WorldWideScience

Sample records for preliminary source attribution

  1. Source attribution of tropospheric ozone

    Science.gov (United States)

    Butler, T. M.

    2015-12-01

    Tropospheric ozone is a harmful pollutant with adverse effects on human health and ecosystems. As well as these effects, tropospheric ozone is also a powerful greenhouse gas, with an anthropogenic radiative forcing one quarter of that of CO2. Along with methane and atmospheric aerosol, tropospheric ozone belongs to the so-called Short Lived Climate forcing Pollutants, or SLCP. Recent work has shown that efforts to reduce concentrations of SLCP in the atmosphere have the potential to slow the rate of near-term climate change, while simultaneously improving public health and reducing crop losses. Unlike many other SLCP, tropospehric ozone is not directly emitted, but is instead influenced by two distinct sources: transport of air from the ozone-rich stratosphere; and photochemical production in the troposphere from the emitted precursors NOx (oxides of nitrogen), CO (Carbon Monoxide), and VOC (volatile organic compounds, including methane). Better understanding of the relationship between ozone production and the emissions of its precursors is essential for the development of targeted emission reduction strategies. Several modeling methods have been employed to relate the production of tropospheric ozone to emissions of its precursors; emissions perturbation, tagging, and adjoint sensitivity methods all deliver complementary information about modelled ozone production. Most studies using tagging methods have focused on attribution of tropospheric ozone production to emissions of NOx, even though perturbation methods have suggested that tropospheric ozone is also sensitive to VOC, particularly methane. In this study we describe the implementation into a global chemistry-climate model of a scheme for tagging emissions of NOx and VOC with an arbitrary number of labels, which are followed through the chemical reactions of tropospheric ozone production in order to perform attribution of tropospehric ozone to its emitted precursors. Attribution is performed to both

  2. Source attribution of human campylobacteriosis in Denmark.

    Science.gov (United States)

    Boysen, L; Rosenquist, H; Larsson, J T; Nielsen, E M; Sørensen, G; Nordentoft, S; Hald, T

    2014-08-01

    SUMMARY This study assesses the contribution of different sources of human campylobacteriosis in Denmark using two different source-attribution approaches. In total, 794 non-human isolates and 406 isolates from human cases (domestic, travel related, and cases with unknown travel history) were collected. Isolates were characterized by multilocus sequence typing, flaA typing and susceptibility to antibiotics. Both models used indicate that the major burden of human campylobacteriosis in Denmark originates from the domestic broiler chicken reservoir. The second most important reservoir was found to be cattle. The Asymmetric Island model attributed 52% [95% credibility interval (CrI) 37-67] to Danish chicken, 17% (95% CrI 3-33) to imported chicken, and 17% (95% CrI 7-28) to cattle. Similarly, the Campylobacter source-attribution model apportioned 38% (95% CrI 28-47) to Danish chicken, 14% (95% CrI 10-18) to imported chicken, and 16% (95% CrI 7-25) to cattle. The addition of flaA type as an extra discriminatory typing parameter did not change the attribution of cases markedly.

  3. A Statistical Framework for Microbial Source Attribution

    Energy Technology Data Exchange (ETDEWEB)

    Velsko, S P; Allen, J E; Cunningham, C T

    2009-04-28

    This report presents a general approach to inferring transmission and source relationships among microbial isolates from their genetic sequences. The outbreak transmission graph (also called the transmission tree or transmission network) is the fundamental structure which determines the statistical distributions relevant to source attribution. The nodes of this graph are infected individuals or aggregated sub-populations of individuals in which transmitted bacteria or viruses undergo clonal expansion, leading to a genetically heterogeneous population. Each edge of the graph represents a transmission event in which one or a small number of bacteria or virions infects another node thus increasing the size of the transmission network. Recombination and re-assortment events originate in nodes which are common to two distinct networks. In order to calculate the probability that one node was infected by another, given the observed genetic sequences of microbial isolates sampled from them, we require two fundamental probability distributions. The first is the probability of obtaining the observed mutational differences between two isolates given that they are separated by M steps in a transmission network. The second is the probability that two nodes sampled randomly from an outbreak transmission network are separated by M transmission events. We show how these distributions can be obtained from the genetic sequences of isolates obtained by sampling from past outbreaks combined with data from contact tracing studies. Realistic examples are drawn from the SARS outbreak of 2003, the FMDV outbreak in Great Britain in 2001, and HIV transmission cases. The likelihood estimators derived in this report, and the underlying probability distribution functions required to calculate them possess certain compelling general properties in the context of microbial forensics. These include the ability to quantify the significance of a sequence 'match' or &apos

  4. New paradigms for Salmonella source attribution based on microbial subtyping.

    NARCIS (Netherlands)

    Mughini-Gras, Lapo; Franz, Eelco; van Pelt, Wilfrid

    Microbial subtyping is the most common approach for Salmonella source attribution. Typically, attributions are computed using frequency-matching models like the Dutch and Danish models based on phenotyping data (serotyping, phage-typing, and antimicrobial resistance profiling). Herewith, we

  5. Balanced Sourcing As An Important Attribute Of Operations Strategy ...

    African Journals Online (AJOL)

    Balanced Sourcing As An Important Attribute Of Operations Strategy: Reality Or ... the questions “who should perform an activity or process in the value chain? ... Operations Strategy, Strategic Sourcing, Sustainable Competitive Advantage, ...

  6. New paradigms for Salmonella source attribution based on microbial subtyping.

    Science.gov (United States)

    Mughini-Gras, Lapo; Franz, Eelco; van Pelt, Wilfrid

    2018-05-01

    Microbial subtyping is the most common approach for Salmonella source attribution. Typically, attributions are computed using frequency-matching models like the Dutch and Danish models based on phenotyping data (serotyping, phage-typing, and antimicrobial resistance profiling). Herewith, we critically review three major paradigms facing Salmonella source attribution today: (i) the use of genotyping data, particularly Multi-Locus Variable Number of Tandem Repeats Analysis (MLVA), which is replacing traditional Salmonella phenotyping beyond serotyping; (ii) the integration of case-control data into source attribution to improve risk factor identification/characterization; (iii) the investigation of non-food sources, as attributions tend to focus on foods of animal origin only. Population genetics models or simplified MLVA schemes may provide feasible options for source attribution, although there is a strong need to explore novel modelling options as we move towards whole-genome sequencing as the standard. Classical case-control studies are enhanced by incorporating source attribution results, as individuals acquiring salmonellosis from different sources have different associated risk factors. Thus, the more such analyses are performed the better Salmonella epidemiology will be understood. Reparametrizing current models allows for inclusion of sources like reptiles, the study of which improves our understanding of Salmonella epidemiology beyond food to tackle the pathogen in a more holistic way. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Salmonella source attribution based on microbial subtyping

    DEFF Research Database (Denmark)

    Barco, Lisa; Barrucci, Federica; Olsen, John Elmerdahl

    2013-01-01

    Source attribution of cases of food-borne disease represents a valuable tool for identifying and prioritizing effective food-safety interventions. Microbial subtyping is one of the most common methods to infer potential sources of human food-borne infections. So far, Salmonella microbial subtyping...... source attribution through microbial subtyping approach. It summarizes the available microbial subtyping attribution models and discusses the use of conventional phenotypic typing methods, as well as of the most commonly applied molecular typing methods in the European Union (EU) laboratories...

  8. Salmonella Source Attribution in Japan by a Microbiological Subtyping Approach

    DEFF Research Database (Denmark)

    Toyofuku, Hajime; Pires, Sara Monteiro; Hald, Tine

    2011-01-01

    In order to estimate the number of human Salmonella infections attributable to each of major animal-food source, and help identifying the best Salmonella intervention strategies, a microbial subtyping approach for source attribution was applied. We adapted a Bayesian model that attributes illnesses......-food sources, subtype-related factors, and source-related factors. National-surveillance serotyping data from 1998 to 2007 were applied to the model. Results suggested that the relative contribution of the sources to salmonellosis varied during the 10 year period, and that eggs are the most important source...... to specific sources and allows for the estimation of the differences in the ability of Salmonella subtypes and food types to result in reported salmonellosis. The number of human cases caused by different Salmonella subtypes is estimated as a function of the prevalence of these subtypes in the animal...

  9. An evolution of image source camera attribution approaches.

    Science.gov (United States)

    Jahanirad, Mehdi; Wahab, Ainuddin Wahid Abdul; Anuar, Nor Badrul

    2016-05-01

    Camera attribution plays an important role in digital image forensics by providing the evidence and distinguishing characteristics of the origin of the digital image. It allows the forensic analyser to find the possible source camera which captured the image under investigation. However, in real-world applications, these approaches have faced many challenges due to the large set of multimedia data publicly available through photo sharing and social network sites, captured with uncontrolled conditions and undergone variety of hardware and software post-processing operations. Moreover, the legal system only accepts the forensic analysis of the digital image evidence if the applied camera attribution techniques are unbiased, reliable, nondestructive and widely accepted by the experts in the field. The aim of this paper is to investigate the evolutionary trend of image source camera attribution approaches from fundamental to practice, in particular, with the application of image processing and data mining techniques. Extracting implicit knowledge from images using intrinsic image artifacts for source camera attribution requires a structured image mining process. In this paper, we attempt to provide an introductory tutorial on the image processing pipeline, to determine the general classification of the features corresponding to different components for source camera attribution. The article also reviews techniques of the source camera attribution more comprehensively in the domain of the image forensics in conjunction with the presentation of classifying ongoing developments within the specified area. The classification of the existing source camera attribution approaches is presented based on the specific parameters, such as colour image processing pipeline, hardware- and software-related artifacts and the methods to extract such artifacts. The more recent source camera attribution approaches, which have not yet gained sufficient attention among image forensics

  10. Complex Event Detection via Multi Source Video Attributes (Open Access)

    Science.gov (United States)

    2013-10-03

    Complex Event Detection via Multi-Source Video Attributes Zhigang Ma† Yi Yang‡ Zhongwen Xu‡§ Shuicheng Yan Nicu Sebe† Alexander G. Hauptmann...under its International Research Centre @ Singapore Fund- ing Initiative and administered by the IDM Programme Of- fice, and the Intelligence Advanced

  11. Bayesian Source Attribution of Salmonellosis in South Australia.

    Science.gov (United States)

    Glass, K; Fearnley, E; Hocking, H; Raupach, J; Veitch, M; Ford, L; Kirk, M D

    2016-03-01

    Salmonellosis is a significant cause of foodborne gastroenteritis in Australia, and rates of illness have increased over recent years. We adopt a Bayesian source attribution model to estimate the contribution of different animal reservoirs to illness due to Salmonella spp. in South Australia between 2000 and 2010, together with 95% credible intervals (CrI). We excluded known travel associated cases and those of rare subtypes (fewer than 20 human cases or fewer than 10 isolates from included sources over the 11-year period), and the remaining 76% of cases were classified as sporadic or outbreak associated. Source-related parameters were included to allow for different handling and consumption practices. We attributed 35% (95% CrI: 20-49) of sporadic cases to chicken meat and 37% (95% CrI: 23-53) of sporadic cases to eggs. Of outbreak-related cases, 33% (95% CrI: 20-62) were attributed to chicken meat and 59% (95% CrI: 29-75) to eggs. A comparison of alternative model assumptions indicated that biases due to possible clustering of samples from sources had relatively minor effects on these estimates. Analysis of source-related parameters showed higher risk of illness from contaminated eggs than from contaminated chicken meat, suggesting that consumption and handling practices potentially play a bigger role in illness due to eggs, considering low Salmonella prevalence on eggs. Our results strengthen the evidence that eggs and chicken meat are important vehicles for salmonellosis in South Australia. © 2015 Society for Risk Analysis.

  12. Sulfate Aerosol in the Arctic: Source Attribution and Radiative Forcing

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yang [Atmospheric Science and Global Change Division, Pacific Northwest National Laboratory, Richland WA USA; Wang, Hailong [Atmospheric Science and Global Change Division, Pacific Northwest National Laboratory, Richland WA USA; Smith, Steven J. [Joint Global Change Research Institute, Pacific Northwest National Laboratory, College Park MD USA; Easter, Richard C. [Atmospheric Science and Global Change Division, Pacific Northwest National Laboratory, Richland WA USA; Rasch, Philip J. [Atmospheric Science and Global Change Division, Pacific Northwest National Laboratory, Richland WA USA

    2018-02-08

    Source attributions of Arctic sulfate and its direct radiative effect for 2010–2014 are quantified in this study using the Community Earth System Model (CESM) equipped with an explicit sulfur source-tagging technique. Regions that have high emissions and/or are near/within the Arctic present relatively large contributions to Arctic sulfate burden, with the largest contribution from sources in East Asia (27%). East Asia and South Asia together have the largest contributions to Arctic sulfate concentrations at 9–12 km, whereas sources within or near the Arctic account largely below 2 km. For remote sources with strong emissions, their contributions to Arctic sulfate burden are primarily driven by meteorology, while contributions of sources within or near the Arctic are dominated by their emission strength. The sulfate direct radiative effect (DRE) is –0.080 W m-2 at the Arctic surface, offsetting the net warming effect from the combination of in-snow heating and DRE cooling from black carbon. East Asia, Arctic local and Russia/Belarus/Ukraine sources contribute –0.017, –0.016 and –0.014 W m-2, respectively, to Arctic sulfate DRE. A 20% reduction in anthropogenic SO2 emissions leads to a net increase of +0.013 W m-2 forcing at the Arctic surface. These results indicate that a joint reduction in BC emissions could prevent possible Arctic warming from future reductions in SO2 emissions. Sulfate DRE efficiency calculations suggest that short transport pathways together with meteorology favoring long sulfate lifetimes make certain sources more efficient in influencing the Arctic sulfate DRE.

  13. Global source attribution of sulfate aerosol and its radiative forcing

    Science.gov (United States)

    Yang, Y.; Wang, H.; Smith, S.; Easter, R. C.; Ma, P. L.; Qian, Y.; Li, C.; Yu, H.; Rasch, P. J.

    2017-12-01

    Sulfate is an important aerosol that poses health risks and influences climate. Due to long-range atmospheric transport, local sulfate pollution could result from intercontinental influences, making domestic efforts of improving air quality inefficient. Accurate understanding of source attribution of sulfate and its radiative forcing is important for both regional air quality improvement and global climate mitigation. In this study, for the first time, a sulfur source-tagging capability is implemented in the Community Atmosphere Model (CAM5) to quantify the global source-receptor relationships of sulfate and its direct and indirect radiative forcing (DRF and IRF). Near-surface sulfate concentrations are mostly contributed by local emissions in regions with high emissions, while over regions with relatively low SO2 emissions, the near-surface sulfate is primarily attributed to non-local sources from long-range transport. The export of SO2 and sulfate from Europe contributes 20% of sulfate concentrations over North Africa, Russia and Central Asia. Sources from the Middle East account for 20% of sulfate over North Africa, Southern Africa and Central Asia in winter and autumn, and 20% over South Asia in spring. East Asia accounts for about 50% of sulfate over Southeast Asia in winter and autumn, 15% over Russia in summer, and 10% over North America in spring. South Asia contributes to 25% of sulfate over Southeast Asia in spring. Lifetime of aerosols, together with regional export, is found to determine regional air quality. The simulated global total sulfate DRF is -0.42 W m-2, with 75% contributed by anthropogenic sulfate and 25% contributed by natural sulfate. In the Southern Hemisphere tropics, dimethyl sulfide (DMS) contributes the most to the total DRF. East Asia has the largest contribution of 20-30% over the Northern Hemisphere mid- and high-latitudes. A 20% perturbation of sulfate and its precursor emissions gives a sulfate IRF of -0.44 W m-2. DMS has the

  14. Source attribution and mitigation strategies for air pollution in Delhi

    Science.gov (United States)

    Kiesewetter, Gregor; Purohit, Pallav; Schoepp, Wolfgang; Liu, Jun; Amann, Markus; Bhanarkar, Anil

    2017-04-01

    Indian cities, and the megacity of Delhi in particular, have suffered from high air pollution for years. Recent observations show that ambient concentrations of fine particulate matter (PM2.5) in Delhi strongly exceed the Indian national ambient air quality standards as well as the World Health Organization's interim target levels. At the same time, India is experiencing strong urbanization, and both Delhi's emissions as well as the exposed population are growing. Therefore the question arises how PM2.5 concentrations will evolve in the future, and how they can be improved efficiently. In the past, typical responses of the Delhi government to high pollution episodes have been restrictions on motorized road traffic, on power plant operations and on construction activities. However, to design sustainable and efficient pollution mitigation measures, the contribution of different source sectors and spatial scales needs to be quantified. Here we combine the established emission calculation scheme of the Greenhouse Gas - Air Pollution Interactions and Synergies (GAINS) model with regional chemistry-transport model simulations (0.5° resolution) as well as local particle dispersion (2 × 2 km resolution) to arrive at a source attribution of ambient PM2.5 in Delhi. Calculated concentrations compare well to observations. We find that roughly 60% of total population-weighted PM2.5 originates from sources outside the national capital territory of Delhi itself. Consequently, mitigation strategies need to involve neighboring states and address the typical sources there. We discuss the likely evolution of ambient concentrations under different scenarios which assume either current emission control legislation, or application of a Clean Air Scenario foreseeing additional regulations in non-industrial sectors which are often overlooked, such as phase-out of solid fuel cookstoves, and road paving. Only in the case where the Clean Air Scenario is applied both in Delhi as well as in

  15. Greenhouse Gas Source Attribution: Measurements Modeling and Uncertainty Quantification

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhen [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Safta, Cosmin [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Sargsyan, Khachik [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Najm, Habib N. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); van Bloemen Waanders, Bart Gustaaf [Sandia National Lab. (SNL-CA), Livermore, CA (United States); LaFranchi, Brian W. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Ivey, Mark D. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Schrader, Paul E. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Michelsen, Hope A. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Bambha, Ray P. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2014-09-01

    assimilated meteorology fields, making it possible to perform a hybrid simulation, in which the Eulerian model (CMAQ) can be used to compute the initial condi- tion needed by the Lagrangian model, while the source-receptor relationships for a large state vector can be efficiently computed using the Lagrangian model in its backward mode. In ad- dition, CMAQ has a complete treatment of atmospheric chemistry of a suite of traditional air pollutants, many of which could help attribute GHGs from different sources. The inference of emissions sources using atmospheric observations is cast as a Bayesian model calibration problem, which is solved using a variety of Bayesian techniques, such as the bias-enhanced Bayesian inference algorithm, which accounts for the intrinsic model deficiency, Polynomial Chaos Expansion to accelerate model evaluation and Markov Chain Monte Carlo sampling, and Karhunen-Lo %60 eve (KL) Expansion to reduce the dimensionality of the state space. We have established an atmospheric measurement site in Livermore, CA and are collect- ing continuous measurements of CO2 , CH4 and other species that are typically co-emitted with these GHGs. Measurements of co-emitted species can assist in attributing the GHGs to different emissions sectors. Automatic calibrations using traceable standards are performed routinely for the gas-phase measurements. We are also collecting standard meteorological data at the Livermore site as well as planetary boundary height measurements using a ceilometer. The location of the measurement site is well suited to sample air transported between the San Francisco Bay area and the California Central Valley.

