WorldWideScience

Sample records for presents cutting-edge research

  1. Skype Me! Astronomers, Students, and Cutting-Edge Research

    Science.gov (United States)

    Hickox, Ryan C.; Gauthier, Adrienne J.

    2014-06-01

    A primary goal of many university science courses is to promote understanding of the process of contemporary scientific inquiry. One powerful way to achieve this is for students to explore current research and then interact directly with the leading scientist, the feasibility of which has recently increased dramatically due to free online video communication tools. We report on a program implemented at Dartmouth College in which students connect with a guest astronomer through Skype (video chat). The Skype session is wrapped in a larger activity where students explore current research articles, interact with the astronomer, and then reflect on the experience. The in-class Skype discussions require a small time commitment from scientists (20-30 minutes, with little or no need for preparation) while providing students direct access to researchers at the cutting edge of modern astronomy. We outline the procedures used to implement these discussions, and present qualitative assessments of student's understanding of the process of research, as well as feedback from the guest astronomers.

  2. Cutting Edge Research in Homeopathy: HRI's second international research conference in Rome.

    Science.gov (United States)

    Tournier, Alexander L; Roberts, E Rachel

    2016-02-01

    Rome, 3rd-5th June 2015, was the setting for the Homeopathy Research Institute's (HRI) second conference with the theme 'Cutting Edge Research in Homeopathy'. Attended by over 250 delegates from 39 countries, this event provided an intense two and a half day programme of presentations and a forum for the sharing of ideas and the creation of international scientific collaborations. With 35 oral presentations from leaders in the field, the scientific calibre of the programme was high and the content diverse. This report summarises the key themes underpinning the cutting edge data presented by the speakers, including six key-note presentations, covering advancements in both basic and clinical research. Given the clear commitment of the global homeopathic community to high quality research, the resounding success of both Barcelona 2013 and Rome 2015 HRI conferences, and the dedicated support of colleagues, the HRI moves confidently forward towards the next biennial conference. Copyright © 2015.

  3. Present address of cutting-edge chemistry in Korea

    International Nuclear Information System (INIS)

    2007-01-01

    This introduces the research center, company and chemistry department with excellent results. This book lists the name of those, which are organic molecule design laboratory by Sunmun university, intelligence Nano technology research center by Biotechnology, Ewha university, Nano chemistry laboratory by Department of chemistry, Yonsei university, science education research center by Haying university, solid chemistry laboratory by Department of Nano science, Ewha university, the center of innovation of chemistry industry with R and D by LG chemistry, Korea Research Institute of Chemical Technology, Department of Chemistry, Sogang university, Department of Chemistry, Busan university and Department of Chemistry, Dankook university.

  4. EPA's Research at the Cutting Edge of Exposure Science

    Science.gov (United States)

    EPA’s National Exposure Research Laboratory (NERL) serves as the lead for exposure science across U.S. Federal agencies. Exposure science has gained importance with increased appreciation of environmental influences on population disease burden. At a time when population ...

  5. At the service of cutting-edge research

    CERN Multimedia

    ISS Magazine

    2012-01-01

    Many external companies work for CERN, including ISS, a market leader in the area of service provision. In an article, republished in full below, due to appear in the next edition of the ISS Magazine, the company puts CERN in the spotlight. Take a moment to discover how an external company sees CERN.   CERN is a world-renowned research facility. ISS, with its 100-strong workforce ensures that the scientists can concentrate 100% on science. Since 1954, scientists from all corners of the globe have been seeking out the origins of the Universe at CERN, the European Laboratory for Particle Physics. CERN has been responsible for ground-breaking discoveries and inventions, such as the Worldwide Web in 1989. The task entrusted to ISS by CERN is as unusual as the laboratory is extraordinary. What started as a simple window-cleaning contract in 1967 has now evolved into a complex logistics operation. Keeping storage costs low For the past 25 years, ISS have been organising CERN's stores management...

  6. Cutting-edge research in developing the library of the future new paths for building future services

    CERN Document Server

    Eden, Bradford Lee

    2015-01-01

    Cutting-Edge Research in the 21st-Century Academic Library: New Paths for Building Future Services explores examples of exciting new library services and workflows and provides opportunities for the rest of the library profession to model and adapt for their own communities and patrons.

  7. Justification of parameters artificial soil for laboratory research of cutting edge wear

    Directory of Open Access Journals (Sweden)

    I. V. Liskin

    2017-01-01

    Full Text Available For soil cultivation with the cutting tools of agricultural machines we can allocate three main types of shavings: shift, separation and continuous chip. The shift is most accurately expressed on sandy soils, a separation - on clay and loamy, continuous chip - on humid soils with the high content of clay particles. In field conditions researches of regularities of cutting edges wear are complicated because of heterogeneity of physic and mechanical properties of the soil and the changing climatic conditions. At laboratory modeling of soil conditions we can make experiments independent of weather and season. For development of the artificial soil and depend modeling of edges wear we considered conditions of creation of model with use mechanics of abrasive wear. Have allocated The major factors defining character and intensity of wear were allocated. The wearing-out ability of abrasive particles is defined by the radius of the curve of their sharp ledges. This radius depends on the particle size. The hardness of the soil influences wear of the cutting details and characterizes penetration into it of the cutting elements, and degree of fixedness of abrasive particles defines shaving type. We conseeder the soil as the abrasive environment with the particles which are in a condition of non-rigid fixing and have an opportunity to move relatively each other or to turn on itself under the influence of normal and tangential stress. Type of shaving when soil layer destruction depends on a ratio of the normal and tangential stress characterizing degree of fixedness of firm particles. We conducted researches of physic and mechanical properties of the artificial soil on the basis of quartz sand and paraffin. Injection of the petrolatum into structure of the artificial soil reduces the hardness and degree of fixedness of firm particles, but the ceresin increases these indicators. The mechanical structure was changed due to introduction of dust-like cement and

  8. Cutting-edge technology for public health workforce training in comparative effectiveness research.

    Science.gov (United States)

    Salinas-Miranda, Abraham A; Nash, Michelle C; Salemi, Jason L; Mbah, Alfred K; Salihu, Hamisu M

    2013-06-01

    A critical mass of public health practitioners with expertise in analytic techniques and best practices in comparative effectiveness research is needed to fuel informed decisions and improve the quality of health care. The purpose of this case study is to describe the development and formative evaluation of a technology-enhanced comparative effectiveness research learning curriculum and to assess its potential utility to improve core comparative effectiveness research competencies among the public health workforce. Selected public health experts formed a multidisciplinary research collaborative and participated in the development and evaluation of a blended 15-week comprehensive e-comparative effectiveness research training program, which incorporated an array of health informatics technologies. Results indicate that research-based organizations can use a systematic, flexible, and rapid means of instructing their workforce using technology-enhanced authoring tools, learning management systems, survey research software, online communities of practice, and mobile communication for effective and creative comparative effectiveness research training of the public health workforce.

  9. George E. Pake Prize Lecture: Physical Sciences Research at IBM: Still at the Cutting Edge

    Science.gov (United States)

    Theis, Thomas

    2015-03-01

    The information technology revolution is in its ``build out'' phase. The foundational scientific insights and hardware inventions are now many decades old. The microelectronics industry is maturing. An increasing fraction of the total research investment is in software and services, as applications of information technology transform every business and every sector of the public and private economy. Yet IBM Research continues to make substantial investments in hardware technology and the underlying physical sciences. While some of this investment is aimed at extending the established transistor technology, an increasing fraction is aimed at longer-term and possibly disruptive research - new devices for computing, such as tunneling field-effect transistors and nanophotonic circuits, and new architectures, such as neurosynaptic systems and quantum computing. This research investment is a bet that the old foundations of information technology are ripe for reinvention. After all, today's information technology devices and systems operate far from any fundamental limits on speed and energy efficiency. But how can IBM make risky long-term research investments in an era of global competition, with financial markets focused on the short term? One important answer is partnerships. Since its early days, IBM Research has pursued innovation in information technology and innovation in the ways it conducts the business of research. By continuously evolving new models for research and development partnerships, it has extended its global reach, increased its impact on IBM's customers, and expanded the breadth and depth of its research project portfolio. Research in the physical sciences has often led the way. Currently on assignment to the Semiconductor Research Corporation.

  10. Prestigious nuclear research organization orders Silicom's cutting-edge server adapters

    CERN Multimedia

    2003-01-01

    "Silicom Ltd today announced that one of the world's largest and most prestigious nuclear research organization has placed an initial order for its Gigabit Ethernet Server Adapters. Silicom's high-performance adapters will be deployed in the organization's state-of-the-art particle physics laboratory servers to help them attain reliable gigabit transfer rates" (1/2 page).

  11. On the Cutting Edge of Research to Conserve At-Risk Species: Maximizing Impact through Partnerships.

    Science.gov (United States)

    Marquardt, Shauna R; Annis, Mandy; Drum, Ryan G; Hummel, Stephanie Longstaff; Mosby, David E; Smith, Tamara

    2018-04-25

    Today's conservation challenges are complex. Solving these challenges often requires scientific collaborations that extend beyond the scope, expertise, and capacity of any single agency, organization, or institution. Conservation efforts can benefit from interdisciplinary collaboration, scientific and technological innovations, and the leveraging of capacity and resources among partners. Here we explore a series of case studies demonstrating how collaborative scientific partnerships are furthering the mission of the U.S. Fish and Wildlife Service, including: 1) contaminants of emerging concern in the Great Lakes Basin, 2) Poweshiek skipperling conservation, 3) using technology to improve population survey methods for bats and monarch butterfly, and 4) Big River restoration in the Southeast Missouri lead mining district. These case studies illustrate how strategic and effective scientific collaboration is a multi-stage process that requires investment of time and resources by all participants. Early coordination and communication is crucial to aligning planned work with scientific and decision-making needs. Collaborations between USFWS and external scientists can be mutually beneficial by supporting the agency mission while also providing an avenue for innovative research to be directly applied in conservation decisions and management actions.

  12. CERN Library | Arthur I. Miller presents "Colliding worlds: How Cutting-Edge Science Is Redefining Contemporary Art" | 21 October

    CERN Multimedia

    2014-01-01

    In recent decades, an exciting new art movement has emerged in which artists illuminate the latest advances in science.   Some of their provocative creations - a live rabbit implanted with the fluorescent gene of a jellyfish, a gigantic glass-and-chrome sculpture of the Big Bang itself - can be seen in traditional art museums and magazines, while others are being made by leading designers at Pixar, Google's Creative Lab and the MIT Media Lab. Arthur I. Miller takes readers on a wild journey to explore this new frontier. From the movement's origins a century ago - when Einstein shaped Cubism and X-rays affected fine photography - to the latest discoveries of biotechnology, cosmology and quantum physics, Miller shows how today's artists and designers are producing work at the cutting edge of science. Tuesday, 21 October 2014 at 14:30 in the Library, Bldg. 52 1-052 https://indico.cern.ch/event/346299/ *Coffee will be served from 2 p.m.* "Colliding Worlds: How Cutt...

  13. Cutting edge: HLA-B27 acquires many N-terminal dibasic peptides: coupling cytosolic peptide stability to antigen presentation

    NARCIS (Netherlands)

    Herberts, Carla A.; Neijssen, Joost J.; de Haan, Jolanda; Janssen, Lennert; Drijfhout, Jan Wouter; Reits, Eric A.; Neefjes, Jacques J.

    2006-01-01

    Ag presentation by MHC class I is a highly inefficient process because cytosolic peptidases destroy most peptides after proteasomal generation. Various mechanisms shape the MHC class I peptidome. We define a new one: intracellular peptide stability. Peptides with two N-terminal basic amino acids are

  14. Material Behavior At The Extreme Cutting Edge In Bandsawing

    International Nuclear Information System (INIS)

    Sarwar, Mohammed; Haider, Julfikar; Persson, Martin; Hellbergh, Haakan

    2011-01-01

    In recent years, bandsawing has been widely accepted as a favourite option for metal cutting off operations where the accuracy of cut, good surface finish, low kerf loss, long tool life and high material removal rate are required. Material removal by multipoint cutting tools such as bandsaw is a complex mechanism owing to the geometry of the bandsaw tooth (e.g., limited gullet size, tooth setting etc.) and the layer of material removed or undeformed chip thickness or depth of cut (5 μm-50 μm) being smaller than or equal to the cutting edge radius (5 μm-15 μm). This situation can lead to inefficient material removal in bandsawing. Most of the research work are concentrated on the mechanics of material removal by single point cutting tool such as lathe tool. However, such efforts are very limited in multipoint cutting tools such as in bandsaw. This paper presents the fundamental understanding of the material behaviour at the extreme cutting edge of bandsaw tooth, which would help in designing and manufacturing of blades with higher cutting performance and life. ''High Speed Photography'' has been carried out to analyse the material removal process at the extreme cutting edge of bandsaw tooth. Geometric model of chip formation mechanisms based on the evidences found during ''High Speed Photography'' and ''Quick Stop'' process is presented. Wear modes and mechanism in bimetal and carbide tipped bandsaw teeth are also presented.

  15. An Industry/Academe Consortium for Achieving 20% wind by 2030 through Cutting-Edge Research and Workforce Training

    Energy Technology Data Exchange (ETDEWEB)

    Sotiropoulos, Fotis [Univ. of Minnesota, Minneapolis, MN (United States); Marr, Jeffrey D.G. [Univ. of Minnesota, Minneapolis, MN (United States); Milliren, Christopher [Univ. of Minnesota, Minneapolis, MN (United States); Kaveh, Mos [Univ. of Minnesota, Minneapolis, MN (United States); Mohan, Ned [Univ. of Minnesota, Minneapolis, MN (United States); Stolarski, Henryk [Univ. of Minnesota, Minneapolis, MN (United States); Glauser, Mark [Univ. of Minnesota, Minneapolis, MN (United States); Arndt, Roger [Univ. of Minnesota, Minneapolis, MN (United States)

    2013-12-01

    In January 2010, the University of Minnesota, along with academic and industry project partners, began work on a four year project to establish new facilities and research in strategic areas of wind energy necessary to move the nation towards a goal of 20% wind energy by 2030. The project was funded by the U.S. Department of Energy with funds made available through the American Recovery and Reinvestment Act of 2009. $7.9M of funds were provided by DOE and $3.1M was provided through matching funds. The project was organized into three Project Areas. Project Area 1 focused on design and development of a utility scale wind energy research facility to support research and innovation. The project commissioned the Eolos Wind Research Field Station in November of 2011. The site, located 20 miles from St. Paul, MN operates a 2.5MW Clipper Liberty C-96 wind turbine, a 130-ft tall sensored meteorological tower and a robust sensor and data acquisition network. The site is operational and will continue to serve as a site for innovation in wind energy for the next 15 years. Project Areas 2 involved research on six distinct research projects critical to the 20% Wind Energy by 2030 goals. The research collaborations involved faculty from two universities, over nine industry partners and two national laboratories. Research outcomes include new knowledge, patents, journal articles, technology advancements, new computational models and establishment of new collaborative relationships between university and industry. Project Area 3 focused on developing educational opportunities in wind energy for engineering and science students. The primary outcome is establishment of a new graduate level course at the University of Minnesota called Wind Engineering Essentials. The seminar style course provides a comprehensive analysis of wind energy technology, economics, and operation. The course is highly successful and will continue to be offered at the University. The vision of U.S. DOE to

  16. Consumer Neuroscience : Pricing research to gain and sustain a cutting edge competitive advantage by improving customer value and profitability

    OpenAIRE

    Kumlehn, Malte

    2011-01-01

    This is the first study that exclusively focuses on gaining knowledge of the vast opportunities that Neuroscientific pricing research offers for marketing purposes. The findings of this study provide evidence of the importance to improve customer and organizational decision making. The findings further highlight the crucial importance of Neuroscientific pricing research. Moreover, evidence is provided that fundamental and well formulated models and concepts need to be developed in the discipl...

  17. search.bioPreprint: a discovery tool for cutting edge, preprint biomedical research articles [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Carrie L. Iwema

    2016-07-01

    Full Text Available The time it takes for a completed manuscript to be published traditionally can be extremely lengthy. Article publication delay, which occurs in part due to constraints associated with peer review, can prevent the timely dissemination of critical and actionable data associated with new information on rare diseases or developing health concerns such as Zika virus. Preprint servers are open access online repositories housing preprint research articles that enable authors (1 to make their research immediately and freely available and (2 to receive commentary and peer review prior to journal submission. There is a growing movement of preprint advocates aiming to change the current journal publication and peer review system, proposing that preprints catalyze biomedical discovery, support career advancement, and improve scientific communication. While the number of articles submitted to and hosted by preprint servers are gradually increasing, there has been no simple way to identify biomedical research published in a preprint format, as they are not typically indexed and are only discoverable by directly searching the specific preprint server websites. To address this issue, we created a search engine that quickly compiles preprints from disparate host repositories and provides a one-stop search solution. Additionally, we developed a web application that bolsters the discovery of preprints by enabling each and every word or phrase appearing on any web site to be integrated with articles from preprint servers. This tool, search.bioPreprint, is publicly available at http://www.hsls.pitt.edu/resources/preprint.

  18. Proteolytic activation of the SARS-coronavirus spike protein: cutting enzymes at the cutting edge of antiviral research.

    Science.gov (United States)

    Simmons, Graham; Zmora, Pawel; Gierer, Stefanie; Heurich, Adeline; Pöhlmann, Stefan

    2013-12-01

    The severe acute respiratory syndrome (SARS) pandemic revealed that zoonotic transmission of animal coronaviruses (CoV) to humans poses a significant threat to public health and warrants surveillance and the development of countermeasures. The activity of host cell proteases, which cleave and activate the SARS-CoV spike (S) protein, is essential for viral infectivity and constitutes a target for intervention. However, the identities of the proteases involved have been unclear. Pioneer studies identified cathepsins and type II transmembrane serine proteases as cellular activators of SARS-CoV and demonstrated that several emerging viruses might exploit these enzymes to promote their spread. Here, we will review the proteolytic systems hijacked by SARS-CoV for S protein activation, we will discuss their contribution to viral spread in the host and we will outline antiviral strategies targeting these enzymes. This paper forms part of a series of invited articles in Antiviral Research on "From SARS to MERS: 10years of research on highly pathogenic human coronaviruses.'' Copyright © 2013 Elsevier B.V. All rights reserved.

  19. Tapping Recent Alumni for the Development of Cutting-Edge, Investigative Teaching Laboratory Experiments

    Science.gov (United States)

    Brodl, Mark R.

    2005-01-01

    This project presents a model for the development of an innovative, highly-experimental teaching laboratory course that centers upon collaborative efforts between recent alumni currently enrolled in Ph. D. programs (consultants) and current faculty. Because these consultants are involved in cutting-edge research, their combined talents represent a…

  20. Involving Minority High School Students in Cutting Edge Research through C-DEBI, an NSF-National Science and Technology Center

    Science.gov (United States)

    Singer, E.; Edwards, K. J.

    2012-12-01

    The Center for Dark Energy Biosphere Investigations (C-DEBI) was established as a National Science and Technology Center (NTC) funded by NSF in 2009. Its mission is to explore life beneath the seafloor and make transformative discoveries that advance science, benefit society, and inspire people of all ages and origins. Thanks to the multi-institutional character of C-DEBI, the Center has not only started a collaborative framework for experimental and exploratory research, but also targets education programs at the K-12, undergraduate, graduate and postdoctoral levels involving biogeochemists, microbiologists, geochemists and geologists. An example for this is the introduction of deep biosphere research into the K-12 classroom. In this context, C-DEBI has collaborated with teachers from the Animo Leadership High School in Inglewood, which is ranked 27th within California and has a total minority enrollment of 99%, to adapt Marine Biology classes and introduce latest Deep Biosphere Science discoveries. Three high school students participated in a pilot project over 6 months to gain hands-on experience in an ongoing study in a Marine Microbiology laboratory at University of Southern California. Graduate and postdoctoral students from the Departments of Biological and Earth Sciences supervised theory, praxis and project design, which was aimed at culturing strains of Marinobacter, one of the most ubiquitous marine microbial genera, and preparing extracted DNA for sequencing using the latest Ion Torrent Technology. Students learned about the interdisciplinary global context of the study and gained experience in laboratory procedures, including basic aseptical techniques, molecular biology methods, and cutting-edge sequencing Technology, as well as problem-solving and creative thinking in project preparation and conduction. This hands-on training included discussions about the 'Whys' and 'Hows' in today's research with respect to their specific project, but also from a

  1. Information Commons Features Cutting-Edge Conservation and Technology

    Science.gov (United States)

    Gilroy, Marilyn

    2011-01-01

    This article features Richard J. Klarchek Information Commons (IC) at Loyola University Chicago, an all-glass library building on the shore of Chicago's Lake Michigan that is not only a state-of-the-art digital research library and study space--it also runs on cutting-edge energy technology. The building has attracted attention and visitors from…

  2. Cutting Edge Localisation in an Edge Profile Milling Head

    NARCIS (Netherlands)

    Fernandez Robles, Laura; Azzopardi, George; Alegre, Enrique; Petkov, Nicolai

    2015-01-01

    Wear evaluation of cutting tools is a key issue for prolonging their lifetime and ensuring high quality of products. In this paper, we present a method for the effective localisation of cutting edges of inserts in digital images of an edge profile milling head. We introduce a new image data set of

  3. Design of a Control System for Quality Maintenance on Cutting Edges of Files Production

    Directory of Open Access Journals (Sweden)

    E. Seabra

    2000-01-01

    Full Text Available The file cutting edges are the most important parameter that influence the performance of the filing operation. The practice shows that the most efficient way of generating these cutting edges is by penetration, by blow, of a cutting tool, which creates a plastic deformation on the file body. The penetration depth is probably the most important factor of the final quality of a file. In the existing machines of files manufacturing, this depth is manually adjusted by the operator, using specific mechanism. This means that files are manufactured on an empirical basis, relying on subjective factors, that do not allow to keep constant quality level of the production. In a research work, being developed in the University of Minho, it is intended to eliminate the subjectivity factors by the means of the evolution of the present “all-mechanical” system to a “mechatronic” one. In this paper, which is related with that research work, it presented a study of a round files production machine, regarding the identification, as well as the categorisation, of the operating parameters that affect the cutting edges production. They are, as well, defined and quantified those factors that influence the final quality of a round file.

  4. Evaluation of alternative snow plow cutting edges.

    Science.gov (United States)

    2009-05-01

    With approximately 450 snow plow trucks, the Maine Department of Transportation (MaineDOT) uses in : excess of 10,000 linear feet of plow cutting edges each winter season. Using the 2008-2009 cost per linear : foot of $48.32, the Departments total co...

  5. Dermatology education and the Internet: traditional and cutting-edge resources.

    Science.gov (United States)

    Hanson, Anne H; Krause, L Kendall; Simmons, Rachel N; Ellis, Jeffrey I; Gamble, Ryan G; Jensen, J Daniel; Noble, Melissa N; Orser, Michael L; Suarez, Andrea L; Dellavalle, Robert P

    2011-10-01

    The number and variety of dermatological medical resources available online has grown exponentially over the past decade. Internet-based resources allow for immediate and easy access to information for both medical education and reference purposes. Although clinicians continue to turn to the Internet for clinical information and still images, tech-savvy medical students are currently accessing a variety of exciting new resources, including discussion boards, wikis, streaming video, podcasts, journal clubs, online communities, and interactive diagnostic experiences to augment their medical education. The objective of this study was to identify traditional and cutting-edge online dermatology resources. We present a sampling of the top dermatology Internet resources, as assessed by a group of medical students in our university dermatology research lab. These resources were ranked by using a matrix derived from the Silberg Criteria, which assessed authorship, attribution, disclosure, currency, and content. Results indicate comparable ranking and approval of cutting-edge resources as traditional online sources. The ranked resources in each category are provided with URLs for readers' use. These cutting-edge online dermatology resources represent excellent sources for continuing education for students and clinicians alike. Resources such as these likely represent the future of medical education, as they allow for self-directed and supplementary education as well as remote access. Copyright © 2010 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  6. An ultra-precision tool nanoindentation instrument for replication of single point diamond tool cutting edges

    Science.gov (United States)

    Cai, Yindi; Chen, Yuan-Liu; Xu, Malu; Shimizu, Yuki; Ito, So; Matsukuma, Hiraku; Gao, Wei

    2018-05-01

    Precision replication of the diamond tool cutting edge is required for non-destructive tool metrology. This paper presents an ultra-precision tool nanoindentation instrument designed and constructed for replication of the cutting edge of a single point diamond tool onto a selected soft metal workpiece by precisely indenting the tool cutting edge into the workpiece surface. The instrument has the ability to control the indentation depth with a nanometric resolution, enabling the replication of tool cutting edges with high precision. The motion of the diamond tool along the indentation direction is controlled by the piezoelectric actuator of a fast tool servo (FTS). An integrated capacitive sensor of the FTS is employed to detect the displacement of the diamond tool. The soft metal workpiece is attached to an aluminum cantilever whose deflection is monitored by another capacitive sensor, referred to as an outside capacitive sensor. The indentation force and depth can be accurately evaluated from the diamond tool displacement, the cantilever deflection and the cantilever spring constant. Experiments were carried out by replicating the cutting edge of a single point diamond tool with a nose radius of 2.0 mm on a copper workpiece surface. The profile of the replicated tool cutting edge was measured using an atomic force microscope (AFM). The effectiveness of the instrument in precision replication of diamond tool cutting edges is well-verified by the experimental results.

  7. Blending cutting edge science with farmers' know-how to improve

    International Development Research Centre (IDRC) Digital Library (Canada)

    Blending cutting edge science with farmers' .... potential to improve both the daily nutrition of ... daily nutrition and long-term health of communities ... Research Centre (IDRC), undertaken with financial support from the Government of Canada,.

  8. Cutting edge technology to enhance nursing classroom instruction at Coppin State University.

    Science.gov (United States)

    Black, Crystal Day; Watties-Daniels, A Denyce

    2006-01-01

    Educational technologies have changed the paradigm of the teacher-student relationship in nursing education. Nursing students expect to use and to learn from cutting edge technology during their academic careers. Varied technology, from specified software programs (Tegrity and Blackboard) to the use of the Internet as a research medium, can enhance student learning. The authors provide an overview of current cutting edge technologies in nursing classroom instruction and its impact on future nursing practice.

  9. Effects of Cutting Edge Microgeometry on Residual Stress in Orthogonal Cutting of Inconel 718 by FEM.

    Science.gov (United States)

    Shen, Qi; Liu, Zhanqiang; Hua, Yang; Zhao, Jinfu; Lv, Woyun; Mohsan, Aziz Ul Hassan

    2018-06-14

    Service performance of components such as fatigue life are dramatically influenced by the machined surface and subsurface residual stresses. This paper aims at achieving a better understanding of the influence of cutting edge microgeometry on machined surface residual stresses during orthogonal dry cutting of Inconel 718. Numerical and experimental investigations have been conducted in this research. The cutting edge microgeometry factors of average cutting edge radius S¯, form-factor K , and chamfer were investigated. An increasing trend for the magnitudes of both tensile and compressive residual stresses was observed by using larger S¯ or introducing a chamfer on the cutting edges. The ploughing depth has been predicted based on the stagnation zone. The increase of ploughing depth means that more material was ironed on the workpiece subsurface, which resulted in an increase in the compressive residual stress. The thermal loads were leading factors that affected the surface tensile residual stress. For the unsymmetrical honed cutting edge with K = 2, the friction between tool and workpiece and tensile residual stress tended to be high, while for the unsymmetrical honed cutting edge with K = 0.5, the high ploughing depth led to a higher compressive residual stress. This paper provides guidance for regulating machine-induced residual stress by edge preparation.

  10. On the Cutting Edge: Workshops, Online Resources, and Community Development

    Science.gov (United States)

    Mogk, D. W.; Macdonald, H.; Manduca, C. A.; Tewksbury, B. J.; Fox, S.; Iverson, E. A. R.; Beane, R. J.; Mcconnell, D. A.; Wiese, K.; Wysession, M. E.

    2014-12-01

    On the Cutting Edge, funded by NSF since 2002, offers a comprehensive professional development program for geoscience faculty. The program includes an annual integrated in-person and virtual workshop series, has developed an extensive collection of peer-reviewed instructional activities and related online resources, and supports continuing community development through sponsorship of webinars, listservs, opportunities for community contributions, and dissemination of resources to keep faculty current in their science and pedagogic practices. On the Cutting Edge (CE) has offered more than 100 face-to-face and virtual workshops, webinars, journal clubs, and other events to more than 3000 participants. The award-winning website has more than 5000 pages including 47 modules on career management, pedagogy, and geoscience topics. It has more than 1800 instructional activities contributed by the community, the majority of which have been peer-reviewed. The website had more than one million visitors last year. We have worked to support a community in which faculty improve their teaching by designing courses using research-based methods to foster higher-order thinking, incorporate geoscience data, and address cognitive and affective aspects of learning as well as a community in which faculty are comfortable and successful in managing their careers. The program addresses the needs of faculty in all career stages at the full spectrum of institutions and covering the breadth of the geoscience curriculum. We select timely and compelling topics that attract different groups of participants. CE workshops are interactive, model best pedagogical practices, emphasize participant learning, provide opportunities for participants to share their knowledge and experience, provide high-quality resources, give participants time to reflect and to develop action plans, and help transform their ideas about teaching. On the Cutting Edge has had an impact on teaching based on data from national

  11. Teaching about Climate Change and Energy with Online Materials and Workshops from On the Cutting Edge

    Science.gov (United States)

    Kirk, K. B.; Manduca, C. A.; Myers, J. D.; Loxsom, F.

    2009-12-01

    Global climate change and energy use are among the most relevant and pressing issues in today’s science curriculum, yet they are also complex topics to teach. The underlying science spans multiple disciplines and is quickly evolving. Moreover, a comprehensive treatment of climate change and energy use must also delve into perspectives not typically addressed in geosciences courses, such as public policy and economics. Thus, faculty attempting to address these timely issues face many challenges. To support faculty in teaching these subjects, the On the Cutting Edge faculty development program has created a series of websites and workshop opportunities to provide faculty with information and resources for teaching about climate and energy. A web-based collection of teaching materials was developed in conjunction with the On the Cutting Edge workshops “Teaching about Energy in Geoscience Courses: Current Research and Pedagogy.” The website is designed to provide faculty with examples, references and ideas for either incorporating energy topics into existing geoscience courses or for designing or refining a course about energy. The website contains a collection of over 30 classroom and lab activities contributed by faculty and covering such diverse topics as renewable energy, energy policy and energy conservation. Course descriptions and syllabi for energy courses address audiences ranging from introductory courses to advanced seminars. Other materials available on the website include a collection of visualizations and animations, a catalog of recommended books, presentations and related references from the teaching energy workshops, and ideas for novel approaches or new topics for teaching about energy in the geosciences. The Teaching Climate Change website hosts large collections of teaching materials spanning many different topics within climate change, climatology and meteorology. Classroom activities highlight diverse pedagogic approaches such as role

  12. Recommended numerical nuclear physics data for cutting-edge nuclear technology applications

    International Nuclear Information System (INIS)

    Ganesan, S.; Srivenkatesan, R.; Anek Kumar; Murthy, C.S.R.C.; Dhekne, P.S.

    2005-01-01

    This paper introduces some aspects of online nuclear data services at Mumbai as part of today's technology of sharing knowledge of the recommended numerical nuclear physics data for nuclear applications. The physics foundation for cutting-edge technology applications is significantly strengthened by such knowledge generation and sharing techniques. A BARC server is presently mirroring the nuclear data services of the IAEA, Vienna. The users can get all the nuclear data information much faster from the BARC nuclear data mirror website that is now fully operational. The nuclear community is encouraged to develop the habit of accessing the website for recommended values of nuclear data for use in research and applications. The URL is: www-nds.indcentre.org.in (author)

  13. [The morphological characteristic of the skin lesions inflicted by plastic knives with four cutting edges].

    Science.gov (United States)

    Leonov, S V; Finkel'shtein, V T

    2015-01-01

    The objective of the present work was to study the morphological features of the skin lesions inflicted by the blades of the Fgx Boot Blade I knives having four cutting edges. The study revealed the signs that can be used to distinguish between morphological characteristics of the stab and lacerated wounds having the primary and secondary incisions made by the four-edge blade.

  14. Cutting-Edge High-Power Ultrafast Thin Disk Oscillators

    Directory of Open Access Journals (Sweden)

    Thomas Südmeyer

    2013-04-01

    Full Text Available A growing number of applications in science and industry are currently pushing the development of ultrafast laser technologies that enable high average powers. SESAM modelocked thin disk lasers (TDLs currently achieve higher pulse energies and average powers than any other ultrafast oscillator technology, making them excellent candidates in this goal. Recently, 275 W of average power with a pulse duration of 583 fs were demonstrated, which represents the highest average power so far demonstrated from an ultrafast oscillator. In terms of pulse energy, TDLs reach more than 40 μJ pulses directly from the oscillator. In addition, another major milestone was recently achieved, with the demonstration of a TDL with nearly bandwidth-limited 96-fs long pulses. The progress achieved in terms of pulse duration of such sources enabled the first measurement of the carrier-envelope offset frequency of a modelocked TDL, which is the first key step towards full stabilization of such a source. We will present the key elements that enabled these latest results, as well as an outlook towards the next scaling steps in average power, pulse energy and pulse duration of such sources. These cutting-edge sources will enable exciting new applications, and open the door to further extending the current performance milestones.

  15. Cutting-edge statistical methods for a life-course approach.

    Science.gov (United States)

    Bub, Kristen L; Ferretti, Larissa K

    2014-01-01

    Advances in research methods, data collection and record keeping, and statistical software have substantially increased our ability to conduct rigorous research across the lifespan. In this article, we review a set of cutting-edge statistical methods that life-course researchers can use to rigorously address their research questions. For each technique, we describe the method, highlight the benefits and unique attributes of the strategy, offer a step-by-step guide on how to conduct the analysis, and illustrate the technique using data from the National Institute of Child Health and Human Development Study of Early Child Care and Youth Development. In addition, we recommend a set of technical and empirical readings for each technique. Our goal was not to address a substantive question of interest but instead to provide life-course researchers with a useful reference guide to cutting-edge statistical methods.

  16. Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts

    Directory of Open Access Journals (Sweden)

    Wojtkowiak Dominik

    2018-01-01

    Full Text Available Perforated belts, which are used in vacuum conveyor belts, can have significantly different mechanical properties like strength and elasticity due to a variety of used materials and can have different thickness from very thin (0,7 mm to thick belts (6 mm. In order to design a complex machine for mechanical perforation, which can perforate whole range of belts, it is necessary to research the influence of the cutting edge geometry on the parameters of the perforation process. Three most important parameters, which describe the perforation process are the cutting force, the velocity and the temperature of the piercing punch. The results presented in this paper consider two different types of punching (a piercing punch with the punching die or with the reducer plate and different cutting edge directions, angles, diameters and material properties. Test were made for different groups of composites belts – with polyurethane and polyester fabric, polyamide core or aramid-fibre reinforced polymers. The main goal of this research is to specify effective tools and parameters of the perforation process for each group of composites belts.

  17. Photovoltaics for Buildings Cutting-Edge PV

    International Nuclear Information System (INIS)

    Hayter, S. J.; Martin, R. L.

    1998-01-01

    Photovoltaic (PV) technology development for building-integrated applications (commonly called PV for Buildings) is one of the fastest growing areas in the PV industry. Buildings represent a huge potential market for photovoltaics because they consume approximately two-thirds of the electricity consumed in the US. The PV and buildings industries are beginning to work together to address issues including building codes and standards, integration, after-market servicing, education, and building energy efficiency. One of the most notable programs to encourage development of new PV-for-buildings products is the PV:BONUS program, supported by the US Department of Energy. Demand for these products from building designers has escalated since the program was initiated in 1993. This paper presents a range of PV-for-buildings issues and products that are currently influencing today's PV and buildings markets

  18. Solar: at the cutting edge of innovation

    International Nuclear Information System (INIS)

    Michaut, Cecile; Durand, Yvonnick; Madon, Frederic; Deneux, Benjamin; Joly, Jean-Pierre; Malbranche, Philippe; Dumas, Julien; Mouterde, Jerome; Cuczer, Eric; Barreau, Francois; Molleron, Henri

    2016-01-01

    A set of articles proposes an overview of the dynamic context of solar energy. It first addresses the case of the photovoltaic sector which becomes more competitive, presents high efficiencies, lower costs in a context of higher industrialisation, and of innovation (new fabrication processes, new solar cells, development of two-face cells, use of micro-converters). It then addresses the case of the solar thermal sector with possibilities of application other than hot water production, notably by coupling with photovoltaic or with heat networks. The last article evokes the new applications of photovoltaic, i.e. other than ground-based or roof-based power production. Various applications are envisaged as photovoltaic sensors could be placed on various mobile surfaces: a car, a telephone, and so on

  19. Science versus News: On the Cutting Edge

    Science.gov (United States)

    Kinney, A. L.; French, V.; Villard, R.; Maran, S. P.

    1998-12-01

    This session is to aid communication between scientists and journalists, to motivate astronomers to be active in communicating their science to the public via the press, and to help both astronomers and journalists to understand the constraints under which the other group is operating. The session consists of two talks of about 20 minutes, followed by a panel discussion. The first talk is "What Makes a Topic News?" This segment, by Miles O'Brien of CNN News, takes the AAS audiences behind the scenes in the world of producing science news stories. --- What drives selection of assignments? How does the science reporter convince their editor to cover a story? What factors about television producing help and also hurt getting science subjects across to the public? The second talk is "Public Knowledge on Science: The Growing Gap Between Scientists and the Taxpayer." This presentation by Jon Miller, a public opinion expert will emphasize the problems scientists and society, face in communicating to the public. --- What does the public know about science and scientific method? How much translation is required to communicate with the public to engage their interest without unacceptable compromise of scientific accuracy? The final segment is a panel of both science journalists and astronomers moderated by Steve Maran. Together they will tackle a question that gets to the heart of the Science-Vs-News controversies, "When Should Results Go Public?" Published too soon, science is called "hype"; Published too late, it is no longer "news." Should all results be peer reviewed first, and is that a satisfactory prerequisite? Do scientists take self-serving advantage of the public interest by making announcements before results appear in journals? How do we address the public desire to experience science unfolding and to see real-time data such as planetary science missions? The panelists are Dr. David Helfand, from Columbia University, Dr. Bruce Margon, from the University of

  20. Modelling the cutting edge radius size effect for force prediction in micro milling

    DEFF Research Database (Denmark)

    Bissacco, Giuliano; Hansen, Hans Nørgaard; Jan, Slunsky

    2008-01-01

    This paper presents a theoretical model for cutting force prediction in micro milling, taking into account the cutting edge radius size effect, the tool run out and the deviation of the chip flow angle from the inclination angle. A parameterization according to the uncut chip thickness to cutting...... edge radius ratio is used for the parameters involved in the force calculation. The model was verified by means of cutting force measurements in micro milling. The results show good agreement between predicted and measured forces. It is also demonstrated that the use of the Stabler's rule...... is a reasonable approximation and that micro end mill run out is effectively compensated by the deflections induced by the cutting forces....

  1. Identifying Major Transitions in the Evolution of Lithic Cutting Edge Production Rates.

    Directory of Open Access Journals (Sweden)

    Antoine Muller

    Full Text Available The notion that the evolution of core reduction strategies involved increasing efficiency in cutting edge production is prevalent in narratives of hominin technological evolution. Yet a number of studies comparing two different knapping technologies have found no significant differences in edge production. Using digital analysis methods we present an investigation of raw material efficiency in eight core technologies broadly representative of the long-term evolution of lithic technology. These are bipolar, multiplatform, discoidal, biface, Levallois, prismatic blade, punch blade and pressure blade production. Raw material efficiency is assessed by the ratio of cutting edge length to original core mass. We also examine which flake attributes contribute to maximising raw material efficiency, as well as compare the difference between expert and intermediate knappers in terms of cutting edge produced per gram of core. We identify a gradual increase in raw material efficiency over the broad sweep of lithic technological evolution. The results indicate that the most significant transition in efficiency likely took place with the introduction of small foliate biface, Levallois and prismatic blade knapping, all introduced in the Middle Stone Age / Middle Palaeolithic among early Homo sapiens and Neanderthals. This suggests that no difference in raw material efficiency existed between these species. With prismatic blade technology securely dated to the Middle Palaeolithic, by including the more recent punch and pressure blade technology our results dispel the notion that the transition to the Upper Palaeolithic was accompanied by an increase in efficiency. However, further increases in cutting edge efficiency are evident, with pressure blades possessing the highest efficiency in this study, indicating that late/epi-Palaeolithic and Neolithic blade technologies further increased efficiency.

  2. The Landsat Image Mosaic of Antarctica (LIMA): A Cutting-Edge Way for Students and Teachers to Learn about Antarctica

    Science.gov (United States)

    Campbell, Brian; Bindschadler, Robert

    2009-01-01

    By studying Antarctica via satellite and through ground-truthing research, we can learn where the ice is melting and why. The Landsat Image Mosaic of Antarctica (LIMA), a new and cutting-edge way for scientists, researchers, educators, students, and the public to look at Antarctica, supports this research and allows for unprecedented views of our…

  3. Cutting-edge issues of core-collapse supernova theory

    International Nuclear Information System (INIS)

    Kotake, Kei; Nakamura, Ko; Kuroda, Takami; Takiwaki, Tomoya

    2014-01-01

    Based on multi-dimensional neutrino-radiation hydrodynamic simulations, we report several cutting-edge issues about the long-veiled explosion mechanism of core-collapse supernovae (CCSNe). In this contribution, we pay particular attention to whether three-dimensional (3D) hydrodynamics and/or general relativity (GR) would or would not help the onset of explosions. By performing 3D simulations with spectral neutrino transport, we show that it is more difficult to obtain an explosion in 3D than in 2D. In addition, our results from the first generation of full general relativistic 3D simulations including approximate neutrino transport indicate that GR can foster the onset of neutrino-driven explosions. Based on our recent parametric studies using a light-bulb scheme, we discuss impacts of nuclear energy deposition behind the supernova shock and stellar rotation on the neutrino-driven mechanism, both of which have yet to be included in the self-consistent 3D supernova models. Finally we give an outlook with a summary of the most urgent tasks to extract the information about the explosion mechanisms from multi-messenger CCSN observables

  4. Teaching Introductory Geoscience: A Cutting Edge Workshop Report

    Science.gov (United States)

    Manduca, C.; Tewksbury, B.; Egger, A.; MacDonald, H.; Kirk, K.

    2008-12-01

    Introductory undergraduate courses play a pivotal role in the geosciences. They serve as recruiting grounds for majors and future professionals, provide relevant experiences in geoscience for pre-service teachers, and offer opportunities to influence future policy makers, business people, professionals, and citizens. An introductory course is also typically the only course in geoscience that most of our students will ever take. Because the role of introductory courses is pivotal in geoscience education, a workshop on Teaching Introductory Courses in the 21st Century was held in July 2008 as part of the On the Cutting Edge faculty development program. A website was also developed in conjunction with the workshop. One of the central themes of the workshop was the importance of considering the long-term impact a course should have on students. Ideally, courses can be designed with this impact in mind. Approaches include using the local geology to focus the course and illustrate concepts; designing a course for particular audience (such as Geology for Engineers); creating course features that help students understand and interpret geoscience in the news; and developing capstone projects to teach critical thinking and problem solving skills in a geologic context. Workshop participants also explored strategies for designing engaging activities including exploring with Google Earth, using real-world scenarios, connecting with popular media, or making use of campus features on local field trips. In addition, introductory courses can emphasize broad skills such as teaching the process of science, using quantitative reasoning and developing communication skills. Materials from the workshop as well as descriptions of more than 150 introductory courses and 350 introductory-level activities are available on the website: http://serc.carleton.edu/NAGTWorkshops/intro/index.html.

  5. Renewable energy and environmental technology: Norwegian trends, innovations and cutting-edge companies

    Energy Technology Data Exchange (ETDEWEB)

    Moses, Robert; Criscione, Valeria

    2011-07-01

    This issue of Norway Exports: Renewable Energy and environmental technology looks at Norway's role in one of most important global challenges today. Norway has long placed an emphasis on environmental issues both through global cooperation as well as initiatives on the national, regional and local level. In this issue we present you with two forewords; one from the Norwegian Minister of Petroleum and Energy, Ola Borten Moe, and one from Managing Director INTPOW, Geir Elsebutangen. A brief overview of the most important Norwegian environmental organizations as well as series of articles to give you a more in-depth understanding of Norway's present focus and activities. In the second half of the magazine you will find cutting-edge Norwegian companies within energy and renewable technology that provide their products or services on the global market.(Author)

  6. Virtual Workshop Experiences for Faculty: Lessons Learned from On the Cutting Edge

    Science.gov (United States)

    McDaris, J. R.; Kirk, K. B.; Mogk, D. W.; Bruckner, M. Z.

    2010-12-01

    The On the Cutting Edge professional development program for geoscience faculty has begun offering online workshops as a supplement to its face-to-face workshop series. Following a few initial forays since 2005, Cutting Edge launched a suite of four virtual workshops in 2010: Teaching Geoscience with Service Learning, Understanding the Deep Earth, Designing Effective and Innovative Courses in the Geosciences, and Teaching Geoscience Online. Each workshop was presented over 1-2 weeks and included pre-workshop web postings, synchronous whole-group presentations, live small-group discussions, asynchronous input via threaded discussions or editable web pages, and personal time for reflection and writing. Synchronous sessions were facilitated through the Elluminate software platform which includes tools for viewing presentations, screen sharing, real-time participant response, and an ongoing chat-room discussion. Audio was provided through a separate telephone conference service. In addition, many asynchronous conversations on workshop topics were held via a threaded discussion board on the Cutting Edge website and in Wiki-like, editable web pages designed to support collaborative work. A number of challenges to running online workshops exist, primarily involving participants’ time management. It is difficult for participants to set aside enough time to complete workshop activities when they are still enmeshed in their everyday lives. It also requires new skills for speakers, participants and support staff to prepare web-based materials and navigate the technology required for the online presentations. But there are also a number of opportunities presented by these experiences. With no travel needed, an online workshop is less expensive for participants, which allows Cutting Edge to extend its commitment to providing workshop materials to a wider audience of interested faculty. Also, synchronous sessions can be recorded and posted on the website for broader community

  7. Psychotherapy supervision developments and innovations for the new millennium: contributions from the cutting edge.

    Science.gov (United States)

    Watkins, C Edward

    2014-01-01

    What are some of the most recent, cutting-edge developments and innovations in psychotherapy supervision? And what is their particular significance for supervision now and into its future? In this special supervision issue of the American Journal of Psychotherapy, those questions are considered, and some compelling answers are provided. In what follows, I introduce this special journal issue: (a) define supervision and indicate its purposes; (b) summarize the contents of each innovative paper; and (c) accentuate the significance of each presented development/innovation. The papers contained in this issue boldly speak to supervision's future and provide exciting--and highly profitable--directions to pursue in forever making psychotherapy supervision a far more anchored, accountable, and educational experience.

  8. Conveying Cutting-Edge Discoveries to Nonscientists: Effective Communication with Media

    Science.gov (United States)

    Gupta, Nikhil; Hamilton, Kathleen; Chamot, Joshua

    2013-07-01

    The benefits of using information and news media for disseminating cutting-edge scientific discoveries to the public are well known. Taxpayers and lawmakers need to be informed about the implications of public investments, young students' interest can be molded toward science- and technology-based careers, and public awareness of important issues can be raised by effectively using media. However, communication with news media is different from the means commonly used by scientists—journal publications and conference presentations. This article is intended to provide information on three basic aspects of media interactions—why, what, and how to communicate. The increasing importance of this mode of dissemination in this information age cannot be ignored; rather, it can be effectively utilized for educating a wider population base.

  9. Research symposium proceedings. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    THE research symposium was organized to present the cutting edge research for PET by individuals from leading institutions throughout the world. The Institute for Clinical PET (ICP) has focused its annual meeting on the clinical applications of PET.

  10. Effect of cutting edge radius on surface roughness in diamond tool turning of transparent MgAl2O4 spinel ceramic

    Science.gov (United States)

    Yue, Xiaobin; Xu, Min; Du, Wenhao; Chu, Chong

    2017-09-01

    Transparent magnesium aluminate spinel (MgAl2O4) ceramic is one of an important optical materials. However, due to its pronounced hardness and brittleness, the optical machining of this material is very difficult. Diamond turning has advantages over the grinding process in flexibility and material removal rate. However, there is a lack of research that could support the use of diamond turning technology in the machining of MgAl2O4 spinel ceramic. Using brittle-ductile transition theory of brittle material machining, this work provides critical information that may help to realize ductile-regime turning of MgAl2O4 spinel ceramic. A characterization method of determination the cutting edge radius is introduced here. Suitable diamond tools were measured for sharpness and then chosen from a large number of candidate tools. The influence of rounded cutting edges on surface roughness of the MgAl2O4 spinel ceramic is also investigated. These results indicate that surface quality of MgAl2O4 spinel is relate to the radius of diamond tool's cutting edge, cutting speed, and feed rate. Sharp diamond tools (small radius of cutting edge) facilitated ductile-regime turning of MgAl2O4 spinel and shows great potential to reduce surface roughness and produce smoother final surface.

  11. Getting Started in Academic Careers: On the Cutting Edge Resources for Graduate Students, Postdoctoral Fellows, and Early Career Faculty

    Science.gov (United States)

    MacDonald, R.; Ormand, C.; Manduca, C. A.; Wright-Dunbar, R.; Allen-King, R.

    2007-12-01

    The professional development program,'On the Cutting Edge', offers on-line resources and annual multi-day workshops for graduate students and post-doctoral fellows interested in pursuing academic careers. Pre- workshop surveys reveal that early career faculty, post-docs, and graduate students have many questions about teaching (e.g., what are effective teaching strategies, how to design a course, how to prepare a syllabus, how to teach large courses), research (e.g., initiate and fund future research, set up and manage a lab, obtain equipment), and career management (e.g., understand tenure requirements, balance all it all). The graduate students and post-docs also have questions about jobs and the job search process. Their questions show a lack of familiarity with the nature of academic positions at different kinds of educational institutions (two-year colleges, primarily undergraduate institutions, and research universities). In particular, they are uncertain about what educational setting will best fit their values and career goals and how teaching loads and research expectations vary by institution. Common questions related to the job search process include where to find job listings (the most common question in recent years), when to start the job search process, how to stand out as an applicant, and how to prepare for interviews. Both groups have questions about how to develop new skills: how to develop, plan and prepare a new course (without it taking all of their time), how to expand beyond their PhD (or postdoc) research projects, how to develop a research plan, and where to apply for funding. These are important topics for advisors to discuss with all of their students and postdocs who are planning on careers in academia. On the Cutting Edge offers workshops and web resources to help current and future faculty navigate these critical stages of their careers. The four-day workshop for Early Career Geoscience Faculty: Teaching, Research, and Managing Your

  12. Cleaning capacity of hybrid instrumentation technique using reamer with alternating cutting edges system files: Histological analysis

    Directory of Open Access Journals (Sweden)

    Emilio Carlos Sponchiado Junior

    2014-01-01

    Full Text Available Aim: The aim of the following study is to evaluate the cleaning capacity of a hybrid instrumentation technique using Reamer with Alternating Cutting Edges (RaCe system files in the apical third of mesial roots of mandibular molars. Materials and Methods: Twenty teeth were selected and separated into two groups (n = 20 according to instrumentation technique as follows: BioRaCe - chemomechanical preparation with K-type files #10 and #15; and files BioRaCe BR0, BR1, BR2, BR3, and BR4; HybTec - hybrid instrumentation technique with K-type files #10 and #15 in the working length, #20 at 2 mm, #25 at 3 mm, cervical preparation with Largo burs #1 and #2; apical preparation with K-type files #15, #20, and #25 and RaCe files #25.04 and #30.04. The root canals were irrigated with 1 ml of 2.5% sodium hypochlorite at each change of instrument. The specimens were histologically processed and photographed under light optical microscope. The images were inserted onto an integration grid to count the amount of debris present in the root canal. Results: BioRaCe presented the highest percentage of debris in the apical third, however, with no statistically significant difference for HybTec (P > 0.05. Conclusions: The hybrid technique presented similar cleaning capacity as the technique recommended by the manufacturer.

  13. Improving Climate Science Education by Supporting Faculty: Climate Programs from On the Cutting Edge

    Science.gov (United States)

    Wiese, K.; Kirk, K. B.; Manduca, C. A.; Shellito, L. J.; Sztein, E.; Bruckner, M. Z.

    2011-12-01

    Students arrive in our classrooms with a wide range of viewpoints on climate change. Some carry misconceptions resulting from media portrayal of the subject; others have strong feelings about the policy of climate change that overshadow their understanding of the science; while some already grasp the basics of climate science and are thirsty for a more in-depth treatment. In any of these cases, the topic of climate change is likely to be of high interest to students and will challenge faculty to be well-versed in the science, the policy, and in effective pedagogic strategies. The On the Cutting Edge project continues its emphasis on climate science, climate change and energy resources with ongoing professional development events. An underlying theme of all of these events is to help faculty be more effective teachers by providing up-to-date science, examples of promising pedagogies and a forum to network with others who teach similar subjects. A monthly webinar and book club series about teaching climate and energy was offered throughout the 2010-2011 academic year. These one-hour events allowed faculty a convenient way to learn about science topics such as carbon capture and storage, nuclear energy, thermohaline circulation, alternative energy, or the energy-water nexus. Some of the webinars focused on pedagogic approaches, including teaching with climate models, dealing with misconceptions, or using local energy issues for a semester-long jigsaw project. Webinar participants reported that they could expand their teaching to include these topics, they increased their comfort level in presenting those subjects and answering student questions, and they learned where to turn for additional references. An online workshop, Teaching about Earth's Climate Using Data and Numerical Models, was held in October 2010. Participants learned about different types of models, the strategies for teaching with models and how to use online datasets. The workshop also provided

  14. Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry

    International Nuclear Information System (INIS)

    Hua Jiang; Shivpuri, Rajiv; Cheng Xiaomin; Bedekar, Vikram; Matsumoto, Yoichi; Hashimoto, Fukuo; Watkins, Thomas R.

    2005-01-01

    Residual stress on the machined surface and the subsurface is known to influence the service quality of a component, such as fatigue life, tribological properties, and distortion. Therefore, it is essential to predict and control it for enhanced performance. In this paper, a newly proposed hardness based flow stress model is incorporated into an elastic-viscoplastic finite element model of hard turning to analyze process variables that affect the residual stress profile of the machined surface. The effects of cutting edge geometry and workpiece hardness as well as cutting conditions, such as feed rate and cutting speed, are investigated. Numerical analysis shows that hone edge plus chamfer cutting edge and aggressive feed rate help to increase both compressive residual stress and penetration depth. These predictions are validated by face turning experiments which were conducted using a chamfer with hone cutting edge for different material hardness and cutting parameters. The residual stresses under the machined surface are measured by X-ray diffraction/electropolishing method. A maximum circumferential residual stress of about 1700 MPa at a depth of 40 μm is reached for hardness of 62 HRc and feed rate of 0.56 mm/rev. This represents a significant increase from previously reported results in literatures. It is found from this analysis that using medium hone radius (0.02-0.05 mm) plus chamfer is good for keeping tool temperature and cutting force low, while obtaining desired residual stress profile

  15. Cutting edge issues in allergy and clinical immunology.

    Science.gov (United States)

    Matthias, Torsten; Shoenfeld, Yehuda

    2007-02-01

    Approximately every 5 yr, Clinical Reviews in Allergy and Immunology deviates from its usual practice of publishing volumes devoted to one theme to including papers that cover a range of subjects. This issue is one such exception and arose following a symposium at the International Institute for Research in Autoimmune Diseases named AESKU.KIPP Institute at their Wendelsheim facility. The AESKU.KIPP Institute was a particularly venue because it was initially established by a German diagnostic company and a Swiss benefactor, Karl- Heinz Kipp. The goal of the Institute was to develop a unique atmosphere to encourage original research in the field of autoimmunity and clinical immunology. The thought was to create an institute where young scientists from throughout the world could come for short periods of time to learn newer methodologies in both clinical immunology and also molecular biology. This theme contains several of the papers presented at the opening of the Institute and are incorporated herein because they focus on several unique aspects of clinical immunology, often referred to as the mosaic of autoimmunity.

  16. Study of Cutting Edge Temperature and Cutting Force of End Mill Tool in High Speed Machining

    Directory of Open Access Journals (Sweden)

    Kiprawi Mohammad Ashaari

    2017-01-01

    Full Text Available A wear of cutting tools during machining process is unavoidable due to the presence of frictional forces during removing process of unwanted material of workpiece. It is unavoidable but can be controlled at slower rate if the cutting speed is fixed at certain point in order to achieve optimum cutting conditions. The wear of cutting tools is closely related with the thermal deformations that occurred between the frictional contact point of cutting edge of cutting tool and workpiece. This research paper is focused on determinations of relationship among cutting temperature, cutting speed, cutting forces and radial depth of cutting parameters. The cutting temperature is determined by using the Indium Arsenide (InAs and Indium Antimonide (InSb photocells to measure infrared radiation that are emitted from cutting tools and cutting forces is determined by using dynamometer. The high speed machining process is done by end milling the outer surface of carbon steel. The signal from the photocell is digitally visualized in the digital oscilloscope. Based on the results, the cutting temperature increased as the radial depth and cutting speed increased. The cutting forces increased when radial depth increased but decreased when cutting speed is increased. The setup for calibration and discussion of the experiment will be explained in this paper.

  17. Impact of the On the Cutting Edge Professional Development Program on U.S. Geoscience Faculty

    Science.gov (United States)

    Manduca, C. A.; Iverson, E. A.; Czujko, R.; Macdonald, H.; Mogk, D. W.; Tewksbury, B. J.; McLaughlin, J.; Sanford, C.; Greenseid, L.; Luxenberg, M.

    2011-12-01

    Transforming STEM education from a dominantly lecture-based format focused on facts to classrooms where students engage with the process of understanding the world through science is a primary goal of faculty development. On the Cutting Edge seeks to support this transformation by using workshops and a website to build a community of geoscience faculty who learn from one another. In order to assess the impact of the On the Cutting Edge program, we surveyed 5917 U.S. geoscience faculty in 2009 and received 2874 completed responses (49% response rate). We looked at the differences in responses between workshop participants who also use the website, website users who have not attended a Cutting Edge workshop, and survey respondents who had neither attended a Cutting Edge workshop nor used the Cutting Edge website. The number of respondents who had attended a Cutting Edge workshop and had not used the website was too small to analyze. Courses described by Cutting Edge workshop participants make significantly less use of lecture and more use of small group discussion and in-class activities. While all faculty respondents routinely update their courses, workshop participants are more likely to have changed their teaching methods in the two years leading up to the survey. When making changes to their teaching methods, workshop participants are more likely than other populations to seek information about teaching on the web, consult journal articles about teaching, and seek advice from colleagues outside their department and from nationally known leaders in geoscience education. Workshop participants are also more likely to tell a colleague when they do something that is particularly successful in class. End-of-workshop survey and follow-up interview data indicate that participants leave workshops reinvigorated, with a new or renewed commitment to student-centered teaching, and that they make use of the website as they implement ideas for changing their teaching following

  18. Mechanism of cutting edge chipping and its suppression in diamond turning of copper

    International Nuclear Information System (INIS)

    Shimada, Shoichi; Higuchi, Masahiro; Kaneeda, Toshiaki; Higashi, Yasuo; Yokomizo, Seiichi

    2005-01-01

    This paper investigates the mechanism of cutting edge chipping in diamond turning of copper in terms of the change in Hertzian strength of diamond specimens subjected to thermal histories. The study suggests that the strength of diamond decreases as the result of the propagation of existing surface micro cracks caused by the thermo-chemical erosion of oxygen at the crack tips. The catalytic reaction involving copper is also shown to accelerate the crack propagation. Then, a cutting technique of reduced oxygen atmosphere is proposed to suppress the cutting edge chipping in diamond turning of copper over an extended cutting time. (author)

  19. Strength on cut edge and ground edge glass beams with the failure analysis method

    Directory of Open Access Journals (Sweden)

    Stefano Agnetti

    2013-10-01

    Full Text Available The aim of this work is the study of the effect of the finishing of the edge of glass when it has a structural function. Experimental investigations carried out for glass specimens are presented. Various series of annealed glass beam were tested, with cut edge and with ground edge. The glass specimens are tested in four-point bending performing flaw detection on the tested specimens after failure, in order to determine glass strength. As a result, bending strength values are obtained for each specimen. Determining some physical parameter as the depth of the flaw and the mirror radius of the fracture, after the failure of a glass element, it could be possible to calculate the failure strength of that.The experimental results were analyzed with the LEFM theory and the glass strength was analyzed with a statistical study using two-parameter Weibull distribution fitting quite well the failure stress data. The results obtained constitute a validation of the theoretical models and show the influence of the edge processing on the failure strength of the glass. Furthermore, series with different sizes were tested in order to evaluate the size effect.

