WorldWideScience

Sample records for prevacuolar compartment pvc

  1. Retromer subunits VPS35A and VPS29 mediate prevacuolar compartment (PVC) function in Arabidopsis.

    Science.gov (United States)

    Nodzynski, Tomasz; Feraru, Mugurel I; Hirsch, Sibylle; De Rycke, Riet; Niculaes, Claudiu; Boerjan, Wout; Van Leene, Jelle; De Jaeger, Geert; Vanneste, Steffen; Friml, Jirí

    2013-11-01

    Intracellular protein routing is mediated by vesicular transport which is tightly regulated in eukaryotes. The protein and lipid homeostasis depends on coordinated delivery of de novo synthesized or recycled cargoes to the plasma membrane by exocytosis and their subsequent removal by rerouting them for recycling or degradation. Here, we report the characterization of protein affected trafficking 3 (pat3) mutant that we identified by an epifluorescence-based forward genetic screen for mutants defective in subcellular distribution of Arabidopsis auxin transporter PIN1-GFP. While pat3 displays largely normal plant morphology and development in nutrient-rich conditions, it shows strong ectopic intracellular accumulations of different plasma membrane cargoes in structures that resemble prevacuolar compartments (PVC) with an aberrant morphology. Genetic mapping revealed that pat3 is defective in vacuolar protein sorting 35A (VPS35A), a putative subunit of the retromer complex that mediates retrograde trafficking between the PVC and trans-Golgi network. Similarly, a mutant defective in another retromer subunit, vps29, shows comparable subcellular defects in PVC morphology and protein accumulation. Thus, our data provide evidence that the retromer components VPS35A and VPS29 are essential for normal PVC morphology and normal trafficking of plasma membrane proteins in plants. In addition, we show that, out of the three VPS35 retromer subunits present in Arabidopsis thaliana genome, the VPS35 homolog A plays a prevailing role in trafficking to the lytic vacuole, presenting another level of complexity in the retromer-dependent vacuolar sorting.

  2. COMPARTMENTS

    DEFF Research Database (Denmark)

    Binder, Janos X; Pletscher-Frankild, Sune; Tsafou, Kalliopi

    2014-01-01

    Information on protein subcellular localization is important to understand the cellular functions of proteins. Currently, such information is manually curated from the literature, obtained from high-throughput microscopy-based screens and predicted from primary sequence. To get a comprehensive view...... of the localization of a protein, it is thus necessary to consult multiple databases and prediction tools. To address this, we present the COMPARTMENTS resource, which integrates all sources listed above as well as the results of automatic text mining. The resource is automatically kept up to date with source...... databases, and all localization evidence is mapped onto common protein identifiers and Gene Ontology terms. We further assign confidence scores to the localization evidence to facilitate comparison of different types and sources of evidence. To further improve the comparability, we assign confidence scores...

  3. PVC bacteria: variation of, but not exception to, the Gram-negative cell plan.

    Science.gov (United States)

    Devos, Damien P

    2014-01-01

    Planctomycetes-Verrucomicrobia-Chlamydiae (PVC) bacteria have features that differentiate them from classical Gram-negative (G-) bacteria. One such feature is their complex endomembrane system. Based on the difference of membrane organization and compartment identity, PVC bacteria were proposed to form an exception to the bacterial G- cell plan. Here I argue that all PVC membranes are derived from G- membranes, and that their organization and the compartments they form are similar to those of G- bacteria. I suggest that PVC membrane organization should be evaluated within a G- framework and as a variation of it. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Compartment syndrome

    Science.gov (United States)

    ... term (chronic) compartment syndrome can be caused by repetitive activities, such as running. The pressure in a compartment ... or loosened to relieve the pressure Stopping the repetitive activity or exercise, or changing the way it's done ...

  5. Compartment syndromes

    Science.gov (United States)

    Mubarak, S. J.; Pedowitz, R. A.; Hargens, A. R.

    1989-01-01

    The compartment syndrome is defined as a condition in which high pressure within a closed fascial space (muscle compartment) reduces capillary blood perfusion below the level necessary for tissue viability'. This condition occurs in acute and chronic (exertional) forms, and may be secondary to a variety of causes. The end-result of an extended period of elevated intramuscular pressure may be the development of irreversible tissue injury and Volkmann's contracture. The goal of treatment of the compartment syndrome is the reduction of intracompartmental pressure thus facilitating reperfusion of ischaemic tissue and this goal may be achieved by decompressive fasciotomy. Controversy exists regarding the critical pressure-time thresholds for surgical decompression and the optimal diagnostic methods of measuring intracompartmental pressures. This paper will update and review some current knowledge regarding the pathophysiology, aetiology, diagnosis, and treatment of the acute compartment syndrome.

  6. A reciclagem de PVC no Brasil Recycling of PVC Brazil

    Directory of Open Access Journals (Sweden)

    Ana Magda Piva

    1999-12-01

    Full Text Available Esta pesquisa discute as possibilidades práticas da reciclagem de PVC. Na reciclagem de polímeros, a do PVC representa uma importante parcela. PVC é um polímero que é usado em uma ampla faixa de produtos: filmes, fios, cabos, em compostos para uma variedade de formas. A reciclagem é uma técnica vantajosa, capaz de reproduzir as propriedades do polímero original, no polímero reciclado e isto em condições razoavelmente econômicas. A tecnologia brasileira, em relação a produtos reciclados, apresenta algumas diferenças da reciclagem tradicional. Métodos alternativos de reciclagens são necessários se os processos não desvalorizam os resultados finais.This research discuss the practical possibilities of recycling PVC. PVC, plays an important part in the recycleability of polymers; PVC is a polymer which is used in a very wide range of products -films, wire, cabes, in compounds for a variety of forms. Recycling is only worthwile, one is able to reproduce the original polymer properties in the polymer being recycled, and this under reasonable economics conditions. The brasilian technology that produces recycled products is a little different from the tradicional recycling. Therefore alternative methods to recycle are needed if recycling is not to devalue the end results.

  7. PVC-gulve i baderum

    DEFF Research Database (Denmark)

    Nielsen, P.A.

    Denne SBI-anvisning indeholder forskrifter for udførelsen af PVC-gulve, så det sikres, at gulvene får en tilstrækkelig god kvalitet. Forskrifterne svarer stort set til de, der findes i Norge og Sverige. Afsnittet om primere, spartelmasser og klæbestoffer er dog udvidet en del, ligesom forskrifterne...... er forsynet med forklarende tekst. Prøvemetoderne for PVC-gulvbelægninger er anbefalet af NKB's gulvudvalg....

  8. Study of biological compartments

    International Nuclear Information System (INIS)

    Rocha, A.F.G. da

    1976-01-01

    The several types of biological compartments are studied such as monocompartmental system, one-compartment balanced system irreversible fluxes, two closed compartment system, three compartment systems, catenary systems and mammilary systems [pt

  9. Web Based ATM PVC Management

    NARCIS (Netherlands)

    van der Waaij, B.D.; Sprenkels, Ron; van Beijnum, Bernhard J.F.; Pras, Aiko

    1998-01-01

    This paper discusses the design of a public domain web based ATM PVC Management tool for the Dutch SURFnet research ATM network. The aim of this tool is to assists in the creation and deletion of PVCs through local and remote ATM network domains. The tool includes security mechanisms to restrict the

  10. Superiorly Plasticized PVC/PBSA Blends through Crotonic and Acrylic Acid Functionalization of PVC

    Directory of Open Access Journals (Sweden)

    Arturo Salazar Avalos

    2017-03-01

    Full Text Available Superior plasticization efficiency was achieved by a grafting from functionalization of the PVC backbone. This was deduced to a synergistic effect of internal plasticization and improved intermolecular interactions between PVC and an oligomeric poly(butylene succinate-co-adipate (PBSA plasticizer. A mild grafting process for functionalization of the PVC chain by crotonic acid (CA or acrylic acid (AA was used. The formation of PVC-g-CA and PVC-g-AA was confirmed by FTIR and 1H NMR. Grafting with the seemingly similar monomers, CA and AA, resulted in different macromolecular structures. AA is easily homopolymerized and long hydrophilic poly(acrylic acid grafts are formed resulting in branched materials. Crotonic acid does not easily homopolymerize; instead, single crotonic acid units are located along the PVC chain, leading to basically linear PVC chains with pendant crotonic acid groups. The elongation of PVC-g-CA and PVC-g-AA in comparison to pure PVC were greatly increased from 6% to 128% and 167%, respectively, by the grafting reactions. Blending 20% (w/w PBSA with PVC, PVC-AA or PVC-CA further increased the elongation at break to 150%, 240% and 320%, respectively, clearly showing a significant synergistic effect in the blends with functionalized PVC. This is a clearly promising milestone towards environmentally friendly flexible PVC materials.

  11. Electrospinning of PVC with natural rubber

    Energy Technology Data Exchange (ETDEWEB)

    Othman, Muhammad Hariz; Abdullah, Ibrahim [Department of Chemistry, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); Mohamed, Mahathir [Radiation Processing Technology Division (BTS), Malaysian Nuclear Agency, Bangi, 43000, Kajang (Malaysia)

    2013-11-27

    Polyvinyl chloride (PVC) was mixed with natural rubbers which are liquid natural rubber (LNR), liquid epoxidised natural rubber (LENR) and liquid epoxidised natural rubber acrylate (LENRA) for a preparation of a fine non-woven fiber’s mat. PVC and each natural rubbers(PVC:LENR, PVC:LNR and PVC:LENRA) were mixed based on ratio of 70:30. Electrospinning method was used to prepare the fiber. The results show that the spinnable concentration of PVC/ natural rubber/THF solution is 16 wt%. The morphology, diameter, structure and degradation temperature of electrospun fibers were investigated by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). SEM photos showed that the morphology and diameter of the fibers were mainly affected by the addition of natural rubber. TGA results suggested that PVC electrospun fiber has higher degradation temperature than those electrospun fibers that contain natural rubber.

  12. Arabinogalactan glycosyltransferases target to a unique subcellular compartment that may function in unconventional secretion in plants

    DEFF Research Database (Denmark)

    Poulsen, Christian Peter; Dilokpimol, Adiphol; Mouille, Grégory

    2014-01-01

    background. Further, site-directed mutagenesis of a phosphorylation site of AtGALT29A (Y144) increased the frequency of the protein being targeted to the AtGALT31A-localized small compartments, suggesting a role of Y144 in subcellular targeting. The AtGALT31A localized to the small compartments were....... Taken together, AtGALT31A localized to small compartments that are distinct from the Golgi apparatus, the SYP61-localized TGN, FM4-64-stained endosomes and Wortmannin-vacuolated prevacuolar compartments, but may be part of an unconventional protein secretory pathway represented by EXO70E2 in plants.......-glycosylation enzymes rarely colocalized (3-18%), implicating a role of the small compartments in a part of arabinogalactan (O-glycan) biosynthesis rather than N-glycan processing. The dual localization of AtGALT31A was also observed for fluorescently tagged AtGALT31A stably expressed in an Arabidopsis atgalt31a mutant...

  13. RETGEM with polyvinylchloride (PVC) electrodes

    CERN Document Server

    Razin, V I; Reshetin, A I; Filippov, S N

    2009-01-01

    This paper presents a new design of the RETGEM (Resistive Electrode Thick GEM) based on electrodes made of a polyvinylchloride material (PVC). Our device can operate with gains of 10E5 as a conventional TGEM at low counting rates and as RPC in the case of high counting rates without of the transit to the violent sparks. The distinct feature of present RETGEM is the absent of the metal coating and lithographic technology for manufacturing of the protective dielectric rms. The electrodes from PVC permit to do the holes by a simple drilling machine. Detectors on a RETGEM basis could be useful in many fields of an application requiring a more cheap manufacturing and safe operation, for example, in a large neutrino experiments, in TPC, RICH systems.

  14. PVC pipes in gas distribution: still going strong!

    NARCIS (Netherlands)

    Hermkens, Rene; Wolters, Mannes; Weller, Jeroen; Visser, Roy; Davidovski, Z.; Belloir, P.; Fumire, J.

    2008-01-01

    In the Netherlands (impact-modified) PVC is the preferred material for low-pressure (30 and 100 mbar) gas distribution systems. More than 50% of the total length (about 122,000 km) of this system is rigid PVC or impact-modified PVC. The installation of rigid PVC (uPVC) pipelines started about 50

  15. Thermal degradation of PVC: A review.

    Science.gov (United States)

    Yu, Jie; Sun, Lushi; Ma, Chuan; Qiao, Yu; Yao, Hong

    2016-02-01

    This review summarized various chemical recycling methods for PVC, such as pyrolysis, catalytic dechlorination and hydrothermal treatment, with a view to solving the problem of energy crisis and the impact of environmental degradation of PVC. Emphasis was paid on the recent progress on the pyrolysis of PVC, including co-pyrolysis of PVC with biomass/coal and other plastics, catalytic dechlorination of raw PVC or Cl-containing oil and hydrothermal treatment using subcritical and supercritical water. Understanding the advantage and disadvantage of these treatment methods can be beneficial for treating PVC properly. The dehydrochlorination of PVC mainly happed at low temperature of 250-320°C. The process of PVC dehydrochlorination can catalyze and accelerate the biomass pyrolysis. The intermediates from dehydrochlorination stage of PVC can increase char yield of co-pyrolysis of PVC with PP/PE/PS. For the catalytic degradation and dechlorination of PVC, metal oxides catalysts mainly acted as adsorbents for the evolved HCl or as inhibitors of HCl formation depending on their basicity, while zeolites and noble metal catalysts can produce lighter oil, depending the total number of acid sites and the number of accessible acidic sites. For hydrothermal treatment, PVC decomposed through three stages. In the first region (TPVC went through dehydrochlorination to form polyene; in the second region (250°C

  16. A Strategy for Nonmigrating Highly Plasticized PVC.

    Science.gov (United States)

    Yuan, Jun; Cheng, Bin

    2017-08-24

    Nonmigrating highly plasticized PVC was prepared based on a new compound that acts as a plasticizer that was derived from di(2-ethylhexyl) 4-hydrophthalate and chlorinated paraffin-52. The as-prepared PVC has a plasticizing efficiency as high as DOP and its migration is totally suppressed. Unlike other reported methods, this approach increases the interaction between phthalate and PVC to suppress its migration, not simply to enlarge its molecular size (or molecular weight). This methodology is highly versatile for producing the desired non-leaching PVC with a permanent plasticizer effect.

  17. Environmental stress cracking of PVC and PVC-CPE - Part III Crack growth

    NARCIS (Netherlands)

    Breen, J.

    1995-01-01

    The fracture toughness of Polyvinylchloride (PVC) and PVC modified with 10% chlorinated polyethylene (PVC-CPE) was studied in vapour and in liquid environments by crack growth measurements on single-edge notch specimens under three-point bending at 23°C. In addition, some results obtained in air at

  18. Effects of recycled PVC content and processing temperature on the properties of PVC foam products

    Directory of Open Access Journals (Sweden)

    Sombatsompop, N.

    2005-05-01

    Full Text Available This work used different types of recycled PVC products including PVC pipes and bottles, as rigid recyclates, and PVC plastic coverings, as soft recyclate. The PVC recyclates were added into virgin PVC foam, ranging from 0-100wt%. The PVC blends were then moulded with different processing temperatures, and their properties were monitored. It was found that the concentration of the pipe recyclates up to 60 wt% could be used to add into the PVC virgin for production of rigid PVC foam products. The higher the recyclate content led to the higher the blend density and the mechanical properties (flexural and impact strength, and hardness. For bottle recyclates, up to 60 wt% of bottle recyclates could be used for rigid PVC foam production, but the overall properties, except for the impact strength, of the PVC foam did not improve withincreasing the recycled bottles. For recycled coverings, increasing plastic coverings led to an increase in average cell size, but resulted in decreases of impact and hardness resistances. The flexible or soft PVC foam products could be manufactured with use of 0-100wt% recycled coverings. In summary, it could be concludedthat recyclates of pipes, bottles and plastic coverings can be mixed with virgin PVC foam for making foam products.

  19. INVESTIGATION RHEOLOGICAL PROPERTIES OF PVC-BASED

    Directory of Open Access Journals (Sweden)

    S. I. Niftaliev

    2014-01-01

    Full Text Available Summary. Obtained hydrophobic filler compositions based on PVC from calcium carbonate, which is a byproduct in the preparation of mineral nitrogen fertilizers. The methods for pretreatment of the chalk used as a filler in PVC compositions. Conducted modifying the properties of chalk with hydrophobic additives: stearic acid, zinc stearate, calcium stearate. When stearic acid treated chalk heating leads to an interaction with the surface layers of calcium carbonate, a thin film of calcium stearate. Therefore, more cost-effective to create compositions with PVC content of one percent of calcium stearate as its hydrophobic surface is easily wetted by the polymer matrix, which provides rapid mixing of PVC compounds. As a result, the excipient serves as an additional stabilizer, providing higher thermal stability of PVC products, compared with its values for the composition of the compared with the other ingredients. Extrusion processes that are central to the processing of PVC compounds filled by acting them filler, fractional increase heat and accelerate melting and increase output. The rheological properties of polymeric compositions created PVC. A significant reduction in viscosity observed for water repellent based on stearic acid. Study viscosity characteristics for hydrophobic additives showed that their activity increased in the series: zinc stearate, calcium stearate, stearic acid. It was established that modifying additives used in the preparation of hydrophobic carbonate filler PVC compositions exhibit both plasticizers and stabilizing properties.

  20. Studies on heat shrinkage PVC tubes

    International Nuclear Information System (INIS)

    Pyun, Hyung Chick; Kim, Ki Yup; Nho, Young Chang

    1991-01-01

    Radiation crosslinking of PVC was investigated for the purpose of obtaining a suitable formulation for heat shrinkable tube. PVC was not only compounded with various crosslinking agents and plasticizers to evaluate their effects on the radiation sensitivity, heat shrinkable property and other mechanical properties, but also mixed with NBR, crosslinking agents and plasticizers to obtain efficient crosslinking yield and suitable mechanical properties for heat shrinkable tube. Gel yield of PVC increased with increasing unsaturation levels per molecular weight of crosslinking agents. Among crosslinking agents tested, TMPTMA with three unsaturated groups showed highest gel yield, while PVC containing NBR was more sensitive to crosslinking than PVC itself regardless the types of crosslinking agents and plasticizers. Tensile strength was increased with increasing radiation dose and gel percent, but elongation decreased. It was found that gel percent was increased with increasing radiation dose, heat transformation was decreased with increasing gel percent. When NBR was mixed with PVC, the radiation dosage required for enhancing yield of gel percent and heat transformation were found to be much smaller comparing with the case containing no NBR. Therefore, the addition of NBR to PVC was very effective to increase heat-resisting property of PVC. Heat shrinkage was not much varied with radiation dose, the types of crosslinking agents and plasticizers, but it was increased remarkably with decreasing stretching temperature and increasing annealing temperature. (Author)

  1. Australia slaps duties on PVC imports

    International Nuclear Information System (INIS)

    Young, I.

    1992-01-01

    The Australian Anti-Dumping Authority (ADA0) has imposed dumping duties on imports of polyvinyl chloride (PVC) resin from seven countries and on certain expanded polystyrene (EPS) beads from Korea and Singapore. The decisions come at the end of two separate investigations begun earlier this year. In its first finding, the ADA concluded that there has been dumping of PVC resin from Canada, China, France, Japan, Norway, Saudi Arabia, and Thailand, which has caused and threatens to cause material injury to the domestic PVC industry. An eighth country, Romania, was found not to have been exporting PVC to Australia. The case is the second of its kind in Australia focusing on PVC. In December 1991 the ADA found in favor of local producer sin a dumping complaint against Argentina, Brazil, Hungary, Israel, Korea, Mexico, Poland, Singapore, Taiwan, and the US

  2. PVC pipes in gas distribution: still going strong!

    OpenAIRE

    Hermkens, Rene; Wolters, Mannes; Weller, Jeroen; Visser, Roy; Davidovski, Z.; Belloir, P.; Fumire, J.

    2008-01-01

    In the Netherlands (impact-modified) PVC is the preferred material for low-pressure (30 and 100 mbar) gas distribution systems. More than 50% of the total length (about 122,000 km) of this system is rigid PVC or impact-modified PVC. The installation of rigid PVC (uPVC) pipelines started about 50 years ago. Presently, about 22,500 km of rigid PVC is still in operation. In this paper the good experiences with rigid PVC gas distribution systems in the Netherlands will be illustrated by results o...

  3. Morphological studies of DBSA-doped polyaniline/PVC blends.

    Science.gov (United States)

    Afzal, Asma Binat; Akhtar, Muhammad Javed; Ahmad, Maqsood

    2010-01-01

    Solution blending technique has been used to synthesize dodecylbenzenesulfonic acid (DBSA)-doped polyaniline (PAND)/poly-vinyl chloride (PVC) blends by two methods, namely redoping method (PANDR/PVC blends) and aqueous polymerization method (PANDA/PVC blends). PANDR/PVC blends show improved mechanical properties as compared to PANDA/PVC blends, which show brittle nature of the films. However, by increasing concentration of PANDR in the PVC matrix, PANDR/PVC blend films are becoming more rigid due to increases in the modulus of elasticity. Irradiation of blend samples by electron beam used during scanning electron microscopy (SEM) analyses has changed the morphology of PANDA/PVC blend films due to dehydrochlorination of free PVC, whereas PANDR/PVC blends remain unaffected during irradiation by electron beam.

  4. Signature protein of the PVC superphylum.

    Science.gov (United States)

    Lagkouvardos, Ilias; Jehl, Marc-André; Rattei, Thomas; Horn, Matthias

    2014-01-01

    The phyla Planctomycetes, Verrucomicrobia, Chlamydiae, Lentisphaerae, and "Candidatus Omnitrophica (OP3)" comprise bacteria that share an ancestor but show highly diverse biological and ecological features. Together, they constitute the PVC superphylum. Using large-scale comparative genome sequence analysis, we identified a protein uniquely shared among all of the known members of the PVC superphylum. We provide evidence that this signature protein is expressed by representative members of the PVC superphylum. Its predicted structure, physicochemical characteristics, and overexpression in Escherichia coli and gel retardation assays with purified signature protein suggest a housekeeping function with unspecific DNA/RNA binding activity. Phylogenetic analysis demonstrated that the signature protein is a suitable phylogenetic marker for members of the PVC superphylum, and the screening of published metagenome data indicated the existence of additional PVC members. This study provides further evidence of a common evolutionary history of the PVC superphylum and presents a unique case in which a single protein serves as an evolutionary link among otherwise highly diverse members of major bacterial groups.

  5. Photodegradation profiles of PVC compound and wood/PVC composites under UV weathering

    Directory of Open Access Journals (Sweden)

    N. Sombatsompop

    2013-02-01

    Full Text Available This work aimed to study the effect of different ultraviolet (UV weathering conditions (natural and accelerated on the photodegradation of polyvinyl chloride (PVC and wood/polyvinyl chloride (WPVC composites by considering the structural and physical changes of PVC and WPVC samples as well as examining the photodegradation profiles at different depths from the sample surfaces. The photodegradation of PVC and WPVC composites under natural weathering conditions were lower than those under accelerated weathering conditions. The addition of Tinuvin P stabilizer at 2 phr was sufficient to stabilize PVC and WPVC composites, whereas the presence of wood appeared to accelerate the photodegradation of PVC under both natural and accelerated weathering conditions. When considering the photodegradation profiles at different depths of the samples, it was found that the polyene and carbonyl sequences of PVC and WPVC composites were high at the sample surfaces and tended to decrease rapidly with increasing depth from the specimen surface before stabilizing at a depth of 60 μm for PVC and 80 μm for WPVC composites. The differences in specimen depths for the stabilization of polyene and carbonyl sequences in PVC and WPVC samples implied that the presence of wood particles enhanced the absorption of UV radiation by the WPVC composite samples.

  6. Experimental Investigation of Concrete Filled PVC Tube Columns Confined By Plain PVC Socket

    Directory of Open Access Journals (Sweden)

    Jamaluddin N.

    2017-01-01

    Full Text Available This paper presents results of an experimental study for concrete column filled poly vinyl chloride (PVC tubes confined by plain socket with 5.8 & 6.8 mm thicknesses, 102 mm diameter and 100 mm depth. The total of five concrete filled columns using PVC tubes (CFT PVC was tested to investigate the columns’ behaviour. The column is 700 mm height, 100 mm external diameter and 3.5 mm tube thickness with different thickness of plain socket. The results presented include maximum axial load, plain socket confinement effect, the mode of failure, and lateral PVC strain. The axial load enhancement of PVC-concrete columns confined using plain socket shows an increment of 21.3% up to 55.2% and axial strain from 21% to 40% compared with displacement for control composite columns at 192 kN ultimate load.

  7. ACUTE COMPARTMENT SYNDROME

    African Journals Online (AJOL)

    muscle destruction, muscle fibrosis, contractures and permanent disability and at worst case scenario of amputation (3,4). As reported by Frink et al (3) on their study on acute compartment syndrome it can occur even when there is no fracture. Also general surgeons have reported acute compartment syndrome.

  8. Two cases of liver angiosarcoma among polyvinyl chloride (PVC) extruders of an Italian factory producing PVC bags and other containers.

    Science.gov (United States)

    Maltoni, C; Clini, C; Vicini, F; Masina, A

    1984-01-01

    Two cases are reported of liver angiosarcoma occurring among polyvinyl chloride (PVC) extruders from a small Italian factory producing PVC bags and other containers. The possibility that PVC extrusion carries a risk of liver angiosarcoma is important because of the very large number of people working with extruding, manufacturing and handling PVC, as compared with the number of people working in PVC polymerization and/or VC production. In the past, the level of vinyl chloride (VC) concentration in PVC extrusion workplaces has been thought to be "safe".

  9. Data of evolutionary structure change: 1AYM2-1PVC2 [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1AYM2-1PVC2 1AYM 1PVC 2 2 ----SDRIIQITRGDSTITSQDVANAVVGYGVWPHYLTP...GREV-------GTQVENEKQPSDDNWLNFDGTLLGNLLIFPHQFINLRSNNSATLIVPYVNAVPMDSMVRHNNWSLVIIPVCQLQS-NNISNIVPITVSISPMCAEFS...e> ASN CA 176 1PVC 2 1PVC

  10. Data of evolutionary structure change: 1AYN2-1PVC2 [Confc[Archive

    Lifescience Database Archive (English)

    Full Text Available 1AYN2-1PVC2 1AYN 1PVC 2 2 ----SDRIIQITRGDSTITSQDVANAVVGYGVWPHYLTP...GREV-------GTQVENEKQPSDDNWLNFDGTLLGNLLIFPHQFINLRSNNSATLIVPYVNAVPMDSMVRHNNWSLVIIPVCQLQS-NNISNIVPITVSISPMCAEFS...ine>ASN CA 177 1PVC 2 1PVC

  11. Superhydrophobic Materials Technology-PVC Bonding Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, Scott R. [Oak Ridge National Laboratory; Efird, Marty [VeloxFlow, LLC

    2013-05-03

    The purpose of the technology maturation project was to develop an enhanced application technique for applying diatomaceous earth with pinned polysiloxane oil to PVC pipes and materials. The oil infiltration technique is applied as a spray of diluted oil in a solvent onto the superhydrophobic diatomaceous earth substrate. This makes the surface take on the following characteristics: wet-cleanable; anti-biofouling; waterproof; and anti-corrosion. The project involved obtaining input and supplies from VeloxFlow and the development of successful techniques that would quickly result in a commercial license agreement with VeloxFlow and other companies that use PVC materials in a variety of other fields of use.

  12. Experimental Investigation of Concrete Filled PVC Tube Columns Confined By Plain PVC Socket

    OpenAIRE

    Jamaluddin N.; Azeez A. A.; Abd Rahman N.; Attiyah A. N.; Wan Ibrahim M. H.; Mohamad N.; Adnan S. H.

    2017-01-01

    This paper presents results of an experimental study for concrete column filled poly vinyl chloride (PVC) tubes confined by plain socket with 5.8 & 6.8 mm thicknesses, 102 mm diameter and 100 mm depth. The total of five concrete filled columns using PVC tubes (CFT PVC) was tested to investigate the columns’ behaviour. The column is 700 mm height, 100 mm external diameter and 3.5 mm tube thickness with different thickness of plain socket. The results presented include maximum axial load, plain...

  13. DNA Virus Replication Compartments

    Science.gov (United States)

    Schmid, Melanie; Speiseder, Thomas; Dobner, Thomas

    2014-01-01

    Viruses employ a variety of strategies to usurp and control cellular activities through the orchestrated recruitment of macromolecules to specific cytoplasmic or nuclear compartments. Formation of such specialized virus-induced cellular microenvironments, which have been termed viroplasms, virus factories, or virus replication centers, complexes, or compartments, depends on molecular interactions between viral and cellular factors that participate in viral genome expression and replication and are in some cases associated with sites of virion assembly. These virus-induced compartments function not only to recruit and concentrate factors required for essential steps of the viral replication cycle but also to control the cellular mechanisms of antiviral defense. In this review, we summarize characteristic features of viral replication compartments from different virus families and discuss similarities in the viral and cellular activities that are associated with their assembly and the functions they facilitate for viral replication. PMID:24257611

  14. Abdominal Compartment Syndrome

    Directory of Open Access Journals (Sweden)

    Pınar Zeyneloğlu

    2015-04-01

    Full Text Available Intraabdominal hypertension and Abdominal compartment syndrome are causes of morbidity and mortality in critical care patients. Timely diagnosis and treatment may improve organ functions. Intra-abdominal pressure monitoring is vital during evaluation of the patients and in the management algorithms. The incidence, definition and risk factors, clinical presentation, diagnosis and management of intraabdominal hypertension and Abdominal compartment syndrome were reviewed here.

  15. Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes.

    Science.gov (United States)

    Kou, S C; Lee, G; Poon, C S; Lai, W L

    2009-02-01

    This paper aims to investigate the fresh and hardened properties of lightweight aggregate concretes that are prepared with the use of recycled plastic waste sourced from scraped PVC pipes to replace river sand as fine aggregates. A number of laboratory prepared concrete mixes were tested, in which river sand was partially replaced by PVC plastic waste granules in percentages of 0%, 5%, 15%, 30% and 45% by volume. Two major findings are identified. The positive side shows that the concrete prepared with a partial replacement by PVC was lighter (lower density), was more ductile (greater Poisson's ratios and reduced modulus of elasticity), and had lower drying shrinkage and higher resistance to chloride ion penetration. The negative side reveals that the workability, compressive strength and tensile splitting strength of the concretes were reduced. The results gathered would form a part of useful information for recycling PVC plastic waste in lightweight concrete mixes.

  16. Evaluation of ultraliner PVC alloy pipeliner.

    Science.gov (United States)

    2013-12-01

    In an effort to evaluate promising pipe lining techniques, the Agency installed two Ultraliner : PVC Alloy Pipeliners in the town of Barton, Vermont in May of 2003; one in an 18 : - : inch (450 : mm nominal) reinforced concrete pipe (RCP) and one in ...

  17. Polarizing PVC--A Discrepant Event

    Science.gov (United States)

    Headly, David; Karabatek, Mohamed

    2016-01-01

    This article describes an experiment teaching polarization phenomena and the Triboelectric Series in a unit on electrostatics. Using rods (2-3 ft in length) made from wood, aluminum, PVC, and Plexiglas on an inverted watch glass, these items demonstrated to the class how a party balloon rubbed with fake rabbit fur (charging the balloon negative)…

  18. Flexible PVC flame retarded with expandable graphite

    CSIR Research Space (South Africa)

    Focke, WW

    2014-02-01

    Full Text Available The utility of expandable graphite as a flame retardant for PVC, plasticized with 60 phr of a phosphate ester, was investigated. Cone calorimeter results, at a radiant flux of 35 kW m 2, revealed that adding only 5 wt.% expandable graphite lowered...

  19. Estimation of life of PVC cables

    International Nuclear Information System (INIS)

    Bora, J.S.; Babar, A.K.

    1989-01-01

    Life-spans at various extrapolated temperatures corresponding to early, mid and late-stage failures of PVC are quite consistent and is about 32 years at 30degC. For every 10degC rise in ambient temperature life becomes less than half. (author). 2 tabs

  20. Polarizing PVC — A Discrepant Event

    Science.gov (United States)

    Headly, David; Karabatek, Mohamed

    2016-01-01

    Each year when teaching polarization phenomena and the Triboelectric Series in a unit on electrostatics, I would balance some rods (2-3 ft in length) made from wood, aluminum, PVC, and Plexiglas on an inverted watch glass and demonstrate to the class how a party balloon rubbed with fake rabbit fur (charging the balloon negative) would always attract the uncharged rods, causing them to rotate towards the balloon (see Fig. 1). The fact that a charged object always attracts a neutral object due to the induced dipole in the latter is a great way to test if something is in fact charged. Surprisingly, the PVC pipe would usually, but not always, repel the charged balloon and rotate away! Repulsion means that neither of the objects are electrically neutral. In a separate test, after rubbing together a Plexiglas rod with a polyethylene grocery bag (making the rod positively charged and the bag negatively charged), the PVC usually attracts the rod. With the help of a student as part of his senior project, I finally decided to investigate further the source of the negative charge that exists on PVC. Specifically, is it nothing more than static charge that builds up on the pipe from unavoidable contact with its surroundings, or is it somehow intrinsic to the manufacturing process?

  1. Electrical conduction mechanism of polyvinyl chloride (PVC ...

    Indian Academy of Sciences (India)

    Abstract. The electrical conduction mechanism in polyvinyl chloride (PVC)– polymethyl methacrylate (PMMA) blend film has been studied at various temperatures in the range 313 K to 353 K. The results are presented in the form of I–V characteristics. Analysis has been made in the light of Poole–Frenkel, Fowler–Nordheim, ...

  2. [Safety assessment of DEHP from PVC medical devices].

    Science.gov (United States)

    Yang, Xiaodong

    2012-03-01

    To Investigate necessity of safety evaluation, research ideas, evaluation methods of DEHP in PVC medical devices. The ideas of The United States, Japan and the European Union on safety evaluation of DEHP in PVC medical devices was reviewed and sorted, regarding to currently requirements for PVC medical devices in our country, the research ideas and methods of DEHP in PVC medical devices was explored. DEHP released from High-risk PVC medical devices may exceed human tolerance intake values and thus potentially be harmful to human health. So it is necessary for production enterprise to assess safety of DEHP in PVC medical device. The assessment can be done by material control and detecting release of DEHP from PVC medical devices. In order to assess safety of DEHP in PVC medical device, production enterprise can firstly assess materials according to national standard. Secondly, production enterprise can detect release of DEHP from PVC medical devices simulating clinical application. By comparing release of DEHP from PVC medical devices and TI, safety of DEHP in PVC medical device can be evaluated.

  3. Spontaneous Thigh Compartment Syndrome

    Directory of Open Access Journals (Sweden)

    Khan, Sameer K

    2011-02-01

    Full Text Available A young man presented with a painful and swollen thigh, without any history of trauma, illness, coagulopathic medication or recent exertional exercise. Preliminary imaging delineated a haematoma in the anterior thigh, without any fractures or muscle trauma. Emergent fasciotomies were performed. No pathology could be identified intra-operatively, or on follow-up imaging. A review of thigh compartment syndromes described in literature is presented in a table. Emergency physicians and traumatologists should be cognisant of spontaneous atraumatic presentations of thigh compartment syndrome, to ensure prompt referral and definitive management of this limb-threatening condition. [West J Emerg Med. 2011;12(1:134-138].

  4. Radiation effect on PVC/ENR blends

    International Nuclear Information System (INIS)

    Chantara Thevy Ratnam; Khairul Zaman Mohd Dahlan

    1997-01-01

    The effect of irradiation on the physical properties of Polyvinyl Chloride / Epoxidised Natural Rubber Blends (PVC/ENR blends) were investigated. The enhancement in tensile strength, elongation at break, hardness and aging properties of the blends have confirmed the positive effect of irradiation on the blends. It is evident from gel fraction and infra red spectroscopic studies that the blends of PVC and ENR cross-linked upon irradiation. The results also revealed that at any blend composition, the enhancement in properties depend on irradiation dose which controls the degree of radiation induced cross-linking. In an attempt to maximize the constructive effect of irradiation, the influence of various additives such as stabilizers, radiation sensitizers, fillers and processing aids on the blend properties were studied. The changes in blend properties upon irradiation with the presents of above additives were also presented in this paper

  5. The viability of PVC/Al blister reuse and PVC property studies after ionizing radiation processing

    International Nuclear Information System (INIS)

    Castro, Alex Terela Pinheiro de

    2008-01-01

    The objective of this research was to separate, by means of a process of dissolution, the PVC and the aluminum that compose blister packs, generally used for pharmaceutical pills. We also studied the effect of the ionizing radiation on the PVC, and, finally, the mechanical recycling of the separated PVC, by a process of extrusion. The material we used in this work is the surplus of the pharmaceutical industry, i.e., packs with defects or burrs. We ground the material to facilitate the handling and the homogenization of the system. After that, we chose two bases for the dissolution of the aluminum: the sodium hydroxide and the potassium hydroxide. We used a system with two concentrations (1 and 2M) for each base, and for every solution we had also an agitated and a non-agitated process. From this method resulted eight experiments. After the dissolution, the samples of the material were submitted to ionizing radiation with doses of 50, 100, 150 and 200 kGy in the Dynamitron II electron accelerator of the CTR-IPEN/CNEN-SP. In the following, these samples were submitted to traction resistance tests to analyze which modifications the irradiation caused. The last step of the research was the recycling of the PVC separated from the Aluminum. We made the recycling in industrial equipment, a PVC tube extruder. The material was combined with lubricants, heat stabilizers and pigment in an intensive mixer and processed into the form of rigid PVC electrical conduits. After the eight experiments, the system with potassium hydroxide base, concentration of 2M and agitation presented the best relation between time of dissolution and characteristics of the resulting material, without degradation of the PVC. In the irradiated samples, the color of the material changed as well as its extension that was as larger as the dose of irradiation they received, indicating the dissociation of the PVC molecules. The extrusion of the PVC was successfully realized: about 200 kg (440 pounds) of

  6. Chronic Exertional Compartment Syndrome

    Science.gov (United States)

    ... it's more common in athletes who participate in activities that involve repetitive impact, such as running. Chronic exertional compartment syndrome ... and female athletes under 30. Type of exercise. Repetitive impact activity — such as running or fast walking — increases your ...

  7. Stability study of docetaxel solution (0.9%, saline) using Non-PVC and PVC tubes for intravenous administration.

    Science.gov (United States)

    Park, Kang Hoon; Chung, Dong June

    2015-01-01

    Di-2-ethylhexyl phthalate (DEHP) are added to poly(vinyl chloride)(PVC) infusion tubes as a plasticizer to ensure tube flexibility. In addition to previously reported disadvantages of DEHP, released DEHP molecules from PVC tubes can easily interact with surfactants in anticancer drug solutions (i.e., polysorbate 80 for Taxotere®-Inj) and reduce the solubility of docetaxel in aqueous solution during anticancer drug administration. In this study, we investigated the in vitro stability of docetaxel in a 0.9% saline solution under an intravenous administration condition using a PVC tube (high DEHP content) and non-PVC infused tube. The docetaxel solution circulating through the non-PVC tube had better solution stability than through the PVC tube(high DEHP content).

  8. Morphological characteristics of polyvinyl chloride (PVC) dechlorination during pyrolysis process: Influence of PVC content and heating rate.

    Science.gov (United States)

    Cao, Qiongmin; Yuan, Guoan; Yin, Lijie; Chen, Dezhen; He, Pinjing; Wang, Hai

    2016-12-01

    In this research morphological techniques were used to characterize dechlorination process of PVC when it is in the mixed waste plastics and the two important factors influencing this process, namely, the proportion of PVC in the mixed plastics and heating rate adopted in the pyrolysis process were investigated. During the pyrolysis process for the mixed plastics containing PVC, the morphologic characteristics describing PVC dechlorination behaviors were obtained with help of a high-speed infrared camera and image processing tools. At the same time emission of hydrogen chloride (HCl) was detected to find out the start and termination of HCl release. The PVC contents in the mixed plastics varied from 0% to 12% in mass and the heating rate for PVC was changed from 10 to 60°C/min. The morphologic parameters including "bubble ratio" (BR) and "pixel area" (PA) were found to have obvious features matching with PVC dechlorination process therefore can be used to characterize dechlorination of PVC alone and in the mixed plastics. It has been also found that shape of HCl emission curve is independent of PVC proportions in the mixed plastics, but shifts to right side with elevated heating rate; and all of which can be quantitatively reflected in morphologic parameters vs. temperature curves. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Enhancement of the thermo-mechanical properties and efficacy of mixing technique in the preparation of graphene/PVC nanocomposites compared to carbon nanotubes/PVC

    Directory of Open Access Journals (Sweden)

    Mudassir Hasan

    2014-12-01

    Full Text Available Thin films of poly vinyl chloride (PVC/multiwalled carbon nanotubes (MWCNT and PVC/graphene (GN nanocomposites were prepared by mixing in the presence of different quantities of nanoparticles. Film casting was performed using tetrahydrofuran as a solvent. The as-prepared PVC/MWCNT and PVC/GN nanocomposites were characterized by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and diffused reflectance spectroscopy. Only the PVC/GN nanocomposite films were evaluated further for detailed mechanical analysis because of the poor dispersion of MWCNTs in PVC. The PVC/GN nanocomposite films were thermo-mechanically more stable than the PVC films. These nanocomposites have potential as a replacement material for PVC and PVC/MWCNT owing to their better dispersion and high stability.

  10. PET and PVC Separation with Hyperspectral Imagery

    Science.gov (United States)

    Moroni, Monica; Mei, Alessandro; Leonardi, Alessandra; Lupo, Emanuela; La Marca, Floriana

    2015-01-01

    Traditional plants for plastic separation in homogeneous products employ material physical properties (for instance density). Due to the small intervals of variability of different polymer properties, the output quality may not be adequate. Sensing technologies based on hyperspectral imaging have been introduced in order to classify materials and to increase the quality of recycled products, which have to comply with specific standards determined by industrial applications. This paper presents the results of the characterization of two different plastic polymers—polyethylene terephthalate (PET) and polyvinyl chloride (PVC)—in different phases of their life cycle (primary raw materials, urban and urban-assimilated waste and secondary raw materials) to show the contribution of hyperspectral sensors in the field of material recycling. This is accomplished via near-infrared (900–1700 nm) reflectance spectra extracted from hyperspectral images acquired with a two-linear-spectrometer apparatus. Results have shown that a rapid and reliable identification of PET and PVC can be achieved by using a simple two near-infrared wavelength operator coupled to an analysis of reflectance spectra. This resulted in 100% classification accuracy. A sensor based on this identification method appears suitable and inexpensive to build and provides the necessary speed and performance required by the recycling industry. PMID:25609050

  11. Cell Adhesion to Plasma-Coated PVC

    Directory of Open Access Journals (Sweden)

    Elidiane C. Rangel

    2014-01-01

    Full Text Available To produce environments suitable for cell culture, thin polymer films were deposited onto commercial PVC plates from radiofrequency acetylene-argon plasmas. The proportion of argon in the plasmas, PAr, was varied from 5.3 to 65.8%. The adhesion and growth of Vero cells on the coated surfaces were examined for different incubation times. Cytotoxicity tests were performed using spectroscopic methods. Carbon, O, and N were detected in all the samples using XPS. Roughness remained almost unchanged in the samples prepared with 5.3 and 28.9% but tended to increase for the films deposited with PAr between 28.9 and 55.3%. Surface free energy increased with increasing PAr, except for the sample prepared at 28.9% of Ar, which presented the least reactive surface. Cells proliferated on all the samples, including the bare PVC. Independently of the deposition condition there was no evidence of cytotoxicity, indicating the viability of such coatings for designing biocompatible devices.

  12. Compartment syndrome without pain!

    LENUS (Irish Health Repository)

    O'Sullivan, M J

    2012-02-03

    We report the case of a young male patient who underwent intra-medullary nailing for a closed, displaced mid-shaft fracture of tibia and fibula. He was commenced on patient controlled analgesia post-operatively. A diagnosis of compartment syndrome in the patient\\'s leg was delayed because he did not exhibit a pain response. This ultimately resulted in a below-knee amputation of the patient\\'s leg. We caution against the use of patient controlled analgesia in any traumatised limb distal to the hip or the shoulder.

  13. [Quantitative determination of PVC concentration by Raman spectrum].

    Science.gov (United States)

    Huang, Zheng-liang; Wang, Jing-dai; Jiang, Bin-bo; Yang, Yong-rong; Chen, Jie-xun; Liao, Zu-wei

    2011-03-01

    Quantitative determination of polyvinyl chloride (PVC) concentration by Raman spectrum was studied in the present work. According to partial least squares (PLS) analysis, it was found that scores of PLS factor 1 were proportional to the concentrations of the sample solutions. Meanwhile, the loadings of factor 1 could reflect the contents of PVC and cyclohexanone simultaneously. The PLS regression model for PVC concentration prediction was built. The values of r and root mean square error (RMSE) between predictive results and actual values were 0.9963 and 2.775, respectively. The Raman characteristic peaks of PVC and cyclohexanone were found, including the C-Cl bond for PVC (620 and 695 cm(-1)) and the alicyclic ketone for cyclohexanone (1709 cm(-1)). By using internal standard method, another model for PVC concentration prediction was established, and the values of r and RMSE were 0.9941 and 3.151, respectively. The results indicated that it is feasible to use Raman spectrum to detect the PVC concentration, which is of significant importance to PVC recycling.

  14. Degradation studies on plasticized PVC films submited to gamma radiation

    Directory of Open Access Journals (Sweden)

    Vinhas Glória Maria

    2003-01-01

    Full Text Available Poly (vinyl chloride, PVC, is a rigid polymer and for several of its applications must be compounded with plasticizing agents. The plasticizers minimize the dipolar interactions, which exist between the polymer's chains, promoting their mobility. In this work we studied the properties of PVC/plasticizer systems submitted to different doses of gamma radiation. We have used four commercial plasticizers amongt them di(2-ethylhexyl phthalate, DEHP, which is present in a great number of commercial applications. The PVC/plasticizer systems have been studied as films made by the solvent evaporation technique. Irradiated and non-irradiated films have been characterized by viscosimetric analysis, mechanical essays and infrared spectroscopy. The results have shown that the rigid, non plasticized, PVC film presented the greatest degradation index, while among the plasticized films the one which presented the larger degradation index due to chain scission was the DEHP plasticized PVC.

  15. Strawberries packaged with Polyvinyl Chloride (PVC film/ Morangos embalados com filme de Ppolicloreto de Vinila (PVC

    Directory of Open Access Journals (Sweden)

    Sergio Ruffo Roberto

    2006-06-01

    Full Text Available Strawberries cv. Dover with approximately 75% of their surface with red color was packaged in disposable polyethylene terephthalate (PET container and sealed with PVC film of 15mm thick. Strawberries without film serves as control. The fruits were stored at 12°C for ten days and there were determined during storage time the titratable acidity, solid soluble and vitamin C contents, color, respiration rate, texture and weight loss. After 6 days the strawberries packaged without film had decayed while the fruits packaged with PVC film were in conditions of consumption and commercialization. After 10 days all fruits were inappropriate to consumption. Packages with PVC film extended the shelf life of strawberries preserving the color characteristic of the product and vitamin C content, reducing the respiration rate and weight loss, characterizing this packaging as being adequate to this kind of product.Foram utilizados morangos cv. Dover com aproximadamente 75% de sua superfície com coloração vermelha e embalados em potes de polietileno tereftalato (PET. No tratamento CONTROLE os morangos foram acondicionados sem filme e no tratamento FILME, as embalagens foram seladas com filme de PVC de 15mm de espessura. As frutas foram armazenadas a 12°C por dez dias e foram determinadas ao longo do tempo acidez titulável, sólidos solúveis, vitamina C, cor, taxa de respiração, textura e perda de massa. Após 6 dias de armazenagem os morangos CONTROLE estavam impróprios para consumo pois apresentavam deterioração visível por bolores enquanto que os embalados com PVC estavam em condições de consumo e comercialização. Após 10 dias todos os morangos estavam impróprios para consumo. A embalagem utilizando filme de PVC aumentou a vida de prateleira de morangos em relação aos sem embalagem pois preservou melhor a coloração característica do produto e teor de vitamina C e reduziu as taxas de respiração e de perda de massa, caracterizando a

  16. The role of interpolation in PVC-induced cardiomyopathy.

    Science.gov (United States)

    Olgun, Hilal; Yokokawa, Miki; Baman, Timir; Kim, Hyungjin Myra; Armstrong, William; Good, Eric; Chugh, Aman; Pelosi, Frank; Crawford, Thomas; Oral, Hakan; Morady, Fred; Bogun, Frank

    2011-07-01

    Frequent premature ventricular complexes (PVCs) can cause cardiomyopathy. The mechanism is not known and may be multifactorial. This study assessed the role of PVC interpolation in PVC-induced cardiomyopathy. In 51 consecutive patients (14 women, age 49 ± 15 years, ejection fraction (EF) 0.49 ± 0.14) with frequent PVCs, 24-hour Holter recordings were performed. The amount of interpolation was determined and correlated with the presence of PVC-induced cardiomyopathy. In addition, parameters measured during an electrophysiology study were correlated with the Holter findings. Fourteen of the 21 patients (67%) with cardiomyopathy had interpolated PVCs, compared with only 6 of 30 patients (20%) without PVC-induced cardiomyopathy (P PVC burden than patients without interpolation (28% ± 12% vs. 15% ± 15%; P = .002). The burden of interpolated PVCs correlated with the presence of PVC cardiomyopathy (21% ± 30% vs. 4% ± 13%; P = .008). Both PVC burden and interpolation independently predicted PVC-induced cardiomyopathy (odds ratio 1.07, 95% confidence interval 1.01 to 1.13, P = .02; and odds ratio 4.43, 95% confidence interval 1.06 to 18.48, P = .04, respectively). The presence of ventriculoatrial block at a ventricular pacing cycle length of 600 ms correlated with the presence of interpolation (P = .004). Patients with interpolation had a longer mean ventriculoatrial block cycle length than patients without interpolated PVCs (520 ± 110 ms vs. 394 ± 92 ms; P = .01). The presence of interpolated PVCs was predictive of the presence of PVC cardiomyopathy. Interpolation may play an important role in the generation of PVC-induced cardiomyopathy. Copyright © 2011 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

  17. Recurrence of PVCs in patients with PVC-induced cardiomyopathy.

    Science.gov (United States)

    Baser, Kazim; Bas, Hatice Duygu; LaBounty, Troy; Yokokawa, Miki; Good, Eric; Latchamsetty, Rakesh; Morady, Fred; Bogun, Frank

    2015-07-01

    The natural history of premature ventricular complex (PVC)-induced cardiomyopathy is incompletely understood. The purpose of this study was to assess long term follow-up data in patients who underwent successful PVC ablation for PVC-induced cardiomyopathy. The subjects of this study were 60 patients (17 women; mean age 52.5 ± 16.8 years; ejection fraction [EF] 37.3 ± 8.5%, median 40%, interquartile range [IQR] 15) with PVC-induced cardiomyopathy who underwent successful ablation of their predominant PVCs between 2005 and 2012. Patients were followed up for a mean of 23.6 ± 17.2 months. EF improved to 57.2 ± 4.7% (median 55%, IQR 5; P = .0001) within 9.6 ± 8.4 months of the ablation procedure. During follow-up, 10 of 60 patients (16.7%) had recurrent frequent PVCs and 50 patients (83.3%) did not. Patients underwent repeat assessment of EF and PVC burden. During follow-up of 23.6 ± 17.2 months, 10 patients had recurrent frequent PVCs, with an increase of their PVC burden from 1.4 ± 0.9% (median 1.05%, IQR 1.59) after the initial ablation to 27.2 ± 8.8% (median 26.0%, IQR 18.2; P = .018). Their EF decreased from 55.7 ± 3.4% (median 55%, IQR 5.8) after the initial ablation to 40.2 ± 5.1% (median 40%, IQR 15; P = .005). In the remaining patients with PVC-induced cardiomyopathy, EF and PVC burden remained unchanged during follow-up. Patients with PVC recurrence had a higher number of pleomorphic PVC morphologies during initial presentation (4.7 ± 2.2 vs 2.5 ± 2.8, P = .002). Recurrence of frequent PVCs in patients with a history of PVC cardiomyopathy can result in recurrence of cardiomyopathy. Follow-up in patients with PVC-induced cardiomyopathy is important, especially if patients were asymptomatic from the PVCs and have pleomorphic PVCs. Copyright © 2015 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

  18. Strain rate dependence in plasticized and un-plasticized PVC

    OpenAIRE

    Siviour C.R.; Kendall M.J.

    2012-01-01

    An experimental and analytical investigation has been made into the mechanical behaviour of two poly (vinyl chloride) (PVC) polymers – an un-plasticized PVC and a diisononyl phthalate (DINP)-plasticized PVC. Measurements of the compressive stress-strain behaviour of the PVCs at strain rates ranging from 10−3 to 103s−1 and temperatures from − 60 to 100∘C are presented. Dynamic Mechanical Analysis was also performed in order to understand the material transitions observed in compression testing...

  19. Studies of PVC/ENR blends: blend compositions

    International Nuclear Information System (INIS)

    Chantara Thevy Ratnam; Khairul Zaman Mohd Dahlan; Nasir, M.; Baharin, A.

    2002-01-01

    Blends of poly(vinyl chloride/epoxidized natural rubber (PVC/ENR) were prepared by using Bra bender Plasticorder at compositions ranging from 0-100% PVC. They were blended at 150 degree C mixing temperature, 50 rpm rotor speed and 10 minutes mixing time. The blends were characterized for tensile strength , elongation at break, glass transition temperatures and Fourier transform infra red spectroscopy (FTIR). Results revealed that as the PVC content increases the blend behaviour changes from elastomeric to glassy. However the blends found to be compatible at all compositions. (Author)

  20. Phthalate Migration Study from PVC Grafted by Gamma Radiation

    International Nuclear Information System (INIS)

    Manzoli, J.E.; Duarte, C.; Somesari, E.; Silveira, C.; Paes, H.A.; Manzoli, J.E.; Araujo, F.D.C.; Panzarini, L.C.G.A.

    2009-01-01

    PVC is a useful polymer used for many applications, as packaging of food, blood and in contact with body fluids. The most widely-used plasticizer, to make it flexible, is the phthalate DEHP, and its toxicity is a problem. A special radiation grafting of PVC allows an important reduction of thrombogenic properties, and it could cause changes in the DEHP migration too. In this work it is presented the methodology using gas chromatography and numerical simulation for the measurement of DEHP migration from PVC grafted with monomer DMAEMA. The grafting could be an interesting way to reduce DEHP migration

  1. Economic sensitivity of DAW incineration to PVC content

    International Nuclear Information System (INIS)

    Rossmassler, R.L.

    1986-01-01

    Economic analyses of the volume reduction of low level radwaste, including the incinerator of Dry Active Waste (DAW), spent resins and filter sludges, are performed using the microcomputer code VOLREDUCER. Based on BWR and PWR data taken from previous EPRI work, the sensitivity of incinerator economics to polyvinyl chloride (PVC) content in DAW is examined. An annual cost penalty associated with the presence of PVC in the waste is formulated, and the sensitivity of this penalty to a variety of parameters is determined. The alternative of sorting out PVC from the rest of the waste is compared to incineration with regard to this annual cost penalty. These penalties may range as high as $100,000 annually depending on the waste characteristics and percent of PVC

  2. CONTECH(R) A-2000 polyvinyl chloride (PVC) plastic pipe.

    Science.gov (United States)

    2015-03-01

    Determine the effectiveness and long-term durability of the Contech A-2000 PVC pipe : in an irrigation application. This type of pipe may prove to be a viable alternative to : reinforced concrete pipe (RCP).

  3. The PVC superphylum: exceptions to the bacterial definition?

    Science.gov (United States)

    Fuerst, John A

    2013-10-01

    The PVC superphylum is a grouping of distinct phyla of the domain bacteria proposed initially on the basis of 16S rRNA gene sequence analysis. It consists of a core of phyla Planctomycetes, Verrucomicrobia and Chlamydiae, but several other phyla have been considered to be members, including phylum Lentisphaerae and several other phyla consisting only of yet-to-be cultured members. The genomics-based links between Planctomycetes, Verrucomicrobia and Chlamydiae have been recently strengthened, but there appear to be other features which may confirm the relationship at least of Planctomycetes, Verrucomicrobia and Lentisphaerae. Remarkably these include the unique planctomycetal compartmentalized cell plan differing from the cell organization typical for bacteria. Such a shared cell plan suggests that the common ancestor of the PVC superphylum members may also have been compartmentalized, suggesting this is an evolutionarily homologous feature at least within the superphylum. Both the PVC endomembranes and the eukaryote-homologous membrane-coating MC proteins linked to endocytosis ability in Gemmata obscuriglobus and shared by PVC members suggest such homology may extend beyond the bacteria to the Eukarya. If so, either our definition of bacteria may have to change or PVC members admitted to be exceptions. The cases for and against considering the PVC superphylum members as exceptions to the bacteria are discussed, and arguments for them as exceptions presented. Recent critical analysis has favoured convergence and analogy for explaining eukaryote-like features in planctomycetes and other PVC organisms. The case is made for constructing hypotheses leaving the possibility of homology and evolutionary links to eukaryote features open. As the case of discovery of endocytosis-like protein uptake in planctomycetes has suggested, this may prove a strong basis for the immediate future of experimental research programs in the PVC scientific community.

  4. Hoechst and Wacker plan joint venture in PVC

    Energy Technology Data Exchange (ETDEWEB)

    Young, I.

    1992-12-02

    Restructuring of Europe's petrochemical industry has taken a further step with the announcement that Hoechst (Frankfurt) and Wacker Chemie (Munich) are planning a joint venture in polyvinyl chloride (PVC). The venture would include production, R D, sales and marketing, plus both companies' PVC recycling activities. However, their vinyl chloride monomer (VCM) plants, and Hoechst's Kalle PVC film business, have been left out. Erich Schnitzler, head of Hoechst's PVC business unit, does not anticipate problems with the European Community's competition directorate. We are both among the middle-sized European PVC producers, and together we would have a 9%-10% market share. Our joint venture would not limit competition. Both partners are hoping for approval from Brussels in first-quarter 1993. Hoechst has 255,000 m.t./year of PVC capacity at Gendorfand Knapsack, while Wacker has 365,000 m.t./year at Burghausen and Cologne. All the units, except Wacker's Cologne plant, are back integrated to VCM. The joint venture would buy VCM from the two parent companies and on the merchant market.

  5. Hoechst and Wacker plan joint venture in PVC

    International Nuclear Information System (INIS)

    Young, I.

    1992-01-01

    Restructuring of Europe's petrochemical industry has taken a further step with the announcement that Hoechst (Frankfurt) and Wacker Chemie (Munich) are planning a joint venture in polyvinyl chloride (PVC). The venture would include production, R ampersand D, sales and marketing, plus both companies' PVC recycling activities. However, their vinyl chloride monomer (VCM) plants, and Hoechst's Kalle PVC film business, have been left out. Erich Schnitzler, head of Hoechst's PVC business unit, does not anticipate problems with the European Community's competition directorate. We are both among the middle-sized European PVC producers, and together we would have a 9%-10% market share. Our joint venture would not limit competition. Both partners are hoping for approval from Brussels in first-quarter 1993. Hoechst has 255,000 m.t./year of PVC capacity at Gendorfand Knapsack, while Wacker has 365,000 m.t./year at Burghausen and Cologne. All the units, except Wacker's Cologne plant, are back integrated to VCM. The joint venture would buy VCM from the two parent companies and on the merchant market

  6. PET and PVC Separation with Hyperspectral Imagery

    Directory of Open Access Journals (Sweden)

    Monica Moroni

    2015-01-01

    Full Text Available Traditional plants for plastic separation in homogeneous products employ material physical properties (for instance density. Due to the small intervals of variability of different polymer properties, the output quality may not be adequate. Sensing technologies based on hyperspectral imaging have been introduced in order to classify materials and to increase the quality of recycled products, which have to comply with specific standards determined by industrial applications. This paper presents the results of the characterization of two different plastic polymers—polyethylene terephthalate (PET and polyvinyl chloride (PVC—in different phases of their life cycle (primary raw materials, urban and urban-assimilated waste and secondary raw materials to show the contribution of hyperspectral sensors in the field of material recycling. This is accomplished via near-infrared (900–1700 nm reflectance spectra extracted from hyperspectral images acquired with a two-linear-spectrometer apparatus. Results have shown that a rapid and reliable identification of PET and PVC can be achieved by using a simple two near-infrared wavelength operator coupled to an analysis of reflectance spectra. This resulted in 100% classification accuracy. A sensor based on this identification method appears suitable and inexpensive to build and provides the necessary speed and performance required by the recycling industry.

  7. Enhancement of the thermo-mechanical properties and efficacy of mixing technique in the preparation of graphene/PVC nanocomposites compared to carbon nanotubes/PVC

    OpenAIRE

    Hasan, Mudassir; Lee, Moonyong

    2014-01-01

    Thin films of poly vinyl chloride (PVC)/multiwalled carbon nanotubes (MWCNT) and PVC/graphene (GN) nanocomposites were prepared by mixing in the presence of different quantities of nanoparticles. Film casting was performed using tetrahydrofuran as a solvent. The as-prepared PVC/MWCNT and PVC/GN nanocomposites were characterized by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and...

  8. 36 CFR 1192.127 - Sleeping compartments.

    Science.gov (United States)

    2010-07-01

    ... compartment. (c) Controls and operating mechanisms (e.g., heating and air conditioning controls, lighting... Intercity Rail Cars and Systems § 1192.127 Sleeping compartments. (a) Sleeping compartments required to be...

  9. Molecular structural changes of plasticized PVC after UV light exposure.

    Science.gov (United States)

    Hankett, Jeanne M; Collin, William R; Chen, Zhan

    2013-12-19

    Plasticized poly(vinyl chloride) (PVC) materials for industrial, medical, and household use are often intentionally exposed to UV light, though its impact on the molecular integrity and toxicity of the surface and bulk of PVC materials is still not well understood. This paper investigates the surface and bulk molecular changes of plasticized PVC films with 25, 10, or 0 wt % bis-2-ethylhexyl phthalate (DEHP) plasticizer after exposure to short wave (254 nm) or long wave (365 nm) UV light. Surface analytical techniques including sum frequency generation vibrational spectroscopy (SFG) revealed short wave UV exposure induced major molecular changes on the plasticized PVC surfaces, resulting in increased surface hydrophilicity and decreased CH3 content with increasing exposure time. Additionally, it was deduced from multiple techniques that the surface and the bulk of the plastic exposed to short wave UV contained phthalic monoesters and phthalic acid formed from multistep radical reactions. In contrast, when exposed to long wave UV, molecular content and ordering on the surfaces of the plastic remained relatively unchanged and the introduction of DEHP in plastic helped protect PVC chains from degradation. Results from this study demonstrate short wave UV exposure will result in plastic surfaces containing phthalates and phthalate-related products accessible to contact by living organisms.

  10. Recycling of PVC Waste via Environmental Friendly Vapor Treatment

    Science.gov (United States)

    Cui, Xin; Jin, Fangming; Zhang, Guangyi; Duan, Xiaokun

    2010-11-01

    This paper focused on the dechlorination of polyvinyl chloride (PVC), a plastic which is widely used in the human life and thereby is leading to serious "white pollution", via vapor treatment process to recycle PVC wastes. In the process, HCl emitted was captured into water solution to avoid hazardous gas pollution and corruption, and remaining polymers free of chlorine could be thermally degraded for further energy recovery. Optimal conditions for the dechlorination of PVC using vapor treatment was investigated, and economic feasibility of this method was also analyzed based on the experimental data. The results showed that the efficiency of dechlorination increased as the temperature increased from 200° C to 250° C, and the rate of dechlorination up to 100% was obtained at the temperature near 250° C. Meanwhile, about 12% of total organic carbon was detected in water solution, which indicated that PVC was slightly degraded in this process. The main products in solution were identified to be acetone, benzene and toluene. In addition, the effects of alkali catalysis on dechlorination were also studied in this paper, and it showed that alkali could not improve the efficiency of the dechlorination of PVC.

  11. Materials Selection, Synthesis, and Dielectrical Properties of PVC Nanocomposites

    Directory of Open Access Journals (Sweden)

    Youssef Mobarak

    2013-01-01

    Full Text Available Materials selection process for electrical insulation application was carried out using Cambridge Engineering Selector (CES program. Melt mixing technique was applied to prepare polyvinyl-chloride- (PVC- nanofumed silica and nanomontmorillonite clay composites. Surface analysis and particles dispersibility were examined using scanning electron microscope. Dielectrical properties were assessed using Hipot tester. An experimental work for dielectric loss of the nanocomposite materials has been investigated in a frequency range of 10 Hz–50 kHz. The initial results using CES program showed that microparticles of silica and clay can improve electrical insulation properties and modulus of elasticity of PVC. Nano-montmorillonite clay composites were synthesized and characterized. Experimental analyses displayed that trapping properties of matrix are highly modified by the presence of nanofillers. The nanofumed silica and nanoclay particles were dispersed homogenously in PVC up to 10% wt/wt. Dielectric loss tangent constant of PVC-nanoclay composites was decreased successfully from 0.57 to 0.5 at 100 Hz using fillers loading from 1% to 10% wt/wt, respectively. Nano-fumed silica showed a significant influence on the electrical resistivity of PVC by enhancing it up to 1 × 1011 Ohm·m.

  12. Effect of radiation on Poly Vinyl chloride (PVC)

    International Nuclear Information System (INIS)

    Massaud, F.; Haraga, S.; Benfaid, N.; Benayad, S.; Kabar, Y.; Elmesmary, Y; Elwerfeli, M.; Omran, Sh.

    1993-01-01

    Radiation crosslinking of polymeric materials is of increasing commercial importance because of the improved thermal, electrical and mechanical properties. Poly Vinylchloride (PVC) is one of the most important polymers. Many attempts were made to study the primary reactions induced by the direct effect of radiation on PVC. In this study, powder PVC was irradiated with different doses at ambient temperature. Formation of free radicals was investigated by electron spin resonance (ESR) method and molecular weight was determined by viscosity measurements. It has been observed that hydrogen chloride was evolved because of noticeable change in color. One type of radical, Poly enyl structure was trapped at room temperature. The non-symmetric singlet structure of the ESR spectra is due to the presence of oxygen. The radical concentration increased with increase of dose. The molecular weight of irradiated PVC was found to be inversely proportional to the increase of radiation dose, which is believed to be due to the occurrence of degradation. It can be concluded that gamma radiation will be the best method for crosslinking of PVC if multi-functional groups or monomers are present. (author)

  13. Dual-Compartment Inflatable Suitlock

    Science.gov (United States)

    Kennedy, Kriss J.; Guirgis, Peggy L.; Boyle, Robert M.

