WorldWideScience

Sample records for preliminary test runs

  1. GASIFICATION TEST RUN TC06

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services, Inc.

    2003-08-01

    This report discusses test campaign TC06 of the Kellogg Brown & Root, Inc. (KBR) Transport Reactor train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Reactor is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using a particulate control device (PCD). The Transport Reactor was operated as a pressurized gasifier during TC06. Test run TC06 was started on July 4, 2001, and completed on September 24, 2001, with an interruption in service between July 25, 2001, and August 19, 2001, due to a filter element failure in the PCD caused by abnormal operating conditions while tuning the main air compressor. The reactor temperature was varied between 1,725 and 1,825 F at pressures from 190 to 230 psig. In TC06, 1,214 hours of solid circulation and 1,025 hours of coal feed were attained with 797 hours of coal feed after the filter element failure. Both reactor and PCD operations were stable during the test run with a stable baseline pressure drop. Due to its length and stability, the TC06 test run provided valuable data necessary to analyze long-term reactor operations and to identify necessary modifications to improve equipment and process performance as well as progressing the goal of many thousands of hours of filter element exposure.

  2. 40 CFR 92.126 - Test run.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Test run. 92.126 Section 92.126... POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.126 Test run. (a) The following steps... water from the pretest value, the test is void. (7)(i) For bag samples, as soon as possible transfer...

  3. 40 CFR 86.1438 - Test run-EPA.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Test run-EPA. 86.1438 Section 86.1438... Short Test Procedures § 86.1438 Test run—EPA. (a) This section describes the test run performed by the... prior to conduct of the CST. The test run consists of the wait time, vehicle preconditioning, and...

  4. A Runs-Test Algorithm: Contingent Reinforcement and Response Run Structures

    Science.gov (United States)

    Hachiga, Yosuke; Sakagami, Takayuki

    2010-01-01

    Four rats' choices between two levers were differentially reinforced using a runs-test algorithm. On each trial, a runs-test score was calculated based on the last 20 choices. In Experiment 1, the onset of stimulus lights cued when the runs score was smaller than criterion. Following cuing, the correct choice was occasionally reinforced with food,…

  5. 40 CFR 86.1234-96 - Running loss test.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Running loss test. 86.1234-96 Section... Methanol-Fueled Heavy-Duty Vehicles § 86.1234-96 Running loss test. (a) Overview. Gasoline- and methanol-fueled vehicles are to be tested for running loss emissions during simulated high-temperature...

  6. 49 CFR 238.319 - Running brake test.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Running brake test. 238.319 Section 238.319... Requirements for Tier I Passenger Equipment § 238.319 Running brake test. (a) As soon as conditions safely permit, a running brake test shall be performed on each passenger train after the train has received,...

  7. 40 CFR 90.409 - Engine dynamometer test run.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine dynamometer test run. 90.409... Test Procedures § 90.409 Engine dynamometer test run. (a) Engine and dynamometer start-up. (1) Only... practice. (3) For Phase 1 engines, at the manufacturer's option, the engine can be run with the throttle...

  8. 40 CFR 86.1537 - Idle test run.

    Science.gov (United States)

    2010-07-01

    ... test run. The following steps shall be taken for each test: (a) Check the device(s) for removing water from the exhaust sample and the sample filter(s). Remove any water from the water trap(s). Clean and... test run, the test is void. ...

  9. 40 CFR 86.1437 - Test run-manufacturer.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Test run-manufacturer. 86.1437 Section... Trucks; Certification Short Test Procedures § 86.1437 Test run—manufacturer. (a) This section describes the test run performed by the manufacturer for its data submittal pursuant to obtaining a...

  10. 40 CFR 86.1337-2007 - Engine dynamometer test run.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Engine dynamometer test run. 86.1337... Procedures § 86.1337-2007 Engine dynamometer test run. (a) The following steps shall be taken for each test...) Immediately after the engine is turned off, turn off the engine cooling fan(s) if used. As soon as...

  11. 40 CFR 86.1337-96 - Engine dynamometer test run.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Engine dynamometer test run. 86.1337... Procedures § 86.1337-96 Engine dynamometer test run. (a) The following steps shall be taken for each test: (1... system from the CVS). As soon as possible, transfer the “cold start cycle” exhaust and dilution air...

  12. 40 CFR 86.884-12 - Test run.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Test run. 86.884-12 Section 86.884-12... Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-12 Test run. (a) The temperature of the air... may be used, if desired, but no allowance will be made for possible increased smoke emissions...

  13. 76 FR 10578 - Cuffs Run Pumped Storage, LLC; Notice of Preliminary Permit Application Accepted for Filing and...

    Science.gov (United States)

    2011-02-25

    ... Energy Regulatory Commission Cuffs Run Pumped Storage, LLC; Notice of Preliminary Permit Application... 18, 2010, Cuffs Run Pumped Storage, LLC filed an application for a preliminary permit, pursuant to section 4(f) of the Federal Power Act, proposing to study the feasibility of the Cuffs Run Pumped...

  14. Running cosmological constant with observational tests

    CERN Document Server

    Geng, Chao-Qiang; Zhang, Kaituo

    2016-01-01

    We investigate the running cosmological constant model with dark energy linearly proportional to the Hubble parameter, $\\Lambda = \\sigma H + \\Lambda_0$, in which the $\\Lambda$CDM limit is recovered by taking $\\sigma=0$. We derive the linear perturbation equations of gravity under the Friedmann-Lema\\"itre-Robertson-Walker cosmology, and show the power spectra of the CMB temperature and matter density distribution. By using the Markov chain Monte Carlo method, we fit the model to the current observational data and find that $\\sigma H_0/ \\Lambda_0 \\lesssim 2.63 \\times 10^{-2}$ and $6.74 \\times 10^{-2}$ for $\\Lambda(t)$ coupled to matter and radiation-matter, respectively, along with constraints on other cosmological parameters.

  15. Running cosmological constant with observational tests

    Directory of Open Access Journals (Sweden)

    Chao-Qiang Geng

    2016-09-01

    Full Text Available We investigate the running cosmological constant model with dark energy linearly proportional to the Hubble parameter, Λ=σH+Λ0, in which the ΛCDM limit is recovered by taking σ=0. We derive the linear perturbation equations of gravity under the Friedmann–Lemaïtre–Robertson–Walker cosmology, and show the power spectra of the CMB temperature and matter density distribution. By using the Markov chain Monte Carlo method, we fit the model to the current observational data and find that σH0/Λ0≲2.63×10−2 and 6.74×10−2 for Λ(t coupled to matter and radiation-matter, respectively, along with constraints on other cosmological parameters.

  16. Running cosmological constant with observational tests

    Science.gov (United States)

    Geng, Chao-Qiang; Lee, Chung-Chi; Zhang, Kaituo

    2016-09-01

    We investigate the running cosmological constant model with dark energy linearly proportional to the Hubble parameter, Λ = σH +Λ0, in which the ΛCDM limit is recovered by taking σ = 0. We derive the linear perturbation equations of gravity under the Friedmann-Lemaïtre-Robertson-Walker cosmology, and show the power spectra of the CMB temperature and matter density distribution. By using the Markov chain Monte Carlo method, we fit the model to the current observational data and find that σH0 /Λ0 ≲ 2.63 ×10-2 and 6.74 ×10-2 for Λ (t) coupled to matter and radiation-matter, respectively, along with constraints on other cosmological parameters.

  17. 75 FR 78984 - South Run Pumped Storage, LLC; Notice of Preliminary Permit Application Accepted for Filing and...

    Science.gov (United States)

    2010-12-17

    ... Energy Regulatory Commission South Run Pumped Storage, LLC; Notice of Preliminary Permit Application..., 2010. On October 26, 2010, South Run Pumped Storage, LLC, Massachusetts, filed an application for a... feasibility of the South Run Pumped Storage Project (South Run Project or project) to be located on South...

  18. Validity of the modified Conconi running test.

    Science.gov (United States)

    Sentija, D; Vucetic, V; Markovic, G

    2007-12-01

    The aim of this study was to assess the validity of a fast ramp treadmill protocol for determination of the heart rate deflection point (HR (dp)) and speed of deflection (S (dp)) in trained runners. Fifty-one trained male runners performed a standard (T (stand); speed increase 1 km . h (-1) every 60 s) and a fast (T (fast); speed increase 1 km . h (-1) every 30 s) incremental treadmill test until volitional exhaustion. Heart rate was continuously recorded, and the HR (dp) was estimated after data averaging as the point of deflection in the linear speed/HR relationship. The HR (dp) and S (dp) recorded in T (fast) were compared with the corresponding values obtained in T (stand) by examining the Student's T-test, correlation coefficient (r), and limits of agreement (LoA). The HR (dp) recorded during standard and fast treadmill protocol were highly correlated (r = 0.92, p increased significantly with the faster ramp function (p increase 1 km x h (-1) every 30 s) may be used for determination of the HR (dp) in trained runners, while S (dp) is protocol dependent and caution is warranted regarding its practical applicability.

  19. Reliability and validity of the maximal anaerobic running test.

    Science.gov (United States)

    Nummela, A; Alberts, M; Rijntjes, R P; Luhtanen, P; Rusko, H

    1996-07-01

    Physically active men (n = 13) twice performed the Maximal Anaerobic Running Test (MART) on a treadmill and once the Wingate Anaerobic Test (WAnT) on a cycle ergometer. The MART consisted of n 20-s runs with 100-s recovery between the runs. The speed of the first run was 14.6 km.h-1 and the inclination 4 degrees. Thereafter, the speed was increased by 1.37 km.h-1 every run until exhaustion. During all tests oxygen uptake was measured breath-by-breath and blood samples were taken from the fingertip 40s after each run to determine the lactate concentration (BLa). Power at submaximal BLa levels and maximal power (P5mM, P10mM and Pmax, respectively) were calculated and P was expressed as the oxygen demand of running according to the American College of Sports Medicine equation. In the MART the Pmax was 108 ml.kg-1.min-1 and peak BLa was 15.6 mM. The reliability for the power indices in the MART were as follows: r = 0.92 (p cycle ergometer test measure slightly different qualities.

  20. Peak treadmill running velocity during the VO2 max test predicts running performance.

    Science.gov (United States)

    Noakes, T D; Myburgh, K H; Schall, R

    1990-01-01

    Twenty specialist marathon runners and 23 specialist ultra-marathon runners underwent maximal exercise testing to determine the relative value of maximum oxygen consumption (VO2max), peak treadmill running velocity, running velocity at the lactate turnpoint, VO2 at 16 km h-1, % VO2max at 16 km h-1, and running time in other races, for predicting performance in races of 10-90 km. Race time at 10 or 21.1 km was the best predictor of performance at 42.2 km in specialist marathon runners and at 42.2 and 90 km in specialist ultra-marathon runners (r = 0.91-0.97). Peak treadmill running velocity was the best laboratory-measured predictor of performance (r = -0.88(-)-0.94) at all distances in ultra-marathon specialists and at all distances except 42.2 km in marathon specialists. Other predictive variables were running velocity at the lactate turnpoint (r = -0.80(-)-0.92); % VO2max at 16 km h-1 (r = 0.76-0.90) and VO2max (r = 0.55(-)-0.86). Peak blood lactate concentrations (r = 0.68-0.71) and VO2 at 16 km h-1 (r = 0.10-0.61) were less good predictors. These data indicate: (i) that in groups of trained long distance runners, the physiological factors that determine success in races of 10-90 km are the same; thus there may not be variables that predict success uniquely in either 10 km, marathon or ultra-marathon runners, and (ii) that peak treadmill running velocity is at least as good a predictor of running performance as is the lactate turnpoint. Factors that determine the peak treadmill running velocity are not known but are not likely to be related to maximum rates of muscle oxygen utilization.

  1. Data reproducibility of pace strategy in a laboratory test run

    Science.gov (United States)

    de França, Elias; Xavier, Ana Paula; Hirota, Vinicius Barroso; Côrrea, Sônia Cavalcanti; Caperuto, Érico Chagas

    2016-01-01

    This data paper contains data related to a reproducibility test for running pacing strategy in an intermittent running test until exhaustion. Ten participants underwent a crossover study (test and retest) with an intermittent running test. The test was composed of three-minute sets (at 1 km/h above Onset Blood Lactate Accumulation) until volitional exhaustion. To assess pace strategy change, in the first test participants chose the rest time interval (RTI) between sets (ranging from 30 to 60 s) and in the second test the maximum RTI values were either the RTI chosen in the first test (maximum RTI value), or less if desired. To verify the reproducibility of the test, rating perceived exertion (RPE), heart rate (HR) and blood plasma lactate concentration ([La]p) were collected at rest, immediately after each set and at the end of the tests. As results, RTI, RPE, HR, [La]p and time to exhaustion were not statistically different (p>0.05) between test and retest, as well as they demonstrated good intraclass correlation. PMID:27081672

  2. Power Systems Development Facility Gasification Test Run TC11

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2003-04-30

    This report discusses Test Campaign TC11 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed gasifier designed to operate as either a combustor or a gasifier in air- or oxygen-blown mode of operation using a particulate control device (PCD). Test run TC11 began on April 7, 2003, with startup of the main air compressor and the lighting of the gasifier start-up burner. The Transport Gasifier operated until April 18, 2003, when a gasifier upset forced the termination of the test run. Over the course of the entire test run, gasifier temperatures varied between 1,650 and 1,800 F at pressures from 160 to 200 psig during air-blown operations and around 135 psig during enriched-air operations. Due to a restriction in the oxygen-fed lower mixing zone (LMZ), the majority of the test run featured air-blown operations.

  3. APEX: A Prime EXperiment at Jefferson Lab - Test Run Results and Full Run Plans; Update

    Energy Technology Data Exchange (ETDEWEB)

    Beacham, James [Ohio University, JLAB

    2015-06-01

    APEX is an experiment at Thomas Jefferson National Accelerator Facility (JLab) in Virginia, USA, that searches for a new gauge boson (A') with sub-GeV mass and coupling to ordinary matter of g' ~ (10-6 - 10⁻²)e. Electrons impinge upon a fixed target of high-Z material. An A' is produced via a process analogous to photon bremsstrahlung, decaying to an e⁺+e⁻ pair. A test run was held in July of 2010, covering mA' = 175 to 250 MeV and couplings g'/e > 10⁻³. A full run is approved and will cover mA' ~ 65 to 525 MeV and g'/e > 2.3 x 10⁻⁴, and is expected to occur sometime in 2016 or 2017.

  4. 40 CFR 86.134-96 - Running loss test.

    Science.gov (United States)

    2010-07-01

    ... be set to operate in “automatic” temperature and fan modes with the system set at 72 °F. (vii... conditioning systems shall be set to operate in “automatic” temperature and fan modes with the system set at 72...-fueled vehicles are to be tested for running loss emissions during simulated high-temperature urban...

  5. Running economy assessment within cardiopulmonary exercise testing for recreational runners.

    Science.gov (United States)

    Engeroff, Tobias; Bernardi, Andreas; Vogt, Lutz; Banzer, Winfried

    2016-03-01

    The aim of this study was to evaluate the influence of running economy (RE) on running performance within recreational runners of different maximal aerobic capacity, and the feasibility of RE assessment within routine cardiopulmonary exercise testing (CPET). Sixty-eight recreational runners (m: 49, f: 19; age: 21-54) completed a graded exercise test (GXT) until exhaustion. Maximal oxygen uptake and respiratory compensation point were obtained via CPET. RE was calculated as relative oxygen uptake per covered distance (mL/kg/km) one step below respiratory compensation point (RCP). Subjects were grouped for RE via median split and categorized into one of six fitness levels (Very Poor, Poor, Fair, Good, Excellent, Superior) (ACSM 2010). Irrespective of fitness levels, recreational runners with a more energy efficient movement (REVO2max values ranged between 35.2 and 66.0 ml/min/kg. Running velocity at RCP of runners within VO2max categories Good and Superior differed significantly (P<0.05) between RE groups. This study provides evidence that RE influences submaximal running performance in recreational distance runners within a broad range of maximal aerobic capacity. Complementing routine CPET with RE assessment at physiological threshold intensities and ACSM based categorization seems feasible to delineate the impact of movement efficiency and aerobic fitness on performance in recreational runners.

  6. Test of the classic model for predicting endurance running performance.

    Science.gov (United States)

    McLaughlin, James E; Howley, Edward T; Bassett, David R; Thompson, Dixie L; Fitzhugh, Eugene C

    2010-05-01

    To compare the classic physiological variables linked to endurance performance (VO2max, %VO2max at lactate threshold (LT), and running economy (RE)) with peak treadmill velocity (PTV) as predictors of performance in a 16-km time trial. Seventeen healthy, well-trained distance runners (10 males and 7 females) underwent laboratory testing to determine maximal oxygen uptake (VO2max), RE, percentage of maximal oxygen uptake at the LT (%VO2max at LT), running velocity at LT, and PTV. Velocity at VO2max (vVO2max) was calculated from RE and VO2max. Three stepwise regression models were used to determine the best predictors (classic vs treadmill performance protocols) for the 16-km running time trial. Simple Pearson correlations of the variables with 16-km performance showed vVO2max to have the highest correlation (r = -0.972) and %VO2max at the LT the lowest (r = 0.136). The correlation coefficients for LT, VO2max, and PTV were very similar in magnitude (r = -0.903 to r = -0.892). When VO2max, %VO2max at LT, RE, and PTV were entered into SPSS stepwise analysis, VO2max explained 81.3% of the total variance, and RE accounted for an additional 10.7%. vVO2max was shown to be the best predictor of the 16-km performance, accounting for 94.4% of the total variance. The measured velocity at VO2max (PTV) was highly correlated with the estimated velocity at vVO2max (r = 0.8867). Among well-trained subjects heterogeneous in VO2max and running performance, vVO2max is the best predictor of running performance because it integrates both maximal aerobic power and the economy of running. The PTV is linked to the same physiological variables that determine vVO2max.

  7. A preliminary study of a running speed based heart rate prediction during an incremental treadmill exercise.

    Science.gov (United States)

    Dae-Geun Jang; Byung-Hoon Ko; Sub Sunoo; Sang-Seok Nam; Hun-Young Park; Sang-Kon Bae

    2016-08-01

    This preliminary study investigates feasibility of a running speed based heart rate (HR) prediction. It is basically motivated from the assumption that there is a significant relationship between HR and the running speed. In order to verify the assumption, HR and running speed data from 217 subjects of varying aerobic capabilities were simultaneously collected during an incremental treadmill exercise. A running speed was defined as a treadmill speed and its corresponding heart rate was calculated by averaging the last one minute HR values of each session. The feasibility was investigated by assessing a correlation between the heart rate and the running speed using inter-subject (between-subject) and intra-subject (within-subject) datasets with regression orders of 1, 2, 3, and 4, respectively. Furthermore, HR differences between actual and predicted HRs were also employed to investigate the feasibility of the running speed in predicting heart rate. In the inter-subject analysis, a strong positive correlation and a reasonable HR difference (r = 0.866, 16.55±11.24 bpm @ 1st order; r = 0.871, 15.93±11.49 bpm @ 2nd order; r = 0.897, 13.98±10.80 bpm @ 3rd order; and r = 0.899, 13.93±10.64 bpm @ 4th order) were obtained, and a very high positive correlation and a very low HR difference (r = 0.978, 6.46±3.89 bpm @ 1st order; r = 0.987, 5.14±2.87 bpm @ 2nd order; r = 0.996, 2.61±2.03 bpm @ 3rd order; and r = 0.997, 2.04±1.73 bpm @ 4th order) were obtained in the intra-subject analysis. It can therefore be concluded that 1) heart rate is highly correlated with a running speed; 2) heart rate can be approximately estimated by a running speed with a proper statistical model (e.g., 3rd-order regression); and 3) an individual HR-speed calibration process may improve the prediction accuracy.

  8. Limited measurement dependence in multiple runs of a Bell test

    Science.gov (United States)

    Pope, James E.; Kay, Alastair

    2013-09-01

    The assumption of free will—the ability of an experimentalist to make random choices—is central to proving the indeterminism of quantum resources, the primary tool in quantum cryptography. Relaxing the assumption in a Bell test allows violation of the usual classical threshold by correlating the random number generators used to select measurements with the devices that perform them. In this paper, we examine not only these correlations, but those across multiple runs of the experiment. This enables an explicit exposition of the optimal cheating strategy and how the correlations manifest themselves within this strategy. Similar to other recent results, we prove that there remain Bell violations for a sufficiently high, yet nonmaximal degree of free will which cannot be simulated by a classical attack, regardless of how many runs of the experiment those choices are correlated over.

  9. Safety evaluation of the ITP filter/stripper test runs and quiet time runs using simulant solution. Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, M.K.

    1994-06-01

    The purpose is to provide the technical bases for the evaluation of Unreviewed Safety Question for the In-Tank Precipitation (ITP) Filter/Stripper Test Runs (Ref. 7) and Quiet Time Runs Program (described in Section 3.6). The Filter/Stripper Test Runs and Quiet Time Runs program involves a 12,000 gallon feed tank containing an agitator, a 4,000 gallon flush tank, a variable speed pump, associated piping and controls, and equipment within both the Filter and the Stripper Building.

  10. A LABORATORY TEST FOR THE EXAMINATION OF ALACTIC RUNNING PERFORMANCE

    Directory of Open Access Journals (Sweden)

    Armin Kibele

    2005-12-01

    Full Text Available A new testing procedure is introduced to evaluate the alactic running performance in a 10s sprint task with near-maximal movement velocity. The test is performed on a motor-equipped treadmill with inverted polarity that increases mechanical resistance instead of driving the treadmill belt. As a result, a horizontal force has to be exerted against the treadmill surface in order to overcome the resistant force of the engine and to move the surface in a backward direction. For this task, subjects lean with their hands towards the front safety barrier of the treadmill railing with a slightly inclined body posture. The required skill resembles the pushing movement of bobsleigh pilots at the start of a race. Subjects are asked to overcome this mechanical resistance and to cover as much distance as possible within a time period of 10 seconds. Fifteen male students (age: 27.7 ± 4.1 years, body height: 1.82 ± 0.46 m, body mass: 78.3 ± 6.7 kg participated in a study. As the resistance force was set to 134 N, subjects ran 35.4 ± 2.6 m on the average corresponding to a mean running velocity of 3.52 ± 0.25 m·s-1. The validity of the new test was examined by statistical inference with various measures related to alactic performance including a metabolic equivalent to estimate alactic capacity (2892 ± 525 mL O2, an estimate for the oxygen debt (2662 ± 315 ml, the step test by Margaria to estimate alactic energy flow (1691 ± 171 W, and a test to measure the maximal strength in the leg extensor muscles (2304 ± 351 N. The statistical evaluation showed that the new test is in good agreement with the theoretical assumptions for alactic performance. Significant correlation coefficients were found between the test criteria and the measures for alactic capacity (r = 0.79, p < 0.01 as well as alactic power (r = 0.77, p < 0.01. The testing procedure is easy to administer and it is best suited to evaluate the alactic capacity for bobsleigh pilots as well as for

  11. Power Systems Development Facility Gasification Test Run TC09

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2002-09-30

    This report discusses Test Campaign TC09 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed gasifier designed to operate as either a combustor or a gasifier in air- or oxygen-blown mode of operation using a particulate control device (PCD). The Transport Gasifier was operated as a pressurized gasifier during TC09 in air- and oxygen-blown modes. Test Run TC09 was started on September 3, 2002, and completed on September 26, 2002. Both gasifier and PCD operations were stable during the test run, with a stable baseline pressure drop. The oxygen feed supply system worked well and the transition from air to oxygen was smooth. The gasifier temperature varied between 1,725 and 1,825 F at pressures from 125 to 270 psig. The gasifier operates at lower pressure during oxygen-blown mode due to the supply pressure of the oxygen system. In TC09, 414 hours of solid circulation and over 300 hours of coal feed were attained with almost 80 hours of pure oxygen feed.

  12. Power Systems Development Facility Gasification Test Run TC08

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2002-06-30

    This report discusses Test Campaign TC08 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed gasifier designed to operate as either a combustor or a gasifier in air- or oxygen-blown mode using a particulate control device (PCD). The Transport Gasifier was operated as a pressurized gasifier in air- and oxygen-blown modes during TC08. Test Run TC08 was started on June 9, 2002 and completed on June 29. Both gasifier and PCD operations were stable during the test run with a stable baseline pressure drop. The oxygen feed supply system worked well and the transition from air to oxygen blown was smooth. The gasifier temperature was varied between 1,710 and 1,770 F at pressures from 125 to 240 psig. The gasifier operates at lower pressure during oxygen-blown mode due to the supply pressure of the oxygen system. In TC08, 476 hours of solid circulation and 364 hours of coal feed were attained with 153 hours of pure oxygen feed. The gasifier and PCD operations were stable in both enriched air and 100 percent oxygen blown modes. The oxygen concentration was slowly increased during the first transition to full oxygen-blown operations. Subsequent transitions from air to oxygen blown could be completed in less than 15 minutes. Oxygen-blown operations produced the highest synthesis gas heating value to date, with a projected synthesis gas heating value averaging 175 Btu/scf. Carbon conversions averaged 93 percent, slightly lower than carbon conversions achieved during air-blown gasification.

  13. Power Systems Development Facility Gasification Test Run TC10

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2002-12-30

    This report discusses Test Campaign TC10 of the Kellogg Brown & Root, Inc. (KBR) Transport Gasifier train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Gasifier is an advanced circulating fluidized-bed gasifier designed to operate as either a combustor or a gasifier in air- or oxygen-blown mode of operation using a particulate control device (PCD). The Transport Gasifier was operated as a pressurized gasifier during TC10 in air- (mainly for transitions and problematic operations) and oxygen-blown mode. Test Run TC10 was started on November 16, 2002, and completed on December 18, 2002. During oxygen-blown operations, gasifier temperatures varied between 1,675 and 1,825 F at pressures from 150 to 180 psig. After initial adjustments were made to reduce the feed rate, operations with the new fluidized coal feeder were stable with about half of the total coalfeed rate through the new feeder. However, the new fluidized-bed coal feeder proved to be difficult to control at low feed rates. Later the coal mills and original coal feeder experienced difficulties due to a high moisture content in the coal from heavy rains. Additional operational difficulties were experienced when several of the pressure sensing taps in the gasifier plugged. As the run progressed, modifications to the mills (to address processing the wet coal) resulted in a much larger feed size. This eventually resulted in the accumulation of large particles in the circulating solids causing operational instabilities in the standpipe and loop seal. Despite problems with the coal mills, coal feeder, pressure tap nozzles and the standpipe, the gasifier did experience short periods of stability during oxygenblown operations. During these periods, the syngas quality was high. During TC10, the gasifier gasified over 609 tons of Powder River Basin subbituminous coal and

  14. The discriminative power of the Interval Shuttle Run Test and the Maximal Multistage Shuttle Run Test for playing level of soccer

    NARCIS (Netherlands)

    Lemmink, K.A.P.M.; Verheijen, R.; Visscher, C.

    2004-01-01

    AIM: The purpose of this study was to examine the discriminative power of the recently developed Interval Shuttle Run Test (ISRT) and the widely used Maximal Multistage 20 m Shuttle Run Test (MMSRT) for soccer players at different levels of competition. The main difference between the tests is that

  15. Test Run Report of the P348 Collaboration

    CERN Document Server

    Gninenko, S N

    2015-01-01

    The P348 Collaboration preformed test measurements in the H4 SPS beam line during a period of 2 weeks in September-October. The measurements were designed with two main objectives. The first was to test the new detector components such as Micromegas and straw tube tracker, high-energy electron tagging system, ECAL, and HCAL. The second was to explore the feasibility of searching for invisible decays of dark photons in the sub- GeV mass range. Here we report various results of the test measurements. The main outcome of the run is that by using simple selection criteria, without good track definition, we reject background in the signal region down to the level of a few ×10^−8 per incident electron. As we do not see any other issues that represent fundamental problems for the experiment, our conclusion is that after small modifications the P348 detector is ready to start data taking in the year 2016. We recall that the A‘ with a mass in sub-GeV range is still one of the favorable explanation of the muon g-2...

  16. Power Systems Development Facility Gasification Test Run TC07

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2002-04-05

    This report discusses Test Campaign TC07 of the Kellogg Brown & Root, Inc. (KBR) Transport Reactor train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Reactor is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using a particulate control device (PCD). The Transport Reactor was operated as a pressurized gasifier during TC07. Prior to TC07, the Transport Reactor was modified to allow operations as an oxygen-blown gasifier. Test Run TC07 was started on December 11, 2001, and the sand circulation tests (TC07A) were completed on December 14, 2001. The coal-feed tests (TC07B-D) were started on January 17, 2002 and completed on April 5, 2002. Due to operational difficulties with the reactor, the unit was taken offline several times. The reactor temperature was varied between 1,700 and 1,780 F at pressures from 200 to 240 psig. In TC07, 679 hours of solid circulation and 442 hours of coal feed, 398 hours with PRB coal and 44 hours with coal from the Calumet mine, and 33 hours of coke breeze feed were attained. Reactor operations were problematic due to instrumentation problems in the LMZ resulting in much higher than desired operating temperatures in the reactor. Both reactor and PCD operations were stable and the modifications to the lower part of the gasifier performed well while testing the gasifier with PRB coal feed.

  17. 40 CFR 86.237-94 - Dynamometer test run, gaseous emissions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Dynamometer test run, gaseous... test run, gaseous emissions. (a) The complete dynamometer test consists of a cold start drive of... terminates after the first period (505 seconds) is run. (d) The provisions of § 86.137(b) apply to...

  18. 40 CFR 86.137-90 - Dynamometer test run, gaseous and particulate emissions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Dynamometer test run, gaseous and... New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures § 86.137-90 Dynamometer test run, gaseous... first period (505 seconds) is run. (2) Petroleum-fueled and methanol-fueled diesel vehicles. The...

  19. 40 CFR 1045.501 - How do I run a valid emission test?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I run a valid emission test... Procedures § 1045.501 How do I run a valid emission test? (a) Applicability. This subpart is addressed to you... maximum test speed. (g) Special and alternate procedures. If you are unable to run the duty...

  20. AGR-2 Irradiation Test Final As-Run Report

    Energy Technology Data Exchange (ETDEWEB)

    Collin, Blaise P. [Idaho National Lab. (INL), Idaho Falls, ID (United States). VHTR Program

    2014-08-01

    This document presents the as-run analysis of the AGR-2 irradiation experiment. AGR-2 is the second of the planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the U.S. Department of Energy as part of the Very High Temperature Reactor (VHTR) Technical Development Office (TDO) program. The objectives of the AGR-2 experiment are to: (a) Irradiate UCO (uranium oxycarbide) and UO2 (uranium dioxide) fuel produced in a large coater. Fuel attributes are based on results obtained from the AGR-1 test and other project activities. (b) Provide irradiated fuel samples for post-irradiation experiment (PIE) and safety testing. (c) Support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. The primary objective of the test was to irradiate both UCO and UO2 TRISO (tri-structural isotropic) fuel produced from prototypic scale equipment to obtain normal operation and accident condition fuel performance data. The UCO compacts were subjected to a range of burnups and temperatures typical of anticipated prismatic reactor service conditions in three capsules. The test train also includes compacts containing UO2 particles produced independently by the United States, South Africa, and France in three separate capsules. The range of burnups and temperatures in these capsules were typical of anticipated pebble bed reactor service conditions. The results discussed in this report pertain only to U.S. produced fuel.

  1. AGR-2 Irradiation Test Final As-Run Report

    Energy Technology Data Exchange (ETDEWEB)

    Collin, Blaise P. [Idaho National Lab. (INL), Idaho Falls, ID (United States). VHTR Program

    2014-08-01

    This document presents the as-run analysis of the AGR-2 irradiation experiment. AGR-2 is the second of the planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the U.S. Department of Energy as part of the Very High Temperature Reactor (VHTR) Technology Development Office (TDO) program. The objectives of the AGR-2 experiment are to: 1. Irradiate UCO (uranium oxycarbide) and UO2 (uranium dioxide) fuel produced in a large coater. Fuel attributes are based on results obtained from the AGR-1 test and other project activities. 2. Provide irradiated fuel samples for post-irradiation experiment (PIE) and safety testing. 3. Support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. The primary objective of the test was to irradiate both UCO and UO2 TRISO (tristructural isotropic) fuel produced from prototypic scale equipment to obtain normal operation and accident condition fuel performance data. The UCO compacts were subjected to a range of burnups and temperatures typical of anticipated prismatic reactor service conditions in three capsules. The test train also includes compacts containing UO2 particles produced independently by the United States, South Africa, and France in three separate capsules. The range of burnups and temperatures in these capsules were typical of anticipated pebble bed reactor service conditions. The results discussed in this report pertain only to U.S.-produced fuel.

  2. LHC to skip low-energy test runs

    CERN Multimedia

    Cartwright, Jon

    2007-01-01

    "The Large Hadron Collider will not be ready in time to perform a low-energy "engineering run", which was originally scheduled to take place this November, according to an official at CERN. This will leave the operators no chance to gain exerinece with the particle accelerator's steering and detection systems before the high-energy runs begin in spring next year." (1 page)

  3. Preliminary Results of Field Emission Cathode Tests

    Science.gov (United States)

    Sovey, James S.; Kovaleski, Scott D.

    2001-01-01

    Preliminary screening tests of field emission cathodes such as chemical vapor deposited (CVD) diamond, textured pyrolytic graphite, and textured copper were conducted at background pressures typical of electric thruster test facilities to assess cathode performance and stability. Very low power electric thrusters which provide tens to hundreds micronewtons of thrust may need field emission neutralizers that have a capability of tens to hundreds of microamperes. From current voltage characteristics, it was found that the CVD diamond and textured metals cathodes clearly satisfied the Fowler-Nordheim emission relation. The CVD diamond and a textured copper cathode had average current densities of 270 and 380 mA/sq cm, respectively, at the beginning-of-life. After a few hours of operation the cathode emission currents degraded by 40 to 75% at background pressures in the 10(exp -5) Pa to 10(exp -4) Pa range. The textured pyrolytic graphite had a modest current density at beginning-of-life of 84 mA/sq cm, but this cathode was the most stable of all. Extended testing of the most promising cathodes is warranted to determine if current degradation is a burn-in effect or whether it is a long-term degradation process. Preliminary experiments with ferroelectric emission cathodes, which are ceramics with spontaneous electric polarization, were conducted. Peak current densities of 30 to 120 mA/sq cm were obtained for pulse durations of about 500 ns in the 10(exp -4) Pa pressure range.

  4. The interval shuttle run test for intermittent sport players : evaluation of reliability

    NARCIS (Netherlands)

    Lemmink, K.A.P.M.; Visscher, C.; Lambert, M.I.; Lamberts, R.P.

    2004-01-01

    The reliability of the interval shuttle run test (ISRT) as a submaximal and maximal field test to measure intermittent endurance capacity was examined. During the ISRT, participants alternately run for 30 seconds and walk for 15 seconds. The running speed is increased from 10 km.h(-1) every 90 secon

  5. 40 CFR 1048.501 - How do I run a valid emission test?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I run a valid emission test... § 1048.501 How do I run a valid emission test? (a) Use the equipment and procedures for spark-ignition... 86.132-96(h) and then operate the engine for 60 minutes over repeat runs of the duty cycle...

  6. 40 CFR 1054.501 - How do I run a valid emission test?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I run a valid emission test... Procedures § 1054.501 How do I run a valid emission test? (a) Applicability. This subpart is addressed to you... your production engines will be equipped with a vapor line that routes running loss vapors into...

  7. Testing ATLAS Z+MET excess with LHC run 2

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Xiaochuan [California Univ., Davis, CA (United States). Dept. of Physics; Shirai, Satoshi [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Terada, Takahiro [Tokyo Univ. (Japan). Dept. of Physics; Asia Pacific Center for Theoretical Physics (APCTP), Pohang (Korea, Republic of)

    2016-05-15

    The ATLAS collaboration reported a 3σ excess in the search of events containing on-Z dilepton, jets, and large missing momentum (MET) in the 8 TeV LHC run. Motivated by this excess, many models of new physics have been proposed. Recently, the ATLAS and CMS collaborations reported new results for similar Z+MET channels in the 13 TeV run. In this paper, we comprehensively discuss the consistency between the proposed models and the LHC results of Run 1 and Run 2. We find that in models with heavy gluino production, there is generically some tension between the 8 TeV and 13 TeV results. On the other hand, models with light squark production provide relatively better fitting to both results.

  8. AGR-2 IRRADIATION TEST FINAL AS-RUN REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Blaise, Collin

    2014-07-01

    This document presents the as-run analysis of the AGR-2 irradiation experiment. AGR-2 is the second of the planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the U.S. Department of Energy as part of the Very High Temperature Reactor (VHTR) Technical Development Office (TDO) program. The objectives of the AGR-2 experiment are to: (a) Irradiate UCO (uranium oxycarbide) and UO2 (uranium dioxide) fuel produced in a large coater. Fuel attributes are based on results obtained from the AGR-1 test and other project activities. (b) Provide irradiated fuel samples for post-irradiation experiment (PIE) and safety testing. (c) Support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. The primary objective of the test was to irradiate both UCO and UO2 TRISO (tri-structural isotropic) fuel produced from prototypic scale equipment to obtain normal operation and accident condition fuel performance data. The UCO compacts were subjected to a range of burnups and temperatures typical of anticipated prismatic reactor service conditions in three capsules. The test train also includes compacts containing UO2 particles produced independently by the United States, South Africa, and France in three separate capsules. The range of burnups and temperatures in these capsules were typical of anticipated pebble bed reactor service conditions. The results discussed in this report pertain only to U.S. produced fuel. In order to achieve the test objectives, the AGR-2 experiment was irradiated in the B-12 position of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) for a total irradiation duration of 559.2 effective full power days (EFPD). Irradiation began on June 22, 2010, and ended on October 16, 2013, spanning 12 ATR power cycles and approximately three and a half calendar years. The test

  9. AGR-1 Irradiation Test Final As-Run Report

    Energy Technology Data Exchange (ETDEWEB)

    Blaise P. Collin

    2012-06-01

    This document presents the as-run analysis of the AGR-1 irradiation experiment. AGR-1 is the first of eight planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the US Department of Energy (DOE) as part of the Next-Generation Nuclear Plant (NGNP) project. The objectives of the AGR-1 experiment are: 1. To gain experience with multi-capsule test train design, fabrication, and operation with the intent to reduce the probability of capsule or test train failure in subsequent irradiation tests. 2. To irradiate fuel produced in conjunction with the AGR fuel process development effort. 3. To provide data that will support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. In order to achieve the test objectives, the AGR-1 experiment was irradiated in the B-10 position of the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) for a total duration of 620 effective full power days of irradiation. Irradiation began on December 24, 2006 and ended on November 6, 2009 spanning 13 ATR cycles and approximately three calendar years. The test contained six independently controlled and monitored capsules. Each capsule contained 12 compacts of a single type, or variant, of the AGR coated fuel. No fuel particles failed during the AGR-1 irradiation. Final burnup values on a per compact basis ranged from 11.5 to 19.6 %FIMA, while fast fluence values ranged from 2.21 to 4.39 ?1025 n/m2 (E >0.18 MeV). We’ll say something here about temperatures once thermal recalc is done. Thermocouples performed well, failing at a lower rate than expected. At the end of the irradiation, nine of the originally-planned 19 TCs were considered functional. Fission product release-to-birth (R/B) ratios were quite low. In most capsules, R/B values at the end of the irradiation were at or below 10-7 with only one

  10. Preliminary Optimization for Spring-Run Chinook Salmon Environmental Flows in Lassen Foothill Watersheds

    Science.gov (United States)

    Ta, J.; Kelsey, R.; Howard, J.; Hall, M.; Lund, J. R.; Viers, J. H.

    2014-12-01

    Stream flow controls physical and ecological processes in rivers that support freshwater ecosystems and biodiversity vital for services that humans depend on. This master variable has been impaired by human activities like dam operations, water diversions, and flood control infrastructure. Furthermore, increasing water scarcity due to rising water demands and droughts has further stressed these systems, calling for the need to find better ways to identify and allocate environmental flows. In this study, a linear optimization model was developed for environmental flows in river systems that have minimal or no regulation from dam operations, but still exhibit altered flow regimes due to surface water diversions and groundwater abstraction. Flow regime requirements for California Central Valley spring-run Chinook salmon (Oncorhynchus tshawytscha) life history were used as a test case to examine how alterations to the timing and magnitude of water diversions meet environmental flow objectives while minimizing impact to local water supply. The model was then applied to Mill Creek, a tributary of the Sacramento River, in northern California, and its altered flow regime that currently impacts adult spring-run Chinook spawning and migration. The resulting optimized water diversion schedule can be used to inform water management decisions that aim to maximize benefit for the environment while meeting local water demands.

  11. Preliminary test results for the SVX4

    Energy Technology Data Exchange (ETDEWEB)

    Christofek, L.; Hanagaki, K.; Rapidis, P.; Utes, M.; /Fermilab

    2005-06-01

    We present and summarize the preliminary test results for SVX4 chip testing. There are presently two versions of the SVX4. Version 2 has on-chip bypassing and Version 1 does not. The on-chip bypassing is a layer of transistors under the front-end analog pipeline that acts as a bypassing capacitor for the voltage supply. Its size is about a microfarad. We aggressively choose to test Version 2 because of this feature. The feature is advantageous for hybrid design because it eliminates the need for an additional passive component on the hybrid itself by placing it on the actual SVX4 die. Also, the SVX4 was designed to operate in two modes: D. and CDF. One can set which mode the chip will operate by placing a jumper in the proper position on the SVX4 chip carrier. In either mode, the chip can either use the operating parameters from the shift register or the shadow register. Similarly, this is selected by placing a jumper on the SVX4 chip carrier. This chip has this feature because it was unknown whether the new design of the shadow register would be operable. The shadow register is also call the SEU register or Single Event Upset register. An introduction into the functionality of the chip and an explanation on the difference between D. and CDF mode can be found in the SVX4 User's Manual [1].

  12. 77 FR 62396 - Annual Company-Run Stress Test Requirements for Banking Organizations With Total Consolidated...

    Science.gov (United States)

    2012-10-12

    .... 1438] RIN 7100-AD-86 Annual Company-Run Stress Test Requirements for Banking Organizations With Total... federal financial regulatory agency to conduct stress tests on an annual basis. The Board is adopting this final rule to implement the company-run stress test requirements in the Dodd-Frank Act regarding...

  13. 40 CFR 86.137-96 - Dynamometer test run, gaseous and particulate emissions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Dynamometer test run, gaseous and particulate emissions. 86.137-96 Section 86.137-96 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures § 86.137-96 Dynamometer test run,...

  14. 40 CFR 1042.501 - How do I run a valid emission test?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I run a valid emission test? 1042.501 Section 1042.501 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Test Procedures § 1042.501 How do I run a valid emission test? (a) Use the equipment and procedures...

  15. 9 CFR 54.11 - Approval of laboratories to run official scrapie tests and official genotype tests.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Approval of laboratories to run official scrapie tests and official genotype tests. 54.11 Section 54.11 Animals and Animal Products ANIMAL... laboratories to run official scrapie tests and official genotype tests. (a) State, Federal, and...

  16. Can we test Dark Energy with Running Fundamental Constants ?

    CERN Document Server

    Doran, M

    2004-01-01

    We investigate a link between the running of the fine structure constant $\\alpha$ and a time evolving scalar dark energy field. Employing a versatile parameterization for the equation of state, we exhaustively cover the space of dark energy models. Under the assumption that the change in $\\alpha$ is to first order given by the evolution of the Quintessence field, we show that current Oklo, Quasi Stellar Objects and Equivalence Principle observations restrict the model parameters considerably stronger than observations of the Cosmic Microwave Background, Large Scale Structure and Supernovae Ia combined.

  17. Can we test dark energy with running fundamental constants?

    Science.gov (United States)

    Doran, Michael

    2005-04-01

    We investigate a link between the running of the fine structure constant α and a time evolving scalar dark energy field. Employing a versatile parametrization for the equation of state, we exhaustively cover the space of dark energy models. Under the assumption that the change in α is to first order given by the evolution of the quintessence field, we show that current Oklo, quasi-stellar object and equivalence principle observations restrict the model parameters considerably more strongly than observations of the cosmic microwave background, large scale structure and supernovae Ia combined.

  18. A PILOT STUDY COMPARING TWO FIELD TESTS WITH THE TREADMILL RUN TEST IN SOCCER PLAYERS

    Directory of Open Access Journals (Sweden)

    Abdul Rashid Aziz

    2005-06-01

    Full Text Available This study compares the performances obtained during soccer-specific field tests of the 20 m multistage shuttle run test (MST and the Yo-Yo intermittent endurance test (YIET, with the measured maximal oxygen uptake (VO2max obtained in both field tests as well as that obtained in the traditional test of running to exhaustion on a treadmill (TRT, in young trained soccer players. Twenty-one National-level youth players performed, in random order, the MST and YIET to determine the relationship between the two field tests. From these, eight randomly chosen players performed their field tests as well as a TRT, equipped with an ambulatory gas exchange measurement device. Pearson correlation coefficient analysis showed that the players' performance (i.e. distance covered in the MST and YIET was correlated (r = 0.65, p 0.05. In contrast, significant correlations were observed between the players' performance in the MST with the measured VO2max obtained in the same MST and in the YIET (both p < 0.05; and attained almost statistical significance with the measured VO2max in the TRT (p = 0.06. The lack of association between distances covered in the YIET with all the measured VO2max values suggest that measured VO2max per se may not be suitable to characterize soccer players' intermittent endurance performance. In comparison with the MST, the YIET may be a more favourable field-based assessment of soccer player's endurance performance

  19. LHC Report: Tests of new LHC running modes

    CERN Multimedia

    Verena Kain for the LHC team

    2012-01-01

    On 13 September, the LHC collided lead ions with protons for the first time. This outstanding achievement was key preparation for the planned 2013 operation in this mode. Outside of two special physics runs, the LHC has continued productive proton-proton luminosity operation.   Celebrating proton-ion collisions. The first week of September added another 1 fb-1 of integrated luminosity to ATLAS’s and CMS’s proton-proton data set. It was a week of good and steady production mixed with the usual collection of minor equipment faults. The peak performance was slightly degraded at the start of the week but thanks to the work of the teams in the LHC injectors the beam brightness – and thus the LHC peak performance – were restored to previous levels by the weekend. The LHC then switched to new running modes and spectacularly proved its potential as a multi-purpose machine. This is due in large part to the LHC equipment and controls, which have been designed wi...

  20. Adaptive testing for psychological assessment: how many items are enough to run an adaptive testing algorithm?

    Science.gov (United States)

    Wagner-Menghin, Michaela M; Masters, Geoff N

    2013-01-01

    Although the principles of adaptive testing were established in the psychometric literature many years ago (e.g., Weiss, 1977), and practice of adaptive testing is established in educational assessment, it not yet widespread in psychological assessment. One obstacle to adaptive psychological testing is a lack of clarity about the necessary number of items to run an adaptive algorithm. The study explores the relationship between item bank size, test length and measurement precision. Simulated adaptive test runs (allowing a maximum of 30 items per person) out of an item bank with 10 items per ability level (covering .5 logits, 150 items total) yield a standard error of measurement (SEM) of .47 (.39) after an average of 20 (29) items for 85-93% (64-82%) of the simulated rectangular sample. Expanding the bank to 20 items per level (300 items total) did not improve the algorithm's performance significantly. With a small item bank (5 items per ability level, 75 items total) it is possible to reach the same SEM as with a conventional test, but with fewer items or a better SEM with the same number of items.

  1. 40 CFR 1039.501 - How do I run a valid emission test?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false How do I run a valid emission test? 1039.501 Section 1039.501 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Procedures § 1039.501 How do I run a valid emission test? (a) Use the equipment and procedures...

  2. 40 CFR 86.341-79 - Diesel engine dynamometer test run.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Diesel engine dynamometer test run. 86.341-79 Section 86.341-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR....341-79 Diesel engine dynamometer test run. (a) This section applies to Diesel engines only....

  3. Testing LHT at the LHC Run-II

    CERN Document Server

    Cao, Qing-Hong; Liu, Yandong

    2016-01-01

    We study the Littlest Higgs model with T-parity (LHT) in the process of $pp \\to W_H^+W_H^- \\to W^+W^- A_H A_H$ at the 14 TeV LHC. With the $W$-jet tagging technique, we demonstrate that the bulk of the model parameter space can be probed at the level of more than $5\\sigma$ in the signature of two fat $W$-jets plus large missing energy. Furthermore, we propose a novel strategy of measuring the principle parameter $f$ that is crucial to testify the LHT model and to fix mass spectrum, including dark matter particle. Our proposal can be easily incorporated into current experimental program of diboson searches at the LHC Run-II.

  4. RUNS TEST FOR A CIRCULAR DISTRIBUTION AND A TABLE OF PROBABILITIES

    Science.gov (United States)

    of the well-known Wald - Wolfowitz runs test for a distribution on a straight line. The primary advantage of the proposed test is that it minimizes the number of assumptions on the theoretical distribution.

  5. Preliminary results of steel containment vessel model test

    Energy Technology Data Exchange (ETDEWEB)

    Luk, V.K.; Hessheimer, M.F. [Sandia National Labs., Albuquerque, NM (United States); Matsumoto, T.; Komine, K.; Arai, S. [Nuclear Power Engineering Corp., Tokyo (Japan); Costello, J.F. [Nuclear Regulatory Commission, Washington, DC (United States)

    1998-04-01

    A high pressure test of a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of a steel containment vessel (SCV), representing an improved boiling water reactor (BWR) Mark II containment, was conducted on December 11--12, 1996 at Sandia National Laboratories. This paper describes the preliminary results of the high pressure test. In addition, the preliminary post-test measurement data and the preliminary comparison of test data with pretest analysis predictions are also presented.

  6. 40 CFR 89.407 - Engine dynamometer test run.

    Science.gov (United States)

    2010-07-01

    ... permitted to precondition the engine at rated speed and maximum horsepower until the oil and water... is void and may be aborted. The test mode may be restarted by preconditioning with the previous mode... pretest value, the test segment is void. ...

  7. Effect of adaptive paced cardiolocomotor synchronization during running: a preliminary study.

    Science.gov (United States)

    Phillips, Bill; Jin, Yi

    2013-01-01

    Cardiolocomotor synchronization (CLS) has been well established for individuals engaged in rhythmic activity, such as walking, running, or cycling. When frequency of the activity is at or near the heart rate, entrainment occurs. CLS has been shown in many cases to improve the efficiency of locomotor activity, improving stroke volume, reducing blood pressure variability, and lowering the oxygen uptake (VO2). Instead of a 1:1 frequency ratio of activity to heart rate, an investigation was performed to determine if different harmonic coupling at other simple integer ratios (e.g. 1:2, 2:3, 3:2) could achieve any performance benefits. CLS was ensured by pacing the stride rate according to the measured heartbeat (i.e., adaptive paced CLS, or forced CLS). An algorithm was designed that determined the simplest ratio (lowest denominator) that, when multiplied by the heart rate will fall within an individualized, predetermined comfortable pacing range for the user. The algorithm was implemented on an iPhone 4, which generated a 'tick-tock' sound through the iPhone's headphones. A sham-controlled crossover study was performed with 15 volunteers of various fitness levels. Subjects ran a 3 mile (4.83 km) simulated training run at their normal pace on two consecutive days (randomized one adaptive pacing, one sham). Adaptive pacing resulted in faster runs run times, with subjects running an average of 26:03 ± 3:23 for adaptive pacing and 26:38 ± 3:31 for sham (F = 5.46, p increase in heart rate from the start of the race as estimated by an exponential time constant was significantly longer during adaptive pacing, τ = 0.99 ± 0.30, compared to sham, τ = 1.53 ± 0.34 (t = -6.62, p running performance and may be useful as a training aid. Key PointsSham-controlled crossover study using 15 experienced runners running 3 miles (4.83 km).Adaptive CLS pacing resulted in statistically significant 35 second average decrease in run-time (p Increase in heart rate during the run was

  8. Testing for Long-Run Relation between Economic Growth and ...

    African Journals Online (AJOL)

    Michael O. Mensah

    2016-06-01

    Jun 1, 2016 ... cointegration test based on Johansen's procedure indicate the existence of a cointegration between export earnings of ..... going by the result of the Trace statistic, the null ..... Shumway R. H. and Stoffer D. S. (2010), Time.

  9. Comparison of Sprint and Run Times with Performance on the Wingate Anaerobic Test.

    Science.gov (United States)

    Tharp, Gerald D.; And Others

    1985-01-01

    Male volunteers were studied to examine the relationship between the Wingate Anaerobic Test (WAnT) and sprint-run times and to determine the influence of age and weight. Results indicate the WAnT is a moderate predictor of dash and run times but becomes a stronger predictor when adjusted for body weight. (Author/MT)

  10. The relationship between the interval shuttle run test and maximal oxygen uptake in soccer players

    NARCIS (Netherlands)

    Lemmink, KAPM; Visscher, C

    2003-01-01

    The aim of this study was to determine the relationship between the interval shuttle run test (ISRT) and maximal oxygen uptake (VO2max) in soccer players. The ISRT was developed to measure interval endurance capacity. During the ISRT, subjects alternately run for 30 sec and walk for 15 sec with

  11. 40 CFR 91.409 - Engine dynamometer test run.

    Science.gov (United States)

    2010-07-01

    ... water temperatures are stabilized. The temperatures are defined as stabilized if they are maintained... another mode, the test is void and must be restarted as described at paragraph (b)(1) of this section. (11... period for each mode. If this requirement is not met, the mode is void and must be restarted. (12) If at...

  12. Simulated tsunami run-up amplification factors around Penang Island for preliminary risk assessment

    Science.gov (United States)

    Lim, Yong Hui; Kh'ng, Xin Yi; Teh, Su Yean; Koh, Hock Lye; Tan, Wai Kiat

    2017-08-01

    The mega-tsunami Andaman that struck Malaysia on 26 December 2004 affected 200 kilometers of northwest Peninsular Malaysia coastline from Perlis to Selangor. It is anticipated by the tsunami scientific community that the next mega-tsunami is due to occur any time soon. This rare catastrophic event has awakened the attention of Malaysian government to take appropriate risk reduction measures, including timely and orderly evacuation. To effectively evacuate ordinary citizens to a safe ground or a nearest designated emergency shelter, a well prepared evacuation route is essential with the estimated tsunami run-up heights and inundation distances on land clearly indicated on the evacuation map. The run-up heights and inundation distances are simulated by an in-house model 2-D TUNA-RP based upon credible scientific tsunami source scenarios derived from tectonic activity around the region. To provide a useful tool for estimating the run-up heights along the entire coast of Penang Island, we computed tsunami amplification factors based upon 2-D TUNA-RP model simulations in this paper. The inundation map and run-up amplification factors in six domains along the entire coastline of Penang Island are provided. The comparison between measured tsunami wave heights for the 2004 Andaman tsunami and TUNA-RP model simulated values demonstrates good agreement.

  13. Test runs of a Belle II PXD prototype readout system

    Energy Technology Data Exchange (ETDEWEB)

    Getzkow, Dennis; Kuehn, Wolfgang; Lange, Soeren; Lautenbach, Klemens [Justus-Liebig-Universitaet Giessen, II. Physikalisches Institut (Germany); Gessler, Thomas [KEK, Tsukuba (Japan); Collaboration: Belle II-Collaboration

    2016-07-01

    The Belle II PXD readout system (called ONSEN for Online Selection Nodes) uses ATCA (Advanced Telecommunications Architecture) boards with Xilinx Virtex-5 FX70T FPGAs and high speed optical links (6.5 Gbit/s each). The full system consists of 9 carrier boards and 33 daughter cards. The ONSEN system has several interfaces: (a) it receives PXD data from the DHH (Data Handling Hybrid) system, (b) it receives ROI (Regions-of-Interest) data for online data reduction from the HLT (High Level Trigger) system by GbE, and (c) it features data ports to two event builders: EVB1 combines data from all detectors except PXD (in order to generate the ROIs) and EVB2 combines the reduced PXD data with all other data. One of the critical issues is the matching of trigger numbers in the data (received by DHH from the timing distribution system) and trigger numbers in the ROIs (received by the HLT). In order to test the interfaces, in particular for a high HLT rate up to 30 kHz, a prototype system with 3 daughter cards was installed at KEK and tested with DHH, HLT and EVB2. Test results are presented.

  14. Yo-Yo IR1 vs. incremental continuous running test for prediction of 3000-m performance.

    Science.gov (United States)

    Schmitz, Boris; Klose, Andreas; Schelleckes, Katrin; Jekat, Charlotte M; Krüger, Michael; Brand, Stefan-Martin

    2017-11-01

    This study aimed to compare physiological responses during the Yo-Yo intermittent recovery level 1 (Yo-Yo IR1) Test and an incremental continuous running field Test (ICRT) and to analyze their predictive value on 3000-m running performance. Forty moderately trained individuals (18 females) performed the ICRT and Yo-Yo IR1 Test to exhaustion. The ICRT was performed as graded running test with an increase of 2.0 km·h-1 after each 3 min interval for lactate diagnostic. In both tests, blood lactate levels were determined after the test and at 2 and 5 min of recovery. Heart rate (HR) was recorded to monitor differences in HR slopes and HR recovery. Comparison revealed a correlation between ICRT and Yo-Yo IR1 Test performance (R2=0.83, Prunning time (R2=0.77, Prunning performances such as 3000-m runs but maximum HR and blood lactate values differ significantly. The ICRT may have higher predictive power for middle- to long- distance running performance such as 3000-m runs offering a reliable test for coaches in the recruitment of athletes or supervision of training concepts.

  15. Reliability and validity of a novel intermittent peak running speed test for Australian football.

    Science.gov (United States)

    Mooney, Mitchell G; Hunter, Jayden R; O'Brien, Brendan J; Berry, Jason T; Young, Warren B

    2011-04-01

    Australian football requires frequent intermittent sprinting close to peak running speed. However, tests assessing the capability to maintain intermittent peak running speed are not reported in scientific literature. Therefore, our objective is to report the reliability and validity of a novel intermittent peak running speed test. The intermittent peak running speed test required footballers to perform 10 repetitions on 25-second intervals. Each repetition required 15-m jogging, 20-m acceleration to peak speed, 10 m to sustain peak speed, 20-m deceleration, and finally a 15-m jog. Intermittent peak running speed was determined by portable global positioning system. To assess reliability, 26 footballers performed the intermittent peak running speed test on 2 occasions 3-5 days apart. Our results revealed that average peak speed had a coefficient of variation of 2.2% and an intraclass correlation of 0.91. To assess construct validity, average peak speed was compared between elite, sub-elite, and regional footballers. The average peak speed of the elite footballers (28.6 ± 1.7 km · h(-1)) was higher than that of the sub-elite (27.4 ± 1.7 km · h(-1)) and regional (27 ± 1.9 km · h(-1)) competitors (p intermittent peak running speed test possesses acceptable reliability and distinguishes between elite and sub-elite footballers.

  16. EFFECT OF ADAPTIVE PACED CARDIOLOCOMOTOR SYNCHRONIZATION DURING RUNNING: A PRELIMINARY STUDY

    Directory of Open Access Journals (Sweden)

    Bill Phillips

    2013-09-01

    Full Text Available Cardiolocomotor synchronization (CLS has been well established for individuals engaged in rhythmic activity, such as walking, running, or cycling. When frequency of the activity is at or near the heart rate, entrainment occurs. CLS has been shown in many cases to improve the efficiency of locomotor activity, improving stroke volume, reducing blood pressure variability, and lowering the oxygen uptake (VO2. Instead of a 1:1 frequency ratio of activity to heart rate, an investigation was performed to determine if different harmonic coupling at other simple integer ratios (e.g. 1:2, 2:3, 3:2 could achieve any performance benefits. CLS was ensured by pacing the stride rate according to the measured heartbeat (i.e., adaptive paced CLS, or forced CLS. An algorithm was designed that determined the simplest ratio (lowest denominator that, when multiplied by the heart rate will fall within an individualized, predetermined comfortable pacing range for the user. The algorithm was implemented on an iPhone 4, which generated a 'tick-tock' sound through the iPhone's headphones. A sham-controlled crossover study was performed with 15 volunteers of various fitness levels. Subjects ran a 3 mile (4.83 km simulated training run at their normal pace on two consecutive days (randomized one adaptive pacing, one sham. Adaptive pacing resulted in faster runs run times, with subjects running an average of 26:03 ± 3:23 for adaptive pacing and 26:38 ± 3:31 for sham (F = 5.46, p < 0.05. The increase in heart rate from the start of the race as estimated by an exponential time constant was significantly longer during adaptive pacing, τ = 0.99 ± 0.30, compared to sham, τ = 1.53 ± 0.34 (t = -6.62, p < 0.01. Eighty-seven percent of runners found it easy to adjust their stride length to match the pacing signal with seventy-nine percent reporting that pacing helped their performance. These results suggest that adaptive paced CLS may have a beneficial effect on running

  17. AGR 3/4 Irradiation Test Final As Run Report

    Energy Technology Data Exchange (ETDEWEB)

    Collin, Blaise P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    Several fuel and material irradiation experiments have been planned for the Idaho National Laboratory Advanced Reactor Technologies Technology Development Office Advanced Gas Reactor Fuel Development and Qualification Program (referred to as the INL ART TDO/AGR fuel program hereafter), which supports the development and qualification of tristructural-isotropic (TRISO) coated particle fuel for use in HTGRs. The goals of these experiments are to provide irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, support development and validation of fuel performance and fission product transport models and codes, and provide irradiated fuel and materials for post irradiation examination and safety testing (INL 05/2015). AGR-3/4 combined the third and fourth in this series of planned experiments to test TRISO coated low enriched uranium (LEU) oxycarbide fuel. This combined experiment was intended to support the refinement of fission product transport models and to assess the effects of sweep gas impurities on fuel performance and fission product transport by irradiating designed-to-fail fuel particles and by measuring subsequent fission metal transport in fuel-compact matrix material and fuel-element graphite. The AGR 3/4 fuel test was successful in irradiating the fuel compacts to the burnup and fast fluence target ranges, considering the experiment was terminated short of its initial 400 EFPD target (Collin 2015). Out of the 48 AGR-3/4 compacts, 42 achieved the specified burnup of at least 6% fissions per initial heavy-metal atom (FIMA). Three capsules had a maximum fuel compact average burnup < 10% FIMA, one more than originally specified, and the maximum fuel compact average burnup was <19% FIMA for the remaining capsules, as specified. Fast neutron fluence fell in the expected range of 1.0 to 5.5×1025 n/m2 (E >0.18 MeV) for all compacts. In addition, the AGR-3/4 experiment was globally successful in keeping the

  18. System and Component Software Specification, Run-time Verification and Automatic Test Generation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The following background technology is described in Part 5: Run-time Verification (RV), White Box Automatic Test Generation (WBATG). Part 5 also describes how WBATG...

  19. MEASUREMENT OF AERODYNAMIC CHARACTERISTICS OF A HANG-GLIDER-WING BY GROUND RUN TESTS USING A TEST VEHICLE

    OpenAIRE

    Hozumi, Koki; KOMODA, Masaki; Ono, Takatsugu; TSUKANO, Yukichi; 穂積, 弘毅; 古茂田, 真幸; 小野, 孝次; 塚野, 雄吉

    1987-01-01

    In order to investigate longitudinal force and moment characteristics of a hang-glider-wing, ground run tests were conducted using a test vehicle. A hang-glider-wing was installed on a test vehicle using a six-components-balance for wind tunnel use. Aerodynamic force and moment were measrued during the vehicle run at various constant speeds. Geometrical twist distribution along the wing span was recorded as well. Measured force and moment data were corrected for possible ground effect and upw...

  20. PEP Run Report for Simulant Shakedown/Functional Testing

    Energy Technology Data Exchange (ETDEWEB)

    Josephson, Gary B.; Geeting, John GH; Bredt, Ofelia P.; Burns, Carolyn A.; Golovich, Elizabeth C.; Guzman-Leong, Consuelo E.; Kurath, Dean E.; Sevigny, Gary J.