  20. Bringing cutting-edge Earth and ocean sciences to under-served and rural audiences through informal science education

    Science.gov (United States)

    Cooper, S. K.; Petronotis, K. E.; Ferraro, C.; Johnson, K. T. M.; Yarincik, K.

    2017-12-01

    The International Ocean Discovery Program (IODP) is an international marine research collaboration that explores Earth's history and dynamics using ocean-going research platforms to recover data recorded in seafloor sediments and rocks and to monitor subseafloor environments. The JOIDES Resolution is the flagship vessel of IODP and is operated by the National Science Foundation. It is an inspirational hook for STEM Earth and ocean topics for children and the general public of all ages, but is not easily accessible due to its international travels and infrequent U.S. port calls. In response, a consortium of partners has created the Pop-Up/Drill Down Science project. The multi-year project, funded by NSF's Advancing Informal Science Learning program, aims to bring the JR and its science to under-served and rural populations throughout the country. Consisting of an inflatable walk-through ship, a multi-media experience, a giant interactive seafloor map and a series of interactive exhibit kiosks, the exhibit, entitled, In Search of Earth's Secrets: A Pop-Up Science Encounter, will travel to 12 communities throughout the next four years. In each community, the project will partner with local institutions like public libraries and small museums as hosts and to train local Girl Scouts to serve as exhibit facilitators. By working with local communities to select events and venues for pop-up events, the project hopes to bring cutting edge Earth and ocean science in creative new ways to underserved populations and inspire diverse audiences to explore further. This presentation will provide details of the project's goals, objectives and development and provide avenues to become involved.

  1. Mobile ad hoc networking the cutting edge directions

    CERN Document Server

    Basagni, Stefano; Giordano, Silvia; Stojmenovic, Ivan

    2013-01-01

    ""An excellent book for those who are interested in learning the current status of research and development . . . [and] who want to get a comprehensive overview of the current state-of-the-art.""-E-Streams This book provides up-to-date information on research and development in the rapidly growing area of networks based on the multihop ad hoc networking paradigm. It reviews all classes of networks that have successfully adopted this paradigm, pointing out how they penetrated the mass market and sparked breakthrough research. Covering both physical issues and applica

  2. Plasma-aided nanofabrication: where is the cutting edge?

    International Nuclear Information System (INIS)

    Ostrikov, K; Murphy, A B

    2007-01-01

    Plasma-aided nanofabrication is a rapidly expanding area of research spanning disciplines ranging from physics and chemistry of plasmas and gas discharges to solid state physics, materials science, surface science, nanoscience and nanotechnology and related engineering subjects. The current status of the research field is discussed and examples of superior performance and competitive advantage of plasma processes and techniques are given. These examples are selected to represent a range of applications of two major types of plasmas suitable for nanoscale synthesis and processing, namely thermally non-equilibrium and thermal plasmas. Major concepts and terminology used in the field are introduced. The paper also pinpoints the major challenges facing plasma-aided nanofabrication and identifies some emerging topics for future research. (editorial review)

  3. Consider outsourcing IT projects when cutting-edge technology, specialized focus are needed.

    Science.gov (United States)

    1999-05-01

    Looking outside to meet information technology needs proves a smart way to avert extra staffing costs. Kaiser Permanente saves thousands each year by contracting out cutting-edge IT projects instead of hiring more full-time staff it doesn't need. Learn how the organization incorporates outsourcing and other temporary work methods into its IT staffing strategy.

  4. Cutting-Edge Technologies and Social Media Use in Higher Education

    Science.gov (United States)

    Benson, Vladlena, Ed.; Morgan, Stephanie

    2014-01-01

    The inclusion of social media in higher education has transformed the way instructors teach and students learn. In order to effectively reach their students in this networked world, teachers must learn to utilize the latest technologies in their classrooms. "Cutting-Edge Technologies and Social Media Use in Higher Education" brings…

  5. CRISPR/Cas9: at the cutting edge of hepatology

    Science.gov (United States)

    Pankowicz, Francis P; Jarrett, Kelsey E; Lagor, William R; Bissig, Karl-Dimiter

    2018-01-01

    Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)/Cas9 genome engineering has revolutionised biomedical science and we are standing on the cusp of medical transformation. The therapeutic potential of this technology is tremendous, however, its translation to the clinic will be challenging. In this article, we review recent progress using this genome editing technology and explore its potential uses in studying and treating diseases of the liver. We discuss the development of new research tools and animal models as well as potential clinical applications, strategies and challenges. PMID:28487442

  6. Kinect, a Novel Cutting Edge Tool in Pavement Data Collection

    Science.gov (United States)

    Mahmoudzadeh, A.; Firoozi Yeganeh, S.; Golroo, A.

    2015-12-01

    Pavement roughness and surface distress detection is of interest of decision makers due to vehicle safety, user satisfaction, and cost saving. Data collection, as a core of pavement management systems, is required for these detections. There are two major types of data collection: traditional/manual data collection and automated/semi-automated data collection. This paper study different non-destructive tools in detecting cracks and potholes. For this purpose, automated data collection tools, which have been utilized recently are discussed and their applications are criticized. The main issue is the significant amount of money as a capital investment needed to buy the vehicle. The main scope of this paper is to study the approach and related tools that not only are cost-effective but also precise and accurate. The new sensor called Kinect has all of these specifications. It can capture both RGB images and depth which are of significant use in measuring cracks and potholes. This sensor is able to take image of surfaces with adequate resolution to detect cracks along with measurement of distance between sensor and obstacles in front of it which results in depth of defects. This technology has been very recently studied by few researchers in different fields of studies such as project management, biomedical engineering, etc. Pavement management has not paid enough attention to use of Kinect in monitoring and detecting distresses. This paper is aimed at providing a thorough literature review on usage of Kinect in pavement management and finally proposing the best approach which is cost-effective and precise.

  7. KINECT, A NOVEL CUTTING EDGE TOOL IN PAVEMENT DATA COLLECTION

    Directory of Open Access Journals (Sweden)

    A. Mahmoudzadeh

    2015-12-01

    Full Text Available Pavement roughness and surface distress detection is of interest of decision makers due to vehicle safety, user satisfaction, and cost saving. Data collection, as a core of pavement management systems, is required for these detections. There are two major types of data collection: traditional/manual data collection and automated/semi-automated data collection. This paper study different non-destructive tools in detecting cracks and potholes. For this purpose, automated data collection tools, which have been utilized recently are discussed and their applications are criticized. The main issue is the significant amount of money as a capital investment needed to buy the vehicle. The main scope of this paper is to study the approach and related tools that not only are cost-effective but also precise and accurate. The new sensor called Kinect has all of these specifications. It can capture both RGB images and depth which are of significant use in measuring cracks and potholes. This sensor is able to take image of surfaces with adequate resolution to detect cracks along with measurement of distance between sensor and obstacles in front of it which results in depth of defects. This technology has been very recently studied by few researchers in different fields of studies such as project management, biomedical engineering, etc. Pavement management has not paid enough attention to use of Kinect in monitoring and detecting distresses. This paper is aimed at providing a thorough literature review on usage of Kinect in pavement management and finally proposing the best approach which is cost-effective and precise.

  8. Cutting-Edge: Integrating Students with Intellectual and Developmental Disabilities into a 4-Year Liberal Arts College

    Science.gov (United States)

    Hafner, Dedra; Moffatt, Courtney; Kisa, Nutullah

    2011-01-01

    Cutting-Edge provides inclusion in college for students with intellectual disabilities (SWID). Cutting-Edge students attended college by taking undergraduate courses, resided in student housing, and engaged in student-life events as well as pursued community service, internships and employment. Undergraduate students were the best means to teach…

  9. From cutting-edge pointwise cross-section to groupwise reaction rate: A primer

    Science.gov (United States)

    Sublet, Jean-Christophe; Fleming, Michael; Gilbert, Mark R.

    2017-09-01

    The nuclear research and development community has a history of using both integral and differential experiments to support accurate lattice-reactor, nuclear reactor criticality and shielding simulations, as well as verification and validation efforts of cross sections and emitted particle spectra. An important aspect to this type of analysis is the proper consideration of the contribution of the neutron spectrum in its entirety, with correct propagation of uncertainties and standard deviations derived from Monte Carlo simulations, to the local and total uncertainty in the simulated reactions rates (RRs), which usually only apply to one application at a time. This paper identifies deficiencies in the traditional treatment, and discusses correct handling of the RR uncertainty quantification and propagation, including details of the cross section components in the RR uncertainty estimates, which are verified for relevant applications. The methodology that rigorously captures the spectral shift and cross section contributions to the uncertainty in the RR are discussed with quantified examples that demonstrate the importance of the proper treatment of the spectrum profile and cross section contributions to the uncertainty in the RR and subsequent response functions. The recently developed inventory code FISPACT-II, when connected to the processed nuclear data libraries TENDL-2015, ENDF/B-VII.1, JENDL-4.0u or JEFF-3.2, forms an enhanced multi-physics platform providing a wide variety of advanced simulation methods for modelling activation, transmutation, burnup protocols and simulating radiation damage sources terms. The system has extended cutting-edge nuclear data forms, uncertainty quantification and propagation methods, which have been the subject of recent integral and differential, fission, fusion and accelerators validation efforts. The simulation system is used to accurately and predictively probe, understand and underpin a modern and sustainable understanding

  10. A cutting-edge solution for 1µm laser metal processing

    Science.gov (United States)

    Baumbach, N.; Kühl, P.; Karam, J.; Jonkers, J.; Villarreal-Saucedo, F.; Reyes, M.

    2017-02-01

    The recent 1μm-laser cutting market is dominated by fiber and disk lasers due to their excellent beam quality of below 4mm*mrad. Teradiode's 4kW direct diode laser source achieves similar beam quality while having a different beam shape and shorter wavelengths which are known for higher absorption rates at the inclined front of the cutting keyhole. Research projects, such as the HALO Project, have additionally shown that polarized radiation and beams with shapes different from the typical LG00 lead to improved cut quality for ferrous and non-ferrous metals. [1] Diode laser have the inherent property of not being sensitive to back reflection which brings advantages in cutting high-reflective materials. The II-VI HIGHYAG laser cutting head BIMO-FSC offers the unique feature of machine controlled and continuous adjustment of both the focus diameter and the focus position. This feature is proven to be beneficial for cutting and piercing with high speed and small hole diameters. In addition, the optics are designed for lowest focus shift. As a leading laser processing head manufacturer, II-VI HIGHYAG qualified its BIMO-FSC MZ (M=magnification, Z=focus position) cutting head for Teradiode's 4kW direct diode laser source to offer a cutting-edge solution for highpower laser cutting. Combining the magnification ability of the cutting head with this laser source, customers experience strong advantages in cutting metals in broad thickness ranges. Thicknesses up to 25mm mild steel can easily be cut with excellent edge quality. Furthermore, a new optical setup equivalent to an axicon with a variable axicon angle is demonstrated which generates variable sized ring spots. The setup provides new degrees of freedom to tailor the energy distribution for even higher productivity and quality.

  11. The cutting-edge training modalities and educational platforms for accredited surgical training: A systematic review.

    Science.gov (United States)

    Forgione, Antonello; Guraya, Salman Y

    2017-01-01

    Historically, operating room (OR) has always been considered as a stand-alone trusted platform for surgical education and training. However, concerns about financial constraints, quality control, and patient safety have urged the surgical educators to develop more cost-effective, surgical educational platforms that can be employed outside the OR. Furthermore, trained surgeons need to regularly update their surgical skills to keep abreast with the emerging surgical technologies. This research aimed to explore the value of currently available modern surgical tools that can be used outside the OR and also elaborates the existing laparoscopic surgical training programs in world-class centers across the globe with a view to formulate a blended and unified structured surgical training program. Several data sources were searched using MeSH terms "Laparoscopic surgery" and "Surgical training" and "Surgical curriculum" and "fundamentals of endoscopic surgery" and "fundamentals of laparoscopic surgery" and "Telementoring" and "Box trainer." The eligibility criteria used in data extraction searched for original and review articles and by excluding the editorial articles, short communications, conference proceedings, personal view, and commentaries. Data synthesis and data analysis were done by reviewing the initially retrieved 211 articles. Irrelevant and duplicate and redundant articles were excluded from the study. Finally, 12 articles were selected for this systematic review. Data results showed that a myriad of cutting-edge technical innovations have provided modern surgical training tools such as the simulation-based mechanical and virtual reality simulators, animal and cadaveric labs, telementoring, telerobotic-assisted surgery, and video games. Surgical simulators allow the trainees to acquire surgical skills in a tension-free environment without supervision or time constraints. The existing world-renowned surgical training centers employ various clusters of training

  12. Cutting Edge

    DEFF Research Database (Denmark)

    Hansen, Camilla H F; Yurkovetskiy, Leonid A; Chervonsky, Alexander V

    2016-01-01

    Polyglandular autoimmune inflammation accompanies type 1 diabetes (T1D) in NOD mice, affecting organs like thyroid and salivary glands. Although commensals are not required for T1D progression, germ-free (GF) mice had a very low degree of sialitis, which was restored by colonization with select m...

  13. Analysis of femtosecond laser assisted capsulotomy cutting edges and manual capsulorhexis using environmental scanning electron microscopy.

    Science.gov (United States)

    Serrao, Sebastiano; Lombardo, Giuseppe; Desiderio, Giovanni; Buratto, Lucio; Schiano-Lomoriello, Domenico; Pileri, Marco; Lombardo, Marco

    2014-01-01

    Purpose. To investigate the structure and irregularity of the capsulotomy cutting edges created by two femtosecond (FS) laser platforms in comparison with manual continuous circular capsulorhexis (CCC) using environmental scanning electron microscopy (eSEM). Methods. Ten anterior capsulotomies were obtained using two different FS laser cataract platforms (LenSx, n = 5, and Victus, n = 5). In addition, five manual CCC (n = 5) were obtained using a rhexis forceps. The specimens were imaged by eSEM (FEI Quanta 400, OR, USA). Objective metrics, which included the arithmetic mean deviation of the surface (Sa) and the root-mean-square deviation of the surface (Sq), were used to evaluate the irregularity of both the FS laser capsulotomies and the manual CCC cutting edges. Results. Several microirregularities were shown across the FS laser capsulotomy cutting edges. The edges of manually torn capsules were shown, by comparison of Sa and Sq values, to be smoother (P < 0.05) than the FS laser capsulotomy edges. Conclusions. Work is needed to understand whether the FS laser capsulotomy edge microirregularities, not seen in manual CCC, may act as focal points for the concentration of stress that would increase the risk of capsular tear during phacoemulsification as recently reported in the literature.

  14. Analysis of Femtosecond Laser Assisted Capsulotomy Cutting Edges and Manual Capsulorhexis Using Environmental Scanning Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Sebastiano Serrao

    2014-01-01

    Full Text Available Purpose. To investigate the structure and irregularity of the capsulotomy cutting edges created by two femtosecond (FS laser platforms in comparison with manual continuous circular capsulorhexis (CCC using environmental scanning electron microscopy (eSEM. Methods. Ten anterior capsulotomies were obtained using two different FS laser cataract platforms (LenSx, n=5, and Victus, n=5. In addition, five manual CCC (n=5 were obtained using a rhexis forceps. The specimens were imaged by eSEM (FEI Quanta 400, OR, USA. Objective metrics, which included the arithmetic mean deviation of the surface (Sa and the root-mean-square deviation of the surface (Sq, were used to evaluate the irregularity of both the FS laser capsulotomies and the manual CCC cutting edges. Results. Several microirregularities were shown across the FS laser capsulotomy cutting edges. The edges of manually torn capsules were shown, by comparison of Sa and Sq values, to be smoother (P<0.05 than the FS laser capsulotomy edges. Conclusions. Work is needed to understand whether the FS laser capsulotomy edge microirregularities, not seen in manual CCC, may act as focal points for the concentration of stress that would increase the risk of capsular tear during phacoemulsification as recently reported in the literature.

  15. Development programs of cutting-edge technologies for measurement and detection of nuclear material for safeguards and security

    International Nuclear Information System (INIS)

    Seya, Michio; Wakabayashi, Shuji; Naoi, Yosuke; Ohkubo, Michiaki; Senzaki, Masao

    2011-01-01

    The Integrated Support Center for Nuclear Nonproliferation and Nuclear Security ('ISCN', hereafter) of Japan Atomic Energy Agency (JAEA) has development programs of cutting-edge technologies for measurement and detection of nuclear materials for nuclear safeguards and security, under the sponsorship of Japanese government (MEXT: Ministry of Education, Culture, Sports, Science and Technology). ISCN started development programs of the following technologies this year. (1) NRF (Nuclear Resonance Fluorescence) NDA technology using laser Compton scattering (LCS) gamma-rays, (2) Alternative to 3 He neutron detection technology using inorganic solid scintillator. ISCN is also going to conduct a demonstration test of a spent fuel Pu-NDA system that is to be developed by LANL (Los Alamos National Laboratory) using very sophisticated neutron measurement technologies, under JAEA/USDOE cooperation agreement. This presentation shows the above programs of ISCN. (author)

  16. From cutting-edge pointwise cross-section to groupwise reaction rate: A primer

    Directory of Open Access Journals (Sweden)

    Sublet Jean-Christophe

    2017-01-01

    Full Text Available The nuclear research and development community has a history of using both integral and differential experiments to support accurate lattice-reactor, nuclear reactor criticality and shielding simulations, as well as verification and validation efforts of cross sections and emitted particle spectra. An important aspect to this type of analysis is the proper consideration of the contribution of the neutron spectrum in its entirety, with correct propagation of uncertainties and standard deviations derived from Monte Carlo simulations, to the local and total uncertainty in the simulated reactions rates (RRs, which usually only apply to one application at a time. This paper identifies deficiencies in the traditional treatment, and discusses correct handling of the RR uncertainty quantification and propagation, including details of the cross section components in the RR uncertainty estimates, which are verified for relevant applications. The methodology that rigorously captures the spectral shift and cross section contributions to the uncertainty in the RR are discussed with quantified examples that demonstrate the importance of the proper treatment of the spectrum profile and cross section contributions to the uncertainty in the RR and subsequent response functions. The recently developed inventory code FISPACT-II, when connected to the processed nuclear data libraries TENDL-2015, ENDF/B-VII.1, JENDL-4.0u or JEFF-3.2, forms an enhanced multi-physics platform providing a wide variety of advanced simulation methods for modelling activation, transmutation, burnup protocols and simulating radiation damage sources terms. The system has extended cutting-edge nuclear data forms, uncertainty quantification and propagation methods, which have been the subject of recent integral and differential, fission, fusion and accelerators validation efforts. The simulation system is used to accurately and predictively probe, understand and underpin a modern and

  17. The cutting-edge training modalities and educational platforms for accredited surgical training: A systematic review

    Directory of Open Access Journals (Sweden)

    Antonello Forgione

    2017-01-01

    Full Text Available Background: Historically, operating room (OR has always been considered as a stand-alone trusted platform for surgical education and training.However, concerns about financial constraints, quality control, and patient safety have urged the surgical educators to develop more cost-effective, surgical educational platforms that can be employed outside the OR. Furthermore, trained surgeons need to regularly update their surgical skills to keep abreast with the emerging surgical technologies. This research aimed to explore the value of currently available modern surgical tools that can be used outside the OR and also elaborates the existing laparoscopic surgical training programs in world-class centers across the globe with a view to formulate a blended and unified structured surgical training program. Materials and Methods: Several data sources were searched using MeSH terms “Laparoscopic surgery” and “Surgical training” and “Surgical curriculum” and “fundamentals of endoscopic surgery” and “fundamentals of laparoscopic surgery” and “Telementoring” and “Box trainer.” The eligibility criteria used in data extraction searched for original and review articles and by excluding the editorial articles, short communications, conference proceedings, personal view, and commentaries. Data synthesis and data analysis were done by reviewing the initially retrieved 211 articles. Irrelevant and duplicate and redundant articles were excluded from the study. Results: Finally, 12 articles were selected for this systematic review. Data results showed that a myriad of cutting-edge technical innovations have provided modern surgical training tools such as the simulation-based mechanical and virtual reality simulators, animal and cadaveric labs, telementoring, telerobotic-assisted surgery, and video games. Surgical simulators allow the trainees to acquire surgical skills in a tension-free environment without supervision or time constraints

  18. Teaching Service Learning in the Geosciences: An On the Cutting Edge Workshop Report

    Science.gov (United States)

    Bruckner, M. Z.; Laine, E. P.; Mogk, D. W.; O'Connell, S.; Kirk, K. B.

    2010-12-01

    Service learning is an instructional method that combines community service and academic instruction within the context of an established academic course. It is a particularly effective approach that uses active and experiential learning to develop the academic skills required of a course of study and to simultaneously address authentic community needs. Service learning projects can energize and motivate students by engaging a sense of civic responsibility by working in concert with community partners. The geosciences provide abundant opportunities to develop service learning projects on topics related to natural hazards, resources, land use, water quality, community planning, public policy, and education (K-12 and public outreach). To explore the opportunities of teaching service learning in the geosciences, the On the Cutting Edge program convened an online workshop in February 2010. The goals of the workshop were to: 1) introduce the principles and practices of effective service learning instructional activities; 2) provide examples of successful service learning projects and practical advice about "what works;" 3) provide participants with the opportunity to design, develop, and refine their own service learning courses or projects; 4) develop collections of supporting resources related to the pedagogy of service learning; and 5) support a community of scholars interested in continued work on service learning in the geoscience curriculum. The workshop consisted of a series of web-based synchronous and asynchronous sessions, including presentations from experienced practitioners of service learning, panel discussions, threaded discussions, and editable web pages used to develop new material for the website. Time was also provided for small group and individual work and for participants to peer-review each others' service learning projects and to revise their own activities based on reviewer comments. Insights from the workshop were integrated into new web pages

  19. Aircrew Performance Cutting-Edge Tech: Emerging Human Performance Enhancement Technology Vision in Support of Operational Military Aviation Strategy

    National Research Council Canada - National Science Library

    Belland, Kris

    2002-01-01

    Using cutting-edge technology to create a human factors advantage in military operations will contribute to success on the battlefield of the future whether below the surface, on the surface, in the air, or in space...

  20. Aircrew Performance Cutting-Edge Technology: Emerging Human Performance Enhancement Technology Vision in Support of Operational Military Aviation Strategy

    National Research Council Canada - National Science Library

    Belland, Kris M

    2003-01-01

    Using cutting-edge technology to create a human factors advantage in military operations will contribute to success on the battlefield of the future whether below the surface, on the surface, in the air, or in space...

  1. Available Tools and Challenges Classifying Cutting-Edge and Historical Astronomical Documents

    Science.gov (United States)

    Lagerstrom, Jill

    2015-08-01

    The STScI Library assists the Science Policies Division in evaluating and choosing scientific keywords and categories for proposals for the Hubble Space Telescope mission and the upcoming James Webb Space Telescope mission. In addition we are often faced with the question “what is the shape of the astronomical literature?” However, subject classification in astronomy in recent times has not been cultivated. This talk will address the available tools and challenges of classifying cutting-edge as well as historical astronomical documents. In at the process, we will give an overview of current and upcoming practices of subject classification in astronomy.

  2. Analyses of Effects of Cutting Parameters on Cutting Edge Temperature Using Inverse Heat Conduction Technique

    Directory of Open Access Journals (Sweden)

    Marcelo Ribeiro dos Santos

    2014-01-01

    Full Text Available During machining energy is transformed into heat due to plastic deformation of the workpiece surface and friction between tool and workpiece. High temperatures are generated in the region of the cutting edge, which have a very important influence on wear rate of the cutting tool and on tool life. This work proposes the estimation of heat flux at the chip-tool interface using inverse techniques. Factors which influence the temperature distribution at the AISI M32C high speed steel tool rake face during machining of a ABNT 12L14 steel workpiece were also investigated. The temperature distribution was predicted using finite volume elements. A transient 3D numerical code using irregular and nonstaggered mesh was developed to solve the nonlinear heat diffusion equation. To validate the software, experimental tests were made. The inverse problem was solved using the function specification method. Heat fluxes at the tool-workpiece interface were estimated using inverse problems techniques and experimental temperatures. Tests were performed to study the effect of cutting parameters on cutting edge temperature. The results were compared with those of the tool-work thermocouple technique and a fair agreement was obtained.

  3. 2016 Research Final Presentation

    Energy Technology Data Exchange (ETDEWEB)

    Koskelo, EliseAnne Corinne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-16

    These are slides which show an example of research at Los Alamos National Laboratory done by E.C. Koskelo to show college professors in the hopes of earning a research position or fellowship position. In summary, this researcher developed a new in-situ technique for the inspection of additively manufactured parts, created an algorithm which can correct "skewed" scans of angular parts/taken at oblique angles, and used AWS to detect hidden defects and thickness changes in aerospace composites.

  4. Colliding worlds how cutting-edge science is redefining contemporary art

    CERN Document Server

    Miller, Arthur I

    2014-01-01

    In recent decades, an exciting new art movement has emerged in which artists illuminate the latest advances in science. Some of their provocative creations - a live rabbit implanted with the fluorescent gene of a jellyfish, a gigantic glass-and-chrome sculpture of the Big Bang itself - can be seen in traditional art museums and magazines, while others are being made by leading designers at Pixar, Google's Creative Lab and the MIT Media Lab. Arthur I. Miller takes readers on a wild journey to explore this new frontier. From the movement's origins a century ago - when Einstein shaped Cubism and X-rays affected fine photography - to the latest discoveries of biotechnology, cosmology and quantum physics, Miller shows how today's artists and designers are producing work at the cutting edge of science.

  5. Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modelling

    Directory of Open Access Journals (Sweden)

    Mustafa Ucgul

    2015-09-01

    Full Text Available The energy required for tillage processes accounts for a significant proportion of total energy used in crop production. In many tillage processes decreasing the draft and upward vertical forces is often desired for reduced fuel use and improved penetration, respectively. Recent studies have proved that the discrete element modelling (DEM can effectively be used to model the soil–tool interaction. In his study, Fielke (1994 [1] examined the effect of the various tool cutting edge geometries, namely; cutting edge height, length of underside rub, angle of underside clearance, on draft and vertical forces. In this paper the experimental parameters of Fielke (1994 [1] were simulated using 3D discrete element modelling techniques. In the simulations a hysteretic spring contact model integrated with a linear cohesion model that considers the plastic deformation behaviour of the soil hence provides better vertical force prediction was employed. DEM parameters were determined by comparing the experimental and simulation results of angle of repose and penetration tests. The results of the study showed that the simulation results of the soil-various tool cutting edge geometries agreed well with the experimental results of Fielke (1994 [1]. The modelling was then used to simulate a further range of cutting edge geometries to better define the effect of sweep tool cutting edge geometry parameters on tillage forces. The extra simulations were able to show that by using a sharper cutting edge with zero vertical cutting edge height the draft and upward vertical force were further reduced indicating there is benefit from having a really sharp cutting edge. The extra simulations also confirmed that the interpolated trends for angle of underside clearance as suggested by Fielke (1994 [1] where correct with a linear reduction in draft and upward vertical force for angle of underside clearance between the ranges of −25 and −5°, and between −5 and 0°. The

  6. "Crystals within Crystals: The Story of Sea Ice". A Classroom-Based Outreach Project Communicating Cutting-Edge Ocean Science to School Pupils

    Science.gov (United States)

    Butler, B.

    2016-02-01

    'Crystals within Crystals: The story of sea ice' is a UK based outreach project based that uses a range practical tools to engage school students with cutting edge scientific research that relates to the use of some of the world's most powerful X-rays in sea ice research. The project is delivered in the form of a classroom workshop that first introduces school pupils (aged 11-14) to seawater and the salts that give it a salinity. The pupils are then shown how the presence of salts within seawater results in very important physical changes when the liquid freezes, which includes different structural and optical properties of the ice. The properties of the ice are then linked to the presence of countless microscopic salt crystals that are trapped within the microstructure of the frozen seawater, which is explained with use of a novel crystal growth demonstration. Given that there is currently no way of successfully removing these salt crystals from the ice, the workshop culminates in explaining how some of the worlds most powerful X-rays can be used to investigate processes that otherwise remain elusive. The workshop introduces students to the fundamental principles of scientific enquiry, the sea ice environment, and the power of X-rays in investigating the properties of crystals. Here we present information that outlines a host of practical and project management tools that are applicacble to outreach projects in the the field of ocean sciences, with the aim of seeding ideas and interest for other graduate student to enage with the public during their studies.

  7. Improvement of Roller Bearing Diagnosis with Unlabeled Data Using Cut Edge Weight Confidence Based Tritraining

    Directory of Open Access Journals (Sweden)

    Wei-Li Qin

    2016-01-01

    Full Text Available Roller bearings are one of the most commonly used components in rotational machines. The fault diagnosis of roller bearings thus plays an important role in ensuring the safe functioning of the mechanical systems. However, in most cases of bearing fault diagnosis, there are limited number of labeled data to achieve a proper fault diagnosis. Therefore, exploiting unlabeled data plus few labeled data, this paper proposed a roller bearing fault diagnosis method based on tritraining to improve roller bearing diagnosis performance. To overcome the noise brought by wrong labeling into the classifiers training process, the cut edge weight confidence is introduced into the diagnosis framework. Besides a small trick called suspect principle is adopted to avoid overfitting problem. The proposed method is validated in two independent roller bearing fault experiment vibrational signals that both include three types of faults: inner-ring fault, outer-ring fault, and rolling element fault. The results demonstrate the desirable diagnostic performance improvement by the proposed method in the extreme situation where there is only limited number of labeled data.

  8. The state-of-the-art of emergency contraception with the cutting edge drug

    Directory of Open Access Journals (Sweden)

    Sarkar, Narendra Nath

    2011-01-01

    Full Text Available The objective of this study is to evaluate and elucidated the potential of selective progesterone receptor modulators (SPRMs to be an effective emergency contraception (EC. The data are extracted from the literature through the MEDLINE database service from 2000–2010. The SPRMs are in fact progesterone receptor ligands that could bind to progesterone receptor (PR and exert antagonistic, agonistic or mixed agonist-antagonistic effects. These SPRMs are mifepristone, onapristone, asoprisnil, ulipristal, proellex among other compounds. Currently developed SPRMs may exert contraceptive effects by inhibiting ovulation and retarding endometrial synchronization. Low-doses of progesterone antagonists retard endometrial maturation without affecting ovulation. Mifepristone being a SPRM is effective for prevention of pregnancy but with prostaglandin acts as an excellent abortifacient; yet could not compete with levonorgestrel as EC. However, a single dose of 30 mg ulipristal acetate, another SPRM with similar effectiveness and side effect profiles as 1.5 mg levonorgestrel EC, has shown wider ‘window of effect’ by inhibition of the LH peak even if administered at the advanced pre-ovulatory phase, a time when use of levonorgestrel EC is no longer effective. Thus, ulipristal acetate goes one-step ahead of levonorgestrel in the field of emergency contraception treatment. Further studies are needed to explore the potential of other SPRMs to be cutting edge emergency contraceptive drugs.

  9. On the Cutting Edge Professional Development Program - An effective model built from years of experience

    Science.gov (United States)

    Bruckner, M. Z.; Macdonald, H.; Beane, R. J.; Manduca, C. A.; Mcconnell, D. A.; Mogk, D. W.; Tewksbury, B. J.; Wiese, K.; Wysession, M. E.; Iverson, E. A. R.; Fox, S.

    2015-12-01

    The On the Cutting Edge (CE) program offers a successful model for designing and convening professional development events. Information about the model is now available on the CE website. The program model has evolved from more than 12 years of experience, building with input from strong leaders and participants. CE offers face-to-face, virtual, and hybrid events, and features a rich website that supports these professional development events as well as a growing community with a shared interest in effective geoscience teaching. Data from national surveys, participant feedback, and self-report data indicate the program's success in improving undergraduate geoscience education. Successes are also demonstrated in classroom observations using RTOP, indicating a significant difference in teaching style among participants and non-participants. A suite of web pages, with a planning timeline, provides guidance to those interested in designing and convening face-to-face or virtual events based on the CE model. The pages suggest ways to develop robust event goals and evaluation tools, how to choose strong leaders and recruit diverse participants, advice for designing effective event programs that utilize participant expertise, websites, and web tools, and suggestions for effectively disseminating event results and producing useful products. The CE model has been successfully transferred to projects that vary in scale and discipline. Best practices from the CE model include (1) thinking of the workshop as shared enterprise among conveners and participants; (2) incorporating conveners and participants who bring diverse viewpoints and approaches; (3) promoting structured discussions that utilize participants' expertise; (4) emphasizing practical strategies to effect change; and (5) using the website as a platform to prepare for the workshop, share ideas, and problem-solve challenges. Learn more about how to utilize this model for your project at:serc.carleton.edu/NAGTWorkshops/workshops/convene

  10. Investigation of the cut-edge corrosion of organically-coated galvanized steel after accelerated atmospheric corrosion test

    Directory of Open Access Journals (Sweden)

    Reşit Yıldız

    2015-11-01

    Full Text Available The cut edge corrosion of organically coated (epoxy, polyurethane and polyester galvanized steel was investigated using electrochemical impedance spectroscopy (EIS. Measurements were performed on specimens that had been tested in an accelerated atmospheric corrosion test. The samples were subjected to 10 s fogging and 1 h awaiting cycles in an exposure cabinet (120 and 180 days with artificial acid rain solution. According to the investigation, the coatings were damaged from the cut edge into the sheet, this distance was about 0.8 cm. These defects were more pronounced at after 180 days in proportion to after 120 days.

  11. How cutting-edge technologies impact the design of electrochemical (bio)sensors for environmental analysis. A review.

    Science.gov (United States)

    Arduini, Fabiana; Cinti, Stefano; Scognamiglio, Viviana; Moscone, Danila; Palleschi, Giuseppe

    2017-03-22

    Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Book review: Twenty-Five Years on the Cutting Edge of Obsidian Studies: Selected Readings from the IAOS Bulletin

    Directory of Open Access Journals (Sweden)

    Sean Dolan

    2017-03-01

    Full Text Available Edited by Carolyn D. Dillian (Coastal Carolina University, Twenty-Five Years on the Cutting Edge of Obsidian Studies: Selected Readings from the IAOS Bulletin consists of 19 previously published articles from the International Association for Obsidian Studies (IAOS Bulletin. Dillian selected these articles because they provide a range of methodological and theoretical approaches concerning archaeological obsidian studies from around the world like Eretria, California, and the Near East, for example.

  13. Supporting Faculty Learning About Teaching: The On the Cutting Edge Website

    Science.gov (United States)

    Fox, S.; Iverson, E. A.; Manduca, C. A.; Kirk, K. B.; McDaris, J. R.; Ormand, C. J.; Bruckner, M. Z.

    2011-12-01

    The On the Cutting Edge website captures information about teaching geoscience from workshop participants and leaders. Designed to both support workshop participants in making use of ideas developed at the workshop and to allow a broader audience to access these ideas, the site includes more than 4900 pages of content in 39 topical collections with more than 1400 community-contributed teaching activities. The site is well used: in 2010, 850,000 visitors made more than one million visits to the site viewing more than 2.1 million pages. To obtain a more detailed understanding of site use within our target population, we interviewed a sample of 30 geoscience faculty. Five primary uses were described repeatedly and in depth: finding ideas for teaching, understanding what colleagues are doing in specific teaching situations, learning about methods, tools, or topic in education or geoscience, finding visualizations, and networking or career planning. Interviewees could describe particular instances where they made use of teaching materials and could cite reasons why they believed this improved student learning. To understand how these uses are manifest in the weblogs, a sample of 73 sessions that lasted at least 10 minutes, and viewed 10 or more pages were selected from March 2009 logs. Sessions were selected to sample heavy use of one or more topical collections, and to sample the diversity of log characteristics. The sessions were described qualitatively and the resulting descriptions categorized. Four recognizable use patterns emerged: activity browsing in some cases combined with study of a pedagogic method, browsing visualizations and associated topical content, digging deep within a particular topical collection, and cross-site browsing. These patterns seem consistent with the uses reported in the interviews. An analysis of characteristics of all sessions in 2008 viewing 10 or more pages indicate that the major uses described in the interview study by 30 faculty

  14. On the Cutting Edge Professional Development Program: Workshop and Web Resources for Current and Future Geoscience Faculty

    Science.gov (United States)

    MacDonald, R.; Manduca, C. A.; Mogk, D. W.; Tewksbury, B. J.

    2004-12-01

    Recognizing that many college and university faculty receive little formal training in teaching, are largely unaware of advances in research on teaching and learning, and face a variety of challenges in advancing in academic careers, the National Science Foundation-funded program On the Cutting Edge provides professional development for current and future faculty in the geosciences at various stages in their careers. The program includes a series of six multi-day workshops, sessions and one-day workshops at professional meetings, and a website with information about workshop opportunities and a variety of resources that bring workshop content to faculty (http://serc.carleton.edu/NAGTWorkshops). The program helps faculty improve their teaching and their job satisfaction by providing resources on instructional methods, geoscience content, and strategies for career planning. Workshop and website resources address innovative and effective practices in teaching, course design, delivery of instructional materials, and career planning, as well as approaches for teaching particular topics and strategies for starting and maintaining a research program in various institutional settings. Each year, special workshops for graduate students and post-doctoral fellows interested in academic careers and for early career faculty complement offerings on course design and emerging topics that are open to the full geoscience community. These special workshops include sessions on topics such as dual careers, gender issues, family-work balance, interviewing and negotiating strategies. The workshops serve as opportunities for networking and community building, with participants building connections with other participants as well as workshop leaders. Workshop participants reflect the full range of institutional diversity as well as ethnic and racial diversity beyond that of the geoscience faculty workforce. More than 40 percent of the faculty participants are female. Of the faculty

  15. On the Cutting Edge: Face-to-Face and Virtual Professional Development for Current and Future Geoscience Faculty

    Science.gov (United States)

    Macdonald, H.; Manduca, C. A.; Mogk, D. W.; Tewksbury, B. J.; Iverson, E. A.; Kirk, K. B.; Beane, R. J.; McConnell, D.; Wiese, K.; Wysession, M. E.

    2011-12-01

    On the Cutting Edge, a comprehensive, discipline-wide professional development program for current and future geoscience faculty, aims to develop a geoscience professoriate committed to high-quality instruction based on currency in scientific knowledge, good pedagogic practice, and research on learning. Our program provides an integrated workshop series and online teaching resources. Since 2002, we have offered more than 80 face-to-face workshops, virtual workshops and webinars, and hybrid events. Participants come from two-year colleges and four-year colleges and universities. The workshop series is designed to address the needs of faculty in all career stages at the full spectrum of institutions and covering the breadth of the geoscience curriculum. We select timely and compelling topics and create opportunities of interest to faculty. We offer workshops on course design, new geoscience research and pedagogical topics, core geoscience curriculum topics, and introductory courses as well as workshops for early career faculty and for future faculty. Our workshops are designed to model good teaching practice. We set workshop goals that guide workshop planning and evaluation. Workshops are interactive, emphasize participant learning, provide opportunities for participants to interact and share experience/knowledge, provide good resources, give participants time to reflect and to develop action plans, and help transform their ideas about teaching. We emphasize the importance of adaptation in the context of their specific situations. For virtual workshops and webinars we use icebreakers and other structured interactions to build a comfortable workshop community; promote interaction through features on webinar software, chat-aided question and answer, small-group synchronous interactions, and/or discussion boards; plan detailed schedules for workshop events; use asynchronous discussions and recordings of synchronous events given that participants are busy with their

  16. Understanding the Deep Earth: Slabs, Drips, Plumes and More - An On the Cutting Edge Workshop

    Science.gov (United States)

    Williams, M. L.; Mogk, D. W.; McDaris, J. R.

    2010-12-01

    Exciting new science is emerging from the study of the deep Earth using a variety of approaches: observational instrumentation (e.g. EarthScope’s USArray; IRIS), analysis of rocks (xenoliths, isotopic tracers), experimental methods (COMPRES facilities), and modeling (physical and computational, e.g. CIG program). New images and models of active faults, subducting plates, mantle drips, and rising plumes are spurring a new excitement about deep Earth processes and connections between Earth’s internal systems, the plate tectonic system, and the physiography of Earth’s surface. The integration of these lines of research presents unique opportunities and also challenges in geoscience education. How can we best teach about the architecture, composition, and processes of Earth where it is hidden from direct observation. How can we make deep Earth science relevant and meaningful to students across the geoscience curriculum? And how can we use the exciting new discoveries about Earth processes to attract new students into science? To explore the intersection of research and teaching about the deep Earth, a virtual workshop was convened in February 2010 for experts in deep Earth research and undergraduate geoscience education. The six-day workshop consisted of online plenary talks, large and small group discussions, asynchronous contributions using threaded listservs and web-based work spaces, as well as development and review of new classroom and laboratory activities. The workshop goals were to: 1) help participants stay current about data, tools, services, and research related to the deep earth, 2) address the "big science questions" related to deep earth (e.g. plumes, slabs, drips, post-perovskite, etc.) and explore exciting new scientific approaches, 3) to consider ways to effectively teach about "what can't be seen", at least not directly, and 4) develop and review classroom teaching activities for undergraduate education using these data, tools, services, and

  17. Present status of Tokamak research

    International Nuclear Information System (INIS)

    Basu, Jayanta

    1991-01-01

    The scenario of thermonuclear fusion research is presented, and the tokamak which is the most promising candidate as a fusion reactor is introduced. A brief survey is given of the most noteworthy tokamaks in the global context, and fusion programmes relating to Next Step devices are outlined. Supplementary heating of tokamak plasma by different methods is briefly reviewed; the latest achievements in heating to fusion temperatures are also reported. The progress towards the high value of the fusion product necessary for ignition is described. The improvement in plasma confinement brought about especially by the H-mode, is discussed. The latest situation in pushing up Β for increasing the efficiency of a tokamak is elucidated. Mention is made of the different types of wall treatment of the tokamak vessel for impurity control, which has led to a significant improvement in tokamak performance. Different methods of current drive for steady state tokamak operation are reviewed, and the issue of current drive efficiency is addressed. A short resume is given of the various diagnostic methods which are employed on a routine basis in the major tokamak centres. A few diagnostics recently developed or proposed in the context of the advanced tokamaks as well as the Next Step devices are indicated. The important role of the interplay between theory, experiment and simulation is noted, and the areas of investigation requiring concerted effort for further progress in tokamak research are identified. (author). 17 refs

  18. Exploitation of the Ultraviolet Properties and Machine Cut Edges of Paper to Associate and Sequence Sheets in a Ream.

    Science.gov (United States)

    Musgrave, Nicola R; Thorne, Oliver T S

    2018-01-16

    Previously unreported line patterns visible under ultraviolet light were observed on a proportion of plain white A4 printer/copier paper from different manufacturers. These Ultraviolet Line Patterns (UVLPs) usually appear as stripes down the vertical length of the paper. Typically, the UVLPs were found to "repeat" through the ream in a predictable way, while also changing. It is postulated that the repeating nature of the UVLPs is a result of the way that paper is manufactured. This leads to the ability to sequence the sheets compared to their original source paper. Even in the absence of UVLPs, it is possible to use our observation of the manufacturing process to anticipate the order of several sheets of paper and conclusively associate them, in some cases, by physically fitting their machine cut edges and crossing paper fibers. Such a novel approach to examining questioned documents would be highly useful in forensic casework. © 2018 American Academy of Forensic Sciences.

  19. Remote Sensing Forage Quality for Browsing Herbivores: A Case Study of Cutting Edge Koala Conservation

    Science.gov (United States)

    Youngentob, K. N.; Au, J.; Held, A. A.; Foley, W. J.; Possingham, H. P.

    2014-12-01

    Managing landscapes for conservation requires a capacity to measure habitat quality. Although multiple factors are often responsible for the distribution and abundance of herbivores, spatial variations in the quality and quantity of plant forage are known to be important for many species. While we cannot see the chemical complexity of landscapes with our naked-eye, advances in imaging spectroscopy are making it possible to assess the quality of forage on a landscape-scale. Much research in this area has focused on the ability to estimate foliar nitrogen (N), because N is believed to be a limiting nutrient for many leaf eating animals. However, the total quantity of foliar N does not necessarily reflect the amount of N that can be utilized by herbivores. Available nitrogen (AvailN) is an invitro measure of forage quality that integrates the influence of tannins and fibre on the amount of foliar N that is available for digestion by herbivores. This may be a more meaningful measure of forage quality than total N for the many herbivorous species that are sensitive to the effects of tannins. Our previous research has demonstrated that it is possible to estimate this integrated measure of foliar nutritional quality at an individual tree crown level across multiple tree species using imaging spectroscopy (HyMap). Here we present a case study of how this remote sensing data is being used to help inform landscape management and conservation decisions for an iconic Australian species, the koala (Phascolarctos cinereus). We review the methods involved in developing maps of integrated measures of foliar nutritional quality for browsing herbivores with airborne imaging spectroscopy data and discuss their applications for wildlife management.

  20. Cutting-edge analysis of extracellular microparticles using ImageStream(X) imaging flow cytometry.

    Science.gov (United States)

    Headland, Sarah E; Jones, Hefin R; D'Sa, Adelina S V; Perretti, Mauro; Norling, Lucy V

    2014-06-10

    Interest in extracellular vesicle biology has exploded in the past decade, since these microstructures seem endowed with multiple roles, from blood coagulation to inter-cellular communication in pathophysiology. In order for microparticle research to evolve as a preclinical and clinical tool, accurate quantification of microparticle levels is a fundamental requirement, but their size and the complexity of sample fluids present major technical challenges. Flow cytometry is commonly used, but suffers from low sensitivity and accuracy. Use of Amnis ImageStream(X) Mk II imaging flow cytometer afforded accurate analysis of calibration beads ranging from 1 μm to 20 nm; and microparticles, which could be observed and quantified in whole blood, platelet-rich and platelet-free plasma and in leukocyte supernatants. Another advantage was the minimal sample preparation and volume required. Use of this high throughput analyzer allowed simultaneous phenotypic definition of the parent cells and offspring microparticles along with real time microparticle generation kinetics. With the current paucity of reliable techniques for the analysis of microparticles, we propose that the ImageStream(X) could be used effectively to advance this scientific field.

  1. On the cutting edge technology enabling the challenging missions to asteroids and comets, our primitive neighbors

    Science.gov (United States)

    Kawaguchi, J.

    2014-07-01

    The world's first sample-and-return mission from an object orbiting outside the sphere of influence of the Earth was successfully performed through Hayabusa in 2010, an engineering demonstration mission of JAXA. And it was followed by another technology demonstrator, Ikaros, the world's first solar-sail mission launched in 2010, the same year of the Hayabusa return. These two demonstrations represent the significance of the technology development that shall precede the real science missions that will follow. The space-exploration community focuses its attention on the use of asteroids and comets as one of the most immediate destinations. Humans will perform voyages to those objects sooner or later. And we will initiate a kind of research as scientific activity for those objects. The missions may include even sample-and-return missions to those bodies for assessing the chance of possible resource utilization in future. The first step for it is, needless to say, science. Combining the sample-and-return technology using the ultra-high-speed reentry for sample recovery with the new propulsion system using both electric and photon force will be the direct conclusion from Hayabusa and Ikaros. And key elements such as autonomy are also among the essential factors in making the sophisticated operation possible around asteroids and comets avoiding the communication difficulty. This presentation will comprehensively touch on what those technology skills are, and how they are applicable to the subsequent new missions, from the mission leader's point of view. They are probably real requisites for planning brand-new innovative challenges in the ACM community.

  2. Lasers: present and future research

    International Nuclear Information System (INIS)

    Philippe, P.

    1981-01-01

    Recent advances in the field of lasers are reviewed in particular in the French laboratories. Different lasers are briefly described related to their applications: rare gas halide, iodine, metal vapor, color center, transition-metal solid state, CO 2 , chemical, blue-green and free electron lasers. Among applications researches on thermonuclear fusion are given p. 125 and researches concerning isotope separation are given p. 126 and 127 [fr

  3. MGDS: Free, on-line, cutting-edge tools to enable the democratisation of geoscience data

    Science.gov (United States)

    Goodwillie, A. M.; Ryan, W. B.; O'Hara, S.; Ferrini, V.; Arko, R. A.; Coplan, J.; Chan, S.; Carbotte, S. M.; Nitsche, F. O.; Bonczkowski, J.; Morton, J. J.; Weissel, R.; Leung, A.

    2010-12-01

    The availability of user-friendly, effective cyber-information resources for accessing and manipulating geoscience data has grown rapidly in recent years. Based at Lamont-Doherty Earth Observatory the MGDS group has developed a number of free tools that have wide application across the geosciences for both educators and researchers. A simple web page (http://www.marine-geo.org/) allows users to search for and download many types of data by key word, geographical region, or published citation. The popular Create Maps and Grids function and the downloadable Google Earth-compatible KML files appeal to a wide user base. MGDS MediaBank galleries (http://media.marine-geo.org/) enable users to view and download compelling images that are purposefully selected for their educational value from NSF-funded field programs. GeoMapApp (http://www.geomapapp.org), a free map-based interactive tool that works on any machine, is increasingly being adopted across a broad suite of users from middle school students to university researchers. GeoMapApp allows users to plot, manipulate and present data in an intuitive geographical reference frame. GeoMapApp offers a convenient way to explore the wide range of built-in data sets, to quickly generate maps and images that aid visualisation and, when importing their own gridded and tabular data sets, to access the same rich built-in functionality. A user guide, short multi-media tutorials, and webinar are available on-line. The regularly-updated Global Multi-Resolution Topography (GMRT) Synthesis is used as the default GeoMapApp base map and is an increasingly popular means to rapidly create location maps. Additionally, the layer manager offers a fast way to overlay and compare multiple data sets and is augmented by the ability to alter layer transparency so that underlying layers become visible. Examples of GeoMapApp built-in data sets include high-resolution land topography and ocean floor bathymetry derived from satellite and multi

  4. The cutting edge - Micro-CT for quantitative toolmark analysis of sharp force trauma to bone.

    Science.gov (United States)

    Norman, D G; Watson, D G; Burnett, B; Fenne, P M; Williams, M A

    2018-02-01

    real-world knife marks imaged by micro-CT to demonstrate the potential of quantitative approaches in knife mark analysis. Findings and methods presented in this study are relevant to both forensic toolmark researchers as well as practitioners. Limitations of the experimental methodologies and imaging techniques are discussed, and further work is recommended. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. From cutting-edge pointwise cross-section to groupwise reaction rate: A primer

    OpenAIRE

    Sublet Jean-Christophe; Fleming Michael; Gilbert Mark R.

    2017-01-01

    The nuclear research and development community has a history of using both integral and differential experiments to support accurate lattice-reactor, nuclear reactor criticality and shielding simulations, as well as verification and validation efforts of cross sections and emitted particle spectra. An important aspect to this type of analysis is the proper consideration of the contribution of the neutron spectrum in its entirety, with correct propagation of uncertainties and standard deviatio...

  6. The Aesthetic Surgery Literature: Do Plastic Surgeons Remain at the Cutting Edge?

    Science.gov (United States)

    Dolan, Roisin T; Zins, James E; Morrison, Colin M

    2016-07-01

    The aesthetic surgery arena has become a competitive marketplace. Recognition as an authority in aesthetic surgery remains a powerful marketing tool for plastic surgeons, but have significant inroads been made by other specialties? The aims of this study were to analyze publication trends relating to the top five most commonly performed aesthetic surgical procedures, and to assess the origins (i.e., source specialty, authorship, institutions, and countries) of published aesthetic surgical research. Based on the seventeenth annual multispecialty data set provided by the American Society for Aesthetic Plastic Surgery, the top five most commonly performed aesthetic surgical procedures were selected. A temporal analysis of publication and citation rates, source institution and country, publishing journal, funding agency trends, and level of evidence was undertaken from 1970 to 2013. Using the search criteria, 7762 articles were identified. There was an 8.8-fold increase in publication volume when the first decade (n = 375) was compared with the last decade (n = 3326). Over the past four decades, 52.2 percent of publications (n = 4053 of 7762) originated from plastic surgery research institutions, with varying contributions from other specialties. Competition was greatest in relation to authorship of blepharoplasty- and rhinoplasty-related publications. Although plastic surgeons continue to maintain a center-stage presence in terms of authorship of aesthetic surgical literature, significant contributions are now made by other specialties. Plastic surgeons must continue to foster high-quality, peer-reviewed research and innovations to maintain their visibility as leaders in the aesthetic surgery literature and sustain a competitive advantage in aesthetic surgery practice.

  7. Fresno State joins CERN-related program to explore cutting edge physics

    CERN Multimedia

    2008-01-01

    California State University, Fresno has joined a collaboration of top physicists to work with what scientists believe will be the driving force behind high-energy physics for the foreseeable future. The program is the ATLAS (an acronym for A Toroidal LHC ApparatuS) experiment, which makes use of the Large Hadron Collider under construction at the European Organization for Nuclear Research (CERN) near Geneva, Switzerland. Fresno State says it is the only one of the 23 California State University system schools participating in the LHC program and CERN.

  8. ATLAS and CMS Virtual Visits: Bringing Cutting Edge Science into the Classroom and Beyond

    CERN Document Server

    Lapka, Marzena; Aguirre, Lucie; Hill, Ewan; Bourdarios, Claire; Beni, Noemi; Hochkeppel, Stephan Michael; Petrilli, Achille; Szillasi, Zoltan; Alexopoulos, Angelos

    2015-01-01

    Advances in information and communications technologies (ICTs) have given rise to innovative uses of web-based video tools for global communication, enhancing the impact of large research facilities, including their outreach and education programmes. As an example, the Virtual Visits programmes developed by the ATLAS and CMS collaborations at CERN, use videoconferencing to communicate with schools and remote events around the globe. The goal of these programmes is to enable the public, especially young people, to become engaged in and understand the field of particle physics through direct dialogue between ATLAS/CMS scientists and remote audiences. ATLAS and CMS collaborations enhanced the Virtual Visits concept in different ways, but still with the same objective, which is to break down geographical barriers and allow more people to enter the world of science, physics and particle physics. This supports local education and outreach activities. Both collaborations have hosted Virtual Visits for thousands of p...

  9. Forces, surface finish and friction characteristics in surface engineered single- and multiple-point cutting edges

    International Nuclear Information System (INIS)

    Sarwar, M.; Gillibrand, D.; Bradbury, S.R.

    1991-01-01

    Advanced surface engineering technologies (physical and chemical vapour deposition) have been successfully applied to high speed steel and carbide cutting tools, and the potential benefits in terms of both performance and longer tool life, are now well established. Although major achievements have been reported by many manufacturers and users, there are a number of applications where surface engineering has been unsuccessful. Considerable attention has been given to the film characteristics and the variables associated with its properties; however, very little attention has been directed towards the benefits to the tool user. In order to apply surface engineering technology effectively to cutting tools, the coater needs to have accurate information relating to cutting conditions, i.e. cutting forces, stress and temperature etc. The present paper describes results obtained with single- and multiple-point cutting tools with examples of failures, which should help the surface coater to appreciate the significance of the cutting conditions, and in particular the magnitude of the forces and stresses present during cutting processes. These results will assist the development of a systems approach to cutting tool technology and surface engineering with a view to developing an improved product. (orig.)

  10. Experiments and FE-simulations of stretch flanging of DP-steels with different shear cut edge quality

    Science.gov (United States)

    Sigvant, M.; Falk, J.; Pilthammar, J.

    2017-09-01

    Dual-Phase (DP) steels are today used in the automotive industry due to its large strength to weight ratio. However, the high strength of DP-steel does have a negative impact on the general formability in sheet metal forming. Unfavourable process conditions in the press shop will, on top of this, reduce the formability of DP-steels even more. This paper addresses the problem of edge fracture in stretch flanges in sheet metal parts made of DP-steel. The experimental part involves tests of ten different DP590 and DP780 steel grades with three different shear cut qualities. The influence on the fracture strain of the sample orientation of the shear cut are also studied by facing the burr away or towards the punch and testing samples with the cut edge parallel with the rolling direction and the transverse direction. The strains are measured with an ARAMIS system in each test, together with punch displacement and punch force. All tests are then simulated with AutoFormplus R7 and the results from these simulations are compared with the experimental results in order to find the appropriate failure strain for each combination of supplier, coating, thickness and shear cut quality.

  11. The Role Dafachronic Acid Signaling in Development and Longevity in Caenorhabditis elegans: Digging Deeper Using Cutting Edge Analytical Chemistry

    Directory of Open Access Journals (Sweden)

    Hugo eAguilaniu

    2016-02-01

    Full Text Available Steroid hormones regulate physiological processes in species ranging from plants to humans. A wide range of steroid hormones exist, and their contributions to processes such as growth, reproduction, development, and aging, is almost always complex. Understanding the biosynthetic pathways that generate steroid hormones and the signaling pathways that mediate their effects is thus of fundamental importance. In this work, we review recent advances in (i the biological role of steroid hormones in the roundworm Caenorhabditis elegans and (ii the development of novel methods to facilitate the detection and identification of these molecules. Our current understanding of steroid signaling in this simple organism serves to illustrate the challenges we face moving forward. First, it seems clear that we have not yet identified all of the enzymes responsible for steroid biosynthesis and/or degradation. Second, perturbation of steroid signaling affects a wide range of phenotypes, and subtly different steroid molecules can have distinct effects. Finally, steroid hormone levels are critically important, and minute variations in quantity can profoundly impact a phenotype. Thus, it is imperative that we develop innovative analytical tools and combine them with cutting-edge approaches such as comprehensive and highly selective liquid chromatography coupled to mass spectrometry (LC-MS based or new methods such as supercritical fluid chromatography coupled to mass spectrometry (SFC-MS if we are to obtain a better understanding of the biological functions of steroid signaling.

  12. Discover the Cosmos - Bringing Cutting Edge Science to Schools across Europe

    Science.gov (United States)

    Doran, Rosa

    2015-03-01

    The fast growing number of science data repositories is opening enormous possibilities to scientists all over the world. The emergence of citizen science projects is engaging in science discovery a large number of citizens globally. Astronomical research is now a possibility to anyone having a computer and some form of data access. This opens a very interesting and strategic possibility to engage large audiences in the making and understanding of science. On another perspective it would be only natural to imagine that soon enough data mining will be an active part of the academic path of university or even secondary schools students. The possibility is very exciting but the road not very promising. Even in the most developed nations, where all schools are equipped with modern ICT facilities the use of such possibilities is still a very rare episode. The Galileo Teacher Training Program GTTP, a legacy of IYA2009, is participating in some of the most emblematic projects funded by the European Commission and targeting modern tools, resources and methodologies for science teaching. One of this projects is Discover the Cosmos which is aiming to target this issue by empowering educators with the necessary skills to embark on this innovative path: teaching science while doing science.

  13. Stress, food, and inflammation: psychoneuroimmunology and nutrition at the cutting edge.

    Science.gov (United States)

    Kiecolt-Glaser, Janice K

    2010-05-01

    Inflammation is the common link among the leading causes of death. Mechanistic studies have shown how various dietary components can modulate key pathways to inflammation, including sympathetic activity, oxidative stress, transcription factor nuclear factor-kappaB activation, and proinflammatory cytokine production. Behavioral studies have demonstrated that stressful events and depression can also influence inflammation through these same processes. If the joint contributions of diet and behavior to inflammation were simply additive, they would be important. However, several far more intriguing interactive possibilities are discussed: stress influences food choices; stress can enhance maladaptive metabolic responses to unhealthy meals; and diet can affect mood as well as proinflammatory responses to stressors. Furthermore, because the vagus nerve innervates tissues involved in the digestion, absorption, and metabolism of nutrients, vagal activation can directly and profoundly influence metabolic responses to food, as well as inflammation; in turn, both depression and stress have well-documented negative effects on vagal activation, contributing to the lively interplay between the brain and the gut. As one example, omega-3 fatty acid intake can boost mood and vagal tone, dampen nuclear factor-kappaB activation and responses to endotoxin, and modulate the magnitude of inflammatory responses to stressors. A better understanding of how stressors, negative emotions, and unhealthy meals work together to enhance inflammation will benefit behavioral and nutritional research, as well as the broader biomedical community.

