Preliminary safety assessment of the WIPP facility

International Nuclear Information System (INIS)

Balestri, R.J.; Torres, B.W.; Pahwa, S.B.; Brannen, J.P.

1979-01-01

This paper summarizes the efforts to perform a safety assessment of the Waste Isolation Pilot Plant (WIPP) facility being proposed for southeastern New Mexico. This preliminary safety assessment is limited to a consequence assessment in terms of the dose to a maximally exposed individual as a result of introducing the radionuclides into the biosphere. The extremely low doses to the organs as a result of the liquid breach scenarios are contrasted with the background radiation

Preliminary Technology Maturation Plan for Immobilization of High-Level Waste in Glass Ceramics

Energy Technology Data Exchange (ETDEWEB)

Vienna, John D.; Crum, Jarrod V.; Sevigny, Gary J.; Smith, G L.

2012-09-30

A technology maturation plan (TMP) was developed for immobilization of high-level waste (HLW) raffinate in a glass ceramics waste form using a cold-crucible induction melter (CCIM). The TMP was prepared by the following process: 1) define the reference process and boundaries of the technology being matured, 2) evaluate the technology elements and identify the critical technology elements (CTE), 3) identify the technology readiness level (TRL) of each of the CTE’s using the DOE G 413.3-4, 4) describe the development and demonstration activities required to advance the TRLs to 4 and 6 in order, and 5) prepare a preliminary plan to conduct the development and demonstration. Results of the technology readiness assessment identified five CTE’s and found relatively low TRL’s for each of them: • Mixing, sampling, and analysis of waste slurry and melter feed: TRL-1 • Feeding, melting, and pouring: TRL-1 • Glass ceramic formulation: TRL-1 • Canister cooling and crystallization: TRL-1 • Canister decontamination: TRL-4 Although the TRL’s are low for most of these CTE’s (TRL-1), the effort required to advance them to higher values. The activities required to advance the TRL’s are listed below: • Complete this TMP • Perform a preliminary engineering study • Characterize, estimate, and simulate waste to be treated • Laboratory scale glass ceramic testing • Melter and off-gas testing with simulants • Test the mixing, sampling, and analyses • Canister testing • Decontamination system testing • Issue a requirements document • Issue a risk management document • Complete preliminary design • Integrated pilot testing • Issue a waste compliance plan A preliminary schedule and budget were developed to complete these activities as summarized in the following table (assuming 2012 dollars). TRL Budget Year MSA FMP GCF CCC CD Overall $M 2012 1 1 1 1 4 1 0.3 2013 2 2 1 1 4 1 1.3 2014 2 3 1 1 4 1 1.8 2015 2 3 2 2 4 2 2.6 2016 2 3 2 2 4 2 4

Preliminary risk assessments of the small HTGR

International Nuclear Information System (INIS)

Everline, C.J.; Bellis, E.A.

1985-05-01

Preliminary investment and safety risk assessments were performed for a preconceptual design of a four-module 250-MW(t) side-by-side steel-vessel pebble bed HTGR plant. Broad event spectra were analyzed involving component damage resulting in unscheduled plant outages and fission product releases resulting in offsite doses. The preliminary assessment indicates at this stage of the design that two categories of events govern the investment risk envelope: primary coolant leaks which release some circulating and plate-out activity that contaminates the confinement and turbogenerator damage which involves extensive turbine blade failure. Primary coolant leaks are important contributors because associated cleanup and decontamination requirements result in longer outages that arise from other events with comparable frequencies. Turbogenerator damage is the salient low-frequency investment risk accident due to the relatively long outages being experienced in the industry. Thermal transients are unimportant investment risk contributors because pressurized core heatups cause little damage, and depressurized core heatups occur at negligible frequencies relative to the forced outage goal. These preliminary results demonstrate investment and safety risk goal compliance at this stage in the design process. Studies are continuing in order to provide valuable insights into risk-significant events to assure a balanced approach to meeting user and regulatory requirements

TECHNOLOGY FOR INSTALLATION OF REINFORCED CONCRETE FLOOR SLABS LIGHTENED BY CORE DRIVERS WITH PRELIMINARY REINFORCEMENT STRESS

Directory of Open Access Journals (Sweden)

S. N. Leonovich

2015-01-01

Full Text Available The paper presents technology for installation of floor slabs lightened by plastic core drivers which are preliminary stressed under construction conditions.  Efficiency of such constructive solution is justified by the action of preliminary concrete compression in the tensile zone while reducing structure dead weight due to void arrangement.  The paper provides classification of systems for preliminary stress and contains recommendations on selection of the system depending on peculiariar features of the designed construction.  Main products and materials required for execution of works , requirements to stressed wire rope reinforcement, its main characteristics have been considered in the paper.Principal diagram of the lightened preliminary stressed slab stipulates arrangement of so called  dummy caisson. Strands of reinforcement ropes are located within the framework of bars passing over supporting structures (over vertical bearing structures of  the framework and voids are formed in the cells between bars by laying hollow plastic items joined together by a cage. The paper presents technological sequence of operations required for arrangement of the lightened preliminary stressed slab, schemes for equipment arrangement and characteristics of the applied devices and units (pushing device for reinforcement ropes, hydraulic jack with delivery hydraulic pump, mixing station, injection pump and others.  Recommendations have been given for execution of works in cold weather. The paper considers problems pertaining to control quality of the materials and items which are supplied to a construction site and directly execution of works on preliminary stress of a cellular slab.The executed analysis of technology permits to conclude that it is characterized by high level of applicability for import substitution. It is necessary to consider the possibility to apply the technology at objects of various application while comparing it with other

Preliminary geological suitability assessment for LILW disposal

International Nuclear Information System (INIS)

Tomse, P.; Mele, I.

2001-01-01

Due to the growing need for a final disposal of LILW, the final solution for the short-lived LILW is the key issue of radioactive waste management in Slovenia at the moment. ARAO - the Slovenian Agency for Radwaste Management - is intensely involved in the re-initiated site selection process for a LILW repository. In this new process we are trying to combine as best as possible the technical, geologically-led and the advocacy-site selection processes. By a combination of technical and volunteer approach to the site selection we wish to guarantee high public involvement and sufficient flexibility of the process to adapt to specific conditions or new circumstances while the project is ongoing. In the technical phase, our tendency is to retain a larger number of potential areas/sites. We also keep open the possibility of choosing the type of repository. The decision between the surface and underground option will be made only once the site has been defined. In accordance with the IAEA recommendations the site selection process is divided into four stages: the conceptual and planning stage, area survey stage, site characterisation stage and site confirmation stage. Last year the area survey stage was started. In the preliminary geological suitability assessment the required natural predisposition of Slovene territory was assessed in order to locate geologically suitable formations. The assessment of natural conditions of the system was based on consideration of the main geological, hydro-geological and seismotectonic conditions. It was performed with ARC/INFO technology. The results are compiled in a map, showing potential areas for underground and surface disposal of LILW in Slovenia. It has been established that there is a potential suitability for both surface and underground disposal on about 10 000 km 2 of the Slovenian territory, which represents almost half of the entire Slovenian territory. These preliminary results are now being carefully re-examined. As an

TECHNOLOGY FOR INSTALLATION OF REINFORCED CONCRETE FLOOR SLABS LIGHTENED BY CORE DRIVERS WITH PRELIMINARY REINFORCEMENT STRESS

OpenAIRE

S. N. Leonovich; I. I. Peredkov

2015-01-01

The paper presents technology for installation of floor slabs lightened by plastic core drivers which are preliminary stressed under construction conditions.  Efficiency of such constructive solution is justified by the action of preliminary concrete compression in the tensile zone while reducing structure dead weight due to void arrangement.  The paper provides classification of systems for preliminary stress and contains recommendations on selection of the system depending on peculiariar fe...

Preliminary radiological assessments of low-level waste repositories

International Nuclear Information System (INIS)

Nancarrow, D.J.; Sumerling, T.J.; Ashton, J.

1988-06-01

Preliminary assessments of the post-closure radiological impact from the disposal of low-level radioactive wastes in shallow engineered facilities at four sites are presented. This provides a framework to practice and refine a methodology that could be used, on behalf of the Department, for independent assessment of any similar proposal from Nirex. Information and methodological improvements that would be required are identified. (author)

78 FR 42520 - Control Technology, Inc.; Notice of Preliminary Permit Application Accepted for Filing and...

Science.gov (United States)

2013-07-16

... Technology, Inc.; Notice of Preliminary Permit Application Accepted for Filing and Soliciting Comments, Motions To Intervene, and Competing Applications On December 18, 2012, Control Technology, Inc. filed an... lower reservoir, (3) a reinforced concrete penstock with intake/outlet structure in the upper reservoir...

The preliminary research for biosynthetic engineering by radiation fusion technology

Energy Technology Data Exchange (ETDEWEB)

Roh, Chang Hyun; Jung, U Hee; Park, Hae Ran [KAERI, Daejeon (Korea, Republic of)

2012-01-15

The purpose of this project is to elucidate the solution to the production of bioactive substance using biotransformation process from core technology of biosynthetic engineering by radiation fusion technology. And, this strategy will provide core technology for development of drugs as new concept and category. Research scopes and contents of project include 1) The development of mutant for biosynthetic engineering by radiation fusion technology 2) The development of host for biosynthetic engineering by radiation fusion technology 3) The preliminary study for biosynthetic engineering of isoflavone by radiation fusion technology. The results are as follows. Isoflavone compounds(daidzein, hydroxylated isoflavone) were analyzed by GC-MS. The study of radiation doses and p-NCA high-throughput screening for mutant development were elucidated. And, it was carried out the study of radiation doses for host development. Furthermore, the study of redox partner and construction of recombinant strain for region-specific hydroxylation(P450, redox partner). In addition, the biological effect of 6,7,4'-trihydroxyisoflavone as an anti-obesity agent was elucidated in this study.

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992

International Nuclear Information System (INIS)

1992-01-01

This volume documents model parameters chosen as of July 1992 that were used by the Performance Assessment Department of Sandia National Laboratories in its 1992 preliminary performance assessment of the Waste Isolation Pilot Plant (WIPP). Ranges and distributions for about 300 modeling parameters in the current secondary data base are presented in tables for the geologic and engineered barriers, global materials (e.g., fluid properties), and agents that act upon the WIPP disposal system such as climate variability and human-intrusion boreholes. The 49 parameters sampled in the 1992 Preliminary Performance Assessment are given special emphasis with tables and graphics that provide insight and sources of data for each parameter

DWI-based neural fingerprinting technology: a preliminary study on stroke analysis.

Science.gov (United States)

Ye, Chenfei; Ma, Heather Ting; Wu, Jun; Yang, Pengfei; Chen, Xuhui; Yang, Zhengyi; Ma, Jingbo

2014-01-01

Stroke is a common neural disorder in neurology clinics. Magnetic resonance imaging (MRI) has become an important tool to assess the neural physiological changes under stroke, such as diffusion weighted imaging (DWI) and diffusion tensor imaging (DTI). Quantitative analysis of MRI images would help medical doctors to localize the stroke area in the diagnosis in terms of structural information and physiological characterization. However, current quantitative approaches can only provide localization of the disorder rather than measure physiological variation of subtypes of ischemic stroke. In the current study, we hypothesize that each kind of neural disorder would have its unique physiological characteristics, which could be reflected by DWI images on different gradients. Based on this hypothesis, a DWI-based neural fingerprinting technology was proposed to classify subtypes of ischemic stroke. The neural fingerprint was constructed by the signal intensity of the region of interest (ROI) on the DWI images under different gradients. The fingerprint derived from the manually drawn ROI could classify the subtypes with accuracy 100%. However, the classification accuracy was worse when using semiautomatic and automatic method in ROI segmentation. The preliminary results showed promising potential of DWI-based neural fingerprinting technology in stroke subtype classification. Further studies will be carried out for enhancing the fingerprinting accuracy and its application in other clinical practices.

Clean Energy Technologies: A Preliminary Inventory of the Potential for Electricity Generation

Energy Technology Data Exchange (ETDEWEB)

Bailey, Owen; Worrell, Ernst

2005-08-03

be unused and convert it to electricity or useful thermal energy. Recycled energy produces no or little increase in fossil fuel consumption and pollutant emissions. Examples of energy recycling methods include industrial gasification technologies to increase energy recovery, as well as less traditional CHP technologies, and the use of energy that is typically discarded from pressure release vents or from the burning and flaring of waste streams. These energy recovery technologies have the ability to reduce costs for power generation. This report is a preliminary study of the potential contribution of this ''new'' generation of clean recycled energy supply technologies to the power supply of the United States. For each of the technologies this report provides a short technical description, as well as an estimate of the potential for application in the U.S., estimated investment and operation costs, as well as impact on air pollutant emission reductions. The report summarizes the potential magnitude of the benefits of these new technologies. The report does not yet provide a robust cost-benefit analysis. It is stressed that the report provides a preliminary assessment to help focus future efforts by the federal government to further investigate the opportunities offered by new clean power generation technologies, as well as initiate policies to support further development and uptake of clean power generation technologies.

76 FR 63628 - Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR)

Science.gov (United States)

2011-10-13

...] Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR) AGENCY: Federal... Individual Assistance Operations Manual (9327.2-PR). DATES: Comments must be received by November 14, 2011... of the draft Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR) on...

Assessing medical technologies in development; a new paradigm of medical technology assessment

NARCIS (Netherlands)

Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard

2000-01-01

Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on

Assessing medical technologies in development - A new paradigm of medical technology assessment

NARCIS (Netherlands)

Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G

2000-01-01

Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on

Environmental Survey preliminary report, Morgantown Energy Technology Center, Morgantown, West Virginia

Energy Technology Data Exchange (ETDEWEB)

1988-06-01

This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Morgantown Energy Technology Center (METC) conducted November 30 through December 4, 1987. In addition, the preliminary findings of the Laramie Project Office (LPO) Survey, which was conducted as part of the METC Survey on January 25 through 29, 1988, are presented in Appendices E and F. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with METC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at METC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities at METC. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the results will be incorporated into the METC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey METC. 60 refs., 28 figs., 43 tabs.

DWI-Based Neural Fingerprinting Technology: A Preliminary Study on Stroke Analysis

Directory of Open Access Journals (Sweden)

Chenfei Ye

2014-01-01

Full Text Available Stroke is a common neural disorder in neurology clinics. Magnetic resonance imaging (MRI has become an important tool to assess the neural physiological changes under stroke, such as diffusion weighted imaging (DWI and diffusion tensor imaging (DTI. Quantitative analysis of MRI images would help medical doctors to localize the stroke area in the diagnosis in terms of structural information and physiological characterization. However, current quantitative approaches can only provide localization of the disorder rather than measure physiological variation of subtypes of ischemic stroke. In the current study, we hypothesize that each kind of neural disorder would have its unique physiological characteristics, which could be reflected by DWI images on different gradients. Based on this hypothesis, a DWI-based neural fingerprinting technology was proposed to classify subtypes of ischemic stroke. The neural fingerprint was constructed by the signal intensity of the region of interest (ROI on the DWI images under different gradients. The fingerprint derived from the manually drawn ROI could classify the subtypes with accuracy 100%. However, the classification accuracy was worse when using semiautomatic and automatic method in ROI segmentation. The preliminary results showed promising potential of DWI-based neural fingerprinting technology in stroke subtype classification. Further studies will be carried out for enhancing the fingerprinting accuracy and its application in other clinical practices.

Information technology resources assessment

Energy Technology Data Exchange (ETDEWEB)

Stevens, D.F. [ed.

1992-01-01

This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

Information technology resources assessment

Energy Technology Data Exchange (ETDEWEB)

Stevens, D.F. (ed.)

1992-01-01

This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

Technology assessment of thermal treatment technologies using ORWARE

International Nuclear Information System (INIS)

Assefa, G.; Eriksson, O.; Frostell, B.

2005-01-01

A technology assessment of thermal treatment technologies for wastes was performed in the form of scenarios of chains of technologies. The Swedish assessment tool, ORWARE, was used for the assessment. The scenarios of chains of thermal technologies assessed were gasification with catalytic combustion, gasification with flame combustion, incineration and landfilling. The landfilling scenario was used as a reference for comparison. The technologies were assessed from ecological and economic points of view. The results are presented in terms of global warming potential, acidification potential, eutrophication potential, consumption of primary energy carriers and welfare costs. From the simulations, gasification followed by catalytic combustion with energy recovery in a combined cycle appeared to be the most competitive technology from an ecological point of view. On the other hand, this alternative was more expensive than incineration. A sensitivity analysis was done regarding electricity prices to show which technology wins at what value of the unit price of electricity (SEK/kW h). Within this study, it was possible to make a comparison both between a combined cycle and a Rankine cycle (a system pair) and at the same time between flame combustion and catalytic combustion (a technology pair). To use gasification just as a treatment technology is not more appealing than incineration, but the possibility of combining gasification with a combined cycle is attractive in terms of electricity production. This research was done in connection with an empirical R and D work on both gasification of waste and catalytic combustion of the gasified waste at the Division of Chemical Technology, Royal Institute of Technology (KTH), Sweden

Development Module Oriented Science Technology Society Indue Science Literacy Assessment for 7th-Grade Junior High School Students in 2nd -Semester

Science.gov (United States)

Arbi, Y. R.; Sumarmin, R.; Putri, D. H.

2018-04-01

The problem in the science learning process is the application of the scientific approach takes a long time in order to provide conceptual understanding to the students, there is no teaching materials that can measure students reasoning and thinking ability, and the assessment has not measured students reasoning and literacy skills.The effort can be done is to develop science technology society module indue science literacy assessment. The purpose of the research was to produce a module oriented society indue science science technology literacy assessment. The research is development research using Plomp model, consist of preliminary, prototyping, and assessment phase. Data collect by questionnare and documantion. The result there is science technology society module indue science literacy assessment is very valid.

White paper: Preliminary assessment of LNG vehicle technology, economics, and safety issues (Revision 1). Topical report, April-August 1991

International Nuclear Information System (INIS)

Powars, C.; Lucher, D.; Moyer, C.; Browning, L.

1992-01-01

The objective of the study is to evaluate the potential of LNG as a vehicle fuel, to determine market niches, and to identify needed technology improvements. The white paper is being issued when the work is approximately 30 percent complete to preview the study direction, draw preliminary conclusions, and make initial recommendations. Interim findings relative to LNG vehicle technology, economics, and safety are presented. It is important to decide if heavier hydrocarbons should be allowed in LNG vehicle fuel. Development of suitable refueling couplings and vehicle fuel supply pressure systems are recommended. Initial economics analyses considered transit buses and pickup and delivery trucks fueled via onsite liquefiers and imported LNG. Net user costs were more than (but in some cases close to) those for diesel fuel and gasoline. Lowering the cost of small-scale liquefiers would significantly improve the economics of LNG vehicles. New emissions regulations may introduce considerations beyond simple cost comparisons. LNG vehicle safety and available accident data are reviewed. Consistent codes for LNG vehicles and refueling facilities are needed

Health technology assessment in Finland

DEFF Research Database (Denmark)

Mäkelä, Marjukka; Roine, Risto P

2010-01-01

Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency,...... findings. The Managed Uptake of Medical Methods program links the hospital districts to agree on introduction of technologies. The Ohtanen database provides Finnish-language summaries of major assessments made in other countries.......Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency......, with special responsibility in providing assessments to underpin national policies in screening. External evaluations enhanced the rapid growth. In the Finnish environment, decision making on health technologies is extremely decentralized, so Finohta has developed some practical tools for implementing HTA...

A preliminary assessment of the chemical and microbial water ...

African Journals Online (AJOL)

A preliminary assessment of the chemical and microbial water quality of the Chunies River - Limpopo: short communication. ... For this purpose sampling was undertaken on 25 and 26 May 2002, and a range of chemical (macro-elements, micro-elements and heavy metals) and microbial variables (HPC, total coliforms and ...

Risk assessment research and technology assessment

International Nuclear Information System (INIS)

Albach, H.; Schade, D.; Sinn, H.

1991-01-01

The concepts and approaches for technology assessment, the targets and scientific principles, as well as recognizable deficits and recommendations concerning purposeful strategies for the promotion of this research field require a dialog between those concerned. Conception, deficits, and the necessary measures for risk assessment research and technology assessment were discussed as well as ethical aspects. The problematic nature of using organisms altered through genetic engineering in the open land, traffic and transport, site restoration, nuclear energy, and isotope applications were subjects particularly dealt with. (DG) [de

Preliminary seismic design cost-benefit assessment of the tuff repository waste-handling facilities

International Nuclear Information System (INIS)

Subramanian, C.V.; Abrahamson, N.; Hadjian, A.H.

1989-02-01

This report presents a preliminary assessment of the costs and benefits associated with changes in the seismic design basis of waste-handling facilities. The objectives of the study are to understand the capability of the current seismic design of the waste-handling facilities to mitigate seismic hazards, evaluate how different design levels and design measures might be used toward mitigating seismic hazards, assess the costs and benefits of alternative seismic design levels, and develop recommendations for possible modifications to the seismic design basis. This preliminary assessment is based primarily on expert judgment solicited in an interdisciplinary workshop environment. The estimated costs for individual attributes and the assumptions underlying these cost estimates (seismic hazard levels, fragilities, radioactive-release scenarios, etc.) are subject to large uncertainties, which are generally identified but not treated explicitly in this preliminary analysis. The major conclusions of the report do not appear to be very sensitive to these uncertainties. 41 refs., 51 figs., 35 tabs

Preliminary radiological assessments of near-surface low-level radioactive waste repositories

International Nuclear Information System (INIS)

Sumerling, T.J.; Nancarrow, D.J.

1988-08-01

This report summarises preliminary assessments of post-closure radiological impact of LLW repositories at four sites previously under investigation by UK Nirex Ltd. The objectives of the assessments were: to demonstrate a methodology for site specific assessments, to identify important information requirements for detailed assessments; to identify methodological and research requirements. Doses and risks due to groundwater pathways, human intrusion, gaseous release and natural environmental change are estimated. (author)

Preliminary assessment of an S.G.H.W. type research reactor

International Nuclear Information System (INIS)

Bicevskis, A.; Chapman, A.G.; Hesse, E.W.

1970-08-01

A preliminary design study has been made of a research reactor, based on the enriched S.G.H.W.R. concept, to be used for power reactor fuel irradiation, isotope production, basic research, and training in nuclear technology. A reactor physics assessment established a core size which would allow uninterrupted operation for the required irradiation period consistent with low capital and operating costs. A design was selected with 24 channels, a D 2 O calandria diameter of 2.7 m and an overall core height of 4.0 m. The capital cost was estimated as $750,000 for the fuel and $1,600,000 for the moderator, the refuelling cost being $340,000 per annum. A thermal design study showed that the fission heat of 65 MW could be transmitted to pressurised light water at 200 lb/in 2 abs. and rejected to sea water in two conventional U-tube heat exchangers. The basic design is flexible and can be adapted to meet many special requirements. (author)

Technology assessments

International Nuclear Information System (INIS)

Rohwer, P.S.; Anderson, D.L.; Christian, D.J.

1978-01-01

Theoretical studies in assessment methodology have concentrated in the past year on computerization of state-of-the-art models for internal radiation dosimetry and development and evaluation of environmental transport models. Methodology applications continued to cover a broad spectrum of radiation exposure scenarios. Potential exposure situations requiring assessment arise from assorted deployments of all parts of nuclear fuel cycles, including comparisons of alternative uranium and thorium based cycles, and preliminary evaluations of advanced reactor fuel concepts. Measurements and samples were collected characterizing and documenting the current radiological status of formerly used Manhattan Engineer District/Atomic Energy Commission (MED/AEC) sites. This survey program encompasses research activities in the areas of survey design, instrumentation development, sample analysis, and data reduction and analysis. Other laboratory activities within TAS center around the unique capabilities of the Health Physics Research Reactor (HPRR) as an irradiation source. Typically the HPRR was involved in testing and intercomparison of dosimetry and criticality alarm systems and in exposure of physical and biological experiments

Lockheed Martin T-Rex: Preliminary report

International Nuclear Information System (INIS)

1997-01-01

T-Rex is a robot which may be used in toxic or flammable environments. The assessment of the T-Rex conducted at the Lockheed Martin facility was limited in its scope. The scope of the assessment was directed by the type of equipment being used and the amount of accessibility to the equipment. Due to severe time constraints--the assessment was conducted in one day--human factors interface activities were limited. This should be considered a preliminary assessment. This report covers aspects of the technology that were available to the assessment team. Recommendations for future evaluation of this technology are also included. The contents are as follows: Electrical Considerations; General Electrical Consideration; Trailing Cables; Grounding; Surface High Voltage Distribution; Low and Medium Voltage Alternating Current Circuits; Potential for Harmful Human Factor Incidents and Enterprise Disablement; Exclusion Zone Emergency Maintenance; and Recommendations

Information Technology and Literacy Assessment.

Science.gov (United States)

Balajthy, Ernest

2002-01-01

Compares technology predictions from around 1989 with the technology of 2002. Discusses the place of computer-based assessment today, computer-scored testing, computer-administered formal assessment, Internet-based formal assessment, computerized adaptive tests, placement tests, informal assessment, electronic portfolios, information management,…

Bats roosting in public buildings: A preliminary assessment from ...

African Journals Online (AJOL)

Madagascar has many synanthropic bat species but relatively little is known about how people interact with them. A preliminary assessment on the presence of bats in buildings and their interactions with people was conducted in the eastern town of Moramanga. Fifty of the 156 buildings were reported to contain active bat ...

Technology Performance Level Assessment Methodology.

Energy Technology Data Exchange (ETDEWEB)

Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

2017-04-01

The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

Decontamination technology assessment

International Nuclear Information System (INIS)

Allen, R.P.; Konzek, G.J.; Schneider, K.R.; Smith, R.I.

1988-10-01

This study identifies and technically assesses foreign decontamination and decommissioning (D and D) technology developments that may represent significant improvements over D and D technology currently available or under development in the United States. Technology need areas for nuclear power reactor decommissioning operations were identified and prioritized using the results of past light water reactor (LWR) decommissioning studies to quantitatively evaluate the potential for reducing cost and decommissioning worker radiation dose for each major decommissioning activity. Based on these identified needs, current foreign D and D technologies of potential interest to the US were identified through personal contacts and the collection and review of an extensive body of D and D literature. These technologies were then assessed qualitatively to evaluate their uniqueness, potential for a significant reduction in D and D costs and/or worker radiation dose, development status, and other factors affecting their value and applicability to US needs. 4 refs

ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Larisa Alexejevna Ismagilova

2016-12-01

Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

A Preliminary Assessment of Groundwater Samples around a Filling ...

African Journals Online (AJOL)

This paper is a preliminary assessment of groundwater samples around a filling station in Diobu area of Port Harcourt for four years at intervals of two years with a view to determine the level of groundwater pollution. It examines the physiochemical, major ions and heavy metal aspect of groundwater quality around the study ...

Preliminary Safeguards Assessment for the Pebble-Bed Fluoride High-Temperature Reactor (PB-FHR) Concept

Energy Technology Data Exchange (ETDEWEB)

Disser, Jay; Arthur, Edward; Lambert, Janine

2016-09-01

This report examines a preliminary design for a pebble bed fluoride salt-cooled high temperature reactor (PB-FHR) concept, assessing it from an international safeguards perspective. Safeguards features are defined, in a preliminary fashion, and suggestions are made for addressing further nuclear materials accountancy needs.

Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

Energy Technology Data Exchange (ETDEWEB)

1988-09-01

This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

Decontamination technology assessment

International Nuclear Information System (INIS)

Allen, R.P.; Konzek, G.J.; Schneider, K.J.; Smith, R.I.

1988-01-01

This study was conducted by the Pacific Northwest Laboratory (PNL) for the U.S. Department of Energy (DOE) to identify and technically assess foreign decontamination and decommissioning (D and D) technology developments that may represent significant improvements over D and D technology currently available or under development in the United States. Technology need areas for nuclear power reactor decommissioning operations were identified and prioritized using the results of past light water rector (LWR) decommissioning studies to quantitatively evaluate the potential for reducing cost and decommissioning worker radiation dose for each major decommissioning activity. Based on these identified needs, current foreign D and D technologies of potential interest to the U.S. were identified through personal contacts and the collection and review of an extensive body of D and D literature. These technologies were then assessed qualitatively to evaluate their uniqueness, potential for a significant reduction in D and D costs and/or worker radiation dose, development status, and other factors affecting their value and applicability to U.S. needs

Preliminary investigations for technology assessment of 99Mo production from LEU [low enriched uranium] targets

International Nuclear Information System (INIS)

Vandegrift, G.F.; Chaiko, D.J.; Heinrich, R.R.; Kucera, E.T.; Jensen, K.J.; Poa, D.S.; Varma, R.; Vissers, D.R.

1986-11-01

This paper presents the results of preliminary studies on the effects of substituting low enriched uranium (LEU) for highly enriched uranium (HEU) in targets for the production of fission product 99 Mo. Issues that were addressed are: (1) purity and yield of the 99 Mo//sup 99m/Tc product, (2) fabrication of LEU targets and related concerns, and (3) radioactive waste. Laboratory experimentation was part of the efforts for issues (1) and (2); thus far, radioactive waste disposal has only been addressed in a paper study. Although the reported results are still preliminary, there is reason to be optimistic about the feasibility of utilizing LEU targets for 99 Mo production. 37 refs., 1 fig., 5 tabs

Effects of energy development on ground water quality: an overview and preliminary assessment

International Nuclear Information System (INIS)

Parker, W.M. III; Yin, S.C.L.; Davis, M.J.; Kutz, W.J.

1981-07-01

A preliminary national overview of the various effects on ground water quality likely to result from energy development. Based on estimates of present and projected energy-development activities, those regions of the country are identified where ground water quality has the potential for being adversely affected. The general causes of change in ground water quality are reviewed. Specific effects on ground water quality of selected energy technologies are discussed, and some case-history material is provided. A brief overview of pertinent legislation relating to the protection and management of ground water quality is presented. Six methodologies that have some value for assessing the potential effects on ground water quality of energy development activities are reviewed. A method of identifying regions in the 48 contiguous states where there is a potential for ground water quality problems is described and then applied

40 CFR 300.305 - Phase II-Preliminary assessment and initiation of action.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 27 2010-07-01 2010-07-01 false Phase II-Preliminary assessment and initiation of action. 300.305 Section 300.305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... the OSC is informed of their activities in natural resource damage assessment that may affect response...

Preliminary assessment report for National Guard Training Center, Georgia Army National Guard, Fort Stewart, Georgia

International Nuclear Information System (INIS)

1993-07-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Georgia Army National Guard (GAARNG) facility near Hinesville, Georgia, known as the National Guard Training Center (NGTC). Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a priority basis for completing corrective actions (where necessary) in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining previous site activities, types and quantities of hazardous substances utilized, and potential pathways by which contamination could affect public health and the environment. The scope of this assessment is limited to the facilities and past activities contained within the NGTC. Preliminary assessment site score sheet information is also provided for the NGTC. However, this assessment report is intended to be read in conjunction with a previous IRP assessment of Fort Stewart completed in 1992 (USATHAMA 1992) and to provide comprehensive information on the NGTC area for incorporation with information contained in that previous assessment for the entirety of Fort Stewart

Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

International Nuclear Information System (INIS)

White, Maurice A.; Qiu Songgang; Augenblick, Jack E.

2000-01-01

Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's)

Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

Science.gov (United States)

White, Maurice A.; Qiu, Songgang; Augenblick, Jack E.

2000-01-01

Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's). .

Approaches to Assessing Technological Literacy

Science.gov (United States)

Pearson, Greg

2006-01-01

It is the conclusion of the Committee on Assessing Technological Literacy, a study panel appointed by the National Academy of Engineering and the National Research Council, that very little is known about what children or adults know, can do, and believe about technology. This is because the state of assessment related to technology--or, …

An explorative study of the technology transfer coach as a preliminary for the design of a computer aid

OpenAIRE

Jönsson, Oscar

2014-01-01

The university technology transfer coach has an important role in supporting the commercialization of research results. This thesis has studied the technology transfer coach and their needs in the coaching process. The goal has been to investigate information needs of the technology transfer coach as a preliminary for the design of computer aids.Using a grounded theory approach, we interviewed 17 coaches working in the Swedish technology transfer environment. Extracted quotes from interviews ...

EXPLOSION POTENTIAL ASSESSMENT OF HEAT EXCHANGER NETWORK AT THE PRELIMINARY DESIGN STAGE

Directory of Open Access Journals (Sweden)

MOHSIN PASHA

2016-07-01

Full Text Available The failure of Shell and Tube Heat Exchangers (STHE is being extensively observed in the chemical process industries. This failure can cause enormous production loss and have a potential of dangerous consequences such as an explosion, fire and toxic release scenarios. There is an urgent need for assessing the explosion potential of shell and tube heat exchanger at the preliminary design stage. In current work, inherent safety index based approach is used to resolve the highlighted issue. Inherent Safety Index for Shell and Tube Heat Exchanger (ISISTHE is a newly developed index for assessing the inherent safety level of a STHE at the preliminary design stage. This index is composed of preliminary design variables and integrated with the process design simulator (Aspen HYSYS. Process information can easily be transferred from process design simulator to MS Excel spreadsheet owing to this integration. This index could potentially facilitate the design engineer to analyse the worst heat exchanger in the heat exchanger network. Typical heat exchanger network of the steam reforming process is presented as a case study and the worst heat exchanger of this network has been identified. It is inferred from this analysis that shell and tube heat exchangers possess high operating pressure, corrected mean temperature difference (CMTD and flammability and reactive potential needs to be critically analysed at the preliminary design stage.

Ion exchange technology assessment report

International Nuclear Information System (INIS)

Duhn, E.F.

1992-01-01

In the execution of its charter, the SRS Ion Exchange Technology Assessment Team has determined that ion exchange (IX) technology has evolved to the point where it should now be considered as a viable alternative to the SRS reference ITP/LW/PH process. The ion exchange media available today offer the ability to design ion exchange processing systems tailored to the unique physical and chemical properties of SRS soluble HLW's. The technical assessment of IX technology and its applicability to the processing of SRS soluble HLW has demonstrated that IX is unquestionably a viable technology. A task team was chartered to evaluate the technology of ion exchange and its potential for replacing the present In-Tank Precipitation and proposed Late Wash processes to remove Cs, Sr, and Pu from soluble salt solutions at the Savannah River Site. This report documents the ion exchange technology assessment and conclusions of the task team

Egypt--United States cooperative energy assessment: report on preliminary discussions

Energy Technology Data Exchange (ETDEWEB)

1978-04-01

Egyptian and U.S. Government representatives met in Cairo during the period of February 14-22, 1978 to discuss a cooperative Egypt-U.S. assessment of the energy demand and supply options available to Egypt. This report summarizes those preliminary discussions. The discussions accomplished the following: the background and objectives of the U.S. initiative for a cooperative energy assessment with Egypt were explained; Egyptian electric energy activities and their priorities were presented; methods under consideration for the systematic identification and assessment of energy options available to Egypt were explained; the cooperation of Egyptian energy resource and planning organizations was assured; and arrangements to carry out the cooperative assessment were planned.

Utility of Social Modeling for Proliferation Assessment - Preliminary Findings

International Nuclear Information System (INIS)

Coles, Garill A.; Gastelum, Zoe N.; Brothers, Alan J.; Thompson, Sandra E.

2009-01-01

Often the methodologies for assessing proliferation risk are focused around the inherent vulnerability of nuclear energy systems and associated safeguards. For example an accepted approach involves ways to measure the intrinsic and extrinsic barriers to potential proliferation. This paper describes preliminary investigation into non-traditional use of social and cultural information to improve proliferation assessment and advance the approach to assessing nuclear material diversion. Proliferation resistance assessment, safeguard assessments and related studies typically create technical information about the vulnerability of a nuclear energy system to diversion of nuclear material. The purpose of this research project is to find ways to integrate social information with technical information by explicitly considering the role of culture, groups and/or individuals to factors that impact the possibility of proliferation. When final, this work is expected to describe and demonstrate the utility of social science modeling in proliferation and proliferation risk assessments.

Economic valuation of acidic deposition damages: Preliminary results from the 1985 NAPAP [National Acid Precipitation Assessment Program] damage assessment

International Nuclear Information System (INIS)

Callaway, J.M.; Darwin, R.F.; Nesse, R.J.

1985-01-01

This paper identifies methods used to evaluate the economic damages of acid deposition in the 1985 Damage Assessment being coordinated by the National Acid Precipitation Program. It also presents the preliminary estimates of economic damages for the Assessment. Economic damages are estimated for four effect areas: commercial agriculture and forests, recreational fishing and selected types of materials. In all but the last area, methods are used which incorporate the behavioral responses of individuals and firms or simulated physical damages to resources at risk. The preliminary nature of the estimated damages in each area is emphasized. Over all, the damage estimates should be interpreted with caution. 44 refs., 6 figs., 5 tabs

ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY

Science.gov (United States)

2017-08-01

AFRL-RY-WP-TR-2017-0167 ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY Burhan Bayraktaroglu Devices for Sensing Branch Aerospace...TITLE AND SUBTITLE ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER N/A 6...report summarizes the current status of the Ga2O3 technology based on published results on theoretical electronic structure, materials growth, and

Assessing for Technological Literacy

Science.gov (United States)

Engstrom, Daniel E.

2004-01-01

Designing standards-based assessment is a key component of a quality technology education program. For students to become technologically literate, it is important that the teacher understands how to measure student understandings and abilities in the study of technology. This article is written to help teachers and teacher educators recognize the…

Preliminary feasibility assessment for Earth-to-space electromagnetic (Railgun) launchers

Science.gov (United States)

Rice, E. E.; Miller, L. A.; Earhart, R. W.

1982-01-01

An Earth to space electromagnetic (railgun) launcher (ESRL) for launching material into space was studied. Potential ESRL applications were identified and initially assessed to formulate preliminary system requirements. The potential applications included nuclear waste disposal in space, Earth orbital applications, deep space probe launchers, atmospheric research, and boost of chemical rockets. The ESRL system concept consisted of two separate railgun launcher tubes (one at 20 deg from the horizontal for Earth orbital missions, the other vertical for solar system escape disposal missions) powered by a common power plant. Each 2040 m launcher tube is surrounded by 10,200 homopolar generator/inductor units to transmit the power to the walls. Projectile masses are 6500 kg for Earth orbital missions and 2055 kg for nuclear waste disposal missions. For the Earth orbital missions, the projectile requires a propulsion system, leaving an estimated payload mass of 650 kg. For the nuclear waste disposal in space mission, the high level waste mass was estimated at 250 kg. This preliminary assessment included technical, environmental, and economic analyses.

Presentation of a methodology for measuring social acceptance of three hydrogen storage technologies and preliminary results

Energy Technology Data Exchange (ETDEWEB)

Noirot, I.; Bigay, C. N.

2005-07-01

Hydrogen storage is a key technology for the extensive use of H2 as energy carrier. As none of the current technologies satisfies all of the hydrogen storage attributes required by manufacturers and end users, there is intense research works aiming at developing viable solutions. A broad objective of the StorHy European project is to provide technological storage solutions, which are attractive from an economical, environmental and safety point of view. A specific sub-project is dedicated to the comparison of three different potential storage technologies for transport applications (compressed gas, cryogenic liquid, solid media). This evaluation is carried out in a harmonised way, based on common tools and assessment strategies that could be useful for decision makers and stakeholders. The assessment is achieved in a 'sustainable development' spirit, taking into consideration the technical, environmental, economical, safety and social requirements. The latter ones have newly emerged in such evaluations, based on the Quality Function Deployment (QFD) approach, and would require to be further studied. Hydrogen acceptability studies have been conducted in previous projects. They have been reviewed by LBST in the AcceptH2 project Public acceptance of Hydrogen Transport Technologies : Analysis and comparisons of existing studies (www. accepth2. com - August 2003). During these hydrogen acceptance surveys, mainly fuel cell bus passengers from demonstration projects around the world have been questioned. The work presented in this paper goes further in the methodology refinement as it focuses on the evaluation of hydrogen storage solutions. It proposes a methodological tool for efficient social evaluation of new technologies and associated preliminary results concerning France. In a global approach to sustainable development, the CEA has developed a new methodology to evaluate its current research projects : Multicriteria Analysis for Sustainable Industrial

Preliminary risk assessment of Power Plant Plomin site contaminated by radioactive slag and ash

International Nuclear Information System (INIS)

Skanata, D.; Sinka, D.; Lokner, V.; Schaller, A.

