WorldWideScience

Sample records for premilking teat preparation

  1. Anatomical characteristics of teats and premilking bacterial counts of teat skin swabs of primiparous cows exposed to different types of bedding.

    Science.gov (United States)

    Guarín, J F; Baumberger, C; Ruegg, P L

    2017-02-01

    Bacterial populations of teat skin are associated with risk of intramammary infection and may be influenced by anatomical characteristics of teats. The objective of this study was to evaluate associations of selected anatomical characteristics of teats with bacterial counts of teat skin of cows exposed to different types of bedding. Primarily primiparous Holstein cows (n = 128) were randomly allocated to 4 pens within a single barn. Each pen contained 1 type of bedding [new sand (NES), recycled sand (RS), deep-bedded manure solids (DBMS), and shallow-bedded manure solids over foam core mattresses (SBMS)]. During a single farm visit udders (n = 112) were scored for hygiene and 1 front (n = 112) and 1 rear teat (n = 111) of each enrolled cow were scored for hyperkeratosis (HK). Teat length, teat barrel diameter, and teat apex diameter were measured and teat skin swabs were systematically collected for microbiological analysis. Linear type evaluation data for udders of each cow were retrieved for each cow. Teat position (front or rear) was associated with occurrence of clinical mastitis during the 12 mo before the farm visit and more cases occurred in front quarters. The proportion of udders that were classified as clean (score 1 or 2) was 68, 82, 54, and 95% for cows housed in pens containing NES, RS, SBMS, and DBMS, respectively. No association was found between HK score and teat position and no association was found between HK score and teat skin bacterial count. Bacterial counts of teat skin swabs from front teats of cows in pens containing RS and SBMS were significantly less than those of rear teats of cows in pens containing DBMS or NES. Teat skin bacterial counts were significantly greater for swabs obtained from teats of cows with udder hygiene scores of 3 and 4 as compared with swabs obtained from cows with cleaner udders. Of all udder conformation traits evaluated, only narrower rear teat placement was positively associated with bacterial counts on teat skin

  2. An observational study investigating the association of ultrasonographically assessed machine milking-induced changes in teat condition and teat-end shape in dairy cows.

    Science.gov (United States)

    Wieland, M; Virkler, P D; Borkowski, A H; Älveby, N; Wood, P; Nydam, D V

    2018-06-21

    Mechanical forces during machine milking induce changes in teat condition which can be differentiated into short-term and long-term changes. Machine milking-induced short-term changes in teat condition (STC) are defined as tissue responses to a single milking and have been associated with the risk of new intramammary infection. Albeit, their association with teat characteristics, such as teat-end shape, has not been investigated by rigorous methods. The primary objective was to determine the association of STC, as measured by ultrasonography, with teat-end shape. The second objective was to describe possible differences in the recovery time of teat tissue after machine milking among teats with different teat-end shapes. Holstein cows (n=128) were enrolled in an observational study, housed in free-stall pens with sand bedding and milked three times a day. Ultrasonography of the left front and right hind teat was performed after teat preparation before milking (t-1), immediately after milking (t 0) and 1, 3, 5 and 7 h after milking (t 1, t 3, t 5, t 7). The teat tissue parameters measured from ultrasound scans were teat canal length, teat-end diameter, teat-end diameter at the midpoint between the distal and proximal end of the teat canal, teat wall thickness, and teat cistern width. Teat-end shape was assessed visually and classified into three categories: pointed, flat and round. Multivariable linear regression analyses showed differences in the relative change of teat tissue parameters (compared with t-1) at t 0 among teats with different teat-end shapes, with most parameters showing the largest change for round teats. The premilking values were reached (recovery time) after 7 h in teats with a pointed teat-end shape, whereas recovery time was greater than 7 h in teats with flat and round teat-end shapes. Under the same liner and milking machine conditions, teats with a round teat-end shape had the most severe short-term changes. The results of this observational

  3. Reduction of teat skin mastitis pathogen loads: differences between strains, dips, and contact times.

    Science.gov (United States)

    Enger, B D; Fox, L K; Gay, J M; Johnson, K A

    2015-02-01

    The purpose of these experiments was to (1) assess differences in mastitis pathogen strain sensitivities to teat disinfectants (teat dips), and (2) determine the optimum time for premilking teat dips to remain in contact with teat skin to reduce pathogen loads on teat skin. Two experiments were conducted using the excised teat model. In experiment 1, the differences in mastitis pathogen strain sensitivities to 4 commercially available dips (dip A: 1% H2O2; dip B: 1% chlorine dioxide; dip C: 1% iodophor; and dip D: 0.5% iodophor) were evaluated. Four strains of 11 common mastitis pathogens (Staphylococcus aureus, Streptococcus agalactiae, Mycoplasma bovis, Streptococcus dysgalactiae, Streptococcus uberis, Escherichia coli, Staphylococcus chromogenes, Staphylococcus epidermidis, Staphylococcus hyicus, Staphylococcus xylosus, and Staphylococcus haemolyticus) were tested. In experiment 2, the percentage log reduction of mastitis pathogens (Escherichia coli, Streptococcus uberis, Streptococcus dysgalactiae, Klebsiella species, Staphylococcus chromogenes, Staphylococcus haemolyticus, Staphylococcus xylosus, and Staphylococcus epidermidis) on teat skin with 3 commercially available teat dips: dip A; dip D; and dip E: 0.25% iodophor, using dip contact times of 15, 30, and 45 s, was evaluated. Experiment 1 results indicated significant differences in strain sensitivities to dips within pathogen species: Staphylococcus aureus, Staphylococcus chromogenes, and Streptococcus uberis. Species differences were also found where Mycoplasma bovis (97.9% log reduction) was the most sensitive to tested teat dips and Staphylococcus haemolyticus (71.4% log reduction) the most resistant. Experiment 2 results indicated that contact times of 30 and 45 s were equally effective in reducing recovered bacteria for dips D and E and were also significantly more effective than a 15-s contact time. No differences were seen in recovered bacteria between tested contact times after treatment with dip

  4. Effect of disinfecting teats post-milking or pre- and post-milking on intramammary infection and somatic cell count.

    Science.gov (United States)

    Williamson, J H; Lacy-Hulbert, S J

    2013-09-01

    To determine the effects of (a) post-milking teat disinfection compared with no disinfection and (b) pre- and post-milking teat disinfection compared with post-milking disinfection alone, on the incidence of new intramammary infection (IMI), somatic cell count (SCC) and teat skin abnormalities in dairy cows. In Experiment 1, dairy cows in five dairy herds were randomly allocated to a post-milking teat disinfection group (n=230), that was sprayed with an iodine-based disinfectant (TeatguardPlus) for a complete lactation, or to a non-disinfected group (n=239). In Experiment 2, cows were randomly allocated to post-milking teat disinfection (n=239) or both pre- and post-milking teat disinfection (n=235), using a chloramine-T-based disinfectant (Teatsweet) for both treatments, from calving to 118-127 days in milk. The incidence of new IMI was determined by aseptic sampling of all quarters at calving, during lactation, and at trial end or at drying-off, with clinical mastitis cases sampled on detection. SCC and teat skin abnormalities were measured at 2-monthly intervals during lactation. In both experiments, disinfectant was applied by spray application. Cows that received post-milking teat disinfection had a lower incidence of new IMI caused by Staphylococcus aureus, Streptococcus uberis, Corynebacterium spp and coagulase negative staphylococci, had lower bulk milk SCC during lactation, and had fewer teat skin abnormalities compared with the non-disinfected cows (p disinfection, in addition to post-milking teat disinfection, did not reduce the incidence of new IMI for any pathogens and did not reduce SCC (p> 0.05). Post-milking teat disinfection applied as a spray is a key component in mastitis control in New Zealand. There was no benefit from the addition of pre-milking disinfection. This study confirms previous findings of the effectiveness of post-milking teat disinfection in reducing the incidence of IMI caused by the common mastitis-causing pathogens in New

  5. Teat condition in dairy cows

    NARCIS (Netherlands)

    Neijenhuis, Francesca

    2004-01-01

    The dairy cow's teat is the first line of defence against mastitis pathogens. The milking process may affect the teat's condition, increasing the risk of mastitis. It is well-proven that teat-ends with severe erosions or broken skin will have an increased risk of mastitis. However, more common

  6. Teat Condition in Dairy Cows

    NARCIS (Netherlands)

    Neijenhuis, F.

    2004-01-01

    The dairy cow's teat is the first line of defence against mastitis pathogens. The milking process may affect the teat's condition, increasing the risk of mastitis. It is well-proven that teat-ends with severe erosions or broken skin will have an increased risk of mastitis. However, more common

  7. Mode of action and in vitro susceptibility of mastitis pathogens to macedocin ST91KM and preparation of a teat seal containing the bacteriocin

    Directory of Open Access Journals (Sweden)

    Renee Pieterse

    2010-03-01

    Full Text Available Mastitis is considered to be the most economically costly disease affecting the dairy industry. Regular dosage of animals with antibiotics, including use of prophylactic concentrations, may select for resistant strains. The purpose of this study was to determine the mode of action of a new bacteriocin (macedocin ST91KM, to evaluate the antimicrobial resistance of mastitis pathogens to antibiotics commonly used in treatment remedies, and to introduce the possible use of an alternative antimicrobial agent. The bacteriocin macedocin ST91KM, produced by Streptococcus gallolyticus subsp. macedonicus ST91KM, is bactericidal to Streptococcus agalactiae, Streptococcus dysgalactiae, Streptococcus uberis and Staphylococcus aureus associated with mastitis infections, including strains resistant to methicillin and oxacillin. Sensitive cells were deformed and secreted nucleotides, K+ and β-galactosidase when exposed to macedocin ST91KM. Adsorption of the peptide to target cells decreased in the presence of solvents, suggesting that receptors on the cell surfaces have lipid moieties. No adsorption was recorded in the presence of MgCl2, KI and Na2CO3, suggesting that ionic strength plays an important role. A teat seal preparation containing macedocin ST91KM effectively released the peptide and inhibited the growth of S. agalactiae. Macedocin ST91KM could form the basis for alternative dry cow therapy to prevent mastitis infections in dairy cows as it is effective against pathogens that display resistance to conventional antibiotic therapy.

  8. Bacterial counts on teat skin and in new sand, recycled sand, and recycled manure solids used as bedding in freestalls.

    Science.gov (United States)

    Rowbotham, R F; Ruegg, P L

    2016-08-01

    On modern dairy farms, environmental mastitis pathogens are usually the predominant cause of mastitis, and bedding often serves as a point of exposure to these organisms. The objective of this longitudinal study was to determine bacterial populations of 4 different bedding types [deep-bedded new sand (NES), deep-bedded recycled sand (RS), deep-bedded manure solids (DBMS), and shallow-bedded manure solids over foam core mattresses (SBMS)] and of teat skin swabs of primarily primiparous cows housed in a single facility over all 4 seasons. Samples of bedding were collected weekly (n=49wk) from pens that each contained 32 lactating dairy cows. Throughout the length of the same period, composite swabs of teat skin were collected weekly from all cows before and after premilking teat sanitation. Median numbers of streptococci and streptococci-like organisms (SSLO) were >8.6×10(6) cfu/g and >6.9×10(3) cfu/teat swab for all bedding types and teat swabs, respectively. Numbers of SSLO were greatest in samples of SBMS (2.1×10(8) cfu/g) and least in samples of NES (8.6×10(6) cfu/g), RS (1.3×10(7) cfu/g), and DBMS (1.7×10(7) cfu/g). Numbers of gram-negative bacteria in bedding (5.5×10(4) to 1.2×10(7) cfu/g) were fewer than numbers of SSLO (8.6×10(6) to 2.1×10(8) cfu/g). Numbers of coliform bacteria were greatest in samples of DBMS (2.2×10(6) cfu/g) and least in samples of NES (3.6×10(3) cfu/g). In general, the relative number of bacteria on teat skin corresponded to exposure in bedding. Numbers of gram-negative bacteria recovered from prepreparation teat swabs were greatest for cows bedded with DBMS (1.0×10(4) cfu/swab) and RS (2.5×10(3) cfu/swab) and least for cows bedded with NES (5.8×10(2) cfu/swab). Median numbers of coliform and Klebsiella spp. recovered from prepreparation teat swabs were below the limit of detection for all cows except those bedded with DBMS. Numbers of SSLO recovered from prepreparation teat swabs were least for cows bedded with DBMS (6.9

  9. Teat order affects postweaning behaviour in piglets

    Directory of Open Access Journals (Sweden)

    Roberta Sommavilla

    2015-09-01

    Full Text Available The objective of this study was to investigate if piglets that suck anterior teats differ from the others in the litter in birth weight, if they have higher growth rate during lactation, and if this affects behaviour and post-weaning weight gain, when piglets change to a solid diet. For this, the teat order of 24 litters was determined during suckling. Piglets were weaned on the 28thday of age, and 24 groups were formed, composed of one piglet that sucked on the first two pairs of teats (AT and three piglets that sucked on the other teats (OT. Even though weight at birth did not vary according to teat order, weight gain at weaning differed between the groups (AT: 6.64, S.E. 0.20kg, OT: 5.73, S.E. 0.13kg; P

  10. Teated

    Index Scriptorium Estoniae

    2008-01-01

    Kontserdid TÜ aulas: Tartu Ülikooli kammerkoori kevadkontsert 16. märtsil, pianist Peep Lassmann 18. märtsil (kavas: Sumera "Pala aastast 1981", Liszt-Rossini "Stabat Mater", Liszt-Verdi "Rigoletto parafraas", Liszt "Tuisk" ja "Hispaania rapsoodia"), saksofonikvartett Sax-Est 19. märtsil, kontsert "Richard Ritsing - 105" 28. märtsil

  11. Estimating teat canal cross-sectional area to determine the effects of teat-end and mouthpiece chamber vacuum on teat congestion.

    Science.gov (United States)

    Penry, J F; Upton, J; Mein, G A; Rasmussen, M D; Ohnstad, I; Thompson, P D; Reinemann, D J

    2017-01-01

    The primary objective of this experiment was to assess the effect of mouthpiece chamber vacuum on teat-end congestion. The secondary objective was to assess the interactive effects of mouthpiece chamber vacuum with teat-end vacuum and pulsation setting on teat-end congestion. The influence of system vacuum, pulsation settings, mouthpiece chamber vacuum, and teat-end vacuum on teat-end congestion were tested in a 2×2 factorial design. The low-risk conditions for teat-end congestion (TEL) were 40 kPa system vacuum (Vs) and 400-ms pulsation b-phase. The high-risk conditions for teat-end congestion (TEH) were 49 kPa Vs and 700-ms b-phase. The low-risk condition for teat-barrel congestion (TBL) was created by venting the liner mouthpiece chamber to atmosphere. In the high-risk condition for teat-barrel congestion (TBH) the mouthpiece chamber was connected to short milk tube vacuum. Eight cows (32 quarters) were used in the experiment conducted during 0400 h milkings. All cows received all treatments over the entire experimental period. Teatcups were removed after 150 s for all treatments to standardize the exposure period. Calculated teat canal cross-sectional area (CA) was used to assess congestion of teat tissue. The main effect of the teat-end treatment was a reduction in CA of 9.9% between TEL and TEH conditions, for both levels of teat-barrel congestion risk. The main effect of the teat-barrel treatment was remarkably similar, with a decrease of 9.7% in CA between TBL and TBH conditions for both levels of teat-end congestion risk. No interaction between treatments was detected, hence the main effects are additive. The most aggressive of the 4 treatment combinations (TEH plus TBH) had a CA estimate 20% smaller than for the most gentle treatment combination (TEL plus TBL). The conditions designed to impair circulation in the teat barrel also had a deleterious effect on circulation at the teat end. This experiment highlights the importance of elevated mouthpiece

  12. Effect of presampling procedures on real-time PCR used for diagnosis of intramammary infections with Staphylococcus aureus in dairy cows at routine milk recordings

    DEFF Research Database (Denmark)

    Mahmmod, Yasser; Klaas, Ilka Christine; Nielsen, Søren Saxmose

    2013-01-01

    the farmers' routine premilking preparations, 624 cows of the 1,199 cows were randomly selected for bacterial culture preceded by presampling procedures. These procedures were: cleaning of udder teats, removing the first streams of milk, and 70% alcohol teat disinfection. Data on parity, somatic cell counts...

  13. Congenital Absence of a Teat in a Japanese Black Heifer

    Directory of Open Access Journals (Sweden)

    Mohamed Elshabrawy Ghanem

    2011-01-01

    Full Text Available A case of Japanese Black heifer with a congenital absence of teat (athelia was observed at Highashi-Hiroshima Agricultural High School, Hiroshima Prefecture, Japan. The heifer was born after transfer of embryo from Japanese Black cattle. The sire of the heifer was a proven Japanese Black. The birth weight of the heifer was 27 kg. On physical examination of the heifer at 21 months after birth, the teat at fore left was absent and the remaining three teats were normal in shape without any physical abnormalities. Per rectal palpation of the genital organs revealed the normal cervix and uterine horns. It was difficult to palpate the ovaries due to the fat around the organs. Blood samples were taken for cytogenetic and DNA testing. The heifer had normal chromosomal set. The heifer was culled due to its mammary abnormality. This might be the first to report a case of congenital absence of a teat in Japanese Black heifers.

  14. A Novel Lactobacilli-Based Teat Disinfectant for Improving Bacterial Communities in the Milks of Cow Teats with Subclinical Mastitis

    Directory of Open Access Journals (Sweden)

    Jie Yu

    2017-09-01

    Full Text Available Teat disinfection pre- and post-milking is important for the overall health and hygiene of dairy cows. The objective of this study was to evaluate the efficacy of a novel probiotic lactobacilli-based teat disinfectant based on changes in somatic cell count (SCC and profiling of the bacterial community. A total of 69 raw milk samples were obtained from eleven Holstein-Friesian dairy cows over 12 days of teat dipping in China. Single molecule, real-time sequencing technology (SMRT was employed to profile changes in the bacterial community during the cleaning protocol and to compare the efficacy of probiotic lactic acid bacteria (LAB and commercial teat disinfectants. The SCC gradually decreased following the cleaning protocol and the SCC of the LAB group was slightly lower than that of the commercial disinfectant (CD group. Our SMRT sequencing results indicate that raw milk from both the LAB and CD groups contained diverse microbial populations that changed over the course of the cleaning protocol. The relative abundances of some species were significantly changed during the cleaning process, which may explain the observed bacterial community differences. Collectively, these results suggest that the LAB disinfectant could reduce mastitis-associated bacteria and improve the microbial environment of the cow teat. It could be used as an alternative to chemical pre- and post-milking teat disinfectants to maintain healthy teats and udders. In addition, the Pacific Biosciences SMRT sequencing with the full-length 16S ribosomal RNA gene was shown to be a powerful tool for monitoring changes in the bacterial population during the cleaning protocol.

  15. Milk production in sows from a teat in second parity is influenced by whether it was suckled in first parity

    DEFF Research Database (Denmark)

    Farmer, Chantal; Palin, M-F; Theil, Peter Kappel

    2012-01-01

    ) different teats suckled in 2 subsequent lactations (treated, TRT; n = 25). In the first lactation, over half of the teats (Teats 1, 2, 5, 6, and 7 from 1 side of the udder, and Teats 3, 4, and 7 from the other side) were sealed with tape so that they were nonfunctional. During the next lactation, the CTL...... group had the same teats sealed as in the first lactation, whereas the opposite teats were sealed for the TRT group. In both parities, litters were standardized to 7 piglets around birth and to 6 piglets (1 piglet per available teat) at 48 h postpartum. During the second lactation, piglets were weighed...

  16. The association between bedding material and the bacterial counts of Staphylococcus aureus, Streptococcus uberis and coliform bacteria on teat skin and in teat canals in lactating dairy cattle.

    Science.gov (United States)

    Paduch, Jan-Hendrik; Mohr, Elmar; Krömker, Volker

    2013-05-01

    Several mastitis-causing pathogens are able to colonize the bovine teat canal. The objective of this study was to investigate the association between the treatment of sawdust bedding with a commercial alkaline conditioner and the bacterial counts on teat skin and in the teat canal. The study used a crossover design. Ten lactating Holstein cows that were free of udder infections and mastitis were included in the study. The animals were bedded on either untreated sawdust or sawdust that had been treated with a hydrated lime-based conditioner. Once a day, fresh bedding material was added. After 3 weeks, the bedding material was removed from the cubicles, fresh bedding material was provided, and the cows were rotated between the two bedding material groups. Teat skin and teat canals were sampled using the wet and dry swab technique after weeks 1, 2, 3, 4, 5 and 6. Staphylococcus aureus, Streptococcus uberis, Escherichia coli and other coliform bacteria were detected in the resulting agar plate cultures. The treatment of the bedding material was associated with the teat skin bacterial counts of Str. uberis, Esch. coli and other coliform bacteria. An association was also found between the bedding material and the teat canal bacterial counts of coliform bacteria other than Esch. coli. For Staph. aureus, no associations with the bedding material were found. In general, the addition of a hydrated lime-based conditioner to sawdust reduces the population sizes of environmental pathogens on teat skin and in teat canals.

  17. APPLICATION OF CHLORINE DIOXIDE FOR PRE-MILKING TREATMENT OF COW UDDER AND DEVELOPMENT OF MEDICATION FOR POST-MILKING TREATMENT OF DUGS OF COW UDDER

    OpenAIRE

    Komarov V. Y.

    2015-01-01

    In the present article the main research results of investigation of the means of pre-milking and postmilking treatment of cow udder and dugs are presented. The treatment of cow udder dugs produces great effect on the milk quality, the incidence level of mastitis of cows in the herd, extension and pathogenic agents transmission from sick to healthy animals; and also udder treatment provides hygienic protection of udder dugs. Tree concentrations of detergent of chloride dioxide were tested. Wh...

  18. Defining standardized protocols for determining the efficacy of a postmilking teat disinfectant following experimental exposure of teats to mastitis pathogens.

    Science.gov (United States)

    Schukken, Y H; Rauch, B J; Morelli, J

    2013-04-01

    The objective of this paper was to define standardized protocols for determining the efficacy of a postmilking teat disinfectant following experimental exposure of teats to both Staphylococcus aureus and Streptococcus agalactiae. The standardized protocols describe the selection of cows and herds and define the critical points in performing experimental exposure, performing bacterial culture, evaluating the culture results, and finally performing statistical analyses and reporting of the results. The protocols define both negative control and positive control trials. For negative control trials, the protocol states that an efficacy of reducing new intramammary infections (IMI) of at least 40% is required for a teat disinfectant to be considered effective. For positive control trials, noninferiority to a control disinfectant with a published efficacy of reducing new IMI of at least 70% is required. Sample sizes for both negative and positive control trials are calculated. Positive control trials are expected to require a large trial size. Statistical analysis methods are defined and, in the proposed methods, the rate of IMI may be analyzed using generalized linear mixed models. The efficacy of the test product can be evaluated while controlling for important covariates and confounders in the trial. Finally, standards for reporting are defined and reporting considerations are discussed. The use of the defined protocol is shown through presentation of the results of a recent trial of a test product against a negative control. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  19. Efficacy of an internal teat seal associated with a dry cow intramammary antibiotic for prevention of intramammary infections in dairy cows during the dry and early lactation periods

    Directory of Open Access Journals (Sweden)

    Lívio R. Molina

    Full Text Available ABSTRACT: The present study aimed to evaluate the use of an internal dry period teat seal containing bismuth subnitrate (Teatseal®, Zoetis®, Florham Park, Nova Jersey, USA associated with a long-acting cloxacilin preparation (Orbenin® Extra dry cow, Zoetis®, Florham Park, Nova Jersey, USA, in preventing new infections during the dry-off and early postpartum period. A total of 150 Holstein cows (average production of 9,000 kg of milk per lactation, with four functional udder quarters without clinical mastitis was included in the study. All animals were dried-off 60 days before the expected calving date. Two teats positioned diagonal-contralaterally received only dry cow antibiotic, control group C (n=300 and the other two teats, treatment group T (n=300 received dry cow antibiotic and infusion with an internal teat seal. Data from SCC variable were transformed by log base-10 transformation. Duncan’s test was used accepting 5% as the level of statistical significance. The occurrence of intramammary infection (IMI and chronicity rate, and frequency of microorganisms isolated at drying and immediately postpartum in teats of group C and group T were evaluated using a non-parametric Chi-square Test, accepting 10% as the statistical significance level. There was a decrease in the occurrence of new infections in the early postpartum in cows which the sealant was used (C=19.6%, T=11.4%. In the postpartum period, Gram-negative bacteria were isolated from 16 teats in C and seven in T. The greatest reduction was observed for Escherichia coli (8 vs 1 in group T. There was no effect using the internal sealant on the frequency of isolation of environmental Streptococus. The use of sealant reduced the prevalence of subclinical mastitis cows between drying-off and the early postpartum period (C=51% versus T=42% and resulted in a lower somatic cell count (SCC in the treatment group when compared with the control group (T=1,073x103, C=1,793x103. The use of

  20. Relationship between teat-end callosity and occurrence of clinical mastitis

    NARCIS (Netherlands)

    Neijenhuis, F.; Barkema, H.W.; Hogeveen, H.

    2001-01-01

    A longitudinal study in 15 herds, with a total of 2157 cows, was conducted to examine the relationship between teat-end callosity (TEC) and the incidence of clinical mastitis. During the 1.5-yr study period, clinical mastitis was diagnosed by the farmers based on clinical signs. Teat-end callosity

  1. Iodide Residues in Milk Vary between Iodine-Based Teat Disinfectants

    NARCIS (Netherlands)

    French, Elizabeth A; Mukai, Motoko; Zurakowski, Michael; Rauch, Bradley; Gioia, Gloria; Hillebrandt, Joseph R; Henderson, Mark; Schukken, Ynte H; Hemling, Thomas C

    Majority of iodine found in dairy milk comes from the diet and teat disinfection products used during milking process. The objective of this study was to evaluate the effects of 4 iodine-based teat dips on milk iodide concentrations varying in iodine level (0.25% vs. 0.5%, w/w), normal low viscosity

  2. The effect of post milking test dip and suckling on teat skin condition, bacterial colonisation, and udder health

    DEFF Research Database (Denmark)

    Rasmussen, M.D.; Larsen, H.D.

    1998-01-01

    The teat skin of cows was scored (1 : smooth as silk; 2: smooth; 3: slightly rough; 4: rough; 5: cracked; and 6: sores) by trained technicians who moved their fingers down the barrel of the teat with a light touch. Technicians ranked the same population of teats in the same rank order, but their ...

  3. A main factors affecting average number of teats in pigs

    Directory of Open Access Journals (Sweden)

    Emil Krupa

    2016-09-01

    Full Text Available The influence of factors (breed, year and season of farrowing, herd, parity order, sire of litter, total number of born piglets - TNB, number of piglets born alive - NBA, number of weaned piglets - NW, and linear and quadratic regression on the number of teats, found for all piglets in the litter till ten days after born, expressed as arithmetic mean for each litter as sum of all teats number of each piglet in appropriate litter divided by number of piglets in this litter at first litter (ANT1 and second and subsequent litters (ANT2+ were analysed. The coefficient of determination was 0.46 and 0.33 for ANT1 and ANT2+, respectively. The statistically high influence (P<0.001 on ANT1 and ANT2+ was determined for year and season of farrowing, herd, parity order (only for ANT2+ and sire of litter effects. Impact of breed was found only on ANT2+ (P<0.001. The rest of factors have negligible of no impact on traits. Based on the data available for analyses, obtained results will serve as a relevant set-up in developing the model for genetic evaluation for these traits.

  4. Genetic relatedness and virulence factors of bovine Staphylococcus aureus isolated from teat skin and milk.

    Science.gov (United States)

    da Costa, L B; Rajala-Schultz, P J; Hoet, A; Seo, K S; Fogt, K; Moon, B S

    2014-11-01

    The objective of this study was to assess the role of teat skin colonization in Staphylococcus aureus intramammary infections (IMI) by evaluating genetic relatedness of Staph. aureus isolates from milk and teat skin of dairy cows using pulsed-field gel electrophoresis and characterizing the isolates based on the carriage of virulence genes. Cows in 4 known Staph. aureus-positive herds were sampled and Staph. aureus was detected in 43 quarters of 20 cows, with 10 quarters positive in both milk and skin (20 isolates), 18 positive only in milk, and 15 only on teat skin. Quarters with teat skin colonized with Staph. aureus were 4.5 times more likely to be diagnosed with Staph. aureus IMI than quarters not colonized on teat skin. Three main clusters were identified by pulsed-field gel electrophoresis using a cutoff of 80% similarity. All 3 clusters included both milk and skin isolates. The majority of isolates (72%) belonged to one predominant cluster (B), with 60% of isolates in the cluster originating from milk and 40% from teat skin. Genotypic variability was observed within 10 pairs (formed by isolates originating from milk and teat skin of the same quarter), where isolates in 5 out of the 10 pairs belonged to the same cluster. Forty-two virulence factors were screened using PCR. Some virulence factors were carried more frequently by teat skin isolates than by milk isolates or isolates from quarters with high somatic cell counts. Isolates in the predominant cluster B carried virulence factors clfA and clfB significantly more often than isolates in the minor clusters, which may have assisted them in becoming predominant in the herds. The present findings suggest that teat skin colonization with Staph. aureus can be an important factor involved in Staph. aureus IMI. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  5. The pore of the leaf cavity of Azolla species: teat cell differentiation and cell wall projections.

    Science.gov (United States)

    Veys, P; Lejeune, A; Van Hove, C

    2002-02-01

    The differentiation of the specialized secretory teat cells of the leaf cavity pore of Azolla species was investigated at the ultrastructural level with emphasis on their peculiar cell wall projections. The results indicated that the projections are formed as soon as the teat cells complete their differentiation and that their production is principally associated with changes in endoplasmic reticulum profiles. The number of projections increases with the teat cell age and is stimulated under salt and P deficiency stresses. Salt stress also promotes their emergence on Azolla species that under normal conditions do not produce projections. Cytochemical tests on different Azolla species showed that the projection composition is almost identical: proteins, acidic polysaccharides, and pectin are always detected. This study revealed that Azolla teat cell projections differ fundamentally from other types of hitherto described cell wall projections that are considered as remnant structures from cell separation. In contrast, in Azolla teat cells projections are actively produced and compounds are excreted by an exocytotic mechanism. The possible role of the projections in the symbiosis of Azolla spp. with Anabaena azollae is discussed.

  6. Growth of Cinta Senese piglets as affected by location of the suckled teat

    Directory of Open Access Journals (Sweden)

    Martina Bianchi

    2010-01-01

    Full Text Available The experimental animals were 18 Cinta Senese sows (7 primiparous and 11 multiparous and relative purebred off-  spring. Individual weight of piglets was recorded at birth (or shortly afterwards to the nearest 50 g and subsequently  every 3-5 days up to weaning. At each recording, piglets were ranked in decreasing order according to weight within their  respective litters. The behavior of a subsample of 8 sows and litters was observed during suckling, by recording the  teat–piglet coupling. The sows had 12 functional teats, equally distributed in the two symmetric rows, that were num-  bered as pairs in the antero-posterior direction.  Starting from the third week, piglets of multiparous sows showed a faster growth rate than those of the primiparous ones.  Repeatability of the piglets’ weight during the suckling period was high (r = 0.56 and repeatability of rank was even  higher, but decreased up to weaning. Anterior teats were the most occupied and showed the highest suckling fidelity  (consistency of suckling position. Various statistical analyses about the dependence of piglet weight (or weight rank with-  in litter on teat order indicated the highest milk productivity of the first teats and the lowest of the 5th & 6th teat pairs.

  7. Dry cow therapy with a non-antibiotic intramammary teat seal - a review

    Directory of Open Access Journals (Sweden)

    Crispie Fiona

    2004-07-01

    Full Text Available Dry cow antibiotic therapy is used to eliminate existing intramammary infections and to prevent new infections in the dry period. It is implemented as part of a total management system known as the 'Five-Point Plan' for mastitis control. Recent public concerns over the widespread prophylactic use of antibiotics, coupled with an increasing interest in organic farming, have lead to a re-evaluation of the treatment of cows at drying-off. As a result, attention has focussed on the use of novel alternatives to antibiotic therapy at the end of lactation. One such therapy involves the application of a non-antibiotic bismuth-based intramammary teat seal designed for use in cows with low cell counts at the end of lactation. Like the keratin plug that forms naturally in teats of cows that have been dried-off, teat seal forms a physical barrier to invading pathogens. To date, a number of independent studies have shown that teat seal is as effective as traditional dry cow antibiotic products in preventing the occurrence of new infection during the dry period in cows with somatic cell counts of ≤200,000 cells ml-1 at drying-off. This paper reviews the efficacy of teat seal in preventing dry period mastitis in both conventional and organic dairying systems.

  8. Prepartum teat apex colonization with Staphylococcus chromogenes in dairy heifers is associated with low somatic cell count in early lactation.

    Science.gov (United States)

    De Vliegher, S; Laevens, H; Devriese, L A; Opsomer, G; Leroy, J L M; Barkema, H W; de Kruif, A

    2003-04-02

    A high number of dairy heifers freshen with udder health problems. The prevalence of teat apex colonization (TAC) with Staphylococcus chromogenes, one of the most widespread coagulase-negative staphylococci (CNS) in milk samples from freshly calved dairy heifers, was measured cross-sectionally in non-lactating heifers on eight commercial dairy farms in Belgium. The influence of age on this prevalence, and the association between teat apex colonization with S. chromogenes prepartum and quarter milk somatic cell count (SCC) in early lactation were studied. In total, 492 teat apices were sampled from 123 heifers. The age of the heifers varied from 8 to 34 months. Overall, 20% of the heifers had at least one teat apex colonized with S. chromogenes. Of all teats sampled, 10% were colonized with S. chromogenes. The chance of having at least one teat apex colonized with S. chromogenes increased with age of the heifer. The presence of prepartum teat apex colonization with S. chromogenes was not associated with intramammary infection (IMI) early postpartum with the same bacterium. On the contrary, teat apex colonization with S. chromogenes prepartum appeared to protect quarters in the first few days of lactation from having somatic cell count >or=200000cells/ml milk, commonly accepted as the threshold for intramammary infection.

  9. Teat apex colonization with coagulase-negative Staphylococcus species before parturition: Distribution and species-specific risk factors.

    Science.gov (United States)

    De Visscher, A; Piepers, S; Haesebrouck, F; De Vliegher, S

    2016-02-01

    Coagulase-negative staphylococci (CNS) are the main cause of bovine intramammary infections and are also abundantly present in extramammary habitats such as teat apices. Teat apex colonization (TAC) with CNS has already been explored in lactating dairy cows at the species level, whereas this is not true for dry cows and end-term heifers. Therefore, the aim of this observational study was to describe CNS TAC in nonlactating dairy cows and end-term heifers in Flemish dairy herds and to identify associated risk factors at the herd, cow, and quarter level. All CNS were molecularly identified to the species level using transfer RNA intergenic spacer PCR (tDNA-PCR) and sequencing of the 16S rRNA gene, allowing for species-specific statistical analyses using multivariable, multilevel logistic regression. Staphylococcus devriesei, Staphylococcus chromogenes, Staphylococcus haemolyticus, and Staphylococcus equorum were the most frequently isolated species. Staphylococcus chromogenes was the sole species colonizing teat apices of cows and heifers in all herds, whereas large between-herd differences were observed for the other species. Teat apices of red and white Holstein Friesians, of quarters dried off without an internal teat sealer, and swabbed in months with lower precipitation and higher ambient temperature were significantly more likely to be colonized by S. devriesei. Slightly dirty teat apices and teat apices swabbed in months with lower precipitation had higher odds of being colonized by S. chromogenes, whereas teat apices sampled in months with lower precipitation and higher ambient temperature were more likely to be colonized by S. haemolyticus. Dirty teat apices and teat apices swabbed in months with lower ambient temperature in combination with low precipitation had higher odds of being colonized by S. equorum. Diverse factors explaining CNS TAC, yet mostly related to humidity, ambient temperature, and hygiene, substantiate differences in epidemiological

  10. Cane molasses and NaOH teated bagacillo diets for lambs | Chicco ...

    African Journals Online (AJOL)

    Cane molasses and NaOH teated bagacillo diets for lambs. C.F. Chicco, G Garcia, C Fernandez, C.R. Prays. Abstract. The eftect of alkali-treated bag acillo in diets varying in proportion of bagacillo and mollasses was studied in lambs. The bagacillo was treated with a concentration solution of NaOH in a horizontald rum-type ...

  11. Effect of Modified Pre-Milking Sanitizing Approaches on Raw Milk Quality Obtained from the Dairy Farmers of Tawau Area, Sabah

    Directory of Open Access Journals (Sweden)

    Sim Kheng Yuen

    2016-01-01

    Full Text Available The aim of the study was to investigate the raw milk hygiene and quality among the small holder dairy farmers in Tawau area. A total of 216 samples were collected from the respective dairy farmers and milk collecting centre located at Mile 15, Tawau. Preliminary results indicated that the quality of the raw milks obtained at farm level contained were inferior with high bacteria load (> than 107 CFU/ml. The total coliform (2.9-3.8 CFU/mL and Staphylococcus count (2.3-3.6 CFU/mL were relatively high in certain samples. However, none of the food borne pathogens was found. Trace back study revealed that the causes of contamination were attributed by poor hygienic handling among the dairy farmers and insufficient for immediate chilling of raw milk. A significant reduction in bacteria load was observed if the raw milk chilled immediately at farm. The implementation of modified pre-milking sanitizing practices improved the microbiology quality of the raw milks obtained from respective dairy farms. Future study will focus more on the effect of prolong storage towards the microbiological quality of raw milk.

  12. Subclinical and clinical mastitis in heifers following the use of a teat sealant precalving.

    Science.gov (United States)

    Parker, K I; Compton, C; Anniss, F M; Weir, A; Heuer, C; McDougall, S

    2007-01-01

    This study investigated the effect in heifers of infusion of a bismuth subnitrate teat-canal sealant and bacterial intramammary infection (IMI) precalving on prevalence of postcalving IMI and incidence of clinical mastitis in the first 2 wk postcalving. Glands (n = 1,020) from heifers (n = 255) in 5 seasonally calving, pasture-fed dairy herds were randomly assigned within heifer to 1 of 4 treatment groups (no treatment; mammary gland secretion collection; infusion of a teat sealant; or sample collection with infusion of teat sealant). Heifers within a herd were enrolled on one calendar day, 31 d on average before the planned start of the seasonal calving period. Duplicate milk samples were collected from each gland within 4 d after calving for bacterial culture. Herd owners collected duplicate milk samples, before treatment, for bacterial culture from glands they defined as having clinical mastitis. The gland prevalence of IMI precalving was 15.5% and did not differ between herds. Bacteria isolated precalving included coagulase-negative staphylococci (76.9% of all bacteriologically positive samples), Streptococcus uberis (14.1%), Staphylococcus aureus (5.1%), Corynebacterium spp. (3.8%), and others (0.1%). The presence of an IMI precalving increased the risk of an IMI postcalving 3.6-fold and the risk of clinical mastitis 4-fold, relative to no IMI precalving. Infusion of the teat sealant reduced the risk of postcalving IMI due to Strep. uberis by 84%, and of clinical mastitis by 68%. Sampling the glands precalving had no effect on postcalving IMI or on clinical mastitis incidence. Use of an internal teat canal sealant in heifers precalving may be a useful tool for reducing the risk of subclinical and clinical mastitis in heifers.

  13. In vitro efficacy of teat antiseptics against Staphylococcus aureus strains isolated from bovine mastitis

    Directory of Open Access Journals (Sweden)

    Renata Paoli Santos

    2016-08-01

    Full Text Available The process of teat disinfection is a widely accepted component of successful mastitis control programs by reducing the number of bacteria on the teat skin and healing teat lesions. For contagious pathogens such as Staphylococcus aureus, post-milking teat disinfection remains a simple, effective and economical practice for prevention of new intramammary infections (IMIs of lactating dairy cows. Despite the universal acceptance of teat dipping as a method of mastitis control, variations in the susceptibility and resistance profile of mastitis pathogens among antiseptics have been described. Thus, here we sought to explore the in vitro efficacy of the followings antiseptics against S. aureus isolated from IMIs: chlorhexidine (2.0%, chlorine (2.5%, quarternary ammonium (4.0%, lactic acid (2.0% and iodine (0.6%. We used 50 S. aureus strains isolated from bovine IMIs from 50 dairy herds located at Minas Gerais, São Paulo, Paraná and Rio Grande do Sul States (Brazil. The antiseptics were evaluated at four different specific intervals (15, 30, 60 and 300 s. We found a higher activity for quarternary ammonium and chlorhexidine against S. aureus at all time-points, followed by iodine and then chlorine. Lactic acid treatment produced the worst results for all time-points and strains. Due to variations in the sensitivity and resistance profile of antiseptics against S. aureus isolated from IMIs, the effectiveness of the antiseptics against the major mastitis pathogens should be periodically evaluated in dairy farms in an attempt to reduce the rate of new IMIs in the herd.

  14. Communications of Staphylococcus aureus and non-aureus Staphylococcus species from bovine intramammary infections and teat apex colonization.

    Science.gov (United States)

    Mahmmod, Yasser S; Klaas, Ilka Christine; Svennesen, Line; Pedersen, Karl; Ingmer, Hanne

    2018-05-16

    The role of non-aureus staphylococci (NAS) in the risk of acquisition of intramammary infections with Staphylococcus aureus is vague and still under debate. The objectives of this study were to (1) investigate the distribution patterns of NAS species from milk and teat skin in dairy herds with automatic milking systems, and (2) examine if the isolated NAS influences the expression of S. aureus virulence factors controlled by the accessory gene regulator (agr) quorum sensing system. In 8 herds, 14 to 20 cows with elevated somatic cell count were randomly selected for teat skin swabbing and aseptic quarter foremilk samples from right hind and left front quarters. Teat skin swabs were collected using the modified wet-dry method and milk samples were taken aseptically for bacterial culture. Colonies from quarters with suspicion of having NAS in milk or teat skin samples (or both) were subjected to MALDI-TOF assay for species identification. To investigate the interaction between S. aureus and NAS, 81 isolates NAS were subjected to a qualitative β-galactosidase reporter plate assay. In total, 373 NAS isolates were identified representing 105 from milk and 268 from teat skin of 284 quarters (= 142 cows). Sixteen different NAS species were identified, 15 species from teat skin and 10 species from milk. The most prevalent NAS species identified from milk were Staphylococcus epidermidis (50%), Staphylococcus haemolyticus (15%), and Staphylococcus chromogenes (11%), accounting for 76%. Meanwhile, the most prevalent NAS species from teat skin were Staphylococcus equorum (43%), S. haemolyticus (16%), and Staphylococcus cohnii (14%), accounting for 73%. Using reporter gene fusions monitoring transcriptional activity of key virulence factors and regulators, we found that out of 81 supernatants of NAS isolates, 77% reduced expression of hla, encoding a-hemolysin, 70% reduced expression of RNAIII, the key effector molecule of agr, and 61% reduced expression of spa encoding

  15. In vitro growth inhibition of major mastitis pathogens by Staphylococcus chromogenes originating from teat apices of dairy heifers.

    Science.gov (United States)

    De Vliegher, S; Opsomer, G; Vanrolleghem, A; Devriese, L A; Sampimon, O C; Sol, J; Barkema, H W; Haesebrouck, F; de Kruif, A

    2004-07-14

    Earlier field observations suggest that teat apex colonization by Staphylococcus chromogenes pre-partum in dairy heifers protects udder quarters against elevated somatic cell counts early post-partum. To explain these findings, the in vitro inhibitory capability of S. chromogenes from teat apices of heifers towards some major mastitis pathogens was tested using a modified cross-streaking method. Two out of 10 S. chromogenes isolates, both originating from two different teats from the same heifer, consistently inhibited growth of all Staphylococcus aureus, Streptococcus dysgalactiae, and Streptococcus uberis strains, but none of the Escherichia coli strains. The present study, therefore, supports the protective effect of teat apex colonization by S. chromogenes by in vitro production of inhibitory substances.

  16. In vivo studies on lysosubtilin. 3. Efficacy for treatment of mastitis and superficial lesions of the udder and teats in cows.

    Science.gov (United States)

    Biziulevichius, G A; Lukauskas, K

    1998-01-01

    Lysosubtilin is a broad-spectrum preparation of lytic enzymes from Bacillus subtilis designed for veterinary medicine. This study demonstrates its efficacy for the treatment of reproductive system diseases (mastitis, superficial lesions of the udder and teats) in cows. Prior to determination of optimal therapeutic doses, samples taken from the milk and udder skin of sick animals were examined microbiologically. The examinations revealed a high incidence of polymicrobial infections (26.9 and 84.9% for mastitis and superficial udder lesions, respectively) caused by various mixtures of bacteria (both Gram-positive and Gram-negative) and fungi/yeasts. Dose determination studies involved 115 cows with clinical signs of mastitis. The optimal dose for mastitis treatment was found to be 3.5 x 10(6) U lysosubtilin dissolved in 100 mL of distilled water, which was then administered into the mammary gland via the teat canal once daily until recovery. Such a dose yielded statistically significant decreases (P < 0.05) both in the length of time before clinical recovery (2 d versus 4 and 4.5 d with either of the two antibiotic-based traditional drugs) and in the percentage of animals who suffered relapses within a 2-month period following treatment (5% versus 60%, with one of the two drugs). A field experiment involving 106 cows was designed to compare the efficacy of 1% lysosubtilin water-glycerin solution (1:9 v/v) and other traditional medications for the topical treatment of superficial lesions of the udder and teats as well as its potential for mastitis prevention. All drugs used yielded a 100% cure rate, but lysosubtilin application made it possible to achieve a statistically significant decrease (P < 0.05) in the duration of the recovery period (2.5 d versus 4.5 to 5.5 d) when compared with any of the four other drugs tested. Its efficacy for mastitis prevention was at least 3.4 times higher than the efficacy of the other medications used (statistically significant, P < 0

  17. Cross-sectional study to identify staphylococcal species isolated from teat and inguinal skin of different-aged dairy heifers.

    Science.gov (United States)

    Adkins, P R F; Dufour, S; Spain, J N; Calcutt, M J; Reilly, T J; Stewart, G C; Middleton, J R

    2018-04-01

    The purpose of this study was to describe the prevalence and distribution of staphylococcal species on the teat and inguinal skin of dairy heifers across the various stages of the heifer life cycle. The cross-sectional study included 106 Holstein heifers with an age range of 0 d to 27 mo that were selected from 11 different groups, based on housing type and age, on a single dairy operation. A composite swabbing sample including all 4 teats and a second composite sample including both inguinal regions of each heifer were collected using gas-sterilized electrostatic dusters (Swiffers; Procter and Gamble, Cincinnati, OH). Swabbing samples were mixed with 10 mL of sterile saline, agitated, and cultured on mannitol salt agar plates. At 24 h, plates were read and up to 10 staphylococcal colonies were saved for further analysis. Staphylococcal isolates were speciated using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry or PCR amplification and partial sequencing of rpoB or tuf. The prevalence of staphylococci was compared between the inguinal and teat regions using the chi-squared or Fisher's exact test, as applicable. Logistic regression models were used to investigate the relationship between a heifer's age (treated as a quantitative continuous variable) and the probability of isolating a given staphylococcal species from a given body site (inguinal region or teats). Overall, the most common species identified were Staphylococcus haemolyticus followed by Staphylococcus chromogenes, Staphylococcus xylosus, Staphylococcus devriesei, and Staphylococcus sciuri. Staphylococcus aureus was more prevalent on the teat than in the inguinal region, whereas Staphylococcus arlettae was more prevalent in the inguinal region than on the teat. All other staphylococcal species were as likely to be found on the teat skin as the inguinal region skin. Isolation from the inguinal and teat skin was associated with age for Staphylococcus agnetis, S. chromogenes

  18. Safety of food contact silicone rubber: Liberation of volatile compounds from soothers and teats

    DEFF Research Database (Denmark)

    Lund, Kirsten H.; Petersen, Jens Højslev

    2002-01-01

    The release of volatile compounds from soothers and teats made from silicone rubber has been investigated. Firstly, measurements of the total release of volatiles were performed according to the method in the draft European standard (CEN). Weight losses of 0.17-0.80% after four hours at 200 degrees......C were observed using gravimetric measurements. One product had a weight loss above the proposed CEN limit of 0.5%. Secondly, the volatile compounds were identified using a thermal desorption/cold trap injector on a gas chromatograph equipped with infrared spectroscopic (IR) and mass spectrometric (MS...

  19. The influence of milking procedures on cow’s teat tissue, milk yield and milking time

    Directory of Open Access Journals (Sweden)

    Saša Špoljar

    2004-04-01

    Full Text Available The aim of this study was to evaluate the effect of two different milking procedures on teat length and diameter, milk yield and milking time. During the first milking procedure the milker decides when to remove the milking cluster from the udder, while in the second an automatic cluster removal, when milk flow was lower than 200 g/min, was performed. Measurements were made on two commercial farms B and A on 15 randomly chosen cows without any clinical sign of mastitis. There were no significant differencesbetween those farms in teat length and diameter differences before and after the milking. Average milking time on farm A was 6 min and 58 s, while on farm B was 5 min and 3 s. Average milk yield was 12.9 kg on farm B and 13.4 kg on farm A. Milking time was considerably shorter on farm B compared to farm A, while milk yield was almost equal on both farms. Automatic cluster weighting 2 kg removal was performed when milk flow was lower than 200 g/min in order to shorten the time needed to milk the cow, ensuring good udder health.

  20. Design and characterisation of a polyethylene oxide matrix with the potential use as a teat insert for prevention/treatment of bovine mastitis.