  14. Energy technologies at the cutting edge: international energy technology collaboration IEA Implementing Agreements

    Energy Technology Data Exchange (ETDEWEB)

    Pottinger, C. (ed.)

    2007-05-15

    Ensuring energy security and addressing climate change issues in a cost-effective way are the main challenges of energy policies and in the longer term will be solved only through technology cooperation. To encourage collaborative efforts to meet these energy challenges, the IEA created a legal contract - Implementing Agreement - and a system of standard rules and regulations. This allows interested member and non-member governments or other organisations to pool resources and to foster the research, development and deployment of particular technologies. For more than 30 years, this international technology collaboration has been a fundamental building block in facilitating progress of new or improved energy technologies. There are now 41 Implementing Agreements. This is the third in the series of publications highlighting the recent results and achievements of the IEA Implementing Agreements. This document is arranged in the following sections: Cross-cutting activities (sub-sectioned: Climate technology initiative; Energy Technology Data Eexchange; and Energy technology systems analysis programme); End-use technologies (sub-sectioned: Buildings; Electricity; Industry; and Transport; Fossil fuels (sub-sectioned: Clean Coal Centre; Enhanced oil recovery Fluidized bed conversion; Greenhouse Gas R & D; Multiphase flow sciences); Fusion power; Renewable energies and hydrogen; and For more information (including detail on the IEA energy technology network; IEA Secretariat Implementing Agreement support; and IEA framework. Addresses are given for the Implementing Agreements. The publication is based on core input from the Implementing Agreement Executive Committee.

  15. HGSA DNA day essay contest winner 60 years on: still coding for cutting-edge science.

    Science.gov (United States)

    Yates, Patrick

    2013-08-01

    MESSAGE FROM THE EDUCATION COMMITTEE: In 2013, the Education Committee of the Human Genetics Society of Australasia (HGSA) established the DNA Day Essay Contest in Australia and New Zealand. The contest was first established by the American Society of Human Genetics in 2005 and the HGSA DNA Day Essay Contest is adapted from this contest via a collaborative partnership. The aim of the contest is to engage high school students with important concepts in genetics through literature research and reflection. As 2013 marks the 60th anniversary of the discovery of the double helix of DNA by James Watson and Francis Crick and the 10th anniversary of the first sequencing of the human genome, the essay topic was to choose either of these breakthroughs and explain its broader impact on biotechnology, human health and disease, or our understanding of basic genetics, such as genetic variation or gene expression. The contest attracted 87 entrants in 2013, with the winning essay authored by Patrick Yates, a Year 12 student from Melbourne High School. Further details about the contest including the names and schools of the other finalists can be found at http://www.hgsa-essay.net.au/. The Education Committee would like to thank all the 2013 applicants and encourage students to enter in 2014.

  16. At the cutting edge: applications and perspectives of laser nanosurgery in cell biology.

    Science.gov (United States)

    Ronchi, Paolo; Terjung, Stefan; Pepperkok, Rainer

    2012-04-01

    Laser-mediated nanosurgery has become popular in the last decade because of the previously unexplored possibility of ablating biological material inside living cells with sub-micrometer precision. A number of publications have shown the potential applications of this technique, ranging from the dissection of sub-cellular structures to surgical ablations of whole cells or tissues in model systems such as Drosophila melanogaster or Danio rerio . In parallel, the recent development of micropatterning techniques has given cell biologists the possibility to shape cells and reproducibly organize the intracellular space. The integration of these two techniques has only recently started yet their combination has proven to be very interesting. The aim of this review is to present recent applications of laser nanosurgery in cell biology and to discuss the possible developments of this approach, particularly in combination with micropattern-mediated endomembrane organization.

  17. Cutting edge SRU control : improved environmental compliance with Jacobs advanced burner control+ (ABC+)

    Energy Technology Data Exchange (ETDEWEB)

    Molenaar, G. [Jacobs Canada Inc., Calgary, AB (Canada); Henning, A.; Kobussen, S. [Jacobs Nederland BV, Hoogvliet (Netherlands)

    2009-07-01

    Oil sands bitumen contains approximately 4 to 5 per cent sulphur by weight and the bitumen is upgraded to produce lighter fractions. During coking the bitumen is heated and cracked into lighter molecules and a mixture of kerosene, naphtha and gas oil is recovered via fractionation. Then, the vapors leaving the fractionator are processed through hydrodesulphurization, followed by removal by amine based sweetening units. The acid gas from the ASUs is sent to the sulphur recovery units (SRUs) where most of the sulphur is recovered as elemental sulphur. The oil sands industry faces many challenges with respect to environmental impact, energy use and greenhouse gas emissions including the recovery of sulphur and minimizing hydrogen sulfide (H{sub 2}S) and sulphur dioxide (SO{sub 2}) emissions from the oil sands production facilities. In order to improve the SRU control response to acid gas feed variations, Jacobs Comprimo Sulphur Solutions implemented advanced burner control+ (ABC+) at Suncor's Simonette Gas Plant's SRU in northern Alberta. This control system used an acid gas feed analyzer and dynamic algorithms to control the combustion air to the reaction furnace. The analyzer measures H{sub 2}S, total hydrocarbons, carbon dioxide (CO{sub 2}) and water (H{sub 2}O) accurately and quickly, which is important for having effective and fast air-to-acid gas ratio control. The paper provided background information on the Suncor Simonette Gas Plant and discussed ABC+ versus conventional control. An overview of the simplified ABC and ABC+ systems was then illustrated and presented. The ABB multiwave process photometer was also explained. Last, a dynamic simulation of the potential benefits of ABC+ was discussed and the ABC+ benefits for oil sands were presented. It was concluded that ABC+ provides improved SRU performance, reduced SO{sub 2} emissions and violations, and reduced flaring. 1 tab., 3 figs.

  18. THE CUTTING EDGE OF RETINOPATHY OF PREMATURITY CARE: Expanding the Boundaries of Diagnosis and Treatment.

    Science.gov (United States)

    Yonekawa, Yoshihiro; Thomas, Benjamin J; Thanos, Aristomenis; Todorich, Bozho; Drenser, Kimberly A; Trese, Michael T; Capone, Antonio

    2017-12-01

    To discuss the latest advances and controversies in the diagnosis and care of infants with retinopathy of prematurity (ROP). Literature review. Retinopathy of prematurity remains a major global issue. Industrialized nations now treat profoundly premature infants with posterior and aggressive disease, and middle-income nations are experiencing ROP epidemics. Remote digital imaging may address the decreasing ratio of ROP providers to premature infants, in addition to improving patient care. Widefield angiography, optical coherence tomography, and the Wnt signaling pathway have provided new insights into ROP pathogenesis. Anti-vascular endothelial growth factor treatment is increasing in popularity, but the dearth of information to guide dosing, unpredictable reactivation, persistent vascular abnormalities, the "crunch" phenomenon, and the presently unknown effects of systemic vascular endothelial growth factor suppression remain issues to continue investigating. Neurodevelopmental delay has been raised as a potential consequence, but the evidence currently is weak. Vitrectomy is the treatment of choice for Stages 4 and 5. Illumination techniques, ab interno incisions, plasmin-assisted vitrectomy, staged surgery in the interest of corneal clearing for advanced Stage 5, and immediate sequential bilateral vitreoretinal surgery, are useful techniques. We are making progress in ROP management. Our goal as clinicians is to continue expanding the boundaries of our abilities to keep this blinding disease in check globally.

  19. Ultrasonic osteotome: A cutting edge technology, our experience in 96 patients

    Directory of Open Access Journals (Sweden)

    V Velho

    2014-01-01

    Full Text Available Background: The ultrasonic osteotome is a tissue-specific device that allows the surgeon to make precise osteotomies while protecting collateral or adjacent soft tissue structures. The recurring impacts pulverize the noncompliant crystalline structure resulting in a precise cut. The more compliant adjacent soft tissue is not affected by the ultrasonic oscillation. Objective: The purpose of this study is to present our experience of using this technology in osteotomies. Materials and Methods: We reviewed 96 patients, both male and female; of different ages in which ultrasonic osteotome was used to perform an osteotomy of different manners (Craniotomy, laminotomy, facetectomy, etc.. Patients with head injury, spine injury, degenerative spine diseases, and brain tumors were included in this study. Results: In all these patients, the bone cut was even with minimal surrounding bone loss. The time required for the osteotomy was reduced to half. There was no damage to underlying dura, cord or nerve structures. Conclusions: Ultrasonic osteotome is a safe and effective ultrasonic bone cutting device that can be used to facilitate osteotomies in various types of cranial and spinal surgeries. This device allows precision bone cutting with minimal surrounding bone loss and obviates the risk associated with the use of high-speed burrs and oscillating saws.

  20. Eumetcal blended courses: European cutting edge know-how and collaboration will into meteorological training

    Science.gov (United States)

    Chiariello, A.; Nietosvaara, V.

    2009-09-01

    Eumetcal is the European virtual meteorological training organization pooling knowledge in distance and e-learning throughout Europe. The Eumetcal programme is managed by the Finnish Meteorological Institute (FMI). Beyond the traditional activities, in the latest years Eumetcal has combined the experience and know-how gained so far to deliver several complete training courses in meteorology using a blended learning approach. The courses have been delivered through cooperation between European NMSs using both classroom sessions and distance learning material and lectures. This approach has significantly reduced the cost associated with travel and subsistence when compared to traditional courses. Moreover this approach has turned out successful: the relatively long distance phase creates an optimal background, both of specific know-how and reciprocal contacts, for the traditional classroom phase. Attendees and teachers from all over Europe meet together after a solid warm up and exploit the course like if they had known each other for a long time. On the other hand the distance phase allows teachers to assess the level and background of the participants and gives attendees the possibility to improve and reach the required skills and know-how to exploit with the best profit the classroom phase. This approach has revealed an optimal solution to carry out meteorological courses with participants coming from several different countries and therefore bearing with them not only different know-how but also different cultural approaches, needs and expectations. The presentation aims at illustrating to the audience the structure of the blended courses, the experience gathered in the last years of blended course activities (with some real life examples), challenges and future plans and developments.

  1. Research, Boundaries, and Policy in Networked Learning

    DEFF Research Database (Denmark)

    This book presents cutting-edge, peer reviewed research on networked learning organized by three themes: policy in networked learning, researching networked learning, and boundaries in networked learning. The "policy in networked learning" section explores networked learning in relation to policy...... networks, spaces of algorithmic governance and more. The "boundaries in networked learning" section investigates frameworks of students' digital literacy practices, among other important frameworks in digital learning. Lastly, the "research in networked learning" section delves into new research methods...

  2. Cutting edge proteomics

    DEFF Research Database (Denmark)

    Bunkenborg, Jakob; Espadas, Guadalupe; Molina, Henrik

    2013-01-01

    Tryptic digestion is an important component of most proteomics experiments, and trypsin is available from many sources with a cost that varies by more than 1000-fold. This high-mass-accuracy LC-MS study benchmarks six commercially available trypsins with respect to autolytic species and sequence ...

  3. Shaping the Future: Integrating Cutting Edge Equipment to Enhance Research, Education and Outreach at Nova Southeastern University

    Science.gov (United States)

    2015-04-30

    antibiotic resistance and preventing the spread of infectious disease . These projects include 1) uncovering how the inoculum effect can drive spontaneous...bacterial infections. Furthermore, our results may have implications in controlling the spread of infectious diseases and the spread of invasive...equipment. For instance, a new faculty member starting this fall will be bringing dental pulp stem cells, collaborations will continue with pharmacology

  4. Commentary--A United Front: Using the Range of Psychological Variance in Cutting-Edge Practice and Emerging Research

    Science.gov (United States)

    Jackson, Simon Anthony; Kleitman, Sabina

    2015-01-01

    Psychological and behavioral variance can be explained by differences in the environment, and between and within individuals. Almost 60 years ago, Cronbach (1957) called for converging investigations into all three sources as important for the development of accurate science and useful applications in the real world. Yet rifts among researchers…

  5. Using the Microcomputer for Advertising Research Presentations.

    Science.gov (United States)

    Larkin, Ernest F.

    A midwestern university is testing a program that uses the Apple II computer to help students in an advertising research course develop their skills in preparing and presenting research reports using computer generated graphics for both oral and written presentations. One of the course requirements is the preparation of a final project, including…

  6. Recommender systems for technology enhanced learning research trends and applications

    CERN Document Server

    Manouselis, Nikos; Verbert, Katrien

    2014-01-01

    Presents cutting edge research from leading experts in the growing field of Recommender Systems for Technology Enhanced Learning (RecSys TEL) International contributions are included to demonstrate the merging of various efforts and communities Topics include: Linked Data and the Social Web as Facilitators for TEL Recommender Systems in Research and Practice, Personalised Learning-Plan Recommendations in Game-Based Learning and Recommendations from Heterogeneous Sources in a Technology Enhanced Learning Ecosystem

  7. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  8. Past, Present and Future in Interdisciplinary Research

    Science.gov (United States)

    Gusdorf, Georges

    1977-01-01

    Presents examples of interdisciplinary research since the origin of western science and predicts that future interdisciplinary approaches to epistemological writing will take into account divergent thinking patterns and thereby end the domination by western intellectual imperialism. For journal availability, see SO 506 201. (Author/DB)

  9. [Scanning electron microscopic investigations of cutting edge quality in lamellar keratotomy using the Wavelight femtosecond laser (FS-200) : What influence do spot distance and an additional tunnel have?

    Science.gov (United States)

    Hammer, T; Höche, T; Heichel, J

    2018-01-01

    Femtosecond lasers (fs-lasers) are established cutting instruments for the creation of LASIK flaps. Previous studies often showed even rougher surfaces after application of fs-laser systems compared to lamellar keratotomy with mechanical microkeratomes. When cutting the cornea with fs-lasers, an intrastromal gas development occurs, which has a potentially negative influence on the cutting quality if the gas cannot be dissipated; therefore, manufacturers have chosen the way of gas assimilation in so-called pockets. The investigated system creates a tunnel which opens under the conjunctiva. The aim of this study was to investigate the effects of a tunnel as well as the influence of different spot distances on the quality of cut surfaces and edges. In this experimental study on freshly enucleated porcine eyes (n = 15), the following cuts were carried out with the FS-200 (Wavelight, Erlangen, Germany): 1. standard setting (spot and line separation 8 µm), 2. with tunnel for gas drainage, 3. without gas-conducting tunnel, 4. with increased spot spacing (spot and line separation 9 μm instead of 8 μm) and 5. with reduced spot spacing (spot and line separation 7 μm instead of 8 μm). Subsequently, scanning electron microscopy (FEI Quanta 650, Hillsboro, OR) of the cut edges and surfaces as well as the gas drain tunnel were performed. The evaluation was based on an established score. The current fs-laser system (200 Hz) is able to create smooth cutting surfaces and sharp edges. The changed density of laser pulses compared to the standard settings with a reduced or increased distance between the pulses, did not achieve any further improvement in the surface quality. The gas-conducting tunnel could be detected by scanning electron microscope. In the case of cutting without a tunnel, roughened surfaces and irregularities on the cutting edges were found. When the FS-200 fs-laser is used, LASIK cuts with very smooth cut surfaces and sharp cutting

  10. Pastoral research: past, present, and future.

    Science.gov (United States)

    Gleason, John J

    2004-01-01

    In healthcare environments of excellence, clinically trained chaplains are valued members of the medical treatment team. There are skills and values they hold in common with medicine and allied health disciplines: enhancing the health and well-being of the patient as a unity of body, mind, and spirit within a unique family and cultural system. This article examines the past, present, and future of pastoral research, including the chaplain's moral imperative to examine practice and to share what is found.

  11. Wageningen leads the way : Wageningen UR University in The Netherlands provides access to cutting edge greenhouse technology worldwide

    NARCIS (Netherlands)

    Brown-Paul, Chr.; Bakker, J.C.

    2014-01-01

    Wageningen UR Greenhouse Horticulture collaborate with research institutes in Australia on research in the field of greenhouse horticultural production. Interview with Dr. Sjaak Bakker of the Business Unit.

  12. 2012 Molecular Basis of Microbial One-Carbon Metabolism Gordon Research Conferences and Gordon Research Seminar, August 4-10,2012

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, Thomas

    2012-08-10

    The 2012 Gordon Conference will present and discuss cutting-edge research in the field of microbial metabolism of C1 compounds. The conference will feature the roles and application of C1 metabolism in natural and synthetic systems at scales from molecules to ecosystems. The conference will stress molecular aspects of the unique metabolism exhibited by autotrophic bacteria, methanogens, methylotrophs, aerobic and anaerobic methanotrophs, and acetogens.

  13. Bubbler condenser related research work. Present situation

    International Nuclear Information System (INIS)

    2001-02-01

    Intensive discussions within the OECD Support Group on 'VVER-440 Bubbler Condenser Containment Research Work' between 1991 and 1994 demonstrated the need for supplementary research work to achieve an adequate level of basic knowledge. In 1994, the European Commission (EC) asked for a specific 'VVER-440/213 Bubble Condenser Qualification Feasibility Study', which was finished early in 1996, confirming the need for additional research in this field. The Feasibility study formed the basis for the Bubble Condenser Experimental Qualification Project (BCEQ) with two separate experimental activities to be executed within the frame of the PHARE/TACIS 2.13/95 project of the European Commission. A first activity served to study the thermal-hydraulic phenomena and the associated structure dynamic interactions. This part of the project was performed at EREC, in Elektrogorsk, Russia. The design of the test facility was based on the prototypical bubbler condenser configuration for the Hungarian Paks nuclear power plant. A second activity addressed the structural integrity of certain components of the bubbler condenser steel structures under DBA-typical conditions. This part of the project was performed at VUEZ, in Levice, Slovak Republic. The design of the components of this facility was based on the structural properties of the Dukovany and/or Bohunice nuclear power plants. A third component of the BCEQ project was specified later asking for analytical studies, which should be supported by a number of small-scale separate effects tests to be performed at SVUSS, in Bechovice, Czech Republic. The main experimental and analytical results of the BCEQ test campaigns have been presented and discussed within the frame of the 4. meeting of the Technical Advisory Committee to the BCEQ (Bubble Condenser Experimental Qualification) Project in Brussels in December 1999 and on occasion of the 11. OECD Support Group Meeting in Berlin in April 2000. The discussions had evidenced several

  14. Workshop presentation: research guidelines for Construction Management

    OpenAIRE

    Marco Alvise Bragadin

    2013-01-01

    Nowadays the European economic system challenges the construction sector to take part to industrial recovery of western countries. In co-operation with the Construction Production research group of the Tampere University of of research about construction management tools and methods were detected. Research guidelines: 1) Construction management: tools and methods to manage construction projects 2) environmental impact of construction projects 3) construction management and safety 4) project p...

  15. Workshop presentation: research guidelines for Construction Management

    Directory of Open Access Journals (Sweden)

    Marco Alvise Bragadin

    2013-10-01

    Full Text Available Nowadays the European economic system challenges the construction sector to take part to industrial recovery of western countries. In co-operation with the Construction Production research group of the Tampere University of of research about construction management tools and methods were detected. Research guidelines: 1 Construction management: tools and methods to manage construction projects 2 environmental impact of construction projects 3 construction management and safety 4 project procurement 5 construction management for major public works & complex projects

  16. International Business Research: Past, Present and Future

    OpenAIRE

    David A Ricks

    1985-01-01

    The Editors of the Journal of International Business Studies (JIBS) always try to publish the best international business research. Unfortunately, there will probably never be a simple response to the question, What constitutes excellent international business research? We might make some progress, however, if we first attempt to define international business research and then identify several noteworthy examples.© 1985 JIBS. Journal of International Business Studies (1985) 16, 1–4

  17. EDITORIAL: Aerosol cloud interactions—a challenge for measurements and modeling at the cutting edge of cloud climate interactions

    Science.gov (United States)

    Spichtinger, Peter; Cziczo, Daniel J.

    2008-04-01

    Research in aerosol properties and cloud characteristics have historically been considered two separate disciplines within the field of atmospheric science. As such, it has been uncommon for a single researcher, or even research group, to have considerable expertise in both subject areas. The recent attention paid to global climate change has shown that clouds can have a considerable effect on the Earth's climate and that one of the most uncertain aspects in their formation, persistence, and ultimate dissipation is the role played by aerosols. This highlights the need for researchers in both disciplines to interact more closely than they have in the past. This is the vision behind this focus issue of Environmental Research Letters. Certain interactions between aerosols and clouds are relatively well studied and understood. For example, it is known that an increase in the aerosol concentration will increase the number of droplets in warm clouds, decrease their average size, reduce the rate of precipitation, and extend the lifetime. Other effects are not as well known. For example, persistent ice super-saturated conditions are observed in the upper troposphere that appear to exceed our understanding of the conditions required for cirrus cloud formation. Further, the interplay of dynamics versus effects purely attributed to aerosols remains highly uncertain. The purpose of this focus issue is to consider the current state of knowledge of aerosol/cloud interactions, to define the contemporary uncertainties, and to outline research foci as we strive to better understand the Earth's climate system. This focus issue brings together laboratory experiments, field data, and model studies. The authors address issues associated with warm liquid water, cold ice, and intermediate temperature mixed-phase clouds. The topics include the uncertainty associated with the effect of black carbon and organics, aerosol types of anthropogenic interest, on droplet and ice formation. Phases

  18. Present status of HTGR research and development

    International Nuclear Information System (INIS)

    1992-08-01

    This report briefly describes the progress of the construction of the High Temperature Engineering Test Reactor (HTTR), Research and Development (R and D) on the advanced technologies for the High Temperature Gas-cooled Reactors (HTGRs) and international cooperation in the Japan Atomic Energy Research Institute (JAERI) in 1991. (J.P.N.)

  19. Researching Stonehenge: Theories Past and Present

    Directory of Open Access Journals (Sweden)

    Mike Parker Pearson

    2013-10-01

    Full Text Available Over the years archaeologists connected with the Institute of Archaeology and UCL have made substantial contributions to the study of Stonehenge, the most enigmatic of all the prehistoric stone circles in Britain. Two of the early researchers were Petrie and Childe. More recently, colleagues in UCL’s Anthropology department – Barbara Bender and Chris Tilley – have also studied and written about the monument in its landscape. Mike Parker Pearson, who joined the Institute in 2012, has been leading a 10-year-long research programme on Stonehenge and, in this paper, he outlines the history and current state of research.

  20. Research in radiology. Present situation and perspective

    International Nuclear Information System (INIS)

    Ros, L. H.

    2003-01-01

    After having had defined the concept of research and stages of scientific method in the health field, there has been an attempt to deal with the characteristics of radiological research in the last years, as well as current and future guidelines of such. Among those items considered are the concept of teams which would be interdisciplinary and multi-centered (molecular imaging, imaging-guided therapy, early detection of illness using imaging techniques), as well as the need for certain changes in mentality. As such, there would appear a new generation of scientists (with training in molecular biology, bioengineering, physiopathology and pharmacology) who would bring to fruition an integral use of computers to complement research and imaging techniques. Finally, the concept of evidence-based radiology is analyzed, along with its principles and associated repercussions in health care and research. (Author) 15 refs

  1. Incorporating Cutting Edge Scientific Results from the Margins-Geoprisms Program into the Undergraduate Curriculum: The Subduction Factory

    Science.gov (United States)

    Penniston-Dorland, S.; Stern, R. J.; Edwards, B. R.; Kincaid, C. R.

    2014-12-01

    The NSF-MARGINS Program funded a decade of research on continental margin processes. The NSF-GeoPRISMS Mini-lesson Project, funded by NSF-TUES, is designed to integrate fundamental results from the MARGINS program into open-source college-level curriculum. Three Subduction Factory (SubFac) mini-lessons were developed as part of this project. These include hands-on examinations of data sets representing 3 key components of the subduction zone system: 1) Heat transfer in the subducted slab; 2) Metamorphic processes happening at the plate interface; and 3) Typical magmatic products of arc systems above subduction zones. Module 1: "Slab Temperatures Control Melting in Subduction Zones, What Controls Slab Temperature?" allows students to work in groups using beads rolling down slopes as an analog for the mathematics of heat flow. Using this hands-on, exploration-based approach, students develop an intuition for the mathematics of heatflow and learn about heat conduction and advection in the subduction zone environment. Module 2: "Subduction zone metamorphism" introduces students to the metamorphic rocks that form as the subducted slab descends and the mineral reactions that characterize subduction-related metamorphism. This module includes a suite of metamorphic rocks available for instructors to use in a lab, and exercises in which students compare pressure-temperature estimates obtained from metamorphic rocks to predictions from thermal models. Module 3: "Central American Arc Volcanoes, Petrology and Geochemistry" introduces students to basic concepts in igneous petrology using the Central American volcanic arc, a MARGINS Subduction Factory focus site, as an example. The module relates data from two different volcanoes - basaltic Cerro Negro (Nicaragua) and andesitic Ilopango (El Salvador) including hand sample observations and major element geochemistry - to explore processes of mantle and crustal melting and differentiation in arc volcanism.

  2. Review of present trends in luminescence research

    International Nuclear Information System (INIS)

    Williams, F.; Delaware Univ., Newark

    1981-01-01

    The difficulties of a comprehensive review of the broad and diverse branches of molecular and solid-state luminescence research are noted. This review is thus limited to selective topics. Some general concepts and trends are then introduced, including: luminescence excitation as a collective excitation of a many-body problem, encompassing in some cases the source and probe in its formulation; continuing trends towards extremal conditions of experiments and towards inhomogeneous and structured materials, from man-made superlattices to biological materials; and increased attention to applications of luminescence research to lamps, displays, solar devices and biological research. Representative recent and new specific research areas include: site selection spectroscopy and 'hole burning'; picosecond delayed coherent anti-Stokes Raman scattering; computer simulation of dynamical processes in luminescence; electron-hole expansion from the Fermi pressure of e-h plasmas; and hot electron phenomena and hot luminescence. Finally some pending problems in luminescence research, such as reconciling the configuration coordinate model and the electronic band theory and clarifying multi-phonon non-radiative processes, are discussed. (orig.)

  3. Effect of cutting edge preparation on tool performance in hard-turning of DF-3 tool steel with ceramic tools

    International Nuclear Information System (INIS)

    Davoudinejad, A.; Noordin, M. Y.

    2014-01-01

    This study presents an experimental investigation on turning hardened DF-3 tool steel (∼ 58HRC) with PVD-TiN coated mixed ceramic. We focused on the effect of chamfer and honed edge geometry on tool wear, tool life, cutting forces and surface finish of the machined work piece. The effects of the process parameters on performance characteristics were investigated using ANOVA. It was found that longer tool life was recorded with chamfered edge geometry at various cutting conditions. The typical damage observed as flank and crater wear for ceramic tools and abrasive wear was found as the main mechanism.The optimal cutting speed was 155 m/min, with which a tolerable tool life and volume of material removal was obtained for both edges geometry. Finer machined surface was left by chamfered tool with feeds and speeds in the range of 0.125-0.05 mm/rev and 155-210 m/min, respectively; also, cutting forces decrease with increased cutting speed. The obtained consequence of cutting forces shows that tool wear has a considerable effect on cutting forces and greater forces values recorded with honed tools.

  4. Effect of cutting edge preparation on tool performance in hard-turning of DF-3 tool steel with ceramic tools

    Energy Technology Data Exchange (ETDEWEB)

    Davoudinejad, A.; Noordin, M. Y. [Universiti Teknologi Malaysia, Skudai (Malaysia)

    2014-11-15

    This study presents an experimental investigation on turning hardened DF-3 tool steel (∼ 58HRC) with PVD-TiN coated mixed ceramic. We focused on the effect of chamfer and honed edge geometry on tool wear, tool life, cutting forces and surface finish of the machined work piece. The effects of the process parameters on performance characteristics were investigated using ANOVA. It was found that longer tool life was recorded with chamfered edge geometry at various cutting conditions. The typical damage observed as flank and crater wear for ceramic tools and abrasive wear was found as the main mechanism.The optimal cutting speed was 155 m/min, with which a tolerable tool life and volume of material removal was obtained for both edges geometry. Finer machined surface was left by chamfered tool with feeds and speeds in the range of 0.125-0.05 mm/rev and 155-210 m/min, respectively; also, cutting forces decrease with increased cutting speed. The obtained consequence of cutting forces shows that tool wear has a considerable effect on cutting forces and greater forces values recorded with honed tools.

  5. Cutting Edge PBPK Models and Analyses: Providing the Basis for Future Modeling Efforts and Bridges to Emerging Toxicology Paradigms

    Directory of Open Access Journals (Sweden)

    Jane C. Caldwell

    2012-01-01

    Full Text Available Physiologically based Pharmacokinetic (PBPK models are used for predictions of internal or target dose from environmental and pharmacologic chemical exposures. Their use in human risk assessment is dependent on the nature of databases (animal or human used to develop and test them, and includes extrapolations across species, experimental paradigms, and determination of variability of response within human populations. Integration of state-of-the science PBPK modeling with emerging computational toxicology models is critical for extrapolation between in vitro exposures, in vivo physiologic exposure, whole organism responses, and long-term health outcomes. This special issue contains papers that can provide the basis for future modeling efforts and provide bridges to emerging toxicology paradigms. In this overview paper, we present an overview of the field and introduction for these papers that includes discussions of model development, best practices, risk-assessment applications of PBPK models, and limitations and bridges of modeling approaches for future applications. Specifically, issues addressed include: (a increased understanding of human variability of pharmacokinetics and pharmacodynamics in the population, (b exploration of mode of action hypotheses (MOA, (c application of biological modeling in the risk assessment of individual chemicals and chemical mixtures, and (d identification and discussion of uncertainties in the modeling process.

  6. Pharmaceutical Research and Manufacturers of America

    Science.gov (United States)

    ... Trials Pediatrics The Value Collaborative 340B Science x Science Today, cutting-edge medical science is transforming patients’ ... Prescription Medicines: Costs in Context SHARE THIS The Pharmaceutical Research and Manufacturers of America, PhRMA, represents the ...

  7. Research Award: Policy and Evaluation | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-09-07

    Sep 7, 2016 ... IDRC is one of the world's leaders in generating new knowledge to meet ... research skills and gain a fresh perspective on crucial development issues. ... What is cutting-edge practice for evaluating the building of leaders?

  8. The Present Status of Psychodramatic Research.

    Science.gov (United States)

    Mann, John

    Two major trends in psychodramatic research during the last 10 years are delineated: (1) evaluating its effectiveness as a form of therapy; and (2) varying the communications process via role playing to produce attitude change. Examples of both are given. The author concludes that findings to date may well dissatisfy the practicing psychodramatist…

  9. Computer Presentation Programs and Teaching Research Methodologies

    Directory of Open Access Journals (Sweden)

    Vahid Motamedi

    2015-05-01

    Full Text Available Supplementing traditional chalk and board instruction with computer delivery has been viewed positively by students who have reported increased understanding and more interaction with the instructor when computer presentations are used in the classroom. Some problems contributing to student errors while taking class notes might be transcription of numbers to the board, and handwriting of the instructor can be resolved in careful construction of computer presentations. The use of computer presentation programs promises to increase the effectiveness of learning by making content more readily available, by reducing the cost and effort of producing quality content, and by allowing content to be more easily shared. This paper describes how problems can be overcome by using presentation packages for instruction.

  10. Computer Presentation Programs and Teaching Research Methodologies

    OpenAIRE

    Motamedi, Vahid

    2015-01-01

    Supplementing traditional chalk and board instruction with computer delivery has been viewed positively by students who have reported increased understanding and more interaction with the instructor when computer presentations are used in the classroom. Some problems contributing to student errors while taking class notes might be transcription of numbers to the board, and handwriting of the instructor can be resolved in careful construction of computer presentations. The use of computer pres...

  11. Research reactors in Austria - Present situation

    International Nuclear Information System (INIS)

    Boeck, H.; Musilek, A.; Villa, M.

    2005-01-01

    In the past decades Austria operated three research reactors, the 10 MW ASTRA reactor at Seibersdorf, the 250 kW TRIGA reactor at the Atominstitut and the 1 kW Argonaut reactor at the Technical University in Graz. Since the shut down of the ASTRA on July 31th, 1999 and its immediate decommissioning reactor and the shut down of the Argonaut reactor in Graz on August 31st, 2004 only one reactor remains operational for keeping nuclear competence in Austria which is the 250 kW TRIGA Mark II reactor. (author)

  12. Cutting edge intermediate : student's book

    CERN Document Server

    Cunningham, Sarah

    2004-01-01

    A focus on high-frequency useful vocabulary helps students say what they want to say. Regular, well-structured speaking tasks encourage students to express themselves more extensively and fluently. ‘Do You Remember’ sections in every unit and extra. Consolidation modules provide regular review and consolidation Student Books include Mini-Dictionary to help learners study independently.

  13. IBFAN: on the cutting edge.

    Science.gov (United States)

    Allain, A

    1989-01-01

    The story of IBFAN, the International Baby Food Action Network, from its beginning with 6 members in 1979, to its status of 140 groups worldwide in 1989 is told by its founder, Annelies Allain. IBFAN celebrated its 10th anniversary in October 1989 with a week-long Forum of 350 organizers from 67 countries. IBFAN is a single-tissue grass-roots organization, almost entirely women: the issue is that bottle-feeding kills babies. It has mounted a successful campaign ending in passage of the WHO/UNICEF International Code of Marketing of Breast-milk Substitutes in 1981. With this success, the political power of the "third system," of people, as opposed to government and transnational corporations, was recognized. The most important fundamental activity of IBFAN is to amass information to make its point that million of babies, primarily in developing countries, have died from consuming powdered formula instead of breast milk. IBFAN also set out to show that milk companies have influenced medical school training, health care providers, UN and WHO policies, and governments of developing countries through advertising and tax income. IBFAN's methods are boycott, corporate marketing analysis, shareholder, resolutions, and numerous strategies invented by local activists. The baby food industry responded by forming the International Council of Infant Food Industries, headed by a former WHO Assistant Director General, and applied for registration as an official NGO with the WHO. Again in 1987 they formed the Infant Food Manufacturers Associations, headed by a former WHO staff member, and gained WHO NGO status, claiming to advance infant nutrition and adhere to the WHO Code. Ibfan's current emphasis is on combatting free infant formula given out at maternity hospitals, the most effective way to block successful lactation, is developed as well as developing countries. An effort to monitor this activity will mark the 10th anniversary of the Code in 1991.

  14. The Cutting-Edge Challenge

    Science.gov (United States)

    Share, Joani

    2005-01-01

    In a time of educational budget cuts, the arts seem to take the major brunt of the financial ax. Fine arts programs are often pitted against one another for survival. The music industry and supporting corporations, such as American Express, campaign to have instruments donated or purchased to keep educational programs alive. The visual arts do not…

  15. Shearer drums - the cutting edge

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, M.; Wright, C.

    2004-09-15

    The paper discusses continuous miner and shearer cutters. It claims cutting drum require the same level of engineering know-how and technical expertise as do the machines driving them, and that the cutting drum, whether on a longwall shearer or continuous miner, comprises, the steel, pedestals, bit holders and the bits.

  16. Present status of HTGR research and development

    International Nuclear Information System (INIS)

    1991-04-01

    The HTTR is a test reactor with thermal output of 30MW and outlet coolant temperature of 950degC, employing the pin-in-block type fuel, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. The official construction of the HTTR facility is scheduled to start on March 15, 1991. This publication summarizes the present status of R and D of high temperature gas cooled reactors in JAERI. (J.P.N.)

  17. Present status of iodine research at IPSN

    Energy Technology Data Exchange (ETDEWEB)

    Bardelay, J [IPSN/DPEA/SEAC (France)

    1996-12-01

    Since several years, IPSN has conducted an effort in order to evaluate the release of radioactive iodine in case of hypothetical severe accident in a realistic manner. This source-term evaluation is performed with IODE code which is a module of the EXCADRE system of codes. This code is validated against: -analytical experiments: in these experiments, IPSN studies radiolytic effects and chemical processes in the sump, organic formation, mass transfer, effect of spray (CARAIDAS experiment), - the CAIMAN semi global experiment; this experiment will allow to study the phenomena linked to iodine behavior under representative containment geometry in the presence of painted surfaces and global irradiation, - the PHEBUS FP program. The paper consists to describe succinctly the current status of IODE and the various experiments for its validation. In case of hypothetical severe accident iodine can induce important perturbations of human organism. The effects are principally radiological, in particular on the thyroid. At short term, radioactive iodine is the most important contributor for the sanitary risk. It represents 55% of effective dose and 92% of thyroid dose at 10 km in case of controlled rejects with current assumptions. This is the reason why it must be actively studied. In France, the safety evaluations are performed with mechanistic codes or lumped parameter codes like EXCADRE which contains a module devoted to iodine studies: IODINE. The objective of the French experimental program on iodine is to understand and quantify important phenomena in order to put kinetic parameters in IODE module. The experiments can be classified in analytical experiments, the semi-global experiment CAIMAN which takes into account different phenomena studied in analytical experiments and the global experiment PHEBUS PF, not only devoted to iodine behavior study. In the following text we will present the needs of IODINE code and these different experiments. (author).

  18. Present status of iodine research at IPSN

    International Nuclear Information System (INIS)

    Bardelay, J.

    1996-01-01

    Since several years, IPSN has conducted an effort in order to evaluate the release of radioactive iodine in case of hypothetical severe accident in a realistic manner. This source-term evaluation is performed with IODE code which is a module of the EXCADRE system of codes. This code is validated against: -analytical experiments: in these experiments, IPSN studies radiolytic effects and chemical processes in the sump, organic formation, mass transfer, effect of spray (CARAIDAS experiment), - the CAIMAN semi global experiment; this experiment will allow to study the phenomena linked to iodine behavior under representative containment geometry in the presence of painted surfaces and global irradiation, - the PHEBUS FP program. The paper consists to describe succinctly the current status of IODE and the various experiments for its validation. In case of hypothetical severe accident iodine can induce important perturbations of human organism. The effects are principally radiological, in particular on the thyroid. At short term, radioactive iodine is the most important contributor for the sanitary risk. It represents 55% of effective dose and 92% of thyroid dose at 10 km in case of controlled rejects with current assumptions. This is the reason why it must be actively studied. In France, the safety evaluations are performed with mechanistic codes or lumped parameter codes like EXCADRE which contains a module devoted to iodine studies: IODINE. The objective of the French experimental program on iodine is to understand and quantify important phenomena in order to put kinetic parameters in IODE module. The experiments can be classified in analytical experiments, the semi-global experiment CAIMAN which takes into account different phenomena studied in analytical experiments and the global experiment PHEBUS PF, not only devoted to iodine behavior study. In the following text we will present the needs of IODINE code and these different experiments. (author)

  19. Design science research methods and patterns innovating information and communication technology

    CERN Document Server

    Vaishnavi, Vijay K

    2015-01-01

    Presenting innovative research methods, this second edition of a bestseller describes a simple and practical methodology for conducting cutting-edge design science research (DSR). It provides comprehensive guidance on how to conduct such research and supplies in-depth treatment of design science theory and the different types of theory that can be generated in design science research.Making novel use of the concept of patterns, it presents 84 research patterns for conducting effective DSR. It emphasizes design science theory throughout and is filled with practical examples of using patterns to

  20. Presentations

    International Nuclear Information System (INIS)

    2007-01-01

    The presented materials consist of presentations of international workshop which held in Warsaw from 4 to 5 October 2007. Main subject of the meeting was progress in manufacturing as well as research program development for neutron detector which is planned to be placed at GANIL laboratory and will be used in nuclear spectroscopy research

  1. Launching an Academic Career: On the Cutting Edge Resources for Geoscience Graduate Students, Post-doctoral Fellows, and Early Career Faculty

    Science.gov (United States)

    Richardson, R. M.; Ormand, C. J.; MacDonald, H.; Dunbar, R. W.; Allen-King, R. M.; Manduca, C. A.

    2010-12-01

    Launching an academic career presents a number of challenges. A recent article in the Chronicle of Higher Education depicts academia as an “ivory sweatshop,” citing rising standards for tenure. Most graduate programs provide minimal training for life beyond graduate school. The professional development program “On the Cutting Edge” fills this gap by providing workshops and web resources on academic careers for graduate students, postdoctoral fellows, and early career faculty. These workshops and web resources address a wide range of topics related to teaching, research, and managing one’s career, tailored for each group. The Preparing for an Academic Career in the Geosciences workshop to help graduate students and postdoctoral fellows make the transition into an academic career has been offered annually since 2003. It provides a panel on academic careers in different institutional settings, sessions on research on learning, various teaching strategies, design of effective teaching activities, moving research forward to new settings, effective teaching and research statements, the job search process, negotiation, and presenting oneself to others. Complementary online resources (http://serc.carleton.edu/NAGTWorkshops/careerprep/index.html) focus on these topics. The workshops and web resources offer guidance for each step of the job search process, for developing and teaching one’s own courses, and for making the transition from being a research student to being in charge of a research program. Online resources also include case studies of successful dual career couples, documenting their job search strategies. A four-day workshop for Early Career Geoscience Faculty: Teaching, Research, and Managing Your Career, offered annually since 1999, provides sessions on teaching strategies, course design, developing a strategic plan for research, supervising student researchers, navigating departmental and institutional politics, preparing for tenure, time and

  2. Presentations at the seventh Danish marine research meeting

    International Nuclear Information System (INIS)

    1993-01-01

    This report presents contributions from the 7th Danish marine research meeting, arranged by the Danish National Oceanologic Board the 21-24 Jan 1992 in the new Marine Geology Research centre of the Aarhus University. 310 participants presented 76 lectures and 35 posters in the field of marine geology, hydrology, biology contamination monitoring etc. (EG)

  3. African Primary Care Research: Quantitative analysis and presentation of results

    Science.gov (United States)

    Ogunbanjo, Gboyega A.

    2014-01-01

    Abstract This article is part of a series on Primary Care Research Methods. The article describes types of continuous and categorical data, how to capture data in a spreadsheet, how to use descriptive and inferential statistics and, finally, gives advice on how to present the results in text, figures and tables. The article intends to help Master's level students with writing the data analysis section of their research proposal and presenting their results in their final research report. PMID:26245435

  4. Present status and needs of research on severe core damage

    International Nuclear Information System (INIS)

    1982-05-01

    The needs for research on severe core damage accident have been emphasized recently, in particular, since TMI-2 accident. The Severe Core Damage Research Task Force was established by the Divisions of Reactor Safety and Reactor Safety Evaluation to evaluate individual phenomenon, to survey the present status of research and to provide the recommended research subjects on severe accidents. This report describes the accident phenomena involving some analytical results, status of research and recommended research subjects on severe core damage accidents, divided into accident sequence, fuel damage, and molten material behavior, fission product behavior, hydrogen generation and combustion, steam explosion and containment integrity. (author)

  5. Improving Control System Security through the Evaluation of Current Trends in Computer Security Research

    Energy Technology Data Exchange (ETDEWEB)

    Rolston

    2005-03-01

    At present, control system security efforts are primarily technical and reactive in nature. What has been overlooked is the need for proactive efforts, focused on the IT security research community from which new threats might emerge. Evaluating cutting edge IT security research and how it is evolving can provide defenders with valuable information regarding what new threats and tools they can anticipate in the future. Only known attack methodologies can be blocked, and there is a gap between what is known to the general security community and what is being done by cutting edge researchers --both those trying to protect systems and those trying to compromise them. The best security researchers communicate with others in their field; they know what cutting edge research is being done; what software can be penetrated via this research; and what new attack techniques and methodologies are being circulated in the black hat community. Standardization of control system applications, operating systems, and networking protocols is occurring at a rapid rate, following a path similar to the standardization of modern IT networks. Many attack methodologies used on IT systems can be ported over to the control system environment with little difficulty. It is extremely important to take advantage of the lag time between new research, its use on traditional IT networks, and the time it takes to port the research over for use on a control system network. Analyzing nascent trends in IT security and determining their applicability to control system networks provides significant information regarding defense mechanisms needed to secure critical infrastructure more effectively. This work provides the critical infrastructure community with a better understanding of how new attacks might be launched, what layers of defense will be needed to deter them, how the attacks could be detected, and how their impact could be limited.

  6. CCR presentations at AACR - 2018 | Center for Cancer Research

    Science.gov (United States)

    CCR presentations at AACR Several CCR scientists will present their research at the AACR Annual Meeting in Chicago, IL, between April 14-18, 2018. Selected oral presentations are listed below. A full list of abstracts can be found on the AACR website.

  7. CCR presentations at AACR | Center for Cancer Research

    Science.gov (United States)

    CCR presentations at AACR Several CCR scientists will present their research at the AACR Annual Meeting in Washington, D.C., between April 1-5, 2017. Selected oral presentations are listed below. A full list of abstracts can be found on the AACR website.

  8. Ayurvedic research and methodology: Present status and future strategies.

    Science.gov (United States)

    Chauhan, Ashutosh; Semwal, Deepak Kumar; Mishra, Satyendra Prasad; Semwal, Ruchi Badoni

    2015-01-01

    Ayurveda is a science of life with a holistic approach to health and personalized medicine. It is one of the oldest medical systems, which comprises thousands of medical concepts and hypothesis. Interestingly, Ayurveda has ability to treat many chronic diseases such as cancer, diabetes, arthritis, and asthma, which are untreatable in modern medicine. Unfortunately, due to lack of scientific validation in various concepts, this precious gift from our ancestors is trailing. Hence, evidence-based research is highly needed for global recognition and acceptance of Ayurveda, which needs further advancements in the research methodology. The present review highlights various fields of research including literary, fundamental, drug, pharmaceutical, and clinical research in Ayurveda. The review further focuses to improve the research methodology for Ayurveda with main emphasis on the fundamental research. This attempt will certainly encourage young researchers to work on various areas of research for the development and promotion of Ayurveda.

  9. Ayurvedic research and methodology: Present status and future strategies

    Science.gov (United States)

    Chauhan, Ashutosh; Semwal, Deepak Kumar; Mishra, Satyendra Prasad; Semwal, Ruchi Badoni

    2015-01-01

    Ayurveda is a science of life with a holistic approach to health and personalized medicine. It is one of the oldest medical systems, which comprises thousands of medical concepts and hypothesis. Interestingly, Ayurveda has ability to treat many chronic diseases such as cancer, diabetes, arthritis, and asthma, which are untreatable in modern medicine. Unfortunately, due to lack of scientific validation in various concepts, this precious gift from our ancestors is trailing. Hence, evidence-based research is highly needed for global recognition and acceptance of Ayurveda, which needs further advancements in the research methodology. The present review highlights various fields of research including literary, fundamental, drug, pharmaceutical, and clinical research in Ayurveda. The review further focuses to improve the research methodology for Ayurveda with main emphasis on the fundamental research. This attempt will certainly encourage young researchers to work on various areas of research for the development and promotion of Ayurveda. PMID:27833362

  10. The present status of research at the Magnetic Observatory

    International Nuclear Information System (INIS)

    Sutcliffe, P.R.

    1982-01-01

    The purpose of this presentation is to outline research presently being pursued at the Magnetic Obsservatory. In order to appreciate this research, it is necessary that we first briefly examine the laboratory in which it is carried out, namely, the earth's magnetic environment. We then review each of the research fields in turn. The first two with which we deal are magnetospheric substorms and geomagnetic pulsations, which have their origins far above the earth's surface in the region known as the magnetosphere. Then coming closer to earth we consider solar quiet time (Sq) variations which originate mainly in the ionosphere. Next, down on earth, we look at a recently commenced project to model the surface geomagnetic field. Finally, going below ground level, we consider magneto-telluric studies. For each of these research projects, we present a general background description, describe some specific research results obtained by Magnetic Observatory staff over the past few years, and point out projects planned for the future

  11. Film Music: The Material, Literature and Present State of Research.

    Science.gov (United States)

    Marks, Martin

    1982-01-01

    A comprehensive look at the neglected art of film music. Examines the nature of the medium, the literature (how others have wrestled with film music's recalcitrant materials), and the present state of research into film music. Includes a bibliography. (PD)

  12. The present state of social science research in Asia

    NARCIS (Netherlands)

    Lieten, G.K.

    2014-01-01

    The first pan-Asia conference ‘Status and Role of Social Science Research in Asia, Emerging Challenges and Policy Issues’ (New Delhi, 13-15 March 2014), with representatives from 24 countries in Asia and some non-Asian countries, was intended to assess the present state of social science research in

  13. Present status of research and development on underground disposal

    International Nuclear Information System (INIS)

    1994-11-01

    Power Reactor and Nuclear Fuel Development Corporation published the technical report 'Research and development of the formation disposal of high level radioactive waste' 1991 in 1992, summarizing the results of the research and development of the formation disposal which have been advanced by dividing into three parts, that is, the investigation and research of geological environment conditions, the research and development of disposal technologies, and the research on the performance evaluation. Based on the subjects pointed out during the process of making the technical report, the results of evaluation by the state, and the opinions of those concerned, the efforts are exerted toward the second summarization expected in about 2000. By informing the present state of the research and development, in order to accept the criticism and advice, this book was published. The way of thinking and the method of advancing of the research and development of formation disposal, the present state of the research on geological environment conditions, disposal technologies and the performance evaluation are described. Also the present state of the research on stratum science in Tono and Kamaishi mines and others is reported. (K.I.)

  14. Present status of research and development on underground disposal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-11-01

    Power Reactor and Nuclear Fuel Development Corporation published the technical report `Research and development of the formation disposal of high level radioactive waste` 1991 in 1992, summarizing the results of the research and development of the formation disposal which have been advanced by dividing into three parts, that is, the investigation and research of geological environment conditions, the research and development of disposal technologies, and the research on the performance evaluation. Based on the subjects pointed out during the process of making the technical report, the results of evaluation by the state, and the opinions of those concerned, the efforts are exerted toward the second summarization expected in about 2000. By informing the present state of the research and development, in order to accept the criticism and advice, this book was published. The way of thinking and the method of advancing of the research and development of formation disposal, the present state of the research on geological environment conditions, disposal technologies and the performance evaluation are described. Also the present state of the research on stratum science in Tono and Kamaishi mines and others is reported. (K.I.).

  15. Partnering for functional genomics research conference: Abstracts of poster presentations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    This reports contains abstracts of poster presentations presented at the Functional Genomics Research Conference held April 16--17, 1998 in Oak Ridge, Tennessee. Attention is focused on the following areas: mouse mutagenesis and genomics; phenotype screening; gene expression analysis; DNA analysis technology development; bioinformatics; comparative analyses of mouse, human, and yeast sequences; and pilot projects to evaluate methodologies.

  16. Present status and future prospect of research reactors

    International Nuclear Information System (INIS)

    Takemi, Hirokatsu

    1996-01-01

    The present status of research reactors more than MW class reactor in JAERI and the Kyoto University and the small reactors in the Musashi Institute of Technology, the Rikkyo University, the Tokyo University, the Kinki University and other countries are explained in the paper. The present status of researches are reported by the topics in each field. The future researches of the beam reactor and the irradiation reactor are reviewed. On various kinds of use of research reactor and demands of neutron field of a high order, new type research reactors under investigation are explained. Recently, the reactors are used in many fields such as the basic science: the basic physics, the material science, the nuclear physics, and the nuclear chemistry and the applied science; the earth and environmental science, the biology and the medical science. (S.Y.)

  17. Presentation of research in anesthesia: Culmination into publication?

    Directory of Open Access Journals (Sweden)

    Asha Tyagi

    2013-01-01

    Full Text Available Background: To assess the quality of research presentations made in conferences, its success or failure to be published in a peer-reviewed journal is a well-accepted marker. However, there is no data regarding the publication of research presentations made in Indian conferences of anesthesiology. Objective: The primary objective was to determine publication rate of research presented at the largest and best attended national conference in anesthesiology, the Indian Society of Anaesthesiologists′ Conference (ISACON, and also compare it with the rate from an international conference American Society of Anesthesiologists (ASA annual meeting held in the same year. Materials and Methods: All 363 abstracts presented as poster or podium presentations at the ISACON, and an equal number of randomly selected abstracts presented at ASA annual meeting were searched on Pubmed and Google Scholar for their full-text publications in peer-reviewed journals using a standardized search strategy. As secondary observations, abstracts were assessed for completeness by noting certain components central to research methodology. Also, changes between abstract of the presentation and published paper were noted with respect to certain components. Results: The publication rate of presentations at ISACON and ASA meetings was 5% and 22%, respectively. The abstracts from ISACON lacked central components of research such as methods and statistical tests. The commonest change in the full-text publications as compared with the original abstract from both conferences was a change in authorship. Conclusion: Steps are required to augment full-text publication of Indian research, including a more rigorous peer review of abstracts submitted to ISACON to ensure their completeness.

  18. Stem cell research in pakistan; past, present and future.

    Science.gov (United States)

    Zahra, Sayeda Anum; Muzavir, Sayed Raheel; Ashraf, Sadia; Ahmad, Aftab

    2015-05-01

    Stem cells have proved to have great therapeutic potential as stem cell treatment is replacing traditional ways of treatment in different disorders like cancer, aplastic anemia, stroke, heart disorders. The developed and developing countries are investing differently in this area of research so research output and clinical translation of research greatly vary among developed and developing countries. Present study was done to investigate the current status of stem cells research in Pakistan and ways to improve it. Many advanced countries (USA, UK and Canada etc.) are investing heavily in stem cell research and treatment. Different developing countries like Iran, Turkey and India are also following the developed countries and investing a lot in stem cells research. Pakistan is also making efforts in establishing this field to get desired benefits but unfortunately the progress is at very low pace. If Government plays an active role along with private sector, stem cell research in Pakistan can be boosted up. The numbers of publications from Pakistan are very less compared to developed and neighboring countries and Pakistan also has very less number of institutes working in this area of research. Stem cells research is at its initial stages in Pakistan and there is great need to bring Government, academia and industry together so they could make serious efforts to promote research in this very important field. This will help millions of patients suffering from incurable disorders and will also reduce economic loss.

  19. Identifying Key Features, Cutting Edge Cloud Resources, and Artificial Intelligence Tools to Achieve User-Friendly Water Science in the Cloud

    Science.gov (United States)

    Pierce, S. A.

    2017-12-01

    Decision making for groundwater systems is becoming increasingly important, as shifting water demands increasingly impact aquifers. As buffer systems, aquifers provide room for resilient responses and augment the actual timeframe for hydrological response. Yet the pace impacts, climate shifts, and degradation of water resources is accelerating. To meet these new drivers, groundwater science is transitioning toward the emerging field of Integrated Water Resources Management, or IWRM. IWRM incorporates a broad array of dimensions, methods, and tools to address problems that tend to be complex. Computational tools and accessible cyberinfrastructure (CI) are needed to cross the chasm between science and society. Fortunately cloud computing environments, such as the new Jetstream system, are evolving rapidly. While still targeting scientific user groups systems such as, Jetstream, offer configurable cyberinfrastructure to enable interactive computing and data analysis resources on demand. The web-based interfaces allow researchers to rapidly customize virtual machines, modify computing architecture and increase the usability and access for broader audiences to advanced compute environments. The result enables dexterous configurations and opening up opportunities for IWRM modelers to expand the reach of analyses, number of case studies, and quality of engagement with stakeholders and decision makers. The acute need to identify improved IWRM solutions paired with advanced computational resources refocuses the attention of IWRM researchers on applications, workflows, and intelligent systems that are capable of accelerating progress. IWRM must address key drivers of community concern, implement transdisciplinary methodologies, adapt and apply decision support tools in order to effectively support decisions about groundwater resource management. This presentation will provide an overview of advanced computing services in the cloud using integrated groundwater management case

  20. UZIG USGS research: Advances through interdisciplinary interaction

    Science.gov (United States)

    Nimmo, J.R.; Andraski, Brian J.; Rafael, M.-C.

    2009-01-01

    BBecause vadose zone research relates to diverse disciplines, applications, and modes of research, collaboration across traditional operational and topical divisions is especially likely to yield major advances in understanding. The Unsaturated Zone Interest Group (UZIG) is an informal organization sponsored by the USGS to encourage and support interdisciplinary collaboration in vadose or unsaturated zone hydrologic research across organizational boundaries. It includes both USGS and non-USGS scientists. Formed in 1987, the UZIG operates to promote communication, especially through periodic meetings with presentations, discussions, and field trips. The 10th meeting of the UZIG at Los Alamos, NM, in August 2007 was jointly sponsored by the USGS and Los Alamos National Laboratory. Presentations at this meeting served as the initial basis for selecting papers for this special section of Vadose Zone Journal, the purpose of which is to present noteworthy cutting-edge unsaturated zone research promoted by, facilitated by, or presented in connection with the UZIG.

  1. Radioisotopes and fungicide research- present status and future prospects

    International Nuclear Information System (INIS)

    Chatrath, M.S.

    1996-01-01

    The developments in pesticides and radioisotopes fields were so near to each other that at a very early stage in this history, both became linked together and their usefulness was recognised for faster development. The purpose of this communication is to illustrate the present status these techniques in fungicide research by drawing suitable examples and also to bring out the directions in which future research will be going with the aid of these tools. 72 refs

  2. Presentations

    International Nuclear Information System (INIS)

    2007-01-01

    The PARIS meeting held in Cracow, Poland from 14 to 15 May 2007. The main subjects discussed during this meeting were the status of international project dedicated to gamma spectroscopy research. The scientific research program includes investigations of giant dipole resonance, probe of hot nuclei induced in heavy reactions, Jacobi shape transitions, isospin mixing and nuclear multifragmentation. The mentioned programme needs Rand D development such as new scintillations materials as lanthanum chlorides and bromides as well as new photo detection sensors as avalanche photodiodes - such subjects are also subjects of discussion. Additionally results of computerized simulations of scintillation detectors properties by means of GEANT- 4 code are presented

  3. Social network analysis: Presenting an underused method for nursing research.

    Science.gov (United States)

    Parnell, James Michael; Robinson, Jennifer C

    2018-06-01

    This paper introduces social network analysis as a versatile method with many applications in nursing research. Social networks have been studied for years in many social science fields. The methods continue to advance but remain unknown to most nursing scholars. Discussion paper. English language and interpreted literature was searched from Ovid Healthstar, CINAHL, PubMed Central, Scopus and hard copy texts from 1965 - 2017. Social network analysis first emerged in nursing literature in 1995 and appears minimally through present day. To convey the versatility and applicability of social network analysis in nursing, hypothetical scenarios are presented. The scenarios are illustrative of three approaches to social network analysis and include key elements of social network research design. The methods of social network analysis are underused in nursing research, primarily because they are unknown to most scholars. However, there is methodological flexibility and epistemological versatility capable of supporting quantitative and qualitative research. The analytic techniques of social network analysis can add new insight into many areas of nursing inquiry, especially those influenced by cultural norms. Furthermore, visualization techniques associated with social network analysis can be used to generate new hypotheses. Social network analysis can potentially uncover findings not accessible through methods commonly used in nursing research. Social networks can be analysed based on individual-level attributes, whole networks and subgroups within networks. Computations derived from social network analysis may stand alone to answer a research question or incorporated as variables into robust statistical models. © 2018 John Wiley & Sons Ltd.

