WorldWideScience

Sample records for preparasi dc dan

  1. PREPARASI DAN KARAKTERISASI ZEOLIT DARI ABU LAYANG BATUBARA SECARA ALKALI HIDROTERMAL

    Directory of Open Access Journals (Sweden)

    Jumaeri Jumaeri

    2012-01-01

    Full Text Available Preparasi zeolit dari abu layang batubara PLTU Suralaya secara alkali hidrotermal telah dilakukan. Preparasi dilakukan terhadap abu layang yang telah direfluks dengan HCl 1M dan tanpa refluks. Larutan NaOH dengan konsentrasi tertentu ( 1 ; 2 dan 3 M dicampur dengan abu layang batu bara dengan rasio 10 ml larutan tiap 1 gram abu layang, ke dalam tabung Teflon 100 ml dalam suatu autoclave stainless-steel. Autoclave kemudian dipanaskan pada temperature 80-16 oC selama tiga hari. Zeolit sintesis yang dihasilkan selanjutnya diuji secara kualitatif dengan menggunakan Spektroskopi Inframerah, dan Difraksi Sinar-X. Hasil penelitian menunjukkan bahwa aktivasi abu layang dengan proses alkali hidrotermal dapat menghasilkan material yang mempunyai struktur mirip zeolit (zeolit-like. Produk hidrotermal terdiri dari campuran zeolit (Zeolit P, Zeolit Y serta kristal sodalit dan mullit. Pada temperatur 160 oC, diperoleh zeolit dengan kristalinitas lebih tinggi dari pada 100 oC, baik melalui refluks atau tanpa refluks. Karakteristik zeolit yang terbentuk sangat ditentukan oleh kondisi proses, yang meliputi konsentrasi NaOH, waktu, dan temperatur.

  2. Pengaruh Preparasi Pasta dan Temperatur Annealing pada Dye-Sensitized Solar Cells (DSSC Berbasis Nanopartikel ZnO

    Directory of Open Access Journals (Sweden)

    Ahmad Syukron

    2013-09-01

    Full Text Available Telah difabrikan Dye-sensitized Solar Cell (DSSC berbasis nanopartikel ZnO dengan variasi metode preparasi pasta sesuai dengan Yonekawa dan Gratzel dan temperatur fabrikasi. Nanopartikel ZnO dibuat dengan metode kopresipitasi yaitu dengan mereaksikan prekursor Zinc Asetat dengan DEG (diethylene glycol. Prepararasi fotoelektroda ZnO dilakukan dengan memvariasikan komposisi pasta berdasarkan metode yang dilakukan oleh Gratzel dan Yonekawa untuk mendapatkan efisiensi yang besar. Selain itu, dilakukan variasi temperatur pada proses anil fotoelektroda. Fabrikasi DSSC menggunakan pewarna manggis sebagai pewarna alami. DSSC difabrikasi dalam bentuk struktur sandwich dengan menggunakan pasangan redoks I3-/I- dan elektroda pembanding platina/karbon. Hasil karakterisasi ZnO menunjukkan ZnO berdispersi tunggal dengan ukuran agregat dan partikel sebesar ~300nm dan 13,93 nm. Energi band gap yang dihasilkan dari nanopartikel ZnO adalah 3,29 eV. Berdasarkan karakteristik kurva I-V dan IPCE, diperoleh bahwa efisiensi terbaik berada pada suhu 200°C dengan menggunakan metode Yonekawa sebesar 0,11% dengan IPCE 0,0005%, FF 61,41%, Isc 2,79µA, Voc 232,4 mV.

  3. UNJUK KERJA PENGUBAH TEGANGAN DC-DC TOPOLOGI BOOST DENGAN NILAI INDUKTANSI DAN KAPASITANSI YANG DIOPTIMASI PADA KEADAAN TRANSIEN

    Directory of Open Access Journals (Sweden)

    I Wayan Arta Wijaya

    2009-05-01

    Full Text Available Pengubah daya DC-DC topologi boost dapat menghasilkan tegangan yang lebih tinggi dari tegangan input dengan riak (ripple yang kecil dan efisiensi yang cukup tinggi. Nilai dari sebuah induktansi dan kapasitansi dari pengubah daya DC-DC dengan menggunakan topologi boost dioptimalkan menggunakan analisa transien. Fungsi ini diatur berdasarkan pada analisa dari pengubah daya selama kondisi transien. Nilai induktansi dan kapasitansi yang telah dioptimalkan dengan perhitungan dibandingkan dalam simulasi pada pengubah daya DC-DC dan hasilnya akan dibuktikan dengan menggunakan hasil percobaan. Nilai optimal untuk kapasitor dan induktor pada frekuensi 666,7 Hz, siklus kerja (duty cycle 66,7 %, resistansi output 36 Ώ dan tegangan input 12 volt adalah 1038 μF dan 11,9 mH

  4. ANALISIS SISTEM KONTROL MOTOR DC SEBAGAI FUNGSI DAYA DAN TEGANGAN TERHADAP KALOR

    OpenAIRE

    Dzakwan, Akhmad

    2008-01-01

    Telah dilakukan penelitian daya dan sistem kontrol tegangan rangkaian peningkatan suhu motor DC. Banyak energi listrik yang diubah menjadi panas sehingga dapat menyebabkan peningkatan suhu motor DC pada stator dan rotor. Dalam penelitian ini, daya dan sistem kontrol tegangan rangkaian mendeteksi peningkatan suhu motor DC dan juga sebagai umpan balik variabel. Kontrol sistem pasokan tenaga listrik berdasarkan perubahan tersebut. Dalam penelitian ini kami memperoleh tenaga maksimum dan tegangan...

  5. Desain dan Implementasi Konverter DC-DC Rasio Tinggi Berbasis Pensaklaran Kapasitor dan Induktor Terkopel untuk Aplikasi pada Photovoltaic

    Directory of Open Access Journals (Sweden)

    Gusti Rinaldi Zulkarnain

    2017-01-01

    Full Text Available Seiring dengan berkembangnya pembangkit listrik yang menggunakan photovoltaic sebagai salah satu energi terbarukan, maka berdampak kepada perkembangan teknologi konverter. Tegangan output dari photovoltaic masih perlu ditingkatkan agar mampu dihubungkan pada sistem grid. Salah satu pengembangan topologi konverter boost untuk aplikasi keluaran photovoltaic yaitu konverter DC-DC rasio tinggi berbasis pensaklaran kapasitor dan induktor terkopel. Konverter ini merupakan pengembangan dari konverter gabungan boost-flyback yang ditambahkan rangkaian pensaklaran kapasitor. Kelebihan dari konverter ini adalah memiliki rasio konversi dan efisiensi yang tinggi. Konverter ini mampu menjaga tegangan output konstan ketika tegangan inputnya berubah-ubah. Konverter ini sangan cocok diaplikasikan pada sumber energi alternatif yang menghasilkan tegangan DC rendah seperti photovoltaic.

  6. PREPARASI DAN KARAKTERISASI KITIN DARI KULIT UDANG PUTIH (Litophenaeus vannamei

    Directory of Open Access Journals (Sweden)

    Mardiyah Kurniasih

    2007-11-01

    Full Text Available Chitin is one of the most abundant natural polysaccharides produced by many living organisms; it is usually found as a component of crustacean shells. In this paper, Chitin have been isolated from white shrimp (Litophenaeus vannamei. The preparation of chitin using chemical products to deproteinize and demineralize the source material. Characterization included determination of water, ash, fat and protein degree; moreover chitin powder characterize with FTIR and XRD spectroscopy. The result showed that process efficiency of chitin from white shrimp (Litophenaeus vannamei was 20.95%, with degree of water, ash, fat and protein were 5.39, 2.66, 1.54 and 36.16%, respectively.

  7. Pengujian dan Simulasi Karakteristik Motor DC pada Industri dengan Metode Algoritma Genetik

    OpenAIRE

    Syam, Rafiuddin

    2009-01-01

    Penelitian ini menjelaskan tentang pengujian karakteristik motor DC dengan eksperimental dan simulasi. Pada banyak sistem motor DC penguat terpisah yang digunakan dalam dunia industri, namun demikian selalu menjadi masalah adalah sejauh mana pengaruh arus jangkar terhadap putaran. Sehingga penelitian ini bertujuan untuk mengungkap pengaruharus jangkar terhadap putaran. Metode yang digunakan dalam uji simulasi adalah menggunakan metode algoritma genetik dengan program simulink Matlab V.7. Sela...

  8. Isolasi dan Karakterisasi Parsial Kolagen dari Teripang Gamma (Stichopus variegatus

    Directory of Open Access Journals (Sweden)

    Yusro Nuri Fawzya

    2016-06-01

    Full Text Available Isolasi dan karakterisasi parsial kolagen dari teripang gamma (Stichopus variegatus telah dilakukan. Isolasi dilakukan melalui tiga tahap yaitu preparasi, ekstraksi dan isolasi. Tahap preparasi meliputi tahapan penyiangan, pencucian dan perendaman dalam akuades, dalam alkohol, dalam larutan Tris-HCl dan etilenadiaminatetraasetat  (EDTA dan perendaman dalam larutan natrium hidroksida (NaOH. Ekstraksi dilakukan dengan perendaman asam asetat 0,5M. Isolasi dilakukan dengan cara pengendapan menggunakan NaCl dilanjutkan proses dialisis. Isolat kolagen teripang gamma yang diperoleh memiliki rendemen sebesar 16,40% (bobot kering, nilai pH 6,08 dan derajat putih 77,02%. Gugus fungsi kolagen terdiri dari amida A (3412 cm-1, B (2929 cm-1, I (1654 cm-1, II (1554 cm-1, dan III (1239 cm-1. Asam amino utama penyusun kolagen yaitu glisin, prolin, dan alanin, masing-masing sebesar 16,88%; 6,71%; dan 6,42%. Kolagen yang dihasilkan merupakan kolagen tipe I, diduga terdiri dari 3 rantai a1 yang homolog dengan berat molekul 130,33 kDa.

  9. Perancangan dan Implementasi Pengaturan Kecepatan Motor Brushless DC Menggunakan Metode Model Predictive Control (MPC

    Directory of Open Access Journals (Sweden)

    Fachrul Arifin

    2015-12-01

    Full Text Available Saat ini, penelitian dan pengembangan mobil listrik (electric vehicle sudah menjadi pusat perhatian bagi kalangan industri dan civitas academica. Sudah banyak kendaraan listrik yang sudah diproduksi secara massal di seluruh dunia. Beberapa dari kendaraan listrik tersebut menggunakan motor BLDC sebagai penggerak utamanya. Pada Tugas Akhir kali ini, salah satu kemampuan yang akan diteliti dan dianalisa adalah respon kecepatan motor BLDC pada mobil listrik saat mobil diberi suatu beban. Ketika mendapat pembebanan, respon kecepatan dari motor BLDC akan turun sehingga performa dari motor BLDC tidak sesuai dengan setpoint yang diharapkan. Oleh karena itu, dibutuhkan suatu kontroler yang dapat mengatasi permasalahan diatas dan melakukan pengaturan kerja pada motor BLDC agar bekerja sesuai dengan kebutuhan. Kontroler ini diharapkan mampu untuk mengembalikan respon kecepatan pada motor BLDC kembali kepada setpoint ketika motor BLDC diberi pembebanan. Penulis menggunakan metode kontroler Model Predictive Control (MPC yang dapat memprediksi perilaku sistem pada masa depan yang bergantung pada informasi sistem saat ini dan model state-space dari sistem. Berdasarkan hasil implementasi, kontroler MPC dapat memberikan respon yang sesuai dengan tracking setpoint yang diberikan dengan rata-rata nilai steady-state error sebesar 9,8% untuk semua parameter pembebanan.

  10. Preparasi Minimal pada Pembuatan Gigi Tiruan Cekat dengan Fiber Reinforced Composite (FRC

    Directory of Open Access Journals (Sweden)

    Aditya Ayat Santiko

    2016-11-01

    Full Text Available Dalam praktek sering kali dokter gigi dihadapkan pada pasien yang kehilangan gigi anterior dan ingin segera dibuatkan gigi tiruan karena alasan estetik. Gigi tiruan yang dibuat bisa berupa gigi tiruan sebagian lepasan (GTSL atau gigi tiruan cekat (GTC. Pada GTSL, adanya plat pada palatum menyebabkan rasa tidak nyaman, selain itu pasien setiap kali harus buka pasang gigi tiruan kembali sehingga cukup merepotkan. Oleh karena itu pada umumnya pasien ingin dibuatkan GTC dan hal ini memang sesuai dengan indikasi GTC. Hal yang menjadi pertimbangan pada pembuatan GTC adalah pengasahan permukaan gigi secara keseluruhan bila akan dibuat desain full crown. Pada perkembangan desain GTC ada desain yang disebut resin bonded bridge atau adhesive bridge yaitu GTC yang dibuat pada gigi abutment yang dipreparasi minimal pada bagian palatal saja dan dilekatkan secara mikromekanikal antara retainer sayap logam dan gigi yang telah dipreparasi. Pasien wan ita usia 22 tahun datang ke klinik Prostodonsia RSGM Prof Soedomo UGM karena kehilangan gigi insisif sentral kiri atas. Pada kasus ini dilakukan pembuatan GTC dengan bahan fiber reinforced composite (FRC. Pembuatan bridge dengan bahan FRC dapat dilakukan secara langsung dan tidak langsung. Pada makalah ini akan dibahas pembuatan bridge FRC secara tidak langsung yaitu dengan menggunakan gigi artlfisial komposit. Hasil menunjukkan estetis yang baik, kontrol setelah 2 bulan tidak ada perubahan warna dan pasien merasa puas dengan penampilannya, jaringan gingiva di sekitarnya normal.

  11. Analisis Perhitungan Panas Motor DC SHUNT Pada Saat Start Dan Pengereman ( Aplikasi pada Laboratorium Konversi Energi Listrik FT-USU ).

    OpenAIRE

    Ginting, Eka Dian Arjuna

    2011-01-01

    Motor adalah mesin yang mengubah energi listrik menjadi energi mekanis. Pada motor arus searah energi listrik arus searah diubah menjadi energi mekanis. Dalam dunia industri, motor arus searah banyak digunakan sebagai penggerak pompa air, blower, hoist pada crane. Dalam operasi suatu motor DC maka akan timbul rugi – rugi panas sehingga terjadi kenaikan suhu yang menyebabkan kerusakan isolasi pada motor DC tersebut. Pada motor DC rugi – rugi panas lebih besar terjadi pada kea...

  12. Adsorpsi Pb2+ dan Zn2+ pada Biomassa Imperata cylindrica

    Directory of Open Access Journals (Sweden)

    Noer Komari

    2017-03-01

    Full Text Available Metode alternatif untuk mengatasi pencemaran logam berat adalah biosorpsi menggunakan biomassa sebagai adsorben. Telah dilakukan penelitian kajian adsorpsi campuran Pb2+ dan Zn2+ pada biomassa Imperata cylindrica sebagai adsorben. Tujuan penelitian adalah mengetahui kemampuan biomassa mengadsorpsi Pb2+ dan Zn2+. Preparasi biomassa dilakukan dengan aktivasi menggunakan asam nitrat dan amonium hidroksida. Adsorpsi dilakukan dengan sistem batch. Parameter yang diukur adalah pH optimum, waktu kontak optimum, kapasitas adsorpsi dan recovery ion logam. Analisis kadar logam dilakukan dengan menggunakan Spektrofotometer Serapan Atom (AAS. Hasil penelitian menunjukkan pH optimum adsorpsi Pb2+ dan Zn2+ masing-masing pada pH 5 dan pH 6. Waktu kontak optimum adsorpsi Pb2+ dan Zn2+ masing masing pada 40 menit dan 30 pertama. Kapasitas adsorpsi Pb2+ dan Zn2+ pada konsentrasi awal 10 ppm masing-masing adalah 90,95% dan 43,60%. Recovery Pb2+ dan Zn2+ masing-masing 84,45% dan 57,13%.

  13. Isolasi Minyak Atsiri dari Sereh Merah (Andropogon citratus DC.) Segar dan Kering Serta Analisis Komponen Secara GC-MS

    OpenAIRE

    Situmorang, Betty Meilya

    2013-01-01

    Essential oil is a term used for volatile oil and obtained from part of plant such as leaves, flowers, fruit, bark and roots. Lemongrass oil is a major export commodities among the various types of essential oil. The main content of lemongrass oil are sitronellal and geraniol, and content oil of lemongrass is 0.5 to 1.2%. Andropogon citratus DC. of the family Poaceae is one of plant that contains essential oil and is widely used as a liniment. The objective of this research is to determine th...

  14. Analisis Pengaruh Beban Terhadap Karakteristik dan Efisiensi Generator Arus Searah Penguatan Kompon Kumulatif dan Kompon Diferensial (Aplikasi pada Laboratorium Konversi Energi Listrik FT-USU)

    OpenAIRE

    Lubis, Syahrizal

    2015-01-01

    Salah satu jenis generator DC yang cukup banyak digunakan adalah generator DC kompon panjang dan generator DC kompon pendek. Berdasarkan sifat penguatnya terhadap jangkar generator kompon dibagi menjadi dua yaitu generator DC kompon diferensial dan generator DC kompon kumulatif. Pada karakteristik berbeban sebuah generator DC menunjukkan bagaimana hubungan antara tegangan terminal Vt dan arus medan If ketika generator dibebani. Pada generator DC penguatan kompon, peningkatan...

  15. Preparasi Katalis Cu/Silika Gel dari Kristobalit Alam Sabang serta Uji Aktivitasnya pada Reaksi Dehidrogenasi Etanol

    Directory of Open Access Journals (Sweden)

    Surya Lubis

    2009-06-01

    Full Text Available Cu/Silica gel catalyst preparation by using silica content which is obtained from Sabang natural crystobalit has been done. Isolated silica from crystobalit is reacted with natrium hidroxide to produce silicate natrium that reacted further with sulphate acid to produce silica gel. Silica gel is characterized by infra red spektroscopy dan BET test. BET test result showed that silica gel obtained has specific surface area 260,04 m2/gram and ion Cu  impregnation into silica gel pores produce Cu/silica gel catalyst with spesific surace area 158,53 m/gram ith Cu2+ metal content = 193 ppm. Catalyst activation test Cu/silica gel at dehidrogenation reaction of etanol to produce asetaldehide was done at temperature 100oC – 300oC. Reseach showed that the highest asetaldehide consentration (20,24% is obtained at temperature 300oC.   Keywords: asetaldehide, crystobalit, Cu/silica gel, dehidrogenation, ethanol

  16. Advanced DC/DC converters

    CERN Document Server

    Luo, Fang Lin

    2003-01-01

    DC/DC conversion techniques have undergone rapid development in recent decades. With the pioneering work of these authors, DC/DC converters have now moved into their sixth generation. This book offers a concise, practical presentation of DC/DC converters, summarizing the spectrum of conversion tecnologies and presentingmany new ideas and more than 100 new topologies. Nowhere else in the literature are DC/DC converters so logically sorted and systematically introduced, and nowhere else can readers find detailed information on prototype topologies that represent a major contribution to modern power engineering. More than 320 figures, 60 tables, and 500 formulae facilitate understand and provide precise data.

  17. Pengaruh Diameter Partikel Terhadap Konsentrasi L-Dopa, Kc Dan De Pada Ekstraksi L-Dopa Dari Biji Kara Benguk (Mucuna Pruriens Dc.

    Directory of Open Access Journals (Sweden)

    Eni Budiyati

    2013-10-01

    Full Text Available Mucuna pruriens (biji kara benguk merupakan tanaman penghasil bahan obat-obatan karena mengandung senyawa L-Dopa. Senyawa tersebut dapat digunakan untuk pengobatan penyakit gangguan syaraf, anti bisa ular, meningkatkan bobot dan kekuatan otot, vitalitas seksual pria, zat anti-aging dan obat cacing pada manusia. Penelitian ini bertujuan untuk mengekstraksi L- Dopa dari biji kara benguk dengan menggunakan pelarut air. Di samping itu, penelitian ini juga mengevaluasi pengaruh dari diameter partikel terhadap konsentrasi L- dopa hasil ekstraksi, koefisien transfer massa (kC, dan difusivitas efektif (De. Tahapan yang digunakan pada penelitian ini adalah, persiapan bahan baku, proses ekstraksi, dan analisis L-Dopa. Proses ekstraksi dilakukan dalam tangki yang dilengkapi dengan thermometer. Analisis L-Dopa dilakukan dengan dengan High Performance Liquid Chromatography (HPLC. Hasil penelitian menunjukkan bahwa semakin kecil diameter partikel maka konsentrasi L-Dopa terekstrak semakin besar. Konsentrasi tertinggi diperoleh pada diameter partikel 0,5 mm yaitu 1739,56 ppm. Nilai difusivitas efektif (De untuk variabel diameter partikel (0,5; 0,675; 2,18; dan 2,5 mm hampir sama yaitu 2,99.10–5 sampai 3,07.10–5 cm2/menit. Sedangkan nilai koefisien transfer massa (kC berbanding terbalik dengan diameter partikel. Nilai kC berkisar antara 2,83.10-2 sampai 3,98.10-2 g/cm2.menit. 

  18. Desain Kontrol Multi – Input DC–DC Converter Sistem Hibrid Turbin Angin dan Sel Surya Menggunakan Kontrol Fuzzy Logic untuk Tegangan Rendah

    Directory of Open Access Journals (Sweden)

    Feby Agung Pamuji

    2015-09-01

    Full Text Available this paper describes a hybrid system that consist of Wind Turbines and Photovoltaic to supply electricity continuously for load. Output of Wind Turbines and Photovoltaic is controlled in order to generate maximum power. Multiple-input dc-dc converters is used to control power flow in order to have MPP (Maximum Power Point. Converter control using Fuzzy logic controller to control the output in order to be obtained MPP (Maximum Power Point from Wind Turbines and Photovoltaic, so the efficiency of wind turbines and photovoltaic can be improved.

  19. SINTESIS MEMBRAN NATA ALOE VERA-ETILENDIAMIN DAN KARAKTERISASINYA

    Directory of Open Access Journals (Sweden)

    EB Susatyo

    2014-06-01

    Full Text Available Serat yang terkandung di dalam nata Aloe vera adalah selulosa sehingga dapat digunakan dalam sintesis membran. Telah dilakukan penelitian tentang sintesis membran nata Aloe vera-etilendiamin (nata-en menggunakan sistem vakum cair. Proses preparasi membran berlangsung melalui tiga tahap, yaitu preparasi nata Aloe vera, aktivasi menggunakan asam sulfat, dan modifikasi dengan menggunakan etilendiamin. Tujuan penelitian adalah untuk mempelajari teknik dalam sintesis membran nata-en kemudian melakukan karakterisasi untuk mengetahui karakter strukturnya. Hasil penelitian menunjukkan perilaku yang berbeda dalam hal sifat mekanik dan strukturnya. Membran nata murni memiliki sifat mekanik yang kuat, nata teraktivasi cenderung rapuh, sedangkan nata-en bersifat liat. Spektra infra merah dari ketiga tipe membran (nata murni, nata teraktivasi, dan nata-en secara umum tidak mengalami perubahan yang signifikan, hanya terjadi pergeseran panjang gelombang dari masing-masing membran. Berdasarkan spektra infra merah dapat diketahui bahwa masing-masing membran mempunyai gugus hidroksil, tetapi serapannya semakin melebar untuk setiap membran. Gugus alkil dan karboksil juga masih tampak, namun pada membran nata teraktivasi serapannya berkurang, sedangkan pada membran nata-en muncul puncak baru yang menunjukkan adanya gugus amin. Hal ini membuktikan bahwa telah terjadi ikatan antara nata dengan etilendiamin. Fibers contained in nata Aloe vera is cellulose that can be used in the synthesis of membrane. The research has done on the synthesis of nata Aloe vera-ethylenediamine (nata-en membrane by using liquid vacuum system. Membrane preparation process consisted of three stages, they are nata Aloe vera preparation, activation using sulfuric acid, and membrane modification by using ethylenediamine. The purpose of research is to study the technique of nata-en membrane synthesis then to perform the characterization to determine the character of their structure.The results

  20. Penetapan Kandungan Fenolat Total Dan Uji Aktivitas Antioksidan Menggunakan Radikal Dpph Fraksi Etil Asetat Sari Buah Apel Beludru (Diospyros Blancoi a. Dc.)

    OpenAIRE

    Rahmawan, Johannes Baptista Yunio; Dwiatmaka, Yohanes

    2013-01-01

    Antioxidant plays a role in inhibiting oxidation by binding to free radicals. As a result, the cell damage that leads to degenerative diseases can be inhibited. This research was conducted to determine the antioxidant activity and total phenolic content of ethyl acetate fraction of velvet aple (Diospyros blancoi A.DC.) juice. Previously known that other plants from genus Diospyros contain phenolic compounds such as quercetin. Antioxidant activity test performed qualitatively and quantitativel...

  1. PENETAPAN KANDUNGAN FENOLAT TOTAL DAN UJI AKTIVITAS ANTIOKSIDAN MENGGUNAKAN RADIKAL DPPH FRAKSI ETIL ASETAT SARI BUAH APEL BELUDRU (Diospyros blancoi A. DC.)

    OpenAIRE

    Johannes Baptista Yunio Rahmawan; Yohanes Dwiatmaka

    2016-01-01

    Abstract: Antioxidant plays a role in inhibiting oxidation by binding to free radicals. As a result, the cell damage that leads to degenerative diseases can be inhibited. This research was conducted to determine the antioxidant activity and total phenolic content of ethyl acetate fraction of velvet aple (Diospyros blancoi A.DC.) juice. Previously known that other plants from genus Diospyros contain phenolic compounds such as quercetin. Antioxidant activity test performed qualitatively and qua...

  2. PENETAPAN KANDUNGAN FENOLAT TOTAL DAN UJI AKTIVITAS ANTIOKSIDAN MENGGUNAKAN RADIKAL DPPH FRAKSI ETIL ASETAT SARI BUAH APEL BELUDRU (Diospyros blancoi A. DC.

    Directory of Open Access Journals (Sweden)

    Johannes Baptista Yunio Rahmawan

    2016-04-01

    Full Text Available Abstract: Antioxidant plays a role in inhibiting oxidation by binding to free radicals. As a result, the cell damage that leads to degenerative diseases can be inhibited. This research was conducted to determine the antioxidant activity and total phenolic content of ethyl acetate fraction of velvet aple (Diospyros blancoi A.DC. juice. Previously known that other plants from genus Diospyros contain phenolic compounds such as quercetin. Antioxidant activity test performed qualitatively and quantitatively using radical of 1,1-diphenyl-2 pikrilhidrazil (DPPH and expressed as the value Inhibition Concentration 50 (IC50. Determination of total phenolic using Folin-Ciocalteu method expressed as equivalent mass of gallic acid. Phenolic compounds will be oxidized by the Folin-Ciocalteu under alkaline conditions, forming a blue solution. The results showed that the ethyl acetate fraction of velvet apple juice has very strong antioxidant activity with IC50 of (30.0 ± 0.09 mg / mL. Total phenolic content of (393.5 ± 0.35 mg gallic acid equivalents per gram of ethyl acetate fraction. Keywords: antioxidant, velvet apple (Diospyros blancoi A. DC, ethyl acetate fraction, DPPH, total phenolic content.

  3. Milliwatt dc/dc Inverter

    Science.gov (United States)

    Mclyman, C. W.

    1983-01-01

    Compact dc/dc inverter uses single integrated-circuit package containing six inverter gates that generate and amplify 100-kHz square-wave switching signal. Square-wave switching inverts 10-volt local power to isolated voltage at another desired level. Relatively high operating frequency reduces size of filter capacitors required, resulting in small package unit.

  4. A Unidirectional DC-DC Autotransformer for DC Grid Application

    Directory of Open Access Journals (Sweden)

    Meng Zhou

    2018-03-01

    Full Text Available Conventional unidirectional DC-DC converters for DC grid application employ DC-AC-DC two-stage conversion technology and suffer from high converter cost and power loss. To solve these issues, a unidirectional step-up DC-DC autotransformer (UUDAT and a unidirectional step-down DC-DC autotransformer (DUDAT are studied. The UUDAT and DUDAT are composed of a series connection of diode bridges and voltage source converters. Topologies of UUDAT and DUDAT are detailed. The harmonic and un-controllability issues are discussed. Control and possible application scenarios for UUDAT and DUDAT are depicted. DC fault isolation mechanism and the methods of dimensioning the voltage and power ratings of the components in UUDAT and DUDAT are studied. Extensive simulations on power system level and experiments on a UUDAT and DUDAT prototype verified their technical feasibility.

  5. Analisa Perbandingan Efisiensi Motor Dc Kompon Pendek Dengan Motor Dc Kompon Panjang Akibat Penambahan Kutub

    OpenAIRE

    Sitompul, Fuad Rahim

    2015-01-01

    Motor listrik merupakan perangkat elekromagnetis yang mengubah energi listrik menjadi energi mekanik. Motor DC memerlukan tegangan searah pada kumparan medan untuk diubah menjadi energi mekanik. Energi mekanik ini digunakan sebagai penggerak peralatan listrik seperti pompa,penggerak kipas angin, lift dan lain-lain. Karena penggunaannya yang cukup luas maka kinerjanya harus baik. Kinerja suatu motor DC dikatakan baik jika efisiensi motor tersebut tinggi. Hal itu dapat dicapai dengan mengatur b...

  6. Step-Up DC-DC converters

    DEFF Research Database (Denmark)

    Forouzesh, Mojtaba; Siwakoti, Yam P.; Gorji, Saman A.

    2017-01-01

    on the general law and framework of the development of next-generation step-up dc-dc converters, this paper aims to comprehensively review and classify various step-up dc-dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage...

  7. Pemanfaatan Polimer Hybrid Tmspma Dan Phosphor Organik Sebagai Bahan Luminesensi Untuk Solid State Lighting Planar

    Directory of Open Access Journals (Sweden)

    Fitrilawati Fitrilawati

    2015-04-01

    Full Text Available Lampu Solid State Lighting (SSL planar, diharapkan dapat menghasilkan distribusi cahaya yang lebih baik, dibandingkan dengan lampu fluoresensi biasa. Berbeda dengan lampu SSL biasa, pada SSL panel lebar (planar digunakan pendekatan kopling cahaya (Light Wave Coupling-L WC sehingga memerlukan sistem light guiding, yaitu cahaya pengeksitasi dikopling ke dalam substrat sebagai media pandu gelombang. Untuk aplikasi lampu SSL planar dengan pendekatan LWC diperlukan lapisan pengkonversi warna emisi yang berukuran lebar dengan karakteristik yang sesuai dengan perangkat preparasi dan media pandu gelombang. Media pandu gelombang yang akan digunakan adalah Light Guide Plate (LGP, dari PMMA (polymethyl methacrylate. Pada penelitian ini dikembangkan bahan luminesensi berbasis polimer hybrid trimethoxysilylpropyl methacrylate (TMSPMA, yang dimodifikasi dengan teknik kopolimerisasi dan phosphor organik. Khusus pada bahan prekursor poli(TMSPMA dilakukan uji kelarutan yang menunjukkan bahan prekursor polimer hybrid poli(TMSPMA beserta kromofor organiknya dapat larut dengan baik pada pelarut polar. Dari hasil tersebut dipilih pelarut yang tepat sehingga pembuatan lapisan tipis dari bahan luminesensi organik dapat dilakukan secara sederhana dengan teknik screen printing. Lapisan tipis yang dihasilkan dengan teknik tersebut dapat mengemisikan cahaya ke seluruh permukaan secara merata sehingga memiliki potensi untuk pengembangan model lampu SSL planar. 

  8. DC Home Appliances for DC Distribution System

    Directory of Open Access Journals (Sweden)

    MUHAMMAD KAMRAN

    2017-10-01

    Full Text Available This paper strengthens the idea of DC distribution system for DC microgrid consisting of a building of 50 apartments. Since the war of currents AC system has been dominant because of the paucity of research in the protection of the DC system. Now with the advance research in power electronics material and components, generation of electricity is inherently DC as by solar PV, fuel cell and thermoelectric generator that eliminates the rectification process. Transformers are replaced by the power electronics buck-boost converters. DC circuit breakers have solved the protection problems for both DC transmission and distribution system. In this paper 308V DC microgrid is proposed and home appliances (DC internal are modified to operate on 48V DC from DC distribution line. Instead of using universal and induction motors in rotary appliances, BLDC (Brushless DC motors are proposed that are highly efficient with minimum electro-mechanical and no commutation losses. Proposed DC system reduces the power conversion stages, hence diminishes the associated power losses and standby losses that boost the overall system efficiency. So in view of all this a conventional AC system can be replaced by a DC system that has many advantages by cost as well as by performance

  9. Step-Up DC-DC converters

    DEFF Research Database (Denmark)

    Forouzesh, Mojtaba; Siwakoti, Yam P.; Gorji, Saman A.

    2017-01-01

    on the general law and framework of the development of next-generation step-up dc-dc converters, this paper aims to comprehensively review and classify various step-up dc-dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage......DC-DC converters with voltage boost capability are widely used in a large number of power conversion applications, from fraction-of-volt to tens of thousands of volts at power levels from milliwatts to megawatts. The literature has reported on various voltage-boosting techniques, in which......-boosting techniques and associated converters are discussed in detail. Finally, broad applications of dc-dc converters are presented and summarized with comparative study of different voltage-boosting techniques....

  10. DC electric springs with DC/DC converters

    DEFF Research Database (Denmark)

    Wang, Qingsong; Cheng, Ming; Jiang, Yunlei

    2016-01-01

    The concept of DC electric spring (DCES) was recently proposed to solve the stability issue caused by integrating intermittent renewable energy sources (RESs) to DC microgrids. In this paper, a new topology of DCES is proposed based on DC/DC converters. The proposed DCES consists of a bi-directio......The concept of DC electric spring (DCES) was recently proposed to solve the stability issue caused by integrating intermittent renewable energy sources (RESs) to DC microgrids. In this paper, a new topology of DCES is proposed based on DC/DC converters. The proposed DCES consists of a bi...... and/or constant discharging for batteries is adopted and four operating modes are analyzed as charging-positive, charging-negative, discharging-positive and discharging-negative modes. An additional mechanism for fast charging or fast discharging is also designed to secure normal operation...... of batteries. With the proposed DCES, the power fluctuations due to intermittent RESs can be passed to non-critical loads (NCLs) and batteries while power on critical loads (CLs) is kept stable. This is possibly the first attempt to design a DCES with only DC/DC converters. The performances of the proposed...

  11. A resonant dc-dc power converter assembly

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a resonant DC-DC power converter assembly comprising a first resonant DC-DC power converter and a second resonant DC-DC power converter having identical circuit topologies. A first inductor of the first resonant DC-DC power converter and a second inductor of the s......The present invention relates to a resonant DC-DC power converter assembly comprising a first resonant DC-DC power converter and a second resonant DC-DC power converter having identical circuit topologies. A first inductor of the first resonant DC-DC power converter and a second inductor...... of the second resonant DC-DC power converter are configured for magnetically coupling the first and second resonant DC-DC power converters to each other to forcing substantially 180 degrees phase shift, or forcing substantially 0 degree phase shift, between corresponding resonant voltage waveforms of the first...

  12. IGBT Based DC/DC Converter

    Directory of Open Access Journals (Sweden)

    M. Akherraz

    1997-12-01

    Full Text Available This paper presents an in-depth analytical and experimental investigation of an indirect DC-DC converter. The DC-AC conversion is a full bridge based on IGBT power modules, and the AC-DC conversion is done via a high  frequency AC link and a first diode bridge. The AC link, which consists of snubbing capacitors and a variable air-gap transformer, is analytically designed to fulfill Zero Voltage commutation requirement. The proposed converter is simulated using PSPICE and a prototype is designed built and tested in the laboratory. PSPICE simulation and experimental results are presented and compared.

  13. Simulasi Jaringan Syaraf Tiruan Berbasis Metode Backpropagation Sebagai Pengendali Kecepatan Motor DC

    OpenAIRE

    Wiryadinata, Romi; Ratnawati, Dwi Ana

    2005-01-01

    Motor DC dan komputer banyak digunakan dalam kehidupan sehari-sehari, baik di rumah tangga,industri maupun lingkungan pendidikan yang sangat membutuhkan ketelitian dan penggunan yang serbaotomatis. Jaringan Syaraf Tiruan merupakan salah satu kendali motor DC yang dapat disimulasikanmenggunakan neural network toolbox pada software Matlab 6.5. Dengan menggunakan metode Backpropagationdan fungsi Gradient Descent Momentum diperoleh struktur jaringan yang terbaik, terdiri dari 5 sel neuronlapisan ...

  14. A resonant dc-dc power converter assembly

    OpenAIRE

    Madsen, Mickey Pierre

    2015-01-01

    The present invention relates to a resonant DC-DC power converter assembly comprising a first resonant DC-DC power converter and a second resonant DC-DC power converter having identical circuit topologies. A first inductor of the first resonant DC-DC power converter and a second inductor of the second resonant DC-DC power converter are configured for magnetically coupling the first and second resonant DC-DC power converters to each other to forcing substantially 180 degrees phase shift, or fo...

  15. ANALISA SISTEM KENDALI PUTARAN MOTOR DC MENGGUNAKAN SILICON CONTROLLED RECTIFIERS

    Directory of Open Access Journals (Sweden)

    M. Khairudin, Efendi, N Purwantiningsih,

    2016-01-01

    Full Text Available ABSTRAK Paper ini bertujuan untuk menganalisa rangkaian sistem kendali putaran motor menggunakan Silicon Controlled Rectifier (SCR atau Thyristor. Eksperimen sistem kendali putaran motor ini menggunakan dua rangkaian yang berbeda. Rangkaian pertama menggunakan dua sumber, yaitu sumber tegangan DC 12 v terhubung dengan motor universal secara seri dengan resistor dan SCR, sedangkan sumber tegangan DC variabel 0 sampai 1.5 v dihubung paralel dengan kapasitor dan resistor. Rangkaian kedua menggunakan satu sumber tegangan AC 5 v yang dihubungkan dengan saklar dan motor. Pada rangkaian kedua ini motor dihubungkan dengan potensio, SCR, dioda serta kapasitor yang dipasang paralel dengan sumber tegangan AC. Hasil eksperimen menunjukkan dalam rangkaian menggunakan sumber tegangan DC, motor DC akan berputar saat saklar S1 tertutup. Kondisi motor akan berputar lebih cepat ketika sumber tegangan variabel diatur lebih besar dari 0 v sehingga arus gate Ig lebih bear dari 400 mA. Adapun Eksperimen dengan sumber tegangan AC, motor akan berputar dengan menambahkan dioda D3 dan pengaturan kecepatan melalui potensio meter Rv sampai posisi maksimum. Kata kunci: analisa, motor DC, SCR, sistem kendali ABSTRACT The objective of this study is to analyse the circuit of DC motor control system using Silicon Controlled Rectifier (SCR or Thyristor. In this experiment the circuit of control system for the motor using two different circuits. The first circuit using two sources, the 12 v DC voltage is connected to universal motor and series with a resistor and SCR, while the DC variable voltage source of 0 to 1.5 v connected in parallel to the capacitor and resistor. The second circuit uses a single source of 5 V AC voltage connected to the switch and the motor. In the second circuit, the motor is connected to the potentio meter, SCR, diode and capacitor in parallel with the AC voltage source. The experimental results showed the circuit using a DC voltage source impacted the

  16. Analisis Efisiensi Pemanfaatan Makanan Oleh Larva Spodoptera Litura F dan Crocidolamia Pavonama (Lepidoptera : Noctuidae

    Directory of Open Access Journals (Sweden)

    Muhammad Sayuthi

    2016-03-01

    Full Text Available ABSTRACT. Nutrisi diperlukan oleh serangga untuk pertumbuhan dan perkembangannya, sebagai sumber energi, perbaikan jaringan dan reproduksi. Kebutuhan nutrisi serangga pada umumnya berupa :asam amino, protein, air dan  : mineral, vitamin-vitamin, asam nukleat dan nukleotida, sterol, asam lemak dan factor lipogenik. Tujuan praktikum ini adalah untuk mengetahui efisiensi pemanfaatan pakan daun brokoli, daunt alas, daun bawang, daun kangkung dan daun kacang panjang oleh larva S. litura dan C. pavonama. Bahan-bahannya adalah daun brokoli, daun bawang, daun kangkung, daun kacang panjang, dan daun bawang, Larva Spodoptera litura dan Larva C. pavonama. Rancangan percobaan yang digunakan adalah Rancangan Acak Lengkap (RAL terdiri dari 6 perlakuan (jenis pakan dan 10 ulangan. Hasil percobaan di Analisis Ragam, dan dilanjutkan dengan Uji BNT 5%. Hasil penelitian, nilai LK, dan LKR dan DC tertinggi terdapat pada daun singkong, dan terendah pada daun brokoli. Nilai LP, LPR, ECI dan ECD tertinggi pada daun brokoli, sedangkan nilai LP dan LPR terendah pada daun bawang, dan nilai ECI dan ECD terendah pada daun singkong.

  17. Full range ZVS DC-DC converter

    International Nuclear Information System (INIS)

    Upadhyay, Rinki; Badapanda, M.K.; Hannurkar, P.R.

    2011-01-01

    A 500 V, 24 Amp DC-DC converter with digital signal processor (DSP) based control and protection has been designed, fabricated and tested. Its power circuit consists of IGBT based single phase inverter bridge, ferrite transformer and diode rectifier. All IGBTs in the inverter bridge are operated in zero voltage switching (ZVS) mode to minimize switching losses thereby increasing the efficiency of the converter significantly. The efficiency of this converter is measured to be greater than 97% at full load. In a conventional full bridge inverter, typically ZVS is achieved under full load condition while at light load ZVS is lost. An auxiliary LC circuit has been intentionally incorporated in this converter to achieve ZVS even at light loaded conditions. Detailed simulation of the converter circuit is carried out and crucial waveforms have been presented in this paper. Microchip make dsPIC30F2020 DSP is employed to provide phase shifted PWMs to IGBTs in the inverter bridge. All the crucial parameters are also monitored by this DSP and in case of any unfavorable conditions, the converter is tripped off. Suitable experiments were carried out in this DC-DC converter under different loaded conditions and a close match between the simulated and experimental results were obtained. Such DC-DC converters can be connected in series or parallel for the development of solid state modular power supplies for various applications. (author)

  18. SINTESIS BIODISEL DARI MINYAK BIJI KARET DENGAN VARIASI SUHU DAN KONSENTRASI KOH UNTUK TAHAPAN TRANSESTERIFIKASI

    Directory of Open Access Journals (Sweden)

    Ratna Dewi Kusumaningtyas

    2013-05-01

    Full Text Available Bahan bakar yang paling banyak digunakan adalah bahan bakar diesel atau fatty acid methyl ester (FAME. Biodiesel berasal dari minyak nabati yang dapat diperbaharui, dapat dihasilkan secara periodik, dan mudah diperoleh. Pada penelitian ini digunakan minyak biji karet untuk sintesis FAME. Proses utama dalam pembuatan FAME adalah transesterifikasi. Penelitian ini mengkaji hasil optimum dari variasi konsentrasi katalis KOH dan suhu reaksi pada reaksi transesterifikasi. Preparasi minyak biji karet dengan menggunakan arang aktif granular diikuti dengan degumming. Reaksi esterifikasi dilaksanakan pada kondisi operasi 500 C selama 1 jam, katalis asam sulfat (98% sebesar 0,5% volume minyak, dan metanol sebesar 20% volume minyak. Reaksi transesterifikasi dilaksanakan selama 1 jam, serta perbandingan volume minyak dan metanol sebesar 4:1. Analisis kadar metil ester yang terbentuk, jumlah komponen, dan komposisinya yang terdapat pada senyawa hasil dilakukan dengan menggunakan alat GC. Kondisi operasi terbaik pada transesterifikasi minyak biji karet menjadi metil ester adalah pada katalis KOH 1% dan suhu 60 0C. Berdasarkan uji sifat-sifat fisis, metil ester yang dihasilkan belum semua memenuhi mutu sifat fisis biodiesel yang disyaratkan. The most widely used fuel is diesel fuel or fatty acid methyl ester (FAME. Biodiesel is derived from vegetable oil that can be renewed, can be produced periodically, and easy to obtain. In this research, the rubber seed was used for synthesizing the FAME. The main process in the production of FAME is transesterification. This study examined the optimum result from variations of the concentration of KOH catalyst and the reaction temperature on the transesterification reaction. Preparation of the rubber seed oil using granular activated charcoal was followed by degumming. Esterification reaction was carried out at 50 oC for 1 h with the sulfuric acid catalyst of 0.5% by volume of oil and methanol of 20% by the volume of

  19. High voltage dc cables

    Energy Technology Data Exchange (ETDEWEB)

    Bjustrom, B

    1965-12-01

    How stress distribution in dc cables varies with temperature and stress level, influence of polarity reversals and space charges, and different types of overvoltage to which dc cable may be subjected are discussed. Design problems, especially as related to corrosion protection and to mechanical stress caused by wire armoring during manufacturing and laying, accessories and work done on test methods, and the possibility of designing 400 to 600 kV dc cables for transmitting 2000 to 4000 MW are described.

  20. Imobilisasi TiO2 ke dalam Resin Penukar Kation dan Aplikasinya sebagai Fotokatalis dalam Proses Fotoreduksi Ion Hg2+

    Directory of Open Access Journals (Sweden)

    Rosyid Ridho

    2017-03-01

    Full Text Available Abstrak Dalam rangka mengembangkan bahan fotokatalitis TiO2 pada penelitian ini telah dilakukan preparasi fotokatalis TiO2-Resin yang disertai dengan karakterisasi dan uji aktivitas untuk proses fotoreduksi ion Hg(II. Preparasi imobilisasi ini dilakukan dengan metode pertukaran ion yang di ikuti dengan kalsinasi pada suhu tertentu. Pada preparasi telah dipelajari pengaruh konsentrasi Titanium Isopropoksida sebagai sumber ion Ti(IV terhadap TiO2-Resin yang dikarakterisasi dengan menggunakan Difraksi Sinar X (XRD dan Thermografimetri (TGA. Pada proses fotoreduksi ion Hg(II dipelajari pengaruh massa fotokatalis, kadar TiO2 yang terimobilisasi ke dalam resin, konsentrasi Ion Hg(II, dan pengaruh pH. Proses fotoreduksi dilakukan dalam suatu reaktor tertutup yang dilengkapi dengan lampu UV, yaitu dengan cara menyinari campuran yang terdiri dari larutan ion Hg(II dan serbuk fotokatalis TiO2-Resin, disertai dengan pengadukan selama waktu tertentu. Hasil fotoreduksi dihitung berdasarkan selisih antara konsentrasi ion Hg(II awal dengan ion Hg(II yang tak tereduksi. Penentuan konsentrasi ion Hg(II yang tak tereduksi dilakukan dengan menggunakan Spektrofotometer Serapan Atom (SSA teknik pembangkitan uap dingin atau Cold Vapor Atomic Absorption Spectrophotometry(CV-AAS. Hasil preparasi menunjukkan semakin tinggi konsentrasi Titanium Isopropoksida yang ditambahkan pada resin semakin tinggi juga kadar TiO2 yang terbentuk pada TiO2-Resin. Hasil uji fotokatalis menunjukkan bahwa penggunaan fotokatalis TiO¬2-Resin dapat meningkatkan hasil fotoreduksi ion Hg(II yang peningkatannya lebih tinggi dibandingkan TiO2 serbuk. Penambahan fotokatalis dengan massa yang semakin besar menambah efektivitas fotoreduksi terhadap ion Hg(II yang semakin besar, namun jika ditambahkan massa fotokatalis yang lebih tinggi lagi akan menurunkan efektivitas fotoreduksi terhadap ion Hg(II. Kenaikan konsentrasi Hg(II menyebabkan efektivitas fotoreduksi semakin rendah. Pada pH 1-4 terjadi

  1. Family of multiport bidirectional DC-DC converters

    NARCIS (Netherlands)

    Tao, H.; Kotsopoulos, A.; Duarte, J.L.; Hendrix, M.A.M.

    2006-01-01

    Multiport DC-DC converters are of potential interest in applications such as generation systems utilising multiple sustainable energy sources. A family of multiport bidirectional DC-DC converters derived from a general topology is presented. The topology shows a combination of DC-link and magnetic

  2. Programmable dc motor controller

    Science.gov (United States)

    Hopwood, J. E.

    1982-11-01

    A portable programmable dc motor controller, with features not available on commercial instruments was developed for controlling fixtures during welding processes. The controller can be used to drive any dc motor having tachometer feedback and motor requirements not exceeding 30 volts, 3 amperes. Among the controller's features are delayed start time, upslope time, speed, and downslope time.

  3. The noise-time of response compromise in d.c. period meters. A new type of circuit (1961); Le compromis bruit-temps de reponse dans les periodemetres a courant continu. un nouveau type de circuit (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Friedling, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    The report compares the characteristics of three period meter circuits: - a linear circuit - a circuit which is non-linear according to the nuclear reactor period - a circuit which is non-linear according to the period and the power of the reactor. This last type of reactor has a fast time of response if the power is high or if the period is short, and it has a slow time of response when the power is low and the period long; this system makes it possible to maintain the noise at an acceptable level under all normal working conditions of the reactor. (author) [French] Le rapport compare les caracteristiques de trois circuits de periodemetres: - un circuit lineaire; - un circuit non lineaire selon la periode du reacteur nucleaire; - un circuit non lineaire selon la periode et la puissance du reacteur. Ce dernier type de circuit a un court temps de reponse si la puissance est faible et la periode grande; ce systeme permet de limiter le bruit a des niveaux acceptables dans toutes les conditions normales de fonctionnement du reacteur. (auteur)

  4. Multilevel DC link inverter

    Science.gov (United States)

    Su, Gui-Jia

    2003-06-10

    A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

  5. Bidirectional dc-to-dc Power Converter

    Science.gov (United States)

    Griesbach, C. R.

    1986-01-01

    Solid-state, series-resonant converter uses high-voltage thyristors. Converter used either to convert high-voltage, low-current dc power to lowvoltage, high current power or reverse. Taking advantage of newly-available high-voltage thyristors to provide better reliability and efficiency than traditional converters that use vacuum tubes as power switches. New converter essentially maintenance free and provides greatly increased mean time between failures. Attractive in industrial applications whether or not bidirectional capability is required.

  6. A DC Transformer

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the project was to demonstrate a true direct current (DC) transformer, a new electro-mechanical component with potentially high power applications; in...

  7. Desain dan Implementsi Soft Switching Boost Konverter dengan Simple Auxillary Resonant Switch (Sarc)

    OpenAIRE

    Saputra, Dimas Bagus; Suryoatmojo, Heri; Musthofa, Arif

    2016-01-01

    Boost konverter merupakan penaik tegangan DC ke tegangan DC yang mempunyai tegangan output yang lebih tinggi dibanding inputnya. Penggunaan boost konverter diera modern semakin meningkat dan dibuat dengan dimensi yang lebih kecil, berat yang lebih ringan dan efisiensi yang lebih tinggi dibanding dengan boost konverter generasi terdahulu. Tetapi rugi-rugi periodik saat on/off meningkat. Untuk meraih kriteria tersebut, teknik hard switching boost konverter berevolusi menjadi teknik soft switchi...

  8. Three new DC-to-DC Single-Switch Converters

    Directory of Open Access Journals (Sweden)

    Barry W. Williams

    2017-06-01

    Full Text Available This paper presents a new family of three previously unidentified dc-to-dc converters, buck, boost, and buck-boost voltage-transfer-function topologies, which offer advantageous transformer coupling features and low capacitor dc voltage stressing. The three single-switch, single-diode, converters offer the same features as basic dc-to-dc converters, such as the buck function with continuous output current and the boost function with continuous input current. Converter time-domain simulations and experimental results (including transformer coupling support and extol the dc-to-dc converter concepts and analysis presented.

  9. Perancangan Zeta Converter yang dilengkapi Power Factor Correction pada Aplikasi Pengaturan Kecepatan Motor Brushless DC

    Directory of Open Access Journals (Sweden)

    Adhika Prajna Nandiwardhana

    2017-01-01

    Full Text Available Penggunaan motor brushless DC telah banyak digunakan dalam berbagai bidang seperti peralatan rumah tangga maupun industri dikarenakan motor ini memiliki struktur yang sederhana, efisiensi dan torsi yang tinggi, serta menggunakan konsep komutasi elektris yang berbeda dari motor DC lainnya. Namun pengoperasian pada umumnya yang menggunakan sumber AC, penyearah serta inverter membuat tingginya nilai harmonisa arus (THD sebesar 73,33% dan power factor sebesar 0,803 dimana nilai ini kurang baik dalam pengaplikasiannya. Pada penelitian ini akan dikaji mengenai proses power factor correction yang mereduksi harmonisa arus (THD sumber AC dengan menggunakan zeta converter dalam pengaplikasian motor brushless DC, serta pengoperasian motor dengan mengamati respon motor terhadap kecepatan referensi yang berubah-ubah dan mengamati kestabilan motor terhadap pembebanan yang bervariasi. Dalam menerapkan metode yang dilakukan pada penelitian ini, pengoperasian motor brushless DC yang telah dirancang dapat bekerja dengan baik meliputi respon motor yang dapat mengikuti kecepatan referensi yang berubah-ubah, serta kestabilan motor dalam mempertahankan kecepatannya pada pembebanan yang bervariasi. Proses power factor correction dapat meningkatkan kualitas daya pada berbagai kecepatan dan mode penerapan yang berbeda-beda, dimana peningkatan tersebut membuktikan kinerja yang baik dalam sistem ini dan memiliki nilai kualitas daya yang baik.

  10. Three-port DC-DC converter with new integrated transformer for DC Distribution Systems

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Andersen, Michael A. E.

    2014-01-01

    A new integrated transformer for three-port dc-dc converter is proposed to overcome the power coupling effect existed in some known multiple inputs dc-dc converters. Orthogonal primary windings arrangement and in series connection of diagonal secondary Windings enables a fully power decoupling...

  11. Pengaruh Penambahan Kutub Bantu Pada Motor Arus Searah Penguatan Seri Dan Shunt Untuk Memperkecil Rugi-Rugi

    OpenAIRE

    Fahni, Al Magrizi

    2015-01-01

    Penggunaan motor DC akhir-akhir ini mengalami perkembangan, khususnya dalam pemakaiannya sebagai motor penggerak. Terutama untuk menggerakkan beban yang berat dan bervarisasi. Oleh sebab itu, diharapkan motor DC dapat bekerja secara efisien. Pada saat motor DC dibebani, akan mengalir arus jangkar yang mengakibatkan terjadinya reaksi jangkar. Arus jangkar yang terlalu besar akan mengakibat timbulnya rugi-rugi daya pada motor DC, salah satu cara untuk memperkecil rugi-rugi day...

  12. 75 FR 23571 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-05-04

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10... amends Sec. 39.13 by adding the following new AD: 2010-09-12 McDonnell Douglas Corporation: Amendment 39... to McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A...

  13. Design and Testing of Boost Type DC/DC Converter for DC Motor Control Applications

    OpenAIRE

    Samman, Faizal Arya; Akil, Yusri Syam; Noor, Nirwan A.

    2017-01-01

    in The Proceeding of The 2nd International Symposium on Smart Material and Mechatronics 2015 This paper presents the design and testing of a boost type DC/DC converter circuit, which can be used for DC motor control applications. The Boost converter is designed using DC chopper and DC chopper cascade configurations. The experimental setup was made by connecting the boost converter circuit with four types of DC motor, i.e. self-excited DC motor shunt, series, compound and separately exci...

  14. Control of improved full-bridge three-level DC/DC converter for wind turbines in a DC grid

    DEFF Research Database (Denmark)

    Deng, Fujin; Chen, Zhe

    2013-01-01

    transformer in the IFBTL dc/dc converter. A modulation strategy, including two operation modes, is proposed for the IFBTL dc/dc converter. Then, a voltage balancing control strategy is proposed for the IFBTL dc/dc converter. Furthermore, the control of the wind turbine based on the IFBTL dc/dc converter......This paper presents an improved full-bridge three-level (IFBTL) dc/dc converter for a wind turbine in a dc grid by inserting a passive filter into the dc/dc converter to improve the performance of the converter. The passive filter can effectively reduce the voltage stress of the medium frequency...

