DataLink developed as part of the SUPREME-DM (SUrveillance, PREvention, and ManagEment of Diabetes Mellitus) project, a consortium of 11 integrated health systems that use comprehensive EHR data for research. Methods We identified all members of 11 health care systems who had any enrollment from January 2005 through December 2009. For these members, we searched inpatient and outpatient diagnosis codes, laboratory test results, and pharmaceutical dispensings from January 2000 through December 2009 to create indicator variables that could potentially identify a person with diabetes. Using this information, we estimated the number of people with diabetes and among them, the number of incident cases, defined as indication of diabetes after at least 2 years of continuous health system enrollment. Results The 11 health systems contributed 15,765,529 unique members, of whom 1,085,947 (6.9%) met 1 or more study criteria for diabetes. The nonstandardized proportion meeting study criteria for diabetes ranged from 4.2% to 12.4% across sites. Most members with diabetes (88%) met multiple criteria. Of the members with diabetes, 428,349 (39.4%) were incident cases. Conclusion The SUPREME-DM DataLink is a unique resource that provides an opportunity to conduct comparative effectiveness research, epidemiologic surveillance including longitudinal analyses, and population-based care management studies of people with diabetes. It also provides a useful data source for pragmatic clinical trials of prevention or treatment interventions. PMID:22677160

  10. Serious electronic games as behavioural change interventions in healthcare-associated infections and infection prevention and control: a scoping review of the literature and future directions.

    Science.gov (United States)

    Castro-Sánchez, Enrique; Kyratsis, Yiannis; Iwami, Michiyo; Rawson, Timothy M; Holmes, Alison H

    2016-01-01

    The uptake of improvement initiatives in infection prevention and control (IPC) has often proven challenging. Innovative interventions such as 'serious games' have been proposed in other areas to educate and help clinicians adopt optimal behaviours. There is limited evidence about the application and evaluation of serious games in IPC. The purposes of the study were: a) to synthesise research evidence on the use of serious games in IPC to support healthcare workers' behaviour change and best practice learning; and b) to identify gaps across the formulation and evaluation of serious games in IPC. A scoping study was conducted using the methodological framework developed by Arksey and O'Malley. We interrogated electronic databases (Ovid MEDLINE, Embase Classic + Embase, PsycINFO, Scopus, Cochrane, Google Scholar) in December 2015. Evidence from these studies was assessed against an analytic framework of intervention formulation and evaluation. Nine hundred sixty five unique papers were initially identified, 23 included for full-text review, and four finally selected. Studies focused on intervention inception and development rather than implementation. Expert involvement in game design was reported in 2/4 studies. Potential game users were not included in needs assessment and game development. Outcome variables such as fidelity or sustainability were scarcely reported. The growing interest in serious games for health has not been coupled with adequate evaluation of processes, outcomes and contexts involved. Explanations about the mechanisms by which game components may facilitate behaviour change are lacking, further hindering adoption.

  11. Electronic Aggression

    Centers for Disease Control (CDC) Podcasts

    2007-11-20

    Aggression is no longer limited to the school yard. New forms of electronic media, such as blogs, instant messaging, chat rooms, email, text messaging, and the internet are providing new arenas for youth violence to occur.  Created: 11/20/2007 by National Center for Injury Prevention and Control, Division of Violence Prevention.   Date Released: 11/28/2007.

  12. Prevention of Cardiac Implantable Electronic Device Infections: Single Operator Technique with Use of Povidone-Iodine, Double Gloving, Meticulous Aseptic/Antiseptic Measures and Antibiotic Prophylaxis.

    Science.gov (United States)

    Manolis, Antonis S; Melita, Helen

    2017-01-01

    Cardiac implantable electronic device (CIED) implantation is complicated by infection still at a worrisome rate of 2-5%. Since early on during device implantation procedures, we have adopted an infection-preventive technique which has hitherto resulted in effective prevention of infections. Herein we present our results of applying this technique by a single operator in a prospective series of 762 consecutive patients undergoing device implantation. A meticulous search for and treatment of active, occult, or smoldering infection was undertaken preoperatively. An aseptic/antiseptic technique was used for implantation of each device. Skin preparation is thorough with initial cleansing performed with alcohol followed by povidone-iodine 10% solution, which is also used in the wound and inside the pocket. In addition, we routinely use double gloving, and IV antibiotic prophylaxis 1 hour before and for 48 hours afterwards followed by oral antibiotic for 2-3 days after discharge. The skin is closed with absorbable sutures. The study includes 382 patients having a new pacemaker (n = 333) or battery change, system upgrade or lead revision (n = 49), and 380 patients having a new implantable cardioverter-defibrillator (ICD) (n = 296) or device replacement/upgrade/lead revision (n = 84). The pacemaker group, aged 70.2 ± 16.5 years, includes 18% VVI, 49% DDD, 29% VDD, and 4% cardiac resynchronization therapy (CRT) devices. The ICD group, aged 61.3 ± 13.0 years, with a mean ejection fraction of 36 ± 13%, includes 325 ICD and 55 CRT implants. Over 26.6 ± 33.4 months for the pacemaker group and 36.6 ± 38.3 months for the ICD group, infection occurred in one patient in each group (0.26%) having a device replacement. A consistent and strict approach of aseptic/antiseptic technique with the use of double gloving and povidone-iodine solution within the pocket plus a 4-day regimen of antibiotic prophylaxis minimizes infections in CIED implants. © 2016 Wiley Periodicals, Inc.

  13. Simulated electronic health record (Sim-EHR) curriculum: teaching EHR skills and use of the EHR for disease management and prevention.

    Science.gov (United States)

    Milano, Christina E; Hardman, Joseph A; Plesiu, Adeline; Rdesinski, Rebecca E; Biagioli, Frances E

    2014-03-01

    Electronic health records (EHRs) can improve many aspects of patient care, yet few formal EHR curricula exist to teach optimal use to students and other trainees. The Simulated EHR (Sim-EHR) curriculum was introduced in January 2011 at Oregon Health & Science University (OHSU) to provide learners with a safe hands-on environment in which to apply evidence-based guidelines while learning EHR skills. Using an EHR training platform identical to the OHSU EHR system, learners review and correct a simulated medical chart for a complex virtual patient with chronic diseases and years of fragmented care. They write orders and prescriptions, create an evidence-based plan of care for indicated disease prevention and management, and review their work in a small-group setting. Third-year students complete the Sim-EHR curriculum as part of the required family medicine clerkship; their chart work is assessed using a rubric tied to the curriculum's general and specific objectives. As of January 2014, 406 third-year OHSU medical students, on campus or at remote clerkship sites, and 21 OHSU internal medicine interns had completed simulated charts.In this article, the authors describe the development and implementation of the Sim-EHR curriculum, with a focus on use of the curriculum in the family medicine clerkship. They also share preliminary findings and lessons learned. They suggest that the Sim-EHR curriculum is an effective, interactive method for providing learners with EHR skills education while demonstrating how a well-organized chart helps ensure safe, efficient, and quality patient care.

  14. Serious electronic games as behavioural change interventions in healthcare-associated infections and infection prevention and control: a scoping review of the literature and future directions

    Directory of Open Access Journals (Sweden)

    Enrique Castro-Sánchez

    2016-10-01

    Full Text Available Abstract Background The uptake of improvement initiatives in infection prevention and control (IPC has often proven challenging. Innovative interventions such as ‘serious games’ have been proposed in other areas to educate and help clinicians adopt optimal behaviours. There is limited evidence about the application and evaluation of serious games in IPC. The purposes of the study were: a to synthesise research evidence on the use of serious games in IPC to support healthcare workers’ behaviour change and best practice learning; and b to identify gaps across the formulation and evaluation of serious games in IPC. Methods A scoping study was conducted using the methodological framework developed by Arksey and O’Malley. We interrogated electronic databases (Ovid MEDLINE, Embase Classic + Embase, PsycINFO, Scopus, Cochrane, Google Scholar in December 2015. Evidence from these studies was assessed against an analytic framework of intervention formulation and evaluation. Results Nine hundred sixty five unique papers were initially identified, 23 included for full-text review, and four finally selected. Studies focused on intervention inception and development rather than implementation. Expert involvement in game design was reported in 2/4 studies. Potential game users were not included in needs assessment and game development. Outcome variables such as fidelity or sustainability were scarcely reported. Conclusions The growing interest in serious games for health has not been coupled with adequate evaluation of processes, outcomes and contexts involved. Explanations about the mechanisms by which game components may facilitate behaviour change are lacking, further hindering adoption.

  15. Electronics and electronic systems

    CERN Document Server

    Olsen, George H

    1987-01-01

    Electronics and Electronic Systems explores the significant developments in the field of electronics and electronic devices. This book is organized into three parts encompassing 11 chapters that discuss the fundamental circuit theory and the principles of analog and digital electronics. This book deals first with the passive components of electronic systems, such as resistors, capacitors, and inductors. These topics are followed by a discussion on the analysis of electronic circuits, which involves three ways, namely, the actual circuit, graphical techniques, and rule of thumb. The remaining p

  16. Choking Prevention

    Science.gov (United States)

    ... Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations At Home ...

  17. Evaporator line for special electron tubes, in particular electron multipliers

    International Nuclear Information System (INIS)

    Richter, M.

    1984-01-01

    The invention has been aimed at reducing the effort for preventing short circuits in achieving certain material-dependent effects e.g. secondary emission, by deposition through evaporation in the production of electron tubes, in particular electron multipliers

  18. Allergy prevention.

    Science.gov (United States)

    Muche-Borowski, Cathleen; Kopp, Matthias; Reese, Imke; Sitter, Helmut; Werfel, Thomas; Schäfer, Torsten

    2010-09-01

    The further increase of allergies in industrialized countries demands evidence-based measures of primary prevention. The recommendations as published in the guideline of 2004 were updated and consented on the basis of a systematic literature search. Evidence from the period February 2003-May 2008 was searched in the electronic databases Cochrane and MEDLINE as well as in reference lists of recent reviews and by contacting experts. The retrieved citations were screened for relevance first by title and abstract and in a second step as full paper. Levels of evidence were assigned to each included study and the methodological quality of the studies was assessed as high or low. Finally the revised recommendations were formally consented (nominal group process) by representatives of relevant societies and organizations including a self-help group. Of originally 4556 hits, 217 studies (4 Cochrane Reviews, 14 meta-analyses, 19 randomized controlled trials, 135 cohort and 45 case-control studies) were included and critically appraised. Grossly unchanged remained the recommendations on avoiding environmental tobacco smoke, breast-feeding over 4 months (alternatively hypoallergenic formulas for children at risk), avoiding a mold-promoting indoor climate, vaccination according to current recommendations, and avoidance of furry pets (especially cats) in children at risk. The recommendation on reducing the house dust mite allergen exposure as a measure of primary prevention was omitted and the impact of a delayed introduction of supplementary food was reduced. New recommendations were adopted concerning fish consumption (during pregnancy / breast-feeding and as supplementary food in the first year), avoidance of overweight, and reducing the exposure to indoor and outdoor air pollutants. The revision of this guideline on a profound evidence basis led to (1) a confirmation of existing recommendations, (2) substantial revisions, and (3) new recommendations. Thereby it is possible

  19. Role of l-carnitine in the prevention of seminiferous tubules damage induced by gamma radiation: a light and electron microscopic study

    International Nuclear Information System (INIS)

    Topcu-Tarladacalisir, Yeter; Kanter, Mehmet; Uzal, Mustafa Cem

    2009-01-01

    The present study, we hypothesized that l-carnitine can minimize germ-cell depletion and morphological features of late cell damage in the rat testis following gamma (γ)-irradiation. Wistar albino male rats were divided into three groups. Control group received physiological saline 0.2 ml intraperitoneally (i.p.), as placebo. Radiation group received scrotal γ-irradiation of 10 Gy as a single dose plus physiological saline. Radiation + l-carnitine group received scrotal γ-irradiation plus 200 mg/kg i.p. l-carnitine. l-carnitine starting 1 day before irradiation and 21 days (three times per week) after irradiation. Testis samples of the all groups were taken at day 21, 44 and 70 post-irradiation. All samples were processed at the light and electron microscopic levels. Morphologically, examination of γ-irradiated testis revealed presence of marked disorganization and depletion of germ cells, arrest of spermatogenesis, formation of multinucleated giant cells, and vacuolization in the germinal epithelium. The type and extent of these changes varied at different post-treatment intervals. The damage was evident at the 21st day and reached maximum level by the 44th day. By day 44 post-irradiation, the changes were most advanced, and were associated with atrophied seminiferous tubules without germ cells, the increase in the number and size of vacuolizations in germinal epithelium, and the absent multinucleated giant cells due to spermatids had completely disappeared. The increase in nucleus invaginations, the dilatation of smooth endoplasmic reticulum cysternas and the increase in the number and size of lipid droplets in the Sertoli cells were determined at the electron microscopic level. In conclusion, l-carnitine supplementation during the radiotherapy would be effective in protecting against radiation-induced damages in rat testis, and thereby may improve the quality of patient's life after the therapy. (orig.)

  20. Implementing an Electronic Event-Reporting System in a Radiation Oncology Department: The Effect on Safety Culture and Near-Miss Prevention.

    Science.gov (United States)

    Deraniyagala, Rohan; Liu, Chihray; Mittauer, Kathryn; Greenwalt, Julie; Morris, Christopher G; Yeung, Anamaria R

    2015-11-01

    We implemented an electronic event-reporting system to investigate its effect on quality improvement in our department. We developed an event-reporting program that launched in October 2012; data analysis was performed in January 2014. Events were logged by the radiation oncology staff and reviewed by our quality and safety committee on a biweekly basis. To measure the efficacy of the new program, and change in safety culture, a Likert-scale survey was administered before, and three months after, implementation of the event-reporting system. A total of 194 events were logged into the new system during a 15-month period (approximately 13 events per month), compared with 93 events in an 18-month period (approximately five events per month) before the program was launched. The average number of events reported by radiation therapists increased from 0.9 per month to 8.6 per month. The survey results showed a shift toward stronger agreement by staff members, in postimplementation versus preimplementation responses, when they were asked if they knew how to report an event in the department (P = .042), and if the current event-reporting system would reduce the incidence of future events (P = .032). Results showed a trend toward stronger agreement by staff members when they were asked if they felt more comfortable reporting events that they had observed (P = .093). Multiple safety action plans were implemented as a result of analysis of these events. An electronic event-reporting system streamlines quality and safety in a radiation oncology department by increasing reported events and promoting a safety culture. A program that is widely accessible, easy to use, and can analyze data meaningfully will be the most successful. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  1. Role of l-carnitine in the prevention of seminiferous tubules damage induced by gamma radiation: a light and electron microscopic study

    Energy Technology Data Exchange (ETDEWEB)

    Topcu-Tarladacalisir, Yeter; Kanter, Mehmet [Trakya University, Department of Histology and Embryology, Faculty of Medicine, Edirne (Turkey); Uzal, Mustafa Cem [Trakya University, Department of Radiation Oncology, Faculty of Medicine, Edirne (Turkey)

    2009-08-15

    The present study, we hypothesized that l-carnitine can minimize germ-cell depletion and morphological features of late cell damage in the rat testis following gamma ({gamma})-irradiation. Wistar albino male rats were divided into three groups. Control group received physiological saline 0.2 ml intraperitoneally (i.p.), as placebo. Radiation group received scrotal {gamma}-irradiation of 10 Gy as a single dose plus physiological saline. Radiation + l-carnitine group received scrotal {gamma}-irradiation plus 200 mg/kg i.p. l-carnitine. l-carnitine starting 1 day before irradiation and 21 days (three times per week) after irradiation. Testis samples of the all groups were taken at day 21, 44 and 70 post-irradiation. All samples were processed at the light and electron microscopic levels. Morphologically, examination of {gamma}-irradiated testis revealed presence of marked disorganization and depletion of germ cells, arrest of spermatogenesis, formation of multinucleated giant cells, and vacuolization in the germinal epithelium. The type and extent of these changes varied at different post-treatment intervals. The damage was evident at the 21st day and reached maximum level by the 44th day. By day 44 post-irradiation, the changes were most advanced, and were associated with atrophied seminiferous tubules without germ cells, the increase in the number and size of vacuolizations in germinal epithelium, and the absent multinucleated giant cells due to spermatids had completely disappeared. The increase in nucleus invaginations, the dilatation of smooth endoplasmic reticulum cysternas and the increase in the number and size of lipid droplets in the Sertoli cells were determined at the electron microscopic level. In conclusion, l-carnitine supplementation during the radiotherapy would be effective in protecting against radiation-induced damages in rat testis, and thereby may improve the quality of patient's life after the therapy. (orig.)

  2. Rape prevention

    Science.gov (United States)

    Date rape - prevention; Sexual assault - prevention ... Centers for Disease Control and Prevention website. Sexual assault and abuse and STDs. In: 2015 sexually transmitted diseases treatment guidelines 2015. www.cdc.gov/std/tg2015/sexual- ...

  3. Dengue Prevention

    Science.gov (United States)

    ... Address What's this? Submit What's this? Submit Button Prevention Recommend on Facebook Tweet Share Compartir This photograph ... medications to treat a dengue infection. This makes prevention the most important step, and prevention means avoiding ...

  4. Plague Prevention

    Science.gov (United States)

    ... Healthcare Professionals Clinicians Public Health Officials Veterinarians Prevention History of Plague Resources FAQ Prevention Recommend on Facebook Tweet Share Compartir Reduce rodent habitat around your ...

  5. FMECA Application to Intraoperative Electron Beam Radiotherapy Procedure As a Quality Method to Prevent and Reduce Patient’s Risk in Conservative Surgery for Breast Cancer

    Directory of Open Access Journals (Sweden)

    Cristiana Vidali

    2017-08-01

    Full Text Available IntroductionFailure Mode Effects and Criticalities Analysis (FMECA represents a prospective method for risk assessment in complex medical practices. Our objective was to describe the application of FMECA approach to intraoperative electron beam radiotherapy (IOERT, delivered using a mobile linear accelerator, for the treatment of early breast cancer as an anticipated boost.Materials and methodsA multidisciplinary Working Group, including several different professional profiles, was created before the beginning of clinical practice in 2012, with the purpose of writing the Flow Chart and applying the FMECA methodology to IOERT procedure. Several criticalities were identified a priori in the different steps of the procedure and a list of all potential failure modes (FMs was drafted and ranked using the risk priority number (RPN scoring system, based on the product of three parameters: severity, occurrence, and detectability (score between 1 and 5. The actions aimed at reducing the risk were then defined by the Working Group and the risk analysis was repeated in 2014 and in 2016, in order to assess the improvement achieved.ResultsFifty-one FMs were identified, which represented the issues prospectively investigated according to the FMECA methodology. Considering a set threshold of 30, the evaluated RPNs show that 33 out of 51 FMs are critical; 6 are included in the moderate risk class (RPN: 31–40; 16 in the intermediate risk class (RPN: 41–50, and 11 in the high risk class (RPN: >50.DiscussionThe most critical steps concerned the surgical procedure and IOERT set-up. The introduction of the corrective actions into the clinical practice achieved the reduction of the RPNs in the re-analysis of the FMECA worksheet after 2 and 4 years, respectively.ConclusionFMECA proved to be a useful tool for prospective evaluation of potential failures in IOERT and contributed to optimize patient safety and to improve risk management culture among all the

  6. Dynamics behind the scale up of evidence-based obesity prevention: protocol for a multi-site case study of an electronic implementation monitoring system in health promotion practice.

    Science.gov (United States)

    Conte, Kathleen P; Groen, Sisse; Loblay, Victoria; Green, Amanda; Milat, Andrew; Persson, Lina; Innes-Hughes, Christine; Mitchell, Jo; Thackway, Sarah; Williams, Mandy; Hawe, Penelope

    2017-12-06

    The effectiveness of many interventions to promote health and prevent disease has been well established. The imperative has therefore shifted from amassing evidence about efficacy to scale-up to maximise population-level health gains. Electronic implementation monitoring, or 'e-monitoring', systems have been designed to assist and track the delivery of preventive policies and programs. However, there is little evidence on whether e-monitoring systems improve the dissemination, adoption, and ongoing delivery of evidence-based preventive programs. Also, given considerable difficulties with e-monitoring systems in the clinical sector, scholars have called for a more sophisticated re-examination of e-monitoring's role in enhancing implementation. In the state of New South Wales (NSW), Australia, the Population Health Information Management System (PHIMS) was created to support the dissemination of obesity prevention programs to 6000 childcare centres and elementary schools across all 15 local health districts. We have established a three-way university-policymaker-practice research partnership to investigate the impact of PHIMS on practice, how PHIMS is used, and how achievement of key performance indicators of program adoption may be associated with local contextual factors. Our methods encompass ethnographic observation, key informant interviews and participatory workshops for data interpretation at a state and local level. We use an on-line social network analysis of the collaborative relationships across local health district health promotion teams to explore the relationship between PHIMS use and the organisational structure of practice. Insights will be sensitised by institutional theory, practice theory and complex adaptive system thinking, among other theories which make sense of socio-technical action. Our working hypothesis is that the science of getting evidence-based programs into practice rests on an in-depth understanding of the role they play in the on

  7. Electronic Cigarettes

    Science.gov (United States)

    ... New FDA Regulations Text Size: A A A Electronic Cigarettes Electronic cigarettes (e-cigarettes) are battery operated products designed to ... more about: The latest news and events about electronic cigarettes on this FDA page Electronic cigarette basics on ...

  8. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  9. The Electron

    Energy Technology Data Exchange (ETDEWEB)

    Thomson, George

    1972-01-01

    Electrons are elementary particles of atoms that revolve around and outside the nucleus and have a negative charge. This booklet discusses how electrons relate to electricity, some applications of electrons, electrons as waves, electrons in atoms and solids, the electron microscope, among other things.

  10. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  11. Preventing Addiction.

    Science.gov (United States)

    Moore, Susan Fordney

    The purpose of this paper is to provide the beginning counselor with an overview of prevention concepts. Prevention is a relatively new emphasis in community efforts to stem the rising costs of substance abuse and other high-risk behaviors. The paper discusses agent, host, and environmental prevention models and how they relate to causal theories…

  12. Electron radiography

    Science.gov (United States)

    Merrill, Frank E.; Morris, Christopher

    2005-05-17

    A system capable of performing radiography using a beam of electrons. Diffuser means receive a beam of electrons and diffuse the electrons before they enter first matching quadrupoles where the diffused electrons are focused prior to the diffused electrons entering an object. First imaging quadrupoles receive the focused diffused electrons after the focused diffused electrons have been scattered by the object for focusing the scattered electrons. Collimator means receive the scattered electrons and remove scattered electrons that have scattered to large angles. Second imaging quadrupoles receive the collimated scattered electrons and refocus the collimated scattered electrons and map the focused collimated scattered electrons to transverse locations on an image plane representative of the electrons' positions in the object.

  13. Prevention: Exercise

    Medline Plus

    Full Text Available ... Steroid Injections Lumbar Zygapophysical (Facet) Joint Injections PREVENTION Lifestyle Choices 10 Tips for a Healthy Back Smoking Weight Patient Safety Exercise Strengthening Strengthen ...

  14. Prevention: Exercise

    Medline Plus

    Full Text Available ... Injections PREVENTION Lifestyle Choices 10 Tips for a Healthy Back Smoking Weight Patient Safety Exercise Strengthening Strengthen Your Core! Stretching/Flexibility Aerobic Exercise ...

  15. Prevention: Exercise

    Medline Plus

    Full Text Available ... Watchful Waiting and Education Injection Treatments for Spinal Pain Epidural Steroid Injections Lumbar Zygapophysical (Facet) Joint Injections PREVENTION Lifestyle Choices 10 ...

  16. Coaxial TW window for power couplers and multipactor considerations

    International Nuclear Information System (INIS)

    Hanus, X.; Mosnier, A.

    1996-01-01

    A Traveling Wave coaxial window has been studied for power couplers purposes. The main features, a reduced electrical field in the ceramic and its multipacting free shape are presented. Multipacting simulations results for other window geometries, using a conical or a cylindrical ceramic are also showed. (author)

  17. Poison Prevention

    Science.gov (United States)

    ... Prevention Listen Español Text Size Email Print Share Poison Prevention Page Content Article Body Post the Poison Help number 1-800-222-1222 on the ... or empty container of a toxic substance, call Poison Help immediately. More than a million American children ...

  18. Electron detector

    International Nuclear Information System (INIS)

    Hashimoto, H.; Mogami, A.

    1975-01-01

    A device for measuring electron densities at a given energy level in an electron beam or the like having strong background noise, for example, in the detection of Auger electric energy spectrums is described. An electron analyzer passes electrons at the given energy level and at the same time electrons of at least one adjacent energy level. Detecting means associated therewith produce signals indicative of the densities of the electrons at each energy level and combine these signals to produce a signal indicative of the density of the electrons of the given energy level absent background noise

  19. Preventive analgesia

    DEFF Research Database (Denmark)

    Dahl, Jørgen B; Kehlet, Henrik

    2011-01-01

    This paper will discuss the concepts of pre-emptive and preventive analgesia in acute and persistent postsurgical pain, based on the most recent experimental and clinical literature, with a special focus on injury-induced central sensitization and the development from acute to chronic pain. Recent...... of preventive analgesia for persistent postoperative pain are promising. However, clinicians must be aware of the demands for improved design of their clinical studies in order to get more conclusive answers regarding the different avenues for intervention. Summary: The concept of preventive analgesia is still...

  20. Depressed collector for electron beams

    Science.gov (United States)

    Ives, R. Lawrence (Inventor)

    2005-01-01

    A depressed collector for recovery of spent beam energy from electromagnetic sources emitting sheet or large aspect ration annular electron beams operating aver a broad range of beam voltages and currents. The collector incorporates a trap for capturing and preventing the return of reflected and secondary electrons.

  1. Prevention: Exercise

    Medline Plus

    Full Text Available ... Exercise Strength Training for the Elderly Other Back Pack Safety Pregnancy and Back Pain Preventing Osteoporosis Back ... in very slightly. Hold a ball directly in front of you. Keep your abdominal muscles tight and ...

  2. Prevention: Exercise

    Medline Plus

    Full Text Available ... Tips for a Healthy Back Smoking Weight Patient Safety Exercise Strengthening Strengthen Your Core! Stretching/Flexibility Aerobic ... Strength Training for the Elderly Other Back Pack Safety Pregnancy and Back Pain Preventing Osteoporosis Back Pain ...

  3. Prevent Shingles

    Science.gov (United States)

    ... Submit What's this? Submit Button Past Emails Prevent Shingles Language: English (US) Español (Spanish) Recommend on Facebook ... that can result in vision loss. Older Adults & Shingles As you get older, you are more likely ...

  4. Prevention: Exercise

    Medline Plus

    Full Text Available ... Epidural Steroid Injections Lumbar Zygapophysical (Facet) Joint Injections PREVENTION Lifestyle Choices 10 Tips for a Healthy Back Smoking Weight Patient Safety Exercise Strengthening Strengthen Your Core! ...

  5. Prevention: Exercise

    Medline Plus

    Full Text Available ... and Education Injection Treatments for Spinal Pain Epidural Steroid Injections Lumbar Zygapophysical (Facet) Joint Injections PREVENTION Lifestyle ... Z Spine Specialists Videos 9 for Spine Epidural Steroid Injections Exercise: The Backbone of Spine Treatment Spondylolisthesis ...

  6. Prevention: Exercise

    Medline Plus

    Full Text Available ... A SPECIALIST Prevention Strengthening Exercise Committee Exercise Committee Core Strengthening Many popular forms of exercise focus on ... acute pain, you should stop doing it. Transverse Core Strengthening This strengthens the muscles that cross from ...

  7. Prevention: Exercise

    Medline Plus

    Full Text Available ... Lumbar Zygapophysical (Facet) Joint Injections PREVENTION Lifestyle Choices 10 Tips for a Healthy Back Smoking Weight Patient ... the floor; rotate from side to side. Repeat 10 times. Check with your physician; if you are ...

  8. Prevention: Exercise

    Medline Plus

    Full Text Available ... Pregnancy and Back Pain Preventing Osteoporosis Back Pain Basics Book RESOURCES Patient ... popular forms of exercise focus on core strengthening, or building the muscles that provide support for your body. Pilates, yoga and martial arts ...

  9. Electron/electron acoustic instability

    International Nuclear Information System (INIS)

    Gary, S.P.

    1987-01-01

    The electron acoustic wave becomes a normal mode of an unmagnetized collisionless plasma in the presence of two electron components with similar densities, but strongly disparate temperatures. The characteristic frequency of this mode is the plasma frequency of the cooler electron component. If these two electron components have a relative drift speed several times the thermal speed of the cooler component, the electron/electron acoustic instability may arise. This paper describes the parametric dependences of the threshold drift speed and maximum growth rate of this instability, and compares these with the same properties of the electron/ion acoustic instability. Under the condition of zero current, the electron/ion acoustic instability typically has the lower threshold drift speed, so that observation of the electron/electron acoustic instability is a strong indication of the presence of an electrical current in the plasma

  10. HIV Prevention

    Centers for Disease Control (CDC) Podcasts

    2012-02-01

    Dr. Kevin Fenton, Director of CDC’s National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention, talks about steps people can take to protect their health from HIV.  Created: 2/1/2012 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 2/1/2012.

  11. Electron Microscopy.

    Science.gov (United States)

    Beer, Michael

    1980-01-01

    Reviews technical aspects of structure determination in biological electron microscopy (EM). Discusses low dose EM, low temperature microscopy, electron energy loss spectra, determination of mass or molecular weight, and EM of labeled systems. Cites 34 references. (CS)

  12. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  13. Understand electronics

    CERN Document Server

    Bishop, Owen

    2013-01-01

    Understand Electronics provides a readable introduction to the exciting world of electronics for the student or enthusiast with little previous knowledge. The subject is treated with the minimum of mathematics and the book is extensively illustrated.This is an essential guide for the newcomer to electronics, and replaces the author's best-selling Beginner's Guide to Electronics.The step-by-step approach makes this book ideal for introductory courses such as the Intermediate GNVQ.

  14. Vacuum electronics

    CERN Document Server

    Eichmeier, Joseph A

    2008-01-01

    Nineteen experts from the electronics industry, research institutes and universities have joined forces to prepare this book. ""Vacuum Electronics"" covers the electrophysical fundamentals, the present state of the art and applications, as well as the future prospects of microwave tubes and systems, optoelectronics vacuum devices, electron and ion beam devices, light and X-ray emitters, particle accelerators and vacuum interrupters. These topics are supplemented by useful information about the materials and technologies of vacuum electronics and vacuum technology.

  15. Electronic Commerce

    OpenAIRE

    Slavko Đerić

    2016-01-01

    Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks...

  16. Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1989-01-01

    Describes various stages involved in the applications of electronic media to the publishing industry. Highlights include computer typesetting, or photocomposition; machine-readable databases; the distribution of publications in electronic form; computer conferencing and electronic mail; collaborative authorship; hypertext; hypermedia publications;…

  17. Modern electronic maintenance principles

    CERN Document Server

    Garland, DJ

    2013-01-01

    Modern Electronic Maintenance Principles reviews the principles of maintaining modern, complex electronic equipment, with emphasis on preventive and corrective maintenance. Unfamiliar subjects such as the half-split method of fault location, functional diagrams, and fault finding guides are explained. This book consists of 12 chapters and begins by stressing the need for maintenance principles and discussing the problem of complexity as well as the requirements for a maintenance technician. The next chapter deals with the connection between reliability and maintenance and defines the terms fai

  18. Basic electronics

    CERN Document Server

    Holbrook, Harold D

    1971-01-01

    Basic Electronics is an elementary text designed for basic instruction in electricity and electronics. It gives emphasis on electronic emission and the vacuum tube and shows transistor circuits in parallel with electron tube circuits. This book also demonstrates how the transistor merely replaces the tube, with proper change of circuit constants as required. Many problems are presented at the end of each chapter. This book is comprised of 17 chapters and opens with an overview of electron theory, followed by a discussion on resistance, inductance, and capacitance, along with their effects on t

  19. Sticker electronics

    KAUST Repository

    Hussain, Muhammad Mustafa

    2017-09-08

    Electronic stickers may be manufactured on flexible substrates (110, 120, 130) as layers and packaged together. The package may then have an adhesive applied to one side to provide capability for sticking the electronic devices to surfaces. The stickers can be wrappable, placed on surfaces, glued on walls or mirrors or wood or stone, and have electronics (112, 122, 132) which may or may not be ultrathin. Packaging for the electronic sticker can use polymer on cellulose manufacturing and/or three dimensional (3-D) printing. The electronic stickers may provide lighting capability, sensing capability, and/or recharging capabilities.

  20. Electron Tree

    DEFF Research Database (Denmark)

    Appelt, Ane L; Rønde, Heidi S

    2013-01-01

    The photo shows a close-up of a Lichtenberg figure – popularly called an “electron tree” – produced in a cylinder of polymethyl methacrylate (PMMA). Electron trees are created by irradiating a suitable insulating material, in this case PMMA, with an intense high energy electron beam. Upon discharge......, during dielectric breakdown in the material, the electrons generate branching chains of fractures on leaving the PMMA, producing the tree pattern seen. To be able to create electron trees with a clinical linear accelerator, one needs to access the primary electron beam used for photon treatments. We...... appropriated a linac that was being decommissioned in our department and dismantled the head to circumvent the target and ion chambers. This is one of 24 electron trees produced before we had to stop the fun and allow the rest of the accelerator to be disassembled....

  1. The electron and the electronics

    International Nuclear Information System (INIS)

    Sanchez Balmaseda, M.