    2013-01-01

    There is a need for an improvement over current NASA Extravehicular Activity (EVA) technology. The technology must allow the capacity for quicker, more efficient egress/ingress, allow for shirtsleeve suit maintenance, be compact in transport, and be applicable to environments ranging from planetary surface (partial-g) to orbital or deep space zero-g environments. The technology must also be resistant to dust and other foreign contaminants that may be present on or around a planetary surface. The technology should be portable, and be capable of docking with a variety of habitats, ports, stations, vehicles, and other pressurized modules. The Dual-Compartment Inflatable Suitlock (DCIS) consists of three hard inline bulkheads, separating two cylindrical membrane-walled compartments. The Inner Bulkhead can be fitted with a variety of hatch types, docking flanges, and mating hardware, such as the Common Berthing Mechanism (CBM), for the purpose of mating with vehicles, habitats, and other pressurized modules. The Inner Bulkhead and Center Bulkhead function as the end walls of the Inner Compartment, which during operations, would stay pressurized, either matching the pressure of the habitat or acting as a lower-pressure transitional volume. The Inner Compartment contains donning/doffing fixtures and inner suit-port hatches. The Center Bulkhead has two integrated suit-ports along with a maintenance hatch. The Center Bulkhead and Outer Bulkhead function as the end walls of the Outer Compartment, which stays at vacuum during normal operations. This allows the crewmember to quickly don a suit, and egress the suitlock without waiting for the Outer Compartment to depressurize. The Outer Compartment can be pressurized infrequently for both nominal and off-nominal suit maintenance tasks, allowing shirtsleeve inspections and maintenance/repair of the environmental suits. The Outer Bulkhead has a pressure-assisted hatch door that stays open and stowed during EVA operations, but can

  14. Erfaringer med substitution af PVC ved renere teknologi og brancheaftaler

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    Rapporten gennemgår den danske debat om PVC og de miljøpolitiske tiltag, der har været gennemført. Et survey i danske plastvirksomheder gennemført i projektet viser, at industrien er forberedt på at gennemføre en omfattende substitution af PVC, hvis der stilles politisk krav om det eller markedet...... efterspørger det. Til gengæld viser brancheaftalerne sig at være et svagt instrument og der peges på et behov for en opfølgning af de gode resultater, der er opnået med substitution af PVC i en række renere teknologi projekter, som har fået statslig støtte....

  15. Strain rate dependence in plasticized and un-plasticized PVC

    Directory of Open Access Journals (Sweden)

    Siviour C.R.

    2012-08-01

    Full Text Available An experimental and analytical investigation has been made into the mechanical behaviour of two poly (vinyl chloride (PVC polymers – an un-plasticized PVC and a diisononyl phthalate (DINP-plasticized PVC. Measurements of the compressive stress-strain behaviour of the PVCs at strain rates ranging from 10−3 to 103s−1 and temperatures from − 60 to 100∘C are presented. Dynamic Mechanical Analysis was also performed in order to understand the material transitions observed in compression testing as the strain rate is increased. This investigation develops a better understanding of the interplay between the temperature dependence and rate dependence of polymers, with a focus on locating the temperature and rate-dependent material transitions that occur during high rate testing.

  16. Improvement of PVC floor tiles by gamma radiation

    International Nuclear Information System (INIS)

    Plessis, T.A. du; Badenhorst, F.

    1988-01-01

    Gamma radiation presents a unique method of transforming highly plasticized PVC floor tiles, manufactured at high speed through injection moulding, into a high quality floor covering at a cost at least 30% less than similarly rated rubber tiles. A specially formulated PVC compound was developed in collaboration with a leading manufacturer of floor tiles. These tiles are gamma crosslinked in its shipping cartons to form a dimensionally stable product which is highly fire resistant and inert to most chemicals and solvents. These crosslinked tiles are more flexible than the highly filled conventional PVC floor tiles, scratch resistant and have a longer lifespan and increased colour fastness. These tiles are also less expensive to install than conventional rubber tiles. (author)

  17. Evaluation of tacrolimus sorption to PVC- and non-PVC-based tubes in administration sets: Pump method vs. drip method.

    Science.gov (United States)

    Jin, Su-Eon; Jeon, Seungho; Byon, Hyo-Jin; Hwang, Sung-Joo

    2017-08-07

    Tacrolimus sorption to tubes was evaluated using pump and drip methods For tubes, polyvinylchloride (PVC)- and non-PVC-based (polyurethane [PU] and polyolefin [PO]) tubes were used. First, inner surface properties of tubes were analyzed using field emission scanning electron microscopy and X-ray photoelectron spectroscopy. Tacrolimus was quantitatively analyzed using high-performance liquid chromatography with UV detection. For kinetic sorption analysis, diluted tacrolimus to 10μg/mL was passed through 1-m-long tubes at 10mL/h. Samples were collected at 1-4h. The inner surface of PO-based tubes was relatively smooth and soft compared with those of PVC- and PU-based tubes. Atomic compositions of tubes matched chemical formulas of polymers excluding low-level impurity in PVC-based tubes. Tacrolimus was successfully analyzed and linearly determined at 2.5-20μg/mL. From both methods, PVC- and PO-based tubes exhibited the highest and the lowest (<10%) sorption levels to tacrolimus, respectively. Tacrolimus was stably delivered using the pump method. Results suggested that the pump method can estimate tacrolimus sorption in administration set tubes and evaluate other sorptional drugs used at low concentrations. PO-based tubes also have promising potential as an alternative for administration set tubes. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. PVC removal from mixed plastics by triboelectrostatic separation

    International Nuclear Information System (INIS)

    Park, Chul-Hyun; Jeon, Ho-Seok; Park, Jai-Koo

    2007-01-01

    Ever increasing oil price and the constant growth in generation of waste plastics stimulate a research on material separation for recycling of waste plastics. At present, most waste plastics cause serious environmental problems due to the disposal by reclamation and incineration. Particularly, polyvinyl chloride (PVC) materials among waste plastics generates hazardous HCl gas, dioxins containing Cl, and so on, which lead to air pollution and shorten the life of incinerator, and it makes difficultly recycling of other plastics. Therefore, we designed a bench scale triboelectrostatic separator for PVC removal from mixed plastics (polyvinyl chloride/polyethylene terephthalate), and then carried out material separation tests. In triboelectrostatic separation, PVC and PET particles are charged negatively and positively, respectively, due to the difference of the work function of plastics in tribo charger of the fluidized-bed, and are separated by means of splitter through an opposite electric field. In this study, the charge efficiency of PVC and PET was strongly dependent on the tribo charger material (polypropylene), relative humidity (below 30%), air velocity (over 10 m/s), and mixture ratio (PET:PVC = 1:1). At the optimum conditions (electrode potential of 20 kV and splitter position of -2 cm), PVC rejection and PET recovery in PET products were 99.60 and 98.10%, respectively, and the reproducibility of optimal test was very good (±1%). In addition, as a change of splitter position, we developed the technique to recover high purity PET (over 99.99%) although PET recovery decreases by degrees

  19. The Entire Nucleotide Sequence of Friend-Related and Paralysis-Inducing PVC-441 Murine Leukemia Virus (MuLV) and Its Comparison with Those of PVC-211 MuLV and Friend MuLV

    OpenAIRE

    Tanaka, Atsushi; Oka, Kiyomasa; Tanaka, Keiji; Jinno, Atsushi; Ruscetti, Sandra K.; Kai, Kazushige

    1998-01-01

    PVC-441 murine leukemia virus (MuLV) is a member of the PVC group of Friend MuLV (F-MuLV)-derived neuropathogenic retroviruses. In order to determine the molecular basis for the difference in neuropathogenicity between PVC-441 and the previously characterized PVC-211 MuLVs, the entire nucleotide sequence of PVC-441 MuLV was determined and compared with those of PVC-211 and F-MuLV. The results suggest that PVC-441 and PVC-211 MuLVs were formed as a result of random mutations of F-MuLV and deve...

  20. PVC Cable Fire Toxicity using the Cone Calorimeter

    OpenAIRE

    Al-Sayegh, WA; Aljumaiah, O; Andrews, GE; Phylaktou, HN

    2017-01-01

    Electrical cables with PVC sheaths were investigated for their ignition characteristics, heat release and toxic yields using the cone calorimeter. 40 KW/m² was required to get a significant heat release for PVC. A heated Temet Gasmet FTIR was used for the toxic gas analysis. Gas samples were taken from the cone calorimeter diluted exhaust duct and transferred to the FTIR using a 190°C heated sample line, heated pump and filter and a second 190°C heated sample line between the pump and the FTI...

  1. Residual lifetime assessment of uPVC gas pipes

    OpenAIRE

    Visser, HA

    2010-01-01

    The Dutch gas distribution network consists of about 20% (22,500 km) of unplasticised poly(vinyl chloride) (uPVC) pipes, most of which have been installed from the mid-sixties up to the mid-seventies of the previous century and have been in service ever since. Replacing the uPVC gas pipes exactly after the specified service lifetime of 50 years will lead to a costly and extremely labour intensive project in the next decade. Postponing the replacement is only an option when it can be done with...

  2. Phthalate release from soft PVC baby toys, Report from the Dutch Consensus Group

    NARCIS (Netherlands)

    Konemann WH; RIVM/CSR

    1998-01-01

    Op verzoek van de staatssecretaris van Volksgezondheid, Welzijn en Sport, heeft een werkgroep van vertegenwoordigers van betrokken partijen de afgifte van ftalaten uit zacht PVC babyspeelgoed onderzocht. Omdat di-isononylftalaat (DINP) veruit de meest gebruikte weekmaker in PVC babyspeelgoed

  3. Predicting the Migration Rate of Dialkyl Organotins from PVC Pipe into Water

    Science.gov (United States)

    Organotins (OTs) are additives widely used as thermal and light stabilizers in polyvinyl chloride (PVC) plastics. OTs can leach into water flowing through PVC pipes. This work examines the leaching rates of two neurotoxic OTs, dimethyl tin (DMT) and dibutyl tin (DBT), from PVC pi...

  4. PVC-MEMBRANE POTENTIOMETRIC SENSORS BASED ON A ...

    African Journals Online (AJOL)

    Preferred Customer

    ethylimino)-1,3-dihydro-indol-. 2-one (DEDIO) as an ionophore in poly(vinyl chloride) (PVC) matrix, is reported. The plasticized membrane sensor exhibits a Nernstian response for Fe(III) ions over a wide concentration range (2.0 × 10-6 - 5.0 ...

  5. Properties of irradiated PVC plasticized with non-endocrine disruptor

    Energy Technology Data Exchange (ETDEWEB)

    Hutzler, B.W.; Machado, L.D.B.; Lugao, A.B. E-mail: ablugao@net.ipen.br; Villavicencio, A.L.C.H

    2000-03-01

    Polyvinylchloride (PVC) is under heavy attack from environmentalist groups due to the use of plasticizers and its recycling difficulties. Chloro-organics and phtalates are considered now as ubiquitous global contaminants due to their potential as weak endocrine disruptor and huge consumption. In order to make PVC acceptable for the irradiation processing industry in the long term, non-toxic plasticizers should be used. PVC was added with dioctyl phtalate (DOP) and epoxy soybean oil (ESO) and irradiated up to 50 kGy. Mechanical properties, optical properties and viscosity were measured and compared. The elongation and mechanical strength were under the usual range and they didn't show any significant change in the studied range of irradiation dose. All the samples showed a weak yellowing effect after irradiation and the molecular weight measured by viscosimetry showed only negligible changes. In conclusion, DOP and ESO were shown to be effective in stabilizing the radiolytic abstraction of HCl from PVC. Both plasticizers imparted good color stability and overall properties to the products.

  6. Cyclic Voltammetry of Biopolymer Heparin at PVC Plasticized Liquid Membrane

    Czech Academy of Sciences Publication Activity Database

    Samec, Zdeněk; Trojánek, Antonín; Langmaier, Jan; Samcová, E.

    2003-01-01

    Roč. 5, - (2003), s. 867-870 ISSN 1388-2481 R&D Projects: GA ČR GA203/04/0424 Institutional research plan: CEZ:AV0Z4040901 Keywords : cyclic voltammetry * PVC plasticized liquit membrane * heparin Subject RIV: CG - Electrochemistry Impact factor: 2.300, year: 2003

  7. Properties of Commercial PVC Films with Respect to Electron Dosimetry

    DEFF Research Database (Denmark)

    Miller, Arne; Liqing, Xie

    The properties of three commercially available polyvinyl chloride (PVC) film supplies and one made without additives were tested with respect to their application as routine dose monitors at electron accelerators. Dose fractionation was found to increase the response and the post-irradiation heat...

  8. Dechlorination of PVC wastes by hydrothermal treatment using alkaline additives.

    Science.gov (United States)

    Zhao, Peitao; Li, Tian; Yan, Weijie; Yuan, Longji

    2018-04-01

    Some chemicals were usually utilized in the hydrothermal dechlorination (HTD) of chlorine-containing wastes without revealing their roles. This work intends to investigate the role of chemical additives in the HTD of PVC (polyvinyl chloride). Several chemicals, including Na 2 CO 3 , KOH, NaOH, NH 3 ·H 2 O, CaO and NaHCO 3 , were added into the PVC HTD process, which was conducted in subcritical Ni 2+ -containing water at 220°C for 30 min. The results show the alkalinity of additives had notable effects on the dechlorination efficiency (DE) of PVC due to the neutralization between HCl and additives. The most effective additive is Na 2 CO 3 , with the maximum DE of 65.12% at a Na 2 CO 3 concentration of 0.025 M in this study. According to SEM, the hydrochar obtained from the HTD with Na 2 CO 3 become more porous and looser than the others did, which contributed to the acceleration of PVC dechlorination. The DE vibration with the concentration of additives was different. For Na 2 CO 3 , it was firstly increased and then decreased with Na 2 CO 3 concentration increasing from 0.01 to 0.04 M. For KOH and NaOH, it kept reducing with the concentration increasing from 0.02 to 0.08 M. The drop in DE was ascribed to surface poisoning and a loss in the supported active phase resulting from the formation of metal chloride species. FTIR analysis shows that the elimination of hydrogen chloride was the main route for HTD of PVC. All the results provide some fundamental data to find some cheap but efficient chemicals with aim to recycle the chlorinated organic wastes effectively.

  9. Click grafting of seaweed polysaccharides onto PVC surfaces using an ionic liquid as solvent and catalyst.

    Science.gov (United States)

    Bigot, Sandra; Louarn, Guy; Kébir, Nasreddine; Burel, Fabrice

    2013-11-06

    Seaweed antibacterial polysaccharides were grafted onto poly(vinylchloride) (PVC) surfaces using an original click chemistry pathway. PVC isothiocyanate surfaces (PVC-NCS) were first prepared by nucleophilic substitution of the chloride groups by isothiocyanate groups in DMSO/water medium. Then, unmodified Ulvan, Fucan, Laminarin or Zosterin was directly grafted onto the PVC-NCS surface using 1-ethyl-3-methyl imidazolium phosphate, an ionic liquid, as solvent and catalyst. To attest the grafting effectiveness, the new PVC surfaces were well characterized by AFM, XPS and contact angle measurements. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Reduction of thrombogenicity of PVC-based sodium selective membrane electrodes using heparin-modified chitosan.

    Science.gov (United States)

    Badr, Ibrahim H A; Gouda, M; Abdel-Sattar, R; Sayour, Hossam E M

    2014-01-01

    Heparin-modified chitosan (H-chitosan) membrane was utilized to enhance biocompatibility of sodium selective membrane electrode based on the highly thrombogenic polyvinyl chloride (PVC). Sodium ion sensing film was prepared using PVC, sodium ionophore-X, potassium tetrakis(chlorophenyl)-borate, and o-nitrophenyloctylether. The PVC-based sensing film was sandwiched to chitosan or H-chitosan to prevent platelet adhesion on the surface of PVC. Potentiometric response characteristics of PVC-chitosan and PVC-H-chitosan membrane electrodes were found to be comparable to that of a control PVC based sodium-selective electrode. This indicates that chitosan and H-chitosan layers do not alter the response behaviour of the PVC-based sensing film. Biocompatibility of H-chitosan was confirmed by in vitro platelet adhesion study. The platelet adhesion investigations indicated that H-chitosan film is less thrombogenic compared to PVC, which could result in enhancement of biocompatibility of sodium selective membrane electrodes based on PVC, while maintaining the overall electrochemical performance of the PVC-based sensing film. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Imaging of iliopsoas compartment disease

    International Nuclear Information System (INIS)

    Rocher, L.; Saint Maurice, J.P.; Le Quen, O.; Bazille, A.; Miquel, A.; Frouge, C.; Blery, M.

    1997-01-01

    Infection, neoplastic involvement, and hemorrhage, are the most frequent pathologies that involve the ilio-psoas compartment. The extension from contiguous pathological structures and particularly digestive and urological organs, are often the origin of abscess formation or malignant tumours. The radiological findings including ultrasonography, CT, and magnetic resonance imaging, show a low specificity, which improves if the clinical history is known. The final diagnosis is confirmed by puncture or biopsy. (author)

  12. Numerical treatment of compartment models

    International Nuclear Information System (INIS)

    Einarsson, B.

    1984-11-01

    This report describes and interactive program RADIO (Radioactive Decay Information Online) for studying the radioactive decay process, with applications to many ecological problems, but not necessarily involving radioactive processes. Starting with the compartment coefficients and initial values of the various compartments the problem is solved as a system of linear ordinary differential equations. The method of solution is the direct use of matrix exponentials or the backward differences method. A program INVERS is also available for the solution of the inverse problem, that is parameter estimation in a system of linear ordinary differential equations when the solution is available pointwise. The output can be printed on a line printer either from a result file or from the plot file, which of course also can be used to produce graphic output. The plot file is processed by the plotting program VISION or by the auxiliary printing program RADAR. Another file can be used for a later restart from the point of time where the previous computation was aborted or from an arbitrary point of time if the relevant starting information is available. This is useful in order to avoid the manual input of a compartment matrix if it is similar to one used before. When the program RADIO is run the user answers to the question asked by the program. The programs are written in Fortran 77 for the Digital Equipment VAX 11 with graphical presentation on a Tektronix 4010, and are available from the author. (Author)

  13. Control system maintains compartment at constant temperature

    Science.gov (United States)

    Lindberg, J. G.

    1966-01-01

    Gas-filled permeable insulating material maintains an enclosed compartment at a uniform temperature. The material is interposed between the two walls of a double-walled enclosure surrounding the compartment.

  14. volkmann's ischaemic contracture following acute compartment

    African Journals Online (AJOL)

    2006-06-02

    Jun 2, 2006 ... Compartment syndrome most commonly involves the forearm and lower leg. Acute compartment syndrome refers to acute ischaemia of the muscles and nerves within a compartment due to elevated intra-compartmental pressure. In 1881 Volkmann stated that the paralytic contractures that could develop in ...

  15. 24 CFR 3280.111 - Toilet compartments.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Toilet compartments. 3280.111... Toilet compartments. Each toilet compartment shall be a minimum of 30 inches in width, except, when the toilet is located adjacent to the short dimension of the tub, the distance from the tub to the center...

  16. DEHA-plasticized PVC for retail packaging of fresh meat

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Naamansen, Ebbe Tubæk

    1998-01-01

    A selection of frequently consumed meat products were packed in two commercial types of plasticized PVC film with declared plasticizer compositions of 11 and 21% di-(ethylhexyl)adipate (DEHA), respectively. The meat products were analysed for DEHA after packaging and storage until their "use by...... temperature and/or repeated repackaging with new film during treatment gave rise to the greatest amount of DEHA migration from the film into the meat. No significant differences in DEHA migration could be seen when comparing the two films, although they were quite different in terms of plasticizer composition....... The DEHA concentration at the "use by" date in fresh lean trimmings and slices of pork leg was 1-2 mg/kg, whereas neck and strip loin with some fat at the surface contained about 5-10 mg/kg. More fatty types of meat such as minced beef and pork with 18-20% fat, packaged once in plasticized PVC, contained...

  17. Experimental Investigations on Combustion Behaviors of Live PVC Cables

    Science.gov (United States)

    Wang, Liufang; Zhang, Jiaqing; Zhang, Bosi; Liu, Min; Fan, Minghao; Li, Qiang

    2018-03-01

    This paper investigated the combustion behaviors of live PVC cables with overload currents experimentally. The smoke coefficient of released smoke and the released gas concentration were examined. The results indicate that the combustion of live PVC cables can be divided into four stages, i.e., core exposed with a little smoke, obvious flame, maximum smoke and smoke depress. For most cases, using blue laser is better than using rad laser, since the extinction coefficient of the rad laser was larger than that of the blue laser. The response time of the detection of the released typical gases due to cable pyrolysis decreased and the peak values of the typical gases increased with the overload currents. In addition, the time to reach the peak value of gas concentration also decreased with the overload currents.

  18. Processing and Properties of Carbon Nanotube PVC Composites

    Directory of Open Access Journals (Sweden)

    Kristin Trommer

    2014-01-01

    Full Text Available Commercially available multiwalled carbon nanotubes (MWCNT were incorporated in coating masses based on PVC by means of three roll mill. The best results could be obtained using the 5 µm gap. Thin PVC sheets were formed via knife coating having an electrical conductivity up to 1,500 S/m that are applicable as electric heating elements. For the use in the antistatic range, CNT contents ≤0.5% are sufficient. Rheological measurements indicate the quality of particle processing. AFM investigations are suitable to investigate the alignment of the nanoparticles in the bulk polymer. Using this method, the decrease of agglomerates as well as the splitting of CNT bundles within further mass processing could be visualized.

  19. Selective flotation of PVC using gelatin and lignin alkali.

    Science.gov (United States)

    Yenial, Unzile; Kangal, Olgaç; Güney, Ali

    2013-06-01

    Recycling has become one of the most important issues as a result of increasing waste mass in present day. This is especially important for polymer wastes as they are hard to degenerate in nature. Today, most of the practical methods used for the recycling of waste mass, such as hand sorting, gravity separation, etc., cannot be performed successfully owing to close densities of polymers. Froth flotation can be used successfully and economically for this purpose. The main objective of this study was to investigate the effect of plasticizer reagents and the success of froth flotation at plastic recycling. In this study, lignin alkali and gelatin were used as plasticizer reagents. The effect of these reagents was searched with the parameters of pH, concentration, conditioning and flotation time. In the case of post-consumed polyethylene terephthalate and polyvinyl chloride (PVC), 98.9% purity of PVC was obtained at optimum conditions.

  20. New plasticizers for PVC-compositions in construction

    Directory of Open Access Journals (Sweden)

    MAZITOVA Aliya Karamovna

    2017-08-01

    Full Text Available The work is devoted to the analysis and development of effective types of plasticizers for a wide range of finishing (linoleum and insulating building materials (insulation tape, cable plastic with improved mechanical and technical characteristics. In connection with the growth of consumption of finishing and insulating materials, the development of new formulations of PVC compositions for construction with the use of new plasticizers is not only an urgent task, but also within the framework of construction it allows solving the problems of effective quality control of a finished PVC composition. This paper presents the results of the tests of ctylphenoxyethylphtalates as a new chemical additivies for plasticizing PVC in the formulation of the upper and middle layers of linoleum, adhesive film and cable compound О-40 rec. ОМ-40 (black. It is noted, that obtained samples of adhesive tape with their main characteristics (tensile strength at break, extension coefficient, shatter point, thermostability correspond to technical specification (TS 2245-001-00203312-2003. Obtained samples of plasticate were analyzed according to GOST 5960-72 rev. 1-9 (PVC plasticate for isolation and protective covers of wires and cables, by main characteristics (specific insulation resistance, tensile strength at break, breaking elongation, shatter point are not inferior to commercial prototypes, and such characteristics as «Weight loss at 160о С» and «Water absorption» are significantly lower. It is noted that, in case of using octylphenoxyethyl phtalates, obtained samples of films of upper and middle layers of linoleum analyzed according to norms of STI 00203312-100-2006 have a higher melt flow rate. In addition, films obtained through introduction of suggested plasticizers possess a low value of extractability by gasoline and oils.

  1. Strength analysis of welded corners of PVC window profiles

    Science.gov (United States)

    Postawa, P.; Stachowiak, T.; Gnatowski, A.

    2017-08-01

    The article presents the results of researches which main purpose was to define the influence of welding parameters on strength of welded corners of PVC window profile. PVC profiles of a branded name GENEO® produced by Rehau Company were used for this research. The profiles were made by using a co-extrusion method. The surface of the profile was made of PVC mixture with no additives. Its main task was to get a smooth surface resistant to a smudge. The use of an unfilled polyester provides an aesthetic look and improves the resistance of extrudate to water getting into inner layers. The profile's inner layers have been filled up with glass fibre in order to improve its stiffness and mechanical properties. Window frames with cut corners used for this research, were produced on technological line of EUROCOLOR Company based in Pyskowice (Poland). The main goal of this analysis was to evaluate the influence of the main welding parameter (temperature upsetting) on hardness of welds we received in whole process. A universal testing machine was used for the research.

  2. Organic Heat Stabilizers for Polyvinyl Chloride (PVC): A Synergistic Behavior of Eugenol and Uracil Derivative

    Science.gov (United States)

    Asawakosinchai, Aran; Jubsilp, Chanchira; Mora, Phattarin; Rimdusit, Sarawut

    2017-10-01

    Recycling ability, mechanical, and thermal properties of PVC stabilized with organic heat stabilizers, i.e., uracil (DAU) and eugenol were investigated to substitute PVCs stabilized with commercial lead, Ca/Zn, and organic-based stabilizer for PVC pipe production. PVC stabilized with the DAU and the eugenol can be processable at 30 °C lower than that of the PVC stabilized with commercial heat stabilizers. The most remarkable short-term thermal stability belonged to the PVC stabilized with the DAU, and its original color can be maintained at least up to 3 processing cycles. Synergistic behavior in thermal stability of the PVC mixed with DAU and eugenol at mass ratios of 1.5:1.5 was observed. Mechanical properties of DAU- and eugenol-stabilized PVC were higher than the samples with other heat stabilizers. Glass transition temperature of the PVC stabilized with all heat stabilizers was determined to be 99 °C with the exception of the value of 89 °C for eugenol-stabilized PVC. Therefore, the DAU and the eugenol showed high potential to be used as an organic heat stabilizer for PVC because of their non-toxic and good heat resistance properties.

  3. Evaluation of a new PVC-free catheter material for intermittent catheterization: a prospective, randomized, crossover study.

    Science.gov (United States)

    Johansson, Kerstin; Greis, Gunvor; Johansson, Birgit; Grundtmann, Agneta; Pahlby, Yvonne; Törn, Solveig; Axelberg, Hanna; Carlsson, Petrea

    2013-02-01

    Polyvinyl chloride (PVC) is commonly used as a catheter material in catheters for clean intermittent catheterization (CIC) but, owing mainly to environmental concerns, a PVC-free material has been proposed. The objective of this study was to compare patients' tolerability for catheters made of PVC and a newly developed PVC-free material. This was a prospective, randomized, crossover study in 104 male patients with maintained urethra sensibility who practised CIC. The patients evaluated in a randomized order a PVC and a PVC-free LoFric® catheter after 1 week's use of each. The material properties and tolerability, i.e. reported perceived discomfort, of each catheter were compared and adverse events documented. Twenty-nine (28%) and 15 (14%) patients reported discomfort when using the PVC catheter and the PVC-free LoFric catheter, respectively. A comparison showed that five patients (5%) reported discomfort with the PVC-free and not with the PVC catheter, and 19 patients (18%) reported discomfort with the PVC and not with the PVC-free catheter (p = 0.0066). Forty patients reported a total of 91 adverse events, of which the most common were discomfort in terms of pain, a burning sensation and bleeding. Generally low discomfort rates were reported in the study population, suggesting a high tolerance for CIC with catheters of both the PVC and the PVC-free materials. The lowest discomfort was, however, found when CIC was performed using the PVC-free LoFric catheter.

  4. [Acroosteolysis in PVC autoclave cleaners: history of an occupational disease].

    Science.gov (United States)

    Zocchetti, C; Osculati, A; Colosio, C

    2010-01-01

    This paper examines the history of an occupational disease which has now disappeared: acroosteolysis of manual tank cleaners in the production of polyvinyl chloride (PVC), which is a rare disease characterized by destructive alterations of the distal phalanges of the hands. All the available literature on this disease was examined. The history of acroosteolysis was studied within the general framework of the history of the discovery of adverse health effects of exposure to vinyl chloride, and this history was studied up to the end of the 1960's. The disease was observed for the first time in mid-1963 in Belgium (Jemeppe) in a chemical plant operated by Solvay, and affected two workers whose job was the manual cleaning of vessels used for the polymerization of vinyl chloride; similar cases occurred in almost all PVC production plants all over the world, but not in the plants where the main activity was the production of vinyl chloride monomer (VCM). Little more than one hundred cases are described in the scientific literature, and this number increases by a few dozen if we consider known but unpublished cases. These figures confirm the rarity of the disease, which peaked at the end of the 1960's and disappeared during the 1970's, probably due to the complete elimination of manual reactor cleaning. Observation of the disease lasted no more than fifteen years and the disease was not replicated in experimental conditions on animals. The disease was clinically characterized, had a short latency (from several months to several years), was rare and unequivocally linked to the manual cleaning of PVC polymerization tanks. However many questions still remain open: the period when the disease first appeared (many years after the start of PVC production in the world), the etiology of the disease (the most accredited hypothesis considers three concomitant factors: a chemical factor--one of the many substances used during polymerization, and particularly vinyl chloride monomer

  5. TG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS.

    Science.gov (United States)

    Wu, Jingli; Chen, Tianju; Luo, Xitao; Han, Dezhi; Wang, Zhiqi; Wu, Jinhu

    2014-03-01

    The pyrolysis and co-pyrolysis behaviors of polyethylene (PE), polystyrene (PS) and polyvinyl chloride (PVC) under N2 atmosphere were analyzed by Thermal gravimetric/Fourier transform infrared (TG/FTIR). The volatile products were analyzed to investigate the interaction of the plastic blends during the thermal decomposition process. The TGA results showed that the thermal stability increased followed by PVC, PS and PE. The pyrolysis process of PE was enhanced when mixed with PS. However, PS was postponed when mixed with PVC. As for PE and PVC, mutual block was happened when mixed together. The FTIR results showed that the free radical of the decomposition could combine into a stable compound. When PE mixed with PVC or PS, large amount of unsaturated hydrocarbon groups existed in products while the content of alkynes was decreased. The methyl (-CH3) and methylene (-CH2-) bonds were disappeared while PVC mixed with PE. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  6. Nondestructive Quantification of Local Plasticizer Concentration in PVC by (1)H NMR Relaxometry.

    Science.gov (United States)

    Adams, Alina; Kwamen, Rance; Woldt, Benjamin; Graß, Michael

    2015-12-01

    The properties of plasticized poly(vinyl chloride) (PVC) , one of the most important polymers today, are strongly dictated by the concentration of plasticizer. Yet, it has been impossible to quantify this concentration at different positions inside a PVC product without its destruction because of a lack of suitable analytical methods. Thus, this paper introduces a simple, fast, and efficient way to determine truly nondestructively the concentration of plasticizer in PVC by single-sided nuclear magnetic resonance (NMR). With the help of correlation curves between the concentration of plasticizer inside nonaged PVC samples and the corresponding volume-averaged NMR parameters, single-sided NMR allows the quantification of the local concentration of plasticizer in aged PVC plates at different depths by spatially resolved relaxation measurements. The presented approach represents a fundamental step toward in situ characterization of plasticized PVC. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Irradiation effects on the mechanical and thermal properties and surface tension of plasticised PVC

    International Nuclear Information System (INIS)

    Bellili, Nadira; Djidjelli, Hocine; Boukerrou, Amar

    2013-01-01

    Irradiation effects on the mechanical and thermal properties and surface tension of plasticised PVC. The mechanical and thermal behavior of 1 mm thick sheets of plasticised PVC after gamma irradiation at doses of 10 and 70 kGy was studied and compared to untreated PVC. The use of gamma irradiation treatment as plasticised PVC induces better mechanical properties, good thermal stability, with an increase in its wettability as compared to untreated PVC. The results showed that gamma irradiation PVC film improved mechanical properties. Young's modulus and tensile strength increased respectively from 297 MPa to 189 and 24 to 28 MPa, respectively, and the ultimate elongation increased from 124 to 154%. The gamma irradiation of the polyvinyl chloride caused significant increase of the surface tension, from 3 mN/m for the unirradiated to 5 to 11 mN/m up to 10 after irradiation at 70 kGy. (authors)

  8. Performance of large diameter polyvinyl chloride (PVC) pipes in water applications

    Science.gov (United States)

    Deshmukh, Pradip P.

    Polyvinyl chloride (PVC) pipes are used in water management utilities to manage safe and efficient water transport. The material's advantages includes strength, flexibility, anti-corrosive properties and easy installation methods. The disadvantages include joint failure, pipe fractures, material contamination and oxidative degradation. This thesis evaluates the use of 24 inch and larger diameter PVC pipes in water management utilities. Center of Undergraduate Infrastructure and Research Education (CUIRE) conducted surveys consisting of questions pertaining to PVC pipe material and installation practices to different water management utilities. While PVC material is most commonly used in pipelines less than 24", the CUIRE responses show that PVC pipes are not the most common type of pipe material in 24" and larger diameters installed in the facilities for various reasons. These reasons are discussed and evaluated in hopes of understanding the material's fallbacks in the piping industry. Finally, future research recommendations are constructed for researchers in the PVC piping industry.

  9. Studies in cross-linking PVC footwear soling compounds using gamma-irradiation

    International Nuclear Information System (INIS)

    Bloom, L.I.

    1983-01-01

    Irradiation cross-linking of polymeric materials has been known for some time, but it is only in recent years that it has been put to commercial advantage. Well known uses are the modification of PVC for higher temperature applications. Fundamental studies were carried out on amongst other materials, plasticised PVC compounds for use in cable applications. The results of this work, encouraged the author to investigate cross-linkable PVC in areas such as footwear soling

  10. Physical Morphology and Quantitative Characterization of Chemical Changes of Weathered PVC/Pine Composites

    Science.gov (United States)

    2009-12-22

    polyvinyl chloride (PVC) based wood plastic composites ( WPC ), with a focus on the color and structure that is attributed to the material composition. It is...occurred by oxidation process. Also, oxidation and lignin (from the wood) degradation influenced the color (light- ness) of PVC based WPC upon weathering...4]. The wood plastic composite ( WPC ) industry accounted for about 7% of the world PVC consumption in 2003 and consumed even higher i.e. 10–13% in 2004

  11. Assessing demineralization treatments for PVC effluent reuse in the resin polymerization step.

    Science.gov (United States)

    Blanco, Laura; Hermosilla, Daphne; Negro, Carlos; Swinnen, Nathalie; Prieto, David; Blanco, Ángeles

    2017-07-01

    To reduce fresh water consumption in a polyvinyl chloride (PVC) plant, the effluent from a biological treatment must be demineralized to be re-used in the resin polymerization process. Demineralization is a critical process, since the quality and the stability of the PVC resins are highly influenced by the water quality used in the process. The main target values for water parameters are the following: conductivity PVC resins in terms of color, granulometry, porosity, and bulk density were obtained when demineralized water from two-pass reverse osmosis was used as fresh water, proving the feasibility of the effluent reuse in the PVC industry.

  12. Left Ventricular Systolic Dysfunction Induced by Ventricular Ectopy: a Novel Model for PVC-induced Cardiomyopathy

    Science.gov (United States)

    Huizar, Jose F.; Kaszala, Karoly; Potfay, Jonathan; Minisi, Anthony J.; Lesnefsky, Edward J.; Abbate, Antonio; Mezzaroma, Eleonora; Chen, Qun; Kukreja, Rakesh C.; Hoke, Nicholas N.; Thacker, Leroy R.; Ellenbogen, Kenneth A.; Wood, Mark A.

    2011-01-01

    Background Premature ventricular contractions (PVCs) commonly coexist with cardiomyopathy. Recently, PVCs have been identified as possible cause of cardiomyopathy. We developed a PVC-induced cardiomyopathy animal model using a novel premature pacing algorithm to assess timeframe and reversibility of this cardiomyopathy and examine the associated histopathological abnormalities. Methods and Results Thirteen mongrel dogs were implanted with a specially programmed pacemaker capable of simulating ventricular extrasystoles. Animals were randomly assigned to either 12 weeks of bigeminal PVCs (n=7) or no PVCs (control, n=6). Continuous 24-hr Holter corroborated ventricular bigeminy in the PVC group (PVC 49.8% vs. control PVC group developed cardiomyopathy with a significant reduction in left ventricular (LV) ejection fraction (PVC 39.7±5.4% vs. control 60.7±3.8%, PPVC 33.3±3.5mm vs. control 23.7±3.6mm, PPVC group. PVC-induced cardiomyopathy was resolved within 2-4 weeks after discontinuation of PVCs. No inflammation, fibrosis, or changes in apoptosis and mitochondrial oxidative phosphorylation were observed with PVC-induced cardiomyopathy. Conclusions This novel PVC animal model demonstrates that frequent PVCs alone can induce a reversible form of cardiomyopathy in otherwise structurally normal hearts. PVC-induced CM lacks gross histopathological and mitochondrial abnormalities seen in other canine models of CM. PMID:21576277

  13. Influence of plasticizer content on the transition of electromechanical behavior of PVC gel actuator.

    Science.gov (United States)

    Ali, Mohammad; Ueki, Takamitsu; Tsurumi, Daijiro; Hirai, Toshihiro

    2011-06-21

    The actuation performance of plasticized poly(vinyl chloride) (PVC) gel actuators in an electric field depends on their chemical composition and electrical and mechanical properties. The influence of plasticizer (dibutyl adipate) content on electromechanical behavior of PVC gels was investigated by impedance spectroscopy and space charge measurement. By plasticizing the PVC, the dielectric constant and space charge density of PVC gel were drastically increased at 1:2 w/w ratio of PVC to plasticizer. To apply the results obtained from the impedance spectroscopy and space charge measurement, electrostatic adhesive forces generated between the PVC gel and the anode were measured. The electrostatic adhesive force at the anode was also dramatically increased at the same plasticizer content. All of the results indicated a transition of electromechanical behavior of PVC gel in the electric field, which was considered to originate from the orientation of polarized plasticizer molecules and dipole rotation of PVC chains. By using the electrostatic adhesive force of PVC gel derived from the electromechanical transition, a new electroactive actuator can be developed for novel applications. © 2011 American Chemical Society

  14. Quality control in the recycling stream of PVC from window frames by hyperspectral imaging

    Science.gov (United States)

    Luciani, Valentina; Serranti, Silvia; Bonifazi, Giuseppe; Di Maio, Francesco; Rem, Peter

    2013-05-01

    Polyvinyl chloride (PVC) is one of the most commonly used thermoplastic materials in respect to the worldwide polymer consumption. PVC is mainly used in the building and construction sector, products such as pipes, window frames, cable insulation, floors, coverings, roofing sheets, etc. are realised utilising this material. In recent years, the problem of PVC waste disposal gained increasing importance in the public discussion. The quantity of used PVC items entering the waste stream is gradually increased as progressively greater numbers of PVC products approach to the end of their useful economic lives. The quality of the recycled PVC depends on the characteristics of the recycling process and the quality of the input waste. Not all PVC-containing waste streams have the same economic value. A transparent relation between value and composition is required to decide if the recycling process is cost effective for a particular waste stream. An objective and reliable quality control technique is needed in the recycling industry for the monitoring of both recycled flow streams and final products in the plant. In this work hyperspectral imaging technique in the near infrared (NIR) range (1000-1700 nm) was applied to identify unwanted plastic contaminants and rubber present in PVC coming from windows frame waste in order to assess a quality control procedure during its recycling process. Results showed as PVC, PE and rubber can be identified adopting the NIR-HSI approach.

  15. Analysis of Phthalate Ester Content in PVC Plastics by means of FT-Raman Spectroscopy

    DEFF Research Database (Denmark)

    Nørbygaard, Thomas; Berg, Rolf W.

    2004-01-01

    Polyvinyl chloride, PVC or [CH2-CHCl]n , is a common polymer used extensively for a wide range of industrial and household products. To achieve the proper material characteristics (e.g. softness, ductility), plasticizers such as phthalates are usually added to the otherwise hard and brittle PVC......, medical devices and toys may harm the e.g. reproductive organs of exposed infants. PVC is readily distinguished from other common polymers (e.g. polyethylene, polypropylene, polystyrene) by the use of Raman spectroscopy. By far the most commonly used phthalate plasticizer in PVC is di(2-ethylhexyl...

  16. Metalclad substation subdivided into tight compartments

    Energy Technology Data Exchange (ETDEWEB)

    Diaferia, A.; Messie, M.

    1990-02-06

    This invention relates to a high voltage metalclad substation, having a metal enclosure, filled with a high dielectric strength gas, and subdivided into different compartments by tight insulating partitions. The object of this invention is to achieve a simplified substation of reduced dimensions preserving the possibilities of performing operations on part of the substation, while the other part remains live. According to the invention, a metalclad substation is provided, having a busbar isolating switch including an operating mechanism housed in the busbar compartment. The movable contacts of the isolating switch are housed in a compartment separated by a tight insulating partition from the busbar compartment. Tight partitioning of the compartments enables operations to be carried out in the different compartments while maintaining at least one of the busbars switched on to supply the unaffected part of the installation. The invention can be applied to a single-phase or a three-phase enclosure substation. 4 figs.

  17. Abdominal Compartment Syndrome due to OHSS

    Directory of Open Access Journals (Sweden)

    Firoozeh Veisi

    2012-03-01

    Full Text Available Abdominal compartment syndrome is a dangerous clinical situation, usually following abdominal injuries&operations. It is seldom observed in patients with gynecologic and obstetric problems. Abdominalcompartment syndrome may be consequence ovarian hyperstimulation syndrome. A 28-year-old womanpresented as a sever ovarian hyperstimulation.The increased IAP indicated that OHSS may beconsidered a compartment syndrome. Abdominal compartment syndrome needs laparotomy orparacentesis for reduction of pressure.

  18. Effect of Proportion of Home and External Scrap on the Mechanical Properties of Recycled PVC: A Comparative Study

    OpenAIRE

    M. Jalal Uddin; Fahmida Gulshan; ASW Kurny

    2015-01-01

    Raw material powder mixtures have been prepared with PVC resin, unplasticized polyvinylchloride (uPVC) scrap and additives. A twin screw extruder has been used to make pipe for sample preparation from the mixture. Domestic and external uPVC scrap were formulated and blended with PVC resin to form melt compound. Domestic samples designated as DS-10, DS-20, DS-30, DS-40, DS-50 and DS-100 have been prepared by blending 10, 20, 30, 40, and 50 phr and 100% uPVC domestic scrap with PVC resin and v...

  19. Deterioration of plasticized PVC components in Apollo spacesuits

    DEFF Research Database (Denmark)

    Shashoua, Yvonne; Schnell, Ulrich; Young, Lisa

    2002-01-01

    in the Life Support System, used to transport air and water to the astronaut, and in the Liquid Cooling Garment, used to cool the wearer of the spacesuit, exhibited high levels of deterioration. Tubing was unacceptably discoloured, tacky to the touch and surfaces were obscured by crystals. Visual examination......, Fourier Transform infrared spectroscopy and Low-Vacuum scanning electron microscopy suggested that discolouration was a result of dehydrochlorination of the PVC polymer, tackiness was caused by migration of di (2-ethylhexyl) phthalate (DEHP) plasticizer to surfaces, and phthalic acid crystals formed...

  20. Head loss for PVC pipes conducting wasterwater of coffee processing

    OpenAIRE

    Carvalho, Jacinto de A.; Aquino, Reinaldo F.; Pereira, Geraldo M.; Rodrigues, Reginaldo C.; Campos, Thiago B.

    2009-01-01

    Visando determinar a perda de carga distribuída e avaliar a variação dos coeficientes de atrito das equações Universal e de Hazen-Williams em tubulações comerciais de PVC, conduzindo águas residuárias do processamento do café (descascamento e demucilagem), ensaios foram conduzidos no Laboratório de Hidráulica do Departamento de Engenharia da Universidade Federal de Lavras, em que os resultados apontaram aumento do fator de atrito "f" e, conseqüentemente, da perda de carga, de 5 a 35% para águ...

  1. Separation of polyvinyl chloride (PVC) from automobile shredder residue (ASR) by froth flotation with ozonation

    International Nuclear Information System (INIS)

    Reddy, Mallampati Srinivasa; Kurose, Keisuke; Okuda, Tetsuji; Nishijima, Wataru; Okada, Mitsumasa

    2007-01-01

    The purpose of this study is to develop froth flotation to separate polyvinyl chloride (PVC) from automobile shredder residue (ASR) plastic mixtures of variable composition. Some polymers in ASR polymer mixtures have similar density and hydrophobicity with PVC and thus selective flotation of PVC from ASR polymer mixtures cannot be achieved. The present study focused on the surface modification of PVC with ozonation, and then the modified PVC can be separated from other polymers by the following froth flotation. The results of this study indicate that the selective recovery of PVC from real ASR polyethylene tetra pethelate (PET), polymethyl methacrylate (PMMA), polybutyl methacralate (PBMA), ethyl acrylate (EA), polycarbonate (PC) and rubber mixtures can be accomplished in a three-step process involving a gravity separation, ozonation and froth flotation. The rubber was removed from other heavy ASR (PVC, PET, PMMA, PBMA, EA and PC) polymers by froth flotation without mixing. It was found that ozonation process produced the desired difference in contact angle required (from 89.5 to 73.0 o ) for separation of PVC from other heavy ASR polymers, whereas the contact angles of other polymers was slightly decreased. The most of the load ASR, i.e. about 72.4% is floated away and 27.6% was settled down. The highest component 96.7% of PVC was recovered in the settled fraction. As a result of this research effort, the surface modification of PVC with ozonation can be efficiently useful to separate the PVC from other similar density ASR mixed polymers

  2. Plastics piping systems for industrial applications : acrylonitrile-butadiene- styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) : specifications for components and the system : metric series

    CERN Document Server

    International Organization for Standardization. Geneva

    2003-01-01

    Plastics piping systems for industrial applications : acrylonitrile-butadiene- styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) : specifications for components and the system : metric series

  3. Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Dimensions of sockets - Metric series

    CERN Document Server

    International Organization for Standardization. Geneva

    1985-01-01

    Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Dimensions of sockets - Metric series

  4. Plastics piping systems for industrial applications – Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) – Specifications for components and the system – Metric series

    CERN Document Server

    Deutsches Institut für Normung. Berlin

    2003-01-01

    Plastics piping systems for industrial applications – Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) – Specifications for components and the system – Metric series

  5. Penelitian penggunaan minarex sebagai plasticizer untuk pembuatan kompon slang PVC

    Directory of Open Access Journals (Sweden)

    Niken Karsiati

    1995-12-01

    Full Text Available The objective of the research is to find out the maximum quantity of Minarex as plasticizer which can be added in making compound PVC hose which fulfills the requirements of JIS K. 6771-77 “Flexible Vinyl Tube. Materials used are PVC resin added by additives, i.e DOP, BaCdZn, Stearic Acid, dyes and Minarex as DOP substitution. They all must be mixed and feed to two roll mill homogenizing. Temperature of operational is within 50-800C, roll speed is approximately 10 and 8,6 rpm. Then the compound is moulded into slab form using hydraulic press machine at 1700C, pressure 150 kg/cm2for 10 minutes. The slab is tested its physical properties including tensile strength, elongation at break, tensile strength after accelerated aging, and also observed organoleptically. Based on the research, compound with Minarex substitution 10 parts still conform to JIS K. 6771-77 and the appearance is good.

  6. Abdominal Compartment Syndrome in Surgical Patients

    African Journals Online (AJOL)

    CASE SERIES. Abstract. Background: The deleterious effects of intra- abdominal hypertension and abdominal compartment syndrome, affect almost every system ..... 148(1), 81–4. 14. Nacev TV. Abdominal Compartment Syndrome. In Multiple Trauma Patients With Concomitant. Abdominal and Head Lesions --Mechanisms.

  7. Compartmented mode workstation (CMW) comparisons

    Energy Technology Data Exchange (ETDEWEB)

    Tolliver, J.S.

    1995-12-31

    As the Compartmented Mode Workstation (CMW) market has matured, several vendors have released new versions of their CMW operating systems. These include a new version from SecureWare (CMW + Version 2.4), and Sun`s CMW 1.1 (also known as Trusted Solaris 1.1). EC is now shipping MLS+ 3.0 for DEC Alpha platforms. Relatively new entries in the market include Loral B1/CMW for IBM RS/6000 platforms and a SecureWare-based CMW for HP platforms (HP-UX 10.09). With all these choices it is time for a comparative analysis of the features offered by the various vendors. The authors have three of the above five CMW systems plus HP-UX BLS 9.09, which is a multilevel secure operating system (OS) targeted at the B1 level but not a CMW. Each is unique in sometimes obvious, sometimes subtle ways, a situation that requires knowing and keeping straight a variety of commands to do the same thing on each system. Some vendors offer extensive GUI tools for system administration; some require entering command-line commands for certain system administration tasks. They examine the differences in system installation, system administration, and system operating among the systems. They look at trusted networking among the various systems and differences in the network databases and label encodings files. They examine the user interface on the various systems from logging in to logging out.

  8. PVC-based composite material containing recycled non-metallic printed circuit board (PCB) powders.

    Science.gov (United States)

    Wang, Xinjie; Guo, Yuwen; Liu, Jingyang; Qiao, Qi; Liang, Jijun

    2010-12-01

    The study is directed to the use of non-metallic powders obtained from comminuted recycled paper-based printed circuit boards (PCBs) as an additive to polyvinyl chloride (PVC) substrate. The physical properties of the non-metallic PCB (NMPCB) powders were measured, and the morphological, mechanical and thermal properties of the NMPCB/PVC composite material were investigated. The results show that recycled NMPCB powders, when added below a threshold, tended to increase the tensile strength and bending strength of PVC. When 20 wt% NMPCB powders (relative to the substrate PVC) of an average diameter of 0.08 mm were added, the composite tensile strength and bending strength reached 22.6 MPa and 39.83 MPa, respectively, representing 107.2% and 123.1% improvement over pure PVC. The elongation at break of the composite material reached 151.94% of that of pure PVC, while the Vicat softening temperature of the composite material did not increase significantly compared to the pure PVC. The above results suggest that paper-based NMPCB powders, when used at appropriate amounts, can be effective for toughening PVC. Thus, this study suggests a new route for reusing paper-based NMPCB, which may have a significant beneficial environmental impact. Copyright © 2010 Elsevier Ltd. All rights reserved.

  9. The Paradigms They Are a-Changin': past, present and future of PVC bacteria research.

    Science.gov (United States)

    Rivas-Marín, Elena; Devos, Damien P

    2017-10-20

    These are exciting times for PVC researchers! The PVC superphylum is composed of the bacterial phyla Planctomycetes, Verrucomicrobia, Chlamydiae (those three founders giving it its name), Lentisphaerae and Kirimatiellaeota as well as some uncultured candidate phyla, such as the Candidatus Omnitrophica (previously known as OP3). Despite early debates, most of the disagreements that surround this group of bacteria have been recently resolved. In this article, we review the history of the study of PVC bacteria, with a particular focus on the misinterpretations that emerged early in the field and their resolution. We begin with a historical perspective that describes the relevant facts of PVC research from the early times when they were not yet termed PVC. Those were controversial times and we refer to them as the "discovery age" of the field. We continue by describing new discoveries due to novel techniques and data that combined with the reinterpretations of old ones have contributed to solve most of the discordances and we refer to these times as the "illumination age" of PVC research. We follow by arguing that we are just entering the "golden age" of PVC research and that the future of this growing community is looking bright. We finish by suggesting a few of the directions that PVC researches might take in the future.

  10. Formation of polychlorinated compounds in the combustion of PVC with iron nanoparticles.

    Science.gov (United States)

    Font, Rafael; Gálvez, Araceli; Moltó, Julia; Fullana, Andrés; Aracil, Ignacio

    2010-01-01

    The influence of iron nanoparticles in the fuel-rich combustion of PVC has been studied in this work. Dynamic runs for PVC and the mixture PVC and iron nanoparticles were firstly carried out by TGA-MS in order to study the influence of iron on the compounds evolved in the thermal degradation of PVC. To complete the study both PVC and a mixture of PVC and iron nanoparticles were burnt in a laboratory reactor under two different operating conditions: at 850 degrees C and in two stages, the first one at 375 degrees C and the resulting char cooled and subsequently burnt at 850 degrees C. Carbon oxides, light hydrocarbons, PAHs, chlorophenols, chlorobenzenes and PCDD/Fs were analyzed. It was observed that the mixture of PVC with iron nanoparticles at 375 degrees C greatly enhances the formation of light hydrocarbons and polychlorinated compounds, probably indicating that the presence of iron during the thermal decomposition of PVC causes the formation of iron chloride which may have a high catalytic effect.

  11. Non-collinear wave mixing for non-linear ultrasonic detection of physical ageing in PVC

    NARCIS (Netherlands)

    Demcenko, A.; Akkerman, Remko; Nagy, P.B.; Loendersloot, Richard

    2012-01-01

    This work considers the characterization of linear PVC acoustic properties using a linear ultrasonic measurement technique and the non-collinear ultrasonic wave mixing technique for measurement of the physical ageing state in PVC. The immersion pulse-echo measurements were used to evaluate phase

  12. Migration of additives from poly(vinyl chloride) (PVC) tubes into aqueous media

    DEFF Research Database (Denmark)

    Wang, Qian; Storm, Birgit Kjærside

    2005-01-01

    The stability and migration product of medical PVC tubes plasticized with polyadipates were investigated by ageing in phosphate buffer at pH 1.679 and water at different temperatures. Changes in the PVC tubes were studied by wtaer absorption, weight loss, Fourier infrared spectroscopy (FTIR), dif...

  13. Effect of plasticizer and surface topography on the cleanability of plasticized PVC materials

    International Nuclear Information System (INIS)

    Maeaettae, J.; Koponen, H.-K.; Kuisma, R.; Kymaelaeinen, H.-R.; Pesonen-Leinonen, E.; Uusi-Rauva, A.; Hurme, K.-R.; Sjoeberg, A.-M.; Suvanto, M.; Pakkanen, T.A.

    2007-01-01

    A quantitative radiochemical measuring procedure was used to investigate soil adhesion on laboratory-made polyvinyl chloride (PVC) surfaces. The materials contained different plasticizers and microstructures. Both the quality and amount of plasticizers and the microstructure affected the cleanability of the PVC samples. The surface topography and structures were examined with a contact angle meter, atomic force microscopy (AFM) and a contact profilometer

  14. PVC stay-in-place panel covers for tilt-up and pre-cast construction

    OpenAIRE

    ECT Team, Purdue

    2012-01-01

    Octaform™ stay-in-place concrete forming system is PVC insulated concrete form system. These forms have been used in the industry for various applications to improve the insulation and corrosion resistance of structures. Octaform™ has developed the panel covers so the advantages of PVC stay-in-place concrete forming systems could be applied to tilt-up and pre-cast construction.

  15. A Strategy for Nonmigrating Plasticized PVC Modified with Mannich base of Waste Cooking Oil Methyl Ester.

    Science.gov (United States)

    Jia, Puyou; Zhang, Meng; Hu, Lihong; Song, Fei; Feng, Guodong; Zhou, Yonghong

    2018-01-25

    The waste cooking oil (WCO) production from the catering industry and food processing industry causes serious environmental, economic and social problems. However, WCO can be used for the preparation of fine chemicals such as internal plasticizer. With this aim, this work is focused on preparing internal plasticizer by using WCO and determining technical viability of non-migration poly (vinyl chloride) (PVC) materials. The mannich base of waste cooking oil methyl ester (WCOME) was synthesized from WCO via esterification, interesterification and mannich reaction, which was used to produce self-plasticization PVC materials as an internal plasticizer. The results showed that the PVC was plasticized effectively. Self-plasticization PVC films showed no migration in n-hexane, but 15.7% of dioctyl phthalate (DOP) leached from DOP/PVC(50/50) system into n-hexane. These findings transformed the traditional plastic processing technology and obtained cleaner production of no migration plasticizer from WCO.

  16. PVCs, PVC-Induced Cardiomyopathy, and the Role of Catheter Ablation.

    Science.gov (United States)

    Sharma, Esseim; Arunachalam, Karuppiah; Di, Mengyang; Chu, Antony; Maan, Abhishek

    2017-06-01

    Premature ventricular contractions (PVCs) are common arrhythmias noticed in the clinical setting because of premature depolarization of the ventricular myocytes. Although often thought to be reflective of underlying disease rather than intrinsically harmful, PVCs have recently been linked with worse outcomes in patients without significant cardiac disease. Long-term exposure to a high PVC burden can lead to the development of PVC-induced cardiomyopathy. The pathogenesis of this condition is poorly understood at the current time. Many studies have suggested that catheter ablation of these PVCs may result in reversal of the PVC-induced cardiomyopathy. This article will go over the natural history of PVCs and PVC-induced cardiomyopathy, as well as review the current literature on the role of catheter ablation in treating PVC-induced cardiomyopathy.

  17. Characterization of the surface and the interphase of PVC-copper amine-treated wood composites

    Science.gov (United States)

    Jiang, Haihong; Kamdem, D. Pascal

    2010-05-01

    Contact angles and surface energy of wood, as well as interfacial shear strength between wood and polyvinyl chloride (PVC) were investigated and used to monitor the modifications generated on the surfaces of wood treated with a copper ethanolamine solution. An increase in surface energy of wood after treatments promotes wetting of PVC on wood surfaces. Improved interfacial shear strength between treated wood and PVC matrix can be attributed to the formation of a stronger wood-PVC interphase. This suggests that treatment may be used to improve the adhesion between wood surface and PVC in the formulation of wood fiber composites to yield products with enhanced mechanical properties and better biological and physical performance against decay and insect destroying wood.

  18. Propiedades mecánicas de residuos de PVC provenientes de cables eléctricos

    OpenAIRE

    Franco Urquiza, Edgar Adrian; Maspoch Rulduà, Mª Lluïsa

    2014-01-01

    En este trabajo se evaluaron las propiedades mecánicas de desechos de cloruro de polivinilo (PVC) proveniente de cables eléctricos. El residuo contenía 60% de PVC , 30% de polietileno, 7% de goma y 3% de fracción metálica. La fracción metálica de separó de forma manual. La recuperación de PVC se realizó mediante el método de flotación. Se prepararon 6 mezclas de PVC con residuo (R). El PVC y las mezclas se ensayaron a tracción, obteniendo una reducción de la resistencia y la ductilidad al inc...

  19. Evaluation of Drug Sorption to PVC- and Non-PVC-based Tubes in Administration Sets Using a Pump.

    Science.gov (United States)

    Jin, Su-Eon; You, Siwon; Jeon, Seungho; Byon, Hyo-Jin; Hwang, Sung-Joo

    2017-03-11

    Administration sets are delivery tools for the direct application of drugs into the body and are composed of a spike, a drip chamber, tubes, Luer adapters (connectors), a needle cover for protection, and other accessories. Drug sorption to tubes of administration sets is a critical issue in terms of safety and efficacy. Although drug sorption is an important factor in the quality of an administration set, there are no standard evaluation methods for the regulation of drug sorption to the tubes. Here, we describe an evaluation protocol for drug sorption to tubes of administration sets. Tubes made of polyvinyl chloride (PVC)- and non-PVC-based polymeric materials were cut to 1 m in length. Diazepam and tacrolimus were used as model drugs. In the kinetic sorption study, we selected the drug concentration and flow rate based on the clinical usage of these drugs. After the dilution of each drug in a glass bottle, the diluted drug solution was delivered through tubes of administration sets using a pump. Samples were collected in amber vials at appropriate time points and the drugs were analyzed using high-performance liquid chromatography. Drug concentrations and sorption levels to tubes of the administration sets were calculated. Acceptable criteria to ensure the quality of administration sets are recommended.

  20. Study on thickness distribution of thermoformed medical PVC blister

    Science.gov (United States)

    Li, Yiping

    2017-08-01

    Vacuum forming has many advantages over other plastic forming processes due to its cost effectiveness, time efficiency, higher product precision, and more design flexibility. Nevertheless, when pressures greater than the atmospheric value are required to force the thermo-plastic into more intimate contact with the mold surface, pressure forming is a better choice. This paper studies the process of air-pressure thermoforming of plastic sheet, and focuses on medical blister PVC products. ANSYS POLYFLOW tool is used to simulate the process and analyze the wall thickness distribution of the blister. The influence of mold parameters on the wall thickness distribution of thermoformed part is thus obtained through simulation. Increasing radius between mold and side wall at the bottom of blister and draft prove to improve the wall thickness distribution.

  1. Compartmentalization in PVC super-phylum: evolution and impact.

    Science.gov (United States)

    Pinos, Sandrine; Pontarotti, Pierre; Raoult, Didier; Baudoin, Jean Pierre; Pagnier, Isabelle

    2016-08-09

    The PVC super-phylum gathers bacteria from seven phyla (Planctomycetes, Verrucomicrobiae, Chlamydiae, Lentisphaera, Poribacteria, OP3, WWE2) presenting different lifestyles, cell plans and environments. Planctomyces and several Verrucomicrobiae exhibit a complex cell plan, with an intracytoplasmic membrane inducing the compartmentalization of the cytoplasm into two regions (pirellulosome and paryphoplasm). The evolution and function of this cell plan is still subject to debate. In this work, we hypothesized that it could play a role in protection of the bacterial DNA, especially against Horizontal Genes Transfers (HGT). Therefore, 64 bacterial genomes belonging to seven different phyla (whose four PVC phyla) were studied. We reconstructed the evolution of the cell plan as precisely as possible, thanks to information obtained by bibliographic study and electronic microscopy. We used a strategy based on comparative phylogenomic in order to determine the part occupied by the horizontal transfers for each studied genomes. Our results show that the bacteria Simkania negevensis (Chlamydiae) and Coraliomargarita akajimensis (Verrucomicrobiae), whose cell plan were unknown before, are compartmentalized, as we can see on the micrographies. This is one of the first indication of the presence of an intracytoplasmic membrane in a Chlamydiae. The proportion of HGT does not seems to be related to the cell plan of bacteria, suggesting that compartmentalization does not induce a protection of bacterial DNA against HGT. Conversely, lifestyle of bacteria seems to impact the ability of bacteria to exchange genes. Our study allows a best reconstruction of the evolution of intracytoplasmic membrane, but this structure seems to have no impact on HGT occurrences. This article was reviewed by Mircea Podar and Olivier Tenaillon.

  2. Removal of a long PVC pipe strangulated in the penis by hot-melt method.

    Science.gov (United States)

    Jiatao, Ji; Bin, Xu; Huamao, Ye; Jianguo, Hou; Bing, Liu; Yinghao, Sun

    2011-02-01

    Penile incarceration for erotic or autoerotic purposes has been reported in a wide range of age groups, and often presents a significant challenge to urologic surgeons. No ready method has been reported for removing a polyvinylchloride (PVC) pipe entrapped on the penis. To present our experience in using hot-melt method to remove a constricted PVC pipe on the penis. A long melting split was made on the PVC pipe entrapped on the penis by using the long narrow branch of forceps heated on a gas stove. The heated forceps was able to make a melt split on the PVC pipe. Consequently, the PVC pipe was removed by pulling the edges of the pipe apart without much difficulty. The total operation time was 20 minutes. Penile incarceration is a urologic emergency, for which resourcefulness is required in some unexpected cases. Hot-melting has proved to be an easy and effective method for removing penile strangulation by a PVC pipe. To our knowledge, it is the first report about the removal of PVC pipe entrapped on a penis. © 2010 International Society for Sexual Medicine.

  3. Isolation and molecular characterization of polyvinyl chloride (PVC) plastic degrading fungal isolates.

    Science.gov (United States)

    Ali, Muhammad Ishtiaq; Ahmed, Safia; Robson, Geoff; Javed, Imran; Ali, Naeem; Atiq, Naima; Hameed, Abdul

    2014-01-01

    The recalcitrant nature of polyvinyl chloride creates serious environmental concerns during manufacturing and waste disposal. The present study was aimed to isolate and screen different soil fungi having potential to biodegrade PVC films. After 10 months of soil burial experiment, it was observed that a number of fungal strains were flourishing on PVC films. On morphological as well as on 18rRNA gene sequence and phylogenetic basis they were identified as Phanerochaete chrysosporium PV1, Lentinus tigrinus PV2, Aspergillus niger PV3, and Aspergillus sydowii PV4. The biodegradation ability of these fungal isolates was further checked in shake flask experiments by taking thin films of PVC (C source) in mineral salt medium. A significant change in color and surface deterioration of PVC films was confirmed through visual observation and Scanning electron microscopy. During shake flask experiments, P. chrysosporium PV1 produced maximum biomass of about 2.57 mg ml(-1) followed by A. niger PV3. P. chrysosporium PV1 showed significant reduction (178,292 Da(-1)) in Molecular weight of the PVC film than control (200,000 Da(-1)) by gel permeation chromatography. Furthermore more Fourier transform infrared spectroscopy and nuclear magnetic resonance also revealed structural changes in the PVC. It was concluded that isolated fungal strains have significant potential for biodegradation of PVC plastics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Upgrading of PVC rich wastes by magnetic density separation and hyperspectral imaging quality control.

    Science.gov (United States)

    Luciani, Valentina; Bonifazi, Giuseppe; Rem, Peter; Serranti, Silvia

    2015-11-01

    Polyvinylchloride (PVC) is one of the most produced polymers in Europe, with a share of 11% in terms of mass (8 milliontons) of total polymer consumption, but in 2010 only 5% of the total PVC production came from recycled materials, where other polymer recycling achieves a level of 15% on average. In order to find an innovative process to extract PVC from window frames waste, a combination of two innovative technologies was tested: magnetic density separation (MDS) and hyperspectral imaging (HSI). By its nature, MDS is a flexible high precision density separation technology that is applicable to any mixture of polymers and contaminants with non-overlapping densities. As PVC has a very distinctive high density, this technology was tested to obtain high-grade PVC pre-concentrates from window frame waste. HSI was used to perform a quality control of the products obtained by MDS showing that PVC was clearly discriminated from unwanted rubber particles of different colors. The results showed that the combined application of MDS and HSI techniques allowed to separate and to check the purity of PVC from window frame waste. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. The effect of brominated furanones on the formation of Staphylococcus aureus biofilm on PVC.

    Science.gov (United States)

    Yujie, Lei; Geng, Xu; Huang, Yun-chao; Li, Yang; Yang, Kaiyun; Ye, Lianhua; Chen, Xiaobo; Zhao, Guangqiang; Yin, Chen

    2013-01-01

    To study the influence of brominated furanones on the formation of Staphylococcus aureus (SA) biofilm on PVC thus providing new avenues of research on the surface modification of materials and clinical treatment of biomaterial-centered infection. Three brominated furanones (furanone-1, furanone-2, and furanone-3) were coated on the surface of PVC material. Both the modified PVC materials and SA were co-cultivated together. To assess the thickness of bacterial biofilm and bacterium colony unit area on PVC materials, confocal laser scanning microscopy and scanning electron microscopy (SEM) were used to observe the surface structure of SA biofilm formation. All treatments were compared with the control group which was not coated with furanones. PVC materials coated with furanone-1 had an increase in bacterial biofilm as well as SA colony area when compared with control. However, there was no significant difference between treating with furanone-1 and furanone-3 (P > 0.05). The impact of different brominated furanones on SA biofilm formation on the surface of PVC materials is different, furanone-1 can promote the SA biofilm formation on the surface of PVC material.

  6. Preparation of modified clay with benzethonium or cetylpyridinium chloride and evaluation of their interactions with PVC

    International Nuclear Information System (INIS)

    Resende, Daniel K.; Dornelas, Camila B.; Moreira, Leonardo A.; Gomes, Ailton S.; Tavares, Maria I.B.; Cabral, Lucio M.; Simeoni, Luiz A.