  16. Source attribution of black carbon in Arctic snow.

    Science.gov (United States)

    Hegg, Dean A; Warren, Stephen G; Grenfell, Thomas C; Doherty, Sarah J; Larson, Timothy V; Clarke, Antony D

    2009-06-01

    Snow samples obtained at 36 sites in Alaska, Canada, Greenland, Russia, and the Arctic Ocean in early 2007 were analyzed for light-absorbing aerosol concentration together with a suite of associated chemical species. The light absorption data, interpreted as black carbon concentrations, and other chemical data were input into the EPA PMF 1.1 receptor model to explore the sources for black carbon in the snow. The analysis found four factors or sources: two distinct biomass burning sources, a pollution source, and a marine source. The first three of these were responsible for essentially all of the black carbon, with the two biomass sources (encompassing both open and closed combustion) together accounting for >90% of the black carbon.

  17. Inferring source attribution from a multiyear multisource data set of Salmonella in Minnesota.

    Science.gov (United States)

    Ahlstrom, C; Muellner, P; Spencer, S E F; Hong, S; Saupe, A; Rovira, A; Hedberg, C; Perez, A; Muellner, U; Alvarez, J

    2017-12-01

    Salmonella enterica is a global health concern because of its widespread association with foodborne illness. Bayesian models have been developed to attribute the burden of human salmonellosis to specific sources with the ultimate objective of prioritizing intervention strategies. Important considerations of source attribution models include the evaluation of the quality of input data, assessment of whether attribution results logically reflect the data trends and identification of patterns within the data that might explain the detailed contribution of different sources to the disease burden. Here, more than 12,000 non-typhoidal Salmonella isolates from human, bovine, porcine, chicken and turkey sources that originated in Minnesota were analysed. A modified Bayesian source attribution model (available in a dedicated R package), accounting for non-sampled sources of infection, attributed 4,672 human cases to sources assessed here. Most (60%) cases were attributed to chicken, although there was a spike in cases attributed to a non-sampled source in the second half of the study period. Molecular epidemiological analysis methods were used to supplement risk modelling, and a visual attribution application was developed to facilitate data exploration and comprehension of the large multiyear data set assessed here. A large amount of within-source diversity and low similarity between sources was observed, and visual exploration of data provided clues into variations driving the attribution modelling results. Results from this pillared approach provided first attribution estimates for Salmonella in Minnesota and offer an understanding of current data gaps as well as key pathogen population features, such as serotype frequency, similarity and diversity across the sources. Results here will be used to inform policy and management strategies ultimately intended to prevent and control Salmonella infection in the state. © 2017 Blackwell Verlag GmbH.

  18. Attributing human salmonellosis and campylobacteriosis to food, animal and environmental sources

    DEFF Research Database (Denmark)

    Pires, Sara Monteiro

    to the responsible sources, compare methods and results, and make recommendations on which approach to choose to answer specific risk management questions. The work is based on six manuscripts. In the first manuscript, concepts and terminology on source attribution are presented, and the remaining manuscripts...... recommendations on how to choose one or more source attribution methods to address different risk management problems. For this purpose, a “source attribution tool-box” based on the experiences from this PhD was developed....... sources of the pathogen and estimate the relative contribution of each source to the burden of human disease. A variety of methods to attribute human illness to specific sources is available, including microbial subtyping, comparative exposure assessment, analysis of studies of sporadic infections...

  19. Using Outbreak Data for Source Attribution of Human Salmonellosis and Campylobacteriosis in Europe

    DEFF Research Database (Denmark)

    Pires, Sara Monteiro; Vigre, Håkan; Makela, Pia

    2010-01-01

    % of campylobacteriosis cases were attributed to chicken. Results also revealed regional differences in the relative importance of specific sources. We assessed the method to be of limited value to attribute human campylobacteriosis due to the limited number of outbreaks. Nevertheless, the presented source attribution...... are observed at the public health endpoint and can therefore be a direct measure of attribution at the point of exposure. An analysis or summary of outbreak investigations is useful for attributing illnesses to foods, but often the implicated foods in reported outbreaks are complex foods, containing several...... food items, many of which could be the specific source of the infection. We describe a method that is able to attribute human cases to specific food items contained in complex foods. The model is based on data from investigations of Salmonella and Campylobacter outbreaks in the European Union in 2005...

  20. Preliminary experiments with a cusp-field ion source

    International Nuclear Information System (INIS)

    Bickes, R.W. Jr.; O'Hagan, J.B.

    1980-12-01

    Preliminary experiments with a cusp field ion source have been completed. Measurements were made of the total ion current and mass and energy distributions as a function of source operating conditions and cusp field geometry. These experiments have indicated that a cusp field source may be used in the Sandia Neutron Generator for Cancer Therapy and may permit the incorporation of a simplified unpumped accelerator design. Suggestions for future work are briefly outlined

  1. Authorship attribution of source code by using back propagation neural network based on particle swarm optimization.

    Science.gov (United States)

    Yang, Xinyu; Xu, Guoai; Li, Qi; Guo, Yanhui; Zhang, Miao

    2017-01-01

    Authorship attribution is to identify the most likely author of a given sample among a set of candidate known authors. It can be not only applied to discover the original author of plain text, such as novels, blogs, emails, posts etc., but also used to identify source code programmers. Authorship attribution of source code is required in diverse applications, ranging from malicious code tracking to solving authorship dispute or software plagiarism detection. This paper aims to propose a new method to identify the programmer of Java source code samples with a higher accuracy. To this end, it first introduces back propagation (BP) neural network based on particle swarm optimization (PSO) into authorship attribution of source code. It begins by computing a set of defined feature metrics, including lexical and layout metrics, structure and syntax metrics, totally 19 dimensions. Then these metrics are input to neural network for supervised learning, the weights of which are output by PSO and BP hybrid algorithm. The effectiveness of the proposed method is evaluated on a collected dataset with 3,022 Java files belong to 40 authors. Experiment results show that the proposed method achieves 91.060% accuracy. And a comparison with previous work on authorship attribution of source code for Java language illustrates that this proposed method outperforms others overall, also with an acceptable overhead.

  2. The Prevalence and Quality of Source Attribution in Middle and High School Science Papers

    Science.gov (United States)

    Vieyra, Michelle; Weaver, Kari

    2016-01-01

    Plagiarism is a commonly cited problem in higher education, especially in scientific writing and assignments for science courses. Students may not intentionally plagiarize, but may instead be confused about what proper source attribution entails. Much of this confusion likely stems from high school, either from lack of or inconsistent instruction…

  3. A content analysis of depression-related discourses on Sina Weibo: attribution, efficacy, and information sources.

    Science.gov (United States)

    Pan, Jiabao; Liu, Bingjie; Kreps, Gary L

    2018-06-20

    Depression is a mood disorder that may lead to severe outcomes including mental breakdown, self-injury, and suicide. Potential causes of depression include genetic, sociocultural, and individual-level factors. However, public understandings of depression guided by a complex interplay of media and other societal discourses might not be congruent with the scientific knowledge. Misunderstandings of depression can lead to under-treatment and stigmatization of depression. Against this backdrop, this study aims to achieve a holistic understanding of the patterns and dynamics in discourses about depression from various information sources in China by looking at related posts on social media. A content analysis was conducted with 902 posts about depression randomly selected within a three-year period (2014 to 2016) on the mainstream social media platform in China, Sina Weibo. Posts were analyzed with a focus on attributions of and solutions to depression, attitudes towards depression, and efficacy indicated by the posts across various information sources. Results suggested that depression was most often attributed to individual-level factors. Across all the sources, individual-level attributions were often adopted by state-owned media whereas health and academic experts and organizations most often mentioned biological causes of depression. Citizen journalists and unofficial social groups tended to make societal-level attributions. Overall, traditional media posts suggested the lowest efficacy in coping with depression and the most severe negative outcomes as compared with other sources. The dominance of individual-level attributions and solutions regarding depression on Chinese social media on one hand manifests the public's limited understanding of depression and on the other hand, may further constrain adoption of scientific explanations about depression and exacerbate stigmatization towards depressed individuals. Mass media's posts centered on description of severe

  4. Causal attributions, real life-events and personality characteristics : a preliminary study

    NARCIS (Netherlands)

    SANDERMAN, R

    1986-01-01

    The learned-helplessness model has been given much attention recently. In this article some issues are briefly reviewed, the main purpose of this study was, however, to determine the relationship between causal attributions and personality characteristics, symptoms and feelings of well-being.

  5. Nuclear Forensics Attributing the Source of Spent Fuel Used in an RDD Event

    International Nuclear Information System (INIS)

    Scott, M.R.

    2005-01-01

    An RDD attack against the U.S. is something America needs to prepare against. If such an event occurs the ability to quickly identify the source of the radiological material used in an RDD would aid investigators in identifying the perpetrators. Spent fuel is one of the most dangerous possible radiological sources for an RDD. In this work, a forensics methodology was developed and implemented to attribute spent fuel to a source reactor. The specific attributes determined are the spent fuel burnup, age from discharge, reactor type, and initial fuel enrichment. It is shown that by analyzing the post-event material, these attributes can be determined with enough accuracy to be useful for investigators. The burnup can be found within a 5% accuracy, enrichment with a 2% accuracy, and age with a 10% accuracy. Reactor type can be determined if specific nuclides are measured. The methodology developed was implemented into a code call NEMASYS. NEMASYS is easy to use and it takes a minimum amount of time to learn its basic functions. It will process data within a few minutes and provide detailed information about the results and conclusions

  6. Source Attribution of Methane Emissions in Northeastern Colorado Using Ammonia to Methane Emission Ratios

    Science.gov (United States)

    Eilerman, S. J.; Neuman, J. A.; Peischl, J.; Aikin, K. C.; Ryerson, T. B.; Perring, A. E.; Robinson, E. S.; Holloway, M.; Trainer, M.

    2015-12-01

    Due to recent advances in extraction technology, oil and natural gas extraction and processing in the Denver-Julesburg basin has increased substantially in the past decade. Northeastern Colorado is also home to over 250 concentrated animal feeding operations (CAFOs), capable of hosting over 2 million head of ruminant livestock (cattle and sheep). Because of methane's high Global Warming Potential, quantification and attribution of methane emissions from oil and gas development and agricultural activity are important for guiding greenhouse gas emission policy. However, due to the co-location of these different sources, top-down measurements of methane are often unable to attribute emissions to a specific source or sector. In this work, we evaluate the ammonia:methane emission ratio directly downwind of CAFOs using a mobile laboratory. Several CAFOs were chosen for periodic study over a 12-month period to identify diurnal and seasonal variation in the emission ratio as well as differences due to livestock type. Using this knowledge of the agricultural ammonia:methane emission ratio, aircraft measurements of ammonia and methane over oil and gas basins in the western US during the Shale Oil and Natural Gas Nexus (SONGNEX) field campaign in March and April 2015 can be used for source attribution of methane emissions.

  7. Nuclear Forensics Attributing the Source of Spent Fuel Used in an RDD Event

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Mark Robert [Texas A & M Univ., College Station, TX (United States)

    2005-05-01

    An RDD attack against the U.S. is something America needs to prepare against. If such an event occurs the ability to quickly identify the source of the radiological material used in an RDD would aid investigators in identifying the perpetrators. Spent fuel is one of the most dangerous possible radiological sources for an RDD. In this work, a forensics methodology was developed and implemented to attribute spent fuel to a source reactor. The specific attributes determined are the spent fuel burnup, age from discharge, reactor type, and initial fuel enrichment. It is shown that by analyzing the post-event material, these attributes can be determined with enough accuracy to be useful for investigators. The burnup can be found within a 5% accuracy, enrichment with a 2% accuracy, and age with a 10% accuracy. Reactor type can be determined if specific nuclides are measured. The methodology developed was implemented into a code call NEMASYS. NEMASYS is easy to use and it takes a minimum amount of time to learn its basic functions. It will process data within a few minutes and provide detailed information about the results and conclusions.

  8. Optimized spectroscopic scheme for enhanced precision CO measurements with applications to urban source attribution

    Science.gov (United States)

    Nottrott, A.; Hoffnagle, J.; Farinas, A.; Rella, C.

    2014-12-01

    Carbon monoxide (CO) is an urban pollutant generated by internal combustion engines which contributes to the formation of ground level ozone (smog). CO is also an excellent tracer for emissions from mobile combustion sources. In this work we present an optimized spectroscopic sampling scheme that enables enhanced precision CO measurements. The scheme was implemented on the Picarro G2401 Cavity Ring-Down Spectroscopy (CRDS) analyzer which measures CO2, CO, CH4 and H2O at 0.2 Hz. The optimized scheme improved the raw precision of CO measurements by 40% from 5 ppb to 3 ppb. Correlations of measured CO2, CO, CH4 and H2O from an urban tower were partitioned by wind direction and combined with a concentration footprint model for source attribution. The application of a concentration footprint for source attribution has several advantages. The upwind extent of the concentration footprint for a given sensor is much larger than the flux footprint. Measurements of mean concentration at the sensor location can be used to estimate source strength from a concentration footprint, while measurements of the vertical concentration flux are necessary to determine source strength from the flux footprint. Direct measurement of vertical concentration flux requires high frequency temporal sampling and increases the cost and complexity of the measurement system.

  9. Comparing different types of source memory attributes in dementia of Alzheimer's type.

    Science.gov (United States)

    Mammarella, Nicola; Fairfield, Beth; Di Domenico, Alberto

    2012-04-01

    Source monitoring (SM) refers to our ability to discriminate between memories from different sources. Twenty healthy high-cognitive functioning older adults, 20 healthy low-cognitive functioning older adults, and 20 older adults with dementia of Alzheimer's type (DAT) were asked to perform a series of SM tasks that varied in terms of the to-be-remembered source attribute (perceptual, spatial, temporal, semantic, social, and affective details). Results indicated that older DAT adults had greater difficulty in SM compared to the healthy control groups, especially with spatial and semantic details. Data are discussed in terms of the SM framework and suggest that poor memory for some types of source information may be considered as an important indicator of clinical memory function when assessing for the presence and severity of dementia.

  10. Preliminary design of the advanced quantum beam source

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Cheol; Lee, Jong Min; Jeong, Young Uk; Cho, Sung Oh; Yoo, Jae Gwon; Park, Seong Hee

    2000-07-01

    The preliminary design of the advanced quantum beam source based on a superconducting electron accelerator is presented. The advanced quantum beams include: high power free electron lasers, monochromatic X-rays and {gamma}-rays, high-power medium-energy electrons, high-flux pulsed neutrons, and high-flux monochromatic slow positron beam. The AQBS system is being re-designed, assuming that the SPS superconducting RF cavities used for LEP at CERN will revived as a main accelerator of the AQBS system at KAERI, after the decommissioning of LEP at the end of 2000. Technical issues of using the SPS superconducting RF cavities for the AQBS project are discussed in this report. The advanced quantum beams will be used for advanced researches in science and industries.

  11. Preliminary design concepts for the advanced neutron source reactor systems

    International Nuclear Information System (INIS)

    Peretz, F.J.