    1997-01-01

    The aim of this work is to present a brief report of those historical events that originated and contributed to the scientific area of Electronics. The main discovering and investigations in both Vacuum Electronics and Semiconductor Electronics are reviewed. (Author) 12 refs

  2. Bullying Prevention

    Science.gov (United States)

    Kemp, Patrice

    2016-01-01

    The focus of the milestone project is to focus on bridging the gap of bullying and classroom instruction methods. There has to be a defined expectations and level of accountability that has to be defined when supporting and implementing a plan linked to bullying prevention. All individuals involved in the student's learning have to be aware of…

  3. Prevention: Exercise

    Medline Plus

    Full Text Available ... Strengthen Your Core! Stretching/Flexibility Aerobic Exercise Cervical Exercise Strength Training for the Elderly Other Back Pack Safety Pregnancy and Back Pain Preventing Osteoporosis Back Pain Basics Book RESOURCES ... The Backbone of Spine Treatment Spondylolisthesis BLOG FIND ...

  4. Prevent Pneumonia

    Centers for Disease Control (CDC) Podcasts

    2015-08-06

    CDC’s Matthew Westercamp explains what pneumonia is, its symptoms, and how to prevent it.  Created: 8/6/2015 by National Center for Immunization and Respiratory Diseases (NCIRD), Division of Bacterial Diseases (DBD), Respiratory Diseases Branch (RDB).   Date Released: 8/6/2015.

  5. HIV Prevention

    Science.gov (United States)

    ... Abroad Treatment Basic Statistics Get Tested Find an HIV testing site near you. Enter ZIP code or city Follow HIV/AIDS CDC HIV CDC HIV/AIDS See RSS | ... Collapse All Is abstinence the only 100% effective HIV prevention option? Yes. Abstinence means not having oral, ...

  6. Prevention: Exercise

    Medline Plus

    Full Text Available ... Information Feature Articles Patient Q&A Success Stories Definitions Anatomy of the Spine Definitions A-Z Spine Specialists Videos 9 for Spine Epidural Steroid Injections Exercise: The Backbone of Spine Treatment Spondylolisthesis BLOG FIND A SPECIALIST Prevention ...

  7. Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Slavko Đerić

    2016-12-01

    Full Text Available Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks, including the Internet. Electronic commerce is not limited just to buying and selling, but it also includes all pre-sales and after-sales ongoing activities along the supply chain. Introducing electronic commerce, using the Internet and Web services in business, realizes the way to a completely new type of economy - internet economy.

  8. Electron spectroscopy

    International Nuclear Information System (INIS)

    Hegde, M.S.

    1979-01-01

    An introduction to the various techniques in electron spectroscopy is presented. These techniques include: (1) UV Photoelectron spectroscopy, (2) X-ray Photoelectron spectroscopy, (3) Auger electron spectroscopy, (4) Electron energy loss spectroscopy, (5) Penning ionization spectroscopy and (6) Ion neutralization spectroscopy. The radiations used in each technique, the basis of the technique and the special information obtained in structure determination in atoms and molecules by each technique are summarised. (A.K.)

  9. Polymer electronics

    CERN Document Server

    Hsin-Fei, Meng

    2013-01-01

    Polymer semiconductor is the only semiconductor that can be processed in solution. Electronics made by these flexible materials have many advantages such as large-area solution process, low cost, and high performance. Researchers and companies are increasingly dedicating time and money in polymer electronics. This book focuses on the fundamental materials and device physics of polymer electronics. It describes polymer light-emitting diodes, polymer field-effect transistors, organic vertical transistors, polymer solar cells, and many applications based on polymer electronics. The book also disc

  10. Electron Bifurcation

    Energy Technology Data Exchange (ETDEWEB)

    Peters, John W.; Miller, Anne-Frances; Jones, Anne K.; King, Paul W.; Adams, Michael W. W.

    2016-04-01

    Electron bifurcation is the recently recognized third mechanism of biological energy conservation. It simultaneously couples exergonic and endergonic oxidation-reduction reactions to circumvent thermodynamic barriers and minimize free energy loss. Little is known about the details of how electron bifurcating enzymes function, but specifics are beginning to emerge for several bifurcating enzymes. To date, those characterized contain a collection of redox cofactors including flavins and iron-sulfur clusters. Here we discuss the current understanding of bifurcating enzymes and the mechanistic features required to reversibly partition multiple electrons from a single redox site into exergonic and endergonic electron transfer paths.

  11. Microfluidic electronics.

    Science.gov (United States)

    Cheng, Shi; Wu, Zhigang

    2012-08-21

    Microfluidics, a field that has been well-established for several decades, has seen extensive applications in the areas of biology, chemistry, and medicine. However, it might be very hard to imagine how such soft microfluidic devices would be used in other areas, such as electronics, in which stiff, solid metals, insulators, and semiconductors have previously dominated. Very recently, things have radically changed. Taking advantage of native properties of microfluidics, advances in microfluidics-based electronics have shown great potential in numerous new appealing applications, e.g. bio-inspired devices, body-worn healthcare and medical sensing systems, and ergonomic units, in which conventional rigid, bulky electronics are facing insurmountable obstacles to fulfil the demand on comfortable user experience. Not only would the birth of microfluidic electronics contribute to both the microfluidics and electronics fields, but it may also shape the future of our daily life. Nevertheless, microfluidic electronics are still at a very early stage, and significant efforts in research and development are needed to advance this emerging field. The intention of this article is to review recent research outcomes in the field of microfluidic electronics, and address current technical challenges and issues. The outlook of future development in microfluidic electronic devices and systems, as well as new fabrication techniques, is also discussed. Moreover, the authors would like to inspire both the microfluidics and electronics communities to further exploit this newly-established field.

  12. Electronics Industry

    National Research Council Canada - National Science Library

    Bell, Robert; Carroll-Garrison, Martina; Donovan, Daniel; Fisher, John; Guemmer, Paul; Harms, Robert; Kelly, Timothy; Love, Mattie; McReynolds, James; Ward, Ralph

    2006-01-01

    .... Government action to preserve strategic access to semiconductor producers is clearly needed to ensure DoD electronic systems can be built without compromising sensitive technology, though every...

  13. Isolated electrons

    Energy Technology Data Exchange (ETDEWEB)

    Ekstrom, Ph.; Winwland, D.

    1981-08-01

    The problem of electron g-factor measurement by means of an isolated electron is considered. The technique of the experiment performed at the Washington university is described. A single electron is enclosed in a homogeneous magnetic field which is superimposed by an electric field. The electric field configuration represents a Penning trap. The trap together with the enclosed electron forms an ''atom'' of macroscopic dimensions. The electron trajectory in the trap consists of three components. The electron quickly rotates over small loops (cyclotron motion), the centre of these loops slowly moves over a large circle (magistron motion). Meanwhile the electron oscillates back and forth along the trap axis. The electron motion in the atom field is quantized and the transitions between various types of motions correspond to definite radiation frequencies. At the anomal frequency the transition with spin flip is registered and the electron g-factor is measured. The value g=2.0023193044 is obtained with a probable error less than a unit of the last decimal digit.

  14. The electron

    International Nuclear Information System (INIS)

    Hestenes, David; Weingartshofer, Antonio

    1991-01-01

    The stupendous successes of the Dirac equation and quantum electro-dynamics have established the electron as the best understood of the fundamental constituents of matter. Nevertheless, physicists agree that the electron still has secrets to reveal. Moreover, powerful new theoretical and experimental tools for probing those secrets have been sharpened during the last decade. This workshop was organized to bring theorists and experimentalists together to discuss their common goal of knowing the electron. Present state and future prospects for progress toward that goal are here described. The theoretical papers encompass a wide range of views on the electron. Several argue that the 'Zitter-bewegung' is more than a mathematical peculiarity of the Dirac equation, that it may well be a real physical phenomenon and worthy of serious study, theoretically and experimentally. Besides generating the electron spin and magnetic moment, the 'Zitterbewegung' may be a vital clue to electron structure and self-interaction. Some of the papers employ a radical new formulation of the Dirac theory which reveals a hidden geo-metric structure in the theory that supports a 'Zitterbewegung' inter-pretation. For the last half century the properties of electrons have been probed primarily by scattering experiments at ever higher energies. Recently, however, two powerful new experimental techniques have emerged capable of giving alternative experimental views of the electron. First, techniques for confining single electrons for long term study have led to the most accurate measurements of the electron magnetic moment. Second, the interaction of high intensity laser fields with atoms and electrons have revealed striking new phenomena such as multiphoton ionization. refs.; figs.; tabs

  15. Electronic marketplaces

    OpenAIRE

    TALAFOUSOVÁ, Jana

    2011-01-01

    This thesis describes the principles of electronic and Internet marketplaces. For analyzing the status of the use of electronic marketplaces and online polling was done with the actual marketplace and society, which is a member of the marketplace. Proposal that trade through the market is prepared for a particular company, which previously traded through the marketplace.

  16. Printed Electronics

    Science.gov (United States)

    Crain, John M. (Inventor); Lettow, John S. (Inventor); Aksay, Ilhan A. (Inventor); Korkut, Sibel (Inventor); Chiang, Katherine S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2016-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  17. Power electronics

    Indian Academy of Sciences (India)

    Kishore Chatterjee

    reference material for power electronics engineers, students and academicians. We thank the editors of Sadhana for inviting us to guest-edit this special issue on power electronics. July 2017. KISHORE CHATTERJEE. Department of Electrical Engineering,. Indian Institute of Technology,. Bombay, Powai, Mumbai 400076, ...

  18. Electronic Commerce and Electronic Business

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    This special issue is motivated by the recent upsurge of research activity in the areas of electronic commerce and electronic business both in India and all over the world. The current research activity is quite intensive in the use of mathematical tools such as cryptography, game theory, mechanism design, optimization, ...

  19. Electronic identity

    CERN Document Server

    de Andrade, Norberto Nuno Gomes; Argles, David

    2014-01-01

    With the increasing availability of electronic services, security and a reliable means by which identity is verified is essential.Written by Norberto Andrade the first chapter of this book provides an overview of the main legal and regulatory aspects regarding electronic identity in Europe and assesses the importance of electronic identity for administration (public), business (private) and, above all, citizens. It also highlights the role of eID as a key enabler of the economy.In the second chapter Lisha Chen-Wilson, David Argles, Michele Schiano di Zenise and Gary Wills discuss the user-cent

  20. Electronic diagrams

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Diagrams is a ready reference and general guide to systems and circuit planning and in the preparation of diagrams for both newcomers and the more experienced. This book presents guidelines and logical procedures that the reader can follow and then be equipped to tackle large complex diagrams by recognition of characteristic 'building blocks' or 'black boxes'. The goal is to break down many of the barriers that often seem to deter students and laymen in learning the art of electronics, especially when they take up electronics as a spare time occupation. This text is comprised of nin

  1. Digital electronics

    CERN Document Server

    Morris, John

    2013-01-01

    An essential companion to John C Morris's 'Analogue Electronics', this clear and accessible text is designed for electronics students, teachers and enthusiasts who already have a basic understanding of electronics, and who wish to develop their knowledge of digital techniques and applications. Employing a discovery-based approach, the author covers fundamental theory before going on to develop an appreciation of logic networks, integrated circuit applications and analogue-digital conversion. A section on digital fault finding and useful ic data sheets completes th

  2. Starting electronics

    CERN Document Server

    Brindley, Keith

    2005-01-01

    Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material

  3. Polymer electronics

    CERN Document Server

    Geoghegan, Mark

    2013-01-01

    Polymer electronics is the science behind many important new developments in technology, such as the flexible electronic display (e-ink) and many new developments in transistor technology. Solar cells, light-emitting diodes, and transistors are all areas where plastic electronics is likely to, or is already having, a serious impact on our daily lives. With polymer transistors and light-emitting diodes now being commercialised, there is a clear need for a pedagogic text thatdiscusses the subject in a clear and concise fashion suitable for senior undergraduate and graduate students. The content

  4. Stretchable electronics

    CERN Document Server

    Someya, Takao

    2012-01-01

    With its comprehensive coverage this handbook and ready reference brings together some of the most outstanding scientists in the field to lay down the undisputed knowledge on how to make electronics stretchable.As such, it focuses on gathering and evaluating the materials, designs, models and technologies that enable the fabrication of fully elastic electronic devices which can sustain high strain. Furthermore, it provides a review of those specific applications that directly benefit from highly compliant electronics, including transistors, photonic devices and sensors. In addition to stre

  5. Electronic Elections

    DEFF Research Database (Denmark)

    Schürmann, Carsten

    2009-01-01

    Electronic voting technology is a two edged sword. It comes with many risks but brings also many benefits. Instead of flat out rejecting the technology as uncontrollably dangerous, we advocate in this paper a different technological angle that renders electronic elections trustworthy beyond...... the usual levels of doubt. We exploit the trust that voters currently have into the democratic process and model our techniques around that observation accordingly. In particular, we propose a technique of trace emitting computations to record the individual steps of an electronic voting machine...... for a posteriori validation on an acceptably small trusted computing base. Our technology enables us to prove that an electronic elections preserves the voter’s intent, assuming that the voting machine and the trace verifier are independent....

  6. Electron Scattering

    International Nuclear Information System (INIS)

    Li, Xiaodong; Lee, Kyong Sei; Shaw, J.J.; Bahri, C.

    1990-01-01

    Electron scattering is one of the best probes available to us to probe the nucleus. It has revealed to us, with unprecedented accuracy, the charge and current distributions of nuclei. It has provided us with positive evidence for meson exchange currents. It was used to 'discover' the quark and it revealed to us that nucleons may be modified in the nuclear environment (EMC Effect). In short, electron scattering has revolutionized the study of nuclear physics. Several recent developments will insure that electron beams which will soon become availabe at CEBAF, Bates and elsewhere will make high-precision coincidence experiments possible. As the technology is becoming available, we are just beginning to exploit polarization degrees of freedom in our experiments. In this paper, we will introduce the formalism of electron scattering, review what we have learned in the past and look ahead toward the future

  7. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...... emerging renewable energy sources, wind energy, which by means of power electronics are changing from being a minor energy source to be acting as an important power source in the energy system. Power electronics is the enabling technology and the presentation will cover the development in wind turbine...... technology from kW to MW, discuss which power electronic solutions are most feasible and used today....

  8. Paper electronics.

    Science.gov (United States)

    Tobjörk, Daniel; Österbacka, Ronald

    2011-05-03

    Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Electronic plants

    Science.gov (United States)

    Stavrinidou, Eleni; Gabrielsson, Roger; Gomez, Eliot; Crispin, Xavier; Nilsson, Ove; Simon, Daniel T.; Berggren, Magnus

    2015-01-01

    The roots, stems, leaves, and vascular circuitry of higher plants are responsible for conveying the chemical signals that regulate growth and functions. From a certain perspective, these features are analogous to the contacts, interconnections, devices, and wires of discrete and integrated electronic circuits. Although many attempts have been made to augment plant function with electroactive materials, plants’ “circuitry” has never been directly merged with electronics. We report analog and digital organic electronic circuits and devices manufactured in living plants. The four key components of a circuit have been achieved using the xylem, leaves, veins, and signals of the plant as the template and integral part of the circuit elements and functions. With integrated and distributed electronics in plants, one can envisage a range of applications including precision recording and regulation of physiology, energy harvesting from photosynthesis, and alternatives to genetic modification for plant optimization. PMID:26702448

  10. Electron Emitters

    National Research Council Canada - National Science Library

    Tzeng, Yonhua

    2002-01-01

    When two carbon-nanotube coated electrodes are placed at a small distance from each other, electron emission from carbon nanotubes allows a DC or AC electrical current to flow between these two electrodes...

  11. Electron Microprobe

    Data.gov (United States)

    Federal Laboratory Consortium — The JEOL JXA-8600 is a conventional hairpin filament thermal emission electron microprobe that is more than 20 years old. It is capable of performing qualitative and...

  12. Electronic spectroscopies

    OpenAIRE

    Weckhuysen, B.M.; Schoonheydt, R.A.

    2000-01-01

    Diffuse reflectance spectroscopy (DRS) in the ultraviolet, visible and near-infrared region is a versatile spectroscopic technique, as both d-d and charge transfer transitions of supported TMI can be probed. One of the advantages of electronic spectroscopy is that the obtained information is directly chemical since the outer shell electrons of the TMI are probed and provide information about the oxidation state and coordination environment of TMI on surfaces. Furthermore, the DRS technique ca...

  13. Electronic commerce

    OpenAIRE

    Zvolánková, Pavla

    2010-01-01

    The thesis deals with a description of electronic commerce from its beginning up to present situation in this area. It explains basic terms connected with electronic commerce and it summarizes the relevant legislation. Moreover it describes e-contracts and rights and duties of both contractual parties. The main view is the view of Internet retailer, which is reflected in the practical part focused on concrete problems of retailers.

  14. Spin Electronics

    Science.gov (United States)

    2003-08-01

    applications, a ferromagnetic metal may be used as a source of spin-polarized electronics to be injected into a semiconductor, a superconductor or a...physical phenomena in II-VI and III-V semiconductors. In II-VI systems, the Mn2+ ions act to boost the electron spin precession up to terahertz ...conductors, proximity effect between ferromagnets and superconductors , and the effects of spin injection on the physical properties of the

  15. Rotating preventers

    International Nuclear Information System (INIS)

    Tangedahl, M.J.; Stone, C.R.

    1992-01-01

    This paper reports that recent changes in the oil and gas industry and ongoing developments in horizontal and underbalanced drilling necessitated development of a better rotating head. A new device called the rotating blowout preventer (RBOP) was developed by Seal-Tech. It is designed to replace the conventional rotating control head on top of BOP stacks and allows drilling operations to continue even on live (underbalanced) wells. Its low wear characteristics and high working pressure (1,500 psi) allow drilling rig crews to drill safely in slightly underbalanced conditions or handle severe well control problems during the time required to actuate other BOPs in the stack. Drilling with a RBOP allows wellbores to be completely closed in tat the drill floor rather than open as with conventional BOPs

  16. Treating and Preventing Burns

    Science.gov (United States)

    ... Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations At Home ...

  17. Relapse prevention.

    Science.gov (United States)

    Hall, S M; Wasserman, D A; Havassy, B E

    1991-01-01

    Although knowledge about relapse prevention is still at an early stage, the extant data highlight the importance of several constructs. 1. Motivation for abstinence remains central. The construct itself is often clouded because of its association with mystical notions such as willpower and self-control. We know that manipulation of environmental events can increase motivation. These interventions are effective, however, only as long as the contingencies are in effect. We need to develop and evaluate strategies for transferring contingency management to the natural environment, that is, to institutions and groups that can perpetuate them for the long term. Also, clarification of the kinds of abstinence goals needed to prevent relapse is important. 2. Coping skills have been studied by several investigators, but research on these, except for job-finding skills, is not encouraging. The skills usually taught may be too basic. Skills training oriented to complex targets, such as building nondrug-using networks, may be useful and should be further explored. 3. Social support is clearly important, yet we do not know how best to use it to promote abstinence. The little research available suggests that both familial and nonfamilial systems should be mobilized. We need to define abstinence-promoting supportive behaviors, identify and engage important support systems in treatment, and help patients expand their nondrug-using contacts. 4. Negative affect may be causally related to relapse. We need to continue efforts to identify dysphoric patients and develop interventions to ameliorate dysphoria concurrent with drug abuse treatment (cf. Zweben and Smith 1989). 5. Drug cue reactivity and extinction to drug cues have been demonstrated in the laboratory. What is needed in this promising line of research are (1) investigation of cues and cue-reactivity phenomena in the natural environment or in conditions closely mimicking that environment and (2) extinction methods that transfer

  18. Spin electronics

    CERN Document Server

    Buhrman, Robert; Daughton, James; Molnár, Stephan; Roukes, Michael

    2004-01-01

    This report is a comparative review of spin electronics ("spintronics") research and development activities in the United States, Japan, and Western Europe conducted by a panel of leading U.S. experts in the field. It covers materials, fabrication and characterization of magnetic nanostructures, magnetism and spin control in magnetic nanostructures, magneto-optical properties of semiconductors, and magnetoelectronics and devices. The panel's conclusions are based on a literature review and a series of site visits to leading spin electronics research centers in Japan and Western Europe. The panel found that Japan is clearly the world leader in new material synthesis and characterization; it is also a leader in magneto-optical properties of semiconductor devices. Europe is strong in theory pertaining to spin electronics, including injection device structures such as tunneling devices, and band structure predictions of materials properties, and in development of magnetic semiconductors and semiconductor heterost...

  19. Electronic Commerce

    Energy Technology Data Exchange (ETDEWEB)

    Laird, N. [NRG Information Services Inc., Calgary, AB (Canada)

    1995-11-01

    The concept of electronic commerce in the gas industry was discussed. It was defined as the integration of communication technology, advanced information processing capability and business standards, to improve effectiveness of the business process. Examples of electronic data interchange from the automotive, airline, and banking industry were given. The objective of using this technology in the gas industry was described as the provision of one electronic facility to make seamless contractual and operational arrangements for moving natural gas across participating pipelines. The benefit of seamless integration - one readily available standard system used by several companies - was highlighted. A list of value-added services such as the free movement of bulletins, directories, nominations,and other documents was provided.

  20. Keeping electronic records secure.

    Science.gov (United States)

    Easton, David

    2013-10-01

    Are electronic engineering maintenance records relating to the hospital estate or a medical device as important as electronic patient records? Computer maintenance management systems (CMMS) are increasingly being used to manage all-round maintenance activities. However, the accuracy of the data held on them, and a level of security that prevents tampering with records, or other unauthorised changes to them to 'cover' poor practice, are both essential, so that, should an individual be injured or killed on hospital grounds, and a law suit follow, the estates team can be confident that it has accurate data to prove it has fulfilled its duty of care. Here David Easton MSc CEng FIHEEM MIET, director of Zener Engineering Services, and chair of IHEEM's Medical Devices Advisory Group, discusses the issues around maintenance databases, and the security and integrity of maintenance data.

  1. Polio and Prevention

    Science.gov (United States)

    ... Photo Collections Videos Polio Today → Polio + Prevention Polio + Prevention Polio and prevention Polio is a crippling and ... a child for life. Learn more about polio + prevention The Virus The Vaccines The Communities Related resources ...

  2. Diabetes Prevention Program (DPP)

    Science.gov (United States)

    ... Recruiting Patients & Families Consortia, Networks & Centers Reports & Planning Diabetes Prevention Program (DPP) The NIDDK-sponsored Diabetes Prevention ... Diabetes Prevention Program for those who are eligible. Diabetes Prevention Program (DPP) DPP Goal The DPP looked ...

  3. Prevention of relapsing backache

    Directory of Open Access Journals (Sweden)

    Raspe, Heiner

    2006-05-01

    methodological requirements of DAHTA. Proceedings of the electronic literature searches are documented in the appendix. In addition references of review articles were searched. Methodological quality of publications (systematic reviews, HTA reports was assessed using the checklists developed by the German Scientific Working Group for Technology Assessment in Health Care (GSWGTAHC or with the Jadad-Score (controlled trials respectively. Due to the large number of relevant publications the assessment is mainly based on data reported by systematic reviews and supplemented by the results of newer trials. A separate economic assessment was not performed because of the low amount of available data. An assessment of ethical, legal and social impact was omitted due to resource constraints.ResultsFor preventive interventions based on exercise programs most of the analysed trials demonstrate some effectiveness. Due to the heterogeneity of the programs it is not possible to conclude whether positive effects are associated with a special type, duration or intensity of exercise. For purely educational measures or information strategies applied in a workplace setting the available trials were not able to demonstrate effectiveness. Back school programs, which in addition to theoretical instructions offer intensive exercising may in the short term, be successful in reducing the incidence of new episodes of back pain. Some trials in high risk groups demonstrate effectiveness of multidimensional interventions on time lost from work. These programs include education and exercise as well as cognitive behavioural interventions to change pain perception. The assessment of the benefits of back belts for the prevention of back pain is based on results of high quality efficacy as well as effectiveness trials. Their results imply for the otherwise healthy working population no protective effect of back belts on time lost from work due to back pain, on the incidence of painful episodes or on days with

  4. Electron Cyclotron Waves

    International Nuclear Information System (INIS)

    Hoekzema, J.A.

    2004-01-01

    An introduction is given to plasma heating and current drive with electromagnetic waves in the electron cyclotron range of frequencies, with emphasis on application in tokamak plasmas. Propagation and absorption of these waves is generally well described by linear theory, a short overview of which is given. Electron cyclotron absorption is limited to regions of the plasma where the gyromotion of electrons is in resonance with the wave frequency and can be well localised, even in smaller experiments. Apart from being able to provide global heating and non-inductive current drive, ECRH and ECCD are therefore important tools to study and manipulate locally instabilities in the plasma which are electron temperature gradient or current driven. Important potential control applications in a reactor grade plasma include mode stabilisation to prevent disruptions, transport manipulation (e.g. to maintain burn) and correction of the bootstrap current profile. The use of EC waves in major tokamak experiments has in the past been restricted due to the lack of suitable sources. These sources are, however, now rapidly becoming available

  5. Electronic spectroscopies

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Schoonheydt, R.A.

    2000-01-01

    Diffuse reflectance spectroscopy (DRS) in the ultraviolet, visible and near-infrared region is a versatile spectroscopic technique, as both d-d and charge transfer transitions of supported TMI can be probed. One of the advantages of electronic spectroscopy is that the obtained information is

  6. Greening Electronics

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Søes Kokborg, Morten; Thomsen, Marianne

    Based on a literature review with focus on hazardous substances in waste electric and electronic equipment (WEEE) and numbers from a Danish treatment facility a flow analysis for specific substances has been conducted. Further, the accessible knowledge on human and environmental effects due to po...

  7. Electronic Government

    DEFF Research Database (Denmark)

    Wimmer, Maria A.; Traunmüller, Roland; Grönlund, Åke

    This book constitutes the refereed proceedings of the 4th International Conference on Electronic Government, EGOV 2005, held in Copenhagen, Denmark, in August 2005. The 30 revised papers presented were carefully reviewed and selected from numerous submissions, and assess the state-of-the-art in e...

  8. Electronic Commerce

    Indian Academy of Sciences (India)

    2000-11-30

    Nov 30, 2000 ... applications of internet are exchange of electronic mail, ex- change of files (text as well as multimedia), storing information in a form which allows other computers connected to the internet to access it and remote logging into a computer and using it to run programs. For two computers in different locations to.

  9. Electronic Commerce

    Indian Academy of Sciences (India)

    Electronic commerce usually uses a public switched telephone network (PSTN) and is often between entities which are not known to one another. Ensuring security of communication between the entities participating in e-commerce is hence an important requirement. Apart from ensuring the security of messages on the ...

  10. Nuclear electronics

    International Nuclear Information System (INIS)

    Friese, T.

    1981-09-01

    A short survey is given on nuclear radiation detectors and nuclear electronics. It is written for newcomers and those, who are not very familiar with this technique. Some additional information is given on typical failures in nuclear measurement systems. (orig.) [de

  11. Power electronics

    Indian Academy of Sciences (India)

    Kishore Chatterjee

    Power electronics plays an important role in the processing, conditioning and utilization of electric power. From ubiquitous ... An induction motor drive based on a modular multilevel converter (MMC) is presented ... dynamic voltage restorer and the control of an induction motor drive having an active front end converter.

  12. Electronic Money.

    Science.gov (United States)

    Schilling, Tim

    Thirty years ago a cashless society was predicted for the near future; paper currency and checks would be an antiquated symbol of the past. Consumers would embrace a new alternative for making payments: electronic money. But currency is still used for 87% of payments, mainly for "nickel and dime" purchases. And checks are the payment…

  13. Electronics department

    International Nuclear Information System (INIS)

    1979-01-01

    This report summarizes the activities in 1978 of some of the groups within the Electronics Department. The work covered includes plant protection and operator studies, reliability techniques, application of nuclear techniques to mineral exploration, applied laser physics, computing and, lastly, research instrumentation. (author)

  14. Electronic Commerce

    Indian Academy of Sciences (India)

    nance, Vol.6, No.2, 6-13, 2001. SERIES I ARTICLE. Electronic Commerce. 5. Cash Transactions. V Rajaraman. In this article we will discuss payment by cash for e-com- merce transactions and micro payments for services re- ceived via the internet. Introduction. In the previous part, we discussed payment by credit cards and.

  15. Cryogenic electronics

    Energy Technology Data Exchange (ETDEWEB)

    Fourches, N.; Abbon, P.; Delagnes, E.; Le Meur, L.P.

    1995-04-01

    This study presents the cryogenic electronics, which is used in high energy physics with appropriate device. It discuss their ability to hardening against ionization radiation and neutrons. Some partial results on the operation of microelectronics devices at cryogenic temperature are given. (TEC). 33 refs., 13 figs.

  16. Electronic Commerce

    Indian Academy of Sciences (India)

    2000-11-30

    Nov 30, 2000 ... Electronic Commerce. 2. E-Commerce System Architecture. V Rajaraman is with the. J awaharlal Nehru Centre for Advanced Scientific. Research and the Indian. Institute of Science,. Bangalore. Several generations of scientists and engineers in India have learnt computer science using his lucidly.

  17. Electronic Commerce

    Indian Academy of Sciences (India)

    In the first part of this series we stated that in business to business e-commerce, electronic documents are exchanged be- tween business partners by using either a private network or a public switched network. We also stated that in order to inter- pret them correctly we need a standard notation which is agreed to by both ...

  18. Electronic detectors for electron microscopy.

    Science.gov (United States)

    Faruqi, A R; McMullan, G

    2011-08-01

    Electron microscopy (EM) is an important tool for high-resolution structure determination in applications ranging from condensed matter to biology. Electronic detectors are now used in most applications in EM as they offer convenience and immediate feedback that is not possible with film or image plates. The earliest forms of electronic detector used routinely in transmission electron microscopy (TEM) were charge coupled devices (CCDs) and for many applications these remain perfectly adequate. There are however applications, such as the study of radiation-sensitive biological samples, where film is still used and improved detectors would be of great value. The emphasis in this review is therefore on detectors for use in such applications. Two of the most promising candidates for improved detection are: monolithic active pixel sensors (MAPS) and hybrid pixel detectors (of which Medipix2 was chosen for this study). From the studies described in this review, a back-thinned MAPS detector appears well suited to replace film in for the study of radiation-sensitive samples at 300 keV, while Medipix2 is suited to use at lower energies and especially in situations with very low count rates. The performance of a detector depends on the energy of electrons to be recorded, which in turn is dependent on the application it is being used for; results are described for a wide range of electron energies ranging from 40 to 300 keV. The basic properties of detectors are discussed in terms of their modulation transfer function (MTF) and detective quantum efficiency (DQE) as a function of spatial frequency.

  19. ELECTRONIC BANKING AND ELECTRONIC COMMERCE IN SERBIA

    Directory of Open Access Journals (Sweden)

    Ivana B. Petrevska

    2014-10-01

    Full Text Available Nowadays, we may witness to dramatic and visible changes in our life environment. Business ambient for companies is different every day, and it is very hard to predict a direction of future changes. There is an environment characterized by sharp competition and increasing number of competitors, fast technological improvements and highly sophisticated and informed costumers. Technological process influences the humanity strongly, changing the way that people live, work and spend. Electronic commerce and electronic banking has become incontinent, and makes a great part of today's total transactions. There are an increasing number of companies that perform their business that way and make profit. Social networks are proven to be the least expensive way of information exchange, and they are present in almost every part of the world. The globalization has reached the most distant parts of the Earth. Every resistance to new technologies is dangerous and may lead to bankruptcy. Due to the EU expansion, Internet users are to be expected, and prosperity of the e-commerce business models at the same time. In Serbia, electronic commerce is present, but not as developed as in EU countries. E-commerce, however it might be successful throughout the world, it is somewhat slow in its growth in Serbia. The reasons are numerous, and main obstacles are the lack of trust, still limited usage of banking cards, avoiding of e-payments by older population etc. Also, the recent scandals over the misuse of personal data, and e-crime are discouraging factors for the growth of e-trade and ebanking. The younger generations are ever more ready to use e-commerce, since they are open to new technologies and do not have the defensive attitude towards it. E-commerce and e-banking has growing potential even among older population, if the society prevents them from fear and mistrust.

  20. Molecular Electronics

    DEFF Research Database (Denmark)

    Jennum, Karsten Stein

    This thesis includes the synthesis and characterisation of organic compounds designed for molecular electronics. The synthesised organic molecules are mainly based on two motifs, the obigo(phenyleneethynylenes) (OPE)s and tetrathiafulvalene (TTF) as shown below. These two scaffolds (OPE and TTF......) are chemically merged together to form cruciform-like structures that are an essential part of the thesis. The cruciform molecules were subjected to molecular conductance measurements to explore their capability towards single-crystal field-effect transistors (Part 1), molecular wires, and single electron...... transistors (Part 2). The synthetic protocols rely on stepwise Sonogashira coupling reactions. Conductivity studies on various OPE-based molecular wires reveal that mere OPE compounds have a higher electrical resistance compared to the cruciform based wires (up to 9 times higher). The most spectacular result...

  1. Automotive electronics

    Energy Technology Data Exchange (ETDEWEB)

    Basshuysen, R. van [ed.; Baun, R. [comp.