1996-01-01

There is a certain number of radioactively contaminated sites in the Republic of Croatia, one of them being known as Power Plant Plomin site, which contains radioactive slag and ash. Due to a relatively high quantity of the deposited material, as well as relatively high population density of the neighbouring area, it is very important to assess the impact of the site on human health and environment. Using RESRAD computer code and PATHRAE method a preliminary assessment of doses and radiation risks for the workers who spend most of their working day at the pile has been performed. PATHRAE method has also been used for the assessment of radiation risks for the neighbouring population. The assessment is preliminary in its character due to the lack of input data. On the basis of assessment results, recommendations are being given comprising measurements to be taken with a view to coming up with the final risk assessment, as well as protective measures which should be undertaken in the meantime. (author)

SUSTAINABILITY LOGISTICS BASING SCIENCE AND TECHNOLOGY OBJECTIVE DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT

Science.gov (United States)

2018-03-22

BASING SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT by Gregg J. Gildea Paul D. Carpenter Benjamin J...Campbell William F. Harris* Michael A. McCluskey** and José A. Miletti*** *General Dynamics Information Technology Fairfax, VA 22030 **Maneuver...SCIENCE AND TECHNOLOGY OBJECTIVE – DEMONSTRATION; SELECTED TECHNOLOGY ASSESSMENT 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

The Anaclitic-Introjective Depression Assessment: Development and preliminary validity of an observer-rated measure.

Science.gov (United States)

Rost, Felicitas; Luyten, Patrick; Fonagy, Peter

2018-03-01

The two-configurations model developed by Blatt and colleagues offers a comprehensive conceptual and empirical framework for understanding depression. This model suggests that depressed patients struggle, at different developmental levels, with issues related to dependency (anaclitic issues) or self-definition (introjective issues), or a combination of both. This paper reports three studies on the development and preliminary validation of the Anaclitic-Introjective Depression Assessment, an observer-rated assessment tool of impairments in relatedness and self-definition in clinical depression based on the item pool of the Shedler-Westen Assessment Procedure. Study 1 describes the development of the measure using expert consensus rating and Q-methodology. Studies 2 and 3 report the assessment of its psychometric properties, preliminary reliability, and validity in a sample of 128 patients diagnosed with treatment-resistant depression. Four naturally occurring clusters of depressed patients were identified using Q-factor analysis, which, overall, showed meaningful and theoretically expected relationships with anaclitic/introjective prototypes as formulated by experts, as well as with clinical, social, occupational, global, and relational functioning. Taken together, findings reported in this paper provide preliminary evidence for the reliability and validity of the Anaclitic-Introjective Depression Assessment, an observer-rated measure that allows the detection of important nuanced differentiations between and within anaclitic and introjective depression. Copyright © 2017 John Wiley & Sons, Ltd.

Identifying and Assessing Life-Cycle-Related Critical Technology Elements (CTEs) for Technology Readiness Assessments (TRAs)

National Research Council Canada - National Science Library

Mandelbaum, Jay

2006-01-01

.... Because these technologies are not emphasized in the current Technology Readiness Assessment (TRA) process this document is intended to improve the focus on life-cycle-related technologies in TRAs...

History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

Science.gov (United States)

Banta, David; Jonsson, Egon; Childs, Paul

2009-07-01

The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

Establishment of Health Technology Assessment in Iran

Directory of Open Access Journals (Sweden)

Shila Doaee

2012-06-01

Full Text Available Objective: Health Technology Assessment (HTA aims at informing healthcare policymakers, managers and practitioners of the "clinical consequences, but also the economic, ethical, and other social implications of the diffusion and use of a specific procedure or technique on medical practice". So considering the policy-oriented nature of HTA that calls for a close integration into the functioning and governance of health systems the present study focuses on executive processes and function of the HTA office of Iran.Materials and methods: Data of this review study were collected through documented sources and observations from 2007 to 2010.Results: Health Technology Assessment began its activities as a secretariat in the Deputy of Health in 2007 and it continues as a Health Technology Assessment Office at the Management of Health Technology Assessment, Standardization, and Tariff at the Deputy of curative affairs of MOHME in the beginning of 2010.14 Technology of modern medical equipment and 8 pharmaceutical medicine are assessed, Now many of measures for HTA establishment  such as cooperation National Institute of Health Research (NIHR, Holding scientific committee meetings, Establishing  the  Master's degree of  health technology assessment ,Building capacities for health technology assessment through education in major universities of the country.Conclusion: pay attention to health technology assessment, selection and application of proper technologies in the frameworks of policy-making and managerial strategies and make efforts to develop it with the support of the governmental in Iran is necessary.

Preliminary Mineral Resource Assessment of Selected Mineral Deposit Types in Afghanistan

Science.gov (United States)

Ludington, Steve; Orris, Greta J.; Bolm, Karen S.; Peters, Stephen G.; ,

2007-01-01

INTRODUCTION Wise decision-making and management of natural resources depend upon credible and reliable scientific information about the occurrence, distribution, quantity and quality of a country's resource base. Economic development decisions by governments require such information to be part of a Mineral Resource Assessment. Such Mineral Assessments are also useful to private citizens and international investors, consultants, and companies prior to entry and investment in a country. Assessments can also be used to help evaluate the economic risks and impact on the natural environment associated with development of resources. In February 2002, at the request of the Department of State and the then U.S. Ambassador to Afghanistan (Robert P. Finn), the U.S. Geological Survey (USGS) prepared a detailed proposal addressing natural resources issues critical to the reconstruction of Afghanistan. The proposal was refined and updated in December 2003 and was presented as a 5-year work plan to USAID-Kabul in February 2004. USAID-Kabul currently funds this plan and this report presents a part of the preliminary results obligated for fiscal year 2006. A final Preliminary Assessment of the Non Fuel Mineral Resource of Afghanistan will be completed and delivered at the end of fiscal year 2007. Afghanistan has abundant metallic and non-metallic resources, but the potential resources have never been systematically assessed using modern methods. Much of the existing mineral information for Afghanistan was gathered during the 1950s and continued in the late 1980s until the departure of the geologic advisors from the Soviet Union. During this period, there were many mineral-related activities centered on systematic geologic mapping of the country, collection of geochemical and rock samples, implementation of airborne geophysical surveys, and exploration focused on the discovery of large mineral deposits. Many reports, maps, charts, and tables were produced at that time. Some of

AVLIS Production Plant Preliminary Quality Assurance Plan and Assessment

International Nuclear Information System (INIS)

1984-01-01

This preliminary Quality Assurance Plan and Assessment establishes the Quality Assurance requirements for the AVLIS Production Plant Project. The Quality Assurance Plan defines the management approach, organization, interfaces, and controls that will be used in order to provide adequate confidence that the AVLIS Production Plant design, procurement, construction, fabrication, installation, start-up, and operation are accomplished within established goals and objectives. The Quality Assurance Program defined in this document includes a system for assessing those elements of the project whose failure would have a significant impact on safety, environment, schedule, cost, or overall plant objectives. As elements of the project are assessed, classifications are provided to establish and assure that special actions are defined which will eliminate or reduce the probability of occurrence or control the consequences of failure. 8 figures, 18 tables

Superconducting Technology Assessment

National Research Council Canada - National Science Library

2005-01-01

This Superconducting Technology Assessment (STA) has been conducted by the National Security Agency to address the fundamental question of a potential replacement for silicon complementary metal oxide semiconductor (CMOS...

Technologies Assessing Limb Bradykinesia in Parkinson's Disease.

Science.gov (United States)

Hasan, Hasan; Athauda, Dilan S; Foltynie, Thomas; Noyce, Alastair J

2017-01-01

The MDS-UPDRS (Movement Disorders Society - Unified Parkinson's Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development.

Preliminary engineering assessment of treatment alternatives for groundwater from the Hanford 200 Area 200-BP-5 plumes

International Nuclear Information System (INIS)

1996-05-01

This report presents the results of the Preliminary Engineering Assessment of Treatment Alternatives (PEATA), an engineering evaluation of potential treatment alternatives for groundwater extracted from the 200-BP-5 Area's 216-BY Cribs and 216-B-5 Reverse Well plumes. The primary objective of the PEATA was to identify treatment technologies that are worth further consideration (i.e., treatability testing or a more refined engineering evaluation). It will also provide a basis for evaluating the results of the treatability testing that is currently being conducted on the presumptive remedy of ion exchange with disposal of spent resin and will serve as a guide for selection of other technologies for additional testing. Because there are little data or past experience with groundwater similar to the BY-Crib and B-5 Reverse Well Plumes, treatment efficiencies cannot be predicted with certainty and rigorous treatment system designs and costs cannot be developed. This applies to all alternatives, including the presumptive remedy of ion exchange. The approach for this study was to develop conceptual designs and approximate costs for the treatment technologies that were most likely to be effective on the BY-Crib and B-5 Reverse Well groundwater

Preliminary Ecotoxicity and Biodegradability Assessment of Metalworking Fluids

Science.gov (United States)

Gerulová, Kristína; Amcha, Peter; Filická, Slávka

2010-01-01

The main aim of this study was to evaluate the potential of activated sludge from sewage treatment plant to degrade selected MWFs (ecotoxicity to bacterial consortium) and to evaluate the ecotoxicity by Lemna minor-higher plant. After evaluating the ecotoxicity, biodegradations rate with activated sludge was assessed on the basis of COD measurement. Preliminary study of measuring the ecotoxicity according to OECD 221 by Lemna minor shows effective concentration of Emulzin H at the rate of 81.6 mg l-1, for Ecocool 82.9 mg l-1, for BC 25 about 99.3 mg l-1, and for Dasnobor about 97.3 mg l-1. Preliminary study of measuring the ecotoxicity by bacterial consortium according to OECD 209 (STN EN ISO 8192) shows effective concentration of Blasocut BC 25 at the rate 227.4 mg l-1. According to OECD 302B, the biodegradations level of Emulzin H, Ecocool and BC 25 achieved 80% in 10 days. It can be stated that these MWFs have potential to ultimate degradation, but the statement has to be confirmed by a biodegradability test with other parameters than COD, which exhibits some disadvantages in testing O/W emulsions.

Development and preliminary reliability of a multitasking assessment for executive functioning after concussion.

Science.gov (United States)

Smith, Laurel B; Radomski, Mary Vining; Davidson, Leslie Freeman; Finkelstein, Marsha; Weightman, Margaret M; McCulloch, Karen L; Scherer, Matthew R

2014-01-01

OBJECTIVES. Executive functioning deficits may result from concussion. The Charge of Quarters (CQ) Duty Task is a multitask assessment designed to assess executive functioning in servicemembers after concussion. In this article, we discuss the rationale and process used in the development of the CQ Duty Task and present pilot data from the preliminary evaluation of interrater reliability (IRR). METHOD. Three evaluators observed as 12 healthy participants performed the CQ Duty Task and measured performance using various metrics. Intraclass correlation coefficient (ICC) quantified IRR. RESULTS. The ICC for task completion was .94. ICCs for other assessment metrics were variable. CONCLUSION. Preliminary IRR data for the CQ Duty Task are encouraging, but further investigation is needed to improve IRR in some domains. Lessons learned in the development of the CQ Duty Task could benefit future test development efforts with populations other than the military. Copyright © 2014 by the American Occupational Therapy Association, Inc.

Information Technology Resources Assessment

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

Technological and life cycle assessment of organics processing odour control technologies

Energy Technology Data Exchange (ETDEWEB)

Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

2015-09-15

As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

Preliminary assessment report for Kent National Guard Facility (Installation 53065), 24410 Military Road, Kent, Washington

International Nuclear Information System (INIS)

Ketels, P.; Aggarwal, P.; Rose, C.M.

1993-08-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Washington Army National Guard property in Kent, Washington. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment

Hellsgate Winter Range : Wildlife Mitigation Project. Preliminary Environmental Assessment.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1995-01-01

The Bonneville Power Administration proposes funding the Hellsgate Winter Range Wildlife Mitigation Project in cooperation with the Colville Convederated Tribes and Bureau of Indian Affairs. This Preliminary Environmental Assessment examines the potential environmental effects of acquiring and managing property for wildlife and wildlife habitat within a large project area. The Propose action is intended to meet the need for mitigation of wildlife and wild life habitat that was adversely affected by the construction of Grand Coulee and Chief Joseph Dams and their reservoirs.

Preliminary assessment report for Fort William Henry Harrison, Montana Army National Guard, Helena, Montana

International Nuclear Information System (INIS)

DuWaldt, J.; Meyer, T.

1993-07-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at a Montana Army National Guard (MTARNG) property near Helena, Montana. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Fort William Henry Harrison property, requirements of the Department of Defense Installation Restoration Program

Trust, technology affordances and feedback in peer assessments in MOOCs

DEFF Research Database (Denmark)

Ringtved, Ulla Lunde; Milligan, Sandra

2015-01-01

The preliminary findings in the automated peer assessments in the assessment framework in a MOOC are discussed here. We discuss whether,the assessment frame work underpins pedagogical approaches including feedback and collaboration between the participants. The empirical foundation is research...... on data from a recent MOOC from Melbourne University titled “Teaching and assessing 21st century skills”....

Comments on SKB's SFL 3-5 preliminary performance assessment

International Nuclear Information System (INIS)

Wilmot, R.D.; Crawford, M.B.

2000-01-01

Recently introduced regulations in Sweden have established an individual risk criterion ( -6 per year) for the long-term performance of repositories for the disposal of radioactive wastes. SKB has not focused its assessment of SFL 3-5 on demonstrating compliance with this regulation. Instead, SKB has calculated individual dose and provided a comparison with an annual individual dose of 14 iSv (derived from the risk criteria using the ICRP's dose-risk conversion factor of 0.073 per Sv). The justification of this approach is that probabilities do not need to be determined if doses are less than the dose equivalent to the risk criterion. However, there is insufficient information regarding uncertainty provided in the documentation of the SFL 3-5 assessment to determine whether this approach is reasonable. SKB's parallel assessment of a repository for spent fuel using the KBS-3 concept (SR 97) accounts for uncertainty by specifying a 'reasonable' and a 'pessimistic' value for uncertain parameters in the assessment calculations. Although there are problems with the way probabilities have been assigned to these values, this approach does indicate where there are significant uncertainties. The SFL 3-5 PA does not include a structured approach to defining uncertainty, although a number of assumptions and parameter values are stated to be conservative. As a preliminary assessment, there is insufficient information to identify key uncertainties or sensitivities, or to determine where further work should be focused. Any assessment requires the use of expert judgement to determine how the assessment is conducted, what modelling approach to use, what features, events and processes (FEPs) could potentially affect the disposal system, which FEPs should be included in the conceptual models, and which scenarios should be assessed. Judgements are also required in determining how to parameterize the models, and this may extend to formal expert elicitation for particular parameter

Technology assessment of solar energy utilization

Science.gov (United States)

Jaeger, F.

1985-11-01

The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

Preliminary risk assessment for nuclear waste disposal in space. Volume I. Executive summary of technical report

International Nuclear Information System (INIS)

Rice, E.E.; Denning, R.S.; Friedlander, A.L.

1982-01-01

Three major conclusions come from this preliminary risk assessment of nuclear waste disposal in space. Preliminary estimates of space disposal risk are low, even with the estimated uncertainty bounds. If calculated mined geologic repository (MGR) release risks remain low, and the EPA requirements continue to be met, then no additional space disposal study effort is warranted. If risks perceived by the public are significant in the acceptance of mined geologic repositories, then consideration of space disposal as an MGR complement is warranted. As a result of this study, the following recommendations are made to NASA and the US DOE: During the continued evaluation of the mined geologic repository risk over the years ahead by DOE, if any significant increase in the calculated health risk is predicted for the MGR, then space disposal should be reevaluated at that time. The risks perceived by the public for the MGR should be evaluated on a broad basis by an independent organization to evaluate acceptance. If, in the future, MGR risks are found to be significant due to some presently unknown technical or social factor, and space disposal is selected as an alternative that may be useful in mitigating the risks, then the following space disposal study activities are recommended: improvement in chemical processing technology for wastes; payload accident response analysis; risk uncertainty analysis for both MGR and space disposal; health risk modeling that includes pathway and dose estimates; space disposal cost modeling; assessment of space disposal perceived (by public) risk benefit; and space systems analysis supporting risk and cost modeling

Preliminary regulatory assessment of nuclear power plants vulnerabilities

International Nuclear Information System (INIS)

Kostadinov, V.; Petelin, S.

2004-01-01

Preliminary attempts to develop models for nuclear regulatory vulnerability assessment of nuclear power plants are presented. Development of the philosophy and computer tools could be new and important insight for management of nuclear operators and nuclear regulatory bodies who face difficult questions about how to assess the vulnerability of nuclear power plants and other nuclear facilities to external and internal threats. In the situation where different and hidden threat sources are dispersed throughout the world, the assessment of security and safe operation of nuclear power plants is very important. Capability to evaluate plant vulnerability to different kinds of threats, like human and natural occurrences and terrorist attacks and preparation of emergency response plans and estimation of costs are of vital importance for assurance of national security. On the basis of such vital insights, nuclear operators and nuclear regulatory bodies could plan and optimise changes in oversight procedures, organisations, equipment, hardware and software to reduce risks taking into account security and safety of nuclear power plants operation, budget, manpower, and other limitations. Initial qualitative estimations of adapted assessments for nuclear applications are shortly presented. (author)

Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

Science.gov (United States)

Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

2015-11-30

Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

A preliminary social and economic assessment of the Basalt Waste Isolation Project

International Nuclear Information System (INIS)

Cluett, C.; Bolton, P.; York, K.; Wood, M.; Radford, L.

1981-07-01

This report provides a preliminary assessment of the social and economic impacts that could be caused by the construction and operation of a nuclear waste repository on the Hanford Site near Richland, Washington. This assessment involved assembling a comprehensive data base for the local Tri-Cities impact area and the surrounding region, establishing a network of local and regional contacts, making preliminary judgments about potential social impacts caused by the proposed repository, and recommending further research. This report concludes that growth effects under the anticipated work force scenario are expected to be relatively minor. With a strong public involvement program on the part of the project developers, including an ongoing dialogue with local and regional planners, potential socio-economic impacts can be anticipated and managed effectively. Specific recommendations are made for filling gaps in the available data, exploring key issues in more detail, and improving the analysis of social impacts. The report was prepared by the Battelle-Human Affairs Research Center in 1980 and 1981

Preliminary assessment report for Fort Custer Training Center, Installation 26035, Augusta, Michigan

International Nuclear Information System (INIS)

Flaim, S.; Krokosz, M.

1993-08-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Michigan Army National Guard property near Augusta, Michigan. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Fort Custer Training Center, phase I of the Department of Defense Installation Restoration Program. The environmentally significant operations associated with the property are (1) storage of hazardous materials and hazardous waste, (2) storage and dispensing of fuel, (3) washing of vehicles and equipment, and (4) weapons training ranges that may have accumulated lead

A preliminary investigation for application of an advanced x-ray diffraction analyzer to in-process texture assessment of aluminum alloy sheet

International Nuclear Information System (INIS)

Ruud, C.O.; Snoha, D.J.

1989-01-01

The objective of this preliminary investigation was to assess the possibility of the use of rapid x-ray diffraction technology to nondestructively distinguish various texture conditions of aluminum can stock. Twelve samples of aluminum alloy can stock sheet were supplied by two manufacturers. The samples varied in thickness from 0.128 to 0.0124 inch and in texture from 2.8% to 11.0% as measured by a cup drawing earing test. The results for Cu K-alpha and Cr K-alpha radiation on suites of aluminum can stock samples from two manufacturers, in both hot rolled can stock precursor gages of 0.80 and 0.125 inch and in the final gage, show there is a good correlation between the peak intensity area function and the texture. These preliminary results provide an indication that the instrumentation and techniques applied could be optimized and refined for application to rapid, in-process nondestructive inspection of rolled aluminum can stock

ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

OpenAIRE

Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

2016-01-01

We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

Preliminary Assessment of the Flow of Used Electronics, In ...

Science.gov (United States)

Electronic waste (e-waste) is the largest growing municipal waste stream in the United States. The improper disposal of e-waste has environmental, economic, and social impacts, thus there is a need for sustainable stewardship of electronics. EPA/ORD has been working to improve our understanding of the quantity and flow of electronic devices from initial purchase to final disposition. Understanding the pathways of used electronics from the consumer to their final disposition would provide insight to decision makers about their impacts and support efforts to encourage improvements in policy, technology, and beneficial use. This report is the first stage of study of EPA/ORD's efforts to understand the flows of used electronics and e-waste by reviewing the regulatory programs for the selected states and identifying the key lessons learned and best practices that have emerged since their inception. Additionally, a proof-of-concept e-waste flow model has been developed to provide estimates of the quantity of e-waste generated annually at the national level, as well as for selected states. This report documents a preliminary assessment of available data and development of the model that can be used as a starting point to estimate domestic flows of used electronics from generation, to collection and reuse, to final disposition. The electronics waste flow model can estimate the amount of electronic products entering the EOL management phase based on unit sales dat

Institutionalising health technology assessment: establishing the Medical Technology Assessment Board in India.

Science.gov (United States)

Downey, Laura E; Mehndiratta, Abha; Grover, Ashoo; Gauba, Vijay; Sheikh, Kabir; Prinja, Shankar; Singh, Ravinder; Cluzeau, Francoise A; Dabak, Saudamini; Teerawattananon, Yot; Kumar, Sanjiv; Swaminathan, Soumya

2017-01-01

India is at crossroads with a commitment by the government to universal health coverage (UHC), driving efficiency and tackling waste across the public healthcare sector. Health technology assessment (HTA) is an important policy reform that can assist policy-makers to tackle inequities and inefficiencies by improving the way in which health resources are allocated towards cost-effective, appropriate and feasible interventions. The equitable and efficient distribution of health budget resources, as well as timely uptake of good value technologies, are critical to strengthen the Indian healthcare system. The government of India is set to establish a Medical Technology Assessment Board to evaluate existing and new health technologies in India, assist choices between comparable technologies for adoption by the healthcare system and improve the way in which priorities for health are set. This initiative aims to introduce a more transparent, inclusive, fair and evidence-based process by which decisions regarding the allocation of health resources are made in India towards the ultimate goal of UHC. In this analysis article, we report on plans and progress of the government of India for the institutionalisation of HTA in the country. Where India is home to one-sixth of the global population, improving the health services that the population receives will have a resounding impact not only for India but also for global health.

78 FR 14540 - Chlorpyrifos Registration Review; Preliminary Volatilization Assessment; Extension of Comment Period

Science.gov (United States)

2013-03-06

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2008-0850; FRL-9380-7] Chlorpyrifos Registration... Federal Register issue of February 6, 2013, concerning Chlorpyrifos Registration Review; Preliminary... volatilization assessment for the registration review of chlorpyrifos. EPA received requests from several...

Preliminary environmental assessment for the satellite power system (SPS)

Energy Technology Data Exchange (ETDEWEB)

1978-10-01

A preliminary assessment of the impact of the Satellite Power System (SPS) on the environment is presented. Information that has appeared in documents referenced herein is integrated and assimilated. The state-of-knowledge as perceived from recently completed DOE-sponsored studies is disclosed, and prospective research and study programs that can advance the state-of-knowledge and provide an expanded data base for use in an assessment planned for 1980 are defined. Alternatives for research that may be implemented in order to achieve this advancement are also discussed in order that a plan can be selected which will be consistent with the fiscal and time constraints on the SPS Environmental Assessment Program. Health and ecological effects of microwave radiation, nonmicrowave effects on health and the environment (terrestrial operations and space operations), effects on the atmosphere, and effects on communications systems are examined in detail. (WHK)

Fukushima. A preliminary assessment in July 2011; Fukushima. Eine vorlaeufige Bilanz im Juli 2011

Energy Technology Data Exchange (ETDEWEB)

Michel, Rolf

2011-07-01

Four months after the reactor accidents in Fukushima Daiichi a preliminary assessment of the accident sequence vents is performed based on the available incomplete information. The following topics are discussed: initiating events and accident sequences, radioactive materials release and dispersion, fundamentals on radiation exposure following the accident in the nuclear power plant Fukushima Daiichi, contamination of food stuff, fission product release into the Pacific Ocean, source tern and external radiation exposure in the first year, preliminary radiological assessment, radiological situation throughout the different accident phases (radioactive cloud and fallout, late phase), estimation of radiation exposure in the first year due to decay of short-lived radionuclides based on the state end of July 2011, comparison of the reactor accidents in Chernobyl and Fukushima Daiichi.

A preliminary assessment of the true morels (Morchella) in Newfoundland and Labrador

Science.gov (United States)

A preliminary assessment of true morels (Morchella) from Newfoundland and Labrador (NL) was obtained by using DNA sequence data from portions of three genes to identify 20 collections from Newfoundland and one from a remote location in Labrador. To place this work in a broader context, data on 25 co...

Assessment of the possibility of utilisation of used ceramic moulds originated from the investment casting technology

Directory of Open Access Journals (Sweden)

M. Holtzer

2009-04-01

Full Text Available Review of wastes generated by investment casting technology and discussion on possibilities of disposal of the largest quantity waste from this technology - used ceramic mould is presented in the paper. Preliminary examinations of disintegration process of used ceramic mould conducted in various testing conditions were performed in the frame of presented research. Applied system of disintegration doesn’twarrant obtained material to be suitable for reuse in production of ceramic moulds. Investigations of the inter-phase boundary: ceramicmould-casting were performed to examine environmental harmfulness of used ceramic moulds. Additionally ecologic assessment of spentmoulds by means of it’s elution in the aspect of qualifying possibilities of it’s disposal were performed. Gained results qualify the waste from ceramic mould to storage in deposits for neutral wastes.

Technology Assessment Need: Review on Attractiveness and Competitiveness

Science.gov (United States)

Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

2017-06-01

Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

Science.gov (United States)

Draborg, Eva; Andersen, Christian Kronborg

2006-01-01

Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

PACS/IMAC technology assessment

OpenAIRE

Schilling, Ronald B.

1997-01-01

According to Peter Ogle of Digital Imaging (San Francisco, CA), “Radiologists should help identify common values for the use of information technology in medicine.” Achieving a set of common values often requires a framework for organizing the thought process involved. That is the focus of this article in addressing the subject of picture archiving and communication system (PACS) technology assessment.

Criteria for safety-related nuclear plant operator actions: a preliminary assessment of available data

International Nuclear Information System (INIS)

Haas, P.M.; Bott, T.F.

1980-01-01

In the US, an effort has been underway for a number of years to develop a design standard to define when required manual operator action can be accepted as part of a nuclear plant design basis. Insufficient data are available to provide quantitative guidelines for the standard. To provide the necessary data base to support such standards and the necessary quantitative assessment of operator reliability, the US Nuclear Regulatory Commission is sponsoring a study at Oak National Laboratory to develop the data base. A preliminary assessment completed in April, 1979 concluded that sufficient data from US operating experience did not exist to provide an adequate data base. A program of research using full-scope nuclear plant simulators and results that are correlated to field data was suggested. That program was recently initiated. The approach, results and conclusions of the preliminary assessment are reviewed and the planned research program of simulator studies is summarised. (author)

Technologies Assessing Limb Bradykinesia in Parkinson’s Disease

Science.gov (United States)

Hasan, Hasan; Athauda, Dilan S.; Foltynie, Thomas; Noyce, Alastair J.

2017-01-01

Background: The MDS-UPDRS (Movement Disorders Society – Unified Parkinson’s Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. Objective: To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. Methods: A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. Results: 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Conclusion: Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development. PMID:28222539

An Early Years Toolbox for Assessing Early Executive Function, Language, Self-Regulation, and Social Development: Validity, Reliability, and Preliminary Norms.

Science.gov (United States)

Howard, Steven J; Melhuish, Edward

2017-06-01

Several methods of assessing executive function (EF), self-regulation, language development, and social development in young children have been developed over previous decades. Yet new technologies make available methods of assessment not previously considered. In resolving conceptual and pragmatic limitations of existing tools, the Early Years Toolbox (EYT) offers substantial advantages for early assessment of language, EF, self-regulation, and social development. In the current study, results of our large-scale administration of this toolbox to 1,764 preschool and early primary school students indicated very good reliability, convergent validity with existing measures, and developmental sensitivity. Results were also suggestive of better capture of children's emerging abilities relative to comparison measures. Preliminary norms are presented, showing a clear developmental trajectory across half-year age groups. The accessibility of the EYT, as well as its advantages over existing measures, offers considerably enhanced opportunities for objective measurement of young children's abilities to enable research and educational applications.

Health technology assessment. Evaluation of biomedical innovative technologies.

Science.gov (United States)

Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

2010-01-01

This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

Science.gov (United States)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

Assessment of regulations set up under public law concerning questions of safety technology

International Nuclear Information System (INIS)

Steiff, A.; Althaus, W.; Dietz, B.; Gross, H.J.; Stasiczek, M.; Salzwedel, J.; Reinhardt, M.

1992-02-01

A goal of the preliminary study was to assess the need for a data-processing system, to analyze the goals of such a system, to conceptualize it and examine possibilities for implementing it and to do a cost-benefit analysis of it. It serves as a means of assistance for - licensing and supervisory authorities, - the manufacturers and operators of plants, - the control institutions, - the communes, the governments of the Laender and the federal government, - trade associations and professional associations, - employers' organizations and employees' organizations in their efforts to solve problems and carry out tasks regarding safety technology. Such problems arise during the planning, construction, operation, alteration, closure and removal of plants as well as during the transport and storing of materials and goods. (orig./DG) [de

Preliminary melter performance assessment report

International Nuclear Information System (INIS)

Elliott, M.L.; Eyler, L.L.; Mahoney, L.A.; Cooper, M.F.; Whitney, L.D.; Shafer, P.J.

1994-08-01

The Melter Performance Assessment activity, a component of the Pacific Northwest Laboratory's (PNL) Vitrification Technology Development (PVTD) effort, was designed to determine the impact of noble metals on the operational life of the reference Hanford Waste Vitrification Plant (HWVP) melter. The melter performance assessment consisted of several activities, including a literature review of all work done with noble metals in glass, gradient furnace testing to study the behavior of noble metals during the melting process, research-scale and engineering-scale melter testing to evaluate effects of noble metals on melter operation, and computer modeling that used the experimental data to predict effects of noble metals on the full-scale melter. Feed used in these tests simulated neutralized current acid waste (NCAW) feed. This report summarizes the results of the melter performance assessment and predicts the lifetime of the HWVP melter. It should be noted that this work was conducted before the recent Tri-Party Agreement changes, so the reference melter referred to here is the Defense Waste Processing Facility (DWPF) melter design

Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

Energy Technology Data Exchange (ETDEWEB)

Yeh, B.

2011-03-01

This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

International Nuclear Information System (INIS)

Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

2005-01-01

A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of technology

Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

Energy Technology Data Exchange (ETDEWEB)

Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

2005-10-03

A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of

20 Years of Technology and Language Assessment in "Language Learning & Technology"

Science.gov (United States)

Chapelle, Carol A.; Voss, Erik

2016-01-01

This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

Guidance for performing preliminary assessments under CERCLA

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-09-01

EPA headquarters and a national site assessment workgroup produced this guidance for Regional, State, and contractor staff who manage or perform preliminary assessments (PAs). EPA has focused this guidance on the types of sites and site conditions most commonly encountered. The PA approach described in this guidance is generally applicable to a wide variety of sites. However, because of the variability among sites, the amount of information available, and the level of investigative effort required, it is not possible to provide guidance that is equally applicable to all sites. PA investigators should recognize this and be aware that variation from this guidance may be necessary for some sites, particularly for PAs performed at Federal facilities, PAs conducted under EPA`s Environmental Priorities Initiative (EPI), and PAs at sites that have previously been extensively investigated by EPA or others. The purpose of this guidance is to provide instructions for conducting a PA and reporting results. This guidance discusses the information required to evaluate a site and how to obtain it, how to score a site, and reporting requirements. This document also provides guidelines and instruction on PA evaluation, scoring, and the use of standard PA scoresheets. The overall goal of this guidance is to assist PA investigators in conducting high-quality assessments that result in correct site screening or further action recommendations on a nationally consistent basis.

Social Shaping in Danish Technology Assessment

DEFF Research Database (Denmark)

Hansen, Anne Grethe; Clausen, Christian

2003-01-01

The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social an...... in these projects contributed to new insights into the processes of technological change and thus to policy formulation. The social shaping perspective and technology assessment experiences are suggested as important guides to future technology strategies....... and political action for technology change. The authors of this article suggest that the social shaping perspective draws on lessons from technology assessments of earlier decades, lessons about the role of technology debate, participation and democratic control. We suggest that these are important......The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social...

A preliminary assessment of radiation effects on American Flagfish

Energy Technology Data Exchange (ETDEWEB)

Tzivaki, M.; Waller, E., E-mail: margarita.tzivaki@uoit.ca [University of Ontario Institute of Technology, Oshawa, ON (Canada)

2015-07-01

In order to add to the knowledge base of radiation effects on non-human biota, it is important to define benchmark values for different species. An experimental set-up was designed to investigate effects from irradiation with Cs-137 to American Flagfish. Preliminary experiments to assess the suitability of the methodology were conducted by exposing Flagfish eggs to 44 h of ionizing radiation. The subsequent observation of the developing fry showed no effect on hatching. However, the mortality and observed vertebral malformations were increased with increasing absorbed dose which is suspected to be a result of developmental defects in the embryonic stage. (author)

Preliminary bioelectrical impedance analysis (BIA) equation for body composition assessment in young females from Colombia

International Nuclear Information System (INIS)

Caicedo, J C; González-Correa, C H; González-Correa, C A

2013-01-01

A previous study showed that reported BIA equations for body composition are not suitable for Colombian population. The purpose of this study was to develop and validate a preliminary BIA equation for body composition assessment in young females from Colombia, using hydrodensitometry as reference method. A sample of 30 young females was evaluated. Inclusion and exclusion criteria were defined to minimize the variability of BIA. Height, weight, BIA, residual lung volume (RV) and underwater weight (UWW) were measured. A preliminary BIA equation was developed (r 2 = 0.72, SEE = 2.48 kg) by stepwise multiple regression with fat-free mass (FFM) as dependent variable and weight, height and impedance measurements as independent variables. The quality of regression was evaluated and a cross-validation against 50% of sample confirmed that results obtained with the preliminary BIA equation is interchangeable with results obtained with hydrodensitometry (r 2 = 0.84, SEE = 2.62 kg). The preliminary BIA equation can be used for body composition assessment in young females from Colombia until a definitive equation is developed. The next step will be increasing the sample, including a second reference method, as deuterium oxide dilution (D 2 O), and using multi-frequency BIA (MF-BIA). It would also be desirable to develop equations for males and other ethnic groups in Colombia.

Preliminary assessment report for Redmond Army National Guard Facility, Installation 53120, Redmond, Washington

International Nuclear Information System (INIS)

Ketels, P.; Aggarwal, P.

1993-08-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Washington Army National Guard (WAARNG) property in Redmond, Washington. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Redmond ARNG property, Phase I of the Department of Defense Installation Restoration Program. The environmentally significant operations (ESOs) associated with the property are (1) supply/storage of hazardous materials, (2) weapons cleaning, (3) the underground storage tanks (USTs), and (4) the use of herbicides. These ESOs are no longer active because of the closure of OMS 10 activities in 1988

Static Aeroelastic Deformation Effects in Preliminary Wind-tunnel Tests of Silent Supersonic Technology Demonstrator

OpenAIRE

Makino, Yoshikazu; Ohira, Keisuke; Makimoto, Takuya; Mitomo, Toshiteru; 牧野, 好和; 大平, 啓介; 牧本, 卓也; 三友, 俊輝

2011-01-01

Effects of static aeroelastic deformation of a wind-tunnel test model on the aerodynamic characteristics are discussed in wind-tunnel tests in the preliminary design phase of the silent supersonic technology demonstrator (S3TD). The static aeroelastic deformation of the main wing is estimated for JAXA 2m x 2m transonic wind-tunnel and 1m x 1m supersonic wind-tunnel by a finite element method (FEM) structural analysis in which its structural model is tuned with the model deformation calibratio...

Preliminary assessment of risk of ozone impacts to maize (Zea mays) in Southern Africa

CSIR Research Space (South Africa)

Van Tienhoven, AM

2006-03-01

Full Text Available Surface ozone concentrations in southern Africa exceed air quality guidelines set to protect agricultural crops. This paper addresses a knowledge gap by performing a preliminary assessment of potential ozone impacts on vegetation in southern African...

Verification study on technology for preliminary investigation for HLW geological disposal. Part 2. Verification of surface geophysical prospecting through establishing site descriptive models

International Nuclear Information System (INIS)

Kondo, Hirofumi; Suzuki, Koichi; Hasegawa, Takuma; Goto, Keiichiro; Yoshimura, Kimitaka; Muramoto, Shigenori

2012-01-01

The Yokosuka demonstration and validation project using Yokosuka CRIEPI site has been conducted since FY 2006 as a cooperative research between NUMO (Nuclear Waste Management Organization of Japan) and CRIEPI. The objectives of this project are to examine and to refine the basic methodology of the investigation and assessment of properties of geological environment in the stage of Preliminary Investigation for HLW geological disposal. Within Preliminary Investigation technologies, surface geophysical prospecting is an important means of obtaining information from deep geological environment for planning borehole surveys. In FY 2010, both seismic prospecting (seismic reflection and vertical seismic profiling methods) for obtaining information about geological structure and electromagnetic prospecting (magneto-telluric and time domain electromagnetic methods) for obtaining information about resistivity structure reflecting the distribution of salt water/fresh water boundary to a depth of over several hundred meters were conducted in the Yokosuka CRIEPI site. Through these surveys, the contribution of geophysical prospecting methods in the surface survey stage to improving the reliability of site descriptive models was confirmed. (author)

Designing learning apparatus to promote twelfth grade students’ understanding of digital technology concept: A preliminary studies

Science.gov (United States)

Marlius; Kaniawati, I.; Feranie, S.

2018-05-01

A preliminary learning design using relay to promote twelfth grade student’s understanding of logic gates concept is implemented to see how well it’s to adopted by six high school students, three male students and three female students of twelfth grade. This learning design is considered for next learning of digital technology concept i.e. data digital transmition and analog. This work is a preliminary study to design the learning for large class. So far just a few researches designing learning design related to digital technology with relay. It may due to this concept inserted in Indonesian twelfth grade curriculum recently. This analysis is focus on student difficulties trough video analysis to learn the concept. Based on our analysis, the recommended thing for redesigning learning is: students understand first about symbols and electrical circuits; the Student Worksheet is made in more detail on the assembly steps to the project board; mark with symbols at points in certain places in the circuit for easy assembly; assembly using relays by students is enough until is the NOT’s logic gates and the others that have been assembled so that effective time. The design of learning using relays can make the relay a liaison between the abstract on the digital with the real thing of it, especially in the circuit of symbols and real circuits. Besides it is expected to also enrich the ability of teachers in classroom learning about digital technology.

Preliminary Performance Assessment for Disposal of APT and CLWR/TEF Wastes at SRS

International Nuclear Information System (INIS)

Wilhite, E.L.

1998-01-01

This section provides the descriptive information for understanding the analyses presented in this preliminary performance assessment. This section addresses the approach taken in the PA, provides a general description of the Savannah River Site E-Area low-level waste facility, and discusses the performance criteria used for evaluating performance

76 FR 52945 - Chlorpyrifos Registration Review; Preliminary Human Health Risk Assessment; Extension of Comment...

Science.gov (United States)

2011-08-24

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2008-0850; FRL-8886-6] Chlorpyrifos Registration... chlorpyrifos registration review; preliminary human health risk assessment. This document extends the comment... . SUPPLEMENTARY INFORMATION: This document extends the public comment period for the chlorpyrifos reregistration...

Criteria for safety related nuclear plant operator actions: a preliminary assessment of available data

International Nuclear Information System (INIS)

Haas, P.M.; Bott, T.F.