  15. Overview of Multi-DC-Bus Solutions for DC Microgrids

    DEFF Research Database (Denmark)

    Ricchiuto, D.; Mastromauro, R.A.; Liserre, Marco

    2013-01-01

    DC Microgrids have recently received a lot of attention in the last years due to high penetration of renewable energy sources as well as distributed energy storage systems. In the future DC microgrids could be preferable respect to AC microgrids in terms of redundancy since multi-DC-Bus solutions...... could provide a continuative power supply to the loads. An overview of Multi-DC-Bus solutions is presented in this paper. The performances are compared on the basis of possible DC microgrid configurations, redundancy, different DC voltage levels....

  16. Pengaruh Konsentrasi dan Lama Aplikasi Sodium Hipoklorit (NaOCL sebagai Bahan Irigasi Saluran Akar terhadap Kekuatan Geser Perlekatan Siler Berbahan Dasar Resin Pada Dentin Saluran Akar

    Directory of Open Access Journals (Sweden)

    Tunjung Nugraheni

    2012-07-01

    Full Text Available Latar belakang. Salah satu tahap penting perawatan saluran akar yaitu preparasi saluran akar. Pada preparasi saluran akar digunakan bahan Irigasi sodium hipoklorit (NaOCI, dengan konsentrasi 0,5%-5.25%. Penggunaan NaOCL berpengaruh pada struktur permukaan dentin saluran akar, yang selanjutnya mempengaruhi perlekatan dentin saluran akar dengan bahan pengisi saluran akar. Penelitian ini bertujuan untuk mengetahui pengaruh konsentrasi dan lama aplikasi NaOCI terhadap kekuatan geser perlekatan siler berbahan dasar resin pada dentin saluran akar. Metode Penelitian. Tiga puluh gigi premolar dipotong arah bukolingual, jaringan pulpa dibersihkan dan permukaan dentin saluran akar diratakan. Gigi difiksasi resin akrilik, sisi dentin saluran akar menghadap ke atas. Sampel dibagi menjadi 2 kelompok masing-masing 15 gigi, kelompok 1 di rendam dalam 6ml NaOCI 2,5%. Kelompok II direndam dalam 6 ml NaOCI 5%. Kelompok I dan II dibagi menjadi 3 sub kelompok lama perendaman, yaitu sub kelompok a direndam selama 5 menit, sub kelompok diremdam selama 10 menit, sub kelompok direndam selama 15 menit. Cetakan siler difiksasi pada akar gigi, dilakukan insersi siler ke dalam cetakan kemudian dimasukkan inkubaror pada suhu 370 C selama 72 jam. Pengujian kekuatan geser perlekatan menggunakan Universal Testing Machine. Hasil penelitian. Hasil uji statistik AVANA dua jalur menunjukkan kekuatan geser perlekatan siler berbahan dasar resin pada dentin saluran akar setelah diirigasi dengan konsentrasi NaOCI dan lama irigasi yang berbeda terdapat perbedaan yang bermakna (p=0,007. Uji LSD menunjukkan bahwa kekuatan geser perlekatan siler berbahan dasar resin berbeda bermakna pada kelompok yang diirigasi NaOCI 2,5% selama 5 menit dengan 15 menit,, pada kelompok yang diirigasi NaOCI 2,5% selama 10 menit dengan 15 menit, pada kelompok yang diirigasi NaOCI 5% selama 15 menit dengan kelompok yang diirigasi NaOCI 2,5% selama 15 menit serta pada kelompok yang diirigasi NaOCI 5% selama 5

  17. Multi Bus DC-DC Converter in Electric Hybrid Vehicles

    Science.gov (United States)

    Krithika, V.; Subramaniam, C.; Sridharan, R.; Geetha, A.

    2018-04-01

    This paper is cotncerned with the design, simulation and fabrication of the prototype of a Multi bus DC- DC converter operating from 42V DC and delivering 14V DC and 260V DC. As a result, three DC buses are interconnected through a single power electronic circuitry. Such a requirement is energized in the development of a hybrid electric automobile which uses the technology of fuel cell. This is implemented by using a Bidirectional DC-DC converter configuration which is ideally suitable for multiple outputs with mutual electrical isolation. For the sake of reduced size and cost of step-up transformer, selection of a high frequency switching cycle at 10 KHz was done.

  18. dc Arc Fault Effect on Hybrid ac/dc Microgrid

    Science.gov (United States)

    Fatima, Zahra

    The advent of distributed energy resources (DER) and reliability and stability problems of the conventional grid system has given rise to the wide spread deployment of microgrids. Microgrids provide many advantages by incorporating renewable energy sources and increasing the reliability of the grid by isolating from the main grid in case of an outage. AC microgrids have been installed all over the world, but dc microgrids have been gaining interest due to the advantages they provide over ac microgrids. However the entire power network backbone is still ac and dc microgrids require expensive converters to connect to the ac power network. As a result hybrid ac/dc microgrids are gaining more attention as it combines the advantages of both ac and dc microgrids such as direct integration of ac and dc systems with minimum number of conversions which increases the efficiency by reducing energy losses. Although dc electric systems offer many advantages such as no synchronization and no reactive power, successful implementation of dc systems requires appropriate protection strategies. One unique protection challenge brought by the dc systems is dc arc faults. A dc arc fault is generated when there is a gap in the conductor due to insulation degradation and current is used to bridge the gap, resulting in an arc with very high temperature. Such a fault if it goes undetected and is not extinguished can cause damage to the entire system and cause fires. The purpose of the research is to study the effect of the dc arc fault at different locations in the hybrid ac/dc microgrid and provide insight on the reliability of the grid components when it is impacted by arc faults at various locations in the grid. The impact of dc arc fault at different locations on the performance of the PV array, wind generation, and constant power loads (CPL) interfaced with dc/dc converters is studied. MATLAB/Simulink is used to model the hybrid ac/dc microgrid and arc fault.

  19. Early Oscillation Detection for DC/DC Converter Fault Diagnosis

    Science.gov (United States)

    Wang, Bright L.

    2011-01-01

    The electrical power system of a spacecraft plays a very critical role for space mission success. Such a modern power system may contain numerous hybrid DC/DC converters both inside the power system electronics (PSE) units and onboard most of the flight electronics modules. One of the faulty conditions for DC/DC converter that poses serious threats to mission safety is the random occurrence of oscillation related to inherent instability characteristics of the DC/DC converters and design deficiency of the power systems. To ensure the highest reliability of the power system, oscillations in any form shall be promptly detected during part level testing, system integration tests, flight health monitoring, and on-board fault diagnosis. The popular gain/phase margin analysis method is capable of predicting stability levels of DC/DC converters, but it is limited only to verification of designs and to part-level testing on some of the models. This method has to inject noise signals into the control loop circuitry as required, thus, interrupts the DC/DC converter's normal operation and increases risks of degrading and damaging the flight unit. A novel technique to detect oscillations at early stage for flight hybrid DC/DC converters was developed.

  20. Thyristors for dc transmission

    Energy Technology Data Exchange (ETDEWEB)

    1966-05-06

    As a first stage towards determining the feasibility of applying thyristors to hvdc converter terminals, the Westinghouse Electric Corporation has built a converter laboratory capable of testing thyristors under conditions similar to those which would have to be met in a 200 kV dc system. The equipment has been designed to test a 5 kV 600 A group of thyrisotrs, elevated 200 kV above earth. This rating has been chosen so that there would be a sufficient number of thyristors in series to enable the gating and voltage division characteristics to be investigated and at the same time the group could be operated at a potential equivalent to a complete 200 kV dc bridge.

  1. PEMBUATAN SISTEM PENGATURAN PUTARAN MOTOR DC MENGGUNAKAN KONTROL PROPORTIONAL-INTEGRAL-DERIVATIVE (PID DENGAN MEMANFAATKAN SENSOR KMZ51

    Directory of Open Access Journals (Sweden)

    L Khakim

    2013-07-01

    Full Text Available Penelitian ini adalah penelitian pengembangan desain rancang bangun sistem pengendalian otomatis yang digerakkan dengan dua motor DC sehingga mampu mempertahankan kelembaman pada arahnya. Sistem otomatis ini terdiri dari sensor KMZ51 sebagai komponen feedback dan dua motor DC sebagai komponen plant. Pengujian dari sistem otomatis dibagi menjadi tiga yaitu pengujian sensor KMZ51, pengujian PWM sebagai penggerak motor DC dan pengujian performansi kontrol PID. Hasil pengujian menunjukkan nilai ketelitian sensor 99.17%. Pada pengujian PWM diperoleh error pengukuran 1.07% dan pengujian performansi sistem didapatkan bahwa penerapan kontrol PID dapat mengatur putaran motor DC sehingga model sistem mampu mempertahankan arahnya pada set point yang telah ditentukan dengan nilai overshoot maximum kurang dari 10%, rise time 2 detik dan settling time kurang dari 5% yang diperoleh pada Kp= 27, Ki= 6, dan Kd= 40 menggunakan metode trial and error. This research is design of automatic control system which driven by two DC motors that can keep the inertia of direction. The system is composed of sensor KMZ51 as feedback component and two DC motors as plant component. Testing of the automated system divided into three, KMZ51 sensor testing, PWM testing as drive DC motors, and performance testing of PID control system. The results show that the sensor accuracy values 99.17%, on testing the PWM measurement error obtained 1.07%, and testing of performance system obtained that the application of PID control can adjust DC motors rotation so that the model system is able to maintain direction the set point specified with maximum overshoot less than 10%, rise time of 2 seconds and settling time less than 5% were obtained at Kp= 27, Ki= 6, and Kd= 40 using trial and error method

  2. TOPOLOGICAL REVIEW AND ANALYSIS OF DC-DC BOOST CONVERTERS

    Directory of Open Access Journals (Sweden)

    V. INDRA GANDHI

    2017-06-01

    Full Text Available DC voltage boost up is essential in numerous applications; especially considering Photovoltaic (PV based renewable power generation system. The conventional DC-DC boost converter is the most admired configuration for this scheme, even if the converter efficiency is restricted at duty cycle near to maximum value. In order to find solution to the problem and improve its conversion capability, many converter configurations have been implemented so far. With this circumstance, this research work proposes to give overview of a few most imperative research works related to DC-DC boost converters. Some configurations are covered and classified basically based on the application. The major benefits and disadvantages related to the available techniques are also briefly conveyed. At last, a proper evaluation is recognized among the important types of DC-DC boost converters in terms of efficiency, number of components, and stability.

  3. An Integrated Multifunctional Bidirectional AC/DC and DC/DC Converter for Electric Vehicles Applications

    OpenAIRE

    Liwen Pan; Chengning Zhang

    2016-01-01

    This paper presents an on-board vehicular battery charger that integrates bidirectional AC/DC converter and DC/DC converter to achieve high power density for application in electric vehicles (EVs). The integrated charger is able to transfer electrical energy between the battery pack and the electric traction system and to function as an AC/DC battery charger. The integrated charger topology is presented and the design of passive components is discussed. The control schemes are developed for m...

  4. Pembuatan Adhesive Bridge dengan Fiber Reinforced Composite untuk Perawatan Kehilangan dan Kegoyahan Gigi Anterior Rahang Bawah

    Directory of Open Access Journals (Sweden)

    Demmy Wijaya

    2014-06-01

    Full Text Available Salah satu perawatan kehilangan gigi anterior untuk tujuan estetis adalah dengan adhesive bridge. Fiber Reinforced Composite (FRC adalah bahan struktural yang terdiri dari 2 konstituen yang berbeda. Komponen penguat (fiber memberikan kekuatan dan kekakuan, sedangkan matriks (resin komposit mendukung penguatan. Bahan FRC dapat digunakan untuk pembuatan adhesive bridge dan juga dapat digunakan sebagai stabilisasi gigi yang mengalami kegoyahan. Adanya gigi pendukung yang sehat juga sangat membantu keberhasilan perawatan ini. Laporan kasus ini bertujuan untuk memberikan informasi tentang penatalaksanaan perawatan kehilangan dan kegoyahan gigi anterior rahang bawah menggunakan FRC. Seorang pasien laki-laki berusia 33 tahun datang ke klinik Prostodonsia RSGM Prof. Soedomo ingin dibuatkan gigi tiruan. Pasien kehilangan gigi 31, gigi 32, gigi 41 dan mengalami kegoyahan derajat 2 disertai resesi gingiva. Kondisi tersebut akibat pasca pembuatan gigi tiruan di tukang gigi. Pasien tidak ingin giginya yang goyah dilakukan pencabutan. Tatalaksana kasus: pencetakan rahang untuk model diagnostik, pembuatan mock-up pontik gigi 31 pada model diagnostik, pembuatan index dengan mencetak bagian lingual dan 1/3 incisal menggunakan putty, preparasi gigi penyangga (gigi 32, 33, 41, 42, 43, pemasangan fiber dengan bantuan index putty, pembentukan bagian labial pontik dengan komposit, finishing dan polishing. Kesimpulan: Fiber reinforced composite dapat dipakai untuk pengelolaan pasien yang mengalami kehilangan dan kegoyahan gigi anterior rahang bawah. Adhesive Bridge of Fiber Reinforced Composite to Treat Tooth Missing and Luxation of Lower Anterior Teeth. One of the anterior tooth loss treatments for esthetic purposes is the adhesive bridge. Fiber Reinforced Composite (FRC is a structural material that consists of two different constituencies. Amplifier components (fiber provide strength and stiffness, while matrix (resin composite support reinforcement. FRC materials

  5. Pengaruh Penambahan Kutub Bantu Pada Motor Arus Searah Penguatan Seri Dan Shunt Untuk Memperkecil Rugi-Rugi (Aplikasi pada Laboratorium Konversi Energi Listrik FT-USU)

    OpenAIRE

    Fahni, Al Magrizi

    2015-01-01

    Penggunaan motor DC akhir-akhir ini mengalami perkembangan, khususnya dalam pemakaiannya sebagai motor penggerak. Terutama untuk menggerakkan beban yang berat dan bervarisasi. Oleh sebab itu, diharapkan motor DC dapat bekerja secara efisien. Pada saat motor DC dibebani, akan mengalir arus jangkar yang mengakibatkan terjadinya reaksi jangkar. Arus jangkar yang terlalu besar akan mengakibat timbulnya rugi-rugi daya pada motor DC, salah satu cara untuk memperkecil rugi-rugi day...

  6. On and off controlled resonant dc-dc power converter

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a resonant DC-DC power converter comprising an input side circuit comprising a positive and a negative input terminal for receipt of an input voltage or current and an output side circuit comprising positive and negative output terminals for supply of a converter...... output voltage and connection to a converter load. The resonant DC-DC power converter further comprises a rectification circuit connected between an output of a resonant network and the output side circuit. The resonant network is configured for alternatingly being charged from the input voltage...... or current and discharged through the rectification circuit by a first controllable switch arrangement in accordance with a first switch control signal. A second controllable switch arrangement of the resonant DC-DC power converter is configured to select a first impedance characteristic of the resonant...

  7. DC Cable for Railway

    Science.gov (United States)

    Tomita, Masaru

    The development of a superconducting cable for railways has commenced, assuming that a DC transmission cable will be used for electric trains. The cable has been fabricated based on the results of current testing of a superconducting wire, and various evaluation tests have been performed to determine the characteristics of the cable. A superconducting transmission cable having zero electrical resistance and suitable for railway use is expected to enhance regeneration efficiency, reduce power losses, achieve load leveling and integration of sub-stations, and reduce rail potential.

  8. Auxiliary resonant DC tank converter

    Science.gov (United States)

    Peng, Fang Z.

    2000-01-01

    An auxiliary resonant dc tank (ARDCT) converter is provided for achieving soft-switching in a power converter. An ARDCT circuit is coupled directly across a dc bus to the inverter to generate a resonant dc bus voltage, including upper and lower resonant capacitors connected in series as a resonant leg, first and second dc tank capacitors connected in series as a tank leg, and an auxiliary resonant circuit comprising a series combination of a resonant inductor and a pair of auxiliary switching devices. The ARDCT circuit further includes first clamping means for holding the resonant dc bus voltage to the dc tank voltage of the tank leg, and second clamping means for clamping the resonant dc bus voltage to zero during a resonant period. The ARDCT circuit resonantly brings the dc bus voltage to zero in order to provide a zero-voltage switching opportunity for the inverter, then quickly rebounds the dc bus voltage back to the dc tank voltage after the inverter changes state. The auxiliary switching devices are turned on and off under zero-current conditions. The ARDCT circuit only absorbs ripples of the inverter dc bus current, thus having less current stress. In addition, since the ARDCT circuit is coupled in parallel with the dc power supply and the inverter for merely assisting soft-switching of the inverter without participating in real dc power transmission and power conversion, malfunction and failure of the tank circuit will not affect the functional operation of the inverter; thus a highly reliable converter system is expected.

  9. PENGGUNAAN FUZZY LOGIC UNTUK KONTROL PARALLEL CONVERTER DC-DC

    Directory of Open Access Journals (Sweden)

    Bambang Prio Hartono

    2012-09-01

    Full Text Available Abstract: Using system fuzzy logic as control  technology have been used on low load dc-dc converter with combined parallel compiled  dc-dc converter can  obtain big load.   With existence of differrence of component parameter and each parallel compiled converter can obtained different current  and voltage output.  Function of controller  for to do adjustment, so that current which is applied  to  load by each converter  can be obtained  difference error as small as possible or same. The object of research is developing design of large signal dc-dc converter which is  combined with using  FLC so that  obtain  better performance.  To get better performance have been made plant model and simulation with CDE method.  The more systematic  system and design is needed to overcome bigger load  on dc-dc converter, so that parallel  compiled current master slave control system on dc-dc converter with using fuzzy logic  controller is used. Result of  research showed that error or difference of  current  which is applied to load can handled by fuzzy logic  controller.  Technic of current and voltage controller co to do adjustment current and voltage distribution  equally to load.  Distribution of iL1,iL2 and  output voltage Vo on dc-dc  converter with load 2,25 until  7,875 and voltage  100  until 120 volt,  load current beetwen  12 until 48, % relatif  error  Vo  0,4% until  0,9%.

  10. Perancangan Rectenna (Rectifier Antenna) Sebagai Pengubah Daya Elektromagnetik Menjadi Output DC Pada Frekuensi Wifi 2.4 Ghz

    OpenAIRE

    Ali Mustofa, ST., MT., Ahmad Fauzi., Rudy Yuwono, ST., M.Sc

    2014-01-01

    Penelitian ini membahas tentang perancangan dan pembuatan rectenna (rectifier antenna) sebagai pengubah daya elektromagnetik menjadi output DC yang bekerja pada frekuensi wifi 2.4 Ghz. Pemanenan energi ini merupakan salah satu alternatif konversi energi, di mana melalui proses ini dapat menghasilkan daya listrik yang dapat digunakan pada perangkat yang membutuhkan daya yang kecil. Dalam proses perancangan dan pembuatan rectenna ini dilakukan simulasi dengan menggunakan software Multisim 11 un...

  11. Step-Up DC-DC Power Converter

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a step-up DC-DC power converter which comprises a primary side circuit and a secondary side circuit coupled through a galvanic isolation barrier. The primary side circuit comprises a positive and a negative input terminal for receipt of an input voltage and an input...... being charged from the input voltage and discharged to the output capacitor through the galvanic isolation barrier in accordance with a switch control signal to produce the converter output voltage. The step-up DC-DC power converter comprises an electrical short-circuit connection across the galvanic...

  12. DC Distribution Systems and Microgrids

    DEFF Research Database (Denmark)

    Dragicevic, Tomislav; Anvari-Moghaddam, Amjad; Quintero, Juan Carlos Vasquez

    2017-01-01

    summarized. Due to its attractive characteristics in terms of compliance with modern generation, storage and electronic load technologies, high reliability and current carrying capacity, as well as simple control, DC systems are already an indispensable part of power systems. Moreover, the existing......A qualitative overview of different hardware topologies and control systems for DC MGs has been presented in this chapter. Some challenges and design considerations of DC protections systems have also been discussed. Finally, applications of DC MGs in emerging smart grid applications have been...... challenges such as protection issues will be effectively resolved in the near future due to fast progress of semiconductor technology which is a key enabler cheap and reliable future DC solid-state protection systems. Therefore, it is the view of the author that more and more DC systems will appear...

  13. Analisis Penalaan Kontrol PID pada Simulasi Kendali Kecepatan Putaran Motor DC Berbeban menggunakan Metode Heuristik

    Directory of Open Access Journals (Sweden)

    WALUYO WALUYO

    2017-06-01

    Full Text Available ABSTRAK Motor DC banyak digunakan di industri kecil dan besar.Kecepatan motor DC sering tidak stabil akibat gangguan dari luar maupun perubahan parameter dan torsi beban sehingga perlu dilakukan rancangan kontroler.Kontroler yang dirancang menggunakan PID yang terdiri dari tiga jenis cara pengaturan yang dikombinasikan, yaitu kontrol P (Proportional, kontrol I (Integral dan kontrol D (Derivatif.Kontroler yang dirancang disimulasikan menggunakan perangkat lunak. Hasil simulasi menunjukan kontroler PID untuk kendali kecepatan motor DC ini menghasilkan kondisi robust (kokoh saat nilai Kp = 1,1, Ti = 0,1, Td = 3,7. Hasil dari parameter kendali yang dirancang memiliki error steady state 0,99 % dan dengan settling time 3,7 detik pada rise time 2,00 detik dan nilai peak terletak pada 0,99. Kecepatan awal yang dihasilkan mendekati set point yang diinginkan pada detik ke 6 dan kecepatannya tidak ada penurunan atau tetap konstan sampai dengan detik ke 100. Kata kunci : Motor DC, PID, Heuristik, Steady State, Rise Time   ABSTRACT DC motors are widely used in small and large industries. Their speeds are often unstable due to interference from outside or change the parameters and load torque, so that it was necessary to design a controller. The controller was designed using a PIDconsists of three types of arrangements, which are mutually combined way, namely the control P (Proportional, control I (Integral and control D (Derivative. The controllers were designed using software for simulation. The simulation results showed the PID controller for DC motor speed control produced robust conditionswhen the value of Kp, Ti and Tdwere 1.1,  0.1 and 3.7 respectively. The results of the control parameters had error steady state 0.99 % and the settling time of 3.7 seconds at 2.0 sec rise time and the peak value was 0,99. The resulted initial velocity was very fast to approach the desired set point in the sixth second and its speed was remain constant until 100

  14. Analisis Penalaan Kontrol PID pada Simulasi Kendali Kecepatan Putaran Motor DC Berbeban menggunakan Metode Heuristik

    Directory of Open Access Journals (Sweden)

    WALUYO WALUYO

    2013-07-01

    Full Text Available ABSTRAK Motor DC banyak digunakan di industri kecil dan besar.Kecepatan motor DC sering tidak stabil akibat gangguan dari luar maupun perubahan parameter dan torsi beban sehingga perlu dilakukan rancangan kontroler.Kontroler yang dirancang menggunakan PID yang terdiri dari tiga jenis cara pengaturan yang dikombinasikan, yaitu kontrol P (Proportional, kontrol I (Integral dan kontrol D (Derivatif.Kontroler yang dirancang disimulasikan menggunakan perangkat lunak. Hasil simulasi menunjukan kontroler PID untuk kendali kecepatan motor DC ini menghasilkan kondisi robust (kokoh saat nilai Kp = 1,1, Ti = 0,1, Td = 3,7. Hasil dari parameter kendali yang dirancang memiliki error steady state 0,99 % dan dengan settling time 3,7 detik pada rise time 2,00 detik dan nilai peak terletak pada 0,99. Kecepatan awal yang dihasilkan mendekati set point yang diinginkan pada detik ke 6 dan kecepatannya tidak ada penurunan atau tetap konstan sampai dengan detik ke 100. Kata kunci: Motor DC, PID, Heuristik, Steady State, Rise Time   ABSTRACT DC motors are widely used in small and large industries. Their speeds are often unstable due to interference from outside or change the parameters and load torque, so that it was necessary to design a controller. The controller was designed using a PIDconsists of three types of arrangements, which are mutually combined way, namely the control P (Proportional, control I (Integral and control D (Derivative. The controllers were designed using software for simulation. The simulation results showed the PID controller for DC motor speed control produced robust conditionswhen the value of Kp, Ti and Tdwere 1.1,  0.1 and 3.7 respectively. The results of the control parameters had error steady state 0.99 % and the settling time of 3.7 seconds at 2.0 sec rise time and the peak value was 0,99. The resulted initial velocity was very fast to approach the desired set point in the sixth second and its speed was remain constant until 100

  15. Very High Frequency Half Bridge DC/DC Converter

    DEFF Research Database (Denmark)

    Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.

    2014-01-01

    This paper presents the first, off chip, class DE (resonant half bridge) converter working in the Very High Frequency (VHF) range. The benefits of using half bridge circuits both in the inverter and rectifier part of a VHF resonant dc/dc converter are analyzed and design equations for all...

  16. SCM Handbooks for dc-to-dc Converters

    Science.gov (United States)

    Lee, F.; Mohmoud, M.; Yu, Y.

    1984-01-01

    Two documents aid in design of control modules for dc-to-dc converters. Features of SCM include: Adaptive stability, power component stress limiting, implementation of various control laws, unified design approach. Analysis and quidelines contained in handbooks enable engineer to design SCM circuit and confidently predict resulting overall performance.

  17. Sheppard-Taylor Isolated High Boost DC-DC Converter

    DEFF Research Database (Denmark)

    Chub, Andrii; Siwakoti, Yam Prasad; Vinnikov, Dmitri

    2017-01-01

    This paper presents a new galvanically isolated step-up dc-dc converter intended for low-power but high step-up applications. The proposed converter is capable of regulating output voltage within a wide range of the input voltage or load variations. In contrast to competitors, the converter can...

  18. Dc-To-Dc Converter Uses Reverse Conduction Of MOSFET's

    Science.gov (United States)

    Gruber, Robert P.; Gott, Robert W.

    1991-01-01

    In modified high-power, phase-controlled, full-bridge, pulse-width-modulated dc-to-dc converters, switching devices power metal oxide/semiconductor field-effect transistors (MOSFET's). Decreases dissipation of power during switching by eliminating approximately 0.7-V forward voltage drop in anti-parallel diodes. Energy-conversion efficiency increased.

  19. A Current-Fed Isolated Bidirectional DC-DC Converter

    DEFF Research Database (Denmark)

    Sun, Xiaofeng; Wu, Xiaoying; Shen, Yanfeng

    2017-01-01

    This paper proposes a current-fed isolated bidirectional DC-DC converter (CF-IBDC) which has the advantages of wide input voltage range, low input current ripple, low conduction losses, and soft switching over the full operating range. Compared with conventional CF-IBDCs, the voltage spikes...

  20. Power flow analysis for DC voltage droop controlled DC microgrids

    DEFF Research Database (Denmark)

    Li, Chendan; Chaudhary, Sanjay; Dragicevic, Tomislav

    2014-01-01

    This paper proposes a new algorithm for power flow analysis in droop controlled DC microgrids. By considering the droop control in the power flow analysis for the DC microgrid, when compared with traditional methods, more accurate analysis results can be obtained. The algorithm verification is ca...

  1. Meet EPA's Dan Nelson

    Science.gov (United States)

    EPA’s Dan Nelson is the Director of the Human Research Protocol Office at the National Health and Environmental Effect Research Laboratory, Dan works to protect the rights and welfare of EPA’s research participants.

  2. A DC Transformer

    Science.gov (United States)

    Youngquist, Robert C.; Ihlefeld, Curtis M.; Starr, Stanley O.

    2013-01-01

    A component level dc transformer is described in which no alternating currents or voltages are present. It operates by combining features of a homopolar motor and a homopolar generator, both de devices, such that the output voltage of a de power supply can be stepped up (or down) with a corresponding step down (or up) in current. The basic theory for this device is developed, performance predictions are made, and the results from a small prototype are presented. Based on demonstrated technology in the literature, this de transformer should be scalable to low megawatt levels, but it is more suited to high current than high voltage applications. Significant development would be required before it could achieve the kilovolt levels needed for de power transmission.

  3. Bahasa, Simbol, dan Religi

    OpenAIRE

    Supriyadi, Supriyadi

    1999-01-01

    Manusia sering disebut sebagai makhluk sosial, makhluk berakal, makhluk berseni, dan sebagainya. Tulisan ini secara tidak langsung membicarakan manusia sebagai makhluk berbahasa, bersimbol, dan bereligi . Meskipun demikian, titik tolaknya bukan pada manusia itu sendiri, tetapi pada bahasa, simbol, dan religinya, terutama pada hubungan di antara ketiganya . Hubungan antara bahasa dan simbol tidak diragukan lagi karena bahasa merupakan jenis simbol . Demikian juga hubungan antara simbol dengan ...

  4. The performance of the DC motor by the PID controlling PWM DC-DC boost converter

    OpenAIRE

    Can, Erol; Sayan, Hasan Hüseyin

    2017-01-01

    This paper presents the PID controlling direct current (DC) to the direct current boost converter feds DC motor which has a 3.68 kW and 240 V of DC voltage input on its characteristics. What is first formed is the boost converter mathematical model at the design stage. Secondly, a mathematical model of the DC motor is created so that the boost converter with the machine can be established and modeled at the Matlab Simulink. The PID controller is considered for arranging a pulse width modulati...

  5. Perawatan Satu\tKunjungan\tpada\tPremolar Pertama Atas Menggunakan Protaper Rotary dan Restorasi Resin Komposit

    Directory of Open Access Journals (Sweden)

    Sherli Diana

    2013-06-01

    Full Text Available Preparasi kemomekanik pada saluran akar meliputi instrumentasi mekanis dan irigasi antibakteri yang secara prinsip dapat langsung mengeliminasi mikroorganisme pada sistem saluran akar. sejak diperkenalkan pada tahun 1988, instrumen rotary nikel-titanium (niti telah digunakan secara umum dalam perawatan endodontik karena kemampuannya membentuk saluran akar dengan prosedur komplikasi yang minimal. Tujuan dari laporan kasus ini adalah untuk memaparkan perawatan saluran akar satu kunjungan menggunakan protaper rotary dan restorasi resin komposit gigi premolar. Penderita pria 21 tahun datang ke RSGM Prof. Soedomo UGM Yogyakarta mengeluhkan gigi belakang atas kiri yang berlubang tapi tidak sakit dan pasien ingin  dirawat.Gigi  Premolar satu atas  kiri terdapat kavitas disto oklusal dengan pulpa terbuka. Pemeriksan objektif pada gigi 24 sondasi, perkusi, palpasi, dan tes termal menunjukkan hasil negatif.Pemeriksaan radiografis tidak terdapat lesi, lamina dura tidak terputus dan saluran akar jelas dan lurus. Pada kasus ini dilakukan perawatan saluran akar dengan menggunakan ProTaper rotary ( X-Smart, Dentsply. Pasca perawatan saluran akar, gigi premolar satu atas kiri dilakukan tumpatan resin komposit kelas II.Hasil evaluasi klinik saat kontrol tidak ada keluhan rasa sakit, pemeriksaan objektif juga tidak ada rasa sakit, warna gigi serasi dengan warna gigi tetangga.prognosis pada kasus ini baik dan tidak ada keluhan. Kesimpulan paska perawatan saluran akar satu kunjungan dengan instrumenrotary, tidak terdapat keluhan.Penggunaan Instrumen rotary Nikel-Titanium (NiTi sangat flexible dengan prosedur komplikasi yang minimal, dan hemat waktu. One Visit Treatment of Upper Premolar Tooth Using Rotary Protaper and Composite Resin Restoration. Chemomechanical preparation for root canal including mechanic instrumentation and anti-bacterial irrigation principally could eliminate microorganisms in root canal system. Many instruments and techniques have been

  6. 75 FR 61989 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-8-31, DC-8-32, DC-8-33, DC-8-41...

    Science.gov (United States)

    2010-10-07

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 8-31, DC-8-32, DC-8-33, DC-8-41, DC-8-42, and... to all of the McDonnell Douglas Corporation airplanes identified above. The existing AD currently... the following new airworthiness directive (AD): 2010-21-03 McDonnell Douglas Corporation: Amendment 39...

  7. Triple voltage dc-to-dc converter and method

    Science.gov (United States)

    Su, Gui-Jia

    2008-08-05

    A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

  8. Bi-Directional DC-DC Converter for PHEV Applications

    Energy Technology Data Exchange (ETDEWEB)

    Abas Goodarzi

    2011-01-31

    Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

  9. RESONANT STEP-DOWN DC-DC POWER CONVERTERS

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a resonant step-down DC-DC power converter which comprises a primary side circuit and a secondary side circuit coupled through a galvanic isolation barrier. The primary side circuit comprises a positive and a negative input terminal for receipt of an input voltage...... charged from the input voltage and discharged to the output capacitor through the galvanic isolation barrier by a semiconductor switch arrangement in accordance with a switch control signal to produce the converter output voltage. The resonant step-down DC-DC power converter comprises an electrical short......-circuit connection across the galvanic isolation barrier connecting, in a first case, the second negative electrode of the output capacitor to the positive input terminal of the primary side circuit or, in a second case, connecting the second positive electrode of the output capacitor to the negative input terminal...

  10. Decentralized Interleaving of Paralleled Dc-Dc Buck Converters: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Brian B [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Rodriguez, Miguel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sinha, Mohit [University of Minnesota; Dhople, Sairaj [University of Minnesota; Poon, Jason [University of California at Berkeley

    2017-09-01

    We present a decentralized control strategy that yields switch interleaving among parallel connected dc-dc buck converters without communication. The proposed method is based on the digital implementation of the dynamics of a nonlinear oscillator circuit as the controller. Each controller is fully decentralized, i.e., it only requires the locally measured output current to synthesize the pulse width modulation (PWM) carrier waveform. By virtue of the intrinsic electrical coupling between converters, the nonlinear oscillator-based controllers converge to an interleaved state with uniform phase-spacing across PWM carriers. To the knowledge of the authors, this work represents the first fully decentralized strategy for switch interleaving of paralleled dc-dc buck converters.

  11. Active pre-filters for dc/dc Boost regulators

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Ramos-Paja

    2014-05-01

    Full Text Available This paper proposes an active pre-filter to mitigate the current harmonics generated by classical dc/dc Boost regulators, which generate current ripples proportional to the duty cycle. Therefore, high output voltage conditions, i.e., high voltage conversion ratios, produce high current harmonics that must be filtered to avoid damage or source losses. Traditionally, these current components are filtered using electrolytic capacitors, which introduce reliability problems because of their high failure rate. The solution introduced in this paper instead uses a dc/dc converter based on the parallel connection of the Boost canonical cells to filter the current ripples generated by the Boost regulator, improving the system reliability. This solution provides the additional benefits of improving the overall efficiency and the voltage conversion ratio. Finally, the solution is validated with simulations and experimental results.

  12. Linking DC together with TRSL

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Yong, X.

    2000-01-01

    in a method for real-time developments. An operational semantics with behavior is specified for TRSL. It is defined what its means for a TRSL process to satisfy a DC requirement, and a method for verifying whether the satisfaction relation holds or not is provided. Our contribution also demonstrates a general......Duration Calculus (DC) is an interval-based real-time logic, which can be used in capturing and eliciting users' real-time requirements. The Timed RAISE Specification Language (TRSL) is an extension of the RAISE Specification Language with real-time features. This paper links DC and TRSL together...

  13. DC Microgrids—Part II

    DEFF Research Database (Denmark)

    Dragicevic, Tomislav; Lu, Xiaonan; Quintero, Juan Carlos Vasquez

    2016-01-01

    distribution applications such as traction, telecom, vehicular and distributed power systems can be classified under DC MG framework and ongoing development and expansion of the field is largely influenced by concepts used over there. This paper aims firstly to shed light on the practical design aspects of DC...... MG technology concerning typical power hardware topologies and their suitability for different emerging smart grid applications. Then, an overview of the state of the art in DC MG protection and grounding is provided. Owing to the fact that there is no zero current crossing, an arc that appears upon...

  14. DC-Compensated Current Transformer.

    Science.gov (United States)

    Ripka, Pavel; Draxler, Karel; Styblíková, Renata

    2016-01-20

    Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component.

  15. DC injection into low voltage AC networks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This report summarises the results of a study investigating the impact of levels of injected DC current injections on a low voltage AC distribution network systems in order to recommend acceptable limits of DC from microgeneration. Relevant literature is reviewed, and the impact of DC levels in distribution transformers, transformer modelling, and instrumental transformers are discussed. The impact of DC in residual current devices (RCD) and in domestic electricity watt hour meters is examined along with DC enhanced corrosion, corrosion failure, and the measurement of DC current injection. Sources of DC injection outlined include DC from computer power supplies, network faults, geomagnetic phenomena, lighting circuits/dimmers, and embedded generators.

  16. Isolated step-down DC -DC converter for electric vehicles

    Science.gov (United States)

    Kukovinets, O. V.; Sidorov, K. M.; Yutt, V. E.

    2018-02-01

    Modern motor-vehicle industrial sector is moving rapidly now towards the electricity-driving cars production, improving their range and efficiency of components, and in particular the step-down DC/DC converter to supply the onboard circuit 12/24V of electric vehicle from the high-voltage battery. The purpose of this article - to identify the best circuitry topology to design an advanced step-down DC/DC converters with the smallest mass, volume, highest efficiency and power. And this will have a positive effect on driving distance of electric vehicle (EV). On the basis of computational research of existing and implemented circuit topologies of step-down DC/DC converters (serial resonant converter, full bridge with phase-shifting converter, LLC resonant converter) a comprehensive analysis was carried out on the following characteristics: specific volume, specific weight, power, efficiency. The data obtained was the basis for the best technical option - LLC resonant converter. The results can serve as a guide material in the process of components design of the traction equipment for electric vehicles, providing for the best technical solutions in the design and manufacturing of converting equipment, self-contained power supply systems and advanced driver assistance systems.

  17. Analisis Kebijakan dan Efektivitas Organisasi

    Directory of Open Access Journals (Sweden)

    Amir Syarifudin Kiwang

    2015-05-01

    Full Text Available Penerapan Peraturan Gubernur Nusa Tenggara Timur Nomor 8 Tahun 2011 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Pendidikan dan Pelatihan Koperasi dan Usaha Mikro Kecil dan Menengah pada Dinas Koperasi dan Usaha Mikro Kecil dan Menengah Provinsi Nusa Tenggara Timur adalah dalam rangka untuk meningkatkan efektivitas kerja organisasi pada UPT Diklat Koperasi dan UMKM. Penelitian ini berusaha untuk melihat dampak kebijakan organisasi terhadap efektivitas organisasi dengan menggunakan enam elemen variabel dari kebijakan dan praktik manajemen. Keenam elemen tersebut adalah penetapan tujuan strategis, pencarian dan pemanfaatan sumber daya, lingkungan prestasi, proses komunikasi, kepemimpinan dan pengambilan keputusan, serta adaptasi dan inovasi organisasi. Penelitian kualitatif ini menggunakan pendekatan studi kasus. Teknik analisis data yang digunakan adalah analisis data model Miles dan Huberman, yang terdiri atas reduksi data, display/penyajian data, dan kesimpulan/verifikasi. Hasil penelitian menunjukkan bahwa efektivitas organisasi pada UPT Diklat koperasi dan UMKM belum berjalan secara baik, hal ini dapat dilihat dari beberapa hal antara lain, belum adanya tenaga spesialisasi pengelola diklat dan tenaga khusus (sarjana di bidang perkoperasian dan kondisi lingkungan kerja (lingkungan prestasi pada UPT Diklat koperasi dan UMKM yang belum efektif. Penempatan pegawai juga belum tepat, mutasi ke UPT Diklat Koperasi dan UMKM tidak memperhatikan latar belakang pendidikan dan spesialisasi/keahlian pegawai sehingga membutuhkan waktu dalam proses penyesuaian serta menurunkan jumlah pelaksanaan diklat dikarenakan keterbatasan alokasi dana.

  18. Borehole DC-12 hydrostratigraphic chart

    International Nuclear Information System (INIS)

    Gephart, R.E.

    1981-09-01

    This hydrostratigraphic chart identifies the basic stratigraphy and preliminary hydrologic testing results for Borehole DC-12. This borehole was cored through the Saddle Mountains and Wanapum basalt formations and into the Grande Ronde. Selected zones were hydrologically tested during coring

  19. Borehole DC-14 hydrostratigraphic chart

    International Nuclear Information System (INIS)

    Gephart, R.E.

    1981-09-01

    This hydrostratigraphic chart identifies the basic stratigraphy and preliminary hydrologic testing results for Borehole DC-14. This borehole was cored through the Saddle Mountains and Wanapum basalt formations and into the Grande Ronde. Selected zones were hydrologically tested during coring

  20. Borehole DC-15 hydrostratigraphic chart

    International Nuclear Information System (INIS)

    Gephart, R.E.

    1981-09-01

    This hydrostratigraphic chart identifies the basic stratigraphy and preliminary hydrologic testing results for Borehole DC-15. This borehole was cored through the Saddle Mountains and Wanapum basalt formations and into the Grande Ronde. Selected zones were hydrologically tested during coring

  1. TANGKI SEPTIK DAN MASALAHNYA

    Directory of Open Access Journals (Sweden)

    Sri Soewasti Soesanto

    2012-10-01

    Full Text Available Manusia yang sehat tiap hari membuang tinja yang harus ditampung dan/atau diolah secara saniter. Meskipun Indonesia telah 55 tahun merdeka dan telah memiliki banyak ahli sanitasi/teknik penyehatan baik lulusan dalam maupun luar negeri, namun cara pengelolaan tinja yang ada kebanyakan masih belum memenuhi syarat kesehatan. Tangki septik dianggap sebagai cara penampungan tinja yang terbaik, padahal sebenarnya masih terjadi pencemaran tanah dan air melalui saluran perembesan.Tangki septik (septic tank merupakan salah satu macam sarana pengolahan tinja manusia yang pada garis besarnya terdiri dari sebuah tangki pembusukan lumpur (sludge digester dan saluran perembesan efluen. Tangki pembusukan harus memenuhi syarat mengenai perbandingan panjang dan lebar serta syarat kedalaman maksimum dan minimum, agar pembusukan lumpur dari tinja manusia dapat berjalan sempurna malahan tidak berbau busuk lagi.

  2. Five-Level Active-Neutral-Point-Clamped DC/DC Converter for Medium-Voltage DC Grids

    DEFF Research Database (Denmark)

    Liu, Dong; Deng, Fujin; Chen, Zhe

    2017-01-01

    This paper proposes a five-level active-neutralpoint- clamped (5L-ANPC) dc/dc converter for applications in medium voltage dc (MVDC) grids. A modulation strategy is proposed for the 5L-ANPC dc/dc converter to generate multilevel voltage waveforms, which can effectively reduce voltage change rate dv...... effectively eliminate high voltage leaps caused by the dead time effect. In addition, a capacitor voltage control strategy is proposed for the 5L-ANPC dc/dc converter to ensure the balanced flying capacitor voltage and desired five-level voltage waveforms. Finally, simulation and experimental studies...

  3. DEPRESI DAN GANGGUAN TIDUR

    Directory of Open Access Journals (Sweden)

    Wayan Eko Radityo

    2012-12-01

    Full Text Available Depresi merupakan gangguan mood berupa kesedihan yang intens, berlangsung dalamwaktu lama, dan mengganggu kehidupan normal yang insidennya semakin meningkatseiring dengan meningkatnya tekanan hidup. Tahun 2020, depresi diperkirakanmenempati urutan kedua penyakit di dunia. Gejala-gejala depresi terdiri dari gangguanemosi, gangguan kognitif, keluhan somatik, gangguan psikomotor, dan gangguanvegetatif. Salah satu gejala depresi yang muncul adalah gangguan tidur yang bisaberupa insomnia, bangun secara tiba-tiba, dan hipersomnia. Hal ini disebabkan olehgangguan neurotransmiter dan regulasi hormon. Selain sebagai gejala depresi, gangguantidur juga bisa merupakan penyebab depresi. Beberapa penelitian memberikanhubungan gangguan tidur dapat meningkatkan risiko depresi di kemudian hari.

  4. 75 FR 63040 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-30, DC...

    Science.gov (United States)

    2010-10-14

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10... following new airworthiness directive (AD): 2010-21-13 McDonnell Douglas Corporation: Amendment 39-16473... November 18, 2010. Affected ADs (b) None. Applicability (c) This AD applies to McDonnell Douglas...

  5. 75 FR 68246 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-11-05

    ...-1044; Directorate Identifier 2010-NM-033-AD] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas..., 2007) and adding the following new AD: McDonnell Douglas Corporation: Docket No. FAA-2010-1044.... Applicability (c) This AD applies to all McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

  6. Pulsewidth modulated DC-to-DC power conversion circuits, dynamics, and control designs

    CERN Document Server

    Choi, Byungcho

    2013-01-01

    This is the definitive reference for anyone involved in pulsewidth modulated DC-to-DC power conversion Pulsewidth Modulated DC-to-DC Power Conversion: Circuits, Dynamics, and Control Designs provides engineers, researchers, and students in the power electronics field with comprehensive and complete guidance to understanding pulsewidth modulated (PWM) DC-to-DC power converters. Presented in three parts, the book addresses the circuitry and operation of PWM DC-to-DC converters and their dynamic characteristics, along with in-depth discussions of control design of PWM DC-to

  7. Atmel Microcontroller Based Soft Switched PWM ZVS Full Bridge DC to DC Converter

    Directory of Open Access Journals (Sweden)

    DEEPAK KUMAR NAYAK

    2010-12-01

    Full Text Available This paper deals with the simulation and implementation of soft switched PWM ZVS full bridge DC to DC converter. The 48V DC is efficiently reduced to 12V DC using a DC to DC converter. This converter has advantages like reduced switching losses, stresses and EMI. Input DC is converted into high frequency AC and it is stepped down to 12V level. Later it is rectified using a full wave rectifier. Laboratory model of microcontroller based DC to DC converter is fabricated and tested. The experimental results are compared with the simulation results.

  8. 75 FR 60602 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-10-01

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10... adding the following new AD: 2010-20-14 McDonnell Douglas Corporation: Amendment 39-16449. Docket No. FAA... the airplanes identified in paragraphs (c)(1) and (c)(2) of this AD. (1) McDonnell Douglas Corporation...

  9. 75 FR 6160 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC...

    Science.gov (United States)

    2010-02-08

    ...-0032; Directorate Identifier 2009-NM-213-AD] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas...: McDonnell Douglas Corporation: Docket No. FAA-2010-0032; Directorate Identifier 2009-NM-213-AD. Comments Due... applies to McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A...

  10. 75 FR 38943 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-30, DC...

    Science.gov (United States)

    2010-07-07

    ...-0672; Directorate Identifier 2010-NM-047-AD] RIN 2120-AA64 Airworthiness Directives; McDonnell Douglas...: McDonnell Douglas Corporation: Docket No. FAA-2010-0672; Directorate Identifier 2010-NM-047-AD. Comments Due... applies to McDonnell Douglas Corporation Model DC- 10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10), DC-10...

  11. Light-weight DC to very high voltage DC converter

    Science.gov (United States)

    Druce, R.L.; Kirbie, H.C.; Newton, M.A.

    1998-06-30

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current. 1 fig.

  12. Light-weight DC to very high voltage DC converter

    Energy Technology Data Exchange (ETDEWEB)

    Druce, Robert L. (Union City, CA); Kirbie, Hugh C. (Dublin, CA); Newton, Mark A. (Livermore, CA)

    1998-01-01

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current.

  13. Radiated electromagnetic emissions of DC-DC converters

    International Nuclear Information System (INIS)

    Feld, L; Jussen, R; Karpinski, W; Klein, K; Sammet, J; Wlochal, M

    2010-01-01

    For the CMS tracker at SLHC a new powering scheme is considered to be mandatory to allow the detector to provide at least the same performance as today at the LHC. The baseline solution of CMS foresees the use of DC-DC converters to provide larger currents with smaller losses. An important component of most converters are inductors which, however, tend to radiate the switching noise generated by the converter. The emissions of different inductors have been measured and simulated, the coil design has been optimized and noise susceptibility measurements, with present CMS hardware, have been performed. This article summarizes the results.

  14. Pulse-width modulated DC-DC power converters

    CERN Document Server

    Kazimierczuk, Marian K

    2008-01-01

    This book studies switch-mode power supplies (SMPS) in great detail. This type of converter changes an unregulated DC voltage into a high-frequency pulse-width modulated (PWM) voltage controlled by varying the duty cycle, then changes the PWM AC voltage to a regulated DC voltage at a high efficiency by rectification and filtering. Used to supply electronic circuits, this converter saves energy and space in the overall system. With concept-orientated explanations, this book offers state-of-the-art SMPS technology and promotes an understanding of the principle operations of PWM converters,

  15. DESIGN OPTIMIZATION OF RESONANT DC-DC CONVERTERS

    OpenAIRE

    Belqasem Aljafari

    2016-01-01

    Resonant DC/DC converters are the class of converters, which have L-C resonant tank serving as a major part of the power conversion process. The fundamental concept of the resonant converter is that the circulating energy in an L-C resonant circuit is manageable by changing the operating frequency, and therefore the converter can condition the input power to the desired output voltage. The development in power conversion technology is steady demand for high power efficiency and high power den...

  16. DC grid for home applications

    Science.gov (United States)

    Elangovan, D.; Archana, R.; Jayadeep, V. J.; Nithin, M.; Arunkumar, G.

    2017-11-01

    More than fifty percent Indian population do not have access to electricity in daily lives. The distance between the power generating stations and the distribution centers forms one of the main reasons for lack of electrification in rural and remote areas. Here lies the importance of decentralization of power generation through renewable energy resources. In the present world, electricity is predominantly powered by alternating current, but most day to day devices like LED lamps, computers and electrical vehicles, all run on DC power. By directly supplying DC to these loads, the number of power conversion stages was reduced, and overall system efficiency increases. Replacing existing AC network with DC is a humongous task, but with power electronic techniques, this project intends to implement DC grid at a household level in remote and rural areas. Proposed work was designed and simulated successfully for various loads amounting to 250 W through appropriate power electronic convertors. Maximum utilization of the renewable sources for domestic and commercial application was achieved with the proposed DC topology.

  17. Linking DC together with TRSL

    DEFF Research Database (Denmark)

    Haxthausen, Anne; Yong, Xia

    1999-01-01

    In this talk we present a method for linking the Duration Calculus together with the Timed RAISE Specification Language. Duration Calculus (DC) [ZHR91] is an interval-based real time logic, which can be used naturally in capturing and eliciting users' real time requirements in the form of constra......In this talk we present a method for linking the Duration Calculus together with the Timed RAISE Specification Language. Duration Calculus (DC) [ZHR91] is an interval-based real time logic, which can be used naturally in capturing and eliciting users' real time requirements in the form.......TRSL is a real-time extension of the RAISE Specification Language (RSL) [Rlg92] which together with its associated method [Rmg95]and tools has shown to be very useful in the industrial development of software systems. Therefore, a promising approach for the development of real-time systemscould be to use DC...... for high-level specifications of real-time requirementsand TRSL for specifying real-time implementations in the form of timed communicating concurrent processes.In order to link DC and TRSL together in a well-founded way, we formally define what it means for a TRSL process to satisfy a DC requirement...

  18. Keragaman dan Peran Biologi Arthrophoda pada Sawah Irigasi dan Tegalan

    OpenAIRE

    Suwarno, Suwarno

    2016-01-01

    Penelitian ini bertujuan untuk mengetahui keragaman arthropoda dan peran biologinya pada tanah sawah irigasi dan tegalan. Penelitian ini dilaksanakan di daerah persawahan di daerah Sragen pada bulan Maret – Mei 2016. Metode Penelitian dengan menggunakan pitfall trap atau perangkap jebakan yang diletakkan area persawahan dan tegalan. Teknik pengumpulan data dengan menggunakan purposive sampling. Sampel arthropoda yang diperoleh diidentifikasi dan dianalisis di Laboratorium pendidikan Biologi. ...

  19. Modeling and analysis of fractional order DC-DC converter.

    Science.gov (United States)

    Radwan, Ahmed G; Emira, Ahmed A; AbdelAty, Amr M; Azar, Ahmad Taher

    2017-07-11

    Due to the non-idealities of commercial inductors, the demand for a better model that accurately describe their dynamic response is elevated. So, the fractional order models of Buck, Boost and Buck-Boost DC-DC converters are presented in this paper. The detailed analysis is made for the two most common modes of converter operation: Continuous Conduction Mode (CCM) and Discontinuous Conduction Mode (DCM). Closed form time domain expressions are derived for inductor currents, voltage gain, average current, conduction time and power efficiency where the effect of the fractional order inductor is found to be strongly present. For example, the peak inductor current at steady state increases with decreasing the inductor order. Advanced Design Systems (ADS) circuit simulations are used to verify the derived formulas, where the fractional order inductor is simulated using Valsa Constant Phase Element (CPE) approximation and Generalized Impedance Converter (GIC). Different simulation results are introduced with good matching to the theoretical formulas for the three DC-DC converter topologies under different fractional orders. A comprehensive comparison with the recently published literature is presented to show the advantages and disadvantages of each approach. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  20. An Integrated Multifunctional Bidirectional AC/DC and DC/DC Converter for Electric Vehicles Applications

    Directory of Open Access Journals (Sweden)

    Liwen Pan

    2016-06-01

    Full Text Available This paper presents an on-board vehicular battery charger that integrates bidirectional AC/DC converter and DC/DC converter to achieve high power density for application in electric vehicles (EVs. The integrated charger is able to transfer electrical energy between the battery pack and the electric traction system and to function as an AC/DC battery charger. The integrated charger topology is presented and the design of passive components is discussed. The control schemes are developed for motor drive system and battery-charging system with a power pulsation reduction circuit. Simulation results in MATLAB/Simulink and experiments on a 30-kW motor drive and 3.3-kW AC/DC charging prototype validate the performance of the proposed technology. In addition, power losses, efficiency comparison and thermal stress for the integrated charger are illustrated. The results of the analyses show the validity of the advanced integrated charger for electric vehicles.

  1. Evaluasi Sifat Morpologi dan Teknologi Pengolahan pada Gabah dan Beras

    OpenAIRE

    Santosa, Susilo

    2017-01-01

    Penelitian evaluasi dan beras terhadap mutu dan jumlah hasil ditekankan pada lr36 , lr38 dan Cisadane. Penelitian dilakukan di laboratorium Balai Penelitian Tanaman Pangan Karawang. Hasil studi menunjukkan diantara ketiga varitas, Cisadane mempunyai ukuran dimensi butiran yang lebih besar daripada Ir36 dan Ir38. Di antara ketiga varitas, persen kulit sekam yang tertinggi didapat 23,57 % pada lr38 diikuti 22,32% pada Ir36 dan 19,5% pada Cisadane. Persen beras pecah kulit tertinggi diperoleh pa...

  2. Evaluasi Sifat Morpologi Dan Teknologi Pengolahan Pada Gabah Dan Beras

    OpenAIRE

    Santosa, Susilo

    1982-01-01

    Penelitian evaluasi dan beras terhadap mutu dan jumlah hasil ditekankan pada lr36 , lr38 dan Cisadane. Penelitian dilakukan di laboratorium Balai Penelitian Tanaman Pangan Karawang. Hasil studi menunjukkan diantara ketiga varitas, Cisadane mempunyai ukuran dimensi butiran yang lebih besar daripada Ir36 dan Ir38. Di antara ketiga varitas, persen kulit sekam yang tertinggi didapat 23,57 % pada lr38 diikuti 22,32% pada Ir36 dan 19,5% pada Cisadane. Persen beras pecah kulit tertinggi diperoleh pa...

  3. Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants

    Science.gov (United States)

    Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

    2014-09-09

    A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

  4. Application of Distributed DC/DC Electronics in Photovoltaic Systems

    Science.gov (United States)

    Kabala, Michael

    In a typical residential, commercial or utility grade photovoltaic (PV) system, PV modules are connected in series and in parallel to form an array that is connected to a standard DC/AC inverter, which is then connected directly to the grid. This type of standard installation; however, does very little to maximize the energy output of the solar array if certain conditions exist. These conditions could include age, temperature, irradiance and other factors that can cause mismatch between PV modules in an array that severely cripple the output power of the system. Since PV modules are typically connected in series to form a string, the output of the entire string is limited by the efficiency of the weakest module. With PV module efficiencies already relatively low, it is critical to extract the maximum power out of each module in order to make solar energy an economically viable competitor to oil and gas. Module level DC/DC electronics with maximum power point (MPP) tracking solves this issue by decoupling each module from the string in order for the module to operate independently of the geometry and complexity of the surrounding system. This allows each PV module to work at its maximum power point by transferring the maximum power the module is able to deliver directly to the load by either boosting (stepping up) the voltage or bucking (stepping down) the voltage. The goal of this thesis is to discuss the development of a per-module DC/DC converter in order to maximize the energy output of a PV module and reduce the overall cost of the system by increasing the energy harvest.