    1988-01-01

    This paper describes the initial design work to develop the reactor systems hardware concepts for the advanced neutron source (ANS) reactor. This project has not yet entered the conceptual design phase; thus, design efforts are quite preliminary. This paper presents the collective work of members of the Oak Ridge National Laboratory, Martin Marietta Energy Systems, Inc., Engineering Division, and other participating organizations. The primary purpose of this effort is to show that the ANS reactor concept is realistic from a hardware standpoint and to show that project objectives can be met. It also serves to generate physical models for use in neutronic and thermal-hydraulic core design efforts and defines the constraints and objectives for the design. Finally, this effort will develop the criteria for use in the conceptual design of the reactor

  12. Preliminary design of the advanced quantum beam source

    International Nuclear Information System (INIS)

    Lee, Byung Cheol; Lee, Jong Min; Jeong, Young Uk; Cho, Sung Oh; Yoo, Jae Gwon; Park, Seong Hee

    2000-07-01

    The preliminary design of the advanced quantum beam source based on a superconducting electron accelerator is presented. The advanced quantum beams include: high power free electron lasers, monochromatic X-rays and γ-rays, high-power medium-energy electrons, high-flux pulsed neutrons, and high-flux monochromatic slow positron beam. The AQBS system is being re-designed, assuming that the SPS superconducting RF cavities used for LEP at CERN will revived as a main accelerator of the AQBS system at KAERI, after the decommissioning of LEP at the end of 2000. Technical issues of using the SPS superconducting RF cavities for the AQBS project are discussed in this report. The advanced quantum beams will be used for advanced researches in science and industries

  13. Preliminary Tests Of The Decris-sc Ion Source

    CERN Document Server

    Efremov, A; Bechterev, V; Bogomolov, S L; Bondarenko, P G; Datskov, V I; Dmitriev, S; Drobin, V; Lebedev, A; Leporis, M; Malinowski, H; Nikiforov, A; Paschenko, S V; Seleznev, V; Shishov, Yu A; Smirnov, Yu; Tsvineva, G; Yakovlev, B; Yazvitsky, N Yu

    2004-01-01

    A new "liquid He-free" superconducting Electron Cyclotron Resonance Ion Source DECRIS-SC, to be used as injector for the IC-100 small cyclotron, has been designed by FLNR and LHE JINR. The main feature is that a compact refrigerator of Gifford-McMahon type is used to cool the solenoid coils. For the reason of very small cooling power at 4.2 K (about 1 W) our efforts were to optimize the magnetic structure and minimize an external heating of the coils. The maximum magnetic field strength is 3 T and 2 T in injection and extraction region respectively. For the radial plasma confinement a hexapole made of NdFeB permanent magnet is used. The source will be capable of ECR plasma heating using different frequencies (14 GHz or 18 GHz). To be able to deliver usable intensities of solids, the design is also allow axial access for evaporation oven and metal samples using the plasma sputtering technique. Very preliminary results of the source test are presented.

  14. Identification, Attribution, and Quantification of Highly Heterogeneous Methane Sources Using a Mobile Stable Isotope Analyzer

    Science.gov (United States)

    Crosson, E.; Rella, C.; Cunningham, K.

    2012-04-01

    Despite methane's importance as a potent greenhouse gas second only to carbon dioxide in the magnitude of its contribution to global warming, natural contributions to the overall methane budget are only poorly understood. A big contributor to this gap in knowledge is the highly spatially and temporally heterogeneous nature of most natural (and for that matter anthropogenic) methane sources. This high degree of heterogeneity, where the methane emission rates can vary over many orders of magnitude on a spatial scale of meters or even centimeters, and over a temporal scale of minutes or even seconds, means that traditional methods of emissions flux estimation, such as flux chambers or eddy-covariance, are difficult or impossible to apply. In this paper we present new measurement methods that are capable of detecting, attributing, and quantifying emissions from highly heterogeneous sources. These methods take full advantage of the new class of methane concentration and stable isotope analyzers that are capable of laboratory-quality analysis from a mobile field platform in real time. In this paper we present field measurements demonstrating the real-time detection of methane 'hot spots,' attribution of the methane to a source process via real-time stable isotope analysis, and quantification of the emissions flux using mobile concentration measurements of the horizontal and vertical atmospheric dispersion, combined with atmospheric transport calculations. Although these techniques are applicable to both anthropogenic and natural methane sources, in this initial work we focus primarily on landfills and fugitive emissions from natural gas distribution, as these sources are better characterized, and because they provide a more reliable and stable source of methane for quantifying the measurement uncertainty inherent in the different methods. Implications of these new technologies and techniques are explored for the quantification of natural methane sources in a variety of

  15. Molecular Approaches to Understanding Transmission and Source Attribution in Nontyphoidal Salmonella and Their Application in Africa.

    Science.gov (United States)

    Mather, Alison E; Vaughan, Timothy G; French, Nigel P

    2015-11-01

    Nontyphoidal Salmonella (NTS) is a frequent cause of diarrhea around the world, yet in many African countries it is more commonly associated with invasive bacterial disease. Various source attribution models have been developed that utilize microbial subtyping data to assign cases of human NTS infection to different animal populations and foods of animal origin. Advances in molecular microbial subtyping approaches, in particular whole-genome sequencing, provide higher resolution data with which to investigate these sources. In this review, we provide updates on the source attribution models developed for Salmonella, and examine the application of whole-genome sequencing data combined with evolutionary modeling to investigate the putative sources and transmission pathways of NTS, with a focus on the epidemiology of NTS in Africa. This is essential information to decide where, what, and how control strategies might be applied most effectively. © The Author 2015. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  16. Identification of Multiple Subtypes of Campylobacter jejuni in Chicken Meat and the Impact on Source Attribution

    Directory of Open Access Journals (Sweden)

    John A. Hudson

    2013-09-01

    Full Text Available Most source attribution studies for Campylobacter use subtyping data based on single isolates from foods and environmental sources in an attempt to draw epidemiological inferences. It has been suggested that subtyping only one Campylobacter isolate per chicken carcass incurs a risk of failing to recognise the presence of clinically relevant, but numerically infrequent, subtypes. To investigate this, between 21 and 25 Campylobacter jejuni isolates from each of ten retail chicken carcasses were subtyped by pulsed-field gel electrophoresis (PFGE using the two restriction enzymes SmaI and KpnI. Among the 227 isolates, thirteen subtypes were identified, the most frequently occurring subtype being isolated from three carcasses. Six carcasses carried a single subtype, three carcasses carried two subtypes each and one carcass carried three subtypes. Some subtypes carried by an individual carcass were shown to be potentially clonally related. Comparison of C. jejuni subtypes from chickens with isolate subtypes from human clinical cases (n = 1248 revealed seven of the thirteen chicken subtypes were indistinguishable from human cases. None of the numerically minor chicken subtypes were identified in the human data. Therefore, typing only one Campylobacter isolate from individual chicken carcasses may be adequate to inform Campylobacter source attribution.

  17. Source attribution of black carbon and its direct radiative forcing in China

    International Nuclear Information System (INIS)

    Yang, Yang; Wang, Hailong; Ma, Po-Lun; Rasch, Philip J.; Smith, Steven J.

    2017-01-01

    The source attributions for mass concentration, haze formation, transport and direct radiative forcing of black carbon (BC) in various regions of China are quantified in this study using the Community Earth System Model (CESM) with a source-tagging technique. Anthropogenic emissions are from the Community Emissions Data System that is newly developed for the Coupled Model Intercomparison Project Phase 6 (CMIP6). Over north China where the air quality is often poor, about 90 % of near-surface BC concentration is contributed by local emissions. Overall, 35 % of BC concentration over south China in winter can be attributed to emissions from north China, and 19 % comes from sources outside China in spring. For other regions in China, BC is largely contributed from nonlocal sources. We further investigated potential factors that contribute to the poor air quality in China. During polluted days, a net inflow of BC transported from nonlocal source regions associated with anomalous winds plays an important role in increasing local BC concentrations. BC-containing particles emitted from East Asia can also be transported across the Pacific. Our model results show that emissions from inside and outside China are equally important for the BC outflow from East Asia, while emissions from China account for 8 % of BC concentration and 29 % in column burden in the western United States in spring. Radiative forcing estimates show that 65 % of the annual mean BC direct radiative forcing (2.2 W m -2 ) in China results from local emissions, and the remaining 35 % is contributed by emissions outside of China. Efficiency analysis shows that a reduction in BC emissions over eastern China could have a greater benefit for the regional air quality in China, especially in the winter haze season.

  18. Development of a user-friendly interface version of the Salmonella source-attribution model

    DEFF Research Database (Denmark)

    Hald, Tine; Lund, Jan

    of travel and outbreak-related cases, also per country and subtype, ii) food-animal prevalence data per country and subtype, including the number of units tested and the number of positive units, and iii) data on the production and trade of the different food-animal sources in the EU Member States. The EFSA...... cases by subtype including data on the number of travel, domestic, unknown travel history and outbreak-related cases, also per subtype, ii) food-animal prevalence data per subtype, including the number of units tested and the number of positive units, and iii) data on the amount of the included animal...... for example in future mandates dealing with similar questions. The objective of the work described in this report was, therefore, to develop a flexible and user-friendly interface for attributing human cases of food-borne pathogens to the responsible food-animal reservoirs and/or food sources. The interface...

  19. Sensory Attributes and Preliminary Characterization of Milk Chocolate Bar Enriched with Cinnamon Essential Oil

    Science.gov (United States)

    Ilmi, A.; Praseptiangga, D.; Muhammad, D. R. A.

    2017-04-01

    Cocoa (Theobroma cacao) is one of Indonesia's main commodities with annually increasing production. Chocolates are semi-solid suspensions of fine solid particles in a continuous fat phase. Primary chocolate categories are dark, milk, and white that differs in content of cocoa solid, milk fat, and cocoa butter. Milk chocolate bar is one of the most popular processed cocoa products in Indonesia. Widely cultivated in Indonesia, cinnamon is potential to be developed and is expected to add flavor and taste as well as enhance functional properties of milk chocolate, since it is well-known of its high antioxidant properties. The aim of this study was to determine the effect of cinnamon essential oil addition on the sensory attributes and physicochemical properties of milk chocolate bar. Three formulas of milk chocolate bar with an addition of cinnamon essential oil (0.1%, 0.3%, and 0.5%) were evaluated in this study. Panelists acceptance level decreased with increasing concentrations of cinnamon essential oil added, while moisture content and color analysis results did not show any significantly different for each formula, suggesting that milk chocolate bar with the addition of 0.1% of cinnamon essential oil had the highest level of acceptance and preferences for some of properties evaluated.

  20. Source attribution and credibility of health and appearance exercise advertisements: relationship with implicit and explicit attitudes and intentions.

    Science.gov (United States)

    Berry, Tanya R; Shields, Chris

    2014-02-01

    The relationship of attributed source (commercial or nonprofit) and credibility of exercise advertisements to explicit and implicit exercise-related attitudes and intentions was examined. Male and female participants (N = 227) were randomly assigned to watch health or appearance-related advertisements and then completed an implicit attitudes task and questionnaires. Health advertisements and those attributed to a nonprofit source were rated more credible. Appearance condition participants who attributed the advertisement to a nonprofit source also rated the advertisement as more credible. Participants who rated a commercial advertisement as credible reported higher implicit instrumental attitudes. Implications for exercise promotion are discussed.

  1. Premature deaths attributed to source-specific BC emissions in six urban US regions

    International Nuclear Information System (INIS)

    Turner, Matthew D; Henze, Daven K; Capps, Shannon L; Hakami, Amir; Zhao, Shunliu; Resler, Jaroslav; Carmichael, Gregory R; Stanier, Charles O; Baek, Jaemeen; Sandu, Adrian; Russell, Armistead G; Nenes, Athanasios; Pinder, Rob W; Napelenok, Sergey L; Bash, Jesse O; Percell, Peter B; Chai, Tianfeng

    2015-01-01

    Recent studies have shown that exposure to particulate black carbon (BC) has significant adverse health effects and may be more detrimental to human health than exposure to PM 2.5 as a whole. Mobile source BC emission controls, mostly on diesel-burning vehicles, have successfully decreased mobile source BC emissions to less than half of what they were 30 years ago. Quantification of the benefits of previous emissions controls conveys the value of these regulatory actions and provides a method by which future control alternatives could be evaluated. In this study we use the adjoint of the Community Multiscale Air Quality (CMAQ) model to estimate highly-resolved spatial distributions of benefits related to emission reductions for six urban regions within the continental US. Emissions from outside each of the six chosen regions account for between 7% and 27% of the premature deaths attributed to exposure to BC within the region. While we estimate that nonroad mobile and onroad diesel emissions account for the largest number of premature deaths attributable to exposure to BC, onroad gasoline is shown to have more than double the benefit per unit emission relative to that of nonroad mobile and onroad diesel. Within the region encompassing New York City and Philadelphia, reductions in emissions from large industrial combustion sources that are not classified as EGUs (i.e., non-EGU) are estimated to have up to triple the benefits per unit emission relative to reductions to onroad diesel sectors, and provide similar benefits per unit emission to that of onroad gasoline emissions in the region. While onroad mobile emissions have been decreasing in the past 30 years and a majority of vehicle emission controls that regulate PM focus on diesel emissions, our analysis shows the most efficient target for stricter controls is actually onroad gasoline emissions. (letter)

  2. Impacts of Irradiation Sources on Quality Attributes of Low-salt Sausage during Refrigerated Storage

    Science.gov (United States)

    Kim, Hyun-Wook; Choi, Yun-Sang

    2017-01-01

    This study was performed to investigate the impacts of irradiation sources on quality attributes of low-salt sausage during refrigerated storage. Control sausage was prepared with 1.5% sodium chloride (NaCl), whereas low-salt sausage was formulated with 0.75% NaCl (a 50% reduction; L-control). Sausage samples were vacuum-packaged, and low-sausages were irradiated with gamma-ray, electron-beam and X-ray at 5 kGy, respectively. The samples were stored at 4°C for 28 d to determine changes in quality attributes. The pH of low-salt sausages was unaffected by irradiation at 5 kGy (p>0.05). Higher redness values were found at irradiated low-salt sausages compared to control (psausage were higher than those of low-salt sausages (psausage treatments. The overall sensory acceptability score of irradiated/low-salt sausages were lower than L-control due to decreased scores for cooked meat flavor but increased radiolytic off-flavor (psausages were higher than control and L-control (psausages (psausages, and suggest that further studies should be necessary to reducing radiolytic off-flavor of irradiated/low-salt sausages. PMID:29147093

  3. Country of origin image attributes as a source of competitive advantage: study in international brazilian fashion industry

    Directory of Open Access Journals (Sweden)

    Mariana Bassi Sutter

    2014-08-01

    Full Text Available The study sought to understand which attributes of the country of origin image are source of international competitive advantage in the context of Brazilian fashion. From the theoretical framework related to competitive advantage, country of origin image, Brazilianness and their attributes in fashion, we conducted exploratory research with a qualitative approach. The results suggest that the image of Brazil is understood by the international fashion market in accordance with the attributes of the literature. However (i in fashion, market still does not have a steady concept on the image of Brazil, (ii Brazilianness attributes in fashion can be a source of competitive advantage in international trades if they are communicated, promoted and understood by the international market; finally, (iii among the eight Brazilianness trendy attributes identified in the literature, four were highlighted as differentiators: shape and volumes, colors, prints and lifestyle.

  4. Global source attribution of sulfate concentration and direct and indirect radiative forcing

    Science.gov (United States)

    Yang, Yang; Wang, Hailong; Smith, Steven J.; Easter, Richard; Ma, Po-Lun; Qian, Yun; Yu, Hongbin; Li, Can; Rasch, Philip J.

    2017-07-01

    The global source-receptor relationships of sulfate concentrations, and direct and indirect radiative forcing (DRF and IRF) from 16 regions/sectors for years 2010-2014 are examined in this study through utilizing a sulfur source-tagging capability implemented in the Community Earth System Model (CESM) with winds nudged to reanalysis data. Sulfate concentrations are mostly contributed by local emissions in regions with high emissions, while over regions with relatively low SO2 emissions, the near-surface sulfate concentrations are primarily attributed to non-local sources from long-range transport. Regional source efficiencies of sulfate concentrations are higher over regions with dry atmospheric conditions and less export, suggesting that lifetime of aerosols, together with regional export, is important in determining regional air quality. The simulated global total sulfate DRF is -0.42 W m-2, with -0.31 W m-2 contributed by anthropogenic sulfate and -0.11 W m-2 contributed by natural sulfate, relative to a state with no sulfur emissions. In the Southern Hemisphere tropics, dimethyl sulfide (DMS) contributes 17-84 % to the total DRF. East Asia has the largest contribution of 20-30 % over the Northern Hemisphere mid- and high latitudes. A 20 % perturbation of sulfate and its precursor emissions gives a sulfate incremental IRF of -0.44 W m-2. DMS has the largest contribution, explaining -0.23 W m-2 of the global sulfate incremental IRF. Incremental IRF over regions in the Southern Hemisphere with low background aerosols is more sensitive to emission perturbation than that over the polluted Northern Hemisphere.

  5. Investigating microearthquake finite source attributes with IRIS Community Wavefield Demonstration Experiment in Oklahoma

    Science.gov (United States)

    Fan, Wenyuan; McGuire, Jeffrey J.

    2018-05-01

    An earthquake rupture process can be kinematically described by rupture velocity, duration and spatial extent. These key kinematic source parameters provide important constraints on earthquake physics and rupture dynamics. In particular, core questions in earthquake science can be addressed once these properties of small earthquakes are well resolved. However, these parameters of small earthquakes are poorly understood, often limited by available datasets and methodologies. The IRIS Community Wavefield Experiment in Oklahoma deployed ˜350 three component nodal stations within 40 km2 for a month, offering an unprecedented opportunity to test new methodologies for resolving small earthquake finite source properties in high resolution. In this study, we demonstrate the power of the nodal dataset to resolve the variations in the seismic wavefield over the focal sphere due to the finite source attributes of a M2 earthquake within the array. The dense coverage allows us to tightly constrain rupture area using the second moment method even for such a small earthquake. The M2 earthquake was a strike-slip event and unilaterally propagated towards the surface at 90 per cent local S- wave speed (2.93 km s-1). The earthquake lasted ˜0.019 s and ruptured Lc ˜70 m by Wc ˜45 m. With the resolved rupture area, the stress-drop of the earthquake is estimated as 7.3 MPa for Mw 2.3. We demonstrate that the maximum and minimum bounds on rupture area are within a factor of two, much lower than typical stress drop uncertainty, despite a suboptimal station distribution. The rupture properties suggest that there is little difference between the M2 Oklahoma earthquake and typical large earthquakes. The new three component nodal systems have great potential for improving the resolution of studies of earthquake source properties.

  6. Aerosol Health Impact Source Attribution Studies with the CMAQ Adjoint Air Quality Model

    Science.gov (United States)

    Turner, M. D.