    Science.gov (United States)

    Bhattarai, Sushila; Alany, Raid G; Bunt, Craig R; Abdelkader, Hamdy; Rathbone, Michael J

    2015-01-01

    This manuscript reports (for the first time) on antibiotic-free polymeric inserts for the prevention and/or treatment of bovine mastitis. Polyethylene oxide (PEO)-based inserts were prepared using different concentrations of various hydrophilic polymers and water-soluble and water-insoluble drug-release-modifying excipients. A simple and scalable melt-extrusion method was employed to prepare the inserts. The prepared inserts were characterised for their dimension, rheological and mechanical properties. The in vitro release of a model bacteriostatic drug (salicylic acid) from the prepared inserts was studied to demonstrate the effectiveness and reproducibility of the melt-extrusion manufacturing method. Further, the in vitro stability of the inserts was evaluated using gel permeation chromatography (GPC) to monitor any change in molecular weight under real-time and accelerated storage conditions. The investigated inserts were stable at accelerated storage conditions over a period of 6 months. PEO inserts have the potential to serve a dual purpose, act as a physical barrier against pathogens invading the teat canal of cows and possibly control the release of a drug.

  1. Unraveling the microbiota of teat apices of clinically healthy lactating dairy cows, with special emphasis on coagulase-negative staphylococci.

    Science.gov (United States)

    Braem, G; De Vliegher, S; Verbist, B; Piessens, V; Van Coillie, E; De Vuyst, L; Leroy, F

    2013-03-01

    Swab samples (n=72) obtained from the teat apex of lactating dairy cows without visual signs of inflammation (n=18) were gathered on 2 well-managed Flemish dairy herds (herds 1 and 2) during the same month to assess the bacterial diversity of teat apices before milking. A combination of both culture-dependent [plating and (GTG)(5)-PCR fingerprinting of the colonies] and culture-independent [denaturing gradient gel electrophoresis (PCR-DGGE)] techniques indicated that the teat apices contain a wide diversity of bacterial genera. Despite a low bacterial load, 20 bacterial genera of 3 phyla (Actinobacteria, Firmicutes, and Proteobacteria) were present. The most prevalent bacteria were the coagulase-negative staphylococci (CNS), encompassing a total of 15 species, which were identified to the species level using a combination of (GTG)(5)-PCR fingerprinting, gene sequencing (16S ribosomal RNA and rpoB genes), and a novel PCR-DGGE technique based on the tuf-PCR amplicon. Overall bacterial diversity did not differ significantly between the herds or between noninfected and subclinically infected quarters in herd 1. In herd 1, borderline significant lower CNS species diversity was found on teat apices of noninfected quarters compared with subclinically infected quarters. The most prevalent CNS species were Staphylococcus haemolyticus and Staphylococcus equorum in both herds and Staphylococcus carnosus in herd 2. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  2. Communications of Staphylococcus aureus and non-aureus Staphylococcus species from bovine intramammary infections and teat apex colonization

    DEFF Research Database (Denmark)

    Mahmmod, Yasser S.; Klaas, Ilka Christine; Svennesen, Line

    2018-01-01

    The role of non-aureus staphylococci (NAS) in the risk of acquisition of intramammary infections with Staphylococcus aureus is vague and still under debate. The objectives of this study were to (1) investigate the distribution patterns of NAS species from milk and teat skin in dairy herds with au...

  3. Distribution of CNS Species on Teat Skin and in Milk Samples from Dairy Cows in Automatic Milking Systems

    DEFF Research Database (Denmark)

    Mahmmod, Yasser; Svennesen, Line; Pedersen, Karl

    identified in milk samples. Staphylococcus chromogenes was detected in both milk (n= 2) and teat skin (n= 1) samples. Data collection will be finished in April 2017. The final results will give new insights into herd specific CNS species patterns and the microbial ecology and epidemiology of common CNS...

  4. Short communication: quantification of the transmission of microorganisms to milk via dirt attached to the exterior of teats

    NARCIS (Netherlands)

    Vissers, M.M.M.; Driehuis, F.; Giffel, M.C.T.; Jong, de P.; Lankveld, J.M.G.

    2007-01-01

    Pathogens and spoilage microorganisms can be transmitted to milk via dirt (e.g., feces, bedding material, soil, or a combination of these) attached to the exterior of the cows¿ teats. To determine the relevance of this pathway and to perform quantitative microbial risk analysis of the microbial

  5. Effect of liner design, pulsator setting, and vacuum level on bovine teat tissue changes and milking characteristics as measured by ultrasonography

    Directory of Open Access Journals (Sweden)

    Gleeson David E

    2004-05-01

    Full Text Available Friesian-type dairy cows were milked with different machine settings to determine the effect of these settings on teat tissue reaction and on milking characteristics. Three teat-cup liner designs were used with varying upper barrel dimensions (wide-bore WB = 31.6 mm; narrow-bore NB = 21.0 mm; narrow-bore NB1 = 25.0 mm. These liners were tested with alternate and simultaneous pulsation patterns, pulsator ratios (60:40 and 67:33 and three system vacuum levels (40, 44 and 50 kPa. Teat tissue was measured using ultrasonography, before milking and directly after milking. The measurements recorded were teat canal length (TCL, teat diameter (TD, cistern diameter (CD and teat wall thickness (TWT. Teat tissue changes were similar with a system vacuum level of either 50 kPa (mid-level or 40 kPa (low-level. Widening the liner upper barrel bore dimension from 21.0 mm (P

  6. Pengaruh teat dipping menggunakan dekok daun kersen (Muntingia calabura L. terhadap tingkat kejadian mastitis

    Directory of Open Access Journals (Sweden)

    Indra Kurniawan

    2014-02-01

    Full Text Available ABSTRACT: The study was carried out in Sidomulyo Village, Jabung, Malang Regen-cy from April 6th to May 6th, 2013. The objective of the study was to evaluate the influ-ence of Kersen leaf (Muntingia calabura L extract to reduce mastitis incidents. The materials used in this study were 15 Friesian Holstein crossbreed lactating dairy cows, chemical antiseptic, and Kersen leaf extract. The study used experiment Randomized Block Design with 3 treatments and 5 replications. The result shows that Kersen leaf extract was significantly (p>0.05 able to reduce mastitis incidents particularly 20% of Kersen leaf extract composition. The study suggests that Kersen leaf extract can be used as an effective substance in dipping solution for dairy cows Mastitis control program. Keywords: Kersen leaf extract, mastitis, teat dipping, dairy cows

  7. DISTRIBUTION OF COAGULASE-NEGATIVE STAPHYLOCOCCI SPECIES ON TEAT SKIN AND IN MILK SAMPLES FROM DAIRY COWS IN AUTOMATIC MILKING SYSTEMS

    DEFF Research Database (Denmark)

    Mahmmod, Yasser Saadeldien Ibrahim; Svennesen, Line; Pedersen, Karl

    ) to identify the predisposing cow level risk factors for specific CNS IMI and teat colonization.In each herd, 30- 40 cows with somatic cell counts > 200,000 cells/ml in the previous milk recording are randomly selected and teat skin swabs and aseptic quarter foremilk samples are taken. Teat skin swabs...... are collected using a modified wet-dry method. First a wet swab immersed in ¼ Ringer’s solution followed by a dry swab are rotated 360° around the teat canal orifice and both swab tips transferred into one tube with 2 ml of ¼ Ringer’s solution. Samples are transported on ice for culturing in the laboratory...

  8. Benefits of automated acclimatization during the pre-milking phase of lactating girolando cows Benefícios da climatização automatizada na pré-ordenha de vacas girolando em lactação

    Directory of Open Access Journals (Sweden)

    Irenilson M. da Silva

    2011-10-01

    Full Text Available The aim of this paper was to evaluate the automated acclimatization effects during pre-milking of cows on thermal conditioning, physiology, milk production and cost-benefit of the automated adiabatic evaporative cooling system (AECS. The treatments 20; 30; 40 min and control consisted of exposure time of pre-milking cows to the automated AECS. Sixteen cows were used with an average daily milk yield of 19 kg, distributed in a 4 x 4 Latin square design. The Tukey's test (PObjetivou-se com esta pesquisa avaliar os efeitos da climatização na pré-ordenha sobre o acondicionamento térmico, fisiologia, produção de leite e relação custo/benefício do sistema de resfriamento adiabático evaporativo (SRAE automatizado. Os tratamentos adotados foram os tempos de exposição dos animais ao SRAE no curral de espera, 20; 30; 40 min e o tratamento-controle. Utilizaram-se 16 vacas com produção de 19 kg de leite dia-1, adotando-se delineamento em quadrado latino 4 x 4 e comparação entre as médias pelo teste de Tukey (P<0,05. Foram registradas as variáveis ambientais temperatura de bulbo seco (Tbs e umidade relativa (UR a cada minuto, o que permitiu determinar a eficiência do sistema por meio do índice de temperatura e umidade (ITU. A frequência respiratória (FR, temperatura retal (TR e temperatura de pelame (TP foram medidas antes e depois da climatização. O tratamento 40 min permitiu manter as variáveis ambientais e os índices de conforto entre os limites recomendados. As variáveis fisiológicas (FR, TR e TP mostraram valores inferiores no tratamento 40 min, com aumento de 3,66% na produção de leite, quando comparado com o controle. O investimento promoveu acréscimo na receita mensal de R$ 1.992,67 com tempo de retorno do capital de 43 dias.

  9. Update on the development of a novel dry cow therapy using a bismuth-based intramammary teat seal in combination with the bacteriocin lacticin 3147

    Directory of Open Access Journals (Sweden)

    Crispie Fiona

    2004-11-01

    Full Text Available Public concerns over the widespread prophylactic use of antibiotics have led to a search for alternatives to dry cow therapy for the prevention of intramammary infections. A popular alternative is to infuse a teat seal at drying-off. The teat seal is a viscous non-antibiotic formulation and when it is infused into the teat canal and the teat sinus it forms an internal seal that provides a physical barrier to invasion by mastitis-causing pathogens. Enhancement of teat seal formulations may be achieved using non-antibiotic additives such as bacteriocins, potent proteins produced by some bacteria that have the ability to kill other microorganisms. This paper traces the history of investigations at Moorepark Research Centre into the efficacy of teat seal plus lacticin 3147, a bacteriocin produced by Lactococcus lactis DPC3147, in the prevention of intramammary infections in dry cows. Indications from on-going investigations are that a dry cow formulation combining the two products has considerable potential as a non-antibiotic prophylactic product.

  10. [Correlations between the vitality of newborn piglets, teat order, mortality, and live weight development up to weaning].

    Science.gov (United States)

    Hoy, S; Lutter, C; Puppe, B; Wähner, M

    1995-06-01

    Investigations with 693 piglets have shown, that suckling piglets with preference of cranial teat pairs were significantly superior to their littermates in all parameters of early postnatal vitality: they stood up and took in first colostrum earlier and showed a lower postnatal drop in rectal temperature in comparison with their siblings. Piglets in cranial teat position had the highest daily gain (205 g, p vitality of piglets post natum on live weight development and mortality up to 28th day of age were shown. The faster piglets took in colostrum after birth and the lower postnatal drop in rectal temperature was, the higher was the obtained daily gain during suckling period. Piglets which died within the first 7 or 28 days of age had needed a significantly longer time till first postnatal colostrum intake and a more pronounced drop in rectal temperature in comparison with their littermates.

  11. Effect of dry period length on the effect of an intramammary teat sealant on the risk of mastitis in cattle treated with antibiotics at drying off.

    Science.gov (United States)

    Laven, R A; Balcomb, C C; Tulley, W T; Lawrence, K E

    2014-07-01

    The aim of this study was to evaluate, under farm conditions, the use of a teat sealant in addition to whole herd dry cow antibiotic therapy on the risk of clinical mastitis in dairy cattle at pasture, and to evaluate the impact of dry period length on that risk and the impact of the teat sealant on that risk. Dairy cows in three herds which used routine whole herd antibiotic therapy were randomly assigned to receive either treatment with an internal teat sealant (n=322) or no additional treatment (n=313) at drying-off between March and May 2010. All clinical mastitis cases during the dry period and to the end of the subsequent lactation were recorded by farm staff; factors affecting risk of clinical mastitis were then analysed using a Cox proportional hazards model. Median duration of the dry period was 112 days with >25% of cows having a dry period >130 days. The incidence risk of mastitis during lactation for cows treated with teat sealant was 9.9 (95% CI=6.9-13.7) cases per 100 cows compared with 17.9 (95% CI=13.8-22.6) cases per 100 cows for cows treated with antibiotic alone. The addition of a teat sealant to dry cow antibiotic therapy decreased the risk of clinical mastitis only in the first 33 days after calving (Hazard risk 0.24 (95% CI=0.12-0.48)). Length of dry period did not significantly affect the risk of clinical mastitis, or the effect of adding teat sealant to dry cow antibiotic therapy on the risk of clinical mastitis. In these herds where, based on the mastitis history, whole herd antibiotic therapy had been recommended, the use of a teat sealant significantly reduced the risk of clinical mastitis. This effect was limited to the first 33 days after calving; subsequently there was no significant effect of treatment. There was no effect of dry period length on risk of clinical mastitis, nor any significant interaction with treatment. Combination therapy with teat sealant and antibiotic was effective under New Zealand conditions in herds using whole

  12. USE OF HYDROALCOHOLIC EXTRACT OF Schinus terebinthifolius Raddi IN PRE- AND POST-MILKING ANTISEPSIS OF THE TEAT IN DAIRY COWS

    Directory of Open Access Journals (Sweden)

    Ângela Faccin

    2016-01-01

    Full Text Available Medicinal plants have been used for centuries as an alternative treatment for health problems. Schinus terebinthifolius Raddi is a median tree that belongs to the Anacardiaceae family. The antibacterial effect of leaves extract of this plant has already been demonstrated. The objective of this study was to test a substance derived from this plant to be used in pre- and post-milking teat antisepsis. The hydroalcoholic extract of Brazilian pepper tree was used in opposite quarters for twelve consecutive weeks, and commercial iodine was used as control. None of the indices analyzed – black background mug, CMT, intramammary infections, skin health, and teat health – showed a statistical difference between the treatments, suggesting that the plant extract can be used in pre- and post-milking teat antisepsis, as a substitute for conventional products for herds in an agroecological production system.

  13. Low cost driver device for microclimate maintenance in the pre-milking of dairy cattle Dispositivo controlador de baixo custo para a manutenção do microclima na pré-ordenha de bovinos leiteiros

    Directory of Open Access Journals (Sweden)

    Irenilson M. da Silva

    2013-02-01

    Full Text Available Due to the importance of the environment on animal production and thus environmental control, the study aims to build a system for monitoring and control the meteorological variables, temperature and relative humidity, low cost, which can be associated with an evaporative cooling system (ECS. The system development included all the stages of assembly, test and laboratory calibration, and later the validation of the equipment carried in the field. The validation step showed results which allowed concluding that the system can be safely used in the monitoring of these variables. The controller was efficient in management of the microclimate in the waiting corral and allowed the maintenance of the air temperature within the comfort range for dairy cattle in pre-milking with averaged 25.09 ºC during the afternoon. The equipment showed the lower cost (R$ 325.76 when compared to other middle market (R$ 450.00.Devido à importância do ambiente na produção animal e, portanto, do controle ambiental adequado, objetivou-se com este trabalho a construção de um sistema de monitoramento e controle das variáveis meteorológicas, temperatura e umidade relativa do ar, de baixo custo, associado a um sistema de resfriamento adiabático evaporativo (SRAE. O desenvolvimento do sistema controlador compreendeu as etapas de montagem, teste e aferição em laboratório e, posteriormente, a etapa de validação do equipamento realizada a campo. A etapa de validação apresentou resultados que permitiram concluir que o sistema pode ser utilizado com segurança no monitoramento e controle dessas variáveis por meio dos atuadores. O controlador mostrou-se eficiente no manejo do microclima no curral de espera e permitiu a manutenção da temperatura do ar dentro da faixa de conforto para bovinos leiteiros na pré-ordenha, apresentando média de 25,09 ºC durante o turno da tarde. O equipamento apresentou custo inferior (R$ 325,76 quando comparado à média de outros

  14. Associations of soft flooring materials in free stalls with milk yield, clinical mastitis, teat lesions, and removal of dairy cows.

    Science.gov (United States)

    Ruud, L E; Bøe, K E; Osterås, O

    2010-04-01

    The objective was to test if there was an association between free-stall base softness and milk yield, incidence of clinical mastitis (CM), teat lesions, and removal of cows. In a questionnaire sent to 1,923 dairy farms presumed to be using free-stall housing, farmers were asked for information regarding housing and stall base; for example, the year of installation and the product name or brand of their mats or mattresses. This information was merged with data for milk yield, CM, teat lesions, and removal of cows extracted from the Norwegian Dairy Herd Recording System for the years after installation of mats or mattresses. After exclusion of invalid contributions, the data set consisted of 29,326 lactations for milk yield distributed over 363 free-stalled herds in Norway. The farms were stratified into 5 categories according to the softness of the stall surface measured as millimeter impact of a sphere with a diameter of 120 mm at 2-kN load: 1=concrete, softness of 0mm; 2=rubber, softness of 1 to 8mm; 3=soft mats, softness of 9 to 16 mm; 4=multilayer mats, softness of 17 to 24 mm; and 5=mattresses, softness over 24 mm. Lactation curves were estimated as modified Wood's lactation curves using test-day data and mixed models with repeated measurements, adjusting for days in milk, parity, and softness of free-stall flooring. Herds on concrete free-stall bases yielded 6,727+/-146 kg of milk from 5 to 305 days in milk. In comparison, herds showed a decrease of 0.3% on rubber, an increase of 2.4% on soft mats, an increase of 4.5% on multilayer mats, and an increase of 3.9% on mattresses. Compared with concrete, the hazard ratio (HR) of CM was less on rubber, multilayer mats, and mattresses [HR=0.89 (0.79-0.99), 0.85 (0.73-0.996), and 0.80 (0.73-0.88), respectively]. Compared with concrete, the HR of teat lesions was less on rubber, soft mats, multilayer mats, and mattresses [HR=0.41 (0.26-0.65), 0.33 (0.24-0.44), 0.12 (0.04-0.38), and 0.47 (0.33-0.67), respectively]. The

  15. Efficacy of a high free iodine barrier teat disinfectant for the prevention of naturally occurring new intramammary infections and clinical mastitis in dairy cows.

    Science.gov (United States)

    Martins, C M M R; Pinheiro, E S C; Gentilini, M; Benavides, M Lopez; Santos, M V

    2017-05-01

    Using a natural exposure trial design, the goal of our study was to evaluate the clinical efficacy of an iodine teat disinfectant with barrier properties and a high level of free iodine relative to a conventional iodine teat disinfectant with no barrier properties and low levels of free iodine. During the 18 wk of the trial, quarter milk samples were collected every 2 wk from 385 dairy cows from 2 herds. Cows on both farms were assigned in a balanced way according to milk yield, number of lactation, days in milk, somatic cell count (SCC) and microbiology culture pretrial into one of following groups: nonbarrier post milking teat disinfectant (NBAR; n = 195 cows; 747 quarters) or barrier postmilking teat disinfectant (BAR; n = 190 cows; 728 quarters). Afterward, at each scoring date every 2 wk, milk SCC was quantified in samples from all mammary quarters and microbiologic culture was only performed on milk samples with SCC >200,000 cells/mL for multiparous cows and SCC >100,000 cells/mL for primiparous cows. A new intramammary infection (NIMI) was defined when a quarter had milk SCC 200,000 cells/mL for multiparous cows and >100,000 cells/mL for primiparous cows, and positive microorganism isolation. A quarter could have several NIMI, but only 1 case per specific pathogen was considered. The most frequently isolated microorganism group on both farms was Streptococcus spp. (6.25% of total mammary quarters), followed by coagulase-negative staphylococci (3.6%) and Corynebacterium spp. (1.5%). In the present study, an interaction occurred between treatment and week of trial on the incidence risk of NIMI. Quarters disinfected with BAR had 54 and 37% lower odds of NIMI than quarters disinfected with NBAR at 8 and 16 wk of the trial, respectively; whereas at other weeks of the study both products had similar incidence risks of NIMI. Overall, teats disinfected with BAR had 46% lower odds of acquiring a clinical mastitis than those disinfected with NBAR. We concluded that

  16. USE OF HYDROALCOHOLIC EXTRACT OF Schinus terebinthifolius Raddi IN PRE- AND POST-MILKING ANTISEPSIS OF THE TEAT IN DAIRY COWS

    OpenAIRE

    Faccin, Ângela; Schuch, Luiz Filipe Damé; Schiavon, Diane Bender Almeida; Gonçalves, Carolina Lambrecht; Mota, Fernanda Voight; Lessa, Lisiane Ferreira

    2016-01-01

    Abstract Medicinal plants have been used for centuries as an alternative treatment for health problems. Schinus terebinthifolius Raddi is a median tree that belongs to the Anacardiaceae family. The antibacterial effect of leaves extract of this plant has already been demonstrated. The objective of this study was to test a substance derived from this plant to be used in pre- and post-milking teat antisepsis. The hydroalcoholic extract of Brazilian pepper tree was used in opposite quarters for ...

  17. Antibacterial activities of coagulase-negative staphylococci from bovine teat apex skin and their inhibitory effect on mastitis-related pathogens.

    Science.gov (United States)

    Braem, G; Stijlemans, B; Van Haken, W; De Vliegher, S; De Vuyst, L; Leroy, F

    2014-05-01

    To explore antibacterial activities of coagulase-negative staphylococci (CoNS) from teat apices of dairy cows towards mastitis-causing pathogens. Of 254 CoNS, 38 displayed bacteriocin-like activity after a first screening. Seven of these strains displayed activity against at least one mastitis-related pathogen (Streptococcus uberis, Streptococcus dysgalactiae and Staphylococcus aureus). Staphylococcus chromogenes L217 displayed the strongest inhibitory effect, being active against all tested mastitis-related pathogens and most tested CoNS. Based on cation exchange and reversed-phase chromatography, in addition to N-terminal Edman degradation and PCR, the antibacterial peptide was identified as a nukacin-type bacteriocin and named nukacin L217. Although staphylococcal bacteriocins are generally found in the cell-free supernatants of liquid cultures, Staph. chromogenes L217 only led to detectable activity when grown on agar medium. Bacteriocin-like activities are not uncommon among CoNS from teat apices and may inhibit mastitis-causing pathogens, as found for nukacin L217 production by Staph. chromogenes L217. Nukacin L217 is the first identified bacteriocin of the species Staph. chromogenes and displays unusual production kinetics, that is, requiring surface growth of its producer. The fact that nukacins are produced by different CoNS species suggests a role in the teat skin ecosystem. © 2014 The Society for Applied Microbiology.

  18. An observational cohort study on persistency of internal teat sealant residues in milk after calving in dairy cows.

    Science.gov (United States)

    Kabera, Fidèle; Dufour, Simon; Keefe, Greg; Roy, Jean-Philippe

    2018-04-04

    Our objectives were to evaluate the prevalence of quarters with an observable internal teat sealant (ITS) plug at first milking following calving and investigate persistency of ITS residues in milk after calving. An observational cohort study was carried out on 557 quarters of 156 cows treated with ITS in 6 farms in Quebec, Canada. The presence of an ITS plug at first milking and ITS residues in milk at each milking were observed by producers. The effects of various factors on the odds of observing an ITS plug and persistency of ITS residues in milk were studied using generalized logistic mixed and generalized negative binomial mixed models, respectively. Milk samples were taken on the day before dry-off and on 2 occasions after calving for bacterial identification to detect intramammary infection (IMI) using bacteriological culture followed by MALDI-TOF identification. The association between the absence of an ITS plug and the presence of new IMI was assessed using a mixed logistic regression model. Internal teat sealant plugs after calving were more often observed in rear quarters and in quarters receiving ITS alone at drying-off versus antimicrobial and ITS. We observed an average (standard deviation) persistency of 4.0 d (2.3 d). When an ITS plug was still present at first milking (83% of quarters), the elimination of ITS residues in milk after calving was significantly longer (4.5 d, on average) compared with 1.2 d when an ITS plug was absent. In cows with an ITS plug at calving, we observed a higher number of days of excretion in older cows. When a plug could not be observed, rear quarters, older cows, and cows with a long dry period duration excreted ITS residues for a significantly longer period. The lack of a significant association between the absence of a plug and the odds of new IMI at calving suggests that despite the loss of the plug, cows were still protected against new IMI. Although we were able to highlight some statistically significant risk

  19. Effects of alternative deep bedding options on dairy cow preference, lying behavior, cleanliness, and teat end contamination.

    Science.gov (United States)

    Wolfe, T; Vasseur, E; DeVries, T J; Bergeron, R

    2018-01-01

    Cows spend more time lying down when stalls are soft and dry, and bedding plays a key role in the comfort of the lying surface. The first objective of this study (experiment 1) was to compare cow preference for 2 types of alternative deep-bedding materials, switchgrass and switchgrass-lime, using wheat straw on a rubber mat as a control. Nine Holstein lactating cows were submitted in trios to a 3-choice preference test over 14 d (2 d of adaptation, 3 d of restriction to each stall, and 3 d of free access to all 3 stalls). Cows were housed individually in pens containing 3 stalls with different lying surfaces: (1) rubber mat with chopped wheat straw (WS); (2) deep-bedded switchgrass (SG); and (3) deep-bedded switchgrass, water, and lime mixture (SGL). The second objective (experiment 2) was to test, in freestall housing, the effects of these 3 types of bedding on lying behavior, cow cleanliness, and teat end bacterial contamination. Bedding treatments were compared in a 3 × 3 Latin square design using 24 cows split into groups of 8, with bedding materials being switched every 4 wk. Lying behavior was measured with data loggers in both studies. During experiment 1, cows chose to spend more time lying and had more frequent lying bouts on SG (9.4 h/d; 8.2 bouts/d) than on SGL (1.0 h/d; 0.9 bouts/d). They also spent more time standing and stood more frequently in stalls with SG (2.0 h/d; 10.1 bouts/d) than in those with SGL (0.6 h/d; 2.6 bouts/d), and stood longer in stalls with SG than with WS (0.6 h/d). In experiment 2, the total lying time, frequency of lying bouts, and mean lying bout duration were, on average, 9.7 ± 1.03 h/d, 8.2 ± 0.93 bouts/d, and 1.2 ± 0.06 h/bout, respectively, and did not differ between treatments. No treatment effects were found for cow cleanliness scores. Bedding dry matter was highest for SG (74.1%), lowest for SGL (63.5%), and intermediate for WS (68.6%) [standard error of the mean (SEM) = 1.57%]. This may explain the higher teat end

  20. Análise espacial das condições térmicas do ambiente pré-ordenha de bovinos leiteiros sob regimes de climatização Spatial analysis of thermal conditions of the pre-milking dairy cattle under climatization regimes

    Directory of Open Access Journals (Sweden)

    Irenilson M. da Silva

    2012-08-01

    Full Text Available Propõe-se, com este trabalho, caracterizar a variabilidade espacial da temperatura do ar na sala de pré-ordenha a partir de diferentes tempos de operação do sistema de resfriamento adiabático evaporativo automatizado. A variável temperatura do ar foi registrada em 35 pontos equidistantes 1 m, na forma de malha, para o estudo da variabilidade espacial e a construção de mapas por krigagem. Foram considerados diferentes tempos de exposição dos animais a climatização no curral de espera, 20, 30, 40 min e controle (0 min. Por meio dos resultados obtidos foi possível verificar que o uso da geoestatística possibilitou definir áreas com diferentes variabilidades espaciais para temperatura do ar, definindo áreas específicas na sala de pré-ordenha que apresentaram valores acima do recomendado para o conforto térmico animal. O sistema de climatização garantiu melhor acondicionamento térmico no tempo de exposição de 40 min, obtendo temperatura média dentro da condição de conforto térmico para vacas em lactação.The objective of this study was to characterize the spatial variability of air temperature in pre-milking room for different operation times of the automated adiabatic evaporative cooling system. The air temperature was monitored at 35 points, in regular intervals of 1 m, as a grid, to study the spatial variability and construction of kriging maps. Different times of exposure of the animals to the cooling system in the waiting room (20, 30, 40 min and control - 0 min were considered. Through the results, it was observed that use of geostatistics enabled to define areas with different spatial variability for temperature, identifying specific areas in the pre-milking room that showed values above the recommended levels for the thermal comfort. The cooling system ensured the better thermal condition with the 40 min exposure, obtaining on average temperature within the thermal comfort condition for lactating cows.

  1. Effectiveness of Dry Cow Therapy Comprising Antibiotic Treatment, Internal Teat Sealant, and α-Tocopherol Against New Intramammary Infections in Cows

    Directory of Open Access Journals (Sweden)

    Cengiz Mehmet

    2015-04-01

    Full Text Available The aim of this study was to evaluate the preventive effectiveness of dry cow therapy based on antibiotic, internal teat sealant, and α-tocopherol administered separately or in various combinations at drying-off The study was performed on 322 uninfected quarters of 95 cows originating from three dairy herds. The new intramammary infection rates after calving were measured to evaluate the effectiveness. The quarters were divided into six groups differing in treatment, namely: control group (group C, n = 40 and five treatment groups. Treatment groups were arranged as follows: group A (antibiotic alone, n = 81, group AS (antibiotic + sealant, n = 40, group AST (antibiotic + sealant + α-tocopherol, n = 40, group T (α-tocopherol alone, n = 40, group S (sealant alone, n = 81. New infection rate amounted to 47.5% in group C. The treatment in group AST significantly prevented from the occurrence of new intramammary infections (12.5%, P 0.05, although the use of the sealant alone (group S decreased the risk of new infection (24.7%, P 0.05. Increased α-tocopherol level (P < 0.05 was detected after calving in the quarters from cows that received α-tocopherol injections. In conclusion, the combination of antibiotic, internal teat sealant, and α-tocopherol used in dry cow therapy showed a significantly better preventive effect against new intramammary infections, than the therapeutics administered separately.

  2. Loengud. Kontsert. Koorid. Teated

    Index Scriptorium Estoniae

    2006-01-01

    Loengust "Muusikaesseistika I" 19. sept. Lai t 34 aud 72. Kontsertidest: Tartu raekojas 22. sept. esineb hispaania ansambel Zarabanda, TÜ aulas 20. sept. esinevad "Meistrite akadeemia" sarjas Pille Lille Muusikute Toetusfondi laureaat Anna-Liisa Bezrodnõi viiulil ja Thea Nestor klaveril. TÜ Kammerkoor ja Tartu Akadeemiline Meeskoor võtavad vastu uusi liikmeid (info: www.ut.ee/TYKK ja www.tam.eu). Tartu Ülikooli rahvakunstiansambel ootab uusi tantsijaid (info: www.ut.ee)

  3. A comparison of the effect of short-acting and long-acting cloxacillin-based dry-cow therapy on somatic cell counts after calving in cows also given internal teat sealants.

    Science.gov (United States)

    Whitfield, L K; Laven, R A

    2018-01-01

    To compare, in cows treated with an internal teat sealant, the effect of short-acting and long-acting cloxacillin-based dry-cow therapy on somatic cell counts (SCC) after calving. Cows from a spring-calving, pasture-based dairy farm in the Manawatu-Whanganui region of New Zealand were randomly allocated to receive either a short-acting cloxacillin and ampicillin dry-cow therapy and internal teat sealant (n=291) or a long-acting cloxacillin and ampicillin dry-cow therapy and internal teat sealant (n=288) at the end of lactation. Cows were managed on-farm with routine husbandry procedures through the dry period and following calving. A multivariable logistic regression model was used to determine the association between length of action of dry-cow therapy and the proportion of cows with a SCC >150,000 cells/mL at the first herd test after calving. Age of cow, mean SCC for the preceding season and interval from calving to the first post-calving herd test were all associated with the proportion of cows with an individual SCC >150,000 cells/mL at the first herd test (pcow therapy was not associated with decreased odds of cows having a SCC >150,000 cells/mL at the first herd test compared with treatment with long-acting dry-cow therapy (OR=0.724; 95% CI=0.40-1.30). In this herd, which routinely used internal teat sealants, the use of short-acting cloxacillin-based dry-cow therapy did not result in an increased proportion of cows with elevated SSC post-calving. This was a single farm, single year study but indicates that in this herd, changing from a long-acting to a short-acting antimicrobial may have no impact on the prevalence of subclinical mastitis.

  4. Comparison of cephalonium alone and in combination with an internal teat sealant for dry cow therapy in seasonally calving dairy cows.

    Science.gov (United States)

    Bates, A J; Chambers, G; Laven, R A

    2016-03-01

    To assess the effect of combining an internal teat sealant (ITS) and a long-acting cephalonium-based dry cow therapy (DCT) on the prevalence of cows with a somatic cell count (SCC) >150,000 cells/mL 60-80 days after calving, and the incidence of clinical mastitis diagnosed by farm staff in the first 100 days after calving. Cows from a spring-calving, pasture-based, dairy farm in the South Canterbury region of New Zealand were randomly allocated to receive cephalonium DCT (n=289) or cephalonium and internal teat sealant (n=304) at the end of lactation. Cows were inspected twice daily by farm staff during the dry period and following calving for signs of mastitis. Individual SCC were determined from herd tests conducted in the previous lactation and following calving. Logistic regression models were used to determine relationships with the prevalence of cows with a SCC >150,000 cells/mL after calving, and survival analysis was used to model time to the first case of clinical mastitis following calving at the cow and quarter level. The OR for a cow with a SCC >150,000 cells/mL after calving, including age and individual SCC in the preceding lactation in the model, was 0.53 (95% CI=0.32-0.89) for cows treated with combination therapy compared to cows receiving cephalonium (p=0.017). At the cow level, including age and preceding SCC in the model, the hazard ratio for diagnosis of clinical mastitis by farm staff in the first 100 days of lactation was 0.60 (95% CI=0.39-0.98) for cows treated with combination therapy compared to cows receiving cephalonium (p=0.04). At the quarter level, the hazard ratio for diagnosis of clinical mastitis, with age included in the model, was 0.41 (95% CI=0.23-0.74) for the combination therapy compared to cephalonium alone (pmastitis diagnosed by farm staff in the 100 days after calving, and the prevalence of cows with a SCC >150,000 cells/mL 60-80 days after calving. This study adds to the evidence that the prevention of intra mammary

  5. Bovine teat microbiome analysis revealed reduced alpha diversity and significant changes in taxonomic profiles in quarters with a history of mastitis

    Directory of Open Access Journals (Sweden)

    Helene eFalentin

    2016-04-01

    Full Text Available Mastitis is a mammary gland inflammatory disease often due to bacterial infections. Like many other infections, it used to be considered as a host-pathogen interaction driven by host and bacterial determinants. Until now, the involvement of the bovine mammary gland microbiota in the host-pathogen interaction has been poorly investigated, and mainly during the infectious episode. In this study, the bovine teat microbiome was investigated in 31 quarters corresponding to 27 animals, which were all free of inflammation at sampling time but which had different histories regarding mastitis: from no episode of mastitis on all the previous lactations (Healthy quarter, Hq to one or several clinical mastitis events (Mastitic quarter, Mq. Several quarters whose status was unclear (possible history of subclinical mastitis were classified as NDq. Total bacterial DNA was extracted from foremilk samples and swab samples of the teat canal. Taxonomic profiles were determined by pyrosequencing on 16s amplicons of the V3-4 region. Hq quarters showed a higher diversity compared to Mq ones (Shannon index: ~8 and 6, respectively. Clustering of the quarters based on their bacterial composition made it possible to separate Mq and Hq quarters into two separate clusters (C1 and C2, respectively. Discriminant analysis of taxonomic profiles between these clusters revealed several differences and allowed the identification of taxonomic markers in relation to mastitis history. C2 quarters were associated with a higher proportion of the Clostridia class (including genera such as Ruminococcus, Oscillospira, Roseburia, Dorea, etc., the Bacteroidetes phylum (Prevotella, Bacteroides, Paludibacter, etc., and the Bifidobacteriales order (Bifidobacterium, whereas C1 quarters showed a higher proportion of the Bacilli class (Staphylococcus and Chlamydiia class. These results indicate that microbiota is altered in udders which have already developed mastitis, even far from the

  6. Characterization of coagulase-negative staphylococcus species from cows' milk and environment based on bap, icaA, and mecA genes and phenotypic susceptibility to antimicrobials and teat dips.

    Science.gov (United States)

    Piessens, V; De Vliegher, S; Verbist, B; Braem, G; Van Nuffel, A; De Vuyst, L; Heyndrickx, M; Van Coillie, E

    2012-12-01

    The aim of this study was to investigate whether the main coagulase-negative staphylococci (CNS) species involved in bovine intramammary infections (IMI) possess specific characteristics that promote colonization of the udder. Virulence markers associated with biofilm formation, antimicrobial resistance, and biocide tolerance were compared between typically contagious CNS species (Staphylococcus chromogenes, Staphylococcus epidermidis, Staphylococcus haemolyticus, and Staphylococcus simulans) and those rarely causing IMI (Staphylococcus sciuri, Staphylococcus equorum, and others) to find possible associations with pathogenicity. Coagulase-negative staphylococci isolates (n=366) belonging to 22 different species were analyzed by PCR for the presence of the biofilm-associated genes bap and icaA, and the methicillin resistance gene mecA. A selection of 82 isolates was additionally tested for their susceptibility to 5 antibiotics and 2 commercial teat dip products. Minimum inhibitory concentrations of antimicrobials were determined by Etest (AB bioMérieux, Marcy l'Etoile, France), and a microdilution method was optimized to determine minimum biocidal concentrations of teat dips. The bap, icaA, and mecA genes were detected significantly more in isolates from CNS species typically living in the cows' environment than in isolates from IMI-causing species. Antimicrobial resistance was mainly against erythromycin (23%) or oxacillin (16%), and was detected more often in the environmental species. The isolates least susceptible to the teat dips belonged to the IMI-causing species Staph. chromogenes and Staph. simulans. We concluded that carriage of biofilm genes and antimicrobial resistance were not associated with the ability to colonize the mammary gland because free-living CNS species constituted a more significant reservoir of biofilm and resistance determinants than did IMI-causing species. In contrast, increased tolerance to biocides may favor the establishment of

  7. Effects of antibiotic dry-cow therapy and internal teat sealant on milk somatic cell counts and clinical and subclinical mastitis in early lactation.

    Science.gov (United States)

    Golder, H M; Hodge, A; Lean, I J

    2016-09-01

    The objective of this study was to determine the efficacy of an internal teat sealant (TS; Teatseal; Zoetis Australia, Silverwater, NSW, Australia), when used in combination with antibiotic dry-cow therapy (ADCT) administered at dry-off, on milk individual somatic cell count (ISCC), milk production and components, and the incidence of clinical and subclinical mastitis in dairy cows up to 60 d after calving, when compared with ADCT only. Multiparous Holstein, Jersey, or Holstein cross cows (n=2,200) from 8 farms in southern and eastern Australia were randomly assigned to treatment of all 4 quarters with ADCT alone or with ADCT plus TS (ADCT + TS) at dry-off in this randomized, multisite clinical trial. Individual milk yield, fat and protein percentages, and ISCC were measured at intervals of 14±3 d after calving for the first 60 d of lactation. The first measurement occurred between 10 and 24 d after calving. Clinical mastitis and health events were recorded from dry-off to 60 d of lactation. Milk samples were collected from first cases of clinical mastitis and subjected to bacteriology. Treatment and the interaction of treatment by time did not affect milk yield, ISCC weighted by milk yield, or fat and protein percentages. Treatment with ADCT + TS decreased geometric mean ISCC compared with treatment with ADCT alone over the first 60 d of lactation. Geometric mean ISCC (×10(3) cells/mL) was 32.0 [95% confidence interval (CI): 26.8 to 38.3] and 43.5 (95% CI: 36.2 to 52.1) for ADCT + TS and ADCT alone, respectively. The odds of at least 1 case of subclinical mastitis (ISCC ≥250,000 cells/mL) were 1.9 times higher (95% CI: 1.4 to 2.6) with ADCT alone in the first 60 d of lactation compared with ADCT + TS. Use of ADCT + TS reduced the estimated incidence of at least 1 case of subclinical mastitis on all 8 farms, compared with use of ADCT alone. Only 4 cows that calved 40 to 100 d after dry-off had a first case of clinical mastitis in the dry period. Five percent of

  8. The use of an internal teat sealant in combination with cloxacillin dry cow therapy for the prevention of clinical and subclinical mastitis in seasonal calving dairy cows.

    Science.gov (United States)

    Runciman, D J; Malmo, J; Deighton, M

    2010-10-01

    Cows (n=2,053) from 6 seasonally calving dairy herds were enrolled in a trial to compare the efficacy of 2 dry cow treatments. Cows received either a combination dry cow therapy of 600 mg of cloxacillin (CL) followed by an internal teat sealant (ITS) containing 2.6 g of bismuth subnitrate in all 4 quarters immediately following their final milking for the season, or only an intramammary infusion of 600 mg of CL. All cases of clinical mastitis were recorded and cultured during the first 150 d of lactation in each herd, and cow somatic cell count (SCC) was measured between 7 and 50 d postcalving. A large difference was found between treatment groups in the rate at which cows were diagnosed with clinical mastitis over the first 21 d of lactation, after which time the rate at which cows were diagnosed with clinical mastitis was similar between treatment groups. Analysis of the relative proportions of cows with clinical mastitis was performed at both the gland and cow levels. The relative risk (RR) of clinical mastitis diagnosed within 21, 30, and 100 d of calving in a gland treated with the ITS-CL combination was, respectively, 0.30 [95% confidence interval (CI)=0.21-0.44], 0.39 (0.28-0.53), and 0.58 (0.46-0.75) that of the CL group. An interaction between treatment and previous SCC was found when clinical mastitis was analyzed at the cow level. In a subset of cows that had low SCC in their previous lactation, the RR of mastitis in cows with the ITS-CL combination within 21, 30, and 100 d of calving was, respectively, 0.54 (95% CI=0.33-0.87), 0.57 (0.37-0.88), and 0.69 (0.50-0.99) that of cows that received only CL at drying off. In the subset of cows that had at least 1 high SCC in the previous lactation, the RR of mastitis in the ITS-CL combination group within 21, 30, and 100 d of calving was, respectively, 0.26 (95% CI=0.16-0.44), 0.37 (0.24-0.57), and 0.72 (0.55-0.96) that of the CL-only group. The ITS-CL combination of dry cow treatments was associated with a

  9. Personnel Preparation.

    Science.gov (United States)

    Fair, George, Ed.; Stodden, Robert, Ed.

    1981-01-01

    Three articles comprise a section on personnel preparation in vocational education. Articles deal with two inservice programs in career/vocational education for the handicapped and a project to train paraprofessionals to assist special educators in vocational education. (CL)

  10. Solution preparation

    International Nuclear Information System (INIS)

    Seitz, M.G.

    1982-01-01

    Reviewed in this statement are methods of preparing solutions to be used in laboratory experiments to examine technical issues related to the safe disposal of nuclear waste from power generation. Each approach currently used to prepare solutions has advantages and any one approach may be preferred over the others in particular situations, depending upon the goals of the experimental program. These advantages are highlighted herein for three approaches to solution preparation that are currently used most in studies of nuclear waste disposal. Discussion of the disadvantages of each approach is presented to help a user select a preparation method for his particular studies. Also presented in this statement are general observations regarding solution preparation. These observations are used as examples of the types of concerns that need to be addressed regarding solution preparation. As shown by these examples, prior to experimentation or chemical analyses, laboratory techniques based on scientific knowledge of solutions can be applied to solutions, often resulting in great improvement in the usefulness of results

  11. Process for teating whey by enzymic hydrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Nocquet, J L

    1980-01-01

    In the process lactose is converted into glucose and galactose, with demineralization to a level of at least 50%, before the hydrolysis. A bacteriologically stable hydrolysed whey is obtained and may be used in foods for human consumption.

  12. Sample preparation

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Sample preparation prior to HPLC analysis is certainly one of the most important steps to consider in trace or ultratrace analysis. For many years scientists have tried to simplify the sample preparation process. It is rarely possible to inject a neat liquid sample or a sample where preparation may not be any more complex than dissolution of the sample in a given solvent. The last process alone can remove insoluble materials, which is especially helpful with the samples in complex matrices if other interactions do not affect extraction. Here, it is very likely a large number of components will not dissolve and are, therefore, eliminated by a simple filtration process. In most cases, the process of sample preparation is not as simple as dissolution of the component interest. At times, enrichment is necessary, that is, the component of interest is present in very large volume or mass of material. It needs to be concentrated in some manner so a small volume of the concentrated or enriched sample can be injected into HPLC. 88 refs

  13. Radioprotective preparation

    International Nuclear Information System (INIS)

    Stefanova, D.; Frattadochi, A.; Gattavecchia, E.; Ferri, E.; Tonnelli, D.

    1988-01-01

    The invention is intended for radiation injuries prophylaxis in mammals. It has an well expressed radioprotective effect against acute gamma irradiation on cellular level as well as a prolonged action when applied up to 48 hours before the acute irradiation. The preparation is a coprecipitate of the natural tripeptide glutathione (reduced form) and polyvinyl pyrrolidone (pvp) in ratio 30-60/70-40. It is obtained by incubation method with subsequent lyophilization from water solution of the initial components. The molecular mass of the pvp is 20 till 360.10 3 . 2 claims

  14. Target preparation

    International Nuclear Information System (INIS)

    Hinn, G.M.

    1984-01-01

    A few of the more interesting of the 210 targets prepared in the Laboratory last year are listed. In addition the author continues to use powdered silver mixed with /sup 9,10/BeO to produce sources for accelerator radio dating of Alaskan and South Polar snow. Currently, he is trying to increase production by multiple sample processing. Also the author routinely makes 3 μg/cm 2 cracked slacked carbon stripper foils and is continuing research with some degree of success in making enriched 28 Si targets starting with the oxide

  15. ATP bioluminescence: Surface hygiene monitoring in milk preparation room of neonatal intensive care unit

    Science.gov (United States)

    Mohamad, Mahirah; Ishak, Shareena; Jaafar, Rohana; Sani, Norrakiah Abdullah

    2018-04-01

    ATP Bioluminescence application and standard microbiological analyses were used to evaluate the cleanliness of milk contact surfaces and non-milk contact surfaces in milk preparation room of neonatal intensive care unit (NICU) of Universiti Kebangsaan Malaysia Medical Centre (UKMMC). A total of 44 samples including the breast pump, milk bottle, milk bottle screw top and screw ring, teats, measuring cups, waterless warmer, refrigerator, dishwasher and pasteurizer inner wall were tested on May 2017. 3M Clean and Trace Hygiene Monitoring (UXL100 ATP Test swabs) and the bioluminescence reader Clean-Trace NG Luminometer (3M) were used to measure the Relative Light Unit (RLU) and microbiological analysis using 3M Quick Swab and 3MTM PetrifilmTM for enumeration of aerobic count, Staphylococcus aureus, Enterobacteriaceae, coliform and detection of Escherichia coli (CFU /100cm2 or utensil/item). The RLU values were from 11 to 194 and passed the ATP benchmark for intensive care unit (ICU), < 250 RLU as recommended. Aerobic colony count was only found in waterless warmer (0.05±0.01 mean log CFU/warmer). None of S. aureus, Enterobacteriaceae, E. coli and coliform was detected in all samples. A weak correlation was found between bioluminescence measurements RLU and the microbiological analysis (CFU). However, the use of ATP bioluminescence in monitoring milk preparation room cleanliness can be a useful method for assessing rapidly the surface hygiene as well as to verify the Sanitation Standard Operating Procedure (SSOP) prior to implementation of Hazard Analysis and Critical Control Points (HACCP) in milk preparation room.

  16. Preparing for Surgery

    Science.gov (United States)

    ... Events Advocacy For Patients About ACOG Preparing for Surgery Home For Patients Search FAQs Preparing for Surgery ... Surgery FAQ080, August 2011 PDF Format Preparing for Surgery Gynecologic Problems What is the difference between outpatient ...

  17. Materials Preparation Center

    Data.gov (United States)

    Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

  18. Documents preparation and review

    International Nuclear Information System (INIS)

    1999-01-01

    Ignalina Safety Analysis Group takes active role in assisting regulatory body VATESI to prepare various regulatory documents and reviewing safety reports and other documentation presented by Ignalina NPP in the process of licensing of unit 1. The list of main documents prepared and reviewed is presented

  19. PREPARATIVE SKIN PREPARATION AND SURGICAL WOUND INFECTION

    Directory of Open Access Journals (Sweden)

    Anjanappa

    2015-01-01

    Full Text Available BACKGROUND AND OBJECTIVE: It is an established fact now that the normal skin of healthy human beings harbours a rich bacterial fl ora. Normally considered non - pathogenic , these organisms way be a potential source of infection of the surgical wound. Approximately 20% of the resident flora is beyond the reach of surgical scrubs and antiseptics. The goal of surgical preparation of the skin with antiseptics is to remove transient and pathogenic microorganisms on the skin surface and to reduce the resident flora to a low level. Povidone iodine (I odophors and chlorhexidine are most often used antiseptics for pre - operative skin preparation. OBJECTIVES : To evaluate the efficacy of povidone iodine alone and in combination with antiseptic agent containing alcoholic chlorhexidine in preoperative skin p reparation by taking swab culture. (2 To compare the rate of postoperative wound infection in both the groups. METHODS: One hundred patients (fifty in each group undergoing clean elective surgery with no focus of infection on the body were included in th e study. The pre - operative skin preparation in each group is done with the respective antiseptic regimen. In both the groups after application of antiseptics , sterile saline swab culture was taken immediately from site of incision. In cases which showed gr owth of organisms , the bacteria isolated were identified by their morphological and cultural characteristics. Grams staining , coagulase test and antibiotic sensitivity test were done wherever necessary and difference in colonization rates was determined as a measure of efficacy of antiseptic regimen. RESULTS: The results of the study showed that when compared to povidone iodine alone , using a combination of povidone iodine and alcoholic solution of chlorhexidine , the colonization rates of the site of incisi on were reduced significantly. As for the rate of post - operative wound infection , it is also proven that wound infections are also

  20. Preparation of bromine fluoride

    International Nuclear Information System (INIS)

    Domange, Pr; Duflo, J.