    2009-12-29

    Pacific Northwest National Laboratory (PNNL) has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Waste Treatment Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed, and operated as part of a plan to respond to issue M12, "Undemonstrated Leaching Processes." The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. The PEP also includes non-prototypic ancillary equipment to support the core processing. Two operating scenarios are currently being evaluated for the ultrafiltration process (UFP) and leaching operations. The first scenario has caustic leaching performed in the UFP-2 ultrafiltration feed vessels (i.e., vessel UFP-VSL-T02A in the PEP; and vessels UFP-VSL-00002A and B in the WTP PTF). The second scenario has caustic leaching conducted in the UFP-1 ultrafiltration feed preparation vessels (i.e., vessels UFP-VSL-T01A and B in the PEP; vessels UFP-VSL-00001A and B in the WTP PTF). In both scenarios, 19-M sodium hydroxide solution (NaOH, caustic) is added to the waste slurry in the vessels to leach solid aluminum compounds (e.g., gibbsite, boehmite). Caustic addition is followed by a heating step that uses direct injection of steam to accelerate the leach process. Following the caustic leach, the vessel contents are cooled using vessel cooling jackets and/or external heat exchangers. The main difference between the two scenarios is that for leaching in UFP-1, the 19-M NaOH is added to un-concentrated waste slurry (3-8 wt% solids), while for leaching in UFP-2, the slurry is concentrated to nominally 20 wt% solids using cross-flow ultrafiltration

  1. Preliminary performance studies for the ATLAS Muon Trigger during initial Run 2

    CERN Document Server

    Reale, Marilea; The ATLAS collaboration

    2015-01-01

    The physics program of the ATLAS experiment at CERN's Large Hadron Collider (LHC) includes the search for the Higgs Boson and the measurements of its properties, searches for new physics and precision measurements of the Standard Model. Events with high momentum muons in the final state are an important signature of many of these physics topics, then an efficient muon trigger and a deep understanding of its performance are crucial. During Run 1 the ATLAS muon trigger was successfully adapted to the challenging environment, thus reaching an excellent performance. During Run 2 ~100 pb-1 of data with 50 ns bunch spacing have been already collected, while the collection of data with 25 ns bunch spacing is currently ongoing. As the data taking proceeds, the muon trigger performance is being constantly monitored. The muon trigger efficiency, studied both with respect to offline muon reconstruction and with Tag&Probe method applied to the Z decays in muon pairs, is presented here as a function of different kinem...

  2. 78 FR 67218 - Agency Information Collection Activities: Company-Run Annual Stress Test Reporting Template and...

    Science.gov (United States)

    2013-11-08

    ... Stress Test Reporting Template and Documentation for Covered Institutions With Total Consolidated Assets... requirement for national banks and Federal savings associations titled, ``Company-Run Annual Stress Test....gov/tools-forms/forms/bank-operations/stress-test-reporting.html ). SUPPLEMENTARY INFORMATION: The...

  3. As-Run Physics Analysis for the UCSB-1 Experiment in the Advanced Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Joseph Wayne [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    The University of California Santa Barbara (UCSB) -1 experiment was irradiated in the A-10 position of the ATR. The experiment was irradiated during cycles 145A, 145B, 146A, and 146B. Capsule 6A was removed from the test train following Cycle 145A and replaced with Capsule 6B. This report documents the as-run physics analysis in support of Post-Irradiation Examination (PIE) of the test. This report documents the as-run fluence and displacements per atom (DPA) for each capsule of the experiment based on as-run operating history of the ATR. Average as-run heating rates for each capsule are also presented in this report to support the thermal analysis.

  4. Test report for run-in acceptance testing of hydrogen mitigation retrieval Pump-3

    Energy Technology Data Exchange (ETDEWEB)

    Berglin, B.G.

    1997-08-15

    This report will provide the findings of the demonstration test conducted on the Double-Shell Tank (DST) 241-SY-101 HMR Pump-3 in accordance with WHC-SDWM-TP-434 ``Test plan for run-in acceptance testing of hydrogen mitigation/retrieval pump-3`` at the 400 Area Maintenance and Storage Facility (MASF) building from 7 June 1996 through 30 July 1996 per work package 4A-96-92/W. The DST 241-SY-101 hydrogen mitigation retrieval Pump-3 is a 200-HP submersible electric driven pump that has been modified for use in the DST 241-SY-101 containing mixed waste located in the 200W area. The pump has a motor driven rotation mechanism that allows the pump column to rotate through 355{degree}. Prior to operation, pre-operational checks were performed which included loop calibration grooming and alignment of instruments, learning how plumb HMR-3 assembly hung in a vertical position and bump test of the motor to determine rotation direction. The pump was tested in the MASF Large Diameter Cleaning Vessel (LDCV) with process water at controlled temperatures and levels. In addition, the water temperature of the cooling water to the motor oil heat exchanger was recorded during testing. A 480-volt source powered a Variable Frequency Drive (VFD). The VFD powered the pump at various frequencies and voltages to control speed and power output of the pump. A second VFD powered the oil cooling pump. A third VFD was not available to operate the rotational drive motor during the 72 hour test, so it was demonstrated as operational before and after the test. A Mini Acquisition and Control System (Mini-DACS) controls pump functions and monitoring of the pump parameters. The Mini-DACS consists of three computers, software and some Programmable Logic Controllers (PLC). Startup and shutdown of either the pump motor or the oil cooling pump can be accomplished by the Mini-DACS. When the pump was in operation, the Mini-DACS monitors automatically collects data electronically. However, some required data

  5. Replication of Non-Trivial Directional Motion in Multi-Scales Observed by the Runs Test

    Science.gov (United States)

    Yura, Yoshihiro; Ohnishi, Takaaki; Yamada, Kenta; Takayasu, Hideki; Takayasu, Misako

    Non-trivial autocorrelation in up-down statistics in financial market price fluctuation is revealed by a multi-scale runs test(Wald-Wolfowitz test). We apply two models, a stochastic price model and dealer model to understand this property. In both approaches we successfully reproduce the non-stationary directional price motions consistent with the runs test by tuning parameters in the models. We find that two types of dealers exist in the markets, a short-time-scale trend-follower and an extended-time-scale contrarian who are active in different time periods.

  6. 40 CFR 86.340-79 - Gasoline-fueled engine dynamometer test run.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Gasoline-fueled engine dynamometer... Emission Regulations for New Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.340-79 Gasoline-fueled engine dynamometer test run. (a) This section applies to...

  7. Testing the Preliminary X-33 Navigation System

    Science.gov (United States)

    Lomas, James J.; Mitchell, Daniel W.; Freestone, Todd M.; Lee, Charles; Lessman, Craig; Foster, Lee D. (Technical Monitor)

    2001-01-01

    The X-33 Reusable Launch Vehicle (RLV) must meet the demanding requirements of landing autonomously on a narrow landing strip following a flight that reaches an altitude of up to 200,000 feet and a speed in excess of Mach 9 with significant in-flight energy bleed-off maneuvers. To execute this flight regimen a highly reliable avionics system has been designed that includes three LN-100G Inertial Navigation System/Global Positioning System (INS/GPS) units as the primary navigation system for the X-33. NASA's Marshall Space Flight Center (MSFC) tested an INS/GPS system in real-time simulations to determine the ability of this navigation suite to meet the in flight and autonomous landing requirements of the X-33 RLV. A total of sixty-one open loop tests were performed to characterize the navigation accuracy of the LN-100G. Twenty-seven closed-loop tests were also performed to evaluate the performance of the X-33 Guidance, Navigation and Control (GN&C) algorithms with the real navigation hardware. These closed-loop tests were also designed to expose any integration or operational issues with the real-time X-33 vehicle simulation. Dynamic road tests of the INS/GPS were conducted by Litton to assess the performance of differential and nondifferential INS/GPS hybrid navigation solutions. The results of the simulations and road testing demonstrate that this novel solution is capable of meeting the demanding requirements of take-off, in-flight navigation, and autonomous landing of the X-33 RLV. This paper describes the test environment developed to stimulate the LN-100G and discusses the results of this test effort. This paper also presents recommendations for a navigation system suitable to an operational RLV system.

  8. Testing for purchasing power parity in the long-run for ASEAN-5

    Science.gov (United States)

    Choji, Niri Martha; Sek, Siok Kun

    2017-04-01

    For more than a decade, there has been a substantial interest in testing for the validity of the purchasing power parity (PPP) hypothesis empirically. This paper performs a test on revealing a long-run relative Purchasing Power Parity for a group of ASEAN-5 countries for the period of 1996-2016 using monthly data. For this purpose, we used the Pedroni co-integration method to test for the long-run hypothesis of purchasing power parity. We first tested for the stationarity of the variables and found that the variables are non-stationary at levels but stationary at first difference. Results of the Pedroni test rejected the null hypothesis of no co-integration meaning that we have enough evidence to support PPP in the long-run for the ASEAN-5 countries over the period of 1996-2016. In other words, the rejection of null hypothesis implies a long-run relation between nominal exchange rates and relative prices.

  9. Preliminary Test for Nonlinear Input Output Relations in SISO Systems

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...

  10. Lactate minimum test during incremental running after a submaximal cycling exercise: a novel test with training applications for triathletes.

    Science.gov (United States)

    Vicente-Campous, D; Barbado, C; Nuñez, M J; Chicharro, J L

    2014-12-01

    The purpose of the present study was to determine whether running speed determined in a lactate minimum test (lactate minimum intensity, LMI) during a treadmill incremental exercise performed just after submaximal cycling corresponds to the speed of a respiratory exchange ratio of 1.00 (RER-1) and, by extension, to the maximal lactate steady state (MLSS) previously obtained in a standard incremental exercise test. Eighteen moderately trained triathletes (15 men, 3 women) underwent two exercise sessions 72 h apart in random order: 1) a standard incremental treadmill test to identify the speed corresponding to RER-1, and 2) a submaximal exercise test on a bicycle-ergometer to obtain the LT (lactate threshold) followed by the incremental portion of the lactate minimum test on the treadmill. No significant differences were detected between running speed and heart rate at RER-1 and LMI (14.44±1.24 vs. 14.11±1.36 km·h-1 and 166.38±9.30 vs. 169.55±8.97 beats·min-1, respectively). Moreover, 95% of the differences between the results of the two incremental tests for running speed and heart rate were within the limits of agreement. These findings suggest the possibility of obtaining a valid physiological profile of a triathlete using a single test to assess the level of training in both cycling and running.

  11. The picture test of separation and individuation - preliminary research

    OpenAIRE

    Gregor Žvelc; Maša Žvelc

    2000-01-01

    Authors introduce a new instrument, which they developed for measuring separation and individuation process and attachment in adolescence and adulthood. The Picture Test of Separation and Individuation (PTSI) is a semi–projective test. It consists of various pictures, which represent relationships with significant others. PTSI is divided into three subtests: Relationship with Mother, Relationship with Father and Attachment. In a preliminary research on a sample of college and university...

  12. Methodological framework for heart rate variability analysis during exercise: application to running and cycling stress testing.

    Science.gov (United States)

    Hernando, David; Hernando, Alberto; Casajús, Jose A; Laguna, Pablo; Garatachea, Nuria; Bailón, Raquel

    2017-09-26

    Standard methodologies of heart rate variability analysis and physiological interpretation as a marker of autonomic nervous system condition have been largely published at rest, but not so much during exercise. A methodological framework for heart rate variability (HRV) analysis during exercise is proposed, which deals with the non-stationary nature of HRV during exercise, includes respiratory information, and identifies and corrects spectral components related to cardiolocomotor coupling (CC). This is applied to 23 male subjects who underwent different tests: maximal and submaximal, running and cycling; where the ECG, respiratory frequency and oxygen consumption were simultaneously recorded. High-frequency (HF) power results largely modified from estimations with the standard fixed band to those obtained with the proposed methodology. For medium and high levels of exercise and recovery, HF power results in a 20 to 40% increase. When cycling, HF power increases around 40% with respect to running, while CC power is around 20% stronger in running.

  13. Definition study for an extended manned test of a regenerative life support system, preliminary test plan

    Science.gov (United States)

    1971-01-01

    A preliminary plan and procedure are presented for conducting an extended manned test program for a regenerative life support system. Emphasis will be placed on elements associated with long-term system operation and long-term uninterrupted crew confinement.

  14. Familiarization, reliability, and comparability of a 40-m maximal shuttle run test.

    Science.gov (United States)

    Glaister, Mark; Hauck, Hanna; Abraham, Corinne S; Merry, Kevin L; Beaver, Dean; Woods, Bernadette; McInnes, Gillian

    2009-01-01

    The aims of this study were to examine familiarization and reliability associated with a 40-m maximal shuttle run test (40-m MST), and to compare performance measures from the test with those of a typical unidirectional multiple sprint running test (UMSRT). 12 men and 4 women completed four trials of the 40-m MST (8 × 40-m; 20 s rest periods) followed by one trial of a UMSRT (12 × 30-m; repeated every 35 s); with seven days between trials. All trials were conducted indoors and performance times were recorded via twin-beam photocells. Significant between-trial differences in mean 40-m MST times were indicative of learning effects between trials 1 and 2. Test-retest reliability across the remaining trials as determined by coefficient of variation (CV) and intraclass correlation coefficient (ICC) revealed: a) very good reliability for measures of fastest and mean shuttle time (CV = 1.1 - 1.3%; ICC = 0.91 - 0.92); b) good reliability for measures of blood lactate (CV = 10.1 - 23.9%; ICC = 0.74 - 0.82) and ratings of perceived exertion (CV = 5.3 - 7.6%; ICC = 0.79 - 0.84); and c) poor reliability for measures of fatigue (CV = 38.7%; ICC = 0.59). Comparisons between performance indices of the 40-m MST and the UMSRT revealed significant correlations between all measures, except pre-test blood lactate concentration (r = 0. 47). Whilst the 40-m MST does not appear to provide more information than can be gleaned from a typical UMSRT, following the completion of a familiarization trial, the 40-m MST provides an alternative and, except for fatigue measures, reliable means of evaluating repeated sprint ability. Key pointsTests of multiple sprint performance are a popular means of evaluating repeated sprint ability.Multiple sprint tests incorporating changes of direction may be more ecologically valid than unidirectional protocols.The 40-m maximal shuttle run test is a reliable way of evaluating repeated sprint ability following the completion of one familiarization trial

  15. The picture test of separation and individuation - preliminary research

    Directory of Open Access Journals (Sweden)

    Gregor Žvelc

    2000-06-01

    Full Text Available Authors introduce a new instrument, which they developed for measuring separation and individuation process and attachment in adolescence and adulthood. The Picture Test of Separation and Individuation (PTSI is a semi–projective test. It consists of various pictures, which represent relationships with significant others. PTSI is divided into three subtests: Relationship with Mother, Relationship with Father and Attachment. In a preliminary research on a sample of college and university students authors studied basic properties of the test. The results of the research indicate that PTSI is consistent with theoretical background, has good sensitivity and is economical. The Picture Test of Separation and Individuation enables quick but complex insight into individual's relationships with significant others as well as into his/her stage of separation and individuation process. Considering satisfying results of pilot study, authors suggest further research for validation of the test.

  16. W-026 integrated engineering cold run operational test report for balance of plant (BOP)

    Energy Technology Data Exchange (ETDEWEB)

    Kersten, J.K.

    1998-02-24

    This Cold Run test is designed to demonstrate the functionality of systems necessary to move waste drums throughout the plant using approved procedures, and the compatibility of these systems to function as an integrated process. This test excludes all internal functions of the gloveboxes. In the interest of efficiency and support of the facility schedule, the initial revision of the test (rev 0) was limited to the following: Receipt and storage of eight overpacked drums, four LLW and four TRU; Receipt, routing, and staging of eleven empty drums to the process area where they will be used later in this test; Receipt, processing, and shipping of two verification drums (Route 9); Receipt, processing, and shipping of two verification drums (Route 1). The above listed operations were tested using the rev 0 test document, through Section 5.4.25. The document was later revised to include movement of all staged drums to and from the LLW and TRU process and RWM gloveboxes. This testing was performed using Sections 5.5 though 5.11 of the rev 1 test document. The primary focus of this test is to prove the functionality of automatic operations for all mechanical and control processes listed. When necessary, the test demonstrates manual mode operations as well. Though the gloveboxes are listed, only waste and empty drum movement to, from, and between the gloveboxes was tested.

  17. A comparison of two different shuttle run tests for the estimation of VO2max.

    Science.gov (United States)

    Naughton, L M; Cooley, D; Kearney, V; Smith, S

    1996-06-01

    The aims of this experiment were twofold. The first was to determine whether there was a significant difference between two types of 20-m shuttle run test used to estimate VO2max, these being the Canadian version (CT) and the European versione (ET). The second aim was to determine which of the two tests best estimated direct VO2 measurement in our laboratory. To accomplish the first aim, 500 schoolchildren aged 12 to 16 years were randomly chosen from schools within Tasmania to undertake the two tests within seven days of each other. On the day of testing the children were assigned to one of the two tests and had no knowledge as to which test was being undertaken. Half of the children underwent the CT test first while the other half undertook the ET test first. Seven days after the first test was completed the appropriate second test was undertaken. The instructions to each child centred around the necessity to complete as many shuttles as possible staying in time with a pre-recorded signal. A relationship between the two sets of shuttle run data indicated that there was a significant correlation between the ET and CT, r = 0.834 (p test revealed that when the estimates of VO2max were compared however, there was a significant difference between the two tests (p VO2max at 34.9 +/- 0.45 ml.kg-1.min-1 whereas the CT estimated VO2max at 43.3 +/- 0.40 ml.kg-1.min-1. When this data was correlated, the co-efficient dropped to r = 0.761 which was still significant (p VO2max test (DM) which was conducted via standard open circuit spirometry using a Quinton Metabolic Cart (QMC). The highest correlation was DM:ET being r = 0.93 whereas DM:CT was r = 0.87, both being significant at p VO2max as 37.6 +/- 0.37 ml.kg-1.min-1 whereas ET underestimated DM and measured VO2max at 34.7 +/- 0.56 ml.kg-1.min-1. The CT (41.9 +/- 0.62 ml.kg-1.min-1) over estimated DM by 11.4% however, the difference here also being significant (p test or the other in the estimation of VO2max as the two

  18. Influence of running stride frequency in heart rate variability analysis during treadmill exercise testing.

    Science.gov (United States)

    Bailón, Raquel; Garatachea, Nuria; de la Iglesia, Ignacio; Casajús, Jose Antonio; Laguna, Pablo

    2013-07-01

    The analysis and interpretation of heart rate variability (HRV) during exercise is challenging not only because of the nonstationary nature of exercise, the time-varying mean heart rate, and the fact that respiratory frequency exceeds 0.4 Hz, but there are also other factors, such as the component centered at the pedaling frequency observed in maximal cycling tests, which may confuse the interpretation of HRV analysis. The objectives of this study are to test the hypothesis that a component centered at the running stride frequency (SF) appears in the HRV of subjects during maximal treadmill exercise testing, and to study its influence in the interpretation of the low-frequency (LF) and high-frequency (HF) components of HRV during exercise. The HRV of 23 subjects during maximal treadmill exercise testing is analyzed. The instantaneous power of different HRV components is computed from the smoothed pseudo-Wigner-Ville distribution of the modulating signal assumed to carry information from the autonomic nervous system, which is estimated based on the time-varying integral pulse frequency modulation model. Besides the LF and HF components, the appearance is revealed of a component centered at the running SF as well as its aliases. The power associated with the SF component and its aliases represents 22±7% (median±median absolute deviation) of the total HRV power in all the subjects. Normalized LF power decreases as the exercise intensity increases, while normalized HF power increases. The power associated with the SF does not change significantly with exercise intensity. Consideration of the running SF component and its aliases is very important in HRV analysis since stride frequency aliases may overlap with LF and HF components.

  19. An alternative approach to the Army Physical Fitness Test two-mile run using critical velocity and isoperformance curves.

    Science.gov (United States)

    Fukuda, David H; Smith, Abbie E; Kendall, Kristina L; Cramer, Joel T; Stout, Jeffrey R

    2012-02-01

    The purpose of this study was to evaluate the use of critical velocity (CV) and isoperformance curves as an alternative to the Army Physical Fitness Test (APFT) two-mile running test. Seventy-eight men and women (mean +/- SE; age: 22.1 +/- 0.34 years; VO2(MAX): 46.1 +/- 0.82 mL/kg/min) volunteered to participate in this study. A VO2(MAX) test and four treadmill running bouts to exhaustion at varying intensities were completed. The relationship between total distance and time-to-exhaustion was tracked for each exhaustive run to determine CV and anaerobic running capacity. A VO2(MAX) prediction equation (Coefficient of determination: 0.805; Standard error of the estimate: 3.2377 mL/kg/min) was developed using these variables. Isoperformance curves were constructed for men and women to correspond with two-mile run times from APFT standards. Individual CV and anaerobic running capacity values were plotted and compared to isoperformance curves for APFT 2-mile run scores. Fifty-four individuals were determined to receive passing scores from this assessment. Physiological profiles identified from this procedure can be used to assess specific aerobic or anaerobic training needs. With the use of time-to-exhaustion as opposed to a time-trial format used in the two-mile run test, pacing strategies may be limited. The combination of variables from the CV test and isoperformance curves provides an alternative to standardized time-trial testing.

  20. Modeling and Testing of EVs - Preliminary Study and Laboratory Development

    DEFF Research Database (Denmark)

    Yang, Guang-Ya; Marra, Francesco; Nielsen, Arne Hejde

    2010-01-01

    impact at different geographical areas, as well as driving and charging patterns. Electric circuit model is deployed in this work to represent the electrical properties of a lithium-ion battery. This paper reports the preliminary modeling and validation work based on manufacturer data sheet and realistic......Electric vehicles (EVs) are expected to play a key role in the future energy management system to stabilize both supply and consumption with the presence of high penetration of renewable generation. A reasonably accurate model of battery is a key element for the study of EVs behavior and the grid...... tests, followed by the suggestions towards a feasible battery model for further studies....

  1. Design and preliminary testing of the RIC hybrid knee prosthesis.

    Science.gov (United States)

    Lenzi, T; Sensinger, J; Lipsey, J; Hargrove, L; Kuiken, T

    2015-08-01

    We present a novel hybrid knee prosthesis that uses a motor, transmission and control system only for active dynamics tasks, while relying on a spring/damper system for passive dynamics activities. Active dynamics tasks require higher torque, lower speed, and occur less frequently than passive dynamic activities. By designing the actuation system around active tasks alone, we achieved a lightweight design (1.7 Kg w/o battery) without sacrificing peak torque (85Nm repetitive). Preliminary tests performed by an able-bodied person using a bypass orthosis show that the hybrid knee can support reciprocal stairs ambulation with low electrical energy consumption.

  2. Preliminary Design of a LSA Aircraft Using Wind Tunnel Tests

    Directory of Open Access Journals (Sweden)

    Norbert ANGI

    2015-12-01

    Full Text Available This paper presents preliminary results concerning the design and aerodynamic calculations of a light sport aircraft (LSA. These were performed for a new lightweight, low cost, low fuel consumption and long-range aircraft. The design process was based on specific software tools as Advanced Aircraft Analysis (AAA, XFlr 5 aerodynamic and dynamic stability analysis, and Catia design, according to CS-LSA requirements. The calculations were accomplished by a series of tests performed in the wind tunnel in order to assess experimentally the aerodynamic characteristics of the airplane.

  3. Preliminary wind tunnel tests on the pedal wind turbine

    Science.gov (United States)

    Vinayagalingam, T.

    1980-06-01

    High solidity-low speed wind turbines are relatively simple to construct and can be used advantageously in many developing countries for such direct applications as water pumping. Established designs in this class, such as the Savonius and the American multiblade rotors, have the disadvantage that their moving surfaces require a rigid construction, thereby rendering large units uneconomical. In this respect, the pedal wind turbine recently reported by the author and which incorporates sail type rotors offers a number of advantages. This note reports preliminary results from a series of wind tunnel tests which were carried out to assess the aerodynamic torque and power characteristics of the turbine.

  4. Determination of maximum aerobic velocity by a five minute test with reference to running world records. A theoretical approach.

    Science.gov (United States)

    Chamoux, A; Berthon, P; Laubignat, J F

    1996-01-01

    Field measurement of the maximal aerobic velocity (MAV) is closely linked to effort-duration then to the used protocol. We construct the relationship between running speed and running-duration logarithm from running world records. It appears a noteworthy point at 4.97 minutes, to be suggested as MAV duration point. By agreement, MAV could be measured on field by a five minute test whatever the sport may be.

  5. Preliminary Feasibility Testing of the BRIC Brine Water Recovery Concept

    Science.gov (United States)

    Callahan, Michael R.; Pensinger, Stuart; Pickering, Karen D.

    2011-01-01

    The Brine Residual In-Containment (BRIC) concept was developed as a new technology to recover water from spacecraft wastewater brines. Such capability is considered critical to closing the water loop and achieving a sustained human presence in space. The intention of the BRIC concept is to increase the robustness and efficiency of the dewatering process by performing drying inside the container used for the final disposal of the residual brine solid. Recent efforts in the development of BRIC have focused on preliminary feasibility testing using a laboratory- assembled pre-prototype unit. Observations of the drying behavior of actual brine solutions processed under BRIC-like conditions has been of particular interest. To date, experiments conducted with three types of analogue spacecraft wastewater brines have confirmed the basic premise behind the proposed application of in-place drying for these solutions. Specifically, the dried residual mass from these solutions have tended to exhibit characteristics of adhesion and flow that are expected to continue to challenge process stream management in spacecraft brine dewatering system designs. Yet, these same characteristics may favor the development of capillary- and surface-tension-based approaches envisioned as part of an ultimate microgravity-compatible BRIC design. In addition, preliminary feasibility testing of the BRIC pre-prototype confirmed that high rates of water recovery, up to 98% of the available brine water, may be possible while still removing the majority of the brine contaminants from the influent brine stream. These and other observations from testing are reported.

  6. Solar Stirling power generation - Systems analysis and preliminary tests

    Science.gov (United States)

    Selcuk, M. K.; Wu, Y.-C.; Moynihan, P. I.; Day, F. D., III

    1977-01-01

    The feasibility of an electric power generation system utilizing a sun-tracking parabolic concentrator and a Stirling engine/linear alternator is being evaluated. Performance predictions and cost analysis of a proposed large distributed system are discussed. Design details and preliminary test results are presented for a 9.5 ft diameter parabolic dish at the Jet Propulsion Laboratory (Caltech) Table Mountain Test Facility. Low temperature calorimetric measurements were conducted to evaluate the concentrator performance, and a helium flow system is being used to test the solar receiver at anticipated working fluid temperatures (up to 650 or 1200 C) to evaluate the receiver thermal performance. The receiver body is designed to adapt to a free-piston Stirling engine which powers a linear alternator assembly for direct electric power generation. During the next phase of the program, experiments with an engine and receiver integrated into the concentrator assembly are planned.

  7. Preliminary study of an immunochromatography test for serological diagnosis of canine brucellosis.

    Science.gov (United States)

    Wanke, M M; Cairó, F; Rossano, M; Laiño, M; Baldi, P C; Monachesi, N E; Comercio, E A; Vivot, M M

    2012-12-01

    The most widely used screening test for the diagnosis of brucellosis in the dog is the rapid slide agglutination test in the presence of 2-mercaptoethanol (2ME-RSAT). The diagnosis is partially confirmed by the agar gel immunodiffusion test (AGID) and definitively confirmed by bacteriological isolation. Some chronic cases not detected by these tests may be detected by ELISA tests. The use of 2ME-RSAT in routine clinical practice requires a microscope and an experienced operator. An immunochromatographic diagnostic test for canine brucellosis (FASTest(®) Brucella c., Megacor, Hörbranz, Austria) has been recently released. In this study, we compared the diagnostic performance of the FASTest with those of 2ME-RSAT, AGID and ELISAs. Sera from 17 healthy dogs used as negative controls yielded negative results by FASTest, indicating a 100% specificity in this sample. Among 27 sera of dogs with acute or subacute brucellosis confirmed by B. canis isolation, all of which were positive by RSAT and ELISAs, the FASTest was positive in 24 cases and AGID in 23. In acute and subacute cases, the sensitivity of FASTest was 89%. Sera from six dogs with bacteriologically confirmed chronic brucellosis, which were positive by ELISAs but negative by 2ME-RSAT, were also tested; 1 was positive by FASTest and 4 were positive by AGID. These preliminary results indicate a good specificity of the FASTest (100% in this sample) but an unacceptable sensitivity as a screening test. In cases with chronic brucellosis, the sensitivity of the FASTest was lower than that of ELISAs but this assay could make a good intermediate test to be run after a positive RSAT and before running an AGID.

  8. On the mechanism of running-in during wear tests of a babbitt B83

    Science.gov (United States)

    Valeeva, A. Kh.; Valeev, I. Sh.; Fazlyakhmetov, R. F.; Pshenichnyuk, A. I.

    2015-05-01

    Based on an analysis of changes in the structure of cast babbitt of grade B83 in the process of wear tests and on a comparison of the wear curves of cast babbitt and electroplated coating of the same phase composition, there is proposed a wear mechanism at the running-in stage of B83, which is reduced to the spalling-off of coarse particles of the intermetallic β phase, pressing-in of the cleaved particles into the soft plastic matrix, and the formation of a fairly homogeneous coating uniformly paved by small, hard particles.

  9. Wind tunnel tests on slow-running vertical-axis wind-rotors

    Science.gov (United States)

    Sivasegaram, S.

    1981-09-01

    This paper summarizes the results of investigations on the Savonius-type, slow-running, vertical-axis wind-rotors as well as on rotor designs on different subclasses under comparable design and test conditions. It is seen that the performance of the conventional Savonius rotor could be considerably improved upon and the best results are achieved by using two-bladed rotors with a more sophisticated sectional profile than in the conventional design. Rotors with several blades, although capable of considerably higher performance than the Savonius rotor, do not appear to be as good as those with two blades and improved sectional geometry.

  10. Large Scale Model Test Investigation on Wave Run-Up in Irregular Waves at Slender Piles

    DEFF Research Database (Denmark)

    Ramirez, Jorge Robert Rodriguez; Frigaard, Peter; Andersen, Thomas Lykke

    2013-01-01

    from high speed video recordings. Based on the measured run-up heights different types of prediction formulae for run-up in irregular waves were evaluated. In conclusion scale effects on run-up levels seems small except for differences in spray. However, run-up of individual waves is difficult...

  11. FAMILIARIZATION, RELIABILITY, AND COMPARABILITY OF A 40-M MAXIMAL SHUTTLE RUN TEST

    Directory of Open Access Journals (Sweden)

    Mark Glaister

    2009-03-01

    Full Text Available The aims of this study were to examine familiarization and reliability associated with a 40-m maximal shuttle run test (40-m MST, and to compare performance measures from the test with those of a typical unidirectional multiple sprint running test (UMSRT. 12 men and 4 women completed four trials of the 40-m MST (8 × 40-m; 20 s rest periods followed by one trial of a UMSRT (12 × 30-m; repeated every 35 s; with seven days between trials. All trials were conducted indoors and performance times were recorded via twin-beam photocells. Significant between-trial differences in mean 40-m MST times were indicative of learning effects between trials 1 and 2. Test-retest reliability across the remaining trials as determined by coefficient of variation (CV and intraclass correlation coefficient (ICC revealed: a very good reliability for measures of fastest and mean shuttle time (CV = 1.1 - 1.3%; ICC = 0.91 - 0.92; b good reliability for measures of blood lactate (CV = 10.1 - 23.9%; ICC = 0.74 - 0.82 and ratings of perceived exertion (CV = 5.3 - 7.6%; ICC = 0.79 - 0.84; and c poor reliability for measures of fatigue (CV = 38.7%; ICC = 0.59. Comparisons between performance indices of the 40-m MST and the UMSRT revealed significant correlations between all measures, except pre-test blood lactate concentration (r = 0. 47. Whilst the 40-m MST does not appear to provide more information than can be gleaned from a typical UMSRT, following the completion of a familiarization trial, the 40-m MST provides an alternative and, except for fatigue measures, reliable means of evaluating repeated sprint ability

  12. Design and preliminary test results of Daya Bay RPC modules*

    Energy Technology Data Exchange (ETDEWEB)

    Hackenburg, R.

    2011-09-01

    Resistive Plate Chamber (RPC) modules will be used as one part of the cosmic muon veto system in the Daya Bay reactor neutrino experiment. A total of 189 RPC modules will cover the three water pools in the experiment. To achieve track reconstruction and high efficiency, each module consists of 4 layers, each of which contains two sizes of bare chambers. The placement of bare chambers is reversed in different layers to reduce the overlapping dead areas. The module efficiency and patch efficiency were studied both in simulation and test of the data analysis. 143 modules have been constructed and tested. The preliminary study shows that the module and patch 3 out of 4 layers efficiency reaches about 98%.

  13. Design and preliminary test results of Daya Bay RPC modules

    Institute of Scientific and Technical Information of China (English)

    XU Ji-Lei; Logan Lebanowski; Cullen Newsom; Lin Shih-Kai; Jonathan Link; MA Lie-Hua; Viktor Pě(c); Vit Vorobel; CHEN Jin; LIU Jin-Chang; ZHOU Yong-Zhao; GUAN Meng-Yun; LIANG Hao; YANG Chang-Gen; WANG Yi-Fang; ZHANG Jia-Wen; LU Chang-Guo; Kirk McDonald; Robert Hackenburg; Kwong Lau

    2011-01-01

    Resistive Plate Chamber(RPC)modules will be used as one part of the cosmic muon veto system in the Days Bay reactor neutrino experiment.A total of 189 RPC modules will cover the three water pools in the experiment.To achieve track reconstruction and high efficiency,each module consists of 4 layers,each of which contains two sizes of bare chambers.The placement of bare chambers is reversed in different layers to reduce the overlapping dead areas.The module efficiency and patch efficiency were studied both in simulation and test of the data analysis.143 modules have been constructed and tested.The preliminary study shows that the module and patch 3 out of 4 layers efficiency reaches about 98%.

  14. Preliminary dimensioning of the IFMIF Tritium Release Test Module

    Energy Technology Data Exchange (ETDEWEB)

    Arbeiter, Frederik, E-mail: frederik.arbeiter@kit.edu; Abou-Sena, Ali; Chen, Yuming; Freund, Jana; Klix, Axel; Kondo, Keitaro; Vladimirov, Pavel

    2013-10-15

    Highlights: • The design of the IFMIF Tritium Release Test Module is explained. • Nuclear responses in the module and specimens are calculated. • Temperature fields during irradiation are calculated by 1D methods. • The tritium budget is calculated by 1D methods. -- Abstract: As part of the ongoing Engineering Validation and Engineering Design Activities for the International Fusion Materials Irradiation Facility (IFMIF), an experimental device suitable for the irradiation and online tritium release measurements of solid breeder ceramics and beryllium is investigated. This experimental device is called the Tritium Release Test Module (TRTM). In the preliminary design phase, the possible thermal conditions, the tritium diffusion budgets, and the mechanical loads have been studied by analytical calculations and numerical codes. The most important results concern the tritium production and nuclear heating induced in the structures, the temperature distribution in the specimen region and the structure, and the diffusion of tritium through the safety barriers.

  15. Thin film fabrication and system integration test run for a microactuator for a tuneable lens

    Science.gov (United States)

    Hoheisel, Dominik; Rissing, Lutz

    2014-03-01

    An electromagnetic microactuator, for controlling of a tuneable lens, with an integrated electrostatic element is fabricated by thin film technology. The actuator consists of two parts: the first part with microcoil and flux guide and the second part with a ring shaped back iron on a polyimide membrane. The back iron is additionally useable as electrode for electrostatic measurement of the air gap and for electrostatic actuation. By attracting the back iron an optical liquid is displaced and forms a liquid lens inside the back iron ring covered by the membrane. For testing the thin film fabrication sequence, up-scaled systems are generated in a test run. To fabricate the flux guide in an easy and quick way, a Ni-Fe foil with a thickness of 50 μm is laminated on the Si-wafer. This foil is also utilized in the following fabrication sequence as seed layer for electroplating. Compared to Ni-Fe structures deposited by electroplating, the foil is featuring better soft magnetic properties. The foil is structured by wet chemical etching and the backside of the wafer is structured by deep reactive ion etching (DRIE). For post fabrication thinning, the polyimide membrane is treated by oxygen plasma etching. To align the back iron to the microcoil and the flux guide, a flip-chip-bonder is used during test run of system integration. To adjust a constant air gap, a water solvable polymer is tested. A two component epoxy and a polyimide based glue are compared for their bonding properties of the actuator parts.

  16. Trial Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D.; Deibert, S.; Wohlgemuth, J.

    2014-06-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires), caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat', 'thermal-cycle', or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial run of the test procedure. The described experiments examine 4 moisture-cured silicones, 4 foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 deg C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden, Miami, and Phoenix for 1 year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  17. Results of Preliminary Tests of PAR Bunch Cleaning

    CERN Document Server

    Yao, Chihyuan; Grelick, Arthur; Lumpkin, Alex H; Sereno, Nicholas S

    2005-01-01

    A particle accumulator ring (PAR) is used at the Advanced Photon Source (APS) to collect multiple linac bunches and compress them into a 0.3-ns (rms) single bunch for booster injection. A 9.77-MHz fundamental rf system and a 117.3-MHz harmonic rf system are employed for initial beam capture and bunch length compression. Satellite bunches with very low charge form due to rf phase drifts or beam loading change. These satellites, when injected into the booster and then into the storage ring (SR), cause bunch impurity at three buckets from the target bucket. Storage ring and booster bunch cleaning was tried but proved to be difficult due to the top-up mode of operation in the storage ring and tune drift in the booster synchrotron. Recently we implemented a PAR bunch-cleaning system with tune-modulated harmonic rf knockout. Preliminary tests gave a measured SR bunch purity of better than 10

  18. Installation of ECR2 at LNS and Preliminary tests

    CERN Document Server

    Gammino, S; Ciavola, G; Castro, M; Chines, F; Marletta, S; Bieth, C; Sortais, P; Kantas, S

    1999-01-01

    The source ECR2 has been built in 1998 by Pantechnik, according to the design suggested by LNS Ion Source Group. This design entails some improvements with respect to a standard CAPRICE-type source: a) the magnetic field (up to 1.6 T axial, 1.1 T radial) allows to operate the source at 14 GHz in High B mode and at 18 GHz; b) two frequency heating can be used; c) an aluminum made plasma chamber is used in place of the stainless steel one. The main features of ECR2 along with a review of the preliminary tests will be outlined. Typical currents for fully stripped nitrogen are about 25 emA; for the heaviest ions, 1 emA of Kr28+ and 10 emA of Ta27+ have been measured. The installation at LNS has been completed recently and the details will be given.

  19. How to finance investment in Bangladesh: Finding long-run factors in a bounds test method

    Directory of Open Access Journals (Sweden)

    Biru Paksha Paula

    2014-06-01

    Full Text Available Investment in Bangladesh has been at almost one-fourth of the country’s output since the early 2000s. Consequently, Bangladesh’s growth has also remained stagnant at around 6 percent since then. The question of how to increase investment in Bangladesh has been of crucial discussion of late. This study examines the long run determinants of investment in Bangladesh by applying the bounds test over 1976-2010. There should not be any policy dilemma about the effect of lending rates, which must be reduced to boost investment and domestic credit should be expanded. Further liberalization in trade and finance is recommended since economic openness and financial deepening show a positive impact on capital formation. The policy prescriptions for Bangladesh are not different from those for other nations that embarked on liberalization to augment investment for accelerating growth.

  20. 78 FR 59791 - Annual Company-Run Stress Tests at Banking Organizations With Total Consolidated Assets of More...

    Science.gov (United States)

    2013-09-30

    ... test by the Federal Reserve and the requirements for semi-annual company run stress tests. See 12 CFR....154 Annual stress test. (a) General requirements--(1) Savings and loan holding companies with average... From the Federal Register Online via the Government Publishing Office FEDERAL RESERVE SYSTEM 12...

  1. Effects of measurement dependence on generalized Clauser-Horne-Shimony-Holt Bell test in the single-run and multiple-run scenarios

    Science.gov (United States)

    Li, Dan-Dan; Zhou, Yu-Qian; Gao, Fei; Li, Xin-Hui; Wen, Qiao-Yan

    2016-07-01

    Bell tests, as primitive tools to detect nonlocality in bipartite systems, rely on an assumption, i.e., measurement independence. Since ensuring measurement independence in a practical Bell test is difficult, it is crucial to explore the effects of relaxing this assumption. Recently, in the simplest Clauser-Horne-Shimony-Holt Bell (CHSH-Bell) test, Koh et al. [Phys. Rev. Lett. 109, 160404 (2012), 10.1103/PhysRevLett.109.160404] built the relation among measurement dependence, guessing probability, and the maximum value of CHSH-Bell correlation function that an adversary (Eve) can fake. As well, Pope et al. [Phys. Rev. A 88, 032110 (2013), 10.1103/PhysRevA.88.032110] and Yuan et al. [Phys. Rev. A. 91, 032111 (2015), 10.1103/PhysRevA.91.032111] settled the same problem in the multiple-run scenario with the general input distribution and the factorizable one, respectively. However, pertinent results in the generalized CHSH-Bell test are still missing. Here, we study this problem and establish the relation among measurement dependence, guessing probability, and the maximum value of the generalized CHSH-Bell correlation function that Eve can fake. Furthermore, we also consider the multiple-run scenario and show the relations in both input distributions. Interestingly, compared with the simplest CHSH-Bell test, we find that it is more difficult for Eve to fake a violation in the generalized CHSH-Bell test in some special cases. We expect that our conclusions will serve as a reference for quantum information processing tasks such as quantum key distribution, randomness expansion, and other tasks in the device-independent framework.

  2. Thick Concrete Specimen Construction, Testing, and Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, Dwight A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hoegh, Kyle [Univ. of Minnesota, Minneapolis, MN (United States); Khazanovich, Lev [Univ. of Minnesota, Minneapolis, MN (United States)

    2015-03-01

    The purpose of the U.S. Department of Energy Office of Nuclear Energy’s Light Water Reactor Sustainability (LWRS) Program is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the operating lifetimes of nuclear power plants (NPPs) beyond 60 years. Since many important safety structures in an NPP are constructed of concrete, inspection techniques must be developed and tested to evaluate the internal condition. In-service containment structures generally do not allow for the destructive measures necessary to validate the accuracy of these inspection techniques. This creates a need for comparative testing of the various nondestructive evaluation (NDE) measurement techniques on concrete specimens with known material properties, voids, internal microstructure flaws, and reinforcement locations. A preliminary report detailed some of the challenges associated with thick reinforced concrete sections and prioritized conceptual designs of specimens that could be fabricated to represent NPP concrete structures for using in NDE evaluation comparisons. This led to the construction of the concrete specimen presented in this report, which has sufficient reinforcement density and cross-sectional size to represent an NPP containment wall. Details on how a suitably thick concrete specimen was constructed are presented, including the construction materials, final nominal design schematic, as well as formwork and rigging required to safely meet the desired dimensions of the concrete structure. The report also details the type and methods of forming the concrete specimen as well as information on how the rebar and simulated defects were embedded. Details on how the resulting specimen was transported, safely anchored, and marked to allow access for systematic comparative NDE testing of defects in a representative NPP containment wall concrete specimen are also given. Data collection using the MIRA Ultrasonic NDE equipment and

  3. A novel mouse running wheel that senses individual limb forces: biomechanical validation and in vivo testing.

    Science.gov (United States)

    Roach, Grahm C; Edke, Mangesh; Griffin, Timothy M

    2012-08-15

    Biomechanical data provide fundamental information about changes in musculoskeletal function during development, adaptation, and disease. To facilitate the study of mouse locomotor biomechanics, we modified a standard mouse running wheel to include a force-sensitive rung capable of measuring the normal and tangential forces applied by individual paws. Force data were collected throughout the night using an automated threshold trigger algorithm that synchronized force data with wheel-angle data and a high-speed infrared video file. During the first night of wheel running, mice reached consistent running speeds within the first 40 force events, indicating a rapid habituation to wheel running, given that mice generated >2,000 force-event files/night. Average running speeds and peak normal and tangential forces were consistent throughout the first four nights of running, indicating that one night of running is sufficient to characterize the locomotor biomechanics of healthy mice. Twelve weeks of wheel running significantly increased spontaneous wheel-running speeds (16 vs. 37 m/min), lowered duty factors (ratio of foot-ground contact time to stride time; 0.71 vs. 0.58), and raised hindlimb peak normal forces (93 vs. 115% body wt) compared with inexperienced mice. Peak normal hindlimb-force magnitudes were the primary force component, which were nearly tenfold greater than peak tangential forces. Peak normal hindlimb forces exceed the vertical forces generated during overground running (50-60% body wt), suggesting that wheel running shifts weight support toward the hindlimbs. This force-instrumented running-wheel system provides a comprehensive, noninvasive screening method for monitoring gait biomechanics in mice during spontaneous locomotion.

  4. [Peritoneal equilibration test: Conventional versus adapted. Preliminary study].

    Science.gov (United States)

    Zaloszyc, Ariane; Schmitt, Claus Peter; Schaefer, Betti; Doutey, Armelle; Terzic, Joëlle; Menouer, Soraya; Higel, Laetitia; Fischbach, Michel

    2017-02-01

    Conventional automated peritoneal dialysis (APD) is prescribed as a repetition of cycles with the same dwell time and the same fill volume. Water and sodium balance remains a common problem among patients on peritoneal dialysis. More recently, adapted automated peritoneal dialysis was described, as a combination of short dwells with a low volume, in order to enhance ultrafiltration, followed by long dwells with a large fill volume to favor solute removal. We performed a preliminary crossover study on 4 patients. The total amount of dialysate was the same, i.e. 2L/m(2) as well as the total duration of the test, i.e. 150 minutes. The conventional test was made with two identical cycles, each cycle had a fill volume of 1L/m(2) and a duration of 75 minutes, while the adapted test was performed with one short cycle, i.e. 30 minutes with a low fill volume, i.e. 0.6L/m(2), followed by a long cycle, i.e. 120 minutes, with a large fill volume, i.e. 1.4L/m(2). Sodium extraction was improved by 29.3mmol/m(2) (169%) in the adapted test in comparison to the conventional test. Ultrafiltration was enhanced by 159mL/m(2) (128%) in the adapted test compared to the conventional one. Glucose absorption was decreased by 35% in the adapted test in comparison to the conventional test and osmotic conductance was also improved. In conclusion, adapted dialysis may allow for a better volume and sodium balance, since we observed an improvement in sodium extraction and ultrafiltration. This pre-study authorizes an improvement of the European Pediatric Study's protocol on Adapted APD, already started and which will continue in the next months. Copyright © 2016 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.

  5. Platform for dynamic tests: preliminary studies, design and construction

    Directory of Open Access Journals (Sweden)

    J. E. Campuzano

    Full Text Available This paper is about the design and construction of a platform for dynamic tests especially with people jumping, walking, etc. Initially it was tried to find out projects already implemented in platforms and dynamic tests and to study the loads produced by movement of people on slabs and the structural response to these loads. The limits established by different standards have been also studied for these dynamic responses, taking into account the ultimate limit state, as well as the structure in service, since the human body is very sensitive to structural vibrations. Parametric studies were performed considering various configurations of slabs (different spans, thicknesses and conditions of support have been done, looking for a configuration that could have natural frequency close to the frequencies of the human loads. The slab should have dimensions compatible with the available physical space, fundamental frequency below 5 Hz and maximum immediate deflection compatible with the indications of the Brazilian standard NBR6118: 2007. Based on these criteria was chosen a rectangular structure consists of a solid reinforced concrete rectangular slab studded in two opposite edges of steel beams with shear connectors type U. The other two edges are free. The steel beams supporting the slab, in turn, are supported on eight metal profiles (two in each corner of the slab that are supported on two to two short columns of steel profile H. Profiles U in steel are welded to four columns, forming a horizontal frame. Numerical analysis of the dynamic test platform have been performed for free and forced vibration, for obtaining the natural frequencies and corresponding vibration modes, considering the self-weight of the structure and the load that simulates people's weight. After obtaining a structural configuration that fulfilled the stipulated requirements, the design of the slab taking into account the recommendations of the Brazilian standard NBR6118: 2007

  6. Relationship between the modified star excursion balance test and the 4x10 m shuttle run test in children

    Directory of Open Access Journals (Sweden)

    Joaquín Calatayud

    2017-01-01

    Full Text Available Resumen La agilidad y el equilibrio dinámico son habilidades cruciales en la actividad física prepuberal y la participación deportiva, por lo tanto es necesaria la identificación de pruebas eficientes para su evaluación. Evaluar la correlación entre la agilidad y el equilibrio dinámico en niños escolares de primaria. Veintisiete niños y veinte niñas de 10 años participaron voluntariamente en el estudio. El Star Excursion Balance Test (SEBT modificado y el 4x10 m Shuttle Run Test se utilizaron respectivamente para evaluar el equilibrio dinámico y agilidad. Las puntuaciones compuestas del equilibrio dinámico con apoyo diestro mostraron solo entre los niños una moderada correlación significativa (r = -0.51, p < 0.05 con la prueba de agilidad. Sin embargo, entre las niñas se mostró una correlación significativa (r = -0.45, p < 0.05 durante la distancia de alcance posterolateral obtenida en el SEBT. La realización del test completo o de las distancias alcanzadas a nivel posteromedial y posterolateral del SEBT se asocia moderadamente con la agilidad entre los niños, mientras que la distancia posterolateral se asocia con la agilidad entre las niñas.

  7. 78 FR 47217 - Proposed Supervisory Guidance on Implementing Dodd-Frank Act Company-Run Stress Tests for Banking...

    Science.gov (United States)

    2013-08-05

    ... Company-Run Stress Tests for Banking Organizations With Total Consolidated Assets of More Than $10 Billion...'') stress tests, applicable to all bank and savings-and-loan holding companies, national banks, state-member... ``$10-50 billion companies''). The guidance discusses supervisory expectations for DFA stress...

  8. Validity of the Pediatric Running-Based Anaerobic Sprint Test to Determine Anaerobic Performance in Healthy Children

    NARCIS (Netherlands)

    Bongers, Bart C.; Werkman, Maarten S.; Blokland, Donna; Eijsermans, Maria J. C.; van der Torre, Patrick; Bartels, Bart; Verschuren, Olaf; Takken, Tim

    2015-01-01

    Purpose: To determine criterion validity of the pediatric running-based anaerobic sprint test (RAST) as a nonsophisticated field test for evaluating anaerobic performance in healthy children and adolescents. Methods: Data from 65. healthy children (28 boys and 37 girls between 6 and 18 years of age,

  9. Environmental Survey preliminary report, Nevada Test Site, Mercury, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Nevada Test Site (NTS), conducted June 22 through July 10, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the NTS. The Survey covers all environment media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations and activities performed at the NTS, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by the Battelle Columbus Division under contract with DOE. When completed, the results will be incorporated into the NTS Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the NTS Survey. 165 refs., 42 figs., 52 tabs.

  10. Preliminary Tests Of The Decris-sc Ion Source

    CERN Document Server

    Efremov, A; Bechterev, V; Bogomolov, S L; Bondarenko, P G; Datskov, V I; Dmitriev, S; Drobin, V; Lebedev, A; Leporis, M; Malinowski, H; Nikiforov, A; Paschenko, S V; Seleznev, V; Shishov, Yu A; Smirnov, Yu; Tsvineva, G; Yakovlev, B; Yazvitsky, N Yu

    2004-01-01

    A new "liquid He-free" superconducting Electron Cyclotron Resonance Ion Source DECRIS-SC, to be used as injector for the IC-100 small cyclotron, has been designed by FLNR and LHE JINR. The main feature is that a compact refrigerator of Gifford-McMahon type is used to cool the solenoid coils. For the reason of very small cooling power at 4.2 K (about 1 W) our efforts were to optimize the magnetic structure and minimize an external heating of the coils. The maximum magnetic field strength is 3 T and 2 T in injection and extraction region respectively. For the radial plasma confinement a hexapole made of NdFeB permanent magnet is used. The source will be capable of ECR plasma heating using different frequencies (14 GHz or 18 GHz). To be able to deliver usable intensities of solids, the design is also allow axial access for evaporation oven and metal samples using the plasma sputtering technique. Very preliminary results of the source test are presented.

  11. Toxicological assessment of heavy straight run naphtha in a repeated dose/reproductive toxicity screening test.

    Science.gov (United States)

    McKee, Richard H; Steup, David; Schreiner, Ceinwen; Podhasky, Paula; Malley, Linda A; Roberts, Linda

    2014-01-01

    Gasoline blending stocks (naphthas) are comprised of normal, iso- and cycloparaffins and aromatic hydrocarbons with carbon numbers ranging from C4 to C12. Heavy straight run naphtha (HSRN, CAS number 64741-41-9) was selected for toxicity screening because substances of this type contain relatively high levels (28%) of cycloparaffins by comparison to other naphtha streams and the data complement toxicity information on other gasoline blending streams. Rats were exposed by inhalation to wholly vaporized material at levels of approximately 100, 500, or 3000 parts per million (ppm) daily to screen the potential for systemic toxicity, neurotoxicity, reproductive toxicity, and developmental effects to postnatal day 4. All animals survived the treatment period. Principal effects of repeated exposure included increased liver weights in males and females, increased kidney weights in males, and histological changes in the thyroid, secondary to liver enzyme induction. These changes were not considered to be toxicologically meaningful and are not relevant to humans. There were no treatment-related effects in functional observation tests or motor activity; no significant reductions in fertility or changes in other reproductive parameters; and no evidence of developmental toxicity in offspring. The overall no observed adverse effect concentration was 3000 ppm (approximately 13, 600 mg/m(3)). In conclusion the HSRN effects on liver and kidney are consistent with the results of other studies of volatile fractions or other naphthas or formulated gasoline, and there were no HSRN effects on neurological developmental or reproductive parameters.

  12. Long-Run Impact of Corn-Based Ethanol on the Grain, Oilseed, and Livestock Sectors: A Preliminary Assessment, The

    OpenAIRE

    Amani Elobeid; Simla Tokgoz; Dermot J. Hayes; Bruce A. Babcock; Hart, Chad E.

    2006-01-01

    The ongoing growth of corn-based ethanol production raises some fundamental questions about what impact continued growth will have on U.S. and world agriculture. Estimates of the long-run potential for ethanol production can be made by calculating the corn price at which the incentive to expand ethanol production disappears. Under current ethanol tax policy, if the prices of crude oil, natural gas, and distillers grains stay at current levels, then the break-even corn price is $4.05 per bushe...

  13. Apparatus and method for heat-run test on high-power PWM converters with low energy expenditure

    Indian Academy of Sciences (India)

    J S Siva Prasad; G Narayanan

    2013-06-01

    Before installation, a voltage source converter is usually subjected to heat-run test to verify its thermal design and performance under load. For heat-run test, the converter needs to be operated at rated voltage and rated current for a substantial length of time. Hence, such tests consume huge amount of energy in case of high-power converters. Also, the capacities of the source and loads available in the research and development (R & D) centre or the production facility could be inadequate to conduct such tests. This paper proposes a method to conduct heat-run tests on highpower, pulse width modulated (PWM) converters with low energy consumption. The experimental set-up consists of the converter under test and another converter (of similar or higher rating), both connected in parallel on the ac side and open on the dc side. Vector-control or synchronous reference frame control is employed to control the converters such that one draws certain amount of reactive power and the other supplies the same; only the system losses are drawn from the mains. The performance of the controller is validated through simulation and experiments. Experimental results, pertaining to heat-run tests on a high-power PWM converter, are presented at power levels of 25 kVA to 150 kVA.

  14. A New Content-Based Image Retrieval Using the Multidimensional Generalization of Wald-Wolfowitz Runs Test

    Science.gov (United States)

    Leauhatong, Thurdsak; Hamamoto, Kazuhiko; Atsuta, Kiyoaki; Kondo, Shozo

    This paper proposes two new similarity measures for the content-based image retrieval (CBIR) systems. The similarity measures are based on the k-means clustering algorithm and the multidimensional generalization of the Wald-Wolfowitz (MWW) runs test. The performance comparisons between the proposed similarity measures and a current CBIR similarity measure based on the MWW runs test were performed, and it can be seen that the proposed similarity measures outperform the current similarity measure with respect to the precision and the computational time.

  15. AGR-2 Irradiation Test Final As-Run Report, Rev 2

    Energy Technology Data Exchange (ETDEWEB)

    Collin, Blaise P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-08-01

    This document presents the as-run analysis of the AGR-2 irradiation experiment. AGR-2 is the second of the planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the U.S. Department of Energy as part of the Very High Temperature Reactor (VHTR) Technical Development Office (TDO) program. The objectives of the AGR-2 experiment are to: (a) Irradiate UCO (uranium oxycarbide) and UO2 (uranium dioxide) fuel produced in a large coater. Fuel attributes are based on results obtained from the AGR-1 test and other project activities. (b) Provide irradiated fuel samples for post-irradiation experiment (PIE) and safety testing. (c) Support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. The primary objective of the test was to irradiate both UCO and UO2 TRISO (tri-structural isotropic) fuel produced from prototypic scale equipment to obtain normal operation and accident condition fuel performance data. The UCO compacts were subjected to a range of burnups and temperatures typical of anticipated prismatic reactor service conditions in three capsules. The test train also includes compacts containing UO2 particles produced independently by the United States, South Africa, and France in three separate capsules. The range of burnups and temperatures in these capsules were typical of anticipated pebble bed reactor service conditions. The results discussed in this report pertain only to U.S. produced fuel. In order to achieve the test objectives, the AGR-2 experiment was irradiated in the B-12 position of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) for a total irradiation duration of 559.2 effective full power days (EFPD). Irradiation began on June 22, 2010, and ended on October 16, 2013, spanning 12 ATR power cycles and approximately three and a

  16. AGR-2 Irradiation Test Final As-Run Report, Rev 2

    Energy Technology Data Exchange (ETDEWEB)

    Blaise Collin

    2014-08-01

    This document presents the as-run analysis of the AGR-2 irradiation experiment. AGR-2 is the second of the planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the U.S. Department of Energy as part of the Very High Temperature Reactor (VHTR) Technical Development Office (TDO) program. The objectives of the AGR-2 experiment are to: (a) Irradiate UCO (uranium oxycarbide) and UO2 (uranium dioxide) fuel produced in a large coater. Fuel attributes are based on results obtained from the AGR-1 test and other project activities. (b) Provide irradiated fuel samples for post-irradiation experiment (PIE) and safety testing. (c) Support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. The primary objective of the test was to irradiate both UCO and UO2 TRISO (tri-structural isotropic) fuel produced from prototypic scale equipment to obtain normal operation and accident condition fuel performance data. The UCO compacts were subjected to a range of burnups and temperatures typical of anticipated prismatic reactor service conditions in three capsules. The test train also includes compacts containing UO2 particles produced independently by the United States, South Africa, and France in three separate capsules. The range of burnups and temperatures in these capsules were typical of anticipated pebble bed reactor service conditions. The results discussed in this report pertain only to U.S. produced fuel. In order to achieve the test objectives, the AGR-2 experiment was irradiated in the B-12 position of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) for a total irradiation duration of 559.2 effective full power days (EFPD). Irradiation began on June 22, 2010, and ended on October 16, 2013, spanning 12 ATR power cycles and approximately three and a half calendar years. The test

  17. Running the running

    CERN Document Server

    Cabass, Giovanni; Melchiorri, Alessandro; Pajer, Enrico; Silk, Joseph

    2016-01-01

    We use the recent observations of Cosmic Microwave Background temperature and polarization anisotropies provided by the Planck satellite experiment to place constraints on the running $\\alpha_\\mathrm{s} = \\mathrm{d}n_{\\mathrm{s}} / \\mathrm{d}\\log k$ and the running of the running $\\beta_{\\mathrm{s}} = \\mathrm{d}\\alpha_{\\mathrm{s}} / \\mathrm{d}\\log k$ of the spectral index $n_{\\mathrm{s}}$ of primordial scalar fluctuations. We find $\\alpha_\\mathrm{s}=0.011\\pm0.010$ and $\\beta_\\mathrm{s}=0.027\\pm0.013$ at $68\\%\\,\\mathrm{CL}$, suggesting the presence of a running of the running at the level of two standard deviations. We find no significant correlation between $\\beta_{\\mathrm{s}}$ and foregrounds parameters, with the exception of the point sources amplitude at $143\\,\\mathrm{GHz}$, $A^{PS}_{143}$, which shifts by half sigma when the running of the running is considered. We further study the cosmological implications of this anomaly by including in the analysis the lensing amplitude $A_L$, the curvature parameter ...

  18. AGR-1 Irradiation Test Final As-Run Report, Rev. 3

    Energy Technology Data Exchange (ETDEWEB)

    Collin, Blaise P. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-01-01

    This document presents the as-run analysis of the AGR-1 irradiation experiment. AGR-1 is the first of eight planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the US Department of Energy (DOE) as part of the Next-Generation Nuclear Plant (NGNP) project. The objectives of the AGR-1 experiment are: 1. To gain experience with multi-capsule test train design, fabrication, and operation with the intent to reduce the probability of capsule or test train failure in subsequent irradiation tests. 2. To irradiate fuel produced in conjunction with the AGR fuel process development effort. 3. To provide data that will support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. In order to achieve the test objectives, the AGR-1 experiment was irradiated in the B-10 position of the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) for a total duration of 620 effective full power days of irradiation. Irradiation began on December 24, 2006 and ended on November 6, 2009 spanning 13 ATR cycles and approximately three calendar years. The test contained six independently controlled and monitored capsules. Each capsule contained 12 compacts of a single type, or variant, of the AGR coated fuel. No fuel particles failed during the AGR-1 irradiation. Final burnup values on a per compact basis ranged from 11.5 to 19.6 %FIMA, while fast fluence values ranged from 2.21 to 4.39 x 1025 n/m2 (E >0.18 MeV). We’ll say something here about temperatures once thermal recalc is done. Thermocouples performed well, failing at a lower rate than expected. At the end of the irradiation, nine of the originally-planned 19 TCs were considered functional. Fission product release-to-birth (R/B) ratios were quite low. In most capsules, R/B values at the end of the irradiation were at or below

  19. Reliability and validity of data for 2 newly developed shuttle run tests in children with cerebral palsy

    NARCIS (Netherlands)

    Verschuren, Olaf; Takken, Tim; Ketelaar, Majolijn; Gorter, Jan Willem; Helders, Paul J. M.

    2006-01-01

    Background and Purpose. The purpose of this study was to examine the reliability and validity of data obtained with 2 newly developed shuttle run tests (SRT-I and SRT-II) to measure aerobic power in children with cerebral palsy (CP) who were classified at level I or II on the Gross Motor Function Cl

  20. Testing the running coupling $k_{T}$-factorization formula for the inclusive gluon production

    CERN Document Server

    Durães, F O; Goncalves, V P; Navarra, F S

    2016-01-01

    The inclusive gluon production at midrapidities is described in the Color Glass Condensate formalism using the $k_T$ - factorization formula, which was derived at fixed coupling constant considering the scattering of a dilute system of partons with a dense one. Recent analysis demonstrated that this approach provides a satisfactory description of the experimental data for the inclusive hadron production in $pp/pA/AA$ collisions. However, these studies are based on the fixed coupling $k_T$ - factorization formula, which does not take into account the running coupling corrections, which are important to set the scales present in the cross section. In this paper we consider the running coupling corrected $k_T$ - factorization formula conjectured some years ago and investigate the impact of the running coupling corrections on the observables. In particular, the pseudorapidity distributions and charged hadrons multiplicity are calculated considering $pp$, $dAu/pPb$ and $AuAu/PbPb$ collisions at RHIC and LHC energi...

  1. Testing the running coupling kT-factorization formula for the inclusive gluon production

    Science.gov (United States)

    Durães, F. O.; Giannini, A. V.; Gonçalves, V. P.; Navarra, F. S.