  4. Thoughts on environmental actinide research-future and present situation

    International Nuclear Information System (INIS)

    Yamamoto, Masayoshi

    2002-01-01

    Thoughts on environmental actinides, especially transuranium elements, are presented with emphasis on present situation and future researches. It is since 1945 that man has been in direct relationship to the significant quantities of such transuranium elements, although Pu was discovered in 1942 to exist in very small quantities in nature. Substantial amounts of these elements (Np, Pu, Am) have been distributed in the environment mainly as the result of nuclear weapon testing, followed by accident of satellite and release of radioactive substances from nuclear facilities. Chernobyl nuclear power plant accident might serve as a most recent example of such release. Considerable efforts have been devoted to the investigation of the processes involved in the transfer of radionuclides in the environment and how these can be influenced. And, many data (levels and distribution) and knowledge to understand these processes have been obtained and accumulated. The final purpose in all the research was the protection of the human being. The present trends for environmental radioactivity research (or radioecology) involves a further development of models, speciation of radionuclides, tracer studies and countermeasures of other species than man in radiological protection. Joint researches between radioecologists and specialists such as meteorology, oceanography, geology, botany, statistics and so on are more and more needed to make one of the most fascinating environmental sciences. Finally, an effort should be made to develop radioecology into a more hypothesis-oriented science, as mentioned by Platt. (author)

  5. Cutting edges and weaving threads in the gene editing (Я)evolution: reconciling scientific progress with legal, ethical, and social concerns

    Science.gov (United States)

    Holm, Sune; Horst, Maja; Mortensen, Kell; Møller, Birger Lindberg

    2018-01-01

    Abstract Gene-editing technology, such as CRISPR/Cas9, holds great promise for the advancement of science and many useful applications technology. This foundational technology enables modification of the genetic structure of any living organisms with unprecedented precision. Yet, in order to enhance its potential for societal benefit, it is necessary to adapt rules and produce adequate regulations. This requires an interdisciplinary effort in legal thinking. Any legislative initiative needs to consider both the benefits and the problematic aspects of gene editing, from a broader societal and value-based perspective. This paper stems from an interdisciplinary research project seeking to identify and discuss some of the most pressing legal implications of gene-editing technology and how to address these. While the questions raised by gene editing are global, laws and regulations are to a great extent bound by national borders. This paper presents a European perspective, written for a global audience, and intends to contribute to the global debate. The analysis will include brief references to corresponding USA rules in order to place these European debates in the broader international context. Our legal analysis incorporates interdisciplinary contributes concerning the scientific state of the art, philosophical thinking regarding the precautionary principle and dual-use issues as well as the importance of communication, social perception, and public debate. Focusing mainly in the main regulatory and patent law issues, we will argue that (a) general moratoriums and blank prohibitions do a disservice to science and innovation; (b) it is crucial to carefully consider a complex body of international and European fundamental rights norms applicable to gene editing; (c) these require further developments grounded in consistent and coherent implementation and interpretation; (d) legal development should follow a critical contextual approach capable of integrating

  6. GeoMapApp Learning Activities: Grab-and-go inquiry-based geoscience activities that bring cutting-edge technology to the classroom

    Science.gov (United States)

    Goodwillie, A. M.; Kluge, S.

    2011-12-01

    NSF-funded GeoMapApp Learning Activities (http://serc.carleton.edu/geomapapp) provide self-contained learning opportunities that are centred around the principles of guided inquiry. The activities allow students to interact with and analyse research-quality geoscience data to explore and enhance student understanding of underlying geoscience content and concepts. Each activity offers ready-to-use step-by-step student instructions and answer sheets that can be downloaded from the web page. Also provided are annotated teacher versions of the worksheets that include teaching tips, additional content and suggestions for further work. Downloadable pre- and post- quizzes tied to each activity help educators gauge the learning progression of their students. Short multimedia tutorials and details on content alignment with state and national teaching standards round out the package of material that comprises each "grab-and-go" activity. GeoMapApp Learning Activities expose students to content and concepts typically found at the community college, high school and introductory undergraduate levels. The activities are based upon GeoMapApp (http://www.geomapapp.org), a free, easy-to-use map-based data exploration and visualisation tool that allows students to access a wide range of geoscience data sets in a virtual lab-like environment. Activities that have so far been created under this project include student exploration of seafloor spreading rates, a study of mass wasting as revealed through geomorphological evidence, and an analysis of plate motion and hotspot traces. The step-by-step instructions and guided inquiry approach lead students through each activity, thus reducing the need for teacher intervention whilst also boosting the time that students can spend on productive exploration and learning. The activities can be used, for example, in a classroom lab with the educator present and as self-paced assignments in an out-of-class setting. GeoMapApp Learning Activities

  7. Past and present situation of nuclear research at Forschungszentrum Karlsruhe

    International Nuclear Information System (INIS)

    Scholtyssek, W.

    2001-01-01

    The case of Forschungszentrum Karlsruhe is presented which had to transform from a centre devoted to nuclear power R and D to one in which this activity is allocated only 20% of the resources. A large number of operating nuclear power reactors coupled with the Government decision to phase out nuclear power is causing serious concerns regarding the availability of human resources for meeting the long term needs of nuclear facilities. The Energy Division of the research centre currently focuses mainly on safety research and on nuclear fusion. Another Division of the centre has nuclear facility decommissioning as one of the programmes. Independent research in areas of essential need for nuclear facilities must be carried out to maintain know how. (author)

  8. Status of marine pollution research in South Africa (1960-present).

    Science.gov (United States)

    Wepener, V; Degger, N

    2012-07-01

    The published literature on marine pollution monitoring research in South Africa from 1960 to present was evaluated. There has been a general decline in the number of papers from the 1980s and this can be linked to the absence of a marine pollution monitoring programme in South Africa. General trends observed were that contaminant exposure monitoring of metals predominates the research conducted to date. Monitoring results indicate that there has been a general decrease in metal concentrations in South African coastal waters and concentrations of metals and most organics in mussels are lower than in other industrialised nations. This is reflected in the general pristine nature and high biodiversity of the South African coastline. The establishment of a national marine pollution monitoring framework would stimulate marine pollution research. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Present state and perspective of research on thorium cycle

    International Nuclear Information System (INIS)

    Kimura, Itsuro

    1994-01-01

    For the prosperity of Japan and the welfare of mankind in the world, enormous quantity of energy is required in 21st century, and the general circumstances of energy and nuclear power are described. In addition to the present nuclear power using mostly 235 U and the plutonium produced from 238 U, it is the thorium cycle that 233 U produced from the third nuclear fuel, thorium, is used for electric power generation as an energy source. In this report, the 'General research on thorium cycle as a promising energy source in and after 21st century' is outlined, which has been advanced by accepting the subsidy of scientific research expense of the Ministry of Education. The features of the thorium cycle and the nuclear data and the nuclear characteristics in comparison with uranium-plutonium reactors are described. The trend of the research and development in the world and in Japan is reported. Two general researches were carried out for five years from fiscal year 1988 to 1992 on the thorium cycle. The results of the research on the nuclear data, the design of thorium reactors, the criticality experiment and analysis, thorium hybrid, thorium fuel, molten salt, fuel reprocessing and radiation safety are reported. (K.I.)

  10. Present status of research reactor decommissioning programme in Indonesia

    International Nuclear Information System (INIS)

    Suripto, A.; Mulyanto, N.

    2002-01-01

    At present Indonesia has 3 research reactors, namely the 30 MW MTR-type multipurpose reactor at Serpong Site, two TRIGA-type research reactors, the first one being 1 MW located at Bandung Site and the second one a small reactor of 100 kW at Yogyakarta Site. The TRIGA Reactor at the Bandung Site reached its first criticality at 250 kW in 1964, and then was operated at 1000 kW since 1971. In October 2000 the reactor power was successfully upgraded to 2 MW. This reactor has already been operated for 38 years. There is not yet any decision for the decommissioning of this reactor. However it will surely be an object for the near future decommissioning programme and hence anticipation for the above situation becomes necessary. The regulation on decommissioning of research reactor is already issued by the independent regulatory body (BAPETEN) according to which the decommissioning permit has to be applied by the BATAN. For Indonesia, an early decommissioning strategy for research reactor dictates a restricted re-use of the site for other nuclear installation. This is based on high land price, limited availability of radwaste repository site, and other cost analysis. Spent graphite reflector from the Bandung TRIGA reactor is recommended for a direct disposal after conditioning, without any volume reduction treatment. Development of human resources, technological capability as well as information flow from and exchange with advanced countries are important factors for the future development of research reactor decommissioning programme in Indonesia. (author)

  11. Present role of PIXE in atmospheric aerosol research

    Energy Technology Data Exchange (ETDEWEB)

    Maenhaut, Willy, E-mail: Willy.Maenhaut@UGent.be

    2015-11-15

    In the 1980s and 1990s nearly half of the elemental analyses of atmospheric aerosol samples were performed by PIXE. Since then, other techniques for elemental analysis became available and there has been a steady increase in studies on organic aerosol constituents and other aspects of aerosols, especially in the areas of nucleation (new particle formation), optical properties, and the role of aerosol particles in cloud formation and properties. First, a brief overview and discussion is given of the developments and trends in atmospheric aerosol analysis and research of the past three decades. Subsequently, it is indicated that there is still invaluable work to be done by PIXE in atmospheric aerosol research, especially if one teams up with other aerosol researchers and performs complementary measurements, e.g., on small aerosol samples that are taken with high-time resolution. Fine examples of such research are the work done by the Lund group in the CARIBIC aircraft studies and the analysis of circular streaker samples by the Florence PIXE group. These and other examples are presented and other possibilities of PIXE are indicated.

  12. Present status of tritium research activities at universities in Japan

    International Nuclear Information System (INIS)

    Kawamura, K.

    1983-01-01

    The behaviours of tritium towards various materials are very similar to those of hydrogen, since tritium is one of the hydrogen isotope. In addition to those properties, tritium shows the radiochemical and radiological reactivities due to an emitted #betta#-ray. The permeability of tritium through various materials is the example of the former. The formation of tritiated methane in tritium stored in stainless steel vessels and the increase of helium content in tritium-bearing metallic materials are the examples of the latter. For these reasons, advanced and somewhat more complicated techniques are required for handling tritium. After the Ministry of Education, Science and Culture (MOE) made an appropriation on Grant-in-Aid for Fusion Research in 1975 year's budget, development of tritium handling technology for fusion reactors have been actively pursued. The specific experiments to be embodied in present research activities are: 1. Measurements of tritium permeation rate through various materials. 2. Fundamental studies on tritium containment materials. 3. Fundamental studies of tritium waste treatment and storage. In this paper, the works achieved under the above research activities are described and some results obtained from experiments are reported. (author)

  13. Summary and synthesis: How to present a research proposal

    Directory of Open Access Journals (Sweden)

    Maninder Singh Setia

    2017-01-01

    Full Text Available This concluding module attempts to synthesize the key learning points discussed during the course of the previous ten sets of modules on methodology and biostatistics. The objective of this module is to discuss how to present a model research proposal, based on whatever was discussed in the preceding modules. The lynchpin of a research proposal is the protocol, and the key component of a protocol is the study design. However, one must not neglect the other areas, be it the project summary through which one catches the eyes of the reviewer of the proposal, or the background and the literature review, or the aims and objectives of the study. Two critical areas in the “methods” section that cannot be emphasized more are the sampling strategy and a formal estimation of sample size. Without a legitimate sample size, none of the conclusions based on the statistical analysis would be valid. Finally, the ethical parameters of the study should be well understood by the researchers, and that should get reflected in the proposal.

  14. Summary and Synthesis: How to Present a Research Proposal.

    Science.gov (United States)

    Setia, Maninder Singh; Panda, Saumya

    2017-01-01

    This concluding module attempts to synthesize the key learning points discussed during the course of the previous ten sets of modules on methodology and biostatistics. The objective of this module is to discuss how to present a model research proposal, based on whatever was discussed in the preceding modules. The lynchpin of a research proposal is the protocol, and the key component of a protocol is the study design. However, one must not neglect the other areas, be it the project summary through which one catches the eyes of the reviewer of the proposal, or the background and the literature review, or the aims and objectives of the study. Two critical areas in the "methods" section that cannot be emphasized more are the sampling strategy and a formal estimation of sample size. Without a legitimate sample size, none of the conclusions based on the statistical analysis would be valid. Finally, the ethical parameters of the study should be well understood by the researchers, and that should get reflected in the proposal.

  15. Water research to support society: past, present and future

    Science.gov (United States)

    Arheimer, Berit

    2014-05-01

    Scientists are nowadays claiming that we are leaving the geological era of Holocene and have entered the Anthropocene (the Age of Man), a man-made world, in which humans are not observers of nature but central to its workings and commanding the planet's features, fluxes and material cycles. Both the hydrological and the biogeochemical cycles are radically changed compared to pristine conditions and the biodiversity is radically declining as the human population is growing. The co-evolution between society and environment is complex and not always reversible and we therefore need more research on effects of change to raise awareness and prepare for consequences. Many problems caused by humans are also well recognized and can be remediated. As the society develops also the environmental concerns normally becomes more important leading to remedial measures and pollution control. The change in water quality for many rivers world-wide shows similar flux over time related to level of economic development, going from deterioration to recovery as an effect of improved water management. Water management is of major importance for sustainable development, both for efficient water use and ecosystem protection. Water management should be based on (i) best available site information and (ii) best practices from understanding cause-effect relationships; yet, large areas still remains un-monitored and the relations between processes are complex and often not well understood. These knowledge gaps hamper the societal development and are thus two key challenges to address in the hydrological sciences initiative Panta Rhei. This presentation will address some of these challenges for water research in the past, present and future. Hydrology is by tradition an applied research, in which scientific questions co-evolve with societal needs. This will be exemplified this by giving a brief overview of the shift in research questions at one national institute, SMHI, during the last 100 years

  16. The University of Kansas High-Throughput Screening Laboratory. Part II: enabling collaborative drug-discovery partnerships through cutting-edge screening technology.

    Science.gov (United States)

    McDonald, Peter R; Roy, Anuradha; Chaguturu, Rathnam

    2011-07-01

    The University of Kansas High-Throughput Screening (KU HTS) core is a state-of-the-art drug-discovery facility with an entrepreneurial open-service policy, which provides centralized resources supporting public- and private-sector research initiatives. The KU HTS core was established in 2002 at the University of Kansas with support from an NIH grant and the state of Kansas. It collaborates with investigators from national and international academic, nonprofit and pharmaceutical organizations in executing HTS-ready assay development and screening of chemical libraries for target validation, probe selection, hit identification and lead optimization. This is part two of a contribution from the KU HTS laboratory.

  17. Research handbook on entrepreneurial opportunities

    DEFF Research Database (Denmark)

    With a wide-ranging set of contributions, this book provides a compilation of cutting-edge original research in the field of entrepreneurial opportunities. The book reopens the subject from diverse perspectives focusing on theories and approaches to entrepreneurial opportunities. The book has been...... interested in the field of entrepreneurial opportunities....

  18. Purification of a Fe-SOD excreted by Leishmania braziliensis for specific antibodies detection in Mexican human sera: Cutting-edge the knowledge

    Directory of Open Access Journals (Sweden)

    Silvia Stefania Longoni

    2016-06-01

    Full Text Available Clinical diagnosis of leishmaniasis is highly complex, presenting a wide range of clinical manifestations, sometimes non-specific, and thus the epidemiological study and diagnostic need specific molecular markers for each Leishmania species. Leishmania spp. posses different Fe-SOD isoforms, one of which is excreted into the external milieu and, presenting immunogenic characteristics, is a very reliable molecular marker. Superoxide dismutases (SODs are antioxidant metal-enzymes responsible for the dismutation of superoxide ion into hydrogen peroxide and molecular oxygen, and it is considered an important virulence factor. In this manuscript we have purified the iron(Fe-SOD excreted by Leishmania braziliensis using ion-exchange and molecular-sieve chromatography and we have studied it as an antigen in serodiagnostic analyses in ELISA and Western blot techniques, testing 213 human sera from Mexico. Indeed, L. braziliensis Fe-SODe has been purified 123.26 times with a specific activity of about 893.66 U/mg of protein. Applying the purified enzymes in serological tests we found 17.84% sera positive. We have demonstrated that the purified enzyme is more sensitive than the non-purified ones and we also demonstrated, for the first time, the presence of antibodies against L. braziliensis, not the main species in the country, in human population from Hidalgo and Nuevo Leon States.

  19. Presentation of the Nirex disposal safety research programme

    International Nuclear Information System (INIS)

    1988-01-01

    Implementation of Nirex plans for the disposal of solid low and intermediate level radioactive waste deep underground requires assurances of safety at every stage. This includes assessment of long-term safety, which must be based on an understanding of how the repository and its contents will behave far into the future. This understanding is being provided by the company's substantial disposal research and development programme, currently running at a level of more than Pound 5 million annually. The principal contractor for the work is the UKAEA's Harwell Laboratory, with contributions from experts in universities and industry. Information from other national and international programmes also contributes. This document supports a presentation held at the CEGB Conference Centre, Didcot Power Station, Oxfordshire on 1st November 1988 to outline the scope of the work and its objectives in the context of the Company's plans and the requirements of safety assessments. It summarises the results and understanding being obtained from the current programme. (author)

  20. From university research to commercial product (Conference Presentation)

    Science.gov (United States)

    Mathuis, Philip

    2016-03-01

    Ovizio Imaging Systems, a quantitative microscopic imaging spin-off of the Université Libre de Bruxelles, Belgium, was founded in the beginning of 2010 by Philip Mathuis, Serge Jooris, Prof. Frank Dubois and Dr. Catherine Yourassowky. The company has launched a range of specialized microscopy instruments for quantitative imaging mainly focused on the bioprocessing and diagnostics fields within the life sciences market. During my talk I will present the story of how an idea, emerged from the research labs of the University made it to a manufactured and sold product. The talk will look at many aspects of entrepreneurship and setting up a company, finding the funding for the project, attracting people, industrialization and product design and commercialization. It will also be focused on choices one has to make during the start-up phase and methodologies that can be applied in many different settings.

  1. IMPACT OF DEPTH OF CUT ON CHIP FORMATION IN AZ91HP MAGNESIUM ALLOY MILLING WITH TOOLS OF VARYING CUTTING EDGE GEOMETRY

    Directory of Open Access Journals (Sweden)

    Olga Gziut

    2015-05-01

    Full Text Available Safety of Mg milling processes can be expressed by means of the form and the number of fractions of chips formed during milling. This paper presents the state of the art of magnesium alloys milling technology in the aspect of chip fragmentation. Furthermore, the impact of the depth of cut ap and the rake angle γ on the number of chip fractions was analysed in the study. These were conducted on AZ91HP magnesium cast alloy and milling was performed with carbide tools of varying rake angle values (γ = 5º and γ = 30º. It was observed that less intense chip fragmentation occurs with decreasing depth of cut ap. The number of chip fractions was lower at the tool rake angle of γ = 30º. The test results were formulated as technological recommendations according to the number of generated chip fractions.

  2. Cutting Edge: The murine high-affinity IgG receptor FcγRIV is sufficient for autoantibody-induced arthritis.

    Science.gov (United States)

    Mancardi, David A; Jönsson, Friederike; Iannascoli, Bruno; Khun, Huot; Van Rooijen, Nico; Huerre, Michel; Daëron, Marc; Bruhns, Pierre

    2011-02-15

    K/BxN serum-induced passive arthritis was reported to depend on the activation of mast cells, triggered by the activating IgG receptor FcγRIIIA, when engaged by IgG1 autoantibodies present in K/BxN serum. This view is challenged by the fact that FcγRIIIA-deficient mice still develop K/BxN arthritis and because FcγRIIIA is the only activating IgG receptor expressed by mast cells. We investigated the contribution of IgG receptors, IgG subclasses, and cells in K/BxN arthritis. We found that the activating IgG2 receptor FcγRIV, expressed only by monocytes/macrophages and neutrophils, was sufficient to induce disease. K/BxN arthritis occurred not only in mast cell-deficient W(sh) mice, but also in mice whose mast cells express no activating IgG receptors. We propose that at least two autoantibody isotypes, IgG1 and IgG2, and two activating IgG receptors, FcγRIIIA and FcγRIV, contribute to K/BxN arthritis, which requires at least two cell types other than mast cells, monocytes/macrophages, and neutrophils.

  3. Re-Presenting, Performing Critical/Post-Critical Research Realities

    Science.gov (United States)

    Heimans, Stephen; Singh, Parlo

    2016-01-01

    The aim of this paper is to focus on the relations between theory and research methods in educational research by mapping out our own research journeys. The paper arises out of a plenary talk at a "Theory Workshop" (May 13-15, 2016) that the Australian Association for Educational Research facilitated with Griffith University in Brisbane.…

  4. Use of cyclotrons in medical research: Past, present, future

    Science.gov (United States)

    Smathers, James B.; Myers, Lee T.

    1985-05-01

    The use of cyclotrons in medical research started in the late 1930s with the most prominent use being neutron irradiation in cancer therapy. Due to a lack of understanding of the biological effect of neutrons, the results were less than encouraging. In the 1940s and 1950s, small cyclotrons were used for isotope production and in the mid 60s, the biological effect of neutrons was more thoroughly studied, with the result that a second trial of neutron therapy was initiated at Hammersmith Hospital, England. Concurrent with this, work on the use of high energy charged particles, initially protons and alphas, was initiated in Sweden and Russia and at Harvard and Berkeley. The English success in neutron therapy led to some pilot studies in the USA using physics cyclotrons of various energies and targets. These results in turn lead to the present series of machines presently being installed at M.D. Anderson Hospital (42 MeV), Seattle (50 MeV) and UCLA (46 MeV). The future probably bodes well for cyclotrons at the two extremes of the energy range. For nuclear medicine the shift is away from the use of multiple isotopes, which requires a large range of particles and energies to 11C, 13N, 15O, and 18F, which can be incorporated in metabolic specific compounds and be made with small 8-10 MeV p+ "table top" cyclotrons. For tumor therapy machines of 60 MeV or so will probably be the choice for the future, as they allow the treatment of deep seated tumors with neutrons and the charged particles have sufficient range to allow the treatment of ocular tumors.

  5. Presentations

    International Nuclear Information System (INIS)

    2007-01-01

    The aim of the Exploratory Workshop is to encourage informal discussion and the exchange of expertise between scientists using random matrix theory in various areas of research ranging from fundamental physics: string theory, gravity, quantum chaos, information theory, complexity theory, combinatorics to applied research: biophysics, econophysics, quantitative finance and telecommunication. Such a discussion would be a first step towards creating a common European environment for researchers using this powerful theory

  6. Present status of intermediate band solar cell research

    International Nuclear Information System (INIS)

    Cuadra, L.; Marti, A.; Luque, A.

    2004-01-01

    The intermediate band solar cell is a theoretical concept with the potential for exceeding the performance of conventional single-gap solar cells. This novel photovoltaic converter bases its superior theoretical efficiency over single-gap solar cells by enhancing its photogenerated current, via the two-step absorption of sub-band gap photons, without reducing its output voltage. This is achieved through a material with an electrically isolated and partially filled intermediate band located within a higher forbidden gap. This material is commonly named intermediate band material. This paper centres on summarising the present status of intermediate band solar cell research. A number of attempts, which aim to implement the intermediate band concept, are being followed: the direct engineering of the intermediate band material, its implementation by means of quantum dots and the highly porous material approach. Among other sub-band gap absorbing proposals, there is a renewed interest on the impurity photovoltaic effect, the quantum well solar cells and the particularly promising proposal for the use of up- and down-converters

  7. Present status of nuclear fusion research and development

    International Nuclear Information System (INIS)

    Discussions are included on the following topics: (1) plasma confinement theoretical research, (2) torus plasma research, (3) plasma measurement research, (4) technical development of equipment, (5) plasma heating, (6) vacuum wall surface phenomena, (7) critical plasma test equipment design, (8) noncircular cross-sectional torus test equipment design, (9) nuclear fusion reactor design, (10) nuclear fusion reactor engineering, (11) summary of nuclear fusion research in foreign countries, and (12) long range plan in Japan

  8. PEOPLE - The cutting edge in power generation

    International Nuclear Information System (INIS)

    Boswell, M.J.; Hankal, S.

    1995-01-01

    As competition for the United States power consumer increases, generating companies must seek new ways to do business. One way to keep up with the pace of change is to implement unique ideas into various areas of daily operation at the generating station. From subtle new management styles to ambitious employee education programs, changes in operating the management techniques can produce valuable results over time. An educated confident workforce is capable of vast improvement in efficiency and technical competence. We become empowered

  9. The cutting edge of aplastic anemia treatment.

    Science.gov (United States)

    Obara, Naoshi

    2017-01-01

    Aplastic anemia is a syndrome in which hematopoietic stem cells are decreased and bone marrow hypoplasia and pancytopenia are observed; it is considered as a T cell-mediated autoimmune disease. Recently, it has been reported that gene mutations suggestive of clonal hematopoiesis are detected in approximately one third of the patients with aplastic anemia. Among treatment approaches other than hematopoietic stem cell transplantation, immunosuppressive therapy with antithymocyte globulin (ATG) plus cyclosporin is a basic approach, although it has been shown that eltrombopag, a thrombopoietin receptor agonist, is effective and that the recovery of hematopoiesis in three blood lineage is observed in some patients. Studies on the optimum dose of ATG are in progress. Regarding hematopoietic stem cell transplantation for aplastic anemia, regimens are being designed in which cyclophosphamide as a pretreatment is reduced and fludarabine is instead used in combination for the reduction of cardiotoxicity. Because HLA haploidentical transplantation has been developed and its reports are increasing for patients who cannot find appropriate donors, transplantation may be possible in patients who had previously given up on it.

  10. Nutrigenomics: the cutting edge and Asian perspectives.

    Science.gov (United States)

    Kato, Hisanori

    2008-01-01

    One of the two major goals of nutrigenomics is to make full use of genomic information to reveal how genetic variations affect nutrients and other food factors and thereby realize tailor-made nutrition (nutrigenetics). The other major goal of nutrigenomics is to comprehensively understand the response of the body to diets and food factors through various 'omics' technologies such as transcriptomics, proteomics, and metabolomics. The most successfully exploited technology to date is transcriptome analysis, due mainly to its efficiency and high-throughput feature. This technology has already provided a substantial amount of data on, for instance, the novel function of food factors, the unknown mechanism of the effect of nutrients, and even safety issues of foods. The nutrigenomics database that we have created now holds the publication data of several hundred of such 'omics' studies. Furthermore, the transcriptomics approach is being applied to food safety issues. For ex-ample, the data we have obtained thus far suggest that this new technology will facilitate the safety evaluation of newly developed foods and will help clarify the mechanism of toxic effects resulting from the excessive intake of a nutrient. The 'omics' data accumulated by our group and others strongly support the promise of the systems biology approach to food and nutrition science.

  11. The Cutting Edge of Affinity Electrophoresis Technology

    Science.gov (United States)

    Kinoshita, Eiji; Kinoshita-Kikuta, Emiko; Koike, Tohru

    2015-01-01

    Affinity electrophoresis is an important technique that is widely used to separate and analyze biomolecules in the fields of biology and medicine. Both quantitative and qualitative information can be gained through affinity electrophoresis. Affinity electrophoresis can be applied through a variety of strategies, such as mobility shift electrophoresis, charge shift electrophoresis or capillary affinity electrophoresis. These strategies are based on changes in the electrophoretic patterns of biological macromolecules that result from interactions or complex-formation processes that induce changes in the size or total charge of the molecules. Nucleic acid fragments can be characterized through their affinity to other molecules, for example transcriptional factor proteins. Hydrophobic membrane proteins can be identified by means of a shift in the mobility induced by a charged detergent. The various strategies have also been used in the estimation of association/disassociation constants. Some of these strategies have similarities to affinity chromatography, in that they use a probe or ligand immobilized on a supported matrix for electrophoresis. Such methods have recently contributed to profiling of major posttranslational modifications of proteins, such as glycosylation or phosphorylation. Here, we describe advances in analytical techniques involving affinity electrophoresis that have appeared during the last five years. PMID:28248262

  12. The Cutting Edge of Affinity Electrophoresis Technology.

    Science.gov (United States)

    Kinoshita, Eiji; Kinoshita-Kikuta, Emiko; Koike, Tohru

    2015-03-18

    Affinity electrophoresis is an important technique that is widely used to separate and analyze biomolecules in the fields of biology and medicine. Both quantitative and qualitative information can be gained through affinity electrophoresis. Affinity electrophoresis can be applied through a variety of strategies, such as mobility shift electrophoresis, charge shift electrophoresis or capillary affinity electrophoresis. These strategies are based on changes in the electrophoretic patterns of biological macromolecules that result from interactions or complex-formation processes that induce changes in the size or total charge of the molecules. Nucleic acid fragments can be characterized through their affinity to other molecules, for example transcriptional factor proteins. Hydrophobic membrane proteins can be identified by means of a shift in the mobility induced by a charged detergent. The various strategies have also been used in the estimation of association/disassociation constants. Some of these strategies have similarities to affinity chromatography, in that they use a probe or ligand immobilized on a supported matrix for electrophoresis. Such methods have recently contributed to profiling of major posttranslational modifications of proteins, such as glycosylation or phosphorylation. Here, we describe advances in analytical techniques involving affinity electrophoresis that have appeared during the last five years.

  13. Cutting-edge issues in autoimmune orchitis.

    Science.gov (United States)

    Silva, Clovis A; Cocuzza, Marcello; Borba, Eduardo F; Bonfá, Eloísa

    2012-04-01

    Autoimmune orchitis is a relevant cause of decreased fecundity in males, and it is defined as a direct aggression to the testis with the concomitant presence of anti-sperm antibodies (ASA). The presence of these specific antibodies has been observed in approximately 5-12% of infertile male partners. Primary autoimmune orchitis is defined by isolated infertility with ASA but without evidence of a systemic disease. Secondary causes of orchitis and/or testicular vasculitis are uniformly associated with autoimmune diseases, mainly in primary vasculitis such as polyarteritis nodosa, Behçet's disease, and Henoch-Schönlein purpura. The overall frequencies of acute orchitis and ASA in rheumatic diseases are 2-31% and 0-50%, respectively. The pathogenesis of primary/secondary autoimmune orchitis is not completely understood but probably involves the access of immune cells to the testicular microenvironment due to inflammation, infection or trauma, leading to apoptosis of spermatocytes and spermatids. Glucocorticoids and immunosuppressive drugs are indicated in autoimmune orchitis-associated active systemic autoimmune diseases. However, there are no standardized treatment options, and the real significance of ASA in infertile men is still controversial. Assisted reproductive technologies such as intrauterine insemination, in vitro fertilization, and intracytoplasmic sperm injection (ICSI) are therapeutic options for male infertility associated with these autoantibodies. ICSI is considered to be the best choice for patients with severe sperm autoimmunity, particularly in males with low semen counts or motility.

  14. Art-inspired Presentation of Earth Science Research

    Science.gov (United States)

    Bugbee, K.; Smith, D. K.; Smith, T.; Conover, H.; Robinson, E.

    2016-12-01

    This presentation features two posters inspired by modern and contemporary art that showcase different Earth science data at NASA's Global Hydrology Resource Center Distributed Active Archive Center (GHRC DAAC). The posters are intended for the science-interested public. They are designed to tell an interesting story and to stimulate interest in the science behind the art. "Water makes the World" is a photo mosaic of cloud water droplet and ice crystal images combined to depict the Earth in space. The individual images were captured using microphysical probes installed on research aircraft flown in the Mid-latitude Continental Convective Clouds Experiment (MC3E). MC3E was one of a series of ground validation field experiments for NASA's Global Precipitation Measurement (GPM) mission which collected ground and airborne precipitation datasets supporting the physical validation of satellite-based precipitation retrieval algorithms. "The Lightning Capital of the World" is laid out on a grid of black lines and primary colors in the style of Piet Mondrian. This neoplastic or "new plastic art" style was founded in the Netherlands and was used in art from 1917 to 1931. The poster colorfully describes the Catatumbo lightning phenomenon from a scientific, social and historical perspective. It is a still representation of a moving art project. To see this poster in action, visit the GHRC YouTube channel at http://tinyurl.com/hd6crx8 or stop by during the poster session. Both posters were created for a special Research as Art session at the 2016 Federation of Earth Science Information Partners (ESIP) summer meeting in Durham, NC. This gallery-style event challenged attendees to use visual media to show how the ESIP community uses data. Both of these visually appealing posters draw the viewer in and then provide information on the science data used, as well as links for more information available. The GHRC DAAC is a joint venture of NASA's Marshall Space Flight Center and the

  15. Present status of research reactor and future prospects

    International Nuclear Information System (INIS)

    Nakajima, Ken

    2013-01-01

    Research reactors have been playing an important role in the research and development of the various fields, such as physics, chemistry, biology, engineering, agriculture, medicine, etc. as well as human resource development. However, the most of them are older than 40 years, and the ageing management is an important issue. In Japan, only two research reactors are operational after the Great East Japan Earthquake in 2011. JAEA's reactors suffered from the quake and they are under inspections. Kyoto University Research Reactor, one of the operational reactors, has been widely used for research and human resource development, and the additional safety measures against the station blackout were installed. Besides the affect of the quake, the disposal or treatment of spent fuel becomes an inevitable problem for research reactors. The way of spent fuel disposal or treatment should be determined with the nation-wide and/or international coalition. (author)

  16. Presentation

    Directory of Open Access Journals (Sweden)

    Eduardo Vicente

    2013-06-01

    effectivities more than a number of fixed essential characteristics. Luiz Artur Ferrareto (UFRGS, undertaking a theoretical proposal for categorizing radio content in four different levels of planning (segment, form, programming and content itself tries to “compare and contrast the practices of Brazilian commercial broadcasting companies to those used on the radio in the United States, a reference market for our national entrepreneurs”. Madalena Oliveira (University of Minho focuses on the current stage of communication researches in Portugal reflecting on the challenges for studying a culture based on listening in times of looking. Marko Ala-Fossi, (University of Tampere beginning with the statement that “radio evolution greatly depends not only on the cultural context of a country but also on the whole social, political, economic development of societies” gives us a projection on radio development around the world for the next decades. Closing the dossier, Rafael Duarte Oliveira Venancio (UFU assuming radio as language by definition and not as a device understands it as a section and an operating model in such language as it intersects the world. Another six articles, not enrolled in the dossier, round the edition off. Fernando de Tacca debates the category of “photocine” recurring to three recent Spanish productions. Gustavo Souza investigates the possibility of identifying a point of view in documentary movies while establishing a debate that joins the materialities of image and sound with the subjectivity resulting from interpretation. Vinicius Bandeira develops on the special duplicity present in the movies between what is and what is not subsumed by the camera. Neide Jallageas proposes the study of visual communication design from the first modelings, attempting especially to the radical propositions from the early XXth century avant-garde movement. Gilson Schwartz debates on the impact from the distribution of videogames as hegemonic cultural practice in

  17. Beyond Synthesis: Re-Presenting Heterogeneous Research Literature

    Science.gov (United States)

    Sylvester, Allan; Tate, Mary; Johnstone, David

    2013-01-01

    This article examines the nature, role and function of the literature review in academic discourse. Researchers in information systems (IS) are often advised to espouse a neutral viewpoint and adapt the goal of synthesising previous literature when conducting a literature review. However, since research literature in many areas of IS is diverse…

  18. The present status and the prospect of China research reactors

    International Nuclear Information System (INIS)

    Yongmao, Z.; Yizheng, C.

    1990-01-01

    A total of 100 reactor operation years' experience of research reactors has now been obtained in China. The type and principal parameters of China research reactors and their operating status are briefly introduced in this paper. Chinese research reactors have been playing an important role in nuclear power and nuclear weapon development, industrial and agricultural production, medicine, basic and applied science research and environmental protection, etc. The utilization scale, benefits and achievements will be given. There is a good safety record in the operation of these reactors. A general safety review is discussed. The important incidents and accidents happening during a hundred reactor operating years are described and analyzed. China has the capability of developing any type of research reactor. The prospective projects are briefly introduced

  19. Present state and future planning on research cooperation

    International Nuclear Information System (INIS)

    Maeda, Atsushi

    1997-01-01

    NUCEF is a comprehensive large scale research facility to conduct from critical safety study to study on nuclear fuel cycle back end, and aims to be a kerneled research place by intending its effective application through common application due to colaboration and others. Therefore, NUCEF hopes to promote active research cooperation with various research institutes in or out of Japan and wide development. NUCEF held the 1st International Symposium NUCEF'95 in 1995, to discuss the engineering safety of nuclear fuel recycle facility. Subsequently, NUCEF'98 will hold next year, to intend to promote studies relating to nuclear fuel recycle from an international view. And also, it will intend to promote positively cooperation in response to needs with relating institutes, and private companies as well as to expect some innovative studies to create new techniques through colaboration with universities. (G.K.)

  20. 1st International Early Research Career Enhancement School

    CERN Document Server

    Klimov, Valentin; Rybina, Galina

    2016-01-01

    This book presents cutting-edge research focused on current challenges towards the realization of Biologically Inspired intelligent agents, or Cognitive Architectures (BICA). The chapters are written by both world-recognized experts (including Antonio Chella, Olivier Georgeon, Oliver Kutz, Antonio Lieto, David Vernon, Paul Verschure, and others) and young researchers. Together, they constitute a good mixture of new findings with tutorial-based reviews and position papers, all presented at the First International Early Research Career Enhancement School on Biologically Inspired Cognitive Architectures (FIERCES on BICA 2016), held April 21-24 in Moscow, Russia. Most works included here cross boundaries between disciplines: from neuroscience to social science, from cognitive science to robotics, and from bioengineering to artificial intelligence. A special emphasis is given to novel solutions to urgent problems that have been resisting traditional approaches for decades. Intended for providing readers with an up...

  1. Building research capacity to inform practical policymaking | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-08-17

    Aug 17, 2017 ... IDRC is committed to supporting cutting-edge research led by developing country experts to create lasting change. Building strong partnerships with regional researchers and organizations through research support and capacity building is integral to the success of this approach. The African Economic ...

  2. Aluminium toxicity tolerance in crop plants: Present status of research

    African Journals Online (AJOL)

    ... tolerance of which genes of the Aluminium-activated malate transporter (ALMT) and multidrug and toxic compound extrusion (MATE) families are prominent. In this review, the progress of research in identifying aluminium toxicity tolerant genes is discussed. Keywords: Aluminium toxicity, soil acidity, hydroponic screening, ...

  3. Computers in Language Testing: Present Research and Some Future Directions.

    Science.gov (United States)

    Brown, James Dean

    1997-01-01

    Explores recent developments in the use of computers in language testing in four areas: (1) item banking; (2) computer-assisted language testing; (3) computerized-adaptive language testing; and (4) research on the effectiveness of computers in language testing. Examines educational measurement literature in an attempt to forecast the directions…

  4. Present status of HTGR research and development, 1995

    International Nuclear Information System (INIS)

    1996-02-01

    Based on the Long-term Program for Development and Utilization of Nuclear Energy which was revised in 1987, the Japan Atomic Energy Research Institute (JAERI) has carried out the Research and Development (R and D) on the High Temperature Gas-cooled Reactors (HTGRs) in Japan. The JAERI obtained the installation permit of the High Temperature Engineering Test Reactor (HTTR) from the Government in November 1990 and started the construction of the HTTR facility in the Oarai Research Establishment in March 1991. The HTTR is a test reactor with thermal output of 30MW and outlet coolant temperature of 850degC at the rated operation and 950degC at the high temperature test operation, using the pin-in-block type fuel, and has capability to demonstrate nuclear process heat utilization. The reactor pressure vessel and intermediate heat exchanger were installed in the reactor containment vessel in 1994, and reactor internals were also installed in the reactor pressure vessel in 1995. The first criticality will be attained in December 1997. This report describes the design outline and construction progress of the HTTR, R and D of fuel, materials and components for the HTGR and high temperature nuclear heat application, and innovative and basic researches for high temperature technologies at the HTTR. (J.P.N.)

  5. Use and development of teaching technologies presented in nursing research

    Directory of Open Access Journals (Sweden)

    Pétala Tuani Candido de Oliveira Salvador

    2015-07-01

    Full Text Available Objective: characterizing teaching technologies used or developed in nursing dissertations and theses in Brazil. Methods: a documentary research that had data collection sourced from directories of theses and dissertations available on the website of the Brazilian Nursing Association, from Volumes Nineteen (XIX (2001 to Twenty-one (XXI (2013. Results: of 6346 studies, 18 (0.28% used or developed teaching technologies, composed of the following categories: use of conceptual map; use of games; development of Virtual Learning Environment; development of educational materials; development of Distance Education courses; and artifact development. Conclusion: national research on the development and use of teaching technology in nursing are still insufficient, especially in the North and Northeast. Multiple benefits of the use of teaching technologies in nursing and learning environments were highlighted, not only for students and professionals, but also for patients.

  6. Present status of high temperature engineering test and research, 1994

    International Nuclear Information System (INIS)

    1994-10-01

    High temperature gas-cooled reactors have excellent features such as the generation of high temperature close to 1000degC, very high inherent safety and high fuel burnup. By the advanced basic research under high temperature irradiation condition, the creation of various new technologies which become the momentum of future technical innovation can be expected. The construction of the high temperature engineering test reactor (HTTR) was decided in 1987, which aims at the thermal output of 30 MW and the coolant temperature at reactor exit of 950degC. The initial criticality is scheduled in 1998. Japan Atomic Energy Research Institute has advanced the high temperature engineering test and research, and plans the safety verifying test of the HTTR, the test of connecting heat utilization plants and so on. In this report, mainly the results obtained for one year from May, 1993 are summarized. The outline of the high temperature engineering test and development of the HTTR technologies are reported. (K.I.)

  7. Studies in Teaching 1999 Research Digest. Research Projects Presented at Annual Research Forum (Winston-Salem, North Carolina, December 1999).

    Science.gov (United States)

    McCoy, Leah P., Ed.

    This publication presents a collection of research projects presented at the Annual Research Forum at Wake Forest University: "The Use of Group Work as an Effective Teaching Technique in Lower Level Spanish Classes" (James Blackburn); "What Are the Real Factors behind Student Motivation?" (Matthew Grey Burdick); "Can…

  8. Present status of the Riken accelerator research facility (RARF)

    International Nuclear Information System (INIS)

    Kase, M.; Goto, A.; Kageyama, T.; Yokoyama, I.; Nagase, M.; Kohara, S.; Nakagawa, T.; Inabe, N.; Ikegami, K.; Kamigaito, O.; Kidera, M.; Fujita, J.; Yoneda, A.; Kobayashi, M.; Yano, Y.

    1999-01-01

    The K540-MeV RIKEN Ring Cyclotron (RRC) celebrated 10 years of successful beam operation in December 1996. The beam intensities have been increased over years to the present levels of about 500 pnA for 135 MeV/nucleon 12 C and of 2000 pnA for 24 MeV/nucleon 40 Ar. The variation of beam has now exceeded one hundred. These beams have been delivered to users in many fields. Improvements are being and will be made to upgrade the present machine to be matched as an injector to the program of the RI beam factory. (authors)

  9. Past, Present, and Future Research Avenues for Metformin

    Science.gov (United States)

    Sparkes, Steven T.; Patel, Dhiren K.

    2014-01-01

    Objective: To review why metformin is considered first-line therapy for type 2 diabetes mellitus (T2DM) and review newer avenues of research currently being evaluated. Data Sources: The Cochrane Library and Medline (to January 2014) were searched for case–control and cohort studies, clinical trials, and systematic reviews and meta-analyses involving metformin for any indication. Study Selection and Data Extraction: The literature search found 5 major avenues of research for metformin: reduction in mortality, delayed-onset or prevention of T2DM in the presence of prediabetes, nonalcoholic fatty liver disease (NAFLD), polycystic ovarian syndrome (PCOS), and decreased cancer risk. When available, multi-center, double-blind, controlled clinical trials or meta-analyses thereof were selected for review. If these types of studies did not exist, other types of studies were chosen for review. Data Synthesis: Metformin significantly decreases all-cause and diabetes-related mortality in overweight and obese patients with T2DM. It may also decrease risk of progression to T2DM in patients with prediabetes. Metformin has been studied for the treatment of NAFLD though data are limited. Metformin alone or combined with clomiphene may increase pregnancy and ovulation rates but has not yet been shown to increase live-birth rates in patients with PCOS. Metformin may decrease risk of colorectal cancer but not all-cancer risk. Conclusions: Metformin’s clinical role in T2DM and prediabetes is well established. Other avenues of research being evaluated at this time are NAFLD, PCOS, and reduced risk of cancer; more data are needed before it has a clinical role in these indications.

  10. Neutron scattering research at JAERI reactors - past, present and future -

    International Nuclear Information System (INIS)

    Funahashi, Satoru; Morii, Yukio; Minakawa, Nobuaki

    1992-01-01

    It was in 1961 that the first neutron scattering experiment was performed in Japan at JRR-2. The start of JRR-3 in 1964 accelerated the neutron scattering activities in Japan. The research in this field in Japan grew up by using these two research reactors. Among them JRR-2 has played an important role because its neutron flux was about seven times higher than that of the old JRR-3. The completion of the new JRR-3M in 1990 made an epoch to the neutron scattering activities in Japan. The long-waited JRR-3M came up to the expectations of the scientists of Japan. It is a realization of the ideal reactor with tangential beam holes, cold source and neutron guides in a large guide hall. The flux at the neutron scattering instruments is about five times higher than that of JRR-2. Utilization of JRR-3M has just started. Twelve neutron scattering machines are running there. The number will increase up to close twenty in a couple of years. (author)

  11. Present state of research and development of MHD power generation

    International Nuclear Information System (INIS)

    Ikeda, Shigeru

    1978-01-01

    MHD power generation can obtain electric energy directly from the heat energy of high speed plasma flow, and the power generating plant of 1 million kW can be realized by this method. When the MHD power generation method is combined before conventional thermal power generation method, the thermal efficiency can be raised to about 60% as compared with 38% in thermal power generation plants. The research and development of MHD power generation are in progress in USA and USSR. The research and development in Japan are in the second stage now after the first stage project for 10 years, and the Mark 7 generator with 100 kW electric output for 200 hr continuous operation is under construction. The MHD power generation is divided into three types according to the conductive fluids used, namely combustion type for thermal power generation, unequilibrated type and liquid metal type for nuclear power generation. The principle of MHD power generation and the constitution of the plant are explained. In Japan, the Mark 2 generator generated 1,180 kW for 1 min in 1971, and the Mark 3 generator generated 1.9 kW continuously for 110 hr in 1967. The MHD generator with superconducting magnet succeeded in 1969 to generate 25 kW for 6 min. The second stage project aimes at collecting design data and obtaining operational experience for the construction of 10 MW class pilot plant, and the Mark 7 and 8 generators are planned. (Kako, I.)

  12. Implementation of proteomics for cancer research: past, present, and future.

    Science.gov (United States)

    Karimi, Parisa; Shahrokni, Armin; Ranjbar, Mohammad R Nezami

    2014-01-01

    Cancer is the leading cause of the death, accounts for about 13% of all annual deaths worldwide. Many different fields of science are collaborating together studying cancer to improve our knowledge of this lethal disease, and find better solutions for diagnosis and treatment. Proteomics is one of the most recent and rapidly growing areas in molecular biology that helps understanding cancer from an omics data analysis point of view. The human proteome project was officially initiated in 2008. Proteomics enables the scientists to interrogate a variety of biospecimens for their protein contents and measure the concentrations of these proteins. Current necessary equipment and technologies for cancer proteomics are mass spectrometry, protein microarrays, nanotechnology and bioinformatics. In this paper, we provide a brief review on proteomics and its application in cancer research. After a brief introduction including its definition, we summarize the history of major previous work conducted by researchers, followed by an overview on the role of proteomics in cancer studies. We also provide a list of different utilities in cancer proteomics and investigate their advantages and shortcomings from theoretical and practical angles. Finally, we explore some of the main challenges and conclude the paper with future directions in this field.

  13. Past, present, and future in hippocampal formation and memory research.

    Science.gov (United States)

    Muñoz-López, Mónica

    2015-06-01

    Over 100 years of research on the hippocampal formation has led us understand the consequences of lesions in humans, the functional networks, anatomical pathways, neuronal types and their local circuitry, receptors, molecules, intracellular cascades, and some of the physiological mechanisms underlying long-term spatial and episodic memory. In addition, complex computational models allow us to formulate sophisticated hypotheses; many of them testable with techniques recently developed unthinkable in the past. Although the neurobiology of the cognitive map is starting to be revealed today, we still face a future with many unresolved questions. The aim of this commentary is twofold. First is to point out some of the critical findings in hippocampal formation research and new challenges. Second, to briefly summarize what the anatomy of memory can tell us about how highly processed sensory information from distant cortical areas communicate with different subareas of the entorhinal cortex, dentate gyrus, and hippocampal subfields to integrate and consolidate unique episodic memory traces. © 2015 Wiley Periodicals, Inc.

  14. Micronutrient problems in Thailand - extent, past and present research

    International Nuclear Information System (INIS)

    Snitwongse, P.

    1975-01-01

    Micronutrient problems in Thailand are briefly discussed, particularly with reference to rice. At present, the relative amounts of zinc in rice-growing areas (soils) are being analyzed for total and available zinc. Fertilizer (N, P, K) uptake by rice is being studied in the field by means of zinc-65. Observations on the relative uptake of P by rice associated with different zinc levels are made on pot cultures, using phosphorus-32

  15. Plant root research: the past, the present and the future

    OpenAIRE

    Lux, Alexander; Rost, Thomas L.

    2012-01-01

    This special issue is dedicated to root biologists past and present who have been exploring all aspects of root structure and function with an extensive publication record going over 100 years. The content of the Special Issue on Root Biology covers a wide scale of contributions, spanning interactions of roots with microorganisms in the rhizosphere, the anatomy of root cells and tissues, the subcellular components of root cells, and aspects of metal accumulation and stresses on root function ...

  16. Scientific research in school psychology: Leading researchers weigh in on its past, present, and future.

    Science.gov (United States)

    McIntosh, Kent; Martinez, Rebecca S; Ty, Sophie V; McClain, Maryellen B

    2013-06-01

    A survey of established researchers in school psychology was conducted to reflect on the state of the science of school psychology research. A total of 54 members of the Society for the Study of School Psychology shared their perceptions of (a) the most significant findings of the past 25years that have influenced research and practice in school psychology, (b) current, exciting research topics, and (c) topics that are likely to guide the future of research in school psychology. Qualitative analyses revealed 6 major categories and 17 minor categories within the major categories. Four major categories were present across each of the three time periods: (a) Data-Informed Practices and their Implementation, (b) Theory Development, (c) Changing Role and Function, and (d) Biological Bases of Behavior. Additional major categories included Advances in Research Methodology and Psychometrics (found across past and present time periods) and There is Not One Single Most Important Idea (found during only the past time period). Quotations are provided to illustrate these categories and share the respondents' ideas in their own words. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

  17. Present status of research and development for HTR in China

    Energy Technology Data Exchange (ETDEWEB)

    Dazhong, Wang; Daxin, Zhong; Yuanhul, Xu [Institute of Nuclear Energy Technology, Tsinghua University, Beijing (China)

    1990-07-01

    The HTR R and D Project is being carried out in the relevant institutions in China. Some topics are covered such as, fuel element technology, graphite development, fuel element handling system, helium technology, fuel reprocessing technology as well as HTR design study. Some results of HTR research work are described. In addition, to provide a test facility for investigation of HTR Module reactor safety and process heat application of HTR, a joint project on building a 10 MW test HTR with Siemens-Interatom, KFA Juelich and INET is going on. The conceptual design of 10 MW test HTR has been completed by the joint group. In parallel the application study of HTR Module is being carried out for the oil industry, petrochemical industry as well as power generation. Some preliminary results of the application study, for example, for heavy oil recovery on Shengli oil field and process heat application in Yan shan petroleum company, are described. (author)

  18. Present status of decommissioning materials reuse research at JAERI

    International Nuclear Information System (INIS)

    Fujiki, Kazuo; Nakamura, Hisashi; Kanazawa, Katsuo

    1991-01-01

    Rational treatment and disposal of a large volume of the dismantling wastes resulting from the reactor dismantling are the key to success to carry out the decommissioning smoothly. From this viewpoint, the Japan Atomic Energy Research Institute (JAERI) has been conducting development of the recycling technology for metal waste and a investigation study on the rational recycling system for the dismantling wastes recycling. With respect to the development of the recycling technology, melting tests using non-contaminated metals have been conducted and the basic characteristics of experimental facility and material balances understood. In the investigation study on the rational recycling system, review and discussion were made on the amount of waste arising from decommissioning a nuclear power plant, a scenario of recycling the wastes, and the necessary processing facilities. (author)

  19. Space Weather Research Presented at the 2007 AGU Fall Meeting

    Science.gov (United States)

    Kumar, Mohi

    2007-12-01

    AGU's 47th annual Fall Meeting, held 10-14 December 2007 in San Francisco, Calif., was the largest gathering of geoscientists in the Union's history. More than 14,600 people attended. The Space Physics and Aeronomy (SPA) sections sported excellent turnout, with more than 1300 abstracts submitted over 114 poster and oral sessions. Topics discussed that related to space weather were manifold: the nature of the Sun-Earth system revealed through newly launched satellites, observations and models of ionospheric convection, advances in the understanding of radiation belt physics, Sun-Earth coupling via energetic coupling, data management and archiving into virtual observatories, and the applications of all this research to space weather forecasting and prediction.

  20. Present status of chemical research progress on ceramics, 1

    International Nuclear Information System (INIS)

    Hirooka, Yoshihiko; Imai, Hisashi

    1982-07-01

    Among silicon-based ceramics, silicon nitride and silicon carbide have generated considerable interest in recent years as potential materials for many high temperature engineering applications. Particularly in their dense high-strength forms, these materials are being proposed for use as structural materials, for instance, in HTGRs and in CTRs. Their potential usefulness and the maximum use temperature absolutely depend upon their chemical characteristics such as thermal stability and chemical reactivity against high temperature environment. There still remains, however, much room to investigate in chemistry of ceramics both in technological and academic aspects. From this point of view some chemical works mainly on silicon nitride, silicon carbide and supplementarily on their common oxide, silicon dioxide, are systematically reviewed and a prospect of the direction to which future research on these ceramics shall proceed is implied in this document. (author)

  1. Migration: The Present State, Problems and Perspectives of Research Paradigms

    Directory of Open Access Journals (Sweden)

    Silva Mežnarić

    2003-12-01

    Full Text Available Two prevailing paradigms in contemporary international migration research – migration as unpredictable explosion and migration as mainly predictable long cycles movement – are put into question. Both paradigms are not valid in explaining latest development in international migration field. They are too robust for reality which is satiated with novel developments in the field of volume, directions, labour markets and structure of migration flows, both voluntary and involuntary. Individual independent migrant as decision maker is coming to the fore. Therefore the reassessment of theoretical and conceptual apparatus of migration is imminent. As to the methods, mathematically supported sociological models of contemporary migration could be needed. On the basis of “new intuition”, the principles of simplicity, parsimony, and universality could lead to a theoretical innovation.

  2. Researching Disturbed, Disturbing Art: Using Typography to Re/Present Educational Research

    Science.gov (United States)

    Loveless, Douglas J.; Bhattacharya, Kakali; Griffith, Bryant

    2012-01-01

    This paper argues that typography can be an affective re/presentational strategy when used as a medium within the research framework of arts-based inquiry. Grounded in a larger comparative case study exploring the experiences of two elementary teachers in south Texas, the purpose of this paper is to (1) situate typography within the field of…

  3. Data presentation options to manage variability in physical activity research.

    Science.gov (United States)

    Valbuena, Diego; Miller, Bryon G; Samaha, Andrew L; Miltenberger, Raymond G

    2017-07-01

    This paper presents seven tactics for managing the variability evident in some physical activity data. High levels of variability in daily step-count data from pedometers or accelerometers can make typical visual inspection difficult. Therefore, the purpose of the current paper is to discuss several strategies that might facilitate the visual interpretation of highly variable data. The seven strategies discussed in this paper are phase mean and median lines, daily average per week, weekly cumulative, proportion of baseline, 7-day moving average, change point detection, and confidence intervals. We apply each strategy to a data set and discuss the advantages and disadvantages. © 2017 Society for the Experimental Analysis of Behavior.

  4. Lighting the way to the future: An anthology of improvements, developments, and research by NSLS staff and collaborators

    International Nuclear Information System (INIS)

    1996-01-01

    Following the commissioning phase of a scientific facility, it is essential to invent, adapt and improve new technologies so that the specification and performance of the facility is upgraded over it's lifetime. It is equally important that staff keep their expertise and research interests at the cutting edge and contribute, based on their unique experience, to the present and next generation of experiments at existing facilities and to the specification and R and D on which the next generation of facilities will be based. A synchrotron radiation facility such as the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory supports a very wide range of science which is dependent on the breadth of the electromagnetic spectrum which is generated. Scientists from many disciplines use radiation from the far infra-red (λ = 12 mm, Energy = 0.1 meV) through to extreme gamma rays (λ = 4 fm, Energy = 300 MeV). All aspects of the facility need continual improvement, development and research including the source itself, the optics of beamlines, experimental concepts and the performance of detectors. This collection of papers shows the scope of past work by NSLS staff and their collaborators, serves as a reminder of their achievements and as an indicator of the range, quality and quantity of work which is required to maintain a scientific user facility at the cutting edge

  5. Present state on research and development of underground disposal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    In September, 1996, Power Reactor and Nuclear Fuel Development Corp. (PNC) arranged her old research and development (R and D) results to issue as a shape of `Technical report on R and D of high level radioactive waste underground disposal`. On the other hand, Radioactive waste special party in Committee of Atomic Energy at that time evaluated that technical possibility for safety establishment of underground disposal in Japan was elucidated and showed future problems in the technical development. Therefore, PNC proceeded further R and D for the second arrangement under consideration of such comments. As a result, in investigation of geological environment condition, main points were laid at study on rear-field feature and its long-term stability. In development of disposal technique, main points were laid at elucidation of design requirements confirmable to the near-field evaluation, main points were laid at upgrading validity of evaluation model to analytically evaluate the near-field feature using data with high reliability. (G.K.)

  6. Nordic Nuclear Safety Research. Presentation of the 1994 - 1997 program

    International Nuclear Information System (INIS)

    Bennerstedt, Torkel

    1998-01-01

    NKS (Nordic Nuclear Safety Research) has just concluded its fifth 4-year program (1994 - 1997). The following nine projects were performed: Strategy for reactor safety: Studies of preparatory work to minimize the risk of accidents; Prevention of severe reactor accidents: studies of recriticality, core melt progression and support systems to minimize releases; Safe disposal of radioactive waste: Waste characterization, Performance analyses and environmental impact statements for repositories; Marine radioecology: Improved assessment methods for effects of releases of radionuclides; Long ecological half-lives in semi-natural systems: Models for transfer of cesium from nature to man; Preparedness strategies and procedures: Mobile measurements, quality assurance and interventions; Emergency preparedness drills and exercises; Preplanning of early cleanup: Check-list for planners and decision makers for various environments and fallout situations; Overriding information issues: Risk communication, real-time exchange of information after an accident. Together with additional financial support from a number of ministries and companies in the nuclear power field, the total NKS budget for the period 1994 - 1997 was some USD 5 million, evenly distributed over the years. To this should be added contributions in kind by participating organizations, worth at least another USD 10 million, without which this program would not have been possible. The nine projects and some practical results (rather than scientific detail) are outlined in this paper. (EG)

  7. Present status of neutron activation analysis in environmental research

    International Nuclear Information System (INIS)

    Steinnes, E.

    1984-01-01

    Neutron activation analysis, in spite of its many advantageous features, is less widely used than some alternative trace element techniques, and has been losing ground during the last decade. In the environmental field however there are still many problems which can be solved in a better way by the contribution of NAA. The combination of multi-element capability and high accuracy is of great importance in many studies related to atmospheric trace elements. Also in aquatic studies NAA still has a significant role to play. Applications to soils, sediments, and plant material have so far been limited, but there is a place for further development. The scope of NAA in environmental research may be extended by further use of pre-irradiation separations. NAA is particularly important in the certification of analytical reference materials in the environmental field. In future applications of NAA an appropriate combination with other analytical techniques will often be a requisite for success. The general future of NAA is dependent on the availability of nuclear reactors, radiochemical laboratoties and appropriate competence. 21 references

  8. Present state on research and development of underground disposal

    International Nuclear Information System (INIS)

    1996-12-01

    In September, 1996, Power Reactor and Nuclear Fuel Development Corp. (PNC) arranged her old research and development (R and D) results to issue as a shape of 'Technical report on R and D of high level radioactive waste underground disposal'. On the other hand, Radioactive waste special party in Committee of Atomic Energy at that time evaluated that technical possibility for safety establishment of underground disposal in Japan was elucidated and showed future problems in the technical development. Therefore, PNC proceeded further R and D for the second arrangement under consideration of such comments. As a result, in investigation of geological environment condition, main points were laid at study on rear-field feature and its long-term stability. In development of disposal technique, main points were laid at elucidation of design requirements confirmable to the near-field evaluation, main points were laid at upgrading validity of evaluation model to analytically evaluate the near-field feature using data with high reliability. (G.K.)