1982-01-01

The need for a quantitative data base on the reliability of nuclear power plant operators has long been recognised by human factors and reliability analysts, and the great need for further assessment of operator performance under accident conditions has been dramatically emphasised by the incident at Three Mile Island-2. In the US, an effort has been under way for a number of years to develop a design standard to define when required manual operator action can be accepted as part of a nuclear plant design basis. To provide the necessary data base to support such standards and the necessary quantitative assessment of operator reliability, the US Nuclear Regulatory Commission is sponsoring a study at Oak Ridge National Laboratory to develop the data base. A preliminary assessment, completed in April 1979, concluded that sufficient data from US operating experience did not exist to provide an adequate data base. A programme of research using full-scope nuclear plant simulators and results that are correlated to field data was suggested. That programme was recently initiated. This paper reviews the approach, results and conclusions of the preliminary assessment and summarises the planned research programme of simulator studies. (author)

Technology needs assessment for DOE environmental restoration programs

International Nuclear Information System (INIS)

Duray, J.R.; Carlson, T.J.; Carpenter, C.E.; Cummins, L.E.; Daub, G.J.

1992-01-01

The 'Technology Needs Assessment Final Report' describes current and planned environmental restoration activity, identifies technologies intended to be used or under consideration, and ranks technology deficiencies in the U.S. Department of Energy's environmental restoration program. Included in the ranking are treatment technologies, characterization technologies, and non-technology issues that affect environmental restoration. Data used for the assessment was gathered during interviews in the spring of 1991 with DOE site personnel responsible for the environmental restoration work. (author)

Assessment of patient experience with unilateral vocal fold immobility: a preliminary study.

Science.gov (United States)

Francis, David O; McKiever, Monique E; Garrett, C Gaelyn; Jacobson, Barbara; Penson, David F

2014-09-01

Systematically moving toward patient-centered care for unilateral vocal fold immobility (UVFI) requires comprehensive understanding of the variability of actual patient experiences. This rigorous qualitative study assesses UVFI-related disability and proposes a preliminary taxonomy of UVFI patient experience. (1) Semistructured interviews and (2) taxonomy development. Consecutive UVFI patients presenting July to September, 2012, prospectively underwent open-ended interviews investigating how UVFI affected their quality of life (QOL) and had caused disability. Comments reported by >20% were synthesized into axes based on content similarity. Variables were arranged into a preliminary taxonomy of UVFI patient experience, which was evaluated for four attributes of face validity. The majority of 39 patients had "extensive" baseline voice use (56%) and an iatrogenic etiology (62%). Taxonomy of patient experience included three main axes of symptomatic classification: (1) voice, (2) swallowing, and (3) breathing-all with intrinsic (physical and emotional) and extrinsic (social) subaxes that describe major impacts on QOL. Voice complaints were 100% penetrant, whereas breathing and swallowing symptoms afflicted 76% and 66%, respectively, of interviewees. Of affected patients, solid and liquid dysphagia was experienced by 70% and 63%, respectively. Of dyspneic patients, shortness of breath existed with talking (97%) and exercise (72%). Persistent throat congestion (76%), weakened cough (62%), globus (62%), and dysfunctional valsalva (41%) were frequent. Patient experience with UVFI has been incompletely characterized. This qualitative assessment and preliminary taxonomy highlight several related patient experiences not well documented in the literature or incorporated into currently available metrics. Copyright © 2014 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

A preliminary assessment of the potential for 'team science' in DOE Energy Innovation Hubs and Energy Frontier Research Centers

International Nuclear Information System (INIS)

Boardman, Craig; Ponomariov, Branco

2011-01-01

President Obama has called for the development of new energy technologies to address our national energy needs and restore US economic competitiveness. In response, the Department of Energy has established new R and D modalities for energy research and development designed to facilitate collaboration across disciplinary, institutional, and sectoral boundaries. In this research note, we provide a preliminary assessment of the potential for essential mechanisms for coordinated problem solving among diverse actors within two new modalities at the DOE: Energy Innovation Hubs and Energy Frontier Research Centers. - Highlights: → Energy Frontier Research Centers may lack the basic mechanisms for coordinating diverse actors. → Divergent goals across diverse actors may hinder coordination in Energy Innovation Hubs. → The implementation of these and similar energy policies require further investigation.

Development of Integrated Assessment Technology of Risk and Performance

International Nuclear Information System (INIS)

Yang, Jun Eon; Kang, Dae Il; Kang, Hyun Gook

2010-04-01

The main idea and contents are summarized as below 1) Development of new risk/performance assessment system innovating old labor-intensive risk assessment structure - New consolidated risk assessment technology from various hazard(flood, fire, seismic in NPP) - BOP model development for performance monitoring - Consolidated risk/performance management system for consistency and efficiency of NPP 2) Resolution technology for pending issues in PSA - Base technology for PSA of digital I and C system - Base technology for seismic PSA reflecting domestic seismic characteristics and aging effect - Uncertainty reduction technology for level 2 PSA and best estimation of containment failure frequency 3) Next generation risk/performance assessment technology - Human-induced error reduction technology for efficient operation of a NPP

Technical and Technological Skills Assessment in Laparoscopic Surgery

Science.gov (United States)

Chang, Avril; Vincent, Charles

2006-01-01

Objectives: Surgical appraisal and revalidation are key components of good surgical practice and training. Assessing technical skills in a structured manner is still not widely used. Laparoscopic surgery also requires the surgeon to be competent in technological aspects of the operation. Methods: Checklists for generic, specific technical, and technological skills for laparoscopic cholecystectomies were constructed. Two surgeons with >12 years postgraduate surgical experience assessed each operation blindly and independently on DVD. The technological skills were assessed in the operating room. Results: One hundred operations were analyzed. Eight trainees and 10 consultant surgeons were recruited. No adverse events occurred due to technical or technological skills. Mean interrater reliability was kappa=0.88, P=technical and technological skills between trainee and consultant surgeons were significant, Mann-Whitney P=technical and technological skills can be measured to assess performance of laparoscopic surgeons. This technical and technological assessment tool for laparoscopic surgery seems to have face, content, concurrent, and construct validities and could be modified and applied to any laparoscopic operation. The tool has the possibility of being used in surgical training and appraisal. We aim to modify and apply this tool to advanced laparoscopic operations. PMID:17212881

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992. Volume 3, Model parameters: Sandia WIPP Project

Energy Technology Data Exchange (ETDEWEB)

1992-12-29

This volume documents model parameters chosen as of July 1992 that were used by the Performance Assessment Department of Sandia National Laboratories in its 1992 preliminary performance assessment of the Waste Isolation Pilot Plant (WIPP). Ranges and distributions for about 300 modeling parameters in the current secondary data base are presented in tables for the geologic and engineered barriers, global materials (e.g., fluid properties), and agents that act upon the WIPP disposal system such as climate variability and human-intrusion boreholes. The 49 parameters sampled in the 1992 Preliminary Performance Assessment are given special emphasis with tables and graphics that provide insight and sources of data for each parameter.

Legitimation problems of participatory processes in technology assessment and technology policy.

Science.gov (United States)

Saretzki, Thomas

2012-11-01

Since James Carroll (1971) made a strong case for "participatory technology", scientists, engineers, policy-makers and the public at large have seen quite a number of different approaches to design and implement participatory processes in technology assessment and technology policy. As these participatory experiments and practices spread over the last two decades, one could easily get the impression that participation turned from a theoretical normative claim to a working practice that goes without saying. Looking beyond the well-known forerunners and considering the ambivalent experiences that have been made under different conditions in various places, however, the "if" and "how" of participation are still contested issues when questions of technology are on the agenda. Legitimation problems indicate that attempts to justify participation in a given case have not been entirely successful in the eyes of relevant groups among the sponsors, participants, organizers or observers. Legitimation problems of participatory processes in technology assessment and technology policy vary considerably, and they do so not only with the two domains and the ways of their interrelation or the specific features of the participatory processes. If we ask whether or not participation is seen as problematic in technology assessment and technology policy-making and in what sense it is being evaluated as problematic, then we find that the answer depends also on the approaches and criteria that have been used to legitimize or delegitimize the call for a specific design of participation.

The Past and the Future of Constructive Technology Assessment

NARCIS (Netherlands)

Schot, Johan; Rip, Arie

1997-01-01

Constructive technology assessment (CTA) is a member of the family of technology assessment approaches. developed in particular in the Netherlands and Denmark. CTA shifts the focus away from assessing impacts of new technologies to broadening design, development, and implementation processes.

Technology assessments in transportation: survey of recent literature

Energy Technology Data Exchange (ETDEWEB)

LaBelle, S.J.

1980-03-01

A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

Technology of prognostication of sporting achievements of badminton players on the stage of preliminary base preparation.

Directory of Open Access Journals (Sweden)

Shyyan V.N.

2011-08-01

Full Text Available In the article the technology of evaluation of potential capabilities of badminton players is displayed 12-14 years. The functional, pedagogical and psychophysiological criteria which became a component parts of the developed analytical models of sportsmen-badminton players are explored. The criterion for the quantitative estimation of perspective is offered, which allows on the 9-ti point scale to estimate perspective of badminton players on the stage of preliminary base preparation.

Preliminary psycometric assessment of the Brazilian version of the DISABKIDS Atopic Dermatitis Module.

Science.gov (United States)

Deon, Keila Cristiane; Santos, Danielle Maria de Souza Sério dos; Bullinger, Monika; Santos, Claudia Benedita dos

2011-12-01

To assess preliminary psychometric properties of the Brazilian Portuguese version of a questionnaire for measuring health-related quality of life in children and adolescents with atopic dermatitis. Cross-sectional study with a sample consisting of 52 children and adolescents aged 8 to 18 diagnosed with atopic dermatitis, and their parents or caregivers, selected at the dermatology department of a university hospital in the city of São Paulo, Southeast Brazil, in 2009. Construct validity, internal consistency and agreement between the responses of children and adolescents and their parents or caregivers were assessed in the Brazilian Portuguese version of the DISABKIDS-Atopic Dermatitis Module (ADM). Adequate internal consistency was found with Cronbach's alpha coefficients of 0.7024/0.8124 and 0.7239/0.8604. The multitrait multimethod analysis for assessing convergent validity showed measures higher than 0.30 for all items. The analysis showed good discriminant validity. Agreement between child self-report and parent proxy-report was evaluated using intra-class correlation with measures impact and social stigma of disease of 0.8173 and 0.7629, respectively. The study results showed that the DISABKIDS-ADM can be used by Brazilian researchers after its complete validation as it showed adequate preliminary psychometric properties and can be considered a valid, reliable instrument.

Contact radiotherapy. Report of technological assessment

International Nuclear Information System (INIS)

Ortholan, Cecile; Melin, Nicole; Lee-Robin, Sun Hae; David, Denis Jean; Pages, Frederique; Devaud, Christine; Noel, Georges; Biga, Julie; Moty-Monnereau, Celine; Canet, Philippe; Lascols, Sylvie; Lamas, Muriel; Ramdine, Jessica; Tuil, Louise

2008-10-01

This report aims at assessing safety, indications, the role in therapeutic strategy, and efficiency of contact radiotherapy. It also aims at answering questions like: is the contact radiotherapy technique validated? What are the indications for contact radiotherapy? What about the efficiency and safety of contact radiotherapy? After a presentation of preliminary notions on radiotherapy (radiation types, dose, and irradiation techniques), the report presents this specific technique of contact radiotherapy: definition, devices, use recommendations, issues of radiation protection, modalities of performance of a contact radiotherapy session, and concerned pathologies. Then, based on a literature survey, this report addresses the various concerned tumours (skin, rectum, brain, breast), indicates some general information about these tumours (epidemiological data, anatomy and classification, therapeutic options, radiotherapy), and proposes an assessment of the efficiency and safety of contact radiotherapy

Preliminary Evaluation Of Commercial Supercapacitors For Space Applications

Science.gov (United States)

Gineste, Valery; Loup, Didier; Mattesco, Patrick; Neugnot, Nicolas

2011-10-01

Supercapacitors are identified since years as a new technology enabling energy storage together with high power delivery capability to the system. A recent ESA study [1] led by Astrium has demonstrated the interest of these devices for space application, providing that reliability and end of life performances are demonstrated. A realistic commercial on the shelf (COTS) approach (or with limited design modification approved by potential suppliers) has been favoured (as for batteries). This paper presents preliminary test results done by Astrium on COTS supercapacitors: accelerated life tests, calendar life tests, technology analyses. Based on these results, assessment and lessons learnt are drawn in view of future exhaustive supercapacitor validation and future qualification.

Spent Nuclear Fuel Alternative Technology Risk Assessment

Energy Technology Data Exchange (ETDEWEB)

Perella, V.F.

1999-11-29

A Research Reactor Spent Nuclear Fuel Task Team (RRTT) was chartered by the Department of Energy (DOE) Office of Spent Fuel Management with the responsibility to recommend a course of action leading to a final technology selection for the interim management and ultimate disposition of the foreign and domestic aluminum-based research reactor spent nuclear fuel (SNF) under DOE''s jurisdiction. The RRTT evaluated eleven potential SNF management technologies and recommended that two technologies, direct co-disposal and an isotopic dilution alternative, either press and dilute or melt and dilute, be developed in parallel. Based upon that recommendation, the Westinghouse Savannah River Company (WSRC) organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and provide a WSRC recommendation to DOE for a preferred SNF alternative management technology. A technology risk assessment was conducted as a first step in this recommendation process to determine if either, or both, of the technologies posed significant risks that would make them unsuitable for further development. This report provides the results of that technology risk assessment.

Spent Nuclear Fuel Alternative Technology Risk Assessment

International Nuclear Information System (INIS)

Perella, V.F.

1999-01-01

A Research Reactor Spent Nuclear Fuel Task Team (RRTT) was chartered by the Department of Energy (DOE) Office of Spent Fuel Management with the responsibility to recommend a course of action leading to a final technology selection for the interim management and ultimate disposition of the foreign and domestic aluminum-based research reactor spent nuclear fuel (SNF) under DOE''s jurisdiction. The RRTT evaluated eleven potential SNF management technologies and recommended that two technologies, direct co-disposal and an isotopic dilution alternative, either press and dilute or melt and dilute, be developed in parallel. Based upon that recommendation, the Westinghouse Savannah River Company (WSRC) organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and provide a WSRC recommendation to DOE for a preferred SNF alternative management technology. A technology risk assessment was conducted as a first step in this recommendation process to determine if either, or both, of the technologies posed significant risks that would make them unsuitable for further development. This report provides the results of that technology risk assessment

Preliminary dose assessment of the Chernobyl accident

International Nuclear Information System (INIS)

Hull, A.P.

1987-01-01

From the major accident at Unit 4 of the Chernobyl nuclear power station, a plume of airborne radioactive fission products was initially carried northwesterly toward Poland, thence toward Scandinavia and into Central Europe. Reports of the levels of radioactivity in a variety of media and of external radiation levels were collected in the Department of Energy's Emergency Operations Center and compiled into a data bank. Portions of these and other data which were obtained directly from published and official reports were utilized to make a preliminary assessment of the extent and magnitude of the external dose to individuals downwind from Chernobyl. Radioactive 131 I was the predominant fission product. The time of arrival of the plume and the maximum concentrations of 131 I in air, vegetation and milk and the maximum reported depositions and external radiation levels have been tabulated country by country. A large amount of the total activity in the release was apparently carried to a significant elevation. The data suggest that in areas where rainfall occurred, deposition levels were from ten to one-hundred times those observed in nearby ''dry'' locations. Sufficient spectral data were obtained to establish average release fractions and to establish a reference spectra of the other nuclides in the release. Preliminary calculations indicated that the collective dose equivalent to the population in Scandinavia and Central Europe during the first year after the Chernobyl accident would be about 8 x 10 6 person-rem. From the Soviet report, it appears that a first year population dose of about 2 x 10 7 person-rem (2 x 10 5 Sv) will be received by the population who were downwind of Chernobyl within the U.S.S.R. during the accident and its subsequent releases over the following week. 32 refs., 14 figs., 20 tabs

Space-reactor electric systems: subsystem technology assessment

International Nuclear Information System (INIS)

Anderson, R.V.; Bost, D.; Determan, W.R.

1983-01-01

This report documents the subsystem technology assessment. For the purpose of this report, five subsystems were defined for a space reactor electric system, and the report is organized around these subsystems: reactor; shielding; primary heat transport; power conversion and processing; and heat rejection. The purpose of the assessment was to determine the current technology status and the technology potentials for different types of the five subsystems. The cost and schedule needed to develop these potentials were estimated, and sets of development-compatible subsystems were identified

Preliminary Findings from an Analysis of Building Energy Information System Technologies

Energy Technology Data Exchange (ETDEWEB)

Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish; Price, Philip

2009-06-01

Energy information systems comprise software, data acquisition hardware, and communication systems that are intended to provide energy information to building energy and facilities managers, financial managers, and utilities. This technology has been commercially available for over a decade, however recent advances in Internet and other information technology, and analytical features have expanded the number of product options that are available. For example, features such as green house gas tracking, configurable energy analyses and enhanced interoperability are becoming increasingly common. Energy information systems are used in a variety of commercial buildings operations and environments, and can be characterized in a number of ways. Basic elements of these systems include web-based energy monitoring, web-based energy management linked to controls, demand response, and enterprise energy management applications. However the sheer number and variety of available systems complicate the selection of products to match the needs of a given user. In response, a framework was developed to define the capabilities of different types of energy information systems, and was applied to characterize approximately 30 technologies. Measurement is a critical component in managing energy consumption and energy information must be shared at all organizational levels to maintain persistent, efficient operations. Energy information systems are important to understand because they offer the analytical support to process measured data into information, and they provide the informational link between the primary actors who impact building energy efficiency - operators, facilities and energy managers, owners and corporate decision makers. In this paper, preliminary findings are presented, with a focus on overall trends and the general state of the technology. Key conclusions include the need to further pursue standardization and usability, x-y plotting as an under-supported feature, and

Fiscal 1975 Sunshine Project research report. Technology assessment on hydrogen energy technology. Part 2; 1975 nendo suiso energy gijutsu no technology assessment seika hokokuksho. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-03-31

This research assesses the impact of development of practical hydrogen energy technology on the economy, society and environment in Japan, and proposes some effective countermeasures, the required technical development target and a promising promotion system. The example of technology assessment assuming practical technology several tens years after is hardly found. Hydrogen energy technology is in the first stage among (1) initial planning stage, (2) technical research and development stage, (3) practical technology stage and (4) service operation stage. In the first fiscal year, as the first stage of determination of the communication route between society and technology, study was made on the concrete system image of practical technology. In this fiscal year, study was made entirely on preparation of the scenario for imaging the future economy and society concretely, modifying the planning of the hydrogen energy system. Through comparison of the scenario and system, the meaning and problem of the hydrogen energy technology were clarified. (NEDO)

Predicting technology operational availability using technical maturity assessment

International Nuclear Information System (INIS)

Kenley, C.R.; Creque, T.R.

1998-01-01

A technical maturity assessment method was performed by systems engineers in collaboration with an advisory panel composed of team members from different Department of Energy sites and from different engineering and science disciplines. Various stabilization technologies were assessed annually as to their relative maturity and availability for use in stabilizing nuclear materials. After three years of assessments, several of the technologies are now components of operational systems. A regression analysis of the historical assessments was performed, and it was concluded that the numerical technical maturity score produced by a team of experts can provide a powerful predictor of the time remaining until the operational application of technologies

The contribution of health technology assessment, health needs assessment, and health impact assessment to the assessment and translation of technologies in the field of public health genomics.

Science.gov (United States)

Rosenkötter, N; Vondeling, H; Blancquaert, I; Mekel, O C L; Kristensen, F B; Brand, A

2011-01-01

The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could contribute to the systematic translation and assessment of genomic health applications by focussing at population level and on public health policy making. It is shown to what extent HTA, HNA and HIA contribute to translational research by using the continuum of translational research (T1-T4) in genomic medicine as an analytic framework. The selected assessment methodologies predominantly cover 2 to 4 phases within the T1-T4 system. HTA delivers the most complete set of methodologies when assessing health applications. HNA can be used to prioritize areas where genomic health applications are needed or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health applications. They are broad in scope and go beyond the continuum of T1-T4 translational research regarding policy translation. Copyright © 2010 S. Karger AG, Basel.

The Contribution of Health Technology Assessment, Health Needs Assessment, and Health Impact Assessment to the Assessment and Translation of Technologies in the Field of Public Health Genomics

DEFF Research Database (Denmark)

Rosenkotter, N.; Vondeling, H.; Blancquaert, I.

2011-01-01

contribute to the systematic translation and assessment of genomic health applications by focussing at population level and on public health policy making. It is shown to what extent HTA, HNA and HIA contribute to translational research by using the continuum of translational research (T1-T4) in genomic...... into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [ health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could...... medicine as an analytic framework. The selected assessment methodologies predominantly cover 2 to 4 phases within the T1-T4 system. HTA delivers the most complete set of methodologies when assessing health applications. HNA can be used to prioritize areas where genomic health applications are needed...

Technology assessment and social science research on technology

International Nuclear Information System (INIS)

Thienen, V. von

1983-01-01

In a first step this bibliography wants to overcome the want of systematic scientific data compilations and evaluations of experiences in studies on technology assessment. It concentrates on the social and political aspects of the development of technologies and the decision on their utilization by presenting titles which have been published in English- and German-speaking countries in the past decade. The bibliography is divided into various chapters and subchapters. The index part contains authors' indexes and publishers' indexes, subject indexes, other bibliographies and selected periodicals. (orig.) With 1647 refs [de

Technologies for Language Assessment.

Science.gov (United States)

Burstein, Jill; And Others

1996-01-01

Reviews current and developing technology uses that are relevant to language assessment and discusses examples of recent linguistic applications from the laboratory at the Educational Testing Service. The processes of language test development are described and the functions they serve from the perspective of a large testing organization are…

A preliminary assessment of the potential for 'team science' in DOE Energy Innovation Hubs and Energy Frontier Research Centers

Energy Technology Data Exchange (ETDEWEB)

Boardman, Craig, E-mail: boardman.10@osu.edu [John Glenn School of Public Affairs, Ohio State University (United States); Ponomariov, Branco, E-mail: branco.ponomariov@utsa.edu [Department of Public Administration, University of Texas at San Antonio (United States)

2011-06-15

President Obama has called for the development of new energy technologies to address our national energy needs and restore US economic competitiveness. In response, the Department of Energy has established new R and D modalities for energy research and development designed to facilitate collaboration across disciplinary, institutional, and sectoral boundaries. In this research note, we provide a preliminary assessment of the potential for essential mechanisms for coordinated problem solving among diverse actors within two new modalities at the DOE: Energy Innovation Hubs and Energy Frontier Research Centers. - Highlights: > Energy Frontier Research Centers may lack the basic mechanisms for coordinating diverse actors. > Divergent goals across diverse actors may hinder coordination in Energy Innovation Hubs. > The implementation of these and similar energy policies require further investigation.

Swedish Technology Teachers' Views on Assessing Student Understandings of Technological Systems

Science.gov (United States)

Schooner, Patrick; Klasander, Claes; Hallström, Jonas

2018-01-01

Technology education is a new school subject in comparison with other subjects within the Swedish compulsory school system. Research in technology education shows that technology teachers lack experience of and support for assessment in comparison with the long-term experiences that other teachers use in their subjects. This becomes especially…

Sustainability assessment of advanced wastewater treatment technologies

DEFF Research Database (Denmark)

Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

2007-01-01

, which includes technical, economic and environmental aspects. The technical and economic assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, Membrane Bioreactor (MBR), and UV in combination......As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment...... with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

Sustainability assessment of advanced wastewater treatment technologies

DEFF Research Database (Denmark)

Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

2008-01-01

, which includes technical, economical and environmental aspects. The technical and economical assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, membrane bioreactor (MBR) and UV in combination......As a consequence of the EU Water Framework Directive more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advanced treatment technologies. This paper describes a holistic assessment...... with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

Assessing internet addiction using the parsimonious internet addiction components model—A preliminary study.

OpenAIRE

Kuss, D.J.; Shorter, G.W.; Rooij, A.J. van; Griffiths, M.D.; Schoenmakers, T.M.

2014-01-01

Internet usage has grown exponentially over the last decade. Research indicates that excessive Internet use can lead to symptoms associated with addiction. To date, assessment of potential Internet addiction has varied regarding populations studied and instruments used, making reliable prevalence estimations difficult. To overcome the present problems a preliminary study was conducted testing a parsimonious Internet addiction components model based on Griffiths’ addiction components (Journal ...

Preliminary Shielding Assessment for the IFF System in the RAON Heavy-ion Facility

International Nuclear Information System (INIS)

Lee, Cheol Woo; Lee, Youngouk; Kim, Jong Won; Kim, Mijung

2014-01-01

A heavy-ion accelerator facility is under a development in Korea to use in the basic science research and various application areas. In this facility, the In-Flight Fragment (IFF) target and isotope separator has been designed to produce various isotopes and transport the interesting isotopes into the experimental rooms. In this work, preliminary radiation shielding assessment was performed for the IFF target room

Preliminary assessment of the controlled release of radionuclides from waste packages containing borosilicate waste glass

International Nuclear Information System (INIS)

Strachan, D.M.; McGrail, B.P.; Apted, M.J.; Engle, D.W.; Eslinger, P.W.

1990-06-01

The purpose of this report is to provide a preliminary assessment of the release-rate for an engineered barriers subsystem (EBS) containing waste packages of defense high-level waste borosilicate glass at geochemical and hydrological conditions similar to the those at Yucca Mountain. The relationship between the proposed Waste Acceptance Preliminary Specifications (WAPS) test of glass- dissolution rate and compliance with the NRC's release-rate criterion is also evaluated. Calculations are reported for three hierarchical levels: EBS analysis, waste-package analysis, and waste-glass analysis. The following conclusions identify those factors that most acutely affect the magnitude of, or uncertainty in, release-rate performance

Preliminary assessment report for Grubbs/Kyle Training Center, Smyrna/Rutherford County Regional Airport, Installation 47340, Smyrna, Tennessee

International Nuclear Information System (INIS)

Dennis, C.; Stefano, J.

1993-07-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Tennessee Army National Guard (TNARNG) property near Smyrna, Tennessee. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Grubbs/Kyle Training Center property, the requirement of the Department of Defense Installation Restoration Program

Improving tag/seal technologies: the vulnerability assessment component

International Nuclear Information System (INIS)

Jones, J.L.

1996-01-01

The Department of Energy (DOE), specifically the Office of Nonproliferation and National Security, has sponsored the development of numerous tag and seal technologies for high-security/high-valued applications. One important component in this technology development effort has been the continuous integration of vulnerability assessments. The Idaho National Engineering Laboratory (INEL) has been the lead laboratory for vulnerability assessments of fiber-optic-based tag/seal technologies. This paper presents a brief historical overview and the current status of the DOE high-security tag/seal development program and discusses INEL's adversarial role and assessment philosophy. Verification testing criteria used to define ''successful'' tampering attempts/attacks are discussed. Finally, the advantages of integrating a vulnerability assessment into the development of commercial security tag/seals are presented

Statistical assessment of the learning curves of health technologies.

Science.gov (United States)

Ramsay, C R; Grant, A M; Wallace, S A; Garthwaite, P H; Monk, A F; Russell, I T

2001-01-01

(1) To describe systematically studies that directly assessed the learning curve effect of health technologies. (2) Systematically to identify 'novel' statistical techniques applied to learning curve data in other fields, such as psychology and manufacturing. (3) To test these statistical techniques in data sets from studies of varying designs to assess health technologies in which learning curve effects are known to exist. METHODS - STUDY SELECTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): For a study to be included, it had to include a formal analysis of the learning curve of a health technology using a graphical, tabular or statistical technique. METHODS - STUDY SELECTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): For a study to be included, it had to include a formal assessment of a learning curve using a statistical technique that had not been identified in the previous search. METHODS - DATA SOURCES: Six clinical and 16 non-clinical biomedical databases were searched. A limited amount of handsearching and scanning of reference lists was also undertaken. METHODS - DATA EXTRACTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): A number of study characteristics were abstracted from the papers such as study design, study size, number of operators and the statistical method used. METHODS - DATA EXTRACTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): The new statistical techniques identified were categorised into four subgroups of increasing complexity: exploratory data analysis; simple series data analysis; complex data structure analysis, generic techniques. METHODS - TESTING OF STATISTICAL METHODS: Some of the statistical methods identified in the systematic searches for single (simple) operator series data and for multiple (complex) operator series data were illustrated and explored using three data sets. The first was a case series of 190 consecutive laparoscopic fundoplication procedures performed by a single surgeon; the second

Preliminary assessment of the possibility of supporting the decomposition of biodegradable packaging

OpenAIRE

Niekraś Lidia; Moliszewska Ewa

2017-01-01

This article presents a preliminary evaluation of the possibility of using grass biomass from a sports field as a compost ingredient which positively affects the degree of decomposition of the biodegradable wrappings. For 5 months the biodegradable bags were stored, both empty and filled with organic waste in the heap of grass clippings. After that period, fragments of the bags were observed under the microscope and then assessed the state of their decomposition. The results indicate that the...

Preliminary assessment of fleets covered by the Energy Policy Act

Energy Technology Data Exchange (ETDEWEB)

Hu, P.S.; Davis, S.C.; Wang, M.Q. [and others

1994-12-31

To facilitate the goal of decreasing oil imports by 10 percent by the year 2000 and 30 percent by 2010, two sections of the Energy Policy Act encourage and mandate alternative fuel vehicles in the acquisition of fleet vehicles. The first step in estimating the contribution of these mandates toward meeting the aforementioned goal entails identifying affected fleets. This paper presents a preliminary assessment of potential vehicle fleet coverage. Only a limited number of companies in the methanol, ethanol, and hydrogen industries are likely to quality for this mandate. Whereas, many of the oil producers, petroleum refiners, and electricity companies are likely to be regulated.

Sustaining Innovation: Developing an Instructional Technology Assessment Process

Science.gov (United States)

Carmo, Monica Cristina

2013-01-01

This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

Preliminary quantitative assessment of earthquake casualties and damages

DEFF Research Database (Denmark)

Badal, J.; Vázquez-Prada, M.; González, Á.

2005-01-01

Prognostic estimations of the expected number of killed or injured people and about the approximate cost associated with the damages caused by earthquakes are made following a suitable methodology of wide-ranging application. For the preliminary assessment of human life losses due to the occurrence...... of a relatively strong earthquake we use a quantitative model consisting of a correlation between the number of casualties and the earthquake magnitude as a function of population density. The macroseismic intensity field is determined in accordance with an updated anelastic attenuation law, and the number...... the local social wealth as a function of the gross domestic product of the country. This last step is performed on the basis of the relationship of the macroseismic intensity to the earthquake economic loss in percentage of the wealth. Such an approach to the human casualty and damage levels is carried out...

A new methodology for assessment of pectus excavatum correction after bar removal in Nuss procedure: Preliminary study.

Science.gov (United States)

Gomes-Fonseca, João; Vilaça, João L; Henriques-Coelho, Tiago; Direito-Santos, Bruno; Pinho, António C M; Fonseca, Jaime C; Correia-Pinto, Jorge

2017-07-01

The objective is to present a new methodology to assess quantitatively the impact of bar removal on the anterior chest wall, among patients with pectus excavatum who have undergone the Nuss procedure, and present a preliminary study using this methodology. We propose to acquire, for each patient, the surface of the anterior chest wall using a three-dimensional laser scanner at subsequent time points (short term: before and after surgery; long term: follow-up visit, 6months, and 12months after surgery). After surfaces postprocessing, the changes are assessed by overlapping and measuring the distances between surfaces. In this preliminary study, three time points were acquired and two assessments were performed: before vs after bar removal (early) and before vs 2-8weeks after bar removal (interim). In 21 patients, the signed distances and volumes between surfaces were computed and the data analysis was performed. This methodology revealed useful for monitoring changes in the anterior chest wall. On average, the mean, maximum, and volume variations, in the early assessment, were -0.1±0.1cm, -0.6±0.2cm, and 47.8±22.2cm 3 , respectively; and, in the interim assessment, were -0.5±0.2cm, -1.3±0.4cm, and 122.1±47.3cm 3 , respectively (pbar was in situ was inversely and significantly correlated with postretraction and was a relevant predictor of its decrease following surgery (pbar was in situ may be the main determinant of the anterior chest wall retraction following bar removal. Further studies should continue to corroborate and reinforce the preliminary findings, by increasing the sample size and performing long-term assessments. III. Copyright © 2017 Elsevier Inc. All rights reserved.

Guidance on the Technology Performance Level (TPL) Assessment Methodology

Energy Technology Data Exchange (ETDEWEB)

Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States); Roberts, Jesse D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Babarit, Aurelien [Ecole Centrale de Nantes (France). Lab. of Research in Hydrodynamics, Energetics and Atmospheric Environment (LHEEA); Costello, Ronan [Wave Venture, Penstraze (United Kingdom); Bull, Diana L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neilson, Kim [Ramboll, Copenhagen (Denmark); Bittencourt, Claudio [DNV GL, London (United Kingdom); Kennedy, Ben [Wave Venture, Penstraze (United Kingdom); Malins, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dykes, Katherine [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-09-01

This document presents the revised Technology Performance Level (TPL) assessment methodology. There are three parts to this revised methodology 1) the Stakeholder Needs and Assessment Guidance (this document), 2) the Technical Submission form, 3) the TPL scoring spreadsheet. The TPL assessment is designed to give a technology neutral or agnostic assessment of any wave energy converter technology. The focus of the TPL is on the performance of the technology in meeting the customer’s needs. The original TPL is described in [1, 2] and those references also detail the critical differences in the nature of the TPL when compared to the more widely used technology readiness level (TRL). (Wave energy TRL is described in [3]). The revised TPL is particularly intended to be useful to investors and also to assist technology developers to conduct comprehensive assessments in a way that is meaningful and attractive to investors. The revised TPL assessment methodology has been derived through a structured Systems Engineering approach. This was a formal process which involved analyzing customer and stakeholder needs through the discipline of Systems Engineering. The results of the process confirmed the high level of completeness of the original methodology presented in [1] (as used in the Wave Energy Prize judging) and now add a significantly increased level of detail in the assessment and an improved more investment focused structure. The revised TPL also incorporates the feedback of the Wave Energy Prize judges.

Technology and public policy: The process of technology assessment in the federal government

Science.gov (United States)

Coates, V. T.

1975-01-01

A study was conducted to provide a descriptive and analytical review of the concept of technology assessment and the current status of its applications in the work of the federal executive agencies. The origin of the term technology assessment was examined along with a brief history of its discussion and development since 1966 and some of the factors influencing that development.

Technology assessment of in situ uranium mining

International Nuclear Information System (INIS)

Cowan, C.E.

1981-01-01

The objective of the PNL portion of the Technology Assessment project is to provide a description of the current in situ uranium mining technology; to evaluate, based on available data, the environmental impacts and, in a limited fashion, the health effects; and to explore the impediments to development and deployment of the in situ uranium mining technology

Technology assessment for Spaceship Two, space tourism, and private spaceflight

Science.gov (United States)

Hancock, Randy

A seven-step technology assessment was conducted to address questions regarding the significance and likely consequences associated with the introduction of Spaceship Two, space tourism, and private spaceflight. Impacts were assessed across four categories: the Role and Functions of Government, Private Industry Factors, Cultural and Societal Impacts, and the Time Frame in which these impacts were anticipated to occur. The technology assessment findings were compared to the results of expert interviews that addressed the sane four categories. The researcher noted that, while there was overwhelming agreement between the technology assessment's primary impacts and the expert interview responses, there were several differences. The technology assessment and interviewees agreed that the federal government would likely be both a regulator and user of private spaceflight. Both agreed that business partnerships would be key in pursuing private spaceflight. There was also consensus that, as market forces come to bear, ticket prices would drop and a larger market and broader passenger demographic would emerge. The technology assessment and experts agreed that an accident, especially one early in the industry's evolution, could be disastrous. Both agreed that private spaceflight can serve as a inspiration to students and be a positive influence in society, and both agreed that the start of passenger flights should take place in the 2010 - 2012 timeframe. Due to the potentially disastrous consequences of an accident, there was agreement between the technology assessment and experts on the value of flight and ground crew training, driven by insurance carriers and federal mandate. Most differences between the technology assessment's findings and the expert interview responses were due to omission, rather than direct disagreement. However, this was not the case in every instance. The most significant difference between the technology assessment and the experts involved the

Technology assessment and technology policy in Europe : New concepts, new goals, new infrastructures

NARCIS (Netherlands)

Smits, R.; Leyten, J.; Hertog, P. den

1995-01-01

Starting from the observation that the technological potentials are underutilized in economic and in social tems, this article raises the question of what role technology assessment (TA) can play in technology policy to address this problem. The causes of the problem of underutilization are analyzed

Preliminary assessment on compatibility of DUPIC fuel with CANDU-6

International Nuclear Information System (INIS)

Choi, Hang-Bok; Roh, G.H.; Jeong, C.J.; Rhee, B.W.; Choi, J.W.; Boss, C.R.

1997-01-01

The compatibility of DUPIC fuel with the existing CANDU-6 reactor was assessed. The technical issues of DUPIC fuel compatibility were chosen based on the CANDU physics design requirements and inherent characteristics of DUPIC fuel. The compatibility was assessed for the reference DUPIC fuel composition which was determined to reduce the composition heterogeneity and improve the spent PWR fuel utilization. Preliminary studies on a CANDU core loaded with DUPIC fuel have shown that the nominal power distribution is flatter than that of a natural uranium core when a 2-bundle shift refueling scheme is used, which reduces the reactivity worths of devices in the core and, therefore, the performance of reactivity devices was assessed. The safety of the core was assessed by a LOCA simulation and it was found that the power pulse upon LOCA can be maintained below that in the natural uranium core when a poison material is used in the DUPIC fuel. For the feasibility of handling DUPIC fuel in the plant, it will be necessary to introduce new equipment to load the DUPIC fuel in the refueling magazine. The radiation effect of DUPIC fuel on both the reactor hardware and the environment will be qualitatively analyzed later. (author)

Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

Science.gov (United States)

Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

2015-04-01

Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

INFORMATION AND COMMUNICATION TECHNOLOGIES TRAINING: CRITERIA FOR INTERNAL QUALITY ASSESSMENT

Directory of Open Access Journals (Sweden)

Oleg M. Spirin

2011-02-01

Full Text Available In the article the concept of information and communication technology training is specified. It is grounded an internal criteria of information and communication technologies training quality assessment based on experience of the organization, carrying out, analysis of experimental work results on quality assessment of designing, working out, efficiency of methodical system of informatics teachers base vocational training introduction in the conditions of credit-modular technology. Indicators and approaches of their assessment to define the criteria degree are resulted. Indicators of criteria "level differentiation", "individualization" and "intensification" of educational process for information and communication technologies training quality assessment are specified.

FY 1974 report on the results of the Sunshine Project. Technology assessment of hydrogen energy technology; 1974 nendo suiso energy gijutsu no technology assessment seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-04-30

This is aimed at studying the relation between the technology development of hydrogen energy and the society. In Chapter 1, a meaning of technology assessment was examined. When applying it to the hydrogen energy technology, the paper presented what content it has. In Chapter 2, the needs for hydrogen energy in society were made clear in comparison with the energy supply/demand structure in Japan and characteristics of hydrogen energy. In Chapter 3, the paper showed what kinds of technology are being developed to meet the needs in this society and arranged viewpoints for evaluating the effectiveness of the technology. In Chapter 4, the paper studied the positioning of hydrogen energy technology in the future society, and presented as examples more than one hydrogen energy/system plans which become the base to describe the impact of the technology on the society. If taking technology assessment as a part of the communication activities between the technology development and the society as did in this study, these system plans are something like the ring for people in each field to talk with. In Chapter 5, the study made from each aspect was arranged. (NEDO)

Preliminary assessment of partitioning and transmutation as a radioactive waste management concept

International Nuclear Information System (INIS)

Croff, A.G.; Tedder, D.W.; Drago, J.P.; Blomeke, J.O.; Perona, J.J.