    2000-10-01

    Electronic equipment is indispensable in modern motor cars for active and passive safety, exhaust and consumption monitoring or comfort. Electric and electronic systems today account for nearly 20 percent of the production cost of a normal passenger car, with an upward trend. Infotainment equipment is a growing market, which gets center stage in this issue. Further subjects discussed are current electronic and mechatronic applications as well as new developments in data transmission, development tools and constructional elements. [German] Ohne Elektronik sind moderne Automobile nicht mehr vorstellbar. Ob aktive oder passive Sicherheit, Abgas, Verbrauch oder Komfort - der Fortschritt im Autombil ist eng verknuepft mit der Einfuehrung neuer elektronischer Systeme und Komponenten. Obwohl meist nicht sehr auffaellig in einer Black-box verpackt, liegen die anteiligen Herstellungskosten fuer die Elektrik und Elektronik bei einem Mittelklassefahrzeug schon bei knapp 20 Prozent. Tendenz: Weiter steigend. Waehrend die Segnungen von ABS, ESP oder Motormanagement fuer den Kunden unsichtbar bleiben, tritt die Elektronik mit den Infotainment-Systemen ins Rampenlicht. Hochwertige Audio-Anlagen im Doppel-DIN-Format und grosse Farbbildschirme sitzen an prominenter Stelle im Armaturenbrett. Elektronische Systeme werden damit fuer den Kunden sichtbar, greifbar und erlebbar. Doch je mehr Funktionen integriert werden, desto wichtiger wird eine einfache Bedienung, die den Fahrer moeglichst wenig vom Verkehrsgeschehen ablenkt. Das ist leider keine Selbstverstaendlichkeit: Eine klare, einfache Bedienung wurde in der Vergangenheit schon bei so manchem simplen Cassetten-Radio schmerzlich vermisst. Infotainment im Automobil ist ein Wachstumsmarkt - und das Schwerpunkt-Thema der vorliegenden zweiten Ausgabe von 'Automotive Electronics'. Darueber hinaus beschaeftigt sich auch diese Ausgabe mit aktuellen Elektronik- und Mechatronik-Anwendungen und berichtet ueber neue Entwicklungen

  2. ELECTRON GUN

    Science.gov (United States)

    Christofilos, N.C.; Ehlers, K.W.

    1960-04-01

    A pulsed electron gun capable of delivering pulses at voltages of the order of 1 mv and currents of the order of 100 amperes is described. The principal novelty resides in a transformer construction which is disposed in the same vacuum housing as the electron source and accelerating electrode structure of the gun to supply the accelerating potential thereto. The transformer is provided by a plurality of magnetic cores disposed in circumferentially spaced relation and having a plurality of primary windings each inductively coupled to a different one of the cores, and a helical secondary winding which is disposed coaxially of the cores and passes therethrough in circumferential succession. Additional novelty resides in the disposition of the electron source cathode filament input leads interiorly of the transformer secondary winding which is hollow, as well as in the employment of a half-wave filament supply which is synchronously operated with the transformer supply such that the transformer is pulsed during the zero current portions of the half-wave cycle.

  3. Surface properties of metal-nitride and metal-carbide films deposited on Nb for RF superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Garwin, E.L.; King, F.K.; Kirby, R.E.; Aita, O.

    1983-09-01

    Various effects occur which can prevent attainment of the high Q's and/or the high gradient fields necessary for the operation of rf superconducting cavities. One of these effects, multipactor, both causes the cavity to detune during filling due to resonant secondary electron emission at the cavity walls, and lowers the Q by dissipative processes. TiN deposited onto the high field regions of room temperature Al cavities has been used at SLAC to successfully reduce multipactor in the past. We have therefore studied TiN and its companion materials, NbN, NbC, and TiC, all on Nb substrates under several realistic conditions: (1) as deposited, (2) exposed to air, and (3) 1 keV electron-bombarded. The studied films (up to 14 nm thickness) were sputter deposited onto sputter-cleaned Nb substrates. Results indicate that the materials tested gave substantially the same results. The maximum secondary electron yields for as-deposited films was about 1.0 to 1.2. These yields rose to greater than 1.5 upon air-exposure and were reduced to nearly the pre-oxidized values after electron bombardment (about 3 x 10/sup 17/ electrons-cm/sup -2/ in the case of NbN and NbC). XPS analysis showed that the oxides (e.g. TiO/sub 2/ in the case of TiN films) formed during air exposure were only slightly reduced (converted to lower oxides) by the electron beam exposure. AES showed a slight reduction in the surface O concentration following beam exposure. The results indicate that any of these films would be poor choices if simply deposited and exposed to air, but, in fact, the in-situ electron bombardment which occurs in cavities serves to reduce the effective secondary electron yield and thereby causes a substantial reduction in multipacting.

  4. Surface properties of metal-nitride and metal-carbide films deposited on Nb for RF superconductivity

    International Nuclear Information System (INIS)

    Garwin, E.L.; King, F.K.; Kirby, R.E.; Aita, O.

    1983-09-01

    Various effects occur which can prevent attainment of the high Q's and/or the high gradient fields necessary for the operation of rf superconducting cavities. One of these effects, multipactor, both causes the cavity to detune during filling due to resonant secondary electron emission at the cavity walls, and lowers the Q by dissipative processes. TiN deposited onto the high field regions of room temperature Al cavities has been used at SLAC to successfully reduce multipactor in the past. We have therefore studied TiN and its companion materials, NbN, NbC, and TiC, all on Nb substrates under several realistic conditions: (1) as deposited, (2) exposed to air, and (3) 1 keV electron-bombarded. The studied films (up to 14 nm thickness) were sputter deposited onto sputter-cleaned Nb substrates. Results indicate that the materials tested gave substantially the same results. The maximum secondary electron yields for as-deposited films was about 1.0 to 1.2. These yields rose to greater than 1.5 upon air-exposure and were reduced to nearly the pre-oxidized values after electron bombardment (about 3 x 10 17 electrons-cm -2 in the case of NbN and NbC). XPS analysis showed that the oxides (e.g. TiO 2 in the case of TiN films) formed during air exposure were only slightly reduced (converted to lower oxides) by the electron beam exposure. AES showed a slight reduction in the surface O concentration following beam exposure. The results indicate that any of these films would be poor choices if simply deposited and exposed to air, but, in fact, the in-situ electron bombardment which occurs in cavities serves to reduce the effective secondary electron yield and thereby causes a substantial reduction in multipacting

  5. Electronic manufacturing and packaging in Japan

    Science.gov (United States)

    Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

    1995-01-01

    This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

  6. Selenium for preventing cancer

    Directory of Open Access Journals (Sweden)

    Gabriele Dennert

    Full Text Available BACKGROUND: Selenium is a trace element essential to humans. Higher selenium exposure and selenium supplements have been suggested to protect against several types of cancers. OBJECTIVE: Two research questions were addressed in this review: What is the evidence for: 1. an aetiological relationship between selenium exposure and cancer risk in women and men?; 2. the efficacy of selenium supplementation for cancer prevention in women and men? SEARCH STRATEGY: We searched electronic databases and bibliographies of reviews and included publications. SELECTION CRITERIA: We included prospective observational studies to answer research question (a and randomised controlled trials (RCTs to answer research question (b. DATA COLLECTION AND ANALYSIS: We conducted random effects meta-analyses of epidemiological data when five or more studies were retrieved for a specific outcome. We made a narrative summary of data from RCTs. MAIN RESULTS: We included 49 prospective observational studies and six RCTs. In epidemiologic data, we found a reduced cancer incidence (summary odds ratio, OR, 0.69; 95% confidence interval, CI, 0.53 to 0.91 and mortality (OR 0.55, 95% CI 0.36 to 0.83 with higher selenium exposure. Cancer risk was more pronouncedly reduced in men (incidence: OR 0.66, 95% CI 0.42 to 1.05 than in women (incidence: OR 0.90, 95% CI 0.45 to 1.77. These findings have potential limitations due to study design, quality and heterogeneity of the data, which complicated the interpretation of the summary statistics. The RCTs found no protective efficacy of selenium yeast supplementation against non-melanoma skin cancer or L-selenomethionine supplementation against prostate cancer. Study results for the prevention of liver cancer with selenium supplements were inconsistent and studies had an unclear risk of bias. The results of the Nutritional Prevention of Cancer Trial (NPCT and SELECT raised concerns about possible harmful effects of selenium supplements. AUTHORS

  7. Detectors - Electronics

    International Nuclear Information System (INIS)

    Bregeault, J.; Gabriel, J.L.; Hierle, G.; Lebotlan, P.; Leconte, A.; Lelandais, J.; Mosrin, P.; Munsch, P.; Saur, H.; Tillier, J.

    1998-01-01

    The reports presents the main results obtained in the fields of radiation detectors and associated electronics. In the domain of X-ray gas detectors for the keV range efforts were undertaken to rise the detector efficiency. Multiple gap parallel plate chambers of different types as well as different types of X → e - converters were tested to improve the efficiency (values of 2.4% at 60 KeV were reached). In the field of scintillators a study of new crystals has been carried out (among which Lutetium orthosilicate). CdTe diode strips for obtaining X-ray imaging were studied. The complete study of a linear array of 8 CdTe pixels has been performed and certified. The results are encouraging and point to this method as a satisfying solution. Also, a large dimension programmable chamber was used to study the influence of temperature on the inorganic scintillators in an interval from -40 deg. C to +150 deg. C. Temperature effects on other detectors and electronic circuits were also investigated. In the report mentioned is also the work carried out for the realization of the DEMON neutron multidetector. For neutron halo experiments different large area Si detectors associated with solid and gas position detectors were realized. In the frame of a contract with COGEMA a systematic study of Li doped glasses was undertaken aiming at replacing with a neutron probe the 3 He counters presently utilized in pollution monitoring. An industrial prototype has been realised. Other studies were related to integrated analog chains, materials for Cherenkov detectors, scintillation probes for experiments on fundamental processes, gas position sensitive detectors, etc. In the field of associated electronics there are mentioned the works related to the multidetector INDRA, data acquisition, software gamma spectrometry, automatic gas pressure regulation in detectors, etc

  8. Electronic materials

    CERN Document Server

    Kwok, H L

    2010-01-01

    The electronic properties of solids have become of increasing importance in the age of information technology. The study of solids and materials, while having originated from the disciplines of physics and chemistry, has evolved independently over the past few decades. The classical treatment of solid-state physics, which emphasized classifications, theories and fundamental physical principles, is no longer able to bridge the gap between materials advances and applications. In particular, the more recent developments in device physics and technology have not necessarily been driven by new conc

  9. Nuclear electronics

    International Nuclear Information System (INIS)

    Lucero B, E.

    1989-01-01

    The rapid technical development of Colombia over the past years, resulted among others, a considerable increase in the number of measuring instrumentation and testing laboratories, scientific research and metrology centers, in industry, agriculture, public health, education on the nuclear field, etc. IAN is a well organized institution with qualified management, trained staff and reasonably equipped laboratories to carry out tasks as: Metrology, standardization, quality control and maintenance and repair of nuclear instruments. The government of Colombia has adopted a policy to establish and operate through the country maintenance and repair facilities for nuclear instrumentation. This policy is reflected in the organization of electronic laboratories in Bogota-IAN

  10. Basic electronics

    CERN Document Server

    Tayal, DC

    2010-01-01

    The second edition of this book incorporates the comments and suggestions of my friends and students who have critically studied the first edition. In this edition the changes and additions have been made and subject matter has been rearranged at some places. The purpose of this text is to provide a comprehensive and up-to-date study of the principles of operation of solid state devices, their basic circuits and application of these circuits to various electronic systems, so that it can serve as a standard text not only for universities and colleges but also for technical institutes. This book

  11. Pressure ulcer prevention and management.

    Science.gov (United States)

    Lyder, Courtney H

    2002-01-01

    This chapter reviews 218 published and unpublished research reports of pressure ulcer prevention and management by nurse researchers and researchers from other disciplines. The electronic databases MEDLINE (1966-July 2001), CINAHL (1982-June 2001), AMED (1985-July 2001), and EI Compedex Plus (1980-June 2001) were selected for the searches because of their focus on health and applied research. Moreover, evaluations of previous review articles and seminal studies that were published before 1966 are also included. Research conducted worldwide and published in English between 1930 and 2001 was included for review. Studies using descriptive, correlational, longitudinal, and randomized control trials were included. This review found that numerous gaps remain in our understanding of effective pressure ulcer prevention and management. Moreover, the majority of pressure ulcer care is derived from expert opinion rather than empirical evidence. Thus, additional research is needed to investigate pressure ulcer risk factors of ethnic minorities. Further studies are needed that examine the impact of specific preventive interventions (e.g., turning intervals based on risk stratification) and the cost-effectiveness of comprehensive prevention programs to prevent pressure ulcers. Finally, an evaluation is needed of various aspects of pressure ulcer management (e.g., use of support surfaces, use of adjunctive therapies) and healing of pressure ulcers.

  12. Stomach (Gastric) Cancer Prevention

    Science.gov (United States)

    ... likely as white men to die from stomach cancer. Stomach Cancer Prevention Key Points Avoiding risk factors and increasing ... factors and increasing protective factors may help prevent stomach cancer. Avoiding cancer risk factors may help prevent certain ...

  13. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    2013-01-01

    Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

  14. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    The global electrical energy consumption is still rising and there is an urgent demand to increase the power capacity. It is expected that the power capacity has to be doubled within 20 years. The production, distribution and use of energy should be as efficient as possible and incentives to save...... energy at the end-user should also be set up. Deregulation of energy has in the past lowered the investment in larger power plants, which means the need for new electrical power sources will be high in the near future. Two major technologies will play important roles to solve the future problems. One...... is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...

  15. Xylitol and caries prevention.

    Science.gov (United States)

    Duane, Brett

    2015-06-01

    Cochrane Oral Health Group Trials Register, the Cochrane Central Register of Controlled Trials (CENTRAL), Medline, Embase, CINAHL, Web of Science Conference Proceedings, Proquest Dissertations and Theses, US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the WHO Clinical Trials Registry Platform for ongoing trials. No language or year restrictions were used. Randomised controlled trials assessing the effects of xylitol products on dental caries in children and adults. Two review authors independently screened the results of the electronic searches, extracted data and assessed the risk of bias of the included studies. Authors were contacted where possible for missing data or clarification where feasible. For continuous outcomes, means and standard deviations were used to obtain the mean difference and 95% confidence interval (CI). Continuous data was used to calculate prevented fractions (PF) and 95% CIs to summarise the percentage reduction in caries. For dichotomous outcomes, reported risk ratios (RR) and 95% CIs were used. As there were fewer than four studies included in the meta-analysis, a fixed effect model was used. Ten studies were included with a total of 5903 participants. One study was assessed as being at low risk of bias, two were assessed as unclear risk of bias with seven at high risk of bias. Over 2.5–3 years, low quality evidence demonstrated that with 4216 children analysed, a fluoride toothpaste with 10% xylitol (exact dosage unsure) reduced caries by 13% when compared to a fluoride only toothpaste. (PF −0.13, 95% CI −0.18 to −0.08. Remaining evidence of the use of xylitol in children has risk of bias and uncertainty of effect and was therefore insufficient to determine a benefit from xylitol. Four studies reported that there were no adverse effects from any of the interventions. Two studies reported similar rates of adverse effects between study arms. The remaining studies either mentioned adverse effects

  16. Stimulated emission of photoexcited polarized electrons from GaAs

    International Nuclear Information System (INIS)

    Derbenev, Ya.S.; Melikyan, R.A.

    1986-01-01

    The influence of electric field on the emission of photoexcited polarized electrons is investigated. The thermalization of excited electrons is shown to be prevented at the field intensity in semiconductor of about 3 kV/cm. As a consequence the quantum yield grows up to unity. With the increase of the output energy of electrons the effective operation time of photocathode also increases

  17. "AN OUNCE OF PREVENTION..."

    Science.gov (United States)

    HASELKORN, FLORENCE

    PREVENTION AS FUNCTION, VALUE ISSUE, CONCEPTUAL SHORTCOMING, AND PRACTICE IS DISCUSSED AND RELATED TO EDUCATIONAL TASK. PREVENTION AS FUNCTION IS GENERATED BY OUR VALUE PREMISES. IN SEEKING TO PREVENT SOME FORMS OF SOCIAL DYSFUNCTION, WE MAY BE PERPETUATING OTHERS. THE CONCEPT OF PREVENTION IS AMBIGUOUS. CRUCIAL CONCEPTUAL ISSUES INCLUDE THE…

  18. Sustainable Management of Electronics

    Science.gov (United States)

    To provide information on EPAs strategy for electronics stewardship, certified electronics recyclers and the Challenge; as well as where to donate unwanted electronics, how to calculate benefits, and what's going on with electronics mgmt in their states.

  19. [Prevention of dementia].

    Science.gov (United States)

    Urakami, Katsuya

    2016-03-01

    The dementia prevention consists of three steps, primary prevention of dementia is to prevent from normal and mild cognitive impairment to dementia, secondary prevention is early detection and early treatment of dementia, and tertiary prevention is three stages of progress prevention of dementia. Primary prevention of dementia had been considered impossible until recently, but potential scientific evidence has been shown recently. The fact that 4.62 million people are person with dementia and 400 million people are person with mild cognitive impairment are considered to be urgent problem and we must intend to perform dementia prevention from primary to tertiary prevention thoroughly. We perform dementia screening using touch panel type computer and we recommend person with mild cognitive impairment to join dementia prevention classroom. Therefore, we can prevent progression from mild cognitive impairment to dementia (primary prevention). Early diagnosis and introduction to the specialized medical institution are needed if you find early stage of dementia and treat early (secondary prevention). To prevent progression by the appropriate drug treatment and care for dementia is required (tertiary prevention).

  20. EDITORIAL: Synaptic electronics Synaptic electronics

    Science.gov (United States)

    Demming, Anna; Gimzewski, James K.; Vuillaume, Dominique

    2013-09-01

    Conventional computers excel in logic and accurate scientific calculations but make hard work of open ended problems that human brains handle easily. Even von Neumann—the mathematician and polymath who first developed the programming architecture that forms the basis of today's computers—was already looking to the brain for future developments before his death in 1957 [1]. Neuromorphic computing uses approaches that better mimic the working of the human brain. Recent developments in nanotechnology are now providing structures with very accommodating properties for neuromorphic approaches. This special issue, with guest editors James K Gimzewski and Dominique Vuillaume, is devoted to research at the serendipitous interface between the two disciplines. 'Synaptic electronics', looks at artificial devices with connections that demonstrate behaviour similar to synapses in the nervous system allowing a new and more powerful approach to computing. Synapses and connecting neurons respond differently to incident signals depending on the history of signals previously experienced, ultimately leading to short term and long term memory behaviour. The basic characteristics of a synapse can be replicated with around ten simple transistors. However with the human brain having around 1011 neurons and 1015 synapses, artificial neurons and synapses from basic transistors are unlikely to accommodate the scalability required. The discovery of nanoscale elements that function as 'memristors' has provided a key tool for the implementation of synaptic connections [2]. Leon Chua first developed the concept of the 'The memristor—the missing circuit element' in 1971 [3]. In this special issue he presents a tutorial describing how memristor research has fed into our understanding of synaptic behaviour and how they can be applied in information processing [4]. He also describes, 'The new principle of local activity, which uncovers a minuscule life-enabling "Goldilocks zone", dubbed the

  1. Component reliability for electronic systems

    CERN Document Server

    Bajenescu, Titu-Marius I

    2010-01-01

    The main reason for the premature breakdown of today's electronic products (computers, cars, tools, appliances, etc.) is the failure of the components used to build these products. Today professionals are looking for effective ways to minimize the degradation of electronic components to help ensure longer-lasting, more technically sound products and systems. This practical book offers engineers specific guidance on how to design more reliable components and build more reliable electronic systems. Professionals learn how to optimize a virtual component prototype, accurately monitor product reliability during the entire production process, and add the burn-in and selection procedures that are the most appropriate for the intended applications. Moreover, the book helps system designers ensure that all components are correctly applied, margins are adequate, wear-out failure modes are prevented during the expected duration of life, and system interfaces cannot lead to failure.

  2. Pressurized waterproof case electronic device

    KAUST Repository

    Berumen, Michael L.

    2013-01-31

    A pressurized waterproof case for an electronic device is particularly adapted for fluid-tight containment and operation of a touch-screen electronic device or the like therein at some appreciable water depth. In one example, the case may be formed as an enclosure having an open top panel or face covered by a flexible, transparent membrane or the like for the operation of the touchscreen device within the case. A pressurizing system is provided for the case to pressurize the case and the electronic device therein to slightly greater than ambient in order to prevent the external water pressure from bearing against the transparent membrane and pressing it against the touch screen, thereby precluding operation of the touch screen device within the case. The pressurizing system may include a small gas cartridge or may be provided from an external source.

  3. Scanning transmission electron microscope

    NARCIS (Netherlands)

    Kruit, P.

    2006-01-01

    The invention relates to a scanning transmission electron microscope comprising an electron source, an electron accelerator and deflection means for directing electrons emitted by the electron source at an object to be examined, and in addition a detector for detecting electrons coming from the

  4. PREVENTION OF PHOSPHATE - INDUCED MITOCHONDRIAL SWELLING

    Science.gov (United States)

    Kroll, Arnold J.; Kuwabara, Toichiro

    1962-01-01

    The prevention of phosphate-induced mitochondrial swelling in the whole retina of the rabbit was studied with the electron microscope. It was found that a mixture of ATP, Mg++, and bovine serum albumin protected the mitochondria in vitro. This finding confirmed the results obtained spectrophotometrically with isolated rat liver mitochondria by Lehninger. PMID:13927020

  5. Carbon Nanotube Electron Gun

    Science.gov (United States)

    Nguyen, Cattien V. (Inventor); Ribaya, Bryan P. (Inventor)

    2013-01-01

    An electron gun, an electron source for an electron gun, an extractor for an electron gun, and a respective method for producing the electron gun, the electron source and the extractor are disclosed. Embodiments provide an electron source utilizing a carbon nanotube (CNT) bonded to a substrate for increased stability, reliability, and durability. An extractor with an aperture in a conductive material is used to extract electrons from the electron source, where the aperture may substantially align with the CNT of the electron source when the extractor and electron source are mated to form the electron gun. The electron source and extractor may have alignment features for aligning the electron source and the extractor, thereby bringing the aperture and CNT into substantial alignment when assembled. The alignment features may provide and maintain this alignment during operation to improve the field emission characteristics and overall system stability of the electron gun.

  6. Guidelines for the diagnosis, prevention and management of implantable cardiac electronic device infection. Report of a joint Working Party project on behalf of the British Society for Antimicrobial Chemotherapy (BSAC, host organization), British Heart Rhythm Society (BHRS), British Cardiovascular Society (BCS), British Heart Valve Society (BHVS) and British Society for Echocardiography (BSE).

    Science.gov (United States)

    Sandoe, Jonathan A T; Barlow, Gavin; Chambers, John B; Gammage, Michael; Guleri, Achyut; Howard, Philip; Olson, Ewan; Perry, John D; Prendergast, Bernard D; Spry, Michael J; Steeds, Richard P; Tayebjee, Muzahir H; Watkin, Richard

    2015-02-01

    Infections related to implantable cardiac electronic devices (ICEDs), including pacemakers, implantable cardiac defibrillators and cardiac resynchronization therapy devices, are increasing in incidence in the USA and are likely to increase in the UK, because more devices are being implanted. These devices have both intravascular and extravascular components and infection can involve the generator, device leads and native cardiac structures or various combinations. ICED infections can be life-threatening, particularly when associated with endocardial infection, and all-cause mortality of up to 35% has been reported. Like infective endocarditis, ICED infections can be difficult to diagnose and manage. This guideline aims to (i) improve the quality of care provided to patients with ICEDs, (ii) provide an educational resource for all relevant healthcare professionals, (iii) encourage a multidisciplinary approach to ICED infection management, (iv) promote a standardized approach to the diagnosis, management, surveillance and prevention of ICED infection through pragmatic evidence-rated recommendations, and (v) advise on future research projects/audit. The guideline is intended to assist in the clinical care of patients with suspected or confirmed ICED infection in the UK, to inform local infection prevention and treatment policies and guidelines and to be used in the development of educational and training material by the relevant professional societies. The questions covered by the guideline are presented at the beginning of each section. © The Author 2014. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  7. Development of 3000 m Subsea Blowout Preventer Experimental Prototype

    Science.gov (United States)

    Cai, Baoping; Liu, Yonghong; Huang, Zhiqian; Ma, Yunpeng; Zhao, Yubin

    2017-12-01

    A subsea blowout preventer experimental prototype is developed to meet the requirement of training operators, and the prototype consists of hydraulic control system, electronic control system and small-sized blowout preventer stack. Both the hydraulic control system and the electronic system are dual-mode redundant systems. Each system works independently and is switchable when there are any malfunctions. And it significantly improves the operation reliability of the equipment.

  8. Electron Beam Generation in Tevatron Electron Lenses

    International Nuclear Information System (INIS)

    Kamerdzhiev, V.; Kuznetsov, G.; Shiltsev, V.; Solyak, N.; Tiunov, M.

    2006-01-01

    New type of high perveance electron guns with convex cathode has been developed. Three guns described in this article are built to provide transverse electron current density distributions needed for Electron Lenses for beam-beam compensation in the Tevatron collider. The current distribution can be controlled either by the gun geometry or by voltage on a special control electrode located near cathode. We present the designs of the guns and report results of beam measurements on the test bench. Because of their high current density and low transverse temperature of electrons, electron guns of this type can be used in electron cooling and beam-beam compensation devices

  9. Electron beam generation in Tevatron electron lenses

    International Nuclear Information System (INIS)

    Kamerdzhiev, V.; Kuznetsov, G.; Shiltsev, V.; Solyak, N.; Tiunov, M.

    2006-01-01

    New type of high perveance electron guns with convex cathode has been developed. Three guns described in this article are built to provide transverse electron current density distributions needed for Electron Lenses for beam-beam compensation in the Tevatron collider. The current distribution can be controlled either by the gun geometry or by voltage on a special control electrode located near cathode. We present the designs of the guns and report results of beam measurements on the test bench. Because of their high current density and low transverse temperature of electrons, electron guns of this type can be used in electron cooling and beam-beam compensation devices

  10. Jet lag prevention

    Science.gov (United States)

    ... medlineplus.gov/ency/patientinstructions/000719.htm Jet lag prevention To use the sharing features on this page, ... Headache Irritability Stomach upset Sore muscles Tips for Prevention Before your trip: Get plenty of rest, eat ...

  11. Research Areas: Prevention

    Science.gov (United States)

    NCI’s prevention research has a broad focus, from identifying environmental and lifestyle factors that influence cancer risk to studying the biology of how cancer develops and studying ways to disseminate prevention interventions.

  12. Marine Pollution Prevention Act

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Marine Pollution Prevention Act of 2008 implements the International Convention for the Prevention of Pollution from Ships, including related Protocols (MARPOL)...

  13. Preventing Type 2 Diabetes

    Science.gov (United States)

    ... Sexual & Urologic Problems Clinical Trials Preventing Type 2 Diabetes Perhaps you have learned that you have a ... I lower my chances of developing type 2 diabetes? Research such as the Diabetes Prevention Program shows ...

  14. Preventing Diabetes Problems

    Science.gov (United States)

    ... Problems Diabetes & Sexual & Urologic Problems Clinical Trials Preventing Diabetes Problems View or Print All Sections Heart Disease & ... prevent or delay sexual and urologic problems. Depression & Diabetes Depression is common among people with a chronic, ...

  15. Statins and Cancer Prevention

    Science.gov (United States)

    ... cell membrane integrity, cell signaling, protein synthesis, and cell cycle progression, all of which are potential areas of intervention to arrest the cancer process. What are the ... at the NCI Division of Cancer Prevention Web site at http://prevention. ...

  16. Preventing food poisoning

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/007441.htm Preventing food poisoning To use the sharing features on this page, please enable JavaScript. To prevent food poisoning , take the following steps when preparing food: Carefully ...

  17. Breast Cancer Prevention

    Science.gov (United States)

    ... of Breast & Gynecologic Cancers Breast Cancer Screening Research Breast Cancer Prevention (PDQ®)–Patient Version What is prevention? Go ... from starting. Risk-reducing surgery . General Information About Breast Cancer Key Points Breast cancer is a disease in ...

  18. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Peer Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing ...

  19. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing Pressure Sores Mary Zeigler, MS Transition from Hospital to ...

  20. Traditional preventive treatment options

    DEFF Research Database (Denmark)

    Longbottom, C; Ekstrand, K; Zero, D

    2009-01-01

    Preventive treatment options can be divided into primary, secondary and tertiary prevention techniques, which can involve patient- or professionally applied methods. These include: oral hygiene (instruction), pit and fissure sealants ('temporary' or 'permanent'), fluoride applications (patient...... options....

  1. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... L Sarah Harrison, OT Anne Bryden, OT The Role of the Social Worker after Spinal Cord Injury ... do to prevent pressure sores? play_arrow What role does diet and hydration play in preventing pressure ...

  2. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... to prevent pressure sores? play_arrow What is “skin tolerance” and how can it be ... play_arrow What role does diet and hydration play in preventing pressure sores among ...

  3. National Suicide Prevention Lifeline

    Science.gov (United States)

    ... Our Crisis Centers Stories of Hope and Recovery Mental Health & Suicide Prevention Glossary Get Involved Participate Our Crisis Centers Social Media Hub Promote National Suicide Prevention Month Providers & Professionals ...

  4. Prevention of gravitational collapse

    International Nuclear Information System (INIS)

    Moffat, J.W.; Taylor, J.G.

    1981-01-01

    We apply a new theory of gravitation to the question of gravitational collapse to show that collapse is prevented in this theory under very reasonable conditions. This result also extends to prevent ultimate collapse of the Universe. (orig.)

  5. Accident prevention in radiotherapy.

    Science.gov (United States)

    Holmberg, O

    2007-04-01

    In order to prevent accidents in radiotherapy, it is important to learn from accidents that have occurred previously. Lessons learned from a number of accidents are summarised and underlying patterns are looked for in this paper. Accidents can be prevented by applying several safety layers of preventive actions. Categories of these preventive actions are discussed together with specific actions belonging to each category of safety layer.

  6. Accident prevention in radiotherapy

    OpenAIRE

    Holmberg, O

    2007-01-01

    In order to prevent accidents in radiotherapy, it is important to learn from accidents that have occurred previously. Lessons learned from a number of accidents are summarised and underlying patterns are looked for in this paper. Accidents can be prevented by applying several safety layers of preventive actions. Categories of these preventive actions are discussed together with specific actions belonging to each category of safety layer.

  7. Prevention of periodontal diseases.

    Science.gov (United States)

    Dentino, Andrew R; Kassab, Moawia M; Renner, Erica J

    2005-07-01

    The ultimate goal of periodontal disease prevention is to maintain the dentition over a lifetime in a state of health, comfort, and function in an aesthetically pleasing presentation. This article focuses on primary and secondary periodontal disease prevention as they relate to gingivitis and periodontitis. Risk assessment, mechanical plaque control, chemical plaque control, current clinical recommendations for optimal prevention, and future preventive strategies are discussed.

  8. Fall Prevention: Simple Tips to Prevent Falls

    Science.gov (United States)

    ... bars for the shower or tub A sturdy plastic seat for the shower or tub — plus a ... healthy-lifestyle/healthy-aging/in-depth/fall-prevention/art-20047358 . Mayo Clinic Footer Legal Conditions and Terms ...

  9. Chickenpox Prevention and Treatment

    Science.gov (United States)

    ... Multimedia Related Links Medline Plus Healthfinder.gov Shingles Prevention & Treatment Language: English Español (Spanish) Recommend on Facebook ... Prescribed by Your Doctor Español: Prevención y tratamiento Prevention The best way to prevent chickenpox is to ...

  10. Prevention IS Care

    Centers for Disease Control (CDC) Podcasts

    2009-03-26

    This podcast provides an overview of the Prevention IS Care campaign, which provides HIV prevention tools for medical care providers to use on a daily basis with patients who are living with HIV.  Created: 3/26/2009 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 3/26/2009.

  11. Strategies to prevent loneliness

    NARCIS (Netherlands)

    de Jong Gierveld, J.; Fokkema, T.; Sha'ked, A.; Rokach, A.

    2015-01-01

    Prevention is better than cure’. This also applies to loneliness experiences: preventing people from loneliness is better than helping them to reduce their feelings of loneliness through interventions. In this chapter, we argue the necessity of loneliness prevention strategies for handling future

  12. Prevention of Food Poisoning.

    Science.gov (United States)

    Army Quartermaster School, Ft. Lee, VA.

    The programed text provides a single lesson, four-hour, correspondence subcourse on the prevention of food poisoning. It covers the following areas: a definition of food poisoning; chemical food poisoning; biological food poisoning; causes and prevention of trichinosis; six factors controlling bacteria growth; bacterial infection; prevention of…

  13. Cancer risks and prevention

    International Nuclear Information System (INIS)

    Vessey, M.P.; Gray, M.

    1985-01-01

    A series of essays in honour of Sir Richard Doll is presented. Chapters cover the preventability of cancer, geography, smoking, diet, occupation, radiation, infections and immune impairment, exogenous and endogenous hormones, other drugs, prevention through legislation and by education and cancer risks and prevention in the Third World. The chapter on radiation has been indexed separately. (UK)

  14. Sunburn: Treatment and Prevention

    Science.gov (United States)

    ... 12 mos.) Toddler 1-3yrs. Preschool 3-5yrs Grade School 5-12yrs. Teen 12-18yrs. Young Adult 18-21yrs. Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations ...

  15. Mobile electrons in electron-attaching liquids

    International Nuclear Information System (INIS)

    Nyikos, L.

