WorldWideScience

Sample records for pressurised equipment les

  1. Skills of Asn inspectors responsible for inspecting pressurised equipment

    International Nuclear Information System (INIS)

    Colonna, F.

    2010-01-01

    ASN relies on the unique competencies of its staff to assure that it can complete its mission of maintaining public health and safety. Since 1975, personnel at ASN Nuclear Pressure Equipment Department have played a major role in the oversight of pressure boundary equipment by verifying that equipment is manufactured in compliance with regulatory requirements. This has called for highly competent individuals trained in a variety of technical and regulatory backgrounds. ASN is meeting the challenge of keeping its staff trained and prepared to continue its oversight of nuclear boilers. This has included ensuring that its organization is welt suited to meet the demands, and relying on third-party experts when necessary. With the implementation of the 2006 transparency law, ASN has taken necessary steps to ensure that it will maintain its high level of expertise going forward. (author)

  2. Inspection of pressurised nuclear equipment by certified organizations

    International Nuclear Information System (INIS)

    Marez, Y.

    2010-01-01

    The A.Q.U.A.P. is a technical association created on the 17 october 1978 grouping control organisms that define methodologies in order to apply the same procedures among their customers. It writes cards to interpret the regulation for organisms, operators and manufacturers. The areas covered by the A.Q.U.A.P. works concern the conformity evaluation of new pressure vessels, qualification of qualification of welding procedures and permanent assemblies and the qualification of the personnel realizing these assemblies, the follow up of the equipment in service. (N.C.)

  3. Towards a strengthening of inspections carried out on pressurised equipment and pipework..

    International Nuclear Information System (INIS)

    Noel, St.

    2010-01-01

    Following the fast presidential election, a major restructuring of the administrative landscape was set in motion. Tasks that historically were the responsibility of the Ministry of Industry are now carried out by the Ministry of Sustainable Development, which in particular is responsible for the whole policy to do with the prevention of technological risks. The General Directorate for the Prevention of Risks (Direction generale de la prevention des risques (DGPR)) of this ministry is now responsible for controlling technological risks, opening up new perspectives in terms of managing accidental risks and offering a new opportunity for an 'integrated' approach, making it possible to deal with an industrial installation in all its facets. Within the DGPR, the Office for the Safety of Industrial Equipment (bureau de la securite des equipements industriels (BSEI)) is responsible for the safety of pressurised equipment, as well as pipes carrying gas, inflammable liquids and chemical products. After a quick presentation of the inspections carried out on this equipment, issues to do with their safety will be dealt with and in particular: - the suitability of inspections carried out in the tight of faults that are likely to occur and develop in the structures; - control of ageing; - management of the quality of new equipment. (author)

  4. Installations having pressurised fluid circuits

    International Nuclear Information System (INIS)

    Rigg, S.; Grant, J.

    1977-01-01

    Reference is made to nuclear installations having pressurised coolant flow circuits. Breaches in such circuits may quickly result in much damage to the plant. Devices such as non-return valves, orifice plates, and automatically operated shut-off valves have been provided to prevent or reduce fluid flow through a breached pipe line, but such devices have several disadvantages; they may present large restrictions to normal flow of coolant, and may depend on the operation of ancillary equipment, with consequent delay in bringing them into operation in an emergency. Other expedients that have been adopted to prevent or reduce reverse flow through an upstream breach comprise various forms of hydraulic counter flow brakes. The arrangement described has at least one variable fluid brake comprising a fluidic device connected into a duct in the pressurised circuit, the device having an inlet, an outlet, a vortex chamber between the inlet and outlet, a control jet for introducing fluid into the vortex chamber, connections communicating the inlet and the outlet into one part of the circuit and the control jet into another region at a complementary pressure so that, in the event of a breach in the circuit in one region, fluid passes from the other region to enter the vortex chamber to stimulate pressure to create a flow restricting vortex in the chamber that reduces flow through the breach. The system finds particular application to stream generating pressure tube reactors, such as the steam generating heavy water reactor at UKAEA, Winfrith. (U.K.)

  5. Pressurised water reactor operation

    International Nuclear Information System (INIS)

    Birnie, S.; Lamonby, J.K.

    1987-01-01

    The operation of a pressurized water reactor (PWR) is described with respect to the procedure for a unit start-up. The systems details and numerical data are for a four loop PWR station of the design proposed for Sizewell-'B', United Kingdom. A description is given of: the initial conditions, filling the reactor coolant system (RCS), heat-up and pressurisation of the RCS, secondary system preparations, reactor start-up, and reactivity control at power. (UK)

  6. Damage caused to houses and equipment by underground nuclear explosions; Degats dus aux explosions nucleaires souterraines sur les habitations et les equipements

    Energy Technology Data Exchange (ETDEWEB)

    Delort, F; Guerrini, C [Commissariat a l' Energie Atomique, Bruyeres-le-Chatel (France). Centre d' Etudes

    1969-07-01

    A description is given of the damaged caused to various structures, buildings, houses, mechanical equipment and electrical equipment by underground nuclear explosions in granite. For each type of equipment or building are given the limiting distances for a given degree of damage. These distances have been related to a parameter characterizing the movement of the medium; it is thus possible to generalize the results obtained in granite, for different media. The problem of estimating the damage caused at a greater distance from the explosion is considered. (authors) [French] Les degats sur diverses structures, constructions, habitations, equipements mecaniques et materiels electriques provoques par des explosions nucleaires souterraines dans le granite sont decrits. On a indique pour chaque type de materiel ou de construction, les distances limites correspondant a un degre de gravite de dommage observe. Ces distances ont ete reliees a un parametre caracterisant le mouvement du milieu, permettant ainsi de generaliser les resultats obtenus dans le granite, a differents milieux. Le probleme de la prevision des degats en zone lointaine a ete aborde. (auteurs)

  7. Spiral: a new equipment for exotic nuclei; Spiral: un nouvel equipement pour les noyaux exotiques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-02-01

    This document presents the GANIL activities and more specially the SPIRAL project. The missions of the GANIL are to allow scientists fundamental researches in Nuclear Physics and to develop applications for heavy ions in other domains. Spiral is an european project, decided by NuPECC (NUclear Physics European Collaboration Committee). It is a first generation equipment allowing the production and the acceleration of light and moderately heavy nuclei at energy range of 2 to 25 MeV/nucleus. (A.L.B.)

  8. Piezoelectric pump and pressurised circuit provided therewith

    NARCIS (Netherlands)

    Van Es, Johannes; Wits, Wessel Willems

    2015-01-01

    A piezoelectric pump for use in a pressurised circuit is provided, comprising a pump chamber (5) with an inlet (6) provided with a one way inlet valve (7), for connection to a feeding line (8) of the pressurised circuit and an outlet (9) provided with a one way outlet valve (10), for connection to a

  9. A monitoring device for pressurised-air-driven diaphragm-based artificial heart assist devices

    NARCIS (Netherlands)

    Hoeben, F.P.; Hoeben, F.P.; de Mul, F.F.M.; Stokkink, J.S.D.; Stokkink, H.S.D.; Koelink, M.H.; Koelink, M.H.; Greve, Jan

    1992-01-01

    A non-invasive device has been developed to monitor the diaphragm position and the blood flow in artificial heart assist devices equipped with a pressurised-air-driven diaphragm. Light scattering from the diaphragm is used as a mechanism for measuring. Information about the position of several

  10. Pressurised water reactor in the UK

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    Since the Three Mile Island accident there has been much debate about the safety considerations of Pressurised Water Reactors. Their development will continue throughout the world but it will be based upon the lessons learned from that unfortunate accident. In the United Kingdom there is a public enquiry discussing all aspects of the reactor. The papers given in this book provide an informed addition to the literature. The design, safety and licensing and construction of a pressurised water reactor system are discussed in detail. Considerations stemming from the Three Mile Island accident are presented

  11. Observations on the electronic equipment employed for making measurements on the pile G1; Observations sur le materiel electronique utilise pour les mesures sur la pile G1

    Energy Technology Data Exchange (ETDEWEB)

    Ailloud, J; Belin, P; Meunier, A; Tarabella, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    The electronic apparatus employed during the manipulations carried out on the pile G1 is briefly described, with the aim of putting on record the inconveniences encountered in the course of the operation of this equipment. (author) [French] On decrit succinctement l'appareillage electronique utilise durant les manipulations effectuees sur la pile G1, dans le but de noter les inconvenients rencontres au cours de l'exploitation de cet appareillage. (auteur)

  12. Comparative Field Tests of Pressurised Rover Prototypes

    Science.gov (United States)

    Mann, G. A.; Wood, N. B.; Clarke, J. D.; Piechochinski, S.; Bamsey, M.; Laing, J. H.

    The conceptual designs, interior layouts and operational performances of three pressurised rover prototypes - Aonia, ARES and Everest - were field tested during a recent simulation at the Mars Desert Research Station in Utah. A human factors experiment, in which the same crew of three executed the same simulated science mission in each of the three vehicles, yielded comparative data on the capacity of each vehicle to safely and comfortably carry explorers away from the main base, enter and exit the vehicle in spacesuits, perform science tasks in the field, and manage geological and biological samples. As well as offering recommendations for design improvements for specific vehicles, the results suggest that a conventional Sports Utility Vehicle (SUV) would not be suitable for analog field work; that a pressurised docking tunnel to the main habitat is essential; that better provisions for spacesuit storage are required; and that a crew consisting of one driver/navigator and two field science crew specialists may be optimal. From a field operations viewpoint, a recurring conflict between rover and habitat crews at the time of return to the habitat was observed. An analysis of these incidents leads to proposed refinements of operational protocols, specific crew training for rover returns and again points to the need for a pressurised docking tunnel. Sound field testing, circulating of results, and building the lessons learned into new vehicles is advocated as a way of producing ever higher fidelity rover analogues.

  13. Equipment for biomass. Wood burners; Materiels pour la biomasse, les chaudieres bois

    Energy Technology Data Exchange (ETDEWEB)

    Chieze, B. [SA Compte R., 63 - Arlanc (France)

    1997-12-31

    A review of the French classification of biomass wastes (and more especially wood and wood wastes) concerning classified burning equipment, is presented: special authorization is thus needed for burning residues from wood second transformation processes. Limits for combustion product emission levels are detailed and their impact on wood burning and process equipment is examined: feeder, combustion chamber, exchanger, fume treatment device, residue disposal. Means for reducing pollutant emissions are reviewed

  14. An improved water cooled nuclear reactor and pressuriser assembly

    International Nuclear Information System (INIS)

    Gardner, F.J.; Strong, R.

    1991-01-01

    A water cooled nuclear reactor is described which comprises a reactor core, a primary water coolant circuit and a pressuriser arranged as an integral unit in a pressure vessel. The pressure vessel is divided into an upper and a lower chamber by a casing. The reactor core and primary water coolant circuit are arranged in the lower chamber and the pressuriser is arranged in the upper chamber. A plurality of spray pipes interconnect a steam space of the pressuriser with the downcomer of the primary water coolant circuit below a heat exchanger. A plurality of surge ports interconnect a water space of the pressuriser with the primary water coolant circuit. The surge ports have hydraulic diodes so that there is a low flow resistance for water from the water space of the pressuriser to the primary water coolant circuit and high flow resistance in the opposite direction. The spray pipes provide a desuperheating spray of cooled water into the pressuriser during positive volume surges of the primary water coolant. The pressuriser arrangement may also be applied to integral water cooled reactors with separate pressurisers and to dispersed pressurised water reactors. The surge ports also allow water to flow by gravity to the core in an emergency. (author)

  15. Pyrometric fuel particle measurements in pressurised reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hernberg, R; Joutsenoja, T [Tampere Univ. of Technology (Finland)

    1997-10-01

    A fibre-optic two-colour pyrometric technique for fuel particle temperature and size measurement is modified and applied to three pressurised reactors of different type in Finland, Germany and France. A modification of the pyrometric method for simultaneous in situ measurement of the temperature and size of individual pulverised coal particles at the pressurised entrained flow reactor of VTT Energy in Jyvaeskylae was developed and several series of measurements were made in order to study the effects of oxygen concentration (3-30 vol%) and pressure (0.2-1.0 MPa) on the particle temperature. The fuels used in the experiments were Westerholt, Polish and Goettelborn hvb coals, Gardanne lignite and Niederberg anthracite. The initial nominal fuel particle size varied in the experiments from 70 to 250 ,{mu}m and the gas temperature was typically 1173 K. For the anthracite also the effects of gas temperature (1073-1423K) and CO{sub 2} concentration (6-80 vol%) were studied. In Orleans a fibreoptic pyrometric device was installed to a pressurised thermogravimetric reactor of CNRS and the two-colour temperatures of fuel samples were measured. The fuel in the experiments was pulverised Goettelborn char. The reliability of optical temperature measurement in this particular application was analysed. In Essen a fibre-optic pyrometric technique that is capable to measure bed and fuel particle temperatures was applied to an atmospheric fluidised bed reactor of DMT. The effects of oxygen concentration (3-8 vol%) and bed temperature (1123-1193 K) on the fuel particle temperature were studied. The fuels in these were Westerholt coal and char and EBV-coal. Some results of these measurements are presented. The project belonged to EU`s Joule 2 extension research programme (contract JOU2-CT93-0331). (orig.)

  16. Characterisation of fuels for advanced pressurised combustion

    Energy Technology Data Exchange (ETDEWEB)

    Zevenhoven, R; Hupa, M; Backman, P; Forssen, M; Karlsson, M; Kullberg, M; Sorvari, V; Uusikartano, T [Aabo Akademi, Turku (Finland). Combustion Chemistry Research Group; Nurk, M [Tallinskij Politekhnicheskij Inst., Tallinn (Estonia)

    1997-10-01

    The objective of the research was to determine a set of fuel characteristics which quantify the behaviour of a fuel in a typical pressurised combustor or gasifier environment, especially in hybrid processes such as second generation PFBC. One specific aspect was to cover a wide range of fuels, including several coal types and several grades of peat and biomasses: 7 types of coal, 2 types of peat, 2 types of wood, 2 types of black liquor, Estonian oil shale and Venezuelan Orimulsion were studied. The laboratory facilities used are a pressurised thermogravimetric reactor (PTGR), a pressurised grid heater (PGH) and an atmospheric entrained flow quartz tube reactor, with gas analysis, which can be operated as a fixed bed reactor. A major part of the work was related to fuel devolatilisation in the PGH and sequential devolatilisation and char gasification (with carbon dioxide or steam) in the PTGR. The final part of that work is reported here, with the combustion of Estonian oil shale at AFBC or PFBC conditions as additional subject. Devolatilisation of the fuels at atmospheric pressure in nitrogen while monitoring gaseous exhausts, followed by ultimate analysis of the chars has been reported earlier. Here, results on the analysis of the reduction of NO (with and without CO) on chars at atmospheric pressure in a fixed bed reactor are reported. Finally, a comparison is given between experimental results and direct numerical simulation with several computer codes, i.e. PyroSim, developed at TU Graz, Austria, and the codes Partikkeli, Pisara and Cogas, which were provided by VTT Energy, Jyvaeskylae

  17. Pyrometric fuel particle measurements in pressurised reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hernberg, R.; Joutsenoja, T. [Tampere Univ. of Technology (Finland)

    1996-12-01

    A fiberoptic two-colour pyrometric technique for fuel particle temperature and size measurement is modified and applied to three pressurized reactors of different type in Finland, Germany and France. A modification of the pyrometric method for simultaneous in situ measurement of the temperature and size of individual pulverized coal particles at the pressurized entrained flow reactor in Jyvaeskylae was developed and several series of measurements were made. In Orleans a fiberoptic pyrometric device was installed to a pressurised thermogravimetric reactor and the two-colour temperatures of fuel samples were measured. Some results of these measurements are presented. The project belongs to EU`s Joule 2 extension research programme. (author)

  18. Gasification of sawdust in pressurised internally circulating fluidized bed

    Energy Technology Data Exchange (ETDEWEB)

    Maartensson, R.; Lindblom, M. [Lund Univ. (Sweden). Dept. of Chemical Engineering

    1996-12-31

    A test plant for pressurised gasification of biofuels in a internally circulating fluidized bed has been built at the department of Chemical Engineering II at the University of Lund. The design performance is set to maximum 20 bar and 1 050 deg C at a thermal input of 100 kW or a maximum fuel input of 18 kg/in. The primary task is to study pressurised gasification of biofuels in relation to process requirements of the IGCC concept (integrated gasification combined cycle processes), which includes studies in different areas of hot gas clean-up in reducing atmosphere for gas turbine applications. (orig.)

  19. Gasification of sawdust in pressurised internally circulating fluidized bed

    Energy Technology Data Exchange (ETDEWEB)

    Maartensson, R; Lindblom, M [Lund Univ. (Sweden). Dept. of Chemical Engineering

    1997-12-31

    A test plant for pressurised gasification of biofuels in a internally circulating fluidized bed has been built at the department of Chemical Engineering II at the University of Lund. The design performance is set to maximum 20 bar and 1 050 deg C at a thermal input of 100 kW or a maximum fuel input of 18 kg/in. The primary task is to study pressurised gasification of biofuels in relation to process requirements of the IGCC concept (integrated gasification combined cycle processes), which includes studies in different areas of hot gas clean-up in reducing atmosphere for gas turbine applications. (orig.)

  20. Different types of superconductors: their effect on equipment design. Les differents types de supraconducteurs: influence sur la conception des materiels

    Energy Technology Data Exchange (ETDEWEB)

    Ansart, A; Manuel, P [Electricite de France (EDF); Fevrier, A [Compagnie Generale d' Electricite (CGE), 91 - Marcoussis (FR)

    1989-01-01

    Development of superconductors for AC current and of higher critical temperature superconducting materials enlarged the field of research in cryoelectrotechnic. The paper discusses the materials characteristics in relation with the functional needs in the equipments. Are reviewed the main points governing conductor design for a given application, the characteristics and manufacturing technics for different superconducting materials. It is shown how lighter, smaller equipments can be designed as well as new ones for functions not covered with present apparatus. 17 refs.

  1. Combustion and environment. The answers from the energy and equipment suppliers; Combustion et environnement. Les reponses des fournisseurs d`energie et d`equipements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This paper is a reprint of an article published in `Energie Plus` magazine which questions the capability of commercial fuels and combustion equipments (central heating plants, burners, turbines and engines) available today of respecting the limit values of pollutant emissions (SO{sub x}, NO{sub x}, CO, dusts) of forthcoming regulations. An analysis of the situation is given separately for the fuels (natural gas, coal, heavy fuels) with a stress on the competition aspects, and for the combustion systems (turbines, diesel and gas engines, central heating plants). (J.S.)

  2. Some equipment for graphite research in swimming pool reactors; Quelques dispositifs d'etude du graphite dans les piles piscines

    Energy Technology Data Exchange (ETDEWEB)

    Seguin, M; Arragon, Ph; Dupont, G; Gentil, J; Tanis, G [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    The irradiation devices described are used for research concerning reactors of the natural uranium type, moderated by graphite and cooled by carbon dioxide. The devices are generally designed for use in swimming pool reactors. The following points have been particularly studied: - maximum use of the irradiation volume, - use of the simplest technological solutions, - standardization of certain constituent parts. This standardization calls for precision machining and careful assembling; these requirements are also true when a relatively low irradiation temperature is required and the nuclear heating is pronounced. Finally, the design of these devices is suitable for the irradiation of other fissile or non-fissile materials. (authors) [French] Les dispositifs d'irradiation decrits servent aux etudes relatives a la filiere des reacteurs a uranium naturel, moderes au graphite et refroidis par le gaz carbonique. Ils sont generalement concus pour etre utilises dans des piles piscines. L'accent a ete mis sur: - l'utilisation au maximum du volume d'irradiation, - le recours aux solutions technologiques les plus simples, - la standardisation de certaines parties constitutives. Cette standardisation impose un usinage precis et un montage soigne, lesquels sont egalement necessaires lorsqu'on doit obtenir une temperature d'irradiation relativement basse alors que l'echauffement nucleaire est important. Enfin, la conception de ces dispositifs est valable pour irradier d'autres materiaux non fissiles ou fissiles. (auteurs)

  3. Force-deflection analysis of offset indentations on pressurised pipes

    International Nuclear Information System (INIS)

    Hyde, T.H.; Luo, R.; Becker, A.A.

    2007-01-01

    The indenter force vs. deflection characteristics of pressurised pipes with long offset indentations under plane strain conditions have been investigated using finite element (FE) and analytical methods with four experimental tests performed on aluminium rings. Two different materials and five different geometries were used to investigate their effects on the elastic-plastic behaviour. A comparison of the experimental, FE and the analytical results indicates that the analytical formulation developed in this paper, for predicting the force-deflection curves for pressurised pipes with offset indenters, is reasonably accurate. Also, all of the analyses presented in this paper indicate that by using a representative flow stress, which is defined as the average of the yield and ultimate tensile stresses, the analytical method can accurately predict the force-deflection curves

  4. Plasma assisted measurements of alkali metal concentrations in pressurised combustion processes

    Energy Technology Data Exchange (ETDEWEB)

    Hernberg, R; Haeyrinen, V [Tampere Univ. of Technology (Finland)

    1997-10-01

    In this project the continuous alkali measurement method plasma excited alkali resonance line spectroscopy (PEARLS) was developed, tested and demonstrated in pressurised combustion facilities. The PEARLS method has been developed at Tampere University of Technology (TUT). During 1994-1996 the PEARLS method was developed from the laboratory level to an industrial prototype. The alkali measuring instrument has been tested and used for regular measurements in four different pressurised combustion installations ranging up to industrial pilot scale. The installations are: (1) a pressurised entrained flow reactor (PEFR) at VTT Energy in Jyvaeskylae, Finland (2) a pressurised fluidised bed combustion facility, called FRED, at DMT in Essen, Germany. (3) a 10 MW pressurised circulating fluidised bed combustion pilot plant at Foster Wheeler Energia Oy in Karhula, Finland (4) PFBC Research Facility at ABB Carbon in Finspaang, Sweden

  5. Gaseous emissions in pressurised fluidised-bed combustion. Analysis and summary of the pilot experiments

    International Nuclear Information System (INIS)

    Korpela, T.; Hippinen, I.; Konkola, M.

    1996-01-01

    The influence of operating conditions on gaseous emissions in pressurised fluidised-bed combustion have been studied. The research objectives have been behaviour of sulphur absorbents and reduction of sulphur dioxide emissions, reduction of nitrogen oxide emissions, release of vapour-phase alkalimetals and carbon monoxide emissions. The sulphur capture capacities of calcium-based sorbents under PFBC conditions have been studied at a pressurised fluidised-bed reactor and at a pressurised thermogravimetric apparatus. The project has also connected results of the experimental PFBC at HUT/EVO. (author)

  6. Role of pressuriser in enhancing pressure control system capability in primary system of 500 MWe PHWR

    Energy Technology Data Exchange (ETDEWEB)

    Walia, M P.S.; Misri, Vijay; Bapat, C N; Sharma, V K [Nuclear Power Corporation, Bhabha Atomic Research Centre, Mumbai (India)

    1994-06-01

    The primary heat transport system of a pressurized heavy water reactor (PHWR) extracts and transports the heat produced in the fuel (located inside coolant channel assemblies) to the steam generators where steam is generated to run the turbo-generator. The heat transport medium (primary coolant) is heavy water which is kept in a pressurized liquid state with the help of a pressure control system. Feed and bleed circuits with associated equipment of PHT main system have traditionally constituted the pressure control system. However, for large size reactors of 500 MWe capacity, a surge tank known as pressurizer was incorporated due to the presence of relatively large inventory in PHT main circuit. The pressurizer acts as a cushion for pressure variations resulting from various transients. This significantly reduces the onerous demand on feed and bleed system, thereby reducing reactor outages on system pressure excursions. The paper describes in detail the pressure control system of 500 MWe PHWR involving pressuriser and feed and bleed system including their functions and instrumentation. The results of mathematical modelling/analysis undertaken to establish the response adequacy of pressure control system, to postulated plant transients vis-a-vis the role of pressurizer are presented. (author). 10 figs.

  7. Synthesis of the IRSN report on the issue of severe accidents which may occur on operating pressurised water nuclear reactors

    International Nuclear Information System (INIS)

    2008-01-01

    While containing other related documents (expert report, mail), this synthetic report analyses and comments some aspects of the assessment and treatment of severe accidents by EDF in its operating PWRs (pressurised water nuclear reactors). These aspects are: the EDF referential related to severe accidents (objectives of consequence limitation and prevention, long term management, probabilistic objectives, radiological objectives, expected performance of equipment and systems), the re-assessment of the 'S3 reference source term' which corresponds to a typical discharge (selection of representative scenarios, new approach based on waste categorization, the taking into account of various species, components and systems), the water management in the reactor tank (risks of explosion, of critical corium level, etc.), the strategy of an anticipated opening of the containment envelope venting-filtration device in order to avoid a core fusion, and the risk associated by a cesspool filling-in by debris

  8. Evolution of Surface Nanopores in Pressurised Gyrospun Polymeric Microfibers

    Directory of Open Access Journals (Sweden)

    U. Eranka Illangakoon

    2017-10-01

    Full Text Available The selection of a solvent or solvent system and the ensuing polymer–solvent interactions are crucial factors affecting the preparation of fibers with multiple morphologies. A range of poly(methylmethacrylate fibers were prepared by pressurised gyration using acetone, chloroform, N,N-dimethylformamide (DMF, ethyl acetate and dichloromethane as solvents. It was found that microscale fibers with surface nanopores were formed when using chloroform, ethyl acetate and dichloromethane and poreless fibers were formed when using acetone and DMF as the solvent. These observations are explained on the basis of the physical properties of the solvents and mechanisms of pore formation. The formation of porous fibers is caused by many solvent properties such as volatility, solubility parameters, vapour pressure and surface tension. Cross-sectional images show that the nanopores are only on the surface of the fibers and they were not inter-connected. Further, the results show that fibers with desired nanopores (40–400 nm can be prepared by carefully selecting the solvent and applied pressure in the gyration process.

  9. Design and Verification of Critical Pressurised Windows for Manned Spaceflight

    Science.gov (United States)

    Lamoure, Richard; Busto, Lara; Novo, Francisco; Sinnema, Gerben; Leal, Mendes M.

    2014-06-01

    The Window Design for Manned Spaceflight (WDMS) project was tasked with establishing the state-of-art and explore possible improvements to the current structural integrity verification and fracture control methodologies for manned spacecraft windows.A critical review of the state-of-art in spacecraft window design, materials and verification practice was conducted. Shortcomings of the methodology in terms of analysis, inspection and testing were identified. Schemes for improving verification practices and reducing conservatism whilst maintaining the required safety levels were then proposed.An experimental materials characterisation programme was defined and carried out with the support of the 'Glass and Façade Technology Research Group', at the University of Cambridge. Results of the sample testing campaign were analysed, post-processed and subsequently applied to the design of a breadboard window demonstrator.Two Fused Silica glass window panes were procured and subjected to dedicated analyses, inspection and testing comprising both qualification and acceptance programmes specifically tailored to the objectives of the activity.Finally, main outcomes have been compiled into a Structural Verification Guide for Pressurised Windows in manned spacecraft, incorporating best practices and lessons learned throughout this project.

  10. Transient dynamic crack propagation in gas pressurised pipelines

    International Nuclear Information System (INIS)

    Caldis, E.S.; Owen, D.R.J.; Taylor, C.

    1983-01-01

    The prime limitation of dynamic fracture analysis is the lack of a fundamental crack advance theory which can be easily and economically adopted for use with numerical models. The necessity for the inclusion of inertia effects in the solution of certain problem classes is now evident, but most transient dynamic fracture models considered to date include (of necessity) some intuitive/empirical parameters with a frequent need of a priori knowledge of experimental solutions. The particular problem considered in this study is Mode I transient dynamic crack propagation in gas pressurised pipelines. The steel pipe is modelled using thin shell Semiloof finite elements and its transient response is coupled to a one-dimensional finite element model of the compressible gas equations, incorporating a lateral gas flow parameter. The pipe is governed by the usual dynamic equilibrium equation which is discretised in the time domain by a central difference explicit algorithm. The compressible gas response is modelled by the Continuity and Momentum equations and time discretisation is performed by means of a fully backward difference scheme in time. (orig./GL)

  11. Heat and mass transfer in air-fed pressurised suits

    International Nuclear Information System (INIS)

    Tesch, K.; Collins, M.W.; Karayiannis, T.G.; Atherton, M.A.; Edwards, P.

    2009-01-01

    Air-fed pressurised suits are used to protect workers against contamination and hazardous environments. The specific application here is the necessity for regular clean-up maintenance within the torus chamber of fusion reactors. The current design of suiting has been developed empirically. It is, therefore, very desirable to formulate a thermo-fluids model, which will be able to define optimum designs and operating parameters. Two factors indicate that the modelling should be as comprehensive as possible. Firstly, the overall thermo-fluids problem is three-dimensional and includes mass as well as heat transfer. The fluid field is complex, bounded on one side by the human body and on the other by what may be distensible, porous and multi-layer clothing. In this paper, we report firstly the modelling necessary for the additional mass and heat transport processes. This involves the use of Fick's and Fourier's laws and conjugate heat transfer. The results of an initial validation study are presented. Temperatures at the outlet of the suits were obtained experimentally and compared with those predicted by the overall CFD model. Realistic three-dimensional geometries were used for the suit and human body. Calculations were for turbulent flow with single- and two-component (species) models

  12. Assessment of RANS CFD modelling for pressurised thermal shock analysis

    International Nuclear Information System (INIS)

    Sander M Willemsen; Ed MJ Komen; Sander Willemsen

    2005-01-01

    Full text of publication follows: The most severe Pressurised Thermal Shock (PTS) scenario is a cold water Emergency Core Coolant (ECC) injection into the cold leg during a LOCA. The injected ECC water mixes with the hot fluid present in the cold leg and flows towards the downcomer where further mixing takes place. When the cold mixture comes into contact with the Reactor Pressure Vessel (RPV) wall, it may lead to large temperature gradients and consequently to high stresses in the RPV wall. Knowledge of these thermal loads is important for RPV remnant life assessments. The existing thermal-hydraulic system codes currently applied for this purpose are based on one-dimensional approximations and can, therefore, not predict the complex three-dimensional flows occurring during ECC injection. Computational Fluid Dynamics (CFD) can be applied to predict these phenomena, with the ultimate benefit of improved remnant RPV life assessment. The present paper presents an assessment of various Reynolds Averaged Navier Stokes (RANS) CFD approaches for modeling the complex mixing phenomena occurring during ECC injection. This assessment has been performed by comparing the numerical results obtained using advanced turbulence models available in the CFX 5.6 CFD code in combination with a hybrid meshing strategy with experimental results of the Upper Plenum Test Facility (UPTF). The UPTF was a full-scale 'simulation' of the primary system of the four loop 1300 MWe Siemens/KWU Pressurised Water Reactor at Grafenrheinfeld. The test vessel upper plenum internals, downcomer and primary coolant piping were replicas of the reference plant, while other components, such as core, coolant pump and steam generators were replaced by simulators. From the extensive test programme, a single-phase fluid-fluid mixing experiment in the cold leg and downcomer was selected. Prediction of the mixing and stratification is assessed by comparison with the measured temperature profiles at several locations

  13. Combustion and regulations. Impacts of new regulations on medium-power thermal equipment (boilers, engines, turbines, dryers and furnaces); Combustion et reglementation. Incidences des nouvelles reglementations sur les equipements thermiques de moyenne puissance (chaudieres, moteurs, turbines, secheurs et fours)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This conference is composed of 20 papers on the influence of French and European new pollution regulations on medium size thermal equipment such as boilers, engines, turbines, dryers and furnaces. It is discussed what is going to change with new regulations, how they will apply to existing plants, what will be the impact on future equipment costs. The evolution of energy suppliers and equipment manufacturers facing these new regulations is also examined: fuel substitution, improvements in turbines and engines with water injection and special chambers, diesel engine control, lean mixtures and electronic control for gas engines... Means for reducing SOx, NOx and ash emission levels in boilers are also examined

  14. Role of research and development in life management programme and upgradation of safety of Indian Pressurised Heavy Water Reactors

    International Nuclear Information System (INIS)

    Rupani, B.B.; Vijayan, P.K.; Rama Rao, A.; Sinha, R.K.

    2009-01-01

    At present, India has a fleet of thirteen small size 220 MWe Pressurised Heavy Water Reactors (PHWRs) and two medium size 540 MWe PHWRs. Reactor Engineering Division (RED) of Bhabha Atomic Research Centre (BARC) has pursued multi-faceted Research and Development programmes to support each phase of PHWR i.e. design, construction, commissioning, operation, maintenance, In-Service Inspection, repair and replacement and life extension, This programme is mainly related to life management of coolant channels, development of tooling and techniques for In-service Inspection of coolant channels, development of repair and replacement technology for coolant channels and moderator system, In-house development of technology and equipments like rolled joints to joint dissimilar metals and lancing equipment for steam generator and state-of art diagnostic systems for trouble shooting critical operating systems. The strong R and D support provided in the programme has significantly contributed towards safe operation of PHWRs. This paper gives the highlights of the major activities in above areas with their end uses and capability. (author)

  15. Pressurisation of IP-SOFC technology for second generation hybrid application

    Energy Technology Data Exchange (ETDEWEB)

    Jones, L.

    2005-07-01

    The Integrated Planar Solid Oxide Fuel Cell (IP-SOFC) technology developed by Rolls-Royce plc is a hybrid fuel cell technology considered highly suitable for the distributed power generation market. This report presents the results of a project to examine the technical viability of the IP-SOFC technology and some of the associated hybrid system component technologies under pressurised conditions and to investigate the validity of the predicted pressurisation phenomena. The work included: identification of critical material specifications, construction processes, control parameters, etc; the design and commissioning of two pressurised IP-SOFC test rigs at Rolls Royce in Derby; testing two multi-bundle strips at high temperature and atmospheric pressure; testing an active IP-SOFC bundle at high temperature and pressure; testing an experimental steam reforming unit at high temperature and pressure; testing a novel low pressure drop, off-gas combustor concept under atmospheric and pressurised conditions; design studies to identify key parameters affecting the successful integration and packaging of the fuel cell stack with certain associated hybrid components; and designing a hybrid system experimental verification rig. Significant progress was made in addressing the development challenges associated with the IP-SOFC of leakage, performance, durability, yield and geometry, the reaction rate of steam reforming and emissions from the off-gas combustor. Recommendations for future work are made.

  16. Quantification of four ionophores in soil, sediment and manure using pressurised liquid extraction

    DEFF Research Database (Denmark)

    Bak, Søren Alex; Hansen, Martin; Pedersen, Kenneth Munk

    2013-01-01

    A multi-residue pressurised liquid extraction (PLE) methodology has been established for the determination of the four ionophores: lasalocid, monensin, salinomycin and narasin in solid environmental matrices. The PLE methodology is combined with solid phase extraction as clean-up using liquid...

  17. Determination of pharmaceuticals in environmental and biological matrices using pressurised liquid extraction--are we developing sound extraction methods?

    DEFF Research Database (Denmark)

    Runnqvist, Hannah; Bak, Søren Alex; Hansen, Martin

    2010-01-01

    Pressurised liquid extraction (PLE) is now a well established and extensively applied extraction technique in environmental analysis for pollutants such as persistent organic pollutants (POPs). During the past decade, an emerging group of environmentally interesting analytes are pharmaceuticals...

  18. Resistance welding equipment manufacturing capability for exports

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, V.S.; Raju, Y.S.; Somani, A.K.; Setty, D.S.; Rameswara Raw, A.; Hermantha Rao, G.V.S.; Jayaraj, R.N. [Nuclear Fuel Complex, Dept. of Atomic Energy, Hyderbad (India)

    2010-07-01

    Indian Pressurised Heavy Water Reactor (PHWR) fuel bundle is fully welded and is unique in its design. Appendage welding, end closure welding, and end plate welding is carried out using resistance welding technique. Out of many joining processes available, resistance-welding process is reliable, environment friendly and best suitable for mass production applications. Nuclear Fuel Complex (NFC), an industrial unit is established in Hyderabad, under the aegis of the Dept of Atomic Energy to manufacture fuel for Pressurised Heavy Water Reactors. From inception, NFC has given importance for self-reliance and indigenization with respect to manufacturing process and equipment. Sintering furnaces, centreless grinders, appendage-welding machines, end-closure welding equipment and end-plate welding equipments, which were initially imported, are either indigenized or designed and manufactured in house. NFC has designed, manufactured a new appendage-welding machine for manufacturing 37 element fuel bundles. Recently NFC has bagged an order from IAEA through international bidding for design, manufacture, supply, erection and commissioning of end-closure welding equipment. The paper gives in detail the salient features of these welding equipment. (author)

  19. La decisió artística i les seves condicions de producció: parlant amb un equip de rodatge Artistic Decision-making and its conditions for production: Talking to a TV crew La decisió artística i les seves condicions de producció: parlant amb un equip de rodatge

    Directory of Open Access Journals (Sweden)

    Dafne Muntanyola Saura

    2012-07-01

    Full Text Available

    Em proposo destriar les condicions de producció de la mirada televisiva. La meva tasca sociològica en estudiar les pràctiques i decisions artístiques rau en fer explícits els contextos socials d’aquesta activitat professional. Expliquem aquesta pràctica tant discursiva com pragmática a partir d’una anàlisi de contingut temàtic de 20 entrevistes a participants d’un rodatge televisiu. Amb l’aplicació del programa ATLAS.ti, s’han definit les pràctiques socials que constitueixen el motor de reproducció de la distinció social. Aquesta anàlisi qualitiativa m’ha permès concretar operadors teòrics polivalents com són habitus i capital (Bourdieu, 1979; 1994; 1998, sovint massa ambigus per a ser emprats empíricament. La font de legitimitat de les decisions artístiques prové d’un tipus d’habitus artístic, que hem anomenat habitus televisiu. La dimensió relacional i instrumental del rodatge passa a un segon pla pels entrevistats. En definitiva, contractes de dependència que s’amaguen mitjançant l’exercici de la violència simbòlica quotidiana configuren les identitats professionals del món de la televisió.

    My aim is to explain the production conditions of a TV crew. My sociological task is to study the practices and artistic decision-making in order to make explicit the social contexts of this activity. I will explain these discursive and pragmatic practices with the thematic content analysis of 20 interviews to participants of a TV production set. Thanks to the ATLAS.ti I defined the social practices that make the reproduction of social distinction possible. Qualitative analysis has made polivalent terms such as habitus and capital (Bourdieu, 1979; 1994; 1998, otherwise too ambiguous to be applied empirically, more specific. The legitimacy of artistic decision-making arises from a type of artistic habitus, which we defined as the “TV habitus”. The interviewees consider the relational and

  20. Pressurised combustion of biomass-derived, low calorific value, fuel gas

    Energy Technology Data Exchange (ETDEWEB)

    Andries, J.; Hoppesteyn, P.D.J.; Hein, K.R.G. [Lab. for Thermal Power Engineering, Dept. of Mechanical Engineering and Marine Technology, Delft Univ. of Technology (Netherlands)

    1996-12-31

    The Laboratory for Thermal Power Engineering of the Delft University of Technology is participating in an EU-funded, international R + D project which is designed to aid European industry in addressing issues regarding pressurised combustion of biomass-derived, low calorific flue fuel gas. The objects of the project are: To design, manufacture and test a pressurised, high temperature gas turbine combustor for biomass derived LCV fuel gas; to develop a steady-state and dynamic model describing a combustor using biomass-derived, low calorific value fuel gases; to gather reliable experimental data on the steady-state and dynamic characteristics of the combustor; to study the steady-state and dynamic plant behaviour using a plant layout wich incorporates a model of a gas turbine suitable for operation on low calorific value fuel gas. (orig)

  1. Pressurised combustion of biomass-derived, low calorific value, fuel gas

    Energy Technology Data Exchange (ETDEWEB)

    Andries, J; Hoppesteyn, P D.J.; Hein, K R.G. [Lab. for Thermal Power Engineering, Dept. of Mechanical Engineering and Marine Technology, Delft Univ. of Technology (Netherlands)

    1997-12-31

    The Laboratory for Thermal Power Engineering of the Delft University of Technology is participating in an EU-funded, international R + D project which is designed to aid European industry in addressing issues regarding pressurised combustion of biomass-derived, low calorific flue fuel gas. The objects of the project are: To design, manufacture and test a pressurised, high temperature gas turbine combustor for biomass derived LCV fuel gas; to develop a steady-state and dynamic model describing a combustor using biomass-derived, low calorific value fuel gases; to gather reliable experimental data on the steady-state and dynamic characteristics of the combustor; to study the steady-state and dynamic plant behaviour using a plant layout wich incorporates a model of a gas turbine suitable for operation on low calorific value fuel gas. (orig)

  2. Water relations in silver birch during springtime: How is sap pressurised?

    Science.gov (United States)

    Hölttä, T; Dominguez Carrasco, M D R; Salmon, Y; Aalto, J; Vanhatalo, A; Bäck, J; Lintunen, A

    2018-05-06

    Positive sap pressures are produced in the xylem of birch trees in boreal conditions during the time between the thawing of the soil and bud break. During this period, xylem embolisms accumulated during wintertime are refilled with water. The mechanism for xylem sap pressurization and its environmental drivers are not well known. We measured xylem sap flow, xylem sap pressure, xylem sap osmotic concentration, xylem and whole stem diameter changes, and stem and root non-structural carbohydrate concentrations, along with meteorological conditions at two sites in Finland during and after the sap pressurisation period. The diurnal dynamics of xylem sap pressure and sap flow during the sap pressurisation period varied, but were more often opposite to the diurnal pattern after bud burst, i.e. sap pressure increased and sap flow rate mostly decreased when temperature increased. Net conversion of soluble sugars to starch in the stem and roots occurred during the sap pressurisation period. Xylem sap osmotic pressure was small in comparison to total sap pressure, and it did not follow changes in environmental conditions or tree water relations. Based on these findings, we suggest that xylem sap pressurisation and embolism refilling occur gradually over a few weeks through water transfer from parenchyma cells to xylem vessels during daytime, and then the parenchyma are refilled mostly during nighttime by water uptake from soil. Possible drivers for water transfer from parenchyma cells to vessels are discussed. Also the functioning of thermal dissipation probes in conditions of changing stem water content is discussed. © 2018 German Society for Plant Sciences and The Royal Botanical Society of the Netherlands.

  3. Energy saving potential of energy services - experimentation on the life cycle of energy conversion equipment; Potentiel d'economies d'energie par les services energetiques - application au cycle de vie des equipements de conversion de l'energie

    Energy Technology Data Exchange (ETDEWEB)

    Dupont, M

    2006-12-15

    Energy efficiency services are growing in Europe but their role is still limited. In order to evaluate the potential, we focused first of all on policy, economical and environmental mechanisms that support their development. European natural gas and electricity markets, that are now almost wholly de-regulated, are analysed and compared to their historical structure. By introducing uncertainty on energy prices, this new deal translates better the real energy costs. Energy performance contracts (EPC) limit the impact of these uncertainties on the customer energy bills by guaranteeing a financial result. As a result of the modelling of these contracts, namely operation and maintenance ones, we prove that they transfer technical and financial risks from building owners to energy service companies (ESCO) making energy saving measures easier and less expensive at the same time. These contracts are relatively widespread for heating or compressed-air processes but remain marginal for air-conditioning systems. So new methods were needed to guarantee on the long terms the efficiency of air-conditioning systems demand (1) to master the process and its performances and (2) to be able to determine precisely the energy saving potential and its realisation costs. A detailed energy audit is thus necessary for which we propose a guidance. Conclusions of audits carried out prove that energy saving potential is mainly located in equipment management and control. These optimizations are not always carried out because of a lack of contractual incentive and due to the weaknesses of audit methods. Through the involvement of an independent expert, the mandatory and regular inspection of air-conditioning systems may allow to verify and guide such practices. A three-step analysis procedure has been developed in order to maximize the inspection potential and to get higher benefits from service contracts. (author)

  4. Les aciers inoxydables dans les fixations

    CERN Document Server

    CETIM

    2010-01-01

    Cet ouvrage, qui fait la synthèse de plusieurs travaux menés par le Cetim, propose une vue d'ensemble sur les aciers inoxydables utilisés pour les fixations. Au sommaire : les normes EN, ISO et ATSM qui s'y rapportent , les désignations symboliques , les nuances et caractéristiques mécaniques , les différentes formes de corrosion, les méthodes pour les détecter , les règles du métier , les mises en oeuvre. L'ouvrage comprend plusieurs fiches matériaux et des tableaux qui présentent les équivalences entre les désignations.

  5. Development of a leak-before break procedure for pressurised components

    International Nuclear Information System (INIS)

    Langston, D.B.

    1989-05-01

    For pressurised components there is an increasing interest in the use of leak-before-break arguments to show that defects will behave in a ''failsafe'' manner by growing in such a way as to cause a detectable leak before a disruptive failure of the pressure boundary can occur. The CEGB operates a wide variety of plant and has recognised the need for a flexible leak-before-break procedure which can be applied in a variety of different situations including part-through defects. This paper describes the development of such a procedure and discusses some of the key aspects of the leak-before-break procedure. (author)

  6. Quantification of four ionophores in soil, sediment and manure using pressurised liquid extraction

    DEFF Research Database (Denmark)

    Bak, Søren Alex; Hansen, Martin; Pedersen, Kenneth Munk

    2013-01-01

    A multi-residue pressurised liquid extraction (PLE) methodology has been established for the determination of the four ionophores: lasalocid, monensin, salinomycin and narasin in solid environmental matrices. The PLE methodology is combined with solid phase extraction as clean-up using liquid...... chromatography coupled to tandem mass spectrometry applying electrospray ionisation for detection. The samples were freeze-dried prior to extraction. The absolute recoveries for soil and sediment ranged from 71 to 123% (relative standard deviation (RSDs) below 16%) and in the range 94-133% (RSDs 9...

  7. The velocity of missiles generated by the disintegration of gas-pressurised vessels and pipes

    International Nuclear Information System (INIS)

    Baum, M.R.

    1983-03-01

    A theoretical model is developed to describe the velocity of fragments generated when a gas-pressurised vessel disintegrates. The predictions are compared with new and existing experimental data for spherical and cylindrical vessels and are shown to be an improvement over the widely used empirical correlation developed by Moore. It is also shown that, by an appropriate definition of the energy available for doing work on the fragments, the velocity of the fragments from the disintegration of a section of gas pipeline may be predicted by the same model. (author)

  8. Effects of some structural materials on the reactivity and flux distributions in a pressurised water reactor

    International Nuclear Information System (INIS)

    Mondal, A.M.W.; Mannan, M.A.