    2016-09-01

    The inclusive gluon production at midrapidities is described in the color glass condensate formalism using the kT-factorization formula, which was derived at fixed coupling constant considering the scattering of a dilute system of partons with a dense one. Recent analysis demonstrated that this approach provides a satisfactory description of the experimental data for the inclusive hadron production in p p /p A /A A collisions. However, these studies are based on the fixed coupling kT-factorization formula. This formula does not take into account the running coupling corrections, which are important to set the scales present in the cross section. In this paper we consider the running coupling corrected kT-factorization formula conjectured some years ago and investigate the impact of the running coupling corrections on the observables. In particular, the pseudorapidity distributions and charged hadrons' multiplicity are calculated considering p p , d A u /p P b , and A u A u /P b P b collisions at RHIC and LHC energies. We compare the corrected running coupling predictions with those obtained using the original kT-factorization assuming a fixed coupling or a prescription for the inclusion of the running of the coupling. Considering the Kharzeev-Levin-Nardi unintegrated gluon distribution and a simplified model for the nuclear geometry, we demonstrate that the distinct predictions are similar for the pseudorapidity distributions in p p /p A /A A collisions and for the charged hadrons' multiplicity in p p /p A collisions. On the other hand, the running coupling corrected kT-factorization formula predicts a smoother energy dependence for d N /d η in A A collisions.

  2. Accelerated stress testing of thin film solar cells: Development of test methods and preliminary results

    Science.gov (United States)

    Lathrop, J. W.

    1985-01-01

    If thin film cells are to be considered a viable option for terrestrial power generation their reliability attributes will need to be explored and confidence in their stability obtained through accelerated testing. Development of a thin film accelerated test program will be more difficult than was the case for crystalline cells because of the monolithic construction nature of the cells. Specially constructed test samples will need to be fabricated, requiring committment to the concept of accelerated testing by the manufacturers. A new test schedule appropriate to thin film cells will need to be developed which will be different from that used in connection with crystalline cells. Preliminary work has been started to seek thin film schedule variations to two of the simplest tests: unbiased temperature and unbiased temperature humidity. Still to be examined are tests which involve the passage of current during temperature and/or humidity stress, either by biasing in the forward (or reverse) directions or by the application of light during stress. Investigation of these current (voltage) accelerated tests will involve development of methods of reliably contacting the thin conductive films during stress.

  3. Reliability of the Three-minute All-out Test for Non-motorized Treadmill Tethered Running.

    Science.gov (United States)

    Gama, M C T; Sousa, F A B; Dos Reis, I G M; Gobatto, C A

    2016-07-13

    The 3-min all-out test was developed and validated on a cycle ergometer using a modification of a linear mathematical equation (1/time vs. power) obtained from the original critical power model. The purpose of this development was to obtain, in a single test, the aerobic and anaerobic capacity parameters and identify the exercise transition moment from heavy to severe intensity. The aim of this study was to propose an adaptation of the all-out 3-min cycle ergometer to a non-motorized treadmill with tethered running. In addition, we tested the reproducibility of this adapted protocol, highlighting the need for mechanical power evaluation using a specific ergometer. Consequently, 10 physically active individuals visited the laboratory 4 times for testing and data collection. The results suggested that the protocol adaptation for the 3-min all-out test for non-motorized treadmill with tethered running was reproducible and feasible. It was also possible to show that the AO3 application in this ergometer ensures the specificity of the sports that involve the running exercise, from assessment of both aerobic and anaerobic parameters, accomplished in a single day of application.

  4. Running Away

    Science.gov (United States)

    ... Emergency Room? What Happens in the Operating Room? Running Away KidsHealth > For Kids > Running Away Print A ... life on the streets. continue The Reality of Running Away When you think about running away, you ...

  5. Testing the running of the cosmological constant with Type Ia Supernovae at high z

    CERN Document Server

    Espana-Bonet, C; Shapiro, I L; Solà, J; Espana-Bonet, Cristina; Ruiz-Lapuente, Pilar; Shapiro, Ilya L.; Sola, Joan

    2004-01-01

    Within the Quantum Field Theory context the idea of a "cosmological constant" (CC) evolving with time looks quite natural as it just reflects the change of the vacuum energy with the typical energy of the universe. In the particular frame of Ref.[30], a "running CC" at low energies may arise from generic quantum effects near the Planck scale, M_P, provided there is a smooth decoupling of all massive particles below M_P. In this work we further develop the cosmological consequences of a "running CC" by addressing the accelerated evolution of the universe within that model. The rate of change of the CC stays slow, without fine-tuning, and is comparable to H^2 M_P^2. It can be described by a single parameter, \

  6. A novel mouse running wheel that senses individual limb forces: biomechanical validation and in vivo testing

    OpenAIRE

    Roach, Grahm C.; Edke, Mangesh; Griffin, Timothy M.

    2012-01-01

    Biomechanical data provide fundamental information about changes in musculoskeletal function during development, adaptation, and disease. To facilitate the study of mouse locomotor biomechanics, we modified a standard mouse running wheel to include a force-sensitive rung capable of measuring the normal and tangential forces applied by individual paws. Force data were collected throughout the night using an automated threshold trigger algorithm that synchronized force data with wheel-angle dat...

  7. Reliability of a Shuttle Run Test for Children with Cerebral Palsy Who Are Classified at Gross Motor Function Classification System Level III

    Science.gov (United States)

    Verschuren, Olaf; Bosma, Liesbeth; Takken, Tim

    2011-01-01

    For children and adolescents with cerebral palsy (CP) classified as Gross Motor Function Classification System (GMFCS) level III there is no running-based field test available to assess their cardiorespiratory fitness. The current study investigated whether a shuttle run test can be reliably (test-retest) performed in a group of children with…

  8. Preliminary test results from the CELSS Test Facility Engineering Development Unit

    Science.gov (United States)

    Kliss, Mark H.; Macelroy, R. D.; Blackwell, C. C.; Borchers, B. A.; Drews, M. E.; Longabaugh, J. R.; Yendler, B. S.; Zografos, A. I.

    1994-01-01

    As part of the NASA Controlled Ecological Life Support System (CELSS) Program, a CELSS Test Facility (CTF) is being planned for installation on the Space Station. The CTF will be used to provide data on the productivity and efficiency of a variety of CELSS higher plant crops grown in the microgravity environment of the Space Station. Tight environmental control will be maintained while data on gas exchange rates and biomass accumulation rates are collected. In order to obtain an early realistic determination of the subsystem and system requirements necessary to provide the environmental conditions specified for CTF crop productivity experiments, an Engineering Development Unit (EDU) has been designed, constructed and is in the process of subsystem and system testing at NASA Ames Research Center. The EDU is a ground test-bed which will be used to characterize the integrated performance of major subsystem technologies, to evaluate hardware candidates and control strategies required for the CTF, and to further define the ability to meet CTF requirements within present Space Station constraints. This paper reviews the functional requirements for the EDU, and focuses on the performance evaluation and test results of the various subsystems. Preliminary integrated performance results and control system operation are addressed, and plans for future science and technology testing are discussed.

  9. Percentile Values for Running Sprint Field Tests in Children Ages 6-17 Years: Influence of Weight Status

    Science.gov (United States)

    Castro-Pinero, Jose; Gonzalez-Montesinos, Jose Luis; Keating, Xiaofen D.; Mora, Jesus; Sjostrom, Michael; Ruiz, Jonatan R.

    2010-01-01

    The aim of this study was to provide percentile values for six different sprint tests in 2,708 Spanish children (1,234 girls) ages 6-17.9 years. We also examined the influence of weight status on sprint performance across age groups, with a focus on underweight and obese groups. We used the 20-m, 30-m, and 50-m running sprint standing start and…

  10. RUN COORDINATION

    CERN Multimedia

    M. Chamizo

    2012-01-01

      On 17th January, as soon as the services were restored after the technical stop, sub-systems started powering on. Since then, we have been running 24/7 with reduced shift crew — Shift Leader and DCS shifter — to allow sub-detectors to perform calibration, noise studies, test software upgrades, etc. On 15th and 16th February, we had the first Mid-Week Global Run (MWGR) with the participation of most sub-systems. The aim was to bring CMS back to operation and to ensure that we could run after the winter shutdown. All sub-systems participated in the readout and the trigger was provided by a fraction of the muon systems (CSC and the central RPC wheel). The calorimeter triggers were not available due to work on the optical link system. Initial checks of different distributions from Pixels, Strips, and CSC confirmed things look all right (signal/noise, number of tracks, phi distribution…). High-rate tests were done to test the new CSC firmware to cure the low efficiency ...

  11. Description and Preliminary Testing of the CDSN Seismic Sensor Systems

    Science.gov (United States)

    Peterson, Jon; Tilgner, Edwin E.

    1985-01-01

    INTRODUCTION The China Digital Seismograph Network (CDSN) is being designed and installed to provide the People's Republic of China with the facilities needed to create a national digital database for earthquake research. The CDSN, which is being developed jointly by the PRC State Seismological Bureau and the U.S. Geological Survey, will consist initially of nine digitally-recording seismograph stations, a data management system to be used for compiling network-day tapes, and a depot maintenance center. Data produced by the network will be shared with research scientists throughout the world. A national seismograph network must be designed to support a variety of research objectives. From this standpoint, the choices and tradeoffs involved in specifying signal bandwidth, resolution, and dynamic range are the most important decisions in system design. As in the case of the CDSN, these decisions are made during the selection and design of the seismic sensor system and encoder components. The purpose of this report is to describe the CDSN sensor systems, their important signal characteristics, and the results of preliminary tests that have been performed on the instruments. Four overlapping data bands will be recorded at each station: short period (SP), broadband (BB), long period (LP), and very long period (VLP). Amplitude response curves are illustrated in Figure I. Vertical and horizontal components will be recorded for each data band. The SP and LP channels will be recorded with sufficient sensitivities to resolve earth background noise at seismically quiet sites. The BB channels will have a lower sensitivity and are intended for broadband recording of moderate-to-large body-wave signals and for increasing the effective amplitude range in the short- and long-period bands. The VLP channel does not provide additional spectral coverage at long periods; its purpose is to make use of on-site filtration and decimation to reduce post processing requirements for VLP

  12. Plasma antioxidant responses and oxidative stress following a 20 meter shuttle run test in female volleyball players

    Directory of Open Access Journals (Sweden)

    Emre Özgür Bulduk

    2011-08-01

    Full Text Available The effect of physical exercise on oxidant stress and antioxidants has been investigated extensively in the last twenty years. Cells continuously produce free radicals under normal conditions during mitochondrial electron transport chain (ETC. Experimental studies have shown elevated metabolic rate by strenuous physical exercise induces oxidative stress and production of excessive amounts of free radicals. Lipid peroxidation occurs when free radicals react with cellular components involving polyunsaturated fatty acid residues of phospholipids which are very sensitive to oxidation. This study aimed to determine plasma antioxidant responses and oxidative stress following a 20 meter shuttle run test in female volleyball players. Ten female volleyball players from the same team, and ten sedentary female ages between 18-24 years old volunteered to participate in this study. They were in good health and 48 hours before the test did not receive any drug or alcohol. None of them had any endocrine, orthopedic problems. Before the study, Informed, written consent was obtained from all the participants after full explanation of the procedures involved. All procedures were approved by the Selçuk University Meram Medical School of Ethical Committee. 20 meter shuttle run test was designed to estimate the maximal aerobic power of athletes performing in sports with frequent stops and starts (eg. Basketball, volleyball, fencing and so on. Findings of our study demonstrate that in both female groups 20 meter shuttle run test leads to production of more reactive oxygen species than the antioxidant systems can scavenge. Decrease in the activities of these antioxidant enzymes may be due to their inactivation caused by the higher production of the free radicals. it seems that the vulnerability of the body to oxidative stress is significantly enhanced after strenuous exercise test.

  13. Preliminary Test Estimators and Phi-divergence Measures in Pooling Binomial Data

    Directory of Open Access Journals (Sweden)

    N. Martin

    2012-07-01

    Full Text Available Two independent random samples are drawn from two Binomial populations with parameters theta1 and  theta2 respectively. Ahmed (1991 considered a preliminary test estimator based on maximum likelihood estimator for estimating theta1 when it is suspected that theta1=theta2.  In this paper we combine minimum phi-divergence estimators as well as phi-divergence test statistics in order to define a preliminary phi-divergence test estimators. These new estimators are compared with the classical estimator as well as the pooled estimator.

  14. Preliminary Options Assessment of Versatile Irradiation Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sen, Ramazan Sonat [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    The objective of this report is to summarize the work undertaken at INL from April 2016 to January 2017 and aimed at analyzing some options for designing and building a versatile test reactor; the scope of work was agreed upon with DOE-NE. Section 2 presents some results related to KNK II and PRISM Mod A. Section 3 presents some alternatives to the VCTR presented in [ ] as well as a neutronic parametric study to assess the minimum power requirement needed for a 235U metal fueled fast test reactor capable to generate a fast (>100 keV) flux of 4.0 x 1015 n /cm2-s at the test location. Section 4 presents some results regarding a fundamental characteristic of test reactors, namely displacement per atom (dpa) in test samples. Section 5 presents the INL assessment of the ANL fast test reactor design FASTER. Section 6 presents a summary.

  15. ADDITIVE TESTING FOR IMPROVED SULFUR RETENTION: PRELIMINARY REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, J.; Fox, K.

    2011-09-07

    The Savannah River National Laboratory is collaborating with Alfred University to evaluate the potential for additives in borosilicate glass to improve sulfur retention. This preliminary report provides further background on the incorporation of sulfur in glass and outlines the experiments that are being performed by the collaborators. A simulated waste glass composition has been selected for the experimental studies. The first phase of experimental work will evaluate the impacts of BaO, PbO, and V{sub 2}O{sub 5} at concentrations of 1.0, 2.0, and 5.0 wt % on sulfate retention in simulated high level waste borosilicate glass. The second phase of experimental work will evaluate the effects of time at the melt temperature on sulfur retention. The resulting samples will be characterized to determine the amount of sulfur remaining as well as to identify the formation of any crystalline phases. The results will be used to guide the future selection of frits and glass forming chemicals in vitrifying Department of Energy wastes containing high sulfur concentrations.

  16. Radiation Testing on State-of-the-Art CMOS: Challenges, Plans, and Preliminary Results

    Science.gov (United States)

    LaBel, Kenneth A.; Cohn, Lewis M.

    2009-01-01

    At GOMAC 2007 and 2008, we discussed a variety of challenges for radiation testing of modern semiconductor devices and technologies [1, 2]. In this presentation, we provide more specific details in this on-going investigation focusing on out-of-the-box lessons observed for providing radiation effects assurances as well as preliminary test results.

  17. Interteaching and the Testing Effect: A Preliminary Analysis

    Science.gov (United States)

    Lambert, Tonya; Saville, Bryan K.

    2012-01-01

    In a number of studies, interteaching has produced better student-learning outcomes than traditional teaching methods. Little research, however, has examined ways to make interteaching more effective. Research on the testing effect suggests that frequent testing may improve performance. Thus, including postdiscussion quizzes as a part of…

  18. Fixed-bed gasifier and cleanup system engineering summary report through Test Run No. 100

    Energy Technology Data Exchange (ETDEWEB)

    Pater, K. Jr.; Headley, L.; Kovach, J.; Stopek, D.

    1984-06-01

    The state-of-the-art of high-pressure, fixed-bed gasification has been advanced by the many refinements developed over the last 5 years. A novel full-flow gas cleanup system has been installed and tested to clean coal-derived gases. This report summarizes the results of tests conducted on the gasifier and cleanup system from its inception through 1982. Selected process summary data are presented along with results from complementary programs in the areas of environmental research, process simulation, analytical methods development, and component testing. 20 references, 32 figures, 42 tables.

  19. Changes in Run Distance Observed in two explosives at the threshold for sustained ignition using the Modified Gap Test

    Science.gov (United States)

    Lee, Richard; Forbes, Jerry; Tasker, Douglas; Orme, Rebecca

    2009-06-01

    The Modified Gap Test was used to quantify different levels of partial reaction for various input stresses. This test configuration has been historically useful in highlighting thresholds for first reaction, sustained ignition, and detonation. Two different HMX based compositions were studied; a cast-cured composition with 88% HMX and a pressed composition with 92% HMX. The final ingredients of each comprised different unreactive polymeric binder systems. Short samples (50.8 mm in diameter and 12.7 mm thick) were shock loaded using the standard large scale gap test donor system. Product-cloud blow-off velocities at the opposite end of the sample were measured using a high-speed digital-camera. Velocity versus input pressure plots provided changes in reactivity that had developed by the 12.7 mm run distance. Results were fairly consistent for the lower input pressures. In contrast, the results varied widely in a range of input stresses around the transition threshold for sustained ignition in both explosives. These results indicate that both explosives are subject to variation in run to detonation distance in a range of input stresses just prior to prompt detonation.

  20. Preliminary test of effects of cognitive ability, experience, and teaching methods on Verbal Analogy Test scores.

    Science.gov (United States)

    Rosenberg, D; Willson-Quayle, A; Pasnak, R

    2000-06-01

    The methods from which one can choose when preparing for the GRE Verbal Analogies include books, software, audiotapes, and formal classroom instruction. What teaching method will work best for a given individual? To begin the search for an answer, Gray's test of reasoning ability was given to 28 undergraduates who also answered a questionnaire detailing their experience with analogies. They were randomly assigned to teaching conditions ranging from self-directed workbook study to intensive interactive assistance. No teaching method was superior overall, but interactions showed that (1) students who scored worst on the pretest improved the most, (2) those higher in cognitive functioning and experience performed better after intensive interactive assistance, and (3) those lower in both cognitive functioning and experience did significantly better with self-paced workbooks. This preliminary work suggests that it may be profitable to assess the prior experience and reasoning of potential students and adopt the methods for teaching formal operational thought found empirically to be most suitable.

  1. Preliminary low temperature tests of a digital signal processor

    Science.gov (United States)

    Zebulum, Ricardo S.; Ramesham, Rajeshuni; Stoica, Adrian; Keymeulen, Didier; Daud, Taher; Sekanina, Lukas

    2005-01-01

    This paper describes an initial experiment performed to assess the electrical behavior of the Innovative Integration board containing a Digital Signal Processor (DSP) with its JTAG (Blackhawk) connector at low temperatures. The objective of the experiment is to determine the lowest temperature at which the DSP can operate. The DSP was tested at various low-temperatures and a Genetic Algorithm was used as the DSP test program.

  2. CHALLENGE TESTS WITH LISTERIA MONOCYTOGENES IN SALAMI: PRELIMINARY RESULTS

    Directory of Open Access Journals (Sweden)

    R. Mioni

    2013-02-01

    Full Text Available Challenge tests are the preferable methodology to study the behaviour of Listeria monocytogenes on ready to eat foods, according to Regulation (EC 2073/2005. Challenge testing using L. monocytogenes in seasoned salami from different food business operators showed, after seasoning of the product, a count reduction of the inoculated organisms without any further growth of the pathogen; however differences of L. monocytogenes behaviour could be observed according to different production protocols.

  3. An educational intervention to increase awareness reduces unnecessary laboratory testing in an internal medicine resident-run clinic.

    Science.gov (United States)

    Leung, Erika; Song, Shuang; Al-Abboud, Omar; Shams, Shahed; English, John; Naji, Wisam; Huang, Yafei; Robison, Leon; Balis, Fred; Kawsar, Hameem I

    2017-07-01

    At our resident-run clinic in an underserved community, laboratory test costs in 2013 exceeded the government subsidy by $400 000. To optimize limited resources and improve patient care, an education program to reduce testing was implemented. Between November 2014 and January 2015, residents attended lectures on utilization of laboratory testing, focusing on standard practice guidelines, and analyses of unnecessary tests. Multivariate nonparametric statistical methods and subgroup analysis were used to evaluate cost reduction. There were 453 clinic visits during the intervention period and 471 visits during the control period. Lectures were independently associated with a significant laboratory cost reduction. Median laboratory cost per visit decreased from $106.00 to $74.00. Total cost in the study period decreased from $79 403 to $51 463. There were similar reductions of laboratory costs in two subgroups: age groups of <50 years and ≥50 years, new encounters, and follow-up visits . In the analysis of individual tests, the cost of TSH and Vitamin D tests had the greatest reduction ($8176 and $5088 respectively). An appropriate physician education program can reduce laboratory tests and costs. Screening tests with inadequate evidence support were reduced most, whereas those with proven benefits did not decrease significantly.

  4. 40 CFR 86.137-94 - Dynamometer test run, gaseous and particulate emissions.

    Science.gov (United States)

    2010-07-01

    ... such that the system meets the design criteria of § 86.109 and § 86.110. For samples in which the... necessary. (iv) For formaldehyde samples, the flow rates shall be set such that the system meets the design... according to the Urban Dynamometer Driving Schedule (§ 86.115). Note: During particulate testing, adjust the...

  5. Putting Google Scholar to the Test: A Preliminary Study

    Science.gov (United States)

    Robinson, Mary L.; Wusteman, Judith

    2007-01-01

    Purpose: To describe a small-scale quantitative evaluation of the scholarly information search engine, Google Scholar. Design/methodology/approach: Google Scholar's ability to retrieve scholarly information was compared to that of three popular search engines: Ask.com, Google and Yahoo! Test queries were presented to all four search engines and…

  6. On Designing Construct Driven Situational Judgment Tests: Some Preliminary Recommendations

    Science.gov (United States)

    Guenole, Nigel; Chernyshenko, Oleksandr S.; Weekly, Jeff

    2017-01-01

    Situational judgment tests (SJTs) are widely agreed to be a measurement technique. It is also widely agreed that SJTs are a questionable methodological choice for measurement of psychological constructs, such as behavioral competencies, due to a lack of evidence supporting appropriate factor structures and high internal consistencies.…

  7. Modeling and Testing of EVs - Preliminary Study and Laboratory Development

    DEFF Research Database (Denmark)

    Yang, Guang-Ya; Marra, Francesco; Nielsen, Arne Hejde;

    2010-01-01

    Electric vehicles (EVs) are expected to play a key role in the future energy management system to stabilize both supply and consumption with the presence of high penetration of renewable generation. A reasonably accurate model of battery is a key element for the study of EVs behavior and the grid...... tests, followed by the suggestions towards a feasible battery model for further studies....

  8. Preliminary tests of a damaged ship for CFD validation

    Directory of Open Access Journals (Sweden)

    Sungkyun Lee

    2012-06-01

    Full Text Available One of the most critical issues in naval architecture these days is the operational safety. Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions is the first to ensure for both commercial and military vessels. Unlike the intact stability cases, the assessment of the damaged ship stability is very complicated physical phenomena. Therefore it is widely acknowledged that computational fluid dynamics (CFD methods are one of most feasible approaches. In order to develop better CFD methods for damaged ship stability assessment, it is essential to perform well-designed model tests and to build a database for CFD validation. In the present study, free roll decay tests in calm water with both intact and damaged ships were performed and six degree-of-freedom (6DOF motion responses of intact ship in regular waves were measured. Through the free roll decay tests, the effects of the flooding water on the roll decay motion of a ship were investigated. Through the model tests in regular waves, the database that provides 6DOF motion responses of intact ship was established.

  9. Study and Preliminary Analysis of Test of Aerosol Migration Mechanism

    Institute of Scientific and Technical Information of China (English)

    CHEN; Lin-lin; SUN; Xue-ting; WEI; Yan-song

    2015-01-01

    TAMM(test of aerosol migration mechanism)is one of the important aspects of Studies on Migration Mechanism of the Source Term under Severe Accident,which is a significant research of the National Large Advanced PWR Research Program.The main task researches the

  10. Preliminary Results of Breakwater Round-Head Tests

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Z.

    1995-01-01

    The rational design diagram for Dolos armour should incorporate both the hydraulic stability and the structural integrity. The previous tests performed by Aalborg University (AU) made available such design diagram for the trunk of Dolos breakwater without superstructures (Burcharth et al. 1992...

  11. In vitro tests to evaluate immunotoxicity: A preliminary study.

    NARCIS (Netherlands)

    Carfi', M; Gennari, A; Malerba, I; Corsini, E; Pallardy, M; Pieters, R; Loveren, Henk van; Vohr, H W; Hartung, T; Gribaldo, L

    2007-01-01

    The implementation of Registration, Evaluation and Authorisation of new and existing Chemicals (REACH) will increase the number of laboratory animals used, if alternative methods will not be available. In the meantime, REACH promotes the use of in vitro tests and, therefore, a set of appropriated al

  12. Semantic Verbal Fluency test in dementia: Preliminary retrospective analysis

    Directory of Open Access Journals (Sweden)

    Marcos Lopes

    Full Text Available Abstract The Semantic Verbal Fluency (SVF test entails the generation of words from a given category within a pre-set time of 60 seconds. Objectives: To verify whether socio-demographic and clinical data of individuals with dementia correlate with the performance on the SVF test and to ascertain whether differences among the criteria of number of answers, clusters and data spread over the intervals, predict clinical results. Methods: This was a retrospective study of 49 charts of demented patients classified according to the Clinical Dementia Rating (CDR scale. We correlated education, age and gender, as well as CDR and Mini-Mental State Exam (MMSE scores with the number of answers, clustering and switching distributed over four 15-second intervals on the SVF test. Results: The correlation between number of answers and quartiles was weak (r=0.407, p=0.004; r=0.484, p<0.001 but correlation between the number of clusters and responses was strong (r=0.883, p<0.001. The number of items on the SVF was statistically significant with MMSE score (p=0.01 and there was a tendency for significance on the CDR (p=0.06. The results indicated little activity regarding what we propose to call cluster recalling in the two groups. Discussion: The SVF test, using number of items generated, was found to be more effective than classic screening tests in terms of speed and ease of application in patients with CDR 2 and 3.

  13. Multi-Stage 20-m Shuttle Run Fitness Test, Maximal Oxygen Uptake and Velocity at Maximal Oxygen Uptake.

    Science.gov (United States)

    Paradisis, Giorgos P; Zacharogiannis, Elias; Mandila, Dafni; Smirtiotou, Athanasia; Argeitaki, Polyxeni; Cooke, Carlton B

    2014-06-28

    The multi-stage 20-m shuttle run fitness test (20mMSFT) is a popular field test which is widely used to measure aerobic fitness by predicting maximum oxygen uptake (VO2max) and performance. However, the velocity at which VO2max occurs (vVO2max) is a better indicator of performance than VO2max, and can be used to explain inter-individual differences in performance that VO2max cannot. It has been reported as a better predictor for running performance and it can be used to monitor athletes' training for predicting optimal training intensity. This study investigated the validity and suitability of predicting VO2max and vVO2max of adult subjects on the basis of the performance of the 20mMST. Forty eight (25 male and 23 female) physical education students performed, in random order, a laboratory based continuous horizontal treadmill test to determine VO2max, vVO2max and a 20mMST, with an interval of 3 days between each test. The results revealed significant correlations between the number of shuttles in the 20mMSFT and directly determined VO2max (r = 0.87, pVO2max was y = 0.0276x + 27.504, whereas for vVO2max it was y = 0.0937x + 6.890. It can be concluded that the 20mMSFT can accurately predict VO2max and vVO2max and this field test can provide useful information regarding aerobic fitness of adults. The predicted vVO2max can be used in monitoring athletes, especially in determining optimal training intensity.

  14. Multi-Stage 20-m Shuttle Run Fitness Test, Maximal Oxygen Uptake and Velocity at Maximal Oxygen Uptake

    Directory of Open Access Journals (Sweden)

    Paradisis Giorgos P.

    2014-07-01

    Full Text Available The multi-stage 20-m shuttle run fitness test (20mMSFT is a popular field test which is widely used to measure aerobic fitness by predicting maximum oxygen uptake (VO2 max and performance. However, the velocity at which VO 2 max occurs (vVO 2 max is a better indicator of performance than VO 2 max, and can be used to explain inter-individual differences in performance that VO 2 max cannot. It has been reported as a better predictor for running performance and it can be used to monitor athletes’ training for predicting optimal training intensity. This study investigated the validity and suitability of predicting VO2max and vVO2max of adult subjects on the basis of the performance of the 20mMST. Forty eight (25 male and 23 female physical education students performed, in random order, a laboratory based continuous horizontal treadmill test to determine VO2max, vVO 2 max and a 20mMST, with an interval of 3 days between each test. The results revealed significant correlations between the number of shuttles in the 20mMSFT and directly determined VO 2 max (r = 0.87, p<0.05 and vVO 2 max (r = 0.93, p<0.05. The equation for prediction of VO 2 max was y = 0.0276x + 27.504, whereas for vVO 2 max it was y = 0.0937x + 6.890. It can be concluded that the 20mMSFT can accurately predict VO 2 max and vVO 2 max and this field test can provide useful information regarding aerobic fitness of adults. The predicted vVO 2 max can be used in monitoring athletes, especially in determining optimal training intensity.

  15. Results from the 1997 run of the LHCb ring imaging Cherenkov test-beam

    CERN Document Server

    Halley, A; Teixeira-Dias, P; Wilkinson, G; Wilkinson, Guy

    1998-01-01

    Analysis results of data from the ring imaging Cherenkov test-beam using hybrid photo diodes are presented. Details are given of the geometrical arrangement of the prototype and data-taking conditions, together with results of simulation and studies of the detector performance, photon yield and Cherenkov angle resolution using different radiators. Good agreement with simulation is found for both gas and aerogel photon yield calculations and the observed Cherenkov angle resolution.1

  16. Preliminary Results of Testing of Flow Effects on Evaporator Scaling

    Energy Technology Data Exchange (ETDEWEB)

    Hu, M.Z.

    2002-02-15

    This investigation has focused on the effects of fluid flow on solids deposition from solutions that simulate the feed to the 2H evaporator at the Savannah River Site. Literature studies indicate that the fluid flow (or shear) affects particle-particle and particle-surface interactions and thus the phenomena of particle aggregation in solution and particle deposition (i.e., scale formation) onto solid surfaces. Experimental tests were conducted with two configurations: (1) using a rheometer to provide controlled shear conditions and (2) using controlled flow of reactive solution through samples of stainless steel tubing. All tests were conducted at 80 C and at high silicon and aluminum concentrations, 0.133 M each, in solutions containing 4 M sodium hydroxide and 1 A4 each of sodium nitrate and sodium nitrite. Two findings from these experiments are important for consideration in developing approaches for reducing or eliminating evaporator scaling problems: (1) The rheometer tests suggested that for the conditions studied, maximum solids deposition occurs at a moderate shear rate, approximately 12 s{sup -1}. That value is expected to be on the order of shear rates that will occur in various parts of the evaporator system; for instance, a 6 gal/min single-phase liquid flow through the 2-in. lift or gravity drain lines would result in a shear rate of approximately 16 s{sup -1}. These results imply that engineering approaches aimed at reducing deposits through increased mixing would need to generate shear near all surfaces significantly greater than 12 s{sup -1}. However, further testing is needed to set a target value for shear that is applicable to evaporator operation. This is because the measured trend is not statistically significant at the 95% confidence interval due to variability in the results. In addition, testing at higher temperatures and lower concentrations of aluminum and silicon would more accurately represent conditions in the evaporator. Without

  17. The 10x5 metre shuttle run test may be a good predictor of aerobic performance in pre-pubertal children

    DEFF Research Database (Denmark)

    Christiansen, Christina; Petersen, Mette; Froberg, Karsten

    Sports. 2009. 2. Bar-Or O & Inbar O. Relationships among anaerobic capacity, sprint and middle distance running of school children. In Shephard, RJ. and Lavallée, H. eds., Physical fitness assessment. Springfield, 1978. 3. Inbar O & Bar-Or O. Relationships of anaerobic and aerobic arm and leg capacities...... to swimming performance of 8-12 year old children. In Shephard, R.J. and Lavallée, H. eds., Frontiers of activity and child health. Quebec: Pélican, 1977. 4. Andersen LB., et Al. An Intermittent running test to estimate maximal oxygen uptake: the Andersen test. J Sports Med Physical Fitness 2008....... in two field tests, the short shuttle run test (SSRT), 10x5 m measuring agility and speed , and the long modified 20 metre shuttle run, the Andersen test (AT) measuring cardio-respiratory fitness (4), representing anaerob and aerob performance respectively. Methods: The population and data was collected...

  18. Flight Test 4 Preliminary Results: NASA Ames SSI

    Science.gov (United States)

    Isaacson, Doug; Gong, Chester; Reardon, Scott; Santiago, Confesor

    2016-01-01

    Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. The Unmanned Aircraft System (UAS) Integration into the National Airspace System (NAS) Project conducted flight test program, referred to as Flight Test 4, at Armstrong Flight Research Center from April -June 2016. Part of the test flights were dedicated to the NASA Ames-developed Detect and Avoid (DAA) System referred to as JADEM (Java Architecture for DAA Extensibility and Modeling). The encounter scenarios, which involved NASA's Ikhana UAS and a manned intruder aircraft, were designed to collect data on DAA system performance in real-world conditions and uncertainties with four different surveillance sensor systems. Flight test 4 has four objectives: (1) validate DAA requirements in stressing cases that drive MOPS requirements, including: high-speed cooperative intruder, low-speed non-cooperative intruder, high vertical closure rate encounter, and Mode CS-only intruder (i.e. without ADS-B), (2) validate TCASDAA alerting and guidance interoperability concept in the presence of realistic sensor, tracking and navigational errors and in multiple-intruder encounters against both cooperative and non-cooperative intruders, (3) validate Well Clear Recovery guidance in the presence of realistic sensor, tracking and navigational errors, and (4) validate DAA alerting and guidance requirements in the presence of realistic sensor, tracking and navigational errors. The results will be

  19. Washing Up with Hot and Cold Running Neutrons: Tests of Fundamental Physical Laws

    Science.gov (United States)

    Lamoreaux, Steve K.

    2005-05-01

    The properties of the Neutron and its interactions with matter have been long applied to tests of fundamental physical principles. An example of such an application is a test of the stability of the fundamental constants of physics based on possible changes in low energy absorption resonances and the isotopic composition of a prehistoric natural reactor that operated two billion years ago in equatorial Africa. A recent re-analysis of this event indicates that some fundamental constants have changed. The focus of the presentation will be on the uses of cold and ultracold neutrons (UCNs), and in particular, the experimental search for the neutron electric dipole moment (EDM) which would be evidence for time reversal asymmetry in the microscopic interactions within the neutron. Ultracold neutrons are neutrons with kinetic energy sufficiently low that they can be reflected from material surfaces for all angles of incidence, allowing UCNs to be stored in material bottles for times approaching the beta decay lifetime of the neutron. Vagaries associated with the production, transport, and storage of UCNs will be described, and an overview progress on development of a new neutron EDM experiment to be operated at LANSCE will be presented. This new experiment has potential to improve the measurement sensitivity by a factor of 100. Although an EDM has not be observed for any elementary particle, experimental limits have been crucial for testing extensions to the so-called Standard Model of Electroweak Interactions. Our anticipated sensitivity will be sufficient to address questions regarding the observed matter-antimatter asymmetry in the Universe.

  20. Running and cycling economy in athletes; determining factors,training interventions and testing

    OpenAIRE

    Støren, Øyvind

    2009-01-01

    Løps- og sykkeløkonomi hos idrettsutøvere; bestemmende faktorer,treningsintervensjoner og testingArbeidet som denne doktorgradsavhandlingen er basert på ble utført ved Norges teknisk-naturvitenskapelige universitet og Høgskolen i Telemark. Det består av en rekke på fem eksperimentelle studier som har undersøkt bestemmende faktorer for løps- og sykkeløkonomi, treningsintervensjoner og testmetoder. De viktigste målemetodene i dette doktorgradsarbeidet var målinger av oksygenopptak under submaks...

  1. Preliminary operational results of the industrial process heat field tests

    Energy Technology Data Exchange (ETDEWEB)

    Kutscher, C.; Davenport, R.

    1980-04-01

    There are currently six DOE-funded solar industrial process heat (IPH) field tests which have been operational for one year or longer. These are all low temperature first generation projects which supply heat at temperatures below 100/sup 0/C - three hot water and three hot air. During the 1979 calendar year, personnel from the Solar Energy Research Institute (SERI) visited all of these sites; the performance and cost results obtained for each project and the operational problems encountered at each site are discussed.

  2. The use of portable NIRS to measure muscle oxygenation and haemodynamics during a repeated sprint running test.

    Science.gov (United States)

    Jones, Ben; Hesford, Catherine M; Cooper, Chris E

    2013-01-01

    Portable near-infrared spectroscopy (NIRS) devices were originally developed for use in exercise and sports science by Britton Chance in the 1990s (the RunMan and microRunman series). However, only recently with the development of more robust, and wireless systems, has the routine use in elite sport become possible. As with the medical use of NIRS, finding applications of the technology that are relevant to practitioners is the key issue. One option is to use NIRS to track exercise training-induced adaptations in muscle. Portable NIRS devices enable monitoring during the normal 'field' routine uses to assess fitness, such as repeat sprint shuttle tests. Knowledge about the acute physiological responses to these specific tests has practical applications within team sport training prescription, where development of both central and peripheral determinants of high-intensity intermittent exercise needs to be considered. The purpose of this study was to observe NIRS-detected parameters during a repeat sprint test. We used the PortaMon, a two wavelength spatially resolved NIR spectrometer manufactured by Artinis Inc., to assess NIR changes in the gastrocnemius muscle of both the left and right leg during high-intensity running. Six university standard rugby players were assessed (age 20 ± 1.5 years; height 183 ± 1.0 cm; weight 89.4 ± 5.8 kg; body fat 12.2 ± 3.0 %); the subjects completed nine repeated shuttle runs, which incorporated forward, backward and change of direction movements. Individual sprint time, total time to complete test, blood lactate response (BL), heart rate values (HR) and haemoglobin variables (ΔHHb, ΔtHb, ΔHbO2 and ΔTSI%) were measured. Total time to complete the test was 260 ± 20 s, final blood lactate was 14.3 ± 2.8 mM, and maximal HR 182 ± 5 bpm. NIRS variables displayed no differences between right and left legs. During the test, the group-averaged data showed a clear decrease in HbO2 (max. decrease 11.41 ± 4.95 μM), increase in HHb

  3. Preliminary results of the round-robin testing of F82H

    Energy Technology Data Exchange (ETDEWEB)

    Shiba, K.; Yamanouchi, N.; Tohyama, A.

    1996-10-01

    Preliminary results of metallurgical, physical and mechanical properties of low activation ferritic steel F82H (IEA heat) were obtained in the round-robin test in Japan. The properties of IEA heat F82H were almost the same as the original F82H.

  4. Preliminary results of a proficiency testing of industrial CT scanners using small polymer items

    DEFF Research Database (Denmark)

    Angel, Jais Andreas Breusch; Cantatore, Angela; De Chiffre, Leonardo

    2012-01-01

    This work presents preliminary results concerning a proficiency testing for intercomparison of industrial CT scanners. Two audit items, similar to common industrial parts, were selected for circulation. The two items were a single polymer complex geometry part and a simple geometry item made of two...

  5. Preliminary Investigation of the 1991 Medical College Admission Test Factor Structure.

    Science.gov (United States)

    Li, Weichang; Mitchell, Karen J.

    A substantially revised Medical College Admission Test (MCAT) was introduced in spring 1991. The new examination is designed to assess critical thinking skills, basic concepts and problem solving facility in science, and writing skills. This paper reports preliminary findings on the factor structure of the revised MCAT, which consists of four…

  6. Sizing and preliminary hardware testing of solar powered UAV

    Directory of Open Access Journals (Sweden)

    S. Jashnani

    2013-12-01

    Full Text Available Integrating solar energy into modern aircraft technology has been a topic of interest and has received a lot of attention from researchers over the last two decades. A few among the many potential applications of this technology are the possibility of continuous self sustained flight for purposes such as information relay, surveillance and monitoring. This paper discusses the altitude and payload mass, as independent parameters, and their influence on the size and design of the aircraft. To estimate available solar power, two different models have been presented; one for low altitudes and the other for high altitudes. An engineering ground model was built to simulate the power and propulsion system over 24 h of continuous operation. The paper presents data from tests performed till date and lessons learnt while dealing with the construction of the engineering ground model as well as changes that can be made to improve the design.

  7. Trial-Run of a Junction-Box Attachment Test for Use in Photovoltaic Module Qualification: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D. C.; Deibert, S. L.; Wohlgemuth, J. H.

    2014-06-01

    Engineering robust adhesion of the junction box (j-box) is a hurdle typically encountered by photovoltaic module manufacturers during product development and manufacturing process control. There are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp-heat,' 'thermal-cycle,' or 'creep' tests within the IEC qualification protocol is proposed to verify the basic robustness of the adhesion system. The details of the proposed test are described, in addition to a trial-run of the test procedure. The described experiments examine four moisture-cured silicones, four foam tapes, and a hot-melt adhesive used in conjunction with glass, KPE, THV, and TPE substrates. For the purpose of validating the experiment, j-boxes were adhered to a substrate, loaded with a prescribed weight, and then subjected to aging. The replicate mock-modules were aged in an environmental chamber (at 85 degrees C/85% relative humidity for 1000 hours; then 100 degrees C/<10% relative humidity for 200 hours) or fielded in Golden (CO), Miami (FL), and Phoenix (AZ) for one year. Attachment strength tests, including pluck and shear test geometries, were also performed on smaller component specimens.

  8. Testing on a Large Scale Running the ATLAS Data Acquisition and High Level Trigger Software on 700 PC Nodes

    CERN Document Server

    Burckhart-Chromek, Doris; Adragna, P; Alexandrov, L; Amorim, A; Armstrong, S; Badescu, E; Baines, J T M; Barros, N; Beck, H P; Bee, C; Blair, R; Bogaerts, J A C; Bold, T; Bosman, M; Caprini, M; Caramarcu, C; Ciobotaru, M; Comune, G; Corso-Radu, A; Cranfield, R; Crone, G; Dawson, J; Della Pietra, M; Di Mattia, A; Dobinson, Robert W; Dobson, M; Dos Anjos, A; Dotti, A; Drake, G; Ellis, Nick; Ermoline, Y; Ertorer, E; Falciano, S; Ferrari, R; Ferrer, M L; Francis, D; Gadomski, S; Gameiro, S; Garitaonandia, H; Gaudio, G; George, S; Gesualdi-Mello, A; Gorini, B; Green, B; Haas, S; Haberichter, W N; Hadavand, H; Haeberli, C; Haller, J; Hansen, J; Hauser, R; Hillier, S J; Höcker, A; Hughes-Jones, R E; Joos, M; Kazarov, A; Kieft, G; Klous, S; Kohno, T; Kolos, S; Korcyl, K; Kordas, K; Kotov, V; Kugel, A; Landon, M; Lankford, A; Leahu, L; Leahu, M; Lehmann-Miotto, G; Le Vine, M J; Liu, W; Maeno, T; Männer, R; Mapelli, L; Martin, B; Masik, J; McLaren, R; Meessen, C; Meirosu, C; Mineev, M; Misiejuk, A; Morettini, P; Mornacchi, G; Müller, M; Garcia-Murillo, R; Nagasaka, Y; Negri, A; Padilla, C; Pasqualucci, E; Pauly, T; Perera, V; Petersen, J; Pope, B; Albuquerque-Portes, M; Pretzl, K; Prigent, D; Roda, C; Ryabov, Yu; Salvatore, D; Schiavi, C; Schlereth, J L; Scholtes, I; Sole-Segura, E; Seixas, M; Sloper, J; Soloviev, I; Spiwoks, R; Stamen, R; Stancu, S; Strong, S; Sushkov, S; Szymocha, T; Tapprogge, S; Teixeira-Dias, P; Torres, R; Touchard, F; Tremblet, L; Ünel, G; Van Wasen, J; Vandelli, W; Vaz-Gil-Lopes, L; Vermeulen, J C; von der Schmitt, H; Wengler, T; Werner, P; Wheeler, S; Wickens, F; Wiedenmann, W; Wiesmann, M; Wu, X; Yasu, Y; Yu, M; Zema, F; Zobernig, H; Computing In High Energy and Nuclear Physics

    2006-01-01

    The ATLAS Data Acquisition (DAQ) and High Level Trigger (HLT) software system will be comprised initially of 2000 PC nodes which take part in the control, event readout, second level trigger and event filter operations. This high number of PCs will only be purchased before data taking in 2007. The large CERN IT LXBATCH facility provided the opportunity to run in July 2005 online functionality tests over a period of 5 weeks on a stepwise increasing farm size from 100 up to 700 PC dual nodes. The interplay between the control and monitoring software with the event readout, event building and the trigger software has been exercised the first time as an integrated system on this large scale. New was also to run algorithms in the online environment for the trigger selection and in the event filter processing tasks on a larger scale. A mechanism has been developed to package the offline software together with the DAQ/HLT software and to distribute it via peer-to-peer software efficiently to this large pc cluster. T...

  9. Testing on a Large Scale running the ATLAS Data Acquisition and High Level Trigger Software on 700 PC Nodes

    CERN Document Server

    Burckhart-Chromek, Doris; Adragna, P; Albuquerque-Portes, M; Alexandrov, L; Amorim, A; Armstrong, S; Badescu, E; Baines, J T M; Barros, N; Beck, H P; Bee, C; Blair, R; Bogaerts, J A C; Bold, T; Bosman, M; Caprini, M; Caramarcu, C; Ciobotaru, M; Comune, G; Corso-Radu, A; Cranfield, R; Crone, G; Dawson, J; Della Pietra, M; Di Mattia, A; Dobinson, Robert W; Dobson, M; Dos Anjos, A; Dotti, A; Drake, G; Ellis, Nick; Ermoline, Y; Ertorer, E; Falciano, S; Ferrari, R; Ferrer, M L; Francis, D; Gadomski, S; Gameiro, S; Garcia-Murillo, R; Garitaonandia, H; Gaudio, G; George, S; Gesualdi-Mello, A; Gorini, B; Green, B; Haas, S; Haberichter, W N; Hadavand, H; Haeberli, C; Haller, J; Hansen, J; Hauser, R; Hillier, S J; Hughes-Jones, R E; Höcker, A; Joos, M; Kazarov, A; Kieft, G; Klous, S; Kohno, T; Kolos, S; Korcyl, K; Kordas, K; Kotov, V; Kugel, A; Landon, M; Lankford, A; Le Vine, M J; Leahu, L; Leahu, M; Lehmann-Miotto, G; Liu, W; Maeno, T; Mapelli, L; Martin, B; Masik, J; McLaren, R; Meessen, C; Meirosu, C; Mineev, M; Misiejuk, A; Morettini, P; Mornacchi, G; Männer, R; Müller, M; Nagasaka, Y; Negri, A; Padilla, C; Pasqualucci, E; Pauly, T; Perera, V; Petersen, J; Pope, B; Pretzl, K; Prigent, D; Roda, C; Ryabov, Yu; Salvatore, D; Schiavi, C; Schlereth, J L; Scholtes, I; Seixas, M; Sloper, J; Sole-Segura, E; Soloviev, I; Spiwoks, R; Stamen, R; Stancu, S; Strong, S; Sushkov, S; Szymocha, T; Tapprogge, S; Teixeira-Dias, P; Torres, R; Touchard, F; Tremblet, L; Van Wasen, J; Vandelli, W; Vaz-Gil-Lopes, L; Vermeulen, J C; Wengler, T; Werner, P; Wheeler, S; Wickens, F; Wiedenmann, W; Wiesmann, M; Wu, X; Yasu, Y; Yu, M; Zema, F; Zobernig, H; von der Schmitt, H; Ünel, G; Computing In High Energy and Nuclear Physics

    2006-01-01

    The ATLAS Data Acquisition (DAQ) and High Level Trigger (HLT) software system will be comprised initially of 2000 PC nodes which take part in the control, event readout, second level trigger and event filter operations. This high number of PCs will only be purchased before data taking in 2007. The large CERN IT LXBATCH facility provided the opportunity to run in July 2005 online functionality tests over a period of 5 weeks on a stepwise increasing farm size from 100 up to 700 PC dual nodes. The interplay between the control and monitoring software with the event readout, event building and the trigger software has been exercised the first time as an integrated system on this large scale. New was also to run algorithms in the online environment for the trigger selection and in the event filter processing tasks on a larger scale. A mechanism has been developed to package the offline software together with the DAQ/HLT software and to distribute it via peer-to-peer software efficiently to this large pc cluster. T...

  10. Preliminary Scaling Estimate for Select Small Scale Mixing Demonstration Tests

    Energy Technology Data Exchange (ETDEWEB)

    Wells, Beric E.; Fort, James A.; Gauglitz, Phillip A.; Rector, David R.; Schonewill, Philip P.

    2013-09-12

    The Hanford Site double-shell tank (DST) system provides the staging location for waste that will be transferred to the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Specific WTP acceptance criteria for waste feed delivery describe the physical and chemical characteristics of the waste that must be met before the waste is transferred from the DSTs to the WTP. One of the more challenging requirements relates to the sampling and characterization of the undissolved solids (UDS) in a waste feed DST because the waste contains solid particles that settle and their concentration and relative proportion can change during the transfer of the waste in individual batches. A key uncertainty in the waste feed delivery system is the potential variation in UDS transferred in individual batches in comparison to an initial sample used for evaluating the acceptance criteria. To address this uncertainty, a number of small-scale mixing tests have been conducted as part of Washington River Protection Solutions’ Small Scale Mixing Demonstration (SSMD) project to determine the performance of the DST mixing and sampling systems.

  11. Comparison of VO2 Max Prediction Value, Physiological Response, and Borg Scale between 12-Minute and 3200-Meter Run Fitness Tests among Indonesian Army Soldiers

    Directory of Open Access Journals (Sweden)

    Maulidi Abdillah

    2016-09-01

    Full Text Available Objective: To compare the VO2 max and physiological responses between 12-minute and 3200-meter run fitness tests. Methods: The subjects were 40 soldiers aged 18–21 years old of the Infantry Battalion 303/SSM of Cikajang, Garut, West Java, Indonesia. The 12-minute and 3200-meter run fitness tests were conducted with one week resting period. The measurement of the VO2 max prediction was based on each of the formulations and the measurement of physiological response included blood pressure, heart rate, respiratory rate, Borg scale and oxygen saturation before and after the tests. This study used a cross-sectional method while the data were analyzed statistically using t-test (p=0.05. Results: The results showed that the VO2 max prediction in 12-minute run fitness test was 52.046±2.980 mL/KgBB/min and the 3200-meter run test was 55.323±3.238 mL/KgBB/min. The value was statistically significant (p=0.008. There was no significant difference in the physiological response in both tests, except the SpO2 parameter after the tests (p=0.021. Conclusions: There is a significant difference in VO2 max prediction between 12 minutes and 3200 meter run test. No significant difference was found in the physiological response in both tests, except the SpO2 parameter.

  12. Running GCM physics and dynamics on different grids: Algorithm and tests

    Science.gov (United States)

    Molod, A.

    2006-12-01

    The major drawback in the use of sigma coordinates in atmospheric GCMs, namely the error in the pressure gradient term near sloping terrain, leaves the use of eta coordinates an important alternative. A central disadvantage of an eta coordinate, the inability to retain fine resolution in the vertical as the surface rises above sea level, is addressed here. An `alternate grid' technique is presented which allows the tendencies of state variables due to the physical parameterizations to be computed on a vertical grid (the `physics grid') which retains fine resolution near the surface, while the remaining terms in the equations of motion are computed using an eta coordinate (the `dynamics grid') with coarser vertical resolution. As a simple test of the technique a set of perpetual equinox experiments using a simplified lower boundary condition with no land and no topography were performed. The results show that for both low and high resolution alternate grid experiments, much of the benefit of increased vertical resolution for the near surface meridional wind (and mass streamfield) can be realized by enhancing the vertical resolution of the `physics grid' in the manner described here. In addition, approximately half of the increase in zonal jet strength seen with increased vertical resolution can be realized using the `alternate grid' technique. A pair of full GCM experiments with realistic lower boundary conditions and topography were also performed. It is concluded that the use of the `alternate grid' approach offers a promising way forward to alleviate a central problem associated with the use of the eta coordinate in atmospheric GCMs.

  13. Adolescent Girls' Preferences Pertaining to Cardiovascular Fitness Testing: A Comparison between the One-Mile Run and PACER Tests

    Science.gov (United States)

    Wilkinson, Carol; Brown, Lanell; Graser, Sue Vincent; Pennington, Todd R.

    2012-01-01

    Many adolescent girls are not participating in the recommended levels of physical activity (PA) and are at risk for unhealthy lifestyles (U.S. Department of Health and Human Services, 2008). Helping girls understand the importance of PA and giving them positive experiences in physical education classes, including fitness testing, may help to…

  14. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2007-08-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  15. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2010-06-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  16. [Information Concerning Mean Test Scores for the Graduate Management Admission Test (GMAT), Graduate Record Examinations (GRE), Law School Admission Test (LSAT), Preliminary Scholastic Aptitude Test (PSAT), and Scholastic Aptitude Test (SAT) for the National Commission on Excellence in Education.

    Science.gov (United States)

    Solomon, Robert J.

    Data are provided to the National Commission on Excellence in Education on the Graduate Management Admission Test (GMAT), Graduate Record Examinations (GRE), Law School Admission Test (LSAT), Preliminary Scholastic Aptitude Test (PSAT), and Scholastic Aptitude Test (SAT). Statistics are provided on the following: yearly GMAT mean scores 1965-1966…

  17. Measuring fitness of Kenyan children with polyparasitic infections using the 20-meter shuttle run test as a morbidity metric.

    Directory of Open Access Journals (Sweden)

    Amaya L Bustinduy

    2011-07-01

    Full Text Available To date, there has been no standardized approach to the assessment of aerobic fitness among children who harbor parasites. In quantifying the disability associated with individual or multiple chronic infections, accurate measures of physical fitness are important metrics. This is because exercise intolerance, as seen with anemia and many other chronic disorders, reflects the body's inability to maintain adequate oxygen supply (VO(2 max to the motor tissues, which is frequently linked to reduced quality-of-life in terms of physical and job performance. The objective of our study was to examine the associations between polyparasitism, anemia, and reduced fitness in a high risk Kenyan population using novel implementation of the 20-meter shuttle run test (20mSRT, a well-standardized, low-technology physical fitness test.Four villages in coastal Kenya were surveyed during 2009-2010. Children 5-18 years were tested for infection with Schistosoma haematobium (Sh, malaria, filaria, and geohelminth infections by standard methods. After anthropometric and hemoglobin testing, fitness was assessed with the 20 mSRT. The 20 mSRT proved easy to perform, requiring only minimal staff training. Parasitology revealed high prevalence of single and multiple parasitic infections in all villages, with Sh being the most common (25-62%. Anemia prevalence was 45-58%. Using multiply-adjusted linear modeling that accounted for household clustering, decreased aerobic capacity was significantly associated with anemia, stunting, and wasting, with some gender differences.The 20 mSRT, which has excellent correlation with VO(2, is a highly feasible fitness test for low-resource settings. Our results indicate impaired fitness is common in areas endemic for parasites, where, at least in part, low fitness scores are likely to result from anemia and stunting associated with chronic infection. The 20 mSRT should be used as a common metric to quantify physical fitness and compare sub

  18. Construction of PREMUX and preliminary experimental results, as preparation for the HCPB breeder unit mock-up testing

    Energy Technology Data Exchange (ETDEWEB)

    Hernández, F., E-mail: francisco.hernandez@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany); Kolb, M. [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-WPT) (Germany); Annabattula, R. [Indian Institute of Technology Madras (IITM), Department of Mechanical Engineering (India); Weth, A. von der [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany)

    2014-10-15

    Highlights: • PREMUX has been constructed as preparation for a future out-of-pile thermo-mechanical qualification of a HCPB breeder unit mock-up. • The rationale and constructive details of PREMUX are reported in this paper. • PREMUX serves as a test rig for the new heater system developed for the HCPB-BU mock-up. • PREMUX will be used as benchmark for the thermal and thermo-mechanical models developed in ANSYS for the pebble beds of the HCPB-BU. • Preliminary results show the functionality of PREMUX and the good agreement of the measured temperatures with the thermal model developed in ANSYS. - Abstract: One of the European blanket designs for ITER is the Helium Cooled Pebble Bed (HCPB) blanket. The core of the HCPB-TBM consists of so-called breeder units (BUs), which encloses beryllium as neutron multiplier and lithium orthosilicate (Li{sub 4}SiO{sub 4}) as tritium breeder in form of pebble beds. After the design phase of the HCPB-BU, a non-nuclear thermal and thermo-mechanical qualification program for this device is running at the Karlsruhe Institute of Technology. Before the complex full scale BU testing, a pre-test mock-up experiment (PREMUX) has been constructed, which consists of a slice of the BU containing the Li{sub 4}SiO{sub 4} pebble bed. PREMUX is going to be operated under highly ITER-relevant conditions and has the following goals: (1) as a testing rig of new heater concept based on a matrix of wire heaters, (2) as benchmark for the existing finite element method (FEM) codes used for the thermo-mechanical assessment of the Li{sub 4}SiO{sub 4} pebble bed, and (3) in situ measurement of thermal conductivity of the Li{sub 4}SiO{sub 4} pebble bed during the tests. This paper describes the construction of PREMUX, its rationale and the experimental campaign planned with the device. Preliminary results testing the algorithm used for the temperature reconstruction of the pebble bed are reported and compared qualitatively with first analyses

  19. Standard guide for measuring the wear volumes of piston ring segments run against flat coupons in reciprocating wear tests

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This guide covers and describes a profiling method for use accurately measuring the wear loss of compound-curved (crowned) piston ring specimens that run against flat counterfaces. It does not assume that the wear scars are ideally flat, as do some alternative measurement methods. Laboratory-scale wear tests have been used to evaluate the wear of materials, coatings, and surface treatments that are candidates for piston rings and cylinder liners in diesel engines or spark ignition engines. Various loads, temperatures, speeds, lubricants, and durations are used for such tests, but some of them use a curved piston ring segment as one sliding partner and a flat or curved specimen (simulating the cylinder liner) as its counterface. The goal of this guide is to provide more accurate wear measurements than alternative approaches involving weight loss or simply measuring the length and width of the wear marks. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its ...

  20. Reliability of a Cycle Ergometer Peak Power Test in Running-based Team Sport Athletes: A Technical Report.

    Science.gov (United States)

    Wehbe, George M; Gabbett, Tim J; Hartwig, Timothy B; Mclellan, Christopher P

    2015-07-01

    Given the importance of ensuring athletes train and compete in a nonfatigued state, reliable tests are required to regularly monitor fatigue. The purpose of this study was to investigate the reliability of a cycle ergometer to measure peak power during short maximal sprint cycle efforts in running-based team sport athletes. Fourteen professional male Australian rules footballers performed a sprint cycle protocol during 3 separate trials, with each trial separated by 7 days. The protocol consisted of a standardized warm-up, a maximal 6-second sprint cycle effort, a 1-minute active recovery, and a second maximal 6-second sprint cycle effort. Peak power was recorded as the highest power output of the 2 sprint cycle efforts. Absolute peak power (mean ± SD) was 1502 ± 202, 1498 ± 191, and 1495 ± 210 W for trials 1, 2, and 3, respectively. The mean coefficient of variation, intraclass correlation coefficient, and SE of measurement for peak power between trials was 3.0% (90% confidence intervals [CIs] = 2.5-3.8%), 0.96 (90% CIs = 0.91-0.98), and 39 W, respectively. The smallest worthwhile change for relative peak power was 6.0%, which equated to 1.03 W·kg⁻¹. The cycle ergometer sprint test protocol described in this study is highly reliable in elite Australian rules footballers and can be used to track meaningful changes in performance over time, making it a potentially useful fatigue-monitoring tool.

  1. Preliminary report: in-plant safety/relief valve discharge load test, Monticello Plant

    Energy Technology Data Exchange (ETDEWEB)

    Chang, H.C. (comp.)

    1976-12-01

    This preliminary report covers the results of the test program of safety/relief valve (SRV) discharge load phenomena and the effects upon the Mark I primary containment torus structure of the Monticello Nuclear Power Plant. The objectives of the test were to provide a data base for verifying/improving analytical models and to measure the structural response of the torus to SRV discharges. Objectives, instrumentation, and test plan are described. Results of continuing data evaluation will be included in the final report scheduled for publication later in 1977.

  2. Preliminary environmental analysis of a geopressured-geothermal test well in Brazoria County, Texas

    Energy Technology Data Exchange (ETDEWEB)

    White, W.A.; McGraw, M.; Gustavson, T.C.; Meriwether, J.

    1977-11-16

    Preliminary environmental data, including current land use, substrate lithology, soils, natural hazards, water resources, biological assemblages, meteorological data, and regulatory considerations have been collected and analyzed for approximately 150 km/sup 2/ of land near Chocolate Bayou, Brazoria County, Texas, in which a geopressured-geothermal test well is to be drilled in the fall of 1977. The study was designed to establish an environmental data base and to determine, within spatial constraints set by subsurface reservoir conditions, environmentally suitable sites for the proposed well. Preliminary analyses of data revealed the eed for focusing on the following areas: potential for subsidence and fault activation, susceptibility of test well and support facilities to fresh- and salt-water flooding, possible effects of produced saline waters on biological assemblages and groundwaer resources, distribution of expansive soils, and effect of drilling and associated support activities on known archeological-cultural resources.

  3. Test for Nonlinear Input Output Relations in SISO Systems by Preliminary Data Analysis

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...... are developed. They are much more robust, especially the sinus method which is reliable also for colored, heavy tailed or skew distributed noise....

  4. Children’s Foreign Language Anxiety Scale: Preliminary Tests of Reliability and Validity

    OpenAIRE

    Aydın, Selami; Harputlu, Leyla; Güzel, Serhat; Uştuk, Özgehan; Savran Çelik, Şeyda; Genç, Deniz

    2016-01-01

    Foreign language anxiety (FLA), which constitutes a serious problem in the foreign language learning process, has been mainly seen as a research issue regarding adult language learners, while it has been overlooked in children. This is because there is a lack of appropriate tools to measure FLA among children, whereas there are many studies on the scales that aim to measure anxiety levels among adult learners. Thus, the current study aims to conduct the preliminary tests of reliability and va...

  5. The 10x5 metre shuttle run test may be a good predictor of aerobic performance in pre-pubertal children

    DEFF Research Database (Denmark)

    Christiansen, Christina; Petersen, Mette; Froberg, Karsten

    in two field tests, the short shuttle run test (SSRT), 10x5 m measuring agility and speed , and the long modified 20 metre shuttle run, the Andersen test (AT) measuring cardio-respiratory fitness (4), representing anaerob and aerob performance respectively. Methods: The population and data was collected....... Conclusion: The SSRT may provide scientists, teachers and health care professionals with an important tool to estimate physical fitness in children in an easy, non-expensive, fast and fun way in the future. References: 1. Andersen LB, et Al. Secular trends in physical fitness in Danish adol.. Scand J Med Sci...

  6. Beam Dynamics for the Preliminary Phase of the New CLIC Test Facility (CTF3)

    CERN Document Server

    Corsini, R; Rinolfi, Louis; Risselada, Thys; Royer, P; Tecker, F A

    2001-01-01

    In the framework of the CLIC (Compact Linear Collider) RF power source studies, the scheme of electron pulse compression and bunch frequency mulitiplication, using injection by RF deflectors into an isochronous ring, will be tested, at low charge, during the preliminary phase of the new CLIC Test Facility (CTF3) at CERN. In this paper, we describe the beam dynamics studies made in order to assess the feasibility of the bunch combination experiment, as well as the related beam measurements performed on the LEP Pre-Injector complex (LPI) before its transformation into CTF3

  7. Blade system design studies volume II : preliminary blade designs and recommended test matrix.

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Dayton A. (Global Energy Concepts, LLC, Kirkland, WA)

    2004-06-01

    As part of the U.S. Department of Energy's Wind Partnerships for Advanced Component Technologies (WindPACT) program, Global Energy Concepts, LLC is performing a Blade System Design Study (BSDS) concerning innovations in materials, processes and structural configurations for application to wind turbine blades in the multi-megawatt range. The BSDS Volume I project report addresses issues and constraints identified to scaling conventional blade designs to the megawatt size range, and evaluated candidate materials, manufacturing and design innovations for overcoming and improving large blade economics. The current report (Volume II), presents additional discussion of materials and manufacturing issues for large blades, including a summary of current trends in commercial blade manufacturing. Specifications are then developed to guide the preliminary design of MW-scale blades. Using preliminary design calculations for a 3.0 MW blade, parametric analyses are performed to quantify the potential benefits in stiffness and decreased gravity loading by replacement of a baseline fiberglass spar with carbon-fiberglass hybrid material. Complete preliminary designs are then presented for 3.0 MW and 5.0 MW blades that incorporate fiberglass-to-carbon transitions at mid-span. Based on analysis of these designs, technical issues are identified and discussed. Finally, recommendations are made for composites testing under Part I1 of the BSDS, and the initial planned test matrix for that program is presented.