    1981-01-01

    Based on recent observations of mobile electrons in electron-attaching liquids some ideas are presented concerning the nature of the fas carrier. To explain the observed phenomena quantum chemical calculations and modified percolation theory are applied. (author)

  16. Electronics for LHC Experiments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This document gathers the abstracts of most presentations made at this workshop on electronics for the large hadron collider (LHC) experiments. The presentations were arranged into 6 sessions: 1) electronics for tracker, 2) trigger electronics, 3) detector control systems, 4) data acquisition, 5) electronics for calorimeters and electronics for muons, and 6) links, power systems, grounding and shielding, testing and quality assurance.

  17. Electronics for LHC Experiments

    International Nuclear Information System (INIS)

    2004-01-01

    This document gathers the abstracts of most presentations made at this workshop on electronics for the large hadron collider (LHC) experiments. The presentations were arranged into 6 sessions: 1) electronics for tracker, 2) trigger electronics, 3) detector control systems, 4) data acquisition, 5) electronics for calorimeters and electronics for muons, and 6) links, power systems, grounding and shielding, testing and quality assurance

  18. Nutrition Frontiers E-Newsletter | Division of Cancer Prevention

    Science.gov (United States)

    The Nutritional Science Research Group, Division of Cancer Prevention at NCI issues a quarterly electronic newsletter, Nutrition Frontiers, that highlights emerging evidence linking diet to cancer prevention and showcases recent findings about who will likely benefit most from dietary change. |

  19. Drug Prevention with Vulnerable Young People: A Review

    Science.gov (United States)

    Roe, Stephen; Becker, Jane

    2005-01-01

    The aim of this study was to carry out a comprehensive and systematic review of the literature on drug-use prevention with vulnerable young people. A search of electronic databases was conducted to find evaluations of prevention programmes targeted at high-risk young people and including illegal drug use as an outcome measure. Sixteen relevant…

  20. Electronic Design Automation Using Object Oriented Electronics

    OpenAIRE

    Walid M. Aly; Mohamed S. Abuelnasr

    2010-01-01

    Problem statement: Electronic design automation is the usage of computer technology and software tools for designing integrated electronic system and creating electrical schematics. Approach: An approach is presented for modeling of various electronic and electric devices using object oriented design, aiming on building a library of devices (classes) which can be used for electronic design automation. Results: The presented library was implemented using Java programming language to form an El...

  1. Pollution Prevention Program: Technology summary

    International Nuclear Information System (INIS)

    1994-02-01

    The Department of Energy (DOE) has established a national Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program for pollution prevention and waste minimization at its production plants During FY89/90 the Office of Environmental Restoration and Waste Management (EM), through the Office of Technology Development (OTD), established comprehensive, pollution prevention technical support programs to demonstrate new, environmentally-conscious technology for production processes. The RDDT ampersand E program now entails collaborative efforts across DOE. The Pollution Prevention Program is currently supporting three major activities: The DOE/US Air Force Memorandum of Understanding Program is a collaborative effort to utilize the combined resources of DOE and the Department of Defense, eliminate duplication of effort in developing technologies, and to facilitate technology solutions aimed at reducing waste through process modification, material substitution or recycling. The Waste Component Recycle, Treatment and Disposal Integrated Demonstration (WeDID) will develop recycle, treatment, and disposal processes and associated technologies for use in the dismantlement of non-nuclear weapons components, to support US arms treaties and policies. This program will focus on meeting all security and regulatory requirements (with additional benefit to the commercial electronics industry). The Environmentally Conscious Manufacturing Integrated Demonstration (ECMID) will effectively implement ECM technologies that address both the needs of the DOE Complex and US electronics industry, and encourage strong interaction between DOE and US industry. The ECMID will also develop life cycle analysis tools that will aid decisionmakers in selecting the optimum process based on the tradeoffs between cost an environmental impact

  2. [Prevention of eating disorders].

    Science.gov (United States)

    Papežová, Hana

    2017-01-01

    The quality of the prevention of eating disorders represents in several last decades frequently discussed issue in the context of rapidly changing socio-economic conditions, a significant increase of influence of the media, new technologies and knowledge of risk factors. Primary prevention aims to reduce the risk of developing eating disorders, but secondary and tertiary prevention play the important role as well. Effective and coordinated prevention is still missing. Our experience of international cooperation of the last 20 years led to the development and evaluation of prevention programs. We are describing their fast development and ongoing programs following the new trends recommended by WHO.

  3. Pressure Ulcer Prevention

    Science.gov (United States)

    2009-01-01

    23.4) 13.1–25.7 (3100) All health care settings 26 (25.2–26.8) 13.1–53.3 (7774) * CI indicates confidence interval. † Nonacute care included sub-acute care, chronic care, complex continuing care, long-term care, and nursing home care. ‡ Mixed health care includes a mixture of acute, nonacute, and/or community care health care delivery settings. Pressure ulcers have a considerable economic impact on health care systems. In Australia, the cost of treating a single stage IV ulcer has been estimated to be greater than $61,000 (AUD) (approximately $54,000 CDN), (3) while in the United Kingdom the total cost of pressure ulcers has been estimated at £1.4–£2.1 billion annually or 4% of the National Health Service expenditure. (4) Because of the high physical and economic burden of pressure ulcers, this review was undertaken to determine which interventions are effective at preventing the development of pressure ulcers in an at-risk population. Review Strategy The main objective of this systematic review is to determine the effectiveness of pressure ulcer preventive interventions including Risk Assessment, Distribution Devices, Nutritional Supplementation, Repositioning, and Incontinence Management. A comprehensive literature search was completed for each of the above 5 preventive interventions. The electronic databases searched included MEDLINE, MEDLINE In-Process and Other Non-Indexed Citations, EMBASE, the Cochrane Library, and the Cumulative Index to Nursing and Allied Health Literature. As well, the bibliographic references of selected studies were searched. All studies meeting explicit inclusion and exclusion criteria for each systematic review section were retained and the quality of the body of evidence was determined using the Grading of Recommendation Assessment, Development, and Evaluation (GRADE) system. (5) Where appropriate, a meta-analysis was undertaken to determine the overall estimate of effect of the preventive intervention under review

  4. Prevention Of Stroke

    Directory of Open Access Journals (Sweden)

    Nagaraja D

    2005-01-01

    Full Text Available Stroke is an important cause for neurological morbidity and mortality. Prevention of ischemic stroke involves identification and prevention of risk factors and optimal use of pharmacotherapy. Risk factors have been classified as modifiable and non-modifiable; control of modifiable factors should prevent stroke occurrence. Stroke prevention has been described at three levels: primary, secondary and tertiary. Prolonged hypertension increases an individual′s risk for developing fatal or nonfatal stroke by three times and its control has been shown to prevent stroke. Diabetes mellitus is an important cause for microangiopathy and predisposes to stroke. Statin trials have shown significant reduction in stroke in those who were treated with statins. Stroke risk can be reduced by avoiding tobacco use, control of obesity and avoiding sedentary life style. Anti platelet medications are effective for secondary prevention of stroke. Educating society regarding modifiable risk factors and optimal use of pharmacotherapy form the cornerstone for the prevention of stroke.

  5. Ageing and obsolescence of electronic components

    International Nuclear Information System (INIS)

    Garnero, E.; Daguzan, Ph.; Guillas, J.; Schweitz, G.

    1998-01-01

    Nowadays, every electronic equipment has to cope with two major problems. On the one hand, faster and faster obsolescence of electronic devices is a new trend which happens to prevent users from repairing their boards when parts are no more available. On the other hand, ageing of electronic components can lead to a massive amount of simultaneous failures on huge systems. This phenomenon is unfortunately emphasized when all systems date back to the same period of time. This paper aims at showing the mechanisms involved in these processes. It also describes the solutions found at EDF to face this situation. (authors)

  6. 77 FR 24667 - TANF Assistance and Electronic Benefit Transfer Transactions; Request for Public Comment

    Science.gov (United States)

    2012-04-25

    ... Electronic Benefit Transfer Transactions; Request for Public Comment AGENCY: Department of Health and Human... States have implemented policies and practices to prevent electronic benefit transfer transactions involving TANF assistance in liquor stores, casinos, gambling casinos, or other gaming establishments, and...

  7. Electron Microscopy Center (EMC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Electron Microscopy Center (EMC) at Argonne National Laboratory develops and maintains unique capabilities for electron beam characterization and applies those...

  8. Prevention of choking among children.

    Science.gov (United States)

    2010-03-01

    Choking is a leading cause of morbidity and mortality among children, especially those aged 3 years or younger. Food, coins, and toys are the primary causes of choking-related injury and death. Certain characteristics, including shape, size, and consistency, of certain toys and foods increase their potential to cause choking among children. Childhood choking hazards should be addressed through comprehensive and coordinated prevention activities. The US Consumer Product Safety Commission (CPSC) should increase efforts to ensure that toys that are sold in retail store bins, vending machines, or on the Internet have appropriate choking-hazard warnings; work with manufacturers to improve the effectiveness of recalls of products that pose a choking risk to children; and increase efforts to prevent the resale of these recalled products via online auction sites. Current gaps in choking-prevention standards for children's toys should be reevaluated and addressed, as appropriate, via revisions to the standards established under the Child Safety Protection Act, the Consumer Product Safety Improvement Act, or regulation by the CPSC. Prevention of food-related choking among children in the United States has been inadequately addressed at the federal level. The US Food and Drug Administration should establish a systematic, institutionalized process for examining and addressing the hazards of food-related choking. This process should include the establishment of the necessary surveillance, hazard evaluation, enforcement, and public education activities to prevent food-related choking among children. While maintaining its highly cooperative arrangements with the CPSC and the US Department of Agriculture, the Food and Drug Administration should have the authority to address choking-related risks of all food products, including meat products that fall under the jurisdiction of the US Department of Agriculture. The existing National Electronic Injury Surveillance System-All Injury

  9. Prevention of suicide

    Directory of Open Access Journals (Sweden)

    Rajiv Gupta

    2017-01-01

    Full Text Available Suicide is a major public health problem in India, probably even bigger than in the West. Suicidal behavior is the best conceptualized as a multifaceted complex problem involving social factors and mental illnesses. Broadly, there are two approaches to suicide prevention; population preventive strategies and high-risk preventive strategies. Population preventive strategies include reducing availability of means for suicide, education of primary care physicians, influencing media portrayal of suicidal behavior, education of the public, telephone helplines, and addressing economic issues associated with suicidal behavior. High-risk preventive strategy includes identifying individuals with high risk of committing suicide, intensively treating mental illness if present, and providing psychosocial support. Thus, prevention requires a multipronged effort with collaboration from various sectors including mental health professionals, social justice department, and macroeconomic policy makers.

  10. Traditional preventive treatment options

    DEFF Research Database (Denmark)

    Longbottom, C; Ekstrand, K; Zero, D

    2009-01-01

    conventional operative care, and since controlling the caries process prior to first restoration is the key to breaking the repair cycle and improving care for patients, future research should address the shortcomings in the current level of supporting evidence for the various traditional preventive treatment......Preventive treatment options can be divided into primary, secondary and tertiary prevention techniques, which can involve patient- or professionally applied methods. These include: oral hygiene (instruction), pit and fissure sealants ('temporary' or 'permanent'), fluoride applications (patient...

  11. Prevention of Prosthetic Dentistry

    Directory of Open Access Journals (Sweden)

    Eremin O.V.

    2011-03-01

    Full Text Available Prevention in prosthetic dentistry is not just a regular oral hygiene and the prevention of caries in the early stages of its development. The initial goal of orthopedic and dental should be the ability to convey to the patient's sense of pros-thetics that proteziruya one saved more. An example is included prosthetic dental arch defects with bridges or single artificial crowns on implants that will prevent movement of teeth and the continuity of the dentition

  12. Prevent Infections During Chemotherapy

    Centers for Disease Control (CDC) Podcasts

    2011-10-24

    This podcast discusses the importance of preventing infections in cancer patients who are undergoing chemotherapy. Dr. Lisa Richardson, CDC oncologist, talks about a new Web site for cancer patients and their caregivers.  Created: 10/24/2011 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP), Division of Cancer Prevention and Control (DCPC).   Date Released: 10/24/2011.

  13. Preventing food allergy

    DEFF Research Database (Denmark)

    de Silva, Debra; Panesar, Sukhmeet S; Thusu, Sundeep

    2013-01-01

    The European Academy of Allergy and Clinical Immunology is developing guidelines about how to prevent and manage food allergy. As part of the guidelines development process, a systematic review is planned to examine published research about the prevention of food allergy. This systematic review...... recommendations. The aim of this systematic review will be to assess the effectiveness of approaches for the primary prevention of food allergy....

  14. Speech disorder prevention

    Directory of Open Access Journals (Sweden)

    Miladis Fornaris-Méndez

    2017-04-01

    Full Text Available Language therapy has trafficked from a medical focus until a preventive focus. However, difficulties are evidenced in the development of this last task, because he is devoted bigger space to the correction of the disorders of the language. Because the speech disorders is the dysfunction with more frequently appearance, acquires special importance the preventive work that is developed to avoid its appearance. Speech education since early age of the childhood makes work easier for prevent the appearance of speech disorders in the children. The present work has as objective to offer different activities for the prevention of the speech disorders.

  15. Work hazard prevention plans

    International Nuclear Information System (INIS)

    Albertos Campos, F.

    2009-01-01

    The prevention of industrial risks is a constantly evolving discipline that has changed considerable in the last 25 years. The Cofrentes Nuclear Power Plants has always been operated with a clear policy favoring prevention by supporting the principle of its integration, i. e., that the hierarchical functional organization of the company make sure that industrial risk prevention is effective and that health and safety standards are met. The historical evolution of occupational safety in the Cofrentes Nuclear Power Plant shows a a clear trend towards improvement and is the results of many years of hard work and effort by the plants own and contractor personnel in the field of industrial risk prevention. (Author)

  16. Fungus Infections: Preventing Recurrence

    Science.gov (United States)

    ... Favorite Name: Category: Share: Yes No, Keep Private Fungus Infections: Preventing Recurrence Share | Doctors have excellent treatments for skin fungus infections that occur on the feet, nails, groin, ...

  17. Prevention at Community Colleges. Prevention Update

    Science.gov (United States)

    Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

    2012-01-01

    According to "Community College Student Alcohol Use: Developing Context-Specific Evidence and Prevention Approaches," community colleges have traditionally had a threefold mission that includes preparing students for transfer to four-year colleges, developmental education, and workforce preparation. The researchers point out that the demographic…

  18. Selenium for preventing cancer

    Science.gov (United States)

    Vinceti, Marco; Dennert, Gabriele; Crespi, Catherine M; Zwahlen, Marcel; Brinkman, Maree; Zeegers, Maurice PA; Horneber, Markus; D'Amico, Roberto; Del Giovane, Cinzia

    2015-01-01

    Background This review is an update of the first Cochrane publication on selenium for preventing cancer (Dennert 2011). Selenium is a metalloid with both nutritional and toxicological properties. Higher selenium exposure and selenium supplements have been suggested to protect against several types of cancers. Objectives Two research questions were addressed in this review: What is the evidence for: an aetiological relation between selenium exposure and cancer risk in humans? andthe efficacy of selenium supplementation for cancer prevention in humans? Search methods We conducted electronic searches of the Cochrane Central Register of Controlled Trials (CENTRAL, 2013, Issue 1), MEDLINE (Ovid, 1966 to February 2013 week 1), EMBASE (1980 to 2013 week 6), CancerLit (February 2004) and CCMed (February 2011). As MEDLINE now includes the journals indexed in CancerLit, no further searches were conducted in this database after 2004. Selection criteria We included prospective observational studies (cohort studies including sub-cohort controlled studies and nested case-control studies) and randomised controlled trials (RCTs) with healthy adult participants (18 years of age and older). Data collection and analysis For observational studies, we conducted random effects meta-analyses when five or more studies were retrieved for a specific outcome. For RCTs, we performed random effects meta-analyses when two or more studies were available. The risk of bias in observational studies was assessed using forms adapted from the Newcastle-Ottawa Quality Assessment Scale for cohort and case-control studies; the criteria specified in the Cochrane Handbook for Systematic Reviews of Interventions were used to evaluate the risk of bias in RCTs. Main results We included 55 prospective observational studies (including more than 1,100,000 participants) and eight RCTs (with a total of 44,743 participants). For the observational studies, we found lower cancer incidence (summary odds ratio (OR) 0

  19. Introduction to Electronics course

    CERN Multimedia

    CERN. Geneva HR-RFA

    2006-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  20. Introduction to electronics

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  1. Seeing with Electrons

    Indian Academy of Sciences (India)

    Seeing with Electrons. A K Raychaudhuri. In this article we briefly review the application of electrons in the field of microscopy. Two types of microscopes are discussed, the electron microscope and the tunneling microscope. It is emphasized that in both the applications the electron behaves as a quantum mechanical object.

  2. Introduction to Electronic Marketing.

    Science.gov (United States)

    Dilbeck, Lettie

    These materials for a five-unit course were developed to introduce secondary and postsecondary students to the use of electronic equipment in marketing. The units cover the following topics: electronic marketing as a valid marketing approach; telemarketing; radio electronic media marketing; television electronic media marketing; and cable TV…

  3. In Situ Transmission Electron Microscopy for Electronics

    OpenAIRE

    Arita, Masashi; Hamada, Kouichi; Takahashi, Yasuo; Sueoka, Kazuhisa; Shibayama, Tamaki

    2015-01-01

    Electronic devices are strongly influenced by their microstructures. In situ transmission electron microscopy (in situ TEM) with capability to measure electrical properties is an effective method to dynamically correlate electric properties with microstructures. We have developed tools and in situ TEM experimental procedures for measuring electronic devices, including TEM sample holders and sample preparation methods. The method was used to study metallic nanowire by electromigration, magn...

  4. Electronics engineer's reference book

    CERN Document Server

    Mazda, F F

    1989-01-01

    Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

  5. Electron transfer reactions

    CERN Document Server

    Cannon, R D

    2013-01-01

    Electron Transfer Reactions deals with the mechanisms of electron transfer reactions between metal ions in solution, as well as the electron exchange between atoms or molecules in either the gaseous or solid state. The book is divided into three parts. Part 1 covers the electron transfer between atoms and molecules in the gas state. Part 2 tackles the reaction paths of oxidation states and binuclear intermediates, as well as the mechanisms of electron transfer. Part 3 discusses the theories and models of the electron transfer process; theories and experiments involving bridged electron transfe

  6. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  7. Electronics engineer's reference book

    CERN Document Server

    Turner, L W

    1976-01-01

    Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

  8. Preventing Eye Injuries

    Science.gov (United States)

    ... Stories Español Eye Health / Eye Health A-Z Eye Injuries Sections Preventing Eye Injuries Recognizing and Treating ... Infographic Five Steps to Safer Champagne Celebrations Preventing Eye Injuries Leer en Español: Lesiones de los ojos ...

  9. Injury prevention in football

    African Journals Online (AJOL)

    and cool downs before and after training and matches, respectively. As part of injury prevention, adequate injury management and rehabilitation are essential; especially in the prevention of re-injury. Unfortunately, youth football is often disadvantaged with inadequate or unavailable sports medicine personnel and treatment ...

  10. HIV Risk and Prevention

    Science.gov (United States)

    ... Prevention VIH En Español Get Tested Find an HIV testing site near you. Enter ZIP code or city Follow HIV/AIDS CDC HIV CDC HIV/AIDS See RSS | ... Email Updates on HIV Syndicated Content Website Feedback HIV Risk and Prevention Recommend on Facebook Tweet Share ...

  11. Preventative Medicine today

    Directory of Open Access Journals (Sweden)

    José Antonio Maluf de Carvalho

    2005-03-01

    Full Text Available The great majority of chronic diseases can be prevented byreducing risks, understood as factors that increase the probabilityof a specific disease or condition, such as hypertension,hypercholesterolemia, inadequate diet, smoking habit, obesity andsedentarism. These aspects are evaluated in this article as wellas prevention and screening methods.

  12. [Prevention of psychosocial risks].

    Science.gov (United States)

    Dalle, Édouard; Trichard-Salembier, Alexandra; Sobaszek, Annie

    2018-02-01

    The theme of psychosocial risks remains in the workplace. It is therefore essential that all members of a company are made aware of the terminology and specific prevention actions in this field. Distinguishing between the manifestations of these risks and their causes and consequences helps to improve prevention. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  13. Prevention de la Poliomyelite

    Directory of Open Access Journals (Sweden)

    M. Baltazard

    1962-01-01

    Full Text Available In Iran, the prevention of poliomyelitis is practically limited to vaccinatton This paper, however, gives a detailed account of the preventive measures attempting to check the spread of the infection and of those aiming at the reduction of the frequency of the paralytic manifestation

  14. Cancer Prevention Overview (PDQ)

    Science.gov (United States)

    ... have been shown to reduce the risk of breast cancer in women at high risk. SERMS may cause side effects , such as hot flashes , so they are not often used for prevention of cancer. See the PDQ summary on Breast Cancer Prevention for more information. Finasteride has been ...

  15. Prevent Cervical Cancer!

    Centers for Disease Control (CDC) Podcasts

    2015-01-08

    Cervical cancer can be prevented. Listen as two friends—one a doctor—talk about screening tests and early detection. Learn what test you might need.  Created: 1/8/2015 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 1/8/2015.

  16. Prevention of Preeclampsia

    Directory of Open Access Journals (Sweden)

    Sammya Bezerra Maia e Holanda Moura

    2012-01-01

    Full Text Available Preeclampsia (PE affects around 2–5% of pregnant women. It is a major cause of maternal and perinatal morbidity and mortality. In an attempt to prevent preeclampsia, many strategies based on antenatal care, change in lifestyle, nutritional supplementation, and drugs have been studied. The aim of this paper is to review recent evidence about primary and secondary prevention of preeclampsia.

  17. Prevention of Preeclampsia

    OpenAIRE

    Bezerra Maia e Holanda Moura, Sammya; Marques Lopes, Laudelino; Murthi, Padma; da Silva Costa, Fabricio

    2012-01-01

    Preeclampsia (PE) affects around 2–5% of pregnant women. It is a major cause of maternal and perinatal morbidity and mortality. In an attempt to prevent preeclampsia, many strategies based on antenatal care, change in lifestyle, nutritional supplementation, and drugs have been studied. The aim of this paper is to review recent evidence about primary and secondary prevention of preeclampsia.

  18. Can I Prevent Acne?

    Science.gov (United States)

    ... for Educators Search English Español Can I Prevent Acne? KidsHealth / For Teens / Can I Prevent Acne? Print en español ¿Puedo prevenir el acné? What Causes Acne? Contrary to what you may have heard, acne ...

  19. Recent work on superconducting QWRs at the Weizmann Institute (invited)

    International Nuclear Information System (INIS)

    Ben-Zvi, I.; Sokolowski, J.S.

    1986-01-01

    Recent work on superconducting quarter-wave resonators (QWR) at the Weizmann Institute of Science is reported. Two subjects are discussed: the performance of these resonators as particle acceleration devices in the booster module recently installed at the accelerator laboratory and new aspects of the electron multipactoring phenomenon in these resonators

  20. Preventing and responding to medical identity theft.

    Science.gov (United States)

    Amori, Geraldine

    2008-01-01

    Medical identity theft is a crime with two victims: patients and providers. It is easy to commit and lucrative because healthcare record keeping and business interactions are complex and mainly electronic. Patients whose identity has been stolen are vulnerable to both medical error and financial loss. Providers may suffer both reputation loss and financial loss. There are steps to help prevent and to respond appropriately to medical identity theft.

  1. Prevention of preterm birth.

    LENUS (Irish Health Repository)

    Flood, Karen

    2012-02-01

    Preterm birth (delivery before 37 completed weeks of gestation) is common and rates are increasing. In the past, medical efforts focused on ameliorating the consequences of prematurity rather than preventing its occurrence. This approach resulted in improved neonatal outcomes, but it remains costly in terms of both the suffering of infants and their families and the economic burden on society. Increased understanding of the pathophysiology of preterm labor has altered the approach to this problem, with increased focus on preventive strategies. Primary prevention is a limited strategy which involves public education, smoking cessation, improved nutritional status and avoidance of late preterm births. Secondary prevention focuses on recurrent preterm birth which is the most recognisable risk factor. Widely accepted strategies include cervical cerclage, progesterone and dedicated clinics. However, more research is needed to explore the role of antibiotics and anti-inflammatory treatments in the prevention of this complex problem.

  2. Preventing eating disorders.

    Science.gov (United States)

    Shaw, Heather; Stice, Eric; Becker, Carolyn Black

    2009-01-01

    This article reviews eating disorder (ED) prevention programs, highlighting features that define successful programs and particularly promising interventions, and how they might be further refined. The field of ED prevention has advanced considerably both theoretically and methodologically compared with the earlier ED prevention programs, which were largely psychoeducational and met with limited success. Recent meta-analytic findings show that more than half (51%) of ED prevention interventions reduced ED risk factors and more than a quarter (29%) reduced current or future eating pathology (EP). A couple of brief programs have been shown to reduce the risk for future onset of EP and obesity. Selected interactive, multisession programs offered to participants older than 15 years, delivered by professional interventionists and including body acceptance or dissonance-induction content, produced larger effects. Understanding and applying these results can help inform the design of more effective prevention programs in the future.

  3. 31 CFR 240.3 - Electronic checks and substitute checks.

    Science.gov (United States)

    2010-07-01

    ... using an electronic check, but this part does not create any right for the presenting bank to return the.... Any financial institution that creates a substitute check or electronic check shall prevent... destroyed, in a manner consistent with federal banking agency guidelines for safeguarding customer...

  4. Does regular repositioning prevent pressure ulcers?

    Science.gov (United States)

    Krapfl, Lee Ann; Gray, Mikel

    2008-01-01

    Prolonged exposure to pressure is the primary etiologic factor of a pressure ulcer (PU) and effective preventive interventions must avoid or minimize this exposure. Therefore, frequent repositioning of the patient has long been recommended as a means of preventing PU. To review the evidence on the efficacy of repositioning as a PU prevention intervention. A systematic review of electronic databases MEDLINE and CINAHL, from January 1960 to July 2008, was undertaken. Studies were limited to prospective randomized clinical trials or quasi-experimental studies that compared repositioning to any other preventive interventions or any study that compared various techniques of repositioning such as turning frequency. Only those studies that measured the primary outcome of interest, PU incidence, were included in our review. Limited evidence suggests that repositioning every 4 hours, when combined with an appropriate pressure redistribution surface, is just as effective for the prevention of facility- acquired PUs as a more frequent (every 2 hour) regimen. There is insufficient evidence to determine whether a 30 degrees lateral position is superior to a 90 degrees lateral position or a semi-Fowler's position. The current regulatory and legal environment has focused increased attention on PU prevention. Pressure redistribution methods and the frequency of application are among the first factors scrutinized when a PU develops. Our clinical experience validates that regular movement of the immobilized patient is important, but evidence defining the optimal frequency of repositioning or optimal positioning is lacking.

  5. Electron-electron interactions in disordered systems

    CERN Document Server

    Efros, AL

    1985-01-01

    ``Electron-Electron Interactions in Disordered Systems'' deals with the interplay of disorder and the Coulomb interaction. Prominent experts give state-of-the-art reviews of the theoretical and experimental work in this field and make it clear that the interplay of the two effects is essential, especially in low-dimensional systems.

  6. Energy electron analyzers raster electron microscope

    International Nuclear Information System (INIS)

    Dremova, N.N.; Raj, Eh.I.; Robinson, V.N.

    1995-01-01

    Spectrometers of back-scattered and secondary electrons used in a raster electron microscope designed to study multilayer structures and potential relief at the solid-state body surface, are described. Their possible applications are demonstrated using microelectronics devices as an example

  7. Single electron-ics with carbon nanotubes

    NARCIS (Netherlands)

    Götz, G.T.J.

    2010-01-01

    We experimentally investigate Quantum Dots, formed in Carbon Nanotubes. The first part of this thesis deals with charge sensing on such quantum dots. The charge sensor is a metallic Single-electron-transistor, sensitive to the charge of a single electron on the quantum dot. We use this technique for

  8. VIRTUAL ELECTRONIC COMPONENTS OF THE ELECTRONIC EQUIPMENT

    Directory of Open Access Journals (Sweden)

    E. Lazarevich

    2013-01-01

    Full Text Available The article is present new idea of the creation, developments and improvements of the electronic equipment of complex systems by means of the virtual electronic components. The idea of the virtual electronic components is a presentation and perception of the creation and developments of the equipment on two forming: real – in the manner of standard marketed block of the intellectual property and image – in the manner of virtual component. The real component in most cases slows the development of the electronic equipment. The imaginary component is the «locomotive» of development of the electronic equipment. The Imaginary component contains the scientific has brushed against developer. The scientific has brushed against developer reveals of itself in the manner of virtual component on the modern level of the design rates of microelectronics.

  9. Electronics for dummies

    CERN Document Server

    Shamieh

    2015-01-01

    Explore the basic concepts of electronics, build your electronics workbench, and begin creating fun electronics projects right away! Electronics For Dummies, 3rd Edition is your guide to the world of electronics. Spanning circuitry, wiring, robotics, transmitters, amplifiers, and more, this book demystifies electricity basics and beyond. The third edition offers new content revised to reflect the latest advancements in the electronics field, and it offers full color project examples to spark your creativity and inspire you to put your new skills to use! Packed with projects that can be comple

  10. RHIC electron lenses upgrades

    Energy Technology Data Exchange (ETDEWEB)

    Gu, X. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Altinbas, Z. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Bruno, D. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Binello, S. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Costanzo, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Drees, A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Fischer, W. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Gassner, D. M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Hock, J. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Hock, K. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Harvey, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Luo, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Marusic, A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Mi, C. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Mernick, K. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Minty, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Michnoff, R. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Miller, T. A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Pikin, A. I. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Robert-Demolaize, G. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Samms, T. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Shrey, T. C. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Schoefer, V. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Tan, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Than, R. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Thieberger, P. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; White, S. M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2015-05-03

    In the Relativistic Heavy Ion Collider (RHIC) 100 GeV polarized proton run in 2015, two electron lenses were used to partially compensate for the head-on beam-beam effect for the first time. Here, we describe the design of the current electron lens, detailing the hardware modifications made after the 2014 commissioning run with heavy ions. A new electron gun with 15-mm diameter cathode is characterized. The electron beam transverse profile was measured using a YAG screen and fitted with a Gaussian distribution. During operation, the overlap of the electron and proton beams was achieved using the electron backscattering detector in conjunction with an automated orbit control program.

  11. Prevention in practice

    DEFF Research Database (Denmark)

    Birch, Stephen; Bridgman, Colette; Brocklehurst, Paul

    2015-01-01

    for the conference, collected materials from scribes during the conference and additional resources collated in advance of the meeting, authors agreed on the summary document. RESULTS: The Prevention in Practice conference aimed to collate information about which diseases could be prevented in practice, how diseases...... could be identified early enough to facilitate prevention, what evidence based therapies and treatments were available and how, given the collective evidence, could these be introduced in general dental practice within different reimbursement models. CONCLUSIONS: While examples of best practice were...

  12. CSI cardiac prevent 2015

    Directory of Open Access Journals (Sweden)

    S Ramakrishnan

    2015-01-01

    Full Text Available The CSI Cardiac Prevent 2015 was held at Hotel Taj Palace, New Delhi, on September 25-27, 2015. The major challenge was to create interest among cardiologists and physicians on preventive cardiology, a neglected area. The theme of the conference was "Innovations in Heart Disease Prevention.′′ This conference included "CSI at WHF Roadmap Workshop, Inauguration Ceremony, scientific program, plenary sessions, Nursing/Dietician track, Industry Exhibition, Social Events," Great India blood pressure Survey, and CSI Smart Heart App. A total of 848 delegates/faculties attended this conference against a total of 1140 people registered for the meeting.

  13. Obesity Prevention and Screening.

    Science.gov (United States)

    Mackey, Eleanor R; Olson, Alexandra; DiFazio, Marc; Cassidy, Omni

    2016-03-01

    Obesity is widespread, associated with several physical and psychosocial comorbidities, and is difficult to treat. Prevention of obesity across the lifespan is critical to improving the health of individuals and society. Screening and prevention efforts in primary care are an important step in addressing the obesity epidemic. Each period of human development is associated with unique risks, challenges, and opportunities for prevention and intervention. Screening tools for overweight/obesity, although imperfect, are quick and easy to administer. Screening should be conducted at every primary care visit and tracked longitudinally. Screening tools and cutoffs for overweight and obesity vary by age group. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. Prevention of Eye Injuries

    OpenAIRE

    Pashby, Tom

    1981-01-01

    In Canada 30,000 people are registered as blind; in one third of these, blindness might have been avoided. Prevention is the key to reducing the number of eye injuries and blind eyes. The role of the family physician in early identification of treatable conditions and in the education of patients is discussed, but responsibility for prevention belongs to all physicians. The success of prevention is seen in the great reduction in eye injuries in industry and sports since eye protectors have be...

  15. Measuring pollution prevention

    International Nuclear Information System (INIS)

    Stephan, D.G.; Bridges, J.S.