    1983-01-01

    The effect of the structural materials of the guide tubes, spacer grids and the shroud on the reactivity and the flux distribution of a Pressurised Water Reactor (PWR) has been studied. Group constants of different cells of guide tubes, spacer grids, shroud and the fuel have been calculated using the cell codes LEOPARD, PANTHER and METHUSELAH. Core calculations have been performed using the diffusion code EQUIPOISE. It has been found for a PWR of 1300 MWe of Kraftwork Union design for Iron that the total change in reactivity due to the presence of guide tubes, spacer grids and the shroud is about -2.48x10 -2 . (author)

  9. Gasification of biomass and coal in a pressurised fluidised bed gasifier

    Energy Technology Data Exchange (ETDEWEB)

    Andries, J; Jong, W de; Hein, K R.G. [Technische Univ. Delft (Netherlands)

    1998-09-01

    During a 3 year (1996-1998) multinational JOULE project, partly funded by the EU, experimental and theoretical research is being done on co-gasification of biomass (pelletised straw and Miscanthus) and coal in a pressurised fluidised bed reactor. The influence of feedstock and operating conditions on gasification characteristics has been studied using a 1.5 MW{sub th} gasifier, which has been operated at a pressure of 5 bar and temperatures up to 900 C. The project and the test rig are described and results obtained in the first part of the project are presented and analysed. (orig.)

  10. Experimental analysis of pressurised humidification tower for humid air gas turbine cycles. Part A: Experimental campaign

    International Nuclear Information System (INIS)

    Pedemonte, A.A.; Traverso, A.; Massardo, A.F.

    2008-01-01

    One of the most interesting methods of water introduction in a gas turbine circuit is represented by the humid air turbine cycle (HAT). In the HAT cycle, the humidification can be provided by a pressurised saturator (i.e. humidification tower or saturation tower), this solution being known to offer several attractive features. This part A is focused on an experimental study of a pressurised humidification tower, with structured packing inside. After a description of the test rig employed to carry out the measuring campaign, the results relating to the thermodynamic process are presented and discussed. The experimental campaign was carried out over 162 working points, covering a relatively wide range of possible operating conditions. Details about measured data are provided in the appendix. It is shown that the saturator's behaviour, in terms of air outlet humidity and temperature, is primarily driven by, in decreasing order of relevance, the inlet water temperature, the inlet water over inlet dry air mass flow ratio and the inlet air temperature. Finally, the exit relative humidity is shown to be consistently over 100%, which may be explained partially by measurement accuracy and droplet entrainment, and partially by the non-ideal behaviour of air-steam mixtures close to saturation

  11. A modelling study of the multiphase leakage flow from pressurised CO{sub 2} pipeline

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Xuejin; Li, Kang [Department of Safety Science Engineering & State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, Anhui 230026 (China); Tu, Ran [College of Mechanical Engineering and Automation, Huaqiao University, Jimei, Xiamen 361000 (China); Yi, Jianxin; Xie, Qiyuan [Department of Safety Science Engineering & State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, Anhui 230026 (China); Jiang, Xi, E-mail: x.jiang@lancaster.ac.uk [Engineering Department, Lancaster University, Lancaster LA1 4YR (United Kingdom)

    2016-04-05

    Highlights: • A simplified model for CO{sub 2} decompression from high pressure pipelines is proposed. • The multiphase fluid was considered as a homogeneous equilibrium mixture. • Different real gas equations of state were incorporated into the model. • Detailed chocked flow calculation with capillary tube assumption was performed. • The model was validated against experimental data with discrepancies discussed. - Abstract: The accidental leakage is one of the main risks during the pipeline transportation of high pressure CO{sub 2}. The decompression process of high pressure CO{sub 2} involves complex phase transition and large variations of the pressure and temperature fields. A mathematical method based on the homogeneous equilibrium mixture assumption is presented for simulating the leakage flow through a nozzle in a pressurised CO{sub 2} pipeline. The decompression process is represented by two sub-models: the flow in the pipe is represented by the blowdown model, while the leakage flow through the nozzle is calculated with the capillary tube assumption. In the simulation, two kinds of real gas equations of state were employed in this model instead of the ideal gas equation of state. Moreover, results of the flow through the nozzle and measurement data obtained from laboratory experiments of pressurised CO{sub 2} pipeline leakage were compared for the purpose of validation. The thermodynamic processes of the fluid both in the pipeline and the nozzle were described and analysed.

  12. Les Africaines Et Les Tic

    International Development Research Centre (IDRC) Digital Library (Canada)

    Enquête sur les technologies, la question de genre et autonomisation ...... Polachek, S. (1981) «Occupational self-selection: a human capital approach to sex ...... in the Computer Science major », Communications of the ACM, 44(5) : 108–14.

  13. Cryogenic equipment; Materiel cryogenique

    Energy Technology Data Exchange (ETDEWEB)

    Leger, L; Javellaud, J; Caro, C; Gilguy, R; Testard, O

    1966-06-01

    The cryostats presented here were built from standard parts; this makes it possible to construct a great variety of apparatus at minimum cost. The liquid nitrogen and helium reservoirs were designed so as to reduce losses to a minimum, and so as to make the cryostats as autonomous as possible. The experimental enclosure which is generally placed in the lower part of the apparatus requires a separate study in every case. Furthermore, complete assemblies such as transfer rods, isolated traps and high vacuum valves, were designed with a similar regard for the economic aspects and for the need for standardization. This equipment thus satisfies a great variety of experimental needs; it is readily adaptable and the consumptions of helium and liquid nitrogen are very low. (authors) [French] De nombreuses experiences utilisant les basses temperatures, necessitent l'emploi d'un materiel cryogenique complexe n'existant pas dans le commerce. Les cryostats presentes ici ont ete realises a partir d'elements standard, ce qui permet, malgre la diversite des appareils, de realiser un ensemble a moindre frais. Les reservoirs d'azote et d'helium liquides ont ete concus de facon a limiter les pertes et a conferer au cryostat la plus grande autonomie possible. L'enceinte experimentale situee en general dans la partie inferieure de l'appareil necessite dans tous les cas une etude speciale. D'autre part des ensembles complets tels que les cannes de transfert, piege isole, robinet pour vide secondaire, ont ete concus dans le meme souci de rentabilite et de standardisation. Ce materiel peut donc repondre a un grand nombre d'exigences experimentales, il est facilement adaptable, et les consommations d'helium et d'azote liquide sont tres reduites. (auteurs)

  14. Les barrages alpins

    Directory of Open Access Journals (Sweden)

    Alain Marnezy

    2009-03-01

    Full Text Available Les barrages-réservoirs de montagne ont été réalisés initialement dans les Alpes pour répondre à la demande d’énergie en période hivernale. Une certaine diversification des usages de l’eau s’est ensuite progressivement développée, en relation avec le développement touristique des collectivités locales. Aujourd’hui, la participation des ouvrages d’Électricité De France à la production de neige de culture représente une nouvelle étape. Dans les régions où les aménagements hydroélectriques sont nombreux, les besoins en eau pour la production de neige peuvent être résolus par prélèvements à partir des adductions EDF. Les gestionnaires de stations échappent ainsi aux inconvénients liés à la construction et à la gestion des « retenues collinaires ». Cette évolution, qui concerne déjà quelques régions alpines comme la haute Maurienne ou le Beaufortin, apparaît comme une forme renouvelée d’intégration territoriale de la ressource en eau.Mountain reservoirs were initially built in the Alps to meet energy needs in the winter. A certain diversification in the uses of water then gradually developed, related to tourism development in the local communities. Today, the use of facilities belonging to EDF (French Electricity Authority to provide water for winter resorts to make artificial snow represents a new phase. By taking water from EDF resources to supply snow-making equipment, resort managers are thus able to avoid the problems related to the construction and management of small headwater dams. This new orientation in the use of mountain water resources already affects a number of alpine regions such as the Upper Maurienne valley and Beaufortain massif and represents a renewed form of the territorial integration of water resources.

  15. Miniaturised pressurised liquid extraction aromatic hydrocarbons from soil and sediment with subsequent large-volume injection-gas chromatography

    NARCIS (Netherlands)

    Ramos, L.; Vreuls, J.J.; Brinkman, U.A.T.

    2000-01-01

    Analyte extraction is the main limitation when developing at-line, or on-line, procedures for the preparation of (semi)solid environmental samples. Pressurised liquid extraction (PLE) is an analyte- and matrix-independent technique which provides cleaner extracts than the time-consuming classical

  16. Les choses…

    Directory of Open Access Journals (Sweden)

    Pierre Curie

    2012-05-01

    Full Text Available Dans la culture tant des Monuments historiques que de l’Université française, le monumental a longtemps prévalu sur l’objet, peinture, sculpture ou objet d’art qui, lui, dans l’inconscient collectif, relevait tout naturellement du musée. Dans la pensée et dans les goûts d’André Chastel, les catégories n’étaient pas aussi manichéennes et à l’Inventaire, malgré une certaine prééminence de l’architecture, l’objet - au sens large - tint, dès le début de l’aventure, une place non négligeable. Le premier des Vocabulaires parus, en 1969, fut consacré à la tapisserie, suivi, en une vingtaine d’années, par la sculpture, les objets et le mobilier civil domestique, le vitrail…In the culture of France’s historic monuments, as in French universities, the monumental has long been considered as more important than sculptures or works of art, generally seen as more to do with museums. In the writings and tastes of André Chastel, however, the categories were not so clear-cut and, at the French Inventory, although architecture has enjoyed a certain pre-eminence, the object, in the broadest sense of the term, has been taken into consideration form the outset. Over 17,000 items now feature in the national database Palissy, on moveable objects. The first scientific vocabulary, published by the Inventory services in 1969, was devoted to tapestry and, over the last twenty years, other vocabularies have dealt with sculpture, domestic civil furniture and stained glass.

  17. Development of pressurised hot water extraction (PHWE) for essential compounds from Moringa oleifera leaf extracts.

    Science.gov (United States)

    Matshediso, Phatsimo G; Cukrowska, Ewa; Chimuka, Luke

    2015-04-01

    Pressurised hot water extraction (PHWE) is a "green" technology which can be used for the extraction of essential components in Moringa oleifera leaf extracts. The behaviour of three flavonols (myricetin, quercetin and kaempferol) and total phenolic content (TPC) in Moringa leaf powder were investigated at various temperatures using PHWE. The TPC of extracts from PHWE were investigated using two indicators. These are reducing activity and the radical scavenging activity of 2,2-diphenyl-1-picrylhydrazyl (DPPH). Flavonols content in the PHWE extracts were analysed on high performance liquid chromatography with ultra violet (HPLC-UV) detection. The concentration of kaempferol and myricetin started decreasing at 150 °C while that of quercetin remained steady with extraction temperature. Optimum extraction temperature for flavonols and DPPH radical scavenging activity was found to be 100 °C. The TPC increased with temperature until 150 °C and then decreased while the reducing activity increased. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Physics evaluation for testino. of RAPS and TAPS fuel pins in CIRUS pressurised water loop

    International Nuclear Information System (INIS)

    John, Benjamin; Paul, O.P.K.

    1976-01-01

    Relevant calculations carried out to assess the reactivity effect, heat generation and other parameters for testing of RAPS and TAPS fuel pins in the Cirus pressurised water loop are summarised. The Cirus neutron flux level being low, in order to simulate the RAPS design heat rating of ∫ Kdtheta = 40 w/cm, the required plutonium enrichment in mixed plutonium uranium oxide fuel pin was worked out. The results showed that a PuO 2 enrichment of 1.5 wt percent would be necessary to meet the above requirement. The analysis for the TAPS pin indicated that the desired heat flux of 115w/cm 2 cannot be obtained in the Cirus loop with either a 7 pin cluster geometry, or with a single pin with the enrichment level as used in TAPS pin. Lattice code DUMLAC and the core simulation code AECLHEX were used for these studies. (author)

  19. Probablistic risk assessment methodology application to Indian pressurised heavy water reactors

    International Nuclear Information System (INIS)

    Babar, A.K.; Grover, R.B.; Mehra, V.K.; Gangwal, D.K.; Chakraborty, G.

    1987-01-01

    Probabilistic risk assessment in the context of nuclear power plants is associated with models that predict the offsite radiological releases resulting from reactor accidents. Level 1 PRA deals with the identification of accident sequences relevant to the design of a system and also with their quantitative estimation. It is characterised by event tree, fault tree analysis. The initiating events applicable to pressurised heavy water reactors have been considered and the dominating initiating events essential for detailed studies are identified in this paper. Reliability analysis and the associated problems encountered during the case studies are mentioned briefly. It is imperative to validate the failure data used for analysis. Bayesian technique has been employed for the same and a brief account is included herein. A few important observations, e.g. effects of the presence of moderator, made during the application of probabilistic risk assessment methodology are also discussed. (author)

  20. Modelling the behaviour of corrosion products in the primary heat transfer circuits of pressurised water reactors

    International Nuclear Information System (INIS)

    Rodliffe, R.S.; Polley, M.V.; Thornton, E.W.

    1985-05-01

    The redistribution of corrosion products from the primary circuit surfaces of a water reactor can result in increased flow resistance, poorer heat transfer performance, fuel failure and radioactive contamination of circuit surfaces. The environment is generally sufficiently well controlled to ensure that the first three effects are not limiting. The last effect is of particular importance since radioactive corrosion products are major contributors to shutdown fields and since it is necessary to ensure that the radiation exposure of personnel is as low as reasonably achievable. This review focusses attention on the principles which must form the basis for any mechanistic model describing the formation, transport and deposition of radioactive corrosion products. It is relevant to all water reactors in which the primary heat transfer medium is predominantly single-phase water and in which steam is generated in a secondary circuit, i.e. including CANDU pressurised heavy water reactors, Sovient VVERs, etc. (author)

  1. Les incommensurables

    CERN Document Server

    Houdart, Sophie

    2015-01-01

    Le Large Hadron Collider, ou grand collisionneur de hadrons, est l'accélérateur de particules le plus grand et le plus puissant du monde. Prenant la forme d'un anneau de 26,659 kilomètres de circonférence, lové 100 mètres sous terre et officiellement domicilié à Meyrin, à la frontière de la France et de la Suisse, il est constitué d'aimants supraconducteurs et de structures accélératrices qui augmentent l'énergie des particules qui y circulent. Chaque jour, à l'intérieur de l'accélérateur, deux faisceaux de particules qui circulent en sens contraire à des énergies très élevées avant de rentrer en collision l'un avec l'autre. Les particules, lancées à 99,9999991 % de la vitesse de la lumière, effectuent 11245 fois le tour de l'accélérateur par seconde et entrent en collision quelque 600 millions de fois par seconde. Les Incommensurables est une minutieuse enquête de terrain sur cette "cathédrale" enfouie qui offre la possibilité de se connecter à l'immensité et aux mystères de...

  2. Gaseous emissions in pressurised fluidised-bed combustion. Analysis and summary of the pilot experiments; Kaasumaiset paeaestoet paineistetussa leijukerrospoltossa. Koetulosten kaesittely ja yhteenveto

    Energy Technology Data Exchange (ETDEWEB)

    Korpela, T.; Hippinen, I.; Konkola, M. [Helsinki Univ. of Technology, Espoo (Finland)

    1996-12-01

    The influence of operating conditions on gaseous emissions in pressurised fluidised-bed combustion have been studied. The research objectives have been behaviour of sulphur absorbents and reduction of sulphur dioxide emissions, reduction of nitrogen oxide emissions, release of vapour-phase alkalimetals and carbon monoxide emissions. The sulphur capture capacities of calcium-based sorbents under PFBC conditions have been studied at a pressurised fluidised-bed reactor and at a pressurised thermogravimetric apparatus. The project has also connected results of the experimental PFBC at HUT/EVO. (author)

  3. Les manifestations cardiovasculaires chez les hemodialyses ...

    African Journals Online (AJOL)

    Le but de l'étude est d'analyser sur une période de 12 mois chez 75 patients en hémodialyse chronique, âgés de 38ans en moyenne, le les aspects cliniques, thérapeutiques et évolutifs des manifestations cardiovasculaires. La prévalence est de 87,20% chez les patients. Les signes fonctionnels les plus fréquents sont la ...

  4. Fuel elements for pressurised-gas reactors; Elements combustibles des piles a gaz sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Stohr, J A; Englander, M; Gauthron, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The design and fabrication of fuel elements for the first CO{sub 2} pressurized reactors have induced to investigate: various cladding materials, natural uranium base fuels, canning processes. The main analogical tests used in connection with the fuel element study are described. These various tests have enabled, among others, the fabrication of the fuel element for the EL2 reactor. Lastly, future solutions for electrical power producing reactors are foreseen. (author)Fren. [French] L'etude et la realisation d'elements combustibles pour les premieres piles a CO{sub 2} sous pression ont conduit a examiner: les divers materiaux de gaine, les combustibles a base d'uranium naturel, les modes de gainage. Les principaux essais analogiques ayant servi au cours de l'etude de la cartouche sont decrits. Ces divers essais ont notamment permis la realisation de la cartouche de la pile EL2. Enfin sont envisagees les solutions futures pour les piles productrices d'energie electrique. (auteur)

  5. Proposta educativa com enfoque ergonômico para auxiliar na prevenção de lesões músculo-esqueléticas na equipe de enfermagem

    Directory of Open Access Journals (Sweden)

    Neusa Maria Costa Alexandre

    1998-12-01

    Full Text Available Os trabalhadores de enfermagem estão sujeitos a lesões na coluna vertebral, atribuídas a condições ergonômicas e posturais inadequadas. Com o objetivo de auxiliar na redução dessas lesões, elaborou-se uma proposta educativa específica para o pessoal de enfermagem, cujo planejamento e tópicos constam do presente estudo. A estratégia foi realizada a partir da análise do ambiente de trabalho e das atividades desenvolvidas por esse pessoal, abordando temas relativos à anatomia e biomecânica da coluna vertebral, orientações gerais de postura, aspectos ergonômicos específicos do trabalho da enfermagem e considerações sobre movimentação e transporte de pacientes.

  6. Flooding and non-equilibrium in counter-current flows with reference to pressurised water reactors

    International Nuclear Information System (INIS)

    Megahed, M.M.M.

    1981-12-01

    During the refill stage of a Loss of Coolant Accident (LOCA) in a Pressurised Water Reactor (PWR) the effectiveness with which the emergency coolant penetrates to the lower plenum, and hence to the core, is of paramount importance. Results of experimental and theoretical work carried out at the University of Strathclyde on two 1/10 scale planar test sections of a PWR downcomer annulus are presented. The experiments involved the countercurrent flows of air and water and the data were compared with existing flooding correlations for tubes. It was found experimentally that, as the inlet air flowed upwards against two opposing waterfalls, an increase in air flowrate caused the waterfalls to mover closer together until a critical air flowrate was reached where the waterfalls collapsed. A theoretical model defined this collapse condition. It was shown to be analogous to the choked flow of air through a nozzle whose cross sectional area varied with pressure. Previous experimental results for steam-water mixtures on similar test sections and the present air-water data were used to study condensation effects. Non-equilibrium effects were isolated and correlated against the dependent parameters of inlet water flowrate, inlet subcooling and downcomer wall temperature. A theoretical model giving good qualitative and quantitative agreement with experiment was developed. (author)

  7. Study of the contamination level in the primary circuit of a pressurised water reactor

    International Nuclear Information System (INIS)

    Gomit, J.-M.

    1980-07-01

    The purpose of this study is to work out a model which allows to predict the contamination level in the primary circuit of a pressurised water reactor (PWR). We assume that the passage of fission products from fuel (UO 2 ) to water takes place in two stages: a) the fission products created in the fuel diffuse and go out into the gap; b) owing to failure of clad, fission products stored in the gap diffuse into the water. A migration constant will correspond to each of these stages (ν(C) for fuel and ν(J) for gap). We have designed two models: - an empiric model in which constants ν(C) and ν(J) are adjusted from experiments CYRANO and BOUFFON carried out by the CEA; - a theoretical model to describe the physical mechanisms of migration inside the fuel. This leads us to introduce trapping and resolution probabilities. This models lead to a theoretical definition of ν(C). We have undertaken a second qualification of the empiric model using code PROFIP 3. Application to the Tihange reactor enabled us to get a good estimation of activity in the primary circuit and the number of failed rods during the first cycle [fr

  8. Shallow crack effect on brittle fracture of RPV during pressurised thermal shock

    International Nuclear Information System (INIS)

    Ikonen, K.

    1995-12-01

    This report describes the study on behaviour of postulated shallow surface cracks in embrittled reactor pressure vessel subjected to pressurised thermal shock loading in an emergency core cooling. The study is related to the pressure vessel of a VVER-440 type reactor. Instead of a conventional fracture parameter like stress intensity factor or J integral the maximum principal stress distribution on a crack tip area is used as a fracture criteria. The postulated cracks locate circumferentially at the inner surface of the reactor pressure wall and they penetrate the cladding layer and open to the inner surface. Axisymmetric and semielliptical crack shapes were studied. Load is formed of an internal pressure acting also on crack faces and of a thermal gradient in the pressure vessel wall. Physical properties of material and loading data correspond real conditions in VVER-440 RPV. The study was carried out by making lot of 2D- and 3D- finite element calculations. Analysing principles and computer programs are explained. Except of studying the shallow crack effect, one objective of the study has also been to develop further expertise and the in-house developed computing system to make effectively elastic-plastic fracture mechanical analyses for real structures under complicated loads. Though the study concerns VVER-440 RPV, the results are of more general interest especially related to thermal loads. (orig.) (11 refs.)

  9. Local multigrid mesh refinement in view of nuclear fuel 3D modelling in pressurised water reactors

    International Nuclear Information System (INIS)

    Barbie, L.

    2013-01-01

    The aim of this study is to improve the performances, in terms of memory space and computational time, of the current modelling of the Pellet-Cladding mechanical Interaction (PCI), complex phenomenon which may occurs during high power rises in pressurised water reactors. Among the mesh refinement methods - methods dedicated to efficiently treat local singularities - a local multi-grid approach was selected because it enables the use of a black-box solver while dealing few degrees of freedom at each level. The Local Defect Correction (LDC) method, well suited to a finite element discretization, was first analysed and checked in linear elasticity, on configurations resulting from the PCI, since its use in solid mechanics is little widespread. Various strategies concerning the implementation of the multilevel algorithm were also compared. Coupling the LDC method with the Zienkiewicz-Zhu a posteriori error estimator in order to automatically detect the zones to be refined, was then tested. Performances obtained on two-dimensional and three-dimensional cases are very satisfactory, since the algorithm proposed is more efficient than h-adaptive refinement methods. Lastly, the LDC algorithm was extended to nonlinear mechanics. Space/time refinement as well as transmission of the initial conditions during the re-meshing step were looked at. The first results obtained are encouraging and show the interest of using the LDC method for PCI modelling. (author) [fr

  10. Representative stresses for creep deformation and failure of pressurised tubes and pipes

    International Nuclear Information System (INIS)

    Cane, B.J.; Browne, R.J.

    1982-01-01

    Results of a series of tube and uniaxial tests on two casts of 1/2CrMoV pipe steel are examined to determine the representative stress which must be applied to uniaxial data in order to predict the strain rates and lives of pressurised tubes and pipes. The stress criterion for deformation is shown to correlate with the analytically derived reference stress (σsub(R)) at low pressure while at high pressures a modified reference stress (> σsub(R)) must be used. The rupture life exhibits a similar correlation such that the representative stress for rupture is given by σsub(R) at low stresses yet, at high stresses, it is greater than σsub(R) and attains a value comparable with the mean diameter hoop stress. The latter thus describes the rupture life at high pressures but significantly underestimates the life at low pressures approaching those in service. Consideration is given to the multiaxial stress rupture criterion and the effect of geometry in constant load tests. (author)

  11. Selective Extraction of Organic Contaminants from Soil Using Pressurised Liquid Extraction

    Directory of Open Access Journals (Sweden)

    Rozita Osman

    2013-01-01

    Full Text Available This study focuses on the application of sorbents in pressurised liquid extraction (PLE cell to establish a selective extraction of a variety of organic contaminants (polycyclic aromatic hydrocarbons (PAHs, chlorpyrifos, phenol, pentachlorophenol, and sterols from soil. The selectivity and efficiency of each sorbent depend on the properties of the material, extracting solvent, capacity factor, organic compounds of interest, and PLE operating parameters (temperature, pressure, and extraction time. Several sorbents (silica, alumina, and Florisil were evaluated and with the proper choice of solvents, polar and nonpolar compounds were successfully separated in two fractions. Nonpolar compounds (PAHs, chlorpyrifos, and pentachlorophenol were recovered in the first fraction using a polar sorbent such as Florisil or alumina, and n-hexane as eluting solvent, while more polar compounds (phenol and sterols were recovered in the second fraction using methanol. Silica (5 g was found to be effective for selective extraction with the satisfactory recoveries for all compounds (PAHs from 87.1–96.2%, chlorpyrifos 102.9%, sterols from 93.7–100.5%, phenol 91.9%, and pentachlorophenol 106.2%. The efficiency and precision of this extraction approach and the existing EPA Method 3545 were compared.

  12. Optimisation of pressurised liquid extraction of antioxidants from black bamboo leaves.

    Science.gov (United States)

    Shang, Ya Fang; Kim, Sang Min; Um, Byung-Hun

    2014-07-01

    To develop an efficient green extraction approach for recovering bioactive compounds from natural plants, the potential of using pressurised liquid extraction (PLE) was examined on black bamboo (Phyllostachys nigra) leaves, with ethanol/water as solvents. The superheated PLE process showed a higher recovery of most constituents and antioxidative activity, compared to reflux extraction, with a significantly improved recovery of the total phenolic (TP) and flavonoid (TF) content and DPPH radical scavenging ability. For a broad range of ethanol aqueous solutions and temperatures, 50% EtOH and 200°C (static time: 25min) gave the best performance, in terms of the TP and TF (75% EtOH) content yield and DPPH scavenging ability (25% EtOH). Under the optimised extraction conditions, eight main antioxidative compounds were isolated and identified with HPLC-ABTS(+) assay guidance and assessed for radical scavenging activity. The superheated extraction process for black bamboo leaves enhanced the antioxidant properties by increasing the extraction of the phenolic components. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. A Preliminary Study Of The Effect Of Some Pressurising Gasses On The Viscosity Of Dimethyl Ether

    DEFF Research Database (Denmark)

    Sivebæk, Ion Marius; Jakobsen, Jørgen

    2006-01-01

    -micro glass viscometers, size 25, submerged completely in a constant temperature bath. A kinematic viscosity of 0,188 cSt  0,001 cSt @ 25 C, was found, consistent with the previous and initial result 0,186 cSt   0,002 cSt. Key words: Dimethyl Ether (DME), a clean substitute for diesel oil. DME viscosity......, of glass, has been used. No significant change of the efflux time was found for all the pressurising gasses, except for the gas CO2. A reduction of efflux times was found for the CO2 of about 9 %   0,6 %. The measurement accuracy for all these series was found for this very low viscosity fluid...... to be in the range 0,2 % up to more than 1 %. The previously reported viscosity of DME has been corrected for the surface tension effect. Viscosity determination was initially based on a direct comparison of efflux times of DME with efflux times of distilled water. Assuming an upper limit for the variation...

  14. Les jeux de hasard chez les enfants et les adolescents

    Science.gov (United States)

    Gupta, Rina; Pinzon, Jorge L

    2012-01-01

    RÉSUMÉ Même si, au Canada, les mineurs n’ont pas le droit de jouer à des jeux de hasard légalisés, les adolescents participent souvent à des jeux de hasard soit légalisés (produits de loterie, casino, terminaux de jeux vidéo), soit autonomes (jeux de cartes, paris sportifs, dés) à la maison et en milieu scolaire. Chez les adultes, le taux de prévalence de dépendance aux jeux de hasard au cours de la vie se situe entre 1 % et 2 %. D’après les données existantes, la prévalence chez les adolescents serait de deux à quatre fois plus élevée. On ne sait pas grand-chose des facteurs de risque d’apparition et de perpétuation d’une dépendance pathologique aux jeux de hasard. Le présent document de principes vise à informer les pédiatres, les médecins de famille et les autres professionnels de la santé des connaissances émergentes sur les jeux de hasard pendant l’enfance et l’adolescence et du risque de conséquences graves qui s’y rattachent. On y exhorte également les gouvernements fédéral, provinciaux et territoriaux à inclure cette question dans leur programme et à tenir compte des facteurs sociopolitiques associés aux jeux de hasard.

  15. Equipment considerations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Trace or ultratrace analyses require that the HPLC equipment used, including the detector, be optimal for such determinations. HPLC detectors are discussed at length in Chapter 4; discussion here is limited to the rest of the equipment. In general, commercial equipment is adequate for trace analysis; however, as the authors approach ultratrace analysis, it becomes very important to examine the equipment thoroughly and optimize it, where possible. For this reason they will review the equipment commonly used in HPLC and discuss the optimization steps. Detectability in HPLC is influenced by two factors (1): (a) baseline noise or other interferences that lead to errors in assigning the baseline absorbance; (b) peak width. 87 refs

  16. Volcanic instability: the effects of internal pressurisation and consideration of rock mass properties

    Science.gov (United States)

    Thomas, M.; Petford, N.; Bromhead, E. N.

    2003-04-01

    Since the events at mount St Helens during May 1980, there has been considerable attention focused on the mechanisms and consequences of volcanic edifice collapse. As a result catastrophic edifice failure is now recognised as perhaps the most socially devastating natural disaster associated with volcanic activity. The tendency of volcanic edifices to fail appears ubiquitous behaviour, and a number of failure precursors and more importantly triggers have been suggested, of which magmagenic (e.g. thermal and mechanical pore pressure increases) and seismogenic (e.g. tectonic or volcanic earthquakes) are common. Despite the increased interest in this field, large-scale, deep seated catastrophic edifice failure has still only be successfully modelled in the most extreme of cases, which does not account for the volume of field evidence of edifice collapse. One possible reason for this is the way that pore pressures are considered. For pore fluids that are entering the system from the surface (e.g. rain water) there is a set volume and therefore a set pressure that the system can accommodate, as once the edifice becomes saturated, any new fluids to fall on the surface of the edifice simply run off. If we consider internal pore fluid pressurisation from magmatic gasses, then the pressurising fluid is already in the system and the only limit to how much pressure can be accommodated is the strength of the edifice itself. The failure to fully consider the strength and deformability of a rock mass compared to an intact laboratory sample of a volcanic rock may result in a misleading assessment of edifice strength. An intact laboratory sample of basalt may yield a strength of 100--350 MPa (from uniaxial compression tests), a volcanic edifice however is not an intact rock, and is cut through by many discontinuities, including; faults, fractures and layering from discrete lava flows. A better approximation of the true strength can be determined from the rock mass rating (RMR

  17. Pressurised electro-osmotic dewatering of activated and anaerobically digested sludges: electrical variables analysis.

    Science.gov (United States)

    Citeau, M; Olivier, J; Mahmoud, A; Vaxelaire, J; Larue, O; Vorobiev, E

    2012-09-15

    Pressurised electro-osmotic dewatering (PEOD) of two sewage sludges (activated and anaerobically digested) was studied under constant electric current (C.C.) and constant voltage (C.V.) with a laboratory chamber simulating closely an industrial filter. The influence of sludge characteristics, process parameters, and electrode/filter cloth position was investigated. The next parameters were tested: 40 and 80 A/m², 20, 30, and 50 V-for digested sludge dewatering; and 20, 40 and 80 A/m², 20, 30, and 50 V-for activated sludge dewatering. Effects of filter cloth electric resistance and initial cake thickness were also investigated. The application of PEOD provides a gain of 12 points of dry solids content for the digested sludge (47.0% w/w) and for the activated sludge (31.7% w/w). In PEOD processed at C.C. or at C.V., the dewatering flow rate was similar for the same electric field intensity. In C.C. mode, both the electric resistance of cake and voltage increase, causing a temperature rise by ohmic effect. In C.V. mode, a current intensity peak was observed in the earlier dewatering period. Applying at first a constant current and later on a constant voltage, permitted to have better control of ohmic heating effect. The dewatering rate was not significantly affected by the presence of filter cloth on electrodes, but the use of a thin filter cloth reduced remarkably the energy consumption compared to a thicker one: 69% of reduction energy input at 45% w/w of dry solids content. The reduction of the initial cake thickness is advantageous to increase the final dry solids content. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. Modelling and numerical simulation of the corrosion product transport in the pressurised water reactor primary circuit

    International Nuclear Information System (INIS)

    Marchetto, C.

    2002-05-01

    During operation of pressurised water reactor, corrosion of the primary circuit alloys leads to the release of metallic species such as iron, nickel and cobalt in the primary fluid. These corrosion products are implicated in different transport phenomena and are activated in the reactor core where they are submitted to neutron flux. The radioactive corrosion products are afterwards present in the out of flux parts of primary circuit where they generate a radiation field. The first part of this study deals with the modelling of the corrosion: product transport phenomena. In particular, considering the current state of the art, corrosion and release mechanisms are described empirically, which allows to take into account the material surface properties. New mass balance equations describing the corrosion product behaviour are thus obtained. The numerical resolution of these equations is implemented in the second part of this work. In order to obtain large time steps, we choose an implicit time scheme. The associated system is linearized from the Newton method and is solved by a preconditioned GMRES method. Moreover, a time step auto-adaptive management based on Newton iterations is performed. Consequently, an efficient resolution has been implemented, allowing to describe not only the quasi-steady evolutions but also the fast transients. In a last step, numerical simulations are carried out in order to validate the new corrosion product transport modelling and to illustrate the capabilities of this modelling. Notably, the numerical results obtained indicate that the code allows to restore the on-site observations underlining the influence of material surface properties on reactor contamination. (author)

  19. Jeux chez les Touaregs

    OpenAIRE

    Bernus, E.

    2012-01-01

    Parmi les jeux pratiqués par les Touaregs, il faut distinguer les jeux sportifs qui opposent deux équipes ou deux hommes, des jeux de société dans un cadre inscrit dans le sable, et les jeux d’esprit, véritables joutes verbales ; enfin, il faut signaler la construction par les enfants de jouets. Un certain nombre de jeux sont connus chez d’autres populations africaines. L’ouvrage de Charles Béart, Jeux et jouets de l’Ouest africain (1955), nous permet d’utiles comparaisons. Il est donc intére...

  20. Les risques du travail

    CERN Document Server

    Thébaud-Mony, Annie

    2015-01-01

    Depuis les années 1990, les conditions de travail se sont peu à peu imposées dans le débat social. Néanmoins, la situation reste critique. Les risques traditionnels n'ont pas disparu : les manutentions lourdes, l'exposition professionnelle aux cancérogènes, au bruit ou aux vibrations demeurent répandues... De plus, certaines " améliorations " n'ont fait que déplacer et dissimuler les problèmes, telle l'externalisation des risques grâce à la sous-traitance. Dans le même temps, les transformations du travail et des modalités de gestion de la main-d'œuvre ont fragilisé les collectifs et accru l'isolement des salariés, conduisant à une montée visible de la souffrance psychique. Face à ces évolutions, il est plus que jamais nécessaire que tous les acteurs concernés, en particulier les salariés eux-mêmes et leurs représentants, s'approprient les connaissances indispensables pour améliorer la protection de la santé sur les lieux du travail. Tel est le but de ce livre, qui renouvelle int�...

  1. AP1000R pressurised water reactor project in china advances toward completion

    International Nuclear Information System (INIS)

    Harrop, G.

    2014-01-01

    The AP1000 R pressurised water reactor (PWR) project in China is the first deployment of its first-of-a-kind Generation III+ technology, making it one of most internationally important and industry-significant new build projects. The innovative AP1000 PWR design contains advanced passive safety and performance features that involve fewer active safety components than a traditional plant, thereby reducing the site footprint. The AP1000 reactor is the first and only Generation III+ nuclear power plant to be granted design certification by the United States Nuclear Regulatory Commission, and it has received an Interim Design Acceptance Confirmation from the Office for Nuclear Regulation and an Interim Statement of Design Acceptability from the Environment Agency in the United Kingdom. Construction and testing of dual AP1000 PWR units is currently in progress in each of two coastal sites in the People's Republic of China: Sanmen (Zhejiang Province) and Haiyang (Shandong Province). Since the initial contract award in 2007, the Westinghouse Consortium has worked in concert with the owners to construct the plants using innovative structural and mechanical modules. Uniquely designed plant components and essential instrumentation and control systems have been manufactured, delivered, and installed at the plants. Numerous personnel, including future reactor operators, have been trained at both the Sanmen and Haiyang sites, and technology transfer of technical documents and computer codes is well underway. The commercial operation dates are now nearing for Sanmen Unit 1 and Haiyang Unit 1, the first two units scheduled for completion. Consequently, these units are now in advanced stages of completion and present activities include planning and preparation for pre-operational testing, system turnover, and commissioning leading to fuel load, and eventual commercial operation. These activities are pioneering, in that they have never before been performed for a new build of

  2. Adapted ECC ozonesonde for long-duration flights aboard boundary-layer pressurised balloons

    Science.gov (United States)

    Gheusi, François; Durand, Pierre; Verdier, Nicolas; Dulac, François; Attié, Jean-Luc; Commun, Philippe; Barret, Brice; Basdevant, Claude; Clenet, Antoine; Derrien, Solène; Doerenbecher, Alexis; El Amraoui, Laaziz; Fontaine, Alain; Hache, Emeric; Jambert, Corinne; Jaumouillé, Elodie; Meyerfeld, Yves; Roblou, Laurent; Tocquer, Flore

    2016-12-01

    Since the 1970s, the French space agency CNES has developed boundary-layer pressurised balloons (BLPBs) with the capability to transport lightweight scientific payloads at isopycnic level and offer a quasi-Lagrangian sampling of the lower atmosphere over very long distances and durations (up to several weeks).Electrochemical concentration cell (ECC) ozonesondes are widely used under small sounding balloons. However, their autonomy is limited to a few hours owing to power consumption and electrolyte evaporation. An adaptation of the ECC sonde has been developed specifically for long-duration BLPB flights. Compared to conventional ECC sondes, the main feature is the possibility of programming periodic measurement sequences (with possible remote control during the flight). To increase the ozonesonde autonomy, the strategy has been adopted of short measurement sequences (2-3 min) regularly spaced in time (e.g. every 15 min). The rest of the time, the sonde pump is turned off. Results of preliminary ground-based tests are first presented. In particular, the sonde was able to provide correct ozone concentrations against a reference UV-absorption ozone analyser every 15 min for 4 days. Then we illustrate results from 16 BLBP flights launched over the western Mediterranean during three summer field campaigns of the ChArMEx project (http://charmex.lsce.ipsl.fr): TRAQA in 2012, and ADRIMED and SAFMED in 2013. BLPB drifting altitudes were in the range 0.25-3.2 km. The longest flight lasted more than 32 h and covered more than 1000 km. Satisfactory data were obtained when compared to independent ozone measurements close in space and time. The quasi-Lagrangian measurements allowed a first look at ozone diurnal evolution in the marine boundary layer as well as in the lower free troposphere. During some flight segments, there was indication of photochemical ozone production in the marine boundary layer or even in the free troposphere, at rates ranging from 1 to 2 ppbv h -1, which

  3. Excision Les jeunes changent l'Afrique par les TIC

    International Development Research Centre (IDRC) Digital Library (Canada)

    Comité Inter-Africain sur les Pratiques Traditionnelles ayant effet sur la santé des ... Planche 7 - Perception genrée de la citoyenneté : les dire des femmes. 90 ...... dans le monde avec les migrations internationales, l'excision ne semble pas être ...... En utilisant les TIC pour exprimer leurs attentes et leurs besoins, les jeunes, ...

  4. Development and testing of on-line analytical instrumentation for alkali and heavy metal release in pressurised conversion processes

    Energy Technology Data Exchange (ETDEWEB)

    Hernberg, R; Haeyrinen, V; Oikari, R [Tampere Univ. of Technology (Finland)

    1997-10-01

    The purpose of the project is to demonstrate in industrial conditions and further develop the continuous alkali measurement method plasma excited alkali resonance line spectroscopy (PEARLS) developed at Tampere University of Technology (TUT). The demonstration takes place in joint measuring campaigns, where two other continuous alkali measurement methods, ELIF and surface ionisation, are being simultaneously demonstrated. A modification of PEARLS will also be developed for the continuous measurement of heavy metal concentrations. A market study of continuous measuring techniques for alkali and heavy metals is further part of the project. The method will be demonstrated in two pressurised fluidised bed combustion facilities. One of these is the 10 MW PCFB of Foster Wheeler Energia Oy in Karhula. The second one is yet to be decided. The first measuring campaign is scheduled for the spring of 1997 in Karhula. In 1996 the group at TUT participated in the performance of a market study regarding continuous measuring techniques for alkali and heavy metal concentrations. A draft report was submitted to and approved by the EC. Development work on PEARLS in 1996 has centered around the construction of a calibration device for alkali measurements. The device can be used by all three measuring techniques in the project to check readings against a known alkali concentration at controlled and known conditions. In 1996 PEARLS was applied for alkali measurement at several pressurised combustion installations of laboratory and industrial pilot scale

  5. Les outils du CERN

    CERN Multimedia

    1999-01-01

    C'est le plus grand centre mondial de recherche en physique des particules. Les outils du Laboratoire, accélérateurs et détecteurs de particules, figurent parmi les instruments scientifiques les plus complexes au monde. Des prix Nobels ont d'ailleurs été attribués aux physiciens du CERN pour leurs développements.

  6. Les Malalties dels cereals

    OpenAIRE

    Puiggrós i Jové, Josep Maria

    1989-01-01

    En aquest treball es fa una descripció de les principals malalties dels cereals que han estat trobades a Catalunya. Agrupant-les segons ataquin la fulla i espiga: oïdi, rovells, septòries, Rhynchosporium, Helminthosporium, i virus; al coll i tija: Cercosporella, Ophiobolus, Rhizoctbnia i Fusarium o bé les que vénen de la llavor: carbons, càries i Helminthospbrium. A part de la descripció, hom fa esment de les observacions efectuades els darrers anys en els diferents indrets de...

  7. Communication Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Material, Software and Related Technology; Communication recue de certains Etats Membres concernant les directives applicables aux transferts d'equipements, de matieres et de logiciels a double usage dans le domaine nucleaire, ainsi que de technologies connexes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-09

    The Agency has received a Note Verbale from the Permanent Mission of Hungary, dated 14 June 2010, in which it requests that the Agency circulate to all Member States a letter of 7 May 2010 from the Chairman of the Nuclear Suppliers Group, Ambassador Ms. Gyorgyi Martin Zanathy, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxemburg, Malta, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America,1 providing further information on those Governments' Guidelines for Nuclear Transfers [French] L'Agence a recu une note verbale de la mission permanente de la Hongrie, en date du 14 juin 010, lui demandant de communiquer a tous les Etats Membres une lettre du 7 mai 2010 du president du Groupe des fournisseurs nucleaires, l'ambassadeur Gyorgyi Martin Zanathy, adressee au Directeur general au nom des gouvernements des Etats suivants : Afrique du Sud, Allemagne, Argentine, Australie, Autriche, Belarus, Belgique, Bresil, Bulgarie, Canada, Chine, Croatie, Chypre, Danemark, Espagne, Estonie, Etats-Unis d'Amerique, Federation de Russie, Finlande, France, Grece, Hongrie, Irlande, Islande, Italie, Japon, Kazakhstan, Lettonie, Lituanie, Luxembourg, Malte, Norvege, Nouvelle-Zelande, Pays-Bas, Pologne, Portugal, Republique de Coree, Republique tcheque, Roumanie, Royaume-Uni de Grande-Bretagne et d'Irlande du Nord, Slovaquie, Slovenie, Suede, Suisse, Turquie et Ukraine1. Cette lettre apporte des informations supplementaires sur les Directives de ces gouvernements applicables aux transferts nucleaires.

  8. Communication Received from the Permanent Mission of Brazil regarding Certain Member States' Guidelines for the Export of Nuclear Material, Equipment and Technology; Communication recue de la mission permanente du Bresil concernant les Directives de certains Etats Membres applicables a l'exportation de matieres, d'equipements et de technologie nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-12-03

    The Agency has received a Note Verbale from the Permanent Mission of Brazil, dated 22 March 2007, in which it requests that the Agency circulate to all Member States a letter of 12 December 2006 from the Chairman of the Nuclear Suppliers Group, Ambassador Jose Artur Denot Medeiros, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxemburg, Malta, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, providing further information on those Governments' Guidelines for Nuclear Transfers [French] L'Agence a recu une note verbale de la mission permanente du Bresil, en date du 22 mars 2007, lui demandant de diffuser a tous les Etats Membres une lettre du 12 decembre 2006 du president du Groupe des fournisseurs nucleaires, l'ambassadeur Artur Denot Medeiros, adressee au Directeur general au nom des gouvernements des Etats suivants : Afrique du Sud, Allemagne, Argentine, Australie, Autriche, Belarus, Belgique, Bresil, Bulgarie, Canada, Chine, Chypre, Croatie, Danemark, Espagne, Estonie, Etats-Unis d'Amerique, Federation de Russie, Finlande, France, Grece, Hongrie, Irlande, Italie, Japon, Kazakhstan, Lettonie, Lituanie, Luxembourg, Malte, Norvege, Nouvelle-Zelande, Pays-Bas, Pologne, Portugal, Republique de Coree, Republique tcheque, Roumanie, Royaume-Uni de Grande-Bretagne et d'Irlande du Nord, Slovaquie, Slovenie, Suede, Suisse, Turquie et Ukraine. Cette lettre apporte des informations supplementaires sur les Directives de ces gouvernements applicables aux transferts nucleaires.

  9. Communication Received from the Permanent Mission of the Netherlands regarding Certain Member States' Guidelines for the Export of Nuclear Material, Equipment and Technology; Communication recue de la mission permanente des Pays-Bas concernant les Directives de certains Etats Membres applicables a l'exportation de matieres, d'equipements et de technologie nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-09-05

    The Agency has received a Note Verbale from the Permanent Mission of the Kingdom of the Netherlands, dated 12 July 2011, in which it requests that the Agency circulate to all Member States a letter of 12 July 2011 from the Chairman of the Nuclear Suppliers Group, Ambassador Piet de Klerk, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, providing further information on those Governments' Guidelines for Nuclear Transfers [French] L'Agence a recu une note verbale de la mission permanente du Royaume des Pays-Bas, en date du 12 juillet 2011, lui demandant de communiquer a tous les Etats Membres une lettre du 12 juillet 2011 du president du Groupe des fournisseurs nucleaires, l'ambassadeur Piet de Klerk, adressee au Directeur general au nom des gouvernements des Etats suivants : Afrique du Sud, Allemagne, Argentine, Australie, Autriche, Belarus, Belgique, Bresil, Bulgarie, Canada, Chine, Croatie, Chypre, Danemark, Espagne, Estonie, Etats-Unis d'Amerique, Federation de Russie, Finlande, France, Grece, Hongrie, Irlande, Islande, Italie, Japon, Kazakhstan, Lettonie, Lituanie, Luxembourg, Malte, Norvege, Nouvelle-Zelande, Pays-Bas, Pologne, Portugal, Republique de Coree, Republique tcheque, Roumanie, Royaume-Uni de Grande-Bretagne et d'Irlande du Nord, Slovaquie, Slovenie, Suede, Suisse, Turquie et Ukraineb. Cette lettre apporte des informations supplementaires sur les Directives de ces gouvernements applicables aux transferts nucleaires.