    Fine particulate matter (PM2.5) is an air pollutant consisting of a mixture of solid and liquid particles suspended in the atmosphere. Knowledge of the sources and distributions of PM2.5 is important for many reasons, two of which are that PM2.5 has an adverse effect on human health and also an effect on climate change. Recent studies have suggested that health benefits resulting from a unit decrease in black carbon (BC) are four to nine times larger than benefits resulting from an equivalent change in PM2.5 mass. The goal of this thesis is to quantify the role of emissions from different sectors and different locations in governing the total health impacts, risk, and maximum individual risk of exposure to BC both nationally and regionally in the US. We develop and use the CMAQ adjoint model to quantify the role of emissions from all modeled sectors, times, and locations on premature deaths attributed to exposure to BC. From a national analysis, we find that damages resulting from anthropogenic emissions of BC are strongly correlated with population and premature death. However, we find little correlation between damages and emission magnitude, suggesting that controls on the largest emissions may not be the most efficient means of reducing damages resulting from BC emissions. Rather, the best proxy for locations with damaging BC emissions is locations where premature deaths occur. Onroad diesel and nonroad vehicle emissions are the largest contributors to premature deaths attributed to exposure to BC, while onroad gasoline emissions cause the highest deaths per amount emitted. Additionally, emissions in fall and winter contribute to more premature deaths (and more per amount emitted) than emissions in spring and summer. From a regional analysis, we find that emissions from outside each of six urban areas account for 7% to 27% of the premature deaths attributed to exposure to BC within the region. Within the region encompassing New York City and Philadelphia

  7. Exploring the uncertainty in attributing sediment contributions in fingerprinting studies due to uncertainty in determining element concentrations in source areas.

    Science.gov (United States)

    Gomez, Jose Alfonso; Owens, Phillip N.; Koiter, Alex J.; Lobb, David

    2016-04-01

    One of the major sources of uncertainty in attributing sediment sources in fingerprinting studies is the uncertainty in determining the concentrations of the elements used in the mixing model due to the variability of the concentrations of these elements in the source materials (e.g., Kraushaar et al., 2015). The uncertainty in determining the "true" concentration of a given element in each one of the source areas depends on several factors, among them the spatial variability of that element, the sampling procedure and sampling density. Researchers have limited control over these factors, and usually sampling density tends to be sparse, limited by time and the resources available. Monte Carlo analysis has been used regularly in fingerprinting studies to explore the probable solutions within the measured variability of the elements in the source areas, providing an appraisal of the probability of the different solutions (e.g., Collins et al., 2012). This problem can be considered analogous to the propagation of uncertainty in hydrologic models due to uncertainty in the determination of the values of the model parameters, and there are many examples of Monte Carlo analysis of this uncertainty (e.g., Freeze, 1980; Gómez et al., 2001). Some of these model analyses rely on the simulation of "virtual" situations that were calibrated from parameter values found in the literature, with the purpose of providing insight about the response of the model to different configurations of input parameters. This approach - evaluating the answer for a "virtual" problem whose solution could be known in advance - might be useful in evaluating the propagation of uncertainty in mixing models in sediment fingerprinting studies. In this communication, we present the preliminary results of an on-going study evaluating the effect of variability of element concentrations in source materials, sampling density, and the number of elements included in the mixing models. For this study a virtual

  8. Global source attribution of sulfate concentration and direct and indirect radiative forcing

    Directory of Open Access Journals (Sweden)

    Y. Yang

    2017-07-01

    Full Text Available The global source–receptor relationships of sulfate concentrations, and direct and indirect radiative forcing (DRF and IRF from 16 regions/sectors for years 2010–2014 are examined in this study through utilizing a sulfur source-tagging capability implemented in the Community Earth System Model (CESM with winds nudged to reanalysis data. Sulfate concentrations are mostly contributed by local emissions in regions with high emissions, while over regions with relatively low SO2 emissions, the near-surface sulfate concentrations are primarily attributed to non-local sources from long-range transport. Regional source efficiencies of sulfate concentrations are higher over regions with dry atmospheric conditions and less export, suggesting that lifetime of aerosols, together with regional export, is important in determining regional air quality. The simulated global total sulfate DRF is −0.42 W m−2, with −0.31 W m−2 contributed by anthropogenic sulfate and −0.11 W m−2 contributed by natural sulfate, relative to a state with no sulfur emissions. In the Southern Hemisphere tropics, dimethyl sulfide (DMS contributes 17–84 % to the total DRF. East Asia has the largest contribution of 20–30 % over the Northern Hemisphere mid- and high latitudes. A 20 % perturbation of sulfate and its precursor emissions gives a sulfate incremental IRF of −0.44 W m−2. DMS has the largest contribution, explaining −0.23 W m−2 of the global sulfate incremental IRF. Incremental IRF over regions in the Southern Hemisphere with low background aerosols is more sensitive to emission perturbation than that over the polluted Northern Hemisphere.

  9. Seasonal Characteristics of Widespread Ozone Pollution in China and India: Current Model Capabilities and Source Attributions

    Science.gov (United States)

    Gao, M.; Song, S.; Beig, G.; Zhang, H.; Hu, J.; Ying, Q.; McElroy, M. B.

    2017-12-01

    Fast urbanization and industrialization in China and India have led to severe ozone pollution, threatening public health in these densely populated countries. We show the spatial and seasonal characteristics of ozone concentrations using nation-wide observations for these two countries in 2013. We used the Weather Research and Forecasting model coupled to chemistry (WRF-Chem) to conduct one-year simulations and to evaluate how current models capture the important photochemical processes using the exhaustive available datasets in China and India, including surface measurements, ozonesonde data and satellite retrievals. We also employed the factor separation approach to distinguish the contributions of different sectors to ozone during different seasons. The back trajectory model FLEXPART was applied to investigate the role of transport in highly polluted regions (e.g., North China Plain, Yangtze River delta, and Pearl River Delta) during different seasons. Preliminary results indicate that the WRF-Chem model provides a satisfactory representation of the temporal and spatial variations of ozone for both China and India. The factor separation approach offers valuable insights into relevant sources of ozone for both countries providing valuable guidance for policy options designed to mitigate the related problem.

  10. Attributing human foodborne illness to food sources and water in Latin America and the Caribbean using data from outbreak investigations

    DEFF Research Database (Denmark)

    Pires, Sara Monteiro; Vieira, Antonio; Perez, Enrique

    2012-01-01

    &C). Foods implicated in outbreaks were classified by their ingredients as simple foods (i.e. belonging to one single food category), or complex foods (i.e. belonging to multiple food categories). For each agent, the data from simple-food outbreaks were summarized, and the proportion of outbreaks caused...... by each category was used to define the probability that an outbreak was caused by a source. For the calculation of the number of outbreaks attributed to each source, simple-food outbreaks were attributed to the single food category in question, and complex-food outbreaks were partitioned to each category......Foodborne pathogens are responsible for an increasing burden of disease worldwide. Knowledge on the contribution of different food sources and water for disease is essential to prioritize food safety interventions and implement appropriate control measures. Source attribution using outbreak data...

  11. Let another praise you? The effects of source and attributional content on responses to group-directed praise.

    Science.gov (United States)

    Rabinovich, Anna; Morton, Thomas A; Crook, Michael; Travers, Claire

    2012-12-01

    Not all types of praise may be equally stimulating. Instead, positive feedback carries different meaning depending on the source that delivers it and the attributions for success that it contains. In the present study, source (in-group vs. out-group) of praise and its content (attributing success to internal vs. external causes) were experimentally manipulated. The results revealed that there was a significant interaction between source and content of praise on performance in a praise-related task. As predicted, participants exposed to out-group praise were motivated by external attributions for success rather than by internal attributions. Conversely, when praise originated from an in-group source, the attributional content of praise did not affect performance. This effect of source and content of praise on relevant behaviour was mediated by willingness to protect group image. Thus, responses to praise are contingent on what it implies about group success--corresponding to patterns demonstrated in previous work on group-directed criticism. ©2012 The British Psychological Society.

  12. Source Attribution of Cyanides using Anionic Impurity Profiling, Stable Isotope Ratios, Trace Elemental Analysis and Chemometrics

    Energy Technology Data Exchange (ETDEWEB)

    Mirjankar, Nikhil S.; Fraga, Carlos G.; Carman, April J.; Moran, James J.

    2016-01-08

    Chemical attribution signatures (CAS) for chemical threat agents (CTAs) are being investigated to provide an evidentiary link between CTAs and specific sources to support criminal investigations and prosecutions. In a previous study, anionic impurity profiles developed using high performance ion chromatography (HPIC) were demonstrated as CAS for matching samples from eight potassium cyanide (KCN) stocks to their reported countries of origin. Herein, a larger number of solid KCN stocks (n = 13) and, for the first time, solid sodium cyanide (NaCN) stocks (n = 15) were examined to determine what additional sourcing information can be obtained through anion, carbon stable isotope, and elemental analyses of cyanide stocks by HPIC, isotope ratio mass spectrometry (IRMS), and inductively coupled plasma optical emission spectroscopy (ICP-OES), respectively. The HPIC anion data was evaluated using the variable selection methods of Fisher-ratio (F-ratio), interval partial least squares (iPLS), and genetic algorithm-based partial least squares (GAPLS) and the classification methods of partial least squares discriminate analysis (PLSDA), K nearest neighbors (KNN), and support vector machines discriminate analysis (SVMDA). In summary, hierarchical cluster analysis (HCA) of anion impurity profiles from multiple cyanide stocks from six reported country of origins resulted in cyanide samples clustering into three groups: Czech Republic, Germany, and United States, independent of the associated alkali metal (K or Na). The three country groups were independently corroborated by HCA of cyanide elemental profiles and corresponded to countries with known solid cyanide factories. Both the anion and elemental CAS are believed to originate from the aqueous alkali hydroxides used in cyanide manufacture. Carbon stable isotope measurements resulted in two clusters: Germany and United States (the single Czech stock grouped with United States stocks). The carbon isotope CAS is believed to

  13. Developing methodologies for source attribution. Glass phase separation in Trinitite using NF{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Koeman, Elizabeth C.; Simonetti, Antonio [Notre Dame Univ., IN (United States). Dept. of Civil and Environmental Engineering and Earth Sciences; McNamara, Bruce K.; Smith, Frances N. [Pacific Northwest National Laboratory, Richland, WA (United States). Nuclear Chemistry and Engineering; Burns, Peter C. [Notre Dame Univ., IN (United States). Dept. of Civil and Environmental Engineering and Earth Sciences; Notre Dame Univ., IN (United States). Dept. of Chemistry and Biochemistry

    2017-08-01

    separation of silica from minerals (i.e. naturally occurring crystalline materials) and glasses (i.e. amorphous materials), leaving behind non-volatile fluorinated species and refractory phases. The results from our investigation clearly indicate that the NF{sub 3} treatment of nuclear materials is a technique that provides effective separation of bomb components from complex matrices (e.g. post-detonation samples), which will aid with rapid and accurate source attribution.

  14. Preliminary design of GDT-based 14 MeV neutron source

    International Nuclear Information System (INIS)

    Du Hongfei; Chen Dehong; Wang Hui; Wang Fuqiong; Jiang Jieqiong; Wu Yican; Chen Yiping

    2012-01-01

    To meet the need of D-T fusion neutron source for fusion material testing, design goals were presented in this paper according to the international requirements of neutron source for fusion material testing. A preliminary design scheme of GDT-based 14 MeV neutron source was proposed, and a physics model of the neutron source was built based on progress of GDT experiments. Two preliminary design schemes (i. e. FDS-GDT1, FDS-GDT2) were designed; among which FDS-GDT2 can be used for fusion material testing with neutron first wall loading of 2 MW/m 2 . (authors)

  15. Comparison of cluster-based and source-attribution methods for estimating transmission risk using large HIV sequence databases.

    Science.gov (United States)

    Le Vu, Stéphane; Ratmann, Oliver; Delpech, Valerie; Brown, Alison E; Gill, O Noel; Tostevin, Anna; Fraser, Christophe; Volz, Erik M

    2018-06-01

    Phylogenetic clustering of HIV sequences from a random sample of patients can reveal epidemiological transmission patterns, but interpretation is hampered by limited theoretical support and statistical properties of clustering analysis remain poorly understood. Alternatively, source attribution methods allow fitting of HIV transmission models and thereby quantify aspects of disease transmission. A simulation study was conducted to assess error rates of clustering methods for detecting transmission risk factors. We modeled HIV epidemics among men having sex with men and generated phylogenies comparable to those that can be obtained from HIV surveillance data in the UK. Clustering and source attribution approaches were applied to evaluate their ability to identify patient attributes as transmission risk factors. We find that commonly used methods show a misleading association between cluster size or odds of clustering and covariates that are correlated with time since infection, regardless of their influence on transmission. Clustering methods usually have higher error rates and lower sensitivity than source attribution method for identifying transmission risk factors. But neither methods provide robust estimates of transmission risk ratios. Source attribution method can alleviate drawbacks from phylogenetic clustering but formal population genetic modeling may be required to estimate quantitative transmission risk factors. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  16. Assessing the Differences in Public Health Impact of Salmonella Subtypes Using a Bayesian Microbial Subtyping Approach for Source Attribution

    DEFF Research Database (Denmark)

    Pires, Sara Monteiro; Hald, Tine

    2010-01-01

    Salmonella is a major cause of human gastroenteritis worldwide. To prioritize interventions and assess the effectiveness of efforts to reduce illness, it is important to attribute salmonellosis to the responsible sources. Studies have suggested that some Salmonella subtypes have a higher health...... impact than others. Likewise, some food sources appear to have a higher impact than others. Knowledge of variability in the impact of subtypes and sources may provide valuable added information for research, risk management, and public health strategies. We developed a Bayesian model that attributes...... illness to specific sources and allows for a better estimation of the differences in the ability of Salmonella subtypes and food types to result in reported salmonellosis. The model accommodates data for multiple years and is based on the Danish Salmonella surveillance. The number of sporadic cases caused...

  17. Preliminary thermal analysis of grids for twin source extraction system

    International Nuclear Information System (INIS)

    Pandey, Ravi; Bandyopadhyay, Mainak; Chakraborty, Arun K.

    2017-01-01

    The TWIN (Two driver based Indigenously built Negative ion source) source provides a bridge between the operational single driver based negative ion source test facility, ROBIN in IPR and an ITER-type multi driver based ion source. The source is designed to be operated in CW mode with 180kW, 1MHz, 5s ON/600s OFF duty cycle and also in 5Hz modulation mode with 3s ON/20s OFF duty cycle for 3 such cycle. TWIN source comprises of ion source sub-assembly (consist of driver and plasma box) and extraction system sub-assembly. Extraction system consists of Plasma grid (PG), extraction grid (EG) and Ground grid (GG) sub assembly. Negative ion beams produced at plasma grid seeing the plasma side of ion source will receive moderate heat flux whereas the extraction grid and ground grid would be receiving majority of heat flux from extracted negative ion and co-extracted electron beams. Entire Co-extracted electron beam would be dumped at extraction grid via electron deflection magnetic field making the requirement of thermal and hydraulic design for extraction grid to be critical. All the three grids are made of OFHC Copper and would be actively water cooled keeping the peak temperature rise of grid surface within allowable limit with optimum uniformity. All the grids are to be made by vacuum brazing process where joint strength becomes crucial at elevated temperature. Hydraulic design must maintain the peak temperature at the brazing joint within acceptable limit

  18. Assessing the Applicability of Currently Available Methods for Attributing Foodborne Disease to Sources, Including Food and Food Commodities

    DEFF Research Database (Denmark)

    Pires, Sara Monteiro

    2013-01-01

    on the public health question being addressed, on the data requirements, on advantages and limitations of the method, and on the data availability of the country or region in question. Previous articles have described available methods for source attribution, but have focused only on foodborne microbiological...

  19. Preliminary data summary for the hospitals point-source category

    International Nuclear Information System (INIS)

    Strassler, E.; Hund, F.H.

    1989-09-01

    The summaries were prepared in order to allow EPA to respond to the mandate of Section 304(m) of the Clean Water Act. Summaries for categories already subject to rulemaking were developed for comparison purposes, and contain only the minimum amount of data needed to provide some perspective on the relative magnitude of the pollution problems created across the categories. The document summarizes the most current information available regarding the discharge of wastewater and solid wastes containing priority and hazardous non-priority pollutants by hospitals. The document provides a technical basis for determining whether additional national regulations should be developed pursuant to the Clean Water Act (CWA), and makes available preliminary information regarding the discharge of priority and hazardous non-priority pollutants by the hospital industry

  20. Source attribution of Arctic black carbon constrained by aircraft and surface measurements

    Directory of Open Access Journals (Sweden)

    J.-W. Xu

    2017-10-01

    Full Text Available Black carbon (BC contributes to Arctic warming, yet sources of Arctic BC and their geographic contributions remain uncertain. We interpret a series of recent airborne (NETCARE 2015; PAMARCMiP 2009 and 2011 campaigns and ground-based measurements (at Alert, Barrow and Ny-Ålesund from multiple methods (thermal, laser incandescence and light absorption with the GEOS-Chem global chemical transport model and its adjoint to attribute the sources of Arctic BC. This is the first comparison with a chemical transport model of refractory BC (rBC measurements at Alert. The springtime airborne measurements performed by the NETCARE campaign in 2015 and the PAMARCMiP campaigns in 2009 and 2011 offer BC vertical profiles extending to above 6 km across the Arctic and include profiles above Arctic ground monitoring stations. Our simulations with the addition of seasonally varying domestic heating and of gas flaring emissions are consistent with ground-based measurements of BC concentrations at Alert and Barrow in winter and spring (rRMSE  < 13 % and with airborne measurements of the BC vertical profile across the Arctic (rRMSE  = 17 % except for an underestimation in the middle troposphere (500–700 hPa.Sensitivity simulations suggest that anthropogenic emissions in eastern and southern Asia have the largest effect on the Arctic BC column burden both in spring (56 % and annually (37 %, with the largest contribution in the middle troposphere (400–700 hPa. Anthropogenic emissions from northern Asia contribute considerable BC (27 % in spring and 43 % annually to the lower troposphere (below 900 hPa. Biomass burning contributes 20 % to the Arctic BC column annually.At the Arctic surface, anthropogenic emissions from northern Asia (40–45 % and eastern and southern Asia (20–40 % are the largest BC contributors in winter and spring, followed by Europe (16–36 %. Biomass burning from North America is the most important

  1. Source attribution of light-absorbing impurities in seasonal snow across northern China

    Science.gov (United States)

    Zhang, R.; Hegg, D. A.; Huang, J.; Fu, Q.