    1992-01-01

    To assess progress in pollution prevention, estimates or measurements of the amounts of pollution actually prevented have to be made. Such estimates or measurements tell us how far we have come and, possibly, how much farther there is to go in utilizing pollution prevention as a tool for improving environmental quality. They can, theoretically, be used to assess progress on a scale ranging from the individual facility or even the individual process or activity generation wastes to scale as large as a geographical area such as a county, a state or even the United States as a whole. 3 refs

  16. Novel preventive treatment options

    DEFF Research Database (Denmark)

    Longbottom, C; Ekstrand, K; Zero, D

    2009-01-01

    A number of novel preventive treatment options which, as with traditional methods, can be differentiated into 3 categories of prevention (primary, secondary and tertiary), have been and are being currently investigated. Those reviewed are either commercially available or appear relatively close...... of these techniques show considerable promise and dentists should be aware of these developments and follow their progress, the evidence for each of these novel preventive treatment options is currently insufficient to make widespread recommendations. Changes in dental practice should be explored to see how oral...

  17. Selenium for preventing cancer.

    Science.gov (United States)

    Vinceti, Marco; Filippini, Tommaso; Del Giovane, Cinzia; Dennert, Gabriele; Zwahlen, Marcel; Brinkman, Maree; Zeegers, Maurice Pa; Horneber, Markus; D'Amico, Roberto; Crespi, Catherine M

    2018-01-29

    This review is the third update of the Cochrane review "Selenium for preventing cancer". Selenium is a naturally occurring element with both nutritional and toxicological properties. Higher selenium exposure and selenium supplements have been suggested to protect against several types of cancer. To gather and present evidence needed to address two research questions:1. What is the aetiological relationship between selenium exposure and cancer risk in humans?2. Describe the efficacy of selenium supplementation for cancer prevention in humans. We updated electronic searches of the Cochrane Central Register of Controlled Trials (CENTRAL; 2017, Issue 2), MEDLINE (Ovid, 2013 to January 2017, week 4), and Embase (2013 to 2017, week 6), as well as searches of clinical trial registries. We included randomised controlled trials (RCTs) and longitudinal observational studies that enrolled adult participants. We performed random-effects (RE) meta-analyses when two or more RCTs were available for a specific outcome. We conducted RE meta-analyses when five or more observational studies were available for a specific outcome. We assessed risk of bias in RCTs and in observational studies using Cochrane's risk assessment tool and the Newcastle-Ottawa Scale, respectively. We considered in the primary analysis data pooled from RCTs with low risk of bias. We assessed the certainty of evidence by using the GRADE approach. We included 83 studies in this updated review: two additional RCTs (10 in total) and a few additional trial reports for previously included studies. RCTs involved 27,232 participants allocated to either selenium supplements or placebo. For analyses of RCTs with low risk of bias, the summary risk ratio (RR) for any cancer incidence was 1.01 (95% confidence interval (CI) 0.93 to 1.10; 3 studies, 19,475 participants; high-certainty evidence). The RR for estimated cancer mortality was 1.02 (95% CI 0.80 to 1.30; 1 study, 17,444 participants). For the most frequently

  18. Electronic Commerce "in the dark"

    Science.gov (United States)

    Buzzi, Maria Claudia; Buzzi, Marina; Leporini, Barbara; Senette, Caterina

    The widespread diffusion of electronic commerce offers a great opportunity for blind people. We describe the results of an electronic survey carried out with 22 blind and 22 sighted users in order to understand the difficulties and obstacles they experience shopping on-line, and solicit their expectations and suggestions for making the interaction simpler and more satisfying. Results show that blind users shop on-line much less than their sighted counterparts, since they encounter more difficulties not only when making a purchase, but even in the navigation phase preceding the commercial transaction. Complex layouts and unstructured content can prevent an e-transaction from being successfully completed. Furthermore, security, privacy and trustiness, common concerns for all consumers, also impact on the fear of buying via Internet for the visually impaired. Poor usability leads to a potential loss of revenue for on-line companies and a lost opportunity to increase a blind person's independence. Providing simpler, more understandable UIs would benefit all users and fuel the expansion of electronic commerce.

  19. Electron scattering from pyrimidine

    International Nuclear Information System (INIS)

    Colmenares, Rafael; Fuss, Martina C; García, Gustavo; Oller, Juan C; Muñoz, Antonio; Blanco, Francisco; Almeida, Diogo; Limão-Vieira, Paulo

    2014-01-01

    Electron scattering from pyrimidine (C 4 H 4 N 2 ) was investigated over a wide range of energies. Following different experimental and theoretical approaches, total, elastic and ionization cross sections as well as electron energy loss distributions were obtained.

  20. ELSA electron stretcher devices

    International Nuclear Information System (INIS)

    1979-10-01

    The use of an electron stretcher ring at the Bonn electron synchrotron is discussed. The construction of the proposed ring is described, and the costs are estimated. Possible experiments using this ring are discussed. (HSI)

  1. Chapter 9: Electronics

    International Nuclear Information System (INIS)

    Grupen, Claus; Shwartz, Boris A.

    2006-01-01

    Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

  2. Electron Paramagnetic Resonance Spectroscopy

    Indian Academy of Sciences (India)

    IAS Admin

    ARTICLE. Electron Paramagnetic Resonance Spectroscopy. Biological Applications. B G Hegde. Recently, electron paramagnetic resonance (EPR) spectros- copy has emerged as a powerful tool to study the structure and dynamics of biological macromolecules such as proteins, protein aggregates ... research interests are.

  3. Electronic Health Records

    Science.gov (United States)

    ... Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for Educators Search English Español Electronic Health Records KidsHealth / For Teens / Electronic Health Records ...

  4. Electron microscopy for Engineers

    International Nuclear Information System (INIS)

    Jones, I P

    2009-01-01

    This paper reviews the application of (mainly) Transmission Electron Microscopy (TEM) in an engineering context. The first two sections are TEM and chemical in nature; the final three sections are more general and include aspects of Scanning Electron Microscopy (SEM).

  5. Certified Electronics Recyclers

    Science.gov (United States)

    Learn how EPA encourages all electronics recyclers become certified by demonstrating to an accredited, independent third-party auditor and that they meet specific standards to safely recycle and manage electronics.

  6. Laboratory Handbook Electronics

    CERN Multimedia

    1966-01-01

    Laboratory manual 1966 format A3 with the list of equipment cables, electronic tubes, chassis, diodes transistors etc. One of CERN's first material catalogue for construction components for mechanical and electronic chassis.

  7. Electronic Science Seminar

    Directory of Open Access Journals (Sweden)

    Geidarov P.Sh.

    2015-09-01

    Full Text Available The structure of electronic scientific seminar, which provides a high level of quality of the objectivity in the evaluation of scientific papers, including dissertations, is described. Conditions for the implementation of electronic scientific seminar are also considered.

  8. Paleoclassical electron heat transport

    International Nuclear Information System (INIS)

    Callen, J.D.

    2005-01-01

    Radial electron heat transport in low collisionality, magnetically-confined toroidal plasmas is shown to result from paleoclassical Coulomb collision processes (parallel electron heat conduction and magnetic field diffusion). In such plasmas the electron temperature equilibrates along magnetic field lines a long length L, which is the minimum of the electron collision length and a maximum effective half length of helical field lines. Thus, the diffusing field lines induce a radial electron heat diffusivity M ≅ L/(πR 0q ) ∼ 10 >> 1 times the magnetic field diffusivity η/μ 0 ≅ ν e (c/ω p ) 2 . The paleoclassical electron heat flux model provides interpretations for many features of 'anomalous' electron heat transport: magnitude and radial profile of electron heat diffusivity (in tokamaks, STs, and RFPs), Alcator scaling in high density plasmas, transport barriers around low order rational surfaces and near a separatrix, and a natural heat pinch (or minimum temperature gradient) heat flux form. (author)

  9. Electronic Submission of Labels

    Science.gov (United States)

    Pesticide registrants can provide draft and final labels to EPA electronically for our review as part of the pesticide registration process. The electronic submission of labels by registrants is voluntary but strongly encouraged.

  10. Joint Services Electronics Program.

    Science.gov (United States)

    1983-09-30

    Compound Semiconductors." 4 ......... I-*. Univesity of California. Berkeley Electronics Research Laboratory Joint Services Electronics Program August 15...reduction techniques [SCH-66,MCG- 73,HAM-75], for essentially i educing the proportionality constant. A significant portion of the probabilistic literature

  11. Can Vaginitis Be Prevented?

    Science.gov (United States)

    ... examples of safe sex. 1 Centers for Disease Control and Prevention. (2010). Self-study STD module—vaginitis . ... Halvorson New Chief of Gynecologic Health and Disease Branch Division of Epidemiology, Statistics, ...

  12. Dental Sealants Prevent Cavities

    Science.gov (United States)

    ... FAQs CDC SEALS Software CDC State Strategies: Preventing Tooth Decay CDC Oral Health Data Other Sites MedlinePlus – Child Dental Health MedlinePlus – Tooth Decay American Dental Association – Evidence-based clinical practice guideline ...

  13. Prevent Back Pain

    Science.gov (United States)

    ... and prevent back pain: Do back-strengthening and stretching exercises at least 2 or 3 times a week. ... risk of back pain. Do back-strengthening and stretching exercises [PDF - 244 KB] at least 2 or 3 ...

  14. Preventing Knee Injuries

    Science.gov (United States)

    ... Blog Skip breadcrumb navigation Preventing Knee Injuries Knee injuries in children and adolescent athletes may be the result of ... occur in childhood sports, but with any knee injury in a growing child there is a possibility of a fracture related ...

  15. Home Improvements Prevent Falls

    Science.gov (United States)

    ... turn JavaScript on. Feature: Falls and Older Adults Home Improvements Prevent Falls Past Issues / Winter 2014 Table ... and ensure your safety. "Safe-ty-fy" Your Home Some Questions for Your Provider Will my medicines ...

  16. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... increased? play_arrow What do family members and caregivers need to know about pressure sores? play_arrow What do family members and caregivers need to do to prevent pressure sores? play_ ...

  17. Prostate Cancer Prevention

    Science.gov (United States)

    ... prostate cancer A man whose father, brother, or son has had prostate cancer has a higher-than- ... known if these drugs lower the risk of death from prostate cancer. The Prostate Cancer Prevention Trial ( ...

  18. Prevention of cisplatin nephrotoxicity

    Directory of Open Access Journals (Sweden)

    Hayati Fatemeh

    2016-01-01

    Full Text Available Cisplatin has a well-established role in the treatment of broad spectrum of malignancies; however its use is limited because of cisplatin-induced nephrotoxicity (CIN which can be progressive in more than 50% of cases. The most important risk factors for CIN include higher doses of cisplatin, previous cisplatin chemotherapy, underlying kidney damage and concurrent treatment with other potential nephrotoxin agents, such as aminoglycosides, nonsteroidal anti-inflammatory agents, or iodinated contrast media. Different strategies have been offered to diminish or prevent nephrotoxicity of cisplatin. The standard approach for prevention of CIN is the administration of lower doses of cisplatin in combination with full intravenous hydration prior and after cisplatin administration. Cisplatin-induced oxidative stress in the kidney may be prevented by natural antioxidant compounds. The results of this review show that many strategies for prevention of CIN exist, however, attention to the administration of these agent for CIN is necessary.

  19. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries ... LLC Understanding Spinal Cord Injury About Us Expert Videos Contact Us Personal Experience Videos Blog Videos By ...

  20. Preventing Financial Crime

    DEFF Research Database (Denmark)

    Boll, Karen

    This paper investigates the Swedish tax authority’s (Skatteverkets) compliance initiative called Preventing Financial Crime. In Sweden tax evasion related to organised moon-lighting is defined as a major risk to the revenue collection and to the legitimacy of Skatteverket. The traditional approach...... to abating such tax evasion has been reformed and a new mix-method approach adopted. This approach combines a proactive strategy—Preventing Financial Crime—with a reactive inspection strategy. During one a month of intensive fieldwork in Sweden, I studied the daily work in Preventing Financial Crime. Based...... on this, the paper shows that the Swedish tax officials seek to motivate large construction contractors and municipalities to take preventive measures in relation to their sub-contractors to avoid and abate tax evasion. The paper shows the challenges in engaging and involving these external stakeholders...

  1. Oral Cancer Prevention

    Science.gov (United States)

    ... Cancer Diagnosis Prevention Screening & Early Detection Treatment Cancer & Public Health Cancer Health Disparities Childhood Cancer Clinical Trials Global Health Key Initiatives Cancer Moonshot Genomic Data Commons National Clinical Trials ...

  2. Esophageal Cancer Prevention

    Science.gov (United States)

    ... Cancer Diagnosis Prevention Screening & Early Detection Treatment Cancer & Public Health Cancer Health Disparities Childhood Cancer Clinical Trials Global Health Key Initiatives Cancer Moonshot Genomic Data Commons National Clinical Trials ...

  3. Child Maltreatment Prevention

    Science.gov (United States)

    ... Study Prevent Shaken Baby Syndrome Suggested Practices for Journalists Reporting on Child Abuse and Neglect [PDF 2. ... input class="button submit" name="commit" type="submit" value="Submit" /> Related Links Saving Lives & Protecting People ...

  4. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores ... sores? What is a Spinal Cord Injury? SCI Medical Experts People Living With SCI Personal Experiences By ...

  5. Prevent Child Abuse America

    Science.gov (United States)

    ... call the police . Crisis and support contacts For Child Abuse Reporting Numbers in your State please visit: Child ... suspected child abuse and neglect. Parent Resources Prevent Child Abuse America (800) CHILDREN A resource for tips, referrals, ...

  6. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Adult Injuries Spinal Cord Injury 101 David Chen, MD Preventing Pressure Sores Mary Zeigler, MS Transition from ... Rosenberg, PsyD Understanding SCI Rehabilitation Donald Peck Leslie, MD Adjusting to Social Life in a Wheelchair Lisa ...

  7. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... hours? play_arrow What's the best way to do daily skin inspections? play_arrow What are the ... for someone with a spinal cord injury to do to prevent pressure sores? play_arrow Why is ...

  8. Wildfire Prevention Strategies.

    Science.gov (United States)

    National Wildlife Coordinating Group, Boise, ID.

    This document provides information and guidance on wildfire prevention strategies. Chapters include: (1) "Introduction"; (2) "How to Use this Guide"; (3) "Fire Cause Classification"; (4) "Relative Effectiveness"; (5) "Degree of Difficulty"; (6) "Intervention Techniques"; (7)…

  9. Preventing Deep Vein Thrombosis

    Science.gov (United States)

    ... you may wear special elastic stockings or inflatable boots. These devices squeeze the muscles to help keep ... Special stockings that compress the legs below the knee may help prevent blood clots from forming. However, ...

  10. Preventing High Blood Pressure

    Science.gov (United States)

    ... Heart Disease Cholesterol Salt Million Hearts® WISEWOMAN Preventing High Blood Pressure: Healthy Living Habits Recommend on Facebook Tweet Share ... meal and snack options can help you avoid high blood pressure and its complications. Be sure to eat plenty ...

  11. Disaster prevention surveillance system

    International Nuclear Information System (INIS)

    Nara, Satoru; Kamiya, Eisei

    2001-01-01

    Fuji Electric Co., Ltd. has supplied many management systems to nuclear reactor institution. 'The nuclear countermeasures-against-calamities special-measures' was enforced. A nuclear entrepreneur has devised the measure about expansion prevention and restoration of a calamity while it endeavors after prevention of generating of a nuclear calamity. Our company have supplied the 'disaster prevention surveillance system' to the Japan Atomic Energy Research Institute Tokai Research Establishment aiming at strengthening of the monitoring function at the time (after the accident) of the accident used as one of the above-mentioned measures. A 'disaster prevention surveillance system' can share the information on the accident spot in an on-site command place, an activity headquarters, and support organizations, when the serious accident happens. This system is composed of various sensors (temperature, pressure and radiation), cameras, computers and network. (author)

  12. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... Living with SCI Personal Experiences by Topic Resources Peer Counseling Blog About Media Donate Spinal Cord Injury Medical Expert Videos Topics menu Topics Preventing Pressure Sores Adult Injuries Spinal Cord Injury 101 David ...

  13. Handbook on electronic commerce

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M. [Illinois Univ., Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology; Blanning, R. [Vanderbilt Univ., Nashville, TN (United States). Owen Graduate School of Management; Strader, T. [Iowa State Univ., Ames, IA (United States). Management Information Systems; Whinston, A. [eds.] [Texas Univ., Austin, TX (United States). Dept. of Management Science and Information Systems

    2000-07-01

    The world is undergoing a revolution to a digital economy, with pronounced implications for corporate strategy, marketing, operations, information systems, customer services, global supply-chain management, and product distribution. This handbook examines the aspects of electronic commerce, including electronic storefront, on-line business, consumer interface, business-to-business networking, digital payment, legal issues, information product development, and electronic business models. Indispensable for academics, students and professionals who are interested in Electronic Commerce and Internet Business. (orig.)

  14. Electronics and computer acronyms

    CERN Document Server

    Brown, Phil

    1988-01-01

    Electronics and Computer Acronyms presents a list of almost 2,500 acronyms related to electronics and computers. The material for this book is drawn from a number of subject areas, including electrical, electronics, computers, telecommunications, fiber optics, microcomputers/microprocessors, audio, video, and information technology. The acronyms also encompass avionics, military, data processing, instrumentation, units, measurement, standards, services, organizations, associations, and companies. This dictionary offers a comprehensive and broad view of electronics and all that is associated wi

  15. Extreme environment electronics

    CERN Document Server

    Cressler, John D

    2012-01-01

    Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world's foremost exp

  16. Electron-attachment processes

    International Nuclear Information System (INIS)

    Christophorou, L.G.; McCorkle, D.L.; Christodoulides, A.A.

    1982-01-01

    Topics covered include: (1) modes of production of negative ions, (2) techniques for the study of electron attachment processes, (3) dissociative electron attachment to ground-state molecules, (4) dissociative electron attachment to hot molecules (effects of temperature on dissociative electron attachment), (5) molecular parent negative ions, and (6) negative ions formed by ion-pair processes and by collisions of molecules with ground state and Rydberg atoms

  17. Prevention of malignant neoplasms

    OpenAIRE

    D. G. Zaridze; D. M. Maksimovich

    2017-01-01

    Research in causation of cancer is an important part of cancer research in general and is an essential prerequisite for cancer prevention. The effective primary prevention is not visible without evidence based knowledge in the causation of cancer in humans.There is sufficient evidence that certain life style and environment factors cause cancer in humans. These factors include: smoking and other types of tobacco consumption, overweight and obesity, lack of physical activity, diet rich in proc...

  18. HPV Prevention series

    OpenAIRE

    de Sanjosé Silvia

    2012-01-01

    Abstract Human Papilloma Virus (HPV) is a major leading cause of Human Cancer. Through the HPV Prevention series we would like to highlight the quality and the breadth of the research being carried out on the Control and Prevention of HPV and HPV related disease. This series aims to bring together a diverse range of HPV related specialties featuring research that has as ultimate goal insights into HPV related disease reduction. Articles within a wide range of topics such as natural history st...

  19. Prevention of hepatocellular carcinoma.

    Science.gov (United States)

    Kew, Michael C

    2010-01-01

    Because of its frequency and grave prognosis, preventing hepatocellular carcinoma is an urgent priority. Prevention should be possible because environmental carcinogens-chronic hepatitis B and C virus infections, dietary exposure to aflatoxins, and iron overload-cause the great majority of these tumors. Chronic hepatitis B virus infection accounts for 55% of global hepatocellular carcinomas and 80% of those in the high-incidence Asia Pacific and sub-Saharan African regions. In these regions the infection that becomes chronic is predominantly acquired very early in life. A safe and effective vaccine against this virus is available and its universal inclusion in the immunization of infants has already resulted in a marked reduction of chronic infection and a 70% decrease in the occurrence of hepatocellular carcinoma in those immunized. Chronic hepatitis C virus infection is the major cause of hepatocellular carcinoma in industrialized countries. The infection is mainly acquired in adulthood and, until a vaccine becomes available, prevention will consist mainly of identifying, counselling, and treating chronically infected individuals, preventing spread of the virus by the use of safe injection practices (particularly in intravenous drug abusers), and screening all donated blood for the presence of the virus. 4.5 billion of the world.s population are exposed to dietary aflatoxins. Prevention involves treating susceptible crops to prevent fungal contamination, and handling the foodstuffs in such a way as to prevent contamination during storage. Iron overload in hereditary hemochromatosis can be prevented by repeated venesection and in African dietary iron overload by fermenting the home-brewed beer in iron-free containers.

  20. Preventive Migraine Treatment

    Science.gov (United States)

    Silberstein, Stephen D.

    2015-01-01

    Purpose of Review: This article reviews the evidence base for the preventive treatment of migraine. Recent Findings: Evidence-based guidelines for the preventive treatment of migraine have recently been published by the American Academy of Neurology (AAN) and the Canadian Headache Society (CHS), providing valuable guidance for clinicians. Strong evidence exists to support the use of metoprolol, timolol, propranolol, divalproex sodium, sodium valproate, and topiramate for migraine prevention, according to the AAN. Based on best available evidence, adverse event profile, and expert consensus, topiramate, propranolol, nadolol, metoprolol, amitriptyline, gabapentin, candesartan, Petasites (butterbur), riboflavin, coenzyme Q10, and magnesium citrate received a strong recommendation for use from the CHS. Summary: Migraine preventive drug treatments are underutilized in clinical practice. Principles of preventive treatment are important to improve compliance, minimize side effects, and improve patient outcomes. Choice of preventive treatment of migraine should be based on the presence of comorbid and coexistent illness, patient preference, reproductive potential and planning, and best available evidence. PMID:26252585

  1. Electron Cyclotron Resonances in Electron Cloud Dynamics

    International Nuclear Information System (INIS)

    Celata, Christine; Celata, C.M.; Furman, Miguel A.; Vay, J.-L.; Yu, Jennifer W.

    2008-01-01

    We report a previously unknown resonance for electron cloud dynamics. The 2D simulation code 'POSINST' was used to study the electron cloud buildup at different z positions in the International Linear Collider positron damping ring wiggler. An electron equilibrium density enhancement of up to a factor of 3 was found at magnetic field values for which the bunch frequency is an integral multiple of the electron cyclotron frequency. At low magnetic fields the effects of the resonance are prominent, but when B exceeds ∼(2 pi mec/(elb)), with lb = bunch length, effects of the resonance disappear. Thus short bunches and low B fields are required for observing the effect. The reason for the B field dependence, an explanation of the dynamics, and the results of the 2D simulations and of a single-particle tracking code used to elucidate details of the dynamics are discussed

  2. Arduino electronics blueprints

    CERN Document Server

    Wilcher, Don

    2015-01-01

    This book is intended for those who want to learn about electronics and coding by building amazing devices and gadgets with Arduino. If you are an experienced developer who understands the basics of electronics, then you can quickly learn how to build smart devices using Arduino. The only experience needed is a desire to learn about electronics, circuit breadboarding, and coding.

  3. Electron Induction Linacs

    Science.gov (United States)

    Caporaso, George J.; Chen, Yu-Jiuan

    Electron induction linacs have been used for over four decades for a variety of applications. As discussed in Chap. 8, these include basic studies in magnetically confined fusion, transport of intense electron beams in various gases, the generation of electromagnetic radiation from free electron lasers, radiation processing of materials and food, and flash X-ray radiography sources.

  4. Electronic recordkeeping: An introduction

    Energy Technology Data Exchange (ETDEWEB)

    Deken, J.M.

    2000-01-19

    This paper begins with a brief overview of records and archival management before the advent of the electronic era; then describe the ways in which the definitions and constructs of archives and records management have been altered in the electronic environment; and outlines the various approaches to the challenges of electronic recordkeeping that are currently being investigated and applied.

  5. Syringe-injectable electronics.

    Science.gov (United States)

    Liu, Jia; Fu, Tian-Ming; Cheng, Zengguang; Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M

    2015-07-01

    Seamless and minimally invasive three-dimensional interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating the syringe injection (and subsequent unfolding) of sub-micrometre-thick, centimetre-scale macroporous mesh electronics through needles with a diameter as small as 100 μm. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with >90% device yield. We demonstrate several applications of syringe-injectable electronics as a general approach for interpenetrating flexible electronics with three-dimensional structures, including (1) monitoring internal mechanical strains in polymer cavities, (2) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (3) in vivo multiplexed neural recording. Moreover, syringe injection enables the delivery of flexible electronics through a rigid shell, the delivery of large-volume flexible electronics that can fill internal cavities, and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics.

  6. Syringe injectable electronics

    Science.gov (United States)

    Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M.

    2015-01-01

    Seamless and minimally-invasive three-dimensional (3D) interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating syringe injection and subsequent unfolding of submicrometer-thick, centimeter-scale macroporous mesh electronics through needles with a diameter as small as 100 micrometers. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with > 90% device yield. We demonstrate several applications of syringe injectable electronics as a general approach for interpenetrating flexible electronics with 3D structures, including (i) monitoring of internal mechanical strains in polymer cavities, (ii) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (iii) in vivo multiplexed neural recording. Moreover, syringe injection enables delivery of flexible electronics through a rigid shell, delivery of large volume flexible electronics that can fill internal cavities and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics. PMID:26053995

  7. EFFECTIVE ELECTRONIC TUTORIAL

    Directory of Open Access Journals (Sweden)

    Andrei A. Fedoseev

    2014-01-01

    Full Text Available The article analyzes effective electronic tutorials creation and application based on the theory of pedagogy. Herewith the issues of necessary electronic tutorial functional, ways of the educational process organization with the use of information and communication technologies and the logistics of electronic educational resources are touched upon. 

  8. ELECTRONS IN NONPOLAR LIQUIDS.

    Energy Technology Data Exchange (ETDEWEB)

    HOLROYD,R.A.

    2002-10-22

    Excess electrons can be introduced into liquids by absorption of high energy radiation, by photoionization, or by photoinjection from metal surfaces. The electron's chemical and physical properties can then be measured, but this requires that the electrons remain free. That is, the liquid must be sufficiently free of electron attaching impurities for these studies. The drift mobility as well as other transport properties of the electron are discussed here as well as electron reactions, free-ion yields and energy levels, Ionization processes typically produce electrons with excess kinetic energy. In liquids during thermalization, where this excess energy is lost to bath molecules, the electrons travel some distance from their geminate positive ions. In general the electrons at this point are still within the coulombic field of their geminate ions and a large fraction of the electrons recombine. However, some electrons escape recombination and the yield that escapes to become free electrons and ions is termed G{sub fi}. Reported values of G{sub fi} for molecular liquids range from 0.05 to 1.1 per 100 eV of energy absorbed. The reasons for this 20-fold range of yields are discussed here.

  9. White Paper on Multicarrier Excitation of Multipactor Breakdown: A Survey of Current Methods and Research Opportunities

    Science.gov (United States)

    2015-06-18

    Corporation Eric Holzman – Northrop Grumman Kurt Ketola – Raytheon Space and Airborne Systems Rolf Kich – Flight Microwave Corporation Rami Kishek...mda.mil Brig Gen Anthony Cotton NRO cottonan@nro.mil Douglas Dawson NASA - JPL douglas.e.dawson@jpl.nasa.g ov Ryan Bentley Ball rbentley@ball.com Rami

  10. Ultrafast Electron Dynamics in Solar Energy Conversion.

    Science.gov (United States)

    Ponseca, Carlito S; Chábera, Pavel; Uhlig, Jens; Persson, Petter; Sundström, Villy

    2017-08-23

    Electrons are the workhorses of solar energy conversion. Conversion of the energy of light to electricity in photovoltaics, or to energy-rich molecules (solar fuel) through photocatalytic processes, invariably starts with photoinduced generation of energy-rich electrons. The harvesting of these electrons in practical devices rests on a series of electron transfer processes whose dynamics and efficiencies determine the function of materials and devices. To capture the energy of a photogenerated electron-hole pair in a solar cell material, charges of opposite sign have to be separated against electrostatic attractions, prevented from recombining and being transported through the active material to electrodes where they can be extracted. In photocatalytic solar fuel production, these electron processes are coupled to chemical reactions leading to storage of the energy of light in chemical bonds. With the focus on the ultrafast time scale, we here discuss the light-induced electron processes underlying the function of several molecular and hybrid materials currently under development for solar energy applications in dye or quantum dot-sensitized solar cells, polymer-fullerene polymer solar cells, organometal halide perovskite solar cells, and finally some photocatalytic systems.

  11. Soldering in electronics assembly

    CERN Document Server

    Judd, Mike

    2013-01-01

    Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

  12. Opportunity Knocks: HIV Prevention in Primary Care.

    Science.gov (United States)

    Thrun, Mark W

    2014-06-01

    Expansions in health care coverage, a comprehensive framework for HIV prevention and care, electronic medical records, and novel HIV prevention modalities create a current opportunity to change the trajectory of the HIV epidemic in the United States. HIV is increasingly disproportionately found in populations historically at higher risk, including gay men and other men who have sex with men, transgender women, injection drug users, and persons of color. This underscores the need for providers to identify persons at higher risk for HIV and assure the provision of screening and prevention services. In turn, universal screening for HIV-testing every adolescent and adult at least once in their lifetime-will increasingly be necessary to find the infrequent cases of HIV in lower risk populations. In both these domains, primary care providers will play a unique role in complementing traditional providers of HIV prevention and care services by increasing the proportion of their patients who have been screened for HIV, opening dialogues around sexual health, including asking about sexual orientation and gender identity, and prescribing antivirals as pre- and postexposure prophylaxis for their non-HIV-infected patients. Primary care providers must understand and embrace their importance along the HIV prevention and care continuum.

  13. Stroke prevention: an update.

    Science.gov (United States)

    Bousser, Marie-Germaine

    2012-03-01

    Stroke is a personal, familial, and social disaster. It is the third cause of death worldwide, the first cause of acquired disability, the second cause of dementia, and its cost is astronomic. The burden of stroke is likely to increase given the aging of the population and the growing incidence of many vascular risk factors. Prevention of stroke includes--as for all other diseases--a "mass approach" aiming at decreasing the risk at the society level and an individual approach, aiming at reducing the risk in a given subject. The mass approach is primarily based on the identification and treatment of vascular risk factors and, if possible, in the implementation of protective factors. These measures are the basis of primary prevention but most of them have now been shown to be also effective in secondary prevention. The individual approach combines a vascular risk factor modification and various treatments addressing the specific subtypes of stroke, such as antiplatelet drugs for the prevention of cerebral infarction in large and small artery diseases of the brain, carotid endarterectomy or stenting for tight carotid artery stenosis, and oral anticoagulants for the prevention of cardiac emboli. There is a growing awareness of the huge evidence-to-practice gap that exists in stroke prevention largely due to socio-economic factors. Recent approaches include low cost intervention packages to reduce blood pressure and cheap "polypills" combining in a single tablet aspirin and several drugs to lower blood pressure and cholesterol. Polypill intake should however not lead to abandon the healthy life-style measures which remain the mainstay of stroke prevention.

  14. High brightness electron accelerator

    International Nuclear Information System (INIS)

    Sheffield, R.L.; Carlsten, B.E.; Young, L.M.

    1994-01-01

    A compact high brightness linear accelerator is provided for use, e.g., in a free electron laser. The accelerator has a first plurality of accelerating cavities having end walls with four coupling slots for accelerating electrons to high velocities in the absence of quadrupole fields. A second plurality of cavities receives the high velocity electrons for further acceleration, where each of the second cavities has end walls with two coupling slots for acceleration in the absence of dipole fields. The accelerator also includes a first cavity with an extended length to provide for phase matching the electron beam along the accelerating cavities. A solenoid is provided about the photocathode that emits the electrons, where the solenoid is configured to provide a substantially uniform magnetic field over the photocathode surface to minimize emittance of the electrons as the electrons enter the first cavity. 5 figs

  15. Electron reconstruction in CMS

    CERN Document Server

    Baffioni, Stephanie; Ferri, Federico; Futyan, David; Meridiani, Paolo; Puljak, Ivica; Rovelli, Chiara; Salerno, Roberto; Sirois, Yves

    2006-01-01

    The reconstruction of the energy and momentum of isolated electrons in CMS combining tracking and electromagnetic calorimetry information is described. The emphasis is put on primary electrons with transverse momentum below 50 GeV/c. The energy deposited in the electromagnetic calorimeter is measured in superclusters which collect bremsstrahlung photons emitted along the electron trajectory in the tracker volume. The electron tracks are built from seeds in the pixel detector found via a cluster-driven pixel hit matching algorithm, followed by a reconstruction of trajectories in the silicon strip tracker with a Gaussian Sum Filter. Electrons are classified using observables sensitive to the pattern of bremsstrahlung emission and electromagnetic showering in the tracker material. Energy scale corrections depending on the electron class are applied to the supercluster and estimates of associated errors are obtained. The electron energy is deduced from a weighted combination of the corrected supercluster energy a...

  16. Electron crystallography and aquaporins.

    Science.gov (United States)

    Schenk, Andreas D; Hite, Richard K; Engel, Andreas; Fujiyoshi, Yoshinori; Walz, Thomas

    2010-01-01

    Electron crystallography of two-dimensional (2D) crystals can provide information on the structure of membrane proteins at near-atomic resolution. Originally developed and used to determine the structure of bacteriorhodopsin (bR), electron crystallography has recently been applied to elucidate the structure of aquaporins (AQPs), a family of membrane proteins that form pores mostly for water but also other solutes. While electron crystallography has made major contributions to our understanding of the structure and function of AQPs, structural studies on AQPs, in turn, have fostered a number of technical developments in electron crystallography. In this contribution, we summarize the insights electron crystallography has provided into the biology of AQPs, and describe technical advancements in electron crystallography that were driven by structural studies on AQP 2D crystals. In addition, we discuss some of the lessons that were learned from electron crystallographic work on AQPs. Copyright © 2010 Elsevier Inc. All rights reserved.

  17. Seeing with electrons

    International Nuclear Information System (INIS)

    Nellist, P.