  5. ¬MPPT Pada Sistem PV Menggunakan Algoritma Firefly dan Modified P&O dengan Konverter Hybrid Cuk terkoneksi ke Grid Satu Phasa di Bawah Kondisi Partial Shaded

    Directory of Open Access Journals (Sweden)

    Dhuhari Chalis Bani

    2017-01-01

    Full Text Available Abstrak— Photovoltaic (PV merupakan sumber energi terbarukan yang paling banyak dijumpai di alam serta merupakn energi alternatif yang sangat pesat perkembangannya. Untuk mengahasilkan daya, sebuah PV dipengaruhi sebuah nilai intensitas cahaya matahari yang mengenainya. Sebuah sistem PV membutuhkan sebuah kontrol yang bertujuan untuk meningkatkan efisien daya PV tersebut. Kontrol ini adalah Maximum Power Point Tracking (MPPT yang dapat mengoptimalkan daya yang dihasilkan oleh PV.  Sebuah PV hanya menghasilkan nilai tegangan yang rendah, untuk itu perlu menggunakan koverter DC-DC step up untuk menaikan rasio tegangan DC tadi. Untuk mengoptimalkan sistem ini, diperlukan sebuah konverter yang efisien dan dapat menghasilkan rasio konversi tegangan yang tinggi. Pada penelitian menggunakan firefly algoritm (FFA dan modified perturb and observe (P&O sebagai MPPT untuk mendapatkan nilai daya optimal pada keluaran PV.  Konverter DC-DC yang digunakan adalah hybrid cuk converter boost mode yang memiliki rasio tegangan yang tinggi. Dari DC-link kemudian masuk ke inverter (VSI yang diinterkoneksi dengan grid menggunakan current control. Hasil analisis simulasi menunjukan bahwa FFA dan P&O mampu menghasilkan daya PV yang optimum dengan riak yang kecil dan konverter hybrid cuk converter boost mode dapat menghasilkan rasio tegangan yang lebih besar dibandingkan konverter cuk biasa.   Kata Kunci — PV, MPPT FFA, MPPT P&O, Hybrid Cuk Converter, DC-Link, Inverter Grid Connected

  6. Voltage Weak DC Distribution Grids

    NARCIS (Netherlands)

    Hailu, T.G.; Mackay, L.J.; Ramirez Elizondo, L.M.; Ferreira, J.A.

    2017-01-01

    This paper describes the behavior of voltage weak DC distribution systems. These systems have relatively small system capacitance. The size of system capacitance, which stores energy, has a considerable effect on the value of fault currents, control complexity, and system reliability. A number of

  7. Compact integrated dc SQUID gradiometer

    Science.gov (United States)

    de Waal, V. J.; Klapwijk, T. M.

    1982-10-01

    An all-niobium integrated system of first-order gradiometer and dc suprconducting quantum interference device (SQUID) has been developed. It is relatively simple to fabricate, has an overall size of 17×12 mm and a sensitivity of 3.5×10-12 T m-1 Hz-1/2.

  8. Compact integrated dc SQUID gradiometer

    Energy Technology Data Exchange (ETDEWEB)

    de Waal, V.J.; Klapwijk, T.M.

    1982-10-01

    An all-niobium integrated system of first-order gradiometer and dc suprconducting quantum interference device (SQUID) has been developed. It is relatively simple to fabricate, has an overall size of 17 x 12 mm and a sensitivity of 3.5 x 10/sup -12/ T m/sup -1/ Hz/sup -1/2/.

  9. Experiments with a DC Motor

    Science.gov (United States)

    Kraftmakher, Yaakov

    2010-01-01

    Experiments with an electric motor provide good opportunity to demonstrate some basic laws of electricity and magnetism. The aim of the experiments with a low-power dc motor is to show how the motor approaches its steady rotation and how its torque, mechanical power and efficiency depend on the rotation velocity. The tight relationship between the…

  10. Borehole DC-6 hydrostratigraphic chart

    International Nuclear Information System (INIS)

    Gephart, R.E.

    1981-09-01

    This hydrostratigraphic chart for Borehole DC-6 identifies the basic stratigraphy and preliminary hydrologic test results. This borehole was cored for obtaining stratigraphic data and only that portion within the Grande Ronde formation remains open for hydrologic testing. The upper two formations were cased and cemented off

  11. DC motor operation controlled from a DC/DC power converter in pulse mode with low duty cycle

    OpenAIRE

    Stefanov, Goce; Kukuseva, Maja; Citkuseva Dimitrovska, Biljana

    2016-01-01

    In this paper pulse mode of operation of DC motor controlled by DC/DC power converter is analyzed. DC motor operation with time intervals in which the motor operates without output load is of interest. In this mode it is possible the motor to restore energy. Also, in the paper are represented calculations for the amount of the restored energy in the pulse mode operation of the motor for different duty cycles.

  12. DC to DC power converters and methods of controlling the same

    Science.gov (United States)

    Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

    2012-12-11

    A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

  13. Analysis of a high power, resonant DC-DC converter for DC wind turbines

    DEFF Research Database (Denmark)

    Dincan, Catalin Gabriel; Kjær, Philip Carne; Chen, Yu-Hsing

    2018-01-01

    This paper is introducing a new method of operation for a series resonant converter, with intended application in megawatt high-voltage DC wind turbines. Compared to a frequency controlled series resonant converter operated in sub resonant mode, the method (entitled pulse removal technique) allows...

  14. Dilation and Curettage (D&C)

    Science.gov (United States)

    ... For Patients About ACOG Dilation and Curettage (D&C) Home For Patients Search FAQs Dilation and Curettage ( ... February 2016 PDF Format Dilation and Curettage (D&C) Special Procedures What is dilation and curettage (D& ...

  15. Liever kraanwater dan bronwater

    NARCIS (Netherlands)

    Kole, A.P.W.

    2011-01-01

    Een test in het Restaurant van de Toekomst van de invloed van CO2-labels op het aankoopgedrag van consumenten, heeft nog geen duidelijk beeld opgeleverd. Wel pakten mensen vaker kraanwater dan bronwater.

  16. Dan Performer Mei Lanfang

    DEFF Research Database (Denmark)

    Risum, Janne

    2010-01-01

    The convention of performing female characters (dan characters) in Beijing opera, as practised by its most prominent male performer of female characters Mei Lanfang, and its and his cultural context and aesthetic aim...

  17. Hierarchical Power Sharing Control in DC Microgrids

    DEFF Research Database (Denmark)

    Peyghami, Saeed; Mokhtari, Hossein; Blaabjerg, Frede

    2016-01-01

    Because of the advances in power electronics, DC-based power systems, have been used in industrial applications such as data centers [18], space applications [10], aircraft [12], offshore wind farms, electric vehicles [56], DC home systems [5, 20], and high-voltage DC transmission systems...

  18. Characterising and modelling extended conducted electromagnetic interference in densely packed DC-DC converter

    CSIR Research Space (South Africa)

    Grobler, Inus

    2013-09-01

    Full Text Available . The military specified DC-DC converters are applicable, spanning from 100 W handheld power managers up to 2 kW DC-DC battery chargers. Circuit layout high frequency effects as well as high frequency impedances of the power components were characterised...

  19. Full wave dc-to-dc converter using energy storage transformers

    Science.gov (United States)

    Moore, E. T.; Wilson, T. G.

    1969-01-01

    Full wave dc-to-dc converter, for an ion thrustor, uses energy storage transformers to provide a method of dc-to-dc conversion and regulation. The converter has a high degree of physical simplicity, is lightweight and has high efficiency.

  20. A DC-DC Conversion Powering Scheme for the CMS Phase-1 Pixel Upgrade

    CERN Document Server

    Feld, Lutz Werner; Marcel Friedrichs; Richard Hensch; Karpinski, Waclaw; Klein, Katja; Sammet, Jan Domenik; Wlochal, Michael

    2012-01-01

    The powering scheme of the CMS pixel detector will be described, and the performance of prototype DC-DC buck converters will be presented, including power efficiency, system tests with DC-DC converters and pixel modules, thermal management, reliability at low temperature, and studies of potential frequency locking betwe...

  1. Transformerless dc-Isolated Converter

    Science.gov (United States)

    Rippel, Wally E.

    1987-01-01

    Efficient voltage converter employs capacitive instead of transformer coupling to provide dc isolation. Offers buck/boost operation, minimal filtering, and low parts count, with possible application in photovoltaic power inverters, power supplies and battery charges. In photovoltaic inverter circuit with transformerless converter, Q2, Q3, Q4, and Q5 form line-commutated inverter. Switching losses and stresses nil because switching performed when current is zero.

  2. AC-DC PFC Converter Using Combination of Flyback Converter and Full-bridge DC-DC Converter

    Directory of Open Access Journals (Sweden)

    Moh. Zaenal Efendi

    2014-06-01

    Full Text Available This paper presents a combination of power factor correction converter using Flyback converter and Full-bridge dc-dc converter in series connection. Flyback converter is operated in discontinuous conduction mode so that it can serve as a power factor correction converter and meanwhile Full-bridge dc-dc converter is used for dc regulator. This converter system is designed to produce a 86 Volt of output voltage and 2 A of output current. Both simulation and experiment results show that the power factor of this converter achieves up to 0.99 and meets harmonic standard of IEC61000-3-2. Keywords: Flyback Converter, Full-bridge DC-DC Converter, Power Factor Correction.

  3. A Feed-Forward Control Realizing Fast Response for Three-Branch Interleaved DC-DC Converter in DC Microgrid

    Directory of Open Access Journals (Sweden)

    Haojie Wang

    2016-07-01

    Full Text Available It is a common practice for storage batteries to be connected to DC microgrid buses through DC-DC converters for voltage support on islanded operation mode. A feed-forward control based dual-loop constant voltage PI control for three-branch interleaved DC-DC converters (TIDC is proposed for storage batteries in DC microgrids. The working principle of TIDC is analyzed, and the factors influencing the response rate based on the dual-loop constant voltage control for TIDC are discussed, and then the method of feed-forward control for TIDC is studied to improve the response rate for load changing. A prototype of the TIDC is developed and an experimental platform is built. The experiment results show that DC bus voltage sags or swells caused by load changing can be reduced and the time for voltage recovery can be decreased significantly with the proposed feed-forward control.

  4. A Feed-Forward Control Realizing Fast Response for Three-Branch Interleaved DC-DC Converter in DC Microgrid

    DEFF Research Database (Denmark)

    Wang, Haojie; Han, Minxiao; Yan, Wenli

    2016-01-01

    It is a common practice for storage batteries to be connected to DC microgrid buses through DC-DC converters for voltage support on islanded operation mode. A feed-forward control based dual-loop constant voltage PI control for three-branch interleaved DC-DC converters (TIDC) is proposed...... for storage batteries in DC microgrids. The working principle of TIDC is analyzed, and the factors influencing the response rate based on the dual-loop constant voltage control for TIDC are discussed, and then the method of feed-forward control for TIDC is studied to improve the response rate for load...... changing. A prototype of the TIDC is developed and an experimental platform is built. The experiment results show that DC bus voltage sags or swells caused by load changing can be reduced and the time for voltage recovery can be decreased significantly with the proposed feed-forward control....

  5. FLYWHEEL AND A DC MACHINE

    Directory of Open Access Journals (Sweden)

    IVAN ALCALÁ

    2014-01-01

    Full Text Available Este artículo describe el análisis, modelado y simulación de un vehículo eléctrico (EV enfocado al desarrollo de un banco de pruebas para reproducir la dinámica del EV. El banco está formado por un drive de motor de inducción (IM acoplado directamente a una máquina de DC y a un volante de inercia a través de una transmisión. El volante de inercia y la máquina de DC reproducen la dinámica y las fuerzas que actúan en el vehículo. Se propone una metodología para diseñar un banco de pruebas de EV para estudiar el comportamiento de vehículos eléctricos cercano a las condiciones de operación reales. El análisis de las fuerzas en el EV en conjunto con la máquina DC define las condiciones de operación del EV. El modelado y la simulación son desarrollados en MATLAB/Simulink, el banco de pruebas implementado es controlado por un DSP. Finalmente, los resultados de simulación y experimentales obtenidos validan el funcionamiento del banco de prueba.

  6. Quasi-Z-Source Half-Bridge DC-DC Converter for Photovoltaic Applications

    OpenAIRE

    Vinnikov, D; Chub, A; Husev, O; Zaķis, J

    2015-01-01

    This paper presents a novel quasi-Z-source halfbridge galvanically isolated DC-DC converter intended for the photovoltaic applications. The topology could be envisioned as an alternative to the boost half-bridge DC-DC converter but the benefit of its symmetric structure reduces the threat of transformer saturation due to the dc flux. The proposed converter features the continuous input current and could be used either with one or two input voltage sources.

  7. Control of the DC-DC Converter used into Energy Generation System

    International Nuclear Information System (INIS)

    Bizon, Nicu; Oproescu, Mihai

    2006-01-01

    This paper presents an investigation of the DC-DC Converter controller used into Energy Generation System. The full bridge is used into an Energy Generation System (EGS) as second power interface between the energy source and the high DC bus. The simulation results show that the DC-DC Converter behavior can be improved using a well designed PI control surface. The used Simulink models for the EGS blocks and some design considerations are presented, too. (authors)

  8. PREFERENSI PEMBIAYAAN USAHA MIKRO DAN KECIL : PERSPEKTIF GENDER DAN ENTREPRENEURABILITY

    Directory of Open Access Journals (Sweden)

    Khaira Amalia Fachrudin

    2013-06-01

    Full Text Available Preferensi pembiayaan dalam perusahaan besar lebih didasarkan pada karakteristik perusahaan tersebut.  Namun dalam usaha mikro dan kecil hal ini mungkin berbeda dan bergantung pada karakteristik pemiliknya seperti gender dan entrepreneurability.   Perbedaan gender mungkin juga membedakan entrepreneurability dan dukungan yang diterima.  Penelitian ini akan menguji apakah terdapat perbedaan preferensi pembiayaan berdasarkan gender, entrepreneurability berdasarkan gender dan berdasarkan preferensi pembiayaan, serta perbedaan dukungan berdasarkan gender.  Sampel dari usaha mikro dan kecil yang bergerak dalam bidang kuliner  diuji dengan uji beda Independent Sample t Test dan kemudian dengan Crosstabulation untuk lebih memperinci hasilnya.  Hasil uji menunjukkan bahwa tidak terdapat perbedaan yang signifikan preferensi pembiayaan berdasarkan gender dan berdasarkan  entrepreneurability, namun entrepreneurability berbeda signifikan berdasarkan gender dan juga ditemukan bahwa dukungan moral, tenaga, dan modal yang diterima pemilik usaha pria dan wanita tidak berbeda signifikan (p value lebih kecil dari 0.05.   Hasil ini menunjukkan bahwa terdapat kesetaraan gender dalam pembiayaan usaha dan entrepreneurability lebih tinggi pada pria.  Pria pemilik usaha juga mendapatkan dukungan tenaga kerja yang lebih banyak daripada wanita.  Dukungan tenaga ini adalah salah satu bentuk  financial bootstrapping karena dapat mengurangi pembiayaan usaha

  9. ZVS Operating Region of Multiresonant DC/DC Boost Conveter

    Directory of Open Access Journals (Sweden)

    Elzbieta Szychta

    2007-01-01

    Full Text Available Electromagnetic phenomena that occur during stable operation in resonant circuits of multiresonant ZVS boost converter are described, which can be applied in many fields of the needs of DC voltage electricity. The operating region of the converter is defined which assures the circuit’s operation in which semiconductor elements are switched at zero voltage (ZVS. Conditions delimiting the ZVS operating region are provided. Analysis of the circuit’s operation is based on results of simulation testing by means of Simplorer software.

  10. A Feedback Passivation Design for DC Microgrid and Its DC/DC Converters

    Directory of Open Access Journals (Sweden)

    Feifan Ji

    2016-12-01

    Full Text Available There are difficulties in analyzing the stability of microgrids since they are located on various network structures. However, considering that the network often consists of passive elements, the passivity theory is applied in this paper to solve the above-mentioned problem. It has been formerly shown that when the network is weakly strictly positive real (WSPR, the DC microgrid is stable if all interfaces between the microgrid and converters are made to be passive, which is called interface passivity. Then, the feedback passivation method is proposed for the controller design of various DC–DC converters to achieve the interface passivity. The interface passivity is different from the passivity of closed-loop systems on which the passivity based control (PBC concentrates. The feedback passivation design is detailed for typical buck converters and boost converters in terms of conditions that the controller parameters should satisfy. The theoretical results are verified by a hardware-in-loop real-time labotray (RTLab simulation of a DC microgrid with four generators.

  11. DETEKSI DAN MANAJEMEN REFEEDING SYNDROME

    OpenAIRE

    Darmadi Darmadi; Riska Habriel Ruslie

    2012-01-01

    AbstrakRefeeding syndrome (RFS) dideskripsikan sebagai perubahan biokimiawi, manifestasi klinis dan komplikasi sebagai konsekuensi pemberian nutrisi pada pasien kurang gizi. Refeeding syndrome ini menyebabkan dampak buruk dan kematian. Sindroma ini lebih sering terjadi pada kelompok risiko. Refeeding syndrome merupakan suatu sindroma yang sering tak terdiagnosis oleh karena itu perlu peningkatan pengetahuan dan kesadaran dari tenaga medis untuk mengurangi morbiditas dan mortalitas dari RFS. K...

  12. Pemodelan dan Analisa Reduksi Respon Getaran Translasi pada Sistem Utama dan Energi Listrik yang Dihasilkan oleh Mekanisme Dynamic Vibration Absorber Metode Cantilever Piezoelectric (CPVA

    Directory of Open Access Journals (Sweden)

    Wahyu Rachma Efendy

    2017-03-01

    Full Text Available Getaran banyak terjadi pada mesin-mesin di industri. Salah satu solusi untuk mereduksi getaran berlebih adalah dengan menambahkan Dynamic Vibration Absorber (DVA. Prinsip kerja dari Dynamic Vibration Absorber adalah penambahan massa absorber dan pegas pada sistem utama. DVA akan mereduksi getaran sistem utama dengan menghasilkan getaran yang arahnya berlawanan dengan arah getar dari sistem utama. Berdasarkan penelitian yang dilakukan oleh Pachpute [1], penggunaan DVA telah terbukti dapat mereduksi getaran dari sistem utama yang dioperasikan di frekuensi natural secara signifikan. Dalam penelitian Tugas Akhir ini telah dirancang sebuah mekanisme alat vibration absorber dan energy harvesting metode Cantilever Piezoelectric Vibration Absorber (CPVA. Sistem utama yang digunakan dalam penelitian ini adalah plat datar yang ditopang oleh empat pegas. Plat tersebut akan menerima gaya eksitasi dari pegas dibawahnya yang dihubungkan dengan massa eksentris pada motor DC. Koefisien pegas yang digunakan untuk menumpu plat datar memiliki nilai yang sama, yaitu sebesar 300 N/m. Sehingga eksitasi yang terjadi pada plat datar hanya ke arah translasi. Pada penelitian ini, dilakukan analisa dengan variasi amplitudo massa eksentris sebesar 0.025 m, 0.030 m, dan 0.035 m. Kecepatan putaran motor sebesar 20.61 rad/s (frekuensi natural, 22.05 rad/s (frekuensi panen, dan 25 rad/s (frekuensi lembah. Sedangkan variasi jumlah cantilever piezoelectric yang digunakan adalah 2600, 2800, dan 3000 buah. Dari simulasi yang telah dilakukan, daya bangkitan dan nilai persentase reduksi terbesar dari CPVA terjadi ketika sistem dioperasikan di frekuensi naturalnya, yaitu sebesar 3.52E-7 watt dan 20.36%. Selain itu, dari simulasi juga didapatkan karakteristik CPVA dengan memvariasikan jumlah piezoelectric, didapatkan rentang jumlah piezoelectric optimum adalah 1400 hingga 2400 buah. Pada rentang tersebut, daya bangkitan dan persentase reduksi perpindahan massa utama terbesar yang

  13. Artificial neural network control of sab dc/dc converter

    International Nuclear Information System (INIS)

    Mahar, M.A.; Abro, M.R.; Larik, A.S.

    2009-01-01

    The latest development of power semiconductor devices enable the modern power electronic converters to withstand high voltage and high power applications. Power electronic converters are mostly periodic variable structure systems due to their switched operations. The main drawback of these converters is the generation of oscillations which are developed during the operation of the converters under nonlinear situations. To handle these nonlinearities, various researchers have proposed different control techniques. Power electronic designers are devoting in the further development of converter topologies and their control techniques. SAB (Single Active Bridge) DC/DC converter is a new topology recently introduced by Demetriades. This topology is used in high voltage and high power applications. Because of its smart features, SAB converter has recently drawn attention of many researchers. However, during the operation of SAB converter severe oscillations are generated. In this research work, a novel NNC (Neural Network Controller) model is developed for SAB converter to minimize oscillations generated during its operation. NNC is believed to be an advanced nonlinear and robust controller which has the ability to map the nonlinear behaviour in a negligible response time. The performance of SAB converter with NNC is tested under dynamic region by considering the reference voltage variation and duty ratio variation. The SAB converter is implemented and simulated in MATLAB/Simulink. The simulated results are presented. (author)

  14. INOVASI DAN STRATEGI PENCAPAIANNYA

    Directory of Open Access Journals (Sweden)

    Liem Ferryanto

    2009-01-01

    Full Text Available Innovation is the way of life of any institution to profitably sustain its life. It starts with empathy, the ability to reach outside of ourselves and walk in someone else’s shoes, and optimal implementation of the newly advanced technology. Innovation shows its results through continuously hard working efforts known as "10 Thousand Hours Rule". As world uncertainty creates complexity we, instead of predicting, should therefore anticipate the future by creating and managing real options on contingent projects or elements of alternative optimal strategies. This should reflect into our portfolio strategy. Abstract in Bahasa Indonesia: Inovasi merupakan darah bagi suatu institusi untuk bisa hidup berkelanjutan serta menguntungkan. Inovasi berupa penemuan baru secara sistematis yang berawal dari empati, kemampuan untuk melihat dunia melalui mata orang lain, dan pemanfaatan secara optimal kemajuan teknologi yang ada. Inovasi baru menghasilkan buahnya melalui kerja keras, yaitu dengan mengikuti “Aturan 10 Ribu Jam” secara berkesinambungan. Ketidakpastian, interaksi, keterbatasan dan degradasi menciptakan kompleksitas tentang kebutuhan dan solusi di masa depan. Oleh sebab itu daripada meramalkan risiko yang bakal terjadi, kita sebaiknya memasang strategi berupa skenario untuk mereduksi akibat dari risiko masa depan yang tidak kita mengerti. Skenario ini dapat diperoleh lewat penciptaan dan penanganan beberapa pilihan nyata atas semua proyek antisipatif yang ada. Kata kunci: Inovasi, ketidakpastian dan kompleksitas, aturan 10 ribu jam, paradoks strategi, peta jalan, empati, kerja berkesinambungan.

  15. Experiments with a dc motor

    International Nuclear Information System (INIS)

    Kraftmakher, Yaakov

    2010-01-01

    Experiments with an electric motor provide good opportunity to demonstrate some basic laws of electricity and magnetism. The aim of the experiments with a low-power dc motor is to show how the motor approaches its steady rotation and how its torque, mechanical power and efficiency depend on the rotation velocity. The tight relationship between the mechanical and electrical parameters of the motor is clearly seen. The measurements are carried out with the ScienceWorkshop data-acquisition system and the DataStudio software from PASCO scientific. The experiments are well related to university courses of electricity and magnetism and can be used in undergraduate laboratories or for lecture demonstrations.

  16. PENGELOLAAN PENELITIAN DAN PENGEMBANGAN KESEHATAN DI THAILAND, MYANMAR, DAN INDIA

    Directory of Open Access Journals (Sweden)

    Anorital, SKM Anorital, SKM

    2012-09-01

    Full Text Available Dalam bulan Januari 1991 yang lalu, Sdr. Anorital, SKM (Ka. Subbag. Pengumpulan dan PengolahanData Badan Litbangkes dan H. Syafwani Mirin, SKM (Ka. Bag. Keuangan Badan Litbangkes memperoleh fellowship dari WHO untuk melakukan studi perbandingan ke institusi-institusi penelitian kesehatan di Thailand,Myanmar, dan India.Berikut di bawah ini tulisan bersangkutan yang menggambarkan secara garis besar pengelolaan penelitian dan pengembangan kesehatan pada masing-masing negara obyek studi. Semoga informasi yang terkandung pada tulisan ini dapat bermanfaat bagi pengembangan Badan Penelitian dan Pengembangan Kesehatan.

  17. Using PBL to Improve Educational Outcomes and Student Satisfaction in the Teaching of DC/DC and DC/AC Converters

    Science.gov (United States)

    Martinez-Rodrigo, Fernando; Herrero-De Lucas, Luis Carlos; de Pablo, Santiago; Rey-Boue, Alexis B.

    2017-01-01

    This paper examines the question of how to use project-based learning to increase student performance and satisfaction in a power electronics course addressing the topics of dc/dc and dc/ac converters, the assembly of a dc/dc converter, and the use of a commercial speed drive. A detailed presentation of the methodology is shown, and the results…

  18. Hierarchical Velocity Control Based on Differential Flatness for a DC/DC Buck Converter-DC Motor System

    Directory of Open Access Journals (Sweden)

    R. Silva-Ortigoza

    2014-01-01

    Full Text Available This paper presents a hierarchical controller that carries out the angular velocity trajectory tracking task for a DC motor driven by a DC/DC Buck converter. The high level control is related to the DC motor and the low level control is dedicated to the DC/DC Buck converter; both controls are designed via differential flatness. The high level control provides a desired voltage profile for the DC motor to achieve the tracking of a desired angular velocity trajectory. Then, a low level control is designed to ensure that the output voltage of the DC/DC Buck converter tracks the voltage profile imposed by the high level control. In order to experimentally verify the hierarchical controller performance, a DS1104 electronic board from dSPACE and Matlab-Simulink are used. The switched implementation of the hierarchical average controller is accomplished by means of pulse width modulation. Experimental results of the hierarchical controller for the velocity trajectory tracking task show good performance and robustness against the uncertainties associated with different system parameters.

  19. The Topologies Research of a Soft Switching Bidirectional DC/DC Converter

    DEFF Research Database (Denmark)

    Zhang, Qi; Zhang, Yongping; Sun, Xiangdong

    2017-01-01

    A soft-switching solution implemented to the traditional bidirectional DC/DC converter is developed. The soft-switching cell, which composed of three auxiliary switches, one resonant capacitor and one resonant inductor, is equipped in the traditional bidirectional DC/DC converter to realize circuit...... circle. And the proposed topology of bidirectional soft-switching dc-dc converter(TASBC) performs ideal soft switching at boost operations. The characteristics of the proposed converter has been verified by MATLAB simulations and experimental results....

  20. Elimination of output voltage oscillations in DC-DC converter using PWM with PI controller

    Directory of Open Access Journals (Sweden)

    Sreenivasappa Veeranna Bhupasandra

    2010-01-01

    Full Text Available In this paper the SIMULINK model of a PWM controlled DC-DC converter is modeled using switching function concept to control the speed of the DC motor. The presence of the voltage oscillation cycles due to higher switching frequency in the DC-DC converter is identified. The effect of these oscillations on the output voltage of the converter, Armature current, Developed torque and Speed of the DC motor is analyzed. In order to minimize the oscillation cycles the PI controller is proposed in the PWM controller.

  1. Chaos analysis and chaotic EMI suppression of DC-DC converters

    CERN Document Server

    Zhang, Bo

    2014-01-01

    Introduces chaos theory, its analytical methods and the means to apply chaos to the switching power supply design DC-DC converters are typical switching systems which have plenty of nonlinear behaviors, such as bifurcation and chaos. The nonlinear behaviors of DC-DC converters have been studied heavily over the past 20 years, yet researchers are still unsure of the practical application of bifurcations and chaos in switching converters. The electromagnetic interference (EMI), which resulted from the high rates of changes of voltage and current, has become a major design criterion in DC-DC co

  2. Kinerja Dan Efisiensi Bank Pemerintah (Bumn) Dan Busn Yang Go Publik Di Indonesia

    OpenAIRE

    Haryanto, Sugeng

    2012-01-01

    Penelitian ini menganalisis kinerja dan tingkat efisiensi bank-bank BUMN dan BUSN yang go Publik di Bursa Efek Indonesia. Sample penelitian ini mengambil tiga bank BUMN Bank BNI 46, Bank Mandiri dan Bank BRI) dan tiga bank BUSN (Bank BCA, Bank Niaga dan Bank Panin) dengan periode analisis tahun 2005-2011. Varibael yang digunakan meliputi ROA, ROE, LAR. LDR, NPL dan BOPO. Tujuan dari penelitian ini adalah melihat dan menganalisis perbedaan kinerja antara Bank BUMN dan BUSN yang go public di...

  3. Kondisi oral higiene dan karies gigi pada vegetarian dan non vegetarian di Maha Vihara Maitreya Medan

    OpenAIRE

    Prawira, Albert

    2011-01-01

    Perbedaan pola makan antara vegetarian dan non vegetarian dapat mempengaruhi kesehatan gigi dan mulut. Tujuan penelitian adalah untuk mengetahui kondisi oral higiene dan karies gigi pada umat vegetarian dan non vegetarian di Maha Vihara Maitreya Medan. Jenis penelitian adalah survei deskriptif. Sampel terdiri atas 74 vegetarian dan 65 non vegetarian. Pemeriksaan oral higiene dan karies gigi masing-masing menggunakan indeks OHIS Greene dan Vermillion dan indeks DMFT Klein, se...

  4. Simultaneous distribution of AC and DC power

    Science.gov (United States)

    Polese, Luigi Gentile

    2015-09-15

    A system and method for the transport and distribution of both AC (alternating current) power and DC (direct current) power over wiring infrastructure normally used for distributing AC power only, for example, residential and/or commercial buildings' electrical wires is disclosed and taught. The system and method permits the combining of AC and DC power sources and the simultaneous distribution of the resulting power over the same wiring. At the utilization site a complementary device permits the separation of the DC power from the AC power and their reconstruction, for use in conventional AC-only and DC-only devices.

  5. Drilling history core hole DC-8

    International Nuclear Information System (INIS)

    1978-10-01

    Core hole DC-8 was completed in August, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-8. Core hole DC-8 is located on the Hanford Site near the Wye Barricade and 50 feet northwest of rotary hole DC-7. The Hanford Site vation coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 mean sea level. The purpose of core hole DC-8 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing and cross-hole seismic shear and pressure wave velocity studies with rotary hole DC-7. The total depth of core hole DC-8 was 4100.5 feet. Core recovery exceeded 97 percent of the total footage cored

  6. Drilling history core hole DC-8

    Energy Technology Data Exchange (ETDEWEB)

    1978-10-01

    Core hole DC-8 was completed in August, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Scisson, Inc. furnished the engineering, daily supervision of the core drilling activities, and geologic core logging for hole DC-8. Core hole DC-8 is located on the Hanford Site near the Wye Barricade and 50 feet northwest of rotary hole DC-7. The Hanford Site vation coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 coordinates for DC-8 are North 14,955.94 feet and West 14,861.92 mean sea level. The purpose of core hole DC-8 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing and cross-hole seismic shear and pressure wave velocity studies with rotary hole DC-7. The total depth of core hole DC-8 was 4100.5 feet. Core recovery exceeded 97 percent of the total footage cored.

  7. Wide Temperature Range DC-DC Boost Converters for Command/Control/Drive Electronics, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We shall develop wide temperature range DC-DC boost converters that can be fabricated using commercial CMOS foundries. The boost converters will increase the low...

  8. Modular Power System Configured with Standard Product Hybrid DC-DC Converters, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — VPT proposes an innovative concept whereby complex NASA space power electronic systems can be configured using a small number of qualified hybrid DC-DC converter and...

  9. Development of a DC-DC conversion powering scheme for the CMS Phase-1 pixel upgrade

    CERN Document Server

    Feld, Lutz Werner; Karpinski, Waclaw; Klein, Katja; Lipinski, Martin; Preuten, Marius; Max Rauch; Rittich, David Michael; Sammet, Jan Domenik; Wlochal, Michael

    2014-01-01

    A novel powering scheme based on the DC-DC conversion technique will be exploited to power the CMS Phase-1 pixel detector. DC-DC buck converters for the CMS pixel project have been developed, based on the AMIS5 ASIC designed by CERN. The powering system of the Phase-1 pixel detector is described and the performance of the converter prototypes is detailed, including power efficiency, stability of the output voltage, shielding, and thermal management. Results from a test of the magnetic field tolerance of the DC-DC converters are reported. System tests with pixel modules using many components of the future pixel barrel system are summarized. Finally first impressions from a pre-series of 200 DC-DC converters are presented.

  10. DIAGNOSTIC/PROGNOSTIC EXPERIMENTS FOR CAPACITOR DEGRADATION AND HEALTH MONITORING IN DC-DC CONVERTERS

    Data.gov (United States)

    National Aeronautics and Space Administration — Studying and analyzing the ageing mechanisms of electronic components avionics in systems such as the GPS and INAV are of critical importance. In DC-DC power...

  11. Digitally intensive DC-DC converter for extreme space environments, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Micro –Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

  12. Digitally intensive DC-DC converter for extreme space environments, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Micro-Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

  13. 75 FR 61352 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-30, DC-10-30F, DC-10-30F (KC...

    Science.gov (United States)

    2010-10-05

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 10-30, DC-10-30F, DC-10-30F (KC-10A and KDC-10...-13 McDonnell Douglas Corporation: Amendment 39-16448; Docket No. FAA-2010-0553; Directorate.... Applicability (c) This AD applies to McDonnell Douglas Corporation Model DC- 10-30, DC-10-30F, DC-10-30F (KC-10A...

  14. 75 FR 27401 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-30, DC-9-40, and DC-9-50...

    Science.gov (United States)

    2010-05-17

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-30, DC-9-40, and DC-9-50 Series Airplanes... airworthiness directive (AD) for certain Model DC-9-30, DC-9-40, and DC-9-50 series airplanes. This AD requires... this AD to detect and correct the potential for an arc/spark condition to occur within the fuel boost...

  15. Novel composite resonance DC-DC converter with voltage doubler rectifier

    OpenAIRE

    Kato, Hisatsugu; Matsuo, Hirohumi; Eguchi, Masaki; Sakamoto, Yukitaka; Nakaishi, Masaki

    2009-01-01

    This paper deals with a novel composite resonance DC-DC converter with the voltage doubler rectifier, which is developed to be applied to the power conditioner of the photovoltaic generation system. The proposed DC-DC converter has the current and voltage resonance functions. Therefore, the output voltage regulation can be achieved for the large variations of the input voltage and load. Also, this converter has the high power efficiency. The maximum power efficiency 96.1% can be realized.

  16. Regulation of DC development and DC-mediated T-cell immunity via CISH

    OpenAIRE

    Miah, Mohammad Alam; Bae, Yong-Soo

    2013-01-01

    Cytokine inducible SH2-containing protein (CISH) plays a crucial role in type 1 dendritic cell (DC) development as well as in the DC-mediated activation of cytotoxic T lymphocytes (CTLs). CISH expression at late DC developmental stages shuts down the proliferation of DC progenitors by negatively regulating signal transducer and activator of transcription 5 (STAT5) and facilitates the differentiation of DCs into potent stimulators of CTLs.

  17. Regulation of DC development and DC-mediated T-cell immunity via CISH.

    Science.gov (United States)

    Miah, Mohammad Alam; Bae, Yong-Soo

    2013-03-01

    Cytokine inducible SH2-containing protein (CISH) plays a crucial role in type 1 dendritic cell (DC) development as well as in the DC-mediated activation of cytotoxic T lymphocytes (CTLs). CISH expression at late DC developmental stages shuts down the proliferation of DC progenitors by negatively regulating signal transducer and activator of transcription 5 (STAT5) and facilitates the differentiation of DCs into potent stimulators of CTLs.

  18. Design and Analysis of Two-Phase Boost DC-DC Converter

    OpenAIRE

    Taufik Taufik; Tadeus Gunawan; Dale Dolan; Makbul Anwari

    2010-01-01

    Multiphasing of dc-dc converters has been known to give technical and economical benefits to low voltage high power buck regulator modules. A major advantage of multiphasing dc-dc converters is the improvement of input and output performances in the buck converter. From this aspect, a potential use would be in renewable energy where power quality plays an important factor. This paper presents the design of a 2-phase 200W boost converter for battery charging application. Analysis of results fr...

  19. A Fixed-Frequency Bidirectional Resonant DC-DC Converter Suitable for Wide Voltage Gain Range

    DEFF Research Database (Denmark)

    Shen, Yanfeng; Wang, Huai; Blaabjerg, Frede

    2017-01-01

    This paper proposes a new bidirectional resonant dc-dc converter suitable for wide voltage gain range applications (e.g., energy storage systems). The proposed converter overcomes the narrow voltage gain range of conventional resonant DC-DC converters, and meanwhile achieves high efficiency...... and characteristics of the proposed converter are analyzed. Finally, a 1-kW converter prototype is built and the experimental results verify the theoretical analyses....

  20. Development of a green mode DC/DC converter available to portable nuclear instrument

    International Nuclear Information System (INIS)

    Gao Feiyan; Wu Longxiong; Tan Wei; Tang Yaogeng

    2010-01-01

    A green mode DC/DC converter was developed which suitable to the portable nuclear instrument which is powered by battery and is sometime at stand-by mode. Some updated control approaches such as pseudo-resonant type power supply control and synchronous rectification were adopted to makethe DC/DC converter operate with low power consumption and high efficiency. The test results the battery can be prolonged with this converter. (authors)

  1. IDE DAN DESAIN

    Directory of Open Access Journals (Sweden)

    Priscilia Yunita Wijaya

    1999-01-01

    Full Text Available We have seen many desain all around our everyday living. Design exist in the form of brochures%2C posters%2C banners%2C signages%2C book covers%2C and etcetera. Some are nice and easy to understand%2C some are ok%2C and some look like they are not fully develop and thought. A word that run across our mind whrn we enjoying a design is idea . A good design almost always associated with a good idea%2C is it tru? This paper is going to discuss about desain and its relationship to idea. Abstract in Bahasa Indonesia : Banyak desain yang diamati dalam kehidupan kita sehari-hari. Desain hadir dalam bentuk brosur%2C poster%2C spanduk%2C tanda-tanda%2C sampul buku%2C dan lain sebagainya. Ada beberapa yang bagus dan mudah untuk dimengerti%2C beberapa yang biasa%2C dan beberapa yang tampak asal dibuat. Sebuah kata yang terlintas dalam pemikiran kita dalam menikmati sebuah desain adalah ide . Sebuah desain yang baik selalu di identikan dengan ide yang baik%2C benarkah hal ini? Apakah desain dan apa hubungannya dengan ide akan dibahas pada tulisan ini.

  2. Superconducting dc fault current limiter

    International Nuclear Information System (INIS)

    Cointe, Y.

    2007-12-01

    Within the framework of the electric power market liberalization, DC networks have many interests compared to alternative ones, but their protections need to use new systems. Superconducting fault current limiters enable by an overstepping of the critical current to limit the fault current to a preset value, lower than the theoretical short-circuit current. For these applications, coated conductors offer excellent opportunities. We worked on the implementation of these materials and built a test bench. We carried out limiting experiments to estimate the quench homogeneity at various short-circuit parameters. An important point is the temperature measurement by deposited sensors on the ribbon, results are in good correlation with the theoretical models. Improved quench behaviours for temperatures close to the critical temperature have been confirmed. Our results enable to better understand the limitation mechanisms of coated conductors. (author)

  3. The possibility of detecting DC

    International Nuclear Information System (INIS)

    Witte, N.S.; Brown, R.D.

    1977-01-01

    IRC + 10216, a bright infrared late type carbon star, is observed to have millimetre range line emission of the species 12 CO, 13 CO, CS, C 2 H, HC 3 N, CN, HCN, SiS and SiO in an extended envelope around the central infrared sources. A model explaining the line emission in terms of infrared pumping between the two lowest vibrational levels, first proposed for IRC + 10216, was used to calculate antenna temperatures for various rotational transitions of HC 3 N; since there is a prima facie agreement between the calculated and observed values for HC 3 N we have attempted the same calculation for DC 3 N. (J.R.)

  4. Superconducting energy stabilizer with charging and discharging DC-DC converters

    International Nuclear Information System (INIS)

    Kim, S.H.; Kostecki, E.L.; DeWinkel, C.C.

    1992-01-01

    This patent describes a superconducting energy stabilizer having multiple load connections and employing DC-DC conversion for storing energy in a superconducting inductive energy storage device having a first end and a second end, and for releasing the stored energy from the superconducting inductive energy storage device to a load or loads or to a utility or an industrial electrical distribution system, the superconducting energy stabilizer having multiple load connections and employing DC-DC conversion. It comprises: energy storage cell means for supplying energy to the load, discharging DC-DC converter means for releasing energy from the superconducting inductive energy storage device to the energy storage cell means, the discharging DC-DC converter means having input terminals, output terminals, and a discharging control line means for carrying signals controlling the operation of the discharging DC-DC converter means, one of the input terminals of the discharging DC-DC converter means coupled to the first end of the superconducting energy storage device

  5. Dual wound dc brush motor gearhead

    Science.gov (United States)

    Henson, Barrie W.

    1986-01-01

    The design requirements, the design, development tests and problems, the qualification and life test and the findings of the strip examination of a dual wound DC brushed motor gearhead are described. It is the only space qualified dual wound dc brushed motor gearhead in Europe.

  6. Electronic DC transformer with high power density

    NARCIS (Netherlands)

    Pavlovský, M.

    2006-01-01

    This thesis is concerned with the possibilities of increasing the power density of high-power dc-dc converters with galvanic isolation. Three cornerstones for reaching high power densities are identified as: size reduction of passive components, reduction of losses particularly in active components

  7. DC/DC converters for integration of double-layer condensers in onboard power supply; DC/DC-Wandler zur Einbindung von Doppelschichtkondensatoren in das Fahrzeugenergiebordnetz

    Energy Technology Data Exchange (ETDEWEB)

    Polenov, Dieter

    2010-01-15

    The paper discusses DC/DC converters for integration of double layer condensers into the onboard power system. First, requirements on DC/DC converters are listed and compared on the basis of three exemplary applications. A DC/DC converter concept is developed for decoupling transient high-power loads like electric steering systems. Three different topologies are compared using a specially developed method in order to find the best solution for the given application. In order to establish adequate criteria for selecting the switching frequency and inductivities of storage throttles, the influence of the trottle power change on the switching characteristics of the MOSFETs and on certain ranges of EMP interference emissions is investigated. As methods of optimising the operation of the synchronous rectifiers, parallel connection of Schottky diodes and synchronous rectifiers as well as the variation of the shut-off dead times of synchronous rectifiers were investigated. Further, a concept for converter control was developed in consideration of the intended application and topology. Finally, selected aspects for implementation of the DC/DC converter concept are presented as well as the results of experimental investigations.

  8. Modelling of flow phenomena during DC casting

    NARCIS (Netherlands)

    Zuidema, J.

    2005-01-01

    Modelling of Flow Phenomena during DC Casting Jan Zuidema The production of aluminium ingots, by semi-continuous casting, is a complex process. DC Casting stands for direct chill casting. During this process liquid aluminium transforms to solid aluminium while cooling down. This is not an

  9. DC KIDS COUNT e-Databook Indicators

    Science.gov (United States)

    DC Action for Children, 2012

    2012-01-01

    This report presents indicators that are included in DC Action for Children's 2012 KIDS COUNT e-databook, their definitions and sources and the rationale for their selection. The indicators for DC KIDS COUNT represent a mix of traditional KIDS COUNT indicators of child well-being, such as the number of children living in poverty, and indicators of…

  10. URGENSI DAN PROSPEK PENGATURAN (IUS CONSTITUENDUM UU TENTANG CONTEMPT OF COURT UNTUK MENEGAKKAN MARTABAT DAN WIBAWA PERADILAN

    Directory of Open Access Journals (Sweden)

    Lilik Mulyadi

    2015-07-01

    Full Text Available UU Contempt of Court merupakan kebutuhan yang bersifat urgent, segera dan mendesak, sehingga perlu dilakukan kajian dan penelitian secara kritis, akademis dan bersifat komprehensif untuk menjaga keluhuran dan menegakkan martabat dan wibawa peradilan.

  11. A Component-Reduced Zero-Voltage Switching Three-Level DC-DC Converter

    DEFF Research Database (Denmark)

    Qin, Zian; Pang, Ying; Wang, Huai

    2016-01-01

    The basic Zero-Voltage Switching (ZVS) three-level DC-DC converter has one clamping capacitor to realize the ZVS of the switches, and two clamping diodes to clamp the voltage of the clamping capacitor. In order to reduce the reverse recovery loss of the diode as well as its cost, this paper...... proposes to remove one of the clamping diodes in basic ZVS three-level DC-DC converter. With less components, the proposed converter can still have a stable clamping capacitor voltage, which is clamped at half of the dc link voltage. Moreover, the ZVS performance will be influenced by removing the clamping...

  12. Improved Control Strategy for T-type Isolated DC/DC Converters

    DEFF Research Database (Denmark)

    Liu, Dong; Deng, Fujin; Wang, Yanbo

    2017-01-01

    T-type isolated DC/DC converters have recently attracted attention due to their numerous advantages, including few components, low cost, and symmetrical operation of transformers. This study proposes an improved control strategy for increasing the efficiency of T-type isolated DC/DC converters....... Under the proposed strategy, the primary circulating current flows through the auxiliary switches (metal–oxide–semiconductor field-effect transistors) instead of their body diodes in free-wheeling periods. Such feature can reduce conduction losses, thereby improving the efficiency of T-type isolated DC...

  13. DC Voltage Droop Control Implementation in the AC/DC Power Flow Algorithm: Combinational Approach

    DEFF Research Database (Denmark)

    Akhter, F.; Macpherson, D.E.; Harrison, G.P.

    2015-01-01

    of operational flexibility, as more than one VSC station controls the DC link voltage of the MTDC system. This model enables the study of the effects of DC droop control on the power flows of the combined AC/DC system for steady state studies after VSC station outages or transient conditions without needing...... to use its complete dynamic model. Further, the proposed approach can be extended to include multiple AC and DC grids for combined AC/DC power flow analysis. The algorithm is implemented by modifying the MATPOWER based MATACDC program and the results shows that the algorithm works efficiently....

  14. Design of PI Controlled Non Isolated Bidirectional DC to DC Converter for Electric Vehicle Application

    Science.gov (United States)

    Geetha, A.; Subramani, C.; Thamizh Thentral, T. M.; Krithika, V.; Usha, S.

    2018-04-01

    Non isolated Bidirectional DC-DC Converter (NIBDDC) is a good interface between DC source and inverter Fed induction motor drive. This paper deals with comparison between open loop and PI controlled Bidirectional DC to DC Converter Inverter System (BDDCIS). The modelling and control of BDDC is becomes an important issue. Open loop BDDCIS and closed loop PI controlled BDDCIS are designed, modelled and simulated using Matlab- simulink and their results are presented. The investigations indicate superior performance of PI controlled BDDCIS. The proposed BDDCIS has advantages like bidirectional power transfer ability, reduced hardware count and improved dynamic response.

  15. Drilling history core hole DC-4

    International Nuclear Information System (INIS)

    1978-12-01

    Core hole DC-4 was completed at a depth of 3998 feet in December, 1978 by Boyles Brothers Drilling Company, Spokane, Washington, under subcontract to Fenix and Scission, Inc. The hole was cored for the US Department of Energy and the Rockwell Hanford Operations' Basalt Waste Isolation Program. Fenix and Sicsson, Inc. furnished the engineering, daily supervision of the cable tool and core drilling activities, and geological core logging for DC-4. Core hole DC-4 is located on the Hanford Site about 3 miles east of the Yakima Barricade and approximately 103 feet southwest of rotary hole DC-5, which was completed to 3990 feet in February, 1978. Hanford Site coordinates reported for hole DC-4 are north 49,385.62 feet and west 85,207.63 feet, and Washington State coordinates are north 454,468.73 feet and east 2,209,990.87 feet. No elevation survey is available for hole DC-4, but it is approximately 745 feet above mean sea level based upon the survey of hole DC-5, which has a reported elevation of 745.16 feet on the top of the 3-inch flange. The purpose of core hole DC-4 was to core drill vertically through the basalt and interbed units for stratigraphic depth determination and core collection, and to provide a borehole for hydrologic testing, cross-hole seismic shear, and pressure wave velocity studies with rotary hole DC-5. Hole DC-4 was drilled through the overburden into basalt bedrock by cable tool methods (0-623 feet) and continuously cored through the final interval (623 to 3998 feet).Core recovery was 95.8 percent of the total footage cored

  16. Epistemologi dan Keterbatasan Teori Gravitasi

    Directory of Open Access Journals (Sweden)

    Erwin Erwin

    2017-08-01

    Full Text Available Peristiwa tentang kecenderungan jatuhnya benda-benda menuju pusat bumi dan keteraturan peredaran planet dan benda-benda langit lainnya dalam tata surya dahulu dianggap dua fenomena yang berbeda. Mekanika benda langit dan mekanika bumi yang sebelumnya merupakan dua pengetahuan yang terpisah, dianggap satu kesatuan oleh Sir Isaac Newton. Newton mengemukakan hukum gravitasi umum yaitu gaya tarik menarik antara dua benda besarnya sebanding dengan massa masing-masing benda dan berbanding terbalik dengan kuadrat jarak antara kedua benda. Hukum gravitasi ini sukses menjalaskan bagaimana benda cendrung jatuh menuju pusat bumi dan peredaran planet dan benda-benda langit lain mengelilingi matahari dalam sistem tata surya. Namun hukum gravitasi Newton ternyata tidak sepenuhnya tepat, beberapa hal dapat dijelaskan dengan hukum relativitas Einstein, namun demikian hukum relativitas Einstein juga dicurigai masih perlu diamandemen agar dapat menjelaskan fenomena alam dengan tepat.

  17. EPISTEMOLOGI DAN KETERBATASAN TEORI GRAVITASI

    Directory of Open Access Journals (Sweden)

    Erwin Erwin

    2017-08-01

    Full Text Available Peristiwa tentang kecenderungan jatuhnya benda-benda menuju pusat bumi dan keteraturan peredaran planet dan benda-benda langit lainnya dalam tata surya dahulu dianggap dua fenomena yang berbeda. Mekanika benda langit dan mekanika bumi yang sebelumnya merupakan dua pengetahuan yang terpisah, dianggap satu kesatuan oleh Sir Isaac Newton. Newton mengemukakan hukum gravitasi umum yaitu gaya tarik menarik antara dua benda besarnya sebanding dengan massa masing-masing benda dan berbanding terbalik dengan kuadrat jarak antara kedua benda. Hukum gravitasi ini sukses menjalaskan bagaimana benda cendrung jatuh menuju pusat bumi dan peredaran planet dan benda-benda langit lain mengelilingi matahari dalam sistem tata surya. Namun hukum gravitasi Newton ternyata tidak sepenuhnya tepat, beberapa hal dapat dijelaskan dengan hukum relativitas Einstein, namun demikian hukum relativitas Einstein juga dicurigai masih perlu diamandemen agar dapat menjelaskan fenomena alam dengan tepat.

  18. ISLAM DAN RADIKALISME: Upaya Antisipasi dan Penanggulangannya

    Directory of Open Access Journals (Sweden)

    Idrus Ruslan

    2017-02-01

    Full Text Available Sejak tragedi pemboman WTC tanggal 11 September 2001 yang disusul dengan rangkaian peledakan bom di sejumlah negara, banyak orang non Muslim yang berasumsi bahwa ajaran Islam identik dengan radikalisme. Walaupun assumsi yang berkembang itu dapat dimaklumi, namun keyakinan tersebut tentu saja tidak sepenuhnya benar. Karena meskipun terdapat sekelompok orang Islam yang berbuat radikal, akan tetapi mayoritas Muslim justru bertentangan dengan mereka. Lagi pula, jika dicermati secara mendalam, sesungguhnya Islam sama sekali tidak mentolerir tindakan radikal. Ia adalah agama kasih sayang yang sangat mendodrong penganutnya untuk berbuat baik terhadap orang lain, termasuk kepada orang-orang non-Muslim. Artikel ini menawarkan beberapa upaya strategis dalam mengantisipasi dan menanggulangi bahaya radikalisme-terorisme.

  19. Controlling DC-DC converters by chaos-based pulse width modulation to reduce EMI

    International Nuclear Information System (INIS)

    Li Hong; Zhang Bo; Li Zhong; Halang, Wolfgang A.; Chen Guanrong

    2009-01-01

    In this paper, periodic and chaotic behaviors of DC-DC converters under certain parametric conditions are simulated, experimentally verified, and analyzed. Motivated by the work of J.H.B. Deane and D.C. Hamill in 1996, where chaotic phenomena are useful in suppressing electromagnetic interference (EMI) by adjusting the parameters of the DC-DC converter and making it operate in chaos, a chaos-based pulse width modulation (CPWM) is proposed to distribute the harmonics of the DC-DC converters continuously and evenly over a wide frequency range, thereby reducing the EMI. The output waves and spectral properties of the EMI are simulated and analyzed as the carrier frequency or amplitude changes with regard to different chaotic maps. Simulation and experimental results are given to illustrate the effectiveness of the proposed CPWM, which provides a good example of applying chaos theory in engineering practice.

  20. A Dual-Buck–Boost AC/DC Converter for DC Nanogrid With Three Terminal Outputs

    DEFF Research Database (Denmark)

    Wu, Weimin; Wang, Houqing; Liu, Yuan

    2017-01-01

    Due to the widely used dc characterized loads and more distributed power generation sources, the dc nanogrid becomes more and more popular, and it is seen as an alternative to the ac grid. For safety considerations, the dc nanogrid should provide reliable grounding for the residential loads...... such as the low-voltage ac power system. There are three typical grounding configurations for a dc nanogrid: the united grounding, the unidirectional grounding, and the virtual isolated grounding. Each grounding configuration has its own specifications to ac/dc converters. In this paper, a dual-buck-boost ac/dc...... converter for use in the united-grounding-configuration-based dc nanogrid with three terminal outputs is proposed. The working principle of this converter is presented in detail through analyzing the equivalent circuits. Experiments are carried out to verify the theoretical analysis....

  1. A high voltage ratio and low ripple interleaved DC-DC converter for fuel cell applications.

    Science.gov (United States)

    Chang, Long-Yi; Chao, Kuei-Hsiang; Chang, Tsang-Chih

    2012-01-01

    This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doubler boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Besides, it can lower the current stress for the switches and inductors in the system. First, the PSIM software was used to establish a proton exchange membrane fuel cell and a converter circuit model. The simulated and measured results of the fuel cell output characteristic curve are made to verify the correctness of the established simulation model. In addition, some experimental results are made to validate the effectiveness in improving output voltage ripple of the proposed high voltage ratio interleaved boost DC-DC converters.