  8. Characteristics, finite element analysis, test description, and preliminary test results of the STM4-120 kinematic Stirling engine

    Science.gov (United States)

    Linker, K. L.; Rawlinson, K. S.; Smith, G.

    1991-10-01

    The Department of Energy's Solar Thermal Program has, as one of its program elements, the development and evaluation of conversion device technologies applicable to dish-electric systems. The primary research and development combines a conversion device (heat engine), solar receiver, and generator mounted at the focus of a parabolic dish concentrator. The Stirling-cycle heat engine was identified as the conversion device for dish-electric with the most potential for meeting the program's goals for efficiency, reliability, and installed cost. To advance the technology toward commercialization, Sandia National Laboratories has acquired a Stirling Thermal Motors, Inc. kinematic Stirling engine, STM4-120, for evaluation. The engine is being bench-tested at Sandia's Engine Test Facility and will be combined later with a solar receiver for on-sun evaluation. This report presents the engine characteristics, finite element analyses of critical engine components, test system layout, instrumentation, and preliminary performance results from the bench test.

  9. Preliminary Test of Friction disk type turbine for S-CO{sub 2} cycle application

    Energy Technology Data Exchange (ETDEWEB)

    Baik, Seungjoon; Kim, Hyeon Tae; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of)

    2016-05-15

    Due to the relatively mild sodium-CO{sub 2} interaction, the S-CO{sub 2} Brayton cycle can reduce the accident consequence compared to the steam Rankine cycle. Also the S-CO{sub 2} power conversion cycle can achieve high efficiency for SFR core thermal condition. Moreover, the S-CO{sub 2} power cycle can reduce the total cycle footprint due to high density of the working fluid. However, the high pressure operating condition and low viscosity of the fluid cause difficulties in designing appropriate seals and multi-stage turbo machineries. To solve the problem for designing turbo machineries in a creative way, KAIST research team tested a friction disk type turbine concept for the S-CO{sub 2} cycle application. In this paper, the investigation of the Tesla turbine and preliminary test results with compressed air are covered. The KAIST research team investigated a friction disk type turbine, named as Tesla turbine, for the S-CO{sub 2} power cycle applications. Due to the robust design of the fiction disk type, the Tesla turbine technology can be utilized not only for S-CO{sub 2} turbo machinery but also for the multi-phase or sludge flow turbo machinery. The preliminary test of lab-scale Tesla turbine with compressed air was conducted. The high pressure vessel was manufactured for the S-CO{sub 2} operating condition. The test will be concentrated on the turbine efficiency measurement under various conditions and development of the design methodology.

  10. Preliminary Design of Large Scale Sodium Thermal-Hydraulic Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae Ho; Kim, Tae Joon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Lee, Jae Han; Jeong, Ji Young; Park, Su Ki; Han, Ji Woong; Yoo, Yong Hwan; Lee, Yong Bum [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    A large scale sodium thermal-hydraulic test facility is being designed for verification of the advanced design concept of the passive decay heat removal circuit (PDRC) in a medium- or large-sized pool-type SFR. In the test, its cooling capability during the long- and short-term periods after the reactor trip will be evaluated, and also the produced experimental data will be utilized for the assessment and verification of the safety and performance analysis codes. Starting with the preliminary design of the test facility this year using KALIMER-600 as a reference reactor, the basic and the detailed designs will be made through 2011-2012 based on the demonstration reactor which is intended to be constructed by 2028 according to a long-term national SFR development plan. The installation is scheduled to be completed by the end of 2013, and the main experiments will commence from 2015 after the startup test in 2014. This paper briefly introduces the preliminary design features which were produced as a first step to assess the appropriateness of the facility design methodology.

  11. A Preliminary Analysis of Reactor Performance Test (LOEP) for a Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeonil; Park, Su-Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The final phase of commissioning is reactor performance test, which is to prove the integrated performance and safety of the research reactor at full power with fuel loaded such as neutron power calibration, Control Absorber Rod/Second Shutdown Rod drop time, InC function test, Criticality, Rod worth, Core heat removal with natural mechanism, and so forth. The last test will be safety-related one to assure the result of the safety analysis of the research reactor is marginal enough to be sure about the nuclear safety by showing the reactor satisfies the acceptance criteria of the safety functions such as for reactivity control, maintenance of auxiliaries, reactor pool water inventory control, core heat removal, and confinement isolation. After all, the fuel integrity will be ensured by verifying there is no meaningful change in the radiation levels. To confirm the performance of safety equipment, loss of normal electric power (LOEP), possibly categorized as Anticipated Operational Occurrence (AOO), is selected as a key experiment to figure out how safe the research reactor is before turning over the research reactor to the owner. This paper presents a preliminary analysis of the reactor performance test (LOEP) for a research reactor. The results showed how different the transient between conservative estimate and best estimate will look. Preliminary analyses have shown all probable thermal-hydraulic transient behavior of importance as to opening of flap valve, minimum critical heat flux ratio, the change of flow direction, and important values of thermal-hydraulic parameters.

  12. Influência da aptidão aeróbia no running anaerobic sprint test (RAST

    Directory of Open Access Journals (Sweden)

    Vitor Luiz de Andrade

    2013-09-01

    Full Text Available O objetivo do estudo foi verificar a possível influência de diferentes níveis de aptidão aeróbia (VO2MAX sobre os parâmetros do running anaerobic sprint test (RAST. Para isso, 38 indivíduos (Idade = 18,1±2,5 anos, Estatura = 173±1 cm e Massa corporal = 65,1±6,5 kg foram classificados em dois grupos, baixa e elevada aptidão aeróbias (GBA: n=22 e GEA: n=16. O VO2MAX foi determinado por um esforço incremental em esteira rolante até a exaustão voluntária. O RAST foi composto de seis esforços máximos de 35m separados por 10s de intervalo passivo. O VO2MAX foi significativamente diferente entre os grupos (GBA = 51,7±1,9 mL.kg-1.min-1; GEA = 58,6±3,1 mL.kg-1.min-1. A potência média (PM foi significativamente superior no grupo GBA (552,7±132,1 W em relação ao grupo GEA (463,6±132,8 W. O impulso (ImP foi significativamente correlacionado com o VO2MAX no GEA. Pode-se concluir que há um indicativo que o metabolismo aeróbio exerce uma influência na realização do RAST.

  13. Strategies for Maximizing Successful Drug Substance Technology Transfer Using Engineering, Shake-Down, and Wet Test Runs.

    Science.gov (United States)

    Abraham, Sushil; Bain, David; Bowers, John; Larivee, Victor; Leira, Francisco; Xie, Jasmina

    2015-01-01

    The technology transfer of biological products is a complex process requiring control of multiple unit operations and parameters to ensure product quality and process performance. To achieve product commercialization, the technology transfer sending unit must successfully transfer knowledge about both the product and the process to the receiving unit. A key strategy for maximizing successful scale-up and transfer efforts is the effective use of engineering and shake-down runs to confirm operational performance and product quality prior to embarking on good manufacturing practice runs such as process performance qualification runs. We consider key factors to consider in making the decision to perform shake-down or engineering runs. We also present industry benchmarking results of how engineering runs are used in drug substance technology transfers alongside the main themes and best practices that have emerged. Our goal is to provide companies with a framework for ensuring the "right first time" technology transfers with effective deployment of resources within increasingly aggressive timeline constraints.

  14. Preliminary test of the prototype modular cryostat for a 10 MW offshore superconducting wind turbine

    Science.gov (United States)

    Sun, Jiuce; Ramalingam, R.; Sanz, Santiago; Neumann, Holger

    2017-02-01

    The SUPerconducting Reliable lightweight And more POWERful offshore wind turbine (SUPRAPOWER), an EU FP7 funded research project, are under development for an innovative superconducting 10 MW class offshore wind turbine. Due to the requirements of handling, maintenance, reliability of long term and offshore operation, the cryostats are divided in two major parts: the modular cryostat able to accommodate a single coil and a thermal collector that links all the modules. The prototype modular cryostat was designed, manufactured and assembled in Karlsruhe Institute of Technology (KIT). The paper reports preliminary test results of proto-type modular cryostat with a two-stage Gifford-McMahon (GM) cryocooler.

  15. Nonlinear Analysis and Preliminary Testing Results of a Hybrid Wing Body Center Section Test Article

    Science.gov (United States)

    Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.; Wu, Hsi-Yung T.

    2015-01-01

    A large test article was recently designed, analyzed, fabricated, and successfully tested up to the representative design ultimate loads to demonstrate that stiffened composite panels with through-the-thickness reinforcement are a viable option for the next generation large transport category aircraft, including non-conventional configurations such as the hybrid wing body. This paper focuses on finite element analysis and test data correlation of the hybrid wing body center section test article under mechanical, pressure and combined load conditions. Good agreement between predictive nonlinear finite element analysis and test data is found. Results indicate that a geometrically nonlinear analysis is needed to accurately capture the behavior of the non-circular pressurized and highly-stressed structure when the design approach permits local buckling.

  16. Crack path for run-out specimens in fatigue tests: is it belonging to high- or very-high-cycle fatigue regime?

    Directory of Open Access Journals (Sweden)

    A. Shanyavskiy

    2015-10-01

    Full Text Available Fatigue tests run-out specimens up to 106 – 5x107 load cycles are used to determine the stress level named “fatigue limit”. Nevertheless, it is not clear what kind of fatigue cracking takes or will take place in these specimens. To discuss this problem, fatigue tests of titanium alloy VT3-1 specimens have been performed under tension with different values of R-ratio and under rotating-bending after various thermo-mechanical treatments (tempering, surface hardening and their combinations. Well-known S-N curves in High-Cycle- Fatigue regime have been plotted with run-out specimens usually used for “fatigue limit” determination. Then, after fatigue tests, run-out specimens have been tensed up to their failure, and fracture surface analyses have been performed for all tested specimens. It is found that run-out specimens in all combinations of treatments, for different R-ratio, have fracture surfaces for crack path in Very-High-Cycle-Fatigue regime. Based on this result, all S-N curves have been reconstructed in duplex curves for High- and Very-High-Cycle-Fatigue regime without using knowledge about “fatigue limit”. Detailed fracture surfaces analyses have been developed, and crack paths have been compared for various combinations of materials and surface states.

  17. Potential of preliminary test methods to predict biodegradation performance of petroleum hydrocarbons in soil.

    Science.gov (United States)

    Aichberger, H; Hasinger, Marion; Braun, Rudolf; Loibner, Andreas P

    2005-03-01

    Preliminary tests at different scales such as degradation experiments (laboratory) in shaking flasks, soil columns and lysimeters as well as in situ respiration tests (field) were performed with soil from two hydrocarbon contaminated sites. Tests have been evaluated in terms of their potential to provide information on feasibility, degradation rates and residual concentration of bioremediation in the vadose zone. Sample size, costs and duration increased with experimental scale in the order shaking flasks - soil columns - lysimeter - in situ respiration tests, only time demand of respiration tests was relatively low. First-order rate constants observed in degradation experiments exhibited significant differences between both, different experimental sizes and different soils. Rates were in line with type and history of contamination at the sites, but somewhat overestimated field rates particularly in small scale experiments. All laboratory experiments allowed an estimation of residual concentrations after remediation. In situ respiration tests were found to be an appropriate pre-testing and monitoring tool for bioventing although residual concentrations cannot be predicted from in situ respiration tests. Moreover, this method does not account for potential limitations that might hamper biodegradation in the longer term but only reflects the actual degradation potential when the test is performed.

  18. Turkish children's Bender-Gestalt Test performance: a pilot study and preliminary norms.

    Science.gov (United States)

    Ozer, Serap

    2007-12-01

    The present study was undertaken to provide preliminary data for norms on the Bender-Gestalt Test for 253 children ages 5 yr., 5 mo. to 11 yr., 10 mo. in Turkey. The Koppitz Developmental Scoring System gave mean error scores of 4.2 (SD = 3.3) for girls and 3.6 (SD = 3.0) for boys. The mean error scores obtained by all age groups are presented and compared with other cross-cultural data. These scores decreased across age groups, supporting Bender's maturational hypothesis of the test. The present sample performed at a higher developmental level than the Koppitz normative sample for the 5- and 6-year age groups, while means for other age groups were similar to the original U.S. norms. That this pattern is supported in other cross-cultural studies is discussed as well as the importance of developing local norms for visual spatial tests.

  19. Preliminary optical design of an Active Optics test bench for space applications.

    Science.gov (United States)

    Calcines, A.; Bitenc, U.; Rolt, S.; Reeves, S.; Doelman, N.; Human, J.; Morris, T.; Myers, R.; Talbot, G.

    2017-03-01

    This communication presents a preliminary optical design for a test bench conceived within the European Space Agency's TRP project (Active Optics Correction Chain (AOCC) for large monolithic mirrors) with the goal of designing and developing an Active Optics system able to correct in space on telescopes apertures larger than 3 meters. The test bench design uses two deformable mirrors of 37.5 mm and 116 mm, the smallest mirror to generate aberrations and the largest one to correct them. The system is configured as a multi-functional test bench capable of verifying the performance of a Shack-Hartmann wavefront sensor as well as of a Phase Diversity based wavefront sensor. A third optical path leads to a high-order Shack-Hartmann wavefront sensor to monitor the entire system performance.

  20. The NASA Juncture Flow Experiment: Goals, Progress, and Preliminary Testing (Invited)

    Science.gov (United States)

    Rumsey, Christopher L.; Neuhart, Danny H.; Kegerise, Michael A.

    2016-01-01

    NASA has been working toward designing and conducting a juncture flow experiment on a wing-body aircraft configuration. The experiment is planned to provide validation-quality data for CFD that focuses on the onset and progression of a separation bubble near the wing-body juncture trailing edge region. This paper describes the goals and purpose of the experiment. Although currently considered unreliable, preliminary CFD analyses of several different configurations are shown. These configurations have been subsequently tested in a series of "risk-reduction" wind tunnel tests, in order to help down-select to a final configuration that will attain the desired flow behavior. The risk-reduction testing at the higher Reynolds number has not yet been completed (at the time of this writing), but some results from one of the low-Reynolds-number experiments are shown.

  1. Diagnostic values of combination of free running asthma screening test and total serum allergen IgE level in children with asthma

    Institute of Scientific and Technical Information of China (English)

    Chen Xin; Li Yong; Zeng Meiying

    2014-01-01

    Background A free running asthma screening test is usually used for screening exercise-induced bronchoconstriction.The total serum allergen IgE level can reveal the patient's atopy characteristics.Our study is to evaluate the diagnostic values of the combination of the two tests in asthmatic children and compare this new diagnostic method with the Intemational Study of Asthma and Allergies in Childhood (ISSAC) questionnaires and the bronchial provocation test,which are popular diagnostic tool for pediatric asthma.Methods A total of 773 school children were recruited in this study.The children's asthma was diagnosed by means of a combination of the free running asthma screening test and total serum allergen IgE level.The new diagnostic method value was assessed using receiver operating characteristic (ROC) curves and compared with other diagnostic tools such as ISSAC questionnaires and the bronchial provocation test.Results The AUC of this new diagnostic method was higher than 0.9.When the cut-off value of total serum allergen IgE level was ≥47 KU/L,the sensitivity and the specificity were 71.4% and 85.1%,respectively,which were better than those of either the ISSAC questionnaires or bronchial provocation test.Conclusion The combination of the free running asthma screening test and total serum allergen IgE level may be an effective diagnostic tool for children's asthma.

  2. Preliminary Design Report of Fluid System of PDRC Performance Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae-Ho; Eoh, Jae-Hyuk; Seong, Seung-Hwan; Han, Ji-Woong; Choi, Byoung-Hae; Kim, Seong-O

    2008-10-15

    PDRC (Passive Decay Heat Removal Circuit) is a safety grade passive residual heat removal system of KALIMER-600. In order to assess the long- and short-term cooling capabilities of PDRC and produce the experimental data for the verification of the performance and safety analysis codes, PDRC performance test was planned for. In this study, the overall design requirements and the preliminary design data for the fluid system of test facility are presented. The fluid system of the facility is composed of the primary heat transport system, the PDRC, the IHX air cooling system and the sodium supply/purification system. The preliminarily designed facility is scaled-down to 1/4 for length, 1/400 for volume from the primary heat transport system and the PDRC of KALIMER-600 based on a reliable scaling method. It can simulate the cooling of primary heat transport system for the full temperature condition in case of the reactor and pump trips. The produced preliminary design data will be used in the future as the basic information for a detailed design, an establishment of experimental requirement and an assessment of the appropriateness of facility design.

  3. Running Linux

    CERN Document Server

    Dalheimer, Matthias Kalle

    2006-01-01

    The fifth edition of Running Linux is greatly expanded, reflecting the maturity of the operating system and the teeming wealth of software available for it. Hot consumer topics such as audio and video playback applications, groupware functionality, and spam filtering are covered, along with the basics in configuration and management that always made the book popular.

  4. RUN COORDINATION

    CERN Multimedia

    C. Delaere

    2013-01-01

    Since the LHC ceased operations in February, a lot has been going on at Point 5, and Run Coordination continues to monitor closely the advance of maintenance and upgrade activities. In the last months, the Pixel detector was extracted and is now stored in the pixel lab in SX5; the beam pipe has been removed and ME1/1 removal has started. We regained access to the vactank and some work on the RBX of HB has started. Since mid-June, electricity and cooling are back in S1 and S2, allowing us to turn equipment back on, at least during the day. 24/7 shifts are not foreseen in the next weeks, and safety tours are mandatory to keep equipment on overnight, but re-commissioning activities are slowly being resumed. Given the (slight) delays accumulated in LS1, it was decided to merge the two global runs initially foreseen into a single exercise during the week of 4 November 2013. The aim of the global run is to check that we can run (parts of) CMS after several months switched off, with the new VME PCs installed, th...

  5. Repo Runs

    NARCIS (Netherlands)

    Martin, A.; Skeie, D.; von Thadden, E.L.

    2010-01-01

    This paper develops a model of financial institutions that borrow short- term and invest into long-term marketable assets. Because these financial intermediaries perform maturity transformation, they are subject to runs. We endogenize the profits of the intermediary and derive distinct liquidity and

  6. The Cleveland Sorting Test: a preliminary study of an alternate form of the Wisconsin Card-Sorting Test.

    Science.gov (United States)

    Poreh, Amir; Pastel, Dan; Miller, Ashley; Levin, Jennifer

    2012-01-01

    During the past two decades, studies have repeatedly shown that the Wisconsin Card-Sorting Test (WCST) is not as sensitive to prefrontal-lobe functioning as was originally suspected. Specifically, both clinical and brain-imaging studies have shown that several distinct neural circuits contribute to one's ability to successfully complete different aspects of the test. Another limitation of the WCST is its length, which makes it difficult and frustrating for certain clinical populations. To address the above limitations, researchers have proposed the development of new indexes and the integration of an adaptive testing approach that will allow for the premature termination of the test. Unfortunately, given the proprietary nature of the WCST, none of the above recommendations have been adopted. The present preliminary study examined an alternate form of the 64-Item WCST (WCST-64), the Cleveland Sorting Test (CST-64). The normative data of the two measures as well as the total number of errors, perseverative responses, perseverative errors, and categories completed were compared using a repeated-measures design. Overall, the study supports psychometric approximation of the CST-64 and the WCST-64. Suggestions for future studies and modifications of the CST-64, including the use of recently proposed indexes and adaptive administration approaches, are provided.

  7. In vitro preliminary cytotoxicity testing of vegetal extracts, using colorimetric methods

    Directory of Open Access Journals (Sweden)

    Claudia Patricia Cordero Camacho

    2011-12-01

    Full Text Available To advance in the study of the Colombian vegetal biodiversity, considered as a potential source of pharmacologically active products, the establishment of biological activity evaluation systems is necessary, which allow the detection of active products against pathologies with high social and economical impact, such as cancer. This work describes the implementation of a preliminary in vitro methodology for the determination of potential anticancer activity in vegetal extracts, by cytotoxicity testing upon human tumor cell lines, measuring the cellular mass indirectly with the colorimetric assays of MTT (methyl tetrazolium tiazole reduction and SRB (sulforhodamine Bstaining. HT-29, MCF-7, SiHa and HEp-2 cell lines cultures were adapted, MTT concentration, cellular density and treatment period parameters for the cytotoxicity assay were selected. Cell lines sensitivity to the chemotherapeutic agent Doxorubicin HCl was determined. Colombian vegetal species extracts cytotoxicity was tested and usefulness of the assay as a tool to bioguide the search of active products was evidenced.

  8. Preliminary Results of a U.S. Deep South Modeling Experiment Using NASA SPoRT Initialization Datasets for Operational National Weather Service Local Model Runs

    Science.gov (United States)

    Wood, Lance; Medlin, Jeffrey M.; Case, Jon

    2012-01-01

    A joint collaborative modeling effort among the NWS offices in Mobile, AL, and Houston, TX, and NASA Short-term Prediction Research and Transition (SPoRT) Center began during the 2011-2012 cold season, and continued into the 2012 warm season. The focus was on two frequent U.S. Deep South forecast challenges: the initiation of deep convection during the warm season; and heavy precipitation during the cold season. We wanted to examine the impact of certain NASA produced products on the Weather Research and Forecasting Environmental Modeling System in improving the model representation of mesoscale boundaries such as the local sea-, bay- and land-breezes (which often leads to warm season convective initiation); and improving the model representation of slow moving, or quasi-stationary frontal boundaries (which focus cold season storm cell training and heavy precipitation). The NASA products were: the 4-km Land Information System, a 1-km sea surface temperature analysis, and a 4-km greenness vegetation fraction analysis. Similar domains were established over the southeast Texas and Alabama coastlines, each with an outer grid with a 9 km spacing and an inner nest with a 3 km grid spacing. The model was run at each NWS office once per day out to 24 hours from 0600 UTC, using the NCEP Global Forecast System for initial and boundary conditions. Control runs without the NASA products were made at the NASA SPoRT Center. The NCAR Model Evaluation Tools verification package was used to evaluate both the positive and negative impacts of the NASA products on the model forecasts. Select case studies will be presented to highlight the influence of the products.

  9. Extended testing of a general contextual classifier using the massively parallel processor - Preliminary results and test plans. [for thematic mapping

    Science.gov (United States)

    Tilton, J. C.

    1985-01-01

    Earlier encouraging test results of a contextual classifier that combines spatial and spectral information employing a general statistical approach are expanded. The earlier results were of limited meaning because they were produced from small (50-by-50 pixel) data sets. An implementation of the contextual classifier on NASA Goddard's Massively Parallel Processor (MPP) is presented; for the first time the MPP makes feasible the testing of the classifier on large data sets (a 12-hour test on a VAX-11/780 minicomputer now takes 5 minutes on the MPP). The MPP is a Single-Instruction, Multiple Data Stream computer, consisting of 16,384 bit serial microprocessors connected in a 128-by-128 mesh array with each element having data transfer connections with its four nearest neighbors so that the MPP is capable of billions of operations per second. Preliminary results are given (with more expected for the conference) and plans are mentioned for extended testing of the contextual classifier on Thematic Mapper data sets.

  10. Running Club

    CERN Multimedia

    Running Club

    2011-01-01

    The cross country running season has started well this autumn with two events: the traditional CERN Road Race organized by the Running Club, which took place on Tuesday 5th October, followed by the ‘Cross Interentreprises’, a team event at the Evaux Sports Center, which took place on Saturday 8th October. The participation at the CERN Road Race was slightly down on last year, with 65 runners, however the participants maintained the tradition of a competitive yet friendly atmosphere. An ample supply of refreshments before the prize giving was appreciated by all after the race. Many thanks to all the runners and volunteers who ensured another successful race. The results can be found here: https://espace.cern.ch/Running-Club/default.aspx CERN participated successfully at the cross interentreprises with very good results. The teams succeeded in obtaining 2nd and 6th place in the Mens category, and 2nd place in the Mixed category. Congratulations to all. See results here: http://www.c...

  11. RUN COORDINATION

    CERN Multimedia

    Christophe Delaere

    2013-01-01

    The focus of Run Coordination during LS1 is to monitor closely the advance of maintenance and upgrade activities, to smooth interactions between subsystems and to ensure that all are ready in time to resume operations in 2015 with a fully calibrated and understood detector. After electricity and cooling were restored to all equipment, at about the time of the last CMS week, recommissioning activities were resumed for all subsystems. On 7 October, DCS shifts began 24/7 to allow subsystems to remain on to facilitate operations. That culminated with the Global Run in November (GriN), which   took place as scheduled during the week of 4 November. The GriN has been the first centrally managed operation since the beginning of LS1, and involved all subdetectors but the Pixel Tracker presently in a lab upstairs. All nights were therefore dedicated to long stable runs with as many subdetectors as possible. Among the many achievements in that week, three items may be highlighted. First, the Strip...

  12. Validating a dance-specific screening test for balance: preliminary results from multisite testing.

    Science.gov (United States)

    Batson, Glenna

    2010-09-01

    Few dance-specific screening tools adequately capture balance. The aim of this study was to administer and modify the Star Excursion Balance Test (oSEBT) to examine its utility as a balance screen for dancers. The oSEBT involves standing on one leg while lightly targeting with the opposite foot to the farthest distance along eight spokes of a star-shaped grid. This task simulates dance in the spatial pattern and movement quality of the gesturing limb. The oSEBT was validated for distance on athletes with history of ankle sprain. Thirty-three dancers (age 20.1 +/- 1.4 yrs) participated from two contemporary dance conservatories (UK and US), with or without a history of lower extremity injury. Dancers were verbally instructed (without physical demonstration) to execute the oSEBT and four modifications (mSEBT): timed (speed), timed with cognitive interference (answering questions aloud), and sensory disadvantaging (foam mat). Stepping strategies were tracked and performance strategies video-recorded. Unlike the oSEBT results, distances reached were not significant statistically (p = 0.05) or descriptively (i.e., shorter) for either group. Performance styles varied widely, despite sample homogeneity and instructions to control for strategy. Descriptive analysis of mSEBT showed an increased number of near-falls and decreased timing on the injured limb. Dancers appeared to employ variable strategies to keep balance during this test. Quantitative analysis is warranted to define balance strategies for further validation of SEBT modifications to determine its utility as a balance screening tool.

  13. Preliminary study fo the interference of proteic compounds of radiopharmaceuticals in the test of lisadode amebocitos de limulus (LAL)

    CERN Document Server

    Aldana, C

    1997-01-01

    In this thesis the objective was evaluate the interference of proteic compounds of the radiopharmaceuticals in the test LAL (lisado of amebocitos de limulus) for this, macroagregates of albumina (MAA) was used with metilendifosfonato (MDP) as control that is the radiopharmaceutical more used in the nuclear medicine centers of the country. Initially preliminary test were carried out to assess if some of two radiopharmaceuticals would cause interference with LAL test, after the test was validated and finally routine tests were made. With the preliminary assays was concluded that proteic compounds did not cause interference (albumina with a concentration of 2 md/dl) with the MAA. However with the MDP cause interference with LAL test. The interference was eliminated with a dilution of 1:8 of the sample. Was concluded that the success of LAL test depends on conditions such as temperature, pH, constant incubation (no minimum variations) and that is a good test for quality control of the radiopharmaceuticals.

  14. Running Test and Optimization of Bamboo OSB Medium Experimental Line%竹质OSB中试线的运行试验及优化

    Institute of Scientific and Technical Information of China (English)

    傅万四; 周建波

    2012-01-01

    Bamboo OSB ( BOSB) medium experimental line and key equipments are presented for the first time based on the analysis of BOSB production technologies and processes requirements. Component of BOSB medium experimental line and key equipments stated. The paper illustrated BOSB flaker, glue blender, orienting former. Then medium experimental line is given to a great deal of test run and optimization. The tests indicated that the medium experimental line operated smoothly for producing BOSB. Tested BOSB key performance indicators were higher than the LY/T 1580-2000 (OSB/4).

  15. Preliminary piping layout and integration of European test blanket modules subsystems in ITER CVCS area

    Energy Technology Data Exchange (ETDEWEB)

    Tarallo, Andrea, E-mail: andrea.tarallo@unina.it [CREATE, University of Naples Federico II, DII, P.le Tecchio, 80, 80125 Naples (Italy); Mozzillo, Rocco; Di Gironimo, Giuseppe [CREATE, University of Naples Federico II, DII, P.le Tecchio, 80, 80125 Naples (Italy); Aiello, Antonio; Utili, Marco [ENEA UTIS, C.R. Brasimone, Bacino del Brasimone, I-40032 Camugnano, BO (Italy); Ricapito, Italo [TBM& MD Project, Fusion for Energy, EU Commission, Carrer J. Pla, 2, Building B3, 08019 Barcelona (Spain)

    2015-04-15

    Highlights: • The use of human modeling tools for piping design in view of maintenance is discussed. • A possible preliminary layout for TBM subsystems in CVCS area has been designed with CATIA. • A DHM-based method to quickly check for maintainability of piping systems is suggested. - Abstract: This paper explores a possible integration of some ancillary systems of helium-cooled lithium lead (HCLL) and helium-cooled pebble-bed (HCPB) test blanket modules in ITER CVCS area. Computer-aided design and ergonomics simulation tools have been fundamental not only to define suitable routes for pipes, but also to quickly check for maintainability of equipment and in-line components. In particular, accessibility of equipment and systems has been investigated from the very first stages of the design using digital human models. In some cases, the digital simulations have resulted in changes in the initial space reservations.

  16. Preliminary safety evaluation (PSE) for Sodium Storage Facility at the Fast Flux Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Bowman, B.R.

    1994-09-30

    This evaluation was performed for the Sodium Storage Facility (SSF) which will be constructed at the Fast Flux Test Facility (FFTF) in the area adjacent to the South and West Dump Heat Exchanger (DHX) pits. The purpose of the facility is to allow unloading the sodium from the FFTF plant tanks and piping. The significant conclusion of this Preliminary Safety Evaluation (PSE) is that the only Safety Class 2 components are the four sodium storage tanks and their foundations. The building, because of its imminent risk to the tanks under an earthquake or high winds, will be Safety Class 3/2, which means the building has a Safety Class 3 function with the Safety Class 2 loads of seismic and wind factored into the design.

  17. The preliminary tests of the superconducting electron cyclotron resonance ion source DECRIS-SC2.

    Science.gov (United States)

    Efremov, A; Bekhterev, V; Bogomolov, S; Drobin, V; Loginov, V; Lebedev, A; Yazvitsky, N; Yakovlev, B

    2012-02-01

    A new compact version of the "liquid He-free" superconducting ECR ion source, to be used as an injector of highly charged heavy ions for the MC-400 cyclotron, is designed and built at the Flerov Laboratory of Nuclear Reactions in collaboration with the Laboratory of High Energy Physics of JINR. The axial magnetic field of the source is created by the superconducting magnet and the NdFeB hexapole is used for the radial plasma confinement. The microwave frequency of 14 GHz is used for ECR plasma heating. During the first tests, the source shows a good enough performance for the production of medium charge state ions. In this paper, we will present the design parameters and the preliminary results with gaseous ions.

  18. Test plan for preliminary study of inorganic contaminant removal from RMA groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, D.; Terkonda, P.; Weeks, N.

    1978-02-01

    This document consists of a major report on inorganic contaminant removal from ground water. In this plan, WES has been requested by the OPM-CDIR to conduct a literature review and preliminary laboratory treatability studies on various source waters at RMA. Recommendation is that the determination of suitable treatment processes be based on both engineering and economic analysis and that the processes be compatible with the organic contaminant treatment processes under study (activated carbon adsorption and ultraviolet/ozone oxidation). The amendment to the test plan presents the inorganic treatment processes found from the literature to be applicable to the inorganic contaminants in RMA ground water and outlines the bench scale study to be conducted at WES using the potential processes. The rest of the document is correspondence and reports on various water treatability.

  19. Developing the Psychological Strain Scales (PSS): Reliability, Validity, and Preliminary Hypothesis Tests.

    Science.gov (United States)

    Zhang, Jie; Lu, Juncheng; Zhao, Sibo; Lamis, Dorian A; Li, Ning; Kong, Yuanyuan; Jia, Cunxian; Zhou, Li; Ma, Zhenyu

    2014-01-01

    Since its inception, the Strain Theory of Suicide has been tested and supported in a number of empirical studies. This social psychological theory can be employed as a complementary conceptualization to account for suicidal behaviors as well as mental disorders. However, the lack of consistent measurements of the strains limits the application of the theory in scientific research. Our research team has developed such scales for future testing of the Strain Theory of Suicide in a more systematic approach. For the initial items to measure the four strains (value, aspiration, deprivation, and coping), we solicited approximately 40 items for each strain with high face validity by about 30 fellow researchers. A preliminary examination of about 160 items for consistency and validity, with a sample of about 300 college students, yielded 20 consistent items for each of the four strain scales. Then, a second study was conducted at a different university with approximately 500 students to further streamline each of the four strain scales and test the validity of each with corresponding established scales and variables. As a result, 15 items were selected for each of the four Psychological Strain Scales (PSS). In correlation and multiple regression analyses, we found support for the hypotheses regarding the positive associations between psychological strains measured by the PSS and psychopathology including suicidal ideation. Follow up research with the new scales needs to be carried out in order to test the effects of psychological strains on suicide and mental disorders for various populations.

  20. The ATLAS RunTimeTester

    CERN Document Server

    The ATLAS collaboration

    2016-01-01

    The ATLAS RunTimeTester is a job based software test system. The RunTimeTester runs jobs, and optional tests on the job outputs. Job and test results are reported via a web site. The system currently runs $\\approx$ 8000 jobs daily, and the web site receives $\\approx$ 25K hits a week. This note provides an overview of the system.

  1. Sugarcane straw harvest effects on soil quality and plant growth: preliminary data synthesis of a multi-local project running in Brazil

    Science.gov (United States)

    Cherubin, Maurício; Cerri, Carlos E. P.; Feigl, Brigitte J.; Cerri, Carlos C.

    2017-04-01

    Brazil is the largest sugarcane producer in the world, and consequently, it is one of major players in the bioenergy production sector. Despite that, growing demands for bioenergies have raised the interest of Brazilian sugarcane industry to harvest the sugarcane straw left on the field for cellulosic ethanol production and/or bioelectricity cogeneration. However, crop residues have a key role in the soil, affecting directly or indirectly multiple soil functions and related ecosystem services. Therefore, indiscriminate straw harvest could jeopardize soil quality, decreasing its capacity to sustain plant productivity over time. In order to evaluate the potential impacts of sugarcane straw harvest on soil quality and plant growth, we are conducting since 2014 a multi-local project across central-southern Brazil, the main core of sugarcane production in the world. A wide range of soil chemical, physical and biological parameters, as well as, plant biomass production has been quantified under increasing straw harvest intensities. Our preliminary findings have showed that short-term straw harvest management did not affect total organic C stocks; however, high straw harvest led to significant reduction in labile C forms (e.g., microbial biomass C and N), and abundance of microbial communities as well. Sugarcane straw harvest affects soil nutrient cycling, since significant amount of nutrients are removed annually by straw, especially in top (green) leaves. In addition, our data show that straw acts as a thermal insulator, decreasing soil temperature amplitude and keeping soil moisture for a longer time. Straw harvest management did not affect sugarcane yields in the first two crop seasons. Based on this first synthesis of the project, we conclude that short-term sugarcane straw harvest led to soil changes, especially in more sensitive and dynamic properties, which did not affect the plant yield. However, long-term impacts should be monitored towards a better

  2. Preliminary Beam Tests at REX for an Automatic Cavity Phasing Routine at HIE-ISOLDE

    CERN Document Server

    Fraser, M A; Broere, J; Lanaia, D; Valuch, D

    2013-01-01

    The HIE upgrade at ISOLDE will use 32 independently phased superconducting quarterwave cavities, which will impose new demands on the operation and set-up of the linac. The large range of different radioactive species and the broad experimental programme means that the same beam species and energy are rarely studied twice, and the accelerator must be re-tuned for each experimental run. In order to expedite machine set-up it is foreseen to calculate and set automatically the cavity phases when the operator inputs the desired beam energy and A/q of the beam species. In this note we explore our understanding of the REX rf system and test our beam dynamics calculations with two independently phased 7-gap split-ring cavities.

  3. Clinical evaluation of children testing positive in screening tests for attention-deficit/hyperactivity disorder: A preliminary report

    Directory of Open Access Journals (Sweden)

    Maria Skounti

    2009-06-01

    Full Text Available Background and Objectives: Screening tests are of great diagnostic value in attention-deficit/hyperactivity disorder (ADHD, however final diagnosis relies on a clinical examination by an expert. The objective of the present study was to clinically evaluate children who had been screened positive for ADHD through both a parent and a teacher questionnaire. Methods: Parent interview and child behavior checklist and clinical assessment were used to confirm the preliminary diagnosis in 42 children aged 8 years, who have been screened positive for ADHD out of 1,708 children, in a large, two-setting screening study conducted in Crete, Greece. Results: The diagnosis of ADHD was confirmed for 31 children (74%. In the remaining 11 children, ADHD manifestations were attributed to other primary disorders. None of the 42 children was classified as lacking symptoms suggesting ADHD. Among the 31 children with confirmed ADHD, only 2 had been diagnosed prior to the screening test. Conclusions: Although clinical evaluation is the golden standard for diagnosis of ADHD, two-setting screening questionnaires by parent and teacher are useful tools in identifying children who need further investigation and intervention.

  4. Cross-cultural effects on IQ test performance: a review and preliminary normative indications on WAIS-III test performance.

    Science.gov (United States)

    Shuttleworth-Edwards, Ann B; Kemp, Ryan D; Rust, Annegret L; Muirhead, Joanne G L; Hartman, Nigel P; Radloff, Sarah E

    2004-10-01

    This article presents a review of cross-cultural influences on Wechsler IQ tests, together with a preliminary investigation into WAIS-III test performance (English administration) for a southern African sample (age range 19-30) stratified for white English first language and black African first language, level and quality of education. ('African language' is the term used to denote the indigenous languages of black populations in southern Africa). A two-way ANOVA revealed highly significant effects for both level and quality of education within the black African first language group. Scores for the white English and black African first language groups with advantaged education were comparable with the US standardization, whereas scores for black African first language participants with disadvantaged education were significantly lower than this. Thus indications from this research are that normative studies should take account of the influential variable of quality of education, in addition to level of education. Alternatively faulty conclusions may be drawn about the effects of ethnicity, with the potential for neuropsychological misdiagnosis.

  5. RUN COORDINATION

    CERN Multimedia

    G. Rakness.

    2013-01-01

    After three years of running, in February 2013 the era of sub-10-TeV LHC collisions drew to an end. Recall, the 2012 run had been extended by about three months to achieve the full complement of high-energy and heavy-ion physics goals prior to the start of Long Shutdown 1 (LS1), which is now underway. The LHC performance during these exciting years was excellent, delivering a total of 23.3 fb–1 of proton-proton collisions at a centre-of-mass energy of 8 TeV, 6.2 fb–1 at 7 TeV, and 5.5 pb–1 at 2.76 TeV. They also delivered 170 μb–1 lead-lead collisions at 2.76 TeV/nucleon and 32 nb–1 proton-lead collisions at 5 TeV/nucleon. During these years the CMS operations teams and shift crews made tremendous strides to commission the detector, repeatedly stepping up to meet the challenges at every increase of instantaneous luminosity and energy. Although it does not fully cover the achievements of the teams, a way to quantify their success is the fact that that...

  6. Comparative analysis of the 1-mile run test evaluation formulae: Assessment of aerobic capacity in male law enforcement officers aged 20–23 years

    Directory of Open Access Journals (Sweden)

    Gürhan Kayihan

    2014-04-01

    Full Text Available Objectives: The purpose of this study was to compare values of aerobic performance in the 1-mile run test (1-MRT using different formulae. Material and Methods: Aerobic capacities of 351 male volunteers working for the Turkish National Police within the age range of 20-23 years were evaluated by the 1-MRT and the 20-metre shuttle run (20-MST. VO2max values were estimated by the prediction equations developed by George et al. (1993, Cureton et al. (1995 and Kline et al. (1987 for the 1-MRT and by Leger and Lambert (1982 for the 20-MST. Results: The difference between the results of the different formulae was significant (p = 0.000. The correlation coefficient between the estimated VO2max using Cureton's equation, George's equation, Kline's equation and the 20-MST were 0.691 (p < 0.001, 0.486 (p < 0.001 and 0.608 (p < 0.001, respectively. The highest correlation coefficient was between the VO2max estimated by the 20-MST and Cureton's equation. Similarly, the highest correlation coefficient (r = -0.779 was between the 1-mile run time and the VO2max estimated by Cureton's equation. Conclusions: When analysing more vigorous exercise than sub-maximal exercise, we suggest that Cureton's equation be used to predict the VO2max from 1-mile run/walk performance in large numbers of healthy individuals with high VO2max. This research compares the use of 3 different formulae to estimate VO2max from 1-mile run/ walk performance in male law enforcement officers aged 20-23 years for the first time and reports the most accurate formula to use when evaluating aerobic capacities of large numbers of healthy individuals.

  7. Preliminary Tests Concerning Zero-Valent Iron Efficiency in Inorganic Pollutants Remediation

    Directory of Open Access Journals (Sweden)

    Silvia Fiore

    2009-01-01

    Full Text Available Problem statement: This study was aimed to a preliminary evaluation of the applicability of granular Zero-Valent Iron (ZVI to the on site remediation of groundwater polluted by inorganic contaminants by means of a Permeable Reactive Barrier (PRB. A particular interest was devoted to groundwater impacted by Acid Mine Drainage (AMD that was caused by the oxidation of metal sulphide minerals contained in mine wastes, especially iron disulphide pyrite. Although AMD consequences were particularly evident in surface waters, the percolation through mine wastes may heavily alter the groundwater quality, therefore is particularly important the development of a restrained cost remediation technique for groundwater polluted by AMDs. Approach: In this study the degradation efficiency of Brown size 8/50 ZVI (Peerless Powders and Abrasive Inc., Detroit, US was evaluated performing a leaching column test and analyzing the Oxidation Reduction Potential (ORP, metals, nitrates, chlorides and sulphates profiles along the column. Results: This test allowed simulating the solid-liquid contact characteristic of a real PRB behavior that proved to be a possible solution for the remediation of inorganic pollutants in groundwater. Conclusion: The considered material showed efficiency above 99% in metals removal, although further tests, involving biotic processes and more reducing conditions, are necessary to improve the degradation of sulphates and nitrates.

  8. Calculation of Sodium Fire Test-I (Run-E6) using sodium combustion analysis code ASSCOPS version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Nakagiri, Toshio; Ohno, Shuji; Miyake, Osamu [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1997-11-01

    The calculation of Sodium Fire Test-I (Run-E6) was performed using the ASSCOPS (Analysis of Simultaneous Sodium Combustions in Pool and Spray) code version 2.0 in order to determine the parameters used in the code for the calculations of sodium combustion behavior of small or medium scale sodium leak, and to validate the applicability of the code. The parameters used in the code were determined and the validation of the code was confirmed because calculated temperatures, calculated oxygen concentration and other calculated values almost agreed with the test results. (author)

  9. AGR-1 Irradiated Test Train Preliminary Inspection and Disassembly First Look

    Energy Technology Data Exchange (ETDEWEB)

    Paul Demkowicz; Lance Cole; Scott Ploger; Philip Winston; Binh Pham; Michael Abbott

    2011-01-01

    The AGR-1 irradiation experiment ended on November 6, 2009, after 620 effective full power days in the Advanced Test Reactor, achieving a peak burnup of 19.6% FIMA. The test train was shipped to the Materials and Fuels Complex in March 2010 for post-irradiation examination. The first PIE activities included non-destructive examination of the test train, followed by disassembly of the test train and individual capsules and detailed inspection of the capsule contents, including the fuel compacts and the graphite fuel holders. Dimensional measurements of the compacts, graphite holders, and steel capsules shells were performed using a custom vision measurement system (for outer diameters and lengths) and conventional bore gauges (for inner diameters). Gamma spectrometry of the intact test train gave a preliminary look at the condition of the interior components. No evidence of damage to compacts or graphite components was evident from the isotopic and gross gamma scans. Neutron radiography of the intact Capsule 2 showed a high degree of detail of interior components and confirmed the observation that there was no major damage to the capsule. Disassembly of the capsules was initiated using procedures qualified during out-of-cell mockup testing. Difficulties were encountered during capsule disassembly due to irradiation-induced changes in some of the capsule components’ properties, including embrittled niobium and molybdenum parts that were susceptible to fracture and swelling of the graphite fuel holders that affected their removal from the capsule shells. This required various improvised modifications to the disassembly procedure to avoid damage to the fuel compacts. Ultimately the capsule disassembly was successful and only one compact from Capsule 4 (out of 72 total in the test train) sustained damage during the disassembly process, along with the associated graphite holder. The compacts were generally in very good condition upon removal. Only relatively minor

  10. Preliminary test of an imaging probe for nuclear medicine using hybrid pixel detectors

    CERN Document Server

    Bertolucci, Ennio; Mettivier, G; Montesi, M C; Russo, P

    2002-01-01

    We are investigating the feasibility of an intraoperative imaging probe for lymphoscintigraphy with Tc-99m tracer, for sentinel node radioguided surgery, using the Medipix series of hybrid detectors coupled to a collimator. These detectors are pixelated semiconductor detectors bump-bonded to the Medipix1 photon counting read-out chip (64x64 pixel, 170 mu m pitch) or to the Medipix2 chip (256x256 pixel, 55 mu m pitch), developed by the European Medipix collaboration. The pixel detector we plan to use in the final version of the probe is a semi-insulating GaAs detector or a 1-2 mm thick CdZnTe detector. For the preliminary tests presented here, we used 300-mu m thick silicon detectors, hybridized via bump-bonding to the Medipix1 chip. We used a tungsten parallel-hole collimator (7 mm thick, matrix array of 64x64 100 mu m circular holes with 170 mu m pitch), and a 22, 60 and 122 keV point-like (1 mm diameter) radioactive sources, placed at various distances from the detector. These tests were conducted in order ...

  11. Design and preliminary test of precision segment positioning actuator for the California Extremely Large Telescope

    Science.gov (United States)

    Lorell, Kenneth R.; Aubrun, Jean-Noel; Clappier, Robert R.; Shelef, Ben; Shelef, Gad

    2003-01-01

    In order for the California Extremely Large Telescope (CELT) to achieve the required optical performance, each of its 1000 primary mirror segments must be positioned relative to adjacent segments with nanometer-level accuracy. This can be accomplished using three actuators for each segment to actively control the segment in tip, tilt, and piston. The Keck telescopes utilize a segmented primary mirror similar to CELT employing a highly successful actuator design. However, because of its size and the shear number of actuators (3000 vs. 108 for Keck), CELT will require a different design. Sensitivity to wind loads and structural vibrations, the large dynamic range, low operating power, and extremely reliable operation, all achieved at an affordable unit cost, are the most demanding design requirements. This paper examines four actuator concepts and presents a trade-off between them. The concept that best met the CELT requirements is described along with an analysis of its performance. The concept is based on techniques that achieve the required accuracy while providing a substantial amount of vibration attenuation and damping. A prototype actuator has been built to validate this concept. Preliminary tests confirm predicted behavior and future tests will establish a sound baseline for final design and production.

  12. Preliminary failure modes and effects analysis on Korean HCCR TBS to be tested in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Mu-Young, E-mail: myahn74@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of); Jin, Hyung Gon; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Yi-Hyun; Lee, Youngmin [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    Highlights: • Postulated initiating events are identified through failure modes and effects analysis on the current HCCR TBS design. • A set of postulated initiating events are selected for consideration of deterministic analysis. • Accident evolutions on the selected postualted initiating events are qualitatively described for deterministic analysis. - Abstract: Korean Helium cooled ceramic reflector (HCCR) Test blanket system (TBS), which comprises Test blanket module (TBM) and ancillary systems in various locations of ITER building, is operated at high temperature and pressure with decay heat. Therefore, safety is utmost concern in design process and it is required to demonstrate that the HCCR TBS is designed to comply with the safety requirements and guidelines of ITER. Due to complexity of the system with many interfaces with ITER, a systematic approach is necessary for safety analysis. This paper presents preliminary failure modes and effects analysis (FMEA) study performed for the HCCR TBS. FMEA is a systematic methodology in which failure modes for components in the system and their consequences are studied from the bottom-up. Over eighty failure modes have been investigated on the HCCR TBS. The failure modes that have similar consequences are grouped as postulated initiating events (PIEs) and total seven reference accident scenarios are derived from FMEA study for deterministic accident analysis. Failure modes not covered here due to evolving design of the HCCR TBS and uncertainty in maintenance procedures will be studied further in near future.

  13. New rapid test for prenatal detection of trisomy 21 (Down's syndrome): preliminary report.

    Science.gov (United States)

    Bryndorf, T.; Christensen, B.; Philip, J.; Hansen, W.; Yokobata, K.; Bui, N.; Gaiser, C.

    1992-01-01

    OBJECTIVE--To devise and evaluate a rapid screening method for detecting trisomy 21 (Down's syndrome) in samples of uncultured amniotic fluid cells. DESIGN--Non-radioactive in situ hybridisation with HY128, a 500,000 base pair yeast artificial chromosome probe specific for chromosome 21. Blinded study of 12 karyotypically normal amniotic fluid samples and eight samples trisomic for chromosome 21. SETTING--Cytogenetic and obstetric services at a tertiary referral centre, Copenhagen. MAIN OUTCOME MEASURES--Time necessary to complete the test. Proportion of cell nuclei containing two and three hybridisation signals in karyotypically normal and abnormal amniotic fluid samples. RESULTS--The test could be completed within three to four days after amniocentesis. In the normal samples a mean of 73% (range 61-82%) of the amniotic cell nuclei showed two hybridisation signals and 6% (0-18%) showed three signals. By contrast, among the trisomic samples 29% (19-38%) of the nuclei exhibited two signals and 48% (31-60%) showed three signals. CONCLUSION--The technique clearly distinguished between normal and trisomic samples. Prenatal diagnosis with in situ hybridisation with chromosome specific probes was fast and may make it possible to screen for selected, aneuploidies. However, the technique is still at a preliminary stage and needs further evaluation and refinement. Images p1537-a PMID:1385745

  14. Individual differences in left parietal white matter predict math scores on the Preliminary Scholastic Aptitude Test.

    Science.gov (United States)

    Matejko, Anna A; Price, Gavin R; Mazzocco, Michèle M M; Ansari, Daniel

    2013-02-01

    Mathematical skills are of critical importance, both academically and in everyday life. Neuroimaging research has primarily focused on the relationship between mathematical skills and functional brain activity. Comparatively few studies have examined which white matter regions support mathematical abilities. The current study uses diffusion tensor imaging (DTI) to test whether individual differences in white matter predict performance on the math subtest of the Preliminary Scholastic Aptitude Test (PSAT). Grades 10 and 11 PSAT scores were obtained from 30 young adults (ages 17-18) with wide-ranging math achievement levels. Tract based spatial statistics was used to examine the correlation between PSAT math scores, fractional anisotropy (FA), radial diffusivity (RD) and axial diffusivity (AD). FA in left parietal white matter was positively correlated with math PSAT scores (specifically in the left superior longitudinal fasciculus, left superior corona radiata, and left corticospinal tract) after controlling for chronological age and same grade PSAT critical reading scores. Furthermore, RD, but not AD, was correlated with PSAT math scores in these white matter microstructures. The negative correlation with RD further suggests that participants with higher PSAT math scores have greater white matter integrity in this region. Individual differences in FA and RD may reflect variability in experience dependent plasticity over the course of learning and development. These results are the first to demonstrate that individual differences in white matter are associated with mathematical abilities on a nationally administered scholastic aptitude measure.

  15. Using a situational judgement test for selection into dental core training: a preliminary analysis.

    Science.gov (United States)

    Rowett, E; Patterson, F; Cousans, F; Elley, K

    2017-05-12

    Objective and setting This paper describes the evaluation of a pilot situational judgement test (SJT) for selection into UK Dental Core Training (DCT). The SJT's psychometric properties, group differences based on gender and ethnicity, and candidate reactions were assessed.Methods The SJT targets four non-academic attributes important for success in DCT. Data were collected alongside live selection processes from five Health Education England local teams in the UK (N = 386). Candidates completed the pilot SJT and an evaluation questionnaire to examine their reactions to the test.Results SJT scores were relatively normally distributed and showed acceptable levels of internal reliability (α = 0.68). Difficulty level and partial correlations between scenarios and SJT total score were in the expected ranges (64.61% to 90.03% and r = 0.06 to 0.41, respectively). No group differences were found for gender, and group differences between White and BME candidates were minimal. Most candidates perceived the SJT as relevant to the target role, appropriate and fair.Conclusions This study demonstrated the potential suitability of an SJT for use in DCT selection. Future research should replicate these preliminary findings in other cohorts, and assess the predictive validity of the SJT for predicting key training and practice-based outcomes.

  16. A Job-Seeking Self-Efficacy Scale for People with Physical Disabilities: Preliminary Development and Psychometric Testing.

    Science.gov (United States)

    Barlow, Julie; Wright, Chris; Cullen, Lesley

    2002-01-01

    Study sought to develop and conduct preliminary testing of the psychometric properties of a job-seeking self-efficacy (JSS) scale that reflected the experiences of people with physical disabilities. Greater job seeking self-efficacy and perceived ability to manage disability at interview were associated with more positive psychological well-being.…

  17. Speech and Pause Characteristics in Multiple Sclerosis: A Preliminary Study of Speakers with High and Low Neuropsychological Test Performance

    Science.gov (United States)

    Feenaughty, Lynda; Tjaden, Kris; Benedict, Ralph H. B.; Weinstock-Guttman, Bianca

    2013-01-01

    This preliminary study investigated how cognitive-linguistic status in multiple sclerosis (MS) is reflected in two speech tasks (i.e. oral reading, narrative) that differ in cognitive-linguistic demand. Twenty individuals with MS were selected to comprise High and Low performance groups based on clinical tests of executive function and information…

  18. Design and preliminary test of a free-air ionization chamber for low-energy X-ray

    Institute of Scientific and Technical Information of China (English)

    吴金杰; 杨元第; 王培玮; 陈靖; 柳加成

    2011-01-01

    A free-air ionization chamber in low-energy X-ray has been designed and manufactured at the National Institute of Metrology (NIM, China) according to the defination of air-kerma. The results of a preliminary test show that the leakage current of ionizatio

  19. AGR-2 Irradiated Test Train Preliminary Inspection and Disassembly First Look

    Energy Technology Data Exchange (ETDEWEB)

    Ploger, Scott [Idaho National Lab. (INL), Idaho Falls, ID (United States); Demkowciz, Paul [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    The AGR 2 irradiation experiment began in June 2010 and was completed in October 2013. The test train was shipped to the Materials and Fuels Complex in July 2014 for post-irradiation examination (PIE). The first PIE activities included nondestructive examination of the test train, followed by disassembly of the test train and individual capsules and detailed inspection of the capsule contents, including the fuel compacts and their graphite fuel holders. Dimensional metrology was then performed on the compacts, graphite holders, and steel capsule shells. AGR 2 disassembly and metrology were performed with the same equipment used successfully on AGR 1 test train components. Gamma spectrometry of the intact test train gave a preliminary look at the condition of the interior components. No evidence of damage to compacts or graphite components was evident from the isotopic and gross gamma scans. Disassembly of the AGR 2 test train and its capsules was conducted rapidly and efficiently by employing techniques refined during the AGR 1 disassembly campaign. Only one major difficulty was encountered while separating the test train into capsules when thermocouples (of larger diameter than used in AGR 1) and gas lines jammed inside the through tubes of the upper capsules, which required new tooling for extraction. Disassembly of individual capsules was straightforward with only a few minor complications. On the whole, AGR 2 capsule structural components appeared less embrittled than their AGR 1 counterparts. Compacts from AGR 2 Capsules 2, 3, 5, and 6 were in very good condition upon removal. Only relatively minor damage or markings were visible using high resolution photographic inspection. Compact dimensional measurements indicated radial shrinkage between 0.8 to 1.7%, with the greatest shrinkage observed on Capsule 2 compacts that were irradiated at higher temperature. Length shrinkage ranged from 0.1 to 0.9%, with by far the lowest axial shrinkage on Capsule 3 compacts

  20. Running Club

    CERN Multimedia

    Running Club

    2010-01-01

    The 2010 edition of the annual CERN Road Race will be held on Wednesday 29th September at 18h. The 5.5km race takes place over 3 laps of a 1.8 km circuit in the West Area of the Meyrin site, and is open to everyone working at CERN and their families. There are runners of all speeds, with times ranging from under 17 to over 34 minutes, and the race is run on a handicap basis, by staggering the starting times so that (in theory) all runners finish together. Children (< 15 years) have their own race over 1 lap of 1.8km. As usual, there will be a “best family” challenge (judged on best parent + best child). Trophies are awarded in the usual men’s, women’s and veterans’ categories, and there is a challenge for the best age/performance. Every adult will receive a souvenir prize, financed by a registration fee of 10 CHF. Children enter free (each child will receive a medal). More information, and the online entry form, can be found at http://cern.ch/club...

  1. RUN COORDINATION

    CERN Multimedia

    Christophe Delaere

    2012-01-01

      On Wednesday 14 March, the machine group successfully injected beams into LHC for the first time this year. Within 48 hours they managed to ramp the beams to 4 TeV and proceeded to squeeze to β*=0.6m, settings that are used routinely since then. This brought to an end the CMS Cosmic Run at ~Four Tesla (CRAFT), during which we collected 800k cosmic ray events with a track crossing the central Tracker. That sample has been since then topped up to two million, allowing further refinements of the Tracker Alignment. The LHC started delivering the first collisions on 5 April with two bunches colliding in CMS, giving a pile-up of ~27 interactions per crossing at the beginning of the fill. Since then the machine has increased the number of colliding bunches to reach 1380 bunches and peak instantaneous luminosities around 6.5E33 at the beginning of fills. The average bunch charges reached ~1.5E11 protons per bunch which results in an initial pile-up of ~30 interactions per crossing. During the ...

  2. RUN COORDINATION

    CERN Multimedia

    C. Delaere

    2012-01-01

      With the analysis of the first 5 fb–1 culminating in the announcement of the observation of a new particle with mass of around 126 GeV/c2, the CERN directorate decided to extend the LHC run until February 2013. This adds three months to the original schedule. Since then the LHC has continued to perform extremely well, and the total luminosity delivered so far this year is 22 fb–1. CMS also continues to perform excellently, recording data with efficiency higher than 95% for fills with the magnetic field at nominal value. The highest instantaneous luminosity achieved by LHC to date is 7.6x1033 cm–2s–1, which translates into 35 interactions per crossing. On the CMS side there has been a lot of work to handle these extreme conditions, such as a new DAQ computer farm and trigger menus to handle the pile-up, automation of recovery procedures to minimise the lost luminosity, better training for the shift crews, etc. We did suffer from a couple of infrastructure ...

  3. Preliminary Analysis of the Transient Reactor Test Facility (TREAT) with PROTEUS

    Energy Technology Data Exchange (ETDEWEB)

    Connaway, H. M. [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, C. H. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-11-30

    The neutron transport code PROTEUS has been used to perform preliminary simulations of the Transient Reactor Test Facility (TREAT). TREAT is an experimental reactor designed for the testing of nuclear fuels and other materials under transient conditions. It operated from 1959 to 1994, when it was placed on non-operational standby. The restart of TREAT to support the U.S. Department of Energy’s resumption of transient testing is currently underway. Both single assembly and assembly-homogenized full core models have been evaluated. Simulations were performed using a historic set of WIMS-ANL-generated cross-sections as well as a new set of Serpent-generated cross-sections. To support this work, further analyses were also performed using additional codes in order to investigate particular aspects of TREAT modeling. DIF3D and the Monte-Carlo codes MCNP and Serpent were utilized in these studies. MCNP and Serpent were used to evaluate the effect of geometry homogenization on the simulation results and to support code-to-code comparisons. New meshes for the PROTEUS simulations were created using the CUBIT toolkit, with additional meshes generated via conversion of selected DIF3D models to support code-to-code verifications. All current analyses have focused on code-to-code verifications, with additional verification and validation studies planned. The analysis of TREAT with PROTEUS-SN is an ongoing project. This report documents the studies that have been performed thus far, and highlights key challenges to address in future work.

  4. Bridging the gap: Research and validation of the DST (Dynamic System Testing) performance test method for CE and ISO standards. Progress and preliminary results

    NARCIS (Netherlands)

    Naron, D.J.; Ree, B.G.C. van der; Rolloos, M.

    1998-01-01

    The Dynamic System Testing (DST) method is one of the methods chosen in the preliminary CEN/TC 312 European quality standards [1 ] to measure the energetic performance of Solar Domestic Hot Water (SDHW) systems. These European standards make a reference to the DST procedure as defined in the Draft I

  5. Hyperacuity test to evaluate vision through dense cataracts: research preliminary to a clinical study in India

    Science.gov (United States)

    Enoch, Jay M.; Giraldez, Maria J.; Huang, Doahua; Hirose, Hiroshi; Knowles, Richard A.; Namperumalsamy, P.; LaBree, Lauri; Azen, Stanley P.

    1995-03-01

    Using high luminance point-of-light stimuli, Vernier judgments can be made in the presence of markedly degraded retinal imagery. Without coaching, observers perform center-of-gravity assessments of relative locations of degraded point images. We seek to defined, presurgery, individuals who will derive the most benefit from advanced cataract removal (a form of triage), and to determine which of two cataractous eyes has the better postsurgical visual prognosis. There are incredible and growing backlogs of patients with severe cataracts (and other dense media opacities) in the developing world, and generally, limited resources are available for provision of health care. Postcataract surgical failure rates for good visual function are often high, and only one eye is operated on in over 95% of indigent patients treated. Prior to initiating advanced studies in the developing world, at Berkeley we conducted preliminary research on Vernier acuity test techniques on normal adult subjects. We sought to determine the number of repeat trials necessary; to compare a two-point and a three-point Vernier display; to determine the shape of the measured response function at large gap separations between test points (required when testing advanced cataract patients); to assess the effect(s) of a broad range of uncorrected refractive errors on outcomes; and to consider means to minimize refraction-based errors. From these and prior data and analyses, we defined a protocol for use in the developing world. Using a newly designed and rugged precision instrument, these tests were repeated on an advanced cataract population at Aravind Eye Hospital in Madurai, India. Although we had much prior experience in India, the initial protocol required major revision on site. Necessary changes in test methods and analytical approaches were made, and next stages in this program were planned. And a new and simple gap `visual acuity' (gap `VA') test was added to the protocol, which greatly facilitated

  6. Preliminary Flight Results of the Microelectronics and Photonics Test Bed: NASA DR1773 Fiber Optic Data Bus Experiment

    Science.gov (United States)

    Jackson, George L.; LaBel, Kenneth A.; Marshall, Cheryl; Barth, Janet; Seidleck, Christina; Marshall, Paul

    1998-01-01

    NASA Goddard Spare Flight Center's (GSFC) Dual Rate 1773 (DR1773) Experiment on the Microelectronic and Photonic Test Bed (MPTB) has provided valuable information on the performance of the AS 1773 fiber optic data bus in the space radiation environment. Correlation of preliminary experiment data to ground based radiation test results show the AS 1773 bus is employable in future spacecraft applications requiring radiation tolerant communication links.

  7. A smartphone-based platform to test the performance of wireless mobile networks and preliminary findings

    Science.gov (United States)

    Geng, Xinli; Xu, Hao; Qin, Xiaowei

    2016-10-01

    During the last several years, the amount of wireless network traffic data increased fast and relative technologies evolved rapidly. In order to improve the performance and Quality of Experience (QoE) of wireless network services, the analysis of field network data and existing delivery mechanisms comes to be a promising research topic. In order to achieve this goal, a smartphone based platform named Monitor and Diagnosis of Mobile Applications (MDMA) was developed to collect field data. Based on this tool, the web browsing service of High Speed Downlink Packet Access (HSDPA) network was tested. The top 200 popular websites in China were selected and loaded on smartphone for thousands times automatically. Communication packets between the smartphone and the cell station were captured for various scenarios (e.g. residential area, urban roads, bus station etc.) in the selected city. A cross-layer database was constructed to support the off-line analysis. Based on the results of client-side experiments and analysis, the usability of proposed portable tool was verified. The preliminary findings and results for existing web browsing service were also presented.