  10. Les trous noirs

    CERN Document Server

    Ioli, Elena

    2016-01-01

    L'univers est peuplé par des étoiles, des planètes, des galaxies, des astéroïdes, des comètes, mais les trous noirs en sont certainement les habitants les plus mystérieux et les plus fascinants ! Grâce à cette merveilleuse histoire racontée par papy Gino, professeur d'astronomie, les trous noirs n auront plus de secrets pour vous ! C est l'été, le soleil illumine le ciel, la plage est en feu : une journée à la plage pleine de jeux et de plongée qui va se transformer pour Bernardo, Gregorio et leurs deux amis en une aventure inattendue. Ils découvriront les secrets des trous noirs, d étranges objets célestes que personne n'a jamais vus mais qui existent bel et bien ! Grand-père Gino, un professeur d astronomie à la retraite, emmènera les enfants à l'intérieur d'un trou noir, leur expliquera pourquoi ils sont noirs, comment ils sont nés et comment les scientifiques pensent qu'ils vont mourir. Et Gino leur racontera même ce qui se trouve de l'autre côté d'un trou noir...

  11. Les Cahiers du CREAD

    African Journals Online (AJOL)

    Admin

    phénomène et son évolution sur la période 1990-2009. A cet effet, ... que les dépenses publiques, le taux d'inflation, le taux de chômage et le SNMG sont les ..... economy into the dynamics of Post-Socialist economies: A framework of analysis ...

  12. Les Cahiers du CREAD

    African Journals Online (AJOL)

    Admin

    politiques, au cœur de cette stratégie développementiste qui a enfanté. 3 La formation ... humaines dans l'une des entreprises nationales algériennes pendant les ...... les années comme critères de recrutement pour deux différents niveaux ...

  13. Les Cahiers du CREAD

    African Journals Online (AJOL)

    Admin

    élimination. ... Les propriétés physiques et thermiques des différents types de déchets solides, tels ... des politiques en matière de gestion des déchets en Europe depuis les ..... soit un volume de stockage des déchets de plus de 1 520 440 m3.

  14. Les souvenirs du fondateur

    Directory of Open Access Journals (Sweden)

    Marie-Thérèse Curie

    2009-11-01

    Full Text Available J’étais vicaire à Notre-Dame de Dole dans les années cinquante. Cette fonction, à cette époque, me mettait en contact permanent avec les mouvements de jeunesse, ceux de l’âge d’or des « patros » et des colonies de vacances. On me demanda d’ailleurs de créer plusieurs de ces « colos » de filles (La Rixouse, les Rivières, les Perrets dans le Jura, mais aussi à l’île d’Yeu pour le diocèse. Mon bon contact avec les jeunes et la confiance de ma hiérarchie me désignèrent pour m’occuper d’une paroi...

  15. Stress intensity factors for underclad and through clad defects in a reactor pressure vessel submitted to a pressurised thermal shock

    International Nuclear Information System (INIS)

    Marie, S.; Menager, Y.; Chapuliot, S.

    2005-01-01

    CEA has launched important work on the development of a Stress Intensity Factors compendium for cracks in a Reactor Pressure Vessel (RPV) taking into account the cladding. The work is performed by Finite Element analysis with a parametric mesh for two types of defects (under clad defect and through clad defect) and a wide range of geometrical and material parameters. In addition, an analytical stress solution for Pressurised Thermal Shock (PTS) on the RPV is proposed to allow a complete analytical estimation of the stress intensity factor K I for the PTS problem. The results are validated by comparison with a complete 3D finite element calculation performed on a complex and realistic case study

  16. The decontamination of a pressurised suit area at AEE Winfrith. Part 1

    International Nuclear Information System (INIS)

    Bond, R.D.; Rankin, J.D.; Robinson, D.H.; Sanders, M.J.

    1984-04-01

    Dry suction cleaning and chemical foam treatment were used on a plutonium oxide decontaminated area. Details of the equipment and reagents are given together with the results. Average levels of contamination by one application were reduced by over 80 percent, and airborne levels by more than 99 percent. (U.K.)

  17. Les poissons de Guyane

    OpenAIRE

    Ifremer

    1992-01-01

    Vous trouverez dans ce document les 24 poissons les plus courants de Guyane (sur un nombre d'espèces approchant les 200) avec leurs principales caractéristiques, leurs noms scientifiques, français, anglais et espagnol et leurs photographies. Ils sont classés, de l'acoupa au vivaneau ti yeux, par ordre alphabétique. Si vous ne trouvez pas de chiffres sur la production de telle ou telle espèce, c'est parce qu'ils n'existent pas, mais aussi et surtout parce qu'ils ne signifieraient rien, l...

  18. Assessment of the causes of failures of roto-dynamic equipment in Cirus

    International Nuclear Information System (INIS)

    Rao, K.N.; Singh, S.; Ganeshan, P.

    1994-01-01

    As a part of Cirus reactor life extension program study, a service life evaluation of critical roto-dynamic equipment in Cirus such as primary coolant pumps, and their concrete foundation structures, pressurised water loop pumps, main air compressors and supply and exhaust fans, was performed. An assessment of the causes of failures of roto-dynamic equipment in Cirus was done. Based on assessment of the degradation mitigating features and comparison to similar roto-dynamic equipment and their concrete foundation structures, it was concluded that life extension of these roto-dynamic equipment and their structures is feasible. To support this conclusion a program involving: a) non-destructive testing, b) surveillance and monitoring and, c) preventive maintenance is recommended. (author). 4 refs

  19. Mesurer et comparer les contextes et les politiques alimentaires en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    En Amérique latine, les maladies non transmissibles (MNT) sont responsables de trois décès sur quatre. Une mauvaise alimentation fait augmenter de plus en plus les décès et les maladies évitables et prématurées liés aux MNT. Dans le but de régler ce problème, ce projet suivra et comparera les contextes et les ...

  20. Q-factor of coolant flow in the primary circuit of NPP with pressurised water reactors

    International Nuclear Information System (INIS)

    Proskuryakov, K.N.; Belikov, S.O.; Novikov, K.S.

    2011-01-01

    Systems of preoperational vibration dynamic monitoring in of WWER are presented. The results of measurements during commission of NPP with WWER are presented. The paper provides the result of the research, that estimation of coolant fluctuations caused by pulse perturbation of pressure in the primary circuit NPP. It is shown that results could be received at known value of a Q - factor of acoustical oscillatory system only. The research demonstrates the results of dependence of the sound speed from the mass steam content in the coolant flow thru reactor core. The worked out results can be used for identification of the reasons of abnormal growth of level of vibrations of fuel assembly, fuel rod, equipment and internals, and for forecasting the operation conditions which provide of vibration - acoustical resonances in the primary loop equipment. (author)

  1. Communications Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Materials, Software and Related Technology; Communications recues de certains Etats Membres concernant les directives applicables aux transferts d'equipements, de matieres et de logiciels a double usage dans le domaine nucleaire, ainsi que de technologies connexes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-04-10

    The Director General of the International Atomic Energy Agency has received Notes Verbales, dated 1 December 2005, from the Resident Representatives to the Agency of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Poland, Portugal, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, relating to transfers of nuclear-related dual-use equipment, materials, software and related technology [French] Le Directeur general de l'Agence internationale de l'energie atomique a recu des notes verbales datees du 1er decembre 2006 des representants permanents aupres de l'Agence des Etats suivants : Afrique du Sud, Allemagne, Argentine, Australie, Autriche, Belarus, Belgique, Bresil, Bulgarie, Canada, Croatie, Espagne, Estonie, Etats-Unis d'Amerique, Finlande, France, Grece, Hongrie, Irlande, Italie, Japon, Lettonie, Lituanie, Luxembourg, Malte, Nouvelle-Zelande, Pays-Bas, Pologne, Portugal, Republique de Coree, Republique tcheque, Royaume-Uni de Grande-Bretagne et d'Irlande du Nord, Slovenie, Suede, Suisse, Turquie et Ukraine, au sujet des transferts d'equipements, de matieres et de logiciels e double usage dans le domaine nucleaire, ainsi que de technologies connexes.

  2. Les chemins du savoir

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cathy Egan

    solutions africaines aux problèmes causés par les politiques d'ajustement structurel sévères imposées par les institutions financières internationales. Aujourd'hui, cet organisme à but non lucratif, se place au premier rang des organismes de recherche en économie en. « Quand la démocratie bat de l'aile dans un pays, tout.

  3. LES PAYS EN TRANSITION

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cathy Egan

    En 2002, une certaine paix sociale avait été rétablie, bien qu'elle fut instable et souvent entachée de violence. Le pays amorçait le ... mieux comprendre comment il recueille et diffuse l'information destinée ... transition) et les technologies de l'information et de la communication (TIC). Les étapes suivantes ont consisté à ...

  4. Lesles sexospécifiques et la violence dans les villes | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    20 oct. 2017 ... Une croissance rapide et des identités sexuelles ancrées favorisent la violence ... services des villes mettent les femmes et les minorités sexuelles en danger. .... Une étude de cas sur les femmes et les transports à Guwahati ...

  5. Abolir les obstacles que constituent les frais de santé : les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    10 juin 2016 ... Abolir les obstacles que constituent les frais de santé : les ... Le financement des services de santé repose sur un système de ... Dans les années 1980, conformément aux recommandations d'organismes internationaux, ...

  6. [Hydrotherapy equipment].

    Science.gov (United States)

    Tsibikov, V B; Ragozin, S I; Mikheeva, L V

    1985-01-01

    A flow-chart is developed demonstrating the relation between medical and prophylactic institutions within the organizational structure of the rehabilitation system and main types of rehabilitation procedures. In order to ascertain the priority in equipping rehabilitation services with adequate hardware the special priority criterion is introduced. The highest priority is assigned to balneotherapeutic and fangotherapeutic services. Based on the operation-by-operation analysis of clinical processes related to service and performance of balneologic procedures the preliminary set of clinical devices designed for baths, basins and showers in hospitals and rehabilitation departments is defined in a generalized form.

  7. Cyclic pressurisation of Mount St Helens dacites and basalt. Laboratory results and implications for lava dome monitoring

    Science.gov (United States)

    Kendrick, Jackie; Dainty, Matthew; Smith, Rosanna; Sammonds, Peter; Pallister, John; Meredith, Phillip

    2010-05-01

    Lava domes are frequently subjected to cyclic heating and pressurisation, which may weaken the dome rocks, leading to renewed extrusion, explosions or collapse. These heating and loading cycles can be recreated in the laboratory, allowing the level of crack damage caused by these cycles to be established through analysing elastic moduli. Acoustic emissions (AEs) indicate the timing of cracking, and can also be used to interpret precursory seismicity for eruption prediction. Experiment samples are from Mount St. Helens, USA: 3 dacites from the Pine Creek eruptive period (2.9-2.55 ka), a Castle Creek age basalt (2.55-1.895 ka), and 4 dacites from the 2004-2008 eruption. Each sample was cut into several cylindrical cores (25 mm diameter and 62.5-70 mm long). Some samples were then heated and cooled at 1˚C/ minute to a target temperature of 600o C or 900o C, and held for 2 hours to achieve thermal equilibrium. This heating can cause cracking due to contrasts in thermal expansion of different minerals. Dynamic elastic moduli were calculated for each sample using ultrasonic wave velocity, density and porosity for later comparison to static elastic moduli gathered during deformation. One core of each sample was loaded to failure in uniaxial compression in order to find the short term strength of the sample. For all cyclic loading tests, conducted on pre-heated and unheated cores, samples were loaded at 10-5 s-1 strain rate then unloaded to 5MPa. Subsequent cycles had an increasing peak load. Most had the same rate for unloading, with a few samples unloaded instantaneously. Axial, radial and volumetric strain were determined from the recorded displacement throughout the experiment and used with the axial stress measurements to calculate static elastic moduli. Samples loaded to failure with no cycling generally failed at higher stresses than their cyclically loaded counter-parts, whilst rapid unloading increased their strength. Failure stresses of the dacite lava dome

  8. Cryogenic equipment

    International Nuclear Information System (INIS)

    Leger, L.; Javellaud, J.; Caro, C.; Gilguy, R.; Testard, O.

    1966-06-01

    The cryostats presented here were built from standard parts; this makes it possible to construct a great variety of apparatus at minimum cost. The liquid nitrogen and helium reservoirs were designed so as to reduce losses to a minimum, and so as to make the cryostats as autonomous as possible. The experimental enclosure which is generally placed in the lower part of the apparatus requires a separate study in every case. Furthermore, complete assemblies such as transfer rods, isolated traps and high vacuum valves, were designed with a similar regard for the economic aspects and for the need for standardization. This equipment thus satisfies a great variety of experimental needs; it is readily adaptable and the consumptions of helium and liquid nitrogen are very low. (authors) [fr

  9. Design and development of rolled joint for moderator sparger channel of an Indian Pressurised Heavy Water Reactor

    International Nuclear Information System (INIS)

    Joemon, V.; Sinha, R.K.

    1993-01-01

    Indian Pressurised Heavy Water Reactors are natural uranium fuelled heavy water moderated and cooled reactors. As per the conventional scheme, the moderator enters through one or more inlet nozzles penetrating the calandria shell and flows out through outlet nozzles. Baffles are fixed at the inlet nozzles for proper distribution of moderator in the calandria and to avoid the impact of the jet on the neighbouring calandria tubes. An alternate scheme for moderator inlet has been conceived and engineered in which three lower peripheral lattice locations of the reactor are converted into moderator inlets. This is achieved by moderator sparger channels each containing a 5 m long perforated zircaloy-2 sparger tube rolled to the calandria tube sheets and extended by stainless steel tubular components (inserts) at both ends of a sparger channel. Moderator enters the sparger channel at both ends and flows into the calandria. In the absence of standard codes for design of rolled joints, it was requires to develop these joints based on trials followed by various tests. this paper discusses the details of the rolled joint developed for this purpose, the details of the trials with test results and optimization of rolling parameters for these joints

  10. Experimental study of the effect of neutron radiation on pressurised water reactor vessel steel resilience - First part

    International Nuclear Information System (INIS)

    Verdeau, Jean-Jacques

    1969-12-01

    After having outlined the importance of the embrittlement of vessel steels by neutrons during the exploitation of pressurised water reactors, the author reports a set of tests which aimed at determining the effect of neutron irradiation on vessel steel resilience for operated, under construction or projected pressurized water reactors. He also tries to highlight the influence of irradiation temperature and of initial thermal treatments, and to look for a restoration thermal treatment of neutron-induced damages which could be applied to the considered vessels. Tests were performed on V Charpy resilience samples. Some samples have been irradiated by the Pile Department of the Grenoble CEN and then broken by the Laboratory of very high activity, whereas other samples have been irradiated in a prototype vessel and broken by a Cadarache department. The author presents characteristics of the studied steels (chemical compositions, thermal treatments), describes sample irradiation conditions, and the method of assessment of the transition temperature after irradiation, presents experimental results, discusses their interpretation, and presents future tests to be performed [fr

  11. Vibration and acoustic signatures of the water circulation pump in the pressurised LMR fuel element test loop at IPEN

    International Nuclear Information System (INIS)

    Holland, L.

    1985-01-01

    This report presents results of vibration and acoustic field measurements made on the water circulating pump in the IPEN - CNEN/Sao Paulo pressurised water loop. The use of such measurements to monitor the vibration of coolant circulating pumps of light water reactors is indicated. Measurements were made for defined water flows and pressures varying between 5 bar/5.22 ls sup(-1) and 40 bar/17,42ls sup(-1). Analyses of various recordings of two accelerometer signals and 1 microphone signal were made principally in the frequency range 0-5 KHz using a Nicolet 660 A Fourier analyser. Results of these analyses indicate that CPSD distributions might be more sensitive indicators of changes in pump operating conditions than the more frequently used PSD distributions. In addition, as an indicador of changing pump conditions the acoustic-vibration signal pair is perhaps a more sensitive indicator than the vibration-vibration signal pair. While coherence distributions are elearly sensitive to changing pump conditions, trends in the change of these distributions were not readily identified. It is recommended that more detailed analyses be made using pattern recognition techniques in conjunction with frequency zooming. (Author) [pt

  12. Integration of acoustic emission systems within Integri-TechTM analysis system for structural health monitoring of pressurised engineering plant

    International Nuclear Information System (INIS)

    Ghouri, A A; Galbraith, Walter; Pierce, S Gareth; Gachagan, Anthony; Rafferty, Steven; Pickwell, Andy

    2015-01-01

    The aim of this Acoustic Emission (AE) based Structural Health Monitoring project is to enable accurate location of AE sources in pressurised engineering plant and to use AE source location data to establish defect locations for use within Integri-Tech TM ; a finite element based analysis, monitoring and fitness for service assessment system. Integri-Tech TM is a windows based system which carries out combined analysis and assessment providing fatigue life and remnant life calculations and inspection priorities presenting the results in an accessible web portal format. The software uses finite element stress models created in the companion software Model Wizard. The AE monitoring system that has been developed can be used with an array of up to four AE broad band sensor channels with associated signal processing. Using a flexible approach in MATLAB, the authors have developed algorithms which were used for analysing the received AE signals to extract information about the nature and location of the source. The ability to carry out source location and possibly perform real time monitoring (detecting cracking as it occurs) is attractive feature of the AE system developed for this project. The time of arrival (TOA) data was used by Integri-Tech TM software to calculate source location using its own built-in algorithm, and this was verified independently using a MATLAB approach. (paper)

  13. The effect of actuator nozzle designs on the electrostatic charge generated in pressurised metered dose inhaler aerosols.

    Science.gov (United States)

    Chen, Yang; Young, Paul M; Fletcher, David F; Chan, Hak Kim; Long, Edward; Lewis, David; Church, Tanya; Traini, Daniela

    2015-04-01

    To investigate the influence of different actuator nozzle designs on aerosol electrostatic charges and aerosol performances for pressurised metered dose inhalers (pMDIs). Four actuator nozzle designs (flat, curved flat, cone and curved cone) were manufactured using insulating thermoplastics (PET and PTFE) and conducting metal (aluminium) materials. Aerosol electrostatic profiles of solution pMDI formulations containing propellant HFA 134a with different ethanol concentration and/or model drug beclomethasone dipropionate (BDP) were studied using a modified electrical low-pressure impactor (ELPI) for all actuator designs and materials. The mass of the deposited drug was analysed using high performance liquid chromatography (HPLC). Both curved nozzle designs for insulating PET and PTFE actuators significantly influenced aerosol electrostatics and aerosol performance compared with conducting aluminium actuator, where reversed charge polarity and higher throat deposition were observed with pMDI formulation containing BDP. Results are likely due to the changes in plume geometry caused by the curved edge nozzle designs and the bipolar charging nature of insulating materials. This study demonstrated that actuator nozzle designs could significantly influence the electrostatic charges profiles and aerosol drug deposition pattern of pMDI aerosols, especially when using insulating thermoplastic materials where bipolar charging is more dominant.

  14. Heat treatments of irradiated uranium oxide in a pressurised water reactor (P.W.R.): swelling and fission gas release

    International Nuclear Information System (INIS)

    Zacharie, I.

    1997-01-01

    In order to keep pressurised water reactors at a top level of safety, it is necessary to understand the chemical and mechanical interaction between the cladding and the fuel pellet due to a temperature increase during a rapid change in reactor. In this process, the swelling of uranium oxide plays an important role. It comes from a bubble precipitation of fission gases which are released when they are in contact with the outside. Therefore, the aim of this thesis consists in acquiring a better understanding of the mechanisms which come into play. Uranium oxide samples, from a two cycles irradiated fuel, first have been thermal treated between 1000 deg C and 1700 deg C for 5 minutes to ten hours. The gas release amount related to time has been measured for each treatment. The comparison of the experimental results with a numerical model has proved satisfactory: it seems that the gases release, after the formation of intergranular tunnels, is controlled by the diffusion phenomena. Afterwards, the swelling was measured on the samples. The microscopic examination shows that the bubbles are located in the grain boundaries and have a lenticular shape. The swelling can be explained by the bubbles coalescence and a model was developed based on this observation. An equation allows to calculate the intergranular swelling in function of time and temperature. The study gives the opportunity to predict the fission gases behaviour during a fuel temperature increase. (author)

  15. Pressurised light water reactor failed fuel monitoring. Comparison of international strategies used in the surveillance of the primary barrier

    International Nuclear Information System (INIS)

    Aldworth, Robin; Dinse, Christelle; Mole, Didier

    2014-01-01

    As part of its focus on continuous improvement, the nuclear industry has devoted considerable effort to the prevention, monitoring, characterisation and impact mitigation of fuel failures. Failed fuel and primary circuit activity monitoring strategies have thus evolved over time, with utilities changing their strategies as a function of operational experience, regulator encouragement and improvements to scientific understanding. Differences among utility fuel monitoring strategies are therefore to be expected. This paper compares and analyses a selection of failed fuel and primary circuit activity monitoring strategies employed at French, American, South-African and Belgian pressurised water reactors (PWRs). These strategies, which were received in response to a questionnaire sent by Electricité de France, are discussed with a number of potential best practices and areas for future research and development being provided. Finally, and so as to ensure the utility of this paper with regards to the development, or evolution of, failed fuel monitoring strategies, this paper has been split into four sections representing the primary radiochemistry indicator groups: gross, calculated, fission products and activated corrosion products. (author)

  16. Artaud et les Tarahumaras

    Directory of Open Access Journals (Sweden)

    Marta Mariasole Raimondi

    2008-01-01

    Full Text Available Ce film propose des scènes de vie des Tarahumaras, une ethnie originaire du Mexique installée dans le territoire de l'Etat de Chiuahua, dans un milieu montagneux très sauvage. La caméra reprend les danses et les rites de ces mangeurs de peyotl d'un regard rapide et saccadé primant des cadrages de détail où prédominent les pieds, pour nous montrer ces corps d'homme et de femme en mouvement, courant, dansant, bondissant au milieu des leurs éléments naturels : rocailles, rivières, rochers, sans...

  17. Energy saving potential of energy services - experimentation on the life cycle of energy conversion equipment; Potentiel d'economies d'energie par les services energetiques - application au cycle de vie des equipements de conversion de l'energie

    Energy Technology Data Exchange (ETDEWEB)

    Dupont, M

    2006-12-15

    Energy efficiency services are growing in Europe but their role is still limited. In order to evaluate the potential, we focused first of all on policy, economical and environmental mechanisms that support their development. European natural gas and electricity markets, that are now almost wholly de-regulated, are analysed and compared to their historical structure. By introducing uncertainty on energy prices, this new deal translates better the real energy costs. Energy performance contracts (EPC) limit the impact of these uncertainties on the customer energy bills by guaranteeing a financial result. As a result of the modelling of these contracts, namely operation and maintenance ones, we prove that they transfer technical and financial risks from building owners to energy service companies (ESCO) making energy saving measures easier and less expensive at the same time. These contracts are relatively widespread for heating or compressed-air processes but remain marginal for air-conditioning systems. So new methods were needed to guarantee on the long terms the efficiency of air-conditioning systems demand (1) to master the process and its performances and (2) to be able to determine precisely the energy saving potential and its realisation costs. A detailed energy audit is thus necessary for which we propose a guidance. Conclusions of audits carried out prove that energy saving potential is mainly located in equipment management and control. These optimizations are not always carried out because of a lack of contractual incentive and due to the weaknesses of audit methods. Through the involvement of an independent expert, the mandatory and regular inspection of air-conditioning systems may allow to verify and guide such practices. A three-step analysis procedure has been developed in order to maximize the inspection potential and to get higher benefits from service contracts. (author)

  18. Adapting plant measurement data to improve hardware fault detection performance in pressurised water reactors

    International Nuclear Information System (INIS)

    Cilliers, A.C.; Mulder, E.J.

    2012-01-01

    Highlights: ► Attempt was to use available resources at a nuclear plant in a value added fashion. ► Includes plant measurement data and plant training and engineering simulator capabilities. ► Solving the fault masking effect by the distributed control systems in the plant. ► Modelling the effect of inaccuracies in plant models used in the simulators. ► Combination of above resulted in the development of a deterministic fault identifications system. -- Abstract: With the fairly recent adoption of digital control and instrumentation systems in the nuclear industry a lot of research now focus on the development expert fault identification systems. The fault identification systems enable detecting early onset faults of fault causes which allows maintenance planning on the equipment showing signs of deterioration or failure. This includes valve and leaks and small cracks in steam generator tubes usually detected by means of ultrasonic inspection. Detecting faults early during transient operation in NPPs is problematic due to the absence of a reliable reference to compare plant measurements with during transients. The distributed application of control systems operating independently to keep the plant operating within the safe operating boundaries complicates the problem since the control systems would not only operate to reduce the effect of transient disturbances but fault disturbances as well. This paper provides a method to adapt the plant measurements that isolates the control actions on the fault and re-introduces it into the measurement data, thereby improving plant diagnostic performance.

  19. Medical Issues: Equipment

    Science.gov (United States)

    ... Information Packets Equipment Pool Living With SMA Medical Issues Palliative Breathing Orthopedics Nutrition Equipment Daily Life At ... curesma.org > support & care > living with sma > medical issues > equipment Equipment Individuals with SMA often require a ...

  20. Les Cahiers du CREAD

    African Journals Online (AJOL)

    Admin

    Les opérations de croissance externe ayant une portée stratégique sont celles qui s'inscrivent dans une .... localisées dans des lieux différents, la politique de rationalisation est souvent ..... (recrutement de personnel, achat d'une machine, etc.) ...

  1. LES PAYS EN TRANSITION

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cathy Egan

    Cette définition englobe les transformations bien connues .... soutenus à tout le moins par un directeur régional, un directeur de programme au siège et le ... Innover, aussi bien sur le plan de la conception des programmes que sur celui.

  2. les cahiers du cread

    African Journals Online (AJOL)

    Our Journal “les cahiers du cread” is a quarterly economic review publishing original findings of empirical research and theoretical debates on fields pertaining to our mission coverage (Macro Economics, Industrial Economics and Firms, Human Development & Social Economics, Agriculture & Environment). Other websites ...

  3. Semiconductor Manufacturing equipment introduction

    International Nuclear Information System (INIS)

    Im, Jong Sun

    2001-02-01

    This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

  4. TSO Study Project on Development of a Common Safety Approach in the EU for Large Evolutionary Pressurised Water Reactors

    International Nuclear Information System (INIS)

    2001-10-01

    In pursuance of the objectives of the Council Resolutions of 1975 and 1992 on the technological issues of nuclear safety, the European Commission (EC) is seeking to promote a sustained joint in-depth study on possible significant future nuclear power reactor safety cases. To that end the EC decided to support financially a study by the grouping of the European Union Technical Safety Organisations (TSOG). The general objective of the study programme was to promote, through a collaboration of European Union Technical Safety Organisations (TSOs), common views on technical safety issues related to large evolutionary PWRs in Europe, which could be ready for operation during the next decade. AVN (Belgium) (Technical project leader), AEA Technology (United Kingdom), ANPA (Italy) CIEMAT (Spain), GRS (Germany), IPSN (France), were the TSOs participating in the study which was co-ordinated by RISKAUDIT. The study focused notably on the EPR project initiated by the French and German utilities and vendors. It also considered relevant projects, even of plants of different size, developed outside the European Union in order to provide elements important for the safety characterisation and which could contribute to the credibility and confidence of EPR. It is expected that this study will constitute a significant step towards the development of a common safety approach in EU countries. The study constitutes an important step forward in the development of a common approach of the TSOs to the safety of advanced evolutionary pressurised water reactors. This goal was mainly achieved by an in-depth analysis of the key safety issues, taking into account new developments in the national technical safety objectives and in the EPR design. For this reason the Commission has decided to publish at least the present summary report containing the main outcomes of the TSO study. Confidentiality considerations unfortunately prevent the open publication of the full series of reports. (author)

  5. The influence of long-range residual stress on plastic collapse of pressurised pipes with and without flaws

    International Nuclear Information System (INIS)

    Wu, Gui-Yi; Smith, David J.; Pavier, Martyn J.

    2013-01-01

    Structural integrity assessments of pressurised pipes include plastic collapse as a potential failure mode. This paper uses analytical and numerical models to explore the effect of the end conditions of the pipe on the collapse pressure. The pipe is open-ended and two bounding conditions are addressed: one where axial loading is applied to the ends of the pipe and the other where a fixed axial displacement is applied. The fixed axial displacement condition represents long-range or fit-up residual stress. It is common practice to treat long-range residual stress in the same way as axial loading, leading to the conclusion that such long-range residual stress reduces the collapse pressure. Pipes in a number of states are considered: pipes with no flaws, pipes with fully circumferential flaws and pipes with part circumferential flaws. The flaws consist of either a crack or a slot on the external surface of the pipe. For the axial load condition, the collapse pressure for a flawed pipe is reduced when higher magnitudes of tensile or compressive axial loads are applied. For the fixed displacement condition however, the magnitude of the displacement may have little or no effect on the collapse pressure. The results of the work indicate that substantially conservative assessments may be made of the collapse pressures of pipes containing flaws, when long-range residual stress is taken to be a form of axial loading. -- Highlights: • The effect of end conditions on the collapse pressure of a pipe has been explored. • Fixed displacement conditions represent long-range residual stress. • Long-range residual stress is commonly thought to contribute to plastic collapse. • We show long-range residual stress has no influence on collapse for flawed pipes. • It is therefore possible to reduce conservatism in structural integrity assessment

  6. The Pegase reactor loops; Les boucles du reacteur Pegase

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1968-07-01

    After 4 years operation, experimentation and maintenance of the gas loops built especially for the nuclear fuel testing reactor Pegase, it appears desirable not only to gather together in a single document the essential characteristics and particularities of these devices and of their associated equipment, but also to give the reasons for the technical modifications and the way in which they were carried out; this is done here by the persons themselves who were responsible, day after day, for operating these loops. This essentially practically experience thus complements the careful research and preliminary testing carried out on these loops or on their prototypes. It should be of interest to those who deal with problems concerned with the design or operation of irradiation loops in experimental reactors or of similar equipment. (authors) [French] Apres 4 annees de fonctionnement, d'experimentation et d'entretien sur les boucles a gaz, construites specialement pour le reacteur d'essai des combustibles nucleaires Pegase, il a paru souhaitable non seulement de rassembler dans un meme document les caracteristiques et les particularites essentielles de ces dispositifs et des appareillages qui leur sont associes, mais aussi d'y preciser les raisons et les modalites des mises au point techniques, apportees par ceux qui, jour apres jour pendant cette periode, ont eu la charge de mettre en oeuvre ces boucles. Cette experience essentiellement pratique complete donc les etudes minutieuses et les essais preliminaires de ces boucles ou de leurs prototypes. Elle doit etre de quelque interet pour ceux qui sont confrontes aux problemes de conception ou d'exploitation de boucles d'irradiation dans des reacteurs experimentaux ou des dispositifs analogues. (auteurs)

  7. Les Mayas à Hollywood.

    Directory of Open Access Journals (Sweden)

    Boris Jeanne

    2007-02-01

    Full Text Available Les Mayas de nos jours ce sont surtout des grandes pyramides au milieu de la forêt à un jet d’avion de Cancún : pour nombre de touristes américains et européens, c’est une occasion de s’acoquiner avec la culture, la grande culture des civilisations perdues, en continuant de boire des piña coladas le soir au bord de la plage. Et puis au mois de décembre les Mayas ont débarqué en force dans le paysage culturel local des Américains et des Européens, dans leurs cinémas, au moyen de deux films in...

  8. Les mots du jazz

    OpenAIRE

    Roueff, Olivier

    2007-01-01

    L’ouvrage d’André Schaeffner constitue la première analyse savante du jazz (1926). Il a marqué une étape importante dans le processus de réinvention du jazz en France en contribuant notamment, par sa réception et les polémiques qu’il a suscitées, à transformer l’identification du jazz d’une musique « américaine » à une musique « noire-américaine » (c’est-à-dire aux « racines » africaines). Les analyses proposées dans cet ouvrage, alors qu’elles désignaient des musiques que la critique de jazz...

  9. Les Cahiers du CREAD

    African Journals Online (AJOL)

    Admin

    politique de bas prix exercée par la Russie et le Qatar vient confirmer ce constat ; s'ajoute à cela l'entrée éventuelle du gaz non conven- tionnel, dont son prix actuel de 3/4 $US, offre aux USA l'opportunité d'être exportateur de ..... les compagnies à produire en matière du gaz naturel, tels le prix du gaz naturel, le prix des ...

  10. Les Tinamous. Tinami

    NARCIS (Netherlands)

    Schlegel, H.

    1880-01-01

    Les Tinamous forment une tribu d’oiseaux parfaitement isolée et circonscrite, et bornée à la partie de l’Amérique comprise entre le Mexico méridional et la Patagonie. Ils se rattachent, toutefois, naturellement à l’ordre des Gallinae, tout en offrant certaines affinités avec l’ordre des Autruches.

  11. les racines du gnosticisme

    African Journals Online (AJOL)

    5 déc. 2003 ... gonies orphiques, au vrai peu populaires, comprenaient trop d'éléments asia- tiques pour pouvoir être ..... n'est pas celle, intensément existentielle: 'Que dois-je faire pour être sauvé de mes péchés? ... thèmes astrologiques et magiques, des traditions égyptiennes.28 Dans les. Diagrammes Ophites, autre ...

  12. Les Cahiers du CREAD

    African Journals Online (AJOL)

    Admin

    6 juil. 2007 ... La problématique du développement du secteur de l'artisanat en. Algérie a été très peu abordée par les chercheurs, qu'ils soient universitaires ou .... La loi a institué une taxe d'apprentissage dont le taux a été fixé à. 1% de la ...

  13. Les Cahiers du CREAD

    African Journals Online (AJOL)

    Admin

    aux intérêts objectifs de leurs auteurs sans avoir été expressément conçue à cette fin » (Bourdieu P, (1980). Questions de sociologie, éd, Minuit, Paris, p119). De ce point de vue, notre objectif est de proposer une définition opérationnelle propre, touchant ...... les années comme critères de recrutement pour deux différents.

  14. Les tactiques de Chronos

    CERN Document Server

    Klein, Etienne

    2009-01-01

    Nous ne doutons pas de l'existence du temps, qui demeure pourtant un objet introuvable. Nous voyons, entendons, goûtons, touchons dans le temps, mais non le temps lui-même. Il concerne toute chose, contraint tout, mais de quelle façon ? Est-il apparu en même temps que l'univers ou l'a t-il précédé ? Est-il dans le monde ou le contient-il ? S'écoule-t-il en sens unique ? Serait-ce la mort qui nous obligerait à penser le temps ? Au XXe siècle, la physique a bouleversé notre conception du temps et en vient à effleurer des questions jusque la façon dont l'homme choisit de vivre et de se vivre. Quelles sont les convergences et les différence entre le temps physique et le temps sensible, existentiel ? Pour éclairer les paradoxes, répondre aux questions, Etienne Klein puise, en contrepoint de la physique, dans la philosophie, la psychologie, la littérature, ma poésie... et le sport.

  15. Selection of equipment for equipment qualification

    International Nuclear Information System (INIS)

    Torr, K.G.

    1989-01-01

    This report describes the methodology applied in selecting equipment in the special safety systems for equipment qualification in the CANDU 600 MW nuclear generating stations at Gentilly 2 and Point Lepreau. Included is an explanation of the selection procedure adopted and the rationale behind the criteria used in identifying the equipment. The equipment items on the list have been grouped into three priority categories as a planning aid to AECB staff for a review of the qualification status of the special safety systems

  16. An analysis of workers' tritium concentration in urine samples as a function of time after intake at Korean pressurised heavy water reactors.

    Science.gov (United States)

    Kim, Hee Geun; Kong, Tae Young

    2012-12-01

    In general, internal exposure from tritium at pressurised heavy water reactors (PHWRs) accounts for ∼20-40 % of the total radiation dose. Tritium usually reaches the equilibrium concentration after a few hours inside the body and is then excreted from the body with an effective half-life in the order of 10 d. In this study, tritium metabolism was reviewed using its excretion rate in urine samples of workers at Korean PHWRs. The tritium concentration in workers' urine samples was also measured as a function of time after intake. On the basis of the monitoring results, changes in the tritium concentration inside the body were then analysed.

  17. Evaluation of endcap welds in thin walled fuel elements of pressurised heavy water reactor by ultrasonic testing

    International Nuclear Information System (INIS)

    Subramanian, C.V.; Thavasimuthu, M.; Kalyansundaram, P.; Bhattacharya, D.K.; Raj, Baldev

    1992-01-01

    In the pressurised heavy water reactor systems of India, the fuel is encapsulated in thin-walled tubes (0.342 mm) closed with endcaps by resistance welding. The integrity of these fuel elements should be such that no fission gas leakage takes place during reactor operation. The quality control of the endcap welds needed to satisfy this requirement includes helium leak test and destructive metallographic test (on sample basis). This paper discusses the feasibility study that has been carried out in the author's laboratory to develop an immersion ultrasonic test method for evaluating the integrity of the endcap weld region. Through holes of various sizes (0.15mm, 0.2mm, 0.4mm diameter and 0.185mm and 0.342mm deep) were machined by spark erosion machining at the weld joints to simulate defects of various sizes. Line focussed probe of 10 MHz frequency was used for the testing. It was possible to detect clearly all the machined holes. Based on the above standardised procedure, further testing was done on endcap welds which were rejected during fabrication on account of showing leak rate of 3 x 10 -6 std. c.c/sec. or more during helium leak test. Though it was possible to get echoes from the natural defects in the rejected tubes with echo amplitude of 70%, the signal was accompanied by the geometrical reflection (noise) giving an amplitude of 20% from the weld region, giving rise to the problem of resolving the defect indication from the geometric indications. Therefore, signal analysis approach was adopted. The signal obtained from the weld zone were subjected to various analysis procedures like a) autopower spectrum, b) total energy content and c) demodulated auto correlation function. It was possible by all the three methods to differentiate the defect signal from those due to weld geometry or due to noise. Subsequently, metallography was carried out to characterise the type of defects observed during the ultrasonic testing. (author). 4 figs

  18. Two-phase flow experiments in a model of the hot leg of a pressurised water reactor. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, Tobias; Vallee, Christophe; Lucas, Dirk; Beyer, Matthias; Deendarlianto

    2011-09-15

    In order to investigate the two-phase flow behaviour in a complex reactor-typical geometry and to supply suitable data for CFD code validation, a model of the hot leg of a pressurised water reactor was built at FZD. The hot leg model is operated in the pressure chamber of the TOPFLOW test facility, which is used to perform high-pressure experiments under pressure equilibrium with the inside atmosphere of the chamber. This technique makes it possible to visualise the two-phase flow through large windows, also at reactor-typical pressure levels. In order to optimise the optical observation possibilities, the test section was designed with a rectangular cross-section. Experiments were performed with air and water at 1.5 and 3.0 bar at room temperature as well as with steam and water at 15, 30 and 50 bar and the corresponding saturation temperature (i.e. up to 264 C). The total of 194 runs are divided into 4 types of experiments covering stationary co-current flow, counter-current flow, flow without water circulation and transient counter-current flow limitation (CCFL) experiments. This report provides a detailed documentation of the experiments including information on the experimental setup, experimental procedure, test matrix and on the calibration of the measuring devices. The available data is described and data sheets were arranged for each experiment in order to give an overview of the most important parameters. For the cocurrent flow experiments, water level histograms were arranged and used to characterise the flow in the hot leg. In fact, the form of the probability distribution was found to be sensitive to the boundary conditions and, therefore, is useful for the CFD comparison. Furthermore, the flooding characteristics of the hot leg model plotted in terms of the classical Wallis parameter or Kutateladze number were found to fail to properly correlate the data of the air/water and steam/water series. Therefore, a modified Wallis parameter is proposed, which

  19. Development of Hplc Techniques for the Analysis of Trace Metal Species in the Primary Coolant of a Pressurised Water Reactor.

    Science.gov (United States)

    Barron, Keiron Robert Philip

    Available from UMI in association with The British Library. The need to monitor corrosion products in the primary circuit of a pressurised water reactor (PWR), at a concentration of 10pg ml^{-1} is discussed. A review of trace and ultra-trace metal analysis, relevant to the specific requirements imposed by primary coolant chemistry, indicated that high performance liquid chromatography (HPLC), coupled with preconcentration of sample was an ideal technique. A HPLC system was developed to determine trace metal species in simulated PWR primary coolant. In order to achieve the desired detection limit an on-line preconcentration system had to be developed. Separations were performed on Aminex A9 and Benson BC-X10 analytical columns. Detection was by post column reaction with Eriochrome Black T and Calmagite Linear calibrations of 2.5-100ng of cobalt (the main species of interest), were achieved using up to 200ml samples. The detection limit for a 200ml sample was 10pg ml^{-1}. In order to achieve the desired aim of on-line collection of species at 300^circ C, the use of inorganic ion-exchangers is essential. A novel application, utilising the attractive features of the inorganic ion-exchangers titanium dioxide, zirconium dioxide, zirconium arsenophosphate and pore controlled glass beads, was developed for the preconcentration of trace metal species at temperature and pressure. The performance of these exchangers, at ambient and 300^ circC was assessed by their inclusion in the developed analytical system and by the use of radioisotopes. The particular emphasis during the development has been upon accuracy, reproducibility of recovery, stability of reagents and system contamination, studied by the use of radioisotopes and response to post column reagents. This study in conjunction with work carried out at Winfrith, resulted in a monitoring system that could follow changes in coolant chemistry, on deposition and release of metal species in simulated PWR water loops. On

  20. Two-phase flow experiments in a model of the hot leg of a pressurised water reactor. Technical report

    International Nuclear Information System (INIS)

    Seidel, Tobias; Vallee, Christophe; Lucas, Dirk; Beyer, Matthias; Deendarlianto

    2011-09-01

    In order to investigate the two-phase flow behaviour in a complex reactor-typical geometry and to supply suitable data for CFD code validation, a model of the hot leg of a pressurised water reactor was built at FZD. The hot leg model is operated in the pressure chamber of the TOPFLOW test facility, which is used to perform high-pressure experiments under pressure equilibrium with the inside atmosphere of the chamber. This technique makes it possible to visualise the two-phase flow through large windows, also at reactor-typical pressure levels. In order to optimise the optical observation possibilities, the test section was designed with a rectangular cross-section. Experiments were performed with air and water at 1.5 and 3.0 bar at room temperature as well as with steam and water at 15, 30 and 50 bar and the corresponding saturation temperature (i.e. up to 264 C). The total of 194 runs are divided into 4 types of experiments covering stationary co-current flow, counter-current flow, flow without water circulation and transient counter-current flow limitation (CCFL) experiments. This report provides a detailed documentation of the experiments including information on the experimental setup, experimental procedure, test matrix and on the calibration of the measuring devices. The available data is described and data sheets were arranged for each experiment in order to give an overview of the most important parameters. For the cocurrent flow experiments, water level histograms were arranged and used to characterise the flow in the hot leg. In fact, the form of the probability distribution was found to be sensitive to the boundary conditions and, therefore, is useful for the CFD comparison. Furthermore, the flooding characteristics of the hot leg model plotted in terms of the classical Wallis parameter or Kutateladze number were found to fail to properly correlate the data of the air/water and steam/water series. Therefore, a modified Wallis parameter is proposed, which

  1. Controllable production of liquid and solid biofuels by doping-free, microwave-assisted, pressurised pyrolysis of hemicellulose

    International Nuclear Information System (INIS)

    Li, T.; Remón, J.; Shuttleworth, P.S.; Jiang, Z.; Fan, J.; Clark, J.H.; Budarin, V.L.

    2017-01-01

    Highlights: • Microwave pyrolysis of xylan in the absence of any external microwave absorber. • High energy-efficient and controllable production of biochar and bio-oil from xylan. • Water in liquid phase is needed for fast microwave pyrolysis. • Production of bio-oil and bio-char with HHVs 52% and 19% greater than that of xylan. - Abstract: Batch, pressurised microwave-assisted pyrolysis of hemicellulose in the absence of any external microwave absorber was found to be a promising route for the production of bio-based chemicals and biofuels. The experiments were conducted in a 10 mL batch reactor using a fixed power of 200 W employing different initial masses of xylan (0.1–0.7 g) for a maximum time, temperature and pressure of 10 min, 250 °C and 200 psi, respectively. The gas, bio-oil and solid (char) yields varied by 16–40%, 2–21% and 40–82%, respectively. Char production is preferential using a low amount of xylan (<0.25 g), while bio-oil production is favoured using a high amount of xylan (0.25–0.7 g). The effect of the sample mass is accounted for by the different physical state of the volatiles released during pyrolysis depending on the pressure attained during the experiment. This permits the process to be easily customised for the selective production of liquid (bio-oil) or solid (bio-char). Regarding the bio-oil, it is composed of a mixture of platform chemicals such as aldehydes, alkenes, phenols, polyaromatic hydrocarbons (PAHC), cyclic ketones and furans, with the composition varying depending on the initial mass of xylan. The char had a higher proportion of C together with a lower proportion of O than the original feedstock. Energy efficiencies of 100 and 26% were achieved for char and bio-oil production, respectively; thus leading to an increase in the HHV of the products (with respect to the original feedstock) of 52% for char and 19% for bio-oil.

  2. Association "Les Simples"

    OpenAIRE

    Thouzery, Michel

    2014-01-01

    Fondée par les producteurs du Syndicat Inter-Massifs pour la Production et l’Économie des Simples (S.I.M.P.L.E.S), l’association base son action sur la recherche et le maintien d’une production de qualité (herboristerie et préparations à base de plantes) qui prend en compte le respect de l’environnement et la pérennité des petits producteurs en zone de montagne. Actions de formation Stages de découverte de la flore médicinale sauvage, Stages de culture et transformation des plantes médicinale...

  3. Ergonomia e as atividades ocupacionais da equipe de enfermagem

    OpenAIRE

    Alexandre,Neusa Maria Costa

    1998-01-01

    Esse trabalho discute determinadas condições ergonômicas do trabalho que causam lesões no sistema músculo-esquelético da coluna vertebral, relacionando-as com as atividades ocupacionais da equipe de enfermagem.

  4. The pressurised water reactor

    International Nuclear Information System (INIS)

    Flood, M.; Chudleigh, R.; Conroy, C.

    1981-01-01

    The subject is covered in sections, entitled: energy forecasts - their decline and fall (Department of Energy; electricity supply industry; the writing on the wall); nuclear economics - how the dream dissolved (Britain's programme - off to a bad start; the government's programme -a catastrophe about to be repeated; the cost of a British PWR; a new choice - nuclear power versus insulation); PWR safety - the unresolvable problem (one in a million (query); fundamental weaknesses; consequences of an accident; unresolved safety problems; the select committee's findings); a new energy strategy - catering for our needs (energy efficiency; district heating/combined heat and power; solar heating; liquid fuels; the international context); conclusions. (U.K.)

  5. Les perspectives nutritionnelles offertes par les OGM en alimentation humaine

    Directory of Open Access Journals (Sweden)

    Pascal Gérard

    2004-03-01

    Full Text Available Une étude des brevets récents, des publications scientifiques ainsi que des documents présentant les projets des firmes de biotechnologie constituent la base de cet article qui présente les perspectives de développement en alimentation humaine des organismes génétiquement modifiés (OGM présentant un intérêt nutritionnel. Si l’on trouve dans les brevets et les publications scientifiques des applications qui concernent l’amélioration ou l’enrichissement de la composition en macro- et micronutriments, ces applications restent curieusement à l’état de projets, très loin de la mise sur le marché. Les critiques aussi bien que les louanges dont sont l’objet les rares cas dont on pourrait envisager une mise en œuvre à moyen terme, comme le « riz doré », sont aussi injustifiées et excessives les unes que les autres. Les violentes polémiques autour des OGM risquent de handicaper le développement d’une technique puissante, qui n’est certes pas indispensable pour apporter une solution à l’éradication de la faim dans le monde, mais qui peut apporter des améliorations à la nutrition des populations, aussi bien des populations des pays en développement que des pays développés.