1977-09-01

Partitioning (separating) the actinide elements from nuclear fuel cycle wastes and transmuting (burning) them to fission products in power reactors represents a potentially advanced concept of radioactive waste management which could reduce the long-term (greater than 1000 years) risk associated with geologic isolation of wastes. The greatest uncertainties lie in the chemical separations technology needed to recover greater than 99 percent of the actinides during the reprocessing of spent fuels and their refabrication as fresh fuels or target elements. Preliminary integrated flowsheets based on modifications of the Purex process and supplementary treatment by oxalate precipitation and ion exchange indicate that losses of plutonium in reprocessing wastes might be reduced from about 2.0 percent to 0.1 percent, uranium losses from about 1.7 percent to 0.1 percent, neptunium losses from 100 percent to about 1.2 percent, and americium and curium from 100 percent to about 0.5 percent. Mixed oxide fuel fabrication losses may be reduced from about 0.5 percent to 0.06 percent for plutonium and from 0.5 percent to 0.04 percent for uranium. Americium losses would be about 5.5 percent for the reference system. Transmutation of the partitioned actinides at a rate of 5 to 7 percent per year is feasible in both fast and thermal reactors, but additional studies are needed to determine the most suitable strategy for recycling them to reactors and to assess the major impacts of implementing the concept on fuel cycle operations and costs. It is recommended that the ongoing program to evaluate the feasibility, impacts, costs, and incentives of implementing partitioning-transmutation be continued until a firm assessment of its potentialities can be made. At the present level of effort, achievement of this objective should be possible by 1980. 27 tables, 50 figures

New Modes of Constructive Technology Assessment for Developing Countries

DEFF Research Database (Denmark)

Christensen, David; Remmen, Arne

of transformation or co-creation in a movement from one context to another, i.e. from the North to South. The question here is how to affect a proactive intake of relevant knowledge in decision-making in a technological innovation process so as to increase the likelihood of developing sustainable solutions. A co...... into actor strategies and decision-making processes. There is a variant of ‘constructive’ technology assessment that stands out as useful in multi-actor partnership settings. Placing emphasis on interactive processes, constructive technology assessment embraces active negotiation among involved parties...... in influencing technological change. In developing countries, technology assessment has received relatively little attention, but recent developments have expressed a ‘call-to-arms’ to tailor flexible approaches by ensuring the involvement of diverse stakeholders and citizens and continual learning among...

Life Cycle Assessment of Slurry Management Technologies

DEFF Research Database (Denmark)

Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...... of technologies) having the largest potential for reducing the overall environmental impacts....

Energy Efficient Engine: Control system preliminary definition report

Science.gov (United States)

Howe, David C.

1986-01-01

The object of the Control Preliminary Definition Program was to define a preliminary control system concept as a part of the Energy Efficient Engine program. The program was limited to a conceptual definition of a full authority digital electronic control system. System requirements were determined and a control system was conceptually defined to these requirements. Areas requiring technological development were identified and a plan was established for implementing the identified technological features, including a control technology demonstration. A significant element of this program was a study of the potential benefits of closed-loop active clearance control, along with laboratory tests of candidate clearance sensor elements for a closed loop system.

DECISION ANALYSIS AND TECHNOLOGY ASSESSMENTS FOR METAL AND MASONRY DECONTAMINATION TECHNOLOGIES

International Nuclear Information System (INIS)

Ebadian, M.A.

1999-01-01

The purpose of this investigation was to conduct a comparative analysis of innovative technologies for the non-aggressive removal of coatings from metal and masonry surfaces and the aggressive removal of one-quarter to one-inch thickness of surface from structural masonry. The technologies tested should be capable of being used in nuclear facilities. Innovative decontamination technologies are being evaluated under standard, non-nuclear conditions at the FIU-HCET technology assessment site in Miami, Florida. This study is being performed to support the OST, the Deactivation and Decommissioning (D and D) Focus Area, and the environmental restoration of DOE facilities throughout the DOE complex by providing objective evaluations of currently available decontamination technologies

Health technology assessment in Iran: challenges and views

Science.gov (United States)

Olyaeemanesh, Alireza; Doaee, Shila; Mobinizadeh, Mohammadreza; Nedjati, Mina; Aboee, Parisa; Emami-Razavi, Seyed Hassan

2014-01-01

Background: Various decisions have been made on technology application at all levels of the health system in different countries around the world. Health technology assessment is considered as one of the best scientific tools at the service of policy- makers. This study attempts to investigate the current challenges of Iran’s health technology assessment and provide appropriate strategies to establish and institutionalize this program. Methods: This study was carried out in two independent phases. In the first, electronic databases such as Medline (via Pub Med) and Scientific Information Database (SID) were searched to provide a list of challenges of Iran’s health technology assessment. The views and opinions of the experts and practitioners on HTA challenges were studied through a questionnaire in the second phase which was then analyzed by SPSS Software version 16. This has been an observational and analytical study with a thematic analysis. Results: In the first phase, seven papers were retrieved; from which, twenty- two HTA challenges in Iran were extracted by the researchers; and they were used as the base for designing a structured questionnaire of the second phase. The views of the experts on the challenges of health technology assessment were categorized as follows: organizational culture, stewardship, stakeholders, health system management, infrastructures and external pressures which were mentioned in more than 60% of the cases and were also common in the views. Conclusion: The identification and prioritization of HTA challenges which were approved by those experts involved in the strategic planning of the Department of Health Technology Assessment will be a step forward in the promotion of an evidence- based policy- making and in the production of comprehensive scientific evidence. PMID:25695015

Technology and Current Reading/Literacy Assessment Strategies

Science.gov (United States)

Balajthy, Ernest

2007-01-01

Computer-based technologies offer promise as a means to assess students and provide teachers with better understandings of their students' achievement. This article describes recent developments in computer-based and web-based reading and literacy assessment, focusing on assessment administration, information management, and report creation. In…

Principles of sustainability science to assess alternative energy technologies

CSIR Research Space (South Africa)

Brent, AC

2009-04-01

Full Text Available , adaptive capacity, and complexity of social-ecological systems to assess the potential of such technologies for increasing the carrying capacity and improving the resilience of social-ecological systems, or to assess the resilience of the technological...

Technology-Supported Performance Assessments for Middle School Geoscience

Science.gov (United States)

Zalles, D. R.; Quellmalz, E.; Rosenquist, A.; Kreikemeier, P.

2002-12-01

Under funding from the World Bank, the U.S. Department of Education, the National Science Foundation, and the Federal Government's Global Learning and Observations to Benefit the Environment Program (GLOBE), SRI International has developed and piloted web-accessible performance assessments that measure K-12 students' abilities to use learning technologies to reason with scientific information and communicate evidence-based conclusions to scientific problems. This presentation will describe the assessments that pertain to geoscience at the middle school level. They are the GLOBE Assessments and EPA Phoenix, an instantiation of SRI's model of assessment design known as Integrative Performance Assessments in Technology (IPAT). All are publicly-available on the web. GLOBE engages students in scientific data collection and observation about the environment. SRI's classroom assessments for GLOBE provide sample student assessment tools and frameworks that allow teachers and students to assess how well students can use the data in scientific inquiry projects. Teachers can use classroom assessment tools on the site to develop integrated investigations for assessing GLOBE within their particular science curricula. Rubrics are provided for measuring students' GLOBE-related skills, and alignments are made to state, national, and international science standards. Sample investigations are provided about atmosphere, hydrology, landcover, soils, earth systems, and visualizations. The IPAT assessments present students with engaging problems rooted in science or social science content, plus sets of tasks and questions that require them to gather relevant information on the web, use reasoning strategies to analyze and interpret the information, use spreadsheets, word processors, and other productivity tools, and communicate evidence-based findings and recommendations. In the process of gathering information and drawing conclusions, students are assessed on how well they can operate

[Preliminary assessment of the potential of biochar technology in mitigating the greenhouse effect in China].

Science.gov (United States)

Jiang, Zhi-Xiang; Zheng, Hao; Li, Feng-Min; Wang, Zhen-Yu

2013-06-01

The production of biochar by pyrolysis and its application to soil can sequester the CO2 which was absorbed by plants from atmosphere into soil, in addition it can also bring multiple benefits for agriculture production. On the basis of the available potential survey of the biomass residues from agriculture and forestry section, life cycle assessment was employed to quantify the potential of biochar technology in mitigation of greenhouse gases in our country. The results showed: In China, the amount of available biomass resource was 6.04 x 10(8) t every year and its net greenhouse effect potential was 5.32 x 10(8) t CO(2e) (CO(2e): CO2 equivalent), which was equivalent to 0.88 t CO(2e) for every ton biomass. The greatest of contributor to the total potential was plant carbon sequestration in soil as the form of biochar which accounts for 73.94%, followed by production of renewable energy and its percentage was 23.85%. In summary, production of biochar from agriculture and forestry biomass residues had a significant potential for our country to struggle with the pressure of greenhouse gas emission.

Beyond checklists: toward an ethical-constructive technology assessment

NARCIS (Netherlands)

Kiran, Asle; Oudshoorn, Nelly E.J.; Verbeek, Peter P.C.C.

2015-01-01

While many technology assessments (TAs) formally conducted by TA organizations in Europe and the USA have examined the implications of new technologies for ‘quantifiable risks’ regarding safety, health or the environment, they have largely ignored the ethical implications of those technologies.

Heavy-Section Steel Technology program overview

International Nuclear Information System (INIS)

Pennell, W.E.

1990-01-01

This paper presents a status review of ongoing HSST program tasks aimed at refining the technology used in analysis of reactor pressure vessel fracture margins under pressurized thermal-shock (PTS) loading. Specific fracture-technology issues addressed include vessel flaw density and distribution, shallow flaws, fracture-toughness data transfer, circumferential cracks, ductile tearing and the influence of low-tearing toughness in stainless steel cladding. Preliminary results from the analysis and test programs are presented, together with interim assessments of their potential impact on a reactor vessel PTS analysis. 31 refs., 23 figs., 1 tab

Feasibility Assessment of CO2 Capture Retrofitted to an Existing Cement Plant : Post-combustion vs. Oxy-fuel Combustion Technology

NARCIS (Netherlands)

Gerbelová, Hana; Van Der Spek, Mijndert; Schakel, Wouter

2017-01-01

This research presents a preliminary techno-economic evaluation of CO2 capture integrated with a cement plant. Two capture technologies are evaluated, monoethanolamine (MEA) post-combustion CO2 capture and oxy-fuel combustion. Both are considered potential technologies that could contribute to

Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

Science.gov (United States)

Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

2014-10-01

Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

Norms for environmentally responsible behaviour: An extended taxonomy and a preliminary assessment

DEFF Research Database (Denmark)

Thøgersen, John

The currently used concept of personal or moral norms is ambiguous with regard to its motivational content. Therefore, a revision of the norm taxonomy is suggested, implying a distinction between three types of personal norms, called introjected, identified, and integrated norms. A preliminary as...... is also supported, with the reservation that the different behavioural references are more than just different methods of measuring the same latent construct(s). People evidently hold different norms for different environmentally responsible behaviours.......The currently used concept of personal or moral norms is ambiguous with regard to its motivational content. Therefore, a revision of the norm taxonomy is suggested, implying a distinction between three types of personal norms, called introjected, identified, and integrated norms. A preliminary...... assessment of the taxonomy is carried out based of a survey of a random sample of Danish residents 18 years or older. A range of norm constructs were measured with regard to four environmentally relevant behaviours: buying organic milk, buying energy saving light bulbs, source-separating compostable kitchen...

Methodology of constructive technology assessment in health care

NARCIS (Netherlands)

Douma, Kirsten F. L.; Karsenberg, Kim; Hummel, Marjan J. M.; Bueno-de-Mesquita, Jolien M.; van Harten, Wim H.

2007-01-01

OBJECTIVES: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

Methodology of constructive technology assessment in health care

NARCIS (Netherlands)

Douma, Kirsten F.L.; Hummel, J. Marjan; Karsenberg, Kim; van Harten, Willem H.; Bueno-de-Mesquita, Jolien M.

2007-01-01

Objectives: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

Assessment Training Effects on Student Assessment Skills and Task Performance in a Technology-Facilitated Peer Assessment

Science.gov (United States)

Liu, Xiongyi; Li, Lan

2014-01-01

This study examines the impact of an assessment training module on student assessment skills and task performance in a technology-facilitated peer assessment. Seventy-eight undergraduate students participated in the study. The participants completed an assessment training exercise, prior to engaging in peer-assessment activities. During the…

A Suite of Tools for Technology Assessment

Science.gov (United States)

2007-09-01

Saden, Povinelli & Rosen, 1989). • This was a significant change in emphasis on the part of NASA, where technology had previously viewed as merely...Cost Analysis Symposium, April 13, 2005. A Suite of Tools for Technology Assessment 24 Bibliography - continued: • Sadin, Stanley T.; Povinelli

Information technology resources assessment

Energy Technology Data Exchange (ETDEWEB)

Loken, S.C. [ed.

1993-01-01

The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

Assessing Internet addiction using the parsimonious Internet addiction components model - a preliminary study [forthcoming

OpenAIRE

Kuss, DJ; Shorter, GW; Van Rooij, AJ; Griffiths, MD; Schoenmakers, T

2014-01-01

Internet usage has grown exponentially over the last decade. Research indicates that excessive Internet use can lead to symptoms associated with addiction. To date, assessment of potential Internet addiction has varied regarding populations studied and instruments used, making reliable prevalence estimations difficult. To overcome the present problems a preliminary study was conducted testing a parsimonious Internet addiction components model based on Griffiths’ addiction components (2005), i...

Preliminary Marine Safety Risk Assessment, Brandon Road Lock and Dam Invasive Species Control Measures

Science.gov (United States)

2016-12-01

Decision makers must include control-measure monitoring and emergency “interventions” to insure safety. The Coast Guard operational commanders...system” incorporates a travelling car on a rail above the barge-loading wharf to prevent loading personnel, cargo surveyors, or others from falling...to the Gulf of Mexico . As “Loopers”, they will have already transited the CSSC electric barriers. Preliminary Marine Safety Risk Assessment, BRLD

Emerging Technologies for Environmental Remediation: Integrating Data and Judgment.

Science.gov (United States)

Bates, Matthew E; Grieger, Khara D; Trump, Benjamin D; Keisler, Jeffrey M; Plourde, Kenton J; Linkov, Igor

2016-01-05

Emerging technologies present significant challenges to researchers, decision-makers, industry professionals, and other stakeholder groups due to the lack of quantitative risk, benefit, and cost data associated with their use. Multi-criteria decision analysis (MCDA) can support early decisions for emerging technologies when data is too sparse or uncertain for traditional risk assessment. It does this by integrating expert judgment with available quantitative and qualitative inputs across multiple criteria to provide relative technology scores. Here, an MCDA framework provides preliminary insights on the suitability of emerging technologies for environmental remediation by comparing nanotechnology and synthetic biology to conventional remediation methods. Subject matter experts provided judgments regarding the importance of criteria used in the evaluations and scored the technologies with respect to those criteria. The results indicate that synthetic biology may be preferred over nanotechnology and conventional methods for high expected benefits and low deployment costs but that conventional technology may be preferred over emerging technologies for reduced risks and development costs. In the absence of field data regarding the risks, benefits, and costs of emerging technologies, structuring evidence-based expert judgment through a weighted hierarchy of topical questions may be helpful to inform preliminary risk governance and guide emerging technology development and policy.

Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

Science.gov (United States)

Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

2018-01-05

Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

Preliminary assessment of adjuster system performance in CANDU-6 RUFIC core

International Nuclear Information System (INIS)

Kim, Soon Young; Suk, Ho Chun

2002-07-01

Four operational transients in CANDU-6 RUFIC core have been simulated to assess the adjuster system performance. These transients included startup after a short shutdown, startup after a poison-out shutdown, shim mode operation, and a stepback to 60% full power. Also, an alternative adjuster-banking scheme has been assessed in this report. The alternative adjuster-banking scheme involves rods in Bank 1 and Bank 7 being re-distributed within the two banks. In the alternative adjuster-banking scheme, Bank 1 becomes the heaviest one. The results of the preliminary assessment indicated that the adjuster system as currently designed and installed in the NU core will adequately meet the functional requirements in the RUFIC core. Comparing to the adjuster system performance in the NU core, the total worth of the adjuster in the RUFIC core is reduced, leading to less xenon override capability and shimming capability. However, the overall performance is expected to still be satisfactory. The overall results from the transient studied indicated that the alternative banking scheme does show some better performance characteristics and merits further detailed studies

Current mHealth technologies for physical activity assessment and promotion.

Science.gov (United States)

O'Reilly, Gillian A; Spruijt-Metz, Donna

2013-10-01

Novel mobile assessment and intervention capabilities are changing the face of physical activity (PA) research. A comprehensive systematic review of how mobile technology has been used for measuring PA and promoting PA behavior change is needed. Article collection was conducted using six databases from February to June 2012 with search terms related to mobile technology and PA. Articles that described the use of mobile technologies for PA assessment, sedentary behavior assessment, and/or interventions for PA behavior change were included. Articles were screened for inclusion and study information was extracted. Analyses were conducted from June to September 2012. Mobile phone-based journals and questionnaires, short message service (SMS) prompts, and on-body PA sensing systems were the mobile technologies most utilized. Results indicate that mobile journals and questionnaires are effective PA self-report measurement tools. Intervention studies that reported successful promotion of PA behavior change employed SMS communication, mobile journaling, or both SMS and mobile journaling. mHealth technologies are increasingly being employed to assess and intervene on PA in clinical, epidemiologic, and intervention research. The wide variations in technologies used and outcomes measured limit comparability across studies, and hamper identification of the most promising technologies. Further, the pace of technologic advancement currently outstrips that of scientific inquiry. New adaptive, sequential research designs that take advantage of ongoing technology development are needed. At the same time, scientific norms must shift to accept "smart," adaptive, iterative, evidence-based assessment and intervention technologies that will, by nature, improve during implementation. © 2013 American Journal of Preventive Medicine.

Super-Efficient Refrigerator Program (SERP) evaluation volume 2: Preliminary impact and market transformation assessment

Energy Technology Data Exchange (ETDEWEB)

Lee, A.D.; Conger, R.L.

1996-08-01

The Super Efficient Refrigerator Program (SERP) is a collaborative utility program intended to transform the market for energy-efficient and environmentally friendly refrigerators. It is one of the first examples of a large-scale {open_quotes}market transformation{close_quotes} energy efficiency program. This report documents the preliminary impact and market transformation evaluation of SERP ({open_quotes}the Program{close_quotes}). Pacific Northwest National Laboratory (PNNL) conducted this evaluation for the U.S. Department of Energy. This study focuses on the preliminary impact evaluation and market transformation assessment, but also presents limited process evaluation information. It is based on interviews with refrigerator dealers and manufacturers, interviews with utility participants, industry data, and information from the Program administrators. Results from this study complement those from prior process evaluation also conducted by PNNL. 42 refs., 5 figs., 4 tabs.

Augmented Reality Tower Technology Assessment

Science.gov (United States)

Reisman, Ronald J.; Brown, David M.

2009-01-01

Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

Preliminary assessment report for Army Aviation Support Facility No. 3, Installation 13307, Hunter Army Airfield, Savannah, Georgia

International Nuclear Information System (INIS)

Kolpa, R.; Smith, K.

1993-07-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Georgia Army National Guard property located on Hunter Army Airfield (HAA) near Savannah, Georgia, known as Army Aviation Support Facility (AASF) No. 3. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, types and quantities of hazardous substances utilized, the nature and amounts of wastes generated or stored at the facility, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the AASF No. 3 property, requirements of the Department of Defense Installation Restoration Program (IRP). The scope of this assessment is limited to the facilities and past activities contained within the area now occupied by AASF No. 3. However, this assessment report is intended to be read in conjunction with a previous IRP assessment of HAA completed in 1992 (USATHAMA 1992) and to provide comprehensive information on AASF No. 3 for incorporation with information contained in that previous assessment for the entirety of HAA

Technology assessment for the anesthesiologist.

Science.gov (United States)

Abenstein, J P

2006-12-01

The expense associated with modern heath care in the United States is very high, in excess of 15% of the GDP, continues to grow and has become a significant public policy issue. New technologies, defined as all drugs, devices, procedures, and organizational systems, are major contributors to rising health care costs. The use of health technology assessment tools can assist those in leadership positions in making rational decisions as to which new technologies to adopt. The classical approach is to use data from prospective, randomized, clinical trials that compare the outcomes of those treated with the new technology and the accepted therapy. Using this information and detailed economic data, the cost-effectiveness ratio can be determined. The accepted metrics are either dollars per life year saved or dollars per quality-adjusted life year saved. If the new medical intervention costs less than $50,000 to 80,000 dollars per life year saved, it is considered to be cost-effective and worthy of adoption. This kind of analysis is complex and expensive. In addition, the required information is not always available, limiting the applicability of this approach. Finally, the economic analysis often includes down-stream expense and benefit not relevant from a medical center perspective. Another approach is to focus the analysis to what impacts the medical center. This includes determining whether the technology has received the necessary approvals and has been shown to be effective, to improve health outcomes, to be at least as effective as standard therapy, and to be achievable outside the investigative setting. A fiscal analysis also must be done to determine what will it cost to acquire and operate the technology, what are the anticipated patient volumes and payer mix, and what will be the down-stream consequences to the medical center. If the process concludes that the technology works, makes a positive difference to patient care, and is fiscally and operationally

Natural-technological risk assessment and management

Science.gov (United States)

Burova, Valentina; Frolova, Nina

2016-04-01

EM-DAT statistical data on human impact and economic damages in the 1st semester 2015 are the highest since 2011: 41% of disasters were floods, responsible for 39% of economic damage and 7% of events were earthquakes responsible for 59% of total death toll. This suggests that disaster risk assessment and management still need to be improved and stay the principle issue in national and international related programs. The paper investigates the risk assessment and management practice in the Russian Federation at different levels. The method is proposed to identify the territories characterized by integrated natural-technological hazard. The maps of the Russian Federation zoning according to the integrated natural-technological hazard level are presented, as well as the procedure of updating the integrated hazard level taking into account the activity of separate processes. Special attention is paid to data bases on past natural and technological processes consequences, which are used for verification of current hazard estimation. The examples of natural-technological risk zoning for the country and some regions territory are presented. Different output risk indexes: both social and economic, are estimated taking into account requirements of end-users. In order to increase the safety of population of the Russian Federation the trans-boundaries hazards are also taken into account.

Preliminary assessment of PWR Steam Generator modelling in RELAP5/MOD3

International Nuclear Information System (INIS)

Preece, R.J.; Putney, J.M.

1993-07-01

A preliminary assessment of Steam Generator (SG) modelling in the PWR thermal-hydraulic code RELAP5/MOD3 is presented. The study is based on calculations against a series of steady-state commissioning tests carried out on the Wolf Creek PWR over a range of load conditions. Data from the tests are used to assess the modelling of primary to secondary side heat transfer and, in particular, to examine the effect of reverting to the standard form of the Chen heat transfer correlation in place of the modified form applied in RELAP5/MOD2. Comparisons between the two versions of the code are also used to show how the new interphase drag model in RELAP5/MOD3 affects the calculation of SG liquid inventory and the void fraction profile in the riser

Knowledge in health technology assessment

DEFF Research Database (Denmark)

Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

2011-01-01

Health systems are placing more and more emphasis on designing and delivering services that are focused on the patient, and there is a growing interest in patient aspects of health policy research and health technology assessment (HTA). Only a few HTA agencies use and invest in scientific methods...... to generate knowledge and evidence about the patient aspects of a given technology. This raises questions about how knowledge is produced in HTA reports and what kind of knowledge is considered relevant. This article uses a Danish HTA on patient education from 2009 as empirical material for a critical...

An environmental assessment system for environmental technologies

DEFF Research Database (Denmark)

Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

2014-01-01

A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

The Office for Technology Assessment with the German Parliament (TAB)

International Nuclear Information System (INIS)

Grunwald, A.; Petermann, T.

2004-01-01

TAB was created in 1990 with the aim of providing contributions to the improvement of the information base, particularly for parliamentary decision-making concerning science and technology. Among TAB's tasks are above all the conception and execution of technology assessment projects and the monitoring and analysis of important scientific and technological trends and related societal developments. TAB is managed by the Institute for Technology Assessment and Systems Analysis (ITAS) of the Karlsruhe Research Center. (orig.)

Technical and economic assessments commercial success for IGCC technology in China

International Nuclear Information System (INIS)

Xiong, T.

1998-01-01

The experiences gained from several Integrated Gasification Combined Cycle (IGCC) demonstration plants operating in the US and Europe facilitate commercial success of this advanced coal-based power generation technology. However, commercialization of coal-based IGCC technology in the West, particularly in the US, is restricted due to the low price of natural gas. On the contrary, in China--the largest coal producer and consumer in the world--a lack of natural gas supply, strong demand for air pollution control and relatively low costs of manufacturing and construction provide tremendous opportunities for IGCC applications. The first Chinese IGCC demonstration project was initiated in 1994, and other potential IGCC projects are in planning. IGCC applications in re-powering, fuel switching and multi-generation also show a great market potential in China. However, questions for IGCC development in China remain; where are realistic opportunities for IGCC projects and how can these opportunities be converted into commercial success? The answers to these questions should focus on the Chinese market needs and emphasize economic benefits, not just clean, or power. High price of imported equipment, high financing costs, and the technical risk of first-of-a-kind installation barricade IGCC development in China. This paper presents preliminary technical and economic assessments for four typical IGCC applications in the Chinese marketplace: central power station, fuel switching, re-powering, and multi-generation. The major factors affecting project economics--such as plant cost, financing, prices of fuel and electricity and operating capacity factor--are analyzed. The results indicate that well-proven technology for versatile applications, preferred financing, reduction of the plant cost, environmental superiority and appropriate project structure are the key for commercial success of IGCC in China

Preliminary needs assessment of mobile technology use for healthcare among homeless veterans.

Science.gov (United States)

McInnes, D Keith; Fix, Gemmae M; Solomon, Jeffrey L; Petrakis, Beth Ann; Sawh, Leon; Smelson, David A

2015-01-01

Background. Homeless veterans have complex healthcare needs, but experience many barriers to treatment engagement. While information technologies (IT), especially mobile phones, are used to engage patients in care, little is known about homeless veterans' IT use. This study examines homeless veterans' access to and use of IT, attitudes toward health-related IT use, and barriers to IT in the context of homelessness. Methods. Qualitative interviews were conducted with 30 homeless veterans in different housing programs in Boston, MA, ranging from emergency shelters to supportive transitional housing that allow stays of up to 2 years. Interviews were conducted in person, audio recorded and then transcribed. Three researchers coded transcripts. Inductive thematic analysis was used. Results. Most participants (90%) had a mobile phone and were receptive to IT use for health-related communications. A common difficulty communicating with providers was the lack of a stable mailing address. Some participants were using mobile phones to stay in touch with providers. Participants felt mobile-phone calls or text messages could be used to remind patients of appointments, prescription refills, medication taking, and returning for laboratory results. Mobile phone text messaging was seen as convenient, and helped participants stay organized because necessary information was saved in text messages. Some reported concerns about the costs associated with mobile phone use (calls and texting), the potential to be annoyed by too many text messages, and not knowing how to use text messaging. Conclusion. Homeless veterans use IT and welcome its use for health-related purposes. Technology-assisted outreach among this population may lead to improved engagement in care.

Development of safety related technology and infrastructure for safety assessment

International Nuclear Information System (INIS)

Venkat Raj, V.

1997-01-01

Development and optimum utilisation of any technology calls for the building up of the necessary infrastructure and backup facilities. This is particularly true for a developing country like India and more so for an advanced technology like nuclear technology. Right from the inception of its nuclear power programme, the Indian approach has been to develop adequate infrastructure in various areas such as design, construction, manufacture, installation, commissioning and safety assessment of nuclear plants. This paper deals with the development of safety related technology and the relevant infrastructure for safety assessment. A number of computer codes for safety assessment have been developed or adapted in the areas of thermal hydraulics, structural dynamics etc. These codes have undergone extensive validation through data generated in the experimental facilities set up in India as well as participation in international standard problem exercises. Side by side with the development of the tools for safety assessment, the development of safety related technology was also given equal importance. Many of the technologies required for the inspection, ageing assessment and estimation of the residual life of various components and equipment, particularly those having a bearing on safety, were developed. This paper highlights, briefly, the work carried out in some of the areas mentioned above. (author)

ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

Science.gov (United States)

Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

2018-06-13

The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

Assessment of nuclear fuel reprocessing

International Nuclear Information System (INIS)

1975-09-01

The status of technology and the regulatory situation are summarized; the level of Federal support believed to be necessary to ensure that the nuclear option plays its role in the National Energy Plan is estimated. The assessment is based on a review of the open literature (no proprietary information), preliminary economic calculations, and experience of the Du Pont staff in the design, construction, and operation of nuclear facilities at Hanford and Savannah River. Because of the limited time available for the review, the conclusions and recommendations are preliminary, but they should provide an appropriate point of departure for planning purposes. A summary of recommendations and conclusions is provided at the beginning of the report, a current status of the applicable technology is given in Appendix B, and a glossary of terms is provided at the end of the report

MRI assessment program

International Nuclear Information System (INIS)

1987-09-01

The MRI Assessment Program involves installation and operation of five MRI units in Australian public hospitals and the evaluation at each unit of the cost and efficacy of the technology over a period of two years. This first report in a series presents preliminary usage and cost data for the year to 30 June 1987 as well as describing the background and the data set. 6 figs., tabs

Preliminary Risk Assessment of the Southwestern Willow Flycatcher (Empidonax traillii extimus) at the Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Gallegos, A.F.; Gonzales, G.J.; Bennett, K.D.; Mullen, M.A.; Foxx, T.S.

1998-10-01

The southwestern willow flycatcher (Empidonax traillii extimus) is the fourth threatened or endangered species to undergo a preliminary assessment for estimating potential risk from environmental contaminants at the Los Alamos National Laboratory. The assessments are being conducted as part of a three-year project to develop a habitat management plan for threatened and endangered species and species of concern at the Laboratory. For the preliminary assessment, estimated doses were compared against toxicity reference values to generate hazard indices (HIs). This assessment included a measure of cumulative effects from multiple contaminants (radionuclides, metals, and organic chemicals) to 100 simulated nest sites located within flycatcher potential habitat. Sources of contaminant values were 10,000-ft{sup 2} grid cells within an Ecological Exposure Unit (EEU). This EEU was estimated around the potential habitat and was based on the maximum home range for the fly catcher identified in the scientific literature. The tools used included a custom FORTRAN program, ECORSK5, and a geographic information system. Food consumption and soil ingestion contaminant pathways were addressed in the assessment. Using a four-category risk evaluation, HI results indicate no appreciable impact is expected to the southwestern willow flycatcher. Information on risk by specific geographical location was generated, which can be used to manage contaminated areas, flycatcher habitat, facility siting, and/or facility operations in order to maintain low levels of risk from contaminants.

Preliminary Risk Assessment of the Southwestern Willow Flycatcher (Empidonax traillii extimus) at the Los Alamos National Laboratory

International Nuclear Information System (INIS)

Gallegos, A.F.; Gonzales, G.J.; Bennett, K.D.; Mullen, M.A.; Foxx, T.S.

1998-01-01

The southwestern willow flycatcher (Empidonax traillii extimus) is the fourth threatened or endangered species to undergo a preliminary assessment for estimating potential risk from environmental contaminants at the Los Alamos National Laboratory. The assessments are being conducted as part of a three-year project to develop a habitat management plan for threatened and endangered species and species of concern at the Laboratory. For the preliminary assessment, estimated doses were compared against toxicity reference values to generate hazard indices (HIs). This assessment included a measure of cumulative effects from multiple contaminants (radionuclides, metals, and organic chemicals) to 100 simulated nest sites located within flycatcher potential habitat. Sources of contaminant values were 10,000-ft 2 grid cells within an Ecological Exposure Unit (EEU). This EEU was estimated around the potential habitat and was based on the maximum home range for the fly catcher identified in the scientific literature. The tools used included a custom FORTRAN program, ECORSK5, and a geographic information system. Food consumption and soil ingestion contaminant pathways were addressed in the assessment. Using a four-category risk evaluation, HI results indicate no appreciable impact is expected to the southwestern willow flycatcher. Information on risk by specific geographical location was generated, which can be used to manage contaminated areas, flycatcher habitat, facility siting, and/or facility operations in order to maintain low levels of risk from contaminants

Preliminary Economic Assessment of KALIMER-600

International Nuclear Information System (INIS)

Moon, Kee-Hwan; Kim, Seung-Su; Hahn, Do-Hee

2008-01-01

The GIF(GEN IV International Forum) established an Economic Modelling Working Group(EMWG) in 2003 to create economic models and guidelines to facilitate in a future evaluation of the Generation IV nuclear energy systems and assess progress toward the GIF economic goals. These goals are to have a life cycle cost advantage over other energy sources, and to have a level of financial risk comparable to other energy projects. To do this, EMWG has been developed the G4-ECONS model, which is a generic EXCEL-based model for computation of the projected levelized unit electricity cost and/or levelized non-electricity unit product cost from GEN IV energy systems. KALIMER-600 has been developed as a new design concept based on the KALIMER-150 design. KALIMER-600 is a unique design concept which has a potential to achieve GEN IV technology goals even though there is a room for a design improvement in order to make the KALIMER-600 more competitive with future generation reactors. The objective of this study is to the assess economics of KALIMER-600 by using the G4-ECONS model

Affordable Development and Demonstration of a Small NTR Engine and Stage: A Preliminary NASA, DOE, and Industry Assessment

Science.gov (United States)

Borowski, Stanley K.; Sefcik, Robert J.; Fittje, James E.; McCurdy, David R.; Qualls, Arthur L.; Schnitzler, Bruce G.; Werner, James E.; Weitzberg, Abraham; Joyner, Claude R.

2015-01-01

The Nuclear Thermal Rocket (NTR) represents the next evolutionary step in cryogenic liquid rocket engines. Deriving its energy from fission of uranium-235 atoms contained within fuel elements that comprise the engine's reactor core, the NTR can generate high thrust at a specific impulse of approx. 900 seconds or more - twice that of today's best chemical rockets. In FY'11, as part of the AISP project, NASA proposed a Nuclear Thermal Propulsion (NTP) effort that envisioned two key activities - "Foundational Technology Development" followed by system-level "Technology Demonstrations". Five near-term NTP activities identified for Foundational Technology Development became the basis for the NCPS project started in FY'12 and funded by NASA's AES program. During Phase 1 (FY'12-14), the NCPS project was focused on (1) Recapturing fuel processing techniques and fabricating partial length "heritage" fuel elements for the two candidate fuel forms identified by NASA and the DOE - NERVA graphite "composite" and the uranium dioxide (UO2) in tungsten "cermet". The Phase 1 effort also included: (2) Engine Conceptual Design; (3) Mission Analysis and Requirements Definition; (4) Identification of Affordable Options for Ground Testing; and (5) Formulation of an Affordable and Sustainable NTP Development Strategy. During FY'14, a preliminary plan for DDT&E was outlined by GRC, the DOE and industry for NASA HQ that involved significant system-level demonstration projects that included GTD tests at the NNSS, followed by a FTD mission. To reduce development costs, the GTD and FTD tests use a small, low thrust (approx. 7.5 or 16.5 klbf) engine. Both engines use graphite composite fuel and a "common" fuel element design that is scalable to higher thrust (approx. 25 klbf) engines by increasing the number of elements in a larger diameter core that can produce greater thermal power output. To keep the FTD mission cost down, a simple "1-burn" lunar flyby mission was considered along with

Where’s the Transformation? Unlocking the Potential of Technology-Enhanced Assessment

Directory of Open Access Journals (Sweden)

Trudy Sweeney

2017-03-01

Full Text Available This study provides insight into technology-enhanced assessment (TEA in diverse higher education contexts. The effectiveness of using technology for assessment in higher education is still equivocal, particularly in regard to evidence of improvements in student learning. This empirical research explores the affordances that technology offers to assessment for transforming student learning. A systematic literature review, guided by an analytic survey tool, was used to identify and interrogate recent scholarly articles published in 19 international journals. From a total of 1713 articles, 139 articles were identified as being focused on the use of technology for assessment. The analytic tool guided the rigorous exploration of the literature regarding the types of technology being used, the educational goal, the type of assessment, and the degree of “transformation” afforded by the technology. Results showed that, in the sample investigated, TEA is used most frequently for formative peer learning, as part of the task design and feedback stages of the assessment cycle, and that social media has been a major affordance for this. Results are discussed with a view to fostering a future culture of inquiry and scholarship around TEA in higher education.

Preliminary needs assessment of mobile technology use for healthcare among homeless veterans

Directory of Open Access Journals (Sweden)

D. Keith McInnes

2015-07-01

Full Text Available Background. Homeless veterans have complex healthcare needs, but experience many barriers to treatment engagement. While information technologies (IT, especially mobile phones, are used to engage patients in care, little is known about homeless veterans’ IT use. This study examines homeless veterans’ access to and use of IT, attitudes toward health-related IT use, and barriers to IT in the context of homelessness.Methods. Qualitative interviews were conducted with 30 homeless veterans in different housing programs in Boston, MA, ranging from emergency shelters to supportive transitional housing that allow stays of up to 2 years. Interviews were conducted in person, audio recorded and then transcribed. Three researchers coded transcripts. Inductive thematic analysis was used.Results. Most participants (90% had a mobile phone and were receptive to IT use for health-related communications. A common difficulty communicating with providers was the lack of a stable mailing address. Some participants were using mobile phones to stay in touch with providers. Participants felt mobile-phone calls or text messages could be used to remind patients of appointments, prescription refills, medication taking, and returning for laboratory results. Mobile phone text messaging was seen as convenient, and helped participants stay organized because necessary information was saved in text messages. Some reported concerns about the costs associated with mobile phone use (calls and texting, the potential to be annoyed by too many text messages, and not knowing how to use text messaging.Conclusion. Homeless veterans use IT and welcome its use for health-related purposes. Technology-assisted outreach among this population may lead to improved engagement in care.

Wind power in Eritrea, Africa: A preliminary resource assessment

Energy Technology Data Exchange (ETDEWEB)

Garbesi, K.; Rosen, K. [San Jose State Univ., CA (United States); Van Buskirk, R. [Dept. of Energy, Eritrea (Ethiopia)

1997-12-31

The authors preliminary assessment of Eritrean wind energy potential identified two promising regions: (1) the southeastern Red Sea coast and (2) the mountain passes that channel winds between the coastal lowlands and the interior highlands. The coastal site, near the port city of Aseb, has an exceptionally good resource, with estimated average annual wind speeds at 10-m height above 9 m/s at the airport and 7 m/s in the port. Furthermore, the southern 200 km of coastline has offshore WS{sub aa} > 6 m/s. This area has strong potential for development, having a local 20 MW grid and unmet demand for the fishing industry and development. Although the highland sites contain only marginal wind resources ({approximately} 5 m/s), they warrant further investigation because of their proximity to the capital city, Asmera, which has the largest unmet demand and a larger power grid (40 MW with an additional 80 MW planned) to absorb an intermittent source without storage.

A preliminary assessment of the Titan planetary boundary layer

Science.gov (United States)

Allison, Michael

1992-01-01

Results of a preliminary assessment of the characteristic features of the Titan planetary boundary are addressed. These were derived from the combined application of a patched Ekman surface layer model and Rossby number similarity theory. Both these models together with Obukhov scaling, surface speed limits and saltation are discussed. A characteristic Akman depth of approximately 0.7 km is anticipated, with an eddy viscosity approximately equal to 1000 sq cm/s, an associated friction velocity approximately 0.01 m/s, and a surface wind typically smaller than 0.6 m/s. Actual values of these parameters probably vary by as much as a factor of two or three, in response to local temporal variations in surface roughness and stability. The saltation threshold for the windblown injection of approximately 50 micrometer particulates into the atmosphere is less than twice the nominal friction velocity, suggesting that dusty breezes might be an occassional feature of the Titan meteorology.

Expanding the applicability of Heallth Technology Assessments

DEFF Research Database (Denmark)

Draborg, Eva; Hansen, Helle Ploug

2012-01-01

The objective of the presentation is to expand the foundations of input into policy decision making relying on health technology assessments (HTA). HTAs are primarily based on systematic reviews (SR) and thereby mostly on randomized controlled trials (RCT). RCTs can be distinguished on a continuum...... between explanatory and pragmatic trials according to their level of control over variables in the study besides the examined technology. In explanatory trials emphasis are placed on internal validity in order to test the efficacy of a technology under ideal conditions while pragmatic trials emphasizes...... external validity and the effectiveness of a technology in normal daily practice. SR and HTAs favors internal valid trials and thereby proofs of possible cause-effect relationship between a technology and outcomes but at the expense of the wider perspectives of a technology. HTA have a policy...