    2009-01-01

    The objective of this work was the preparation of modified clays with benzethonium or cetylpyridinium to obtain organophilic silicates with good stability and evaluate the possible use of them for the preparation of nanocomposites of poly(vinyl chloride) (PVC). The reactions of modification of clays and the PVC were prepared by solution intercalation. The new clays were evaluated by X-ray diffraction (XRD) and Low field nuclear magnetic resonance (NMR). The reactions of clays with PVC were assessed by Low-field NMR, through the determination of proton spin lattice relaxation time. The stability of new organophilic clays and their reactions with PVC were evaluated by thermogravimetric analysis (TGA). High stability was observed for organophilic clays prepared. The degradation of PVC materials obtained with the organophilic clay began at temperatures above 200 deg C. If it is considered that the temperatures normally used in the processing of PVC are between 140 deg C to 180 deg C, the observed results may indicate the possibility of the use of clays for preparation of nanomaterials with PVC. (author)

  7. 49 CFR 38.127 - Sleeping compartments.

    Science.gov (United States)

    2010-10-01

    ...., heating and air conditioning controls, lighting controls, call buttons, electrical outlets, etc.) shall be... SPECIFICATIONS FOR TRANSPORTATION VEHICLES Intercity Rail Cars and Systems § 38.127 Sleeping compartments. (a...

  8. Molecular surface structural changes of plasticized PVC materials after plasma treatment.

    Science.gov (United States)

    Zhang, Xiaoxian; Zhang, Chi; Hankett, Jeanne M; Chen, Zhan

    2013-03-26

    In this research, a variety of analytical techniques including sum frequency generation vibrational spectroscopy (SFG), coherent anti-Stokes Raman spectroscopy (CARS), and X-ray photoelectron spectroscopy (XPS) have been employed to investigate the surface and bulk structures of phthalate plasticized poly(vinyl chloride) (PVC) at the molecular level. Two types of phthalate molecules with different chain lengths, diethyl phthalate (DEP) and dibutyl phthalate (DBP), mixed with PVC in various weight ratios were examined to verify their different surface and bulk behaviors. The effects of oxygen and argon plasma treatment on PVC/DBP and PVC/DEP hybrid films were investigated on both the surface and bulk of films using SFG and CARS to evaluate the different plasticizer migration processes. Without plasma treatment, SFG results indicated that more plasticizers segregate to the surface at higher plasticizer bulk concentrations. SFG studies also demonstrated the presence of phthalates on the surface even at very low bulk concentration (5 wt %). Additionally, the results gathered from SFG, CARS, and XPS experiments suggested that the PVC/DEP system was unstable, and DEP molecules could leach out from the PVC under low vacuum after several minutes. In contrast, the PVC/DBP system was more stable; the migration process of DBP out of PVC could be effectively suppressed after oxygen plasma treatment. XPS results indicated the increase of C═O/C-O groups and decrease of C-Cl functionalities on the polymer surface after oxygen plasma treatment. The XPS results also suggested that exposure to argon plasma induced chemical bond breaking and formation of cross-linking or unsaturated groups with chain scission on the surface. Finally, our results indicate the potential risk of using DEP molecules in PVC since DEP can easily leach out from the polymeric bulk.

  9. PVC mixtures’ mechanical properties with the addition of modified calcite as filler

    Directory of Open Access Journals (Sweden)

    Vučinić Dušica R.

    2012-01-01

    Full Text Available In this study mechanical properties of PVC mixtures (PVC, stabilizer, lubricant, filler such as tensile strength, tensile elongation, breaking strength, and breaking elongation were investigated. Unmodified calcite, as well as calcite modified by stearic acid, were used as fillers in wet and dry processes. The PVC mixtures containing the calcite modified by wet procedure have better mechanical properties compared to those with the calcite modified by the dry process. Tensile and breaking strength of the PVC mixture containing the calcite modified with 1.5% stearic acid using wet process, are higher for 2.8% and 5.2%, respectively, compared to the PVC mixture containing the calcite modified with the same amount of acid used in the dry process. The tensile strength difference between the mixtures increases with the increase of the concentration of used stearic acid up to 3%. The strength of PVC mixture with the calcite modified by wet process is 3.1% higher compared to the mixture containing calcite modified by dry process. The results showed that the bonding strength between calcite and the adsorbed organic component affected tensile strength, tensile elongation and breaking strength of the PVC mixtures. The best filler was obtained by wet modification using 1.5% stearic acid solution that provided the formation of a stearate monolayer chemisorbed on calcite. The PVC mixtures containing the calcite modified by wet process using 1.5% stearic acid solution exhibited the best mechanical properties. This calcite was completely hydrophobic with dominant chemically adsorbed surfactant, which means that stearate chemisorbed on calcite provided stronger interaction in the calcite-stearic acid-PVC system.

  10. Large eddy simulation of compartment fires

    Science.gov (United States)

    Trouvé, Arnaud; Wang, Yi

    2010-12-01

    This paper is aimed at illustrating the capabilities of contemporary large eddy simulation (LES) solvers for compartment fire applications. Compartment fires refer to fires occurring indoors and feature a variety of complex phenomena associated with smoke accumulation and restricted air ventilation. The article provides a brief presentation of the main features of compartment fire dynamics followed by a review of the modelling challenges found in a LES treatment of these dominant features. The discussion shows that in addition to a suitable model for the turbulent flow dynamics, simulations of compartment fires require a collection of physical sub-models in order to describe a large range of multi-physics phenomena, including pyrolysis processes, buoyancy-driven flow, combustion, soot formation and thermal radiation. Some examples of LES simulations of compartment fires are also presented, using two different solvers that represent the current state-of-the-art of compartment fire modelling: FDS developed by the National Institute of Standards and Technology, USA, and FireFOAM developed by FM Global, USA. Both solvers are available as free open-source software and are representative of ongoing efforts within the fire research and engineering community to self-organise and to promote the general area of LES-based fire modelling.

  11. Influence of physical aging on impact embrittlement of uPVC pipes

    OpenAIRE

    Visser, Roy; Bor, Teunis Cornelis; Wolters, Mannes; Warnet, Laurent; Govaert, L.E.

    2011-01-01

    Most failures of unplasticised poly(vinyl chloride) (uPVC) pipes used in the Dutch gas distribution network originate from third party damage. Brittle pipes should therefore be replaced to ensure safe operation of the network. In this study, the relation between physical aging and embrittlement of uPVC is investigated using instrumented falling weight impact tests. The ductile to brittle transition temperature was first measured for a water pipe grade uPVC at different stages of aging. As a h...

  12. Comparative Study of PVC-Free All-Solid-State, PVC Membrane, and Carbon Paste Ion-Selective Electrodes for the Determination of Dapoxetine Hydrochloride in Pharmaceutical Formulation.

    Science.gov (United States)

    Aziz, Azza; Khamees, Nesrin; Mohamed, Tagreed Abdel-Fattah; Derar, Abeer Rashad

    2016-11-01

    The potentiometric response characteristics and analytical applications of a poly(vinyl chloride) (PVC)-free all-solid-state ion-selective electrode for dapoxetine hydrochloride (DAP) are examined. The Nernstian response of the electrode was evaluated by comparison with PVC-based liquid membrane and carbon paste electrodes. The PVC-free electrode is prepared by direct incorporation of dapoxetine-tetraphenyl borate (DAP-TPB) as a sensing element into a commercial nail varnish containing cellulose acetate propionate. The composite was applied onto a 3 mm diameter graphite disk electrode. The electrode exhibited a Nernstian slope of 56.0 mV/decade in the concentration range of 1 × 10-4 to 1 × 10-2 mol/L with an LOD of 2 × 10-5 mol/L. The electrode is independent of pH in the range of 2 to 6 and showed good selectivity for DAP with respect to a large number of inorganic cations and amino acids. Comparable Nernstian slope, sensitivity, pH range, and selectivity pattern were obtained with a PVC membrane and a carbon paste incorporating DAP-TPB as a sensing element and dioctylphthalate as a solvent mediator. The electrodes were used for the determination of DAP in pure solution and in tablets without extraction with high accuracy and precision (RSD ≤ 2%). The nail varnish solid-state electrode is simple, economical, and rapid when compared with PVC membrane and carbon paste electrodes.

  13. Nonmigrating Equivalent Substitutes for PVC/DOP Formulations as Shown by a TG Study of PVC with Covalently Bound PEO-PPO Oligomers.

    Science.gov (United States)

    Navarro, Rodrigo; Gacal, Tülin; Ocakoglu, Melike; García, Carolina; Elvira, Carlos; Gallardo, Alberto; Reinecke, Helmut

    2017-03-01

    Monoamino functionalized ethylenoxide (EO)/propylenoxide oligomers (Jeffamine) are linked chemically to poly(vinyl chloride) (PVC) using trichlorotriazine chemistry in order to prepare nonmigrating internally plasticized materials. The dependence of the plasticizer efficiency on both the number of anchoring points to the chains and the PVC/plasticizer compatibility is investigated using oligomers of different molecular weight and hydrophilic-hydrophobic balance. Hydrophilic oligomers (containing predominantly EO) of molecular weights between 2000 and 5000 g mol -1 exhibit excellent plasticizer efficiency, nearly identical to di-2-ethylhexylphthalate (DOP) in conventional PVC/DOP mixtures and may therefore be used as nonmigrating equivalents for DOP. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Photostabilizing Efficiency of PVC in the Presence of Schiff Bases as Photostabilizers.

    Science.gov (United States)

    Yousif, Emad; Al-Amiery, Ahmed A; Kadihum, Abdulhadi; Kadhum, Abdul Amir H; Mohamad, Abu Bakar

    2015-11-04

    The photostabilization of polyvinyl chloride (PVC) films by Schiff bases was investigated. Polyvinyl chloride films containing 0.5 wt % Schiff bases were produced using the same casting method as that used for additive-free PVC films from tetrahydrofuran (THF) solvent. The photostabilization activities of these compounds were determined by monitoring the carbonyl, polyene and hydroxyl indices with irradiation time. The changes in viscosity average molecular weight of PVC with irradiation time were also monitored using THF as a solvent. The quantum yield of chain scission (Φcs) for the studied complexes in PVC was estimated to range between 4.72 and 8.99 × 10(-8). According to the experimental results, several mechanisms were suggested, depending on the structure of the additive. Ultra violet (UV) absorption, peroxide decomposition and radical scavenging were suggested as the photostabilizing mechanisms.

  15. CHEMICALLY MODIFIED FIELD-EFFECT TRANSISTORS - POTENTIOMETRIC AG+ SELECTIVITY OF PVC MEMBRANES BASED ON MACROCYCLIC THIOETHERS

    NARCIS (Netherlands)

    BRZOZKA, Z; COBBEN, PLHM; REINHOUDT, DN; EDEMA, JJH; KELLOGG, RM

    1993-01-01

    A chemically modified field-effect transistor (CHEMFET) with satisfactory Ag+ selectivity is described. The potentiometric Ag+ selectivities of CHEMFETs with plasticized PVC membranes based on macrocyclic thioethers have been determined. All the macrocyclic thioethers tested showed silver response

  16. D-FNN Based Modeling and BP Neural Network Decoupling Control of PVC Stripping Process

    Directory of Open Access Journals (Sweden)

    Shu-zhi Gao

    2014-01-01

    Full Text Available PVC stripping process is a kind of complicated industrial process with characteristics of highly nonlinear and time varying. Aiming at the problem of establishing the accurate mathematics model due to the multivariable coupling and big time delay, the dynamic fuzzy neural network (D-FNN is adopted to establish the PVC stripping process model based on the actual process operation datum. Then, the PVC stripping process is decoupled by the distributed neural network decoupling module to obtain two single-input-single-output (SISO subsystems (slurry flow to top tower temperature and steam flow to bottom tower temperature. Finally, the PID controller based on BP neural networks is used to control the decoupled PVC stripper system. Simulation results show the effectiveness of the proposed integrated intelligent control method.

  17. Photostabilizing Efficiency of PVC in the Presence of Schiff Bases as Photostabilizers

    Directory of Open Access Journals (Sweden)

    Emad Yousif

    2015-11-01

    Full Text Available The photostabilization of polyvinyl chloride (PVC films by Schiff bases was investigated. Polyvinyl chloride films containing 0.5 wt % Schiff bases were produced using the same casting method as that used for additive-free PVC films from tetrahydrofuran (THF solvent. The photostabilization activities of these compounds were determined by monitoring the carbonyl, polyene and hydroxyl indices with irradiation time. The changes in viscosity average molecular weight of PVC with irradiation time were also monitored using THF as a solvent. The quantum yield of chain scission (Φcs for the studied complexes in PVC was estimated to range between 4.72 and 8.99 × 10−8. According to the experimental results, several mechanisms were suggested, depending on the structure of the additive. Ultra violet (UV absorption, peroxide decomposition and radical scavenging were suggested as the photostabilizing mechanisms.

  18. Novel Antimicrobial Organic Thermal Stabilizer and Co-Stabilizer for Rigid PVC

    Directory of Open Access Journals (Sweden)

    Nadia A. Mohamed

    2012-07-01

    Full Text Available Biologically active N-benzoyl-4-(N-maleimido-phenylhydrazide (BMPH was synthesized and its structure was confirmed by elemental analysis and various spectral tools. It was examined as a thermal stabilizer and co-stabilizer for rigid poly (vinyl chloride at 180 °C in air. Blending BMPH with reference samples in different ratios greatly lengthens the thermal stability value and improves the extent of discoloration of PVC. TGA confirmed the improved stability of PVC in presence of the investigated organic stabilizer. GPC measurements were done to investigate the changes occurred in the molecular masses of the degraded samples of blank PVC and PVC in presence of the novel stabilizer. BMPH showed good antimicrobial activity towards two kinds of bacteria and two kinds of fungi.

  19. Study on workers exposed to cadmium in alkaline storage battery manufacturing and PVC compounding

    Energy Technology Data Exchange (ETDEWEB)

    Chan, O.Y.; Tan, K.T.; Kwok, S.F.; Chio, L.F.

    1982-01-01

    The extent of cadmium exposure was studied in a cadmium-nickel battery factory and 8 PVC factories using cadmium stabilisers in the compounding of PVC. A total of 101 cadmium-exposed workers and 21 control subjects matched by sex, age, ethnic group and smoking history was investigated. Blood and urine cadmium levels were considerably elevated in the battery workers but were not raised in the PVC workers. These findings were consistent with the results of cadmium-in-air assessments. Among the female battery workers, urine cadmium excretion increased significantly with employment time. There was good correlation between blood and urine cadmium levels among the female subjects. A significant association between blood cadmium levels and prevalence of chest pain was also noted among the females. No low molecular weight proteinuria was detected, but two female battery workers had slight albuminuria and one male PVC worker had glucosuria but had abnormal GTT results.

  20. Evaluation of the influence of water and oil derivatives absorption on PVC pipes

    International Nuclear Information System (INIS)

    Carpio, D.C.F. del; D'Almeida, J.R.M.

    2010-01-01

    PVC is the only polymer of large consume that is not totally obtained from petroleum, since it contains 57% of chlorine. As chlorine containing materials are resistant to bacteria rich environments, such as buried pipes, PVC is being used for fluid transportation, principally water, but it can also be considered as an alternative material for the transportation of other fluids. This work analyzes the aging behavior of PVC exposed to water, ethanol and diesel oil, using TGA, DSC, FT-IR and DR-X techniques. The results showed that the chemical structure of PVC is not affected by exposure to water and ethanol. For these fluids a dipolar interaction could be occurring, increasing at the beginning of the absorption process, the polymer thermal stability. The diesel oil caused plasticization, with reduction of the Tg since the beginning of the aging process. (author)

  1. Investigation of Ice-PVC separation under Flexural Loading using FEM Analysis

    Directory of Open Access Journals (Sweden)

    H Xue

    2016-08-01

    Full Text Available This paper presents the FEM technique applied in the study of ice separation over a polyvinyl chloride (PVC surface. A two layer model of ice and PVC is analysed theoretically using Euler-Bernoulli beam theory and the rule of mixtures. The physical samples are prepared by freezing ice over the PVC surfaces. The samples are tested experimentally in a four-point loading setup. The experimental results contain strain data gathered through a data acquisition system using the LabView software. The data is collected at the rate of 1 kHz per load step. A model is also coded in MATLAB® and simulated using the finite element method (FEM in ANSYS® Multiphysics. The FEM model of the ice and PVC sample is built using solid elements. The mesh is tested for sensitively. A good agreement is found between the theoretical, experimental and numerical simulation results.

  2. ELECTROCHEMICAL OXIDATION OF ETHANOL USING Ni-Co-PVC COMPOSITE ELECTRODE

    Directory of Open Access Journals (Sweden)

    Riyanto Riyanto

    2011-07-01

    Full Text Available The morphological characteristics and electrochemical behavior of nickel metal foil (Ni, nickel-polyvinyl chloride (Ni-PVC and nickel-cobalt-polyvinyl chloride (Ni-Co-PVC electrodes in alkaline solution has been investigated. The morphological characteristics of the electrode surface were studied using SEM and EDS, while the electrochemical behavior of the electrodes was studied using cyclic voltammetry (CV. It was found that composite electrodes (Ni-PVC and Ni-Co-PVC have a porous, irregular and rough surface. In situ studies using electrochemical technique using those three electrodes exhibited electrochemical activity for redox system, as well as selectivity in the electrooxidation of ethanol to acetic acid. The studies also found that an electrokinetics and electrocatalytic activity behaviors of the electrodes prepared were Ni metal foil

  3. AN INVESTIGATION OF THE IMPACT OF IMPURITIES ON THE MECHANICAL PROPERTIES OF RECYCLED PVC EXTRUSION PIPES

    OpenAIRE

    Adamu Alhaji Umar; Raji Olalere Fatai

    2007-01-01

    This work studied the effect of using recycled scraps in the production of rigid PVC extrusion pipe. Different formulations with varied percentages of scraps were extruded and various tests carried out on the sample specimen to determine their corresponding mechanical properties. It was finally discovered that among the two sources of scraps, the in-house scraps contained less impurities and blending about 10% of it with virgin PVC material in the production gave improved mechanical propertie...

  4. Bedside identification of patients at risk for PVC-induced cardiomyopathy: Is ECG useful?

    Science.gov (United States)

    Garster, Noelle C; Henrikson, Charles A

    2017-07-01

    Premature ventricular complexes (PVCs) are an underrecognized cause of cardiomyopathy. Standard 12-lead electrocardiogram (ECG) has potential to direct attention toward at-risk patients. We performed a single-center, retrospective chart review of 1,240 patients who completed ECG and Holter monitoring at Oregon Health and Science University Hospital between January 1, 2011 and December 31, 2013 to investigate the relationship of PVC frequency on ECG with burden on Holter. Primary outcome measures included PVC quantity on ECG, mean PVC quantity on Holter, and percentage of total beats on Holter recorded as PVCs. High PVC burden was defined as ≥10% of total beats. Weighted mean percentages of total beats on Holter monitor recorded as PVCs were calculated for 0, 1, 2, and ≥3 PVCs on ECG and found to be 1.4% (n = 1,128), 3.5% (n = 32), 4.3% (n = 25), and 16.6% (n = 55), respectively, which represent statistically significant differences (P PVC Holter burden was 58%. Negative predictive value for 0 PVCs on ECG was 98%. The sensitivity and specificity of ECG to identify high PVC burden on Holter was 72% and 93.6%, respectively, when utilizing a positive ECG result as one PVC or more, and 44% and 98.9%, respectively, with ≥3 PVCs on ECG. The positive likelihood ratio corresponding to ≥3 PVCs on ECG was 40. These findings demonstrate that the number of PVCs on ECG can be utilized for quick bedside estimation of high PVC burden. © 2017 Wiley Periodicals, Inc.

  5. Effects of Sulfate, Chloride, and Bicarbonate on Iron Stability in a PVC-U Drinking Pipe

    OpenAIRE

    Wang, Jiaying; Tao, Tao; Yan, Hexiang

    2017-01-01

    In order to describe iron stability in plastic pipes and to ensure the drinking water security, the influence factors and rules for iron adsorption and release were studied, dependent on the Unplasticized poly (vinyl chloride) (PVC-U) drinking pipes employed in this research. In this paper, sulfate, chloride, and bicarbonate, as well as synthesized models, were chosen to investigate the iron stability on the inner wall of PVC-U drinking pipes. The existence of the three kinds of anions could ...

  6. Non-destructive and in-situ determination of the degree of gelation of pvc pipes

    OpenAIRE

    Drenth, E.; Bor, Teunis Cornelis; Visser, Roy; Wolters, Mannes; Davidovski, Z.

    2012-01-01

    Various non-destructive methods, based on different physical principles, were investigated for their ability to differentiate between uPVC pipes having various levels of gelation. It was found that the micro-hardness method was not able to differentiate between uPVC samples of different levels of gelation. A possible explanation is that the affected volume under the indentation does not reach the centre of the pipe wall where differences in the level of gelation are most pronounced. The laser...

  7. Iliopsoas compartment lesions: a radiologic evaluation

    International Nuclear Information System (INIS)

    Leao, Alberto Ribeiro de Souza; Amaral, Raquel Portugal Guimaraes; Abud, Thiago Giansante; Demarchi, Guilherme Tadeu Sauaia; Freire Filho, Edison de Oliveira; Novack, Paulo Rogerio; Campos, Flavio do Amaral; Shigueoka, David Carlos; Fernandes, Artur da Rocha Correa; Szejnfeld, Jacob; D'Ippolito, Giuseppe

    2007-01-01

    The iliopsoas compartment, a posterior boundary of the retroperitoneum, is comprised of the psoas major, psoas minor and iliac muscles. The symptoms picture in patients presenting with pathological involvement of this compartment may show a wide range of nonspecific clinical presentations that may lead to delayed diagnosis. However, in the search of an etiological diagnosis, it is already known that inflammation, tumors, and hemorrhages account for almost all the lesions affecting the iliopsoas compartment. By means of a retrospective analysis of radiological studies in patients with iliopsoas compartment lesions whose diagnosis was confirmed by anatomopathological evaluation or clinical follow-up, we have reviewed its anatomy as well as the main forms of involvement, with the purpose of identifying radiological signs that may help to narrow down the potential differential diagnoses. As each lesion is approached we will discuss the main radiological findings such as presence of gas in pyogenic abscesses, bone destruction and other bone changes of vertebral bodies in lesions secondary to tuberculosis, involvement of fascial planes in cases of neoplasms, and differences in signal density and intensity of hematomas secondary to hemoglobin degradation, among others. So, we have tried to present cases depicting the most frequent lesions involving the iliopsoas compartment, with emphasis on those signs that can lead us to a more specific etiological diagnosis. (author)

  8. Iliopsoas compartment lesions: a radiologic evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Leao, Alberto Ribeiro de Souza; Amaral, Raquel Portugal Guimaraes; Abud, Thiago Giansante; Demarchi, Guilherme Tadeu Sauaia; Freire Filho, Edison de Oliveira; Novack, Paulo Rogerio; Campos, Flavio do Amaral; Shigueoka, David Carlos; Fernandes, Artur da Rocha Correa; Szejnfeld, Jacob; D' Ippolito, Giuseppe [Universidade Federal de Sao Paulo (UNIFESP-EPM), Sao Paulo, SP (Brazil). Dept. de Diagnostico por Imagem]. E-mail: ar.leao@uol.com.br; Santos, Jose Eduardo Mourao [Universidade Federal de Sao Paulo (UNIFESP-EPM), Sao Paulo, SP (Brazil)

    2007-07-15

    The iliopsoas compartment, a posterior boundary of the retroperitoneum, is comprised of the psoas major, psoas minor and iliac muscles. The symptoms picture in patients presenting with pathological involvement of this compartment may show a wide range of nonspecific clinical presentations that may lead to delayed diagnosis. However, in the search of an etiological diagnosis, it is already known that inflammation, tumors, and hemorrhages account for almost all the lesions affecting the iliopsoas compartment. By means of a retrospective analysis of radiological studies in patients with iliopsoas compartment lesions whose diagnosis was confirmed by anatomopathological evaluation or clinical follow-up, we have reviewed its anatomy as well as the main forms of involvement, with the purpose of identifying radiological signs that may help to narrow down the potential differential diagnoses. As each lesion is approached we will discuss the main radiological findings such as presence of gas in pyogenic abscesses, bone destruction and other bone changes of vertebral bodies in lesions secondary to tuberculosis, involvement of fascial planes in cases of neoplasms, and differences in signal density and intensity of hematomas secondary to hemoglobin degradation, among others. So, we have tried to present cases depicting the most frequent lesions involving the iliopsoas compartment, with emphasis on those signs that can lead us to a more specific etiological diagnosis. (author)

  9. I-TiO2/PVC film with highly photocatalytic antibacterial activity under visible light.

    Science.gov (United States)

    Deng, Weihua; Ning, Shangbo; Lin, Qianying; Zhang, Hualei; Zhou, Tanghua; Lin, Huaxiang; Long, Jinlin; Lin, Qun; Wang, Xuxu

    2016-08-01

    Iodine-modified TiO2(I-TiO2) film were coated on medical-grade PVC material by impregnation-deposition method and subsequently characterized by XRD, SEM, TEM, AFM, DRS and XPS. The photocatalytic anti-bacterial activity of I-TiO2/PVC was investigated both by in vitro anti-bacterial experiments and by clinical study. The results revealed that I-TiO2/PVC exhibit excellent photocatalytic antibacterial activity, which can destroy the propagation of the Escherichia coli and cause the deactivation and death of most E. coli bacteria within 30min visible light illumination. Clinical study on animals showed that I-TiO2 coated on PVC decrease the formation of biofilm on PVC surface in the mechanical ventilation. Furthermore, I-TiO2/PVC can effectively reduce inflammation of tracheal tissue of bam suckling pig and prevents the occurrence of VAP. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Effect of oil extracted from coffee grounds in the radiolytic stabilization of PVC

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Thaysa Araujo de; Aquino, Katia Aparecida da Silva; Araujo, Elmo S., E-mail: aquino@ufpe.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear

    2013-07-01

    Commercial Poly(vinyl chloride) (PVC) containing oil extracted from coffee grounds (OCG) at concentrations of 0.50; 1.00 and 1.50 wt% were investigated. The samples were irradiated with gamma radiation ({sup 60}Co) at room temperature and air atmosphere. The viscosity-average molar mass (M{sub v}) was measured for PVC systems without and with oil. Decreases in molar mass observed when the systems were gamma irradiated reflect the random scission effects that take place in the main chain. Degradation index (DI) value was also obtained by viscosity analysis. DI results showed that the addition of OCG at 0.5 wt% into PVC matrix irradiated at dose of 25 kGy decreased the number of main chain scissions and was calculated a protection index of 67% in PVC matrix. Results about the free radical scavenger action of the OCG were obtained by use of 2,2-diphenyl-1-(2,4,6-trinitrophenyl)-hydrazyl radical (DPPH) and are discussed in this study. Decrease of 7% of Young's modulus value and a decrease of 31.5% on the elongation at break value were recorded for PVC films exposed to gamma irradiation. However, no significant changes were recorded in mechanical properties of PVC with OCG. (author)

  11. PVC flexible liners as corrosion protection for brine treatment tanks in chlor-alkali plants

    Energy Technology Data Exchange (ETDEWEB)

    Perez-de-Obanos, M. [Petroquimica de Venezuela, S.A., Caracas (Venezuela); Marin, S. [Univ. Simon Bolivar, Caracas (Venezuela)

    1999-11-01

    Three flexible PVC sheets were evaluated to determine their suitability as liners to protect existing steel tanks handling treated brine at 55 C in a membrane technology Chlor-Alkali plants. The evaluation included: characterization of liners and plasticizers (by Soxhlet technique, Infrared Spectroscopy (IRS), Secondary Ion Mass Spectroscopy (SIMS) and Gel Permeation Chromatography (GPC)); quantification of brine pollutants by Atomic Emission Spectroscopy (AES) and weight-loss/volume ratios; observation of the superficial damage produced by extended immersion in acid hot brine by Scanning Electron Microscopy (SEM); and the estimation of remaining properties in high temperature oxidative atmospheres (per ASTM D 3045). As a result of this evaluation, remaining property curves as a function of time and temperature are presented for high temperature atmospheric exposure. These curves are related to actual service and to changes in liner hardness. Economics of using flexible PVC liners are compared to flakeglass filled thermosetting coatings. The conclusions are that, even though flexible PVC linings are disposable, they protect steel against hot acid brine corrosion, and they are economically attractive compared to flakeglass filled coatings. In addition PVC linings may be more reliable because remaining PVC properties can be measured using nondestructive hardness measurements. PVC linings are not recommended above 65 C in corrosive service because life is notably reduced.

  12. Effect of oil extracted from coffee grounds in the radiolytic stabilization of PVC

    International Nuclear Information System (INIS)

    Lima, Thaysa Araujo de; Aquino, Katia Aparecida da Silva; Araujo, Elmo S.

    2013-01-01

    Commercial Poly(vinyl chloride) (PVC) containing oil extracted from coffee grounds (OCG) at concentrations of 0.50; 1.00 and 1.50 wt% were investigated. The samples were irradiated with gamma radiation ( 60 Co) at room temperature and air atmosphere. The viscosity-average molar mass (M v ) was measured for PVC systems without and with oil. Decreases in molar mass observed when the systems were gamma irradiated reflect the random scission effects that take place in the main chain. Degradation index (DI) value was also obtained by viscosity analysis. DI results showed that the addition of OCG at 0.5 wt% into PVC matrix irradiated at dose of 25 kGy decreased the number of main chain scissions and was calculated a protection index of 67% in PVC matrix. Results about the free radical scavenger action of the OCG were obtained by use of 2,2-diphenyl-1-(2,4,6-trinitrophenyl)-hydrazyl radical (DPPH) and are discussed in this study. Decrease of 7% of Young's modulus value and a decrease of 31.5% on the elongation at break value were recorded for PVC films exposed to gamma irradiation. However, no significant changes were recorded in mechanical properties of PVC with OCG. (author)

  13. Setup time reduction in pvc boots production through smed technique

    Directory of Open Access Journals (Sweden)

    Amanda Herculano da Costa

    2012-03-01

    Full Text Available The competition imposed by the market requires of the organizations the continuous improvement of its processes, products and offered services, with lower production costs. This article addresses this issue describing the resulting improvements from the implementation of Single Minute Exchange of Die (SMED in the process of exchange the mold of the injection machine of PVC during the boots manufacturing. The case study was conducted in a large company of footwear, located in the state of Paraiba. In order to find the best alternative to the problem of the setup of the molds, were used the SMED and the methodology for problem resolution, and then was implemented the solution that generated greater productivity for the company. Among the improvements made, we should emphasize the reduction of inactive time of 11.56 minutes to 5 minutes, reducing the time needed for the adjustments of the molds with the implementation of guides for centering and shims to standardize the heights of the molds.

  14. Effects of combustible stacking in large compartments

    DEFF Research Database (Denmark)

    Gentili, Filippo; Giuliani, Luisa; Bontempi, Franco

    2013-01-01

    This paper focuses on the modelling of fire in case of various distributions of combustible materials in a large compartment. Large compartments often represent a challenge for structural fire safety, because of lack of prescriptive rules to follow and difficulties of taking into account the effect...... to different stacking configurations of the pallets with the avail of a CFD code. The results in term of temperatures of the hot gasses and of the steel elements composing the structural system are compared with simplified analytical model of localized and post-flashover fires, with the aim of highlighting...

  15. Studies on the preparation of multi-monomer grafted PP by one-step extrusion and the blends with PVC

    Directory of Open Access Journals (Sweden)

    2008-01-01

    Full Text Available Firstly, a novel grafted polypropylene (PP was prepared by one step free-radical melt grafting way in a single-screw extruder. The results were shown that the addition of St to the melt-grafting system as a comonomer could significantly enhance MMA grafting degree onto PP and reduce the degradation of PP matrix by means of FTIR and MFR test, respectively. Then, the extruded multi-monomer grafted PP, as a component, directly blend with poly (vinyl chloride (PVC, named as gPP/PVC. The corresponding improved compatibility was examined. Comparison with pure PP/PVC blends, due to the addition of gPP, the tensile strengths of gPP/PVC blends increased significantly and the impact strengths were unchanged as those of pure PP/PVC blends. The DSC results also suggested that the compatibility of PP/PVC blends were improved largely.

  16. Gluteal Compartment Syndrome Secondary to Pelvic Trauma

    Directory of Open Access Journals (Sweden)

    Fernando Diaz Dilernia

    2016-01-01

    Full Text Available Gluteal compartment syndrome (GCS is extremely rare when compared to compartment syndrome in other anatomical regions, such as the forearm or the lower leg. It usually occurs in drug users following prolonged immobilization due to loss of consciousness. Another possible cause is trauma, which is rare and has only few reports in the literature. Physical examination may show tense and swollen buttocks and severe pain caused by passive range of motion. We present the case of a 70-year-old man who developed GCS after prolonged anterior-posterior pelvis compression. The physical examination revealed swelling, scrotal hematoma, and left ankle extension weakness. An unstable pelvic ring injury was diagnosed and the patient was taken to surgery. Measurement of the intracompartmental pressure was measured in the operating room, thereby confirming the diagnosis. Emergent fasciotomy was performed to decompress the three affected compartments. Trauma surgeons must be aware of the possibility of gluteal compartment syndrome in patients who have an acute pelvic trauma with buttock swelling and excessive pain of the gluteal region. Any delay in diagnosis or treatment can be devastating, causing permanent disability, irreversible loss of gluteal muscles, sciatic nerve palsy, kidney failure, or even death.

  17. Abdominal Compartment Syndrome in Surgical Patients | Muturi ...

    African Journals Online (AJOL)

    Background: The deleterious effects of intraabdominal hypertension and abdominal compartment syndrome, affect almost every system. Patients at risk are the critically ill, in whom it leads to alteredorgan perfusion and end organ dysfunction/failure. The five cases reported highlight the diagnostic and management ...

  18. Greater fibroblast proliferation on an ultrasonicated ZnO/PVC nanocomposite material.

    Science.gov (United States)

    Maschhoff, Paul M; Geilich, Benjamin M; Webster, Thomas J

    2014-01-01

    There has been a significant and growing concern over nosocomial medical device infections. Previous studies have demonstrated that embedding nanoparticles alone (specifically, zinc oxide [ZnO]) in conventional polymers (eg, polyvinyl chloride [PVC]) can decrease bacteria growth and may have the potential to prevent or disrupt bacterial processes that lead to infection. However, little to no studies have been conducted to determine mammalian cell functions on such a nanocomposite material. Clearly, for certain medical device applications, maintaining healthy mammalian cell functions while decreasing bacteria growth is imperative (yet uncommon). For this reason, in the presented study, ZnO nanoparticles of varying sizes (from 10 nm to >200 nm in diameter) and functionalization (including no functionalization to doping with aluminum oxide and functionalizing with a silane coupling agent KH550) were incorporated into PVC either with or without ultrasonication. Results of this study provided the first evidence of greater fibroblast density after 18 hours of culture on the smallest ZnO nanoparticle incorporated PVC samples with dispersion aided by ultrasonication. Specifically, the greatest amount of fibroblast proliferation was measured on ZnO nanoparticles functionalized with a silane coupling agent KH550; this sample exhibited the greatest dispersion of ZnO nanoparticles. Water droplet tests showed a general trend of decreased hydrophilicity when adding any of the ZnO nanoparticles to PVC, but an increase in hydrophilicity (albeit still below controls or pure PVC) when using ultrasonication to increase ZnO nanoparticle dispersion. Future studies will have to correlate this change in wettability to initial protein adsorption events that may explain fibroblast behavior. Mechanical tests also provided evidence of the ability to tailor mechanical properties of the ZnO/PVC nanocomposites through the use of the different ZnO nanoparticles. Coupled with previous

  19. Near infrared reflectance spectroscopy for the fast identification of PVC-based films.

    Science.gov (United States)

    Laasonen, M; Rantanen, J; Harmia-Pulkkinen, T; Michiels, E; Hiltunen, R; Räsänen, M; Vuorela, H

    2001-07-01

    Near infrared (NIR) reflectance spectroscopy was used to develop a non-destructive and rapid qualitative method for the analysis of plastic films used by the pharmaceutical industry for blistering. Three types of films were investigated: 250 microm PVC [poly(vinyl chloride)] films, 250 microm PVC films coated with 40 g m(-2) of PVDC [poly(vinylidene dichloride)] and 250 microm PVC films coated with 5 g m(-2) of TE (Thermoelast) and 90 g m(-2) of PVDC. Three analyses were carried out using different pre-treatment options and a PLS (partial least squares) algorithm. Each analysis was aimed at identifying one type of film and rejecting all types of false sample (different thickness, colour or layer). True and false samples from four plastics manufacturers were included in the calibration sets in order to obtain robust methods that were suitable regardless of the supplier. Specificity was demonstrated by testing validation sets against the methods. The tests showed 0% of type I (false negative identification) and 1% of type II errors (false positive identification) for the PVC method, 13 and 3%, respectively, for the PVC-PVDC method and no error for the PVC-TE-PVDC method. Type II errors, mostly due to the slight sensitivity of the methods to film thickness, are easily corrected by simple thickness measurements. This study demonstrates that NIR spectroscopy is an excellent tool for the identification of PVC-based films. The three methods can be used by the pharmaceutical industry or plastics manufacturers for the quality control of films used in blister packaging.

  20. The influence of PVC wrapping on the performance of two laser fluorescence devices on occlusal surfaces in vitro.

    Science.gov (United States)

    Rodrigues, Jonas de Almeida; Hug, Isabel; Lussi, Adrian

    2009-06-01

    The aim of this study was to determine the influence of polyvinyl chloride (PVC) wrapping on the performance of two laser fluorescence devices (LF and LFpen) by assessing tooth occlusal surfaces. Protection of their tips may influence LF measurements. To date there are no studies evaluating the influence of this protection on the performance of the LFpen on permanent teeth, or comparing it to the original LF device. One hundred nineteen permanent molars were assessed by two experienced dentists using the LF and the LFpen devices, both with and without PVC wrapping. The teeth were histologically prepared and assessed for caries extension. The LF values with and without PVC wrapping were significantly different. For both LF devices, the sensitivity and accuracy were lower when the PVC wrapping was used. The specificity was statistically significantly higher for the LFpen with PVC. No difference was found between the areas under the ROC curves with and without PVC wrapping. The ICC showed excellent interexaminer agreement. The Bland and Altman method showed a range between the upper and the lower limits of agreement of 63.4 and 57.8 units for the LF device, and 49.4 and 74.2 for the LFpen device, with and without PVC wrapping, respectively. We found an influence of the PVC wrapping on the performance of the LF and LFpen devices. However, since its influence on detection of occlusal caries lesions is considered for, the use of one PVC layer is suggested to avoid cross-contamination in clinical practice.

  1. Leg 201Tl-SPECT in chronic exertional compartment syndrome

    International Nuclear Information System (INIS)

    Elkadri, N.; Slim, I.; Blondet, C.; Choquet, Ph.; Constantinesco, A.; Lecocq, J.

    2004-01-01

    Leg 201 Tl-SPECT in chronic exertional compartment syndrome Background: The chronic exertional compartment syndrome is one of the most frequent origins regarding leg pain due to sport training. The diagnosis can be established by invasive compartment pressure measurement. The aim of this study is to evaluate the role that could have 201 Tl-SPECT for patients with suspicion of compartment syndrome. Patients and methods: 51 leg 201 Tl-SPECT exams were performed (exercise - and rest without reinjection) in 49 patients; 28 had compartment syndrome confirmed by pressure measurement. About 100 MBq of 201 Tl were injected during exercise, when pain appeared or at least after 25 minutes exercise. We studied mean percentages of level uptake for each compartment, referred to the maximal uptake of both legs. Results: 47 compartments were concerned by compartment syndrome and 361 compartments were not. Scintigraphic patterns in compartments are reversible ischaemia (45%), uptake stability (36%) or reverse redistribution (19%); these patterns are not linked to compartment syndrome. However, there is a significant difference of rest 201 Tl level uptake between compartments with and without compartment syndrome and a significant correlation between muscular pressure measurement and rest level uptake. Conclusion: 201 Tl-SPECT shows that only ischaemia does not explain compartment syndrome. Moreover, it allows to predict pressure variation during exercise but it does not offer any interest in order to select patients for muscular invasive pressure measurement. (author)

  2. Microwave treatment of electric arc furnace dust with PVC: dielectric characterization and pyrolysis-leaching.

    Science.gov (United States)

    Al-Harahsheh, Mohammad; Kingman, Sam; Al-Makhadmah, Leema; Hamilton, Ian E

    2014-06-15

    Microwave treatment of electric arc furnace dust (EAFD) with poly(vinyl chloride) (PVC) was studied in this work. A comprehensive characterization of the dust as well as assessing the suitability of using the thermal de-chlorination of the common plastic (PVC) under inert atmosphere was carried out to assess the possibility of Zn and other heavy metals extraction (Pb and Cd) from EAFD. The dielectric and thermal properties of EAFD, PVC and their mixtures were measured. Once combined and heated the metal oxides present in the dust reacted with HCl released from PVC during thermal de-chlorination, forming metal chlorides which were subsequently recovered by leaching with water. It was found that zinc chloride could be almost completely recovered in the leaching stage, with the overall recovery of Zn reaching 97% when the EAFD:PVC ratio was 1:2. The investigation highlighted that franklinite, the most refractory mineral to leaching, was completely destroyed. The leaching residue was found to compose mainly of magnetite and hematite. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. Calculation of PVC windows for wind loads in high-rise buildings

    Science.gov (United States)

    Konstantinov, Aleksandr; Lambias Ratnayake, Maya

    2018-03-01

    In the following article we examine problems faced when designing PVC windows for high-rise buildings, which are usually not considered when constructing objects for massive sites, using a high-rise residential complex as an example. We address the matters related to wind loads on windows & statistical calculation of the impact of wind loads on them. We have presented variants of installing load-bearing elements of PVC windows which accept wind loads. We conducted a laboratory experiment by simulating wind loads on the window design, which is actually used for glazing the examined high-rise building. In the course of the experiment we determined additional factors which need to be considered when constructing PVC window structures for glazing high-rise buildings. We can determine that the following calculation method for the impact of wind load on PVC windows gives higher values of the desired statistical characteristics of load-bearing elements of a window compared to the results of laboratory experiments. We provide prerequisites to improve the analytical method of calculating impact of wind loads on load-bearing elements of PVC windows.

  4. High-Performance PVC Gel for Adaptive Micro-Lenses with Variable Focal Length.

    Science.gov (United States)

    Bae, Jin Woo; Shin, Eun-Jae; Jeong, Jaeu; Choi, Dong-Soo; Lee, Jong Eun; Nam, Byeong Uk; Lin, Liwei; Kim, Sang-Youn

    2017-05-18

    This paper presents a bio-inspired adaptive micro-lens with electrically tunable focus made of non-ionic high-molecular-weight polyvinyl chloride (PVC) gel. The optical device mimics the design of the crystalline lens and ciliary muscle of the human eye. It consists of a plano-convex PVC gel micro-lens on Indium Tin Oxide (ITO) glass, confined with an annular electrode operating as an artificial ciliary muscle. Upon electrical activation, the electroactive adhesive force of the PVC gel is exerted on the annular anode electrode, which reduces the sagittal height of the plano-convex PVC gel lens, resulting in focal length variation of the micro-lens. The focal length increases from 3.8 mm to 22.3 mm as the applied field is varied from 200 V/mm to 800 V/mm, comparable to that of the human lens. The device combines excellent optical characteristics with structural simplicity, fast response speed, silent operation, and low power consumption. The results show the PVC gel micro-lens is expected to open up new perspectives on practical tunable optics.

  5. Preparation of Non-Woven Fiber Mats by Mixture of PVC and Epoxidized Natural Rubber

    International Nuclear Information System (INIS)

    Muhammad Hariz Othman; Mahathir Mohamed; Dahlan Mohd

    2014-01-01

    Eletrospun non-woven fibre mats prepared from ENR modified PVC were successfully fabricated at ambient temperature by electro spinning method. Liquid epoxidized natural rubber (LENR) was used because it is easier to handle compared to dried ENR. PVC was mixed with LENR based on 3 different ratios (9:1, 8:2 and 7:3). The effect of ENR on electrospinnibality of PVC was investigated.The morphologies and thermal properties of the electro span fibre mats were characterized and assessed using scanning calorimetry (DSC). The polymer solution concentration 16 aut % formed a diameter of the fibres were mainly affected by the addition of natural rubber and weight ratio of the solution. The diameter of the fibres also decreased with increasing amount of LENR in the solution. Thermal degradation involved two-step degradation with the first degradation representing the dehydro chlorination of PVC to form polyene and followed by the decomposition of LENR and the polyene.Addition of LENR into the sample caused the T g of electro spun fibre mats of PVC/LENR to shift toward lower temperature. (author)

  6. Change Spectroscopic, thermal and mechanical studies of PU/PVC blends

    Energy Technology Data Exchange (ETDEWEB)

    Hezma, A.M. [Spectroscopy Department, Physics Division, National Research Center, Giza (Egypt); Elashmawi, I.S. [Spectroscopy Department, Physics Division, National Research Center, Giza (Egypt); Physic Department, Faculty of Science, Taibah University, Al-Ula (Saudi Arabia); Rajeh, A., E-mail: a.rajeh88@yahoo.com [Physic Department, Faculty of Science, Amran University, Sa' dah (Yemen); Physics Department, Faculty of science, Mansoura University, Mansoura (Egypt); Kamal, Mustafa [Physics Department, Faculty of science, Mansoura University, Mansoura (Egypt)

    2016-08-15

    Blends of polyurethane (PU) and polyvinyl chloride (PVC) with different concentrations were prepared by casting method. The effects of PU on PVC blends was examined by Fourier transform-infrared (FTIR), Ultra-violet visible studies (UV/VIS.), X-ray diffraction (XRD), Thermogravimetric (TGA), Differential scanning calorimetry (DSC), and mechanical properties (stress–strain curve). The interaction between PU and PVC was examined by FT-IR through the absorbance of the N–H groups and was correlated to mechanical/thermal properties. Ultra-violet visible said that optical energy gap decrease with increasing concentration of PU. Differential scanning calorimetry results was observed a single glass transition temperature (T{sub g}) for blends this confirming existence miscibility within the blends. The causes for best thermal stability of some blends may be described by measurements of interactions between C=O groups of PU and the α-hydrogen of PVC or a dipole–dipole –C=O..Cl–C– interactions. Significant alterations in FTIR, X-ray and DSC examination shows an interactions between blends had good miscibility. X-ray shows some alterations in the intensity with additional PU. PU change the mechanical behavior of PVC through of the blends. When polyurethane content increase causes polyvinyl chloride tensile strength decreases and elongation at break increase.

  7. Sorption of aroma compounds in PET and PVC during the storage of a strawberry syrup.

    Science.gov (United States)

    Ducruet, V; Vitrac, O; Saillard, P; Guichard, E; Feigenbaum, A; Fournier, N

    2007-11-01

    The sorption of 14 aroma compounds into PET and PVC was monitored during storage of a strawberry syrup for 1 year. Concentrations in the syrup and in the polymer were determined during storage and compared with previously published results obtained with glass bottles. Apparent partition coefficients between the polymer and the syrup (noted K app) were estimated from experimental kinetics without reaching equilibrium K app values and optimally identified from the kinetic data obtained between 30 and 90 days. They exhibited a similar behaviour for both polymers with values were between 2 x 10(-5) and 2 x 10(-3), 4 x 10(-5) and 3 x 10(-2), respectively, for PET and PVC. The variation of K app values in PET was mainly correlated to the polarity of tested compounds as assessed by their log P values. By contrast, the variations in K app values for PVC were mainly related to their chain lengths. Due to slightly higher partition coefficients and diffusion coefficients in PVC compared with PET, the amount of absorbed aroma was four times higher in PVC than in PET; however, the amount of absorbed aroma compounds was less than 0.1% of the initial amount present into the syrup, except for octyl butanoate. The variation in concentration in the syrup was interpreted as a combination of a degradation process and a transport process into the packaging material. Both effects were particularly noticeable for both PET and unstable aroma compounds.

  8. Comparative studies of neodymium (III)-selective PVC membrane sensors

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Vinod K., E-mail: vinodfcy@iitr.ernet.in [Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247 667 (India); Goyal, Rajendra N.; Sharma, Ram A. [Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247 667 (India)

    2009-08-04

    Sensors based on two neutral ionophores, N,N'-bis((1H-pyrrol-2-yl)methylene)cyclohexane-1,2-diamine (L{sub 1}) and 3,3'-(cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene) bis(methan-1-yl-1-ylidene)bis(5-hydroxymethyl)pyridine-2-ol) (L{sub 2}) are described for quantification of neodymium (III). Effect of various plasticizers; 2-nitrophenyloctylether (o-NPOE), dibutyl butylphosphonate (DBBP), tri-n-butyl phosphates (TBP), dioctylpthalate (DOP) and chloronapthalen (CN) and anion excluder, sodiumtetraphenylborate (NaTPB) has been studied. The membrane composition of PVC:o-NPOE:ionophore (L{sub 1}):NaTPB (w/w; mg) of 150:300:5:5 exhibited best performance. The sensor with ionophore (L{sub 1}) exhibits significantly enhanced selectivity towards neodymium (III) in the concentration range 5.0 x 10{sup -7} to 1.0 x 10{sup -2} M with a detection limit of 1.0 x 10{sup -7} M and a Nernstian compliance (19.8 {+-} 0.3 mV decade{sup -1} of activity) within pH range 4.0-8.0. The response time of sensor was found as 10 s. The influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. The fast and stable response, good reproducibility and long-term stability of the sensor are observed. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for neodymium. The proposed electrode shows fairly good discrimination of neodymium (III) from other cations. The application of prepared sensor has been demonstrated in the determination of neodymium (III) in spiked water samples.

  9. Multi-compartment Aerosol Transport Model

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, Joshua Allen; Santarpia, Joshua; Brotherton, Christopher M.; Omana, Michael Alexis; Rivera, Danielle; Lucero, Gabriel Anthony

    2017-06-01

    A simple aerosol transport model was developed for a multi-compartmented cleanroom. Each compartment was treated as a well-mixed volume with ventilating supply and return air. Gravitational settling, intercompartment transport, and leakage of exterior air into the system were included in the model. A set of first order, coupled, ordinary differential equations was derived from the conservation equations of aerosol mass and air mass. The system of ODEs was then solved in MATLAB using pre-existing numerical methods. The model was verified against cases of (1) constant inlet-duct concentration, and (2) exponentially decaying inlet-duct concentration. Numerical methods resulted in normalized error of less than 10 -9 when model solutions were compared to analytical solutions. The model was validated against experimental measurements from a single field test and showed good agreement in the shape and magnitude of the aerosol concentration profile with time.

  10. A modern definition of mediastinal compartments.

    Science.gov (United States)

    Carter, Brett W; Tomiyama, Noriyuki; Bhora, Faiz Y; Rosado de Christenson, Melissa L; Nakajima, Jun; Boiselle, Phillip M; Detterbeck, Frank C; Marom, Edith M

    2014-09-01

    Division of the mediastinum into compartments is used to help narrow the differential diagnosis of newly detected mediastinal masses, to assist in planning biopsy and surgical procedures, and to facilitate communication among clinicians of multiple disciplines. Several traditional mediastinal division schemes exist based upon arbitrary landmarks on the lateral chest radiograph. We describe a modern, computed tomography-based mediastinal division scheme, which has been accepted by the International Thymic Malignancy Interest Group as a new standard. This clinical classification defines a prevascular (anterior), a visceral (middle), and a paravertebral (posterior) compartment, with anatomic boundaries defined clearly by computed tomography. It is our intention that this definition be used in the reporting of clinical cases and the design of prospective clinical trials.

  11. Hermetic compartments leak-tightness enhancement

    International Nuclear Information System (INIS)

    Murani, J.

    2000-01-01

    In connection with the enhancement of the nuclear safety of the Jaslovske Bohunice V-1 NPP actions for the increase of the leak tightness are performed. The reconstruction has been done in the following directions: hermetic compartments leak tightness enhancement; air lock installation; installation of air lock in SP 4 vent system; integrated leakage rate test to hermetic compartments with leak detection. After 'major' leaks on the hermetic boundary components had been eliminated, since 1994 works on a higher qualitative level began. The essence of the works consists in the detection and identification of leaks in the structural component of the hermetic boundary during the planned refueling outages. The results of the Small Reconstruction and gradual enhancement of leak tightness are presented

  12. Improving the Healthiness of Sustainable Construction: Example of Polyvinyl Chloride (PVC

    Directory of Open Access Journals (Sweden)

    Emina Kristina Petrović

    2018-02-01

    Full Text Available With the increasing emphasis on sustainable construction, it has become important to better understand the impacts of common materials. This is especially paramount with the introduction of the United Nations (UN Sustainable Development Goals (SDGs which call for more comprehensive evaluations, adding many aspects of social consideration to the issues of environmental sustainability, including human health. Polyvinyl chloride (PVC/vinyl can be seen as a material with potential for significant adverse effects on a multiplicity of levels, and the construction industry is its single most significant consumer. This article presents a transdisciplinary review of adverse health impacts associated with PVC showing a number of issues: some that could be eliminated through design, but also some which appear inherent to the material itself and therefore unavoidable. The totality of issues revealed in relation to PVC presents a compelling case for a call for complete elimination of use of this material in sustainable construction.

  13. COMPORTAMIENTO DE UN CEMENTO ASFÁLTICO MODIFICADO CON UN DESECHO DE PVC

    Directory of Open Access Journals (Sweden)

    Fredy Alberto Reyes Lizcano

    2013-06-01

    Full Text Available Las propiedades físicas y reológicas a altas temperaturas de servicio de un cemento asfáltico (CA modificado con un desecho de policloruro de vinilo (PVC fueron evaluadas y son presentadas en el artículo. Adicionalmente se presenta la influencia del tiempo de mezcla del CA con el PVC y el envejecimiento a corto plazo. Un incremento notable en la rigidez y la resistencia a fluir se reporta cuando se adiciona el desecho de PVC a un CA 80-100. De la misma forma, se reporta un incremento en la temperatura máxima de operación en servicio del ligante modificado.

  14. Migration from PVC cling films compared with their field of application

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Lillemark, L.; Lund, L.

    1997-01-01

    . Results of the migration testing were compared with the recommended and/or actual use of the PVC film and the labelling discussed in relation to the relevant EEC directives on food contact plastics. The correct labelling of plasticized PVC film intended for use in retail packaging is important to avoid...... the risk of significant consumer intakes of the plasticizer di-(2-ethylhexyl) adipate (DEHA) after the film has been used in contact with fatty foodstuffs. Sixty percent of the films declared for use in contact with fatty foods showed too high overall migration compared with the current interpretation...... of DEHA to non-fatty foods defined as the food simulant water was at or below 0.1 mg/dm(2) in all PVC-films....

  15. Perfluoroalkyl acid distribution in various plant compartments ...

    Science.gov (United States)

    Crop uptake of perfluoroalkyl acids (PFAAs) from biosolids-amended soil has been identified as a potential pathway for PFAA entry into the terrestrial food chain. This study compared the uptake of PFAAs in greenhouse-grown radish (Raphanus sativus), celery (Apium graveolens var.dulce), tomato (Lycopersicon lycopersicum), and sugar snap pea (Pisum sativum var. macrocarpon) from an industrially impacted biosolids-amended soil, a municipal biosolids­ amended soil, and a control soil. Individual concentrations of PFAAs, on a dry weight basis, in mature, edible portions of crops grown in soil amended with PFAA industrially impacted biosolids were highest for perfluorooctanoate (PFOA; 67 ng/g) in radish root, perfluorobutanoate (PFBA;232 ng/g) in celery shoot, and PFBA (150 ng/g) in pea fruit. Comparatively, PFAA concentrations in edible compartments of crops grown in the municipal biosolids-amended soil and in the control soil were less than 25 ng/g. Bioaccumulation factors (BAFs) were calculated for the root, shoot, and fruit compartments (as applicable) of all crops grown in the industrially impacted soil. BAFs were highest for PFBA in the shoots of all crops, as well as in the fruit compartment of pea. Root­ soil concentration factors (RCFs) for tomato and pea were independent of PFAA chain length, while radish and celery RCFs showed a slight decrease with increasing chain length. Shoot-soil concentration factors (SCFs) for all crops showed a decrease with incre

  16. The pathophysiology of the acute compartment syndrome.

    Science.gov (United States)

    Tollens, T; Janzing, H; Broos, P

    1998-08-01

    The acute compartment syndrome is a condition in which increased pressure within a limited space compromises the circulation and function of the tissues therein, resulting in tissue ischaemia, necrosis and nerve damage. This rise in tissue pressure originates in a decrease of the compartment size or increase of the intracompartmental volume by oedema and/or haemorrhage. Following the arterio-venous gradient theory, capillary blood flow may be impaired through increased venous pressure, decreased arterial pressure and increased peripheral vascular resistance. Often, compartment syndromes develop during reperfusion following a period of ischaemia. During ischaemia, there is a gradual depletion of intracellular stores of high energy phosphate bonds and glycogen stores. There is a buildup of products of glycolysis, particularly lactic acid, with accompanying hydrogen ion accumulation as well as an increase in intracellular reducing agents. Reperfusion may, instead of restoring normal muscle metabolic activity, cause harmful effects by washing out necessary precursors for adenine nucleotide resynthesis. Production of oxygen free radicals occurs with ensuing lipid peroxidation, and calcium influx occurs upon reoxygenation with resultant disruption of oxidative rephosphorylation in the mitochondria. Furthermore, several lines of evidence suggest that white blood cells are important in the pathogenesis of reperfusion injury. Upregulation of both neutrophil receptors and endothelial leucocyte adhesion molecules leads to the sequestration of white blood cells in the muscle with prolongation of the reperfusion injury. This subsequently results in damage to remote organs such as lungs, liver, heart and kidneys.

  17. Compartment syndrome can also be seen in the forearm

    DEFF Research Database (Denmark)

    Asmar, Ali; Broholm, Rikke; Bülow, Jens

    2014-01-01

    Chronic compartment syndrome is a challenge for the clinician and symptomatic similar to neuropathies, tenosynovitis, stress fractures and referred pain from lumbar cervicalis. Thus, chronic compartment syndrome of the upper extremities is probably an underdiagnosed condition. In patients...

  18. Random walks of cytoskeletal motors in open and closed compartments

    NARCIS (Netherlands)

    Lipowsky, R.; Klumpp, S.

    2001-01-01

    Random walks of molecular motors, which bind to and unbind from cytoskeletal filaments, are studied theoretically. The bound and unbound motors undergo directed and nondirected motion, respectively. Motors in open compartments exhibit anomalous drift velocities. Motors in closed compartments

  19. Computed tomography of the cervical compartments on the computer tomogram

    Energy Technology Data Exchange (ETDEWEB)

    Zaunbauer, W.; Haertel, M.

    1984-02-01

    The computed tomographic anatomy of the cervical compartments, with emphasis on the fascial planes of the neck, is described. Typical disease processes within these fascial confined compartments have been documented.

  20. Structural, optical and thermal characterization of PVC/SnO2 nanocomposites

    Science.gov (United States)

    Taha, T. A.; Ismail, Z.; Elhawary, M. M.

    2018-04-01

    The structural, optical, and thermal properties of PVC/SnO2 nanocomposites were investigated. XRD patterns were used to explore the structures of these prepared samples. Optical UV-Vis measurements were analyzed to calculate the spectroscopic optical constants of the prepared PVC/SnO2 nanocomposites. Both direct and indirect optical band gaps decreased with increasing SnO2 content. The refractive index, high frequency dielectric constant, plasma frequency, and optical conductivity values increased with SnO2. The single oscillator energy increased from 5.64 to 10.97 eV and the dispersion energy increased from 6.35 to 19.80 eV with the addition of SnO2. The other optical parameters such as optical moments, single oscillator strength, volume energy loss, and surface energy loss were calculated for different SnO2 concentrations. Raman spectra of the PVC/SnO2 nanocomposite films revealed the characteristic vibrational modes of PVC and surface phonon modes of SnO2. The thermal stability of PVC/SnO2 nanocomposite films was studied using DTA and thermogravimetric analysis. The glass transition ( T g) values abruptly changed from 46 °C for PVC to an average value of 59 °C for the polymer films doped with 2.0, 4.0, and 6.0 wt% SnO2. The weight loss decreased as the SnO2 concentration increased in the temperature range of 350-500 °C, corresponding to enhanced thermal stability.

  1. Dosimetry of the JS-6500 industrial irradiator for the irradiation of the PVC graduated flasks; Dosimetria del irradiador industrial JS-6500 para la irradiacion de probetas de PVC

    Energy Technology Data Exchange (ETDEWEB)

    Castaneda F, A.; Carrasco A, H.; Martinez P, M.E. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    The dosimetry of the JS-6500 AECL irradiator was realized, outside of the industrial transportation rails to know the dose distribution, as well as its dose speed. This one with the intention of exposing to gamma radiation; plastified PVC graduated flasks and evaluating their interweavement or degradation or both. This study of dosimetry was carried out by means of a theoretical and experimental evaluation in air atmosphere. The results allow to know the irradiation conditions of the PVC graduated flasks as well as those results prove that has not a significant difference among the obtained result as theoretical as experimentally due to that the obtained result in the theoretical evaluation is 2.62 KGy/h and the result for the case of the experimental evaluation is 2.74 KGy/h. (Author)

  2. Estudo do comportamento de compostos de PVC com adição de amido Study of the behavior of PVC compounds with added starch

    Directory of Open Access Journals (Sweden)

    Lisandra Abatti

    2011-01-01

    Full Text Available Este trabalho apresenta o estudo do comportamento de compostos de PVC com adição de amido para aplicação especialmente na indústria calçadista. As propriedades mecânicas dos compostos nas proporções de 5, 7,5 e 10% foram estudadas através de ensaios de tração. Também foram verificados os índices de fluidez, alterações de propriedades quando submetidos ao envelhecimento artificial em estufa e natural ao expor às intempéries e enterrar no solo. A viabilidade da aplicação na indústria calçadista foi feita por injeção em gáspeas e tiras de sandálias, com testes de resistência, flexão e testes de campo. Os resultados demonstraram que o acréscimo de amido ao PVC provoca perda nas propriedades mecânicas, justificado pela baixa resistência mecânica do amido em relação ao PVC. Após envelhecimento em estufa o processo de retrogradação do amido deixa os compostos mais rígidos e com menor fluidez. Quando expostos às intempéries e ao solo, o PVC pode ser degradado com perda de HCl, o que leva à acidificação do solo. Nas aplicações em calçados e sandálias a resistência mecânica não atende aos requisitos do mercado. Apesar do baixo custo, o fraco comportamento mecânico dificulta sua viabilização para substituição em escala.This paper deals with the behavior of PVC compounds with addition of starch for applications, especially in the footwear industry. The mechanical properties of the compounds in the proportions of 5, 7.5 and 10% were studied using tensile tests. Also investigated were the flow rates, in addition to changes in properties when the material was subjected to artificial aging in an oven and exposed to natural weather and buried in the soil. The feasibility of application in the industry was evaluated with tests of endurance, strength and field tests in injection uppers and straps of sandals. The results showed that the addition of starch to PVC causes loss of mechanical properties, owing to

  3. Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service (CD-rom)

    NARCIS (Netherlands)

    Visser, Roy; Hermkens, R.M.J.; Wolters, Mannes; Weller, J.; Warnet, Laurent; Beckervordersandforth, C.; Verberg, G.H.B.; Kramer, M.

    2008-01-01

    It has been about fifty years ago since the first unplasticized poly(vinyl chloride) (uPVC) pipes were installed for use in gas distribution purposes. Currently, about 22,500 km of uPVC is still in use in the Dutch gas distribution network. The pipes were originally designed for a lifetime of 50

  4. acute compartment syndrome of the thigh without associated fracture

    African Journals Online (AJOL)

    exercise and contact sport like rugby and soccer (7-11). Other cases were in association with arterial injury (4,. 5, 12). The diagnosis of acute compartment syndrome of the thigh requires a high index of suspicion as it is not a common complication of thigh injury (5). Like compartment syndrome elsewhere, thigh compartment.

  5. Diazepam sorption to PVC- and non-PVC-based tubes in administration sets with quantitative determination using a high-performance liquid chromatographic method.

    Science.gov (United States)

    Jin, Su-Eon; You, Siwon; Jeon, Seungho; Hwang, Sung-Joo

    2016-06-15

    Diazepam is highly sorbed to the plastic materials of administration sets for intravenous infusion. This can be detrimental as it should be delivered to the patient at the administered amount for efficacy and safety. We report here the sorption levels of diazepam onto various types of tubes in administration sets. The tube materials of the administration sets included polyvinylchloride (PVC) and the non-PVC materials such as polyurethane (PU) and polyolefin (PO) were used. Two conditions of diazepam administered in preclinical and clinical settings were tested using an infusion pump. Injections were prepared by diluting diazepam to 20mg/500mL and 10mg/100mL in 5% dextrose. Diluted diazepam solutions at the concentrations of 10mg/100mL and 20mg/500mL were separately delivered through 1m of tubing at 1mL/min for 1.05 and 4.05h. Samples were analyzed using a high-performance liquid chromatography with UV detection. PVC- and PU-based tubes showed higher sorption of diazepam than did PO-based tubes. PO-based tubes delivered more than 90% of the administered diazepam. The results showed that PO-based tubes of administration sets have a promising potential to deliver hydrophobic drugs like diazepam with minimal sorption levels. In addition, the tube materials in administration sets may be one of the critical factors to ensure drug efficacy and safety. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Thermal stability of formulations of PVC irradiated with {gamma} of {sup 60}; Estabilidad termica de formulaciones de PVC irradiadas con {gamma} de {sup 60} Co

    Energy Technology Data Exchange (ETDEWEB)

    Martinez P, M.E.; Carrasco A, H. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)]. E-mail: memp@nuclear.inin.mx; Castaneda F, A.; Benavides C, R.; Garcia R, S.P. [CIQA, 25100 Saltillo, Coahuila (Mexico)

    2004-07-01

    The industry of cables and wires frequently use cable isolations with base of formulations of PVC, in those that stabilizer has usually been used with the help of heavy metals, as the lead, which is toxic. To solve the problem, from the 2002 one has come studying in combined form in the National Institute of Nuclear Research ININ and the Center of Investigation in Applied Chemistry CIQA, the modifications induced by the radiation in formulations with the help of vinyl poly chloride PVC. In these formulations, prepared with cross linking agent, plastifying industrial grade, stuff and non toxic stabilizers of calcium estearate and zinc industrial grade, it is sought to replace the stabilizer of Pb. For this were irradiated it test tubes of PVC with gamma radiation of cobalt 60 to three different dose in atmospheres of air and argon. Later it was determined their thermal stability at different times of heating and it was measured the Young modulus by means of thermo mechanical analysis. Those results obtained together with other techniques of characterization suggest that the irradiated proposed formulation can substitute the one stabilized with lead. (Author)

  7. Re-interpretation of the evidence for the PVC cell plan supports a Gram-negative origin.

    Science.gov (United States)

    Devos, Damien P

    2014-02-01

    The PVC superphylum consists of the core phyla Planctomycetes, Verrucomicrobia and Chlamydiae, together with additional ones. Historically, the cell plan of PVC bacteria has been interpreted as an 'exception' to the classical Gram-negative (Gneg) one (Fuerst Antonie van Leeuwenhoek 104:451-466, 2013). However recent genomic and electron-microscopy data have argued against this exceptional status and suggested the need for a reinterpretation of the data in a more classical framework. In this perspective, I evaluate the arguments that have recently been presented by Fuerst as supporting the PVC cell plan as an 'exception' and present an alternative interpretation that is based on proposed evolutionary events that may have shaped the PVC genomes and proteomes. This interpretation supports the alternative proposal that the PVC cell plan is derived from a Gneg one.