  6. Archives: les cahiers du cread

    African Journals Online (AJOL)

    Items 1 - 24 of 24 ... Archives: les cahiers du cread. Journal Home > Archives: les cahiers du cread. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 24 of 24 Items. 2016 ...

  7. Effect of water chemistry on corrosion of stainless steel and deposition of corrosion products in high temperature pressurised water

    International Nuclear Information System (INIS)

    Morrison, Jonathan; Cooper, Christopher; Ponton, Clive; Connolly, Brian; Banks, Andrew

    2012-09-01

    In any water-cooled nuclear reactor, the corrosion of the structural materials in contact with the coolant and the deposition of the resulting oxidised species has long been an operational concern within the power generation industry. Corrosion of the structural materials at all points in the reactor leads to low concentrations of oxidised metal species in the coolant water. The oxidised metal species can subsequently be deposited out as CRUD deposits at various points around the reactor's primary and secondary loops. The deposition of soluble oxidised material at any location in the reactor cooling system is undesirable due to several effects; deposits have a porous structure, capable of incorporating radiologically active material (forming out of core radiation fields) and concentrating aggressively corrosive chemicals, which exacerbate environmental degradation of structural and fuel-cladding materials. Deposits on heat transfer surfaces also limit efficiency of the system as a whole. The work in this programme is an attempt to determine and understand the fundamental corrosion and deposition behaviour under controlled, simulated reactor conditions. The rates of corrosion of structural materials within pressurised water reactors are heavily dependent on the condition of the exposed surface. The effect of mechanical grinding and of electropolishing on the corrosion rate and structure of the resultant oxide film formed on grade 316L stainless steel exposed to high purity water, modified to pH 9.5 and 10.5 at temperatures between 200 and 300 deg. C and pressures of up to 100 bar will be investigated. The corrosion of stainless steel in water via electrochemical oxidation leads to the formation of surface iron, nickel and chromium based spinels. Low concentrations of these spinels can be found dissolved in the coolant water. The solubility of magnetite, stainless steels' major corrosion product, in high purity water will be studied at pH 9.5 to 10.5 at

  8. Former les jeunes chercheurs en vue d'influencer les politiques de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2 mai 2016 ... Les conférences, les séances de tutorat et les stages financés par le CRDI en Asie, en Afrique et en Amérique latine renforcent les capacités des jeunes chercheurs en vue d'éclairer les politiques de télécommunications. Communications Policy Research South (CPRsouth) : les conférences présentent les ...

  9. Les lueurs des sables

    CERN Multimedia

    Les lueurs des sables

    2013-01-01

    Two CERN ladies are getting ready for the “Trophée Roses des Sables” rally adventure: Julie and Laetitia are finalizing the last details before setting off on Monday 7th October 2013. Julie from EN-MEF group and Laetitia from DGS-SEE group, met at the CERN Rugby club. This year, they are participating in the 100 % female rally which will take place in Morocco from 10 to 20 October. They will be carrying along 100 kg of humanitarian donation for children such as some clothes, books and medical material. Do not hesitate to show your support at their farewell party to be held on Monday 7 October, from 4 to 6 pm in front of the St Genis-Pouilly Mairie (city Hall). Follow their exciting adventure on the blog leslueursdessables.trophee-roses-des-sables.org and on their association’s Facebook page Les Lueurs des Sables.

  10. Les Fleurs artificielles

    OpenAIRE

    Lucken, Michael

    2016-01-01

    L’image de Japonais imitateurs possède une longue histoire : en Europe, elle émerge au xviiie et a connu jusqu’à récemment différentes phases caractéristiques. Bien que liée à la modernisation, cette histoire n’éclaire pas uniquement la rencontre du Japon avec la culture européenne, elle est aussi le miroir des conceptions de l’art en Occident où des contremodèles étaient nécessaires afin de soutenir l’idée que la création est la valeur suprême. La première partie de ce livre a pour objectif ...

  11. Mathematical Model and Simulation of Gas Hydrate Reservoir Decomposition by Depressurization Modèle mathématique et simulation de dépressurisation et de décompression d’un réservoir d’hydrates de méthane

    Directory of Open Access Journals (Sweden)

    Zhao J.

    2012-05-01

    Full Text Available The numerical model for the depressurization of methane hydrates in a confined reservoir is presented based on mass conservation in porous media, incorporating multiphase flow theory and kinetics of gas hydrate dissociation. The universal implicit difference method is adopted, and the corresponding computer program is developed. During the production of the hydrate reservoir, distribution and the physical changes are analyzed and the gas hydrate dissociation and gas production law are studied from the computation. A numerical simulation shows that the reservoir pressure is descending slowly, which benefits the stabilization of the reservoir and inevitably decreases the efficiency in the production of gas hydrates in the depressurizing process. The gas production rate is controlled by the well pressure. The results are presented to show how this model may be used to estimate a lower downhole pressure of the well for hydrate recovery and how these results depend on reservoir and hydrate properties. Le modèle numérique présenté ici simule la dépressurisation d’hydrates de méthane dans un réservoir confiné; il se base sur le principe de conservation de la masse en milieu poreux, en intégrant la théorie de l’écoulement polyphasique et la cinétique de dissociation des hydrates de méthane. La méthode implicite et universelle des différences finies est utilisée et le programme informatique qui s’y rapporte est développé. Lors de l’exploitation du réservoir d’hydrates de méthane, la répartition et les changements physiques sont analysés et les lois sur la dissociation des hydrates de méthane et la production de gaz sont étudiées à partir des calculs. Une simulation numérique montre que la pression dans le réservoir diminue lentement, ce qui permet au réservoir de se stabiliser et diminue inévitablement le rendement de l’exploitation d’hydrates de méthane lors du processus de dépressurisation. Le rythme de

  12. Les jardins de la physique

    CERN Document Server

    Allemand, Luc

    2017-01-01

    À l'écart du monde, loin des laboratoires, en contact avec la nature, des savants réputés du monde entier viennent enseigner les grands sujets de la physique et partager les dernières avancées avec de nombreux élèves. À l'écart du monde, loin des laboratoires, en contact avec la nature, des savants réputés du monde entier viennent enseigner les grands sujets de la physique et partager les dernières avancées avec de nombreux élèves. Ces hauts-lieux sont propices à la méditation et procurent autant d'opportunités de rencontres et d'échanges. La liberté de pensée qui y règne permet d'explorer de nouvelles pistes pour la physique de demain. Car les grandes découvertes surviennent rarement comme des illuminations : elles résultent plutôt de lentes maturations, accompagnées de travail acharné et de discussions suivies. De tels lieux existent depuis les années 1950 en France : l'Institut d'Études scientifiques de Cargèse, en Corse, et l'École de Physique des Houches, dans les Alpes, ...

  13. Les figures multiples du maire.

    Directory of Open Access Journals (Sweden)

    Olivier Lebraud

    2004-06-01

    Full Text Available Alors même que l’ensemble du personnel gouvernemental et parlementaire est sujet à une relative désaffection de la part des citoyens, les maires français jouissent, on le sait, d’une popularité qui fait d’eux les figures centrales de la scène politique. Au-delà de la décentralisation, qui a souvent renforcé leur image de décideurs, ils ont su tirer parti de la dimension identitaire qui caractérise l’échelon communal pour devenir les acteurs indispensables de la vie locale. ...

  14. Les attaques des Termites (Isoptera) dans les parcelles de ...

    African Journals Online (AJOL)

    SARAH

    31 août 2016 ... habitations, les agro systèmes et les pâturages dans une savane sahélienne à Matam. (Sénégal). Mémoire de DEA, Université Ch. A. Diop de Dakar, pp. 51. Silvestri F : 1914-15. Contribuzione alla conoscenza dei. Termitidi e Termitophili dell'Africa occidentale. I. Termitidi. Bolletino del Laboratorio di ...

  15. Les changements climatiques et l'urbanisation menacent les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    5 sept. 2014 ... Cette perception correspond-elle aux données scientifiques ? Shah Alam Khan. Dans les quatre villes étudiées, on observe effectivement de réels changements dans les précipitations annuelles, mais pas nécessairement une diminution. À Gurgaon, il y aurait diminution selon l'opinion générale, ce qui ...

  16. Renforcer les partenariats entre les conseils subventionnaires de la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les conseils subventionnaires de la recherche scientifique sont essentiels au financement et à la promotion de la recherche et de l'innovation. Une récente étude de délimitation de la portée financée par le CRDI a souligné le rôle important qu'ils jouent dans les réseaux scientifiques nationaux en Afrique subsaharienne.

  17. Les chercheurs inquiets malgre les promesses de Claudie Haignere

    CERN Multimedia

    2003-01-01

    "Le 9 avril, lors d'un colloque sur l'innovation, la ministre deleguee a la recherche et aux nouvelles technologies a annonce, "en plein accord, dit-elle, avec le premier ministre", que "les etablissements publics a caractere scientifique et technologique (EPST) ne connaitront en 2003 aucune nouvelle annulation de credits de paiement et d'autorisations de programme" et que "les reserves de precaution sont entierement levees" (1 page).

  18. Les dyslipidemies et antiretroviraux chez les personnes vivant avec ...

    African Journals Online (AJOL)

    hypercholestérolémie, l'hyper LDL-cholestérolémie, l'hypo HDLcholestérolémie ont été retrouvées respectivement chez 41,4%, 23,5% et 17,4% des patients. La différence n'est pas significative entre les fréquences des troubles lipidiques chez les ...

  19. Les approches multisectorielles pour prévenir les grossesses ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet vise à générer, à travers une recherche opérationnelle, des connaissances sur le phénomène des grossesses précoces et de développer des stratégies multisectorielles, centrées sur les adolescents et prenant en compte les acteurs du système de l'éducation, de la santé, du milieu judiciaire et des communautés.

  20. LES VIBRIONS DANS LES PRODUITS DE LA PÊCHE

    African Journals Online (AJOL)

    PC_WINDOWS

    Santé Publique (ENSP) à Rennes et le Centre National de Référence des vibrions et du Choléra (CNRVC) à l'Institut Pasteur ... l'Alimentation, en France, dans le but de normaliser les protocoles d'étude et de recherche de V. cholerae et ..... Vibrio présente dans l'environnement avec les méthodes de détection habituelles.

  1. Les institutions sportives et les pouvoirs publics en Afrique noire ...

    African Journals Online (AJOL)

    La restitution plus fine des données archivées et leur analyse plus approfondie révèlent alors que : la réexportation des pratiques socioéducatives de l'école vers les clubs civils s'est plutôt arrimée aux enjeux économiques, politiques, diplomatiques et dans une moindre mesure éducatifs, tant et si bien que les acteurs ...

  2. Les representations sociales des musees par les jeunes de la ...

    African Journals Online (AJOL)

    La participation culturelle des jeunes reste un élément fondamental de la vie sociale. Ainsi, les musées sont des institutions culturelles qui contribuent à cette perspective. Mais, il est à constater que les visites muséales sont presque absentes des activités culturelles des jeunes. Le présent article propose une analyse des ...

  3. Association entre les hormones sexuelles, les marqueurs de ...

    African Journals Online (AJOL)

    Introduction: Le présent travail se propose d'étudier la relation entre les hormones sexuelles, notamment l'oestradiol et l'indice de l'oestradiol libre, le sulfate de déhydroépiandrosterone et la sex hormone binding globulin, les marqueurs de remodelage osseux et la densité minérale osseuse chez une population de ...

  4. Isolation by pressurised fluid extraction (PFE) and identification using CPC and HPLC/ESI/MS of phenolic compounds from Brazilian cherry seeds (Eugenia uniflora L.).

    Science.gov (United States)

    Oliveira, Alessandra L; Destandau, Emilie; Fougère, Laëtitia; Lafosse, Michel

    2014-02-15

    Brazilian cherry seeds are a waste product from juice and frozen pulp production and, the seeds composition was investigated to valorize this by-product. Compounds separation was performed with ethanol by pressurised fluid extraction (PFE). Here we determine the effect of temperature (T), static time (ST), number of cycles (C), and flush volume (VF) on the yield, composition and total phenolic content (TPC) of the seed extracts. T, ST and their interaction positively influenced yield and TPC. Extracts were fractionated by high performance liquid chromatography (HPLC) and centrifugal partition chromatography (CPC). The collected fractions characterizations were made by electrospray ionisation mass spectrometry (ESI/MS) and high resolution mass spectrometry (HRMS) indicated the presence of ellagic acid pentoside and deoxyhexose, quercitrin and kaempferol pentoside. All of these compounds have antioxidant properties and normally are found in plant extracts. These results confirm that Brazilian cherry seed extract is a potentially valuable source of antioxidants. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Optimisation of pressurised liquid extraction (PLE) for rapid and efficient extraction of superficial and total mineral oil contamination from dry foods.

    Science.gov (United States)

    Moret, Sabrina; Scolaro, Marianna; Barp, Laura; Purcaro, Giorgia; Sander, Maren; Conte, Lanfranco S

    2014-08-15

    Pressurised liquid extraction (PLE) represents a powerful technique which can be conveniently used for rapid extraction of mineral oil saturated (MOSH) and aromatic hydrocarbons (MOAH) from dry foods with a low fat content, such as semolina pasta, rice, and other cereals. Two different PLE methods, one for rapid determination of superficial contamination mainly from the packaging, the other for efficient extraction of total contamination from different sources, have been developed and optimised. The two methods presented good performance characteristics in terms of repeatability (relative standard deviation lower than 5%) and recoveries (higher than 95%). To show their potentiality, the two methods have been applied in combination on semolina pasta and rice packaged in direct contact with recycled cardboard. In the case of semolina pasta it was possible to discriminate between superficial contamination coming from the packaging, and pre-existing contamination (firmly enclosed into the matrix). Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Shipboard and laboratory equipment

    Digital Repository Service at National Institute of Oceanography (India)

    Shyamprasad, M.; Ramaswamy, V.

    The polymetallic nodules occur at an average depth of 4500 m. Adequate equipment and techniques are required for the exploration at such depths. Shipboard and various laboratory equipments for the sampling of polymetallic nodules is described...

  7. Remote handling equipment

    International Nuclear Information System (INIS)

    Clement, G.

    1984-01-01

    After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

  8. Exercise Equipment: Neutral Buoyancy

    Science.gov (United States)

    Shackelford, Linda; Valle, Paul

    2016-01-01

    Load Bearing Equipment for Neutral Buoyancy (LBE-NB) is an exercise frame that holds two exercising subjects in position as they apply counter forces to each other for lower extremity and spine loading resistance exercises. Resistance exercise prevents bone loss on ISS, but the ISS equipment is too massive for use in exploration craft. Integrating the human into the load directing, load generating, and motion control functions of the exercise equipment generates safe exercise loads with less equipment mass and volume.

  9. BP volume reduction equipment

    International Nuclear Information System (INIS)

    Kitamura, Yoshinori; Muroo, Yoji; Hamanaka, Isao

    2003-01-01

    A new type of burnable poison (BP) volume reduction system is currently being developed. Many BP rods, a subcomponent of spent fuel assemblies are discharged from nuclear power reactors. This new system reduces the overall volume of BP rods. The main system consists of BP rod cutting equipment, equipment for the recovery of BP cut pieces, and special transport equipment for the cut rods. The equipment is all operated by hydraulic press cylinders in water to reduce operator exposure to radioactivity. (author)

  10. Les migrants de Beyrouth

    Directory of Open Access Journals (Sweden)

    Agnès Deboulet

    2009-03-01

    Full Text Available Depuis la fin de la guerre (1990 l’importation d‘une main-d’œuvre peu qualifiée majoritairement féminine est devenue massive au Liban. Qu’ils soient en situation régulière ou non, des migrants non arabes dits « temporaires » ou « en transit », mais dont certains sont là depuis une dizaine d’années, ont fait leur entrée sur le marché du travail et tentent de s’inscrire, pour nombre d’entre eux, dans un « milieu » aux identités multiples et conflictuelles dans des quartiers périphériques où il est plus facile de trouver à se loger. En s’appuyant sur des enquêtes de terrain menées dans la banlieue de Bourj-Hammoud à l’est de Beyrouth et dans les quartiers sud de Jnah et de Ouzaï, les auteures décrivent des situations migratoires qui sans être généralisables n’en sont pas moins exemplaires de la place de cette main-d’œuvre immigrée.Since the end of the war, in 1990, unqualified, mostly feminine, workers have been massively entering Lebanon. Whether they have regular registration or not, non-Arab, so-called ‘temporary’, or ‘transit’ migrants have entered the labour market, but some of them have been there for about ten years. Many try to join the mixed, full of conflicts environment of peripheral districts, in which it is easier to find housing. Using fieldwork they have been conducting in the Borj-Hamoud suburb, in the east of Beirut, and Jnah and Ouzaï, in the south, the authors describe migratory situations which, although they cannot be applied generally, are nevertheless a good example of the place held by these immigrant

  11. LES MALADIES NEUROLOGIQUES OBSERVEES EN ...

    African Journals Online (AJOL)

    LES MALADIES NEUROLOGIQUES OBSERVEES EN HOSPITALISATION, SUR UNE PERIODE DE 10 ANS DANS LA REGION DU DELTA AU NIGERIA NEUROLOGIC ADMISSIONS IN THE NIGER DELTA AREA OF NIGERIA – A TEN YEAR REVIEW (English)

  12. Les Miserables (2012) : Motion Picture

    OpenAIRE

    Lauri Lucente, Gloria; Buhagiar, Celaine

    2013-01-01

    Les Miserables : In 19th-century France, Jean Valjean, who for decades has been hunted by the ruthless policeman Javert after breaking parole, agrees to care for a factory worker's daughter. The decision changes their lives for ever.

  13. Les violences conjugales à Dakar

    Science.gov (United States)

    Soumah, Mohamed Maniboliot; Issa, Abdoul Wahab; Ndiaye, Mor; Ndoye, El Hadj Oumar; Sow, Mamadou Lamine

    2015-01-01

    L'objectif était d’évaluer les aspects épidémiologiques des violences conjugales, identifier les facteurs de risques et les différents types de violences conjugales, évaluer les conséquences des violences conjugales sur la santé des victimes, afin d'améliorer la prise en charge des victimes et la prévention du phénomène. Il s'est agit d'une étude transversale effectuée de décembre 2012 à janvier 2013 à Dakar. Les données ont été recueillies, après consentement, sur fiche d'enquête anonyme soumise à toute personne volontaire vivant en couple et résidant à Dakar. L'analyse statistique a été effectuée avec le logiciel SPSS 13.0. Le nombre de personnes victimes de violences conjugales était de 60 soit 37,30% dont 31 femmes (51,70%) et 29 hommes (48,30%). Le sex-ratio était de 0,93. Parmi les victimes, 53 étaient scolarisées soit 88,30%. Le régime matrimonial était de type monogame dans 39 cas (65%) et polygame dans 21 cas (35%). La vie en couple durait depuis moins de 11 ans dans 60% des cas et durait de 11 ans à 20 ans au plus dans 26,6% des cas. L’étude des types de violences montrait la fréquence des agressions physiques. Les armes utilisées étaient surtout les armes naturelles. Les principaux facteurs de risque de violence conjugale sont les facteurs sociodémographiques, culturels et économiques comme le jeune âge, l'inégalité du genre, les jeunes couples, la précarité, le niveau d'instruction élevé. La prise en charge des victimes et la prévention du phénomène restent insuffisantes dans nos pays. PMID:26918077

  14. Le CRDI dans les Philippines

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le CRDI appuie la recherche dans les. Philippines depuis 1972. Le travail qu'y ont accompli des universités et des instituts de recherche vigoureux et la participation active de la société civile ont entraîné d'importantes améliorations dans les domaines de l'agriculture, du suivi de la pauvreté et de la gestion des forêts.

  15. Comportements Sexuels parmi les Adolescents et Jeunes

    African Journals Online (AJOL)

    AJRH Managing Editor

    Cette étude a comme objectif spécifique d'analyser les prévalences des comportements sexuels à risque et leurs facteurs sociaux dans les pays francophones d'Afrique subsaharienne parmi les adolescents et jeunes, en mettant en exergue les diversités entre pays. Les données utilisées sont celles des Enquêtes ...

  16. Carbonation of Mg(OH){sub 2} in a pressurised fluidised bed for CO{sub 2} sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Fagerlund, J.

    2012-07-01

    To date, a number of methods to accelerate natural weathering or in other words increase the CO{sub 2} uptake rate of various minerals have been suggested; commonly this is known as mineral carbonation or CO{sub 2} mineralisation. A brief literature review of recently published articles in this field is presented, showing that the interest in mineral carbonation is increasing. However, it should be noted that mineral carbonation is only one option in a larger portfolio of various carbon dioxide capture and storage (CCS) alternatives. Unlike many other options, the CO{sub 2} mineralisation option considered in this thesis is largely founded on the possibility to utilise the exothermic nature of magnesium carbonation and based on this notion, it has been divided into three steps. The first two steps are energy demanding, while the third step is energy 'negative', and in theory, the source of the energy required in the first two steps. Unfortunately, however, the energy demanded by the first two steps, Mg extraction and Mg(OH){sub 2} production, is (currently) much higher than what could be generated by the subsequent Mg(OH){sub 2} carbonation step. Nevertheless, opportunities to reduce the energy intensity of the process in question are still being investigated, and while an energy-neutral carbonation process might be difficult to achieve, energy requirements can still be rendered industrially acceptable (and comparable to or even better than for other CCS methods). The main focus of this thesis lies with the third step, Mg(OH){sub 2} carbonation, which is performed using a pressurised fluidised bed (PFB). The elevated CO{sub 2} pressure conditions (typically approx 20 bar) allow for the carbonation reaction to take place at higher temperatures (typically approx 500 deg C) than otherwise due to thermodynamic constraints on carbonate stability. The increase in reaction rate as a function of temperature follows the Arrhenius equation of exponential increase

  17. Methodologies and technologies for life assessment and management of coolant channels of Indian pressurised heavy water reactors

    International Nuclear Information System (INIS)

    Rupani, B.B.; Sinha, S.K.; Sinha, R.K.

    2002-01-01

    Zirconium alloy coolant channels are central to the design of Indian Pressurised Heavy Water Reactors (PHWRs) and form the individual pressure boundaries. These coolant channels consist of horizontal pressure tubes made of zirconium alloys, which are separated from cold calandria tubes using garter spring spacers. High temperature heavy water coolant flows through the pressure tube which supports the fuel bundles. A typical coolant channel in a PHWR is shown. These pressure tubes are subjected to several life limiting degradation mechanisms like creep and growth, hydrogen pick-up, reduction in fracture toughness and delayed hydride cracking phenomena because of their operation under high temperature, high stress and high fast neutron flux environment. Considering the early onset of these degradation mechanisms in Zircaloy-2 pressure tubes used in the early generation of Indian PHWRs, the life management of these coolant channels becomes a challenging task, involving multidisciplinary R and D efforts in areas like analytical modelling of degradation mechanisms, evolution of methodologies for assessment of fitness for service and, tools and techniques for remote on line monitoring of integrity, maintenance and replacement. The degradation mechanisms have been modelled and incorporated into specially developed computer codes, such as SCAPCA for irradiation induced creep and growth deformation modelling, HYCON for hydrogen pick-up modelling, BLIST for hydrogen diffusion, blister nucleation and growth modelling and CEAL for assessment of leak before break behaviour. These codes have been validated with respect to the results of in-service inspection and post irradiation examination. Development of analytical models actually paved the way for the evolution of more refined methodologies for assessing the safe residual life of coolant channel. Information gathered from various experiments simulating the degradation mechanisms, results of post-irradiation examination of the

  18. Winter School Les Houches

    CERN Document Server

    Lannoo, Michel; Bastard, Gérald; Voos, Michel; Boccara, Nino

    1986-01-01

    The Winter School held in Les Houches on March 12-21, 1985 was devoted to Semiconductor Heterojunctions and Superlattices, a topic which is recognized as being now one of the most interesting and active fields in semiconductor physics. In fact, following the pioneering work of Esaki and Tsu in 1970, the study of these two-dimensional semiconductor heterostructures has developed rapidly, both from the point of view of basic physics and of applications. For instance, modulation-doped heterojunctions are nowadays currently used to investigate the quantum Hall effect and to make very fast transistors. This book contains the lectures presented at this Winter School, showing in particular that many aspects of semiconductor heterojunctions and super­ lattices were treated, extending from the fabrication of these two-dimensional systems to their basic properties and applications in micro-and opto-electron­ ics. Among the subjects which were covered, one can quote as examples: molecular beam epitaxy and metallorgani...

  19. Electrical equipment qualification

    International Nuclear Information System (INIS)

    Farmer, W.S.

    1983-01-01

    Electrical equipment qualification research programs being carried out by CEA, JAERI, and Sandia Laboratories are discussed. Objectives of the program are: (1) assessment of accident simulation methods for electrical equipment qualification testing; lower coarse (2) evaluation of equipment aging and accelerated aging methods; (3) determine radiation dose spectrum to electrical equipment and assess simulation methods for qualification; (4) identify inadequacies in electrical equipment qualification procedures and standards and potential failure modes; and (5) provide data for verifying and improving standards, rules and regulatory guides

  20. Controverses sur les sucres [Controversies about sugars

    Directory of Open Access Journals (Sweden)

    Malika BOUCHENAK

    2016-12-01

    Full Text Available La surconsommation de sucres ajoutés et leurs effets putatifs sur diverses pathologies cardiométaboliques continuent de susciter des controverses. Dans les années 1950, le taux élevé de maladies cardiovasculaires (MCV, chez les hommes Américains a conduit à des études sur le rôle des facteurs alimentaires, tels que le cholestérol, les phytostérols, l'excès de calories, les acides aminés, les graisses, les glucides, les vitamines et les minéraux, à influencer le risque de MCV. Dans les années 60, deux éminents physiologistes, plaidant pour des hypothèses causales divergentes de MCV, John Yudkin a identifié les sucres ajoutés comme agent primaire, tandis que Ancel Keys identifiait les graisses totales, les graisses saturées et le cholestérol alimentaire. Cependant, dans les années 80, peu de scientifiques croyaient que les sucres ajoutés jouaient un rôle important dans la maladie coronarienne, et les premiers conseils nutritionnels de 1980 (1980 Dietary Guidelines for americans étaient axés sur la réduction des graisses totales, des graisses saturées et du cholestérol alimentaire pour la prévention des MCV.

  1. Les brulures electriques chez les voleurs de cuivre

    Science.gov (United States)

    Belmir, R.; Fejjal, N.; Achbouk, H.; El Mazouz, S.; Gharib, N.; Abassi, A.; Belmahi, A.

    2011-01-01

    Summary Les vols de biens fabriqués avec le cuivre semblent en hausse depuis un certain temps du fait de son prix élevé de revente, ce qui est à l’origine d’une augmentation du nombre d’accidents électriques par haut voltage (AEHV) qui sont graves du fait des brûlures profondes qu’elles provoquent le long des axes vasculo-nerveux. Les Auteurs rapportent une série de neuf cas d’AEHV traités au service de chirurgie plastique et de brûlés de l’Hôpital Ibn Sina de Rabat, Maroc, à travers laquelle ils étudient les caractéristiques épidémiologiques, cliniques et thérapeutiques. La population intéressée était jeune et active. Les brûlures étaient secondaires à un contact avec des câbles à haute tension lors de tentatives de vol par arrachement de conducteurs en cuivre dans les transformateurs dans 67% des cas, et lors de tentatives de coupure de caténaires alimentant les trains électriques sur le réseau ferroviaire dans 33% des cas. Le traitement des lésions électrothermiques a nécessité des interventions itératives avec amputation et désarticulation des segments de membres nécrosés dans 66% des cas, dont les suites étaient marquées par des séquelles fonctionnelles invalidantes. La prévention de ce type d’AEHV reste fondamentale. PMID:22262961

  2. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  3. Renewal of radiological equipment.

    Science.gov (United States)

    2014-10-01

    In this century, medical imaging is at the heart of medical practice. Besides providing fast and accurate diagnosis, advances in radiology equipment offer new and previously non-existing options for treatment guidance with quite low morbidity, resulting in the improvement of health outcomes and quality of life for the patients. Although rapid technological development created new medical imaging modalities and methods, the same progress speed resulted in accelerated technical and functional obsolescence of the same medical imaging equipment, consequently creating a need for renewal. Older equipment has a high risk of failures and breakdowns, which might cause delays in diagnosis and treatment of the patient, and safety problems both for the patient and the medical staff. The European Society of Radiology is promoting the use of up-to-date equipment, especially in the context of the EuroSafe Imaging Campaign, as the use of up-to-date equipment will improve quality and safety in medical imaging. Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or renewal. This plan should look forward a minimum of 5 years, with annual updates. Teaching points • Radiological equipment has a definite life cycle span, resulting in unavoidable breakdown and decrease or loss of image quality which renders equipment useless after a certain time period.• Equipment older than 10 years is no longer state-of-the art equipment and replacement is essential. Operating costs of older equipment will be high when compared with new equipment, and sometimes maintenance will be impossible if no spare parts are available.• Older equipment has a high risk of failure and breakdown, causing delays in diagnosis and treatment of the patient and safety problems both for the patient and the medical staff.• Every healthcare institution or authority should have a plan for medical imaging equipment upgrade or replacement. This plan should look forward a

  4. Self reliance in equipment building for PHWR fuel fabrication

    International Nuclear Information System (INIS)

    Sastry, V.S.; Hemantha Rao, G.V.S.; Jayaraj, R.N.

    2009-01-01

    Full text: Keeping in tune with the policy of self-reliance and indigenisation adopted from the very inception of nuclear power programme in India during the mid 1960, Nuclear Fuel Complex, established in the year 1971, developed its own processes, equipment and technologies based on both in-house experience and the expertise available in the indigenous industry. Starting from the basic raw materials, Nuclear Fuel Complex (NFC) manufactures and supplies finished fuel assemblies, apart from zircaloy core components, to all the nuclear power stations in India. Out of several products manufactured by NFC, 19 and 37 element fuel bundles for Pressurised Heavy Water Reactors (PHWRs) is vital for operation of several PHWRs being operated by Nuclear Power Corporation of India Limited (NPCIL). Starting from the manufacturing of half-charge for RAPS-1, more than 3.8 lakh fuel bundles were made till now. Several process improvements were taken up over the years for improving the quality of the fuel. PHWR fuel bundles manufactured by NFC has adopted an unique feature of joining appendages on zirconium alloy tubes by resistance welding before loading natural uranium dioxide pellets. Graphite coating on the inner surface of the zirconium alloy tube and vacuum baking, use of profiled end caps, use of bio-degradable cleaning agents are some of the processes adopted in the manufacturing of PHWR fuel bundles. With the recent opening up of international nuclear trade for India and the enhanced growth of nuclear power, exciting opportunities and challenges confront NFC. This paper presents salient features of some important special purpose equipment developed in-house at NFC for production of PHWR fuel bundles. It looks ahead to develop many more such special purpose equipment towards meeting the diverse demands now showing up to meet the indigenous as well as international requirements

  5. Les gens, et non les choses, calment les eaux de la lagune de Tam ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cathy Egan

    La lagune de Tam Giang au Viet Nam est un habitat naturel presque parfait pour la pêche et l'aquaculture. Longue de plus de 70 km et d'une profondeur moyenne d'à peine deux mètres, la lagune est un milieu des plus productifs, tant pour les espèces d'eau douce que pour les espèces marines. Au cours des dernières ...

  6. Les institutions de recherche sur les politiques et les ODD liés à la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le nouveau site Web facilitera l'enregistrement des événements démographiques afin d'améliorer l'accès aux services pour tous. Le nouveau site Web et la nouvelle bibliothèque de ressources aideront à améliorer les systèmes d'information et d'enregistrement des faits d'état civil dans les pays en développement.

  7. Les adjectifs à valeur intensive dans les groupes nominaux

    Directory of Open Access Journals (Sweden)

    Buvet Pierre-André

    2012-07-01

    Full Text Available Un dictionnaire électronique est élaboré dans la perspective du Traitement Automatique des Langues. Il s'agit d'une ressource qui est exploité par un ensemble d'outils informatiques pour donner lieu à une application dédiée au traitement de l'information textuelle. Le dictionnaire électronique présenté dans l'article concerne principalement des adjectifs prédicatifs à forme simple qui ont fait l’objet d’un recensement exhaustif et qui ont été décrits formellement. Sa macrostructure est constituée de plus de 20 000 emplois adjectivaux. Sa microstructure comporte des descripteurs normalisés de telle sorte que les informations métalinguistiques stipulées permettent d'effectuer des analyses sémantiques fines. Les adjectifs prédicatifs à forme complexe sont également incorporés au dictionnaire; ils sont décrits comme les adjectifs prédicatifs à forme simple dans la mesure où ils fonctionnent de la même façon. Dans un premier temps, nous discutons de la notion d'adjectif prédicatif en précisant préalablement les notions de prédicat et d'emploi prédicatif ainsi que celles de signification lexicale et de signification grammaticale. Nous présentons les marqueurs de l’intensité qui correspondent à des adjectifs monolexicaux et prédicatifs ou bien polylexicaux et prédicatifs. Nous discutons de ces adjectifs dans un premier temps selon qu’il s’agit de modifieurs libres, dans un deuxième temps de modifieurs liés et dans un troisième temps de constituants d’une détermination figée. Nous précisons dans les trois cas de figure quelles sont les conditions d’occurrences des adjectifs prédicatifs dans les groupes nominaux en nous appuyant sur les descriptions des adjectifs et des déterminants du français qui proviennent de deux bases de données exhaustives.

  8. Réduire les risques et les pertes attribuables aux changements ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    22 août 2014 ... Entre-temps, dans les pays plus riches, comme le Japon et les États‑Unis, les bâtiments et l'infrastructure font l'objet de nouvelles conceptions visant à prévenir les conséquences des tremblements de terre. Quelle comparaison feriez‑vous entre les plans d'adaptation aux tremblements de terre et les ...

  9. Les changements climatiques brouillent les prédictions des faiseurs ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    8 oct. 2010 ... Depuis des générations, les autochtones de l'ouest du Kenya comptent sur les pouvoirs mystiques que possèdent les « faiseurs de pluie » du clan Nganyi pour prédire la météo. Cependant, le temps instable amené par les changements climatiques brouille les indices grâce auxquels les faiseurs de pluie ...

  10. ["Les Impatients": expression through art].

    Science.gov (United States)

    Lamontagne, Céline; Palardy, Lorraine

    2015-01-01

    The organization called "Les Impatients" was founded in 1992. Using a unique model, Les Impatients welcomes those with mental health issues who would like to express themselves through art. Les Impatients offers free creative workshops and encourages exchanges with the community through the sharing of its participants' creations. The name Les Impatients reinforces the idea that the organization does not consider those attending its workshops as patients, but rather creators who are eager to heal, develop their craft and find their place in society. The participants contribute to the collective objective of breaking down the stigma that surrounds mental illness.Les Impatients collaborates with various mental health organizations in Quebec, such as the Institut universitaire en santé mentale de Montréal (IUSMM) affiliated to the Université de Montréal, Douglas Mental Health University Institute (DMHUI), the Centre de santé et services sociaux Drummond (CSSS Drummond) and the Centre de santé et services sociaux Pierre-Boucher (CSSS Pierre-Boucher). Les Impatients offers more than 48 workshops in eight different locations to around 450 participants each week.Dissemination activities, remarkable events, original projects: Les Impatients stands out through its realizations. Examples are exhibitions, collections of love letters, comic books, CD, concerts, and reading nights. The organization's originality resides in the exploration of the links between the work of the participants and that of professional artists. An illustration of this interest is the annual Parle-moi d'amour auction-exhibition, which has been one of Les Impatients' major events since 1999.As part of its mission, Les Impatients conserves the works of art created by the participants during the workshops. Its collection includes more than 15,000 works of art from Les Impatients as well as pieces donated by collectors of unconventional art, commonly known as "art brut" or "outsider art". The

  11. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  12. Max Planck et les quanta

    CERN Document Server

    Boudenot, Jean-Claude

    2016-01-01

    « Les atomes, dit Jean Perrin en 1913, ne sont pas ces éléments éternels et insécables dont l'irréductible simplicité donnait au possible une borne, et, dans leur inimaginable petitesse, nous commençons à pressentir un fourmillement prodigieux de mondes nouveaux ». C'est bien dans un monde totalement nouveau, le monde quantique, que nous a fait pénétrer la découverte des quanta par Max Planck. Son article de 1900 est le déclencheur de l'une des plus grandes révolutions scientifiques de tous les temps. Les trente années qui suivent sont les plus riches de la physique ; Planck, Einstein, Bohr, Sommerfeld, de Broglie, Schrödinger, Heisenberg, Dirac, Born, Pauli… reconstruisent la physique sur de nouvelles bases sur fond de conflit des générations. Le monde est par ailleurs secoué par la guerre, Max Planck est tourmenté et vit des épreuves personnelles dramatiques. C'est l'homme, aussi bien que l'oeuvre, que les auteurs ont tenté de dépeindre dans cet ouvrage. Ils ont également souhait�...

  13. Avis 4 sur les nanosciences et les nanotechnologies

    OpenAIRE

    Centre de Coopération Internationale en Recherche Agronomique pour le Développement

    2012-01-01

    À l'échelle nanométrique, l’imbrication entre savoirs et savoir-faire est telle que la distinction entre nanosciences et nanotechnologies devient artificielle, le Comité entendant à travers les “nanotechnologies” la profonde continuité qui prévaut au sein des sciences fondamentales et des technologies.[br/] Le Comité a dressé un panorama des applications avérées et potentielles des nanotechnologies dans le domaine de l’agriculture et de l’alimentation, y compris dans les pays du Sud, tou...

  14. Medical equipment management

    CERN Document Server

    Willson, Keith; Tabakov, Slavik

    2013-01-01

    Know What to Expect When Managing Medical Equipment and Healthcare Technology in Your Organization As medical technology in clinical care becomes more complex, clinical professionals and support staff must know how to keep patients safe and equipment working in the clinical environment. Accessible to all healthcare professionals and managers, Medical Equipment Management presents an integrated approach to managing medical equipment in healthcare organizations. The book explains the underlying principles and requirements and raises awareness of what needs to be done and what questions to ask. I

  15. Data communication equipment

    International Nuclear Information System (INIS)

    Kim, Hak Seon; Lee, Sang Mok

    1998-02-01

    The contents of this book are introduction of data communication on definition, purpose and history, information terminal about data communication system and data transmission system, data transmit equipment of summary, transmission cable, data port, concentrator and front-end processor, audio communication equipment like phones, radio communication equipment of summary on foundation of electromagnetic waves, AM transmitter, AM receiver, FM receiver and FM transmitter, a satellite and mobile communication equipment such as earth station, TT and C and Cellular phone, video telephone and new media apparatus.

  16. DONNEES PRELIMINAIRES SUR LES HABITUDES ...

    African Journals Online (AJOL)

    Administrateur

    Le régime alimentaire des chauves-souris paillées, Eidolon helvum (Kerr, 1792) de la commune du Plateau à Abidjan, Côte d'Ivoire a été étudié d'août 2007 à juillet 2008, en vue de connaître sa composition et de déterminer la préférence alimentaire de ces animaux, ainsi que les variations saisonnières. Les résultats.

  17. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

  18. Capital Equipment Replacement Decisions

    OpenAIRE

    Batterham, Robert L.; Fraser, K.I.

    1995-01-01

    This paper reviews the literature on the optimal replacement of capital equipment, especially farm machinery. It also considers the influence of taxation and capital rationing on replacement decisions. It concludes that special taxation provisions such as accelerated depreciation and investment allowances are unlikely to greatly influence farmers' capital equipment replacement decisions in Australia.

  19. Les bourses du CRDI appuient les futurs chefs de file dans le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 mai 2015 ... Un programme de bourses de recherche du CRDI appuie les recherches novatrices et renforce le leadership futur et les connaissances sur les TIC, les ... Internet, la radio communautaire et la vidéo participative, présentent un fort potentiel pour faire face aux répercussions des changements climatiques et ...

  20. Les faits,une arme contre

    International Development Research Centre (IDRC) Digital Library (Canada)

    les anime. Les villages avoisinants s'en inspirent : neuf d'entre eux ont demandé des conseils pour aménager des potagers. Selon les habitants de Lilbouré, les autres veulent suivre leur exemple. Mais, rappelle leur porte-parole, le progrès a un coût : il faut s'organiser, participer aux réunions, verser ses cotisations, tenir ...

  1. Comment diffuser les savoirs à travers les Alpes ?

    Directory of Open Access Journals (Sweden)

    Wolfgang Pfefferkorn

    2009-03-01

    Full Text Available CIPRA’s Future in the Alps Project aims at showcasing examples of successful implementation and successful projects in the Alps, and making available to others the extensive pool of experience and practical knowledge that lies in these projects. But how to transfer knowledge in an area of some 14 million inhabitants with several linguistic and cultural regions in which thousands of projects are carried out each year, that all kinds of players who work and life in completely different contexts are able to learn and benefit from one another? How do you go about something like that?Le projet « Avenir dans les Alpes » de la CIPRA (Commission Internationale pour la Protection des Alpes a pour objectif de présenter des exemples de réalisations et de projets réussis dans les Alpes, et de mettre à disposition du public l’ensemble de l’expérience et des connaissances pratiques acquises dans le cadre de ces projets. Cependant, comment transférer les savoirs dans une zone comptant quelque 14 millions d’habitants, composée de plusieurs régions linguistiques et culturelles dans lesquelles des milliers de projets sont menés à bien chaque année, et dont tous les acteurs, qui travaillent et vivent dans des contextes complètement différents, sont capables d’apprendre et de tirer profit les uns des autres ? Comment aborder ce genre de cas ?

  2. Proceedings of the European Symposium on Pressure Equipment - ESOPE 2007; Actes des Journees d'Etudes Europeennes Equipements sous Pression - ESOPE 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    orientations retained for pressure equipments used in the nuclear industry, the European standards and the international collaboration, the Chinese standards and finally the recent developments of the codes and standards of the ASME in the USA. ESOPE 2007 also includes a Poster Session organized in the context of the international exhibition, which allows the companies to present their industrial realizations in parallel to the Symposium. (author) [French] Tous les trois ans, et depuis maintenant trente ans, l AFIAP organise un symposium ou les experts et acteurs oeuvrant dans le domaine des equipements sous pression, qu'ils soient fixes ou transportables, peuvent se rencontrer et echanger sur tous les developpements touchant a leur activite. Ce qui etait dans un premier temps denomme 'Congres national sur la technologie des appareils a pression', puis 'Journees d'etude sur les appareils a pression', est devenu depuis 2001 les 'Journees d'etude Europeennes sur les equipements sous pression' ou encore 'European Symposium on Pressure Equipment' (ESOPE), marquant ainsi une volonte d'ouverture a l'Europe et a l'international dans un contexte marque par la mise en oeuvre des directives europeennes applicables a ces equipements. Les journees 2001 furent plus particulierement consacrees a la mise en oeuvre des directives harmonisant la construction des equipements, et les journees 2004 ont ete plus particulierement axees sur la gestion des equipements en service. Pour le symposium ESOPE 2007, le comite d organisation a souhaite reprendre ces deux themes sous les aspects de la securite et de la competitivite, ainsi que de l'innovation. La seance pleniere du dernier jour sera entierement consacree a ces themes et comportera une Table Ronde ou s'exprimeront des representants nationaux et europeens des pouvoirs publics, des representants des fabricants et utilisateurs, ainsi que des experts engages dans la

  3. Les Fintech sont-elles une opportunité ou une menace pour les banques traditionnelles ?

    OpenAIRE

    Blanc, Aldwin; Sonney, Frédéric

    2018-01-01

    Dans ce travail, nous étudierons les potentielles opportunités et menaces que sont les Fintech pour les institutions bancaires. Cela nous permettra de savoir si, à l’avenir, ces entreprises vont s’imposer et remplacer les banques telles que nous les connaissons ou alors aider, forcer les acteurs traditionnels à effectuer leur révolution numérique pour répondre aux nouvelles attentes des clients. Afin de répondre à cette interrogation, les trois strates de l’environnement bancaire ont été anal...

  4. Territorialisation et enclaves littorales dans les îles de la Caraïbe

    Directory of Open Access Journals (Sweden)

    Michel Desse

    2008-04-01

    Full Text Available Les littoraux de la Caraïbe ont longtemps été considérés comme des espaces de l’envers, ouverts, libres, propriété de l’Etat donc de tous, opposables à la plantation qui hiérarchise la société, structure le paysage et identifie la richesse.Aujourd’hui, les littoraux constituent les centres fonctionnels des îles, annexés parfois privatisés, ils apparaissent fortement territorialisés. Les facteurs qui expliquent ces transformations sont multiples. Les îles connaissent une forte tertiairisation ...

  5. Les présages expliqués

    CERN Document Server

    Belly

    2015-01-01

    Extrait : ""Les Romains et les Grecs avaient emprunté aux Chaldéens la plupart des arts divinatoires : Ce que disent les caractères de l'Écriture. Ce que disent les lignes du visage. Ce que disent les traits du visage. Ce que disent les cartes, etc.""

  6. Special equipment for processing can-rupture measurements; Equipement specialise de traitement des mesures de rupture de gaines

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, J.; Phalippou, J.; Dumont, D.; Viellard, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Recent installations for detecting can-rupture in nuclear reactors use, in the measurement processing section, a digital computer, either completely or partially. The reliability of the system is limited by that of the computer, which represents a common point for the processing of data from the detector. In order to satisfy the demands imposed by safety considerations for the operation of the equipment it is necessary to consider the possibility of installing a second computer in certain cases. The use of a computer involves the presence as interface between the detection equipment and the computer itself, of sealers operating as integrators for the pulses produced by the detector. By adding a certain number of circuits to these sealers, it is possible to carry out the work now demanded of the computer, as far as the calculation is concerned. This reasoning has led us to a so-called 'decentralized' solution involving the construction of specialized equipment in the region of the prospector itself. We believe that this solution, apart from the reliability point of view, has definite economic advantages. In our solution, the common point in the processing of the data is now situated not in the zone of the production of results but further down, in the printing out of these results. Even in the case of an incident at the common point, the results are produced, exposed and compared to the alarm thresholds. In the case of a breakdown of the specialized equipment, the results from this prospector are no longer available but the others continue to operate. It seems that this solution is more reliable than that employing universal computers. By using an interchangeable drawer system (MULTIBLOC) it is possible to replace rapidly any of the specialized equipment which breaks down. The systematic use of integrated circuits (TTL) ensures an increased reliability of the equipment. (author) [French] Les installations recentes de detection de rupture de gaines

  7. LES GOITRES PLONGEANTS : PARTICULARITES CLINIQUES ...

    African Journals Online (AJOL)

    SUBSTERNAL GOITERS : SPECIAL CLINICAL,. RADIOLOGICAL AND THERAPEUTIC. M. Ben Amor, S. Dhambri, I. Hariga, W. Abid, R. Hannachi, O. Ben Gamra, S. Zribi, CH. .... L'indication chirurgicale est formelle dans les goitres plon- geantsdevant le risque de détresse respiratoire aiguë met- tant en jeu le pronostic vital ...