    2006-01-01

    Commercially available lens correctors are extending the reach of electron microscopes to unprecedented atomic scales, as Peter Nellist describes. The electron microscope was invented in 1933 and is based on the principle that electrons have a wavelength that is inversely proportional to their momentum. There are two basic types: transmission electron microscopes and scanning electron microscopes, plus a hybrid of the two. The lenses in an electron microscope are provided by electromagnetic fields, but they suffer from spherical aberration. The addition of octupole and quadrupole corrector fields has improved the resolution of the electron microscope to better than 0.1 nm in the last decade. The next step is to correct for chromatic aberration, after which the resolution of the microscope will probably be limited by the size of the atom itself. (U.K.)

  18. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  19. Advanced adhesives in electronics

    CERN Document Server

    Bailey, C

    2011-01-01

    Adhesives are widely used in the manufacture of electronic devices to act as passive and active components. Recently there has been considerable interest in the use of conductive adhesives. This book reviews key types of conductive adhesives, processing methods, properties and the way they can be modelled as well as potential applications.$bAdhesives for electronic applications serve important functional and structural purposes in electronic components and packaging, and have developed significantly over the last few decades. Advanced adhesives in electronics reviews recent developments in adhesive joining technology, processing and properties. The book opens with an introduction to adhesive joining technology for electronics. Part one goes on to cover different types of adhesive used in electronic systems, including thermally conductive adhesives, isotropic and anisotropic conductive adhesives and underfill adhesives for flip-chip applications. Part two focuses on the properties and processing of electronic ...

  20. Automotive electronics design fundamentals

    CERN Document Server

    Zaman, Najamuz

    2015-01-01

    This book explains the topology behind automotive electronics architectures and examines how they can be profoundly augmented with embedded controllers. These controllers serve as the core building blocks of today’s vehicle electronics. Rather than simply teaching electrical basics, this unique resource focuses on the fundamental concepts of vehicle electronics architecture, and details the wide variety of Electronic Control Modules (ECMs) that enable the increasingly sophisticated "bells & whistles" of modern designs.  A must-have for automotive design engineers, technicians working in automotive electronics repair centers and students taking automotive electronics courses, this guide bridges the gap between academic instruction and industry practice with clear, concise advice on how to design and optimize automotive electronics with embedded controllers.

  1. ELECTRON COOLING OF RHIC.

    Energy Technology Data Exchange (ETDEWEB)

    BEN-ZVI, I.; LITVINENKO, V.; BARTON, D.; ET AL.

    2005-05-16

    We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV.

  2. Challenges in preventive psychiatry

    Directory of Open Access Journals (Sweden)

    Pratap Sharan

    2017-01-01

    Full Text Available Prevention of mental disorders offers opportunities for decreasing enormous health, economic, and social burden attributable to them. Substantial evidence exist showing effectiveness of prevention strategies in reducing risk factors, strengthening protective factors, and decreasing psychiatric symptoms and disability. The government and various stakeholders should work toward developing policies on national and regional levels for the prevention of mental disorders and integrate them with various public policies. Research should be focused on enhancing the evidence base for these interventions. It should also cover additional domains such as quantification of the burden of disease associated with particular risk factors, the interaction between lifestyle behaviors and mental health, and integrating mental health outcome measures in large community-based interventions for noncommunicable diseases. Special efforts should be made in devising alternative strategies to deliver these programs in low-resource settings. Integrating the research from the field of neurosciences with prevention strategies can augment the effort in this direction. One of the important challenges is to design programs that are either indigenously developed or culturally adapted. Mental health professionals have to play an important and multiple roles to make prevention of mental and behavioral disorders a reality.

  3. Diabetes mellitus prevention.

    Science.gov (United States)

    Allende-Vigo, Myriam Zaydee

    2015-01-01

    The aim of this study was to review lifestyle modification interventions and pharmacological clinical studies designed to prevent diabetes and provide evidence-based recommendations for the prevention of Diabetes Mellitus. A review of relevant literature compiled via a literature search (PUBMED) of English-language publications between 1997 and 2010 was conducted. It is found that people at increased risk of developing type 2 diabetes mellitus can halt the development of the disease. Lifestyle modification intervention with reduction of 5%-10% of excess body weight and increase in moderate physical activity by 150 min/wk has consistently proven to reduce the appearance of diabetes in different at-risk populations. Pharmacologic interventions have also demonstrated the prevention of the appearance of diabetes in persons at risk. Bariatric surgery has decreased the appearance of diabetes patients in a select group of individuals. The progression from prediabetes to diabetes mellitus can be prevented. Lifestyle modification intervention changes with weight loss and increased physical activity are currently recommended for the prevention of diabetes.

  4. Vitamin D and Cancer Prevention

    Science.gov (United States)

    ... Cancer Genetics Services Directory Cancer Prevention Overview Research Vitamin D and Cancer Prevention On This Page What is vitamin D? Why are cancer researchers studying a possible connection ...

  5. Prevention of COPD exacerbations

    DEFF Research Database (Denmark)

    Vestbo, Jørgen; Lange, Peter

    2015-01-01

    Exacerbations have significant impact on the morbidity and mortality of patients with chronic obstructive pulmonary disease. Most guidelines emphasise prevention of exacerbations by treatment with long-acting bronchodilators and/or anti-inflammatory drugs. Whereas most of this treatment is evidence......-based, it is clear that patients differ regarding the nature of exacerbations and are likely to benefit differently from different types of treatment. In this short review, we wish to highlight this, suggest a first step in differentiating pharmacological exacerbation prevention and call for more studies...... in this area. Finally, we wish to highlight that there are perhaps easier ways of achieving similar success in exacerbation prevention using nonpharmacological tools....

  6. Prevention of food allergy

    DEFF Research Database (Denmark)

    Halken, S

    1997-01-01

    incidence of food allergy, especially cow's milk protein allergy/intolerance (CMPA/CMPI), in the first 4 years of life. As no studies have been conducted pertaining to the preventive effect of avoidance of milk and other foods after the age of 4-6 months, recommendation of preventive elimination diets......Development of a food allergy appears to depend on both genetic factors and exposure-especially in early infancy-to food proteins. In prospective studies, the effect of dietary allergy prevention programmes has only been demonstrated in high-risk infants, i.e. infants with at least one first degree...... relative with documented atopic disease. High-risk infants feeding exclusively on breast milk and/or extensively hydrolysed formula (eHF) combined with avoidance of cow's milk proteins and solid foods during at least the first 4 months of life are found to have a significant reduction in the cumulative...

  7. Prevention of acute malnutrition

    DEFF Research Database (Denmark)

    de Pee, Saskia; Grais, Rebecca; Fenn, Bridget

    2015-01-01

    Acute malnutrition is associated with increased morbidity and mortality risk. When episodes are prolonged or frequent, acute malnutrition is also associated with poor growth and development, which contributes to stunting Nutrition-specific and nutrition-sensitive strategies to prevent...... seasons or emergencies, or increased incidence of illness, such as diarrhea or measles, additional efforts are required to prevent and treat wasting. Special nutritious foods directly meet the increased nutrient requirements of children at risk for wasting; assistance to vulnerable households, in the form...... of cash or food, enables households to better meet the food, health, and other needs of household members and may increase resilience; water, sanitation, and hygiene (WASH) and health interventions help prevent and address illness and hence reduce wasting risk. The contributions of specific interventions...

  8. Prevention of food allergy

    DEFF Research Database (Denmark)

    Halken, S

    1997-01-01

    Development of a food allergy appears to depend on both genetic factors and exposure-especially in early infancy-to food proteins. In prospective studies, the effect of dietary allergy prevention programmes has only been demonstrated in high-risk infants, i.e. infants with at least one first degree...... incidence of food allergy, especially cow's milk protein allergy/intolerance (CMPA/CMPI), in the first 4 years of life. As no studies have been conducted pertaining to the preventive effect of avoidance of milk and other foods after the age of 4-6 months, recommendation of preventive elimination diets...... relative with documented atopic disease. High-risk infants feeding exclusively on breast milk and/or extensively hydrolysed formula (eHF) combined with avoidance of cow's milk proteins and solid foods during at least the first 4 months of life are found to have a significant reduction in the cumulative...

  9. Scanning ultrafast electron microscopy.

    Science.gov (United States)

    Yang, Ding-Shyue; Mohammed, Omar F; Zewail, Ahmed H

    2010-08-24

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for which the pulse contains at most one or a few electrons, thus achieving imaging without the space-charge effect between electrons, and still in ten(s) of seconds. For imaging, the secondary electrons from surface structures are detected, as demonstrated here for material surfaces and biological specimens. By recording backscattered electrons, diffraction patterns from single crystals were also obtained. Scanning pulsed-electron microscopy with the acquired spatiotemporal resolutions, and its efficient heat-dissipation feature, is now poised to provide in situ 4D imaging and with environmental capability.

  10. Engineered phages for electronics.

    Science.gov (United States)

    Cui, Yue

    2016-11-15

    Phages are traditionally widely studied in biology and chemistry. In recent years, engineered phages have attracted significant attentions for functionalization or construction of electronic devices, due to their specific binding, catalytic, nucleating or electronic properties. To apply the engineered phages in electronics, these are a number of interesting questions: how to engineer phages for electronics? How are the engineered phages characterized? How to assemble materials with engineered phages? How are the engineered phages micro or nanopatterned? What are the strategies to construct electronics devices with engineered phages? This review will highlight the early attempts to address these questions and explore the fundamental and practical aspects of engineered phages in electronics, including the approaches for selection or expression of specific peptides on phage coat proteins, characterization of engineered phages in electronics, assembly of electronic materials, patterning of engineered phages, and construction of electronic devices. It provides the methodologies and opens up ex-cit-ing op-por-tu-ni-ties for the development of a variety of new electronic materials and devices based on engineered phages for future applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Prevention of hand eczema

    DEFF Research Database (Denmark)

    Fisker, Maja H; Ebbehøj, Niels E; Vejlstrup, Søren Grove

    2018-01-01

    Objective Occupational hand eczema has adverse health and socioeconomic impacts for the afflicted individuals and society. Prevention and treatment strategies are needed. This study aimed to assess the effectiveness of an educational intervention on sickness absence, quality of life and severity...... of hand eczema. Methods PREVEX (PreVention of EXema) is an individually randomized, parallel-group superiority trial investigating the pros and cons of one-time, 2-hour, group-based education in skin-protective behavior versus treatment as usual among patients with newly notified occupational hand eczema...

  12. Preventing falls and fractures.

    Science.gov (United States)

    Ulfarsson, J; Robinson, B E

    1994-11-01

    One of four persons over age 65 in the community falls; those over age 75 in institutions fall more frequently. Falls, a complex phenomena suggesting present disease and predicting future disability, are caused by interactions between the environment and dynamic balance which is determined by the quality of sensory input, central processing, and motor responses. Clinical factors which predispose to falling often produce observable disturbances in gait and balance, making observation critical in assessment. Acute illness and drug therapy produce particularly preventable falls. Therapeutic exercise and environmental modification for safety are the clinical interventions most likely to successfully prevent fall-related injury.

  13. Preventing Errors in Laterality

    OpenAIRE

    Landau, Elliot; Hirschorn, David; Koutras, Iakovos; Malek, Alexander; Demissie, Seleshie

    2014-01-01

    An error in laterality is the reporting of a finding that is present on the right side as on the left or vice versa. While different medical and surgical specialties have implemented protocols to help prevent such errors, very few studies have been published that describe these errors in radiology reports and ways to prevent them. We devised a system that allows the radiologist to view reports in a separate window, displayed in a simple font and with all terms of laterality highlighted in sep...

  14. [Preventive strategies for dementia].

    Science.gov (United States)

    Müller, Patrick; Schmicker, Marlen; Müller, Notger G

    2017-05-01

    In the context of the demographically induced increase in the prevalence of dementia and the simultaneous lack of causal pharmacological therapies, preventive approaches are gaining in importance. By reducing risk factors and with measures which induce neuroplasticity successful aging can be supported. This article summarizes the current developments in preventing dementia by modification of life style factors. The main focus lies on the impact of cognitive and physical activity on neuroprotection. A promising approach combines both activities within a dance training program. Further studies that meet the demanding criteria of a randomized clinical trial are urgently needed.

  15. HOW TO PREVENT FRAUD?

    Directory of Open Access Journals (Sweden)

    Ionela – Corina Chersan

    2009-09-01

    Full Text Available Fraud can range from minor employee theft and unproductive behavior tomisappropriation of assets and fraudulent financial reporting. The risk of fraud can be reduced through a combination of prevention and detection measures. Moreover, prevention and deterrence measures are much less costly than the time and expense required for fraud detection and investigation. The information presented in this document generally is applicable to entities of all sizes. However, the degree to which certain programs and controls are applied in smaller, less-complex entities and the formality of theirapplication are likely to differ from larger organizations.

  16. Preventing Melanoma PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2015-06-02

    This 60 second public service announcement is based on the June 2015 CDC Vital Signs report. Skin cancer is the most common form of cancer in the U.S. In 2011, there were more than 65,000 cases of melanoma, the most deadly form of skin cancer. Learn how everyone can help prevent skin cancer.  Created: 6/2/2015 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 6/2/2015.

  17. Building in Prevention

    DEFF Research Database (Denmark)

    Troelsen, Jens

    2013-01-01

    Health interventions can be seen as initiatives that seek to prevent the emergence and development of impaired public health. Initiatives made in the area of prophylaxis can be experienced as anything from direct invasions of personal freedom to small traffic bumps on the roads. In this spectrum...... preventive work might be changed to direct focus onto a greater extent on establishing frameworks for people to master their own lives instead of one-sided initiatives, which leave the individual with a sense of guilt at their own illness....

  18. Aspirin for Primary Prevention.

    Science.gov (United States)

    Richman, Ilana B; Owens, Douglas K

    2017-07-01

    Aspirin reduces the risk of nonfatal myocardial infarction and stroke, and the risk of colorectal cancer. Aspirin increases the risk of gastrointestinal and intracranial bleeding. The best available evidence supports initiating aspirin in select populations. In 2016, the US Preventive Services Task Force recommended initiating aspirin for the primary prevention of both cardiovascular disease and colorectal cancer among adults ages 50 to 59 who are at increased risk for cardiovascular disease. Adults 60 to 69 who are at increased cardiovascular disease risk may also benefit. There remains considerable uncertainty about whether younger and older patients may benefit. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Electronic Publishing or Electronic Information Handling?

    Science.gov (United States)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

  20. Gender-Based Violence Prevention. Issues in Prevention

    Science.gov (United States)

    Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

    2012-01-01

    This issue of "Issues in Prevention" focuses on gender-based violence prevention. This issue contains the following articles: (1) Preventing Gender-Based Violence: An Overview (Linda Langford); (2) Q&A With Amelia Cobb; (3) Denim Day at HBCUs; (4) Dear Colleague Letter; (5) ED Grants for Violence Prevention; and (6) Higher Education Center…

  1. Vaccination and the prevention problem.

    Science.gov (United States)

    Dawson, Angus

    2004-11-01

    This paper seeks to critically review a traditional objection to preventive medicine (which I call here the 'prevention problem'). The prevention problem is a concern about the supposedly inequitable distribution of benefits and risks of harm resulting from preventive medicine's focus on population-based interventions. This objection is potentially applicable to preventive vaccination programmes and could be used to argue that such programmes are unethical. I explore the structure of the prevention problem by focusing upon two different types of vaccination (therapeutic vaccination and preventive vaccination). I argue that the 'prevention problem' cannot be fairly applied to the case of preventive vaccination because such programmes do not just focus upon benefits at the level of populations (as is claimed by the prevention problem). Most such preventive vaccination programmes explicitly seek to create and maintain herd protection. I argue that herd protection is an important public good which is a benefit shared by all individuals in the relevant population. This fact can then be used to block the 'prevention problem' argument in relation to preventive vaccination programmes. I conclude by suggesting that whilst the future development and use of therapeutic vaccines does raise some interesting ethical issues, any ethical objections to prophylactic vaccination on the basis of the 'prevention problem' will not be overcome through the substitution of therapeutic vaccines for preventive vaccines; indeed, the 'prevention problem' fails on its own terms in relation to preventive vaccination programmes.

  2. Control of insect pests with electrons

    International Nuclear Information System (INIS)

    Hayashi, Toru; Imamura, Taro; Miyanoshita, Akihiro; Todoriki, Setsuko

    2003-01-01

    Effects of electron beams with an energy of 2.5 MeV on insect pests were slightly smaller than those of gamma-rays. Electron beams at 400 Gy inactivated all the pests for cut flowers tested; spider mite (Tetraychus urticae), mealybug (Pseudococcus comstocki), leaf miner (Liriomyza trifolii), thrips (Thrips palmi, and Thrips tabaci), cutworm (Spodoptera litura) and aphid (Myzus persicae). Carnation, alstromeria, gladiolus, tulip, statice, stock, dendrobium, prairie gentian, oncidium, campanula, gloriosa, fern, gypsophila, freesia, lobelia, triteleia and gerbera were tolerant to electron beams at 400-600 Gy, while chrysanthemum, rose, lily, calla, antherium, sweet pea and iris were intolerant. Radiation-induced deterioration of chrysanthemum could be prevented by post-irradiation treatment with commercial preservative solutions or sugar solutions. Soft-electrons at 60 keV effectively inactivated eggs, larvae and pupae of red flour beetle (Tribolium castaneum) and Indian meal moth (Plodia interpunctella) and eggs of adzuki bean weevil (Callosobruchus chinensis) at a dose of 1 kGy. The adults of T. castaneum and P. interpunctella were inactivated by electron treatment at 5.0 kGy and 7.5 kGy, respectively. Adults of C. chinensis survived at 7.5 kGy, but were inactivated having lost ability to walk at 2.5 kGy. Soft-electrons at 60 keV could not completely inactivate the larvae of C. chinensis and smaller larvae (2nd instar) of maize weevil (Stiophilus zeamais) inside beans and grains, because the electrons with low penetration did not reach the larvae due to the shield of beans or grains. However, soft-electrons at 60 keV inactivated eggs, larger larvae (4th instar) and pupae of S. zeamais in rice grains, which indicated that S. zeamais was exposed to electrons even inside the grains. (author)

  3. Field emission electron source

    Science.gov (United States)

    Zettl, Alexander Karlwalter; Cohen, Marvin Lou

    2000-01-01

    A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

  4. Interoperability for electronic ID

    OpenAIRE

    Zygadlo, Zuzanna

    2009-01-01

    Electronic Business, including eBanking, eCommerce and eGovernmental services, is today based on a large variety of security solutions, comprising electronic IDs provided by a broad community of Public Key Infrastructure (PKI) vendors. Significant differences in implementations of those solutions introduce a problem of lack of interoperability in electronic business, which have not yet been resolved by standardization and interoperability initiatives based on existing PKI trust models. It i...

  5. Introduction to electronics

    CERN Document Server

    Korneff, Theodore

    1966-01-01

    Introduction to Electronics focuses on the study of electronics and electronic devices. Composed of 14 chapters, the book starts with discussions on dc circuits, including resistance, voltmeter, ammeter, galvanometer, internal resistance, and positive and negative currents. This topic is followed by discussions on ac circuits, particularly addressing voltage and current, average power, resistive load, complex plane, and parallel circuits. Discussions also focus on filters and tuned circuits, diodes, and power supplies. Particularly given attention are the processes, diagrams, and analyses

  6. Modern electronic materials

    CERN Document Server

    Watkins, John B

    2013-01-01

    Modern Electronic Materials focuses on the development of electronic components. The book first discusses the history of electronic components, including early developments up to 1900, developments up to World War II, post-war developments, and a comparison of present microelectric techniques. The text takes a look at resistive materials. Topics include resistor requirements, basic properties, evaporated film resistors, thick film resistors, and special resistors. The text examines dielectric materials. Considerations include basic properties, evaporated dielectric materials, ceramic dielectri

  7. Electronic collection management

    CERN Document Server

    Mcginnis, Suzan D

    2013-01-01

    Build and manage your collection of digital resources with these successful strategies! This comprehensive volume is a practical guide to the art and science of acquiring and organizing electronic resources. The collections discussed here range in size from small college libraries to large research libraries, but all are facing similar problems: shrinking budgets, increasing demands, and rapidly shifting formats. Electronic Collection Management offers new ideas for coping with these issues. Bringing together diverse aspects of collection development, Electronic Collection

  8. Electron microscopy of surfaces

    International Nuclear Information System (INIS)

    Venables, J.A.

    1981-01-01

    Electron beam techniques used to study clean surfaces and surface processes on a microscopic scale are reviewed. Recent experimental examples and possible future developments are discussed. Special emphasis is given to (i) transmission diffraction and microscopy techniques, including atomic imaging; (ii) Auger microscopy on bulk and thin film samples; (iii) secondary electron microscopy, especially low energy secondaries for work-function imaging and photoelectron imaging; and (iv) reflection electron microscopy and diffraction. (orig.)

  9. Introduction to printed electronics

    CERN Document Server

    Suganuma, Katsuaki

    2014-01-01

    This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large, and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.

  10. Electron microscopy and diffraction

    International Nuclear Information System (INIS)

    Gjoennes, J.; Olsen, A.

    1986-01-01

    This report is a description of research activities and plans at the electron microscopy laboratorium, Physics Department, University of Oslo. Since the first electron microscope was installed in 1968, the research has covered inorganic structures, physical metallurgy, as well as theory of electron scattering and the development of methods in this field. The current plans involve efforts in the development of crystallographic and spectroscopic methods

  11. New electronics stuff chemistry

    International Nuclear Information System (INIS)

    Byeon, Su Il

    2003-04-01

    The first part of this book is about equilibrium electrochemistry on electric thermo dynamic equilibrium state of electrochemistry, crystal defect of solid, thermodynamics on defect electron and election in semiconductor, Gawani potential, volta potential and equilibrium potential and thermodynamics application in Gawani battery. The second part deals with dynamic electrochemistry electrode reaction kinetics and corrosion potential in normal state, diffusion and transport of ion and electron and current impedance spectroscopy. It also mentions industrial electrochemistry and laboratory works in electronics chemistry course.

  12. Physical foundations of electron microscopy

    International Nuclear Information System (INIS)

    Alexander, H.

    1997-01-01

    The following topics were dealt with: Physical foundations, dynamic theory of diffraction contrasts, dynamic theory of electron diffraction, electron diffraction on crystals with defects, high-resolution electron microscopy, analytical electron microscopy

  13. To Prevent Misbehavior

    OpenAIRE

    Telep, Valya Goodwin, 1955-

    2009-01-01

    This series of lessons was prepared for parents like you - parents who want to do a better job of disciplining their children. The lessons were especially written for parents of preschool children, ages two to six, but some of the discipline methods are appropriate for older children, too. This lesson focuses on preventing misbehavior.

  14. Prevention of postoperative ileus

    DEFF Research Database (Denmark)

    Holte, Kathrine; Kehlet, H

    2002-01-01

    mediators. We update evidence on the advances in the prevention and treatment on PI. As single interventions, continuous thoracic epidural analgesia with local anesthetics and minimally invasive surgery are the most efficient interventions in the reduction of PI. The effects of pharmacological agents have...

  15. Preventing School Violence

    Science.gov (United States)

    Rulloda, Rudolfo Barcena

    2011-01-01

    School violence has mushroomed into a devastating epidemic and is deteriorating the basic foundation of education. In this article, the author will present several teaching strategies for preventing school violence from becoming an arduous enigma within the classroom and school environments, and focus on assessment and reflection in order to…

  16. Preventing Adolescent Suicide.

    Science.gov (United States)

    Capuzzi, David

    The adolescent at risk for suicidal preoccupation and behavior has become an increasing concern for schools and communities. This paper presents some of the causes of teen suicide, things adults should know about adolescent suicide prevention, and what can be done to help such youth. The transition to adolescence is a complex time when many values…

  17. Preventive medicine in 2030.

    Science.gov (United States)

    Freudenberg, Nicholas

    2012-12-01

    This invited commentary imagines two futures for preventive medicine and public health in the Year 2030. Using satire, the commentary describes one future in which large corporations control public health and another where a robust public sector plays the leading role. Copyright © 2012. Published by Elsevier Inc.

  18. Eating Disorder Prevention Programming.

    Science.gov (United States)

    Sapia, Jennifer L.

    This paper provides information for school psychologists regarding the necessity and benefits of school-based prevention programming for students at risk for developing eating disorders (i.e., females). School-based programming is a cost-effective means of reaching the largest number of individuals at once and identifying those individuals…

  19. Police and Suicide Prevention.

    Science.gov (United States)

    Marzano, Lisa; Smith, Mark; Long, Matthew; Kisby, Charlotte; Hawton, Keith

    2016-05-01

    Police officers are frequently the first responders to individuals in crisis, but generally receive little training for this role. We developed and evaluated training in suicide awareness and prevention for frontline rail police in the UK. To investigate the impact of training on officers' suicide prevention attitudes, confidence, and knowledge. Fifty-three participants completed a brief questionnaire before and after undertaking training. In addition, two focus groups were conducted with 10 officers to explore in greater depth their views and experiences of the training program and the perceived impact on practice. Baseline levels of suicide prevention attitudes, confidence, and knowledge were mixed but mostly positive and improved significantly after training. Such improvements were seemingly maintained over time, but there was insufficient power to test this statistically. Feedback on the course was generally excellent, notwithstanding some criticisms and suggestions for improvement. Training in suicide prevention appears to have been well received and to have had a beneficial impact on officers' attitudes, confidence, and knowledge. Further research is needed to assess its longer-term effects on police attitudes, skills, and interactions with suicidal individuals, and to establish its relative effectiveness in the context of multilevel interventions.

  20. [Improving suicide prevention].

    Science.gov (United States)

    Debout, Michel

    2017-04-01

    Suicidal thoughts precede a suicide attempt. Knowing the people who are exposed to such thoughts enables prevention to be improved. The results of a study of the general population show that one in five French people claim to have already seriously considered committing suicide. This represents a particularly concerning public health issue. Copyright © 2017. Published by Elsevier Masson SAS.

  1. Responsible Hospitality. Prevention Updates

    Science.gov (United States)

    Colthurst, Tom

    2004-01-01

    Responsible Hospitality (RH)--also called Responsible Beverage Service (RBS)--encompasses a variety of strategies for reducing risks associated with the sale and service of alcoholic beverages. RH programs have three goals: (1) to prevent illegal alcohol service to minors; (2) to reduce the likelihood of drinkers becoming intoxicated; and (3) to…

  2. Preventable amputations in Ethiopia

    African Journals Online (AJOL)

    Sew. Mi. 6. Discussion. Gas gangre. Total. This study thus confirms that at the present time about a half of the limbs being amputated at our. Hospital (and probably throughout Ethiopia) could have been saved, or prevented by relatively simple means. These include reducing the number of road traffic accident casualties by ...

  3. Bullying Prevention for Kids

    Centers for Disease Control (CDC) Podcasts

    2012-01-19

    This podcast discusses what victims of bullying may experience and provides recommendations for coping with it.  Created: 1/19/2012 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 1/19/2012.

  4. Teenage Pregnancy Prevention.

    Science.gov (United States)

    Peters, Sheila; And Others

    1991-01-01

    Peer counselors and staff members describe the "I Have a Future" Program at Meharry Medical College in Nashville (Tennessee). This program focuses on pregnancy prevention by providing education, health care, and increased life options; social skills training; an entrepreneurial program; and separate classes for African-American youth.…

  5. Wound Care: Preventing Infection

    Science.gov (United States)

    ... or wearing your Immediate Post-op or preliminary prosthesis; keep it elevated whenever possible. The limb should be raised above the level of your heart to prevent swelling. Take care of your whole self – body, mind, and spirit. Eat well and drink plenty ...

  6. Student Leadership. Prevention Updates

    Science.gov (United States)

    Langford, Linda; DeJong, William

    2010-01-01

    Campus-based efforts to reduce alcohol and other drug abuse and violence (AODV) will be more successful if they involve a wide range of stakeholders--including students--who can contribute to the program's design, implementation, and evaluation. Students provide a unique perspective on AODV prevention, and they can also bring a certain authority…

  7. Preventing Skin Cancer

    Centers for Disease Control (CDC) Podcasts

    2016-05-18

    A man and a woman talk about how they’ve learned to protect their skin from the sun over the years. .  Created: 5/18/2016 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 5/18/2016.

  8. Injury Prevention Research

    Centers for Disease Control (CDC) Podcasts

    2009-09-01

    Research provides the knowledge that we need to understand what is possible, what is not, and the best way to proceed in our intervention efforts.  Created: 9/1/2009 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 9/1/2009.

  9. [Prevention of preeclampsia - review].

    Science.gov (United States)

    Vlk, R; Matěcha, J; Drochýtek, V

    2015-06-01

    Preeclampsia is a serious condition that affects about five percent of pregnant women. The disorder itself or related complications are responsible for a significant percentage of maternal and fetal morbidity, even in developed countries. Although our understanding of etiology is still limited, the possibility of detecting and evaluating certain angiogenic factors by the end of the first trimester gives food for thought about prospects for preeclampsia prevention. Secondary prevention is currently based mostly on the effort to pharmacologically affect the spiral artery transformation and development of the abnormal placental microcirculation which lead to clinical symptoms of preeclampsia. The preventive treatment options are narrow. Greatest effect was noted with acetylsalicylic acid medication in the at-risk population. The dose of 75-150 mg per day is considered optimal. The treatment should start before the 16th gestational week; later initiation of therapy is associated with considerably smaller effect. The incidence of the early-onset preeclampsia (preventive treatment affects the late-onset preeclampsia only minimally. Calcium supplementation is effective only in women with low calcium intake. Question for the future as well as subject of several studies is a clinical significance of low molecular weight heparin and sildenafil.

  10. Travel health prevention.

    Science.gov (United States)

    Korzeniewski, Krzysztof

    All around the world there has been a rapid growth in the number of international travels. According to the World Tourism Organisation the number of international tourist arrivals reached 1,235 billion in 2016 and continues to grow at a high rate. This has been much due to the development of air transport (including low-cost airlines), increasingly common economic migration, a growing number of travellers visiting friends and relatives, and an increase in medical tourism. With tropical destinations becoming increasingly popular among travellers, doctors have seen a rising number of patients who seek medical advice on health risks prevalent in hot countries and health prevention measures to be taken in tropical destinations, especially where sanitation is poor. The risk for developing a medical condition while staying abroad depends on a variety of factors, including the traveller's general health condition, health prevention measures taken before or during travel (vaccinations, antimalarial chemoprophylaxis, health precautions during air, road and sea travel, proper acclimatisation, prevention of heat injuries, protection against local flora and fauna, personal hygiene, water, food and feeding hygiene), as well as the prevalence of health risk factors in a given location. Health prevention is a precondition for safe travel and maintaining good physical health; in the era of a rapid growth in international tourism it has become of key importance for all travellers.

  11. Scabies: Prevention and Control

    Science.gov (United States)

    ... prevent possible reexposure and reinfestation. Bedding and clothing worn or used next to the skin anytime during the 3 days before treatment should be machine washed and dried using the hot water and hot dryer cycles or be dry-cleaned. ...

  12. Ounce of Prevention.

    Science.gov (United States)

    Cleary, Frank J.; Bell, Nathan

    1990-01-01

    Binghampton (New York) Schools begin their dropout prevention efforts even before children are born--as early as the third trimester of pregnancy. One intervention program is PACT (Parents and Children Together), which helps parents become better "first teachers." The program's success derives from parents' effectiveness as teachers and…

  13. Preventing Pressure Sores

    Medline Plus

    Full Text Available ... OTR/L Sarah Harrison, OT Anne Bryden, OT The Role of the Social Worker after Spinal Cord Injury Patti Rogers, ... do to prevent pressure sores? play_arrow What role does diet and hydration play in ... play_arrow What are the six stages of a pressure sore and how ...

  14. Stationary Electron Atomic Model

    Science.gov (United States)

    Pressler, David E.

    1998-04-01

    I will present a novel theory concerning the position and nature of the electron inside the atom. This new concept is consistant with present experimental evidence and adheres strictly to the valence-shell electron-pair repulsion (VSEPR) model presently used in chemistry for predicting the shapes of molecules and ions. In addition, I will discuss the atomic model concept as being a true harmonic oscillator, periodic motion at resonant frequency which produces radiation at discrete frequencies or line spectra is possible because the electron is under the action of two restoring forces, electrostatic attraction and superconducting respulsion of the electron's magnetic field by the nucleus.

  15. Electronic signal conditioning

    CERN Document Server

    NEWBY, BRUCE

    1994-01-01

    At technician level, brief references to signal conditioning crop up in a fragmented way in various textbooks, but there has been no single textbook, until now!More advanced texts do exist but they are more mathematical and presuppose a higher level of understanding of electronics and statistics. Electronic Signal Conditioning is designed for HNC/D students and City & Guilds Electronics Servicing 2240 Parts 2 & 3. It will also be useful for BTEC National, Advanced GNVQ, A-level electronics and introductory courses at degree level.

  16. Electron correlation in molecules

    CERN Document Server

    Wilson, S

    2007-01-01

    Electron correlation effects are of vital significance to the calculation of potential energy curves and surfaces, the study of molecular excitation processes, and in the theory of electron-molecule scattering. This text describes methods for addressing one of theoretical chemistry's central problems, the study of electron correlation effects in molecules.Although the energy associated with electron correlation is a small fraction of the total energy of an atom or molecule, it is of the same order of magnitude as most energies of chemical interest. If the solution of quantum mechanical equatio

  17. The auroral electron accelerator

    International Nuclear Information System (INIS)

    Bryant, D.A.; Hall, D.S.