Site Characterization and Preliminary Performance Assessment Calculation Applied To JAEA-Horonobe URL Site of Japan

International Nuclear Information System (INIS)

Lim, Doo Hyun; Hatanaka, Koichiro; Ishii, Eiichi

2010-01-01

JAEA-Horonobe Underground Research Laboratory (URL) is designed for research and development on high-level radioactive waste (HLW) repository in sedimentary rock. For a potential HLW repository, understanding and implementing fracturing and faulting system, with data from the site characterization, into the performance assessment is essential because fracture and fault will be the major conductors or barriers for the groundwater flow and radionuclide release. The objectives are i) quantitative derivation of characteristics and correlation of fracturing/faulting system with geologic and geophysics data obtained from the site characterization, and ii) preliminary performance assessment calculation with characterized site information

Site Characterization and Preliminary Performance Assessment Calculation Applied To JAEA-Horonobe URL Site of Japan

Energy Technology Data Exchange (ETDEWEB)

Lim, Doo Hyun [NE Union Hill Road, Suite 200, WA 98052 (United States); Hatanaka, Koichiro; Ishii, Eiichi [Japan Atomic Energy Agency, Hokkaido (Japan)

2010-10-15

JAEA-Horonobe Underground Research Laboratory (URL) is designed for research and development on high-level radioactive waste (HLW) repository in sedimentary rock. For a potential HLW repository, understanding and implementing fracturing and faulting system, with data from the site characterization, into the performance assessment is essential because fracture and fault will be the major conductors or barriers for the groundwater flow and radionuclide release. The objectives are i) quantitative derivation of characteristics and correlation of fracturing/faulting system with geologic and geophysics data obtained from the site characterization, and ii) preliminary performance assessment calculation with characterized site information

Reactor technology assessment and selection utilizing systems engineering approach

Science.gov (United States)

Zolkaffly, Muhammed Zulfakar; Han, Ki-In

2014-02-01

The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

Preliminary Analysis and Selection of Mooring Solution Candidates

DEFF Research Database (Denmark)

Thomsen, Jonas Bjerg; Delaney, Martin

This report covers a preliminary analysis of mooring solutions candidates for four large floating wave energy converters. The work is part of the EUDP project “Mooring Solutions for Large Wave Energy Converters” and is the outcome of "Work Package 3: Preliminary Analysis". The report further...... compose the "Milestone 4: Report on results of preliminary analysis and selection of final candidates. The report is produced by Aalborg University with input from the partner WECs Floating Power Plant, KNSwing, LEANCON and Wave Dragon. Tension Technology International (TTI) has provided a significant...

Assessment of selected furnace technologies for RWMC waste

International Nuclear Information System (INIS)

Batdorf, J.; Gillins, R.; Anderson, G.L.

1992-03-01

This report provides a description and initial evaluation of five selected thermal treatment (furnace) technologies, in support of earlier thermal technologies scoping work for application to the Idaho National Engineering Laboratory Radioactive Waste Management Complex (RWMC) buried wastes. The cyclone furnace, molten salt processor, microwave melter, ausmelt (fuel fired lance) furnace, and molten metal processor technologies are evaluated. A system description and brief development history are provided. The state of development of each technology is assessed, relative to treatment of RWMC buried waste

How to make participatory technology assessment in agriculture more 'participatory'

DEFF Research Database (Denmark)

Tavella, Elena

2016-01-01

the cultivation of new GM plants in Denmark. Furthermore, through this illustration, the term Participatory Technology Assessment (PTA) is redefined, thereby suggesting two additional aspects to assessing new technologies – following and evaluating policy making – to be considered in the conduct of PTA....

Technology-Enhanced Formative Assessment: A Research-Based Pedagogy for Teaching Science with Classroom Response Technology

Science.gov (United States)

Beatty, Ian D.; Gerace, William J.

2009-01-01

"Classroom response systems" (CRSs) are a promising instructional technology, but most literature on CRS use fails to distinguish between technology and pedagogy, to define and justify a pedagogical perspective, or to discriminate between pedagogies. "Technology-enhanced formative assessment" (TEFA) is our pedagogy for CRS-based science…

The Update of the Mexican Health Care Formulary and Supply Catalog in the Context of the Health Technology Assessment.

Science.gov (United States)

Ríos, Pedro Rizo; Rivera, Aurora González; Oropeza, Itzel Rivas; Ramírez, Odette Campos

2014-12-01

One of the instruments Mexico has available for the optimization of resources specifically allocated to health technologies is the Health Care Formulary and Supply Catalog (Cuadro Básico y Catálogo de Insumos del Sector Salud [CBCISS]). The aim of the CBCISS is to collaborate in the optimization of public resources through the use of technologies (supplies) that have proven their safety, therapeutic efficacy, and efficiency. The importance of the CBCISS lies in the fact that all public institutions within the National Health System must use only the established technologies it contains. The implementation of strategies that strengthen the CBCISS update process allows it to be thought of as an essential regulatory tool for the introduction of health technologies, with relevant contributions to the proper selection of cost-effective interventions. It ensures that each supply included on the list meets the criteria sufficient and necessary to ensure efficacy, safety, effectiveness, and, of course, efficiency, as evidence supporting the selection of suitable technologies. The General Health Council (Consejo de Salubridad General [CSG]) is a collegial body of constitutional origin that-in accordance with its authority-prepares, updates, publishes, and distributes the CBCISS. To perform these activities, the CSG has the CBCISS Inter-institutional Commission. The CBCISS update is performed through the processes of inclusion, modification, and exclusion of supplies approved by the Interior Commission. The CBCISS update process consists of three stages: the first stage involves a test that leads to the acceptance or inadmissibility of the requests, and the other two focus on an in-depth evaluation for the ruling. This article describes the experience of health technology assessment in Mexico, presents the achievements and outlines the improvements in the process of submission of new health technologies, and presents a preliminary analysis of the submissions evaluated

Smart gun technology requirements preliminary report

Energy Technology Data Exchange (ETDEWEB)

Weiss, D.R.; Brandt, D.J.; Tweet, K.D.

1995-05-01

Goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing user-recognizing-and-authorizing surety technologies. This project is funded by the National Institute of Justice. This document reports the projects first objective: to find and document the requirements for a user-recognizing-and-authorizing firearm technology that law enforcement officers will value. This report details the problem of firearm takeaways in law enforcement, the methodology used to develop the law enforcement officers` requirements, and the requirements themselves.

A preliminary strategic environmental impact assessment of mineral and hydrocarbon activities on the Nuussuaq peninsula, West Greenland

Energy Technology Data Exchange (ETDEWEB)

Boertmann, D.; Asmund, G.; Glahder, C.; Tamstorf, M.

2008-01-15

There is an increasing interest for mineral and hydrocarbon exploration in Greenland and in both regards the Nuussuaq peninsula is in focus. This preliminary strategic environmental impact assessment describes the status of the biological knowledge from the area and designates potential conflicts between activities and the biological environment. Furthermore biological knowledge gaps are identified. These should be filled before specific environmental impacts assessments can be carried out and relevant studies to fill these data gaps are proposed. (au)

Technology assessment - a workable way out of the 'risk society'?

International Nuclear Information System (INIS)

Mueller-Brandeck-Bocquet, G.

1988-01-01

On the basis of concrete experience and results in the risk assessment process concerning nuclear technology in the Federal Republic of Germany it becomes apparent that technology asessment can make a contribution towards the required technology domestication. The 'risk management' of the circle of nuclear power generators and the consulting and licensing bodies having failed, a new phase of technology assessment began in 1970, whereby proponents and opponents of nuclear energy had a say. Parallel research on the safety of light water reactors and fast breeders gave valuable insight into the danger potential of nuclear energy while the latent risk of technology assessment misuse became apparent in the decision-finding process concerning the problem of radioactive waste management. In the end it were the Enquete Commission 'Future Nuclear Energy Policy' of the German Bundestag and the studies on social agreeability of energy supply systems which resulted in the perspective of a future without the use of nuclear power being a realistic option. The general findings of technology assessment, e.g. the cognition that there can be no scientific decision in favour of assuming responsibility for nuclear energy, opens up new views and possibilities for acting for the decision-makers in the field of energy policy. (orig./HSCH) [de

Risk assessment and societal choices

Energy Technology Data Exchange (ETDEWEB)

Otway, H J

1975-02-15

Many countries are experiencing a period in which traditional values are being questioned; plans for further technological progress are being met by a variety of demands for a closer examination of the benefits and risks of large-scale technologies. In this paper the concepts of risk assessment are presented and a model is proposed which illustrates the importance of socio-psychological mechanisms in the acceptance of technological risks. The research plan of the Joint IAEA/IIASA Research Project is outlined: this work is directed toward gaining an improved understanding of how societies judge the acceptability of technologies and how societal attitudes and anticipated responses may be better integrated into the decision-making process. Some preliminary results are reported. (author)

Risk assessment and societal choices

International Nuclear Information System (INIS)

Otway, H.J.

1975-01-01

Many countries are experiencing a period in which traditional values are being questioned; plans for further technological progress are being met by a variety of demands for a closer examination of the benefits and risks of large-scale technologies. In this paper the concepts of risk assessment are presented and a model is proposed which illustrates the importance of socio-psychological mechanisms in the acceptance of technological risks. The research plan of the Joint IAEA/IIASA Research Project is outlined: this work is directed toward gaining an improved understanding of how societies judge the acceptability of technologies and how societal attitudes and anticipated responses may be better integrated into the decision-making process. Some preliminary results are reported. (author)

Ecological Momentary Assessment in Behavioral Research: Addressing Technological and Human Participant Challenges.

Science.gov (United States)

Burke, Lora E; Shiffman, Saul; Music, Edvin; Styn, Mindi A; Kriska, Andrea; Smailagic, Asim; Siewiorek, Daniel; Ewing, Linda J; Chasens, Eileen; French, Brian; Mancino, Juliet; Mendez, Dara; Strollo, Patrick; Rathbun, Stephen L

2017-03-15

completing EMA surveys was high, with 88.3% (66,978/75,888) completion of random assessments and around 90% (23,411/25,929 and 23,343/26,010) completion of time-contingent assessments, despite the duration of EMA data collection and challenges with implementation. This work informed us of the necessary preliminary steps to plan and prepare a longitudinal study using smartphone technology and the critical elements to ensure participant engagement in the potentially burdensome protocol, which spanned 12 months. While this was a technology-supported and -programmed study, it required close oversight to ensure all elements were functioning correctly, particularly once human participants became involved. ©Lora E Burke, Saul Shiffman, Edvin Music, Mindi A Styn, Andrea Kriska, Asim Smailagic, Daniel Siewiorek, Linda J Ewing, Eileen Chasens, Brian French, Juliet Mancino, Dara Mendez, Patrick Strollo, Stephen L Rathbun. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 15.03.2017.

Preliminary assessment report for Grubbs/Kyle Training Center, Smyrna/Rutherford County Regional Airport, Installation 47340, Smyrna, Tennessee. Installation Restoration Program

Energy Technology Data Exchange (ETDEWEB)

Dennis, C.; Stefano, J.

1993-07-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Tennessee Army National Guard (TNARNG) property near Smyrna, Tennessee. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Grubbs/Kyle Training Center property, the requirement of the Department of Defense Installation Restoration Program.

Assessment of Sensor Technologies for Advanced Reactors

Energy Technology Data Exchange (ETDEWEB)

Korsah, Kofi [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vlim, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Britton, Jr, Charles L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wootan, D. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Anheier, Jr, N. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Diaz, A. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, E. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chien, H. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Sheen, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Bakhtiari, Sasan [Argonne National Lab. (ANL), Argonne, IL (United States); Gopalsami, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Heifetz, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Tam, S. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Park, Y. [Argonne National Lab. (ANL), Argonne, IL (United States); Upadhyaya, B. R. [Univ. of Tennessee, Knoxville, TN (United States); Stanford, A. [Univ. of Tennessee, Knoxville, TN (United States)

2016-10-01

Sensors and measurement technologies provide information on processes, support operations and provide indications of component health. They are therefore crucial to plant operations and to commercialization of advanced reactors (AdvRx). This report, developed by a three-laboratory team consisting of Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL), provides an assessment of sensor technologies and a determination of measurement needs for AdvRx. It provides the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program and contributes to the design and implementation of AdvRx concepts.

UVISS preliminary visibility analysis

DEFF Research Database (Denmark)

Betto, Maurizio

1998-01-01

The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part of the w......The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...... of the work is also to setup the kernel of a software tool for the visibility analysis thatshould be easily expandable to consider more complex strucures for future activities.This analysis is part of the UVISS assessment study and it is meant to provide elementsfor the definition and the selection...

Technology Audit: Assessment of Innovative Portfolio

Directory of Open Access Journals (Sweden)

Kurushina Viktoria

2016-01-01

Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

Zero-emission vehicle technology assessment. Final report

Energy Technology Data Exchange (ETDEWEB)

Woods, T.

1995-08-01

This is the final report in the Zero-Emission Vehicle (ZEV) Technology Assessment, performed for NYSERDA by Booz-Allen & Hamilton Inc. Booz-Allen wrote the final report, and performed the following tasks as part of the assessment: assembled a database of key ZEV organizations, their products or services, and plans; described the current state of ZEV technologies; identified barriers to widespread ZEV deployment and projected future ZEV technical capabilities; and estimated the cost of ZEVs from 1998 to 2004. Data for the ZEV Technology Assessment were obtained from several sources, including the following: existing ZEV industry publications and Booz-Allen files; major automotive original equipment manufacturers; independent electric vehicle manufacturers; battery developers and manufacturers; infrastructure and component developers and manufacturers; the U.S. Department of Energy, the California Air Resources Board, and other concerned government agencies; trade associations such as the Electric Power Research Institute and the Electric Transportation Coalition; and public and private consortia. These sources were contacted by phone, mail, or in person. Some site visits of manufacturers also were conducted. Where possible, raw data were analyzed by Booz-Allen staff and/or verified by independent sources. Performance data from standardized test cycles were used as much as possible.

Evaluation of Smart Gun Technologies preliminary report

Energy Technology Data Exchange (ETDEWEB)

Weiss, D.R.

1996-01-01

The Smart Gun Technology Project has a goal to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing {open_quote}smart{close_quote} technologies. Smart technologies are those that can in some manner identify an officer. This report will identify, describe, and grade various technologies as compared to the requirements that were obtained from officers. This report does not make a final recommendation for a smart gun technology, nor does it give the complete design of a smart gun system.

Economical-environmental assessment on technologies producing electric energy

International Nuclear Information System (INIS)

Najafzadeh, K.

2000-01-01

Currently, the electric power industry is undergoing substantial regulatory and organizational change with respect to economical and environmental aspects. Under these circumstances, with utilization of analytic hierarchy process (AHP) concept, we consider the assessment of Technologies producing energy from financial and pollution viewpoint. AHP techniques is one of the efficient methods in analysis of complex and multi-criteria problems, which has plenty of applications. General pattern of this assessment has been introduced, and the main goal is determining of overall priority weights for each technology. With using this pattern, overall priority weights has been determined for thermal, combined cycle and Gas turbine plants. It has been cleared that relative priority of these plants will change, if relative priority of assessment criterions changes. For application of this approach, capital budgeting process and selection of some suitable technologies among the alternatives candidate for construction have been presented. In this process the objective is to maximize the sum of overall priority weights of technologies which have been identified from AHP. Constraints are about the construction budget and annual budget for emission allowances. This process is in the integer programming IP form an has been applied to three kind of power plants with reasonable assumptions

Multiple criteria decision analysis for health technology assessment.

Science.gov (United States)

Thokala, Praveen; Duenas, Alejandra

2012-12-01

Multicriteria decision analysis (MCDA) has been suggested by some researchers as a method to capture the benefits beyond quality adjusted life-years in a transparent and consistent manner. The objectives of this article were to analyze the possible application of MCDA approaches in health technology assessment and to describe their relative advantages and disadvantages. This article begins with an introduction to the most common types of MCDA models and a critical review of state-of-the-art methods for incorporating multiple criteria in health technology assessment. An overview of MCDA is provided and is compared against the current UK National Institute for Health and Clinical Excellence health technology appraisal process. A generic MCDA modeling approach is described, and the different MCDA modeling approaches are applied to a hypothetical case study. A comparison of the different MCDA approaches is provided, and the generic issues that need consideration before the application of MCDA in health technology assessment are examined. There are general practical issues that might arise from using an MCDA approach, and it is suggested that appropriate care be taken to ensure the success of MCDA techniques in the appraisal process. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Preliminary assessment of the possibility of supporting the decomposition of biodegradable packaging

Directory of Open Access Journals (Sweden)

Niekraś Lidia

2017-01-01

Full Text Available This article presents a preliminary evaluation of the possibility of using grass biomass from a sports field as a compost ingredient which positively affects the degree of decomposition of the biodegradable wrappings. For 5 months the biodegradable bags were stored, both empty and filled with organic waste in the heap of grass clippings. After that period, fragments of the bags were observed under the microscope and then assessed the state of their decomposition. The results indicate that the biomass used favourably affected the process of bag degradation, however the speed of decomposition of the empty bags was quicker than the bags filled with the organic waste.

Assessment vs. appraisal of ethical aspects of health technology assessment: can the distinction be upheld?

Directory of Open Access Journals (Sweden)

Sandman, Lars

2014-11-01

Full Text Available [english] An essential component of health technology assessment (HTA is the assessment of ethical aspects. In some healthcare contexts, tasks are strictly relegated to different expert groups: the HTA-agencies are limited to assessment of the technology and other actors within the health care sector are responsible for appraisal and recommendations. Ethical aspects of health technologies are considered with reference to values or norms in such a way that may be prescriptive, or offer guidance as to how to act or relate to the issue in question. Given this internal prescriptivity, the distinction between assessment and appraisal seems difficult to uphold, unless the scrutiny stops short of a full ethical analysis of the technology. In the present article we analyse the distinction between assessment and appraisal, using as an example ethical aspects of implementation of GPS-bracelets for people with dementia. It is concluded that for HTA-agencies with a strictly delineated assessment role, the question of how to deal with the internal prescriptivity of ethics may be confusing. A full ethical analysis might result in a definite conclusion as to whether the technology in question is ethically acceptable or not, thereby limiting choices for decision-makers, who are required to uphold certain ethical values and norms. At the same time, depending on the exact nature of such a conclusion, different action strategies can be supported. A positive appraisal within HTA could result in a decision on implementation, or of the technology, thereby making it available to patients, or decisions to and even the use of the technology (even if someone else will have to fund it. A neutral appraisal, giving no definite answer as to whether implementation is recommended or not, could result in a towards the technology. A negative appraisal could result in a decision to or even implementation. This paper presents an overview of the implications of different outcomes

Rapid Technology Assessment Framework for Land Logistics

Science.gov (United States)

2015-03-01

Economy, Environment, Politics SWOT Strengths, Weaknesses, Opportunities, Threats TRL Technology Readiness Level US United States WHO World Health...process fills one with the hope of great things to come. From 3-D printed organs to self-assembling asteroid -mining robots, the solution to all the...one to assess the relevant advantages of the new technologies compared to the current systems. For example, if we are considering investment in a

Preliminary safety assessment study for the conceptual design of a repository in tuff at Yucca Mountain

International Nuclear Information System (INIS)

Jackson, J.L.; Gram, H.F.; Hong, K.J.; Ng, H.S.; Pendergrass, A.M.

1984-12-01

Preliminary estimates of the upper bounds on postulated worst-case radiological releases resulting from possible accidents during the operating period of a prospective repository in tuff at Yucca Mountain are presented. Possible disrupting events are screened to identify the accidents of greatest potential consequence. The radiological dose commitments for the general public and repository personnel are estimated for postulated releases caused by natural phenomena, man-made events, and operational accidents. All postulated worst-case releases result in doses to the public that are lower than the 0.5-rem, whole-body dose-per-accident limit set by the Nuclear Regulatory Commission (NRC) in 10 CFR 60. Doses to repository personnel are within the NRC's 5.0-rem/yr occupational exposure limit set in 10 CFR 20 for normal operations. Doses are within this limit for all accidents except the transportation accident and fire in a drift. A preliminary risk assessment has also been performed. Based on this preliminary safety study, the proposed site boundaries and design criteria routinely used in constructing nuclear facilities appear to be adequate to protect the safety of the general public during the operating phase of the repository

Health technology assessment in Mexico.

Science.gov (United States)

Gómez-Dantés, Octavio; Frenk, Julio

2009-07-01

The history of health technology assessment (HTA) in Mexico is examined, starting with the efforts to incorporate this topic into the policy agenda and culminating with the recent creation of a specialized public agency. Information was gathered through a bibliographic search and interviews with actors involved in HTA in Mexico. HTA efforts were developed in Mexico since the mid-1980s with the participation both of academics and of policy makers, a relationship that eventually led to the creation of the Center for Technological Excellence within the Ministry of Health. Institutionalization of HTA in resource-constrained settings requires the development of a critical mass of researchers involved in this field, the implementation of information efforts, and the establishment of strong relationships between HTA experts and policy makers.

Q46 Technology Refreshment Assessment

Science.gov (United States)

Garcia-Burgos, Axel A.

2010-01-01

This document reviews the accomplishments of the author during an internship. During this internship, the author was assigned to the End User Services Office, which coordinates and oversees a wide selection of information technologies that enhance the productivity of the workforce at NASA Kennedy Space Center. During the internship the author performed an assessment of the work of the Outsourcing Desktop Initiative for NASA (ODIN) contract.

Ultrastructural and histopathologic findings after pars plana vitrectomy with a new hypersonic vitrector system. Qualitative preliminary assessment.

Directory of Open Access Journals (Sweden)

Salvador Pastor-Idoate

Full Text Available Preliminary assessment of a new prototype ultrasound-based hypersonic vitrector (HV by qualitatively examining the histopathological changes in the retina and vitreous body after pars plana vitrectomy (PPV and its ability to fragment vitreous collagen.Fourteen porcine cadaveric eyes, 20 eyes in live swine and six human cadaveric eyes underwent PPV using the HV or a pneumatic guillotine vitrector (GV. An additional 4 porcine crystalline lenses were touched with either the HV or GV for 1 minute. Following PPV, human vitreous was removed and processed for electron microscopy (EM. Eyes and lenses were fixed and sectioned for light microscopy (LM.There were no macroscopic retinal or optic nerve defects associated with either HV or GV PPVs. Cadaveric retinal specimens showed separation of the inner limiting membrane (ILM and vacuolization and fragmentation at the nerve fiber layer (NFL and the ganglion cell layer (GCL. ILM fragmentation and separation were found after PPV in live swine with both vitrectors. Small disruptions of the posterior capsule or structural lens defects were found after HV touch. The EM analysis revealed more fragmentation of human vitreous collagen fibrils after HV compared to GV PPV.LM and EM analysis of retina, vitreous, and crystalline lens after PPV showed similar morphological changes using the HV or the GV. Vitreous fragmentation appeared more effective with the HV. Overall this study suggests that the HV may be a promising new technology. More work is needed to quantitatively assess its safety and efficacy.

Preliminary post-closure safety assessment of repository concepts for low level radioactive waste at the Bruce Site, Ontario

International Nuclear Information System (INIS)

Little, R.H.; Penfold, J.S.S.; Egan, M.J.; Leung, H.

2005-01-01

The preliminary post-closure safety assessment of permanent repository concepts for low-level radioactive waste (LLW) at the Ontario Power Generation (OPG) Bruce Site is described. The study considered the disposal of both short and long-lived LLW. Four geotechnically feasible repository concepts were considered (two near-surface and two deep repositories). An approach consistent with best international practice was used to provide a reasoned and comprehensive analysis of post-closure impacts of the repository concepts. The results demonstrated that the deep repository concepts in shale and in limestone, and the surface repository concept on sand should meet radiological protection criteria. For the surface repository concept on glacial till, it appears that increased engineering such as grouting of waste and voids should be considered to meet the relevant dose constraint. Should the project to develop a permanent repository for LLW proceed, it is expected that this preliminary safety assessment would need to be updated to take account of future site-specific investigations and design updates. (author)

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992

International Nuclear Information System (INIS)

1992-12-01

Before disposing of transuranic radioactive waste in the Waste Isolation Pilot Plant (WIPP), the United States Department of Energy (DOE) must evaluate compliance with applicable long-term regulations of the United States Environmental Protection Agency (EPA). Sandia National Laboratories is conducting iterative performance assessments (PAs) of the WIPP for the DOE to provide interim guidance while preparing for a final compliance evaluation. This volume, Volume 2, contains the technical basis for the 1992 PA. Specifically, it describes the conceptual basis for consequence modeling and the PA methodology, including the selection of scenarios for analysis, the determination of scenario probabilities, and the estimation of scenario consequences using a Monte Carlo technique and a linked system of computational models. Additional information about the 1992 PA is provided in other volumes. Volume I contains an overview of WIPP PA and results of a preliminary comparison with the long-term requirements of the EPA's Environmental Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). Volume 3 contains the reference data base and values for input parameters used in consequence and probability modeling. Volume 4 contains uncertainty and sensitivity analyses related to the preliminary comparison with 40 CFR 191B. Volume 5 contains uncertainty and sensitivity analyses of gas and brine migration for undisturbed performance. Finally, guidance derived from the entire 1992 PA is presented in Volume 6

System of tactical assessment in Soccer (FUT-SAT: Development and preliminary validation

Directory of Open Access Journals (Sweden)

I.T. Costa

2011-01-01

Full Text Available The purpose of this paper was to report the development and preliminary validation of tactical assessment system in Soccer and highlight its advantages. The validation process followed five perspectives of the concept of validity that consider the value of heuristic methods and the importance of the description of behavior performed in playing situations. Thus, the process of validation was focused on four points: i acceptability and reasonableness of the test perceived by players; ii analysis of content of assessment tool through a panel of experts; iii potential of the assessment tool to discriminate the quality of the performance of players; iv observation reliability. The results displayed values higher than 0.63 for correlation between the evaluations of coaches and the system. It shows the potential of this system to distinguish the performances of players based on the evaluations of coaches. The players who performed the field test agreed with its physical demands and spatial and normative configurations. All experts endorsed the categories and variables of this system. The reliabilities showed values higher than 0.79 for intra and inter-observers. Therefore, it is possible to conclude that the system is valid and reliable for the assessment of the tactical behavior of soccer players.

Technology transfer and development: a preliminary look at Chinese technology in Guyana

Energy Technology Data Exchange (ETDEWEB)

Long, F

1982-05-01

Technology is regarded as a vital ingredient for development. Since developing countries can hardly fill their technological requirements indigenously, such countries tend to acquire the bulk of technology applied to their production systems from abroad. However, the transfer of technology tends to be associated with a series of problems: foreign exchange, inappropriateness, the generation of limited inter-sectorial linkages, limited use of raw materials, and other inputs associated with technology dependency. The study points to the fact that technology transfer need not necessarily be associated with the disadvantages identified in the literature. The study which essentially looks at the use of Chinese technology in clay-brick manufacturing in Guyana, shows that the country was able to reap several development benefits from the technology-transfer arrangement. At the same time, certain problems arising from the technology-transfer package such as the transfer of critical skills in key areas of production, and maintenance and servicing, are discussed. But these, the author argues, are not a function of restrictive conditions found in technology-transfer clauses, but rather of improper technology-transfer management. 2 tables.

Risk-based systems analysis for emerging technologies: Applications of a technology risk assessment model to public decision making

International Nuclear Information System (INIS)

Quadrel, M.J.; Fowler, K.M.; Cameron, R.; Treat, R.J.; McCormack, W.D.; Cruse, J.

1995-01-01

The risk-based systems analysis model was designed to establish funding priorities among competing technologies for tank waste remediation. The model addresses a gap in the Department of Energy's (DOE's) ''toolkit'' for establishing funding priorities among emerging technologies by providing disciplined risk and cost assessments of candidate technologies within the context of a complete remediation system. The model is comprised of a risk and cost assessment and a decision interface. The former assesses the potential reductions in risk and cost offered by new technology relative to the baseline risk and cost of an entire system. The latter places this critical information in context of other values articulated by decision makers and stakeholders in the DOE system. The risk assessment portion of the model is demonstrated for two candidate technologies for tank waste retrieval (arm-based mechanical retrieval -- the ''long reach arm'') and subsurface barriers (close-coupled chemical barriers). Relative changes from the base case in cost and risk are presented for these two technologies to illustrate how the model works. The model and associated software build on previous work performed for DOE's Office of Technology Development and the former Underground Storage Tank Integrated Demonstration, and complement a decision making tool presented at Waste Management 1994 for integrating technical judgements and non-technical (stakeholder) values when making technology funding decisions

Life cycle assessment of advanced waste water treatment

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Hansen, Peter Augusto

The EU FP6 NEPTUNE project is related to the EU Water Framework Directive and the main goal is to develop new and optimize existing waste water treatment technologies (WWTT) and sludge handling methods for municipal waste water. Besides nutrients, a special focus area is micropollutants (e....... In total more that 20 different waste water and sludge treatment technologies are to be assessed. This paper will present the preliminary LCA results from running the induced versus avoided impact approach (mainly based on existing LCIA methodology) on one of the advanced treatment technologies, i...

Preliminary Assessment of Potential Avian Interactions at Four Proposed Wind Energy Facilities on Vandenberg Air Force Base, California

Energy Technology Data Exchange (ETDEWEB)

2004-08-01

The United States Air Force (USAF) is investigating whether to install wind turbines to provide a supplemental source of electricity at Vandenberg Air Force Base (VAFB) near Lompoc, California. As part of that investigation, VAFB sought assistance from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) to provide a preliminary characterization of the potential risk to wildlife resources (mainly birds and bats) from wind turbine installations. With wind power development expanding throughout North America and Europe, concerns have surfaced over the number of bird fatalities associated with wind turbines. Guidelines developed for the wind industry by the National Wind Coordinating Committee (NWCC) recommend assessing potential impacts to birds, bats, and other potentially sensitive resources before construction. The primary purpose of an assessment is to identify potential conflicts with sensitive resources, to assist developers with identifying their permitting needs, and to develop strategies to avoid impacts or to mitigate their effects. This report provides a preliminary (Phase I) biological assessment of potential impacts to birds and bats that might result from construction and operation of the proposed wind energy facilities on VAFB.

The NICE ADHD health technology assessment: A review and critique

Directory of Open Access Journals (Sweden)

Schlander Michael

2008-01-01

Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

Hydrothermal Liquefaction Treatment Preliminary Hazard Analysis Report

Energy Technology Data Exchange (ETDEWEB)

Lowry, Peter P.; Wagner, Katie A.

2015-08-31

A preliminary hazard assessment was completed during February 2015 to evaluate the conceptual design of the modular hydrothermal liquefaction treatment system. The hazard assessment was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. This analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public.

Technology assessment of wind energy conversion systems

Energy Technology Data Exchange (ETDEWEB)

Meier, B. W.; Merson, T. J.

1980-09-01

Environmental data for wind energy conversion systems (WECSs) have been generated in support of the Technology Assessment of Solar Energy (TASE) program. Two candidates have been chosen to characterize the WECS that might be deployed if this technology makes a significant contribution to the national energy requirements. One WECS is a large machine of 1.5-MW-rated capacity that can be used by utilities. The other WECS is a small machine that is characteristic of units that might be used to meet residential or small business energy requirements. Energy storage systems are discussed for each machine to address the intermittent nature of wind power. Many types of WECSs are being studied and a brief review of the technology is included to give background for choosing horizontal axis designs for this study. Cost estimates have been made for both large and small systems as required for input to the Strategic Environmental Assessment Simulation (SEAS) computer program. Material requirements, based on current generation WECSs, are discussed and a general discussion of environmental impacts associated with WECS deployment is presented.

Preliminary report of the Hepatic Encephalopathy Assessment Driving Simulator (HEADS) score.

Science.gov (United States)

Baskin-Bey, Edwina S; Stewart, Charmaine A; Mitchell, Mary M; Bida, John P; Rosenthal, Theodore J; Nyberg, Scott L

2008-01-01

Audiovisual simulations of real-life driving (ie, driving simulators) have been used to assess neurologic dysfunction in a variety of medical applications. However, the use of simulated driving to assess neurologic impairment in the setting of liver disease (ie, hepatic encephalopathy) is limited. The aim of this analysis was to develop a scoring system based on simulated driving performance to assess mild cognitive impairment in cirrhotic patients with hepatic encephalopathy. This preliminary analysis was conducted as part of the Hepatic Encephalopathy Assessment Driving Simulator (HEADS) pilot study. Cirrhotic volunteers initially underwent a battery of neuropsychological tests to identify those cirrhotic patients with mild cognitive impairment. Performance during an audiovisually simulated course of on-road driving was then compared between mildly impaired cirrhotic patients and healthy volunteers. A scoring system was developed to quantify the likelihood of cognitive impairment on the basis of data from the simulated on-road driving. Mildly impaired cirrhotic patients performed below the level of healthy volunteers on the driving simulator. Univariate logistic regression and correlation models indicated that several driving simulator variables were significant predictors of cognitive impairment. Five variables (run time, total map performance, number of collisions, visual divided attention response, and average lane position) were incorporated into a quantitative model, the HEADS scoring system. The HEADS score (0-9 points) showed a strong correlation with cognitive impairment as measured by area under the receiver-operator curve (.89). The HEADS system appears to be a promising new tool for the assessment of mild hepatic encephalopathy.

Unmanned Ground Vehicle Tactical Behaviors Technology Assessment

National Research Council Canada - National Science Library

Childers, Marshal A; Bodt, Barry A; Hill, Susan G; Camden, Richard; Dean, Robert M; Dodson, William F; Sutton, Lyle G; Sapronov, Leonid

2009-01-01

During 4-14 February 2008, the U.S. Army Research Laboratory and General Dynamics Robotic Systems conducted an unmanned systems tactical behaviors technology assessment at three training areas of Ft. Indiantown Gap, PA...

Incorporating the Technology Roadmap Uncertainties into the Project Risk Assessment

International Nuclear Information System (INIS)

Bonnema, B.E.

2002-01-01

This paper describes two methods, Technology Roadmapping and Project Risk Assessment, which were used to identify and manage the technical risks relating to the treatment of sodium bearing waste at the Idaho National Engineering and Environmental Laboratory. The waste treatment technology under consideration was Direct Vitrification. The primary objective of the Technology Roadmap is to identify technical data uncertainties for the technologies involved and to prioritize the testing or development studies to fill the data gaps. Similarly, project management's objective for a multi-million dollar construction project includes managing all the key risks in accordance to DOE O 413.3 - ''Program and Project Management for the Acquisition of Capital Assets.'' In the early stages, the Project Risk Assessment is based upon a qualitative analysis for each risk's probability and consequence. In order to clearly prioritize the work to resolve the technical issues identified in the Technology Roadmap, the issues must be cross- referenced to the project's Risk Assessment. This will enable the project to get the best value for the cost to mitigate the risks

Carbon Capture: A Technology Assessment

Science.gov (United States)

2013-10-21

whereas laboratory-scale experiments typically seek to validate or obtain data for specific components of a system. Laboratory- and bench-scale processes...Plant,” Energy, vol. 35 (2010), pp. 841-850. E. Favre, R. Bounaceur, and D. Roizard, “ Biogas , Membranes and Carbon Dioxide Capture,” Journal of...pp. 1-49. 64 Favre, “ Biogas , Membranes.” Carbon Capture: A Technology Assessment Congressional Research Service 42 materials have pore sizes

Waste to biodiesel: A preliminary assessment for Saudi Arabia.

Science.gov (United States)

Rehan, M; Gardy, J; Demirbas, A; Rashid, U; Budzianowski, W M; Pant, Deepak; Nizami, A S

2018-02-01

This study presents a preliminary assessment of biodiesel production from waste sources available in the Kingdom of Saudi Arabia (KSA) for energy generation and solution for waste disposal issues. A case study was developed under three different scenarios: (S1) KSA population only in 2017, (S2) KSA population and pilgrims in 2017, and (S3) KSA population and pilgrims by 2030 using the fat fraction of the municipal solid waste. It was estimated that S1, S2, and S3 scenarios could produce around 1.08, 1.10 and 1.41 million tons of biodiesel with the energy potential of 43423, 43949 and 56493 TJ respectively. Furthermore, annual savings of US $55.89, 56.56 and 72.71 million can be generated from landfill diversion of food waste and added to the country's economy. However, there are challenges in commercialization of waste to biodiesel facilities in KSA, including waste collection and separation, impurities, reactor design and biodiesel quality. Copyright © 2017 Elsevier Ltd. All rights reserved.

Distribution and preliminary exposure assessment of bisphenol AF (BPAF) in various environmental matrices around a manufacturing plant in China.

Science.gov (United States)

Song, Shanjun; Ruan, Ting; Wang, Thanh; Liu, Runzeng; Jiang, Guibin

2012-12-18

Increasing attention has been paid to bisphenol A and bisphenol (BP) analogues due to high production volumes, wide usage and potential adverse effects. Bisphenol AF (BPAF) is considered a new bisphenol analogue which is used as raw material in plastic industry, but little is known about its occurrence in the environment and the potential associated risk. In this work, BPAF levels and environmental distribution were reported in samples collected around a manufacturing plant and a preliminary exposure risk assessment to local residents was conducted. BPAF was detected in most of the samples, with levels in river ranging between environment and organic carbon was the domain factor during the process. The preliminary BPAF exposure assessment based on the CSOIL model suggested that children could have higher intake of BPAF than adults through inhalation of soils, dermal exposure by soils contact and bathing with well water.

Strategic Planning Tools for Large-Scale Technology-Based Assessments

Science.gov (United States)

Koomen, Marten; Zoanetti, Nathan

2018-01-01

Education systems are increasingly being called upon to implement new technology-based assessment systems that generate efficiencies, better meet changing stakeholder expectations, or fulfil new assessment purposes. These assessment systems require coordinated organisational effort to implement and can be expensive in time, skill and other…

Multi-Criteria Sustainability Assessment of Urban Sludge Treatment Technologies

DEFF Research Database (Denmark)

An, Da; Xi, Beidou; Ren, Jingzheng

2017-01-01

to determine the weights of the criteria for sustainability assessment, and extension theory was used to prioritize the alternative technologies for the treatment of urban sewage sludge and grade their sustainability performances. An illustrative case including three technologies (compositing, incineration...

Review of early assessment models of innovative medical technologies

DEFF Research Database (Denmark)

Fasterholdt, Iben; Krahn, Murray D; Kidholm, Kristian

2017-01-01

INTRODUCTION: Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models...

[Assessment of an educational technology in the string literature about breastfeeding].

Science.gov (United States)

de Oliveira, Paula Marciana Pinheiro; Pagliuca, Lorita Marlena Freitag

2013-02-01

The goal of this study was to assess educational technology in the string literature about breastfeeding. The study was conducted between March and September 2009 by breastfeeding experts and experts on string literature. A psychometric model was adopted as the theoretical-methodological framework. For data collection, an instrument was used to assess the content about breastfeeding and the string literature rules. The analysis was based on comparisons of the notes and critical reflections of experts. Ethical guidelines were followed during the study. After the assessments, the educational technology was adjusted until all of the experts agreed. The assessment of educational technology can reduce obstacles to information dissemination and can lead to improvements in quality of life.

Social and ethical analysis in health technology assessment.

Science.gov (United States)

Tantivess, Sripen

2014-05-01

This paper presents a review of the domestic and international literature on the assessment of the social and ethical implications of health technologies. It gives an overview of the key concepts, principles, and approaches that should be taken into account when conducting a social and ethical analysis within health technology assessment (HTA). Although there is growing consensus among healthcare experts that the social and ethical ramifications of a given technology should be examined before its adoption, the demand for this kind of analysis among policy-makers around the world, including in Thailand, has so far been lacking. Currently decision-makers mainly base technology adoption decisions using evidence on clinical effectiveness, value for money, and budget impact, while social and ethical aspects have been neglected. Despite the recognized importance of considering equity, justice, and social issues when making decisions regarding health resource allocation, the absence of internationally-accepted principles and methodologies, among other factors, hinders research in these areas. Given that developing internationally agreed standards takes time, it has been recommended that priority be given to defining processes that are justifiable, transparent, and contestable. A discussion of the current situation in Thailand concerning social and ethical analysis of health technologies is also presented.

Suitability assessment of building energy saving technologies for office buildings in cold areas of China based on an assessment framework

International Nuclear Information System (INIS)

Geng, Geng; Wang, Zhaoxia; Zhao, Jing; Zhu, Neng

2015-01-01

Highlights: • An assessment method considering economy, environment and technology is proposed. • Office buildings are classified into 3 types and weights are calculated respectively. • BESTs were summed up as 3 suitability levels. • Recommendations are proposed for adopting in design stage. - Abstract: Blind application and extensive copy of building energy saving technologies have been found very common through investigation in China. Emphases should be put on the suitability assessment when selecting and optimizing building energy saving technologies. This paper created an assessment method, namely an assessment framework to assess the suitability level of building energy saving technologies from a holistic point of view. Fuzzy analytic hierarchy process was adopted. 3 factors and 8 sub-factors were included in the framework. The office buildings were classified into 3 types to calculate weights of factors and sub-factors. The assessment framework was established for each type of office buildings. 20 energy saving technologies from surveyed cases was selected as case study. Ranks of suitability level of the assessment objects were obtained for each type of office buildings. The assessment results could be referred when selecting building energy saving technologies in the design stage

Preliminary Assessment of a Compliant Gait Exoskeleton.