  8. Les femmes et la terre

    International Development Research Centre (IDRC) Digital Library (Canada)

    La terre, qui relie les aspects économique, culturel, politique et juridique de la vie ..... Le plan stratégique de 2001-2011 à l'égard du secteur foncier (Ouganda, ...... nommées aux commissions par le ministère, le recrutement se fait au moyen ...

  9. The Effect of Temperature on Pressurised Hot Water Extraction of Pharmacologically Important Metabolites as Analysed by UPLC-qTOF-MS and PCA

    Directory of Open Access Journals (Sweden)

    B. S. Khoza

    2014-01-01

    Full Text Available Metabolite extraction methods have been shown to be a critical consideration for pharmacometabolomics studies and, as such, optimization and development of new extraction methods are crucial. In the current study, an organic solvent-free method, namely, pressurised hot water extraction (PHWE, was used to extract pharmacologically important metabolites from dried Moringa oleifera leaves. Here, the temperature of the extraction solvent (pure water was altered while keeping other factors constant using a homemade PHWE system. Samples extracted at different temperatures (50, 100, and 150°C were assayed for antioxidant activities and the effect of the temperature on the extraction process was evaluated. The samples were further analysed by mass spectrometry to elucidate their metabolite compositions. Principal component analysis (PCA evaluation of the UPLC-MS data showed distinctive differential metabolite patterns. Here, temperature changes during PHWE were shown to affect the levels of metabolites with known pharmacological activities, such as chlorogenic acids and flavonoids. Our overall findings suggest that, if not well optimised, the extraction temperature could compromise the “pharmacological potency” of the extracts. The use of MS in combination with PCA was furthermore shown to be an excellent approach to evaluate the quality and content of pharmacologically important extracts.

  10. Simultaneous quantification of major flavonoids in "Bawanghua", the edible flower of Hylocereus undatus using pressurised liquid extraction and high performance liquid chromatography.

    Science.gov (United States)

    Yi, Yan; Zhang, Qing-Wen; Li, Song-Lin; Wang, Ying; Ye, Wen-Cai; Zhao, Jing; Wang, Yi-Tao

    2012-11-15

    A pressurised liquid extraction (PLE) and high performance liquid chromatography (HPLC) method was developed for simultaneous quantification of six major flavonoids in edible flower of Hylocereus undatus. In order to achieve the baseline separation of two pairs of isomers, the HPLC conditions were optimised with different kind of reversed phase columns and mobile phase gradient programs. In addition, the solvent concentration, extraction temperature, extraction time and flush cycle for PLE were also optimised. Zorbax SB-C8 (100×2.1 mm, 1.8 μm) column was chosen with acetonitrile and water containing 0.1% trifluoroacetic acid as mobile phase, the six analytes were eluted with baseline separation. The calibration curves showed good linearity (r(2)>0.9994) with LODs and LOQs less than 0.90 and 3.60 ng respectively. The RSDs for intra- and inter-day repeatability was not more than 1.09% and 1.79% respectively. The overall recovery of the assay was 96.9-105.2%. The sample was stable for at least 12 h. The newly established method was successfully applied to quantify six flavonoids in different parts of "Bawanghua", and the commercial samples from different locations. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Inegalites entre les garçons et les filles dans l'evaluation en ...

    African Journals Online (AJOL)

    Cette recherche se propose d'étudier les inégalités entre les garçons et les filles dans l'évaluation en Education Physique et Sportive dans les collèges et surtout de connaître leurs sentiments par vis-à-vis de cette évaluation. Cette étude aura pour cadre les établissements secondaires de Porto-Novo et environs.

  12. Les métamorphoses du livre

    OpenAIRE

    Chartier, Roger

    2015-01-01

    Après avoir étudié les conditions de production et de diffusion traditionnelles des livres lors des « Rendez-vous de l'édition », la Bibliothèque propose, en prolongement de ce cycle, les rencontres « Les rendez-vous de l'édition : le livre et le numérique », afin de donner au public des informations et des repères pour comprendre les évolutions en cours. En effet, les technologies numériques permettent de développer ou de renouveler de nombreux produits et services : édition en ligne, livre...

  13. Semaine alpine 2008 : innover (dans) les Alpes

    OpenAIRE

    Bourdeau, Philippe; Bourdeau, Philippe; Corneloup, Jean; Corneloup, Jean; Finger-Stich, Andréa; Finger-Stich, Andréa; Giraut, Frédéric; Giraut, Frédéric; Kohler, Yann; Kohler, Yann; Macchiavelli, Andrea; Macchiavelli, Andrea; Scheurer, Thomas; Scheurer, Thomas; Ullrich, Aurelia

    2009-01-01

    Ce premier dossier en ligne se penche sur une question de grande actualité : l’innovation, pour interroger les conceptions et mises en œuvre de démarches innovantes dans les contextes montagnards. Ces textes sont issus de la « Semaine alpine », qui s’est déroulée en juin 2008 à l’Argentière-La Bessée, dans les Hautes-Alpes (France). Ces « Semaines alpines », en alternance avec les « Forums alpins », rassemblent tous les deux ans des chercheurs et des acteurs locaux de l’ensemble de l’arc alp...

  14. HVAC systems and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, S.T. (Linford Air and Refrigeration Company, Oakland, CA (US))

    1990-02-01

    The author discusses the section of the ASHRAE Standard 90.1-1989 which addresses HVAC systems and equipment. New features of HVAC systems mandatory general requirements are described. New prescriptive requirements are detailed.

  15. Personal Protective Equipment

    National Research Council Canada - National Science Library

    1998-01-01

    ... of personal protective equipment A safety program for new employees is a necessary part of any orientation program An on-going safety program should be used to motivate employees to continue to use...

  16. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  17. CV equipment responsibilities

    CERN Document Server

    Pirollet, B

    2008-01-01

    This document describes the limits of the responsibilities of the TS/CV for fire fighting equipment at the LHC. The various interfaces, providers and users of the water supply systems and clean water raising systems are described.

  18. Equipment for hydraulic testing

    International Nuclear Information System (INIS)

    Jacobsson, L.; Norlander, H.

    1981-07-01

    Hydraulic testing in boreholes is one major task of the hydrogeological program in the Stripa Project. A new testing equipment for this purpose was constructed. It consists of a downhole part and a surface part. The downhole part consists of two packers enclosing two test-sections when inflated; one between the packers and one between the bottom packer and the bottom of the borehole. A probe for downhole electronics is also included in the downhole equipment together with electrical cable and nylon tubing. In order to perform shut-in and pulse tests with high accuracy a surface controlled downhole valve was constructed. The surface equipment consists of the data acquisition system, transducer amplifier and surface gauges. In the report detailed descriptions of each component in the whole testing equipment are given. (Auth.)

  19. Un projet gagnant sur tous les tableaux : les moustiquaires ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    15 juil. 2011 ... La trousse est un des principaux éléments du projet de marketing social des moustiquaires imprégnées (connue sous le sigle anglais SMITN) lancé par ... je ne crois pas que la Tanzanie aurait eu assez de preuves pour prendre la décision d'implanter les moustiquaires imprégnées à l'échelle du pays » ...

  20. Les femmes se tournent vers les arbres fourragers pour engraisser ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    12 févr. 2018 ... Photo : CRDI / Bartay Au Mali, les moutons sont associés à des rites de passage traditionnels et à des fêtes religieuses, mais ils sont aussi une source importante de revenus. Toutefois, la disponibilité et le coût des aliments constituent une contrainte majeure en matière de production ovine, surtout en ...

  1. Le CERN et les Institutions

    CERN Document Server

    Barbalat, Oscar

    1996-01-01

    Une première partie de l'exposéŽ sera consacrée àˆ une brève description des principaux organes de l'Union EuropéŽennne: Conseil, Parlement et Commission ainsi que la structure de la Commission. On passera ensuite en revue le Programme-Cadre de Recherche et DéŽveloppement Technologique et les principaux programmes spéŽcifiques auxquels participe le CERN (ESPRIT, ACTS, TMR) On situera ensuite les autres organisations et initiatives scientifiques européŽennes (ESA, ESO, ESRF, JET, ISTC, EUREKA, ...) pour terminer par une brève revue des relations entre le CERN avec ces difféŽrentes institutions en déŽveloppant plus particulièrement celles avec la Commission.

  2. La Tentation et les savoirs

    Directory of Open Access Journals (Sweden)

    Gisèle Séginger

    2009-01-01

    Full Text Available Malgré son inactualité apparente, La Tentation de Saint Antoine se rattache à une série de savoirs, de recherches historiques, d’interrogations qui caractérisent son époque et définissent une configuration épistémologique. Les savoirs sont impliqués à deux niveaux : dans l’organisation de la poétique de l’œuvre, dans les représentations de l’œuvre. Flaubert utilise des savoirs historiques, anthropologiques et psychiatriques qui légitiment l’organisation du texte et les déconstruit en même temps. Il invente une nouvelle forme de grotesque – le grotesque des idées – et met en abyme un questionnement sur les savoirs qui évolue de la première Tentation à celle de 1874.Despite its apparent irrelevancy to Flaubert's time, La Tentation de Saint Antoine is linked to a net of knowledge, historical research, questions that characterize a period and define an epistemological configuration. These types of knowledge are at play on two levels: in the organization of the poetics of the work and in its representations. Flaubert uses historical, anthropological and psychiatric knowledge which legitimates the organization of the text while at the same time he deconstructs this body of knowledge. Flaubert invents a new form of grotesque – the grotesque of ideas – and, in a mise-en-abyme from the first Tentation to the 1874 version, he questions these fields of knowledge.

  3. Du mucilage chez les algues

    NARCIS (Netherlands)

    Wildeman, de É.

    1942-01-01

    En examinant en 1939 dans une note présentée à l’Académie des Sciences de Belgique une étude de M. Ronse, nous avons été amené à reprendre des considérations sur les mucilages des végétaux et en particulier sur ceux des algues (22; 31). Déjà en 1891, dans nos ”Observations algologiques“ nous avons

  4. Prise en charge des intoxications par envenimation chez les enfants ...

    African Journals Online (AJOL)

    Les signes cliniques étaient dominés par les douleurs (98%) suivies des hémorragies (73,80%) pour les morsures de serpent, la douleur pour les piqures de scorpion (100%) et les oedèmes pour les piqures d'abeilles (100%). Les cas de morsure de serpent ont été traités par le sérum antivenimeux polyvalent. Conclusion: ...

  5. Equipment abnormality monitoring device

    International Nuclear Information System (INIS)

    Ando, Yasumasa

    1991-01-01

    When an operator hears sounds in a plantsite, the operator compares normal sounds of equipment which he previously heard and remembered with sounds he actually hears, to judge if they are normal or abnormal. According to the method, there is a worry that abnormal conditions can not be appropriately judged in a case where the number of objective equipments is increased and in a case that the sounds are changed gradually slightly. Then, the device of the present invention comprises a plurality of monitors for monitoring the operation sound of equipments, a recording/reproducing device for recording and reproducing the signals, a selection device for selecting the reproducing signals among the recorded signals, an acoustic device for converting the signals to sounds, a switching device for switching the signals to be transmitted to the acoustic device between to signals of the monitor and the recording/reproducing signals. The abnormality of the equipments can be determined easily by comparing the sounds representing the operation conditions of equipments for controlling the plant operation and the sounds recorded in their normal conditions. (N.H.)

  6. Prioritizing equipment for replacement.

    Science.gov (United States)

    Capuano, Mike

    2010-01-01

    It is suggested that clinical engineers take the lead in formulating evaluation processes to recommend equipment replacement. Their skill, knowledge, and experience, combined with access to equipment databases, make them a logical choice. Based on ideas from Fennigkoh's scheme, elements such as age, vendor support, accumulated maintenance cost, and function/risk were used.6 Other more subjective criteria such as cost benefits and efficacy of newer technology were not used. The element of downtime was also omitted due to the data element not being available. The resulting Periop Master Equipment List and its rationale was presented to the Perioperative Services Program Council. They deemed the criteria to be robust and provided overwhelming acceptance of the list. It was quickly put to use to estimate required capital funding, justify items already thought to need replacement, and identify high-priority ranked items for replacement. Incorporating prioritization criteria into an existing equipment database would be ideal. Some commercially available systems do have the basic elements of this. Maintaining replacement data can be labor-intensive regardless of the method used. There is usually little time to perform the tasks necessary for prioritizing equipment. However, where appropriate, a clinical engineering department might be able to conduct such an exercise as shown in the following case study.

  7. Les découvreurs

    CERN Document Server

    Boorstin, Daniel

    1986-01-01

    Sous une forme vivante, enlevée, très personnelle, Les Découvreurs raconte la plus grande épopée de l'homme : celle de sa quête pour découvrir le monde qui l'entoure. Daniel Boorstin s'écarte volontairement de la traditionnelle et fastidieuse énumération des batailles, des naissances d'empires et des grands règnes : avec lui, l'histoire de notre monde devient une féerie de découvertes et de commencements. En chaque découverte d'importance, que ce soit celle de l'Amérique par Christophe Colomb ou celle de la relativité par Einstein, il voit un épisode d'une biographie. Les héros de la saga qu'il nous raconte sont des hommes dotés d'une insatiable frénésie de connaissance et d'un courage exemplaire pour affronter l'inconnu. Daniel Boorstin nous fait découvrir sous un jour nouveau des noms familiers : Hérodote, Ptolémée, Marco Polo, Copernic, Newton, Marx, Freud, et ressuscite également quelques figures remarquables oubliées de l'histoire. Pour quelles raisons les Chinois n'ont-ils pas...

  8. Radioactive decontamination of equipment

    International Nuclear Information System (INIS)

    1982-03-01

    After a recall of some definitions relating to decontamination techniques and of the regulation into effect, the principles to be respected to arrange rationally work zones are quoted while insisting more particularly on the types of coatings which facilitate maintenance operations and the dismantling of these installations. Then, the processes and equipments to use in decontamination units for routine or particular operations are described; the list of recommended chemical products to decontaminate the equipment is given. The influence of these treatments on the state and the duration of life of equipments is studied, and some perfectible methods are quoted. In the appendix, are given: the limits of surface contamination accepted in the centers; a standard project which defines the criteria of admissible residual contamination in wastes considered as cold wastes; some remarks on the interest that certain special ventilation and air curtain devices for the protection of operators working on apparatus generating contaminated dusts [fr

  9. Improvement of the calculation of the stress intensity factors for underclad and through-clad defects in a reactor pressure vessel subjected to a pressurised thermal shock

    International Nuclear Information System (INIS)

    Marie, S.; Chapuliot, S.

    2008-01-01

    The analysis of the stability of a defect in a cladded reactor pressure vessel (RPV) of a nuclear pressure water reactor (PWR) subjected to pressurised thermal shock (PTS) is one main elements of the general safety demonstration. Recently, CEA proposed several improved analytical tools for the analysis of the PTS. First, an analytical solution for the vessel through-thickness temperature variation has been developed to deal with any fluid temperature, taking into account the possible presence of a cladding, in the case of an internal PTS. The associated thermal stress expression has been simplified and a complete linearised solution is given for the thermal loading and also for internal pressure, depending on the main vessel material and on the cladding properties. Finally, a complete compendium is also given for the elastic stresses intensity factor calculation. This paper proposes several improvements of the proposed analytical method to deal with a PTS in a PWR cladded vessel. A variable heat transfer coefficient is now taken into account based on an equivalent fluid temperature variation determination, associated with a constant heat transfer coefficient, to keep the same thermal exchange between the fluid and the inner skin of the vessel obtained with the initial data. A more accurate expression for the linearised stresses due to the internal pressure is given, and a possible effect of residual stresses due to the difference between the operating temperature and the stress-free temperature is also taken into account. Finally, an extension of the domain of definition of the influence functions for the elastic stress intensity factor calculation is given

  10. Utilising DualEELS to probe the nanoscale mechanisms of the corrosion of Zircaloy-4 in 350 °C pressurised water

    Energy Technology Data Exchange (ETDEWEB)

    Annand, Kirsty J., E-mail: k.annand.1@research.gla.ac.uk [Materials and Condensed Matter Physics, School of Physics and Astronomy, University of Glasgow, Glasgow G12 8QQ (United Kingdom); MacLaren, Ian [Materials and Condensed Matter Physics, School of Physics and Astronomy, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Gass, Mhairi [AMEC Foster Wheeler, Clean Energy, Walton House, Birchwood Park, WA3 6GA (United Kingdom)

    2015-10-15

    Characterisation of materials utilised for fuel cladding in nuclear reactors prior to service is integral in order to understand corrosion mechanisms which would take place in reactor. Zircaloy-4 is one such material of choice for nuclear fuel containment in Pressurised Water Reactors (PWRs). In particular, the metal-oxide interface has been a predominant focus of previous research, however, due to the complex oxidation process of zirconium cladding, there is still no clear understanding of what is present at the interface. Using Scanning Transmission Electron Microscopy (STEM) and Dual Electron Energy Loss Spectroscopy (DualEELS), we have studied the corrosion of this material under conditions similar to those that could be encountered in service. It is shown that under all conditions, whether during faster oxidation in the early stages, slow growth just prior to the transition to a new growth regime, or in the faster growth that happens after this transition, the surface of the metal below the scale is loaded with oxygen up to around 33 at%. Approaching transition, in conditions of slow growth and slow oxygen supply, an additional metastable suboxide is apparent with a thickness of tens of nm. By studying changes in both chemical composition and dielectric function of the material at the oxide scale – metal interface with nanometre resolution, quantitative mapping could be achieved, clearly showing that this is a suboxide composition of ZrO and a Zr oxidation state close to +2. - Highlights: • Metal-oxide interface evolution studied by few-nm resolution EELS mapping. • Low loss EELS is very effective for mapping phase evolution. • ZrO suboxide phase characterised using EELS, which fits theoretical predictions. • ZrO formation found to correlate to local growth rate of oxide scale.

  11. A new plastic correction for the stress intensity factor of an under-clad defect in a PWR vessel subjected to a pressurised thermal shock

    International Nuclear Information System (INIS)

    Marie, S.; Nedelec, M.

    2007-01-01

    For the assessment of an under-clad defect in a vessel subjected to a cold pressurised thermal shock, plasticity is considered through the amplification β of the elastic stress intensity factor K I in the ferritic part of the vessel. An important effort has been made recently by CEA to improve the analytical tools in the frame of R and D activities funded by IRSN. The current solution in the French RSE-M code has been developed from fitted F.E. calculation results. A more physical solution is proposed in this paper. This takes into account two phenomena: the amplification of the elastic K I due to plasticity in the cladding and a plastic zone size correction in the ferritic part. The first correction has been established by representing the cladding plasticity by an imposed displacement on the crack faces at the interface between the cladding and the ferritic vessel. The corresponding elastic stress intensity factor is determined from the elastic plane strain asymptotic solution for the opening displacement. Plasticity in the ferritic steel is considered through a classical plastic zone size correction. The application of the solution to axisymmetric defects is first checked. The case of semi-elliptical defects is also investigated. For the correction determined at the interface between the cladding and the ferritic vessel, an amplification of the correction proposed for the deepest point is determined from a fitting of the 3D F.E. calculation results. It is also shown that the proposition of RSE-M, which consists in applying the same β correction at the deepest point and the interface point is not suitable. The applicability to a thermal shock, eventually combined with an internal pressure has been verified. For the deepest point, the proposed correction leads to similar results to the RSE-M method, but presents an extended domain of validity (no limits on the crack length are imposed)

  12. Equipment Operational Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Greenwalt, B; Henderer, B; Hibbard, W; Mercer, M

    2009-06-11

    The Iraq Department of Border Enforcement is rich in personnel, but poor in equipment. An effective border control system must include detection, discrimination, decision, tracking and interdiction, capture, identification, and disposition. An equipment solution that addresses only a part of this will not succeed, likewise equipment by itself is not the answer without considering the personnel and how they would employ the equipment. The solution should take advantage of the existing in-place system and address all of the critical functions. The solutions are envisioned as being implemented in a phased manner, where Solution 1 is followed by Solution 2 and eventually by Solution 3. This allows adequate time for training and gaining operational experience for successively more complex equipment. Detailed descriptions of the components follow the solution descriptions. Solution 1 - This solution is based on changes to CONOPs, and does not have a technology component. It consists of observers at the forts and annexes, forward patrols along the swamp edge, in depth patrols approximately 10 kilometers inland from the swamp, and checkpoints on major roads. Solution 2 - This solution adds a ground sensor array to the Solution 1 system. Solution 3 - This solution is based around installing a radar/video camera system on each fort. It employs the CONOPS from Solution 1, but uses minimal ground sensors deployed only in areas with poor radar/video camera coverage (such as canals and streams shielded by vegetation), or by roads covered by radar but outside the range of the radar associated cameras. This document provides broad operational requirements for major equipment components along with sufficient operational details to allow the technical community to identify potential hardware candidates. Continuing analysis will develop quantities required and more detailed tactics, techniques, and procedures.

  13. Charging equipment. Ladegeraet

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, E

    1981-09-17

    The invention refers to a charging equipment, particularly on board charging equipment for charging traction batteries of an electric vehicle from the AC mains supply, consisting of a DC converter, which contains a controlled power transistor, a switching off unloading circuit and a power transmitter, where the secondary winding is connected in series with a rectifier diode, and a smoothing capacitor is connected in parallel with this series circuit. A converter module is provided, which consists of two DC voltage converters, whose power transistors are controlled by a control circuit in opposition with a phase displacement of 180/sup 0/.

  14. Communiquer ! les bibliothécaires, les décideurs et les journalistes

    CERN Document Server

    2010-01-01

    L'enjeu de la communication en direction des élus, des décideurs, mais aussi des journalistes, est devenu vital pour les bibliothèques : il s'agit de donner à voir aux tutelles leurs activités, de rendre intelligible leur stratégie de développement, de construire une image institutionnelle forte. De quels moyens dispose la bibliothèque pour faire la preuve du bien-fondé de son existence ? Comment communiquer en direction d'un élu municipal ou régional, d'un responsable politique de la bibliothèque ? Que peut apporter une bonne collaboration avec des journalistes, avec les partenaires naturels ou hiérarchiques au sein de l'université ou de la collectivité territoriale ? Comment utiliser à bon escient les méthodes du lobbying et du marketing, ou l'emploi des réseaux sociaux ? Voilà quelques-unes des questions abordées ici.

  15. The Conflicting Forces Driving Future Avionics Acquisition (Les Arguments Contradictoires pour les Futurs Achats d’Equipements d’Avionique)

    Science.gov (United States)

    1991-09-01

    Sep 1983 "Reliability Parameter of Additive Plated Through Hoics," William E. Greiner , Kollmorgen Corporation, 1rAnnual "Guidelines for Surface Mounting...Militare Etat-Major delIs Force Adienne Ufficio del Delegato Nazionaic all*AGARD Quartier Reine Elisabeth Aeroporto Pratica di Mare Rue d’Evere, 1140

  16. Experimental equipment, ch. 6

    International Nuclear Information System (INIS)

    Boomstra, F.; Hoogenboom, A.M.; Prins, C.M.; Strasters, B.A.; Vermeer, A.; Wit, P. de; Zwol, N.A. van.

    1977-01-01

    The experimental equipment in use at Utrecht university is discussed. Attention is paid to the tandem Van de Graaff accelerator and the 4MV and 1MV accelerators. The detection systems for gamma-ray spectroscopy are reviewed with emphasis on the compton-suppression spectrometer. The data-handling system used for experiments with the tandem is also briefly discussed

  17. Equipment gift to Monaco

    International Nuclear Information System (INIS)

    1970-01-01

    Research work at the Agency's Laboratory of Marine Radioactivity in Monaco, including that concerned with pollution of the sea, has been made more effective by its latest acquisition of equipment. This is a spectrophotometer donated by the Federal Republic of Germany. (author)

  18. Lifetime of Mechanical Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Leland, K.

    1999-07-01

    The gas plant at Kaarstoe was built as part of the Statpipe gas transport system and went on stream in 1985. In 1993 another line was routed from the Sleipner field to carry condensate, and the plant was extended accordingly. Today heavy additional supply- and export lines are under construction, and the plant is extended more than ever. The main role of the factory is to separate the raw gas into commercial products and to pump or ship it to the markets. The site covers a large number of well-known mechanical equipment. This presentation deals with piping, mechanical and structural disciplines. The lifetime of mechanical equipment is often difficult to predict as it depends on many factors, and the subject is complex. Mechanical equipment has been kept in-house, which provides detailed knowledge of the stages from a new to a 14 years old plant. The production regularity has always been very high, as required. The standard of the equipment is well kept, support systems are efficient, and human improvisation is extremely valuable.

  19. Safeguards techniques and equipment

    International Nuclear Information System (INIS)

    1997-01-01

    The current booklet is intended to give a full and balanced description of the techniques and equipment used for both nuclear material accountancy and containment and surveillance measures, and for the new safeguards measure of environmental sampling. As new verification measures continue to be developed, the material in the booklet will be periodically reviewed and updated versions issued. (author)

  20. Equipping tomorrow's fire manager

    Science.gov (United States)

    Christopher A. Dicus

    2008-01-01

    Fire managers are challenged with an ever-increasing array of both responsibilities and critics. As in the past, fire managers must master the elements of fire behavior and ecology using the latest technologies. In addition, today’s managers must be equipped with the skills necessary to understand and liaise with a burgeoning group of vocal stakeholders while also...

  1. Electrical equipment design library

    International Nuclear Information System (INIS)

    1994-01-01

    This book guides the design supervision, construction order for electrical equipment. The contents of this library are let's use electricity like this, leading-in-pole and casual power, electric pole install below 300KVA, electric pole install below 301∼1000KVA, electric pole install exceed 1000KVA, rooftop install exceed 1000KVA, CUBICLE type, 154KV services. It adds an appendix.

  2. Orphee reactor experimental equipment

    International Nuclear Information System (INIS)

    1987-01-01

    Experimental equipment around the ORPHEE reactor is presented. The neutron source; and the spectrometers and sample environment (inelastic and quasi-elastic scattering, elastic scattering, spread scattering, small angle scattering) are described. An experiment proposal and reports guide is supplied [fr

  3. Seismic qualification of equipment

    International Nuclear Information System (INIS)

    Heidebrecht, A.C.; Tso, W.K.

    1983-03-01

    This report describes the results of an investigation into the seismic qualification of equipment located in CANDU nuclear power plants. It is particularly concerned with the evaluation of current seismic qualification requirements, the development of a suitable methodology for the seismic qualification of safety systems, and the evaluation of seismic qualification analysis and testing procedures

  4. Underground coal equipment

    Energy Technology Data Exchange (ETDEWEB)

    Chadwick, J.

    2002-12-01

    This paper reports on increasing automation and enhanced productivity on longwalls, new development cutting and bolting technologies and haulage systems. Amongst equipment discussed is DBT's Electra series EL3000 shearer, the Dosco LH1400 roadheader with onboard bolters, and Joy 12 CM30 continuous miners. 4 photos.

  5. Sustainable energy management in municipal buildings and equipment; Gestion durable de l'energie dans les batiments et les equipements municipaux

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The municipalities and local authorities in the CEEC countries have been given back ownership of the majority of public buildings formerly owned by the state: schools, sports and cultural buildings and administrative buildings. Even the management of public lighting and the collection and treatment of sewage are in most cases the responsibility of municipalities. Municipalities pay the energy bills of all these buildings and they find it difficult because of the difference between their income and the energy prices that they are forced to pay, the latter being already set, or soon to be set, by the price on the European market. The experience of towns in the EU has shown that it was mainly under the impact of a similar situation (the oil crisis during the years 1970) that local energy management policies were put in place. These included energy audits, monitoring of consumption, setting up local energy management teams, action plans, investment programmes, etc. The know-how acquired during that phase of energy management of the municipal stock has very often served as a basis for the development of sustainable local energy policies encompassing all fields of urban activity. This void in our knowledge and basic experience is often a complete obstacle to the practical implementation of sustainable local energy policies, integrated within a local Agenda 21, despite declarations of goodwill and sometimes praiseworthy political intentions. All these questions are approached principally with the objective of stimulating a movement in the CEEC, but building on the experience of municipalities of the EU. One should not forget however that in a large number of them, no process approaching the scale of the challenge to be faced has yet been set in train. Both CEEC and EU experiences are presented. (author)

  6. Sustainable energy management in municipal buildings and equipment; Gestion durable de l'energie dans les batiments et les equipements municipaux

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The municipalities and local authorities in the CEEC countries have been given back ownership of the majority of public buildings formerly owned by the state: schools, sports and cultural buildings and administrative buildings. Even the management of public lighting and the collection and treatment of sewage are in most cases the responsibility of municipalities. Municipalities pay the energy bills of all these buildings and they find it difficult because of the difference between their income and the energy prices that they are forced to pay, the latter being already set, or soon to be set, by the price on the European market. The experience of towns in the EU has shown that it was mainly under the impact of a similar situation (the oil crisis during the years 1970) that local energy management policies were put in place. These included energy audits, monitoring of consumption, setting up local energy management teams, action plans, investment programmes, etc. The know-how acquired during that phase of energy management of the municipal stock has very often served as a basis for the development of sustainable local energy policies encompassing all fields of urban activity. This void in our knowledge and basic experience is often a complete obstacle to the practical implementation of sustainable local energy policies, integrated within a local Agenda 21, despite declarations of goodwill and sometimes praiseworthy political intentions. All these questions are approached principally with the objective of stimulating a movement in the CEEC, but building on the experience of municipalities of the EU. One should not forget however that in a large number of them, no process approaching the scale of the challenge to be faced has yet been set in train. Both CEEC and EU experiences are presented. (author)

  7. Le Pétrole et les dispersants dans les mers baignant le littoral canadien: évaluation des recherches et recommandations

    National Research Council Canada - National Science Library

    Sprague, John B; Vandermeulen, J. H; Wells, P. G; Birchard, E. C

    1982-01-01

    ...; les methodes d'analyse; les effets du petrole, des dispersants et du petrole disperse chimiquement sur le phytoplancton, les macrophytes, le zooplancton, les poissons, les organismes et animaux benthiques et intertidaux, les oiseaux, les mammiferes marins, les communautes et les ecosystemes. Il comporte certaines recommandations en vue de recherches futures indispensables et donne des conseils sur la facon de minimiser les effets de deversements de petrole dans le milieu marin canadien.

  8. Les non-usages des TIC

    OpenAIRE

    Abid-Zarrouk, Sandoss Ben; Alava, Séraphin; Andrieu, Bernard; Audran, Jacques; Avanzini, Guy; Azzimani, Toufik; Béziat, Jacques; Bouamri, Abderrahmane; Boujelbène, Younes; Bréant, Françoise; Chauvel, Séverine; Daguet, Hervé; Daniel, Marie-France; Dessus, Philippe; Dupré, Damien

    2012-01-01

    Les ENT (Environnements Numériques de Travail), les plates formes d'EAD (Enseignement A Distance) et les logiciels éducatifs sont généralement étudiés dans la perspective de rendre compte des transformations des situations d'enseignement-apprentissage dans lequelles ils sont utilisés. Les recherches occultent ainsi, de façon non intentionnelle, tout ce qui reste dans l'ombre de l'introduction désormais massive des TIC (Technologies de l'Information et de la Communication), et qui explique pro...

  9. Vitaminothérapie chez les volailles

    OpenAIRE

    Duchadeau, Cécile

    2001-01-01

    La distribution de vitamines dans les élevages aviaires est de plus en plus fréquente, voire systématique, alors qu'elle n'est pas toujours nécessaire ni sans risque ; l'utilisation des vitamines devrait donc être raisonnée. L'étude bibliographique de la structure et des modes d'action de chaque vitamine permet de définir les principales circonstances d'apparition des carences vitaminiques, ainsi que les symptômes susceptibles de se développer. Les carences en vitamines hydrosolubles (C, B1, ...

  10. Les AOC dans la mondialisation

    Directory of Open Access Journals (Sweden)

    Jean-Claude Hinnewinkel

    2004-12-01

    Full Text Available Fruit du conflit plusieurs fois séculaire entre les producteurs et le négoce, le terroir vitivinicole est né de phénomènes de « distinction » qui en Bordelais donnent les « crus ». Ces terroirs de production identifiés, il fallut les faire durer, face à conjoncture, face au négoce. Les réussites les plus nettes sont le résultat d’un projet collectif dont l’AOC à la française est l’une des plus spectaculaires. Renforcer le terroir, compris comme un espace de production géré par les producteurs, devient alors une des conditions essentielles de la durabilité du système. L’avenir des AOC réside sans doute dans une meilleure gestion du conflit négoce/production par l’interprofession mais aussi (surtout ! dans un renforcement de la gestion de la production au sein de l’aire de production qu’est le terroir. L’avenir du terroir relève de la gouvernance de cette aire de production avec trois partenaires : la puissance publique (INAO, l’interprofession et le syndicat des producteurs. Se pose dès lors la question du partage des compétences et la durabilité des AOC paraît liée en grande partie à une définition claire du rôle et donc du statut des syndicats de producteurs, à une véritable gouvernance locale, seule capable de donner du sens à l’ancrage géographique des vins dits de « terroir ». Mais alors ne faut-il pas impliquer un troisième partenaire, la société locale toute entière à travers ses représentations démocratique et associative ?Resulting from century-long conflicts between producers and merchants, vineyards have developped out of "distinction" phenomenons which in the Bordeaux region gave birth to "crus" (vintages. Such identified terroirs had to be defended: the French collective AOC (Denomination of Origin project is one of the most spectacular success. The terroir, as production territory organized by producers, is one of the essential conditions for sustainability

  11. Aldicarbe et crimidine dans les eaux et les sédiments aux alentours ...

    African Journals Online (AJOL)

    homme et de l'environnement, sont utilisées contre les pestes et autres nuisibles. Cependant, la plupart des études menées se sont focalisées sur les organochlorés. La fréquence de détection et les concentrations des pesticides aldicarbe et ...

  12. Les tribunaux, et non pas les liens de parenté, offrent de meilleures ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    29 janv. 2018 ... Les recherches menées au Bangladesh et en Inde ont révélé que les femmes et les personnes provenant de populations marginalisées ont besoin de tribunaux qui fonctionnent bien pour exploiter leur plein potentiel.

  13. De meilleures données probantes sur les dons privés dans les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... mesurer l'ampleur, les sources et les réussites de la philanthropie ainsi que les facteurs qui la favorisent. ... et futures grâce à son vaste réseau de partenaires individuels et institutionnels. ... Framework Agreement between IISD and IDRC.

  14. Les écoulements fluviaux

    Directory of Open Access Journals (Sweden)

    Huguette VIVIAN

    1992-06-01

    Full Text Available Cette carte présente une image des principaux fleuves et de leurs affluents, ainsi que la situation des principales stations de mesure et des lames d’eau écoulées. Cette mesure des écoulements fluviaux, effectuée d’abord à l’aide des débits mesurés dans 400 stations hydrométriques choisies parmi les 800 du réseau national, a été éventuellement enrichie par des informations complémentaires.

  15. Protection contre les radiations recommandations

    CERN Document Server

    Claude, A; Kipfer, P; Bacq, Z

    Considérations générales ; mesures de sécurité vis-à-vis des sources de rayonnement externes ; mesures de sécurité vis-à-vis des radioisotopes ; étude spéciale de la protection dans quelques cas particuliers ; mesures de sécurité vis-à-vis des neutrons ; mesures de protection pour les appareils de supervoltage ; appareils physiques de mesure et de contrôle pour la protection.

  16. Visual communication and terminal equipment

    International Nuclear Information System (INIS)

    Kang, Cheol Hui

    1988-06-01

    This book is divided two parts about visual communication and terminal equipment. The first part introduces visual communication, which deals with foundation of visual communication, technique of visual communication, equipment of visual communication, a facsimile and pictorial image system. The second part contains terminal equipment such as telephone, terminal equipment for data transmission on constitution and constituent of terminal equipment for data transmission, input device and output device, terminal device and up-to-date terminal device.

  17. Visual communication and terminal equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Cheol Hui

    1988-06-15

    This book is divided two parts about visual communication and terminal equipment. The first part introduces visual communication, which deals with foundation of visual communication, technique of visual communication, equipment of visual communication, a facsimile and pictorial image system. The second part contains terminal equipment such as telephone, terminal equipment for data transmission on constitution and constituent of terminal equipment for data transmission, input device and output device, terminal device and up-to-date terminal device.

  18. Adaptation dans les zones cruciales au regard des changements ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ) vise à accroître la résilience des populations pauvres dans trois « zones cruciales » au regard des changements climatiques : les bassins hydrographiques, les deltas et les régions semi-arides.

  19. Equipment cost optimization

    International Nuclear Information System (INIS)

    Ribeiro, E.M.; Farias, M.A.; Dreyer, S.R.B.

    1995-01-01

    Considering the importance of the cost of material and equipment in the overall cost profile of an oil company, which in the case of Petrobras, represents approximately 23% of the total operational cost or 10% of the sales, an organization for the optimization of such costs has been established within Petrobras. Programs are developed aiming at: optimization of life-cycle cost of material and equipment; optimization of industrial processes costs through material development. This paper describes the methodology used in the management of the development programs and presents some examples of concluded and ongoing programs, which are conducted in permanent cooperation with suppliers, technical laboratories and research institutions and have been showing relevant results

  20. X-ray equipment

    International Nuclear Information System (INIS)

    Redmayne, I.G.B.

    1988-01-01

    The patent concerns a warning and protection system for mobile x-ray equipment used for 'on site' radiography, so that workers in the vicinity of such a working unit can be alerted to its presence. The invention is a local repeater warning system which gives a preliminary warning that energisation of the tubehead is imminent, as well as a switch near the tubehead to abort or inhibit energisation. The latter switch allows personnel caught in the vicinity of the tubehead to prevent energisation. The preliminary warning may be flashing lamps or by a klaxon. The control unit for the equipment may include a monitoring circuit to detect failure of the warning light or klaxon. (U.K.)

  1. X-ray equipment

    Energy Technology Data Exchange (ETDEWEB)

    Redmayne, I.G.B.

    1988-01-06

    The patent concerns a warning and protection system for mobile x-ray equipment used for 'on site' radiography, so that workers in the vicinity of such a working unit can be alerted to its presence. The invention is a local repeater warning system which gives a preliminary warning that energisation of the tubehead is imminent, as well as a switch near the tubehead to abort or inhibit energisation. The latter switch allows personnel caught in the vicinity of the tubehead to prevent energisation. The preliminary warning may be flashing lamps or by a klaxon. The control unit for the equipment may include a monitoring circuit to detect failure of the warning light or klaxon. (U.K.).

  2. Tube for irradiation equipment

    International Nuclear Information System (INIS)

    Goehrich, K.; Vogt, H.

    1979-01-01

    This patent describes a tube for irradiation equipment for limiting an emergent beam, with a baseplate, possessing a central aperture, intended for attaching to the equipment, as well as four carrier plates, each of which possesses a limiting edge and a sliding edge located at right angles thereto. The carrier plates are located parallel to the baseplate, the limiting edge of each carrier plate resting against the sliding edge of the adjacent carrier plate and each of the two mutually opposite pairs of carrier plates being displaceable, parallel to the direction of its sliding edges and symmetrically to the center of the transmission aperture, for the purpose of continuously varying the transmission aperture defined by the limiting edges, during which displacement each of the displaced carrier plates carries with it the carrier plate, resting against the limiting edge of the former plate, parallel to the direction of the limiting edge of the latter plate. 8 claims

  3. Comment scolariser les enfants Roms? Les enfants Roms dans les dispositifs mis en place à Bordeaux Métropole.

    OpenAIRE

    Øhlund, Ida

    2016-01-01

    Dans ce mémoire, je m intéresse à la scolarisation des enfants Roms en France. Je présente la place des enfants Roms dans la scolarisation en Europe et en France. Je discute les efforts qu on fait en France pour scolariser ces enfants, et je prends comme exemple les mesures d intégration prises par les autorités de Bordeaux Métropole en expliquant lesles des différents acteurs locaux. Dans la première partie, j essaye de présenter le groupe minoritaire européen appelé « Rom ». J aborde l h...

  4. Equipment for isotope diagnostics

    International Nuclear Information System (INIS)

    Platz, W.

    1976-01-01

    The invention concerns an improvement of equipment for isotope diagnostics allowing to mark special intensity ranges of the recorded measurements by means of different colors. For undisturbed operation it is of advantage to avoid electric circuits between movable and unmovable parts of the color recorder. According to the invention, long gear wheels of glass fiber-reinforced polyamide are used for these connections. (ORU) [de

  5. Soviet equipment flies in

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    End of February 1977 a Soviet Ilyushin-76 heavy freight aircraft landed at Cointrin airport having on board fifty large wire proprtional chambers and associated apparatus, together weighing 10 tons, supplied by the Joint Institute for Nuclear Research, Dubna, USSR. The equipment was for the CERN- Dubna-Munich-Saclay experiment NA4 on deep inelastic muon scattering being set up in the North Area of SPS. See Weekly Bulletin 11/78.

  6. Labelling of equipment dispensers.

    Science.gov (United States)

    Gray, D C

    1993-01-01

    A new labelling system for use on medical equipment dispensers is tested. This system uses one of the objects stored in each unit of the dispenser as the 'label', by attaching it to the front of the dispenser with tape. The new system was compared to conventional written labelling by timing subjects asked to select items from two dispensers. The new system was 27% quicker than the conventional system. Images Fig. 1 PMID:8110335

  7. Equipment Obsolescence Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.

    2014-07-01

    Nuclear Power Plant (NPP) Operators are challenged with securing reliable supply channels for safety related equipment due to equipment obsolescence. Many Original Equipment Manufacturers (OEMs) have terminated production of spare parts and product life-cycle support. The average component life cycles are much shorter than the NPP design life, which means that replacement components and parts for the original NPP systems are not available for the complete design life of the NPPs. The lack or scarcity of replacement parts adversely affects plant reliability and ultimately the profitability of the affected NPPs. This problem is further compounded when NPPs pursue license renewal and approval for plant-life extension. A reliable and predictable supply of replacement co components is necessary for NPPs to remain economically competitive and meet regulatory requirements and guidelines. Electrical and I and C components, in particular, have short product life cycles and obsolescence issues must be managed pro actively and not reactively in order to mitigate the risk to the NPP to ensure reliable and economic NPP operation. (Author)

  8. Personal protective equipment

    International Nuclear Information System (INIS)

    2004-01-01

    This Practical Radiation Technical Manual is one of a series that has been designed to provide guidance on radiological protection for employers, radiation protection officers, managers and other technically competent persons who have responsibility for ensuring the safety of employees working with ionizing radiation. The Manual may be used with the appropriate IAEA Practical Radiation Safety Manuals to provide training, instruction and information for all employees engaged in work with ionizing radiation. Personal protective equipment (PPE) includes clothing or other special equipment that is issued to individual workers to provide protection against actual or potential exposure to ionizing radiations. It is used to protect each worker against the prevailing risk of external or internal exposure in circumstances in which it is not reasonably practicable to provide complete protection by means of engineering controls or administrative methods. Adequate personal protection depends on PPE being correctly selected, fitted and maintained. Appropriate training for the users and arrangements to monitor usage are also necessary to ensure that PPE provides the intended degree of protection effectively. This Manual explains the principal types of PPE, including protective clothing and respiratory protective equipment (RPE). Examples of working procedures are also described to indicate how PPE should be used within a safe system of work. The Manual will be of most benefit if it forms part of a more comprehensive training programme or is supplemented by the advice of a qualified expert in radiation protection. Some of the RPE described in this Manual should be used under the guidance of a qualified expert

  9. Les supraconducteurs en courant alternatif

    Science.gov (United States)

    Lacaze, A.; Laumond, Y.

    1991-02-01

    Since 1983, when the very first AC wire became available, the comprehension of electromagnetic phenomenas ruling over stability and losses of multifilamentary superconductors in AC use, has much improved. Improvements of manufacturing process has opened up the possibility of industrial scale manufacturing of up to one million, 140 nm in diameter, filaments. The AC loss performances and stability remains at the best level up to date. Les premiers brins supraconducteurs utilisables en courants alternatifs sont apparus en 1983. Depuis, des progrès importants ont été réalisés sur le plan de la compréhension des phénomènes électromagnétiques commandant les pertes et la stabilité dans des brins multifilamentaires à filaments ultrafins. L'amélioration des performances et des procédés de fabrication nous permet aujourd'hui de présenter des brins, fabriqués à l'échelle industrielle, comprenant jusqu'à près d'un million de filaments de 140 nm de diamètre, avec des niveaux de pertes et de stabilité inégalés à ce jour.

  10. Les Fleurs bleues (R. Queneau

    Directory of Open Access Journals (Sweden)

    Séverine Manhaval

    1999-09-01

    Full Text Available Les Fleurs bleues, roman paru en 1965, propose un fascinant voyage dans le temps et dans l'espace géographique des langues, une odyssée au cœur de la problématique babélienne dont il se fait le porte-parole. Queneau joue sur les particularités linguistiques, les idiolectes et les syntaxes dans une perspective transhistorique et cosmopolite, créant un nouvel esperanto romanesque : le « néobabélien ». Toutes les langues s'interpénètrent et se correspondent, enrichissent l'écriture de l'œuvre et dévoilent peu a peu ses prolongements à la fois scientifiques et philosophiques. Queneau élabore ainsi son propre système linguistique et littéraire, dans ce laboratoire de l'arche romanesque, où la langue future est en gestation.Reprenant le flambeau de Noé, l'écrivain entraîne ses lecteurs dans une traversée du déluge qui mêle le rêve et la réalité, l'humour et la nostalgie – celle de la langue unique, la virtuosité du style et la rigueur de la composition. Le roman démantèle les frontières historiques et géographiques, faisant ainsi de Noé une nouvelle figure de l'artiste, sauveur et reconstructeur du Verbe, et chantre de l'infinie potentialité du langage. Non sans humour, son esthétique se fonde sur une dialectique de la contrainte et de la liberté, de la destruction et de la reconstruction, soutenue par un style vif et corrosif. Le conteur, le poète et le mathématicien se rejoignent et conjuguent leur sagesse dans ce roman complexe et déroutant, récit à clés d'une expérience linguistique originale et approfondie.The novel Les Fleurs bleues, which was published in 1965, is an invitation to a fascinating journey into the time and space dimensions of languages, an odyssey into the heart of the Babelian problematics which it publicizes. Queneau plays upon linguistic particularities, idiosyncrasies and syntaxes within a historical and cosmopolitan perspective, and creates a new Esperanto for the novel: the

  11. Les parcs des porcelainiers Haviland

    Directory of Open Access Journals (Sweden)

    Colette Chabrely

    2012-04-01

    Full Text Available Les parcs du Reynou et de Mont-Méry en Limousin, anciennes propriétés des porcelainiers Haviland, présentent l’un et l’autre un grand intérêt paysager et botanique. Dans les deux cas, l’attribution de la création est incertaine. Cet article propose pour le Reynou une analyse de documents figurés anciens permettant de préciser la chronologie des travaux du château et du parc. Pour Mont-Méry il s’agit de poser de nouveaux jalons pour une étude plus approfondie des sources et de la composition des jardins afin d’envisager de nouvelles pistes pour leur attribution.The Reynou and Mont-Méry parks near Limoges originally belonged to the city’s porcelain manufacturers, the Havilands. Both parks are of considerable interest in terms of their landscaping and their botany. In both cases, there is some uncertainty as to the identity of their designers. This article offers an analysis of the graphic representations of the Reynou park, clarifying the chronology of the creation of the château and its park. For the Mont-Méry park, the aim is to offer some guidelines for further research in the source material and on the design of the park itself, perhaps allowing for the designer to be identified.