    2013-01-01

    Seasonal snow samples obtained at 46 sites in 6 provinces of China in January and February 2010 were analyzed for a suite of chemical species and these data are combined with previously determined concentrations of light-absorbing impurities (LAI), including all particles that absorb light in the 650-700 nm wavelength interval. The LAI, together with 14 other analytes, are used as input to a positive matrix factorization (PMF) receptor model to explore the sources of the LAI in the snow. The PMF analysis for the LAI sources is augmented with backward trajectory cluster analysis and the geographic locations of major source areas for the three source types. The two analyses are consistent and indicate that three factors/sources were responsible for the measured snow light absorption: a soil dust source, an industrial pollution source, and a biomass and biofuels burning source. Soil dust was the main source of the LAI, accounting for ~ 53% of the LAI on average.

  2. Source attribution of insoluble light-absorbing particles in seasonal snow across northern China

    Science.gov (United States)

    Zhang, R.; Hegg, D. A.; Huang, J.; Fu, Q.

    2013-06-01

    Seasonal snow samples obtained at 46 sites in 6 provinces of China in January and February 2010 were analyzed for a suite of chemical species and these data are combined with previously determined concentrations of insoluble light-absorbing particles (ILAP), including all particles that absorb light in the 650-700 nm wavelength interval. The ILAP, together with 14 other analytes, are used as input to a positive matrix factorization (PMF) receptor model to explore the sources of ILAP in the snow. The PMF analysis for ILAP sources is augmented with backward trajectory cluster analysis and the geographic locations of major source areas for the three source types. The two analyses are consistent and indicate that three factors/sources were responsible for the measured light absorption of snow: a soil dust source, an industrial pollution source, and a biomass and / or biofuel burning source. Soil dust was the main source of the ILAP, accounting for ~53% of ILAP on average.

  3. Is Causal Attribution of Sexual Deviance the Source of Thinking Errors?

    Science.gov (United States)

    Paulauskas, Roland

    2013-01-01

    Adult and juvenile offenders exhibit a number of cognitive distortions related to sexually offending behaviors. The latter may be attributed to their developmental deficiencies, the result of operant conditioning, psychological self-defense mechanisms and biases, influence of negative environmental factors or criminal subculture. A group of…

  4. Attribution of the French human Salmonellosis cases to the main food-sources according to the type of surveillance data.

    Science.gov (United States)

    David, J M; Sanders, P; Bemrah, N; Granier, S A; Denis, M; Weill, F-X; Guillemot, D; Watier, L

    2013-05-15

    Salmonella are the most common bacterial cause of foodborne infections in France and ubiquitous pathogens present in many animal productions. Assessing the relative contribution of the different food-animal sources to the burden of human cases is a key step towards the conception, prioritization and assessment of efficient control policy measures. For this purpose, we considered a Bayesian microbial subtyping attribution approach based on a previous published model (Hald et al., 2004). It requires quality integrated data on human cases and on the contamination of their food sources, per serotype and microbial subtype, which were retrieved from the French integrated surveillance system for Salmonella. The quality of the data available for such an approach is an issue for many countries in which the surveillance system has not been designed for this purpose. In France, the sources are monitored simultaneously by an active, regulation-based surveillance system that produces representative prevalence data (as ideally required for the approach) and a passive system relying on voluntary laboratories that produces data not meeting the standards set by Hald et al. (2004) but covering a broader range of sources. These data allowed us to study the impact of data quality on the attribution results, globally and focusing on specific features of the data (number of sources and contamination indicator). The microbial subtyping attribution model was run using an adapted parameterization previously proposed (David et al., 2012). A total of 9076 domestic sporadic cases were included in the analyses as well as 9 sources among which 5 were common to the active and the passive datasets. The greatest impact on the attribution results was observed for the number of sources. Thus, especially in the absence of data on imported products, the attribution estimates presented here should be considered with caution. The results were comparable for both types of surveillance, leading to the

  5. Development of a helicon ion source: Simulations and preliminary experiments

    Science.gov (United States)

    Afsharmanesh, M.; Habibi, M.

    2018-03-01

    In the present context, the extraction system of a helicon ion source has been simulated and constructed. Results of the ion source commissioning at up to 20 kV are presented as well as simulations of an ion beam extraction system. Argon current of more than 200 μA at up to 20 kV is extracted and is characterized with a Faraday cup and beam profile monitoring grid. By changing different ion source parameters such as RF power, extraction voltage, and working pressure, an ion beam with current distribution exhibiting a central core has been detected. Jump transition of ion beam current emerges at the RF power near to 700 W, which reveals that the helicon mode excitation has reached this power. Furthermore, measuring the emission line intensity of Ar ii at 434.8 nm is the other way we have used for demonstrating the mode transition from inductively coupled plasma to helicon. Due to asymmetrical longitudinal power absorption of a half-helix helicon antenna, it is used for the ion source development. The modeling of the plasma part of the ion source has been carried out using a code, HELIC. Simulations are carried out by taking into account a Gaussian radial plasma density profile and for plasma densities in range of 1018-1019 m-3. Power absorption spectrum and the excited helicon mode number are obtained. Longitudinal RF power absorption for two different antenna positions is compared. Our results indicate that positioning the antenna near to the plasma electrode is desirable for the ion beam extraction. The simulation of the extraction system was performed with the ion optical code IBSimu, making it the first helicon ion source extraction designed with the code. Ion beam emittance and Twiss parameters of the ellipse emittance are calculated at different iterations and mesh sizes, and the best values of the mesh size and iteration number have been obtained for the calculations. The simulated ion beam extraction system has been evaluated using optimized parameters such

  6. Preliminary investigation of processes that affect source term identification

    International Nuclear Information System (INIS)

    Wickliff, D.S.; Solomon, D.K.; Farrow, N.D.

    1991-09-01

    Solid Waste Storage Area (SWSA) 5 is known to be a significant source of contaminants, especially tritium ( 3 H), to the White Oak Creek (WOC) watershed. For example, Solomon et al. (1991) estimated the total 3 H discharge in Melton Branch (most of which originates in SWSA 5) for the 1988 water year to be 1210 Ci. A critical issue for making decisions concerning remedial actions at SWSA 5 is knowing whether the annual contaminant discharge is increasing or decreasing. Because (1) the magnitude of the annual contaminant discharge is highly correlated to the amount of annual precipitation (Solomon et al., 1991) and (2) a significant lag may exist between the time of peak contaminant release from primary sources (i.e., waste trenches) and the time of peak discharge into streams, short-term stream monitoring by itself is not sufficient for predicting future contaminant discharges. In this study we use 3 H to examine the link between contaminant release from primary waste sources and contaminant discharge into streams. By understanding and quantifying subsurface transport processes, realistic predictions of future contaminant discharge, along with an evaluation of the effectiveness of remedial action alternatives, will be possible. The objectives of this study are (1) to characterize the subsurface movement of contaminants (primarily 3 H) with an emphasis on the effects of matrix diffusion; (2) to determine the relative strength of primary vs secondary sources; and (3) to establish a methodology capable of determining whether the 3 H discharge from SWSA 5 to streams is increasing or decreasing

  7. Deaths Attributable to Diabetes in the United States: Comparison of Data Sources and Estimation Approaches.

    Science.gov (United States)

    Stokes, Andrew; Preston, Samuel H

    2017-01-01

    The goal of this research was to identify the fraction of deaths attributable to diabetes in the United States. We estimated population attributable fractions (PAF) for cohorts aged 30-84 who were surveyed in the National Health Interview Survey (NHIS) between 1997 and 2009 (N = 282,322) and in the National Health and Nutrition Examination Survey (NHANES) between 1999 and 2010 (N = 21,814). Cohort members were followed prospectively for mortality through 2011. We identified diabetes status using self-reported diagnoses in both NHIS and NHANES and using HbA1c in NHANES. Hazard ratios associated with diabetes were estimated using Cox model adjusted for age, sex, race/ethnicity, educational attainment, and smoking status. We found a high degree of consistency between data sets and definitions of diabetes in the hazard ratios, estimates of diabetes prevalence, and estimates of the proportion of deaths attributable to diabetes. The proportion of deaths attributable to diabetes was estimated to be 11.5% using self-reports in NHIS, 11.7% using self-reports in NHANES, and 11.8% using HbA1c in NHANES. Among the sub-groups that we examined, the PAF was highest among obese persons at 19.4%. The proportion of deaths in which diabetes was assigned as the underlying cause of death (3.3-3.7%) severely understated the contribution of diabetes to mortality in the United States. Diabetes may represent a more prominent factor in American mortality than is commonly appreciated, reinforcing the need for robust population-level interventions aimed at diabetes prevention and care.

  8. Deaths Attributable to Diabetes in the United States: Comparison of Data Sources and Estimation Approaches.

    Directory of Open Access Journals (Sweden)

    Andrew Stokes

    Full Text Available The goal of this research was to identify the fraction of deaths attributable to diabetes in the United States.We estimated population attributable fractions (PAF for cohorts aged 30-84 who were surveyed in the National Health Interview Survey (NHIS between 1997 and 2009 (N = 282,322 and in the National Health and Nutrition Examination Survey (NHANES between 1999 and 2010 (N = 21,814. Cohort members were followed prospectively for mortality through 2011. We identified diabetes status using self-reported diagnoses in both NHIS and NHANES and using HbA1c in NHANES. Hazard ratios associated with diabetes were estimated using Cox model adjusted for age, sex, race/ethnicity, educational attainment, and smoking status.We found a high degree of consistency between data sets and definitions of diabetes in the hazard ratios, estimates of diabetes prevalence, and estimates of the proportion of deaths attributable to diabetes. The proportion of deaths attributable to diabetes was estimated to be 11.5% using self-reports in NHIS, 11.7% using self-reports in NHANES, and 11.8% using HbA1c in NHANES. Among the sub-groups that we examined, the PAF was highest among obese persons at 19.4%. The proportion of deaths in which diabetes was assigned as the underlying cause of death (3.3-3.7% severely understated the contribution of diabetes to mortality in the United States.Diabetes may represent a more prominent factor in American mortality than is commonly appreciated, reinforcing the need for robust population-level interventions aimed at diabetes prevention and care.

  9. Source attribution of insoluble light-absorbing particles in seasonal snow across northern China

    Directory of Open Access Journals (Sweden)

    R. Zhang

    2013-06-01

    Full Text Available Seasonal snow samples obtained at 46 sites in 6 provinces of China in January and February 2010 were analyzed for a suite of chemical species and these data are combined with previously determined concentrations of insoluble light-absorbing particles (ILAP, including all particles that absorb light in the 650–700 nm wavelength interval. The ILAP, together with 14 other analytes, are used as input to a positive matrix factorization (PMF receptor model to explore the sources of ILAP in the snow. The PMF analysis for ILAP sources is augmented with backward trajectory cluster analysis and the geographic locations of major source areas for the three source types. The two analyses are consistent and indicate that three factors/sources were responsible for the measured light absorption of snow: a soil dust source, an industrial pollution source, and a biomass and / or biofuel burning source. Soil dust was the main source of the ILAP, accounting for ~53% of ILAP on average.

  10. Preliminary studies of Brazilian wood using different radioisotopic sources

    International Nuclear Information System (INIS)

    Carvalho, Gilberto; Silva, Leonardo Gondim de Andrade e

    2013-01-01

    Due to availability and particular features, wood was one of the first materials used by mankind with a wide variety of applications. It can be used as raw material for paper and cellulose manufacturing; in industries such as chemical, naval, furniture, sports goods, toys, and musical instrument; in building construction and in the distribution of electric energy. Wood has been widely researched; therefore, wood researchers know that several aspects such as temperature, latitude, longitude, altitude, sunlight, soil, and rainfall index interfere with the growth of trees. This behavior explains why average physical-chemical properties are important when wood is studied. The majority of researchers consider density to be the most important wood property because of its straight relationship with the physical and mechanical properties of wood. There are three types of wood density: basic, apparent and green. The apparent density was used here at 12% of moisture content. In this study, four different types of wood were used: 'freijo', 'jequetiba', 'muiracatiara' and 'ipe'. For wood density determination by non-conventional method, Am-241, Ba-133 and Cs-137 radioisotopic sources; a NaI scintillation detector and a counter were used. The results demonstrated this technique to be quick and accurate. By considering the nuclear parameters obtained as half value layers and linear absorption coefficients, Cs-137 radioisotopic source demonstrated to be the best option to be used for inspection of the physical integrity of electric wooden poles and live trees for future works. (author)

  11. Source Attributions and Persuasion: Perceived Honesty as a Determinant of Message Scrutiny.

    Science.gov (United States)

    Priester, Joseph R.; Petty, Richard E.

    1995-01-01

    Examined hypothesis that cognitive misers (CM)--individuals low in the need for cognition--forego effortful message scrutiny with a presumably truthful communicator. Results showed that CMs depended more on message scrutiny when a knowledgeable source is of questionable honesty than when the source's honesty is clear. Other factors are discussed.…

  12. Risk Factors for Campylobacteriosis of Chicken, Ruminant, and Environmental Origin: A Combined Case-Control and Source Attribution Analysis

    Science.gov (United States)

    Wagenaar, Jaap A.; de Boer, Albert G.; Havelaar, Arie H.; Friesema, Ingrid H. M.; French, Nigel P.; Busani, Luca; van Pelt, Wilfrid

    2012-01-01

    campylobacteriosis are investigated in relation to the attributed reservoirs based on MLST profiles. Combining epidemiological and source attribution data improved campylobacteriosis risk factor identification and characterization, generated hypotheses, and showed that genotype-based source attribution is epidemiologically sensible. PMID:22880049

  13. Risk factors for campylobacteriosis of chicken, ruminant, and environmental origin: a combined case-control and source attribution analysis.

    Directory of Open Access Journals (Sweden)

    Lapo Mughini Gras

    factors for campylobacteriosis are investigated in relation to the attributed reservoirs based on MLST profiles. Combining epidemiological and source attribution data improved campylobacteriosis risk factor identification and characterization, generated hypotheses, and showed that genotype-based source attribution is epidemiologically sensible.

  14. Preliminary studies of Brazilian wood using different radioisotopic sources

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Gilberto; Silva, Leonardo Gondim de Andrade e, E-mail: gcarval@ipen.br, E-mail: ftgasilva@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Due to availability and particular features, wood was one of the first materials used by mankind with a wide variety of applications. It can be used as raw material for paper and cellulose manufacturing; in industries such as chemical, naval, furniture, sports goods, toys, and musical instrument; in building construction and in the distribution of electric energy. Wood has been widely researched; therefore, wood researchers know that several aspects such as temperature, latitude, longitude, altitude, sunlight, soil, and rainfall index interfere with the growth of trees. This behavior explains why average physical-chemical properties are important when wood is studied. The majority of researchers consider density to be the most important wood property because of its straight relationship with the physical and mechanical properties of wood. There are three types of wood density: basic, apparent and green. The apparent density was used here at 12% of moisture content. In this study, four different types of wood were used: 'freijo', 'jequetiba', 'muiracatiara' and 'ipe'. For wood density determination by non-conventional method, Am-241, Ba-133 and Cs-137 radioisotopic sources; a NaI scintillation detector and a counter were used. The results demonstrated this technique to be quick and accurate. By considering the nuclear parameters obtained as half value layers and linear absorption coefficients, Cs-137 radioisotopic source demonstrated to be the best option to be used for inspection of the physical integrity of electric wooden poles and live trees for future works. (author)

  15. Monte Carlo simulation of a TRIGA source driven core configuration: Preliminary results

    International Nuclear Information System (INIS)

    Burgio, N.; Ciavola, C.; Santagata, A.

    2002-01-01

    The different core configurations with a k eff ranging from 0.93 to 0.98, and their response when driven by a pulsed neutron source were simulated with MCNP4C3 (Los Alamos - Monte Carlo N Particles). Simulation results could be considered both as preliminary check for nuclear data and a conceptual design for 'source jerk' experiments on the frame of TRIGA Accelerator Driven Experiment (TRADE) on the reactor facility of Casaccia research center. (author)

  16. Attributing Methane and Carbon Dioxide Emissions from Anthropogenic and Natural Sources Using AVIRIS-NG

    Science.gov (United States)

    Thorpe, A. K.; Frankenberg, C.; Thompson, D. R.; Duren, R. M.; Aubrey, A. D.; Bue, B. D.; Green, R. O.; Gerilowski, K.; Krings, T.; Borchardt, J.; Kort, E. A.; Sweeney, C.; Conley, S. A.; Roberts, D. A.; Dennison, P. E.; Ayasse, A.