  2. Les fluctuations supraconductrices dans le compose praseodyme-cerium-oxyde de cuivre

    Science.gov (United States)

    Renaud, Jacques

    Ce travail etudie les fluctuations supraconductrices dans le compose supraconducteur a haute temperature critique dope aux electrons Pr2-xCe xCuO4+delta. La technique utilisee pour sonder ces fluctuations est le transport electrique DC dans le plan ab. Il s'agit, a notre connaissance, de la premiere etude de ce type dans la classe generale des supraconducteurs a haute temperature critique dopes aux electrons et, plus particulierement, dans Pr2-xCe xCuO4+delta. De plus, l'etude est effectuee pour trois regimes de dopage, soit sous-dope x = 0.135, dopage optimal x = 0.15 et surdope x = 0.17. Les echantillons etudies sont des couches minces d'epaisseur plus grande que 100 nm crues par ablation laser. Les mesures electriques DC effectuees dans ce travail sont la resistance en reponse lineaire et les courbes IV en reponse non lineaire en fonction de la temperature. La mise en oeuvre experimentale de ces mesures a necessite une grande attention au filtrage et aux effets de chauffage a haut courant. Nous montrons que, sans cette attention, les donnees experimentales sont toujours erronees dans le regime pertinent pour nos echantillons. Les resultats pour le dopage optimal x = 0.15 sont expliques de facon tres convaincante dans le cadre de fluctuations purement 2D. D'abord, le regime des fluctuations gaussiennes est tres bien decrit par le modele d'Aslamazov-Larkin en deux dimensions. Ensuite, le regime de fluctuations critiques, se trouvant a plus basse temperature que le regime gaussien, est tres bien decrit par la physique 2D de Kosterlitz-Thouless. Dans cette analyse, les deux regimes ont des temperatures critiques coherentes entre elles, ce qui semble confirmer ce scenario 2D. Une analyse des donnees dans le cadre de fluctuations 3D est exploree mais donne des conclusions incoherentes. Les resultats pour les autres dopages sont qualitativement equivalents avec le dopage optimal et permettent donc une explication purement 2D. Par contre, contrairement au dopage optimal

  3. DIVERSITAS DAN KERAPATAN MANGROVE, GASTROPODA DAN BIVALVIA DI ESTUARI PERANCAK, BALI

    OpenAIRE

    Susiana; Ali, Syamsu Alam; Rukminasari, Nita

    2011-01-01

    Penelitian ini bertujuan membandingkan diversitas dan kerapatan mangrove dengan kepadatan gastropoda dan bivalvia di mangrove alami dan rehabilitasi. Pengukuran ekosistem mangrove menggunakan transek kuadrat 10 m x 10 m. Kelimpahan dan kepadatan gastropoda dan bialvia menggunakan transek kuadrat berukuran 1 m x 1 m. Analisis nMDS, cluster untuk melihat hubungan karekteristik mangrove alami dan rehabilitasi dianalisis secara deskriptif dan analisis regresi untuk mendetermi...

  4. Improved DC Gun Insulator Assembly

    International Nuclear Information System (INIS)

    Neubauer, M.L.; Dudas, A.; Sah, R.; Poelker, M.; Surles-Law, K.E.L.

    2010-01-01

    Many user facilities such as synchrotron radiation light sources and free electron lasers require accelerating structures that support electric fields of 10-100 MV/m, especially at the start of the accelerator chain where ceramic insulators are used for very high gradient DC guns. These insulators are difficult to manufacture, require long commissioning times, and often exhibit poor reliability. Two technical approaches to solving this problem will be investigated. Firstly, inverted ceramics offer solutions for reduced gradients between the electrodes and ground. An inverted design will be presented for 350 kV, with maximum gradients in the range of 5-10 MV/m. Secondly, novel ceramic manufacturing processes will be studied, in order to protect triple junction locations from emission, by applying a coating with a bulk resistivity. The processes for creating this coating will be optimized to provide protection as well as be used to coat a ceramic with an appropriate gradient in bulk resistivity from the vacuum side to the air side of an HV standoff ceramic cylinder. Example insulator designs are being computer modelled, and insulator samples are being manufactured and tested

  5. Investigations of dc breakdown fields

    CERN Document Server

    Ramsvik, Trond; Reginelli, Alessandra; Taborelli, Mauro

    2006-01-01

    The need for high accelerating gradients for the future 30 GHz multi-TeV e+e- Compact Linear Collider (CLIC) at CERN has triggered a comprehensive study of DC breakdown fields of metals in UHV. The study shows that molybdenum (Mo), tungsten (W), titanium (Ti) and TiVAl reach high breakdown fields, and are thus good candidates for the iris material of CLIC structures. A significant decrease in the saturated breakdown field (Esat) is observed for molybdenum and tungsten when exposed to air. Specifically, at air pressures of 10-5 mbar, the decrease in Esat is found to be 50% and 30% for molybdenum and tungsten, respectively. In addition, a 30% decrease is found when molybdenum is conditioned with a CO pressure of ~1-10-5 mbar. Surface analysis measurements and breakdown conditioning in O2 ambience imply that the origin of the decrease in Esat is closely linked to oxide formation on the cathode surface. "Ex-situ" treatments by ion bombardment of molybdenum effectively reduce the oxide layers, and improve the brea...

  6. A THREE-PHASE BOOST DC-AC CONVERTER

    African Journals Online (AJOL)

    dc-ac converter (inverter) based on the dc-dc boost converters. ... Sliding mode controllers are designed to perform a robust control for the ... Computer simulations and spectral analysis demon- ... the conventional three-phase buck inverter,.

  7. 75 FR 75872 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-30, DC-9-40, and DC-9-50...

    Science.gov (United States)

    2010-12-07

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-30, DC-9-40, and DC-9-50 Series Airplanes...: We are adopting a new airworthiness directive (AD) for the McDonnell Douglas Corporation airplanes... to include an airworthiness directive (AD) that would apply to certain McDonnell Douglas Model DC-9...

  8. Pulsed-DC selfsputtering of copper

    International Nuclear Information System (INIS)

    Wiatrowski, A; Posadowski, W M; Radzimski, Z J

    2008-01-01

    At standard magnetron sputtering conditions (argon pressure ∼0.5 Pa) inert gas particles are often entrapped in the formed films. Inert gas contamination can be eliminated by using the self-sustained magnetron sputtering process because it is done in the absence of the inert gas atmosphere. The self-sustained sputtering (SSS) gives also a unique condition during the transport of sputtered particles to the substrate. It is especially useful for filling high aspect ratio submicron scale structures for microelectronics. So far it has been shown that the self-sputtering process can be sustained in the DC operation mode (DC-SSS) only. The main disadvantage of DC-SSS process is instability related to possible arc formation. Usage of pulsed sputtering, similarly to reactive pulsed magnetron sputtering, could eliminate this problem. In this paper results of pulsed-DC self-sustained magnetron sputtering (pulsed DC-SSS) of copper are presented for the first time. The planar magnetron equipped with a 50 mm in diameter and 6 mm thick copper target was powered by DC-power supply modulated by power switch. The maximum target power was about 11 kW (∼550W/cm 2 ). The magnetron operation was investigated as a function of pulsing frequency (20-100 kHz) and duty factor (50-90%). The discharge extinction pressure was determined for these conditions. The plasma emission spectra (400-410nm range) and deposition rates were observed for both DC and pulsed DC sustained self-sputtering processes. The presented results illustrate that stable pulsed DC-SSS process can be obtained at pulsing frequency in the range of 60-100 kHz and duty factor of 70-90%

  9. Pulsed-DC selfsputtering of copper

    Science.gov (United States)

    Wiatrowski, A.; Posadowski, W. M.; Radzimski, Z. J.

    2008-03-01

    At standard magnetron sputtering conditions (argon pressure ~0.5 Pa) inert gas particles are often entrapped in the formed films. Inert gas contamination can be eliminated by using the self-sustained magnetron sputtering process because it is done in the absence of the inert gas atmosphere. The self-sustained sputtering (SSS) gives also a unique condition during the transport of sputtered particles to the substrate. It is especially useful for filling high aspect ratio submicron scale structures for microelectronics. So far it has been shown that the self-sputtering process can be sustained in the DC operation mode (DC-SSS) only. The main disadvantage of DC-SSS process is instability related to possible arc formation. Usage of pulsed sputtering, similarly to reactive pulsed magnetron sputtering, could eliminate this problem. In this paper results of pulsed-DC self-sustained magnetron sputtering (pulsed DC-SSS) of copper are presented for the first time. The planar magnetron equipped with a 50 mm in diameter and 6 mm thick copper target was powered by DC-power supply modulated by power switch. The maximum target power was about 11 kW (~550W/cm2). The magnetron operation was investigated as a function of pulsing frequency (20-100 kHz) and duty factor (50-90%). The discharge extinction pressure was determined for these conditions. The plasma emission spectra (400-410nm range) and deposition rates were observed for both DC and pulsed DC sustained self-sputtering processes. The presented results illustrate that stable pulsed DC-SSS process can be obtained at pulsing frequency in the range of 60-100 kHz and duty factor of 70-90%.

  10. DAKWAH DAN PEMBERDAYAAN PEREMPUAN

    Directory of Open Access Journals (Sweden)

    Siti Nurmahyati

    2017-02-01

    Full Text Available Da’wah is an attempt to persuade and influence others in realizing the teachings of Islam, to achieve worldly prosperity and welfare of the hereafter. The success was fueled by propaganda aspects are interrelated, anatara preachers, propaganda material, propaganda strategy, mad’u (target da’wah. The number of women in this country nearly half of people (49.36. therefore, it is important to empower women in da’wah to build their own people in consciousness and religious activities that provide the basics of life prosperous world and hereafter.   Dakwah merupakan suatu upaya untuk mengajak dan mempengaruhi orang lain dalam merealisasikan ajaran Islam, untuk mencapai tujuan kesejahteraan duniawi maupun kesejahteraan ukhrawi. Keberhasilan tersebut pun dipicu oleh berbagai aspek dakwah yang saling terkait, antara juru dakwah, materi dakwah, strategi dakwah, mad’u (sasaran dakwah. Jumlah kaum perempuan di negara ini hampir mencapai separuh dari jumlah masyarakatnya (49,36. Oleh karena itu, sangat penting sekali pemberdayaan perempuan dalam dakwah untuk membangun kaumnya sendiri dalam kesadaran dan aktivitas-aktivitas keagamaan yang memberikan dasar kehidupan sejahtera duniawi dan ukhrawi.

  11. ASIMETRI INFORMASI DAN UNDERPRICING

    Directory of Open Access Journals (Sweden)

    Tety Anggita Safitri

    2013-03-01

    Full Text Available Tujuan penelitian ini adalah untuk menguji pengaruh asimetri informasi terhadap underpricing. Penelitian ini menggunakan sampel 63 perusahaan yang melakukan penawaran umum perdana di Bursa Efek Indonesia dalam kurun waktu 2005-2010. Analisis data menggunakan regresi linier berganda, yaitu menguji proksi asimetri informasi yang terdiri atas ukuran perusahaan, umur perusahaan, proporsi saham yang ditawarkan kepada masyarakat, reputasi underwriter dan reputasi auditor terhadap underpricing. Hasil penelitian ini mengindikasikan bahwa reputasi underwriter dan reputasi auditor berpengaruh terhadap underpricing. Ukuran perusahaan, umur perusahaan dan proporsi saham yang ditawarkan tidak berpengaruh terhadap underpricing.The aim of this research is to examine the effect of assymetric information on underpricing. This research used a sample of 63 companies that make initial public offering on the Indonesia Stock Exchange in the period of 2005-2010. The data analysis is using multiple linear regression, which is testing the proxy of asymmetric information which consists of the firm size, the firm age, the proportion of shares offered to the public, underwriter reputation and auditor reputation on underpricing. This research indicates that underwriter reputation and auditor reputation have a significant effect on underpricing. The firm size, the firm age and the proportion of shares offered to the public have no significant effect on underpricing.

  12. Superconducting DC homopolar motors for ship propulsion

    Energy Technology Data Exchange (ETDEWEB)

    Heiberger, M.; Reed, M.R.; Creedon, W.P.; O' Hea, B.J. [General Atomic (United States)

    2000-07-01

    Superconducting DC homopolar motors have undergone recent advances in technology, warranting serious consideration of their use for ship propulsion. Homopolar motor propulsion is now practical because of two key technology developments: cryogen-free superconducting refrigeration and high performance motor fiber brushes. These compact motors are ideal for podded applications, where reduced drag and fuel consumption are predicted. In addition, the simple DC motor controller is more efficient and reliable compared with AC motor controllers. Military ships also benefit from increased stealth implicit in homopolar DC excitation, which also allows the option for direct hull or pod mounting. (authors)

  13. DC-Compensated Current Transformer †

    Science.gov (United States)

    Ripka, Pavel; Draxler, Karel; Styblíková, Renata

    2016-01-01

    Instrument current transformers (CTs) measure AC currents. The DC component in the measured current can saturate the transformer and cause gross error. We use fluxgate detection and digital feedback compensation of the DC flux to suppress the overall error to 0.15%. This concept can be used not only for high-end CTs with a nanocrystalline core, but it also works for low-cost CTs with FeSi cores. The method described here allows simultaneous measurements of the DC current component. PMID:26805830

  14. DESAIN DAN IMPLEMENTSI SOFT SWITCHING BOOST KONVERTER DENGAN SIMPLE AUXILLARY RESONANT SWITCH (SARC

    Directory of Open Access Journals (Sweden)

    Dimas Bagus Saputra

    2017-01-01

    Full Text Available Boost konverter merupakan penaik tegangan DC ke tegangan DC yang mempunyai tegangan output yang lebih tinggi dibanding inputnya. Penggunaan boost konverter diera modern semakin meningkat dan dibuat dengan dimensi yang lebih kecil, berat yang lebih ringan dan efisiensi yang lebih tinggi dibanding dengan boost konverter generasi terdahulu. Tetapi rugi-rugi periodik saat on/off meningkat. Untuk meraih kriteria tersebut, teknik hard switching boost konverter berevolusi menjadi teknik soft switching dengan menambah rangkaian simple auxiliary resonant circuit (SARC. Karena penambahan rangkaian SARC tersebut konverter bekerja pada kondisi zero-voltage switching switch (ZVS dan zero current switch (ZCS, sehingga saklar semikonduktor tidak bekerja secara hard switching lagi. Pada penelitian ini akan di desain dan diimplementaskan soft switching boost konverter dengan SARC. Kelebihan dari soft switching boost konverter dengan SARC adalah mempunyai efisiensi yang lebih tinggi dibanding dengan boost konverter konventional. Dari hasil implementasi menunjukkan konverter yang diajukan telah meraih zero voltage switch (ZVS. Sehingga boost konverter zero voltage switch (ZVS bisa diaplikasikan pada sistem power suplay yang membutuhkan efisiensi energi yang tinggi terutama pada daya yang tinggi.

  15. High power density dc/dc converter: Selection of converter topology

    Science.gov (United States)

    Divan, Deepakraj M.

    1990-01-01

    The work involved in the identification and selection of a suitable converter topology is described. Three new dc/dc converter topologies are proposed: Phase-Shifted Single Active Bridge DC/DC Converter; Single Phase Dual Active Bridges DC/DC Converter; and Three Phase Dual Active Bridges DC/DC Converter (Topology C). The salient features of these topologies are: (1) All are minimal in structure, i.e., each consists of an input and output bridge, input and output filter and a transformer, all components essential for a high power dc/dc conversion process; (2) All devices of both the bridges can operate under near zero-voltage conditions, making possible a reduction of device switching losses and hence, an increase in switching frequency; (3) All circuits operate at a constant frequency, thus simplifying the task of the magnetic and filter elements; (4) Since, the leakage inductance of the transformer is used as the main current transfer element, problems associated with the diode reverse recovery are eliminated. Also, this mode of operation allows easy paralleling of multiple modules for extending the power capacity of the system; (5) All circuits are least sensitive to parasitic impedances, infact the parasitics are efficently utilized; and (6) The soft switching transitions, result in low electromagnetic interference. A detailed analysis of each topology was carried out. Based on the analysis, the various device and component ratings for each topology operating at an optimum point, and under the given specifications, are tabulated and discussed.

  16. CISH is induced during DC development and regulates DC-mediated CTL activation.

    Science.gov (United States)

    Miah, Mohammad Alam; Yoon, Cheol-Hee; Kim, Joonoh; Jang, Jinah; Seong, Young-Rim; Bae, Yong-Soo

    2012-01-01

    The cytokine inducible SH2-domain protein (CISH) is a well-known STAT5 target gene, but its role in the immune system remains uncertain. In this study, we found that CISH is predominantly induced during dendritic cell (DC) development from mouse bone marrow (BM) cells and plays a crucial role in type 1 DC development and DC-mediated CTL activation. CISH knockdown reduced the expression of MHC class I, co-stimulatory molecules and pro-inflammatory cytokines in BMDCs. Meanwhile, the DC yield was markedly enhanced by CISH knockdown via cell-cycle activation and reduction of cell apoptosis. Down-regulation of cell proliferation at the later stage of DC development was found to be associated with CISH-mediated negative feedback regulation of STAT5 activation. In T-cell immunity, OT-1 T-cell proliferation was significantly reduced by CISH knockdown in DCs, whereas OT-2 T-cell proliferation was not affected by CISH knockdown. CTLs generated by DC vaccination were also markedly reduced by CISH knockdown, followed by significant impairment of DC-based tumor immunotherapy. Taken together, our data suggest that CISH expression at the later stage of DC development triggers the shutdown of DC progenitor cell proliferation and facilitates DC differentiation into a potent stimulator of CTLs. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Changhao Piao

    2014-01-01

    Full Text Available The fast response, high efficiency, and good reliability are very important characteristics to electric vehicles (EVs dc/dc converters. Two-stage dc-dc converter is a kind of dc-dc topologies that can offer those characteristics to EVs. Presently, nonlinear control is an active area of research in the field of the control algorithm of dc-dc converters. However, very few papers research on two-stage converter for EVs. In this paper, a fixed switching frequency sliding mode (FSFSM controller and double-integral sliding mode (DISM controller for two-stage dc-dc converter are proposed. And a conventional linear control (lag is chosen as the comparison. The performances of the proposed FSFSM controller are compared with those obtained by the lag controller. In consequence, the satisfactory simulation and experiment results show that the FSFSM controller is capable of offering good large-signal operations with fast dynamical responses to the converter. At last, some other simulation results are presented to prove that the DISM controller is a promising method for the converter to eliminate the steady-state error.

  18. Studi Komparasi Fungsi Keanggotaan Fuzzy sebagai Kontroler Bidirectional DC-DC Converter pada Sistem Penyimpan Energi

    Directory of Open Access Journals (Sweden)

    Eka Prasetyono

    2015-09-01

    Full Text Available Bidirectional DC-DC converter is needed in the energy storage system. The converter topology used in this paper was a non-isolated bidirectional DC-DC buck-boost converter. This converter worked in two ways, which the charging mode stored energy into battery when load current was less than nominal main DC current (set point and discharging mode transferred energy from battery to the load when its current exceeded set point value. Both of these modes worked automatically according to the load current. The charging and discharging currents were controlled by fuzzy logic controller which was implemented on microcontroller ARM Cortex-M4F STM32F407VG. This paper compares two types of fuzzy membership function (triangular and sigmoid in controlling bidirectional DC-DC converter. The results showed that fuzzy logic controller with triangle membership function and sigmoid as control bidirectional DC-DC converter had no significant different response, both had an average error for charging and discharging process under 4% with ripple current on the main DC bus around 0.5%. The computing time of program for fuzzy logic controller with triangular membership functions had 19.01% faster than sigmoid, and fuzzy logic computation time on a microcontroller with hardware floating point was 60% faster than software floating point.

  19. DAMPAK NEGATIF PERKEMBANGAN TEKNOLOGI INFORMATIKA DAN KOMUNIKASI DAN CARA ANTISIFASINYA

    Directory of Open Access Journals (Sweden)

    I Gede Ratnaya

    2011-03-01

    Full Text Available Sampai saat ini perkembangan ilmu pengetahuan telah menghantarkan masyarakat menuju babak baru yaitu babak yang memanfaatkan peralatan-peralatan yang merupakan hasil dari teknologi. Penggunaan tenaga manusia yang semakin hari semakin kecil volumenya sering kali menyebabkan orang kehilangan pekerjaannya karena tugasnya telah tergantikan oleh peralatan atau mesin. Sebagai sarana penyampaian informasi dan komunikasi, komputer bisa dipakai sebagai sarana berinternetan. Lewat internet orang bisa mencari bermacam-macam informasi dan berkomunikasi. Peran yang dapat diberikan oleh aplikasi teknologi informasi ini adalah mendapatkan informasi untuk kehidupan pribadi seperti informasi tentang kesehatan, hobi, rekreasi, dan rohani. Selain memberikan keuntungan, ternyata peralatan teknologi informasi dan komunikasi juga memberikan dampak negatif bagi penggunanya. Dampak negatif tersebut muncul sebagai akibat dari penggunaan yang salah atau tidak bertanggung jawab dari yang menggunakan. Beberapa dampak negatif tersebut adalah 1. Anak lebih banyak menghabiskan waktu menonton TV ketimbang melakukan hal lainnya (seperti belajar dan olah raga, 2. Anak kehilangan kemampuan berbaur dengan masyarakat dan cenderung nyaman dengan kehidupan online, 3 Adanya pelanggaran hak cipta, 4.  Kejahatan di internet, 5. Penyebaran virus komputer, dan 6. Pornografi, perjudian, penipuan, tayangan kekerasan. Adapun cara mengatasi dampak-dampak negatif tersebut adalah : 1. Gunakan teknologi untuk menjalin hubungan dengan orang yang sudah dikenal, 2. Cari komunitas positif  yang sering melakukan pertemuan didunia nyata, 3. Perlunya penegakkan hukum yang berlaku dengan dibentuknya polisi internet, 4. Menghindari pemakaian telepon seluler yang berfitur canggih oleh anak-anak dibawah umur dan lebih mengawasi penggunaan telepon seluler, 5. Perbanyak membaca buku-buku yang bersifat edukatif dan bersifat keimanan serta aplikasi komputer yang bersifat mendidik, dan 6. Perlunya pengaturan

  20. NAMMA DC-8 DROPSONDE V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The DC-8 dropsonde system uses an integrated, highly accurate, GPS-located atmospheric profiling dropsonde, which measures and records current atmospheric conditions...

  1. dc power system for deuteron accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Creek, K.O.; Liska, D.J.

    1981-01-01

    The Fusion Materials Irradiation Test (FMIT) Facility dc power system provides excitation current for all linac and High-Energy Beam Transport (HEBT) quadrupole and bending magnets, excitation for horizontal and vertical beam steering, and current-bypass shunts.

  2. Determination of input/output characteristics of full-bridge AC/DC/DC converter for arc welding

    OpenAIRE

    Stefanov, Goce; Karadzinov, Ljupco; Sarac, Vasilija; Cingoski, Vlatko; Gelev, Saso

    2016-01-01

    This paper describes the design and practical implementation of AC/DC/DC converter in mode of arc welding. An analysis of the operation of AC/DC/DC converter and its input/output characteristics are determined with computer simulations. The practical part is consisted of AC/DC/DC converter prototype for arc welding with output power of 3 kW and switching frequency of 64 kHz. The operation of AC/DC/DC converter is validated with experimental measurements.

  3. Ultra-high Efficiency DC-DC Converter using GaN Devices

    DEFF Research Database (Denmark)

    Ramachandran, Rakesh

    2016-01-01

    properties of GaN devices can be utilized in power converters to make them more compact and highly efficient. This thesis entitled “Ultra-high Efficiency DC-DC Converter using GaN devices” focuses on achieving ultra-high conversion efficiency in an isolated dc-dc converter by the optimal utilization of Ga...... for many decades. However, the rate of improvement slowed as the silicon power materials asymptotically approached its theoretical bounds. Compared to Si, wideband gap materials such as Silicon Carbide (SiC) and Gallium Nitride (GaN) are promising semiconductors for power devices due to their superior...... in this thesis. Efficiency measurements from the hardware prototype of both the topologies are also presented in this thesis. Finally, the bidirectional operation of an optimized isolated dc-dc converter is presented. The optimized converter has achieved an ultra-high efficiency of 98.8% in both directions...

  4. Modeling, Analysis and Control of Different DC-DC Converter Topologies for Photo Voltaic Emulator

    Directory of Open Access Journals (Sweden)

    Mohammad Tauquir Iqbal

    2016-05-01

    Full Text Available This paper presents the modeling, analysis and control of different DC-DC converter topologies to emulate the photovoltaic (PV system. A PV emulator is basically a DC-DC converter having same electrical characteristics that of solar PV panel.  The emulator helps to achieve real characteristics of PV system in a better way in an environment where using actual PV systems can produce inconsistent results due to variation in weather conditions. The paper describes different types of DC-DC converters like buck, Resonant and Quasi Resonant Converter. The complete system is modelled in MATLAB® Simulink SimPowerSystem software package. The Simulation results obtained from the MATLAB® Simulink SimPowerSystem software package for different topologies under steady and dynamic conditions are analyzed and presented. An evaluation table is also presented at the end of the paper, presenting the effectiveness of each topology.

  5. Application handbook for a Standardized Control Module (SCM) for DC-DC converters, volume 1

    Science.gov (United States)

    Lee, F. C.; Mahmoud, M. F.; Yu, Y.

    1980-01-01

    The standardized control module (SCM) was developed for application in the buck, boost and buck/boost DC-DC converters. The SCM used multiple feedback loops to provide improved input line and output load regulation, stable feedback control system, good dynamic transient response and adaptive compensation of the control loop for changes in open loop gain and output filter time constraints. The necessary modeling and analysis tools to aid the design engineer in the application of the SCM to DC-DC Converters were developed. The SCM functional block diagram and the different analysis techniques were examined. The average time domain analysis technique was chosen as the basic analytical tool. The power stage transfer functions were developed for the buck, boost and buck/boost converters. The analog signal and digital signal processor transfer functions were developed for the three DC-DC Converter types using the constant on time, constant off time and constant frequency control laws.

  6. Application handbook for a Standardized Control Module (SCM) for DC-DC converters, volume 1

    Science.gov (United States)

    Lee, F. C.; Mahmoud, M. F.; Yu, Y.

    1980-04-01

    The standardized control module (SCM) was developed for application in the buck, boost and buck/boost DC-DC converters. The SCM used multiple feedback loops to provide improved input line and output load regulation, stable feedback control system, good dynamic transient response and adaptive compensation of the control loop for changes in open loop gain and output filter time constraints. The necessary modeling and analysis tools to aid the design engineer in the application of the SCM to DC-DC Converters were developed. The SCM functional block diagram and the different analysis techniques were examined. The average time domain analysis technique was chosen as the basic analytical tool. The power stage transfer functions were developed for the buck, boost and buck/boost converters. The analog signal and digital signal processor transfer functions were developed for the three DC-DC Converter types using the constant on time, constant off time and constant frequency control laws.

  7. Test Results of Selected Commercial DC/DC Converters under Cryogenic Temperatures - A Digest

    Science.gov (United States)

    Patterson, Richard; Hammoud, Ahmad

    2010-01-01

    DC/DC converters are widely used in space power systems in the areas of power management and distribution, signal conditioning, and motor control. Design of DC/DC converters to survive cryogenic temperatures will improve the power system performance, simplify design, and reduce development and launch costs. In this work, the performance of nine COTS modular, low-tomedium power DC/DC converters was investigated under cryogenic temperatures. The converters were evaluated in terms of their output regulation, efficiency, and input and output currents. At a given temperature, these properties were obtained at various input voltages and at different load levels. A summary on the performance of the tested converters was given. More comprehensive testing and in-depth analysis of performance under long-term exposure to extreme temperatures are deemed necessary to establish the suitability of these and other devices for use in the harsh environment of space exploration missions.

  8. Precharge strategies for isolated modular DC-DC converters under two different start-up conditions

    DEFF Research Database (Denmark)

    Zhang, Yi; Wang, Huai; Li, Binbin

    2017-01-01

    The isolated modular DC-DC converter (IMDCC) is a new topology designed to connect high-voltage direct current (HVDC) lines with different voltage levels, which ties two DC grids by using two modular multilevel converters (MMCs) via a medium-frequency transformer. Due to the large value of capaci......The isolated modular DC-DC converter (IMDCC) is a new topology designed to connect high-voltage direct current (HVDC) lines with different voltage levels, which ties two DC grids by using two modular multilevel converters (MMCs) via a medium-frequency transformer. Due to the large value...... of capacitance in the IMDCC, proper precharge strategies before the start-up are significant for the safety and reliability of the whole system. This paper presents two closed-loop precharge control strategies to fully charge the sub-module (SM) capacitors of the IMDCC, considering two different start...

  9. KETERGANTUNGAN ONLINE GAME DAN PENANGANANNYA

    Directory of Open Access Journals (Sweden)

    Ridwan Syahran

    2015-06-01

    Full Text Available Penelitian ini dimaksudkan untuk mengetahui perilaku yang ditimbulkan dari kecanduan bermaian online game pada siswa SMP Negeri 1 Palu yang meliputi faktor-faktor penyebab kecanduan, keadaan psikologis yang ditimbulkan dari kecanduan bermain online game dan dampak-dampak yang ditimbulkan dari kecanduan bermain online game.Pendekatan penelitian ini adalah penelitian kualitatif dengan jenis penelitian studi kasus dengan berdasarkan responden dan informan sebagai bahan sumber data. Dalam proses pengumpulan data digunakan teknik observasi dan wawancara, dimana setelah data diperoleh selanjutnya dianalisis dengan menggunakan analisis deskriptif kualitatif.Berdasarkan hasil penelitian ini, bahwa subyek (RZ dan (MT, kedua subyek penelitian menjadi ketergantungan atau kecanduan untuk bermain online game yang dikarenakan tersedianya beberapa fasilitas pendukung untuk bermain game di rumah, adanya faktor sosial dari pertemanan dengan teman bermain dan keingintahuan yang sangat besar terhadap suatu jenis game. Penanganan ketergantungan game online dengan bantuan dari berbagai pihak terutama pihak sekolah memberikan kepercayaan kepada konselor sekolah atau guru BK untuk mengadakan seminar kepada orang tua siswa tentang game online dan masalah yang akan ditimbulkan, mengatur waktu belajar dan bermain anak, memasukkan materi tentang game online dan dampaknya kepada siswa serta memberikan penyaluran yang baik dalam memilih game yang edukatif serta Menjalin komunikasi interpersonal agar anak dapat terbuka dengan orang tua.

  10. Kingsnorth-London dc transmission link

    Energy Technology Data Exchange (ETDEWEB)

    1966-03-11

    The hvdc transmission link between one of the 500 MW generators at Kingsnorth Power Station and two receiving stations in London will use a three-wire dc cable system rated to carry 1200 A at +- 266 kV. This 51-mile system will be the first dc link in the world to be used as an integral part of a complex interconnected ac network.

  11. Hole history, rotary hole DC-3

    International Nuclear Information System (INIS)

    1977-10-01

    Purpose of hole DC-3 was to drill into the Umtanum basalt flow using both conventional rotary and core drilling methods. The borehole is to be utilized for geophysical logging, future hydrological testing, and the future installation of a borehole laboratory for long-term pressure, seismic, and moisture migration or accumulation recording in the Umtanum basalt flow in support of the Basalt Waste Isolation Program. Hole DC-3 is located east of the 200 West barricaded area on the Hanford reservation

  12. DC-8 MTP calibration for SOLVE-2

    Science.gov (United States)

    Mahoney, M. J.

    2003-01-01

    The Jet Propulsion Laboratory (JPL) Microwave Temperature Profiler (MTP) was the only instrument making temperature measurements at and below flight level on the DC-8 during the SOLVE-2 campaign. Many years of careful comparison of MTP measurements with radiosondes near the DC-8 flight track have shown that the flight level temperature can be determined to an accuracy of 0.2K relative to radiosondes.

  13. dc illusion and its experimental verification

    Science.gov (United States)

    Liu, Min; Lei Mei, Zhong; Ma, Xiang; Cui, Tie Jun

    2012-07-01

    Based on the transformation optics method, we propose a dc illusion device, which can transform a metallic object into a magnified dielectric object using anisotropic conducting materials. Utilizing the analogy between electric conductivities and resistor networks, we design and fabricate the device using metal film resistors. The practical measurement data agree very well with simulation results. The proposed dc illusion device is easy to process and measure, and thus has potential applications in various sectors.

  14. Characterization of diode valve in medium voltage dc/dc converter for wind turbines

    DEFF Research Database (Denmark)

    Dincan, Catalin Gabriel; Kjær, Philip Carne

    2016-01-01

    This paper proposes a methodology for characterization of medium voltage (MV), medium frequency (MF) rectifier diode valve. The intended application is for 10MW dc/dc converters used in DC offshore wind turbines. Sensitivity to semiconductor component parameter variation, snubber component tolera...... tolerance, influence of temperature and stray capacitance are analyzed. It is concluded that the largest impact on sensitivity is given by reverse recovery charge variation and differences of temperature between adjacent devices....

  15. Computer Simulation of Phase Shifted Series Resonant DC to DC Converter

    Directory of Open Access Journals (Sweden)

    P. PARVATHY

    2016-01-01

    Full Text Available This paper deals with digital simulation of phase shifted series resonant DC to DC converter using Matlab Simulink. The Simulink models for open loop and closed loop systems are developed and they are used for simulation studies. This converter is capable of producing ripple free DC output. Switching losses and switching stresses are reduced by using soft switching. This converter has advantages like high power density and low switching losses. Theoretical predictions are well supported by the simulation results.

  16. DC-Link Compensation Method for Slim DC Link Drives Fed by Soft Grid

    DEFF Research Database (Denmark)

    Mathe, Laszlo; Rosendahl Andersen, Henrik; Lazar, Radu

    2010-01-01

    Slim DC-link PWM (AC) drives for lowperformance applications are emerging on the market. Such drives equipped with a small DC-link capacitance exhibit instability tendencies, if installed on a soft line, giving a degraded performance. The total harmonic distortion (THD) and the partially weighted...... harmonic distortion (PWHD) of the line current are degraded, if resonance between the line impedance and the DC-link capacitance occurs. Likewise, the motor performance is affected negatively giving extra torque ripple, vibration and acoustic-noise emission. This paper proposes a novel DC-link compensation...

  17. Egr2 induced during DC development acts as an intrinsic negative regulator of DC immunogenicity.

    Science.gov (United States)

    Miah, Mohammad Alam; Byeon, Se Eun; Ahmed, Md Selim; Yoon, Cheol-Hee; Ha, Sang-Jun; Bae, Yong-Soo

    2013-09-01

    Early growth response gene 2 (Egr2), which encodes a zinc finger transcription factor, is rapidly and transiently induced in various cell types independently of de novo protein synthesis. Although a role for Egr2 is well established in T-cell development, Egr2 expression and its biological function in dendritic cells (DCs) have not yet been described. Here, we demonstrate Egr2 expression during DC development, and its role in DC-mediated immune responses. Egr2 is expressed in the later stage of DC development from BM precursor cells. Even at steady state, Egr2 is highly expressed in mouse splenic DCs. Egr2-knockdown (Egr2-KD) DCs showed increased levels of major histocompatability complex (MHC) class I and II and co-stimulatory molecules, and enhanced antigen uptake and migratory capacities. Furthermore, Egr2-KD abolished SOCS1 expression and signal transducer and activator of transcription 5 (STAT5) activation during DC development, probably resulting in the enhancement of IL-12 expression and Th1 immunogenicity of a DC vaccine. DC-mediated cytotoxic T lymphocyte (CTL) activation and antitumor immunity were significantly enhanced by Egr2-KD, and impaired by Egr2 overexpression in antigen-pulsed DC vaccines. These data suggest that Egr2 acts as an intrinsic negative regulator of DC immunogenicity and can be an attractive molecular target for DC vaccine development. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Analysis of high voltage step-up nonisolated DC-DC boost converters

    Science.gov (United States)

    Alisson Alencar Freitas, Antônio; Lessa Tofoli, Fernando; Junior, Edilson Mineiro Sá; Daher, Sergio; Antunes, Fernando Luiz Marcelo

    2016-05-01

    A high voltage step-up nonisolated DC-DC converter based on coupled inductors suitable to photovoltaic (PV) systems applications is proposed in this paper. Considering that numerous approaches exist to extend the voltage conversion ratio of DC-DC converters that do not use transformers, a detailed comparison is also presented among the proposed converter and other popular topologies such as the conventional boost converter and the quadratic boost converter. The qualitative analysis of the coupled-inductor-based topology is developed so that a design procedure can be obtained, from which an experimental prototype is implemented to validate the theoretical assumptions.

  19. High-Voltage DC-DC Converter Topology for PV Energy Utilization - Investigation and Implementation

    DEFF Research Database (Denmark)

    Sanjeevikumar, Padmanaban; Blaabjerg, Frede; Wheeler, Patrick

    2017-01-01

    This paper exploited the utilization of photovoltaic (PV) energy system with high-voltage (HV) output DC-DC converter. Classical boost converters are used for both renewable energy integration and HV applications, but limited by reducing output/efficiency in performance. Moreover, as parasitic...... elements suppress the power transfer ratio, converter needs to maximize the PV energy utilization. This investigation study focused to include additional parasitic elements (voltage-lift technique) to a standard DC-DC buck converter and to overcome all the above drawbacks to maximize the PV power...

  20. Digital peak current mode control with adaptive slope compensation for DC-DC converters

    DEFF Research Database (Denmark)

    Andersen, Karsten Holm; Nymand, Morten

    2017-01-01

    performance and stability of current mode control. The presented method adapt to DC-DC converter operating conditions by estimating the rising and falling inductor current slopes, to apply a current slope compensation value to obtain a constant quality factor. The experimental results verifies the theoretical......This paper presents an adaptive slope compensation method for peak current mode control of digital controlled DC-DC converters, which controls the quality factor of the complex conjugated poles at half the switching frequency. Using quality factor control enables optimization of the dynamic...

  1. A Novel PPFHB Bidirectional DC-DC Converter for Supercapacitor Application

    DEFF Research Database (Denmark)

    Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael Andreas E.

    2009-01-01

    This paper presents a novel bidirectional DC-DC converter for the supercapacitor application. In the proposed converter, push-pull forward with half bridge (PPFHB) voltage doubler structure is used to reduce the number of the power switches and get higher voltage gain. Based on phase-shift modula......This paper presents a novel bidirectional DC-DC converter for the supercapacitor application. In the proposed converter, push-pull forward with half bridge (PPFHB) voltage doubler structure is used to reduce the number of the power switches and get higher voltage gain. Based on phase...

  2. The application of standardized control and interface circuits to three dc to dc power converters.

    Science.gov (United States)

    Yu, Y.; Biess, J. J.; Schoenfeld, A. D.; Lalli, V. R.

    1973-01-01

    Standardized control and interface circuits were applied to the three most commonly used dc to dc converters: the buck-boost converter, the series-switching buck regulator, and the pulse-modulated parallel inverter. The two-loop ASDTIC regulation control concept was implemented by using a common analog control signal processor and a novel digital control signal processor. This resulted in control circuit standardization and superior static and dynamic performance of the three dc-to-dc converters. Power components stress control, through active peak current limiting and recovery of switching losses, was applied to enhance reliability and converter efficiency.

  3. Laboratory manual for pulse-width modulated DC-DC power converters

    CERN Document Server

    Kazimierczuk, Marian K

    2015-01-01

    Designed to complement a range of power electronics study resources, this unique lab manual helps students to gain a deep understanding of the operation, modeling, analysis, design, and performance of pulse-width modulated (PWM) DC-DC power converters.  Exercises focus on three essential areas of power electronics: open-loop power stages; small-signal modeling, design of feedback loops and PWM DC-DC converter control schemes; and semiconductor devices such as silicon, silicon carbide and gallium nitride. Meeting the standards required by industrial employers, the lab manual combines program

  4. A Bidirectional Multi-Port DC-DC Converter Integrating Voltage Equalizer

    DEFF Research Database (Denmark)

    Chen, Jianfei; Hou, Shiying; Deng, Fujin

    2015-01-01

    A novel bidirectional multi-port dc-dc converter integrating voltage equalizer based on switched-capacitor voltage accumulator (SCVA) is proposed. It has two operating modes of charging and discharging for battery modules. All battery modules are connected in series indirectly and can be equalize...... battery modules with different voltages. Simulation results has shown the feasibility of the proposed converter.......A novel bidirectional multi-port dc-dc converter integrating voltage equalizer based on switched-capacitor voltage accumulator (SCVA) is proposed. It has two operating modes of charging and discharging for battery modules. All battery modules are connected in series indirectly and can be equalized...

  5. A Bidirectional Resonant DC-DC Converter Suitable for Wide Voltage Gain Range

    DEFF Research Database (Denmark)

    Shen, Yanfeng; Wang, Huai; Al-Durra, Ahmed

    2018-01-01

    This paper proposes a new bidirectional resonant dc-dc converter suitable for wide voltage gain range applications (e.g., energy storage systems). The proposed converter overcomes the narrow voltage gain range of conventional resonant dc-dc converters, and meanwhile achieves high efficiency...... losses. The operation principles and characteristics of the proposed converter are firstly analyzed in this paper. Then the analytical solutions for the voltage gain, soft-switching, and rms currents are derived, which facilitates the parameters design and optimization. Finally, the proposed topology...... and analysis are verified with experimental results obtained from a 1-kW converter prototype....

  6. Design of the DC-DC power stage of the capacitor charger for MAXIDISCAP power converters

    CERN Document Server

    Cravero, Jean-Marc

    2013-01-01

    This technical report presents the design of the DC-DC power stage of the capacitor charger for MAXIDISCAP power converters. The power stage is based on a half bridge series resonant converter in Discontinuous Conduction Mode (DCM). This simple and robust topology allows obtaining a current source behavior with a low switching losses power stage. The associated control stage is implemented using a commercial controller which has differenti nternal circuits that allows a high integration of the converter control system. The report presents the design and tuning criteria for the DC-DC converter, including the power stage and the control system.

  7. Analysis and Design of Bi-Directional DC-DC Converter in the Extended Run Time DC UPS System Based on Fuel Cell and Supercapacitor

    DEFF Research Database (Denmark)

    Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael A. E.

    2009-01-01

    Abstract-In this paper, an extended run time DC UPS system structure with fuel cell and supercapacitor is investigated. A wide input range bi-directional dc-dc converter is described along with the phase-shift modulation scheme and phase-shift with duty cycle control, in different modes. The deli......Abstract-In this paper, an extended run time DC UPS system structure with fuel cell and supercapacitor is investigated. A wide input range bi-directional dc-dc converter is described along with the phase-shift modulation scheme and phase-shift with duty cycle control, in different modes...

  8. Impact of Faults and Protection Methods on DC Microgrids Operation

    DEFF Research Database (Denmark)

    Bayati, Navid; Hajizadeh, Amin; N. Soltani, Mohsen

    2018-01-01

    with the DC Microgrid. This paper evaluates and presents a comprehensive review on the most recent studies in the DC Microgrids protection. Moreover, the fault behavior and characteristics of DC Microgrids, the effect of Constant Power Load (CPL) , and recent DC Microgrid protection methods are reviewed. Also...

  9. Spectroscopic (IR, NMR) and conductometric characterization of lithium aluminum hydride - crown ethers complexes [Li{sup +}-C E](A I H{sub 4})- with C E=syn-isomers of DC 18-C-6 in benzene solutions; Caracterisation par spectrometrie (IR, RMN) et conductimetrie des complexes entre le tetrahydrualuminate de lithium LiAIH{sub 4} et l`ether-couronne DC 18-C-6* (isomeres cis-anti-cis et cis-syn-cis) en solution dans le benzene (*2,3,11,12-dicyclohexano-1,4,7,10,13,16-hexacyclooctadecane)

    Energy Technology Data Exchange (ETDEWEB)

    Bastide, J P; Ezzemouri, K; Carre, J; Bouamrane, A; Claudy, P [Institut National des Sciences Appliquees (INSA), 69 - Villeurbanne (France); Frange, B [Faculte des Sciences, 21 - Dijon (France)

    1996-03-01

    [Li{sup +}-C E](AIH{sub 4}){sup -} complexes with C E = syn and anti-isomers of the crown ether DC 18-C-6 have been characterized in benzene solutions by IR (infrared spectroscopy), NMR (nuclear magnetic resonance) and conductometry (at 298 K). The properties of these complexes are closely related to those of the cation [Li{sup +}-C E]. For the anti-isomer, no distortion of the macrocycle was noticed after complexation, the Li{sup +} trapped cation is coordinated with four oxygen atoms of the cavity, and the complex exhibits a covalent behavior. Electrical conductivity of the benzene solution is concentration independent and has a very low mean value ({lambda} = 0,06 {omega}{sup -1}.cm{sup 2}.mol{sup -1}). The macrocycle of the syn-isomer is drastically distorted after complexation. A tridimensional cavity is formed, in which the Li{sup +} trapped cation is coordinated with six oxygen atoms. As a consequence, the species exhibits a high degree of ionic character due to the stretching of the Li{sup +}---(AIH{sub 4}){sup -} bond. Electrical conductivity is enhanced for dilute solutions (x 10 at C 0,01 mol.L{sup -1}). The regular tetrahedral symmetry of (AIH{sub 4}){sup -} anion is retained in the molecular structure of the two complexes. Benzene solutions of [Li-+-syn-DC 18-C-6](AIH{sub 4}){sup -} appear to be the first example of free-(AIH{sub 4}){sup -} anions in a non-polar organic medium. (authors). 22 refs., 3 figs., 4 tabs.

  10. Transport de paires EPR dans des structures mesoscopiques

    Science.gov (United States)

    Dupont, Emilie

    Dans cette these, nous nous sommes particulierement interesses a la propagation de paires EPR1 delocalisees et localisees, et a l'influence d'un supraconducteur sur le transport de ces paires. Apres une introduction de cette etude, ainsi que du cadre scientifique qu'est l'informatique quantique dans lequel elle s'inscrit, nous allons dans le chapitre 1 faire un rappel sur le systeme constitue de deux points quantiques normaux entoures de deux fils supraconducteurs. Cela nous permettra d'introduire une methode de calcul qui sera reutilisee par la suite, et de trouver egalement le courant Josephson produit par ce systeme transforme en SQUID-dc par l'ajout d'une jonction auxiliaire. Le SQUID permet de mesurer l'etat de spin (singulet ou triplet), et peut etre forme a partir d'autres systemes que nous etudierons ensuite. Dans le chapitre 2, nous rappellerons l'etude detaillee d'un intricateur d'Andreev faite par un groupe de Bale. La matrice T, permettant d'obtenir le courant dans les cas ou les electrons sont separes spatialement ou non, sera etudiee en detail afin d'en faire usage au chapitre suivant. Le chapitre 3 est consacre a l'etude de l'influence du bruit sur le fonctionnement de l'intricateur d'Andreev. Ce bruit modifie la forme du courant jusqu'a aboutir a d'autres conditions de fonctionnement de l'intricateur. En effet, le bruit present sur les points quantiques peut perturber le transport des paires EPR par l'intermediaire des degres de liberte. Nous montrerons que, du fait de l'"intrication" entre la charge de la paire et le bruit, la paire est detruite pour des temps longs. Cependant, le resultat le plus important sera que le bruit perturbe plus le transport des paires delocalisees, qui implique une resonance de Breit-Wigner a deux particules. Le transport parasite n'implique pour sa part qu'une resonance de Breit-Wigner a une particule. Dans le chapitre 4, nous reviendrons au systeme constitue de deux points quantiques entoures de deux fils

  11. GAMBARAN JENIS DAN JUMLAH KONSUMSI FAST FOOD DAN SOFT DRINK PADA MAHASISWA OBESITAS DI UNIVERSITAS HASANUDDIN

    OpenAIRE

    Suryanti, Rut; Jafar, Nurhaedar; Syam, Aminuddin

    2013-01-01

    Konsumsi fast food dan soft drink dapat menyebabkan kelebihan berat badan dan obesitas.Penelitian ini bertujuan untuk mengetahui gambaran jenis dan jumlah zat gizi makro dari konsumsi fast food dan soft drink pada mahasiswa yang obesitas.Jenis penelitian adalah deskriptif, dilaksanakan pada bulan Mei-Juni 2013 di Universitas Hasanuddin dengan jumlah responden 60 orang. Instrument penelitian adalah kuesioner identitas diri dan food frekuensiSemiQuantitatif fast food dan soft drink, food pictur...

  12. PERSEPSI DAN TRANSFORMASI VISI DAN MISI PADA CIVITAS AKADEMIKA STAIN PEKALONGAN

    Directory of Open Access Journals (Sweden)

    Imam Khanafi

    2013-05-01

    Full Text Available Penelitian ini mengukur tingkat persepsi visi dan misi civitas akademika STAIN Pekalongan, dan mengukur juga tingkat implementasi sebagai transformasi visi misi tersebut serta menemukan hubungan antara persepsi dengan implementasinya. Kajian ini memiliki signifikan yang strategis dalam konteks manajemen dan pengembangan Pendidikan di STAIN Pekalongan dan lembaga pendidikan lainnya. Hal ini karena posisi visi dan misi sebagai kerangka acuan (frame of reference yang mengarahkan dan menjelaskan kepada keseluruh unsur civitas akademika dalam setiap program kerjanya.

  13. Perancangan dan Implementasi Kontroler Knowledge Based-PI pada Pengaturan Kecepatan Motor Induksi 3 Fasa

    Directory of Open Access Journals (Sweden)

    Muhammad Faisal Afif Alhamdi

    2014-03-01

    Full Text Available Tugas Akhir ini membahas desain dan implementasi kontroler Knowledge Based-PI untuk pengaturan kecepatan motor induksi 3 fasa yang diberikan efek pembebanan melalui sebuah rem elekromagnetik. Rem elektromagnetik terdiri dari beberapa kumparan yang diberi input tegangan DC melalui sebuah auto transformator (0-240V yang telah disearahkan. Prinsip dasar rem elektromagnetik menggunakan hukum Faraday dan hukum Lenz. Kedua hukum ini menimbulkan arus eddy yang melingkar dan menginduksi medan magnet sehingga dapat memberikan gaya lawan terhadap arah gaya pergerakan. Oleh karena itu dibutuhkan sebuah kontroler agar kecepatan motor tetap konstan sesuai Set Point dengan tingkatan pembebanan yang berbeda-beda. Kontroler Knowledge Based-PI dapat menjadi solusi dari permasalahan ini dengan  cara membentuk sebuah direktori parameter kontrol PI (Proportional Integrator untuk berbagai kondisi pembebanan yang dimuat ke dalam sebuah fungsi look-up table. Metode knowledge base bekerja berdasarkan pengambilan dan pencocokan data (appropriate. Adanya hubungan langsung antara input dan output, maka diperoleh banyak kemungkinan keputusan aksi kontrol. Penggunaan kontroler knowledge based-PI dapat mengurangi Error Steady State serta memberikan kemudahan dalam menentukan berbagai macam model sesuai dengan variasi pembebanan.

  14. Zero-voltage DC/DC converter with asymmetric pulse-width modulation for DC micro-grid system

    Science.gov (United States)

    Lin, Bor-Ren

    2018-04-01

    This paper presents a zero-voltage switching DC/DC converter for DC micro-grid system applications. The proposed circuit includes three half-bridge circuit cells connected in primary-series and secondary-parallel in order to lessen the voltage rating of power switches and current rating of rectifier diodes. Thus, low voltage stress of power MOSFETs can be adopted for high-voltage input applications with high switching frequency operation. In order to achieve low switching losses and high circuit efficiency, asymmetric pulse-width modulation is used to turn on power switches at zero voltage. Flying capacitors are used between each circuit cell to automatically balance input split voltages. Therefore, the voltage stress of each power switch is limited at Vin/3. Finally, a prototype is constructed and experiments are provided to demonstrate the circuit performance.

  15. Ultrahigh-density trench cpacitors in silicon and their application to integrated DC-DC conversion

    NARCIS (Netherlands)

    Roozeboom, F.; Bergveld, H.J.; Nowak, K.; Le Cornec, F.; Guiraud, L.; Bunel, C.; Iochem, S.; Ferreira, J.; Ledain, S.; Pieraerts, E.; Pommier, M.

    2009-01-01

    This paper addresses silicon-based integration of passive components applied to 3D integration with dies of other technologies within one package. Particularly, the development of high-density trench capacitors has enabled the realization of small-formfactor DC-DC converters. As illustration, an

  16. Reliability study of high gain DC-DC converters based on RRPP I-IIA ...

    Indian Academy of Sciences (India)

    J DIVYA NAVAMANI

    2018-05-10

    May 10, 2018 ... Energy Storage Modules (ESM), Propulsion Motor Mod- ules (PMM) and ... All Electric Ship (AES) is the best way to power all the loads in the ship ... also used to derive quadratic step down DC-DC converters. [6]. The attractive ...... Exhibition on Ecological Vehicles and Renewable Energies,. TamilNadu ...

  17. Investigation of DC-DC Boost Converter for Reliability of Operational Planning

    DEFF Research Database (Denmark)

    Khazraj, Hesam; Ashouri, Mani; Silva, Filipe Miguel Faria da

    2018-01-01

    of the interests related to reliability is the power semiconductor switches, which are the most vulnerable elements. The failure of one-power switches can reduce the system reliability. Interleaved technique for DC-DC converters is a redundant strategy to improve the reliability, but at the cost of increasing...

  18. A New Sliding Mode Controller for DC/DC Converters in Photovoltaic Systems

    Directory of Open Access Journals (Sweden)

    M. Sarvi

    2013-01-01

    Full Text Available DC/DC converters are widely used in many industrial and electrical systems. As DC/DC converters are nonlinear and time-variant systems, the application of linear control techniques for the control of these converters is not suitable. In this paper, a new sliding mode controller is proposed as the indirect control method and compared to a simple direct control method in order to control a buck converter in photovoltaic applications. The solar arrays are dependent power sources with nonlinear voltage-current characteristics under different environmental conditions (insolation and temperature. From this point of view, the DC/DC converter is particularly suitable for the application of the sliding mode control in photovoltaic application, because of its controllable states. Simulations are performed in Matlab/Simulink software. The simulation results are presented for a step change in reference voltage and input voltage as well as step load variations. The simulations results of proposed method are compared with the conventional PID controller. The results show the good performance of the proposed sliding mode controller. The proposed method can be used for the other DC/DC converter.

  19. Switched capacitor DC-DC converter with switch conductance modulation and Pesudo-fixed frequency control

    DEFF Research Database (Denmark)

    Larsen, Dennis Øland; Vinter, Martin; Jørgensen, Ivan Harald Holger

    A switched capacitor dc-dc converter with frequency-planned control is presented. By splitting the output stage switches in eight segments the output voltage can be regulated with a combination of switching frequency and switch conductance. This allows for switching at predetermined frequencies, 31...

  20. Spectral shaping of a randomized PWM DC-DC converter using maximum entropy probability distributions

    CSIR Research Space (South Africa)

    Dove, Albert

    2017-01-01

    Full Text Available maintaining constraints in a DC-DC converter is investigated. A probability distribution whose aim is to ensure maximal harmonic spreading and yet mainaint constraints is presented. The PDFs are determined from a direct application of the method of Maximum...

  1. Common mode noise in three-level DC-DC converters

    CSIR Research Space (South Africa)

    Grobler, Inus

    2009-09-01

    Full Text Available that three-level buck DC-DC converters in general generate much lower common mode currents than conventional two-level buck converters. Further, reductions in common mode currents are achieved by using the improved three-level topologies that have been...

  2. Y-Source Boost DC/DC Converter for Distributed Generation

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Loh, Poh Chiang; Blaabjerg, Frede

    2015-01-01

    This paper introduces a versatile Y-source boost dc/dc converter intended for distributed power generation, where high gain is often demanded. The proposed converter uses a Y-source impedance network realized with a tightly coupled three-winding inductor for high voltage boosting that is presently...

  3. Experimental study of dynamic behaviors and routes to chaos in DC-DC boost converters

    International Nuclear Information System (INIS)

    Cafagna, D.; Grassi, G.

    2005-01-01

    This paper illustrates an experimental study of a current-programmed DC-DC boost converter, with the aim of investigating possible pathways through which the converter may enter chaos. In particular, based on experimental measurements, it is shown that variations of input voltage and reference current can generate periodic, subharmonic, quasi-periodic and chaotic behaviors

  4. Magnetically integrated high step-up resonant DC-DC converter for distributed photovoltaic systems

    DEFF Research Database (Denmark)

    Vinnikov, Dmitri; Chub, Andrii; Liivik, Elizaveta

    2017-01-01

    In this paper magnetically integrated resonant single-switch quasi-Z-source DC-DC converter is evaluated as a candidate topology for the low-cost photovoltaic microconverter. The derivation of the topology and its basic operation principle are explained. Generalized design guidelines...

  5. Quasiperiodicity and Torus Breakdown in a Power Electronic DC/DC Converter

    DEFF Research Database (Denmark)

    Zhusubaliyev, Zhanybai; Soukhoterin, Evgeniy; Mosekilde, Erik

    2007-01-01

    This paper discusses the mechanisms of torus formation and torus destruction in a dc/dc converter with relay control and hysteresis. We establish a chart of the dynamical modes in the input voltage versus load resistance parameter plane. This chart displays several different torus bifurcations...