  12. Characterisation of Oxides Formed on the Internal Surface of Steam Generator Tubes in Alloy 690 Corroded in the Primary Environment of Pressurised Water Reactors

    International Nuclear Information System (INIS)

    Carrette, Florence; Leclercq, Stephanie; Legras, Laurent

    2012-09-01

    Since the end of the 1990s, EDF R and D has been studying the phenomenon of corrosion product release from Steam Generator tubes in order to minimize the Source Term of the contamination and radiation exposure during operation and maintenance of Pressurised Water Reactors. With the BOREAL loop, release tests in primary water at 325 deg. C were performed on various Steam Generator tubes made of alloy 690. The experimental conditions of these tests (chemistry, temperature and hydraulics) were the same for all the tests but the results showed various behaviours towards release. For some tubes, the release was weak whereas for others, it was higher; the release rate of the tubes decreased more or less quickly with time. In order to explain these results, the internal surface of the tubes was characterised before and after the tests. Before the tests, various parameters were studied; the main parameters were the roughness, the impurities, the grain size and the cold work. The results demonstrated that it was not easy to quantify the influence of each parameter on release and to differentiate the tubes. A new parameter was proposed to characterise the internal extreme surface of SG tubes: the surface nano-hardness by nano-indentation measurements. The tubes were also observed and analysed by SEM, (X)TEM. Data obtained by (X)TEM revealed differences of the surface state (layer of perturbed microstructure, density of dislocations, grain size, impurities, initial oxide,...). After the tests, the oxides formed on the internal surface and the underlying material of the samples were characterised by SEM, (X)TEM and SIMS. The examinations showed various types of oxides. For some tubes, a duplex oxide scale was identified, for the others, only one oxide scale was observed. For equivalent durations of corrosion, the thickness of the enriched - chromium oxide layer can vary from 5 nm to 100 nm and the chemical composition can be different. The examinations of the underlying

  13. International Benchmark on Pressurised Water Reactor Sub-channel and Bundle Tests. Volume II: Benchmark Results of Phase I: Void Distribution

    International Nuclear Information System (INIS)

    Rubin, Adam; Avramova, Maria; Velazquez-Lozada, Alexander

    2016-03-01

    This report summarised the first phase of the Nuclear Energy Agency (NEA) and the US Nuclear Regulatory Commission Benchmark based on NUPEC PWR Sub-channel and Bundle Tests (PSBT), which was intended to provide data for the verification of void distribution models in participants' codes. This phase was composed of four exercises; Exercise 1: steady-state single sub-channel benchmark, Exercise 2: steady-state rod bundle benchmark, Exercise 3: transient rod bundle benchmark and Exercise 4: a pressure drop benchmark. The experimental data provided to the participants of this benchmark is from a series of void measurement tests using full-size mock-up tests for both Boiling Water Reactors (BWRs) and Pressurised Water Reactors (PWRs). These tests were performed from 1987 to 1995 by the Nuclear Power Engineering Corporation (NUPEC) in Japan and made available by the Japan Nuclear Energy Safety Organisation (JNES) for the purposes of this benchmark, which was organised by Pennsylvania State University. Twenty-one institutions from nine countries participated in this benchmark. Seventeen different computer codes were used in Exercises 1, 2, 3 and 4. Among the computer codes were porous media, sub-channel, systems thermal-hydraulic code and Computational Fluid Dynamics (CFD) codes. It was observed that the codes tended to overpredict the thermal equilibrium quality at lower elevations and under predict it at higher elevations. There was also a tendency to overpredict void fraction at lower elevations and underpredict it at high elevations for the bundle test cases. The overprediction of void fraction at low elevations is likely caused by the x-ray densitometer measurement method used. Under sub-cooled boiling conditions, the voids accumulate at heated surfaces (and are therefore not seen in the centre of the sub-channel, where the measurements are being taken), so the experimentally-determined void fractions will be lower than the actual void fraction. Some of the best

  14. Inquiétudes pour les emplois

    CERN Multimedia

    2002-01-01

    "Le dépassement budgétaire du LHC oblige la direction a réaliser des économies. Selon les syndicats francais et suisses, ces économies entraineraient des suppressions d'emplois, notamment chez les enterprises sous-traitantes du Cern"

  15. Les faits,une arme contre

    International Development Research Centre (IDRC) Digital Library (Canada)

    un_focus_pauvreté. Aux Philippines, les progrès reposent sur une information rigoureuse. Aux Philippines, le système de suivi communautaire de la pauvreté, d'abord projet pilote, s'est étendu, en 14 ans, à l'échelle nationale, appuyé par tous les ordres ...

  16. les cahiers du cread: About this journal

    African Journals Online (AJOL)

    les cahiers du cread: About this journal. Journal Home > les cahiers du cread: About this journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. People. » Contact. Policies.

  17. Laboratory developments of a diagonal turbine for medium head small hydro power plants (25 - 100 m). Final report; Turbines diagonales. Programme de developpement d'une turbine hydraulique diagonale destinee a equiper les petites centrales a moyenne chute (25 a 100 m) - Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Choulot, A.; Denis, V.

    2009-11-15

    The first result of the project was the mechanical design of the diagonal turbine and, in particular, the runner and the adjustable blade driving system. The system was designed for the 12-blade runner and is thus suitable for any lower number of blades. With a reference runner diameter of 329.4 mm, the laboratory test model corresponds approximately to the smallest size for a prototype of Diagonal turbine. The mechanical design is thus available for any larger prototype. The complementary use of numerical simulations and laboratory tests provided a deep understanding of the hydraulic behaviour of the Diagonal turbine. Based on this extensive knowledge, the mechanical set-up and hydraulic design was significantly improved. The developments showed that the effect of the gap between the discharge ring and the blades on both the efficiency and cavitation behaviour was significantly enhanced compared to Kaplan turbines. The optimization of this gap together with improvements of the geometry enabled to raise the maximum efficiency from 86.5% with the initial configuration to more than 92%, and to significantly reduce the development of cavitation. The first developed configuration was the 8-blade runner. Various guide vane configurations were tested. The analysis of numerical and experimental results led to the development of an optimal configuration with a maximum efficiency of 92% and a satisfactory cavitation behaviour suitable for heads up to 50 m. The development of the 12-blade runner fully profited from the knowledge gained with the 8 blade configuration. The improved blade design process significantly fastened the development phase necessary to obtain high performances. The maximum efficiency is above 92% and the cavitation behaviour allows 80 m heads. Based on these good results, a first demonstration project was launched to equip the Montsalvens site (Switzerland). The objective is to install a turbine at the foot of the Montsalvens dam of the existing hydro

  18. : tous les projets | Page 469 | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Du fait de leur situation de sous-développement, les pays africains reçoivent des tonnes d'équipements électroniques et informatiques d'occasion des pays plus avancés. Date de début : 6 août 2007. End Date: 7 mars 2011. Sujet: COMPUTERS, ELECTRONIC EQUIPMENT, WASTE RECYCLING, WASTE DISPOSAL, ...

  19. Scientific Equipment Division - Overview

    International Nuclear Information System (INIS)

    Halik, J.

    2001-01-01

    Full text: The Scientific Equipment Division consists of the Design Group and the Mechanical Workshop. The activity of the Division includes the following: - designing of devices and equipment for experiments in physics, their mechanical construction and assembly. In particular, there are vacuum chambers and installations for HV and UHV; - maintenance and upgrading of the existing installations and equipment in our Institute; - participation of our engineers and technicians in design works, equipment assembly and maintenance for experiments in foreign laboratories. The Design Group is equipped with PC-computers and AutoCAD graphic software (release 2000 and Mechanical Desktop 4.0) and a AO plotter, what allows us to make drawings and 2- and 3-dimensional mechanical documentation to the world standards. The Mechanical Workshop can offer a wide range of machining and treatment methods with satisfactory tolerances and surface quality. It offers the following possibilities: - turning - cylindrical elements of a length up to 2000 mm and a diameter up to 400 mm, and also disc-type elements of a diameter up to 600 mm and a length not exceeding 300 mm; - milling - elements of length up to 1000 mm and gear wheels of diameter up to 300 mm; - grinding - flat surfaces of dimensions up to 300 mm x 1000 mm and cylindrical elements of a diameter up to 200 mm and a length up to 800 mm; - drilling - holes of a diameter up to 50 mm; - welding - electrical and gas welding, including TIG vacuum-tight welding; - soft and hard soldering; - mechanical works including precision engineering; - plastics treatment - machining and polishing using diamond milling, modelling, lamination of various shapes and materials, including plexiglas, scintillators and light-guides; - painting - paint spraying with possibility of using furnace-fred drier of internal dimensions of 800 mm x 800 mm x 800 mm. Our workshop posses CNC milling machine which can be used for machining of work-pieces up to 500 kg

  20. N° 341-Diagnostic et prise en charge de la torsion annexielle chez les filles, les adolescentes et les femmes adultes.

    Science.gov (United States)

    Kives, Sari; Gascon, Suzy; Dubuc, Élise; Van Eyk, Nancy

    2017-02-01

    Passer en revue les connaissances scientifiques actuelles et formuler des recommandations relatives au diagnostic et à la prise en charge de la torsion annexielle chez les filles, les adolescentes et les femmes adultes. L'étude porte sur les facteurs de risque, la précision diagnostique, les options de prise en charge et les issues de la torsion annexielle. RéSULTATS: Nous avons examiné les études publiées en faisant des recherches dans MEDLINE, Embase, CINAHL et la Bibliothèque Cochrane à l'aide d'une terminologie contrôlée et de mots-clés appropriés (« adnexal torsion », « ovarian torsion »). Nous avons limité les résultats aux revues systématiques, aux essais contrôlés aléatoires, aux essais cliniques contrôlés et aux études d'observation. Nous avons refait les recherches de façon régulière et intégré de nouvelles données à la directive jusqu'en décembre 2014. Nous avons également étudié la littérature grise (non publiée) trouvée sur les sites Web d'organismes d'évaluation des technologies de la santé et d'autres organismes connexes, dans des collections de directives cliniques et dans des registres d'essais cliniques, et obtenue auprès d'associations nationales et internationales de médecins spécialistes. Les résultats ont été examinés et évalués par le comité CANPAGO de la Société des obstétriciens et gynécologues du Canada (SOGC), sous la direction des auteures principales. Les recommandations ont été classées selon les critères établis par le Groupe d'étude canadien sur les soins de santé préventifs. AVANTAGES, DéSAVANTAGES ET COûTS: L'application de la directive devrait aider les praticiens à adopter une approche de diagnostic et de prise en charge optimale en matière de torsion annexielle, à réduire au minimum les effets néfastes et à améliorer l'issue qui attend les patientes. La présente directive a été évaluée et approuvée par le Comité de pratique - gynécologie de la SOGC

  1. Pressurised-water reactor plant

    International Nuclear Information System (INIS)

    Bergloeff, D.

    1976-01-01

    This additional patent improves the plant described in main patent 2244562 where the primary coolant pump is built into the housing of the steam raising unit, by overcoming certain difficulties in the transition from the specially extensive tube floor of the steam raising unit to the narrow crossection of the pump penetration. This is achieved by the formation of an unsymmetrical inlet funnel between the tube floor of the steam raising unit and the suction side of the pump. A side wall of the funnel forms the separating wall between the inlet and the outlet chamber below the tube floor of the steam raising unit. The crossection of the inlet funnel is reduced towards the pump by 2/3 to 1/3. Even laminar flow conditions are obtained at all flow velocities. Erosion, which disturbs flow and causes cavitation, no longer occurs. (ORU) [de

  2. Mining face equipment

    Energy Technology Data Exchange (ETDEWEB)

    G, Litvinskiy G; Babyuk, G V; Yakovenko, V A

    1981-01-07

    Mining face equipment includes drilling advance wells, drilling using explosives on the contour bore holes, loading and transporting the crushed mass, drilling reinforcement shafts, injecting reinforcement compounds and moving the timber. Camouflet explosives are used to form relaxed rock stress beyond the mining area to decrease costs of reinforcing the mining area by using nonstressed rock in the advance well as support. The strengthening solution is injected through advanced cementing wells before drilling the contour bores as well as through radial cementing wells beyond the timbers following loading and transport of the mining debris. The advance well is 50-80 m.

  3. Coal ash monitoring equipment

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, C G; Wormald, M R

    1978-10-02

    The monitoring equipment is used to determine the remainder from combustion (ash slack) of coal in wagons designed for power stations. Next to the rails, a neutron source (252 Cf, 241 Am/Be) is situated, which irradiates the coal with neutrons at a known dose, which produces the reaction 27 Al (n ..gamma..) Al 28. The aluminium content is a measure of the remainder. The 1.78 MeV energy is measured downstream of the rail with a detector. The neutron source can only act in the working position of a loaded wagon.

  4. Management of Transportation Equipment.

    Science.gov (United States)

    1982-11-01

    Record% % %. "jP -M -. M LIh TRANSPORTATION MAENTKENAI4CE SHOP WORKLOAD CONTROL WORK CENTER SADR A-OR .a’* tLR 4.,R53 8114LM 0 o 251 50 75 100 125 ISO ...PDBP 06 7 4892 TRACTOR, WHEEL, INDUST, 14001-20000 PDBP 06 7 4893 TRACTOR, WHEEL, INDUST, 20001-27000 PDBP 06 7 4894 TRACTOR, WHEEL, INDUST, 27001 PDBP...27K TRACTOR, WHEEL, INDUST, 27001 PDBP & UP P-i LINE ITEM 07 LIGHTING AND POWER GENERATION EQUIPMENT 5110 T FLOODLIGHT ELEC FLOODLIGHT, ELEC, TRUCK

  5. Entrer dans les squats ouverts

    OpenAIRE

    2015-01-01

    Au cœur des métropoles françaises émergent ici et là des squats, lieux d’habitation et de création affranchis, tournés vers la ville et ses habitants. Vivre en squat constitue un mode de vie, un choix subversif, une forme de résistance au système, autant qu’un recours face aux difficultés sociales. Ce livre nous plonge dans les squats « ouverts » et saisit, par la sociologie, le quotidien de ces populations mouvantes et fortement hétérogènes. Il répond à des questions simples. Qui sont ces sq...

  6. Les dispositifs du Net art

    OpenAIRE

    Fourmentraux, Jean-Paul

    2010-01-01

    La pratique du Net art radicalise la question du potentiel communicationnel d’un média —Internet— qui constitue tout à la fois le support technique, l’outil créatif et le dispositif social de l’œuvre. Les technologies de l’information et de la communication (TIC) placent en effet l’œuvre d’art au cœur d’une négociation socialement distribuée entre l’artiste et le public. L’article est focalisé sur cette construction collective du Net art et sur ses mises en scènes. Il montre le travail artist...

  7. Les lanceurs d’alerte

    OpenAIRE

    Foegle, Jean-Philippe

    2014-01-01

    Le lanceur ou « donneur » d'alerte, ou, en langue anglaise, whistleblower est défini par l'assemblée parlementaire du conseil de l'Europe (Résolution 1729 (2010), §1) comme « toute personne soucieuse qui tire la sonnette d’alarme afin de faire cesser des agissements pouvant représenter un risque pour autrui ». Le présent mémoire vise, en menant une étude comparée France-Etats-Unis du droit encadrant le phénomène du « lancement d'alerte », à cerner les éléments principaux de la notion. Le prem...

  8. Californium-252 Program Equipment Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Chattin, Fred Rhea [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Kenton [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ezold, Julie G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-12-01

    To successfully continue the 252Cf production and meet the needs of the customers, a comprehensive evaluation of the Building 7920 processing equipment was requested to identify equipment critical to the operational continuity of the program.

  9. Cotation de fabrication avec les normes ISO

    CERN Document Server

    Anselmetti, Bernard

    2010-01-01

    La cotation ISO en production impose de nouvelles méthodologies pour élaborer les documents de maîtrise de la qualité géométrique des produits : les dessins de phase, du brut et d'états intermédiaires pour la conformité des pièces et les fiches de production, de réglage, de contrôle et de surveillance pour la conformité des moyens de production. Une méthode de transfert unidirectionnelle simple permet d'établir des dessins de phase en normes ISO et d'optimiser la répartition des tolérances à isocapabilité. Cette cotation est déclinée en cotation d'état intermédiaire, de production et de réglage. Une méthode tridimensionnelle est proposée pour prendre en compte les effets des défauts angulaires. Une maquette montre les fonctionnalités envisageables pour les futurs outils d'aides au tolérancement de fabrication au sein de la CFAO. De nombreux exercices illustrent les différentes démarches. Ce Manuel de tolérancement est principalement destiné aux préparateurs méthodes et aux c...

  10. Regard sur les Lazarets en Terre Canadienne

    Directory of Open Access Journals (Sweden)

    Jean Milot

    2008-01-01

    Full Text Available Puisant dans les nombreuses références qu’offrent les publications médicales canadiennes du milieu du XIXe siècle à nos jours, l’auteur fait découvrir l’existence de lazarets en terre canadienne, décrit l’impact de la maladie sur les conditions vie des lépreux qui y étaient confinés et en souligne les contrecoups tant sur le plan physique et psychologique que social. Il présente un bref aperçu de la maladie, ses symptômes, ses signes ainsi que ses complications oculaires et rappelle les premiers moyens thérapeutiques à base d’huile de chaulmoogra introduits dans la colonie de Tracadie vers 1901. Il illustre son propos en évoquant la vie dans les lazarets de l’île de Sheldrake (1844–1848 et de Tracadie (1848–1965 au Nouveau-Brunswick, puis dans ceux des îles D’Arcy (1891–1924 et de Bentinck (1924–1957 en Colombie-Britannique.

  11. Le zapping, les ethnologues, et leurs Indiens

    Directory of Open Access Journals (Sweden)

    Frédérique Langue

    2005-06-01

    Full Text Available Comme toujours s'agissant des expositions mises en scène au Grand Palais, la présentation est parfaite, impeccable. La mise en valeur des objets venus aussi bien de musées brésiliens qu'européens, et les commentaires qui les accompagnent, orientent le visiteur dans un labyrinthe "exotique" de poteries et d'objets de plume, coupé de temps à autre de documentaires portant sur les rituels amérindiens, chants psalmodiques à l'appui. L'auditoire y semble comme vissé sur place, davantage d'ailleur...

  12. Characterization equipment essential drawing plan

    International Nuclear Information System (INIS)

    WILSON, G.W.

    1999-01-01

    The purpose of this document is to list the Characterization equipment drawings that are classified as Essential Drawings. Essential Drawings: Are those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment (HNF 1997a). The Characterization equipment drawings identified in this report are deemed essential drawings as defined in HNF-PRO-242, Engineering Drawing Requirements (HNF 1997a). These drawings will be prepared, revised, and maintained per HNF-PRO-440, Engineering Document Change Control (HNF 1997b). All other Characterization equipment drawings not identified in this document will be considered Support drawings until the Characterization Equipment Drawing Evaluation Report is completed

  13. Coal mining equipment

    International Nuclear Information System (INIS)

    Stein, R.R.; Martin, T.W.

    1991-01-01

    The word in longwall components is big, and these larger components have price tags to match. The logic behind the greater investment is that it will yield high production rates and good uptime statistics. This is true in most cases. More important than single-shift tonnage records, average shift production continues to climb upwards. This paper reports on the quality, and more significantly, the quantity of service supplied for long-wall equipment, which has reached levels that would have been seen as unachievable when longwall mining was first introduced in the U.S. The school of thought then was that longwall would increase productivity in part by reducing the number of production units and thus reducing the number of personnel employed underground. The expectation of fewer employees turned out to be unrealistic. That was probably one reason that some early attempts to install longwall system looked more like failures than vision of the future

  14. Reactor fuel charging equipment

    International Nuclear Information System (INIS)

    Wade, Elman.

    1977-01-01

    In many types of reactor fuel charging equipment, tongs or a grab, attached to a trolley, housed in a guide duct, can be used for withdrawing from the core a selected spent fuel assembly or to place a new fuel assembly in the core. In these facilities, the trolley may have wheels that roll on rails in the guide duct. This ensures the correct alignment of the grab, the trolley and fuel assembly when this fuel assembly is being moved. By raising or lowering such a fuel assembly, the trolley can be immerged in the coolant bath of the reactor, whereas at other times it can be at a certain level above the upper surface of the coolant bath. The main object of the invention is to create a fuel handling apparatus for a sodium cooled reactor with bearings lubricated by the sodium coolant and in which the contamination of these bearings is prevented [fr

  15. Editorial - Les Defis de la Pratique medicale en Afrique sub ...

    African Journals Online (AJOL)

    La solution à ce dilemme semble se trouver dans un assemblage harmonieux entre les valeurs profondes de l'Afrique, notamment l'esprit de solidarité, et les certitudes de la technologie occidentale. C'est à cette transhumance intellectuelle que les praticiens du continent doivent se livrer pour réduire les disparités de prise ...

  16. Estimation of fracture toughness of Zr 2.5% Nb pressure tube of Pressurised Heavy Water Reactor using cyclic ball indentation technique

    Energy Technology Data Exchange (ETDEWEB)

    Chatterjee, S., E-mail: subrata@barc.gov.in; Panwar, Sanjay; Madhusoodanan, K.; Rama Rao, A.

    2016-08-15

    Highlights: • Measurement of fracture toughness of pressure tube is required for its fitness assessment. • Pressure tube removal from the core consumes large amount of radiation for laboratory test. • A remotely operable In situ Property Measurement System (IProMS) has been designed in house. • Conventional and IProMS tests conducted on pressure tube spool pieces having different mechanical properties. • Correlation has been established between the conventional and IProMS estimated fracture properties. - Abstract: In Pressurised Heavy Water Reactors (PHWRs) fuel bundles are located inside horizontal pressure tubes made up of Zr 2.5 wt% Nb alloy. Pressure tubes undergo degradation during its service life due to high pressure, high temperature and radiation environment. Measurement of mechanical properties of degraded pressure tubes is important for assessing their fitness for further operation. Presently as per safety guidelines imposed by the regulatory body, a few pre-decided pressure tubes are removed from the reactor core at regular intervals during the planned reactor shut down to carry out post irradiation examination (PIE) in a laboratory which consumes lots of man-rem and imposes economic penalties. Hence a system is indeed felt necessary which can carry out experimental trials for measurement of mechanical properties of pressure tubes under in situ conditions. The only way to accomplish this important objective is to develop a system based on an in situ measurement technique. In the field of in situ estimation of properties of materials, cyclic ball indentation is an emerging technique. Presently, commercial systems are available for doing an indentation test either on the outside surface of a component at site or on a test piece in a laboratory. However, these systems cannot be used inside a pressure tube for carrying out ball indentation trials under in situ conditions. Considering the importance of such measurements, an In situ Property

  17. Chapter 12. Space Heating Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, Kevin D.

    1998-01-01

    The performance evaluation of space heating equipment for a geothermal application is generally considered from either of two perspectives: (a) selecting equipment for installation in new construction, or (b) evaluating the performance and retrofit requirements of an existing system. With regard to new construction, the procedure is relatively straightforward. Once the heating requirements are determined, the process need only involve the selection of appropriately sized hot water heating equipment based on the available water temperature. It is important to remember that space heating equipment for geothermal applications is the same equipment used in non-geothermal applications. What makes geothermal applications unique is that the equipment is generally applied at temperatures and flow rates that depart significantly from traditional heating system design. This chapter presents general considerations for the performance of heating equipment at non-standard temperature and flow conditions, retrofit of existing systems, and aspects of domestic hot water heating.

  18. Les plantes médicinales utilisées contre les dermatoses dans la ...

    African Journals Online (AJOL)

    SARAH

    31 oct. 2013 ... Sterculiaceae avec chacune deux espèces. Toutes les autres familles sont représentées par une seule espèce. (Tableau 1). Tableau 1 : Liste des plantes utilisées contre les dermatoses chez les Bainounk de Djibonker, région de Ziguinchor. (Sénégal). Taxon. Famille. Indice de fidélité (FL%). Agave sp.

  19. Les régions et les pays | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Au CRDI, nous finançons la recherche qui permet aux pays en développement de créer le savoir et les solutions nécessaires pour apporter des changements durables. Nos quatre bureaux régionaux collaborent étroitement avec les collectivités qu'ils desservent en Asie, en Afrique, en Amérique latine et dans les Caraïbes, ...

  20. Les catastrophes naturelles présentent une menace pour les ...

    African Journals Online (AJOL)

    toufik

    L'événement sismique a été simulé en utilisant le catalogue algérien des failles actives. Les résultats obtenus montrent que les constructions les plus endommagées sont celles qui reposent sur des sols meubles. Mots-clés : SIG, risque sismique, probabilité de dommages, courbes de fragilité, Hazus. Abstract. Use of a GIS ...

  1. Stratégies fondées sur les citoyens - collaboration avec les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dans le cadre de ce projet, on cherchera à comprendre le climat d'insécurité au sein des collectivités touchées par la violence à Medellín, en Colombie, du point de vue de ceux qui le vivent (les populations vulnérables). Travaillant de concert avec des membres de la collectivité, les chercheurs relèveront les principaux ...

  2. ÉTUDE DE CAS — Équateur (les pesticides) : L'intoxication par les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    10 janv. 2011 ... Le projet s'est déroulé dans trois collectivités (La Libertad, Santa Martha de Cuba et San Pedro de Piartal) où les chercheurs ont entrepris un ambitieux programme combinant les données dela recherche et l'intervention active en vue d'améliorer la vie des familles agricoles. Dans un premier temps, les ...

  3. Quand le crédit à la consommation classe les gens et les choses

    DEFF Research Database (Denmark)

    Ossandón, José

    2012-01-01

    Le développement du crédit à la consommation est l’une des principales manifestations de la financiarisation de l’économie. Les éléments institutionnels et techniques qui lui ont donné forme tels que les dispositifs d’attribution de score aux consommateurs, de détermination des taux ou encore les...

  4. Culture et exercice du pouvoir par les femmes dans les sphères de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Culture et exercice du pouvoir par les femmes dans les sphères de décisions en Afrique de l'Ouest. Cette recherche s'inscrit dans le contexte d'une superposition de deux faits : l'existence d'un arsenal juridique et de dispositions nationales et internationales favorables à une intégration des femmes dans les instances de ...

  5. Autres modèles de prestation de services publics dans les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les écrits sur la prestation de services publics à l'aide de modèles différents ont porté jusqu'à maintenant sur des endroits très précis. Ils ont par ailleurs été circonscrits à des secteurs donnés et ont manqué d'uniformité sur le plan méthodologique. Ce projet vise à analyser les modèles de prestation de services de santé, ...

  6. LES TUMEURS ONCOCYTAIRES DE LA THYROIDE :

    African Journals Online (AJOL)

    19 déc. 2007 ... RESUME. But : Les tumeurs à cellules oncocytaires de la thyroïde (TOT) ont donné jusqu'à ces dernières années de nombreuses controverses, du fait des difficultés à différencier les tumeurs bénignes des tumeurs malignes, entraînant des attitudes thérapeutiques divergentes. L'objectif de cette étude est ...

  7. Decentralisation et politiques budgetaires sportives dans les ...

    African Journals Online (AJOL)

    Celles-ci portent non seulement sur la construction et l'entretien des équipements sportifs locaux mais aussi et surtout sur une assistance matérielle et financière aux structures qui s'occupent de l'organisation et de l'animation des activités sportives dans les communes. Pour les communes non industrialisées, dominées ...

  8. Nouveaux centres de cyberpolitique pour les pays du Sud | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 avr. 2018 ... L'appel ouvert avait pour but de cibler les organismes indépendants voués à la recherche sur les politiques qui s'appuient sur la recherche pour éclairer et influencer les politiques nationales dans les domaines des droits numériques, de la cybersécurité et des politiques d'innovation. Parmi les 59 ...

  9. Les effets socio - economiques de la construction du « boulevard ...

    African Journals Online (AJOL)

    La méthodologie de travail s'est basée sur les recherches documentaires, la collecte de données sur le terrain à travers les observations directes et les entretiens avec les populations riveraines et les autorités municipales. L'analyse des résultats indique que plusieurs unités de production sont installées le long de la voie ...

  10. The construction of standardised equipment expressly adapted to the different methods of radiation control; Realisation de materiel standardise specialement adapte aux divers modes de controle des radiations

    Energy Technology Data Exchange (ETDEWEB)

    Savouyaud, J; Menoux, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The authors show what general characteristics must have equipment designed for radiation control. This equipment must make possible the measurement of doses corresponding to 1/10 of the maximum permissible limit. It should be designed for a specific purpose, and finally it should be independent as far as possible. The authors review the different types of control which it is necessary to effect. (author) [French] Les auteurs indiquent quelles doivent etre les caracteristiques generales du materiel de controle des radiations. Ce materiel doit permettre l'appreciation de mesures correspondant au 1/10{sup e} des limites maximales admissibles. Il devrait etre concu pour une fonction determinee, enfin, il doit etre dans la mesure du possible, autonome. Les auteurs passent en revue les differents types de controle qu'il est necessaire de couvrir. (auteur)

  11. Equipment repair in coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, S

    1982-01-01

    Most equipment in Chinese coal mines consists of machinery and equipment produced in the 1950s; the efficiency of 4-62, CTD-57 and 70B/sub 2/ ventilators is 15% lower than that of new ones; that of SSM and AYaP pumps, 10% lower than of modern ones. Equipment renovation is done in three ways: replacing obsolete equipment with new equipment of the same type; improving the performance of existing equipment by introducing efficiency and reconstruction; and replacing obsolete equipment with advanced equipment. It is indicated that the second way, for example, replacement of 4-62 ventilator blades with a maximum efficiency of 73% by 4-72 ventilator blades raises its efficiency to 90%. Replacing the 8DA-8x3 water pump, having a maximum efficiency of 63%, with the 200D 43x3 pump with a maximum efficiency of 78%, enables an electricity savings of 7000 yuan per year, which exceeds all replacement costs (600 yuan). The need to improve equipment maintenance and preventive work to increase equipment service life and to introduce new techniques and efficiency is noted.

  12. Les atomes existent-ils vraiment ?

    CERN Document Server

    Diu, Bernard

    1997-01-01

    Peu de notions scientifiques ont autant suscité l'imagination spéculative que l'entropie thermodynamique. Tous les systèmes organisés - les sociétés, les êtres vivants - seraient promis à la décadence, à la mort, forcément. Ce livre expose en toute clarté le développement historique et conceptuel de la thermodynamique. Née du désir de comprendre et de maîtriser le fonctionnement des machines à vapeur - emblème de nos sociétés industrielles -, elle est devenue la science des corps, de tous les corps à notre échelle. Mais elle se passait sans états d'âme de l'hypothèse atomique. Elle a donc été battue en brèche par la mécanique statistique qui faisait droit aux impératifs dictés par la structure atomique des corps. Après une lutte épique, et même sanglante, thermodynamique et mécanique statistique se sont réconciliées sur les fondements de la seconde mais avec les techniques de la première. Ce livre se lit comme un roman de physique contemporaine.

  13. Implicit LES using adaptive filtering

    Science.gov (United States)

    Sun, Guangrui; Domaradzki, Julian A.

    2018-04-01

    In implicit large eddy simulations (ILES) numerical dissipation prevents buildup of small scale energy in a manner similar to the explicit subgrid scale (SGS) models. If spectral methods are used the numerical dissipation is negligible but it can be introduced by applying a low-pass filter in the physical space, resulting in an effective ILES. In the present work we provide a comprehensive analysis of the numerical dissipation produced by different filtering operations in a turbulent channel flow simulated using a non-dissipative, pseudo-spectral Navier-Stokes solver. The amount of numerical dissipation imparted by filtering can be easily adjusted by changing how often a filter is applied. We show that when the additional numerical dissipation is close to the subgrid-scale (SGS) dissipation of an explicit LES the overall accuracy of ILES is also comparable, indicating that periodic filtering can replace explicit SGS models. A new method is proposed, which does not require any prior knowledge of a flow, to determine the filtering period adaptively. Once an optimal filtering period is found, the accuracy of ILES is significantly improved at low implementation complexity and computational cost. The method is general, performing well for different Reynolds numbers, grid resolutions, and filter shapes.

  14. Smart Structures for Aircraft and Spacecraft (Les Structures Intelligentes pour les Aeronefs et les Vaisseaux Spatiaux)

    Science.gov (United States)

    1993-04-01

    mainly done manually using hand held equipment. Aircraft operation is only accepted to be economical when repair is identified in less than 1 out of...mounting requirements, and the available space. The panel consists of a layer of Lockheed high thermal performance ( HTP ) insulation which is a rigid...sensor The HTP material has low density and dielectric experiments, record subsystem sensor data in its constant. own 32 Mbyte SSDR, process raw data as

  15. 21 CFR 866.4540 - Immunonephelometer equipment.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4540 Immunonephelometer equipment. (a) Identification. Immunonephelometer equipment for clinical use...

  16. 21 CFR 866.4520 - Immunofluorometer equipment.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Immunology Laboratory Equipment and Reagents § 866.4520 Immunofluorometer equipment. (a) Identification. Immunofluorometer equipment for clinical use with...

  17. Equipment standards for interventional cardiology

    International Nuclear Information System (INIS)

    Dowling, A.; Gallagher, A.; Walsh, C.; Malone, J.

    2005-01-01

    Interventional radiology has seen rapid growth in cardiology and represents an alternative to hazardous surgery. Recently there has been a substantial growth in the number of procedures being performed and interventional cardiology (IC) procedures are the most common interventional procedures in Europe. Advances in imaging technology have facilitated the development of increasingly complex radiological IC equipment. Currently, the technology is developing at a rate ahead of supporting research, equipment standards and a regulatory framework. International standards play a key role in the design, manufacture and performance of radiological IC equipment. A survey of 12 IC systems (15 imaging chains) was conducted in Irish hospitals. The aim of the study was to assess the imbalance between rapidly advancing technology and existing standards and to propose recommendations for new IC equipment standards. The results demonstrate the need for definitive equipment requirements and standardisation in the design, manufacture, acceptance and maintenance of IC equipment. (authors)

  18. Generation of equipment response spectrum considering equipment-structure interaction

    International Nuclear Information System (INIS)

    Lee, Sang Hoon; Yoo, Kwang Hoon

    2005-01-01

    Floor response spectra for dynamic response of subsystem such as equipment, or piping in nuclear power plant are usually generated without considering dynamic interaction between main structure and subsystem. Since the dynamic structural response generally has the narrow-banded shapes, the resulting floor response spectra developed for various locations in the structure usually have high spectral peak amplitudes in the narrow frequency bands corresponding to the natural frequencies of the structural system. The application of such spectra for design of subsystems often leads to excessive design conservatisms, especially when the equipment frequency and structure are at resonance condition. Thus, in order to provide a rational and realistic design input for dynamic analysis and design of equipment, dynamic equipment-structure interaction (ESI) should be considered in developing equipment response spectrum which is particularly important for equipment at the resonance condition. Many analytical methods have been proposed in the past for developing equipment response spectra considering ESI. However, most of these methods have not been adapted to the practical applications because of either the complexities or the lack of rigorousness of the methods. At one hand, mass ratio among the equipment and structure was used as an important parameter to obtain equipment response spectra. Similarly, Tseng has also proposed the analytical method for developing equipment response spectra using mass ratio in the frequency domain. This method is analytically rigorous and can be easily validated. It is based on the dynamic substructuring method as applied to the dynamic soil-structure interaction (SSI) analysis, and can relatively easily be implemented for practical applications without to change the current dynamic analysis and design practice for subsystems. The equipment response spectra derived in this study are also based on Tseng's proposed method

  19. Determination of tributyltin (TBT) in marine sediment using pressurised liquid extraction-gas chromatography-isotope dilution mass spectrometry (PLE-GC-IDMS) with a hexane-tropolone mixture.

    Science.gov (United States)

    Konieczka, Piotr; Sejerøe-Olsen, Berit; Linsinger, Thomas P J; Schimmel, Heinz

    2007-06-01

    Extraction conditions for the determination of tributyltin (TBT) in sediment samples have been developed further. The analytical procedure is based on spiking with isotopically labelled analyte, pressurised liquid extraction (PLE) with a hexane/tropolone mixture, Grignard derivatization and quantification by GC-MS. It was applied to two unknown sediment samples as part of an intercomparison exercise of the Comité Consultatif pour la Quantité de Matière (CCQM). The detection limit was approximately 1.5 ng/g TBT as Sn, while the repeatability and intermediate precision (as the coefficient of variation) were 1.9% and 3.2%, respectively. The expanded uncertainty was 6.2% (coverage factor k = 2), and the accuracy was confirmed by measurement of a certified reference material.

  20. Overall Equipment Effectiveness Implementation Criteria

    Science.gov (United States)

    Abramova, I. G.; Abramov, D. A.

    2018-01-01

    This article documents the methods applied in production control technics specifically focused on commonly used parameter OEE (Overall Equipment Effectiveness). The indicators of extensive and intensive use of equipment are considered. Their appointment this is comparison in the same type of production within the industry and comparison of single-type and / or different types of equipment in terms of capacity. However, it is shown that there is no possibility of revealing the reasons for the machine’s operation: productive / unproductive, with disturbances. Therefore, in the article reveals the approaches to calculating the indicator characterizing the direct operation of the equipment. The Machine Load coefficient is approaching closely to the indicator of the efficiency of the use of equipment. Methods analysis is proceeded through the historically applied techniques such as “Stopwatch” and “Motion” studies. Was performed the analysis of the efficiency index of OEE equipment using the comparable indexes performance of equipment in the Russian practice. An important indicator of OEE contains three components. The meaning of each of them reflects historically applicable indicators. The value of the availability of equipment indicator is close to the value of the equipment extensibility index. The value of the indicator of the efficiency of work can be compared with the characteristic of the capacity of the equipment and the indicator of the quality level can meet the requirements for compliance with the manufacturing technology. Shown that the sum of the values of the coefficient of “Availability” of the equipment and the value of the “Factor of compaction of working hours” are one. As well as the total value of the indicator “level of quality” and the coefficient of marriage given in the result unit. The measurability of the indicators makes it possible to make a prediction about efficiency of the equipment.

  1. Compactification de la Supergravite 10-D Sur les Varietes de Calabi-Yau

    Science.gov (United States)

    Gagnon, Michel

    Les varietes de Calabi-Yau permettent une description relativement simple et assez juste de la realite. Recemment, de nombreuses equipes de recherche s'y sont interessees, en particulier P. Candelas, A. M. Dale, C. A. Lutken et R. Schimmrigk (13) qui ont propose une liste de 7868 configurations distinctes. Toutefois, nous croyons que certaines des techniques qui sont exploitees pour construire cette liste ne sont pas suffisamment justifiees et ont pour effet de soustraire a nos investigations bon nombre de configurations potentiellement interessantes. Ainsi, nous produisons, sans utiliser ces techniques simplificatrices, une liste de 97360 configurations. Ensuite, dans le cadre des modeles a 4 generations, nous appliquons un ensemble de criteres, fondes sur les symetries discretes, pour delimiter le domaine des configurations phenomenologiquement viables. Finalement, apres avoir fixe notre choix sur une configuration particuliere, nous essayons de montrer tout l'interet physique des varietes de Calabi-Yau en exposant certains aspects de la phenomenologie a basse energie, notamment les nombres quantiques, les spectres fermioniques, la brisure intermediaire du groupe de jauge et la duree de vie du proton.

  2. Information technology equipment cooling system

    Science.gov (United States)

    Schultz, Mark D.

    2014-06-10

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

  3. Management methodology for pressure equipment

    Science.gov (United States)

    Bletchly, P. J.

    Pressure equipment constitutes a significant investment in capital and a major proportion of potential high-risk plant in many operations and this is particularly so in an alumina refinery. In many jurisdictions pressure equipment is also subject to statutory regulation that imposes obligations on Owners of the equipment with respect to workplace safety. Most modern technical standards and industry codes of practice employ a risk-based approach to support better decision making with respect to pressure equipment. For a management system to be effective it must demonstrate that risk is being managed within acceptable limits.

  4. Biomass equipments. The wood-fueled heating plants; Materiels pour la biomasse. Les chaudieres bois

    Energy Technology Data Exchange (ETDEWEB)

    Chieze, B. [SA Compte R, 63 - Arlanc (France)

    1997-12-31

    This paper analyzes the consequences of the classification of biomass fuels in the French 2910 by-law on the classification of biomass-fueled combustion installations. Biomass fuels used in such installations must be only wood wastes without any treatment or coating. The design of biomass combustion systems must follow several specifications relative to the fueling system, the combustion chamber, the heat exchanger and the treatment of exhaust gases. Other technical solutions must be studied for other type of wood wastes in order to respect the environmental pollution laws. (J.S.)

  5. Les coopératives, sources d'espoir pour les Marocaines | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    exploiter une ressource forestière fort précieuse qui est menacée, l'arganier, ont permis de hausser considérablement les revenus des femmes berbères. Regroupées en petites coopératives, les femmes produisent de l'huile ...

  6. Jeunes agripreneurs : Élargir les possibilités pour les jeunes dans le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    activités agro-alimentaires en vue d'assurer la transformation agricole et l'emploi des jeunes en Afrique. Ce projet déterminera, élaborera et mettra à l'essai sur le terrain des modèles d'entreprise créatifs et audacieux pour aider les jeunes ...

  7. Accélérer les mesures de lutte contre les changements climatiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    23 avr. 2018 ... Centre de recherches pour le développement international ... Le CRDI a conclu des ententes de coopération scientifique et technique avec ... Ces ententes établissent le cadre de coopération et définissent les droits et les ...

  8. Compréhension des relations entre les think tanks et les universités ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    pmartin@idrc.ca

    18 mars 2013 ... indépendantes de recherche sur les politiques – ou « think tanks .... l'affectation des ressources, le recrutement et le maintien en poste .... Stratégie pour synthétiser et communiquer efficacement les résultats de recherche et.

  9. Les mesures de gel et de confiscation en vertu de la Loi sur les embargos

    OpenAIRE

    Schnyder, Nicolas

    2009-01-01

    Etude du mécanisme d'adoption des mesures de gel et de confiscation en vertu de la Loi sur les embargos et leurs conséquences tant sur la personne principalement touchée par ces mesures que sur les tiers.

  10. Les troubles gonadiques chez les hémodialysés chroniques à l ...

    African Journals Online (AJOL)

    étude montre une forte prévalence des manifestations cliniques des troubles gonadiques chez les patients en hémodialyse chronique. Aussi elles doivent être recherchées afin de mieux les prendre en charge, car ces troubles sont vécus par ...

  11. Gradients socioéconomiques du risque cardiovasculaire chez les enfants et les adolescents canadiens

    Directory of Open Access Journals (Sweden)

    Y. Shi

    2016-01-01

    Full Text Available Introduction : Les maladies cardiovasculaires (MCV et leurs facteurs de risque présentent des gradients socioéconomiques clairs chez les adultes canadiens, mais présentent des ambiguïtés chez les enfants. L'objectif de cette étude est de vérifier l'existence ou non de gradients socioéconomiques dans les marqueurs physiologiques du risque de MCV chez les enfants et les adolescents canadiens. Méthodologie : À partir des données transversales combinées de l'Enquête canadienne sur les mesures de la santé 2007-2011, nous avons étudié, chez 2 149 enfants (6 à 11 ans et 2 073 adolescents (12 à 17 ans et selon le sexe, les marqueurs de risque cardiovasculaire suivants : excès de poids (y compris l'obésité, score de capacité aérobique (SCA, pression artérielle (PA, lipides sanguins (totaux, cholestérol LDL et HDL, triglycérides, métabolisme du glucose et protéine C réactive (CRP. Des analyses de régression logistique et de régression linéaire multidimensionnelles ont permis de dégager les tendances relatives au risque cardiovasculaire en fonction de la suffisance du revenu du ménage et du niveau de scolarité des parents, après ajustement en fonction de l'âge et de l'origine ethnique, et après stratification par groupe d'âge et par sexe. Résultats : La prévalence de l'obésité était sensiblement plus élevée chez les jeunes garçons que chez les jeunes filles (prévalence de 18,5 %, intervalle de confiance [IC] à 95 % : 15,6 à 21,5 contre 7,7 %, IC à 95 % : 5,2 à 10,3. Toutefois, des gradients socioéconomiques négatifs ont été observés en ce qui concerne le risque d'adiposité chez les jeunes filles et les adolescentes, et non chez les garçons. Parmi les enfants et les adolescents, les garçons étaient en meilleure condition physique que les filles (SCA moyen de 541, IC à 95 % : 534 à 546 contre 501, IC à 95 % : 498 à 505 chez les enfants; 522, IC à 95 % : 514 à 529 contre 460, IC à 95 % : 454

  12. 29 CFR 1926.952 - Mechanical equipment.

    Science.gov (United States)

    2010-07-01

    ... equipment that are not covered with insulating protective equipment. (c) Derrick trucks, cranes and other lifting equipment. (1) All derrick trucks, cranes and other lifting equipment shall comply with subpart N...

  13. 22 CFR 135.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  14. 21 CFR 1403.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  15. 45 CFR 602.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  16. 49 CFR 18.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  17. 34 CFR 80.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  18. 10 CFR 600.232 - Equipment.

    Science.gov (United States)

    2010-01-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  19. 45 CFR 1183.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... specifically permitted or contemplated by Federal statute. (4) When acquiring replacement equipment, the...) Management requirements. Procedures for managing equipment (including replacement equipment), whether... return. (e) Disposition. When original or replacement equipment acquired under a grant or subgrant is no...

  20. Prise en charge de l’infection gonococcique chez les adultes et les jeunes

    Science.gov (United States)

    Pogany, Lisa; Romanowski, Barbara; Robinson, Joan; Gale-Rowe, Margaret; Latham-Carmanico, Cathy; Weir, Christine; Wong, Tom

    2015-01-01

    Résumé Objectif Présenter des recommandations sur la prise en charge de l’infection gonococcique chez les adultes et les jeunes. Qualité des données Les recommandations thérapeutiques des lignes directrices canadiennes sur les infections transmissibles sexuellement reposent sur une recherche documentaire de même que sur des catégories de recommandations et des niveaux de qualité de données déterminés par au moins 2 évaluateurs. Les recommandations ont été revues par des pairs et sont en instance d’approbation par le groupe de travail d’experts. Message principal Les nouvelles recommandations portant sur la prise en charge de l’infection gonococcique chez les adultes et les jeunes préconisent les cultures à titre d’outil diagnostique lorsqu’elles sont pratiques, le traitement par antibiothérapie combinée (ceftriaxone associée à l’azithromycine) et le signalement sans délai de tous les cas dont le traitement a échoué aux autorités de santé publique. Conclusion Si elles sont suivies, ces nouvelles recommandations pourraient réduire l’échec thérapeutique, contribuer à une surveillance plus étroite des tendances à la résistance de Neisseria gonorrhoeae aux antibiotiques et contribuer à prévenir la transmission de gonorrhée résistante à plusieurs médicaments.