    2016-12-01

    Imaging spectrometers like the next generation Airborne Visible/Infrared Imaging Spectrometer (AVIRIS-NG) can map large regions with the high spatial resolution necessary to resolve methane (CH4) and carbon dioxide (CO2) emissions. This capability is aided by real time detection and geolocation of gas plumes, permitting unambiguous identification of individual emission source locations and communication to ground teams for rapid follow up. We present results from AVIRIS-NG flight campaigns in the Four Corners region (Colorado and New Mexico) and the San Joaquin Valley (California). Over three hundred plumes were observed, reflecting emissions from anthropogenic and natural sources. Examples of plumes will be shown for a number of sources, including CH4 from well completions, gas processing plants, tanks, pipeline leaks, natural seeps, and CO2 from power plants. Despite these promising results, an imaging spectrometer built exclusively for quantitative mapping of gas plumes would have improved sensitivity compared to AVIRIS-NG. For example, an instrument providing a 1 nm spectral sampling (2,000-2,400 micron) would permit mapping CH4, CO2, H2O, CO, and N2O from more diffuse sources using both airborne and orbital platforms. The ability to identify emission sources offers the potential to constrain regional greenhouse gas budgets and improve partitioning between anthropogenic and natural emission sources. Because the CH4 lifetime is only about 9 years and CH4 has a Global Warming Potential 86 times that of CO2 for a 20 year time interval, mitigating these emissions is a particularly cost-effective approach to reduce overall atmospheric radiative forcing. Fig. 1. True color image subset with superimposed gas plumes showing concentrations in ppmm. Left: AVIRIS-NG observed CH4 plumes from natural gas processing plant extending over 500 m downwind of multiple emissions sources. Right: Multiple CO2 plumes observed from coal-fired power plant.

  17. Psychological restoration can depend on stimulus-source attribution: A challenge for the evolutionary account?

    Directory of Open Access Journals (Sweden)

    Andreas Haga

    2016-11-01

    Full Text Available Visiting or viewing nature environments can have restorative psychological effects, while exposure to the built environment typically has less positive effects. A classic view is that this difference in restorative potential of nature and built environments depends on differences in the intrinsic characteristics of the stimuli. In addition, an evolutionary account is often assumed whereby restoration is believed to be a hardwired response to nature’s stimulus-features. Here, we propose the novel hypothesis that the restorative effects of a stimulus do not entirely depend on the stimulus-features per se, but also on the meaning that people assign to the stimulus. Participants conducted cognitively demanding tests prior to and after a brief pause. During the pause, the participants were exposed to an ambiguous sound consisting of pink noise with white noise interspersed. Participants in the nature sound-source condition were told that the sound originated from a nature scene with a waterfall; participants in the industrial sound-source condition were told that the sound originated from an industrial environment with machinery; and participants in the control condition were told nothing about the sound origin. Self-reported mental exhaustion showed that participants in the nature sound-source condition were more psychologically restored after the pause than participants in the industrial sound-source condition. One potential interpretation of the results is that restoration from nature experiences depends on learned, positive associations with nature; not only on hardwired responses shaped by evolution.

  18. Attributing the human disease burden of foodborne infections to specific sources.

    NARCIS (Netherlands)

    Pires, S.M.; Evers, E.G.; van Pelt, W.; Ayers, T.; Scallan, E.; Angulo, F.J.; Havelaar, A.H.; Hald, T.

    2009-01-01

    Foodborne diseases are an important cause of human illness worldwide. Humans acquire these infections from a variety of sources and routes of transmission. Many efforts have been made in the last decades to prevent and control foodborne diseases, particularly foodborne zoonoses. However, information

  19. Premature Deaths Attributed to Source-Specific BC Emissions in Six Urban US Regions

    Czech Academy of Sciences Publication Activity Database

    Turner, M.D.; Henze, D.K.; Capps, S.; Hakami, A.; Zhao, S.; Resler, Jaroslav; Carmichael, G.; Stanier, C.; Baek, J.; Sandu, A.; Russell, A.G.; Nenes, A.; Pinder, R.; Napelenok, S.; Bash, J.; Percell, P.; Chai, T.

    2015-01-01

    Roč. 10, č. 11 (2015), Article 114014 ISSN 1748-9326 Grant - others:NASA Applied Sciences Program(US) NNX09AN77G Institutional support: RVO:67985807 Keywords : air quality * health impact * source apportionment * adjoint * particulate matter * black car bon Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 4.134, year: 2015

  20. Attributing the Human Disease Burden of Foodborne Infections to Specific Sources

    DEFF Research Database (Denmark)

    Pires, Sara Monteiro; Evers, Eric E.; Van Pely, Wilfrid

    2009-01-01

    Foodborne diseases are an important cause of human illness worldwide. Humans acquire these infections from a variety of sources and routes of transmission. Many efforts have been made in the last decades to prevent and control foodborne diseases, particularly foodborne zoonoses. However...

  1. Premature Deaths Attributed to Source-Specific BC Emissions in Six Urban US Regions

    Czech Academy of Sciences Publication Activity Database

    Turner, M.D.; Henze, D.K.; Capps, S.; Hakami, A.; Zhao, S.; Resler, Jaroslav; Carmichael, G.; Stanier, C.; Baek, J.; Sandu, A.; Russell, A.G.; Nenes, A.; Pinder, R.; Napelenok, S.; Bash, J.; Percell, P.; Chai, T.

    2015-01-01

    Roč. 10, č. 11 (2015), Article 114014 ISSN 1748-9326 Grant - others: NASA Applied Sciences Program(US) NNX09AN77G Institutional support: RVO:67985807 Keywords : air quality * health impact * source apportionment * adjoint * particulate matter * black carbon Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 4.134, year: 2015

  2. Spatiotemporal patterns and source attribution of nitrogen pollution in a typical headwater agricultural watershed in Southeastern China.

    Science.gov (United States)

    Chen, Wenjun; He, Bin; Nover, Daniel; Duan, Weili; Luo, Chuan; Zhao, Kaiyan; Chen, Wen

    2018-01-01

    Excessive nitrogen (N) discharge from agriculture causes widespread problems in aquatic ecosystems. Knowledge of spatiotemporal patterns and source attribution of N pollution is critical for nutrient management programs but is poorly studied in headwaters with various small water bodies and mini-point pollution sources. Taking a typical small watershed in the low mountains of Southeastern China as an example, N pollution and source attribution were studied for a multipond system around a village using the Hydrological Simulation Program-Fortran (HSPF) model. The results exhibited distinctive spatio-seasonal variations with an overall seriousness rank for the three indicators: total nitrogen (TN) > nitrate/nitrite nitrogen (NO x - -N) > ammonia nitrogen (NH 3 -N), according to the Chinese Surface Water Quality Standard. TN pollution was severe for the entire watershed, while NO x - -N pollution was significant for ponds and ditches far from the village, and the NH 3 -N concentrations were acceptable except for the ponds near the village in summer. Although food and cash crop production accounted for the largest source of N loads, we discovered that mini-point pollution sources, including animal feeding operations, rural residential sewage, and waste, together contributed as high as 47% of the TN and NH 3 -N loads in ponds and ditches. So, apart from eco-fertilizer programs and concentrated animal feeding operations, the importance of environmental awareness building for resource management is highlighted for small farmers in headwater agricultural watersheds. As a first attempt to incorporate multipond systems into the process-based modeling of nonpoint source (NPS) pollution, this work can inform other hydro-environmental studies on scattered and small water bodies. The results are also useful to water quality improvement for entire river basins.

  3. Source attribution of Bornean air masses by back trajectory analysis during the OP3 project

    Directory of Open Access Journals (Sweden)

    N. H. Robinson

    2011-09-01

    Full Text Available Atmospheric composition affects the radiative balance of the Earth through the creation of greenhouse gases and the formation of aerosols. The latter interact with incoming solar radiation, both directly and indirectly through their effects on cloud formation and lifetime. The tropics have a major influence on incoming sunlight however the tropical atmosphere is poorly characterised, especially outside Amazonia. The origins of air masses influencing a measurement site in a protected rainforest in Borneo, South East Asia, were assessed and the likely sources of a range of trace gases and particles were determined. This was conducted by interpreting in situ measurements made at the site in the context of ECMWF backwards air mass trajectories. Two different but complementary methods were employed to interpret the data: comparison of periods classified by cluster analysis of trajectories, and inspection of the dependence of mean measured values on geographical history of trajectories. Sources of aerosol particles, carbon monoxide and halocarbons were assessed. The likely source influences include: terrestrial organic biogenic emissions; long range transport of anthropogenic emissions; biomass burning; sulphurous emissions from marine phytoplankton, with a possible contribution from volcanoes; marine production of inorganic mineral aerosol; and marine production of halocarbons. Aerosol sub- and super-saturated water affinity was found to be dependent on source (and therefore composition, with more hygroscopic aerosol and higher numbers of cloud condensation nuclei measured in air masses of marine origin. The prevailing sector during the majority of measurements was south-easterly, which is from the direction of the coast closest to the site, with a significant influence inland from the south-west. This analysis shows that marine and terrestrial air masses have different dominant chemical sources. Comparison with the AMAZE-08 project in the Amazon

  4. Point source attribution of ambient contamination events near unconventional oil and gas development.

    Science.gov (United States)

    Hildenbrand, Zacariah L; Mach, Phillip M; McBride, Ethan M; Dorreyatim, M Navid; Taylor, Josh T; Carlton, Doug D; Meik, Jesse M; Fontenot, Brian E; Wright, Kenneth C; Schug, Kevin A; Verbeck, Guido F

    2016-12-15

    We present an analysis of ambient benzene, toluene, and xylene isomers in the Eagle Ford shale region of southern Texas. In situ air quality measurements using membrane inlet mobile mass spectrometry revealed ambient benzene and toluene concentrations as high as 1000 and 5000 parts-per-billion, respectively, originating from specific sub-processes on unconventional oil and gas well pad sites. The detection of highly variant contamination events attributable to natural gas flaring units, condensate tanks, compressor units, and hydrogen sulfide scavengers indicates that mechanical inefficiencies, and not necessarily the inherent nature of the extraction process as a whole, result in the release of these compounds into the environment. This awareness of ongoing contamination events contributes to an enhanced knowledge of ambient volatile organic compounds on a regional scale. While these reconnaissance measurements on their own do not fully characterize the fluctuations of ambient BTEX concentrations that likely exist in the atmosphere of the Eagle Ford Shale region, they do suggest that contamination events from unconventional oil and gas development can be monitored, controlled, and reduced. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Using temporal sampling to improve attribution of source populations for invasive species.

    Directory of Open Access Journals (Sweden)

    Sharyn J Goldstien

    Full Text Available Numerous studies have applied genetic tools to the identification of source populations and transport pathways for invasive species. However, there are many gaps in the knowledge obtained from such studies because comprehensive and meaningful spatial sampling to meet these goals is difficult to achieve. Sampling populations as they arrive at the border should fill the gaps in source population identification, but such an advance has not yet been achieved with genetic data. Here we use previously acquired genetic data to assign new incursions as they invade populations within New Zealand ports and marinas. We also investigated allelelic frequency change in these recently established populations over a two-year period, and assessed the effect of temporal genetic sampling on our ability to assign new incursions to their population of source. We observed shifts in the allele frequencies among populations, as well as the complete loss of some alleles and the addition of alleles novel to New Zealand, within these recently established populations. There was no significant level of genetic differentiation observed in our samples between years, and the use of these temporal data did alter the assignment probability of new incursions. Our study further suggests that new incursions can add genetic variation to the population in a single introduction event as the founders themselves are often more genetically diverse than theory initially predicted.

  6. Some preliminary design considerations for the ANS [Advanced Neutron Source] reactor cold source

    International Nuclear Information System (INIS)

    Henderson, D.L.

    1988-01-01

    Two areas concerned with the design of the Advanced Neutron Source (ANS) cold source have been investigated by simple one-dimensional calculations. The gain factors computed for a possible liquid nitrogen-15 cold source moderator are considerably below those computed for the much colder liquid deuterium moderator, as is reasonable considering the difference in moderator temperature. Nevertheless, nitrogen-15 does represent a viable option should safety related issues prohibit the use of deuterium as a moderating material. The slab geometry calculations have indicated that reflection of neutrons may be the dominant moderating mechanism and should be a consideration in the design of the cold source. 9 refs., 2 figs

  7. The effects of a novel psychological attribution and emotional awareness and expression therapy for chronic musculoskeletal pain: A preliminary, uncontrolled trial.

    Science.gov (United States)

    Burger, Amanda J; Lumley, Mark A; Carty, Jennifer N; Latsch, Deborah V; Thakur, Elyse R; Hyde-Nolan, Maren E; Hijazi, Alaa M; Schubiner, Howard

    2016-02-01

    Current psychological and behavioral therapies for chronic musculoskeletal pain only modestly reduce pain, disability, and distress. These limited effects may be due to the failure of current therapies: a) to help patients learn that their pain is influenced primarily by central nervous system psychological processes; and b) to enhance awareness and expression of emotions related to psychological trauma or conflict. We developed and conducted a preliminary, uncontrolled test of a novel psychological attribution and emotional awareness and expression therapy that involves an initial individual consultation followed by 4 group sessions. A series of 72 patients with chronic musculoskeletal pain had the intervention and were assessed at baseline, post-treatment, and 6-month follow-up. Participation and satisfaction were high and attrition was low. Intent-to-treat analyses found significant improvements in hypothesized change processes: psychological attributions for pain, emotional awareness, emotional approach coping, and alexithymia. Pain, interference, depression, and distress showed large effect size improvements at post-treatment, which were maintained or even enhanced at 6 months. Approximately two-thirds of the patients improved at least 30% in pain and other outcomes, and one-third of the patients improved 70%. Changes in attribution and emotional processes predicted outcomes. Higher baseline depressive symptoms predicted greater improvements, and outcomes were comparable for patients with widespread vs. localized pain. This novel intervention may lead to greater benefits than available psychological interventions for patients with chronic musculoskeletal pain, but needs controlled testing. Copyright © 2015 Elsevier Inc. All rights reserved.

  8. Elemental source attribution signatures for calcium ammonium nitrate (CAN) fertilizers used in homemade explosives

    Energy Technology Data Exchange (ETDEWEB)

    Fraga, Carlos G.; Mitroshkov, Alexander V.; Mirjankar, Nikhil S.; Dockendorff, Brian P.; Melville, Angie M.

    2017-11-01

    Calcium ammonium nitrate (CAN) is a widely available fertilizer composed of ammonium nitrate mixed with some form of calcium carbonate such as limestone or dolomite. CAN is also frequently used to make homemade explosives. The potential of using elemental profiling and chemometrics to match both pristine and reprocessed CAN fertilizers to their factories for use in future forensic investigations was examined. Inductively coupled plasma-mass spectrometry (ICP-MS) analysis was performed on 64 elements in 125 samples from 11 CAN stocks from 6 different CAN factories. Fisher ratio, degree-of-class-separation, and partial least squares discriminant analysis (PLSDA) were used to develop a model using the concentrations of Na, V, Mn, Cu, Ga, Sr, Ba and U to classify a validation set of CAN samples into 5 factory groups; one group was two factories from the same fertilizer company. In terms of the pristine CAN samples, i.e., unadulterated prills, 64% of the test samples were matched to their correct factory group with zero false positives. The same PLSDA model was used to correctly match 100% of the CAN samples that were reprocessed by crushing and mixing the CAN with powdered sugar. In the case of crushed CAN samples mixed with aluminum powder, correct matches were made for zero to 100% of the samples depending on the factory the CAN originated. Remarkably, for one factory, 100% of the ammonium nitrate samples that were extracted from CAN using tap or bottled water were matched to the correct CAN factory group. Lastly, the water-insoluble (calcium carbonate) portions of CAN provided a greater degree of discrimination between factories than the water-soluble portions of CAN. In summary, this work illustrates that sourcing unadulterated CAN fertilizer can potentially be done with high frequency and high confidence using elemental profiling and chemometrics while the sourcing of reprocessed CAN is dependent on how much an adulterant alters the recovered elemental profile of

  9. Coupling meteorology, metal concentrations, and Pb isotopes for source attribution in archived precipitation samples.

    Science.gov (United States)

    Graney, Joseph R; Landis, Matthew S

    2013-03-15

    A technique that couples lead (Pb) isotopes and multi-element concentrations with meteorological analysis was used to assess source contributions to precipitation samples at the Bondville, Illinois USA National Trends Network (NTN) site. Precipitation samples collected over a 16month period (July 1994-October 1995) at Bondville were parsed into six unique meteorological flow regimes using a minimum variance clustering technique on back trajectory endpoints. Pb isotope ratios and multi-element concentrations were measured using high resolution inductively coupled plasma-sector field mass spectrometry (ICP-SFMS) on the archived precipitation samples. Bondville is located in central Illinois, ~250km downwind from smelters in southeast Missouri. The Mississippi Valley Type ore deposits in Missouri provided a unique multi-element and Pb isotope fingerprint for smelter emissions which could be contrasted to industrial emissions from the Chicago and Indianapolis urban areas (~125km north and east, of Bondville respectively) and regional emissions from electric utility facilities. Differences in Pb isotopes and element concentrations in precipitation corresponded to flow regime. Industrial sources from urban areas, and thorogenic Pb from coal use, could be differentiated from smelter emissions from Missouri by coupling Pb isotopes with variations in element ratios and relative mass factors. Using a three endmember mixing model based on Pb isotope ratio differences, industrial processes in urban airsheds contributed 56±19%, smelters in southeast Missouri 26±13%, and coal combustion 18±7%, of the Pb in precipitation collected in Bondville in the mid-1990s. Copyright © 2012 Elsevier B.V. All rights reserved.