  8. Determination of HCl and VOC Emission from Thermal Degradation of PVC in the Absence and Presence of Copper, Copper(II) Oxide and Copper(II) Chloride

    OpenAIRE

    Jafari, Ahamad J.; Donaldson, John D.

    2009-01-01

    Polyvinyl chloride (PVC) has played a key role in the development of the plastic industry over the past 40 years. Thermal degradation of PVC leads to formation of many toxic pollutants such as HCl, aromatic and volatile organic carbon vapors. Thermal degradation of PVC and PVC in the present of copper, cupric oxide and copper(II) chloride were investigated in this study using a laboratory scale electrical furnace. HCl and Cl- ion were analyzed by a Dionex ion chromatograph and VOCs compounds ...

  9. Tratamento químico superficial e metalização de ABS, PVC e blendas de PVC/ABS

    Directory of Open Access Journals (Sweden)

    Ana Paula Kurek

    2015-04-01

    Full Text Available Visando à substituição do ABS em peças cromadas, amostras de PVC e blendas de PVC/ABS, na razão mássica de 20/80, 40/60 e 60/40, foram submetidas ao pré-tratamento em solução sulfocrômica sob diferentes condições de concentração, tempo e temperatura e sendo em seguida cromadas. As modificações na superfície das peças após o condicionamento foram analisadas por microscopia eletrônica de varredura, microscopia de força atômica e rugosidade. A qualidade da deposição metálica foi avaliada por inspeção visual e teste de adesão. Os resultados mostraram que, aumentando a concentração de PVC nas peças necessitou-se de condições operacionais mais agressivas, tais como maiores temperaturas de banho, tempo de imersão e concentração de solução sulfocrômica para que ocorresse a adesão da camada metálica. De todas as condições testadas com a solução condicionante sulfocrômica no tratamento das peças de PVC e blendas PVC/ABS de 20/80 e 40/60, a concentração de 350 g/L de ácido crômico e 400 g/L de ácido sulfúrico, temperatura de 70°C e tempo de imersão de 15 minutos, ocasionou deposição do metal em toda a superfície das peças, as quais foram aprovadas nos testes de adesão e corrosão.

  10. Enteral Feeding in Abdominal Compartment Syndrome

    Directory of Open Access Journals (Sweden)

    Ye. V Grigoryev

    2009-01-01

    Full Text Available Objective: to substantiate the choice of a gastrointestinal tract (GIT function support regimen as a mode for correction of the abdominal compartment syndrome (ACS. Subjects and methods. Forty-three patients with different causes of inadequate GIT function of various origin and ACS (disseminated peritonitis (45%, pancreatitis (24%, and severe concomitant injury (31% were examined. Group 1 (control received complete parenteral nutritional feeding (n=23; APACHE II scores, 21±4; calculated probability of fatal outcome, 33.5%. In Group II (study, complete parenteral feeding in the first 24 hours after stabilization was supplemented with GIT function support with Pepsisorb (Nutricia in doses of 500, 1000, and 1500 ml on days 1, 2, and 3, respectively (n=20; APACHE II scores, 20±6; calculated probability of fatal outcome, 37.1%. During early enteral nutritional support, the SOFA score was significantly less than that in Group 1 on days 2—3; the oxygenation index significantly increased on day 3; the value of intra-abdominal hypertension decreased to the control values. The positive effect of the GIT function support regimen on regression of the multiple organ dysfunction syndrome (MODS was confirmed by the lowered levels of biological markers (von Willebrand factor (WF and endothelin-1 as markers of endothelial damage of MODS. Correlation analysis showed a direct correlation between the markers of endothelial damage and the SOFA scores (r=0.34; p=0.05 for WF and r=0.49;p=0.03 for endothelin. Conclusion. The GIT function support regimen via early enteral alimentation with Peptisorb, which was initiated in the first 24 hours after admission, is able to level off the manifestations of the early stages of the abdominal compartment syndrome, with the acceptable values of oxygen balance and water-electrolyte and osmotic homeostasis being achieved. Key words: abdominal compartment syndrome, nutritional support, biological markers, oxygenation index

  11. [Intraabdominal hypertension and abdominal compartment syndrome

    DEFF Research Database (Denmark)

    Sonne, M.; Hilligsø, Jens Georg

    2008-01-01

    Intraabdominal hypertension (IAH) and abdominal compartment syndrome (ACS) are rare conditions with high mortality. IAH is an intraabdominal pressure (IAP) above 12 mmHg and ACS an IAP above 20 mmHg with evidence of organ dysfunction. IAP is measured indirectly via the bladder or stomach. Various...... medical and surgical conditions increase the intraabdominal volume. When the content exceeds the compliance of the abdominal wall, the IAP rises. Increased IAP affects the functioning of the brain, lungs, circulation, kidneys, and bowel. The treatment of ACS is a reduction of IAP Udgivelsesdato: 2008/2/11...

  12. Orbital compartment syndrome following aneurysm surgery.

    Science.gov (United States)

    Gauden, Andrew J; Hardy, Thomas; Mack, Heather G; Danesh-Meyer, Helen V; Kaye, Andrew H

    2012-07-01

    Orbital compartment syndrome (OCS) is a rare cause of blindness following intracranial surgery. We report a patient with OCS following intracranial cerebrovascular surgery precipitated by severe straining. OCS occurred due to a rapid increase in intraorbital pressure within the rigid confines of the orbit causing hypoperfusion of critical neural structures, which resulted in visual loss and a complete external ophthalmoplegia. Treatment involved urgent surgical soft tissue decompression of the orbit, corticosteroids and osmotic agents. It is important to consider OCS as a cause of blindness in the neurosurgical postoperative setting as without rapid treatment this condition has a very poor prognosis. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  13. Construction and demolition waste as a source of PVC for recycling.

    Science.gov (United States)

    Prestes, Sabrina Moretto Darbello; Mancini, Sandro Donnini; Rodolfo, Antonio; Keiroglo, Raquel Carramillo

    2012-02-01

    Construction and demolition waste can contain considerable amounts of polyvinyl chloride (PVC). This paper describes a study of the recycling of PVC pipes collected from such waste materials. In a sorting facility for the specific disposal of construction and demolition waste, PVC was found to represent one-third of the plastics separated by workers. Pipes were sorted carefully to preclude any possible contamination by poly(ethylene terephthalate) (PET) found in the waste. The material was ground into two distinct particle sizes (final mesh of 12.7 and 8 mm), washed, dried and recycled. The average formulation of the pipes was determined based on ash content tests and used in the fabrication of a similar compound made mainly of virgin PVC. Samples of recycled pipes and of compound based on virgin material were subjected to tensile and impact tests and provided very similar results. These results are a good indication of the application potential of the recycled material and of the fact that longer grinding to obtain finer particles is not necessarily beneficial.

  14. Quantification of five plasticizers used in PVC tubing through high performance liquid chromatographic-UV detection.

    Science.gov (United States)

    Radaniel, Tsanta; Genay, Stéphanie; Simon, Nicolas; Feutry, Frédéric; Quagliozzi, Francesca; Barthélémy, Christine; Lecoeur, Marie; Sautou, Valérie; Décaudin, Bertrand; Odou, Pascal

    2014-08-15

    Searching for alternatives to di-(2-ethylhexyl)-phthalate, a plasticizer that has been widely used in the manufacturing of PVC medical devices, has become a major challenge since a European regulation underlined some clinical risks. The aim of this study is to develop an HPLC-UV method to quantify the currently used alternative plasticizers to DEHP. Five plasticizers, acetyl tributyl citrate, di-(2-ethylhexyl)-phthalate, di-(ethylhexyl)-terephthalate, di-isononyl-1,2-cyclohexane-dicarboxylate, and trioctyl trimellitate, were separated on a C8 stationary phase (2.6 μm, 100 mm × 4.6mm) under gradient elution in 13 min. They were detected at 221 nm leading to a quantification threshold from 0.3 to 750 μg/mL as a function of the plasticizer. Within-day and between-day precisions were inferior to 0.9% and 18%, respectively. The assays were validated according to the accuracy profile method. Plasticizers were extracted from PVC-tubing by dissolving PVC in THF then precipitating it in methanol with a yield of over 90% for each plasticizer. This assay could feasibly be used to quantify plasticizers in PVC medical devices. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Synthesis of AzPhchitosan-bifenthrin-PVC to protect cables against termites.

    Science.gov (United States)

    Zhang, Lingkun; Cai, Weiwei; Chen, Wu-Ya; Zhang, Li; Hu, Kaikai; Guan, Yan-Qing

    2016-03-30

    The destruction of PVC cables by termites is a continuing and long-standing problem, which can lead to power leakage and power cut. Given the environmental demerits of insecticide overuse, alternative methods of addressing this problem are a highly desirable goal. In this study, we used photo-immobilization to develop a chitosan carrier system to help bifenthrin immobilize on the surface of the PVC substrate. The immobilization was analyzed using nuclear magnetic resonance (NMR), UV absorption, reverse-phase high-performance liquid chromatography (RP-HPLC), Raman absorption spectroscopy, and thermal gravimetric analysis (TGA). The surface structure and biological activity of the embedded and immobilized bifenthrin were examined using scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photon-electron spectroscopy (XPS). Its efficacy was assessed in pest experiments. The results indicate a successful embedding and immobilization of bifenthrin. Furthermore, the chemical bonding network between AzPhchitosan, bifenthrin, and PVC is stable, guaranteeing no environmental release of bifenthrin, and also providing more efficacious protection against termites. The evidence suggests that this photo-immobilization of bifenthrin-embedded chitosan on the surface of PVC substrates is a novel and environmentally friendly technique for termite control. This paper also reports a modification of chitosan with respect to its novel application in environmental protection. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Enhanced Design of a Soft Thin-Film Vibrotactile Actuator Based on PVC Gel

    Directory of Open Access Journals (Sweden)

    Won-Hyeong Park

    2017-09-01

    Full Text Available We fabricated a soft thin-film vibrotactile actuator, which can be easily inserted into wearable devices, based on an electroactive PVC gel. One of the most important factors in fabricating a soft and thin vibrotactile actuator is to create vibrational force strong enough to stimulate human skin in a wide frequency range. To achieve this, we investigate the working principle of the PVC gel and suggest a new structure in which most of electric energy contributes to the deformation of the PVC gel. Due to this structure, the vibrational amplitude of the proposed PVC gel actuator could considerably increase (0.816 g (g = 9.8 m/s2 at resonant frequency. The vibrotactile amplitude is proportional to the amount of input voltage. It increased from 0.05 g up to 0.416 g with increasing applied voltages from 200 V to 1 kV at 1 Hz. The experimental results show that the proposed actuator can create a variety of haptic sensations.

  17. Charge Transfer Resistance and Differential Capacity of the Plasticized PVC Membrane/Water Interface

    Czech Academy of Sciences Publication Activity Database

    Langmaier, Jan; Stejskalová, Květoslava; Samec, Zdeněk

    2002-01-01

    Roč. 521, 1/2 (2002), s. 81-86 ISSN 0022-0728 R&D Projects: GA AV ČR IAA4040902 Institutional research plan: CEZ:AV0Z4040901 Keywords : impedance * PVC plasticized membrane * ion transfer kinetics Subject RIV: CG - Electrochemistry Impact factor: 2.027, year: 2002

  18. Evaluation of the Standard Ion Transfer Potentials for PVC Plasticized Membranes from Voltammetric Measurements

    Czech Academy of Sciences Publication Activity Database

    Langmaier, Jan; Stejskalová, Květoslava; Samec, Zdeněk

    2001-01-01

    Roč. 496, č. 1 (2001), s. 143-147 ISSN 0022-0728. [Symposium in Kyoto. Kyoto, 02.03.2000] R&D Projects: GA AV ČR IAA4040902 Institutional research plan: CEZ:AV0Z4040901 Keywords : ion voltammetry * PVC plasticized membrane * standard ion transfer potential Subject RIV: CG - Electrochemistry Impact factor: 1.960, year: 2001

  19. Selective separation of virgin and post-consumer polymers (PET and PVC) by flotation method

    International Nuclear Information System (INIS)

    Burat, Firat; Gueney, Ali; Olgac Kangal, M.

    2009-01-01

    More and more polymer wastes are generated by industry and householders today. Recycling is an important process to reduce the amount of waste resulting from human activities. Currently, recycling technologies use relatively homogeneous polymers because hand-sorting waste is costly. Many promising technologies are being investigated for separating mixed thermoplastics, but they are still uneconomical and unreliable. At present, most waste polymers cause serious environmental problems. Burning polymers for recycling is not practiced since poisonous gases are released during the burning process. Particularly, polyvinyl chloride (PVC) materials among waste polymers generate hazardous HCl gas, dioxins containing Cl, etc., which lead to air pollution and shorten the life of the incinerator. In addition, they make other polymers difficult to recycle. Both polyethylene terephthalate (PET) and PVC have densities of 1.30-1.35 g/cm 3 and cannot be separated using conventional gravity separation techniques. For this reason, polymer recycling needs new techniques. Among these techniques, froth flotation, which is also used in mineral processing, can be useful because of its low cost and simplicity. The main objective of this research is to recycle PET and PVC selectively from post-consumer polymer wastes and virgin polymers by using froth flotation. According to the results, all PVC particles were floated with 98.8% efficiency in virgin polymer separation while PET particles were obtained with 99.7% purity and 57.0% efficiency in post-consumer polymer separation.

  20. Effect of complexing salt on conductivity of PVC/PEO polymer blend ...

    Indian Academy of Sciences (India)

    2008-02-28

    ehylene oxide) (PEO) and different lithium salts (LiClO4, LiBF4 and LiCF3SO3) were prepared by the solution casting technique. The effect of complexing salt on the ionic conductivity of the PVC/PEO host polymer is discussed.

  1. Selective separation of virgin and post-consumer polymers (PET and PVC) by flotation method.

    Science.gov (United States)

    Burat, Firat; Güney, Ali; Olgaç Kangal, M

    2009-06-01

    More and more polymer wastes are generated by industry and householders today. Recycling is an important process to reduce the amount of waste resulting from human activities. Currently, recycling technologies use relatively homogeneous polymers because hand-sorting waste is costly. Many promising technologies are being investigated for separating mixed thermoplastics, but they are still uneconomical and unreliable. At present, most waste polymers cause serious environmental problems. Burning polymers for recycling is not practiced since poisonous gases are released during the burning process. Particularly, polyvinyl chloride (PVC) materials among waste polymers generate hazardous HCl gas, dioxins containing Cl, etc., which lead to air pollution and shorten the life of the incinerator. In addition, they make other polymers difficult to recycle. Both polyethylene terephthalate (PET) and PVC have densities of 1.30-1.35g /cm(3) and cannot be separated using conventional gravity separation techniques. For this reason, polymer recycling needs new techniques. Among these techniques, froth flotation, which is also used in mineral processing, can be useful because of its low cost and simplicity. The main objective of this research is to recycle PET and PVC selectively from post-consumer polymer wastes and virgin polymers by using froth flotation. According to the results, all PVC particles were floated with 98.8% efficiency in virgin polymer separation while PET particles were obtained with 99.7% purity and 57.0% efficiency in post-consumer polymer separation.

  2. Monitoring a PVC batch process with multivariate statistical process control charts

    NARCIS (Netherlands)

    Tates, A. A.; Louwerse, D. J.; Smilde, A. K.; Koot, G. L. M.; Berndt, H.

    1999-01-01

    Multivariate statistical process control charts (MSPC charts) are developed for the industrial batch production process of poly(vinyl chloride) (PVC). With these MSPC charts different types of abnormal batch behavior were detected on-line. With batch contribution plots, the probable causes of these

  3. Characterization of All Solid State Hydrogen Ion Selective Electrode Based on PVC-SR Hybrid Membranes

    Directory of Open Access Journals (Sweden)

    Yoon-Bo Shim

    2003-06-01

    Full Text Available Hydrogen ion selective membranes formulated with 3140 RTV silicone rubber (SR in PVC were studied to extend the life time of solid state ion sensors through improved membrane adhesion. All solid state hydrogen ion selective electrodes were prepared by incorporation of tridodecyl amine (TDDA as an ionophore, potassium tetrakis[3.5-bis(p-chlorophenylborate (KTpClPB as a lipophilic additive, bis(2-ethylhexyladipate (DOA as a plasticizer. Their linear dynamic range was pH 2.0-11.0 and showed the near Nernstian slope of 55.1±0.2 mV/pH (r=0.999. The ifluences from alkali and alkaline earth metal ions were studied for the response of the final ISE membrane composition. Impedance spectroscopic data showed that the resistance was increased by increasing SR content in PVC. Brewster Angle Microscopy (BAM image showed clear differences according to the SR compositions in PVC. Life time of the all solid state membrane electrode was extended to about 2 months by preparing the membrane with PVC and SR. The standard reference material from NIST (2181 HEPES Free acid and 2182 NaHEPESate was tested for the ISE and it gave good result.

  4. Effect of complexing salt on conductivity of PVC/PEO polymer blend ...

    Indian Academy of Sciences (India)

    Administrator

    The effect of complexing salt on the ionic conductivity of the PVC/PEO host polymer is discussed. Solid polymer electrolyte films were characterized by X-ray diffraction, FTIR spectroscopy, TG/DTA and ac impedance spectroscopic studies. ..... The TG curve shows a first degradation at 70°C accom- panied by a weight loss of ...

  5. CORRELATION OF THE GLASS TRANSITION TEMPERATURE OF PLASTICIZED PVC USING A LATTICE FLUID MODEL

    Science.gov (United States)

    A model has been developed to describe the composition dependence of the glass transition temperature (Tg) of polyvinyl chloride (PVC) + plasticizer mixtures. The model is based on Sanchez-Lacombe equation of state and the Gibbs-Di Marzio criterion, which states that th...

  6. Low frequency dielectric dispersion study of PVC-PPy blends in dilute solution of different solvents

    Science.gov (United States)

    Sharma, Deepika; Tripathi, Deepti

    2017-05-01

    In present study,the effect of adding Polypyrrole (PPy), a conductive polymer, on the dielectric and electrical behavior of Polyvinyl chloride (PVC) in dilute solution of moderate polar solvent Tetrahydrofuran (THF) and polar solvent M-Cresol at low frequency is investigated. The blend of PVC with PPy forms a colloidal solution in both the solvents. The dielectric dispersion study of PVC-PPy blends in THF and M-Cresol has been carried out in the frequency range of 20Hz to 2MHz at temperature of 303 K. The influence of solvent on dielectric and electrical parameters such as dielectric constant [ɛ*(ω)], loss tangent (tan δ) and ac conductivity (σac) of PVC - PPy solutions is studied. At low frequencies, electrode polarization seems to have dominant effect on the complex dielectric constant. The values of relaxation time corresponding to this phenomena is also reported. Dielectric dispersion studies show that the solvent environment plays significant role in governing segmental motion of polymer chain in solution.

  7. Properties of commercial PVC-films with respect to electron dosimetry

    International Nuclear Information System (INIS)

    Miller, A.; Liqing, X.

    1985-05-01

    The properties of three commercially available polyvinyl chloride (PVC) film supplies and one made without additives were tested with respects to their application as routine dose monitors at electron accelerators. Dose fractionation was found to increase the response and the post-irradiation heat treatment was very critical for some of the films. (author)

  8. Investigation of PVC physical ageing in field test specimens using ultrasonic and dielectric measurements

    NARCIS (Netherlands)

    Demcenko, A.; Ravanan, M.; Visser, Roy; Loendersloot, Richard; Akkerman, Remko

    2013-01-01

    Physical ageing in PVC is studied using two techniques: a) non-linear ultrasonic measurements based on the non-collinear wave interaction theory and b) dielectric measurements. The ultrasonic measurement results are compared with dielectric measurement results. The comparison shows that the used

  9. Influence of physical aging on impact embrittlement of uPVC pipes

    NARCIS (Netherlands)

    Visser, Roy; Bor, Teunis Cornelis; Wolters, Mannes; Warnet, Laurent; Govaert, L.E.

    2011-01-01

    Most failures of unplasticised poly(vinyl chloride) (uPVC) pipes used in the Dutch gas distribution network originate from third party damage. Brittle pipes should therefore be replaced to ensure safe operation of the network. In this study, the relation between physical aging and embrittlement of

  10. Influence of Water Content on the Flow Behaviour of PVC-Plastisols

    Science.gov (United States)

    Hochstein, B.; Willenbacher, N.

    2008-07-01

    PVC-Plastisols are used as stone-chipping and corrosion protection. To process plastisols, they have to show special rheological properties. The influence of water content on viscosity and yield stress of PVC-Plastisols was analyzed by using a simplified but relevant formulation with several PVC-particles. When only 0.5-1% of water was added, the viscosity increased by a factor of round about ten and the yield stress increased by a factor of round about one hundred. On the one hand, this shows us, how carefully we have to work during the establishing of the plastisols and the conditioning of the particular ingredients. On the other hand, it allows us to control the rheological properties by the use of water. Neither the particle size distribution nor the structure of the agglomerates is the primary reason for the extreme influence of water content on the rheological properties of plastisols. We assume an adsorption of water on the contact area between adjacent PVC particles and thus an increase of the contact forces between the particles.

  11. Amperometry of heparin polyion using a rotating disk electrode coated with a plasticized PVC membrane

    Czech Academy of Sciences Publication Activity Database

    Langmaier, Jan; Olšák, J.; Samcová, E.; Samec, Zdeněk; Trojánek, Antonín

    2006-01-01

    Roč. 18, č. 2 (2006), s. 115-120 ISSN 1040-0397 R&D Projects: GA ČR GA203/04/0424 Institutional research plan: CEZ:AV0Z40400503 Keywords : amperometry * coulometry * heparin polyion * rotating glassy carbon electrode * PVC membrane Subject RIV: CG - Electrochemistry Impact factor: 2.444, year: 2006

  12. Anomalous conductivity dependence of plasticized PVC for different modificator "A" concentrations and film thicknesses

    OpenAIRE

    Vlasov, D. V.; Apresyan, L. A.; Vlasov, A. D.; Kryshtob, V. I.

    2011-01-01

    The dependences of electrical conductivity of plasticized PVC films on mass fraction of plasticizer "A" and the film thickness are experimentally investigated. Non-monotonic dependence of conductivity on the concentration of plasticizer and strongly nonlinear dependence of the resistance of the film on its thickness are found. Possibility of construction of the models describing received results is shown and also discussed.

  13. Raman Investigations on PVC-Functionalized Single Wall Carbon Nanotube Composites.

    Science.gov (United States)

    Cisneros, Jorge; Chipara, Dorina; Ibrahim, Elamin; Chipara, Mircea

    Polyvinylchloride (PVC) is a widely used polymer whose applications are limited by poor thermal and flame stability. Nanofillers typically enhance the thermal stability and reduce flammability of polymers. Composites containing PVC loaded by COOH functionalized SWNT (PVC-fSWNT) have been obtained by solution mixing. The polymeric matrix was dissolved in THF, the nanofiller was added to the solution, and the as obtained mixture was sonicated for 1 hour. The solvent has been evaporated by heating at 90 oC in an oven for about 12 hours. The concentration of fSWNT ranged from 0 % wt. up to 20 % wt. Thermo gravimetric analysis (TGA) has been performed by using a TA instrument Q500 operating at various heating rates (ranging from 10 to 50 oC/min) from 50 oC to 1000 oC. Measurements have been performed by using a Renishaw InVia confocal Raman microscope, equipped with lasers operating at 432 and 785 nm. The analysis is focused on the effect of polymeric matrix on the fSWNT lines and on the modifications of the Raman lines assigned to the polymeric matrix. Raman measurements on PVC-fSWNT nanocomposites thermally degraded in air in the temperature range 50 to 300 oC are reported. This work was supported by DOD Grant W911NF-15-10063 awarded to University of Rio Grande Valley, Physics Department.

  14. Migration from PVC cling films compared with their field of application

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Lillemark, L.; Lund, L.

    1997-01-01

    Samples of PVC cling films were taken at importers, wholesalers and retail shops, and their overall migration to the alternative food simulant iso-octane was measured, after establishment of a correlation between overall migration to olive oil at 40 degrees C in 10 days and to iso-octane in 2 h...

  15. PVC gel soft actuator-based wearable assist wear for hip joint support during walking

    Science.gov (United States)

    Li, Yi; Hashimoto, Minoru

    2017-12-01

    Plasticized polyvinyl chloride (PVC) gel and mesh electrode-based soft actuators have considerable potential to provide new types of artificial muscle, exhibiting similar responsiveness to biological muscle in air, >10% deformation, >90 kPa output stress, variable stiffness, long cycle life (>5 million cycles), and low power consumption. We have designed and fabricated a prototype of walking assist wear using the PVC gel actuator in previous study. The system has several advantages compared with traditional motor-based exoskeletons, including lower weight and power consumption, and no requirement for rigid external structures that constrain the wearer’s joints. In this study, we designed and established a control and power system to making the whole system portable and wearable outdoors. And we designed two control strategies based on the characteristics of the assist wear and the biological kinematics. In a preliminary experimental evaluation, a hemiparetic stroke patient performed a 10 m to-and-fro straight line walking task with and without assist wear on the affected side. We found that the assist wear enabled natural movement, increasing step length and decreasing muscular activity during straight line walking. We demonstrated that the assistance effect could be adjusted by controlling the on-off time of the PVC gel soft actuators. The results show the effectiveness of the proposed system and suggest the feasibility of PVC gel soft actuators for developing practical soft wearable assistive devices, informing the development of future wearable robots and the other soft actuator technologies for human movement assistance and rehabilitation.

  16. Gluteal Compartment Syndrome After Prolonged Immobilisation

    Directory of Open Access Journals (Sweden)

    H.L. Liu

    2009-04-01

    Full Text Available Muscles in the gluteal region are confined by distinct fascial attachments which can potentially result in compartment syndrome. A 74-year-old chronic drinker was admitted to the medical ward after being found drunk on the street. He noticed acute painful swelling of the right side of his buttock the following morning and recalled a slip and fall prior to his blackout. The whole right half of the buttock was tense with erythematous overlying skin. Examination revealed sciatic nerve palsy and myoglobinuria. Emergency fasciotomy and debridement were performed. Intra-operative pressure measurement confirmed a grossly elevated intra-compartmental pressure. Gluteal compartment syndrome is an extremely rare condition and has only been scantily documented previously in case reports. Early diagnosis is crucial but delay recognition is common from lack of knowledge of the condition and readily results in permanent sciatic nerve injury and acute renal shutdown from myoglobinuria. Awareness of the condition, early diagnosis and prompt exploration provide the only chance of avoiding these devastating consequences. Acute swelling diffusely affecting the whole or one side of the buttock, a history of trauma and prolonged local pressure impingement associated with pain out of proportion to the clinical signs should raise a suspicion of this rare condition.

  17. Analysis of PVC plasticizers in medical devices and infused solutions by GC-MS.

    Science.gov (United States)

    Bourdeaux, Daniel; Yessaad, Mouloud; Chennell, Philip; Larbre, Virginie; Eljezi, Teuta; Bernard, Lise; Sautou, Valerie

    2016-01-25

    In 2008, di-(2-ethylhexyl) phthalate (DEHP), was categorized as CMR 1B under the CLP regulations and its use in PVC medical devices (MD) was called into question by the European authorities. This resulted in the commercialization of PVC MDs plasticized with the DEHP alternative plasticizers tri-octyl trimellitate (TOTM), di-(2-ethylhexyl) terephthalate (DEHT), di-isononyl cyclohexane-1,2-dicarboxylate (DINCH), di-isononyl phthalate (DINP), di-(2-ethylhexy) adipate (DEHA), and Acetyl tri-n-butyl citrate (ATBC). The data available on the migration of these plasticizers from the MDs are too limited to ensure their safe use. We therefore developed a versatile GC-MS method to identify and quantify both these newly used plasticizers and DEHP in MDs and to assess their migration abilities in simulant solution. The use of cubic calibration curves and the optimization of the analytical method by an experimental plan allowed us to lower the limit of plasticizer quantification. It also allowed wide calibration curves to be established that were adapted to this quantification in MDs during migration tests, irrespective of the amount present, and while maintaining good precision and accuracy. We then tested the developed method on 32 PVC MDs used in our hospital and evaluated the plasticizer release from a PVC MD into a simulant solution during a 24h migration test. The results showed a predominance of TOTM in PVC MDs accompanied by DEHP (<0.1% w/w), DEHT, and sometimes DEHA. The migration tests showed a difference in the migration ability between the plasticizers and a non-linear kinetic release. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Mercury transformation and distribution across a polyvinyl chloride (PVC) production line in China.

    Science.gov (United States)

    Ren, Wen; Duan, Lei; Zhu, Zhenwu; Du, Wen; An, Zhongyi; Xu, Lingjun; Zhang, Chi; Zhuo, Yuqun; Chen, Changhe

    2014-02-18

    The production of polyvinyl chloride (PVC) via the calcium carbide process utilizes a catalyst containing large amounts of mercury (Hg) and is therefore one of the most important sources of anthropogenic Hg in China. To measure the emission of Hg from PVC production, we established a flowchart for the calcium carbide process, for which we quantified the Hg content of the material/product at each step. Results indicated that 71.5% of the total Hg (Hg(T)) was lost from the catalyst, most of which was recovered by the Hg remover, accounting for 46.0% of the total Hg (Hg(T)). We determined that 3.7% of the Hg(T) was released into the environment, mostly in solid wastes and byproducts such as hydrochloric acid. Furthermore, no Hg has been detected in the PVC end product. However, we were only able to account for 78.1% of the Hg across the whole system, leaving 21.7% unaccounted for in the mass balance. A rough estimation indicates that most of the "missing" Hg had accumulated in deposits on the inner surface of converters and downstream pipelines; however, the emission to the atmosphere was ≤ 1% of the Hg(T). For a PVC production line equipped with a Hg remover, emissions of Hg to the atmosphere have been estimated to be 4.9 g per tonne PVC. Currently, almost all calcium carbide facilities have been equipped with a Hg remover, which may reduce the release of Hg in China by ∼ 500 t/year.

  19. Stabilizing effect of epoxidized sunflower oil as a secondary stabilizer for Ca/Hg stabilized PVC

    Directory of Open Access Journals (Sweden)

    2008-01-01

    Full Text Available Unsaturated triglyceride oil sunflower was epoxidized and characterized by chemical and spectroscopic methods. Epoxidized sunflower oil (ESO was used as an organic thermal co-stabilizer for rigid poly(vinyl chloride (PVC in the presence of tricalcium dicitrate (Ca3(C6H5O72 and mercury (II acetate (Hg(CH3COO2. The thermo-oxidative degradation of PVC was studied in the presence of these ternary stabilizer systems at 170, 180, 190 and 200°C in N2 atmosphere. The effects of metal carboxylate combination Ca/Hg in the absence and in the presence of epoxidized sunflower oil on static heat treatment of PVC have been studied. The formation of polyene sequences was investigated by UV-visible and FT-IR spectroscopy and by comparing viscosity data obtained in the presence and in the absence of the additives. It was found that the additives retard the rate of degradation and reduce the extent of polymer chain scission associated with the thermal degradation of poly(vinyl chloride. Synergistic effects were found when stabilizer was blended in 50:50 weight ratios with either. It was found that ESO exerted a stabilizing effect on the degradation of PVC. The activation energy for degraded PVC in absence of stabilizers was 38.6 kJ•mol–1 and in the presence of Ca/Hg and Ca/Hg/ESO were 53.3 and 64.7 kJ•mol–1 respectively. In order of compare the efficiency of the epoxidized sunflower oil with these metal soap stabilizers, thermal stabilities were evaluated on the basis of evolved hydrogen chloride determined by conductometry technique and degree of discoloration are discussed.

  20. Ablation of frequent PVC in patients meeting criteria for primary prevention ICD implant: Safety of withholding the implant.

    Science.gov (United States)

    Penela, Diego; Acosta, Juan; Aguinaga, Luis; Tercedor, Luis; Ordoñez, Augusto; Fernández-Armenta, Juan; Andreu, David; Sánchez-Millán, Pablo J; Sánchez, Pablo; Cabanelas, Nuno; Tolosana, Jose Maria; Vassanelli, Francesca; Cabrera, Mario; Korshunov, Viatcheslav; Sitges, Marta; Brugada, Josep; Mont, Lluis; Berruezo, Antonio

    2015-12-01

    Premature ventricular complex (PVC) ablation has been shown to improve left ventricular ejection fraction (LVEF) and New York Heart Association functional class in patients with left ventricular dysfunction. Both are considered key variables in predicting risk of sudden cardiac death. The objective of this study was to assess whether ablation might remove the primary prevention (PP) implantable cardioverter-defibrillator (ICD) indication in patients with frequent PVC. Sixty-six consecutive patients with PP-ICD indication and frequent PVC [33 (50%) men; mean age 53 ± 13 years; 11 (17%) with ischemic heart disease] underwent PVC ablation. The ICD was withheld and the indication was reevaluated at 6 and 12 months. LVEF progressively improved from 28% ± 4% at baseline to 42% ± 12% at 12 months (P PVC burden and successful sustained ablation. In patients with successful sustained ablation, a cutoff value of 13% PVC burden had a sensitivity of 100% and a specificity of 93% (area under the curve 99%) for removing ICD indication postablation. No sudden cardiac deaths or malignant ventricular arrhythmias were observed. In patients with frequent PVC and PP-ICD indication, ablation improves LVEF and, in most cases, allows removal of the indication. Withholding the ICD and reevaluating within 6 months of ablation seems to be a safe and appropriate strategy. Copyright © 2015 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

  1. The 1st EMBO workshop on PVC bacteria-Planctomycetes-Verrucomicrobia-Chlamydiae superphylum: exceptions to the bacterial definition?

    Science.gov (United States)

    Devos, Damien P; Jogler, Christian; Fuerst, John A

    2013-10-01

    The PVC superphylum is a phylogenetically supported collection of various related bacterial phyla that comprise unusual characteristics and traits. The 'PVC' abbreviation derives from Planctomycetes, Verrucomicrobia and Chlamydiae as members of this superphylum, while additional bacterial phyla are related. There has recently been increasing and exciting interest in the cell biology, physiology and ecology of members of this superphylum, including evolutionary implications of the complex cell organization of some species. It is timely that international researchers in the PVC superphylum field met to discuss these developments. The first meeting entirely dedicated to those bacteria, the EMBO workshop "PVC superphylum: Exceptions to the bacterial definition" was held at the Heidelberg University to catalyze the formation of a vital scientific community supporting PVC-bacterial research. More than 45 investigators from more than 20 countries (PIs, senior scientists and students) attended the meeting and produced a great starting point for future collaborative research. This Special Issue will focus on the EMBO-PVC meeting. This Perspective briefly summarizes the history of PVC-research, focusing on the key findings and provides a brief summary of the meeting with a focus on the major questions that arose during discussion and that might influence the research in the years to come.

  2. Study on the gamma radiolysis of poly (vinyl chloride). Application to the study on degradation by irradiation and leaching of industrial PVC

    International Nuclear Information System (INIS)

    Colombani, J.

    2006-01-01

    The works presented in this memory enter in the context of the management of plastic nuclear waste. This study was carried out on pure PVC and industrial PVC (formulated polymer). The radiolysis at high doses (up to 4 MGy) of pure PVC in anaerobic condition involves the formation of polyenyl radicals, polyenic sequences, hydrogen chloride and reactions of crosslinking. In aerobic condition, the radiolysis at high doses of pure PVC generates the formation of peroxyl radicals, hydrogen chloride, acid water, carboxylic acids, saturated or conjugated ketones and phenomena of scission. The production of HCl generated by irradiation of industrial PVC was carried out up to 40 MGy. The HCl formed by radiolysis is completely trapped by the calcic loads contained in industrial PVC and by the water produced by these reactions of trapping. A qualitative study on the formation of the products of radiolysis highlighted that the mechanisms of radiolysis of industrial PVC are different from those of pure PVC. This difference is due to the presence of additives belonging to the formulation of industrial PVC. The irradiation of plasticizers such as phthalic esters could induce the formation of radicals being able to react, by reaction of grafting, with the macro-radicals of PVC or with the polyenic sequences formed by radiolysis of PVC macromolecules. The results of leaching experiments tend to confirm this type of mechanism. (author)

  3. Comparative Effects of Ingested PVC Micro Particles With and Without Adsorbed Benzo(apyrene vs. Spiked Sediments on the Cellular and Sub Cellular Processes of the Benthic Organism Hediste diversicolor

    Directory of Open Access Journals (Sweden)

    Alessio Gomiero

    2018-04-01

    Full Text Available Plastic micro litter represents an emerging contaminant as well as a multiple stress agent in aquatic environments. Microplastics are found even in the remote areas of the world. Together with their occurrence in all environmental compartments, there is a growing concern about their potential to adsorb pollutants co-occurring in the environment. At present, little is known about this source of exposure for aquatic organisms in the benthic environment. Exposure conditions were set up to mimick the contribution of microplastics through different exposure routes. Potential biological effects resulting from these exposures were investigated in the model organism Hediste diversicolor, an annelid worm. Cellular effects including alterations of immunological responses, lysosomal compartment changes, mitochondrial activity, oxyradical production and onset of genotoxicity were assessed in coelomocytes while temporary and permanent effects of oxidative stress were also performed at tissue level. In this study polyvinylchloride (PVC microparticles were shown to adsorb benzo(apyrene with a time and dose-dependent relationship. The elevated bioavailability of the model pollutant after ingestion induced a clear pattern of biological responses. Toxicity mainly targeted impairment of cellular functioning and genotoxicity in H. diversicolor coelomocytes, while permanent effects of oxidative stress were observed at tissue level. Coelomocytes responded fast and with a higher degree of sensitivity to the adverse stimuli. The results showed that microplastic particles in sediments may play a significant role as vectors for organic pollutants. The highest adverse responses were observed in those H. diversicolor exposed to sediments spiked with PVC particles pre-incubated with B[a]P when compared against sediments spiked with B[a]P and plastic microparticles separately.

  4. Modeling malware propagation using a carrier compartment

    Science.gov (United States)

    Hernández Guillén, J. D.; Martín del Rey, A.

    2018-03-01

    The great majority of mathematical models proposed to simulate malware spreading are based on systems of ordinary differential equations. These are compartmental models where the devices are classified according to some types: susceptible, exposed, infectious, recovered, etc. As far as we know, there is not any model considering the special class of carrier devices. This type is constituted by the devices whose operative systems is not targeted by the malware (for example, iOS devices for Android malware). In this work a novel mathematical model considering this new compartment is considered. Its qualitative study is presented and a detailed analysis of the efficient control measures is shown by studying the basic reproductive number.

  5. The upper hand on compartment syndrome.

    LENUS (Irish Health Repository)

    Dolan, Roisin T

    2012-11-01

    Metacarpal fractures are common injuries, accounting for approximately 30% to 40% of all hand fractures and with a lifetime incidence of 2.5%. Traditionally regarded as an innocuous injury, metacarpal fractures tend to be associated with successful outcomes after closed reduction and immobilization. Hand compartment syndrome (HCS) is a rare clinical entity with potential devastating consequences in terms of loss of function and quality-of-life outcomes. We discuss the case of a 44-year-old woman presenting with multiple closed metacarpal fractures as a result of low-energy trauma, complicated by acute HCS. We review the presentation, clinical assessment, and optimal surgical management of acute HCS with reference to international literature.

  6. Fungal community assemblage of different soil compartments in mangrove ecosystem

    OpenAIRE

    Loganathachetti, Dinesh Sanka; Poosakkannu, Anbu; Muthuraman, Sundararaman

    2017-01-01

    The fungal communities of different soil compartments in mangrove ecosystem are poorly studied. We sequenced the internal transcribed spacer (ITS) regions to characterize the fungal communities in Avicennia marina root-associated soils (rhizosphere and pneumatophore) and bulk soil compartments. The rhizosphere but not pneumatophore soil compartment had significantly lower fungal species richness than bulk soil. However, bulk soil fungal diversity (Shannon diversity index) was significantly hi...

  7. Evaluation of the influence of water and oil derivatives absorption on PVC pipes; Avaliacao da influencia da absorcao de agua e de derivados de petroleo em tubulacoes de PVC

    Energy Technology Data Exchange (ETDEWEB)

    Carpio, D.C.F. del; D' Almeida, J.R.M., E-mail: dalmeida@puc-rio.b [Pontificia Univ. Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    PVC is the only polymer of large consume that is not totally obtained from petroleum, since it contains 57% of chlorine. As chlorine containing materials are resistant to bacteria rich environments, such as buried pipes, PVC is being used for fluid transportation, principally water, but it can also be considered as an alternative material for the transportation of other fluids. This work analyzes the aging behavior of PVC exposed to water, ethanol and diesel oil, using TGA, DSC, FT-IR and DR-X techniques. The results showed that the chemical structure of PVC is not affected by exposure to water and ethanol. For these fluids a dipolar interaction could be occurring, increasing at the beginning of the absorption process, the polymer thermal stability. The diesel oil caused plasticization, with reduction of the Tg since the beginning of the aging process. (author)

  8. Degradação biológica do PVC em aterro sanitário e avaliação microbiológica Biological degradation of PVC in landfill and microbiological evaluation

    Directory of Open Access Journals (Sweden)

    Ana M. C. Grisa

    2011-01-01

    Full Text Available O poli(cloreto de vinila (PVC é um dos polímeros utilizado no campo das embalagens e no setor calçadista, e, em função da sua aplicação diversificada, apresenta elevados percentuais em aterros domésticos e industriais. É um polímero amorfo podendo apresentar diferentes teores de plastificante e outros aditivos responsáveis pela sua estabilização, os quais podem influenciar no tempo de vida útil e nas propriedades do produto final. Este trabalho apresenta o estudo da degradação química e biológica de filmes de poli(cloreto de vinila flexível (PVC-f, no aterro sanitário São Giácomo, na cidade de Caxias do Sul/RS, antes e após 330 dias de disposição. As amostras de PVC-f antes e após a disposição no aterro sanitário foram avaliadas por análise térmica (TGA, estrutural (FT-IR e morfológica (MEV e MO. Observou-se que as amostras de PVC-f dispostas no aterro sanitário (PVC-fa, apresentam um único evento de perda de massa, em relação ao PVC-f não degradado ou virgem (PVC-fv, além de um maior % de perda de massa e de mudanças estruturais. Nas amostras de PVC-fa foram observadas modificações morfológicas importantes para descrever os fenômenos de degradação como erosão da superfície, bioerosão, que propiciaram a ação das leveduras, bactérias e fungos presentes no meio no polímero aterrado.The poly (vinyl chloride (PVC is one of the polymers used in the field of packing materials and footwear sector, and due its diversified applications, it has presented in a high percentage of domestic and industrial landfills It is an amorphous polymer and may present different levels of plasticizer and other additives responsible for its stabilization, which can influence the lifetime and the properties of the final product. This work presents the study of the chemical and biological degradation of poly (vinyl chloride flexible (PVC-f films, at São Giácomo landfill, in Caxias do Sul city after 330 days of

  9. The influence of soil and landfill leachate microorganisms in the degradation of PVC/PCL films cast from DMF

    Directory of Open Access Journals (Sweden)

    Adriana de Campos

    2012-01-01

    Full Text Available While the use of plastics continues to increase in our daily lives in a growing range products, these materials are very persistent in the environment. The blending of aliphatic polyesters with other thermoplastic polymers is a profitable way of producing materials with changed physical properties and biodegradability, which can facilitate microbial adhesion to the polymer matrix and help to reduce (post-consumer degradation time of these materials in landfills. This study was an investigation of the biodegradation of films of blends of poly(vinyl chloride (PVC and poly(ε-caprolactone (PCL by soil microorganisms and leachate, by means of respirometry, infrared absorption spectroscopy (FTIR, differential calorimetry scanning (DSC, scanning electron microscopy (SEM, contact angle and weight loss. The results showed that in the soil, the films suffered oxidative biodegradation. The PCL promoted degradation of the PVC in the film of PVC/PCL and the PVC inhibited the rapid degradation of the PCL.

  10. Morphology, thermal and mechanical properties of PVC/MMT nanocomposites prepared by solution blending and solution blending + melt compounding

    DEFF Research Database (Denmark)

    Madaleno, Liliana Andreia Oliveira; Schjødt-Thomsen, Jan; Pinto, José Cruz

    2010-01-01

    and solution blending + melt compounding The effects on morphology, thermal and mechanical properties of the PVC/MMT nanocomposites were studied by varying the amount of Na-MMT and OMMT in both methods SEM and XRD analysis revealed that possible intercalated and exfoliated structures were obtained in all....../MMT nanocomposites prepared by solution blending Vicar tests revealed a significant decrease in Vicar softening temperature of PVC/MMT nanocomposites prepared by solution blending + melt compounding compared to unfilled PVC The mechanical properties of the PVC/MMT nanocomposites were, in general, greatly improved......Two types of montmorillonite (MMT), natural sodium montmorillonite (Na-MMT) and organically modified montmorillonite (OMMT), in different amounts of 1, 2, 5, 10 and 25 phr (parts per hundred resin), were dispersed in rigid poly (vinyl chloride) by two different methods solution blending...

  11. Mechanical properties of oil palm empty fruit bunch (OPEFB) fiber reinforced PVC/ENR blend

    International Nuclear Information System (INIS)

    Gunasunderi Raju Nor Azowa Ibrahim; Mohammad Zaki Abd Rahman; Wan Md Zin Wan Yunus; Chantara Thevy Ratnam

    2004-01-01

    The effect of OPEFB fiber on the mechanical properties of the 50/50 PVC/ENR was investigated over a range of fiber loadings (0 to 30%). The OPEFB fiber reinforced PVC/ENR blend was prepared by using Haake Rheomixer at 150 degree C mixing temperature, 20 minutes total mixing time and 50 rpm rotor speed. The changes in tensile strength (Ts), Young's modulus, elongation break (Eb), flexural modulus, hardness and impact strength with the OPEFB fiber loadings were investigated. The results revealed that the flexural modulus, Young's modulus and hardness increased with the fiber loading. However, the impact strength, Ts and Eb found to decrease with the increase in fiber loading. (Author)

  12. PVC extrusion development and production for the NOvA neutrino experiment

    Science.gov (United States)

    Talaga, R. L.; Grudzinski, J. J.; Phan-Budd, S.; Pla-Dalmau, A.; Fagan, J. E.; Grozis, C.; Kephart, K. M.

    2017-07-01

    We have produced large and highly-reflective open-cell PVC extrusions for the NOvA neutrino oscillation experiment. The extrusions were sealed, instrumented, assembled into self-supporting detector blocks, and filled with liquid scintillator. Each Far Detector block stands 15.7 m high, is 15.7 m wide and 2.1 m thick. More than 22,000 extrusions were produced with high dimensional tolerance and robust mechanical strength. This paper provides an overview of the NOvA Far Detector, describes the preparation of the custom PVC powder, and the making of the extrusions. Quality control was a key element in the production and is described in detail.

  13. Evaluation of dosimetric characteristics of graphene oxide/PVC nanocomposite for gamma radiation applications

    Energy Technology Data Exchange (ETDEWEB)

    Feizi, Shahzad; Malekie, Shahryar; Ziaie, Farhood [Nuclear Science and Technology Research Institute (NSTRI), Karaj (Iran, Islamic Republic of). Radiation Application Research School; Rahighi, Reza; Tayyebi, Ahmad [Univ. of Technology, Tehran (Iran, Islamic Republic of). Dept. of Physics

    2017-04-01

    Graphene oxide-polyvinyl chloride composite was prepared using tetrahydrofuran solvent-assisted dispersion of characterized nano flakes of graphene oxide in polymer matrix. Electrical percolation threshold of GO/PVC nanocomposite was determined via a finite element simulation method with a 2D model and compared with experimental results. A conductive cell with two silver coated walls was designed and fabricated for exploring dosimetric properties of the composite. Some characteristics of the new nanocomposite such as linearity of dose response, repeatability, sensitivity and angular dependence are investigated. According to 2D proposed method, obtained data associated to electrical conductivity of the GO/polymer composite for PVC matrix plotted in different GO weight percentages and had good compatibility (validity) with experimental data. The dose response is linear in the 17-51 mGy dose range and it can be introduced for gamma radiation dosimetry in diagnostic activities.

  14. Functionalization of PVC membrane with ss oligonucleotides for a potentiometric biosensor.

    Science.gov (United States)

    Shishkanova, T V; Volf, R; Krondak, M; Král, V

    2007-05-15

    A novel application of a single stranded (ss) oligonucleotide as an active component of polymeric membrane in an ion-selective electrode (ISE) is described. The original oligonucleotides, oligo(dA)(15), modified by cholesterol, triphenylmethyl and hexadecyl derivatives, were immobilized into poly(vinyl chloride) (PVC) membrane using extraction protocol. In parallel, the adsorption protocol was used to immobilize unmodified oligo(dA)(15) on the PVC membrane based on tridodecylmethyammonium chloride (TDDMA(+)Cl(-)). Immobilization of ss oligonucleotide probe through spacer was more effective for the potentiometric detection of the hybridization between complementary oligonucleotides. It was found that cholesterol-oligo(dA)(15) modified membranes were sensitive toward complementary oligo(dT)(15) in the concentration range 2-80 nM at pH 7. An explanation for the detection mechanism is proposed.

  15. Utilization of Agrowaste Polymers in PVC/NBR Alloys: Tensile, Thermal, and Morphological Properties

    Directory of Open Access Journals (Sweden)

    Ahmad Mousa

    2012-01-01

    Full Text Available Poly(vinyl chloride/nitrile butadiene rubber (PVC/NBR alloys were melt-mixed using a Brabender Plasticorder at 180∘C and 50 rpm rotor speed. Alloys obtained by melt mixing from PVC and NBR were formulated with wood-flour- (WF- based olive residue, a natural byproduct from olive oil extraction industry. WF was progressively increased from 0 to 30 phr. The effects of WF loadings on the tensile properties of the fabricated samples were inspected. The torque rheometry, which is an indirect indication of the melt strength, is reported. The pattern of water uptake for the composites was checked as a function WF loading. The fracture mode and the quality of bonding of the alloy with and without filler are studied using electron scanning microscope (SEM.

  16. Viability of use of PVC tubes in solar collectors: an analysis of materials

    Directory of Open Access Journals (Sweden)

    Luiz Guillherme Meira de Souza

    2003-06-01

    Full Text Available This paper presents a study of the inherent degradations of PVC tubes due to the thermal effect and ultraviolet solar radiation. The approach relates its causes and its effect of use of the PVC tubes as elements to absorption, forming a coil, in solar collectors for water heating. It is demonstrated that such degradations can be burst through the use of an outflow and an appropriate regimen of work, as well as of a protective layer for the tubes, in this case black ink used to magnify its absorption. The results of the properties of tubes that had been exposed to the degradation effect for up to five years are presented. The viability of use of this type of collector is demonstrated through comparative analysis of tubes exposed and not exposed to the sun, concluding for the low cost, easy assembly and maintenance of the system.

  17. EVALUATION METHOD OF SEISMIC PERFORMANCE OF CABLE IN SUPERANNUATED TELECOMMUNICATION CONDUITS REINFORCED BY PVC LINING

    Science.gov (United States)

    Tanaka, Koji; Okutsu, Masaru; Yamazaki, Yasushi; Katagiri, Shin; Suzuki, Takanobu; Sugiyama, Toshiyuki

    The telecommunication conduits are needed to protect underground cables from damages due to earthquakes.However, the seismic capacity is being degraded due to the superannuated conduits that were constructed during the high-growth economic period.To sustain the reliability of the conduits efficiently through maintenance is the current challenge. In this paper, we have evaluated to determine whether the seismic capacity can be improved by reinforcing inside tube wall of conduit with PVC lining by grasping as well as analyzing the damages of the telecommunication conduit due to the Chuetsu Offshore Earthquake in Niigata Prefecture through field study and using seismic deformation method. As the result, it was confirmed that the enhancement of the seismic capacity is indeed possible by applying PVC lining to the superannuated conduits.

  18. Preparation of Drug-loaded Chitosan Microspheres and Its Application in Paper-based PVC Wallpaper

    Science.gov (United States)

    Lin, Hui; Chen, Lihui; Yan, Guiyang; Chen, Feng; Huang, Liulian

    2018-03-01

    By screening through test, it was found that the drug-loaded chitosan microspheres with the average particle size of 615 nm may be prepared with NaF as the mold-proof drug, chitosan as the drug carrier and sodium tripolyphosphate as the cross-linking agent; and they can improve the aspergillus niger-proof effect if loaded onto the base paper surface of the paper-based PVC wallpaper. The results show that NaF and chitosan have mold-proof synergistic effects; the mold-proof effect of the wallpaper may be improved by increasing the dose of chitosan; when the mass ratio of NaF, sodium tripolyphosphate and chitosan was 2:7:28, the paper-based PVC wallpaper with good mold-proof property can be prepared.

  19. Tripmultiplet-state dynamics of manganese(III porphyrin fabricated into PVC film

    Directory of Open Access Journals (Sweden)

    Jeong-Hyon Ha

    2011-10-01

    Full Text Available Luminescence lifetimes of anion complexes of manganese(III porphyrins incorporated in the PVC polymer film were investigated by the time-correlated single photon counting (TCSPC method. The tripquintet state lifetimes (tens of picoseconds which had been measured in the solution phase were reduced to the hundreds of picoseconds regime in the polymer solid phase when the internal motions of porphyrin moieties are restricted by the PVC polymer matrix. The main effects of bulkier anion ligation on photophysical properties were the increment of effective void volume. The increase of lifetime constants in the stiff polymer matrix was largest in case of the smallest anion ligation due to the restriction of internal motion induced by local polymer structure having the smaller void volume.

  20. A PVC/polypyrrole sensor designed for beef taste detection using electrochemical methods and sensory evaluation.

    Science.gov (United States)

    Zhu, Lingtao; Wang, Xiaodan; Han, Yunxiu; Cai, Yingming; Jin, Jiahui; Wang, Hongmei; Xu, Liping; Wu, Ruijia

    2018-03-01

    An electrochemical sensor for detection of beef taste was designed in this study. This sensor was based on the structure of polyvinyl chloride/polypyrrole (PVC/PPy), which was polymerized onto the surface of a platinum (Pt) electrode to form a Pt-PPy-PVC film. Detecting by electrochemical methods, the sensor was well characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The sensor was applied to detect 10 rib-eye beef samples and the accuracy of the new sensor was validated by sensory evaluation and ion sensor detection. Several cluster analysis methods were used in the study to distinguish the beef samples. According to the obtained results, the designed sensor showed a high degree of association of electrochemical detection and sensory evaluation, which proved a fast and precise sensor for beef taste detection. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Effect of DPK flame retardant on combustion characteristics and fire safety of PVC membrane

    Directory of Open Access Journals (Sweden)

    Yu Xia

    2017-09-01

    Full Text Available In this work, the performances of PVC membrane with DPK flame retardant and without flame retardant were investigated under external radiation flux. The experimental results showed that the addition of DPK flame retardant can greatly reduce the peak heat release, total heat release of the material, and increase the time to peak heat release, time to ignition and the production of poisonous gas CO. By introducing the mathematical evaluation model and specifying the reliable evaluation indexes, the safety indexes of two kinds of materials are obtained. The results showed that by adding the flame retardant, the safety indexes of the PVC membranes were increased to 161% and 156% under 40 kw/m2 and 50 kw/m2 respectively, which is accordant to the result of experiments and suggest that the presence of DPK has a good flame retardant effect.

  2. The pvc operon regulates the expression of the Pseudomonas aeruginosa fimbrial chaperone/usher pathway (cup) genes.

    Science.gov (United States)

    Qaisar, Uzma; Luo, Liming; Haley, Cecily L; Brady, Sean F; Carty, Nancy L; Colmer-Hamood, Jane A; Hamood, Abdul N

    2013-01-01

    The Pseudomonas aeruginosa fimbrial structures encoded by the cup gene clusters (cupB and cupC) contribute to its attachment to abiotic surfaces and biofilm formation. The P. aeruginosa pvcABCD gene cluster encodes enzymes that synthesize a novel isonitrile functionalized cumarin, paerucumarin. Paerucumarin has already been characterized chemically, but this is the first report elucidating its role in bacterial biology. We examined the relationship between the pvc operon and the cup gene clusters in the P. aeruginosa strain MPAO1. Mutations within the pvc genes compromised biofilm development and significantly reduced the expression of cupB1-6 and cupC1-3, as well as different genes of the cupB/cupC two-component regulatory systems, roc1/roc2. Adjacent to pvc is the transcriptional regulator ptxR. A ptxR mutation in MPAO1 significantly reduced the expression of the pvc genes, the cupB/cupC genes, and the roc1/roc2 genes. Overexpression of the intact chromosomally-encoded pvc operon by a ptxR plasmid significantly enhanced cupB2, cupC2, rocS1, and rocS2 expression and biofilm development. Exogenously added paerucumarin significantly increased the expression of cupB2, cupC2, rocS1 and rocS2 in the pvcA mutant. Our results suggest that pvc influences P. aeruginosa biofilm development through the cup gene clusters in a pathway that involves paerucumarin, PtxR, and different cup regulators.

  3. Fluorescence enhancement of imidazolium ionic liquid by its confinement on PVC for in situ selective quantification of hemoglobin.

    Science.gov (United States)

    Shu, Yang; Han, Lu; Wang, Xiaofeng; Chen, Xuwei; Wang, Jianhua

    2013-11-27

    A hydrophilic ionic liquid (methylimidazolium chloride, NmimCl)-polyvinyl chloride ionomer (NmimCl-PVC) was prepared by immobilizing and confining N-methylimidazole onto PVC chains. The NmimCl-PVC ionomer exhibits a 4-fold enhancement on the fluorescence intensity with respect to that of NmimCl, attributing to the confinement of ionic liquid by the PVC chain. The fluorescence is excitation-dependent with a maximum at λem 430 nm when excited at 325 nm. In addition, the fluorescence intensity of NmimCl-PVC ionomer increases remarkably with the loading ratio of N-methylimidazole in the range of 4.3-15.1%. The fluorescence quantum yield and lifetime were derived to be 0.112/7.1 ns for the NmimCl-PVC ionomer and 0.063/8.8 ns for NmimCl. Furthermore, hemoglobin is selectively adsorbed by NmimCl-PVC and causes significant fluorescence quenching of the ionomer via dynamic quenching and energy transfer between NmimCl-PVC and hemoglobin. A solid surface fluorimetric procedure was developed for surface adsorption and preconcentration of hemoglobin followed by in situ detection. A linear dynamic range of 0.3-26.2 μg mg(-1) is achieved with a detection limit of 0.1 μg mg(-1). Regarding hemoglobin in aqueous solution, the linear range 5-300 μg mL(-1) is achieved along with a detection limit of 2 μg mL(-1).

  4. Desenvolvimento de PVC reforçado com fibras de vidro longas para fabricação de produtos moldados Long glass fiber reinforcement of PVC molding compounds

    Directory of Open Access Journals (Sweden)

    Leandro H. Grizzo

    2011-01-01

    Full Text Available Neste trabalho foi desenvolvido um método para reforçar PVC rígido com fibras de vidro longas através da incorporação pelo processo de recobrimento da fibra contínua com um composto de PVC plastificado. Posteriormente o filamento foi picotado para a formação de grânulos, com fibras de vidro já incorporadas, que foram misturados mecanicamente ao PVC rígido granulado para alimentação direta por moldagem. A moldagem por injeção direta foi realizada com sucesso não sendo necessário a compostagem prévia, o que foi considerado conveniente, pois reduziu as etapas de processamento da resina de PVC e que proporcionou, possivelmente, redução de custos, redução da degradação do comprimento médio das fibras de vidro e diminuição da possibilidade de degradação da resina de PVC. O reforçamento do PVC rígido com 20% em massa de fibras de vidro longas de comprimento inicial entre 13 e 14 mm resultou em adequadas propriedades mecânicas, bem superiores ao PVC rígido não reforçado. Os módulos (tração e flexão e a resistência ao impacto Charpy praticamente dobraram, mesmo com os compósitos apresentando grande quantidade de plastificante em sua formulação, que possibilita ao PVC ser utilizado em outras aplicações não antes possíveis como em peças técnicas de engenharia.In this paper, a method to reinforce rigid PVC with long glass fibers (LGF was developed through the incorporation of continuous glass fibers, as rovings, with plasticized vinyl matrix prepared by the wire coating technique. The plasticized vinyl rovings were pelletized. The pellets (13-14 mm were then blended to a granulated rigid PVC formulation and directly injection molded as testing specimens. The direct injection molding, eliminating the preliminary melt-compounding process, was achieved successfully, which was considered convenient because it reduced the number of processing steps, which allowed cutting expenses, reduced the deterioration of the

  5. Analysis of plasticizers in PVC medical devices: Performance comparison of eight analytical methods.

    Science.gov (United States)

    Bernard, L; Bourdeaux, D; Pereira, B; Azaroual, N; Barthélémy, C; Breysse, C; Chennell, P; Cueff, R; Dine, T; Eljezi, T; Feutry, F; Genay, S; Kambia, N; Lecoeur, M; Masse, M; Odou, P; Radaniel, T; Simon, N; Vaccher, C; Verlhac, C; Yessad, M; Décaudin, B; Sautou, V

    2017-01-01

    A wide variety of medical devices (MDs) used in hospitals are made of flexible plasticized polyvinylchloride (PVC). Different plasticizers are present in variable amounts in the PVC matrix of the devices and can leach out into the infused solutions and may enter into contact with the patients. The ARMED 1 project aims to assess the migration of these plasticizers from medical devices and therefore the level of exposure in patients. For the first task of the project, eight methods were developed to directly detect and quantify the plasticizers in the PVC matrix of the MDs. We compared the overall performances of the analytical methods using standardized and validated criteria in order to provide the scientific community with the guidance and the technical specifications of each method for the intended application. We have shown that routine rapid screening could be performed directly on the MDs using the FTIR technique, with cost-effective analyses. LC techniques may also be used, but with limits and only with individual quantification of the main plasticizers expected in the PVC matrix. GC techniques, especially GC-MS, are both more specific and more sensitive than other techniques. NMR is a robust and specific technique to precisely discriminate all plasticizers in a MD but is limited by its cost and its low ability to detect and quantify plasticizer contamination, e.g. by DEHP. All these results have been confirmed by a real test, called the " blind test " carried out on 10 MD samples. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Speed of Sound versus Temperature Using PVC Pipes Open at Both Ends

    Science.gov (United States)

    Bacon, Michael E.

    2012-01-01

    In this paper we investigate the speed of sound in air as a function of temperature using a simple and inexpensive apparatus. For this experiment it is essential that the appropriate end corrections be taken into account. In a recent paper the end corrections for 2-in i.d. (5.04-cm) PVC pipes open at both ends were investigated. The air column…

  7. Application of electrostatic separation to the recycling of plastic wastes: separation of PVC, PET, and ABS.

    Science.gov (United States)

    Park, Chul-Hyun; Jeon, Ho-Seok; Yu, Hyo-Shin; Han, Oh-Hyung; Park, Jai-Koo

    2008-01-01

    Plastics are widely used in everyday life as a useful material, and thus their consumption is growing at a rate of about 5% per year in Korea. However, the constant generation of plastic wastes and their disposal generates environmental problems along with economic loss. In particular, mixed waste plastics are difficult to recycle because of their inferior characteristics. A laboratory-scale triboelectrostatic separator unit has been designed and assembled for this study. On the basis of the control of electrostatic charge, the separation of three kinds of mixed plastics, polyvinyl chloride (PVC), poly(ethylene terephthalate) (PET), and acrylonitrile-butadiene-styrene (ABS), in a range of similar gravities has been performed through a two-stage separation process. Polypropylene (PP) and high-impact polystyrene (HIPS) were found to be the most effective materials for a tribo-charger in the separation of PVC, PET, and ABS. The charge-to-mass ratio (nC/g) of plastics increased with increasing air velocity in the tribo charger. In the first stage, using the PP cyclone charger, the separation efficiency of particles considerably depended on the air velocity (10 m/s), the relative humidity ( 20 kV), and the splitter position (+2 cm from the center) in the triboelelctrostatic separator unit. At this time, a PVC grade of 99.40% and a recovery of 98.10% have successfully been achieved. In the second stage, using the HIPS cyclone charger, a PET grade of 97.80% and a recovery of 95.12% could be obtained under conditions of 10 m/s, over 25 kV, a central splitter position, and less than 40% relative humidity. In order to obtain 99.9% PVC grade and 99.3% PET grade, their recoveries should be sacrificed by 20.9% and 27%, respectively, with moving the splitter from the center to a (+)6 cm position.

  8. Production of pre-basic potato seed by polyvinyl chloride PVC: articulate gutters hydroponic system

    Directory of Open Access Journals (Sweden)

    Jonny Everson Scherwinski-Pereira

    2009-10-01

    Full Text Available The development of more efficient and productive systems for pre-basic seed potato production would improve the quality of the propagative material used by the potato growers, directly affecting the crop yields. A two-year experiment was carried out to evaluate the potato pre-basic seed production by two types of hydroponic systems (fibrocement tiles and articulated PVC gutters, two cultivars (`Baronesa` and `Eliza` and two types of propagative material (plants coming from in vitro culture and minitubers. The PVC gutters system was highly efficient. When using minitubers, this system reached multiplication rates up to 74 tubers per plant. Minitubers were more productive than in vitro plants, independent of cultivar and hydroponic system utilized.Um experimento realizado por dois anos consecutivos avaliou a produção de sementes pré-básicas de batata por meio de sistemas de cultivo hidropônico. O trabalho testou a combinação de dois sistemas de cultivo (telha de fibrocimento e calhas de PVC articuladas, duas cultivares (Baronesa e Eliza e dois tipos de material propagativo (plântulas oriundas do cultivo in vitro e minitubérculos. O sistema de calhas de PVC foi altamente eficiente. Quando foi utilizado minitubérculos, este sistema alcançou taxas de multiplicação de até 74 tubérculos por planta. De modo geral, o uso de minitubérculos como material propagativo apresentou os melhores resultados de produtividade quando comparada ao material in vitro, independentemente da cultivar e sistemas hidropônicos utilizados.

  9. SORPTION OF AROMA COMPOUNDS IN PET AND PVC DURING THE STORAGE OF A STRAWBERRY SYRUP

    OpenAIRE

    2007-01-01

    Abstract The sorption of 14 aroma compounds into PET and PVC was monitored during one year storage of a strawberry syrup. Their concentrations in the syrup and in the polymer were assessed during storage and compared with previously published results obtained with glass bottles. Apparent partition coefficients between the polymer and the syrup (noted Kapp) were estimated from experimental kinetics without reaching the equilibrium Kapp values were optimally identified from the k...

  10. Mechanical behavior of styrene grafted PVC films by electron beam irradiation

    International Nuclear Information System (INIS)

    Cardoso, Jessica R.; Moura, Eduardo; Somessari, Elisabeth S.R.; Silveira, Carlos G.; Paes, Helio A.; Souza, Carlos A.; Manzoli, Jose E.; Geraldo, Aurea B.C.