  8. Augmented Reality Cubes for Cognitive Gaming: Preliminary Usability and Game Experience Testing

    Directory of Open Access Journals (Sweden)

    Costas Boletsis

    2016-03-01

    Full Text Available Early detection is important in dementia care; however, cognitive impairment is still under-recognised and under-diagnosed. Cognitive screening and training are two important preventative treatments, which can lead to early detection of cognitive decline. In this work, the “Cognitive Augmented Reality Cubes” (CogARC system is presented, i.e. a serious game for cognitive training and screening, utilising an interaction technique based on Augmented Reality and the manipulation of tangible, physical objects (cubes. The game is a collection of cognitive mini-games of preventative nature and is, primarily, targeting elderly players (≥60 years old. A preliminary testing was conducted focusing on the game experience that CogARC offers (utilising the In-Game Experience Questionnaire, the usability of the system (using the System Usability Scale, and the specific user observations and remarks, as documented by open, semi-structured interviews.  Overall, CogARC demonstrated satisfying positive responses, however, the negative reactions indicated that there are specific problems with aspects of the interaction technique and a number of mini-games. The open interview shed more light on the specific issues of each mini-game and further interpretation of user interactions. The current study managed to provide interesting insights into the game design elements, integration of Augmented Reality, tangible interaction of the system, and on how elderly players perceive and use those interaction components. 

  9. A soft wearable robot for the shoulder: Design, characterization, and preliminary testing.

    Science.gov (United States)

    O'Neill, Ciaran T; Phipps, Nathan S; Cappello, Leonardo; Paganoni, Sabrina; Walsh, Conor J

    2017-07-01

    In this paper, we present a soft wearable robot for the shoulder which has the potential to assist individuals suffering from a range of neuromuscular conditions affecting the shoulder to perform activities of daily living. This wearable robot combines two types of soft textile pneumatic actuators which were custom developed for this particular application to support the upper arm through shoulder abduction and horizontal flexion/extension. The advantage of a textile-based approach is that the robot can be lightweight, low-profile, comfortable and non-restrictive to the wearer, and easy to don like an item of clothing. The actuator's ability to fold flat when not in use allows the robot to be almost invisible under clothing, potentially allowing the user to avoid any stigma associated with using assistive devices in public. To abduct the arm, a textilebased pneumatic actuator was developed to fit within the axilla to push the arm upwards, while a pair of smaller actuators pivot the abduction actuator to allow for horizontal extension and flexion. The individual textile actuators were experimentally evaluated before being integrated into a wearable garment. Human subject testing was performed to evaluate the ability of the robot to assist the arm by monitoring changes in biological muscle activity when comparing the robot powered on and off. Preliminary results show large reductions in muscular effort in targeted muscles, demonstrating the feasibility and promise of such a soft wearable robot for the shoulder.

  10. Soda-Anthraquinone Durian (Durio Zibethinus Murr.) Rind Linerboard and Corrugated Medium Paper: A Preliminary Test

    Science.gov (United States)

    Rizal Masrol, Shaiful; Irwan Ibrahim, Mohd Halim; Adnan, Sharmiza; Mubarak Sa'adon, Amir; Ika Sukarno, Khairil; Fadrol Hisham Yusoff, Mohd

    2017-08-01

    A preliminary test was conducted to investigate the characteristics of linerboard and corrugated medium paper made from durian rind waste. Naturally dried durian rinds were pulped according to Soda-Anthraquinone (Soda-AQ) pulping process with a condition of 20% active alkali, 0.1% AQ, 7:1 liquor to material ratio, 120 minutes cooking time and 170°C cooking temperature. The linerboard and corrugated medium paper with a basis weight of 120 gsm were prepared and evaluated according to Malaysian International Organization for Standardization (MS ISO) and Technical Association of the Pulp and Paper Industry (TAPPI). The results indicate that the characteristics of durian rind linerboard are comparable with other wood or non-wood based paper and current commercial paper. However, low CMT value for corrugated medium and water absorptiveness quality for linerboard could be improved in future. Based on the bulk density (0.672 g/cm3), burst index (3.12 kPa.m2/g) and RCT (2.00 N.m2/g), the durian rind has shown a good potential and suitable as an alternative raw material source for linerboard industry.

  11. Preliminary Tests of Cellular SiC/Iron Alloy Composite Produced by a Pressureless Infiltration Technique

    Directory of Open Access Journals (Sweden)

    Lipowska B.

    2017-03-01

    Full Text Available Preliminary tests aimed at obtaining a cellular SiC/iron alloy composite with a spatial structure of mutually intersecting skeletons, using a porous ceramic preform have been conducted. The possibility of obtaining such a composite joint using a SiC material with an oxynitride bonding and grey cast iron with flake graphite has been confirmed. Porous ceramic preforms were made by pouring the gelling ceramic suspension over a foamed polymer base which was next fired. The obtained samples of materials were subjected to macroscopic and microscopic observations as well as investigations into the chemical composition in microareas. It was found that the minimum width of a channel in the preform, which in the case of pressureless infiltration enables molten cast iron penetration, ranges from 0.10 to 0.17 mm. It was also found that the ceramic material applied was characterized by good metal wettability. The ceramics/metal contact area always has a transition zone (when the channel width is big enough, where mixing of the components of both composite elements takes place.

  12. Patient empowerment in long-term conditions: development and preliminary testing of a new measure.

    Science.gov (United States)

    Small, Nicola; Bower, Peter; Chew-Graham, Carolyn A; Whalley, Diane; Protheroe, Joanne

    2013-07-08

    Patient empowerment is viewed by policy makers and health care practitioners as a mechanism to help patients with long-term conditions better manage their health and achieve better outcomes. However, assessing the role of empowerment is dependent on effective measures of empowerment. Although many measures of empowerment exist, no measure has been developed specifically for patients with long-term conditions in the primary care setting. This study presents preliminary data on the development and validation of such a measure. We conducted two empirical studies. Study one was an interview study to understand empowerment from the perspective of patients living with long-term conditions. Qualitative analysis identified dimensions of empowerment, and the qualitative data were used to generate items relating to these dimensions. Study two was a cross-sectional postal study involving patients with different types of long-term conditions recruited from general practices. The survey was conducted to test and validate our new measure of empowerment. Factor analysis and regression were performed to test scale structure, internal consistency and construct validity. Sixteen predominately elderly patients with different types of long-term conditions described empowerment in terms of 5 dimensions (identity, knowledge and understanding, personal control, personal decision-making, and enabling other patients). One hundred and ninety seven survey responses were received from mainly older white females, with relatively low levels of formal education, with the majority retired from paid work. Almost half of the sample reported cardiovascular, joint or diabetes long-term conditions. Factor analysis identified a three factor solution (positive attitude and sense of control, knowledge and confidence in decision making and enabling others), although the structure lacked clarity. A total empowerment score across all items showed acceptable levels of internal consistency and relationships

  13. Scintigraphic test of gastric emptying and motility: preliminary results in patients with chronic gastritis

    Energy Technology Data Exchange (ETDEWEB)

    Hausmann, T. [Abt. Nuklearmedizin und Spezielle Biophysik, Medizinische Hochschule Hannover (Germany); Mueller-Schauenburg, W. [Abt. Nuklearmedizin, Univ. Tuebingen (Germany); Goeke, M. [Abt. Gastroenterologie und Hepatologie, Medizinische Hochschule Hannover (Germany); Luebeck, M. [Abt. Nuklearmedizin, Univ.-Krankenhaus Eppendorf, Hamburg (Germany); Gratz, K.F. [Abt. Nuklearmedizin und Spezielle Biophysik, Medizinische Hochschule Hannover (Germany); Meier, P. [Abt. Gastroenterologie und Hepatologie, Medizinische Hochschule Hannover (Germany); Manns, M. [Abt. Gastroenterologie und Hepatologie, Medizinische Hochschule Hannover (Germany); Hundeshagen, H. [Abt. Nuklearmedizin und Spezielle Biophysik, Medizinische Hochschule Hannover (Germany)

    1995-11-01

    To record gastric peristalsis using a conventional scintigraphic gastric emptying test the frame rate was increased to 1 frame per 3 s at 10, 30, and 50 min postprandially. The gastric contraction frequency was obtained from the first harmonic of a Fourier transform of a gastric region of interest (ROI) curve. The propagation of gastric contractions was better revealed from computed functional images of the phase and amplitude distribution as compared with the multiple scintigraphic images. The maximal count-rate changes per pixel were calculated as an estimate of the most prominent regional contractile activity of the gastric wall. Among 12 patients with chronic gastritis the group with more severe dyspeptic complaints (n = 6) had significantly higher count-rate changes per pixel when compared with the group with minor complaints (20.0, 21.1 and 14.2 vs 12.9, 12.0, and 10.4 counts/pixel X s at 10, 30, and 50 min. respectively; p < 0.05). The mean half-times of gastric emptying (61, SD 11 vs 54, SD 13 min) and the mean gastric contraction frequencies (2.99, SD 0.19; 3.09, SD 0.33; 3.07, SD 0.10 vs 3.15, SD 0.15; 3.17, SD 0.13; 3.23, SD 0.20 cycles/min at 10, 30, and 50 min, respectively) did not show significant differences between both groups. Our preliminary results agree with the hypothesis of the occurrence of more powerful, nonexpulsive gastric-wall contractions in patients with more severe dyspeptic complaints. Hence, additional quantification of gastric motility allowed a more detailed evaluation of gastric-motor-activity disorders that were for so long not accessible to conventional gastric-emptying tests. (orig.)

  14. Preliminary study of the behavioral and biological effects of high intensity 60 Hz electric fields. Quarterly technical progress report, No. 1. [Development and testing of experimental protocols and apparatus

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The major objective of this preliminary study is to develop and thoroughly test the experimental protocols and apparatus, which are planned for a major study of the behavioral and biological effects of high intensity 60 Hz electric fields. The behavior of baboons will be observed before, during, and after exposure to 60 Hz electric fields at a maximum intensity of 60 kV/m. Both individual performance (operant conditioning) and social behavior will be examined. The preliminary study will differ from the planned major study as follows: subjects will be used as their own controls; a smaller number of subjects will be run; field intensity will not be varied; the electric field should be non-uniform; the preliminary study exposure facility will be basically an outdoor facility; to avoid deterioration of plastic materials, the high intensity fields will not be turned on during or just after rainfall; and in the preliminary study the biological work will be restricted to the clinical determination of the health of subjects before and after exposure. The present report is the first of three quarterly technical progress reports. It covers approximately the first two and one-half months of activity and, therefore, consists primarily of plans. The report addresses four major areas: the high intensity field exposure facility; the field measurement instrumentation; the operation conditioning equipment; and experimental methods including experimental design and data analysis.

  15. PEP Integrated Test D Run Report Caustic and Oxidative Leaching in UFP-VSL-T02A

    Energy Technology Data Exchange (ETDEWEB)

    Sevigny, Gary J.; Bredt, Ofelia P.; Burns, Carolyn A.; Kurath, Dean E.; Geeting, John GH; Golovich, Elizabeth C.; Guzman-Leong, Consuelo E.; Josephson, Gary B.

    2009-12-11

    Pacific Northwest National Laboratory (PNNL) has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed and operated as part of a plan to respond to issue M12, "Undemonstrated Leaching Processes" of the External Flowsheet Review Team (EFRT) issue response plan. The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. The PEP also includes non-prototypic ancillary equipment to support the core processing. Two operating scenarios are currently being evaluated for the ultrafiltration process (UFP) and leaching operations. The first scenario (Test B and D) has caustic leaching performed in the UFP-2 ultrafiltration feed vessels (i.e., vessel UFP-VSL-T02A in the PEP and vessels UFP-VSL-00002A and B in the WTP PTF). The second scenario (Test A) has caustic leaching conducted in the UFP-1 ultrafiltration feed preparation vessels (i.e., vessels UFP-VSL-T01A and B in the PEP and vessels UFP VSL-00001A and B in the WTP PTF). In Test D, 19M sodium hydroxide (NaOH, caustic) was added to the waste slurry in the UFP VSL T02 vessel after the solids were concentrated to ~20% undissolved solids. The NaOH was added to leach solid aluminum compounds (e.g., gibbsite, boehmite). Caustic addition is followed by heating to 85°C using direct injection of steam to accelerate the leach process. The main difference of Test D compared to Test B is that the leach temperature is 85°C for 24 hrs as compared to 100°C for 12 hours. The other difference is the Test D simulant had Cr in the

  16. Do Generous Welfare States Generate Efficiency Gains Which Counterbalance Short Run Losses? Testing Downside Risk Theory with Economic Panel Data for the U.S., Germany and the Netherlands

    Science.gov (United States)

    Headey, Bruce; Muffels, Ruud

    2008-01-01

    The purpose of the paper is to assess the theory that the downside risk insurance provided by more generous welfare states generates long run efficiency gains, which counterbalance the short run efficiency losses caused by work disincentives in these states (Feldstein 1974, 1976; Sinn 1995, 1996). Testing downside risk theory requires long term…

  17. Performance characteristics of DRI, CEDIA, and REMEDi systems for preliminary tests of amphetamines and opiates in human urine.

    Science.gov (United States)

    Huang, Min-Kun; Dai, Yu-Shan; Lee, Choung-Huei; Liu, Chiareiy; Tsay, Wen-Ing; Li, Jih-Heng

    2006-01-01

    Arrestee urine specimens (930) were tested with DRI, CEDIA, and REMEDi; those that tested positive for amphetamines and opiates (616 and 414, respectively) were then confirmed by gas chromatography-mass spectrometry. The performance characteristics of these three preliminary systems were evaluated using the following commonly used parameters: true positive, true negative, false positive, and false negative. The sensitivity, specificity, and efficiency of these methods were also calculated. Data derived from this study indicated DRI and CEDIA adapted by this study generated acceptable preliminary test results for amphetamine/methamphetamine and morphine/codeine, but not for MDA/MDMA and REMEDi has lower sensitivity than DRI and CEDIA, but with better specificity and efficiency, supporting its use under emergency room settings where drug concentrations in overdose cases are expectedly at high levels.

  18. Hanford Waste Vitrification Program process development: Melt testing subtask, pilot-scale ceramic melter experiment, run summary

    Energy Technology Data Exchange (ETDEWEB)

    Nakaoka, R.K.; Bates, S.O.; Elmore, M.R.; Goles, R.W.; Perez, J.M.; Scott, P.A.; Westsik, J.H.

    1996-03-01

    Hanford Waste Vitrification Program (HWVP) activities for FY 1985 have included engineering and pilot-scale melter experiments HWVP-11/HBCM-85-1 and HWVP-12/PSCM-22. Major objectives designated by HWVP fo these tests were to evaluate the processing characteristics of the current HWVP melter feed during actual melter operation and establish the product quality of HW-39 borosilicate glass. The current melter feed, defined during FY 85, consists of reference feed (HWVP-RF) and glass-forming chemicals added as frit.

  19. Secular trends in the performance of children and adolescents (1980-2000): an analysis of 55 studies of the 20m shuttle run test in 11 countries.

    Science.gov (United States)

    Tomkinson, Grant R; Léger, Luc A; Olds, Tim S; Cazorla, Georges

    2003-01-01

    It is widely believed that the performance of children and adolescents on aerobic fitness tests is declining. To test this hypothesis, this meta-analysis compared the results of 55 reports of the performance of children and adolescents aged 6-19 years who have used the 20m shuttle run test (20mSRT). All data were collected in the period 1981-2000. Following corrections for methodological variation, the results of all studies were expressed using the common metric of running speed (km/h) at the last completed stage. Raw data were combined with pseudodata generated from reported means and standard deviations using Monte Carlo simulation. Where data were available on children and adolescents from the same country of the same age and sex, but tested at different times, linear regression was used to calculate rates of change. This was possible for 11 (mainly developed) countries, representing a total of 129,882 children and adolescents in 151 age x sex x country slices. There has been a significant decline in performance in the 11 countries where data were available, and in most age x sex groups, with a sample-weighted mean decline of 0.43% of mean values per year. The decline was most marked in older age groups and the rate of decline was similar for boys and girls. There has been a very rapid secular decline in the 20mSRT performance of children and adolescents over the last 20 years, at least in developed countries. The rate of decline is not related to the change in the country's relative wealth, as quantified by per capita gross domestic product (GDP).

  20. Crossvalidation of two 20-m shuttle-run tests for predicting VO2max in female collegiate soccer players.

    Science.gov (United States)

    Green, Michael S; Esco, Michael R; Martin, Tyler D; Pritchett, Robert C; McHugh, Aindrea N; Williford, Henry N

    2013-06-01

    The aim of this study was twofold: (a) to compare the maximal attained speed (MAS) from the 20-m shuttle (MST) and 20-m square-shuttle (SST) tests and (b) to crossvalidate 2 equations for predicting maximal oxygen consumption (VO2max) that were previously developed from MST and SST in a group of female collegiate soccer players. Thirty-nine subjects (age: 20.1 ± 1.5 years) participated in the study. A maximal graded exercise treadmill test was used to measure VO2max. In addition, VO2max was predicted from the MAS obtained during MST ((pred)VO2maxMST) and SST ((pred)VO2maxSST) using previously developed equations. Measured VO2max for the group was 44.2 ± 3.3 ml·kg(-1)·min(-1). The MAS was 12.5 ± 0.6 km·h(-1) for MST and 13.3 ± 0.8 km·h(-1) for SST (p < 0.05). The prediction methods yielded a (pred)VO2maxMST of 49.6 ± 3.9 ml·kg(-1)·min(-1) and predVO2maxSST of 41.8 ± 3.1 ml·kg(-1)·min(-1), which were significantly different from measured VO2max (p < 0.05). The validity statistics revealed the following constant error (CE), correlation coefficient (r), standard error of estimate (SEE), and total error (TE) for (pred)VO2maxMST and (pred)VO2maxSST: CE = 5.35 ± 3.83, r = 0.45 (p < 0.05), SEE = 2.97 ml·kg(-1)·min(-1), TE = 6.39 ml·kg(-1)·min(-1); and CE = -2.43 ± 2.49, r = 0.69 (p < 0.05), SEE = 2.39 ml·kg(-1)·min(-1), TE = 3.43 ml·kg(-1)·min(-1), respectively. Residual plots indicated no proportional bias for either prediction model. The results of this study suggest that female collegiate soccer players had a higher MAS from SST compared with that from MST. In addition, SST appeared to be a more accurate predictor of VO2max than MST in the group of athletes.

  1. Effect of compression stockings on physiological responses and running performance in division III collegiate cross-country runners during a maximal treadmill test.

    Science.gov (United States)

    Rider, Brian C; Coughlin, Adam M; Hew-Butler, Tamara D; Goslin, Brian R

    2014-06-01

    There is a growing trend for runners to use compression stockings (CS) to improve performance. The purpose of this study was to determine the effect of CS on physiological variables associated with running performance. Participants were 10 NCAA division III cross-country runners. The study used a randomized, crossover design with 2 conditions (with CS and without CS). Both conditions consisted of a maximal treadmill test that involved 3-minute stages of increasing speed and incline, separated by a minute and one-half walking recovery stage. Seven days later, the participants repeated the maximal test but switched CS condition. Heart rate, blood lactate (BLa), blood lactate threshold, maximal oxygen consumption (VO2max), respiratory exchange ratio, rating of perceived exertion, and time to fatigue were measured. Before and during the maximal treadmill tests, the variables showed no significant difference (p ≤ 0.05) between the CS conditions. Blood lactate was lower while wearing CS when measured during recovery at the 1-minute (CS = 13.3 ± 2.9 mmol · L(-1), non-CS = 14.8 ± 2.8 mmol · L(-1), p = 0.03) and the 5-minute (CS = 11.0 ± 2.7 mmol · L(-1), non-CS = 12.8 ± 2.8 mmol · L(-1), p = 0.02) periods. Time to fatigue was longer without CS (CS = 23.570 ± 2.39 minutes, non-CS = 23.93 ± 2.49 minutes, p = 0.04). These findings suggest that CS may not improve running performance, but could lend credence to certain manufacturers' claims of improved recovery through lower BLa values after exercise.

  2. Preliminary Results from Second Phase Sea Testing of the Wave Dragon Prototype Wave Energy Converter

    DEFF Research Database (Denmark)

    Soerensen, Hans Chr.; Tedd, James; Friis-Madsen, Erik;

    2006-01-01

    In March 2006 the prototype Wave Dragon has been redeployed to a more energetic site in Nissum Bredning an inland sea in Western Denmark. This has followed a period of renovation of many aspects of the device which have resulted in 20% higher energy output. This paper describes the preliminary re...

  3. Preliminary Results from Second Phase Sea Testing of the Wave Dragon Prototype Wave Energy Converter

    DEFF Research Database (Denmark)

    Soerensen, Hans Chr.; Tedd, James; Friis-Madsen, Erik

    2006-01-01

    In March 2006 the prototype Wave Dragon has been redeployed to a more energetic site in Nissum Bredning an inland sea in Western Denmark. This has followed a period of renovation of many aspects of the device which have resulted in 20% higher energy output. This paper describes the preliminary...

  4. Preliminary studies of tunnel interface response modeling using test data from underground storage facilities.

    Energy Technology Data Exchange (ETDEWEB)

    Sobolik, Steven Ronald; Bartel, Lewis Clark

    2010-11-01

    correctly image the tunnel. This report represents a preliminary step in the development of a methodology to convert numerical predictions of rock properties to an estimation of the extent of rock damage around an underground facility and its corresponding seismic velocity, and the corresponding application to design a testing methodology for tunnel detection.

  5. PRELIMINARY FRIT DEVELOPMENT AND MELT RATE TESTING FOR SLUDGE BATCH 6 (SB6)

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K.; Miller, D.; Edwards, T.

    2009-07-21

    The Liquid Waste Organization (LWO) provided the Savannah River National Laboratory (SRNL) with a Sludge Batch 6 (SB6) composition projection in March 2009. Based on this projection, frit development efforts were undertaken to gain insight into compositional effects on the predicted and measured properties of the glass waste form and to gain insight into frit components that may lead to improved melt rate for SB6-like compositions. A series of Sludge Batch 6 (SB6) based glasses was selected, fabricated and characterized in this study to better understand the ability of frit compositions to accommodate uncertainty in the projected SB6 composition. Acceptable glasses (compositions where the Product Composition Control System (PCCS) Measurement Acceptability Region (MAR) predicted acceptable properties, good chemical durability was measured, and no detrimental nepheline crystallization was observed) can be made using Frit 418 with SB6 over a range of Na{sub 2}O and Al{sub 2}O{sub 3} concentrations. However, the ability to accommodate variation in the sludge composition limits the ability to utilize alternative frits for potential improvements in melt rate. Frit 535, which may offer improvements in melt rate due to its increased B2O3 concentration, produced acceptable glasses with the baseline SB6 composition at waste loadings of 34 and 42%. However, the PCCS MAR results showed that it is not as robust as Frit 418 in accommodating variation in the sludge composition. Preliminary melt rate testing was completed in the Melt Rate Furnace (MRF) with four candidate frits for SB6. These four frits were selected to evaluate the impacts of B{sub 2}O{sub 3} and Na{sub 2}O concentrations in the frit relative to those of Frit 418, although they are not necessarily candidates for SB6 vitrification. Higher concentrations of B{sub 2}O{sub 3} in the frit relative to that of Frit 418 appeared to improve melt rate. However, when a higher concentration of B{sub 2}O{sub 3} was coupled

  6. New lab-made coagulant based on Schinopsis balansae tannin extract: synthesis optimization and preliminary tests on refractory water pollutants

    Science.gov (United States)

    Sánchez-Martín, J.; Beltrán-Heredia, J.; Coco-Rivero, B.

    2014-09-01

    Quebracho colorado tannin extract was used as a coagulant raw material for water and wastewater treatment. The chemical synthesis follows a Mannich reaction mechanism and provides a fully working coagulant that can remove several pollutants from water. This paper addresses the optimization of such synthesis and confirms the feasibility of the coagulant by testing it in a preliminary screening for the elimination of dyes and detergents. The optimum combination of reagents was 6.81 g of diethanolamine (DEA) and 2.78 g of formaldehyde (F) per g of tannin extract. So obtained coagulant was succesfully tested on the removal of 9 dyes and 8 detergents.

  7. The CAST (Childhood Asperger Syndrome Test): preliminary development of a UK screen for mainstream primary-school-age children.

    Science.gov (United States)

    Scott, Fiona J; Baron-Cohen, Simon; Bolton, Patrick; Brayne, Carol

    2002-03-01

    The article describes a pilot and follow-up study of the preliminary development of a new tool to screen for Asperger syndrome (AS) and related social and communication conditions (the Childhood Asperger Syndrome Test, CAST) in children aged 4-11 years, in a non-clinical setting. In the pilot study, parents of 13 children with AS and of 37 typically developing children completed the CAST. There were significant differences between the AS and typical sample means. The pilot was used to establish preliminary cut-off scores for the CAST. In the main study, parents of 1150 primary-school-age children were sent the CAST, and 174 took part in the full data analysis. Results suggest that compared with other tools currently available, the CAST may be useful for identifying children at risk for AS and related conditions, in a mainstream non-clinical sample. Further research is ongoing.

  8. Evaluation of the running-based anaerobic sprint test as a measure of repeated sprint ability in collegiate-level soccer players.

    Science.gov (United States)

    Keir, Daniel A; Thériault, Francis; Serresse, Olivier

    2013-06-01

    Repeated sprint ability (RSA) refers to an individual's ability to perform maximal sprints of short duration in succession with little recovery between sprints. The running-based anaerobic sprint test (RAST) has been adapted from the Wingate anaerobic test (WAnT) protocol as a tool to assess RSA and anaerobic power. The purpose of this study was to evaluate the relationship between performance variables and physiological responses obtained during the RAST and the WAnT using 8 collegiate-level soccer players. Participants performed a single trial of both the WAnT and the RAST. Breath-by-breath gas exchange was monitored throughout each trial, and blood lactate (BL) measures were recorded postexercise. The oxygen uptake (VO2) profile suggested that the RAST required greater contributions from aerobic metabolism although there was no difference in VO2peak (p < 0.05). Peak BL values were also similar between the RAST and the WAnT (p < 0.05). Neither peak physiological values nor performance variables (peak and mean power) were significantly correlated between protocols. The weak association in physiological responses indicates that different combinations of metabolic contributions exist between protocols, suggesting that individual performances on each test are not related in collegiate soccer players. Further studies on these relationships with players of other competitive levels and team sport athletes are warranted.

  9. Preliminary Feasibility, Design, and Hazard Analysis of a Boiling Water Test Loop Within the Idaho National Laboratory Advanced Test Reactor National Scientific User Facility

    Energy Technology Data Exchange (ETDEWEB)

    Douglas M. Gerstner

    2009-05-01

    The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The ATR and its support facilities are located at the Idaho National Laboratory (INL). A Boiling Water Test Loop (BWTL) is being designed for one of the irradiation test positions within the. The objective of the new loop will be to simulate boiling water reactor (BWR) conditions to support clad corrosion and related reactor material testing. Further it will accommodate power ramping tests of candidate high burn-up fuels and fuel pins/rods for the commercial BWR utilities. The BWTL will be much like the pressurized water loops already in service in 5 of the 9 “flux traps” (region of enhanced neutron flux) in the ATR. The loop coolant will be isolated from the primary coolant system so that the loop’s temperature, pressure, flow rate, and water chemistry can be independently controlled. This paper presents the proposed general design of the in-core and auxiliary BWTL systems; the preliminary results of the neutronics and thermal hydraulics analyses; and the preliminary hazard analysis for safe normal and transient BWTL and ATR operation.

  10. IMPLEMENTING FISCAL OR MONETARY POLICY IN TIME OF CRISIS? RUNNING GRANGER CAUSALITY TO TEST THE PHILLIPS CURVE IN SOME EURO ZONE COUNTRIES

    Directory of Open Access Journals (Sweden)

    Nico Gianluigi

    2014-12-01

    Full Text Available This paper aims to provide empirical evidence about the theoretical relationship between inflation and unemployment in 9 European countries. Based on two major goals for economic policymakers namely, to keep both inflation and unemployment low, we use the ingredients of the Phillips curve to orient fiscal and monetary policies. These policies are prerogative for the achievement of a desirable combination of unemployment and inflation. More in detail, we attempt to address two basic issues. One strand of the study examines the size and sign of the impact of unemployment rate on percentage changes in inflation. In our preferred econometric model, we have made explicit the evidence according to which one unit increase (% in unemployment reduces inflation of roughly 0.73 percent, on average. Next, we turn to the question concerning the causal link between inflation and unemployment and we derive a political framework enables to orient European policymakers in the implementation of either fiscal or monetary policy. In this context, by means of the Granger causality test, we mainly find evidence of a directional causality which runs from inflation to unemployment in 4 out of 9 European countries under analysis. This result implies that political authorities of Austria, Belgium, Germany and Italy should implement monetary policy in order to achieve pre-established targets of unemployment and inflation. In the same context, a directional causality running from unemployment to inflation has been found in France and Cyprus suggesting that a reduction in the unemployment level can be achieved through controlling fiscal policy. However, succeeding in this goal may lead to an increasing demand for goods and services which, in turn, might cause a higher inflation than expected. Finally, while there is no statistical evidence of a causal link between unemployment and inflation in Finland and Greece, a bidirectional causality has been found in Estonia. This

  11. Nuclear maintenance strategy and first steps for preliminary maintenance plan of the EU HCLL & HCPB Test Blanket Systems

    Energy Technology Data Exchange (ETDEWEB)

    Galabert, Jose, E-mail: jose.galabert@f4e.europa.eu [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); Hopper, Dave [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom); Neviere, Jean-Cristophe [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Nodwell, David [CCFE, Culham Science Centre, Abingdon, OX14 3DB, Oxfordshire (United Kingdom); Pascal, Romain [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Poitevin, Yves; Ricapito, Italo [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); White, Gareth [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom)

    2017-03-15

    Highlights: • Nuclear maintenance strategy for the two European (EU) Test Blanket Systems (TBS): i/. Helium Cooled Lead Lithium (HCLL) and ii/. Helium Cooled Pebble Bed (HCPB). • Preliminary identification of maintenance tasks for most relevant components of the EU HCLL & HCPB TBS. • Preliminary feasibility analysis for hands-on maintenance tasks of some relevant components of the European Test Blanket Systems. • Design recommendations for enhancement of the European Test Blanket Systems maintainability. - Abstract: This paper gives an overview of nuclear maintenance strategy to be followed for the European HCLL & HCPB Test Blanket Systems (TBS) to be installed in ITER. One of the several core documents to prepare in view of their licensing is their respective ‘Maintenance Plan’. This document is fundamental for ensuring sound performance and safety of the TBS during ITER’s operational phase and shall include, amongst others, relevant information on: maintenance organization, preventive and corrective maintenance task procedures, condition monitoring for key components, maintenance work planning, and a spare parts plan, just to mention some of the key topics. In compliance with the ITER Plant Maintenance policy, first steps have been taken aimed at defining nuclear maintenance strategy for some of the most relevant HCLL & HCPB TBS components, conducted by F4E in collaboration with industry. After a brief recall of maintenance strategy of the TBM Program (PBS-56), this paper analyses main features of EU HCLL & HCPB TBS maintainability and identifies, at their conceptual design phase, a preliminary list of maintenance tasks to be developed for their most representative components. In addition, the paper also presents the first nuclear maintenance studies conducted for replacement of the Q{sub 2} Getter Beds, identifying some design recommendations for their sound maintainability.

  12. Fish-Friendly Hydropower Turbine Development & Deployment: Alden Turbine Preliminary Engineering and Model Testing

    Energy Technology Data Exchange (ETDEWEB)

    Foust, J. [Voith Hydro, Inc., York, PA (USA); Hecker, G. [Alden Research Laboratory, Inc., Holden, MA (USA); Li, S. [Alden Research Laboratory, Inc., Holden, MA (USA); Allen, G. [Alden Research Laboratory, Inc., Holden, MA (USA)

    2011-10-01

    The Alden turbine was developed through the U.S. Department of Energy's (DOE's) former Advanced Hydro Turbine Systems Program (1994-2006) and, more recently, through the Electric Power Research Institute (EPRI) and the DOE's Wind & Water Power Program. The primary goal of the engineering study described here was to provide a commercially competitive turbine design that would yield fish passage survival rates comparable to or better than the survival rates of bypassing or spilling flow. Although the turbine design was performed for site conditions corresponding to 92 ft (28 m) net head and a discharge of 1500 cfs (42.5 cms), the design can be modified for additional sites with differing operating conditions. During the turbine development, design modifications were identified for the spiral case, distributor (stay vanes and wicket gates), runner, and draft tube to improve turbine performance while maintaining features for high fish passage survival. Computational results for pressure change rates and shear within the runner passage were similar in the original and final turbine geometries, while predicted minimum pressures were higher for the final turbine. The final turbine geometry and resulting flow environments are expected to further enhance the fish passage characteristics of the turbine. Computational results for the final design were shown to improve turbine efficiencies by over 6% at the selected operating condition when compared to the original concept. Prior to the release of the hydraulic components for model fabrication, finite element analysis calculations were conducted for the stay vanes, wicket gates, and runner to verify that structural design criteria for stress and deflections were met. A physical model of the turbine was manufactured and tested with data collected for power and efficiency, cavitation limits, runaway speed, axial and radial thrust, pressure pulsations, and wicket gate torque. All parameters were observed to fall

  13. A Reduction in Maximal Incremental Exercise Test Duration 48 h Post Downhill Run Is Associated with Muscle Damage Derived Exercise Induced Pain

    Science.gov (United States)

    Chrismas, Bryna C. R.; Taylor, Lee; Siegler, Jason C.; Midgley, Adrian W.

    2017-01-01

    Purpose: To examine whether exercise induced muscle damage (EIMD) and muscle soreness reduce treadmill maximal incremental exercise (MIE) test duration, and true maximal physiological performance as a consequence of exercise induced pain (EIP) and perceived effort. Methods: Fifty (14 female), apparently healthy participants randomly allocated into a control group (CON, n = 10), or experimental group (EXP, n = 40) visited the laboratory a total of six times: visit 1 (familiarization), visit 2 (pre 1), visit 3 (pre 2), visit 4 (intervention), visit 5 (24 h post) and visit 6 (48 h post). Both groups performed identical testing during all visits, except during visit 4, where only EXP performed a 30 min downhill run and CON performed no exercise. During visits 2, 3, and 6 all participants performed MIE, and the following measurements were obtained: time to exhaustion (TTE), EIP, maximal oxygen consumption (V·O2max), rate of perceived exertion (RPE), maximum heart rate (HRmax), maximum blood lactate (BLamax), and the contribution of pain to terminating the MIE (assessed using a questionnaire). Additionally during visits 1, 2, 3, 5, and 6 the following markers of EIMD were obtained: muscle soreness, maximum voluntary contraction (MVC), voluntary activation (VA), creatine kinase (CK). Results: There were no significant differences (p ≥ 0.32) between any trials for any of the measures obtained during MIE for CON. In EXP, TTE decreased by 34 s (3%), from pre 2 to 48 h post (p MVC, and VA. The exact mechanisms responsible for this require further investigation. PMID:28337151

  14. Changes in running economy following downhill running.

    Science.gov (United States)

    Chen, Trevor C; Nosaka, Kazunori; Tu, Jui-Hung

    2007-01-01

    In this study, we examined the time course of changes in running economy following a 30-min downhill (-15%) run at 70% peak aerobic power (VO2peak). Ten young men performed level running at 65, 75, and 85% VO2peak (5 min for each intensity) before, immediately after, and 1 - 5 days after the downhill run, at which times oxygen consumption (VO2), minute ventilation, the respiratory exchange ratio (RER), heart rate, ratings of perceived exertion (RPE), and blood lactate concentration were measured. Stride length, stride frequency, and range of motion of the ankle, knee, and hip joints during the level runs were analysed using high-speed (120-Hz) video images. Downhill running induced reductions (7 - 21%, P run. Oxygen consumption increased (4 - 7%, P stride frequency, as well as reductions in stride length and range of motion of the ankle and knee. The results suggest that changes in running form and compromised muscle function due to muscle damage contribute to the reduction in running economy for 3 days after downhill running.

  15. Effects of marathon running on running economy and kinematics.

    Science.gov (United States)

    Kyröläinen, H; Pullinen, T; Candau, R; Avela, J; Huttunen, P; Komi, P V

    2000-07-01

    The present study was designed to investigate interactions between running economy and mechanics before, during, and after an individually run marathon. Seven experienced triathletes performed a 5-min submaximal running test on a treadmill at an individual constant marathon speed. Heart rate was monitored and the expired respiratory gas was analyzed. Blood samples were drawn to analyze serum creatine kinase activity (S-CK), skeletal troponin I (sTnI), and blood lactate (B-La). A video analysis was performed (200 frames x s(-1)) to investigate running mechanics. A kinematic arm was used to determine the external work of each subject. The results of the present study demonstrate that after the marathon, a standardized 5-min submaximal running test resulted in an increase in oxygen consumption, ventilation, and heart rate (P stride frequency and a similar decrease in stride length were observed (P < 0.01). These results demonstrate clearly that weakened running economy cannot be explained by changes in running mechanics. Therefore, it is suggested that the increased physiological loading is due to several mechanisms: increased utilization of fat as an energy substrate, increased demands of body temperature regulation, and possible muscle damage.

  16. Design and preliminary test of a free-air ionization chamber for low-energy X-ray

    Institute of Scientific and Technical Information of China (English)

    WU Jin-Jie; YANG Yuan-Di; WANG Pei-Wei; CHEN Jing; LIU Jia-Cheng

    2011-01-01

    A free-air ionization chamber in low-energy X-ray has been designed and manufactured at theNational Institute of Metrology (NIM, China) according to the defination of alr-kerma. The results of a preliminary test show that the leakage current of ionization chamber is around 2×10A, and the correction factor of ion recombination for the ionization chamber is also obtained. The free-air ionization chamber is suitable for the primary standard in low-energy X-rays.

  17. TESTING CMAQ CHEMISTRY SENSITIVITIES IN BASE CHASE AND EMISSION CONTROL RUNS AT SEARCH AND SOS 99 SURFACE SITES IN THE SOUTHEASTERN UNITED STATES

    Science.gov (United States)

    CMAQ was run to simulate urban conditions in the southeastern U.S. in July 1999 at 32, 8, and 2 km grid spacings. Runs were made with two older mechanisms, Carbon Bond IV (CB4) and the Regional Acid Deposition Model, version 2 (RADM2), and with the more recent California Statewid...

  18. Preliminary chemical analysis and biological testing of materials from the HRI catalytic two-stage liquefaction (CTSL) process. [Aliphatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Later, D.W.; Wilson, B.W.

    1985-01-01

    Coal-derived materials from experimental runs of Hydrocarbon Research Incorporated's (HRI) catalytic two-stage liquefaction (CTSL) process were chemically characterized and screened for microbial mutagenicity. This process differs from two-stage coal liquefaction processes in that catalyst is used in both stages. Samples from both the first and second stages were class-fractionated by alumina adsorption chromatography. The fractions were analyzed by capillary column gas chromatography; gas chromatography/mass spectrometry; direct probe, low voltage mass spectrometry; and proton nuclear magnetic resonance spectrometry. Mutagenicity assays were performed with the crude and class fractions in Salmonella typhimurium, TA98. Preliminary results of chemical analyses indicate that >80% CTSL materials from both process stages were aliphatic hydrocarbon and polynuclear aromatic hydrocarbon (PAH) compounds. Furthermore, the gross and specific chemical composition of process materials from the first stage were very similar to those of the second stage. In general, the unfractionated materials were only slightly active in the TA98 mutagenicity assay. Like other coal liquefaction materials investigated in this laboratory, the nitrogen-containing polycyclic aromatic compound (N-PAC) class fractions were responsible for the bulk of the mutagenic activity of the crudes. Finally, it was shown that this activity correlated with the presence of amino-PAH. 20 figures, 9 tables.

  19. Observing the Testing Effect using Coursera Video-Recorded Lectures: A Preliminary Study.

    Science.gov (United States)

    Yong, Paul Zhihao; Lim, Stephen Wee Hun

    2015-01-01

    We investigated the testing effect in Coursera video-based learning. One hundred and twenty-three participants either (a) studied an instructional video-recorded lecture four times, (b) studied the lecture three times and took one recall test, or (c) studied the lecture once and took three tests. They then took a final recall test, either immediately or a week later, through which their learning was assessed. Whereas repeated studying produced better recall performance than did repeated testing when the final test was administered immediately, testing produced better performance when the final test was delayed until a week after. The testing effect was observed using Coursera lectures. Future directions are documented.

  20. A Reduction in Maximal Incremental Exercise Test Duration 48 h Post Downhill Run Is Associated with Muscle Damage Derived Exercise Induced Pain.

    Science.gov (United States)

    Chrismas, Bryna C R; Taylor, Lee; Siegler, Jason C; Midgley, Adrian W

    2017-01-01

    Purpose: To examine whether exercise induced muscle damage (EIMD) and muscle soreness reduce treadmill maximal incremental exercise (MIE) test duration, and true maximal physiological performance as a consequence of exercise induced pain (EIP) and perceived effort. Methods: Fifty (14 female), apparently healthy participants randomly allocated into a control group (CON, n = 10), or experimental group (EXP, n = 40) visited the laboratory a total of six times: visit 1 (familiarization), visit 2 (pre 1), visit 3 (pre 2), visit 4 (intervention), visit 5 (24 h post) and visit 6 (48 h post). Both groups performed identical testing during all visits, except during visit 4, where only EXP performed a 30 min downhill run and CON performed no exercise. During visits 2, 3, and 6 all participants performed MIE, and the following measurements were obtained: time to exhaustion (TTE), EIP, maximal oxygen consumption [Formula: see text], rate of perceived exertion (RPE), maximum heart rate (HRmax), maximum blood lactate (BLamax), and the contribution of pain to terminating the MIE (assessed using a questionnaire). Additionally during visits 1, 2, 3, 5, and 6 the following markers of EIMD were obtained: muscle soreness, maximum voluntary contraction (MVC), voluntary activation (VA), creatine kinase (CK). Results: There were no significant differences (p ≥ 0.32) between any trials for any of the measures obtained during MIE for CON. In EXP, TTE decreased by 34 s (3%), from pre 2 to 48 h post (p < 0.001). There was a significant association between group (EXP, CON) and termination of the MIE due to "pain" during 48 h post (χ(2) = 14.7, p = 0.002). Conclusion: EIMD resulted in premature termination of a MIE test (decreased TTE), which was associated with EIP, MVC, and VA. The exact mechanisms responsible for this require further investigation.

  1. Geomechanical properties of Topopah Spring Tuff at the 0.5-m scale: preliminary results of compression tests at elevated temperature

    Energy Technology Data Exchange (ETDEWEB)

    Blair, S. C., LLNL

    1997-08-25

    This report presents preliminary results of laboratory testing of a small block sample of Topopah Spring Tuff. This is the first in a series of tests on small block samples. The purpose of these tests is to investigate the thermal-mechanical, thermal-hydrological, and thermal-chemical response of the rock to conditions similar to the near-field environment (NFE) of a potential nuclear waste repository. This report presents preliminary results of deformation and elastic- wave velocity measurements on a 0.5-m scale block of Topopah Spring tuff tested in uniaxial compression and at temperatures to 85{degrees}C.

  2. Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

    Science.gov (United States)

    White, Maurice A.; Qiu, Songgang; Augenblick, Jack E.

    2000-01-01

    Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's). .

  3. Can Unshod Running Reduce Running Injuries?

    Science.gov (United States)

    2012-06-08

    quadrupeds run, their internal organs expand and contract like an accordion as they stride when running. As a cheetah strides forward, its lungs expand...and take in air. When the cheetah compresses its stride, the lungs are collapsed and the cheetah breathes out. This take-a-step and take-a- breath

  4. Wave Run-Up on Rubble Breakwaters

    DEFF Research Database (Denmark)

    Van de Walle, Bjorn; De Rouck, Julien; Troch, Peter

    2005-01-01

    Seven sets of data for wave run-up on a rubble mound breakwater were combined and re-analysed, with full-scale, large-scale and small-scale model test results being taken into account. The dimensionless wave run-up value Ru-2%/Hm0 was considered, where R u-2% is the wave run-up height exceeded by...

  5. Velocity Measurements in Nasal Cavities by Means of Stereoscopic Piv - Preliminary Tests

    Science.gov (United States)

    Cozzi, Fabio; Felisati, Giovanni; Quadrio, Maurizio

    2017-08-01

    The prediction of detailed flow patterns in human nasal cavities using computational fluid dynamics (CFD) can provide essential information on the potential relationship between patient-specific geometrical characteristics of the nasal anatomy and health problems, and ultimately led to improved surgery. The complex flow structure and the intricate geometry of the nasal cavities make achieving such goals a challenge for CFD specialists. The need for experimental data to validate and improve the numerical simulations is particularly crucial. To this aim an experimental set-up based on Stereo PIV and a silicon phantom of nasal cavities have been designed and realized at Politecnico di Milano. This work describes the main features and challenges of the set-up along with some preliminary results.

  6. Preliminary benefit-cost analysis of the Fast Flux Test Facility (FFTF) power addition

    Energy Technology Data Exchange (ETDEWEB)

    Callaway, J.M.; Lezberg, A.J.; Scott, M.J.; Tawil, J.J.

    1984-07-01

    The primary objective of this report is to conduct a preliminary benefit-cost study for the proposed power addition to FFTF to determine whether the project is cost-effective. If the project is authorized, construction will begin in 1986 and end in 1991. Full power operation is scheduled to begin in 1991 and a project life of 20 years is assumed. The undiscounted cost during the construction period of the FFTF power addition is estimated to be approximately $117 million over the construction period (1984 dollars). An additional $3 million is estimated as the opportunity cost - or value of these resources in their most favorable alternative use - of surplus FFTF equipment and unused CRBR equipment, including materials for steam generator fabrication. The annual operating and maintenance cost of the project is estimated to be about $2.1 million in 1984 dollars. 20 references.

  7. Determinants Of Savings Behavior In Pakistan: Long Run - Short Run Association And Causality

    OpenAIRE

    Ahmad Fawad

    2015-01-01

    The existing studies on private savings have mostly investigated the long run and short association of different variables with private savings, whereas no known study has investigated both long run and short run causality of variables against private savings by using data of Pakistan. The current study used time series data of Pakistan over the period of 1972 to 2012 and employed long run cointegration test, first normalized equation for long run association, vector error correction model fo...

  8. Observing the Testing Effect using Coursera Video-recorded Lectures: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Paul Zhihao eYONG

    2016-01-01

    Full Text Available We investigated the testing effect in Coursera video-based learning. One hundred and twenty-three participants either (a studied an instructional video-recorded lecture four times, (b studied the lecture three times and took one recall test, or (c studied the lecture once and took three tests. They then took a final recall test, either immediately or a week later, through which their learning was assessed. Whereas repeated studying produced better recall performance than did repeated testing when the final test was administered immediately, testing produced better performance when the final test was delayed until a week after. The testing effect was observed using Coursera lectures. Future directions are documented.

  9. Preliminary Computational Study for Future Tests in the NASA Ames 9 foot' x 7 foot Wind Tunnel

    Science.gov (United States)

    Pearl, Jason M.; Carter, Melissa B.; Elmiligui, Alaa A.; WInski, Courtney S.; Nayani, Sudheer N.

    2016-01-01

    The NASA Advanced Air Vehicles Program, Commercial Supersonics Technology Project seeks to advance tools and techniques to make over-land supersonic flight feasible. In this study, preliminary computational results are presented for future tests in the NASA Ames 9 foot x 7 foot supersonic wind tunnel to be conducted in early 2016. Shock-plume interactions and their effect on pressure signature are examined for six model geometries. Near- field pressure signatures are assessed using the CFD code USM3D to model the proposed test geometries in free-air. Additionally, results obtained using the commercial grid generation software Pointwise Reigistered Trademark are compared to results using VGRID, the NASA Langley Research Center in-house mesh generation program.

  10. PDU Run 10

    Energy Technology Data Exchange (ETDEWEB)

    1981-09-01

    PDU Run 10, a 46-day H-Coal syncrude mode operation using Wyodak coal, successfully met all targeted objectives, and was the longest PDU operation to date in this program. Targeted coal conversion of 90 W % was exceeded with a C/sub 4/-975/sup 0/F distillate yield of 43 to 48 W %. Amocat 1A catalyst was qualified for Pilot Plant operation based on improved operation and superior performance. PDU 10 achieved improved yields and lower hydrogen consumption compared to PDU 6, a similar operation. High hydroclone efficiency and high solids content in the vacuum still were maintained throughout the run. Steady operations at lower oil/solids ratios were demonstrated. Microautoclave testing was introduced as an operational aid. Four additional studies were successfully completed during PDU 10. These included a catalyst tracer study in conjunction with Sandia Laboratories; tests on letdown valve trims for Battelle; a fluid dynamics study with Amoco; and special high-pressure liquid sampling.

  11. Preliminary evaluation of a micro-based repeated measures testing system

    Science.gov (United States)

    Kennedy, Robert S.; Wilkes, Robert L.; Lane, Norman E.

    1985-01-01

    A need exists for an automated performance test system to study the effects of various treatments which are of interest to the aerospace medical community, i.e., the effects of drugs and environmental stress. The ethics and pragmatics of such assessment demand that repeated measures in small groups of subjects be the customary research paradigm. Test stability, reliability-efficiency and factor structure take on extreme significance; in a program of study by the U.S. Navy, 80 percent of 150 tests failed to meet minimum metric requirements. The best is being programmed on a portable microprocessor and administered along with tests in their original formats in order to examine their metric properties in the computerized mode. Twenty subjects have been tested over four replications on a 6.0 minute computerized battery (six tests) and which compared with five paper and pencil marker tests. All tests achieved stability within the four test sessions, reliability-efficiencies were high (r greater than .707 for three minutes testing), and the computerized tests were largely comparable to the paper and pencil version from which they were derived. This computerized performance test system is portable, inexpensive and rugged.

  12. Preliminary Research Employing the Watson-Barker Listening Test: A Validation of the Instrument.

    Science.gov (United States)

    Roberts, Charles V.

    A study was conducted to further validate the "Watson-Barker Listening Test." The subjects, 120 students enrolled in basic speech courses, completed the Receiver Apprehension Test (RAT) and the Watson-Barker Listening Test: Form A. Statistical analysis of the results revealed a significant correlation between the RAT scores and both the long term…

  13. Preliminary Multirod Burst Test Program results and implications of interest to reactor safety evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, R.H. (comp.)

    1978-01-01

    The Multirod Burst Test (MRBT) Program, in progress at Oak Ridge National Laboratory, is investigating LWR cladding deformation in single- and multirod test arrays under conditions representative of reflood and refill phases of a LOCA. In these tests internally pressurized, unirradiated Zircaloy-4 tubes containing electrically heated fuel simulators are tested to failure in a low-pressure, superheated-steam environment. The tubes are ''uniformly'' heated over a 915-mm length; the simulator pressure, due to the small enclosed gas volume, also varies with temperature (and deformation) during the test. Two 4 x 4 multirod tests (B-1 and B-2), one with and one without the shroud being heated, have been conducted with a bundle heating rate of approx. 29/sup 0/C/sec; initial pressure conditions for these tests were selected to cause failure at about 860/sup 0/C. An additional 4 x 4 array (B-3) was tested using a bundle heating rate of approx. 10/sup 0/C/sec; the shroud was also heated in this test. Initial conditions were adjusted to cause failure at approx. 760/sup 0/C. Posttest examination (including flow tests) of the B-1 and B-2 test arrays, is essentially complete, and pertinent data are included in this summary.

  14. Development and Preliminary Testing of a High Precision Long Stroke Slit Change Mechanism for the SPICE Instrument

    Science.gov (United States)

    Paciotti, Gabriel; Humphries, Martin; Rottmeier, Fabrice; Blecha, Luc

    2014-01-01

    In the frame of ESA's Solar Orbiter scientific mission, Almatech has been selected to design, develop and test the Slit Change Mechanism of the SPICE (SPectral Imaging of the Coronal Environment) instrument. In order to guaranty optical cleanliness level while fulfilling stringent positioning accuracies and repeatability requirements for slit positioning in the optical path of the instrument, a linear guiding system based on a double flexible blade arrangement has been selected. The four different slits to be used for the SPICE instrument resulted in a total stroke of 16.5 mm in this linear slit changer arrangement. The combination of long stroke and high precision positioning requirements has been identified as the main design challenge to be validated through breadboard models testing. This paper presents the development of SPICE's Slit Change Mechanism (SCM) and the two-step validation tests successfully performed on breadboard models of its flexible blade support system. The validation test results have demonstrated the full adequacy of the flexible blade guiding system implemented in SPICE's Slit Change Mechanism in a stand-alone configuration. Further breadboard test results, studying the influence of the compliant connection to the SCM linear actuator on an enhanced flexible guiding system design have shown significant enhancements in the positioning accuracy and repeatability of the selected flexible guiding system. Preliminary evaluation of the linear actuator design, including a detailed tolerance analyses, has shown the suitability of this satellite roller screw based mechanism for the actuation of the tested flexible guiding system and compliant connection. The presented development and preliminary testing of the high-precision long-stroke Slit Change Mechanism for the SPICE Instrument are considered fully successful such that future tests considering the full Slit Change Mechanism can be performed, with the gained confidence, directly on a

  15. Normative reference values for the 20 m shuttle‐run test in a population‐based sample of school‐aged youth in Bogota, Colombia: the FUPRECOL study

    Science.gov (United States)

    Palacios‐López, Adalberto; Humberto Prieto‐Benavides, Daniel; Enrique Correa‐Bautista, Jorge; Izquierdo, Mikel; Alonso‐Martínez, Alicia; Lobelo, Felipe

    2016-01-01

    Abstract Objectives Our aim was to determine the normative reference values of cardiorespiratory fitness (CRF) and to establish the proportion of subjects with low CRF suggestive of future cardio‐metabolic risk. Methods A total of 7244 children and adolescents attending public schools in Bogota, Colombia (55.7% girls; age range of 9–17.9 years) participated in this study. We expressed CRF performance as the nearest stage (minute) completed and the estimated peak oxygen consumption (V˙O2peak). Smoothed percentile curves were calculated. In addition, we present the prevalence of low CRF after applying a correction factor to account for the impact of Bogota's altitude (2625 m over sea level) on CRF assessment, and we calculated the number of participants who fell below health‐related FITNESSGRAM cut‐points for low CRF. Results Shuttles and V˙O2peak were higher in boys than in girls in all age groups. In boys, there were higher levels of performance with increasing age, with most gains between the ages of 13 and 17. The proportion of subjects with a low CRF, suggestive of future cardio‐metabolic risk (health risk FITNESSGRAM category) was 31.5% (28.2% for boys and 34.1% for girls; X2 P = .001). After applying a 1.11 altitude correction factor, the overall prevalence of low CRF was 11.5% (9.6% for boys and 13.1% for girls; X2 P = .001). Conclusions Our results provide sex‐ and age‐specific normative reference standards for the 20 m shuttle‐run test and estimated V˙O2peak values in a large, population‐based sample of schoolchildren from a large Latin‐American city at high altitude. PMID:27500986

  16. Preliminary study of novel, timed walking tests for children with spina bifida or cerebral palsy

    Science.gov (United States)

    Kane, Kyra J; Lanovaz, Joel; Bisaro, Derek; Oates, Alison; Musselman, Kristin E

    2016-01-01

    Objective: Walking assessment is an important aspect of rehabilitation practice; yet, clinicians have few psychometrically sound options for evaluating walking in highly ambulatory children. The purpose of this study was to evaluate the validity and reliability of two new measures of walking function—the Obstacles and Curb tests—relative to the 10-Meter Walk test and Timed Up and Go test in children with spina bifida or cerebral palsy. Methods: A total of 16 ambulatory children with spina bifida (n=9) or cerebral palsy (n=7) (9 boys; mean age 7years, 7months; standard deviation 3years, 4months) and 16 age- and gender-matched typically developing children participated. Children completed the walking tests, at both self-selected and fast speeds, twice. To evaluate discriminative validity, scores were compared between typically developing and spina bifida/cerebral palsy groups. Within the spina bifida/cerebral palsy group, inter-test correlations evaluated convergent validity and intraclass correlation coefficients evaluated within-session test–retest reliability. Results: At fast speeds, all tests showed discriminative validity (p<0.006 for typically developing and spina bifida/cerebral palsy comparisons) and convergent validity (rho=0.81–0.90, p⩽0.001, for inter-test correlations). At self-selected speeds, only the Obstacles test discriminated between groups (p=0.001). Moderately strong correlations (rho=0.73–0.78, p⩽0.001) were seen between the 10-Meter Walk test, Curb test, and Timed Up and Go test. Intraclass correlation coefficients ranged from 0.81 to 0.97, with higher test–retest reliability for tests performed at fast speeds rather than self-selected speeds. Conclusion: The Obstacles and Curb tests are promising measures for assessing walking in this population. Performing tests at fast walking speeds may improve their validity and test–retest reliability for children with spina bifida/cerebral palsy. PMID:27493754

  17. Air STAR Beyond Visual Range UAS Description and Preliminary Test Results

    Science.gov (United States)

    Cunningham, Kevin; Cox, David E.; Foster, John V.; Riddick, Stephen E.; Laughter, Sean A.

    2016-01-01

    The NASA Airborne Subscale Transport Aircraft Research Unmanned Aerial System project's capabilities were expanded by updating the system design and concept of operations. The new remotely piloted airplane system design was flight tested to assess integrity and operational readiness of the design to perform flight research. The purpose of the system design is to improve aviation safety by providing a capability to validate, in high-risk conditions, technologies to prevent airplane loss of control. Two principal design requirements were to provide a high degree of reliability and that the new design provide a significant increase in test volume (relative to operations using the previous design). The motivation for increased test volume is to improve test efficiency and allow new test capabilities that were not possible with the previous design and concept of operations. Three successful test flights were conducted from runway 4-22 at NASA Goddard Space Flight Center's Wallops Flight Facility.

  18. Preliminary test results in support of integrated EPP and SMT design methods development

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yanli [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jetter, Robert I. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sham, T. -L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-02-09

    The proposed integrated Elastic Perfectly-Plastic (EPP) and Simplified Model Test (SMT) methodology consists of incorporating a SMT data-based approach for creep-fatigue damage evaluation into the EPP methodology to avoid using the creep-fatigue interaction diagram (the D diagram) and to minimize over-conservatism while properly accounting for localized defects and stress risers. To support the implementation of the proposed code rules and to verify their applicability, a series of thermomechanical tests have been initiated. One test concept, the Simplified Model Test (SMT), takes into account the stress and strain redistribution in real structures by including representative follow-up characteristics in the test specimen. The second test concept is the two-bar thermal ratcheting tests with cyclic loading at high temperatures using specimens representing key features of potential component designs. This report summaries the previous SMT results on Alloy 617, SS316H and SS304H and presents the recent development on SMT approach on Alloy 617. These SMT specimen data are also representative of component loading conditions and have been used as part of the verification of the proposed integrated EPP and SMT design methods development. The previous two-bar thermal ratcheting test results on Alloy 617 and SS316H are also summarized and the new results from two bar thermal ratcheting tests on SS316H at a lower temperature range are reported.

  19. Evaluation of photopatch test allergens for Indian patients of photodermatitis: Preliminary results

    Directory of Open Access Journals (Sweden)

    Nidhi Jindal

    2011-01-01

    Full Text Available Background: There is a strong need to develop a photopatch test tray suitable for Indian patients of photodermatitis as European/Scandinavian photopatch test trays may not be wholly relevant for them. Aim: We carried out this study using photoallergens relevant in the Indian context to determine their relevance in patients of photodermatitis. Methods: Thirty patients (M:F, 23:7 between 19 and 76 years of age of photodermatitis and 10 controls were patch- and photopatch tested with 20 common photoallergens. In addition, the patients were also (photo patch tested with articles of daily use as and when these were suspected to be the cause. Results: Forty-three positive reactions to one or more antigens were seen in 22 (74% patients. Fourteen positive photopatch tests to seven allergens were observed in 10 (33% patients, and nine (30% of them had a definite relevance. The most common contact allergen was fragrance mix (FM (30%, followed by p-phenylenediamine (20% and Parthenium hysterophorous (17%. The definite relevance of the patch- and photopatch tests could be correlated in 47% of these patients. Conclusions: FM is the most common contact and photocontact allergen among the various photopatch test antigens. Although differences in technique and evaluation make direct comparison between different centers difficult, still photopatch testing remains an integral part and gold standard for the work-up of the photosensitive patients.

  20. A Preliminary Analysis of the Linguistic Complexity of Numeracy Skills Test Items for Pre Service Teachers

    Science.gov (United States)

    O'Keeffe, Lisa

    2016-01-01

    Language is frequently discussed as barrier to mathematics word problems. Hence this paper presents the initial findings of a linguistic analysis of numeracy skills test sample items. The theoretical perspective of multi-modal text analysis underpinned this study, in which data was extracted from the ten sample numeracy test items released by the…

  1. Field Test Report: Preliminary Aquifer Test Characterization Results for Well 299-W15-225: Supporting Phase I of the 200-ZP-1 Groundwater Operable Unit Remedial Design

    Energy Technology Data Exchange (ETDEWEB)

    Spane, Frank A.; Newcomer, Darrell R.

    2009-09-23

    This report examines the hydrologic test results for both local vertical profile characterization and large-scale hydrologic tests associated with a new extraction well (well 299-W15-225) that was constructed during FY2009 for inclusion within the future 200-West Area Groundwater Treatment System that is scheduled to go on-line at the end of FY2011. To facilitate the analysis of the large-scale hydrologic test performed at newly constructed extraction well 299-W15-225 (C7017; also referred to as EW-1 in some planning documents), the existing 200-ZP-1 interim pump-and-treat system was completely shut-down ~1 month before the performance of the large-scale hydrologic test. Specifically, this report 1) applies recently developed methods for removing barometric pressure fluctuations from well water-level measurements to enhance the detection of hydrologic test and pump-and-treat system effects at selected monitor wells, 2) analyzes the barometric-corrected well water-level responses for a preliminary determination of large-scale hydraulic properties, and 3) provides an assessment of the vertical distribution of hydraulic conductivity in the vicinity of newly constructed extraction well 299-W15-225. The hydrologic characterization approach presented in this report is expected to have universal application for meeting the characterization needs at other remedial action sites located within unconfined and confined aquifer systems.

  2. Gaseous electron multiplier-based soft x-ray plasma diagnostics development: Preliminary tests at ASDEX Upgrade

    Science.gov (United States)

    Chernyshova, M.; Malinowski, K.; Czarski, T.; Wojeński, A.; Vezinet, D.; Poźniak, K. T.; Kasprowicz, G.; Mazon, D.; Jardin, A.; Herrmann, A.; Kowalska-Strzeciwilk, E.; Krawczyk, R.; Kolasiński, P.; Zabołotny, W.; Zienkiewicz, P.

    2016-11-01

    A Gaseous Electron Multiplier (GEM)-based detector is being developed for soft X-ray diagnostics on tokamaks. Its main goal is to facilitate transport studies of impurities like tungsten. Such studies are very relevant to ITER, where the excessive accumulation of impurities in the plasma core should be avoided. This contribution provides details of the preliminary tests at ASDEX Upgrade (AUG) with a focus on the most important aspects for detector operation in harsh radiation environment. It was shown that both spatially and spectrally resolved data could be collected, in a reasonable agreement with other AUG diagnostics. Contributions to the GEM signal include also hard X-rays, gammas, and neutrons. First simulations of the effect of high-energy photons have helped understanding these contributions.

  3. PHOEBUS/UHTREX: a preliminary study of a low-cost facility for transient tests of LMFBR fuel

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, W.L. (comp.)

    1976-08-01

    The results of a brief preliminary design study of a facility for transient nuclear tests of fast breeder reactor fuel are described. The study is based on the use of a reactor building originally built for the UHTREX reactor, and the use of some reactor hardware and reactor design and fabrication technology remaining from the Phoebus-2 reactor of the Rover nulcear rocket propulsion program. The facility is therefore currently identified as the PHOEBUS/UHTREX facility. This facility is believed capable of providing early information regarding fast reactor core accident energetics issues which will be very valuable to the overall LMFBR safety program. Facility performance in conjunction with a reference 127-fuel pin experiment is described. Low cost and early availability of the facility were emphasized in the selection of design features and parameters.