  10. Atmospheric nitrogen deposition in the Yangtze River basin: Spatial pattern and source attribution

    International Nuclear Information System (INIS)

    Xu, Wen; Zhao, Yuanhong; Liu, Xuejun; Dore, Anthony J.; Zhang, Lin; Liu, Lei; Cheng, Miaomiao

    2018-01-01

    The Yangtze River basin is one of the world's hotspots for nitrogen (N) deposition and likely plays an important role in China's riverine N output. Here we constructed a basin-scale total dissolved inorganic N (DIN) deposition (bulk plus dry) pattern based on published data at 100 observational sites between 2000 and 2014, and assessed the relative contributions of different reactive N (N r ) emission sectors to total DIN deposition using the GEOS-Chem model. Our results show a significant spatial variation in total DIN deposition across the Yangtze River basin (33.2 kg N ha −1 yr −1 on average), with the highest fluxes occurring mainly in the central basin (e.g., Sichuan, Hubei and Hunan provinces, and Chongqing municipality). This indicates that controlling N deposition should build on mitigation strategies according to local conditions, namely, implementation of stricter control of N r emissions in N deposition hotspots but moderate control in the areas with low N deposition levels. Total DIN deposition in approximately 82% of the basin area exceeded the critical load of N deposition for semi-natural ecosystems along the basin. On the basin scale, the dominant source of DIN deposition is fertilizer use (40%) relative to livestock (11%), industry (13%), power plant (9%), transportation (9%), and others (18%, which is the sum of contributions from human waste, residential activities, soil, lighting and biomass burning), suggesting that reducing NH 3 emissions from improper fertilizer (including chemical and organic fertilizer) application should be a priority in curbing N deposition. This, together with distinct spatial variations in emission sector contributions to total DIN deposition also suggest that, in addition to fertilizer, major emission sectors in different regions of the basin should be considered when developing synergistic control measures. - Highlights: • Total DIN deposition fluxes showed a significant spatial variation in the

  11. Atmospheric nitrogen deposition in the Yangtze River basin: Spatial pattern and source attribution.

    Science.gov (United States)

    Xu, Wen; Zhao, Yuanhong; Liu, Xuejun; Dore, Anthony J; Zhang, Lin; Liu, Lei; Cheng, Miaomiao

    2018-01-01

    The Yangtze River basin is one of the world's hotspots for nitrogen (N) deposition and likely plays an important role in China's riverine N output. Here we constructed a basin-scale total dissolved inorganic N (DIN) deposition (bulk plus dry) pattern based on published data at 100 observational sites between 2000 and 2014, and assessed the relative contributions of different reactive N (N r ) emission sectors to total DIN deposition using the GEOS-Chem model. Our results show a significant spatial variation in total DIN deposition across the Yangtze River basin (33.2 kg N ha -1 yr -1 on average), with the highest fluxes occurring mainly in the central basin (e.g., Sichuan, Hubei and Hunan provinces, and Chongqing municipality). This indicates that controlling N deposition should build on mitigation strategies according to local conditions, namely, implementation of stricter control of N r emissions in N deposition hotspots but moderate control in the areas with low N deposition levels. Total DIN deposition in approximately 82% of the basin area exceeded the critical load of N deposition for semi-natural ecosystems along the basin. On the basin scale, the dominant source of DIN deposition is fertilizer use (40%) relative to livestock (11%), industry (13%), power plant (9%), transportation (9%), and others (18%, which is the sum of contributions from human waste, residential activities, soil, lighting and biomass burning), suggesting that reducing NH 3 emissions from improper fertilizer (including chemical and organic fertilizer) application should be a priority in curbing N deposition. This, together with distinct spatial variations in emission sector contributions to total DIN deposition also suggest that, in addition to fertilizer, major emission sectors in different regions of the basin should be considered when developing synergistic control measures. Copyright © 2017. Published by Elsevier Ltd.

  12. Near-ground ozone source attributions and outflow in central eastern China during MTX2006

    Science.gov (United States)

    Li, J.; Wang, Z.; Akimoto, H.; Yamaji, K.; Takigawa, M.; Pochanart, P.; Liu, Y.; Tanimoto, H.; Kanaya, Y.

    2008-12-01

    A 3-D regional chemical transport model, the Nested Air Quality Prediction Model System (NAQPMS), with an on-line tracer tagging module was used to study the source of the near-ground (pollutants, and it captured highly polluted and clean cases well. The simulated near-ground ozone level over CEC was 60-85 ppbv (parts per billion by volume), which was higher than values in Japan and over the North Pacific (20-50 ppbv). The simulated tagged tracer data indicated that the regional-scale transport of chemically produced ozone over other areas in CEC contributed to the greatest fraction (49%) of the near-ground mean ozone at Mt. Tai in June; in situ photochemistry contributed only 12%. Due to high anthropogenic and biomass burning emissions that occurred in the southern part of the CEC, the contribution to ground ozone levels from this area played the most important role (32.4 ppbv, 37.9% of total ozone) in the monthly mean ozone concentration at Mt. Tai; values reached 59 ppbv (62%) on 6-7 June 2006. The monthly mean horizontal distribution of chemically produced ozone from various ozone production regions indicated that photochemical reactions controlled the spatial distribution of O3 over CEC. The regional-scale transport of pollutants also played an important role in the spatial and temporal distribution of ozone over CEC. Chemically produced ozone from the southern part of the study region can be transported northeastwardly to the northern rim of CEC; the mean contribution was 5-10 ppbv, and it reached 25 ppbv during high ozone events. Studies of the outflow of CEC ozone and its precursors, as well as their influences and contributions to the ozone level over adjacent regions/countries, revealed that the contribution of CEC ozone to mean ozone mixing ratios over the Korean Peninsula and Japan was 5-15 ppbv, of which about half was due to the direct transport of ozone from CEC and half was produced locally by ozone precursors transported from CEC.

  13. Preliminary design of bellows for the DNB beam source by EJMA and FE linear analysis

    International Nuclear Information System (INIS)

    Trapasiya, Shobhit; Muvvala, Venkata Nagaraju; Rambilas, P.; Gangadharan, Roopesh; Rotti, Chandramouli; Chakraborty, Arun Kumar; Sharma, Dheeraj Kumar

    2015-01-01

    In piping system, U-shaped Bellows are widely used among flexible elements. In general, bellows are typically design for Fatigue behavior according to the EJMA standard based on empirically generated fatigue curves. The present work proposes a methodology in the design of bellows by design by analyses and validates its design by EJMA standard. A linear FE approach is chosen to in line with the EJMA standard. The proposed methodology is benchmarked with the available literatures. The same practice is implemented in the preliminary design of a U-shaped bellows in the water line circuits of DNB beam source. DNB Beam Source is a negative ion source-based neutral beam generator for ITER operates at 100KV. The beam divergence (intrinsic) and magnetic fields from ITER torus causes deflection of beams. This calls for beam optic alignment, which are assured by BS Movement mechanism system. To accomplish the above movement requirements, bellows, which is a stringent of its kind (± 22 mm axial, ± 45 mm lateral within 400mm available space with single ply), is designed between the beam source and possible rigid interface-cooling lines coming from HVB. The paper describes right from conceptual stage to preliminary design. Optimization tools are adopted in the selecting bellow dimensions using MATLAB. At the end a coordinated approach between FE based assessment (in ANSYS) and widely applied code, EJMA is implemented for the validation of design and found FE approach is a very conservative than later in the present case. (author)

  14. A Python-Based Open Source System for Geographic Object-Based Image Analysis (GEOBIA Utilizing Raster Attribute Tables

    Directory of Open Access Journals (Sweden)

    Daniel Clewley

    2014-06-01

    Full Text Available A modular system for performing Geographic Object-Based Image Analysis (GEOBIA, using entirely open source (General Public License compatible software, is presented based around representing objects as raster clumps and storing attributes as a raster attribute table (RAT. The system utilizes a number of libraries, developed by the authors: The Remote Sensing and GIS Library (RSGISLib, the Raster I/O Simplification (RIOS Python Library, the KEA image format and TuiView image viewer. All libraries are accessed through Python, providing a common interface on which to build processing chains. Three examples are presented, to demonstrate the capabilities of the system: (1 classification of mangrove extent and change in French Guiana; (2 a generic scheme for the classification of the UN-FAO land cover classification system (LCCS and their subsequent translation to habitat categories; and (3 a national-scale segmentation for Australia. The system presented provides similar functionality to existing GEOBIA packages, but is more flexible, due to its modular environment, capable of handling complex classification processes and applying them to larger datasets.

  15. Preliminary design study of an alternate heat source assembly for a Brayton isotope power system

    Science.gov (United States)

    Strumpf, H. J.

    1978-01-01

    Results are presented for a study of the preliminary design of an alternate heat source assembly (HSA) intended for use in the Brayton isotope power system (BIPS). The BIPS converts thermal energy emitted by a radioactive heat source into electrical energy by means of a closed Brayton cycle. A heat source heat exchanger configuration was selected and optimized. The design consists of a 10 turn helically wound Hastelloy X tube. Thermal analyses were performed for various operating conditions to ensure that post impact containment shell (PICS) temperatures remain within specified limits. These limits are essentially satisfied for all modes of operation except for the emergency cooling system for which the PICS temperatures are too high. Neon was found to be the best choice for a fill gas for auxiliary cooling system operation. Low cycle fatigue life, natural frequency, and dynamic loading requirements can be met with minor modifications to the existing HSA.

  16. The preliminary tests of the superconducting electron cyclotron resonance ion source DECRIS-SC2.

    Science.gov (United States)

    Efremov, A; Bekhterev, V; Bogomolov, S; Drobin, V; Loginov, V; Lebedev, A; Yazvitsky, N; Yakovlev, B

    2012-02-01

    A new compact version of the "liquid He-free" superconducting ECR ion source, to be used as an injector of highly charged heavy ions for the MC-400 cyclotron, is designed and built at the Flerov Laboratory of Nuclear Reactions in collaboration with the Laboratory of High Energy Physics of JINR. The axial magnetic field of the source is created by the superconducting magnet and the NdFeB hexapole is used for the radial plasma confinement. The microwave frequency of 14 GHz is used for ECR plasma heating. During the first tests, the source shows a good enough performance for the production of medium charge state ions. In this paper, we will present the design parameters and the preliminary results with gaseous ions.

  17. Preliminary studies of adaptation of Self- efficacy Scale for Sources of Mathematics

    Directory of Open Access Journals (Sweden)

    Ramírez Flores, Celia María

    2011-07-01

    Full Text Available In the field of educational psychologically the construct of self-efficacy has received special attention. It has been shown that those students who trust in their own abilities get better academic performance. However, few studies analyze the sources of self-efficacy. Self-efficacy believes are developed according to how people interpret information coming from four different sources: experience skills, vicarious learning, social persuasion, and physiological states. Recently, Usher & Pajares (2009 developed an instrument to assess sources of self-efficacy in Math. The goal of the present work was to evaluate psychometric properties of this scale in a local sample of adolescents from 13 to 15 years old. Preliminary results supported the use of this measure as an adequate alternative to assess self-efficacy in Math. However, more studies are needed in order to obtain a measure more contextualized to the educational system of local students.

  18. Greenhouse Gas Source Detection and Attribution in the San Francisco Bay Area of California Using a Mobile Measurement Platform

    Science.gov (United States)

    Martien, P. T.; Guha, A.; Newman, S.; Young, A.; Bower, J.; Perkins, I.; Randall, S.; Stevenson, E.; Hilken, H.

    2017-12-01

    The Bay Area Air Quality Management District, the San Francisco Bay Area's air quality regulatory agency, has set a goal to reduce the region's greenhouse gas (GHG) emissions 80% below 1990 levels by 2050, consistent with the State of California's climate goals. Recently, the Air District's governing board adopted a 2017 Clean Air Plan advancing the agency's vision and including actions to put the region on a path to achieving the 2050 goal while also reducing air pollution and related health impacts. The Plan includes GHG rule-making efforts, policy initiatives, local government partnerships, outreach, grants and incentives, encompassing over 250 specific implementation actions across all economic sectors to effect ambitious emission reductions in the region. To support the 2017 Plan, the Air District has built a mobile measurement platform (GHG research van) to perform targeted CH4 emissions hotspot detection and source attribution. Instruments in the van measure CH4, CO2 and N2O in ambient plumes. Coincident measurements of source tracers like isotopic methane (13C - CH4), CO and ethane (C2H6) provide the capability to distinguish between biogenic, combustion-based and fossil-based fugitive methane sources. We report observations of CH4 plumes from source-specific measurements in and around facilities including a wastewater treatment plant, a composting operation, a waste-to-energy anaerobic digestion plant and a few refineries. We performed leak surveys inside several electric utility-operated facilities including a power plant and an underground natural gas storage facility. We sampled exhaust from a roadway tunnel and computed fleet-averaged automobile-related CH4 and N2O emission factors. We used tracer-to-tracer emission ratios to create chemical signatures of emissions from each sampled source category. We compare measurement-based ratios with those used to derive the regional GHG inventory. Data from these and other sources will lead to an improved

  19. Preliminary feasibility study on production of cobalt-60 source for industrial irradiation

    International Nuclear Information System (INIS)

    Joo, Po Kook; Park, Kyung Bae; Ahn, Yun Soo; Lee, Jong Tai; Kim, Hark Rho

    1999-05-01

    As there is a high possible demand of industrial Co-60 source in the world market, feasibility study of a project was performed to produce and to export Co-60 sources, utilizing KEPCO's Wolsung NPP for irradiation of cobalt and KAERI's hot-cells for fabrication of cobalt sources. Main concerns of the study were to understand irradiation and fabrication (encapsulation) processes and to examine related technologies, required facilities and equipment. In particular, it was examined intensively if it would be possible to modify facilities around the reactor vessel of Wolsung NPP tp substantiate the related licensing in order to irradiate cobalt in the reactor. It is expected that once, if cooperation scheme with MDS Nordion of Canada is established, main issues such as modification of facilities, related licensing, raw material procurement and technology transfer for high quality product will be solved. In order to review overall feasibility of the project, present status and prospect of the world market was surveyed and various usages of cobalt sources were reviewed with emphasis on possible demand increase per usage. Food poisoning accidents are prevailing worldwide and food irradiation with cobalt sources is considered as a promising measure to prevent them and may bring forth high increase of cobalt sources demand in the world market. Preliminary economic feasibility was studied in conservation, evaluating roughly the investment and the operating cost based on materials from various information sources. (author)

  20. The use of Pb, Sr, and Hg isotopes in Great Lakes precipitation as a tool for pollution source attribution

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, Laura S., E-mail: lsaylors@umich.edu [University of Michigan, Department of Earth and Environmental Sciences, 1100 N. University Ave., Ann Arbor, MI 48109 (United States); Blum, Joel D. [University of Michigan, Department of Earth and Environmental Sciences, 1100 N. University Ave., Ann Arbor, MI 48109 (United States); Dvonch, J. Timothy [University of Michigan, Air Quality Laboratory, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Gratz, Lynne E. [University of Washington-Bothell, 18115 Campus Way NE, Bothell, WA 98011 (United States); Landis, Matthew S. [U.S. EPA, Office of Research and Development, Research Triangle Park, NC 27709 (United States)

    2015-01-01

    The anthropogenic emission and subsequent deposition of heavy metals including mercury (Hg) and lead (Pb) present human health and environmental concerns. Although it is known that local and regional sources of these metals contribute to deposition in the Great Lakes region, it is difficult to trace emissions from point sources to impacted sites. Recent studies suggest that metal isotope ratios may be useful for distinguishing between and tracing source emissions. We measured Pb, strontium (Sr), and Hg isotope ratios in daily precipitation samples that were collected at seven sites across the Great Lakes region between 2003 and 2007. Lead isotope ratios ({sup 207}Pb/{sup 206}Pb = 0.8062 to 0.8554) suggest that Pb deposition was influenced by coal combustion and processing of Mississippi Valley-Type Pb ore deposits. Regional differences in Sr isotope ratios ({sup 87}Sr/{sup 86}Sr = 0.70859 to 0.71155) are likely related to coal fly ash and soil dust. Mercury isotope ratios (δ{sup 202}Hg = − 1.13 to 0.13‰) also varied among the sites, likely due to regional differences in coal isotopic composition, and fractionation occurring within industrial facilities and in the atmosphere. These data represent the first combined characterization of Pb, Sr, and Hg isotope ratios in precipitation collected across the Great Lakes region. We demonstrate the utility of multiple metal isotope ratios in parallel with traditional trace element multivariate statistical modeling to enable more complete pollution source attribution. - Highlights: • We measured Pb, Sr, and Hg isotopes in precipitation from the Great Lakes region. • Pb isotopes suggest that deposition was impacted by coal combustion and metal production. • Sr isotope ratios vary regionally, likely due to soil dust and coal fly ash. • Hg isotopes vary due to fractionation occurring within facilities and the atmosphere. • Isotope results support conclusions of previous trace element receptor modeling.

  1. Preliminary Calculation for Plasma Chamber Design of Pulsed Electron Source Based on Plasma

    International Nuclear Information System (INIS)

    Widdi Usada

    2009-01-01

    This paper described the characteristics of pulsed electron sources with anode-cathode distance of 5 cm, electrode diameter of 10 cm, driven by capacitor energy of 25 J. The preliminary results showed that if the system is operated with diode resistance is 1.6 Ω, plasma resistance is 0.14 Ω, and β is 0.94, the achieved of plasma voltage is 640 V, its current is 4.395 kA with its pulse width of 0.8 μsecond. According to breakdown voltage based on Paschen empirical formula, with this achieved voltage, this system could be operated for operation pressure of 1 torr. (author)

  2. Multi-Sensor Constrained Time Varying Emissions Estimation of Black Carbon: Attributing Urban and Fire Sources Globally

    Science.gov (United States)

    Cohen, J. B.