    1958-05-01

    This note addresses the preparation of bromine fluoride. It indicates the implemented process for the reaction, used products (fluorine and bromine), and column characteristics. It describes the operating mode. Apparatus drawing is provided

  1. Dukovany ASSET mission preparation

    Energy Technology Data Exchange (ETDEWEB)

    Kouklik, I [NPP Dukovany (Czech Republic)

    1997-12-31

    We are in the final stages of the Dukovany ASSET mission 1996 preparation. I would like to present some of our recent experiences. Maybe they would be helpful to other plants, that host ASSET missions in future.

  2. Sperm preparation for fertilization

    NARCIS (Netherlands)

    Gadella, B.M.

    2014-01-01

    Description This book contains 19 chapters that discuss theoretical and applied andrology for domestic, zoo and wild animals. Topics include semen and its constituents; sperm production and harvest; determinants of sperm morphology; sperm preparation for fertilization; practical aspects of semen

  3. Dukovany ASSET mission preparation

    International Nuclear Information System (INIS)

    Kouklik, I.

    1996-01-01

    We are in the final stages of the Dukovany ASSET mission 1996 preparation. I would like to present some of our recent experiences. Maybe they would be helpful to other plants, that host ASSET missions in future

  4. FERMILAB: Preparing to collide

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Against the background of stringent Environment, Safety and Health (ES&H) regulations mandated by the US Department of Energy for all national Labs, Fermilab prepared to mount the next major Tevatron proton-antiproton collider run

  5. The hospital preparation of radiopharmaceuticals

    International Nuclear Information System (INIS)

    The subject is covered in sections: introduction; preparation ((general - sterilization), production areas (laboratories), working methods for injections, working methods for oral preparations and iodination procedures); analytical testing (general, standards common to injections and oral preparations, standards for injections, standards for oral preparations); reliable methods of preparing sup(99m)Tc-radiopharmaceuticals and 51 Cr-red cells; commercial radiopharmaceutical kits. (U.K.)

  6. Preparation of alumina microspheres

    International Nuclear Information System (INIS)

    Santos, W.R. dos; Abrao, A.

    1980-01-01

    Inorganic exchangers are widely used for adsorption and column partition chromatography. The main difficulty of using commercial alumina (in powder) for column chromatography is related to its packing, and the operations through the column become diffcult and time-consuming; also it turns to be virtually impossible to use large dimension columns. In order to eliminate these problems, a process for the preparation of alumina micro-spheres was developed as an adaptation of a similar process used to prepare nuclear fuel microspheres (UO 2 , ThO 2 ). The flowsheet of this process is presented together with the analytical results of sphericity after calcination, granulometry, density and characterization by X-ray diffractometry. Solubility tests showed that the so-prepared microspheres are well resistant to strong acids and bases; retention tests showed their efficiency, mainly to copper. (C.L.B.) [pt

  7. Surface preparation of niobium

    International Nuclear Information System (INIS)

    Kneisel, P.

    1980-01-01

    Any discussion of surface preparation for superconducting rf-surfaces is certainly connected with the question what is the best recipe for achieving high Q-values and high break-down fields. Since the break-down in a cavity is not understood so far and because several mechanisms play a role, it also is not possible to give one recipe which always works. Nevertheless in the past certain preparation techniques for niobium surfaces have been developed and certain rules for preparation can be applied. In the following the to-days state of the art will be described and it is attempted to give a short description of the surface in conjunction with the methods of surface treatments, which generally can be applied to niobium cavities. (orig./WTR)

  8. Preparation of shaped bodies

    International Nuclear Information System (INIS)

    Sutcliffe, P.W.; Isaacs, J.W.; Lyon, C.E.

    1979-01-01

    A method for the preparation of a shaped body includes pressing a powder to give a 'green' shaped body, the powder having been made by comminuting a material prepared by means of a gelation process, the material prior to comminuting being of a selected physical configuration (e.g. spherical). Thus, a material prepared by means of a gelation process can be transported and handled in an environmentally desirable, substantially dust-free form (e.g. spherical particles) and then comminuted to produce a powder for pressing into e.g. a shaped nuclear fuel body (e.g. pellets of (70%U/30%Pu)O 2 ), which can be sintered. (author)

  9. Preparation of hydraulic cement

    Energy Technology Data Exchange (ETDEWEB)

    1921-08-28

    A process for the preparation of hydraulic cement by the use of oil-shale residues is characterized in that the oil-shale refuse is mixed with granular basic blast-furnace slag and a small amount of portland cement and ground together.

  10. Preparation of uranium nitride

    International Nuclear Information System (INIS)

    Potter, R.A.; Tennery, V.J.

    1976-01-01

    A process is described for preparing actinide-nitrides from massive actinide metal which is suitable for sintering into low density fuel shapes by partially hydriding the massive metal and simultaneously dehydriding and nitriding the dehydrided portion. The process is repeated until all of the massive metal is converted to a nitride

  11. Preparation of 1-bromoheptacosane

    International Nuclear Information System (INIS)

    Hernandez, L.; Hernandez, A.; Gonzalez, J.C.

    1996-01-01

    Alkybromides are ones of the main organic precursors for fatty acids and alcohols labelling with Carbon 1-14. In this work the preparation of 1-bromoheptacosane by bromodescarboxylation of 1-octacosanoic acid is described. The synthesis yielded 80.5% of final product and more than 97% of chemical purity. Clean-up procedure modifications and spectral data bromoheptacosane are also reported

  12. Preparing for CLIC tests

    CERN Multimedia

    Laurent Guiraud

    1999-01-01

    The Canon 5 undergoes first brazing for preparation in the CLIC study at the CLIC Test Facility 2 (CTF2). This will test injection for a proposed linear collider that will further explore discoveries made at the LHC. Electric fields in the canon will boost electrons into the acceleration fields of the collider.

  13. Preparation of beryllium hydride

    International Nuclear Information System (INIS)

    Roberts, C.B.

    1975-01-01

    A process is described for preparing beryllium hydride by the direct reaction of beryllium borohydride and aluminum hydride trimethylamine adduct. Volatile by-products and unreacted reactants are readily removed from the product mass by sublimation and/or evaporation. (U.S.)

  14. Process for preparing radiopharmaceuticals

    International Nuclear Information System (INIS)

    Barak, M.; Winchell, H.S.

    1977-01-01

    A process for the preparation of technetium-99m labeled pharmaceuticals is disclosed. The process comprises initially isolating technetium-99m pertechnetate by adsorption upon an adsorbent packing in a chromatographic column. The technetium-99m is then eluted from the packing with a biological compound to form a radiopharmaceutical

  15. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned and the limited capacity of the main auditorium, you are requested to register in advance via ...

  16. Porous electrode preparation method

    Science.gov (United States)

    Arons, R.M.; Dusek, J.T.

    1983-10-18

    A porous sintered plaque is provided with a bimodal porosity that is especially well suited for use as an electrode within a molten carbonate fuel cell. The coarse porosity is sufficient for admitting gases into contact with the reaction surfaces while the fine porosity is wetted with and retains molten electrolyte on the reaction sites. The electrode structure is prepared by providing a very fine powder of such as nickel oxide and blending the powder with a suitable decomposable binder to form a solid mass. The mass is comminuted into agglomerate size particles substantially larger than the fine oxide particles and formed into a cohesive compact for subsequent sintering. Sintering is carried out at sufficient conditions to bind the agglomerates together into a porous structure having both coarse and fine porosity. Where lithiated nickel oxide cathodes are prepared, the sintering conditions can be moderate enough to retain substantial quantities of lithium within the electrode for adequate conductivity. 2 figs.

  17. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place in the afternoons of 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance via Ind...

  18. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance ...

  19. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register ...

  20. Preparation to exceptional operations

    International Nuclear Information System (INIS)

    Sort, M.

    1984-01-01

    Preparation to special maintenance operations requires a specific approach according to the considered intervention type. Replacement of vapor generators is representative of a kind of intervention where technics is generally only an adaptation to the power plant context of processes already in application in construction, and where methodology, planning and organization have an important role because of the variety and the quantity of taskworks to be done, the involved manpower, the dosimetry and time lag requirements [fr

  1. Preparative radiation chemistry

    International Nuclear Information System (INIS)

    Drawe, H.

    1978-01-01

    Preparative synthesis of compounds with the aid of radiation chemistry is increasingly used in laboratories as well as on a technical scale. A large number of new compounds has been produced with the methods of radiation chemistry. With the increasing number of available radiation sources, also the number of synthesis metods in radiation chemistry has increased. This paper can only briefly mention the many possible ways of synthesis in radiation chemistry. (orig./HK) [de

  2. Overview of Site Preparation

    International Nuclear Information System (INIS)

    Garin, P.

    2006-01-01

    The preparation of Cadarache as the host of ITER is organised at a double level: Europe, since the beginning of the candidature in 2001, is coordinating the so-called European ITER Site Studies; France, as the host country, has put in place a dedicated structure at a decisional level (close to the government), and operational level in the PACA region with two entities: The Agency Iter France (AIF), inside the CEA, interlocutor of international and European entities, in charge of site preparation and fund recollection; An accompanying prefectoral mission, in charge mainly of road adaptation and the international school. The paper will cover all the aspects related to the preparation of the implementation of ITER: Technical aspects: the progress of site preparation itself, its servicing (water supply, electrical supply, Internet...), the road adaptation between the large harbour of Fos-sur-mer and Cadarache, etc. will be detailed. Regulatory procedures: in the framework of the delegation that the ITER partners gave to the CEA/AIF on 14 th September 2005, two main large files are in progress: The public debate, organised by an independent authority, informs the population of the challenges and impacts of ITER in Provence; The safety documents: the writing of the preliminary safety report, which will be submitted to the Nuclear Safety Authority and the files submitted to the public during the public enquiries are ongoing. Socioeconomic aspects: the welcome of ITER staff and their families is operational, via a dedicated Welcome Office; the location of an international school in Manosque leads now to its pre-figuration. The overall organisation will be described, as well as all planning forecast for the coming years, leading to the start of construction. (author)

  3. Preparing for evil.

    Science.gov (United States)

    Mitroff, Ian I; Alpaslan, Murat C

    2003-04-01

    How can you plan for every crisis that might occur, even for ones you can't imagine? The task seems so daunting and so limitless that many firms don't even start. In fact, as the authors' 20 years of research shows, three out of four Fortune 500 companies are prepared to handle only the types of calamities they've already suffered, and not even all of those. That's unfortunate because the research also shows that crisis-prepared companies fare better financially, have stronger reputations, and ultimately stay in business longer than their crisis prone counterparts. Crisis-prepared companies use a systematic approach to focus their efforts. In addition to planning for natural disasters, they divide man-made calamities into two sorts--accidental or "normal" ones, like the Exxon Valdez oil spill, and deliberate or "abnormal" ones, like product tampering. Then they take steps to broaden their thinking about such potential crises. They consider threats that would be common in other industries, for instance. And they seek input from outsiders such as investigative journalists and even reformed criminals. But if these companies think broadly about possible threats, they think narrowly about implementation. Each year, smart companies focus their resources and attention on a few facilities picked at random, just as airlines conduct detailed security checks on just a few passengers for each flight. That reduces the probability of an attack on the entire organization even as it allows the business to migrate steadily to a higher level of crisis readiness. Crisis-prepared companies know that disasters cannot be managed through cost-benefit analyses. It is precisely because the effects of a disaster cannot be predicted or controlled that smart companies focus their efforts on preventing crises rather than containing them after the fact.

  4. The Preparation of Graphene

    Institute of Scientific and Technical Information of China (English)

    Chen Yanyan

    2015-01-01

    Graphene has unique structure and possesses excellent physical and chemical properties, and it has received a great deal of attention in related research fields. The quality, quantity and application of graphene are related to its preparation methods. At present the bottleneck of graphene research is that both high-quality and large quantity of graphene could not be obtained simultaneously and the reason is that the basic mechanism of graphene formation has mot been wel understood.

  5. PREPARING A MARKETING STRATEGY

    OpenAIRE

    Grönholm, Eija

    2010-01-01

    The objective of this thesis was to prepare a marketing strategy for Living City Centre of Kotka Association. The work was implemented with the members of the association and the executive director Reijo Saksa. Living City Centre of Kotka Association was founded in spring 2006 for promoting living, enjoyable and safe centers in the City of Kotka. The association has two permanent employees. The main duties are managing the Kotka market places and promoting the stakeholder connections betw...

  6. Preparation of beryllium hydride

    International Nuclear Information System (INIS)

    Bergeron, C.R.; Baker, R.W.

    1975-01-01

    Beryllium hydride of high bulk density, suitable for use as a component of high-energy fuels, is prepared by the pyrolysis, in solution in an inert solvent, of a ditertiary-alkyl beryllium. An agitator introduces mechanical energy into the reaction system, during the pyrolysis, at the rate of 0.002 to 0.30 horsepower per gallon of reaction mixture. (U.S.)

  7. Preparing for Emergency Situations

    Science.gov (United States)

    Asproth, Viveca; Amcoff Nyström, Christina

    2010-11-01

    Disaster relief can be seen as a dynamic multi actor process with actors both joining and leaving the relief work during the help and rescue phase after the disaster has occurred. Actors may be governmental agencies, non profit voluntary organisations or spontaneous helpers comprised of individual citizens or temporal groups of citizens. Hence, they will vary widely in agility, competence, resources, and endurance. To prepare for for disasters a net based Agora with simulation of emergency situations for mutual preparation, training, and organisational learning is suggested. Such an Agora will ensure future security by: -Rising awareness and preparedness of potential disaster responders by help of the components and resources in the netAgora environment; -Improving cooperation and coordination between responders; -Improving competence and performance of organisations involved in security issues; -Bridging cultural differences between responders from different organizations and different backgrounds. The developed models are intended to reflect intelligent anticipatory systems for human operator anticipation of future consequences. As a way to catch what should be included in this netbased Agora and to join the split pictures that is present, Team Syntegrity could be a helpful tool. The purpose of Team Syntegrity is to stimulate collaboration and incite cross fertilization and creativity. The difference between syntegration and other group work is that the participants are evenly and uniquely distributed and will collectively have the means, the knowledge, the experience, the perspectives, and the expertise, to deal with the topic. In this paper the possibilities with using Team Syntegrity in preparation for the development of a netbased Agora is discussed. We have identified that Team Syntegrity could be useful in the steps User Integration, Designing the netAgora environment, developing Test Scenarios, and assessment of netAgora environment.

  8. Preparation of beryllium hydride

    International Nuclear Information System (INIS)

    Lowrance, B.R.

    1975-01-01

    A process is described for the preparation of beryllium hydride which comprises pyrolyzing, while in solution in a solvent inert under the reaction conditions, with respect to reactants and products and at a temperature in the range of about 100 0 to about 200 0 C, sufficient to result in the formation of beryllium hydride, a di-t-alkyl beryllium etherate wherein each tertiary alkyl radical contains from 4 to 20 carbon atoms. The pyrolysis is carried out under an atmosphere inert under the reaction conditions, with respect to reactants and products. (U.S.)

  9. Potassium fluorotitanate preparation

    International Nuclear Information System (INIS)

    Perillo, Patricia; Ares, Osvaldo; Botbol, Jose.

    1989-01-01

    In order to determine the best conditions for potassium fluotitanate preparation as intermediate step in the electrolytic production of metalic titanium, the effects of a number of experimental variables have been studied. This method is a process of sintering titanium dioxide with potassium fluosilicate and potassium chloride, followed by leaching with boiling water and further crystallization by cooling the solution. An overall yield of 90% has been attained under the following conditions: working temperature: 750 deg C; heating time for sintering: 3 hours; molar ratio: titanium dioxide: potassium fluosilicate: potassium chloride: 1 : 2 : 0.4; number of leachings: 6. (Author) [es

  10. Physiologic effects of bowel preparation

    DEFF Research Database (Denmark)

    Holte, Kathrine; Nielsen, Kristine Grubbe; Madsen, Jan Lysgård

    2004-01-01

    healthy volunteers (median age, 63 years) underwent bowel preparation with bisacodyl and sodium phosphate. Fluid and food intake were standardized according to weight, providing adequate calorie and oral fluid intake. Before and after bowel preparation, weight, exercise capacity, orthostatic tolerance...

  11. Data Breach Preparation

    Energy Technology Data Exchange (ETDEWEB)

    Belangia, David Warren [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-03-13

    The Home Depot Data Breach is the second largest data breach on record. It has or will affect up to 56 million debit or credit cards. A trusted vendor account, coupled with the use of a previously unknown variant of malware that allowed the establishment of a foothold, was the entry point into the Home Depot network. Once inside the perimeter, privilege escalation provided an avenue to obtain the desired information. Home Depot did, however, learn some lessons from Target. Home Depot certainly communicated better than Target, procured insurance, and instituted as secure an environment as possible. There are specific measures an institution should undertake to prepare for a data breach, and everyone can learn from this breach. Publicly available information about the Home Depot Data Breach provides insight into the attack, an old malware variant with a new twist.While the malware was modified as to be unrecognizable with tools, it probably should have been detected. There are also concerns with Home Depot’s insurance and the insurance provider’s apparent lack of fully reimbursing Home Depot for their losses. The effect on shareholders and Home Depot’s stock price was short lived. This story is still evolving but provides interesting lessons learned concerning how an organization should prepare for it inevitable breach.

  12. PREPARATION FOR RETIREMENT PROGRAMME

    CERN Multimedia

    Human Resources Division

    2001-01-01

    27 March 2001 from 2.00 p.m. to 5.30 p.m. 28 March 2001 from 2.00 p.m. to 5.30 p.m. 29 March 2001 from 2.00 p.m. to 5.30 p.m. 30 March 2001 from 2.00 p.m. to 4.45 p.m. Auditorium (Main Building) After the success of the preparation seminars held in recent years, it has been decided that the programme should continue. The forthcoming seminar has been prepared in close collaboration with the CERN Pensioners' Association. The programme will be organised over several half-day sessions. Once again this year, a special session will be devoted to the 10th revision of the Swiss state pension scheme, the 'AVS' (Assurance-Vieillesse et Survivants), and the consequences for international civil servants. A talk will be given by Mrs Danièle Siebold, Director of the Caisse Cantonale Genevoise de Compensation, aimed mainly at those residing in or intending to move to Switzerland, or who worked in Switzerland before joining CERN. To enable Mrs Siebold to respond to your concerns as effectively as possible, please ...

  13. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2007-01-01

    The Department of Human Resources is organising a preparation for retirement seminar which will take place on the four successive afternoons of 2 to 5 October 2007. Similar seminars in the past have always proved highly successful. Retirement marks the end of one’s working life and the start of a new period of life. This period of transition and change is experienced differently from one individual to another. In any case, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above as well as those who have retired during the year have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned and the limited capacity of th...

  14. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2011-01-01

    The Human Resources Department is organizing a Preparation for Retirement Seminar, which will take place on 18 and 21 October 2011 in the afternoon in the Main Auditorium and on 19 October and 15 and 16 November 2011 in the afternoon in the Council Chamber. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned, you are ...

  15. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2011-01-01

    The Human Resources Department is organizing a Preparation for Retirement Seminar, which will take place on 18 and 21 October 2011 in the afternoon in the Main Auditorium and on 19 October and 15 and 16 November 2011 in the afternoon in the Council Chamber. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned, you are r...

  16. Preparing Students for Globalization

    DEFF Research Database (Denmark)

    Friesel, Anna

    2010-01-01

    A. Friesel. Preparing Students for Globalization Working with International Teams with Projects // Electronics and Electrical Engineering. - Kaunas: Technologija, 2019. - No. 6(102). - P. 111-114. This paper summarizes the activities, contents and overall outcomes of our experiences with internat......A. Friesel. Preparing Students for Globalization Working with International Teams with Projects // Electronics and Electrical Engineering. - Kaunas: Technologija, 2019. - No. 6(102). - P. 111-114. This paper summarizes the activities, contents and overall outcomes of our experiences...... the positive influence on number of our partnership agreements with other European universities. Globalisation makes it necessary to cooperate on an international platform. At the IHK we have more than 50 active Erasmus agreements. We also have bilateral agreements with many non-European countries, for example......: USA, China, Korea, Mexico, Chile and others. We describe our experiences of working on industrial projects with international teams and analyse the development and trends in student mobility. The growing popularity of these programmes and the increasing number of the students joining our international...

  17. Integrated coal preparation

    International Nuclear Information System (INIS)

    Buchanan, D.J.; Jones, T.F.

    1992-01-01

    Perceptions of quality have changed over the years. The attributes of a certain coal (its rank, slagging propensity, ash content etc) are traditionally referred to as its quality. However, the subject of this paper is quality in a much wider sense: quality as fitness for purpose: and all that such a wide definition entails. British Standard BS 5750 (ISO 9000) Quality Systems defines a systems approach to quality, and includes both the supplier of raw materials and the final customer within this boundary. Coal preparation starts at the production face. The greater the proportion of dirt in run-of-mine product the greater the challenge in satisfying the customer's needs. Significant advances have been made in minimizing mined dirt. For example, the sue of vertical steering on longwall faces improves productivity and quality. Unfortunately modern mining methods produce large quantities of fines, despite efforts to reduce them at the point of production and during transportation to the surface. Coal preparation also produces further fines. It has been estimated that fine coal costs 2.5 times as much to clean as large coal, and the costs of handing wet fine coal product will inflate this estimate. Handling considerations rightly concern our customers and are part of the wider meaning of quality. In this paper the authors address some novel solutions to the challenge posed by fines

  18. Preparation for retirement seminar

    CERN Multimedia

    HR Department

      The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance via Indico. &a...

  19. End-preparation assessments and tests for compounded sterile preparations.

    Science.gov (United States)

    McElhiney, Linda F

    2013-01-01

    Outsourcing has become a necessity to obtain sterile products that are currently on backorder. Because of the expense of outsourcing sterile compounding, pharmacy leadership in health systems are now considering the option of insourcing and batch preparing compounded sterile preparations, which can be a viable option for a health system. It can significantly decrease drug-spending costs, and the pharmacy has a complete record of the compounding process. The key to preparing high-quality, safe, sterile preparations and meeting United States Pharmacopeia standards is end-preparation assessments and tests.

  20. Prepare Healthy Foods with Toddlers

    Science.gov (United States)

    Izumi-Taylor, Satomi; Rike, Cheryl

    2011-01-01

    Toddlers--from about 16 to 36 months--can learn a variety of skills as they prepare food and follow recipes in developmentally appropriate ways. Early childhood teachers are encouraged to support young children's healthy eating habits by offering simple food preparation experiences. When toddlers--and preschoolers--safely prepare healthy snacks,…

  1. Preparing for public policy

    Science.gov (United States)

    Plapp, Brendan

    2002-03-01

    In the early 1990s, the tight job market for Ph.D. recipients in physics led to a reexamination of graduate programs by some departments. The speaker participated in this reanalysis at his graduate institution and arranged presentations of alternative careers to the physics graduate student body. What became clear was that diverse options were open; job seekers just needed flexible expectations. However, there are a number of additions or modifications to graduate programs which could further help to prepare Ph.D. recipients as they move into non-traditional roles, such as additional and more formal experience in communicating science to a wide range of audiences. In particular, it would be advantageous to learn how to explain the role that basic scientific research projects play in the larger public policy arena. Examples from the speaker's experience of working as a staff member in the U.S. Congress will be presented to illustrate the skills needed in that environment.

  2. Preparing for faster filling

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Following the programmed technical stop last week, operators focussed on preparing the machine for faster filling, which includes multibunch injection and a faster pre-cycle phase.   The LHC1 screen shot during the first multibunch injection operation. The LHC operational schedule incorporates a technical stop for preventive maintenance roughly every six weeks of stable operation, during which several interventions on the various machines are carried out. Last week these included the replacement of a faulty magnet in the SPS pre-accelerator, which required the subsequent re-setting of the system of particle extraction and transfer to the LHC. At the end of last week, all the machines were handed back for operation and work could start on accommodating all the changes made into the complex systems in order for normal operation to be resumed. These ‘recovery’ operations continued through the weekend and into this week. At the beginning of this week, operators succeeded in pro...

  3. Hospital preparation and drills

    International Nuclear Information System (INIS)

    Marshall, J.C.; Mettler, F.A. Jr.

    1990-01-01

    The authors discuss how effective management of radiation accidents requires a large amount of preparation and thought. In addition, training of the staff is absolutely essential. This is best accomplished through annual drills, but also may be accomplished through the use of videotapes. The critical points to be remembered in the handling of such accidents and in writing the procedures is that treatment of non-radiation-related injuries and medical stabilization are paramount. The second point is that it is important to be able to distinguish between a patient who has been irradiated from an external radiation source and one who is contaminated with radioactive materials. The handling of these two types of accidents is entirely different and this distinction needs to be made early. All of the items outlined in this chapter concern the care of the severely injured and radioactively contaminated

  4. Preparing the operating budget.

    Science.gov (United States)

    Williams, R B

    1983-12-01

    The process of preparing a hospital pharmacy budget is presented. The desired characteristics of a budget and the process by which it is developed and approved are described. Fixed, flexible, and zero-based budget types are explained, as are the major components of a well-developed budget: expense, workload, productivity, revenue, and capital equipment and other expenditures. Specific methods for projecting expenses and revenues, based on historical data, are presented along with a discussion of variables that must be considered in order to achieve an accurate and useful budget. The current shift in emphasis away from revenue capture toward critical analysis of pharmacy costs underscores the importance of budgetary analysis for hospital pharmacy managers.

  5. Preparing paraffin wax, etc

    Energy Technology Data Exchange (ETDEWEB)

    1935-12-27

    A process is described for preparing paraffin wax by separation from substances containing bitumen, consisting of treating the raw material at an elevated temperature under such moderate conditions and by means of such organic solvents that the bitumen present in the raw material or formed in the process dissolves as well as the asphaltic and phenolic substances and the humic acids which may be said to be neither extracts nor decomposed materials, and then submitting the products and extracts to a treatment with hydrogen gas, which is effected below 300/sup 0/C, and passing the material over fixed hydrogenation catalysts above 300/sup 0/C by means of hydrogenation catalysts finely dispersed in carbonaceous materials all avoiding decomposition with the formation of volatile products.

  6. Decommissioning. Success with preparation

    International Nuclear Information System (INIS)

    Klasen, Joerg; Schulz, Rolf; Wilhelm, Oliver

    2017-01-01

    The decommissioning of a nuclear power plant poses a significant challenge for the operating company. The business model is turned upside down and a working culture developed for power operation has to be adapted while necessary know- how for the upcoming tasks has to be built up. The trauma for the employees induced by the final plant shut-down has to be considered and respected. The change of working culture in the enterprise has to be managed and the organization has to be prepared for the future. Here the methods of Change-Management offer a systematic and effective approach. Confidence in the employee's competencies is one of the key success factors for the change into the future.

  7. Herd characteristics and management practices associated with bulk tank milk quality of dairy herds in southeastern Brazil.

    Science.gov (United States)

    Cortinhas, Cristina Simões; Botaro, Bruno Garcia; de Macedo, Susana Nori; Dos Santos, Marcos Veiga

    2018-04-30

    This study identified the association of management practices and herd characteristics with milk quality of bulk tanks in southeastern, Brazil. Milk samples were collected weekly during 8 weeks from 63 dairy herds. Bulk tanks were evaluated for total bacteria (TBC), preliminary incubation (PIC), pasteurization (PC), coliform (CC), and somatic cell counts (SCC). Associations found were type of milking system utilized in the farm with TBC, PIC, and SCC; the use of gloves for milking with TBC and PIC; sanitation of milking equipment prior to milking with PC and CC; strip cup testing of cows with PC; teat washing prior to milking with SCC; pre-milking teat disinfection with TBC and CC; post-dipping with TBC and SCC; and the alkaline-acid washing procedure of milking equipment with PIC and PC. The regression analysis explained the variation of bulk tank PC (- 0.47 log cfu/mL) due to the adoption of strip cup test (P = 0.036) and, by 0.366 log cfu/mL due to alkaline and acid washing of milking equipment (P = 0.036). Herringbone milking systems adopted on farms represented a change of - 0.11 log cfu/mL on the log SCC (P = 0.048). Findings may provide a guideline to prioritize efforts aimed at improving milk quality at the farm level in Brazil.

  8. Prepared for internship?

    LENUS (Irish Health Repository)

    Abuhusain, H

    2009-03-01

    Preparedness of medical school graduates for the intern year is one of the emphasised objectives of undergraduate medical training. We have evaluated the perceived preparedness of graduates undertaking the intern year in the Republic of Ireland. A 9-page questionnaire was mailed to all 497 interns in Ireland following commencement of the intern year in July 2005. Data obtained included demographics, perceived preparedness and assessment of perceived clinical skills (four sub-domains: core competencies, communication, emergencies, and educational environment). Information on intern induction was also collected. 99 questionnaires were returned (19.9%). Most of the cohort were Irish and worked in large medical school teaching hospitals. The majority of interns felt \\'unprepared\\' for the intern year. Interns perceived themselves \\'poor\\' in all areas of clinical skills assessed. Intern induction was attended by the majority and most stated it was too short. Medical schools are actively seeking innovative methods, through early patient contact and sub-internships, to better prepare undergraduates for the intern year. The deficiencies identified in this study are significant and emphasise the need for continued reform in the undergraduate curriculum.

  9. Preparation for retirement seminar

    CERN Multimedia

    HR Department

    2010-01-01

    (Health insurance and wealth and succession planning) During the preparation for retirement seminar in November 2009, the sessions on health insurance in Switzerland and in France unfortunately had to be postponed. Participants in the seminar also expressed interest in an information session on “How to manage your wealth and organize your succession”. The sessions on health insurance will be held on 16 March 2010 and those on managing wealth and succession on 18 March 2010. Programme for Tuesday 16 March 2010 (TH Theory Conference Room, Building 4/3-006): 09:00 Health insurance in Switzerland by Mr. Sandro Breitenstein, Service de l'Assurance Maladie du Canton de Genève 10:00 Coffee break 10:20 Health insurance in France by Mr. Dominique Curtiaud, Caisse Primaire d'Assurance Maladie de l'Ain Programme for Thursday 18 March 2010 (TH Theory Conference Room, Building 4/3-006): 09:00 How to manage your wealth and organize your succession in Switzerland by Mr. Jean-Marc W...

  10. Preparing for the future

    CERN Multimedia

    Panos Charitos

    2016-01-01

    The second annual meeting of the Future Circular Collider (FCC) design study took place from 11 to 15 April in Rome.   The participants in the second annual meeting of the FCC design study. (Photo: Vinicio Tullio/INFN) More than 450 scientists, researchers and leaders of high-tech industry gathered in Rome to review the progress of the Future Circular Collider (FCC) design study. The study was kicked off in 2014 as a response to a statement in the European Strategy for Particle Physics, and today embraces 74 institutes from 26 countries. With the LHC programme well under way, particle physicists are at an exciting juncture. New results from the 13 TeV run could show that we are on the threshold of an eye-opening era that presents new challenges and calls for developments. “To prepare for its future, CERN should continue to develop a vibrant R&D programme that should take advantage of its strengths and uniqueness, pursue design studies for...

  11. Preparing for Failure

    International Nuclear Information System (INIS)

    Murphy, L.T.; Manson, A.W.

    2006-01-01

    Risk management is one of the most complex project management processes, requiring rigorous management and discipline. Unfortunately, for many organizations, the risk management process has become contaminated by poor management practices, an absence of meaningful risk assessments, meaningless risk event descriptions, incomplete and vague risk impact analyses, poor follow through on risk mitigation activities and a general lack of attention to accuracy, completeness and quality. At this point, the risk register, instead of being a key tool used by the organization to systematically identify and eliminate risk, while exploiting opportunities, has become a list of pre-prepared excuses based on the repeat of failures encountered on past projects. However, organizations are not condemned to repeat past failures. By returning to the basics of risk management, and through the application of some basic management guidelines, the risk register-instead of being an 'Excuse Register' - can become the cornerstone of a comprehensive risk management program to promote a systematic, pro-active approach within an organization that will result in accomplishing mitigation activities, reducing risk and gaining advantage through opportunities. (authors)

  12. Bowel preparation for CT colonography

    International Nuclear Information System (INIS)

    Neri, Emanuele; Lefere, Philippe; Gryspeerdt, Stefaan; Bemi, Pietro; Mantarro, Annalisa; Bartolozzi, Carlo

    2013-01-01

    Bowel preparation represents an essential part of CT colonography, as the accuracy of the exam is strongly related to the adequacy of colonic cleansing, and a poor bowel preparation may compromise the diagnostic quality even despite optimization of all other acquisition parameters. Residual stool and fluid in the large bowel may affect the interpretation of the exam and may increase the number of false positives and false negatives. In this regard, the majority of patients having undergone CT colonography state that bowel preparation is the most unpleasant part. Unfortunately, to date no definite consensus has been reached about the ideal bowel preparation technique, and there is great variability in preparation strategies across diagnostic centers. The purpose of this review article is to describe the development and evolution of bowel preparation techniques in order to choose the best approach for optimizing the diagnostic quality of CT colonography in each patient

  13. Bowel preparation for CT colonography

    Energy Technology Data Exchange (ETDEWEB)

    Neri, Emanuele, E-mail: emanuele.neri@med.unipi.it [Diagnostic and Interventional Radiology, University of Pisa (Italy); Lefere, Philippe; Gryspeerdt, Stefaan [Department of Radiology, Stedelijk Ziekenhuis, Roeselare (Belgium); Bemi, Pietro; Mantarro, Annalisa; Bartolozzi, Carlo [Diagnostic and Interventional Radiology, University of Pisa (Italy)

    2013-08-15

    Bowel preparation represents an essential part of CT colonography, as the accuracy of the exam is strongly related to the adequacy of colonic cleansing, and a poor bowel preparation may compromise the diagnostic quality even despite optimization of all other acquisition parameters. Residual stool and fluid in the large bowel may affect the interpretation of the exam and may increase the number of false positives and false negatives. In this regard, the majority of patients having undergone CT colonography state that bowel preparation is the most unpleasant part. Unfortunately, to date no definite consensus has been reached about the ideal bowel preparation technique, and there is great variability in preparation strategies across diagnostic centers. The purpose of this review article is to describe the development and evolution of bowel preparation techniques in order to choose the best approach for optimizing the diagnostic quality of CT colonography in each patient.

  14. LHC preparations change gear

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    After the formal approval by CERN Council in December (January, page 1) of the LHC protonproton collider for CERN's 27- kilometre LEP tunnel, preparations for the new machine change gear. Lyndon Evans becomes LHC Project Leader, and CERN's internal structure will soon be reorganized to take account of the project becoming a definite commitment. On the experimental side, the full Technical Proposals for the big general purpose ATLAS and CMS detectors were aired at a major meeting of the LHC Committee at CERN in January. These Technical Proposals are impressive documents each of some several hundred pages. (Summaries of the detector designs will appear in forthcoming issues of the CERN Courier.) The ALICE heavy ion experiment is not far behind, and plans for other LHC experiments are being developed. Playing an important role in this groundwork has been the Detector Research and Development Committee (DRDC), founded in 1990 to foster detector development for the LHC experimental programme and structured along the lines of a traditional CERN Experiments Committee. Established under the Director Generalship of Carlo Rubbia and initially steered by Research Director Walter Hoogland, the DRDC has done sterling work in blazing a trail for LHC experiments. Acknowledging that the challenge of LHC experimentation needs technological breakthroughs as well as specific detector subsystems, DRDC proposals have covered a wide front, covering readout electronics and computing as well as detector technology. Its first Chairman was Enzo larocci, succeeded in 1993 by Michal Turala. DRDC's role was to evaluate proposals, and make recommendations to CERN's Research Board for approval and resource allocation, not an easy task when the LHC project itself had yet to be formally approved. Over the years, a comprehensive portfolio of detector development has been built up, much of which has either led to specific LHC detector subsystems for traditional detector tasks

  15. TFTR DT preparation project status

    Energy Technology Data Exchange (ETDEWEB)

    Perry, E.D.; Dudek, L.E.

    1993-11-01

    The Tokamak Fusion Test Reactor (TFTR) research program is preparing to commence the first high power Deuterium-Tritium (DT) experiments of the US Fusion Program. Hardware upgrades to TFTR required for DT operations have been completed. This paper discusses these hardware preparations.

  16. Merging Expertise: Preparing Collaborative Educators

    Science.gov (United States)

    Altieri, Elizabeth M.; Colley, Kenna M.; Daniel, Leslie S.; Dickenson, Kathie W.

    2015-01-01

    In this article, teacher education faculty of a medium-size university, historically grounded in teacher preparation within a rural context, describe their ongoing work to transform their practice in order to prepare special and general educators who co-plan, co-teach, and co-assess with their counterparts in the field. Follow-up research with…

  17. Physiologic effects of bowel preparation

    DEFF Research Database (Denmark)

    Holte, Kathrine; Nielsen, Kristine Grubbe; Madsen, Jan Lysgård

    2004-01-01

    PURPOSE: Despite the universal use of bowel preparation before colonoscopy and colorectal surgery, the physiologic effects have not been described in a standardized setting. This study was designed to investigate the physiologic effects of bowel preparation. METHODS: In a prospective study, 12...

  18. Preparation of bubble damage detectors

    International Nuclear Information System (INIS)

    Tu Caiqing; Guo Shilun; Wang Yulan; Hao Xiuhong; Chen Changmao; Su Jingling

    1997-01-01

    Bubble damage detectors have been prepared by using polyacrylamide as detector solid and freon as detector liquid. Tests show that the prepared detectors are sensitive to fast neutrons and have proportionality between bubble number and neutron fluence within a certain range of neutron fluence. Therefore, it can be used as a fast neutron detector and a dosimeter

  19. A Simple Preparation of Hexadeuteriocholesterol

    DEFF Research Database (Denmark)

    Holm, Torkil; Crossland, Ingolf

    1996-01-01

    26,26,26,27,27,27 Hxadeuterio cholesterol has been prepared in 9 stages from pregnenolone and hexadeuterio acetone with an overall yield of 7 %.......26,26,26,27,27,27 Hxadeuterio cholesterol has been prepared in 9 stages from pregnenolone and hexadeuterio acetone with an overall yield of 7 %....

  20. Communication Games Reveal Preparation Contextuality

    Science.gov (United States)

    Hameedi, Alley; Tavakoli, Armin; Marques, Breno; Bourennane, Mohamed

    2017-12-01

    A communication game consists of distributed parties attempting to jointly complete a task with restricted communication. Such games are useful tools for studying limitations of physical theories. A theory exhibits preparation contextuality whenever its predictions cannot be explained by a preparation noncontextual model. Here, we show that communication games performed in operational theories reveal the preparation contextuality of that theory. For statistics obtained in a particular family of communication games, we show a direct correspondence with correlations in spacelike separated events obeying the no-signaling principle. Using this, we prove that all mixed quantum states of any finite dimension are preparation contextual. We report on an experimental realization of a communication game involving three-level quantum systems from which we observe a strong violation of the constraints of preparation noncontextuality.

  1. Reactor operation plan preparing device

    International Nuclear Information System (INIS)

    Sano, Hiroki; Maruyama, Hiromi; Kinoshita, Mitsuo; Fukuzaki, Koji; Banto, Masaru; Fukazawa, Yukihisa.

    1993-01-01

    The device comprises a means for retrieving a control rod pattern capable of satisfying a thermal limit upon aimed power/minimum flow rate and providing minimum xenon and a control rod pattern maximum xenon. It further comprises a means for selecting a control rod pattern corresponding to a xenon equilibrium condition, and selecting a control rod which provides a greater thermal margin to provide a control rod operation sequence for each of the patterns. Further, the device comprises an outline plan preparing means and a correction means therefor, a simplified sequence table reference means operated along with sequence change, an operation limit region input means, a control rod operation preferential region changing means, a thermal margin evaluation region and an input means. This can automatically prepare the operation plan, decrease the times for preparation of detailed plans by using the outline plan preparing function, thereby enabling to remarkably shorten the time for preparing of an operation plan. (N.H.)

  2. Preparing for climate change.

    Science.gov (United States)

    Holdgate, M

    1989-01-01

    chlorofluorocarbons (CFCs) have been released in great quantities through their use in aerosol sprays, refrigerator fluids, and insulating foams. We can get rid of CFCs and curb the pollutants generating ozone, but it will be difficult to put the brake on either methane or nitrous oxide. And the reduction in carbon dioxide emissions will demand major changes in energy policy as well as action to slow deforestation. It appears that we are already committed to rising temperatures and sea levels. The question is by how much, in which areas? A number of things can be done to prepare for these changes: Governments must recognize that there is a problem; Better models must be worked out, especially to define where the greatest impacts from climate change and sea level rise will hit; Reference scenarios must be developed to see what the impacts are likely to be in ecological, agricultural, social and economic terms; Every country should develop "avoidance strategies" to minimize risk (for example, by not building on land likely to be flooded); We must cut down on the amount of greenhouse gases released into the atmosphere from human activities, by eliminating CFCs and adopting energy conservation programs and other measures to minimize CO2 release; Global agreements to protect the atmosphere are needed. full text

  3. Preparation of bromine fluoride; Preparation du fluorure de brome

    Energy Technology Data Exchange (ETDEWEB)

    Domange, Pr; Duflo, J.

    1958-05-15

    This note addresses the preparation of bromine fluoride. It indicates the implemented process for the reaction, used products (fluorine and bromine), and column characteristics. It describes the operating mode. Apparatus drawing is provided.

  4. Methods for preparing synthetic freshwaters.

    Science.gov (United States)

    Smith, E J; Davison, W; Hamilton-Taylor, J

    2002-03-01

    Synthetic solutions that emulate the major ion compositions of natural waters are useful in experiments aimed at understanding biogeochemical processes. Standard recipes exist for preparing synthetic analogues of seawater, with its relatively constant composition, but, due to the diversity of freshwaters, a range of compositions and recipes is required. Generic protocols are developed for preparing synthetic freshwaters of any desired composition. The major problems encountered in preparing hard and soft waters include dissolving sparingly soluble calcium carbonate, ensuring that the ionic components of each concentrated stock solution cannot form an insoluble salt and dealing with the supersaturation of calcium carbonate in many hard waters. For acidic waters the poor solubility of aluminium salts requires attention. These problems are overcome by preparing concentrated stock solutions according to carefully designed reaction paths that were tested using a combination of experiment and equilibrium modeling. These stock solutions must then be added in a prescribed order to prepare a final solution that is brought into equilibrium with the atmosphere. The example calculations for preparing hard, soft and acidic freshwater surrogates with major ion compositions the same as published analyses, are presented in a generalized fashion that should allow preparation of any synthetic freshwater according to its known analysis.

  5. Beer as colon lavage preparation

    International Nuclear Information System (INIS)

    Kinnunen, J.; Linden, H.; Pietilae, J.; Juutilainen, T.

    1987-01-01

    Six patients received beer preparation prior to double contrast barium enema. The beer group scored slightly better (though not statistically significantly) both in the cleanliness and in the mucosal coating of the bowel than the control group with standard preparation. The fluid balance was unaltered. The patients in the beer group felt surprisingly well, likely due to the good fluid and energy balance provided by the beer. The beer preparation could be used in cases, when the patients are ready to intake beer and want to maintain a good nutritional status. (orig.) [de

  6. Preparing for Assisted Reproductive Technology

    Science.gov (United States)

    ... CDC Cancel Submit Search The CDC Assisted Reproductive Technology (ART) Note: Javascript is disabled or is not ... visit this page: About CDC.gov . Assisted Reproductive Technology (ART) What Is ART Patient Resources Preparing for ...

  7. Should We Extend Teacher Preparation?

    Science.gov (United States)

    Hawley, Willis D.

    1989-01-01

    Discusses the implications of five-year teacher preparation programs. Argues that different strategies and curricula should be tested and evaluated before mandating major system-wide changes in teacher certification requirements. (FMW)

  8. On Preparing for Squadron Command

    Science.gov (United States)

    1988-04-01

    Gortler, Majur Gordon D. "Management Development---Could the Air Force Be Doing More?" Resear,;h Study, Air Command and Staff College. 1 07:3. 20...ABSTRACT (Continue on reverse If necessary and identify by block number) -This study addresses the broad issue of preparing Air Force officers for...are obsolete. SECURITY CLASSIFICATION OF THIS PAGE UNCLASSIFIED - - PREFACE This study addresses the broad Issue of preparing Air Force officers to

  9. [Pediatric preparations of blood products].

    Science.gov (United States)

    Boulat, C

    2017-09-01

    The transfusion in pediatrics may require specific preparations to adapt to the various characteristics from preterm neonates to big child: weight, immaturity, immune system, blood volume, long and short-term prognosis, and to meet the needs of pathologies related to the perinatal period. The knowledge of the process for preparation, conservation and administration of these particular products shall permit a transfusion in safe conditions by supporting the prescribers in a personalized blood management. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  10. Preparing for retirement - new seminars

    CERN Multimedia

    Human Resources Department

    2015-01-01

    We would like to take the opportunity to inform you about a new programme related to retirement, organised by the Human Resources Department. Retirement marks the end of a career and the start of a new chapter in life.  In all cases, being well-informed and prepared is necessary to cope successfully with this transition. The programme has been developed for staff members and consists of two seminars: Leaving CERN (half day seminar): short presentations by internal speakers, focusing on what options CERN offers at the end of your career: organised once per year, next session scheduled on 24 November 2015, in the afternoon, enrolment and more information on Indico.   Preparation for retirement (2-day seminar): interactive workshop (in small groups) delivered by external experts, focusing on how to prepare psychologically as well as practically to cope with all the changes retirement brings: organised regularly in 2016, in English or ...

  11. Sample preparation in foodomic analyses.

    Science.gov (United States)

    Martinović, Tamara; Šrajer Gajdošik, Martina; Josić, Djuro

    2018-04-16

    Representative sampling and adequate sample preparation are key factors for successful performance of further steps in foodomic analyses, as well as for correct data interpretation. Incorrect sampling and improper sample preparation can be sources of severe bias in foodomic analyses. It is well known that both wrong sampling and sample treatment cannot be corrected anymore. These, in the past frequently neglected facts, are now taken into consideration, and the progress in sampling and sample preparation in foodomics is reviewed here. We report the use of highly sophisticated instruments for both high-performance and high-throughput analyses, as well as miniaturization and the use of laboratory robotics in metabolomics, proteomics, peptidomics and genomics. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  12. Preparation of synthetic standard minerals

    International Nuclear Information System (INIS)

    Herrick, C.C.; Bustamante, S.J.; Charls, R.W.; Cowan, R.E.; Hakkila, E.A.; Hull, D.E.; Olinger, B.W.; Roof, R.B.; Sheinberg, H.; Herrick, G.C.

    1978-01-01

    A number of techniques for synthetic mineral preparations have been examined. These techniques include hot-pressing in graphite dies at moderate pressures, high-pressure, high-temperature synthesis in a piston and cylinder apparatus, isostatic pressing under helium gas pressures, hydrous mineral preparations using water as the pressure medium, explosion-generated shock waves, and radiofrequency heating. Minerals suitable for equation-of-state studies (three-inch, high-density discs), for thermodynamic property determinations (low-density powders) and for microprobe standards (fusion-cast microbeads) have been prepared. Mechanical stress-strain calculations in the piston-cylinder apparatus have been initiated and their integration with thermal stress calculations is currently under investigation

  13. Preparation and Characterization of Graphene

    Directory of Open Access Journals (Sweden)

    Xu Man

    2015-01-01

    Full Text Available The homogeneous-dispersed graphene oxide was prepared by the improved Hummers method, which would be reduced to graphene with the reducing agent called hydrazine hydrate. The X-ray diffraction, Infrared spectroscopy, Raman spectra and Transmission electron microscopy were used to analysis the phase, morphology and structure of the graphene and graphene oxide. The results show that the graphene oxide and reduced graphene oxide prepared via this method, whose degree of oxidation and reduction are high; Also obtained a higher well-disperses and less structural imperfection of the graphene that was manufactured in the reducing system that added ammonia reduction

  14. Preparation of thin vyns films

    International Nuclear Information System (INIS)

    Blanc, R.; Chedin, P.; Gizon, A.

    1965-01-01

    The fabrication of thin films of VYNS resin (copolymer of chloride and vinyl acetate) of superficial density from 3 to 50 μg/cm 2 with solutions in cyclohexanone is presented. Study and discussion of some properties compared with formvar film (polyvinyl formals). It appears that both can be used as source supports but formvar films are prepared more easily and more quickly, in addition they withstand higher temperatures. The main quality of VYNS is that they can be easily separated even several days after their preparation [fr

  15. Process of preparing hydraulic cement

    Energy Technology Data Exchange (ETDEWEB)

    1919-12-11

    A process of preparing hydraulic cement from oil shale or shale coke is characterized in that the oil shale or shale coke after the distillation is burned long and hot to liberate the usual amount of carbonic acid and then is fine ground to obtain a slow hardening hydraulic cement.

  16. Preparation of thin nuclear targets

    International Nuclear Information System (INIS)

    Muggleton, A.H.F.

    1979-03-01

    Thin film backings, sources and targets are needed for many applications in low energy nuclear physics and nuclear chemistry experiments. A survey of techniques used in the preparation of nuclear targets is first briefly discussed. These are classified as chemical, mechanical and physical preparations. Vacuum evaporation, being the most generally used technique, is discussed in detail. It is highly desirable to monitor the film thickness and control the deposition rate during evaporation and to measure the final target thickness after deposition has concluded. The relative merits of various thickness measuring techniques are described. Stages in the fabrication and mounting of self-supporting foils are described in detail, with emphasis given to the preparation of thin self-supporting carbon foils used as target backings and stripper foils. Various target backings, and the merits of the more generally used release agents are described in detail. The preparations of more difficult elemental targets are discussed, and a comprehensive list of the common targets is presented

  17. PREPARATION AND CHARACTERIZATION OF DIALDEHYDE ...

    African Journals Online (AJOL)

    User

    Dialdehyde starch urea (DASU) was prepared by the reaction of dialdehyde starch (DAS) from ... is representative one for the treatment of heavy metal ... It was reported that Potassium ... 0.2mol/L sulfuric acid, 100cm3 of water and 2cm3 of.