  6. A DC-DC Converter with Wide Input Voltage Range for Fuel Cell and Supercapacitor Application

    DEFF Research Database (Denmark)

    Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael Andreas E.

    2009-01-01

    This paper proposes a novel phase-shift plus duty cycle controlled hybrid bi-directional DC-DC converter based on fuel cells and supercapacitors. The described converter employs two high frequency transformers to couple the half-bridge and full-bridge circuits together in the primary side...

  7. Modelling, Simulation and Construction of a DC/DC Boost Power Converter: A School Experimental System

    Science.gov (United States)

    Silva-Ortigoza, R.; Silva-Ortigoza, G.; Hernandez-Guzman, V. M.; Saldana-Gonzalez, G.; Marcelino-Aranda, M.; Marciano-Melchor, M.

    2012-01-01

    We introduce a dc/dc boost power converter as a didactic prototype intended to support courses on electric circuit analysis experimentally. The corresponding mathematical model is obtained, the converter is designed and an experimental setup is described, constructed and tested. Simplicity of construction as well as low cost of components renders…

  8. High-power three-port three-phase bidirectional DC-DC converter

    NARCIS (Netherlands)

    Tao, H.; Duarte, J.L.; Hendrix, M.A.M.

    2007-01-01

    This paper proposes a three-port three-phase bidirectional dc-dc converter suitable for high-power applications. The converter combines a slow primary source and a fast storage to power a common load (e.g., an inverter). Since this type of system is gaining popularity in sustainable energy

  9. Floating high step-down stacked dc-dc converter based on buck-boost cells

    NARCIS (Netherlands)

    Tibola, G.; Duarte, J.L.; Blinov, A.

    2015-01-01

    In some high power dc-dc applications, where high voltage is present, a converter with high step-down ratio is required in order to provide an isolated low power auxiliary supply. This requirement represents a challenge and many topologies are currently being researched. The analysis of a

  10. Magnetically coupled high-gain Y-source isolated DC/DC converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Loh, Poh Chiang; Blaabjerg, Frede

    2014-01-01

    A new form of magnetically coupled DC/DC converter is proposed for medium power applications (250 W to 2 kW), requiring a high-voltage gain, short inductive charging time and galvanic isolation. The proposed converter can be realised using a unique Y-source impedance network and a two-switch push...

  11. Modelling, simulation and construction of a dc/dc boost power converter: a school experimental system

    International Nuclear Information System (INIS)

    Silva-Ortigoza, R; Marciano-Melchor, M; Silva-Ortigoza, G; Hernández-Guzmán, V M; Saldaña-González, G; Marcelino-Aranda, M

    2012-01-01

    We introduce a dc/dc boost power converter as a didactic prototype intended to support courses on electric circuit analysis experimentally. The corresponding mathematical model is obtained, the converter is designed and an experimental setup is described, constructed and tested. Simplicity of construction as well as low cost of components renders the feasible introduction of this equipment in undergraduate laboratories. (paper)

  12. Comparative evaluation of bidirectional dual active bridge DC-DC converter variants

    NARCIS (Netherlands)

    Sfakianakis, G.; Everts, J.; Huisman, H.; Lomonova, E.A.

    2016-01-01

    For the realization of DC-DC converters in automotive industry, the Dual Active Bridge (DAB) converter seems to be a promising choice because of its soft-switching and high-power-density capability. Contrary to the traditional 3 level - 3 level (3-3L) DAB, a 3 level - 5 level (3-5L) DAB can operate

  13. A Novel Single Switch Transformerless Quadratic DC/DC Buck-Boost Converter

    DEFF Research Database (Denmark)

    Mostaan, Ali; A. Gorji, Saman; N. Soltani, Mohsen

    2017-01-01

    A novel quadratic buck-boost DC/DC converter is presented in this study. The proposed converter utilizes only one active switch and can step-up/down the input voltage, while the existing single switch quadratic buck/boost converters can only work in step-up or step-down mode. First, the proposed ...

  14. Single Event Burnout in DC-DC Converters for the LHC Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Claudio H. Rivetta et al.

    2001-09-24

    High voltage transistors in DC-DC converters are prone to catastrophic Single Event Burnout in the LHC radiation environment. This paper presents a systematic methodology to analyze single event effects sensitivity in converters and proposes solutions based on de-rating input voltage and output current or voltage.

  15. Design and Implementation of Digital Current Mode Controller for DC-DC Converters

    DEFF Research Database (Denmark)

    Taeed, Fazel

    to be regulated by a closed-loop controller. The Peak Current Mode Control (PCMC) is one of the most promising control methods for dc-dc converters. It has been known for high bandwidth (speed), and inherent current protection. Increasing the controller bandwidth decreases the output filter size and cost. Analog...

  16. Selection of DC/DC converter for offshore wind farms with MVDC power collection

    DEFF Research Database (Denmark)

    Dincan, Catalin Gabriel; Kjær, Philip Carne; Chen, Yu-Hsing

    2017-01-01

    Four DC/DC converters are analyzed and compared with respects to availability, efficiency, ratings, repair costs and power density. Intended application is offshore wind farms with MVDC power collection. The selected topology is a new series resonant converter, which offers 99% efficiency across...

  17. Area-Efficiency Trade-Offs in Integrated Switched-Capacitor DC-DC Converters

    DEFF Research Database (Denmark)

    Spliid, Frederik Monrad; Larsen, Dennis Øland; Knott, Arnold

    2016-01-01

    This paper analyzes the relationship between efficiency and chip area in a fully integrated switched capacitor voltage divider dc-dc converter implemented in 180nm-technology and a 1/2 topology. A numerical algorithm for choosing the optimal sizes of individual components, in terms of power loss...

  18. Research on Two-channel Interleaved Two-stage Paralleled Buck DC-DC Converter for Plasma Cutting Power Supply

    DEFF Research Database (Denmark)

    Yang, Xi-jun; Qu, Hao; Yao, Chen

    2014-01-01

    As for high power plasma power supply, due to high efficiency and flexibility, multi-channel interleaved multi-stage paralleled Buck DC-DC Converter becomes the first choice. In the paper, two-channel interleaved two- stage paralleled Buck DC-DC Converter powered by three-phase AC power supply...

  19. Pulsed dc self-sustained magnetron sputtering

    International Nuclear Information System (INIS)

    Wiatrowski, A.; Posadowski, W. M.; Radzimski, Z. J.

    2008-01-01

    The magnetron sputtering has become one of the commonly used techniques for industrial deposition of thin films and coatings due to its simplicity and reliability. At standard magnetron sputtering conditions (argon pressure of ∼0.5 Pa) inert gas particles (necessary to sustain discharge) are often entrapped in the deposited films. Inert gas contamination can be eliminated during the self-sustained magnetron sputtering (SSS) process, where the presence of the inert gas is not a necessary requirement. Moreover the SSS process that is possible due to the high degree of ionization of the sputtered material also gives a unique condition during the transport of sputtered particles to the substrate. So far it has been shown that the self-sustained mode of magnetron operation can be obtained using dc powering (dc-SSS) only. The main disadvantage of the dc-SSS process is its instability related to random arc formation. In such case the discharge has to be temporarily extinguished to prevent damaging both the magnetron source and power supply. The authors postulate that pulsed powering could protect the SSS process against arcs, similarly to reactive pulsed magnetron deposition processes of insulating thin films. To put this concept into practice, (i) the high enough plasma density has to be achieved and (ii) the type of pulsed powering has to be chosen taking plasma dynamics into account. In this article results of pulsed dc self-sustained magnetron sputtering (pulsed dc-SSS) are presented. The planar magnetron equipped with a 50 mm diameter and 6 mm thick copper target was used during the experiments. The maximum target power was about 11 kW, which corresponded to the target power density of ∼560 W/cm 2 . The magnetron operation was investigated as a function of pulse frequency (20-100 kHz) and pulse duty factor (50%-90%). The discharge (argon) extinction pressure level was determined for these conditions. The plasma emission spectra (400-410 nm range) and deposition

  20. Modeling, Control and Protection of Low-Voltage DC Microgrids

    OpenAIRE

    Salomonsson, Daniel

    2008-01-01

    Current trends in electric power consumption indicate an increasing use of dc in end-user equipment, such as computers and other electronic appliances used in households and offices. With a dc power system, ac/dc conversion within these loads can be avoided, and losses reduced. AC/DC conversion is instead centralized, and by using efficient, fully controllable power-electronic interfaces, high power quality for both ac and dc systems during steady state and ac grid disturbances can be obtaine...

  1. Operation and control of a DC-grid offshore wind farm under DC transmission system faults

    DEFF Research Database (Denmark)

    Deng, Fujin; Chen, Zhe

    2013-01-01

    . Consequently, the protection and control strategies of dc systems need to be established. This paper studies a dc-grid offshore wind farm, where the wind power collection system and power transmission system adopt dc technology. In this paper, the redundancy of the HVDC transmission system under faults...... is studied, and a fault ridethrough strategy for the dc-grid offshore wind farm is proposed. The proposed strategy can effectively minimize the impacts of the power transmission system disturbance on the offshore wind farm, and on the ac grid. A dc-grid offshore wind farm example is simulated with PSCAD....../EMTDC, and the results validate the feasibility of the presented redundancy configuration and operation approach, and the fault ridethrough control strategy....

  2. A suitable model plant for control of the set fuel cell-DC/DC converter

    Energy Technology Data Exchange (ETDEWEB)

    Andujar, J.M.; Segura, F.; Vasallo, M.J. [Departamento de Ingenieria Electronica, Sistemas Informaticos y Automatica, E.P.S. La Rabida, Universidad de Huelva, Ctra. Huelva - Palos de la Frontera, S/N, 21819 La Rabida - Palos de la Frontera Huelva (Spain)

    2008-04-15

    In this work a state and transfer function model of the set made up of a proton exchange membrane (PEM) fuel cell and a DC/DC converter is developed. The set is modelled as a plant controlled by the converter duty cycle. In addition to allow setting the plant operating point at any point of its characteristic curve (two interesting points are maximum efficiency and maximum power points), this approach also allows the connection of the fuel cell to other energy generation and storage devices, given that, as they all usually share a single DC bus, a thorough control of the interconnected devices is required. First, the state and transfer function models of the fuel cell and the converter are obtained. Then, both models are related in order to achieve the fuel cell+DC/DC converter set (plant) model. The results of the theoretical developments are validated by simulation on a real fuel cell model. (author)

  3. Analysis of DC/DC Converter Efficiency for Energy Storage System Based on Bidirectional Fuel Cells

    DEFF Research Database (Denmark)

    Pittini, Riccardo; Zhang, Zhe; Andersen, Michael A. E.

    2013-01-01

    interface to the grid. In power electronics, the converter efficiency is characterized at fixed operating voltage for various output power. This type of characterization is not suitable for fuel cells, since as the power from the fuel cell increases, the cell voltage decreases. This paper analyses how......Renewable energy sources are fluctuating depending on the availability of the energy source. For this reason, energy storage is becoming more important and bidirectional fuel cells represent an attractive technology. Fuel cells require highcurrent low-voltage dc-dc or dc-ac converters as power...... the fuel cell I-V characteristics influences the power electronics converter efficiency and their consequence on the overall system. A loaddependent efficiency curve is presented based on experimental results from a 6 kW dc-dc converter prototype including the most suitable control strategy which maximizes...

  4. Perancangan dan Analisis Redistribution Routing Protocol OSPF dan EIGRP

    Directory of Open Access Journals (Sweden)

    DWI ARYANTA

    2016-02-01

    Full Text Available Abstrak OSPF (Open Shortest Path First dan EIGRP (Enhanced Interior Gateway Routing Protocol adalah dua routing protokol yang banyak digunakan dalam jaringan komputer. Perbedaan karakteristik antar routing protokol menimbulkan masalah dalam pengiriman paket data. Teknik redistribution adalah solusi untuk melakukan komunikasi antar routing protokol. Dengan menggunakan software Cisco Packet Tracer 5.3 pada penelitian ini dibuat simulasi OSPF dan EIGRP yang dihubungkan oleh teknik redistribution, kemudian dibandingkan kualitasnya dengan single routing protokol EIGRP dan OSPF. Parameter pengujian dalam penelitian ini adalah nilai time delay dan trace route. Nilai trace route berdasarkan perhitungan langsung cost dan metric dibandingkan dengan hasil simulasi. Hasilnya dapat dilakukan proses redistribution OSPF dan EIGRP. Nilai delay redistribution lebih baik 1% dibanding OSPF dan 2-3% di bawah EIGRP tergantung kepadatan traffic. Dalam perhitungan trace route redistribution dilakukan 2 perhitungan, yaitu cost untuk area OSPF dan metric pada area EIGRP. Pengambilan jalur utama dan alternatif pengiriman paket berdasarkan nilai cost dan metric yang terkecil, hal ini terbukti berdasarkan perhitungan dan simulasi. Kata kunci: OSPF, EIGRP, Redistribution, Delay, Cost, Metric. Abstract OSPF (Open Shortest Path First and EIGRP (Enhanced Interior Gateway Routing Protocol are two routing protocols are widely used in computer networks. Differences between the characteristics of routing protocols pose a problem in the delivery of data packets. Redistribution technique is the solution for communication between routing protocols. By using the software Cisco Packet Tracer 5.3 in this study were made simulating OSPF and EIGRP redistribution linked by technique, then compared its quality with a single EIGRP and OSPF routing protocols. Testing parameters in this study is the value of the time delay and trace route. Value trace route based on direct calculation of cost

  5. Robot Beroda Perambat Dinding Berbasis Mikrokontroler ATmega 2560 Dilengkapi Kendali Nirkabel dan Penghindar Rintangan

    Directory of Open Access Journals (Sweden)

    Eko Didik Widianto

    2017-05-01

    Full Text Available This research developed a mobile wall climbing robot prototype using 4 DC motors as its driver and a suction tube. It can avoid obstacles. This robot uses Arduino Mega 2560 as its controller board. The robot's weight is 747 grams. The suction tube produces a suction force of 7.815N capable of holding the robot load in a stall vertical position using 12V of voltage. The robot able to crawl down and horizontal, but still can not climb vertically. The robot is able to receive a command of motion manually from a 2.4GHz wireless joystick. In automatic mode, the robot can avoid obstacles using the HC-SR04 proximity sensor. This research also shows the relationship between suction force and the given voltage of DC brushless motor and its throtle value. Penelitian ini mengembangkan sebuah purwarupa robot perambat dinding beroda dengan 4 buah motor DC sebagai penggerak dan sebuah tabung hisap serta dapat menghindari rintangan. Robot ini menggunakan Arduino Mega 2560 sebagai papan kontrolernya. Bobot robot adalah 747 gram. Gaya hisap dari tabung hisap sebesar 7,815N mampu menahan beban robot dalam posisi diam vertikal di tegangan 12V. Robot mampu merambat turun dan mendatar, namun masih tidak bisa naik vertikal. Robot mampu diberikan perintah gerak secara manual dari tombol joystick playstation nirkabel 2,4 GHz. Di mode otomatis, robot dapat bergerak menghindari rintangan menggunakan sensor jarak HC-SR04. Dalam penelitian ini ditunjukkan hubungan antara gaya hisap dengan nilai tegangan motor DC brushless dan nilai throtle-nya.

  6. Research borehole drilling activity for boreholes DH-18, DH-19, DC-12, DC-13, DC-14, DC-15, and deepening of existing borehole DC-7

    International Nuclear Information System (INIS)

    1979-09-01

    This report is an environmental evaluation of the impacts of proposed borehole drilling activities at the Hanford Site, northwest of Richland, Washington. The proposed action is to drill six research boreholes ranging in depth from 137 to 1372 meters (m) [250 to 4500 +- feet (ft)]. In addition, an existing borehole (DC-7) will be extended from 1249 to 1524 m (4099 to 5000 +- ft). The purpose of the US Department of Energy's (DOE) borehole drilling activities is to collect data on in situ rock formations that are considered potentialy suitable for nuclear waste repositories. The technical program efforts necessary to identify and qualify specific underground waste facility sites in candidate rock formations include geologic and hydrologic studies (seismicity and tectonics, rock structure and stratigraphy, lithology, etc.). Borehole drilling is an integral part of the geological studies and is essential to a thorough understanding of potentially suitable geologic formations. The purpose of the proposed drilling activities is to obtain data for evaluating Columbia River basalts that are being evaluated by the National Waste Terminal Storage (NWTS) Program to determine their suitability potential for nuclear waste repositories. Unavoidable impact to the environment is limited primarily to the clearing of land needed for access and drilling operations. Considerations exercised during site preparation, drilling, and subsequent site restoration will limit modification of the natural environment to the minimum required for accomplishment of test objectives

  7. Pengaruh Perebusan, Penggaraman Dan Penjemuran Pada Udang Dan Cumi Terhadap Pembentukan 7 Ketokolesterol

    Directory of Open Access Journals (Sweden)

    Rudi Riyanto

    2007-12-01

    Full Text Available Penelitian pengaruh perebusan, penggaraman dan penjemuran pada udang dan cumi terhadap pembentukan 7‑ketokolesterol telah dilakukan. Dalam penelitian ini, udang dan cumi masing ­masing dibagi dalam dua kelompok. Pada kelompok pertama diberikan perlakuan perebusan dalam air, dan pada kelompok kedua diberikan perlakuan perebusan dalam air garam (3% air garam untuk udang dan 20% air garam untuk cumi. Setelah perebusan, dilakukan pengeringan di bawah matahari (udang dikupas dahulu sebelum dijemur. Pengambilan sampel dilakukan saat kondisi segar, setelah direbus dan setelah dijemur. Pengamatan dilakukan terhadap kandungan 7‑ketokolesterol, kolesterol, nilai TBA, dan kadar air. Hasil penelitian menunjukkan bahwa perebusan, penggaraman dan penjemuran berpengaruh terhadap pembentukan 7‑ketokolesterol sampai konsentrasi 20,82 ppm pada udang dan 15,05 ppm pada cumi sebagai konsentrasi tertinggi produk hasil oksidasi kolesterol yang terbentuk. Penelitian ini dapat dijadikan bukti bahwa pemanasan (perebusan dan penjemuran, serta penggaraman berpengaruh dalam proses oksidasi kolesterol pada udang dan cumi.

  8. CORPORATE IDENTITY SEJARAH DAN APLIKASINYA

    Directory of Open Access Journals (Sweden)

    Christine Suharto Cenadi

    1999-01-01

    Full Text Available In the recent globalization era%2C and the developed market%2C many companies compete to attract consumers to buy their products. One of the keys to compete and survive in this developing market is by creating an image and graphic identity. This paper will discuss about corporate identity%2C image%2C its purpose and applications. Abstract in Bahasa Indonesia : Dalam era globalisasi dewasa ini%2C dan dengan berkembangnya pasar (market%2C banyak perusahaan bersaing untuk menarik perhatian konsumen untuk membeli produknya. Salah satu cara untuk bersaing dan dapat bertahan di dalam pasar yang terus berkembang ini adalah dengan menciptakan suatu image dan identitas graphic. Tulisan ini akan membahas tentang corporate identity%2C image%2C fungsi dan aplikasinya

  9. Three phase full wave dc motor decoder

    Science.gov (United States)

    Studer, P. A. (Inventor)

    1977-01-01

    A three phase decoder for dc motors is disclosed which employs an extremely simple six transistor circuit to derive six properly phased output signals for fullwave operation of dc motors. Six decoding transistors are coupled at their base-emitter junctions across a resistor network arranged in a delta configuration. Each point of the delta configuration is coupled to one of three position sensors which sense the rotational position of the motor. A second embodiment of the invention is disclosed in which photo-optical isolators are used in place of the decoding transistors.

  10. DCMF: DC & Microformats, a good marriage

    OpenAIRE

    Méndez Rodríguez, Eva María; Siches, Arnau; López, Leandro M.; Bravo, Alejandro G.

    2008-01-01

    This report introduces the Dublin Core Microformats (DCMF) project, a new way to use the DC element set within X/HTML. The DC microformats encode explicit semantic expressions in an X/HTML webpage, by using a specific list of terms for values of the attributes “rev” and “rel” for and elements, and “class” and “id” of other elements. Microformats can be easily processed by user agents and software, enabling a high level of interoperability. These characteristics are crucial for the growing n...

  11. Implementation of hierarchical control in DC microgrids

    DEFF Research Database (Denmark)

    Jin, Chi; Wang, Peng; Xiao, Jianfang

    2014-01-01

    of Technology, Singapore. The coordination control among multiple dc sources and energy storages is implemented using a novel hierarchical control technique. The bus voltage essentially acts as an indicator of supply-demand balance. A wireless control is implemented for the reliable operation of the grid....... A reasonable compromise between the maximum power harvest and effective battery management is further enhanced using the coordination control based on a central energy management system. The feasibility and effectiveness of the proposed control strategies have been tested by a dc microgrid in WERL....

  12. RF and dc desensitized electroexplosive device

    Science.gov (United States)

    Krainiak, John W.; Speaks, Paul D.; Cornett, Michael S.

    1989-07-01

    This patent application relates to electroexplosive devices (EEDs) such as detonators, blasting caps and squibs, in particular to a method and device for desensitizing EEDs to electromagnetic radiation and electrostatic charges with the added ability to desensitize the device to essentially dc currents. An insensitive electroexplosive device to electrically ignite explosive is disclosed. This device is inherently immune to radio frequency (RF) radiation, and also provides protection against dc or very low frequency RF induced by arcing. A central feature is use of zeners and capacitors to form a reactively balanced bridge circuit. When constructed in semiconductor form, as described in this application, the device is capable of incorporation in small caliber ordnance.

  13. DC Motor Drive with PFC Rectifier

    Directory of Open Access Journals (Sweden)

    Lascu Mihaela

    2008-05-01

    Full Text Available The goal of this work is to study theperformances of a hybrid controller used to controlDC Motor drive with a single-phase power factorcorrection rectifier. This study is made usingcomputer simulation (Simulink. The first part isdevoted to the control system of the DC Motors. Inthe second part, the design of the hybrid controllerwill be presented. The third part is the design ofthe fast response single-phase boost power factorcorrection rectifier. The last parts are devoted tosimulation and experimental results.

  14. Profil Sensori dan Nilai Gizi Beberapa Jenis Ikan Patin dan Hibrid Nasutus

    Directory of Open Access Journals (Sweden)

    Theresia Dwi Suryaningrum

    2010-11-01

    Full Text Available Penelitian mengenai profil sensori dan nilai gizi filet patin Siam (Pangasius hypopthalmus, Jambal (Pangasius djambal Bleeker, Pasupati, Nasutus serta hasil silangan Siam dan Nasutus (hibrid Nasutus telah dilakukan. Analisis sensori dilakukan dengan uji pembeda menyeluruh, uji pembeda atribut, uji kesukaan, dan uji rangking. Pengamatan lainnya dilakukan terhadap edible portion dan nilai gizi (proksimat dan profil asam amino. Hasil penelitian menunjukkan bahwa filet patin hibrid Nasutus lebih memiliki kesamaan warna dengan filet patin Nasutus daripada filet patin Siam. W arna daging filet patin hibrid Nasutus berbeda nyata dengan induknya yaitu patin Nasutus dan patin Siam. Panelis lebih menyukai warna filet patin hibrid Nasutus dibandingkan dengan patin Pasupati. Patin hibrid Nasutus mempunyai tekstur yang berbeda nyata dengan Nasutus dan Jambal yang kompak dan padat, tetapi mempunyai kesamaan dengan patin Siam dan Pasupati yang agak kompak dan agak padat. Berdasarkan intensitas warna, hasil uji pembeda atribut dan uji kesukaan, maka secara berturut-turut panelis menyukai filet patin Jambal, Nasutus, hibrid Nasutus, Pasupati, dan Siam. Hibrid Nasutus mempunyai edible portionpaling tinggi (49% dibandingkan dengan patin lainnya tetapi mempunyai kadar air, kadar lemak, dan kadar protein yang lebih rendah dan berbeda nyata dengan induknya (patin Siam dan Nasutus. Patin Siam mengandung asam amino esensial paling tinggi di antara berbagai jenis patin yang diteliti. Profil asam amino patin hibrid Nasutus, Jambal, Pasupati, dan Nasutus hampir sama, kecuali pada patin Siam yang mengandung glisin, leusin, isoleusin, histidin, serin, treonin, dan prolin yang lebih tinggi dibandingkan dengan patin lainnya

  15. Stability analysis of a high-step-Up DC grid-connected two-stage boost DC-DC converter

    Directory of Open Access Journals (Sweden)

    El Aroudi A.

    2014-01-01

    Full Text Available High conversion ratio switching converters are used whenever there is a need to step-up dc source voltage level to a much higher output dc voltage level such as in photovoltaic systems, telecommunications and in some medical applications. A simple solution for achieving this high conversion ratio is by cascading different stages of dc-dc boost converters. The individual converters in such a cascaded system are usually designed separately applying classical design criteria. However these criteria may not be applicable for the complete cascaded system . This paper first presents a glimpse on the bifurcation behavior that a cascade connection of two boost converters can exhibit. It is shown that the desired periodic orbit can undergo period doubling leading to subharmonic oscillations and chaotic regimes. Then, in order to simplify the analysis the second stage is considered as constant current sink and design-oriented analysis is carried out to obtain stability boundaries in the parameter space by taking into account slope interactions between the state variables in the two-different stages.

  16. MENGENALI GEJALA TINITUS DAN PENATALAKSANAANNYA

    Directory of Open Access Journals (Sweden)

    Dewi Purwita Agustini

    2016-05-01

    Full Text Available Telinga berdenging atau dikenal dalam bahasa medis sebagai tinitus, banyak dikeluhkan sebagai suatu bising atau bunyi yang muncul di kepala tanpa adanya rangsangan dari luar. Adapun keluhan yang dialami ini seperti bunyi mendengung, mendesis, menderu, atau berbagai variasi bunyi yang lain. Tinitus bukanlah penyakit atau sindroma, tapi hanya merupakan gejala yang mungkin berasal dari satu atau sejumlah kelainan. Sebetulnya suara yang terdengar oleh telinga tersebut belum tentu bersifat kelainan atau patologis. Jika orang sehat yang terbukti telinganya normal, berada dalam ruang kedap (anehoic chamber, maka ia akan dapat mendengar berbagai macam suara yang berasal dari berbagai organ tubuhnya sendiri yang memang bekerja setiap saat, contohnya: pernapasan, kontraksi jantung, dan aliran darah. Kenyataannya, dalam kehidupan sehari-hari, suasana yang memungkinkan suara fisiologis atau normal tersebut terdengar oleh seseorang sangat jarang tercipta dan bahkan dalam kamar yang sunyi di malam hari sekalipun. Hal ini dikarenakan, bunyi masking dari lingkungan dengan berintensitas bunyi sekitar 25 – 30 dB. Tinitus baru menjadi gejala jika suara organ tubuh intensitasnya melebihi bunyi masking lingkungan tadi. Tinitus kerap diderita terutama orang pada kelompok usia pertengahan dan usia tua. Menurut data statistic dari pusat kesehatan di Amerika, sekitar 32% orang dewasa pernah mengalami tinitus pada suatu saat tertentu dalam hidupnya, dan 6 % nya sangat menganggu dan cukup sulit disembuhkan. Di Inggris, 17% populasi juga memiliki masalah tinitus. Sayangnya di Indonesia belum ada data statistic yang memadai, namun berdasarkan pengalaman empiris, penderita tinitus cukup banyak dan sering ditemui di tempat praktek, klinik, maupun rumah sakit. Meski tinitus bukanlah keadaan yang membahayakan, munculnya gejala ini pada hampir kebanyakan orang sangat mengganggu dan sering mempengaruhi kualitas hidup dan pekerjaannya. Kata Kunci: Tinitus, berdenging, telinga

  17. Le CRDI dans les Philippines

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le CRDI appuie la recherche dans les. Philippines depuis 1972. Le travail qu'y ont accompli des universités et des instituts de recherche vigoureux et la participation active de la société civile ont entraîné d'importantes améliorations dans les domaines de l'agriculture, du suivi de la pauvreté et de la gestion des forêts.

  18. XML specifications DanRIS

    DEFF Research Database (Denmark)

    2009-01-01

    XML specifications for DanRIS (Danish Registration- og InformationsSystem), where the the aim is: Improved exchange of data Improved data processing Ensuring future access to all gathered data from the year 1999 until now......XML specifications for DanRIS (Danish Registration- og InformationsSystem), where the the aim is: Improved exchange of data Improved data processing Ensuring future access to all gathered data from the year 1999 until now...

  19. Ketergantungan Online Game Dan Penanganannya

    OpenAIRE

    Syahran, Ridwan

    2015-01-01

    Penelitian ini dimaksudkan untuk mengetahui perilaku yang ditimbulkan dari kecanduan bermaian online game pada siswa SMP Negeri 1 Palu yang meliputi faktor-faktor penyebab kecanduan, keadaan psikologis yang ditimbulkan dari kecanduan bermain online game dan dampak-dampak yang ditimbulkan dari kecanduan bermain online game.Pendekatan penelitian ini adalah penelitian kualitatif dengan jenis penelitian studi kasus dengan berdasarkan responden dan informan sebagai bahan sumber data. Dalam proses ...

  20. Design and modelling of high gain DC-DC converters for fuel cell hybrid electric vehicles

    Science.gov (United States)

    Elangovan, D.; Karthigeyan, V.; Subhanu, B.; Ashwin, M.; Arunkumar, G.

    2017-11-01

    Transportation (Diesel and petrol internal combustion engine vehicles) approximately contributes to 25.5% of total CO2 emission. Thus diesel and petrol engine vehicles are the most dominant contributors of CO2 emission which leads global warming which causes climate change. The problem of CO2 emission and global warming can be reduced by focusing on renewable energy vehicles. Out of the available renewable energy sources fuel cell is the only source which has reasonable efficiency and can be used in vehicles. But the main disadvantage of fuel cell is its slow response time. So energy storage systems like batteries and super capacitors are used in parallel with the fuel cell. Fuel cell is used during steady state vehicle operation while during transient conditions like starting, acceleration and braking batteries and super capacitors can supply or absorb energy. In this paper a unidirectional fuel cell DC-DC converter and bidirectional energy storage system DC-DC converter is proposed, which can interface dc sources at different voltage levels to the dc bus and also it can independently control the power flow from each energy source to the dc bus and vice versa. The proposed converters are designed and simulated using PSIM version 9.1.1 and gate pulse pattern, input and output voltage waveforms of the converters for steady state operation are studied.

  1. Homopolar dc motor and trapped flux brushless dc motor using high temperature superconductor materials

    Science.gov (United States)

    Crapo, Alan D.; Lloyd, Jerry D.

    1991-03-01

    Two motors have been designed and built for use with high-temperature superconductor (HTSC) materials. They are a homopolar dc motor that uses HTSC field windings and a brushless dc motor that uses bulk HTSC materials to trap flux in steel rotor poles. The HTSC field windings of the homopolar dc motor are designed to operate at 1000 A/sq cm in a 0.010-T field. In order to maximize torque in the homopolar dc motor, an iron magnetic circuit with small air gaps gives maximum flux for minimum Ampere turns in the field. A copper field winding version of the homopolar dc motor has been tested while waiting for 575 A turn HTSC coils. The trapped flux brushless dc motor has been built and is ready to test melt textured bulk HTSC rings that are currently being prepared. The stator of the trapped flux motor will impress a magnetic field in the steel rotor poles with warm HTSC bulk rings. The rings are then cooled to 77 K to trap the flux in the rotor. The motor can then operate as a brushless dc motor.

  2. ENERGI DAN DAMPAKNYA TERHADAP LINGKUNGAN

    Directory of Open Access Journals (Sweden)

    I Made Astra

    2010-11-01

    Full Text Available Energi dapat berubah dari satu bentuk ke bentuk yang  lainnya, perubahannya sering mempengaruhi lingkungan dan udara yang kita hirup dengan berbagai cara. Energy kimia dalam bahan bakar fosil diubah menjadi energy panas, mekanik, atau listrik melalui pembakaran dan  ini sebagai penghasil polutan terbesar. Dan dengan demikian pembangkit listrik, kendaraan bermotor, dan kompor adalah penyebab utama terjadinya polusi udara.  Polutan yang dikeluarkan biasanya dikelompokan menjadi  hidrokarbon (HC, nitrogen oksida (NOx, dan  karbon monoksida (CO. Polutan yang dihasilkan pada pembakaran fosil merupakan faktor terbesar terjadinya asap, hujan asam,  pemanasan global dan perubahan iklim.   The conversion of energy from one form to another often affects the environment and the air we breath in many ways. Pollutants are emitted as the chemical energy in fossil fuels is converten to thermal, mechanical, or electrical energy via combustion, and thus power plants, motor vehicles, and even stoves take the blame for air pollution, and  the pollutants released by the vehicles are usually grouped as hydrocarbons (HC, nitrogen oxides (NOx, and carbon monoxide (CO. Pollutans emitted during the combustion of fossil fuels are responsible for smog, acid rain, and global warming and climate change.

  3. Isolasi dan Karakterisasi Ralstonia syzygii

    Directory of Open Access Journals (Sweden)

    Yanuar Danaatmadja

    2009-07-01

    Full Text Available Ralstonia syzygii is one of important pathogens of cloves. This study was aimed at obtaining pure culture of R. syzygi from diseased plant tissue samples. The acterium was isolated from infected clove plantations in Ungaran, Central Java. It had the ability to make clove seedlings show symptoms and then die 41 days after inoculation. The reisolated bacterium also showed its ability to kill clove seedlings after 17 days. The bacterium is gram negative, able to ultilize glucose, sucrose, maltose, mannitol, sorbitol, dulcitol, and glycerol, able to hydrolyze starch, grow well at 27oC, able to catalyze and release water and oxygen from hydrogen peroxyde (H2O2 and aerobically.   Ralstonia syzygii merupakan salah satu patogen penting pada tanaman cengkeh. Penelitian ini dilakukan untuk mendapakan isolat murni R syzygii dari jaringan tanaman terinfeksi. Bakteri diisolasi dari pertanaman cengkeh sakit yang berasal dari daerah Ungaran, Jawa Tengah. Bakteri menunjukkan kemampuan untuk menyebabkan bibit tanaman cangkeh sakit dan kemudian mati 41 hsi. Bakteri hasil reisolasi juga menunjukkan kemampuannya menyebabkan sakit dan kematian pada bibit tanaman cengkeh setelah 17 hsi. Bakteri yang diperoleh bersifat gram negatif, mampu memanfaatkan glukosa, sukrosa, maltosa, manitol, sorbitol, dulsitol, dan gliserol, mampu menghidrolisis pati, tumbuh baik pada suhu 27o C, mampu mengkatalisis dan melepaskan air dan oksigen dari hydrogen peroxide (H2O2 dan bersifat aerob.

  4. Comparison of solar panel cooling system by using dc brushless fan and dc water

    International Nuclear Information System (INIS)

    Irwan, Y M; Leow, W Z; Irwanto, M; M, Fareq; Hassan, S I S; Amelia, A R; Safwati, I

    2015-01-01

    The purpose of this article is to discuss comparison of solar panel cooling system by using DC brushless fan and DC water pump. Solar photovoltaic (PV) power generation is an interesting technique to reduce non-renewable energy consumption and as a renewable energy. The temperature of PV modules increases when it absorbs solar radiation, causing a decrease in efficiency. A solar cooling system is design, construct and experimentally researched within this work. To make an effort to cool the PV module, Direct Current (DC) brushless fan and DC water pump with inlet/outlet manifold are designed for constant air movement and water flow circulation at the back side and front side of PV module representatively. Temperature sensors were installed on the PV module to detect temperature of PV. PIC microcontroller was used to control the DC brushless fan and water pump for switch ON or OFF depend on the temperature of PV module automatically. The performance with and without cooling system are shown in this experiment. The PV module with DC water pump cooling system increase 3.52%, 36.27%, 38.98%in term of output voltage, output current, output power respectively. It decrease 6.36 °C compare than to PV module without DC water pump cooling system. While DC brushless fan cooling system increase 3.47%, 29.55%, 32.23%in term of output voltage, output current, and output power respectively. It decrease 6.1 °C compare than to PV module without DC brushless fan cooling system. The efficiency of PV module with cooling system was increasing compared to PV module without cooling system; this is because the ambient temperature dropped significantly. The higher efficiency of PV cell, the payback period of the system can be shorted and the lifespan of PV module can also be longer. (paper)

  5. Transition towards DC micro grids: From an AC to a hybrid AC and DC energy infrastructure

    Directory of Open Access Journals (Sweden)

    Evi Ploumpidou

    2017-12-01

    Full Text Available Our electricity is predominantly powered by alternating current (AC, ever since the War of Currents ended in the favor of Nicola Tesla at the end of the 19th century. However, lots of the appliances we use, such as electronics and lights with light-emitting diode (LED technology, work internally on direct current (DC and it is projected that the number of these appliances will increase in the near future. Another contributor to the increase in DC consumption is the ongoing electrification of mobility (Electric Vehicles (EVs. At the same time, photovoltaics (PV generate DC voltages, while the most common storage technologies also use DC. In order to integrate all these appliances and technologies to the existing AC grid, there is a need for converters which introduce power losses. By distributing DC power to DC devices instead of converting it to AC first, it is possible to avoid substantial energy losses that occur every time electricity is converted. This situation initiated the concept for the implementation of the DC-Flexhouse project. A prototype DC installation will be developed and tested in one of the buildings of the developing living lab area called the District of Tomorrow (De Wijk van Morgen which is located in Heerlen, the Netherlands. A neighborhood cooperative (Vrieheide cooperatie is also part of the consortium in order to address the aspect of social acceptance. Although DC seems to be a promising solution for a more sustainable energy system, the business case is still debatable due to both technology- and market-related challenges. The current energy infrastructure is predominantly based on AC, manufacturers produce devices based on AC standards and people are using many AC products across a long life span. This Smart Energy Buildings & Cities (SEB&C PDEng project is a contribution to the DC-Flexhouse project. The aim is to analyze the challenges in the transition to DC micro grids, assess the market potential of DC

  6. Properties of DLC coatings deposited by dc and dc with superimposed pulsed vacuum arc

    International Nuclear Information System (INIS)

    Zavaleyev, V.; Walkowicz, J.; Aksyonov, D.S.; Luchaninov, A.A.; Reshetnyak, E.N.; Strel'nitskij, V.E.

    2014-01-01

    Comparative studies of the structure, mechanical and tribological properties of DLC coatings deposited in DC and DC with superimposed high current pulse modes of operation vacuum-arc plasma source with the graphite cathode are presented. Imposition the pulses of high current on DC vacuum-arc discharge allows both increase the deposition rate of DLC coating and reduce the residual compressive stress in the coatings what promotes substantial improvement the adhesion to the substrate. Effect of vacuum arc plasma filtration with Venetian blind filter on the deposition rate and tribological characteristics of the coatings analyzed.

  7. Hierarchical Control for Multiple DC-Microgrids Clusters

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Dragicevic, Tomislav; Vasquez, Juan Carlos

    2014-01-01

    DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed in this p......DC microgrids (MGs) have gained research interest during the recent years because of many potential advantages as compared to the ac system. To ensure reliable operation of a low-voltage dc MG as well as its intelligent operation with the other DC MGs, a hierarchical control is proposed...

  8. Modeling and simulation for micro DC motor based on simulink

    Science.gov (United States)

    Shen, Hanxin; Lei, Qiao; Chen, Wenxiang

    2017-09-01

    The micro DC motor has a large market demand but there is a lack of theoretical research for it. Through detailed analysis of the commutation process of micro DC motor commutator, based on micro DC motor electromagnetic torque equation and mechanical torque equation, with the help of Simulink toolkit, a triangle connection micro DC motor simulation model is established. By using the model, a sample micro DC motor are simulated, and an experimental measurements has been carried on the sample micro DC motor. It is found that the simulation results are consistent with theoretical analysis and experimental results.

  9. Power Quality in DC Power Distribution Systems and Microgrids

    Directory of Open Access Journals (Sweden)

    Stephen Whaite

    2015-05-01

    Full Text Available This review paper discusses power quality considerations for direct current (DC electric power distribution systems, particularly DC microgrids. First, four selected sample DC architectures are discussed to provide motivation for the consideration of power quality in DC systems. Second, a brief overview of power quality challenges in conventional alternating current (AC distribution systems is given to establish the field of power quality. Finally, a survey of literature addressing power quality issues in DC systems is presented, and necessary power quality considerations in DC distribution system design and operation are discussed.

  10. Halbach array DC motor/generator

    Science.gov (United States)

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  11. Double-barrier junction based dc SQUID

    NARCIS (Netherlands)

    Bartolomé, M.E.; Brinkman, Alexander; Flokstra, Jakob; Golubov, Alexandre Avraamovitch; Rogalla, Horst

    2000-01-01

    dc SQUIDs based on double-barrier Nb/Al/AlOx/Al/AlOx/Al/Nb junctions (DBSQs) have been fabricated and tested for the first time. The current–voltage curves have been measured at temperatures down to 1.4 K. The critical current, Ic, dependence on the temperature T is partially described by the

  12. What should your DC default be?

    NARCIS (Netherlands)

    Cui, J.

    2009-01-01

    As reported, most DC pension scheme participants simply follow proposed defaults, even though they have the freedom to choose. Consequently, default designs have dramatic impacts on individuals’retirement saving outcomes. Given the fact that the default design matters, this paper evaluates

  13. Hierarchical Control for Multiple DC Microgrids Clusters

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Dragicevic, Tomislav; Vasquez, Juan Carlos

    2014-01-01

    This paper presents a distributed hierarchical control framework to ensure reliable operation of dc Microgrid (MG) clusters. In this hierarchy, primary control is used to regulate the common bus voltage inside each MG locally. An adaptive droop method is proposed for this level which determines...

  14. Voltage control of DC islanded microgrids

    DEFF Research Database (Denmark)

    Tucci, Michele; Riverso, Stefano; Quintero, Juan Carlos Vasquez

    2015-01-01

    We propose a new decentralized control scheme for DC Islanded microGrids (ImGs) composed by several Distributed Generation Units (DGUs) with a general interconnection topology. Each local controller regulates to a reference value the voltage of the Point of Common Coupling (PCC...

  15. Halbach array DC motor/generator

    Science.gov (United States)

    Merritt, Bernard T.; Dreifuerst, Gary R.; Post, Richard F.

    1998-01-01

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

  16. Gravity Compensation Technique Uses Small dc Motor

    Science.gov (United States)

    Hollow, Richard

    1988-01-01

    Small dc servomotor powered by simple constant-current source and with suitable gearing used to cancel effect of gravity upon load. Lead-screw positioning system has load counterbalanced by small supplementary motor powered by constant current source. Motor lighter and more compact alternative to counterbalance. Used in variety of mechanical systems where load positioned or accelerated in vertical plane.

  17. Computerized Torque Control for Large dc Motors

    Science.gov (United States)

    Willett, Richard M.; Carroll, Michael J.; Geiger, Ronald V.

    1987-01-01

    Speed and torque ranges in generator mode extended. System of shunt resistors, electronic switches, and pulse-width modulation controls torque exerted by large, three-phase, electronically commutated dc motor. Particularly useful for motor operating in generator mode because it extends operating range to low torque and high speed.

  18. DESAIN TONGKAT ELEKTRONIK BAGI TUNANETRA BERBASIS SENSOR ULTRASONIK DAN MIKROKONTROLLER ATMEGA8535

    Directory of Open Access Journals (Sweden)

    Sutarsi Suhaeb

    2016-12-01

    Full Text Available Abstract. Stick Design Electronics For Blind And Microcontroller-Based Sensor Ultrasonic Atmega8535. The purpose of this research is to create hardware and software detection of objects with the ultrasonic sensor using a microcontroller ATMEL ATMega 8535, do the testing tool that can detect objects in the blind about people with disabilities in order to function properly. This study uses its engineering product design or direct observations, ie observations on how the microcontroller as the application process with multiple input and output devices. Performance of this electronic stick, which the system uses a microcontroller ATMega8535 this tool as a main controller and ultrasonic sensors SRF04 as measuring the distance to the obstacle or object. As a Buzzer output is used as an indicator of the voice of the beeb and DC motor as vibrator stick. Source of data derived from the results of stress measurement and observation. From the test results it can be concluded that the design of the stick electronics designed from some parts of the circuit microcontroller, a series of minimum system, module ultrasonic sensors SRF04, Buzzer, DC motors, LCD modules, series regulator and battery lipo 3 cell to detect obstacles or objects that can reached by the ultrasonic sensor, which is an electronic wand indicators such as voice sounds beeb and shakes that will be active when the ultrasonic sensors detect obstacles or objects in a certain range. From the test results it can be concluded that the electronic blind cane is quite satisfactory, since the results of comparative testing the response of electronic wand to wand blind judged from the aspect of effectiveness, convenience, safety, and excellence.Abstrak. Desain Tongkat Elektronik Bagi Tunanetra Berbasis Sensor Ultrasonik dan Mikrokontroller Atmega8535. Tujuan dari penelitian ini adalah membuat perangkat keras dan lunak pendeteksi benda dengan sensor ultrasonic menggunakan mikrokontroler ATMEL ATMega

  19. Penskalaan Butir Format Respons Pilihan dan Respons Bebas Berdasarkan Model Rasch dan Partial Credit

    OpenAIRE

    Eko Hariadi

    2007-01-01

    Penelitian melihat pengaruh jumlah parameter butir, kategori respons bebas (RB), pengaruh sampel terhadap akurasi estimasi parameter kemampuan untuk menghasilkan estimasi yang stabil dan pengaruh pembobotan butir RP dan butir RB terhadap kesalahan baku. Penelitian dalam dua tahap, simulasi menggunakan 30 kondisi dengan replikasi 50 dengan variabel panjang tes, jumlah kategori, dan jumlah parameter butir, dan analisis deskriptif, dilanjutkan penerapan penskalaan gabungan butir tipe res...

  20. Metode Sederhana dan Efektif untuk Penghitungan dan Visualisasi Tiga Dimensi (3D) Biofilm Vibriio Cholera

    OpenAIRE

    Kurniawan, Andi; Fadjar, Mohamad; Sukoso, Sukoso; Prihanto, Asep Awaludin

    2015-01-01

    Mikroorganisme yang mampu menghasilkan biofim menimbulkan masalah yang serius dalam bidang kesehatan dan pangan. Penelitian biofim bagi sebagian peneliti sangat identik dengan kerumitan proses penghitungan dan visualisasi penutupan permukaan substrat penempelan bakteri. Penelitian ini ditujukan untuk mengetahui efiiensi metode alternatif untuk menghitung dan memvisualisasikan biofimVibrio cholera. Pada penelitian ini beberapa faktor lingkungan seperti pH, suhu, dan kondisi kultur diujicobakan...

  1. Studi Eksperimental dan Pemodelan Matematika Proses Pengeringan Kakao Dengan Energi Surya Secara Intermitten

    Directory of Open Access Journals (Sweden)

    Haznam Putra

    2014-06-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In this research, the behaviors of cocoa drying using solar dryers have been studied. Cocoa was taken from plantation area around North Sumatra - Indonesia. Solar energy is used as a source of energy that save and clean for drying. Cocoa is a mainstay in Indonesian commodities, but quality of the current generated is relatively low. The aims of this research to gain the quality with mathematical modelling of drying by producing a good quality of cocoa. Preparation phase started from cocoa fermentation process. With some testing times, it was taken one test where the results of fermented cocoa that had been washed and dried from water content 55.83% to 7.01%, which lasted for three days, 22 to 24 April 2013 from at 7:00 to 17:00 pm (intermittent. The study was conducted at the Solar Energy Laboratory, Faculty of Engineering Department of Mechanical Engineering of North Sumatra University Medan. It is located in Medan city with the position of 3.36 ° N - 98.4 ° E, altitude 200 meters above sea level and meridian time (GMT +7. From the experimental results obtained an experimental equation mathematical model for intermittent drying of cocoa, with the value of diffusivity coefficient was between 1.39 x10-10 to 1.85 x10-10 m2/sec, besides the quality of the dried cocoa in this study was better in colour and not moldy than dried cacao directly under the sun. ABSTRAK Pada penelitian ini, perilaku pengeringan menggunakan pengering kakao tenaga surya telah dilakukan. Kakao diambil dari perkebunan di sekitar daerah Sumatera Utara – Indonesia. Energi surya digunakan sebagai sumber energi pengeringan yang hemat dan bersih. Kakao merupakan komoditi andalan di Indonesia hanya saja mutu yang saat ini dihasilkan masih terbilang rendah. Penelitian ini bertujuan mendapatkan persamaan pengeringan dengan pemodelan matematika untuk menghasilkan mutu kakao yang baik. Tahap preparasi

  2. DC photoemission electron guns as ERL sources

    International Nuclear Information System (INIS)

    Sinclair, Charles K.

    2006-01-01

    Very-high-voltage DC electron guns, delivering moderate duration bunches from photoemission cathodes, and followed by conventional drift bunching and acceleration, offer a practical solution for an ERL injector. In a variant of this scheme, a DC gun is placed in close proximity to a superconducting RF accelerator cavity, with few or no active elements between the gun and cavity. The principal technical challenge with such electron guns arises from field emission from the cathode electrode and its support structure. Field emission may result in voltage breakdown across the cathode-anode gap, or a punch-through failure of the insulator holding off the cathode potential, as well as lesser though still serious problems. Various means to mitigate these problems are described. The operational lifetime of high quantum efficiency photocathodes in these guns is determined by the vacuum conditions, through phenomena such as chemical poisoning and ion back-bombardment. Minimization of the field strength on electrode structures pushes high-voltage DC guns toward large dimensions and, correspondingly, large outgassing loads, but it is also true that these guns offer many opportunities for achieving excellent vacuum conditions. Good solutions to vacuum problems that had previously limited cathode lifetime have been demonstrated in recent years. Designs for DC guns presently in use and planned for the near future will be described. The parameters necessary for a 100 mA average current, very-high-voltage DC gun with a photocathode operational lifetime greater than 100 h appear to be within reach, but have yet to be demonstrated. A 1 A average current source with good cathode operational lifetime will require developments beyond the present state-of-the-art

  3. Current Mode Control for LLC Series Resonant DC-to-DC Converters

    Directory of Open Access Journals (Sweden)

    Jinhaeng Jang

    2015-06-01

    Full Text Available Conventional voltage mode control only offers limited performance for LLC series resonant DC-to-DC converters experiencing wide variations in operational conditions. When the existing voltage mode control is employed, the closed-loop performance of the converter is directly affected by unavoidable changes in power stage dynamics. Thus, a specific control design optimized at one particular operating point could become unacceptable when the operational condition is varied. This paper presents a new current mode control scheme which could consistently provide good closed-loop performance for LLC resonant converters for the entire operational range. The proposed control scheme employs an additional feedback from the current of the resonant tank network to overcome the limitation of the existing voltage mode control. The superiority of the proposed current mode control over the conventional voltage mode control is verified using an experimental 150 W LLC series resonant DC-to-DC converter.

  4. DC-DC power converter research for Orbiter/Station power exchange

    Science.gov (United States)

    Ehsani, M.

    1993-01-01

    This project was to produce innovative DC-DC power converter concepts which are appropriate for the power exchange between the Orbiter and the Space Station Freedom (SSF). The new converters must interface three regulated power buses on SSF, which are at different voltages, with three fuel cell power buses on the Orbiter which can be at different voltages and should be tracked independently. Power exchange is to be bi-directional between the SSF and the Orbiter. The new converters must satisfy the above operational requirements with better weight, volume, efficiency, and reliability than is available from the present conventional technology. Two families of zero current DC-DC converters were developed and successfully adapted to this application. Most of the converters developed are new and are presented.

  5. Differential Mode EMI Filter Design for Isolated DC-DC Boost Converter

    DEFF Research Database (Denmark)

    Makda, Ishtiyaq Ahmed; Nymand, Morten

    2014-01-01

    A Differential Mode EMI filter for a low input voltage high-current isolated dc-dc boost converter is designed and presented in this paper. The primary side Differential Mode noise voltage is low due to the high transformer turn ratio, however, the input current is very high and since the EMI limit...... also does not change for such converters, it requires greatly optimized design approach for the filter including the correct sizing of the filter components. A complete analytical filter design process is carried out such a way that the Differential Mode noise voltage source in the converter...... is identified first. The DM noise model is then established and based on the harmonic analysis of the noise source voltage waveform, the complete Differential Mode EMI filter, including the filter resonance damping branch, is designed for a 3kW isolated dc-dc boost converter. The noise model and its theoretical...

  6. Multi-level cascaded DC/DC converters for PV applications

    Directory of Open Access Journals (Sweden)

    Ahmed A.A. Hafez

    2015-12-01

    Full Text Available A robust multi-level cascaded DC/DC system for Photovoltaic (PV application is advised in this article. There are three PV generators, each is coupled to a half-bridge buck cell. Each PV-generator–buck-converter channel is controlled such that maximum power is captured independently under different irradiation and temperature levels. The system operation under normal and abnormal conditions was comprehensively investigated. Internal Model Control (IMC technique was adopted for tuning the controllers. An elaborate switching modulation strategy was used to reduce the current ripple and inductor size, while maintaining high efficiency. Annotative, simple and robust remedial strategies were proposed to mitigate different anticipated faults. Comprehensive simulation results in Matlab environment were illustrated for corroborating the performance of the advised cascaded DC/DC system under normal/abnormal conditions. The proposed system enjoys the merits of independency, reduced volumetric dimensions and improved efficiency. Furthermore, the system is inherently fault-tolerant.

  7. High Voltage Coil Current Sensor for DC-DC Converters Employing DDCC

    Directory of Open Access Journals (Sweden)

    M. Drinovsky

    2015-12-01

    Full Text Available Current sensor is an integral part of every switching converter. It is used for over-current protection, regulation and in case of multiphase converters for balancing. A new high voltage current sensor for coil-based current sensing in DC-DC converters is presented. The sensor employs DDCC with high voltage input stage and gain trimming. The circuit has been simulated and implemented in 0.35 um BCD technology as part of a multiphase DC-DC converter where its function has been verified. The circuit is able to sustain common mode voltage on the input up to 40 V, it occupies 0.387*0.345 mm2 and consumes 3.2 mW typically.

  8. Analysis of the Coupling Behavior of PEM Fuel Cells and DC-DC Converters

    Directory of Open Access Journals (Sweden)

    Achim Kienle

    2009-03-01

    Full Text Available The connection between PEM fuel cells and common DC-DC converters is examined. The analysis is model-based and done for boost, buck and buck-boost converters. In a first step, the effect of the converter ripples upon the PEM fuel cell is shown. They introduce oscillations in the fuel cell. Their appearance is explained, discussed and possibilities for their suppression are given. After that, the overall behaviors of the coupled fuel cell-converter systems are analyzed. It is shown, that neither stationary multiplicities nor oscillations can be introduced by the couplings and therefore separate control approaches for both the PEMFC and the DC-DC converters are applicable.

  9. Integrated Three-Port DC-DC Converter for Photovoltaic (PV) Battery Stand-alone Systems

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Andersen, Michael A. E.

    2016-01-01

    of solar energy. Moreover, a novel transformer configuration enables variable turns ratio controlled by the phase between the two current excitations subjected to the primary windings, allowing a wider input/output range. 1 kW experimental prototype has been built to demonstrate a wellmanaged power flow......Several power sources such as PV solar arrays and battery are often used to manage the power flow for a photovoltaic (PV) based stand-alone power system due to the fluctuation nature of solar energy resource, and deliver a continuous power to the users in an appropriate form. Traditionally, three...... different single-input single-output (SISO) dc/dc converters would have been used. To reduce the cost and improve the power density of the system, an integrated three-port isolated dc/dc converter is proposed in this paper. It can realize all functions of the energy delivery due to the fluctuation nature...

  10. single-phase dc phase dc-ac boost converter ac boost converter

    African Journals Online (AJOL)

    User

    systems, need to step-up the DC input voltage. increase the ... design also makes for extra parts, greater system and weight, [1-3]. ... proposes a new design for high performance sin ... SYSTEM ANALYSIS. 2. ..... from the simulation study.