Science.gov (United States)

Cestari, Manuel; Sanz-Merodio, Daniel; Garcia, Elena

2017-06-01

Current commercial wearable gait exoskeletons contain joints with stiff actuators that cannot adapt to unpredictable environments. These actuators consume a significant amount of energy, and their stiffness may not be appropriate for safe human-machine interactions. Adjustable compliant actuators are being designed and implemented because of their ability to minimize large forces due to shocks, to safely interact with the user, and to store and release energy in passive elastic elements. Introduction of such compliant actuation in gait exoskeletons, however, has been limited by the larger power-to-weight and volume ratio requirement. This article presents a preliminary assessment of the first compliant exoskeleton for children. Compliant actuation systems developed by our research group were integrated into the ATLAS exoskeleton prototype. The resulting device is a compliant exoskeleton, the ATLAS-C prototype. The exoskeleton is coupled with a special standing frame to provide balance while allowing a semi-natural gait. Experiments show that when comparing the behavior of the joints under different stiffness conditions, the inherent compliance of the implemented actuators showed natural adaptability during the gait cycle and in regions of shock absorption. Torque tracking of the joint is achieved, identifying the areas of loading response. The implementation of a state machine in the control of knee motion allowed reutilization of the stored energy during deflection at the end of the support phase to partially propel the leg and achieve a more natural and free swing.

Preliminary Guideline for the High Temperature Structure Integrity Assessment Procedure Part II. High Temperature Structural Integrity Assessment

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Han; Kim, J. B.; Lee, H. Y.; Park, C. G.; Joo, Y. S.; Koo, G. H.; Kim, S. H

2007-02-15

A high temperature structural integrity assessment belongs to the Part II of a whole preliminary guideline for the high temperature structure. The main contents of this guideline are the evaluation procedures of the creep-fatigue crack initiation and growth in high temperature condition, the high temperature LBB evaluation procedure, and the inelastic evaluations of the welded joints in SFR structures. The methodologies for the proper inelastic analysis of an SFR structures in high temperatures are explained and the guidelines of inelastic analysis options using ANSYS and ABAQUS are suggested. In addition, user guidelines for the developed NONSTA code are included. This guidelines need to be continuously revised to improve the applicability to the design and analysis of the SFR structures.

Scenario drafting to anticipate future developments in technology assessment

NARCIS (Netherlands)

Retel, Valesca; Retel, V.P.; Joore, M.A.; Rutgers, E.J.; van Harten, Willem H.

2012-01-01

Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and

Patient-centered technological assessment and monitoring of depression for low-income patients.

Science.gov (United States)

Wu, Shinyi; Vidyanti, Irene; Liu, Pai; Hawkins, Caitlin; Ramirez, Magaly; Guterman, Jeffrey; Gross-Schulman, Sandra; Sklaroff, Laura Myerchin; Ell, Kathleen

2014-01-01

Depression is a significant challenge for ambulatory care because it worsens health status and outcomes, increases health care utilizations and costs, and elevates suicide risk. An automatic telephonic assessment (ATA) system that links with tasks and alerts to providers may improve quality of depression care and increase provider productivity. We used ATA system in a trial to assess and monitor depressive symptoms of 444 safety-net primary care patients with diabetes. We assessed system properties, evaluated preliminary clinical outcomes, and estimated cost savings. The ATA system is feasible, reliable, valid, safe, and likely cost-effective for depression screening and monitoring for low-income primary care population.

Health technology assessment in Australia: The role of AHTAC

International Nuclear Information System (INIS)

Kearney, B.; Willis, E.

1997-01-01

This paper outlines and discusses the field of medical technology assessment and the role of the Australian Health Technology Advisory Committee (AHTAC) in that process. Developments in medical technologies have altered the way in which health care is practised and delivered. As part of its work program, AHTAC has re-evaluating some existing medical technologies to assess how and under what circumstances new developments can contribute to the alleviation of the illness and suffering of the patients. Three case studies are described. These are: magnetic resonance imaging, diagnostic ultrasound and beam and isotope radiotherapy. It is stressed that the policy task is a complex one attempting to balance the need for cost containment whilst at the same time ensuring that the processes of innovation into Australia and diffusion occur in a manner which maximizes the benefit and minimizes any harm to the Australian community

Assessing the Penetrating Abilities of Experimental Preparation with Dental Infiltrant Features Using Optical Microscope: Preliminary Study.

Science.gov (United States)

Skucha-Nowak, Małgorzata; Machorowska-Pieniążek, Agnieszka; Tanasiewicz, Marta

2016-01-01

The aim of the infiltration technique is to penetrate demineralized enamel with a low viscosity resin. Icon® (DMG) is the first ever and so far the only dental infiltrant. Bacteriostaticity is one of the properties that should be inherent in dental infiltrants, but Icon lacks this feature. The aim of the preliminary study was to properly choose a dye which would allow us to assess the penetrating abilities of our own, experimental preparation with features of a dental infiltrant with bacteriostatic properties and to compare using an optical microscope the depth of infiltration of the designed experimental preparation with the infiltrant available on the market. The preparation is supposed to infiltrate decalcified human enamel and be assessed with an optical microscope. Eosin, neutral fuchsine and methylene blue were added to experimental preparation with dental infiltrant features and to Icon® (DMG) in order to assess the depth of penetration of the experimental solution into the decalcified layers of enamel. The experimental solution mixes well with eosin, neutral fuchsine, and methylene blue. During the preliminary study, the authors concluded that the experimental solution mixes well with methylene blue, neutral fuchsine, and eosin. An addition of eosin to a preparation which infiltrates inner, demineralized enamel layers, facilitates the assessment of such a preparation with an optical microscope. A designed experimental solution with the main ingredients, i.e., 2-hydroxyethyl methacrylate (HEMA) and tetraethylene glycol dimethacrylate (TEGDMA) with a ratio of 75% to 25% penetrates the demineralized (decalcified) inner parts of the enamel and polymerizes when exposed to light. In order to assess the infiltration of the experimental solution into the demineralized enamel layers, it is required to improve the measurement techniques that utilize optical microscopy.

Decision Gate Process for Assessment of a Technology Development Portfolio

Science.gov (United States)

Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

Preliminary Assessment of Heavy-Water Thorium Reactors in the Brazilian Nuclear Programme

Energy Technology Data Exchange (ETDEWEB)

Salvo Brito, S. de; Lepecki, W. P.S. [Instituto de Pesquisas Radioativas, Belo Horizonte (Brazil)

1968-04-15

Since December 1965, the Instituto de Pesquisas Radioativas has been studying for the Brazilian Nuclear Energy Commission the feasibility of a thorium reactor programme in Brazil; since June 1966, the programme has been developed in close co-operation with the French Atomic Energy Commission. A reference conceptual design of a heavy-water-cooled and -moderated thorium converter reactor has been developed. The main features of that concept are the use of a prestressed-concrete pressure vessel, integrated arrangement of the primary circuit and the possibility of on-load fuel management. Economic competitiveness could be the result of high compactness, low capital costs and low fuel consumption. The technology involved is not very sophisticated; intensive engineering development work must be done in areas like fuel charge machine, concrete vessel insulation, and proper design of heat exchangers, but it is the feeling of the Group that these problems could be solved without seriously compromising the economic feasibility of the concept. Preliminary studies were made on the alternative use of enriched uranium or plutonium as a feed for the programme; in the latter case, plutonium could be produced in natural uranium reactors of the same type. The general conditions favouring each of these approaches to the thorium cycle have been determined, in particular those related to the costs of the fissile materials in the world market and to the country's policy related to nuclear fuel imports. The results of the preliminary studies are very encouraging and could justify the beginning of a research and development programme leading to the construction of a prototype in the 1970's. (author)

Technology needs assessment (TNA) resource document for South Africa

CSIR Research Space (South Africa)

Taviv, R

2007-08-01

Full Text Available TNA(Technology needs assessment) is a requirement of Article 4.5 of the UNFCCC ‘Technology Transfer’ is a broad set of processes covering the flows of know-how, experience and equipment for mitigating or adapting to climate change amongst different...

Tiger Team Assessment, Energy Technology Engineering Center

International Nuclear Information System (INIS)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies

Tiger Team Assessment, Energy Technology Engineering Center

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

Technology enhanced peer learning and peer assessment

DEFF Research Database (Denmark)

Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

2016-01-01

This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems and Fr...... be a huge benefit from developing learning design patterns that facilitate informal peer learning and reinforce knowledge sharing practices.......This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...

A preliminary economic feasibility assessment of nuclear desalination in Madura Island

International Nuclear Information System (INIS)

Kim, S.-H.; Hwang, Y.-D.; Konishi, T.; Hudi Hastowo

2005-01-01

A joint study between KAERI and BATAN, which is entitled 'A preliminary economic feasibility assessment of nuclear desalination in Madura Island', is being conducted under the framework of the Interregional Technical Cooperation Project of IAEA, signed on Oct. 10, 2001 at IAEA. The duration of the project is January 2002 to December 2004. An economic feasibility of nuclear desalination using system-integrated modular advanced reactor (SMART), which will provide Madura Island with electricity and potable water and also support industrialisation and tourism, will be assessed during the project. The scope of this joint study includes the analyses for the short- and long-term energy and water demand as well as the supply plan for Madura Island, evaluation of the site characteristics, environmental impacts and health aspects, technical and economic evaluation of SMART and its desalination system, including the feasibility of its being identified on the Madura Island. KAERI and BATAN are cooperating in conducting a joint study, and IAEA provides technical support and a review of the study products. This paper presents the interim results of the joint study by focussing on the technical and economic aspects of nuclear desalination using SMART in Madura Island. (author)

Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

Science.gov (United States)

Agnew, Donald L.; Jones, Peter A.

1989-01-01

A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

Technologies for Interactive Learning and Assessment Content Development

Science.gov (United States)

Gusev, Marjan; Ristov, Sasko; Armenski, Goce

2016-01-01

Recent technology trends evolved the student assessment from traditional ones ("pen-and-paper" and "face-to-face") to modern e-Assessment system. These modern approaches allow the teachers to conduct and evaluate an exam with huge number of students in a short period of time. Even more important, both the teacher and the…

Preliminary assessment report for Virginia Army National Guard Army Aviation Support Facility, Richmond International Airport, Installation 51230, Sandston, Virginia

International Nuclear Information System (INIS)

Dennis, C.B.

1993-09-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Virginia Army National Guard (VaARNG) property in Sandston, Virginia. The Army Aviation Support Facility (AASF) is contiguous with the Richmond International Airport. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The PA is designed to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. The AASF, originally constructed as an active Air Force interceptor base, provides maintenance support for VaARNG aircraft. Hazardous materials used and stored at the facility include JP-4 jet fuel, diesel fuel, gasoline, liquid propane gas, heating oil, and motor oil

Vocal Sight-Reading Assessment: Technological Advances, Student Perceptions, and Instructional Implications

Science.gov (United States)

Henry, Michele

2015-01-01

This study investigated choral singers' comfort level using computer technology for vocal sight-reading assessment. High school choral singers (N = 138) attending a summer music camp completed a computer-based sight-reading assessment and accompanying pre- and posttest surveys on their musical backgrounds and perceptions about technology. A large…

Development and Preliminary Application of Multi-channel Agricultural Science and Technology Consulting Service U Disk

Science.gov (United States)

Yu, W. S.; Luo, C. S.; Wei, Q. F.; Zheng, Y. M.; Cao, C. Z.

2017-12-01

To deal with the “last kilometer” problem during the agricultural science and technology information service, the USB flash disk “Zixuntong”, which integrated five major consulting channels, i.e., telephone consultation, mutual video, message consultation, online customer service and QQ group was developed on the bases of capital experts and date resources. Since the products have the computer and telephone USB interface and are combined with localized information resources, users can obtain useful information on any terminal without the restriction of network. Meanwhile, the cartoon appearance make it friendly and attractive to people. The USB flash disk was used to provide agricultural expert consulting services and obtained a good preliminary application achievement. Finally, we concluded the creative application of USB flash disk in agricultural consulting services and prospected the future development direction of agricultural mobile consultation.

An assessment of space reactor technology needs and recommendations for development

International Nuclear Information System (INIS)

Marshall, A.C.; Wiley, R.L.

1996-01-01

In order to provide a strategy for space reactor technology development, the Defense Nuclear Agency (DNA) has authorized a brief review of potential national needs that may be addressed by space reactor systems. A systematic approach was used to explore needs at several levels that are increasingly specific. sm-bullet Level 0 emdash General Trends and Issues sm-bullet Level 1 emdash Generic Space Capabilities to Address Trends sm-bullet Level 2 emdash Requirements to Support Capabilities sm-bullet Level 3 emdash System Types Capable of Meeting Requirements sm-bullet Level 4 emdash Generic Reactor System Types sm-bullet Level 5 emdash Specific Baseline Systems Using these findings, a strategy was developed to support important space reactor technologies within a limited budget. A preliminary evaluation identified key technical issues and provide a prioritized set of candidate research projects. The evaluation of issues and the recommended research projects are presented in a companion paper. copyright 1996 American Institute of Physics

Preliminary assessment report for Army Aviation Support Facility No. 3, Installation 13307, Hunter Army Airfield, Savannah, Georgia. Installation Restoration Program

Energy Technology Data Exchange (ETDEWEB)

Kolpa, R.; Smith, K.

1993-07-01

This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Georgia Army National Guard property located on Hunter Army Airfield (HAA) near Savannah, Georgia, known as Army Aviation Support Facility (AASF) No. 3. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, types and quantities of hazardous substances utilized, the nature and amounts of wastes generated or stored at the facility, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the AASF No. 3 property, requirements of the Department of Defense Installation Restoration Program (IRP). The scope of this assessment is limited to the facilities and past activities contained within the area now occupied by AASF No. 3. However, this assessment report is intended to be read in conjunction with a previous IRP assessment of HAA completed in 1992 (USATHAMA 1992) and to provide comprehensive information on AASF No. 3 for incorporation with information contained in that previous assessment for the entirety of HAA.

The role of surgeons in identifying emerging technologies for health technology assessment.

Science.gov (United States)

Stafinski, Tania; Topfer, Leigh-Ann; Zakariasen, Ken; Menon, Devidas

2010-04-01

Health technology assessment (HTA) is a tool intended to help policy-makers decide which technologies to fund. However, given the proliferation of new technologies, it is not possible to undertake an HTA of each one before it becomes funded. Consequently, "horizon-scanning" processes have been developed to identify emerging technologies that are likely to have a substantial impact on clinical practice. Although the importance of physicians in the adoption of new technologies is well recognized, their role in horizon scanning in Canada has been limited. The purpose of this project was to pilot an approach to engage physicians, specifically surgeons, in provincial horizon-scanning activities. We invited 18 surgeons from Alberta's 2 medical schools to a horizon-scanning workshop to solicit their views on emerging technologies expected to impact surgical practice within the next 5 years and/or the importance of different attributes or characteristics of new technologies. Surgeons, regardless of specialty, identified developments designed to enhance existing minimally invasive surgical techniques, such as endoscopic, robotic and image-guided surgery. Several nonsurgical areas, including molecular genetics and nano technology, were also identified. Of the 13 technology attributes discussed, safety or risk, effectiveness and feasibility were rated as most important. Lastly, participating surgeons expressed an interest in becoming further involved in local HTA initiatives. Surgeons, as adopters and users of health technologies, represent an important and accessible information source for identifying emerging technologies for HTA. A more formal, ongoing relationship between the government, HTA and surgeons may help to optimize the use of HTA resources.

Wearable technology for spine movement assessment: A systematic review

OpenAIRE

Papi, Enrica; Koh, Woon Senn; McGregor, Alison H.

2017-01-01

Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies t...

Assessment of Wearable Sensor Technologies for Biosurveillance

Science.gov (United States)

2014-11-01

include: textile-based wearable sensors, epidermal tattoos, DNA and protein sensors, forensic detection of explosives, remote environmental sensing...Assessment of Wearable Sensor Technologies for Biosurveillance P a g e 4 3 David L. Hirschberg, PhD Assistant Professor, Clinical Pathology

Technology enhanced peer learning and peer assessment

DEFF Research Database (Denmark)

Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

2016-01-01

This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...... and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also...

Techno-experiential design assessment and media experience database: A method for emerging technology assessment

OpenAIRE

Schick, Dan

2005-01-01

This thesis evaluates the Techno-Experiential Design Assessment (TEDA) for social research on new media and emerging technology. Dr. Roman Onufrijchuk developed TEDA to address the shortcomings of current methods designed for studying existing technologies. Drawing from the ideas of Canadian media theorist Marshall McLuhan, TEDA focuses on the environmental changes introduced by a new technology into a user's life. I describe the key components of the TEDA methodology and provide examples of ...

A preliminary assessment of the market coupling arrangement on the Kontek cable

International Nuclear Information System (INIS)

Kristiansen, Tarjei

2007-01-01

This paper presents a preliminary assessment of the market coupling arrangement on the Kontek (KT) cable between East Denmark and Germany and an assessment of the original auction mechanism. KT, the new spot price area, was introduced in Germany on October 5, 2005 to facilitate a market coupling arrangement on the KT cable between East Denmark and Germany. We would expect the KT price to correlate more with the European Energy Exchange (EEX) price because arbitrage normally levelizes the price. However, spot prices in late 2005 were both high and volatile because congestion management practices in Sweden transferred internal bottlenecks to the cable between Sweden and East Denmark. Since spot prices were equal in East Denmark and the KT area for a substantial time, it implies that some hours had no congestion on the KT cable. Market players valued the previous monthly auctions for transmission capacity more than the daily auctions. Compared to the daily auctions, market players received smaller payoffs on average for the market coupling arrangement, and the smallest payoffs for the monthly auctions

The Development of Adolescent Online Reading Literacy Assessments

OpenAIRE

Kuei-Lin Chang

2013-01-01

By adopting the constructs of reading literacy and with the use of information and communication technology, the purpose of this study is to develop two adolescent online reading literacy assessments (ORLA) and examine the preliminary validity of ORLA. In addition, samples of online reading literacy performance are described. The design of ORLA is based on PISA electronic reading assessment framework and Leu et al. (2004)’s online reading comprehension definition. A total of 601 eighth grader...

Preliminary environmental assessment for the Satellite Power System (SPS). Revision 1. Volume 2. Detailed assessment

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The Department of Energy (DOE) is considering several options for generating electrical power to meet future energy needs. The satellite power system (SPS), one of these options, would collect solar energy through a system of satellites in space and transfer this energy to earth. A reference system has been described that would convert the energy to microwaves and transmit the microwave energy via directive antennas to large receiving/rectifying antennas (rectennas) located on the earth. At the rectennas, the microwave energy would be converted into electricity. The potential environmental impacts of constructing and operating the satellite power system are being assessed as a part of the Department of Energy's SPS Concept Development and Evaluation Program. This report is Revision I of the Preliminary Environmental Assessment for the Satellite Power System published in October 1978. It refines and extends the 1978 assessment and provides a basis for a 1980 revision that will guide and support DOE recommendations regarding future SPS development. This is Volume 2 of two volumes. It contains the technical detail suitable for peer review and integrates information appearing in documents referenced herein. The key environmental issues associated with the SPS concern human health and safety, ecosystems, climate, and electromagnetic systems interactions. In order to address these issues in an organized manner, five tasks are reported: (I) microwave-radiation health and ecological effects; (II) nonmicrowave health and ecological effectss; (III) atmospheric effects; (IV) effects on communication systems due to ionospheric disturbance; and (V) electromagnetic compatibility. (WHK)

Preliminary assessment of the dose to the interventional radiologist in fluoro-CT-guided procedures

International Nuclear Information System (INIS)

Pereira, M. F.; Alves, J. G.; Sarmento, S.; Santos, J. A. M.; Sousa, M. J.; Gouvea, M.; Oliveira, A. D.; Cardoso, J. V.; Santos, L. M.

2011-01-01

A preliminary assessment of the occupational dose to the intervention radiologist received in fluoroscopy computerised tomography (CT) used to guide the collection of lung and bone biopsies is presented. The main aim of this work was to evaluate the capability of the reading system as well as of the available whole-body (WB) and extremity dosemeters used in routine monthly monitoring periods to measure per procedure dose values. The intervention radiologist was allocated 10 WB detectors (LiF: Mg, Ti, TLD-100) placed at chest and abdomen levels above and below the lead apron, and at both right and left arms, knees and feet. A special glove was developed with casings for the insertion of 11 extremity detectors (LiF:Mg, Cu, P, TLD-100H) for the identification of the most highly exposed fingers. The H p (10) dose values received above the lead apron (ranged 0.20-0.02 mSv) depend mainly on the duration of the examination and on the placement of physician relative to the beam, while values below the apron are relatively low. The left arm seems to receive a higher dose value. H p (0.07) values to the hand (ranged 36.30-0.06 mSv) show that the index, middle and ring fingers are the most highly exposed. In this study, the wrist dose was negligible compared with the finger dose. These results are preliminary and further studies are needed to better characterise the dose assessment in CT fluoroscopy. (authors)

Technological pedagogical content knowledge of prospective mathematics teachers regarding evaluation and assessment

Directory of Open Access Journals (Sweden)

Ercan Atasoy

2016-04-01

Full Text Available The ‘technology integrated assessment process’ is an innovative method to capture and determine students’ understanding of mathematics. This assessment process is claimed to provide a singular dynamism for teaching and learning activities and it is also claimed to be of the most important elements of instruction in the educational system. In this sense, this study aims to investigate technological pedagogical content knowledge (TPACK of prospective mathematics teachers regarding the ‘evaluation’ and ‘assessment’ process. To achieve this aim, the method of qualitative research was conducted with 20 teachers. Video records and lesson plans were collected and a Mathematics Teacher TPACK Development Model was utilized to reveal themes and key features of the data. The findings revealed that, although the majority of teachers stated that they would like to use technology-integrated tools in the assessment and evaluation processes, they strongly preferred to use traditional assessment and evaluation techniques, such as pen and paper activities, multiple-choice questions in virtual environments, etc. Hence, the evidence suggests that teachers would be unable to use appropriately the technological assessment process in order to reveal students’ understanding of mathematics. As seen from the teachers’ lectures, they perceived that technology would be suitable for evaluation and assessment but in a limited way.

Sustainability assessment of renewable power and heat generation technologies

International Nuclear Information System (INIS)

Dombi, Mihály; Kuti, István; Balogh, Péter

2014-01-01

Rationalisation of consumption, more efficient energy usage and a new energy structure are needed to be achieved in order to shift the structure of energy system towards sustainability. The required energy system is among others characterised by intensive utilisation of renewable energy sources (RES). RES technologies have their own advantages and disadvantages. Nevertheless, for the strategic planning there is a great demand for the comparison of RES technologies. Furthermore, there are additional functions of RES utilisation expected beyond climate change mitigation, e.g. increment of employment, economic growth and rural development. The aim of the study was to reveal the most beneficial RES technologies with special respect to sustainability. Ten technologies of power generation and seven technologies of heat supply were examined in a multi-criteria sustainability assessment frame of seven attributes which were evaluated based on a choice experiment (CE) survey. According to experts the most important characteristics of RES utilisation technologies are land demand and social impacts i.e. increase in employment and local income generation. Concentrated solar power (CSP), hydropower and geothermal power plants are favourable technologies for power generation, while geothermal district heating, pellet-based non-grid heating and solar thermal heating can offer significant advantages in case of heat supply. - highlights: • We used choice experiment to estimate the weights of criteria for the sustainability assessment of RES technologies. • The most important attributes of RES technologies according to experts are land demand and social impacts. • Concentrated solar power (CSP), hydropower and geothermal power plants are advantageous technologies for power generation. • Geothermal district heating, pellet-based non-grid heating and solar thermal heating are favourable in case of heat supply

Making Use of the New Student Assessment Standards To Enhance Technological Literacy.

Science.gov (United States)

Russell, Jill

2003-01-01

Describes the student assessment standards outlined in "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards," a companion to the "Standards for Technological Literacy." Discusses how the standards apply to everyday teaching practices. (JOW)

Process for Selecting System Level Assessments for Human System Technologies

Science.gov (United States)

Watts, James; Park, John

2006-01-01

The integration of many life support systems necessary to construct a stable habitat is difficult. The correct identification of the appropriate technologies and corresponding interfaces is an exhaustive process. Once technologies are selected secondary issues such as mechanical and electrical interfaces must be addressed. The required analytical and testing work must be approached in a piecewise fashion to achieve timely results. A repeatable process has been developed to identify and prioritize system level assessments and testing needs. This Assessment Selection Process has been defined to assess cross cutting integration issues on topics at the system or component levels. Assessments are used to identify risks, encourage future actions to mitigate risks, or spur further studies.

Assessment of impacts from different waste treatment and waste disposal technologies: Regional Management Plan

International Nuclear Information System (INIS)

Robertson, B.C.; Sutherland, A.A.

1986-01-01

This report presents assessments of treatment and disposal technologies that appear to be appropriate for use in regional facilities in the Midwest Compact Region. The treatment technologies assessed: compaction with a supercompactor; incineration; and incineration followed by solidfication of the incinerator ash. The disposal technologies assessed are: shallow land burial, considered a baseline for comparison of other technologies; below-ground vaults; abov-groudn vaults; the earth mounded concrete bunker, a technology developed in France; improved shallow land burial, essentially deeper burial; modular concrete canister disposal; mined cavities (both new and existing); and unlined augered holes; and lined augered holes. The teatment technologies are assessed primarily in terms of the their impact on the waste management system, and generally not comparatively. The dispoal technologies are assessed relative to the present standard practice shallow land burial; shallow land burial was slected as a frame of reference because it has an experience base spanning several decades, not because of any preferential characteristics. 20 refs., 5 tabs

ASSESSING INDIVIDUAL PERFORMANCE ON INFORMATION TECHNOLOGY ADOPTION: A NEW MODEL

OpenAIRE

Diah Hari Suryaningrum

2012-01-01

This paper aims to propose a new model in assessing individual performance on information technology adoption. The new model to assess individual performance was derived from two different theories: decomposed theory of planned behavior and task-technology fit theory. Although many researchers have tried to expand these theories, some of their efforts might lack of theoretical assumptions. To overcome this problem and enhance the coherence of the integration, I used a theory from social scien...

What Do They Understand? Using Technology to Facilitate Formative Assessment

Science.gov (United States)

Mitten, Carolyn; Jacobbe, Tim; Jacobbe, Elizabeth

2017-01-01

Formative assessment is so important to inform teachers' planning. A discussion of the benefits of using technology to facilitate formative assessment explains how four primary school teachers adopted three different apps to make their formative assessment more meaningful and useful.

In Situ Remediation Integrated Program, Evaluation and assessment of containment technology

International Nuclear Information System (INIS)

Gerber, M.A.; Fayer, M.J.

1994-04-01

The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP's Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE's site restoration activities

Next Generation Nuclear Plant Project Preliminary Project Management Plan

International Nuclear Information System (INIS)

Dennis J. Harrell

2006-01-01

This draft preliminary project management plan presents the conceptual framework for the Next Generation Nuclear Plant (NGNP) Project, consistent with the authorization in the Energy Policy Act of 2005. In developing this plan, the Idaho National Laboratory has considered three fundamental project planning options that are summarized in the following section. Each of these planning options is literally compliant with the Energy Policy Act of 2005, but each emphasizes different approaches to technology development risks, design, licensing and construction risks, and to the extent of commercialization support provided to the industry. The primary focus of this draft preliminary project management plan is to identify those activities important to Critical Decision-1, at which point a decision on proceeding with the NGNP Project can be made. The conceptual project framework described herein is necessary to establish the scope and priorities for the technology development activities. The framework includes: A reference NGNP prototype concept based on what is judged to be the lowest risk technology development that would achieve the needed commercial functional requirements to provide an economically competitive nuclear heat source and hydrogen production capability. A high-level schedule logic for design, construction, licensing, and acceptance testing. This schedule logic also includes an operational shakedown period that provides proof-of-principle to establish the basis for commercialization decisions by end-users. An assessment of current technology development plans to support Critical Decision-1 and overall project progress. The most important technical and programmatic uncertainties (risks) are evaluated, and potential mitigation strategies are identified so that the technology development plans may be modified as required to support ongoing project development. A rough-order-of-magnitude cost evaluation that provides an initial basis for budget planning. This

Mountaineer Commercial Scale Carbon Capture and Storage Project Topical Report: Preliminary Public Design Report

Energy Technology Data Exchange (ETDEWEB)

Guy Cerimele

2011-09-30

This Preliminary Public Design Report consolidates for public use nonproprietary design information on the Mountaineer Commercial Scale Carbon Capture & Storage project. The report is based on the preliminary design information developed during the Phase I - Project Definition Phase, spanning the time period of February 1, 2010 through September 30, 2011. The report includes descriptions and/or discussions for: (1) DOE's Clean Coal Power Initiative, overall project & Phase I objectives, and the historical evolution of DOE and American Electric Power (AEP) sponsored projects leading to the current project; (2) Alstom's Chilled Ammonia Process (CAP) carbon capture retrofit technology and the carbon storage and monitoring system; (3) AEP's retrofit approach in terms of plant operational and integration philosophy; (4) The process island equipment and balance of plant systems for the CAP technology; (5) The carbon storage system, addressing injection wells, monitoring wells, system monitoring and controls logic philosophy; (6) Overall project estimate that includes the overnight cost estimate, cost escalation for future year expenditures, and major project risks that factored into the development of the risk based contingency; and (7) AEP's decision to suspend further work on the project at the end of Phase I, notwithstanding its assessment that the Alstom CAP technology is ready for commercial demonstration at the intended scale.

myTREEHOUSE Self-Concept Assessment: preliminary psychometric analysis of a new self-concept assessment for children with cerebral palsy.

Science.gov (United States)

Cheong, Sau Kuan; Lang, Cathryne P; Hemphill, Sheryl A; Johnston, Leanne M

2017-06-01

To evaluate the preliminary validity and reliability of the myTREEHOUSE Self-Concept Assessment for children with cerebral palsy (CP) aged 8 to 12 years. The myTREEHOUSE Self-Concept Assessment includes 26 items divided into eight domains, assessed across three Performance Perspectives (Personal, Social, and Perceived) and an additional Importance Rating. Face and content validity was assessed by semi-structured interviews with seven expert professionals regarding the assessment construct, content, and clinical utility. Reliability was assessed with 50 children aged 8 to 12 years with CP (29 males, 21 females; mean age 10y 2mo; Gross Motor Function Classification System [GMFCS] level I=35, II=8, III=5, IV=1; mean Wechsler Intelligence Scale for Children - Fourth Edition [WISC-IV]=104), whose data was used to calculate internal consistency of the scale, and a subset of 35 children (20 males, 15 females; mean age 10y 5mo; GMFCS level I=26, II=4, III=4, IV=1; mean WISC-IV=103) who participated in test-retest reliability within 14 to 28 days. Face and content validity was supported by positive expert feedback, with only minor adjustments suggested to clarify the wording of some items. After these amendments, strong internal consistency (Cronbach's α 0.84-0.91) and moderate to good test-retest reliability (intraclass correlation coefficient 0.64-0.75) was found for each component. The myTREEHOUSE Self-Concept Assessment is a valid and reliable assessment of self-concept for children with CP aged 8 to 12 years. © 2017 Mac Keith Press.

Health technology assessment, value-based decision making, and innovation.

Science.gov (United States)

Henshall, Chris; Schuller, Tara

2013-10-01

Identifying treatments that offer value and value for money is becoming increasingly important, with interest in how health technology assessment (HTA) and decision makers can take appropriate account of what is of value to patients and to society, and in the relationship between innovation and assessments of value. This study summarizes points from an Health Technology Assessment International (HTAi) Policy Forum discussion, drawing on presentations, discussions among attendees, and background papers. Various perspectives on value were considered; most place patient health at the core of value. Wider elements of value comprise other benefits for: patients; caregivers; the health and social care systems; and society. Most decision-making systems seek to take account of similar elements of value, although they are assessed and combined in different ways. Judgment in decisions remains important and cannot be replaced by mathematical approaches. There was discussion of the value of innovation and of the effects of value assessments on innovation. Discussion also included moving toward "progressive health system decision making," an ongoing process whereby evidence-based decisions on use would be made at various stages in the technology lifecycle. Five actions are identified: (i) development of a general framework for the definition and assessment of value; development by HTA/coverage bodies and regulators of (ii) disease-specific guidance and (iii) further joint scientific advice for industry on demonstrating value; (iv) development of a framework for progressive licensing, usage, and reimbursement; and (v) promoting work to better adapt HTA, coverage, and procurement approaches to medical devices.

Understanding the CDM's contribution to technology transfer

International Nuclear Information System (INIS)

Schneider, Malte; Holzer, Andreas; Hoffmann, Volker H.

2008-01-01

Developing countries are increasingly contributing to global greenhouse gas emissions and, consequently, climate change as a result of their rapid economic growth. In order to reduce their impact, the private sector needs to be engaged in the transfer of low-carbon technology to those countries. The Clean Development Mechanism (CDM) is currently the only market mechanism aimed at triggering changes in the pattern of emissions-intensive activities in developing countries and is likely to play a role in future negotiations. In this paper, we analyse how the CDM contributes to technology transfer. We first develop a framework from the literature that delineates the main factors which characterise technology transfer. Second, we apply this framework to the CDM by assessing existing empirical studies and drawing on additional expert interviews. We find that the CDM does contribute to technology transfer by lowering several technology-transfer barriers and by raising the transfer quality. On the basis of this analysis, we give preliminary policy recommendations

Information Technology Sector Baseline Risk Assessment

Science.gov (United States)

2009-08-01

alternative root be economically advantageous , an actor’s ability to exploit market forces and create an alternative root would be significantly improved...conduct their operations. Therefore, a loss or disruption to Internet services would not be advantageous for the desired outcomes of these syndicates.26... eCommerce Service loss or disruption [C] Traffic Redirection [C] = Undesired consequence Information Technology Sector Baseline Risk Assessment

Preliminary Accident Analyses for Conversion of the Massachusetts Institute of Technology Reactor (MITR) from Highly Enriched to Low Enriched Uranium

Energy Technology Data Exchange (ETDEWEB)

Dunn, Floyd E. [Argonne National Lab. (ANL), Argonne, IL (United States); Olson, Arne P. [Argonne National Lab. (ANL), Argonne, IL (United States); Wilson, Erik H. [Argonne National Lab. (ANL), Argonne, IL (United States); Sun, Kaichao S. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Newton, Jr., Thomas H. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Hu, Lin-wen [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2013-09-30

The Massachusetts Institute of Technology Reactor (MITR-II) is a research reactor in Cambridge, Massachusetts designed primarily for experiments using neutron beam and in-core irradiation facilities. It delivers a neutron flux comparable to current LWR power reactors in a compact 6 MW core using Highly Enriched Uranium (HEU) fuel. In the framework of its non-proliferation policies, the international community presently aims to minimize the amount of nuclear material available that could be used for nuclear weapons. In this geopolitical context most research and test reactors, both domestic and international, have started a program of conversion to the use of LEU fuel. A new type of LEU fuel based on an alloy of uranium and molybdenum (U-Mo) is expected to allow the conversion of U.S. domestic high performance reactors like MITR. This report presents the preliminary accident analyses for MITR cores fueled with LEU monolithic U-Mo alloy fuel with 10 wt% Mo. Preliminary results demonstrate adequate performance, including thermal margin to expected safety limits, for the LEU accident scenarios analyzed.

A preliminary assessment of the potential risks from electrical ...

African Journals Online (AJOL)

... Grey-crowned Crane Balearica regulorum, Lesser Flamingo Phoeniconaias minor, White-backed Vulture Gyps africanus, Rüppell's Vulture Gyps rueppellii, Martial Eagle Polemaetus bellicosus, White Stork Ciconia ciconia, Secretarybird Sagittarius serpentarius, and various sit-and-wait raptors. These preliminary findings ...

An Instrument to Assess Self-Statements During Public Speaking: Scale Development and Preliminary Psychometric Properties

Science.gov (United States)

Hofmann, Stefan G.; DiBartolo, Patricia Marten

2006-01-01

Public speaking is the most commonly reported fearful social situation. Although a number of contemporary theories emphasize the importance of cognitive processes in social anxiety, there is no instrument available to assess fearful thoughts experienced during public speaking. The Self-Statements During Public Speaking (SSPS) scale is a 10-item questionnaire consisting of two 5-item subscales, the “Positive Self-Statements” (SSPS-P) and the “Negative Self-Statements” subscale (SSPS-N). Four studies report on the development and the preliminary psychometric properties of this instrument. PMID:16763666

Health technology assessment to optimize health technology utilization: using implementation initiatives and monitoring processes.

Science.gov (United States)

Frønsdal, Katrine B; Facey, Karen; Klemp, Marianne; Norderhaug, Inger Natvig; Mørland, Berit; Røttingen, John-Arne

2010-07-01

The way in which a health technology is used in any particular health system depends on the decisions and actions of a variety of stakeholders, the local culture, and context. In 2009, the HTAi Policy Forum considered how health technology assessment (HTA) could be improved to optimize the use of technologies (in terms of uptake, change in use, or disinvestment) in such complex systems. In scoping, it was agreed to focus on initiatives to implement evidence-based guidance and monitoring activities. A review identified systematic reviews of implementation initiatives and monitoring activities. A two-day deliberative workshop was held to discuss key papers, members' experiences, and collectively address key questions. This consensus paper was developed by email and finalized at a postworkshop meeting. Evidence suggests that the impact and use of HTA could be increased by ensuring timely delivery of relevant reports to clearly determined policy receptor (decision-making) points. To achieve this, the breadth of assessment, implementation initiatives such as incentives and targeted, intelligent dissemination of HTA result, needs to be considered. HTA stakeholders undertake a variety of monitoring activities, which could inform optimal use of a technology. However, the quality of these data varies and is often not submitted to an HTA. Monitoring data should be sufficiently robust so that they can be used in HTA to inform optimal use of technology. Evidence-based implementation initiatives should be developed for HTA, to better inform decision makers at all levels in a health system about the optimal use of technology.

The political economy of the assessment of value of new health technologies.

Science.gov (United States)

Karnon, Jonathan; Edney, Laura; Afzali, Hossein

2018-04-01

Health technology assessment provides a common framework for evaluating the costs and benefits of new health technologies to inform decisions on the public funding of new pharmaceuticals and other health technologies. In Australia and England, empirical analyses of the opportunity costs of government spending on new health technologies suggest more quality adjusted life years are being forgone than are being gained by a non-trivial proportion of funded health technologies. This essay considers the relevance of available empirical estimates of opportunity costs and explores the relationship between the public funding of health technologies and broader political and economic factors. We conclude that the benefits of a general reduction in the prices paid by governments for new technologies outweigh the costs, but evidence of informed public acceptance of reduced access to new health technologies may be required to shift the current approach to assessing the value of new health technologies.

Radioactive waste shredding: Preliminary evaluation

International Nuclear Information System (INIS)

Soelberg, N.R.; Reimann, G.A.

1994-07-01

The critical constraints for sizing solid radioactive and mixed wastes for subsequent thermal treatment were identified via a literature review and a survey of shredding equipment vendors. The types and amounts of DOE radioactive wastes that will require treatment to reduce the waste volume, destroy hazardous organics, or immobilize radionuclides and/or hazardous metals were considered. The preliminary steps of waste receipt, inspection, and separation were included because many potential waste treatment technologies have limits on feedstream chemical content, physical composition, and particle size. Most treatment processes and shredding operations require at least some degree of feed material characterization. Preliminary cost estimates show that pretreatment costs per unit of waste can be high and can vary significantly, depending on the processing rate and desired output particle size

Health Monitoring System Technology Assessments: Cost Benefits Analysis

Science.gov (United States)

Kent, Renee M.; Murphy, Dennis A.

2000-01-01

The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

Mixed Waste Integrated Program: A technology assessment for mercury-containing mixed wastes

International Nuclear Information System (INIS)

Perona, J.J.; Brown, C.H.