  18. Preparing Instructional Leaders: A Model

    Science.gov (United States)

    Brazer, S. David; Bauer, Scott C.

    2013-01-01

    Purpose: This article proposes a model that provides one means of making instructional leadership the central focus of leadership preparation. It draws from conceptualizations of teaching and learning as well as organizational and leadership theory to advocate for greater coherence in education leadership programs. Conceptual Argument: We begin…

  19. Practicing Improvisation: Preparing Multicultural Educators

    Science.gov (United States)

    Hull, Karla

    2015-01-01

    Preparing competent multicultural educators involves a dynamic process requiring constant self-reflection and assisting pre-service teachers to sharpen their cultural vision as they learn to be responsive educators. Reflections on lessons learned as a teacher educator are shared through personal experiences that are identified as keys to prepare…

  20. Preparation methods of alginate nanoparticles

    NARCIS (Netherlands)

    Paques, J.P.; Linden, van der E.; Rijn, van C.J.M.; Sagis, L.M.C.

    2014-01-01

    This article reviews available methods for the formation of alginate nano-aggregates, nanocapsules and nanospheres. Primarily, alginate nanoparticles are being prepared by two methods. In the “complexation method”, complex formation on the interface of an oil droplet is used to form alginate

  1. Preparing Engineers for Social Responsibility

    Science.gov (United States)

    Zandvoort, H.

    2008-01-01

    In this paper I introduce the contributions to a special section of the journal: one devoted to the question of how engineering curricula can or should contribute to the preparation of graduates for socially responsible decision making and conduct. The special section is motivated by the circumstance that, although there is broad agreement that…

  2. Preparing to Test Rover Mobility

    Science.gov (United States)

    2005-01-01

    Rover engineers prepare a mixture of sandy and powdery materials to simulate some difficult Mars driving conditions inside a facility at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The tests in early May 2005 were designed to help plan the best way for the rover Opportunity to drive off of a soft-sand dune that the rover dug itself into the previous week.

  3. Automatically Preparing Safe SQL Queries

    Science.gov (United States)

    Bisht, Prithvi; Sistla, A. Prasad; Venkatakrishnan, V. N.

    We present the first sound program source transformation approach for automatically transforming the code of a legacy web application to employ PREPARE statements in place of unsafe SQL queries. Our approach therefore opens the way for eradicating the SQL injection threat vector from legacy web applications.

  4. Method for preparation of superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Barber, A.C.; McDougall, I.L.

    1975-07-10

    The invention deals with a method to prepare a superconductor consisting of a superconducting compound of at least two elements. It especially deals with superconductors which surround a superconducting intermetallic compounds of at least two elements, examples of which are Nb/sub 2/Sn and Nb/sub 3/Al.

  5. Source preparation in alpha spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Lally, A E [UKAEA Atomic Energy Research Establishment, Harwell. Environmental and Medical Sciences Div.; Glover, K M [UKAEA Atomic Energy Research Establishment, Harwell. Chemistry Div.

    1984-06-15

    Techniques, for the preparation of sources suitable for alpha spectrometric measurements are presented. These include vacuum sublimation, electrodeposition, self-deposition, direct evaporation, direct precipitation and the use of solvents and spreading agents. The relative merits of each technique and the applicability to both high and low levels of activity are considered.

  6. Preparing Learners for the Future

    Directory of Open Access Journals (Sweden)

    Olga DeJesus

    2017-12-01

    Full Text Available Book review of “Teaching in a Globally Connected World: Preparing Learners for the Future.” Edited by Ervin F. Sparapani and Pamela L. Ross McClain. Lanham, MD: Hamilton Books, 2016. ISBN: 978-0-7618-6814-9

  7. 35S cystein chlorhydrate preparation

    International Nuclear Information System (INIS)

    Emiliozzi, R.; Pichat, P.; Herbert, M.

    1960-01-01

    35 S cystein chlorhydrate has been prepared with a quantitative yield by electrolytic reduction of 35 S cystin in hydrochloric medium on a vibrating mercury cathode. Reprint of a paper published in Bulletin de la Societe chimique de France, no. 2653, 4. quarter 1959, p. 1544-1545 [fr

  8. Preparation for Ignalina NPP decommissioning

    International Nuclear Information System (INIS)

    Medeliene, D.

    2004-01-01

    Latest developments of atomic energy in Lithuania, works done to prepare Ignalina NPP for final shutdown and decommissioning are described. Information on decommissioning program for Ignalina NPP unit 1, decommissioning method, stages and funding is presented. Other topics: radiation protection, radioactive waste management and disposal. Key facts related to nuclear energy in Lithuania are listed

  9. MUET Preparation Language Learning Strategies

    Science.gov (United States)

    Kuen, Yoong Li; Embi, Mohamed Amin

    2012-01-01

    The main objective of the study was to examine the English language learning strategies (LLS) used by Lower Six students in secondary schools who are sitting for their MUET test. It analyzed the language learning strategies that students use in order to prepare for the MUET test. Data were collected using a survey questionnaire with 300 students.…

  10. Preparation of a tritiated ginkgolide

    DEFF Research Database (Denmark)

    Strømgaard, Kristian; Suehiro, Makiko; Nakanishi, Koji

    2004-01-01

    Ginkgolide B, a constituent of the tree Ginkgo biloba, was radiolabeled with the beta-emitter tritium ([(3)H]) in two steps from ginkgolide C. First, a triflate precursor was prepared utilizing the selective reactivity of 7-OH in ginkgolide C; the triflate was then reduced with sodium borotritide...

  11. Preparing for the Learning Organization.

    Science.gov (United States)

    Salner, Marcia

    1999-01-01

    A seminar to prepare students for learning organizations was based on Perry's theory of intellectual and ethical development. Developmental assignments were designed to assist cognitive growth and self-awareness. Challenges arose from differences in group composition (younger or mixed-age students) and the ethics of attempting to alter students'…

  12. PREPARATION, CHARACTERISATION AND APPLICATION OF ...

    African Journals Online (AJOL)

    Polyamine-silica hybrids were prepared by a one-pot sol-gel method via a neutral amine templating route. At low loadings (ca. 1 mmol organic group per g of silica) the resultant materials displayed properties typical of M41S-type materials, namely, high surface area (typically 600 m2 g-1) and controlled porosity with an ...

  13. Integrated Work Management: Preparer, Course 31883

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-07

    The preparer (also called the “planner”) plays a key role in the integrated work management (IWM) process at Los Alamos National Laboratory (LANL). This course, Integrated Work Management: Preparer (COURSE 31883), describes the IWM roles and responsibilities of the preparer. This course also discusses IWM requirements that must be met by the preparer.

  14. Sample preparation in alkaline media

    International Nuclear Information System (INIS)

    Nobrega, Joaquim A.; Santos, Mirian C.; Sousa, Rafael A. de; Cadore, Solange; Barnes, Ramon M.; Tatro, Mark

    2006-01-01

    The use of tetramethylammonium hydroxide, tertiary amines and strongly alkaline reagents for sample treatment involving extraction and digestion procedures is discussed in this review. The preparation of slurries is also discussed. Based on literature data, alkaline media offer a good alternative for sample preparation involving an appreciable group of analytes in different types of samples. These reagents are also successfully employed in tailored speciation procedures wherein there is a critical dependence on maintenance of chemical forms. The effects of these reagents on measurements performed using spectroanalytical techniques are discussed. Several undesirable effects on transport and atomization processes necessitate use of the method of standard additions to obtain accurate results. It is also evident that alkaline media can improve the performance of techniques such as inductively coupled plasma mass spectrometry and accessories, such as autosamplers coupled to graphite furnace atomic absorption spectrometers

  15. Preparation of superconductor precursor powders

    Science.gov (United States)

    Bhattacharya, Raghunath

    1998-01-01

    A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

  16. Preparation of conducting solid mixtures

    International Nuclear Information System (INIS)

    Spokas, J.J.

    1978-01-01

    The application of conducting plastic mixtures to the fundamental problem of radiation dosimetry is briefly reviewed. A particular approach to achieving formulations with the necessary characteristics is described. A number of successful mixtures are defined for a number of different specific dosimetry situations. To obtain high quality stable materials requires intense blending and working of the materials at elevated temperatures. One machine that succeeds in this task is the Shonka plastics mixer-extruder. The Shonka mixer is described in complete detail. The procedures used in preparing representative formulations with this device are presented. A number of properties of successful conducting mixtures so prepared are summarized. The conditions required for molding such material are given. Several special welding methods for specific application with these formulations have been devised and are described

  17. Nanodiamond applications in skin preparations.

    Science.gov (United States)

    Namdar, Roshanak; Nafisi, Shohreh

    2018-04-13

    The biocompatibility and nontoxicity of nanodiamonds (NDs) in combination with their excellent physical performance have rendered them attractive candidates for biomedical applications. NDs have great potential in drug nanoformulations because of their small size compared with other carbon nanomaterials. They are nontoxic with excellent adsorption properties and can be formulated into skin care products. Even though NDs have shown encouraging potential in skin preparations, only a few studies have reviewed their application in topical drug delivery systems. Therefore, here we focus on the application of NDs in skin care preparations, skin cancer medication, and wound healing. We also highlight the development of topical drug delivery by NDs and their cytotoxicity. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. SLAC Linac Preparations for FACET

    International Nuclear Information System (INIS)

    Erickson, Roger

    2011-01-01

    The SLAC 3km linear electron accelerator has been cut at the two-thirds point to provide beams to two independent programs. The last third provides the electron beam for the Linac Coherent Light Source (LCLS), leaving the first two-thirds available for FACET, the new experimental facility for accelerator science and test beams. In this paper, we describe this separation and projects to prepare the linac for the FACET experimental program.

  19. Techniques for preparing isotopic targets

    International Nuclear Information System (INIS)

    Xu Guoji; Guan Shouren; Luo Xinghua; Sun Shuhua

    1987-12-01

    The techniques of making isotopic targets for nuclear physics experiments are introduced. Vacuum evaporation, electroplating, centrifugal precipitation, rolling and focused heavy-ion beam sputtering used to prepare various isotopic targets at IAE are described. Reduction-distillation with active metals and electrolytic reduction for converting isotope oxides to metals are mentioned. The stripping processes of producing self-supporting isotopic targets are summarized. The store methods of metallic targets are given

  20. Preparation and isolation of isobenzofuran

    Directory of Open Access Journals (Sweden)

    Morten K. Peters

    2017-12-01

    Full Text Available The synthesis, isolation and characterization of isobenzofuran are described in this publication. Isobenzofuran is of general interest in synthetic and physical organic chemistry because it is one of the most reactive dienes known. A number of synthetic pathways have been published which all suffer from disadvantages such as low yields and difficult purification. We present a synthetic pathway to prepare isobenzofuran in laboratory scale with high yields, from affordable, commercially available starting materials.

  1. Preparation of refined oils, etc

    Energy Technology Data Exchange (ETDEWEB)

    1931-02-03

    A process is disclosed for the preparation of refined sulfur-containing oils from sulfur-containing crude oils obtained by distillation of bituminous limestone, characterized by this crude oil being first subjected to a purification by distillation with steam in the known way, then treated with lime and chloride of lime and distilled preferably in the presence of zinc powder, whereby in this purification a rectification can be added for the purpose of recovering definite fractions.

  2. Method for preparing ceramic composite

    Science.gov (United States)

    Alexander, K.B.; Tiegs, T.N.; Becher, P.F.; Waters, S.B.

    1996-01-09

    A process is disclosed for preparing ceramic composite comprising blending TiC particulates, Al{sub 2}O{sub 3} particulates and nickel aluminide and consolidating the mixture at a temperature and pressure sufficient to produce a densified ceramic composite having fracture toughness equal to or greater than 7 MPa m{sup 1/2}, a hardness equal to or greater than 18 GPa. 5 figs.

  3. Preparing for an Uncertain Forecast

    Science.gov (United States)

    Karolak, Eric

    2011-01-01

    Navigating the world of government relations and public policy can be a little like predicting the weather. One can't always be sure what's in store or how it will affect him/her down the road. But there are common patterns and a few basic steps that can help one best prepare for a change in the forecast. Though the forecast is uncertain, early…

  4. Synchrotron/crystal sample preparation

    Science.gov (United States)

    Johnson, R. Barry

    1993-01-01

    The Center for Applied Optics (CAO) of the University of Alabama in Huntsville (UAH) prepared this final report entitled 'Synchrotron/Crystal Sample Preparation' in completion of contract NAS8-38609, Delivery Order No. 53. Hughes Danbury Optical Systems (HDOS) is manufacturing the Advanced X-ray Astrophysics Facility (AXAF) mirrors. These thin-walled, grazing incidence, Wolter Type-1 mirrors, varying in diameter from 1.2 to 0.68 meters, must be ground and polished using state-of-the-art techniques in order to prevent undue stress due to damage or the presence of crystals and inclusions. The effect of crystals on the polishing and grinding process must also be understood. This involves coating special samples of Zerodur and measuring the reflectivity of the coatings in a synchrotron system. In order to gain the understanding needed on the effect of the Zerodur crystals by the grinding and polishing process, UAH prepared glass samples by cutting, grinding, etching, and polishing as required to meet specifications for witness bars for synchrotron measurements and for investigations of crystals embedded in Zerodur. UAH then characterized these samples for subsurface damage and surface roughness and figure.

  5. PREPARATION FOR RETIREMENT - AVS SEMINAR

    CERN Multimedia

    Social Service

    2001-01-01

    The 500 or so participants in the fifth Preparation for Retirement seminar held at the end of March were unfortunately deprived of the planned session on the AVS due to the unavailability of the Director of the Caisse Cantonale Genevoise de Compensation (CCGC). We have since had formal confirmation that because of an extra workload due to important changes in the Swiss tax and social legislation and the implementation this summer of the maternity insurance in Geneva, the CCGC has suspended its participation in preparation for retirement seminars in the international organisations for the time being. Conscious of the necessity of offering a session dedicated to the AVS, it is with pleasure that we can inform you that one of our legal advisers, Mr Lorenz Stampfli, has accepted to lead this session. In order to allow for adequate preparation we have reserved the following date: Wednesday 26 September from 14.00 to 16.00 in the Main Amphitheatre The session will be open to all people already registered and any o...

  6. Development of 103Pd preparation

    International Nuclear Information System (INIS)

    Tri Murni

    2003-01-01

    Development of 1 03 P d preparation. Radioisotope of 1 03 P d was prepared for medical purpose patient suffering prostate cancer at early stage for therapeutic treatment. In the form of seed, the 1 03 P d radioisotope as a curing agent for prostate cancer is the most effective form with the least side effect. Radioisotope of 1 03 P d is the radioisotope emitting γ of 357 keV. In this investigation 1 03 P d was prepared from natural Pd powder or 1 02 P d enriched bombarded using thermal neutron in the reactor with 1 02 P d( n, γ) 1 03 P d reaction and 1 03 P d radioisotope was obtained. The target was then added with hydrogen peroxide after a with 1N HCl was added followed by drying . Then 2N NH 4 OH was added until the pH of the solution reached 8-10. In every steps of the process, the analysis were performed using MCA while the radiochemical purity were analyses using paper chromatography. The end result of the dissolution process showed that it is an accord with 1 03 P dCl 2 in NH 4 OH solution specification of Nordion

  7. Rhenium Nanochemistry for Catalyst Preparation

    Directory of Open Access Journals (Sweden)

    Vadim G. Kessler

    2012-08-01

    Full Text Available The review presents synthetic approaches to modern rhenium-based catalysts. Creation of an active center is considered as a process of obtaining a nanoparticle or a molecule, immobilized within a matrix of the substrate. Selective chemical routes to preparation of particles of rhenium alloys, rhenium oxides and the molecules of alkyltrioxorhenium, and their insertion into porous structure of zeolites, ordered mesoporous MCM matrices, anodic mesoporous alumina, and porous transition metal oxides are considered. Structure-property relationships are traced for these catalysts in relation to such processes as alkylation and isomerization, olefin metathesis, selective oxidation of olefins, methanol to formaldehyde conversion, etc.

  8. Chuanxiong preparations for preventing stroke.

    Science.gov (United States)

    Yang, Xunzhe; Zeng, Xiaoxi; Wu, Taixiang

    2010-01-20

    Stroke is a major healthcare problem and is one of the leading causes of death and serious long-term disability. Prevention of stroke is considered an important strategy. Chuanxiong is traditionally used in China in the treatment and prevention of stroke. In recent years, Chinese researchers have developed new patented Chuanxiong preparations. To assess the effects and safety of Chuanxiong preparations in preventing stroke in high-risk adults. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (2008, Issue 1), MEDLINE (1950 to March 2008), EMBASE (1980 to March 2008), AMED (1985 to March 2008), Chinese Biomedical Database (CBM) (1975 to March 2008), China National Knowledge Infrastructure (CNKI) (1994 to March 2008), and the VIP Database (1989 to March 2008). Trials registers were searched for ongoing studies. No language restrictions were applied. Randomised controlled trials (RCTs) studying the effects of Chuanxiong preparations in preventing stroke were included. Three reviewers independently selected studies for inclusion and two reviewers independently extracted data. Authors of identified RCTs were telephoned to confirm the randomisation procedure. Outcomes assessed included: stroke, composite cardiovascular outcomes, changes in cardiovascular and cerebrovascular haemodynamic indices and adverse events. Peto odds ratio (OR) with 95% confidence intervals (CI) were calculated for dichotomous variables and mean differences for continuous outcomes. Three RCTs (5042 participants) were included. One higher quality study (4415 participants) compared Nao-an capsule with aspirin for primary prevention in high-risk stroke populations. Nao-an capsule appeared to reduce the incidence of stroke compared with aspirin (OR 0.56 95% CI 0.33 to 0.96). One study of low methodological quality indicated that a self-prepared Xifenwan tablet reduced the incidence of stroke in people with transient ischaemia attack (TIA) (OR 0.18, 95% CI 0.04 to 0.78). The

  9. Preparing valuable hydrocarbons by hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M

    1930-08-22

    A process is described for the preparation of valuable hydrocarbons by treatment of carbonaceous materials, like coal, tars, minerals oils, and their distillation and conversion products, and for refining of liquid hydrocarbon mixture obtained at raised temperature and under pressure, preferably in the presence of catalysts, by the use of hydrogen-containing gases, purified and obtained by distilling solid combustibles, characterized by the purification of the hydrogen-containing gases being accomplished for the purpose of practically complete removal of the oxygen by heating at ordinary or higher pressure in the presence of a catalyst containing silver and oxides of metals of group VI of the periodic system.

  10. PREPARATION OF OXOPORPHINATOMANGANESE (IV) COMPLEX

    Energy Technology Data Exchange (ETDEWEB)

    Willner, I.; Otvos, J.; Calvin, M.

    1980-07-01

    Oxo-manganese-tetraphenylporphyrin (O=Mn{sup IV}-TPP) has been prepared by an oxygen-transfer reaction from iodosylbenzene to MnIITPP and characterized by its i.r. and field desorption mass spectra, which are identical to those of the product obtained by direct oxidation of Mn{sup III}(TPP) in an aqueous medium; it transfers oxygen to triphenylphosphine to produce triphenylphosphine oxide, and it is suggested that similar intermediates are important in oxygen activation by cytochrome P-450 as well as in the photosynthetic evolution of oxygen.

  11. Preparation of inorganic hydrophobic catalysts

    International Nuclear Information System (INIS)

    Yang, Yong; Wang, Heyi; Du, Yang

    2009-04-01

    In order to catalyse the oxidation of tritium gas, two inorganic hydrophobic catalysts are prepared. Under room temperature, the catalysed oxidation ratio of 0.3%-1% (V/V) hydrogen gas in air is higher than 95%. Pt-II inorganic hydrophobic catalysts has obviously better catalysing ability than Pt-PTFE and lower ability than Pt-SDB in H 2 -HTO isotopic exchange, because the pressure resistence of Pt-II is much higher than Pt-SDB, it can be used to the CECE cell of heavy water detritium system. (authors)

  12. PREPARATION FOR FRANCHISING TIMIN GRILLI

    OpenAIRE

    Bui, Thanh

    2015-01-01

    The thesis was conducted based on the expansion plan of Timin Grilli, which is a food trailer located in market square of Kokkola. After more than fifteen years operating, it needs to be developed in other way; and in this case the business aims to operate under form of franchise company. In addition, the owner also tends to combine fast-food style with Vietnamese-Chinese cuisine that has not been common these days. The aim of this thesis was to provide general and initial preparation fo...

  13. A Simple Preparation Method for Diphosphoimidazole

    DEFF Research Database (Denmark)

    Rosenberg, T.

    1964-01-01

    A simple method for the preparation of diphosphoimidazole is presented that involves direct phosphorylation of imidazole by phosphorus oxychloride in alkaline aqueous solution. Details are given on the use of diphosphoimidazole in preparing sodium phosphoramidate and certain phosphorylated amino...

  14. Food Safety When Preparing Holiday Meals

    Science.gov (United States)

    ... Public Health Current: Remember Food Safety when Preparing Holiday Meals Services and Programs Regulation & Licensure Vital Records ... food safety is especially important as they prepare holiday meals. Many holiday dinners include meat and poultry, ...

  15. FFTF operations procedures preparation guide. Revision 2

    International Nuclear Information System (INIS)

    1976-12-01

    The Guide is intended to provide guidelines for the initial preparation of FFTF Operating Procedures. The Procedures Preparation Guide was developed from the plan presented and approved in the FFTF Reactor Plant Procedures Plan, PC-1, Revision 3

  16. How to select BCAA preparations.

    Science.gov (United States)

    Kato, Akinobu; Suzuki, Kazuyuki

    2004-12-01

    In Japan, oral branched-chain amino acid (BCAA) preparations are used in nutritional therapy for correcting disorders of protein and amino acid metabolism in patients with liver cirrhosis. There are two forms of oral BCAA preparations: enteral nutrition products for liver failure (or elemental nutrition products for liver cirrhosis) and oral BCAA granular products. Granular products are indicated for patients with uncompensated liver cirrhosis who have no dietary restriction and hypoproteinemia. Enteral nutrition products are indicated for patients who have a history of hepatic encephalopathy and exhibit protein intolerance. In clinical practice, the existence of protein intolerance in patients with uncompensated liver cirrhosis should be determined based on a history of hepatic encephalopathy and blood ammonia concentration. When patients exhibit protein intolerance, they are given a low protein diet (approximately 0.5-1.0g/kg/day) with enteral nutrition products for liver failure. However, when patients consume adequate amounts of a well-balanced diet and ammonia concentration does not increase, it is possible to control their condition with granular products. However, when patients cannot achieve an adequate dietary intake, it is recommended that enteral nutrition products should be used in order to improve nutritional status, even if these patients do not have a history of encephalopathy.

  17. Reactor modification, preparation and operation

    International Nuclear Information System (INIS)

    Weill, J.; Furet, J.; Baillet, J.; Donvez, G.; Duchene, J.; Gras, R.; Mercier, R.; Chenouard, J.; Leconte, J.

    1962-01-01

    In the course of preparations for the dosimetry experiment at the R-B reactor the control and safety equipment of the reactor was found to be inadequate for operation at a constant power level of several watts. After completing the study of control and safety issues by CEA, safety and control were defined for the purpose of the Joint Dosimetry Experiment. Preparations for the Dosimetry Experiment included: installation of equipment for control and safety of the reactor; supplying 6570 Kg of heavy water by UK, reinforcement of the reactor wall on the outside of the building; constructing the protection of the control room; start-up, measuring of the critical heavy water level, and check of control and safety rods worth. After the final check of safety rod mechanisms, eight runs were performed at a power of 5 Watt, and then a 1 k Watt run was carried out and the power stabilized at this power for 30 min by automatic control system

  18. Reactor modification, preparation and operation

    Energy Technology Data Exchange (ETDEWEB)

    Weill, J; Furet, J; Baillet, J; Donvez, G; Duchene, J; Gras, R; Mercier, R [Electronics Dept., Independent Section of Reactor Electronics, Saclay (France); Chenouard, J; Leconte, J [Dept. of Physical Chemistry, Stable Isotopes Section, Saclay (France)

    1962-03-15

    In the course of preparations for the dosimetry experiment at the R-B reactor the control and safety equipment of the reactor was found to be inadequate for operation at a constant power level of several watts. After completing the study of control and safety issues by CEA, safety and control were defined for the purpose of the Joint Dosimetry Experiment. Preparations for the Dosimetry Experiment included: installation of equipment for control and safety of the reactor; supplying 6570 Kg of heavy water by UK, reinforcement of the reactor wall on the outside of the building; constructing the protection of the control room; start-up, measuring of the critical heavy water level, and check of control and safety rods worth. After the final check of safety rod mechanisms, eight runs were performed at a power of 5 Watt, and then a 1 k Watt run was carried out and the power stabilized at this power for 30 min by automatic control system.

  19. Explosive double salts and preparation

    Science.gov (United States)

    Cady, Howard H.; Lee, Kien-yin

    1984-01-01

    Applicants have discovered a new composition of matter which is an explosive addition compound of ammonium nitrate (AN) and diethylenetriamine trinitrate (DETN) in a 50:50 molar ratio. The compound is stable over extended periods of time only at temperatures higher than 46.degree. C., decomposing to a fine-grained eutectic mixture (which is also believed to be new) of AN and DETN at temperatures lower than 46.degree. C. The compound of the invention has an x-ray density of 1.61 g/cm.sup.3, explodes to form essentially only gaseous products, has higher detonation properties (i.e., detonation velocity and pressure) than those of any mechanical mixture having the same density and composition as the compound of the invention, is a quite insensitive explosive material, can be cast at temperatures attainable by high pressure steam, and is prepared from inexpensive ingredients. Methods of preparing the compound of the invention and the fine-grained eutectic composition of the invention are given.

  20. Reactor modification, preparation and operation

    Energy Technology Data Exchange (ETDEWEB)

    Weill, J; Furet, J; Baillet, J; Donvez, G; Duchene, J; Gras, R; Mercier, R [Electronics Dept., Independent Section of Reactor Electronics, Saclay (France); Chenouard, J; Leconte, J [Dept. of Physical Chemistry, Stable Isotopes Section, Saclay (France)

    1962-03-01

    In the course of preparations for the dosimetry experiment at the R-B reactor the control and safety equipment of the reactor was found to be inadequate for operation at a constant power level of several watts. After completing the study of control and safety issues by CEA, safety and control were defined for the purpose of the Joint Dosimetry Experiment. Preparations for the Dosimetry Experiment included: installation of equipment for control and safety of the reactor; supplying 6570 Kg of heavy water by UK, reinforcement of the reactor wall on the outside of the building; constructing the protection of the control room; start-up, measuring of the critical heavy water level, and check of control and safety rods worth. After the final check of safety rod mechanisms, eight runs were performed at a power of 5 Watt, and then a 1 k Watt run was carried out and the power stabilized at this power for 30 min by automatic control system.

  1. MUET Preparation Language Learning Strategies

    Directory of Open Access Journals (Sweden)

    Yoong Li Kuen

    2012-01-01

    Full Text Available The main objective of the study was to examine the English language learning strategies (LLS used by Lower Six students in secondary schools who are sitting for their MUET test. It analyzed the language learning strategies that students use in order to prepare for the MUET test. Data were collected using a survey questionnaire with 300 students. The instrument used in this study called “MUET Preparation Language Strategy Use Inventory” is an adapted and bilingual questionnaire designed by Cohen, Oxford and Chi (2005 known as Language Strategy Use Inventory. Forty items were analyzed and they comprised of the four skills tested in MUET which is listening, speaking, reading and writing. Data were analyzed by performing frequency analysis. The findings revealed that the listening skill is the most frequently used, while the writing skill is the least frequently used. Only the listening skill has high frequency of use, while the reading, speaking and writing skills fall under the range of moderate frequency of use. There were variations in responses with regard to the use of LLS among Form Six students in secondary schools. The findings had practical implications.

  2. 40 CFR 761.323 - Sample preparation.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Sample preparation. 761.323 Section... Remediation Waste Samples § 761.323 Sample preparation. (a) The comparison study requires analysis of a... concentrations by dilution. Any excess material resulting from the preparation of these samples, which is not...

  3. Teachers' Self-Assessed Level of Preparation

    Science.gov (United States)

    White, Susan

    2013-01-01

    We asked high school physics teachers to assess their level of preparation across a number of domains. Almost all (98%) reported feeling adequately or well prepared in terms of their basic physics knowledge. The chart presents teachers' responses to their self-assessed level of preparation in six different areas. Almost all feel at least…

  4. Preparation and characterization of lamivudine microcapsules using ...

    African Journals Online (AJOL)

    Purpose: The objective of the present study was to prepare and evaluate microcapsules for the controlled release of lamivudine using various cellulose polymers. Methods: The microcapsules were prepared by the solvent evaporation method. The prepared microcapsules were characterized for the percent drug content, ...

  5. Preparation methodology of radiation - curable resin

    International Nuclear Information System (INIS)

    Dahlan bin Haji Mohd; Hussin bin Mohd Nor; Mohamad Hilmi bin Mahmood.

    1989-01-01

    Two types of unsaturated polyester have been prepared according to normal alkyd methods of preparation. In this work the emphasis has been given to the preparation methodology of unsaturated polyesters in styrene. Their molecule weight distributions fall between normal alkyd's i.e. 2500 to 3500. (author)

  6. Procedure for preparation of dispersions

    International Nuclear Information System (INIS)

    1978-01-01

    Procedure for the preparation of a water based dispersion of cerium oxide, characterised in that a suspension of cerium (IV) hydroxide is formed with an acid, where the acid is in the state of a disaggregation of aggregated crystalline cerium hydroxide, the suspension being preheated for a specified time and to a specified temperature, so that the pH value becomes constant, and whereby the quantity of acid in the suspension is such that the constant pH value is lower than 5.4, so that a conditioned suspension may be obtained, and water may be mixed with the conditioned suspension for making a water based dispersion of cerium oxide. (G.C.)

  7. Debridement and wound bed preparation.

    Science.gov (United States)

    Falabella, Anna F

    2006-01-01

    Debridement can play a vital role in wound bed preparation and the removal of barriers that impair wound healing. In accordance with the TIME principles, debridement can help remove nonviable tissue, control inflammation or infection, decrease excess moisture, and stimulate a nonadvancing wound edge. There are many types of debridement, each with a set of advantages and disadvantages that must be clearly understood by the healthcare team. Failure to use the correct debridement method for a given type of wound may lead to further delays in healing, increase patient suffering, and unnecessarily increase the cost of care. This review article discusses the various methods of debridement, describes currently available debriding agents, evaluates the clinical data regarding their efficacy and safety, and describes strategies for the management of problematic nonhealing wounds.

  8. Preparing for a Product Platform

    DEFF Research Database (Denmark)

    Fiil-Nielsen, Ole; Munk, Lone; Mortensen, Niels Henrik

    2005-01-01

    on commonalities and similarities in the product family, and variance should be based on customer demands. To relate these terms and to improve the basis on which decisions are made, we need a way of visualizing the hierarchy of the product family as well as the commonality and variance. This visualization method...... of the platform or ensuring that the platform can meet future demands will be very useful in the preparation process of a platform synthesis as well as in the updating or reengineering of an existing product development platform.......Experience in the industry as well as recent related scientific publications show the benefits of product development platforms. Companies use platforms to develop not a single but multiple products (i.e. a product family) simultaneously. When these product development projects are coordinated...

  9. Preparation of deuterated succinic acids

    Energy Technology Data Exchange (ETDEWEB)

    Tashiro, Masashi; Tsuzuki, Hirohisa; Goto, Hideyuki; Ogasahara, Shoji; Mataka, Shuntaro (Kyushu Univ., Fukuoka (Japan)); Isobe, Shin-ichiro; Yonemitsu, Tadashi (Kyushu Sangyo Univ., Fukuoka (Japan). Dept. of Industrial Chemistry)

    1991-04-01

    Succinic (2,3-{sup 2}H{sub 2})- and (2,2,3,3-{sup 2}H{sub 4})-acids were prepared from maleic anhydride and dimethyl fumarate, and acetylene dicarboxylic acid and its dimethyl ester by treatment with Cu-Al and Ni-Al alloys in 10% NaOD-D{sub 2}0 in 95% to 100% isotopic purity. The succinic {sup 2}H{sub 4} acid having high isotopic purity was also obtained on the hydrolysis of 1,2-ethanedinitrile with alkaline deuterium oxide. Based on the {sup 1}H({sup 2}H) spectra analysis of N-(o-biphenyl)(2,3-{sup 2}H{sub 2})succinimide, it was elucidated that the Raney alloy reduction with alkaline deuterium oxide proceeds stepwise. (author).

  10. Method of preparing radionuclide doses

    International Nuclear Information System (INIS)

    Kuperus, J.H.

    1987-01-01

    A method is described of preparing aliquot dosea of a tracer material useful in diagnostic nuclear medicine comprising: storing discrete quantities of a lyophilized radionuclide carrier in separate tubular containers from which air and moisture is excluded, selecting from the tubular containers a container in which is stored a carrier appropriate for a nuclear diagnostic test to be performed, interposing the selected container between the needle and the barrel of a hypodermic syringe, and drawing a predetermined amount of a liquid containing a radionuclide tracer in known concentration into the hypodermic syringe barrel through the hypodermic needle and through the selected container to dissolve the discrete quantity of lyophilized carrier therein to combine the carrier with the radionuclide tracer to form an aliquot dose of nuclear diagnostic tracer material, as needed

  11. Preparation of calcium phosphate paste

    International Nuclear Information System (INIS)

    Mohd Reusmaazran Yusof; Norzita Yaacob; Idris Besar; Che Seman Mahmood; Rusnah Mustafa

    2010-01-01

    Calcium phosphate paste were prepared by mixing between calcium sodium potassium phosphate, Ca 2 NaK (PO 4 ) 2 (CSPP) and monocalcium phosphate monohydrate, Ca(H 2 PO 4 ) 2 .H 2 O (MCPM). CSPP were obtained by reaction between calcium hydrogen phosphate (CaHPO 4 ), potassium carbonate (K 2 CO 3 ) and sodium carbonate (Na 2 CO 3 ) in solid state sintering process followed by quenching in air at 1000 degree Celsius. The paste was aging in simulated body fluid (SBF) for 0.5, 1, 3, 6, 12, 24, 48 hrs, 3, 7 and 14 days. The morphological investigation indicated the formation of apatite crystal were first growth after 24 hours. The obvious growth of apatite crystal was shown at 3 days. The obvious growth of apatite crystal was shown in 7 and 14 days indicated the prediction of paste would have rapid reaction with bone after implantation. (author)

  12. Preparation of albumin radioimmunoassay kit

    International Nuclear Information System (INIS)

    Chen Suoshu; Wang Yanzhen; Wang Zhenshan

    1990-01-01

    This paper presents the preparation of Albumin (Alb) radioimmunoassay kit and its preliminary clinical application. The kit is mainly applied to the measurement of Alb concentration in human urine, adopting second antibody-PEG method. The measurement range is (1-50 μg/ml). The curve obtained with a serially diluted urine sample of high Alb concentration was a straight line. Recovery, detectability, intra- and inter-batch variation coefficients were 95.7%-103.6%, 0.1 μg/ml, 5.8% and 6.4% respectively. The kit was tried out clinically for measuring Alb in urine samples in about 1200 normal individuals and 600 various patients of related renal diseases. The preliminary clinical results show that Alb RIA is conducive to the early diagnosis of kidney function abnormalities

  13. Preparation of GST Fusion Proteins.

    Science.gov (United States)

    Einarson, Margret B; Pugacheva, Elena N; Orlinick, Jason R

    2007-04-01

    INTRODUCTIONThis protocol describes the preparation of glutathione-S-transferase (GST) fusion proteins, which have had a wide range of applications since their introduction as tools for synthesis of recombinant proteins in bacteria. GST was originally selected as a fusion moiety because of several desirable properties. First and foremost, when expressed in bacteria alone, or as a fusion, GST is not sequestered in inclusion bodies (in contrast to previous fusion protein systems). Second, GST can be affinity-purified without denaturation because it binds to immobilized glutathione, which provides the basis for simple purification. Consequently, GST fusion proteins are routinely used for antibody generation and purification, protein-protein interaction studies, and biochemical analysis.

  14. Aerosol preparation of intact lipoproteins

    Science.gov (United States)

    Benner, W Henry [Danville, CA; Krauss, Ronald M [Berkeley, CA; Blanche, Patricia J [Berkeley, CA

    2012-01-17

    A medical diagnostic method and instrumentation system for analyzing noncovalently bonded agglomerated biological particles is described. The method and system comprises: a method of preparation for the biological particles; an electrospray generator; an alpha particle radiation source; a differential mobility analyzer; a particle counter; and data acquisition and analysis means. The medical device is useful for the assessment of human diseases, such as cardiac disease risk and hyperlipidemia, by rapid quantitative analysis of lipoprotein fraction densities. Initially, purification procedures are described to reduce an initial blood sample to an analytical input to the instrument. The measured sizes from the analytical sample are correlated with densities, resulting in a spectrum of lipoprotein densities. The lipoprotein density distribution can then be used to characterize cardiac and other lipid-related health risks.

  15. More and Better Prepared Teachers, More and Better Prepared Majors

    Science.gov (United States)

    Stewart, Gay

    2010-02-01

    A more scientifically literate society benefits physics as a profession. It is best realized by better serving all undergraduate physics students. Arguably, the most important are future K-12 teachers. In better serving all students, the department also benefits. University of Arkansas, Fayetteville has seen a drastic change in number of majors, the number of students active in research and the number of graduates pursuing graduate work while also increasing the number of majors who decide to teach. Building these numbers and strengthening these resources at Arkansas began with an NSF course revision project, grew as a we became primary program institution in the Physics Teacher Education Coalition (www.PTEC.org), received a Noyce Scholarship grant, and now continues in our building of an NSF Math Science Partnership utilizing our experiences coupled with PTRA materials, and expanding our efforts to Mathematics. Through APLU's SMTI, we are making changes in chemistry as well. These efforts will be discussed, with additional information on PTEC which is bringing together innovative ideas and practices throughout the country to help meet the critical shortage of well prepared and actively supported teachers. )

  16. Process for preparing coating materials

    International Nuclear Information System (INIS)

    Ryoke, Hideyasu; Kobayashi, Juichi; Kobayashi, Kei.

    1972-01-01

    A coating material curable with ionizing radiations or ultraviolet radiation can be prepared by reacting a compound (A) having one OH group and at least one α,β-ethylenic or allyl group with a polyisocyanate. (A) is a diester of a dicarboxylic acid. One of the ester groups may have a terminal α,β-ethylenic or allyl group and the other contains one OH and one α,β-ethylenic or allyl group. (A) is reacted with a polyisocyanate to yield an urethane. The latter may be diluted with a vinyl monomer. When exposed to a radiation, the coating material cures to give a film excellent in adhesion, impact strength and resistances to pollution, water and solvents. Dose of the ionizing radiation (α-, β-, γ-rays, electron beams) is 0.2-20 Mrad. In one example, 116 parts of 2-hydroxyethyl acrylate was reacted with 148 parts of phthalic anhydride and 142 parts of glycidyl methacrylate to give (A). (A) was reacted with 87 parts of tolylenediisocyanate. A metallic panel was coated with the coating material and cured with electron beams (5 Mrad). Pencil hardness was H, and gel fraction measured in acetone was above 97%. The coating was excellent in resistances to solvent and chemicals, impact strength and adhesion. (Kaichi, S.)

  17. Process for preparing thermoplastic resins

    International Nuclear Information System (INIS)

    Miyauchi, Shinnosuke; Onishi, Shunji.

    1971-01-01

    A process for preparing novel graft polymers of acrolein is provided. The process comprises immersing a polymer of ethylenic monomer into a mixture of acrolein, CCl 4 and an alcohol to let the polymer swell to a small extent, followed by irradiating it by the use of isotopes, accelerators or a reactor (absorbed dose 1.0 to 1.5 Mrad). Aldehyde/ether ratio in the side chain can be controlled by varying the concentration of CCl 4 . The maximum graft ratio attainable is about 20%. No acrolein homopolymer is formed. The product exhibits a very high adhesive strength to glass. In one example, a polystyrene film (20μ in thickness, 150 mg) was sealed into an evacuated glass ampoule together with ethanol (13 cc), acrolein (1 cc) and CCl 4 (1 cc) and irradiated with Co-60 gamma rays (1.1 x 10 4 R/hr, 198 hrs). Graft ratio was 11.2%. Gel fraction (extraction with benzene) 0%. Aldehyde structure in the side chain 22%. Adhesive strength to glass: more than 50 kg/cm 2 . (Kaichi, S.)

  18. LHC Report: Restart preparations continue

    CERN Multimedia

    Katy Foraz for the LHC team and Julia Trummer for the RP Group

    2012-01-01

    Maintenance and consolidation work has been progressing well in both the machine and the experiments in preparation for the March restart.   A sample material is attached to the LHC (the white bag taped to the green line), to measure the radiation doses. Additional work was required around Point 5 due to the discovery and repair of a problem with the RF fingers at the connection of two beam vacuum chambers in CMS. The repair has been completed successfully and the sector is now under vacuum. In order to avoid rushing the delicate final operations required for closing the detector, the restart of the machine has been postponed by one week, from 7 March to 14 March. In the machine, the first cool-down to 1.9 K has started in several sectors ,and the cool-down of the whole machine is still planned to be finished by 21 February. The time window between 22 February and 14 March will be dedicated to powering and cryogenic tests. Since 12 December, the Radiation Protection (RP) group has been deep...

  19. [Bioequivalence studies of pharmaceutical preparations].

    Science.gov (United States)

    Vetchý, D; Frýbortová, K; Rabisková, M; Danecková, H

    2007-01-01

    Bioequivalence studies are very important for the development of a pharmaceutical preparation in the pharmaceutical industry. Their rationale is the monitoring of pharmacokinetic and pharmacodynamic parameters after the administration of tested drugs. The target of such study is to evaluate the therapeutic compatibility of tested drugs (pharmaceutical equivalents or pharmaceutical alternatives). The importance of bioequivalence studies is increasing also due to the large growth of the production and consumption of generic products. Generic products represent approximately 50 % of the whole consumption in many European countries and USA. The search output of bioequivalence study is together with the pharmaceutical quality data of medical product one of the main part of the registration file submitted to a national regulatory authorities. The registration of generic products does not demand complicated and expensive clinical study contrary to original product. The comparison of the original and the generic product via bioequivalence study is suggested as sufficient. The aim of this article is to provide to a medical public a summary about the types of bioequivalence studies, their range, rules of their practise and let them gain their own attitude to this question.

  20. Dynamized Preparations in Cell Culture

    Directory of Open Access Journals (Sweden)

    Ellanzhiyil Surendran Sunila

    2009-01-01

    Full Text Available Although reports on the efficacy of homeopathic medicines in animal models are limited, there are even fewer reports on the in vitro action of these dynamized preparations. We have evaluated the cytotoxic activity of 30C and 200C potencies of ten dynamized medicines against Dalton's Lymphoma Ascites, Ehrlich's Ascites Carcinoma, lung fibroblast (L929 and Chinese Hamster Ovary (CHO cell lines and compared activity with their mother tinctures during short-term and long-term cell culture. The effect of dynamized medicines to induce apoptosis was also evaluated and we studied how dynamized medicines affected genes expressed during apoptosis. Mother tinctures as well as some dynamized medicines showed significant cytotoxicity to cells during short and long-term incubation. Potentiated alcohol control did not produce any cytotoxicity at concentrations studied. The dynamized medicines were found to inhibit CHO cell colony formation and thymidine uptake in L929 cells and those of Thuja, Hydrastis and Carcinosinum were found to induce apoptosis in DLA cells. Moreover, dynamized Carcinosinum was found to induce the expression of p53 while dynamized Thuja produced characteristic laddering pattern in agarose gel electrophoresis of DNA. These results indicate that dynamized medicines possess cytotoxic as well as apoptosis-inducing properties.

  1. Electrocatalysts Prepared by Galvanic Replacement

    Directory of Open Access Journals (Sweden)

    Athanasios Papaderakis

    2017-03-01

    Full Text Available Galvanic replacement is the spontaneous replacement of surface layers of a metal, M, by a more noble metal, Mnoble, when the former is treated with a solution containing the latter in ionic form, according to the general replacement reaction: nM + mMnoblen+ → nMm+ + mMnoble. The reaction is driven by the difference in the equilibrium potential of the two metal/metal ion redox couples and, to avoid parasitic cathodic processes such as oxygen reduction and (in some cases hydrogen evolution too, both oxygen levels and the pH must be optimized. The resulting bimetallic material can in principle have a Mnoble-rich shell and M-rich core (denoted as Mnoble(M leading to a possible decrease in noble metal loading and the modification of its properties by the underlying metal M. This paper reviews a number of bimetallic or ternary electrocatalytic materials prepared by galvanic replacement for fuel cell, electrolysis and electrosynthesis reactions. These include oxygen reduction, methanol, formic acid and ethanol oxidation, hydrogen evolution and oxidation, oxygen evolution, borohydride oxidation, and halide reduction. Methods for depositing the precursor metal M on the support material (electrodeposition, electroless deposition, photodeposition as well as the various options for the support are also reviewed.

  2. CMS prepares for new challenges

    CERN Multimedia

    Antonella Del Rosso

    2014-01-01

    One of the world’s largest physics experiments has just had a change in leadership. This is a chance for the collaboration to take stock of the tremendous work done for LS1 and to prepare for the challenges that lie ahead.   From left to right: Kerstin Borras, Tiziano Camporesi and Paris Sphicas. “The keyword is teamwork. That’s the only way you can effectively manage a large number of extremely talented and motivated people,” says Tiziano Camporesi who took the reins of the CMS collaboration at the beginning of the year. The recipe might seem easier on paper than in practice. However, given his 28 years at CERN, two of which he spent as the head of the DELPHI collaboration, Camporesi has extensive experience in managing large scientific collaborations and success in this respect is well within his reach: “I have learned many lessons from the past and I believe that building consensus is instrumental to successful leadership.” The C...

  3. Personality Development during Teacher Preparation.

    Science.gov (United States)

    Corcoran, Roisin P; O'Flaherty, Joanne

    2016-01-01

    Objective: The purpose of this 3-year longitudinal study was to examine pre-service teachers' personality trajectories as measured by the IPIP Big-Five factor markers during teacher preparation. The relationship between students' personality traits, social desirability, and prior academic attainment was also examined. Method: This 3-year longitudinal study invited participants from the first year of a 4-year undergraduate (UG) pre-service teacher education program, the class of 2017. The sample consisted of 305 students. Results: The results suggest that extraversion, agreeableness, conscientiousness, emotional stability, and openness to experience were best represented by a non-significant longitudinal change in means. Results also suggest that social desirability predicts agreeableness and emotional stability with small to moderate effect sizes. Conclusion: The study concludes that no value is added to pre-service teachers' personality traits during 3 years of tertiary education. Furthermore, the data presented does not support the view that academic attainment is a good predictor of personality traits. Implications for educational research, theory, and practice are considered.

  4. [Sample preparation and bioanalysis in mass spectrometry].

    Science.gov (United States)

    Bourgogne, Emmanuel; Wagner, Michel

    2015-01-01

    The quantitative analysis of compounds of clinical interest of low molecular weight (sample preparation. Sample preparation is a crucial part of chemical/biological analysis and in a sense is considered the bottleneck of the whole analytical process. The main objectives of sample preparation are the removal of potential interferences, analyte preconcentration, and converting (if needed) the analyte into a more suitable form for detection or separation. Without chromatographic separation, endogenous compounds, co-eluted products may affect a quantitative method in mass spectrometry performance. This work focuses on three distinct parts. First, quantitative bioanalysis will be defined, different matrices and sample preparation techniques currently used in bioanalysis by mass spectrometry of/for small molecules of clinical interest in biological fluids. In a second step the goals of sample preparation will be described. Finally, in a third step, sample preparation strategies will be made either directly ("dilute and shoot") or after precipitation.

  5. Monitoring radiolabelled antacid preparations in the stomach

    International Nuclear Information System (INIS)

    May, H.A.; Wilson, C.G.; Hardy, J.G.

    1984-01-01

    Radiolabelled antacid preparations have been monitored in the stomach using gamma scintigraphy. The stomach contents were labelled with technetium-99m and two antacid preparations with indium-113m. It has been shown that the antacid containing aluminium hydroxide and magnesium oxide mixed and emptied with the other stomach contents. An alginate containing preparation tended to float on the food and emptied only slowly from the stomach. (Auth.)

  6. Laboratory evaluation of commercial interferon preparations

    International Nuclear Information System (INIS)

    Schoub, B.D.; Lyons, S.F.; Crespi, M.; Chiu, M.-N.; Lomnitzer, R.

    1983-01-01

    The antiviral, antiproliferative and natural killer-cell (NKC) stimulatory activities of four commercial therapeutic interferon preparations were assayed in a laboratory. The antiviral and antiproliferative activities of each preparation were relatively similar, but an unexpectedly high NKC stimulatory activity was found in one of them. In-house determination of antiviral activity and evaluation of the antiproliferative and NKC stimulation potential of interferon preparations are essential before rational clinical trials of this agent are carried out

  7. [Support and tools for preparing for birth].

    Science.gov (United States)

    Bouychou, Mathilde; Sallez, Hélène; de Brito, Gina; Mouilti, Yamina; Piquée, Nathalie; Boyé, Hélène

    There are a thousand and one ways of preparing to be a parent. Specific support is offered to pregnant women or the couple in order to take the time to prepare for this personal transformation. Haptonomy, sophrology, shiatsu and massage, acupuncture or gestalt therapy are some of the methods helping parents to prepare to welcome their future child with peace of mind. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  8. Preparing for the extension conference of 1995

    International Nuclear Information System (INIS)

    Sanders, B.