    2011-01-01

    The polyvinyl chloride (PVC) is a technological and low cost polymer, however it presents high sensitivity to high energy irradiation because of the weakness of carbon-chloride bond face to carbon-carbon and carbon-hydrogen bonds. Grafting is a type of co-polymerization process that can allow it an increase of mechanical characteristics. The aim of this work is to evaluate the mechanical properties of styrene grafted PVC by electron beam irradiation using mutual and pre-irradiation methods to verify the mechanical resistance changes of obtained product whether grafting process is applied from non-irradiated or from pre-irradiated substrates. The irradiation procedures were performed in atmosphere air or inert atmosphere and the irradiation conditions comprised doses from 10 kGy to 100 kGy and dose rates of 2.2 kGy/s and 22.4 kGy/s. The styrene grafted samples were analyzed by gravimetry to determinate the grafting yield; the final values have been averaged from a series of three measurements. The Mid-A TR-FTIR was the spectrophotometer technique used for qualitative/semi-quantitative analysis of grafted samples. The Young's module and tensile strength of pre-irradiated and grafted PVC samples at both methods were measured at a Lloyd LXR tensile tester at a cross-head speed of 10.00 mm/min. We observed the decrease of Young's module and tensile strength with the increase of absorbed dose at pre-irradiated PVC samples. These mechanical parameters results are discussed. (author)

  11. THE STUDY OF TECHNOLOGICAL PROPERTIES OF PLASTISOLS BASED EMULSION PVC FILLED WITH CHALK GIDROFOBIZIROVANNYM

    Directory of Open Access Journals (Sweden)

    V. A. Sedykh

    2014-01-01

    Full Text Available Baby toys are made using the centrifugal molding plastisol based emulsion of polyvinyl chloride plasticized with dioctylphthalate. To reduce cost and decrease biotelemetry the dioctylphthalate on the surface of the product domestic toys than toys produced in China, there was a necessity of introduction of the filler is chalk from different manufacturers. By using a Brookfield vis-cometer PV-D was studied rheology of filled hydrophobized chalk PVC plastisols in storage conditions for up to 72 hours at temperatures of 14-20°C. It was found that the flow plastisols consistent with pseudo-plastic fluids. Given the flow rates of emulsion PVC plastisols filled to 35 % of the mass. hydrophobized chalk. The influence of the content of the plasticizer dioctylphthalate in a narrow interval (37,0 - 41,4 % of the mass. on the viscosity of polymer pastes and the kinetics of its changes during storage. Revealed a linear dependence of the viscosity of the filled hydrophobized chalk plastisols on the speed of rotation of the spindle of the viscometer and during storage. Given the rate of expansion changes the viscosity of the plastisols of the speed of rotation of the spindle of the viscometer, the rate of change in viscosity and calculation of the initial viscosity. Determined the stability of the dispersion hydrophobized chalk in a colloidal solution of PVC in dioctylphthalate during storage. We determined the variation of the content of chalk (ash with top and bottom layers plastisols height 8 cm after 24 hours storage. It is proved that the temperature of the preparation and storage of polymer pastes were determining factors in the regulation of such technological properties of PVC plastisols in the presence hydrophobized chalkas viscosity, stability of the dispersion of chalk and, consequently, the efficiency of distribution plastisols in the form of a centrifugal molding.

  12. Personal exposure to ultrafine particles from PVC welding and concrete work during tunnel rehabilitation.

    Science.gov (United States)

    Jørgensen, Rikke Bramming; Buhagen, Morten; Føreland, Solveig

    2016-07-01

    To investigate the exposure to number concentration of ultrafine particles and the size distribution in the breathing zone of workers during rehabilitation of a subsea tunnel. Personal exposure was measured using a TSI 3091 Fast Mobility Particle Sizer (FMPS), measuring the number concentration of submicrometre particles (including ultrafine particles) and the particle size distribution in the size range 5.6-560 nm. The measurements were performed in the breathing zone of the operators by the use of a conductive silicone tubing. Working tasks studied were operation of the slipforming machine, operations related to finishing the verge, and welding the PVC membrane. In addition, background levels were measured. Arithmetic mean values of ultrafine particles were in the range 6.26×10(5)-3.34×10(6). Vertical PVC welding gave the highest exposure. Horizontal welding was the work task with the highest maximum peak exposure, 8.1×10(7) particles/cm(3). Background concentrations of 4.0×10(4)-3.1×10(5) were found in the tunnel. The mobility diameter at peak particle concentration varied between 10.8 nm during horizontal PVC welding and during breaks and 60.4 nm while finishing the verge. PVC welding in a vertical position resulted in very high exposure of the worker to ultrafine particles compared to other types of work tasks. In evaluations of worker exposure to ultrafine particles, it seems important to distinguish between personal samples taken in the breathing zone of the worker and more stationary work area measurements. There is a need for a portable particle-sizing instrument for measurements of ultrafine particles in working environments. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  13. Improving the Healthiness of Sustainable Construction: Example of Polyvinyl Chloride (PVC)

    OpenAIRE

    Emina Kristina Petrović; Lydia K. Hamer

    2018-01-01

    With the increasing emphasis on sustainable construction, it has become important to better understand the impacts of common materials. This is especially paramount with the introduction of the United Nations (UN) Sustainable Development Goals (SDGs) which call for more comprehensive evaluations, adding many aspects of social consideration to the issues of environmental sustainability, including human health. Polyvinyl chloride (PVC)/vinyl can be seen as a material with potential for signific...

  14. Effects of silica composition on gas permeability of ENR/PVC ...

    African Journals Online (AJOL)

    At higher SiO2 loadings, the mechanical strength of the membrane decreased due to the agglomeration of SiO2 particles. Gas permeation test was done on ENR/PVC/SiO2 membranes using NO2 gas and CO2 gas. The permeability of both gasses increased with the amount of SiO2 added to the membrane, which attributed ...

  15. One step phase separation process to fabricate superhydrophobic PVC films and its corrosion prevention for AZ91D magnesium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Na; Li, Jicheng; Bai, Ningning; Xu, Lan; Li, Qing, E-mail: liqingswu@163.com

    2016-07-15

    Graphical abstract: - Highlights: • Independent superhydrophobic polyvinyl chloride (PVC) film was prepared by phase separation process. • The superhydrophobic PVC film showed excellent stability in acid, alkali and salt corrosive solutions. • This film was prepared on magnesium surface protecting it from corrosion. • This method was simple and universal. - Abstract: A one step, simple fabrication method to prepare independent superhydrophobic polyvinyl chloride (PVC) coating is reported in this paper. The rough surface structure and low surface energy could be simply obtained only by a phase separation process. The independent PVC superhydrophobic film was also applied on AZ91D magnesium alloy. Scanning electron microscopy (SEM), water contact angle measurements, electrochemical test and adhesion tests have been performed to characterize the surface morphology, wettability, anti-corrosion and adhesion strength of independent PVC film and superhydrophobic magnesium alloy respectively. The results indicated that whether it was the PVC film or superhydrophobic magnesium, they show static contact angles higher than 150°, excellent anti-corrosion effect and adhesion strength. We believed that the presented method could provide a straightforward and simple route to fabricate low-cost and anti-corrosion coating on various substrate materials. Moreover, this one step process may find potential application in the field of industry because of its simplicity and universality.

  16. Ultrasonic-promoted rapid preparation of PVC/TiO2-BSA nanocomposites: Characterization and photocatalytic degradation of methylene blue.

    Science.gov (United States)

    Mallakpour, Shadpour; Shamsaddinimotlagh, Sima

    2018-03-01

    In the present project in order to prevent agglomeration and better dispersion of TiO 2 nanoparticles (NPs) in the poly(vinyl chloride) (PVC) matrix, initially, the surface of TiO 2 NPs was covered by bovine serum albumin protein (BSA) via sonication method. Then, the TiO 2 -BSA powders were embedded into the PVC matrix using ultrasonic irradiations. With mechanical and magnetic stirring homogenous mixture was not obtained. So sonication process was very essential and vital. Physical, chemical and structural properties of the samples were investigated with various tools. Morphology studies showed the well distribution of spherical TiO 2 NPs in the PVC matrix. TGA analysis showed that nanocomposites (NCs) have higher thermal stability than the pristine polymer. The photocatalytic activity tests by destroying the methylene blue dye on the pristine TiO 2 NPs, TiO 2 -BSA NPs and PVC/TiO 2 -BSA NC 6 wt% were examined. The results showed that the photocatalytic activity of TiO 2 NPs was reduced in the presence of BSA and PVC. It can be concluded that the TiO 2 -BSA NPs and PVC/TiO 2 -BSA NC 6 wt% have UV shielding properties and can protect film from degradation by UV. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Sodium alginate/heparin composites on PVC surfaces inhibit the thrombosis and platelet adhesion: applications in cardiac surgery.

    Science.gov (United States)

    Gao, Wenqing; Lin, Tingting; Li, Tong; Yu, Meili; Hu, Xiaomin; Duan, Dawei

    2013-01-01

    Thrombosis and hemocyte damage are the main problems of applied non-coated biomaterials to cardiac surgery that remain unsolved. The present study is aimed at the chemical modification of polyvinyl chloride (PVC) for applications in cardiac surgery and the biological property assessment of modified PVC. Sodium alginate (SA)/heparin (HEP) composites were covalently immobilized onto the surface of the PVC pipeline. The surface grafting density and protein adsorption were determined by ultraviolet spectrophotometry. The surface contact angles were evaluated by contact-angle measurement, whereas the surface characteristics were evaluated by Fouriertransform infrared spectroscopy. Blood coagulation time and platelet adhesion were measured using an automated blood coagulation analyzer and a hemocytometer, respectively. Surface morphologies of the thrombus and platelets were evaluated by scanning electron microscopy. The immobilization of SA/HEP reduced the contact angles of the coated surface. Protein adsorption was reduced by the immobilization of SA. The activated partial thrombin time and thrombin time of the coated PVC were significantly prolonged as compared with the non-coated PVC. Platelet adhesion and thrombus formation were all reduced by the immobilization of HEP. The results revealed that the SA/HEP coating can improve the antithrombogenicity of the PVC pipeline, as well as improve its biocompatibility and hemocompatibility, which are essential for cardiac pulmonary bypass surgery.

  18. Electroless plating of PVC plastic through new surface modification method applying a semi-IPN hydrogel film

    International Nuclear Information System (INIS)

    Wang, Ming-Qiu; Yan, Jun; Du, Shi-Guo; Li, Hong-Guang

    2013-01-01

    A novel palladium-free surface activation process for electroless nickel plating was developed. This method applied a semi-Interpenetrating Polymer Network (semi-IPN) hydrogel film to modify the poly(vinyl chloride) (PVC) surface by chemical bonds. The activation process involved the formation of semi-IPN hydrogel film on the PVC surface and the immobilization of catalyst for electroless plating linking to the pretreated substrate via N-Ni chemical bond. The hydrogel layer was used as the chemisorption sites for nickel ions, and the catalyst could initiate the subsequent electroless nickel plating onto the PVC surface. Finally, a Ni–P layer was deposited on the nickel-activated PVC substrate by electroless plating technique. The composition and morphology of nickel-plated PVC foils were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The results of SEM and XRD show that a compact and continuous Ni–P layer with amorphous nickel phase is formed on the PVC surface. EDS shows that the content of the nickel and the phosphorus in the deposits is 89.4 wt.% and 10.6 wt.%, respectively.

  19. Electroless plating of PVC plastic through new surface modification method applying a semi-IPN hydrogel film

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ming-Qiu, E-mail: mqwang1514@163.com; Yan, Jun; Du, Shi-Guo; Li, Hong-Guang

    2013-07-15

    A novel palladium-free surface activation process for electroless nickel plating was developed. This method applied a semi-Interpenetrating Polymer Network (semi-IPN) hydrogel film to modify the poly(vinyl chloride) (PVC) surface by chemical bonds. The activation process involved the formation of semi-IPN hydrogel film on the PVC surface and the immobilization of catalyst for electroless plating linking to the pretreated substrate via N-Ni chemical bond. The hydrogel layer was used as the chemisorption sites for nickel ions, and the catalyst could initiate the subsequent electroless nickel plating onto the PVC surface. Finally, a Ni–P layer was deposited on the nickel-activated PVC substrate by electroless plating technique. The composition and morphology of nickel-plated PVC foils were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The results of SEM and XRD show that a compact and continuous Ni–P layer with amorphous nickel phase is formed on the PVC surface. EDS shows that the content of the nickel and the phosphorus in the deposits is 89.4 wt.% and 10.6 wt.%, respectively.

  20. Electroless plating of PVC plastic through new surface modification method applying a semi-IPN hydrogel film

    Science.gov (United States)

    Wang, Ming-Qiu; Yan, Jun; Du, Shi-Guo; Li, Hong-Guang

    2013-07-01

    A novel palladium-free surface activation process for electroless nickel plating was developed. This method applied a semi-Interpenetrating Polymer Network (semi-IPN) hydrogel film to modify the poly(vinyl chloride) (PVC) surface by chemical bonds. The activation process involved the formation of semi-IPN hydrogel film on the PVC surface and the immobilization of catalyst for electroless plating linking to the pretreated substrate via Nsbnd Ni chemical bond. The hydrogel layer was used as the chemisorption sites for nickel ions, and the catalyst could initiate the subsequent electroless nickel plating onto the PVC surface. Finally, a Ni-P layer was deposited on the nickel-activated PVC substrate by electroless plating technique. The composition and morphology of nickel-plated PVC foils were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The results of SEM and XRD show that a compact and continuous Ni-P layer with amorphous nickel phase is formed on the PVC surface. EDS shows that the content of the nickel and the phosphorus in the deposits is 89.4 wt.% and 10.6 wt.%, respectively.

  1. Oil palm empty fruit bunch (OPEFB) fiber reinforced PVC/ENR blend-electron beam irradiation

    International Nuclear Information System (INIS)

    Ratnam, Chantara Thevy; Raju, Gunasunderi; Wan Md Zin Wan Yunus

    2007-01-01

    The effect of irradiation on the tensile properties of oil palm empty fruit bunch (OPEFB) fiber reinforced poly(vinyl chloride)/epoxidized natural rubber (PVC/ENR) blends were studied. The composites were prepared by mixing the fiber and the PVC/ENR blend using HAAKE Rheomixer at 150 deg. C. The composites were then irradiated by using a 3.0 MeV electron beam machine at doses ranging from 0 to 100 kGy in air and room temperature. The tensile strength, Young's modulus, elongation at break and gel fraction of the composites were measured. Comparative studies were also made by using poly(methyl acrylate) grafted OPEFB fiber in the similar blend system. An increase in tensile strength, Young's modulus and gel fraction, with a concurrent reduction in the elongation at break (Eb) of the PVC/ENR/OPEFB composites were observed upon electron beam irradiation. Studies revealed that grafting of the OPEFB fiber with methyl acrylate did not cause appreciable effect to the tensile properties and gel fraction of the composites upon irradiation. The morphology of fractured surfaces of the composites, examined by a scanning electron microscope showed an improvement in the adhesion between the fiber and the matrix was achieved upon grafting of the fiber with methyl acrylate

  2. Effects of flow rate on the migration of different plasticizers from PVC infusion medical devices.

    Science.gov (United States)

    Bernard, Lise; Eljezi, Teuta; Clauson, Hélène; Lambert, Céline; Bouattour, Yassine; Chennell, Philip; Pereira, Bruno; Sautou, Valérie

    2018-01-01

    Infusion medical devices (MDs) used in hospitals are often made of plasticized polyvinylchloride (PVC). These plasticizers may leach out into infused solutions during clinical practice, especially during risk-situations, e.g multiple infusions in Intensive Care Units and thus may enter into contact with the patients. The migrability of the plasticizers is dependent of several clinical parameters such as temperature, contact time, nature of the simulant, etc… However, no data is available about the influence of the flow rate at which drug solutions are administrated. In this study, we evaluated the impact of different flow rates on the release of the different plasticizers during an infusion procedure in order to assess if they could expose the patients to more toxic amounts of plasticizers. Migration assays with different PVC infusion sets and extension lines were performed with different flow rates that are used in clinical practice during 1h, 2h, 4h, 8h and 24h, using a lipophilic drug simulant. From a clinical point of view, the results showed that, regardless of the plasticizer, the faster the flow rate, the higher the infused volume and the higher the quantities of plasticizers released, both from infusion sets and extension lines, leading to higher patient exposure. However, physically, there was no significant difference of the migration kinetics linked to the flow rate for a same medical device, reflecting complex interactions between the PVC matrix and the simulant. The migration was especially dependent on the nature and the composition of the medical device.

  3. Impact of the nature and concentration of plasticizers on the ability of PVC to sorb drug.

    Science.gov (United States)

    Al Salloum, H; Saunier, J; Aymes-Chodur, C; Barakat, H; Yagoubi, N

    2015-12-30

    The sorption of a drug by an infusion set may dramatically reduce the drug delivery efficiency. In this paper, we investigated how the drug sorption, in static conditions, is affected by the plasticizer's nature and ratio in the case of plasticized PVC, one of the most common material for infusion set tubing. Within the study, the drug concentration in diazepam solutions was studied after contact with PVC films containing different amounts of DEHP, DEHT, TOTM and DINCH® plasticizers. Moreover the partition coefficients between material and water were calculated. The drug sorption levels were equivalent for the different plasticizers and there was a plasticizer ratio for which the drug uptake was enhanced. As a consequence, the amount of sorbed drug might not be only linked to the amount of plasticizer in the film and to the solubility of the drug in the plasticizer alone: it must probably depend on specific interactions between plasticizer and PVC. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. Migration of plasticizers from PVC medical devices: Development of an infusion model.

    Science.gov (United States)

    Bernard, L; Cueff, R; Chagnon, Mc; Abdoulouhab, F; Décaudin, B; Breysse, C; Kauffmann, S; Cosserant, B; Souweine, B; Sautou, V

    2015-10-15

    Alternatives to DEHP plasticizers are used in various PVC medical devices (MD) for infusion. As they are able to migrate from these MDs into infused solutions, they may come into contact with patient. Different and specific clinical parameters influence their migration in at-risk situations such as infusion. In contrast to the regulations for Food Contact Materials (MCDA), there is currently no acceptable migration limits for the use of these plasticizers in clinical situations. In order to assess their migration, and thus control the risks linked to these MDs, we developed a migration model for the plasticizers in MDs. To this end, we applied a cross-disciplinary methodological process similar to that used in the food-processing industry, taking into account the MDs' conditions of use in clinical practice. The simulation model is simple and includes the following conditions: MD should be tested with a dynamic method that respects our established clinical assumption (2 L of infused solutions via 13 dm(2) of plasticized PVC), at a temperature of 25 °C and during 24 h of contact, using a 50/50 (v/v) ethanol/water simulant. This model could be proposed as a tool for the safety evaluation of the patients' exposure risk to plasticizers from PVC medical devices for infusions. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Spectroscopic analysis of PMMA/PVC blends containing CoCl2

    Directory of Open Access Journals (Sweden)

    N.S. Alghunaim

    2015-01-01

    Full Text Available Composites of polymethyl methacrylate (PMMA and polyvinyl chloride (PVC polymer blend containing different concentrations (⩽10 wt. of cobalt chloride (CoCl2 were prepared by casting techniques. The changes of the structural, spectroscopic, optical and thermal parameters of the samples are studied using different tools. FT-IR spectroscopy confirmed the complexation between the blends and Co+2-ions. The decrease or increase of IR band intensity with some shifts of other bands suggests an interaction and compatibility between PMMA/PVC blends with CoCl2 take place. The Ultra violet and visible (UV/Vis spectra indicated that the presence of band gap energy depends on increasing of CoCl2 contents. The absorption intensity of the samples doped with CoCl2 becomes faint lower than the pure blend. The values of energy gap for direct and indirect transition decreases with the increase of CoCl2 due to the presence of charge transfer between PMMA/PVC and CoCl2. The thermogravimetric analysis (TGA curves for all the samples have the same behavior and more steps of decomposition were observed. The reduction of mass loss for samples containing CoCl2 compared to the pure blend was observed and it was attributed to crosslink formation between the blend and CoCl2.

  6. Flame treatment for the selective wetting and separation of PVC and PET

    International Nuclear Information System (INIS)

    Pascoe, R.D.; O'Connell, B.

    2003-01-01

    Flame treatment has been used for many years to modify the surface of plastics to allow coatings to be added. The effect of the treatment is to produce hydrophilic species on the surface of the plastic making it water-wettable. The production of hydrophilic plastic surfaces is also required in the selective separation of plastics by froth flotation. For the process to be selective one plastic must be rendered hydrophilic while another remains hydrophobic. In this study the potential for separation of PVC and PET has been investigated. Flame treatment was shown to be very effective in producing a hydrophilic surface on both plastics, although the process was not selective under the conditions investigated. Raising the temperature of the plastics above their softening point produced a hydrophobic recovery. As the softening point of PVC was significantly lower than for PET it was possible to produce a significant difference in hydrophobicity, as judged using contact angle measurement. When immersed in water the contact angle of the PVC was found to be strongly dependent on the pH. Good separation efficiency of the two plastics was achieved by froth flotation from pH 4 to 9. One particular advantage of the technique is that no chemical reagents may be required in the flotation stage. The practicalities of designing a flake treatment system however have to be addressed before considering it to be a viable industrial process

  7. Mechanical, Spectroscopic and Micro-structural Characterization of Banana Particulate Reinforced PVC Composite as Piping Material

    Directory of Open Access Journals (Sweden)

    B. Dan-asabe

    2016-06-01

    Full Text Available A banana particulate reinforced polyvinyl chloride (PVC composite was developed with considerabley low cost materials having an overall light-weight and good mechanical properties for potential application as piping material. The specimen composite material was produced with the banana (stem particulate as reinforcement using compression molding. Results showed that density and elastic Modulus of the composite decreases and increases respectively with increasing weight fraction of the particulate reinforcement. The tensile strength increased to a maximum of 42 MPa and then decreased steadily. The composition with optimum mechanical property (42 MPa was determined at 8, 62 and 30 % formulation of banana stem particulates (reinforcement, PVC (matrix and Kankara clay (filler respectively with corresponding percentage water absorption of 0.79 %, Young’s Modulus of 1.3 GPa, flexural strength of 92 MPa and density of 1.24 g/cm3. Fourier Transform Infrared (FTIR analysis of the constituents showed identical bands within the range 4000–1000 cm-1 with renown research work. Scanning Electron Microscopy (SEM result showed fairly uniform distribution of constituents’ phases. X-Ray Fluorescence (XRF confirms the X-ray diffraction (XRD result of the presence of minerals of kaolinite, quartz, rutile and illite in the kaolin clay. Comparison with conventional piping materials showed the composite offered a price savings per meter length of 84 % and 25 % when compared with carbon steel and PVC material.

  8. Thermal stability of formulations of PVC irradiated with γ of 60

    International Nuclear Information System (INIS)

    Martinez P, M.E.; Carrasco A, H.; Castaneda F, A.; Benavides C, R.; Garcia R, S.P.

    2004-01-01

    The industry of cables and wires frequently use cable isolations with base of formulations of PVC, in those that stabilizer has usually been used with the help of heavy metals, as the lead, which is toxic. To solve the problem, from the 2002 one has come studying in combined form in the National Institute of Nuclear Research ININ and the Center of Investigation in Applied Chemistry CIQA, the modifications induced by the radiation in formulations with the help of vinyl poly chloride PVC. In these formulations, prepared with cross linking agent, plastifying industrial grade, stuff and non toxic stabilizers of calcium estearate and zinc industrial grade, it is sought to replace the stabilizer of Pb. For this were irradiated it test tubes of PVC with gamma radiation of cobalt 60 to three different dose in atmospheres of air and argon. Later it was determined their thermal stability at different times of heating and it was measured the Young modulus by means of thermo mechanical analysis. Those results obtained together with other techniques of characterization suggest that the irradiated proposed formulation can substitute the one stabilized with lead. (Author)

  9. Karakteristik sifat mekanik, ketahanan api dan pembakaran, dan morfologi nanokomposit campuran PVC dan LDPE

    Directory of Open Access Journals (Sweden)

    Arum Yuniari

    2014-06-01

    Full Text Available The purpose of the study was to determine the effect of addition of low density polyethylene (LDPE and flame retardant on mechanical properties, resistant to fire and burning and morphology from the mixture of polyvinyl chloride (PVC, LDPE, flame retardant, and nanoprecipitated calcium carbonate (NPCC as filler. The materials were mixed in laboplastomill at 215 ºC, torque speed 50 rpm, for 10 minutes. Nanocomposite was prepared by PVC/LDPE variations of 100/15; 100/20; 100/25; and 100/30 phr and flame retardant variations of 30 and 35 phr. The results showed that the hihger of LDPE in nanocomposite increased the hardness and impact resistance, however, it decreased the tensile strength, elongation at break, and density. Addition of flame retardant to the nanocomposites showed good resistance to fire and burning, and optimum mechanical properties were found in using of 35 phr flame retardant.The morphology of the nanocomposite, were observed by Scanning Electron Microscope (SEM confirmed that homogeneous mixture of LDPE dispersed in the PVC matrix.

  10. N-Epoxypropyl poly(p-phenylene terephthalamide) covalently and non-covalently coated multi-walled carbon nanotubes for PVC reinforcement

    Science.gov (United States)

    Pan, Fangwei; Qu, Rongjun; Jia, Xinhua; Sun, Changmei; Sun, Hushan; An, Kai; Mu, Yinglei; Ji, Chunnuan; Yin, Ping; Zhang, Ying

    2017-09-01

    Poly(p-phenylene terephthalamide) (PPTA) coated multi-walled carbon nanotubes (PPTA-MWNTs) showed an enhancement effect on the yield strength and Young's modulus of PVC composite films, but no improvement in toughness. In this paper, MWNTs were covalently and non-covalently coated by N-epoxypropyl PPTA (PPTA-ECH) to prepare PPTA-ECH-MWNTs-NH2-x and PPTA-ECH-MWNTs-x, which were used as additives to reinforce PVC composite films. It was found that the maximum yield strength, Young's modulus, and toughness of PPTA-ECH-MWNTs-NH2-x/PVC composite films increased by 227.84%, 201.56%, and 589.96%, respectively, in comparison to pure PVC, while those of PPTA-ECH-MWNTs-x/PVC composite films increased by 215.08%, 153.13%, and 540.81%, respectively. The maximum yield strength, maximum Young's modulus, and maximum toughness of both PPTA-ECH-MWNTs-NH2-x/PVC and PPTA-ECH-MWNTs-x/PVC showed significant improvement as compared to PPTA-MWNTs/PVC composite film and PPTA-MWNTs-NH2/PVC. This indicates that N-epoxypropyl PPTA covalently and non-covalently coated MWNTs are promising additives for reinforcing PVC.

  11. Unentangled star-shape poly(ε-caprolactone)s as phthalate-free PVC plasticizers designed for non-toxicity and improved migration resistance.

    Science.gov (United States)

    Choi, Woohyuk; Chung, Jae Woo; Kwak, Seung-Yeop

    2014-07-23

    We develop a nontoxic unentangled star-shape poly(ε-caprolactone) (UESPCL) plasticizer with excellent migration resistance for the production of phthalate-free flexible poly(vinyl chloride) (PVC) by means of the ring-opening polymerization of ε-caprolactone, initiated from the multifunctional core, combined with end-capping, and vacuum purification processes. UESPCL is a transparent liquid at room temperature and exhibits unentangled Newtonian behavior because of its extremely short branched segments. UESPCL is biologically safe without producing an acute toxicity response. Torque analysis measurements reveals that UESPCL offers a faster fusion rate and a higher miscibility with PVC compared to a typical plasticizer, di(2-ethylhexyl) phthalate (DEHP). The solid-state (1)H nuclear magnetic resonance (NMR) spectrum reveals that PVC and UESPCL are miscible with an average domain size of less than 8 nm. The flexibility and transparency of the PVC/UESPCL mixture, that is, phthalate-free flexible PVC, are comparable to the corresponding properties of the PVC/DEHP mixture, and the stretchability and fracture toughness of PVC/UESPCL are superior to the corresponding properties of the PVC/DEHP system. Most of all, PVC/UESPCL shows excellent migration resistance with a weight loss of less than 0.6% in a liquid phase, whereas DEHP migrated out of PVC/DEHP into a liquid phase with a weight loss of about 10%.

  12. Distal biceps brachii tendon rupture resulting in acute compartment syndrome.

    Science.gov (United States)

    Grandizio, Louis C; Suk, Michael; Feltham, Glen T

    2013-11-01

    Distal biceps brachii tendon rupture is an uncommon injury. Compartment syndrome of the upper arm is rarely described in the literature. The diagnosis of upper arm compartment syndrome requires a high index of suspicion, and emergent surgical treatment with fasciotomy in the acute setting is necessary to avoid devastating neurovascular complications. This article reports a case of acute compartment syndrome of the anterior compartment of the upper arm after a complete rupture of the distal biceps brachii tendon. A healthy 45-year-old man presented with increasing arm pain; paresthesia in the lateral antebrachial cutaneous nerve distribution; and a tense, swollen anterior compartment of his upper arm. Side port catheter absolute pressure measurement was 83 mm Hg with a diastolic blood pressure of 92 mm Hg. The patient underwent an emergent fasciotomy and was found to have a complete rupture of his distal biceps brachii tendon. He subsequently underwent distal biceps tendon repair and delayed primary closure of his incision. Postoperatively, his paresthesia improved and he has no neurological deficit. There is a paucity of case reports describing compartment syndrome after rupture of either the proximal or distal end of the biceps brachii tendon, and none of the reports describe compartment syndrome of the upper arm after rupture of the distal biceps tendon. This article highlights an unusual complication of an uncommon injury and reviews diagnostic and treatment principles for the management of acute compartment syndrome of the upper arm. Copyright 2013, SLACK Incorporated.

  13. 46 CFR 169.625 - Compartments containing diesel machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Compartments containing diesel machinery. 169.625 Section 169.625 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Machinery and Electrical Ventilation § 169.625 Compartments containing diesel machinery. (a) Spaces containing machinery must be...

  14. 9 CFR 354.241 - Cleaning of rooms and compartments.

    Science.gov (United States)

    2010-01-01

    ... light fixtures in the official plant shall be kept clean. (c) All docks and rooms shall be kept clean... compartments. Rooms, compartments, or other parts of the official plant shall be kept clean and in sanitary... rooms should be kept clean at all times. (e) Floors in live rabbit holding rooms shall be cleaned with...

  15. Fungal community assemblage of different soil compartments in mangrove ecosystem.

    Science.gov (United States)

    Sanka Loganathachetti, Dinesh; Poosakkannu, Anbu; Muthuraman, Sundararaman

    2017-08-17

    The fungal communities of different soil compartments in mangrove ecosystem are poorly studied. We sequenced the internal transcribed spacer (ITS) regions to characterize the fungal communities in Avicennia marina root-associated soils (rhizosphere and pneumatophore) and bulk soil compartments. The rhizosphere but not pneumatophore soil compartment had significantly lower fungal species richness than bulk soil. However, bulk soil fungal diversity (Shannon diversity index) was significantly higher than both pneumatophore and rhizosphere soil compartments. The different soil compartments significantly affected the fungal community composition. Pairwise sample analyses showed that bulk soil microbial community composition significantly different from rhizosphere and pneumatophore soil compartments. There was, however no significant difference observed between rhizosphere and pneumatophore soil fungal community composition and they shared relatively more OTUs between them. Further, there was a significant correlation observed between fungal community compositional changes and carbon or nitrogen availability of different soil compartments. These results suggest that few characteristics such as fungal richness and taxa abundance of rhizosphere and pneumatophore soil compartments were significantly different in mangrove ecosystem.

  16. Mathematical models for drug diffusion through the compartments of ...

    African Journals Online (AJOL)

    The Laplace transform and eigenvalue methods were used to obtain the solution of the ordinary differential equations concerning the rate of change of concentration in different compartments viz. blood and tissue medium. The drug concentration in the different compartments has been computed using numerical parameters ...

  17. Abdominal Compartment Syndrome Secondary to Chronic Constipation

    Directory of Open Access Journals (Sweden)

    Helene Flageole

    2011-01-01

    Full Text Available Abdominal compartment syndrome (ACS is defined as an elevated intraabdominal pressure with evidence of organ dysfunction. The majority of published reports of ACS are in neonates with abdominal wall defects and in adults following trauma or burns, but it is poorly described in children. We describe the unusual presentation of an 11-year-old boy with a long history of chronic constipation who developed acute ACS requiring resuscitative measures and emergent disimpaction. He presented with a 2-week history of increasing abdominal pain, nausea, diminished appetite and longstanding encopresis. On exam, he was emaciated with a massively distended abdomen with a palpable fecaloma. Abdominal XR confirmed these findings. Within 24 hours of presentation, he became tachycardic and oliguric with orthostatic hypotension. Following two enemas, he acutely deteriorated with severe hypotension, marked tachycardia, acute respiratory distress, and a declining mental status. Endotracheal intubation, fluid boluses, and vasopressors were commenced, followed by emergent surgical fecal disimpaction. This resulted in rapid improvement in vital signs. He has been thoroughly investigated and no other condition apart from functional constipation has been identified. Although ACS secondary to constipation is extremely unusual, this case illustrates the need to actively treat constipation and what can happen if it is not.

  18. Compartment in vertical flow reactor for ferruginous mine water

    Science.gov (United States)

    Hur, Won; Cheong, Young-Wook; Yim, Gil-Jae; Ji, Sang-Woo; Hong, Ji-Hye

    2014-05-01

    Mine effluents contain varying concentrations of ferrous ion along with other metal ions. Fe(II) that quickly oxidizes to form precipitates in the presence of oxygen under net alkaline or neutral conditions. Thus, passive treatment methods are designed for the mine water to reside in an open containment area so as to allow simultaneous oxidation and precipitation of Fe(II), such as in a lagoon or an oxidation pond. A vertical flow reactor (VFR) was also suggested to remediate ferruginous mine drainage passing down through an accreting bed of ochre. However, VFR has a limited operation time until the system begins to overflow. It was also demonstrated that two-compartment VFR has a longer operation time than single compartment VFR of same size. In this study, a mathematical model was developed as a part of efforts to explore the operation of VFR, showing dynamic changes in head differences, ochre depth and Fe(II)/Fe(III) concentration in the effluent flow. The analysis shows that Fe(II) oxidation and ochre formation should be balanced with permeability of ochre bed to maximize VFR operation time and minimize residual Fe(II) in the effluent. The model demonstrates that two compartment VFR can have a longer operation time than a single-compartment VFR and that an optimum compartment ratio exists that maximize VFR operation time. Accelerated Fe(II) oxidation significantly affects the optimum ratio of compartment area and reduced residual Fe(II) in the effluent. VFR operation time can be significantly prolonged by increasing the rate of ochre formation not by accelerated Fe(II) oxidation. Taken together, ochre forms largely in the first compartment while overflowed mine water with reduced iron contents is efficiently filtered in the second compartment. These results provide us a better understanding of VFR operation and optimum design criteria for maximum operation time in a two-compartment VFR. Rapid ochre accretion in the first compartment maintains constant hydraulic

  19. Computation of thermal comfort inside a passenger car compartment

    International Nuclear Information System (INIS)

    Mezrhab, A.; Bouzidi, M.

    2006-01-01

    This paper describes a numerical model to study the behaviour of thermal comfort inside the passenger car compartment according to climatic conditions and materials that compose the vehicle. The specifically developed numerical model is based on the nodal method and the finite difference method. Its specificities are: (i) the transient mode, (ii) the taking into account of the combined convection, conduction and radiation heat transfer, (iii) the coupling of two spectral bands (short-wave and long-wave radiation) and two solar fluxes (beam and diffuse). The compartment is subdivided in several solid nodes (materials constituting the compartment) and fluid nodes (volumes of air inside the compartment). The establishment of the heat balance for each node gives the evolution of its temperature. Effects of solar radiation, types of glazing, car colour and radiative properties of materials constituting the compartment are investigated

  20. Armazenamento de atemoias (Annona squamosa x Annona cherimola recobertas com filme PVC

    Directory of Open Access Journals (Sweden)

    P. A. de Souza

    2015-12-01

    Full Text Available A atemoia, assim como todos os frutos climatéricos, apresenta uma elevada perecibilidade, tornando-se importante a adoção de técnicas pós-colheita. Este trabalho teve como objetivo avaliar o armazenamento de atemoias recobertas com filme PVC. Os frutos utilizados foram da variedade ‘Gefner’ apresentando-se em estado de maturação verde-maduro. Estes foram transferidos para o laboratório de Química de Alimentos do IFCE, submetidos à higienização e divididos nos devidos tratamentos. O primeiro tratamento constou no armazenamento de cinco frutos em bandejas de isopor recobertos com filme PVC. O segundo, do recobrimento individual dos frutos em filme PVC, sendo estes acondicionados em bandejas de isopor e os frutos do controle. Estes foram armazenados durante 8 dias. O delineamento utilizado foi o DIC em esquema fatorial 3x4 com quatro repetições de cinco frutos por parcela. A cada tempo de armazenamento foram avaliadas: perda de massa, sólidos solúveis, acidez titulável, Ratio, pH e índice de rachaduras. O uso de filme plástico reduz a perda de massa, porém retarda o amadurecimento de frutos de atemoia. As rachaduras estão diretamente associadas ao amadurecimento dos frutos, ao aumento dos teores de sólidos solúveis e possivelmente a cultivar avaliada. Storage of atemoyas (Annona squamosa x Annona cherimola covered with PVC filmAbstract: The atemoya, as well as all climacteric fruits, is highly perishable, becoming important to adopt post-harvest techniques. This work aimed to evaluate the atemoyas storage covered with plastic wrap. The fruits used were of the variety 'Gefner' presenting itself in a state of green-mature aging. These were transferred to the Food Chemistry Lab IFCE submitted to cleaning and divided in appropriate treatments. The first treatment consisted in five fruit storage in styrofoam trays covered with plastic wrap. The second, the individual coating of the fruits in PVC film, which are packed in

  1. A human cadaver fascial compartment pressure measurement model.

    Science.gov (United States)

    Messina, Frank C; Cooper, Dylan; Huffman, Gretchen; Bartkus, Edward; Wilbur, Lee

    2013-10-01

    Fresh human cadavers provide an effective model for procedural training. Currently, there are no realistic models to teach fascial compartment pressure measurement. We created a human cadaver fascial compartment pressure measurement model and studied its feasibility with a pre-post design. Three faculty members, following instructions from a common procedure textbook, used a standard handheld intra-compartment pressure monitor (Stryker(®), Kalamazoo, MI) to measure baseline pressures ("unembalmed") in the anterior, lateral, deep posterior, and superficial posterior compartments of the lower legs of a fresh human cadaver. The right femoral artery was then identified by superficial dissection, cannulated distally towards the lower leg, and connected to a standard embalming machine. After a 5-min infusion, the same three faculty members re-measured pressures ("embalmed") of the same compartments on the cannulated right leg. Unembalmed and embalmed readings for each compartment, and baseline readings for each leg, were compared using a two-sided paired t-test. The mean baseline compartment pressures did not differ between the right and left legs. Using the embalming machine, compartment pressure readings increased significantly over baseline for three of four fascial compartments; all in mm Hg (±SD): anterior from 40 (±9) to 143 (±44) (p = 0.08); lateral from 22 (±2.5) to 160 (±4.3) (p measurable fascial compartment pressure measurement model in a fresh human cadaver using a standard embalming machine. Set-up is minimal and the model can be incorporated into teaching curricula. Copyright © 2013 Elsevier Inc. All rights reserved.

  2. Forensic utility of the carbon isotope ratio of PVC tape backings

    Science.gov (United States)

    Stern, L. A.; Thompson, A. H.; Mehltretter, A. H.; McLaskey, V.; Parish, A.; Aranda, R.

    2008-12-01

    Forensic interest in adhesive tapes with PVC-backings (polyvinyl chloride, electrical tapes) derives from their use in construction of improvised explosive devices, drug packaging and in a variety of other illicit activities. Due to the range of physical characteristics and chemical compositions of such tapes, traditional microscopic and chemical analysis of the tape backings and adhesives offer a high degree of discrimination between tapes from different manufacturers and products. To evaluate whether carbon isotope ratios may be able to increase discrimination of electrical tapes, particularly with regards to different tapes of the same product, we assessed the PVC-backings of 87 rolls of black electrical tape for their δ13C values. The adhesive on these tapes was physically removed with hexane, and plasticizers within the PVC tape backings were removed by three-20 minute extractions with chloroform. The δ13C values of the PVC tape backings ranged between -23.8 and -41.5 (‰ V-PDB). The carbon isotopic variation within a product (identical brand and product identification) is significant, based on five products with at least 3 rolls (ranges of 7.4‰ (n=3), 10.0‰ (n=6), 4.2‰ (n=16), 3.8‰ (n=6), and 11.5‰ (n=8), respectively). There was no measurable carbon isotope variation in regards to the following: a) along the length of a roll (4 samples from 1 roll); b) between the center and edge of a strip of tape (1 pair); c) between rolls assumed to be from the same lot of tape (2 pairs); d) between different rolls from the same batch of tape (same product purchased at the same time and place; 5 pairs); and e) between samples of a tape at room temperature, heated to 50° C and 80° C for 1 week. For each sample within the population of 87 tapes, carbon isotopes alone exclude 80 to 100% of the tapes as a potential match, with an average exclusion power of 92.5%, using a window of ± 0.4‰. Carbon isotope variations originate from variations in starting

  3. Trace elements distribution in environmental compartments

    Energy Technology Data Exchange (ETDEWEB)

    Queiroz, Juliana C. de; Peres, Sueli da Silva; Godoy, Maria Luiza D.P., E-mail: suelip@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-11-01

    Trace elements term defines the presence of low concentrations metals at environment. Some of them are considered biologically essential, as Co, Cu and Mn. Others can cause detriment to environment and human health, as Pb, Cd, Hg, As, Ti and U. A large number of them have radioactive isotopes, implying the evaluation of risks for human health should be done considering the precepts of environmental radiological protection. The ecosystem pollution with trace elements generates changes at the geochemistry cycle of these elements and in environmental quality. Soils have single characteristics when compared with another components of biosphere (air, water and biota), cause they introduce themselves not only as a drain towards contaminants, but also as natural buffer that control the transport of chemical elements and other substances for atmosphere, hydrosphere and biota. The main purpose of environmental monitoring program is to evaluate the levels of contaminants in the various compartments of the environment: natural or anthropogenic, and to assess the contribution of a potential contaminant source on the environment. Elemental Composition for the collected samples was determined by inductively coupled plasma mass spectroscopy. The main objective of this work was to evaluate the map baseline of concentration of interest trace elements in environmental samples of water, sediment and soil from Environmental Monitoring Program of Instituto de Radioprotecao e Dosimetria (IRD). The samples were analyzed using an inductively coupled plasma mass spectrometer (ICP-MS) at IRD. >From the knowledge of trace elements concentrations, could be evaluated the environmental quality parameters at the studied ecosystems. The data allowed evaluating some relevant aspects of the study of trace elements in soil and aquatic systems, with emphasis at the distribution, concentration and identification of main anthropic sources of contamination at environment. (author)

  4. Trace elements distribution in environmental compartments

    International Nuclear Information System (INIS)

    Queiroz, Juliana C. de; Peres, Sueli da Silva; Godoy, Maria Luiza D.P.

    2017-01-01

    Trace elements term defines the presence of low concentrations metals at environment. Some of them are considered biologically essential, as Co, Cu and Mn. Others can cause detriment to environment and human health, as Pb, Cd, Hg, As, Ti and U. A large number of them have radioactive isotopes, implying the evaluation of risks for human health should be done considering the precepts of environmental radiological protection. The ecosystem pollution with trace elements generates changes at the geochemistry cycle of these elements and in environmental quality. Soils have single characteristics when compared with another components of biosphere (air, water and biota), cause they introduce themselves not only as a drain towards contaminants, but also as natural buffer that control the transport of chemical elements and other substances for atmosphere, hydrosphere and biota. The main purpose of environmental monitoring program is to evaluate the levels of contaminants in the various compartments of the environment: natural or anthropogenic, and to assess the contribution of a potential contaminant source on the environment. Elemental Composition for the collected samples was determined by inductively coupled plasma mass spectroscopy. The main objective of this work was to evaluate the map baseline of concentration of interest trace elements in environmental samples of water, sediment and soil from Environmental Monitoring Program of Instituto de Radioprotecao e Dosimetria (IRD). The samples were analyzed using an inductively coupled plasma mass spectrometer (ICP-MS) at IRD. >From the knowledge of trace elements concentrations, could be evaluated the environmental quality parameters at the studied ecosystems. The data allowed evaluating some relevant aspects of the study of trace elements in soil and aquatic systems, with emphasis at the distribution, concentration and identification of main anthropic sources of contamination at environment. (author)

  5. Satisfactory reliability among nursing students using the instrument PVC ASSESS to evaluate management of peripheral venous catheters.

    Science.gov (United States)

    Ahlqvist, Margary; Berglund, Britta; Nordström, Gun; Klang, Birgitta; Johansson, Eva

    2014-01-01

    Nursing students should be given opportunities to participate in clinical audits during their education. However, audit tools are seldom tested for reliability among nursing students. The aim of this study was to present reliability among nursing students using the instrument PVC assess to assess management of peripheral venous catheters (PVCs) and PVC-related signs of thrombophlebitis. PVC assess was used to assess 67 inserted PVCs in 60 patients at ten wards at a university hospital. One group of nursing students (n=4) assessed PVCs at the bedside (inter-rater reliability) and photographs of these PVCs were taken. Another group of students (n=3) assessed the PVCs in the photographs after 4 weeks (test-retest reliability). To determine reliability, proportion of agreement [P(A)] and Cohen's kappa coefficient (κ) were calculated. For bedside assessment of PVCs, P(A) ranged from good to excellent (0.80-1.0) in 55% of the 26 PVC assess items that were tested. P(A) was poor (PVC location." In 81% of the items, κ was between moderate and almost perfect: moderate (n=5), substantial (n=3), almost perfect (n=5). For edema at insertion site and two items on PVC dressing, κ was fair (0.21-0.40). Regarding test-retest reliability, P(A) varied between good and excellent (0.81-1) in 85%-95% of the items, and the κ ranged between moderate and almost perfect (0.41-1) in 90%-95%. PVC assess demonstrated satisfactory reliability among nursing students. However, students need training in how to use the instrument before assessing PVCs.

  6. Effect of Sb2O3 Modified by Various Surface Active Agents on Flame Retardant Properties of PVC Composite

    Directory of Open Access Journals (Sweden)

    XU Jian-lin

    2016-08-01

    Full Text Available Sb2O3 powders were prepared by high energy ball milling using polyethyleneglycol-6000,sodium dodecyl sulfate and OP-10 to modify the surface properties of the powder. The influence of Sb2O3 powders modified by various surface active agents on flame retardant properties of PVC composite materials was studied. The phase composition, morphology and the average particle size of the powders were characterized by XRD and TEM. The particle distribution and flame retardant properties of Sb2O3/PVC composite materials were studied by EDS, limiting oxygen index instrument and vertical burning test. The results show that nanometer Sb2O3 has good dispersion in the PVC matrix because of the higher space steric effect of organic film on the surface of nanometer Sb2O3 when polyethyleneglycol-6000 was used as the surface active agent. While the content of nanometer Sb2O3 is 1.26% in the PVC composite material, the oxygen index of the composite material is 27.1% and the composite material reaches fire retardant grade. Using sodium dodecyl sulfate and OP-10 as surface dispersants, the surface of Sb2O3 powders can not be coated completely. The particle size of Sb2O3 powders are 100nm and 150nm, respectively, The Sb2O3 powders have poor dispersion in the PVC matrix, and even some agglomerating phenomena took place. The oxygen index of Sb2O3/PVC composite materials are 24.7% and 25.3%, respectively, containing 1.26% Sb2O3 powders in Sb2O3/PVC composite material. The materials don't achieve flame retardant level.

  7. Processing of nanocomposites EVA/PVC/MMT in twin-screw extruder; Processamento de nanocompositos EVA/PVC/MMT em extrusora dupla rosca

    Energy Technology Data Exchange (ETDEWEB)

    Gehlen, A.; Barbutti Filho, W.R.; Francisquetti, E.L.; Andrade, M.Z.; Zattera, A.J., E-mail: ajzatter@ucs.b [Universidade de Caxias do Sul (UCS), RS (Brazil). Lab. de Polimeros

    2010-07-01

    Polymeric nanocomposites have some superior properties when compared to conventional polymer composites and is one of the most promising fields in the nanotechnology research. In a EVA (ethylene vinyl acetate) /PVC (poly vinyl chloride) matrix was incorporated different types of montmorillonite clays (an inorganic (Na{sup +}) and two organic modified (15A and 30B nanoclays). The mixtures were processed in a co-rotating twin-screw extruder at processing speeds of 200 and 400 rpm. Thermogravimetric analysis (TGA) shown that the inorganic and organic modified clays promoted a shift to higher temperatures in the degradation temperature., X-ray diffraction (XRD) and transmission electronic microscopy (TEM) shows a possible intercalation with the 15A clay, exfoliation with the 30B clay and formation of clusters in the Na{sup +} clay. For all clays studied, the increase in shear rate does not promote significant changes. (author)

  8. Vida útil e metabolismo de carboidratos em raízes de mandioquinha-salsa sob refrigeração e filme de PVC Shelf life and carbohydrate metabolism of arracacha roots stored under refrigeration and PVC film

    Directory of Open Access Journals (Sweden)

    Rosilene Antonio Ribeiro

    2007-04-01

    Full Text Available O objetivo deste trabalho foi avaliar a influência da temperatura de armazenamento e do uso do filme de cloreto de polivinila (PVC sobre a perda de matéria fresca e água, incidência de danos causados por frio e metabolismo pós-colheita dos carboidratos, em raízes tuberosas de mandioquinha-salsa (Arracacia xanthorrhiza. O filme de PVC reduziu a perda de matéria fresca e manteve o teor de água das raízes, durante o armazenamento por 60 dias a 5 e 10ºC. Os danos causados por frio foram inibidos nas raízes embaladas em filme de PCV, em ambas as temperaturas de armazenamento. As baixas temperaturas induziram o acúmulo de açúcares solúveis e a degradação de amido e, para as raízes armazenadas sem PVC, o aumento do conteúdo dos açúcares solúveis foi transiente e a taxa de degradação de amido foi superior à das raízes armazenadas com PVC.The objective of this work was to evaluate the influence of the storage temperature and stretch polyvinylchloride (PVC film on the loss of fresh weight and water, on the development of chilling injury symptoms, and on the postharvest metabolism of carbohydrates, in arracacha tuber roots (Arracacia xanthorrhiza. The PVC film reduced the fresh weight loss and kept water content in the roots during 60-day storage period at 5 and 10ºC. PVC film in both storage temperatures inhibited the development of external and internal chilling injury symptoms. The low temperatures induced the increase of soluble sugar content and decrease of starch concentration, where the increase in soluble sugar was transient in roots stored without PVC film, and the rate of starch degradation was higher compared to the roots stored with PVC.

  9. Stochastic Turing Patterns: Analysis of Compartment-Based Approaches

    KAUST Repository

    Cao, Yang

    2014-11-25

    © 2014, Society for Mathematical Biology. Turing patterns can be observed in reaction-diffusion systems where chemical species have different diffusion constants. In recent years, several studies investigated the effects of noise on Turing patterns and showed that the parameter regimes, for which stochastic Turing patterns are observed, can be larger than the parameter regimes predicted by deterministic models, which are written in terms of partial differential equations (PDEs) for species concentrations. A common stochastic reaction-diffusion approach is written in terms of compartment-based (lattice-based) models, where the domain of interest is divided into artificial compartments and the number of molecules in each compartment is simulated. In this paper, the dependence of stochastic Turing patterns on the compartment size is investigated. It has previously been shown (for relatively simpler systems) that a modeler should not choose compartment sizes which are too small or too large, and that the optimal compartment size depends on the diffusion constant. Taking these results into account, we propose and study a compartment-based model of Turing patterns where each chemical species is described using a different set of compartments. It is shown that the parameter regions where spatial patterns form are different from the regions obtained by classical deterministic PDE-based models, but they are also different from the results obtained for the stochastic reaction-diffusion models which use a single set of compartments for all chemical species. In particular, it is argued that some previously reported results on the effect of noise on Turing patterns in biological systems need to be reinterpreted.

  10. PVC flooring at home and development of asthma among young children in Sweden, a 10-year follow-up.

    Science.gov (United States)

    Shu, H; Jönsson, B A; Larsson, M; Nånberg, E; Bornehag, C-G

    2014-06-01

    The incidence of asthma and allergy has increased throughout the developed world over the past decades. During the same period of time, the use of industrial chemicals such as phthalates, commonly used as plasticizers in polyvinylchloride (PVC) flooring material, has increased. The aim of this study was to investigate whether PVC flooring in the home of children in the age of 1-5 years is associated with the development of asthma in 5- and 10-year follow-up investigations (n = 3228). Dampness in Buildings and Health Study (DBH Study) commenced in 2000 in Värmland, Sweden. The current analyses included subjects who answered all baseline and follow-up questionnaires. Logistic regression analyses were applied to questionnaire results. Children who had PVC floorings in the bedroom at baseline were more likely to develop doctor-diagnosed asthma during the following 10-year period when compared with children living without. There were indications that PVC flooring in the parents' bedrooms was strongly associated with the new cases of doctor-diagnosed asthma when compared with child's bedroom. Our results suggest that PVC flooring exposure during pregnancy could be a critical period in the development of asthma in children at a later time; prenatal exposure and measurements of phthalate metabolites should be included in the future. This study has found that PVC flooring material in early life was related to incidence of asthma during the following 10 years when compared with other flooring materials and especially when comparing with wood flooring type.The study has further indicated that PVC flooring in the parents’ bedroom (proxy for prenatal exposure) was more associated with the development of asthma than PVC in the child’s bedroom was. Our results suggest that PVC flooring exposure during pregnancy could be a critical period in the development of asthma in children at a later time. In future prospective cohort study, prenatal exposure and measurements of

  11. Dynamic Mechanical and Gel Content Properties of Irradiated ENR/PVC blends with TiO2 Nanofillers

    Directory of Open Access Journals (Sweden)

    Nur Azrini Ramlee

    2013-10-01

    Full Text Available Numerous studies reported on irradiated epoxidized natural rubber/polyvinyl chloride (ENR/PVC blends and the blends were found miscible at all compositional range thus it offers a broad of opportunity in modifying the blend characteristic. Addition of low loading titanium dioxide (TiO2 nanofillers in the ENR/PVC blends has shown a remarkable increment in tensile strength. Thus, this study was initiated to address the effect of TiO2 nanofillers on ENR/PVC blends dynamic mechanical and gel content properties and its morphology upon exposure to electron beam irradiation. ENR/PVC blends with addition of 0, 2 and 6 phr TiO2 nanofillers were first blended in a mixing chamber before being irradiated by an electron beam accelerator at different 0-200 kGy irradiation doses. The influence of TiO2 nanofillers on the irradiation crosslinking of ENR/PVC blends was study based on the dynamic mechanical analysis which was carried out in determining the glass transition temperature and the storage modulus behavior of ENR/PVC blends incorporated with TiO2 nanofillers. Formations of irradiation crosslinking in the blend were investigated by gel content measurement. While, the TiO2 nanofillers distribution were examined by Transmission Electron Microscope (TEM. Upon irradiation, the ENR/PVC/6 phr TiO2 formed the highest value of gel fraction. For dynamic mechanical analysis, it was found that electron beam radiation increased the Tg of all the compositions. The relationship between the crosslinking and the stiffness of the nanocomposites also can be found in this study. The enhancement in the storage modulus and Tg at higher amount of TiO2 in the blend could be correlated to the enhancement of the irradiation-induced crosslinking in the nanocomposites characteristic and also with the higher agglomerations of TiO2 evidence shown from  the TEM micrograph examination. Lastly, the dimensions of TiO2 in the blends were found less than 100 nm in diameter which

  12. Flexural Properties of PVC/Bamboo Composites under Static and Dynamic-Thermal Conditions: Effects of Composition and Water Absorption

    Directory of Open Access Journals (Sweden)

    Shahril Anuar Bahari

    2017-01-01

    Full Text Available Polyvinyl chloride (PVC/bamboo composites have been prepared and assessed for their use in interior and exterior load-bearing applications. PVC composites were formed by compounding PVC with different bamboo particle sizes and loadings. The mechanical properties of these composites were determined at both ambient and elevated temperatures and after long-term water soaking. Analysis revealed that bamboo incorporation improved the PVC composite flexural modulus which was also observed with dynamic mechanical-thermal analysis on heating composites to ca. 70°C. Addition of 25% and 50% bamboo particles increases flexural modulus by 80% with dependency on whether fine (<75 μm or coarse (<1 mm particles were used. On water soaking to saturation, composites had water weight uptakes of 10%, with reduced flexural properties obtained for all water-soaked composites. Nonetheless, the results of this study show that PVC/bamboo composites achieve the minimum flexural performance of ASTM D 6662, indicating potential for their use in exterior applications.

  13. Development and characterization of a synthetic PVC/DEHP myocardial tissue analogue material for CT imaging applications.

    Science.gov (United States)

    Ramadan, Sherif; Paul, Narinder; Naguib, Hani E

    2018-04-01

    A simple myocardial analogue material has great potential to help researchers in the creation of medical CT Imaging phantoms. This work aims to outline a Bis(2-ethylhexyl) phthalate (DEHP) plasticizer/PVC material to achieve this. DEHP-PVC was manufactured in three ratios, 75, 80, and 85% DEHP by heating at 110 °C for 10 min to promote DEHP-PVC binding followed by heating at 150 °C to melt the blend. The material was then tested utilizing FTIR, tensile testing, dynamic mechanical analysis and imaged with computed tomography. The FTIR testing finds the presence of C-CL and carbonyl bonds that demonstrate the binding required in this plasticized material. The tensile testing finds a modulus of 180-20 kPa that increases with the proportion of plasticizer. The dynamic mechanical analysis finds a linear increase in viscoelastic properties with a storage/loss modulus of 6/.5-120/18 kPa. Finally, the CT number of the material increases with higher PVC content from 55 to 144HU. The 80% DEHP-PVC ratio meets the mechanical and CT properties necessary to function as a myocardial tissue analogue.

  14. Identification of constraints influencing the bacterial genomes evolution in the PVC super-phylum.

    Science.gov (United States)

    Pinos, Sandrine; Pontarotti, Pierre; Raoult, Didier; Merhej, Vicky

    2017-03-09

    Horizontal transfer plays an important role in the evolution of bacterial genomes, yet it obeys several constraints, including the ecological opportunity to meet other organisms, the presence of transfer systems, and the fitness of the transferred genes. Bacteria from the Planctomyctetes, Verrumicrobia, Chlamydiae (PVC) super-phylum have a compartmentalized cell plan delimited by an intracytoplasmic membrane that might constitute an additional constraint with particular impact on bacterial evolution. In this investigation, we studied the evolution of 33 genomes from PVC species and focused on the rate and the nature of horizontally transferred sequences in relation to their habitat and their cell plan. Using a comparative phylogenomic approach, we showed that habitat influences the evolution of the bacterial genome's content and the flux of horizontal transfer of DNA (HT). Thus bacteria from soil, from insects and ubiquitous bacteria presented the highest average of horizontal transfer compared to bacteria living in water, extracellular bacteria in vertebrates, bacteria from amoeba and intracellular bacteria in vertebrates (with a mean of 379 versus 110 events per species, respectively and 7.6% of each genomes due to HT against 4.8%). The partners of these transfers were mainly bacterial organisms (94.9%); they allowed us to differentiate environmental bacteria, which exchanged more with Proteobacteria, and bacteria from vertebrates, which exchanged more with Firmicutes. The functional analysis of the horizontal transfers revealed a convergent evolution, with an over-representation of genes encoding for membrane biogenesis and lipid metabolism, among compartmentalized bacteria in the different habitats. The presence of an intracytoplasmic membrane in PVC species seems to affect the genome's evolution through the selection of transferred DNA, according to their encoded functions.

  15. The relationship between the S-wave in lead 1 and recurrence of RVOT PVC ablation.

    Science.gov (United States)

    Güneş, Hacı Murat; Demir, Gültekin Günhan; Karaca, Oğuz; Yılmaz, Filiz Kızılırmak; İbişoğlu, Ersin; Gökdeniz, Tayyar; Omaygenç, Mehmet Onur; Güler, Ekrem; Güler, Gamze Babur; Savur, Ümeyir; Çakal, Beytullah; Barutçu, İrfan; Kılıçaslan, Fethi

    2017-12-14

    Radiofrequency catheter ablation (CA) is a common non-pharmacological treatment option for ventricular premature contractions (PVCs) originating from right ventricular outflow tract (RVOT). In this study, we aimed to investigate the relationship between recurrence after CA for RVOT-PVC and S-wave in lead 1 that was shown to be associated with RVOT depolarization. A total of 104 patients who were referred to our clinic for CA for idiopathic RVOT-PVC between 2012 and 2015years were enrolled. All ECG parameters were measured before and after the ablation procedure. Ablation was successful in 100 patients (96,1%). These patients with successful ablation were followed for a mean duration of 1078days. 13 patients (13%) had recurrence. Univariate logistic regression analysis revealed age (odds ratio: 1.916, p:0,012), presence of post-procedural S1 (odds ratio:1.040 p:0,028), post-procedural S1 area (oddsratio:1.023 p:0,041), ΔS1 area (odds ratio:1.242 p:0,004) as predictors for recurrence. Multivariate logistic regression analysis detected age (odds ratio:1.053 p:0,032) and ΔS1 area (odds ratio:0.701 p:0,009) as predictors for recurrence. Radiofrequency CA for RVOT-PVC can be performed with high procedural success and low complication rates. Age and ΔS1 area might be helpful for prediction of recurrence after CA. Copyright © 2017. Published by Elsevier Inc.

  16. Treatment of invasive fungal infections: stability of voriconazole infusion solutions in PVC bags

    Directory of Open Access Journals (Sweden)

    Andréa I.H. Adams

    Full Text Available Voriconazole is a novel broad-spectrum antifungal drug, employed in the treatment of invasive fungal infections, and represents an alternative to amphotericin B treatment. The manufacturer recommends that any unused reconstituted product should be stored at 2ºC to 8ºC, for no more than 24 h, but no recommendations about i.v. infusion solutions are given. Previous works have reported on the stability of voriconazole in polyolefin bags and just one in 5% dextrose polyvinyl chloride (PVC bags, at a 4 mg.mL-1 concentration. In this work, the stability of voriconazole as an i.v. infusion solution in 0.9% sodium chloride and in 5% dextrose, in PVC bags, at 0.5 mg.mL-1, stored at 4 ºC and at room temperature, protected from light, was evaluated. These infusion solutions were analyzed for a 21-day period. Chemical stability was evaluated by HPLC assay. Visual inspection was performed and pH of the solutions was measured. No color change or precipitation in the solutions was observed. The drug content remained above 90% for 11 days in 0.9% sodium chloride and for 9 days in 5% dextrose solutions. The i.v. infusion solutions stored at room temperature were not stable. At room temperature, the voriconazole content dropped down to 88.3 and 86.6%, in 0.9% sodium chloride or 5% dextrose solutions, respectively, two days after admixture. Assays performed at the end of the study suggest the sorption of voriconazole by the PVC bags. The results of this study allow cost-effective batch production in the hospital pharmacy.

  17. Understanding Hydrothermal Dechlorination of PVC by Focusing on the Operating Conditions and Hydrochar Characteristics

    Directory of Open Access Journals (Sweden)

    Tian Li

    2017-03-01

    Full Text Available To remove chlorine from chlorinated wastes efficiently, the hydrothermal treatment (HT of PVC was investigated with a lower alkaline dosage in this work. Some typical operating conditions were investigated to find out the most important factor affecting the dechlorination efficiency (DE. The FTIR technique was employed to detect the functional groups in PVC and hydrochars generated to reveal the possible pathways for chlorine removal. The results show that the HT temperature was a key parameter to control the dechlorination reaction rate. At a HT temperature of 240 °C, about 94.3% of chlorine could be removed from the PVC with 1% NaOH. The usage of NaOH was helpful for chlorine removal, while a higher dosage might also hinder this process because of the surface poisoning and coverage of free sites. To some extent, the DE was increased with the residence time. At a residence time of 30 min, the DE reached a maximum of 76.74%. A longer residence time could promote the generation of pores in hydrochar which is responsible for the reduction in DE because of the re-absorption of water-soluble chlorine. According to the FTIR results, the peak intensities of both C=CH and C=C stretching vibrations in hydrochar were increased, while the peak at around 3300 cm−1 representing the –OH group was not obvious, indicating that the dehydrochlorination (elimination reaction was a main route for chlorine removal under these conditions studied in this work.

  18. Determination of bisphenol A in, and its migration from, PVC stretch film used for food packaging.

    Science.gov (United States)

    López-Cervantes, J; Paseiro-Losada, P

    2003-06-01

    Bisphenol A (BPA) is used as an additive in polyvinyl chloride (PVC) products, including stretch films used for food packaging. The BPA contents were investigated of several brands of stretch film bought locally but marketed internationally or throughout Spain and which were presumably produced at different manufacturing plants. Their major components were identified by FTIR (Fourier Transform Infrared Spectrometry) and horizontal attenuated total reflectance, and the migration of BPA from these materials into the standard European Union food simulants was determined by high-performance liquid chromatography (HPLC) using both fluorescence (FL) and ultraviolet (UV) detection, the identity of the analyte being confirmed by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS). The two HPLC detection methods had different detection limits (30 microg x l(-1) for UV, 3 microg x l(-1) for FL), but afforded virtually identical BPA determinations for the samples tested. BPA contents ranging from 40 to 100 mg x kg(-1) were found in three of the five PVC-based films analysed, and a content of 500 mg x kg(-1) was found in a fourth; for these determinations, extraction into acetonitrile was used. In standard tests of migration into water, 3% acetic acid and olive oil over 10 days at 40 degrees C, migration from a given film was in all cases greatest into olive oil. Migration from the films with non-zero BPA contents ranged from 3 to 31 microg x dm(-2), values higher than those reported for many other food-contact materials, but lower than the European Union specific migration limit for BPA. PVC stretch film nevertheless may make a significant contribution to contamination of foodstuffs by BPA, and should be taken into account in estimating BPA intake or exposure to this substance.

  19. Abdominal compartment syndrome successfully treated with neuromuscular blockade

    Directory of Open Access Journals (Sweden)

    Kris T Chiles

    2011-01-01

    Full Text Available A 48 year old male admitted to the intensive care unit after a cardiac arrest complicated by a stroke intra-operatively during automatic implantable cardioverter defibrillator placement. He post-operatively developed a rigid abdomen, elevated peak and plateau pressures, hypoxia and renal insufficiency. He was diagnosed with abdominal compartment syndrome with an intra-abdominal compartment pressure of 40mmHg. The patient was administered 10 mg of intravenous cisatracuriumbesylate in preparation for bedside surgical abdominal decompression. Cisatracurium eliminated the patients need for surgical intervention by reducing his abdominal compartment pressures to normal and improving his hypoxia and renal function. This case illustrates that neuromuscular blockade should be attempted in patients with abdominal compartment syndrome prior to surgical intervention.

  20. Environmental fate and transport analysis with compartment modeling

    National Research Council Canada - National Science Library

    Little, Keith W

    2012-01-01

    .... Discussing various modeling issues in a single volume, this text provides an introduction to a specific numerical modeling technique called the compartment approach and offers a practical user's guide to the GEM...

  1. Treatment of PVC using an alternative low energy ion bombardment procedure

    Science.gov (United States)

    Rangel, Elidiane C.; dos Santos, Nazir M.; Bortoleto, José Roberto R.; Durrant, Steven F.; Schreiner, Wido H.; Honda, Roberto Y.; Rangel, Rita de Cássia C.; Cruz, Nilson C.