  11. Y-source impedance-network-based isolated boost DC/DC converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Town, Graham; Loh, Poh Chiang

    2014-01-01

    A dc-dc converter with very high voltage gain is proposed in this paper for any medium-power application requiring a high voltage boost with galvanic isolation. The proposed converter topology can be realized using only two switches. With this topology a very high voltage boost can be achieved even...... with a relatively low duty cycle of the switches, and the gain obtainable is presently not matched by any existing impedance network based converter operated at the same duty ratio. The proposed converter has a Y-source impedance network to boost the voltage at the intermediate dc-link side and a push......-pull transformer for square-wave AC inversion and isolation. The voltage-doubler rectifier provides a constant dc voltage at the output stage. A theoretical analysis of the converter is presented, supported by simulation and experimental results. A 250 W down-scaled prototype was implemented in the laboratory...

  12. SUBCONTRACT REPORT: DC-DC Converter for Fuel Cell and Hybrid Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Marlino, Laura D [ORNL; Zhu, Lizhi [Ballard Power Systems/Siemens VDO

    2007-07-01

    The goal of this project is to develop and fabricate a 5kW dc-dc converter with a baseline 14V output capability for fuel cell and hybrid vehicles. The major objectives for this dc-dc converter technology are to meet: Higher efficiency (92%); High coolant temperature,e capability (105 C); High reliability (15 Years/150,000miles); Smaller volume (5L); Lower weight (6kg); and Lower cost ($75/kW). The key technical challenge for these converters is the 105 C coolant temperatures. The power switches and magnetics must be designed to sustain these operating temperatures reliably, without a large cost/mass/volume penalty.

  13. Washington DC Metropolitan Area Drug Study Household and Non-Household Populations (DC-MADSH-1991)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The DC Metropolitan Area Drug Study (DCMADS) was conducted in 1991, and included special analyses of homeless and transient populations and of women delivering live...

  14. Circuit description of unipolar DC-to-DC converters for APS storage ring quadrupoles and sextupoles

    International Nuclear Information System (INIS)

    McGhee, D.G.

    1993-01-01

    This paper describes the control, interlock, and power circuits for 680 unipolar switch mode DC-to-DC converters used to regulate the Advanced Photon Sources (APS's) storage ring quadrupole and sextupole magnet currents. Quadrupole current stability is ± 6x10 -5 and the sextupole current stability is ±3x10 -4 . The stability is obtained with pulse width modulation, operating at a switching frequency of 20kHz with full current switching. The converters are housed in 200 cabinets located on top of the storage ring tunnel. Raw DC power is distributed from 80 AC-to-DC power supplies, four at each of 20 locations around the storage ring. Voltages, currents, and temperatures are computer monitored and logged for the converters and magnets. All converters and magnets are water cooled with the flow and pressure monitored at the inlet and outlet of groups. Water is interlocked with the raw power supplies and not the individual converters

  15. Research of digital controlled DC/DC converter based on STC12C5410AD

    Science.gov (United States)

    Chen, Dan-Jiang; Jin, Xin; Xiao, Zhi-Hong

    2010-02-01

    In order to study application of digital control technology on DC/DC converter, principle of increment mode PID control algorithm was analyzed in the paper. Then, a SCM named STC12C5410AD was introduced with its internal resources and characteristics. The PID control algorithm can be implemented easily based on it. The output of PID control was used to change the value of a variable that is 255 times than duty cycle, and this reduced the error of calculation. The valid of the presented algorithm was verified by an experiment for a BUCK DC/DC converter. The experimental results indicated that output voltage of the BUCK converter is stable with low ripple.

  16. Washington DC Metropolitan Area Drug Study Homeless and Transient Population (DC-MADST-1991)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The DC Metropolitan Area Drug Study (DCMADS) was conducted in 1991, and included special analyses of homeless and transient populations and of women delivering live...

  17. Improvement of burst-mode control of piezoelectric transformer based DC/DC converter

    International Nuclear Information System (INIS)

    Vasic, Dejan; Liu, Yuan-Ping; Costa, François; Schwander, Denis; Wu, Wen-Jong

    2013-01-01

    Burst-mode operation is adopted sometimes in piezoelectric transformer based converters for two major purposes: (1) to achieve voltage regulation in DC/DC converters and (2) to achieve dimming control in backlight inverters. Burst-mode control enables the converter to operate at a constant switching frequency as well as to maintain good efficiency at light load conditions. However, in practice, the piezoelectric transformer cannot instantly stop vibrating in the burst-mode due to its high quality factor. The delay in the output voltage change resulting from this behavior influences the accuracy of the regulation. This paper proposes a control strategy to make the piezoelectric transformer stop more quickly so as to enhance the accuracy of burst-mode control. The proposed method only modifies the control signal of the burst-mode driving circuit. The proposed control strategy is verified by experiments in a step-down 9 W DC/DC converter. (paper)

  18. Current Mode Control for LLC Series Resonant DC-to-DC Converters

    OpenAIRE

    Jinhaeng Jang; Syam Kumar Pidaparthy; Byungcho Choi

    2015-01-01

    Conventional voltage mode control only offers limited performance for LLC series resonant DC-to-DC converters experiencing wide variations in operational conditions. When the existing voltage mode control is employed, the closed-loop performance of the converter is directly affected by unavoidable changes in power stage dynamics. Thus, a specific control design optimized at one particular operating point could become unacceptable when the operational condition is varied. This paper presents a...

  19. LPV model for PV cell and fractional control of DC/DC converter for photovoltaic systems

    OpenAIRE

    Martínez González, Rubén; Bolea Monte, Yolanda; Grau Saldes, Antoni; Martínez García, Herminio

    2011-01-01

    This paper deals with the fractional modelling of a DC-DC converter, suitable in solar-powered electrical generation systems, and the design of a fractional controller for the aforementioned switching converter. A new model for PV cells is proposed in order to obtain a linear equation for V-I characteristic via scheduling dependence of temperature and irradiance. Due to the fractional nature of the ultracapacitors this kind of controller gives a suitable and good performance. Peer Reviewed

  20. LPV model for PV cells and fractional control of DC/DC converter for photovoltaic systems

    OpenAIRE

    Martínez González, Rubén; Bolea Monte, Yolanda; Grau Saldes, Antoni; Martínez García, Herminio

    2011-01-01

    This paper deals with the fractional modelling of a DC-DC converter, suitable in solar-powered electrical generation systems, and the design of a fractional controller for the aforementioned switching converter. A new model for PV cells is proposed in order to obtain a linear equation for VI characteristic via scheduling dependence of temperature and irradiance. Due to the fractional nature of the ultracapacitors this kind of controller gives a suitable and good performance. Peer Rev...

  1. Distributed maximum power point tracking in photovoltaic applications: active bypass DC/DC converter

    Directory of Open Access Journals (Sweden)

    Carlos Andrés Ramos-Paja

    2012-01-01

    Full Text Available Se propone una estructura de desvío activo para maximizar la producción de potencia en sistemas fotovoltaicos bajo condiciones irregulares de operación, comparando su eficiencia con soluciones individuales y distribuidas basadas en convertidores DC/DC convencionales. Los análisis y simulaciones realistas demuestran las ventajas del nuevo convertidor de desvío activo sobre soluciones basadas en convertidores Boost, Buck y Buck-Boost.

  2. Soft switching bidirectional DC-DC converter for ultracapacitor-batteries interface

    International Nuclear Information System (INIS)

    Adib, Ehsan; Farzanehfard, Hosein

    2009-01-01

    In this paper a new soft switching bidirectional DC-DC converter is introduced which can be applied as the interface circuit between ultracapacitors and batteries or fuel cells. All semiconductor devices in the proposed converter are soft switched while the control circuit remains PWM. Due to achieved soft switching condition, the energy conversion through the proposed converter is highly efficient. The proposed converter is analyzed and a prototype converter is implemented. The presented experimental results confirm the theoretical analysis.

  3. Soft switching bidirectional DC-DC converter for ultracapacitor-batteries interface

    Energy Technology Data Exchange (ETDEWEB)

    Adib, Ehsan; Farzanehfard, Hosein [Dept. of Electrical and Computer Engineering, Isfahan Univ. of Technology (Iran)

    2009-12-15

    In this paper a new soft switching bidirectional DC-DC converter is introduced which can be applied as the interface circuit between ultracapacitors and batteries or fuel cells. All semiconductor devices in the proposed converter are soft switched while the control circuit remains PWM. Due to achieved soft switching condition, the energy conversion through the proposed converter is highly efficient. The proposed converter is analyzed and a prototype converter is implemented. The presented experimental results confirm the theoretical analysis. (author)

  4. Comparative efficiency evaluation of buck and hybrid buck DC-DC converters for automotive applications

    DEFF Research Database (Denmark)

    Pelan, Ovidiu; Cornea, Octavian; Muntean, Nicolae

    2014-01-01

    This paper presents and discusses design considerations and efficiency investigation of a conventional step-down and a hybrid switched-capacitor DC-DC converter. Three MOSFETs with low on-resistance have been tested for each converter in order to find the most adequate switch for this application....... The experimental results and comparative efficiency graphs were obtained with a 1kW laboratory prototype dedicated for a 42/14V dual voltage automotive system....

  5. Simulating and Testing a DC-DC Half-Bridge SLR Converter

    Science.gov (United States)

    2013-06-01

    future pulse power demands with ship power, a large bank of capacitors or similar rapid discharge source is required. If capacitors are charged...Single Pulsed Avalanche Energy (j) I" Avalanche Current (i) E,, Repetilive Avalanche Energy (i) dv/dt Peak Diode Recovery dv/dt ® Po Total Power...SLR), battery charging, DC-DC, pulse power, power electronics, SLR converter 15. NUMBER OF PAGES 119 16. PRICE CODE 17. SECURITY CLASSIFICATION

  6. Sliding-mode control of single input multiple output DC-DC converter

    Science.gov (United States)

    Zhang, Libo; Sun, Yihan; Luo, Tiejian; Wan, Qiyang

    2016-10-01

    Various voltage levels are required in the vehicle mounted power system. A conventional solution is to utilize an independent multiple output DC-DC converter whose cost is high and control scheme is complicated. In this paper, we design a novel SIMO DC-DC converter with sliding mode controller. The proposed converter can boost the voltage of a low-voltage input power source to a controllable high-voltage DC bus and middle-voltage output terminals, which endow the converter with characteristics of simple structure, low cost, and convenient control. In addition, the sliding mode control (SMC) technique applied in our converter can enhance the performances of a certain SIMO DC-DC converter topology. The high-voltage DC bus can be regarded as the main power source to the high-voltage facility of the vehicle mounted power system, and the middle-voltage output terminals can supply power to the low-voltage equipment on an automobile. In the respect of control algorithm, it is the first time to propose the SMC-PID (Proportion Integration Differentiation) control algorithm, in which the SMC algorithm is utilized and the PID control is attended to the conventional SMC algorithm. The PID control increases the dynamic ability of the SMC algorithm by establishing the corresponding SMC surface and introducing the attached integral of voltage error, which endow the sliding-control system with excellent dynamic performance. At last, we established the MATLAB/SIMULINK simulation model, tested performance of the system, and built the hardware prototype based on Digital Signal Processor (DSP). Results show that the sliding mode control is able to track a required trajectory, which has robustness against the uncertainties and disturbances.

  7. Informational model verification of ZVS Buck quasi-resonant DC-DC converter

    Science.gov (United States)

    Vakovsky, Dimiter; Hinov, Nikolay

    2016-12-01

    The aim of the paper is to create a polymorphic informational model of a ZVS Buck quasi-resonant DC-DC converter for the modeling purposes of the object. For the creation of the model is applied flexible open standards for setting, storing, publishing and exchange of data in distributed information environment. The created model is useful for creation of many and different by type variants with different configuration of the composing elements and different inner model of the examined object.

  8. Purwarupa Sistem Integrasi Quadcopter dan Mobile Robot

    OpenAIRE

    Dharmawan, Andi; Lusiarta Putera, Christian Antonia

    2012-01-01

    AbstrakQuadcopter, juga dikenal sebagai quadrotor, adalah helikopter dengan empat motor yang dilengkapi dengan  empat buah propeller pada masing-masing motornya yang digunakan untuk terbang dan bermanuver. Pada quadcopter terdapat 3 variabel sudut yang menjadi element utama dalam pengendaliannya yaitu roll, pitch, dan yaw yang diperoleh dari penggabungan sensor accelerometer, gyroscope dan magnetometer dengan metode Direction Cosine Matrix. Pada sistem integrasi mobile robot dan quadcopter, d...

  9. Review Dendrimer : Definisi, Sintesis, Aplikasi Dan Prospektif

    OpenAIRE

    Rahmi, Dwinna

    2013-01-01

    Dendrimer merupakan makrostruktur monodisperse dengan banyak cabang yang homogen dan degree of branching (DB) 100%. Dua cara sintesis dendrimer yaitu convergent dan divergent dilakukan. Convergent dilakukan dengan reaksi kovalen antara dua dan lebih monomer. Divergent dimulai dengan pembentukan inti dilanjutkan dengan pembentukan cabang yang merupakan group fungsional yang aktif. Sejauh ini dendrimer sudah banyak diterapkan pada bidang farmasi yaitu drug delivery dan non farmasi pada proses i...

  10. Rancang Bangun Aplikasi Enkripsi dan Dekripsi Email Dengan Menggunakan Algoritma Advanced Encryption Standard Dan Knapsack

    Directory of Open Access Journals (Sweden)

    Timothy John Pattiasina

    2014-07-01

    Full Text Available Advanced Encryption Standard (AES dan Knapsack adalah dua algoritma enkripsi simetris dan asimetris yang paling sering digunakan. Penelitian ini menganalisa kedua algoritma AES dan algoritma Knapsack. Prototipe aplikasi enkripsi email ini dirancang dengan menggabungkan karateristik algoritma AES dan Knapsack untuk memecahkan masalah keamanan email. Algoritma AES digunakan untuk mengenkripsi dan deskripsi email berupa teks atau file, sedangkan Algoritma Knapsack di gunakan untuk mengenkripsi kunci AES. Enkripsi hybrid yang diterapkan pada aplikasi bertujuan untuk menambah keamanan informasi dalam sebuah jaringan.

  11. ITAR Free Commercial-of-the-Shelf DC/DC Converter

    Science.gov (United States)

    Denzinger, Wolfgang; Hintze, Thomas

    2014-08-01

    A commercial-of-the-shelf (COTS) DC/DC converter for digital space equipment has been developed by ASP under ESA contract with special emphasis on low cost, no use of ITAR listed EEE parts like Mosfets, minimum number of rad-hard digital IC's and a design tolerance against single event effects by appropriate filtering. However, the intention to qualify this discrete converter design for a low cost FM series production was difficult due to the high up-sceening cost of EEE-parts with one lot guarantee and minimum-by. To overcome this problem, in a next step a redesign of the DC/DC converter was performed with all semiconductors like bipolar transistors, rectifiers and zener diodes packaged into hybrids. With this approach it was possible to buy a high number of less expensive wafers or dies from one lot, to perform a lot acceptance test and to integrate the dies into hybrid packages with further up- screening for FM use. The semiconductors have been packaged into three signal hybrids with 44 pins and one power hybrid with 24 pins for the dissipating transistors and rectifiers. The design of the hybrids is such, that all integrated semiconductors can be tested individually. The qualification of four EQM DC/DC converters with different combinations of output voltages has been successfully performed and two FM's have been manufactured and tested.

  12. Design and implementation of current fed DC-DC converter for PHEV application using renewable source

    Science.gov (United States)

    Milind Metha, Manish; Tutki, Sanjay; Rajan, Aju; Elangovan, D.; Arunkumar, G.

    2017-11-01

    As the fossil fuels are depleting day by day, the use of renewable energy sources came into existence and they evolved a lot lately. To increase efficiency and productivity in the hybrid vehicles, the existence less efficient petroleum and diesel IC engines need to be replaced with the new and efficient converters with renewable energy sources. This has to be done in such a way that impacts three factors mainly: cost, efficiency and reliability. The PHEVs that have been launched and the upcoming PHEVs using converters with voltage range around 380V to 400V generated with power ranges between 2.4KW to 2.8KW. The basic motto of this paper is to design a prolific converter while considering the factor such as cost and size. In this paper, a two stage DC-DC converter is proposed and the proposed DC-DC converter is utilized to endeavour voltage from 24V (photovoltaic source) to a yield voltage of 400V and to meet the power demand of 250W, since only one panel is being used for this proposed paper. This paper discuss in detail about why and how the current fed DC-DC converter is utilized along with a voltage doubler, thus reducing transformer turns and thereby reducing overall size of the product. Simulation and hardware results have been presented along with calculations for duty cycle required for firing sequence for different values of transformer turns.

  13. CAMEX-4 DC-8 DROPSONDE SYSTEM V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The CAMEX-4 DC-8 Dropsonde System dataset was collected by the DC-8 Dropsonde System (D8D) uses dropwindsonde and Global Positioning System (GPS) receivers to...

  14. control of a dc motor using fuzzy logic control algorithm

    African Journals Online (AJOL)

    user

    controller in the control performance of an industrial type DC motor using MATLAB. The fuzzy logic .... controlled separately excited permanent magnet DC motor (PMDC). ... When the field current is constant, the flux induced by the field ...

  15. Brushless dc motor uses electron beam switching tube as commutator

    Science.gov (United States)

    Studer, P.

    1965-01-01

    Electron beam switching tube eliminates physical contact between rotor and stator in brushless dc motor. The tube and associated circuitry control the output of a dc source to sequentially energize the motor stator windings.

  16. Trends and determinants of cycling in the Washington, DC region.

    Science.gov (United States)

    2011-01-01

    This report analyzes cycling trends, policies, and commuting in the Washington, DC area. The analysis is divided into two parts. : Part 1 focuses on cycling trends and policies in Washington (DC), Alexandria (VA), Arlington County (VA), Fairfax Count...

  17. KORELASI ANTARA ISLAM DAN EKONOMI

    Directory of Open Access Journals (Sweden)

    Akmal Zainal Abidin

    2015-03-01

    Full Text Available CORELATION BETWEEN ISLAM AND ECONOMY. This paper aims to identifies about the correlation between economic and Islam. Islam is the perfect religion that governs all things in life, including the economy. This is evident with the concept of  well-being which is described in the al-Quran and Sunnah. Basically the goal of every human life is to prosper, although humans make sense of  well- being with a different perspective. Most understand economics assume that welfare is the welfare of  earthly material. But to make sense of well-being with the term al-Falah, is meaning holistic wellbeing and balance between material and spiritual dimensions. al-Quran and Sunnah have taught that the human being will be achieved if  living in balance between material and spiritual. This is because human life does not just stop in the life of this world, but there is still a second life that will be faced by humanity in the hereafter, and well-being will be achieved with the truth is that people can balance the needs of the world and the hereafter, and that is what is taught in Islamic economics. Keywords: Islam, Economy, Prosperity. Tulisan ini bertujuan untuk menjelasakn tentang korelasi antara ekonomi  dan  Islam.  Islam  adalah  agama  yang  sempurna  yang mengatur segala hal dalam kehidupan ini, termasuk juga ekonomi. Hal ini terbukti dengan konsep kesejahteraan yang dipaparkan dalam al-Quran dan Sunnah. Pada dasarnya tujuan hidup setiap manusia adalah untuk mencapai kesejahteraan, meskipun manusia memaknai kesejahteraan dengan perspektif  yang berbeda-beda. Sebagian besar paham ekonomi menganggap bahwa kesejahteraan adalah kesejahteraan material duniawi. Namun Islam memaknai kesejahteraan dengan istilah  Falah  yang  berarti  kesejahteraan  holistik  dan  seimbang antara dimensi material dan spiritual. Al-Quran dan Sunnah telah mengajarkan bahwa kesejahteraan akan tercapai jika manusia menjalani hidup secara seimbang antara material dan

  18. Karakteristik Dan Spektrum Manajemen Pendidikan Islam

    OpenAIRE

    Jannah, Siti Raudhatul

    2013-01-01

    Artikel ini mendiskusikan mengenai manajemen pendidikan Islam, karakteristik, dan spektrumnya. Karakteristik manajemen pendidikan Islam harus didasarkan pada al-Qur'an dan Hadits serta pemikiran rasional yang telah diuji validitasnya. Spektrum manajemen pendidikan Islam meliputi lingkup manajemen personalia pendidikan Islam, manajemen peserta didik pendidikan Islam, maanjemen kurikulum pendidikan Islam, manajemen keuangan pendidikan Islam, manajemen sarana dan prasarana pendidikan Islam, mana...

  19. PRODUKSI NANOFIBER DAN APLIKASINYA DALAM PENGOLAHAN AIR

    OpenAIRE

    Krisnandika, Vania Elita

    2017-01-01

    Abstrak Kebutuhan air meningkat seiring meningkatnya jumlah penduduk dan taraf kehidupan masyarakat. Pembangunan yang dilakukan secara terus-menerus dan sangat cepat di Indonesia mengakibatkan penurunan kualitas air permukaan. Teknologi membran merupakan salah satu teknologi pengolahan air yang menghasilkan produk dengan kualitas tinggi. Membran berstruktur nano, khususnya nanofiber, saat ini menjadi perhatian karena menjawab kebutuhan teknologi filtrasi yang efektif dan hemat biaya. Pr...

  20. DETEKSI DAN MANAJEMEN REFEEDING SYNDROME

    Directory of Open Access Journals (Sweden)

    Darmadi Darmadi

    2012-09-01

    Full Text Available AbstrakRefeeding syndrome (RFS dideskripsikan sebagai perubahan biokimiawi, manifestasi klinis dan komplikasi sebagai konsekuensi pemberian nutrisi pada pasien kurang gizi. Refeeding syndrome ini menyebabkan dampak buruk dan kematian. Sindroma ini lebih sering terjadi pada kelompok risiko. Refeeding syndrome merupakan suatu sindroma yang sering tak terdiagnosis oleh karena itu perlu peningkatan pengetahuan dan kesadaran dari tenaga medis untuk mengurangi morbiditas dan mortalitas dari RFS. Karena alasan tersebut ditulis tinjauan pustaka ini yang akan membahas mengenai patofisiologi, faktor risiko, manifestasi klinis, dan manajemennya.Kata kunci : refeeding syndrome, kurang gizi, hipofosfatemia, dukungan nutrisiAbstractRefeeding syndrome (RFS describel as biochemical changes, clinical manifestations, and complications that can occur as a consequence of feeding a malnourished individual. RFS can result in serious harm and death. RFS more commonly occurs in at-risk populations. Increased awareness amongst healthcare professionals is likely to reduce morbidity and mortality. This review examines the pathophysiology, risk factors, clinical manifestations, and management of RFS.Key word : refeeding syndrome, malnourished, hypophosphatemia, nutritional support

  1. Design of an Input-Parallel Output-Parallel LLC Resonant DC-DC Converter System for DC Microgrids

    Science.gov (United States)

    Juan, Y. L.; Chen, T. R.; Chang, H. M.; Wei, S. E.

    2017-11-01

    Compared with the centralized power system, the distributed modularized power system is composed of several power modules with lower power capacity to provide a totally enough power capacity for the load demand. Therefore, the current stress of the power components in each module can then be reduced, and the flexibility of system setup is also enhanced. However, the parallel-connected power modules in the conventional system are usually controlled to equally share the power flow which would result in lower efficiency in low loading condition. In this study, a modular power conversion system for DC micro grid is developed with 48 V dc low voltage input and 380 V dc high voltage output. However, in the developed system control strategy, the numbers of power modules enabled to share the power flow is decided according to the output power at lower load demand. Finally, three 350 W power modules are constructed and parallel-connected to setup a modular power conversion system. From the experimental results, compared with the conventional system, the efficiency of the developed power system in the light loading condition is greatly improved. The modularized design of the power system can also decrease the power loss ratio to the system capacity.

  2. DC-DC Type High-Frequency Link DC for Improved Power Quality of Cascaded Multilevel Inverter

    Science.gov (United States)

    Sadikin, Muhammad; Senjyu, Tomonobu; Yona, Atsushi

    2013-06-01

    Multilevel inverters are emerging as a new breed of power converter options for power system applications. Recent advances in power switching devices enabled the suitability of multilevel inverters for high voltage and high power applications because they are connecting several devices in series without the need of component matching. Usually, a transformerless battery energy storage system, based on a cascaded multilevel inverter, is used as a measure for voltage and frequency deviations. System can be reduced in size, weight, and cost of energy storage system. High-frequency link circuit topology is advantageous in realizing compact and light-weight power converters for uninterruptible power supply systems, new energy systems using photovoltaic-cells, fuel-cells and so on. This paper presents a DC-DC type high-frequency link DC (HFLDC) cascaded multilevel inverter. Each converter cell is implemented a control strategy for two H-bridge inverters that are controlled with the same multicarrier pulse width modulation (PWM) technique. The proposed cascaded multilevel inverter generates lower voltage total harmonic distortion (THD) in comparison with conventional cascaded multilevel inverter. Digital simulations are carried out using PSCAD/EMTDC to validate the performance of the proposed cascaded multilevel inverter.

  3. Islam, Media, dan Politik : Sebuah Perdebatan dan Kontempelasi Nilai Berdemokrasi

    Directory of Open Access Journals (Sweden)

    Idil Akbar

    2016-10-01

    Full Text Available Infact, press or media is one of pilar democracy. Media in democracy is a public sphere to communi-cation and makes relation, and a same time as public arena to gain information. But, media also could not release from streotypes and tendency that usually bring of interest, either the owner or ideology. It is meaning media can not released from perspective distorsion, values bias and take a side. Media also effective to become propaganda instrument for a political interest and an ideology. It is seen like how media in US, for example, stereotype of Islam in discourses contradiction and glob-al interest opposition. Then, Islam dominantly identified as doctrine teaches radicalism, fundamen-talism and terorism. Thus, it is often be justification for US to operate the military mission in the name of democracy. Tak dipungkiri pers atau media menjadi salah satu pilar bagi demokrasi. Media dalam demokrasi adalah sebagai ruang bagi publik berkomunikasi dan berinteraksi, sekaligus sarana publik mem-peroleh informasi tentang banyak hal. Namun, media juga tak bisa dilepaskan dari stereotip dan kecenderungan-kecenderungan, yang biasanya membawa kepentingan, baik pemilik maupun ide-ologi. Media karenanya tak lepas dari distorsi perspektif, bias nilai dan berpihak. Media juga efektif menjadi alat propaganda bagi sebuah kepentingan politik dan ideologi, seperti bagaimana media di negara Amerika, misalnya, menstereotipkan Islam dalam analisis pertentangan wacana dan kepent-ingan global. Sehingga, dominan Islam diidentikkan dengan sematan sebagai ajaran yang mengajarkan radikalisme, fundamentalisme dan terorisme. Karenanya pula seringkali menjadi alasan pembenar bagi Amerika untuk menjalankan misi militer atas nama demokrasi.

  4. Musisi Sekuler dan Gerejawi

    Directory of Open Access Journals (Sweden)

    Benny Cristovel

    2007-12-01

    Full Text Available Menjadi seorang musisi tidak sekedar bermain musik atau menyanyi saja. Ada jenjang-jenjang yang akan dilewatidalam dunia musik, yang pada akhirnya setiap musisi dihadapkan kepada tanggung jawab dalam dunia tersebut. Di jaman ini, jika jenjang seorang musisi sudah tahap profesional, maka musik dan bisnis merupakan hal yang tidak terpisahkan. Jadi tidak heran jika ada banyak orang yang memimpikan untuk berkarier dalam bidang musik, bahkan telah men1adicita-cita sejak kecil.Jadi penting bagi musisi gerejawi benar-benar "mengkotakkan dirinya" terhadap persepsi yang dianut oleh musisi sekuler, bukan mencampurkannya. Hal ini sangat esensial, karena musisi gerejawi bukan melayani manusia melainkan oleh anugerah Tuhan dipercayakan pekerjaan ini. Dengan demikian pelayanan sebagai musisi gerejawi tidak tercemar oleh persepsi dari dunia musik sekuler. Selain itu musisi gerejawi dapat merefleksikan Tuhan yang disembahnya kepada dunia sekuler, karena tujuan dari semua yang dilakukannya adalah untuk kemuliaan nama Tuhan.

  5. Unregulated Series Resonant Converter for Interlinking DC Nanogrids

    DEFF Research Database (Denmark)

    Tomas Manez, Kevin; Zhang, Zhe; Ouyang, Ziwei

    2017-01-01

    bidirectional converter to interlink a 400V DC bus with a 48V DC bus ispresented. The proposed converter is based on a LLC resonant converter operating as a DC transformer at a fixed frequency and duty cycle without any complex control strategy. A clearand simplified design procedure for high efficiency...

  6. Controller design and stability analysis of grid connected DC microgrid

    DEFF Research Database (Denmark)

    Chauhan, Rajeev Kumar; Chauhan, Kalpana; Guerrero, Josep M.

    2018-01-01

    DC microgrids are desired to provide the electricity for the remote areas which are far from the main grid. The microgrid gets popularity because DC power sources such as photovoltaics (PVs), battery banks, and fuel cells can be interconnected without AC/DC converters. The stochastic nature of PV...

  7. Active superconducting DC fault current limiter based on flux compensation

    International Nuclear Information System (INIS)

    Shi Jing; Tang Yuejin; Wang, Chen; Zhou Yusheng; Li Jingdong; Ren Li; Chen Shijie

    2006-01-01

    With the extensive application of DC power systems, suppression of DC fault current is an important subject that guarantees system security. This paper presents an active superconducting DC fault current limiter (DC-SFCL) based on flux compensation. The DC-SFCL is composed of two superconducting windings wound on a single iron core, the primary winding is in series with DC power system, and the second winding is connected with AC power system through a PWM converter. In normal operating state, the flux in the iron core is compensated to zero, and the SFCL has no influence on DC power system. In the case of DC system accident, through regulating the active power exchange between the SFCL's second winding and the AC power system, the current on the DC side can be limited to different level complying with the system demand. Moreover, the PWM converter that interface the DC system and AC system can be controlled as a reactive power source to supply voltage support for the AC side, which has little influence on the performance of SFCL. Using MATLAB SIMULINK, the mathematic model of the DC-SFCL is created, simulation results validate the dynamics of system, and the performance of DC-SFCL is confirmed

  8. Overvoltage protection in DC power systems; Ueberspannungsschutz in Gleichstromanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Birkl, Josef; Zahlmann, Peter [Dehn + Soehne GmbH + Co.KG, Neumarkt (Germany)

    2012-02-15

    The utilisation of DC power systems has increased dramatically in the recent years. In addition to traditional DC applications such as in telecommunications and railway engineering a variety of DC applications arise due to a rapid spread of photovoltaic systems. Current projects for the e-mobility expand the scope of application.

  9. On the modelling of linear-assisted DC-DC voltage regulators for photovoltaic solar energy systems

    Science.gov (United States)

    Martínez-García, Herminio; García-Vílchez, Encarna

    2017-11-01

    This paper shows the modelling of linear-assisted or hybrid (linear & switching) DC/DC voltage regulators. In this kind of regulators, an auxiliary linear regulator is used, which objective is to cancel the ripple at the output voltage and provide fast responses for load variations. On the other hand, a switching DC/DC converter, connected in parallel with the linear regulator, allows to supply almost the whole output current demanded by the load. The objective of this topology is to take advantage of the suitable regulation characteristics that series linear voltage regulators have, but almost achieving the high efficiency that switching DC/DC converters provide. Linear-assisted DC/DC regulators are feedback systems with potential instability. Therefore, their modelling is mandatory in order to obtain design guidelines and assure stability of the implemented power supply system.

  10. First Implementation of a Two-Stage DC-DC Conversion Powering Scheme for the CMS Phase-2 Outer Tracker

    CERN Document Server

    Feld, Lutz Werner; Karpinski, Waclaw; Klein, Katja; Lipinski, Martin; Pauls, Alexander Josef; Preuten, Marius; Rauch, Max Philip; Wangelik, Frederik; Wlochal, Michael

    2017-01-01

    The 2S silicon strip modules for the CMS Phase-2 tracker upgrade will require two operating voltages. These will be provided via a two-step DC-DC conversion powering scheme, in which one DC-DC converter delivers 2.5\\,V while the second DC-DC converter receives 2.5\\,V at its input and converts it to 1.2\\,V. The DC-DC converters will be mounted on a flex PCB, the service hybrid, together with an opto-electrical converter module (VTRx+) and a serializer (LP-GBT). The service hybrid will be mounted directly on the 2S module. A prototype service hybrid has been developed and its performance has been evaluated, including radiative and conductive noise emissions, and efficiency. In addition system tests with a prototype module have been performed. In this report the service hybrid will be described and the test results will be summarized.

  11. All Digital Switch-Mode DC/DC Converters with BIST Functionality for Harsh Space Environments, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Micro Arizona State University (ASU) team will develop an all-digitally controlled, wide temperature range point-of-load switch-mode DC-DC regulator core...

  12. DC-Voltage Fluctuation Elimination Through a DC-Capacitor Current Control for DFIG Converters Under Unbalanced Grid Voltage Conditions

    DEFF Research Database (Denmark)

    Liu, Changjin; Xu, Dehong; Zhu, Nan

    2013-01-01

    Unbalanced grid voltage causes a large second-order harmonic current in the dc-link capacitors as well as dc-voltage fluctuation, which potentially will degrade the lifespan and reliability of the capacitors in voltage source converters. This paper proposes a novel dc-capacitor current control...... method for a grid-side converter (GSC) to eliminate the negative impact of unbalanced grid voltage on the dc-capacitors. In this method, a dc-capacitor current control loop, where a negative-sequence resonant controller is used to increase the loop gain, is added to the conventional GSC current control...... loop. The rejection capability to the unbalanced grid voltage and the stability of the proposed control system are discussed. The second-order harmonic current in the dc capacitor as well as dc-voltage fluctuation is very well eliminated. Hence, the dc capacitors will be more reliable under unbalanced...

  13. Next-Generation Shipboard DC Power System

    DEFF Research Database (Denmark)

    Jin, Zheming; Sulligoi, Giorgio; Cuzner, Rob

    2016-01-01

    sources (RES) are commonly recognized as the major driven force of the revolution, the outburst of customer electronics and new kinds of household electronics is also powering this change. In this context, dc power distribution technologies have made a comeback and keep gaining a commendable increase...... in research interests and industrial applications. In addition, the concept of flexible and smart distribution has also been proposed, which tends to exploit distributed generation and pack the distributed RESs and local electrical loads as an independent and self-sustainable entity, namely microgrid....... At present, the research of dc microgrid has investigated and developed a series of advanced methods in control, management and objective-oriented optimization, which would found the technical interface enabling the future applications in multiple industrial areas, such as smart buildings, electric vehicles...

  14. Artificial noise due to DC electric trains

    International Nuclear Information System (INIS)

    Senanayake, W.E.

    1987-08-01

    The current distribution in a DC railway and the resulting magnetic effects have been modelled using the parameters of the DC railway networks in Italy. The results show that the magnetic perturbations are substantially high in the vicinity of electrified railway lines. The order of magnitude of the induced field can be as significant as ∼ 40nT at a distance of ≅ 2km from the railway line indicating that geophysical techniques that employ natural magnetic anomalies can be badly effected, within this range. The magnetic effects rapidly decay with increasing distance, but the noise level could be significant even at a range of ∼ 10km. Also, these induced anomalies vary significantly with the conductivity of the ground. When the conductivity is high it is possible that the railway currents dispersed through the ground interact with those induced in the earth, causing a severe disruption to the telluric measurements. (author). 11 refs, 10 figs, 1 tab

  15. Macroscopic quantum tunneling in a dc SQUID

    International Nuclear Information System (INIS)

    Chen, Y.C.

    1986-01-01

    The theory of macroscopic quantum tunneling is applied to a current-biased dc SQUID whose dynamics can be described by a two-dimensional mechanical system with a dissipative environment. Based on the phenomenological model proposed by Caldeira and Leggett, the dissipative environment is represented by a set of harmonic oscillators coupling to the system. After integrating out the environmental degrees of freedom, an effective Euclidean action is found for the two-dimensional system. The action is used to provide the quantum tunneling rate formalism for the dc SQUID. Under certain conditions, the tunneling rate reduces to that of a single current-biased Josephson junction with an adjustable effective critical current

  16. Universality of DC electrical conductivity from holography

    Energy Technology Data Exchange (ETDEWEB)

    Ge, Xian-Hui, E-mail: gexh@shu.edu.cn [Shanghai Key Laboratory of High Temperature Superconductors, Department of Physics, Shanghai University, Shanghai, 200444 (China); Department of Physics, University of California, San Diego, CA92122 (United States); Sin, Sang-Jin, E-mail: sjsin@hangyang.ac.kr [Department of Physics, Hanyang University, Seoul 133-791 (Korea, Republic of); Wu, Shao-Feng, E-mail: sfwu@shu.edu.cn [Department of Physics, Shanghai University, Shanghai, 200444 (China)

    2017-04-10

    We propose a universal formula of dc electrical conductivity in rotational- and translational-symmetries breaking systems via the holographic duality. This formula states that the ratio of the determinant of the dc electrical conductivities along any spatial directions to the black hole area density in zero-charge limit has a universal value. As explicit illustrations, we give several examples elucidating the validation of this formula: We construct an anisotropic black brane solution, which yields linear in temperature for the in-plane resistivity and insulating behavior for the out-of-plane resistivity; We also construct a spatially isotropic black brane solution that both the linear-T and quadratic-T contributions to the resistivity can be realized.

  17. PENGELOLAAN ZAKAT OLEH NEGARA DAN SWASTA Studi Efektifitas dan Efisiensi Pengelolaan Zakat Oleh BAZ Dan LAZ Kota Madiun

    Directory of Open Access Journals (Sweden)

    Atik Abidah

    2010-12-01

    Full Text Available Abstraks: Keberadaan lembaga zakat di Indonesia yang diakui oleh perundang-undangan ada dua, yaitu Badan Amil Zakat (BAZ dan Lembaga Amil Zakat (LAZ. BAZ adalah lembaga zakat yang dikelola oleh pemerintah, sedangkan LAZ adalah lembaga yang dikelola oleh masyarakat. Artikel ini merupakan merupakan hasil penelitian lapangan dengan menggunakan pendekatan kualitatif. Data digali langsung dari BAZ Kota Madiun dan LAZ dalam hal ini ada 2 lembaga, yaitu Lembaga Manajemen Infaq (LMI dan Baitul Maal Hidayatullah (BMH. Hasil penelitian BAZ lebih efektif dibanding LAZ, karena BAZ di bawah naungan Pemerintah Kota Madiun dan didukung dengan kebijakan dalam menjalankan progam kerjanya. Sedangkan pada LAZ (LMI dan BMH karena sifatnya mandiri, maka segala sesuatunya akan efektif jika mereka bekerja keras, dan itulah yang selama ini dilakukan oleh LMI dan BMH, sehingga sampai saat ini mereka masih eksis.

  18. INTERAKSI DAN HARMONI UMAT BERAGAMA

    Directory of Open Access Journals (Sweden)

    Joko Tri Haryanto

    2012-05-01

    Masyarakat Singkawang adalah masyarakat yang terdiri atas berbagai kelompok suku bangsa dan agama. Secara historis, masyarakat Singkawang mampu mem­pertahankan harmoni antar agama. Model interaksi sosial yang bersifat asosiatif tampaknya potensial untuk mendukung harmoni di dalam masyarakat. Ber­dasarkan paradigma fungsional-struktural, masyarakat diasumsikan sebagai sistem organik yang memiliki huungan antar bagiannya untuk mempertahankan masyarakat. Interaksi sosial di dalam masyarakat Singkawang dikembangkan melalui interaksi di dalam lingkup keluarga, lingkungan sekitar, aktifitas ekonomi, para pimpinan agama, dan hubungan di dalam lingkup budaya dan tradisi. Meskipun demikian, hubungan antar unsur masyarakat masih kosmopolitan, yang di dalamnya anggota masyarakat kurang aktif dalam mengembangkan harmoni masyarakat.

  19. A comprehensive analysis and hardware implementation of control strategies for high output voltage DC-DC boost power converter

    OpenAIRE

    Padmanaban, Sanjeevikumar; Grandi, Gabriele; Blaabjerg, Frede; Wheeler, Patrick; Siano, Pierluigi; Hammami, Manel

    2017-01-01

    Classical DC-DC converters used in high voltage direct current (HVDC) power transmission systems, lack in terms of efficiency, reduced transfer gain and increased cost with sensor (voltage/current) numbers. Besides, the internal self-parasitic behavior of the power components reduces the output voltage and efficiency of classical HV converters. This paper deals with extra high-voltage (EHV) dc-dc boost converter by the application of voltage-lift technique to overcome the aforementioned defic...

  20. Power Oscillations Damping in DC Microgrids

    DEFF Research Database (Denmark)

    Hamzeh, Mohsen; Ghafouri, Mohsen; Karimi, Houshang

    2016-01-01

    This paper proposes a new control strategy for damping of power oscillations in a multi-source dc microgrid. A parallel combination of a fuel cell (FC), a photovoltaic (PV) system and a supercapacitor (SC) are used as a hybrid power conversion system (HPCS). The SC compensates for the slow transi...... of the proposed control scheme is verified using hardware-in-the-loop (HIL) simulations carried out in OPAL-RT technologies....

  1. Circuit Regulates Speed Of dc Motor

    Science.gov (United States)

    Weaver, Charles; Padden, Robin; Brown, Floyd A., Jr.

    1990-01-01

    Driving circuit regulates speed of small dc permanent-magnet motor in tape recorder. Two nested feedback loops maintain speed within 1 percent of constant value. Inner loop provides coarse regulation, while outer loop removes most of variation in speed that remains in the presence of regulation by the inner loop. Compares speed of motor with commanded speed and adjusts current supplied to motor accordingly.

  2. DC Characterization of Different Advanced MOSFET Architectures

    International Nuclear Information System (INIS)

    Jomaah, J.; Fadlallah, M.; Ghibaudo, G.

    2011-01-01

    A review of recent results concerning the DC characterization of FD- and Double Gate SOI MOSFET's and FinFETs in modern CMOS technologies is given. By proper extraction techniques, distinction between the different interaction mechanisms is done. Parameter extraction conducted at room and low temperature clearly indicates that the mobility is directly impacted by shrinking the gate length in sub 100nm architectures. (author)

  3. Development of a smart DC grid model

    Energy Technology Data Exchange (ETDEWEB)

    Dalimunthe, Amty Ma’rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made, E-mail: imadejoni@phys.unpad.ac.id [Lab. of Instrumentation System and Functional Material Processing, Physics Department, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang KM21, Jatinangor 45363, Jawa Barat (Indonesia)

    2016-03-11

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become ‘smart’. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  4. Development of a smart DC grid model

    International Nuclear Information System (INIS)

    Dalimunthe, Amty Ma’rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made

    2016-01-01

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become ‘smart’. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  5. Frequency analysis of DC tolerant current transformers

    International Nuclear Information System (INIS)

    Mlejnek, P; Kaspar, P

    2013-01-01

    This article deals with wide frequency range behaviour of DC tolerant current transformers that are usually used in modern static energy meters. In this application current transformers must comply with European and International Standards in their accuracy and DC tolerance. Therefore, the linear DC tolerant current transformers and double core current transformers are used in this field. More details about the problems of these particular types of transformers can be found in our previous works. Although these transformers are designed mainly for power distribution network frequency (50/60 Hz), it can be interesting to understand their behaviour in wider frequency range. Based on this knowledge the new generations of energy meters with measuring quality of electric energy will be produced. This solution brings better measurement of consumption of nonlinear loads or measurement of non-sinusoidal voltage and current sources such as solar cells or fuel cells. The determination of actual power consumption in such energy meters is done using particular harmonics component of current and voltage. We measured the phase and ratio errors that are the most important parameters of current transformers, to characterize several samples of current transformers of both types

  6. Ac-dc converter firing error detection

    International Nuclear Information System (INIS)

    Gould, O.L.

    1996-01-01

    Each of the twelve Booster Main Magnet Power Supply modules consist of two three-phase, full-wave rectifier bridges in series to provide a 560 VDC maximum output. The harmonic contents of the twelve-pulse ac-dc converter output are multiples of the 60 Hz ac power input, with a predominant 720 Hz signal greater than 14 dB in magnitude above the closest harmonic components at maximum output. The 720 Hz harmonic is typically greater than 20 dB below the 500 VDC output signal under normal operation. Extracting specific harmonics from the rectifier output signal of a 6, 12, or 24 pulse ac-dc converter allows the detection of SCR firing angle errors or complete misfires. A bandpass filter provides the input signal to a frequency-to-voltage converter. Comparing the output of the frequency-to-voltage converter to a reference voltage level provides an indication of the magnitude of the harmonics in the ac-dc converter output signal

  7. Marvel and DC Characters Inspired by Arachnids

    Directory of Open Access Journals (Sweden)

    Elidiomar Ribeiro Da-Silva

    2014-12-01

    Full Text Available This article compares arachnid-based Marvel and DC comics characters. The composition of a comic book character often has interesting ‘real-life’ influences. Given the strong connection between arachnids (especially spiders, scorpions and mites, all belonging to the zoological class 'Arachnida' and human beings it is not surprising that they have inspired many fictional characters. We recorded 84 Marvel Comics characters and 40 DC Comics characters, detailed in the dataset that accompanies the article (Da-Silva 2014. Most characters have been created recently, since the 1990s. Marvel has significantly more arachnid characters than DC. As for taxonomic classification, the characters were based mostly on spiders (zoological order 'Araneae'. Of the total characters, the majority are human beings, but an overwhelming number have at least some typical arachnid features. Villains (60.91% of total are significantly more numerous, considering the sum of the two publishers. Arachnids have bad reputation for being dangerous (Thorp and Woodson 1976; Ruppert and Barnes 1996. Since the public usually considers spiders, scorpions and mites “harmful” in general, we expected a larger contingent of villains. However, there was no statistical difference between the amount of villains and heroes in Marvel characters. It did not happen probably due to the success of one character: the Amazing Spider-Man.

  8. Performance of 22.4-kW nonlaminated-frame dc series motor with chopper controller. [a dc to dc voltage converter

    Science.gov (United States)

    Schwab, J. R.

    1979-01-01

    Performance data obtained through experimental testing of a 22.4 kW traction motor using two types of excitation are presented. Ripple free dc from a motor-generator set for baseline data and pulse width modulated dc as supplied by a battery pack and chopper controller were used for excitation. For the same average values of input voltage and current, the motor power output was independent of the type of excitation. However, at the same speeds, the motor efficiency at low power output (corresponding to low duty cycle of the controller) was 5 to 10 percentage points lower on chopped dc than on ripple free dc. The chopped dc locked-rotor torque was approximately 1 to 3 percent greater than the ripple free dc torque for the same average current.

  9. ETIKA BISNIS AL-GHAZALI DAN ADAM SMITH DALAM PERSPEKTIF ILMU BISNIS DAN EKONOMI

    Directory of Open Access Journals (Sweden)

    AM. M. Hafidz MS.

    2013-05-01

    Full Text Available Penelitian ini adalah untuk mengeksplorasi: (1 pembangunan etika bisnis yang telah dirumuskan oleh al-Ghazali dan Adam Smith, (2 persamaan dan perbedaan antara dua etika bisnis pria, dan (3 relevansi bisnis mereka etika bisnis modern dunia dan ekonomi. Bisnis etika dibangun oleh al-Ghazali dan Smith di dataran praksis tidak jauh berbeda. Etika bisnis konstruksi dibangun oleh al-Ghazali didasarkan pada prinsip-prinsip seperti orientasi itikad baik tentang dunia dan akhirat, kejujuran, kepentingan pribadi dan social keseimbangan, dan perilaku / perbuatan yang tepat. Di sisi lain, etika bisnis konstruksi dibangun oleh Smith, berdasarkan keadilan, altruisme, keadilan dan liberal (kebebasan ekonomi. Baik etika bisnis yang diperkenalkan oleh kedua sangat relevan untuk menjadi digunakan sebagai bahan pokok acuan dalam etika bisnis modern.

  10. Pengembangan Sistem Otomatisasi AC dan Lampu Menggunakan Fuzzy dan Raspberry Pi

    Directory of Open Access Journals (Sweden)

    Rudy Ariyanto

    2017-11-01

    Full Text Available Otomatisasi AC dan lampu dilakukan untuk menghemat energi yang digunakan pada kehidupan sehari-hari. Dalam pengembangan otomatisasi AC dan lampu perlu menerapkan sebuah perangkat yang memiliki fungsi maksimal dengan harga yang minimal. Raspberry Pi merupakan perangkat atau modul dengan harga rendah yang mampu melakukan komunikasi wireless tanpa bantuan modul lain. Dalam pengembangan otomatisasi AC dan lampu juga diperlukan sebuah metode yang mampu melakukan kontrol terhadap nyala AC dan lampu. Penerapan metode fuzzy dapat dilakukan untuk menghimpun informasi keadaan ruang yang didapat dari sensor untuk menentukan nyala AC dan lampu secara otomatis. Oleh sebab itu pada penelitian ini mengusulkan pengembangan otomatisasi AC dan lampu menggunakan Raspberry Pi dan Fuzzy. Otomatisasi AC dan lampu menggunakan Raspberry Pi yang menerapkan metode Fuzzy dapat menghemat energi hingga 59,87% dalam hal lama waktu nyala AC dan 57,47% untuk lumenasi lampu

  11. Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway di Petshop "PetZone"

    Directory of Open Access Journals (Sweden)

    Siska Fadhilah Wati

    2013-09-01

    Full Text Available Dewasa ini teknologi informasi sangat membantu dalam dunia bisnis. Kemudahan yang ditawarkan akan menjaring lebih banyak konsumen. Namun, perusahan tingkat menengah seperti PetZone saat ini masih jarang yang menawarkan kemudahan berbelanja atau pemesanan layanan secara online. Oleh karena itu diperlukan sebuah sistem berbasis web di perusahaan PetZone yang dapat memudahkan pemilik dan karyawan dalam apenjualan, pelayanan, dan pemasaran, serta memudahkan pelanggan dalam jual-beli barang dan jasa. Atas dasar masalah tersebut dibangun Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway untuk menunjang proses bisnis yang ada. Sistem informasi dibangun menggunakan bahasa pemrograman PHP framework Codeigniter, javascript untuk tampilan yang dinamis, dan database MySQL. Proses pembuatan dan pengembangan Sistem Informasi Penjualan ini menggunakan metode air terjun. Metode air terjun meliputi kebutuhan pengguna, analisis, rancangan, implementasi dan pengujian. Pemodelan Sistem Informasi yang dibangun menggunakan metode berorientasi objek UML (Unified Modeling Language yang terdiri dari Use case  diagram, Class diagram dan Sequence diagram. Hasil pengujian Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway menunjukkan bahwa semua fitur yang terdapat baik dalam sistem informasi maupun SMS gateway dapat bekerja dengan baikdengan ratusan sample data, dan server SMS gateway dapat memproses lebih dari satu SMS secara bersamaan. Dalam perkembangan ke depannya nanti, Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway masih dapat dikembangkan lagi dengan menambah fitur-fitur pada SMS gateway sehingga lebih memudahkan konsumen.

  12. Digital DC beam current measurement on SSRF storage ring

    International Nuclear Information System (INIS)

    Xiong Liang; Yin Chongxian; Liu Ming; Chen Jianfeng

    2011-01-01

    Both DC current transformer (DCCT) and integrating current transformer (ICT) can be used in DC beam current measurement. The ICT has strong capability of resisting electromagnetic interference, but its measurement accuracy cannot satisfy the DC beam current measurement requirement when using traditional high speed A/D. With high resolution A/D and equivalent sampling system, DC beam current measuring system based on ICT can reach high accuracy compared with DCCT system. In this paper, the ICT-based DC beam current measurement, equivalent sampling method and testing results at Shanghai Synchrotron Radiation Facility(SSRF) is described. (authors)

  13. Efikasi Kendiri: Perbandingan Antara Islam dan Barat

    Directory of Open Access Journals (Sweden)

    Noornajihan, J.

    2014-12-01

    Full Text Available Terminologi efikasi kendiri (EK merupakan terminologi yang diperkenalkan dalam ilmu psikologi sekitar tahun 70-an. Namun, istilah ini masih kurang difahami oleh kebanyakan individu terutama mereka yang bukan berlatar belakangkan bidang psikologi. Oleh itu, satu keperluan hasil penulisan ini diketengahkan, memandangkan konsep ini penting dalam diri setiap individu bagi memacu kecemerlangan diri. Justeru, kertas kerja ini akan mengupas serba ringkas mengenai konsep EK dari perspektif Islam dan Barat, dengan melihat kepada beberapa titik persamaan dan perbezaan antara kedua-dua pandangan. Islam dan Barat bersetuju bahawa individu yang memiliki EK yang tinggi merupakan individu yang berfikiran positif, berani mengambil risiko dan tidak mudah berputus. Namun pandangan Islam terhadap konsep ini lebih luas, kerana Islam mengaitkan konsep ini dengan konsep tauhid uluhiyyah dan konsep manusia sebagai ahsan al-taqwim. Oleh demikian, EK dari perspektif Islam lebih bersifat kekal dan umum, di samping individu yang berefikasi tinggi menurut Islam ialah individu yang memiliki sifat sabar, syukur, redha dan redha.

  14. PERANCANGAN DAN PENGEMBANGAN PROTOTYPE SISTEM PARKIR

    Directory of Open Access Journals (Sweden)

    Indah Ayu Septriyaningrum

    2016-10-01

    Abstrak  Sistem parkir manual pada pelayanan parkir mall memerlukan pengelolaan dan pengembangan sistem yang lebih rumit dan jauh dari kata efisien. Informasi yang didapatkan pengelola parkir terkait kondisi parkir di lapangan setiap harinya masih kurang. Tujuan dari penelitian ini adalah merancang dan mengembangkan prototype sistem parkir. Metode pengembangan dan perancangan sistem pada penelitian ini adalah metode Waterfall. Hasil yang didapatkan adalah sistem ini dapat mendeteksi keberadaan mobil pada slot parkir yang tersedia dengan bantuan Intel Galileo Board Gen 2 sebagai kontroler, sensor LDR (Light Dependent Resistor dan sensor ultrasonik (PING sebagai alat bantu pendeteksi keberadaan mobil. Sistem dapat menampilkan aktifitas parkir pada aplikasi web seperti kondisi lahan parkir kosong, lahan terisi, waktu masuk, waktu keluar, lama parkir dan kapasitas parkir yang tersedia serta grafik pemakaian lahan parkir. Dapat disimpulkan bahwa perancangan dan pengembangan sistem berhasil diimplementasikan. Kata Kunci : Sistem parkir, waterfall, Intel Galileo Board Gen 2,sensor LDR (Light Dependent Resistor, sensor ultrasonik

  15. Controlling DC permeability in cast steels

    International Nuclear Information System (INIS)

    Sumner, Aaran; Gerada, Chris; Brown, Neil; Clare, Adam

    2017-01-01

    Annealing (at multiple cooling rates) and quenching (with tempering) was performed on specimens of cast steel of varying composition. The aim was to devise a method for selecting the steel with the highest permeability, from any given range of steels, and then increasing the permeability by heat treatment. Metallographic samples were imaged using optical microscopy to show the effect of the applied heat treatments on the microstructure. Commonly cast steels can have DC permeability altered by the careful selection of a heat treatment. Increases of up to 381% were achieved by annealing using a cooling rate of 6.0 °C/min. Annealing was found to cause the carbon present in the steel to migrate from grain boundaries and from within ferrite crystals into adjacent pearlite crystals. The migration of the carbon resulted in less carbon at grain boundaries and within ferrite crystals reducing the number of pinning sites between magnetic domains. This gives rise to a higher permeability. Quenching then tempering was found to cause the formation of small ferrite crystals with the carbon content of the steel predominately held in the martensitic crystal structures. The results show that with any given range of steel compositions the highest baseline DC permeability will be found with the steel that has the highest iron content and the lowest carbon content. For the samples tested in this paper a cooling rate of 4.5 °C/min resulted in the relative permeability of the sample with the highest baseline permeability, AS4, increasing from 783 to 1479 at 0.5 T. This paper shows how heat treatments commonly applied to hypoeutectoid cast steels, to improve their mechanical performance, can be used to also enhance electromagnetic properties of these alloys. The use of cast steels allows the creation of DC components for electrical machines not possible by the widely used method of stacking of electrical grade sheet steels. - Highlights: • A range of structural steels had their

  16. Controlling DC permeability in cast steels

    Energy Technology Data Exchange (ETDEWEB)

    Sumner, Aaran, E-mail: aaran.sumner@nottingham.ac.uk [University of Nottingham, Nottingham University Park Campus, Nottingham NG7 2RD, England (United Kingdom); Gerada, Chris, E-mail: chris.gerada@nottingham.ac.uk [Electrical Machines, University of Nottingham, Tower Building, Nottingham NG7 2RD, England (United Kingdom); Brown, Neil, E-mail: neil.brown@cummins.com [Advanced Electrical Machines Research and Technology at Cummins Power Generation, Peterborough PE2 6FZ, England (United Kingdom); Clare, Adam, E-mail: adam.clare@nottingham.ac.uk [Advanced Manufacturing, University of Nottingham, University Park Campus, Nottingham NG7 2RD, England (United Kingdom)

    2017-05-01

    Annealing (at multiple cooling rates) and quenching (with tempering) was performed on specimens of cast steel of varying composition. The aim was to devise a method for selecting the steel with the highest permeability, from any given range of steels, and then increasing the permeability by heat treatment. Metallographic samples were imaged using optical microscopy to show the effect of the applied heat treatments on the microstructure. Commonly cast steels can have DC permeability altered by the careful selection of a heat treatment. Increases of up to 381% were achieved by annealing using a cooling rate of 6.0 °C/min. Annealing was found to cause the carbon present in the steel to migrate from grain boundaries and from within ferrite crystals into adjacent pearlite crystals. The migration of the carbon resulted in less carbon at grain boundaries and within ferrite crystals reducing the number of pinning sites between magnetic domains. This gives rise to a higher permeability. Quenching then tempering was found to cause the formation of small ferrite crystals with the carbon content of the steel predominately held in the martensitic crystal structures. The results show that with any given range of steel compositions the highest baseline DC permeability will be found with the steel that has the highest iron content and the lowest carbon content. For the samples tested in this paper a cooling rate of 4.5 °C/min resulted in the relative permeability of the sample with the highest baseline permeability, AS4, increasing from 783 to 1479 at 0.5 T. This paper shows how heat treatments commonly applied to hypoeutectoid cast steels, to improve their mechanical performance, can be used to also enhance electromagnetic properties of these alloys. The use of cast steels allows the creation of DC components for electrical machines not possible by the widely used method of stacking of electrical grade sheet steels. - Highlights: • A range of structural steels had their

  17. Series-Connected High Frequency Converters in a DC Microgrid System for DC Light Rail Transit

    Directory of Open Access Journals (Sweden)

    Bor-Ren Lin

    2018-01-01

    Full Text Available This paper studies and presents a series-connected high frequency DC/DC converter connected to a DC microgrid system to provide auxiliary power for lighting, control and communication in a DC light rail vehicle. Three converters with low voltage and current stresses of power devices are series-connected with single transformers to convert a high voltage input to a low voltage output for a DC light rail vehicle. Thus, Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs with a low voltage rating and a turn-on resistance are adopted in the proposed circuit topology in order to decrease power losses on power switches and copper losses on transformer windings. A duty cycle control with an asymmetric pulse-width modulation is adopted to control the output voltage at the desired voltage level. It is also adopted to reduce switching losses on MOSFETs due to the resonant behavior from a leakage inductor of an isolated transformer and output capacitor of MOSFETs at the turn-on instant. The feasibility and effectiveness of the proposed circuit have been verified by a laboratory prototype with a 760 V input and a 24 V/60 A output.