  9. Present status of fusion researches in USA, 4

    International Nuclear Information System (INIS)

    Yoshikawa, Shoichi; Okabayashi, Michio

    1983-01-01

    25 years have elapsed since nuclear fusion was published at the second Geneva conference in 1958. During this period, the Plasma Physics Laboratory of Princeton University has achieved the central role in the research on toroidal system nuclear fusion devices. Also the experiment of the large tokamak TFTR started from December, 1982, recorded the longest containment time of 200 ms as the initial data, and toroidal devices look to approach one step close to the scientific verification experiment (Q = 1) of reactors. In the PPPL, in order to perfect the basis required for the realization of nuclear fusion reactors, the experimental and theoretical developments have been carried out. Plasma containment experiment has been advanced successively from stellarater through internal conductor type to tokamak, and in plasma heating, ion cyclotron heating, fast neutral particle injection heating and low region hybrid heating were successfully carried out. As the experimental apparatuses, that for poloidal divertor experiment, Princeton large torus, tokamak fusion test reactor (TFTR) and S-1 spheromak are described. From the theories developed recently, bean type tokamak, heliac-stellarator and nuclear fusion reaction utilizing μ-mesons and nuclear spin are explained. (Kako, I.)

  10. Workshop on Energy Research for Physics Graduate Students and Postdocs

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Ken

    2015-03-01

    One-day workshop for a small group of graduate students and post-docs to hear talks and interact with experts in a variety of areas of energy research. The purpose is to provide an opportunity for young physicists to learn about cutting-edge research in which they might find a career utilizing their interest and background in physics.

  11. Research trends on Big Data in Marketing: A text mining and topic modeling based literature analysis

    Directory of Open Access Journals (Sweden)

    Alexandra Amado

    2018-01-01

    Full Text Available Given the research interest on Big Data in Marketing, we present a research literature analysis based on a text mining semi-automated approach with the goal of identifying the main trends in this domain. In particular, the analysis focuses on relevant terms and topics related with five dimensions: Big Data, Marketing, Geographic location of authors’ affiliation (countries and continents, Products, and Sectors. A total of 1560 articles published from 2010 to 2015 were scrutinized. The findings revealed that research is bipartite between technological and research domains, with Big Data publications not clearly aligning cutting edge techniques toward Marketing benefits. Also, few inter-continental co-authored publications were found. Moreover, findings show that research in Big Data applications to Marketing is still in an embryonic stage, thus making it essential to develop more direct efforts toward business for Big Data to thrive in the Marketing arena.

  12. Present status of research activities conducted by research group for heavy elements microbiology in JAERI

    International Nuclear Information System (INIS)

    Ohnuki, Toshihiko; Ozaki, Takuo; Yoshida, Takahiro

    2004-01-01

    It has been recognized that microbial transformations of radionuclides and toxic metals could be significant in the environment, but there is a paucity of information on the mechanisms of biotransformation of radionuclides by the microorganisms. An understanding at the fundamental level the mechanisms of mobilization, immobilization and bioavailability of radioactive elements in particular the actinides is important from the standpoint of mobility of actinides in the environment, disposal of radioactive wastes in deep geological formation, remediation of contaminated soils and materials, and development of strategies for the long-term stewardship of the contaminated sites. The microbiology research group in Japan Atomic Energy Research Institute (JAERI) is conducting basic scientific research on microbial interactions with actinides. Fundamental research on microbial transformations of actinides include elucidation of the mechanisms of dissolution and precipitation of various chemical forms such as ionic, oxides, organic and inorganic complexes of actinides by aerobic or anaerobic microorganisms under relevant microbial process conditions. State-of-the-art analytical techniques are used to determine the interaction of actinides with microorganisms at the molecular level to understand the structure function relationship. These techniques include time-resolved laser fluorescence spectroscopy (TRLFS) to determine the coordination number, oxidation states and the nearest neighbor by X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) at the Synchrotron Light Source, identification of functional groups by nuclear magnetic resonance (NMR), determination of chemical forms by transmission electron microscopy (TEM), and genomic (DNA) manipulation by molecular techniques. We here report the present status of our research activities on accumulation of lanthanides(III) by microorganisms, application of micro-particle induced X

  13. NCCR Chemical Biology: Interdisciplinary Research Excellence, Outreach, Education, and New Tools for Switzerland.

    Science.gov (United States)

    Sturzenegger, Susi; Johnsson, Kai; Riezman, Howard

    2011-01-01

    Funded by the Swiss National Science Foundation to promote cutting edge research as well as the advancement of young researchers and women, technology transfer, outreach and education, the NCCR (Swiss National Centre of Competence in Research) Chemical Biology is co-led by Howard Riezman, University of Geneva and Kai Johnsson, École Polytechnique Fédérale de Lausanne (EPFL).

  14. 2012 Gordon Research Conference on Cellular and Molecular Fungal Biology, Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Berman, Judith [Univ. of Minnesota, Minneapolis, MN (United States)

    2012-06-22

    The Gordon Research Conference on Cellular and Molecular Fungal Biology was held at Holderness School, Holderness New Hampshire, June 17 - 22, 2012. The 2012 Gordon Conference on Cellular and Molecular Fungal Biology (CMFB) will present the latest, cutting-edge research on the exciting and growing field of molecular and cellular aspects of fungal biology. Topics will range from yeast to filamentous fungi, from model systems to economically important organisms, and from saprophytes and commensals to pathogens of plants and animals. The CMFB conference will feature a wide range of topics including systems biology, cell biology and morphogenesis, organismal interactions, genome organisation and regulation, pathogenesis, energy metabolism, biomass production and population genomics. The Conference was well-attended with 136 participants. Gordon Research Conferences does not permit publication of meeting proceedings.

  15. Selected proceedings of the FP7 International Summer School Nanotechnology: From Fundamental Research to Innovations

    CERN Document Server

    Yatsenko, Leonid; Brodin, Mikhaylo; Nanomaterials imaging techniques, surface studies, and applications

    2013-01-01

    This book presents cutting-edge research on a wide range of nanotechnology techniques and applications.  It features contributions from scientists who participated in the International Summer School “Nanotechnology: From Fundamental Research to Innovations” in Bukovel, Ukraine on August 26 – September 2, 2012 funded by the European Commission FP7 project Nanotwinning implemented by the Institute of Physics of National Academy of Sciences of Ukraine and partner institutions: University of Tartu (Estonia), European Profiles A.E. (Greece), University of Turin (Italy) and Université Pierre et Marie Curie (France).  Worldwide experts present the latest results on such key topics as microscopy of nanostructures; nanocomposites; nanostructured interfaces and surfaces; nanooptics; nanoplasmonics; and enhanced vibrational spectroscopy.  Imaging technique coverage ranges from atomic force microscopy and spectroscopy, multiphoton imagery, and laser diagnostics of nanomaterials and nanostructures, to resonance ...

  16. U.S. Global Change Research Program National Climate Assessment Global Change Information System

    Science.gov (United States)

    Tilmes, Curt

    2012-01-01

    The program: a) Coordinates Federal research to better understand and prepare the nation for global change. b) Priori4zes and supports cutting edge scientific work in global change. c) Assesses the state of scientific knowledge and the Nation s readiness to respond to global change. d) Communicates research findings to inform, educate, and engage the global community.

  17. Research Activities of Geotechnical Research Group of NIIS from the Past to Present

    Science.gov (United States)

    Horii, N.; Toyosawa, Y.; Tamate, S.; Itoh, K.

    In this paper, firstly the memories of Prof. Tatsuoka's laboratory and research works carried out when the first author visited Prof. Tatsuoka's laboratory as a visiting researcher from May 1986 for about 1 year are described. Secondly, the research activities of Geotechnical Research Group of NIIS are introduced. Main emphasis is given on the research activities conducted using old geotechnical centrifuge (NIIS Mark-I centrifuge) and newly developed geotechnical centrifuge (NIIS Mark-II centrifuge).

  18. MCTP Summer Research Internship Program. Research Presentation Day: Experience Mathematics and Science in the Real World

    Science.gov (United States)

    1996-01-01

    This paper presents the summaries of the MCTP Summer Research Internship Program. Technological areas discussed include: Mathematical curriculum development for real world problems; Rain effects on air-water gas exchange; multi-ring impact basins on mars; developing an interactive multimedia educational cd-rom on remote sensing; a pilot of an activity for for the globe program; fossils in maryland; developing children's programming for the american horticultural society at river farm; children's learning, educational programs of the national park service; a study of climate and student satisfaction in two summer programs for disadvantaged students interested in careers in mathematics and science; the maryland governor's academy, integrating technology into the classroom; stream sampling with the maryland biological stream survey (MBSS); the imaging system inspection software technology, the preparation and detection of nominal and faulted steel ingots; event-based science, the development of real-world science units; correlation between anxiety and past experiences; environmental education through summer nature camp; enhancing learning opportunities at the Salisbury zoo; plant growth experiment, a module for the middle school classroom; the effects of proxisome proliferators in Japanese medaka embryos; development of a chapter on birth control and contraceptive methodologies as part of an interactive computer-based education module on hiv and aids; excretion of gentamicin in toadfish and goldfish; the renaissance summer program; and Are field trips important to the regional math science center?

  19. Introducing the USAYPT--Do Research in Your High School then Debate Your Results with Other Schools

    Science.gov (United States)

    Oldaker, Bruce G.; Jacobs, Greg; Bibilashvili, Tengiz

    2010-01-01

    We introduce the USAYPT--the United States Association for Young Physicists Tournaments, Inc. Our motto is "Better teaching and learning by doing research in your high school." We believe that all high school teachers can improve their knowledge of physics by forming small groups that perform non-trivial--but not cutting edge--research. In order…

  20. Moral Development Research Designed to Make a Difference: Some Gaps Waiting to be Filled.

    Science.gov (United States)

    Kuhmerker, Lisa

    1995-01-01

    Encapsulates five brief reports on cutting edge issues in moral education research. Discusses strengths and weaknesses of different administrative approaches to creating a character education program. Addresses the inherent dichotomy between military service and democratic values. Considers issues of data verification and abuse of power. (MJP)

  1. NEW MEDIA TECHNOLOGY DEVELOPMENT TO ENHANCE AND IMPROVE COMMUNICATIONS AT USEPA'S NATIONAL RISK MANAGEMENT RESEARCH LABORATORY

    Science.gov (United States)

    New media technology (NT) interactive applications are currently being developed in house at ORD/NRMRL to enhance and improve communication of NRMRL's 1) research projects, 2) workshops/conferences and 3) specialized training. NT is an exciting mix of cutting-edge information tec...

  2. Marine research in Greece and the additional Greek marine research centres: Progress and present situation

    Science.gov (United States)

    Haritonidis, S.

    1995-03-01

    Greece, as is known, has a coastline of 17 000 km, and over 2000 small and large islands. As expected, the quest of humankind for new sources of matter and energy has been focussed on the sea, with fishery being its primary interest. A number of philosophers and scientists have been involved in the study of this vast ecosystem since ancient times (Aristotle). The political, social and geographical upheavals witnessed in the Greek area, have, however resulted in bringing all these activities to a halt. The first contemporary research work commenced at the end of the 18th century/beginning of the 19th — with marine flora and fauna as its starting point. The first investigations had, of course, been limited to random collections of marine material done in the frame of international exploratory expeditions. Studies became more systematic by the end of the 19th and beginning of the 20th century, with priority being given to the animal kingdom (fish, molluscs, etc.). Investigation of the marine phytobenthos (macrophyceae, phytoplankton) was to follow. The past 40 years research has been more extensive, not limited only to biogeographical evaluations, but also having expanded to physiological and ecological levels. The relevant institutes of Greek universities have all the while watched and contributed to this effort. Today, this kind of research is being supported by the N.M.R.C., the Center of Marine Research, University of Crete, and two research boats which sail the Greek seas. In the ever-changing world, the study of marine flora and fauna has certainly made great progress; however, there are still two big problems to be faced. The first deals with increasing pollution of the seas, the second, with the difficulties in finding and affording adequate financial resources that would enable a more detailed and complete execution of this research work.

  3. A review of present research, research needs, and research capabilities related to the uranium mining and milling industry in Canada

    International Nuclear Information System (INIS)

    Woods, R.J.

    1981-01-01

    This report surveys the views of those associated with uranium mining in northern Saskatchewan on the research needs of the industry. Research resources, both human and material, available in the province are outlined. The author makes recommendations that would lead to a viable uranium research program. Appendices list information on current uranium-related research in Saskatchewan and available research resources

  4. Poster presented at Research Bazaar 2015 - project and digital tools overview

    OpenAIRE

    Strack, Michael

    2015-01-01

    Poster presented at the Research Bazaar 2015 at Melbourne University, Australia. Conference attendees were asked to share an overview of their project and the digital platforms they used in their research.

  5. Second International MELODI Workshop on Low Dose Risk Research - Slides of the presentations

    International Nuclear Information System (INIS)

    Repussard, J.; Weiss, W.; Quintana Trias, O.; Rosario Perez, M. del; Andersen, M.; Rudiger Trott, K.; Ottolenghi, A.; Smyth, V.; Graw, J.; Little, M.P.; Yonai, S.; Barcellos-Hoff, M.H.; Bouffler, S.; Chevillard, S.; Jeggo, P.; Sabatier, L.; Baatout, S.; Niwa, O.; Oesch, F.; Atkinson, M.; Averbeck, D.; Lloyd, D.; O'Neill, P.

    2011-01-01

    The MELODI (Multidisciplinary European Low Dose Initiative) mission is to impulse low dose risk research in Europe through a strategic research agenda (SRA) and road-map of priorities. The last presentation is dedicated to the SRA and its preference research programs. The other presentations deal principally with the low-dose exposure in medical uses of ionizing radiations, radiosensitivity, radiation-induced cataracts, or epidemiology and radiobiology of cardiovascular disease. This document is composed of the slides of the presentations

  6. Fox Chase Cancer Center's Genitourinary Division: a national resource for research, innovation and patient care.

    Science.gov (United States)

    Uzzo, Robert G; Horwitz, Eric M; Plimack, Elizabeth R

    2016-04-01

    Founded in 1904, Fox Chase Cancer Center remains committed to its mission. It is one of 41 centers in the country designated as a Comprehensive Cancer Center by the National Cancer Institute, is a founding member of the National Comprehensive Cancer Network, holds the magnet designation for nursing excellence, is one of the first to establish a family cancer risk assessment program, and has achieved national distinction because of the scientific discoveries made there that have advanced clinical care. Two of its researchers have won Nobel prizes. The Genitourinary Division is nationally recognized and viewed as one of the top driving forces behind the growth of Fox Chase due to its commitment to initiating and participating in clinical trials, its prolific contributions to peer-reviewed publications and presentations at scientific meetings, its innovations in therapies and treatment strategies, and its commitment to bringing cutting-edge therapies to patients.

  7. 2013 Gordon Research Conference, Inorganic reaction mechanisms, Galveston, TX, March 3-8 2013

    Energy Technology Data Exchange (ETDEWEB)

    Abu-Omar, Mahdi M. [Purdue Univ., West Lafayette, IN (United States)

    2012-12-08

    The 2013 Gordon Conference on Inorganic Reaction Mechanisms will present cutting-edge research on the molecular aspects of inorganic reactions involving elements from throughout the periodic table and state-of-the art techniques that are used in the elucidation of reaction mechanisms. The Conference will feature a wide range of topics, such as homogeneous and heterogeneous catalysis, metallobiochemistry, electron-transfer in energy reactions, polymerization, nitrogen fixation, green chemistry, oxidation, solar conversion, alkane functionalization, organotransition metal chemistry, and computational chemistry. The talks will cover themes of current interest including energy, materials, and bioinorganic chemistry. Sections cover: Electron-Transfer in Energy Reactions; Catalytic Polymerization and Oxidation Chemistry; Kinetics and Spectroscopy of Heterogeneous Catalysts; Metal-Organic Chemistry and its Application in Synthesis; Green Energy Conversion;Organometallic Chemistry and Activation of Small Molecules; Advances in Kinetics Modeling and Green Chemistry; Metals in Biology and Disease; Frontiers in Catalytic Bond Activation and Cleavage.

  8. 2012 Gordon Research Conference, Plant molecular biology, July 15-20 2012

    Energy Technology Data Exchange (ETDEWEB)

    Sussman, Michael R. [Univ. of Wisconsin, Madison, WI (United States)

    2013-07-20

    The 2012 Gordon Conference on Plant Molecular Biology will present cutting-edge research on molecular aspects of plant growth and development, with particular emphasis on recent discoveries in molecular mechanisms involved with plant signaling systems. The Conference will feature a wide range of topics in plant molecular biology including hormone receptors and early events in hormone signaling, plant perception of and response to plant pathogen and symbionts, as well as technological and biological aspects of epigenomics particularly as it relates to signaling systems that regulate plant growth and development. Genomic approaches to plant signaling will be emphasized, including genomic profiling technologies for quantifying various biological subsystems, such as the epigenome, transcriptome, phosphorylome, and metabolome. The meeting will include an important session devoted to answering the question, "What are the biological and technological limits of plant breeding/genetics, and how can they be solved"?

  9. The emancipatory character of action research, its history and the present state of the art

    NARCIS (Netherlands)

    Boog, B.

    2003-01-01

    Right from the start. action research was intended to be emancipatory research, and it still is. This article will underpin this by outlining its history and the present state of the art. Though a variety of action research approaches have developed along divergent theoretical pathways, it will be

  10. Present status and future perspective of research and test reactors in JAERI

    International Nuclear Information System (INIS)

    Baba, Osamu; Kaieda, Keisuke

    1999-01-01

    Since 1957, Japan Atomic Energy Research Institute (JAERI) has constructed several research and test reactors to fulfil a major role in the study of nuclear energy and fundamental research. At present, four reactors, the Japan Research Reactor No. 3 and No. 4 (JRR-3M and JRR-4 respectively), the Japan Materials Testing Reactor (JMTR) and the Nuclear Safety Research Reactor (NSRR), are in operation, and a new High Temperature Engineering Test Reactor (HTTR) has reached first criticality and is waiting for the power-up test. This paper introduce these reactors and describe their present operational status. The recent tendency of utilization and future perspectives are also reported. (author)

  11. Present status and future perspective of research and test reactors in JAERI

    Energy Technology Data Exchange (ETDEWEB)

    Baba, Osamu [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Kaieda, Keisuke

    1999-08-01

    Since 1957, Japan Atomic Energy Research Institute (JAERI) has constructed several research and test reactors to fulfil a major role in the study of nuclear energy and fundamental research. At present, four reactors, the Japan Research Reactor No. 3 and No. 4 (JRR-3M and JRR-4 respectively), the Japan Materials Testing Reactor (JMTR) and the Nuclear Safety Research Reactor (NSRR), are in operation, and a new High Temperature Engineering Test Reactor (HTTR) has reached first criticality and is waiting for the power-up test. This paper introduce these reactors and describe their present operational status. The recent tendency of utilization and future perspectives are also reported. (author)

  12. Information Presentation: Human Research Program - Space Human Factors and Habitability, Space Human Factors Engineering Project

    Science.gov (United States)

    Holden, Kristina L.; Sandor, Aniko; Thompson, Shelby G.; Kaiser, Mary K.; McCann, Robert S.; Begault, D. R.; Adelstein, B. D.; Beutter, B. R.; Wenzel, E. M.; Godfroy, M.; hide

    2010-01-01

    The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. The major areas of work, or subtasks, within this DRP are: 1) Displays, 2) Controls, 3) Electronic Procedures and Fault Management, and 4) Human Performance Modeling. This DRP is a collaborative effort between researchers atJohnson Space Center and Ames Research Center. T

  13. Past, present and future of dust research at the Elliot Lake Laboratory

    International Nuclear Information System (INIS)

    Grenier, M.; Bigu, J.

    1985-12-01

    A brief history of the dust research work at the Elliot Lake Laboratory is given. Two decades of dust research work are studied and reviewed. This review clearly shows where, when, and with what intensity various components of dust research were performed. From the data presented here, it is suggested that a major portion of the future efforts be aimed at research directed towards the control and suppression of dust in underground mines

  14. UNIVERSITY BASIC RESEARCH AND APPLIED AGRICULTURAL BIOTECHNOLOGY

    OpenAIRE

    Xia, Yin

    2004-01-01

    I examine the effects of R&D inputs on the subset of life-science outputs which demonstrably has influenced later technology, as evidenced by literature citations in agricultural biotechnology patents. Universities are found to be a principal seedbed for cutting-edge technology development. A university's life-science research budget strongly affects its technology-relevant life-science output as well as graduate education.

  15. Corporate governance research in "the rest of the world"

    OpenAIRE

    K.R. Balachandran; A. Dossi; W.A. Van der Stede

    2010-01-01

    The United States has led the way in academic corporate governance research. This is not unwelcome, nor should it be gullibly criticized or impulsively dismissed. Even if such research inarguably takes place both within a given academic tradition, as well as within a particular institutional corporate governance context, we stand to learn a lot from it despite any such contextual strictures. Insightful, cutting-edge, and innovative research should be invaluable wherever it initiates....

  16. International seminar series on mathematics and applied mathematics and a series of three focused international research workshops on engineering mathematics organised by the Research Environment in Mathematics and Applied Mathematics at Mälardalen University from autumn 2014 to autumn 2015: the International Workshop on Engineering Mathematics for Electromagnetics and Health Technology; the International Workshop on Engineering Mathematics, Algebra, Analysis and Electromagnetics; and the 1st Swedish-Estonian International Workshop on Engineering Mathematics, Algebra, Analysis and Applications

    CERN Document Server

    Rancic, Milica

    2016-01-01

    This book highlights the latest advances in engineering mathematics with a main focus on the mathematical models, structures, concepts, problems and computational methods and algorithms most relevant for applications in modern technologies and engineering. It addresses mathematical methods of algebra, applied matrix analysis, operator analysis, probability theory and stochastic processes, geometry and computational methods in network analysis, data classification, ranking and optimisation. The individual chapters cover both theory and applications, and include a wealth of figures, schemes, algorithms, tables and results of data analysis and simulation. Presenting new methods and results, reviews of cutting-edge research, and open problems for future research, they equip readers to develop new mathematical methods and concepts of their own, and to further compare and analyse the methods and results discussed. The book consists of contributed chapters covering research developed as a result of a focused interna...

  17. An Attempt to Improve Students' Presentation Skills via Course of Graduation Research and its Educational Effects

    Science.gov (United States)

    Yamaguchi, Kenji; Ohtuka, Sigeru; Morita, Shinichi; Matsumoto, Itaru; Yakabe, Masaki; Hayamizu, Yasutaka; Ohtuka, Kouichi

    The importance of presentation skills rapidly increases in engineering education in Japan. The authors have applied various teaching-method of presentation skills to the course of graduation research for the fifth-grade students of the mechanical engineering program in Yonago National College of Technology. The lectures including teachers' demonstration and basic skills in presentation have resulted in improvement of students' skills. The meeting for announcing the results of graduation research has been opened to the public in cooperation with the Yonago Chamber of Commerce and Industry to give the students incentives to graduation research as well as presentation. The students have mutually evaluated their presentation to get good opportunities for even self-evaluation. This paper discusses the effects and problems of our educational practice.

  18. NCR-days 2004; research for managing rivers: present and future issues

    NARCIS (Netherlands)

    Makaske, B.; Os, van A.G.

    2005-01-01

    These proceedings are the product of the NCR days 2004, held 46 November 2004 in Wageningen.The NCR days are a yearly conference at which mainly young scientists present their ongoing research on a wide variety of fluvial subjects. The 46 contributions (oral presentations and posters) to the

  19. The NASA Electronic Parts and Packaging (NEPP) Program - Presentation to Korean Aerospace Research Institute

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2016-01-01

    This presentation will provide basic information about NASA's Electronic Parts and Packaging Program (NEPP), for sharing with representatives of the South Korean Aerospace Research Institute (KARI) as part of a larger presentation by Headquarters Office of Safety and Mission Assurance. The NEPP information includes mission and goals, history of the program, basic focus areas, strategies, deliverables and some examples of current tasks.

  20. Proceedings of the meeting and scientific presentations on basic science research and nuclear technology

    International Nuclear Information System (INIS)

    Prayitno; Slamet Santosa; Darsono; Syarip; Agus Taftazani; Samin; Tri Mardji Atmono; Dwi Biyantoro; Herry Poernomo; Prajitno; Tjipto Sujitno; Gede Sutresna W; Djoko Slamet Pujorahardjo; Budi Setiawan; Bambang Siswanto; Endro Kismolo; Jumari

    2016-08-01

    The Proceedings of the Meeting and Scientific Presentations on Basic Science Research and Nuclear Technology by Center for Accelerator Science and Technology in Yogyakarta with the theme of Universities and research and development institutions synergy in the development of basic science and nuclear technology held on Surakarta 9 August 2016. This seminar is an annual routine activities of Center for Accelerator Science and Technology for exchange research result among University and BATAN researcher for using nuclear technology. The proceeding consist of 3 article from keynotes’ speaker and 37 articles from BATAN participant as well as outside which have been indexed separately. (MPN)

  1. Present status and future perspectives of research and test reactor in Japan

    International Nuclear Information System (INIS)

    Kaneko, Yoshihiko; Kaieda, Keisuke

    2000-01-01

    Since 1957, Japan Atomic Energy Research Institute (JAERI) has constructed several research and test reactors to fulfill a major role in the study of nuclear energy and fundamental research. At present four reactors, the Japan Research Reactor No. 3 and No. 4 (JRR-3M and JRR-4 respectively), the Japan Materials Testing Reactor (JMTR) and the Nuclear Safety Research Reactor (NSRR) are in operation, and a new High Temperature Engineering Test Reactor (HTTR) has recently reached first criticality and now in the power up test. In 1966, the Kyoto University built the Kyoto University Reactor (KUR) and started its operation for joint use program of the Japanese universities. This paper introduces these reactors and describes their present operational status and also efforts for aging management. The recent tendency of utilization and future perspectives is also reported. (author)

  2. Present status and future perspectives of research and test reactor in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kaneko, Yoshihiko [Atomic Energy Research Laboratory, Musashi Institute of Technology, Kawasaki, Kanagawa (Japan); Kaieda, Keisuke [Department of Research Reactor, Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan)

    2000-10-01

    Since 1957, Japan Atomic Energy Research Institute (JAERI) has constructed several research and test reactors to fulfill a major role in the study of nuclear energy and fundamental research. At present four reactors, the Japan Research Reactor No. 3 and No. 4 (JRR-3M and JRR-4 respectively), the Japan Materials Testing Reactor (JMTR) and the Nuclear Safety Research Reactor (NSRR) are in operation, and a new High Temperature Engineering Test Reactor (HTTR) has recently reached first criticality and now in the power up test. In 1966, the Kyoto University built the Kyoto University Reactor (KUR) and started its operation for joint use program of the Japanese universities. This paper introduces these reactors and describes their present operational status and also efforts for aging management. The recent tendency of utilization and future perspectives is also reported. (author)

  3. Research and higher education background of the Paks Nuclear Power Plant, Hungary. Past and present

    International Nuclear Information System (INIS)

    Csom, Gy.

    2002-01-01

    The connection of the Paks Nuclear Power Plant, Hungary, with research and development as well as with higher education is discussed. The main research areas include reactor physics, thermohydraulics, radiochemistry and radiochemical analysis, electronics and nuclear instruments, computers, materials science. The evolution of relations with higher education in Hungary and the PNPP is presented, before and after the installation of the various units. (R.P.)

  4. The Present Affairs and Issues of Research on Collaborative Learning in Mathematics Education

    OpenAIRE

    松島, 充

    2014-01-01

    In this research, at first, the previous work of collaborative learning and cooperative learning was investigated on learning sciences and cognitive psychology. It is clarified the difference of interde-pendent, of the epistemology and of the subject who construct knowledge. The secondly, investigation since 1990 of the collaborative learning research in mathematics educa-tion was conducted based on eight sorts of mathematics education academic journals, and the present affairs and the issues...

  5. Status of health and environmental research relative to coal gasification 1976 to the present

    Energy Technology Data Exchange (ETDEWEB)

    Wilzbach, K.E.; Reilly, C.A. Jr. (comps.)

    1982-10-01

    Health and environmental research relative to coal gasification conducted by Argonne National Laboratory, the Inhalation Toxicology Research Institute, and Oak Ridge National Laboratory under DOE sponsorship is summarized. The studies have focused on the chemical and toxicological characterization of materials from a range of process streams in five bench-scale, pilot-plant and industrial gasifiers. They also address ecological effects, industrial hygiene, environmental control technology performance, and risk assessment. Following an overview of coal gasification technology and related environmental concerns, integrated summaries of the studies and results in each area are presented and conclusions are drawn. Needed health and environmental research relative to coal gasification is identified.

  6. Nuclear Research Institute Rez: Its past and present and future challenges

    International Nuclear Information System (INIS)

    Pazdera, F.

    2001-01-01

    The paper gives an overview of the history of the Nuclear Research Institute Rez development over forty years of its existence. Its present activities are discussed in some detail. These historical and present activities represent the basis for discussing: challenges faced by the NRI; interactions of NRI with their environment; collaboration and co-operation. Nuclear research centres would continue to be the main source of expertise for power plant operation, radiation and isotope applications, regulatory practices and waste management. Future developments should ensure viability of these centres. (author)

  7. Epidemiologic research topics in Germany: a keyword network analysis of 2014 DGEpi conference presentations.

    Science.gov (United States)

    Peter, Raphael Simon; Brehme, Torben; Völzke, Henry; Muche, Rainer; Rothenbacher, Dietrich; Büchele, Gisela

    2016-06-01

    Knowledge of epidemiologic research topics as well as trends is useful for scientific societies, researchers and funding agencies. In recent years researchers recognized the usefulness of keyword network analysis for visualizing and analyzing scientific research topics. Therefore, we applied keyword network analysis to present an overview of current epidemiologic research topics in Germany. Accepted submissions to the 9th annual congress of the German Society for Epidemiology (DGEpi) in 2014 were used as data source. Submitters had to choose one of 19 subject areas, and were ask to provide a title, structured abstract, names of authors along with their affiliations, and a list of freely selectable keywords. Keywords had been provided for 262 (82 %) submissions, 1030 keywords in total. Overall the most common keywords were: "migration" (18 times), "prevention" (15 times), followed by "children", "cohort study", "physical activity", and "secondary data analysis" (11 times each). Some keywords showed a certain concentration under one specific subject area, e.g. "migration" with 8 of 18 in social epidemiology or "breast cancer" with 4 of 7 in cancer epidemiology. While others like "physical activity" were equally distributed over multiple subject areas (cardiovascular & metabolic diseases, ageing, methods, paediatrics, prevention & health service research). This keyword network analysis demonstrated the high diversity of epidemiologic research topics with a large number of distinct keywords as presented at the annual conference of the DGEpi.

  8. Satellite Remote Sensing of Coral Reefs: By Learning about Coral Reefs, Students Gain an Understanding of Ecosystems and How Cutting-Edge Technology Can Be Used to Study Ecological Change

    Science.gov (United States)

    Palandro, David; Thoms, Kristin; Kusek, Kristen; Muller-Karger, Frank; Greely, Teresa

    2005-01-01

    Coral reefs are one of the most important ecosystems on the planet, providing sustenance to both marine organisms and humans. Yet they are also one of the most endangered ecosystems as coral reef coverage has declined dramatically in the past three decades. Researchers continually seek better ways to map coral reef coverage and monitor changes…

  9. Variable Reporting by Authors Presenting Arthroplasty Research at Multiple Annual Conferences.

    Science.gov (United States)

    Choo, Kevin J; Yi, Paul H; Burns, Robert; Mohan, Rohith; Wong, Kevin

    2017-01-01

    Prior studies have demonstrated discrepancies in financial conflict of interest (COI) disclosure among authors presenting research at multiple spine and sports medicine conferences. The purpose of this study was to quantify the variability of self-reported financial disclosures of individual authors presenting at multiple arthroplasty conferences during the same year. The author disclosure information published for the 2012 annual meetings of the American Academy of Orthopaedic Surgeons (AAOS), American Association of Hip and Knee Surgeons, the Hip Society, and the Knee Society were compiled. We tabulated the author disclosures, the number of companies/entities represented, and the types of disclosures reported. The disclosures made by authors presenting at more than one meeting were then compared for discrepancies. Of the 209 authors who presented at both the AAOS and American Association of Hip and Knee Surgeons meetings, 79 (37.79%) demonstrated discrepancies in their disclosures with 7 (8.8%) reporting no disclosures to the AAOS. Of the 84 authors who presented at both the AAOS and Hip Society meetings, 1 (1.19%) had discrepancies in their disclosures. Of the 52 authors who presented at both the AAOS and Knee Society meetings, 2 (3.84%) had discrepancies in their disclosures. There is variability in reported financial COIs by authors presenting at multiple arthroplasty conferences within the same year. Further work is warranted to improve transparency of COI disclosures among arthroplasty surgeons presenting research at national meetings. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. Present status of research activities on transmutation of actinides in Japan

    International Nuclear Information System (INIS)

    Amano, Hiroshi

    1978-01-01

    In Japan, the idea to make use of transmutation for the final disposal method of HLW was first examined by Ichimiya, Amano, Hamada et al., when the Japan Atomic Industry forum had organized a study committee for HLW treatment in 1973. This article has the scope to outline the present research activities on transmutation of actinides in Japan

  11. Making History Relevant to Students by Connecting Past, Present and Future: A Framework for Research

    Science.gov (United States)

    Van Straaten, Dick; Wilschut, Arie; Oostdam, Ron

    2016-01-01

    History teaching usually focuses on understanding the past as an aim in itself. Research shows that many students do not see the point of this and perceive history as not very useful. Yet history plays a major role in the orientation on present and future. If students fail to see this, the question arises whether this is due to a lack of explicit…

  12. Public Presentation versus Private Actions in Psychotherapy Research, Training and Practice.

    Science.gov (United States)

    McMullen, Linda M.

    1995-01-01

    Reacts to Martin's (1995) essay concerning scientism in psychotherapy. Contends that the image psychotherapists' present to the public is often quite different from private actions, and that a focus of these private actions might reveal not only a less scientific endeavor, but also a paradigm for future research. (JPS)

  13. A Review of Research on Sport Education: 2004 to the Present

    Science.gov (United States)

    Hastie, Peter A.; de Ojeda, Diego Martinez; Luquin, Antonio Calderon

    2011-01-01

    Background: In 2005, Wallhead and O'Sullivan presented a review of research on the Sport Education model. In that review, the authors identified certain strengths of the model (particularly persistent team membership) in facilitating student engagement within student-centered learning tasks. Other areas (such as student leadership skills) were…

  14. Initial experience with a group presentation of study results to research participants

    Directory of Open Access Journals (Sweden)

    Bent Stephen

    2008-03-01

    Full Text Available Abstract Background Despite ethical imperatives, informing research participants about the results of the studies in which they take part is not often performed. This is due, in part, to the costs and burdens of communicating with each participant after publication of the results. Methods Following the closeout and publication of a randomized clinical trial of saw palmetto for treatment of symptoms of benign prostatic hyperplasia, patients were invited back to the research center to participate in a group presentation of the study results. Results Approximately 10% of participants attended one of two presentation sessions. Reaction to the experience of the group presentation was very positive among the attendees. Conclusion A group presentation to research participants is an efficient method of communicating study results to those who desire to be informed and was highly valued by those who attended. Prospectively planning for such presentations and greater scheduling flexibility may result in higher attendance rates. Trial Registration Number Clinicaltrials.gov #NCT00037154

  15. Ergonomics: A bridge between fundamentals and applied research

    OpenAIRE

    Ghosh, Subrata; Bagchi, Anandi; Sen, Devashish; Bandyopadhyay, Pathikrit

    2011-01-01

    Ergonomics is becoming a subject of applying fundamentals on anthropocentric dimensions for holistic welfare. The so-called conflict between Basic science and Applied research finds one of its edges in Ergonomics. Be it cutting-edge technology or frontiers of scientific innovation-all start from understanding basic scientific aptitude and skill, and the best way to get familiar with the situation is practicing basic science again and again at a regular basis. Ergonomics is diversified in such...

  16. Disseminating research information through Facebook and Twitter (DRIFT): presenting an evidence-based framework.

    Science.gov (United States)

    Ryan, Gemma; Sfar-Gandoura, Hanah

    2018-05-02

    The social media platform Facebook boasts of having more than 1,284 million daily active users globally. A large proportion of adults use the internet to seek health-related information. To critically analyse the use of social media to engage parents of children with attention deficit hyperactivity disorder (ADHD) with the findings of clinical research. Observation and qualitative content analysis combined with Facebook Audience Insights were used to evaluate the levels of engagement and interaction with different types of research information. More than 1,100 people from 41 nations engaged with the group. Sharing information through a range of Facebook functions was found to successfully achieve engagement and reach this demographic nationally and internationally. Lay research users are eager to engage and understand clinical research. Social media platforms are an appropriate way to disseminate research. This paper presents a much-needed evidence-based framework that nursing and health researchers can use for effective communication. © 2018 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

  17. Overview of bryophyte flora research in Serbia with presentation of the Serbian BRYO database

    Directory of Open Access Journals (Sweden)

    Pantović Jovana

    2017-10-01

    Full Text Available Bryophyte flora research in Serbia was rather sporadic until the end of the 19th century, when a group of mostly high-school teachers started researching bryophytes. This was the first fruitful period of exploration, with many new country records. Thereafter, not many researchers investigated bryophytes in Serbia, and the majority of chorological data came from vegetation, ecological, or palaeobotanical studies. This lasted until the 1990s, when a revival of bryophyte investigation occurred, bringing with it many floristic studies and new species records for the country. At the present time, Serbia is considered to be rich in bryophyte diversity, with as many as 797 species. However, further study and a critical approach to the bryophyte flora of Serbia are needed.

  18. Incorporating Cutting Edge Scientific Results from the Margins-Geoprisms Program into the Undergraduate Curriculum, Rupturing Continental Lithosphere Part II: Introducing Euler Poles Using Baja-North America Relative Plate Motion Across the Gulf of California

    Science.gov (United States)

    Loveless, J. P.; Bennett, S. E. K.; Cashman, S. M.; Dorsey, R. J.; Goodliffe, A. M.; Lamb, M. A.

    2014-12-01

    The NSF-MARGINS Program funded a decade of research on continental margin processes. The NSF-GeoPRISMS Mini-lesson Project, funded by NSF-TUES, is designed to integrate the significant findings from the MARGINS program into open-source college-level curriculum. The Gulf of California (GOC) served as the focus site for the Rupturing Continental Lithosphere (RCL) initiative, which addressed several scientific questions: What forces drive rift initiation, localization, propagation and evolution? How does deformation vary in time and space, and why? How does crust evolve, physically and chemically, as rifting proceeds to sea-floor spreading? What is the role of sedimentation and magmatism in continental extension? We developed two weeks of curriculum, including lectures, labs, and in-class activities that can be used as a whole or individually. This component of the curriculum introduces students to the Euler pole description of relative plate motion (RPM) by examining the tectonic interactions of the Baja California microplate and North American plate. The plate boundary varies in rift obliquity along strike, from highly oblique and strike-slip dominated in the south to slightly less oblique and with a larger extensional component in the north. This Google Earth-based exercise provides students with a visualization of RPM using small circle contours of the local direction and magnitude of Baja-North America movement on a spherical Earth. Students use RPM to calculate the fault slip rates on transform, normal, and oblique-slip faults and examine how the varying faulting styles combine to accommodate RPM. MARGINS results are integrated via comparison of rift obliquity with the structural style of rift-related faults around the GOC. We find this exercise to fit naturally into courses about plate tectonics, geophysics, and especially structural geology, given the similarity between Euler pole rotations and stereonet-based rotations of structural data.

  19. The new realized mobile device for extremal control research and presentation

    Directory of Open Access Journals (Sweden)

    Matej URBANSKÝ

    2015-12-01

    Full Text Available At our department we deal with torsional oscillating mechanical systems (TOMS continuous tuning during its operation in terms of torsional oscillation size. Therefore was build the new mobile device for research and presentation purposes of the TOMS continuous tuning using extremal control method. This paper deals mainly with design of the mobile device and its special compressed air distribution system, which is necessary for its regular function.

  20. Proceedings of the 2010 AFMS Medical Research Symposium. Volume 5. Nursing Track: Abstracts and Presentations

    Science.gov (United States)

    2011-03-15

    Management Education at a Military Hospital .................................................................. 29  Proceedings of the 2010 AFMS... education information is in Appendix C of this volume. Appendices D-L are copies of presentation slides from the plenary sessions.  Volume 2. This volume...women who have menstruation as compared to deployed women who do not have menstruation ? This study is a descriptive co relational research design. The

  1. Escola e fábrica: vozes de trabalhadores em uma indústria de ponta School and factory in the voice of workers from a cutting-edge industry

    Directory of Open Access Journals (Sweden)

    Celso João Ferretti

    2003-03-01

    Full Text Available O objetivo deste artigo é o de apresentar parte dos resultados de ampla pesquisa, na qual se estudou a qualificação como construção social, privilegiando-se dois campos de análise: a escola e a fábrica. A pesquisa focalizou uma escola pública, duas unidades do Senai e uma indústria metal-mecânica, localizada no interior do Estado de São Paulo. Neste artigo, discutem-se alguns dados obtidos no âmbito da fábrica, com destaque para o olhar dos trabalhadores sobre as contribuições da escola e da empresa para seu processo de qualificação profissional. Os resultados indicam que há consenso entre os entrevistados sobre o valor da escolarização, não só para o exercício da profissão, mas para a vida social e familiar. Os procedimentos adotados pela indústria, visando à qualificação profissional e à adesão dos trabalhadores aos objetivos empresariais, são também muito bem aceitos. A análise dos dados permitiu, todavia, desvelar conflitos, contradições e idealizações que os discursos consensuais não conseguem de todo ocultar.The aim of this article is to present part of the results of a broader study, in which qualification as a social construction was studied, giving special attention to two fields of analysis: school and factory. The investigation was concentrated on a public school, two Senai technical school units, and a metal-mechanic industry located in the interior of São Paulo State. Only some of the data obtained in the factory are discussed in this article, giving emphasis on how workers see the school and the company's contributions to their professional qualification process. Results point to a consensus among interviewees about the value of education for both their professional work and their social and family life. Procedures adopted by the company aiming at promoting both professional qualification and workers' adherence to corporate objectives are also very well accepted. Nonetheless, analysis of the

  2. Studies in Teaching: 2016 Research Digest. Action Research Projects Presented at Annual Research Forum (Winston-Salem, North Carolina, Jun 30, 2016)

    Science.gov (United States)

    McCoy, Leah P., Ed.

    2016-01-01

    This document presents the proceedings of the 21st Annual Research Forum held June 30, 2016, at Wake Forest University in Winston-Salem, North Carolina. Included are the following 11 action research papers: The Use of Mexican Folk Art to Develop Oral and Written Language Ability and Cultural Awareness in the Secondary Spanish Classroom (Antonio…

  3. Studies in Teaching: 2015 Research Digest. Action Research Projects Presented at Annual Research Forum (Winston-Salem, North Carolina, June 25, 2015)

    Science.gov (United States)

    McCoy, Leah P., Ed.

    2015-01-01

    This document presents the proceedings of the 20th Annual Research Forum held June 25, 2015, at Wake Forest University in Winston-Salem, North Carolina. Included are the following 21 action research papers: (1) History Lives! The Use of Simulations in a High School Social Studies Classroom (Lydia Adkins); (2) Using Francophone Music in the High…

  4. Studies in Teaching: 2017 Research Digest. Action Research Projects Presented at Annual Research Forum (Winston-Salem, North Carolina, June 29, 2017)

    Science.gov (United States)

    McCoy, Leah P., Ed.

    2017-01-01

    This document presents the proceedings of the 22nd Annual Research Forum held June 29, 2017, at Wake Forest University in Winston-Salem, North Carolina. Included are the following 12 action research papers: (1) Using Captioned Video to Teach Listening Comprehension in a Spanish Classroom (Michelle Allen); (2) Multimodal Instruction: How Film…

  5. Tales from the Dark Side: Teacher Professional Development , Support , Activities, Student Research & Presentations

    Science.gov (United States)

    Walker, C. E.; Pompea, S. M.

    2013-12-01

    In a partnership last Spring with Arizona Public Service, the National Optical Astronomy Observatory (NOAO) created the 'Dark-Skies Energy Education Program: Energy Awareness for a Sustainable Future'. In this program, experienced science and technology education specialists from NOAO led 2 one-day professional development workshops for thirteen 6th grade teachers on dark skies and energy education. The workshops focused on three foundational, scaffolding activities and a final student research project. This in turn culminated in a Family Science Night where students presented their projects. In between these events, our NOAO team provided support for teachers through real-time video conferencing using FaceTime. In addition to the professional development, each teacher received a kit full of resource materials to perform the activities and research project. The kit was at no cost to the teacher, school, or district. Each kit contained the latest version of a tablet, which was used to facilitate communication and support for the teachers, as well as provide all the program's written teaching materials. The activities are in accordance with state, Common Core and Next Generation Science Standards. Our NOAO instructors gave firsthand experiences on how best to use these materials in a classroom or public setting. They also discussed opportunities on how they can incorporate, adapt and expand upon the activities and research projects in the classroom. Evaluation reports from the program's independent evaluator showed that the students enjoyed learning from the three foundational activities and research projects. The project presentations by the Yuma students were outstanding in their creativity, level of effort, and scientific accuracy. To summarize the evaluations, significant changes in knowledge and attitude were made with the teachers and students (from one-on-one interviews and surveys), but behavioral changes (albeit only over a semester) seemed minimal. The AGU

  6. Poster presentations at medical conferences: an effective way of disseminating research?

    Science.gov (United States)

    Goodhand, J R; Giles, C L; Wahed, M; Irving, P M; Langmead, L; Rampton, D S

    2011-04-01

    This study aimed to ascertain the value of posters at medical meetings to presenters and delegates. The usefulness of posters to presenters at national and international meetings was evaluated by assessing the numbers of delegates visiting them and the reasons why they visited. Memorability of selected posters was assessed and factors influencing their appeal to expert delegates identified. At both the national and international meetings, very few delegates (posters. Only a minority read them and fewer asked useful questions. Recall of content was so poor that it prevented identification of factors improving their memorability. Factors increasing posters' visual appeal included their scientific content, pictures/graphs and limited use of words. Few delegates visit posters and those doing so recall little of their content. To engage their audience, researchers should design visually appealing posters by presenting high quality data in pictures or graphs without an excess of words.

  7. Present state of the monitoring for internal contamination at Tokai Research Establishment, Japan Atomic Energy Research Institute

    International Nuclear Information System (INIS)

    Akaishi, J.; Fukuda, H.; Mizushita, S.

    1980-01-01

    At Tokai Research Establishment, JAERI, over one thousand people work in hot areas such as reactors, accelerators, chemical laboratories and waste treatment plants. The monitoring for internal contamination of this personnel is presented. Routine and special monitoring are carried out. The object of the former is to check for the presence of significant contamination, and that of the latter is to estimate body burden and committed dose equivalent, if necessary. Heavy shield and shadow shield whole body counters, a low energy lung counter and a wound monitor are used to detect the internal contamination due to γ or chi ray emitters, and bioassay technique is used for α or β emitters and uranium. The results of the monitoring until now are presented. (H.K.)

  8. The Virtual Poster Showcase: Opportunities for students to present their research from anywhere

    Science.gov (United States)

    Asher, P. M.; Furukawa, H.; Williams, B. M.; Holm Adamec, B.

    2015-12-01

    Although many students conduct research with faculty in organized summer programs or as part of their course work or their degree work, they often face barriers to traveling to present that research, especially at national or international conferences. This is especially true for students who are members of underrepresented minority populations and students studying outside of the United States. A new and exciting opportunity for undergraduate as well as graduate students to showcase their work is now available. AGU piloted three opportunities for an undergraduate and graduate virtual poster showcase in the fall of 2015. Student participants were recruited from a diverse array of groups including minority-serving organizations, two-year colleges, and internship programs at federal agencies and national laboratories. Students uploaded an abstract, poster, and short video explain their research, and then participated in Q&A sessions with peers as well as expert judges. This presentation will share characteristics of participating groups, lessons learned from this new program, and preliminary evaluation findings as well as plans for the future.

  9. A pilot study: research poster presentations as an educational tool for undergraduate epidemiology students

    Directory of Open Access Journals (Sweden)

    Deonandan R

    2013-09-01

    Full Text Available Raywat Deonandan, James Gomes, Eric Lavigne, Thy Dinh, Robert Blanchard Interdisciplinary School of Health Sciences, University of Ottawa, Ottawa, ON, Canada Abstract: Students in a fourth year epidemiology course were surveyed after participating in a formal Science Research Day in which they presented original research, in poster form, to be judged by scientists from the community. Of 276 participating students, 80 (29% responded to the study survey. As a result, 19% of respondents were more likely to pursue a career in science, and 27.5% were more likely to pursue a career in epidemiology. Only one respondent reported being less likely to pursue a science career, while seven were less likely to pursue epidemiology. A majority of respondents felt that the poster experience was on par with, or superior to, a comparable research paper, in terms of both educational appeal and enjoyment. Mandatory, formal poster presentations are an innovative format for teaching advanced health sciences, and may more accurately reflect the realities of a science career than do more traditional educational formats. Keywords: epidemiology, education, undergraduate, research–teaching nexus

  10. Present state of research and development of atomic energy in five Asian countries

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The survey group for Asian atomic energy cooperation was dispatched by the Japanese government, and toured Philippines, Indonesia, Malaysia, Thailand and Bangladesh from September 7 to 19, 1980. The present state of atomic energy development and the energy situation in respective countries were surveyed through the exchange of opinion and the inspection of related facilities. The Regional Cooperative Agreement for Research, Development and Training Related to Nuclear Science and Technology was concluded in June, 1972, and 12 countries have participated in it. It was impressive that respective countries have the peculiar energy policies corresponding to their objective conditions. They regard atomic energy as the important substitute energy for petroleum, but the fear about the safety of atomic energy and the movement against nuclear power generation have been growing considerably. The research and development on atomic energy are carried out very actively in respective countries, and the construction of large-scale research centers was commenced in Indonesia, Malaysia and Bangladesh. Research reactors have been operated in Philippines, Indonesia and Thailand since about 20 years ago, and the utilization of radioisotopes and radiation has been studied. The cooperation of Japan with these countries is far behind that of other advanced countries.

  11. From research to production: field induced electro-mechanical polymer-transducer (Conference Presentation)

    Science.gov (United States)

    Kovacs, Gabor M.

    2017-04-01

    In the past decades the development of compliant dielectric materials, capable of storing high electric energy density, is the object of considerable research efforts for commercial applications. Compared to the widely used soft dielectrics as compliant insulators, only a small variety of commercially products based on dielectric polymer transducers are available on the market up to date. A whole bunch of research activities worldwide has created a lot of very useful knowledge; but many researchers have been faced to different obstacles to manufacture devices for demonstrations. However, building handy demonstrators is one of the most relevant action in order to attract the interest of decision makers of industrial companies. Moreover, low cost devices strictly require highly efficient production methods and facilities to become competitive on the market. This aspect contains the ultimate requirement especially for very high output rates and represents one of the major topic at most negotiations. All technological problems linked to this issue have been addressed only a little in the past R+D activities and are still widely not satisfactory solved. The present talk will provide an overview of the options for opening the door of industrial production of polymer transducers and the remaining obstacles to be solved for the next step. In particular, the most relevant actions to be taken for enabling high capacity production at very low cost will be discussed, which have an essential impact on the direction of future research activities.

  12. The Accuracy of the Information Presented in Credit Bureau Reports: Research and Comparative Analysis

    Directory of Open Access Journals (Sweden)

    Vladimir Simović

    2015-12-01

    Full Text Available This paper presents research results regarding information accuracy in the Serbian credit bureau reports and tries to identify the reasons which affect the accuracy of the information presented in credit bureau reports, in global terms. The research was conducted by interviewing respondents. Comparative analysis was used in order to formulate proposal of factors which determine information accuracy in the credit bureau reports. The results show that the materially significant errors in information presented in Serbian credit bureau reports make 0.5% of the sample. This implies that creditors in Serbia base their credit decisions on reliable information. The results of this study were compared to results of the studies conducted in USA and Germany in order to formulate proposal of factors which influence the information accuracy in the credit bureau reports. In order toimprove information accuracy in credit bureau reports, in global terms, special attention should be paid to formulation of international standards of credit reporting and identification systems of natural persons and legal entities.

  13. Researching Mental Health Disorders in the Era of Social Media: Systematic Review

    OpenAIRE

    Wongkoblap, Akkapon; Vadillo, Miguel A; Curcin, Vasa

    2017-01-01

    Background: Mental illness is quickly becoming one of the most prevalent public health problems worldwide. Social network platforms, where users can express their emotions, feelings, and thoughts, are a valuable source of data for researching mental health, and techniques based on machine learning are increasingly used for this purpose. Objective: The objective of this review was to explore the scope and limits of cutting-edge techniques that researchers are using for predictive analytics in ...

  14. Photovoltaics - solar power stations. Prospects of a cutting edge technology

    International Nuclear Information System (INIS)

    Heidenreich, M.

    2002-01-01

    Photovoltaics is the sector of the future in this millennium. The process of human urbanization has led to a high demand for electricity; at the same time high-density urban settlement offers an enormous surface area that could be used for photovoltaic equipment. Such surfaces include rooftops, building facades, parking lots for automobiles, train stations and solar soundproofing walls. According to conservative estimates, Austria has sufficient surface area for a peak solar output of 4,000 MW. This would be sufficient to supply some 1.6 million households with electricity from unlimited solar energy. However, a tremendous marketing effort will be required in order to achieve generation on such a scale. (author)

  15. Aptamers: cutting edge technology to combat HIV/AIDS

    CSIR Research Space (South Africa)

    Khati, M

    2007-09-27

    Full Text Available Time (seconds) CD4 Dey, Khati et al. (Nov 2005) J. Virol. 79 (21) Page 21 © CSIR 2006 www.csir.co.za Use aptamers for analysis and neutralization of endemic, South African strains of HIV-1 from adult and pediatric patients...

  16. Cutting edge advanced : student's book : with phrase-builder

    CERN Document Server

    Cunningham, Sarah; Comyns Carr, Jane

    2003-01-01

    A focus on high-frequency useful vocabulary helps students say what they want to say. Regular, well-structured speaking tasks encourage students to express themselves more extensively and fluently. ‘Do You Remember’ sections in every unit and extra. Consolidation modules provide regular review and consolidation Student Books include Mini-Dictionary to help learners study independently.

  17. Attracting Cutting-Edge Skills Through Reserve Component Participation

    Science.gov (United States)

    2003-01-01

    specific recruitment pool of faculty and students within these institutions who possess the state-of-the- art science and technical skills or the most...identify a specific recruitment pool of faculty and students within these institutions who possess the state-of-the- art science and technical skills or

  18. Cutting edge pre-intermediate : workbook : with key

    CERN Document Server

    Moor, Peter

    2003-01-01

    Consolidates and extends essential language covered in the Students' Book. Improve your writing' and 'Listen and read' sections systematically develop skills. Pronunciation and spelling sections improve student confidence in typical problem areas. Accompanied by an optional Student Cassette/Audio CD with exercises on grammar and pronunciation. Includes answer key

  19. Cutting-edge gene editing techniques for increased vaccine yields ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2018-04-09

    Apr 9, 2018 ... Experiments show that reducing the level of IFITMs in chicken cells infected with influenza leads to increased levels of the virus in the ... Accelerating vaccine development for African swine fever virus through synthetic biology.

  20. Robotics at PSE ampersand G: The cutting edge

    International Nuclear Information System (INIS)

    Taylor, G.M.

    1992-01-01

    Public Service Electric ampersand Gas Company's robotics program, which started its momentum in the mid-1980s, has demonstrated a cost-benefit ratio of 1:3 from use of the technology at the utility's three nuclear power units, Salem-1 and-1, and Hope Creek. During PSE ampersand G's first five-year nuclear robotics plan, from April 1986 through December 1991, open-quotes we spent R1.6 million, but we saved $5.3 million,close quotes declared Harry T. Roman, principal engineer/PSE ampersand G robotics and artificial intelligence program manager. open-quotes That's one buck in, three bucks out.close quotes A third of the savings came from reduced dose, a third from fewer person-hours, and a third from decreased plant down-time. This report discusses the development and nuclear/applications of robots at PSE ampersand G

  1. The Educational Legacy of Ronald Reagan. The Cutting Edge

    Science.gov (United States)

    Clabaugh, Gary K.

    2004-01-01

    At this writing former President Reagan has just been interred with much pomp, plus hours of nationally televised praise. Some enthusiasts have even proposed carving the former president's countenance into Mount Rushmore. History will decide whether or not Mr. Reagan ranks as a great, or even good, president. But the indecorous rush to laud his…

  2. Cutting edge issues in the Churg-Strauss syndrome.

    Science.gov (United States)

    Szczeklik, Wojciech; Jakieła, Bogdan; Adamek, Dariusz; Musiał, Jacek

    2013-02-01

    Churg-Strauss syndrome (CSS) is a rare systemic small-vessel vasculitis that develops in the background of bronchial asthma, which is characterized by eosinophilia and eosinophilic infiltration of various tissues. It belongs to the group of antineutrophil cytoplasmic autoantibody (ANCA)-associated vasculitides. The triggering factors and pathogenesis of CSS are still unknown. The possible role of eotaxin-3 and CCR4-related chemokines in selective recruitment of eosinophils to the target tissues in CSS has been recently suggested, but the role of eosinophilic inflammation in the development of vasculitic lesions is not completely understood. From the clinical view, two distinct phenotypes of the disease are slowly emerging depending on the ANCA-positivity status. Glucocorticoids are still the mainstay of treatment; however, data are accumulating regarding the beneficial role of novel immunosuppressants and biologic compounds, especially in patients with poorer prognosis.

  3. Cutting-edge characterization technologies for D and D

    International Nuclear Information System (INIS)

    Bossart, S.J.; Kasper, K.M.

    1998-01-01

    The US Department of Energy's (DOE's) Office of Science and Technology (OST) has been developing and demonstrating technologies to improve methods used to characterize the presence and quantity of contaminants. As a part of OST, the Deactivation and Decommissioning (D and D) Focus Area has been developing and demonstrating innovative technologies for facility characterization to reduce costs associated with this important D and D activity. Characterization activities are an essential and substantial part of D and D. An initial scoping survey must be done to identify personnel hazards and to develop a decommissioning plan. Detailed characterization data must be collected to determine the type and magnitude of contaminants to begin decontamination and dismantlement activities. Surveys must be done during decontamination activities to determine the effectiveness of the decontamination efforts. A final status survey is required, and a confirmatory survey may also be required to document the end-state of a facility. These extensive characterization efforts contribute substantially to the overall cost of a D and D project. Through its Large-Scale Demonstration Program, the D and D Focus Area has been demonstrating many innovative technologies to improve D and D characterization processes. During the large-scale demonstration projects, innovative characterization technologies are evaluated alongside competing baseline technologies. Innovative technology summary reports are being generated on all of these technologies. When they are completed, they will be available through the DOE Office of Science and Technology's Homepage at http://em-52.em.doe.gov/idf/ost/pubs.htm

  4. Cutting edge science: Laser surgery illuminates viscoelasticity of merotelic kinetochores.

    Science.gov (United States)

    Cabello, Simon; Gachet, Yannick; Tournier, Sylvie

    2016-03-28

    Increasing evidence in eukaryotic cells suggests that mechanical forces are essential for building a robust mitotic apparatus and correcting inappropriate chromosome attachments. In this issue, Cojoc et al. (2016. J. Cell Biol., http://dx.doi.org/10.1083/jcb.201506011) use laser microsurgery in vivo to measure and study the viscoelastic properties of kinetochores. © 2016 Cabello.