  1. Food Service Equipment and Appurtenances.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI.

    Equipment design specifications are presented relating to tables of all kinds, counters, sinks and drainboards, bins, shelves, drawers, hoods and similar kitchen appurtenances, not including baking, roasting, toasting, broiling or frying equipment, food preparation machinery such as slicers, choppers, and cutters, mixers and grinders, steam…

  2. LES of Gas Exchange in IC Engines

    Directory of Open Access Journals (Sweden)

    Mittal V.

    2013-10-01

    Full Text Available As engine technologies become increasingly complex and engines are driven to new operating points, understanding transient phenomena is important to ensure reliable engine operation. Unlike Reynolds Averaged Navier-Stokes (RANS studies that only provide cycle-averaged information, Large Eddy Simulation (LES studies are capable of simulating cycle-to-cycle dynamics. In this work, a finite difference based structured methodology for LES of IC engines is presented. This structured approach allows for an efficient mesh generation process and provides potential for higher order numerical accuracy. An efficient parallel scalable block decomposition is done to overcome the challenges associated with the low ratio of fluid elements to overall mesh elements. The motion of the valves and piston is handled using a dynamic cell blanking approach and the Arbitrary Lagrangian Eulerian (ALE method, respectively. Modified three-dimensional Navier-Stokes Characteristic Boundary Conditions (NSCBC are used in the simulation to prescribe conditions in the manifolds. The accuracy of the simulation framework is validated using various canonical configurations. Flow bench simulations of an axisymmetric configuration and an actual engine geometry are done with the LES methodology. Simulations of the gas exchange in an engine under motored conditions are also performed. Overall, good agreement is obtained with experiments for all the cases. Therefore, this framework can be used for LES of engine simulations. In the future, reactive LES simulations will be performed using this framework.

  3. Les nuits de Shanghaï

    Directory of Open Access Journals (Sweden)

    Wenbo Hu

    2017-03-01

    Full Text Available Cet article vise à repérer lesles d’animation nocturnes dans la métropole de Shanghaï à partir de données participatives issues des réseaux numériques sociaux. Les données spatio-temporelles sont collectées sur SINA Micro-blog, le « Facebook » chinois sur lequel des individus partagent leur expérience vécue et personnelle. Le traitement de ces données géo-localisées fournit un moyen de repérage et d’analyse des polarités urbaines centripètes dans l’espace et dans le temps. Des immersions complémentaires dans ces secteurs urbains permettent de vérifier et de mieux appréhender les dynamiques de la vie nocturne et les comportements spatio-temporels des individus.

  4. LES MEDICAMENTS FALSIFIES, CRIME SANS CHATIMENT

    Directory of Open Access Journals (Sweden)

    Marc GENTILINI

    2017-05-01

    Full Text Available Le trafic de faux médicaments n’est pas un phénomène récent, mais un fléau qui s’aggrave. Plus mortel que le Paludisme et plus rentable que le trafic des drogues, il menace tant la santé des populations que le développement économique des pays les plus pauvres. Des anticancéreux aux traitements des dysfonctionnements érectiles, princeps ou génériques, tous les types de médicaments font l’objet de falsification. Profitant de la mondialisation des échanges et de l’essor d’Internet, ce trafic mortifère s’est développé et s’étend désormais sur les 5 continents. Considéré comme « le plus gros marché noir du monde », il reste pourtant sous-estimé, voire méconnu, du grand public, des professionnels de santé et des dirigeants politiques. La prise de conscience à tous les niveaux des risques engendrés par les médicaments falsifiés est une urgence vitale.

  5. Quand les images citent l'art !

    Directory of Open Access Journals (Sweden)

    Anne Pauzet

    2014-04-01

    Full Text Available Les images mass-médiatiques courantes (illustration d’articles de presse, images publicitaires, affiches politiques et sociales… citent bien souvent le domaine de l’Art (peintures, sculptures, photographies, images filmiques…. Ce dernier devient alors un univers de références à découvrir pour comprendre le message exprimé. De plus, découvrir les liens qui unissent les images du quotidien aux œuvres artistiques nous aide à mieux comprendre les sociétés dans lesquelles ces images sont produites. Cet article pose la question du lien entre les images, l’Art et l’imaginaire collectif et propose une réflexion didactique autour de ces liens. When images quote Art! Common mass media images such as illustrations for press articles, advertising pictures, political and social posters often quote the field of Art (paintings, sculptures, photos, film images…. Art thus becomes a world of references to be discovered in order to understand the conveyed message. Moreover, finding the links between the daily life pictures and the artistic piece helps people understand the societies in which those pictures are produced. This article discusses the relationship between images, Art and collective imagination and carries out a didactical reflection on those links.

  6. Equipe de trabalho

    Directory of Open Access Journals (Sweden)

    Gabriel Gerber Hornink

    2014-08-01

    Full Text Available   Equipe de Trabalho 2014 1. Equipe editorial Editor-Chefe Bayardo Bapstista Torres, Instituto de Química - USP, Brasil Eduardo Galembeck, Departamento de Bioquímica Instituto de Biologia UNICAMP, Brasil   Editores Gabriel Gerber Hornink, Depto. Bioquímica, Instituto de Ciências Biomédicas, Universidade - Federal de Alfenas - Unifal-MG, Brasil Vera Maria Treis Trindade, Instituto de Ciências Básicas da Saúde, Departamento de Bioquímica, Universidade Federal do Rio Grande do Sul, Brasil   Corpo Editorial Adriana Cassina, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Angel Herráez, Departamento de Bioquímica y Biología molecular, Universidad de Alcalá de Henares, Madrid, Espanha André Amaral Gonçalves Bianco, Universidade Federal de São Paulo (Unifesp, Brasil Denise Vaz de Macedo, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Eneida de Paula, Departamento de Bioquímica, Instituto de Biologia, Universidade Estadual de Campinas - Unicamp, Brasil Guilherme Andrade Marson, Instituto de Química - USP, Brasil Jose Antonio Martinez Oyanedel, Universidad de Concepción, Chile Josep Maria Fernández Novell, Dept. Bioquímica i Biologia Molecular Universitat de Barcelona, Espanha Leila Maria Beltramini, Instituto de Física de São Carlos, Universidade Estadual de São Paulo - USP, Brasil Manuel João da Costa, Escola de Ciências da Saúde, Universidade do Minho, Portugal Maria Lucia Bianconi, Instituto de Bioquímica Médica Universidade Federal do Rio de Janeiro (UFRJ, Brasil María Noel Alvarez, Departamento de Bioquímica, Facultad de Medicina, Universidad de la República, Uruguai Miguel Ángel Medina Torres, Department of Molecular Biology & Biochemistry Faculty of Sciences University of Málaga, Espanha Nelma Regina Segnini Bossolan, Instituto de Física de São Carlos, Universidade de São Paulo - USP, Brasil Paulo De Avila

  7. Information technology equipment cooling method

    Science.gov (United States)

    Schultz, Mark D.

    2015-10-20

    According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools air utilized by the rack of information technology equipment to cool the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat generated by the rack of information technology equipment.

  8. Manger hors norme, respecter les normes

    OpenAIRE

    Régnier, Faustine

    2007-01-01

    Fondée sur un corpus de près de 10 000 recettes de cuisine de la presse féminine française et allemande (1930‑2000), cette contribution met en évidence la façon dont l’exotisme permet de manger hors norme tout en restant dans les normes. Les pratiques culinaires étrangères ne peuvent être adoptées qu’au terme d’un travail de normalisation. Elles sont modifiées de manière à ce que soient respectées les normes du pays d’accueil, par là même mises en œuvre. Elles sont donc conçues comme un ensem...

  9. Deux livres pour penser les sciences

    Directory of Open Access Journals (Sweden)

    Laurent Matthey

    2008-06-01

    Full Text Available Qu’est-ce que la science ? Existe-t-il, entre les différentes disciplines, des éléments qui permettent de parler d’une science au singulier ? Ou le pluriel est-il de rigueur, l’éclatement des traditions et habitudes de recherche nécessitant que l’on parle plutôt de sciences ? Quel est le rapport que la pratique scientifique entretient avec le réel ? Les théories que livrent les chercheurs décrivent-elles un monde externe ? Ne font-elles que cela ? On bien faut-il voir ces théories comme des «...

  10. Els hydrofoils i les seves aplicacions

    OpenAIRE

    Grygus Viñas, Josep

    2014-01-01

    “Els hydrofoils i les seves aplicacions” és un treball englobat en l’àrea de la Mecànica de Fluids realitzat per conèixer què són i com funcionen els hydrofoils o hidroales i per estudiar la seva incorporació en una embarcació concreta. Es tracta d’unes superfícies sustentadores en forma d’ala que s’incorporen sota els cascos de les embarcacions per elevar-les respecte el nivell de l’aigua de manera que sembla que l’embarcació estigui volant. D’aquesta manera s’aporta, a més d’espectacular...

  11. La perception enfantine des rôles de sexe : quelles différences avec les adultes

    OpenAIRE

    Tostain, Manuel; Le Breuilly, Joëlle

    2005-01-01

    International audience; Dans cette recherche, nous avons étudié les liens entre tolérance à la transgression des rôles de sexe et explications de l'origine des différences entre sexes. Les sujets, des enfants de 7-8 ans et des adultes (des étudiants), devaient évaluer des transgressions de rôles de sexe réalisées par des hommes et par des femmes, puis se positionner au regard des explications biologiques, sociales ou personnelles des différences entre sexes. Les résultats montrent que :1) les...

  12. Development of manufacturing equipment and QC equipment for DUPIC fuel

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, J.J.; Lee, J.W.; Kim, S.S.; Yim, S.P.; Kim, J.H.; Kim, K.H.; Na, S.H.; Kim, W.K.; Shin, J.M.; Lee, D.Y.; Cho, K.H.; Lee, Y.S.; Sohn, J.S.; Kim, M.J.

    1999-05-01

    In this study, DUPIC powder and pellet fabrication equipment, welding system, QC equipment, and fission gas treatment are developed to fabricate DUPIC fuel at IMEF M6 hot cell. The systems are improved to be suitable for remote operation and maintenance with the manipulator at hot cell. Powder and pellet fabrication equipment have been recently developed. The systems are under performance test to check remote operation and maintenance. Welding chamber and jigs are designed and developed to remotely weld DUPIC fuel rod with manipulators at hot cell. Remote quality control equipment are being tested for analysis and inspection of DUPIC fuel characteristics at hot cell. And trapping characteristics is analyzed for cesium and ruthenium released under oxidation/reduction and sintering processes. The design criteria and process flow diagram of fission gas treatment system are prepared incorporating the experimental results. The fission gas treatment system has been successfully manufactured. (Author). 33 refs., 14 tabs., 91 figs

  13. Les travaux d'utilité collective

    OpenAIRE

    Marchal, Emmanuelle

    1988-01-01

    Une étude réalisée par le CEE en 1986 avait permis d'analyser les conditions dans lesquelles différents organismes publics utilisaient les stagiaires TUC. Des spécificités importantes concernant le mode de sélection, ainsi que l'organisation des stages, conduisaient à identifier plusieurs politiques des organismes : occupation des jeunes stagiaires dans des petites communes pour atténuer le chômage, stages de formation professionnelle supposant une sélection rigoureuse, ou encore situation...

  14. Les frameworks au coeur des applications web

    OpenAIRE

    Moro, Arielle; Daehne, Peter

    2010-01-01

    Depuis quelques années, Internet est vraiment entré dans les mœurs : tant dans les entreprises qu’au sein de chaque foyer. En effet, Internet permet de communiquer à travers le monde en quelques secondes, de vendre toute sorte de produits en déployant des solutions e-commerce facilement et bien d’autres choses. Internet est donc un véritable vecteur de communication, de commerce et à présent, avec le Web 2.0, un vrai berceau d’informations (tant des informations personnelles que des informati...

  15. Les chercheurs ont constaté que le conflit touchait les femmes de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    khaggart

    Les chercheurs ont constaté que le conflit touchait les femmes de deux façons. Sur le plan juridique, elles ont des droits égaux à la terre, mais la société ne leur reconnaît guère ces droits. Les femmes déplacées qui ont perdu leur terre et leur mari (parce que celui-ci a été tué) souffrent d'une double injustice, car, en tant ...

  16. Penser les métropoles pour les « individus » ?

    Directory of Open Access Journals (Sweden)

    Marc Dumont

    2006-03-01

    Full Text Available Les instruments dont on dispose aujourd’hui pour décrire et expliquer les réalités métropolitaines contemporaines ne sont pas entièrement satisfaisants : ils ne permettent pas toujours d’identifier les vraies questions qui se présentent à ceux qui produisent la ville. Partant de ce constat, le sociologue Alain Bourdin synthétise dans son nouvel essai des réflexions issues de sa pratique de recherche et de dialogue avec le monde des institutions, pour y proposer une lecture de la ...

  17. Des agriculteurs déterminent les innovations et les pratiques qui ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    16 sept. 2013 ... Les chercheurs ont constaté que les agriculteurs préféraient des cultures de valeur élevée telles que le mil et le sorgho au maïs, car elles se vendent à meilleur prix et résistent mieux à la sécheresse. Les agriculteurs apprécient tout particulièrement le sorgho gadam parce qu'il existe déjà un client local, ...

  18. TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive

  19. Containment and Surveillance Equipment Compendium

    International Nuclear Information System (INIS)

    Luetters, F.O.

    1980-02-01

    The Containment and Surveillance Equipment Compendium contains information sections describing the application and status of seals, optical surveillance systems, and monitors for international safeguards systems. The Compendium is a collection of information on equipment in use (generally by the IAEA) or under development in the US in diverse programs being conducted at numerous facilities under different sponsors. The Compendium establishes a baseline for the status and applications of C/S equipment and is a tool to assist in the planning of future C/S hardware development activities. The Appendix contains design concepts which can be developed to meet future goals

  20. Les paradoxes de la matière

    CERN Document Server

    2013-01-01

    Si nous devons la multitude d’appareils numériques actuels à l’électronique, celle-ci atteint ses limites. Comment les dépasser ? En explorant les propriétés spectaculaires de la matière ! Et les candidats au remplacement de l’électronique sont nombreux : oxytronique, spintronique, plasmonique, magnonique, graphène... Nous réservant aussi bien d’autres surprises - tels les capes d’invisibilité, les plastiques conducteurs, les polymères autocicatrisants, les protections antisismiques, etc - les études sur la matière n’ont pas fini de nous étonner.

  1. Sociétés certifiées B : favoriser les occasions pour les femmes et les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... et a augmenté les occasions sur le marché du travail en Amérique latine. ... Fundación Impulsora de un Nuevo Sector en la Economía Sistema B. Institution Country. Chile ... IDRC panel tackles early marriage at UN Status of Women forum.

  2. Justice devant les tribunaux, réparations et reddition de comptes en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Justice devant les tribunaux, réparations et reddition de comptes en lien avec les massacres religieux ou liés à la caste en Inde. La constitution laïque de l'Inde protège les minorités religieuses, les dalits et les communautés tribales et garantit à tous les citoyens l'égalité devant la loi. Or, dans les faits, les épisodes ...

  3. Al clamor de les vuvuzeles

    Directory of Open Access Journals (Sweden)

    Javier Olivera Betrán

    2010-09-01

    Full Text Available El Mundial de Futbol de Sud-àfrica ha situat l’Àfrica al mapa mundial i ha mostrat al món el triomf de l’estil de futbol d’Espanya basat en la col·lectivitat, l’esperit d’equip, la humilitat, la cohesió interna i el joc bonic. L’organització africana, seriosa i eficaç, ha sabut mobilitzar i il·lusionar la població del país que ha participat en el mundial des de l’orgull de ser africà, amb l’esperit alegre, festiu i també reivindicatiu de la gent de l’Àfrica. Aquest esdeveniment suposa el llançament de la marca “Sud-àfrica” al món amb un avís clar d’optar a l’organització d’uns primers Jocs Olímpics a Àfrica (potser els de 2020. S’obre una finestra d’esperança al segle xxi per al continent perdut de la mà de l’esport espectacle tan universal, massiu, emocional i mercantil que també es juga a la canxa de la política i de l’economia.

  4. 394 Les fruits de Cycas (Cycadacea) des Comores : utilisation ...

    African Journals Online (AJOL)

    ibrahim

    Les Cycas sont des gymnospermes archaïques dont les fruits fournissent des amandes fortement appréciées dans l'alimentation par les populations ancestrales des Comores. Le screening phytochimique réalisé sur les amandes fraiches et sèches de ces fruits a révélé la présence d'alcaloides, de triterpènes et de stérols ...

  5. Facteurs predictifs d'atteinte ganglionnaire centrale dans les ...

    African Journals Online (AJOL)

    Les cancers papillaires et vésiculaires de la thyroïde sont les cancers endocriniens les plus fréquents. L'envahissement ganglionnaire semble peu influencer la survie globale, mais majore les risques de récidive locorégionale et de métastases à distance. Cet envahissement est une complication fréquente des cancers ...

  6. La pisciculture permet de lutter contre les carences alimentaires au ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    11 avr. 2014 ... Dans la province de Prey Veng, au Cambodge, les agriculteurs jouent un rôle fondamental dans l'essai d'un nouveau système d'exploitation agricole conçu pour contrer ... Il vise tout particulièrement les personnes vulnérables, à savoir les enfants de moins de cinq ans et les femmes en âge de procréer.

  7. Recherche-action mondiale sur les droits forestiers | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... grande échelle les expériences locales et la modification des politiques nationales venant faciliter la gestion locale des forêts. De plus, ce projet permettra de faire mieux connaître la foresterie communautaire à l'échelle internationale, car les constatations seront diffusées et les partenaires du PRR utiliseront les résultats.

  8. Comment rendre les villes plus sûres

    International Development Research Centre (IDRC) Digital Library (Canada)

    qui travaillent à l'initiative Villes sûres et inclusives font la lumière sur ce qui fonctionne – et ne fonctionne pas – pour rendre les villes plus sûres. Le présent compte rendu comporte certains enseignements tirés de leur travail, ainsi que les lacunes dans les connaissances et les domaines où il faut poursuivre la recherche.

  9. Data Center Equipment Location and Monitoring System

    DEFF Research Database (Denmark)

    2013-01-01

    Abstract: Data center equipment location systems include hardware and software to provide information on the location, monitoring, and security of servers and other equipment in equipment racks. The systems provide a wired alternative to the wireless RFID tag system by using electronic ID tags...... connected to each piece of equipment, each electronic ID tag connected directly by wires to an equipment rack controller on the equipment rack. The equipment rack controllers link to a central control computer that provides an operator ...

  10. EAS Equipment Authorization Grantee Registrations

    Data.gov (United States)

    Federal Communications Commission — EAS (Equipment Authorization System). Radio Frequency (RF) devices are required to be properly authorized under 47 CFR Part 2 prior to being marketed or imported...

  11. ENERGY STAR Certified Imaging Equipment

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 2.0 ENERGY STAR Program Requirements for Imaging Equipment that are effective as of...

  12. EMR Measurements on NDA Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Macdonell, Alexander Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Meierbachtol, Krista Cruse [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Evans, James Walter Jr. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mayo, Douglas R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-10

    Electromagnetic radiation (EMR) emission strength measurements were performed on a suite of passive non-destructive assay (NDA) radiation detection equipment. Data were collected from 9 kHz up to 6 GHz on each of the assembled systems.

  13. Mongolia - Vocational Education - Equipment Upgrades

    Data.gov (United States)

    Millennium Challenge Corporation — Evaluation design The impact evaluation sought to identify the causal impact of exposure to equipment upgrades on subsequent outcomes. Insofar as we were not able to...

  14. Origins of eponymous orthopaedic equipment.

    Science.gov (United States)

    Meals, Clifton; Wang, Jeffrey

    2010-06-01

    Orthopaedists make great use of eponymous equipment, however the origins of these tools are unknown to many users. This history enriches, enlightens, and enhances surgical education, and may inspire modern innovation. We explored the origins of common and eponymous orthopaedic equipment. We selected pieces of equipment named for their inventors and in the broadest use by modern orthopaedists. We do not describe specialized orthopaedic implants and instruments owing to the overwhelming number of these devices. The history of this equipment reflects the coevolution of orthopaedics and battlefield medicine. Additionally, these stories evidence the primacy of elegant design and suggest that innovation is often a process of revision and refinement rather than sudden inspiration. Their history exposes surgical innovators as brilliant, lucky, hardworking, and sometimes odd. These stories amuse, enlighten, and may inspire modern orthopaedists to develop creative solutions of their own. The rich history of the field's eponymous instruments informs an ongoing tradition of innovation in orthopaedics.

  15. Operation monitor for plant equipment

    International Nuclear Information System (INIS)

    Kondo, Tetsufumi; Kanemoto, Shigeru.

    1991-01-01

    In a nuclear power plant, states of each of equipment in the plant are monitored accurately even under such a operation condition that the power is changed. That is, the fundamental idea is based on a model comparison method. A deviation between an output signal upon normal plant state obtained in a forecasting model device and that of the objective equipment in the plant are compared with a predetermined value. The result of the comparison is inputted to an alarm device to alarm the abnormality of the states of the equipment to an operator. The device of the present invention thus constituted can monitor the abnormality of the operation of equipment accurately even under such a condition that a power level fluctuates. As a result, it can remarkably contribute to mitigate operator's monitoring operation under the condition such as during load following operation. (I.S.)

  16. Les physiciens du CERN se font batisseurs de cavernes

    CERN Multimedia

    Augereau, J F

    2002-01-01

    Pour percer les secrets bien gardes de la nature, en particulier les origines de la masse, les chercheurs vont installer dans une de ces grottes un enorme detecteur de particules. Atlas, c'est son nom, sera place sur le trace du plus grand accelerateur du monde pour recueillir des indices (1 page).

  17. Les litiges fonciers et la marginalisation des jeunes stimulent le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    28 avr. 2016 ... Selon de nouvelles recherches, la violence chez les jeunes et les litiges fonciers, qui ont migré des communautés rurales aux quartiers pauvres des villes, sont les principaux vecteurs de violence et de criminalité en Côte d'Ivoire.

  18. Supprimer les obstacles pour renforcer l'autonomie des femmes ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 févr. 2011 ... Le Programme d'action de Beijing visait à rendre toutes les femmes autonomes. Mais avons-nous perdu quelque chose dans les batailles considérées comme remportées ? Et qu'avons-nous gagné dans les batailles considérées comme perdues ?

  19. Colombie : tous les projets | Page 6 | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Tant les écrits en sciences sociales que les responsables des politiques ont ... et les relations interagissant dans la diffusion, la production et l'utilisation de ... et de la communication (TIC) a élargi l'horizon des personnes handicapées, qui ...

  20. Note - Des macrophytes pour épurer les eaux ?

    Directory of Open Access Journals (Sweden)

    BOUTIN, Catherine

    2014-12-01

    Full Text Available Utiliser des macrophytes pour mieux satisfaire les besoins humains est une part importante des recherches qui les concernent. Pour l’épuration des eaux usées et les aménagements associés, qu’en est-il ?

  1. normes techniques et pratiques locales des producteurs dans les ...

    African Journals Online (AJOL)

    ACSS

    pour objectif d'analyser l'évolution des normes techniques de la production du riz et les pratiques locales dans les périmètres .... des systèmes de production agricole et du riz dans les ..... recommandations de l'encadrement technique local.

  2. Equipment improvements for performance enhancement

    International Nuclear Information System (INIS)

    Gaestel, P.; Guesnon, H.; Sauze, G.

    1994-01-01

    In order to enhance the reactor availability, several improvements on reactor equipment have been developed: design optimization for stator maintenance replacement in the main alternator; adjustment modification of stator coils in the main alternator for an easier maintenance; improvement of the fuel handling line (pole crane, transfer equipment, loading machine); development of a loose part trapping system in the steam generator secondary circuit. 1 tab

  3. Low level photoneutron detection equipment

    International Nuclear Information System (INIS)

    Ji Changsong; Zhang Yuqin; Li Yuansui

    1991-01-01

    A low level photoneutron detection equipment has been developed. The photoneutrons produced by interaction of 226 Ra gamma quanta and deutron (D) target are detected with n-n discrimination detector made up of 3 He proportional counter array. The D-content information in the target can be obtained from the measured photoneutron counts. The equipment developed is mainly used for nondestructive D-content measurement of D-devices

  4. FUSRAP equipment concept development study

    International Nuclear Information System (INIS)

    Hinerman, K.B.; Smith, R.E.

    1981-01-01

    Under DOE contract, Dalton-Dalton-Newport, Inc. is performing an engineering evaluation of three selected FUSRAP sites in an effort to generate equipment concepts to perform remedial action for retrieval, packaging, storing, and transporting contaminated soil and other debris. Along with this engineering evaluation, an analysis of state and Federal regulations was made which had significant impact on the selected equipment and costs for each remedial action concept

  5. Remotely operated replaceable process equipment

    International Nuclear Information System (INIS)

    Westendorf, H.

    1987-01-01

    The coupling process of pneumatic and electrical auxiliary lines of a pneumatic control pressure line in a large cell of the reprocessing plant is carried out, together with the coupling process of the connecting flange of the process equipment. The coupling places of the auxiliary lines, such as control or supply lines, are laid in the flange parts of the flanges to be connected. The pipe flange on the frame side remains flush with the connecting flange of the process equipment. (DG) [de

  6. Partners in qualified equipment supply

    International Nuclear Information System (INIS)

    Rygg, D.E.; O'Hare, G.J.

    1993-01-01

    Industry initiatives have been taken to improve procurement practices and commercial dedication programs, formation of procurement engineering groups, emphasis on product quality, and increased engineering involvement in procurement and maintenance of qualified equipment. This poses new challenges for many licensees in terms of resources, product knowledge, and access to information normally held proprietary by equipment suppliers. Alternative approaches to future licensee/Westinghouse relationships which will allow licensees to adapt to the changing environment are discussed. 2 figs

  7. Les premières Méditations en Hollande de 1820 à 1880

    NARCIS (Netherlands)

    Kool, Jakob Heije

    1923-01-01

    Ce fut de 1820 à 1830 que la gloire des Meditations atteguit en Hollande son apogée. Les témoignages d'amiration que contiennent les correspondances, les journeaux intimes, et les revnes de l'époque, puis les éditions qui turent publiées en hollande, et les traductions nombrenses qui y furent

  8. Rendement des entreprises en Asie - utilisation de données sur les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dans les pays en développement, toutefois, la grande majorité des micro et petites entreprises ne prennent jamais d'expansion et ne comptent que quelques ... Les entrepreneurs doivent également posséder les compétences, les ressources et les outils technologiques leur permettant de saisir les bonnes occasions qui se ...

  9. ZINC ET PROFIL IMMUNO-INFLAMMATOIRE CHEZ LES ENFANTS ET LES ADOLESCENTS DIABETIQUES DE TYPE 1

    OpenAIRE

    BESTAOUI, Abdelaziz

    2014-01-01

    Introduction : le diabète de type 1 (DT1) est une maladie autoimmune qui résulte de la destruction progressive et sélective des cellules-bêta pancréatiques. Objectifs : Ce travail consiste à déterminer les nivaux de zinc apporté par l’alimentation et de mesurer sa concentration sérique chez les diabétiques de type 1 et les sujets sains, contrôles. But : Montrer le rôle immuno-modulateur du zinc dans le processus d’auto-immunité inflammatoire au cours de DT1. Matériels et méthodes : t...

  10. Les infestations par les poux de tête : une mise à jour clinique.

    Science.gov (United States)

    Cummings, Carl; Finlay, Jane C; MacDonald, Noni E

    2018-02-01

    Les infestations par les poux de tête ( Pediculus humanus capitis ) ne constituent ni un risque sanitaire primaire ni un vecteur de maladie, mais représentent plutôt un problème de société au coût impor- tant. Pour diagnostiquer une infestation, il faut déceler un pou vivant. Même si les pyréthines et la perméthrine demeurent les traitements de première intention au Canada, la solution de myristate d'isopropyle et de ST-cyclométhicone et la diméticone peuvent être envisagées en deuxième intention après un échec thérapeutique démontré.

  11. Martine Grinberg. Écrire les coutumes. Les droits seigneuriaux en France

    Directory of Open Access Journals (Sweden)

    Maïté Lesné-Ferret

    2009-05-01

    Full Text Available L’auteur observe tout ce qu’a entraîné la mise par écrit des coutumes, toutes les interventions qui illustrent une clarification ou une modification de la pensée juridique. Les développements sont répartis en trois parties : après une description des droits seigneuriaux (p. 9 à 60, l’étude s’attache au travail d’interprétation mené par les juristes sur le droit coutumier, en particulier sur les droits féodaux – « Ecrire le droit. Le chantier des juristes » (p. 63 à 133 – et souligne le rapp...

  12. les cahiers du cread - Vol 101 (2012)

    African Journals Online (AJOL)

    Les importations subventionnees de genisses a haut potentiel laitier : Un echec du a l'absence de politique laitiere globale · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. Hamida Kheffache, Slimane Bedrani ...

  13. SOUS LES PAVÉS: LA PLAGE!

    DEFF Research Database (Denmark)

    Clemmensen, Thomas Juel

    2017-01-01

    kunstnerbevægelse situationisterne brugte parolen sous les pavés: la plage! blev stranden associeret med det frie naturlige rum i kontrast til den brolagte gade, der repræsenterede samfundets undertrykkende orden. Men udtrykket kan samtidig minde os om geologiens allestedsnærværende karakter. Geologien findes lige...

  14. Hybrid LES – Review and assessment

    Indian Academy of Sciences (India)

    brief overview of these techniques and current developments in hybrid LES techniques .... Spalart et al (1997) and Speziale (1998) proposed a new method in which ... over Ahmed Car Reference model (Kapadia et al 2003) and for a flat plate at ..... Allmaras S R 1994 One equation turbulence model for aerodynamics flows.

  15. LES CANCERS DE L'ORBITE

    African Journals Online (AJOL)

    19 déc. 2007 ... té au type histologique permet d'améliorer la survie et la qualité de vie chez les patients atteints de ces tumeurs. Mots-clés ... management of these tumors. Materials ... La durée moyenne d'évolution de la symptomatologie.

  16. Les pauvres et l'information

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le réseau préconise un meilleur accès aux TIC et effectue des recherches sur les politiques et ...... Un site Web a permis à son entreprise de se faire connaître à l'échelle ...... Deep read: tweeting out of poverty », Mail & Guardian, 22 oct.

  17. LES MISSIONS DE PAIX ET LE CANADA

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cambodge : Politique étrangère et missions de paix ...... Cette force constituerait la réserve stratégique du Conseil de sécurité, qui pourrait la ...... le recrutement se faisait par clan, les nouvelles recrues étant placées dans des unités de leurs ...

  18. Les Robertson, CERN's LCG project manager

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    "The LCG will provide a vital test-bed for the new Grid computing technologies that are set to revolutionise the way scientists use the world's computing resources in areas ranging from fundamental research to medical diagnosis," said Les Robertson, CERN's LCG project manager. The Grid is a new method of sharing processing power between computers in centres around the world.

  19. Faut-il brûler les dictionnaires ? Ou comment les ressources numériques ont révolutionné les recherches en morphologie

    Directory of Open Access Journals (Sweden)

    Namer Fiammetta

    2012-07-01

    Full Text Available Pour mener leurs études, les morphologues, et, singulièrement parmi eux, ceux qui traitent du lexique construit, sont pris entre deux tensions : utiliser les données issues des dictionnaires, réputées fiables parce que passées au travers du crible de l’institutionnalisation, ou se fonder sur des données authentiques, produites dans des situations écologiques. Bien qu’inspirant encore de la défiance, le Web devient alors la ressource par excellence. Les ressources numérisées telles que les archives de journaux ou les bases de données de textes littéraires constituent un moyen terme entre ces deux pratiques : elles permettent d’effectuer des recherches basées sur l’usage, tout en offrant la garantie d’une certaine tenue linguistique de la part des scripteurs, la plupart du temps identifiables. Dans cette communication, nous nous demanderons si les dictionnaires méritent la confiance que continuent de leur octroyer les morphologues ou, plus exactement, si une morphologie qui puise ses données dans les seuls dictionnaires peut encore avoir cours au 21e siècle. Pour engager cette discussion, nous commencerons par poser la question de l’existence, pour un lexème construit. Nous exposerons ensuite ce que constitue une morphologie basée sur l’usage, puis donnerons un aperçu des types de recherches que permettent de réaliser les ressources non dictionnairiques. La conclusion sera que, si les dictionnaires continuent d'avoir droit de cité dans la panoplie du morphologue, une morphologie uniquement basée sur les données qu'ils contiennent passerait outre de nombreuses recherches, plus fructueuses les unes que les autres.

  20. Intégrer les sexospécificités dans les politiques macroéconomiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    28 janv. 2011 ... Produit national brut (PNB), investissement, épargne, balance des paiements — voilà les catégories que les macroéconomistes analysent. Mais l'analyse macroéconomique peut-elle être indifférente aux sexospécificités ? Les économistes ont longtemps considéré que les marchés étaient simplement des ...

  1. Les femmes prennent part à la lutte contre les maladies des bovins

    International Development Research Centre (IDRC) Digital Library (Canada)

    améliorer la santé des bêtes et les moyens de subsistance des petits éleveurs. • Des chercheurs du Kenya et du Canada ont recours à des technologies novatrices faisant appel à la biologie moléculaire pour mettre au point un vaccin stable, sûr et efficace que pourront utiliser les petits éleveurs de bovins, hommes comme ...

  2. Recherche sur les stratégies de prévention du VIH chez les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    En Afrique, le VIH a des répercussions dévastatrices sur les jeunes. À l'échelle mondiale, les jeunes de 15 à 24 ans représentent près du tiers des nouvelles infections. La mise en oeuvre de politiques et l'exécution de programmes de prévention du VIH qui conviennent aux adolescents soulèvent des difficultés ...

  3. "Misiru" et les étapes de la vie chez les Valangi de Tanzanie

    OpenAIRE

    Dunham, Margaret

    2006-01-01

    This text ostensibly relates the adventures of Misiru, a young Langi girl. The subtext however appears to describe the historical struggle between the Valangi and the Vaasi for social preeminence.; Tout en relatant les aventures d'une jeune fille, Misiru, ce conte semble faire référence à des événements historiques ayant touché les Valangi, notamment leur lutte contre la domination sociale des Vaasi.

  4. Renforcer les capacités de recherche et d'enseignement dans les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cette activité s'inscrit dans un projet de collaboration à long terme entre les deux universités afin de développer le potentiel de l'University of Limpopo d'être une école des mines de premier ordre dans la région. Le projet cadre avec les efforts du Centre de recherches pour le développement international (CRDI) visant à ...

  5. Le CRDI favorise les partenariats et les met en oeuvre | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    15 déc. 2010 ... Sa collaboration avec le Programme spécial de recherche et de formation concernant les maladies tropicales (TDR) de l'Organisation mondiale de la santé ( OMS ), par exemple, souligne l'importance de l'approche écosanté pour prévenir les maladies transmissibles. Le Forum international écosanté 2008 ...

  6. Jeter des ponts entre les politiques de protection sociale et les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    améliorer la coordination des investissements publics dans les programmes de protection sociale et de développement productif; - faire en sorte que les dépenses publiques favorisent le bien-être de tous; - réduire la dépendance par rapport aux subventions sociales. Il existe peu de données probantes indiquant ce qui ...

  7. Les femmes prennent part à la lutte contre les maladies des bovins ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    6 juin 2016 ... Des chercheurs du Kenya et du Canada sont à mettre au point un nouveau vaccin contre une maladie pulmonaire des bovins et font participer activement des éleveuses de bovins Somalis au processus. Les femmes Somalis jouent un rôle crucial dans l'élevage des bovins, mais ce sont en général les ...

  8. Les Protocoles de routage dans les réseaux mobiles Ad Hoc ...

    African Journals Online (AJOL)

    Dans cet article nous présentons un état de l'art sur les protocoles de routage dans les réseaux mobiles Ad hoc. Mots clés : Réseaux mobiles ad hoc/, Protocoles de routage. Routing protocols in wireless mobile ad hoc networks. Abstract:The communication between users with handheld computers interconnected through ...

  9. Demande de manifestations d'intérêt : Renforcer les centres sur les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... des principaux thèmes liés aux cyberpolitiques; ils doivent également avoir la capacité et la volonté d'intensifier leurs efforts dans les autres domaines. Étant donné la complexité des questions liées aux cyberpolitiques, cette condition exclut les organismes axés exclusivement sur un secteur ou une question stratégique.

  10. Excision : Les jeunes changent l'Afrique par les TIC | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 juil. 2011 ... La société africaine de l'information est en pleine explosion : les technologies de l'information et de la communication (TIC) ne sont plus une ... Pourquoi et comment serait-il pertinent, voire indispensable, de les intégrer dans une vision stratégique de développement citoyen, public, privé et personnel ?

  11. Des broussailles dans les prairies alpines

    Directory of Open Access Journals (Sweden)

    Olivier Camacho

    2009-03-01

    Full Text Available Landscape closing due to the decline in agricultural activity is considered to be a major problem in the Alps. Abondance Valley provides a good example of this phenomenon and is also representative of a paradox commonly found in the Northern French Alps: the mountainsides and alpine pastures are still used, whereas they are becoming increasingly afforested. Environmental conditions play a major role in the localisation of agricultural land uses, but they are not sufficient to explain why pastures still in use are being invaded by shrub. Even if cutting makes it possible to effectively control the encroachment by woody species, this is not true for uncut pastures where grazing is not able to keep up with grass production. This situation is repeated every year and is the likely cause of the colonisation by woody species. To ensure their forage system and to simplify their work, farmers tend to establish grazing units that are oversized in relation to the needs of their animals. They implement compensatory practices that consist of mechanical maintenance as a complement to grazing to limit the dynamics of woody species. These labour-intensive practices are not used on all of the pastures. The analysis of farmers’ practices by agronomists is therefore a useful complement to studies of physical and socio-economic environments, at the level of the grazed field as well as at that of the valley as a whole.La dégradation des paysages par suite du recul de l’activité agricole est considérée comme un enjeu majeur dans les Alpes. La vallée d’Abondance illustre bien ce phénomène de fermeture de l’espace mais elle est en outre représentative d’un paradoxe assez répandu dans les Alpes du nord françaises : les versants et les alpages sont encore exploités et pourtant ils se boisent progressivement. Les conditions de milieux jouent un rôle majeur sur la localisation des usages agricoles de l'espace, mais elles ne peuvent pas suffire pour

  12. 29 CFR 97.32 - Equipment.

    Science.gov (United States)

    2010-07-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  13. 44 CFR 13.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  14. 24 CFR 85.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  15. 41 CFR 105-71.132 - Equipment.

    Science.gov (United States)

    2010-07-01

    .... (4) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be... managing equipment (including replacement equipment), whether acquired in whole or in part with grant funds... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Equipment. 105-71.132...

  16. 43 CFR 12.72 - Equipment.

    Science.gov (United States)

    2010-10-01

    ...) When acquiring replacement equipment, the grantee or subgrantee may use the equipment to be replaced as... equipment (including replacement equipment), whether acquired in whole or in part with grant funds, until... established to ensure the highest possible return. (e) Disposition. When original or replacement equipment...

  17. 1968 Listing of Swimming Pool Equipment.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI. Testing Lab.

    An up-to-date listing of swimming pool equipment including--(1) companies authorized to display the National Sanitation Foundation seal of approval, (2) equipment listed as meeting NSF swimming pool equipment standards relating to diatomite type filters, (3) equipment listed as meeting NSF swimming pool equipment standard relating to sand type…

  18. SANTÉ PUBLIQUE Les troubles de santé font fi des frontières – les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    SANTÉ PUBLIQUE Les troubles de santé font fi des frontières – les connaissances et les solutions devraient elles ... Dangers du tabac et des narguilés pour la santé ... ÉTUDE DE CAS : Nouvelles armes dans la guerre contre le paludisme.

  19. Les mobiles de participation des filles au football et autonomisation ...

    African Journals Online (AJOL)

    Cette étude vise à connaître les mobiles qui conditionnent les filles béninoises à pratiquer le football et à les analyser pour développer l'autonomisation des filles en rapport avec les défis du millénaire. Pour ce faire 108 joueuses, dont la moyenne d'âge est de 17 ans, réparties dans 9 équipes parmi les 17 équipes que ...

  20. Le contentieux camerounais devant les instances sportives internationales

    Directory of Open Access Journals (Sweden)

    Dikoume François Claude

    2016-01-01

    Les acteurs du sport depuis lors, utilisent donc les voies de recours au niveau international soit vers les fédérations sportives internationales ou encore et surtout vers le TAS qui s'occupe des litiges de toutes les disciplines sportives. Il est question ici de faire un inventaire casuistique descriptif non exhaustif des requêtes contentieuses camerounaises portées devant les diverses instances sportives internationales ; ceci permettra de questionner l'esprit processuel et la qualité technique de leurs réclamations juridiques en matière sportive.

  1. egypt : tous les projets | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Améliorer les perspectives et les moyens de subsistance pour les communautés marginalisées en Égypte grâce à l'utilisation d'outils numériques ... les institutions religieuses étatiques et les médias publics, et d'évaluer la mesure dans laquelle elles donnent suite aux demandes de réforme formulées dans la foulée du ...

  2. Performance monitoring of safeguards equipment

    International Nuclear Information System (INIS)

    Sirisena, K.; Peltoranta, M.; Goussarov, V.; Vodrazka, P.

    1999-01-01

    SGTCS is responsible for monitoring and reporting the performance of the SG equipment. Performance monitoring (PM) has been implemented in most important safeguards equipment operating unattended in nuclear facilities. Inspectors acquire equipment performance data in facilities. After inspection, the data package is submitted to SGTCS for processing and analysis. The performance data is used for identification of systems or components, which should be changed in the field and for identification of modules which, should be diagnosed at HQ in order to determine the cause of failure. Moreover, the performance data is used for preventive maintenance and spares distribution planning, and to provide statistics for official reports and management decision making. An important part of the performance monitoring is reporting. Equipment performance reports contain information about equipment inventory, utilization, failure types, failure distribution, and reliability. Trends in performance are given in graphical form in cases, where past data is available. Reliability estimates such as expected times between failures are provided. The automated reporting tools are obtainable through EMIS database application. (author)

  3. AVM branch vibration test equipment

    International Nuclear Information System (INIS)

    Anne, J.P.

    1995-01-01

    An inventory of the test equipment of the AVM Branch ''Acoustic and Vibratory Mechanics Analysis Methods'' group has been undertaken. The purpose of this inventory is to enable better acquaintance with the technical characteristics of the equipment, providing an accurate definition of their functionalities, ad to inform potential users of the possibilities and equipment available in this field. The report first summarizes the various experimental surveys conduced. Then, using the AVM equipment database to draw up an exhaustive list of available equipment, it provides a full-scope picture of the vibration measurement systems (sensors, conditioners and exciters) and data processing resources commonly used on industrial sites and in laboratories. A definition is also given of a mobile test unit, called 'shelter', and a test bench used for the testing and performance rating of the experimental analysis methods developed by the group. The report concludes with a description of two fixed installations: - the calibration bench ensuring the requisite quality level for the vibration measurement systems ; - the training bench, whereby know-how acquired in the field in the field of measurement and experimental analysis processes is made available to others. (author). 27 refs., 15 figs., 2 appends

  4. Les écueils du double jeu

    Directory of Open Access Journals (Sweden)

    Séverin Muller

    2007-06-01

    Full Text Available À partir d’une expérience d’observation participante qui a consisté à travailler comme ouvrier puis à intégrer les bureaux de la direction dans un abattoir industriel, l’auteur étudie les effets cognitifs de la transgression d’un ordre établi dans l’entreprise : les ouvriers avec les ouvriers et les cadres avec les cadres. Les situations décrites de rupture avec les usages du milieu permettent de réfléchir aux façons d’être identifié selon les circonstances, aux formes d’instrumentalisation du chercheur sur son terrain, aux manières dont la confiance s’acquiert se maintient ou se perd dans un environnement conflictuel (selon quels critères propres à chaque groupe sommes nous acceptés, cooptés ou exclus ?. Finalement, la démarche transversale et le jeu transgressif qu’elle suggère participent à l’apprentissage des systèmes de référence non partagés au sein d’une même organisation.Starting from an experiment of participating observation which consisted in working as worker then to integrate the offices of the direction in an industrial slaughterhouse, the author studies the cognitive effects of the transgression of an order established in the company: workers with the workers and managers with the managers. The described situations of rupture with the uses of the social sphere make it possible to think of the ways of being identified according to circumstances, the shapes of « instrumentalisation » of the researcher on his field, with the ways in which confidence is acquired, is maintained or lost in a conflict environment (according to which specific criteria to each group are us accepted, co-opted or excluded?. Finally, the transverse way and the transgressive play that it suggests take part in the training of the systems of reference not shared in the same organization.A partir de un experimento de observación participante que consistió en trabajar como obrero antes de integrar las

  5. 78 FR 25916 - Authorization of Radiofrequency Equipment

    Science.gov (United States)

    2013-05-03

    ...] Authorization of Radiofrequency Equipment AGENCY: Federal Communications Commission. ACTION: Proposed rule... bodies, and measurement procedures used to determine RF equipment compliance. The Commission believes... Commission is responsible for an equipment authorization program for radiofrequency (RF) devices under part 2...

  6. Les évolutions de la norme électrique

    CERN Document Server

    Gallauziaux, Thierry

    2014-01-01

    Découvrez pièce par pièce les évolutions de la norme électrique (NF C 15-100 applicable depuis le 1er juin 2003), et les équipements minimaux requis : nombre de socles de prises de courant, emplacement des points d'éclairages, prises de communication... Sachez choisir les nouveaux dispositifs de protection des circuits, désormais obligatoires : les interrupteurs différentiels de type A, les dispositifs de coupure du fil pilote des chauffages électriques, le parafoudre... Ce qu'il faut savoir sur les nouvelles prises téléphoniques et le réseau de communication domestique pour accueillir les nouveaux services multimédias et de communication (téléphonie, TV, Internet...).