    1993-01-01

    This paper is intended to address the preparation process that must precede the conference to be held early in 1995 with intention to decide how long the Treaty on the Non-proliferation of Nuclear Weapons will be extended. The importance of preparation is pointed out. The time has come for every Government interested in the Treaty to take a new look at the issues that will play a role at the Conference and prepare the positions they will adopt

  9. METALLOGRAPHIC SAMPLE PREPARATION STATION-CONSTRUCTIVE CONCEPT

    Directory of Open Access Journals (Sweden)

    AVRAM Florin Timotei

    2016-11-01

    Full Text Available In this paper we propose to present the issues involved in the case of the constructive conception of a station for metallographic sample preparation. This station is destined for laboratory work. The metallographic station is composed of a robot ABB IRB1600, a metallographic microscope, a gripping device, a manipulator, a laboratory grinding and polishing machine. The robot will be used for manipulation of the sample preparation and the manipulator take the sample preparation for processing.

  10. [Medicinal preparations in Mattioli's herbarium of 1596].

    Science.gov (United States)

    Drabek, P

    2008-06-01

    Herbaria in the 16th century very often included also the information concerning the use of medicinal plants in practice. The second Czech edition of Mattioli's Herbarium presented about 4000 pieces of therapeutic advice and instructions, including nearly 200 complete prescriptions for medicinal preparations. Preparations for internal use were mainly potions and concoctions. In preparations for external administration, the dosage was not of great importance and therefore less attention was paid to their precise composition. At that period, distillation was still widely used to prepare medicaments.

  11. STRUCTURAL ANALYSIS OF CONDITIONAL PREPARATION IN JUDO

    Directory of Open Access Journals (Sweden)

    Slavko Obadov

    2006-06-01

    Full Text Available Conditional preparation is a constituent part of overall sports preparation. Conditional training might be defined as a process of improvement of a sportsman’s functional and motor abilities, morphological characteristics, health, as well as the required motor knowledge. Conditional preparation can be might be classified as: general, basic and situational conditional preparation. Programs of the conditional training might be classified as: developing, resuming, recovering, preventive and recovering ones. High level of the general physical preparation enables maximum demonstration of the physical abilities of a sportsman during the stage of improvement of the specific motor abilities. Good general preparation of a sportsman enables him to push beyond his functional limits in order to cope with heavy loads easier, which subsequently enables him to achieve top performance level. Basic conditional preparation assumes the development of the most important judo abilities. Specific conditional preparation is related directly to the execution of different structural elements under the conditional requirements. Situational conditional preparation enables integration of the tactical and conditional training.

  12. Remote Preparation of an Atomic Quantum Memory

    International Nuclear Information System (INIS)

    Rosenfeld, Wenjamin; Berner, Stefan; Volz, Juergen; Weber, Markus; Weinfurter, Harald

    2007-01-01

    Storage and distribution of quantum information are key elements of quantum information processing and future quantum communication networks. Here, using atom-photon entanglement as the main physical resource, we experimentally demonstrate the preparation of a distant atomic quantum memory. Applying a quantum teleportation protocol on a locally prepared state of a photonic qubit, we realized this so-called remote state preparation on a single, optically trapped 87 Rb atom. We evaluated the performance of this scheme by the full tomography of the prepared atomic state, reaching an average fidelity of 82%

  13. Fuels Preparation Department monthly report, May 1958

    Energy Technology Data Exchange (ETDEWEB)

    1958-06-17

    This report describes the operation of the fuels preparation department for the month of May, 1958. Manufacturing employee relations, process development, plant improvements, and financial operations are discussed.

  14. Cognitive Readiness: Preparing for the Unexpected

    National Research Council Canada - National Science Library

    Fletcher, J. D

    2004-01-01

    .... Anticipated operational requirements can be decomposed into specific tasks, conditions, and standards, but how should individuals, teams, and units prepare for the unexpected, which, by definition...

  15. Preparing Soil for Turfgrass Establishment - Southern Utah

    OpenAIRE

    Caron, Michael; Schaible, Candace; Heflebower, Rick; Cardon, Grant; Beddes, Taun; Kopp, Kelly

    2017-01-01

    This fact sheet provides information for successfully establishing a lawn including planning, soil preparation, appropriate seed or sod choice, and an understanding of turfgrass requirements in southern Utah.

  16. Proceedings. Feedstock preparation and quality 1997 workshop

    Energy Technology Data Exchange (ETDEWEB)

    Mattsson, Jan Erik [ed.

    1998-06-01

    The IEA Bioenergy Feedstock Preparation and Quality 1997 Workshop dealt with fuel feedstock quality improvement and methods to determine feedstock properties. It was arranged by the Swedish Univ. of Agricultural Sciences on behalf of the IEA Bioenergy Task XII Activity 4.1 Feedstock Preparation and Quality. This Activity is a 3-year cooperation 1995-1997 between Denmark, Sweden and the USA, mainly based on information exchange. The workshop had two sections: presentations by invited experts, and country reports on recent development in feedstock preparation and quality in the three participating countries. Separate abstracts have been prepared for four of the six papers presented

  17. Operating Room Fires and Surgical Skin Preparation.

    Science.gov (United States)

    Jones, Edward L; Overbey, Douglas M; Chapman, Brandon C; Jones, Teresa S; Hilton, Sarah A; Moore, John T; Robinson, Thomas N

    2017-07-01

    Operating room fires are "never events" that remain an under-reported source of devastating complications. One common set-up that promotes fires is the use of surgical skin preparations combined with electrosurgery and oxygen. Limited data exist examining the incidence of fires and surgical skin preparations. A standardized, ex vivo model was created with a 15 × 15 cm section of clipped porcine skin. An electrosurgical "Bovie" pencil was activated for 2 seconds on 30 Watts coagulation mode in 21% oxygen (room air), both immediately and 3 minutes after skin preparation application. Skin preparations with and without alcohol were tested, and were applied with and without pooling. Alcohol-based skin preparations included 70% isopropyl alcohol (IPA) with 2% chlorhexidine gluconate, 74% IPA with 0.7% iodine povacrylex, and plain 70% IPA. No fires occurred with nonalcohol-based preparations (p fires occurred in 38% (23 of 60) at 0 minutes and 27% (16 of 60) at 3 minutes. Alcohol-based skin preparations fuel operating room fires in common clinical scenarios. Following manufacturer guidelines and allowing 3 minutes for drying, surgical fires were still created in 1 in 10 cases without pooling and more than one-quarter of cases with pooling. Surgeons can decrease the risk of an operating room fire by using nonalcohol-based skin preparations or avoiding pooling of the preparation solution. Published by Elsevier Inc.

  18. Preparing nurse leaders for 2020.

    Science.gov (United States)

    Huston, Carol

    2008-11-01

    This article highlights eight leadership competencies likely to be an essential part of the nurse leader's repertoire in 2020. Planning for the future is difficult, even when environments are relatively static. When environments are dynamic, the challenges multiply exponentially. Unfortunately, few environments have been more unpredictable in the 21st century than health care. The healthcare system is in chaos, as is much of the business world. It is critical then that contemporary nursing and healthcare leaders identify skill sets that will be needed by nurse leaders in 2020 and begin now to create the educational models and management development programs necessary to assure these skills are present. Essential nurse leader competencies for 2020 include: (i) A global perspective or mindset regarding healthcare and professional nursing issues. (ii) Technology skills which facilitate mobility and portability of relationships, interactions, and operational processes. (iii) Expert decision-making skills rooted in empirical science. (iv) The ability to create organization cultures that permeate quality healthcare and patient/worker safety. (v) Understanding and appropriately intervening in political processes. (vi) Highly developed collaborative and team building skills. (vii) The ability to balance authenticity and performance expectations. (viii) Being able to envision and proactively adapt to a healthcare system characterized by rapid change and chaos. Nursing education programmes and healthcare organizations must be begin now to prepare nurses to be effective leaders in 2020. This will require the formal education and training that are a part of most management development programmes as well as a development of appropriate attitudes through social learning. Proactive succession planning will also be key to having nurse leaders who can respond effectively to the new challenges and opportunities that will be presented to them in 2020.

  19. Preparation, mechanical strengths, and thermal

    Science.gov (United States)

    Inoue, A.; Furukawa, S.; Hagiwara, M.; Masumoto, T.

    1987-05-01

    Ni-based amorphous wires with good bending ductility have been prepared for Ni75Si8B17 and Ni78P12B10 alloys containing 1 to 2 at. pct Al or Zr by melt spinning in rotating water. The enhancement of the wire-formation tendency by the addition of Al has been clarified to be due to the increase in the stability of the melt jet through the formation of a thin A12O3 film on the outer surface. The maximum wire diameter is about 190 to 200 μm for the Ni-Si (or P)-B-Al alloys and increases to about 250 μm for the Ni-Si-B-Al-Cr alloys containing 4 to 6 at. pct Cr. The tensile fracture strength and fracture elongation are 2730 MPa and 2.9 pct for (Ni0.75Si0.08B0.17 99Al1) wire and 2170 MPa and 2.4 pct for (Ni0.78P0.12B0.1)99Al1 wire. These wires exhibit a fatigue limit under dynamic bending strain in air with a relative humidity of 65 pct; this limit is 0.50 pct for a Ni-Si-B-Al wire, which is higher by 0.15 pct than that of a Fe75Si10B15 amorphous wire. Furthermore, the Ni-base wires do not fracture during a 180-deg bending even for a sample annealed at temperatures just below the crystallization temperature, in sharp contrast to high embrittlement tendency for Fe-base amorphous alloys. Thus, the Ni-based amorphous wires have been shown to be an attractive material similar to Fe- and Co-based amorphous wires because of its high static and dynamic strength, high ductility, high stability to thermal embrittlement, and good corrosion resistance.

  20. Firewood preparation devices in 1994

    International Nuclear Information System (INIS)

    Mutikainen, A.

    1994-01-01

    A review of the market situation regarding firewood preparation devices is presented. The information was collected from the answers to a mail questionnaire. The review is assumed to include all the leading manufacturers and importers. Firewood production devices were available from 26 manufacturers. The range of models amounted to over 70. These may be divided into three categories: 1. cutting devices: the most common solution being a cross-cutting circular saw. There were only a few of these on sale as it is quite easy to include a splitting device on the same frame. 2. Splitting devices: e.g. screw splitter and hydraulically powered splitter. About 20 models are available on the markets. Cross cutting and splitting devices: these are the most popular devices. A cross-cutting circular saw with screw or hydraulic splitter is the most common type. There are about 50 models available on the markets. Cross-cutting and splitting devices are often equipped with conveyor for transferring the split wood e.g. into a trailer. Chopping devices are delivered as tractor powered devices, as electric motor powered devices or as combustion engine powered devices. Some of them are equipped with a time saving feeding device enabling the next stem to be lifted into position while the previous one is being chopped. The Finnish Work Efficiency Institute's studies show that when cross-cutting and splitting of stems into pieces of 35-50 cm in length, productivity for one operator varies in between 0.8 - 3.2 m 3 /h, depending on the device and work method used. (6 refs., 1 fig., 2 tabs.)

  1. Radiochemical stability of radiopharmaceutical preparations

    International Nuclear Information System (INIS)

    Martins, Patricia de A.; Silva, Jose L. da; Ramos, Marcelo P.S.; Oliveira, Ideli M. de; Felgueiras, Carlos F.; Herrerias, Rosana; Zapparoli Junior, Carlos L.; Mengatti, Jair; Fukumori, Neuza T.O.; Matsuda, Margareth M.N.

    2011-01-01

    The 'in vitro' stability studies of the radiopharmaceutical preparations are an essential requirement for routine practice in nuclear medicine and are an important parameter for evaluating the quality, safety and efficacy required for the sanitary registration of pharmaceutical products. Several countries have published guidelines for the evaluation of pharmaceutical stability. In Brazil, the stability studies should be conducted according to the Guide for Conducting Stability Studies published in the Resolution-RE n. 1, of 29th July 2005. There are also for radiopharmaceutical products, two specific resolutions: RDC-63 regulates the Good Manufacturing Practices for Radiopharmaceuticals and RDC-64 provides the Registration of Radiopharmaceuticals, both published on the 18th December 2009. The radiopharmaceutical stability is defined as the time during which the radioisotope can be safely used for the intended purpose. The radiochemical stability can be affected by a variety of factors, including storage temperature, amount of radioactivity, radioactive concentration, presence or absence of antioxidants or other stabilizing agents. The radiochemical stability studies must be established under controlled conditions determined by the effective use of the product. The aim of this work was to evaluate the radiochemical stability of labeled molecules with 131 I, 123 I, 153 Sm, 18 F, 51 Cr, 177 Lu and 111 In as well as 67 Ga and 201 Tl radiopharmaceuticals. Radiochemical purity was evaluated after production and in the validity period, with the maximum activity and in the recommended storage conditions. The analyses were carried out by thin-layer silica gel plate, paper chromatography and gel chromatography. The experimental results showed to be in accordance with the specified limits for all the analysed products. (author)

  2. Emergency situations in SMEs : Are entrepreneurs prepared?

    NARCIS (Netherlands)

    Kleijn, E.; Montfort, van K.; Masurel, E.

    2012-01-01

    The article examines how entrepreneurs prepare for emergency situations in small and medium-sized enterprises (SMEs) in the Netherlands. It identifies the characteristics of SMEs and the theory related to emergency situations and the preparations for such situations. It also provides a detailed

  3. 21 CFR 113.81 - Product preparation.

    Science.gov (United States)

    2010-04-01

    ...) Blanching by heat, when required in the preparation of food for canning, should be effected by heating the... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Product preparation. 113.81 Section 113.81 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  4. Preparation of carbon-14-labelled gallic acid

    International Nuclear Information System (INIS)

    Kozak, I.; Prochazka, M.

    1977-01-01

    Gallic acid labelled with 14 C was prepared for the needs of biological studies. A lithium derivative of trimethoxybenzene was treated with 14 CO 2 and then demethylated to yeld [carboxyl- 14 C]gallic acid. The preparation scheme and the individual steps of the synthesis are described in detail

  5. Preparation of eugenol-based polyurethane

    Science.gov (United States)

    Li, Yupeng; Luo, Fang; Cheng, Chuanjie

    2018-03-01

    The regenerative eugenol was used as the starting material to prepare diol species by two steps, with a total yield of 28%. Furthermore, the prepared diol reacts with 1,6-hexadiisocyanate(HDI) to afford the corresponding polyurethane (PU). The structure of intermediates and PU are characterized by 1H-NMR or IR.

  6. Quantitative sample preparation of some heavy elements

    International Nuclear Information System (INIS)

    Jaffey, A.H.

    1977-01-01

    A discussion is given of some techniques that have been useful in quantitatively preparing and analyzing samples used in the half-life determinations of some plutonium and uranium isotopes. Application of these methods to the preparation of uranium and plutonium samples used in neutron experiments is discussed

  7. Preparing Instructional Objectives: Agony or Ecstasy?

    Science.gov (United States)

    Roberts, Wesley K.

    This paper 1) discusses the problems encountered in preparing objectives for instructional programs; 2) describes an informal research project in which seven instructional designers working on the same project attempted to determine agreement on an objective; and 3) suggests how to prepare objectives so that difficulties can be minimized. One…

  8. Modular microfluidic system for biological sample preparation

    Science.gov (United States)

    Rose, Klint A.; Mariella, Jr., Raymond P.; Bailey, Christopher G.; Ness, Kevin Dean

    2015-09-29

    A reconfigurable modular microfluidic system for preparation of a biological sample including a series of reconfigurable modules for automated sample preparation adapted to selectively include a) a microfluidic acoustic focusing filter module, b) a dielectrophoresis bacteria filter module, c) a dielectrophoresis virus filter module, d) an isotachophoresis nucleic acid filter module, e) a lyses module, and f) an isotachophoresis-based nucleic acid filter.

  9. Preparation of Spirocyclic β-Proline Esters

    DEFF Research Database (Denmark)

    Fjelbye, Kasper; Marigo, Mauro; Clausen, Rasmus Prætorius

    2017-01-01

    A series of novel N-Bn-protected spirocyclic β-proline esters were prepared using [3+2] cycloaddition and subsequently converted into their corresponding aldehydes. In addition, two novel N-Cbz-protected spirocyclic β-proline esters were prepared using intramolecular cyclization starting from...

  10. Guidelines for preparing IAEA design information questionnaires

    International Nuclear Information System (INIS)

    Swartz, J.M.; Bieber, A.M.

    1980-01-01

    The format of the IAEA Design Information Questionnaires and the SAI prepared guidelines for completing them, is described. The guidelines should assist facility operators in meeting the time constraints set forth in the Subsidiary Arrangements by effectively supplying the information needed by the IAEA and in minimizing resource allocations to the preparation effort. 8 refs

  11. Preparation and Optimization of Esomeprazole Nanosuspension ...

    African Journals Online (AJOL)

    Purpose: To prepare and optimize esomeprazole nanosuspension to enhance drug dissolution rate. Methods: Esomeprazole nanosuspensions were prepared by evaporative precipitation-ultrasonication method using F68 (Poloxamer 188) and F127 (Poloxamer 407) as stabilizers. Formulation and process variables ...

  12. Preparing for the SAT: A Review

    Science.gov (United States)

    Appelrouth, Jed I.; Zabrucky, Karen M.

    2017-01-01

    In 2016, more than 1.6 million students took the Scholastic Aptitude Test (SAT), a standardized college admissions test (College Board 2016a). Researchers have estimated that 33 percent of students who take the SAT participate in some mode of formal test preparation, such as private tutoring or classes, to prepare for the exam (Buchmann, Condron…

  13. Dissipative preparation of entanglement in optical cavities

    DEFF Research Database (Denmark)

    Kastoryano, Michael James; Reiter, Florentin; Sørensen, Anders Søndberg

    2011-01-01

    We propose a novel scheme for the preparation of a maximally entangled state of two atoms in an optical cavity. Starting from an arbitrary initial state, a singlet state is prepared as the unique fixed point of a dissipative quantum dynamical process. In our scheme, cavity decay is no longer...

  14. 21 CFR 864.4400 - Enzyme preparations.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Enzyme preparations. 864.4400 Section 864.4400 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4400 Enzyme...

  15. Methods for preparation of deuterated amino acids

    International Nuclear Information System (INIS)

    Pshenichnikova, A.B.; Karnaukhova, E.N.; Zvonkova, E.N.

    1995-01-01

    The current state and prospects for the use of amino acids labeled with stable isotopes are considered. Methods for the preparation of deuterated amino acids, including synthetic, chemicoenzymatic, and biosynthetic ones, and deuterium exchange reactions are summarized. Problems in the preparation of optically pure amino acids are discussed. 120 refs., 15 figs

  16. 12 CFR 917.8 - Budget preparation.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Budget preparation. 917.8 Section 917.8 Banks... POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.8 Budget preparation. (a) Adoption of budgets. Each Bank's board of directors shall be responsible for the adoption of an...

  17. Preparation and characterisation of chitosan from Penicillium ...

    African Journals Online (AJOL)

    This work investigated the removal efficiency of Congo red dye (CRD) from aqueous solution using chitosan prepared from the biomass of Penicillium chrysogenum Thom. CRD is a benzidine - based anionic diazo dye known to be carcinogenic at low concentration. Chitosan was prepared from the mycelium of P.

  18. Preparation of 147Pm ceramic source core

    International Nuclear Information System (INIS)

    Mielcarski, M.

    1989-01-01

    Preparation of ceramic pellets containing fixed promethium-147 is described. Incorporation rate of 147 Pm into the ceramic material was determined. The leachability and vaporization of promethium from the obtained ceramics was investigated. The ceramic pellets prepared by the described procedure, mounted in special holders, can be applied as point sources in beta backscatter thickness gauges. (author)

  19. 7 CFR 160.89 - Medicinal preparations.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Medicinal preparations. 160.89 Section 160.89... STANDARDS FOR NAVAL STORES Sales and Shipments § 160.89 Medicinal preparations. A compound or mixture containing spirits of turpentine or rosin, or both, with other drugs, when sold for medicinal purposes, is...

  20. 46 CFR Sec. 3 - Preparation of invoices.

    Science.gov (United States)

    2010-10-01

    ... NSA ORDER NO. 47 Sec. 3 Preparation of invoices. (a) Pursuant to Article 4 of the Service Agreement... under the applicable provisions of NSA Order No. 47. (1) Invoices shall be prepared so as to show... provisions of NSA Order No. 47 due the undersigned General Agent for the month of _____ under Service...

  1. A study on the performance advancement of teat algorithm for defects in semiconductor packages

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Yeol; Kim, Chang Hyun; Yang, Dong Jo; Ko, Myung Soo [Chosun University, Gwangju (Korea, Republic of); You, Sin [Computer Added Mechanical Engineering, Mokpo Science College, Mokpo (Korea, Republic of)

    2002-11-15

    In this study, researchers classifying the artificial flaws in semiconductor packages are performed by pattern recognition technology. For this purposes, image pattern recognition package including the user made software was developed and total procedure including ultrasonic image acquisition, equalization filtration, binary process, edge detection and classifier design is treated by Backpropagation Neural Network. Specially, it is compared with various weights of Backpropagation Neural Network and it is compared with threshold level of edge detection in preprocessing method for entrance into Multi-Layer Perceptron(Backpropagation Neural network). Also, tile pattern recognition techniques is applied to the classification problem of defects in semiconductor packages as normal, crack, delamination. According to this results, it is possible to acquire the recognition rate of 100% for Backpropagation Neural Network.

  2. Reduction of forces on the teats by single tube guiding in ...

    African Journals Online (AJOL)

    Udder health considerably affects the economics of dairy farming. There are different reasons for poor udder health; one of them is the milking technique. In earlier studies it was shown that automatic milking systems (AMS) have advantages over conventional milking systems (CMS). Quarter individual milking and ...

  3. Ganoderma Lucidum Pharmacopuncture for Teating Ethanol-induced Chronic Gastric Ulcers in Rats

    Directory of Open Access Journals (Sweden)

    Jae-Heung Park

    2015-03-01

    Full Text Available Objectives: The stomach is a sensitive digestive organ that is susceptible to exogenous pathogens from the diet. In response to such pathogens, the stomach induces oxidative stress, which might be related to the development of both gastric organic disorders such as gastritis, gastric ulcers, and gastric cancer, and functional disorders such as functional dyspepsia. This study was accomplished to investigate the effect of Ganoderma lucidum pharmacopuncture (GLP on chronic gastric ulcers in rats. Methods: The rats were divided into 4 groups of 8 animals each: the normal, the control, the normal saline (NP and the GLP groups. In this study, the modified ethanol gastritis model was used. The rats were administrated 56% ethanol orally every other day. The dose of ethanol was 8 g/kg body weight. The normal group received the same amount of normal saline instead of ethanol. The NP and the GLP groups were treated with injection of saline and GLP respectively. The control group received no treatment. Two local acupoints CV12 (中脘 and ST36 (足三里 were used. All laboratory rats underwent treatment for 15 days. On last day, the rats were sacrificed and their stomachs were immediately excised. Results: Ulcers of the gastric mucosa appeared as elongated bands of hemorrhagic lesions parallel to the long axis of the stomach. In the NP and GLP groups, the injuries to the gastric mucosal injuries were not as severe as they were in the control group. Wound healings of the chronic gastric ulcers was promoted by using GLP and significant alterations of the indices in the gastric mucosa were observed. Such protection was demonstrated by gross appearance, histology and immunehistochemistry staining for Bcl-2-associated X (BAX, B-cell lymphoma 2 (Bcl-2 and Transforming growth factor-beta 1 (TGF-β1. Conclusion: These results suggest that GLP at CV12 and ST36 can provide significant protection to the gastric mucosa against an ethanol induced chronic gastric ulcer.

  4. Effects of hunger level and tube diameter on thefeeding behavior of teat-fed dairy calves

    DEFF Research Database (Denmark)

    Herskin, Mette S; Skjøth, Flemming; Jensen, Margit Bak

    2010-01-01

    Behavioral changes caused by variation in hunger have a great potential in health monitoring in dairy cattle. The present experiment used 48 Danish Holstein bull calves with a median age of 33 d. We examined the effect of different levels of hunger (reduced, in which calves were fed 1.5 L of milk...... via esophageal tube before feeding; increased, in which calves were fed half milk ration at the previous feeding, or control, in which calves were fed normal ration at the previous feeding) on feeding behavior of calves fed via different tube diameters (6.0, 3.0, or 1.5 mm). Behavior observed during...... levels. The present results show that only a rather high reduction in tube diameter led to reduced drinking rate. Neither reduced nor increased hunger levels led to changes in drinking rate, but calves showed reduced nonnutritive sucking and butting when they were less hungry and increased nonnutritive...

  5. Leedu lükkas tagasi teate suundumisest piraadijahile / Evelyn Kaldoja

    Index Scriptorium Estoniae

    Kaldoja, Evelyn, 1980-

    2008-01-01

    Leedulaste seas põhjustas hämmingut Euroopa Liidu eesistuja Prantsusmaa kaitseministri Herve Morini teade, et ka Leedu merevägi tahab osaleda piraatlusevastasel operatsioonil Somaalia rannikul. Vt. samas: Kaaperdatud laev

  6. Oromucosal film preparations: classification and characterization methods.

    Science.gov (United States)

    Preis, Maren; Woertz, Christina; Kleinebudde, Peter; Breitkreutz, Jörg

    2013-09-01

    Recently, the regulatory authorities have enlarged the variety of 'oromucosal preparations' by buccal films and orodispersible films. Various film preparations have entered the market and pharmacopoeias. Due to the novelty of the official monographs, no standardized characterization methods and quality specifications are included. This review reports the methods of choice to characterize oromucosal film preparations with respect to biorelevant characterization and quality control. Commonly used dissolution tests for other dosage forms are not transferable for films in all cases. Alternatives and guidance on decision, which methods are favorable for film preparations are discussed. Furthermore, issues about requirements for film dosage forms are reflected. Oromucosal film preparations offer a wide spectrum of opportunities. There are a lot of suggestions in the literature on how to control the quality of these innovative products, but no standardized tests are available. Regulatory authorities need to define the standards and quality requirements more precisely.

  7. An outbreak of acute bovine mastitis caused by Klebsiella pneumoniae in a dairy herd

    Directory of Open Access Journals (Sweden)

    Silva N.

    2001-01-01

    Full Text Available An outbreak of coliform mastitis is described in a dairy herd from the State of Rio de Janeiro, Brazil. During a four-month period 14 fatal cases of Klebsiella pneumoniae-related mastitis were observed in a herd of 104 lactating cows. The symptoms included peracute enterotoxemia in which the cows died 6 to 12 h after the detection of mastitis by CMT. Staphylococcus aureus and Streptococcus agalactiae Streptococcus agalactiae were also isolated although could not be associated with cases of acute fatal mastitis. Milking practices were also evaluated. The milking machine was being used correctly and adequate precautions for hygiene and pre-milking and post-milking teat dipping were used. The organism was sensitive to gentamicin. Therapy for acute toxic mastitis required early action for the treatment of infections, involving corticosteroids and fluid therapy. The use of a Klebsiella vaccine produced from the microorganisms isolated from the herd, associated with hygiene measures, resulted in the control of the outbreak.

  8. Coagulase-negative Staphylococcus species in bulk milk: Prevalence, distribution, and associated subgroup- and species-specific risk factors.

    Science.gov (United States)

    De Visscher, A; Piepers, S; Haesebrouck, F; Supré, K; De Vliegher, S

    2017-01-01

    Coagulase-negative staphylococci (CNS) have become the main pathogens causing bovine mastitis in recent years. A huge variation in species distribution among herds has been observed in several studies, emphasizing the need to identify subgroup- and species-specific herd-level factors to improve our understanding of the differences in ecological and epidemiological nature between species. The use of bulk milk samples enables the inclusion of a large(r) number of herds needed to identify herd-level risk factors and increases the likelihood of recovering enough isolates per species needed for conducting subgroup- and, eventually, species-specific analyses at the same time. This study aimed to describe the prevalence and distribution of CNS species in bulk milk samples and to identify associated subgroup- and species-specific herd-level factors. Ninety percent of all bulk milk samples yielded CNS. Staphylococcus equorum was the predominant species, followed by Staphylococcus haemolyticus and Staphylococcus epidermidis. A seasonal effect was observed for several CNS species. Bulk milk samples from herds with a loose-pack or a tiestall housing system were more likely to yield CNS species compared with herds with a freestall barn, except for S. epidermidis, Staphylococcus simulans, and Staphylococcus cohnii. In September, herds in which udders were clipped had lower odds of yielding Staphylococcus chromogenes, S. simulans, and Staphylococcus xylosus, the CNS species assumed to be most relevant for udder health, in their bulk milk than herds in which udder clipping was not practiced. Bulk milk of herds participating in a monthly veterinary udder health-monitoring program was more likely to yield these 3 CNS species. Herds always receiving their milk quality premium or predisinfecting teats before attachment of the milking cluster had lower odds of having S. equorum in their bulk milk. Herds not using a single dry cotton or paper towel for each cow during premilking udder

  9. Everyday meal preparation for people with dementia

    DEFF Research Database (Denmark)

    Iversen, Mette Kathrine Friis; Nejsum, Hanne Lindberg; Bendtsen, Trine Vase

    When people are diagnosed with dementia everyday activities like meal preparation will gradually become more difficult. A recipe is a support for meal preparation but as dementia develops, it seems that following a recipe can be a challenge. In Denmark health professionals often use meal preparat......When people are diagnosed with dementia everyday activities like meal preparation will gradually become more difficult. A recipe is a support for meal preparation but as dementia develops, it seems that following a recipe can be a challenge. In Denmark health professionals often use meal...... preparation as an activity for people with dementia but they have no combined material to base the planning of the activity on. The thesis of this project is that when persons with dementia is involved in cooking his or her own meal meal preparation it will contribute to the feeling of content and meaning...... preparation. The guide includes ideas for constructing recipes, methods for planning and guiding the process and examples of utensils that can increase the ability to cook in the persons own home or in an institutionalized setting. This supports the person with dementia both nutritionally, cognitively...

  10. Preparation of naphtalene monocrystals for scintillometers

    International Nuclear Information System (INIS)

    Gaeta, R.

    1959-01-01

    A method to prepare naphthalene crystals for scintillometers is described. The different methods of preparation and the reasons to choose the Bridgman method are analysed. The thermal curves of the growing furnaces, blister shape, use of curved capillaries and the most convenient growing velocities are studied in detail. Methods of preparation of high purity naphthalene by means of chromatography and zone melting are described. Finally the operations of cutting and polishing of crystal and their most significant physics properties are studied. (Author) 28 refs

  11. Newly introduced sample preparation techniques: towards miniaturization.

    Science.gov (United States)

    Costa, Rosaria

    2014-01-01

    Sampling and sample preparation are of crucial importance in an analytical procedure, representing quite often a source of errors. The technique chosen for the isolation of analytes greatly affects the success of a chemical determination. On the other hand, growing concerns about environmental and human safety, along with the introduction of international regulations for quality control, have moved the interest of scientists towards specific needs. Newly introduced sample preparation techniques are challenged to meet new criteria: (i) miniaturization, (ii) higher sensitivity and selectivity, and (iii) automation. In this survey, the most recent techniques introduced in the field of sample preparation will be described and discussed, along with many examples of applications.

  12. Preparation of high-purity cerium nitrate

    International Nuclear Information System (INIS)

    Avila, Daniela Moraes; Silva Queiroz, Carlos Alberto da; Santos Mucillo, Eliana Navarro dos

    1995-01-01

    The preparation of high-purity cerium nitrate has been carried out Cerium oxide has been prepared by fractioned precipitation and ionic exchange techniques, using a concentrate with approximately 85% of cerium oxide from NUCLEMON as raw material. Five sequential ion-exchange columns with a retention capacity of 170 g each have been used. The ethylenediamine-tetraacetic acid (EDTA) was used as eluent. The cerium content has been determined by gravimetry and iodometry techniques. The resulting cerium oxide has a purity > 99%. This material was transformed in cerium nitrate to be used as precursor for the preparation of Zirconia-ceria ceramics by the coprecipitation technique. (author)

  13. Studies on the Preparation of Magnetic Photocatalysts

    International Nuclear Information System (INIS)

    Watson, S.; Scott, J.; Beydoun, D.; Amal, R.

    2005-01-01

    A crystalline titanium dioxide coating was deposited onto silica insulated magnetite particles to prepare a stable magnetic photocatalyst. The direct deposition of crystalline titanium dioxide was conducted by aging dispersions of insulated magnetite particles in a titanium sol-gel precursor mixture at 60-90 deg. C. The coating process was found to be influenced by pH, alkoxide precursor concentration, aging time and reaction temperature. A mechanism for the formation of the titanium dioxide coating has been proposed. The photocatalytic performance of the prepared particles was found to be related to the preparation conditions

  14. Relative costs of anesthesiologist prepared, hospital pharmacy prepared and outsourced anesthesia drugs.

    Science.gov (United States)

    Jelacic, Srdjan; Craddick, Karen; Nair, Bala G; Bounthavong, Mark; Yeung, Kai; Kusulos, Dolly; Knutson, Jennifer A; Somani, Shabir; Bowdle, Andrew

    2017-02-01

    Anesthesia drugs can be prepared by anesthesia providers, hospital pharmacies or outsourcing facilities. The decision whether to outsource all or some anesthesia drugs is challenging since the costs associated with different anesthesia drug preparation methods remain poorly described. The costs associated with preparation of 8 commonly used anesthesia drugs were analyzed using a budget impact analysis for 4 different syringe preparation strategies: (1) all drugs prepared by anesthesiologist, (2) drugs prepared by anesthesiologist and hospital pharmacy, (3) drugs prepared by anesthesiologist and outsourcing facility, and (4) all drugs prepared by outsourcing facility. A strategy combining anesthesiologist and hospital pharmacy prepared drugs was associated with the lowest estimated annual cost in the base-case budget impact analysis with an annual cost of $225 592, which was lower than other strategies by a margin of greater than $86 000. A combination of anesthesiologist and hospital pharmacy prepared drugs resulted in the lowest annual cost in the budget impact analysis. However, the cost of drugs prepared by an outsourcing facility maybe lower if the capital investment needed for the establishment and maintenance of the US Pharmacopeial Convention Chapter compliant facility is included in the budget impact analysis. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Characterization of Microemulsions Prepared using Isopropyl ...

    African Journals Online (AJOL)

    HP

    subjected to further characterization by polarized light microscopy, differential scanning calorimetry. (DSC) ... preparation and phase inversion. The aim .... propanol, D = butanol, E = pentanol .... and water-soluble compounds in triglycerides. In.

  16. Preparing a Programmed Review in Accounting

    Science.gov (United States)

    Moore, Connie Remaly

    1975-01-01

    The programed review illustrated in this article was prepared for beginning accounting students to be used as a review of the basic accounting cycle before starting on the first practice set. (Author)

  17. Preoperative bowel preparation in children: Polyethylene glycol ...

    African Journals Online (AJOL)

    Preoperative bowel preparation in children: Polyethylene glycol versus normal saline. ... In children, (is this standard of care?: this method is mostly followed) this is usually ... Patients and Methods: Thirty patients, admitted in the Department of ...

  18. School age test or procedure preparation

    Science.gov (United States)

    ... your child with books, bubbles, games, hand-held video games, or other activities. PLAY PREPARATION Children often avoid ... using this type of communication. Older children may benefit from videos that show children of the same age explaining, ...

  19. Progress involving new techniques for liposome preparation

    Directory of Open Access Journals (Sweden)

    Zhenjun Huang

    2014-08-01

    Full Text Available The article presents a review of new techniques being used for the preparation of liposomes. A total of 28 publications were examined. In addition to the theories, characteristics and problems associated with traditional methods, the advantages and drawbacks of the latest techniques were reviewed. In the light of developments in many relevant areas, a variety of new techniques are being used for liposome preparation and each of these new technique has particular advantages over conventional preparation methods. However, there are still some problems associated with these new techniques that could hinder their applications and further improvements are needed. Generally speaking, due to the introduction of these latest techniques, liposome preparation is now an improved procedure. These applications promote not only advances in liposome research but also the methods for their production on an industrial scale.

  20. Preparation of aluminium lakes by electrocoagulation

    OpenAIRE

    Prapai Pradabkham

    2008-01-01

    Aluminium lakes have been prepared by electrocoagulation employing aluminium as electrodes. The electrocoagulation is conducted in an aqueous alcoholic solution and is completed within one hour. The dye content in the lake ranges approximately between 4-32%.

  1. Site preparation savings through better utilization standards

    Science.gov (United States)

    W.F. Watson; B.J. Stokes; I.W. Savelle

    1984-01-01

    This reports preliminary paper results of a study to determine the savings in the cost of site preparation that can be accomplished by the intensive utiliiation of understory biomass. mechanized sys terns can potentially be used for recovering this material.

  2. Adapting RNAseq sample preparation for ISS

    Data.gov (United States)

    National Aeronautics and Space Administration — The primary innovation for this CIF will be the ability to accomplish library preparation of isolated RNA that will enable transcriptional (RNA instead of DNA)...

  3. Thermochemical evaluation and preparation of cesium uranates

    International Nuclear Information System (INIS)

    Takano, Masahide; Minato, Kazuo; Fukuda, Kousaku; Sato, Seichi; Ohashi, Hiroshi.

    1997-03-01

    Two kinds of cesium uranates, Cs 2 UO 4 and Cs 2 U 2 O 7 , which are predicted by thermochemical estimation to be formed in irradiated oxide fuels, were prepared from U 3 O 8 and Cs 2 CO 3 for measurements of the thermal expansions and thermal conductivities. In advance of the preparation, thermochemical calculations for the formation and decomposition of these cesium uranates were performed by Gibbs free energy minimizer. The preparation temperatures for Cs 2 UO 4 and Cs 2 U 2 O 7 were determined from the results of the thermochemical calculations. The prepared samples were analyzed by X-ray diffraction, which showed that the single phases of Cs 2 UO 4 and Cs 2 U 2 O 7 were formed. Thermogravimetry and differential thermal analysis were also performed on these samples, and the decomposition temperatures were evaluated. The experimental results were in good agreement with those of the thermochemical calculations. (author)

  4. An improved calcium chloride method preparation and ...

    African Journals Online (AJOL)

    Jane

    2010-12-13

    Dec 13, 2010 ... In this paper, we have reported a modified method for preparation and transformation of competent cells. This modified ... MATERIALS AND METHODS. Growth media ..... lipidic phase-transition temperature, and thus enhance.

  5. Application of artificial intelligence in coal preparation

    Energy Technology Data Exchange (ETDEWEB)

    Kuang, Y.; Deng, J.; Liu, H. [China University of Mining and Technology, Xuzhou (China). School of Chemical Engineering and Technology

    2001-11-01

    The general situation of using AI (Artificial intelligence) technology in coal preparation was introduced. The expert systems of coal preparation plant design, the expert management system of coal preparation plant, and the intelligent data-drawing bank were discussed. Some opinions about their foundation and method of knowledge expressing, inference, knowledge discovery of databases were presented. It is pointed out that an industrial system such as coal preparation is big and complex, so it is necessary and also difficult to use AI technology in these systems. Because the types of knowledge are different, there are various knowledge expressions and model of knowledge inference, hence only comprehensive methods suitable for the characters of the system may be used. 14 refs., 5 figs.

  6. Simplified preparation of coniferyl and sinapyl alcohols.

    Science.gov (United States)

    Kim, Hoon; Ralph, John

    2005-05-04

    Coniferyl and sinapyl alcohols were prepared from commercially available coniferaldehyde and sinapaldehyde using borohydride exchange resin in methanol. This reduction is highly regioselective and exceptionally simple, making these valuable monolignols readily available to researchers lacking synthetic chemistry expertise.

  7. Preparing tomorrow's transportation workforce : a Midwest summit.

    Science.gov (United States)

    2010-08-01

    Preparing Tomorrows Transportation Workforce: A Midwest Summit, held April 2728, 2010, in Ames, Iowa, was one of several : regional transportation workforce development summits held across the United States in 2009 and 2010 as part of a coordin...

  8. Infant Formula - Buying, Preparing, Storing, and Feeding

    Science.gov (United States)

    ... 000806.htm Infant Formula - buying, preparing, storing, and feeding To use the sharing features on this page, ... brush to get at hard-to-reach places. Feeding Formula to Baby Here is a guide to ...

  9. Preoperative antiseptic skin preparations and reducing SSI.

    Science.gov (United States)

    Al Maqbali, Mohammed Abdullah

    Surgical site infection (SSI) can affect the quality of care and increase the morbidity and mortality rate in after-surgical procedure. The use of an antiseptic skin preparation agent before the procedure can reduce the pathogens in the skin surface around the incision. Indicating the type of skin antiseptic preparation could prevent the infection and contamination of the wound. The most commonly used types of skin preparations are chlorhexidine and povidone iodine. However, the antiseptic solutions of both agents are strengthened with alcohol to prevent postoperative wound infection. The aim of this paper is to identify the best antiseptic agent in terms of skin preparation by evaluating the evidence in the literature. The factors associated with choosing the antiseptic skin agent, such as patients' allergies, skin condition and environmental risk, are also taken into account. This review suggests that cholorhexdine with alcohol may be the most effective in terms of reducing SSI.

  10. Preparation of targets by ion implantation

    International Nuclear Information System (INIS)

    Santry, D.C.

    1976-01-01

    Various factors are described which are involved in target preparation by direct ion implantation and the limitations and pitfalls of the method are emphasized. Examples are given of experiments for which ion implanted targets are well suited. (author)

  11. Design and preparation of controlled floating gastroretentive ...

    African Journals Online (AJOL)

    gastroretentive delivery systems for enhanced fexofenadine ... Abstract. Purpose: To design and prepare effervescent floating gastroretentive tablets for controlled fexofenadine ..... Complex of Carbopol with Polyvinylpyrrolidone as a. Matrix for ...

  12. Immediate field of intervention: undergraduate college Preparation ...

    Indian Academy of Sciences (India)

    ... field of intervention: undergraduate college Preparation: at research institutes and universities The challenge: to transform the disciplines themselves Make them relevant and responsive. First step: create innovative interactions across the higher education spectrum, between Research Institute-University-College.

  13. Biosynthetic preparation of 35-S labelled methionine

    International Nuclear Information System (INIS)

    Freud, A.; Hirshfeld, N.; Teitelbaum, Z.; Heimer, Y.

    1986-11-01

    High specific activity methionine with sulfur-35 was prepared in our laboratory by growing Baker's yeast cells, in a medium containing 35 S-sulfate. L-S 35 methionine was prepared from the acid hydrolyzate of the proteins by chromatography on whatman paper. The specific activity was determined using o-phtaladehyde as a fluorophore to form a fluorescent complex. The specific activity was found to be usually greater than 800 Ci/mmol. (Author)

  14. Progress of 90Y generator preparation

    International Nuclear Information System (INIS)

    Yin Bangshun; Li Mingqi; Deng Qimin; Cheng Zuoyong

    2009-01-01

    90 Y is an important radionuclide in radioimmunotherapy. The medical 90 Y is mainly obtained from 90 Y generator through methods of precipitation,coprecipitation, electrodeposition, solvent extraction, chromatography and so on. The progress of 90 Y generator, the advantages and disadvantages of different types of 90 Y generator, and the tendency of 90 Y generator preparation were described respectively. Comprehensive analysis showed that inorganic ion-exchange chromatography will be the main tendency of future 90 Y generator preparation. (authors)

  15. Calcination under negative atmosphere for SYNROC preparation

    International Nuclear Information System (INIS)

    Ambashta, R.D.; Wattal, P.K.; Govindankutty, K.V.

    2006-01-01

    SYNROC-C is a ceramic waste formulation designed to immobilise reprocessing waste from fast breeder reactor. This formulation is capable of incorporating noble metals, other fission products, corrosion products and activation products in its multiphase assemblage. Calcination is an important step of SYNROC preparation for decomposition of nitrates of the radioactive waste and conversion to oxide precursors. This paper presents a comparison between properties of calcine prepared under different calcination procedures to obtain product suitable for compaction

  16. Innovative methods for inorganic sample preparation

    Energy Technology Data Exchange (ETDEWEB)

    Essling, A.M.; Huff, E.A.; Graczyk, D.G.

    1992-04-01

    Procedures and guidelines are given for the dissolution of a variety of selected materials using fusion, microwave, and Parr bomb techniques. These materials include germanium glass, corium-concrete mixtures, and zeolites. Emphasis is placed on sample-preparation approaches that produce a single master solution suitable for complete multielement characterization of the sample. In addition, data are presented on the soil microwave digestion method approved by the Environmental Protection Agency (EPA). Advantages and disadvantages of each sample-preparation technique are summarized.

  17. Sample preparations for spark source mass spectrography

    International Nuclear Information System (INIS)

    Catlett, C.W.; Rollins, M.B.; Griffin, E.B.; Dorsey, J.G.

    1977-10-01

    Methods have been developed for the preparation of various materials for spark source mass spectrography. The essential features of these preparations (all which can provide adequate precision in a cost-effective manner) consist in obtaining spark-stable electrode sample pieces, a common matrix, a reduction of anomolous effects in the spark, the incorporation of a suitable internal standard for plate response normalization, and a reduction in time

  18. Preparation of pure phenols from tars

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, J

    1933-02-07

    A process is disclosed for the preparation of pure phenols from brown coal tar, shale tar, or primary tar, characterized in that the raw oil obtained from the tar is carefully fractionated, in a suitable way without or with a slight pressure decrease, or before the fractionation the raw oil is heated to free the prepared phenolate solution from impurities after successful oxidation by passing in steam at a temperature between 100 and 120/sup 0/C.

  19. Preparation of porous materials for radionuclides capture

    International Nuclear Information System (INIS)

    Bajzikova, Anna; Smrcek, Stanislav; Kozempel, Jan; Vlk, Martin; Barta, Jan

    2015-01-01

    Porous materials showing promise for radionuclide capture from water at contaminated sites were prepared. Nanoporous materials (size of pores 1-100 nm) and some polymers are well suited to this purpose owing their affinity for selected radionuclides. Nanoporous metal oxides and silica gel with styrene-divinylbenzene-TODGA-modified surface were prepared, characterized and tested for radionuclide ( 227 Ac, 227 Th, 223 Ra) capture efficiency. (orig.)

  20. Return on investment (ROI) proposal preparation guide

    International Nuclear Information System (INIS)

    Valero, O.J.

    1998-01-01

    The ROI Proposal Preparation Guide is a tool to assist Hanford waste generators in preparing ROI proposal forms for submittal to Department of Energy, Richland Operations Office (DOE/RL) for funding. The guide describes the requirements for submitting an ROI proposal and provides examples of completed ROI forms. The intent is to assist waste generators in identifying projects that meet the criteria, provide information necessary to complete the ROI forms, and submit a proposal that is eligible to receive funding

  1. Innovative methods for inorganic sample preparation

    International Nuclear Information System (INIS)

    Essling, A.M.; Huff, E.A.; Graczyk, D.G.

    1992-04-01

    Procedures and guidelines are given for the dissolution of a variety of selected materials using fusion, microwave, and Parr bomb techniques. These materials include germanium glass, corium-concrete mixtures, and zeolites. Emphasis is placed on sample-preparation approaches that produce a single master solution suitable for complete multielement characterization of the sample. In addition, data are presented on the soil microwave digestion method approved by the Environmental Protection Agency (EPA). Advantages and disadvantages of each sample-preparation technique are summarized

  2. Preparation of very pure active carbon

    International Nuclear Information System (INIS)

    Sloot, H.A. van der; Hoede, D.; Zonderhuis, J.; Meijer, C.

    1980-02-01

    The preparation of very pure active carbon is described. Starting from polyvinylidene chloride active carbon is prepared by carbonization in a nitrogen atmosphere, grinding, sieving and activation of the powder fraction with CO 2 at 950 0 to approximately 50% burn-off. The concentrations of trace and major elements are reduced to the ppb and ppm level, respectively. In the present set-up 100 g of carbon grains and approximately 50 g of active carbon powder can be produced weekly

  3. Preparation of kits for 99Tcm radiopharmaceuticals

    International Nuclear Information System (INIS)

    1992-05-01

    This publication details preparation under Good Manufacturing Practices (GMP) of thirteen widely used 99 Tc m radiopharmaceuticals and their quality assurance practices. The objective of this document is to present to those who intend to launch a kit preparation programme a set of preparation procedures and other relevant information gathered during kit production over a period of more than a decade, to serve as a good starting point. The manuals and monographs included in the document are based on the experience gained in two major centres. The publication of this material is intended to give a typical example, and not the only possible procedure for preparing the kits. Following the essentials of these kit preparation procedures, it is always possible to make alterations to the composition of the kits. The kits described here concern widely used 99 Tc m radiopharmaceuticals which do not require a Single Photon Emission Computed Tomography (SPECT) camera. These examples of the ''first generation'' of kits are not very intricate to prepare. Although it is advisable to have only one agent for a given intended use, a few agents for each purpose, e.g. EHDP and MDP for bone imagining, have been included in the document so that the reader can have some flexibility in selecting a particular kit. 24 refs, 2 figs

  4. Microfluidic Sample Preparation for Diagnostic Cytopathology

    Science.gov (United States)

    Mach, Albert J.; Adeyiga, Oladunni B.; Di Carlo, Dino

    2014-01-01

    The cellular components of body fluids are routinely analyzed to identify disease and treatment approaches. While significant focus has been placed on developing cell analysis technologies, tools to automate the preparation of cellular specimens have been more limited, especially for body fluids beyond blood. Preparation steps include separating, concentrating, and exposing cells to reagents. Sample preparation continues to be routinely performed off-chip by technicians, preventing cell-based point-of-care diagnostics, increasing the cost of tests, and reducing the consistency of the final analysis following multiple manually-performed steps. Here, we review the assortment of biofluids for which suspended cells are analyzed, along with their characteristics and diagnostic value. We present an overview of the conventional sample preparation processes for cytological diagnosis. We finally discuss the challenges and opportunities in developing microfluidic devices for the purpose of automating or miniaturizing these processes, with particular emphases on preparing large or small volume samples, working with samples of high cellularity, automating multi-step processes, and obtaining high purity subpopulations of cells. We hope to convey the importance of and help identify new research directions addressing the vast biological and clinical applications in preparing and analyzing the array of available biological fluids. Successfully addressing the challenges described in this review can lead to inexpensive systems to improve diagnostic accuracy while simultaneously reducing overall systemic healthcare costs. PMID:23380972

  5. Implant Fixture Heat Transfer During Abutment Preparation.

    Science.gov (United States)

    Aleisa, Khalil; Alkeraidis, Abdullah; Al-Dwairi, Ziad Nawaf; Altahawi, Hamdi; Lynch, Edward

    2015-06-01

    The purpose of the study was to evaluate the effect of water flow rate on the heat transmission in implants during abutment preparation using a diamond bur in a high-speed dental turbine. Titanium-alloy abutments (n = 32) were connected to a titanium-alloy implant embedded in an acrylic resin within a water bath at a controlled temperature of 37°C. The specimens were equally distributed into 2 groups (16 each) according to the water flow rate used during the preparation phase. Group 1 had a water flow rate of 24 mL/min, and group 2 had a water flow rate of 40 mL/min. Each abutment was prepared in the axial plane for 1 minute and in the occlusal plane for 1 minute with a coarse tapered diamond bur using a high-speed dental handpiece. Thermocouples embedded at the cervix of the implant surface were used to record the temperature of heat transmission from the abutment preparation. Heat generation was measured at 3 distinct times (immediately and 30 seconds and 60 seconds after the end of preparation). Statistical analyses were carried out using 2-way analysis of variance and the Student t test. Water flow rates (24 mL vs 40 mL) and time interval had no statistically significant effect on the implant's temperature change during the abutment preparation stage (P = .431 and P = .064, respectively). Increasing the water flow rate from 24 to 40 mL/min had no influence on the temperature of the implant fixture recorded during preparation of the abutment.