  18. RF-superimposed DC and pulsed DC sputtering for deposition of transparent conductive oxides

    International Nuclear Information System (INIS)

    Stowell, Michael; Mueller, Joachim; Ruske, Manfred; Lutz, Mark; Linz, Thomas

    2007-01-01

    Transparent conductive oxide films are widely used materials for electronic applications such as flat panel displays and solar cells. The superposition of DC and pulsed DC power by a certain fraction of RF power was applied to deposit indium tin oxide films. This technique allows an additional tuning of different parameters relevant to film growth, and yields high quality films even under kinetically limited conditions. A long-term stable RF/DC process could be realized by using different combinations of standard power supply components, which includes a fully reliable arc handling system for both the RF and DC generators. The effectiveness of the arc handling system is illustrated by the current and voltage behavior recorded for actual arcing events. The resistivity of indium tin oxide films is strongly influenced by the respective sputtering mode. The best resistivity values of 145-148 μΩ cm were obtained by RF-superimposed pulsed DC sputtering at a pulse frequency between 100 and 200 kHz and a substrate temperature as low as 140 deg. C. In addition, the films were extremely smooth with a surface roughness of 1-2.5 nm

  19. Guest Editorial Special Issue on Structured DC Microgrids

    DEFF Research Database (Denmark)

    Guerrero, Josep M.; Tan, Don F. D.

    2017-01-01

    With the development of dc coupled devices, such as photovoltaic generations, batteries, supercapacitors, LEDs, computers, and electronics equipment, low-voltage dc distribution networks, structured dc microgrids are emerging as a natural platform to integrate renewable energy sources. However...... in either series/parallel, forming a number of dc busses with different voltage levels. Recently, with the advance of new dc power technologies, several ongoing standards, alliances, and initiatives are bringing the possibility of developing future homes, offices, buildings, campuses, datacenters, ships......, satellites, aircrafts, and other electrical power systems to operate totally or dominantly in dc. Research is being carried out in both the system and component levels of modeling, control, and stability of structured dc microgrids. New high-efficiency topologies and protections are also key nontrivial...

  20. Efektivitas Weblog dan Facebook Terintegrasi untuk Pembelajaran Virtual

    OpenAIRE

    Hartono

    2014-01-01

    Abstrak: Saat ini, banyak mahasiswa menghabiskan waktu mereka di internet. Mereka melakukan kegiatan seperti membuat blog, mengunduh, mengunggah, chatting, dan berinteraksi melalui facebook. Mahasiswa sekarang ini hidup dengan teknologi. Penelitian menunjukkan bahwa weblog dan facebook berpotensi mendukung belajar dan mengajar. Guru dan pendidik menggunakan kegiatan tersebut untuk meningkatkan kualitas belajar. Penelitian ini bertujuan untuk mengetahui efektivitas weblog dan facebook ketika d...

  1. A Decentralized Current-Sharing Controller Endows Fast Transient Response to Parallel DC-DC Converters

    DEFF Research Database (Denmark)

    Wang, Haojie; Han, Minxiao; Han, Renke

    2018-01-01

    This paper proposes a decentralized current-sharing control strategy to endow fast transient response to paralleled DC-DC converters systems, such as DC microgrids or distributed power systems. The proposed controller consist of two main control loops: an external voltage droop control for current......-sharing proposes and an internal current loop. The external droop control loop is designed as a voltage loop with embedded virtual impedance, which avoids the use of a slow voltage loop and a separate extra virtual impedance loop that may limit the system bandwidth. The internal current loop, thanks...... and the proposed embedded-virtual-impedance based I-V droop. In order to compare the dynamic response performances between two droop controllers, their state-space models have been developed and analyzed in this paper. The results show that the dynamic response of the I-V droop control is faster than...

  2. Lõuka tuuliku restaureerimine / Dan Lukas

    Index Scriptorium Estoniae

    Lukas, Dan

    2005-01-01

    Hiiumaal Pühalepa vallas Vahtrepa külas Lõuka talu maadel asuva pukktuuliku ajaloost, restaureerimise käigust. Teostus: Dan Lukas. Muinsuskaitseline järelevalve: Tõnu Sepp, tema kommentaar. Ill.:pukktuuliku lõiked ja korruste plaanid, 7 värv. fotot

  3. Internal Control: Peran Dan Perkembangannya

    OpenAIRE

    Murtin, Alek

    2000-01-01

    Perhatian terhadap pentingnya internal control dalam organisasi berjalan dari waktu ke waktu untuk meningkatkan fungsi internal control yang disesuaikan dengan perkembangan lingkungan organisasi, dimulai dengan adanya internal check, kemudian internal control system, internal control structure dan terakhir adalah internal control-integrated framework. Internal control system sempat berkembang beberapa tahun di Indonesia yang selanjutnya digantikan oleh internal control structure yang digunaka...

  4. Asuransi Takaful: Prospek Dan Tantangannya

    OpenAIRE

    Sobirin, Achmad; Muhtar, Muchsin

    1994-01-01

    Dewasa ini perhatian terhadap nilai-nilai syariah Islam terhadap muamalah khususnya di bidang ekonomi menjadi besar. Lembaga perekonomian yang terjalin dengan pranata keagamaan makin menggejala dimana-mana dan kini sedang tumbuh mencari bentuk untuk dapat diterima di tengah-tengah masyarakat.

  5. Integrating DC/DC Conversion with Possible Reconfiguration within Submodule Solar Photovoltaic Systems

    Science.gov (United States)

    Huang, Peter Jen-Hung

    This research first proposes a method to merge photovoltaic (PV) cells or PV panels within the internal components DC-DC converters. The purpose of this merged structure is to reconfigure the PV modules between series and parallel connections using high switching frequencies (hundreds of kHz). This leads to multi-levels of voltages and currents that become applied to the output filter of the converter. Further, this research introduces a concept of a switching cell that utilizes the reconfiguration of series and parallel connections in DC-DC converters. The switching occurs at high switching frequency and the switches can be integrated to be within the solar panels or in between the solar cells. The concept is generalized and applied to basic buck and boost topologies. As examples of the new types of converters: reconfigurable PV-buck and PV-boost converter topologies are presented. It is also possible to create other reconfigurable power converters: non-isolated and isolated topologies. Analysis, simulation and experimental verification for the reconfigurable PV-buck and PV-boost converters are presented extensively to illustrate proof of concept. Benefits and drawbacks of the new approach are discussed. The second part of this research proposes to utilize the internal solar cell capacitance and internal solar module wire parasitic inductances to replace the input capacitor and filter inductor in boost derived DC-DC converters for energy harvesting applications. High switching frequency (MHz) hard switched and resonant boost converters are proposed. Their analysis, simulation and experimental prototypes are presented. A specific proof-of-concept application is especially tested for foldable PV panels, which are known for their high internal wire inductance. The experimental converters successfully boost solar module voltage without adding any external input capacitance or filter inductor. Benefits and drawbacks of new proposed PV submodule integrated boost

  6. Efficient Visible Light Communication Transmitters Based on Switching-Mode dc-dc Converters

    Science.gov (United States)

    2018-01-01

    Visible light communication (VLC) based on solid-state lighting (SSL) is a promising option either to supplement or to substitute existing radio frequency (RF) wireless communication in indoor environments. VLC systems take advantage of the fast modulation of the visible light that light emitting diodes (LEDs) enable. The switching-mode dc-to-dc converter (SMCdc-dc) must be the cornerstone of the LED driver of VLC transmitters in order to incorporate the communication functionality into LED lighting, keeping high power efficiency. However, the new requirements related to the communication, especially the high bandwidth that the LED driver must achieve, converts the design of the SMCdc-dc into a very challenging task. In this work, three different methods for achieving such a high bandwidth with an SMCdc-dc are presented: increasing the order of the SMCdc-dc output filter, increasing the number of voltage inputs, and increasing the number of phases. These three strategies are combinable and the optimum design depends on the particular VLC application, which determines the requirements of the VLC transmitter. As an example, an experimental VLC transmitter based on a two-phase buck converter with a fourth-order output filter will demonstrate that a bandwidth of several hundred kilohertz (kHz) can be achieved with output power levels close to 10 W and power efficiencies between 85% and 90%. In conclusion, the design strategy presented allows us to incorporate VLC into SSL, achieving high bit rates without damaging the power efficiency of LED lighting. PMID:29642455

  7. Approches pour la reduction de l'impact de defaut dans le transport d'energie du parc eolien offshore via VSC-HVDC =

    Science.gov (United States)

    Benadja, Mounir

    Dans ce travail est presente un systeme de generation d'energie d'un parc eolien offshore et un systeme de transport utilisant les stations VSC-HVDC connectees au reseau principal AC onshore. Trois configurations ont ete etudiees, modelisees et validees par simulation. Dans chacune des configurations, des contributions ameliorant les cotes techniques et economiques sont decrites ci-dessous : La premiere contribution concerne un nouvel algorithme MPPT (Maximum Power Point Tracking) utilise pour l'extraction de la puissance maximale disponible dans les eoliennes des parcs offshores. Cette technique d'extraction du MPPT ameliore le rendement energetique de la chaine de conversion des energies renouvelables notamment l'energie eolienne a petite et a grande echelles (parc eolien offshore) qui constitue un probleme pour les constructeurs qui se trouvent confrontes a developper des dispositifs MPPT simples, moins couteux, robustes, fiables et capable d'obtenir un rendement energetique maximal. La deuxieme contribution concerne la reduction de la taille, du cout et de l'impact des defauts electriques (AC et DC) dans le systeme construit pour transporter l'energie d'un parc eolien offshore (OWF) vers le reseau principal AC onshore via deux stations 3L-NPC VSCHVDC. La solution developpee utilise des observateurs non-lineaires bases sur le filtre de Kalman etendu (EKF). Ce filtre permet d'estimer la vitesse de rotation et la position du rotor de chacune des generatrices du parc eolien offshore et de la tension du bus DC de l'onduleur DC-AC offshore et des deux stations 3L-NPC-VSC-HVDC (offshore et onshore). De plus, ce developpement du filtre de Kalman etendu a permis de reduire l'impact des defauts AC et DC. Deux commandes ont ete utilisees, l'une (commande indirect dans le plan abc) avec EKF integre destinee pour controler le convertisseur DC-AC offshore et l'autre (commande d-q) avec EKF integre pour controler les convertisseurs des deux stations AC-DC et DC-AC tout en

  8. KETENTUAN TENTANG STANDAR PELAYANAN MINIMAL BIDANG KELUARGA BERENCANA DAN KELUARGA SEJAHTERA BERDASARKAN ASAS PERIKEMANUSIAAN DAN HAK ASASI MANUSIA

    Directory of Open Access Journals (Sweden)

    . Riyanti

    2017-01-01

    Hasil penelitian, ketentuan tentang standar pelayanan minimal bidang keluarga berencana, keluarga sejahtera dan asas perikemanusiaan dengan hak asasi manusia sangat berhubungan keterbatasan lingkup pelayanan dan standar pelaksanaan Komunikasi Informasi dan Edukasi yang tidak jelasberdampak pada tidak dipenuhinya hak asasi manusia untuk mendapatkan kesetaraan dan kebebasan dalam pelayanan keluarga berencana dan keluarga sejahtera.

  9. A Novel Quasi-SEPIC High-Voltage Boost DC-DC Converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; N. Soltani, Mohsen; Blaabjerg, Frede

    2017-01-01

    This paper proposes a modified coupled-inductor SEPIC dc-dc converter for low power and high voltage gain applications such as for piezoelectric drive systems. The converter uses the same components as of SEPIC converter with an additional diode. Compared to conventional topologies with similar...... voltage gain expression, the proposed topology uses less components to achieve same or even higher voltage gain. This helps to design a very compact and light weight converter with higher power density at lower cost. Due to brevity, the principle of operation, theoretical analysis and comparison supported...

  10. A high voltage gain quasi Z-source isolated DC/DC converter

    DEFF Research Database (Denmark)

    Siwakoti, Yam P.; Blaabjerg, Frede; Loh, Poh Chiang

    2014-01-01

    A compact quasi-Z-source DC/DC converter is presented with high voltage gain, isolated output, and improved efficiency. The improvements in size and performance were achieved by using a square wave inverter with only two output switches driving an isolating transformer in push-pull mode, followed...... by a voltage doubling output rectifier. The converter is well-suited to applications requiring a high voltage gain, especially renewable energy sources such as photovoltaic and fuel-cell power supplies. To demonstrate the converter's performance a prototype designed to output 400 V at 500 W was constructed...

  11. Ultra-Step-Up DC-DC Converter with Integrated Autotransformer and Coupled Inductor

    DEFF Research Database (Denmark)

    Siwakoti, Yam Prasad; Blaabjerg, Frede; Loh, Poh Chiang

    2016-01-01

    This paper introduces a new single-switch nonisolated dc-dc converter with very high voltage transfer ratio and reduced semiconductor voltage stress. The converter utilizes an integrated autotransformer and a coupled inductor on the same core to achieve a high step-up voltage gain without extreme...... duty cycle. Further, an integrated passive regenerative circuit recycles the leakage energy of the coupled magnetics and transfer the leakage energy to the load, which helps to avoid high voltage spikes across the switch. This feature along with low stress on the switching device enables the designer...

  12. Modified High Voltage Conversion Inverting Cuk DC-DC Converter for Renewable Energy Application

    DEFF Research Database (Denmark)

    Maroti, Pandav Kiran; Padmanaban, Sanjeevikumar; Wheeler, Patrick

    2017-01-01

    controlled device DC-DC topology. The voltage conversion ratio of proposed converter has increased by ten times of the conventional Cuk converterat a duty ratio of 90%. The detailed analysis of the voltage conversion ratio and losses occur due to internal resistance of components is done in the paper......The proposed exertion represents the modified high voltage conversion Cuk converter for renewable energy application. The proposed Cuk converter is a combination of the conventional boost converter and Cuk converter. The arrangement of the proposed converter make, such as, it becomes the single...

  13. High-Efficiency Photovoltaic System Using Partially-Connected DC-DC Converter

    Science.gov (United States)

    Uno, Masatoshi; Kukita, Akio; Tanaka, Koji

    Power conversion electronics for photovoltaic (PV) systems are desired to operate as efficiently as possible to exploit the power generated by PV modules. This paper proposes a novel PV system in which a dc-dc converter is partially connected to series-connected PV modules. The proposed system achieves high power-conversion efficiency by reducing the passing power and input/output voltages of the converter. The theoretical operating principle was experimentally validated. Resultant efficiency performances of the proposed and conventional systems demonstrated that the proposed system was more efficient in terms of power conversion though the identical converter was used for the both systems.

  14. Four Quadrants Integrated Transformers for Dual-input Isolated DC-DC Converters

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Zhang, Zhe; Andersen, Michael A. E.

    2012-01-01

    A common limitation of power coupling effect in some known multiple-input dc-dc converters has been addressed in many literatures. In order to overcome this limitation, a new concept for decoupling the primary windings in the integrated multiple-winding transformers based on 3-dimensional (3D...... perpendicular primary windings, a name of “four quadrants integrated transformers” (FQIT) is therefore given to the proposed construction. Since the two primary windings are uncoupled, the FQIT allows the two input power stages to transfer the energy into the output load simultaneously or at any...

  15. State-plane analysis of zero-voltage-switching resonant dc/dc power converters

    Science.gov (United States)

    Kazimierczuk, Marian K.; Morse, William D.

    The state-plane analysis technique for the zero-voltage-switching resonant dc/dc power converter family of topologies, namely the buck, boost, buck-boost, and Cuk converters is established. The state plane provides a compression of information that allows the designer to uniquely examine the nonlinear dynamics of resonant converter operation. Utilizing the state plane, resonant converter modes of operation are examined and the switching frequencies are derived for the boundaries between these modes, including the boundary of energy conversion.

  16. DC-DC Converter Topology Assessment for Large Scale Distributed Photovoltaic Plant Architectures

    Energy Technology Data Exchange (ETDEWEB)

    Agamy, Mohammed S; Harfman-Todorovic, Maja; Elasser, Ahmed; Sabate, Juan A; Steigerwald, Robert L; Jiang, Yan; Essakiappan, Somasundaram

    2011-07-01

    Distributed photovoltaic (PV) plant architectures are emerging as a replacement for the classical central inverter based systems. However, power converters of smaller ratings may have a negative impact on system efficiency, reliability and cost. Therefore, it is necessary to design converters with very high efficiency and simpler topologies in order not to offset the benefits gained by using distributed PV systems. In this paper an evaluation of the selection criteria for dc-dc converters for distributed PV systems is performed; this evaluation includes efficiency, simplicity of design, reliability and cost. Based on this evaluation, recommendations can be made as to which class of converters is best fit for this application.

  17. GaN-based High Efficiency Bidirectional DC-DC Converter with 10 MHz Switching Frequency

    DEFF Research Database (Denmark)

    Kruse, Kristian; Zhang, Zhe; Elbo, Mads

    2017-01-01

    -isolated bidirectional DC-DC converter equipped with Gallium Nitride (GaN) semiconductor transistors is presented. The converter’s operation principles, zero-voltage switching (ZVS) constraints and dead-time effects are studied. Moreover, the optimization and tradeoffs on the adopted high-frequency inductor...... are achieved. Moreover, the measured losses can match the theoretically calculated counterparts well, therefore the design and analysis are verified. However, from the experimental test carried out, it can also be seen, that making a compact converter, even for a GaN-based one, operate at 10 MHz and 100 W...

  18. Deadbeat control of power leveling unit with bidirectional buck/boost DC/DC converter

    OpenAIRE

    Hamasaki, Shin-ichi; Mukai, Ryosuke; Yano, Yoshihiro; Tsuji, Mineo

    2014-01-01

    As a distributed generation system increases, a stable power supply becomes difficult. Thus control of power leveling (PL) unit is required to maintain the balance of power flow for irregular power generation. The unit is required to respond to change of voltage and bidirectional power flow. So the bidirectional buck/boost DC/DC converter is applied for the control of PL unit in this research. The PL unit with Electric double-layer capacitor (EDLC) is able to absorb change of power, and it is...

  19. Comparison of two different high performance mixed signal controllers for DC/DC converters

    DEFF Research Database (Denmark)

    Jakobsen, Lars Tønnes; Andersen, Michael Andreas E.

    2006-01-01

    This paper describes how mixed signal controllers combining a cheap microcontroller with a simple analogue circuit can offer high performance digital control for DC/DC converters. Mixed signal controllers have the same versatility and performance as DSP based controllers. It is important to have...... an engineer experienced in microcontroller programming write the software algorithms to achieve optimal performance. Two mixed signal controller designs based on the same 8-bit microcontroller are compared both theoretically and experimentally. A 16-bit PID compensator with a sampling frequency of 200 k......Hz implemented in the 16 MIPS, 8-bit ATTiny26 microcontroller is demonstrated....

  20. Very High Frequency Resonant DC/DC Converters for LED Lighting

    DEFF Research Database (Denmark)

    Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.

    2013-01-01

    This paper presents a very high frequency DC/DC converter for LED lighting. Several resonant topologies are compared and their usability discussed. At the end the resonant SEPIC converter is chosen based on the achievable power density and total bill of material. Simulations of a 51 MHz converter...... with 40 V input and 15 V output are made. The simulation shows possibility of achieving efficiency up to 87 % even with a HEXFET Power MOSFET. Three prototypes of the simulated converter are implemented showing good correlation with simulations. The prototypes have efficiencies up to 84 % and power...

  1. State trajectories used to observe and control dc-to-dc converters

    Science.gov (United States)

    Burns, W. W., III; Wilson, T. G.

    1976-01-01

    State-plane analysis techniques are employed to study the voltage stepup energy-storage dc-to-dc converter. Within this framework, an example converter operating under the influence of a constant on-time and a constant frequency controller is examined. Qualitative insight gained through this approach is used to develop a conceptual free-running control law for the voltage stepup converter which can achieve steady-state operation in one on/off cycle of control. Digital computer simulation data are presented to illustrate and verify the theoretical discussions presented.

  2. KINERJA DAN EFISIENSI BANK PEMERINTAH (BUMN DAN BUSN YANG GO PUBLIK DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Sugeng Haryanto

    2012-06-01

    Full Text Available Penelitian ini menganalisis kinerja dan tingkat efisiensi bank-bank BUMN dan BUSN yang go Publik di Bursa Efek Indonesia.  Sample penelitian ini mengambil  tiga bank BUMN Bank BNI 46, Bank Mandiri dan Bank BRI  dan tiga bank BUSN (Bank BCA, Bank Niaga dan Bank Panin dengan periode analisis tahun 2005-2011. Varibael yang digunakan meliputi ROA, ROE, LAR. LDR, NPL dan BOPO. Tujuan dari penelitian ini adalah melihat dan menganalisis perbedaan kinerja antara Bank BUMN dan BUSN yang go public di Bursa Efek Indonesia tahun 2005-2011.  Pendekatan pengukuran kinerja yang digunakan adalah Return on Asset (ROA, Return on Equity (ROE dan Loan to Deposit Ratio (LDR, Loan to Asset Ratio (LAR,  dan efisiensi bank. Hasil dari penelitian menunjukkan bahwa 1 Bank-bank nasional, baik itu bank BUMN maupun BUSN menunjukkan kinerja yang semakin baik, 2 tidak terdapat perbedaan yang signifikan antara kinerja bank BUMN dan BUSN untuk variabel ROA, ROE, LAR, LDR, dan BOPO sedangkan variabel NPL yang merupakan indikator risiko kredit menunjukkan adanya perbedaan yang signifikan antara Bank BUMN dan BUSN

  3. 75 FR 47199 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-9-10 Series Airplanes, DC-9-30...

    Science.gov (United States)

    2010-08-05

    ... Airworthiness Directives; McDonnell Douglas Corporation Model DC- 9-10 Series Airplanes, DC-9-30 Series... existing airworthiness directive (AD), which applies to all McDonnell Douglas Model DC-9-10 series..., 2010). That AD applies to all McDonnell Douglas Corporation Model DC-9-10 series airplanes, DC-9-30...

  4. Feasibility analysis of the application and positioning of DC HTS FCL in a DC microgrid through modeling and simulation using Simulink and SimPowerSystem

    International Nuclear Information System (INIS)

    Khan, U.A.; Shin, W.J.; Seong, J.K.; Oh, S.H.; Lee, S.H.; Lee, B.W.

    2011-01-01

    We modeled DC SFCL by use of SimPowerSystem blocks. We examine the DC fault current limitation in low voltage DC distribution networks. SFCL's affects at critical points were measured. SFCL installed at the substation rectifier branch resulted in abnormal increase of fault current. The strategic location of SFCL is the point of integration of the PV plant with the power grid. DC fault current limitation in DC distribution network is one of the critical issues which need to be taken care of before they can be practically implemented. High temperature superconductors could be efficiently installed to cope with the problem of DC fault currents. In this paper, a generalized DC high temperature superconducting fault current limiter (SFCL) is modeled by integrating Simulink and SimPowerSystem blocks. This model is designed for limiting DC fault currents in low voltage DC distribution networks. A DC microgrid having a low voltage DC distribution network, an integrated photovoltaic plant and domestic customer load is modeled. Transient analysis of the DC microgrid is performed by generating fault and measuring DC fault currents at critical points. The designed DC SFCL is placed at different strategic locations in DC microgrid and fault current limitation performance of DC SFCL in DC microgrid has been analyzed. Moreover, the affects of rapid impedance changing in the distribution network due to the fault followed by DC SFCL activation is investigated. Finally, the best suitable position and affects of DC SFCL in a DC microgrid along with suggestions for implementation have been proposed.

  5. PEMBINAAN DAN PENGEMBANGAN USAHA KECIL

    Directory of Open Access Journals (Sweden)

    Sentot Harman Glendoh

    2001-01-01

    Full Text Available Small business as an economic activity of society on a small scale, has a central role in the economy of Indonesia. Although the economic crisis has created a great disturbance in the live of large and middle-size business, apparently small business continues to function well in the lower levels of the economy. The main role of small business is: 1 use excess labor; 2 as a producer of goods and services at reachable prices for the lower economic levels of society; 3 as a potential producer of foreign exchange because of the success of this type of industry in producing non-oil commodities for export. Remembering that the role of small business is large and has great influence on the lower economic levels of society, it is quite necessary to pay attention to the development of this sector. Abstract in Bahasa Indonesia : Usaha kecil sebagai kegiatan ekonomi rakyat berskala kecil memiliki peran sentral dalam perekonomian Indonesia. Walaupun krisis ekonomi telah memporakporandakan kehidupan bidang usaha besar dan menengah, ternyata usaha kecil tetap tegar dan berjalan marak dikawasan kehidupan ekonomi tingkat bawah. Peran pokok usaha kecil ini adalah: (1 sebagai penyerap tenaga kerja, (2 sebagai penghasil barang dan jasa pada tingkat harga yang terjangkau bagi kebutuhan rakyat banyak yang berpenghasilan rendah, (3 sebagai penghasil devisa negara yang potensial kerena keberhasilannya dalam meproduksi komoditi ekspor non migas. Mengingat peran usaha kecil tersebut sangat besar andilnya bagi negara dan masyarakat kecil dilapisan bawah, maka pembinaan dan pengembangannya sangat perlu diperhatikan. Kata kunci: pembinaan, pengembangan, usaha kecil.

  6. AGROFORESTRI UNTUK ADAPTASI DAN MITIGASI PERUBAHAN IKLIM

    Directory of Open Access Journals (Sweden)

    Tigor Butarbutar

    2017-01-01

    Full Text Available Hilangnya tutupan lahan hutan karena konversi hutan untuk pemukiman, perkebunan, pertanian dan kebutuhan untuk pembangunan di sektor lain, telah menyebabkan perubahan pola cuaca/iklim di berbagai tempat. Perubahan iklim dapat diantisipasi dengan mitigasi dan adaptasi. Mitigasi berarti usahausaha pencegahan yang perlu dilakukan, sedangkan adaptasi merupakan kegiatan-kegiatan penyesuaian yang perlu dilakukan untuk dapat hidup dan bertahan dan meningkatkan ketahanan, kelenturan dan mengarahkemigrasikarenakondisiiklimyangberbeda.Agroforestridapatmemitigasidanmengadaptasi perubahaniklim dengan alasan-alasansebagaiberikut: aPencampuranjenis pohonpenghasilkayu,buah dan lain-lain, karena campuran jenis lebih baik dari tanaman murni; b Pencampuran jenis yang didasarkan pada sifat toleransi ( dan , sehingga akan memanfaatkan seluruh cahaya untuk fotosintesis; c Pencampuran perbedaan umur; d Pencampuran berdasarkan perbedaan waktu pemanenan; e Penggabungan nilai ekonomi, sosial dan budaya sehingga perubahan vegetasi dapat berjalan seiring dengan perubahan sosial dan budaya secara berangsur yang dapat disesuaikan dengan perubahan iklim; dan f Dapat digunakan sebagai model untuk memfasilitasi perubahan kelompok vegetasi menjadi kelompok yang baru (adaptasi, seperti teori perubahan vegetasi melalui perladangan berpindah-pindahyangteratur.

  7. Improved DC Gun and Insulator Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, Michael [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2015-01-11

    Many user facilities such as synchrotron radiation light sources and free electron lasers rely on DC high voltage photoguns with internal field gradients as high as 10 to 15 MV/m. These high gradients often lead to field emission which poses serious problems for the photocathode used to generate the electron beam and the ceramic insulators used to bias the photocathode at high voltage. Ceramic insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic causing a buildup of charge and eventual puncture, and also because large diameter ceramics are difficult to braze reliably. The lifetimes of photo cathodes inside high current DC guns exhibiting field emission are limited to less than a hundred hours. Reducing the surface gradients on the metals reduces the field emission, which serves to maintain the required ultrahigh vacuum condition. A novel gun design with gradients around 5 MV/m and operating at 350 kV, a major improvement over existing designs, was proposed that allows for the in-situ replacement of photo cathodes in axially symmetric designs using inverted ceramics. In this project, the existing JLAB CEBAF asymmetric gun design with an inverted ceramic support was modeled and the beam dynamics characterized. An improved structure was designed that reduces the surface gradients and improves the beam optics. To minimize the surface gradients, a number of electrostatic gun designs were studied to determine the optimum configuration of the critical electrodes within the gun structure. Coating experiments were carried out to create a charge dissipative coating for cylindrical ceramics. The phase II proposal, which was not granted, included the design and fabrication of an axially symmetric DC Gun with an inverted ceramic that would operate with less than 5 MV/m at 350 kV and would be designed with an in-situ replaceable photo-cathode.

  8. INDUSTRIALISASI DAN TANTANGANNYA PADA SEKTOR PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    Arif Unwanullah

    2015-10-01

    Full Text Available Abstrak: Industrialisasi dan Tantangannya pada Sektor Pendidikan. Sumbangan pendidikan dalam perubahan dan pembangunan masa lalu telah bergeser dengan kemajuan teknoekonomi dan komunikasi. Perubahan yang terjadi telah menggeser tatanan kehidupan dan pandangan masyarakat. Materialisme, kapitalisme, efisiensi, dan efektivitas telah menjadi tujuan dan semangat hidup. Pergeseran pandangan masyarakat telah mengubah pula pandangan keberhasilan dan mutu pendidikan, di mana pendidikan diukur dari keberhasilan dalam keterserapan lulusan dalam dunia kerja, oleh karenanya pendidikan dianalisis dari karakteristik sebagai investasi (capital-investment. Pergeseran makna dan tanggung jawab pendidikan mendorong dunia pendidikan melakukan pembaruan dengan alternatif: membangun pembaruan penalaran warganya menuju pemerdekaan dan pendewasaan, pendidikan dilaksanakan secara komprehensif dan bekerjasama dengan semua pihak secara kemitraan, dan membangun visi pendidikan secara komprehensif dan simultan dengan semua pihak. Kata kunci: perubahan sosial, materialistik, modernisasi dan kapitalis Abstract: Industrialization and its education Sector challenges. Contribution of education has shifted with the progress of technology, economy, and communication. The changes have shifted the society's views. Materialism, capitalism, efficiency, and effectiveness have become of interest and enthusiasm for life. The shift has changed society's view, i.e. the view of success and quality of education, in which education is measured from a rate of the absorption of graduates into labor market, therefore education is analyzed from the characteristics of an investment (capital-investment. A shift in meaning and responsibility of education encourages the education sector to create reformation through these following alternatives: creating new thoughts towards liberation and maturation, implementing education comprehensively and cooperating with all parties in partnership, and creating

  9. Protection of AC and DC Microgrids

    DEFF Research Database (Denmark)

    Beheshtaein, Siavash; Savaghebi, Mehdi; Quintero, Juan Carlos Vasquez

    2015-01-01

    and DC microgrids, and then investigates the existing and promising solutions for the corresponding challenges. To the authors’ knowledge, three parts of smart grids are required to be developed to facilitate implementation of protection scheme in microgrids. The main requirements and open issues......In future, distributed energy resources (RESs) will be utilized at consumption points. As a consequence, power flow and fault current would be bidirectional and topologydependent; and hence the conventional protection strategies would be inefficient. This paper categorizes the main challenges in AC...

  10. Intelligent Power Control of DC Microgrid

    DEFF Research Database (Denmark)

    Hajizadeh, Amin; N. Soltani, Mohsen; Norum, Lars

    2017-01-01

    In this paper, an intelligent power management strategy is proposed for hybrid DC microgrid, including wind turbine, fuel cell and battery energy storage. The considered wind turbine has a permanent magnet synchronous generator (PMSG). In the considered structure, wind turbine operates as the main...... condition and fuel cell will not generate excessive power. The proposed control scheme is based on the fuzzy algorithm. All simulations in variant operational modes are performed by MATLAB/Simulink and results show the effectiveness of the proposed control strategy....

  11. Modelling of dc characteristics for granular semiconductors

    International Nuclear Information System (INIS)

    Varpula, Aapo; Sinkkonen, Juha; Novikov, Sergey

    2010-01-01

    The dc characteristics of granular n-type semiconductors are calculated analytically with the drift-diffusion theory. Electronic trapping at the grain boundaries (GBs) is taken into account. The use of quadratic and linear GB potential profiles in the calculation is compared. The analytical model is verified with numerical simulation performed by SILVACO ATLAS. The agreement between the analytical and numerical results is excellent in a large voltage range. The results show that electronic trapping at the GBs has a remarkable effect on the highly nonlinear I-V characteristics of the material.

  12. Modelling of dc characteristics for granular semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Varpula, Aapo; Sinkkonen, Juha; Novikov, Sergey, E-mail: aapo.varpula@tkk.f [Department of Micro and Nanosciences, Aalto University, PO Box 13500, FI-00076 Aalto, Espoo (Finland)

    2010-11-01

    The dc characteristics of granular n-type semiconductors are calculated analytically with the drift-diffusion theory. Electronic trapping at the grain boundaries (GBs) is taken into account. The use of quadratic and linear GB potential profiles in the calculation is compared. The analytical model is verified with numerical simulation performed by SILVACO ATLAS. The agreement between the analytical and numerical results is excellent in a large voltage range. The results show that electronic trapping at the GBs has a remarkable effect on the highly nonlinear I-V characteristics of the material.

  13. Krmiljenje DC motorja z mikrokrmilnikom ESP32

    OpenAIRE

    Pleterski, Jan

    2017-01-01

    Sodobni mikrokrmilniki z integriranimi brezžičnimi komunikacijskimi moduli omogočajo razvoj novih aplikacij interneta stvari (ang. Internet of Things), kjer do komunikacije pride brez neposrednega človeškega posredovanja. Cilj zaključne naloge je preizkusiti mikrokrmilnik ESP32 Thing, še posebej njegove nove zmožnosti brezžične povezave. Mikrokrmilnik je preizkušan s PID krmiljenjem DC motorja s programiranjem v programskih okoljih Arduino in ESP-IDF. Zaključno delo je osredotočeno predvse...

  14. Power Oscillations Damping in DC Microgrids

    OpenAIRE

    Hamzeh, Mohsen; Ghafouri, Mohsen; Karimi, Houshang; Sheshyekani, Keyhan; Guerrero, Josep M.

    2016-01-01

    This paper proposes a new control strategy for damping of power oscillations in a multi-source dc microgrid. A parallel combination of a fuel cell (FC), a photovoltaic (PV) system and a supercapacitor (SC) are used as a hybrid power conversion system (HPCS). The SC compensates for the slow transient response of the FC stack. The HPCS controller comprises a multi-loop voltage controller and a virtual impedance loop for power management. The virtual impedance loop uses a dynamic droop gain to a...

  15. Classification of electrical discharges in DC Accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Srutarshi, E-mail: sruban.stephens@gmail.com [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Deb, A.K. [Department of Electrical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India); Rajan, Rehim N. [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Kishore, N.K. [Department of Electrical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India)

    2016-08-11

    Controlled electrical discharge aids in conditioning of the system while uncontrolled discharges damage its electronic components. DC Accelerator being a high voltage system is no exception. It is useful to classify electrical discharges according to the severity. Experimental prototypes of the accelerator discharges are developed. Photomultiplier Tubes (PMTs) are used to detect the signals from these discharges. Time and Frequency domain characteristics of the detected discharges are used to extract features. Machine Learning approaches like Fuzzy Logic, Neural Network and Least Squares Support Vector Machine (LSSVM) are employed to classify the discharges. This aids in detecting the severity of the discharges.

  16. Distributed Grid Experiences in CMS DC04

    CERN Document Server

    Fanfani, A; Grandi, C; Legrand, I; Suresh, S; Campana, S; Donno, F; Jank, W; Sinanis, N; Sciabà, A; García-Abia, P; Hernández, J; Ernst, M; Anzar, A; Fisk, I; Giacchetti, L; Graham, G; Heavey, A; Kaiser, J; Kuropatine, N; Perelmutov, T; Pordes, R; Ratnikova, N; Weigand, J; Wu, Y; Colling, D J; MacEvoy, B; Tallini, H; Wakefield, L; De Filippis, N; Donvito, G; Maggi, G; Bonacorsi, D; Dell'Agnello, L; Martelli, B; Biasotto, M; Fantinel, S; Corvo, M; Fanzago, F; Mazzucato, M; Tuura, L; Martin, T; Letts, J; Bockjoo, K; Prescott, C; Rodríguez, J; Zahn, A; Bradley, D

    2005-01-01

    In March-April 2004 the CMS experiment undertook a Data Challenge (DC04). During the previous 8 months CMS undertook a large simulated event production. The goal of the challenge was to run CMS reconstruction for sustained period at 25Hz in put rate, distribute the data to the CMS Tier-1 centers and analyze them at remote sites. Grid environments developed in Europe by the LHC Computing Grid (LCG) and in the US with Grid2003 were utilized to complete the aspects of the challenge. A description of the experiences, successes and lessons learned from both experiences with grid infrastructure is presented.

  17. In vitro propagation of lnula royleana DC

    Directory of Open Access Journals (Sweden)

    Anna Stojakowska

    2011-01-01

    Full Text Available A micropropagation method, through axillary shoot proliferation, was elaborated for Inula royleana DC. (Asteraceae, a medicinal plant native of Himalaya. Primary explants (cotyledonary node explants and secondary explants (node explants of in vitro regenerated shoots of the plant, inoculated on MS medium supplemented with 0.1 μM NAA and 5.0 μM kinetin, regenerated 3.4 ± 1.2 and 5.1 ± 1.9 axillary shoots per explant, respectively. The regenerated shoots were easily rooting and adapting to growth in soil.

  18. Advances in DC photocathode electron guns

    International Nuclear Information System (INIS)

    Dunham M, Bruce; Heartmann, P.; Reza Kazimi; Hongxiu Liu; Poelker, B.M.; Price, J.S.; Rutt, P.M.; Schneider, W.J.; Sinclair K, Charles

    1998-01-01

    At Jefferson Lab, a DC photoemission gun using GaAs and GaAs-like cathodes provides a source of polarized electrons for the main accelerator. The gun is required to produce high average current with long operational lifetimes and high system throughout. Recent work has shown that careful control of the parameters affecting cathode lifetime lead to dramatic improvements in source operation. These conditions include vacuum and the related effect of ion back-bombardment, and precise control of all of the electrons emitted from the cathode. In this paper, the authors will review recent results and discuss implications for future photocathode guns

  19. Advances in DC photocathode electron guns

    International Nuclear Information System (INIS)

    Dunham, B. M.; Hartmann, P.; Kazimi, R.; Liu, H.; Poelker, B. M.; Price, J. S.; Rutt, P. M.; Schneider, W. J.; Sinclair, C. K.

    1999-01-01

    At Jefferson Lab, a DC photoemission gun using GaAs and GaAs-like cathodes provides a source of polarized electrons for the main accelerator. The gun is required to produce high average current with long operational lifetimes and high system throughput. Recent work has shown that careful control of the parameters affecting cathode lifetime lead to dramatic improvements in source operation. These conditions include vacuum and the related effect of ion backbombardment, and precise control of all of the electrons emitted from the cathode. In this paper, we will review recent results and discuss implications for future photocathode guns

  20. Advances in DC photocathode electron guns

    International Nuclear Information System (INIS)

    Dunham, B.M.; Hartmann, P.; Kazimi, R.; Liu, H.; Poelker, B.M.; Price, J.S.; Rutt, P.M.; Schneider, W.J.; Sinclair, C.K.

    1999-01-01

    At Jefferson Lab, a DC photoemission gun using GaAs and GaAs-like cathodes provides a source of polarized electrons for the main accelerator. The gun is required to produce high average current with long operational lifetimes and high system throughput. Recent work has shown that careful control of the parameters affecting cathode lifetime lead to dramatic improvements in source operation. These conditions include vacuum and the related effect of ion backbombardment, and precise control of all of the electrons emitted from the cathode. In this paper, we will review recent results and discuss implications for future photocathode guns. copyright 1999 American Institute of Physics

  1. Electronically commutated DC motor. Elektronisch kommutierter Gleichstrommotor

    Energy Technology Data Exchange (ETDEWEB)

    Gruenleitner, H; Schalk, K; Koegler, G

    1981-08-13

    The purpose of the invention is to create a controlled and electronically commutated DC motor, so that the braking current regulator does not act with the frequency motor current regulator, where an additional switch is not required to decouple the braking current transistor while running, and where the reference value of braking current need not be greater than the reference value of motor current. According to the invention, this problem is solved by a connection, by which, while running, the braking current regulator is interlocked out by means of the output signal of the motor current regulator. A cheap diode and the associated wiring are all that is required for the interlock.

  2. Desain dan Uji Kinerja Fungsional Sistem Penggerak dan Kendali ROVERGARD

    Directory of Open Access Journals (Sweden)

    Moh Fikri Pomalingo

    2017-04-01

    Full Text Available Abstract The high population rate has an impact on increasing of land function change from agricultural land become housing and commercial building. As a result, it is difficult to get land for planting in the urban area. Therefore, this research is aimed to design equipment that can be used for planting in the narrow land using vertical gardening. This paper will report about design and functional testing of drive and control system on ROVERGARD. Drive system is based on water pump with additional gear train and chainsprocket mechanism. Control system use was on open loop type based on timer. The performance test of drive system was focused on electrical energy consumption and rotational speed of the system that was measured by multifunctional mini ammeter and tachometer. The control system was tested during 4 days, to evaluate their performances between set point and actual timing while filling water tank and rotate the system at maximal load condition. Electrical power consumption was 208 W at average rotational speed 2703 rpm. Increasing load caused an increase of energy consumption but made the drive rotation decline. The position control performance had on position error around 50 cm. Consequently, setting time on timer must be adjusted. Abstrak Laju pertumbuhan penduduk yang tinggi, mengakibatkan tingginya alih fungsi lahan pertanian menjadi bangunan perumahan dan komersial. Masalah ini mengakibatkan sulitnya mencari lahan pertanian di daerah padat penduduk khususnya perkotaan. Oleh karena itu perlu dirancang sebuah alat yang dapat digunakan untuk bercocok tanam di lahan sempit. Tujuan dari penelitian ini adalah mendesain dan menguji sistem penggerak dan kendali pada ROVERGARD. Sistem penggerak berasal dari pompa air yang dimodifikasi. Sedangkan sistem kendali menggunakan tipe open loop berbasis waktu dimana timer sebagai komponen utamanya. Pengujian kinerja penggerak difokuskan pada konsumsi listrik dan rpm yang diukur menggunakan

  3. KONTEKS DAN KONSTRUKSI SOSIAL MENGENAI KEMATIAN ELEKTIF ( EUTHANASIA ∗

    Directory of Open Access Journals (Sweden)

    Helly Prajitno Soetjipto

    2015-09-01

    konteks sosial dan konstruksi sosial kematian. Euthanasia didiskusikan di dalam suatu kerangka pikir yang mencoba memberi perhatian kepada hal-hal yang kontekstual dan interpretatif fenomena sosial suatu proses kematian dan kejadian kematian

  4. DIAGNOSIS DAN PENATALAKSANAAru LIMFOMA ORtsITA

    Directory of Open Access Journals (Sweden)

    Ardizal Rahman

    2014-12-01

    Full Text Available Limfoma orbita merujuk pada limfoma yang terjadi di konjungtiva, kelenjar lakrimal, palpebradan otot-otot ekstraokular. Limfoma primer non-Hodgkin (NHL dari orbita dapat ditemukanpada hanya 1o/o dari semua limforna non-Hodgkin. Anaiisis mutasi somatik pada regiovariabel (V dari immunoglobulin (ig dan segmen gen rantai berat (H telah menunjukkanperan dari stimulasi antigen kronik pada patogenesis limfoma /nucosa-associated lymphoidflssue (MALT. Patogen mikroba seperti Helicobacter pylaridan Chlamydia pneumonia dapaimendasari proses inflamasi dan pada akhirnya memicu akuisisi MALT juga memainkanperan penting dalam tranformasi maligna dan ekspansi klonal lanjutan limfoma. Penentuanstadium kanker sangat penting karena akan menentukan terapi apa yang akan diberikan dankemungkinan remisi dan prognosisnya. Berdasarkan sistem stadium Ann-Arbor, limfoma yangterbatas di orbita disebut sebagai stadium l, keterlibatan struktur sekitar (sinus paranasal,tonsil, dan hidung menjadikannya stadium ll. Stadium lll adalah penyakit nodal abdominaldibawah diafragma dan stadium lV merujuk pada keterlibatan yang tersebar dari satu ataulebih lokasi ekstranodal (hepar, sum-sum tulang atau sistem saraf pusat. Mayoritas pasiendatang dengan keluhan massa konjungtiva berwarna pink (91%, diikuti hiperemis konjungtiva(32%, propiosis (27%, massa palpebra atau orbita (19"fi, penurunan visus dan ptosis (6%,dan diplopia(2%. Bilateralitas terjadi pada 10% hingga 15% kasus dimana 80 % terjadisecarasimultan sedangkan 20% merupakan kondisi yang berurutan. Penilaian lanjut untuk stagingyang akurat dan perencanaan terapitermasuk anamnesis yang lengkap dan pemeriksaan fisik,pemeriksaan laboratorium rutin, elektroforesis protein sei-um, LDH serum, Fr-mikroglobulin,rontgen thoraks, CT scan thoraks, abdornen, dan pelvis, dan biopsisum-sum tulang. Diagnosapositif harus berdasarkan pada perneriksaan histologik dari sampeltumor yang memadai yangdiperoleh dengan biopsiorbita. Beberapa kriteria

  5. TRANSFORMASI ORGANISASIONAL DAN MSDM: HAMBATAN DAN IMPLIKASINYA PADA REKRUTMEN DAN SELEKSI

    Directory of Open Access Journals (Sweden)

    Licen Indahwati Darsono

    2002-01-01

    Full Text Available Rapid change of environment is an external force that causes the organization to transform. Fundamentally, the main purpose of the transformation is to change the organizational structure to be more flexible and competitive with fewer hierarchial levels, managers, and employees. The transformation needs to be radical, causing resistance from the organization's members. Their resistance can cause the transformation to fail, therefore organization must find ways to lessen this resistance. First, organization must learn about the diversity of its members' cultures and values. Second, organization must build its own organizational culture which can support the success of the transformation, by communicating it with the members of the organization. To support organizational culture building efforts, it needs changes in human resources practices, especially recruitment and selection. Abstract in Bahasa Indonesia : Perubahan yang cepat dalam lingkungan merupakan kekuatan eksternal yang mengakibatkan transformasi dalam sebuah organisasi. Pada dasarnya, tujuan utama dari transformasi tersebut adalah merubah struktur organisasi agar menjadi lebih fleksibel dan mampu bersaing, dengan tingkat structural yang sedikit, serta jumlah manajer dan karyawan yang lebih kecil. Transformasi tersebut harus menyeluruh, dan hal ini dapat menyebabkan resistensi dari para anggota organisasi yang memperhambat perubahan tersebut. Resistensi itu bisa menyebabkan perubahan tersebut batal, oleh karena itu organisasi harus mencari jalan untuk mengurangi hambatan-hambatan tersebut. Pertama, organisasi harus belajar keanekaragaman dari budaya dan nilai anggotanya. Kedua, organisasi harus mengembangkan budaya organisasi sendiri melalui komunikasi yang baik dengan anggotanya. Untuk mendukung usaha mengembangkan budaya organisasi, harus ada perubaban pada kebijakan sumber daya manusia, terutama dalam rekrutmen dan seleksi karyawan. Kata kunci: transformasi, resistensi, budaya

  6. Perbandingan Akurasi Pengukuran Suhu Dan Kelembaban Antara Sensor DHT11 Dan DHT22

    OpenAIRE

    Saptadi, Arief Hendra

    2014-01-01

    Suhu dan kelembaban merupakan dua objek pengukuran yang acapkali terdapat di dalam sistem akuisisi data. Terdapat banyak piranti sensor yang berfungsi untuk mengukur dua objek tersebut dan akurasi merupakan salah satu parameter yang dapat digunakan untuk memilihnya. DHT11 dan DHT22 adalah sensor seri DHT dari Aosong Electronics yang dapat melakukan pengukuran suhu dan kelembaban secara serempak dengan keluaran digital. Informasi tentang akurasi terdapat di dalam lembar data keduanya. Kendati ...

  7. Pertumbuhan dan Mutu Fisik Bibit Jabon (Anthocephalus Cadamba Miq.) di Polibag dan Politub

    OpenAIRE

    Junaedi, Ahmad

    2010-01-01

    Informasi pertumbuhan dan mutu fisik bibit jabon (Anthocephalus cadamba Miq.) di wadah bibit dengan volume yang berbeda diperlukan sebagai bagian yang akan diperhitungkan dalam pemilihan wadah bibit yang akan digunakan. Penelitian ini dilakukan untuk mengetahui pertumbuhan dan mutu fisik bibit jabon yang disapih pada wadah bibit polibag (volume 300 cm3) dan politub (volume 60 cm3). Tahapan penelitian meliputi : pembibitan serta pengamatan pertumbuhan dan penilaian mutu fisik bibit jabon yang ...

  8. Dampak belanja irigasi dan jaringan terhadap output PDRB sektor pertanian dan pertumbuhan ekonomi Kota Jambi

    OpenAIRE

    Aminah, Siti; Parmadi, Parmadi

    2018-01-01

    Penelitian ini bertujuan untuk menganalisis perkembangan Belanja irigasi dan jaringan serta perkembangan output GDP sektor pertanian Kota Jambi selama periode tahun 2005-2015 dan menganalisis pengaruh belanja irigasi dan jaringan terhadap  GDP Output sektor pertanian dan pertumbuhan ekonomi Kota Jambi. Hasil penelitian menunjukkan Selama periode penelitian tahun 2005-2015 dengan rata-rata pertumbuhan 61,98%, nilai rata-rata PDRB harga berlaku Kota Jambi sebesar 157.601,68 dalam juta rupi...

  9. Bifurcation Analysis of a DC-DC Bidirectional Power Converter Operating with Constant Power Loads

    Science.gov (United States)

    Cristiano, Rony; Pagano, Daniel J.; Benadero, Luis; Ponce, Enrique

    Direct current (DC) microgrids (MGs) are an emergent option to satisfy new demands for power quality and integration of renewable resources in electrical distribution systems. This work addresses the large-signal stability analysis of a DC-DC bidirectional converter (DBC) connected to a storage device in an islanding MG. This converter is responsible for controlling the balance of power (load demand and generation) under constant power loads (CPLs). In order to control the DC bus voltage through a DBC, we propose a robust sliding mode control (SMC) based on a washout filter. Dynamical systems techniques are exploited to assess the quality of this switching control strategy. In this sense, a bifurcation analysis is performed to study the nonlinear stability of a reduced model of this system. The appearance of different bifurcations when load parameters and control gains are changed is studied in detail. In the specific case of Teixeira Singularity (TS) bifurcation, some experimental results are provided, confirming the mathematical predictions. Both a deeper insight in the dynamic behavior of the controlled system and valuable design criteria are obtained.

  10. Direct switching control of DC-DC power electronic converters using hybrid system theory

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, J.; Lin, F. [Wayne State Univ., Detroit, MI (United States). Dept. of Electrical and Computer Engineering; Wang, C. [Wayne State Univ., Detroit, MI (United States). Dept. of Electrical and Computer Engineering; Wayne State Univ., Detroit, MI (United States). Div. of Engineering Technology

    2010-07-01

    A direct switching control (DSC) scheme for power electronics converters was described. The system was designed for use in both traditional and renewable energy applications as well as in electric drive vehicles. The proposed control scheme was based on a detailed hybrid system converter model that used model predictive control (MPC), piecewise affine (PWA) approximations and constrained optimal control methods. A DC-DC converter was modelled as a hybrid machine. Switching among different modes of the DC-DC converter were modelled as discrete events controlled by the hybrid controller. The modelling scheme was applied to a Buck converter. The DSC was used to control the switch of the power converter based on a hybrid machine model. Results of the study showed that the method can be used to regulate output voltage and inductor currents. The method also provides fast transient responses and effectively regulates both currents and voltage. The controller can be used to provide immediate responses to dynamic disturbances and output voltage fluctuations. 23 refs., 7 figs.

  11. A review on DC/DC converter architectures for power fuel cell applications

    International Nuclear Information System (INIS)

    Kolli, Abdelfatah; Gaillard, Arnaud; De Bernardinis, Alexandre; Bethoux, Olivier; Hissel, Daniel; Khatir, Zoubir

    2015-01-01

    Highlights: • Different DC/DC power converter topologies for Fuel Cell systems are presented. • Advantages and drawbacks of the DC/DC power converter topologies are detailed. • Wide-BandGap semiconductors are attractive candidates for design of converters. • Wide-BandGap semiconductors improve efficiency and thermal limits of converters. • Different semiconductor technologies are assessed. - Abstract: Fuel cell-based power sources are attractive devices. Through multi-stack architecture, they offer flexibility, reliability, and efficiency. Keys to accessing the market are simplifying its architecture and each components. These include, among others, the power converter enabling the output voltage regulation. This article focuses on this specific component. The present paper gives a comprehensive overview of the power converter interfaces potentially favorable for the automotive, railways, aircrafts and small stationary domains. First, with respect to the strategic development of a modular design, it defines the specifications of a basic interface. Second, it inventories the best architecture opportunities with respect to these requirements. Based on this study, it fully designs a basic module and points out the outstanding contribution of the new developed silicon carbide switch technology. In conclusion, this review article exhibits the importance of choosing the right power converter architecture and the related technology. In this context it is highlighted that the output power interface can be efficient, compact and modular. In addition, its features enable a thermal compatibility with many ways of integrating this component in the global fuel cell based power source.