  4. Design and preliminary test results of the 40 MW power supply at the National High Magnetic Field Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Boenig, H.J. [Los Alamos National Lab., NM (United States); Bogdan, F.; Morris, G.C. [ABB Drives Inc., New Berlin, WI (United States); Ferner, J.A.; Schneider-Muntau, H.J. [National High Magnetic Field Lab., Tallahassee, FL (United States); Rumrill, R.H.; Rumrill, R.S. [Alpha Scientific Electronics Inc., Hayward, CA (United States)

    1993-11-01

    Four highly stabilized, steady-state, 10 MW power supplies have been installed at the National High Magnetic Field Laboratory in Tallahassee, FL. Each supply consists of a 12.5 kV vacuum circuit breaker, two three-winding, step-down transformers, a 24-pulse rectifier with interphase reactors and freewheeling diodes, and a passive and an active filter. Two different transformer tap settings allow dc supply output voltages of 400 and 500 V. The rated current of a supply is 17 kA and each supply has a one hour overload capability of 20 kA. The power supply output bus system, including a reversing switch at the input and 2 {times} 16 disconnect switches at the output, connects each supply to 16 different magnet cells. The design of the power supply is described and preliminary test results with a supply feeding a 10 MW resistive load are presented.

  5. Gaseous electron multiplier-based soft x-ray plasma diagnostics development: Preliminary tests at ASDEX Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Chernyshova, M., E-mail: maryna.chernyshova@ipplm.pl; Malinowski, K.; Czarski, T.; Kowalska-Strzęciwilk, E. [Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw (Poland); Wojeński, A.; Poźniak, K. T.; Kasprowicz, G.; Krawczyk, R.; Kolasiński, P.; Zabołotny, W.; Zienkiewicz, P. [Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw (Poland); Vezinet, D.; Herrmann, A. [Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching (Germany); Mazon, D.; Jardin, A. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France)

    2016-11-15

    A Gaseous Electron Multiplier (GEM)-based detector is being developed for soft X-ray diagnostics on tokamaks. Its main goal is to facilitate transport studies of impurities like tungsten. Such studies are very relevant to ITER, where the excessive accumulation of impurities in the plasma core should be avoided. This contribution provides details of the preliminary tests at ASDEX Upgrade (AUG) with a focus on the most important aspects for detector operation in harsh radiation environment. It was shown that both spatially and spectrally resolved data could be collected, in a reasonable agreement with other AUG diagnostics. Contributions to the GEM signal include also hard X-rays, gammas, and neutrons. First simulations of the effect of high-energy photons have helped understanding these contributions.

  6. Biomechanics of Distance Running.

    Science.gov (United States)

    Cavanagh, Peter R., Ed.

    Contributions from researchers in the field of running mechanics are included in the 13 chapters of this book. The following topics are covered: (1) "The Mechanics of Distance Running: A Historical Perspective" (Peter Cavanagh); (2) "Stride Length in Distance Running: Velocity, Body Dimensions, and Added Mass Effects" (Peter Cavanagh, Rodger…

  7. Successful micronucleus testing with the EPI/001 3D reconstructed epidermis model: preliminary findings.

    Science.gov (United States)

    Andres, E; Molinari, J; Remoué, N; Sá-Rocha, V M; Barrichello, C; Hurtado, S P

    2012-03-18

    Currently, the cosmetics industry relies on the results of in vitro genotoxicity tests to assess the safety of chemicals. Although the cytokinesis-block micronucleus (CBMN) test for the detection of cells that have divided once is routinely used and currently accepted by regulatory agencies, it has some limitations. Reconstituted human epidermis (RHE) is widely used in safety assessments because its physiological properties resemble those of the skin, and because it allows testing of substances such as hydrophobic compounds. Thus, the micronucleus test is being adapted for application in RHE-reconstructed tissues. Here we investigated whether two different reconstructed epidermis models (EPI/001 from Straticell, and RHE/S/17 from Skinethic) are suitable for application of the micronucleus test. We found that acetone does not modify micronucleus frequency, cell viability, and model structure, compared with non-treated RHE. Treatment of the EPI/001 model with mitomycin C and vinblastine resulted in a dose-dependent increase of micronucleus frequency as well as a decrease of tissue viability and of binucleated cell rate, while no changes of the epidermal structure were observed. The number of binucleated cells obtained with the RHE/S/17 model was too small to permit micronucleus testing. These results indicate that the proliferative rate of the tissue used is a critical parameter in performing the micronucleus test on a 3D model.

  8. Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design.

    Science.gov (United States)

    Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

    2015-02-28

    The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms.

  9. First Total Reflection X-Ray Fluorescence round-robin test of water samples: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Borgese, Laura; Bilo, Fabjola [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy); Tsuji, Kouichi [Graduate School of Engineering, Osaka City University, Osaka (Japan); Fernández-Ruiz, Ramón [Servicio Interdepartamental de Investigación (SIdI), Laboratorio de TXRF, Universidad Autónoma de Madrid, Madrid (Spain); Margui, Eva [Department of Chemistry, University of Girona, Girona (Spain); Streli, Christina [TU Wien, Atominstitut,Radiation Physics, Vienna (Austria); Pepponi, Giancarlo [Fondazione Bruno Kessler, Povo, Trento (Italy); Stosnach, Hagen [Bruker Nano GmbH, Berlin (Germany); Yamada, Takashi [Rigaku Corporation, Takatsuki, Osaka (Japan); Vandenabeele, Peter [Department of Archaeology, Ghent University, Ghent (Belgium); Maina, David M.; Gatari, Michael [Institute of Nuclear Science and Technology, University of Nairobi, Nairobi (Kenya); Shepherd, Keith D.; Towett, Erick K. [World Agroforestry Centre (ICRAF), Nairobi (Kenya); Bennun, Leonardo [Laboratorio de Física Aplicada, Departamento de Física, Universidad de Concepción (Chile); Custo, Graciela; Vasquez, Cristina [Gerencia Química, Laboratorio B025, Centro Atómico Constituyentes, San Martín (Argentina); Depero, Laura E., E-mail: laura.depero@unibs.it [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy)

    2014-11-01

    Total Reflection X-Ray Fluorescence (TXRF) is a mature technique to evaluate quantitatively the elemental composition of liquid samples deposited on clean and well polished reflectors. In this paper the results of the first worldwide TXRF round-robin test of water samples, involving 18 laboratories in 10 countries are presented and discussed. The test was performed within the framework of the VAMAS project, interlaboratory comparison of TXRF spectroscopy for environmental analysis, whose aim is to develop guidelines and a standard methodology for biological and environmental analysis by means of the TXRF analytical technique. - Highlights: • The discussion of the first worldwide TXRF round-robin test of water samples (18 laboratories of 10 countries) is reported. • Drinking, waste, and desalinated water samples were tested. • Data dispersion sources were identified: sample concentration, preparation, fitting procedure, and quantification. • The protocol for TXRF analysis of drinking water is proposed.

  10. Uniaxial strength testing of Calico Hills tuff, Yucca Mountain: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Li, Qizhi; Schultz, R.A. [Univ. of Nevada, Reno, NV (United States)

    1994-12-31

    A detailed investigation of the strength properties of Calico Hills tuff was undertaken to further characterize the behavior of this unit. Uniaxial compression test on 47 samples of massive and reworked tuff show a dependence of peak strength and Young`s modulus on the total porosity, and thus on the geologic history of the Calico Hills tuff. Controlled deformation of test specimens documents axial splitting and faulting as failure mechanisms in the post-peak region of these brittle tuffs.

  11. Factors associated with medical student test anxiety in objective structured clinical examinations: a preliminary study

    Science.gov (United States)

    2016-01-01

    Objectives To investigate attributes of medical students associated with their test anxiety on Objective Structured Clinical Examinations (OSCEs). Methods A cross-sectional study using a self-administered questionnaire was conducted of all Year 3 and 4 students at a private medical school in South Korea in 2014. This 53-item questionnaire consisted of factors pertaining to test anxiety on the OSCE identified from a review of relevant literature, which included students’ motivational beliefs and achievement emotions, perceived values of the OSCE, and attitude and orientation towards patients. Participants’ test anxiety levels were measured using the Korean Achievement Emotions Questionnaire. Participants rated their responses using a five-point Likert-type scale. Univariate analysis was performed to examine relationships between the variables. Results A total of 94 students completed the questionnaire (a 93% response rate). No differences in the participants’ test anxiety scores were observed across genders, entry-levels, or years in medical school. Participants’ test anxiety on the OSCE showed moderate association with their class-related achievement emotions (i.e., anxiety and boredom), where r = 0.46 and 0.32, p OSCE (r = -0.21, p OSCE. These findings have implications for developing effective educational interventions for helping students cope with such a stress by enhancing our understanding of the various factors that influence their test anxiety in OSCEs. PMID:28035056

  12. Factors associated with medical student test anxiety in objective structured clinical examinations: a preliminary study.

    Science.gov (United States)

    Kim, Kyong-Jee

    2016-12-29

    To investigate attributes of medical students associated with their test anxiety on Objective Structured Clinical Examinations (OSCEs). A cross-sectional study using a self-administered questionnaire was conducted of all Year 3 and 4 students at a private medical school in South Korea in 2014. This 53-item questionnaire consisted of factors pertaining to test anxiety on the OSCE identified from a review of relevant literature, which included students' motivational beliefs and achievement emotions, perceived values of the OSCE, and attitude and orientation towards patients. Participants' test anxiety levels were measured using the Korean Achievement Emotions Questionnaire. Participants rated their responses using a five-point Likert-type scale. Univariate analysis was performed to examine relationships between the variables. A total of 94 students completed the questionnaire (a 93% response rate). No differences in the participants' test anxiety scores were observed across genders, entry-levels, or years in medical school. Participants' test anxiety on the OSCE showed moderate association with their class-related achievement emotions (i.e., anxiety and boredom), where r = 0.46 and 0.32, p anxiety on the OSCE. These findings have implications for developing effective educational interventions for helping students cope with such a stress by enhancing our understanding of the various factors that influence their test anxiety in OSCEs.

  13. Engineering, Manufacture and Preliminary Testing of the ITER Toroidal Field (TF) Magnet Helium Cold Circulator

    Science.gov (United States)

    Rista, P. E. C.; Shull, J.; Sargent, S.

    2015-12-01

    The ITER cryodistribution system provides the supercritical Helium (SHe) forced flow cooling to the magnet system using cold circulators. The cold circulators are located in each of five separate auxiliary cold boxes planned for use in the facility. Barber-Nichols Inc. has been awarded a contract from ITER-India for engineering, manufacture and testing of the Toroidal Field (TF) Magnet Helium Cold Circulator. The cold circulator will be extensively tested at Barber-Nichols’ facility prior to delivery for qualification testing at the Japan Atomic Energy Agency's (JAEA) test facility at Naka, Japan. The TF Cold Circulator integrates features and technical requirements which Barber-Nichols has utilized when supplying helium cold circulators worldwide over a period of 35 years. Features include a vacuum-jacketed hermetically sealed design with a very low helium leak rate, a heat shield for use with both nitrogen & helium cold sources, a broad operating range with a guaranteed isentropic efficiency over 70%, and impeller design features for high efficiency. The cold circulator will be designed to meet MTBM of 17,500 hours and MTBF of 36,000 hours. Vibration and speed monitoring are integrated into a compact package on the rotating assembly with operation and health monitoring in a multi-drop PROFIBUS communication environment using an electrical cabinet with critical features and full local and network PLC interface and control. For the testing in Japan and eventual installation in Europe, the cold circulator must be certified to the Japanese High Pressure Gas Safety Act (JHPGSA) and CE marked in compliance with the European Pressure Equipment Directive (PED) including Essential Safety Requirements (ESR). The test methodology utilized at Barber-Nichols’ facility and the resulting test data, validating the high efficiency of the TF Cold Circulator across a broad operating range, are important features of this paper.

  14. Preliminary Feed Test Algorithm for the Hanford Waste Vitrification Plant product composition control system

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, M.F.; Piepel, G.F.

    1996-03-01

    The Feed Test Algorithm (FTA) will test the acceptability (conformance with requirements) of process batches in the Hanford Waste Vitrification Plant (HWVP). Although requirements and constraints will be imposed on properties of the material in the melter and the resulting glass, the FTA must test acceptability while the batch is still in the Slurry Mix Evaporator (SME), i.e., before material is transferred to the Melter Feed Tank. Hence, some properties upon which requirements will be imposed must be estimated from data available on the feed slurry. The major type of data to be used in this estimation is feed composition, usually expressed in terms of nine oxide mass fractions and a catchall tenth category, Others. Uncertainties are inherent in the HWVP process. The two major or types of uncertainty are composition uncertainty (that related to measurement and estimation of feed composition and other quantities) and model uncertainty (uncertainty inherent in the models developed to relate melt/glass properties to feed composition). Types of uncertainties, representation of uncertainty, and a method for combining uncertainties are discussed. The FTA must account for these uncertainties in testing acceptability; hence it must be statistical in nature. Three types of statistical intervals (confidence, prediction, and tolerance) are defined, and their roles in acceptance testing are discussed.

  15. Autologous serum skin test reactivity and basophil histamine release test in patients with nasal polyposis: preliminary results.

    Science.gov (United States)

    Zambetti, G; Ciofalo, A; Soldo, P; Fusconi, M; Romeo, R; Greco, A; Altissimi, G; Macri, G F; Marinelli, C; Pagliuca, G; De Vincentiis, M

    2010-01-01

    An eosinophilic inflammatory process is generally observed in patients suffering from nasal polyposis (NP), however its onset has not yet been defined. It has been suggested that immune activation of inflammatory cells may be the cause. The aim of this study is to verify whether autoantibodies and/or histamine-releasing factors are present in the serum of patients suffering from NP. In fact, we assume that autoantibodies and/or histamine-releasing factors, as already demonstrated in chronic idiopathic urticaria and asthma, may be involved in the pathogenesis of NP. In this case-control analytical study 40 patients with NP and 27 control subjects underwent the in vivo autologous serum skin test (ASST). The sera from 6 patients suffering from NP and 9 control group subjects, who had all been previously studied and randomly selected, underwent basophil histamine release assay from normal donor as a pilot study. The ASST showed positive results in 55% of patients suffering from NP versus 8% of the control group (p= .00006), the basophil histamine release test (BHRT) turned out positive in all patients tested and in 11% of the control group. We found a weak positive correlation between the percentage of histamine release and the wheal diameter. ASST reactivity is very frequent in patients suffering from NP, thus suggesting the presence of histamine-releasing factors in the blood stream. The BHRT was positive in the serum of all patients, thus suggesting the presence of anti-FcepsilonRI, anti-IgE autoantibodies and/or other histamine-releasing factors, the presence of which can play a role in triggering and maintaining the eosinophilic inflammatory process in NP.

  16. Preliminary Tests For Development Of A Non-Pertechnetate Analysis Method

    Energy Technology Data Exchange (ETDEWEB)

    Diprete, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-28

    The objective of this task was to develop a non-pertechnetate analysis method that 222-S lab could easily implement. The initial scope involved working with 222-S laboratory personnel to adapt the existing Tc analytical method to fractionate the non-pertechnetate and pertechnetate. SRNL then developed and tested a method using commercial sorbents containing Aliquat® 336 to extract the pertechnetate (thereby separating it from non-pertechnetate), followed by oxidation, extraction, and stripping steps, and finally analysis by beta counting and Mass Spectroscopy. Several additional items were partially investigated, including impacts of a 137Cs removal step. The method was initially tested on SRS tank waste samples to determine its viability. Although SRS tank waste does not contain non-pertechnetate, testing with it was useful to investigate the compatibility, separation efficiency, interference removal efficacy, and method sensitivity.

  17. Preliminary Tests For Development Of A Non-Pertechnetate Analysis Method

    Energy Technology Data Exchange (ETDEWEB)

    Diprete, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-28

    The objective of this task was to develop a non-pertechnetate analysis method that 222-S lab could easily implement. The initial scope involved working with 222-S laboratory personnel to adapt the existing Tc analytical method to fractionate the non-pertechnetate and pertechnetate. SRNL then developed and tested amethod using commercial sorbents containing Aliquat® 336 to extract the pertechnetate (thereby separating it from non-pertechnetate), followed by oxidation, extraction, and stripping steps, and finally analysis by beta counting and Mass Spectroscopy. Several additional items were partially investigated, including impacts of a 137Cs removal step. The method was initially tested on SRS tank waste samples to determine its viability. Although SRS tank waste does not contain non-pertechnetate, testing with it was useful to investigate the compatibility, separation efficiency, interference removal efficacy, and method sensitivity.

  18. PRELIMINARY TEST RESULTS OF A PROTOTYPE FAST KICKER FOR APS MBA UPGRADE

    Energy Technology Data Exchange (ETDEWEB)

    Yao, C.-Y.; Morrison, L.; Sun, X.; Wang, J.; Cours, A.; Westferro, F.; Xiao, A.; Clute, T.; Conway, Z.; Decker, G.; Lenkszus, F.; Carwardine, J.; Barcikowski, A.; Keane, R.; Brill, A.

    2017-06-25

    The APS multi-bend achromatic (MBA) upgrade storage ring plans to support two bunch fill patterns: a 48-bunch and a 324-bunch. A “swap out” injection scheme is required. In order to provide the required kick to injected beam, to minimize the beam loss and residual oscillation of injected beam, and to minimize the perturbation to stored beam during injection, the rise, fall, and flat-top parts of the kicker pulse must be within a 16.9-ns interval. Stripline-type kickers are chosen for both injection and extraction. We developed a prototype kicker that supports a ±15kV differential pulse voltage. We performed high voltage discharge, TDR measurement, high voltage pulse test and beam test of the kicker. We report the final design of the fast kicker and the test results.

  19. Preliminary laboratory testing on the sound absorption of coupled cavity sonic crystal

    Science.gov (United States)

    Kristiani, R.; Yahya, I.; Harjana; Suparmi

    2016-11-01

    This paper focuses on the sound absorption performance of coupled cavity sonic crystal. It constructed by a pair of a cylindrical tube with different values in diameters. A laboratory test procedure after ASTM E1050 has been conducted to measure the sound absorption of the sonic crystal elements. The test procedures were implemented to a single coupled scatterer and also to a pair of similar structure. The results showed that using the paired structure bring a better possibility for increase the sound absorption to a wider absorption range. It also bring a practical advantage for setting the local Helmholtz resonant frequency to certain intended frequency.

  20. First Total Reflection X-Ray Fluorescence round-robin test of water samples: Preliminary results

    Science.gov (United States)

    Borgese, Laura; Bilo, Fabjola; Tsuji, Kouichi; Fernández-Ruiz, Ramón; Margui, Eva; Streli, Christina; Pepponi, Giancarlo; Stosnach, Hagen; Yamada, Takashi; Vandenabeele, Peter; Maina, David M.; Gatari, Michael; Shepherd, Keith D.; Towett, Erick K.; Bennun, Leonardo; Custo, Graciela; Vasquez, Cristina; Depero, Laura E.

    2014-11-01

    Total Reflection X-Ray Fluorescence (TXRF) is a mature technique to evaluate quantitatively the elemental composition of liquid samples deposited on clean and well polished reflectors. In this paper the results of the first worldwide TXRF round-robin test of water samples, involving 18 laboratories in 10 countries are presented and discussed. The test was performed within the framework of the VAMAS project, interlaboratory comparison of TXRF spectroscopy for environmental analysis, whose aim is to develop guidelines and a standard methodology for biological and environmental analysis by means of the TXRF analytical technique.

  1. The Effect of Training in Minimalist Running Shoes on Running Economy.

    Science.gov (United States)

    Ridge, Sarah T; Standifird, Tyler; Rivera, Jessica; Johnson, A Wayne; Mitchell, Ulrike; Hunter, Iain

    2015-09-01

    The purpose of this study was to examine the effect of minimalist running shoes on oxygen uptake during running before and after a 10-week transition from traditional to minimalist running shoes. Twenty-five recreational runners (no previous experience in minimalist running shoes) participated in submaximal VO2 testing at a self-selected pace while wearing traditional and minimalist running shoes. Ten of the 25 runners gradually transitioned to minimalist running shoes over 10 weeks (experimental group), while the other 15 maintained their typical training regimen (control group). All participants repeated submaximal VO2 testing at the end of 10 weeks. Testing included a 3 minute warm-up, 3 minutes of running in the first pair of shoes, and 3 minutes of running in the second pair of shoes. Shoe order was randomized. Average oxygen uptake was calculated during the last minute of running in each condition. The average change from pre- to post-training for the control group during testing in traditional and minimalist shoes was an improvement of 3.1 ± 15.2% and 2.8 ± 16.2%, respectively. The average change from pre- to post-training for the experimental group during testing in traditional and minimalist shoes was an improvement of 8.4 ± 7.2% and 10.4 ± 6.9%, respectively. Data were analyzed using a 2-way repeated measures ANOVA. There were no significant interaction effects, but the overall improvement in running economy across time (6.15%) was significant (p = 0.015). Running in minimalist running shoes improves running economy in experienced, traditionally shod runners, but not significantly more than when running in traditional running shoes. Improvement in running economy in both groups, regardless of shoe type, may have been due to compliance with training over the 10-week study period and/or familiarity with testing procedures. Key pointsRunning in minimalist footwear did not result in a change in running economy compared to running in traditional footwear

  2. High Temperature Test Facility Preliminary RELAP5-3D Input Model Description

    Energy Technology Data Exchange (ETDEWEB)

    Bayless, Paul David [Idaho National Laboratory

    2015-12-01

    A RELAP5-3D input model is being developed for the High Temperature Test Facility at Oregon State University. The current model is described in detail. Further refinements will be made to the model as final as-built drawings are released and when system characterization data are available for benchmarking the input model.

  3. Preliminary experimental results from the ICARUS test facility at INFN-LNL

    Energy Technology Data Exchange (ETDEWEB)

    Varanini, F. [Dept. of Physics and INFN, University of Padova, via Marzolo 8, 35100 Padova (Italy)

    2009-12-15

    A liquid Argon TPC with a sensitive volume of 27 l has been operated with cosmic rays in the INFN-LNL laboratories. This detector is used to test possible DAQ and trigger solutions for ICARUS and future liquid Argon TPCs.

  4. High Temperature Steam Electrolysis Materials Degradation: Preliminary Results of Corrosion Tests on Ceramatec Electrolysis Cell Components

    Energy Technology Data Exchange (ETDEWEB)

    Paul Demkowicz; Prateek Sachdev; Kevin DeWall; Pavel Medvedev

    2007-06-01

    Corrosion tests were performed on stainless steel and nickel alloy coupons in H2O/H2 mixtures and dry air to simulate conditions experienced in high temperature steam electrolysis systems. The stainless steel coupons were tested bare and with one of three different proprietary coatings applied. Specimens were corroded at 850°C for 500 h with weight gain data recorded at periodic intervals. Post-test characterization of the samples included surface and cross-section scanning electron microscopy, grazing incidence x-ray diffraction, and area-specific resistance measurements. The uncoated nickel alloy outperformed the ferritic stainless steel under all test conditions based on weight gain data. Parabolic rate constants for corrosion of these two uncoated alloys were consistent with values presented in the literature under similar conditions. The steel coatings reduced corrosion rates in H2O/H2 mixtures by as much as 50% compared to the untreated steel, but in most cases showed negligible corrosion improvement in air. The use of a rare-earth-based coating on stainless steel did not result in a significantly different area specific resistance values after corrosion compared to the untreated alloy. Characterization of the samples is still in progress and the findings will be revised when the complete data set is available.

  5. Preliminary report on engineering geology of thirteen tunnel sites, Nevada Test Site

    Science.gov (United States)

    Wilmarth, Verl Richard; McKeown, Francis Alexander; Dobrovolny, Ernest

    1958-01-01

    Reconnaissance of 13 areas in and adjacent to Nevada Test Site was completed. Of the 13 areas, Forty Mile Canyon, South-central Shoshone Mountain, and Southeast Shoshone Mountain named in order of preference, offer many advantages for carrying on future underground nuclear explosions.

  6. A preliminary neutronic evaluation of high temperature engineering test reactor using the SCALE6 code

    Science.gov (United States)

    Tanure, L. P. A. R.; Sousa, R. V.; Costa, D. F.; Cardoso, F.; Veloso, M. A. F.; Pereira, C.

    2014-02-01

    Neutronic parameters of some fourth generation nuclear reactors have been investigated at the Departamento de Engenharia Nuclear/UFMG. Previous studies show the possibility to increase the transmutation capabilities of these fourth generation systems to achieve significant reduction concerning transuranic elements in spent fuel. To validate the studies, a benchmark on core physics analysis, related to initial testing of the High Temperature Engineering Test Reactor and provided by International Atomic Energy Agency (IAEA) was simulated using the Standardized Computer Analysis for Licensing Evaluation (SCALE). The CSAS6/KENO-VI control sequence and the 44-group ENDF/B-V 0 cross-section neutron library were used to evaluate the keff (effective multiplication factor) and the result presents good agreement with experimental value.

  7. Preliminary results on performance testing of a turbocharged rotary combustion engine

    Science.gov (United States)

    Meng, P. R.; Rice, W. J.; Schock, H. J.; Pringle, D. P.

    1982-01-01

    The performance of a turbocharged rotary engine at power levels above 75 kW (100 hp) was studied. A twin rotor turbocharged Mazda engine was tested at speeds of 3000 to 6000 rpm and boost pressures to 7 psi. The NASA developed combustion diagnostic instrumentation was used to quantify indicated and pumping mean effect pressures, peak pressure, and face to face variability on a cycle by cycle basis. Results of this testing showed that a 5900 rpm a 36 percent increase in power was obtained by operating the engine in the turbocharged configuration. When operating with lean carburetor jets at 105 hp (78.3 kW) and 4000 rpm, a brake specific fuel consumption of 0.45 lbm/lb-hr was measured.

  8. F-111 Adhesively Bonded Repair Assessment Program (FABRAP) - Phase 1 Testing, Preliminary Results

    Science.gov (United States)

    2011-08-01

    UNCLASSIFIED 4 UNCLASSIFED DSTO-TN-1024  aircraft that have been reserved for other use such as museum displays. Negotiations are underway to test...additional hazards when used outside of a fume cupboard/booth. Citrasafe is a non-toxic low volatile plant extract solvent which has been shown to be...work during hayfever seasons may expose workers to pollen allergens. Staff with known allergies will be advised to prepare by using

  9. Mastitis diagnosis in dairy goats through somatic cell counts and California mastitis test. Preliminary results

    OpenAIRE

    Mendonça, Álvaro; Valentim, Ramiro; Nunes, Manuel; Correia, Teresa Montenegro; Trigo, Margarida; Maurício, Raimundo; Costa, Cristina; Coelho, Alípio

    2004-01-01

    The aim of this work was to evaluate somatic cell count (SCC) and Californian mastitis test (CMT) reliability as methods to survey mastitis in Serrana goats. Microbiological diagnosis, SCC and CTM were performed on 2028 samples, collected from individual glands during a lactation period. According to results CMT (predictive negative value = 69.5%) may be used as a cheap and practical method for sub clinical mastitis survey in Serrana goats. Decision on SCC use will depend on additional resear...

  10. [Preliminary Study on Error Control of Medical Devices Test Reports Based on the Analytic Hierarchy Process].

    Science.gov (United States)

    Huang, Yanhong; Xu, Honglei; Tu, Rong; Zhang, Xu; Huang, Min

    2016-01-01

    In this paper, the common errors in medical devices test reports are classified and analyzed. And then the main 11 influence factors for these inspection report errors are summarized. The hierarchy model was also developed and verified by presentation data using MATLAB. The feasibility of comprehensive weights quantitative comparison has been analyzed by using the analytic hierarchy process. In the end, this paper porspects the further research direction.

  11. New method for rapid Susceptibility Testing on blood culture with HB&L system: preliminary data

    Directory of Open Access Journals (Sweden)

    Vincenzo Rondinelli

    2010-12-01

    Full Text Available Blood culture, although represents the gold standard in detecting the ethiological agent of sepsis, is rather rarely required in relation to the real diagnostic importance. The result of this test depends in fact on many factors (sample volume, time of collection, accuracy, antibiotic therapy, contamination, number of drawings, drawing site, interpretation difficulties, etc. that are often considered by many clinicians so limited as to doubt about their actual value. The disadvantages are therefore represented by the lack of standardization but also by the low sensitivity and above all by the technical times too long for the clinical needs. Blood culture begins with the drawing of samples from the “septic” patient followed incubation of the bottles in automatic thermostated systems. In case of positive result (36 hours, the culture is Gram stained and streaked on solid media in order to obtain isolated colonies for the identification and the susceptibility testing (48 hours from positive result. The long time required for pathogen identification and susceptibility testing involves empirical broad spectrum antibiotic therapy that can promote the increase of bacterial resistance but also patient management costs. A clinically useful report should be available on short notice in order to guide the clinician to choose the most appropriate antibiotic. The microbiologist has therefore the hard work of reviewing the organization and the management of the procedures.We have therefore started to consider the possibility of treating the blood as an biological liquid in order to quickly determine the susceptibility of bacteria to antibiotics.

  12. Preliminary Benchmark Evaluation of Japan’s High Temperature Engineering Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    John Darrell Bess

    2009-05-01

    A benchmark model of the initial fully-loaded start-up core critical of Japan’s High Temperature Engineering Test Reactor (HTTR) was developed to provide data in support of ongoing validation efforts of the Very High Temperature Reactor Program using publicly available resources. The HTTR is a 30 MWt test reactor utilizing graphite moderation, helium coolant, and prismatic TRISO fuel. The benchmark was modeled using MCNP5 with various neutron cross-section libraries. An uncertainty evaluation was performed by perturbing the benchmark model and comparing the resultant eigenvalues. The calculated eigenvalues are approximately 2-3% greater than expected with an uncertainty of ±0.70%. The primary sources of uncertainty are the impurities in the core and reflector graphite. The release of additional HTTR data could effectively reduce the benchmark model uncertainties and bias. Sensitivity of the results to the graphite impurity content might imply that further evaluation of the graphite content could significantly improve calculated results. Proper characterization of graphite for future Next Generation Nuclear Power reactor designs will improve computational modeling capabilities. Current benchmarking activities include evaluation of the annular HTTR cores and assessment of the remaining start-up core physics experiments, including reactivity effects, reactivity coefficient, and reaction-rate distribution measurements. Long term benchmarking goals might include analyses of the hot zero-power critical, rise-to-power tests, and other irradiation, safety, and technical evaluations performed with the HTTR.

  13. Preliminary study of Internet addiction and cognitive function in adolescents based on IQ tests.

    Science.gov (United States)

    Park, Min-Hyeon; Park, E-Jin; Choi, Jeewook; Chai, Sukhi; Lee, Ji-Han; Lee, Chul; Kim, Dai-Jin

    2011-12-30

    The potential relationship between Internet addiction and certain cognitive function problems has been suggested by several studies. However, few or no studies have examined the differences in cognitive functioning between persons addicted to the Internet and persons not addicted using a standard neuropsychological test. This study screened 253 middle school students and 389 high school students for Internet addiction and compared 59 Internet-addicted students with 43 non-addicted students using an IQ test. The Internet-addicted group had comprehension sub-item scores that were significantly lower than those of the non-addicted group. As the comprehension item reflects ethical judgement and reality testing, there may be a relationship between Internet addiction and weak social intelligence. Earlier onset of Internet addiction and longer addiction duration were associated with lower participant performance in areas related to attention. As this study is a cross-sectional study, it is not clear whether the persons who display weak cognitive functioning are susceptible to Internet addiction or if Internet addiction causes cognitive problems. However, as brain development remains active during adolescence, the possibility that Internet addiction adversely affects the cognitive functioning of adolescents cannot be ruled out.

  14. Establishment and Preliminary Application of a Rapid Fluorescent Focus Inhibition Test (RFFIT) for Rabies Virus

    Institute of Scientific and Technical Information of China (English)

    Pengcheng Yu; Xinjun Lv; Xinxin Shen; Qing Tang; Guodong Liang

    2013-01-01

    The World Health Organization (WHO) standard assay for determining levels of the rabies virus neutralization antibody (RVNA) is the rapid fluorescent focus inhibition test (RFFIT),which is used to evaluate the immunity effect after vaccination against rabies.For RFFIT,CVS-11 was used as the challenge virus,BSR cells as the adapted cells,and WHO rabies immunoglobulin (WHO STD) as the reference serum in this study.With reference to WHO and Pasteur RFFIT procedures,a micro-RFFIT procedure adapted to our laboratory was produced,and its specificity and reproducibility were tested.We tested levels of RVNA in human serum samples after immunization with different human rabies vaccines (domestic purified Vero cell rabies vaccine (PVRV) and imported purified chick embryo cell vaccine (PCECV)) using different regimens (Zagreb regimen and Essen regimen).We analyzed the levels of RVNA,and compared the immune efficacy of domestic PVRV and imported PCECV using different immunization regimens.The results showed that the immune efficacy of domestic PVRV using the Zagreb regimen was as good as that of the imported PCECV,but virus antibodies were generated more rapidly with the Zagreb regimen than with the Essen regimen.The RFFIT procedure established in our laboratory will enhance the comprehensive detection ability of institutions involved in rabies surveillance in China.

  15. New sonographically-guided test for anterior knee instability – preliminary report

    Directory of Open Access Journals (Sweden)

    Piotr Grzelak

    2014-09-01

    Full Text Available Aim of the study: Ultrasound examination is widely used in orthopedic diagnostics, however sonographic evaluation of traumatic anterior cruciate ligament insufficiency is still inadequate. Aim of this study is to evaluate diagnostic capability of a new sonographicallyguided test for diagnosing complete anterior cruciate ligament insufficiency. Material and methods: In 47 patients, with suspicion of unilateral anterior cruciate ligament injury (based on magnetic resonance imaging, the sonographically-guided test for anterior instability was performed. The translation of the intercondylar eminence against the patellar tendon was measured in both knees. Afterwards all patients underwent arthroscopy. Results: In 37 patients, with arthroscopically confirmed complete anterior cruciate ligament insufficiency, the mean anterior knee translation was 8.3 mm (SD = 2.8 in affected knee vs. 3 mm (SD = 1.1 in uninjured knee (p < 0.001. In 10 patients with no anterior cruciate ligament insufficiency the difference between body sides was not significant (2.6 mm, SD = 1.4 in injured knee vs. 2.5 mm, SD = 1.1 in uninjured joint; p < 0.7753. Conclusions: The proposed test supports the clinician with fast and noninvasive examination that can facilitate evaluation of anterior knee instability.

  16. Preliminary Results from the Joint Russian and US Field Test: Measurement of Sensorimotor and Cardiovascular Responses Immediately Following Landing of the Soyuz Spacecraft

    Science.gov (United States)

    Reschke, M. F.; Kozlovskaya, I. B.; Tomilovskaya, E. S.; Bloomberg, J. J.; Platts, S. H.; Rukavishnikov, I. V.; Fomina, E. V.; Stenger, M. B.; Lee, S. M. C.; Wood, S. J.; Mulavara, A. P.; Fieveson, A. H.; Cerisano, J. M.; Kofman, I. S.; Fisher, E. A.

    2013-01-01

    Ongoing collaborative research efforts between NASA's Neuroscience and Cardiovascular Laboratories, and the Institute of Biomedical Problems' (IBMP) Sensory-Motor and Countermeasures Laboratories have been measuring functional sensorimotor, cardiovascular and strength responses following bed rest, dry immersion, short duration (Space Shuttle) and long duration (Mir and International Space Station) space flights. While the unloading paradigms associated with dry immersion and bed rest have do serve as acceptable flight analogs, testing of crew responses following the long duration flights does not begin until a minimum of 24 hours after landing. As a result it is not possible to estimate the nonlinear trend of the early (assess the full impact of the decrements associated with long duration flight. To overcome these limitations both the Russian and U.S. sides have implemented testing at the time of landing and before the flight crews have left the landing site. By joint agreement this research effort has been identified as the functional Field Test (FT). For practical reasons the FT has been divided into two phases: the full FT and a preliminary pilot version (PFT) of the FT that is reduced in both length and scope. The primary goal of this research is to determine functional abilities in long duration space flight crews beginning as soon after landing as possible (assessment of hand/eye coordination, ability to egress from a seated position, walk normally without falling, measurement of dynamic visual acuity, ability to discriminate different forces generated with both the hands and legs, recovery from a fall, a coordinated walk involving tandem heel-to-toe placement and determination of postural ataxia while standing. The cardiovascular portion of the investigation includes blood pressure and heart rate measurements during a timed stand test in conjunction with postural ataxia testing. In addition to the immediate post-landing collection of data for the full FT

  17. An irradiation test of heat-resistant ceramic composite materials. Interim report on post-irradiation examinations of the first preliminary irradiation test: 97M-13A

    Energy Technology Data Exchange (ETDEWEB)

    Baba, Shin-ichi; Takahashi, Tsuneo; Ishihara, Masahiro; Hayashi, Kimio; Sozawa, Shizuo; Saito, Takashi [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Suzuki, Yoshio [Nuclear Engineering, Co. Ltd., Osaka (Japan); Saito, Tamotsu; Sekino, Hajime [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-03-01

    The Japan Atomic Energy Research Institute (JAERI) has been carrying out the research on radiation damage mechanism of heat-resistant ceramic composite materials, as one of the subjects of the innovative basic research on high temperature engineering using the High Temperature Engineering Test Reactor (HTTR). A series of preliminary irradiation tests is being made using the Japan Materials Testing Reactor (JMTR). The present report describes results of post-irradiation examinations (PIE) so far on specimens irradiated in the first capsule, designated 97M-13A, to fast neutron fluences of 1.2-1.8x10{sup 24} m{sup -2} (E>1 MeV) at temperatures of 573, 673 and 843 K. In the PIE, measurements were made on (1) dimensional changes, (2) thermal expansions, (3) X-ray parameters and (4) {gamma}-ray spectra. The results for the carbon/carbon and SiC/SiC composites were similar to those in existing literatures. The temperature monitor effect was observed both for SiC fiber- and particle-reinforced SiC composites as in the case of monolithic SiC. Namely, the curve of the coefficient of thermal expansion (CTE) of these specimens showed a rapid drop above a temperature around the irradiation temperature +100 K in the first ramp (ramp rate: 10 K/min), while in the second ramp the CTE curves were almost the same as those of un-irradiated SiC specimens. (author)

  18. Jaw-opening force test to screen for Dysphagia: preliminary results.

    Science.gov (United States)

    Hara, Koji; Tohara, Haruka; Wada, Satoko; Iida, Takatoshi; Ueda, Koichiro; Ansai, Toshihiro

    2014-05-01

    To assess the jaw-opening force test (JOFT) for dysphagia screening. Criterion standard. University dental hospital. Patients complaining of dysphagia (N=95) and with symptoms of dysphagia with chronic underlying causes (mean age ± SD, 79.3±9.61y; range, 50-94y; men: n=49; mean age ± SD, 77.03±9.81y; range, 50-94y; women: n=46; mean age ± SD, 75.42±9.73y; range, 51-93y) admitted for treatment between May 2011 and December 2012 were included. None. All patients were administered the JOFT and underwent fiberoptic endoscopic evaluation of swallowing (FEES). The mean jaw-opening strength was compared with aspiration (ASP) and pharyngeal residue observations of the FEES, which was used as the criterion standard. A receiver operating characteristic (ROC) curve analysis was performed. Forces of ≤3.2kg for men and ≤4kg for women were appropriate cutoff values for predicting ASP with a sensitivity and specificity of .57 and .79 for men and .93 and .52 for women, respectively. Based on the ROC analyses for predicting pharyngeal residue, forces of ≤5.3kg in men and ≤3.9kg in women were appropriate cutoff values, with a sensitivity and specificity of .80 and .88 for men and .83 and .81 for women, respectively. The JOFT could be a useful screening tool for predicting pharyngeal residue and could provide useful information to aid in the referral of patients for further diagnostic imaging testing. However, given its low sensitivity to ASP the JOFT should be paired with other screening tests that predict ASP. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  19. Preliminary Tests of Nose- and Side- Entrance Blower Cooling Systems for Radial Engines, Special Report

    Science.gov (United States)

    Biermann, David; Valentine, E. Floyd

    1939-01-01

    Two cowling systems intended to reduce the drag and improve the low-speed cooling characteristics of conventional radial engine cowlings were tested in model form to determine the practicability of the methods. One cowling included a blower mounted on the rear face of a large propeller spinner which drew cooling air in through side entrance ducts located behind the equivalent engine orifice plate. The air was passed through the equivalent engine orifice plate from rear to front and out through a slot between the spinner and the engine plate. The blower produced substantially all the power necessary to circulate the cooling air in some cases, so the quantity of air flowing was independent of the air speed, Two types of blowers were used, a centrifugal type and one using airfoil blades which forced the air outward from the center of rotation. The other cowling was similar to the conventional N.A.C.A. cowling except for the addition of a large propeller spinner nose. The spinner was provided with a hole in the nose to admit cooling air and blower blades to increase the pressure for cooling at low speeds. The tests show that with both cowling types the basic drag of the nacelle was reduced substantially below that for the N.A.C.A. cowling by virtue of the better nose shape made possible by the spinner . The drag due to the side-entrance ducts was nearly zero when the openings were closed or when the blower was drawing in a certain quantity of air in proportion to the air speed. The drag increased, however, when air mas allowed to spill from the openings. The nose-entrance blower showed considerable promise as a cooling means although the blower tested was relatively inefficient, owing to the fact that the blower compartments evidently were expanded too rapidly under the conditions imposed. by the design.

  20. A preliminary guidebook for identifying stratigraphic contacts at the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Pawloski, G.A.; McKague, H.L.; Wagoner, J.L. [Lawrence Livermore National Lab., CA (United States); McKinnis, W.B. [Lawrence Livermore National Lab., Mercury, NV (United States)

    1992-01-01

    Lithologic variation, regional depositional trends, and the lack of written guidelines have resulted in inconsistencies in the recognition of stratigraphic contacts in drill holes at the Nevada Test Site (NTS). Stratigraphic identification, based on mineralogy of discrete samples, can be augmented by geophysical logs and downhole movies to more accurately and consistently locate contacts between units. Criteria are established for locating the base of the Pahute Mesa ash-flow tuff, the top of the Ammonia Tanks ash-flow tuff, the top of the Ammonia Tanks bedded tuff, and the top and the base of the Rainier Mesa Tuff.

  1. Blood splash in lambs-a preliminary study using the one-stage prothrombin time test.

    Science.gov (United States)

    Restall, D J

    1981-02-01

    Lambs from a flock in which a high incidence of blood splash had been detected were examined using the one-stage prothrombin test. For comparison lambs from a commercial slaughter line were also examined. All the affected lambs and 35·4% from the slaughter line had extended prothrombin times, and a relationship between extended prothrombin times and the occurrence of blood splash was established. Investigation of the pastures grazed by the affected flock showed the presence of coumarin producing plants and grasses. Some coumarin drugs prolong one-stage prothrombin times, and more importantly, induce capillary fragility, thus predisposing animals to blood splash.

  2. The Gaia-FUN-SSO observation campaign of 99942 Apophis: A preliminary test for the network

    CERN Document Server

    Bancelin, D; Ivantsov, A; Desmars, J; Assafin, M; Eggl, S; Hestroffer, D; Rocher, P; Carry, B; David, P

    2016-01-01

    In order to test the coordination and evaluate the overall performance of the Gaia-FUN-SSO, an observation campaign on the Potentially Hazardous Asteroid (99 942) Apophis was conducted from 12/21/2012 to 5/2/2013 providing 2732 high quality astrometric observations. We show that a consistent reduction of astrometric campaigns with reliable stellar catalogs substantially improves the quality of astrometric results. We present evidence that the new data will help to reduce the orbit uncertainty of Apophis during its close approach in 2029.

  3. Development and Preliminary Tests of an Open-Path Airborne Diode Laser Absorption Instrument for Carbon Dioxide

    Science.gov (United States)

    Diskin, Glenn S.; DiGangi, Joshua P.; Yang, Melissa; Slate, Thomas A.; Rana, Mario

    2015-01-01

    Carbon dioxide (CO2) is well known for its importance as an atmospheric greenhouse gas, with many sources and sinks around the globe. Understanding the fluxes of carbon into and out of the atmosphere is a complex and daunting challenge. One tool applied by scientists to measure the vertical flux of CO2 near the surface uses the eddy covariance technique, most often from towers but also from aircraft flying specific patterns over the study area. In this technique, variations of constituents of interest are correlated with fluctuations in the local vertical wind velocity. Measurement requirements are stringent, particularly with regard to precision, sensitivity to small changes, and temporal sampling rate. In addition, many aircraft have limited payload capability, so instrument size, weight, and power consumption are also important considerations. We report on the development and preliminary application of an airborne sensor for the measurement of atmospheric CO2. The instrument, modeled on the successful DLH (Diode Laser Hygrometer) series of instruments, has been tested in the laboratory and on the NASA DC-8 aircraft. Performance parameters such as accuracy, precision, sensitivity, specificity, and temporal response are discussed in the context of typical atmospheric variability and suitability for flux measurement applications. On-aircraft, in-flight data have been obtained and are discussed as well. Performance of the instrument has been promising, and continued flight testing is planned during 2016.

  4. Skin Prick Test Analysis in Allergic Rhinitis Patients: A Preliminary Study in Abuja, Nigeria

    Directory of Open Access Journals (Sweden)

    P. U. Ibekwe

    2016-01-01

    Full Text Available Allergic rhinitis (AR is prevalent in Nigeria, though little information exists on the allergen. We assessed the clinical features of AR patients in our environment based on the allergic rhinitis impact on asthma (ARIA classification. Only patients with positive skin prick test (SPT were recruited. Seventy-four patients participated in the study. AR and asthma comorbidity were observed in 13.5%. The proportion of “sneezers-runners” was higher than “blockers” with significantly more “sneezers-runners” having persistent AR (P=0.007. No relationship was established between these predominant symptoms and the aeroallergens used in this study. Intermittent mild and moderate/severe AR were evident in 13.5% and 31.1%, while persistent mild and moderate/severe were seen in 20.3% and 35.1%, respectively. House dust mites allergen yielded the highest number of positive responses (22.6% followed by tree pollen (16.8%. No relationship was observed between the allergens tested and AR severity. Majority of patients were oligosensitive (33.8% and polysensitive (35.1% and were not significantly associated with AR severity (P=0.07. Most AR patients presenting for treatment in Abuja, Nigeria, had moderate-severe persistent AR and showed similar SPT sensitization pattern with countries having similar climatic conditions. Sensitization patterns were not related to ARIA classification or predominant AR symptoms.

  5. Word memory test performance in Canadian adolescents with learning disabilities: a preliminary study.

    Science.gov (United States)

    Larochette, Anne-Claire; Harrison, Allyson G

    2012-01-01

    The purpose of this study was to evaluate Word Memory Test (WMT) performances in students with identified learning disabilities (LDs) providing good effort to examine the influence of severe reading or learning problems on WMT performance. Participants were 63 students with LDs aged 11 to 14 years old (M = 12.19 years), who completed psychoeducational assessments as part of a transition program to secondary school. Participants were administered a battery of psychodiagnostic tests including the WMT. Results indicated that 9.5% of students with LD met Criterion A on the WMT (i.e., perform below cut-offs on any of the first three subtests of the WMT), but less than 1% met both criteria necessary for identification of low effort. Failure on the first three subtests of the WMT was associated with word reading at or below the 1st percentile and severely impaired phonetic decoding and phonological awareness skills. These results indicate that the majority of students with a history of LD are capable of passing the WMT, and use of profile analysis reduces the false-positive rate to below 1%.

  6. Preliminary CFD Assessment of an Experimental Test Facility Operating with Heavy Liquid Metals

    Directory of Open Access Journals (Sweden)

    Matteo Lizzoli

    2017-01-01

    Full Text Available The CFD analysis of a Venturi nozzle operating in LBE (key component of the CIRCE facility, owned by ENEA is presented in this paper. CIRCE is a facility developed to investigate in detail the fluid-dynamic behavior of ADS and/or LFR reactor plants. The initial CFD simulations have been developed hand in hand with the comparison with experimental data: the test results were used to confirm the reliability of the CFD model, which, in turn, was used to improve the interpretation of the experimental data. The Venturi nozzle is modeled with a 3D CFD code (STAR-CCM+. Later on, the CFD model has been used to assess the performance of the component in conditions different from the ones tested in CIRCE: the performance of the Venturi is presented, in terms of pressure drops, for various operating conditions. Finally, the CFD analysis has been focused on the evaluation of the effects of the injection of an inert gas in the flow of the liquid coolant on the performance of the Venturi nozzle.

  7. A Structured Clinical Interview for Kleptomania (SCI-K): preliminary validity and reliability testing.

    Science.gov (United States)

    Grant, Jon E; Kim, Suck Won; McCabe, James S

    2006-06-01

    Kleptomania presents difficulties in diagnosis for clinicians. This study aimed to develop and test a DSM-IV-based diagnostic instrument for kleptomania. To assess for current kleptomania the Structured Clinical Interview for Kleptomania (SCI-K) was administered to 112 consecutive subjects requesting psychiatric outpatient treatment for a variety of disorders. Reliability and validity were determined. Classification accuracy was examined using the longitudinal course of illness. The SCI-K demonstrated excellent test-retest (Phi coefficient = 0.956 (95% CI = 0.937, 0.970)) and inter-rater reliability (phi coefficient = 0.718 (95% CI = 0.506, 0.848)) in the diagnosis of kleptomania. Concurrent validity was observed with a self-report measure using DSM-IV kleptomania criteria (phi coefficient = 0.769 (95% CI = 0.653, 0.850)). Discriminant validity was observed with a measure of depression (point biserial coefficient = -0.020 (95% CI = -0.205, 0.166)). The SCI-K demonstrated both high sensitivity and specificity based on longitudinal assessment. The SCI-K demonstrated excellent reliability and validity in diagnosing kleptomania in subjects presenting with various psychiatric problems. These findings require replication in larger groups, including non-psychiatric populations, to examine their generalizability. Copyright (c) 2006 John Wiley & Sons, Ltd.

  8. Clinical utility of the Multiple Errands Test in schizophrenia: A preliminary assessment.

    Science.gov (United States)

    Bulzacka, Ewa; Delourme, Gwenaëlle; Hutin, Valérie; Burban, Nathalie; Méary, Alexandre; Lajnef, Mohamed; Leboyer, Marion; Schürhoff, Franck

    2016-06-30

    Schizophrenia (SZ) is a chronic, severe disease, which results in misperception of reality, major social withdrawal, and cognitive disturbances. One type of cognitive disturbance, known as executive dysfunction, is widely considered as a primary determinant of functional outcome. However, classic neuropsychological measures of executive functioning (EF) poorly represent patients' functional outcome, and thus seem inappropriate for evaluating the real-world functional impact of diseases such as SZ. We hypothesized that the Multiple Errands Test (MET), an ecological assessment of executive function would show greater ability to measure everyday adaptive functioning SZ, compared to conventional EF assessment methods. 100 clinically stable SZ patients were administered the MET, Wisconsin Card Sorting Test - 64 and a paper version of MET. Correlation analyses were performed between each EF measure and functional outcome, as measured by the Social Autonomy Scale (SAS). After adjusting for age, education, IQ and illness duration, SAS was significantly predicted by MET global score. No other EF measure correlated with SAS. Results from this study suggest that MET offers a valuable prediction of daily life functional outcome in this large sample of SZ patients. Therefore, it could be used as a complementary measure to improve the identification of executive dysfunctions prior to psychosocial interventions.

  9. High-resolution cross-borehole thermal tracer testing in granite: preliminary field results

    Science.gov (United States)

    Brixel, Bernard; Klepikova, Maria; Jalali, Mohammadreza; Amann, Florian; Loew, Simon

    2017-04-01

    Understanding how heat is transported, stored and exchanged across fractured media is becoming increasingly relevant in our society, as manifested from the growing popularity of modern technologies relying on the subsurface to either source or store heat. One good example is the utilization of heat from deep hydrothermal or petrothermal systems to generate electricity for base load power generation, a technology also known as deep geothermal energy (DGE). While very attractive in principle, the number of geothermal fields producing economical levels of electricity to this day is still very limited - largely due to the difficulty of either locating deep reservoirs that are both sufficiently hot and permeable or, in the absence of the latter, creating them. In this context, the Swiss Competence Center for Energy Research - Supply of Electricity (SCCER - SoE) is carrying out an in situ stimulation and circulation (ISC) experiment at the Grimsel Test Site (GTS), an underground rock lab located in the Aar massif, in the Swiss Alps. The circulation experiment planned for the post-stimulation phase represents one of the key components of this experimental research program, and the outcome of this test is expected to ultimately provide key insights in the factors controlling the performance of enhanced geothermal reservoirs. Therefore, to support the design of this experiment, short-term thermal tracer tests (TTT) were conducted with the objective to (i) assess the feasibility of conducting TTTs in a relatively intact granite (where fluid flow is controlled by a limited number of discrete fractures); (ii) determine optimal experimental setups; and to ultimately (iii) monitor thermal breakthroughs at high spatial and temporal resolution, providing insights on heat transport and complementing the characterization of hydrogeological conditions carried out through conventional means (e.g. hydraulic and/or solute tracer tests). Presented herein are the results of a 10-day

  10. Running surface couplings

    OpenAIRE

    1995-01-01

    We discuss the renormalization group improved effective action and running surface couplings in curved spacetime with boundary. Using scalar self-interacting theory as an example, we study the influence of the boundary effects to effective equations of motion in spherical cap and the relevance of surface running couplings to quantum cosmology and symmetry breaking phenomenon. Running surface couplings in the asymptotically free SU(2) gauge theory are found.

  11. Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace

    Science.gov (United States)

    D'Elia, Raffaele; Bernhart, Gérard; Cutard, Thierry; Peraudeau, Gilles; Balat-Pichelin, Marianne

    2014-06-01

    This research is part of the PERSEUS project, a space program concerning hybrid propulsion and supported by CNES. The main goal of this study is to characterise silicon carbide based micro-concrete with a maximum aggregates size of 800 μm, in a hybrid propulsion environment. The nozzle throat has to resist to a highly oxidising polyethylene (PE)/N2O hybrid environment, under temperatures ranging up to 2980 K. The study is divided into two main parts: the first one deals with the thermo-mechanical characterisation of the material up to 1500 K and the second one with an investigation on the oxidation behaviour in a standard atmosphere, under a solar flux up to 13.5 MW/m2. Young's modulus was determined by resonant frequency method: results show an increase with the stabilisation temperature. Four point bending tests have shown a rupture tensile strength increasing with stabilisation temperature, up to 1473 K. Sintering and densification processes are primary causes of this phenomenon. Visco-plastic behaviour appears at 1373 K, due to the formation of liquid phases in cement ternary system. High-temperature oxidation in ambient air was carried out at PROMES-CNRS laboratory, on a 2 kW solar furnace, with a concentration factor of 15,000. A maximum 13.5 MW/m2 incident solar flux and a 7-90 s exposure times have been chosen. Optical microscopy, SEM, EDS analyses were used to determine the microstructure evolution and the mass loss kinetics. During these tests, silicon carbide undergoes active oxidation with production of SiO and CO smokes and ablation. A linear relation between mass loss and time is found. Oxidation tests performed at 13.5 MW/m2 solar flux have shown a mass loss of 10 mg/cm2 after 15 s. After 90 s, the mass loss reaches 60 mg/cm2. Surface temperature measurement is a main point in this study, because of necessity of a thermo-mechanical-ablative model for the material. Smokes appear at around 5.9 MW/m2, leading to the impossibility of useful temperature

  12. Preliminary Study on Mg content of hard part(Test) of a benthic foraminifer from the inner shelf, off West Coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Khare, N.; Nigam, R.; Iyer, S.D.

    A preliminary study has been made for trace element (Mg) in the test of benthic species Bulimina exilis from a shallow sediment core (at 22 m water depth) off west coast of India using Electron Probe Microanalyser (EPMA) The Mg content is selected...

  13. Preliminary testing of the role of exercise and predator recognition for bonytail and razorback sucker

    Science.gov (United States)

    Mueller, Gordon A.; Carpenter, Jeanette; Krapfel, Robert; Figiel, Chester

    2007-01-01

    Hatchery-reared juvenile, suckers appeared curious and showed no sign of predator avoidance when initially placed with large (>45-cm TL) flathead catfish. Predator-naïve juveniles (20- to 25-cm TL) exhibited no discernable preference when provided areas with and without (52 percent and 48 percent, n = 16 observations; 46 percent and 54 percent, n = 20 observations) large flathead catfish. However, once predation occurred, use of predator-free areas nearly doubled in two trials (36 percent and 64 percent, n = 50 observations; 33 percent and 67 percent, n = 12 observations). A more stringent test examining available area indicated predator-savvy razorback suckers used predator-free areas (88 percent, n = 21) illustrating predator avoidance was a learned behavior.

  14. Preliminary design of mesoscale turbocompressor and rotordynamics tests of rotor bearing system

    Science.gov (United States)

    Hossain, Md Saddam

    2011-12-01

    A mesoscale turbocompressor spinning above 500,000 RPM is evolutionary technology for micro turbochargers, turbo blowers, turbo compressors, micro-gas turbines, auxiliary power units, etc for automotive, aerospace, and fuel cell industries. Objectives of this work are: (1) to evaluate different air foil bearings designed for the intended applications, and (2) to design & perform CFD analysis of a micro-compressor. CFD analysis of shrouded 3-D micro compressor was conducted using Ansys Bladegen as blade generation tool, ICEM CFD as mesh generation tool, and CFX as main solver for different design and off design cases and also for different number of blades. Comprehensive experimental facilities for testing the turbocompressor system have been also designed and proposed for future work.

  15. Some Preliminary Notes on an Empirical Test of Freud’s Theory on Depression

    Directory of Open Access Journals (Sweden)

    Mattias eDesmet

    2013-05-01

    Full Text Available A review of the literature indicates that empirical researchers have difficulty translating Freud’s theory on depression into appropriate research questions and hypotheses. In their attempt to do so, the level of complexity in Freud’s work is often lost. As a result, what is empirically tested is no more than a caricature of the original theory. To help researchers avoid such problems, this study presents a conceptual analysis of Freud’s theory of depression as it is presented in Mourning and Melancholia (Freud, 1917. In analyzing Freud’s theory on the etiology of depression, it is essential to differentiate between (1 an identification with the satisfying and frustrating aspects of the love object, (2 the inter- and an intrapersonal loss of the love object, and (3 conscious and unconscious dynamics. A schematic representation of the mechanism of depression is put forward and a research design by which this schema can be empirically investigated is outlined.

  16. Preliminary indications for antibiotic susceptibility tests in less than six hour in positive blood cultures

    Directory of Open Access Journals (Sweden)

    Vesselina Kroumova

    2010-03-01

    Full Text Available A rapid determination of the antibiotic susceptibility patterns of pathogens responsible for sepsis represents a significant milestone for a timely correct antibiotic therapy.The system HB&L® (ALIFAX allows reduced time in the detection of bacterial growth and consequently is able to detect the growth or absence of certain microorganisms in the presence of a given antibiotic. In this study three system for rapid antibiotic susceptibility tests among bacteria isolated from blood were compared: HB&L® (ALIFAX,VITEK®2 (bioMérieux and essays Etest® (bioMérieux. Present findings indicate that HB&L® (ALIFAX is rapid reliable instrument that may support the clinician for a rapid and appropriate treatment, particularly in the critical patient.

  17. [Preliminary application of video head impulse test in the diagnosis of vertigo].

    Science.gov (United States)

    Zhang, Yanmei; Chen, Siqi; Zhong, Zhen; Chen, Li; Wu, Yuanding; Zhao, Guiping; Liu, Yuhe

    2015-06-01

    To investigate clinical application of head impulse test with video recording eye movements in the diagnosis of vertigo. The video head impulse test(vHIT) was used to measure the eye saccades and velocity gain in 95 patients with vertigo which were divided into two groups, peripheral vertigo (47 cases) and central vertigo(48 cases); the characteristics of eye saccades and velocity gain of six semicircular canals in different patients with vertigo were analyzed, and were compared between the two groups. The vHIT result in patients with peripheral vertigo: in 22 patients (23 affected ears) with Meniere's disease, 21 ears were abnormal (91. 3%); the vHIT results in 4 patients with vestibular schwannoma, 2 patients with vestibular neuritis, 5 patients with delayed endolymphatic hydrops, 6 patients with sudden hearing loss accompanied vertigo, and 8 patients with vestibular dysfunction, were abnormal with correct saccades and/or lower velocity gain of vHIT. The abnormal vHIT results were also found in 35 of 48 patients (72. 9%) with central vertigo, which including posterior cerebral circulation ischemia(7 patients), cerebral infarction/stroke(6 patients), and dizziness with vertigo(17 patients) and others(18 patients). Abnormal rate of vHIT in patients with peripheral vertigo was 95. 7% (45/47), which was significantly higher than that (72. 9%) in patients with central vertigo. It is easy to perform the vHIT which without adverse reactions. We can record high-frequency characteristics of vestibular-ocular reflex among six semicircular canals through vHIT. The vHIT results which show the function of vestibular ocular reflex in different diseases with vertigo, can help discriminate peripheral vertigo from central vertigo, and it is a practical assessment method for vertigo.

  18. [Development of external quality control protocol for CyberKnife beams dosimetry: preliminary tests multicentre].

    Science.gov (United States)

    Guinement, L; Marchesi, V; Veres, A; Lacornerie, T; Buchheit, I; Peiffert, D

    2013-01-01

    To develop an external quality control procedure for CyberKnife(®) beams. This work conducted in Nancy, has included a test protocol initially drawn by the medical physicist of Nancy and Lille in collaboration with Equal-Estro Laboratory. A head and neck anthropomorphic phantom and a water-equivalent homogeneous cubic plastic test-object, so-called "MiniCube", have been used. Powder and solid thermoluminescent dosimeters as well as radiochromic films have been used to perform absolute and relative dose studies, respectively. The comparison between doses calculated by Multiplan treatment planning system and measured doses have been studied in absolute dose. The dose distributions measured with films and treatment planning system calculations have been compared via the gamma function, configured with different tolerance criteria. This work allowed, via solid thermoluminescent dosimeter measurements, verifying the beam reliability with a reproducibility of 1.7 %. The absolute dose measured in the phantom irradiated by the seven participating centres has shown an error inferior to the standard tolerance limits (± 5 %), for most of participating centres. The relative dose measurements performed at Nancy and by the Equal-Estro laboratory allowed defining the most adequate parameters for gamma index (5 %/2mm--with at least 95 % of pixels satisfying acceptability criteria: γsoftware. This work allowed defining a dosimetric external quality control for CyberKnife(®) systems, based on a reproducible irradiation plan through measurements performed with thermoluminescent dosimeters and radiochromic films. This protocol should be validated by a new series of measurement and taking into account the lessons of this work. Copyright © 2013 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

  19. Progeny test of tetraploid Betula platyphylla and preliminary selection of hybrid parents

    Institute of Scientific and Technical Information of China (English)

    Huanwen Xu; Yu Liu; Jing Jiang; Guifeng Liu; Xiyang Zhao

    2016-01-01

    Estimating genetic parameters of parental lines through progeny testing and choosing good hybrid parents are important for genetically improving seed orchard trees. In this study, 24 tetraploid progeny seedlings were used as experimental materials, which came from test cross design:six tetraploid Betula platyphylla lines (Q33, Q13, Q103, Q19, Q83 and Q14) as female parents and four individual B. platyphylla diploid lines (F3, F4, F9 and F11) as male parents were crossed. Variance analysis of height, diame-ter, height-to-diameter ratio, and internodal distance showed that the differences between hybrid combinations reached highly significant levels. Using multi-objective decisionmaking, we performed a comprehensive assess-ment of the various hybrid combinations. Using a selection rate of 20% of the standard, five hybrids were selected;their genetic gains in average height, diameter, height-to-diameter ratio, and internodal distance were 20.95, 6.07, 13.07 and 8.96%, respectively. We also analyzed the combining ability and genetic parameter effect values of parents and hybrid combinations. The combined analysis revealed that Q13, Q103, Q33 and Q83 were superior females; F3, F4, and F9 were superior males; and F3 9 Q13, F4 9 Q83 and F9 9 Q33 were superior hybrid combinations. The heights and diameters of these proge-nies were 22.49 and 11.48% greater than average, respectively.