  5. Mobile Learning on Campus: Balancing on the Cutting Edge

    Science.gov (United States)

    Raths, David

    2010-01-01

    As soon as the Illinois Institute of Technology (IIT) announced last May that it would be giving all 400 incoming freshmen Apple iPads, a lively debate broke out online at TUAW.com (The Unofficial Apple Weblog) between people who saw it as a marketing gimmick to attract students and others who believed it was an honest attempt to implement a new…

  6. Information professionalism in a digital age: cutting edge ...

    African Journals Online (AJOL)

    The paper contends that the need for developing new professional skills is predicated on the evolving electronic environment. The emerging electronic systems provide better and broader platforms for the actualisation of the professional hallmarks of contact, communication and co-operation. Situated at the frontline or ...

  7. The Cutting Edge: Workplace English. Project Handbook and Instructional Guide.

    Science.gov (United States)

    Clymer-Spradling, Carol

    A workplace literacy program for garment workers is described and evaluated. The program, a partnership between El Paso Community College (Texas) and Levi Strauss & Company, consisted of a three-level, job-specific, video-based curriculum for limited-English-speaking employees implemented at seven plants in El Paso. The 18-month model…

  8. The Cutting Edge: Workplace English. Section I: Project Handbook.

    Science.gov (United States)

    El Paso Community Coll., TX. Literacy Center.

    A model workplace literacy program of El Paso Community College (Texas), in cooperation with Levi Strauss and Company, is described. The partnership designed a three-part, job-specific, video-based curriculum in English as a Second Language (ESL) for garment industry workers, implemented in seven local plants. The 18-month program had these goals:…

  9. Present status and future plan of the research using HIMAC of NIRS

    International Nuclear Information System (INIS)

    Kawachi, Kiyomitsu

    1996-01-01

    The Heavy Ion Medical Accelerator in Chiba (HIMAC) was completed in 1993, and since June of 1994 heavy ion therapy has made a new start at this facility after closed-down of the BEVALAC accelerator at LBL in Berkeley, California in 1992. The HIMAC is also opened for the researchers of outside of NIRS as well as the clinical trial of the heavy ion therapy. In this report, I will describe on the present status of HIMAC facility, the beam characteristics and the future developments of HIMAC. (author)

  10. Towards new developments in uranium chemistry. Scientific report presented to obtain and Accreditation to Supervise Research

    International Nuclear Information System (INIS)

    Berthet, Jean-Claude

    2003-01-01

    After a presentation of his academic curriculum, the author proposes an overview of some of his main research activities and works which notably addressed the reactivity of uranium III complexes (synthesis and reactivity of uranium hydride complexes, synthesis of poly-metallic complexes), amide complexes (synthesis of uranium IV amide precursors, reactivity of cationic complexes, synthesis of uranium IV complexes), uranium triflate (or trifluoromethanesulfonate) complexes, the synthesis of U(Cot)X_2(L)_n complexes and of their derivatives, the complexing of lanthanide iodides and triflates

  11. Characteristics of Successful Internal Medicine Resident Research Projects: Predictors of Journal Publication Versus Abstract Presentation.

    Science.gov (United States)

    Atreya, Auras R; Stefan, Mihaela; Friderici, Jennifer L; Kleppel, Reva; Fitzgerald, Janice; Rothberg, Michael B

    2018-02-06

    To identify the characteristics of successful research projects at an internal medicine residency program with an established research curriculum. The authors collected data about all research projects initiated by or involving medicine residents from 2006 to 2013 at Baystate Medical Center, using departmental files and institutional review board applications. Resident and mentor characteristics were determined using personnel files and Medline searches. Using multivariable models, the authors identified predictors of successful completion of projects using adjusted prevalence ratios (PRs). The primary outcome was manuscript publication by resident and secondary outcome was either publication or regional/national presentation. Finally, residents were surveyed to identify barriers and/or factors contributing to project completion. Ninety-four research projects were identified: 52 (55.3%) projects achieved the primary outcome and 72 (76.5%) met the secondary outcome, with overlap between categories. Most study designs were cross-sectional (41, 43.6%) or retrospective cohort (30, 31.9%). After adjustment, utilization of the epidemiology/biostatistical core (PR = 2.09; 95% CI: 1.36, 3.21), established publication record of resident (PR = 1.54, 95% CI: 1.14, 2.07), and resident with U.S. medical education (PR = 1.39, 95% CI: 1.02, 1.90) were associated with successful completion of projects. Mentor publication record (PR = 3.13) did not retain significance due to small sample size. Most respondents (65%) cited "lack of time" as a major project barrier. Programs seeking to increase resident publications should consider an institutional epidemiology/biostatistical core available to all residency research projects, and residents should choose experienced mentors with a track record of publications.

  12. Bioimage Informatics in the context of Drosophila research.

    Science.gov (United States)

    Jug, Florian; Pietzsch, Tobias; Preibisch, Stephan; Tomancak, Pavel

    2014-06-15

    Modern biological research relies heavily on microscopic imaging. The advanced genetic toolkit of Drosophila makes it possible to label molecular and cellular components with unprecedented level of specificity necessitating the application of the most sophisticated imaging technologies. Imaging in Drosophila spans all scales from single molecules to the entire populations of adult organisms, from electron microscopy to live imaging of developmental processes. As the imaging approaches become more complex and ambitious, there is an increasing need for quantitative, computer-mediated image processing and analysis to make sense of the imagery. Bioimage Informatics is an emerging research field that covers all aspects of biological image analysis from data handling, through processing, to quantitative measurements, analysis and data presentation. Some of the most advanced, large scale projects, combining cutting edge imaging with complex bioimage informatics pipelines, are realized in the Drosophila research community. In this review, we discuss the current research in biological image analysis specifically relevant to the type of systems level image datasets that are uniquely available for the Drosophila model system. We focus on how state-of-the-art computer vision algorithms are impacting the ability of Drosophila researchers to analyze biological systems in space and time. We pay particular attention to how these algorithmic advances from computer science are made usable to practicing biologists through open source platforms and how biologists can themselves participate in their further development. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  13. Publication bias in animal research presented at the 2008 Society of Critical Care Medicine Conference.

    Science.gov (United States)

    Conradi, Una; Joffe, Ari R

    2017-07-07

    To determine a direct measure of publication bias by determining subsequent full-paper publication (P) of studies reported in animal research abstracts presented at an international conference (A). We selected 100 random (using a random-number generator) A from the 2008 Society of Critical Care Medicine Conference. Using a data collection form and study manual, we recorded methodology and result variables from A. We searched PubMed and EMBASE to June 2015, and DOAJ and Google Scholar to May 2017 to screen for subsequent P. Methodology and result variables were recorded from P to determine changes in reporting from A. Predictors of P were examined using Fisher's Exact Test. 62% (95% CI 52-71%) of studies described in A were subsequently P after a median 19 [IQR 9-33.3] months from conference presentation. Reporting of studies in A was of low quality: randomized 27% (the method of randomization and allocation concealment not described), blinded 0%, sample-size calculation stated 0%, specifying the primary outcome 26%, numbers given with denominators 6%, and stating number of animals used 47%. Only being an orally presented (vs. poster presented) A (14/16 vs. 48/84, p = 0.025) predicted P. Reporting of studies in P was of poor quality: randomized 39% (the method of randomization and allocation concealment not described), likely blinded 6%, primary outcome specified 5%, sample size calculation stated 0%, numbers given with denominators 34%, and number of animals used stated 56%. Changes in reporting from A to P occurred: from non-randomized to randomized 19%, from non-blinded to blinded 6%, from negative to positive outcomes 8%, from having to not having a stated primary outcome 16%, and from non-statistically to statistically significant findings 37%. Post-hoc, using publication data, P was predicted by having positive outcomes (published 62/62, unpublished 33/38; p = 0.003), or statistically significant results (published 58/62, unpublished 20/38; p < 0

  14. The Institute for Nuclear Research and Nuclear Energy - present state and future prospects

    International Nuclear Information System (INIS)

    Stamenov, J.

    2004-01-01

    The Institute for Nuclear Research and Nuclear Energy is the biggest one within Bulgarian Academy of Sciences and it is a leading complex center for research and application of the nuclear physics in Bulgaria. The year 2003 was the first for the functioning of the new organization structure of INRNE consisting of 26 laboratories and 4 scientific experimental bases joined according their thematic in 7 scientific directions governed by the correspondent Expert Councils and Specialised Seminars. The scientific staff of the Institute has been worked on about 104 problems during the 2003 mainly on our traditional scientific areas, in particular, in the field of: theory of the elementary particles, field theory, atomic nuclei and quantum phenomena; experimental physics of the elementary particles, nuclear reactions, structure of atomic nuclei, cosmic rays and gamma-astrophysics at ultra high energies; neutron interactions and cross sections, physics of the fission; reactor physics, nuclear energy and nuclear safety and security ect. Now the results are already present and, as can been seen, almost half of the developments are connected with the problems of scientific support of the national nuclear energy production, radioactive waste, monitoring and management of the environment. With few exceptions, all these tasks are financially supported by national, foreign and international organizations. The fundamental end applied research results for 2003 have been accepted for publication or published in more than 300 articles in journals and proceeding of many international conferences. Large amount of these results has been obtained in close collaboration with international and foreign research centers, universities and institutions. Essential progress was obtained by the modernization of the scientific experimental bases of INRNE. The technical design project for the reconstruction of the old research reactor IRT 2000 in the new IRT 200 was successfully finished. The

  15. Armstrong Flight Research Center Research Technology and Engineering 2017

    Science.gov (United States)

    Voracek, David F. (Editor)

    2018-01-01

    I am delighted to present this report of accomplishments at NASA's Armstrong Flight Research Center. Our dedicated innovators possess a wealth of performance, safety, and technical capabilities spanning a wide variety of research areas involving aircraft, electronic sensors, instrumentation, environmental and earth science, celestial observations, and much more. They not only perform tasks necessary to safely and successfully accomplish Armstrong's flight research and test missions but also support NASA missions across the entire Agency. Armstrong's project teams have successfully accomplished many of the nation's most complex flight research projects by crafting creative solutions that advance emerging technologies from concept development and experimental formulation to final testing. We are developing and refining technologies for ultra-efficient aircraft, electric propulsion vehicles, a low boom flight demonstrator, air launch systems, and experimental x-planes, to name a few. Additionally, with our unique location and airborne research laboratories, we are testing and validating new research concepts. Summaries of each project highlighting key results and benefits of the effort are provided in the following pages. Technology areas for the projects include electric propulsion, vehicle efficiency, supersonics, space and hypersonics, autonomous systems, flight and ground experimental test technologies, and much more. Additional technical information is available in the appendix, as well as contact information for the Principal Investigator of each project. I am proud of the work we do here at Armstrong and am pleased to share these details with you. We welcome opportunities for partnership and collaboration, so please contact us to learn more about these cutting-edge innovations and how they might align with your needs.

  16. Present status of TMI-2 plant and results of its research

    International Nuclear Information System (INIS)

    Sasaki, Sadaaki; Yokomi, Michiro.

    1987-01-01

    In the accident occurred in the TMI-2 plant on March 28, 1979, the damage was caused in the reactor core, but there scarcely was the effect on the health and safety of general public around the power station. But in USA, it was decided to collect the data on the fuel, decontamination, waste management and so on of this plant and to advance the survey and research on the safety by the analysis and evaluation of the course of the accident mainly by GPUN, EPRI, NRC and DOE. Also in Japan, it was judged that the participation in this research would be useful for improving the reliability of Japanese nuclear power plants hereafter, and the Japan-USA agreement on TMI-2 research and development project was concluded on April 16, 1984. The activity plan in TMI-2 is divided into three stages. Phase 1 is the stage of stabilization, Phase 2 is the stage of taking fuel out, and Phase 3 is the stage of cleaning. At present, Phase 2 - 3 are in progress, and the taking-out and transport of fuel and decontamination are carried out. After finishing Phase 3, the TMI-2 plant is placed in the state of monitoring and preservation, which is scheduled in September, 1988. The final disposal of the plant will be determined thereafter. Decontamination, treatment of contaminated water and wastes, taking-out and transport of fuel, state of the reactor core and others are reported. (Kako, I.)

  17. Present state of the monitoring for internal contamination at Tokai Research Establishment, Japan Atomic Energy Research Institute

    International Nuclear Information System (INIS)

    Akaishi, J.; Fukuda, H.; Mizushita, S.

    1980-01-01

    Results are presented of internal contamination surveys carried out since 1969 at Tokai Research Establishment. Routine monitoring sometimes revealed significant internal contamination for tritium workers, but almost never for others. The number of subjects for special monitoring varied according to the activities. In 1965, the number of subjects for special monitoring was nearly 300, due to a reactor repair that year. In recent years, the number or special monitoring has been several tens or so. With regard to special monitoring, the workers with significant internal contamination were less than 50%. The internal dose (50 years) estimated for the majority of subjects was of mrem order. During the past 15 years, only several cases of exposure of rem order were found. The highest dose experienced was about 4 rems ( 131 I thyroid) (U.K.)

  18. Accelerators for research and applications

    International Nuclear Information System (INIS)

    Alonso, J.R.

    1990-06-01

    The newest particle accelerators are almost always built for extending the frontiers of research, at the cutting edge of science and technology. Once these machines are operating and these technologies mature, new applications are always found, many of which touch our lives in profound ways. The evolution of accelerator technologies will be discussed, with descriptions of accelerator types and characteristics. The wide range of applications of accelerators will be discussed, in fields such as nuclear science, medicine, astrophysics and space-sciences, power generation, airport security, materials processing and microcircuit fabrication. 13 figs

  19. Nanotechnology on a dime: building affordable research facilities

    Science.gov (United States)

    DiBattista, Jeff; Clare, Donna; Lynch, David

    2005-08-01

    Designing buildings to house nanotechnology research presents a multitude of well-recognized challenges to architectural and engineering design teams, from environmental control to spatial arrangements to operational functionality. These technical challenges can be solved with relative ease on projects with large budgets: designers have the option of selecting leading-edge systems without undue regard for their expense. This is reflected in the construction cost of many nanotechnology research facilities that run well into the hundreds of millions of dollars. Smaller universities and other institutions need not be shut out of the nanotechnology research field simply because their construction budgets are tens of millions of dollars or less. The key to success for these less expensive projects lies with making good strategic decisions: identifying priorities for the facility in terms of what it will is--and will not--provide to the researchers. Making these strategic decisions puts bounds on the tactical, technical problems that the design team at large must address, allowing them to focus their efforts on the key areas for success. The process and challenges of this strategic decision-making process are examined, with emphasis placed on the types of decisions that must be made and the factors that must be considered when making them. Case study examples of projects undertaken at the University of Alberta are used to illustrate how strategic-level decision-making sets the stage for cutting-edge success on a modest budget.

  20. Papers presented at the fourteenth international conference on plasma physics and controlled nuclear fusion research

    International Nuclear Information System (INIS)

    1994-01-01

    This report contains the contributions of the CIEMAT's Fusion Unit to the 14th International Conference on Plasma Physics and Controlled Nuclear Fusion Research that was held by the International Atomic Energy Agency in Wurzburg, Germany from 30 September to 7 October 1992. Three papers were presented that summarized the main lines of work done in the Unit during the previous two years: The first one on the theoretical advances in the understanding of the Flexible Heliac TJ-II under construction, the second on the confinement studies performed in the operating TJ-I Tokamak and the third one on the description of the physical properties of the soon to be started TJ-IU Torsatron. (Author) 25 refs

  1. Presentation of the RESSAC research program (REhabilitation of Soils and Surfaces after an ACcident)

    International Nuclear Information System (INIS)

    L'Homme, A.; Parmentier, N.; Legrand, B.; Fache, P.

    1992-01-01

    If, despite all the precautions taken in nuclear power plants, a severe accident were to occur in France involving extensive release of radioactive materials to the environment, existing emergency plans would be implemented enabling urgent decisions to be made with regard to the immediate protection of the population: confinement indoors, evacuation, distribution of stable iodine, etc. But, at a later stage, mean and long term actions would have to be carried out to decontaminate the polluted areas and limit subsequent contamination of the food chain, with a view to enabling the populations concerned to return to normal life. These actions would concern, in decreasing order of priority and using the WHO and IAEA definitions, the near field, closest to the accident site, and the far field, subjected to the direct impact of fallout. They should be aimed at reducing external exposure due to deposition and internal exposure by inhalation of radioactive products re-suspended in the atmosphere and by ingestion of products for human consumption. In the context of IPSN research and development programs on severe accidents, the RESSAC program was defined in 1985 for the purpose of studying methods and means of rehabilitating the near field and controlling problems related to the far field. Elaboration of the program is presently proceeding at the Nuclear Research Center of Cadarache, focussed on the following main topics: assessment of what happens to the radionuclides deposited on the soil and vegetation, determination of priorities and how to intervene, management of the waste produced. (author). 4 refs

  2. Present status of research on hydrogen energy and perspective of HTGR hydrogen production system

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, Yoshiaki; Ogawa, Masuro; Akino, Norio [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment] [and others

    2001-03-01

    A study was performed to make a clear positioning of research and development on hydrogen production systems with a High Temperature Gas-cooled Reactor (HTGR) under currently promoting at the Japan Atomic Energy Research Institute through a grasp of the present status of hydrogen energy, focussing on its production and utilization as an energy in future. The study made clear that introduction of safe distance concept for hydrogen fire and explosion was practicable for a HTGR hydrogen production system, including hydrogen properties and need to provide regulations applying to handle hydrogen. And also generalization of hydrogen production processes showed technical issues of the HTGR system. Hydrogen with HTGR was competitive to one with fossil fired system due to evaluation of production cost. Hydrogen is expected to be used as promising fuel of fuel cell cars in future. In addition, the study indicated that there were a large amount of energy demand alternative to high efficiency power generation and fossil fuel with nuclear energy through the structure of energy demand and supply in Japan. Assuming that hydrogen with HTGR meets all demand of fuel cell cars, an estimation would show introduction of the maximum number of about 30 HTGRs with capacity of 100 MWt from 2020 to 2030. (author)

  3. History of bystander effects research 1905-present; what is in a name?

    Science.gov (United States)

    Mothersill, Carmel; Rusin, Andrej; Fernandez-Palomo, Cristian; Seymour, Colin

    2017-11-29

    This review, which arose from a Radiation Research Society History symposium, traces the history of 'bystander effects' or 'indirect effects'(also known as 'abscopal effects', 'clastogenic effects' and more recently 'the secretosome'). In 1905, Murphy first drew attention to effects caused by the injection of irradiated cells into animals. In the present day, bystander effects are seen as part of the secretosome, where they coordinate responses to stressors at the tissue, organism, and population level. The review considers the history and also the reasons why this process of information exchange/communication appears to have been discovered and forgotten several times. The review then considers the evolution of our understanding of the mechanisms and what relevance these effects may have in radiation protection and radiotherapy. The authors conclude that the phenomenon currently described as a 'bystander effect' has been described under a variety of different names since 1905. However recent advances in biology have made it possible to investigate mechanisms and potential impacts more fully. This has led to the current upsurge in research into this effect of radiation.

  4. Present status of tandem accelerator in Japan Atomic Energy Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Tadashi; Kanda, Susumu; Takeuchi, Suehiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1996-12-01

    The tandem accelerator in Japan Atomic Energy Research Institute was made by NEC in USA. Since it is the accelerator of turning-up structure, it has large magnet at the high voltage terminal, and supplies electric power by driving a generator with large diameter shaft. The control is carried out by CAMUCK, and the electronic circuit is protected from the surging arising due to discharge. Since the experiment on full scale was begun, 14 years have elapsed, and at present, it became a very stable accelerator. As to the operation mode, the acceleration voltage is limited to below 17 MV. The operation voltage and the state of operation are shown. Recently, the troubles of chains originating in oil have occurred. The adjustment of the tandem accelerator requires more than one month. The adjustment is mainly related to the chains and shafts, and this is explained. The ion source used for the tandem accelerator at present is the negative ion source made by NEC. The installation of an ECR ion source is planned. The utilization of the tandem accelerator system is reported. (K.I.)

  5. Presentation of the ressac research program (rehabilitation of soils and surfaces after an accident)

    International Nuclear Information System (INIS)

    L'Homme, A.

    1989-11-01

    If, despite all the precautions taken in nuclear power plants, a severe accident was to occur in France involving extensive release of radioactive materials to the environment, existing emergency plans would be implemented enabling urgent decisions to be made with regard to the immediate protection of the population: confinement indoors, evacuation, distribution of stable iodine, etc. But, at a later stage, mean and long term actions would have to be carried out to decontaminate the polluted areas and limit subsequent contamination of the food chain, with a view to enabling the populations concerned to return to normal life. These actions would concern, in decreasing order of priority and using the WHO and IAEA definitions, the near field, closest to the accident site, and the far field, subjected to the direct impact of fallout. They should be aimed at reducing external exposure due to deposition and internal exposure by inhalation of radioactive products re-suspended in the atmosphere and by ingestion of products for human consumption. In the context of IPSN (Institute of Protection and Nuclear Safety) research and development programs on severe accidents, the RESSAC program was defined in 1985 for the purpose of studying methods and means of rehabilitating the near field and controlling problems related to the far field. Elaboration of the program is presently proceeding at the Nuclear Research Center of CADARACHE, focussed on the following main topics: assessment of what happens to the radionuclides deposited on the soil and vegetation, determination of priorities and how to intervene, management of the waste produced

  6. Past, present and future of cyanide antagonism research: From the early remedies to the current therapies.

    Science.gov (United States)

    Petrikovics, Ilona; Budai, Marianna; Kovacs, Kristof; Thompson, David E

    2015-06-26

    This paper reviews milestones in antidotal therapies for cyanide (CN) spanning early remedies, current antidotal systems and research towards next generation therapies. CN has been a part of plant defense mechanisms for millions of years. It became industrially important in the nineteenth century with the advent of CN assisted gold mining and the use of CN as a pest control agent. The biochemical basis of CN poisoning was actively studied and key mechanisms were understood as early as 1929. These fundamental studies led to a variety of antidotes, including indirect CN binders that generate methemoglobin, direct CN binders such as hydroxocobalamin, and sulfur donors that convert CN to the less toxic thiocyanate. Research on blood gases at the end of the twentieth century shed new light on the role of nitric oxide (NO) in the body. The discovery of NO's ability to compete with CN for enzymatic binding sites provided a previously missed explanation for the rapid efficacy of NO generating antidotes such as the nitrites. Presently used CN therapies include: methemoglobin/NO generators (e.g., sodium nitrite, amyl nitrite, and dimethyl aminophenol), sulfur donors (e.g., sodium thiosulfate and glutathione), and direct binding agents [(e.g., hydroxocobalamin and dicobalt salt of ethylenediaminetetraacetic acid (dicobalt edetate)]. A strong effort is being made to explore novel antidotal systems and to formulate them for rapid administration at the point of intoxication in mass casualty scenarios. New antidotes, formulations, and delivery systems are enhancing bioavailability and efficacy and hold promise for a new generation of improved CN countermeasures.

  7. Clinical presentation of pediatric autoimmune neuropsychiatric disorders associated with streptococcal infections in research and community settings.

    Science.gov (United States)

    Swedo, Susan E; Seidlitz, Jakob; Kovacevic, Miro; Latimer, M Elizabeth; Hommer, Rebecca; Lougee, Lorraine; Grant, Paul

    2015-02-01

    The first cases of pediatric autoimmune neuropsychiatric disorders associated with streptococcal infections (PANDAS) were described >15 years ago. Since that time, the literature has been divided between studies that successfully demonstrate an etiologic relationship between Group A streptococcal (GAS) infections and childhood-onset obsessive-compulsive disorder (OCD), and those that fail to find an association. One possible explanation for the conflicting reports is that the diagnostic criteria proposed for PANDAS are not specific enough to describe a unique and homogeneous cohort of patients. To evaluate the validity of the PANDAS criteria, we compared clinical characteristics of PANDAS patients identified in two community practices with a sample of children meeting full research criteria for PANDAS. A systematic review of clinical records was used to identify the presence or absence of selected symptoms in children evaluated for PANDAS by physicians in Hinsdale, Illinois (n=52) and Bethesda, Maryland (n=40). RESULTS were compared against data from participants in National Institute of Mental Health (NIMH) research investigations of PANDAS (n=48). As described in the original PANDAS cohort, males outnumbered females (95:45) by ∼ 2:1, and symptoms began in early childhood (7.3±2.7 years). Clinical presentations were remarkably similar across sites, with all children reporting acute onset of OCD symptoms and multiple comorbidities, including separation anxiety (86-92%), school issues (75-81%), sleep disruptions (71%), tics (60-65%), urinary symptoms (42-81%), and others. Twenty of the community cases (22%) failed to meet PANDAS criteria because of an absence of documentation of GAS infections. The diagnostic criteria for PANDAS can be used by clinicians to accurately identify patients with common clinical features and shared etiology of symptoms. Although difficulties in documenting an association between GAS infection and symptom onset/exacerbations may

  8. Estimation of the future nuclear power research in Romania, based on the present Cernavoda NPP evolution

    International Nuclear Information System (INIS)

    Dumitrache, Ion

    2001-01-01

    For more than four decades, the electric power needs of Romania were evaluated on the basis of the State Plan for Economic Development. To identify the optimal solution, the 'least price per produced MWh' was practically the only criterion. Now, there is no convincing estimation of the future economic development and at least two additional criteria play a significant role, 'the safety in the supply of the needed electric power', and 'the need of limiting the environmental impact of electricity generation'. The analysis dedicated to evaluation of future electric power solutions must take into account several features of the present situation. There are no available internal funds to finance the construction of new generating units of the order of several hundreds of MW. Even the so-called 'refurbishing' of the existing thermal power plants is based on foreign loan. In the 2000 year, about 80 electricity generation units reached 30 years of operation, i.e., the design life. Other thermal power plants proved very modest performances during 15-20 years of operation. Consequently, the future of almost 100 generating units is either in shutdown + decommissioning or shutdown + modernization situation. The Government analyzed the situation and decided to continue the completion of the Cernavoda NPP. The Unit 2 will be commissioned in a couple of years, and there is a schedule of negotiations relating the future of the Unit 3. After almost five years of successful operation of the Unit 1, the collaboration between RDT Institutes and NPP has clear features. Based on the experience related to this collaboration and taking into account the evolution of the Cernavoda NPP, we estimated that five research domains have significant chances to obtain a stable (and, hopefully, consistent) financial support. 1. Nuclear Safety, in particular Accident Analysis. As the Government re-iterated the firm decision to meet the conditions required for European integration, most of the nuclear

  9. Directional backlight liquid crystal autostereoscopic display: technical challenges, research progress, and prospect (Conference Presentation)

    Science.gov (United States)

    Fan, Hang; Li, Kunyang; Zhou, Yangui; Liang, Haowen; Wang, Jiahui; Zhou, Jianying

    2016-09-01

    Recent upsurge on virtual and augmented realities (VR and AR) has re-ignited the interest to the immerse display technology. The VR/AR technology based on stereoscopic display is believed in its early stage as glasses-free, or autostereoscopic display, will be ultimately adopted for the viewing convenience, visual comfort and for the multi-viewer purposes. On the other hand, autostereoscopic display has not yet received positive market response for the past years neither with stereoscopic displays using shutter or polarized glasses. We shall present the analysis on the real-world applications, rigid user demand, the drawbacks to the existing barrier- and lenticular lens-based LCD autostereoscopy. We shall emphasize the emerging autostereoscopic display, and notably on directional backlight LCD technology using a hybrid spatial- and temporal-control scenario. We report the numerical simulation of a display system using Monte-Carlo ray-tracing method with the human retina as the real image receiver. The system performance is optimized using newly developed figure of merit for system design. The reduced crosstalk in an autostereoscopic system, the enhanced display quality, including the high resolution received by the retina, the display homogeneity without Moiré- and defect-pattern, will be highlighted. Recent research progress including a novel scheme for diffraction-free backlight illumination, the expanded viewing zone for autostereoscopic display, and the novel Fresnel lens array to achieve a near perfect display in 2D/3D mode will be introduced. The experimental demonstration will be presented to the autostereoscopic display with the highest resolution, low crosstalk, Moiré- and defect- pattern free.

  10. RESEARCH OF THE MAIN FORMS OF REFINANCING OF RECEIVABLES OF THE ENTERPRISES AT THE PRESENT STAGE

    Directory of Open Access Journals (Sweden)

    I. V. Sukhomlin

    2014-04-01

    Full Text Available In article modern forms of refinancing of receivables for management of enterprise mutual settlements are investigated, namely: factoring, the accounting of the bills issued by buyers of production, forfeyting, the commercial credit. Advantages of the enterprises are defined at application of factoring operations. Characteristic signs of a forfeyting are defined, its advantages are analysed. Expediency of introduction of the commercial credit on the basis of circulation of bills is analysed.Purpose. To investigate modern forms of refinancing of receivables and to consider possibility of their use at the enterprise. To analyse influence of factoring operations on activity of the enterprises. To define expediency of introduction of the commercial credit on the basis of circulation of bills.Method or methodology of carrying out work. Work is performed by results of research of modern domestic and foreign views on advantages of use of the main forms of refinancing of receivables of the enterprises as means of increase of solvency at the present stage.Results. The main forms of refinancing of receivables, including such as are investigated: factoring, forfeyting, commercial credit. Advantages of the enterprises are defined at application of factoring operations. Characteristic signs of a forfeyting are considered, its advantages are analysed. Expediency of introduction of the commercial credit on the basis of circulation of bills is defined.Scope of results. The recommendations offered in article can be used by the enterprises of Ukraine of all forms of ownership for solvency increase at the present stage.Purchase on Elibrary.ru > Buy now

  11. NITARP: Bridging the Gap Between the Traditional Science Classroom and Authentic Research

    Science.gov (United States)

    Stalnaker, Olivia K.; Evans, Sam; Rutherford, Thomas; Taylor, John; Rebull, Luisa

    2018-01-01

    In this poster, the differences between what occurs in the traditional secondary science classroom and what happens in the actual research world is examined. Secondary classroom teachers generally have limited, if any, research experience beyond what is presented through their undergraduate college lab coursework. A disparity exists between classroom laboratory work and professional research. Opportunities like NITARP provide research elements that bridge this gap. NITARP teams are in a unique situation, joining a small team working alongside Caltech researchers on cutting edge investigations in astrophysics. In this poster it is shown how the NITARP program provides key components and experiences to expand the skill sets that teachers bring to their classrooms, bridging the gap between the typical secondary classroom and the world of the professional researcher. The NASA/IPAC program immerses participating teachers into a year-long training experience via online and face-to-face learning that translates into enhanced instruction at the secondary level. This work was made possible through the NASA/IPAC Teacher Archive Research Program (NITARP) and was funded by NASA Astrophysics Data Program.

  12. High Temperature Versus Geomechanical Parameters of Selected Rocks – The Present State of Research

    Directory of Open Access Journals (Sweden)

    Anna Sygała

    2013-01-01

    Full Text Available This paper presents the current state of knowledge concerning the examination of the impact of increased temperatures on changes of geomechanical properties of rocks. Based on historical data, the shape of stress–strain characteristics that illustrate the process of the destruction of rock samples as a result of load impact under uniaxial compression in a testing machine, were discussed. The results from the studies on changes in the basic strength and elasticity parameters of rocks, such as the compressive strength and Young’s modulus were compared. On their basis, it was found that temperature has a significant effect on the change of geomechanical properties of rocks. The nature of these changes also depends on other factors (apart from temperature. They are, among others: the mineral composition of rock, the porosity and density. The research analysis showed that changes in the rock by heating it at various temperatures and then uniaxially loading it in a testing machine, are different for different rock types. Most of the important processes that cause changes in the values of the strength parameters of the examined rocks occured in the temperature range of 400 to 600 °C.

  13. A RESEARCH ON PRESENTATION OF VIOLENCE IN SOCIAL MEDIA: OPINIONS OF FACEBOOK USERS

    Directory of Open Access Journals (Sweden)

    Gulsum Calisir

    2016-01-01

    Full Text Available Element of violence which was seen almost every day in all media but in no way could be prevented is reflecting a bitter side of life. Today that we called age of information, technology rapidly improved, and thanks to this there found solutions for a lot of matters, we are unfortunately are living violence more heavy day by day. Consequently, elements of violence lived are taking part in television and computer screens, and magazine and newspaper pages. Although it is an un approved and unwanted matter of fact, violence’s existing in life is keeping this phenomenon fresh in media’s agenda. It is known that there executed researches and studies about in what direction violence was presented in almost all units of media organs. In this study, how violence was used on Facebook that was used especially among young ones in last ten years and had high popularity had been searched. With this aim, a focus group study had been executed in November 2015 on university students. Information that representation of violence was done over Facebook had been obtained in the study. Violence done over Facebook is conceiving alienation, polarization and hate together with itself. As a consequence, shares done through Facebook can last with very close friends’ erasing each other from their personal Facebook pages in time, and this situation is called as violence.

  14. Present status of Kyoto University reactor research result data base KURRIP

    International Nuclear Information System (INIS)

    Takeuchi, Takayuki

    1986-01-01

    The construction of KURRIP data base was begun in 1982, and in 1983, the data base concerning the literatures published in five years from 1978 to 1982 was set up in the Kyoto University Large Computer Center, and it has become available generally. In fiscal year 1984, the data concerning the literatures published from 1974 to 1977 and in 1983 were added. Moreover in this fiscal year, the work is carried out to input the data concerning the literatures published from 1970 to 1973 and in 1984. The data retrievable at present are those for ten years from 1974 to 1983. The results of having retrieved these data about a number of items are reported in this paper. The classification according to the places of employment of authors, the classification according to the kinds of literatures, the classification according to the languages used, the classification according to the installations used, the classification according to the fields of research, and the classification according to the magazines which printed the data are reported. (Kako, I.)

  15. Are We (T)here Yet? Qualitative Research in Education's Profuse and Contested Present

    Science.gov (United States)

    Wright, Handel Kashope

    2006-01-01

    This essay addresses the topic of the state of qualitative research in education by asserting that qualitative research in education is in quite a state. Drawing heavily on Denzin and Lincoln's periodization of qualitative research as a guide, it outlines the various competing developments from within and outside that are vying to characterize the…

  16. The Past, Present, and Future of Research in Distance Education: Results of a Content Analysis

    Science.gov (United States)

    Lee, Youngmin; Driscoll, Marcy P.; Nelson, David W.

    2005-01-01

    The articles published in four prominent distance education journals between 1997 and 2002 were categorized and the references cited were tallied. The study provides an opportunity to examine research topics, methods, and citation trends. The results can be used to review current research trends and to explore potential research directions.…

  17. A re-appraisal of publication rates of scientific papers presented at the Otorhinolaryngology Research Society meetings.

    Science.gov (United States)

    Lau, A S; Krishnan, M; Williams, S P; Mamais, C; Sweed, A; Bhat, J; Somashekar, S; Leong, S C

    2016-12-01

    To review the rate of publication of papers in peer-reviewed journals after oral presentations at the Otorhinolaryngology Research Society meetings between 1996 and 2013 and to compare trends with the previous review (1979-1995). Literature review. Merseyside ENT Research Collaborative. The abstracts of presentations at Otorhinolaryngology Research Society meetings are published in Clinical Otolaryngology. A structured search of PubMed was undertaken to identify published Otorhinolaryngology Research Society presentations. Publication rates. A total of 460 abstracts were identified. The interobserver reliability among reviewers was 98%. Of the total, 259 (56.3%) abstracts were published in peer-reviewed journals. The average time from Otorhinolaryngology Research Society presentation to publication was 27.7 months (median 23), which was not significantly different from the previous review. Publication by subspeciality was as follows: head and neck (45.6%), otology (30.5%), rhinology (22%) and others (1.9%). Most published Otorhinolaryngology Research Society presentations were published in Clinical Otolaryngology (22.4%), followed by the Journal of Laryngology and Otology (8.1%) and the Laryngoscope (7.3%). Clinical research was the most common category of abstracts being presented at Otorhinolaryngology Research Society meetings, followed by laboratory-based research. Over half (56.5%) of laboratory research presented were head and neck themed, while otology and rhinology predominated clinical research presentations. Over half (52.1%) of Otorhinolaryngology Research Society abstracts originated from units in the North of England. Bristol presented the most abstracts (30.1%), followed by Newcastle (25.1%). The publication rate of Otorhinolaryngology Research Society presentations remains high and many are subsequently published in high-impact factor otolaryngology journals. More Otorhinolaryngology Research Society presentations are now published in American and

  18. Accounting Research: a Critical View of the Present Situation and Prospects

    Directory of Open Access Journals (Sweden)

    Josep Garcia-Blandon

    2011-12-01

    Full Text Available In this study we critically review the internal procedures of the accounting community for generating and disseminating knowledge. We contend that academic journals on accounting research are scarce, publish few articles and apply high rejection rates, and the review process is lengthy and expensive. Additionally, an academic elite has unparalleled predominance in comparison to other business disciplines, reflected in an unusual share of published articles with authors affiliated to a small number of academic institutions, and the predominance of certain topics and methodologies. The discipline does not allow the collaborative, iterative and flexible features of innovative knowledge communities. The discipline’s internal procedures favour restriction, control, slowness, and expiration, rather than participation, speed and renewal. They are ill suited for advancing knowledge and bode badly for successful research. As a result, accounting academics present low research performance and the discipline is facing steady decline. More importantly, the discipline is handicapped in producing innovative knowledge able to contribute to critical research and long term social well-being.We also focus on the Spanish institutional situation, arguing that Spanish requirements for reaching tenured positions are difficult for accountants to meet.We highlight the need to raise awareness of the problem and change the procedures.En este estudio hacemos una revisión crítica de los procedimientos vigentes en la comunidad académica contable para la generación de conocimiento y su publicación. Exponemos que hay pocas revistas académicas para publicar la investigación contable, que éstas publican pocos artículos, aplican elevadas tasas de rechazo y el proceso de revisión es lento y costoso. Además, hay un predominio de una elite académica sin precedentes en otras disciplinas de empresa, lo cual se refleja en un mayor porcentaje de artículos pertenecientes

  19. Studies in Teaching. 1995 Research Digest. Papers Presented at the Annual Research Forum (Winston-Salem, North Carolina, December 1995).

    Science.gov (United States)

    McCoy, Leah P., Ed.

    This is a collection of papers reporting student research projects at the Annual Research Forum, Department of Education, Wake Forest University (North Carolina). They include: "Student Interest in Studying World History in Relation to Current Events" (Conan Arthur); "Perceptions of High School Student Athletes and Athletics"…

  20. Product-services as a research field: past, present and future. Reflections from a decade of research

    NARCIS (Netherlands)

    Tukker, A.; Tischner, U.

    2006-01-01

    In the last decade many researchers, institutes and programs in the EU paid attention to product-service systems (PSS). Given this massive effort, it is time to take stock. Is PSS research a theoretical field in its own right? Is the PSS concept indeed the road to the Factor 10 world? Is it the road

  1. Present status and future plans of the National Atomic Research Center of Malaysia

    International Nuclear Information System (INIS)

    Rashid, N.K.

    1980-01-01

    The Malaysian Atomic Research Center (PUSPATI) was established in 1972 and operates under the Ministry of Science, Technology and the Environment. It is the first research center of this kind in Malaysia. Some of the objectives of this center are: operation and maintenance of the research reactor; research and development in reactor science and technology; production of short-lived radioisotopes for use in medicine, agriculture and industry; coordination of the utilization of the reactor and its experimental facilities among the various research institutes and universities; training in nuclear radiation field; personnel monitoring and environmental surveillance

  2. Clinical Presentation of Pediatric Autoimmune Neuropsychiatric Disorders Associated with Streptococcal infections in Research and Community Settings

    Science.gov (United States)

    Seidlitz, Jakob; Kovacevic, Miro; Latimer, M. Elizabeth; Hommer, Rebecca; Lougee, Lorraine; Grant, Paul

    2015-01-01

    Abstract Background: The first cases of pediatric autoimmune neuropsychiatric disorders associated with streptococcal infections (PANDAS) were described>15 years ago. Since that time, the literature has been divided between studies that successfully demonstrate an etiologic relationship between Group A streptococcal (GAS) infections and childhood-onset obsessive-compulsive disorder (OCD), and those that fail to find an association. One possible explanation for the conflicting reports is that the diagnostic criteria proposed for PANDAS are not specific enough to describe a unique and homogeneous cohort of patients. To evaluate the validity of the PANDAS criteria, we compared clinical characteristics of PANDAS patients identified in two community practices with a sample of children meeting full research criteria for PANDAS. Methods: A systematic review of clinical records was used to identify the presence or absence of selected symptoms in children evaluated for PANDAS by physicians in Hinsdale, Illinois (n=52) and Bethesda, Maryland (n=40). Results were compared against data from participants in National Institute of Mental Health (NIMH) research investigations of PANDAS (n=48). Results: As described in the original PANDAS cohort, males outnumbered females (95:45) by ∼ 2:1, and symptoms began in early childhood (7.3±2.7 years). Clinical presentations were remarkably similar across sites, with all children reporting acute onset of OCD symptoms and multiple comorbidities, including separation anxiety (86–92%), school issues (75–81%), sleep disruptions (71%), tics (60–65%), urinary symptoms (42–81%), and others. Twenty of the community cases (22%) failed to meet PANDAS criteria because of an absence of documentation of GAS infections. Conclusions: The diagnostic criteria for PANDAS can be used by clinicians to accurately identify patients with common clinical features and shared etiology of symptoms. Although difficulties in documenting an association

  3. Collective Variables in Apphed Linguistics Research

    OpenAIRE

    ヘンスリー, ジョール; HENSLEY, Joel

    2011-01-01

    This paper focuses on the key dynamic(al)systems theory concept of collective variables as it relates to developmental research in applied linguistics. Dynamic(al) systems theory is becoming prevalent in linguistic research and in the past two decades has jumped to the forefront of cutting edge in the field. One key concept in dynamic(al) systems theory is that of collective variables. In order to help properly orient this concept in the field of applied linguistics, this paper discusses the ...

  4. 2009 Gordon Research Conference, Applied and Environmental Microbiology

    Energy Technology Data Exchange (ETDEWEB)

    Dubilier, Nicole [Max Planck Inst. for Marine Microbiology, Bremen (Germany)

    2009-07-12

    The topic of the 2009 Gordon Conference on Applied and Environmental Microbiology is: From Single Cells to the Environment. The Conference will present and discuss cutting-edge research on applied and environmental microbiology with a focus on understanding interactions between microorganisms and the environment at levels ranging from single cells to complex communities. The Conference will feature a wide range of topics such as single cell techniques (including genomics, imaging, and NanoSIMS), microbial diversity at scales ranging from clonal to global, environmental 'meta-omics', biodegradation and bioremediation, metal - microbe interactions, animal microbiomes and symbioses. The Conference will bring together investigators who are at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present their work in poster format and exchange ideas with leaders in the field. Some poster presenters will be selected for short talks. The collegial atmosphere of this Conference, with extensive discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an ideal setting for scientists from different disciplines to exchange ideas, brainstorm and discuss cross-disciplinary collaborations.

  5. Children's Rights, Educational Research and the UNCRC: Past, Present and Future

    Science.gov (United States)

    Gillett-Swan, Jenna, Ed.; Coppock, Vicki, ED.

    2016-01-01

    "Children's Rights, Educational Research, and the UNCRC" provides international perspectives on contemporary issues pertaining to children's rights in education. The global context, relevance and implications of children's rights, educational research and the United Nations Convention on the Rights of the Child (UNCRC) are explored from…

  6. Researching Classroom Interaction in the light of social justice. : [paper presentation

    NARCIS (Netherlands)

    Nicolina Montesano-Montessori; Prof.Dr. Petra Ponte

    2010-01-01

    A research into classroom interaction (behaviour and communication) between teachers and pupils in the light of social justice. The research is based on the concern that educational praxis, defined as 'practice which implies a conscious awareness of the practitioners that their actions are morally

  7. Present condition of survey research on actualization strategy of fast breeding reactor (FBR) cycling. General outlines on the research

    International Nuclear Information System (INIS)

    Hara, Hideaki

    2001-01-01

    The Japan Nuclear Cycle Development Institute (JNC) started the survey research on actualization strategy of FBR cycling under cooperation of related organizations such as electric business company and so on, on July, 1999. The research aims at preparation of technical system to establish the FBR cycling for a future main energy supply source by extracting an actualization picture maximum activated advantages originally haven by the FBR cycling and by proposing a developmental strategy flexibly responsible to diverse needs in future society. Here was reported on effort state of its phase 1 (two years between 1999 and 2000 fiscal years). In the phase 1, it was planned to perform research and development shown as follows: 1) Extraction of actualization candidate concept on the FBR cycling under a premise of safety security and a viewpoint of evaluation on economics, resource effective usage, environmental loading reduction, and nuclear dispersion resistance by conducting investigation and evaluation of wide technical choices adopting innovative techniques, and 2) Embodiment of a research and development program of phase 2 (from 2001 to 2005 fiscal years) by investigating some technical subjects important for selection of research and development program aiming at actualization and its candidate concept on the FBR cycling. (G.K.)

  8. 2010 ELECTRODEPOSITION GORDON RESEARCH CONFERENCE, AUGUST 1-6, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Peter Searson

    2010-08-06

    The 2010 Gordon Conference on Electrodeposition will present cutting-edge research on electrodeposition with emphasis on (i) advances in basic science, (ii) developments in next-generation technologies, and (iii) new and emerging areas. The Conference will feature a wide range of topics, from atomic scale processes, nucleation and growth, thin film deposition, and electrocrystallization, to applications of electrodeposition in devices including microelectronics, solar energy, and power sources. The Conference will bring together investigators from a wide range of scientific disciplines, including chemical engineering, materials science and engineering, physics, and chemistry. The Conference will feature invited speakers at the forefront of the field, and a late-breaking news session that will provide the opportunity for graduate students, post-docs, and junior faculty to participate. The collegial atmosphere of this Conference, with scientific talks and poster sessions, as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to discuss current issues and promotes cross-disciplinary collaborations in the various research areas represented. The Conference will be held at Colby-Sawyer College, located in the Mt. Kearsarge-Lake Sunapee Region of New Hampshire. The surrounding mountains, forests, and lakes provide a beautiful setting for this conference. The attendance is limited so early application is strongly advised.

  9. Microbial transformation of coal and coal relevant structures - presentation of a BMBF joint research project

    Energy Technology Data Exchange (ETDEWEB)

    Sinder, C.; Schacht, S.; Pfeifer, F.; Klein, J. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

    1997-12-31

    Investigations in the joint research project `Microbial transformation of coal and coal relevant structures` supported by the Ministry of Education, Science, Research and Technology (BMBF) of the Federal Republic of Germany and coordinated by the DMT-Gesellschaft fuer Forschung und Pruefung mbH (DMT) are focussed on research and development of biotechnological coal conversion processes. Up to now investigations carried out in the project lead to a number of important results. During work on the project a great number of different microorganisms was found able to degrade or solubilize coal or lignite. Enzymatic as well as regulation mechanisms of the microbial depolymerization processes have been characterized successfully. (orig.)

  10. 2011 Raditation & Climate Gordon Research Conference (July 10-15 2011- Colby College, Waterville, Maine)

    Energy Technology Data Exchange (ETDEWEB)

    Prof. Max Hoggblom

    2012-02-09

    The 2011 Gordon Research Conference on Radiation and Climate will present cutting-edge research on outstanding issues in climate change, particularly those in which the interactions between clouds, aerosols, and precipitation play a major role. The Conference will feature a broad range of topics, including grand challenges in atmospheric radiation and climate, cloud and water vapor feedbacks, aerosol-cloud-precipitation-climate interactions across scales, new approaches for remote sensing and in-situ observations of clouds, aerosols and precipitation, and multi-scale modeling challenges. The invited speakers will present the most important recent advances and future challenges in these areas. The Conference will bring together a collection of leading investigators who are at the forefront of their field, and will provide opportunities for scientists, especially junior scientists and graduate students, to present their work in poster format and exchange ideas with leaders in the field. The collegial atmosphere of this Conference, with programmed discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to brainstorm and promotes cross-disciplinary collaborations in the various research areas represented.

  11. Past and present supply of enriched uranium for research reactors in the European Union

    International Nuclear Information System (INIS)

    Mueller, H.

    2002-01-01

    In the last decade research reactor operators have focused mainly on the issues of disposal of spent research reactor fuel and the development of high density fuels. The safe supply of fresh uranium did not receive as much attention. This is surprising since the United States - who was the main supplier for LEU and HEU since the late 1950's - stopped supplying non-US research reactors with enriched uranium a decade ago. The reason for this stop of supply is described in this paper. This paper explains how research reactors in the E U continued to operate during the last decade, in spite of the fact that their primary supply source had not provided LEU and HEU over the same period. (author)

  12. Implementing falls prevention research into policy and practice in Australia: past, present and future.

    Science.gov (United States)

    Lord, Stephen R; Sherrington, Catherine; Cameron, Ian D; Close, Jacqueline C T

    2011-12-01

    Falls in older Australians are a significant public health issue with one in three older people falling one or more times each year. Many fall prevention randomized controlled trials have been conducted in Australia as well as across the world. The findings of these studies now constitute a substantial evidence base that can provide direction for health and lifestyle interventions for preventing falls in older people. This research evidence has contributed to health policy in Australia to some extent, but is yet to be widely implemented into practice. This opinion piece overviews previous policy initiatives and describes a new Partnership research program funded by the Australian National Health and Medical Research Council (NHMRC), which seeks to further influence health policy and address the ongoing research-practice gap. Copyright © 2011. Published by Elsevier Ltd.

  13. NFFA-Europe: enhancing European competitiveness in nanoscience research and innovation (Conference Presentation)

    Science.gov (United States)

    Carsughi, Flavio; Fonseca, Luis

    2017-06-01

    NFFA-EUROPE is an European open access resource for experimental and theoretical nanoscience and sets out a platform to carry out comprehensive projects for multidisciplinary research at the nanoscale extending from synthesis to nanocharacterization to theory and numerical simulation. Advanced infrastructures specialized on growth, nano-lithography, nano-characterization, theory and simulation and fine-analysis with Synchrotron, FEL and Neutron radiation sources are integrated in a multi-site combination to develop frontier research on methods for reproducible nanoscience research and to enable European and international researchers from diverse disciplines to carry out advanced proposals impacting science and innovation. NFFA-EUROPE will enable coordinated access to infrastructures on different aspects of nanoscience research that is not currently available at single specialized ones and without duplicating their specific scopes. Approved user projects will have access to the best suited instruments and support competences for performing the research, including access to analytical large scale facilities, theory and simulation and high-performance computing facilities. Access is offered free of charge to European users and users will receive a financial contribution for their travel, accommodation and subsistence costs. The users access will include several "installations" and will be coordinated through a single entry point portal that will activate an advanced user-infrastructure dialogue to build up a personalized access programme with an increasing return on science and innovation production. The own research activity of NFFA-EUROPE will address key bottlenecks of nanoscience research: nanostructure traceability, protocol reproducibility, in-operando nano-manipulation and analysis, open data.

  14. Present status of design, research and development of nuclear fusion reactors and problems

    International Nuclear Information System (INIS)

    1983-04-01

    Seven years have elapsed since the publication of ''Progress of nuclear fusion research and perspective toward the development of power reactors'' by the Atomic Energy Society of Japan in August, 1976. During this period, the research and development of nuclear fusion have changed from plasma physics to reactor technology, being conscious of the realization of fusion reactors. There are the R project in the Institute of Plasma Physics, Nagoya University, and the design and construction of JT-60 in Japan Atomic Energy Research Institute, to put it concretely. Now the research and development taking the economical efficiency into account are adopted. However, the type of fusion reactors is not reduced to tokamak type, accordingly the research and development to meet the diverse possibilities are forwarded. The progress of tokamak reactor research, core plasma design, nuclear design and shielding design, thermal structure design, the design of superconducting magnets, disassembling and repair, safety, economical efficiency, the conceptual design of other types than tokamak and others are reported. (Kako, I.)

  15. Present status of research activities relating global warming problems in Japan (mainly MITI and relating organizations)

    Energy Technology Data Exchange (ETDEWEB)

    Yokoyama, O.

    1993-12-31

    Japanese government has issued action program so called {open_quotes}Action Program to Arrest Global Warming{close_quotes} for preventing global warming at Oct., 1990. According to the program, CO{sub 2} emission should be stabilized on a per capita basis in the year 2000 and beyond at about same level as in 2000 by introducing several methods such as energy conservation, improvement of energy using efficiency, expanding use of renewable energy and so on. The basic concept, target and methods are summarized. At the same time, MITI published so called {open_quotes}New Earth 21{close_quotes} project which aims remedying the earth environment modified by human activities since industrial innovation began at about 200 years ago in coming 100 years. This plan proposed yearly step of research development of technology for mitigating CO{sub 2} emission. According to the MITI`s plan, 15 institutions belonging to AIST have carrying research for developing technology of reducing emission of CO{sub 2} and other greenhouse gases, with cooperation of other research organizations such as RITE (research Institute of Innovative Technology for Earth) and NEDO (New Energy and Industrial Technology Developing Organization). Time schedule of the research development by The New Earth 21 project is summarized in Table 2. Now, in Japan, many national institutions and universities, research works relating reduction and mitigation of GHG are carried out according to this guideline.

  16. 45 CFR 46.407 - Research not otherwise approvable which presents an opportunity to understand, prevent, or...

    Science.gov (United States)

    2010-10-01

    ... an opportunity to understand, prevent, or alleviate a serious problem affecting the health or welfare... § 46.407 Research not otherwise approvable which presents an opportunity to understand, prevent, or...) The IRB finds that the research presents a reasonable opportunity to further the understanding...

  17. Presentation of Original Research at the European Congress of Radiology 2010: Frequency of Publication in Medline-Indexed Journals Within 5 Years After Presentation.

    Science.gov (United States)

    Dollinger, Marco; Zeman, Florian; Müller-Wille, René; Beyer, Lukas Philipp; Stroszczynski, Christian; Bley, Thorsten Alexander; Wiggermann, Philipp

    2018-04-01

     To determine the rate at which original studies presented orally at the European Congress of Radiology (ECR) 2010 were published in Medline-indexed journals and to identify factors predictive of publication.  A total of 869 abstracts were included in the study. A Medline search of articles published between March 2010 and February 2015 was conducted to identify articles written by the first, second, and/or last authors of all abstracts published in the Scientific Program of ECR 2010. The publication year, journal, country of origin, subspecialty and nature of the research (i. e., human, animal or technical) were recorded.  Between March 2010 and February 2015 a total of 450 abstracts (publication rate, 51.8 %) were subsequently published in 125 Medline-indexed journals, chiefly in European Radiology (11.1 %). 443/450 (98.4 %) articles were published in English language. The subspecialties of molecular imaging and cardiac imaging had the highest publication rates (75.0 % and 62.0 %, respectively), while computer application studies had the lowest (27.6 %). The nature of research, origin of the abstract and subspecialty significantly influenced the subsequent publication rate.  More than half of the original studies presented orally at ECR 2010 were subsequently published in Medline-indexed journals. More articles were published in the journal European Radiology than in any other identified journal.   · ECR 2010 had a high subsequent publication rate. · Most subsequently published articles were published in radiology journals. · Nearly all articles were published in the English language. · Dollinger M, Zeman F, Müller-Wille R et al. Presentation of Original Research at the European Congress of Radiology 2010: Frequency of Publication in Medline-Indexed Journals Within 5 Years After Presentation. Fortschr Röntgenstr 2017; 190: 327 - 333. © Georg Thieme Verlag KG Stuttgart · New York.

  18. The present situations and perspectives on utilization of research reactors in Thailand

    Science.gov (United States)

    Chongkum, Somporn

    2002-01-01

    The Thai Research Reactor 1/Modification 1, a TRIGA Mark III reactor, went critical on November 7, 1977. It has been playing a central role in the development of both Office of Atomic Energy for Peace (OAEP) and nuclear application in Thailand. It has a maximum power of 2 MW (thermal) at steady state and a pulsing capacity of 2000 MW. The highest thermal neutron flux at a central thimber is 1×10 13 n/cm 2/s, which is extensively utilized for radioisotope production, neutron activation analysis and neutron beam experiments, i.e. neutron scattering, prompt gamma analysis and neutron radiography. Following the nuclear technological development, the OAEP is in the process of establishing the Ongkharak Nuclear Research Center (ONRC). The center is being built in Nakhon Nayok province, 60 km northeast of Bangkok. The centerpiece of the ONRC is a multipurpose 10 MW TRIGA research reactor. Facilities are included for the production of radioisotopes for medicine, industry and agriculture, neutron transmutation doping of silicon, and neutron capture therapy. The neutron beam facilities will also be utilized for applied research and technology development as well as training in reactor operations, performance of experiments and reactor physics. This paper describes a recent program of utilization as well as a new research reactor for enlarging the perspectives of its utilization in the future.

  19. The Paradigms They Are a-Changin': past, present and future of PVC bacteria research.

    Science.gov (United States)

    Rivas-Marín, Elena; Devos, Damien P

    2018-06-01

    These are exciting times for PVC researchers! The PVC superphylum is composed of the bacterial phyla Planctomycetes, Verrucomicrobia, Chlamydiae (those three founders giving it its name), Lentisphaerae and Kirimatiellaeota as well as some uncultured candidate phyla, such as the Candidatus Omnitrophica (previously known as OP3). Despite early debates, most of the disagreements that surround this group of bacteria have been recently resolved. In this article, we review the history of the study of PVC bacteria, with a particular focus on the misinterpretations that emerged early in the field and their resolution. We begin with a historical perspective that describes the relevant facts of PVC research from the early times when they were not yet termed PVC. Those were controversial times and we refer to them as the "discovery age" of the field. We continue by describing new discoveries due to novel techniques and data that combined with the reinterpretations of old ones have contributed to solve most of the discordances and we refer to these times as the "illumination age" of PVC research. We follow by arguing that we are just entering the "golden age" of PVC research and that the future of this growing community is looking bright. We finish by suggesting a few of the directions that PVC researches might take in the future.

  20. Laboratory Directed Research and Development LDRD-FY-2011

    Energy Technology Data Exchange (ETDEWEB)

    Dena Tomchak

    2012-03-01

    This report provides a summary of the research conducted at the Idaho National Laboratory (INL) during Fiscal Year (FY) 2011. This report demonstrates the types of cutting edge research the INL is performing to help ensure the nation's energy security. The research conducted under this program is aligned with our strategic direction, benefits the Department of Energy (DOE) and is in compliance with DOE order 413.2B. This report summarizes the diverse research and development portfolio with emphasis on the DOE Office of Nuclear Energy (DOE-NE) mission, encompassing both advanced nuclear science and technology and underlying technologies.

  1. Alaska Native Languages: Past, Present, and Future. Alaska Native Language Center Research Papers No. 4.

    Science.gov (United States)

    Krauss, Michael E.

    Three papers (1978-80) written for the non-linguistic public about Alaska Native languages are combined here. The first is an introduction to the prehistory, history, present status, and future prospects of all Alaska Native languages, both Eskimo-Aleut and Athabaskan Indian. The second and third, presented as appendixes to the first, deal in…

  2. Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

    International Nuclear Information System (INIS)

    Budau, J.

    2011-01-01

    Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

  3. Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Budau, J. [Bruce Power, Tiverton, Ontario (Canada)

    2011-09-15

    Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

  4. Inattentional blindness: present knowledge, recent research and implications for the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Budau, J. [Bruce Power, Tiverton, Ontario (Canada)

    2011-07-01

    Inattentional blindness can occur when our attention has been assigned to a primary task and not enough attentional resources are left to detect what can be a very important unexpected event. This unexpected event is often something that would be detected under normal conditions. Recent research has shown that perceptual load, and qualities of the unexpected stimulus can impact the occurrence of inattentional blindness. As the nuclear industry has situations of high perceptual load, consideration should be given to the implications of this research. (author)

  5. [Present status and trend of heart fluid mechanics research based on medical image analysis].

    Science.gov (United States)

    Gan, Jianhong; Yin, Lixue; Xie, Shenghua; Li, Wenhua; Lu, Jing; Luo, Anguo

    2014-06-01

    With introduction of current main methods for heart fluid mechanics researches, we studied the characteristics and weakness for three primary analysis methods based on magnetic resonance imaging, color Doppler ultrasound and grayscale ultrasound image, respectively. It is pointed out that particle image velocity (PIV), speckle tracking and block match have the same nature, and three algorithms all adopt block correlation. The further analysis shows that, with the development of information technology and sensor, the research for cardiac function and fluid mechanics will focus on energy transfer process of heart fluid, characteristics of Chamber wall related to blood fluid and Fluid-structure interaction in the future heart fluid mechanics fields.