    1989-01-01

    A model of the auroral electron acceleration process is presented in which the electrons are accelerated resonantly by lower-hybrid waves. The essentially stochastic acceleration process is approximated for the purposes of computation by a deterministic model involving an empirically derived energy transfer function. The empirical function, which is consistent with all that is known of electron energization by lower-hybrid waves, allows many, possibly all, observed features of the electron distribution to be reproduced. It is suggested that the process occurs widely in both space and laboratory plasmas. (author)

  18. Electronics circuits and systems

    CERN Document Server

    Bishop, Owen

    2011-01-01

    The material in Electronics - Circuits and Systems is a truly up-to-date textbook, with coverage carefully matched to the electronics units of the 2007 BTEC National Engineering and the latest AS and A Level specifications in Electronics from AQA, OCR and WJEC. The material has been organized with a logical learning progression, making it ideal for a wide range of pre-degree courses in electronics. The approach is student-centred and includes: numerous examples and activities; web research topics; Self Test features, highlighted key facts, formulae and definitions. Ea

  19. Electronics circuits and systems

    CERN Document Server

    Bishop, Owen

    2007-01-01

    The material in Electronics - Circuits and Systems is a truly up-to-date textbook, with coverage carefully matched to the electronics units of the 2007 BTEC National Engineering and the latest AS and A Level specifications in Electronics from AQA, OCR and WJEC. The material has been organized with a logical learning progression, making it ideal for a wide range of pre-degree courses in electronics. The approach is student-centred and includes: numerous examples and activities; web research topics; Self Test features, highlighted key facts, formulae and definitions. Each chapter ends with a set

  20. Electronics Environmental Benefits Calculator

    Science.gov (United States)

    The Electronics Environmental Benefits Calculator (EEBC) was developed to assist organizations in estimating the environmental benefits of greening their purchase, use and disposal of electronics.The EEBC estimates the environmental and economic benefits of: Purchasing Electronic Product Environmental Assessment Tool (EPEAT)-registered products; Enabling power management features on computers and monitors above default percentages; Extending the life of equipment beyond baseline values; Reusing computers, monitors and cell phones; and Recycling computers, monitors, cell phones and loads of mixed electronic products.The EEBC may be downloaded as a Microsoft Excel spreadsheet.See https://www.federalelectronicschallenge.net/resources/bencalc.htm for more details.

  1. Analytical Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — The Titan 80-300 is a transmission electron microscope (TEM) equipped with spectroscopic detectors to allow chemical, elemental, and other analytical measurements to...

  2. Electron caustic lithography

    Directory of Open Access Journals (Sweden)

    S. M. Kennedy

    2012-06-01

    Full Text Available A maskless method of electron beam lithography is described which uses the reflection of an electron beam from an electrostatic mirror to produce caustics in the demagnified image projected onto a resist–coated wafer. By varying the electron optics, e.g. via objective lens defocus, both the morphology and dimensions of the caustic features may be controlled, producing a range of bright and tightly focused projected features. The method is illustrated for line and fold caustics and is complementary to other methods of reflective electron beam lithography.

  3. High-power electronics

    CERN Document Server

    Kapitsa, Petr Leonidovich

    1966-01-01

    High-Power Electronics, Volume 2 presents the electronic processes in devices of the magnetron type and electromagnetic oscillations in different systems. This book explores the problems of electronic energetics.Organized into 11 chapters, this volume begins with an overview of the motion of electrons in a flat model of the magnetron, taking into account the in-phase wave and the reverse wave. This text then examines the processes of transmission of electromagnetic waves of various polarization and the wave reflection from grids made of periodically distributed infinite metal conductors. Other

  4. Flying Electronic Warfare Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides NP-3D aircraft host platforms for Effectiveness of Navy Electronic Warfare Systems (ENEWS) Program antiship missile (ASM) seeker simulators used...

  5. Electronics pocket book

    CERN Document Server

    Parr, E A

    1981-01-01

    Electronics Pocket Book, Fourth Edition is a nonmathematical presentation of the many varied topics covered by electronics. The book tackles electron physics, electronic components (i.e. resistors, capacitors, and conductors), integrated circuits, and the principles of a.c. and d.c. amplifiers. The text also discusses oscillators, digital circuits, digital computers, and optoelectronics (i.e., sensors, emitters, and devices that utilize light). Communications (such as line and radio communications, transmitters, receivers, and digital techniques); the principles and examples of servosystems; a

  6. Fundamentals of electronics

    CERN Document Server

    Schubert, Thomas F

    2015-01-01

    This book, Electronic Devices and Circuit Application, is the first of four books of a larger work, Fundamentals of Electronics. It is comprised of four chapters describing the basic operation of each of the four fundamental building blocks of modern electronics: operational amplifiers, semiconductor diodes, bipolar junction transistors, and field effect transistors. Attention is focused on the reader obtaining a clear understanding of each of the devices when it is operated in equilibrium. Ideas fundamental to the study of electronic circuits are also developed in the book at a basic level to

  7. Electronic circuits fundamentals & applications

    CERN Document Server

    Tooley, Mike

    2015-01-01

    Electronics explained in one volume, using both theoretical and practical applications.New chapter on Raspberry PiCompanion website contains free electronic tools to aid learning for students and a question bank for lecturersPractical investigations and questions within each chapter help reinforce learning Mike Tooley provides all the information required to get to grips with the fundamentals of electronics, detailing the underpinning knowledge necessary to appreciate the operation of a wide range of electronic circuits, including amplifiers, logic circuits, power supplies and oscillators. The

  8. Electronics Environmental Benefits Calculator

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Electronics Environmental Benefits Calculator (EEBC) was developed to assist organizations in estimating the environmental benefits of greening their purchase,...

  9. Electron clouds in high energy hadron accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Petrov, Fedor

    2013-08-29

    The formation of electron clouds in accelerators operating with positrons and positively charge ions is a well-known problem. Depending on the parameters of the beam the electron cloud manifests itself differently. In this thesis the electron cloud phenomenon is studied for the CERN Super Proton Synchrotron (SPS) and Large Hadron Collider (LHC) conditions, and for the heavy-ion synchrotron SIS-100 as a part of the FAIR complex in Darmstadt, Germany. Under the FAIR conditions the extensive use of slow extraction will be made. After the acceleration the beam will be debunched and continuously extracted to the experimental area. During this process, residual gas electrons can accumulate in the electric field of the beam. If this accumulation is not prevented, then at some point the beam can become unstable. Under the SPS and LHC conditions the beam is always bunched. The accumulation of electron cloud happens due to secondary electron emission. At the time when this thesis was being written the electron cloud was known to limit the maximum intensity of the two machines. During the operation with 25 ns bunch spacing, the electron cloud was causing significant beam quality deterioration. At moderate intensities below the instability threshold the electron cloud was responsible for the bunch energy loss. In the framework of this thesis it was found that the instability thresholds of the coasting beams with similar space charge tune shifts, emittances and energies are identical. First of their kind simulations of the effect of Coulomb collisions on electron cloud density in coasting beams were performed. It was found that for any hadron coasting beam one can choose vacuum conditions that will limit the accumulation of the electron cloud below the instability threshold. We call such conditions the ''good'' vacuum regime. In application to SIS-100 the design pressure 10{sup -12} mbar corresponds to the good vacuum regime. The transition to the bad vacuum

  10. Prevention of nuclear war

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    Removing the threat of a nuclear war-as the General Assembly formally stated in the Final Document of its first special session devoted to disarmament, in 1978-is considered to be the task of the present day. In that Document, the General Assembly sought to establish principles, guidelines and procedures for preventing nuclear war. It declared that to that end, it was imperative to remove the threat of nuclear weapons, to halt and reverse the nuclear-arms race until the total elimination of nuclear weapons and their delivery systems had been achieved (see chapter iv), and to prevent the proliferation of nuclear weapons (see chapter VII). At the same time, it called for other measures designed to prevent the outbreak of nuclear war and to lessen the danger of the treat or use of nuclear weapons. The Assembly's clear call for action was dictated by the awareness that there was no insuperable barrier dividing peace from war and that, unless nations brought the spiralling nuclear-arms race to an end, the day might come when nuclear weapons would actually be used, with catastrophic consequences. In adopting the Final Document, the international community achieved, for the first time, a consensus on an international disarmament strategy having as its immediate goal the elimination of the danger of a nuclear war and the implementation of measures to halt and reverse the arms race. The General Assembly, at its second special session on disarmament, in 1982, reaffirmed the validity of the 1978 Final Document. This paper reports that nuclear issues and in particular the prevention of nuclear war remain, however, major concerns of all States. Undoubtedly, all nations have a vital interest in the negotiation of effective measures for her prevention of nuclear war, since nuclear weapons pose a unique threat to human survival. If nuclear war were to occur, its consequences would be global, not simple regional

  11. Secondary emission electron gun using external primaries

    Science.gov (United States)

    Srinivasan-Rao, Triveni [Shoreham, NY; Ben-Zvi, Ilan [Setauket, NY

    2009-10-13

    An electron gun for generating an electron beam is provided, which includes a secondary emitter. The secondary emitter includes a non-contaminating negative-electron-affinity (NEA) material and emitting surface. The gun includes an accelerating region which accelerates the secondaries from the emitting surface. The secondaries are emitted in response to a primary beam generated external to the accelerating region. The accelerating region may include a superconducting radio frequency (RF) cavity, and the gun may be operated in a continuous wave (CW) mode. The secondary emitter includes hydrogenated diamond. A uniform electrically conductive layer is superposed on the emitter to replenish the extracted current, preventing charging of the emitter. An encapsulated secondary emission enhanced cathode device, useful in a superconducting RF cavity, includes a housing for maintaining vacuum, a cathode, e.g., a photocathode, and the non-contaminating NEA secondary emitter with the uniform electrically conductive layer superposed thereon.

  12. Advances in nonlethal electronic weaponry

    Science.gov (United States)

    McNulty, James F.

    1998-12-01

    Non-lethal electronic weapons in the form of tasers (a stand-off incapacitation device with a range of about 15 feet) and stun guns (which are not a gun, but a close contact stun device) have been used by law enforcement for over 18 years. The taser has dominated this market, since it does not require the close physical contact (with the resultant injuries) that the stun gun requires. Tasers are effective against even determined assailants where OC or pepper sprays consistently fail. The taser also does not have the close range lethality of low impact munitions. These electronic non-lethal weapons have saved the lives of thousands of suspects and have prevented the injury of thousands of law enforcement officers. Recent advances in laser sight technology have permitted the development of a patented dual laser sight that not only increased accuracy, but have made these weapons even more intimidating, increasing surrender rates. Now increased ranges are feasible and r & d on non-lethal military weapons to replace the anti-personnel landmine has resulted in new, unmanned, non-lethal taser weapons for law enforcement corrections and border patrol perimeter control use.

  13. Electron Beam Lithography

    Science.gov (United States)

    Harriott, Lloyd R.

    1997-04-01

    Electron beams have played a significant role in semiconductor technology for more than twenty years. Early electron beam machines used a raster scanned beam spot to write patterns in electron-sensitive polymer resist materials. The main application of electron beam lithography has been in mask making. Despite the inherently high spatial resolution and wide process margins of electron beam lithography, the writing rate for semiconductor wafers has been too slow to be economically viable on a large scale. In the late 1970's, variable shape electron beam writing was developed, projecting a rectangular beam whose size can be varied for each "shot" exposure of a particular pattern, allowing some integrated circuits to be made economically where a variety of "customized" patterns are desired. In the cell or block projection electron beam exposure technique, a unit cell of a repetitive pattern is projected repeatedly to increase the level of parallelism. This can work well for highly repetitive patterns such as memory chips but is not well suited to complex varying patterns such as microprocessors. The rapid progress in the performance of integrated circuits has been largely driven by progress in optical lithography, through improvements in lens design and fabrication as well as the use of shorter wavelengths for the exposure radiation. Due to limitations from the opacity of lens and mask materials, it is unlikely that conventional optical printing methods can be used at wavelengths below 193 nm or feature sizes much below 180 nm. One candidate technology for a post-optical era is the Scattering with Angular Limitation Projection Electron-beam Lithography (SCALPEL) approach, which combines the high resolution and wide process latitude inherent in electron beam lithography with the throughput of a parallel projection system. A mask consisting of a low atomic number membrane and a high atomic number pattern layer is uniformly illuminated with high energy (100 ke

  14. Engaging patients in pressure ulcer prevention.

    Science.gov (United States)

    Hudgell, Lynne; Dalphinis, Julie; Blunt, Chris; Zonouzi, Maryam; Procter, Susan

    2015-05-06

    As patients increasingly care for themselves at home, they require accessible information to enable informed self-care. This article describes the development of an educational electronic application (app) designed for use by patients at risk of pressure ulcers, and their carers. The app can be downloaded to Windows, Android or Apple smartphones or tablets. The app is based on the current pressure ulcer prevention and management guidelines from the National Pressure Ulcer Advisory Panel and the National Institute for Health and Care Excellence, and is designed to educate patients and carers about how to prevent a pressure ulcer, how to recognise a pressure ulcer, and what to do if they suspect they are developing a pressure ulcer. We hope the app will be used to help with educational conversations among patients, carers and healthcare professionals.

  15. Adherence with Preventive Medication in Childhood Asthma

    Directory of Open Access Journals (Sweden)

    Scott Burgess

    2011-01-01

    Full Text Available Suboptimal adherence with preventive medication is common and often unrecognised as a cause of poor asthma control. A number of risk factors for nonadherence have emerged from well-conducted studies. Unfortunately, patient report a physician's estimation of adherence and knowledge of these risk factors may not assist in determining whether non-adherence is a significant factor. Electronic monitoring devices are likely to be more frequently used to remind patients to take medication, as a strategy to motivate patients to maintain adherence, and a tool to evaluate adherence in subjects with poor disease control. The aim of this paper is to review non-adherence with preventive medication in childhood asthma, its impact on asthma control, methods of evaluating non-adherence, risk factors for suboptimal adherence, and strategies to enhance adherence.

  16. Prevention literacy: community-based advocacy for access and ownership of the HIV prevention toolkit.

    Science.gov (United States)

    Parker, Richard G; Perez-Brumer, Amaya; Garcia, Jonathan; Gavigan, Kelly; Ramirez, Ana; Milnor, Jack; Terto, Veriano

    2016-01-01

    Critical technological advances have yielded a toolkit of HIV prevention strategies. This literature review sought to provide contextual and historical reflection needed to bridge the conceptual gap between clinical efficacy and community effectiveness (i.e. knowledge and usage) of existing HIV prevention options, especially in resource-poor settings. Between January 2015 and October 2015, we reviewed scholarly and grey literatures to define treatment literacy and health literacy and assess the current need for literacy related to HIV prevention. The review included searches in electronic databases including MEDLINE, PsycINFO, PubMed, and Google Scholar. Permutations of the following search terms were used: "treatment literacy," "treatment education," "health literacy," and "prevention literacy." Through an iterative process of analyses and searches, titles and/or abstracts and reference lists of retrieved articles were reviewed for additional articles, and historical content analyses of grey literature and websites were additionally conducted. Treatment literacy was a well-established concept developed in the global South, which was later partially adopted by international agencies such as the World Health Organization. Treatment literacy emerged as more effective antiretroviral therapies became available. Developed from popular pedagogy and grassroots efforts during an intense struggle for treatment access, treatment literacy addressed the need to extend access to underserved communities and low-income settings that might otherwise be excluded from access. In contrast, prevention literacy is absent in the recent surge of new biomedical prevention strategies; prevention literacy was scarcely referenced and undertheorized in the available literature. Prevention efforts today include multimodal techniques, which jointly comprise a toolkit of biomedical, behavioural, and structural/environmental approaches. However, linkages to community advocacy and mobilization

  17. Electron scattering from tetrahydrofuran

    International Nuclear Information System (INIS)

    Fuss, M C; Sanz, A G; García, G; Muñoz, A; Oller, J C; Blanco, F; Do, T P T; Brunger, M J; Almeida, D; Limão-Vieira, P

    2012-01-01

    Electron scattering from Tetrahydrofuran (C 4 H 8 O) was investigated over a wide range of energies. Following a mixed experimental and theoretical approach, total scattering, elastic scattering and ionization cross sections as well as electron energy loss distributions were obtained.

  18. Electronically Controlled Resistor Bank

    Science.gov (United States)

    Ross, Walter L.

    1987-01-01

    Resistance quickly varied in small steps over wide range. Device with no moving parts provides variable electrical resistance. Used with analog or digital circuity to provide electronic selection of large number of resistance values for testing, simulation, control, or other purposes. Nearest electromechanical equivalent of all-electronic device is potentiometer driven by servomotor.

  19. Advances in Opto Electronics

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Advances in Opto Electronics. Optoelectronics is where electronics was 15 years back. All Optical Amplifiers and Semiconductor Amplifiers. Fastest Semiconductor (InP) switch is at 170GHz- where is terrabit ? MEMS based switches that route traffic at wavelength level ...

  20. Radiative electron capture

    International Nuclear Information System (INIS)

    Biggerstaff, J.A.; Appleton, B.R.; Datz, S.; Moak, C.D.; Neelavathi, V.N.; Noggle, T.S.; Ritchie, R.H.; VerBeek, H.

    1975-01-01

    Some data are presented for radiative electron capture by fast moving ions. The radiative electron capture spectrum is shown for O 8+ in Ag, along with the energy dependence of the capture cross-section. A discrepancy between earlier data, theoretical prediction, and the present data is pointed out. (3 figs) (U.S.)

  1. Physics and Electronics

    Science.gov (United States)

    2012-03-05

    Optoelectronics, Nanoelectronics, Terahertz Light Sources • Dr. Gernot Pomrenke •Multi-Modal Sensing • Dr. Kitt Reinhardt • GHz-THz Speed Electronics...systems & non-linear dynamics for counter DEW Complex electronics and fundamental quantum processes •new superconductors for power •non-linear

  2. Basic Electronics I.

    Science.gov (United States)

    Robertson, L. Paul

    Designed for use in basic electronics programs, this curriculum guide is comprised of twenty-nine units of instruction in five major content areas: Orientation, Basic Principles of Electricity/Electronics, Fundamentals of Direct Current, Fundamentals of Alternating Current, and Applying for a Job. Each instructional unit includes some or all of…

  3. Electron pairing without superconductivity

    Science.gov (United States)

    Levy, Jeremy

    Strontium titanate (SrTiO3) is the first and best known superconducting semiconductor. It exhibits an extremely low carrier density threshold for superconductivity, and possesses a phase diagram similar to that of high-temperature superconductors--two factors that suggest an unconventional pairing mechanism. Despite sustained interest for 50 years, direct experimental insight into the nature of electron pairing in SrTiO3 has remained elusive. Here we perform transport experiments with nanowire-based single-electron transistors at the interface between SrTiO3 and a thin layer of lanthanum aluminate, LaAlO3. Electrostatic gating reveals a series of two-electron conductance resonances--paired electron states--that bifurcate above a critical pairing field Bp of about 1-4 tesla, an order of magnitude larger than the superconducting critical magnetic field. For magnetic fields below Bp, these resonances are insensitive to the applied magnetic field; for fields in excess of Bp, the resonances exhibit a linear Zeeman-like energy splitting. Electron pairing is stable at temperatures as high as 900 millikelvin, well above the superconducting transition temperature (about 300 millikelvin). These experiments demonstrate the existence of a robust electronic phase in which electrons pair without forming a superconducting state. Key experimental signatures are captured by a model involving an attractive Hubbard interaction that describes real-space electron pairing as a precursor to superconductivity. Support from AFOSR, ONR, ARO, NSF, DOE and NSSEFF is gratefully acknowledged.

  4. Electron transfer in proteins

    DEFF Research Database (Denmark)

    Farver, O; Pecht, I

    1991-01-01

    Electron migration between and within proteins is one of the most prevalent forms of biological energy conversion processes. Electron transfer reactions take place between active centers such as transition metal ions or organic cofactors over considerable distances at fast rates and with remarkable...

  5. Electron tunneling in chemistry

    International Nuclear Information System (INIS)

    Zamaraev, K.I.; Khajrutdinov, R.F.; Zhdanov, V.P.; Molin, Yu.N.

    1985-01-01

    Results of experimental and theoretical investigations are outlined systematically on electron tunnelling in chemical reactions. Mechanism of electron transport to great distances is shown to be characteristic to chemical compounds of a wide range. The function of tunnel reactions is discussed for various fields of chemistry, including radiation chemistry, electrochemistry, chemistry of solids, chemistry of surface and catalysis

  6. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

  7. Recycling of electronic scrap

    DEFF Research Database (Denmark)

    Legarth, Jens Brøbech

    This Ph.D. thesis deals with the growingly important field of electronics recycling with special attention to the problem of printed circuit board recycling. A literature survey of contemporary electronics recycling and printed circuit board recycling is presented.Further, an analysis of the role...

  8. Managing electronic records

    CERN Document Server

    McLeod, Julie

    2005-01-01

    For records management courses, this book covers the theory and practice of managing electronic records as business and information assets. It focuses on the strategies, systems and procedures necessary to ensure that electronic records are appropriately created, captured, organized and retained over time to meet business and legal requirements.

  9. Electron scattering violates parity

    CERN Multimedia

    2004-01-01

    Parity violation has been observed in collisions between electrons at the Stanford Linear Accelerator Center (SLAC) in the US. The resuls, which are in agreement with the Stanford Model of particle physics, also provide a new measurement of the weak charge of the electron (½ page)

  10. Electrons in Molecules

    Indian Academy of Sciences (India)

    “What are electrons doing in molecules?” This is a deceptively simple question that scientists have been trying to answer for more than eighty years. With the advent of quantum mechanics in 1926, it became clear that we must understand the dynamics of electronic motion in atoms, molecules and solids in order to explain ...

  11. INDRA. Electronic Architecture

    International Nuclear Information System (INIS)

    Ganil Team.

    1993-01-01

    The INDRA multidetector electronics is described. The system is a set of 17 rings consisting of 96 ionization chambers and 180 silicon detectors plus 324 cesium iodide and 12 Phoswich scintillators. Their integrated electronic lines, the trigger modules, the control and data acquisition units are presented briefly. (R.P.) 6 figs

  12. Practical electronics for inventors

    CERN Document Server

    Scherz, Paul

    2013-01-01

    Spark your creativity and gain the electronics skills required to transform your innovative ideas into functioning gadgets. This hands-on, updated guide outlines electrical principles and provides thorough, easy-to-follow instructions, schematics, and illustrations. Findout how to select components, safely assemble circuits, perform error tests, and build plug-and-play prototypes. Practical Electronics for Inventors, Third Edition, features all-new chapters on sensors, microcontrollers, modular electronics, and the latest software tools. Coverage includes: Resistors, capacitors, inductors, and transformers Diodes, transistors, and integrated circuits Optoelectronics, solar cells, and phototransistors Sensors, GPS modules, and touch screens Op amps, regulators, and power supplies Digital electronics, LCD displays, and logic gates Microcontrollers and prototyping platforms, including Arduino DC motors, RC servos, and stepper motors Microphones, audio amps, and speakers Modular electronics and prototyping.

  13. The Hydrated Electron

    Science.gov (United States)

    Herbert, John M.; Coons, Marc P.

    2017-05-01

    Existence of a hydrated electron as a byproduct of water radiolysis was established more than 50 years ago, yet this species continues to attract significant attention due to its role in radiation chemistry, including DNA damage, and because questions persist regarding its detailed structure. This work provides an overview of what is known in regards to the structure and spectroscopy of the hydrated electron, both in liquid water and in clusters [Formula: see text], the latter of which provide model systems for how water networks accommodate an excess electron. In clusters, the existence of both surface-bound and internally bound states of the excess electron has elicited much debate, whereas in bulk water there are questions regarding how best to understand the structure of the excess electron's spin density. The energetics of the equilibrium species e-(aq) and its excited states, in bulk water and at the air/water interface, are also addressed.

  14. Runaway electrons and magnetic island confinement

    Science.gov (United States)

    Boozer, Allen H.

    2016-08-01

    The breakup of magnetic surfaces is a central feature of ITER planning for the avoidance of damage due to runaway electrons. Rapid thermal quenches, which lead to large accelerating voltages, are thought to be due to magnetic surface breakup. Impurity injection to avoid and to mitigate both halo and runaway electron currents utilizes massive gas injection or shattered pellets. The actual deposition is away from the plasma center, and the breakup of magnetic surfaces is thought to spread the effects of the impurities across the plasma cross section. The breakup of magnetic surfaces would prevent runaway electrons from reaching relativistic energies were it not for the persistence of non-intercepting flux tubes. These are tubes of magnetic field lines that do not intercept the walls. In simulations and in magnetic field models, non-intercepting flux tubes are found to persist near the magnetic axis and in the cores of magnetic islands even when a large scale magnetic surface breakup occurs. As long as a few magnetic surfaces reform before all of the non-intercepting flux tubes dissipate, energetic electrons confined and accelerated in these flux tubes can serve as the seed electrons for a transfer of the overall plasma current from thermal to relativistic carriers. The acceleration of electrons is particularly strong because of the sudden changes in the poloidal flux that naturally occur in a rapid magnetic relaxation. The physics of magnetic islands as non-intercepting flux tubes is studied. Expressions are derived for (1) the size of islands required to confine energetic runaway electrons, (2) the accelerating electric field in an island, (3) the increase or reduction in the size of an island by the runaway electron current, (4) the approximate magnitude of the runaway current in an island, and (5) the time scale for the evolution of an island.

  15. Let's prevent diabetes

    DEFF Research Database (Denmark)

    Gray, Laura J.; Khunti, Kamlesh; Williams, Sian

    2012-01-01

    Background: The prevention of type 2 diabetes is a globally recognised health care priority, but there is a lack of rigorous research investigating optimal methods of translating diabetes prevention programmes, based on the promotion of a healthy lifestyle, into routine primary care. The aim...... of the study is to establish whether a pragmatic structured education programme targeting lifestyle and behaviour change in conjunction with motivational maintenance via the telephone can reduce the incidence of type 2 diabetes in people with impaired glucose regulation (a composite of impaired glucose...... of type 2 diabetes. Secondary outcomes include changes in HbA1c, blood glucose levels, cardiovascular risk, the presence of the Metabolic Syndrome and the cost-effectiveness of the intervention.Methods: The study consists of screening and intervention phases within 44 general practices coordinated from...

  16. [Anxiety prevention among schoolchildren].

    Science.gov (United States)

    Essau, C A; Conradt, J; Ederer, E M

    2004-09-01

    The FRIENDS programme is a prevention and early intervention programme, which teaches children strategies to cope with anxiety and challenging situations. This paper examines the social validity of the German version of the FRIENDS programme using data from a large-scale study on the prevention of anxiety disorders in schoolchildren, which is funded by the Dr. Karl-Wilder Stiftung. In this paper, data of 208 schoolchildren (aged 9 to 12 years) are used. Results show that the children and their parents were highly satisfied with the FRIENDS programme. Childrens attendance and completion of their homework assignments were very high. Both the children and their parents rated relaxation exercises and thinking helpful thoughts as being more useful for the children than other skills. Treatment acceptability correlated significantly with the childrens clinical outcome. The implications of our findings for future research are discussed.

  17. Preventive Radiation Protection Act

    International Nuclear Information System (INIS)

    Roewer, H.

    1988-01-01

    The commentary is intended to contribute to protection of the population by a practice-oriented discussion and explanation of questions arising in connection with the Preventive Radiation Protection Act. Leaving aside discussions about abandonment of nuclear power, or criticism from any legal point of view, the commentary adopts the practical approach that accepts, and tries to help implementing, the act as it is. It is a guide for readers who are not experts in the law and gives a line of orientation by means of explanations and sometimes by citations from other acts (in footnotes). The commentary also presents the EURATOM Directive No. 3954/87 dated 22 December 1987, the EC Directive No. 3955/87 dated 22 December 1987, and the EC Directive No. 1983/88 dated 5 July 1988. A tabular survey shows the system of duties and competences defined by the Preventive Radiation Protection Act. (RST) [de

  18. [Prevention of diabetic foot].

    Science.gov (United States)

    Metelko, Zeljko; Brkljacić Crkvencić, Neva

    2013-10-01

    Diabetic foot (DF) is the most common chronic complication, which depends mostly on the duration and successful treatment of diabetes mellitus. Based on epidemiological studies, it is estimated that 25% of persons with diabetes mellitus (PwDM) will develop the problems with DF during lifetime, while 5% do 15% will be treated for foot or leg amputation. The treatment is prolonged and expensive, while the results are uncertain. The changes in DF are influenced by different factors usually connected with the duration and regulation of diabetes mellitus. The first problems with DF are the result of misbalance between nutritional, defensive and reparatory mechanisms on the one hand and the intensity of damaging factors against DF on the other hand. Diabetes mellitus is a state of chronic hyperglycemia, consisting of changes in carbohydrate, protein and fat metabolism. As a consequence of the long duration of diabetes mellitus, late complications can develop. Foot is in its structure very complex, combined with many large and small bones connected with ligaments, directed by many small and large muscles, interconnected with many small and large blood vessels and nerves. Every of these structures can be changed by nutritional, defensive and reparatory mechanisms with consequential DE Primary prevention of DF includes all measures involved in appropriate maintenance of nutrition, defense and reparatory mechanisms.First, it is necessary to identify the high-risk population for DF, in particular for macrovascular, microvascular and neural complications. The high-risk population of PwDM should be identified during regular examination and appropriate education should be performed. In this group, it is necessary to include more frequent and intensified empowerment for lifestyle changes, appropriate diet, regular exercise (including frequent breaks for short exercise during sedentary work), regular self control of body weight, quit smoking, and appropriate treatment of glycemia

  19. Prevention of preeclampsia.

    Science.gov (United States)

    Grotegut, Chad A

    2016-12-01

    Preeclampsia is a common complication of pregnancy that is associated with an increased risk of maternal and neonatal morbidity and mortality. Currently, delivery is the only cure for preeclampsia; therefore, effective prevention and treatment options for this condition are sorely needed. In the current issue of the JCI, Mirzakhani et al. report the findings of the Vitamin D Antenatal Asthma Reduction Trial (VDAART), a well-conducted large, randomized, double-blind, placebo-controlled trial of vitamin D supplementation for the prevention of preeclampsia. Though vitamin D supplementation had no effect on the risk of preeclampsia, reduced maternal serum vitamin D levels did correlate with preeclampsia risk. Mirzakhani and colleagues identified a number of gene pathways that are differentially regulated among women with low serum vitamin D levels who develop preeclampsia. These results indicate that further research on the role of vitamin D in preeclampsia is warranted.

  20. The Prevention of Thalassemia

    Science.gov (United States)

    Cao, Antonio; Kan, Yuet Wai

    2013-01-01

    The thalassemias are among the most common inherited diseases worldwide, affecting individuals originating from the Mediterranean area, Middle East, Transcaucasia, Central Asia, Indian subcontinent, and Southeast Asia. As the diseases require long-term care, prevention of the homozygous state constitutes a major armament in the management. This article discusses the major prevention programs that are set up in many countries in Europe, Asia, and Australia, often drawing from the experience in Sardinia. These comprehensive programs involve carrier detections, molecular diagnostics, genetic counseling, and prenatal diagnosis. Variability of clinical severity can be attributable to interactions with α-thalassemia and mutations that increase fetal productions. Special methods taht are currently quite expensive and not widely applicable are preimplantation and preconception diagnosis. The recent successful studies of fetal DNA in maternal plasma may allow future prenatal diagnosis that is noninvasive for the fetus. PMID:23378598

  1. Teleophthalmology in preventive medicine

    CERN Document Server

    Michelson, Georg

    2014-01-01

    This book provides an up-to-date overview of the clinical applications, methods, and technologies of teleophthalmology within the field of preventive medicine. The ability of novel methods to detect the initial signs of neurodegenerative diseases on the basis of alterations in the retina is reviewed, and detailed attention is paid to the role of teleophthalmology in screening for vision-threatening diseases such as diabetic retinopathy, glaucoma, and age-related macular degeneration. A major part of the book is devoted to novel imaging methods and the latest information technologies, including advanced mobile communication and Web 2.0 applications in teleophthalmology. In addition, the initial projects of an interdisciplinary cooperation in preventive medicine are described. All of the authors are experienced in the scientific and practical aspects of teleophthalmology, including e-learning, and have produced a book that will meet the needs of all medical care providers interested in using teleophthalmology.

  2. Cancer prevention by phytochemicals.

    Science.gov (United States)

    Nishino, Hoyoku; Murakoshi, Michiaki; Mou, Xiao Yang; Wada, Saeri; Masuda, Mitsuharu; Ohsaka, Yasuhito; Satomi, Yoshiko; Jinno, Kenji

    2005-01-01

    Information has been accumulated indicating that diets rich in vegetables and fruits can reduce the risk of a number of chronic diseases, including cancer, cardiovascular disease, diabetes and age-related macular degeneration. Phytochemicals (various factors in plant foods), such as carotenoids, antioxidative vitamins, phenolic compounds, terpenoids, steroids, indoles and fibers, have been considered responsible for the risk reduction. Among them, a mixture of natural carotenoids has been studied extensively and proven to show beneficial effects on human cancer prevention.