  12. Control and modulation for loss minimization for dc/dc converters in wind farm

    DEFF Research Database (Denmark)

    Dincan, Catalin Gabriel; Kjær, Philip Carne

    2016-01-01

    For a DC wind turbine, a single phase series-resonant converter for unidirectional power is studied. This paper aims to identify and compare impact on electrical losses and component ratings from the choice of three candidate control strategies. The evaluation is purely based on circuit simulatio...

  13. A Four-Phase High Voltage Conversion Ratio Bidirectional DC-DC Converter for Battery Applications

    Directory of Open Access Journals (Sweden)

    Li-Kun Xue

    2015-06-01

    Full Text Available This study presents a four-phase interleaved high voltage conversion ratio bidirectional DC-DC converter circuit based on coupled inductors and switched capacitors, which can eliminate the defects of conventional high voltage conversion ratio bidirectional DC-DC converters in terms of high-voltage/current stress, less efficiency and low-power limitation. Parallel channels are used to reduce current stress at the low-voltage side and series connected switched capacitors are used to enlarge voltage conversion ratio, reduce voltage stress and achieve auto current sharing. This paper proposes the operation principle, feature analysis and optimization design considerations. On this basis the objectives of high voltage conversion ratio, low voltage/current stress, high power density, high efficiency and high-power applications can be achieved. Some experimental results based on a 500 W prototype converter (24 V to 48 V at low-voltage side, 400 V at high-voltage side are given to verify the theoretical analysis and the effectiveness of the proposed converter.

  14. Static and Dynamic Characteristics of DC-DC Converter Using a Digital Filter

    Science.gov (United States)

    Kurokawa, Fujio; Okamatsu, Masashi

    This paper presents the regulation and dynamic characteristics of the dc-dc converter with digital PID control, the minimum phase FIR filter or the IIR filter, and then the design criterion to improve the dynamic characteristics is discussed. As a result, it is clarified that the DC-DC converter using the IIR filter method has superior performance characteristics. The regulation range is within 1.3%, the undershoot against the step change of the load is less than 2% and the transient time is less than 0.4ms with the IIR filter method. In this case, the switching frequency is 100kHz and the step change of the load R is from 50 Ω to 10 Ω. Further, the superior characteristics are obtained when the first gain, the second gain and the second cut-off frequency are relatively large, and the first cut-off frequency and the passing frequency are relatively low. Moreover, it is important that the gain strongly decreases at the second cut-off frequency because the upper band pass frequency range must be always less than half of the sampling frequency based on the sampling theory.

  15. Exploration of Charge Recycling DC-DC Conversion Using a Switched Capacitor Regulator

    Directory of Open Access Journals (Sweden)

    Mircea R. Stan

    2013-07-01

    Full Text Available The increasing popularity of DVFS (dynamic voltage frequency scaling schemes for portable low power applications demands highly efficient on-chip DC-DC converters. The primary aim of this work is to enable increased efficiency of on-chip DC-DC conversion for near-threshold operation of multicore chips. The idea is to supply nominal (high off-chip voltage to the cores which are then “voltage-stacked” to generate the near-threshold (low voltages based on Kirchhoff’s voltage law through charge recycling. However, the effectiveness of this implicit down-conversion is affected by the current imbalance among the cores. The paper presents a design methodology and optimization strategy for highly efficient charge recycling on-chip regulation using a push-pull switched capacitor (SC circuit. A dual-boundary hysteretic feedback control circuit has been designed for stacked loads. A stacked-voltage domain with its self-regulation capability combined with a SC converter has shown average efficiency of 78%–93% for 2:1 down-conversion with ILoad (max of 200 mA and workload imbalance varying from 0–100%.

  16. Design of interleaved multilayer rosen type piezoelectric transformer for high voltage dc/dc applications

    DEFF Research Database (Denmark)

    Rødgaard, Martin Schøler; Andersen, Thomas; Meyer, Kaspar Sinding

    2012-01-01

    Research and development within piezoelectric transformer (PT) based converters are rapidly increasing as the technology is maturing and starts to prove its capabilities. Especially for high voltage and high step-up applications, PT based converters have demonstrated good performance and DC...

  17. High Current Planar Transformer for Very High Efficiency Isolated Boost DC-DC Converters

    DEFF Research Database (Denmark)

    Pittini, Riccardo; Zhang, Zhe; Andersen, Michael A. E.

    2014-01-01

    This paper presents a design and optimization of a high current planar transformer for very high efficiency dc-dc isolated boost converters. The analysis considers different winding arrangements, including very high copper thickness windings. The analysis is focused on the winding ac-resistance a......This paper presents a design and optimization of a high current planar transformer for very high efficiency dc-dc isolated boost converters. The analysis considers different winding arrangements, including very high copper thickness windings. The analysis is focused on the winding ac......-resistance and transformer leakage inductance. Design and optimization procedures are validated based on an experimental prototype of a 6 kW dcdc isolated full bridge boost converter developed on fully planar magnetics. The prototype is rated at 30-80 V 0-80 A on the low voltage side and 700-800 V on the high voltage side...... with a peak efficiency of 97.8% at 80 V 3.5 kW. Results highlights that thick copper windings can provide good performance at low switching frequencies due to the high transformer filling factor. PCB windings can also provide very high efficiency if stacked in parallel utilizing the transformer winding window...

  18. Light weight, high power, high voltage dc/dc converter technologies

    Science.gov (United States)

    Kraus, Robert; Myers, Ira; Baumann, Eric

    1990-01-01

    Power-conditioning weight reductions by orders of magnitude will be required to enable the megawatt-power-level space systems envisioned by the Strategic Defense Initiative, the Air Force, and NASA. An interagency program has been initiated to develop an 0.1-kg/kW dc/dc converter technology base for these future space applications. Three contractors are in the first phase of a competitive program to develop a megawatt dc/dc converter. Researchers at NASA Lewis Research Center are investigating innovative converter topology control. Three different converter subsystems based on square wave, resonant, and super-resonant topologies are being designed. The components required for the converter designs cover a wide array of technologies. Two different switches, one semiconductor and the other gas, are under development. Issues related to thermal management and material reliability for inductors, transformers, and capacitors are being investigated in order to maximize power density. A brief description of each of the concepts proposed to meet the goals of this program is presented.

  19. Model Based Optimization of Integrated Low Voltage DC-DC Converter for Energy Harvesting Applications

    Science.gov (United States)

    Jayaweera, H. M. P. C.; Muhtaroğlu, Ali

    2016-11-01

    A novel model based methodology is presented to determine optimal device parameters for the fully integrated ultra low voltage DC-DC converter for energy harvesting applications. The proposed model feasibly contributes to determine the maximum efficient number of charge pump stages to fulfill the voltage requirement of the energy harvester application. The proposed DC-DC converter based power consumption model enables the analytical derivation of the charge pump efficiency when utilized simultaneously with the known LC tank oscillator behavior under resonant conditions, and voltage step up characteristics of the cross-coupled charge pump topology. The verification of the model has been done using a circuit simulator. The optimized system through the established model achieves more than 40% maximum efficiency yielding 0.45 V output with single stage, 0.75 V output with two stages, and 0.9 V with three stages for 2.5 kΩ, 3.5 kΩ and 5 kΩ loads respectively using 0.2 V input.

  20. Directly coupled YBCO dc SQUID magnetometers

    International Nuclear Information System (INIS)

    Petersen, P.R.E.; Shen, Y.Q.; Holst, T.; Larsen, B.H.; Sager, M.P.; Bindslev Hansen, J.

    1999-01-01

    YBa 2 Cu 3 O 7- x magnetometers have been made on 10mmx10mm MgO substrates by directly coupling the magnetometer pick-up loop to a dc SQUID with narrow strip lines. The dc SQUIDs were made with YBa 2 Cu 3 O 7-x step-edge Josephson junctions. The layout of the magnetometer pick-up loop was chosen as a compromise between maximizing the loop effective area and minimizing the loop inductance. The SQUID was designed to have L S ∼100 pH in order to obtain β L =2I 0 L S /Φ 0 approx.= 1 with the single-junction critical current I 0 ∼10 μA. We have made magnetometers with white noise levels down to 55 fT Hz -1/2 and a 1/f knee at 1 Hz (ac biased). Noise measurements were made on a field-cooled magnetometer. The noise measured at 1 Hz when cooled in 'zero field' was 175 fT Hz -1/2 . When cooled in magnetic fields of B = 50 μT and B = 100 μT we measured the noise at 1 Hz to be 430 fT Hz -1 2 and 1.3 pT Hz -1/2 , respectively. (author)

  1. Process of DC-SC photoinjector

    International Nuclear Information System (INIS)

    Xiang Rong; Zhao Kui; Quan Shengwen; Ding Yuantao; Zhang Baocheng; Lu Xiangyang; Lin Lin; Wang Lifang; Chen Jiaer

    2004-01-01

    The DC-SC photoinjector at Beijing University is designed to provide an electron beam of average current 1 mA with the energy of 2-3 MeV and normalized rms transverse emittance of 3πmm-mrad at an 81.25 MHz repetition rate. The test facility has been completely installed in our lab. In this paper some of the ongoing experimental activities are summarized. First results from the cold test of superconducting cavity have been presented. According to the results, authors have improved the main coupler to repress the multipacting. The beam test of 100 μA on the DC gun has been done, photocathode preparation chamber can produce Cs 2 Te cathodes, and the laser system can provide laser pulse with 266 nm wavelength. The time synchronization between laser and RF power has been achieved by a timing stabilizer. A new method using 'due image pattern' of Cherenkov radiation will be commissioned to measure beam emittance. The next step is under way, to prepare all the equipment for the beam tests. (authors)

  2. Discussion - a high voltage DC generator

    International Nuclear Information System (INIS)

    Bhagwat, P.V.; Singh, Jagir; Hattangadi, V.A.

    1993-01-01

    One of the requirements for a high power ion source is a high voltage, high current DC generator. The high voltage, high current generator, DISCATRON, presently under development in our laboratory is a rotating disc type electrostatic generator similar in design to the one reported by A. Isoya et al. (1985). It is compact and rugged electrostatic DC generator based on the principle of induction charging by pellet chains used in the pelletron accelerator. It is, basically, a constant-current device with little stored energy, so that, in case of a breakdown, damage to the equipment connected to the output terminals is minimal. Since the present generator is only a proto-type, meant for a study of the practical difficulties that would be encountered in its manufacture, the output voltage and current specified has been kept quite modest viz., 300 kV at 500 μA, maximum. Some results of the preliminary tests carried out with this generator are described. (author). 4 figs

  3. Ac and dc motor flooding times

    International Nuclear Information System (INIS)

    Crowley, D.A.; Hinton, J.H.

    1988-01-01

    Reactor safety studies, such as the emergency cooling system (ECS) limits analyses and the probabilistic risk assessment, require that the flood-out times be calculated for the ac and dc motors at the -40 foot level. New calculations are needed because dams of an improved design have been installed between the pump room and motor room, and because updated leak rate calculations have shown that the maximum possible leak rate is larger than that which had been previously calculated. The methodology for calculating the motor flood-out times has also been improved. A computer program has been written to calculate flood-out times for various leak rates and sump pump operabilities. For ECS limits analyses, the worst case dc motor flood-out times are 161 and 297 seconds in LKC and P-areas, respectively. These times are for a 135,468 gpm leak that first flows to the motor room and all of the sump pumps are off

  4. Development of innovative superconducting DC power cable

    Energy Technology Data Exchange (ETDEWEB)

    Matsushita, Teruo; Kiuchi, Masaru [Dept. of Computer Science and Electronics Kyushu Institute of Technology, Iizuka (Japan)

    2017-09-15

    It is required to reduce the cost of superconducting cable to realize a superconducting DC power network that covers a wide area in order to utilize renewable energy. In this paper a new concept of innovative cable is introduced that can enhance the current-carrying capacity even though the same superconducting tape is used. Such a cable can be realized by designing an optimal winding structure in such a way that the angle between the tape and magnetic field becomes small. This idea was confirmed by preliminary experiments for a single layer model cable made of Bi-2223 tapes and REBCO coated conductors. Experiments of three and four layer cables of practical sizes were also done and it was found that the current-carrying capacity increased as theoretically predicted. If the critical current properties of commercial superconducting tapes are further improved in a parallel magnetic field, the enhancement will become pronounced and this technology will surely contribute to realization of superconducting DC power network.

  5. Wacana Penjarahan Dan Kekerasan Simbolik Terhadap Petani

    Directory of Open Access Journals (Sweden)

    Agus Sudibyo

    2002-01-01

    Full Text Available Perlawanan kaum petani sudah lama terjadi dalam konteks sejarah hubungan antara si kaya dan si miskin dan antara kaum petani dan negara. Persoralannya selalu bahwa negara, aparat keamanan dan pemilik modal telah mengambil alih secara paksa surplus ekonomi dari petani. Mereka bekerja sama dalam aksi penyerobotan tanah petani, pendirian perkebunan-perkebunan dan dalam menghadapi gerakan protes petani. Negara bukan hanya menghadapi gerakan perlawanan petani dengan represi-represi fisik. Secara sistematis negara juga melakukan propaganda dengan menciptakan gambaran-gambaran yang unfavourable tentang petani pelaku penjarahan dalam berbagai representasi wacana. Dalam batas tertentu, media massa justru memperkuat kecenderungan ini dengan menonjolkan dimensi kekerasan, pemberontakan dan anarkisme dalam mewacanakan aksi-aksi penjarahan petani.

  6. Motivasi, Kebiasaan, dan Keamanan Penggunaan Internet

    Directory of Open Access Journals (Sweden)

    Zinggara Hidayat

    2017-01-01

    Full Text Available Abstract: This study investigates motivation, habits, and security of internet use by high schools and universities students in Jakarta, Bogor, Depok, Tangerang, and Bekasi. This descriptive and quantitative reasearch uses survey method. The findings of the study show that the strongest motivation is to show self existence, entertainment, and academic purposes. At some points, the habit of using the internet also makes the students face some risks such as verbal and nonverbal abuses, bullying, pornoghrapy, account hacking, and the risk of interaction with unknown parties. Abstrak: Penelitian ini menyelidiki motivasi, kebiasaan, dan keamanan penggunaan internet di antara siswa sekolah menengah atas dan universitas di Jakarta, Bogor, Depok, Tangerang, dan Bekasi. Penelitian deskriptif kuantitatif ini menggunakan metode survei. Hasil penelitian menunjukkan bahwa motivasi paling kuat adalah untuk memperlihatkan eksistensi diri, pencarian hiburan, dan penyelesaian tugas akademis. Kebiasaan penggunaan internet oleh pelajar dan mahasiswa menghadapi beberapa risiko, seperti kekerasan verbal dan nonverbal,

  7. SOSIAL MEDIA DAN PERUBAHAN INDEKS PRESTASI MAHASISWA

    Directory of Open Access Journals (Sweden)

    Risnah Risnah

    2015-12-01

    Tujuan dari penelitian ini adalah mengetahui jumlah mahasiswa semester II, IV, dan VI Jurusan Keperawatan yang menggunakan internet secara aktif dan karak-teristiknya, membandingkan hasil belajar mahasiswa semester II-III, IV-V, dan VI-VII Jurusan Keperawatan, dan mengetahui pengaruh sosial media (facebook dan twitter terhadap perubahan indeks prestasi mahasiswa, dengan jumlah res-ponden sebanyak 150 orang. Penelitian ini adalah deskriptif dengan desain pene-litian kausal. Pengumpulan data dengan menggunakan instrumen berupa kuesio-ner, dengan jumlah responden sebanyak 150 orang. Adapun hasil penelitian me-nunjukkan bahwa indeks prestasi mahasiswa dengan penggunaan sosial media umumnya responden menyatakan sosial media tidak mempengaruhi indeks prestasi. Dari hasil analisis uji statistik diperoleh terdapat pengaruh antara sosial media (facebook dan twitter dengan indeks prestasi. Dengan begitu, penggunaan sosial media harus digunakan sebagaimana mestinya, agar mahasiswa/i yang ak-tif pengunaan sosial media tidak mempengaruhi indeks prestasinya.

  8. Persepsi Santri dan Kiai terhadap Pluralisme Agama di Pendidikan Ulama Tarjih Muhammadiyah (PUTM dan Aswaja Nusantara Yogyakarta

    Directory of Open Access Journals (Sweden)

    Zainal Arifin

    2017-05-01

    Abstrak: Perdebatan pluralisme agama masih mengemuka dalam konteks masyarakat majemuk di Nusantara. Bahkan, tidak jarang menimbulkan konflik dan perang pemikiran. Menarik melihat perspektif kiai dan santri Muhammadiyah dan NU terhadap isu pluralisme melalui praktik pendidikan di Ulama Tarjih Muhammadiyah (PUTM Yogyakarta dan Pondok Pesantren Aswaja Nusantara Yogyakarta yang dianggap representatif karena membawa muatan konsep, ide dan paradigma dari Muhammadiyah dan NU. Penelitian ini bersifat kualitatif,  data diperoleh dari wawancara dan studi kepustakaan dengan saling memberikan verifikasi, koreksi dan pelengkap. Hasil penelitian ini, PUTM dan Pesantren Aswaja Nusantara memiliki konsep yang sama dalam memegang teguh akidah, yakni sikap eksklusif dan menolak pluralisme secara teologis namun menerimanya secara sosiologis. Sehingga, paradigma dari dua lembaga tersebut merepresentasikan dari paradigma Muhammadiyah dan NU dalam merespon fenomena pluralisme agama dan budaya.

  9. VAKSIN DENGUE DAN PERKEMBANGANNYA SAAT INI DAN DI MASA MENDATANG

    Directory of Open Access Journals (Sweden)

    Triwibowo Ambar Garjito

    2012-09-01

    Full Text Available Dengue virus merupakan salah satu virus anggota dari famili Flaviviridae yang sejak tahun 1956 telah dikenal dapat menimbulkan demam dengue maupun demam berdarah dengue (DBD. Penyakit yang ditularkan oleh nyamuk Aedes aegypti ini diperkirakan telah menjangkiti pada selatar 50-100 juta manusia dengan 500.000 kasus di antaranya dalam manifestasi yang ganas yang dikenal sebagai dengue haemorrhagic fever dan dengue shock syndrome dan 25.000 di antaranya berakibat fatal (meninggal. Saat ini pengembangan vaksin merupakan salah satu solusi yang diharapkan dapat menekan penyebaran penyakit tersebut. E (envelope merupakan salah satu bagian dari protein struktural virus yang sangat penting dalam pengembangan vaksin, yaitu sebagai badan yang memproduksi antibodi netralisasi untuk protein. Non-struktural protein l juga telah diketahui sebagai salah satu komponen penting dalam pengembangan vaksin oleh karena kemampuannya untuk dapat diekspresi pada permukaan sel yang diinfeksi yang dapat menjadi target untuk immune cytolisis. Ada dua pendekatan yang digunakan dalam memproduksi suatu vaksin dengue, yaitu: a. Vaksin hidup yang telah dilemahkan (live attenuated vaccine: b. Vaksin hasil rekayasa (engineered vaccine. Penelitian terhadap vaksin DENV baik rekombinan maupun non-rekombinan yang didasarkan pada uji virus telah dilakukan secara terus-menerus baik pada monyet dan manusia. Sampai saat ini telah dikembangkan sejumlah kandidat vaksin DENV yang berdasar pada tetravalent virus dengue, yaitu a. vaksin konvensional, b. vaksin dengue rekombinan berdasar pada flavivirus, c. vaksin intertypic chimeric, d. vaksin chimerivac, e. vaksin dengue rekombinan menggunakan vector non-ftavivirus dan f. vector adenovirus. Namun demikian, sampai sekarang belum ada vaksin yang siap digunakan untuk menangkal infeksi ke empat serotype virus dengue, sehingga masih diharapkan untuk pengembangan virus lebih lanjut.   Kata kunci: Aedes aegypti, dengue virus, vaksin dengue.

  10. BAHAYA LATEN INFEKSI GONORE DAN KLAMIDIA DI ASIA SELATAN & ASIA TENGGARA, DI INDONESIA DAN KOTA MANADO

    Directory of Open Access Journals (Sweden)

    Aron Pirade

    2014-04-01

    menempati urutan tertinggi. Wilayah Asia Selatan dan Asia Timur-Selatan (juga disebut Asia Tenggara adalah wilayah dengan prevalensi Gonore dan Klamidia terbesar. Prevalensi Gonore di tahun 1995 dan 1999 yaitu 29.11 dan 27.2 juta penduduk wilayah Asia Selatan dan Asia Tenggara. Klamidia, di tahun 1995 dan tahun 1999 yaitu 40.48 dan 42.89 juta penduduk wilayah Asia Selatan dan Asia Tenggara. Di Indonesia sendiri, pada 11 area penelitian menunjukkan bahwa prevalensi Gonore dalam wilayah Indonesia menunjukkan rata-rata prosentasenya 20%-40% dari keseluruhan STI pada wanita beresiko tinggi terkena STI. Sedangkan infeksi oleh Klamidia prosentasenya 15%- 45% dari keseluruhan STI pada wanita beresiko tinggi terkena penyakit kelamin. Prosentase Gonore dan Klamidia di Kota Manado rata-rata 15-30%. Tingginya prevalensi infeksi Gonore dan Klamidia di Asia Tenggara, ternyata diikuti juga dengan tingginya perkembangan infeksi Gonore dan Klamidia di Indonesia dan Kota Manado.

  11. NCEP ATP III dan Framingham score

    OpenAIRE

    Hasan, Refli; Fahila, Reny

    2016-01-01

    Laporan ini merupakan Program Pendidikan Kolesterol National yang diperbaharui yaitu pedoman klinis untuk melakukan pengujian kolesterol dan manajemen. ATP III dibuat berdasarkan bukti dan laporan ekstensif yang akan menjadi referensi dan rekomendasi ilmiah. Laporan ATP III dapat dijadikan pedoman untuk pemberian terapi penurun kolesterol yang intensif dalam praktek. Pedoman ini hanya sebagai informasi , tidak dapat mempengaruhi secara mutlak dalam penilaian klinis dokter yang akhirnya menent...

  12. Voltage Control System of A DC Generator Using PLC

    OpenAIRE

    Subrata CHATTOPADHYAY; Sagarika PAL

    2008-01-01

    The voltage control system of a DC generator may suffer from high frequency oscillations without offset or low frequency oscillation with offset. A PID controller can eliminate both these errors. In the present paper, the voltage control system of a DC generator using a PLC based PID controller has been designed. Operation of PLC as a continuous controller has been described and the load characteristic of DC generator with and without controller have been determined experimentally and reporte...

  13. Treatment of hazardous wastes by DC thermal plasma arc discharge

    International Nuclear Information System (INIS)

    Toru, Iwao; Yafang, Liu; Furuta, N.; Tsuginori, Inaba

    2001-01-01

    The temperature of the DC thermal plasma arc discharge is discussed, and examples of the waste treatment for the inorganic compounds such as fly ash, asbestos, and for the organic compounds such as the toxic dioxines and TBT by using the DC plasma arc discharge are shown. In addition, the plasma treatment by using a radiant power emitted from the DC plasma arc discharge is also shown as another new kind of ones. (authors)

  14. Fundamental characteristics of the QFP measured by the dc SQUID

    International Nuclear Information System (INIS)

    Shimizu, N.; Harada, Y.; Miyamoto, N.; Hosoya, M.; Goto, E.

    1989-01-01

    This paper describes the fundamental characteristics of the Quantum Flux Parametron (QFP) measured by a new method in which the output signals of the QFP are detected with a dc SQUID. The dc SQUID linearly and continuously converts the output current of the QFP to voltage, allowing the output signal of the QFP to be measured as the voltage of the dc SQUID. Thus, the fundamental characteristics of the QFP have been experimentally confirmed in detail

  15. Brushless DC motor speed control strategy of simulation research

    Directory of Open Access Journals (Sweden)

    Xiang Wen

    2017-01-01

    Full Text Available In view of the brushless DC motor speed regulation problem, an ideal control strategy is designed. Through the model and analysis of Brushless DC motor, the mathematical model of the brushless DC motor is obtained. By comparing three control strategies of PID control strategy, fuzzy control strategy and fuzzy PID control strategy, PID controller, fuzzy controller and fuzzy PID controller are designed respectively for simulation test. The simulation results show that the fuzzy PID controller has good control effect.

  16. DESAIN, TATA LETAK, DAN KONSTRUKSI TAMBAK

    Directory of Open Access Journals (Sweden)

    Akhmad Mustafa

    2008-12-01

    Full Text Available Komoditas yang umum dibudidayakan di tambak Indonesia adalah udang dan ikan bandeng yang menjadi komoditas unggulan untuk dikembangkan. Salah satu faktor penting yang sangat menentukan keberhasilan usaha budidaya tambak adalah rekayasa tambak yang mencakup disain, tata letak, dan konstruksi tambak. Secara umum, desain petakan tambak merupakan perencanaan bentuk tambak yang meliputi: ukuran panjang dan lebar petakan, kedalaman, ukuran pematang, ukuran berm, dan ukuran saluran keliling, serta ukuran dan letak pintu air. Tata letak suatu unit tambak harus memenuhi tujuan seperti: menjamin kelancaran mobilitas operasional sehari-hari, menjamin kelancaran dan keamanan pasok air, serta pembuangannya, dapat menekan biaya konstruksi tanpa mengurangi fungsi teknis dari unit tambak yang dibangun dan mempertahankan kelestarian lingkungan. Konstruksi tambak yang menggambarkan proses pengerjaan tambak harus disesuaikan dengan desain dan tata letak yang telah ada. Rekayasa tambak diarahkan pada kemampuan untuk menciptakan kondisi yang sesuai dengan keadaan alami yang dituntut oleh organisme akuatik yang dibudidayakan sehingga produktivitas tambak meningkat, efisien secara ekonomis, dan berkelanjutan.

  17. KONTEKTUALISASI DAN (KEMUNGKINAN KONSEKUENSINYA BAGI PSIKOLOGI

    Directory of Open Access Journals (Sweden)

    Prof. Supratiknya

    2015-09-01

    jaran di perguruan tinggi seperti kita kenal sekarang (selanjutnya disebut psikologi, lahir di Jerman pada penghujung abad ke‐19. Selanjutnya psikologi berkembang pesat di Amerika Utara khususnya Amerika Serikat dan negara‐negara lain di Eropa yang lebih dulu mengalami industrialisasi khususnya di Eropa Barat. 1 Alhasil, paling tidak sampai dasawarsa 1980‐an perkembangan dan persebaran psikologi di tingkat global ditandai oleh ketimpangan di antara apa yang oleh Moghaddam (1987 disebut tiga dunia tempat psikologi dikembangkan dan dipraktekkan, disimak antara lain berdasarkan besarnya produksi pengetahuan psikologis yang disebarluaskan melalui penyelenggaraan pendidikan tinggi psikologi maupun lewat publikasi ilmiah berupa baik berkala maupun buku rujukan dan buku teks.

  18. Geometry Optimization of DC/RF Photoelectron Gun

    CERN Document Server

    Chen Ping; Yu, David

    2005-01-01

    Pre-acceleration of photoelectrons in a pulsed, high voltage, short, dc gap and its subsequent injection into an rf gun is a promising method to improve electron beam emittance in rf accelerators. Simulation work has been performed in order to optimize the geometric shapes of a dc/rf gun and improve electron beam properties. Variations were made on cathode and anode shapes, dc gap distance, and inlet shape of the rf cavity. Simulations showed that significant improvement on the normalized emittance (< 1 mm-mrad), compared to a dc gun with flat cathode, could be obtained after the geometric shapes of the gun were optimized.

  19. Troubleshooting of Modulator DC power supply at KOMAC

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Hae Seong; Kim, Han Sung; Kwon, Hyeok Jung; Kim, Seong Gu; Kim, Dae Il; Lee, Seok Geun; Kim, Jae Ha; Seol, Kyeong Tae; Cho, Yong Sub [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The process of solving problems to operate the 2nd converter modulator will be introduced. Also, the PSpice simulation result about the 12-pulse rectifier will be compared with the measurement result. KOMAC (KOrea Multi-purpose Accelerator Complex) has four HVCMs (High Voltage Converter Modulator) which are the power source of nine klystrons. Four HVCMs are already operated since 2013 for operating the 100 MeV linear proton accelerator at KOMAC. This HVCM system includes the 12-pulse rectifier (ac-dc), capacitors bank (dc-link, Pos, Neg) and converter modulator (dc-dc). Especially, the 12-pulse rectifier system receives the power from the utility and converts 3,300 ac voltage to 2,200 dc voltage for supplying the dc power to the capacitors bank. This rectifier system used twelve thyristors for the rectification and applied RC snubber networks to protect the semiconductor switches (thyristors). Since the 2nd modulator dc power supply has troubled, the troubleshooting process conducted by the staves of KOMAC. It takes 3 months to solve the problems because it is not easy to find the faulty wiring. Nevertheless, our staves found the faulty point with a hope to operate the modulator system and the PSpice simulation helps to solve the problems. Using PSpice which is tool for simulating the circuit, the dc power supply abnormal phenomenon was simulated exactly. After corrected the faulty wiring, the modulator dc power supply operated.

  20. Stability of DC Voltage Droop Controllers in VSC HVDC Systems

    DEFF Research Database (Denmark)

    Thams, Florian; Suul, Jon Are; D’Arco, Salvatore

    2015-01-01

    Future multi-terminal HVDC systems are expected to utilize dc voltage droop controllers and several control implementations have been proposed in literature. This paper first classifies possible dc droop implementations in a simple framework. Then, the small-signal stability of a VSC-based conver......Future multi-terminal HVDC systems are expected to utilize dc voltage droop controllers and several control implementations have been proposed in literature. This paper first classifies possible dc droop implementations in a simple framework. Then, the small-signal stability of a VSC...

  1. Design and Implementation of Anti-windup PI Control on DC-DC Bidirectional Converter for Hybrid Vehicle Applications

    Directory of Open Access Journals (Sweden)

    Muh. Zakiyullah Romdlony

    2012-07-01

    Full Text Available Well-regulated DC bus voltage is the important point to guarantee the power demand in hybrid vehicle applications. Voltage regulation can be achieved with control method that build switching signal on DC-DC converter. This paper describes design and small scale experimental results of bus voltage regulation control of the DC-DC bidirectional converter with battery and supercapacitor as energy source. The control system consists of two control loops, the outer loop that get DC bus voltage feedback using PI anti-windup back calculation control method. This outer loop will generate a reference current for the inner loop that implement hysteresis control. The inner control loop will compare that reference curent with the source current obtained from the current sensor. Simulation and experimental results show that bus voltage is well-regulated under the load changes with 1% voltage ripple.

  2. The Chaotic-Based Control of Three-Port Isolated Bidirectional DC/DC Converters for Electric and Hybrid Vehicles

    Directory of Open Access Journals (Sweden)

    Zheng Wang

    2016-01-01

    Full Text Available Three-port isolated (TPI bidirectional DC/DC converters have three energy ports and offer advantages of large voltage gain, galvanic isolation ability and high power density. For this reason this kind of converters are suitable to connect different energy sources and loads in electric and hybrid vehicles. The purpose of this paper is to propose chaotic modulation and the related control scheme for TPI bidirectional DC/DC converters, in such a way that the switching harmonic peaks can be suppressed in spectrum and the conducted electromagnetic interference (EMI is reduced. Two chaotic modulation strategies, namely the continuously chaotic modulation and the discretely chaotic modulation are presented. These two chaotic modulation strategies are applied for TPI bidirectional DC/DC converters with shifted-phase angle based control and phase-shifted PWM control. Both simulation and experiments are given to verify the validity of the proposed chaotic modulation-based control schemes.

  3. PI and Fuzzy Control Strategies for High Voltage Output DC-DC Boost Power Converter - Hardware Implementation and Analysis

    DEFF Research Database (Denmark)

    Padmanaban, Sanjeevi Kumar; Blaabjerg, Frede; Siano, Pierluigi

    2016-01-01

    This paper presents the control strategies by Proportional-Integral (P-I) and Fuzzy Logic (FL) for a DC-DC boost power converter for high output voltage configuration. Standard DC-DC converters are traditionally used for high voltage direct current (HVDC) power transmission systems. But, lack its...... converter with inbuilt voltage-lift technique and overcome the aforementioned deficiencies. Further, the control strategy is adapted based on proportional-integral (P-I) and fuzzy logic, closed-loop controller to regulate the outputs and ensure the performances. Complete hardware prototype of EHV converter...... performances in terms of efficiency, reduced transfer gain and increased cost with sensor units. Moreover, the internal self-parasitic components reduce the output voltage and efficiency of classical high voltage converters (HVC). This investigation focused on extra high-voltage (EHV) DC-DC boost power...

  4. Sliding-Mode Control of a Charger/Discharger DC/DC Converter for DC-Bus Regulation in Renewable Power Systems

    Directory of Open Access Journals (Sweden)

    Sergio Ignacio Serna-Garcés

    2016-03-01

    Full Text Available Stand-alone power systems based on renewable energy sources are used to replace generators based on fossil fuels. Those renewable power systems also require Energy Storage Devices (ESD interfaced by a charger/discharger power converter, which consist of a bidirectional DC/DC converter, and a DC bus. This paper proposes a single sliding-mode controller (SMC for the charger/discharger DC/DC converter to provide a stable DC bus voltage in any operation condition: charging or discharging the ESD, or even without any power exchange between the ESD and the DC bus. Due to the non-linear nature of the power converter, the SMC parameters are adapted on-line to ensure global stability in any operation condition. Such stability of the adaptive SMC is mathematically demonstrated using analytical expressions for the transversality, reachability and equivalent control conditions. Moreover, a design procedure for the adaptive SMC parameters is provided in order to ensure the dynamic response required for the correct operation of the load. Finally, simulations and experimental tests validate the proposed controller and design procedure.

  5. TASAWUF DAN TANTANGAN PERUBAHAN SOSIAL

    Directory of Open Access Journals (Sweden)

    Yusno Abdullah Otta

    2010-12-01

    Full Text Available Abstract: Sufism in the eras of globalization and information often faces considerable challenges. The function and role of religion in modern life have in some aspects diminished, including sufism because it is claimed to have played no or less role in resolving problems nor stimulating social change. As one of Islamic traditions, sufism makes ihsan as its essential teaching. By this concept, sufism encourages humans to pray to God wholeheartedly. Sufism is now required to show its own existence and function by making fundamental contribution for modern life, an era which differ socio-culturally from the one when sufism firstly emerged. Sufism thus needs to adapt itself to the changes in the era of information and globalization so that it will remain relevant and suitable for human progress. Sufism needs to release itself from its exclusivism and to avoid being trapped in its own logic, namely speculative-trancendentalism Abstrak: Tasawuf di era globalisasi dan informasi seperti saat ini tengah menghadapi tantangan yang sangat berat. Kehidupan modern sudah sampai pada taraf tidak lagi mempercayai fungsi dan peran agama, termasuk di dalamnya tasawuf, sebagai ‘sesuatu’ yang dapat memberikan solusi bagi perubahan sosial. Sebagai manifestasi paripurna dari ajaran Islam, tasawuf berintikan pada konsep Ihsān yang mengajarkan untuk beribadah kepada Sang Pencipta secara ikhlas. Untuk menunjukkan eksistensinya, tasawuf dituntut peran aktifnya secara konstruktif-solutif terhadap berbagai kebutuhan manusia modern yang amat berbeda dengan setting maupun struktur masyarakat pada saat tasawuf “dilahirkan” pada zamannya. Tasawuf dituntut untuk memerlukan “baju” baru di era informasi yang kerap berubah ini, agar tetap realible dan suitable dengan kemajuan zaman. Hal itu dapat dilakukan dengan berusaha “keluar” dari eksklusifismenya dengan meminjam tradisi filsafat analitik pasca positivisme dan tradisi eksistensialis serta dinamika filsafat

  6. Analisis Kinerja EIGRP dan OSPF pada Topologi Ring dan Mesh

    Directory of Open Access Journals (Sweden)

    DWI ARYANTA

    2014-01-01

    Full Text Available ABSTRAK EIGRP (Enhanced Interior Gateway Routing Protocol dan OSPF (Open Shortest Path Fisrt adalah routing protokol yang banyak digunakan pada suatu jaringan komputer. EIGRP hanya dapat digunakan pada perangkat Merk CISCO, sedangkan OSPF dapat digunakan pada semua merk jaringan. Pada penelitian ini dibandingkan delay dan rute dari kedua routing protokol yang diimplementasikan pada topologi Ring dan Mesh. Cisco Packet Tracer 5.3 digunakan untuk mensimulasikan kedua routing protokol ini. Skenario pertama adalah perancangan jaringan kemudian dilakukan pengujian waktu delay 100 kali dalam 5 kasus. Skenario kedua dilakukan pengujian trace route untuk mengetahui jalur yang dilewati paket data lalu memutus link utama. Pada skenario kedua juga dilakukan perbandingan nilai metric dan cost hasil simulasi dengan perhitungan rumus. Skenario ketiga dilakukan pengujian waktu konvergensi untuk setiap routing protokol pada setiap topologi. Hasilnya EIGRP lebih cepat 386 µs daripada OSPF untuk topologi Ring sedangkan OSPF lebih cepat 453 µs daripada EIGRP untuk topologi Mesh. Hasil trace route menunjukan rute yang dipilih oleh routing protokol yaitu nilai metric dan cost yang terkecil. Waktu konvergensi rata-rata topologi Ring pada EIGRP sebesar 12,75 detik dan 34,5 detik pada OSPF sedangkan topologi Mesh di EIGRP sebesar 13 detik dan 35,25 detik di OSPF. Kata Kunci: EIGRP, OSPF, Packet Tracer 5.3, Ring, Mesh, Konvergensi ABSTRACT EIGRP (Enhanced Interior Gateway Routing Protocol and OSPF (Open Shortest Path Fisrt is the routing protocol that is widely used in a computer network. EIGRP can only be used on devices Brand CISCO, while OSPF can be used on all brands of network. In this study comparison of both the delay and the routing protocol implemented on Ring and Mesh topology. Cisco Packet Tracer 5.3 is used to simulate both the routing protocol. The first scenario is the design of the network and then do the test of time delay 100 times in 5 cases. The

  7. Analisis Kinerja EIGRP dan OSPF pada Topologi Ring dan Mesh

    Directory of Open Access Journals (Sweden)

    DWI ARYANTA

    2016-02-01

    Full Text Available ABSTRAK EIGRP (Enhanced Interior Gateway Routing Protocol dan OSPF (Open Shortest Path Fisrt adalah routing protokol yang banyak digunakan pada suatu jaringan komputer. EIGRP hanya dapat digunakan pada perangkat Merk CISCO, sedangkan OSPF dapat digunakan pada semua merk jaringan. Pada penelitian ini dibandingkan delay dan rute dari kedua routing protokol yang diimplementasikan pada topologi Ring dan Mesh. Cisco Packet Tracer 5.3 digunakan untuk mensimulasikan kedua routing protokol ini. Skenario pertama adalah perancangan jaringan kemudian dilakukan pengujian waktu delay 100 kali dalam 5 kasus. Skenario kedua dilakukan pengujian trace route untuk mengetahui jalur yang dilewati paket data lalu memutus link utama. Pada skenario kedua juga dilakukan perbandingan nilai metric dan cost hasil simulasi dengan perhitungan rumus. Skenario ketiga dilakukan pengujian waktu konvergensi untuk setiap routing protokol pada setiap topologi. Hasilnya EIGRP lebih cepat 386 µs daripada OSPF untuk topologi Ring sedangkan OSPF lebih cepat 453 µs daripada EIGRP untuk topologi Mesh. Hasil trace route menunjukan rute yang dipilih oleh routing protokol yaitu nilai metric dan cost yang terkecil. Waktu konvergensi rata-rata topologi Ring pada EIGRP sebesar 12,75 detik dan 34,5 detik pada OSPF sedangkan topologi Mesh di EIGRP sebesar 13 detik dan 35,25 detik di OSPF. Kata Kunci : EIGRP, OSPF, Packet Tracer 5.3, Ring, Mesh, Konvergensi ABSTRACT EIGRP (Enhanced Interior Gateway Routing Protocol and OSPF (Open Shortest Path Fisrt is the routing protocol that is widely used in a computer network. EIGRP can only be used on devices Brand CISCO, while OSPF can be used on all brands of network. In this study comparison of both the delay and the routing protocol implemented on Ring and Mesh topology. Cisco Packet Tracer 5.3 is used to simulate both the routing protocol. The first scenario is the design of the network and then do the test of time delay 100 times in 5 cases. The

  8. KEJAHATAN PORNOGRAFI Upaya Pencegahan dan Penanggulangannya di Kabupaten Ponorogo

    Directory of Open Access Journals (Sweden)

    Irma Rumtianing Uswatul Hanifah

    2013-12-01

    Full Text Available Pemerintah telah mengeluarkan undang-undang No 44 Tahun 2008 tentang pornografi. Tujuan dari undang-undang tersebut salah satunya mewujudkan dan memelihara tatanan kehidupan masyarakat yang beretika, berkepribadian luhur, menjungjung tinggi nilai-nilai Ketuhanan Yang Maha Esa, serta menghormati harkat dan martabat kemanusiaan. Dalam perkembangannya, materi pornografi mengalami pertumbuhan dan penyebaran yang pesat seiring dengan perkembangan dan kemajuan teknologi informasi dan komunikasi. Peredaran dan penyebaran film porno kini semakin pesat karena ditopang dengan kecanggihan sarana informasi dan komunikasi salah satunya media internet yang bisa diakses oleh masyarakat pada setiap saat. Tulisan berikut akan mengkaji bagaimana upaya dan trategi yang dilakukan oleh Pemerintah Kabupaten Ponorogo dalam mencegah dan menanggulangi kejahatan pornografi di Kabupaten Ponorogo, apa hambatan dan bagaimana solusi dalam pencegahan serta penanggulangan kejahatan pornografi di Kabupaten Ponorogo serta bagaimana formulasi kebijakan untuk pencegahan dan penanggulangan kejahatan pornografi di Kabupaten Ponorogo. Kata kunci: Pornografi, Polres, KP3A

  9. KANDUNGAN ASAM AMINO, TAURIN, MINERAL MAKRO-MIKRO, DAN VITAMIN B12 UBUR-UBUR (Aurelia aurita SEGAR DAN KERING

    Directory of Open Access Journals (Sweden)

    - - Nurjanah

    2014-06-01

    Full Text Available Tujuan penelitian adalah menentukan komposisi gizi, asam amino, taurin, mineral makro dan mikro,dan vitamin B12 pada ubur-ubur (Aurelia aurita segar dan kering. Asam amino esensial pada ubur-uburyaitu arginina, leusina, valina, treonina, lisina, isoleusina, fenilalanina, metionina, dan histidina, sedangkanasam amino non esensial yaitu asam glutamat, glisina, asam aspartat, serina, alanina, dan tirosina. Asamamino esensial tertinggi segar dan kering adalah arginina sebesar 1,72% (bk dan 1,44% (bk dan terendahhistidina yaitu sebesar 0,19% (bk dan 0,13% (bk. Asam amino non esensial segar dan kering tertinggiadalah asam glutamat dan glisina yaitu sebesar 3,26% (bk dan 2,62% (bk dan terkecil tirosina sebesar0,38% (bk dan 0,41% (bk. Taurin segar sebesar 2,68% (bk dan kering sebesar 0,67% (bk. Mineral makrotertinggi segar dan kering adalah natrium yaitu 180.092,1 ppm (bk dan 111.209,4 ppm (bk, terkecil adalahkalsium yaitu 5.750,2 ppm (bk dan 11,1 ppm (bk. Mineral mikro tertinggi segar dan kering adalah iodium yaitu8.291,5 ppm (bk dan 1.800 ppm (bk dan yang terkecil adalah tembaga yaitu 1,1 ppm (bk dan 0,6 ppm (bk.Vitamin B12 segar adalah 396,6 μm/100 g (bk dan kering 63,5 μm/100 g (bk.Kata kunci: asam amino, mineral, taurin, ubur-ubur (Aurelia aurita, vitamin B12

  10. Hybrid Non-Isolated and Non Inverting Nx Interleaved DC-DC Multilevel Boost Converter for Renewable Energy Applications

    DEFF Research Database (Denmark)

    Bhaskar, Mahajan Sagar; Kulkarni, Rishi M.; Padmanaban, Sanjeevi Kumar

    2016-01-01

    In this paper hybrid non isolated/ non inverting Nx interleaved DC-DC multilevel Boost Converter for renewable energy applications is presented. The presented hybrid topology is derived from the conventional interleaved converter and the Nx Multilevel boost converter. In renewable energy...... applications, generated energy cannot be directly used at application end. In most of the cases it needs to be stepped up with DC-DC converter at operating voltage levels as per the requirement of the application. Though conventional boost converter can theoretically be used for this purpose, but obtaining...

  11. Novel Step-Up DC/DC Converter with No Right Half Plane Zero and Reduced Switched Voltage Stress Characteristics

    DEFF Research Database (Denmark)

    Mostaan, Ali; Alizadeh, Ebrahim; Soltani, Mohsen

    2014-01-01

    and the voltage transfer gain is obtained. It is also demonstrated that the voltage stress on all semiconductor devices is restricted to input voltage which allows the utilization of a power switch with lower drain source resistance. In order to further increase the voltage gain another switched capacitor voltage......Novel step-up DC/DC converter is introduced in this paper. This converter is realized with adding the switched capacitor voltage multiplier cell to the three switch step-down DC/DC converter that has been proposed in the literature. The proposed converter is analyzed in the steady state...

  12. DC Rocks! Using Place-Based Learning to Introduce Washington DC's K-12 Students to the Geosciences

    Science.gov (United States)

    Mayberry, G. C.; Mattietti, G. K.

    2017-12-01

    The Washington DC area has interesting geology and a multitude of agencies that deal with the geosciences, yet K-12 public school students in DC, most of whom are minorities, have limited exposure to the geosciences. Geoscience agencies in the DC area have a unique opportunity to address this by introducing the geosciences to local students who otherwise may not have such an opportunity, by highlighting the geology in the students' "backyard," and by leveraging partnerships among DC-based geoscience-related agencies. The USGS and George Mason University are developing a project called DC Rocks, which will give DC's students an exciting introduction into the world of geoscience with place-based learning opportunities that will make geoscience relevant to their lives and their futures. Both the need in DC and the potential for lasting impact are great; the geosciences have the lowest racial diversity of all the science, technology, engineering, and math (STEM) fields, 89% of students in DC public schools are minorities, and there is no dedicated geoscience curriculum in DC. DC Rocks aims to give these students early exposure to the earth sciences, and encourage them to consider careers in the profession. DC Rocks will work with partner agencies to apply several methods that are recommended by researchers to increase the participation of minority students in the geosciences, including providing profoundly positive experiences that spark interest in the geosciences (Levine et al., 2007); increasing students' sense of belonging in the geosciences (Huntoon, et al, 2016); and place-based teaching practices that emphasize the study of local sites (Semken, 2005), such as DC's Rock Creek Park. DC Rocks will apply these methods by coordinating local geoscientists and resources to provide real-world examples of the geosciences' impact on students' lives. Through the DC Rocks website, educators will be able to request geoscience-related resources such as class presentations by

  13. A Markovian Approach Applied to Reliability Modeling of Bidirectional DC-DC Converters Used in PHEVs and Smart Grids

    Directory of Open Access Journals (Sweden)

    M. Khalilzadeh

    2016-12-01

    Full Text Available In this paper, a stochastic approach is proposed for reliability assessment of bidirectional DC-DC converters, including the fault-tolerant ones. This type of converters can be used in a smart DC grid, feeding DC loads such as home appliances and plug-in hybrid electric vehicles (PHEVs. The reliability of bidirectional DC-DC converters is of such an importance, due to the key role of the expected increasingly utilization of DC grids in modern Smart Grid. Markov processes are suggested for reliability modeling and consequently calculating the expected effective lifetime of bidirectional converters. A three-leg bidirectional interleaved converter using data of Toyota Prius 2012 hybrid electric vehicle is used as a case study. Besides, the influence of environment and ambient temperature on converter lifetime is studied. The impact of modeling the reliability of the converter and adding reliability constraints on the technical design procedure of the converter is also investigated. In order to investigate the effect of leg increase on the lifetime of the converter, single leg to five-leg interleave DC-DC converters are studied considering economical aspect and the results are extrapolated for six and seven-leg converters. The proposed method could be generalized so that the number of legs and input and output capacitors could be an arbitrary number.

  14. Well coupled, low noise, dc SQUIDS

    International Nuclear Information System (INIS)

    Muhlfelder, B.; Beall, J.A.; Cromar, M.W.; Johnson, W.W.; Ono, R.H.

    1985-01-01

    The authors have designed, fabricated, and tested a Double Transformer (DT) coupled dc SQUID (Superconducting Quantum Interference Device) with low noise, an input inductance of 1μH and a smooth input-output characteristic. A transmission line model is presented to explain a resonance in the input-output characteristic of early versions of this device. Guided by the results of numerical simulations a new version of this device has been built and tested. Experimental results are presented that show that the resonance can be moved to a higher voltage by reducing the area of the SQUID loop. The voltage-external flux characteristic of some of these new devices agrees to within 10% with computer simulations. The minimum detectable energy per unit bandwidth (MDE) referred to the SQUID loop, is 10h, where h is Planck's constant. Computer simulations indicate an MDE of 6h

  15. Electronically commutated dc motors for electric vehicles

    Science.gov (United States)

    Maslowski, E. A.

    1981-01-01

    A motor development program to explore the feasibility of electronically commutated dc motors (also known as brushless) for electric cars is described. Two different design concepts and a number of design variations based on these concepts are discussed. One design concept is based on a permanent magnet, medium speed, machine rated at 7000 to 9000 rpm, and powered via a transistor inverter power conditioner. The other concept is based on a permanent magnet, high speed, machine rated at 22,000 to 26,000 rpm, and powered via a thyristor inverter power conditioner. Test results are presented for a medium speed motor and a high speed motor each of which have been fabricated using samarium cobalt permanent magnet material.

  16. dc glow-discharge cleaning for accelerator

    International Nuclear Information System (INIS)

    Chou, T.S.; Hseuh, H.C.

    1982-01-01

    Average pressure of 1 x 10 -11 torr and vacuum stability are necessary for the successful operation of the proton storage rings such as ISABELLE. Vacuum degassing at high temperature and in situ bake-out will reduce the thermoout-gassing rate of the beam tubes to approx. 10 -13 Tl/cm 2 sec, therefore achieving the required static pressure. The vacuum instability caused by beam-induced ion desorption can be solved by dc glow discharge cleaning. With evidence from this study, the present understanding of glow discharge in a cylindrically symmetric geometry is reviewed. Argon and argon/oxygen mixture serve as plasmas in the glow. The role of oxygen in cleaning the beam tubes during the glow discharge is demonstrated experimentally. Glow discharge cleaning with and without bake-out is also studied

  17. Kemampuan Penalaran Dan Komunikasi Matematis : Apa, Mengapa, Dan Bagaimana Ditingkatkan Pada Mahasiswa

    Directory of Open Access Journals (Sweden)

    Cita Dwi Rosita

    2014-01-01

    Full Text Available Matematika diberikan kepada semua siswa tanpa terkecuali agar terlatih berpikir secara logis, analitis, sistematis, dan kreatif. Dengan kompetensi-kompetensi tersebut diharapkan siswa dapat memiliki kemampuan menerima, mengelola, dan memanfaatkan pengetahuan yang diperolehnya untuk bertahan hidup dalam keadaan yang selalu berubah dan kompetitif. Latihan berpikir, merumuskan dan memecahkan masalah serta mengambil kesimpulan akan membantu siswa untuk mengembangkan pemikirannya atau intelegensinya. Dengan demikian, semakin banyak siswa berlatih memecahkan masalah matematis maka akan semakin mengerti dan berkembang cara berpikirnya. Kemahiran siswa dalam memecahkan masalah matematis, dipengaruhi oleh kemampuannya dalam memahami matematika. Kemampuan bernalar berperan penting dalam memahami matematika. Bernalar secara matematis merupakan suatu kebiasaan berpikir, dan layaknya suatu kebiasaan, maka penalaran semestinya menjadi bagian yang konsisten dalam setiap pengalaman-pengalaman matematis siswa. Dari pengalaman-pengalaman awal siswa belajar materi matematika, penting bagi guru untuk membantu siswa memahami bahwa penegasan-penegasan harus selalu mempunyai alasan. Komunikasi matematis berperan penting pada proses pemecahan masalah. Melalui komunikasi ide bisa menjadi objek yang dihasilkan dari sebuah refleksi, penghalusan, diskusi, dan pengembangan. Proses komunikasi juga membantu dalam proses pembangunan makna dan pempublikasian ide. Ketika para siswa ditantang untuk berpikir dan bernalar tentang matematika dan mengomunikasikan hasil pikiran mereka secara lisan atau dalam bentuk tulisan, sebenarnya mereka sedang belajar menjelaskan dan meyakinkan. Mendengarkan penjelasan lain, berarti sedang memberi kesempatan kepada siswa untuk mengembangkan pemahaman mereka.

  18. KEADILAN ORGANISASIONAL DAN KONSEKUENSINYA TERHADAP ORGANIZATIONAL CITIZENSHIP BEHAVIOR GURU SMA DAN SMK KOTA MADIUN*

    Directory of Open Access Journals (Sweden)

    Veronika Agustini Srimulyani

    2017-11-01

    Full Text Available Keadilan organisasional memiliki potensi untuk menciptakan manfaat besar bagi organisasi dan karyawan, dan salah satu manfaatnya adalah menumbuhkan extra-role behavior (ERB atau organizational citizenship behavior (OCB. Tujuan dari penelitian ini untuk menganalisis konsekuensi keadilan organisasional (keadilan distributif, keadilan prosedural, dan keadilan interaksional pada organizational citizenship behavior guru SMA dan guru SMK di Kota Madiun. OCB dibagi menjadi dua jenis yaitu citizenship behaviors directed toward individuals (OCB-I dan citizenship behaviors directed towards the organisation (OCB-O. Penelitian ini menggunakan pendekatan kuantitatif dengan metode survei. Sampel penelitian ini adalah 409 guru, yang dipilih secara non-acak. Data diperoleh dengan menyebarkan kuesioner. Analisis data menggunakan analisis regresi. Hasil penelitian disimpulkan: keadilan distributif dan keadilan interaksional berpengaruh positif signifikan terhadap OCB-I dan OCB-O; keadilan prosedural tidak berpengaruh signifikan terhadap OCB-I tetapi keadilan prosedural berpengaruh positif signifikan terhadap OCB-O.

  19. Simulation analysis of cascade controller for DC-DC bank converter

    International Nuclear Information System (INIS)

    Mahar, M.A.; Abro, M.R.; Larik, A.S.

    2009-01-01

    Power electronic converters are periodic variable structure systems due to their switched operation. During the last few decades several new dc-dc converter topologies have emerged. Buck converter being simple in topology, has recently drawn attraction of many researchers. Basically, a buck converter is highly underdamped system. In order to overcome the developed oscillations in output of this converter, various control techniques have been proposed. However, these techniques are fraught with many drawbacks. This paper focus on a cascade controller based buck topology. Steady state analysis is given in this paper which shows output voltage and inductor current in detail. Dynamic analysis for line and load variation is also presented. The buck topology is implemented and simulated in MATLAB/Simulink. The simulated results are presented. (author)

  20. Practical Design Guidelines of qZSI Based Step-Up DC/DC Converter

    Science.gov (United States)

    Zakis, Janis; Vinnikov, Dmitri; Roasto, Indrek; Jalakas, Tanel

    2010-01-01

    This paper presents some design guidelines for a new voltage fed step-up DC/DC isolated converter. The most significant advantage of proposed converter is voltage buck-boost operation on single stage. The most promising application for proposed converter is in the field of distributed power generation e.g. fuel cells or photovoltaic. The most sensitive issues - such as power losses caused by high currents in the input side of converter and high transient overvoltages across the inverter bridge caused by stray inductances were discussed and solved. The proposals and recommendations to overcome these issues are given in the paper. The Selection and design guidelines of converter elements are proposed and explained. The prototype of proposed converter was built and experimentally tested. Some results are presented and evaluated.