  6. Meet the 'entangled' fieldworker - Distorted (re)presentations in tourism research

    DEFF Research Database (Denmark)

    Jensen, Martin Trandberg

    how photographic materialities, performativities and sensations contribute to new tourism knowledges. While highlighting the potential of distorted representation, the paper posits a cautionary note in regards to the influential role of academic journals in determining the qualities of visual data....... The paper exemplifies distorted representation through three impressionistic tales derived from ethnographic research on the European rail travel phenomenon, InterRail.......Tourism research has recently been informed by non-representational theories to highlight the socio-material, embodied and heterogeneous composition of tourist experiences. These advances have contributed to further reflexivity and called for novel ways to animate representations...

  7. The "Double Bind" of Re-presentation in Qualitative Research Methods.

    Science.gov (United States)

    Smithmier, Angela

    A current movement in qualitative research is a preoccupation with representation of the "other" (Denzin and Lincoln 1994). Feminists, critical theorists and postmodernists have questioned the dominant, legitimized social order and remained sensitive to the multiple issues related to and emanating from power. This paper briefly reviews the…

  8. Past, Present, and Future of Critical Quantitative Research in Higher Education

    Science.gov (United States)

    Wells, Ryan S.; Stage, Frances K.

    2014-01-01

    This chapter discusses the evolution of the critical quantitative paradigm with an emphasis on extending this approach to new populations and new methods. Along with this extension of critical quantitative work, however, come continued challenges and tensions for researchers. This chapter recaps and responds to each chapter in the volume, and…

  9. The Nursing Home Culture-Change Movement: Recent Past, Present, and Future Directions for Research

    Science.gov (United States)

    Rahman, Anna N.; Schnelle, John F.

    2008-01-01

    This article uses a retrospective approach to critique the research base underlying the nursing home culture-change movement--an effort to radically transform the nation's nursing homes by delivering resident-directed care and empowering staff. The article traces the development of the movement from its inception 10 years ago to 2005, when the…

  10. Present status of research and development of nuclear steelmaking in Japan

    International Nuclear Information System (INIS)

    Shimokawa, Keiji

    1979-01-01

    The Japanese steel industry consumes about 18% of total energy consumption in Japan, and 56 million tons of coking coal were imported in 1977 at the cost of approximately $3.3 billion. Securing of required quantity of coking coal, price negotiation, the transport and storage of coal, and environmental pollution are the problems concerning the steel industry. In order to solve these problems, the introduction of atomic energy to steel-making is considered. The use of high temperature gas-cooled reactors is capable of supplying large quantities of heat and electric power which are required for steel-making. The Committee on Utilization of Nuclear Energy, the Iron and Steel Institute of Japan, was established in 1968, and the research and development of nuclear steel-making were started as a national project in 1973. The outline of nuclear steel-making system is explained. The Japan Atomic Energy Research Institute is promoting the research and development on a multi-purpose HTGR with 1000 deg C outlet helium temperature. The research and development in progress now are as follows: high temperature heat exchangers, heat resistant superalloys, high temperature heat insulating materials, reducing gas-producing unit, reduced iron-producing system, and the total system for nuclear steel-making. (Kako, I.)

  11. The past, the present and the future of experimental research on myocardial ischemia and protection

    Czech Academy of Sciences Publication Activity Database

    Ošťádal, Bohuslav

    2009-01-01

    Roč. 61, č. 1 (2009), s. 3-12 ISSN 1734-1140 R&D Projects: GA MŠk(CZ) 1M0510 Institutional research plan: CEZ:AV0Z50110509 Keywords : myocardial ischemia * protection * cell death Subject RIV: FA - Cardiovascular Disease s incl. Cardiotharic Surgery Impact factor: 2.086, year: 2009

  12. Present status of plasma-wall interactions research and materials development activities in the US

    International Nuclear Information System (INIS)

    Hirooka, Y.; Conn, R.W.

    1989-08-01

    It is well known in the fusion engineering community that the plasma confinement performance in magnetic fusion devices is strongly affected by edge-plasma interactions with surface components. These plasma-material interactions (PMI) include fuel particle recycling and impurity generation both during normal and off-normal operation. To understand and then to control PMI effects, considerable effort has been made, particularly over the last decade in US, supported by Department of Energy, Division of Development and Technology. Also, because plasma-facing components are generally expected to receive significant amount of heat due to plasma bombardment and run-away electrons, materials must tolerate high-heat fluxes (HHF). The HHF-component research has been conducted in parallel with PMI research. One strong motivation for these research activities is that DT-burning experiments are currently planned in the Tokamak Test Fusion Reactor (TFTR) in early 1990s. Several different but mutually complementary approaches have been taken in the PMI+HHF research. The first approach is to conduct PMI experiments using toroidal fusion devices such as TFTR. The second one is to simulate elemental processes involved in PMI using ion beams and electron beams, etc. The last one but not least is to use non-tokamak plasma facilities. Along with these laboratory activities, new materials have been developed and evaluated from the PMI+HHF point of view. In this paper, several major PMI+HHF research facilities in US and their activities are briefly reviewed. 21 refs., 10 figs., 2 tabs

  13. Status of health and environmental research relative to direct coal liquefaction: 1976 to the present

    Energy Technology Data Exchange (ETDEWEB)

    Gray, R.H.; Cowser, K.E. (eds.)

    1982-06-01

    This document describes the status of health and environmental research efforts, supported by the US Department of Energy (DOE), to assist in the development of environmentally acceptable coal liquefaction processes. Four major direct coal liquefaction processes are currently in (or have been investigated at) the pilot plant stage of development. Two solvent refined coal processes (SRC-I and -II), H-coal (a catalytic liquefaction process) and Exxon donor solvent (EDS). The Pacific Northwest Laboratory was assigned responsibility for evaluating SRC process materials and prepared comprehensive health and environmental effects research program plans for SRC-I and -II. A similar program plan was prepared for H-coal process materials by the Oak Ridge National Laboratory. A program has been developed for EDS process materials by Exxon Research and Engineering Co. The program includes short-term screening of coal-derived materials for potential health and ecological effects. Longer-term assays are used to evaluate materials considered most representative of potential commercial practice and with greatest potential for human exposure or release to the environment. Effects of process modification, control technologies and changing operational conditions on potential health and ecological effects are also being evaluated. These assessments are being conducted to assist in formulating cost-effective environmental research programs and to estimate health and environmental risks associated with a large-scale coal liquefaction industry. Significant results of DOE's health and environmental research efforts relative to coal liquefaction include the following: chemical characterization, health effects, ecological fate and effects, amelioration and risk assessment.

  14. Comprehension instruction research-based best practices

    CERN Document Server

    Parris, Sheri R; Morrow, Lesley Mandel

    2015-01-01

    All key issues of research and practice in comprehension instruction are addressed in this highly regarded professional resource and course text. Leading scholars examine the processes that enable students to make meaning from what they read--and how this knowledge can be applied to improve teaching at all grade levels. Best practices for meeting the needs of diverse elementary and secondary students are identified. Essential topics include strategies for comprehending different types of texts, the impact of the Common Core State Standards (CCSS), cutting-edge assessment approaches, and the gr

  15. From abstract to publication: the fate of research presented at an annual forensic meeting.

    Science.gov (United States)

    Tambuscio, Silvia; Boghossian, Elie; Sauvageau, Anny

    2010-11-01

    In forensic sciences, the fate of abstracts presented at international meetings has not yet been assessed. The purpose of this study is to estimate publication ratio and evaluate possible predictors of publication after the 58th edition of the 2006 American Academy of Forensic Sciences annual meeting. Section of the meeting, type of presentation (oral platform or poster), number of authors per abstract and per paper, time span to publication, countries involved, and journal of publication were tabulated. A total of 623 abstracts were presented, from which 102 were subsequently published as a full paper. The overall publication rate was 16.4%, ranging from 3.4% (jurisprudence) to 28.8% (toxicology). The type of presentation (oral platform or poster) did not significantly affect the outcome of the abstract. However, a higher number of authors, foreign authors, and international collaboration were found to be good predictive factors of publication. © 2010 American Academy of Forensic Sciences.

  16. Research on presentation and query service of geo-spatial data based on ontology

    Science.gov (United States)

    Li, Hong-wei; Li, Qin-chao; Cai, Chang

    2008-10-01

    The paper analyzed the deficiency on presentation and query of geo-spatial data existed in current GIS, discussed the advantages that ontology possessed in formalization of geo-spatial data and the presentation of semantic granularity, taken land-use classification system as an example to construct domain ontology, and described it by OWL; realized the grade level and category presentation of land-use data benefited from the thoughts of vertical and horizontal navigation; and then discussed query mode of geo-spatial data based on ontology, including data query based on types and grade levels, instances and spatial relation, and synthetic query based on types and instances; these methods enriched query mode of current GIS, and is a useful attempt; point out that the key point of the presentation and query of spatial data based on ontology is to construct domain ontology that can correctly reflect geo-concept and its spatial relation and realize its fine formalization description.

  17. Safety analysis of the present status of the research reactor 'RA' at 'Vinca' Institute

    International Nuclear Information System (INIS)

    Jovic, V.; Jovic, L.; Zivotic, Z.; Milovanovic, Dj.

    1995-01-01

    Safety analysis of the nuclear facility which has been out of work for a long time and whose future is not defined at the present moment, can not be connected to the usual, normatively regulated system analysis procedure in both operational and accidental regimes. Therefore, the safety analysis of the present status of the present status of the reactor RA is related to system and components analysis which, in present conditions maintain their nuclear functions operational. In the first place, it refers to components and equipment in which radioactive radiation generation still exists and to installations and equipment maintaining radiation level below permitted limit. in the context of the analysis the following areas are being covered: present status characteristics, accidental events while operating period from 1959. to 1984., nuclear fuels and radioactive waste inventory, basic characteristics and status of safety-related systems and equipment, radiation protection, potential accident analysis at present status of the reactor RA, potential accidental situations due to natural events (earthquakes, water flood) or man-induced events and security. 8 refs

  18. Global mental health and the National Institute of Mental Health Research Domain Criteria.

    Science.gov (United States)

    Weine, Stevan Merill; Langenecker, Scott; Arenliu, Aliriza

    2018-05-01

    The National Institute of Mental Health (NIMH) Research Domain Criteria (RDoC) project presents innovative ways of investigating mental illness based on behavioral and neurobiological measures of dimensional processes. Although cultural psychiatrists have critiqued RDoC's implications and limitations for its under-developed focus on context and experience, RDoC presents opportunities for synergies with global mental health. It can capture aspects of clinical or sub-clinical behavior which are less dependent upon Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5) and perhaps better elucidate the role of culture in disease expression and resilience. Aim/Results: This article uses the example of migration to describe several starting points for new research: (1) providing components for building an investigable conceptual framework to understand individual's mental health, resilience and adjustment to migration challenges or social adversities in low- and middle-income countries (LMICs) and (2) identifying measurable factors which determine resilience or vulnerability, to guide development and evaluation of targeted prevention, treatment and recovery strategies for mental health in LMICs. In such ways, RDoC frameworks could help put the new cutting edge neurobiological dimensional scientific advances in a position to contribute to addressing mental health problems amid social adversities in LMICs. However, this would require a much-expanded commitment by both RDoC and global mental health researchers to address contextual and experiential dimensions.

  19. Libraries and Librarians: Key Partners for Progress in Health Literacy Research and Practice.

    Science.gov (United States)

    Whitney, Wanda; Keselman, Alla; Humphreys, Betsy

    2017-01-01

    The field of librarianship has a history of involvement in patient education, general literacy and information literacy efforts. This history and prominent placement in communities make libraries and librarians an excellent resource in advancing health literacy practice and research. This chapter provides an overview of health literacy and health information literacy efforts in US libraries over the past two decades. The chapter begins with the description of the role of the US National Library of Medicine in developing resources, programs, and partnerships serving health information needs of the public. It then overviews special training programs for increasing librarians' expertise with health information and health literacy support. The narrative also presents different models of health information outreach programs in diverse communities, focusing on serving special populations that may suffer from health disparities. The second half of the chapter describes libraries' and librarians' health information response to continuously evolving contexts, mediums, and requirements. One subsection describes librarians' outreach effort with cutting-edge technologies, such as virtual worlds and gaming. Another focuses on supporting patients' information needs in clinical settings. Two more describe how libraries meet patrons' health information needs in the context of disaster preparedness and health insurance market place sign-up. While presenting the information, to the extent possible, the chapter draws upon research and evaluation of the effectiveness of different types of programs. It also discusses enablers of successes, limitations of the existing data, and directions for future research.

  20. Present status of contamination monitoring at the Dalat Nuclear Research Institute (DNRI)

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Hoang Van [Dalat Nuclear Research Inst. (Viet Nam)

    1997-06-01

    The Dalat nuclear research reactor was renovated and upgraded from the previous TRIGA reactor. In Vietnam, it is a unique nuclear device having suitable neutron flux for the radioisotope production and neutron activation analysis. Soon after the reactor reached its initial criticality in November 1983, a programme has been formed to develop the application of nuclear techniques in various fields. In addition, the use of radioisotopes for diagnostic, therapeutic and other research purposes has been in progress. In order to support these activities, the radiation protection, especially the radiation contamination monitoring has been properly paid attention to. In DNRI, the Radiation Protection Department is responsible for controlling and supervising radiation and working safety for all activities. In this paper, the following items are described on radiation contamination monitoring: controlled area, surface contamination monitoring, and airborne concentration monitoring. (G.K.)

  1. Present state of research in Japan on toxicities of gases during fire

    Science.gov (United States)

    Kishitani, K.; Saito, F.; Yusa, S.

    Research on toxicities of gases during fire and gas toxicity experiments using animals conducted in full size fire tests is reported. The following tests were conducted: (1) analyses of formaldehyde, acrolein, and HCN; (2) analyses of smoke particulates; and (3) types and rates of generation of combustion products, and the investigation of the relationship between CO and CO2 generation and combustion conditions. The relationship between conditions of maximum emission of CO and CO2 is also investigated.

  2. Past, Present, and Future Business-to-Business and Industrial Marketing Research

    DEFF Research Database (Denmark)

    Lindgreen, Adam; Di Benedetto, C. Anthony; Geersbro, Jens

    2018-01-01

    This editorial summarizes both the development and impact of Peter LaPlaca, in terms of his work with and for the industrial and marketing purchasing research community, using several different perspectives. It also offers an overview of what (former) editors of other business-to-business marketing...... management journals think of Peter LaPlaca. Following that, this editorial briefly reviews dominant topics in Industrial Marketing Management....

  3. Georgia Teachers in Academic Laboratories: Research Experiences in the Geosciences

    Science.gov (United States)

    Barrett, D.

    2005-12-01

    The Georgia Intern-Fellowships for Teachers (GIFT) is a collaborative effort designed to enhance mathematics and science experiences of Georgia teachers and their students through summer research internships for teachers. By offering business, industry, public science institute and research summer fellowships to teachers, GIFT provides educators with first-hand exposure to the skills and knowledge necessary for the preparation of our future workforce. Since 1991, GIFT has placed middle and high school mathematics, science and technology teachers in over 1000 positions throughout the state. In these fellowships, teachers are involved in cutting edge scientific and engineering research, data analysis, curriculum development and real-world inquiry and problem solving, and create Action Plans to assist them in translating the experience into changed classroom practice. Since 2004, an increasing number of high school students have worked with their teachers in research laboratories. The GIFT program places an average of 75 teachers per summer into internship positions. In the summer of 2005, 83 teachers worked in corporate and research environments throughout the state of Georgia and six of these positions involved authentic research in geoscience related departments at the Georgia Institute of Technology, including aerospace engineering and the earth and atmospheric sciences laboratories. This presentation will review the history and the structure of the program including the support system for teachers and mentors as well as the emphasis on inquiry based learning strategies. The focus of the presentation will be a comparison of two placement models of the teachers placed in geoscience research laboratories: middle school earth science teachers placed in a 6 week research experience and high school teachers placed in 7 week internships with teams of 3 high school students. The presentation will include interviews with faculty to determine the value of these experiences

  4. Planning and Response to the Detonation of an Improvised Nuclear Device: Past, Present, and Future Research

    Energy Technology Data Exchange (ETDEWEB)

    Bentz, A

    2008-07-31

    While the reality of an improvised nuclear device (IND) being detonated in an American city is unlikely, its destructive power is such that the scenario must be planned for. Upon reviewing the academic literature on the effects of and response to IND events, this report looks to actual responders from around the country. The results from the meetings of public officials in the cities show where gaps exist between theoretical knowledge and actual practice. In addition to the literature, the meetings reveal areas where future research needs to be conducted. This paper recommends that local response planners: meet to discuss the challenges of IND events; offer education to officials, the public, and responders on IND events; incorporate 'shelter-first' into response plans; provide information to the public and responders using the 3 Cs; and engage the private sector (including media) in response plans. In addition to these recommendations for the response planners, the paper provides research questions that once answered will improve response plans around the country. By following the recommendations, both groups, response planners and researchers, can help the country better prepare for and mitigate the effects of an IND detonation.

  5. Research on urinary excretion of purine derivatives in ruminants: Past, present and future

    International Nuclear Information System (INIS)

    Chen, X.B.; Orskov, E.R.

    2004-01-01

    Research on urinary excretion of purine derivatives (PD), namely allantoin, uric acid, xanthine and hypoxanthine, in ruminants have been carried out with an objective to use the excretion of these purine metabolites as a parameter to estimate the intestinal flow of microbial protein. This paper reviews the published literature, from the first paper in 1931 to the current date. The current status of understanding in some key topics is discussed. The topics include: endogenous excretion, modelling the response of PD excretion to purine absorption, calculation of microbial N supply from PD excretion, use of spot urine measurement, possible use of plasma or milk PD as an alterative index, and applications in ruminant nutrition research. This review also covers the current understanding of PD excretion in different animal species, including sheep, cattle, goats, buffaloes, llamas, camels, yak and deer. Progress in analytical methods for the determination of purine derivatives is also discussed. Finally, areas of future research are highlighted. The paper stresses the need for more studies on metabolism of PD in the tissue, the kinetics of PD in the blood and physiological processes of renal excretion, so as to understand better the mechanism that accounts for the between-species and within species variation in PD excretion. Development of simpler and more rapid methods for defining the endogenous excretion and purine input-output relationship is also an area for future work. (author)

  6. The Present of Environmental Psychology Researches in China: Base on the Bibliometric Analysis and Knowledge Mapping

    Science.gov (United States)

    Xu, Junhua; Wang, Qi; Zhu, Leiye; Qing, Wu; Jin, Meidong; Zhang, Rui; Wang, Haibin

    2018-03-01

    Environmental psychology is an interdisciplinary field that focuses on the interplay between individuals and their surroundings. Chinese researchers conducted extensive research on the field and produced a wealth of academic achievements, especially on the application of environmental psychology, such as the protection of minority towns and villages and the prevention and solution of air pollution. To reveal the current situation of the researches in China, 388 related papers from the China National Knowledge Infrastructure (CNKI) were analyzed by bibliometric and Knowledge Mapping. The results show that: (1) these studies stared since 1982 and demonstrated a year-on-year growth trend since 2001, which reaches a historical peak in 2016. Peiwen Zhan, Hu Zhao and Xiaofeng Lu top the list with a total of eighteen articles and Heilongjiang University is the best performer among the contributing organizations. (2)“Environmental Psychology” is the most frequently cited keywords and “Environmental perception”, “Physical environment” and “living environment” have the longest span of the bursts. the top seven largest clusters, which were environment, surroundings, application, privacy, environmental perception environmental art and physical environment.

  7. Planning and Response to the Detonation of an Improvised Nuclear Device: Past, Present, and Future Research

    International Nuclear Information System (INIS)

    Bentz, A.

    2008-01-01

    While the reality of an improvised nuclear device (IND) being detonated in an American city is unlikely, its destructive power is such that the scenario must be planned for. Upon reviewing the academic literature on the effects of and response to IND events, this report looks to actual responders from around the country. The results from the meetings of public officials in the cities show where gaps exist between theoretical knowledge and actual practice. In addition to the literature, the meetings reveal areas where future research needs to be conducted. This paper recommends that local response planners: meet to discuss the challenges of IND events; offer education to officials, the public, and responders on IND events; incorporate 'shelter-first' into response plans; provide information to the public and responders using the 3 Cs; and engage the private sector (including media) in response plans. In addition to these recommendations for the response planners, the paper provides research questions that once answered will improve response plans around the country. By following the recommendations, both groups, response planners and researchers, can help the country better prepare for and mitigate the effects of an IND detonation

  8. Solar research with ALMA: Czech node of European ARC as your user-support infrastructure

    Science.gov (United States)

    Bárta, M.; Skokić, I.; Brajša, R.; Czech ARC Node Team

    2017-08-01

    ALMA (Atacama Large Millimeter/sub-millimeter Array) is by far the largest project of current ground-based observational facilities in astronomy and astrophysics. It is built and operated in the world-wide cooperation (ESO, NRAO, NAOJ) at altitude of 5000m in the desert of Atacama, Chile. Because of its unprecedented capabilities, ALMA is considered as a cutting-edge research device in astrophysics with potential for many breakthrough discoveries in the next decade and beyond. In spite it is not exclusively solar-research dedicated instrument, science observations of the Sun are now possible and has recently started in the observing Cycle 4 (2016-2017). In order to facilitate user access to this top-class, but at the same moment very complicated device to researchers lacking technical expertise, a network of three ALMA Regional Centers (ARCs) has been formed in Europe, North America, and East Asia as a user-support infrastructure and interface between the observatory and users community. After short introduction to ALMA the roles of ARCs and hint how to utilize their services will be presented, with emphasis to the specific (and in Europe unique) mission of the Czech ARC node in solar research with ALMA. Finally, peculiarities of solar observations that demanded the development of the specific Solar ALMA Observing Modes will be discussed and the results of Commissioning and Science Verification observing campaigns (solar ALMA maps) will be shown.

  9. Teacher Research Programs = Increased Student Achievement

    Science.gov (United States)

    Dubner, J.

    2011-12-01

    Columbia University's Summer Research Program for Science Teachers (SRP), founded in 1990, is one of the largest, best known university professional development programs for science teachers in the U.S. For eight weeks in each of two consecutive summers, teachers participate as a member of a research team, led by a member of Columbia University's research faculty. In addition to the laboratory experience, all teachers meet weekly during the summer for a series of pedagogical activities to assist them in transferring the experience to their classrooms. The primary goal of the program is to provide K-12 science teachers with opportunities to work at the cutting edge of science and engineering, and thus to revitalize their teaching and help them to appreciate the use of inquiry-based methods in their classroom instruction. The secondary goals of the program are to give the pre-college teacher the ability to guide their students toward careers in science and engineering, to develop new teaching strategies, and to foster long-term scholarly collaborations. The last is especially important as it leads to a model of the teacher as active in science yet committed to the pre-college classroom. Since its inception, SRP has focused on an objective assessment of the program's impact on attitudes and instructional practices of participating teachers, on the performance of these teachers in their mentors' laboratories, and most importantly, on the impact of their participation in the program has on student interest and performance in science. Our research resulted in a paper published in the journal Science. SRP also facilitates a multi-site survey-based evaluation of other teacher research programs around the country. The author will present the findings of both studies.

  10. The eel immune system: present knowledge and the need for research

    DEFF Research Database (Denmark)

    Nielsen, Michael Engelbrecht; Esteve-Gassent, M. D.

    2006-01-01

    The European eel, Anguilla anguilla, is one of the most important warm water fish species cultured in southern Europe and the Mediterranean as well as in northern countries including Germany, the Netherlands and Denmark. The Japanese eel, A. japonica, is an important cultured fish in several...... Asiatic countries including Japan, China and Taiwan. During recent decades, research has been performed to elucidate the immune response of these species against different pathogens (viruses, bacteria or parasites). Nevertheless, there is very limited information in terms of both cellular and humoral...

  11. The past, present, and future of test and research reactor physics

    International Nuclear Information System (INIS)

    Ryskamp, J.M.

    1992-01-01

    Reactor physics calculations have been performed on research reactors since the first one was built 50 yr ago under the University of Chicago stadium. Since then, reactor physics calculations have evolved from Fermi-age theory calculations performed with slide rules to three-dimensional, continuous-energy, coupled neutron-photon Monte Carlo computations performed with supercomputers and workstations. Such enormous progress in reactor physics leads us to believe that the next 50 year will be just as exciting. This paper reviews this transition from the past to the future

  12. Present concepts of radiation action in living organisms, and the way to move research forwards

    International Nuclear Information System (INIS)

    Atkinson, Mike J.

    2017-01-01

    500 years after Professor Luther's iconoclastic ''Wittenberg Declarations'' it is appropriate to reflect on the beliefs used to underpin the principles of radiation protection. Paradigms that no longer stand the test of time include the absence of non-targeted effects, the strict distinction between deterministic and stochastic effects, and target theory with associated clonal evolution. Even linearity in the dose response relationship is questioned. The following is a personal reflection on the current state of radiobiological research.

  13. Present concepts of radiation action in living organisms, and the way to move research forwards

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, Mike J. [Helmholtz Zentrum Muenchen - Deutsches Forschungszentrum fuer Gesundheit und Umwelt (GmbH), Neuherberg (Germany). Inst. fuer Strahlenbiologie

    2017-07-01

    500 years after Professor Luther's iconoclastic ''Wittenberg Declarations'' it is appropriate to reflect on the beliefs used to underpin the principles of radiation protection. Paradigms that no longer stand the test of time include the absence of non-targeted effects, the strict distinction between deterministic and stochastic effects, and target theory with associated clonal evolution. Even linearity in the dose response relationship is questioned. The following is a personal reflection on the current state of radiobiological research.

  14. Researches on solar energy, from yesterday to the present day: an historical project

    International Nuclear Information System (INIS)

    Guthleben, Denis

    2013-01-01

    On 19 October 2011 the committee for the history of the CNRS joined forces with the institute of engineering and system science (Insis-CNRS) to undertake a project devoted to the history of research into solar power with the support of the history of electricity committee of the Foundation EDF. This initiative might seem to be riding the crest of a wave as, after a long hiatus full of disappointments and hesitation, solar power has returned to the centre of the stage in France since the start of the millennium. The CNRS itself launched its PIE (interdisciplinary energy programme) initiative in 2001, with photovoltaic, thermal and thermodynamic solar playing a central role

  15. Present status and subjects of research on heat removal in high conversion light water reactors

    International Nuclear Information System (INIS)

    Murao, Yoshio

    1990-01-01

    Merits of high conversion LWRs: (1) The utilization of nuclear fuel several times as much as that in LWRs is possible. The rate of effective utilization of uranium is 4-6%. (2) The active storage of plutonium is feasible. (3) The bridging to the nuclear fuel cycle industries in fast reactor age can be done. (4) These contribute to the control of plutonium storage as the partner of FBRs in fast reactor age. (5) These contribute to the flexibility of medium and long term energy strategy. The reduction of natural uranium demand by the introduction of high conversion LWRs: Assuming the scale of nuclear power facilities in 2030 as 107 million kW, and that HCLWRs are introduced from 2000, the reduction till 2100 is 13%. The features of high conversion LWRs, the effect of improving the conversion ratio by spectral hardening and so on are explained. The specification of high conversion LWRs is shown in comparison with other reactor types. The aim is the high conversion PWRs in which the same safety as conventional LWRs is ensured, and energy resources and economical efficiency are attractive. The schedule of the research and the subjects of the thermo-hydraulic engineering research are shown. (K.I.)

  16. Joint research centre fusion materials irradiations in HFR: Present status and prospectives

    International Nuclear Information System (INIS)

    Casini, G.; Fenici, P.

    1989-01-01

    First a review is made of the Joint Research Centre experimental activity at HFR-Petten in the frame of the Fusion Technology and Safety Programme. The materials under investigation are: Cr-Ni Austenitic steels (316-L type) and Cr-Mn Austenitic steels (AMCR and FI type) as structural materials and Pb-17Li eutetic as tritium breeding material. The experiments on structural materials comprise: Sample irradiations with post-irradiation tensile tests (FRUST) Sample irradiations under constant load and post-irradiation strain measurement (TRIESTE) On-line creep tests (CRISP). The experiments on Pb-17Li breeder material regard sample irradiations to investigate tritium production and recovery as well as tritium permeation through blanket structures (LIBRETTO Experiment). Both irradiations on structural and breeding materials will be pursued up to the end of the current JRC-Multiannual Programme (1988-1991) and even further. In the last part of the paper expected developments of the testing programme at HFR are discussed. New areas of research should involve materials for divertor applications (NET/ITER) and advanced low activation composite materials for Commercial Power Reactors

  17. Present status of mechanical testing technology at the Research Hot Laboratory

    International Nuclear Information System (INIS)

    Kizaki, M.; Tobita, T.; Koya, T.; Kikuchi, T.

    1993-01-01

    Mechanical tests of irradiated metallic materials at the Research Hot Laboratory(RHL) have been carried out for 30 years to support material research in JAERI and to evaluate the irradiation integrity of pressure vessel steel in commercial power plant. Two tensile testing machines and one Charpy impact testing machine are available for the examinations. One of the tensile testing machines has 1000 kgf load capacity under the vacuum of ∼ 10 -7 torr at the temperature of 1300degC max.. The other one has 10 tonf load capacity, and is utilized for the multi-purpose tests such as tensile and compressive tests in air atmosphere at the temperature between -160 and 900degC. Examinations cover tensile test, bending test, J ic fracture toughness test, low cycle fatigue test and so on. Charpy impact testing machine with notched-bar specimen is instrumented with 30 kgf-m capacity in the temperature range of -140 - 240 degC. To support these mechanical tests in RHL, special jigs, devices and instruments have been developed. (author)

  18. The Present of Architectural Psychology Researches in China- Based on the Bibliometric Analysis and Knowledge Mapping

    Science.gov (United States)

    Zhu, LeiYe; Wang, Qi; Xu, JunHua; Wu, Qing; Jin, MeiDong; Liao, RongJun; Wang, HaiBin

    2018-03-01

    Architectural Psychology is an interdisciplinary subject of psychology and architecture that focuses on architectural design by using Gestalt psychology, cognitive psychology and other related psychology principles. Researchers from China have achieved fruitful achievements in the field of architectural psychology during past thirty-three years. To reveal the current situation of the field in China, 129 related papers from the China National Knowledge Infrastructure (CNKI) were analyzed by CiteSpace II software. The results show that: (1) the studies of the field in China have been started since 1984 and the annual number of the papers increased dramatically from 2008 and reached a historical peak in 2016. Shanxi Architecture tops the list of contributing publishing journals; Wuhan University, Southwest Jiaotong University and Chongqing University are the best performer among the contributing organizations. (2) “Environmental Psychology”, “Architectural Design” and “Architectural Psychology” are the most frequency keywords. The frontiers of the field in China are “architectural creation” and “environmental psychology” while the popular research topics were“residential environment”, “spatial environment”, “environmental psychology”, “architectural theory” and “architectural psychology”.

  19. LABORATORY OF CLINICAL IMMUNOLOGY N.V. SKLIFOSOVSKY RESEARCH INSTITUTE FOR EMERGENCY MEDICINE (HISTORY AND PRESENT

    Directory of Open Access Journals (Sweden)

    M. A. Godkov

    2013-01-01

    Full Text Available ABSTRACT. Assessment of the immune status of patients with urgent types of pathology in the Institute for Emergency Medicine is performed according to three main objects of research: humoral , phagocytic and lymphocytic components of immune system . This complex allows to fully and adequately evaluate the condition of the immune system of patients at different stages of traumatic disease and after transplantation of organs and tissues , to forecast the probability of septic complications developing, adjust the therapy . During 45 years of work of immunological service formed the algorithm of the adequate immunological screening was formed, number of innovative methods of diagnosis was developed, the ideology of post-test counseling of patients by immunologists was created, mathematical methods of storage, modeling and processing of research results was introduced. Laboratory staff identified a number of medical and social factors in the spread of blood-borne viral infections (HIV, hepatitis B and C. New organizational and economic methods of management team were introduced in the laboratory. The basis of the work is equal integration of scientific and clinical staff of the laboratory. 

  20. Present situation of researches on polar ionosphere by C.C.I.R

    International Nuclear Information System (INIS)

    Ishikawa, Saburo

    1974-01-01

    Various subjects of studies made by the sixth research committee of C.C.I.R. (International Radio Consultative Committee) are reported. The C.C.I.R. has not any definite study programme and question concerning polar ionosphere, because it studies and delivers opinion on the techniques and operation of radio communication especially in developing countries. The subjects of study programme by the sixth research committee are as follows: estimation of the intensity and transmission loss of space wave electric field in a zone between 1.5 and 40 MHz, observation of the ionosphere of oblique entrance, scattering propagation of ionosphere, back scattering, fading of signal transmitted through ionosphere, transmission of space waves in the zone between 150 and 1,500 kHz, and effect of ionosphere on space communication. In addition, the following fourteen reports are cited: confirmation of prodromal phenomena of ionosphere disturbances, observation of the ionosphere of oblique entrance, remote propagation with supermode, basic information on forecast, back scattering, side scattering from the ground surface and ionosphere, Esub(s) propagation, scattering propagation, Esub(s) forecast, fading, effect of ionosphere on the transmission between the earth and space, radio noise produced in and above ionosphere, and propagation of standard broadcast wave. (Iwakiri, K.)

  1. Flood Risk Management Policy in Scotland: Research Questions Past, Present and Future

    Science.gov (United States)

    Wilkinson, Mark; Hastings, Emily; MacDonald, Jannette

    2016-04-01

    Scotland's Centre of Expertise for Waters (CREW) delivers accessible research and expert opinion to support the Scottish Government and its delivery partners in the development and implementation of water policy. It was established in 2011 by the Scottish Government (Rural and Environmental Science and Analytical Services) in recognition of a gap in the provision of short term advice and research to policy (development and implementation). Key policy areas include the Water Framework Directive, Floods Directive, Drinking Water Directive, Habitats Directive and Scotland's Hydro Nation Strategy. CREW is unique in its demand-driven and free service for policy makers and practitioners, managing the engagement between scientists, policy makers and practitioners to work effectively across this interface. The users of CREW are the Scottish Government, Scottish Environment Protection Agency, Scottish Natural Heritage and Scottish Water. CREW has funded around 100 projects relating to water policy since its inception in 2011. Of these, a significant number relate to flood risk management policy. Based on a review of work to date, this poster will give an overview of these projects and a forward look at the challenges that remain. From learning from community led flood risk management to surface water flood forecasting for urban communities, links will be made between sustainable and traditional flood risk management while considering the perceptions of stakeholders to flood risk management. How can we deliver fully integrated flood risk management options? How policy makers, scientists and land managers can better work together will also be explored.

  2. Engineering brain-computer interfaces: past, present and future.

    Science.gov (United States)

    Hughes, M A

    2014-06-01

    Electricity governs the function of both nervous systems and computers. Whilst ions move in polar fluids to depolarize neuronal membranes, electrons move in the solid-state lattices of microelectronic semiconductors. Joining these two systems together, to create an iono-electric brain-computer interface, is an immense challenge. However, such interfaces offer (and in select clinical contexts have already delivered) a method of overcoming disability caused by neurological or musculoskeletal pathology. To fulfill their theoretical promise, several specific challenges demand consideration. Rate-limiting steps cover a diverse range of disciplines including microelectronics, neuro-informatics, engineering, and materials science. As those who work at the tangible interface between brain and outside world, neurosurgeons are well placed to contribute to, and inform, this cutting edge area of translational research. This article explores the historical background, status quo, and future of brain-computer interfaces; and outlines the challenges to progress and opportunities available to the clinical neurosciences community.

  3. The present status of iodine chemistry research in Canada and its application to reactor safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Weaver, K R [Ontario Hydro Nuclear, Toronto (Canada); Kupferschmid, W C.H.; Wren, J C; Ball, J M [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs.

    1996-12-01

    The current need to understand iodine chemistry in a reactor safety context has become more sharply focussed as the level of that understanding has advanced. At the same time, the situations of most concern within containment, from an iodine perspective, are also being redefined in the light of that understanding. The present paper summarises these developments. Over the past five years, considerable advances have occurred in our understanding of iodine chemistry under conditions of interest in reactor accidents. A number of key experiments have yielded important results in the areas of solution chemistry, the role of surfaces, the importance of organics and the effects of impurities. This understanding supplements the already substantial gains made in characterising the key roles of pH and the effects of radiation. All these factors underline the now evident fact that the kinetics of iodine are the controlling factor when radiation is involved, and that a number of reactive species, not present in thermal reactions, effectively control the observed volatility of iodine. In this paper, recent advances are summarised and the present status of our understanding of iodine chemistry is reviewed. Specifically, an attempt is made to identify those areas where our understanding appears to be relatively complete, and to flag the remaining critical areas where our attention is currently focussed. The state of our modelling capability is reviewed, as is the significance or related areas such as the role of mass transfer. Finally, an overview is presented of the significance of this work for reactor safety, and our expectations for its application over the near term future. (author) 2 figs., 12 refs.

  4. The present status of iodine chemistry research in Canada and its application to reactor safety analysis

    International Nuclear Information System (INIS)

    Weaver, K.R.; Kupferschmid, W.C.H.; Wren, J.C.; Ball, J.M.

    1996-01-01

    The current need to understand iodine chemistry in a reactor safety context has become more sharply focussed as the level of that understanding has advanced. At the same time, the situations of most concern within containment, from an iodine perspective, are also being redefined in the light of that understanding. The present paper summarises these developments. Over the past five years, considerable advances have occurred in our understanding of iodine chemistry under conditions of interest in reactor accidents. A number of key experiments have yielded important results in the areas of solution chemistry, the role of surfaces, the importance of organics and the effects of impurities. This understanding supplements the already substantial gains made in characterising the key roles of pH and the effects of radiation. All these factors underline the now evident fact that the kinetics of iodine are the controlling factor when radiation is involved, and that a number of reactive species, not present in thermal reactions, effectively control the observed volatility of iodine. In this paper, recent advances are summarised and the present status of our understanding of iodine chemistry is reviewed. Specifically, an attempt is made to identify those areas where our understanding appears to be relatively complete, and to flag the remaining critical areas where our attention is currently focussed. The state of our modelling capability is reviewed, as is the significance or related areas such as the role of mass transfer. Finally, an overview is presented of the significance of this work for reactor safety, and our expectations for its application over the near term future. (author) 2 figs., 12 refs

  5. Present condition of survey research on actualization strategy of fast breeder reactor (FBR) cycling. Design research on fuel production system

    International Nuclear Information System (INIS)

    Tanaka, Kenya

    2001-01-01

    The fuel production system design investigation was performed for construction of fuel production process concept and plant image searching for the targets such as economics, environmental loading reduction, and so on required for practical use of FBR fuel recycling at a premise of safety security. By expectation of economics as a fuel cycling system, enhancement of nuclear proliferation resistance, and so on, it becomes more important to investigate on a fuel cycling system suitable for raw materials with low decontamination and high radiation intensity. In addition, it is also necessary to carry out investigation on fuel production system concept accompanies with MA recycling system for reduction of environmental loading. Therefore, investigation objects on the system were laid their fundamental processes on denitrification conversion/pelletizing process and gelation/vibration filling process for raw material solution from advancing wet reprocessing and on vibration filling process for oxide granules obtained from dry reprocessing system and casting method for metal fuels. As a result, for the pollution removal fuel production system suitable for either of wet/dry reprocessing, a mass-production scale production plant image was elucidated at a premise of production yield, realizability of remote automation system, and so on. On candidate concepts of every fuel production system, no fatal defect was found on results of outline evaluation on features of system such as production facility scale and so on before present stage. (G.K.)

  6. Vertebrate land invasions-past, present, and future: an introduction to the symposium.

    Science.gov (United States)

    Ashley-Ross, Miriam A; Hsieh, S Tonia; Gibb, Alice C; Blob, Richard W

    2013-08-01

    The transition from aquatic to terrestrial habitats was a seminal event in vertebrate evolution because it precipitated a sudden radiation of species as new land animals diversified in response to novel physical and biological conditions. However, the first stages of this environmental transition presented numerous challenges to ancestrally aquatic organisms, and necessitated changes in the morphological and physiological mechanisms that underlie most life processes, among them movement, feeding, respiration, and reproduction. How did solutions to these functional challenges evolve? One approach to this question is to examine modern vertebrate species that face analogous demands; just as the first tetrapods lived at the margins of bodies of water and likely moved between water and land regularly, many extant fishes and amphibians use their body systems in both aquatic and terrestrial habitats on a daily basis. Thus, studies of amphibious vertebrates elucidate the functional demands of two very different habitats and clarify our understanding of the initial evolutionary challenges of moving onto land. A complementary approach is to use studies of the fossil record and comparative development to gain new perspectives on form and function of modern amphibious and non-amphibious vertebrate taxa. Based on the synthetic approaches presented in the symposium, it is clear that our understanding of aquatic-to-terrestrial transitions is greatly improved by the reciprocal integration of paleontological and neontological perspectives. In addition, common themes and new insights that emerged from this symposium point to the value of innovative approaches, new model species, and cutting-edge research techniques to elucidate the functional challenges and evolutionary changes associated with vertebrates' invasion of the land.

  7. Webinar Presentation: Assessing the Combined Effects of Environmental and Social Stress: A Review of the Evidence and Implications for Research

    Science.gov (United States)

    This presentation, Assessing the Combined Effects of Environmental and Social Stress: A Review of the Evidence and Implications for Research, was given at the NIEHS/EPA Children's Centers 2016 Webinar Series: Exposome held on May 11, 2016.

  8. Presentations of scientific research results as a strategy to increase the interest of students in physiology

    Directory of Open Access Journals (Sweden)

    Caroline Dalla Colletta Altermann

    2016-06-01

    Full Text Available In the search for strategies to arouse the interest of undergraduate students in science, it was proposed the project "Colloquiums in Physiology" in order to disseminate and discuss scientific discoveries and improve the students’ interest in Physiology. This work aimed to verify the perception of participants about the impact of this activity. The activity included lectures throughout the semester and at the end of each lecture, a questionnaire was applied to listeners. Among the 171 students who answered the questionnaire, 81% (n=139 considers that this proposal increased their interest in physiology, 96% (n=164 believes that it is an important activity and achieved its goal of promote science disclosure, and 83% (n=142 stated that the project promotes interaction between research, teaching and outreach activities. Thus, it highlights the importance of this type of event for the academic formation.

  9. Present status of research and development on solar cells in Japan

    International Nuclear Information System (INIS)

    Goto, S.; Kawakami, K.; Nishimura, T.; Uda, K.; Ishiyama, K.; Aratani, H.

    2004-01-01

    New Energy and Industrial Technology Development Organization (NEDO) has promoted a 5-year master plan (JFY2001-2005) for research and development of solar cells and modules in order to achieve the target of 4.82 GW, which is the target of Japanese cumulative photovoltaic installation in JFY2010, and worldwide PV deployment after 2010. Various technologies for reducing manufacturing cost are extensively developed in this project. We report recent status of three main themes in this project. Advanced manufacturing technology is designed as a short-term project which set itself the goal of manufacturing cost of 140 yen/W. Advanced solar cells technology based on a mid-term project and manufacturing cost of 100 yen/W as the object. Innovative PV technology is a long-term project and focused on novel technologies that enables further cost reduction in and beyond the year 2010. (authors)

  10. Research in Social Work: the future in the present. Reflections on the portuguese knowledge building process

    Directory of Open Access Journals (Sweden)

    Raquel Marta

    2016-06-01

    Full Text Available The debate surrounding the construction of scientific knowledge within social work is discussed. The social work class seeks new foundations that allow within the context of structural change, the strengthening of professional identity and challenge of the vestiges of intellectual segregation that historical constraints have left. This paper seeks to outline a research strategy for reconciliation and coordination of intellectual and professional work in order to give visibility to new and different domains of interpretation and action, while claiming that considering pluri-perspectives potentiates the knowledge transformation process. Underlining this confluence of complex thinking elements, this article incorporates the space-time dimension and discusses and recognizes the unavoidable circularity as a way to interrogate knowledge that is compartmentalized and fragmented, placing an emphasis both on knowledge and on the interrelationship between knowing, doing, being and relating. In addition, examines the recognition of the nature of those relationships among various disciplines and perspectives.

  11. Proceeding on the scientific meeting and presentation on basic research of nuclear science and technology (book I): physics, reactors

    International Nuclear Information System (INIS)

    Syarip; Prayitno; Samin; Agus Taftazani; Sudjatmoko; Pramudita Anggraita; Gede Sutresna W; Tjipto Sujitno; Slamet Santosa; Herry Poernomo; R Sukarsono; Prajitno

    2014-06-01

    Scientific Meeting and Presentation on Basic Research in Nuclear Science and Technology is an annual activity held by Centre for Accelerator Science and Technology, National Nuclear Energy Agency, in Yogyakarta, for monitoring research activities achieved by the Agency. The papers presented in the meeting were collected into proceedings which were divided into two groups that are physics and nuclear reactors. The proceedings consists of three articles from keynote speakers and 25 articles from BATAN and others participants.(PPIKSN)

  12. Presentation of the National Center for Research in Vocational Education [Berkeley, California] at the AVA Annual Conference.

    Science.gov (United States)

    National Center for Research in Vocational Education, Berkeley, CA.

    This collection contains the following conference presentations about the National Center for Research in Vocational Education at the University of California at Berkeley: "Visions and Principles" (Charles Benson); "How the Center Sees Its Role" (Gordon Swanson); "The Research Agenda" (Sue Berryman); "The Service…

  13. Acquisition of a Laser Scanning Confocal Microscope to Examine CNS Activity of Antidotal Oximes and to Enhance Undergraduate Research Training Across the Sciences

    Science.gov (United States)

    2016-07-15

    interdisciplinary research activities in the Center for Science, Health, and Policy, support pedagogical advances, 1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND...be subject to any oenalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE...Health, and Policy, support pedagogical advances, and expose students to cutting edge technologies. Users come from the biology, chemistry, physics

  14. Present status of tandem accelerator research facility (MALT) in University of Tokyo

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Koichi; Hatori, Satoshi; Nakano, Chuichiro; Sunohara, Yoko [Tokyo Univ. (Japan). Research Center for Nuclear Science and Technology

    1996-12-01

    The tandem accelerator in University of Tokyo, which was renewed from 1991 to March, 1994 started the joint utilization within the University since April, 1995 after about one year of the period of adjustment. The time of operation exceeding 3500 hours in one year was recorded. This facility is that for carrying out the minute analysis such as AMS, PIXE, NRA and others and the research of atomic and molecular physics, and called microanalysis laboratory-tandem accelerator (MALT). Support has been done by placing emphasis on the development of AMS measurement which enables the microanalysis of {sup 14}C,{sup 10}Be and {sup 26}Al, but the accuracy of {sup 14}C AMS did not attain the practical level. {sup 10}Be and {sup 26}Al AMS reached almost the practical level, and the measurement of actual samples has been carried out. The state of operation and utilization of the MALT is reported. As to the recent troubles and the countermeasures in the MALT, the voltage instability of the accelerator, the unstable ion source support mechanism and the poor transmissivity of beam in the accelerator are described. (K.I.)

  15. Present status of neutron beam facilities at the research reactor, HANARO, and its future prospect

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang-Hee; Kang, Young-Hwan; Kuk, Il-Hiun [Korea Atomic Energy Research Institute, Taejon (Korea)

    2001-03-01

    Korea has been operating its new research reactor, HANARO, since its first criticality in 1995. It is an open-tank-in-pool type reactor using LEU fuel with thermal neutron flux of 2 x 10{sup 14} nominally at the nose in the D{sub 2}O reflector having 7 horizontal beam ports and a provision of vertical hole for cold neutron source installation. KAERI has pursued an extensive instrument development program since 1992 by the support of the nuclear long-term development program of the government and there are now 4 working instruments. A high resolution powder diffractometer and a neutron radiography facility has been operational since late 1997 and 1996, respectively. A four-circle diffractometer has been fully working since mid 1999 and a small angle neutron spectrometer is just under commissioning phase. With the development of linear position sensitive detector with delay-line readout electronics, we have developed a residual stress instrument as an optional machine to the HRPD for last two years. Around early 1998 informal users program started with friendly users and it became a formal users support program by the ministry of science and technology. Short description for peer group formation and users activities is given. (author)

  16. Present status of neutron beam facilities at the research reactor, HANARO, and its future prospect

    International Nuclear Information System (INIS)

    Lee, Chang-Hee; Kang, Young-Hwan; Kuk, Il-Hiun

    2001-01-01

    Korea has been operating its new research reactor, HANARO, since its first criticality in 1995. It is an open-tank-in-pool type reactor using LEU fuel with thermal neutron flux of 2 x 10 14 nominally at the nose in the D 2 O reflector having 7 horizontal beam ports and a provision of vertical hole for cold neutron source installation. KAERI has pursued an extensive instrument development program since 1992 by the support of the nuclear long-term development program of the government and there are now 4 working instruments. A high resolution powder diffractometer and a neutron radiography facility has been operational since late 1997 and 1996, respectively. A four-circle diffractometer has been fully working since mid 1999 and a small angle neutron spectrometer is just under commissioning phase. With the development of linear position sensitive detector with delay-line readout electronics, we have developed a residual stress instrument as an optional machine to the HRPD for last two years. Around early 1998 informal users program started with friendly users and it became a formal users support program by the ministry of science and technology. Short description for peer group formation and users activities is given. (author)

  17. Present status of research on Re-186 radiopharmaceuticals at Radioisotope Production Center

    Energy Technology Data Exchange (ETDEWEB)

    Mutalib, A [Radioisotope Production Center, National Atomic Energy Agency Kawasan PUSPIPTEK, Serpong (Indonesia)

    1998-10-01

    Rhenium shows a close chemical similarity to technetium and is suitable for radiotherapy because the {beta}-emitting radionuclides {sup 186}Re (t{sub 1/2} 90 h, E{sub {beta}} = 1.1 MeV, E{sub {gamma}} = 137 keV) and {sup 188}Re (t{sub 1/2} = 17 h, E{sub {beta}} = 2.1 MeV). The {gamma}-emission associated with decay of {sup 186}Re is also useful in scintigraphy. The research on {sup 186}Re radiopharmaceuticals at Radioisotope Production Center has been carried out since April 1997. Interest in radioimmunotherapy (RIT) led us to the development of labeling antibodies with rhenium isotopes. Although there are several methods for coupling radiometal to antibody, we prefer an indirect labeling method in which a bifunctional chelating agent is used for coupling of {sup 186}Re to monoclonal antibodies. In this report we outline the study on the preparation of {sup 186}Re DMSA-TFP as precursor for labeling with monoclonal antibody. (author)

  18. Present status of nuclear fusion research and development in JAERI. 1984 ed.

    International Nuclear Information System (INIS)

    1984-01-01

    This year is the 10th year in the ''Second stage nuclear fusion research and development project'', and the main plan to construct a critical plasma testing apparatus, JT-60, is about to be completed. The test of the power source and control system, and the assembling of the main body were finished, and the final general test is about to be started. In foreign countries, already experiment was begun with the TFTR and the JET, and the formation of the plasma at 20 million deg with the containment time of about 0.3 sec was accomplished. The results of heating experiment by incorporating heating devices are anxiously waited for. As the next generation projects, the conceptual design of the burning core experiment aiming at the attainment of self ignition condition was started in USA, and the next European torus is to be developed in EC before reaching the prototype DEMO. In Japan, it is intended to advanced to the attainment of self ignition condition and an experimental reactor for verifying nuclear fusion technology. In USSR, the construction of a superconducting tokamak T-15 is likely to be completed in 1986. The international cooperation is expected because of the financial condition of respective countries. (Kako, I.)

  19. Applied radiation chemistry - the present status in the Institute for Nuclear Research Academia Sinica (INRAS)

    International Nuclear Information System (INIS)

    Nian-yun, L.

    1981-01-01

    The department of radiation chemistry in INRAS is one of the research centers of radiation chemistry in China. Since its establishment in 1958, basic theoretical and applied radiation chemistry have been extensively studied and promoted. In the field of applied radiation chemistry of polymers, radiation modification of polymeric systems is an important and active branch. Materials such as permselective membranes based on different polymer films have been prepared by means of radiation crosslinking and grafting. Superfine powdered wax, which may be used for the preparation of special lubricating grease of high quality, has been obtained via radiation degradation of PTFE (polytetrafluoroethylene). As for applied organic radiation chemistry, the main technological conditions of preparation of alkane sulfonic acid by radiation sulphoxidation of n-paraffin were optimized and the radiation sensitization effects of halogenated alkane and acetic anhydride on the indicated system were studied. The radiation stability of linear conjugated molecules and the related effects of intra- and intermolecular radiation protection were particularly investigated. These studies are described. (author)

  20. Present status of research on and development of HTGR techniques in the People's Republic of China

    International Nuclear Information System (INIS)

    Zhu Yongjun

    1989-01-01

    China is a developing country rich in coal, petroleum and hydropower resources. In the past ten years, energy production in China has had a large increase, but along with the development of economy, energy demands increase even more rapidly. Many problems exist in China's energy system. Considering the large energy demand in the near future and long-term energy strategy, China has already decided to develop nuclear power gradually. The first several nuclear power stations are being and will be built in the South-east sea shore region. Two 900 MW PWRs (from France) and one 300 MW PWR (home made) are now under construction at Daya Bay (Kwangton Province) and Qin Shan (Zhejiang Province). The succeeding PWR power plants are being planned. PWR nuclear power station has been selected for the beginning of China's nuclear power plan. For large scale utilization of nuclear power in the next century, the development of advanced reactor type with good safety and economy performances and high uranium utilization rate (uranium resources in China is not rich enough) is strategically important. HTGR, due to its inherent safety characteristics, high heat efficiency, flexible fuel system and wide application fields, is a prospective advanced reactor type. Research and development on HTGR have already been included in China's national technical development program and are going on smoothly

  1. Salt Tolerance Research in Date Palm Tree (Phoenix dactylifera L., Past, Present and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Mahmoud W Yaish

    2015-05-01

    Full Text Available The date palm can adapt to extreme drought, to heat, and to relatively high levels of soil salinity. However, excessive amounts of salt due to irrigation with brackish water lead to a significant reduction in the productivity of the fruits as well as marked decrease in the viable numbers of the date palm trees. It is imperative that the nature of the existing salt adaptation mechanism be understood in order to develop future date palm varieties that can tolerate excessive soil salinity. In this perspective article, several research strategies, obstacles, and precautions are discussed in light of recent advancements accomplished in this field and the properties of this species. In addition to a physiological characterization, we propose the use of a full range of OMICS technologies, coupled with reverse genetics approaches, aimed towards understanding the salt-adaption mechanism in the date palm. Information generated by these analyses should highlight transcriptional and posttranscriptional modifications controlling the salt-adaptation mechanisms. As an extremophile with a natural tolerance for a wide range of abiotic stresses, the date palm may represent a treasure trove of novel genetic resources for salinity tolerance.

  2. Presentations of the CONRAD Research Symposium : oil sands water usage workshop

    International Nuclear Information System (INIS)

    2004-01-01

    This symposium provided a forum to exchange ideas regarding water use by the oil sands industry in Canada. The topics of discussion addressed timely issues such as corrosion control in pipelines, cumulative discharge modelling in the oil sands area, waste management schemes, the effects of potential limits on water withdrawal for thermal recovery operations and plant operations, the feasibility of geological sequestration of salts, and the impact of process-affected water on bitumen recovery. Other topics of discussion included tailings ponds management, deoxygenation of water, nanofiltration for water management, water quality for wetlands, water reuse, and water supply security. The conference featured 25 presentations, of which 17 have been indexed separately for inclusion in this database. tabs., figs

  3. Research on characteristics of Chinese language in the presentation of “Face”

    Directory of Open Access Journals (Sweden)

    Liu Lifang

    2016-01-01

    Full Text Available with the development of society, interpersonal relation has become more and more complicated. “Face” has been defined as “public self-image” and occupies a very important position in interpersonal communication. Therefore, this thesis mainly studies the characteristics of Chinese language in the presentation of “face”. At first, it referred to current situation of face studies overseas. It can be seen that the “defense-protect” face work theory proposed by Goffman is the important foundation for face problem studies under different angles in academic world. Then, it discussed identity theory based on social psychology in combination of our traditional culture. At last, it selected 85 groups of effective linguistic data according to characteristics of Chinese language; and studied face work. Moreover, it conducted questionnaire survey in combination of face work theory. Thus, it obtained the core factors of face and other important conclusions.

  4. Trends in international research presented through the Research Consortium of the American Alliance for Health, Physical Education, Recreation and Dance (1965-2008).

    Science.gov (United States)

    Cardinal, Bradley J; Powell, Felicity M; Lee, Miyoung

    2009-09-01

    The extent of international research on the Research Consortium's program between 1965 and 2008 was documented. A total of 9,132 abstracts were reviewed, and 657 (7.19%) had an international component. Inclusion of international research ranged from a low of 1.97% in 1983 to a high of 14.24% in 2007. There was a decrease in the amount of international research presented between 1965 and 1983, after which there was an increase through 2008. Most growth was from increased contributions coming from researchers in Southeast Asia. In terms of general research topics, eight areas increased over the 44-year history reviewed, and five areas decreased. Seven recommendations are advanced for expanding the place and role of international research within the Research Consortium.

  5. Decommissioning of the research nuclear reactor WWR-S Magurele - Bucharest. General presentation of the project

    International Nuclear Information System (INIS)

    Dragulescu, Emilian; Dragusin, Mitica; Popa, Victor; Boicu, Alin; Tuca, Carmen; Iorga, Ioan; Vrabie, Ionut; Mustata, Carmen

    2003-01-01

    A decommissioning project was worked out concerning the nuclear facility research reactor WWR-S Magurele-Bucharest to remove the radioactive and hazardous materials and so to exclude any risk for human health and environment. The project involves the four phases named assessment, development, operations and closeout. There are two major parts to the assesment phase: preliminary characterisation and the review and decision-making process. Characterisation is needed to develop project baseline data, which should include sufficient chemical, physical, and radiological characterisation to meet planning needs. Based on the conclusions of these studies, possible decommissioning alternative will be analyzed and: the best alternative chosen, final goal identified, risk assessments are evaluated. Also, taken into account are: regulations supporting assessment, land use considerations, financial concerns, disposal availability, public involvement, technology developments. After a decommissioning alternative was chosen, detailed engineering will begin following appropriate regulatory guidance. The plan will include characterisation information, namely: review of decommissioning alternatives; justification for the selected alternative; provision for regulatory compliance; predictions of personnel exposure, radioactive waste volume, and cost. Other activities are: scheduling, preparation for decommissioning operations; coordination, documentation, characterization report, feasibility studies, Decommissioning Plan, project daily report, radiological survey, airborne sampling records, termination survey of the site. The operations imply: identification and sequencing the operations on contaminated materials, storing on site the wastes, awaiting processing or disposal, and packaging of materials for transport to processing or disposal facilities.The key operations are: worker protection, health and safety program, review of planing work, work area assessment, work area controls

  6. Climate Change at the Poles: Research Immersion Experience at Bellingshausen, Antarctica

    Science.gov (United States)

    Alexeev, V. A.; Repina, I. A.; Baeseman, J. L.; Fernandoy, F.; Bart, S.

    2010-12-01

    We brought a party of 15 scientists, graduate students, and educators to King George Island, the largest of the South Shetland Islands, just off the Antarctic Peninsula, for an international workshop on Antarctica and global climate change in January 2010. Participants included professors, young scientists and graduate students from the Obukhov Institute of Atmospheric Physics, the University of Maryland, the University of Wisconsin, and the Michigan Technological University. Lindsay Bartholomew, an education and outreach specialist at the Museum of Science and Industry in Chicago connected the workshop via video and Internet with an audience of museum visitors. Scientists living and working at Bellingshausen, including Hans-Ulrich Peter, an eminent ecologist from Jena University (Germany), and Bulat Movlyudov (Institute of Geography, Moscow), a distinguished glaciologist, participated in the workshop. Field trips led by Peter and Movlyudov and others were made by day and lectures were held by night. Professors and graduate students made cutting-edge presentations on such subjects as permafrost, glaciology, and global climate models. Three workshop teams conducted field research projects at the foot of the Bellingshausen Dome icecap - two on carbon cycling and one on permafrost. Major funding sources for the workshop included the Russian Foundation for Basic Research (Russia), Wilderness Research Foundation (USA), NSF, University of Wisconsin at Stevens Point, Alfred Wegener Institute (Germany) and Museum for Science and Industry (Chicago). INACH, the Chilean Antarctic Institute, and IAU, the Uruguayan Antarctic Institute, provided air charter services. On King George Island, our group was billeted at Russia’s Bellingshausen science station.