  3. Models for effective prevention.

    Science.gov (United States)

    Perry, C L; Kelder, S H

    1992-07-01

    The social influence models do provide some optimism for primary prevention efforts. Prevention programs appear most effective when 1) the target behavior of the intervention has received increasing societal disapproval (such as cigarette smoking), 2) multiple years of behavioral health education are planned, and 3) community-wide involvement or mass media complement a school-based peer-led program (45,46). Short-term programs and those involving alcohol use have had less favorable outcomes. Future research in primary prevention should address concerns of high-risk groups and high-risk countries, such as lower income populations in the United States or countries that have large adolescent homeless populations. The utilization of adolescent leaders for program dissemination might be particularly critical in these settings. A second major and global concern should focus upon alcohol use and alcohol-related problems. In many communities adolescent alcohol use is normative and even adult supported. Thus, young people are getting quite inconsistent messages on alcohol from their schools, from TV, from peers, and from parents. This inconsistency may translate into many tragic and avoidable deaths for young people. Clearly, in the area of alcohol-related problems, community-wide involvement may be necessary. A third direction for prevention research should involve issues of norms, access, and enforcement including policy interventions, such as involve the availability of cigarette vending machines or the ease of under-age buying or levels of taxation. These methods affect adolescents more acutely since their financial resources, for the most part, are more limited. These policy level methods also signify to adolescents what adults consider appropriate.(ABSTRACT TRUNCATED AT 250 WORDS)

  4. Culturally Relevant Cyberbullying Prevention

    OpenAIRE

    Phillips, Gregory John

    2017-01-01

    In this action research study, I, along with a student intervention committee of 14 members, developed a cyberbullying intervention for a large urban high school on the west coast. This high school contained a predominantly African American student population. I aimed to discover culturally relevant cyberbullying prevention strategies for African American students. The intervention committee selected video safety messages featuring African American actors as the most culturally relevant cyber...

  5. Prevention of criticality accidents

    International Nuclear Information System (INIS)

    Canavese, S.I.

    1982-01-01

    These notes used in the postgraduate course on Radiological Protection and Nuclear Safety discuss macro-and microscopic nuclear constants for fissile materials systems. Critical systems: their definition; criteria to analyze the critical state; determination of the critical size; analysis of practical problems about prevention of criticality. Safety of isolated units and of sets of units. Application of standards. Conception of facilities from the criticality control view point. (author) [es

  6. Experimental studies of stable confined electron clouds using Gabor lenses

    CERN Document Server

    Meusel, O.; Glaeser, B.; Schulte, K.

    2013-04-22

    Based on the idea of D. Gabor [1] space charge lenses are under investigation to be a powerful focussing device for intense ion beams. A stable confined electron column is used to provide strong radially symmetric electrostatic focussing, e.g. for positively charged ion beams. The advantages of Gabor lenses are a mass independent focussing strength, space charge compensation of the ion beam and reduced magnetic or electric fields compared to conventional focussing devices. Collective phenomena of the electron cloud result in aberrations and emittance growth of the ion beam. The knowledge of the behaviour of the electron cloud prevents a decrease of the beam brilliance. Numerical models developed to describe the electron confinement and dynamics within a Gabor lens help to understand the interaction of the ion beam with the electron column and show the causes of non-neutral plasma instabilities. The diagnosis of the electron cloud properties helps to evaluate the numerical models and to investigate the influen...

  7. Prevention of malignant neoplasms

    Directory of Open Access Journals (Sweden)

    D. G. Zaridze

    2017-01-01

    Full Text Available Research in causation of cancer is an important part of cancer research in general and is an essential prerequisite for cancer prevention. The effective primary prevention is not visible without evidence based knowledge in the causation of cancer in humans.There is sufficient evidence that certain life style and environment factors cause cancer in humans. These factors include: smoking and other types of tobacco consumption, overweight and obesity, lack of physical activity, diet rich in processed meat and poor in vegetables and fruits, certain types of viral and bacterial infection, ultraviolet radiation, ionizing radiation, ambient air pollution, carcinogens at workplace, exogenous hormones.Cancer mortality is decreasing in majority of developed countries, including Russia. This mortality trend is mostly due to decrease in incidence and death rates of lung and other smoking related cancers and is caused by decline in smoking prevalence and change in tar content of cigarette smoke.In Russia trend in mortality from all cancers is as well determined by decrease in incidence and mortality from gastric cancer, which is due to decline in prevalence of Helicobacter pylori infection and improvement of diet, increase in consumption of fruits and vegetables. Thus the decline in cancer mortality is mostly the result of primary prevention which is the most effective avenue of cancer control. 

  8. The prevention of dementia.

    Science.gov (United States)

    Peters, Ruth

    2009-05-01

    Dementia is prevalent in older adults and the population is ageing. Many factors have been associated with dementia and anything that may aid the prevention of dementia is of importance. The literature in this area was evaluated and information relating to the various factors that may impact upon the prevention of dementia is presented below. Factors that have been associated with a possible increased risk of developing dementia include high blood pressure, (at least in midlife), high body mass index, smoking and possibly diabetes although the evidence is mixed. There is currently no clear evidence with regard to cholesterol and metabolic syndrome although both may be implicated. Having education and maintaining a Mediterranean diet, including vegetable, fruit and fish intake, have been linked to a lower incidence of dementia as has low to moderate alcohol intake. Although care must be taken with the latter given the different characteristics of the studies reporting on alcohol and dementia. It may be that risk and protective factors vary with age, however, in the absence of prophylactic treatment it seems likely that the maintenance of a healthy lifestyle may represent the best option with regard to the prevention of dementia. (c) 2008 John Wiley & Sons, Ltd.

  9. Osteoradionecrosis prevention myths

    International Nuclear Information System (INIS)

    Wahl, Michael J.

    2006-01-01

    Purpose: To critically analyze controversial osteoradionecrosis (ORN) prevention techniques, including preradiation extractions of healthy or restorable teeth and the use of prophylactic antibiotics or hyperbaric oxygen (HBO) treatments for preradiation and postradiation extractions. Methods: The author reviewed ORN studies found on PubMed and in other article references, including studies on overall ORN incidence and pre- and postradiation incidence, with and without prophylactic HBO or antibiotics. Results: Owing in part to more efficient radiation techniques, the incidence of ORN has been declining in radiation patients over the last 2 decades, but the prevention of ORN remains controversial. A review of the available literature does not support the preradiation extraction of restorable or healthy teeth. There is also insufficient evidence to support the use of prophylactic HBO treatments or prophylactic antibiotics before extractions or other oral surgical procedures in radiation patients. Conclusions: To prevent ORN, irradiated dental patients should maintain a high level of oral health. A preradiation referral for a dental evaluation and close collaboration by a multidisciplinary team can be invaluable for radiation patients. As with most other dental patients, restorable and healthy teeth should be retained in irradiated patients. The use of prophylactic HBO or antibiotics should be reconsidered for preradiation and postradiation extractions

  10. Guidelines for prevention in psychology.

    Science.gov (United States)

    2014-04-01

    The effectiveness of prevention to enhance human functioning and reduce psychological distress has been demonstrated. From infancy through adulthood, access to preventive services and interventions is important to improve the quality of life and human functioning and reduce illness and premature death. The importance of prevention is consistent with the Patient Protection and Affordable Care Act of 2010. Even with the increased focus on prevention, psychology training programs rarely require specific courses on prevention. In particular, conceptualizations about best practices in prevention, particularly at the environmental level, are lacking. Therefore, psychologists engaged in prevention can benefit from a set of guidelines that address and inform prevention practices. Accordingly, the Guidelines for Prevention in Psychology are intended to "inform psychologists, the public, and other interested parties regarding desirable professional practices" in prevention. The Prevention Guidelines are recommended based on their potential benefits to the public and the professional practice of psychology. They support prevention as an important area of practice, research, and training for psychologists. The Guidelines give increased attention to prevention within APA, encouraging psychologists to become involved with preventive activities relevant to their area of practice. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

  11. 78 FR 13366 - Information Collection Request: Technical Resource for Incident Prevention (TRIPwire) User...

    Science.gov (United States)

    2013-02-27

    ...: Technical Resource for Incident Prevention (TRIPwire) User Registration AGENCY: National Protection and..., e.g., permitting electronic submissions of responses. SUPPLEMENTARY INFORMATION: The Technical..., citizenship, job title, employer name, professional address and contact information, as well as an Employment...

  12. Preventing congenital toxoplasmosis.

    Science.gov (United States)

    Lopez, A; Dietz, V J; Wilson, M; Navin, T R; Jones, J L

    2000-03-31

    Toxoplasmosis is caused by infection with the protozoan parasite Toxoplasma gondii. Acute infections in pregnant women can be transmitted to the fetus and cause severe illness (e.g., mental retardation, blindness, and epilepsy). An estimated 400-4,000 cases of congenital toxoplasmosis occur each year in the United States. Of the 750 deaths attributed to toxoplasmosis each year, 375 (50%) are believed to be caused by eating contaminated meat, making toxoplasmosis the third leading cause of foodborne deaths in this country. Toxoplasma can be transmitted to humans by three principal routes: a) ingestion of raw or inadequately cooked infected meat; b) ingestion of oocysts, an environmentally resistant form of the organism that cats pass in their feces, with exposure of humans occurring through exposure to cat litter or soil (e.g., from gardening or unwashed fruits or vegetables); and c) a newly infected pregnant woman passing the infection to her unborn fetus. RECOMMENDATIONSFOR PREVENTION: Toxoplasma infection can be prevented in large part by a) cooking meat to a safe temperature (i.e., one sufficient to kill Toxoplasma); b) peeling or thoroughly washing fruits and vegetables before eating; c) cleaning cooking surfaces and utensils afterthey have contacted raw meat, poultry, seafood, or unwashed fruits or vegetables; d) pregnant women avoiding changing cat litter or, if no one else is available to change the cat litter, using gloves, then washing hands thoroughly; and e) not feeding raw or undercooked meat to cats and keeping cats inside to prevent acquisition of Toxoplasma by eating infected prey. Priorities for research were discussed at a national workshop sponsored by CDC in September 1998 and include a) improving estimates of the burden of toxoplasmosis, b) improving diagnostic tests to determine when a person becomes infected with Toxoplasma, and c) determining the applicability of national screening programs. Many cases of congenital toxoplasmosis can be

  13. Electronically cloaked nanoparticles

    Science.gov (United States)

    Shen, Wenqing

    The concept of electronic cloaking is to design objects invisible to conduction electrons. The approach of electronic cloaking has been recently suggested to design invisible nanoparticle dopants with electronic scattering cross section smaller than 1% of the physical cross section (pi a2), and therefore to enhance the carrier mobility of bulk materials. The proposed nanoparticles have core-shell structures. The dopants are incorporated inside the core, while the shell layer serves both as a spacer to separate the charge carriers from their parent atoms and as a cloaking shell to minimize the scattering cross section of the electrons from the ionized nanoparticles. Thermoelectric materials are usually highly doped to have enough carrier density. Using invisible dopants could achieve larger thermoelectric power factors by enhancing the electronic mobility. Core-shell nanoparticles show an advantage over one-layer nanoparticles, which are proposed in three-dimensional modulation doping. However designing such nanoparticles is not easy as there are too many parameters to be considered. This thesis first shows an approach to design hollow nanoparticles by applying constrains on variables. In the second part, a simple mapping approach is introduced where one can identify possible core-shell particles by comparing the dimensionless parameters of chosen materials with provided maps. In both parts of this work, several designs with realistic materials were made and proven to achieve electronic cloaking. Improvement in the thermoelectric power factor compared to the traditional impurity doping method was demonstrated in several cases.

  14. Coherent electron cooling

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko,V.

    2009-05-04

    Cooling intense high-energy hadron beams remains a major challenge in modern accelerator physics. Synchrotron radiation is still too feeble, while the efficiency of two other cooling methods, stochastic and electron, falls rapidly either at high bunch intensities (i.e. stochastic of protons) or at high energies (e-cooling). In this talk a specific scheme of a unique cooling technique, Coherent Electron Cooling, will be discussed. The idea of coherent electron cooling using electron beam instabilities was suggested by Derbenev in the early 1980s, but the scheme presented in this talk, with cooling times under an hour for 7 TeV protons in the LHC, would be possible only with present-day accelerator technology. This talk will discuss the principles and the main limitations of the Coherent Electron Cooling process. The talk will describe the main system components, based on a high-gain free electron laser driven by an energy recovery linac, and will present some numerical examples for ions and protons in RHIC and the LHC and for electron-hadron options for these colliders. BNL plans a demonstration of the idea in the near future.

  15. Dose calculation for electrons

    International Nuclear Information System (INIS)

    Hirayama, Hideo

    1995-01-01

    The joint working group of ICRP/ICRU is advancing the works of reviewing the ICRP publication 51 by investigating the data related to radiation protection. In order to introduce the 1990 recommendation, it has been demanded to carry out calculation for neutrons, photons and electrons. As for electrons, EURADOS WG4 (Numerical Dosimetry) rearranged the data to be calculated at the meeting held in PTB Braunschweig in June, 1992, and the question and request were presented by Dr. J.L. Chartier, the responsible person, to the researchers who are likely to undertake electron transport Monte Carlo calculation. The author also has carried out the requested calculation as it was the good chance to do the mutual comparison among various computation codes regarding electron transport calculation. The content that the WG requested to calculate was the absorbed dose at depth d mm when parallel electron beam enters at angle α into flat plate phantoms of PMMA, water and ICRU4-element tissue, which were placed in vacuum. The calculation was carried out by the versatile electron-photon shower computation Monte Carlo code, EGS4. As the results, depth dose curves and the dependence of absorbed dose on electron energy, incident angle and material are reported. The subjects to be investigated are pointed out. (K.I.)

  16. Electron Cooling of RHIC

    International Nuclear Information System (INIS)

    Ben-Zvi, I.; Barton, D.S.; Beavis, D.B.; Blaskiewicz, M.; Brennan, J.M.; Burrill, A.; Calaga, R.; Cameron, P.; Chang, X.Y.; Connolly, R.; Eidelman, Yu.I.; Fedotov, A.V.; Fischer, W.; Gassner, D.M.; Hahn, H.; Harrison, M.; Hershcovitch, A.; Hseuh, H.-C.; Jain, A.K.; Johnson, P.D.J.; Kayran, D.; Kewisch, J.; Lambiase, R.F.; Litvinenko, V.; MacKay, W.W.; Mahler, G.J.; Malitsky, N.; McIntyre, G.T.; Meng, W.; Mirabella, K.A.M.; Montag, C.; Nehring, T.C.N.; Nicoletti, T.; Oerter, B.; Parzen, G.; Pate, D.; Rank, J.; Rao, T.; Roser, T.; Russo, T.; Scaduto, J.; Smith, K.; Trbojevic, D.; Wang, G.; Wei, J.; Williams, N.W.W.; Wu, K.-C.; Yakimenko, V.; Zaltsman, A.; Zhao, Y.; Abell, D.T.; Bruhwiler, D.L.; Bluem, H.; Burger, A.; Cole, M.D.; Favale, A.J.; Holmes, D.; Rathke, J.; Schultheiss, T.; Todd, A.M.M.; Burov, A.V.; Nagaitsev, S.; Delayen, J.R.; Derbenev, Y.S.; Funk, L. W.; Kneisel, P.; Merminga, L.; Phillips, H.L.; Preble, J.P.; Koop, I.; Parkhomchuk, V.V.; Shatunov, Y.M.; Skrinsky, A.N.; Koop, I.; Parkhomchuk, V.V.; Shatunov, Y.M.; Skrinsky, A.N.; Sekutowicz, J.S.

    2005-01-01

    We report progress on the R and D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R and D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.agsrhichome.bnl.gov/eCool/

  17. Electron Cooling of RHIC

    Energy Technology Data Exchange (ETDEWEB)

    I. Ben-Zvi; D.S. Barton; D.B. Beavis; M. Blaskiewicz; J.M. Brennan; A. Burrill; R. Calaga; P. Cameron; X.Y. Chang; R. Connolly; Yu.I. Eidelman; A.V. Fedotov; W. Fischer; D.M. Gassner; H. Hahn; M. Harrison; A. Hershcovitch; H.-C. Hseuh; A.K. Jain; P.D.J. Johnson; D. Kayran; J. Kewisch; R.F. Lambiase; V. Litvinenko; W.W. MacKay; G.J. Mahler; N. Malitsky; G.T. McIntyre; W. Meng; K.A.M. Mirabella; C. Montag; T.C.N. Nehring; T. Nicoletti; B. Oerter; G. Parzen; D. Pate; J. Rank; T. Rao; T. Roser; T. Russo; J. Scaduto; K. Smith; D. Trbojevic; G. Wang; J. Wei; N.W.W. Williams; K.-C. Wu; V. Yakimenko; A. Zaltsman; Y. Zhao; D.T. Abell; D.L. Bruhwiler; H. Bluem; A. Burger; M.D. Cole; A.J. Favale; D. Holmes; J. Rathke; T. Schultheiss; A.M.M. Todd; A.V. Burov; S. Nagaitsev; J.R. Delayen; Y.S. Derbenev; L. W. Funk; P. Kneisel; L. Merminga; H.L. Phillips; J.P. Preble; I. Koop; V.V. Parkhomchuk; Y.M. Shatunov; A.N. Skrinsky; I. Koop; V.V. Parkhomchuk; Y.M. Shatunov; A.N. Skrinsky; J.S. Sekutowicz

    2005-05-16

    We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.agsrhichome.bnl.gov/eCool/.

  18. Electron Cooling of RHIC

    CERN Document Server

    Ben-Zvi, Ilan; Barton, Donald; Beavis, Dana; Blaskiewicz, Michael; Bluem, Hans; Brennan, Joseph M; Bruhwiler, David L; Burger, Al; Burov, Alexey; Burrill, Andrew; Calaga, Rama; Cameron, Peter; Chang, Xiangyun; Cole, Michael; Connolly, Roger; Delayen, Jean R; Derbenev, Yaroslav S; Eidelman, Yury I; Favale, Anthony; Fedotov, Alexei V; Fischer, Wolfram; Funk, L W; Gassner, David M; Hahn, Harald; Harrison, Michael; Hershcovitch, Ady; Holmes, Douglas; Hseuh Hsiao Chaun; Johnson, Peter; Kayran, Dmitry; Kewisch, Jorg; Kneisel, Peter; Koop, Ivan; Lambiase, Robert; Litvinenko, Vladimir N; MacKay, William W; Mahler, George; Malitsky, Nikolay; McIntyre, Gary; Meng, Wuzheng; Merminga, Lia; Meshkov, Igor; Mirabella, Kerry; Montag, Christoph; Nagaitsev, Sergei; Nehring, Thomas; Nicoletti, Tony; Oerter, Brian; Parkhomchuk, Vasily; Parzen, George; Pate, David; Phillips, Larry; Preble, Joseph P; Rank, Jim; Rao, Triveni; Rathke, John; Roser, Thomas; Russo, Thomas; Scaduto, Joseph; Schultheiss, Tom; Sekutowicz, Jacek; Shatunov, Yuri; Sidorin, Anatoly O; Skrinsky, Aleksander Nikolayevich; Smirnov, Alexander V; Smith, Kevin T; Todd, Alan M M; Trbojevic, Dejan; Troubnikov, Grigory; Wang, Gang; Wei, Jie; Williams, Neville; Wu, Kuo-Chen; Yakimenko, Vitaly; Zaltsman, Alex; Zhao, Yongxiang; ain, Animesh K

    2005-01-01

    We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.ags...

  19. Development of Preventive Measures to Prevent School Absenteeism in Twente

    NARCIS (Netherlands)

    Van Liere, Annette; Ritzen, Henk; Brand-Gruwel, Saskia

    2011-01-01

    Van Liere, A., Ritzen, H., & Brand-Gruwel, S. (2011, August). Development of Preventive Measures to Prevent School Absenteeism in Twente. Paper presented at 14th Biennial Conference for Research on Learning and Instruction of EARLI, Exeter, England.

  20. Electronic monitoring of patients with bipolar affective disorder

    DEFF Research Database (Denmark)

    Jacoby, Anne Sophie; Faurholt-Jepsen, Maria; Vinberg, Maj

    2012-01-01

    Bipolar disorder is a great challenge to patients, relatives and clinicians, and there is a need for development of new methods to identify prodromal symptoms of affective episodes in order to provide efficient preventive medical and behavioural intervention. Clinical trials prove that electronic...... monitoring is a feasible, valid and acceptable method. Hence it is recommended, that controlled trials on the effect of electronic monitoring on patients' course of illness, level of function and quality of life are conducted....

  1. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1968-01-01

    Electronic Devices and Circuits, Volume 1 deals with the design and applications of electronic devices and circuits such as passive components, diodes, triodes and transistors, rectification and power supplies, amplifying circuits, electronic instruments, and oscillators. These topics are supported with introductory network theory and physics. This volume is comprised of nine chapters and begins by explaining the operation of resistive, inductive, and capacitive elements in direct and alternating current circuits. The theory for some of the expressions quoted in later chapters is presented. Th

  2. Microscopy with slow electrons

    International Nuclear Information System (INIS)

    Frank, L.; Muellerova, I.; Delong, A.

    1994-01-01

    Low energy microscopy is treated as the low energy limit of electron microscopy as a whole in all its basic branches, i.e., the emission, transmission and scanning microscopy. The instrumental and methodological aspects are briefly discussed. They include the interaction of electrons with a solid, the contrast formation mechanisms, the instrumentation problems, and actual progress achieved in all three types of microscopy from the point of view of lowering the energy of electrons, impacting or leaving the specimen, down to the low energy range below 5 keV and the very low energy range below 50 eV. (author) 62 refs., 27 figs., 3 tabs

  3. Semiconductor opto-electronics

    CERN Document Server

    Moss, TS; Ellis, B

    1972-01-01

    Semiconductor Opto-Electronics focuses on opto-electronics, covering the basic physical phenomena and device behavior that arise from the interaction between electromagnetic radiation and electrons in a solid. The first nine chapters of this book are devoted to theoretical topics, discussing the interaction of electromagnetic waves with solids, dispersion theory and absorption processes, magneto-optical effects, and non-linear phenomena. Theories of photo-effects and photo-detectors are treated in detail, including the theories of radiation generation and the behavior of semiconductor lasers a

  4. Free-electron lasers

    International Nuclear Information System (INIS)

    Brau, C.A.

    1990-01-01

    Free-electron lasers represent an altogether new and exciting class of coherent optical sources. Making use of a simple and elegant gain medium - an electron beam in a magnetic field - they have already demonstrated broad wavelength tunability and excellent optical-beam quality. For the future they offer the possibility of generating the greatest focused power ever achieved by a laser. But even before this is achieved, the unique advantages of free-electron lasers, especially their tunability, will make them useful for a variety of important applications in science, medicine, and industry. (author)

  5. Consulting in Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Florentina Loredana Tache

    2010-10-01

    Full Text Available Economic development of electronic services provide advice and many agents of existingreferral systems to recommend and provide products, information and customized views of thecommunity through a personalized interaction in real time. Distributed systems of autonomous agentsare becoming increasingly important in electronic comet because the basic decisions of agents adviceon trust and reputation are taken in a similar way human society. If these decisions will be as a realconsumer protection, when new aspects of online consumer legislation will become usefulinformation in advice and consulting of electronic commerce.

  6. Electronic components and systems

    CERN Document Server

    Dennis, W H

    2013-01-01

    Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to kn

  7. Principles of quantum electronics

    CERN Document Server

    Marcuse, Dietrich

    1980-01-01

    Principles of Quantum Electronics focuses on the concept of quantum electronics as the application of quantum theory to engineering problems. It examines the principles that govern specific quantum electronics devices and presents their theoretical applications to typical problems. Comprised of 10 chapters, this book starts with an overview of the Dirac formulation of quantum mechanics. This text then considers the derivation of the formalism of field quantization and discusses the properties of photons and phonons. Other chapters examine the interaction between the electromagnetic field and c

  8. Electron paramagnetic resonance

    CERN Document Server

    Al'tshuler, S A

    2013-01-01

    Electron Paramagnetic Resonance is a comprehensive text on the field of electron paramagnetic resonance, covering both the theoretical background and the results of experiment. This book is composed of eight chapters that cover theoretical materials and experimental data on ionic crystals, since these are the materials that have been most extensively studied by the methods of paramagnetic resonance. The opening chapters provide an introduction to the basic principles of electron paramagnetic resonance and the methods of its measurement. The next chapters are devoted to the theory of spectra an

  9. Polarized electron sources

    Energy Technology Data Exchange (ETDEWEB)

    Prepost, R. [Univ. of Wisconsin, Madison, WI (United States)

    1994-12-01

    The fundamentals of polarized electron sources are described with particular application to the Stanford Linear Accelerator Center. The SLAC polarized electron source is based on the principle of polarized photoemission from Gallium Arsenide. Recent developments using epitaxially grown, strained Gallium Arsenide cathodes have made it possible to obtain electron polarization significantly in excess of the conventional 50% polarization limit. The basic principles for Gallium and Arsenide polarized photoemitters are reviewed, and the extension of the basic technique to strained cathode structures is described. Results from laboratory measurements of strained photocathodes as well as operational results from the SLAC polarized source are presented.

  10. VLSI electronics microstructure science

    CERN Document Server

    1982-01-01

    VLSI Electronics: Microstructure Science, Volume 4 reviews trends for the future of very large scale integration (VLSI) electronics and the scientific base that supports its development.This book discusses the silicon-on-insulator for VLSI and VHSIC, X-ray lithography, and transient response of electron transport in GaAs using the Monte Carlo method. The technology and manufacturing of high-density magnetic-bubble memories, metallic superlattices, challenge of education for VLSI, and impact of VLSI on medical signal processing are also elaborated. This text likewise covers the impact of VLSI t

  11. Field emission electronics

    CERN Document Server

    Egorov, Nikolay

    2017-01-01

    This book is dedicated to field emission electronics, a promising field at the interface between “classic” vacuum electronics and nanotechnology. In addition to theoretical models, it includes detailed descriptions of experimental and research techniques and production technologies for different types of field emitters based on various construction principles. It particularly focuses on research into and production of field cathodes and electron guns using recently developed nanomaterials and carbon nanotubes. Further, it discusses the applications of field emission cathodes in new technologies such as light sources, flat screens, microwave and X-ray devices.

  12. Modern dictionary of electronics

    CERN Document Server

    Graf, Rudolf F

    1999-01-01

    Included in this fully revised classic are well over 28,000 terms, phrases, acronyms, and abbreviations from the ever-expanding worlds of consumer electronics, optics, microelectronics, computers, communications, and medical electronics. From the basic elements of theory to the most cutting-edge circuit technology, this book explains it all in both words and pictures.For easy reference, the author has provided definitions for standard abbreviations and equations as well as tables of SI (International System of Units) units, measurements, and schematic symbolsModern Dictionary of Electronics is

  13. Single Electron Tunneling

    International Nuclear Information System (INIS)

    Ruggiero, Steven T.

    2005-01-01

    Financial support for this project has led to advances in the science of single-electron phenomena. Our group reported the first observation of the so-called ''Coulomb Staircase'', which was produced by tunneling into ultra-small metal particles. This work showed well-defined tunneling voltage steps of width e/C and height e/RC, demonstrating tunneling quantized on the single-electron level. This work was published in a now well-cited Physical Review Letter. Single-electron physics is now a major sub-field of condensed-matter physics, and fundamental work in the area continues to be conducted by tunneling in ultra-small metal particles. In addition, there are now single-electron transistors that add a controlling gate to modulate the charge on ultra-small photolithographically defined capacitive elements. Single-electron transistors are now at the heart of at least one experimental quantum-computer element, and single-electron transistor pumps may soon be used to define fundamental quantities such as the farad (capacitance) and the ampere (current). Novel computer technology based on single-electron quantum dots is also being developed. In related work, our group played the leading role in the explanation of experimental results observed during the initial phases of tunneling experiments with the high-temperature superconductors. When so-called ''multiple-gap'' tunneling was reported, the phenomenon was correctly identified by our group as single-electron tunneling in small grains in the material. The main focus throughout this project has been to explore single electron phenomena both in traditional tunneling formats of the type metal/insulator/particles/insulator/metal and using scanning tunneling microscopy to probe few-particle systems. This has been done under varying conditions of temperature, applied magnetic field, and with different materials systems. These have included metals, semi-metals, and superconductors. Amongst a number of results, we have

  14. Electron collisions with biomolecules

    International Nuclear Information System (INIS)

    McKoy, V; Winstead, C

    2008-01-01

    We report on results of recent studies of collisions of low-energy electrons with nucleobases and other DNA constituents. A particular focus of these studies has been the identification and characterization of resonances that play a role in electron attachment leading to strand breaks in DNA. Comparison of the calculated resonance positions with results of electron transmission measurements is quite encouraging. However, the higher-lying π* resonances of the nucleobases appear to be of mixed elastic and core-excited character. Such resonant channel coupling raises the interesting possibility that the higher π*resonances in the nucleobases may promote dissociation of DNA by providing doorway states to triplet excited states.

  15. Quantum electronics basic theory

    CERN Document Server

    Fain, V M; Sanders, J H

    1969-01-01

    Quantum Electronics, Volume 1: Basic Theory is a condensed and generalized description of the many research and rapid progress done on the subject. It is translated from the Russian language. The volume describes the basic theory of quantum electronics, and shows how the concepts and equations followed in quantum electronics arise from the basic principles of theoretical physics. The book then briefly discusses the interaction of an electromagnetic field with matter. The text also covers the quantum theory of relaxation process when a quantum system approaches an equilibrium state, and explai

  16. Coding for Electronic Mail

    Science.gov (United States)

    Rice, R. F.; Lee, J. J.

    1986-01-01

    Scheme for coding facsimile messages promises to reduce data transmission requirements to one-tenth current level. Coding scheme paves way for true electronic mail in which handwritten, typed, or printed messages or diagrams sent virtually instantaneously - between buildings or between continents. Scheme, called Universal System for Efficient Electronic Mail (USEEM), uses unsupervised character recognition and adaptive noiseless coding of text. Image quality of resulting delivered messages improved over messages transmitted by conventional coding. Coding scheme compatible with direct-entry electronic mail as well as facsimile reproduction. Text transmitted in this scheme automatically translated to word-processor form.

  17. Community Colleges--Prevention Challenges. Issues in Prevention

    Science.gov (United States)

    Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

    2012-01-01

    This issue of "Issues in Prevention" focuses on prevention challenges facing community colleges. This issue contains the following articles: (1) Prevention at Community Colleges; (2) Q&A With William Auvenshine; (3) Chancellor's Initiative at the University of Wisconsin-Stout; (4) Alcohol Marketing in the Digital Age; and (5) Higher Education…

  18. Role of Enforcement in Prevention. Issues in Prevention

    Science.gov (United States)

    Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

    2012-01-01

    This issue of "Issues in Prevention" focuses on the role of enforcement in prevention. This issue contains the following articles: (1) What the Evidence Tells Us about the Role of Enforcement in Prevention; (2) Campus Briefs; (3) Q&A with Charles Cychosz; and (4) Higher Education Center Resources.

  19. Attomicroscopy: from femtosecond to attosecond electron microscopy

    Science.gov (United States)

    Hassan, Mohammed Th

    2018-02-01

    In the last decade, the development of ultrafast electron diffraction (UED) and microscopy (UEM) have enabled the imaging of atomic motion in real time and space. These pivotal table-top tools opened the door for a vast range of applications in different areas of science spanning chemistry, physics, materials science, and biology. We first discuss the basic principles and recent advancements, including some of the important applications, of both UED and UEM. Then, we discuss the recent advances in the field that have enhanced the spatial and temporal resolutions, where the latter, is however, still limited to a few hundreds of femtoseconds, preventing the imaging of ultrafast dynamics of matter lasting few tens of femtoseconds. Then, we present our new optical gating approach for generating an isolated 30 fs electron pulse with sufficient intensity to attain a temporal resolution on the same time scale. This achievement allows, for the first time, imaging the electron dynamics of matter. Finally, we demonstrate the feasibility of the optical gating approach to generate an isolated attosecond electron pulse, utilizing our recently demonstrated optical attosecond laser pulse, which paves the way for establishing the field of ‘Attomicroscopy’, ultimately enabling us to image the electron motion in action.

  20. [AIDS prevention in Germany].

    Science.gov (United States)

    Pott, E

    2007-04-01

    In 1987 the national AIDS prevention campaign "Gib AIDS keine Chance" (Don't give AIDS a chance) was started in Germany. After a very difficult and controversial political debate about a probably successful response to AIDS, in the end a political decision was made in favour of the implementation of a long term "social learning strategy". Thus, since then the Bundeszentrale für gesundheitliche Aufklärung (Federal Centre for Health Education, BZgA) has been running the campaign on behalf of the Federal Ministry of Health. The result of this prevention program is a low rate of infections. In Germany there were 2600 newly diagnosed infections in 2005: 59 % in homosexual men, 16 % by heterosexual contacts, 17 % in people from high prevalence countries and 7 % in i.v. drug users. In comparison to the international situation Germany has a relatively low HIV-prevalence even nowadays. However, Germany has also been confronted with an increasing number of newly diagnosed infections in the last few years. When the prevention program was started it was very important to build new structures for a successful implementation of the campaign. That meant for instance to build up an effective infrastructure for cooperation between the governmental and the nongovernmental sector, including organising the coordinated action among the partners at the federal, regional and local levels. Likewise, international networking was of great importance. A key element, relevant for the success of the campaign was the close cooperation at the federal level between the BZgA and the Deutsche AIDS Hilfe (German AIDS Help, DAH), to combine the highreach intervention in low-prevalence populations with intensive interventions for high prevalence groups. An effective national AIDS prevention campaign must reach the whole population; inform the public about the main risks of infection, about methods of protection and about what is not infectious. Moreover groups with a higher level of risk of