    2011-12-01

    In many applications, polymers have progressively substituted traditional materials such as ceramics, glasses, and metals. Nevertheless, the use of polymeric materials is still limited by their surface properties. Frequently, selective modifications are necessary to suit the surface to a given application. Amongst the most common treatments, plasma immersion ion implantation (PIII) has attracted the attention of many researchers owing to its versatility and practicality. This method, however, requires a power supply to provide high voltage (tens of kV) negative pulses, with a controlled duty cycle, width and frequency. Owing to this, the implementation of PIII on the industrial scale can become economically inviable. In this work, an alternative plasma treatment that enables low energy ion bombardment without the need of a high voltage pulse generator is presented. To evaluate the efficiency of the treatment of polymers, polyvinylchloride, PVC, specimens were exposed to 5 Pa argon plasmas for 3600 s, at excitation powers, P, of between 10 and 125 W. Through contact angle and atomic force microscopy data, the influence of P on the wettability, surface free energy and roughness of the samples was studied. Surface chemical composition was measured by X-ray photoelectron spectroscopy, XPS. To evaluate the effect of aging under atmospheric conditions, contact angle and XPS measurements were performed one and 1334 days after the treatment. The plasma potential and ion density around the driven electrode were determined from Langmuir probe measurements while the self-bias potential was derived with the aid of an oscilloscope. From these data it was possible to estimate the mean energy of ions bombarding the PVC surface. Chlorine, carbon and oxygen contamination were detected on the surface of the as-received PVC. Upon exposure to the plasma, the proportion of chlorine was observed to decrease while that of oxygen increased. Consequently, the wettability and surface energy

  2. Complex radiation degradation behavior of PVC materials under accelerated aging conditions

    International Nuclear Information System (INIS)

    Clough, R.L.; Gillen, K.T.

    1983-07-01

    The radiation degradation behavior of three commercial polyvinyl chloride (PVC) materials has been investigated. All three exhibit an interesting reversal in the trend of the tensile strength part way through the aging experiment: the tensile strength first drops, then rises. The early drop is associated with oxidative scission; the rise is associated with crosslinking and is preceded by the material reaching the gel point. It was also found that the tensile elongation tended to level out in advanced stages of aging with the leveling-out values dependent on the dose rate. These phenomena pose complications for the design of accelerated aging tests

  3. Perda de carga em reduções concêntricas de PVC

    OpenAIRE

    Oliveira, Francienne Gois [UNESP; Resende, Paulo Rogério Nascimento; Barreto, Antonio Carlos; Seraphim, Odivaldo José [UNESP

    2011-01-01

    In the pumping pipelines the located load losses are very important since they have direct influence on hydraulic design of an irrigation system, especially regarding the concentric reducers used in the distribution lines. Hence this work was conducted in the Laboratório de Hidráulica do Centro Federal de Educação Tecnológica de Uberaba. We analyzed 03 concentric reducers PVC 75 x 50 mm, 50 mm and 35 x 35 x 1 "operating at different flow rates. The performance of the tests with the variation ...

  4. Preparation of a new gamma irradiated PVC-Olive oil cake plastic composite material

    International Nuclear Information System (INIS)

    Messaud, F.A.; Almsmary, Y.A.; Elwerfalli, S.M.; Benayad, S.M.; Haraga, S.O.; Benfaid, N.A.; Kabar, Y.M.

    2003-01-01

    This paper dealt with the investigation on preparing new plastic composite material, utilizing polyvinyl chloride polymer (a commercial product in abu-kammash chemical complex) and olive oil cake (a waste of many olive oil production factories), followed by gamma irradiation (26.3 Kg ry) o induce crosslinking of the polymer. The new material possess good, electrical and mechanical properties as compared to plastic products of (PVC plastic pipe factory), and which could be used as new construction anti corrosive material, such as special roofing and partitioning or household goods

  5. Study of PVC membrane grafted by Acrylic Acid, Acrylonitrile and Acrylamide using preirradiation method

    International Nuclear Information System (INIS)

    Kattan, M.; Al-Kasseri, H.

    2015-03-01

    Grafting of acrylic acid, acrylamide and acrylonitrile onto poly vinyl chloride (PVC) films using gamma radiation has been carried out by both type direct and preirradiation methods. The effect of different parameter such as monomer concentration, inhibitor concentration, reaction temperature, reaction time and irradiation dose on the grafting yield were investigated. It was found that the grafting yield depends on these parameters. The grafting yield was strongly monomer dependent and grafting method: the highest was found for AAc by the preirradiation method. The samples were characterized by tensile strength measurement, swilling and ion uptake. The highest increase in swilling was observed on samples grafted with AAc by the preirradiation method.(author)

  6. SELECTED PHYSICAL PROPERTIES OF EXTRUDED COMPOSITES TYPE OF POROUS PVC-METAL

    Directory of Open Access Journals (Sweden)

    Aneta Tor-Świątek

    2014-09-01

    Full Text Available The article presents studies of selected physical and mechanical properties of hybrid materials type of polymer-metal. In the frame of this work modification of PVC with the iron and copper powder in amount of 0, 1.5 and 3% and blowing agent in amount of 0, 0.5, 1% was done. Extrudates in a form of pipe were tested to determine density, porosity, maximum tensile stress, stress at break, modulus of elasticity and elongation with break. The samples were also observed in a microscope. The studies have shown significant influence of the added components on the properties tested.

  7. A numerical investigation into the behaviour of cracks in uPVC pipes under pressure

    OpenAIRE

    2012-01-01

    D.Ing. This study is a numerical investigation into the behaviour of cracks in uPVC pipes under pressure. This study is a continuation of a Masters dissertation which showed that leakage exponents vary significantly from the theoretical orifice exponent of 0.5 for cracks in pipes for different materials. This study looks at the behaviour of cracks in more detail and specifically with regard to the parameters of the pipe and crack. Using Finite Element Analysis the relationship between the ...

  8. Armazenamento de frutos de quiabo embalados com filme de PVC em condição ambiente Shelf life of four cultivars of okra covered with PVC film at room temperature

    Directory of Open Access Journals (Sweden)

    Wagner F da Mota

    2006-06-01

    Full Text Available O presente trabalho objetivou avaliar a influência do filme de PVC durante o armazenamento, em condição ambiente, de frutos de quatro cultivares de quiabo para consumo in natura. O experimento foi organizado segundo delineamento experimental em blocos casualizados, em esquema de parcelas subdivididas, tendo nas parcelas um fatorial 2x4, ou seja, embalagens sem e com PVC e quatro cultivares (Amarelinho, Red Velvet, Star of David, Mammoth Spinless, e nas subparcelas os seis períodos de amostragem com quatro blocos. As características avaliadas foram: massa fresca, teor relativo de água, teor de vitamina C, teor de clorofila total e análise visual do escurecimento. O uso do PVC proporcionou menor perda de massa fresca e maior teor relativo de água ao longo do armazenamento para todas as cultivares estudadas em relação às não embaladas com o filme. As menores perdas de massa fresca foram verificadas nas cvs. Amarelinho e Star of David sem e com PVC, respectivamente. Os frutos das cvs. Red Velvet e Star of David, embalados com PVC, apresentaram menores perdas no teor de vitamina C. Foi observado que a cv. Mammoth Spinless manteve maior teor de clorofila. Observou-se, de maneira geral, maior incidência de escurecimento nos frutos armazenados sem PVC. Verificou-se que de toda as cultivares estudadas o que manifestou melhor conservação com relação ao escurecimento foi o Red Velvet.The present work evaluated the influence of PVC film on the postharvest shelf life of four cultivars of okra stored at room temperature. The experiment was arranged in random blocks, in sub split parcels, where the parcels were a factorial 2x4, with and without PVC film and the cvs. Amarelinho, Red Velvet, Star of David and Mammoth Spinless, and the subparcels the six sample time with four blocks. The characteristics evaluated were: percentage of weight loss, relative water content, total chlorophyll and chlorophyll a and b, content of vitamin C, visual

  9. Aging and characterization of PVC compound used as flat-panel of a low cost solar collector; Envelhecimento e caracterizacao de compostos de PVC usado em placas de coletores solares de baixo custo

    Energy Technology Data Exchange (ETDEWEB)

    Prado, Bruna R.; Pinto, Tatiana T.; Bartoli, Julio R. [Depto. de Tecnologia de Polimeros, Faculdade de Engenharia Quimica/Universidade Estadual de Campinas. FEQ/UNICAMP, SP (Brazil)], e-mail: bartoli@feq.unicamp.br; Fernandes, Elizabeth G. [Tezca P and D Celulas Solares (Brazil)

    2011-07-01

    Regardless the excellent amount of solar irradiation in Brazil, the development and production of solar water heating systems did not reach the low-income families yet. The relatively high cost of conventional solar water heaters is still the main reason to prevent it. The development of a low cost solar water heater (around US$ 200), easy technology, was the scope of previous work. All-plastic solar collector prototypes were developed using unplasticized Poly (vinyl chloride) ceiling panels and tubes, commodities from building engineering. Nevertheless, the main thermal and photo degradation mechanisms for PVC are well known; the unusual application of PVC as solar collector materials should need a specific investigation on environmental aging. This work presents a study on outdoor aging and characterization of PVC flat-plate absorber of solar collectors after 5 years on use. (author)

  10. Measuring Compartment Size and Gas Solubility in Marine Mammals

    Science.gov (United States)

    2015-09-30

    Koopman, H.N. and A.J. Westgate, Solubility of nitrogen in marine mammal blubber depends on its lipid composition. Journal of Experimental Biology...1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Measuring Compartment Size and Gas Solubility in Marine...is to develop methods to estimate marine mamal tissue compartment sizes, and tissue gas solubility . We aim to improve the data available for the

  11. Compartment syndrome after intramedullary nailing of the tibia.

    Science.gov (United States)

    Tischenko, G J; Goodman, S B

    1990-01-01

    Three patients had compartment syndrome of the leg after tibial intramedullary nailing with reaming. They were all treated successfully with emergency fasciotomy. A prospective study was done of seven additional patients who had continual monitoring of the pressure in the deep posterior compartment during tibial intramedullary nailing with reaming. In five of them, the procedure was performed three weeks or less after injury and in the remaining two, the nailing was performed later for the treatment of non-union. Two pressure peaks in the deep posterior compartment were noted: one after strong longitudinal traction was applied and the fracture was reduced and the other during intramedullary reaming. Intraoperative pressure of thirty millimeters of mercury or more were recorded in three of the seven patients. In the treatment of tibial fractures, operative procedures that involve forceful traction for a long time may predispose the patient to compartment syndrome in the leg. Close clinical observation of such patients is needed. When there is a high risk of compartment syndrome, monitoring of the pressure in the compartment may be prudent.

  12. Rheological Studies of PMMA–PVC Based Polymer Blend Electrolytes with LiTFSI as Doping Salt

    Science.gov (United States)

    Liew, Chiam–Wen; Durairaj, R.; Ramesh, S.

    2014-01-01

    In this research, two systems are studied. In the first system, the ratio of poly (methyl methacrylate) (PMMA) and poly (vinyl chloride) (PVC) is varied, whereas in the second system, the composition of PMMA–PVC polymer blends is varied with dopant salt, lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) with a fixed ratio of 70 wt% of PMMA to 30 wt% of PVC. Oscillation tests such as amplitude sweep and frequency sweep are discussed in order to study the viscoelastic properties of samples. Elastic properties are much higher than viscous properties within the range in the amplitude sweep and oscillatory shear sweep studies. The crossover of and is absent. Linear viscoelastic (LVE) range was further determined in order to perform the frequency sweep. However, the absence of viscous behavior in the frequency sweep indicates the solid-like characteristic within the frequency regime. The viscosity of all samples is found to decrease as shear rate increases. PMID:25051241

  13. Improvement in mechanical properties of glass fiber fabric/PVC composites with chopped glass fibers and coupling agent

    Science.gov (United States)

    Lee, Jaewoong; Park, Su Bin; Lee, Joon Seok; Kim, Jong Won

    2017-07-01

    Glass fiber reinforced polyvinylchloride (PVC) composite is used widely because of its low price, chemical resistance, and dimensional stability, but most are short fiber reinforced PVC composites. Fabric reinforced composite have undulated regions, which is the only region without fiber, due to the characteristics of the weave construction, and it limits increasing the mechanical properties. Therefore, in this study, to increase the mechanical properties, the undulated regions of the glass fiber fabric/PVC composite were filled with a silane coupling agent treated chopped fiber. The physical properties, dynamic mechanical thermal properties, and mechanical properties of the prepared composite were observed. The critical fiber aspect ratio of the chopped fiber is different for each mechanical property. This shows that the fabric-reinforced composite of chopped fibers affect each of the mechanical properties differently. In addition, the silane coupling treatment increases the compatibility of the composite components, improving the mechanical properties.

  14. Electrical and spectroscopic characterization of polyaniline-polyvinyl chloride (PANI-PVC) blends doped with sodium thiosulphate

    International Nuclear Information System (INIS)

    Ameen, Sadia; Ali, Vazid; Zulfequar, M.; Mazharul Haq, M.; Husain, M.

    2008-01-01

    Polyaniline is doped with sodium thiosulphate in aqueous tetrahydrofuran (THF) and the blended films have been prepared by changing the amount of doped polyaniline (PANI) in the fixed amount of polyvinyl chloride (PVC). The electrical conductivity of various samples of polyaniline-polyvinyl chloride (PANI-PVC) blends has been studied to see the effect of dopant in the temperature range 300-400 K. Mott's parameters are used to explain the conduction mechanism. Different parameters such as pre-exponential factor (σ 0 ), activation energy (ΔE) and T 0 have also been calculated to see the effect of chemical doping. The crystallinity of the blends is explained on the basis of T 0 . The calculated values of T 0 show that crystallinity increases with an increase of doped PANI in PANI-PVC blends. Fourier transform-infrared (FTIR) spectroscopy is done to explore the nature and interaction of dopant into the polymeric chain

  15. The role of each compartment in a two-compartment vertical flow reactor for ferruginous mine water treatment.

    Science.gov (United States)

    Yim, G J; Cheong, Y W; Hong, J H; Hur, W

    2014-10-01

    A vertical flow reactor (VFR) has been suggested for remediation of ferruginous mine drainage that passes down through an accreting bed of ochre. However, a VFR has a limited operation time until the system begins to overflow. In this study, a mathematical model was developed as a part of the effort to explore the operation of a VFR, showing dynamic changes in the head differences, ochre depths, and Fe(II)/Fe(III) concentrations in the effluent flow. The analysis showed that VFR operation time extended from 148.5 days to 163 days in an equally divided and to 168.4 days in asymmetrically (0.72:0.28) divided two-compartment VFR, suggesting that an optimum compartment ratio exists that maximizes the VFR operation time. A constant head filtration in the first compartment maximized filtration efficiency and thus prolonged VFR longevity in the two-compartment VFR. Fe(II) oxidation and ochre formation should be balanced with the permeability of the ochre bed to maximize the VFR operation time and minimize the residual Fe(II) in the effluent. Accelerated Fe(II) oxidation affected the optimum ratio of the compartment area and reduced the residual Fe(II) in the effluent. The VFR operation time can be prolonged significantly from 764 days to 3620 days by increasing the rate of ochre formation, much more than by accelerating the Fe(II) oxidation. During the prolonged VFR operation, ochre formed largely in the first compartment, while overflowing mine water with reduced iron content was effectively filtered in the second compartment. These results not only provide a better understanding of VFR operation but also suggest the direction of evolution of two-compartment VFR toward a compact and highly efficient facility integrated with an aerated cascade and with automatic coagulant feeding. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. THERMOACOUSTIC REFRIGERATOR SYSTEM PERFORMANCE USING THE PVC (POLYVINYL CHLORIDE STACK BY POWER INPUT VARIATION

    Directory of Open Access Journals (Sweden)

    Indah Kharismawati

    2017-04-01

    Full Text Available The thermoacoustic refrigerator is an innovative alternative and did not use substances that had a negative impact on the environment such as freon, but using air as the working substance. The materials used the refrigerator were easily obtained and the construction components were simple so that made this refrigerator was cheap, easy to make and easy to maintain. Stack was used in the thermoacoustic refrigerator system used PVC (Polyvinyl chloride which is parallel cylindrical shape and diameter (1.50 ± 0.05 mm and length of 8 cm. Variations of loudspeaker input power that used were 20 watt, 30 watt, 40 watt, 50 watt and 60 watt. Variations of the input power that used to determine the effect of loudspeaker input power to decreasing temperature in the operating of the thermoacoustic refrigerator system using  PVC stack. From the result, loudspeaker input power influenced on the decreasing temperature that was 6.0 °C for 20 watts, 6.7 °C for 30 watts, 7.2 °C for 40 watts, 8.0 °C for 50 watts and 9.0 °C for 60 watts. From these results indicated optimum decreasing temperature depended on the amount of loudspeaker power that was directly proportional to the decreasing temperature obtained.

  17. Recovery of copper from PVC multiwire cable waste by steam gasification.

    Science.gov (United States)

    Zabłocka-Malicka, Monika; Rutkowski, Piotr; Szczepaniak, Włodzimierz

    2015-12-01

    Screened multiwire, PVC insulated tinned copper cable was gasified with steam at high temperature (HTSG) under atmospheric pressure for recovery of cooper. Gases from the process were additionally equilibrated at 850°C on the bed of calcined clay granules and more than 98% of C+H content in the cable was transformed to non-condensing species. Granules prepared from local clay were generally resistant for chlorination, there was also almost no deposition of metals, Cu and Sn, on the catalytic bed. It was found that 28% of chlorine reacted to form CaCl2, 71% was retained in aqueous condensate and only 0.6% was absorbed in alkaline scrubber. More than 99% of calcium existed in the process solid residue as a mixture of calcium chloride and calcium oxide/hydroxide. PVC and other hydrocarbon constituents were completely removed from the cable sample. Copper was preserved in original form and volatilization of copper species appeared insignificant. Tin was alloying with copper and its volatilization was less than 1%. Fractionation and speciation of metals, chlorine and calcium were discussed on the basis of equilibrium model calculated with HSC Chemistry software. High temperature steam gasification prevents direct use of the air and steam/water is in the process simultaneously gaseous carrier and reagent, which may be recycled together with hydrocarbon condensates. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Effects of Sulfate, Chloride, and Bicarbonate on Iron Stability in a PVC-U Drinking Pipe.

    Science.gov (United States)

    Wang, Jiaying; Tao, Tao; Yan, Hexiang

    2017-06-19

    In order to describe iron stability in plastic pipes and to ensure the drinking water security, the influence factors and rules for iron adsorption and release were studied, dependent on the Unplasticized poly (vinyl chloride) (PVC-U) drinking pipes employed in this research. In this paper, sulfate, chloride, and bicarbonate, as well as synthesized models, were chosen to investigate the iron stability on the inner wall of PVC-U drinking pipes. The existence of the three kinds of anions could significantly affect the process of iron adsorption, and a positive association was found between the level of anion concentration and the adsorption rate. However, the scaling formed on the inner surface of the pipes would be released into the water under certain conditions. The Larson Index (LI), used for a synthetic consideration of anion effects on iron stability, was selected to investigate the iron release under multi-factor conditions. Moreover, a well fitted linear model was established to gain a better understanding of iron release under multi-factor conditions. The simulation results demonstrated that the linear model was better fitted than the LI model for the prediction of iron release.

  19. An oxalate selective electrode based on modified PVC-membrane with tetra-butylammonium--Clinoptilolite nanoparticles.

    Science.gov (United States)

    Hoseini, Zohre; Nezamzadeh-Ejhieh, Alireza

    2016-03-01

    A modified PVC-membrane electrode with tetra-butylammonium bromide - Clinoptilolite nano-particles (TBA-NCP) showed good Nernstian slope (29.9±0.6 mV per decade of oxalate concentration) in concentration range of 3.1×10(-7)-8.3×10(-1) mol L(-1) with a detection limit of 1.5×10(-7) mol L(-1). The best performance was obtained with a membrane composition of 31.5% PVC, 62.5% DOP and 6% TBA-NCP in the temperature range of 20-35 °C and the pH range of 4-9. The fast response time and good reproducibility over a period of 3 months are other characteristics of the sensor. The proposed electrode was successfully used as an indicator electrode in titration of oxalate ions with CaCl2 solution. The proposed electrode was also used in direct potentiometric determination of oxalate in many real samples such as: mushroom, black and green tea, spinach and beet. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Application of water flowing PVC pipe and EPS foam bead as insulation for wall panel

    Science.gov (United States)

    Ali, Umi Nadiah; Nor, Norazman Mohamad; Yusuf, Mohammed Alias; Othman, Maidiana; Yahya, Muhamad Azani

    2018-02-01

    Malaysia located in tropical climate which have a typical temperature range between 21 °C to 36 °C. Due to this, air-conditioning system for buildings become a necessity to provide comfort to occupants. In order to reduce the energy consumption of the air-conditioning system, the transmission of heat from outdoor to indoor space should be kept as minimum as possible. This article discuss about a technology to resist heat transfer through concrete wall panel using a hybrid method. In this research, PVC pipe was embedded at the center of concrete wall panel while the EPS foam beads were added about 1% of the cement content in the concrete mix forming the outer layer of the wall panel. Water is regulated in the PVC pipe from the rainwater harvesting system. The aim of this study is to minimize heat transfer from the external environment into the building. Internal building temperature which indicated in BS EN ISO 7730 or ASHRAE Standard 55 where the comfort indoor thermal is below 25°C during the daytime. Study observed that the internal surface temperature of heat resistance wall panel is up to 3°C lower than control wall panel. Therefore, we can conclude that application of heat resistance wall panel can lead to lower interior building temperature.

  1. Organophosphorus pesticide exposure in agriculture: effects of temperature, ultraviolet light and abrasion on PVC gloves

    Science.gov (United States)

    ISMAIL, Ismaniza; GASKIN, Sharyn; PISANIELLO, Dino; EDWARDS, John W.

    2017-01-01

    Elbow length PVC gloves are often recommended for protection against organophosphorus pesticide (OP) exposure in agriculture. However, performance may be reduced due to high temperature, UV exposure and abrasion. We sought to assess these impacts for two OPs under normal use and reasonable worst-case scenarios. Glove permeation tests were conducted using ASTM cells with two PVC glove brands at 23°C and 45°C for up to 8 h. Technical grade dichlorvos and formulated diazinon were used undiluted and at application strength. Breakthough of undiluted dichlorvos occurred at both 23°C and 45°C, but only at 45°C for application strength. Breakthrough of diazinon was not achieved, except when undiluted at 45°C. UV-exposed and abraded gloves showed reduced performance, with the effect being approximately two-fold for dichlorvos. Only small differences were noted between glove brands. Extra precautions should be taken when handling concentrated OPs at high temperature, or when using abraded or sunlight-exposed gloves. PMID:29199264

  2. On the Surface Free Energy of PVC/EVA Polymer Blends: Comparison of Different Calculation Methods.

    Science.gov (United States)

    Michalski; Hardy; Saramago

    1998-12-01

    The surface free energy of polymeric films of polyvinylchloride (PVC) + poly(ethylene-co-vinylacetate) (EVA) blends was calculated using the van Oss treatment (Lifshitz and electron donor-electron acceptor components of surface free energy) and the Owens-Wendt treatment (dispersive and nondispersive components of surface free energy). Surface free energy results were found to be greatly dependent on the calculation method and on the number of standard liquids used for contact angle measurements. The nondispersive/donor-acceptor surface free energy component and the total surface free energy of polymeric films were always higher when the van Oss treatment was used compared to the Owens-Wendt treatment. Conversely, both methods led to similar apolar/Lifshitz components. All the calculation methods were in good agreement for the surface free energy of PVC; however, a discrepancy between the methods arose as EVA content in the blends increased. It seems that there is not yet a definite solution for the calculation of solid surface free energy. Further developments of existing models are needed in order to gain consistency when calculating this important physicochemical quantity. Copyright 1998 Academic Press.

  3. Equilibrium Relationship between SVOCs in PVC Products and the Air in Contact with the Product.

    Science.gov (United States)

    Eichler, Clara M A; Wu, Yaoxing; Cao, Jianping; Shi, Shanshan; Little, John C

    2018-03-06

    Phthalates and phthalate alternatives are semivolatile organic compounds (SVOCs) present in many PVC products as plasticizers to enhance product performance. Knowledge of the mass-transfer parameters, including the equilibrium concentration in the air in contact with the product surface ( y 0 ), will greatly improve the ability to estimate the emission rate of SVOCs from these products and to assess human exposure. The objective of this study was to measure y 0 for different PVC products and to evaluate its relationship with the material-phase concentrations ( C 0 ). Also, C 0 and y 0 data from other sources were included, resulting in a substantially larger data set ( N total = 34, T = 25 °C) than found in previous studies. The results show that the material/gas equilibrium relationship does not follow Raoult's law and that therefore the assumption of an ideal solution is invalid. Instead, Henry's law applies, and the Henry's law constant for all target SVOCs consists of the respective pure liquid vapor pressure and an activity coefficient γ, which accounts for the nonideal nature of the solution. For individual SVOCs, a simple partitioning relationship exists, but Henry's law is more generally applicable and will be of greater value in rapid exposure assessment procedures.

  4. Degradation of polyvinyl chloride (PVC) / hydrolyzed collagen (HC) blends active sludge test.

    Science.gov (United States)

    Agafiţei, Gabriela-Elena; Pascu, Mihaela; Cazacu, Georgeta; Vasile, Cornelia

    2008-01-01

    Biodegradable polymers represent a solution for the environment protection: they decrease the landfill space, by declining the petrochemical sources, and offer also an alternative solution for the recycling. The behavior during degradation in the presence of active sludge of some polyvinyl chloride (PVC) based blends with variable content of hydrolyzed collagen (HC) has been followed. Some samples were subjected to UV irradiation, for 30 hours. The modifications induced in the environment by the polymer systems (pH variation, bacterial composition), as well as the changes of the properties of the blends (weight losses, aspect etc.) were studied. During the first moments of degradation in active sludge, all the samples absorbed water, behavior which favored the biodegradation. The bacteriological analysis of the sludge indicates the presence of some microbiological species. Generally, the populations of microorganisms decrease, excepting the sulphito-reducing anaerobic bacteria, the actinomycetes and other anaerobic bacteria. PVC/HC blends are degraded with a significant rate in active sewage sludge. More susceptible for the degradation are the UV irradiated blends. After the migration of the components with a small molecular mass in the environment, the natural polymer is degraded. The degradation effect increases with the content in the natural polymer.

  5. Construction of PVC Extrusions for the NOνA Near and Far Detectors

    Science.gov (United States)

    Phan-Budd, S.

    NOνA, or NuMIOff-Axis νe Appearance experiment, is a long-baseline neutrino experiment using an off-axis beam produced by the main injector (NuMI) neutrino beamline at Fermilab. The experiment is designed to study νμ to νe oscillations.It consistsoftwoPVCand liquid scintillator detectorsanda beamline upgrade. Thefar detector weighs 14 kton and will be located in Ash River, Minnesota, 810 km from NuMI. The smaller, 220 ton near detector will be located underground at Fermi National Accelerator Laboratory. Each detector consists of planes of PVC extrusions containing liquid scintillator and wavelength shifting fiber. The PVC extrusions are made using a formula specially designed for high reflectivity, ease of extrusion and tensile qualities. Custom extrusion dies and extruding procedures havebeencreatedto ensureauniformproductthatholdstostrict dimensionalandmaterial tolerances.The construction of the NOνAnear detector on the surface (NDOS) extrusions will be presented, addressing the challenges of creating physics qualityPVCextrusionsandtheQA techniquesusedto ensurethat quality. Finally, preparationsfor construction of thefar detector willbe discussed.

  6. Development of novel textile and yarn actuators using plasticized PVC gel

    Science.gov (United States)

    Furuse, A.; Hashimoto, M.

    2017-04-01

    Soft actuators based on polymers are expected to be used for power sources to drive wearable robots which required in a wide range of fields such as medical, care and welfare, because they are light weight, flexible and quiet. Plasticized PVC gel which has a large deformation by applying a voltage and high driving stability in the atmosphere is considered as a suitable candidate material for development of soft actuator. Then, we proposed two kinds of novel flexible actuators constructed like yarn and textile by using plasticized PVC gel to develop soft actuator to realize a higher flexibility and low-voltage driving. In this study, we prepared prototypes of these actuators and clarify their characteristic. In addition, we considered the deformation model from its characteristics and geometric calculation. When a voltage was applied to their actuators, textile type actuator was contracted, while the twisted yarn type actuator was expanded. The deformation behavior of the proposed actuators could be found at a low voltage of 200V, the contraction strain of the textile actuator was about 27 %, and the expanding ratio of the yarn actuator was 0.4 %. Maximum contraction strain of textile actuator and expansion ratio of yarn actuator was 53% and 1.4% at 600 V, respectively. The calculation results from the proposed model were in roughly agreement with the experimental values. It indicated that deformation behavior of these actuators could estimate from models.

  7. The PVC technique a method to estimate the dissipation length scale in turbulent flows

    Science.gov (United States)

    Ho, Chih-Ming; Zohar, Yitshak

    1997-12-01

    A time-averaged length scale can be defined by a pair of successive turbulent-velocity derivatives, i.e. [dnu(x)/ dxn][prime prime or minute]/ [dn+1u(x)/ dxn+1][prime prime or minute]. The length scale associated with the zeroth- and the first-order derivatives, u[prime prime or minute]/u[prime prime or minute]x, is the Taylor microscale. In isotropic turbulence, this scale is the average length between zero crossings of the velocity signal. The average length between zero crossings of the first velocity derivative, i.e. u[prime prime or minute]x/u[prime prime or minute]xx, can be reliably obtained by using the peak-valley-counting (PVC) technique. We have found that the most probable scale, rather than the average, equals the wavelength at the peak of the dissipation spectrum in a plane mixing layer (Zohar & Ho 1996). In this study, we experimentally investigate the generality of applying the PVC technique to estimate the dissipation scale in three basic turbulent shear flows: a flat-plate boundary layer, a wake behind a two-dimensional cylinder and a plane mixing layer. We also analytically explore the quantitative relationships among this length scale and the Kolmogorov and Taylor microscales.

  8. Ionophore-based potentiometric PVC membrane sensors for determination of phenobarbitone in pharmaceutical formulations

    Directory of Open Access Journals (Sweden)

    Alrabiah Haitham

    2016-12-01

    Full Text Available The fabrication and development of two polyvinyl chloride (PVC membrane sensors for assaying phenobarbitone sodium are described. Sensors 1 and 2 were fabricated utilizing β- or γ-cyclodextrin as ionophore in the presence of tridodecylmethylammonium chloride as a membrane additive, and PVC and dioctyl phthalate as plasticizer. The analytical parameters of both sensors were evaluated according to the IUPAC guidelines. The proposed sensors showed rapid, stable anionic response (-59.1 and -62.0 mV per decade over a relatively wide phenobarbitone concentration range (5.0 × 10-6-1 × 10-2 and 8 × 10-6-1 × 10-2 mol L-1 in the pH range of 9-11. The limit of detection was 3.5 × 10-6 and 7.0 × 10-6 mol L-1 for sensors 1 and 2, respectively. The fabricated sensors showed high selectivity for phenobarbitone over the investigated foreign species. An average recovery of 2.54 μg mL-1 phenobarbitone sodium was 97.4 and 101.1 %, while the mean relative standard deviation was 3.0 and 2.1 %, for sensors 1 and 2, respectively. The results acquired for determination of phenobarbitone in its dosage forms utilizing the proposed sensors are in good agreement with those obtained by the British Pharmacopoeial method.

  9. Effect of the Triaxiality in Plane Stress Conditions. Triaxiality Effect in a PVC Material

    Directory of Open Access Journals (Sweden)

    N. Selini

    2013-02-01

    Full Text Available Polymer materials are gaining more and more importance in engineering applications. A new methodology of analysis is required in order to assess the capability of such material in withstanding complex loads. Therefore, the behavior of these materials currently arouses a great research interest. The use of PVC plastic pipes in pressure vessels and pipelines has increased rapidly in the last decade. In order to determine the plastic behavior of PVC, an experimental method is presented. Through the results obtained from experimental tests, in the first part of this paper, we investigate the use of a phenomenological model proposed by G’Sell and Jonas. The true stress-strain response under large plastic deformation was investigated in different stress triaxiality frameworks. Particular attention was given to volumetric strain evolution, separation resulting from elastic volumetric strain, plastic volumetric strain and pure shear. The effect of stress triaxiality on plastic instability and fracture strain was also examined. The deformation process should be considered as explained, and the anisotropic plastic response induced by the deformation could be introduced in constitutive equations of G’Sell.

  10. Sifat elektrik dan termal nanokomposit poly(vinyl chloride (PVC/low density polyethylene (LDPE

    Directory of Open Access Journals (Sweden)

    Arum Yuniari

    2014-06-01

    Full Text Available One of the most serious problems encountered in poly(vinyl chloride (PVC processing is due to low thermal stability of the PVC. The purpose of the study was to determine the effect of LDPE and flame retardant on to the electrical and thermal nanocomposites properties The nanocomposites were prepared using a laboplastomill with (15; 20; 25 and 30 phr LDPE and (30 and 35 phr flame retardant at 215 ºC and 50 rpm rotor speed. The thermal properties of nanocomposite was evaluated by TGA/DTA and DSC, electrical properties was evaluated by volume resistivity. Thermal analysis results revealed that decomposition of nanocomposites occured at 280 ºC. DSC results show that crystalisation temperatur (Tc at 250 ºC, melting temperature (Tm at 260 ºC and glass temperature (Tg at 60 ºC. The IR spectra of nanocomposites showed that there was absorption at 1579 cm-1 formed polyene (C=C. The electrical testing of nanocomposites fullfill the quality requirements of SNI 04-6504-2001 Lampu swaballast untuk pelayanan umum-persyaratan keselamatan ≥ 4 MΩ..

  11. Effects of Sulfate, Chloride, and Bicarbonate on Iron Stability in a PVC-U Drinking Pipe

    Directory of Open Access Journals (Sweden)

    Jiaying Wang

    2017-06-01

    Full Text Available In order to describe iron stability in plastic pipes and to ensure the drinking water security, the influence factors and rules for iron adsorption and release were studied, dependent on the Unplasticized poly (vinyl chloride (PVC-U drinking pipes employed in this research. In this paper, sulfate, chloride, and bicarbonate, as well as synthesized models, were chosen to investigate the iron stability on the inner wall of PVC-U drinking pipes. The existence of the three kinds of anions could significantly affect the process of iron adsorption, and a positive association was found between the level of anion concentration and the adsorption rate. However, the scaling formed on the inner surface of the pipes would be released into the water under certain conditions. The Larson Index (LI, used for a synthetic consideration of anion effects on iron stability, was selected to investigate the iron release under multi-factor conditions. Moreover, a well fitted linear model was established to gain a better understanding of iron release under multi-factor conditions. The simulation results demonstrated that the linear model was better fitted than the LI model for the prediction of iron release.

  12. Portable e-Tongue based on Multi-channel LAPS Array with PVC Membrane for Rapid Environment Detection

    Science.gov (United States)

    Ha, D.; Yu, H.; Hu, N.; Wu, C. X.; Zhou, J.; Kirsanov, Dmitry; Legin, Andrey; Wang, P.

    2011-09-01

    A new kind of portable e-Tongue based on multi-channel LAPS array with PVC membrane has been designed for the rapid detection of environment situation, especially the seawater. It has the great advantages of depositing membranes which are offered by Chemistry Department, Saint-Petersburg State University on the sensors artificially with convenience and efficiency. To detect various heavy metal ions (Pb2+, Cd2+, Zn2+) simultaneously, respective Polyvinyl Chloride (PVC) membrane could be prepared on the surface of the silicon-based sensor in different channel.

  13. Excellent impact performance of PVC pipeline materials in gas distribution networks after many years of service (CD-rom)

    OpenAIRE

    Visser, Roy; Hermkens, R.M.J.; Wolters, Mannes; Weller, J.; Warnet, Laurent; Beckervordersandforth, C.; Verberg, G.H.B.; Kramer, M.

    2008-01-01

    It has been about fifty years ago since the first unplasticized poly(vinyl chloride) (uPVC) pipes were installed for use in gas distribution purposes. Currently, about 22,500 km of uPVC is still in use in the Dutch gas distribution network. The pipes were originally designed for a lifetime of 50 years, but due to positive experiences the question arises if (and how long) the lifetime can be extended without any concessions to safety. This is supported by the data of leak surveys presented in ...

  14. Determination of the Composition and Quantity of Phthalate Ester Additives in PVC Children's Toys. Greenpeace Research Laboratories Technical Note 06/97.

    Science.gov (United States)

    Stringer, Ruth; Labounskaia, Irina; Santillo, David; Johnston, Paul; Siddorn, John; Stephenson, Angela

    Polyvinyl chloride (vinyl or PVC) is widely used in toys and other children's products. This study, conducted by Greenpeace, examined the composition and quantity of phthalate ester additives in children's PVC toys, used to give the toys added flexibility. Drawn from 17 countries, a total of 71 toys designed to be chewed by babies and young…

  15. High photocatalytic degradation activity of the polyvinyl chloride (PVC)-vitamin C (VC)-TiO2 nano-composite film.

    Science.gov (United States)

    Yang, Changjun; Gong, Chuqing; Peng, Tianyou; Deng, Kejian; Zan, Ling

    2010-06-15

    A novel photodegradable polyvinyl chloride (PVC)-vitamin C (VC)-TiO(2) nano-composite film was prepared by embedding VC modified nano-TiO(2) photocatalyst into the commercial PVC plastic. The solid-phase photocatalytic degradation behavior of PVC-VC-TiO(2) nano-composite film under UV light irradiation was investigated and compared with those of the PVC-TiO(2) film and the pure PVC film, with the aid of UV-Vis spectroscopy, scanning electron microscopy (SEM), weight loss monitoring, and X-ray diffraction spectra (XRD). The results show that PVC-VC-TiO(2) nano-composite film has a high photocatalytic activity; the photocatalytic degradation rate of it is two times higher than that of PVC-TiO(2) film and fifteen times higher than that of pure PVC film. The optimal mass ratio of VC to TiO(2) is found to be 0.5. The mechanism of enhancing photocatalytic activity is attributed to the formation of a Ti(IV)-VC charge-transfer complex with five-member chelate ring structure and a rapid photogenerated charge separation is thus achieved. Copyright 2010 Elsevier B.V. All rights reserved.

  16. Designed biocompatible nano-inhibitor based on poly(β-cyclodextrin-ester) for reduction of the DEHP migration from plasticized PVC.

    Science.gov (United States)

    Raeisi, Ahmad; Faghihi, Khalil; Shabanian, Meisam

    2017-10-15

    The easy migration of di(2-ethylhexyl) phthalate (DEHP) from the plasticized PVC (P-PVC) poses a serious threat to human health and the ecosystems. Thus, its control migration from the P-PVC products is very important. In this work, a poly(β-cyclodextrin-ester) network (β-CDP) was synthesized via reaction of β-cyclodextrin with 3,3',4,4'-benzophenone tetracarboxylic dianhydride. As a potential inhibitor for reduction of the DEHP migration, the β-CDP was grafted to Fe 3 O 4 nanoparticles. Poly(β-cyclodextrin-ester) functionalized Fe 3 O 4 nanoparticles (MNP-CDP) has been used in PVC/DEHP system as a reactive nano-inhibitor to reduce DEHP migration. Thermal stability and mechanical properties of obtained films were investigated. DEHP migration tests of the P-PVC films were also carried out by using Gas chromatography. It was found that by incorporating the small amounts of nano-inhibitor in PVC/DEHP system, the migration of DEHP effectively reduced from the P-PVC samples about 65% without any serious changes in mechanical and thermal properties of the P-PVC films. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Numerical modelling of crural fascia mechanical interaction with muscular compartments.

    Science.gov (United States)

    Pavan, Piero G; Pachera, Paola; Natali, Arturo N

    2015-05-01

    The interaction of the crural fascia with muscular compartments and surrounding tissues can be at the origin of different pathologies, such as compartment syndrome. This pathology consists in the onset of excessive intracompartmental pressure, which can have serious consequences for the patient, compromising blood circulation. The investigation of compartment syndrome etiology also takes into account the alteration of crural fascia mechanical properties as a cause of the syndrome, where the fascial stiffening would result in the rise of intracompartmental pressure. This work presents a computational approach toward evaluating some biomechanical aspects of the problem, within the context of a more global viewpoint. Finite element analyses of the interaction phenomena of the crural fascia with adjacent regions are reported here. This study includes the effects of a fascial stiffness increase along the proximal-distal direction and their possible clinical implications. Furthermore, the relationship between different pre-strain levels of the crural fascia in the proximal-distal direction and the rise of internal pressure in muscular compartments are considered. The numerical analyses can clarify which aspects could be directly implied in the rise of compartment syndrome, leading to greater insight into muscle-fascia mechanical phenomena, as well as promoting experimental investigation and clinical analysis of the syndrome. © IMechE 2015.

  18. Membrane order in the plasma membrane and endocytic recycling compartment.

    Science.gov (United States)

    Iaea, David B; Maxfield, Frederick R

    2017-01-01

    The cholesterol content of membranes plays an important role in organizing membranes for signal transduction and protein trafficking as well as in modulating the biophysical properties of membranes. While the properties of model or isolated membranes have been extensively studied, there has been little evaluation of internal membranes in living cells. Here, we use a Nile Red based probe, NR12S, and ratiometric live cell imaging, to analyze the membrane order of the plasma membrane and endocytic recycling compartment. We find that after a brief incubation to allow endocytosis, NR12S is distributed between the plasma membrane and the endocytic recycling compartment. The NR12S reports that the endocytic recycling compartment is more highly ordered than the plasma membrane. We also find that the plasma membrane and the endocytic recycling compartment are differentially affected by altering cellular cholesterol levels. The membrane order of the plasma membrane, but not the endocytic recycling compartment, is altered significantly when cellular cholesterol content is increased or decreased by 20%. These results demonstrate that changes in cellular cholesterol differentially alter membrane order within different organelles.

  19. The effect of white or grey PVC pipe and its joint solvents (primer and cement) on odour problems in drinking water distribution systems.

    Science.gov (United States)

    Wiesenthal, K E; Suffet, I H

    2007-01-01

    A study of the production of odour-causing compounds was conducted from the leaching of polyvinylchloride (PVC) pipe and its joints, primer and cement, into drinking water distribution systems. Flavour Profile Analysis (FPA), closed-loop stripping analysis--gas chromatography/mass spectrometry (CLSA-GC/MS) and sensory-GC analysis of white or grey PVC alone found no odour-causing compounds produced during the leaching experiments. FPA analysis of the PVC's primer and cement leached alone and/or when applied to grey or white PVC pipes produced a glue/varnish odour. A sweet/phenolic odour replaced the glue/varnish odour after the leached media were diluted with Milli-Q water to threshold odour intensity. Three compounds were responsible for the sweet/phenolic odour and were observed by sensoryGC analysis. The leaching study of the PVC pipe with its joint solvents (primer and cement) concluded that the original solvent compounds, and their reaction products that formed during the bonding process on the PVC pipe, were a primary source of the glue/varnish odour. The original compounds of the PVC primer and cement were not detected by CLSA-GC/MS, due to their high volatility during the CLSA extraction method and/or these compounds appeared in a solvent peak of the GC/MS analysis. However, the original primer and cement chemicals (acetone, tetrahydrofuran, methyl ethyl ketone, and cyclohexanone) had a glue/varnish odour. A total of nine odorous GC peaks were produced as reaction products from leaching of primer in water and white or grey PVC pipe with primer and cement, and white or grey PVC with primer only. None of these compounds were among the chemical ingredients in the original primer or cement. Four GC peaks with a sweet/phenolic odour were present due to the reaction products of the cement leached with white or grey PVC. None of these compounds were positively identified.

  20. In vitro quality of apheresis platelets divided into paediatric-sized units and stored in PVC bags plasticised with TOTM, BTHC or DINCH.

    Science.gov (United States)

    Bashir, S; Meli, A; Cardigan, R

    2018-04-11

    Two of the predictive factors of the quality of small volumes of platelets suitable for paediatric use are bag size and material. This study evaluated the storage properties of paediatric platelet aliquots in TOTM-, BTHC- or DINCH-PVC bags. (i) Three apheresis platelet concentrates (PC) were pooled and split into three units. One was retained as an adult unit (control; polyolefin bag). The second and third units were split into four MacoPharma TOTM-PVC and BTHC-PVC paediatric bags, respectively. (ii) Two apheresis PC were pooled and split into two units. One PC was retained as an adult unit, and the other was split into four Fresenius DINCH-PVC paediatric bags. Testing was performed on storage for pH, blood gases, hypotonic shock response, soluble CD62P, LDH, glucose and lactate, ATP, CD62P, CD63, platelet-derived microparticles and annexin V. The volumes, platelet yields and pH of all paediatric units met local specifications. The TOTM-PVC bag showed no worse quality than the adult bag up to day 7 for all parameters studied, and it maintained pH higher than BTHC-PVC and DINCH-PVC over storage. The BTHC-PVC bag was shown to be the most gas permeable; however, it had the highest glucose consumption rates and the highest platelet activation. All bags showed an acceptable in vitro quality. Overall, the TOTM-PVC paediatric bag showed better platelet quality compared to the other storage bags, whereas storage in the BTHC-PVC bag resulted in poorer platelet quality. © 2018 British Blood Transfusion Society.

  1. Increased pressure within the abdominal compartment: intra-abdominal hypertension and the abdominal compartment syndrome.

    Science.gov (United States)

    Roberts, Derek J; Ball, Chad G; Kirkpatrick, Andrew W

    2016-04-01

    This article reviews recent developments related to intra-abdominal hypertension (IAH)/abdominal compartment syndrome (ACS) and clinical practice guidelines published in 2013. IAH/ACS often develops because of the acute intestinal distress syndrome. Although the incidence of postinjury ACS is decreasing, IAH remains common and associated with significant morbidity and mortality among critically ill/injured patients. Many risk factors for IAH include those findings suggested to be indications for use of damage control surgery in trauma patients. Medical management strategies for IAH/ACS include sedation/analgesia, neuromuscular blocking and prokinetic agents, enteral decompression tubes, interventions that decrease fluid balance, and percutaneous catheter drainage. IAH/ACS may be prevented in patients undergoing laparotomy by leaving the abdomen open where appropriate. If ACS cannot be prevented with medical or surgical management strategies or treated with percutaneous catheter drainage, guidelines recommend urgent decompressive laparotomy. Use of negative pressure peritoneal therapy for temporary closure of the open abdomen may improve the systemic inflammatory response and patient-important outcomes. In the last 15 years, investigators have better clarified the pathogenesis, epidemiology, diagnosis, and appropriate prevention of IAH/ACS. Subsequent study should be aimed at understanding which treatments effectively lower intra-abdominal pressure and whether these treatments ultimately affect patient-important outcomes.

  2. A physical probabilistic model to predict failure rates in buried PVC pipelines

    International Nuclear Information System (INIS)

    Davis, P.; Burn, S.; Moglia, M.; Gould, S.

    2007-01-01

    For older water pipeline materials such as cast iron and asbestos cement, future pipe failure rates can be extrapolated from large volumes of existing historical failure data held by water utilities. However, for newer pipeline materials such as polyvinyl chloride (PVC), only limited failure data exists and confident forecasts of future pipe failures cannot be made from historical data alone. To solve this problem, this paper presents a physical probabilistic model, which has been developed to estimate failure rates in buried PVC pipelines as they age. The model assumes that under in-service operating conditions, crack initiation can occur from inherent defects located in the pipe wall. Linear elastic fracture mechanics theory is used to predict the time to brittle fracture for pipes with internal defects subjected to combined internal pressure and soil deflection loading together with through-wall residual stress. To include uncertainty in the failure process, inherent defect size is treated as a stochastic variable, and modelled with an appropriate probability distribution. Microscopic examination of fracture surfaces from field failures in Australian PVC pipes suggests that the 2-parameter Weibull distribution can be applied. Monte Carlo simulation is then used to estimate lifetime probability distributions for pipes with internal defects, subjected to typical operating conditions. As with inherent defect size, the 2-parameter Weibull distribution is shown to be appropriate to model uncertainty in predicted pipe lifetime. The Weibull hazard function for pipe lifetime is then used to estimate the expected failure rate (per pipe length/per year) as a function of pipe age. To validate the model, predicted failure rates are compared to aggregated failure data from 17 UK water utilities obtained from the United Kingdom Water Industry Research (UKWIR) National Mains Failure Database. In the absence of actual operating pressure data in the UKWIR database, typical

  3. Exercise Induced Rhabdomyolysis with Compartment Syndrome and Renal Failure

    Directory of Open Access Journals (Sweden)

    Mary Colleen Bhalla

    2014-01-01

    Full Text Available Exertional rhabdomyolysis is sequela that is occasionally seen after strenuous exercise. The progression to compartment syndrome or renal failure is a rare complication that requires prompt recognition and treatment to prevent morbidity (Giannoglou et al. 2007. We present a case of a 22-year-old college football player who presented to the emergency department (ED after a typical leg workout as part of his weight conditioning. He was found to have rhabdomyolysis with evidence of renal insufficiency. His condition progressed to bilateral compartment syndrome and renal failure requiring dialysis. After bilateral fasciotomies were performed he had resolution of his compartment syndrome. He continued to be dialysis dependent and had no return of his renal function at discharge 12 days after admission.

  4. Psittacine paranasal sinus--a new definition of compartments.

    Science.gov (United States)

    Artmann, A; Henninger, W

    2001-12-01

    Documentation of the psittacine paranasal sinuses has been limited. To provide more published detail, spiral computed tomography (CT) was used to scan the cephalic and cervical region from cadavers of 10 psittacine birds (Ara ararauna, Ara chloroptera, Ara macao, and Anodorhynchus hyacinthinus). Skeletal studies, histologic examinations, and evaluation of deep-frozen sections and anatomic preparations confirmed the results of the CT scans. New morphologic details of the paranasal sinus and some compartments were discovered. The paranasal sinuses of these macaws consist of two unpaired rostral compartments, followed caudally by eight paired compartments. Histologic examinations revealed that the walls of the paranasal sinuses consist of flat or cubic monolayer epithelium with underlying connective tissue. The described method of CT examination of these macaws, especially the positioning, scan orientation and parameters, and documentation of the normal paranasal sinus, provides a basis for future clinical use of CT.

  5. High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas-liquid fluidized bed reactor.

    Science.gov (United States)

    Yuan, G; Chen, D; Yin, L; Wang, Z; Zhao, L; Wang, J Y

    2014-06-01

    In this research a gas-liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas-liquid fluidized bed reactor was running at 280-320 °C, where hot N2 was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N2 to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 °C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N2 gas was set around 0.47-0.85 Nm(3) kg(-1) for the molten PVC. Larger N2 flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N2 flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas-liquid fluidized bed reactor for dechlorination. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. A Laboratory Experimental Study: An FBG-PVC Tube Integrated Device for Monitoring the Slip Surface of Landslides.

    Science.gov (United States)

    Wang, Kai; Zhang, Shaojie; Chen, Jiang; Teng, Pengxiao; Wei, Fangqiang; Chen, Qiao

    2017-10-30

    A new detection device was designed by integrating fiber Bragg grating (FBG) and polyvinyl chloride (PVC) tube in order to monitor the slip surface of a landslide. Using this new FBG-based device, a corresponding slope model with a pre-set slip surface was designed, and seven tests with different soil properties were carried out in laboratory conditions. The FBG sensing fibers were fixed on the PVC tube to measure strain distributions of PVC tube at different elevation. Test results indicated that the PVC tube could keep deformation compatible with soil mass. The new device was able to monitor slip surface location before sliding occurrence, and the location of monitored slip surface was about 1-2 cm above the pre-set slip surface, which basically agreed with presupposition results. The monitoring results are expected to be used to pre-estimate landslide volume and provide a beneficial option for evaluating the potential impact of landslides on shipping safety in the Three Gorges area.

  7. Studying DEHP migration in plasticized PVC used for blood bags by coupling Raman confocal microscopy to UV spectroscopy.

    Science.gov (United States)

    Al Salloum, H; Saunier, J; Tfayli, A; Yagoubi, N

    2016-04-01

    Plasticized PVC is widely used to make medical devices such as tubing, perfusion bags and blood bags. By using confocal Raman microscopy on a PVC sheet plasticized with around 40% of di-(2-ethylhexyl)phthalate (DEHP), we propose a simple and sensitive approach to studying and understanding the diffusion of plasticizers from polymers into the surrounding media. Moreover, we sought to correlate our findings to standard measurements conducted by UV spectroscopy. This study showed differences in the concentration gradient observed due to the diffusion of the plasticizer inside a PVC sheet. We can thus follow the critical DEHP ratios that can impact the diffusion process. Water and ethanol were chosen as storage media: in ethanol, the lowest concentration of DEHP was observed at the surface resulting in the formation of a less plasticized layer near the interface; unlike ethanol, PVC sheets stored in water showed a greater concentration of DEHP on the film surface as an exudation of DEHP onto the surface. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. A PVC-foam material model based on a thermodynamically elasto-plastic-damage framework exhibiting failure and crushing

    NARCIS (Netherlands)

    Gielen, A.W.J.

    2008-01-01

    A well known foam for naval sandwiches is PVC (polyvinyl chloride) foam. This foam exhibits elasto-damage behavior under tension and elasto-plastic behavior under compression. A proper material model is required for the prediction of the failure and post-failure behavior of these sandwiches during

  9. PVC cling film in contact with cheese: health aspects related to global migration and specific migration of DEHA

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Naamansen, Ebbe Tubæk; Nielsen, Preben Aagård

    1995-01-01

    Following exposure to the food simulant olive oil for 10 days at 5, 20 or 40 degrees C a global migration ranging from 20 to 30 mg/dm(2) was detected from a common 'low migration' PVC film plasticized with a mixture of di-(ethylhexyl)adipate (DEHA) and a polymeric plasticizer. In a laboratory...

  10. An organotin mixture found in polyvinyl chloride (PVC) pipe is not immunotoxic to adult Sprague-Dawley rats.

    Science.gov (United States)

    DeWitt, Jamie C; Copeland, Carey B; Luebke, Robert W

    2008-01-01

    Organotin compounds used in polyvinyl chloride (PVC) pipe production are of concern to the U.S. Environmental Protection Agency (EPA) because they leach from supply pipes into drinking water and are reported multisystem toxicants. Immune function was assessed in male Sprague-Dawley rats exposed to the mixture of organotins used in PVC pipe production. Although several of these organotins are reported immunotoxicants, their immunotoxicity as a mixture when given by drinking water has not been evaluated. Adult male rats were given drinking water for 28 d containing a mixture of dibutyltin dichloride (DBTC), dimethyltin dichloride (DMTC), monobutyltin trichloride (MBT), and monomethyltin trichloride (MMT) in a 2:2:1:1 ratio, respectively, at 3 different concentrations (5:5:2.5:2.5, 10:10:5:5, or 20:20:10:10 mg organotin/L), MMT alone (20 or 40 mg MMT/L), or plain water as a control. Delayed-type hypersensitivity, antibody synthesis, and natural killer cell cytotoxicity were evaluated in separate endpoint groups (n = 8/dose; 24/endpoint) immediately after exposure ended. The evaluated immune functions were not affected by the mixture or by MMT alone. Our data suggest that immunotoxicity is unlikely to result from the concentration of organotins present in drinking water delivered via PVC pipes, as the concentrations used were several orders of magnitude higher than those expected to leach from PVC pipes.

  11. The use of graft materials in anterior compartment pelvic reconstruction.

    Science.gov (United States)

    Begley, J Sean; Kobashi, Kathleen C

    2004-10-01

    Since 1996, the number of reports in the urologic and gynecologic literature using synthetic and allograph prosthetics to enhance the durability of anterior compartment repairs have increased significantly. Central to the use of these prosthetics is long-term follow-up to demonstrate that their use actually confers a benefit to patients and surgeons alike. This review attempts to catalog those reports and the outcomes, with an emphasis on the cadaveric prolapse repair with sling, which is used by the authors for repair of anterior compartment prolapse with overt or occult genuine stress urinary incontinence.

  12. Cellular endocytic compartment localization of expressed canine CD1 molecules.

    Science.gov (United States)

    Schjaerff, Mette; Keller, Stefan M; Affolter, Verena K; Kristensen, Annemarie T; Moore, Peter F

    2016-12-01

    CD1 molecules are glycoproteins present primarily on dendritic cells (DCs), which recognize and present a variety of foreign- and self-lipid antigens to T-cells. Humans have five different CD1 isoforms that survey distinct cellular compartments allowing for recognition of a large repertoire of lipids. The canine CD1 family consists of seven functional CD1 molecules (canine CD1a2, CD1a6, CD1a8, CD1a9, CD1b, CD1c and CD1e) and one presumed non-functional isoform (canine CD1d) due to a disrupted gene structure. The aim of this study was to describe in vitro steady-state localization ptterns of canine CD1 isoforms and their correlation with endocytic organelles. GFP-fused canine CD1 293T cell transfectants were stained with markers for early endocytic compartments (EEA-1) and late endocytic/lysosomal compartments (LAMP-1), respectively, and analyzed by confocal microscopy. Canine CD1a molecules localized to the plasma membrane and partially to the early endocytic compartment, but not to late endosomes or lysosomes. In contrast, canine CD1b was highly associated with late endosomal/lysosomal compartments and showed a predominant intracellular expression pattern. Canine CD1c protein expression localized more promiscuously to both the early endosomal compartments and the late endosomal/lysosomal compartments. The canine CD1e molecule showed a strictly intracellular expression with a partial overlap with late endosomal/lysosomal compartments. Lastly, canine CD1d was expressed abnormally showing only a diminished GFP expression. In conclusion, canine CD1 transfectants show distinct localization patterns that are similar to human CD1 proteins with the exception of the canine CD1d isoform, which most likely is non-functional. These findings imply that canine CD1 localization overall resembles human CD1 trafficking patterns. This knowledge is important for the understanding of lipid antigen-receptor immunity in the dog. Copyright © 2016. Published by Elsevier B.V.

  13. Coated limestone as a filler for the production of PVC-products

    Directory of Open Access Journals (Sweden)

    Mihajlović Slavica

    2005-01-01

    Full Text Available The results of laboratory investigations of the possibility to obtain coated limestone for the production of PVC-products are presented in this paper. Limestone from the "Venčac" deposit (Aranđelovac, Serbia and Montenegro was used as the raw material. The investigations were carried out in two phases: obtaining the coated limestone and determination of the degree of coating. The results of the investigations showed that successful coating of the surface of the limestone particles with Ca-stearate (Ca-stearate content 3% was achieved in a vibro mill with rings and the obtained degree of coating was higher than 95%. The coating degree was determined in transmitted light by a polarization microscope applying the immersion method (water immersion.

  14. Experimental Investigation of Mechanical Properties of PVC Polymer under Different Heating and Cooling Conditions

    Directory of Open Access Journals (Sweden)

    Sarkawt Rostam

    2016-01-01

    Full Text Available Due to a widely increasing usage of polymers in various industrial applications, there should be a continuous need in doing research investigations for better understanding of their properties. These applications require the usage of the polymer in different working environments subjecting the material to various temperature ranges. In this paper, an experimental investigation of mechanical properties of polyvinyl chloride (PVC polymer under heating and cooling conditions is presented. For this purpose standard samples are prepared and tested in laboratory using universal material testing apparatus. The samples are tested under different conditions including the room temperature environment, cooling in a refrigerator, and heating at different heating temperatures. It is observed that the strength of the tested samples decreases with the increasing of heating temperature and accordingly the material becomes softer. Meanwhile the cooling environments give a clear increasing to the strength of the material.

  15. Studies of LENRA-Toughened PVC non-woven membranes prepared by electro spinning technique

    International Nuclear Information System (INIS)

    Dahlan Mohd; Mahathir Mohamed; Khirul Hafiz mohd Yusof

    2010-01-01

    Lately research in use of so-called green chemicals draws strong interest from research community due to the climate change issues. Malaysia is in strong position to take this advantage because we are among the world biggest producers of natural rubber and palm oil - the two sources of important green renewable chemical feedstock in the near future. For the last couple of years we have shown how modified natural rubbers especially liquid natural rubber and its derivatives such as liquid epoxidized natural rubber acrylate (LENRA) could be used in various applications via among others sol-gel technique and radiation curing technology. This time around we will show another application on how non-woven membranes made from PVC can be prepared by electro spinning technique using radiation curable LENRA as toughener. The electro spinning technique has great potential in producing nano fiber materials to be used in various applications to ensure sustainable energy and environments for the future. (author)

  16. Degradation of PVC/HC blends. II. Terrestrial plant growth test.

    Science.gov (United States)

    Pascu, Mihaela; Agafiţei, Gabriela-Elena; Profire, Lenuţa; Vasile, Cornelia

    2009-01-01

    The behavior at degradation by soil burial of some plasticized polyvinyl chloride (PVC) based blends with a variable content of hydrolyzed collagen (HC) has been followed. The modifications induced in the environment by the polymer systems (pH variation, physiologic state of the plants, assimilatory pigments) were studied. Using the growth test of the terrestrial plants, we followed the development of Triticum (wheat), Helianthus annus minimus (little sunflower), Pisum sativum (pea), and Vicia X hybrida hort, during a vegetation cycle. After the harvest, for each plant, the quantities of chlorophyll and carotenoidic pigments and of trace- and macroelements were determined. It was proved that, in the presence of polymer blends, the plants do not suffer morphological and physiological modifications, the products released in the culture soil being not toxic for the plants growth.

  17. Processing of nanocomposites EVA/PVC/MMT in twin-screw extruder

    International Nuclear Information System (INIS)

    Gehlen, A.; Barbutti Filho, W.R.; Francisquetti, E.L.; Andrade, M.Z.; Zattera, A.J.

    2010-01-01

    Polymeric nanocomposites have some superior properties when compared to conventional polymer composites and is one of the most promising fields in the nanotechnology research. In a EVA (ethylene vinyl acetate) /PVC (poly vinyl chloride) matrix was incorporated different types of montmorillonite clays (an inorganic (Na + ) and two organic modified (15A and 30B nanoclays). The mixtures were processed in a co-rotating twin-screw extruder at processing speeds of 200 and 400 rpm. Thermogravimetric analysis (TGA) shown that the inorganic and organic modified clays promoted a shift to higher temperatures in the degradation temperature., X-ray diffraction (XRD) and transmission electronic microscopy (TEM) shows a possible intercalation with the 15A clay, exfoliation with the 30B clay and formation of clusters in the Na + clay. For all clays studied, the increase in shear rate does not promote significant changes. (author)

  18. Plastic flow and failure in single point incremental forming of PVC sheets

    Directory of Open Access Journals (Sweden)

    P. A. F. Martins

    2014-05-01

    Full Text Available This paper presents an innovative and effective methodology to characterize plastic flow and failure in single point incremental forming (SPIF of polymers that allows determining the stresses and the accumulated values of ductile damage directly from the experimental values of strain at various positions over the deformed polymer sheets. The approach traces the deformation path of material elements in conical and pyramidal SPIF parts, undergoing linear strain loading paths from beginning until failure, and is built upon the generalization of the analytical framework conditions assumed by Glover et al. [1] to the pressure-sensitive yield surfaces of polymers under incompressible, non-associated, plastic flow. Experimentation in conventional and multi-stage SPIF of Polyvinylchloride (PVC sheets confirms the effectiveness of the proposed methodology and demonstrates that standard non-coupled damage models currently utilized in sheet metal forming are inapplicable to describe failure in polymers. Instead fracture forming limit lines (FFL’s should be employed.

  19. Carbon paste and PVC electrodes for the flow injection potentiometric determination of dextromethorphan.

    Science.gov (United States)

    Khaled, Elmorsy; Hassan, H N A; Mohamed, Gehad G; Seleim, A A

    2010-04-15

    The construction and performance characteristics of dextromethorphan (DXM) carbon paste (CPEs) and polyvinyl chloride (PVC) electrodes are described. Different modes for electrode modification, including incorporation of ion pairs (IPs), ion pairing agent or soaking the plain electrode in IPs suspension, have been used. Matrices compositions were optimized referring to the effect of modifier and plasticizer. The fabricated electrodes work satisfactorily in the concentration range from 10(-5) to 10(-2) mol L(-1) with fast response time (1.6s) and long operational lifetime (2 months). The developed electrodes have been successfully applied for the potentiometric determination of DXM in pharmaceutical formulation under batch and flow injection analysis (FIA) conditions. Under FIA conditions, the proposed electrodes allow the analysis of 90 samples h(-1) and offer the advantage of simplicity, accuracy and automation feasibility. The solubility products of various DXM-IPs were determined conductometrically. (c) 2010 Elsevier B.V. All rights reserved.

  20. Gliclazide as novel carrier in construction of PVC-based La(III)-selective membrane sensor.

    Science.gov (United States)

    Ganjali, Mohammad Reza; Daftari, Azadeh; Rezapour, Morteza; Puorsaberi, Tahereh; Haghgoo, Soheila

    2003-03-01

    A PVC-based sensor for La(3+) ions based on N-[hexahydrocyclopentapyrol-2((1H)yl)amino]carbonyl]-4-methyl benzene sulfonamide (gliclazide) as a novel carrier was prepared. The electrode exhibits a Nernstian response for La(3+) over a wide concentration range (1.0x10(-1)-1.0x10(-6) M) with a slope of 20.1 mV per decade. The limit of detection is 8.0x10(-7) M. The sensor has a very short response time (<15 s) and a useful working pH range of 4.0-8.0. The proposed membrane sensor shows excellent discriminating ability towards La(3+) ions with regard to several alkali, alkaline earth, transition and heavy metal ions. The electrode was successfully applied for determination of La(3+) in binary mixtures.

  1. Novel PVC membrane-based thoron ion selective electrode and its application: determination of zirconium.

    Science.gov (United States)

    Arida, Hassan A

    2008-06-30

    The construction, electrochemical evaluation and application of new electrode selective to the thoron reagent are reported. The electrode incorporates bathophenanthroline iron: thoron ion pair as electroactive sensing material, o-nitrophenyl octyl ether as plasticizer and PVC as support matrix, exhibits a Nernstian response to thoron with a slope of -29.7+/-1 mV per decade in a range of concentration from 1.0x10(-6) to 5.0x10(-2) mol L(-1), a detection limit of 6.0x10(-7) mol L(-1) and fast response time of less than 30 s. The proposed electrode is successfully applied to zirconium ion determination in aqueous samples using indirect potentiometry and the results obtained are compared with those provided by spectrophotometric analysis using thoron as complexing agent.

  2. Molecular Signatures for the PVC Clade (Planctomycetes, Verrucomicrobia, Chlamydiae, and Lentisphaerae) of Bacteria Provide Insights into Their Evolutionary Relationships.

    Science.gov (United States)

    Gupta, Radhey S; Bhandari, Vaibhav; Naushad, Hafiz Sohail

    2012-01-01

    The PVC superphylum is an amalgamation of species from the phyla Planctomycetes, Verrucomicrobia, and Chlamydiae, along with the Lentisphaerae, Poribacteria, and two other candidate divisions. The diverse species of this superphylum lack any significant marker that differentiates them from other bacteria. Recently, genome sequences for 37 species covering all of the main PVC groups of bacteria have become available. We have used these sequences to construct a phylogenetic tree based upon concatenated sequences for 16 proteins and identify molecular signatures in protein sequences that are specific for the species from these phyla or those providing molecular links among them. Of the useful molecular markers identified in the present work, six conserved signature indels (CSIs) in the proteins Cyt c oxidase, UvrD helicase, urease, and a helicase-domain containing protein are specific for the species from the Verrucomicrobia phylum; three other CSIs in an ABC transporter protein, cobyrinic acid ac-diamide synthase, and SpoVG protein are specific for the Planctomycetes species. Additionally, a 3 aa insert in the RpoB protein is uniquely present in all sequenced Chlamydiae, Verrucomicrobia, and Lentisphaerae species, providing evidence for the shared ancestry of the species from these three phyla. Lastly, we have also identified a conserved protein of unknown function that is exclusively found in all sequenced species from the phyla Chlamydiae, Verrucomicrobia, Lentisphaerae, and Planctomycetes suggesting a specific linkage among them. The absence of this protein in Poribacteria, which branches separately from other members of the PVC clade, indicates that it is not specifically related to the PVC clade of bacteria. The molecular markers described here in addition to clarifying the evolutionary relationships among the PVC clade of bacteria also provide novel tools for their identification and for genetic and biochemical studies on these organisms.