  20. Preliminary Correlation Map of Geomorphic Surfaces in North-Central Frenchman Flat, Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada

    2005-08-01

    This correlation map (scale = 1:12,000) presents the results of a mapping initiative that was part of the comprehensive site characterization required to operate the Area 5 Radioactive Waste Management Site, a low-level radioactive waste disposal facility located in northern Frenchman Flat at the Nevada Test Site. Eight primary map units are recognized for Quaternary surfaces: remnants of six alluvial fan or terrace surfaces, one unit that includes colluvial aprons associated with hill slopes, and one unit for anthropogenically disturbed surfaces. This surficial geology map provides fundamental data on natural processes for reconstruction of the Quaternary history of northern Frenchman Flat, which in turn will aid in the understanding of the natural processes that act to develop the landscape, and the time-frames involved in landscape development. The mapping was conducted using color and color-infrared aerial photographs and field verification of map unit composition and boundaries. Criteria for defining the map unit composition of geomorphic surface units are based on relative geomorphic position, landform morphology, and degree of preservation of surface morphology. The bedrock units identified on this map were derived from previous published mapping efforts and are included for completeness.

  1. Preliminary operational results of the low-temperature solar industrial process heat field tests

    Energy Technology Data Exchange (ETDEWEB)

    Kutscher, C.F.; Davenport, R.L.

    1980-06-01

    Six solar industrial process heat field tests have been in operation for a year or more - three are hot water systems and three are hot air systems. All are low-temperature projects (process heat at temperatures below 212/sup 0/F). Performance results gathered by each contractor's data acquisition system are presented and project costs and problems encountered are summarized. Flat-plate, evacuated-tube, and line-focus collectors are all represented in the program, with collector array areas ranging from 2500 to 21,000 ft/sup 2/. Collector array efficiencies ranged from 12% to 36% with net system efficiencies from 8% to 33%. Low efficiencies are attributable in some cases to high thermal losses and, for the two projects using air collectors, are due in part to high parasitic power consumption. Problems have included industrial effluents on collectors, glazing and absorber surface failures, excessive thermal losses, freezing and overheating, control problems, and data acquisition system failure. With design and data acquisition costs excluded costs of the projects ranged from $25/ft/sup 2/ to $87/ft/sup 2/ and $499/(MBtu/yr) to $1537/(MBtu/yr).

  2. Preliminary photovoltaic arc-fault prognostic tests using sacrificial fiber optic cabling.

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Jay Dean; Blemel, Kenneth D.; Peter, Francis

    2013-02-01

    Through the New Mexico Small Business Assistance Program, Sandia National Laboratories worked with Sentient Business Systems, Inc. to develop and test a novel photovoltaic (PV) arc-fault detection system. The system operates by pairing translucent polymeric fiber optic sensors with electrical circuitry so that any external abrasion to the system or internal heating causes the fiber optic connection to fail or detectably degrade. A periodic pulse of light is sent through the optical path using a transmitter-receiver pair. If the receiver does not detect the pulse, an alarm is sounded and the PV system can be de-energized. This technology has the unique ability to prognostically determine impending failures to the electrical system in two ways: (a) the optical connection is severed prior to physical abrasion or cutting of PV DC electrical conductors, and (b) the polymeric fiber optic cable melts via Joule heating before an arc-fault is established through corrosion. Three arc-faults were created in different configurations found in PV systems with the integrated fiber optic system to determine the feasibility of the technology. In each case, the fiber optic cable was broken and the system annunciated the fault.

  3. The physical education predisposition scale: Preliminary tests of reliability and validity in Australian students.

    Science.gov (United States)

    Hilland, Toni A; Brown, Trent D; Fairclough, Stuart J

    2017-03-30

    The main aim of this study was to psychometrically test the Physical Education Predisposition Scale (PEPS) with a cohort of Australian students, to assess secondary school students' perceived PE ability and PE worth. Secondary aims were to explore how the two variables were related and to investigate age and gender differences. Altogether, 266 Year 7, 8, 9 and 10 students (aged 12-16 years), from four schools within the South Eastern region of Melbourne, completed the PEPS at both time points. Principal components analysis revealed the presence of a simple two-factor structure explaining 66.9% of the variance. Factor 1 (labelled perceived PE worth) reflected enjoyment and attitude (α = .91), and factor 2 (labelled perceived PE ability) represented perceptions of competence and self-efficacy (α = .92). Significant positive correlations were observed between the two factors (r = .50-.82, P < .001). Boys scored significantly higher than girls on perceived PE ability (P = .01), and year 7 students scored significantly higher compared to Year 9 students (P = .002). Our results support the potential of the PEPS as a concise measurement tool for use in the PE setting, for both teachers and researchers.

  4. ANALYSIS OF THE FORCE DURING OVERCOMING THE ROADBLOCK – THE PRELIMINARY EXPERIMENTAL TESTS

    Directory of Open Access Journals (Sweden)

    Jakub POLASIK

    2016-03-01

    Full Text Available The paper applies to the issue of preservation of passenger vehicles during overcoming the roadblocks on a dry asphalt surface with the constant speed. The study aimed to estimate the forces which are affecting the suspension of the vehicle during the contact between a tyre and roadblock. Using the video recording it is possible to calculate the values of the tyre deflection and forces acting in the system. The obtained deflections of the tyres were compared to earlier laboratory test results and load-deflection characteristics of the tyres with the same size. The roadblock with the defined geometry causes a dynamic deflection of the tyre. During the study a significant change in the geometry of the suspension has not occurred. The paper presents the characteristics of the vehicles research with a particular regard to model and type of tyres. The determination of the exact dimensions of the roadblocks and application of the ADIS 16385 system for acquisition and archiving the features of the kinematic motion of the vehicle allowed to determine the speed at the moment of collision with the roadblock.

  5. Medical chilling device designed for hypothermic hydration graft storage system: Design, thermohydrodynamic modeling, and preliminary testing

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Jung Hwan [Hongik University, Seoul (Korea, Republic of)

    2015-02-15

    Hypothermic hydration graft storage is essential to reduce the metabolic demand of cells in vitro. The alleviated metabolic demands reduce the emergence rate of anaerobic metabolism generating adenosine triphosphate (ATP) energy that creates free radicals. The cessive free radicals can damage cells and tissues due to their highly oxidative power with molecules. Current cooling systems such as a conventional air cooling system and an ice pack system are inappropriate for chilling cell tissues in vitro because of inconvenience in use and inconsistent temperature sustainability caused by large size and progressive melting, respectively. Here, we develop a medical chilling device (MCD) for hypothermic hydration graft storage based on thermo-hydrodynamic modeling and thermal electric cooling technology. Our analysis of obtained hydrodynamic thermal behavior of the MCD revealed that the hypothermic condition of 4 .deg. C was continuously maintained, which increased the survival rates of cells in vitro test by reduced free radicals. The validated performance of the MCD promises future development of an optimal hypothermic hydration graft storage system designed for clinical use.

  6. The Dichotic Word Listening Test: preliminary observations in American and Canadian samples.

    Science.gov (United States)

    Roberts, M A; Persinger, M A; Grote, C; Evertowski, L M; Springer, J A; Tuten, T; Moulden, D; Franzen, K M; Roberts, R J; Baglio, C S

    1994-11-01

    The present article describes observations of 670 American and Canadian child and adult control subjects on the recently developed Dichotic Word Listening Test (DWLT). The task was also administered to a sample of American children with traumatic brain injuries (n=21) of varying severity and a sample of American adults with mild traumatic injuries (n=36). The conceptual focus in this line of research was on using normative observations to identify clinically defective channels of auditory processing among patients. The principal findings were as follow: 1) the DWLT was sensitive to the effects of cerebral dysfunction following traumatic brain injury; 2) differences among normal samples with different demographic backgrounds were frequently observed, arguing for the development of local norms; 3) a shorter form of the DWLT task (DWLT30) can be used for screening purposes with relatively little reduction in sensitivity to cerebral dysfunction; 4) there appeared to be considerable improvement of DWLT performance between the ages of five and seven, due largely to higher scores from the left auditory channel; and 5) there were indications that use of French (rather than English) as one's native language before age six can negatively influence performance in adulthood on an English version of the DWLT. In general, the present findings suggest that the DWLT is likely to have relatively broad applicability for neuropsychological assessment across the life-span.

  7. User attitudes in analyzing digital slides in a quality control test bed: a preliminary study.

    Science.gov (United States)

    Della Mea, Vincenzo; Demichelis, Francesca; Viel, Federico; Dalla Palma, Paolo; Beltrami, Carlo Alberto

    2006-05-01

    The pathologist examines suitably stained glass slides through a bright field microscope in order to render histopathological or cytological diagnosis by looking at tissues and cells. Glass slides serve as a permanent record of the patient disease. Over the course of a patient's treatment slides may need to be reviewed at other institutions before treatment can commence. Due to their fragile nature a transportable permanent digital facsimile of the glass slide would be ideal. A digital slide is a set of digital images representing the whole slide normally used by the pathologist, or a significant part of it; it is usually made by a large amount of images, up to thousands, which makes its management difficult. The present paper provides a description of the requirements needed to reproduce glass slides and of the available technological equipment, then the features of the two systems we implemented on different hardware are described, together with those of the digital slide viewer. The viewer was evaluated in two experimental test phases, during which user behaviour and diagnostic reports were measured. Digital slides used in the two experiments were acquired with either system. Possible applications of digital slides are then discussed, including undergraduate and professional education, quality control, and image analysis on full samples as well as on tissue microarrays.

  8. Preliminary testing of a compact bone-attached robot for otologic surgery

    Science.gov (United States)

    Dillon, Neal P.; Balachandran, Ramya; Motte dit Falisse, Antoine; Wanna, George B.; Labadie, Robert F.; Withrow, Thomas J.; Fitzpatrick, J. Michael; Webster, Robert J.

    2014-03-01

    Otologic surgery often involves a mastoidectomy procedure, in which part of the temporal bone is milled away in order to visualize critical structures embedded in the bone and safely access the middle and inner ear. We propose to automate this portion of the surgery using a compact, bone-attached milling robot. A high level of accuracy is required t o avoid damage to vital anatomy along the surgical path, most notably the facial nerve, making this procedure well-suited for robotic intervention. In this study, several of the design considerations are discussed and a robot design and prototype are presented. The prototype is a 4 degrees-of-freedom robot similar to a four-axis milling machine that mounts to the patient's skull. A positioning frame, containing fiducial markers and attachment points for the robot, is rigidly attached to the skull of the patient, and a CT scan is acquired. The target bone volume is manually segmented in the CT by the surgeon and automatically converted to a milling path and robot trajectory. The robot is then attached to the positioning frame and is used to drill the desired volume. The accuracy of the entire system (image processing, planning, robot) was evaluated at several critical locations within or near the target bone volume with a mean free space accuracy result of 0.50 mm or less at all points. A milling test in a phantom material was then performed to evaluate the surgical workflow. The resulting milled volume did not violate any critical structures.

  9. Partial Nucleate Pool Boiling at Low Heat Flux: Preliminary Ground Test for SOBER-SJ10

    Science.gov (United States)

    Wu, Ke; Li, Zhen-Dong; Zhao, Jian-Fu; Li, Hui-Xiong; Li, Kai

    2016-05-01

    Focusing on partial nucleate pool boiling at low heat flux, SOBER-SJ10, one of 27 experiments of the program SJ-10, has been proposed to study local convection and heat transfer around an isolated growing vapor bubble during nucleate pool boiling on a well characterized flat surface in microgravity. An integrated micro heater has been developed. By using a local pulse overheating method in the experimental mode of single bubble boiling, a bubble nucleus can be excited with accurate spatial and temporal positioning on the top-side of a quartz glass substrate with a thickness of 2 mm and an effective heating area of 4.5 mm in diameter, and then grows under an approximate constant heat input provided by the main heater on the back-side of the substrate. Ten thin film micro-RTDs are used for local temperature measurements on the heating surface underneath the growing bubble. Normal pool boiling experiments can also be carried out with step-by-step increase of heating voltage. A series of ground test of the flight module of SOBER-SJ10 have been conducted. Good agreement of the measured data of single phase natural convection with the common-used empirical correlation warrants reasonable confidence in the data. It is found that the values of the incipience superheat of pool boiling at different subcooling are consistent with each others, verifying that the influence of subcooling on boiling incipience can be neglected. Pool boiling curves are also obtained, which shows great influence of subcooling on heat transfer of partial nucleate pool boiling, particularly in lower heat flux.

  10. Brazilian Portuguese adaptation of Dyslexia Early Screening Test - Second edition: preliminary findings.

    Science.gov (United States)

    Matta, Tatiana Ribeiro Gomes da; Befi-Lopes, Debora Maria

    2015-01-01

    The assessment of language skills in early childhood can provide important information about the future of literacy and academic performances. Children with reading difficulties should be identified early in their education, before they suffer from shortcomings and experience failures and feel discouraged at school. Considering the importance of early identification of language disorders and the shortage of standardized instruments for the Brazilian scenario, the overall objective of this study was to translate and adapt the Dyslexia Early Screening Test - Second Edition (DEST-2) to, subsequently, verify its applicability and efficacy in preschoolers who had Brazilian Portuguese as their native language. The study was composed of 20 children of both genders, regularly enrolled in a public school in the metropolitan region of São Paulo, none had any complaints related to learning and no indicators of sensory, neurological, cognitive, or behavioral disorders. It was observed that there was no need for significant changes to the original structure of the DEST-2 or in their administration instructions format. The performance of the children in the translated and in the national exams that were used as a benchmark was compatible, suggesting that the adjustments made met the equivalences needed to utilize this instrument with Brazilian children. A randomized study that will complement the preliminarily data obtained is in progress. Taking into consideration the linguistic and cultural diversity of Brazil, it is imperative that the translated version of the DEST-2 can be applied on a large scale and in several states of the country, in order to allow the use of this instrument as a language assessment tool in Brazil.

  11. Balance impairment in people with multiple sclerosis: preliminary evidence for the Balance Evaluation Systems Test.

    Science.gov (United States)

    Jacobs, Jesse V; Kasser, Susan L

    2012-07-01

    This study examined the validity of the Balance Evaluation Systems Test (BESTest) to identify balance impairments in people with multiple sclerosis (MS) by evaluating differences in BESTest performance between people with and without MS. We also assessed the BESTest's validity by correlation with objective measures of postural performance as well as with disease severity and fall status. Thirteen subjects with MS (Expanded Disability Status Scale; EDSS: 0-4.5) and 13 matched subjects without MS were evaluated on the BESTest, asked about fall history, and assessed by force plates and motion capture as they performed laboratory tasks of step initiation, forward leaning to the limits of stability, and postural responses to rotations of the support surface. Compared to subjects without MS, subjects with MS exhibited lower total BESTest scores (mean (95%) score for subjects with MS=91 (83-99); subjects without MS=105 (104-107)) as well as section scores pertaining to mechanical constraints, limits of stability, anticipatory postural adjustments, and gait. BESTest scores significantly correlated with objective laboratory measures of step velocity during step initiation (Pearson r(2)=0.48, P<0.01) as well as center-of-pressure displacements during both the leaning (Pearson r(2)=0.55, P<0.005) and postural-response tasks (Pearson r(2)=0.76, P<0.0001). BESTest total scores were 92% accurate to identify fallers and non-fallers, and BESTest scores significantly correlated with EDSS scores (Spearman's rho=0.85, P<0.0005). Thus, the BESTest provides a valid clinical assessment of balance impairments in people with MS.

  12. Overuse injuries in running

    DEFF Research Database (Denmark)

    Larsen, Lars Henrik; Rasmussen, Sten; Jørgensen, Jens Erik

    2016-01-01

    What is an overuse injury in running? This question is a corner stone of clinical documentation and research based evidence.......What is an overuse injury in running? This question is a corner stone of clinical documentation and research based evidence....

  13. Running to Extremes

    Institute of Scientific and Technical Information of China (English)

    PHILIP JONES

    2010-01-01

    @@ For some, simply running 21 km, or a full marathon at 42 kin, isn't enough of an achievement. I mean, you can run a marathon in almost every major city in the world and many of them are centerpiece events watched by a global audience.

  14. Preliminary tests for Salix sp. tolerance to heavy metals (Cd, Ni, Pb)

    Science.gov (United States)

    Corneanu, Mihaela; Hernea, Cornelia; Butnariu, Monica; Corneanu, Gabriel; Sărac, Ioan; Hollerbach, Wilhelm; Neţoiu, Constantin; Petcov, Andreea Adriana

    2014-05-01

    The species of Salix genus constitute potential sources of germplasm in the prevention of the environment degradation, and offer remedy for about two third from the all degradation types. The majority of the willow species, present a good adaptation to hypoxic conditions, feature which suggest that they manifest a preference for mineral nutrition in comparison with organic one. Thus, many of willow species can be developed on soils with a big amount of minerals and/or radionuclides, being both phytoremediatory species, as well as pioneer ones, contributing to the restoration of soil. Thus, the willow species, posses the capacity for development in degraded areas, natural or anthropic, as swamps, abandoning crops areas, sandy dune, riparian sandy areas, gravels, a.o. In this paper are present some laboratory comparative tests of heavy metals tolerance on four Salix sp. genotypes: clone 202 (Salix alba), hybrid 892 (Salix alba), Inger (Salix viminalis) and Gudrun (Salix viminalis). The genotypes of Salix alba are native from Romania, produced in the Forest Research and Management Institute Bucharest, while the genotypes of Salix viminalis are native from Sweden, but the plant material was produced under license in Romania by REBINA Agrar SRL. As plant material were used one-year-old cuttings (5-10 cm long), with 2-6 buds each. Per genotype, per heavy metal and each of three concentration five replication were used. There were ten experimental variants for each genotype: three concentrations for each of the heavy metals; concentrations selected, in the accordance SR ISO 11269-2/March 1999 and Control (tap water). The cuttings were maintained in metalic solutions for 15 days. In the days 7th and 15th, were performed biometrical observations on: the roots number and length, the shoots number and length, the leaves number/shoot, viability of the shoots. At the end of the experiment the content in heavy metals was determined in roots and shoots (by atomic absorption

  15. Speech and pause characteristics in multiple sclerosis: A preliminary study of speakers with high and low neuropsychological test performance

    Science.gov (United States)

    FEENAUGHTY, LYNDA; TJADEN, KRIS; BENEDICT, RALPH H.B.; WEINSTOCK-GUTTMAN, BIANCA

    2017-01-01

    This preliminary study investigated how cognitive-linguistic status in multiple sclerosis (MS) is reflected in two speech tasks (i.e. oral reading, narrative) that differ in cognitive-linguistic demand. Twenty individuals with MS were selected to comprise High and Low performance groups based on clinical tests of executive function and information processing speed and efficiency. Ten healthy controls were included for comparison. Speech samples were audio-recorded and measures of global speech timing were obtained. Results indicated predicted differences in global speech timing (i.e. speech rate and pause characteristics) for speech tasks differing in cognitive-linguistic demand, but the magnitude of these task-related differences was similar for all speaker groups. Findings suggest that assumptions concerning the cognitive-linguistic demands of reading aloud as compared to spontaneous speech may need to be re-considered for individuals with cognitive impairment. Qualitative trends suggest that additional studies investigating the association between cognitive-linguistic and speech motor variables in MS are warranted. PMID:23294227

  16. A new airborne Polar Nephelometer for the measurement of optical and microphysical cloud properties. Part II: Preliminary tests

    Directory of Open Access Journals (Sweden)

    O. Crépel

    Full Text Available A new optical sensor, the airborne Polar Nephelometer, has been tested in an open wind tunnel. The wind tunnel was operated in cloudy conditions including either cloud water droplets or ice crystals, or a mixture of these particles. The sensor is designed to measure the optical and microphysical parameters of cloud particles sized from a few micrometers to about 500 µm diameter. Basically, the probe measures the scattering phase function of an ensemble of cloud particles which intersect a collimated laser beam near the focal point of a paraboloidal mirror. From the measured scattering phase function the retrieval of the droplet-size spectra and subsequent derived quantities such as liquid water content and size parameters can be calculated using an inversion method. The particle phase discrimination (water droplets/ice particles can be derived from the shape of the scattering phase function and the sensitivity of the probe allows the detection of small ice crystals (typically of 5 µm diameter. The paper describes the preliminary results obtained by the prototype version of the Polar Nephelometer in various cloudy conditions. These results are compared with direct microphysical measurements obtained by usual PMS probes also mounted in the wind tunnel. Complementary results obtained in a cold chamber are presented in order to illustrate the reliability of the Polar Nephelometer in the presence of small ice crystals.

  17. Performance characteristics of selected immunoassays for preliminary test of 3,4-methylenedioxymethamphetamine, methamphetamine, and related drugs in urine specimens.

    Science.gov (United States)

    Hsu, Jui; Liu, Chiareiy; Liu, C P; Tsay, Wen-Ing; Li, Jih-Heng; Lin, Dong-Liang; Liu, Ray H

    2003-10-01

    Eight commercially available immunoassays for amphetamines (DRI Amphetamines, CEDIA DAU Amphetamines-Semiquantitative, EMIT d.a.u. Monoclonal Amphetamine/Methamphetamine, Synchron CX Systems AMPH, TDx/TDxFLx Amphetamine/Methamphetamine II, CEDIA Amphetamines/Ecstasy, COBAS INTEGRA Amphetamines, and Abuscreen((R)) OnLine HS Amphetamine/MDMA) are evaluated for their effectiveness in serving as the preliminary test methodology for the analysis of 3,4-methylenedioxymethamphetamine/3,4-methylenedioxyamphetamine (MDMA/MDA) and methamphetamine/amphetamine (MA/AM). Standard solutions (in urine matrix) of MDMA, MDA, MA, and AM are used to determine these immunoassays' reactivities (or cross-reactivities) toward these compounds of interest. Case specimens containing MDMA/MDA and MA/AM are also used to study the correlations of the apparent immunoassay MDMA (or MA) concentrations and the gas chromatographic-mass spectrometric concentrations of these compounds. Data resulting from this study suggest that CEDIA Amphetamines/Ecstasy can best predict the concentrations of MDMA and MA in case specimens and can also detect the presence of MDMA at low levels, whereas Abuscreen OnLine HS Amphetamine/MDMA can detect both MDMA and MA at low concentrations.

  18. Preliminary Testing of a Patient-Reported Outcome Measure for Recurrent or Metastatic Head and Neck Cancer.

    Science.gov (United States)

    Jackson, Leanne K; Deng, Jie; Ridner, Sheila H; Gilbert, Jill; Dietrich, Mary S; Murphy, Barbara A

    2016-05-01

    We describe development and preliminary testing of Vanderbilt Head and Neck Symptom Survey-Recurrent/Metastatic (VHNSS-RM) to assess residual symptoms, tumor-related symptoms, and side effects from therapy. Items were identified through patient and provider interviews. Card sort selected high-yield and high-impact items. The VHNSS-RM was administered to 50 patients with recurrent/metastatic head and neck cancer (RMHNC). The VHNSS-RM includes 12 unique symptoms (diet change, tongue movement affecting speech/swallowing, face/neck swelling, neck/jaw cramping, bad breath, drooling, wound drainage/pain/odor, nasal congestion/drainage, eyes watering, face/tongue/ear/scalp numbness, headaches, and confusion) and 7 unique psychosocial issues (burden to family/friends, lost independence, fear, embarrassment, mood swings, stress, and boredom). The VHNSS-RM contains 35 physical and 12 psychosocial issues. The VHNSS-RM is feasible and not overly burdensome. Nineteen unique items may improve palliation to patients with RMHNC. © The Author(s) 2015.

  19. A Preliminary Test of the Interpersonal-Psychological Theory of Suicide in Women Seeking Shelter From Intimate Partner Violence.

    Science.gov (United States)

    Wolford-Clevenger, Caitlin; Smith, Phillip N; Kuhlman, Shane; D'Amato, Darcey

    2016-07-25

    Women seeking shelter from intimate partner violence (IPV) are at greater risk of suicide ideation and attempts compared with women in the general population. A theoretically grounded understanding of suicide risk in shelter-seeking women is critical to improve assessment and management of suicide risk in this population. The interpersonal-psychological theory of suicide (IPTS) proposes that suicide ideation results from hopelessness about thwarted belongingness and perceived burdensomeness. However, suicide ideation does not progress to death by suicide unless one has acquired the capability for suicide (i.e., pain tolerance and fearlessness about death) via repeated exposure to painful and fearsome events. The present study provides a preliminary test of the IPTS in a sample of 134 women seeking shelter from IPV. First, we examined factors theoretically related to suicide ideation, demonstrating that only at high levels of hopelessness was perceived burdensomeness associated with suicide ideation. The study also examined factors theoretically related to the acquired capability for suicide (ACS), indicating that physical partner violence perpetration was associated with ACS. These findings suggest that perceived burdensomeness, particularly in the context of increased hopelessness, is important in the assessment and treatment of suicide ideation. Furthermore, violence perpetration may indicate greater risk of the capability to die by suicide among women seeking shelter from IPV. © The Author(s) 2016.

  20. Preliminary PINC(Program for the Inspection of Nickel Alloy Components) RRT(Round Robin Test) - Pressurizer Dissimilar Metal Weld

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Cho; Kang, Sung Sik; Shin, Ho Sang; Chung, Ku Kab; Song, Myung Ho; Chung, Hae Dong [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2009-06-15

    After several damages by PWSCC were found in the world, USNRC and PNNL(Pacific Northwest National Laboratory) started the research on PWSCC under the project name of PINC. The aim of the project was 1) to fabricate representative NDE mock-ups with flaws to simulate PWSCCs, 2) to identify and quantitatively assess NDE methods for accurately detecting, sizing and characterizing PWSCCs, 3) to document the range of locations and morphologies of PWSCCs and 4) to incorporate results with other results of ongoing PWSCC research programs, as appropriate. Korea nuclear industries have also been participating in the project. Thermally and mechanically cracked-four mockups were prepared and phased array and manual ultrasonic testing(UT) techniques were applied. The results and lessons learned from the preliminary RRT are summarized as follows: 1) Korea RRT teams performed the RRT successfully. 2) Crack detection probability of the participating organizations was an average 87%, 80% and 80% respectively. 3) RMS error of the crack sizing showed comparatively good results. 4) The lessons learned may be helpful to perform the PINC RRT and PSI /ISI in Korea in the future.

  1. Buckling Test Results and Preliminary Test and Analysis Correlation from the 8-Foot-Diameter Orthogrid-Stiffened Cylinder Test Article TA02

    Science.gov (United States)

    Hilburger, Mark W.; Waters, W. Allen, Jr.; Haynie, Waddy T.; Thornburgh, Robert P

    2017-01-01

    Results from the testing of cylinder test article SBKF-P2-CYL-TA02 (referred to herein as TA02) are presented. TA02 is an 8-foot-diameter (96-inches), 78.0-inch-long, aluminum-lithium (Al-Li), orthogrid-stiffened cylindrical shell similar to those used in current state-of-the-art launch-vehicle structures and was designed to exhibit global buckling when subjected to combined compression and bending loads. The testing was conducted at the Marshall Space Flight Center (MSFC), February 3-6, 2009, in support of the Shell Buckling Knockdown Factor Project (SBKF). The test was used to verify the performance of a newly constructed buckling test facility at MSFC and to verify the test article design and analysis approach used by the SBKF researchers.

  2. Preliminary results of the echo-seeding experiment at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, D.; Colby, E.; Ding, Y.; Dunning, M.; Frederico, J.; Gilevich, S.; Hast, C.; Jobe, K.; McCormick, D.; Nelson, J.; Raubenheimer, T.O.; Soong, K.; Stupakov, G.; Szalata, Z.; Walz, D.; Weathersby, S.; Woodley, M.; Corlett, J.; Qiang, J.; Penn, G.; Prestemon, S.; Schlueter, R.; Venturini, M.; Wan, W.; Pernet, P-L.

    2010-05-23

    ECHO-7 is a proof-of-principle echo-enabled harmonic generation FEL experiment in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The experiment aims to generate coherent radiation at 318 nm and 227 nm, which are the 5th and 7th harmonic of the infrared seed laser. In this paper we present the preliminary results from the commissioning run of the completed experimental setup which started in April 2010.

  3. Design for High-speed Ball Screw Running-life Test Machine Based on Linear Motor%基于直线电机的高速滚珠丝杠副寿命试验机设计

    Institute of Scientific and Technical Information of China (English)

    童亮; 王准

    2014-01-01

    A high-speed ball screw running-life test machine based on a linear motor was designed according to the testing requirements for the high-speed ball screw.A high-speed ball screw running-life test machine which used the linear motor as the loading mechanism,the rotation servo motor for the screw drive mechanism and the programmable multi-axis controller as motion controller,was de-signed and met the testing requirements of life testing and related parameters of the ball screw in the case of the long-running high-speed,high acceleration,big load under the conditions of continuous sta-ble varying loading.The test results demonstrate the feasibility of the system.%针对高速滚珠丝杠副性能指标的测量需求,设计了一套基于直线电机的高速滚珠丝杠副寿命测试试验系统,系统以直线电机为加载机构、旋转伺服电机为丝杠驱动机构、多轴运动控制卡为运动控制器。据此系统设计的滚珠丝杠副高速加载跑合寿命试验机在连续稳定变负载的情况下,可以对滚珠丝杠在高速、高加速度、大负荷等条件下进行长时间运行测试,满足寿命试验机对滚珠丝杠副寿命试验和相关参数的测试要求。试验结果证明了系统的可行性。

  4. Energetics of bipedal running. II. Limb design and running mechanics.

    Science.gov (United States)

    Roberts, T J; Chen, M S; Taylor, C R

    1998-10-01

    Compared with quadrupeds, bipedal runners of the same weight have longer legs, take longer steps and can presumably use slower, more economical muscle fibers. One might predict that bipedal running is less expensive, but it is not. We hypothesized that bipeds recruit a larger volume of muscle to support their weight, eliminating the potential economy of longer legs and slower steps. To test our hypothesis, we calculated the relative volume of muscle needed to support body weight over a stride in small dogs (Canis familiaris) and wild turkeys (Meleagris gallopavo) of the same weight. First, we confirmed that turkeys and dogs use approximately the same amount of energy to run at the same speed, and found that turkeys take 1. 8-fold longer steps. Higher muscle forces and/or longer muscle fibers would require a greater volume of active muscle, since muscle volume is proportional to the product of force and fascicle length. We measured both mean fascicle length and mean mechanical advantage for limb extensor muscles. Turkeys generated approximately the same total muscle force to support their weight during running and used muscle fascicles that are on average 2.1 times as long as in dogs, thus requiring a 2.5-fold greater active muscle volume. The greater volume appears to offset the economy of slower rates of force generation, supporting our hypothesis and providing a simple explanation for why it costs the same to run on two and four legs.

  5. Preliminary tests in skull pediatric phantom for dosimetry in computerized tomography; Testes preliminares em um simulador pediatrico de cranio para dosimetria em tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Elaine Wirney; Potiens, Maria da Penha de A., E-mail: elainewirney@uso.br, E-mail: mppalbu@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    Computed tomography (CT) is one of the techniques in the field of radiology with striking technological advance in recent years. One reason for this was the increased number of channels associated with the increased power of the X-ray tube. These conditions allowed the equipment high speed in the acquisition of the cuts, reducing the patient exposure time essential characteristic for the increase of its use in pediatric patients. In this context, were developed a new pediatric skull simulator to analyze the results of measurements performed in laboratory and clinic beams with the objective of creation and use of diagnostic reference levels observing risks stochastic effects and assessing the reduction of absorbed doses in patients undergoing growing. Preliminary tests performed in clinical beams showed C{sub w} values: 2.525 ± 0.212 mGy for the developed simulator quoted and 3.362 ± 0.282 mGy for a simulator developed by IPEN called standard, both being between uncertainty values of 8.4% and 14.4% suggested by TRS number 457.

  6. On the Run

    Institute of Scientific and Technical Information of China (English)

    MICHAEL; GOLD

    2009-01-01

    Istarted running at age 14, inspired in equal parts by an incipient teenage desire for athletic greatness, the movie Personal Best, and the fact that all my classmates on sports teams got a free period during gym class.

  7. Learning to Run

    Institute of Scientific and Technical Information of China (English)

    Wei Jiafu

    2006-01-01

    @@ In Africa, there live antelopes and lions.In the morning, the antelope wakes up from sleep. His first sense is that he has to run faster than the fastest lion, otherwise, he will be eaten out. In the meanwhile, when the lion opens his eyes, his first thought is he must run faster than the slowest antelope,otherwise, he will starve to death.

  8. Theoretical analyses and numerical simulations of the torsional mode for two acoustic viscometers with preliminary experimental tests.

    Science.gov (United States)

    Ai, Yuhui; Lange, Rebecca A

    2008-03-01

    A rigorous analysis of the torsional modes in both a cylindrical wave guide and the associated static viscous fluid field has been conducted from the solid and the fluid wave equations and the coupled boundary conditions. As a result, two acoustic viscometer models, along with four independent equations connecting the density and the viscosity of the fluid with the attenuation and the phase velocity of the torsional wave in the wave guide, have been developed. The analysis shows that the product of the viscosity and the density of the fluid can be measured from the end reflection coefficient of the torsional wave in the wave guide and that both the viscosity and the density can be determined simultaneously from either the phase velocity or the attenuation of the torsional wave in a single cylindrical wave guide. For the simultaneous measurements of the viscosity and the density, the independent equations have to be solved numerically, for example, using Matlab (The MathWorks, Natick, MA), given either the attenuation or the phase velocity in the wave guide that is surrounded by the fluid. To demonstrate the technical feasibility, numerical simulations have been conducted to discern viscosity, phase velocity, and density, all versus attenuation, at different frequencies, and with variable dimension of a molybdenum rod, so that both the advantages and the disadvantages of the simultaneous measurements can be explored. In the end, to test the two models, preliminary experiments on two viscous standards were conducted at 23 degrees C, and good agreements have been achieved between the viscosities measured from both models and for both standards.

  9. É possível determinar a economia de corrida através do teste progressivo até a exaustão? Is possible to predict running economy using maximal incremental exercise test?

    Directory of Open Access Journals (Sweden)

    Rômulo Cássio de Moraes Bertuzzi

    2010-09-01

    Full Text Available O objetivo do presente estudo foi verificar a possibilidade de se estimar a economia de corrida (EC a partir do coeficiente angular gerado pela relação VO2 vs. intensidade de testes progressivos até a exaustão (EC INCLINA. Para tanto, 16 corredores de provas de longa duração (idade 32 ± 7 anos, massa corporal 70,0 ± 6,7 kg, estatura 173,3 ± 5,0 cm, O2máx 57,9 ± 5,8 ml·kg-1·min-1 foram submetidos a um teste incremental e a dois testes de cargas constantes (12 km·h-1 e a intensidade de 90% do segundo limiar ventilatório para a mensuração da EC. Foram detectadas correlações fracas entre o EC INCLINA e a EC estabelecida a 12 km·h-1 (r = 0,49; p = 0,054 e na intensidade de 90% do segundo limiar ventilatório (r = 0,55; p = 0,027. Além disso, o EC INCLINA também estava negativamente correlacionado com a concentração sanguínea de lactato (r = -0,75; p = 0,001 e a razão de troca respiratória (r = -0,80; p The purpose of the present study was to investigate the association between running economy (RE and the slope of the regression line obtained as the individual relationship between oxygen uptake and the corresponding intensity in the incremental test (EC INCLINA. Sixteen recreational long-distance runners (age 32 ± 7 years, body mass 70,0 ± 6.7 kg, height 173.3 ± 5.0 cm, VO2max 57.9 ± 5.8 ml·kg-1·min-1 performed a progressive incremental test and two submaximal workload tests (at 12 km·h-1 and 90% second ventilatory threshold to determine the RE. There was significant correlation between EC INCLINA and RE measured at 12 km·h-1 (r = 0.49; p = 0.054 and at 90% second ventilatory threshold (r = 0.55; p = 0.027. In addition, EC INCLINA also was negatively correlated with peak blood lactate (r = -0.75; p = 0.001 and peak respiratory exchange rate (r = -0.80; p < 0.001. These findings suggest that EC INCLINA would be an alternative parameter employed to determine the endurance performance in recreational long

  10. 油管悬挂器及下放工具性能鉴定试验方法∗%Performance Identification Test Method for Tubing Hanger and Running Tool

    Institute of Scientific and Technical Information of China (English)

    陈萌; 张来斌; 郑文培; 柴亚军; 段梦兰; 李荣

    2016-01-01

    Performance identification test method for tubing hanger and running tool can guarantee product performance and reliability and it is of great significance on reducing the possibility of potential accidents� Basic concept and objectives of the performance identification test are described on the basis of introduction to structure and function of the tubing hanger and running tool� Based on related standards and characteristics of research ob⁃ject, a performance identification test method is proposed for horizontal christmas tree tubing hanger and running tool� This method specifically divides the test process into test preparation, testing process and summary after tes⁃ting and adds the analysis on fault mode and effect of tested object and fault handling program in the test; it can give specific acceptance or failure criteria for different test objects and test items based on actual conditions and re⁃lated standard regulations� The conclusion is of great significance on guaranteeing operation safety of subsea christ⁃mas tree.%对油管悬挂器及其下放工具进行性能鉴定试验能确保产品的性能和可靠性,对于减小潜在事故发生的可能性具有重要意义。在介绍油管悬挂器及其下放工具结构功能的基础上,阐述了性能鉴定试验的基本概念及目的,参考相关标准并结合所研究对象的特点,提出了一套卧式采油树油管挂及其下放工具的性能鉴定试验方法。该方法将试验过程详细划分为试验准备、试验运行及试验后总结3个阶段,增加了对受试物体的故障模式和影响分析以及试验过程中故障的处理程序等;同时能针对不同的试验对象及试验项目,结合实际情况和相关标准中的规定,给出具体的接受或失效判据。所得结论对保证水下采油树安全运行意义重大。

  11. Driving-Simulator-Based Test on the Effectiveness of Auditory Red-Light Running Vehicle Warning System Based on Time-To-Collision Sensor

    Directory of Open Access Journals (Sweden)

    Xuedong Yan

    2014-02-01

    Full Text Available The collision avoidance warning system is an emerging technology designed to assist drivers in avoiding red-light running (RLR collisions at intersections. The aim of this paper is to evaluate the effect of auditory warning information on collision avoidance behaviors in the RLR pre-crash scenarios and further to examine the casual relationships among the relevant factors. A driving-simulator-based experiment was designed and conducted with 50 participants. The data from the experiments were analyzed by approaches of ANOVA and structural equation modeling (SEM. The collisions avoidance related variables were measured in terms of brake reaction time (BRT, maximum deceleration and lane deviation in this study. It was found that the collision avoidance warning system can result in smaller collision rates compared to the without-warning condition and lead to shorter reaction times, larger maximum deceleration and less lane deviation. Furthermore, the SEM analysis illustrate that the audio warning information in fact has both direct and indirect effect on occurrence of collisions, and the indirect effect plays a more important role on collision avoidance than the direct effect. Essentially, the auditory warning information can assist drivers in detecting the RLR vehicles in a timely manner, thus providing drivers more adequate time and space to decelerate to avoid collisions with the conflicting vehicles.

  12. Preliminary data for northern Great Plains test well 1, quarter NE quarter Sec. 11, T.55N., R.77W., Sheridan County, Wyoming

    Science.gov (United States)

    Lobmeyer, D.H.; Anna, L.O.; Busby, J.F.

    1982-01-01

    This report documents the preliminary data obtained from Northern Great Plains test well 1 and describes the preliminary results and future testing plans. The intended audience includes hydrologists, local water users, drilling contractors, and water managers. The test well was drilled as part of the study to determine the water resource potential of the regional aquifer system in the Northern Great Plains, an area of about 250,000 sq mi. The well is 4,485 ft deep; nine cores were drilled totaling 182 ft; 157.42 ft of core were recovered. Sidewall cores were obtained from 24 horizons. Gamma and density scans of the cores were made, and selected parts were tested for density, porosity, and vertical and horizontal permeability. Eight zones were perforated and tested using conventional drill-stem tests and swabbing. Water samples were obtained from seven zones. No major potential sources of groundwater were penetrated by the test well. Estimated yields from selected zones range from about 240 gal/min with 400 ft of drawdown to about 5 gal/min flow at the surface. Dissolved-solids concentrations ranged from about 1,800 to 3,000 mg/l. (USGS)

  13. Running Boot Camp

    CERN Document Server

    Toporek, Chuck

    2008-01-01

    When Steve Jobs jumped on stage at Macworld San Francisco 2006 and announced the new Intel-based Macs, the question wasn't if, but when someone would figure out a hack to get Windows XP running on these new "Mactels." Enter Boot Camp, a new system utility that helps you partition and install Windows XP on your Intel Mac. Boot Camp does all the heavy lifting for you. You won't need to open the Terminal and hack on system files or wave a chicken bone over your iMac to get XP running. This free program makes it easy for anyone to turn their Mac into a dual-boot Windows/OS X machine. Running Bo

  14. Prevention of running injuries.

    Science.gov (United States)

    Fields, Karl B; Sykes, Jeannie C; Walker, Katherine M; Jackson, Jonathan C

    2010-01-01

    Evidence for preventive strategies to lessen running injuries is needed as these occur in 40%-50% of runners on an annual basis. Many factors influence running injuries, but strong evidence for prevention only exists for training modification primarily by reducing weekly mileage. Two anatomical factors - cavus feet and leg length inequality - demonstrate a link to injury. Weak evidence suggests that orthotics may lessen risk of stress fracture, but no clear evidence proves they will reduce the risk of those athletes with leg length inequality or cavus feet. This article reviews other potential injury variables, including strength, biomechanics, stretching, warm-up, nutrition, psychological factors, and shoes. Additional research is needed to determine whether interventions to address any of these will help prevent running injury.

  15. From Walking to Running

    Science.gov (United States)

    Rummel, Juergen; Blum, Yvonne; Seyfarth, Andre

    The implementation of bipedal gaits in legged robots is still a challenge in state-of-the-art engineering. Human gaits could be realized by imitating human leg dynamics where a spring-like leg behavior is found as represented in the bipedal spring-mass model. In this study we explore the gap between walking and running by investigating periodic gait patterns. We found an almost continuous morphing of gait patterns between walking and running. The technical feasibility of this transition is, however, restricted by the duration of swing phase. In practice, this requires an abrupt gait transition between both gaits, while a change of speed is not necessary.

  16. Preliminary Derivation of Test Item Clusters for Predicting Injuries, Poor Physical Performance, and Overall Attrition in Basic Combat Training

    Science.gov (United States)

    2006-12-01

    examination and patient self-report measures for cervical radiculopathy. Spine. Jan 1 2003;28(1):52-62. 36 11. Wainner RS, Fritz JM, Irrgang JJ...foot orthosis use and modified activity: a preliminary investigation. Phys Ther. Jan 2004;84(1):49-61. 18. Solomon DH, Avorn J, Warsi A, et al

  17. The Art of Running

    Science.gov (United States)

    Brown, Jill Harris

    2007-01-01

    Every year, the Parent-Teacher Association of Ferndale Elementary School in Atlanta, Georgia sponsors a fun road race for the students, teachers, families, and community. This annual event has inspired the author to develop the Running and Art project to show off her students' art and squeeze in a little art history, too. In this article, the…

  18. Optimizing Running Performance.

    Science.gov (United States)

    Widule, Carol J.

    1989-01-01

    The optimization of step length and step rate (frequency) is essential for sprinters. This article analyzes data that compare step rate and step length to height, as a function of running speed, for ten elite runners. How results of such analyses can be used in training runners is also discussed. (IAH)

  19. A new method of calculating the running coupling constant --- theoretical formulation ---

    CERN Document Server

    Bilgici, E; Itou, E; Kurachi, M; Lin, C -J D; Matsufuru, H; Ohki, H; Onogi, T; Yamazaki, T

    2008-01-01

    We propose a new method to compute the running coupling constant of gauge theories on the lattice. We first give the definition of the running coupling in the new scheme using the Wilson loops in a finite volume, and explain how the running of the coupling constant is extracted from the measurement of the volume dependence. The perturbative calculation of the renormalization constant to define the scheme is also given at the leading order. As a benchmark test of the new scheme we apply the method the case of the quenched QCD. We show the preliminary result from our numerical simulations which are carried out with plaquette gauge action for various lattice sizes and bare lattice couplings. With techniques to improve the statistical accuracy, we show that we can determine the non-perturbative running of the coupling constant in a wide range of the energy scale with relatively small number of gauge configurations in our scheme. We compare our lattice data of the running coupling constant with perturbative renorm...

  20. Preliminary experimental results using the thermal-hydraulic integral test facility (VISTA) for the pilot plant of the system integrated modular advanced reactor, SMART-P

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Ki Yong; Pak, Hyun Sik; Cho, Seok; Pak, Choon Kyung; Lee, Sung Jae; Song, Chul Hwa; Chung, Moon Ki [KAERI, Taejon (Korea, Republic of)

    2003-07-01

    Preliminary experimental tests were carried out using the thermal-hydraulic integral test facility, VISTA (Experimental Verification by Integral Simulation of Transients and Accidents), which has been constructed to simulate the SMART-P. The VISTA facility is an integral test facility including the primary and secondary systems as well as safety-related Passive Residual heat removal (PRHR) systems. Its scaled ratio with respect to the SMART-P is 1/1 in height and 1/96 in volume and heater power. So far, several steady states and transient tests have been carried out to verify the overall thermal hydraulic primary and secondary characteristics in a range of 10% to 100% power operation. As results of preliminary results, the steady state conditions were found to coincide with the expected design values of the SMART-P. But the major thermal hydraulic parameters are greatly affected by the initial water level and the nitrogen pressure in the reactor upper annular cavity. In the PRHR transient tests, the steam inlet temperature of the PRHR system is found to drop suddenly from a superheated condition to a saturated condition at the end period of PRHR operation.

  1. The 'X60' CORADIA LIREX trains for Stockholm's regional-express system. Results of test and approval runs; Der S-Bahntriebzug CORADIA LIREX fuer Stockholm (X 60). Ergebnisse der Erprobungs- und Zulassungsversuche

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, G.; Fischer, C. [ALSTOM LHB GmbH, Salzgitter (Germany)

    2005-11-01

    It was back in spring 2002 that Transitio (a company specialized in the provision of rolling stock) ordered 55 new regional-express train sets for the network around the Swedish capital. Even before all the tenders had been processed and contracts awarded, it had emerged clearly that, in addition to financial considerations, the requirements regarding safety, reliability, comfort and impacts on the environment were going to play an above-average role. For this reason, very detailed technical solutions were included in proposals and these were refined even further during the subsequent contract negotiations, going as far as including definitions of how the above-mentioned aspects were to be technically tested. The authors report on the outcome of the programme of tests and the approval runs with the new trains. (orig.)

  2. Comparison of fractions of inactive modules between Run1 and Run2

    CERN Document Server

    Motohashi, Kazuki; The ATLAS collaboration

    2015-01-01

    Fraction of inactive modules for each component of the ATLAS pixel detector at the end of Run 1 and the beginning of Run 2. A similar plot which uses a result of functionality tests during LS1 can be found in ATL-INDET-SLIDE-2014-388.

  3. Running kinematics and shock absorption do not change after brief exhaustive running.

    Science.gov (United States)

    Abt, John P; Sell, Timothy C; Chu, Yungchien; Lovalekar, Mita; Burdett, Ray G; Lephart, Scott M

    2011-06-01

    Because of the nature of running, the forces encountered require a proper coordination of joint action of the lower extremity to dissipate the ground reaction forces and accelerations through the kinetic chain. Running-related muscle fatigue may reduce the shock absorbing capacity of the lower extremity and alter running kinematics. The purpose of this study was to determine if a bout of exhaustive running at a physiologically determined high intensity, changes running kinematics, impact accelerations, and alters shock attenuating capabilities. It was hypothesized that as a result of fatigue induced by an exhaustive run, running kinematics, impact accelerations at the head and shank, acceleration reduction, and shock attenuation would change. A within-subject, repeated-measures design was used for this study. Twelve healthy, competitive male and female distance runners participated. Subjects performed 2 testing sessions consisting of a VO2max treadmill protocol to determine the heart rate at ventilatory threshold and a fatigue-inducing running bout at the identified ventilatory threshold heart rate. Kinematic data included knee flexion, pronation, time to maximum knee flexion, and time to maximum pronation. Acceleration data included shank acceleration, head acceleration, and shock attenuation. No significant differences resulted for the kinematic or acceleration variables. Although the results of this study do not support the original hypotheses, the influence of running fatigue on kinematics and accelerations remains inconclusive. Future research is necessary to examine fatigue-induced changes in running kinematics and accelerations and to determine the threshold at which point the changes may occur.

  4. DEEP-South: Preliminary Photometric Results from the KMTNet-CTIO

    Science.gov (United States)

    Kim, Myung-Jin; Moon, Hong-Kyu; Choi, Young-Jun; Yim, Hong-Suh; Bae, Young-Ho; Roh, Dong-Goo; Park, Jin Tae; Moon, Bora

    2016-01-01

    Korea Astronomy and Space Science Institute (KASI) successfully completed the development of Korea Microlensing Telescope Network (KMTNet, Park et al. 2012) in mid-2015, following which it conducted test runs for several months. `DEep Ecliptic Patrol of the Southern sky' (DEEP-South, Moon et al. 2015), which will be used for asteroid and comet studies, will not only characterize targeted asteroids, carrying out blind surveys toward the sweet spots, but will also mine the data of such bodies using the KMTNet archive. We report preliminary lightcurves of four Potentially Hazardous Asteroids (PHAs) from test runs at KMTNet-CTIO in the February - May 2015 period.

  5. Does Addiction Run in Families?

    Science.gov (United States)

    ... Addiction? » Does Addiction Run in Families? Does Addiction Run in Families? Listen PDF: EasyToRead_WhatIsAddiction_Final_ ... English Español "Heart disease runs in some families. Addiction runs in ours." ©istock.com/ Antonio_Diaz Matt's ...

  6. The Running Gravitational Couplings

    OpenAIRE

    Dou, Djamel; Percacci, Roberto

    1997-01-01

    We compute the running of the cosmological constant and Newton's constant taking into account the effect of quantum fields with any spin between 0 and 2. We find that Newton's constant does not vary appreciably but the cosmological constant can change by many orders of magnitude when one goes from cosmological scales to typical elementary particle scales. In the extreme infrared, zero modes drive the cosmological constant to zero.

  7. PEP Run Report for Integrated Test A, Caustic Leaching in UFP-VSL-T01A, Oxidative Leaching in UFP-VSL-T02A

    Energy Technology Data Exchange (ETDEWEB)

    Guzman-Leong, Consuelo E.; Bredt, Ofelia P.; Burns, Carolyn A.; Daniel, Richard C.; Su, Yin-Fong; Geeting, John GH; Golovich, Elizabeth C.; Josephson, Gary B.; Kurath, Dean E.; Sevigny, Gary J.; Smith, Dennese M.; Valdez, Patrick LJ; Yokuda, Satoru T.; Young, Joan K.

    2009-12-04

    Pacific Northwest National Laboratory (PNNL) was tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed and constructed and operated as part of a plan to respond to issue M12, “Undemonstrated Leaching Processes.”(a) The PEP, located in the Process Engineering Laboratory-West (PDLW) located in Richland, Washington, is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. The PEP also includes non-prototypic ancillary equipment to support the core processing.

  8. Pretreatment Engineering Platform (PEP) Integrated Test B Run Report--Caustic and Oxidative Leaching in UFP-VSL-T02A

    Energy Technology Data Exchange (ETDEWEB)

    Geeting, John GH; Bredt, Ofelia P.; Burns, Carolyn A.; Golovich, Elizabeth C.; Guzman-Leong, Consuelo E.; Josephson, Gary B.; Kurath, Dean E.; Sevigny, Gary J.; Aaberg, Rosanne L.

    2009-12-10

    Pacific Northwest National Laboratory (PNNL) has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed and operated as part of a plan to respond to issue M12, “Undemonstrated Leaching Processes” of the External Flowsheet Review Team (EFRT) issue response plan.( ) The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. The PEP also includes non-prototypic ancillary equipment to support the core processing.

  9. Towards Run-time Assurance of Advanced Propulsion Algorithms

    Science.gov (United States)

    Wong, Edmond; Schierman, John D.; Schlapkohl, Thomas; Chicatelli, Amy

    2014-01-01

    This paper covers the motivation and rationale for investigating the application of run-time assurance methods as a potential means of providing safety assurance for advanced propulsion control systems. Certification is becoming increasingly infeasible for such systems using current verification practices. Run-time assurance systems hold the promise of certifying these advanced systems by continuously monitoring the state of the feedback system during operation and reverting to a simpler, certified system if anomalous behavior is detected. The discussion will also cover initial efforts underway to apply a run-time assurance framework to NASA's model-based engine control approach. Preliminary experimental results are presented and discussed.

  10. 40 CFR 86.1237-85 - Dynamometer runs.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Dynamometer runs. 86.1237-85 Section... Methanol-Fueled Heavy-Duty Vehicles § 86.1237-85 Dynamometer runs. (a) The vehicle shall be either driven... the diurnal loss test and beginning of the hot soak preparation run shall not exceed 3 minutes,...

  11. Running With an Elastic Lower Limb Exoskeleton.

    Science.gov (United States)

    Cherry, Michael S; Kota, Sridhar; Young, Aaron; Ferris, Daniel P

    2016-06-01

    Although there have been many lower limb robotic exoskeletons that have been tested for human walking, few devices have been tested for assisting running. It is possible that a pseudo-passive elastic exoskeleton could benefit human running without the addition of electrical motors due to the spring-like behavior of the human leg. We developed an elastic lower limb exoskeleton that added stiffness in parallel with the entire lower limb. Six healthy, young subjects ran on a treadmill at 2.3 m/s with and without the exoskeleton. Although the exoskeleton was designed to provide ~50% of normal leg stiffness during running, it only provided 24% of leg stiffness during testing. The difference in added leg stiffness was primarily due to soft tissue compression and harness compliance decreasing exoskeleton displacement during stance. As a result, the exoskeleton only supported about 7% of the peak vertical ground reaction force. There was a significant increase in metabolic cost when running with the exoskeleton compared with running without the exoskeleton (ANOVA, P exoskeletons for human running are human-machine interface compliance and the extra lower limb inertia from the exoskeleton.

  12. A luminosity model of RHIC gold runs

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, S.Y.

    2011-11-01

    In this note, we present a luminosity model for RHIC gold runs. The model is applied to the physics fills in 2007 run without cooling, and with the longitudinal cooling applied to one beam only. Having good comparison, the model is used to project a fill with the longitudinal cooling applied to both beams. Further development and possible applications of the model are discussed. To maximize the integrated luminosity, usually the higher beam intensity, smaller longitudinal and transverse emittance, and smaller {beta} are the directions to work on. In past 10 years, the RHIC gold runs have demonstrated a path toward this goal. Most recently, a successful commissioning of the bunched beam stochastic cooling, both longitudinal and transverse, has offered a chance of further RHIC luminosity improvement. With so many factors involved, a luminosity model would be useful to identify and project gains in the machine development. In this article, a preliminary model is proposed. In Section 2, several secondary factors, which are not yet included in the model, are identified based on the RHIC operation condition and experience in current runs. In Section 3, the RHIC beam store parameters used in the model are listed, and validated. In Section 4, the factors included in the model are discussed, and the luminosity model is presented. In Section 5, typical RHIC gold fills without cooling, and with partial cooling are used for comparison with the model. Then a projection of fills with more coolings is shown. In Section 6, further development of the model is discussed.

  13. Can the Ordered Multi-Stepping Over Hoop test be useful for predicting fallers among older people? A preliminary 1 year cohort study.

    Science.gov (United States)

    Tsutsumimoto, Kota; Doi, Takehiko; Misu, Shogo; Ono, Rei; Hirata, Soichiro

    2013-08-01

    To prevent falls among older people, we developed a new fall-risk assessment, the "Ordered Multi-Stepping Over Hoop (OMO)" test. The aims of this study were preliminary: to investigate the association of the OMO with cognitive and physical function and to investigate whether the OMO could predict incidents of falling. Fifty-nine community-dwelling older people (mean age = 88.0 ± 0.87, female = 49) were recruited. We assessed cognitive and physical function including the OMO test at baseline and monitored the falls of participants during a 12-month follow-up period from the baseline. We investigated whether the OMO was associated with cognitive function, physical function, and incidents of falling. To investigate whether the OMO could predict incidents of falling, a receiver operating characteristic analysis was conducted. The OMO time in fallers was significantly slower than for non-fallers. There were significant correlations between slower OMO times and lower physical functions and executive function. The area under the ROC curve in the OMO was 0.71 (p OMO identified those more likely to fall. The OMO time was correlated with cognitive function, physical function, and incidents of falling. Our preliminary study indicates that the OMO may help to make a distinction between fallers and non-fallers among older people as effectively as other tests.

  14. Run-Time Data-Flow Analysis

    Institute of Scientific and Technical Information of China (English)

    李剑慧; 臧斌宇; 吴蓉; 朱传琪

    2002-01-01

    Parallelizing compilers have made great progress in recent years. However, there still remains a gap between the current ability of parallelizing compilers and their final goals.In order to achieve the maximum parallelism, run-time techniques were used in parallelizing compilers during last few years. First, this paper presents a basic run-time privatization method.The definition of run-time dead code is given and its side effect is discussed. To eliminate the imprecision caused by the run-time dead code, backward data-flow information must be used.Proteus Test, which can use backward information in run-time, is then presented to exploit more dynamic parallelism. Also, a variation of Proteus Test, the Advanced Proteus Test, is offered to achieve partial parallelism. Proteus Test was implemented on the parallelizing compiler AFT.In the end of this paper the program fpppp.f of Spec95fp Benchmark is taken as an example, to show the effectiveness of Proteus Test.

  15. Testes de broncoprovocação com metacolina e com exercício em bicicleta e corrida livre em crianças com asma intermitente Bronchial provocation tests using methacholine, cycle ergometer exercise and free running in children with intermittent asthma

    Directory of Open Access Journals (Sweden)

    Ana C. T. G. Souza

    2005-02-01

    Full Text Available OBJETIVO: Comparar a responsividade de vias aéreas à metacolina e ao teste de exercício na bicicleta ergométrica e corrida livre em crianças com asma intermitente. MÉTODOS: Estudo randomizado. Trinta crianças de ambos os sexos com asma intermitente participaram do estudo. Cada teste foi realizado em 3 dias diferentes, através de randomização: a broncoprovocação com metacolina, método do dosímetro; b teste de exercício: corrida livre em um corredor de 50 m; c teste de exercício: bicicleta ergométrica com ar seco. A freqüência cardíaca atingida foi 80 a 90% da freqüência cardíaca máxima. A espirometria foi realizada aos 3, 6, 10, 15, 20 e 30 minutos após o exercício. Broncoespasmo induzido por exercício foi definido como a queda de volume expiratório forçado no primeiro segundo (VEF1 > 10% em relação aos valores pré-teste. RESULTADOS: A média de idade foi 11±3 anos. O VEF1 e VEF1/CVF (capacidade vital forçada foram normais e similares antes dos três testes de broncoprovocação. A freqüência cardíaca máxima foi de 178±7 bpm durante o exercício na bicicleta e 181±6 bpm na corrida livre (p > 0,05. Broncoespasmo significante foi visto em 23 crianças após o teste com metacolina, em 19 após a corrida livre e em 14 crianças após exercício em bicicleta (p OBJECTIVE: To compare airway responsiveness to methacholine, cycle ergometer exercise and free running in children with intermittent asthma. METHODS: A randomized study was conducted with 30 children of both genders with intermittent asthma. Each child was submitted to challenge testing on three separate days, in random order: a Methacholine challenge using a dosimeter; b Exercise challenge testing - free running along a 50-meter-long corridor; c Dry-air exercise challenge on a cycle ergometer. Target heart rate during exercise was 80 to 90% of the maximum predicted value. Spirometry was performed 3, 6,10,15,20 and 30 minutes after exercise. Exercise

  16. Gradient flow running coupling in SU(2) Nf=6 flavors

    CERN Document Server

    Leino, Viljami; Rummukainen, Kari; Suorsa, Joni M; Tuominen, Kimmo; Tähtinen, Sara

    2016-01-01

    We present preliminary results of the running of the coupling in SU(2) gauge theory with 6 massless fundamental representation fermion flavors. We measure the coupling using the gradient flow method with Schr\\"odinger functional boundary conditions. The results are consistent with the perturbation theory in the weak coupling and we see an indication of an infrared fixed point at strong coupling.

  17. Ubuntu Up and Running

    CERN Document Server

    Nixon, Robin

    2010-01-01

    Ubuntu for everyone! This popular Linux-based operating system is perfect for people with little technical background. It's simple to install, and easy to use -- with a strong focus on security. Ubuntu: Up and Running shows you the ins and outs of this system with a complete hands-on tour. You'll learn how Ubuntu works, how to quickly configure and maintain Ubuntu 10.04, and how to use this unique operating system for networking, business, and home entertainment. This book includes a DVD with the complete Ubuntu system and several specialized editions -- including the Mythbuntu multimedia re

  18. The physiology of deep-water running.

    Science.gov (United States)

    Reilly, Thomas; Dowzer, Clare N; Cable, N T

    2003-12-01

    Deep-water running is performed in the deep end of a swimming pool, normally with the aid of a flotation vest. The method is used for purposes of preventing injury and promoting recovery from strenuous exercise and as a form of supplementary training for cardiovascular fitness. Both stroke volume and cardiac output increase during water immersion: an increase in blood volume largely offsets the cardiac decelerating reflex at rest. At submaximal exercise intensities, blood lactate responses to exercise during deep-water running are elevated in comparison to treadmill running at a given oxygen uptake (VO2). While VO2, minute ventilation and heart rate are decreased under maximal exercise conditions in the water, deep-water running nevertheless can be justified as providing an adequate stimulus for cardiovascular training. Responses to training programmes have confirmed the efficacy of deep-water running, although positive responses are most evident when measured in a water-based test. Aerobic performance is maintained with deep-water running for up to 6 weeks in trained endurance athletes; sedentary individuals benefit more than athletes in improving maximal oxygen uptake. There is some limited evidence of improvement in anaerobic measures and in upper body strength in individuals engaging in deep-water running. A reduction in spinal loading constitutes a role for deep-water running in the prevention of injury, while an alleviation of muscle soreness confirms its value in recovery training. Further research into the applications of deep-water running to exercise therapy and athletes' training is recommended.

  19. ATLAS people can run!

    CERN Multimedia

    Claudia Marcelloni de Oliveira; Pauline Gagnon

    It must be all the training we are getting every day, running around trying to get everything ready for the start of the LHC next year. This year, the ATLAS runners were in fine form and came in force. Nine ATLAS teams signed up for the 37th Annual CERN Relay Race with six runners per team. Under a blasting sun on Wednesday 23rd May 2007, each team covered the distances of 1000m, 800m, 800m, 500m, 500m and 300m taking the runners around the whole Meyrin site, hills included. A small reception took place in the ATLAS secretariat a week later to award the ATLAS Cup to the best ATLAS team. For the details on this complex calculation which takes into account the age of each runner, their gender and the color of their shoes, see the July 2006 issue of ATLAS e-news. The ATLAS Running Athena Team, the only all-women team enrolled this year, won the much coveted ATLAS Cup for the second year in a row. In fact, they are so good that Peter Schmid and Patrick Fassnacht are wondering about reducing the women's bonus in...

  20. Development of a Bunch Frequency Monitor for the Preliminary Phase of the CLIC Test Facility CTF3

    CERN Document Server

    Caspers, Friedhelm; Ferrari, A; Rinolfi, Louis; Royer, P; Rydberg, A; Tecker, F A

    2003-01-01

    In the framework of the CLIC RF power source studies, the feasibility of the electron bunch train combination by injection with RF deflectors into an isochronous ring has been successfully demonstrated in the preliminary phase of CTF3. A new method, based on beam frequency spectrum analysis, was experimented to monitor this scheme. A coaxial pick-up and its read-out electronics were designed and mounted in the CTF3 ring to allow comparison of the amplitudes of five harmonics of the fundamental beam frequency (3 GHz) while combining the bunch trains. The commissioning of the monitor was a successful proof of principle for this new method, despite the short length of the bunch trains and the presence of parasitic signals associated to high-order waveguide modes propagating with the beam inside the pipe.