  6. Remote state preparation of spatial qubits

    Energy Technology Data Exchange (ETDEWEB)

    Solis-Prosser, M. A.; Neves, L. [Center for Optics and Photonics, Universidad de Concepcion, Casilla 4016, Concepcion (Chile) and Departamento de Fisica, Universidad de Concepcion, Casilla 160-C, Concepcion (Chile)

    2011-07-15

    We study the quantum communication protocol of remote state preparation (RSP) for pure states of qubits encoded in single photons transmitted through a double slit, the so-called spatial qubits. Two measurement strategies that one can adopt to remotely prepare the states are discussed. The first strategy is the well-known spatial postselection, where a single-pixel detector measures the transverse position of the photon between the focal and the image plane of a lens. The second strategy, proposed by ourselves, is a generalized measurement divided into two steps: the implementation of a two-outcome positive operator-valued measurement (POVM) followed by the spatial postselection at the focal plane of the lens by a two-pixel detector in each output of the POVM. In both cases we analyze the effects of the finite spatial resolution of the detectors over three figures of merit of the protocol, namely, the probability of preparation, the fidelity, and purity of the remotely prepared states. It is shown that our strategy improves these figures compared with spatial postselection, at the expense of increasing the classical communication cost as well as the required experimental resources. In addition, we present a modified version of our strategy for RSP of spatial qudits which is able to prepare arbitrary pure states, unlike spatial postselection alone. We expect that our study may also be extended for RSP of the angular spectrum of a single-photon field as an alternative for quantum teleportation which requires very inefficient nonlinear interactions.

  7. Remote state preparation of spatial qubits

    International Nuclear Information System (INIS)

    Solis-Prosser, M. A.; Neves, L.

    2011-01-01

    We study the quantum communication protocol of remote state preparation (RSP) for pure states of qubits encoded in single photons transmitted through a double slit, the so-called spatial qubits. Two measurement strategies that one can adopt to remotely prepare the states are discussed. The first strategy is the well-known spatial postselection, where a single-pixel detector measures the transverse position of the photon between the focal and the image plane of a lens. The second strategy, proposed by ourselves, is a generalized measurement divided into two steps: the implementation of a two-outcome positive operator-valued measurement (POVM) followed by the spatial postselection at the focal plane of the lens by a two-pixel detector in each output of the POVM. In both cases we analyze the effects of the finite spatial resolution of the detectors over three figures of merit of the protocol, namely, the probability of preparation, the fidelity, and purity of the remotely prepared states. It is shown that our strategy improves these figures compared with spatial postselection, at the expense of increasing the classical communication cost as well as the required experimental resources. In addition, we present a modified version of our strategy for RSP of spatial qudits which is able to prepare arbitrary pure states, unlike spatial postselection alone. We expect that our study may also be extended for RSP of the angular spectrum of a single-photon field as an alternative for quantum teleportation which requires very inefficient nonlinear interactions.

  8. Alcohol skin preparation causes surgical fires.

    Science.gov (United States)

    Rocos, B; Donaldson, L J

    2012-03-01

    Surgical fires are a rare but serious preventable safety risk in modern hospitals. Data from the US show that up to 650 surgical fires occur each year, with up to 5% causing death or serious harm. This study used the National Reporting and Learning Service (NRLS) database at the National Patient Safety Agency to explore whether spirit-based surgical skin preparation fluid contributes to the cause of surgical fires. The NRLS database was interrogated for all incidents of surgical fires reported between 1 March 2004 and 1 March 2011. Each report was scrutinised manually to discover the cause of the fire. Thirteen surgical fires were reported during the study period. Of these, 11 were found to be directly related to spirit-based surgical skin preparation or preparation soaked swabs and drapes. Despite manufacturer's instructions and warnings, surgical fires continue to occur. Guidance published in the UK and US states that spirit-based skin preparation solutions should continue to be used but sets out some precautions. It may be that fire risk should be included in pre-surgical World Health Organization checklists or in the surgical training curriculum. Surgical staff should be aware of the risk that spirit-based skin preparation fluids pose and should take action to minimise the chance of fire occurring.

  9. 5 Ways to Prepare for Your Sports Season

    Science.gov (United States)

    ... English Español 5 Ways to Prepare for Your Sports Season KidsHealth / For Teens / 5 Ways to Prepare ... temporada deportiva 5 Ways to Prepare for Your Sports Season If you've ever played competitive sports, ...

  10. Preparation of zirconium molybdate gel generator

    International Nuclear Information System (INIS)

    Charoen, S.; Aungurarat, G.; Laohawilai, S.; Sukontpradit, W.; Jingjit, S.

    1994-01-01

    A procedure for preparation of 99mTc generator based on conversion to zirconium molybdate gel of 99Mo produced by neutron activation was reported. The gel was prepared from zirconium oxychloride solution pH 1.6, ammonium molybdate solution pH 3-5 and mole ratio of Zr:Mo 1:1 which had water content about 7-8%. Small generators containing 1-1.5 g of gel were eluted with average efficiencies of 77% and the activity peak in the first 3 ml of 10 ml of saline solution. The amount of Mo and Zr in eluates were below the acceptance limit. The gel generators of activity about 100 mCi were prepared and had the good performance in elutability and stability

  11. Preparative electrophoresis of industrial fission product solutions

    International Nuclear Information System (INIS)

    Tret, Joel

    1971-07-01

    The aim of this work is to contribute to the development of the continuous electrophoresis technique while studying its application in the preparative electrophoresis of industrial fission product solutions. The apparatus described is original. It was built for the purposes of the investigation and proved very reliable in operation. The experimental conditions necessary to maintain and supervise the apparatus in a state of equilibrium are examined in detail; their stability is an important factor, indispensable to the correct performance of an experiment. By subjecting an industrial solution of fission products to preparative electrophoresis it is possible, according to the experimental conditions, to prepare carrier-free radioelements of radiochemical purity (from 5 to 7 radioelements): 137 Cs, 90 Sr, 141+144 Ce, 91 Y, 95 Nb, 95 Zr, 103+106 Ru. (author) [fr

  12. Photonic devices prepared by embossing in PDMS

    Energy Technology Data Exchange (ETDEWEB)

    Jandura, D., E-mail: jandura@fyzika.uniza.sk; Pudis, D.; Berezina, S.

    2017-02-15

    Highlights: • Fabrication technology of photonic devices based on embossing in PDMS is presented. • Analysis of morphological properties of prepared devices in PDMS by CLSM and AFM. • Spectral characterization of PDMS ring resonator proved the resonator functionality. - Abstract: In this paper, we present useful technique for fabrication of novel photonic devices created in the polydimethylsiloxane (PDMS). We use combination of direct laser writing in thin photoresist layer with embossing process of liquid PDMS. We prepared ring resonator and Mach-Zehnder interferometer in PDMS. The shape of prepared PDMS photonic devices was analyzed by confocal laser microscope and atomic force microscope. Optical characterization of these devices reveals extinction ratios of up to 20 dB.

  13. Preparation of silver doped high temperature superconductors

    International Nuclear Information System (INIS)

    Stavek, Jiri; Zapletal, Vladimir

    1989-01-01

    High temperature superconductors were prepared by the controlled double-jet precipitation to manipulate the chemical composition, composition gradients, average grain size, grain size distribution, and other factors which contribute to the actual properties and performance of HTSC. The cations (Y-Ba-Cu or Bi-Pb-Ca-Sr-Cu) and oxalic anions solutions were simultaneously separately introduced to the crystallizer with a stirred solution of gelatin under conditions where the temperature, excess of oxalic anions in solution, pH, reactant addition rate, and other reaction conditions were tightly controlled to prepare the high sinterability powder. To increase the sinterability of submicron particles of produced precursor, the silver ions were introduced at the end of the controlled double-jet precipitation. This approach improves the electrical and mechanical properties of produced HTSC specimens. The controlled double jet precipitation provides a viable technique for preparation of oxide superconductors and the process is amenable for scaling up

  14. Evaluating a nurse mentor preparation programme.

    Science.gov (United States)

    Gray, Olivia; Brown, Donna

    Following the introduction of a regional nurse mentor preparation programme, research was undertaken within a health and social care trust to explore both the trainee mentors' and their supervisors' perception of this new programme. A qualitative study involving focus groups was undertaken. The focus groups comprised a total of twelve participants including five trainee mentors and seven supervisors (experienced mentors) who had recently completed a mentor preparation programme. Data were analysed using Braun and Clarke's thematic analysis. Three themes were identified from the data: personal investment (including the emotional impact of mentoring) contextual perceptions (environmental factors such as time) and intellectual facets (related to personal and professional growth). Comprehensive preparation for mentors appears to be effective in developing mentors with the ability to support nursing students in practice. However, further study is required to explore how to support mentors to balance the demands of the mentoring role with the delivery of patient care.

  15. Spectrally selective paint coatings. Preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Crnjak Orel, Z.C.; Klanjsek Gunde, M. [National Institute of Chemistry, Hajdrihova 19, SI-1000 Ljubljana (Slovenia)

    2001-06-01

    Preparation and characterization of spectrally selective paint coating for photothermal solar energy conversion are discussed. The applied methods for preparation of paints with described measurements and calculations of black-pigmented coatings were reviewed. The article represents not only possible future applications but also past and current applications of spectrally selective paint coating which are used all over the world since the 1980s. Spectrally selective paint coatings based on combinations of two types of resins, various types of pigments and three types of silica, were prepared. The influence of pigment type and pigment volume concentration (PVC) was studied by applying the Kubelka-Munk (K-M) theory. The relation between the degrees of dispersion and distribution of pigment particles across the paint layer is discussed in terms of K-M coefficients.

  16. Antioxidant potential of selected Spirulina platensis preparations.

    Science.gov (United States)

    Dartsch, Peter C

    2008-05-01

    Recent studies suggest that Spirulina, a unicellular blue-green alga, may have a variety of health benefits and therapeutic properties and is also capable of acting as an antioxidant and antiinflammatory agent. In this study, a cell-free and a cell-based test assay were used to examine the antioxidant and antiinflammatory properties of four selected Spirulina platensis preparations: (1) Biospirulina, (2) SpiruComplex, a preparation with naturally bound selenium, chromium and zinc, (3) SpiruZink, a preparation with naturally bound zinc, (4) Zinkspirulina + Acerola, a preparation with naturally bound zinc and acerola powder. The cell-free test assay used potassium superoxide as a donor for superoxide radicals, whereas the cell-based test assay used the formation of intracellular superoxide radicals of functional neutrophils upon stimulation by phorbol-12-myristate-13-acetate as a model to investigate the potential of Spirulina preparations to inactivate superoxide radicals. In accordance with the recommended daily dosage, test concentrations ranging from 50 to 1000 microg/mL were chosen. The results showed a dose-dependent inactivation of free superoxide radicals (antioxidant effect) as well as an antiinflammatory effect characterized by a dose-dependent reduction of the metabolic activity of functional neutrophils and a dose-dependent inactivation of superoxide radicals generated during an oxidative burst. The results demonstrate that the tested Spirulina preparations have a high antioxidant and antiinflammatory potential. Especially SpiruZink and Zinkspirulina + Acerola might be useful as a supportive therapeutic approach for reducing oxidative stress and/or the generation of oxygen radicals in the course of inflammatory processes.

  17. Stability of extemporaneously prepared rifaximin oral suspensions.

    Science.gov (United States)

    Cober, Mary Petrea; Johnson, Cary E; Lee, Jordan; Currie, Kenne

    2010-02-15

    The stability of extemporaneously prepared rifaximin oral suspensions was studied. An oral suspension of rifaximin 20 mg/mL was prepared by thoroughly grinding six 200-mg tablets of rifaximin in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of each formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and were stored at room temperature (23-25 degrees C). A 1-mL sample was withdrawn from each of the six bottles with a micropipette immediately after preparation and at 7, 15, 30, and 60 days. After further dilution to an expected concentration of 20 microg/mL with mobile phase, the samples were assayed in duplicate using stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and pH was tested on each day of analysis. Stability was determined by evaluating the percentage of the initial concentration remaining at each time point and defined as retention of at least 90% of the initial concentration of rifaximin. At least 99% of the initial rifaximin remained throughout the 60-day study period in both preparations. There were no detectable changes in color, odor, taste, or pH and no visible microbial growth in any sample. Extemporaneously prepared suspensions of rifaximin 20 mg/mL in 1:1 mixtures of Ora-Plus with either Ora-Sweet or Ora-Sweet SF were stable for at least 60 days when stored in 2-oz amber plastic bottles at room temperature.

  18. Gelatin/chitosan biofilm: preparation and characterization

    International Nuclear Information System (INIS)

    Trindade, Luciane da C.; Nunes, Raquel A.; Diniz, Nadie K.S.; Braga, Carla R.C.; Silva, Suedina M. de Lima

    2011-01-01

    In this study, gelatin, chitosan and gelatin/chitosan bio films using the ratio of gelatin/chitosan (50/50) were prepared by casting method. The bio films prepared were characterized by X-ray diffraction, scanning electron microscopy and dissolution ratio. According to the results, the incorporation of chitosan into gelatin indicate the decrease of crystallinity of chitosan, a compact structure without large pores and that the dissolution of gelatin/chitosan film is little influenced by hot water than gelatin films. (author)

  19. Bone preparation at the KCCAMS laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Beaumont, Will, E-mail: wbeaumon@uci.ed [Earth System Science Dept., University of California, B321 Croul Hall, Irvine, CA 92697-3100 (United States); Beverly, Robert; Southon, John [Earth System Science Dept., University of California, B321 Croul Hall, Irvine, CA 92697-3100 (United States); Taylor, R.E. [Department of Anthropology, University of California, Riverside, CA 92521 (United States)

    2010-04-15

    Collagen purification by ultrafiltration is becoming widely accepted as a superior {sup 14}C sample preparation method for removing environmental contamination from archaeological bone. We present an overview of bone sample preparation methods used at the KCCAMS laboratory, UC Irvine. Methods development data are also discussed, including results of tests of gelatinization temperature, evaluation of 10 kDa vs. 30 kDa molecular weight (MW) ultrafiltration, improvements to ultrafilter cleaning methods, tests of ultrafilter memory, and ultrafilter glycerin contamination. These tests were not intended to be exhaustive, but rather to show how standard procedures can be validated and improved with relatively little effort.

  20. Preparation of honey sample for tritium monitoring

    International Nuclear Information System (INIS)

    Chen Bingru; Wang Chenlian; Wang Weihua

    1989-01-01

    The method of preparation of honey sample for tritium monitoring was described. The equipments consist of an air and honey supply system, a quartz combustor with CM-type monolithic combustion catalyst and a condensation system. In the equipments, honey sample was converted into cooling water by the distilling, cracking and carbonizing procedures for tritium counting. The recovery ratio is 99.0 ± 4.5 percent for tritiated water and 96.0 ± 2.0 for tritiated organic compounds. It is a feasible preparing method for the total tritium monitoring in honey sample

  1. Preservation and storage of prepared ballistic gelatine.

    Science.gov (United States)

    Mattijssen, E J A T; Alberink, I; Jacobs, B; van den Boogaard, Y

    2016-02-01

    The use of ballistic gelatine, generally accepted as a human muscle tissue simulant in wound ballistic studies, might be improved by adding a preservative (Methyl 4-hydroxybenzoate) which inhibits microbial growth. This study shows that replacing a part of the gelatine powder by the preservative does not significantly alter the penetration depth of projectiles. Storing prepared blocks of ballistic gelatine over time decreased the penetration depth of projectiles. Storage of prepared gelatine for 4 week already showed a significant effect on the penetration depth of projectiles. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  2. [Research on the preparative method of Arctigenin].

    Science.gov (United States)

    Zhang, Li-Ying; Yang, Yi-Shun; Zhang, Tong; Ding, Yue; Cai, Zhen-Zhen; Tao, Jian-Sheng

    2012-03-01

    To research on the preparation of Arctigenin in vitro. Took enzyme concentration, time course and substrate concentration as investigation factors, used Box-Behnken design-response surface methodology to optimize the enzyme hydrolysis path of Arctigenin. The best operational path for Arctigenin was as follows: the temperature was 50 degrees C, pH was 4.8, enzyme concentration was 0.44 U/mL, time course was 46.81 min, substrate concentration was 0.29 mg/mL, the conversion rate was 90.94%. This research can be regarded as a referencein preparing Arctigenin in vitro.

  3. Preparation of super absorbent by irradiation polymerization

    International Nuclear Information System (INIS)

    Hua Fengjun; Tan Chunhong; Qian Mengping

    1995-01-01

    A kind of absorbent is prepared by gamma-rays irradiated by reversed-phase suspension polymerization. Drying particles have 1400 (g/g) absorbency in de-ionic water. Effects of reactive conditions, e.g.: dose-rate, dose, monomer concentration, degree of monomer neutralization and crosslinking agents on absorbency in de-ionic water are discussed. The cause of absorbing de-ionic water by polymer is related to its network structure and ionic equilibrium in particle. Accordingly, a suit reactive condition is chosen for preparation of hydro gel spheres

  4. Preparation and evaluation of famotidine polymorphs.

    Science.gov (United States)

    Nagaraju, Ravouru; Prathusha, Ande Penchala; Subhash Chandra Bose, Penjury; Kaza, Rajesh; Bharathi, Koganti

    2010-06-01

    The main objective of this study was to compare the behaviour of drug release among the famotidine polymorphs prepared by using various additives and solvents, by solvent evaporation method. The famotidine polyvinyl pyrrolidone polymorphs with different concentrations (0.5, 1 and 1.5%) were prepared by using solvent evaporation method. In these polymorphs of different concentrations 1% w/v polymorphs showed better release. Similarly, famotidine polymorphs of Tween 80 with different concentrations, polyethylene glycol 1% w/v and methanol was prepared. Famotidine polymorphs prepared the PVP (1% w/v) showed better drug release and solubility. DSC, FTIR, SEM and XRD studies were carried out. DSC studies revealed that PVP polymorphs were found to stable compared to other polymorphs. FTIR studies of the polymorphs prepared indicated that there was an interaction found in all polymorphs except PVP polymorphs indicating the absence of drug-additive interaction. SEM studies of PVP and methanol polymorphs revealed that they are tabular and prismatic and columnar respectively. These changes in morphology were due to variations in face dimensions and also properties of additives and solvent used in the preparation. XRD studies revealed that there is an increase in crystallinity in methanol polymorphs when compared to PVP polymorphs and pure drug. The mechanism of drug release was determined using zero order, first order and Hixon-Crowel equations. From the drug release kinetics these polymorphs followed first order and Hixon-Crowel release kinetics, exhibited fair linearity in their dissolution data. Further, in vivo studies were carried out for the evaluation of antiulcer activity. Based upon the drug release pattern and its kinetics only two of the prepared polymorphs of famotidine i.e. famotidine PVP polymorphs and famotidine methanol polymorphs were selected for animal studies. Antiulcer studies were carried out using pylorus ligation model and estimation of antioxidant

  5. Prepare for an SpR interview.

    Science.gov (United States)

    Garner, J P; Heppell, P S J

    2003-03-01

    By the time you attend an interview for a military SpR number you should have no real problems but it pays to be prepared. Begin preparations early, reading widely and talk to as many people as possible. Your consultants will have a useful viewpoint on the proceedings and may be able to help you refine your answers to the common questions. Arrive at your interview in a smart and timely fashion and answer questions with confidence and common sense. Avoid confrontation and bluff and be courteous at all times, whatever you may be feeling inside and thank the interview panel as you leave.

  6. Preparation of conductive membranes using poly pyrrole

    International Nuclear Information System (INIS)

    Madaeni, S.; Khavaran, B.

    2003-01-01

    Conductive membranes show many benefits including fouling reduction for feeds containing ionic species. These membranes may be prepared either by conductive polymers or coating of the surfaces of non-conductive membranes with conductive polymer. In this research, the commercial micro filtration GVHP membrane manufactured from PVDF was coated with poly pyrrole using two different techniques. The conductivity of the prepared membranes was measured. In this paper, effects of various factors including concentration of the solutions, oxidizing agents, time for leaving the support in the solutions, support type and temperature on membrane conductivity were investigated

  7. Progress in Preparation of Monodisperse Polymer Microspheres

    Science.gov (United States)

    Zhang, Hongyan

    2017-12-01

    The monodisperse crosslinked polymer microspheres have attracted much attention because of their superior thermal and solvent resistance, mechanical strength, surface activity and adsorption properties. They are of wide prospects for using in many fields such as biomedicine, electronic science, information technology, analytical chemistry, standard measurement and environment protection etc. Functional polymer microspheres prepared by different methods have the outstanding surface property, quantum size effect and good potential future in applications with its designable structure, controlled size and large ratio of surface to volume. Scholars of all over the world have focused on this hot topic. The preparation method and research progress in functional polymer microspheres are addressed in the paper.

  8. Preparation of americium source for smoke detector

    International Nuclear Information System (INIS)

    Ramaswami, A.; Singh, R.J.; Manohar, S.B.

    1994-01-01

    This report describes the method developed for the preparation of 241 Am source for smoke detector. Americium was electrodeposited from iso-propyl alcohol medium on silver backing. Thin layer of gold (few hundred micro gram thick) was plated on the americium source to make it safe for handling. The thickness of plated gold was such that the alpha radiations from the 241 Am source could escape out of the gold layer and cause ionisation in the surrounding air. The performance of the prepared sources were checked in a smoke detector and was found to be satisfactory and comparable to the imported sources. (author). 1 refs., 2 figs., 1 tab

  9. Experimental preparation and verification of quantum money

    Science.gov (United States)

    Guan, Jian-Yu; Arrazola, Juan Miguel; Amiri, Ryan; Zhang, Weijun; Li, Hao; You, Lixing; Wang, Zhen; Zhang, Qiang; Pan, Jian-Wei

    2018-03-01

    A quantum money scheme enables a trusted bank to provide untrusted users with verifiable quantum banknotes that cannot be forged. In this work, we report a proof-of-principle experimental demonstration of the preparation and verification of unforgeable quantum banknotes. We employ a security analysis that takes experimental imperfections fully into account. We measure a total of 3.6 ×106 states in one verification round, limiting the forging probability to 10-7 based on the security analysis. Our results demonstrate the feasibility of preparing and verifying quantum banknotes using currently available experimental techniques.

  10. Preparation and characterisation of superheated drop detectors

    International Nuclear Information System (INIS)

    Krishnamoorthy, P.

    1989-01-01

    Basic mechanism of bubble nucleation in superheated drops with respect to minimum energy of radiation and temperature is discussed. Experimental details and techniques for the preparation of Superheated Drop Detectors (SDDs) is explained. For the sample preparation, homogeneous composition of polymer (Morarfloc) and glycerine was used as the host medium and three different refrigerants Mafron-21, Mafron-12 and Mafron-11/12 (50:50) were chosen as the sensitive liquids. A pressure reactor developed at Health and Safety Laboratory is used for dispersing the sensitive liquid drops in the homogeneous composition under pressure. Some of the imporatant detector characteristics were studied. (author). 26 refs., 9 figs., 1 tab

  11. Preparing Schrodinger cat states by parametric pumping

    Science.gov (United States)

    Leghtas, Zaki; Touzard, Steven; Pop, Ioan; Vlastakis, Brian; Zalys-Geller, Evan; Albert, Victor V.; Jiang, Liang; Frunzio, Luigi; Schoelkopf, Robert J.; Mirrahimi, Mazyar; Devoret, Michel H.

    2014-03-01

    Maintaining a quantum superposition state of light in a cavity has important applications for quantum error correction. We present an experimental protocol based on parametric pumping and Josephson circuits, which could prepare a Schrodinger cat state in a cavity. This is achieved by engineering a dissipative environment, which exchanges only pairs or quadruples of photons with our cavity mode. The dissipative nature of this preparation would lead to the observation of a dynamical Zeno effect, where the competition between a coherent drive and the dissipation reveals non trivial dynamics. Work supported by: IARPA, ARO, and NSF.

  12. The Hathaway Scholarship and Academic Preparation: A Study of Perceptions of Academic Preparation and Academic Success

    Science.gov (United States)

    Aagard, Tammy Lindsay

    2010-01-01

    With the implementation of the Hathaway scholarship in the state of Wyoming, questions arose regarding the effectiveness of a prescribed set of high school courses (the Success Curriculum) in preparing students for success in college. This research sought to determine the perceptions of academic preparation of students who earned the Hathaway…

  13. Preparation of bipolar membranes by electrospinning

    International Nuclear Information System (INIS)

    Pan, Jiefeng; Hou, Linxiao; Wang, Qiuyue; He, Yubin; Wu, Liang; Mondal, Abhishek N.; Xu, Tongwen

    2017-01-01

    A new preparative pathway for the bipolar membranes was initiated via the electrospinning and hot-press process. The prepared bipolar membrane was consisting of sulfonated poly (phenylene oxide), polyethylene glycol, and quaternized poly (phenylene oxide). The above mentioned membrane was fabricated by the continuous electrospinning of the respective layer, followed by the solvent atmosphere treatment and hot-pressing, to obtain a transparent and dense structure. The thickness of each layer can be easily tuned by controlling the electrospinning parameters. The clear interfacial structure was observed and confirmed by the scanning electron microscope. The bipolar performance is evaluated by the current–voltage curves and production yield of acid and base. The final optimized bipolar membrane had similar yield of acid and base as the casting membrane. However, extremely lower potential drop value was observed when they are applied for the production of acid and base. The experimental results showed that, electrospinning is an effective and well controlled way to fabricate bipolar membranes, in which anion or cation exchange layer as well as interfacial layer can be easily changed or added as requested. - Highlights: • Bipolar membranes were prepared through electrospinning followed by post-treatment. • As-prepared membranes were successfully applied in electrodialysis for production of acid and base. • Electrospun membranes exhibit better performance than the casting ones.

  14. Liposomal preparation by supercritical fluids technology | Zhong ...

    African Journals Online (AJOL)

    African Journal of Biotechnology ... technology (SCF) has been utilized in liposomal preparation because of its friendliness, nontoxicity to the environment and its possibility to achieve solvent-free liposomes and industrial-scale of liposome production under the conditions of current good manufacturing practice (cGMP).

  15. Comparative Models for Preparing Teachers of Minorities.

    Science.gov (United States)

    Titus, Dale; Dolgos, Kathleen

    This paper highlights three programs that prepare culturally sensitive teachers to meet the needs of minority students. The University of Hawaii's Preservice Education for Teachers of Minorities has a partnership with the Kamehameha Schools/Bishop Estate private school for children of Hawaiian ancestry. The school brings new culturally sensitive…

  16. Mechanical site preparation for forest restoration

    Science.gov (United States)

    Magnus Lof; Daniel C. Dey; Rafael M. Navarro; Douglass F. Jacobs

    2012-01-01

    Forest restoration projects have become increasingly common around the world and planting trees is almost always a key component. Low seedling survival and growth may result in restoration failures and various mechanical site preparation techniques for treatment of soils and vegetation are important tools used to help counteract this. In this article, we synthesize the...

  17. The Preparation of School Psychologists in Greece

    Science.gov (United States)

    Hatzichristou, Chryse; Polychroni, Fotini

    2014-01-01

    The paper describes the preparation of school psychologists in Greece. It discusses the social and cultural contexts that have influenced the evolution of the discipline of psychology, the beginning of training programs in school psychology, and the current status of school psychological services. The structure of the Graduate Program of School…

  18. Multicultural Education: Teachers' Perceptions and Preparation

    Science.gov (United States)

    Alismail, Halah Ahmed

    2016-01-01

    This paper focuses on theory and practice in multicultural education as it pertains to the preparation of preservice teachers. The literature reviews the history and definition of multiculturalism and investigates multiple theoretical frameworks around the ongoing debate and issues of multicultural education. Teachers' perceptions of multicultural…

  19. A Paradigm for EST Materials Preparation.

    Science.gov (United States)

    Carreon, Edwina S.; Balarbar, Corazon V.

    In many countries, suitable English for special purposes (ESP) textbooks and materials are difficult to find. ESP teachers and program coordinators often must develop their own materials, but preparing such materials requires training. One model that has served as a guide to numerous ESP materials projects is the Hutchinson and Waters' model. This…

  20. Preparing School Leaders for Educational Change

    Science.gov (United States)

    Granito, John A.

    1972-01-01

    Paper attempts to identify two of the reasons for the slow progress of school superintendents in bringing positive, significant, and lasting improvement to their schools, and to develop a scheme for preparing central staff and school principals for the change process. (Author)

  1. Formulation, Preparation, and Characterization of Polyurethane Foams

    Science.gov (United States)

    Pinto, Moises L.

    2010-01-01

    Preparation of laboratory-scale polyurethane foams is described with formulations that are easy to implement in experiments for undergraduate students. Particular attention is given to formulation aspects that are based on the main chemical reactions occurring in polyurethane production. This allows students to develop alternative formulations to…

  2. Preparing Groups of Engaged Couples for Marriage.

    Science.gov (United States)

    Rolfe, David J.

    This paper outlines a program designed for preparing groups of engaged couples for marriage in circumstances where program time is limited to two afternoon sessions. Six topic areas are covered: Adjustments and Priorities; Communication Skills; Parenthood; Money Management; Religious Dimensions in Marriage; and Sexuality. The method used is one of…

  3. Outsourcing childcare, home cleaning and meal preparation

    NARCIS (Netherlands)

    Cornelisse-Vermaat, J.R.; Ophem, van J.A.C.; Antonides, G.; Maassen van den Brink, H.

    2011-01-01

    In this paper the outsourcing of childcare, home cleaning and meal preparation is analysed by means of a socio-economic model that incorporates household-economic, lifecycle, lifestyle and health variables. The data (n= 700) was collected during a telephone survey in the Netherlands. About 10 per

  4. Preparation, Structure Characterization and Thermal Decomposition ...

    African Journals Online (AJOL)

    NJD

    Decomposition Process of the Dysprosium(III) m-Methylbenzoate 1 ... A dinuclear complex [Dy(m-MBA)3phen]2·H2O was prepared by the reaction of DyCl3·6H2O, m-methylbenzoic acid and .... ing rate of 10 °C min–1 are illustrated in Fig. 4.

  5. Preparation Matters Most in STEM. Issue Brief

    Science.gov (United States)

    Hayes, Shannon

    2017-01-01

    Serious attention has been directed in recent years towards the need for increasing the number of high school graduates in the United States who are prepared for postsecondary education, training and careers in the fields of science, technology, engineering, and mathematics (STEM). The number of jobs in U.S. STEM occupations grew by 10.5 percent…

  6. Simple-to-prepare multipoint field emitter

    Science.gov (United States)

    Sominskii, G. G.; Taradaev, E. P.; Tumareva, T. A.; Mishin, M. V.; Kornishin, S. Yu.

    2015-07-01

    We investigate multitip field emitters prepared by electroerosion treatment of the surface of molybdenum samples. Their characteristics are determined for operation with a protecting activated fullerene coating. Our experiments indicate that such cathodes are promising for high-voltage electron devices operating in technical vacuum.

  7. Preparation and properties of compound Arnebiae radix ...

    African Journals Online (AJOL)

    The aim of this study was to prepare a compound Arnebiae radix microemulsion gel for transdermal delivery system and evaluate its characteristics. Materials and Methods: Based on ... previous used formulations. Keywords: Compound Arnebiae radix oil, microemulsion gel, pseudo-ternary phase diagram, characterization ...

  8. Preparations of spherical polymeric particles from Tanzanian ...

    African Journals Online (AJOL)

    Spherical Polymeric Particles (SPP) have been prepared from Tanzanian Cashew Nut Shell Liquid (CNSL) by suspension polymerization technique involving either step-growth or chain- growth polymerization mechanisms. The sizes of the SPP, which ranged from 0.1 to 2.0 mm were strongly influenced by the amounts of ...

  9. Mandated Preparation Program Redesign: Kentucky Case

    Science.gov (United States)

    Browne-Ferrigno, Tricia

    2013-01-01

    This case study presents a chronicle of events spanning a decade in Kentucky that led to state policy changes for principal preparation and details the response to those mandated changes by professors at the University of Kentucky. Professors' collaborative efforts resulted in a new teacher leadership program and redesigned principal certification…

  10. Preparation of student teachers for multicultural classrooms

    DEFF Research Database (Denmark)

    Petersen, Karen Bjerg

    2017-01-01

    indicate that teachers are in need of professional training to better prepare them for working in multicultural and multilingual classroom settings. The aim of this article is to briefly investigate how curriculum in the 2013 reform of Danish teacher education suggests that student teachers address...

  11. Preparation of bipolar membranes by electrospinning

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Jiefeng; Hou, Linxiao; Wang, Qiuyue; He, Yubin; Wu, Liang; Mondal, Abhishek N.; Xu, Tongwen, E-mail: twxu@ustc.edu.cn

    2017-01-15

    A new preparative pathway for the bipolar membranes was initiated via the electrospinning and hot-press process. The prepared bipolar membrane was consisting of sulfonated poly (phenylene oxide), polyethylene glycol, and quaternized poly (phenylene oxide). The above mentioned membrane was fabricated by the continuous electrospinning of the respective layer, followed by the solvent atmosphere treatment and hot-pressing, to obtain a transparent and dense structure. The thickness of each layer can be easily tuned by controlling the electrospinning parameters. The clear interfacial structure was observed and confirmed by the scanning electron microscope. The bipolar performance is evaluated by the current–voltage curves and production yield of acid and base. The final optimized bipolar membrane had similar yield of acid and base as the casting membrane. However, extremely lower potential drop value was observed when they are applied for the production of acid and base. The experimental results showed that, electrospinning is an effective and well controlled way to fabricate bipolar membranes, in which anion or cation exchange layer as well as interfacial layer can be easily changed or added as requested. - Highlights: • Bipolar membranes were prepared through electrospinning followed by post-treatment. • As-prepared membranes were successfully applied in electrodialysis for production of acid and base. • Electrospun membranes exhibit better performance than the casting ones.

  12. Research Article Preparation and Evaluation of Glibenclamide ...

    African Journals Online (AJOL)

    The effect of stirring speed (250, 1000, 1500 and 2500 rpm) and drug: polymer ratio ... encapsulation efficiency and drug release was also studied. Results: Stable NPs ... Conclusion: Controlled release biodegradable glibenclamide NPs can be efficiently prepared by ... drug delivery, improved bioavailability, stability, and.

  13. Preparing English Language Learners for Complex Reading

    Science.gov (United States)

    Silva, Janice; Delleman, Paul; Phesia, Andria

    2013-01-01

    Although the Common Core state standards' goal of ensuring that every student leaves high school prepared to meet the demands of college and career is laudable, it's daunting for teachers who serve English language learners. The authors, educators at a private bilingual school in Mexico, describe how they used short excerpts of longer works giving…

  14. Method for preparation of uranium hydride

    International Nuclear Information System (INIS)

    Gorski, M.S.; Goncalves, Miriam; Mirage, A.; Lima, W. de.

    1985-01-01

    A method for preparation of Uranium Hydride starting from Hidrogen and Uranium is described. In the temperature range of 250 0 up to 350 0 C, and pressures above 10torr, Hydrogen reacts smoothly with Uranium turnings forming a fine black or dark gray powder (UH 3 ). Samples containing a significant amount of oxides show a delay before the reaction begging. (Author) [pt

  15. Preparing Scientific Papers, Posters, and Slides.

    Science.gov (United States)

    Lefor, Alan Kawarai; Maeno, Misato

    2016-01-01

    Publications and presentations are important in academic medicine. The ability to present information in a standard fashion is critically important. Papers, posters, and slides must be prepared appropriately to maximize their chance of being accepted. The first step is to use word processing software correctly. English language usage must conform to standard scientific English usage. Abbreviations should be avoided as much as possible. Numerical data must be presented with the appropriate number of significant figures. The first step in preparing a paper is to decide the target journal. Papers should always be written in 12 point Times New Roman font, while slides and posters should be in Arial or Helvetica. The Results section must contain actual data with appropriate statistical analysis. Take great care to prepare figures and tables according to the journal's instructions. Posters must be prepared to allow easy reading at a distance of 2m. Use a white background and dark letters. The majority of the area of your poster should be Results, and there is no need to include the abstract or references on a poster. Slide presentations should be limited to about one slide for each minute of the talk. Avoid the use of animations and excessive use of color. Do not use abbreviations on slides. Following these simple guidelines will meet the requirements of most journals and allow your audience to appreciate the data on your posters and slides. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  16. 40 CFR 86.1432 - Vehicle preparation.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Vehicle preparation. 86.1432 Section...) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Emission Regulations for New Gasoline-Fueled Otto-Cycle Light-Duty Vehicles and New Gasoline-Fueled Otto-Cycle Light-Duty...

  17. Spray pyrolysis process for preparing superconductive films

    International Nuclear Information System (INIS)

    Hsu, H.M.; Yee, I.Y.

    1991-01-01

    This paper describes a spray pyrolysis method for preparing thin superconductive film. It comprises: preparing a spray pyrolysis solution comprising Bi,Sr,Ca and Cu metals in a solvent; heating a substrate to a first temperature; spraying the solution onto the heated substrate to form a film thereon; heating the film and substrate to a second temperature of about 700 degrees-825 degrees C, the second temperature being higher than the first temperature; heating the film and substrate to a third temperature of about 870 degrees-890 degrees C to melt the film; once the film and substrate reach the third temperature, further heat treating the film and substrate; cooling the film and substrate to ambient temperature. This patent also describes a spray pyrolysis method for preparing thin superconductive films. It comprises: preparing a spray pyrolysis solution comprising Bi, Ca and Cu metals and fluxing agent in a solvent; heating a substrate to a first temperature; spraying the solution onto the heated substrate to form a film thereon; heating the film and substrate to a second temperature about 700 degrees-825 degrees C, the second temperature being higher than the first temperature; heating the film and substrate at a third temperature about 840 degrees-860 degrees C; and cooling the film and substrate to ambient temperature

  18. Preparation of aluminium lakes by electrocoagulation

    Directory of Open Access Journals (Sweden)

    Prapai Pradabkham

    2008-07-01

    Full Text Available Aluminium lakes have been prepared by electrocoagulation employing aluminium as electrodes. The electrocoagulation is conducted in an aqueous alcoholic solution and is completed within one hour. The dye content in the lake ranges approximately between 4-32%.

  19. Preparation and properties of calcium zirconate

    International Nuclear Information System (INIS)

    Dudek, M.; Bucko, M.; Rog, G.

    2001-01-01

    Dense samples of calcium zirconate were prepared. Electrical conductivity of the samples were measured in the temperature range 873 - 1273 K by both the d.c. four probe and the impedance spectroscopy methods. Calcium zirconate with small excess of calcium oxide appeared to be oxygen ion conductor. It was applied as an electrolyte in solid-state galvanic cells. (author)

  20. L-007: Objectives preparation and Emergency response

    International Nuclear Information System (INIS)

    2011-01-01

    This lecture explains the preparation and response in a nuclear and radiological emergency. Must be taken into consideration a program of preparedness, the public health and environment protection, propagation of contamination limit, first aid and treatment radiation damage, the stochastic, psychological and physical effects reduction

  1. Thermochemical evaluation and preparation of cesium uranates

    Energy Technology Data Exchange (ETDEWEB)

    Takano, Masahide; Minato, Kazuo; Fukuda, Kousaku [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Sato, Seichi; Ohashi, Hiroshi

    1997-03-01

    Two kinds of cesium uranates, Cs{sub 2}UO{sub 4} and Cs{sub 2}U{sub 2}O{sub 7}, which are predicted by thermochemical estimation to be formed in irradiated oxide fuels, were prepared from U{sub 3}O{sub 8} and Cs{sub 2}CO{sub 3} for measurements of the thermal expansions and thermal conductivities. In advance of the preparation, thermochemical calculations for the formation and decomposition of these cesium uranates were performed by Gibbs free energy minimizer. The preparation temperatures for Cs{sub 2}UO{sub 4} and Cs{sub 2}U{sub 2}O{sub 7} were determined from the results of the thermochemical calculations. The prepared samples were analyzed by X-ray diffraction, which showed that the single phases of Cs{sub 2}UO{sub 4} and Cs{sub 2}U{sub 2}O{sub 7} were formed. Thermogravimetry and differential thermal analysis were also performed on these samples, and the decomposition temperatures were evaluated. The experimental results were in good agreement with those of the thermochemical calculations. (author)

  2. Preparation and characterization of titania based nanowires

    International Nuclear Information System (INIS)

    Stengl, Vaclav; Bakardjieva, Snejana; Murafa, Natalie; Vecernikova, Eva; Subrt, Jan; Balek, Vladimir

    2007-01-01

    A new method for preparation of titania nanowires with diameter around 10 nm and length up to 2-3 μm is described. The precursor was prepared from sodium titanate by adding ethylene glycole (EG) and heating at temperature of 198 deg. C for 6 h under reflux. The sodium titanate glycolate formed by this way aggregated into 1D nanostructures and was subsequently transformed into titania glycolate during a chemical treatment with 98% sulfuric acid. Titania nanowires with variable amount of anatase and rutile were prepared by heating to temperatures in the range 350-1000 deg. C. The precursor as well as titania based samples were characterized by X-ray diffraction, Infrared spectroscopy, Scanning electron microscopy, High resolution transmission microscopy, Thermogravimetry, Differential thermal analysis, Evolved gas analysis and Emanation thermal analysis. The nitrogen adsorption/desorption was used for surface area and porosity determination. The photoactivity of the prepared titania samples was assessed by the photocatalytic decomposition of 4-chlorophenol in an aqueous slurry under UV irradiation of 365 nm wavelength

  3. Physicians cannot prepare for nuclear disaster

    International Nuclear Information System (INIS)

    Geiger, H.J.

    1985-01-01

    In this paper, the author argues that medical preparations for nuclear war are futile. Not only would few physicians survive a nuclear attack, but these physicians would have the impossible task of caring for hundreds of thousands of injured and dying victims

  4. Preparation and characterisation of activated carbon

    International Nuclear Information System (INIS)

    Badri bin Muhammad; Karen binti Badri; Mohd Zobir bin Hussein; Zulkarnain bin Zainal; W.M. Daud bin W Yunus; Ramli bin Ibrahim

    1994-01-01

    Activated carbon was prepared from Agricultural wastes, such as coconut shell, Palm oil Shell and mangrove trunk by destructive distillation under vakuum. Chemical and Physical properties of the activated carbon were studied and some potentially useful application in the fields of chemistry was also carried out

  5. Preparing Teachers to Teach Digital Citizenship

    NARCIS (Netherlands)

    Searson, Michael; Voogt, Joke; Whittier, David; Plants, Robert; Gibson, David; Sutton, Bonnie; Ochoa, Marilyn; Sutton, Vic; McBride, Ron; Searson, Michael

    2013-01-01

    A team of SITE leaders was awarded a highly competitive “Digital Citizenship Award” from Facebook to explore the role of digital citizenship in teacher education. The focus of the SITE “Preparing Teachers to Teach Digital Citizenship” project is the development of a college based course, available

  6. 7 CFR 1940.320 - Preparing EISs.

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS (CONTINUED) GENERAL Environmental Program § 1940.320 Preparing EISs. (a) Responsibility. Whenever... implementation of the State's environmental impact analysis requirement, if one has been enacted or promulgated... of the natural and social sciences and the environmental design arts. The disciplines of the...

  7. Batter and method for preparing a pasta

    NARCIS (Netherlands)

    Wind, P.; Linden, van der E.

    2011-01-01

    This invention describes a batter that is suitable for preparing a pasta. The batter comprises water, a starch and a protein, whereby the weight ratio between the protein and the total amount of starch in the batter is represented by the symbol y and whereby the weight percentage of the total amount

  8. Preparing Urban School Leaders: What Works?

    Science.gov (United States)

    Huang, Tiedan; Beachum, Floyd D.; White, George P.; Kaimal, Girija; FitzGerald, Anne Marie; Reed, Peter

    2012-01-01

    Extant research, though limited in quantity, increasingly demonstrates the critical connection between quality preparation experience, candidates' leadership capacity, and their subsequent instructional and transformation leadership practices. Using mixed methods, this study builds on the current knowledge base and aims to further verify the link…

  9. FINANCIAL WORKBOOK Quick Reference -Budget Preparation 1 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alexandra Eustache

    FINANCIAL WORKBOOK. Quick Reference -Budget Preparation. 6. Enter detailed budget notes for each line item. Use the “add new row “ button if more rows are needed. (Refer to page 7 on user guider for more information on budget notes). 7. On the “indirect cost” sheet, enter a fixed percentage or amount(s) a. For fixed ...

  10. Professional Preparation in Physical Education and Coaching.

    Science.gov (United States)

    American Association for Health, Physical Education, and Recreation, Washington, DC.

    This booklet is the product of a conference of the American Association of Health, Physical Education, and Recreation, the purpose of which was to revise professional preparation quidelines in dance, physical education, recreation education, and health and safety education. This report includes sections on physical education and coaching and on…

  11. Preparation of pure phenols from tars

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, J

    1929-06-18

    A process is disclosed for preparing pure phenols from brown coal and shale tar, characterized in that the alkaline extract obtained from the tar is oxidized and concurrently the alkaline solution is separated from the existing impurities by heating with steam at high temperature, which finally reaches at least 150/sup 0/C.

  12. Preparation and Evaluation of Orodispersible Tablets Containing ...

    African Journals Online (AJOL)

    wetting and disintegration times, water absorption, and in vtro dissolution. Results: Increase in ... reagent were purchased from Sigma-Aldrich (St. Louis, MO). ... pressure and the resultant solid dispersions were collected [10]. ... were prepared. Preweighed amount of the ..... It is an ideal choice for low calorie and diabetic ...

  13. Duncan Cites Shortcomings of Teacher Preparation

    Science.gov (United States)

    Sawchuk, Stephen

    2009-01-01

    In what had been billed as a major speech on teacher education, U.S. Secretary of Education Arne Duncan last week reiterated concerns about the quality of the schools that produce a majority of the nation's teachers. But some observers said that by praising several new teacher-preparation initiatives, he struck a more conciliatory tone toward the…

  14. An improved calcium chloride method preparation and ...

    African Journals Online (AJOL)

    Transformation is one of the fundamental and essential molecular cloning techniques. In this paper, we have reported a modified method for preparation and transformation of competent cells. This modified method, improved from a classical protocol, has made some modifications on the concentration of calcium chloride ...

  15. Albendazole Microparticles Prepared by Spray Drying Technique ...

    African Journals Online (AJOL)

    Purpose: To enhance the dissolution of albendazole (ABZ) using spray-drying technique. Method: ABZ binary mixtures with Kollicoat IR® (KL) and polyvinyl pyrrolidone (PVP) in various drug to polymer ratios (1: 1, 1: 2 and 1; 4) were prepared by spray-drying. The spray-dried particles were characterized for particle shape, ...

  16. Preparing for the biggest experiment on earth

    CERN Multimedia

    2007-01-01

    "An international team of over 2'000 scientists, led by Professor Tejinder Virdee from Imperial College London's Department of Physics is stepping up preparations for the world's largest ever physics experiment, starting next year at CERN near Geneva, Switzerland." (1 page)

  17. Personal Values: Psychological Determinants of Retirement Preparation.

    Science.gov (United States)

    Price, William F.

    With the trend toward early retirement and the fact that people are living to an older average age, more years of an individual's life will be spent in retirement. To examine personal values as psychological determinants of the retirement preparation process, 206 classified university employees, between the ages of 50 and 65 years of age,…

  18. Amorphous bimetallic alloys prepared by steam condensation

    International Nuclear Information System (INIS)

    Drago, V.

    1988-01-01

    Amorphous alloys of MnSn are prepared by steam condensation, in a substratum with a temperature near of the liquid helium. The magnetic and paramagnetic hyperfine spectrum and the ordination temperature by Moessbauer effect 119Sn are measured. A diagram of magnetic phase is proposed, basing on the measures of Moessbauer effect. (C.G.C.) [pt

  19. Return on investment (ROI) proposal preparation guide

    International Nuclear Information System (INIS)

    BOOM, R.J.