  7. A Study of sensory and nutritional quality of virgin olive oil. Presentation of a European project of research

    Directory of Open Access Journals (Sweden)

    Esposito, Giovanni

    1994-04-01

    Full Text Available The purpose of this paper is to present, in a synthesis, the objectives and means of the FLAIR project on olive oil quality (FLAIR proposal N.- 89041, contract N° AGRF - GT91 - 0046. Comments are reported on the scientific assumptions and practical problems that have motivated this research. The participants are also presented with their roles and tasks in the project.

  8. The present state of research on the vitrification of concentrated solutions of fission products (1962)

    International Nuclear Information System (INIS)

    Bonniaud, R.; Sombret, C.

    1961-01-01

    The present report gives the actual point of studies on vitrification of concentrated solutions of fission products. An active cell, giving glasses in crucibles, permitted to study various glass compositions. The leaching rate from the glass raises 1 to 2 10 -7 g of glass/cm 2 /day. Activity loss by volatility during vitrification remains weak and often below 0.1 per cent of total activity. Off gas cleaning is made easier by presence of filter which is compound of granules including iron oxide. After saturation the content of this filter can be melt. Moreover different processes are in experimentation for a more important production. Daily 72 liters of solution containing tracer activity are treated in a continuous calcination and vitrification plant. The loss in 106 Ru is still important and a modification of installation has been necessary. A pot vitrification plant is in study. In order to reduce cost of processing the possibility to pour glass after melting is actuality in study. A production set of very active glass is also in project. (authors) [fr

  9. Characteristics of cancer patients presenting to an integrative medicine practice-based research network.

    Science.gov (United States)

    Edman, Joel S; Roberts, Rhonda S; Dusek, Jeffery A; Dolor, Rowena; Wolever, Ruth Q; Abrams, Donald I

    2014-09-01

    To assess psychosocial characteristics, symptoms and reasons for seeking integrative medicine (IM) care in cancer patients presenting to IM clinical practices. A survey of 3940 patients was conducted at 8 IM sites. Patient reported outcome measures were collected and clinicians provided health status data. This analysis compares 353 participants self-identified as cancer patients with the larger noncancer cohort. Mean age of the cancer cohort was 55.0 years. Participants were predominantly white (85.9%), female (76.4%), and well educated (80.5% completed college). For 15.2% of cancer patients, depression scores were consistent with depressive symptoms, and average scores for perceived stress were higher than normal, but neither were significantly different from noncancer patients. The most prevalent comorbid symptoms were chronic pain (39.8%), fatigue (33.5%), and insomnia (23.3%). In the cancer cohort, perceived stress was significantly associated with depression, fatigue, insomnia, pain, and QOL. Cancer patients who chose an IM clinical practice "seeking healthcare settings that address spirituality as an aspect of care" had significantly higher levels of perceived stress, depression, and pain than those not selecting this reason. Demographic characteristics, depression scores, perceived stress scores, and reasons for seeking integrative cancer care were not significantly different between cancer patients and noncancer patients. Perceived stress may be an important indicator of QOL. The association of perceived stress, depression and pain with seeking spirituality suggests that providing IM interventions, such as effective stress management techniques and pastoral or spiritual counseling, may be helpful to patients living with cancer. © The Author(s) 2014.

  10. USGS research on geohazards of the North Pacific: past, present, and future

    Science.gov (United States)

    McNutt, M. K.; Eichelberger, J. C.

    2012-12-01

    The disastrous earthquakes and tsunamis of Sumatra in 2004 and Tohoku in 2011 have driven re-examination of where and how such events occur. Particular focus is on the North Pacific. Of the top 30 earthquakes recorded instrumentally worldwide, 50% occurred along the line of subduction from the Kuril Islands to the southern Alaska mainland. This region has seen monstrous volcanic eruptions (Katmai-Novarupta, 1912), destructive tsunamis (Severo-Kurilsk, 1952), and one of Earth's largest instrumentally-recorded earthquakes (M9.2 Alaska, 1964). Only the modest populations in these frontier towns half a century ago kept losses to a minimum. Impact of any natural disaster to population, vital infrastructure, and sea and air transportation would be magnified today. While USGS had a presence in Alaska for more than a century, the great Alaska earthquake of 1964 ushered in the first understanding of the area's risks. This was the first mega-thrust earthquake properly interpreted as such, and led to re-examination of the 1960 Chilean event. All modern conceptions of mega-thrust earthquakes and tsunamis derive some heritage from USGS research following the 1964 event. The discovery of oil in the Alaska Arctic prompted building a pipeline from the north slope of Alaska to the ice-free port of Valdez. The USGS identified risks from crossing permafrost and active faults. Accurate characterization of these hazards informed innovative designs that kept the pipeline from rupturing due to ground instability or during the M7.9 Denali earthquake of 2002. As a large state with few roads, air travel is common in Alaska. The frequent ash eruptions of volcanoes in the populous Cook Inlet basin became a serious issue, highlighted by the near-crash of a large passenger jet in 1989. In response, the USGS and its partners developed and deployed efficient seismic networks on remote volcanoes and initiated regular satellite surveillance for early warning of ash eruptions. Close collaboration

  11. Advances in discrete tomography and its applications

    CERN Document Server

    Kuba, Attila; Kuba, Attila

    2007-01-01

    The book provides a unified presentation of new methods, algorithms, and select applications that are the foundations of multidimensional image construction and reconstruction. The self-contained survey chapters present cutting-edge research and results in the field.

  12. Computer science, biology and biomedical informatics academy: outcomes from 5 years of immersing high-school students into informatics research

    Directory of Open Access Journals (Sweden)

    Andrew J King

    2017-01-01

    Full Text Available The University of Pittsburgh's Department of Biomedical Informatics and Division of Pathology Informatics created a Science, Technology, Engineering, and Mathematics (STEM pipeline in 2011 dedicated to providing cutting-edge informatics research and career preparatory experiences to a diverse group of highly motivated high-school students. In this third editorial installment describing the program, we provide a brief overview of the pipeline, report on achievements of the past scholars, and present results from self-reported assessments by the 2015 cohort of scholars. The pipeline continues to expand with the 2015 addition of the innovation internship, and the introduction of a program in 2016 aimed at offering first-time research experiences to undergraduates who are underrepresented in pathology and biomedical informatics. Achievements of program scholars include authorship of journal articles, symposium and summit presentations, and attendance at top 25 universities. All of our alumni matriculated into higher education and 90% remain in STEM majors. The 2015 high-school program had ten participating scholars who self-reported gains in confidence in their research abilities and understanding of what it means to be a scientist.

  13. Computer Science, Biology and Biomedical Informatics academy: Outcomes from 5 years of Immersing High-school Students into Informatics Research.

    Science.gov (United States)

    King, Andrew J; Fisher, Arielle M; Becich, Michael J; Boone, David N

    2017-01-01

    The University of Pittsburgh's Department of Biomedical Informatics and Division of Pathology Informatics created a Science, Technology, Engineering, and Mathematics (STEM) pipeline in 2011 dedicated to providing cutting-edge informatics research and career preparatory experiences to a diverse group of highly motivated high-school students. In this third editorial installment describing the program, we provide a brief overview of the pipeline, report on achievements of the past scholars, and present results from self-reported assessments by the 2015 cohort of scholars. The pipeline continues to expand with the 2015 addition of the innovation internship, and the introduction of a program in 2016 aimed at offering first-time research experiences to undergraduates who are underrepresented in pathology and biomedical informatics. Achievements of program scholars include authorship of journal articles, symposium and summit presentations, and attendance at top 25 universities. All of our alumni matriculated into higher education and 90% remain in STEM majors. The 2015 high-school program had ten participating scholars who self-reported gains in confidence in their research abilities and understanding of what it means to be a scientist.

  14. Profiling clinical cancer research across the Atlantic: a review of research and its characteristics presented at ASCO and ESMO Congresses during the last decade.

    Science.gov (United States)

    Pentheroudakis, George; Krikelis, Dimitrios; Cervantes, Andres; Vermorken, Jan; Pavlidis, Nicholas

    2012-10-01

    The comparison of clinical cancer research characteristics across the Atlantic and their evolution over time have not been studied to date. We collected oral presentations on breast, lung and colorectal cancer at ASCO (n=506) and ESMO (n=239) Congresses in years 2000-2010. EU-originated research constituted 52% of all ASCO presentations while US-research 26.7% of ESMO Congress presentations. Industry sponsorship was reported in 24.8% of ASCO vs. 31.8% of ESMO Congress trials. ASCO-presented trials were larger with longer follow-up periods but were blinded less often. ESMO-presented trials used Event-Free Survival (EFS, 38.1%) and Surrogate (18.4%) primary endpoints and reported positive primary endpoints (65%) more often than ASCO-presented trials. Interim analysis resulted in discontinuation of a trial more often at ASCO Congress (8.3% vs. 3.2%). ASCO Congress-presented research was more often published (69.2% vs. 59.8% at ESMO) at higher impact factor journals. Strong trends over the decade were seen for more frequent industry sponsorship, blinded design, larger sample size, early interim discontinuation, use of EFS endpoints and biomarker evaluation. Cancer clinical research is a complex scientific activity with common global but also distinct characteristics at the two sides of the Atlantic. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. ORIGINAL RESEARCH PRESENTATIONS

    African Journals Online (AJOL)

    implicated in home deliveries and high maternal mortality in ... complications which may result in death. Home delivery may only be possible in uncomplicated labours, once there are complications; these mothers need to be referred immediately to a nearby health .... Still birth related to ritual broken by a woman during.

  16. Bioprinting for cancer research.

    Science.gov (United States)

    Knowlton, Stephanie; Onal, Sevgi; Yu, Chu Hsiang; Zhao, Jean J; Tasoglu, Savas

    2015-09-01

    Bioprinting offers the ability to create highly complex 3D architectures with living cells. This cutting-edge technique has significantly gained popularity and applicability in several fields. Bioprinting methods have been developed to effectively and rapidly pattern living cells, biological macromolecules, and biomaterials. These technologies hold great potential for applications in cancer research. Bioprinted cancer models represent a significant improvement over previous 2D models by mimicking 3D complexity and facilitating physiologically relevant cell-cell and cell-matrix interactions. Here we review bioprinting methods based on inkjet, microextrusion, and laser technologies and compare 3D cancer models with 2D cancer models. We discuss bioprinted models that mimic the tumor microenvironment, providing a platform for deeper understanding of cancer pathology, anticancer drug screening, and cancer treatment development. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. From English to Chinese, Japanese, and Russian: extending research visibility with language translations of a conference slide presentation

    Directory of Open Access Journals (Sweden)

    Lilian Hoffecker, PhD, MLS

    2017-01-01

    Conclusions: Language translation can be a difficult and time-consuming task. However, translation of a conference slide presentation with limited text is an achievable activity and engages an international audience for information that is often not noticed or lost. Although English is by far the primary language of science and other disciplines, it is not necessarily the first or preferred language of global researchers. By offering appropriate language versions, the authors of presentations can expand the reach of their work.

  18. PREFACE: International Scientific and Research Conference on Topical Issues in Aeronautics and Astronautics (dedicated to the 55th anniversary from the foundation of SibSAU)

    Science.gov (United States)

    2015-10-01

    The International Scientific and Research Conference ''Topical Issues in Aeronautics and Astronautics'' is one of the most significant scientific conferences arranged by the Reshetnev Siberian State Aerospace University (SibSAU) which is located in the Krasnoyarsk Region of Russian Federation. In April 2015 this Conference was dedicated to the 55th anniversary from the foundation of the University. Traditionally, the Conference is seen as emblematic of the University's specialty and is annually organized in April, when the first human travelled into space. This Conference is arranged for undergraduate, graduate and postgraduate students, scientists and lecturers, as well as developers, designers and constructors representing leading companies and enterprises of the aerospace sector to give opportunities to present their projects, research work and results. The Conference is a great chance to connect scientists and highly-qualified and skilled specialists with a new community of future scientists and practitioners in the aerospace sector. The Conference proceedings include papers presented by creative young specialists closely connected with aviation and space vehicles - design, production, problem-solving in space machine building and aerospace education, macro- and microeconomic development of the field, new approaches to solving philosophical and social problems, - experienced scientists and specialists, and all those who want to dedicate themselves to aeronautics and astronautics. The selected papers are presented in these proceedings to share University research results, innovations and cutting-edge technologies with the international community to develop aeronautics and astronautics on a global scale.

  19. Colloborative International Resesarch on the Water Energy Nexus: Lessons Learned from the Clean Energy Research Center - Water Energy Technologies (CERC-WET)

    Science.gov (United States)

    Remick, C.

    2017-12-01

    The U.S.-China Clean Energy Research Center - Water and Energy Technologies (CERC-WET) is a global research partnership focused on developing and deploying technologies that to allow the U.S. and China to thrive in a future with constrained energy and water resources in a changing global climate. This presentation outlines and addresses the opportunities and challenges for international research collaboration on the so called "water-energy nexus", with a focus on industrial partnership, market readiness, and intellectual property. The U.S. Department of Energy created the CERC program as a research and development partnership between the United States and China to accelerate the development and deployment of advanced clean energy technologies. The United States and China are not only the world's largest economies; they are also the world's largest energy producers and energy consumers. Together, they account for about 40% of annual global greenhouse gas emissions. The bilateral investment in CERC-WET will total $50 million over five years and will target on the emerging issues and cut-edge research on the topics of (1) water use reduction at thermoelectric plants; (2) treatment and management of non-traditional waters; (3) improvements in sustainable hydropower design and operation; (4) climate impact modeling, methods, and scenarios to support improved understanding of energy and water systems; and (5) data and analysis to inform planning and policy.

  20. 17th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2016)

    International Nuclear Information System (INIS)

    2016-01-01

    Preface The 2016 version of the International Workshop on Advanced Computing and Analysis Techniques in Physics Research took place on January 18-22, 2016, at the Universidad Técnica Federico Santa Maria -UTFSM- in Valparaiso, Chile. The present volume of IOP Conference Series is devoted to the selected scientific contributions presented at the workshop. In order to guarantee the scientific quality of the Proceedings all papers were thoroughly peer-reviewed by an ad-hoc Editorial Committee with the help of many careful reviewers. The ACAT Workshop series has a long tradition starting in 1990 (Lyon, France), and takes place in intervals of a year and a half. Formerly these workshops were known under the name AIHENP (Artificial Intelligence for High Energy and Nuclear Physics). Each edition brings together experimental and theoretical physicists and computer scientists/experts, from particle and nuclear physics, astronomy and astrophysics in order to exchange knowledge and experience in computing and data analysis in physics. Three tracks cover the main topics: Computing technology: languages and system architectures. Data analysis: algorithms and tools. Theoretical Physics: techniques and methods. Although most contributions and discussions are related to particle physics and computing, other fields like condensed matter physics, earth physics, biophysics are often addressed in the hope to share our approaches and visions. It created a forum for exchanging ideas among fields, exploring and promoting cutting-edge computing technologies and debating hot topics. (paper)

  1. Global Trends and Research Aims for English Academic Oral Presentations: Changes, Challenges, and Opportunities for Learning Technology

    Science.gov (United States)

    Barrett, Neil E.; Liu, Gi-Zen

    2016-01-01

    English has become the de facto language for communication in academia in many parts of the world, but English language learners often lack the language resources to make effective oral academic presentations. However, English for academic purposes (EAP) research is beginning to provide valuable insights into this emerging field. This literature…

  2. Adapting a MOOC for Research: Lessons Learned from the First Presentation of "Literature and Mental Health: Reading for Wellbeing"

    Science.gov (United States)

    Hodge, Rachael

    2016-01-01

    The University of Warwick's FutureLearn MOOC "Literature and Mental Health: Reading for Wellbeing," which began its first presentation February 2016, was identified as an opportunity to conduct some research into the course subject area, "reading for wellbeing" or "bibliotherapy". Since 2013, a substantial body of…

  3. 34 CFR 97.405 - Research involving greater than minimal risk but presenting the prospect of direct benefit to the...

    Science.gov (United States)

    2010-07-01

    ... presenting the prospect of direct benefit to the individual subjects. 97.405 Section 97.405 Education Office... the prospect of direct benefit to the individual subjects. ED conducts or funds research in which the... holds out the prospect of direct benefit for the individual subject, or by a monitoring procedure that...

  4. Smarter energy from smart metering to the smart grid

    CERN Document Server

    Sun, Hongjian; Poor, H Vincent; Carpanini, Laurence; Fornié, Miguel Angel Sánchez

    2016-01-01

    This book presents cutting-edge perspectives and research results in smart energy spanning multiple disciplines across four main topics: smart metering, smart grid modeling, control and optimisation, and smart grid communications and networking.

  5. Information on research in progress in Japan publication of 'Nuclear Science Information of Japan-Oral Presentation'

    International Nuclear Information System (INIS)

    Itabashi, Keizo; Nakajima, Hidemitsu; Yokoo, Hiroshi

    1988-01-01

    The new journal, 'Nuclear Science Information of Japan-Oral Presentation', which was entirely revised from the previous abstract journal called 'Nuclear Science Information of Japan' was introduced. This is to be published quaterly in principle and compiled information by oral presentation presented at main conferences, symposia and other kind of formal meetings in the field of nuclear science and technology in Japan. Not all of the oral presentation is always contributed later to a proceeding or a journal as a full paper in Japan. In some cases, the pre-conference paper might be a only publication of the oral presentation. In this meaning, this journal could be used as a search tool for the subjects and the projects of nuclear research and development in progress. (author)

  6. 2010 Gordon Research Conference On Radiation Chemistry

    International Nuclear Information System (INIS)

    Orlando, Thomas

    2010-01-01

    The 2010 Gordon Conference on Radiation Chemistry will present cutting edge research regarding the study of radiation-induced chemical transformations. Radiation Chemistry or 'high energy' chemistry is primarily initiated by ionizing radiation: i.e. photons or particles with energy sufficient to create conduction band electrons and 'holes', excitons, ionic and neutral free radicals, highly excited states, and solvated electrons. These transients often interact or 'react' to form products vastly different than those produced under thermal equilibrium conditions. The non-equilibrium, non-thermal conditions driving radiation chemistry exist in plasmas, star-forming regions, the outer solar system, nuclear reactors, nuclear waste repositories, radiation-based medical/clinical treatment centers and in radiation/materials processing facilities. The 2010 conference has a strong interdisciplinary flavor with focus areas spanning (1) the fundamental physics and chemistry involved in ultrafast (atto/femtosecond) energy deposition events, (2) radiation-induced processes in biology (particularly spatially resolved studies), (3) radiation-induced modification of materials at the nanoscale and cosmic ray/x-ray mediated processes in planetary science/astrochemistry. While the conference concentrates on fundamental science, topical applied areas covered will also include nuclear power, materials/polymer processing, and clinical/radiation treatment in medicine. The Conference will bring together investigators at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present work in poster format or as contributors to the Young Investigator session. The program and format provides excellent avenues to promote cross-disciplinary collaborations.

  7. "Frank" presentations as a novel research construct and element of diagnostic decision-making in autism spectrum disorder.

    Science.gov (United States)

    de Marchena, Ashley; Miller, Judith

    2017-04-01

    Many individuals with ASD have a distinctive behavioral presentation that is recognizable within moments, a phenomenon we call "frank" ASD. This phenomenon has been discussed informally for decades, perhaps as "classic" ASD; however, there is no unitary "classic" presentation, and classic autism does not seem to correspond to level of functioning. Thus, neither "frank" nor "classic" autism has been delineated or studied as a research construct. To initiate the empirical study of frank ASD, we surveyed 151 clinicians, from a range of disciplines that diagnose ASD, about this phenomenon. Respondents completed a 13-item questionnaire about frank ASD, which was analyzed using a mixed-methods approach. Ninety-seven percentage of respondents were familiar with the phenomenon. Respondents estimated that 40% of the ASD population has a frank presentation. Respondents reported the most highly specific behaviors associated with frank presentations were a general sense of impaired reciprocity, quality of eye contact, atypical vocal prosody, presence of motor mannerisms, and atypical gait or posture. In general, respondents reported detecting frank features rapidly, with the majority forming their impressions within the first ten minutes of interaction or observation. Although unstudied empirically, "frank" presentations of ASD are familiar to diagnosing clinicians, and appear to be based on behaviors both central to ASD diagnostic criteria (e.g., impaired reciprocity), and absent from diagnostic criteria (e.g., atypical gait or posture). We discuss these findings within the context of diagnostic decision-making and behavioral phenotyping of ASD. Autism Res 2016,. © 2016 International Society for Autism Research, Wiley Periodicals, Inc. Autism Res 2017, 10: 653-662. © 2016 International Society for Autism Research, Wiley Periodicals, Inc. © 2016 International Society for Autism Research, Wiley Periodicals, Inc.

  8. The new large-scale international facility for antiproton and ion research in Europe, FAIR

    International Nuclear Information System (INIS)

    Rosner, Guenther

    2012-01-01

    Full text: FAIR is currently the largest project in nuclear and particle physics worldwide, with investment costs of 1.6B euro in its first phase. It has been founded by Finland, France, Germany, India, Poland, Romania, Russia, Slovenia and Sweden in Oct. 2010. The facility will provide the international scientific community with a unique and technically innovative particle accelerator system to perform cutting-edge research in the sciences concerned with the basic structure of matter in: nuclear and particle physics, atomic and anti-matter physics, high density plasma physics, and applications in condensed matter physics, biology and the bio-medical sciences. The work horse of FAIR will be a 1.1 km circumference double ring of rapidly cycling 100 and 300 Tm synchrotrons, which will be used to produce high intensity secondary beams of anti-protons and very short-lived radioactive ions. A subsequent suite of cooler and storage rings will deliver anti-proton and heavy-ion beams of unprecedented quality regarding intensity and resolution. Large experimental facilities are presently being prototyped by the APPA, CBM, NuSTAR and PANDA Collaborations to be used by a global community of more than 3000 scientists from 2018. (author)

  9. Brain-computer interface research a state-of-the-art summary 3

    CERN Document Server

    Guger, Christoph; Allison, Brendan

    2014-01-01

    This book provides a cutting-edge overview of the latest developments in Brain-Computer-Interfaces (BCIs), reported by leading research groups. As the reader will discover, BCI research is moving ahead rapidly, with many new ideas, research initiatives, and improved technologies, e.g. BCIs that enable people to communicate just by thinking - without any movement at all. Several different groups are helping severely disabled users communicate using BCIs, and BCI technology is also being extended to facilitate recovery from stroke, epilepsy, and other conditions. Each year, hundreds of the top

  10. Presentation of a Novel Model for Evaluation of Commercialization of Research and Development: Case Study of the Pharmaceutical Biotechnology Industry.

    Science.gov (United States)

    Emami, Hassan; Radfar, Reza

    2017-01-01

    The current situation in Iran suggests an appropriate basis for developing biotechnology industries, because the patents for the majority of hi-tech medicines registered in developed countries are ending. Biosimilar and technology-oriented companies which do not have patents will have the opportunity to enter the biosimilar market and move toward innovative initiatives. The present research proposed a model by which one can evaluate commercialization of achievements obtained from research with a focus on the pharmaceutical biotechnology industry. This is a descriptive-analytic study where mixed methodology is followed by a heuristic approach. The statistical population was pharmaceutical biotechnology experts at universities and research centers in Iran. Structural equations were employed in this research. The results indicate that there are three effective layers within commercialization in the proposed model. These are a general layer (factors associated with management, human capital, legal infrastructure, communication infrastructure, a technical and executive infrastructures, and financial factors), industrial layer (internal industrial factors and pharmaceutical industry factors), and a third layer that included national and international aspects. These layers comprise 6 domains, 21 indices, 41 dimensions, and 126 components. Compilation of these layers (general layer, industrial layer, and national and international aspects) can serve commercialization of research and development as an effective evaluation package.

  11. High Temperature Superconductors: From Delivery to Applications (Presentation from 2011 Ernest Orlando Lawrence Award-winner, Dr. Amit Goyal, and including introduction by Energy Secretary, Dr. Steven Chu)

    International Nuclear Information System (INIS)

    Goyal, Amit

    2012-01-01

    Dr. Amit Goyal, a high temperature superconductivity (HTS) researcher at Oak Ridge National Laboratory, was named a 2011 winner of the Department of Energy's Ernest Orlando Lawrence Award honoring U.S. scientists and engineers for exceptional contributions in research and development supporting DOE and its mission. Winner of the award in the inaugural category of Energy Science and Innovation, Dr. Goyal was cited for his work in 'pioneering research and transformative contributions to the field of applied high temperature superconductivity, including fundamental materials science advances and technical innovations enabling large-scale applications of these novel materials.' Following his basic research in grain-to-grain supercurrent transport, Dr. Goyal focused his energy in transitioning this fundamental understanding into cutting-edge technologies. Under OE sponsorship, Dr. Goyal co-invented the Rolling Assisted Bi-Axially Textured Substrate technology (RABiTS) that is used as a substrate for second generation HTS wires. OE support also led to the invention of Structural Single Crystal Faceted Fiber Substrate (SSIFFS) and the 3-D Self Assembly of Nanodot Columns. These inventions and associated R and D resulted in 7 R and D 100 Awards including the 2010 R and D Magazine's Innovator of the Year Award, 3 Federal Laboratory Consortium Excellence in Technology Transfer National Awards, a DOE Energy100 Award and many others. As a world authority on HTS materials, Dr. Goyal has presented OE-sponsored results in more than 150 invited talks, co-authored more than 350 papers and is a fellow of 7 professional societies.

  12. Accepted standards on how to give a Medical Research Presentation: a systematic review of expert opinion papers

    Directory of Open Access Journals (Sweden)

    Blome, Christine

    2017-02-01

    Full Text Available Background: This systematic review aimed to extract recommendations from expert opinion articles on how to give a medical research presentation on a scientific conference and to determine whether the experts agree on what makes an effective or poor presentation. Methods: Presentation-related terms were searched within article titles listed in PubMed, restricting the search to English-language articles published from January 1975 to July 2015. Recommendations were extracted from the articles, grouped by content, and analyzed for frequency. Ninety-one articles were included. Among 679 different recommendations, 29 were given in more than 20% of articles each. The five most frequent recommendations were to keep slides simple, adjust the talk to the audience, rehearse, not read the talk from slides or a manuscript, and make eye contact. Results: No article gave advice that was the complete opposite of the 29 most frequent recommendations with the exception of whether a light or dark background should be used for slides. Conclusions: Researchers should comply with these widely accepted standards to be perceived as effective presenters.

  13. Accepted standards on how to give a Medical Research Presentation: a systematic review of expert opinion papers.

    Science.gov (United States)

    Blome, Christine; Sondermann, Hanno; Augustin, Matthias

    2017-01-01

    Background: This systematic review aimed to extract recommendations from expert opinion articles on how to give a medical research presentation on a scientific conference and to determine whether the experts agree on what makes an effective or poor presentation. Methods: Presentation-related terms were searched within article titles listed in PubMed, restricting the search to English-language articles published from January 1975 to July 2015. Recommendations were extracted from the articles, grouped by content, and analyzed for frequency. Ninety-one articles were included. Among 679 different recommendations, 29 were given in more than 20% of articles each. The five most frequent recommendations were to keep slides simple, adjust the talk to the audience, rehearse, not read the talk from slides or a manuscript, and make eye contact. Results: No article gave advice that was the complete opposite of the 29 most frequent recommendations with the exception of whether a light or dark background should be used for slides. Conclusions: Researchers should comply with these widely accepted standards to be perceived as effective presenters.

  14. From English to Chinese, Japanese, and Russian: extending research visibility with language translations of a conference slide presentation.

    Science.gov (United States)

    Hoffecker, Lilian; Abbey, Dana

    2017-01-01

    The research demonstrates that a conference slide presentation translated into non-English languages reaches significantly larger and different audiences than an English presentation alone. The slides of a presentation from the Medical Library Association annual meeting were translated from English to Chinese, Japanese, and Russian and posted along with the English version to SlideShare, an open slide-hosting website. View counts, traffic sources, and geographic origins of the traffic for each language version were tracked over a twenty-two-month period. Total view counts for all 4 language versions amounted to 3,357 views, with the Chinese version accounting for 71% of the total views. The trends in view counts over time for the Japanese, Russian, and English versions were similar, with high interest at the beginning and a rapid drop and low level of viewing activity thereafter. The pattern of view counts for the Chinese version departed considerably from the other language versions, with very low activity at the beginning but a sharp rise 10 months later. This increase in activity was related to access to the presentations via a Taiwanese website that embedded the SlideShare website code. Language translation can be a difficult and time-consuming task. However, translation of a conference slide presentation with limited text is an achievable activity and engages an international audience for information that is often not noticed or lost. Although English is by far the primary language of science and other disciplines, it is not necessarily the first or preferred language of global researchers. By offering appropriate language versions, the authors of presentations can expand the reach of their work.

  15. Past, Present, and Future of Informed Consent in Pain and Genomics Research: Challenges Facing Global Medical Community.

    Science.gov (United States)

    Compagnone, Christian; Schatman, Michael E; Rauck, Richard L; Van Zundert, Jan; Kraus, Monika; Primorac, Dragan; Williams, Frances; Allegri, Massimo; Saccani Jordi, Gloria; Fanelli, Guido

    2017-01-01

    In recent decades, there has been a revision of the role of institutional review boards with the intention of protecting human subjects from harm and exploitation in research. Informed consent aims to protect the subject by explaining all of the benefits and risks associated with a specific research project. To date, there has not been a review published analyzing issues of informed consent in research in the field of genetic/Omics in subjects with chronic pain, and the current review aims to fill that gap in the ethical aspects of such investigation. Despite the extensive discussion on ethical challenges unique to the field of genetic/Omics, this is the first attempt at addressing ethical challenges regarding Informed Consent Forms for pain research as the primary focus. We see this contribution as an important one, for while ethical issues are too often ignored in pain research in general, the numerous arising ethical issues that are unique to pain genetic/Omics suggest that researchers in the field need to pay even greater attention to the rights of subjects/patients. This article presents the work of the Ethic Committee of the Pain-Omics Group (www.painomics.eu), a consortium of 11 centers that is running the Pain-Omics project funded by the European Community in the 7th Framework Program theme (HEALTH.2013.2.2.1-5-Understanding and controlling pain). The Ethic Committee is composed of 1 member of each group of the consortium as well as key opinion leaders in the field of ethics and pain more generally. © 2016 The Authors. Pain Practice published by Wiley Periodicals, Inc. on behalf of World Institute of Pain.

  16. Transforming Research in Oceanography through Education, Ethnography and Rapidly Evolving Technologies: An NSF-INSPIRE project.

    Science.gov (United States)

    German, C. R.; Croff Bell, K. L.; Pallant, A.; Mirmalek, Z.; Jasanoff, S.; Rajan, K.

    2014-12-01

    This paper will discuss a new NSF-INSPIRE project that brings together research conducted in the fields of Ocean Sciences, Education & Human Resources and Computer and Information Science & Engineering. Specifically, our objective is to investigate new methods by which telepresence can be used to conduct cutting edge research and provide authentic educational experiences to undergraduate students, remotely. We choose to conduct this research in an Oceanographic context for two reasons: first with the move toward smaller research ships in the national Oceanographic research fleet, we anticipate that access to berth space at sea will continue to be at a premium. Any component of traditional oceanographic research that can be ported to shore without loss of effectiveness would be of immediate benefit to the Ocean Sciences. Equally, however, we argue that any improvements to work place and/or education practices that we can identify while delivering research and education from the bottom of the deep ocean should be readily mappable to any other scientific or engineering activities that seek to make use of telepresence in less extreme remote environments. Work on our TREET project, to-date, has included recruitment of 6 early career scientists keen to take advantage of the research opportunity provided, together with two senior science mentors with experience using Telepresence and a cohort of undergraduate students at three of the ECS partner Universities, spanning 4 time zones across the continental US. Following a 12-week synchronous on-line seminar series taught in Spring-Summer 2014, the entire team joined together at the Inner Space Center in Sept-Oct 2014 to participate, virtually, in a cruise of research and exploration to the Kick'Em Jenny underwater volcano and adjacent cold seep sites, conducted by the Ocean Exploration Trust's ROV Hercules aboard the Exploration Vessel Nautilus. Our presentation will include preliminary results from that cruise.

  17. The 17-orbit microtron from the Institute of Atomic Physics - Bucharest. Research work performed from 1977 up to present

    International Nuclear Information System (INIS)

    Catana, D.; Axinescu, S.; Minea, R.

    1992-01-01

    The 17-orbit microtron from the Institute of Atomic Physics, Bucharest, Romania, is described. It is a machine with a 11 MeV energy (first regime of acceleration) and 16 MeV energy (second regime of acceleration). The pulse beam power is about 400 kw with a duty ratio of 10 -3 . The parameters of the microtron are presented. The microtron was used in many fields such as: non-destructive testing, activation analysis, semiconductor irradiation. Research an photonuclear reactions, study of uranium and thorium photo-fission were also performed using this microtron. (Author)

  18. Reading, Writing, and Presenting Original Scientific Research: A Nine-Week Course in Scientific Communication for High School Students†

    Science.gov (United States)

    Danka, Elizabeth S.; Malpede, Brian M.

    2015-01-01

    High school students are not often given opportunities to communicate scientific findings to their peers, the general public, and/or people in the scientific community, and therefore they do not develop scientific communication skills. We present a nine-week course that can be used to teach high school students, who may have no previous experience, how to read and write primary scientific articles and how to discuss scientific findings with a broad audience. Various forms of this course have been taught for the past 10 years as part of an intensive summer research program for rising high school seniors that is coordinated by the Young Scientist Program at Washington University in St. Louis. The format presented here includes assessments for efficacy through both rubric-based methods and student self-assessment surveys. PMID:26753027

  19. Graphics supercomputer for computational fluid dynamics research

    Science.gov (United States)

    Liaw, Goang S.

    1994-11-01

    The objective of this project is to purchase a state-of-the-art graphics supercomputer to improve the Computational Fluid Dynamics (CFD) research capability at Alabama A & M University (AAMU) and to support the Air Force research projects. A cutting-edge graphics supercomputer system, Onyx VTX, from Silicon Graphics Computer Systems (SGI), was purchased and installed. Other equipment including a desktop personal computer, PC-486 DX2 with a built-in 10-BaseT Ethernet card, a 10-BaseT hub, an Apple Laser Printer Select 360, and a notebook computer from Zenith were also purchased. A reading room has been converted to a research computer lab by adding some furniture and an air conditioning unit in order to provide an appropriate working environments for researchers and the purchase equipment. All the purchased equipment were successfully installed and are fully functional. Several research projects, including two existing Air Force projects, are being performed using these facilities.

  20. Inside CERN European Organization for Nuclear Research

    CERN Document Server

    Pol, Andri; Heuer, Rolf

    2013-01-01

    For most people locations that hold a particular importance for the development of our society and for the advancement of science and technology remain hidden from view. CERN, the European Organization for Nuclear Research, is best known for its giant particle accelerator. Here researchers take part in a diverse array of fundamental physical research, in the pursuit of knowledge that will perhaps one dayrevolutionize our understanding of the universe and life on our planet. The Swiss photographer Andri Pol mixed with this multicultural community of researchers and followed their work over an extended period of time. In doing so he created a unique portrait of this fascinating “underworld.” The cutting-edge research is given a human face and the pictures allow us to perceive how in this world of the tiniest particles the biggest connections are searched for. With an essay by Peter Stamm.

  1. Conference presentation to publication: a retrospective study evaluating quality of abstracts and journal articles in medical education research.

    Science.gov (United States)

    Stephenson, Christopher R; Vaa, Brianna E; Wang, Amy T; Schroeder, Darrell R; Beckman, Thomas J; Reed, Darcy A; Sawatsky, Adam P

    2017-11-09

    There is little evidence regarding the comparative quality of abstracts and articles in medical education research. The Medical Education Research Study Quality Instrument (MERSQI), which was developed to evaluate the quality of reporting in medical education, has strong validity evidence for content, internal structure, and relationships to other variables. We used the MERSQI to compare the quality of reporting for conference abstracts, journal abstracts, and published articles. This is a retrospective study of all 46 medical education research abstracts submitted to the Society of General Internal Medicine 2009 Annual Meeting that were subsequently published in a peer-reviewed journal. We compared MERSQI scores of the abstracts with scores for their corresponding published journal abstracts and articles. Comparisons were performed using the signed rank test. Overall MERSQI scores increased significantly for published articles compared with conference abstracts (11.33 vs 9.67; P quality of medical education abstracts and journal articles using the MERSQI. Overall, the quality of articles was greater than that of abstracts. However, there were no significant differences between abstracts and articles for the domains of study design and outcomes, which indicates that these MERSQI elements may be applicable to abstracts. Findings also suggest that abstract quality is generally preserved from original presentation to publication.

  2. 2011 Photosynthesis Gordon Research Conference & Seminar (June 11-17, 2011, Davidson College, Davidson, North Carolina)

    Energy Technology Data Exchange (ETDEWEB)

    Prof. Krishna Niyogi

    2011-06-17

    Photosynthesis is the biological process that converts solar energy into chemical energy. Elucidation of the mechanisms of photosynthetic energy conversion at a molecular level is fundamentally important for understanding the biology of photosynthetic organisms, for optimizing biological solar fuels production, and for developing biologically inspired approaches to solar energy conversion. The 2011 Gordon Conference on Photosynthesis will present cutting-edge research focusing on the biochemical aspects of photosynthesis, including: (1) structure, assembly, and function of photosynthetic complexes; (2) the mechanism of water splitting by PSII; (3) light harvesting and quenching; (4) alternative electron transport pathways; (5) biosynthesis of pigments and cofactors; and (6) improvement of photosynthesis for bioenergy and food production. Reflecting the interdisciplinary nature of photosynthesis research, a diverse group of invited speakers will represent a variety of scientific approaches to investigate photosynthesis, such as biochemistry, molecular genetics, structural biology, systems biology, and spectroscopy. Highly interactive poster sessions provide opportunities for graduate students and postdocs to present their work and exchange ideas with leaders in the field. One of the highlights of the Conference is a session featuring short talks by junior investigators selected from the poster presentations. The collegial atmosphere of the Photosynthesis GRC, with programmed discussion sessions as well as informal gatherings in the afternoons and evenings, enables participants to brainstorm, exchange ideas, and forge new collaborations. For the second time, this Conference will be immediately preceded by a Gordon Research Seminar on Photosynthesis (June 11-12, 2011, at the same location), with a focus on 'Photosynthesis, Bioenergy, and the Environment.' The GRS provides an additional opportunity for graduate students and postdocs to present their research

  3. Information Presentation

    Science.gov (United States)

    Holden, K.L.; Boyer, J.L.; Sandor, A.; Thompson, S.G.; McCann, R.S.; Begault, D.R.; Adelstein, B.D.; Beutter, B.R.; Stone, L.S.

    2009-01-01

    The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. The major areas of work, or subtasks, within this DRP are: 1) Displays, 2) Controls, 3) Electronic Procedures and Fault Management, and 4) Human Performance Modeling. This DRP is a collaborative effort between researchers at Johnson Space Center and Ames Research Center.

  4. NSERC's research and industrial community: a growing force of discovery, people and innovation shaping tomorrow's hydrogen economy

    International Nuclear Information System (INIS)

    Therrien, R.

    2009-01-01

    'Full text': As Canada's largest university research-funding agency, the Natural Sciences and Engineering Research Council of Canada (NSERC) supports the training of some 26,500 university students and postdoctoral fellows, funds the research efforts of more than 11,800 university and college professors and stimulates academic-industry research and development (R and D) partnerships involving over 1,400 companies each year. In the hydrogen and fuel cell arena, NSERC has sponsored cutting edge research for over two decades. During that time, the level of activity has intensified significantly - from a mere handful of projects in the early 1980s and 1990s, to more than 150 grants and scholarships in 2008. Since 2002, NSERC's annual support has tripled from about $2.9 million to over $9 million. More than half of that investment is earmarked for university-industry projects involving over 40 fuel cell and hydrogen business interests. NSERC supports hydrogen advances through its Discovery Grants for basic research, Research Partnerships Programs' grants for research and knowledge transfer involving companies, and scholarships and fellowships for skills development. All of these initiatives provide advanced training for students at the post-graduate level, resulting in job-ready professionals who will help shape tomorrow's hydrogen economy. In 2007, NSERC doubled its funding for strategic research partnerships in the area of sustainable energy systems, including hydrogen-related R and D. These public-private partnerships permit companies to capitalize, at minimal cost, on university innovations and training. In addition to supporting project-specific partnerships, the new funds enabled the creation of several national networks that unite industrial and research interests engaged in fuel cell advancement on the one hand, and in hydrogen technologies on the other. The partnership opportunities that exist at NSERC will be briefly described and examples of successful

  5. International seminar on the safety research needs for Russian-designed reactors: material presented at the international seminar 1997

    International Nuclear Information System (INIS)

    1997-01-01

    This seminar on international, national and bilateral cooperation programmes on the safety research needs for Russian-designed reactors was held in Tokyo, Japan (1997) and hosted by the OECD Nuclear Energy Agency and the Science and Technology Agency (STA) of Japan. More than 70 participants attended the seminar. Represented were experts from OECD/NEA member countries and Russia, the International Atomic Energy Agency (IAEA), the ISTC, the INSC and the Russian INSC. Eighteen papers were presented in five sessions. The seminar was structured around four main areas of cooperation: cooperative programmes of the OECD/NEA, programmes of international organisations, bi-lateral programmes, and national programmes of OECD/NEA member countries having reactors of the VVER type. General conclusions, followed by specific technical conclusions are included

  6. Quantifying the variability of financial disclosure information reported by authors presenting research at multiple sports medicine conferences.

    Science.gov (United States)

    Jegede, Kolawole A; Ju, Brian; Miller, Christopher P; Whang, Peter; Grauer, Jonathan N

    2011-11-01

    In the study reported here, we compared self-reported industry relationships of authors who attended 3 major orthopedic sports medicine conferences during a single calendar year. Our goal was to calculate the variability between disclosure information over time. A significant percentage of authors who attended these meetings were inconsistent in submitting their disclosure information. In addition, most authors with irregularities had more than 1 discrepancy. We believe that the vast majority of the observed discrepancies did not result from intentional deception on the part of the authors but instead from ongoing confusion regarding which industry relationships should be acknowledged for particular meetings (some specialty societies require that all relationships be divulged, whereas others require only those affiliations directly applicable to research being presented). In the absence of a uniform disclosure policy that is widely adopted by many specialty societies, these findings suggest that the disclosure process will continue to be plagued by inconsistent reporting of financial conflicts of interest.

  7. Present status of research activities at the national institute for fusion science and its role in international collaboration

    International Nuclear Information System (INIS)

    Fujita, J.

    1997-01-01

    In the National Institute for Fusion Science (NIFS), Japan, a helical magnetic confinement system named Large Helical Device (LHD) is under construction with objective of comprehensive studies of high temperature plasmas in a helical system and investigation of a helical reactor as an alternative approach. Superconducting coils of l = 2, m = 10, major radius R = 3.9 m, produce a steady state helical magnetic field for confinement, together with poloidal coils on LHD. The magnetic field strength on the axis is 3.0 T in the phase I and 4.0 T in the phase II experiment. The plasma major radius in LHD is 3.75 m, and averaged plasma radius is 0.6 m. The plasma will be produced and heated with ECH, and further heated with NBI and ICRF. It is also planned to produced a steady state plasma in LHD. It is expected to have the first plasma in 1998. Small devices such as CHS and others are under operation in the NIFS for supporting the LHD project. The Data and Planning Center of NIFS is collecting, compiling and evaluating atomic and molecular data which are necessary for nuclear fusion research. The talk will include the present status of the construction of LHD, research activities on the development of heating and diagnostic devices for LHD, and experimental results obtained on CHS, JIPP T-IIU and other devices. The role of NIFS on promoting IAEA activities to bridge large scale institutions and small and medium scale laboratories for world-wide collaborations in the field of plasma physics and fusion research will also be introduced, together with an idea of organizing a regional center in Asia. (author)

  8. Subjectivities in Research in Science Education presented at the National Symposium of Physics Education of the last five years

    Directory of Open Access Journals (Sweden)

    Sérgio Choiti Yamazaki

    2015-12-01

    Full Text Available This paper presents the results of a survey conducted in a public university in the country, which aimed to identify the presence elements ordinarily related to subjective phenomena, in the works published in National Symposium of Physics Education, an event that provides meeting between teachers, researchers and students from around the country. The elements to which we have referred are found in contemporary didactic and pedagogical proposals, because it is identified that purely cognitive or even cultural rights are not sufficient to understand the phenomena that happen in the classroom, or more broadly, in education as a whole. The analysis contemplated the publications of the past 3 symposia, and the results infer a small increase of citations of these elements. However, this growth must be questioned because the quotes are made in isolation, not being taken to support the analysis of the authors. In addition, this research also shows that the presence of these elements is very small compared with the total number of papers published in the events.

  9. PREFACE: 14th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2011)

    Science.gov (United States)

    Teodorescu, Liliana; Britton, David; Glover, Nigel; Heinrich, Gudrun; Lauret, Jérôme; Naumann, Axel; Speer, Thomas; Teixeira-Dias, Pedro

    2012-06-01

    ACAT2011 This volume of Journal of Physics: Conference Series is dedicated to scientific contributions presented at the 14th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2011) which took place on 5-7 September 2011 at Brunel University, UK. The workshop series, which began in 1990 in Lyon, France, brings together computer science researchers and practitioners, and researchers from particle physics and related fields in order to explore and confront the boundaries of computing and of automatic data analysis and theoretical calculation techniques. It is a forum for the exchange of ideas among the fields, exploring and promoting cutting-edge computing, data analysis and theoretical calculation techniques in fundamental physics research. This year's edition of the workshop brought together over 100 participants from all over the world. 14 invited speakers presented key topics on computing ecosystems, cloud computing, multivariate data analysis, symbolic and automatic theoretical calculations as well as computing and data analysis challenges in astrophysics, bioinformatics and musicology. Over 80 other talks and posters presented state-of-the art developments in the areas of the workshop's three tracks: Computing Technologies, Data Analysis Algorithms and Tools, and Computational Techniques in Theoretical Physics. Panel and round table discussions on data management and multivariate data analysis uncovered new ideas and collaboration opportunities in the respective areas. This edition of ACAT was generously sponsored by the Science and Technology Facility Council (STFC), the Institute for Particle Physics Phenomenology (IPPP) at Durham University, Brookhaven National Laboratory in the USA and Dell. We would like to thank all the participants of the workshop for the high level of their scientific contributions and for the enthusiastic participation in all its activities which were, ultimately, the key factors in the

  10. The Impact of Natural Disasters on Youth: A Focus on Emerging Research beyond Internalizing Disorders.

    Science.gov (United States)

    Self-Brown, Shannon; Lai, Betty; Patterson, Alexandria; Glasheen, Theresa

    2017-08-01

    This paper reviews youth outcomes following exposure to natural disaster, with a focus on three relatively understudied outcomes: externalizing behavior problems, physical health, and posttraumatic growth. Recent, high-impact studies focusing on each outcome are summarized. Studies highlighted in this review utilize innovative and comprehensive approaches to improve our current understanding of youth broad-based physical and mental health outcomes beyond PTSD. The review concludes with recommendations to advance the field of youth disaster research by exploring how disasters may impact children across multiple domains, as well as using cutting edge ecobiological approaches and advanced modeling strategies to better understand how youth adjust and thrive following natural disaster.

  11. RADIATION CHEMISTRY 2010 GORDON RESEARCH CONFERENCE JULY 18-23

    Energy Technology Data Exchange (ETDEWEB)

    Thomas Orlando

    2010-07-23

    The 2010 Gordon Conference on Radiation Chemistry will present cutting edge research regarding the study of radiation-induced chemical transformations. Radiation Chemistry or 'high energy' chemistry is primarily initiated by ionizing radiation: i.e. photons or particles with energy sufficient to create conduction band electrons and 'holes', excitons, ionic and neutral free radicals, highly excited states, and solvated electrons. These transients often interact or 'react' to form products vastly different than those produced under thermal equilibrium conditions. The non-equilibrium, non-thermal conditions driving radiation chemistry exist in plasmas, star-forming regions, the outer solar system, nuclear reactors, nuclear waste repositories, radiation-based medical/clinical treatment centers and in radiation/materials processing facilities. The 2010 conference has a strong interdisciplinary flavor with focus areas spanning (1) the fundamental physics and chemistry involved in ultrafast (atto/femtosecond) energy deposition events, (2) radiation-induced processes in biology (particularly spatially resolved studies), (3) radiation-induced modification of materials at the nanoscale and cosmic ray/x-ray mediated processes in planetary science/astrochemistry. While the conference concentrates on fundamental science, topical applied areas covered will also include nuclear power, materials/polymer processing, and clinical/radiation treatment in medicine. The Conference will bring together investigators at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present work in poster format or as contributors to the Young Investigator session. The program and format provides excellent avenues to promote cross-disciplinary collaborations.

  12. The impact of office workspace on the satisfaction of employees and their overall health – research presentation

    Directory of Open Access Journals (Sweden)

    Andrej Baričič

    2014-04-01

    Full Text Available Background: The present article addresses the links between the real-estate factors of the workspace on employee satisfaction and their impact on the overall health of employees. The purpose of the research is to facilitate the improvement of employee health through the application of base parameters, and consequently, the changes of workspace and work processes. The research tests two hypotheses: real-estate factors have a significant impact on employee satisfaction with the workspace; and that satisfaction of employees with the workspace has a significant impact on the overall health of employees.Methodology: We carried out a quantitative research with a broad range of different questions, scales and differentials, whereby the majority of instruments was originally constructed with suitable measurement characteristics. Testing of the questionnaire with the method of internal consistency showed that the questionnaire demonstrates a high level of consistency. The entire questionnaire includes 163 variables divided into content sections: general questions, business building and workspace, workspace design, habits, conditions in the workspace, organisational culture, health care, physical health condition, mental health condition. In July and August 2010, the questionnaire was completed by 1,036 employees from entities in the service sector, i.e. the financial sector, health sector, civil service and others. All the respondents included in the research sample worked in offices. The questionnaire was anonymous in accordance with ethical standards. The results were statistically analysed with the application of factor analysis, which served as a basis for identifying the important factors, while we applied structural equation modelling for verifying the statistically significant mutual effects. Furthermore, we analysed the results and carried out statistical calculations to test the hypotheses.Results: The results show that real-estate factors of

  13. Conference presentation to publication: a retrospective study evaluating quality of abstracts and journal articles in medical education research

    Directory of Open Access Journals (Sweden)

    Christopher R. Stephenson

    2017-11-01

    Full Text Available Abstract Background There is little evidence regarding the comparative quality of abstracts and articles in medical education research. The Medical Education Research Study Quality Instrument (MERSQI, which was developed to evaluate the quality of reporting in medical education, has strong validity evidence for content, internal structure, and relationships to other variables. We used the MERSQI to compare the quality of reporting for conference abstracts, journal abstracts, and published articles. Methods This is a retrospective study of all 46 medical education research abstracts submitted to the Society of General Internal Medicine 2009 Annual Meeting that were subsequently published in a peer-reviewed journal. We compared MERSQI scores of the abstracts with scores for their corresponding published journal abstracts and articles. Comparisons were performed using the signed rank test. Results Overall MERSQI scores increased significantly for published articles compared with conference abstracts (11.33 vs 9.67; P < .001 and journal abstracts (11.33 vs 9.96; P < .001. Regarding MERSQI subscales, published articles had higher MERSQI scores than conference abstracts in the domains of sampling (1.59 vs 1.34; P = .006, data analysis (3.00 vs 2.43; P < .001, and validity of evaluation instrument (1.04 vs 0.28; P < .001. Published articles also had higher MERSQI scores than journal abstracts in the domains of data analysis (3.00 vs 2.70; P = .004 and validity of evaluation instrument (1.04 vs 0.26; P < .001. Conclusions To our knowledge, this is the first study to compare the quality of medical education abstracts and journal articles using the MERSQI. Overall, the quality of articles was greater than that of abstracts. However, there were no significant differences between abstracts and articles for the domains of study design and outcomes, which indicates that these MERSQI elements may be applicable to abstracts. Findings

  14. Presentation for the first research co-ordination meeting on development of kits for radioimmunometric assays for tumour markers

    International Nuclear Information System (INIS)

    Gavilondo, J.

    1997-01-01

    Regarding to PSA CIGB- IAEA project the center will be generating a panel of monoclonal antibodies against prostatic specific antigen (PSA) free and complexed to α1 antichymotrysin, and tissue polypeptide specific (TPS) antigen as potentially useful markers for the diagnosis of prostate and breast cancer using IRMA or RIA. The panel of monoclonal antibodies would be distributed in Cuba and another countries for the development of diagnostic Kits. The detailed objectives of the contract are: 1. To obtain a panel of monoclonal antibodies against prostatic specific antigen (PSA) complexed antichymotrysin. 2. To obtain a panel of monoclonal antibodies against free PSA. 3. To study the potential use for detect free or complexed PSA in the serum of patients with benign prostatic hypertrophy or prostatic neoplasia. 4. To obtain a panel of monoclonal antibodies against TPS. 5. To develop and validate IRMA or RIA assays using the panel of monoclonal antibodies. The objectives are designed according to the present knowledge on the field of monoclonal antibodies and diagnostic kits. Basic techniques for developing monoclonal antibodies (Mabs) have been used in our division for more than 10 years. The possibility to acquire commercial PSA antigen could reduced the overall time to obtain the Mabs, according with our experience. All these aspects support the idea that the proposing Cuban institutes are able to develop this research project and that its benefits will be applicable in the country and in the region

  15. Report to the Congress: liquid metal fast breeder reactor program--past, present, and future, Energy Research and Development Administration

    International Nuclear Information System (INIS)

    1975-01-01

    The past, present, and future of the liquid metal fast breeder reactor (LMFBR) program, the Nation's highest priority energy program, are studied. ERDA anticipates that the operation of the first large commercial breeder will start in 1987, and that 186 commercial-size breeders will be in operation by the year 2000. The breeder program is made up of six major areas, each dealing with an important element of technology: reactor physics; fuels and materials; fuel recycle; safety; component development; plant experience; and facilities used in the LMFBR program. ERDA is implementing a new system for administering, managing, and controlling the breeder program that will provide increased program visibility and control. Federal funding for breeder development was $168 million in FY 1971, accounting for 40% of the total Federal R and D energy budget; in FY 1976 Federal funding for this program will be $474 million, only 26% of total Federal funding for energy research. Besides Federal funds, over half a billion dollars have been or will be invested by industry over the next 5 to 10 years to develop the breeder and to build a demonstration plant. Five other nations--the United Kingdom, France, Japan, West Germany, and the Soviet Union--have a high priority national energy program for developing the LMFBR. These foreign breeder programs could contribute important data and information to the U.S. program

  16. Oman Vision 2050 for Health Research: A Strategic Plan for the Future Based on the Past and Present Experience

    Directory of Open Access Journals (Sweden)

    Adhra Hilal Nasser Al Mawali

    2017-03-01

    Full Text Available Health care delivery in Oman has attained great heights since the modern renaissance in 1970. Although the health service had the main impetus all these years, the importance of health research began to take place by mid 1990’s and is now gaining momentum as an important responsibility and activity of the Ministry of Health (MoH. Although there has been progressively increasing investment and commitment to research activities in the recent Five Year Plan for Health Development, it still lags behind in the quality and quantity of research output. Lack of factors like adequate infrastructure, dedicated human resources, empowerment of existing systems, and societal support for research have adversely affected research output. Centre of Studies and Research in MoH has proposed a strategic plan, the ‘Health Vision 2050 for Health Research’ with aim of making Oman the regional leader and a research hub of world standards in health research. The mission is to promote, facilitate, and conduct high quality health research addressing national health priorities to improve health care services and enhance the efficiency and effectiveness of the health system, reduce health inequity, and contribute to socioeconomic development. The strategy includes setting health research priorities, strengthening the health research capacity, defining and implementing norms and standards, developing health research (quality and quantity, translating evidence into policy, strategy and practice, monitoring and coordinating research, financing health research, and evaluating the effectiveness of the health research system. It should generate a multifold increase in the quality and quantity of health research in Oman, positively impacting the health system and health care service.

  17. In Indigenous Words: Exploring Vignettes as a Narrative Strategy for Presenting the Research Voices of Aboriginal Community Members

    Science.gov (United States)

    Blodgett, Amy T.; Schinke, Robert J.; Smith, Brett; Peltier, Duke; Pheasant, Chris

    2011-01-01

    Recently, awareness within academia has grown regarding the incompatibilities of mainstream research with indigenous cultures as well as the historical injustices that have accrued through colonizing practices. Accordingly, support for alternative (non-Westernized) research approaches has been increasing. Participatory action research (PAR) and…

  18. Review of 130 years of research on cyanobacteria in aquatic ecosystems in Serbia presented in a Serbian Cyanobacterial Database

    Directory of Open Access Journals (Sweden)

    Zorica Svirčev

    2017-05-01

    Full Text Available The presence of toxic cyanobacteria in aquatic ecosystems in the territory of the Republic of Serbia was surveyed over a period of several decades. Increasing attention is being paid to some negative consequences that may be caused by these microorganisms. Information from available literary sources regarding the distribution and frequency of cyanobacteria and their toxins over a period of 130 years, together with the effects on humans and wildlife in aquatic ecosystems, were gathered and incorporated into a Serbian Cyanobacterial Database created for the CYANOCOST Action. This database encompasses information on 65 aquatic ecosystems, including rivers, lakes, ponds, canals, irrigation reservoirs, reservoirs used for drinking water supply and reservoirs used for other purposes. Cyanobacterial blooms were found in almost 80% of the investigated aquatic ecosystems. The analysis of the research showed the presence of more than 70 species, including blooms of 24 species from 13 genera. Five species of cyanobacteria: Microcystis aeruginosa, Aphanizomenon flos-aquae, Planktothrix agardhii, Microcystis flos-aquae and Planktothrix rubescens frequently formed blooms in the investigated waterbodies and cyanotoxins were also detected in some of them, which had certain negative effects. Here, we present an overview of data contained in the Serbian Cyanobacterial Database, concerning cyanobacterial distribution, cyanotoxin production and associated biological effects in different types of water bodies from the Republic of Serbia. Also, recent important and major cases of cyanobacterial blooming in reservoirs used for drinking water supply: at Vrutci and Ćelije, the Aleksandrovac irrigation reservoir, the Ponjavica River and Lake Palić, including systematic research on the Lake Ludoš and few fishponds are further described. It can be concluded that cyanobacteria and cyanotoxins are omnipresent in different water bodies throughout the Republic of Serbia

  19. 5th International Conference on Research into Design

    CERN Document Server

    2015-01-01

    This book showcases cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.

  20. Present status of research on radiation utilization in 1994 at JAERI. Utilization of irradiation and RI production and utilization

    International Nuclear Information System (INIS)

    1994-10-01

    In Japan Atomic Energy Research Institute, Takasaki Radiation Chemistry Research Establishment is in charge of the utilization of irradiation, and Tokai Research Establishment is in charge of the production and utilization of radioisotopes. As for the utilization of irradiation the development of new polymers, the development of environment preservation technology such as flue gas treatment, and by using various ion beams from four accelerators, the development of the materials used for space environment, nuclear fusion and new functional materials, the research on the radiation application to biotechnology, the development of the production and utilization of new radioisotopes have been carried out. As for the production and utilization of radioisotopes, the development of new products and new utilization techniques, the technology of producing and using a large amount of tritium, and the research on the chemical behavior of tritium have been carried out. The international cooperations have been promoted positively. In this report, the research activities in 1994 are described. (K.I.)