  1. The PS locomotive runs again

    CERN Multimedia

    2001-01-01

    Over forty years ago, the PS train entered service to steer the magnets of the accelerator into place... ... a service that was resumed last Tuesday. Left to right: Raymond Brown (CERN), Claude Tholomier (D.B.S.), Marcel Genolin (CERN), Gérard Saumade (D.B.S.), Ingo Ruehl (CERN), Olivier Carlier (D.B.S.), Patrick Poisot (D.B.S.), Christian Recour (D.B.S.). It is more than ten years since people at CERN heard the rumbling of the old PS train's steel wheels. Last Tuesday, the locomotive came back into service to be tested. It is nothing like the monstrous steel engines still running on conventional railways -just a small electric battery-driven vehicle employed on installing the magnets for the PS accelerator more than 40 years ago. To do so, it used the tracks that run round the accelerator. In fact, it is the grandfather of the LEP monorail. After PS was commissioned in 1959, the little train was used more and more rarely. This is because magnets never break down, or hardly ever! In fact, the loc...

  2. A preliminary analysis of the data from an in vitro inflation-extension test can validate the assumption of arterial tissue elasticity.

    Science.gov (United States)

    Rachev, Alexander; Shazly, Tarek

    2013-08-01

    The objective of this study is to propose a method for preliminary processing of the experimental data from an inflation-extension test on tubular arterial specimens. The method is based on the condition for existence of a strain energy function (SEF) and can be used to verify whether the data from a certain experiment validate the assumption that the tissue can be considered as an elastic solid. As an illustrative example of the proposed method, experimental data for a porcine renal artery are used and the sources of the error in satisfying the condition of elasticity are analyzed. The results lead to the conclusion that the experimental data for a renal artery validate that the artery exhibits an elastic mechanical response and a constitutive formulation based on the existence of the SEF is justified. A modification of the proposed method for the case of an in-plane biaxial stretching test of mechanically isotropic and orthotropic tissues is considered.

  3. Durability and Reliability of Electric Vehicle Batteries under Electric Utility Grid Operations. Part 1: Cell-to-Cell Variations and Preliminary Testing

    Directory of Open Access Journals (Sweden)

    Arnaud Devie

    2016-09-01

    Full Text Available Vehicle-to-grid (V2G and grid-to-vehicle (G2V strategies are considered to help stabilize the electric grid but their true impact on battery degradation is still unknown. The intention of this study is to test the impact of such strategies on the degradation of commercial Li-ion batteries. This first part looks into the preliminary testing performed prior to the start of degradation studies to ensure that the selected cells are compatible. Both the thermodynamic and kinetic cell-to-cell variation within the selected batch and the diagnostic-ability of the cells were investigated. The cells were found to have low cell-to-cell variations and are thus consistent. Moreover, the emulation of the full cell from the half-cell data prepared from harvested electrodes was successful and the degradation forecast showed that the main degradation modes can be differentiated.

  4. Run-off-road crashes.

    NARCIS (Netherlands)

    2014-01-01

    In the Netherlands, one-third of all fatalities and one-sixth of all seriously injured are the consequence of run-off-road crashes. The outcome of run-off-road crashes is relatively severe, one fatality in five seriously injured, which is twice the average in the Netherlands. Serious run-off-road cr

  5. Barefoot running: biomechanics and implications for running injuries.

    Science.gov (United States)

    Altman, Allison R; Davis, Irene S

    2012-01-01

    Despite the technological developments in modern running footwear, up to 79% of runners today get injured in a given year. As we evolved barefoot, examining this mode of running is insightful. Barefoot running encourages a forefoot strike pattern that is associated with a reduction in impact loading and stride length. Studies have shown a reduction in injuries to shod forefoot strikers as compared with rearfoot strikers. In addition to a forefoot strike pattern, barefoot running also affords the runner increased sensory feedback from the foot-ground contact, as well as increased energy storage in the arch. Minimal footwear is being used to mimic barefoot running, but it is not clear whether it truly does. The purpose of this article is to review current and past research on shod and barefoot/minimal footwear running and their implications for running injuries. Clearly more research is needed, and areas for future study are suggested.

  6. Pediatric running injuries.

    Science.gov (United States)

    Seto, Craig K; Statuta, Siobhan M; Solari, Ian L

    2010-07-01

    As more children have become involved in athletic activities and running, there has been a significant increase in overuse injuries. The young athlete with open growth plates is vulnerable to unique overuse injuries involving the apophyses, articular cartilage, and growth plate. The physician caring for these young athletes needs to be aware of these conditions to diagnose and treat them appropriately. Physicians should also be aware of the risk of overtraining and overuse injury in athletes participating in year-round sports and competition. Current guidelines for overuse injury prevention in young athletes are primarily based on consensus and expert opinion. Further research is needed to provide evidence-based guidelines for overuse injury prevention in young athletes and runners. Copyright 2010 Elsevier Inc. All rights reserved.

  7. ctypes. ctypes run!

    Directory of Open Access Journals (Sweden)

    2008-06-01

    Full Text Available

    One of the new features of Python 2.5 is the introduction of ctypes as a standard library module. At the simplest level, ctypes adds the standard C types to Python: signed and unsigned bytes, shorts, ints and longs; as well as structs, unions, pointers and functions. At run-time it can load a shared library (DLL and import its symbols, allowing a Python application to make function calls into the library without any special preparation.  ctypes can be used to wrap native libraries in place of interface generators such as SWIG, to manipulate memory and Python objects at the lowest level, and to prototype application development in other languages.

    This paper begins with a quick introduction to ctypes, shows some advanced techniques, and describes some examples of how it has been used by the author in his recent work.

  8. A preliminary validity study of the cambridge neuropsychological test automated battery for the assessment of executive function in schizophrenia and bipolar disorder.

    Science.gov (United States)

    Kim, Hee Sun; An, Yong Min; Kwon, Jun Soo; Shin, Min-Sup

    2014-10-01

    Although the executive function subtests of the Cambridge Neuropsychological Test Automated Battery (CANTAB) have been used to assess cognitive function in diverse psychiatric illnesses, few studies have verified the validity of this battery for Korean psychiatric patients. Therefore, this preliminary study evaluated the construct and concurrent validity of the executive function subtests of the CANTAB for Korean psychiatric patients by comparing it with subtests of the Computerized Neuropsychological Test (CNT). Three subtests of the CANTAB and three subtests of the CNT were administered to 36 patients diagnosed with either schizophrenia or bipolar disorder. Subtests of the CANTAB included the Intra/Extra-Dimensional Set Shift (IED), Stockings of Cambridge (SOC), and Spatial Working Memory (SWM). Differences between groups on each subtest as well as correlations between the subtests of the CANTAB and the CNT were assessed. The schizophrenia group performed significantly more poorly on the IED and the Wisconsin Card Sorting Test (WCST) compared with the bipolar disorder group. Additionally, correlation analyses revealed a significant correlation between the IED and the WCST; a positive correlation between the SOC and the Trail Making Test, Part B and the Stroop test; and a significant correlation between the SWM and the Stroop test. This study verified the construct and concurrent validity of the executive function subtests of the CANTAB for Korean psychiatric patients and suggests that the subtests of this battery would be useful and appropriate for assessing deficits in executive function in Korean clinical settings.

  9. [N.B.T. - PABA screening test for exocrine pancreatic function in healthy children. Preliminary investigation in 60 normal children].

    Science.gov (United States)

    Della Morte, M A; Losi, S; Morelli, P; Ripa, C; Sala, M R; Cereda, M; Mancosu, M; Saputo, V

    1982-01-01

    The theoretical bases of PABA test as a diagnostic screening test of exocrine pancreatic insufficiency, its mode of execution and the findings obtained in 60 healthy subjects ranging in age from 2 to 14 years are reported. Those conditions related to extra-pancreatic disorders or to other factors that may interfere with the test and reduce its reliability are also discussed.

  10. Oxygen delivery does not limit peak running speed during incremental downhill running to exhaustion.

    Science.gov (United States)

    Liefeldt, G; Noakes, T D; Dennis, S C

    1992-01-01

    Oxygen consumption (VO2), ventilation (VI), respiratory exchange ratio (R), stride frequency and blood lactate concentrations were measured continuously in nine trained athletes during two continuous incremental treadmill runs to exhaustion on gradients of either 0 degree or -3 degrees. Compared to the run at 0 degree gradient, the athletes reached significantly higher maximal treadmill velocities but significantly lower VO2, VI, R and peak blood lactate concentrations (P less than 0.001) during downhill running. These lower VO2 and blood lactate concentrations at exhaustion indicated that factors other than oxygen delivery limited maximal performance during the downhill run. In contrast, stride frequencies were similar at each treadmill velocity; the higher maximal speed during the downhill run was achieved with a significantly longer stride length (P less than 0.001); maximal stride frequency was the same between tests. Equivalent maximal stride frequencies suggested that factors determining the rate of lower limb stride recovery may have limited maximal running speed during downhill running and, possibly, also during horizontal running.

  11. Sex differences in running mechanics and patellofemoral joint kinetics following an exhaustive run.

    Science.gov (United States)

    Willson, John D; Loss, Justin R; Willy, Richard W; Meardon, Stacey A

    2015-11-26

    Patellofemoral joint pain (PFP) is a common running-related injury that is more prevalent in females and thought to be associated with altered running mechanics. Changes in running mechanics have been observed following an exhaustive run but have not been analyzed relative to the sex bias for PFP. The purpose of this study was to test if females demonstrate unique changes in running mechanics associated with PFP following an exhaustive run. For this study, 18 females and 17 males ran to volitional exhaustion. Peak PFJ contact force and stress, PFJ contact force and stress loading rates, hip adduction excursion, and hip and knee joint frontal plane angular impulse were analyzed between females and males using separate 2 factor ANOVAs (2 (male/female)×2 (before/after exhaustion)). We observed similar changes in running mechanics among males and females over the course of the exhaustive run. Specifically, greater peak PFJ contact force loading rate (5%, P=.01), PFJ stress loading rate (5%, Pmechanics due to exhaustion do not appear to contribute to the sex bias for PFP.

  12. Design of a Control System for the Running-in Test Bench of AC-DC Wheel Set Motor%交直流轮对电机跑合试验台控制系统设计

    Institute of Scientific and Technical Information of China (English)

    张春红

    2014-01-01

    After assembly of the wheel set motor,it is required to make running-in test on the wheel set in order to check whether the gear box, motor bearings and wheel set bearings conform to the installation requirement.Three control systems are designed,namely data collection,AC-DC drive and intelligence test and control.In the design of the data collecting system,sensors are used to collect signals about ,temperature and rotation speed during motor running-in.The AC-DC drive is designed to meet the requirement of the drive of the AC-DC haulage motor.The intelligent control design adopts ADVANTECH industrial computer as control terminal,and MCGS configuration software and communication equipment 485 are used to perform the function of automatic collection of experimental data.The test device,with manual and automatic functions has high control precision and other advantages.%轮对电机组装完成之后,为了检查齿轮箱、电机轴承、轮对轴承等是否符合安装要求,需要对轮对进行跑合试验。从数据采集、交直流传动和智能测控这三个控制系统进行设计。数据采集系统设计采用传感器采集电机跑合过程中的振动、温度、转速等信号。交直流传动设计是为了满足交直流机车电机传动的需求。智能测控设计采用研华工控机作为控制终端,用MC GS组态软件和485通讯实现试验过程数据自动采集等功能。试验装置具备手动和自动两种功能,具有控制精度高等优点。

  13. Stability Criterion for Humanoid Running

    Institute of Scientific and Technical Information of China (English)

    LIZhao-Hui; HUANGQiang; LIKe-Jie

    2005-01-01

    A humanoid robot has high mobility but possibly risks of tipping over. Until now, one main topic on humanoid robots is to study the walking stability; the issue of the running stability has rarely been investigated. The running is different from the walking, and is more difficult to maintain its dynamic stability. The objective of this paper is to study the stability criterion for humanoid running based on the whole dynamics. First, the cycle and the dynamics of running are analyzed. Then, the stability criterion of humanoid running is presented. Finally, the effectiveness of the proposed stability criterion is illustrated by a dynamic simulation example using a dynamic analysis and design system (DADS).

  14. Polarization Issues in Run 2008

    Energy Technology Data Exchange (ETDEWEB)

    Zhang,S.Y.; Ahrens, L.; Huang, H.; Zeno, K.

    2008-07-01

    The RHIC proton beam polarization has a strong dependence on intensity in Run 2008, whereas the dependence is almost absent in Run 2006. Meanwhile, the RHIC beam transverse emittance also has a dependence on intensity in Run 2008, but little in Run 2006. Using the emittance measurement at the AGS IPM and the BtA multiwires, the source of this difference between 2006 and 2008 runs is traced to the Booster. It is found that at least the degree of the vertical scraping in the Booster is different in 2006 and 2008. The effect of this scraping for the RHIC beam emittance and polarization is studied.

  15. Development of an Evaluation System for Vertical Vibration of Railway Vehicles with Field-Portable Actuators (1st Report, Data Processing Method to Estimate Running-Vehicle Vibration from Stationary Vibration Test)

    Science.gov (United States)

    Tomioka, Takahiro; Takigami, Tadao

    The authors are developing a vibration evaluation system, which consists of field-portable exciters (actuators) and data processing software, to estimate vertical vibration and ride quality of railway vehicles. One of the main characteristics of the system is that the acceleration power spectral density (PSD) at arbitrary point on the carbody in running condition is synthesized numerically from measured data obtained when each axle box or each wheelset is excited individually using limited number of actuators. This paper focuses upon the data processing method for the vibration evaluation system. A series of excitation tests for a commuter vehicle is carried out to confirm the basic concept to estimate the PSD by using the rolling stock testing plant at Railway Technical Research Institute. Some excitation methodologies and data processing formulae are compared among each other. It is clearly shown that the estimated PSDs well agree with actual PSD. It is found out that the estimation gives high accurate results when only excited axle box acceleration are used in estimation analysis.

  16. Thermal Conductivity Measurements By Means of a New `Small Hot-Box' Apparatus: Manufacturing, Calibration and Preliminary Experimental Tests on Different Materials

    Science.gov (United States)

    Buratti, C.; Belloni, E.; Lunghi, L.; Barbanera, M.

    2016-05-01

    The evaluation of the thermal performance building components requires a high level of accuracy. Windows, doors and thermal bridges are not homogeneous, and their thermal transmittance can be evaluated by means of Hot-Box, used for full-scale elements. For homogeneous materials and one-dimensional heat flux, the thermal conductivity can be easily measured through other experimental apparatuses, such as the guarded hot plate and the heat flow meters. This study presents a new experimental apparatus named Small Hot-Box, built at the University of Perugia. No European standards are available for this innovative facility, but it takes into account some prescriptions of EN ISO 8990 and EN ISO 12567; it was built for the evaluation of the thermal properties of small specimens. The apparatus was designed, built, and calibrated by means of preliminary measurements. It is composed of a hot and a cold side, and the external walls are made of thick insulation. The thermal conductivity can be calculated by two different methodologies: the Hot-Box and the thermal flux meter method. Preliminary calibrations were carried out and different materials with known thermal transmittance were tested. The aim is the development of a new experimental apparatus; guidance documents could be defined for the measurements methodology requirements.

  17. Antimicrobial susceptibility determined by the E test, Löwenstein-Jensen proportion, and DNA sequencing methods among Mycobacterium tuberculosis isolates discrepancies, preliminary results

    Directory of Open Access Journals (Sweden)

    Maria Inês Moura Freixo

    2004-02-01

    Full Text Available Mycobacterium tuberculosis strains resistant to streptomycin (SM, isoniazid (INH, and/or rifampin (RIF as determined by the conventional Löwenstein-Jensen proportion method (LJPM were compared with the E test, a minimum inhibitory concentration susceptibility method. Discrepant isolates were further evaluated by BACTEC and by DNA sequence analyses for mutations in genes most often associated with resistance to these drugs (rpsL, katG, inhA, and rpoB. Preliminary discordant E test results were seen in 75% of isolates resistant to SM and in 11% to INH. Discordance improved for these two drugs (63% for SM and none for INH when isolates were re-tested but worsened for RIF (30%. Despite good agreement between phenotypic results and sequencing analyses, wild type profiles were detected on resistant strains mainly for SM and INH. It should be aware that susceptible isolates according to molecular methods might contain other mechanisms of resistance. Although reproducibility of the LJPM susceptibility method has been established, variable E test results for some M. tuberculosis isolates poses questions regarding its reproducibility particularly the impact of E test performance which may vary among laboratories despite adherence to recommended protocols. Further studies must be done to enlarge the evaluated samples and looked possible mutations outside of the hot spot sequenced gene among discrepant strains.

  18. Preliminary Results of the Echo-Seeding Experiment ECHO-7 at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, D.; Colby, E.; Ding, Y.; Dunning, M.; Frederico, J.; Gilevich, S.; Hast, C.; Jobe, K.; McCormick, D.; Nelson, J.; Raubenheimer, T.O.; Soong, K.; Stupakov, G.; Szalata, Z.; Walz, D.; Weathersby, S.; Woodley, M.; /SLAC; Corlett, J.; Qiang, J.; Penn, G.; Prestemon, S.; /LBL, Berkeley /LPHE, Lausanne

    2010-06-15

    ECHO-7 is a proof-of-principle echo-enabled harmonic generation FEL experiment in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The experiment aims to generate coherent radiation at 318 nm and 227 nm, which are the 5th and 7th harmonic of the infrared seed laser. In this paper we present the preliminary results from the commissioning run of the completed experimental setup which started in April 2010.

  19. Point-of-Care Testing in Bathhouses: A Narrative Inquiry into the Experience of Receiving a Positive Preliminary HIV Test Result.

    Science.gov (United States)

    Genoway, Shyla; Caine, Vera; Singh, Ameeta E; Estefan, Andrew

    2016-01-01

    With a call to increase the accessibility of HIV testing, point-of-care testing for HIV is being readily adopted, but little attention has been paid to the experiences of people being tested at HIV point-of-care sites. Some testing environments, such as bathhouses, promote testing for HIV in higher-risk groups. In this narrative inquiry study we explored the experiences of people testing positive for HIV through point-of-care while at a bathhouse. Three narrative threads for reconsidering the practice were identified: (a) seeing complexities, understanding testing decisions in relation to time, place, and social context; (b) recognizing the impact and significance of secret and silent stories; and (c) tentative and tension-filled connections to care. It is important to understand testing experiences across time, place, and in diverse social contexts. These experiences are embedded within the larger life histories of people and raise questions about adequate support, follow-up, and counseling.

  20. Physiological assessment of isolated running does not directly replicate running capacity after triathlon-specific cycling.

    Science.gov (United States)

    Etxebarria, Naroa; Hunt, Julie; Ingham, Steve; Ferguson, Richard

    2014-01-01

    Triathlon running is affected by prior cycling and power output during triathlon cycling is variable in nature. We compared constant and triathlon-specific variable power cycling and their effect on subsequent submaximal running physiology. Nine well-trained male triathletes (age 24.6 ± 4.6 years, [Formula: see text] 4.5 ± 0.4 L · min(-1); mean ± SD) performed a submaximal incremental run test, under three conditions: no prior exercise and after a 1 h cycling trial at 65% of maximal aerobic power with either a constant or a variable power profile. The variable power protocol involved multiple 10-90 s intermittent efforts at 40-140% maximal aerobic power. During cycling, pulmonary ventilation (22%, ± 14%; mean; ± 90% confidence limits), blood lactate (179%, ± 48%) and rating of perceived exertion (7.3%, ± 10.2%) were all substantially higher during variable than during constant power cycling. At the start of the run, blood lactate was 64%, ± 61% higher after variable compared to constant power cycling, which decreased running velocity at 4 mM lactate threshold by 0.6, ± 0.9 km · h(-1). Physiological responses to incremental running are negatively affected by prior cycling and, to a greater extent, by variable compared to even-paced cycling. Testing and training of triathletes should account foe higher physiological cost of triathlon-specific cycling and its effect on subsequent running.

  1. Preliminary identification of potentially disruptive scenarios at the Greater Confinement Disposal Facility, Area 5 of the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Guzowski, R.V. [Science Applications International Corp., Albuquerque, NM (United States); Newman, G. [GRAM, Inc., Albuquerque, NM (United States)

    1993-12-01

    The Greater Confinement Disposal location is being evaluated to determine whether defense-generated transuranic waste buried at this location complies with the Containment Requirements established by the US Environmental Protection Agency. One step in determining compliance is to identify those combinations of events and processes (scenarios) that define possible future states of the disposal system for which performance assessments must be performed. An established scenario-development procedure was used to identify a comprehensive set of mutually exclusive scenarios. To assure completeness, 761 features, events, processes, and other listings (FEPS) were compiled from 11 references. This number was reduced to 205 primarily through the elimination of duplications. The 205 FEPs were screened based on site-specific, goal-specific, and regulatory criteria. Four events survived screening and were used in preliminary scenario development: (1) exploratory drilling penetrates a GCD borehole, (2) drilling of a withdrawal/injection well penetrates a GCD borehole, (3) subsidence occurs at the RWMS, and (4) irrigation occurs at the RWMS. A logic diagram was used to develop 16 scenarios from the four events. No screening of these scenarios was attempted at this time. Additional screening of the currently retained events and processes will be based on additional data and information from site-characterization activities. When screening of the events and processes is completed, a final set of scenarios will be developed and screened based on consequence and probability of occurrence.

  2. Design and test of an extremely high resolution Timing Counter for the MEG II experiment: preliminary results

    CERN Document Server

    De Gerone, M; Ootani, W; Uchiyama, Y; Nishimura, M; Shirabe, S; Cattaneo, P W; Rossella, M

    2013-01-01

    The design and tests of Timing Counter elements for the upgrade of the MEG experiment, MEG II,is presented. The detector is based on several small plates of scintillator with a Silicon PhotoMultipliers dual-side readout. The optimisation of the single counter elements (SiPMs, scintillators, geometry) is described. Moreover, the results obtained with a first prototype tested at the Beam Test Facility (BTF) of the INFN Laboratori Nazionali di Frascati (LNF) are presented.

  3. Use of LARA-urea Breath Test in diagnosis of Helicobacter pylori Infection in Children and Adolescents: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Andrew S Day

    2003-01-01

    Full Text Available BACKGROUND: An accurate diagnosis of Helicobacter pylori infection in children currently relies upon histological assessment or culture of gastric biopsies obtained at endoscopy. Noninvasive testing would permit simpler assessment of children with dyspeptic symptoms. The primary aim of the present study was to prospectively evaluate a novel urea breath testing method in children undergoing diagnostic assessment of dyspeptic symptoms and secondarily to consider the roles of other noninvasive tests in these children.

  4. Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor/System-on-a-Chip

    Science.gov (United States)

    Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

    2015-01-01

    Hardness assurance test results of Intel state-of-the-art 14nm “Broadwell” U-series processor / System-on-a-Chip (SoC) for total ionizing dose (TID) are presented, along with exploratory results from trials at a medical proton facility. Test method builds upon previous efforts [1] by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

  5. Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor - System-on-a-Chip

    Science.gov (United States)

    Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

    2015-01-01

    Hardness assurance test results of Intel state-of-the-art 14nm Broadwell U-series processor System-on-a-Chip (SoC) for total dose are presented, along with first-look exploratory results from trials at a medical proton facility. Test method builds upon previous efforts by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

  6. The QCD Running Coupling

    CERN Document Server

    Deur, A; de Teramond, G F

    2016-01-01

    We review the present knowledge for $\\alpha_s$, the fundamental coupling underlying the interactions of quarks and gluons in QCD. The dependence of $\\alpha_s(Q^2)$ on momentum transfer $Q$ encodes the underlying dynamics of hadron physics -from color confinement in the infrared domain to asymptotic freedom at short distances. We review constraints on $\\alpha_s(Q^2)$ at high $Q^2$, as predicted by perturbative QCD, and its analytic behavior at small $Q^2$, based on models of nonperturbative dynamics. In the introductory part of this review, we explain the phenomenological meaning of $\\alpha_s$, the reason for its running, and the challenges facing a complete understanding of its analytic behavior in the infrared domain. In the second, more technical, part of the review, we discuss the behavior of $\\alpha_s(Q^2)$ in the high $Q^2$ domain of QCD. We review how $\\alpha_s$ is defined, including its renormalization scheme dependence, the definition of its renormalization scale, the utility of effective charges, as ...

  7. Periodic sound-based 6-minute walk test forpatients with Duchenne muscular dystrophy:a preliminary study

    Science.gov (United States)

    Nishizawa, Hitomi; Genno, Hirokazu; Shiba, Naoko; Nakamura, Akinori

    2015-01-01

    [Purpose] The purpose of this study was to verify if a periodic sound-based 6-minute walk test with the best periodic sound could be used to evaluate physical endurance more precisely than the conventional 6-minute walk test. [Subjects] The subjects were healthy subjects and 6 ambulant patients with Duchenne muscular dystrophy. [Methods] The subjects initially walked for 1 minute to a long-interval metronome sound, and the walking distance was measured. The sound interval was then gradually shortened, and the subjects walked for 1 minute for each of the intervals. The best periodic sound was considered to be the periodic sound used when the subject walked the longest distance in 1 minute, and the process of determining it was referred to as the period shortening walk test. This study administered the 6-minute walk test with the best periodic sound to twenty healthy subjects and 6 ambulant patients with Duchenne muscular dystrophy and compared the walking distance. [Results] The periodic sound-based 6-minute walk test distances in both the healthy subjects and the patients were significantly longer than the conventional 6-minute walk test distances. [Conclusion] The periodic sound-based 6-minute walk test provided a better indication of ambulatory potential in an evaluation of physical endurance than the conventional 6-minute walk test. PMID:26696721

  8. How Are Spoken Skills Assessed in Proficiency Tests of General English as a Foreign Language? A Preliminary Survey

    Science.gov (United States)

    Roca-Varela, Mª Luisa; Palacios, Ignacio M.

    2013-01-01

    This paper examines some of the best known proficiency tests in English, with particular focus on the oral component. Attention is paid to the following issues, among others: the weighting of oral elements in testing, the criteria used for the assessment of oral skills and the relation of these to the general guidelines in the "Common…

  9. Reliability and Factorial Validity of Non-Specific and Tennis-Specific Pre-Planned Agility Tests; Preliminary Analysis

    Science.gov (United States)

    Sekulic, Damir; Uljevic, Ognjen; Peric, Mia; Spasic, Miodrag; Kondric, Miran

    2017-01-01

    Abstract Agility is an important quality in tennis, yet there is an evident lack of studies focussing on the applicability of tennis-specific agility performances and comparing them to equivalent non-specific agility performances. The aim of this study was to evaluate the reliability and factorial validity of three tests of pre-planned agility, performed in specific (with a tennis racquet) and non-specific (without a tennis racquet) conditions. The sample consisted of 33 tennis players (13 males and 20 females; age: 18.3 ± 1.1 years and 18.6 ± 1.3 years; body height: 185.4 ± 51 cm and 169.3 ± 4.2 cm, 74.0 ± 4.4 kg and 61.2 ± 3.1 kg, respectively). The variables comprised three agility tests: a 20-yard test, a T-test and the Illinois test, all performed in both specific and non-specific conditions. Between-subject and within-subject reliability were found to be high (Cronbach Alpha: 0.93 to 0.98; Coefficient of Variation: 3 to 8%), with better within-subject reliability and stability of the measurement for specific tests. Pearson’s product moment correlations between the non-specific and specific agility performances were high (r ≥0.84), while factor analysis extracted only one significant latent dimension on the basis of the Guttman-Kaiser criterion. The results of the 20-yard test were better when the test was conducted in the specific conditions (t-test = 2.66; p test, superior results were recorded in the non-specific conditions (t-test = 2.96; p test duration (about 20 s) and non-specific locomotion forms such as rotational movements. Considering the findings of the present study, when testing tennis-specific pre-planned agility, we suggest using tests of short duration (less than 10 s) and sport-specific types of locomotion. PMID:28210343

  10. Mean platelet volume (MPV predicts middle distance running performance.

    Directory of Open Access Journals (Sweden)

    Giuseppe Lippi

    Full Text Available Running economy and performance in middle distance running depend on several physiological factors, which include anthropometric variables, functional characteristics, training volume and intensity. Since little information is available about hematological predictors of middle distance running time, we investigated whether some hematological parameters may be associated with middle distance running performance in a large sample of recreational runners.The study population consisted in 43 amateur runners (15 females, 28 males; median age 47 years, who successfully concluded a 21.1 km half-marathon at 75-85% of their maximal aerobic power (VO2max. Whole blood was collected 10 min before the run started and immediately thereafter, and hematological testing was completed within 2 hours after sample collection.The values of lymphocytes and eosinophils exhibited a significant decrease compared to pre-run values, whereas those of mean corpuscular volume (MCV, platelets, mean platelet volume (MPV, white blood cells (WBCs, neutrophils and monocytes were significantly increased after the run. In univariate analysis, significant associations with running time were found for pre-run values of hematocrit, hemoglobin, mean corpuscular hemoglobin (MCH, red blood cell distribution width (RDW, MPV, reticulocyte hemoglobin concentration (RetCHR, and post-run values of MCH, RDW, MPV, monocytes and RetCHR. In multivariate analysis, in which running time was entered as dependent variable whereas age, sex, blood lactate, body mass index, VO2max, mean training regimen and the hematological parameters significantly associated with running performance in univariate analysis were entered as independent variables, only MPV values before and after the trial remained significantly associated with running time. After adjustment for platelet count, the MPV value before the run (p = 0.042, but not thereafter (p = 0.247, remained significantly associated with running

  11. The gradient flow running coupling in SU2 with 8 flavors

    DEFF Research Database (Denmark)

    Rantaharju, Jarno; Karavirta, Tuomas; Leino, Viljami

    2014-01-01

    We present preliminary results of the gradient flow running coupling with Dirichlet boundary condition in the SU(2) gauge theory with 8 fermion flavours. Improvements to the gradient flow measurement allow us to obtain a robust continuum limit. The results are consistent with perturbative running...

  12. Preliminary test results of a new high-energy-resolution silicon and CdZnTe pixel detectors for application to x-ray astronomy

    Science.gov (United States)

    Sushkov, V. V.; Hamilton, William J.; Hurley, Kevin; Maeding, Dale G.; Ogelman, Hakki; Paulos, Robert J.; Puetter, Richard C.; Tumer, Tumay O.; Zweerink, Jeffrey

    1999-10-01

    New, high spatial resolution CdZnTe (CZT) and silicon (Si) pixel detectors are highly suitable for x-ray astronomy. These detectors are planned for use in wide field of view, imaging x-ray, and low energy gamma-ray all-sky monitor (AXGAM) in a future space mission. The high stopping power of CZT detectors combined with low-noise front-end readout makes possible an order of magnitude improvement in spatial and energy resolution in x-ray detection. The AXGAM instrument will be built in the form of a fine coded aperture placed over two-dimensional, high spatial resolution and low energy threshold CZT pixel detector array. The preliminary result of CZT and silicon pixel detector test with low-noise readout electronics system are presented. These detectors may also be used with or without modification for medical and industrial imaging.

  13. The Verbal Clock Test: preliminary validation of a brief, vision- and motor-free measure of executive function in a clinical sample.

    Science.gov (United States)

    Cercy, Steven P

    2012-01-01

    Assessment of executive functions is frequently time-consuming, and although some brief measures exist they are subject to problems associated with limited education, culture of origin, impairments of motor or visual systems, and tolerability. Preliminary validation of a newly developed measure, the Verbal Clock Test (VCT), was conducted in a clinical sample of 294 patients who underwent neuropsychological evaluation. The evidence supports the interpretation of VCT scores as demonstrating construct validity, criterion-related validity, and sound internal consistency. Performance does not vary substantially with gender or mood, and variability associated with age, education, and ethnicity is modest. Confounding effects of motor and visual impairments are eliminated. Initial data suggest the VCT represents a reasonable method of assessing abstract reasoning and concept formation when clinical circumstances limit the use of currently available measures.

  14. Preliminary reliability test of lateral-current-injection GaInAsP/InP membrane distributed feedback laser on Si substrate fabricated by adhesive wafer bonding

    Science.gov (United States)

    Fukuda, Kai; Inoue, Daisuke; Hiratani, Takuo; Amemiya, Tomohiro; Nishiyama, Nobuhiko; Arai, Shigehisa

    2017-02-01

    A preliminary reliability test was performed for lateral-current-injection GaInAsP/InP membrane Distributed Feedback (DFB) lasers fabricated by multi-regrowth and adhesive wafer bonding. The measurement was conducted for lasers with two different types of p-side electrode: Ti/Au and Au/Zn/Au. The device with the Au/Zn/Au electrode, which had better current-voltage (I-V) characteristics, showed no degradation of differential quantum efficiency and threshold current after continuous aging for 310 h at a bias current density of 5 kA/cm2. This result indicates that the multi-regrowth and bonding process for the GaInAsP/InP membrane DFB laser will not impact the initial reliability.

  15. Immediate conversion to CAS after neurological intolerance at cross-clamping test during CEA: a preliminary experience.

    Science.gov (United States)

    Guy Bianchi, P; Tolva, V; Dalainas, I; Bertoni, G; Cireni, L; Trimarchi, S; Rampoldi, V; Casana, R

    2012-02-01

    The aim of this preliminary study is to evaluate the feasibility and efficacy of CAS as treatment option to endarterectomy when carotid shunt cannot be used safely. The medical records concerning 469 carotid stenosis treated between January 2006 and December 2009 were retrospectively reviewed, focusing on cross-clamp intolerance during CEA. Patients with cross-clamping intolerance were divided in two groups. Group 1: those that concluded the open procedure with the use of a shunt, and Group 2: those who experience immediate brain intolerance and coma and were immediately converted to an endovascular procedure. Mortality and neurological adverse event rate were compared between shunted CEA and cross-clamping intolerant cases converted into CAS. The secondary end-point was long-term survival. Carotid cross-clamp intolerance occurred in 30 cases (8.7%). CEA with Pruitt-Inahara's shunt was performed in 17 cases with a perioperative neurological adverse event rate of 23.5%. In 13 cases limitations to shunting due to quick onset of coma and/or an unfavorable anatomy were encountered. In these 13 cases the open intervention was immediately converted into endovascular procedure. Technical success was achieved in all the converted to CAS cases (100%), with a perioperative neurological adverse event rate of 7.7% (P=0.35 between the two groups). No significant difference emerges comparing patient's survival between the cases Nevertheless, the small dimension of this survey, immediate conversion to CAS resulted feasible with a lower risk of neurological adverse events if compared to CEA with shunt, and could be considered as an alternative to CEA when carotid shunt cannot be used safely.

  16. Preliminary on the isotope hydrology investigations at the Nevada test site: Hydrologic resources management program; FY 1992--1993

    Energy Technology Data Exchange (ETDEWEB)

    Davisson, M.L.; Kenneally, J.M.; Smith, D.K.; Hudson, G.B.; Nimz, G.J.; Rego, J.H.

    1994-01-01

    A comprehensive isotope data base of the NTS groundwaters collected during FY 92-93 is presented with preliminary interpretations. Multiple samples were collected from over 30 sites on pumped wells and open-holes by wireline bailing. Field water level measurements indicate essentially a bimodal distribution separated by water levels at higher elevations (e.g. Pahute Mesa) from water levels of lower elevations (e.g. Yucca and Frenchman Flats). Down hole temperature measurements have confirmed anomalous temperature gradients in the eastern Yucca Flat area and on Pahute Mesa, where horizontal temperature gradients up to 0.33{degrees}F/100ft are found. Consistent with previous reports by others, the major ion geochemistry of the NTS groundwater are dominated by Na-K-HCO{sub 3} and Ca-Mg-HCO{sub 3} water types, where the Na-rich water appears to be related to dissolution in the volcanic tuffs and the Ca-rich water to the Paleozoic carbonates. Increases in dissolved Si also seems to be indicative of groundwater that resides in the volcanic tuffs. Processes controlling the Na/Ca ratios are complex and may include ion exchange reactions with clays, evaporative concentration in the vadose zone, and lithological heterogeneities in addition to simple differential dissolution between the volcanic tuffs and the Paleozoic carbonates. Apparent {sup 14}C ages range between 4000 and 38,000 years for groundwaters at the NTS. The uncertainty is large for exact age determinations at this time. The {sup 14}C abundance decreases with increased dissolved HCO{sub 3}, and {sup 13}C suggests dissolution of the ``dead`` Paleozoic carbonates significantly influence the ages, but more work is needed to investigate the influence of vadose zone carbonate.

  17. Preliminary geochemical and physical testing of materials for plugging of man-made accesses to a repository in basalt

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, C.L.; Anttonen, G.J.; O' Rourke, J.E.; Allirot, D.

    1980-04-01

    The available data on environmental conditions (both natural and man-made) at the Hanford Site are sufficient for preconceptual plug system design. Results of the geochemical testing program indicate that preferred candidate plug materials are chemically nonreactive during laboratory tests that simulated some of the expected environmental conditions. Agitated, crushed-basalt samples and mixtures containing basalt were found to be self-cementing under the hydrothermal conditions. Materials considered most suitable for consideration in future test programs and preconceptual plug design are mixtures of natural materials (basalt, clay, glaciofluvial sand, gravel, and zeolite) and processed natural materials (portland cement Type V and grouts plus additives).

  18. Thermal-Load Mechanic Running Test of Power Turbine%燃气轮机动力涡轮热负荷机械运转试验方法

    Institute of Scientific and Technical Information of China (English)

    张三多; 刘京春; 王兆丰

    2014-01-01

    阐述了利用工厂动力设备,在非专用试验车台上,进行兆瓦级大功率工业燃气轮机动力涡轮工厂检验性试车的方法。采用空气管路连接动力涡轮进气口与排气口,构成密闭闭环回路,利用电动机驱动动力涡轮运转,涡轮叶片搅动空气使其升温,实现了热态空负荷机械运转的试验状态,达到了在额定工作转速下进行机械磨合运转试验,和在一定温度下对动力涡轮进行热态检验试验的目的。本方法对其他型号动力涡轮试车具有重要参考价值。%A rig test method was illustrated for the power turbine of the high-power industrial gas turbine of MWs order on unspecialized test rig using plant power facility. An air line was used to connect the power turbine inlet with its outlet to construct a closed circuit loop, using electric motor to drive the power turbine, with the turbine blades stirring air to heat the air. In this way, a closed circuit cycle was constructed through air-line connection and the power turbine was driven by electric motor. The power turbine was given me-chanic grounding-in test at normal operation speed and thermal test verification by heating air , making a mechanic running test of thermal state and void load. The study is of great importance of reference for the test of other types of power turbines.

  19. The North Carolina State Testing Results. Preliminary State - Level Data Only. Multiple-Choice. Grade 3 Pretest. End-of-Grade (Grades 3-8); and End-of-Course Tests. Reporting on the State and 117 Public School Systems and 92 Charter Schools. "The Green Book."

    Science.gov (United States)

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of Accountability.

    This book contains data reported to the North Carolina Department of Public Instruction before August 12, 2002 about state testing results. It contains preliminary 2001-2002 state testing results for: (1) grade 3 pretest, in reading and mathematics; (2) end-of-grade tests at grades 3 through 8, multiple choice tests; (3) alternate assessment…

  20. Preliminary Report on Oak Ridge National Laboratory Testing of Drake/ACSS/MA2/E3X

    Energy Technology Data Exchange (ETDEWEB)

    Irminger, Philip [ORNL; Davis, Cody [General Cable Corporation; Temple, Bill [General Cable Corporation; Baker, Gord [General Cable Corporation; Starke, Michael R [ORNL

    2016-01-01

    A key to industry acceptance of a new technology is extensive validation in field trials. The Powerline Conductor Accelerated Test facility (PCAT) at Oak Ridge National Laboratory (ORNL) is specifically designed to evaluate the performance and reliability of a new conductor technology under real world conditions. The facility is set up to capture large amounts of data during testing. General Cable used the ORNL PCAT facility to validate the performance of TransPowr with E3X Technology a standard overhead conductor with an inorganic high emissivity, low absorptivity surface coating. Extensive testing has demonstrated a significant improvement in conductor performance across a wide range of operating temperatures, indicating that E3X Technology can provide a reduction in temperature, a reduction in sag, and an increase in ampacity when applied to the surface of any overhead conductor. This report provides initial results of that testing.

  1. Health Orientation, Knowledge, and Attitudes toward Genetic Testing and Personalized Genomic Services: Preliminary Data from an Italian Sample

    Directory of Open Access Journals (Sweden)

    Serena Oliveri

    2016-01-01

    Full Text Available Objective. The study aims at assessing personality tendencies and orientations that could be closely correlated with knowledge, awareness, and interest toward undergoing genetic testing. Methods. A sample of 145 subjects in Italy completed an online survey, investigating demographic data, health orientation, level of perceived knowledge about genetic risk, genetic screening, and personal attitudes toward direct to consumer genetic testing (DTCGT. Results. Results showed that respondents considered genetic assessment to be helpful for disease prevention, but they were concerned that results could affect their life planning with little clinical utility. Furthermore, a very high percentage of respondents (67% had never heard about genetic testing directly available to the public. Data showed that personality tendencies, such as personal health consciousness, health internal control, health esteem, and confidence, motivation to avoid unhealthiness and motivation for healthiness affected the uptake of genetic information and the interest in undergoing genetic testing. Conclusions. Public knowledge and attitudes toward genetic risk and genetic testing among European countries, along with individual personality and psychological tendencies that could affect these attitudes, remain unexplored. The present study constitutes one of the first attempts to investigate how such personality tendencies could motivation to undergo genetic testing and engagement in lifestyle changes.

  2. Health Orientation, Knowledge, and Attitudes toward Genetic Testing and Personalized Genomic Services: Preliminary Data from an Italian Sample

    Science.gov (United States)

    Arnaboldi, Paola; Cutica, Ilaria; Fioretti, Chiara

    2016-01-01

    Objective. The study aims at assessing personality tendencies and orientations that could be closely correlated with knowledge, awareness, and interest toward undergoing genetic testing. Methods. A sample of 145 subjects in Italy completed an online survey, investigating demographic data, health orientation, level of perceived knowledge about genetic risk, genetic screening, and personal attitudes toward direct to consumer genetic testing (DTCGT). Results. Results showed that respondents considered genetic assessment to be helpful for disease prevention, but they were concerned that results could affect their life planning with little clinical utility. Furthermore, a very high percentage of respondents (67%) had never heard about genetic testing directly available to the public. Data showed that personality tendencies, such as personal health consciousness, health internal control, health esteem, and confidence, motivation to avoid unhealthiness and motivation for healthiness affected the uptake of genetic information and the interest in undergoing genetic testing. Conclusions. Public knowledge and attitudes toward genetic risk and genetic testing among European countries, along with individual personality and psychological tendencies that could affect these attitudes, remain unexplored. The present study constitutes one of the first attempts to investigate how such personality tendencies could motivation to undergo genetic testing and engagement in lifestyle changes. PMID:28105428

  3. Assessing speech perception in Swedish school-aged children: preliminary data on the Listen-Say test.

    Science.gov (United States)

    Nakeva von Mentzer, Cecilia; Sundström, Martina; Enqvist, Karin; Hällgren, Mathias

    2017-10-10

    To meet the need for a linguistic speech perception test in Swedish, the 'Listen-Say test' was developed. Minimal word pairs were used as speech material to assess seven phonetic contrasts in two auditory backgrounds. In the present study, children's speech discrimination skills in quiet and in four-talker (4T) speech background were examined. Associations with lexical-access skills and academic achievement were explored. The study included 27 school children 7-9 years of age. Overall, the children discriminated phonetic contrasts well in both conditions (quiet: Mdn 95%; 4T speech; Mdn 91% correct). A significant effect of 4T speech background was evident in three of the contrasts, connected to place of articulation, voicing and syllable complexity. Reaction times for correctly identified target words were significantly longer in the quiet condition, possibly reflecting a need for further balancing of the test order. Overall speech discrimination accuracy was moderately to highly correlated with lexical-access ability. Children identified as having high concentration ability by their teacher had the highest speech discrimination scores in both conditions followed by children identified as having high reading ability. The first wave of data collection with the Listen-Say test indicates that the test appears to be sensitive to predicted perceptual difficulties of phonetic contrasts particularly in noise. The clinical benefit of using a procedure where speech discrimination, lexical-access ability and academic achievement are taken into account is discussed as well as issues for further test refinement.

  4. Training in ChiRunning to reduce blood pressure: a randomized controlled pilot study

    OpenAIRE

    Mcdermott, K.; Kumar, D.; Goldman, V.; Feng, H.; Mehling, W; Moskowitz, JT; Souza, RB; Hecht, FM

    2015-01-01

    © 2015 McDermott et al. Background: People with prehypertension (120-130/80-90 mmHg) are at increased risk of progressing to hypertension. Recommendations for prehypertension include engaging in regular physical activity. We aimed to assess feasibility and acceptability and collect preliminary outcome data on ChiRunning for people with elevated blood pressure. ChiRunning is a commercially available running program based on the mindful movements of Tai Chi, which is aimed at decreasing injury ...

  5. Analysis of Test Run Problems and Solution Measures of Low-Temperature Methanol Wash Unit%低温甲醇洗装置试车问题分析及解决措施

    Institute of Scientific and Technical Information of China (English)

    王学军; 乔洪凯; 郭晓鹏

    2012-01-01

    A comparison is made of low-temperature methanol wash and NHD processes for removal of acid gases in large plants for chemical processing of coal. A description is given of the process flow and special features of the low-temperature methanol wash unit. Experience in the test run is presented, with emphasis on the problems encountered and their solutions, such as water plugging in the tube pass of heat exchanger ( E6 ) during start-up, thorough absorption of CO2 in gas delivery to the system, insufficient accuracy in adjustment of the butterfly valve and inability of two-way sealing of valves in the battery limit.%对大型煤化工酸性气体脱除采用的低温甲醇洗与NHD工艺进行了对比,概述了低温甲醇洗装置的工艺流程及特点.介绍了低温甲醇洗装置试车经验,重点阐述开车过程中出现的换热器(E6)管程水堵塞、系统导气时CO2彻底吸收、蝶阀调节精度不足和界区阀不能双向密封等问题及解决措施.

  6. 刘江黄河大桥主桥运行环境下的振动测试%Vibration Test of the Running Environment of the Main Bridge of Liujiang Yellow River Bridge

    Institute of Scientific and Technical Information of China (English)

    王洁

    2014-01-01

    Based on the vibration test of the running environment of the main bridge of Liujiang Yellow River Bridge measured vibration Liu Jiang Yellow River main bridge operating environment, this paper got the response vibration stability diagram of vertical and lateral acceleration under different frequencies, torsional vibration mode and torsional frequency, judged the effect of the damage of boom on vertical and lateral vibration, so as to predict the current operating status of bridge.%本文通过对刘江黄河大桥主桥运行环境下的振动实测,得到桥梁的在不同频率下的竖向加速度、横向加速度的响应振动稳定图,扭转振型及扭转频率,判断吊杆的损伤对横、竖向振动的影响,推知桥梁目前的运行状态。

  7. In vitro interaction cocktail assay for nine major cytochrome P450 enzymes with 13 probe reactions and a single LC/MSMS run: analytical validation and testing with monoclonal anti-CYP antibodies.

    Science.gov (United States)

    Tolonen, Ari; Petsalo, Aleksanteri; Turpeinen, Miia; Uusitalo, Jouko; Pelkonen, Olavi

    2007-07-01

    A sensitive and rugged LC/MSMS method was developed for a comprehensive in vitro metabolic interaction screening assay with N-in-1 approach reported earlier. A cocktail consisting of ten cytochrome P450 (CYP)-selective probe substrates with known kinetic, metabolic and interaction properties in vivo was incubated in a pool of human liver microsomes, and metabolites of melatonin (CYP1A2), coumarin (CYP2A6), bupropion (CYP2B6), amodiaquine (CYP2C8) tolbutamide (CYP2C9), omeprazole (CYP2C19 and CYP3A4), dextromethorphan (CYP2D6), chlorzoxazone (CYP2E1), midazolam (CYP3A4) and testosterone (CYP3A4) were simultaneously analysed with a single LC/MSMS run. Altogether, 13 metabolites and internal standard phenacetin were analysed in multiple reaction mode. Polarity switching mode was utilized to acquire negative ion mode electrospray data for hydroxychlorzoxazone and positive ionization data for the rest of the analytes. Fast gradient elution was applied, giving total injection cycle of 8 min. The method was modified for two different LC/MSMS systems, and was validated for linear range, detection limit, accuracy and precision for each metabolite. In addition, cocktail inhibition system was further tested using monoclonal anti-CYP antibodies as inhibitors for each probe reaction. Copyright (c) 2007 John Wiley & Sons, Ltd.

  8. 基于游程检验的上海股票市场弱式有效性研究%Effectiveness Research on Shanghai Stock Market Weakness Based on Runs Test

    Institute of Scientific and Technical Information of China (English)

    柴丽俊; 李先流

    2011-01-01

    有效市场假说理论是股票市场理论研究的基础之一,股票市场的有效性对政府的监管和投资者的投资策略都有着重要影响.本文选取2006年至2010年上海股票市场的一系列指数的日收盘价进行游程检验,得出上海股票市场是弱式有效市场的结论.%The efficient market hypothesis theory is one basis of the stock market theory research, the effectiveness of the stock market has a significant impact on government regulation and investment strategies of investors. This paper selects closing price in a series of indexes from 2006 to 2010 of Shanghai stock market to runs test, making the concluding of Shanghai stock market is weak form efficient market.

  9. A novel running mechanic's class changes kinematics but not running economy.

    Science.gov (United States)

    Craighead, Daniel H; Lehecka, Nick; King, Deborah L

    2014-11-01

    A novel method of running technique instruction, Midstance to Midstance Running (MMR), was studied to determine how MMR affected kinematics and running economy (RE) of recreational runners. An experimental pre-post randomized groups design was used. Participants (n = 18) were recreational runners who ran at least 3 days a week and 5 km per run. All testing was performed on a treadmill at 2.8 m·s. The intervention group (n = 9) completed 8 weeks of instruction in MMR; the control group (n = 9) continued running without instruction. The MMR group showed significant decreases in stride length (SL) (p = 0.02) and maximum knee flexion velocity in stance (p = 0.01), and a significant increase in stride rate (SR) (p = 0.02) after 8 weeks. No significant changes were found in heart rate, rating of perceived exertion, or RE. Midstance to Midstance Running was effective in changing SR and SL, but was not effective in changing other kinematic variables such as foot contact position and maximum knee flexion during swing. Midstance to Midstance Running did not affect RE. Evidence suggests that MMR may be an appropriate instructional method for recreational runners trying to decrease SL and increase SR.

  10. Development of a Rapid Immunodiagnostic Test for Pork Components in Raw Beef and Chicken Meats: a Preliminary Study

    Directory of Open Access Journals (Sweden)

    S. N. Depamede

    2011-08-01

    Full Text Available A rapid immunodiagnostic test that provides visual evidence of the presence of pork components in raw beef and chicken meats was developed. Colloidal gold was prepared and conjugated with anti-Swine IgG polyclonal antibody. Immunochromatographic test strips were produced, and then were used to test laboratory adulterated raw meat samples. The samples consisted adulteration meat, immunodiagnostic, pork, rapid test of pork-in-beef, or pork-in-chicken at 1/0; 1/100; 1/1,000; 1/5,000; 1/10,000 (w/w adulteration levels that were extracted in phosphate-buffered saline. Raw beef and chicken meats without pork were included as controls. Analysis was completed in 10 min. Detection limit was 1/5,000 (w/w, although 1/10,000 was also observed. This immunodiagnostic tests can be conveniently applied to detect low levels of pork components in raw beef and chicken meat products. For the commercial purposes, further studies need to be carried out.

  11. Contact sensitization in venous eczema: Preliminary results of patch testing with Indian standard series and topical medicaments

    Directory of Open Access Journals (Sweden)

    Jindal Rashmi

    2009-01-01

    Full Text Available Background and Aims: Elimination of allergens/topical medications causing contact dermatitis in venous eczema, which poses a significant problem in its chronicity and treatment, provides the basis for better therapeutic outcome. Our objective was to determine the pattern of contact sensitization in venous eczema patients in Himachal Pradesh (India. Methods: Thirty-four patients (M:F, 31:3 and 10 controls (M:F, 6:4 were patch tested with Indian standard series and 10 commonly used topical medicaments. Results: Positive patch test results were seen in 50% (M:F, 16:1 of the patients. Common allergens were Fragrance mix (15%, p-phenylendiamine (15%, nickel (9%, wool alcohol (9%, chinoform (9%, balsum of Peru (5%, cobalt chloride (5%, potassium dichromate (3%, epoxy resin (3%, thiuram mix (3% and formaldehyde (3%. Only sisomycin and miconazole among the topical medications elicited a positive patch test reaction in 3 and 5% patients, respectively. Neomycin contact sensitivity was not seen in any of the patients. One patient who had exacerbation of venous eczema following accidental application of topical diclofenac showed a positive patch test reaction to it. Conclusions: Patch test should be used to identify the topical agents that may be responsible for perpetuation or aggravation of eczema, especially in patients who do not improve despite adequate treatment of other underlying cause(s.

  12. PRELIMINARY ASSESSMENT OF NDE METHODS ON INSPECTION OF HDPE BUTT FUSION PIPING JOINTS FOR LACK OF FUSION WITH VALIDATION FROM MECHANICAL TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Doctor, Steven R.; Cinson, Anthony D.; Watts, Michael W.; Moran, Traci L.; Anderson, Michael T.

    2010-07-22

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, are being conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high density polyethylene (HDPE) pipe for assessing lack of fusion. The work provides information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high speed tensile impact test and the bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12 inch (30.5 cm) IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack of fusion conditions. Six of these butt joints were volumetrically examined with time of flight diffraction (TOFD), phased array (PA) ultrasound, and the Evisive microwave system. The outer diameter (OD) weld beads were removed for microwave evaluation and the pipes ultrasonically re-evaluated. In two of the six pipes both the outer and inner diameter (ID) weld beads were removed and the pipe joints re-evaluated. Several of the pipes were sectioned and the joints destructively evaluated with the following techniques: high speed tensile test, bend test, and focused immersion ultrasound on a joint section removed from the pipe coupled with slicing through the joint and examining the revealed surfaces. The fusion parameters, nondestructive, and destructive evaluation results will be correlated to validate the effectiveness of what each NDE technology detects and what each does not detect. This is an initial limited study which will aid in identifying key future work.

  13. Stibine/arsine monitoring during EV operation: summary report on preliminary tests at ANL and at LILCO

    Energy Technology Data Exchange (ETDEWEB)

    Loutfy, R.O.; Graczyk, D.G.; Varma, R.; Hayes, E.R.; Williams, F.L.; Yao, N.P.

    1981-02-01

    A series of tests was performed to monitor the evolution and dispersal of stibine and arsine from the lead-acid propulsion batteries in three different Electra-Van Model 600 vehicles operated by Argonne National Laboratory (ANL) and by the Long Island Lighting Company (LILCO). Ambient air was sampled at several locations inside the vehicles and in the garages where testing was done during charge, equalization charge, and on-the-road discharge operations. In addition, direct sampling of cell off-gases was performed with the ANL van. Interpretation of the individual test results was carried out in the context of vehicle characteristics, sampling protocol, and operating conditions. The test results demonstrated that under the test conditions only small concentrations of stibine and arsine accumulated in occupiable work areas. Measured concentrations in the vehicles and in the garages never exceeded 25% of the Threshold Limit Value-Time Weighted Average (TLV-TWA) standards. A threshold voltage for hydride production, at about 2.45 V per cell, was reflected in the results of the experiments performed during charging of the batteries. Hydride evolution rates were lower during equalization charge than during the overcharge portion of a charge cycle when the on-board charger was used in a normal operating mode. A delayed release of the metal hydrides from the battery cells was observed during on-the-road operation of the vehicles. The implications of these observations for electric vehicle (EV) operation are discussed. An engineering analysis of the generation and dispersal of the metal hydrides is presented, and equations are derived for estimating minimum ventilation requirements for the EV battery compartment and for garages housing EV operations. Recommendations are made regarding safe handling procedures for battery off-gases, procedures for conducting stibine/arsine monitoring tests and future work.

  14. Development and preliminary testing of a computerized Animated Activity Questionnaire (AAQ) in patients with hip and knee osteoarthritis

    DEFF Research Database (Denmark)

    Peter, Wf; Loos, M; de Vet, Hcw

    2015-01-01

    Objective To develop an Animated Activity Questionnaire (AAQ), based on video animations, for assessing activity limitations in patients with hip/knee osteoarthritis (OA), which combines the advantages of self-reported questionnaires and performance-based tests, without many of their limitations......, 4) existing measurement instruments, and 5) focus groups of patients. Test-retest reliability was assessed in 30/110 patients. In 110 patients correlations were calculated between AAQ and self-reported Hip disability and Knee injury Osteoarthritis Outcome ADL subscale (H/KOOS). In 45/110 patients...

  15. Design And Preliminary Testing of a Hammer Mill with End-Suction Lift Capability Suitable for Commercial Processing of Grains and Solid Minerals in Nigeria

    Directory of Open Access Journals (Sweden)

    Ebunilo P. O.

    2010-06-01

    Full Text Available A hammer mill with an end-suction lift capability has been designed, fabricated and tested. The tests were carried out by comparing the product of a conventional hammer mill with that of the new hammer mill with end suction lift capability. The preliminary test results obtained using grains show that the efficiency of a conventional hammer mill and its ability to produce an output of specific size of 400m-600m for both maize and cowpeas is low when compared with the output of the new hammer mill. The new hammer mill, which is a partially closed system while in operation and utilizes suction power, virtually eliminates environmental pollution usually associated with the operation of conventional hammer mills and can be used to mill commonly occurring Nigerian grains like millet, sorghum, maize, cowpeas, guinea-corn and soya beans into flour and also for pulverizing locally occurring solid minerals like clays into powder. This would diversify storage options for the grains, deepen and widen the available food choices for all Nigerians and enhance food security and rural development.

  16. Preliminary results of tests of proprietary chemical additives, seeding, and other approaches for the reduction of scale in hypersaline geothermal systems

    Energy Technology Data Exchange (ETDEWEB)

    Harrar, J.E.; Locke, F.E.; Otto, C.H. Jr.; Deutscher, S.B.; Lim, R.; Frey, W.P.; Quong, R.; Lorensen, L.E.

    1979-02-01

    The LLL field brine-scaling test system and a variety of measurement techniques have been used to test a group of eight proprietary additives from eight different companies, a hydroxyethylcellulose previously found to retard silica precipitation, and geothermal sludge as a seeding agent to reduce scaling. For each additive, scaling rates at both 210 and 125/sup 0/C and on three different materials--mild steel, Teflon, and Hastelloy C-276--were measured using test coupons. Sections of steel pipe and perforated screens also were exposed to the treated brine, silica precipitation rates in the effluent brine were measured by means of the electrochemical linear polarization resistance technique. Examination of the pipe sections and chemical analyses of the scales are not complete, thus only preliminary conclusions are reported here. It appears that, although none of the additives effected a dramatic reduction in scaling rates, several decreased the rate of scaling of mild steel at 125/sup 0/C by a factor of 2 to 3. Only hydroxyethylcellulose retards the rate of precipitation of silica in the effluent brine. Scaling rates could not be measured accurately in the seeding experiment because of its short duration, but this brine treatment had the desired effect, at 125/sup 0/C, of reducing the level of dissolved silica and hence the scaling tendency of the brine. Further experiments of this type will be conducted.

  17. The QCD running coupling

    Science.gov (United States)

    Deur, Alexandre; Brodsky, Stanley J.; de Téramond, Guy F.

    2016-09-01

    We review the present theoretical and empirical knowledge for αs, the fundamental coupling underlying the interactions of quarks and gluons in Quantum Chromodynamics (QCD). The dependence of αs(Q2) on momentum transfer Q encodes the underlying dynamics of hadron physics-from color confinement in the infrared domain to asymptotic freedom at short distances. We review constraints on αs(Q2) at high Q2, as predicted by perturbative QCD, and its analytic behavior at small Q2, based on models of nonperturbative dynamics. In the introductory part of this review, we explain the phenomenological meaning of the coupling, the reason for its running, and the challenges facing a complete understanding of its analytic behavior in the infrared domain. In the second, more technical, part of the review, we discuss the behavior of αs(Q2) in the high momentum transfer domain of QCD. We review how αs is defined, including its renormalization scheme dependence, the definition of its renormalization scale, the utility of effective charges, as well as "Commensurate Scale Relations" which connect the various definitions of the QCD coupling without renormalization-scale ambiguity. We also report recent significant measurements and advanced theoretical analyses which have led to precise QCD predictions at high energy. As an example of an important optimization procedure, we discuss the "Principle of Maximum Conformality", which enhances QCD's predictive power by removing the dependence of the predictions for physical observables on the choice of theoretical conventions such as the renormalization scheme. In the last part of the review, we discuss the challenge of understanding the analytic behavior αs(Q2) in the low momentum transfer domain. We survey various theoretical models for the nonperturbative strongly coupled regime, such as the light-front holographic approach to QCD. This new framework predicts the form of the quark-confinement potential underlying hadron spectroscopy and

  18. Oxygen cost of running barefoot vs. running shod.

    Science.gov (United States)

    Hanson, N J; Berg, K; Deka, P; Meendering, J R; Ryan, C

    2011-06-01

    The purpose of this study was to investigate the oxygen cost of running barefoot vs. running shod on the treadmill as well as overground. 10 healthy recreational runners, 5 male and 5 female, whose mean age was 23.8±3.39 volunteered to participate in the study. Subjects participated in 4 experimental conditions: 1) barefoot on treadmill, 2) shod on treadmill, 3) barefoot overground, and 4) shod overground. For each condition, subjects ran for 6 min at 70% vVO (2)max pace while VO (2), heart rate (HR), and rating of perceived exertion (RPE) were assessed. A 2 × 2 (shoe condition x surface) repeated measures ANOVA revealed that running with shoes showed significantly higher VO (2) values on both the treadmill and the overground track (pbarefoot. It was concluded that at 70% of vVO (2)max pace, barefoot running is more economical than running shod, both overground and on a treadmill.

  19. CDF RunRun Control and Online Monitor

    Institute of Scientific and Technical Information of China (English)

    T.Arisawa; W.Badgett; 等

    2001-01-01

    In this paper,we discuss the CDF RunRun Control and online event monitoring system.Run Control is the top level application that controls the data acquisition activities across 150 front end VME crates and related service processes,Run Control is a real-time multi-threaded application implemented in Java with flexible state machines,using JDBC database connections to configure clients,and including a user friendly and powerful graphical user interface.The CDF online event monitoring system consists of several parts;the eent monitoring programs,the display to browse their results,the server program which communicates with the display via socket connections ,the error receiver which displays error messages and communicates with run Control,and the state manager which monitors the state of the monitor programs.

  20. Running-based pica in rats. Evidence for the gastrointestinal discomfort hypothesis of running-based taste aversion.

    Science.gov (United States)

    Nakajima, Sadahiko; Katayama, Tomomi

    2014-12-01

    Voluntary running in an activity wheel establishes aversion to paired taste in rats. A proposed mechanism underlying this taste aversion learning is gastrointestinal discomfort caused by running. We tested this hypothesis by measuring the pica behavior (kaolin clay intake) of rats, because it is known that rats engage in pica behavior after various nausea-inducing treatments including irradiation, motion sickness, and injection of emetic drugs such as lithium chloride (LiCl). Following a demonstration of the already-known phenomenon of LiCl-based pica in Experiment 1, we successfully showed running-based pica behavior in Experiment 2 where the running treatment was compared with a non-running control treatment (i.e., confinement in a locked wheel). These results suggest that not only LiCl but also running induces nausea in rats, supporting the gastrointestinal discomfort hypothesis of running-based taste aversion learning.