  3. Molecular Signatures for the PVC Clade (Planctomycetes, Verrucomicrobia, Chlamydiae, and Lentisphaerae) of Bacteria Provide Insights into Their Evolutionary Relationships

    Science.gov (United States)

    Gupta, Radhey S.; Bhandari, Vaibhav; Naushad, Hafiz Sohail

    2012-01-01

    The PVC superphylum is an amalgamation of species from the phyla Planctomycetes, Verrucomicrobia, and Chlamydiae, along with the Lentisphaerae, Poribacteria, and two other candidate divisions. The diverse species of this superphylum lack any significant marker that differentiates them from other bacteria. Recently, genome sequences for 37 species covering all of the main PVC groups of bacteria have become available. We have used these sequences to construct a phylogenetic tree based upon concatenated sequences for 16 proteins and identify molecular signatures in protein sequences that are specific for the species from these phyla or those providing molecular links among them. Of the useful molecular markers identified in the present work, six conserved signature indels (CSIs) in the proteins Cyt c oxidase, UvrD helicase, urease, and a helicase-domain containing protein are specific for the species from the Verrucomicrobia phylum; three other CSIs in an ABC transporter protein, cobyrinic acid ac-diamide synthase, and SpoVG protein are specific for the Planctomycetes species. Additionally, a 3 aa insert in the RpoB protein is uniquely present in all sequenced Chlamydiae, Verrucomicrobia, and Lentisphaerae species, providing evidence for the shared ancestry of the species from these three phyla. Lastly, we have also identified a conserved protein of unknown function that is exclusively found in all sequenced species from the phyla Chlamydiae, Verrucomicrobia, Lentisphaerae, and Planctomycetes suggesting a specific linkage among them. The absence of this protein in Poribacteria, which branches separately from other members of the PVC clade, indicates that it is not specifically related to the PVC clade of bacteria. The molecular markers described here in addition to clarifying the evolutionary relationships among the PVC clade of bacteria also provide novel tools for their identification and for genetic and biochemical studies on these organisms. PMID:23060863

  4. Identification and quantification of 14 phthalates and 5 non-phthalate plasticizers in PVC medical devices by GC-MS.

    Science.gov (United States)

    Gimeno, Pascal; Thomas, Sébastien; Bousquet, Claudine; Maggio, Annie-Françoise; Civade, Corinne; Brenier, Charlotte; Bonnet, Pierre-Antoine

    2014-02-15

    A GC/MS method was developed for the identification and quantification of 14 phthalates: 8 phthalates classified H360 (DBP, DEHP, BBP, DMEP, DnPP, DiPP, DPP and DiBP), 3 phthalates proposed to be forbidden in medical devices (DnOP, DiNP and DiDP) and 3 other phthalates none regulated (DMP, DCHP and DEP) which may interfere with hormone function. In order to identify and quantify other plasticizers that are commonly used in PVC medical devices such as DEHP substitute, 5 non-phthalate plasticizers (ATBC, DEHA, DEHT, TOTM, and DINCH) were included in this study. Analyses are carried out on a GC/MS system with electron impact ionization mode (EI). The separation of plasticizers is obtained on a cross-linked 5%-phenyl/95%-dimethylpolysiloxane capillary column 30m×0.25mm (i.d.)×0.25μm film thickness using a gradient temperature. Compounds quantification is performed by external calibration using an internal standard. Validation elements on standard solutions were determined using the ISO 12787 standard approach. Plasticizers are extracted from PVC medical devices using THF for dissolving the PVC part of the sample followed by precipitation of the PVC by addition of ethanol. The supernatant is injected into a GC/MS system after dilution in ethanol. Different validation elements, including extraction recoveries for all compounds or for DEHP a cross-validation of the extraction process using the European pharmacopoeia monograph 3.1.14 as reference method, are discussed. Results obtained on 61 medical devices in PVC and 12 raw materials used as plasticizers are given. Copyright © 2013 Elsevier B.V. All rights reserved.

  5. Preparation and characterization of polymer nanocomposites based on PVDF/PVC doped with graphene nanoparticles

    Directory of Open Access Journals (Sweden)

    I.S. Elashmawi

    Full Text Available Novel nanocomposites based on PVDF/PVC blend containing graphene oxide nanoparticles (GO were prepare using sonicator. IR analysis revealed that the addition of GO prompts a crystal transformation of α-phase of PVDF. The change of the structural before and after adding GO to PVDF/PVC were studied by X-ray diffraction. A decrease in activation energy gap from UV data was observed with increasing GO content, implying a variation of reactivity as a result of reaction extent. The variation of ε′ with frequency is nearly the same as that of ε″. At higher frequencies, the decrease of both ε′ and ε″ becomes nearly constant. The dispersion at lower frequencies ε′ of ε′ polarization is of Maxwell–Wagner interfacial polarization but at higher frequencies, it levels off. The behavior of conductivity (σAC tends to acquire constant values approaching it DC values. The values of σAC was increased after doped GO with exponential increase after the critical value of frequency. All nanocomposites behaved the same fashion revealing that a higher number of polarons were getting added to conducting pool in composites as graphene content was increased. Conduction mechanism appeared to be getting expedited with increasing frequency due to fact that increase in frequency enhances polaron hopping frequency. Keywords: Nanocomposites, Graphene oxide, FT-IR, X-ray, AC conductivity

  6. Rheology of PVC Plastisol: Formation of Immobilized Layer in Pseudoplastic Flow.

    Science.gov (United States)

    Nakajima, N.; Harrell, E. R.

    2001-06-01

    Hoffman in the early 1970s examined mechanism of dilatancy and fracture of plastisol under high-shear conditions. The samples were monodispersed spherical particles of PVC. He discovered formation of immobilized layer in the pseudoplastic flow preceding dilatancy and subsequent destruction of the layer at the fracture. However, his analysis was focused primarily on the mechanism of the fracture, and the mechanism of pseudoplastic flow remains unexplored. The present work begins with analyses of Hoffman's data to show that pseudoplastic flow, i.e., the decrease of viscosity with the increase of shear rate, is a result of the development of the immobilized layer and creation of a mobile layer of low-viscosity fluid. Hoffman took the mobile layer to consist of pure plasticizer. The present work shows that the mobile layer contains PVC particles. The thickness of mobile layer decreases (and the thickness of immobilized layer increases) with the increase of shear rate. The particle concentration and hence viscosity of the mobile layer decrease with the increase of shear rate. Similar analyses of our dynamic viscosity-frequency relationship show that (1) the pseudoplastic behavior is a result of formation of immobilized layer, which grows thicker with the increasing frequency, and (2) the mobile layer contains dispersed particles, the concentration of which decreases with increasing frequency. (3) A presence of coarse particles results in a tighter packing of the immobilized layer and lower viscosity of the mobile layer for a given volume fraction of particles. This explains why the presence and the amount of the coarse particles are important parameters in plastisol formulation. The elastic modulus-frequency relationship is also interpreted with the development of the immobilized layer, giving strain amplification. Copyright 2001 Academic Press.

  7. Software package to automate the design and production of translucent building structures made of pvc

    Directory of Open Access Journals (Sweden)

    Petrova Irina Yur’evna

    2016-08-01

    Full Text Available The article describes the features of the design and production of translucent building structures made of PVC. The analysis of the automation systems of this process currently existing on the market is carried out, their advantages and disadvantages are identified. Basing on this analysis, a set of requirements for automation systems for the design and production of translucent building structures made of PVC is formulated; the basic entities are involved in those business processes. The necessary functions for the main application and for dealers’ application are specified. The main application is based on technological platform 1C: Enterprise 8.2. The dealers’ module is .NET application and is developed with the use of Microsoft Visual Studio and Microsoft SQL Server because these software products have client versions free for end users (.NET Framework 4.0 Client Profile and Microsoft SQL Server 2008 Express. The features of the developed software complex implementation are described; the relevant charts are given. The scheme of system deployment and protocols of data exchange between 1C server, 1C client and dealer is presented. Also the functions supported by 1C module and .NET module are described. The article describes the content of class library developed for .NET module. The specification of integration of the two applications in a single software package is given. The features of the GUI organization are described; the corresponding screenshots are given. The possible ways of further development of the described software complex are presented and a conclusion about its competitiveness and expediency of new researches is made.

  8. Estudo do uso de plastificantes de fontes renovável em composições de PVC Study of the use of plasticizer from renewable sources in PVC compositions

    Directory of Open Access Journals (Sweden)

    Emerson Madaleno

    2009-01-01

    Full Text Available Polímeros sintéticos são largamente utilizados em diversos produtos devido às suas propriedades físicas, químicas e facilidade de transformação. O poli(cloreto de vinila, conhecido como PVC, é um dos polímeros mais versáteis desenvolvidos pelo homem, de grande utilidade para a sociedade moderna. Suas aplicações incluem: janelas, calhas de chuva, revestimentos de paredes, portas, papel de parede, mangueiras, brinquedos, calçados, bolsas de sangue e tubos para condução de água. Em todas estas aplicações são utilizados aditivos junto à resina de PVC, sendo que um dos aditivos mais utilizados é o plastificante. Este estudo apresenta a análise comparativa de formulações flexíveis de PVC, baseada em dois plastificantes de origem renovável (óleo vegetal modificado - OVM e óleo vegetal modificado e epoxidado - OVME, e também dois plastificantes petroquímicos convencionais, di(2-etilhexil ftalato - (DEHP ou DOP e di(2-etilhexil adipato - (DEHA ou DOA. Não foram observadas diferenças significativas entre as propriedades mecânicas das formulações. Os diferentes plastificantes demonstram influenciar na dureza e resistência química das formulações, sendo que o grupo epóxi e a maior massa molar no plastificante vegetal apresentam maior compatibilidade com a resina de PVC. A análise de MEV apresenta uma provável exudação do plastificante OVM da matriz do PVC.Synthetic polymers have been widely used in manufactured products because of their physical and chemical properties and low cost of production. Poly(vinyl chloride, called PVC, is a versatile, inexpensive plastic whose use has become pervasive in modern society. Its applications include window frames, rain gutters, wall paneling, doors, wallpapers, flooring, garden furniture, toys, blood bags and pipes. In all of these applications additives are used, with plasticizers being among the most important. This work shows a comparative study among distinct

  9. Instant conditional transgenesis in the mouse hematopoietic compartment

    NARCIS (Netherlands)

    Csikós, Tamás; Reijmers, Rogier M.; Uren, Anthony G.; Spaargaren, Marcel; Pals, Steven T.

    2008-01-01

    Adoptive transfer of retrovirally transduced stem cells has recently been described for instant transgenesis in the hematopoietic compartment of mice. This method circumvents the need to manipulate the germline. However, cell type specific gene expression in this 'retrogenic' mouse model has

  10. The anammoxosome : An intracytoplasmic compartment in anammox bacteria

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Niftrik, L.A. van; Fuerst, J.A.; Kuenen, J.G.; Jetten, M.S.M.; Strous, M.

    2004-01-01

    Anammox bacteria belong to the phylum Planctomycetes and perform anaerobic ammonium oxidation (anammox); they oxidize ammonium with nitrite as the electron acceptor to yield dinitrogen gas. The anammox reaction takes place inside the anammoxosome: an intracytoplasmic compartment bounded by a single

  11. The anammoxosome: an intracytoplasmic compartment in anammox bacteria

    NARCIS (Netherlands)

    Niftrik, L.A.M.P. van; Fuerst, J.A.; Damste, J.S.S.; Kuenen, J.G.; Jetten, M.S.M.; Strous, M.

    2004-01-01

    Anammox bacteria belong to the phylum Planctomycetes and perform anaerobic ammonium oxidation (anammox); they oxidize ammonium with nitrite as the electron acceptor to yield dinitrogen gas. The anammox reaction takes place inside the anammoxosome: an intracytoplasmic compartment bounded by a single

  12. "Compartment"-syndrom på underben, atypisk traumemekanisme

    DEFF Research Database (Denmark)

    Larsen, Michael H; Nielsen, Henrik Toft; Wester, Jens Ulrik

    2003-01-01

    Acute compartment syndrome (CS) is a limb threatening condition which warrants emergency treatment. We describe a case of a 37-year-old man with acute CS developed without major trauma. Early diagnosis and prompt treatment by decompressive fasciotomy is of vital importance in order to preserve limb...

  13. latrogenic chronic compartment syndrome of leg due to ruptured ...

    African Journals Online (AJOL)

    A 45 year old male complaining of chronic pain and swelling of his left calf with features suggestive of chronic compartment syndrome following therapeutic aspiration of a popliteal cyst has been presented. It is a rare type of presentation which has not been reported to the knowledge of the authors. Review of literature and

  14. Evaluation of acute compartment syndrome of extremities in ...

    African Journals Online (AJOL)

    The aim of this study was to analyze the clinical signs of diagnosis, treatment and followup of the pediatric population presenting with acute compartment syndrome in the emergency room at an Institutional Level II trauma center. The study is a prospective case series. Thirty-two samples were selected from Institutional ...

  15. 19 CFR 123.24 - Sealing of conveyances or compartments.

    Science.gov (United States)

    2010-04-01

    ...; DEPARTMENT OF THE TREASURY CUSTOMS RELATIONS WITH CANADA AND MEXICO Shipments in Transit Through Canada or Mexico § 123.24 Sealing of conveyances or compartments. (a) Sealing required. Merchandise in transit...-bound seals may go forward without additional seals. (c) Carrier relieved of responsibility. The port...

  16. Chronic exertional compartment syndrome in the forearm of a rower

    African Journals Online (AJOL)

    2 2014. CASE STUDY. This case report describes chronic exertional compartment syndrome in the forearm of a professional rower. We consider this to be a rare anatomical location for this type of syndrome. Morever, not much is known about its clinical presentation and the subsequent optimal medical management thereof ...

  17. A wolf in wolf's clothing the abdominal compartment syndrome

    African Journals Online (AJOL)

    abdomen. These findings are consistent with the diagnosis of intra-abdominal compartment syndrome. In 1 case trauma was remote from the abdomen .... although they tend to develop most often in those who have undergone major vascular operations or suffered abdominal trauma. The effects of the pressure on the bowel ...

  18. Well-leg compartment syndrome after gynecological laparoscopic surgery

    DEFF Research Database (Denmark)

    Boesgaard-Kjer, Diana H; Boesgaard-Kjer, Daniel; Kjer, Jens Jørgen

    2013-01-01

    Well-leg compartment syndrome in the lower extremities after surgery in the lithotomy position is a rare but severe complication requiring early diagnosis and intervention. Several circumstances predispose to this condition as a consequence of increased intra-compartmental pressure, such as posit...

  19. Two-Compartment Pharmacokinetic Models for Chemical Engineers

    Science.gov (United States)

    Kanneganti, Kumud; Simon, Laurent

    2011-01-01

    The transport of potassium permanganate between two continuous-stirred vessels was investigated to help chemical and biomedical engineering students understand two-compartment pharmacokinetic models. Concepts of modeling, mass balance, parameter estimation and Laplace transform were applied to the two-unit process. A good agreement was achieved…

  20. Evaluation of acute compartment syndrome of extremities in ...

    African Journals Online (AJOL)

    Arun Kumar Agnihotri

    necrotic tissue in the histological examination. In our study, we also observed patchy necrosis of muscle fibers with perifascicular oedema3. We observed ischemic contractures in about 18.7% of our cases. In a series of 24 children with acute compartment syndrome, chronic contractures were reported only in 4.2% cases3.

  1. The abdominal compartment syndrome (ACS) in general surgery.

    Science.gov (United States)

    Bodnár, Zsolt; Sipka, Sándor; Hajdu, Zoltán

    2008-01-01

    The abdominal compartment syndrome is a life threatening clinical entity which can develop within the first 12 hours of intensive care unit admission in high-risk surgical patients. The aim of this paper is to show the definitions, ethiology, pathophysiology, diagnosis and treatment of this serious, not only surgical problem. The mortality due to the abdominal compartment syndrome is extremely high (38-71%). It can be defined as adverse physiologic consequences that occur as a result of an acute increase in the intraabdominal pressure. The most common causes are retroperitoneal haemorrhage, visceral oedema, pancreatitis, bowel obstruction, tense ascites, peritonitis, tumor. The mostly affected systems are cardiovascular, pulmonary, renal, central nervous systems and splanchnic organs. The gold standard diagnostic method is the continuous intra-abdominal pressure monitoring. The treatment consists of adequate fluid resuscitation and surgical decompression. We show three typical short case reports treated by the above mentioned theories. Intraabdominal hypertension and abdominal compartment syndrome are frequent clinical findings among acute general surgical patients. Patients with comparable demographics and acute severity of illness are more likely to die if intraabdominal hypertension or abdominal compartment syndrome is present. We conclude that the early recognition and surgical decompression is urgent.

  2. Recurrent Metachronous Acute Compartment Syndrome in the Legs ...

    African Journals Online (AJOL)

    METHODS: A seven-year-old boy presented with four separate episodes of acute compartment syndrome of the legs within three years. The recurrent nature of the illness prompted detail review of the records of the child. RESULTS: There was involvement of each leg twice between the ages of three and seven years ...

  3. 14 CFR 121.269 - Extinguishing agent container compartment temperature.

    Science.gov (United States)

    2010-01-01

    ... temperature. 121.269 Section 121.269 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF....269 Extinguishing agent container compartment temperature. Precautions must be taken to insure that the extinguishing agent containers are installed in places where reasonable temperatures can be...

  4. 14 CFR 125.167 - Extinguishing agent container compartment temperature.

    Science.gov (United States)

    2010-01-01

    ... temperature. 125.167 Section 125.167 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... Requirements § 125.167 Extinguishing agent container compartment temperature. Precautions must be taken to ensure that the extinguishing agent containers are installed in places where reasonable temperatures can...

  5. 14 CFR 135.170 - Materials for compartment interiors.

    Science.gov (United States)

    2010-01-01

    ... 26, 1984. (c) Thermal/acoustic insulation materials. For transport category airplanes type... manufactured after September 2, 2005, thermal/acoustic insulation materials installed in the fuselage must meet... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Materials for compartment interiors. 135...

  6. Abdominal compartment syndrome in patients with strangulated hernia.

    Science.gov (United States)

    Beltrán, M A; Villar, R A; Cruces, K S

    2008-12-01

    Intestinal obstruction (IO) leads to increased intra-abdominal pressure and abdominal compartment syndrome. The purpose of this study was to investigate the characteristics of abdominal compartment syndrome in patients with IO secondary to strangulated hernia. We studied 81 consecutive unselected patients presenting complicated hernias and IO. We measured intra-abdominal pressure using the intra-vesicular pressure method. Preoperative (15 min) intra-abdominal pressure was higher in patients with strangulated hernias. Postoperative (15 min) intra-abdominal pressure in both groups decreased to similar values. Intra-abdominal pressure was measured during the preoperative period in patients with strangulated hernias and during the postoperative period at 15 min (13.8 +/- 6.4 mmHg), 24 h (9.8 +/- 3.2 mmHg) and 48 h (7.4 +/- 2.4 mmHg). Abdominal compartment syndrome developed in 47% cases with strangulated hernias with a mortality of five patients. Serial measurements of intra-abdominal pressure evidenced the clinical severity of strangulated hernia. Intra-abdominal pressure measurement may be used as a predictor of intestinal strangulation in patients presenting acute abdominal compartment syndrome secondary to complicated hernia.

  7. Organic nano-compartments as biomimetic reactors, and protocells

    DEFF Research Database (Denmark)

    Monnard, Pierre-Alain; Ziock, Hans-Joachim; DeClue, Michael S.

    2008-01-01

    In recent years, nanoscale self-assembled structures have attracted ever increasing attention because of their potential to act as molecular templates for the synthesis of novel materials, delivery vehicles for therapeutic agents, and compartments defined at the molecular level that provide envir...

  8. Volume of the effect compartment in simulations of neuromuscular block

    NARCIS (Netherlands)

    Nigrovic, Vladimir; Proost, Johannes H.; Amann, Anton; Bhatt, Shashi B.

    2005-01-01

    Background: The study examines the role of the volume of the effect compartment in simulations of neuromuscular block (NMB) produced by nondepolarizing muscle relaxants. Methods: The molar amount of the postsynaptic receptors at the motor end plates in muscle was assumed constant; the apparent

  9. Compartment specific importance of glutathione during abiotic and biotic stress

    Directory of Open Access Journals (Sweden)

    Bernd eZechmann

    2014-10-01

    Full Text Available The tripeptide thiol glutathione (γ-L-glutamyl-L-cysteinyl-glycine is the most important sulfur containing antioxidant in plants and essential for plant defense against abiotic and biotic stress conditions. It is involved in the detoxification of reactive oxygen species, redox signaling, the modulation of defense gene expression and important for the regulation of enzymatic activities. Even though changes in glutathione contents are well documented in plants and its roles in plant defense are well established, still too little is known about its compartment specific importance during abiotic and biotic stress conditions. Due to technical advances in the visualization of glutathione and the redox state of plants through microscopical methods some progress was made in the last few years in studying the importance of subcellular glutathione contents during stress conditions in plants. This review summarizes the data available on compartment specific importance of glutathione in the protection against abiotic and biotic stress conditions such as high light stress, exposure to cadmium, drought, and pathogen attack (Pseudomonas, Botrytis, Tobacco Mosaic Virus. The data will be discussed in connection with the subcellular accumulation of ROS during these conditions and glutathione synthesis which are both highly compartment specific (e.g. glutathione synthesis takes place in chloroplasts and the cytosol. Thus this review will reveal the compartment specific importance of glutathione during abiotic and biotic stress conditions.

  10. Lower extremity compartment sindrome following coronary artery bypass.

    Science.gov (United States)

    Papas, T T; Mikroulis, D; Papanas, N; Lazarides, M K; Bougioukas, G

    2007-04-01

    Compartment syndrome is a constellation of symptoms and signs associated with abnormally elevated tissue pressure in the skeletal muscle of the extremities. It is manifested in anatomic locations where muscles are enveloped in fasciae. The case of a lower extremity compartment syndrome in a 71-year-old male patient who underwent coronary artery bypass grafting (CABG) and simultaneous aortic valve surgery is reported. Preoperative evaluation revealed severe peripheral vascular disease. The patient underwent triple CABG using the left internal thoracic artery and two vein grafts. The right great saphenous vein was used for these vein grafts. The aortic valve was replaced with a biologic prosthesis. On postoperative day 1, the patient complained of pain and oedema in the right calf. The next day, symptoms worsened, with marked sensory loss, motor weakness and foot drop in the affected limb. Triplex ultrasonography excluded deep vein thrombosis. Compartment syndrome was diagnosed and successfully managed by fasciotomy. This case illustrates that compartment syndrome may, although rarely, be a complication of CABG.

  11. Surgical treatment for ~brain compartment syndrome' in children ...

    African Journals Online (AJOL)

    Objectives. Traumatic brain injury accounts for a high percentage of deaths in children. Raised intracranial pressure (ICP) due to brain swelling within the closed compartment of the skull leads to death or severe neurological disability if not effectively treated. We report our experience with 12 children who presented with ...

  12. Ward Round - Late Presentation of Acute Compartment Syndrome in ...

    African Journals Online (AJOL)

    following the course of ibuprofen mentioned. Twelve days after admission he started to complain of increasing pain and tightness in his left thigh. Sensation and motor function. Ward Round - Late Presentation of Acute. Compartment Syndrome in the Thigh. University of Malawi, College of Medicine, Department of Surgery,.

  13. MEASUREMENT AND MODELLING OF SORPTION EQUILIBRIUM CURVE OF WATER ON PA6, PP, HDPE AND PVC BY USING FLORY-HUGGINS MODEL

    Directory of Open Access Journals (Sweden)

    Suherman Suherman

    2012-02-01

    Full Text Available The sorption of water on granular polyamide-6 (PA6, granular polypropylene (PP, and powdery high density polyethylene (HDPE and powdery polyvinyl chloride (PVC were measured using a gravimetric method in a magnetic suspension balance (MSB. The Flory-Huggins model was successfully applied on the sorption equilibrium curve of all investigated polymers. The influence of temperature is low. The value of Flory-Huggins parameters(c of PA6, PVC, PP and HDPE were 1.8, 5.8, 6.3, and 8.1, respectively. The water in PA6 is mainly bound moisture, while in PP, HDPE and PVC it is mainly surface moisture.

  14. PVC--as flooring material--and its association with incident asthma in a Swedish child cohort study.

    Science.gov (United States)

    Larsson, M; Hägerhed-Engman, L; Kolarik, B; James, P; Lundin, F; Janson, S; Sundell, J; Bornehag, C G

    2010-12-01

    The Dampness in Buildings and Health study (DBH) started in the year 2000 in Värmland, Sweden, with a baseline questionnaire sent to all children (n = 14,077) aged 1-6. Five years later, a follow-up questionnaire was sent to the children who were 1-3 years at baseline. A total of 4779 children participated in both the baseline and the follow-up studies and constitute the study population in this cohort study. The aim of this study was to examine the association between exposure to PVC-flooring in the child's and parent's bedroom in homes of children aged 1-3 and the incidence of asthma, rhinitis, and eczema during the following 5-year period. Adjusted analyses showed that the incidence of asthma among children was associated with PVC-flooring in the child's bedroom (AOR 1.52; 95% CI 0.99-2.35) and in the parent's bedroom (1.46; 0.96-2.23). The found risks were on borderline of significance and should therefore be interpreted with caution. There was further a positive relationship between the number of rooms with PVC-flooring and the cumulative incidence of asthma. PVC-flooring was found to be a stronger risk factor for incident asthma in multifamily homes when compared with single-family houses and in smoking families compared with non-smoking families and in women. These longitudinal data from the DBH study found an association between the presence of PVC-flooring in the home and incident asthma in children. However, earlier results from the DBH study have shown that PVC-flooring is one important source for phthalates in indoor dust, and exposure to such phthalates was found to be associated with asthma and allergy among children. This emphasizes the need for prospective studies that focus on the importance of prenatal and neonatal exposure to phthalates in the development of asthma and allergy in children. © 2010 John Wiley & Sons A/S.

  15. Resistance of particleboard panels made of agricultural residues and bonded with synthetic resins or PVC plastic to wood-rotting fungi

    Directory of Open Access Journals (Sweden)

    Divino Eterno Teixeira

    2009-12-01

    Full Text Available This study aims to evaluate the resistance of three types of particleboard panel to biodeterioration, two of which bonded with synthetic resins and one bonded with PVC plastic. Composite panels were made using sugar cane straw particles as raw material which were bonded together with urea-formaldehyde (UF, tannin-formaldehyde (TANI and PVC plastic (PVC resins. Decay tests were performed following procedures outlined in the ASTM D2017-81/1994 standard, whereby sample specimens were subjected to attack by white rot fungus Trametes versicolor and brown rot fungus Gloeophyllum trabeum using pine (Pinus sp. and embaúba (Cecropia sp. as reference timber. Panels bonded with PVC resin were rated ‘resistant’ to attack by both fungi while those bonded with UF and TANI resins were rated ‘slightly resistant’ to their attack.

  16. Comparative study of three different kinds of geo membranes (PVC-P, HDPE, EPDM) used in the waterproofing of reservoirs; Estudio comparativo de tres geomembranas de distinta naturaleza (PVC-P, PEAD, EPDM) empleadas en la impermeabilizacion de balsas

    Energy Technology Data Exchange (ETDEWEB)

    Blanco Fernandez, M.; Castillo Rubi, F.; Soriano Carrillo, J.; Noval Arango, A. M.; Touze-Foltz, N.; Pargada Iglesias, L.; Rico Arnaiz, G.; Aguilar gonzalez, E.

    2014-02-01

    This work describes the long-term behaviour of three kinds of geo membranes which are constituted by plasticised poly vinyl chloride (PVC-P), high density polyethylene (HDPE) and terpolymer rubber of ethylene-propylene-dienic monomer (EPDM) used as the waterproofing system of the reservoirs Los Llanos de Mesa, San Isidro and El Golfo, respectively. Characteristics of the three original geo membranes and their behaviour along time are presented. Thicknesses, content and nature of the plasticizers ( in PVC-P), tensile properties dynamic and static puncture, fold ability at low temperature, shore hardness, tear resistance and carbon black ( in HDPE), joint strength (shear and peeling test) and microscopy, both optical and electronic scanning tests were carried out. Results obtained conclude with a long-term durability of geo membranes, independently of their macromolecular nature. These characteristics were determined by advanced analytical techniques in PVC-P samples, such as fourier Transform Infrared Spectroscopy (FTIR), Gas Chromatography (GC) and Mass Spectrometry (MS). Spectrometry (MS). (Author)

  17. Specific migration of di-(2-ethylhexyl)adipate (DEHA) from plasticized PVC film: results from an enforcement campaign

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Breindahl, T.

    1998-01-01

    A control campaign on the correct labelling of plasticited PVC film according to current legislation on food contact materials has been performed Analytical methods based on the isotope dilution technique were developed. For enforcement purposes, the films were exposed to the official food simulant...... could be determined by CC-MS without further clean-zip. A good consistency between results from the two different methods was obtained During the campaign, 49 samples of PVC films, the majority intended for use in retail shops, were sampled from importers and wholesalers by the Municipal Food Control....... However, because of the general uncertainty of the analytical method and because the variation in the thickness of the films was calculated to be I mg/dm(2), the action limit in this campaign was 4 mg/cm(2). A migration higher than this action limit was found in 42 films (89% of the samples...

  18. A New Etiology for the Abdominal Compartment Syndrome: Pseudomyxoma Peritonei

    Directory of Open Access Journals (Sweden)

    Charles Sabbagh

    2015-09-01

    Full Text Available Pseudomyxoma peritonei (PMP is a rare diagnosis with an incidence of 1-2 per million. Most cases originate from an appendix which ruptures and releases mucin into the peritoneal cavity. The progression of the disease results in obstruction and cutaneous leak. Abdominal compartment syndrome is an uncommon complication of peritoneal pseudomyxoma. In the present article, we report the case of a patient with PMP and abdominal compartment syndrome. A laparotomy to decrease the abdominal pressure was performed. Three months later, a peritonectomy with hyperthermic intraperitoneal chemotherapy was performed. The patient was still alive 1 year after the procedure without any recurrence. In conclusion, acute abdominal pain and respiratory failure in patients with peritoneal PMP should lead to the measurement of the abdominal pressure but are not a contra indication for curative treatment of PMP.

  19. Air quality inside the passenger compartment of a bus.

    Science.gov (United States)

    Conceição, E Z; Silva, M C; Viegas, D X

    1997-01-01

    The indoor air quality in the passenger compartment of an intercity bus is studied. A system used for the remotion of the contaminants from the compartment, based on an extraction duct, was projected using a simple, unidimensional flow model with capability to predict the air exchange rate as a function of the vehicle velocity. Some tests using tracer gan methods were performed in a real vehicle with the contaminant remotion system mounted, in order to validate the calculation model and evaluate the performances of the system. A good agreement between the predicted and the experimental results was verified and the obtained air exchange rate was quite reasonable when compared with the former situation, without extraction duct.

  20. Bladder distension as a cause of abdominal compartment syndrome

    International Nuclear Information System (INIS)

    Yasir, M.; Hoda, M.Q.

    2018-01-01

    Abdominal compartment syndrome (ACS) is increasingly identified in critically ill patient and its harmful effects are well documented. The disparity among the pressure, volume in abdominal cavity and its contents, results in ACS. The actual incidence of ACS is not known. However, it has been observed predominantly in patients with severe blunt and penetrating abdominal trauma, ruptured abdominal aortic aneurysms, retro- and intra-peritoneal hemorrhage, pneumoperitoneum, neoplasm, pancreatitis, ascites and multiple bone fracture. We present a case of 40-year female who underwent emergency cesarean section and developed abdominal compartment syndrome due to urinary bladder distension secondary to blockade of urinary catheter with blood clots. This is a very unusual cause of ACS. (author)

  1. Bæredygtig erhvervsudvikling. Et debatoplæg om grøn erhvervspolitik med baggrund i historien om PVC

    DEFF Research Database (Denmark)

    Nielsen, V.; Ring, P.; Eriksen, H.

    De danske erfaringer med regulering af PVC diskuteres som et eksempel på virkemidler i grøn erhvervspolitik. Publikationen er udaerbejdet af IDA's ad hoc arbejdsgruppe for bæredygtig udvikling.......De danske erfaringer med regulering af PVC diskuteres som et eksempel på virkemidler i grøn erhvervspolitik. Publikationen er udaerbejdet af IDA's ad hoc arbejdsgruppe for bæredygtig udvikling....

  2. Compartment syndrome after total knee arthroplasty: regarding a clinical case

    Directory of Open Access Journals (Sweden)

    Ana Alexandra da Costa Pinheiro

    2015-08-01

    Full Text Available ABSTRACT Although compartment syndrome is a rare complication of total knee arthroplasty, it is one of the most devastating complications. It is defined as a situation of increased pressure within a closed osteofascial space that impairs the circulation and the functioning of the tissues inside this space, thereby leading to ischemia and tissue dysfunction. Here, a clinical case of a patient who was followed up in orthopedic outpatient consultations due to right gonarthrosis is presented. The patient had a history of arthroscopic meniscectomy and presented knee flexion of 10° before the operation, which consisted of total arthroplasty of the right knee. The operation seemed to be free from intercurrences, but the patient evolved with compartment syndrome of the ipsilateral leg after the operation. Since compartment syndrome is a true surgical emergency, early recognition and treatment of this condition through fasciotomy is crucial in order to avoid amputation, limb dysfunction, kidney failure and death. However, it may be difficult to make the diagnosis and cases may not be recognized if the cause of compartment syndrome is unusual or if the patient is under epidural analgesia and/or peripheral nerve block, which thus camouflages the main warning sign, i.e. disproportional pain. In addition, edema of the limb that underwent the intervention is common after total knee arthroplasty operations. This study presents a review of the literature and signals that the possible rarity of cases is probably due to failure to recognize this condition in a timely manner and to placing these patients in other diagnostic groups that are less likely, such as neuropraxia caused by using a tourniquet or peripheral nerve injury.

  3. Elimination behavior of shelter dogs housed in double compartment kennels.

    Directory of Open Access Journals (Sweden)

    Denae Wagner

    Full Text Available For animals in confinement housing the housing structure has tremendous potential to impact well being. Dogs in animal shelters are often housed in one of two types of confinement housing - single kennels and rooms or double compartment kennels and rooms most often separated by a guillotine door. This study examines the effect of housing on the location of elimination behavior in dogs housed in double compartment kennels were the majority of the dogs were walked daily. One side of the kennel contained the food, water and bed and the other side was empty and available except during cleaning time. Location of urination and defecation was observed daily for 579 dogs housed in indoor double compartment kennels for a total of 4440 days of observation. There were 1856 days (41.9% when no elimination was noted in the kennel. Feces, urine or both were observed in the kennel on 2584 days (58.1%. When elimination occurred in the kennel the probability of fecal elimination on the opposite side of the bed/food/water was 72.5% (95% CI 69.05% to 75.69%. The probability of urination on the opposite side of the bed/food/water was 77.4% (95% CI 74.33% to 80.07%. This study demonstrates the strong preference of dogs to eliminate away from the area where they eat, drink and sleep. Double compartment housing not only allows this - it allows staff the ability to provide safe, efficient, humane daily care and confers the added benefits of reducing risks for disease transmission for the individual dog as well as the population.

  4. Estimation of Water Footprint Compartments in National Wheat Production

    OpenAIRE

    B. Ababaei; H. Ramezani Etedali

    2016-01-01

    Introduction: Water use and pollution have raised to a critical level in many compartments of the world. If humankind is to meet the challenges over the coming fifty years, the agricultural share of water use has to be substantially reduced. In this study, a modern yet simple approach has been proposed through the introduction concept ‘Water Footprint’ (WF). This concept can be used to study the connection between each product and the water allocation to produce that product. This research es...

  5. Acute Compartment Syndrome of the Thigh in Combat Casualties

    Science.gov (United States)

    2013-03-01

    anesthesia (12); (c) internal hemorrhage or fluid extravasation such as coagulopathy and intramuscular hematoma (13, 14), false aneurysm (15), hamstring ...clinical signs and symptoms alone (27, 28). These signs include pain out of proportion, weakness and passive pain on stretch of the muscles in the...thigh. J. Orthop. Trauma 16:436–438, 2002. 6. Rooser, B., Bengtson, S., Hagglund, G. Acute compartment syndrome from anterior thigh muscle contusion: a

  6. Elimination behavior of shelter dogs housed in double compartment kennels.

    Science.gov (United States)

    Wagner, Denae; Newbury, Sandra; Kass, Philip; Hurley, Kate

    2014-01-01

    For animals in confinement housing the housing structure has tremendous potential to impact well being. Dogs in animal shelters are often housed in one of two types of confinement housing - single kennels and rooms or double compartment kennels and rooms most often separated by a guillotine door. This study examines the effect of housing on the location of elimination behavior in dogs housed in double compartment kennels were the majority of the dogs were walked daily. One side of the kennel contained the food, water and bed and the other side was empty and available except during cleaning time. Location of urination and defecation was observed daily for 579 dogs housed in indoor double compartment kennels for a total of 4440 days of observation. There were 1856 days (41.9%) when no elimination was noted in the kennel. Feces, urine or both were observed in the kennel on 2584 days (58.1%). When elimination occurred in the kennel the probability of fecal elimination on the opposite side of the bed/food/water was 72.5% (95% CI 69.05% to 75.69%). The probability of urination on the opposite side of the bed/food/water was 77.4% (95% CI 74.33% to 80.07%). This study demonstrates the strong preference of dogs to eliminate away from the area where they eat, drink and sleep. Double compartment housing not only allows this - it allows staff the ability to provide safe, efficient, humane daily care and confers the added benefits of reducing risks for disease transmission for the individual dog as well as the population.

  7. Compartment Syndrome Following Directly Repair of Hernia of Anterior Tibialis

    Directory of Open Access Journals (Sweden)

    Yuan-Ta Li

    2015-01-01

    Full Text Available We present a case of a patient with hernia of anterior tibialis who was treated operatively. Muscle herniation through a fascial defect is rare, which requires repair of fascial defects. We performed a simple closure of fascial defect. A fasciotomy was proceeded to complication of acute compartment syndrome developed after the operation. The sequelae as weakness of dorsiflexion of ankle and big toe were present.

  8. Infusoabdomen with abdominal compartment in extremely low birth weight neonates

    Directory of Open Access Journals (Sweden)

    Armin-Johannes Michel

    2016-03-01

    Full Text Available Central venous catheters (CVCs are frequently used in neonatal care. The rate of complications upon CVC use is high and the spectrum ranges from catheter tip dislocation to cardiac tamponade and death. Here we present an explanation model to the phenomenon of paravasate into human anatomical cavities based on two illustrative cases: Extremely low birth weight twins suffering from abdominal compartment syndromes due to different pathologies – one with a trans-peritoneal and one with intra-abdominal effusion. In both siblings the peripherally introduced central catheter (PICC perforated the vessel without clinical signs of bleeding and contributed to abdominal and thoracal complications. Case I (23 + 5 gestational week; 770 g; female showed clinical signs of an abdominal compartment syndrome without respective intestinal pathology upon open surgical procedure with ileostomy. Radiographic contrast examination showed retroperitoneal leakage when administered through the catheter. Replacement into the subclavian vein led to cardio-respiratory misbalance due to severe pleural effusion. Re-replacement finally led to clinical restitution after 60 days of intensive care. Case II (23 + 5 gestational week; 690 g; female showed clinical signs of an abdominal compartment syndrome, too. Radiographic contrast examination showed leakage from the PICC into the abdomen. Replacement of the PICC and invasive care led to improvement after 3 days. The 2 cases reveal that the displacement of a PICC can occur without direct clinical signs of hemodynamic imbalance i.e. bleeding or hematoma. Displacement of the catheter tip from intra-vascular, retro-peritoneal position can cause abdominal compartment syndromes either via trans-peritoneal migration of fluids or after perforation of the peritoneum via intra-abdominal administration of given infusion. Both options caused life threatening complications. Watchfulness and intensive surgical and non-surgical care are

  9. The statolith compartment in Chara rhizoids contains carbohydrate and protein

    Science.gov (United States)

    Wang-Cahill, F.; Kiss, J. Z.

    1995-01-01

    In contrast to higher plants, the alga Chara has rhizoids with single membrane-bound compartments that function as statoliths in gravity perception. Previous work has demonstrated that these statoliths contain barium sulfate crystals. In this study, we show that statoliths in Chara rhizoids react with a Coomassie Brilliant Blue cytochemical stain for proteins. While statoliths did not react with silver methenamine carbohydrate cytochemistry, the monoclonal antibody CCRC-M2, which is against a carbohydrate (sycamore-maple rhamnogalacturonan I), labeled the statolith compartment. These results demonstrate that in addition to barium sulfate, statoliths in Chara rhizoids have an organic matrix that consists of protein and carbohydrate moieties. Since the statoliths were silver methenamine negative, the carbohydrate in this compartment could be a 3-linked polysaccharide. CCRC-M2 also labeled Golgi cisternae, Golgi-associated vesicles, apical vesicles, and cell walls in the rhizoids. The specificity of CCRC-M2 immunolabeling was verified by several control experiments, including the demonstration that labeling was abolished when the antibody was preabsorbed with its antigen. Since in this and a previous study (John Z. Kiss and L. Andrew Staehelin, American Journal of Botany 80: 273-282, 1993) antibodies against higher plant carbohydrates crossreacted with cell walls of Chara in a specific manner, Characean algae may be a useful model system in biochemical and molecular studies of cell walls.

  10. Chronic Exertional Compartment Syndrome in a High School Soccer Player

    Directory of Open Access Journals (Sweden)

    James J. Bresnahan

    2015-01-01

    Full Text Available Chronic exertional compartment syndrome (CECS is a relatively rare condition that affects young adult athletes and often causes them to present to the emergency department. If left untreated, those who continue to compete at high levels may experience debilitating leg pain. Physicians may have difficulty differentiating CECS from other syndromes of the lower leg such as medial tibial stress syndrome, stress fractures, and popliteal artery entrapment. The gold standard for diagnosing CECS is intramuscular compartment pressure monitoring before and/or after 10 minutes of exercise. Some patients may choose to stop participation in sports in order to relieve their pain, which otherwise does not respond well to nonoperative treatments. In patients who wish to continue to participate in sports and live an active life, fasciotomy provides relief in 80% or more. The typical athlete can return to training in about 8 weeks. This is a case of a high school soccer player who stopped competing due to chronic exertional compartment syndrome. She had a fascial hernia, resting intramuscular pressure of 30 mmHg, and postexercise intramuscular pressure of 99 mmHg. Following fasciotomy she experienced considerable life improvement and is once again training and playing soccer without symptoms.

  11. Engineered protein nano-compartments for targeted enzyme localization.

    Directory of Open Access Journals (Sweden)

    Swati Choudhary

    Full Text Available Compartmentalized co-localization of enzymes and their substrates represents an attractive approach for multi-enzymatic synthesis in engineered cells and biocatalysis. Sequestration of enzymes and substrates would greatly increase reaction efficiency while also protecting engineered host cells from potentially toxic reaction intermediates. Several bacteria form protein-based polyhedral microcompartments which sequester functionally related enzymes and regulate their access to substrates and other small metabolites. Such bacterial microcompartments may be engineered into protein-based nano-bioreactors, provided that they can be assembled in a non-native host cell, and that heterologous enzymes and substrates can be targeted into the engineered compartments. Here, we report that recombinant expression of Salmonella enterica ethanolamine utilization (eut bacterial microcompartment shell proteins in E. coli results in the formation of polyhedral protein shells. Purified recombinant shells are morphologically similar to the native Eut microcompartments purified from S. enterica. Surprisingly, recombinant expression of only one of the shell proteins (EutS is sufficient and necessary for creating properly delimited compartments. Co-expression with EutS also facilitates the encapsulation of EGFP fused with a putative Eut shell-targeting signal sequence. We also demonstrate the functional localization of a heterologous enzyme (β-galactosidase targeted to the recombinant shells. Together our results provide proof-of-concept for the engineering of protein nano-compartments for biosynthesis and biocatalysis.

  12. Chronic Exertional Compartment Syndrome in a High School Soccer Player.

    Science.gov (United States)

    Bresnahan, James J; Hennrikus, William L

    2015-01-01

    Chronic exertional compartment syndrome (CECS) is a relatively rare condition that affects young adult athletes and often causes them to present to the emergency department. If left untreated, those who continue to compete at high levels may experience debilitating leg pain. Physicians may have difficulty differentiating CECS from other syndromes of the lower leg such as medial tibial stress syndrome, stress fractures, and popliteal artery entrapment. The gold standard for diagnosing CECS is intramuscular compartment pressure monitoring before and/or after 10 minutes of exercise. Some patients may choose to stop participation in sports in order to relieve their pain, which otherwise does not respond well to nonoperative treatments. In patients who wish to continue to participate in sports and live an active life, fasciotomy provides relief in 80% or more. The typical athlete can return to training in about 8 weeks. This is a case of a high school soccer player who stopped competing due to chronic exertional compartment syndrome. She had a fascial hernia, resting intramuscular pressure of 30 mmHg, and postexercise intramuscular pressure of 99 mmHg. Following fasciotomy she experienced considerable life improvement and is once again training and playing soccer without symptoms.

  13. Digital Microscopy Assessment of Angiogenesis in Different Breast Cancer Compartments

    Directory of Open Access Journals (Sweden)

    Anca Haisan

    2013-01-01

    Full Text Available Background/Aim. Tumour angiogenesis defined by microvessel density (MVD is generally accepted as a prognostic factor in breast cancer. However, due to variability of measurement systems and cutoffs, it is questionable to date whether it contributes to predictive outline. Our study aims to grade vascular heterogeneity by comparing clear-cut compartments: tumour associated stroma (TAS, tumour parenchyma, and tumour invasive front. Material and Methods. Computerized vessel area measurement was performed using a tissue cytometry system (TissueFAXS on slides originated from 50 patients with breast cancer. Vessels were marked using immunohistochemistry with CD34. Regions of interest were manually defined for each tumour compartment. Results. Tumour invasive front vascular endothelia area was 2.15 times higher than that in tumour parenchyma and 4.61 times higher than that in TAS (P<0.002. Worth to mention that the lymph node negative subgroup of patients show a slight but constant increase of vessel index in all examined compartments of breast tumour. Conclusion. Whole slide digital examination and region of interest (ROI analysis are a valuable tool in scoring angiogenesis markers and disclosing their prognostic capacity. Our study reveals compartments’ variability of vessel density inside the tumour and highlights the propensity of invasive front to associate an active process of angiogenesis with potential implications in adjuvant therapy.

  14. 75 FR 81 - Special Conditions: Boeing Model 787-8 Airplane; Overhead Flightcrew Rest Compartment Occupiable...

    Science.gov (United States)

    2010-01-04

    ... these regulations. The two OFCR compartment seats are only a couple of steps away from the stairway and... incapacitated person (representative of a ninety-fifth percentile male) from the OFCR compartment to the...

  15. Endocytosis of desmosomal plaques depends on intact actin filaments and leads to a nondegradative compartment

    DEFF Research Database (Denmark)

    Holm, Pernille K.; Hansen, Steen H.; Sandvig, Kirsten

    1993-01-01

    Cellebiologi, human epithelial cell line, growth inhibition, desmosomes, clathrin-independent endocytosis, cytoskeleton, nondegradative compartment......Cellebiologi, human epithelial cell line, growth inhibition, desmosomes, clathrin-independent endocytosis, cytoskeleton, nondegradative compartment...

  16. Ultrasonic-assisted biosurface modification of multi-walled carbon nanotubes with Thiamine and its influence on the properties of PVC/Tm-MWCNTs nanocomposite films.

    Science.gov (United States)

    Mallakpour, Shadpour; Abdolmaleki, Amir; Azimi, Faezeh

    2017-11-01

    The present paper represents a simple and efficient technique via ultrasonic irradiation, which utilized for chemical treatment of carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) with Thiamine (Tm). Poly(vinyl chloride) (PVC) based nanocomposites (NC)s were prepared by the incorporation of various amounts of modified MWCNTs (4, 8, and 12wt%) within the PVC matrix by blending solution and ultrasonic distribution methods. The morphological, chemical structure and thermal stability of the PVC/Tm-MWCNT NCs were identified via Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, and thermogravimetric analysis. The obtained results of thermal behavior indicated the high thermal stability of PVC/Tm-MWCNT NCs in comparison with the pure PVC via presenting diverse quantities of Tm-MWCNTs. In addition, the mechanical behavior of the PVC/Tm-MWCNT NCs films was examined and the results exhibited that mechanical properties of fabricated NCs were improved. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Sustainable and Selective Separation of PVC and ABS from a WEEE Plastic Mixture Using Microwave and/or Mild-Heat Treatment with Froth Flotation.

    Science.gov (United States)

    Thanh Truc, Nguyen Thi; Lee, Byeong-Kyu

    2016-10-04

    This study reports simple, selective, and sustainable separation of chlorinated plastic (polyvinyl chloride, PVC) and acrylonitrile butadiene styrene (ABS) containing brominated flame retardants (BFRs) from mixed waste electrical and electronic equipment (WEEE) plastics using microwave and/or mild-heat treatment. Microwave treatment after plastic coating with powdered activated carbon (PAC) selectively increased the hydrophilicity of the PVC surface, which facilitated PVC separation (100% recovery and purity) from the WEEE plastic mixture under the optimum flotation conditions. A further mild-heat treatment for 100 s facilitated selective separation with the highest recovery and purity (100%) of PAC-coated ABS containing BFRs from the remaining plastic mixture due to selective formation of a twisted structure with a lower density than water and the untreated ABS. Mild-heat treatment only of PAC-coated WEEE plastic mixture resulted in successful recovery of (100%) the ABS and PVC. However, the recovered PVC had slightly reduced purity (96.8%) as compared to that obtained using the combined heat and microwave treatments. The combination of both treatments with flotation facilitated selective and sustainable separation of PVC and ABS from WEEE plastics to improve their recycling quality.

  18. Simple and fast preparation of graphene oxide@ melamine terephthaldehyde and its PVC nanocomposite via ultrasonic irradiation: Chemical and thermal resistance study.

    Science.gov (United States)

    Khaleghi, Mahroo; Didehban, Khadijeh; Shabanian, Meisam

    2018-05-01

    Melamine terephthaldehyde modified graphene oxide (MTR-GO) with optimum content was easily prepared via ultrasonication method and used as anti-corrosion additive for Poly (vinyl chloride) (PVC). The effects of ultrasonicated MTR-GO on the mechanical, chemical and thermal resistance of the PVC were thoroughly studied. Change percentage of tensile strength and weight change percentage of PVC (P) and PVC/MTR-GO nanocomposite (PN) in acetone and sodium hypochlorite (NaClO) media at two different exposure temperature (20 °C and 50 °C) were examined. The PN sample showed lower change loss percentage of tensile strength in acetone uptake as compared with P sample at 20 °C. In higher temperature (50 °C), P sample was decomposed while PN still showed tensile data. The change loss percentage in tensile strength of PN sample showed 13% change at 50 °C in sodium hypochlorite while P sample showed 63% change for the parameter. Protective behavior of MTR-GO nanofiller on PVC matrix against thermal HCl releasing was investigated by Congo red tests. The results showed that the nanocomposite release less amount of HCl as compare to the neat PVC. Copyright © 2017. Published by Elsevier B.V.

  19. Preparation and testing of a solid secondary plasticizer for PVC produced by chemical degradation of post-consumer PET.

    Science.gov (United States)

    Amaro, Lucía Pérez; Coiai, Serena; Ciardelli, Francesco; Passaglia, Elisa

    2015-12-01

    Post-consumer poly(ethylene therephthalate) (PET) obtained from milled water bottles was chemically degraded by glycolysis, using suitable amounts of diethylene glycol (DEG) and Ca/Zn stearate as catalyst system. The process was carried out by employing a melt mixer as the chemical reactor, which is the facility generally used for plastic compounding. The degraded PET products were first characterized from structural and thermal point of view by Fourier transform infrared spectroscopy (FTIR), Proton nuclear magnetic resonance ((1)H NMR), Size exclusion chromatography (SEC) Differential scanning calorimetry (DSC) and Thermogravimetric analysis (TGA), and thereafter used alone or together with di(2-ethylhexyl) phthalate (DEHP) in poly(vinyl chloride) PVC formulations. The plasticization was, in fact, accomplished by using a binary system consisting of DEHP as primary plasticizer and a degraded PET product as secondary plasticizer (SP). The obtained materials were characterized through the main methods used to assess flexible PVC compounds: hardness in Shore A scale, thermal properties and quantitative migration of the plasticizer. The solid secondary plasticizer obtained from post-consumer PET improves both the processing characteristics and the thermal stability of the final flexible PVC compounds while maintaining their hardness within the top values of the Shore A scale. In addition, a considerable reduction of the plasticizers migration (23%) was obtained by optimizing the formulation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Immobilization of ionophore and surface characterization studies of the titanium(III) ion in a PVC-membrane sensor.

    Science.gov (United States)

    Rezayi, Majid; Heng, Lee Yook; Kassim, Anuar; Ahmadzadeh, Saeid; Abdollahi, Yadollah; Jahangirian, Hossein

    2012-01-01

    Novel ionophores comprising various hydroxide and amine structures were immobilized onto poly(vinyl chloride) (PVC) matrices, and these were examined to determine Ti(III) selectivity. To predict the selectivity of Ti(III), a PVC membrane was used to investigate the binding of Ti(III) to c-methylcalix[4]resorcinarene (CMCR). The study showed that the chelating ligand, CMCR, was coordinated selectively to Ti(III) at eight coordination sites involving the oxygen atoms at the interface of the membrane/solution. The membrane was prepared, based on CMCR as an ionophore, sodium tetrakis(4-fluorophenyl) borate (NaTFPB) as a lipophilic ionic additive, and dioctylphthalate (DOP) as a plasticizer. The immobilization of the ionophore and surface characterization studies revealed that the performance of CMCR-immobilized PVC was equivalent to that of mobile ionophores in supported liquid membranes (SLMs). The strengths of the ion-ionophore (CMCR-Ti(OH)(OH(2))(5) (2+)) interactions and the role of ionophores on membranes were studied via UV-Vis, Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and and X-ray diffraction (XRD).

  1. Molecular analysis of long-term biofilm formation on PVC and cast iron surfaces in drinking water distribution system.

    Science.gov (United States)

    Liu, Ruyin; Zhu, Junge; Yu, Zhisheng; Joshi, DevRaj; Zhang, Hongxun; Lin, Wenfang; Yang, Min

    2014-04-01

    To understand the impacts of different plumbing materials on long-term biofilm formation in water supply system, we analyzed microbial community compositions in the bulk water and biofilms on faucets with two different materials-polyvinyl chloride (PVC) and cast iron, which have been frequently used for more than10 years. Pyrosequencing was employed to describe both bacterial and eukaryotic microbial compositions. Bacterial communities in the bulk water and biofilm samples were significantly different from each other. Specific bacterial populations colonized on the surface of different materials. Hyphomicrobia and corrosion associated bacteria, such as Acidithiobacillus spp., Aquabacterium spp., Limnobacter thiooxidans, and Thiocapsa spp., were the most dominant bacteria identified in the PVC and cast iron biofilms, respectively, suggesting that bacterial colonization on the material surfaces was selective. Mycobacteria and Legionella spp. were common potential pathogenic bacteria occurred in the biofilm samples, but their abundance was different in the two biofilm bacterial communities. In contrast, the biofilm samples showed more similar eukaryotic communities than the bulk water. Notably, potential pathogenic fungi, i.e., Aspergillus spp. and Candida parapsilosis, occurred in similar abundance in both biofilms. These results indicated that microbial community, especially bacterial composition was remarkably affected by the different pipe materials (PVC and cast iron). Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  2. Detection of active noise control on the standard motorcycle exhaust Supra X 125 D using PVC pipe technique form Y

    Science.gov (United States)

    Isranuri, I.; Alfisyahrin; Nasution, A. R.

    2018-02-01

    This detection aims to obtain noise reduction on the supra X 125D motorcycle exhaust by using the Active Noise Control Method. The technique is done using a Y-shaped PVC pipe to be bolted on the exhaust, which then branch Y PVC is placed loudspeaker with impermeable conditions. The function of this loudspeaker is as a secondary noise to counter the primary noise of the sound of exhaust motorcycle Supra X 125D. The sound generator in this study is the ISD 4004 module, which serves to generate noise to counter the source noise. How this ISD 4004 module works is by recording source noise then recording the source noise and then reversed the phase 180° by phase reversing circuit. So that, the noise generated by the sound generator will hit the source noise and encounter or such as addition of two different phase of sound will result in noise reduction when detected at the end of the Y-shaped PVC pipe. Inverted phase reversed using feed-back resistor 1 kΩ and 2 kΩ input resistors, 16V capacitor 2500μf and as amplifier using ICL 7660 and TL 702 CP. Test results on the highest 1000 rpm rotation engine speed on the Z axis of 2 dB, and at the highest 2000 rpm rotation engine speed also occurs on the Z axis of 1.5 dB.

  3. PVC cling film in contact with cheese: health aspects related to global migration and specific migration of DEHA

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Naamansen, Ebbe Tubæk; Nielsen, Preben Aagård

    1995-01-01

    Following exposure to the food simulant olive oil for 10 days at 5, 20 or 40 degrees C a global migration ranging from 20 to 30 mg/dm(2) was detected from a common 'low migration' PVC film plasticized with a mixture of di-(ethylhexyl)adipate (DEHA) and a polymeric plasticizer. In a laboratory...... experiment samples of cheese of the types most commonly consumed in Denmark were wrapped in this 'low migration' PVC film using a procedure simulating the actual pattern of use in retail shops. After a storage time of 2 h at 5 degrees C the level of DEHA was 45 mg/kg of cheese, which after 10 days increased...... to 150 mg DEHA per kg of cheese, corresponding to an estimated specific migration of 12 mg DEHA/dm(2) of cheese surface. Based on statistics on dietary habits it is concluded that the retail packaging of small portions of cheese even in a 'low migration' PVC cling film may lead to consumer intakes...

  4. Desenvolvimento de PVC reforçado com resíduos de Pinus para substituir madeira convencional em diversas aplicações Development of PVC/wood composites for the replacement of conventional wood products

    Directory of Open Access Journals (Sweden)

    Antonio Rodolfo Jr.

    2006-03-01

    Full Text Available Este trabalho avalia a viabilidade técnica da obtenção de compósitos lignocelulósicos de PVC, utilizando-se resíduo de Pinus elliottii e Pinus taeda como carga reforçativa. Foi desenvolvido um processo simples e economicamente viável de tratamento de resíduos industriais desta madeira, processo este baseado na secagem e revestimento das partículas com lubrificantes funcionais e agentes de acoplamento utilizados como aditivos na indústria do PVC, bem como no uso de equipamentos tradicionais da indústria de processamento deste termoplástico. Foram avaliados os efeitos da incorporação da farinha de madeira em concentrações variáveis e do tipo de agente de tratamento superficial utilizado na processabilidade do composto de PVC, bem como em propriedades finais do compósito. Os resultados mostram que o desenvolvimento deste tipo de material compósito é uma alternativa viável para a substituição da madeira convencional em diversas aplicações.This work evaluates the technical viability of lignocellulosic vinyl composites, using residues of Pinus elliottii and Pinus taeda as the reinforcement fiber. A simple and economically viable process for the treatment of these industrial residues was developed. The process includes sieving, drying and treating the wood particles. Treatment is made with functional lubricants and coupling agents used as additives in the PVC industry. Extrusion was performed using traditional equipment available in the Brazilian PVC processing industry. The effect on the processability of the variable concentrations of the residues incorporated and the type of agent used for the treatment had been evaluated, as well as in the final properties of the composite. The results show that the development of this kind of composite material is a viable alternative for the substitution of conventional wood in diverse applications.

  5. Carneiro hidráulico com tubulação de alimentação em aço galvanizado e em PVC Hydraulic ram pump perfomance with PVC and steel pipes

    Directory of Open Access Journals (Sweden)

    Caroline Abate

    2002-03-01

    Full Text Available A recente crise da energia convencional tem ocasionado a exploração de fontes alternativas de energia. O bombeamento de água utilizando carneiro hidráulico é amplamente empregado em propriedades onde a energia elétrica é escassa ou inexistente. Procurando dar subsídios técnicos para a utilização do PVC nos sistemas de alimentação de um carneiro hidráulico, foi desenvolvido um experimento com objetivo de avaliar o desempenho de um carneiro hidráulico quando alimentado por uma tubulação de PVC e outra de aço galvanizado, sob três alturas de queda (2,1, 3,8 e 4,7 m. Foi utilizada a equação de D'Aubussion's para a avaliação do rendimento, calculado a partir de leituras de altura de recalque, vazão de escape, vazão de recalque e altura de alimentação. Pode-se conseguir o máximo rendimento com o carneiro hidráulico utilizando-se de tubulação de PVC com até 4,2 m de desnível; além desse valor a tubulação de aço galvanizado é mais eficiente.The recent conventional energy crisis is leading to the exploration of alternative energy sources. The pumping of water using ram pumps is widely used in farms where electric energy is scarce or inexistent. This experiment was carried out to evaluate the performance of an hydraulic ram pump utilizing two kinds of supply pipes (PVC and steel using three different supply heads (2.1, 3.8 and 4.7. Delivery head, delivery discharge, waste discharge and supply head were utilized to calculate the yield of the hydraulic ram by the equation of D'Aubussion. The maximum yield of the hydraulic ram was obtained for the PVC pipe for the 4.2 m head; for heads higher than 4.2 m the steel pipe was more efficient.

  6. Co-occurrence of invasive Cuban Treefrogs and native treefrogs in PVC pipe refugia

    Science.gov (United States)

    Elston, Laura M.; Waddle, J. Hardin; Rice, Kenneth G.; Percival, H. Franklin

    2013-01-01

    The Cuban Treefrog (Osteopilus septentrionalis) was first introduced to Florida at Key West. Since this introduction, Cuban Treefrogs have spread to Miami and are now established throughout most of peninsular Florida. Cuban Treefrogs can become very abundant in areas they colonize. Several reasons contribute to their success, including a generalist diet, high fecundity and the ability to reproduce year-round, and use of disturbed or human-modified habitats. Scientists and managers are concerned that Cuban Treefrogs may contribute to the decline of native treefrogs. Cuban Treefrogs may exclude native treefrogs through both competition and predation. Because the evidence from our study and others suggests that Green and Squirrel Treefrogs do not alter their behavior to avoid Cuban Treefrogs, there is cause for concern that sampling with PVC pipes may increase the vulnerability of the native species to predation. This possibility needs further research, including whether other species of native treefrogs sympatric to where Cuban Treefrogs have invaded are also naïve to the possible threat posed by these frogs, and also if native treefrogs eventually learn to avoid Cuban Treefrogs.

  7. Positron irradiation effect on positronium formation in gamma-irradiated LDPE and unplasticized PVC

    Science.gov (United States)

    Yang, J.; Zang, P.; Cao, X. Z.; Yu, R. S.; Wang, B. Y.

    2017-06-01

    Positron irradiation effects on positronium formation in low-density polyethylene (LDPE), gamma-irradiated LDPE and unplasticized PVC (UPVC) are studied. At least in one of the three different measurements, i.e., prolonged positron annihilation measurement at room temperature, low temperature in darkness and subsequent measurement under light, changes in o-Ps intensity are observed in non-irradiated LDPE and gamma-irradiated LDPE. While in UPVC, change in o-Ps intensity is hardly observable in all the above-mentioned three measurements. Reduction of o-Ps intensity by light indicates that positronium formation via the recombination of a positron and a trapped electron exists in LDPE and gamma-irradiated LDPE. The absence of light bleaching effect, together with the fact that the value of o-Ps intensity in heating and cooling process of a thermal circle is nearly the same, indicates that in UPVC, positronium can not be formed through trapped electron mechanism. This study highlights the speciality of positronium formation in UPVC, positronium is formed exclusively by the recombination of electron-positron pairs with short separations.

  8. Effect of blending temperature on the mechanical properties of PVC/ENR blend upon irradiation

    International Nuclear Information System (INIS)

    Chantara Thevy Ratnam; Khairul Zaman Mohd Dahlan; Nasir, M.; Baharin, A.

    2000-01-01

    Poly (vinyl chloride) / epoxidized natural rubber blends were prepared with a Brabender plasticorder at 140, 150, 160, 170 and 180 degree C mixing temperatures. They were mixed at 50 rpm rotor speed for 10 min. The blends were irradiated with doses ranging from 0-200 kGy. Changes in tensile strength, modulus at 100% elongation, gel fraction and damping properties (tan δ) of the blends with increasing mixing temperatures and irradiation doses were investigated. In general, it was observed that the mixing temperature is important in maximizing the positive effect of irradiation. Results revealed that a readily miscible blend enjoy maximum benefit from irradiation meanwhile irradiation impart miscibility to a partially miscible PVC/ENR blend. The enhancement in blend properties is believed to be attributed by the irradiation-induced crosslinking along with irradiation-induced interaction between the polymers. The radiation-induced degradation found to be prominent at higher doses for blend that has undergone excessive thermal degradation. However evidence did not reveal the specific nature of radiation-induced reaction responsible for the improved interactions of the blends. (author)

  9. PVC-based synthetic leather to provide more comfortable and sustainable vehicles

    Science.gov (United States)

    Maia, I.; Santos, J.; Abreu, MJ; Miranda, T.; Carneiro, N.; Soares, GMB

    2017-10-01

    Consumers are increasingly demanding the interior of cars to be comfortable even in the case of more economic commercial segments. Thus, the development of materials with thermoregulation properties has assumed renewed interest for these particular applications. An attempt has been made to prepare a multilayer PVC-based synthetic leather with paraffinic PCMs to be applied on a car seat. The thermal behaviour of the material was analysed using Alambeta apparatus, a thermo-camera and a thermal manikin. The results obtained show that the synthetic leather with incorporated PCMs gives cooler feeling and has higher reaction times regarding environmental temperature variations than the material without PCMs incorporation. Globally, the new designed material allowed greater thermal comfort to the cars´ inhabitants. In addition, the material quality was evaluated according to the standard of the customer, BMW 9,210,275; Edition / Version 4, 2010-10-01 revealing that the material meets all the requirements under test, except for the performance in terms of flexibility.

  10. The Politics of PVC: Technology and Institutions in Upland Water Management in Northern Thailand

    Directory of Open Access Journals (Sweden)

    Nathan Badenoch

    2009-06-01

    Full Text Available Conflict over water has grown in the mountainous areas of Thailand since the replacement of opium with alternative crops. PVC-sprinkler irrigation has enabled dry-season expansion of these cash crops on sloping lands, intensifying demand for water when it is most scarce. The technology and institutions that form the backbone of these irrigation systems have evolved simultaneously in a process of adaptive governance, in which local farmers draw on local social resources to balance competition and cooperation. Common conceptions of upstream – downstream conflict, pitting Thai against ethnic minorities in a struggle for resources, dominate the discourse of watersheds in Thailand. Upland water users themselves are diverse and their resource management systems are dynamic, even if they are not recognised as legitimate users of water. Understanding how upland communities create local systems of resource governance through dry-season irrigation is highly relevant for governance at higher levels, such as in the efforts to establish watershed networks and river basin organisations.