  7. Study relating to the physico-chemical behaviour of heavy water in nuclear reactors; Etudes relatives au comportement physico-chimique de l'eau lourde dans les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Chenouard, J; Dirian, G; Roth, E; Vignet, P; Platzer, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1959-07-01

    Chemical and isotope pollution, and radiolytic decomposition are the two most important ways in which heavy water becomes degraded in nuclear reactors. Chemical pollution has led to the creation of ion exchange purification loops specially designed for reactors: the report contains a description in detail of the application of this purification method in CEA research reactors, including the analysis required, results obtained, and their interpretation. The intelligence obtained on radiolytic decomposition with the same facilities is also discussed, as well as the recombination apparatus and control equipment utilized. Finally, investigation to date in the CEA on recombination circuits for power reactors is also discussed. (author) [French] Parmi les degradations subies par l'eau lourde dans les reacteurs nucleaires, les deux plus importantes sont la pollution chimique et isotopique et la decomposition radiolytique. La pollution chimique a conduit a mettre au point pour le cas particulier des reacteurs, des circuits d'epuration par echange d'ions. On decrit ici en detail la mise en oeuvre de cette methode dans les reacteurs de recherche du CEA; les controles qu'elle necessite, les resultats obtenus et leur interpretation. En ce qui concerne la dissociation radiolytique de l'eau, les renseignements obtenus sur ces memes reacteurs sont communiques, ainsi que les details des dispositifs de recombinaison et des moyens de controle. Enfin, on fait le point des etudes poursuivies au CEA sur ces memes problemes de recombinaison dans le cas des reacteurs de puissance. (auteur)

  8. Study relating to the physico-chemical behaviour of heavy water in nuclear reactors; Etudes relatives au comportement physico-chimique de l'eau lourde dans les reacteurs nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Chenouard, J.; Dirian, G.; Roth, E.; Vignet, P.; Platzer, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1959-07-01

    Chemical and isotope pollution, and radiolytic decomposition are the two most important ways in which heavy water becomes degraded in nuclear reactors. Chemical pollution has led to the creation of ion exchange purification loops specially designed for reactors: the report contains a description in detail of the application of this purification method in CEA research reactors, including the analysis required, results obtained, and their interpretation. The intelligence obtained on radiolytic decomposition with the same facilities is also discussed, as well as the recombination apparatus and control equipment utilized. Finally, investigation to date in the CEA on recombination circuits for power reactors is also discussed. (author) [French] Parmi les degradations subies par l'eau lourde dans les reacteurs nucleaires, les deux plus importantes sont la pollution chimique et isotopique et la decomposition radiolytique. La pollution chimique a conduit a mettre au point pour le cas particulier des reacteurs, des circuits d'epuration par echange d'ions. On decrit ici en detail la mise en oeuvre de cette methode dans les reacteurs de recherche du CEA; les controles qu'elle necessite, les resultats obtenus et leur interpretation. En ce qui concerne la dissociation radiolytique de l'eau, les renseignements obtenus sur ces memes reacteurs sont communiques, ainsi que les details des dispositifs de recombinaison et des moyens de controle. Enfin, on fait le point des etudes poursuivies au CEA sur ces memes problemes de recombinaison dans le cas des reacteurs de puissance. (auteur)

  9. L'INNOVATION DANS LES SERVICES : DES MODALITÉS ORIGINALES, QUI PEUVENT ENRICHIR LES CONCEPTIONS INDUSTRIELLES

    OpenAIRE

    Gadrey , Jean; Gallouj , Faïz; Weinstein , Olivier

    1995-01-01

    International audience; Bien qu'ils soient largement majoritaires dans les grands agrégats économiques, les théories économiques de l'innovation tendent à négliger les services ou à considérer que l'innovation y est pour l'essentiel réduite à l'adoption d'innovations produites dans l'industrie. Dans cette contribution, on conteste ces points de vue en examinant les trois questions suivantes -pourquoi l'innovation dans les services est-elle méconnue ou oubliée par ces théories? -quelles sont (...

  10. Les dimensions émotionnelles du terrorisme

    Directory of Open Access Journals (Sweden)

    Benjamin Ducol

    2013-10-01

    Full Text Available Par une volonté louable de rompre avec des approches psychologisantes du phénomène terroriste dominantes au cours des années 1960-70, les recherches contemporaines en matière de terrorisme(s et de violence(s politique(s ont très largement mis l’emphase sur la figure du « terroriste » comme acteur rationnel et stratégique. Face aux limites des approches rationalistes de l’engagement radical qui envisagent de manière réductionniste les individus au travers d’un calcul rationnel univoque en terme de coûts et d’incitatifs à l’action, il nous apparaît important de réintégrer dans les réflexions théoriques sur les phénomènes terroristes, les émotions afin d’en interroger le rôle dans la production d’une trajectoire violente. Le présent article entend proposer à cet égard un bilan critique des travaux universitaires actuels autour de l’engagement terroriste et une réflexion théorique mettant en lumière les contours d’un futur agenda de recherche accordant une place plus importante aux ressorts émotionnels de la violence politique clandestine. Contemporary research on terrorism(s and political violence(s have largely put the emphasis on the figure of the "terrorist" as rational and strategic player, in a break with psychoanalytical approaches to terrorism that were dominant from the 1960-1970’s. Given the limitations of rationalist approaches to radical commitment, and considering how reductionist is the understanding of individual participation to terrorism related activities through a rational calculation framework in terms of costs and incentives to action, it is important to reintegrate in the theoretical reflections on terrorist phenomena how emotions can play a role in leading potential terrorists down a violent path. This paper presents a critical assessment of current academic work surrounding the issue of violent radicalization and involvement in terrorism, and engages in a theoretical debate

  11. Another donation of computer equipment

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On Thursday 27 February, CERN was pleased to donate computer equipment to a physics institute in the Philippines.   H.E. Leslie J. Baja and Rolf Heuer. Following donations of computer equipment to institutes in Morocco, Ghana, Bulgaria, Serbia and Egypt, CERN is to send 50 servers and 4 network switches to the National Institute of Physics at the University of the Philippines Diliman. CERN’s Director-General Rolf Heuer and the Ambassador of the Philippines to Switzerland and Lichtenstein, H.E. Leslie J. Baja, spoke of their enthusiasm for the project during an official ceremony. The equipment will be used for various high energy physics research programmes in the Philippines and for the University’s development of digital resources for science.

  12. OGM Diffusion des OGM et impact pour les agriculteurs : quels sont les liens ?

    Directory of Open Access Journals (Sweden)

    Lemarie Stéphane

    2001-05-01

    Full Text Available Les OGM actuellement sur le marché présentent des innovations sur des fonctions de protection des plantes. Selon les problèmes de protection des plantes, les gains des agriculteurs liés à l’adoption des OGM sont très variables. Cette hétérogénéité pose d’importants problèmes méthodologiques pour pouvoir estimer correctement la distribution des gains pour l’ensemble des agriculteurs. Une synthèse de plusieurs études américaines est réalisée ici et met bien en évidence la diversité des méthodes utilisées, chacune d’elles présentant ses avantages et ses limites. Globalement, si la diffusion des OGM est un fait indéniable, les études ne permettent pas de tirer des conclusions aussi nettes quant à l’impact des OGM pour tous les agriculteurs qui adoptent ces produits, et cela en particulier pour le soja. Cette absence de conclusion s’explique en grande partie par la difficulté à mesurer certains facteurs qui influencent le comportement d’adoption, comme par exemple la simplification de la conduite des cultures. En contrepartie, il faut noter que les études présentées ici ne prennent pas en compte un certain nombre d’effets indirects qui peuvent faire diminuer les gains des agriculteurs.

  13. Waste Electrical and Electronic Equipment

    DEFF Research Database (Denmark)

    Bigum, Marianne Kristine Kjærgaard; Christensen, Thomas Højlund

    2011-01-01

    Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans and the env......Waste electrical and electronic equipment (WEEE) is one of the fastest growing special waste types with an estimated growth of 3–5% per year (Cui and Forssberg, 2003). WEEE is a very heterogeneous waste type that contains many compounds that are considered to be harmful to both humans...

  14. The development of superconducting equipment

    CERN Document Server

    Ueda, T; Hiue, H

    2003-01-01

    Fuji Electric has been developing various types of superconducting equipment for over a quarter of a century. This paper describes the development results achieved for superconducting equipment and especially focuses on large-capacity current leads and superconducting transmission systems, the development of which is being promoted for application to the field of nuclear fusion. High temperature superconductor (HTS) is becoming the mainstream in the field of superconductivity, and the HTS floating coil and conduction-cooled HTS transformed are also introduced as recent developments for devices that utilize this technology. (author)

  15. Mechanical (turbines and auxiliary equipment)

    CERN Document Server

    Sherry, A; Cruddace, AE

    2013-01-01

    Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attenti

  16. Multi-residue determination of the sorption of illicit drugs and pharmaceuticals to wastewater suspended particulate matter using pressurised liquid extraction, solid phase extraction and liquid chromatography coupled with tandem mass spectrometry.

    Science.gov (United States)

    Baker, David R; Kasprzyk-Hordern, Barbara

    2011-11-04

    Presented is the first comprehensive study of drugs of abuse on suspended particulate matter (SPM) in wastewater. Analysis of SPM is crucial to prevent the under-reporting of the levels of analyte that may be present in wastewater. Analytical methods to date analyse the aqueous part of wastewater samples only, removing SPM through the use of filtration or centrifugation. The development of an analytical method to determine 60 compounds on SPM using a combination of pressurised liquid extraction, solid phase extraction and liquid chromatography coupled with tandem mass spectrometry (PLE-SPE-LC-MS/MS) is reported. The range of compounds monitored included stimulants, opioid and morphine derivatives, benzodiazepines, antidepressants, dissociative anaesthetics, drug precursors, and their metabolites. The method was successfully validated (parameters studied: linearity and range, recovery, accuracy, reproducibility, repeatability, matrix effects, and limits of detection and quantification). The developed methodology was applied to SPM samples collected at three wastewater treatment plants in the UK. The average proportion of analyte on SPM as opposed to in the aqueous phase was 10% with regard to methadone, EDDP, EMDP, BZP, fentanyl, nortramadol, norpropoxyphene, sildenafil and all antidepressants (dosulepin, amitriptyline, nortriptyline, fluoxetine and norfluoxetine). Consequently, the lack of SPM analysis in wastewater sampling protocol could lead to the under-reporting of the measured concentration of some compounds. Copyright © 2011 Elsevier B.V. All rights reserved.

  17. Modèles types de lettres et courriers électroniques

    CERN Document Server

    Fayet, Michelle

    2008-01-01

    Bien rédiger les lettres et mails professionnels renforce l'image de qualité de votre entreprise. La 2e édition de ce livre vous offre les clés essentielles pour améliorer la rédaction de votre courrier professionnel et vous propose, par le CD-Rom joint, des modèles de lettres et e-mails directement utilisables. Ils couvrent les situations les plus courantes rencontrées quotidiennement dans une entreprise : les demandes de renseignements, les commandes, les livraisons, les facturations, le recrutement, la gestion du personnel, les échanges avec les partenaires, les banques, les administrations. Indispensable pour rédiger des courriers efficaces, ce guide est un outil de travail incontournable pour tous salariés en charge de la rédaction du courrier, et particulièrement pour les secrétaires et assistantes.

  18. Les faïences patronymiques

    Directory of Open Access Journals (Sweden)

    Jean Rosen

    2006-09-01

    Full Text Available Les faïences patronymiques, collection Jeanne Lemerle - Donation Michel Dillange,J. Rosen (dir., D. Donadieu-Rigaut, J.-M. Roudier, S. Biton, A. Supiot,Le Mans, éd. de la Reinette, 2006, 158 p.A la suite d’une récente donation, le Musée de l’Abbaye Sainte-Croix des Sables-d’Olonne présente un exceptionnel ensemble de cent soixante-cinq faïences patronymiques nivernaises rassemblé dans les années 1930-1940, ensemble très complet produit des environs de 1730 aux années 1830, qui constitue un p...

  19. Santa Magdalena de les Tragines Altarpiece. Epilogue

    Directory of Open Access Journals (Sweden)

    Riu de Martín, M. Carme

    2007-06-01

    Full Text Available

    This is a work review of the article published in “Anuario de Estudios Medievales” 36/1 (2006, pp. 355-284. After the restoration of the pieces one has obtained new data about their iconography and their image’s symbolism.



    Revisió del treball que amb el mateix títol es va publicar a la revista “Anuario de Estudios Medievales”, 36/1 (2006, pp. 355-384. La restauració de les peces estudiades ha permès obtenir nous resultats sobre la iconografia i el sentit simbòlic de les imatges plasmades a l’esmentat retaule

  20. Sur les intermédia

    OpenAIRE

    Higgins, Dick

    2017-01-01

    I. Dans “Intermedia”, Higgins introduit deux substantifs : intermedium et son pluriel intermedia. L'auteur commence par noter les changements sociaux frappant son époque, qui passe d’une société divisée, de castes, à une société égalitaire sans classe. À son sens, l'irruption, dans la sphère de l'art, d’œuvres inclassables, venant se loger entre les médiums établis, participe du même esprit. Il appelle ces œuvres hybrides des « intermédia ». Elles peuvent être à la croisée de différents médiu...

  1. Pour en finir avec les libertins

    Directory of Open Access Journals (Sweden)

    Alain Mothu

    2010-09-01

    Full Text Available Le « libertinage » et les « libertins », notamment « érudits » ou savants, occupent une place de choix dans la production savante actuelle sur la littérature et la culture du xviie siècle. Livres, articles, éditions de textes, anthologies à leur sujet paraissent en grand nombre, y compris dans la prestigieuse « Bibliothèque de la Pléiade » ; ils font l’objet de thèses universitaires, de colloques et de séminaires ; on les trouve même à l’agrégation de Lettres et une revue spécialisée leur est...

  2. Les hybridations interspecifiques dans le genre Phaseolus ...

    African Journals Online (AJOL)

    La réussite de l'introgression de caractères utiles chez le haricot commun P. vulgaris à partir des deux espèces P. coccineus et P. polyanthus dépend en partie des génotypes utilisés. Ce travail vise à identifier des génotypes de Phaseolus compatibles lors des hybridations interspécifiques et à identifier les hybrides issus ...

  3. DLHA: Dark Matter Les Houches Agreement

    International Nuclear Information System (INIS)

    Balazs, C.; Cerdeno, D.G.; Leane, R.; Kakizaki, M.; Kraml, S.; Savage, C.; Scott, P.; Sekmen, S.

    2012-01-01

    This work presents a set of conventions and numerical structures that aim to provide a universal interface between computer programs calculating dark matter related observables. It specifies input and output parameters for the calculation of observables such as abundance, direct and various indirect detection rates. These parameters range from cosmological to astrophysical to nuclear observables. The present conventions lay the foundations for defining a future Les Houches Dark Matter Accord. (authors)

  4. Les sens du musée

    Directory of Open Access Journals (Sweden)

    Laurent Grison

    1999-09-01

    Full Text Available Cet article, fondé sur l'exemple de la National Gallery de Londres, porte sur l'intégration dans le cadre urbain, l'aménagement et les dynamiques spatiales du lieu muséal. Sur le même thème, nous relatons un exercice réalisé avec des lycéens.

  5. LES of flow in the street canyon

    Science.gov (United States)

    Fuka, Vladimír; Brechler, Josef

    2012-04-01

    Results of computer simulation of flow over a series of street canyons are presented in this paper. The setup is adapted from an experimental study by [4] with two different shapes of buildings. The problem is simulated by an LES model CLMM (Charles University Large Eddy Microscale Model) and results are analysed using proper orthogonal decomposition and spectral analysis. The results in the channel (layout from the experiment) are compared with results with a free top boundary.

  6. Les Gammaridae (Crustaces, Amphipodes) du Massif Central

    NARCIS (Netherlands)

    Goedmakers, Annemarie

    1974-01-01

    Une prospection systématique des eaux courantes du Massif Central a permis de reconnaître le nombre d’espèces des Gammaridés présentes dans cette région. On a trouvé les espèces suivantes: Gammarus pulex (Linnaeus, 1758), G. fossarum Koch, 1835, et G. ibericus Margalef, 1951. G. ibericus, espèce

  7. ASTHME INFANTILE: Les facteurs de risque modifiables ...

    African Journals Online (AJOL)

    significative entre les enfants nourris au lait maternel exclusif jusqu'à l'âge de 4 mois et leurs pairs mis sous alimentation mixte pour ce qui ... Data on environmental risk factors such as exposition to tobacco smoking, type of fuel used for cooking, type of floor in the house and ... 2Ministère de la Santé Publique du Cameroun.

  8. LES GOITRES BÉNINS EN ORL

    African Journals Online (AJOL)

    18 juin 2007 ... Montury S., de Clermont H, Gatina J.H. Prévalence des cancers thyroïdiennes à la Réunion à partir des données scinti- graphiques. Bull Patho Exot, 1997. 9. Moumen M, Touhami M, Elaoui M.E, Fares F.El. Les micro-carcinomes thyroïdiens. Médecine du Maghreb, 1992, 31 :25-28. 10. Ntyonga-Pono M.P.

  9. Les microémulsions Microemulsions

    Directory of Open Access Journals (Sweden)

    Bavière M.

    2006-11-01

    Full Text Available Depuis une quinzaine d'années, les microémulsions intéressent l'industrie pétrolière, en effet, leur miscibilité apparente avec l'eau et les hydrocarbures, jointe à des propriétés originales de stabilité et de viscosité, en fait des fluides de drainage de l'huile, même résiduelle, extrêmement efficaces, leur emploi est également recommandé pour la stimulation des puits d'injection ou de production. La présente étude bibliographique s'applique à situer d'abord les microémulsions dans le contexte des solutions micellaires, puis à présenter les théories qui expliquent leur formation, leur structure et leurs propriétés, et enfin à décrire le procédé de récupération du pétrole tel qu'il a été étudié au laboratoire, et mis en oeuvre sur champ pendant la dernière décennie. In the last fifteen years, the petroleum industry has become interested in microemulsions. Their apparent miscibility with water and hydrocarbons as well as their original properties of stability and viscosity make them extremely effective oil drainage fluids, even for residual oil. They are also recommended for stimulating injection or production wells. This bibliographic survey attempts first to situate microemulsions with in the context of micellar solutions and then to review theories explaining their formation, structure and properties. lastly, a description is given of an oil recovery process that has been laboratory researched and applied in the field during the last decade.

  10. Qui gouverne les industries ?

    Directory of Open Access Journals (Sweden)

    William Genieys

    2010-07-01

    Full Text Available La question de savoir qui gouverne l’économie a longtemps fasciné les sciences sociales sans pour autant souvent générer de résultats probants et rigoureux. Bernard Jouve a tenté d’y répondre en se focalisant sur l’élite de chacune des métropoles qu’il a étudiée. Ce texte prolonge son travail en changeant de focale pour aborder plutôt les élites qui régulent chaque industrie en présentant leur «  programme » respectif. Après avoir exposé les développements théoriques menant à ce concept « d’élite programmatique », l’article les croise avec une approche du gouvernement des industries afin de tracer une nouvelle voie vers une meilleure compréhension du rôle du politique dans l’économie.The question «who governs the economy ?» has fascinated social science for years without often generating stimulating and rigorous results. Bernard Jouve attempted to reply to it by focusing on the elite of each metropole he studied. This text extends his work by changing the focus in order to study the elites who regulate each industry through promoting their respective «programme». Having first presented the theoretical developments that produced the concept of «programmatic elite», the article combines it with an approach to the government of industries in order to set out a new route map towards better understanding of the role of politics in the economy.

  11. Flux des polluants liés aux activités anthropiques, risques sur les ...

    African Journals Online (AJOL)

    Les activités anthropiques interfèrent sur les eaux de surface en créant des problèmes environnementaux et sanitaires. Les activités domestiques, agricoles, industrielles, hospitalières, et les activités de pêche artisanale et de tourisme, sont les plus incriminées. La pollution des eaux de surface par les métaux lourds, les ...

  12. Les formes de la séparation dans les Lettres Persanes

    Directory of Open Access Journals (Sweden)

    Thaïs Chauvel

    2017-12-01

    Full Text Available Cet article aborde la thématique de la séparation dans le dispositif romanesque des Lettres persanes, de Montesquieu, à savoir, le roman du sérail. De ce fait, cette étude entend analyser les formes de la séparation qui apparaissent dans les lettres des trois personnages membres du sérail: les femmes, leur mari Usbek, ainsi que les gardiens eunuques. En premier lieu, il importe de comprendre dans quelle mesure la forme épistolaire des Lettres persanes implique la séparation. Par la suite, on analysera d’abord la réaction des épouses face au départ de leur mari dans les lettres III et VII. Puis, on verra en quoi l’exil d’Usbek, contraint à quitter la Perse, constitue une séparation et comment celle-ci finit par le rapprocher de ses eunuques. Enfin, on se penchera de façon plus approfondie sur la figure de l’eunuque, esclave dont on a amputé le sexe et qui semble ainsi incarner le mieux l’aliénation.

  13. Quines empreses han aguantat millor la crisi, les empreses familiars o les no familiars?

    Directory of Open Access Journals (Sweden)

    Jose Luis Gallizo

    2014-12-01

    Full Text Available Objecte: En aquest estudi és porta a terme un anàlisi comparatiu sobre l’evolució de l’estructura econòmica i financera que presenten les empreses familiars i no familiars de Catalunya en un context d’intensa crisi econòmica. La seva finalitat és poder donar resposta a dos qüestions principals: identificar les característiques diferencials de l’EF respecte a l’EnF i comprovar si aquestes característiques diferencials han permès a les EF aguantar millor la crisi econòmica. Disseny/metodologia: S’ha analitzat una mostra de 750 grans i mitjanes empreses de Catalunya (550 familiars i 200 no familiars durant el període 2008-2012. Les dades s’han obtingut a través de la base de dades SABI, i per a la classificació de les empreses en familiars i no familiars s’ha dut a terme una comprovació individual de cadascuna d’elles per evitar habituals errors de classificació. Posteriorment les empreses s’han classificat en funció de la seva dimensió per dotar d’una major robustes els resultats. També s’ha procurat que la distribució d’empreses per sectors fos similar en les diferents categories per evitar que un efecte sectorial pogués tergiversar els resultats de l’estudi. Aportacions i resultats: L’estudi ha permès constatar les hipòtesis establertes sobre el finançament de les empreses familiars i concloure que aquestes presenten una estructura financera diferent a les Empreses no familiars. Les empreses familiars als seus balanços, presenten un major nivell d’autofinançament gràcies a la seva menor distribució de dividends. A més a més, les EF presenten millors resultats en quant a nivells de cobertura i liquiditat, ja que es troben més capitalitzades i presenten uns nivells d’endeutament inferior que les Empreses no familiars. Aquestes característiques patrimonials i financeres han contribuït a que les empreses familiars aguantin millor els anys de crisi, produint-se durant aquests anys

  14. Les noms en -ance : un panorama

    Directory of Open Access Journals (Sweden)

    Knittel Marie Laurence

    2016-01-01

    Full Text Available Ce travail examine les noms terminés par la forme ance (dorénavant Nance construits sur des bases verbales (appartenance, adjectivales (élégance, ou relevant potentiellement de ces deux catégories (méfiance. Nous nous intéressons aux propriétés des Nance eux-mêmes, en particulier leurs spécificités syntaxiques et sémantiques. En tant que noms déverbaux, ils sont susceptibles de décrire des évenances et de posséder une structure argumentale similaire à celle du verbe de base ; en tant que noms désadjectivaux, la dénotation prioritairement attendue est celle de propriété. Nous soulevons la question de l’analyse des formes apparentées à la fois à un verbe et à un adjectif, afin de déterminer quelle est la base effective de la forme nominale, ou bien s’il existe deux Nance formellement identiques, l’un déverbal, l’autre désadjectival. Enfin, nous examinons la relation entre les Nance déverbaux et les participes présents, formellement proches.

  15. Damage limits of accelerator equipment

    CERN Document Server

    Rosell, Gemma

    2014-01-01

    Beam losses occur in particle accelerators for various reasons. The effect of lost particles on accelerator equipment becomes more severe with the increasing energies and intensities. The present study is focused on the damage potential of the proton beam as a function of particle energy and beam size. Injection and extraction energies of different accelerators at CERN were considered.

  16. Pocket dictionary of laboratory equipment

    International Nuclear Information System (INIS)

    Junge, H.D.

    1987-01-01

    This pocket dictionary contains the 2500 most common terms for scientific and technical equipment in chemical laboratories. It is a useful tool for those who are used to communicating in German and English, but have to learn the special terminology in this field. (orig.) [de

  17. Using Gaming Equipment to Teach

    Science.gov (United States)

    Curriculum Review, 2009

    2009-01-01

    Gaming equipment (such as Nintendo's Wii[TM]) is making its way to schools and classrooms. However, most of the discussion regarding how to use this technology and integrate it into lesson plans is happening in blogs on the Internet. An advocate of interactive media in the classroom, Dr. Dawn Hawkins, a faculty member for the Art Institute of…

  18. Isotope-equipped measuring instruments

    International Nuclear Information System (INIS)

    Miyagawa, Kazuo; Amano, Hiroshi

    1980-01-01

    In the steel industry, though the investment in isotope-equipped measuring instruments is small as compared with that in machinery, they play important role in the moisture measurement in sintering and blast furnaces, the thickness measurement in rolling process and others in automatic control systems. The economic aspect of the isotope-equipped measuring instruments is described on the basis of the practices in Kimitsu Works of Nippon Steel Corporation: distribution of such instruments, evaluation of economic effects, usefulness evaluation in view of raising the accuracy, and usefulness evaluation viewed from the failure of the isotope instruments. The evaluation of economic effects was made under the premise that the isotope-equipped measuring instruments are not employed. Then, the effects of raising the accuracy are evaluated for a γ-ray plate thickness gauge and a neutron moisture gauge for coke in a blast furnace. Finally, the usefulness was evaluated, assuming possible failure of the isotope-equipped measuring instruments. (J.P.N.)

  19. Hydraulic turbines and auxiliary equipment

    Energy Technology Data Exchange (ETDEWEB)

    Luo Gaorong [Organization of the United Nations, Beijing (China). International Centre of Small Hydroelectric Power Plants

    1995-07-01

    This document presents a general overview on hydraulic turbines and auxiliary equipment, emphasizing the turbine classification, in accordance with the different types of turbines, standard turbine series in China, turbine selection based on the basic data required for the preliminary design, general hill model curves, chart of turbine series and the arrangement of application for hydraulic turbines, hydraulic turbine testing, and speed regulating device.

  20. Cultures et politiques dans les Alpes contemporaines

    Directory of Open Access Journals (Sweden)

    Bernard Debarbieux

    2009-03-01

    Full Text Available Plus que jamais, l’espace alpin est marqué par le déploiement de flux toujours plus variés, toujours plus puissants, et symétriquement par la multiplication d’initiatives destinées à conforter ou à régénérer l’idée de localité. Quelles spatialités et quelles territorialités travaillent les populations alpines aujourd’hui ? Quelles sont les figures contemporaines de la circulation et des flux, et les figures complémentaires de l’ancrage et de la refondation territoriale ? Voici les questions que cet essai se propose de développer. Ce texte reprend le contenu d’une conférence donnée dans le cadre de la célébration du centenaire de l’Institut de Géographie Alpine. Cette conférence, comme les autres données à cette occasion, avait adopté une forme libre dressant un bilan et des perspectives de la situation alpine. La trace écrite adoptée ici prend alors logiquement la forme d’un essai.More than ever before, the Alps are affected by increasingly varied and powerful flows and equally by the multiplication of initiatives designed to strengthen or regenerate the idea of “locality” (place. What spatialities and what territorialities activate the populations of the Alps today? What are the contemporary figures relating to circulation and flows and the complementary figures concerning spatial “anchoring” or fixity and new territorial foundations? These are the questions that this essay, proposes to develop. This text takes another look at the subject of a lecture given as part of celebrations to mark the centenary of the Institut de Géographie Alpine. This lecture, like the others given on this occasion, adopted a free format, presenting a report on the current situation in the Alps and prospects for the future. The written format adopted here logically takes the form of an essay. Readers looking for detailed illustrations and references are referred to three scientific articles published by the same

  1. Les erreurs des étudiants slovènes dans les productions écrites

    Directory of Open Access Journals (Sweden)

    Nataša Žugelj

    2007-12-01

    Full Text Available Jusqu'aux anneés 70 du X.Xe siècle, les enseignants avaient tendance à évacuer au maximum l'erreur et àne pas mettre l'élève en situation d'échec. Ainsi, le linguiste Corder (1976 et les béhavioristes défendaient l'idée qu'une bonne méthode doit conduire à un apprentissage sans erreur. Si les erreurs se produisent, c'est que la méthode n'est pas correctement conçue, OU bien que des circonstances particulières liées àl'élève (inattention,  fatigue,  stress... conduisent à une  performance imparfaite.

  2. La digestion chez les camélidés ; comparaison avec les ruminants

    OpenAIRE

    Jouany, J Pierre

    2000-01-01

    Les études sur la digestion et le métabolisme des camélidés ont bénéficié au cours des quinze dernières années des progrès techniques et méthodologiques issus des travaux conduits chez les ruminants. On dispose aujourd’hui d’éléments scientifiques fiables qui permettent de comparer les aptitudes digestives et métaboliques respectives de ces deux types d’animaux. L’anatomie des pré-estomacs ainsi que le comportement alimentaire des animaux sont très différents entre camélidés et ruminants. De ...

  3. Alternative Fuels Data Center: Biodiesel Equipment Options

    Science.gov (United States)

    Equipment Options to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Equipment Options on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Equipment Options on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Equipment Options on Google Bookmark Alternative Fuels

  4. 40 CFR 792.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Equipment design. 792.61 Section 792.61...) GOOD LABORATORY PRACTICE STANDARDS Equipment § 792.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall be...

  5. 40 CFR 160.61 - Equipment design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Equipment design. 160.61 Section 160... LABORATORY PRACTICE STANDARDS Equipment § 160.61 Equipment design. Equipment used in the generation... appropriate design and adequate capacity to function according to the protocol and shall be suitably located...

  6. 21 CFR 58.61 - Equipment design.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Equipment design. 58.61 Section 58.61 Food and... PRACTICE FOR NONCLINICAL LABORATORY STUDIES Equipment § 58.61 Equipment design. Equipment used in the... of appropriate design and adequate capacity to function according to the protocol and shall be...

  7. 34 CFR 74.34 - Equipment.

    Science.gov (United States)

    2010-07-01

    ... as program income. (e) When acquiring replacement equipment, the recipient may use the equipment to... replacement equipment subject to the approval of the Secretary. (f) The recipient's property management... 34 Education 1 2010-07-01 2010-07-01 false Equipment. 74.34 Section 74.34 Education Office of the...

  8. 20 CFR 437.32 - Equipment.

    Science.gov (United States)

    2010-04-01

    ... contemplated by Federal statute. (4) When acquiring replacement equipment, the grantee or subgrantee may use.... Procedures for managing equipment (including replacement equipment), whether acquired in whole or in part... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Equipment. 437.32 Section 437.32 Employees...

  9. 45 CFR 2541.320 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... replacement equipment, the grantee or subgrantee may use the equipment to be replaced as a trade-in or sell... replacement equipment), whether acquired in whole or in part with grant funds, until disposition takes place... ensure the highest possible return. (e) Disposition. When original or replacement equipment acquired...

  10. 45 CFR 1174.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... contemplated by Federal statute. (4) When acquiring replacement equipment, the grantee or subgrantee may use... requirements. Procedures for managing equipment (including replacement equipment), whether acquired in whole or... original or replacement equipment acquired under a grant or subgrant is no longer needed for the original...

  11. 45 CFR 1157.32 - Equipment.

    Science.gov (United States)

    2010-10-01

    ... contemplated by Federal statute. (4) When acquiring replacement equipment, the grantee or subgrantee may use... requirements. Procedures for managing equipment (including replacement equipment), whether acquired in whole or... original or replacement equipment acquired under a grant or subgrant is no longer needed for the original...

  12. The Cost of Maintaining Educational Communications Equipment.

    Science.gov (United States)

    Humphrey, David A.

    Tentative formulas for calculating the cost of maintaining educational communications equipment are proposed. The formulas are based on a survey of campuses of the State University of New York. The survey analyzed the types of equipment to be maintained, types of maintenance, who uses the equipment, who services the equipment, and the cost…

  13. Quelques commentaires sur les personnages de fiction

    Directory of Open Access Journals (Sweden)

    Umberto Eco

    2010-06-01

    Full Text Available L’auteur met en place des observations et développe des analyses sur le statut des personnages de fiction, mettant à contribution les ressources de l’histoire, de la littérature, de la sémiotique, de la logique et de la narratologie. De quelle vie particulière vivent les personnages de roman, qui fait que nous sommes capables de les tenir pour plus réels que des personnages réels, et que nous sommes enclins à éprouver les sentiments qu’ils éprouvent, même si nous savons qu’ils n’existent pas ? Comment ces personnages de fiction existent-ils, selon quelle « partition » leur existence se développe-t-elle au point d’interférer avec la nôtre ? L’interrogation porte sur la nature de ce flux émotionnel qui s’écoule du lecteur vers les personnages de fiction et les investit de valeur, sur ce qui se projette de la vie vers le roman, entraînant avec lui le lecteur qui se trouve de la sorte impliqué malgré lui dans l’histoire, et se trouve pris dans le mécanisme de l’identification et de la vie fictive.Some commentaries about fiction charactersPutting into form a number of observations and developing an analysis on the status of fiction characters, the author draws on resources coming from history, literature, semiotic, logic et narration. What is that particular life lived by fiction characters that enable us to consider them as being more real than real characters, and to experience the feelings that they experience, even though we know that they do not exist? How do these characters exist? In other words, according to what “script” does their existence develop to the point of interfering with ours? The questioning centres on the nature of the emotional flux which flows from the reader towards the fictional characters thus giving them value, and on what it is which is projected from real life towards the novel and which is capable of sweeping up the reader who, without having particularly intended to do

  14. Les lieux du sacré dans les Miracula sancti Germani d’Heiric d’Auxerre et les Gesta pontificum Autissiodorensium

    Directory of Open Access Journals (Sweden)

    Dominique Iogna-Prat

    2004-09-01

    Full Text Available Comment cerner la notion de sacré dans les textes carolingiens que sont les Gestes des évêques d’Auxerre et les Miracles de saint Germain écrits par l’un des maîtres de l’école carolingienne d’Auxerre, Heiric ? Une étude lexicale précise des mots latins employés par les auteurs permet d’approcher au plus près les concepts renvoyant aux lieux du sacré. Ce sujet de maîtrise. suggéré par D. Iogna-Prat et réalisé sous la direction de M. Bourin (université de Paris I-Panthéon Sorbonne, avec l’aid...

  15. Projet de recherche sur les sexospécificités et les TIC en Afrique ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Il a été démontré que la conception, la production et l'utilisation des technologies de l'information et de la communication (TIC) varient énormément selon que l'on est un homme ou une femme. Par conséquent, la prolifération des TIC dans les pays en développement est comprise et vécue différemment par les hommes et ...

  16. Les transformations de l'image de Saladin dans les sources occidentales

    Directory of Open Access Journals (Sweden)

    Jean Richard

    2009-05-01

    Full Text Available Le personnage de Salāh al-din Yūsuf, officier kurde au service de Nūr al-dïn devenu maître de l'Égypte puis de Damas et enfin d'Alep, et fondateur de l'empire ayyoubide, a été fort controversé de son vivant avant de devenir pour la postérité « le plus pur des héros de l'Islam ». Pour ses adversaires, les Francs d'Orient, il a de bonne heure suscité leur curiosité, et ceux-ci ont recueilli des informations qu'ils ont utilisées, dès avant 1187, dans un Carmen de Saladino où l'aventurier qu'il était à leurs yeux est présenté sous des traits peu recommandables. Son manque de fidélité envers ses maîtres est particulièrement souligné. Les coups très durs qu'il a portés aux Francs ont été assortis de traits de cruauté ; mais ce sont les manifestations d'un esprit chevaleresque, dont les valeurs étaient communes aux deux camps, qui ont vite retenu l'attention. Le trouvère Ambroise le regarde encore comme un ennemi fort capable de perfidie ; mais le traducteur de Guillaume de Tyr adoucit les remarques du livre qu'il mettait en français pour le rendre plus sympathique. Les textes de caractère épique où il apparaît dans la première moitié du XIIIe siècle (Estoires d'Outremer, Ordene de Chevalerie accentuent ce caractère. Mais c'est dans le second cycle de la croisade qu'on le pare des qualités les plus éminentes qu'on attend d'un chevalier. On lui prête des origines chrétiennes (La fille du comte de Ponthieu et on lui attribue le beau rôle, en insistant sur sa générosité et sur sa bravoure, en lui faisant arbitrer des controverses religieuses, en lui prêtant enfin une aspiration à une mort chrétienne, qui sont bien loin du portrait que faisaient de lui les Francs de la fin du XIIe siècle.

  17. Les lexiques des jeunes dans les discours écrits des blogs : pour une approche descriptive

    Directory of Open Access Journals (Sweden)

    Lorenz Paulina

    2014-07-01

    Full Text Available S’il ne faut pas confondre ce qui est appelé communément « langage SMS » et « langage des jeunes », nous avancerons toutefois que les pratiques langagières écrites des jeunes sur les supports modernes de communication, et notamment dans les blogs, présentent des particularités encore peu étudiées. Les traits observables les plus saillants sont ceux de la morphologie graphique, mais il n’en reste pas moins que certains jeunes utilisent des lexiques particuliers dans les blogs qui méritent une attention particulière. Nous nous proposons donc d’étudier les différents lexiques utilisés par des jeunes de 12 à 22 ans dans les blogs de la plateforme skyrock.com aux niveaux de sa diversité, de ses usages sémantiques variable d’un scripteur à l’autre pour un même mot, et de ses particularités morphosyntaxiques. En effet, nous observerons des lexiques divers allant des lexiques perçus comme relevant des cités à des lexiques perçus comme étant « branchés-jeunes », ou encore à des lexiques propres aux supports modernes de communication. Ainsi, nous analyserons des lexiques variés dans leurs usages écrits tels que bolos, bédave, gérer, ouf, tigen, ou encore des lexiques empruntés tels que mouv, full, etc., ainsi que des emplois particuliers de séquences autonomes comme lol. Quelques questions périphériques complèteront notre analyse telle que celles qui concerne l’influence des usages lexicaux entre pairs et le savoir partagé, la distinction de différentes communautés en fonction des lexiques utilisés, ou encore la variabilité des représentations graphiques d’un même mot.

  18. 5th Symposium on Hybrid RANS-LES Methods

    CERN Document Server

    Haase, Werner; Peng, Shia-Hui; Schwamborn, Dieter

    2015-01-01

    This book gathers the proceedings of the Fifth Symposium on Hybrid RANS-LES Methods, which was held on March 19-21 in College Station, Texas, USA. The different chapters, written by leading experts, reports on the most recent developments in flow physics modelling, and gives a special emphasis to industrially relevant applications of hybrid RANS-LES methods and other turbulence-resolving modelling approaches. The book addresses academic researchers, graduate students, industrial engineers, as well as industrial R&D managers and consultants dealing with turbulence modelling, simulation and measurement, and with multidisciplinary applications of computational fluid dynamics (CFD), such as flow control, aero-acoustics, aero-elasticity and CFD-based multidisciplinary optimization. It discusses in particular advanced hybrid RANS-LES methods. Further topics include wall-modelled Large Eddy Simulation (WMLES) methods, embedded LES, and a comparison of the LES methods with both hybrid RANS-LES and URANS methods. ...

  19. Les végétaux. Des symbioses pour mieux vivre

    OpenAIRE

    Suty, Lydie

    2015-01-01

    Les symbioses sont les associations mutualistes les plus abouties entre des espèces vivant dans un écosystème. Cet ouvrage explique le fonctionnement du dialogue moléculaire entre les partenaires de ces interactions. Il présente les principaux types de symbioses et se focalise sur les mycorhizes, symbioses entre des champignons et les racines de la plupart des plantes, et sur les nodules fixateurs d'azote, résultant de la symbiose établie entre des bactéries du sol et les racines de certaines...

  20. Ergonomia e as atividades ocupacionais da equipe de enfermagem Ergonomics and the occupacional activities of the nursing staff

    Directory of Open Access Journals (Sweden)

    Neusa Maria Costa Alexandre

    1998-04-01

    Full Text Available Esse trabalho discute determinadas condições ergonômicas do trabalho que causam lesões no sistema músculo-esquelético da coluna vertebral, relacionando-as com as atividades ocupacionais da equipe de enfermagem.This paper discusses some of the ergonomics conditions that contribute to the development of musculoskeletal disorders of the vertebral column and relates these conditions to the occupational activities of the nursing staff.

  1. Projet pilote de cybergouvernement dans les Caraïbes | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les pays des Caraïbes sont de plus en plus nombreux à adopter les technologies de l'information et de la communication (TIC) dans leur processus de modernisation du secteur public. En 2003, les ... Linkage for Education and Research in Nursing (LEARN), une initiative de TIC-D dans les Caraïbes. Les infirmières ...

  2. Liens entre le savoir et l'innovation dans les services de gestion des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet de recherche-action portera sur l'innovation dans la prestation de services par les administrations locales au Sri Lanka. Il ciblera principalement les administrateurs locaux chargés de la prestation des services de gestion des déchets solides. Les chercheurs établiront dans quelle mesure les interactions entre les ...

  3. Palestine : tous les projets | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les conflits violents, cela a été maintes fois démontré, entraînent de graves problèmes sociaux et de santé mentale à long terme chez les enfants et les adolescents qui y sont exposés. Date de début : 24 novembre 2007. End Date: 13 mai 2011. Sujet: CONFLICTS, VIOLENCE, MENTAL STRESS, SOCIAL PSYCHOLOGY.

  4. les urgences urologiques au centre hospitalier de louga, senegal

    African Journals Online (AJOL)

    Ibrahima Diabaté

    1 juin 2010 ... (n = 1) ce qui a conduit respectivement à une reprise de l'hémostase et à un débridement de tous les tissus nécrotiques. Toutes les études sur les complications de la circoncision [11,12] ont montré que l'hémorragie et l'infection sont au premier plan, suivies par d'autres complications parfois plus graves.

  5. Les neuropathies peripheriques associees a l'infection a VIH ...

    African Journals Online (AJOL)

    Contexte et justification: L'infection à VIH a pris d'ampleur au Togo et en Afrique subsaharienne. Les neuropathies périphériques (NP) constituent l'une des manifestations neurologiques les plus couramment décrites au cours de cette infection. But de l'étude: Déterminer la fréquence et les différents types de NP liées au ...

  6. Influer sur les politiques publiques | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    3 nov. 2010 ... Des économistes de l'environnement ont conçu un système équitable pour la perception des droits destinés à financer les activités de nettoyage d'un village gravement touché par la pollution. Les résultats obtenus incitent les autorités à instaurer d'autres mesures. Au Vietnam, beaucoup de familles vivant ...

  7. Taxes sur les cigarettes en Tanzanie | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    On s'attend à ce que cette hausse du tabagisme ait d'importantes répercussions sur la santé publique et le développement économique. Il ressort de l'expérience d'autres régions que le moyen le plus efficace de renverser une telle tendance consiste à augmenter les taxes sur les cigarettes. Toutefois, les responsables des ...

  8. POPULATION ET SANTÉ DANS LES PAYS EN DÉVELOPPEMENT

    International Development Research Centre (IDRC) Digital Library (Canada)

    aux applications en harmonie avec les stratégies et les pratiques élaborées. ...... ainsi que de recrutement et de formation du personnel de terrain, notamment des ..... des stratégies en matière de services ou des politiques, ce qui nécessite la ..... La vérification des données est aussi entreprise dans le but de détecter les ...

  9. SECTION 4 : BUDGET Remarque : Pour en savoir plus sur les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    (anonymous)

    SECTION 4 : BUDGET. Remarque : Pour en savoir plus sur les restrictions budgétaires, consulter l'appel à propositions et la foire aux questions. Inscrire toutes les sommes en dollars canadiens. 4.1 Indiquez toutes les dépenses prévues (en CAD). Inscrire une valeur numérique sans caractères, ni espaces, ni virgules (p. ex ...

  10. Plaidoyer pour le lavage de nez dans les pathologies naso ...

    African Journals Online (AJOL)

    Le lavage de nez permet l'humidification des muqueuses partant favorise le nettoyage mucociliaire en enlevant voire diminuant les croutes favorise leur élimination et ainsi la guérison en réduisant le recours aux antibiotiques [4-10]. Sans danger, le lavage de nez est bien tolérée tant chez les enfants que chez les adultes.

  11. Production horticole saine et durable dans les Andes centrales ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La pratique de l'horticulture dans les vallées andines situées à mi-altitude requiert des quantités considérables de pesticides mutagènes très dangereux. Mais il s'agit d'une source de revenu supplémentaire pour les familles agricoles et d'une source d'approvisionnement en légumes frais pour les marchés des villes.

  12. Harambee : affermir les voix africaines par la collaboration | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les avantages et la valeur ajoutée du travail en collaboration ont clairement été démontrés en ce qui concerne le développement de logiciels libres. On ignore cependant comment les réseaux et les communautés de praticiens se servent de leur connaissance des processus et des technologies pour favoriser une ...

  13. Canada : tous les projets | Page 3 | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet produira des données probantes pour aider à orienter les stratégies de traitement chez les patients atteints de déficits de la mémoire et à réduire les symptômes associés à la maladie d'Alzheimer. Région: India, Canada, Israel. Programme: Foundations for Innovation. Financement total : CA$ 669,937.00.

  14. Canada : tous les projets | Page 3 | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet produira des données probantes pour aider à orienter les stratégies de traitement chez les patients atteints de déficits de la mémoire et à réduire les symptômes associés à la maladie d'Alzheimer. Région: Canada, Israel, India. Programme: Programme de recherche en santé Canada-Israël. Financement total ...

  15. impacts des rejets industriels sur les eaux souterraines

    African Journals Online (AJOL)

    USER

    pollution et sont nombreuses, notamment les usines sidérurgiques, métalliques et pétrochimiques. Leurs rejets ont des effets néfastes sur les eaux de la région. Actuellement, les effluents industriels situés dans la région de Berrahal, contiennent d'importantes quantités de produits chimiques organiques et inorganiques et ...

  16. Argentina : tous les projets | Page 6 | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Autonomie et gestion communautaire des aires protégées de la province de Neuquén, en Argentine, et de la région de l'Araucanie, au Chili ... Les pays membres du Réseau de recherche sur les systèmes et services de santé dans les pays du cône Sud (Red de Investigación en Sistemas y Servicios de Salud en el Cono ...

  17. Les cultures orphelines peuvent aider à vaincre la famine | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 oct. 2010 ... Il y a à peine deux décennies, les légumineuses à graines étaient des cultures orphelines au Canada; on en produisait peu, et les chercheurs n'y prêtaient guère attention. Cependant, des avancées dans les sciences de l'agriculture et un marché international dynamique ont eu tôt fait de transformer le ...

  18. Avantages des biodigesteurs sur le bois de chauffe dans les ...

    African Journals Online (AJOL)

    Le déficit énergétique constitue une contrainte à l'épanouissement des ménages ruraux notamment, au niveau de l'énergie de cuisson. Les femmes utilisent le bois de chauffe pour les besoins énergétiques de la cuisson mais aussi, pour la pasteurisation du lait. Cette étude met en évidence les avantages de l'utilisation ...

  19. Ethiopia : tous les projets | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le but de ce projet consiste à améliorer la compréhension des complexités du mariage d'enfants et de la parentalité pour éclairer les politiques et les programmes. Sujet: Gender. Région: Ethiopia, Peru, Zambia. Programme: Gouvernance et justice. Financement total : CA$ 1,120,200.00. Alliance statistique pour les faits ...

  20. [Equipment and technology in robotics].

    Science.gov (United States)

    Murphy, Declan; Challacombe, Ben; Nedas, Tim; Elhage, Oussama; Althoefer, Kaspar; Seneviratne, Lakmal; Dasgupta, Prokar

    2007-05-01

    We review the evolution and current status of robotic equipment and technology in urology. We also describe future developments in the key areas of virtual reality simulation, mechatronics and nanorobotics. The history of robotic technology is reviewed and put into the context of current systems. Experts in the associated fields of nanorobotics, mechatronics and virtual reality simulation simulation review the important future developments in these areas.