    1999-01-01

    Section I: Background Return on Investment (ROI) Proposal Preparation Guide-- Over $1.9M is available to fund fiscal year (FY) 2000 waste minimization projects on the Hanford Site. This money was allocated by the US. Department of Energy Headquarters (DOE-HQ). The U.S. Department of Energy, Richland Operations (RL) and the U.S. Department of Energy, Office of River Protection (ORP) are currently seeking pollution prevention proposals from across the Hanford Site that provide a high return-on-investment (ROI) by reducing waste and associated management costs. Purpose of ROI Training The ROI Proposal Preparation Guide is a tool to assist Hanford waste generators in preparing ROI proposal forms for submittal to RL for funding. The guide describes the requirements for submitting an ROI proposal and provides examples of completed ROI forms. The intent is to assist waste generators in identifying projects that meet the criteria, provide information necessary to complete the ROI forms, and submit a proposal that is eligible to receive funding. This guide accompanies the one-hour training workshop on how to prepare and submit an ROI proposal

  20. Preparation of Natural and Synthetic Porous Biodegradable ...

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Preparation of Natural and Synthetic Porous Biodegradable Scaffolds for Infected Wounds. Characterised for their physical properties, pore size and release kinetics. Release kinetics of bioactive molecules (antibiotics) in a controlled fashion. Release pattern of the ...

  1. Mechanical bowel preparation for elective colorectal surgery

    DEFF Research Database (Denmark)

    Güenaga, Katia F; Matos, Delcio; Wille-Jørgensen, Peer

    2011-01-01

    The presence of bowel contents during colorectal surgery has been related to anastomotic leakage, but the belief that mechanical bowel preparation (MBP) is an efficient agent against leakage and infectious complications is based on observational data and expert opinions only.An enema before...

  2. Techniques for preparation prior to embryo transfer

    NARCIS (Netherlands)

    Derks, Roos S.; Farquhar, Cindy; Mol, Ben Willem J.; Buckingham, Karen; Heineman, Maas Jan

    2009-01-01

    BACKGROUND: Embryo transfer (ET) is the final and most vulnerable step in in vitro fertilisation (IVF) treatment. Pregnancy rates after ET may be influenced by several factors including cervical preparation, the performance of a dummy or mock transfer, the choice of catheter, the use of ultrasound

  3. Modelling preparation and consumption of pork products

    DEFF Research Database (Denmark)

    Swart, Arno; Nauta, Maarten; Evers, Eric

    is thoroughly mixed, and Salmonellae may be present in the interior of hamburger patties, undercooking may occur, and Salmonellae may survive. Dry cured sausages, including all variations therein like chorizo, salami, etc., are eaten uncooked. Food preparation habits are highly variable and accurate data...

  4. Application of thermotolerant microorganisms for biofertilizer preparation.

    Science.gov (United States)

    Chen, Kuo-Shu; Lin, Yann-Shying; Yang, Shang-Shyng

    2007-12-01

    Intensive agriculture is practised in Taiwan, and compost application is very popular as a means of improving the soil physical properties and supplying plant nutrition. We tested the potential of inoculation with thermotolerant microorganisms to shorten the maturity and improve the quality of biofertilizer prepared by composting. Thermotolerant microorganisms were isolated from compost and reinoculated for the preparation of biofertilizer. The physical, chemical and biological properties of the biofertilizer were determined during composting. The effects of biofertilizer application on the growth and yield of rape were also studied. Among 3823 colonies of thermotolerant microorganisms, Streptomyces thermonitrificans NTU-88, Streptococcus sp. NTU-130 and Aspergillus fumigatus NTU-132 exhibited high growth rates and cellulolytic and proteolytic activities. When a mixture of rice straw and swine manure were inoculated with these isolates and composted for 61 days, substrate temperature increased initially and then decreased gradually during composting. Substrate pH increased from 7.3 to 8.5. Microbial inoculation enhanced the rate of maturity, and increased the content of ash and total and immobilized nitrogen, improved the germination rate of alfalfa seed, and decreased the content of total organic carbon and the carbon/nitrogen ratio. Biofertilizer application increased the growth and yield of rape. Inoculation of thermotolerant and thermophilic microorganisms to agricultural waste for biofertilizer preparation enhances the rate of maturity and improves the quality of the resulting biofertilizer. Inoculation of appropriate microorganisms in biofertilizer preparation might be usefully applied to agricultural situations.

  5. Translanguaging in English Academic Writing Preparation

    Science.gov (United States)

    Adamson, John; Coulson, David

    2015-01-01

    We investigate translanguaging (i.e. the co-use of first and second languages) in a Content and Language Integrated Learning course, as a pragmatic means to promote the skill of young university students in extended critical academic writing. We aimed to prepare new undergraduate students (n = 180) for courses where partial English-medium…

  6. Superconductors preparation process and products obtained

    International Nuclear Information System (INIS)

    Lafon, M.O.; Magnier, C.

    1989-01-01

    A superconducting fine powder is prepared by mixing a rare earth sol with a solution of at least an alkaline earth nitrate and at least a transition metal nitrate, the pH is fixed for the said nitrates to stay in solution. The mixture is dried, calcined and eventually crushed [fr

  7. Preparation of a 102Rh tracer

    International Nuclear Information System (INIS)

    Gorski, B.; Heinig, W.

    1986-01-01

    Electronic emission detectors used in reactors for the control of the neutron flux density contain rhodium as an emitter material. By dissolving the emitter material in a mixture of hydrobromic acid and bromine it is possible to get 102 Rh labelled solutions of the spent detectors. The preparation and purification of the solutions are described. (author)

  8. Educational preparation to strengthen nursing leadership.

    Science.gov (United States)

    Scott, Elaine S

    2011-01-01

    Two of the 8 recommendations in the Institute of Medicine of the National Academies report on the future of nursing call for increased leadership by nurses. While nurses alone cannot transform health care, they do need a stronger voice in health care systems, and they need better educational preparation as members of the health care leadership team.

  9. How Not to Prepare School Principals

    Science.gov (United States)

    Davis, Stephen H.; Leon, Ronald J.

    2011-01-01

    Instead of focusing on how principals should be trained, an contrarian view is offered, grounded upon theoretical perspectives of experiential learning, and in particular, upon the theory of andragogy. A brief parable of the DoNoHarm School of Medicine is used as a descriptive analog for many principal preparation programs in America. The…

  10. Preparation of gold nanoparticles for plasmonic applications

    Energy Technology Data Exchange (ETDEWEB)

    Benkovicova, Monika, E-mail: monika.benkovicova@savba.sk [Institute of Physics SAS, Dubravska cesta 9, 845 11 Bratislava (Slovakia); Polymer Institute SAS, Dubravska cesta 9, 845 41 Bratislava (Slovakia); Vegso, Karol; Siffalovic, Peter; Jergel, Matej; Luby, Stefan; Majkova, Eva [Institute of Physics SAS, Dubravska cesta 9, 845 11 Bratislava (Slovakia)

    2013-09-30

    We present a simple hot injection method for the preparation of colloidal solutions of hydrophobic spherical gold nanoparticles with the diameter around 20 nm and size dispersion below 20%. Various surfactants with different lengths of hydrocarbon chains, such as oleylamine, 1-octadecanethiol, poly (N-vinylpyrrolidone), and AgNO{sub 3} in 1,5-pentanediol, were used for sterical stabilization in the colloidal solution. The hydrodynamic nanoparticle size and size dispersion were determined by the dynamic light scattering (DLS) while the small-angle X-ray scattering (SAXS) from the colloidal solution provided information on the size of the metallic nanoparticle core (without surfactant). Plasmon enhanced resonant absorption peaks between 500 nm and 600 nm were detected by the UV–VIS spectrophotometry. The nanoparticle arrays on silicon prepared by solvent evaporation or Langmuir-Schaefer method were inspected by high-resolution scanning electron microscopy and grazing-incidence SAXS (GISAXS). The presence of side maxima in the GISAXS pattern gives evidence of the nanoparticle ordering by self-assembly while very close values of the interparticle distance derived from GISAXS and the nanoparticle size derived from DLS indicate a close-packed order. - Highlights: ► Preparation of gold nanoparticles by use a various of surfactants ► Preparation of monodisperse nanoparticles ► Characterization of nanoparticles on a solid substrate.

  11. Gastroretentive Floating Microspheres of Silymarin: Preparation and ...

    African Journals Online (AJOL)

    Methods: Cellulose microspheres – formulated with hydroxylpropyl methylcellulose (HPMC) and ethyl cellulose (EC) – and Eudragit microspheres – formulated with Eudragit® S 100 (ES) and Eudragit® RL (ERL) - were prepared by an emulsion-solvent evaporation method. The floating microspheres were evaluated for flow ...

  12. The influence of school leadership preparation programmes ...

    African Journals Online (AJOL)

    The Higher Education Quality Committee (HEQC) is responsible for the accreditation of public and private institutions and their learning programmes in South Africa. This body has identified a number of criteria in order to determine the effectiveness of school leadership preparation programmes. One of them focuses on the ...

  13. Studies of radiolabelled preparations in the rabbit

    International Nuclear Information System (INIS)

    Wilson, C.G.; Hardy, J.G.

    1982-01-01

    Rabbits are used to investigate the dose-response relationship of radiopharmaceuticals. The relationship can be divided into three phases:- (i) Pharmaceutical, covering the rate of release of the drug from the preparation. (ii) Pharmacokinetic, comprising processes of absorption, distribution and metabolism. (iii) Pharmacodynamic, interaction of the drug with the receptor site. (U.K.)

  14. Successful Innovations in Educational Leadership Preparation

    Science.gov (United States)

    Gordon, Stephen P.; Oliver, John; Solis, Rachel

    2016-01-01

    The purpose of this study was to identify and describe successful innovations in educational leadership preparation programs. Professors of educational leadership from across the nation nominated innovations of 12 programs. Based on review of descriptions of the innovations provided by nominees, further documentation on the innovations was…

  15. Magnetic hyaluronate hydrogels: preparation and characterization

    International Nuclear Information System (INIS)

    Tóth, Ildikó Y.; Veress, Gábor; Szekeres, Márta; Illés, Erzsébet; Tombácz, Etelka

    2015-01-01

    A novel soft way of hyaluronate (HyA) based magnetic hydrogel preparation was revealed. Magnetite nanoparticles (MNPs) were prepared by co-precipitation. Since the naked MNPs cannot be dispersed homogenously in HyA-gel, their surface was modified with natural and biocompatible chondroitin-sulfate-A (CSA) to obtain CSA-coated MNPs (CSA@MNPs). The aggregation state of MNPs and that loaded with increasing amount of CSA up to 1 mmol/g was measured by dynamic light scattering at pH~6. Only CSA@MNP with ≥0.2 mmol/g CSA content was suitable for magnetic HyA-gel preparation. Rheological studies showed that the presence of CSA@MNP with up to 2 g/L did not affect the hydrogel's rheological behavior significantly. The results suggest that the HyA-based magnetic hydrogels may be promising formulations for future biomedical applications, e.g. as intra-articular injections in the treatment of osteoarthritis. - Highlights: • Novel hyaluronate(HyA)-based biocompatible magnetic hydrogels were prepared. • Chondroitin-sulfate-A coating is needed to disperse magnetite particles in HyA-gel. • Rheological behavior of hydrogels was independent of the magnetite content (<2 g/L). • Gels remained in stable and homogeneously dispersed state even after 90 days storage. • Magnetic HyA-gels are promising candidates for use as intra-articular injection

  16. Magnetic hyaluronate hydrogels: preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Tóth, Ildikó Y., E-mail: Ildiko.Toth@chem.u-szeged.hu; Veress, Gábor; Szekeres, Márta; Illés, Erzsébet; Tombácz, Etelka, E-mail: tombacz@chem.u-szeged.hu

    2015-04-15

    A novel soft way of hyaluronate (HyA) based magnetic hydrogel preparation was revealed. Magnetite nanoparticles (MNPs) were prepared by co-precipitation. Since the naked MNPs cannot be dispersed homogenously in HyA-gel, their surface was modified with natural and biocompatible chondroitin-sulfate-A (CSA) to obtain CSA-coated MNPs (CSA@MNPs). The aggregation state of MNPs and that loaded with increasing amount of CSA up to 1 mmol/g was measured by dynamic light scattering at pH~6. Only CSA@MNP with ≥0.2 mmol/g CSA content was suitable for magnetic HyA-gel preparation. Rheological studies showed that the presence of CSA@MNP with up to 2 g/L did not affect the hydrogel's rheological behavior significantly. The results suggest that the HyA-based magnetic hydrogels may be promising formulations for future biomedical applications, e.g. as intra-articular injections in the treatment of osteoarthritis. - Highlights: • Novel hyaluronate(HyA)-based biocompatible magnetic hydrogels were prepared. • Chondroitin-sulfate-A coating is needed to disperse magnetite particles in HyA-gel. • Rheological behavior of hydrogels was independent of the magnetite content (<2 g/L). • Gels remained in stable and homogeneously dispersed state even after 90 days storage. • Magnetic HyA-gels are promising candidates for use as intra-articular injection.

  17. Towards a Philosophy of Music Teacher Preparation.

    Science.gov (United States)

    Parr, N. Carlotta

    1999-01-01

    Summarizes six principles that might serve as a theoretical framework supporting a new vision for the purposes and processes of music teacher preparation. Draws the principles from the conceptions of learning and teaching of Jerome Bruner, Maxine Greene, and Vernon A. Howard. Provides background information on their ideas. (CMK)

  18. Disaster Preparation and Recovery - Multiple Languages

    Science.gov (United States)

    ... MedlinePlus Search Search MedlinePlus GO GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools You Are Here: Home → Multiple Languages → All Health Topics → Disaster Preparation and Recovery URL of this page: https:// ...

  19. Process of preparing tritiated porous silicon

    Science.gov (United States)

    Tam, Shiu-Wing

    1997-01-01

    A process of preparing tritiated porous silicon in which porous silicon is equilibrated with a gaseous vapor containing HT/T.sub.2 gas in a diluent for a time sufficient for tritium in the gas phase to replace hydrogen present in the pore surfaces of the porous silicon.

  20. Process for the preparation of uranium dioxide

    International Nuclear Information System (INIS)

    Watt, G.W.; Baugh, D.W. Jr.

    1981-01-01

    A method for the preparation of actinide dioxides using actinide nitrate hexahydrates as starting materials is described. The actinide nitrate hexahydrate is reacted with sodium dithionite, and the product is heated in the absence of oxygen to obtain the dioxide. Preferably, the actinide is uranium, plutonium or neptunium. (LL)

  1. Low platinum catalyst and method of preparation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Di-Jia; Chong, Lina

    2017-11-21

    A low platinum catalyst and method for making same. The catalyst comprises platinum-transition metal bimetallic alloy microcrystallites over a transition metal-nitrogen-carbon composite. A method of making a catalyst comprises preparation of transition metal organic frameworks, infusion of platinum, thermal treatment, and reduction to form the microcrystallites and composite.

  2. Retirement Counseling: Preparing for the "Golden Years."

    Science.gov (United States)

    Zuehlsdorff, Harry W.; Baldwin, Cynthia

    Preparing for retirement can sometimes be problematic since it means that one is aging and moving into another life cycle change. This paper will review some factors to consider in making the transition a more positive experience. The impact of retirement on older citizens is frequently neglected in the counseling arena. In the current youth…

  3. Food Preparation and Service: Cluster Guide.

    Science.gov (United States)

    Central Michigan Univ., Mount Pleasant.

    This teacher's guide is one of a series of publications focusing on the occupational preparation of persons with special education needs. The material was developed and tested by cooperating teachers over a period of three years. Task analysis information is presented using occupational descriptions from the Dictionary of Occupational Titles,…

  4. Preparation and control of radiopharmaceuticals in hospitals

    International Nuclear Information System (INIS)

    Kristensen, K.

    1979-01-01

    This guidebook covers the work commonly organized as part of the work in the hospital. It does not cover the manufacture of radiopharmaceuticals on an industrial scale. The work is characterized by the small scale on which manufacture and preparation of radiopharmaceuticals take place

  5. Data preparation for the computer code FLIRT

    Energy Technology Data Exchange (ETDEWEB)

    Veale, M E.R.; Wrigley, H E [General Reactor Physics Division, Atomic Energy Establishment, Winfrith, Dorchester, Dorset (United Kingdom)

    1964-08-15

    The report describes the data preparation for the reactor transient programme FLIRT, and the method of operation of the programme. It includes examples of both input and output for a typical transient calculation. It also includes a section on the numerical techniques used to increase the speed of solution. (author)

  6. Anticancer effect of a Kampo preparation Daikenchuto.

    Science.gov (United States)

    Nagata, Takuya; Toume, Kazufumi; Long, Lv Xiao; Hirano, Katsuhisa; Watanabe, Toru; Sekine, Shinichi; Okumura, Tomoyuki; Komatsu, Katsuko; Tsukada, Kazuhiro

    2016-07-01

    No traditional Japanese and Chinese herbal preparations have been shown to be effective antitumor agents, and a Japanese herbal therapy (Kampo medicine) for cancer that causes fewer adverse drug reactions than orthodox pharmaceuticals is desired. Our present study demonstrated that a Kampo preparation Daikenchuto (DKT) exerts an antitumor effect against various cancer cells. We also discovered an antitumor factor in Japanese Zanthoxylum peel, which is an ingredient of DKT. Breast, esophageal, gastric, and colon cancer cell lines were individually incubated with DKT for 1-72 h, followed by assessment of tumor growth inhibition by MTT assay. The cancer cells were also analyzed for apoptotic changes after DKT treatment. Nude mice were used to establish a model of gastric cancer tumor growth and peritoneal disseminated metastasis, in which the number of peritoneal disseminations was evaluated after oral administration of DKT for 4 weeks. In addition, the antitumor effects of the individual DKT ingredients (viz., ginseng, Japanese Zanthoxylum peel, and processed ginger) and other Kampo preparations were also analyzed. The antitumor effect of DKT was demonstrated in gastric, breast, esophageal, and colon cancer cells. DKT treatment induced apoptosis in these cells. Oral administration of DKT had a tendency to reduce the growth and significantly reduced the peritoneal dissemination of gastric cancer in the nude mouse model compared with control. DKT exhibited a higher antitumor effect than other Kampo preparations. Furthermore, Japanese Zanthoxylum peel, an ingredient of DKT, showed a particularly potent antitumor effect. Our study indicated that DKT is useful as a Kampo preparation for cancer therapy. We also showed that Japanese Zanthoxylum peel, an ingredient of DKT, contains an antitumor factor.

  7. Bowel preparations for colonoscopy: an RCT.

    Science.gov (United States)

    Di Nardo, Giovanni; Aloi, Marina; Cucchiara, Salvatore; Spada, Cristiano; Hassan, Cesare; Civitelli, Fortunata; Nuti, Federica; Ziparo, Chiara; Pession, Andrea; Lima, Mario; La Torre, Giuseppe; Oliva, Salvatore

    2014-08-01

    The ideal preparation regimen for pediatric colonoscopy remains elusive, and available preparations continue to represent a challenge for children. The aim of this study was to compare the efficacy, safety, tolerability, and acceptance of 4 methods of bowel cleansing before colonoscopy in children. This randomized, investigator-blinded, noninferiority trial enrolled all children aged 2 to 18 years undergoing elective colonoscopy in a referral center for pediatric gastroenterology. Patients were randomly assigned to receive polyethylene glycol (PEG) 4000 with simethicon (PEG-ELS group) or PEG-4000 with citrates and simethicone plus bisacodyl (PEG-CS+Bisacodyl group), or PEG 3350 with ascorbic acid (PEG-Asc group), or sodium picosulfate plus magnesium oxide and citric acid (NaPico+MgCit group). Bowel cleansing was evaluated according to the Boston Bowel Preparation Scale. The primary end point was overall colon cleansing. Tolerability, acceptability, and compliance were also evaluated. Two hundred ninety-nine patients were randomly allocated to the 4 groups. In the per-protocol analysis, PEG-CS+Bisacodyl, PEG-Asc, and NaPico+MgCit were noninferior to PEG-ELS in bowel-cleansing efficacy of both the whole colon (P = .910) and colonic segments. No serious adverse events occurred in any group. Rates of tolerability, acceptability, and compliance were significantly higher in the NaPico+MgCit group. Low-volume PEG preparations (PEG-CS+Bisacodyl, PEG-Asc) and NaPico+MgCit are noninferior to PEG-ELS in children, representing an attractive alternative to high-volume regimens in clinical practice. Because of the higher tolerability and acceptability profile, NaPico+MgCit would appear as the most suitable regimen for bowel preparation in children. Copyright © 2014 by the American Academy of Pediatrics.

  8. Stability of an extemporaneously prepared tadalafil suspension.

    Science.gov (United States)

    Pettit, Rebecca S; Johnson, Cary E; Caruthers, Regine L

    2012-04-01

    The stability of an extemporaneously prepared tadalafil oral suspension was studied. An oral suspension of tadalafil 5 mg/mL was prepared by thoroughly grinding 15 20-mg tadalafil tablets in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of Ora-Sweet were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored at room temperature (23-25 °C). A 1-mL sample was withdrawn from each of the three bottles with a micropipette immediately after preparation and at 7, 14, 28, 57, and 91 days. After double dilution (1:10 and 0.1:5 v/v) to an expected concentration of 10 μg/mL with methanol and mobile phase, respectively, the samples were assayed in duplicate using stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and evaluated for pH changes on each day of analysis. Taste evaluation was performed at the beginning and end of the study. Stability was defined as the retention of at least 90% of the initial concentration. At least 99% of the initial tadalafil concentration remained throughout the 91-day study period. There were no detectable changes in color, odor, taste, and pH, and no visible microbial growth was observed in any sample. An extemporaneously prepared suspension of tadalafil 5 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet was stable for at least 91 days when stored in amber plastic bottles at room temperature.

  9. Stability of extemporaneously prepared moxifloxacin oral suspensions.

    Science.gov (United States)

    Hutchinson, David J; Johnson, Cary E; Klein, Kristin C

    2009-04-01

    The stability of extemporaneously prepared moxifloxacin oral suspensions was studied. An oral suspension of moxifloxacin 20 mg/mL was prepared by thoroughly grinding three 400-mg tablets of moxifloxacin in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of each formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and were stored at room temperature (23-25 degrees C). A 1-mL sample was withdrawn from each of the six bottles with a micropipette immediately after preparation and at 7, 14, 28, 60, and 90 days. After further dilution to an expected concentration of 8 microg/ mL with sample diluent, the samples were assayed in duplicate by stability-indicating high-performance liquid chromatography. Stability was defined as the retention of at least 90% of the initial concentration. At least 99% of the initial moxifloxacin remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH and no visible microbial growth in any sample. Extemporaneously compounded suspensions of moxifloxacin 20 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet or Ora-Sweet SF were stable for at least 90 days when stored in 2-oz amber plastic bottles at room temperature.

  10. Stability of extemporaneously prepared glycopyrrolate oral suspensions.

    Science.gov (United States)

    Cober, Mary Petrea; Johnson, Cary E; Sudekum, David; Penprase, Kimberly

    2011-05-01

    The stability of extemporaneously prepared glycopyrrolate 0.5-mg/mL suspensions was evaluated. An oral suspension of glycopyrrolate 0.5 mg/mL was prepared by thoroughly grinding 30 1-mg tablets of glycopyrrolate in a glass mortar. Thirty milliliters of Ora-Plus and 30 mL of either Ora-Sweet or Ora-Sweet SF were mixed and added to the powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored at room temperature (23-25 °C). A 1-mL sample was withdrawn from each of the three bottles with a micropipette immediately after preparation and 7, 15, 30, 60, and 90 days afterward. After further dilution to an expected concentration of 50 μg/mL with sample diluent, the samples were assayed in duplicate by stability-indicating high-performance liquid chromatography. The samples were visually examined for any color change and evaluated for pH on each day of analysis. Taste evaluations were performed at the beginning and end of the study. Stability was defined as the retention of at least 90% of the initial concentration. At least 95% of the initial glycopyrrolate remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH, and no visible microbial growth was observed in any sample. Extemporaneously compounded suspensions of glycopyrrolate 0.5 mg/mL in a 1:1 mixture of Ora-Plus/Ora-Sweet or Ora-Plus/Ora-Sweet SF were stable for at least 90 days when stored in amber plastic bottles at room temperature.

  11. Case study: Natural bodybuilding contest preparation.

    Science.gov (United States)

    Kistler, Brandon M; Fitschen, Peter J; Ranadive, Sushant M; Fernhall, Bo; Wilund, Kenneth R

    2014-12-01

    The purpose of this study was to document the physiological changes that occur in a natural bodybuilder during prolonged contest preparation for a proqualifying contest. During the 26-week preparation, the athlete undertook a calorically restrictive diet with 2 days of elevated carbohydrate intake per week, increased cardiovascular (CV) training, and attempted to maintain resistance-training load. The athlete was weighed twice a week and body composition was measured monthly by DXA. At baseline and every 2 weeks following CV structure and function was measured using a combination of ultrasound, applanation tonometry, and heart rate variability (HRV). Cardiorespiratory performance was measured by VO(2)peak at baseline, 13 weeks, and 26 weeks. Body weight (88.6 to 73.3 Kg, R(2) = .99) and percent body fat (17.5 to 7.4%) were reduced during preparation. CV measurements including blood pressure (128/61 to 113/54 mmHg), brachial pulse wave velocity (7.9 to 5.8m/s), and measures of wave reflection all improved. Indexed cardiac output was reduced (2.5 to 1.8L/m(2)) primarily due to a reduction in resting heart rate (71 to 44 bpm), and despite an increase in ejection faction (57.9 to 63.9%). Assessment of HRV found a shift in the ratio of low to high frequency (209.2 to 30.9%). Absolute VO2 was minimally reduced despite weight loss resulting in an increase in relative VO2 (41.9 to 47.7 ml/Kg). In general, this prolonged contest preparation technique helped the athlete to improve body composition and resulted in positive CV changes, suggesting that this method of contest preparation appears to be effective in natural male bodybuilders.

  12. 48 CFR 252.237-7011 - Preparation history.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Preparation history. 252... Provisions And Clauses 252.237-7011 Preparation history. As prescribed in 237.7003(b), use the following clause: Preparation History (DEC 1991) For each body prepared, or for each casket handled in a group...

  13. 30 CFR 827.12 - Coal preparation plants: Performance standards.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal preparation plants: Performance standards...-COAL PREPARATION PLANTS NOT LOCATED WITHIN THE PERMIT AREA OF A MINE § 827.12 Coal preparation plants..., modification, reclamation, and removal activities at coal preparation plants shall comply with the following...

  14. Effect of preparation conditions on physicochemical, surface and catalytic properties of cobalt ferrite prepared by coprecipitation

    Energy Technology Data Exchange (ETDEWEB)

    El-Shobaky, G.A., E-mail: elshobaky@yahoo.co [Physical Chemistry Department, National Research Center, Dokki, Cairo (Egypt); Turky, A.M.; Mostafa, N.Y.; Mohamed, S.K. [Chemistry Department, Faculty of Science, Suez Canal University, Ismailia 41522 (Egypt)

    2010-03-18

    Cobalt ferrite nanoparticles were prepared via thermal treatment of cobalt-iron mixed hydroxides at 400-600 {sup o}C. The mixed hydroxides were coprecipitated from their nitrates solutions using NaOH as precipitating agent. The effects of pH and temperature of coprecipitation and calcination temperature on the physicochemical, surface and catalytic properties of the prepared ferrites were studied. The prepared systems were characterized using TG, DTG, DTA, chemical analysis, atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), energy dispersive X-ray (EDX) as well as surface and texture properties based on nitrogen adsorption-desorption isotherms. The prepared cobalt ferrites were found to be mesoporous materials that have crystallite size ranges between 8 and 45 nm. The surface and catalytic properties of the produced ferrite phase were strongly dependent on coprecipitation conditions of the mixed hydroxides and on their calcination temperature.

  15. Standard guide for preparation of metallographic specimens

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 The primary objective of metallographic examinations is to reveal the constituents and structure of metals and their alloys by means of a light optical or scanning electron microscope. In special cases, the objective of the examination may require the development of less detail than in other cases but, under nearly all conditions, the proper selection and preparation of the specimen is of major importance. Because of the diversity in available equipment and the wide variety of problems encountered, the following text presents for the guidance of the metallographer only those practices which experience has shown are generally satisfactory; it cannot and does not describe the variations in technique required to solve individual specimen preparation problems. Note 1—For a more extensive description of various metallographic techniques, refer to Samuels, L. E., Metallographic Polishing by Mechanical Methods, American Society for Metals (ASM) Metals Park, OH, 3rd Ed., 1982; Petzow, G., Metallographic Etchin...

  16. Preparation and nucleation of spherical metallic droplet

    Directory of Open Access Journals (Sweden)

    Bing-ge Zhao

    2015-03-01

    Full Text Available The preparation and solidification of metallic droplets attract more and more attention for their significance in both engineering and scientific fields. In this paper, the preparation and characterization of Sn-based alloy droplets using different methods such as atomization and consumable electrode direct current arc (CDCA technique are reviewed. The morphology and structure of these droplets were determined by optical microscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The solidification behavior of single droplet was systematically studied by means of scanning calorimetry (DSC, and the nucleation kinetics was also calculated. In particular, the development of fast scanning calorimetry (FSC made it possible to investigate the evolution of undercooling under ultrafast but controllable heating and cooling conditions. The combination of CDCA technique and FSC measurements opens up a new door for quantitative studies on droplet solidification, which is accessible to demonstrate some theories by experiments.

  17. Preparation of ceramic materials for surface characterization

    International Nuclear Information System (INIS)

    Zipperian, D.C.

    1989-01-01

    This paper discusses how microstructural preparation permits a microscopic analysis of a material's internal structure, which is related to the physical properties of the material. Today, numerous microstructural quantitative and qualitative measurements are commonly utilized. Several of these include phase determination, phase hardness, phase distribution, grain size and shape, and porosity and size distribution. The most widely used surface characterization techniques are optical microscopy, electron microscopy, and x-ray microscopy. Optical microscopy includes both transmitted-and reflected-light techniques and requires a surface preparation prior to analysis. Transmitted-light microscopy samples require thinning and polishing of both sides of the sample, whereas reflected light techniques require polishing of only one side of the sample

  18. Preparation and quality control of ECD kit

    International Nuclear Information System (INIS)

    Yassin, T.; Dadokh, M.; Almalki, R.

    2005-05-01

    ECD Kit for brain imaging after labeling with technetium 99m was prepared according to an optimum conditions, Each vial contains 1 mg of ECD and 0.155 mg of stannous chloride anhydrous SnCl 2 , 24 mg of Mannitol and 0.5 mg of Na 2 Ca EDTA, The prepared kit showed high quality satisfying the requirements of international pharmacopoeias from the points of physical, chemical, radiochemical and biological purities, and its validity for human injection. And the labeling yield exceeded 95 % with average value of about 97.63 ± 0.89% for 2mCi /2ml radioactivity , This study also showed that each vial content can be labeled with maximum activity of 99m Tc of about 50 mCi (Authors)

  19. Preparation of fullerene/glass composites

    Science.gov (United States)

    Mattes, Benjamin R.; McBranch, Duncan W.; Robinson, Jeanne M.; Koskelo, Aaron C.; Love, Steven P.

    1995-01-01

    Synthesis of fullerene/glass composites. A direct method for preparing solid solutions of C.sub.60 in silicon dioxide (SiO.sub.2) glass matrices by means of sol-gel chemistry is described. In order to produce highly concentrated fullerene-sol-gel-composites it is necessary to increase the solubility of these "guests" in a delivery solvent which is compatible with the starter sol (receiving solvent). Sonication results in aggregate disruption by treatment with high frequency sound waves, thereby accelerating the rate of hydrolysis of the alkoxide precursor, and the solution process for the C.sub.60. Depending upon the preparative procedure, C.sub.60 dispersed within the glass matrix as microcrystalline domains, or dispersed as true molecular solutions of C.sub.60 in a solid glass matrix, is generated by the present method.

  20. IT disaster recovery: are you prepared?

    Science.gov (United States)

    Donley, Elizabeth

    2007-10-01

    New Web technologies provide new opportunities but also include new risks. In an article in the May 2003 edition of Harvard Business Review, Editor Nicolas G. Carr said, "executives need to shift their attention from IT opportunities to IT risks-from offense to defense." That's probably a bit extreme. A better approach is to look at IT the same way you look at any business proposition. Every decision should be an informed decision. You should weigh the opportunities against the risks in order to select the best option. Then, once you have made your decision, take the necessary steps to minimize and prepare for the risks. This includes preparing for whatever disaster may come your way.

  1. Preparation of oxide materials from metal alkoxides

    International Nuclear Information System (INIS)

    Turevskaya, E.P.; Turova, N.Ya.; Yanovskaya, M.I.

    2000-01-01

    The results of studies on the sol-gel technologies on the basis of alkoxides are presented. The synthesis and properties of titanates zirconates, niobates, tantalates, vanadates and solid solutions on the basis of Mo, W and Bi oxides, iron oxides and high-temperature superconductors are presented. The most important aspects, determining the choice of optimal conditions for preparation of oxides of concrete compositions with required properties are pointed out. Accomplishment of the whole chain of studies made it possible to synthesize a broad range of metal alkoxides and study their properties and also carry out large-scale studies on preparation of various oxides and materials on the basis thereof, using the source base of the sol-gel method [ru

  2. Molten salt processes in special materials preparation

    International Nuclear Information System (INIS)

    Krishnamurthy, N.; Suri, A.K.

    2013-01-01

    As a class, molten salts are the largest collection of non aqueous inorganic solvents. On account of their stability at high temperature and compatibility to a number of process requirements, molten salts are considered indispensable to realize many of the numerous benefits of high temperature technology. They play a crucial role and form the basis for numerous elegant processes for the preparation of metals and materials. Molten salt are considered versatile heat transfer media and have led to the evolution of many interesting reactor concepts in fission and possibly in fusion. They also have been the basis of thinking for few novel processes for power generation. While focusing principally on the actual utilization of molten salts for a variety of materials preparation efforts in BARC, this lecture also covers a few of the other areas of technological applications together with the scientific basis for considering the molten salts in such situations. (author)

  3. Preparation a Child for Surgery and Hospitalization

    Directory of Open Access Journals (Sweden)

    Rahim Vakili

    2015-05-01

    Full Text Available Hospitalization and medical experiences can be confusing and stressful for children, teens and their families. It is very common for young people and their families to have many questions when they are scheduled for surgery or hospitalization. When children are given opportunities to cope successfully with medical experiences, they may see themselves as more capable, more in control, and more reassured. This success often leads to a more positive sense of self, as well as a healthier regard for medical procedures in general. Also, previous medical experiences can affect how the child will react to hospitalization. It is important to maintain a normal routine and activities, such as playing and schooling. Family and friend’s child should be encouraged to visit the child patient. The best way to prepare the child for hospitalization is to prepare ourselves by understanding what will occur.

  4. Preparation, characterization and utilization of starch nanoparticles.

    Science.gov (United States)

    Kim, Hee-Young; Park, Sung Soo; Lim, Seung-Taik

    2015-02-01

    Starch is one of the most abundant biopolymers in nature and is typically isolated from plants in the form of micro-scale granules. Recent studies reported that nano-scale starch particles could be readily prepared from starch granules, which have unique physical properties. Because starch is environmentally friendly, starch nanoparticles are suggested as one of the promising biomaterials for novel utilization in foods, cosmetics, medicines as well as various composites. An overview of the most up-to-date information regarding the starch nanoparticles including the preparation processes and physicochemical characterization will be presented in this review. Additionally, the prospects and outlooks for the industrial utilization of starch nanoparticles will be discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Health care reform: preparing the psychology workforce.

    Science.gov (United States)

    Rozensky, Ronald H

    2012-03-01

    This article is based on the opening presentation by the author to the Association of Psychologists in Academic Health Centers' 5th National Conference, "Preparing Psychologists for a Rapidly Changing Healthcare Environment" held in March, 2011. Reviewing the patient protection and affordable care act (ACA), that presentation was designed to set the stage for several days of symposia and discussions anticipating upcoming changes to the healthcare system. This article reviews the ACA; general trends that have impacted healthcare reform; the implications of the Act for psychology's workforce including the growing focus on interprofessional education, training, and practice, challenges to address in order to prepare for psychology's future; and recommendations for advocating for psychology's future as a healthcare profession.

  6. Solution chemistry techniques in SYNROC preparation

    International Nuclear Information System (INIS)

    Dosch, R.G.; Lynch, A.W.

    1981-07-01

    Investigations of titanate-based ceramic forms for radioactive waste immobilization are underway at Sandia National Laboratories (SNLA) and at Lawrence Livermore National Laboratory (LLNL). Although the waste forms differ as to overall product composition, the waste-containing phases in both ceramic products have similar crystalline structure types. These include metallic phases along with oxides with structure types of the mineral analogues perovskite, zirconolite, and hollandite. Significant differences also exist in the area of processing. More conventional ceramic processing methods are used at LLNL to produce SYNROC while solution chemistry techniques involving metal alkoxide chemistry and ion exchange have been developed at SNLA to prepare calcium titanate-based waste ceramics. The SNLA techniques were recently modified and applied to producing SYNROC (compositions C and D) as part of an interlaboratory information exchange between SNLA and LLNL. This report describes the methods used in preparing SYNROC including the solution interaction, and hot-pressing methods used to obtain fully dense SYNROC monoliths

  7. Patient preparation for nuclear medicine studies

    International Nuclear Information System (INIS)

    Stathis, V.J.; Cantrell, D.W.; Cantrell, T.J.

    1987-01-01

    In this chapter are described methods of patient preparation that can favorably affect the outcome of nuclear medicine studies in specific situations. Some of these practices may be considered essential to the success of the nuclear medicine procedure, whereas others may be thought of simply as a means of obtaining more valid or reliable information. Regardless of relative importance, each of the preparatory methods discussed can contribute to the quality of the respective study and can serve as a means of maximizing the value of nuclear medicine procedures. The specific patient preparation techniques discussed in this chapter may not be readily applicable to every practice setting or situation. These or similar procedures can be used or modified as necessary. It is important, however, that when new protocols are developed, the rationale and theoretical basis of each technique be considered

  8. Preparation of Porous Nanostructures Controlled by Electrospray

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Dung The; Kim, Kyo-Seon [Kangwon National University, Chuncheon (Korea, Republic of); Nah, In Wook [Korea Institute of Science and Technology, Seoul (Korea, Republic of)

    2015-10-15

    Various solid structures were prepared by electrospray technique. In this process, liquid flows out from a capillary nozzle under a high electrical potential and is subjected to an electric field, which causes elongation of the meniscus to form a jet. In our study, by controlling the amount of polyvinyl pyrrolydone in precursor solution, the jet either disrupted into droplets for the formation of spherical particles or was stretched in the electric field for the formation of fibers. During the electrospray process, the ethanol solvent was evaporated and induced the solidification of precursors, forming solid particles. The evaporation of ethanol solvent also enhanced the mass transport of solutes from the inner core to the solid shell, which facilitated fabrication of porous and hollow structure. The network structures were also prepared by heating the collector.

  9. Controlling air toxics through advanced coal preparation

    Energy Technology Data Exchange (ETDEWEB)

    Straszheim, W.E.; Buttermore, W.H.; Pollard, J.L. [Iowa State Univ., Ames, IA (United States)

    1995-11-01

    This project involves the assessment of advanced coal preparation methods for removing trace elements from coal to reduce the potential for air toxic emissions upon combustion. Scanning electron microscopy-based automated image analysis (SEM-AIA) and advanced washability analyses are being applied with state-of-the-art analytical procedures to predict the removal of elements of concern by advanced column flotation and to confirm the effectiveness of preparation on the quality of quantity of clean coal produced. Specific objectives are to maintain an acceptable recovery of combustible product, while improving the rejection of mineral-associated trace elements. Current work has focused on determining conditions for controlling column flotation system across its operating range and on selection and analysis of samples for determining trace element cleanability.

  10. Lithium aluminate spheroids prepared by emulsion procedure

    International Nuclear Information System (INIS)

    Mateos, A.G.; DiBello, P.M.; Zaleski, A.B.

    1991-01-01

    Lithium aluminate powders were prepared by emulsion evaporation method. The procedure involved preparation of water-in-oil emulsion, with the aqueous phase being a solution of Li and Al nitrates. The mixed salts precursor crystallized to gamma-LiAlO 2 at 700C. Single phase LiAlO 2 occurred as μm spherical particles with average crystallite size of 81 angstrom and surface area of 14 M 2 /g. After prolonged heating at 900C, the aluminate powder crystallite size grew by 5 times with a reduction in particle porosity. The emulsion technique promotes close control of particle size and shape of product and the technique facilitates chemical reaction of constituents and sinterability of resulting product

  11. Preparation and characterization of cuprous iodide nanoparticles

    International Nuclear Information System (INIS)

    Hong Tao Li; Li Xia Gu

    2007-01-01

    A new technique for the preparation of CuI nanoparticles from CuSO 4 and KI ethanol solutions has been developed. Preparation conditions were optimized through a series of experiments. Under these conditions, the yield of CuI reached 95.39%. The product was characterized and the reaction kinetics was studied. The results show that the product takes a roughly spherical shape with an average particle size of less then 50 nm. The activation energy of the formation of CuI is found to be E a = 0.58 x 10 2 kJ/mol, and the preexponential factor in the Arrhenius equation is k 0 = 7.43 x 10 16 mol/(l s) [ru

  12. Preparation of nanoporous carbons from graphite nanofibres

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Byung-Joo [Department of Green Chemistry and Environmental Biotechnology, University of Science and Technology, PO Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of); Park, Soo-Jin [Department of Chemistry, Inha University, 253, Nam-gu, Incheon 402-751 (Korea, Republic of)

    2006-09-14

    In this study we manufactured highly porous graphite nanofibres (GNFs) by physical activation in order to develop promising energy storage materials. The activation was performed at activation temperatures in the range of 800-1050 deg. C. The pore structures of the porous GNFs were analysed using N{sub 2}/77 K adsorption isotherms. After the activation, the porous GNFs showed a decrease in diameter and scratches on their surfaces, resulting from surface oxidation and the opening of the graphitic layers, respectively. It was found that the specific surface area of the porous GNFs prepared at 1050 deg. C was more than 2000 m{sup 2} g{sup -1} without loss of their fibre shape or serious increase in electrical resistivity. This result indicates that porous GNFs prepared under optimal conditions can have a much higher specific surface area and are promising materials for energy storage technologies.

  13. Preparation of edge states by shaking boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Z.C. [Department of Physics, Fuzhou University, Fuzhou 350002 (China); Center for Quantum Sciences and School of Physics, Northeast Normal University, Changchun 130024 (China); Hou, S.C. [Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang, Sichuan (China); Wang, L.C. [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China); Yi, X.X., E-mail: yixx@nenu.edu.cn [Center for Quantum Sciences and School of Physics, Northeast Normal University, Changchun 130024 (China)

    2016-10-15

    Preparing topological states of quantum matter, such as edge states, is one of the most important directions in condensed matter physics. In this work, we present a proposal to prepare edge states in Aubry–André–Harper (AAH) model with open boundaries, which takes advantage of Lyapunov control to design operations. We show that edge states can be obtained with almost arbitrary initial states. A numerical optimalization for the control is performed and the dependence of control process on the system size is discussed. The merit of this proposal is that the shaking exerts only on the boundaries of the model. As a by-product, a topological entangled state is achieved by elaborately designing the shaking scheme.

  14. Mechanical bowel preparation for elective colorectal surgery

    DEFF Research Database (Denmark)

    Guenaga, Katia K F G; Matos, Delcio; Wille-Jørgensen, Peer

    2009-01-01

    BACKGROUND: The presence of bowel contents during surgery has been related to anastomotic leakage, but the belief that mechanical bowel preparation (MBP) is an efficient agent against leakage and infectious complications is based on observational data and expert opinions only. OBJECTIVES...... with no MBP. Primary outcomes included anastomosis leakage - both rectal and colonic - and combined figures. Secondary outcomes included mortality, peritonitis, reoperation, wound infection, extra-abdominal complications, and overall surgical site infections. DATA COLLECTION AND ANALYSIS: Data were......: Four new trials were included at this update (total 13 RCTs with 4777 participants; 2390 allocated to MBP (Group A), and 2387 to no preparation (Group B), before elective colorectal surgery) .Anastomotic leakage occurred:(i) in 10.0% (14/139) of Group A, compared with 6.6% (9/136) of Group B for low...

  15. Data preparation for asteroseismology with TESS

    Directory of Open Access Journals (Sweden)

    Lund Mikkel N.

    2017-01-01

    Full Text Available The Transiting Exoplanet Survey Satellite (TESS is a NASA Astrophysics Explorer mission. Following its scheduled launch in 2017, TESS will focus on detecting exoplanets around the nearest and brightest stars in the sky, for which detailed follow-up observations are possible. TESS will, as the NASA Kepler mission, include a asteroseismic program that will be organized within the TESS Asteroseismic Science Consortium (TASC, building on the success of the Kepler Asteroseismic Science Consortium (KASC. Within TASC data for asteroseismic analysis will be prepared by the TASC Working Group 0 (WG-0, who will facilitate data to the community via the TESS Asteroseismic Science Operations Center (TASOC, again building on the success of the corresponding KASOC platform for Kepler. Here, we give an overview of the steps being taken within WG-0 to prepare for the upcoming TESS mission.

  16. Preparing Teachers for Anti-oppressive Education

    DEFF Research Database (Denmark)

    Baber, Sikunder Ali

    2004-01-01

    While theories and recommendations continue to proliferate in the educational research literature on what it means to teach towards social justice and to prepare teachers for such teaching, so do concerns that these theories and recommendations fail to account for the ways that the contexts...... of teaching cultural contexts, national contexts, political contexts always affect teaching in idiosyncratic, unpredictable and even contradictory ways. Given that much educational research fails to trouble the US-centric nature of prevailing conceptions of social justice and teacher education......, it is important to learn about the unique as well as shared challenges facing teacher educators around the globe. In this article, teacher educators from Asia, Africa, North America and South America offer a sampling of initiatives in anti-oppressive teacher education; that is, initiatives to prepare teachers...

  17. IRRIGOGRAPHY AFTER PREPARATIONS OF PATIENTS WITH FORTRANS

    Directory of Open Access Journals (Sweden)

    Irena Jankovic

    2006-01-01

    Full Text Available Fortrans® is a laxative in the form of the powder which is used for making solution for oral application. Laxative effects are achieved over long linear polymer (polyethylene-glikol - PEG 4000 which binds water molecules, increasing thus the volume of fluids in the intestinal tract.Material of study comprises 150 irrigographies made at the Institute of Radiology of the Clinical Center in Nis in the period from January 2004 to Jun 2005.The preparation in these cases was done by Fortrans®. The contrast medium used was barium sulfate.The results of study are presented in illustrations and irrigograms.In conclusion,we can say that Fortrans® provides reliable, effective and simple preparation of patients for irrigography as well as for fast, comfortable and efficient endographic examination (irrigography. The obtained irrigograms are of satisfactory quality, showing sharp contrasts.

  18. Preparation and characterization of Bi-2223 tapes

    International Nuclear Information System (INIS)

    Hense, K.; Kirchmayr, H.; Kovac, P.; Lackner, R.; Mueller, M.; Pachla, W.; Pitel, J.; Polak, M.; Usak, P.

    2003-01-01

    In a concerted action between Austrian, Slovakian and Polish research institutes Bi-2223 tapes have been prepared and characterized by different physical methods. Metallographic studies by optical as well as electron microscopy, measurements of critical current (angle dependent) and losses have been performed. Properties of individual filaments extracted from multifilamentary tapes were also studied. Uniformity of local I C of these filaments were considerably lower than that of the whole tape. This indicates that improvement of filament homogeneity could improve the over all J C in tapes. The application of these tapes for optimized magnet coils will also be discussed. From these investigations a better understanding of the mechanisms, limiting the critical current could be achieved and more optimized preparation methods can be envisioned

  19. Tissue culture of surgically prepared temporalis fascia.

    Science.gov (United States)

    Walby, A P; Kerr, A G; Nevin, N C; Woods, G

    1982-10-01

    Temporalis fascia which is used to graft the tympanic membrane has been shown to be viable in tissue culture by a previous pilot study. This present study reports the effect on the viability of the fascia by scraping loose connective tissue from it and allowing it to dry. Pieces of fascia from 30 patients were each divided in 4 and prepared to give explants, fresh, fresh and scraped, dried, and dried and scraped. The fascia grew from 17 patients when cultured fresh, 5 when fresh and scraped, 1 when dried, and none when dried and scraped. These results are significantly different and show that the fascia is devitilized when prepared by the normal method for use in tympanoplasty.

  20. Large-scale preparation of plasmid DNA.

    Science.gov (United States)

    Heilig, J S; Elbing, K L; Brent, R

    2001-05-01

    Although the need for large quantities of plasmid DNA has diminished as techniques for manipulating small quantities of DNA have improved, occasionally large amounts of high-quality plasmid DNA are desired. This unit describes the preparation of milligram quantities of highly purified plasmid DNA. The first part of the unit describes three methods for preparing crude lysates enriched in plasmid DNA from bacterial cells grown in liquid culture: alkaline lysis, boiling, and Triton lysis. The second part describes four methods for purifying plasmid DNA in such lysates away from contaminating RNA and protein: CsCl/ethidium bromide density gradient centrifugation, polyethylene glycol (PEG) precipitation, anion-exchange chromatography, and size-exclusion chromatography.

  1. Data preparation for asteroseismology with TESS

    Science.gov (United States)

    Lund, Mikkel N.; Handberg, Rasmus; Kjeldsen, Hans; Chaplin, William J.; Christensen-Dalsgaard, Jørgen

    2017-10-01

    The Transiting Exoplanet Survey Satellite (TESS) is a NASA Astrophysics Explorer mission. Following its scheduled launch in 2017, TESS will focus on detecting exoplanets around the nearest and brightest stars in the sky, for which detailed follow-up observations are possible. TESS will, as the NASA Kepler mission, include a asteroseismic program that will be organized within the TESS Asteroseismic Science Consortium (TASC), building on the success of the Kepler Asteroseismic Science Consortium (KASC). Within TASC data for asteroseismic analysis will be prepared by the TASC Working Group 0 (WG-0), who will facilitate data to the community via the TESS Asteroseismic Science Operations Center (TASOC), again building on the success of the corresponding KASOC platform for Kepler. Here, we give an overview of the steps being taken within WG-0 to prepare for the upcoming TESS mission.