  11. Investigation of the Optical Properties of Flexopraphic Prints on PVC and PET films

    Directory of Open Access Journals (Sweden)

    Jana Valauskaitė

    2017-01-01

    Full Text Available An optical properties of the flexographic prints on the shrink sleeve has been experimentally investigated. Two main materials of shrink sleeve: PVC and PET were used for the research. Films were printed using UV flexographic inks. The color changes arised during shrinking of the films were analysed. Investigations were done using CMYK and PANTONE color matching systems. Color characteristics CIE L*a*b* and color difference E at different shrink level of the film was estimated. It was found that colors become darker during the shrinking of the film. In the case of rasterize image it is related to the deformation of the raster dots, decrease of the spaces between the raster dots and other factors. The biggest changes in the CMYK color system was determined in the Yellow color, while in the tested PANTONE color system – in the blue (P 290 color. The smallest changes in the CMYK color system was determined in the Cyan color, while in the PANTONE color system – in the white color.

  12. Mg(II Selective PVC Membrane Electrode Based on Methyl Phenyl Semicarbazone as an Ionophore

    Directory of Open Access Journals (Sweden)

    Sulekh Chandra

    2013-01-01

    Full Text Available A PVC-membrane-based Mg(II selective electrode was constructed using methyl phenyl semicarbazone (MPS as a neutral carrier. The sensor exhibits a Nernstian response for Mg(II ion over a wide concentration range 1.0×10-8  to  1.0×10-1 M with the slope of 28.4 mV/per decade having detection limit 1.7×10-9 M. It was relatively a fast response time (<10 s for concentration ≥1.0×10-3 and <15 s for concentration of ≥1.0×10-6 M and can be used for 8 months without any considerable divergence in potentials. The proposed sensor revealed relatively good selectivity and high sensitivity for Mg(II over a mono-, di-, and trivalent cation and can be used in a pH range of 1.0–9.5. It was also successfully used as an indicator electrode in potentiometer titration and in the analysis of concentration of magnesium in various real samples.

  13. Novel PVC-membrane electrode for flow injection potentiometric determination of Biperiden in pharmaceutical preparations.

    Science.gov (United States)

    Khaled, Elmorsy; El-Sabbagh, Inas A; El-Kholy, N G; Ghahni, E Y Abdel

    2011-12-15

    The construction and performance characteristics of Biperiden (BP) polyvinyl chloride (PVC) electrodes are described. Different methods for electrode fabrication are tested including; incorporation of BP-ion pairs (BP-IPs), incorporation of ion pairing agents, or soaking the plain electrode in BP-ion pairs suspension solution. Electrode matrices were optimized referring to the effect of modifier content and nature, plasticizer and the method of modification. The proposed electrodes work satisfactorily in the BP concentration range from 10(-5) to 10(-2)mol L(-1), with fast response time (7s) and adequate operational lifetime (28 days). The electrode potential is pH independent within the range 2.0-7.0, with good selectivity towards BP in presence of various interfering species. The developed electrodes have been applied for potentiometric determination of BP in pharmaceutical formulation under batch and flow injection analysis (FIA) conditions. FIA offers the advantages of accuracy and automation feasibility with high sampling frequency. The dissolution profile for Akineton tablets (2mg BP/tablet) was studied using the proposed electrode in comparison with the official methods. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. Neodymium(III PVC Membrane Electrodchemical Sensor Based on N-benzoylethylidene-2-aminobenzylamine

    Directory of Open Access Journals (Sweden)

    Hassan Ali Zamani

    2012-01-01

    Full Text Available The N-benzoylethylidene-2-aminobenzylamine (BEA was used as a suitable ionophore in construction of neodymium ion selective electrode. The electrode with composition of 30% PVC, 58% solvent mediator (NB, 2% ionophore (BEA and 10% anionic additive (OA shows the best potentiometric response characteristics. The Nd3+ sensor exhibits a Nernstian slope of 21.2 ± 0.2 mV decade-1 over the concentration range of 1.0 × 10-6 to 1.0 × 10-2 mol L-1, and a detection limit of 6.3 × 10-7 mol L-1 of Nd3+ ions. The potentiometric response of the sensor is independent of the solution pH in the range of 2.4–8.5. It has a very short response time, in the whole concentration range (~7 s, and can be used for at least eight weeks. The proposed sensor revealed high selectivity with respect to all common alkali, alkaline earth, transition and heavy metal ions, including members of the lanthanide family other than Nd3+. The Nd3+ sensor was successfully applied as an indicator electrode in the potentiometric titration of Nd3+ ions with EDTA. The electrode was also employed for the determination of the fluoride ion in two mouth wash preparations.

  15. A lutetium PVC membrane sensor based on (2-oxo-1,2--diphenylethylidene-N-phenylhydrazinecarbothioamide

    Directory of Open Access Journals (Sweden)

    HASSAN ALI ZAMANI

    2011-09-01

    Full Text Available Based on the former experience on the design and construction of metal ions sensors, especially those of high sensitivity for lanthanides, (2-oxo-1,2-diphenylethylidene-N-phenylhydrazinecarbothioamide (PHCT was used to construct a Lu3+ PVC sensor exhibiting a Nernstian slope of 19.8±0.3 mV dec-1. The sensor was found to function well over a concentration range of 1.0×10-2 and 1.0×10-6 mol L-1 of the target ion with a detection limit of 6.8×10-7 mol L-1. The sensor selectivity against many common alkaline, alkaline earth, transition, heavy metals and specially lanthanide ions was very good and it functioned well in the pH range 2.5–8.7. Having a lifetime of at least 2 months and a short response time of ≈ 5 s, the sensor was successfully used as an indicator electrode in the potentiometric titration of Lu3+.

  16. A study on the improvement of radiation-induced oxidation resistance for polypropylene and PVC materials

    International Nuclear Information System (INIS)

    Park, K. Z.; Jeong, K. S.; Cho, S. H.; Cho, Y. H.; Seok, H. C.

    2002-01-01

    The object of this project is to improve the stability and the economics by reducing the radiation-induced oxidation as a factor of degradation of polymer materials used under the radiation environment. In order to attain the objective of this study and to check the effect of diamond-like carbon (DLC) coating on the anti-oxidation reaction, polymer specimens such as Polyproplyene, PVC coating DLC thin layer were exposed to high level gamma radiation, and their irradiation effects were investigated. A plasma-enhanced chemical vapor deposition method was adopted in fabricating a DLC thin film on the polymer specimens, which were irradiated with the non-DLC film deposited specimens under the gamma radiation emitted from Co-60 source from 1 x 10 5 to 1 x 10 8 rads exposure. According to the characterization of irradiated specimens from the elapsed time of minimum 4 hours to a maximum of 105 days after the irradiation, the DLC deposition on the polymer surface was revealed to contribute to the improvement on the resistance of the radiation-induced oxidation in this study

  17. Study of the degradation of the insulation of HV cables with PVC insulation

    International Nuclear Information System (INIS)

    Quennehen, Pierre

    2014-01-01

    The observed decrease in the resistivity of the PVC insulation of some high voltage unipolar cables led to question their ability to perform their function. Provide answers concerning in particular the origin of the variation in resistivity and the impact on the dielectric strength were the objectives of this study. The characterizations were carried on cables withdrawn from service whose properties had changed during their use. Physico-chemical characterization (IR microscopy, UV spectroscopy, SEM - EDX and coulometry) showed that aging of the cable resulted from a mechanism of dehydro-chlorination. The presence of two modes of electric conduction in the material was observed: electronic conduction at a low temperature (≤ -10 C) and ionic conduction at room temperature and beyond. The presence of these two modes of conduction is consistent with the mechanism of dehydro-chlorination. In contrast to an Arrhenius law, artificial aging showed a threshold effect in the thermal activation of the mechanism at the origin of the resistivity drop. The dielectric strength of the cable has been confirmed by tests at voltages or temperatures well beyond the nominal values. Measurements of differential scanning calorimetry (DSC) showed occasional more or less pronounced over-heatings that correlate with the resistivity drops, and can therefore be considered as being at the origin of the observed evolutions. (author)

  18. Do cows prefer a barn compartment with a grooved or slotted floor

    NARCIS (Netherlands)

    Stefanowska, J.; Swierstra, D.; Berg, van den J.V.; Metz, J.H.M.

    2002-01-01

    Cow preferences for one of two compartments with different floors were tested in a barn with two symmetrical, connected compartments, each intended for 16 cows. Compartments were identical except for the floor. One floor was grooved longitudinally to the feeding barrier and the other was slotted

  19. Numerical Study on Hydrogen Flow Behavior in Two Compartments with Different Connecting Pipes

    Directory of Open Access Journals (Sweden)

    HanChen Liu

    2017-01-01

    Full Text Available Hydrogen accumulation in the containment compartments under severe accidents would result in high concentration, which could lead to hydrogen deflagration or detonation. Therefore, getting detailed hydrogen flow and distribution is a key issue to arrange hydrogen removal equipment in the containment compartments. In this study, hydrogen flow behavior in local compartments has been investigated in two horizontal compartments. The analysis model is built by 3-dimensional CFD code in Cartesian coordinates based on the connection structure of the Advanced Pressurized Water Reactor (PWR compartments. It consists of two cylindrical vessels, representing the Steam Generator compartment (SG and Core Makeup Tank compartment (CMT. With standard k-ε turbulence model, the effects of the connecting pipe size and location on hydrogen concentration distribution are investigated. Results show that increasing the diameter of connection pipe (IP which is located at 800 mm from 150 mm to 300 mm facilitates hydrogen flow between compartments. Decreasing the length of IP which is located at 800 mm from 1000 mm to 500 mm can also facilitate hydrogen flow between compartments. Lower IP is in favor of hydrogen mixing with air in non-source compartment. Higher IP is helpful for hydrogen flow to the non-source term compartment from source term compartment.

  20. Mycelial fungi completely remediate di(2-ethylhexyl)phthalate, the hazardous plasticizer in PVC blood storage bag

    Energy Technology Data Exchange (ETDEWEB)

    Pradeep, S. [Enzyme Technology Laboratory, Biotechnology Division, Department of Botany, University of Calicut, Kerala 673 635 (India); Benjamin, Sailas, E-mail: sailasben@yahoo.co.in [Enzyme Technology Laboratory, Biotechnology Division, Department of Botany, University of Calicut, Kerala 673 635 (India)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Three novel phthalate utilizing fungi: A. parasiticus, F. subglutinans and P. funiculosum. Black-Right-Pointing-Pointer Fungi utilize DEHP in PVC plastics in situ, in simple mineral salt medium. Black-Right-Pointing-Pointer Employing these fungi, a batch process can remediate phthalates in plastics. Black-Right-Pointing-Pointer Phthalate-free PVC can be recycled afresh. Black-Right-Pointing-Pointer Mineral salt and phthalate remediated into fungal biomass. - Abstract: This pioneering work describes how simply, inexpensively and efficiently novel fungi utilize the alarming plasticizer, di(2-ethylhexyl)phthalate (DEHP) blended in PVC blood storage bags (BB). In order to quantify total DEHP (33.5%, w/w) present in BB, it was extracted using n-hexane and confirmed by GC-MS. Three mycelial fungi, viz., Aspergillus parasiticus, Fusarium subglutinans and Penicillium funiculosum isolated in our laboratory form heavily plastics-contaminated soil - either singly or in consortium - completely consumed intact DEHP physically bound to BB by static submerged growth (28 Degree-Sign C) in simple basal salt medium (BSM). A two-stage cultivation strategy was adopted for the complete removal of DEHP from BB in situ. During the first growth stage, almost 70% DEHP contained in the BB was consumed in 2 weeks, accompanied by increased fungal biomass ({approx}0.15-0.35 g/g BB; OD {approx}7 at 600 nm) and a sharp declining (3.3) of initial pH (7.2). Spent BSM was replaced at this stagnant growth state (low pH), thus in the second stage, remaining DEHP bound to BB utilized completely (over 99%). Furthermore, A. parasiticus and F. subglutinans also grew well on scrapes of PVC water pipes in BSM. F. subglutinans was as efficient independently as consortium in completely utilizing the DEHP bound to BB, and these fungi offer great potentials for the inexpensive and eco-friendly bioremediation of phthalates in medical and allied PVC wastes on a large

  1. Influência do tipo de agente de partição da borracha nitrílica na obtenção de blendas PVC/NBR Influence of the partitioning agent on the preparation of PVC/NBR Blends

    Directory of Open Access Journals (Sweden)

    Fábio R. Passador

    2008-09-01

    Full Text Available Borrachas nitrílicas para utilização em misturas com PVC são fornecidas em forma de pó, que são recobertas com um agente de partição para evitar compactação do produto no transporte e armazenamento, além de garantir alta fluidez e livre escoamento. Neste trabalho, buscou-se estudar a influência do tipo de agente de partição da borracha nitrílica (resina de PVC e CaCO3 na obtenção de blendas PVC/NBR. As propriedades mecânicas das blendas foram avaliadas por ensaios de tração, rasgo e dureza. As blendas com NBR com agente de partição de PVC apresentaram maior tensão na ruptura e módulo elástico que as blendas em que utilizaram NBR com agente de partição de CaCO3. A morfologia foi avaliada por microscopia eletrônica de varredura sendo bastante afetada pelo tipo de agente de partição.Nitrile rubbers used in mixture with PVC resin are supplied in powder. This kind of nitrile rubber has a partitioning agent to avoid agglomeration in the particles during the transport and storage. In this study, the influence of the partitioning agent on the preparation of PVC/NBR blends was investigated. The mechanical properties of the blends were evaluated by tensile properties, tear strength and hardness. The PVC/NBR blends with partitioning agent of PVC showed an increase in the tensile stress and Young's modulus compared to the PVC/NBR blends with partitioning agent of CaCO3. The morphology of the blends examined by scanning electron microscopy demonstrated the influence of the partitioning agent.

  2. Study on plasma pre-functionalized PVC film grafted with TiO2/PVP to improve blood compatible and antibacterial properties

    Science.gov (United States)

    Suganya, Arjunan; Shanmugavelayutham, Gurusamy; Serra Rodríguez, Carmen

    2017-04-01

    Research into the design of new biopolymers/polymer functionalized with nanoparticles is of tremendous interest to the medical sector, particularly with regard to blood-contacting devices. In this present study, a steady blood compatible and active antibacterial coating was fabricated by the grafting of titanium dioxide (TiO2)/polyvinylpyyrolidone (PVP) onto a polyvinyl chloride (PVC) film surface via the direct-current glow discharge plasma method. To enhance the chemical interaction between TiO2/PVP and PVC, the surfaces of the PVC films were functionalized by different plasmas (air, argon, and oxygen) before coating. In this study, the plasma parameters were varied, such as treatment time of about 5-20 min for a constant power of 100 W, potential 300 V, and a constant gas pressure of 2 Pa for air, argon, and oxygen gas environment. Then, the different plasma treatments on the PVC films, TiO2/PVP were grafted using a simple dip-coating method. In addition, the TiO2/PVP-grafted PVC films were characterized by contact angle, attenuated total reflectance Fourier transform infrared spectroscopy, field-emission scanning electron microscope, and x-ray photo electron spectroscopy. Importantly, TiO2/PVP is grafted onto the PVC surface due to the plasma-based retained functionality and demonstrates adhesive efficiency, which was observed by XPS. The bio-stability of the TiO2/PVP-modified PVC film was evaluated by in vitro platelet activation analysis and protein adsorption analysis. Then, the antibacterial properties were evaluated by the agar diffusion method against Escherichia coli. The result reveals that the grafting of TiO2/PVP was slightly higher for the 15 min oxygen plasma-functionalized PVC, which significantly decreases the platelet adhesion and protein adsorption. Moreover, the antibacterial properties of the 15 min oxygen plasma-functionalized PVC with TiO2/PVP-grafted film is also greatly improved compared with an air- and argon-functionalized surface

  3. Identification Bracelet Precipitated Acute Compartment Syndrome during Intravenous Infusion in an Obtunded Patient

    Directory of Open Access Journals (Sweden)

    Wahib Zafar

    2016-01-01

    Full Text Available Acute compartment syndrome is a serious condition requiring immediate medical care. A lack of urgent medical treatment can result in serious complications such as loss of function and even amputation. While the pathophysiology of acute compartment syndrome is well understood, numerous potential causes are still being discovered. A rare cause of acute compartment syndrome is IV infiltration. We present a case of acute compartment syndrome resulting from intravenous infusion due to proximal placement of a patient identification bracelet. We conclude that both routine evaluation for IV infiltration and proximal placement of IV lines are essential for prevention of acute compartment syndrome.

  4. Compartment differences of inflammatory activity in chronic obstructive pulmonary disease.

    Science.gov (United States)

    Ji, Jie; von Schéele, Ida; Bergström, Jan; Billing, Bo; Dahlén, Barbro; Lantz, Ann-Sofie; Larsson, Kjell; Palmberg, Lena

    2014-08-26

    Chronic obstructive pulmonary disease (COPD) is associated with local and systemic inflammation. The knowledge of interaction and co-variation of the inflammatory responses in different compartments is meagre. Healthy controls (n = 23), smokers with (n = 28) and without (n = 29) COPD performed spirometry and dental examinations. Saliva, induced sputum, bronchoalveolar lavage (BAL) fluid and serum were collected. Inflammatory markers were assessed in all compartments using ELISA, flow cytometry and RT-PCR. Negative correlations between lung function and saliva IL-8 and matrix metalloproteinase-9 (MMP-9) were found in smokers with COPD. IL-8 and MMP-9 in saliva correlated positively with periodontal disease as assessed by gingival bleeding in non-smokers.Tumor necrosis factor-α (TNF-α) in saliva, serum and TNF-α mRNA expression on macrophages in BAL-fluid were lower in smokers than in non-smokers. There were positive correlations between soluble TNF-α receptor 1 (sTNFR1) and soluble TNF-α receptor 2 (sTNFR2) in sputum, BAL-fluid and serum in all groups. Sputum interleukin-8 (IL-8) or interleukin-6 (IL-6) was positively correlated with sTNFR1 or sTNFR2 in non-smokers and with sTNFR2 in COPD. Saliva which is convenient to collect and analyse, may be suitable for biomarker assessment of disease activity in COPD. An attenuated TNF-α expression was demonstrated by both protein and mRNA analyses in different compartments suggesting that TNF-α response is altered in moderate and severe COPD. Shedding of TNFR1 or TNFR2 is similarly regulated irrespective of airflow limitation.

  5. Ultrasound-assisted surface treatment of ZrO2with BSA and incorporating in PVC to improve the properties of the obtained nanocomposites: Fabrication and characterization.

    Science.gov (United States)

    Mallakpour, Shadpour; Hajjari, Zahra

    2018-03-01

    This paper describes the preparation of poly(vinyl chloride) (PVC) nanocomposites (NCs) reinforced with modified zirconia (ZrO 2 ) nanoparticles (NPs). The ZrO 2 NPs were defined as efficient filler for PVC NCs. For achieving the best dispersion and improvement of properties, the surface of ZrO 2 NPs was modified by Bovine Serum Albumin (BSA). Carboxylic acids and amines are important functional groups of BSA which handle the grafting BSA on the surface of ZrO 2 NPs. The PVC/ZrO 2 -BSA NCs were fabricated by incorporation of various amounts of the ZrO 2 -BSA NPs (3, 6 and 9wt%) into PVC matrix. All the above processes were accomplished by ultrasonication asa green and environmentally-friendly method. Also, the magnetic and mechanical stirrer was used for the preparation of samples but the results are not suitable and the aggregation was observed which indicated the use of ultrasonic irradiation is the best method for the preparation of NC. The products were characterized by Fourier transform infrared spectroscopy, Transmission electron microscopy, Field emission scanning electron microscopy, X-ray diffraction, Thermogravimetric analysis, Ultraviolet-visible spectroscopy, photoluminescence spectroscopy, energy dispersive X-ray spectroscopy, wettability, and mechanical tests. The achieved PVC/ZrO 2 -BSA NCs showed high thermal stability, good mechanical, optical and wettability properties compared to the pure PVC. In addition, among the obtained NCs, the PVC/ZrO 2 -BSA NC 6wt% showed the best improvement. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Congenital absence of superficial posterior compartment calf muscles.

    Science.gov (United States)

    Tibrewal, Saket; Alyas, Faisal; Vemulapalli, Krishna

    2014-06-01

    Although various congenital abnormalities have been described, congenital absence of calf musculature is extremely rare, with only one report on its complete absence. We are the first to describe a case of congenital absence of muscles of the superficial posterior compartment of the calf presenting in a toddler. The child presented with a history of a painless limp, however no significant difference was found in functional gait analysis. We suggest that such cases should be monitored and parents can be reassured that no immediate treatment is required.

  7. Modeling fires in adjacent ship compartments with computational fluid dynamics

    International Nuclear Information System (INIS)

    Wix, S.D.; Cole, J.K.; Koski, J.A.

    1998-01-01

    This paper presents an analysis of the thermal effects on radioactive (RAM) transportation packages with a fire in an adjacent compartment. An assumption for this analysis is that the adjacent hold fire is some sort of engine room fire. Computational fluid dynamics (CFD) analysis tools were used to perform the analysis in order to include convective heat transfer effects. The analysis results were compared to experimental data gathered in a series of tests on tile US Coast Guard ship Mayo Lykes located at Mobile, Alabama

  8. Recent advances in the management of abdominal compartment syndrome

    International Nuclear Information System (INIS)

    Saleem, T.B.; Ahmed, I.

    2004-01-01

    Abdominal compartment syndrome is a systemic syndrome involving derangement in cardiovascular hemodynamics, respiratory and renal function as a result of sustained increase in intra-abdominal pressure. This results in multi-organ failure requiring prompt action and treatment. Presentation can be acute, chronic and acute on chronic. Initial diagnosis is clinical, confirmed by measurement of urinary bladder pressure. Treatment is abdominal decompression by laparostomy and delayed abdominal closure. Awareness among the surgeons has increased because laparoscopy has resulted in determination of intra-abdominal pressure as a readily measurable quantity. They have been able to appreciate the benefit of abdominal decompression by performing repeated planned laparotomies for trauma. (author)

  9. The Golgi apparatus: roles for distinct 'cis' and 'trans' compartments.

    Science.gov (United States)

    Rothman, J E

    1982-01-01

    The Golgi apparatus seems to consist of distinct cis and trans compartments that are proposed to act sequentially to refine the protein export of the endoplasmic reticulum by removing escaped endoplasmic reticulum proteins. Refinement may be a multi-stage process that employs a principle akin to fractional distillation; the stack of cisternae comprising the cis Golgi may be the plates in this distillation tower. The trans Golgi, consisting of the last one or two cisternae, may be the receiver that collects from the cis Golgi only its most refined fraction for later distribution to specific locations throughout the cell.

  10. Cellular endocytic compartment localization of expressed canine CD1 molecules

    DEFF Research Database (Denmark)

    Schjærff, Mette; Keller, Stefan M.; Affolter, Verena K.

    2016-01-01

    CD1 molecules are glycoproteins present primarily on dendritic cells (DCs), which recognize and presenta variety of foreign- and self-lipid antigens to T-cells. Humans have five different CD1 isoforms that sur-vey distinct cellular compartments allowing for recognition of a large repertoire...... onlya diminished GFP expression. In conclusion, canine CD1 transfectants show distinct localization patternsthat are similar to human CD1 proteins with the exception of the canine CD1d isoform, which most likelyis non-functional. These findings imply that canine CD1 localization overall resembles human...

  11. Hyperaccumulators of mercury in the industrial area of a PVC factory in Vlora (Albania

    Directory of Open Access Journals (Sweden)

    Shehu Julian

    2014-01-01

    Full Text Available Contamination by heavy metals is one of the major threats to soil and water as well as human health. Much attention is being paid to metal-accumulating plants that may be used for the phytoremediation of contaminated soils. Some plants can accumulate remarkable levels of metals, 100-1000-fold the levels normally accumulated in most species. This study evaluated the potential of mercury accumulation of 17 plant species growing on contaminated sites in the ex-industrial area of the PVC Factory, Vlora, Albania. Plant roots, shoots and soil samples were collected and analyzed for the selected metal concentration values. The biological accumulation coefficient (BAC was calculated to evaluate the potential use of plant species for phytoremediation purposes. The concentration of Hg in soils inside the contaminated area varied from 45-301 mg/kg-1. The concentration of Hg in plant shoots and roots varied from 0.1 to 12.9 mg/kg-1 and 0.1 to 4.2 mg/kg-1, respectively. Species Medicago sativa L. and Dittrichia viscosa (L. W. Greuter were found to be the most suitable plants for phytoremediation of the site contaminated with mercury (BAC values varied from 30-10 percent, respectively. Considering the BAC values, none of the plant species was found to be a hyperaccumulator; however, plants with high BCF (metal concentration ratio of plant root to soil and low BTC (metal concentration ratio of plant shoots to roots have the potential for phytostabilization and phytoextraction. The results of this study can be used for the management and decontamination of soils with mercury using plant species having phytoremediation potential/characteristics.

  12. Citotoxicidade de tubos de PVC esterilizados em óxido de etileno após exposição à radiação gama Citotoxicidad de tubos de PVC esterilizados en óxido de etileno luego de exposición a la radiación gamma Cytotoxicity of PVC tubes sterilized in ethylene oxide after gamma radiation exposure

    Directory of Open Access Journals (Sweden)

    Rafael Queiroz de Souza

    2013-04-01

    Full Text Available Materiais esterilizados em raios gama, ao serem re-esterilizados em óxido de etileno (EO, formam substâncias tóxicas? Esta questão norteou o objetivo deste estudo, que foi investigar o potencial efeito citotóxico do PVC esterilizado em radiação gama e re-esterilizado em EO pelo método da difusão em ágar em culturas celulares. Nove tubos de PVC foram submetidos à esterilização em radiação gama e re-esterilizados em EO. Os tubos foram divididos em um total de 81 unidades de análise, que foram testadas de forma a representar as superfícies internas, externas e massa de cada tubo. Concluiu-se que os materiais de PVC esterilizados em Radiação Gama e consecutivamente re-esterilizados em EO não são citotóxicos.Los materiales esterilizados con rayos gama, al ser re-esterilizados en óxido de etileno (EO, ¿forman substancias tóxicas? Esta pregunta orientó el objetivo del presente estudio, que fue investigar el potencial efecto citotóxico del PVC esterilizado en radiación gamma y re-esterilizado en EO por el método de difusión en agar en cultivos celulares. Nueve tubos de PVC fueron sometidos a esterilización por radiación gamma y re-esterilizados en EO. Se les aplicaron en total 81 unidades de análisis, las cuales fueron testeadas de manera tal de representar las superficies internas, externas y la masa de cada tubo. Se concluyó en que los materiales de PVC esterilizados con Radiación Gamma y, posteriormente, con EO, no son citotóxicos.Do materials sterilized using gamma rays become toxic when re-sterilized in ethylene oxide? This question guided the objective of this study, which was to investigate the potential cytotoxic effect of PVC sterilized by gamma radiation and re-sterilized with EO by the agar diffusion method in cell cultures. Nine PVC tubes were subjected to gamma radiation sterilization and were re-sterilized in EO. The tubes were divided into a total of 81 units of analysis that were tested so as to

  13. Evaluation of the use of plastic film of polyvinyl chloride (PVC in the storage of carrots Avaliação do uso de filme plástico de policloreto de vinila (PVC no armazenamento de cenouras

    Directory of Open Access Journals (Sweden)

    Marie Yamamoto Reghin

    2010-12-01

    Full Text Available In carrot roots, reducing the percentage of mass and the occurrence of diseases are the leading causes of post-harvest losses during storage and marketing. Also, budding and rooting are indicated as the possible effect on the use of modified atmosphere in root vegetables and tubers. This study was conducted to compare forms of packaging and storage time on weight loss, percentage of sprouted roots and concentration of ? carotene in three carrot cultivars. The carrots were placed in shallow trays of polystyrene and wrapped with PVC film, and put two roots per tray, or in bulk. Then, the roots were stored in the dark at ambient conditions for 20 days Carrots stored with plastic film (PVC remained commercially viable for up to 12 days. When stored in bulk showed weight loss of more than 5% in 4 days, which is not feasible to trade. The content of carotenoids was constant throughout the storage period for the in three cultivars.Em raízes de cenoura, a redução da porcentagem de massa e a ocorrência de doenças são as principais causas de perda pós-colheita durante o armazenamento e a comercialização. Também, a brotação e o enraizamento são apontados como os possíveis prejuízos ao uso da atmosfera modificada em hortaliças de raízes e tubérculos. O presente estudo foi realizado com o objetivo de comparar formas de embalagem e tempo de armazenamento sobre a perda de massa, porcentagem de raízes brotadas e concentração de ? caroteno em três cultivares de cenoura. As cenouras foram acondicionadas em bandejas rasas de poliestireno e embaladas com filme plástico de PVC, sendo acondicionadas duas raízes por bandeja, ou a granel. Em seguida, as raízes foram armazenadas no escuro em condições ambiente durante 20 dias As cenouras armazenadas com filme plástico de (PVC mantiveram-se viáveis comercialmente por até 12 dias. Quando armazenadas à granel apresentaram perda de peso superior a 5% em 4 dias, não sendo viável para o com

  14. Gene expression analysis in the compartments of the murine uterus.

    Science.gov (United States)

    Rosario, Gracy Xavier; Cheng, Jr-Gang; Stewart, Colin L

    2016-01-01

    Embryo implantation, a key critical feature of mammalian pregnancy, involves co-ordinate interplay between an incoming blastocyst and a receptive uterus. Aberrations in signaling cascades during this process result in pregnancy loss in mammals, including women. Analysis of the complete uterus at any given point either during preparation for implantation or during and after embryo attachment and invasion makes it difficult to assign specific signaling mechanism to the individual cellular compartments of the uterus. Here, we describe methods for the specific isolation of the luminal epithelium (LE) and subsequent analysis of gene expression/signaling pathways during embryo attachment. We further describe the analysis of RNA and proteins by specific techniques of quantitative PCR (qPCR), immunostaining and Western blotting of uterine tissues. These methods can be applied to the other cellular compartments of the uterus and embryo invasion and endometrial development. These techniques will be beneficial to investigators for delineating the mechanisms involved during embryo attachment and female reproduction as well as providing a means to studying highly dynamic changes in gene expression in tissues. Copyright © 2015 International Society of Differentiation. Published by Elsevier B.V. All rights reserved.

  15. Involvement of the mitochondrial compartment in human NCL fibroblasts

    International Nuclear Information System (INIS)

    Pezzini, Francesco; Gismondi, Floriana; Tessa, Alessandra; Tonin, Paola; Carrozzo, Rosalba; Mole, Sara E.; Santorelli, Filippo M.; Simonati, Alessandro

    2011-01-01

    Highlights: ► Mitochondrial reticulum fragmentation occurs in human CLN1 and CLN6 fibroblasts. ► Likewise mitochondrial shift-to periphery and decreased mitochondrial density are seen. ► Enhanced caspase-mediated apoptosis occurs following STS treatment in CLN1 fibroblasts. -- Abstract: Neuronal ceroid lipofuscinosis (NCL) are a group of progressive neurodegenerative disorders of childhood, characterized by the endo-lysosomal storage of autofluorescent material. Impaired mitochondrial function is often associated with neurodegeneration, possibly related to the apoptotic cascade. In this study we investigated the possible effects of lysosomal accumulation on the mitochondrial compartment in the fibroblasts of two NCL forms, CLN1 and CLN6. Fragmented mitochondrial reticulum was observed in all cells by using the intravital fluorescent marker Mitotracker, mainly in the perinuclear region. This was also associated with intense signal from the lysosomal markers Lysotracker and LAMP2. Likewise, mitochondria appeared to be reduced in number and shifted to the cell periphery by electron microscopy; moreover the mitochondrial markers VDCA and COX IV were reduced following quantitative Western blot analysis. Whilst there was no evidence of increased cell death under basal condition, we observed a significant increase in apoptotic nuclei following Staurosporine treatment in CLN1 cells only. In conclusion, the mitochondrial compartment is affected in NCL fibroblasts invitro, and CLN1 cells seem to be more vulnerable to the negative effects of stressed mitochondrial membrane than CLN6 cells.

  16. Identifiability Results for Several Classes of Linear Compartment Models.

    Science.gov (United States)

    Meshkat, Nicolette; Sullivant, Seth; Eisenberg, Marisa

    2015-08-01

    Identifiability concerns finding which unknown parameters of a model can be estimated, uniquely or otherwise, from given input-output data. If some subset of the parameters of a model cannot be determined given input-output data, then we say the model is unidentifiable. In this work, we study linear compartment models, which are a class of biological models commonly used in pharmacokinetics, physiology, and ecology. In past work, we used commutative algebra and graph theory to identify a class of linear compartment models that we call identifiable cycle models, which are unidentifiable but have the simplest possible identifiable functions (so-called monomial cycles). Here we show how to modify identifiable cycle models by adding inputs, adding outputs, or removing leaks, in such a way that we obtain an identifiable model. We also prove a constructive result on how to combine identifiable models, each corresponding to strongly connected graphs, into a larger identifiable model. We apply these theoretical results to several real-world biological models from physiology, cell biology, and ecology.

  17. Delayed Presentation of Gluteal Compartment Syndrome: The Argument for Fasciotomy

    Directory of Open Access Journals (Sweden)

    John E. Lawrence

    2016-01-01

    Full Text Available A male patient in his fifties presented to his local hospital with numbness and weakness of the right leg which left him unable to mobilise. He reported injecting heroin the previous morning. Following an initial diagnosis of acute limb ischaemia the patient was transferred to a tertiary centre where Computed Tomography Angiography was reported as normal. Detailed neurological examination revealed weakness in hip flexion and extension (1/5 on the Medical Research Council scale with complete paralysis of muscle groups distal to this. Sensation to pinprick and light touch was globally reduced. Blood tests revealed acute kidney injury with raised creatinine kinase and the patient was treated for rhabdomyolysis. Orthopaedic referral was made the following day and a diagnosis of gluteal compartment syndrome (GCS was made. Emergency fasciotomy was performed 56 hours after the onset of symptoms. There was immediate neurological improvement following decompression and the patient was rehabilitated with complete nerve recovery and function at eight-week follow-up. This is the first documented case of full functional recovery following a delayed presentation of GCS with sciatic nerve palsy. We discuss the arguments for and against fasciotomy in cases of compartment syndrome with significant delay in presentation or diagnosis.

  18. Melanin Transferred to Keratinocytes Resides in Nondegradative Endocytic Compartments.

    Science.gov (United States)

    Correia, Maria S; Moreiras, Hugo; Pereira, Francisco J C; Neto, Matilde V; Festas, Tiago C; Tarafder, Abul K; Ramalho, José S; Seabra, Miguel C; Barral, Duarte C

    2018-03-01

    Melanin transfer from melanocytes to keratinocytes and subsequent accumulation in the supranuclear region is a critical process in skin pigmentation and protection against UVR. We have previously proposed that the main mode of transfer between melanocytes and keratinocytes is through exo/endocytosis of the melanosome core, termed melanocore. In this study, we developed an in vitro uptake assay using melanocores secreted by melanocytes. We show that the uptake of melanocores, but not melanosomes, by keratinocytes is protease-activated receptor-2-dependent. Furthermore, we found that the silencing of the early endocytic regulator Rab5b, but not the late endocytic regulators Rab7a or Rab9a, significantly impairs melanocore uptake by keratinocytes. After uptake, we observed that melanin accumulates in compartments that are positive for both early and late endocytic markers. We found that melanin does not localize to either highly degradative or acidic organelles, as assessed by LysoTracker and DQ-BSA staining, despite the abundance of these types of organelles within keratinocytes. Therefore, we propose that melanocore uptake leads to storage of melanin within keratinocytes in hybrid endocytic compartments that are not highly acidic or degradative. By avoiding lysosomal degradation, these specialized endosomes may allow melanin to persist within keratinocytes for long periods. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  19. Atraumatic medial collateral ligament oedema in medial compartment knee osteoarthritis

    International Nuclear Information System (INIS)

    Bergin, D.; Keogh, C.; O'Connell, M.; Zoga, A.; Rowe, D.; Shah, B.; Eustace, S.

    2002-01-01

    Objective: To describe and determine the prevalence of atraumatic medial collateral oedema identified in patients with medial compartment osteoarthritis. Design and patients: Sixty patients, 30 patients with medial compartment knee osteoarthritis (Kellgren and Lawrence grade 2 to 4) and 30 age-matched patients with atraumatic knee pain without osteoarthritis, referred for MR imaging over a 2 year period were included in the study. In each case, severity of osteoarthritis was recorded on radiographs and correlated with the presence or absence of medial collateral ligament oedema at MR imaging. Results: Medial collateral oedema was identified in 27 of the 30 patients with osteoarthritis, of whom 14 had grade 1 oedema and 13 had grade 2 oedema compared with the presence of medial collateral ligament oedema (grade 1) in only two of the 30 control patients without osteoarthritis (P<<0.0001). Conclusion: Medial collateral oedema is common in patients with osteoarthritis in the absence of trauma. When identified, medial collateral ligament oedema should be considered to be a feature of osteoarthritis and should not be incorrectly attributed to an acute traumatic injury. (orig.)

  20. Bogota Bag in Abdominal Compartment Syndrome at Kathmandu Model Hospital.

    Science.gov (United States)

    Joshi, Bijendra Dhoj; Koirala, Udaya; Upadhyaya, Amit M; Joshi, Arbin; Dhital, Saroj

    2017-09-08

    The gold standard of quick and definitive treatment of Abdominal compartment syndrome (ACS) is surgical decompression by opening the abdomen and leaving it open until intra-abdominal pressure decreases. Temporary abdominal closure techniques are used to postpone definite closure until predisposing factors causing pathologic elevation of intra-abdominal pressure are resolved.This study aim to analyze feasibility of Bogota Bag placement as a way of temporary abdominal closure. Cases admitted in the period of eight years that were diagnosed to have or at risk to develop ACS and managed with 'Bogota Bag', irrespective of primary diagnosis were reviewed retrospectively. Cause of ACS, reasons to place Bogota bag, its complications and final outcome in terms of mortality related or not related with Bogota Bag placement were assessed. Total of ten patients had placement of Bogota Bag in the period of eight years. Laparotomy for bowel perforation with peritonitis was the most common primary condition contributing to ACS. Bogota bag was placed in two cases after emergency decompression as a therapeutic measure whereas others were done as prophylactic measure. There were two mortalities (20%) which were not directly related to abdominal compartment syndrome. Abdomen closure with Bogota Bag for patients with ACS or likely to develop ACS is a feasible technique with minimal procedure related morbidities.

  1. A multiple-compartment model for biokinetics studies in plants

    International Nuclear Information System (INIS)

    Garcia, Fermin; Pietrobron, Flavio; Fonseca, Agnes M.F.; Mol, Anderson W.; Rodriguez, Oscar; Guzman, Fernando

    2001-01-01

    In the present work is used the system of linear equations based in the general Assimakopoulos's GMCM model , for the development of a new method that will determine the flow's parameters and transfer coefficients in plants. The need of mathematical models to quantify the penetration of a trace substance in animals and plants, has often been stressed in the literature. Usually, in radiological environment studies, it is used the mean value of contaminant concentrations on whole or edible part plant body, without taking in account vegetable physiology regularities. In this work concepts and mathematical formulation of a Vegetable Multi-compartment Model (VMCM), taking into account the plant's physiology regularities is presented. The model based in general ideas of the GMCM , and statistical Square Minimum Method STATFLUX is proposed to use in inverse sense: the experimental time dependence of concentration in each compartment, should be input, and the parameters should be determined from this data in a statistical approach. The case of Uranium metabolism is discussed. (author)

  2. Compartment Syndrome as a Result of Systemic Capillary Leak Syndrome

    Directory of Open Access Journals (Sweden)

    Kwadwo Kyeremanteng

    2016-01-01

    Full Text Available Objective. To describe a single case of Systemic Capillary Leak Syndrome (SCLS with a rare complication of compartment syndrome. Patient. Our patient is a 57-year-old male, referred to our hospital due to polycythemia (hemoglobin (Hgb of 220 g/L, hypotension, acute renal failure, and bilateral calf pain. Measurements and Main Results. The patient required bilateral forearm, thigh, and calf fasciotomies during his ICU stay and continuous renal replacement therapy was instituted following onset of acute renal failure and oliguria. Ongoing hemodynamic (Norepinephrine and Milrinone infusion and respiratory (ventilator support in the ICU was provided until resolution of intravascular fluid extravasation. Conclusions. SCLS is an extremely rare disorder characterized by unexplained episodic capillary hyperpermeability, which causes shift of volume and protein from the intravascular space to the interstitial space. Patients present with significant hypotension, hemoconcentration, hypovolemia, and oliguria. Severe edema results from leakage of fluid and proteins into tissue. The most important part of treatment is maintaining stable hemodynamics, ruling out other causes of shock and diligent monitoring for complications. Awareness of the clinical syndrome with the rare complication of compartment syndrome may help guide investigations and diagnoses of these critically ill patients.

  3. A development and biological safety evaluation of novel PVC medical devices with surface structures modified by UV irradiation to suppress plasticizer migration.

    Science.gov (United States)

    Haishima, Yuji; Isama, Kazuo; Hasegawa, Chie; Yuba, Toshiyasu; Matsuoka, Atsuko

    2013-09-01

    This study examines the chemical, physicochemical, and biological properties of PVC sheets treated with UV irradiation on their surfaces to suppress the elution of a plasticizer, di-(2-ethylhexyl) phthalate (DEHP), for developing novel polyvinyl chloride (PVC) medical devices. The PVC sheets irradiated under conditions 1 (52.5 μW/cm(2), 136 J/cm(2)) and 2 (0.45 mW/cm(2), 972 J/cm(2)) exhibited considerable toxicity in cytotoxicity tests and chromosome aberration tests due to the generation of DEHP oxidants, but no toxicity was detected in the PVC sheet irradiated under condition 3 (8.3 mW/cm(2), 134 J/cm(2)). The release of DEHP from the surface irradiated under condition 3 was significantly suppressed, and mono-(2-ethylhexyl) phthalate (MEHP) converted from a portion of DEHP could be easily removed from the surface by washing with methanol. The physicochemical properties of the surface regarding the suppression of DEHP elution remained stable through all sterilizations tested, but MEHP elution was partially recrudesced by the sterilizations except for gamma irradiation. These results indicated that UV irradiation using a strong UV-source over a short time (condition 3) followed by methanol washing and gamma sterilization may be useful for preparing novel PVC products that did not elute plasticizers and do not exhibit toxicity originating from UV irradiation. Copyright © 2013 Wiley Periodicals, Inc.

  4. Effects of UV-accelerated weathering and natural weathering conditions on anti-fungal efficacy of wood/PVC composites doped with propylene glycol-based HPQM

    Directory of Open Access Journals (Sweden)

    P. Srimalanon

    2016-04-01

    Full Text Available This work studied the mechanical, physical and weathering properties and anti-fungal efficacy of polyvinyl chloride(PVC and wood flour/polyvinyl chloride composites(WPVC. 2-hydroxypropyl-3-piperazinyl-quinoline carboxylic acid methacrylate (HPQM in propylene glycol was used as an anti-fungal agent. Propylene glycol-based HPQM was doped in neat PVC and in WPVC containing 50 and 100 pph wood (WPVC-50 and WPVC-100. The flexural properties of PVC decreased when propylene glycol-based HPQM was added. However, adding this component did not affect the flexural properties of WPVC. Fungal growth inhibition test and dry weight technique were used for evaluation of anti-fungal effectiveness. Aspergillus niger was used as a testing fungus. Adding propylene glycol-based HPQM to WPVC-100 led to the most effective anti-fungal performance. Wood flour acted as an anti-fungal promoter for the WPVC composites. The optimal dosages of propylene glycol-based HPQM in PVC, WPVC-50, and WPVC-100 were 50000, 15000, and 10000 ppm, respectively. UV-accelerated weathering aging and natural weathering conditions were found to affect the flexural properties of PVC and WPVC. The change in the anti-microbial performance of WPVC under natural weathering were slower than those under UV-accelerated weathering aging. The anti-microbial evaluation indicated that the samples doped with less than 20000 ppm propylene glycol-based HPQM had a more pronounced effect than the ones doped with higher dosages.

  5. Compatibilization of immiscible poly(vinyl chloride) (PVC)/polystyrene (PS) blends with maleic anhydride-styrene-vinyl acetate terpolymer (MAStVA)

    Science.gov (United States)

    İmren, Dilek

    2010-01-01

    In this study, compatibilizing effects of maleic anhydride-styrene-vinyl acetate (MAStVA) with various terpolymer ratios on immiscible blends of poly(vinyl chloride) (PVC) and polystyrene (PS) blends were investigated by viscometry method, thermo-mechanical analysis (TMA) and infrared spectroscopy (FTIR). The viscosimetric measurements were carried out for PVC, PS, a (70:30) blend of PVC/PS and a blend of PVC/PS/MAStVA containing 2-10% of the terpolymer in the range of concentrations (0.25-2.00 g dL -1) where tetrahydrofuran (THF) is the solvent. The interaction parameter (Δ b) was used to study the miscibility and compatibility of polymer blend in solution, obtained from the modified Krigbaum and Wall theory. TMA and FTIR measurements were also used to investigate the miscibility of this pair of polymers. In consequence of the study, it was observed that a considerable improvement was achieved in the miscibility of PVC/PS blends by adding among 4 and 10 wt.% of compatibilizer.

  6. Investigation of the primary plasticisers present in polyvinyl chloride (PVC) products currently authorised as food contact materials.

    Science.gov (United States)

    Carlos, Katherine S; de Jager, Lowri S; Begley, Timothy H

    2018-03-15

    PVC is a common food contact material that is usually plasticised to increase its flexibility. Phthalates are one class of chemical compounds that are often used as plasticisers in PVC in a wide range of industries. They may be used in packaging materials for foods and can also be found in components of certain food processing equipment such as conveyor belts and tubing. Transfer of plasticisers from packaging to foods can occur. In recent years, there has been increased interest in understanding the health effects of phthalates, as well as the possible human exposure levels. However, there is limited information available about the routes of exposure to phthalates. In July 2014, the Chronic Hazard Advisory Panel (CHAP) produced a report for the U.S. Consumer Product Safety Commission detailing the potential health hazards of phthalates and phthalate alternatives. This report listed diet as one factor contributing greater than or equal to 10% of total phthalate exposure. As a result of this report, the U.S. Food and Drug Administration (FDA) is interested in determining the types of the primary plasticiser present in food packaging and processing materials as well as their concentrations. An investigation was conducted of 56 different samples of PVC food packaging and food processing materials available in the US market using a solvent extraction and GC-MS analysis. Nine different plasticisers including three phthalates, di(2-ethylhexyl) phthalate, diisononyl phthalate and diisodecyl phthalate, were identified in the products tested. The plasticiser concentrations ranged from 1 to 53% depending on the types of food contact materials and the type of plasticiser. Overall, it appears that manufacturers are switching away from phthalates as their primary plasticiser to alternate compounds such as ESBO, ATBC, DEHT, DINCH, DEHA and DINA.

  7. PVC esaslı CTP kesme atığı dolgulu malzemelerin termal özelliklerinin incelenmesi

    Directory of Open Access Journals (Sweden)

    Arzu Özüyağlı

    2016-08-01

    Full Text Available Bu çalışmada, PVC üretiminde kullanılan CaCO3 dolgu malzemesi yerine, sanayi atığı kullanılması sonucu termal özelliklerdeki değişim araştırılmıştır. Kullanılan sanayi atığı CTP boru üretiminden sulu kesim sırasında çıkmakta ve SiO2, cam elyaf ve polyester reçine içermektedir. Sulu çamur halinde filtre presten çıkan atık fabrikadan alındıktan sonra kurutma ve eleme işlemleri uygulanarak toz formuna getirilmiştir. Numuneler PVC, CTP atık tozu ve prosese yardımcı maddeler mikserde karıştırılarak ekstrüzyon yöntemi ile profil şeklinde üretilmiştir. Atık toz PVC’ye oranla ağırlıkça %5-%70 oranlarında dolgu malzemesi olarak kullanılmıştır. Kalsit (CaCO3 katkılı ve katkısız PVC numuneleri de benzer proses parametreleri kullanılarak üretilmiştir. Üretilen numuneler, seramik krozeler kullanılarak DTA-TG analizleri yapılmıştır.

  8. Estimation of adipose compartment volumes in CT images of a mastectomy specimen

    Science.gov (United States)

    Imran, Abdullah-Al-Zubaer; Pokrajac, David D.; Maidment, Andrew D. A.; Bakic, Predrag R.

    2016-03-01

    Anthropomorphic software breast phantoms have been utilized for preclinical quantitative validation of breast imaging systems. Efficacy of the simulation-based validation depends on the realism of phantom images. Anatomical measurements of the breast tissue, such as the size and distribution of adipose compartments or the thickness of Cooper's ligaments, are essential for the realistic simulation of breast anatomy. Such measurements are, however, not readily available in the literature. In this study, we assessed the statistics of adipose compartments as visualized in CT images of a total mastectomy specimen. The specimen was preserved in formalin, and imaged using a standard body CT protocol and high X-ray dose. A human operator manually segmented adipose compartments in reconstructed CT images using ITK-SNAP software, and calculated the volume of each compartment. In addition, the time needed for the manual segmentation and the operator's confidence were recorded. The average volume, standard deviation, and the probability distribution of compartment volumes were estimated from 205 segmented adipose compartments. We also estimated the potential correlation between the segmentation time, operator's confidence, and compartment volume. The statistical tests indicated that the estimated compartment volumes do not follow the normal distribution. The compartment volumes are found to be correlated with the segmentation time; no significant correlation between the volume and the operator confidence. The performed study is limited by the mastectomy specimen position. The analysis of compartment volumes will better inform development of more realistic breast anatomy simulation.

  9. Electrodos de PVC/TTF-TCNQ modificados. Aplicación como sensores y biosensores electroquímicos

    OpenAIRE

    Sánchez-Obrero, Guadalupe

    2013-01-01

    En este trabajo de Tesis Doctoral, se estudia el desarrollo de nuevos electrodos, basados en la modificación del electrodo compósito PVC/TTF-TCNQ, mediante nanopartículas de oro. Se pretende que estos nuevos electrodos sean susceptibles de ser empleados como sensores y/o biosensores electroquímicos, para la detección de analitos de interés. De ellos, se han elegido para su determinación la glucosa, el paracetamol y los compuestos fenólicos presentes en los vinos. La Tesis Doctoral está es...

  10. Influencia de la inclusión de desecho de PVC sobre el CBR de un material granular tipo subbase

    Directory of Open Access Journals (Sweden)

    Edgar Rodríguez Rincón

    2006-07-01

    Full Text Available En Colombia, los materiales granulares de alta calidad para la conformación de estructuras de pavimentos flexibles son de difícil obtención. En algunas ocasiones el Ingeniero de carreteras debe trabajar con materiales granulares que no cumplen los requisitos mínimos de calidad de la especificación vial pertinente. En este caso el Ingeniero debe intentar mejorar las propiedades del material ya sea por medios mecánicos o químicos. En la presente investigación se utilizó desecho de PVC como material de adición, para modificar el comportamiento de una subbase granular. A partir de ensayos de Proctor y CBR se comparó el comportamiento del material natural, y mezclado con diferentes proporciones del desecho de PVC. Los resultados de la investigación muestran que el CBR de una mezcla de material granular, tipo subbase, y material de desecho, presenta un incremento notable. Además, la mezcla modificada logra cambiar el peso unitario del material, obteniéndose una mezcla con mayor resistencia y menor peso.In Colombia, the granular materials of high quality for the conformation of flexible pavements structures are of difficult obtaining. In some cases the Engineer of highways must work with granular materials that do not fulfill the requirements of minimum quality standards of the pertinent road specification. In this case the Engineer must try to improve the properties of the material either. In the present investigation, PVC remainders were used like adding material, to modify the behavior of a granular subbase. From tests of Proctor and CBR, the behavior of the natural and mixed material with different proportions of the PVC remainder was compared. The results of the investigation shown that the CBR of a mixture of granular material type subbase and the remainder material, present a remarkable increment. In addition, the modified mixture manages to modify the unitary weight of the material, obtaining a mixture with greater resistance and

  11. Fatigue characterization of Poly Vinyl Chloride (PVC) foam core sandwich composite using the G-control method

    DEFF Research Database (Denmark)

    Manca, Marcello; Berggreen, Christian; Carlsson, Leif A.

    2016-01-01

    , compression and shear to determine in-plane and out-of-plane mechanical properties, such as Young’s modulus, Poisson’s ratio and shear modulus. These properties were then used in an analytical model of the mixed-mode bending sandwich specimen to calculate compliance and energy release rate. Finite element......This paper presents experimental results from cyclic crack propagation tests performed on sandwich specimens with glass/epoxy face sheets and Poly Vinyl Chloride (PVC) foam cores using the G-controlled cyclic energy release rate (ΔG) test procedure. The face material was tested in tension...

  12. Mixing of radiolytic hydrogen generated within a containment compartment following a LOCA

    International Nuclear Information System (INIS)

    Willcutt, G.J.E. Jr.; Gido, R.G.

    1978-07-01

    The objective of this work was to determine hydrogen concentration variations with position and time in a closed containment compartment with radiolytic hydrogen generation in the water on the compartment floor following a Loss-of-Coolant-Accident (LOCA). One application is to determine the potential difference between the compartment maximum hydrogen concentration and a hydrogen detector reading, due to the detector location. Three possible mechanisms for hydrogen transport in the compartment were investigated: (1) molecular diffusion, (2) possible bubble formation and motion, and (3) natural convection flows. A base case cubic compartment with 6.55-m (21.5-ft) height was analyzed. Parameter studies were used to determine the sensitivity of results to compartment size, hydrogen generation rates, diffusion coefficients, and the temperature difference between the floor and the ceiling and walls of the compartment. Diffusion modeling indicates that if no other mixing mechanism is present for the base case, the maximum hydrogen volume percent (vol percent) concentration difference between the compartment floor and ceiling will be 4.8 percent. It will be 24.5 days before the maximum concentration difference is less than 0.5 percent. Bubbles do not appear to be a potential source of hydrogen pocketing in a containment compartment. Compartment natural convection circulation rates for a 2.8 K (5 0 F) temperature difference between the floor and the ceiling and walls are estimated to be at least the equivalent of 1 compartment volume per hour and probably in the range of 4 to 9 compartment volumes per hour. Related natural convection studies indicate there will be turbulent mixing in the compartment for a 2.8 K (5 0 F) temperature difference between the floor and the ceiling and walls

  13. Estimation of Water Footprint Compartments in National Wheat Production

    Directory of Open Access Journals (Sweden)

    B. Ababaei

    2016-09-01

    Full Text Available Introduction: Water use and pollution have raised to a critical level in many compartments of the world. If humankind is to meet the challenges over the coming fifty years, the agricultural share of water use has to be substantially reduced. In this study, a modern yet simple approach has been proposed through the introduction concept ‘Water Footprint’ (WF. This concept can be used to study the connection between each product and the water allocation to produce that product. This research estimates the green, blue and gray WF of wheat in Iran. Also a new WF compartment (white is used that is related about irrigation water loss. Materials and Methods: The national green (Effective precipitation, blue (Net irrigation requirement, gray (For diluting chemical fertilizers and white (Irrigation water losses water footprints (WF of wheat production were estimated for fifteen major wheat producing provinces of Iran. Evapotranspiration, irrigation requirement, gross irrigation requirement and effective rainfall were got using the AGWAT model. Yields of irrigated and rain-fed lands of each province were got from Iran Agricultural-Jihad Ministry. Another compartment of the wheat production WF is related about the volume of water required to assimilate the fertilizers leached in runoff (gray WF. Moreover, a new concept of white water footprint was proposed here and represents irrigation water losses, which was neglected in the original calculation framework. Finally, the national WF compartments of wheat production were estimated by taking the average of each compartment over all the provinces weighted by the share of each province in total wheat production of the selected provinces. Results and Discussion: In 2006-2012, more than 67% of the national wheat production was irrigated and 32.3% were rain-fed, on average, while 37.9% of the total wheat-cultivated lands were irrigated and 62.1% was rain-fed from more than 6,568 -ha. The total national WF of

  14. Multi-compartment iodine calculations with FIPLOC/IMPAIR

    International Nuclear Information System (INIS)

    Ewig, F.; Allelein, H.J.; Schwarz, S.; Weber, G.

    1996-01-01

    The multi-compartment containment code FIPLOC for the simulation of severe accidents in LWR plants was extended by the integration of the iodine model IMPAIR-3. The iodine model which originally was only drafted for chains of compartments was changed for arbitrary compartment configurations and tightly coupled to the thermal hydraulic part. A main progress with the coupled version FIPLOC-3.0 is the sophisticated modelling of the aerosol iodine behaviour. In a PWR accident the mass of iodine is mainly released in form of CsI aerosol from the primary circuit. In IMPAIR-3 the aerosol behaviour of the species CsI, AgI and IO 3 - is modelled in a very simplified way causing large uncertainties in the calculated distributions. The behaviour of these three aerosol species is treated by the aerosol model MAEROS/MGA. Agglomeration, particle growth by condensation and all deposition processes are calculated. The solubility effect for the hygroscopic species CsI and IO 3 - are comprehended. Furthermore the impact of the iodine decay heat on the thermal hydraulic behaviour is considered. In order to test the code development a preliminary FIPLOC-3.0 calculation was done simulating a German PWR containment for the core melt scenario ND* according to the German risk study phase B. IN the calculation a contact of the core melt with the sump water was assumed and the containment vent line was opened after 70 hours. The result show that the different iodine species are distributed inhomogeneously within the containment. The CsI-aerosol concentrations differ by two orders of magnitude and the I 2 -concentration even by three orders of magnitude. Most of the iodine is assumed to be released as CsI aerosol out of the primary circuit. Since it fastly deposits its contribution to the release into the environment is minor. CsI is however dissolved in the sump, where mainly the gaseous I 2 is created which can react in the containment atmosphere to IO 3 - . (author) 11 figs., 3 tabs., 12

  15. Pediatric Nonfracture Acute Compartment Syndrome: A Review of 39 Cases.

    Science.gov (United States)

    Livingston, Kristin; Glotzbecker, Michael; Miller, Patricia E; Hresko, Michael T; Hedequist, Daniel; Shore, Benjamin J

    2016-01-01

    Compartment syndrome in the absence of fracture is rare and poorly described within the pediatric literature. The purpose of this study was to report the varying etiologies, risk factors, and treatment outcomes associated with pediatric nonfracture acute compartment syndrome (NFACS). We conducted a retrospective chart review on 37 children who suffered a NFACS and were treated at a single pediatric trauma center between 1997 and 2013. Demographic, diagnostic, treatment, and outcome characteristics were reviewed. Five causal groups were generated: trauma, exercise related (acute presentation after exercise without trauma), infectious, vascular, and postoperative (in the absence of osteotomy). Univariate and multivariate analyses were performed to identify risk factors of NFACS. P-values 39 cases of NFRCS in 37 children [6 females, 31 males, mean age of 11.7 y (SD+7.2 y)]. The leg was the most commonly involved limb (29 cases, 74%). Diagnosis of NFRCS was made either by compartment pressure monitoring [59%, 23/39 cases, mean pressure 66 mm Hg (SD+28)] or by clinical examination. According to etiology, vascular was most common (11/39, 28%), followed by trauma (10/39, 26%) and postoperative (8/39, 21%), with exertion and infection representing a small proportion (6/39, 15% and 4/39, 10%, respectively). Pain was present in 33 cases (85%), swelling in 28 cases (72%), paresthesias in 13 cases (33%), motor deficit in 12 cases (31%), and poor perfusion in 11 cases (28%). Average time from symptom onset to diagnosis was 48 hours (IQR, 9 to 96 h). At surgery, 21 patients (54%) had evidence of myonecrosis. Children required an average of 3 surgeries for wound closure. The median time to follow-up was 232 days (IQR, 73 to 608 d). A total of 54% made a full recovery, whereas 31% suffered a persistent neurological or functional deficit. NFACS in children is associated with a delay in diagnosis and a high rate of myonecrosis. Timely assessment with high clinical suspicion is

  16. [Bacterial biofilms on PVC tubing's inner surface of hemodialysis water treatment system].

    Science.gov (United States)

    Yang, Sha; Jia, Ke; Peng, Youming; Liu, Hong; Liu, Yinghong; Chen, Xing; Liu, Fuyou

    2009-10-01

    To determine the morphology, bacteria and endotoxin content of biofilms on the inner surface of PVC tubes in hemodialysis water treatment system. We dissolved biofilms of segments before and after reverse osmosis machine for bacterial count and identification. We studied biofilm structure of segments before and after reverse osmosis machine with eyes and scanning electron microscope. Biofilms of all 7 segments were dissolved for qualitative and quantitative assay of endotoxin. The inner surface of segment before reverse osmosis machine was homogeneously distributed with activated carbon powder deposition. The segment after reverse osmosis machine was normal. With scanning electron microscope, biofilm with successive surface and sandwich was found on the inner surface of segment before reverse osmosis machine, formed by clustering bacillus, activated carbon powder and some coccus. Bacteria of the same shape and length were found on segment after reverse osmosis machine, but fewer and looser. Bacterial culture and identification showed the former was mostly gram-negative bacillus, the latter was only a few micrococcus. Endotoxin of biofilm was between 2.0 EU/mL and 4.0 EU/mL. Quantitative assay showed: segment after softener (2.821+/-0.807) EU/mL; segment after active charcoal canister(3.635+/-0.427) EU/mL; segment before reverse osmosis machine (3.687+/-0.271) EU/mL; segment after reverse osmosis machine (2.041+/-0.295) EU/mL; exit of power pump (1.983+/-0.390)EU/mL;the 1st dead space (2.373+/-0.535) EU/mL; and the 2nd dead space (2.858+/-0.690)EU/mL. Biofilms are found on the inner surface of segment before and after reverse osmosis machine. Endotoxin level from high to low is as follows: segment before reverse osmosis machine, segment after active charcoal canister, the 2nd dead space, segment after softener, the 1st dead space, segment after reverse osmosis machine, exit of power pump. The character of the bacteria and endotoxin of the biofilm can help us find

  17. Sensitivity of CIPS-computed PVC location to measurement errors in ECG electrode position: the need for the 3D camera.

    Science.gov (United States)

    van Dam, Peter M; Gordon, Jeffrey P; Laks, Michael

    2014-01-01

    The Cardiac Isochrone Positioning System (CIPS) is a non-invasive method able to localize the origins of PVCs, VT and WPW from the 12 lead ECG. The CIPS model integrates a standard 12-lead ECG with an MRI derived model of the heart, lungs, and torso in order to compute the precise electrical origin of a PVC from within the myocardium. To make these calculations, CIPS uses virtually represented ECG electrode positions. These virtual electrode positions, however, are currently assumed to represent the standard 12 lead positions in the model without taking into account the actual, anatomical locations on a patient. The degree of error introduced into the CIPS model by movement of the virtual electrodes is unknown. Therefore, we conducted a model-based study to determine the sensitivity of CIPS to changes in its virtually represented ECG electrode positions. Previously, CIPS was tested on 9 patients undergoing PVC ablation, producing a precise myocardial PVC location for each patient. These initial results were used as controls in two different simulation experiments. The first moved all virtual precordial leads in CIPS simultaneously up and down to recalculate a PVC origin. The second moved each virtual precordial lead individually, using 8 points on multiple concentric circles of increasing radius to recalculate a PVC origin. The distance of the newly calculated PVC origin from the control origin was used as a metric. Moving either all electrodes simultaneously or each V1-6 precordial electrode independently resulted in non-linear and unpredictable shifts of the CIPS-computed PVC origin. Simultaneously moving all V1-6 precordial electrodes by 10mm increments produced a shift in CIPS-computed PVC origin between 0 and 62mm. Independently moving an electrode, a shift of more than 10mm resulted in an unpredictable CIPS-computed PVC origin relocation between 0 and 40mm. The effect of moving the virtual electrodes on CIPS modeling more pronounced the closer the virtual

  18. Idiopathic Acute Isolated Lateral Compartment Syndrome of a Lower Leg: A Magnetic Resonance Imaging Case Report

    Energy Technology Data Exchange (ETDEWEB)

    Yeom, Dong Heon; Lee, Ji Hae; Cho, Woo Ho; Kim, Jae Hyung; Jeong, Myeong Ja; Kim, Soung Hee; Kim, Ji Young; Kim, Soo Hyun; Kang, Mi Jin; Lee, Han Bee [Dept. of Radiology, Sanggye Paik Hospital, Inje University College of Medicine, Seoul (Korea, Republic of); Bae, Kyung Eun [Dept. of Radiology, Seoul Asan Hospital, Ulsan University College of Medicine, Seoul (Korea, Republic of)

    2013-01-15

    Acute compartment syndrome of the lower leg is usually associated with major trauma such as fracture, and most commonly occurs in the anterior or deep posterior compartments. Isolated lateral compartment syndrome is less typical and usually associated with minor trauma or exertion. There are a few reports of the acute compartment syndrome which develops without an obvious cause. However, there are few reports of idiopathic acute isolated lateral compartment syndrome, and there are no reports of the radiologic findings. This study presents a radiologic finding of idiopathic acute isolated lateral compartment of lower leg, which shows localized enlargement of the peroneal muscles with peripheral convex bowing and change of their signal intensity with fluid signal along the adjacent fascial planes on magnetic resonance imaging.

  19. The anammoxosome: an intracytoplasmic compartment in anammox bacteria.

    Science.gov (United States)

    van Niftrik, Laura A; Fuerst, John A; Sinninghe Damsté, Jaap S; Kuenen, J Gijs; Jetten, Mike S M; Strous, Marc

    2004-04-01

    Anammox bacteria belong to the phylum Planctomycetes and perform anaerobic ammonium oxidation (anammox); they oxidize ammonium with nitrite as the electron acceptor to yield dinitrogen gas. The anammox reaction takes place inside the anammoxosome: an intracytoplasmic compartment bounded by a single ladderane lipid-containing membrane. The anammox bacteria, first found in a wastewater treatment plant in The Netherlands, have the potential to remove ammonium from wastewater without the addition of organic carbon. Very recently anammox bacteria were also discovered in the Black Sea where they are responsible for 30-50% of the nitrogen consumption. This review will introduce different forms of intracytoplasmic membrane systems found in prokaryotes and discuss the compartmentalization in anammox bacteria and its possible functional relation to catabolism and energy transduction.

  20. Distribution of perfluorinated compounds in blood compartments during prenatal exposure

    DEFF Research Database (Denmark)

    Nielsen, Flemming; Weihe, Pál; Grandjean, Philippe

    Perfluorinated compounds (PFCs) are a class of persistent environmental toxicants widely used in industrial and consumer products due to their unique chemical and physical properties. Knowledge on the health effects in humans is sparse and have most often been studied only for PFOS and PFOA......, but use of other PFCs are emerging, not at least after restriction of PFOS in the Stockholm Convention. Knowledge of prenatal exposure, and distribution between blood compartments for a wider range of PFCs in humans is therefore needed. We present prenatal exposure data for 19 perfluorinated organic...... carboxylic acids (PFCAs) and perfluoroalkyl sulfonates (PFSAs) ranging from C4-C12, as well as perfluorooctanesulfonamides (FOSAs) and perfluorooctanesulfonamidoacetic acids (FOSAAs). Maternal and foetal levels were significantly correlated for nearly all PFCs with median concentrations in cord serum ranging...