1993-03-01

The treatment of mixed wastes must meet US Environmental Protection Agency (EPA) standards for chemically hazardous species and also must provide adequate control of the radioactive species. The US Department of Energy (DOE) Office of Technology Development established the Mixed Waste Integrated Program (MWIP) to develop mixed-waste treatment technology in support of the Mixed Low-Level Waste Program. Many DOE mixed-waste streams contain mercury. This report is an assessment of current state-of-the-art technologies for mercury separations from solids, liquids, and gases. A total of 19 technologies were assessed. This project is funded through the Chemical-Physical Technology Support Group of the MWIP

Decision Gate Process for Assessment of a NASA Technology Development Portfolio

Science.gov (United States)

Kohli, Rajiv; Fishman, Julianna L.; Hyatt, Mark J.

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to Technology Readiness Level (TRL) 6) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, to reduce life cycle cost and risk, and to increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product was either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

A preliminary assessment of the radiological impact of the Chernobyl reactor accident on the population of the European Community

International Nuclear Information System (INIS)

Morrey, M.; Brown, J.; Williams, J.A.; Crick, M.J.; Simmonds, J.R.; Hill, M.D.

1988-01-01

Following the Chernobyl accident the Commission of the European Communities asked the National Radiological Protection Board to carry out a preliminary assessment of the radiological consequences of the accident on the population of the European Community (EC). The aim of the study was to review information on the environmental contamination measured in member states of the EC; to make a preliminary assessment of individual and population doses for each country; to make an estimate of the resulting health impact and to indicate the effects of the various countermeasures taken by member states in terms of the reductions in both individual and population exposure which they produced. All of the main pathways by which people have been and will be exposed to radiation as a result of the accident were included in the assessment. The impact estimate is based on environmental measurements made during the month after the accident, and on calculations made using mathematical models of radionuclide transfer through the environment. The calculated effective doses to average individuals in EC countries from exposure over the next 50 years range from 0.3 μSv (in Portugal) to between about 300 and 500 μSv (in the FRG, Italy and Greece). The total collective effective dose to the population of EC countries, integrated over all time, is estimated to be about 80 000 man Sv. This may be compared to the collective effective dose from natural background radiation of about 500 000 man Sv every year. In some countries, the restrictions placed on consumption of some foods are estimated to have been effective in reducing doses to the most exposed individuals; the reduction being up to about a factor of 2. The results presented in this paper should therefore be regarded as preliminary

Game-like Technology Innovation Education

DEFF Research Database (Denmark)

Magnussen, Rikke

2011-01-01

scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also...

Development and preliminary experimental study on micro-stacked insulator

International Nuclear Information System (INIS)

Ren Chengyan; Yuan Weiqun; Zhang Dongdong; Yan Ping; Wang Jue

2009-01-01

High gradient insulating technology is one of the key technologies in new type dielectric wall accelerator(DWA). High gradient insulator, namely micro-stacked insulator, was developed and preliminary experimental study was done. Based on the finite element and particle simulating method, surface electric field distribution and electron movement track of micro-stacked insulator were numerated, and then the optimized design proposal was put forward. Using high temperature laminated method, we developed micro-stacked insulator samples which uses exhaustive fluorinated ethylene propylene(FEP) as dielectric layer and stainless steel as metal layer. Preliminary experiment of vacuum surface flashover in nanosecond pulse voltage was done and micro-stacked insulator exhibited favorable vacuum surface flashover performance with flashover field strength of near 180 kV/cm. (authors)

Technology assessment of various coal-fuel options

International Nuclear Information System (INIS)

Coenen, R.; Findling, B.; Klein-Vielhauer, S.; Nieke, E.; Paschen, H.; Tangen, H.; Wintzer, D.

1991-01-01

The technology assessment (TA) study of coal-based fuels presented in this report was performed for the Federal Ministry for Research and Technology. Its goal was to support decision-making of the Federal Ministry for Research and Technology in the field of coal conversion. Various technical options of coal liquefaction have been analyzed on the basis of hard coal as well as lignite -- direct liquefaction of coal (hydrogenation) and different possibilities of indirect liquefaction, that is the production of fuels (methanol, gasoline) by processing products of coal gasification. The TA study takes into consideration the entire technology chain from coal mining via coal conversion to the utilization of coal-based fuels in road transport. The analysis focuses on costs of the various options, overall economic effects, which include effects on employment and public budgets, and on environmental consequences compared to the use of liquid fuels derived from oil. Furthermore, requirements of infrastructure and other problems of the introduction of coal-based fuels as well as prospects for the export of technologies of direct and indirect coal liquefaction have been analyzed in the study. 14 figs., 10 tabs

BBN-Based Portfolio Risk Assessment for NASA Technology R&D Outcome

Science.gov (United States)

Geuther, Steven C.; Shih, Ann T.

2016-01-01

The NASA Aeronautics Research Mission Directorate (ARMD) vision falls into six strategic thrusts that are aimed to support the challenges of the Next Generation Air Transportation System (NextGen). In order to achieve the goals of the ARMD vision, the Airspace Operations and Safety Program (AOSP) is committed to developing and delivering new technologies. To meet the dual challenges of constrained resources and timely technology delivery, program portfolio risk assessment is critical for communication and decision-making. This paper describes how Bayesian Belief Network (BBN) is applied to assess the probability of a technology meeting the expected outcome. The network takes into account the different risk factors of technology development and implementation phases. The use of BBNs allows for all technologies of projects in a program portfolio to be separately examined and compared. In addition, the technology interaction effects are modeled through the application of object-oriented BBNs. The paper discusses the development of simplified project risk BBNs and presents various risk results. The results presented include the probability of project risks not meeting success criteria, the risk drivers under uncertainty via sensitivity analysis, and what-if analysis. Finally, the paper shows how program portfolio risk can be assessed using risk results from BBNs of projects in the portfolio.

Risk assessments for energy systems and role of preliminary degree-of-hazard evaluations

International Nuclear Information System (INIS)

Habegger, L.J.; Fingleton, D.J.

1985-11-01

The appropriate approach to risk or hazard assessment can vary considerably, depending on various factors, including the intended application of the results and the time other resources available to conduct the assessment. This paper illustrates three types of interrelated assessments. Although they can be mutually supportive, they have fundamentally different objectives, which require major differences in approach. The example of the overall risk assessment of alternative major energy technologies illustrates the compilation of a wide range of available risk data applicable to these systems. However, major uncertainties exist in the assessments, and public perception of their importance could play an important role in final system evaluations. A more narrowly defined risk assessment, often focusing on an individual component of a larger system, is the most commonly used approach in regulatory applications. The narrow scope allows in-depth analysis of risks and associated uncertainties, but it may also contribute to a loss of perspective on the magnitude of the assessed risk relative to that of the unassessed risks. In some applications, it is useful to conduct semiquantitative degree-of-hazard evaluations as a means of setting priorities for detailed risk assessment. The MAHAS procedure described in this paper provides a means of rapidly ranking relative hazards from various sources using easily accessible data. However, these rankings should not be used as definitive input for selecting technology alternatives or developing regulations. 25 refs., 6 tabs

Digital assessment of preliminary impression accuracy for edentulous jaws: Comparisons of 3-dimensional surfaces between study and working casts.

Science.gov (United States)

Matsuda, Takashi; Goto, Takaharu; Kurahashi, Kosuke; Kashiwabara, Toshiya; Watanabe, Megumi; Tomotake, Yoritoki; Nagao, Kan; Ichikawa, Tetsuo

2016-07-01

The aim of this study was to compare 3-dimensional surfaces of study and working casts for edentulous jaws and to evaluate the accuracy of preliminary impressions with a view to the future application of digital dentistry for edentulous jaws. Forty edentulous volunteers were serially recruited. Nine dentists took preliminary and final impressions in a routine clinical work-up. The study and working casts were digitized using a dental 3-dimensional scanner. The two surface images were superimposed through a least-square algorithm using imaging software and compared qualitatively. Furthermore, the surface of each jaw was divided into 6 sections, and the difference between the 2 images was quantitatively evaluated. Overall inspection showed that the difference around residual ridges was small and that around borders were large. The mean differences in the upper and lower jaws were 0.26mm and 0.45mm, respectively. The maximum values of the differences showed that the upward change mainly occurred in the anterior residual ridge, and the downward change mainly in the posterior border seal, and the labial and buccal vestibules, whereas every border of final impression was shortened in the lower jaw. The accuracy in all areas except the border, which forms the foundation, was estimated to be less than 0.25mm. Using digital technology, we here showed the overall and sectional accuracy of the preliminary impression for edentulous jaws. In our clinic, preliminary impressions have been made using an alginate material while ensuring that the requisite impression area was covered. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Technology-enabled assessment of health professions education: consensus statement and recommendations from the Ottawa 2010 Conference

DEFF Research Database (Denmark)

Amin, Zubair; Boulet, John R; Cook, David A

2011-01-01

The uptake of information and communication technologies (ICTs) in health professions education can have far-reaching consequences on assessment. The medical education community still needs to develop a deeper understanding of how technology can underpin and extend assessment practices....... This article was developed by the 2010 Ottawa Conference Consensus Group on technology-enabled assessment to guide practitioners and researchers working in this area. This article highlights the changing nature of ICTs in assessment, the importance of aligning technology-enabled assessment with local context...... and needs, the need for better evidence to support use of technologies in health profession education assessment, and a number of challenges, particularly validity threats, that need to be addressed while incorporating technology in assessment. Our recommendations are intended for all practitioners across...

Review of early assessment models of innovative medical technologies.

Science.gov (United States)

Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

2017-08-01

Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Health technology assessment (HTA): definition, role and use in the changing healthcare environment.

Science.gov (United States)

Gallio, D; Berto, P

2007-01-01

The increasing availability of health care technology--boosted by considerable advances in areas like biotechnology, biomaterials, surgical techniques and computer technology--has accompanied burgeoning health care costs, and for this reason an increasing number of subjects (clinicians, health product makers, regulators, patients, hospitals, managers, payers, government leaders) demand for well-founded information to support decisions about development, adoption, acquisition and use of new and existing technologies. Technology assessment is a form of policy research that identifies policy issues, assesses the impact of alternative courses of action, and presents findings. This article is aimed at describing the historical development, reviewing the various definition and classifications, illustrating the purposes Fnd actors of Health Technology Assessment and its possible applications in the current healthcare scenario.

Adapting the helpful responses questionnaire to assess communication skills involved in delivering contingency management: preliminary psychometrics.

Science.gov (United States)

Hartzler, Bryan

2015-08-01

A paper/pencil instrument, adapted from Miller and colleagues' (1991) Helpful Responses Questionnaire (HRQ), was developed to assess clinician skill with core communicative aspects involved in delivering contingency management (CM). The instrument presents a single vignette consisting of six points of client dialogue to which respondents write 'what they would say next.' In the context of an implementation/effectiveness hybrid trial, 19 staff clinicians at an opiate treatment program completed serial training outcome assessments before, following, and three months after CM training. Assessments included this adaptation of the HRQ, a multiple-choice CM knowledge test, and a recorded standardized patient encounter scored for CM skillfulness. Study results reveal promising psychometric properties for the instrument, including strong scoring reliability, internal consistency, concurrent and predictive validity, test-retest reliability and sensitivity to training effects. These preliminary findings suggest the instrument is a viable, practical method to assess clinician skill in communicative aspects of CM delivery. Copyright © 2015 Elsevier Inc. All rights reserved.

Research on simulation technology for CBRN threat assessment system. Prediction technology for atmospheric dispersion of CBRN materials

International Nuclear Information System (INIS)

Miura, Hiroaki; Yano, Masanori; Nakata, Mitsuhiro; Takeda, Masaki

2013-01-01

The technical survey is conducted on the CBRN (Chemical, Biological, Radiological and Nuclear) Threat Assessment System Simulation Technology. The dispersion property of CBRN materials is summarized, and the current simulation techniques for CBRN materials dispersion are described. The effects of advection-diffusion, sedimentation by the gravity, buoyancy and wash-out by rainfall on the dispersion property of CBRN materials should be considered in the simulation modeling. The concentration distribution of CBRN materials is predicted through the meteorological analysis, the flow analysis and the dispersion analysis, and the hazard map will be produced from that. A selection of simulation method, model, domain and number of computational grid points is necessary to perform the simulation, considering the balance between calculation cost and prediction accuracy. For construction of CBRN Threat Assessment System, it is important how to integrate the developed simulation element technologies and threat assessment technologies. (author)

Vulnerability Assessments and Resilience Planning at Federal Facilities. Preliminary Synthesis of Project

Energy Technology Data Exchange (ETDEWEB)

Moss, R. H. [Pacific Northwest National Lab. (PNNL)/Univ. of Maryland, College Park, MD (United States). Joint Global Change Research Inst.; Blohm, A. J. [Univ. of Maryland, College Park, MD (United States); Delgado, A. [Pacific Northwest National Lab. (PNNL)/Univ. of Maryland, College Park, MD (United States). Joint Global Change Research Inst.; Henriques, J. J. [James Madison Univ., Harrisonburg, VA (United States); Malone, E L. [Pacific Northwest National Lab. (PNNL)/Univ. of Maryland, College Park, MD (United States). Joint Global Change Research Inst.

2015-08-15

U.S. government agencies are now directed to assess the vulnerability of their operations and facilities to climate change and to develop adaptation plans to increase their resilience. Specific guidance on methods is still evolving based on the many different available frameworks. Agencies have been experimenting with these frameworks and approaches. This technical paper synthesizes lessons and insights from a series of research case studies conducted by the investigators at facilities of the U.S. Department of Energy and the Department of Defense. The purpose of the paper is to solicit comments and feedback from interested program managers and analysts before final conclusions are published. The paper describes the characteristics of a systematic process for prioritizing needs for adaptation planning at individual facilities and examines requirements and methods needed. It then suggests a framework of steps for vulnerability assessments at Federal facilities and elaborates on three sets of methods required for assessments, regardless of the detailed framework used. In a concluding section, the paper suggests a roadmap to further develop methods to support agencies in preparing for climate change. The case studies point to several preliminary conclusions; (1) Vulnerability assessments are needed to translate potential changes in climate exposure to estimates of impacts and evaluation of their significance for operations and mission attainment, in other words into information that is related to and useful in ongoing planning, management, and decision-making processes; (2) To increase the relevance and utility of vulnerability assessments to site personnel, the assessment process needs to emphasize the characteristics of the site infrastructure, not just climate change; (3) A multi-tiered framework that includes screening, vulnerability assessments at the most vulnerable installations, and adaptation design will efficiently target high-risk sites and infrastructure

An assessment of information communication technology content ...

African Journals Online (AJOL)

An assessment of information communication technology content, context and ... a- vis the upscaling of ICT in health care facilities in Nairobi and Machakos counties. ... high in all the facilities compared to levels of services operations computerised and ... for Authors · for Policy Makers · about Open Access · Journal Quality.

Preliminary assessment of future refining impacts of the Clean Air Act Amendments of 1990

International Nuclear Information System (INIS)

Hadder, G.R.

1991-09-01

A preliminary assessment of the future refining impacts of the Clean Air Act Amendments of 1990 has been performed with the Navy Mobility Fuels Forecasting Systems. The assessment suggests that gasoline reformulation costs in domestic coastal and near-coastal refining regions in the year 2000 could be 3.5 to 5.6 cents per gallon (in terms of 1989 currency). For heating value equivalent to one gallon of conventional gasoline, the regional total added costs (including reformulation costs) for reformulated gasoline could be 5.9 to 8.0 cents. In blending reformulated gasolines, the reduction of butane for lower Reid vapor pressure and the reduction of reformate for lower aromatics are generally compensated by increased percentages of alkylate and/or straight run naphthas. Relatively larger refinery process capacity additions are required for butane isomerization, alkylation, aromatics recovery, and distillate hydrotreating. 21 refs., 3 figs., 18 tabs

Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

Energy Technology Data Exchange (ETDEWEB)

Weber, Jochem W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Laird, Daniel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Costello, Ronan [Wave Venture; Roberts, Jesse [Sandia National Laboratories; Bull, Diana [Sandia National Laboratories; Babarit, Aurelien [Ecole Centrale de Nantes; Nielsen, Kim [Ramboll; Ferreira, Claudio Bittencourt [DNV-GL; Kennedy, Ben [Wave Venture

2017-09-14

This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

Analytical Chemistry Core Capability Assessment - Preliminary Report

International Nuclear Information System (INIS)

Barr, Mary E.; Farish, Thomas J.

2012-01-01

The concept of 'core capability' can be nebulous one. Even at a fairly specific level, where core capability equals maintaining essential services, it is highly dependent upon the perspective of the requestor. Samples are submitted to analytical services because the requesters do not have the capability to conduct adequate analyses themselves. Some requests are for general chemical information in support of R and D, process control, or process improvement. Many analyses, however, are part of a product certification package and must comply with higher-level customer quality assurance requirements. So which services are essential to that customer - just those for product certification? Does the customer also (indirectly) need services that support process control and improvement? And what is the timeframe? Capability is often expressed in terms of the currently utilized procedures, and most programmatic customers can only plan a few years out, at best. But should core capability consider the long term where new technologies, aging facilities, and personnel replacements must be considered? These questions, and a multitude of others, explain why attempts to gain long-term consensus on the definition of core capability have consistently failed. This preliminary report will not try to define core capability for any specific program or set of programs. Instead, it will try to address the underlying concerns that drive the desire to determine core capability. Essentially, programmatic customers want to be able to call upon analytical chemistry services to provide all the assays they need, and they don't want to pay for analytical chemistry services they don't currently use (or use infrequently). This report will focus on explaining how the current analytical capabilities and methods evolved to serve a variety of needs with a focus on why some analytes have multiple analytical techniques, and what determines the infrastructure for these analyses. This information will be

Decentralized peri-urban wastewater treatment technologies assessment integrating sustainability indicators.

Science.gov (United States)

Mena-Ulecia, Karel; Hernández, Heykel Hernández

2015-01-01

Selection of treatment technologies without considering the environmental, economic and social factors associated with each geographical context risks the occurrence of negative impacts that were not properly foreseen, working against the sustainable performance of the technology. The principal aim of this study was to evaluate 12 technologies for decentralized treatment of domestic wastewater applicable to peri-urban communities using sustainability approaches and, at the same time, continuing a discussion about how to address a more integrated assessment of overall sustainability. For this, a set of 13 indicators that embody the environmental, economic and social approach for the overall sustainability assessment were used by means of a target plot diagram as a tool for integrating indicators that represent a holistic analysis of the technologies. The obtained results put forward different degrees of sustainability, which led to the selection of: septic tank+land infiltration; up-flow anaerobic reactor+high rate trickling filter and septic tank+anaerobic filter as the most sustainable and attractive technologies to be applied in peri-urban communities, according to the employed indicators.

Preliminary assessment of the gender aspects of disaster vulnerability and loss of human life in South Africa

OpenAIRE

Tandlich, Roman; Chirenda, Tatenda G; Srinivas, Chandra S S

2013-01-01

South Africa has reached a medium level of human development and has a heterogeneous situation with respect to disaster risk management. In this article, a preliminary assessment of the gender aspects of disaster vulnerability and fatalities is presented. The United Nations, the Health Systems Trust and Statistics South Africa were used as data sources for the following gender-segregated values: the life expectancy at birth, unemployment rates, the human development index values, the maternal...

Ethically sound technology? Guidelines for interactive ethical assessment of personal health monitoring.

Science.gov (United States)

Palm, Elin; Nordgren, Anders; Verweij, Marcel; Collste, Göran

2013-01-01

Novel care-technologies possess a transformational potential. Future care and support may be provided via monitoring technologies such as smart devices, sensors, actors (robots) and Information and Communication Technologies. Such technologies enable care provision outside traditional care institutions, for instance in the homes of patients. Health monitoring may become "personalized" i.e. tailored to the needs of individual care recipients' but may also alter relations between care providers and care recipents, shape and form the care environment and influence values central to health-care. Starting out from a social constructivist theory of technology, an interactive ethical assessment-model is offered. The suggested model supplements a traditional analysis based on normative ethical theory (top-down approach) with interviews including relevant stakeholders (a bottom-up approach). This method has been piloted by small-scale interviews encircling stakeholder perspectives on three emerging technologies: (1) Careousel, a smart medicine-management device, (2) Robot Giraff, an interactive and mobile communication-device and (3) I-Care, a care-software that combines alarm and register system. By incorporating stakeholder perspectives into the analysis, the interactive ethical assessment model provides a richer understanding of the impact of PHM-technologies on ethical values than a traditional top-down model. If the assessment is conducted before the technology has reached the market - preferably in close interaction with developers and users - ethically sound technologies may be obtained.

An Assessment of Petroleum Technology Development Fund (Ptdf ...

African Journals Online (AJOL)

An Assessment of Petroleum Technology Development Fund (Ptdf) ... and other related literature were utilized to elicit information for the research. ... industry and that some of those trained lack the technical know-how to manage the refineries.

European network for health technology assessment, EUnetHTA: planning, development, and implementation of a sustainable European network for health technology assessment

DEFF Research Database (Denmark)

Kristensen, Finn Børlum; Mäkelä, Marjukka; Neikter, Susanna Allgurin

2009-01-01

OBJECTIVES: The European network on Health Technology Assessment (EUnetHTA) aimed to produce tangible and practical results to be used in the various phases of health technology assessment and to establish a framework and processes to support this. This article presents the background, objectives......, and organization of EUnetHTA, which involved a total of sixty-four partner organizations. METHODS: Establishing an effective and sustainable structure for a transnational network involved many managerial, policy, and methodological tools, according to the objective of each task or Work Package. Transparency...... the use of HTA at national and regional levels. Responsiveness to political developments in Europe should be balanced with maintaining a high level of ambition to promote independent, evidence-based information and well-tested tools for best practice based on a strong network of HTA institutions....

Institutionalizing Emerging Technology Assessment Process into National Incident Response

Science.gov (United States)

2013-10-01

mechanical methods, devices, and products, including oil sensors, booms, skimmers, decontamination , and waste minimization technologies...handling). • Alternative Oil Spill Response Technologies (in situ burning , dispersants, etc.). • Oil Spill Damage Assessment and Restoration. The TETs...deaths of eleven crewmembers and a subsequent uncontrolled oil spill that tested the government’s ability to respond to a spill of this magnitude as

Preliminary systems design study assessment report

International Nuclear Information System (INIS)

Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

1991-09-01

The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each concept

Assessing antiquity and turnover of terrestrial ecosystems in eastern North America using fossil pollen data: A preliminary study

International Nuclear Information System (INIS)

Liu Yao; Jackson, Stephen T; Brewer, Simon; Williams, John W

2010-01-01

We explored formal approaches to identifying and interpreting the antiquity and turnover of terrestrial ecosystems in eastern North America using pollen records. Preliminary results of cluster analyses, receiver-operating characteristic (ROC) analyses, and likelihood estimation of ecosystem analog in a simple Bayesian model allow assessment of modern ecosystem antiquities and past ecosystem turnovers. Approaches discussed in this study thus provide a vehicle for further studies.

Preliminary assessment of radiological conditions at the Ranger land application area

International Nuclear Information System (INIS)

Kavasnicka, J.; Bywater, J.

1992-01-01

Some 18 GBq of uranium and 1.5 GBq of 226 Ra were disposed of by land application on the designated disposal area by March 1989. This preliminary study, which is part of a longer-term project, outlines the assessment of external gamma radiation exposures from short-lived gamma-ray emitting decay products of 226 Ra and of internal exposures from inhalation of uranium and 226 Ra resuspended from the soil surface. The effective dose equivalent from these two exposure pathways for an adult member of the public was calculated to be about 0.05 mSv.y -1 (based on a 4 hour per day occupancy of the disposal area). This dose implies a total combined load limit of 490 kBq.m -2 of uranium plus 41 kBq.m -2 of 226 Ra. It is expected that the load limit will be reduced when all pathways and more recent data are taken into the account. 8 refs., 14 tabs., 3 figs

Melter development needs assessment for RWMC buried wastes

International Nuclear Information System (INIS)

Donaldson, A.D.; Carpenedo, R.J.; Anderson, G.L.

1992-02-01

This report presents a survey and initial assessment of the existing state-of-the-art melter technology necessary to thermally treat (stabilize) buried TRU waste, by producing a highly leach resistant glass/ceramic waste form suitable for final disposal. Buried mixed transuranic (TRU) waste at the Idaho National Engineering Laboratory (INEL) represents an environmental hazard requiring remediation. The Environmental Protection Agency (EPA) placed the INEL on the National Priorities List in 1989. Remediation of the buried TRU-contaminated waste via the CERCLA decision process is required to remove INEL from the National Priorities List. A Waste Technology Development (WTD) Preliminary Systems Design and Thermal Technologies Screening Study identified joule-heated and plasma-heated melters as the most probable thermal systems technologies capable of melting the INEL soil and waste to produce the desired final waste form [Iron-Enriched Basalt (IEB) glass/ceramic]. The work reported herein then surveys the state of existing melter technology and assesses it within the context of processing INEL buried TRU wastes and contaminated soils. Necessary technology development work is recommended

Prospective Technology Assessment of Synthetic Biology: Fundamental and Propaedeutic Reflections in Order to Enable an Early Assessment.

Science.gov (United States)

Schmidt, Jan Cornelius

2016-08-01

Synthetic biology is regarded as one of the key technosciences of the future. The goal of this paper is to present some fundamental considerations to enable procedures of a technology assessment (TA) of synthetic biology. To accomplish such an early "upstream" assessment of a not yet fully developed technology, a special type of TA will be considered: Prospective TA (ProTA). At the center of ProTA are the analysis and the framing of "synthetic biology," including a characterization and assessment of the technological core. The thesis is that if there is any differentia specifica giving substance to the umbrella term "synthetic biology," it is the idea of harnessing self-organization for engineering purposes. To underline that we are likely experiencing an epochal break in the ontology of technoscientific systems, this new type of technology is called "late-modern technology." -I start this paper by analyzing the three most common visions of synthetic biology. Then I argue that one particular vision deserves more attention because it underlies the others: the vision of self-organization. I discuss the inherent limits of this new type of late-modern technology in the attempt to control and monitor possible risk issues. I refer to Hans Jonas' ethics and his early anticipation of the risks of a novel type of technology. I end by drawing conclusions for the approach of ProTA towards an early societal shaping of synthetic biology.

Smart City Energy Interconnection Technology Framework Preliminary Research

Science.gov (United States)

Zheng, Guotai; Zhao, Baoguo; Zhao, Xin; Li, Hao; Huo, Xianxu; Li, Wen; Xia, Yu

2018-01-01

to improve urban energy efficiency, improve the absorptive ratio of new energy resources and renewable energy sources, and reduce environmental pollution and other energy supply and consumption technology framework matched with future energy restriction conditions and applied technology level are required to be studied. Relative to traditional energy supply system, advanced information technology-based “Energy Internet” technical framework may give play to energy integrated application and load side interactive technology advantages, as a whole optimize energy supply and consumption and improve the overall utilization efficiency of energy.

Practice parameters facilitating adoption of advanced technologies for enhancing neuropsychological assessment paradigms.

Science.gov (United States)

Parsons, Thomas D; McMahan, Timothy; Kane, Robert

2018-01-01

Clinical neuropsychologists have long underutilized computer technologies for neuropsychological assessment. Given the rapid advances in technology (e.g. virtual reality; tablets; iPhones) and the increased accessibility in the past decade, there is an on-going need to identify optimal specifications for advanced technologies while minimizing potential sources of error. Herein, we discuss concerns raised by a joint American Academy of Clinical Neuropsychology/National Academy of Neuropsychology position paper. Moreover, we proffer parameters for the development and use of advanced technologies in neuropsychological assessments. We aim to first describe software and hardware configurations that can impact a computerized neuropsychological assessment. This is followed by a description of best practices for developers and practicing neuropsychologists to minimize error in neuropsychological assessments using advanced technologies. We also discuss the relevance of weighing potential computer error in light of possible errors associated with traditional testing. Throughout there is an emphasis on the need for developers to provide bench test results for their software's performance on various devices and minimum specifications (documented in manuals) for the hardware (e.g. computer, monitor, input devices) in the neuropsychologist's practice. Advances in computerized assessment platforms offer both opportunities and challenges. The challenges can appear daunting but are a manageable and require informed consumers who can appreciate the issues and ask pertinent questions in evaluating their options.

Harnessing Technology to Assess Oral Communication in Business English

Science.gov (United States)

Levy, Tal; Gertler, Hedy

2015-01-01

Assessing oral skills in relatively large Business English classes seems a most formidable task for any teacher. How does one make sure to get multiple and valid assessments of each student? This action research paper provides supporting evidence for the correlation between the use of technology and students' engagement. This was achieved by…

The impact of health technology assessment reports on decision making in Austria.

Science.gov (United States)

Zechmeister, Ingrid; Schumacher, Ines

2012-01-01

Health technology assessment (HTA) was established in Austria in the 1990s and, since then, it has gained considerable importance. In this study, we aim to analyze whether the HTA reports that have been produced at the Institute for Technology Assessment (ITA) and at the Ludwig Boltzmann Institute for HTA (LBI-HTA) have had an impact on decision making within the Austrian health care system. We selected all reports that were intended for supporting (i) reimbursement/investment or (ii) disinvestment decisions. Eleven full HTA reports and fifty-eight rapid assessments fulfilled the inclusion criteria. We used interview data and administrative data on volumes, tariffs and expenditure of products/services to analyze whether and how reports were in reality used in decision making and what the consequences for health care expenditure and resource distribution have been. Five full HTA reports and fifty-six rapid technology assessments were used for reimbursement decisions. Four full HTA reports and two rapid assessments were used for disinvestment decisions and resulted in reduced volumes and expenditure. Two full HTA reports showed no impact on decision making. Impact was most evident for hospital technologies. HTA has played some role in reducing volumes of over-supplied hospital technologies, resulting in reduced expenditure for several hospital providers. Additionally, it has been increasingly included in prospective planning and reimbursement decisions of late, indicating re-distribution of resources toward evidence-based technologies. However, further factors may have influenced the decisions, and the impact could be considerably increased by systematically incorporating HTA into the decision-making process in Austria.

System driven technology selection for future European launch systems

Science.gov (United States)

Baiocco, P.; Ramusat, G.; Sirbi, A.; Bouilly, Th.; Lavelle, F.; Cardone, T.; Fischer, H.; Appel, S.

2015-02-01

In the framework of the next generation launcher activity at ESA, a top-down approach and a bottom-up approach have been performed for the identification of promising technologies and alternative conception of future European launch vehicles. The top-down approach consists in looking for system-driven design solutions and the bottom-up approach features design solutions leading to substantial advantages for the system. The main investigations have been focused on the future launch vehicle technologies. Preliminary specifications have been used in order to permit sub-system design to find the major benefit for the overall launch system. The development cost, non-recurring and recurring cost, industrialization and operational aspects have been considered as competitiveness factors for the identification and down-selection of the most interesting technologies. The recurring cost per unit payload mass has been evaluated. The TRL/IRL has been assessed and a preliminary development plan has been traced for the most promising technologies. The potentially applicable launch systems are Ariane and VEGA evolution. The main FLPP technologies aim at reducing overall structural mass, increasing structural margins for robustness, metallic and composite containment of cryogenic hydrogen and oxygen propellants, propellant management subsystems, elements significantly reducing fabrication and operational costs, avionics, pyrotechnics, etc. to derive performing upper and booster stages. Application of the system driven approach allows creating performing technology demonstrators in terms of need, demonstration objective, size and cost. This paper outlines the process of technology down selection using a system driven approach, the accomplishments already achieved in the various technology fields up to now, as well as the potential associated benefit in terms of competitiveness factors.

Human factors assessments of D and D technologies

International Nuclear Information System (INIS)

Carpenter, C.P.; Evans, T.T.; McCabe, B.

2000-01-01

On April 2, 1997, the US Secretary of Energy directed the US Assistant Secretary of Environmental Management and of Safety and Health to require field input of appropriate data to ensure that safety and health considerations were properly addressed in the Accelerating Cleanup: Focus on 2006 Plan. The US Department of Energy (DOE) field managers have committed to the Secretary that they will fully implement integrated safety management systems (ISMSs) at their respective sites by the end of fiscal year 1999. The Secretary has further directed that headquarters safety and health guidance be developed to support consistent and comprehensive project baseline summaries from the field. The Secretary has committed to institutionalizing ISMS as an integral component of the way the DOE conducts its business. The Defense Nuclear Facilities Safety Board continues to oversee and closely monitor the DOE's commitment to the safety and health of its workers. The DOE is committed to a management system approach to ensure that work is performed in a manner that protects the worker, public, and environment. The Deactivation and Decommissioning Focus Area (DDFA) is actively addressing the need to incorporate environmental safety and health (ES and H) considerations in developing technologies. The DDFA is partnered with the Operating Engineers National Hazmat Program (OENHP) to evaluate the ES and H considerations of the innovative and improved decontamination and decommissioning technologies. Part of the implementation of the ES and H work practices in the field is through a cooperative agreement between the National Energy Technology Laboratory (NETL) and the OENHP. The objective of this program is to establish an International Environmental Technology and Training Center to conduct human factors assessments and protocols on environmental technologies. The intent of the human factors assessments is to enhance the effectiveness and efficiency of the technologies and to enhance

Preliminary biogeochemical assessment of EPICA LGM and Holocene ice samples

Science.gov (United States)

Bulat, S.; Alekhina, I.; Marie, D.; Wagenbach, D.; Raynaud, D.; Petit, J. R.

2009-04-01

weak signals were possible to generate which are now under cloning. The signals were hard to reproduce because of rather low volume of samples. More ice volume is needed to get the biosignal stronger and reproducible. Meantime we are adjusting PCR and in addition testing DNA repair-enzyme cocktail in case of DNA damage. As a preliminary conclusion we would like to highlight the following. Both Holocene and LGM ice samples (EDC99 and EDML) are very clean in terms of Ultra low biomass and Ultra low DOC content. The most basal ice of EDC and EDML ice cores could help in assessing microbial biomass and diversity if present under the glacier at the ice-bedrock boundary. * The present-day consortium includes S. Bulat, I. Alekhina, P. Normand, D. Prieur, J-R. Petit and D. Raynaud (France) and E. Willerslev and J.P. Steffensen (Denmark)

Technology Assessment for Powertrain Components Final Report CRADA No. TC-1124-95

Energy Technology Data Exchange (ETDEWEB)

Tokarz, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gough, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-19

LLNL utilized its defense technology assessment methodologies in combination with its capabilities in the energy; manufacturing, and transportation technologies to demonstrate a methodology that synthesized available but incomplete information on advanced automotive technologies into a comprehensive framework.

Preliminary report for the license of a hot cell that will be use in the technology development for the obtention of Mo-99

International Nuclear Information System (INIS)

Fucugauchi, L.A.; Millan S, S.; Lopez M, A.E.; Lopez C, R; Sanchez M, V.; Reynoso V, R.; Vera, A.

1991-05-01

A preliminary report for the license of a hot cell that will be used in the development of the technology for the obtaining of Mo-99 is presented. The following topics are also included: objective of the project, technical description, description of the prototype cell, handling of radioactive wastes, lists of equipment that will be used, risk analysis, curricula, quality assurance plan and an annex with the report on handling of radioactive wastes presented to the PAGD-IAEA. (Author)

Health technology assessment: research trends and future priorities in Europe.

Science.gov (United States)

Nielsen, Camilla Palmhøj; Funch, Tina Maria; Kristensen, Finn Børlum

2011-07-01

To provide an overview of health services research related to health technology assessment (HTA) and to identify research priorities from a European perspective. Several methods were used: systematic review of articles indexed with the MeSH term 'technology assessment' in PubMed from February 1999-2009; online survey among experts; and conference workshop discussions. Research activity in HTA varies considerably across Europe. The research was categorised into six areas: (1) the breadth of analysis in HTA (such as economic, organizational and social aspects); (2) HTA products developed to meet the needs of policy-makers (such as horizon scanning, mini-HTA, and core HTA); (3) handling life-cycle perspectives in relation to technologies; (4) topics that challenge existing methods and for which HTA should be developed to address the themes more comprehensively (such as public health interventions and organizational interventions); (5) development of HTA capacity and programmes; and (6) links between policy and HTA. An online survey showed that the three areas that were given priority were the relationship between HTA and policy-making (71%), the impact of HTA (62%) and incorporating patient aspects in HTA (50%). Policy-makers highlighted HTA and innovation processes as their main research priority (42%). Areas that the systematic review identified as future priorities include issues within the six existing research areas such as disinvestment, developing evidence for new technologies, assessing the wider effects of technology use, and determining how HTA affects decision-making. In addition, relative effectiveness and individualized treatments are areas of growing interest. The research priorities identified are important for obtaining high quality and cost-effective health care in Europe. Managing the introduction, use and phasing out of technologies challenges health services throughout Europe, and these processes need to be improved to successfully manage future

Development and assessment of closure technology for liquid-waste disposal sites

International Nuclear Information System (INIS)

Phillips, S.J.; Relyea, J.F.; Seitz, R.R.; Cammann, J.W.

1990-01-01

Discharge of low-level liquid wastes into soils was practiced previously at the Hanford Site. Technologies for long-term confinement of subsurface contaminants are needed. Additionally, methods are needed to assess the effectiveness of confinement technologies in remediating potentially diverse environmental conditions. Recently developed site remediation systems and assessment methods for in situ stabilization and isolation of radioactive and other contaminants within and below low-level liquid-waste disposal structures are summarized

Study design for concurrent development, assessment, and implementation of new diagnostic imaging technology

NARCIS (Netherlands)

M.G.M. Hunink (Myriam); G.P. Krestin (Gabriel)

2002-01-01

textabstractWith current constraints on health care resources and emphasis on value for money, new diagnostic imaging technologies must be assessed and their value demonstrated. The state of the art in the field of diagnostic imaging technology assessment advocates a hierarchical

Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

DEFF Research Database (Denmark)

Gachango, Florence Gathoni

Intensive agricultural production in most parts of the world especially in the more developed countries continues to mount pressure on water resources thereby threatening the quality of life in the aquatic ecosystems. With stringent standards such as those stipulated in the European Union Water...... Framework Directive (EU WFD), introduced to address the water quality problem the situation calls for solutions that would reconcile these two conflicting issues. “End-of-pipe” filter technologies that would disconnect agricultural drainage pathway before it gets to the aquatic environment have been...... proposed as appropriate solutions to this problem in the Danish context. The feasibility of these technologies with regards to their cost-effectiveness in nutrient mitigation, farmers’ adoption behavior, and environmental policy implementation is assessed in this thesis. The thesis comprises of four papers...

A needs assessment for mobile technology use in medical education

OpenAIRE

Shahrzad Vafa; Diane E. Chico

2013-01-01

Objectives: This study investigated how medical students perceived mobile technology as a component of their learning experience and identified barriers to the use of mobile technology in education. Methods: An anonymous survey developed by EDUCAUSE was distributed to 1000 first year medical students (M1s) at two separate medical schools during three consecutive academic years, 2010 to 2013. The 25-item questionnaire assessed student use of mobile devices, student interest in mobile technolog...

IMPLEMENTATION OF HEALTH TECHNOLOGY ASSESSMENT WORK IN A HOSPITAL IN KAZAKHSTAN.

Science.gov (United States)

Kosherbayeva, Lyazzat; Hailey, David; Kurakbaev, Kural; Tsoy, Aleksey; Zhuzzhanov, Ormanbek; Donbay, Abilay; Kumar, Ainur; Nadyrov, Kamalzhan

2016-01-01

The aim of this study was to implement health technology assessment (HA) in the First General City Hospital in Astana, Kazakhstan. We organized trainings to familiarize hospital staff with the purpose and details of HTA. An HTA committee was established, with representation from hospital physicians and managers, and criteria for prioritization of health technologies determined. Clinical departments of the hospital were asked to prepare applications for new technologies for their services. The HTA committee reviewed five applications and selected a technology from one of these, on single incision laparoscopic surgery (SILS), for assessment. A short HTA report on SILS was prepared, covering its safety, clinical effectiveness, and cost effectiveness. The report was used to support a request to the Department of Health for additional funding to implement this technology within the hospital. This funding was approved and SILS was established in several hospital departments. This successful initial experience with HTA has paved the way for its routine use by the hospital for informing decisions on the procurement and use of new health technologies.