  2. Pharmaceutical studies on and clinical application of olanzapine suppositories prepared as a hospital preparation

    OpenAIRE

    Matsumoto, Kazuaki; Kimura, Satoru; Takahashi, Kenichi; Yokoyama, Yuta; Miyazawa, Masayuki; Kushibiki, Satoko; Katamachi, Morio; Kizu, Junko

    2016-01-01

    Background A new formulation of olanzapine available for terminally ill patients is needed. Rectal administration using suppositories is an alternative for patients for whom administration via the oral route is not feasible. In the present study, we prepared olanzapine suppositories, and confirmed using pharmaceutical tests. Furthermore, we demonstrated the efficacy and safety of olanzapine suppositories in terminally ill patients. Methods We prepared olanzapine suppositories using bases cons...

  3. Guide Manual for Preparation of Water Balances

    Science.gov (United States)

    1980-11-01

    boundaries for the AGUA study (39). This figure was developed from a LANDSAT photograph of the Albuquerque, New Mexico area. It clearly shows the boundaries of...Guide to Water-Management Alternatives. USGS Professional Paper 627-F. 12. Gilbert, J. B. and Associates, 1977. Report on Water Conservation Reuse and...Report on Water Conservation Reuse and Supply, San Francisco Bay Region, prepared by J. B. Gilbert and Associates, 1978. (12) Purposes of this study

  4. Advanced Problems in Mathematics : Preparing for University

    OpenAIRE

    Siklos, Stephen

    2016-01-01

    " This book is intended to help candidates prepare for entrance examinations in mathematics and scientific subjects, including STEP (Sixth Term Examination Paper). STEP is an examination used by Cambridge colleges as the basis for conditional offers. They are also used by Warwick University, and many other mathematics departments recommend that their applicants practice on the past papers even if they do not take the examination. Advanced Problems in Mathematics is recommended as preparati...

  5. Dengzhanhua preparations for acute cerebral infarction.

    Science.gov (United States)

    Cao, Wenzhai; Liu, Weimin; Wu, Taixiang; Zhong, Dechao; Liu, Guanjian

    2008-10-08

    Dengzhanhua preparations are widely used in China. Many controlled trials have been undertaken to investigate the efficacy of dengzhanhua preparations in the treatment of acute cerebral infarction. To assess whether dengzhanhua preparations are effective and safe at improving outcomes in patients with acute cerebral infarction. We searched the Cochrane Stroke Group Trials Register (last searched October 2007), the Chinese Stroke Trials Register (last searched June 2006), the trials register of the Cochrane Complementary Medicine Field (last searched June 2006), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library, Issue 2 2006), MEDLINE (1966 to June 2006), EMBASE (1980 to June 2006), AMED (the Allied and Complementary Medicine Database, 1985 to June 2006), the China Biological Medicine Database (CBM-disc, 1979 to June 2006), and Chinese Knowledge Infrastructure (CNKI,1994 to October 2007). We also searched the reference lists of relevant articles. Randomised and quasi-randomised controlled clinical trials of dengzhanhua preparations regardless of duration, dosage and route of administration in patients with confirmed acute cerebral infarction. Two review authors independently applied the inclusion criteria, assessed trial quality, and extracted the data. We included nine trials, all conducted in China, involving 723 participants. The method of randomisation and concealment was poorly described. The included trials compared dengzhanhua injection plus routine therapy with routine therapy alone. Patients were enrolled up to one week after the onset of stroke. No trials reported data on the pre-specified primary or secondary outcomes. In a post-hoc comparison of dengzhanhua injection plus routine therapy versus routine therapy alone, dengzhanhua injection showed a statistically significant benefit on the outcome 'marked neurologic improvement' (relative risk 1.53; 95% confidence interval 1.36 to 1.72). No serious adverse effects were

  6. Preparation of Metal Nanoparticles via Sonochemical Reduction

    OpenAIRE

    Saura Puig, Oriol

    2011-01-01

    Pure nickel, copper and zinc nanoparticles were prepared from chlorides of these elements using ultrasound with three different reducing agents (zinc, aluminum and magnesium). In the second part, syntheses of nickel-copper alloy and nickel-zinc using ultrasound were investigated. The products were characterized by powder X-ray diffraction. The reaction parameters, such as sonification time, the amount of reagents and reaction conditions were modified to observe variations in...

  7. Test case preparation using a prototype

    OpenAIRE

    Treharne, Helen; Draper, J.; Schneider, Steve A.

    1998-01-01

    This paper reports on the preparation of test cases using a prototype within the context of a formal development. It describes an approach to building a prototype using an example. It discusses how a prototype contributes to the testing activity as part of a lifecycle based on the use of formal methods. The results of applying the approach to an embedded avionics case study are also presented.

  8. Process of preparing asphalt bodies, etc

    Energy Technology Data Exchange (ETDEWEB)

    Klever, H W

    1924-05-03

    A process for the preparation of asphaltic bodies is characterized in that bituminous minerals such as oil-shale, coal, etc. are submitted to a heating process, with or without pressure, which is so mild that asphaltic bodies result and petroleum and tar oils are formed only in small amounts, and that the asphaltic bodies are used either together with the mineral constituents or after filtration from the latter.

  9. Silicon nanoparticles: Preparation, properties, and applications

    International Nuclear Information System (INIS)

    Chang Huan; Sun Shu-Qing

    2014-01-01

    Silicon nanoparticles have attracted great attention in the past decades because of their intriguing physical properties, active surface state, distinctive photoluminescence and biocompatibility. In this review, we present some of the recent progress in preparation methodologies and surface functionalization approaches of silicon nanoparticles. Further, their promising applications in the fields of energy and electronic engineering are introduced. (invited review — international conference on nanoscience and technology, china 2013)

  10. Anticipating Serendipity. Preparing for the Unexpected.

    Directory of Open Access Journals (Sweden)

    Marlowe Thomas J.

    2014-08-01

    Full Text Available Serendipity—using "fortunate accidents" for learning or discovery—is a valued if too infrequent route to progress. Although serendipity cannot be scheduled or relied upon, one can develop skills, flexibility and habits of mind that make the recognition and incorporation of serendipitous discoveries more likely. This paper overviews at a high level a program of activities and concepts aimed at preparing modern professionals and communities to leverage the fortunate occurrences they encounter.

  11. Mechanical bowel preparation for elective colorectal surgery

    DEFF Research Database (Denmark)

    Güenaga, Katia F; Matos, Delcio; Wille-Jørgensen, Peer

    2011-01-01

    The presence of bowel contents during colorectal surgery has been related to anastomotic leakage, but the belief that mechanical bowel preparation (MBP) is an efficient agent against leakage and infectious complications is based on observational data and expert opinions only.An enema before...... the rectal surgery to clean the rectum and facilitate the manipulation for the mechanical anastomosis is used for many surgeons. This is analysed separately...

  12. Identifying, Preparing and Evaluating Army Instructors

    Science.gov (United States)

    2016-04-01

    is perhaps the most prominent and widely-used framework for evaluating training courses and programs (Hilbert, Preskill & Russ- Eft , 1997; Hoole...Glazerman, S., & Seifullah, A. (2012). An evaluation of the Chicago Teacher Advancement Program (Chicago TAP ) after four years. (Report prepared for...H., & Russ- Eft , D. (1997). Evaluating training. In L. J. Bassi & D. Russ- Eft (Eds.), What works: Assessment, development, and measurement (pp. 109

  13. Independence of Movement Preparation and Movement Initiation.

    Science.gov (United States)

    Haith, Adrian M; Pakpoor, Jina; Krakauer, John W

    2016-03-09

    Initiating a movement in response to a visual stimulus takes significantly longer than might be expected on the basis of neural transmission delays, but it is unclear why. In a visually guided reaching task, we forced human participants to move at lower-than-normal reaction times to test whether normal reaction times are strictly necessary for accurate movement. We found that participants were, in fact, capable of moving accurately ∼80 ms earlier than their reaction times would suggest. Reaction times thus include a seemingly unnecessary delay that accounts for approximately one-third of their duration. Close examination of participants' behavior in conventional reaction-time conditions revealed that they generated occasional, spontaneous errors in trials in which their reaction time was unusually short. The pattern of these errors could be well accounted for by a simple model in which the timing of movement initiation is independent of the timing of movement preparation. This independence provides an explanation for why reaction times are usually so sluggish: delaying the mean time of movement initiation relative to preparation reduces the risk that a movement will be initiated before it has been appropriately prepared. Our results suggest that preparation and initiation of movement are mechanistically independent and may have a distinct neural basis. The results also demonstrate that, even in strongly stimulus-driven tasks, presentation of a stimulus does not directly trigger a movement. Rather, the stimulus appears to trigger an internal decision whether to make a movement, reflecting a volitional rather than reactive mode of control. Copyright © 2016 the authors 0270-6474/16/363007-10$15.00/0.

  14. Intelligence Preparation for Operational Resilience (IPOR)

    Science.gov (United States)

    2015-12-01

    unlimited distribution except as restricted below. Internal use:* Permission to reproduce this material and to prepare derivative works from this...material for internal use is granted, provided the copyright and “No Warranty” statements are included with all reproductions and de- rivative works...legal coun- sel regarding the latest state of jurisprudence . 2.1.3 Determine the Technological Environment Changes in the technical landscape can also

  15. Preparation and ocular pharmacokinetics of ganciclovir liposomes

    OpenAIRE

    Shen, Yan; Tu, Jiasheng

    2007-01-01

    Ophthalmic liposomes of ganciclovir (GCV) were prepared by the reverse phase evaporation method, and their ocular pharmacokinetics in albino rabbits were compared with those obtained after dosing with GCV solution. The in vitro transcorneal permeability of GCV liposomes was found to be 3.9-fold higher than that of the solution. After in vivo instillation in albino rabbits, no difference was found in the precorneal elimination rate of GCV from liposome vs solution dosing. The aqueous humor con...

  16. Preparation of organoclays in matrix elastomer

    International Nuclear Information System (INIS)

    Gonzales-Fernandes, M.; Valenzuela-Diaz, F.R.; Wiebeck, H.; Martin-Cortes, G.R.

    2014-01-01

    Natural rubber nanocomposite / bentonite modified by sodification chocolate B and treated with quaternary ammonium salt was prepared. The clay in its natural state after sodification and after quaternization was characterized by XRD, IR, and stereoscopic microscope and SEM was measured its ability to swell in many organic solvents. The plates obtained after curing, measures have had their mechanical properties and analyzed by XRD. The nanocomposites showed improvement in their mechanical properties compared to boards without the addition of clay. (author)

  17. Stability of an extemporaneously prepared thalidomide suspension.

    Science.gov (United States)

    Kraft, Shawna; Johnson, Cary E; Tyler, Ryan P

    2012-01-01

    The short-term physical and chemical stability of an oral suspension of thalidomide 20 mg/mL was studied. An oral suspension of thalidomide 20 mg/mL was prepared by emptying the contents of 12 100-mg thalidomide capsules into a glass mortar; 30 mL of Ora-Plus and 30 mL of Ora-Sweet were mixed and added to the thalidomide powder to make a final volume of 60 mL. Three identical samples of the formulation were prepared and placed in 2-oz amber plastic bottles with child-resistant caps and stored under refrigeration (3-5 °C). A 1-mL sample was withdrawn from each of the three samples with a micropipette immediately after preparation and at 7, 14, 21, 28, and 35 days. After further dilution to an expected concentration of 20 μg/mL with acetonitrile-methanol and then dilution with mobile phase, the samples were assayed in duplicate using stability-indicating high-performance liquid chromatography. Stability was determined by evaluating the percentage of the initial concentration remaining at each time point; stability was defined as the retention of at least 90% of the initial concentration of thalidomide. At least 92% of the initial thalidomide concentration remained throughout the 35-day study period. There were no detectable changes in color, odor, or pH and no visible microbial growth in any sample. An extemporaneously prepared suspension of thalidomide 20 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet was stable for at least 35 days when stored in 2-oz amber plastic bottles under refrigeration.

  18. Sample preparation method for scanning force microscopy

    CERN Document Server

    Jankov, I R; Szente, R N; Carreno, M N P; Swart, J W; Landers, R

    2001-01-01

    We present a method of sample preparation for studies of ion implantation on metal surfaces. The method, employing a mechanical mask, is specially adapted for samples analysed by Scanning Force Microscopy. It was successfully tested on polycrystalline copper substrates implanted with phosphorus ions at an acceleration voltage of 39 keV. The changes of the electrical properties of the surface were measured by Kelvin Probe Force Microscopy and the surface composition was analysed by Auger Electron Spectroscopy.

  19. The preparation of radioactivity labelled DNA

    International Nuclear Information System (INIS)

    Ballance, P.; Morgan, J.; McGregor, G.; Durkacz, B.

    1984-01-01

    The nick translation reaction, which uses the endonuclease enzyme to incorporate pieces of DNA into the genetic material of other organisms, is being used more and more in Molecular Biology research for the preparation of pure DNA labelled with 32 P. However results are presented which show that high radiation doses are received by the hands of nick translation workers. A Scheme of Work to reduce these doses is described. (author)

  20. Purity of targets prepared on Cu substrates

    Science.gov (United States)

    Méens, A.; Rossini, I.; Sens, J. C.

    1993-09-01

    The purity of several elemental self-supporting targets usually prepared by evaporation onto soluble Cu substrates has been studied. The targets were analysed by Rutherford backscattering and instrumental neutron activation analysis. Because of the high percentage of Cu observed in some Si targets, further measurements, including transmission electron microscopy, have been performed on Si targets deposited by e-gun bombardment onto Cu and ion-beam sputtering onto betaine.

  1. Preparation of high-temperature superconducting ceramics

    International Nuclear Information System (INIS)

    Causa, M.T.; Dutrus, S.M.; Esparza, Daniel; Fainstein, Carlos; Malachevsky, M.T.; Salva, Horacio; Sanchez, Rodolfo; Steren, L.B.; Tovar, Manuel; Veglio, Nestor

    1987-01-01

    We have prepared samples of the family ABa2Cu3Ox (A=Y, Gd, Eu, Dy, Sm, Er). The powdered samples were characterized by X-ray diffraction at room temperature. We have also studied the effect of Fe impurities in YBa2Cu3Ox and EuBa2Cu3Ox. Moreover, single crystals of YBa2Cu3Ox and La(1-x)SrxCuO4 were grown using cooper oxide flux. (Author) [es

  2. Preparation and characterization of aluminum stearate

    Directory of Open Access Journals (Sweden)

    Lončar Eva S.

    2003-01-01

    Full Text Available Preparation of aluminum stearate by the precipitation method was examined under various conditions of stearic acid saponification with sodium hydroxide. It was proved that the most favorable ratio of acid/alkali was 1:1.5 and that the obtained soap was very similar to the commercial product. Endothermic effects determined by differential scanning calorimetry and also the other parameters showed that the soaps consisted mono-, di-, tristearates and non-reacted substances, where distearate was the dominant form.

  3. Preparation of nitrogen-doped carbon tubes

    Science.gov (United States)

    Chung, Hoon Taek; Zelenay, Piotr

    2015-12-22

    A method for synthesizing nitrogen-doped carbon tubes involves preparing a solution of cyanamide and a suitable transition metal-containing salt in a solvent, evaporating the solvent to form a solid, and pyrolyzing the solid under an inert atmosphere under conditions suitable for the production of nitrogen-doped carbon tubes from the solid. Pyrolyzing for a shorter period of time followed by rapid cooling resulted in a tubes with a narrower average diameter.

  4. Spreading characteristics of proprietary rectal steroid preparations

    International Nuclear Information System (INIS)

    Hay, D.J.

    1982-01-01

    Three types of rectal steroid preparation were labelled with Technetium 99 or Indium 111, and the extent of spread of each within the bowel was followed, immediately after administration and at 2hrs, using a gamma camera. Patients with ulcerative colitis were compared with controls. Results indicate that 'Colifoam' enema and 'Predsol' suppository act mainly in the rectum, but 'Predsol retention' enema spreads further into the colon, making it more useful for patients with extensive ulcerative colitis. (U.K.)

  5. Preparation of pyronaridine labelled with tritium

    International Nuclear Information System (INIS)

    Jiang Shangen; Zhang Liufang; Zheng Dongzhu; Feng Zheng; Wu Zufan

    1987-01-01

    Pyronaridine is a high efficient and low toxic new antimalarial drug. 3 H-pyronaridine was prepared by catalytic isotopic exchange in solution with tritium gas using PdO/BaSO 4 as catalyst. That crude product was purified by extraction. 3 H-NMR spectra of pyronaridine showed that tritium was labelled at the 6-position. Specific activity of 3 H-pyronaridine was 5.5 Ci/mmol and radiochemical purity over 95%

  6. Preparation of pyronaridine labelled with tritium

    Energy Technology Data Exchange (ETDEWEB)

    Shangen, Jiang; Liufang, Zhang; Dongzhu, Zheng; Zheng, Feng; Zufan, Wu

    1987-12-01

    Pyronaridine is a high efficient and low toxic new antimalarial drug. /sup 3/H-pyronaridine was prepared by catalytic isotopic exchange in solution with tritium gas using PdO/BaSO/sub 4/ as catalyst. That crude product was purified by extraction. /sup 3/H-NMR spectra of pyronaridine showed that tritium was labelled at the 6-position. Specific activity of /sup 3/H-pyronaridine was 5.5 Ci/mmol and radiochemical purity over 95%.

  7. Organic astatine compounds, their preparation and properties

    Energy Technology Data Exchange (ETDEWEB)

    Vasaros, L; Berei, K

    1985-01-01

    Aromatic astatine compounds of possible medical application were prepared by high energy substitutions, by astatine-halogen, and by electrophil astatine-hydrogen substitutions at the Joint Institute of Nuclear Researches, Dubna. Physico-chemical properties of organic astatine compounds such as boiling point and evaporation heat, and the refraction and dissociation energy of carbon-astatine bonds were determined experimentally by gas chromatography. The results are compared with extrapolated data. (V.N.). 41 refs.; 7 figs.; 5 tables.

  8. Method for preparation of borax decahydrate

    International Nuclear Information System (INIS)

    Dujnedenko, V.I.; Chumaevskij, V.A.; Kovalev, A.S.; Gabova, E.L.; Suvorova, M.R.; Smirnova, V.G.; Smirnov, A.S.

    1990-01-01

    A highly productive method of borax decahydrate preparation, consisting in the mixing of boric acid, soda and mother solution at the temperature not exceeding 40 deg is described. The mixture is supplied to borax circulating solution at the temperature of 85-95 deg. After crystallization borax decahydrate is isolated from mother solution and solution is directed for mixing with boric acid and soda. The given method permits to increase the process productivity 3.75-4.50 fold

  9. Preparation of TiC single crystals

    International Nuclear Information System (INIS)

    Scheerer, B.; Fink, J.; Reichardt, W.

    1975-07-01

    TiC single crystals were prepared by vertical zone melting for measurements of the phonon dispersion by inelastic neutron scattering. The influence of the starting material and of the growing conditions on the growth of the crystal were studied. The crystals were characterized by chemical methods, EMX and neutron diffraction. It was possible to grow single crystals with a volume of up to 0.6 cm 3 and mosaic spread of less then 0.4 0 . (orig.) [de

  10. Long distance triathlon: demands, preparation and performance

    OpenAIRE

    Laursen, Paul B.

    2011-01-01

    The rise in worldwide popularity of long distance triathlon racing comes with it an increased interest into how to train and prepare optimally for such an event. This paper examines the physiologic and bioenergetic demands of long distance triathlon racing, including energy requirements, muscle damage consequences, thermoregulatory demands and water turnover rates. In response to these physiological challenges, the second part of the paper describes the training goals and race practices that ...

  11. New technology for preparing drilling solutions

    Energy Technology Data Exchange (ETDEWEB)

    Proselkov, Y M; Minenkov, V M

    1981-01-01

    It is indicated that it is possible to provide the necessary indices of structural-mechanical properties of solution with additional dispersion of clay particles in water at the initial stage of preparation of solutions. In the process of dispersion the indices of rheological properties of the solution vary: static SNS and dynamic of shear stress, plastic viscosity. With consideration of the aforementioned a new technology has been developed for preparing solutions from powdery materials. To carry out the technological process we use serial blocks BPR-70 with ejector hydromixer, drilling or centrifuge pump, standard capacity of circulation system, and hydraulic dispersing agent. The technology for preparing the solution is as follow (see figure). Water is poured into tank 4 in an amount equal to half the volume of the prepared portion of solution. In hydraulic disperser 6 packing is installed with a diameter in accordance with the productivity of the drilling pump 5. After this aeration is switched on for 5-7 minutes in the silo 1 of BPR with excess air pressure of 0.2-0.3 kg/cm/sup 2/. Then the drilling pump is switched on and water is pumped through in the following order: tank 4, hydraulic disperser 6, ejector hydromixer 3, tank 4. Pressure at the pump discharge should be 120-150 kg/cm/sup 2/, and the vacuum in the chamber of the electronic hydromixer is at least 0.2 kg/cm/sup 2/. With the aid of a regulating fan 2 we must create a vacuum in the chamber of the hydromixer amounting to 0.08-0.12 kg/cm/sup 2/, and as a consequence of this the fan can regulate the rate and evenness of clay powder feed.

  12. Preparation for Medical Librarianship: Status and Potential *

    Science.gov (United States)

    Zachert, Martha Jane K.

    1972-01-01

    The educational programs for the preparation of health sciences information personnel are described and the lack of evaluative criteria or studies in relation to these programs is noted. The author recommends an extension of MLA's role in four areas of the educational process: curriculum design, teacher development, development of learning materials, and evaluation of the educational effort. Preconditions for the fulfillment of the projected MLA role are identified as unity of purpose, leadership by the headquarters staff, and money. PMID:16017604

  13. Preparation of cement from oil shale

    Energy Technology Data Exchange (ETDEWEB)

    1922-08-24

    A process for preparing cement from oil shale is described. The simultaneous recovery of shale oil by heating the oil shale formed into briquets with finely ground lime or limestone in a stream of hot gases is characterized by the fact that live steam or fine drops of water as preserving and carbonization means is introduced into the furnace, at the place, where the temperature of the briquet reaches about 500 to 600/sup 0/ C.

  14. PREPARATION OF ACTINIDE-ALUMINUM ALLOYS

    Science.gov (United States)

    Moore, R.H.

    1962-09-01

    BS>A process is given for preparing alloys of aluminum with plutonium, uranium, and/or thorium by chlorinating actinide oxide dissolved in molten alkali metal chloride with hydrochloric acid, chlorine, and/or phosgene, adding aluminum metal, and passing air and/or water vapor through the mass. Actinide metal is formed and alloyed with the aluminum. After cooling to solidification, the alloy is separated from the salt. (AEC)

  15. [Preparation of nano-nacre artificial bone].

    Science.gov (United States)

    Chen, Jian-ting; Tang, Yong-zhi; Zhang, Jian-gang; Wang, Jian-jun; Xiao, Ying

    2008-12-01

    To assess the improvements in the properties of nano-nacre artificial bone prepared on the basis of nacre/polylactide acid composite artificial bone and its potential for clinical use. The compound of nano-scale nacre powder and poly-D, L-lactide acid (PDLLA) was used to prepare the cylindrical hollow artificial bone, whose properties including raw material powder scale, pore size, porosity and biomechanical characteristics were compared with another artificial bone made of micron-scale nacre powder and PDLLA. Scanning electron microscope showed that the average particle size of the nano-nacre powder was 50.4-/+12.4 nm, and the average pore size of the artificial bone prepared using nano-nacre powder was 215.7-/+77.5 microm, as compared with the particle size of the micron-scale nacre powder of 5.0-/+3.0 microm and the pore size of the resultant artificial bone of 205.1-/+72.0 microm. The porosities of nano-nacre artificial bone and the micron-nacre artificial bone were (65.4-/+2.9)% and (53.4-/+2.2)%, respectively, and the two artificial bones had comparable compressive strength and Young's modulus, but the flexural strength of the nano-nacre artificial bone was lower than that of the micro-nacre artificial bone. The nano-nacre artificial bone allows better biodegradability and possesses appropriate pore size, porosity and biomechanical properties for use as a promising material in bone tissue engineering.

  16. Urine sample preparation for proteomic analysis.

    Science.gov (United States)

    Olszowy, Pawel; Buszewski, Boguslaw

    2014-10-01

    Sample preparation for both environmental and more importantly biological matrices is a bottleneck of all kinds of analytical processes. In the case of proteomic analysis this element is even more important due to the amount of cross-reactions that should be taken into consideration. The incorporation of new post-translational modifications, protein hydrolysis, or even its degradation is possible as side effects of proteins sample processing. If protocols are evaluated appropriately, then identification of such proteins does not bring difficulties. However, if structural changes are provided without sufficient attention then protein sequence coverage will be reduced or even identification of such proteins could be impossible. This review summarizes obstacles and achievements in protein sample preparation of urine for proteome analysis using different tools for mass spectrometry analysis. The main aim is to present comprehensively the idea of urine application as a valuable matrix. This article is dedicated to sample preparation and application of urine mainly in novel cancer biomarkers discovery. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Electrochemical preparation of technetium hydroxyethylidene diphosphonate radiopharmaceuticals

    International Nuclear Information System (INIS)

    Scott, R.B.

    1984-01-01

    This work describes the liquid chromatographic and electrochemical analysis of electrogenerated technetium hydroxyethylidene diphosphonate (HEDP) complexes, and studies the effectiveness of the resulting bone imaging agents. Anion exchange High Performance Liquid Chromatography is used to separate components, and γ emission is used as the detection mode. The reaction mixtures were prepared at a series of reduction potentials and pH values, at both carrier added and no carrier added technetium levels. The results indicate that all three parameters affect the final complex composition to varying degrees. By optimizing the conditions, a preparation was made which results in a high percentage of a Tc-HEDP complex thought to be a very good home imager. This component was isolated chromatographically and injected into female Sprague-Dawley rats. Comparisons were run on the uptake for seven tissue types at two incubation times. Mercury and Reticulated Vitreous Carbon were used as the working electrode materials, and it is shown how reduced technetium will significantly alter the electrode characteristics, where a conditioned electrode will produce different complexes from those produced at fresh electrode material. By employing coulometric analysis as the preparation was reduced, an n value of 4 was calculated for a particular complex. This procedure involved tracking the radioactive technetium species carefully to account for all electrons used in the system. Finally, an electrochemical detection method for HEDP was explored, utilizing the property of mercury complexation. Anodic sweep Differential Pulse Polarography gives an analytical signal for HEDP at +0.250 V vs Ag/AgCl

  18. A novel method for preparing microplastic fibers

    Science.gov (United States)

    Cole, Matthew

    2016-10-01

    Microscopic plastic (microplastic, 0.1 µm-5 mm) is a widespread pollutant impacting upon aquatic ecosystems across the globe. Environmental sampling has revealed synthetic fibers are prevalent in seawater, sediments and biota. However, microplastic fibers are rarely used in laboratory studies as they are unavailable for purchase and existing preparation techniques have limited application. To facilitate the incorporation of environmentally relevant microplastic fibers into future studies, new methods are required. Here, a novel cryotome protocol has been developed. Nylon, polyethylene terephthalate and polypropylene fibers (10-28 μm diameter) were aligned, embedded in water-soluble freezing agent, and sectioned (40-100 μm length) using a cryogenic microtome. Microplastic fibers were prepared to specified lengths (P < 0.05, ANOVA) and proved consistent in size. Fluorescent labelling of Nylon microfibers with Nile Red facilitated imaging. A 24 h feeding experiment confirmed bioavailability of 10 × 40 μm Nylon fibers to brine shrimp (Artemia sp). This protocol provides a consistent method for preparing standardised fibrous microplastics, with widths similar to those observed in the natural environment, which could ultimately lead to a better understanding of the biological and ecological effects of microplastic debris in the environment.

  19. Preparing to perform an awake fiberoptic intubation.

    LENUS (Irish Health Repository)

    Walsh, M E

    2012-02-03

    Fiberoptically guided tracheal intubation represents one of the most important advances in airway management to occur in the past thirty years. Perhaps its most important role is in management of the anticipated difficult airway. This is a situation in which the dangers of encountering the life-threatening "can\\'t intubate, can\\'t ventilate" situation can be avoided by placement of an endotracheal tube while the patient is awake. Although skill at the procedure of endoscopy is obviously necessary in this setting, these authors hold that success or failure of the technique frequently depends on the adequacy of preparation. These measures include 1) pre-operative assessment of the patient; 2) careful explanation of what lies in store; 3) "setting the stage"; 4) preparing the equipment to be used; and 5) preparing the patient (antisialogue, sedation, application of topical anesthesia to the upper airway). If these preparatory measures are carried out meticulously, the likelihood of performing a successful and comfortable awake fiberoptic tracheal intubation is greatly increased.

  20. Robot system for preparing lymphocyte chromosome

    International Nuclear Information System (INIS)

    Hayata, Isamu; Furukawa, Akira; Yamamoto, Mikio; Sato, Koki; Tabuchi, Hiroyoshi; Okabe, Nobuo.

    1992-01-01

    Towards the automatization of the scoring of chromosome aberrations in radiation dosimetry with the emphasis on the improvement of biological preparations, the conventional culture and harvesting method was modified. Based on this modified method, a culture and harvest robotic system (CHROSY) for preparing lymphocyte chromosome was developed. The targeted points of the modification are as in the preparing lymphocyte chromosome was developed. The targeted points of the modification are as in the following. 1) Starting culture with purified lymphocytes in a fixed cell number. 2) Avoiding the loss of cells in changing the liquids following centrifugalization. 3) Keeping the quantity of the liquids to be applied to the treatments of cells fixed. 4) Building a system even a beginner can handle. System features are as follows. 1) Operation system: Handling robot having 5 degrees of freedom; a rotator incubator with an automatic sliding door; units for setting and removing pipette tips; a centrifuge equipped with a position adjuster and an automatic sliding door; two aluminium block baths; two nozzles as pipettes and aspirators connected to air pumps; a capping unit with a nozzle for CO 2 gas; a compressor; and an air manipulated syringe. 2) Control system; NEC PC-9801RX21 with CRT; and program written in Basic and Assembly languages on MS-DOS. It took this system 2 hours and 25 minutes to harvest 2 cultures. A fairly good chromosome slide was made from the sample harvested by CHROSY automatically. (author)

  1. Preparation of single phase molybdenum boride

    International Nuclear Information System (INIS)

    Camurlu, Hasan Erdem

    2011-01-01

    Highlights: → Formation of Mo and a mixture of molybdenum boride phases take place in preparation of molybdenum borides. → It is intricate to prepare single phase molybdenum borides. → Formation of single phase MoB from MoO 3 + B 2 O 3 + Mg mixtures has not been reported previously. → Single phase MoB was successfully prepared through a combination of mechanochemical synthesis and annealing process. - Abstract: The formation of MoB through volume combustion synthesis (VCS), and through mechanochemical synthesis (MCS) followed by annealing has been investigated. MoO 3 , B 2 O 3 and Mg were used as reactants while MgO and NaCl were introduced as diluents. Products were leached in dilute HCl solution and were subjected to X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) examinations. Mo was the major phase component in the VCS products under all the experimental conditions. Mo 2 B, MoB, MoB 2 and Mo 2 B 5 were found as minor phases. Products of MCS contained a mixture of Mo 2 B, MoB, MoB 2 and Mo. After annealing the MCS product at 1400 deg. C for 3 h, single phase α-MoB was obtained.

  2. Ergonomic analysis of radiopharmaceuticals samples preparation process

    International Nuclear Information System (INIS)

    Gomes, Luciene Betzler C.; Santos, Isaac Luquetti dos; Fonseca, Antonio Carlos C. da; Pellini, Marcos Pinto; Rebelo, Ana Maria

    2005-01-01

    The doses of radioisotopes to be administrated in patients for diagnostic effect or therapy are prepared in the radiopharmacological sector. The preparation process adopts techniques that are aimed to reduce the exposition time of the professionals and the absorption of excessive doses for patients. The ergonomic analysis of this process contributes in the prevention of occupational illnesses and to prevent risks of accidents during the routines, providing welfare and security to the involved users and conferring to the process an adequate working standard. In this context it is perceived relevance of studies that deal with the analysis of factors that point with respect to the solution of problems and for establishing proposals that minimize risks in the exercise of the activities. Through a methodology that considers the application of the concepts of Ergonomics, it is searched the improvement of the effectiveness or the quality and reduction of the difficulties lived for the workers. The work prescribed, established through norms and procedures codified will be faced with the work effectively carried through, the real work, shaped to break the correct appreciation, with focus in the activities. This work has as objective to argue an ergonomic analysis of samples preparation process of radioisotopes in the Setor de Radiofarmacia do Hospital Universitario Clementino Fraga Filho da Universidade Federal do Rio de Janeiro (UFRJ). (author)

  3. Mental and Active Preparation: Examining Variations in Women's Processes of Preparing to Leave Abusive Relationships.

    Science.gov (United States)

    Bermea, Autumn M; Khaw, Lyndal; Hardesty, Jennifer L; Rosenbloom, Lindsay; Salerno, Craig

    2017-02-01

    Although the process of leaving abusive relationships has received increased research attention, preparing to leave is still largely understudied. Despite an emphasis on safety planning, not all women take active steps to prepare, and the characteristics and experiences of those who do or do not actively prepare are unknown. We address this gap with a secondary data analysis of interviews with 25 abused mothers in the process of leaving. All women initially engaged in mental planning, where they had emotionally disconnected from their partners. Using constructivist grounded theory techniques, we identified two distinct groups: those whose mental planning led to active planning ( n = 11), and those who moved directly from mental planning to leaving ( n = 14) with little time or need to actively plan. The groups differed on several individual, relationship, and child factors, which may have impacted the ability or decisions to prepare. This study supports the feminist view that survivors are not helpless victims but active agents who strategize for safety. Those who engage solely in mental planning still prepare to leave, even if they do not engage in active planning. Practitioners should consider factors affecting preparations and acknowledge mental planning as a necessary effort in leaving.

  4. Optimal preparation-to-colonoscopy interval in split-dose PEG bowel preparation determines satisfactory bowel preparation quality: an observational prospective study.

    Science.gov (United States)

    Seo, Eun Hee; Kim, Tae Oh; Park, Min Jae; Joo, Hee Rin; Heo, Nae Yun; Park, Jongha; Park, Seung Ha; Yang, Sung Yeon; Moon, Young Soo

    2012-03-01

    Several factors influence bowel preparation quality. Recent studies have indicated that the time interval between bowel preparation and the start of colonoscopy is also important in determining bowel preparation quality. To evaluate the influence of the preparation-to-colonoscopy (PC) interval (the interval of time between the last polyethylene glycol dose ingestion and the start of the colonoscopy) on bowel preparation quality in the split-dose method for colonoscopy. Prospective observational study. University medical center. A total of 366 consecutive outpatients undergoing colonoscopy. Split-dose bowel preparation and colonoscopy. The quality of bowel preparation was assessed by using the Ottawa Bowel Preparation Scale according to the PC interval, and other factors that might influence bowel preparation quality were analyzed. Colonoscopies with a PC interval of 3 to 5 hours had the best bowel preparation quality score in the whole, right, mid, and rectosigmoid colon according to the Ottawa Bowel Preparation Scale. In multivariate analysis, the PC interval (odds ratio [OR] 1.85; 95% CI, 1.18-2.86), the amount of PEG ingested (OR 4.34; 95% CI, 1.08-16.66), and compliance with diet instructions (OR 2.22l 95% CI, 1.33-3.70) were significant contributors to satisfactory bowel preparation. Nonrandomized controlled, single-center trial. The optimal time interval between the last dose of the agent and the start of colonoscopy is one of the important factors to determine satisfactory bowel preparation quality in split-dose polyethylene glycol bowel preparation. Copyright © 2012 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

  5. Advances in preparation and characterization of chitosan nanoparticles for therapeutics.

    Science.gov (United States)

    Chandra Hembram, Krushna; Prabha, Shashi; Chandra, Ramesh; Ahmed, Bahar; Nimesh, Surendra

    2016-01-01

    Polymers have been largely explored for the preparation of nanoparticles due to ease of preparation and modification, large gene/drug loading capacity, and biocompatibility. Various methods have been adapted for the preparation and characterization of chitosan nanoparticles. Focus on the different methods of preparation and characterization of chitosan nanoparticles. Detailed literature survey has been done for the studies reporting various methods of preparation and characterization of chitosan nanoparticles. Published database suggests of several methods which have been developed for the preparation and characterization of chitosan nanoparticles as per the application.

  6. Development of radioisotope preparation and application technology

    Energy Technology Data Exchange (ETDEWEB)

    Han, Hyon Soo; Park, K. B.; Bang, H. S. [and others

    2000-04-01

    The purpose of this project is to develop RI production technology utility 'HANARO' and to construct a sound infra-structure for mass production and supply to domestic users. The developed contents and results are as follows: two types of rig for irradiation in reactor core were designed and manufactured. The safety of OR rig during irradiation was identified through various test and it is used for RI production. The prepared IR rig will be used to performance tests for safety. We prepared two welders and welding jigs for production of sealed sources, and equipments for quality control of the welded materials. Production processes and apparatus Cr-51, P-32, I-125 and Sr-89, were developed. Developed results would be used for routine production and supply of radioisotopes. The automatic Tc-99m extraction apparatus was supplied to Libya under IAEA support. For approval on special form radioactive material of the developed Ir-192 source assembly and projector documents were prepared and submitted to MOST. The high dose rate Ir-192 source(diameter 1.1 mm, length 5.2 mm) for RALS and the laser welding system for its fabrication were developed. Production technologies of Ir-192 sources for destructive test and medical therapy were transferred to private company for commercial supply. The chemical immobilization method based on the self-assemble monolayer of {omega}-functionalized thiol and the sensing scheme based on the beta-emitter labeling method were developed for the fabrication radioimmuno-sensors. Results of this study will be applied to mass production of radioisotopes 'HANARO' and are to contribute the advance of domestic medicine and industry related to radioisotopes.

  7. Orion Ammonia Boiler System Preflight Test Preparations

    Science.gov (United States)

    Levitt, Julia L.

    2017-01-01

    The Environmental Controls and Life Support Systems (ECLSS) branch at Kennedy Space Center (KSC) is currently undergoing preparations for ground testing of the Orion Multi-Purpose Crew Vehicle (MPCV) to prepare its subsystems for EM-1 (Exploration Mission-1). EM-1, Orions second unmanned flight, is a three-week long lunar mission during which the vehicle will complete a 6-day retrograde lunar orbit before returning to Earth. This paper focuses on the work done during the authors 16-week internship with the Mechanical Engineering Branch of KSCs Engineering Directorate. The authors project involved assisting with the preparations for testing the Orion MPCVs ammonia boiler system. The purpose of the ammonia boiler system is to keep the spacecraft sufficiently cool during the reentry portion of its mission, from service module (SM) separation to post-landing. This system is critical for keeping both the spacecraft (avionics and electronics) and crew alive during reentry, thus a successful test of the system is essential to the success of EM-1. XXXX The author was able to draft a detailed outline of the procedure for the ammonia system functional test. More work will need to be done on the vehicle power-up and power-down portions of the procedure, but the ammonia system testing portion of the procedure is thorough and includes vehicle test configurations, vehicle commands, and GSE. The author was able to compile a substantial list of questions regarding the ammonia system functional test with the help of her mentors. A significant number of these questions were answered in the teleconferences with Lockheed Martin.

  8. Development of radioisotope preparation and application technology

    International Nuclear Information System (INIS)

    Han, Hyon Soo; Park, K. B.; Bang, H. S. and others

    2000-04-01

    The purpose of this project is to develop RI production technology utility 'HANARO' and to construct a sound infra-structure for mass production and supply to domestic users. The developed contents and results are as follows: two types of rig for irradiation in reactor core were designed and manufactured. The safety of OR rig during irradiation was identified through various test and it is used for RI production. The prepared IR rig will be used to performance tests for safety. We prepared two welders and welding jigs for production of sealed sources, and equipments for quality control of the welded materials. Production processes and apparatus Cr-51, P-32, I-125 and Sr-89, were developed. Developed results would be used for routine production and supply of radioisotopes. The automatic Tc-99m extraction apparatus was supplied to Libya under IAEA support. For approval on special form radioactive material of the developed Ir-192 source assembly and projector documents were prepared and submitted to MOST. The high dose rate Ir-192 source(diameter 1.1 mm, length 5.2 mm) for RALS and the laser welding system for its fabrication were developed. Production technologies of Ir-192 sources for destructive test and medical therapy were transferred to private company for commercial supply. The chemical immobilization method based on the self-assemble monolayer of ω-functionalized thiol and the sensing scheme based on the beta-emitter labeling method were developed for the fabrication radioimmuno-sensors. Results of this study will be applied to mass production of radioisotopes 'HANARO' and are to contribute the advance of domestic medicine and industry related to radioisotopes

  9. Preparation of Porous Calcium Phosphate Bioceramic

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Porous calcium phosphate ceramics were prepared by slip casting and molding method respectively. By these two different methods, different microstructures can be got. By slip casting method, the pore size was 100- 350μm and 20- 80μm; pores were opened, interconnected and ball-like; the grain size was 2- 4 μm.By molding method, the pore size was 100-500 μm and 1-10μm; the grain size was 2-8μm. By slip casting method regular and interconnected pores can be got. By molding method the porosity and strength can be adjusted easily.

  10. Witness sample preparation for measuring antireflection coatings.

    Science.gov (United States)

    Willey, Ronald R

    2014-02-01

    Measurement of antireflection coating of witness samples from across the worldwide industry has been shown to have excess variability from a sampling taken for the OSA Topical Meeting on Optical Interference Coatings: Measurement Problem. Various sample preparation techniques have been discussed with their limitations, and a preferred technique is recommended with its justification, calibration procedures, and limitations. The common practice of grinding the second side to reduce its reflection is less than satisfactory. One recommended practice is to paint the polished second side, which reduces its reflection to almost zero. A method to evaluate the suitability of given paints is also described.

  11. Preparation techniques for ceramic waste form powder

    International Nuclear Information System (INIS)

    Hash, M.C.; Pereira, C.; Lewis, M.A.

    1997-01-01

    The electrometallurgical treatment of spent nuclear fuels result in a chloride waste salt requiring geologic disposal. Argonne National Laboratory (ANL) is developing ceramic waste forms which can incorporate this waste. Currently, zeolite- or sodalite-glass composites are produced by hot isostatic pressing (HIP) techniques. Powder preparations include dehydration of the raw zeolite powders, hot blending of these zeolite powders and secondary additives. Various approaches are being pursued to achieve adequate mixing, and the resulting powders have been HIPed and characterized for leach resistance, phase equilibria, and physical integrity

  12. Preparation of thoria calcia solid electrolytes

    International Nuclear Information System (INIS)

    Muccillo, R.

    1982-01-01

    The experimental procedures for the preparation of thoria-calcia solid electrolytes are described. Cold-pressed specimens pre-sintered at 1400 0 C and sintered at 2000 0 C have been used for thermally stimulated depolarization currents measurements in the temperature range 100 K - 300 K as well as for ionic conductivity measurements in the temperature range RT - 900 K. The detection of a relaxation peak probably due to the reorientation of the Ca'' sub(Th) - V sup(..) sub(O) complex shows that solid solution has been attained. Preliminary results of electrical conductivity are also reported. (Author) [pt

  13. ATLAS data preparation in run 2

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00037318; The ATLAS collaboration; Chelstowska, Magda Anna; Cuhadar Donszelmann, Tulay; Guenther, Jaroslav; Nairz, Armin Michael; Nicolaidou, Rosy; Shabalina, Elizaveta; Strandberg, Jonas; Taffard, Anyes; Wang, Song-Ming

    2017-01-01

    In this contribution, the data preparation workflows for Run 2 are presented. The challenges posed by the excellent performance and high live time fraction of the LHC are discussed, and the solutions implemented by ATLAS are described. The prompt calibration loop procedures are described and examples are given. Several levels of data quality assessment are used to quickly spot problems in the control room and prevent data loss, and to provide the final selection used for physics analysis. Finally the data quality efficiency for physics analysis is shown.

  14. A procedure for preparing alkali metal hydrides

    International Nuclear Information System (INIS)

    Lemieux, R.U.; Sanford, C.E.; Prescott, J.F.

    1976-01-01

    A plain low cost, procedure for the continuous, low temperature preparation of sodium or potassium hydrides using cheap reagents is presented. Said invention is especially concerned with a process of purifying of a catalytic exchange liquid used for deuterium enrichment, in which an alkali metal hydride is produced as intermediate product. The procedure for producing the sodium and potassium hydrides consists in causing high pressure hydrogen to be absorbed by a mixture of at least a lower monoalkylamine and an alkylamide of an alkali metal from at least one of said amines [fr

  15. Preparation fo nuclear research reactors operators

    International Nuclear Information System (INIS)

    Roedel, G.

    1986-01-01

    The experience obtained with the training of operators of nuclear research reactors is presented. The main tool used in the experiments is the IPR-R1 reactor, a TRIGA MARK I type, owned by Nuclear Technology Development Centre (CDTN) of NUCLEBRAS. The structures of the Research Reactors Operators Training Course and of the Radiological Protection Course, as well as the Operators Qualifying and Requalifying Program, all of them prepared at CDTN are also presented. Mention is made of the application of similar experiments to other groups, such as students coming from Nuclear Sciences and Techniques Course of the Federal University of Minas Gerais. (Author) [pt

  16. Preparation of nuclear research reactors operators

    International Nuclear Information System (INIS)

    Roedel, G.

    1986-01-01

    The experience obtained with the training of operators of nuclear research reactors is presented. The main tool used in the experiments is the IPR-R1 reactor, a TRIGA MARK I type, owned by Nuclear Technology Development Centre (CDTN) of NUCLEBRAS. The structures of the Research Reactors Operators Training Course and of the Radiological Protection Course, as well as the Operators Qualifying and Requalifying Program, all of them prepared at CDTN, are also presented. Mention is made of the application of similar experiments to other groups, such as students coming from Nuclear Sciences and Techniques Course of the Federal University of Minas Gerais. (Author) [pt

  17. Preparation and characterization of bentonite organo clay

    International Nuclear Information System (INIS)

    Bertagnolli, C.; Almeida Neto, A.F.; Silva, M.G.C.

    2009-01-01

    Bentonite clays organically modified have great potential use for environmental remediation, especially in the separation of organic compounds from the water. The aim of this work was the preparation of organophilic clays from 'Verde-Lodo' bentonite clay with the quaternary ammonium salts cetyl-pyridinium chloride and benzalkonium chloride. The materials obtained were characterized by XRD, thermogravimetric analyses, Helium picnometry, SEM and energy dispersive X-ray techniques. The results show consistently successful synthesis of the organoclay through the increase in the basal spacing, as well as salt elimination picks and presence of carbon and chlorine in the modified clays; they are inexistent elements in the natural clay. (author)

  18. Preparing medical physicists for future leadership roles

    International Nuclear Information System (INIS)

    Caruana, Carmel J.

    2017-01-01

    In today's rapidly changing and highly competitive world, being a good scientist is not sufficient for a professional to prosper; good leadership, managerial and strategic planning skills have become essential. The issue of authentic leadership has become of central concern to all healthcare professions, but it is even more crucial for small professions such as Medical Physics. Preparing future leaders should be done in two ways: first by direct interaction with established and successful leaders who would share their experiences (role modelling) and secondly through a formal leadership course in Medical Physics leadership

  19. Preparation of counterion stabilized concentrated silver sols.

    Science.gov (United States)

    LaPlante, Sylas; Halaciuga, Ionel; Goia, Dan V

    2011-07-01

    A strategy for obtaining stable concentrated silver dispersions without dedicated stabilizing agents is presented. This approach consists of rapidly mixing aqueous solutions of silver salicylate and ascorbic acid. By using salicylate as Ag(+) counterion, it is possible to prepare stable sols with metal concentrations up to two orders of magnitude higher than with silver nitrate. The stabilizing effect of the counterion is the result of a decreased ionic strength due to salicylate protonation and its adsorption on the surface of silver. Both effects increase the range of the electrostatic repulsive forces by expanding the electrical double layer. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Stability of extemporaneously prepared rufinamide oral suspensions.

    Science.gov (United States)

    Hutchinson, David J; Liou, Yayin; Best, Robert; Zhao, Fang

    2010-03-01

    Rufinamide is an oral antiepileptic drug indicated for adjunctive therapy in treating generalized seizures associated with Lennox-Gastaut syndrome. Currently, rufinamide is available as 200-mg and 400-mg tablets. A liquid dosage form does not exist at the present time. Lack of a suspension formulation may present an administration problem for many children and adults who are unable to swallow tablets. The availability of a liquid dosage form will provide an easy and accurate way to measure and administer the medication. To determine the stability of both sugar-containing and sugar-free rufinamide suspensions over a 90-day period. A suspension of rufinamide 40 mg/mL was prepared by grinding twelve 400-mg tablets of rufinamide tablets in a glass mortar. Sixty milliliters of Ora-Plus and 60 mL of either Ora-Sweet or Ora-Sweet SF (sugar free) were mixed and added to the powder to make a final volume of 120 mL. Three identical samples of each formulation were prepared and placed in 60-mL amber plastic bottles and were stored at room temperature. A 1-mL sample was withdrawn from each of the 6 bottles with a micropipette immediately after preparation and at 7, 14, 28, 56, and 90 days. After further dilution to an expected concentration of 0.4 mg/mL, the samples were assayed using high-performance liquid chromatography. Stability was defined as the retention of at least 90% of the initial concentration. At least 90% of the initial rufinamide concentration remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH and no visible microbial growth. Extemporaneously compounded suspensions of rufinamide 40 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet or Ora-Sweet SF were stable for at least 90 days when stored in 59-mL amber polypropylene plastic bottles at room temperature.