Shedding light on solar technologies-A techno-economic assessment and its policy implications

International Nuclear Information System (INIS)

Peters, Michael; Schmidt, Tobias S.; Wiederkehr, David; Schneider, Malte

2011-01-01

Solar power technologies will have to become a major pillar in the world's future energy system to combat climate change and resource depletion. However, it is unclear which solar technology is and will prove most viable. Therefore, a comprehensive comparative assessment of solar technologies along the key quantitative and qualitative competitiveness criteria is needed. Based on a literature review and detailed techno-economic modeling for 2010 and 2020 in five locations, we provide such an assessment for the three currently leading large-scale solar technologies. We show that today these technologies cannot yet compete with conventional forms of power generation but approach competitiveness around 2020 in favorable locations. Furthermore, from a global perspective we find that none of the solar technologies emerges as a clear winner and that cost of storing energy differs by technology and can change the order of competitiveness in some instances. Importantly, the competitiveness of the different technologies varies considerably across locations due to differences in, e.g., solar resource and discount rates. Based on this analysis, we discuss policy implications with regard to fostering the diffusion of solar technologies while increasing the efficiency of policy support through an adequate geographical allocation of solar technologies. - Highlights: → We conduct a comprehensive comparative assessment of solar technologies (CSP/PV). → While solar technologies approach competitiveness in 2020, no clear winner emerges. → Solar resource and discount rate heavily impact competitiveness of solar technologies. → Adequate geographical allocation of solar technologies increases policy efficiency. → Focus on key cost down levers and strategic co-benefits of solar technologies needed.

A Preliminary Assessment of Social Vulnerability in Ganga-Brahmaputra-Meghna Delta

Science.gov (United States)

Hazra, Sugata; Islam, Nabiul

2017-04-01

The Ganga-Brahmaputra-Meghna (GBM) Delta has a high population density and is exposed to rapid environmental changes making it one of the most stressed deltas in the world. The low-lying coastal areas of the Ganga-Brahmaputra-Meghna (GBM) Delta comprise 19 coastal districts of Bangladesh and two districts in India with significant land areas within 5 meters of sea level has a population of more than 50 million people at an average population density of 1100 people/km2. This population is exposed to a range of hazards such as severe cyclones, coastal erosion, and salinization, exacerbated by climate change and subsidence which imply severe stress on the resource dependent community of this region. This situation is further complicated by poverty and limited social well-being such as poor access to education/ health/ drinking water/ sanitation facilities, and lack of food and energy security. Thus assessing social vulnerability can help to understand which communities are susceptible to environmental change and guide adaptation actions to address these threats. This preliminary study aims to construct a socio-economic index by assessing the social vulnerability of coastal communities of GBM Delta taking consistent and common secondary data from the Census of India and the Bangladesh Bureau of Statisticsand applyinga Principle Component Analysis(PCA) methodology. Several statistical tests like Kaiser-Meyer-Olkin (KMO) have also been used to assess the appropriateness of using PCA. Among the selected common indicators, five major components are found to explain majority of the total variation of social vulnerability across the delta: (1) poverty, (2) dependency ratio, (3) agriculture dependency, (4) lack of sanitation and (5) existence of mud houses. The most important observation is the existence of a social vulnerability gradient across the coast. In other words, socially marginalised and vulnerable communities are found on the Delta margin in both India and

A Preliminary Assessment of a Deep Borehole disposal of Spent Fuels

International Nuclear Information System (INIS)

Lee, Younmyoung; Jeon, Jongtae

2014-01-01

Deep borehole disposal (DBD) of such radioactive waste as spent nuclear fuels (SFs) and other waste forms has been investigating mainly at Sandia National Labs for the US DOE as an alternative option. DBD can give advantages over less deep geological disposal since the disposal of wastes at a great depth where a low degree of permeability in the potentially steady rock condition will be beneficial for nuclide movement. Groundwater in the deep basement rock can even have salinity and less chance to mix with groundwater above. The DBD concept is quite straightforward and even simple: Waste canisters are simply emplaced in the lower 2 km part of the borehole down to 5 km deep. Through this study, a conceptual DBD is assessed for a similar case as the US DOE's approach, in which 400 SF canisters are to be emplaced at a deep bottom between 3km and 5km depths, upon which an additional 1km-thick compacted bentonite is overbuffered, and the remaining upper part of the borehole is backfilled again with a mixture of crushed rock and bentonite. Then, the total 5km-deep borehole has three zones: a disposal zone at the bottom 2km, a buffer zone at the next 1km, and backfill zone at the rest top 2km, as illustrated conceptually in Fig. 1. To demonstrate the feasibility in view of long-term radiological safety, a rough model for a safety assessment of this conceptual deep borehole repository system, providing detailed models for nuclide transport in and around the geosphere and biosphere under normal nuclide release scenarios that can occur after a closure of the repository, has been developed using GoldSim. A simple preliminary result in terms of the dose exposure rate from a safety assessment of the DBD is also presented and compared to the case of direct disposal of SFs in a KBS-3V vertical type repository, carried out in previous studies. For different types and shapes of repositories at each different depth, direct comparison between a DBD and a KBS-3 type disposal of

A Preliminary Assessment of a Deep Borehole disposal of Spent Fuels

Energy Technology Data Exchange (ETDEWEB)

Lee, Younmyoung; Jeon, Jongtae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Deep borehole disposal (DBD) of such radioactive waste as spent nuclear fuels (SFs) and other waste forms has been investigating mainly at Sandia National Labs for the US DOE as an alternative option. DBD can give advantages over less deep geological disposal since the disposal of wastes at a great depth where a low degree of permeability in the potentially steady rock condition will be beneficial for nuclide movement. Groundwater in the deep basement rock can even have salinity and less chance to mix with groundwater above. The DBD concept is quite straightforward and even simple: Waste canisters are simply emplaced in the lower 2 km part of the borehole down to 5 km deep. Through this study, a conceptual DBD is assessed for a similar case as the US DOE's approach, in which 400 SF canisters are to be emplaced at a deep bottom between 3km and 5km depths, upon which an additional 1km-thick compacted bentonite is overbuffered, and the remaining upper part of the borehole is backfilled again with a mixture of crushed rock and bentonite. Then, the total 5km-deep borehole has three zones: a disposal zone at the bottom 2km, a buffer zone at the next 1km, and backfill zone at the rest top 2km, as illustrated conceptually in Fig. 1. To demonstrate the feasibility in view of long-term radiological safety, a rough model for a safety assessment of this conceptual deep borehole repository system, providing detailed models for nuclide transport in and around the geosphere and biosphere under normal nuclide release scenarios that can occur after a closure of the repository, has been developed using GoldSim. A simple preliminary result in terms of the dose exposure rate from a safety assessment of the DBD is also presented and compared to the case of direct disposal of SFs in a KBS-3V vertical type repository, carried out in previous studies. For different types and shapes of repositories at each different depth, direct comparison between a DBD and a KBS-3 type disposal of

Novel sensing technology in fall risk assessment in older adults: a systematic review.

Science.gov (United States)

Sun, Ruopeng; Sosnoff, Jacob J

2018-01-16

Falls are a major health problem for older adults with significant physical and psychological consequences. A first step of successful fall prevention is to identify those at risk of falling. Recent advancement in sensing technology offers the possibility of objective, low-cost and easy-to-implement fall risk assessment. The objective of this systematic review is to assess the current state of sensing technology on providing objective fall risk assessment in older adults. A systematic review was conducted in accordance to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis statement (PRISMA). Twenty-two studies out of 855 articles were systematically identified and included in this review. Pertinent methodological features (sensing technique, assessment activities, outcome variables, and fall discrimination/prediction models) were extracted from each article. Four major sensing technologies (inertial sensors, video/depth camera, pressure sensing platform and laser sensing) were reported to provide accurate fall risk diagnostic in older adults. Steady state walking, static/dynamic balance, and functional mobility were used as the assessment activity. A diverse range of diagnostic accuracy across studies (47.9% - 100%) were reported, due to variation in measured kinematic/kinetic parameters and modelling techniques. A wide range of sensor technologies have been utilized in fall risk assessment in older adults. Overall, these devices have the potential to provide an accurate, inexpensive, and easy-to-implement fall risk assessment. However, the variation in measured parameters, assessment tools, sensor sites, movement tasks, and modelling techniques, precludes a firm conclusion on their ability to predict future falls. Future work is needed to determine a clinical meaningful and easy to interpret fall risk diagnosis utilizing sensing technology. Additionally, the gap between functional evaluation and user experience to technology should be addressed.

Achievement report for fiscal 1976 on Sunshine Program. Technology assessment of hydrogen energy technologies III; 1976 nendo suiso energy gijutsu no technology assessment. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-03-31

This report contains the ultimate results of the 3-year research endeavor on 'Technology assessment of hydrogen energy technologies.' The scientists engaged in the project express their impressions at the conclusion of the research, stating: 'In the development of hydrogen energy technologies, what is the most important at the present stage is to define the formation of the energy more clearly - in what shape or at what place - so that various activities in this connection will be organized.' They say also: 'Although the type of research effort of looking into technological possibilities is quite important naturally, yet such should been carried out with a sense of purpose which is definite and concrete.' Before what are stated above may be complied with, of course, systems for development have to be arranged allowing the scientists to act in the above-suggested way. This report consists of a general discussion part and an itemized discussion part. The former summarizes the intention, aim, premise, contents, findings, opinions, etc., concerning the research work; and the latter carries a gist of the 'Hydrogen energy system concept (draft)' which constitutes the foundation on which the above-mentioned details are discussed in the former. (NEDO)

Integrated assessment of bioelectricity technology options

International Nuclear Information System (INIS)

Thornley, Patricia; Upham, Paul; Huang, Ye; Rezvani, Sina; Brammer, John; Rogers, John

2009-01-01

Power generation from biomass is a sustainable energy technology which can contribute to substantial reductions in greenhouse gas emissions, but with greater potential for environmental, economic and social impacts than most other renewable energy technologies. It is important therefore in assessing bioenergy systems to take account of not only technical, but also environmental, economic and social parameters on a common basis. This work addresses the challenge of analysing, quantifying and comparing these factors for bioenergy power generation systems. A life-cycle approach is used to analyse the technical, environmental, economic and social impacts of entire bioelectricity systems, with a number of life-cycle indicators as outputs to facilitate cross-comparison. The results show that similar greenhouse gas savings are achieved with the wide variety of technologies and scales studied, but land-use efficiency of greenhouse gas savings and specific airborne emissions varied substantially. Also, while specific investment costs and electricity costs vary substantially from one system to another the number of jobs created per unit of electricity delivered remains roughly constant. Recorded views of stakeholders illustrate that diverging priorities exist for different stakeholder groups and this will influence appropriate choice of bioenergy systems for different applications

Preliminary engineering assessment of the HCLL and HCPB Neutron Activation System

Energy Technology Data Exchange (ETDEWEB)

Calderoni, Pattrick; Leichtle, Dieter [Fusion for Energy, Barcelona, (Spain); Angelone, Maurizio [ENEA, Unita Tecnica Fusione, Frascati, (Italy); Klix, Axel [KIT, Eggenstein-Leopoldshafen, (Germany)

2015-07-01

The Neutron Activation System (NAS) is one of the four types of neutronics sensors considered for the testing of the HCLL and HCPB Test Blanket Module (TBM) in ITER. It measures the absolute neutron flux intensity with information on the neutron spectrum in selected positions of the TBM. The working principle of the NAS is as follows: the system moves small activation probes (capsules) into selected positions in the TBM (irradiation ends) by means of pneumatic transport with pressurized helium gas; the capsules are irradiated for a selected period, depending on their materials composition (several tens of seconds up to the full plasma pulse length); immediately after the irradiation they are extracted and transported to a gamma spectrometer by means of the same pneumatic transport system; the gamma spectrometer determines the induced gamma activity; the neutron flux and neutron fluence is calculated from the measured gamma activity and the known activation cross section of the materials in the activation probe; after the measurement the capsule is sent either to a disposal or storage (for later measurement). This paper summarizes the results of the feasibility assessment of the TBM NAS in the conceptual design phase, including design justification, identification of requirements based on the expected operating conditions in ITER and preliminary engineering assessment of the activation materials, irradiation ends integration in the modules design and the counting station. (authors)

Summary of 2017 NASA Workshop on Assessment of Advanced Battery Technologies for Aerospace Applications

Science.gov (United States)

Misra, Ajay

2018-01-01

A workshop on assessment of battery technologies for future aerospace applications was held in Cleveland, OH on August 16-17. The focus of the workshop, hosted by NASA GRC, was to assess (1) the battery needs for future aerospace missions, (2) the state of battery technology and projected technology advances, and (3) the need for additional investments for future aerospace missions. The workshop had 109 attendees that included internationally recognized technology leaders from academia and national laboratories, high level executives from government and industry, small businesses, and startup companies. A significant portion of the workshop was focused on batteries for electrified aircraft. The presentation will summarize the finding on the state of battery technologies for electrified aircraft and will include assessment of current state of battery technology, gaps in battery technology for application in electrified aircraft, and recommended technology development options for meeting near-term and long-term needs of electrified aircraft.

Bring Your Own Device Technology: Preliminary Results from a Mixed Methods Study to Explore Student Experience of In-Class Response Systems in Post-Secondary Education

Directory of Open Access Journals (Sweden)

Matthew Numer

2015-02-01

Full Text Available This research examines the effectiveness of Bring Your Own Device (BYOD technology in a postsecondary classroom. Despite recent advances in the technological tools available to educators, there is a significant gap in the literature regarding student efficacy, engagement and contribution to learning. This paper will present the preliminary findings of the first phases of an evaluation project measuring student interaction with BYOD technology in a large group setting. Employing a mixed methods design, the findings from two focus groups and two online surveys will be discussed. This project involved students in the Winter and Fall 2014 semesters of a fourth year Human Sexuality course which has enrolment of approximately 400 per semester. The findings suggest that BYOD technology contributes to student engagement and participation in the classroom setting. Further, the findings suggest that students are comfortable in using this tool, and perceived the experience as enjoyable.

Preliminary matrix model for quantifying and balancing the socio-economic impact of alternative cooling system technologies for nuclear power plants

International Nuclear Information System (INIS)

Cleary, D.P.; Salomon, S.N.; Pollnow, L.A.; Spangler, M.B.

1976-01-01

Assessment of environmental, including socio-economic, impacts of alternative technologies or courses of action is made difficult by the inability to adequately quantify the impacts. Matrix methods offer a set of techniques which allows the analyst to compare the relative impacts of alternative technologies or actions. Work is underway to develop and adapt these techniques to be used in assessing the environmental impacts of alternative cooling systems, and other alternative technological and siting options

Decentralised wastewater treatment effluent fertigation: preliminary ...

African Journals Online (AJOL)

Decentralised wastewater treatment effluent fertigation: preliminary technical assessment. ... living in informal settlements with the effluent produced being used on agricultural land. ... Banana and taro required 3 514 mm of irrigation effluent.

Risk analysis and technology assessment in support of technology development: Putting responsible innovation in practice in a case study for nanotechnology.

Science.gov (United States)

van Wezel, Annemarie P; van Lente, Harro; van de Sandt, Johannes Jm; Bouwmeester, Hans; Vandeberg, Rens Lj; Sips, Adrienne Jam

2018-01-01

Governments invest in "key enabling technologies," such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce uncertainties. Responsible research and innovation (RRI) is therefore a central theme in policy making. Risk analysis and technology assessment, together referred to as "RATA," can provide a basis to assess human, environmental, and societal risks of new technological developments during the various stages of technological development. This assessment can help both governmental authorities and innovative industry to move forward in a sustainable manner. Here we describe the developed procedures and products and our experiences to bring RATA in practice within a large Dutch nanotechnology consortium. This is an example of how to put responsible innovation in practice as an integrated part of a research program, how to increase awareness of RATA, and how to help technology developers perform and use RATA. Integr Environ Assess Manag 2018;14:9-16. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Preliminary Assessment of the Hanford Tank Waste Feed Acceptance and Product Qualification Programs

Energy Technology Data Exchange (ETDEWEB)

Herman, C. C.; Adamson, Duane J.; Herman, D. T.; Peeler, David K.; Poirier, Micheal R.; Reboul, S. H.; Stone, M. E.; Peterson, Reid A.; Chun, Jaehun; Fort, James A.; Vienna, John D.; Wells, Beric E.

2013-04-01

The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Savannah River National Laboratory (SRNL) and Pacific Northwest National Laboratory (PNNL) have been chartered to implement a science and technology program addressing Hanford Tank waste feed acceptance and product qualification. As a first step, the laboratories examined the technical risks and uncertainties associated with the planned waste feed acceptance and qualification testing for Hanford tank wastes. Science and technology gaps were identified for work associated with 1) feed criteria development with emphasis on identifying the feed properties and the process requirements, 2) the Tank Waste Treatment and Immobilization Plant (WTP) process qualification program, and 3) the WTP HLW glass product qualification program. Opportunities for streamlining the accetpance and qualification programs were also considered in the gap assessment. Technical approaches to address the science and technology gaps and/or implement the opportunities were identified. These approaches will be further refined and developed as strong integrated teams of researchers from national laboratories, contractors, industry, and academia are brought together to provide the best science and technology solutions. Pursuing the identified approaches will have immediate and long-term benefits to DOE in reducing risks and uncertainties associated with tank waste removal and preparation, transfers from the tank farm to the WTP, processing within the WTP Pretreatment Facility, and in producing qualified HLW glass products. Additionally, implementation of the identified opportunities provides the potential for long-term cost savings given the anticipated

Developing an Instrument for Assessing Students' Concepts of the Nature of Technology

Science.gov (United States)

Liou, Pey-Yan

2015-01-01

Background: The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students'…

Radiation detection technology assessment program (RADTAP)

International Nuclear Information System (INIS)

Smith, D.E.

1998-01-01

The U.S. Customs Service and the U.S. Department of Energy (DOE) conducted a technical and operational assessment of gamma ray radiation detection equipment during the period May 5-16, 1997 at a testing facility in North Carolina. The effort was entitled, ''Radiation Detection Technology Assessment Program (RADTAP)'', and was conducted for the purpose of assessing the applicability, sensitivity and robustness of a diverse suite of gamma ray detection and identification equipment for possible use by Customs and other law enforcement agencies. Thirteen companies entered 25 instruments into the assessment program. All detection equipment entered had to exhibit a minimum sensitivity of 20 micro-R per hour (background included) from a Cesium-137 point source. Isotope identifying spectrometers entered were man portable and operable at room temperature with read-out that could be interpreted by non-technical personnel. Radioactive sources used in the assessment included special nuclear material, industrial and health isotopes. Evaluators included Customs inspectors and technical experts from DOE and Customs. No conclusions or recommendations were issued based on the quantitative and qualitative test results, however, the results of the program provided law enforcement agencies with the necessary data to select equipment that best meets their operational needs and budgets. (author)

Assessment of material and technical resources of crop production technologies

Directory of Open Access Journals (Sweden)

V. M. Beylis

2017-01-01

Full Text Available The author explains the general principles of influence of the material and technical resources (MTR on performance and efficiency of the main technological operations in crop production. Various technologies from the point of view of MTR expenses were estimated. The general tendencies in development of crop production technologies were revealed. The distribution of costs of materials and equipment to perform a variety of agricultural activities was determined. Cost indicators should be a guide in the search of innovative technological processes and working elements of agricultural machins. The greatest values of expenses of work, fuel, metal, and also, money where found. The concepts allowing to provide costs production reduction were formulated. To achieve the maximum productivity with the minimum expenses, the perspective calculations shoul be based on «progressive» agrotechnologies. When determining progressive agrotechnology it is necessary on reasonable grounds to approach indicators of crop productivity in various agrozones and regions of the country. For an assessment of efficiency of MTR by crop production and ensuring decrease in resource intensity of agricultural products by search and use of essentially new technologies for energy saving when performing agricultural operations, an integrated percentage indicator of comparison of progressive technologies with the applied ones was developed. MTR at application of new progressive crop production technologies by integrated percentage index were estimated. This indicator can be used for definition of efficiency of MTR. Application of the offered technique will promote an effective assessment of MTR, decrease in resource intensity by search and developments of essentially new technologies of performance of operations in crop production.

A Self-Assessment Framework for Inclusive Schools Supporting Assistive Technology Users.

Science.gov (United States)

Hoogerwerf, Evert-Jan; Solander-Gross, Andrea; Mavrou, Katerina; Traina, Ivan; Hersh, Marion

2017-01-01

In order to support schools to assess their performance in supporting children with disabilities in their ICT and ICT-AT needs, a self-assessment framework was developed by a task force of partners and associate partners of the ENTELIS project. The self-assessment tool aims to help educational establishments that welcome learners with disabilities to assess their current outcomes and to plan improvements in supporting these students in increasing digital literacy and developing digital skills. This includes the use of mainstream Information and Communication Technology (ICT) and specially designed digital Assistive Technologies (ICT-AT). This can only successfully happen if schools fully embrace an inclusive approach to education. In this paper the authors describe the development of the framework and the further steps for its use.

Preliminary risk assessment database and risk ranking of pharmaceuticals in the environment

International Nuclear Information System (INIS)

Cooper, Emily R.; Siewicki, Thomas C.; Phillips, Karl

2008-01-01

There is increasing concern about pharmaceuticals entering surface waters and the impacts these compounds may have on aquatic organisms. Many contaminants, including pharmaceuticals, are not completely removed by wastewater treatment. Discharge of effluent into surface waters results in chronic low-concentration exposure of aquatic organisms to these compounds, with unknown impacts. Exposure of virulent bacteria in wastewater to antibiotic residues may also induce resistance, which could threaten human health. The purpose of this study was to provide information on pharmaceutical threats to the environment. A preliminary risk assessment database for common pharmaceuticals was created and put into a web-accessible database named 'Pharmaceuticals in the Environment, Information for Assessing Risk' (PEIAR) to help others evaluate potential risks of pharmaceutical contaminants in the environment. Information from PEIAR was used to prioritize compounds that may threaten the environment, with a focus on marine and estuarine environments. The pharmaceuticals were ranked using five different combinations of physical-chemical and toxicological data, which emphasized different risks. The results of the ranking methods differed in the compounds identified as high risk; however, drugs from the central nervous system, cardiovascular, and anti-infective classes were heavily represented within the top 100 drugs in all rankings. Anti-infectives may pose the greatest overall risk based upon our results using a combination of factors that measure environmental transport, fate, and aquatic toxicity. The dataset is also useful for highlighting information that is still needed to assuredly assess risk

King County Metro Battery Electric Bus Demonstration: Preliminary Project Results

Energy Technology Data Exchange (ETDEWEB)

2017-05-22

The U.S. Federal Transit Administration (FTA) funds a variety of research projects that support the commercialization of zero-emission bus technology. To evaluate projects funded through these programs, FTA has enlisted the help of the National Renewable Energy Laboratory (NREL) to conduct third-party evaluations of the technologies deployed under the FTA programs. NREL works with the selected agencies to evaluate the performance of the zero-emission buses compared to baseline conventional buses in similar service. The evaluation effort will advance the knowledge base of zero-emission technologies in transit bus applications and provide 'lessons learned' to aid other fleets in incrementally introducing next generation zero-emission buses into their operations. This report provides preliminary performance evaluation results from a demonstration of three zero-emission battery electric buses at King County Metro in King County, Washington. NREL developed this preliminary results report to quickly disseminate evaluation results to stakeholders. Detailed evaluation results will be published in future reports.

Mapping of health technology assessment in selected countries

NARCIS (Netherlands)

Oortwijn, W.; Broos, P.; Vondeling, Hindrik; Banta, D.; Todorova, L.

2013-01-01

Objectives: The aim of this study was to develop and apply an instrument to map the level of health technology assessment (HTA) development at country level in selected countries. We examined middle-income countries (Argentina, Brazil, India, Indonesia, Malaysia, Mexico, and Russia) and countries

Preliminary parameter assessments of a spiral FFAG accelerator for proton therapy

International Nuclear Information System (INIS)

Smirnov, V.L.; Azaryan, N.S.; Vorozhtsov, S.B.

2013-01-01

Fixed-Field Alternating-Gradient (FFAG) accelerator was invented in the 1950-60s but never progressed beyond the model stage. Starting from 2000, new interest in this type of accelerator arose. Given advantages of the FFAG over the synchrotron, cyclotron and linac, there are many possible applications of the accelerator. Among them, we are mostly interested in acceleration of protons and light ions for hadron therapy. In this connection a preliminary set of parameters of the facility was estimated and, in particular, the magnetic sector shape and corresponding dynamical properties of the magnetic field of the accelerator were calculated. In addition, preliminary considerations about the RF system design are given.

Energy and the environment: Technology assessment and policy options

International Nuclear Information System (INIS)

Silveira, M.P.W.

1990-01-01

While the energy crisis of the 1970s stimulated technological innovation in developed countries, it often had the opposite effect in the third world. However, developing countries can be considered to have two types of energy systems: ''connected'' and ''disconnected''. The connected system is affected by changes in the price of commercial energy, but the disconnected system is usually rural and remote. Commercial forms of energy may be needed in the disconnected system, but they are largely unavailable. In some of the developing countries, new energy technologies have therefore been developed which adapt traditional technologies still existing in the disconnected sector. In this article some of the work of the United National Centre for Science and Technology for Development is described. Through its ATAS (Advance Technology Alert System) programme, international and regional workshops are held to discuss policy questions arising in regard to new technologies and developments. Workshops have been held in Moscow on new energy technologies in the industry subsystem (connected), in Guatemala City on new energy technologies and the disconnected system, and in Ottawa on new energy technologies, transportation and development. Initial assessments made by or through these workshops are outlined here. A fourth workshop will be held in June 1990 in Saarbrucken on energy technologies and climate change. (author). 3 figs

Electronic Engineering Technology Program Exit Examination as an ABET and Self-Assessment Tool

Science.gov (United States)

Thomas, Gary; Darayan, Shahryar

2018-01-01

Every engineering, computing, and engineering technology program accredited by the Accreditation Board for Engineering and Technology (ABET) has formulated many and varied self-assessment methods. Methods used to assess a program for ABET accreditation and continuous improvement are for keeping programs current with academic and industrial…

Integrated technology rotor/flight research rotor hub concept definition

Science.gov (United States)

Dixon, P. G. C.

1983-01-01

Two variations of the helicopter bearingless main rotor hub concept are proposed as bases for further development in the preliminary design phase of the Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) program. This selection was the result of an evaluation of three bearingless hub concepts and two articulated hub concepts with elastomeric bearings. The characteristics of each concept were evaluated by means of simplified methodology. These characteristics included the assessment of stability, vulnerability, weight, drag, cost, stiffness, fatigue life, maintainability, and reliability.

Tunable solid-state laser technology for applications to scientific and technological experiments from space

Science.gov (United States)

Allario, F.; Taylor, L. V.

1986-01-01

Current plans for the Earth Observing System (EOS) include development of a lidar facility to conduct scientific experiments from a polar orbiting platforms. A recommended set of experiments were scoped, which includes techniques of atmospheric backscatter (Lidar), Differential Absorption Lidar (DIAL), altimetry, and retroranging. Preliminary assessments of the resources (power, weight, volume) required by the Eos Lidar Facility were conducted. A research program in tunable solid state laser technology was developed, which includes laser materials development, modeling and experiments on the physics of solid state laser materials, and development of solid state laser transmitters with a strong focus on Eos scientific investigations. Some of the system studies that were conducted which highlight the payoff of solid state laser technology for the Eos scientific investigations will be discussed. Additionally, a summary of some promising research results which have recently emerged from the research program will be presented.

Sustainability Assessment of Electricity Generation Technologies in Egypt Using Multi-Criteria Decision Analysis

Directory of Open Access Journals (Sweden)

Mostafa Shaaban

2018-05-01

Full Text Available Future electricity planning necessitates a thorough multi-faceted analysis of the available technologies in order to secure the energy supply for coming generations. To cope with worldwide concerns over sustainable development and meet the growing demands of electricity we assess the future potential technologies in Egypt through covering their technical, economic, environmental and social aspects. In this study we fill the gap of a lacking sustainability assessment of energy systems in Egypt where most of the studies focus mainly on the economic and technical aspects of planning future installation of power plants in Egypt. Furthermore, we include the stakeholder preferences of the indicators in the energy sector into our assessment. Moreover, we perform a sensitivity analysis through single dimension assessment scenarios of the technologies as well as a sustainable scenario with equal preferences of all dimensions of the sustainability. We employ two multi-criteria decision analysis (MCDA methodologies: the analytical hierarchy process for weighing the assessment criteria, and the weighted sum method for generating a general integrated sustainability index for each technology. The study investigates seven technologies: coal, natural gas, wind, concentrated solar power, photovoltaics, biomass and nuclear. The results reveal a perfect matching between the ranking of the technologies by the stakeholders and the sustainable scenario showing the highest ranking for natural gas and the lowest for nuclear and coal. There is a strong potential for renewable energy technologies to invade the electricity market in Egypt where they achieve the second ranking after natural gas. The Monte-Carlo approach gives photovoltaics a higher ranking over concentrated solar power as compared to the sample data ranking. The study concludes the importance of a multi-dimensional evaluation of the technologies while considering the preferences of the stakeholders in

HVDC power transmission technology assessment

Energy Technology Data Exchange (ETDEWEB)

Hauth, R.L.; Tatro, P.J.; Railing, B.D. [New England Power Service Co., Westborough, MA (United States); Johnson, B.K.; Stewart, J.R. [Power Technologies, Inc., Schenectady, NY (United States); Fink, J.L.

1997-04-01

The purpose of this study was to develop an assessment of the national utility system`s needs for electric transmission during the period 1995-2020 that could be met by future reduced-cost HVDC systems. The assessment was to include an economic evaluation of HVDC as a means for meeting those needs as well as a comparison with competing technologies such as ac transmission with and without Flexible AC Transmission System (FACTS) controllers. The role of force commutated dc converters was to be assumed where appropriate. The assessment begins by identifying the general needs for transmission in the U.S. in the context of a future deregulated power industry. The possible roles for direct current transmission are then postulated in terms of representative scenarios. A few of the scenarios are illustrated with the help of actual U.S. system examples. non-traditional applications as well as traditional applications such as long lines and asynchronous interconnections are discussed. The classical ``break-even distance`` concept for comparing HVDC and ac lines is used to assess the selected scenarios. The impact of reduced-cost converters is reflected in terms of the break-even distance. This report presents a comprehensive review of the functional benefits of HVDC transmission and updated cost data for both ac and dc system components. It also provides some provocative thoughts on how direct current transmission might be applied to better utilize and expand our nation`s increasingly stressed transmission assets.

Preliminary systems design study assessment report

International Nuclear Information System (INIS)

Mayberry, J.L.; Feizollahi, F.; Del Signore, J.C.

1992-01-01

The System Design Study (SDS), part of the Waste Technology Development Department at the Idaho National Engineering Laboratory (INEL), examined techniques available for the remediation of hazardous and transuranic waste stored at the Radioactive Waste Management Complex's Subsurface Disposal Area at the INEL. Using specific technologies, system concepts for treating the buried waste and the surrounding contaminated soil were evaluated. Evaluation included implementability, effectiveness, and cost. The SDS resulted in the development of technology requirements including demonstration, testing, and evaluation activities needed for implementing each. This volume contains the descriptions and other relevant information of the four subsystems required for most of the ex situ processing systems. This volume covers the metal decontamination and sizing subsystem, soils processing subsystem, low-level waste subsystem, and retrieval subsystem

A preliminary assessment of noise level during Deepawali festival in Balasore, India.

Science.gov (United States)

Goswami, Shreerup; Swain, Bijay Kumar; Mohapatra, Hara Prasad; Bal, Kshirod Kumar

2013-11-01

A preliminary assessment of noise levels during Deepawali, was made in the present study. In order to assess the situation of noise levels in and around Balasore during two consecutive Deepawali of the year 2010 and 2011; noise monitoring was carried out in three different specified times (4:30-7:00 p.m., 7:00-10:30 p.m., 10:30 p.m.-1:00 a.m.). Noise descriptors such as L10, L50, L90, Leq, noise pollution level and noise climate were assessed to reveal the extent of noise pollution in this festival of crackers. Permissible limit of noise levels (Leq) prescribed by WHO during the festival was 100 dB and Lmax must not exceed 110 dB during such occasion. However, in all the cases Lmax and NPL values exceeded 110 dB, while Leq values ranged from 92.9 to 101.9 dB during 2010 Deepawali and 81.5 to 100.8 dB during 2011 Deepawali. On the other hand, all the noise monitoring sites belonged to residential areas. The assessed noise levels during such festivity are much more than 55/45 dB i.e. prescribed for residential areas for day/night time by CPCB. However, it was observed that the noise of Deepawali (Leq) decreased considerably and was less during 2011 than 2010. These may be due to increased environmental awareness among the public. Subsequently, the people of Balasore prefered to celebrate Deepawali, the festival of lights without sound and smoke. Noise policy should also be worked out for a better understanding of such local, social and cultural festivals in which annoyance arise.

Research utilization in the building industry: decision model and preliminary assessment

Energy Technology Data Exchange (ETDEWEB)

Watts, R.L.; Johnson, D.R.; Smith, S.A.; Westergard, E.J.

1985-10-01

The Research Utilization Program was conceived as a far-reaching means for managing the interactions of the private sector and the federal research sector as they deal with energy conservation in buildings. The program emphasizes a private-public partnership in planning a research agenda and in applying the results of ongoing and completed research. The results of this task support the hypothesis that the transfer of R and D results to the buildings industry can be accomplished more efficiently and quickly by a systematic approach to technology transfer. This systematic approach involves targeting decision makers, assessing research and information needs, properly formating information, and then transmitting the information through trusted channels. The purpose of this report is to introduce elements of a market-oriented knowledge base, which would be useful to the Building Systems Division, the Office of Buildings and Community Systems and their associated laboratories in managing a private-public research partnership on a rational systematic basis. This report presents conceptual models and data bases that can be used in formulating a technology transfer strategy and in planning technology transfer programs.

Priority survey between indicators and analytic hierarchy process analysis for green chemistry technology assessment.

Science.gov (United States)

Kim, Sungjune; Hong, Seokpyo; Ahn, Kilsoo; Gong, Sungyong

2015-01-01

This study presents the indicators and proxy variables for the quantitative assessment of green chemistry technologies and evaluates the relative importance of each assessment element by consulting experts from the fields of ecology, chemistry, safety, and public health. The results collected were subjected to an analytic hierarchy process to obtain the weights of the indicators and the proxy variables. These weights may prove useful in avoiding having to resort to qualitative means in absence of weights between indicators when integrating the results of quantitative assessment by indicator. This study points to the limitations of current quantitative assessment techniques for green chemistry technologies and seeks to present the future direction for quantitative assessment of green chemistry technologies.

A DECADE OF HEALTH TECHNOLOGY ASSESSMENT IN POLAND

NARCIS (Netherlands)

Lipska, Iga; McAuslane, James Neil; Leufkens, Bert; Hövels, Anke

OBJECTIVES: The objective of this study is to illustrate and provide a better understanding of the role of health technology assessment (HTA) processes in decision making for drug reimbursement in Poland and how this approach could be considered by other countries of limited resources. METHODS: We

Progress in preliminary studies at Ottana Solar Facility

Science.gov (United States)

Demontis, V.; Camerada, M.; Cau, G.; Cocco, D.; Damiano, A.; Melis, T.; Musio, M.

2016-05-01

The fast increasing share of distributed generation from non-programmable renewable energy sources, such as the strong penetration of photovoltaic technology in the distribution networks, has generated several problems for the management and security of the whole power grid. In order to meet the challenge of a significant share of solar energy in the electricity mix, several actions aimed at increasing the grid flexibility and its hosting capacity, as well as at improving the generation programmability, need to be investigated. This paper focuses on the ongoing preliminary studies at the Ottana Solar Facility, a new experimental power plant located in Sardinia (Italy) currently under construction, which will offer the possibility to progress in the study of solar plants integration in the power grid. The facility integrates a concentrating solar power (CSP) plant, including a thermal energy storage system and an organic Rankine cycle (ORC) unit, with a concentrating photovoltaic (CPV) plant and an electrical energy storage system. The facility has the main goal to assess in real operating conditions the small scale concentrating solar power technology and to study the integration of the two technologies and the storage systems to produce programmable and controllable power profiles. A model for the CSP plant yield was developed to assess different operational strategies that significantly influence the plant yearly yield and its global economic effectiveness. In particular, precise assumptions for the ORC module start-up operation behavior, based on discussions with the manufacturers and technical datasheets, will be described. Finally, the results of the analysis of the: "solar driven", "weather forecasts" and "combined storage state of charge (SOC)/ weather forecasts" operational strategies will be presented.

Wearable technology for spine movement assessment: A systematic review.

Science.gov (United States)

Papi, Enrica; Koh, Woon Senn; McGregor, Alison H

2017-11-07

Continuous monitoring of spine movement function could enhance our understanding of low back pain development. Wearable technologies have gained popularity as promising alternative to laboratory systems in allowing ambulatory movement analysis. This paper aims to review the state of art of current use of wearable technology to assess spine kinematics and kinetics. Four electronic databases and reference lists of relevant articles were searched to find studies employing wearable technologies to assess the spine in adults performing dynamic movements. Two reviewers independently identified relevant papers. Customised data extraction and quality appraisal form were developed to extrapolate key details and identify risk of biases of each study. Twenty-two articles were retrieved that met the inclusion criteria: 12 were deemed of medium quality (score 33.4-66.7%), and 10 of high quality (score >66.8%). The majority of articles (19/22) reported validation type studies. Only 6 reported data collection in real-life environments. Multiple sensors type were used: electrogoniometers (3/22), strain gauges based sensors (3/22), textile piezoresistive sensor (1/22) and accelerometers often used with gyroscopes and magnetometers (15/22). Two sensors units were mainly used and placing was commonly reported on the spine lumbar and sacral regions. The sensors were often wired to data transmitter/logger resulting in cumbersome systems. Outcomes were mostly reported relative to the lumbar segment and in the sagittal plane, including angles, range of motion, angular velocity, joint moments and forces. This review demonstrates the applicability of wearable technology to assess the spine, although this technique is still at an early stage of development. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Lessons learned from the preliminary performance assessment exercise for the Vienne site strategies for investigating the granodiorite confinement capability

International Nuclear Information System (INIS)

Lebon, P.

1999-01-01

One of the three sites under study by ANDRA is located on the Poitou shoal in the Vienne Department. The granitic basement rock is overlain by a 160 m thick layer of Jurassic sediments containing two seasonally pumped aquifers. The preliminary hydrogeological model of the granitic basement assumed that regional flow is SE-NW, and circulates in the hecto-metric fractures, and that groundwater flow velocity is very low. A preliminary performance assessment exercise focusing on the geological barrier was carried out based on these assumptions and a disposal concept where radwaste is stored in separate granodiorite 'blocks' delimited by the water-bearing fractures. As regards of the granodioritic blocks, the programme goals include analysing of detailed structure, obtaining uncontaminated samples of interstitial ground water in order to determine its physicochemical properties and evaluating transport and retention parameters. (author)

Demonstration of Airborne Wide Area Assessment Technologies at the Toussaint River, Ohio

National Research Council Canada - National Science Library

Foley, Jack; Wright, David

2007-01-01

...) technology, a wide area assessment technology, to assist in the characterization of the shore and shallow areas in and around the Toussaint River relative to munitions contamination from historical...

The potential impact of computer-aided assessment technology in ...

African Journals Online (AJOL)

The potential impact of computer-aided assessment technology in higher education. ... Further more 'Increased number of students in Higher Education and the ... benefits, limitations, impacts on student learning and strategies for developing ...

Preliminary screening of alternative technologies to incineration for treatment of chemical-agent-contaminated soil, Rocky Mountain Arsenal

Energy Technology Data Exchange (ETDEWEB)

Shem, L.M.; Rosenblatt, D.H.; Smits, M.P.; Wilkey, P.L.; Ballou, S.W.

1995-12-01

In support of the U.S. Army`s efforts to determine the best technologies for remediation of soils, water, and structures contaminated with pesticides and chemical agents, Argonne National Laboratory has reviewed technologies for treating soils contaminated with mustard, lewisite, sarin, o-ethyl s-(2- (diisopropylamino)ethyl)methyl-phosphonothioate (VX), and their breakdown products. This report focuses on assessing alternatives to incineration for dealing with these contaminants. For each technology, a brief description is provided, its suitability and constraints on its use are identified, and its overall applicability for treating the agents of concern is summarized. Technologies that merit further investigation are identified.