    2015-12-01

    The short lifetime and heterogeneous distribution of Black Carbon (BC) in the atmosphere leads to complex impacts on radiative forcing, climate, and health, and complicates analysis of its atmospheric processing and emissions. Two recent papers have estimated the global and regional emissions of BC using advanced statistical and computational methods. One used a Kalman Filter, including data from AERONET, NOAA, and other ground-based sources, to estimate global emissions of 17.8+/-5.6 Tg BC/year (with the increase attributable to East Asia, South Asia, Southeast Asia, and Eastern Europe - all regions which have had rapid urban, industrial, and economic expansion). The second additionally used remotely sensed measurements from MISR and a variance maximizing technique, uniquely quantifying fire and urban sources in Southeast Asia, as well as their large year-to-year variability over the past 12 years, leading to increases from 10% to 150%. These new emissions products, when run through our state-of-the art modelling system of chemistry, physics, transport, removal, radiation, and climate, match 140 ground stations and satellites better in both an absolute and a temporal sense. New work now further includes trace species measurements from OMI, which are used with the variance maximizing technique to constrain the types of emissions sources. Furthermore, land-use change and fire estimation products from MODIS are also included, which provide other constraints on the temporal and spatial nature of the variations of intermittent sources like fires or new permanent sources like expanded urbanization. This talk will introduce a new, top-down constrained, weekly varying BC emissions dataset, show that it produces a better fit with observations, and draw conclusions about the sources and impacts from urbanization one hand, and fires on another hand. Results specific to the Southeast and East Asia will demonstrate inter- and intra-annual variations, such as the function of

  3. Preliminary design and off-design performance analysis of an Organic Rankine Cycle for geothermal sources

    International Nuclear Information System (INIS)

    Hu, Dongshuai; Li, Saili; Zheng, Ya; Wang, Jiangfeng; Dai, Yiping

    2015-01-01

    Highlights: • A method for preliminary design and performance prediction is established. • Preliminary data of radial inflow turbine and plate heat exchanger are obtained. • Off-design performance curves of critical components are researched. • Performance maps in sliding pressure operation are illustrated. - Abstract: Geothermal fluid of 90 °C and 10 kg/s can be exploited together with oil in Huabei Oilfield of China. Organic Rankine Cycle is regarded as a reasonable method to utilize these geothermal sources. This study conducts a detailed design and off-design performance analysis based on the preliminary design of turbines and heat exchangers. The radial inflow turbine and plate heat exchanger are selected in this paper. Sliding pressure operation is applied in the simulation and three parameters are considered: geothermal fluid mass flow rate, geothermal fluid temperature and condensing pressure. The results indicate that in all considered conditions the designed radial inflow turbine has smooth off-design performance and no choke or supersonic flow are found at the nozzle and rotor exit. The lager geothermal fluid mass flow rate, the higher geothermal fluid temperature and the lower condensing pressure contribute to the increase of cycle efficiency and net power. Performance maps are illustrated to make system meet different load requirements especially when the geothermal fluid temperature and condensing pressure deviate from the design condition. This model can be used to provide basic data for future detailed design, and predict off-design performance in the initial design phase

  4. Particulate Matter and Ozone Prediction and Source Attribution for U.S. Air Quality Management in a Changing World

    Science.gov (United States)

    Sanyal, S.; Wuebbles, D. J.

    2017-12-01

    In this study, the focus is on how global changes in climate and emissions will affect the U.S. air quality, especially on fine particulate matter and ozone, projecting their future trends and quantifying key source attribution. We are conducting three primary experiments : (1) historical simulations for period 1994-2013 to establish the credibility of the system and refine process-level understanding of U.S. regional air quality; (2) projections for period 2041-2060 to quantify individual and combined impacts of global climate and emissions changes under multiple scenarios; (3) sensitivity analyses to determine future changes in pollution sources and their relative contributions from anthropogenic and natural emissions, long-range pollutant transport, and climate change effects. Here we will present the result from the first experiment with the global model CESM1.2 (with fully coupled chemistry using CAM-chem5) driven by NASA Modern-Era Retrospective analysis for Research and Applications (MERRA) reanalysis data at 0.9o x 1.25o resolution. We will present the comparison between the results from model simulation with observation data from EPA database. Since there is always a challenge in comparing gridded prediction from model data with point data from the observation databases, because the model simulations calculate the average outcome over a grid for a given set of conditions while the stochastic component (e.g. sub-grid variations) embedded in the observations are not accounted for, we are using extensive statistical measure to do the comparison. We will also determine relative contributions from multiscale (local, regional, global) processes, major source regions (Mexico, Canada, Asia, Africa) and types (natural, anthropogenic) and associated uncertainties (climate decadal oscillations/interannual variations, emissions and model structure errors).

  5. Spatio-temporal Variations and Source Contributions of China's Premature Deaths Attributable to Ambient PM2.5

    Science.gov (United States)

    Rong, X.; Wang, H.

    2016-12-01

    With rapid economic growth, China has witnessed increasingly frequent and severe haze and smog episodes over the past decade, posing serious health impacts to the Chinese population, especially those in densely populated city clusters. Quantifications of the spatial and temporal variations of health impacts attributed to ambient fine particulate matter (PM2.5) are not only important for designing effective strategies in mitigating the health damage of air pollution, but also provide valuable references for other developing regions in the world. In this study, we evaluated the spatial distribution of premature deaths in China between 2000 and 2014 attributed to ambient PM2.5 in accord with Global Burden of Disease (GBD) based on a high resolution population density map, satellite retrieved PM2.5 concentration, and provincial health data. An Integrated Exposure Response (IER) model was applied to analyze the premature deaths for four leading causes (ischemic heart disease (IHD), chronic obstructive pulmonary disease (COPD), lung cancer (LC), stroke) in China. The contributions of emission sources to air pollution and related mortality burdens across China were further evaluated by incorporating CMAQ model. Our results suggest that China's anthropogenic ambient PM2.5 led to 1,255,400 premature deaths in 2010, 42% higher than the level in 2000. Besides the increased PM2.5 concentration, rapid urbanization has been attracting large population migration into the more developed eastern coastal urban areas, intensifying the overall health impacts. Our analysis implies that the health burdens were exacerbated in some developing inner provinces with high population density (e.g. Henan, Anhui, Sichuan) because of the relocation of more polluting and resource-intensive industries into these regions. China's regulations on PM2.5 should not be loosened on inner provinces to avoid such national level environmental inequities, and furthermore policies should be designed to form

  6. A preliminary study of synchrotron light sources for x-ray lithography

    International Nuclear Information System (INIS)

    Hoffmann, C.R.; Bigham, C.B.; Ebrahim, N.A.; Sawicki, J.A.; Taylor, T.

    1989-02-01

    A preliminary study of synchrotron light sources has been made, primarily oriented toward x-ray lithography. X-ray lithography is being pursued vigorously in several countries, with a goal of manufacturing high-density computer chips (0.25 μm feature sizes), and may attain commercial success in the next decade. Many other applications of soft x-rays appear worthy of investigation as well. The study group visited synchrotron radiation facilities and had discussions with members of the synchrotron radiation community, particularly Canadians. It concluded that accelerator technology for a conventional synchrotron light source appropriate for x-ray lithography is well established and is consistent with skills and experience at Chalk River Nuclear Laboratories. Compact superconducting systems are being developed also. Their technical requirements overlap with capabilities at Chalk River. (32 refs)

  7. Black Carbon and Sulfate Aerosols in the Arctic: Long-term Trends, Radiative Impacts, and Source Attributions

    Science.gov (United States)

    Wang, H.; Zhang, R.; Yang, Y.; Smith, S.; Rasch, P. J.

    2017-12-01

    North America contributed significantly to the overall decreasing trend in Arctic BC and sulfate, especially, in the lower troposphere. The long-term changes in the spatial distributions of aerosols, their radiative impacts and source attributions, along with implications for the Arctic warming trend, will be discussed.

  8. Preliminary PM2.5 and PM10 fractions source apportionment complemented by statistical accuracy determination

    Directory of Open Access Journals (Sweden)

    Samek Lucyna

    2016-03-01

    Full Text Available Samples of PM10 and PM2.5 fractions were collected between the years 2010 and 2013 at the urban area of Krakow, Poland. Numerous types of air pollution sources are present at the site; these include steel and cement industries, traffic, municipal emission sources and biomass burning. Energy dispersive X-ray fluorescence was used to determine the concentrations of the following elements: Cl, K, Ca, Ti, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, As and Pb within the collected samples. Defining the elements as indicators, airborne particulate matter (APM source profiles were prepared by applying principal component analysis (PCA, factor analysis (FA and multiple linear regression (MLR. Four different factors identifying possible air pollution sources for both PM10 and PM2.5 fractions were attributed to municipal emissions, biomass burning, steel industry, traffic, cement and metal industry, Zn and Pb industry and secondary aerosols. The uncertainty associated with each loading was determined by a statistical simulation method that took into account the individual elemental concentrations and their corresponding uncertainties. It will be possible to identify two or more sources of air particulate matter pollution for a single factor in case it is extremely difficult to separate the sources.

  9. Preparation of a Strong Thin Polonium Source And Preliminary Experiments on the Yield of (α,n) Reactions

    International Nuclear Information System (INIS)

    Broda, E.

    1945-01-01

    This report was written by E. Broda and P. K. Wright at the Cavendish Laboratory (Cambridge) in July 1945 and is about the preparation of a strong thin polonium source and preliminary experiments on the yield of (alpha,n) reactions. This report includes the experiment description, the discussion of the results and consist of 4 parts: (1) the electrode position of polonium under different conditions (2) a standard procedure for preparation of strong thin Po sources (3) a simple method for the recovery of RaD from complex mixtures (4) some preliminary experiments with a Po source. (nowak)

  10. Preparation of a Strong Thin Polonium Source And Preliminary Experiments on the Yield of (α,n) Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Broda, E.

    1945-07-01

    This report was written by E. Broda and P. K. Wright at the Cavendish Laboratory (Cambridge) in July 1945 and is about the preparation of a strong thin polonium source and preliminary experiments on the yield of (alpha,n) reactions. This report includes the experiment description, the discussion of the results and consist of 4 parts: (1) the electrode position of polonium under different conditions (2) a standard procedure for preparation of strong thin Po sources (3) a simple method for the recovery of RaD from complex mixtures (4) some preliminary experiments with a Po source. (nowak)

  11. Source attribution of human campylobacteriosis at the point of exposure by combining comparative exposure assessment and subtype comparison based on comparative genomic fingerprinting.

    Directory of Open Access Journals (Sweden)

    André Ravel

    Full Text Available Human campylobacteriosis is a common zoonosis with a significant burden in many countries. Its prevention is difficult because humans can be exposed to Campylobacter through various exposures: foodborne, waterborne or by contact with animals. This study aimed at attributing campylobacteriosis to sources at the point of exposure. It combined comparative exposure assessment and microbial subtype comparison with subtypes defined by comparative genomic fingerprinting (CGF. It used isolates from clinical cases and from eight potential exposure sources (chicken, cattle and pig manure, retail chicken, beef, pork and turkey meat, and surface water collected within a single sentinel site of an integrated surveillance system for enteric pathogens in Canada. Overall, 1518 non-human isolates and 250 isolates from domestically-acquired human cases were subtyped and their subtype profiles analyzed for source attribution using two attribution models modified to include exposure. Exposure values were obtained from a concurrent comparative exposure assessment study undertaken in the same area. Based on CGF profiles, attribution was possible for 198 (79% human cases. Both models provide comparable figures: chicken meat was the most important source (65-69% of attributable cases whereas exposure to cattle (manure ranked second (14-19% of attributable cases, the other sources being minor (including beef meat. In comparison with other attributions conducted at the point of production, the study highlights the fact that Campylobacter transmission from cattle to humans is rarely meat borne, calling for a closer look at local transmission from cattle to prevent campylobacteriosis, in addition to increasing safety along the chicken supply chain.

  12. Source attribution of human campylobacteriosis at the point of exposure by combining comparative exposure assessment and subtype comparison based on comparative genomic fingerprinting.

    Science.gov (United States)

    Ravel, André; Hurst, Matt; Petrica, Nicoleta; David, Julie; Mutschall, Steven K; Pintar, Katarina; Taboada, Eduardo N; Pollari, Frank

    2017-01-01

    Human campylobacteriosis is a common zoonosis with a significant burden in many countries. Its prevention is difficult because humans can be exposed to Campylobacter through various exposures: foodborne, waterborne or by contact with animals. This study aimed at attributing campylobacteriosis to sources at the point of exposure. It combined comparative exposure assessment and microbial subtype comparison with subtypes defined by comparative genomic fingerprinting (CGF). It used isolates from clinical cases and from eight potential exposure sources (chicken, cattle and pig manure, retail chicken, beef, pork and turkey meat, and surface water) collected within a single sentinel site of an integrated surveillance system for enteric pathogens in Canada. Overall, 1518 non-human isolates and 250 isolates from domestically-acquired human cases were subtyped and their subtype profiles analyzed for source attribution using two attribution models modified to include exposure. Exposure values were obtained from a concurrent comparative exposure assessment study undertaken in the same area. Based on CGF profiles, attribution was possible for 198 (79%) human cases. Both models provide comparable figures: chicken meat was the most important source (65-69% of attributable cases) whereas exposure to cattle (manure) ranked second (14-19% of attributable cases), the other sources being minor (including beef meat). In comparison with other attributions conducted at the point of production, the study highlights the fact that Campylobacter transmission from cattle to humans is rarely meat borne, calling for a closer look at local transmission from cattle to prevent campylobacteriosis, in addition to increasing safety along the chicken supply chain.

  13. Preliminary radiation transport analysis for the proposed National Spallation Neutron Source (NSNS)

    International Nuclear Information System (INIS)

    Johnson, J.O.; Lillie, R.A.

    1997-01-01

    The use of neutrons in science and industry has increased continuously during the past 50 years with applications now widely used in physics, chemistry, biology, engineering, and medicine. Within this history, the relative merits of using pulsed accelerator spallation sources versus reactors for neutron sources as the preferred option for the future. To address this future need, the Department of Energy (DOE) has initiated a pre-conceptual design study for the National Spallation Neutron Source (NSNS) and given preliminary approval for the proposed facility to be built at Oak Ridge National Laboratory (ORNL). The DOE directive is to design and build a short pulse spallation source in the 1 MS power range with sufficient design flexibility that it can be upgraded and operated at a significantly higher power at a later stage. The pre-conceptualized design of the NSNS initially consists of an accelerator system capable of delivering a 1 to 2 GeV proton beam with 1 MW of beam power in an approximate 0.5 microsecond pulse at a 60 Hz frequency onto a single target station. The NSNS will be upgraded in stages to a 5 MW facility with two target stations (a high power station operating at 60 Hz and a low power station operating at 10 Hz). Each target station will contain four moderators (combinations of cryogenic and ambient temperature) and 18 beam liens for a total of 36 experiment stations. This paper summarizes the radiation transport analysis strategies for the proposed NSNS facility

  14. What is the source of cultural differences? -- Examining the influence of thinking style on the attribution process.

    Science.gov (United States)

    Jen, Chun-Hui; Lien, Yunn-Wen

    2010-02-01

    The present research is intended to find out whether individuals with analytic or holistic thought have different attribution processes. Cross-cultural research has suggested that East Asians, who tend to have a holistic thought pattern, differ in cognitive process from Westerners, who tend to engage in analytic thought. However, studies that found cultural difference in attribution process may have non-equivalence problems that make it hard to interpret the causal relationship between thinking style and attribution process. The present research extends this by measuring participants' thinking style within a single culture in order to ensure equivalence on potentially confounding variables such as prior knowledge and cognitive capacity. Two experiments demonstrate that both types of thinkers have identical attribution processes and suggest different thinking styles might relate to different tendencies toward situational information, but not to the attribution process itself. Copyright 2009 Elsevier B.V. All rights reserved.

  15. Preliminary Design of a Synchronized Narrow Bandwidth FEL for Taiwan Light Source

    CERN Document Server

    Keung Lau Wai; Ching Fan, Tai; Zone Hsiao Feng; Tung Hsu Kuo; Hwang, Ching Shiang; Cheng Kuo Chin; Huei Luo Guo; Jen Wang Duan; Ping Wang Jau; Huey Wang Min

    2004-01-01

    Design study of a narrow line-width, high power IR-FEL facility has been carried out at NSRRC. This machine is designed to synchronize with the U9 undulator radiation of Taiwan Light Source and therefore provide new opportunity for chemical dynamics and condensed matter research. It has been proposed to use a super-conducting linac to provide a 60 MeV high quality electron beam to drive a 2.5-10 microns FEL oscillator with U5 undulator. Operating this linac in energy recovery mode will also be considered as an option to improve overall system effeciency and reduce heat loss and radiation dosage at the beam dump. Performance requirements and outcomes from this preliminary design study will be reported.

  16. Microwave frequency sweep interferometer for plasma density measurements in ECR ion sources: Design and preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Torrisi, Giuseppe [INFN - Laboratori Nazionali del Sud, Via S. Sofia 62, 95125 Catania (Italy); University Mediterranea of Reggio Calabria, Reggio Calabria (Italy); Mascali, David; Neri, Lorenzo; Leonardi, Ornella; Celona, Luigi; Castro, Giuseppe; Agnello, Riccardo; Caruso, Antonio; Passarello, Santi; Longhitano, Alberto; Gammino, Santo [INFN - Laboratori Nazionali del Sud, Via S. Sofia 62, 95125 Catania (Italy); Sorbello, Gino [INFN - Laboratori Nazionali del Sud, Via S. Sofia 62, 95125 Catania (Italy); University of Catania, Catania, Italy and INFN-LNS, Catania (Italy); Isernia, Tommaso [University Mediterranea of Reggio Calabria, Reggio Calabria (Italy)

    2016-02-15

    The Electron Cyclotron Resonance Ion Sources (ECRISs) development is strictly related to the availability of new diagnostic tools, as the existing ones are not adequate to such compact machines and to their plasma characteristics. Microwave interferometry is a non-invasive method for plasma diagnostics and represents the best candidate for plasma density measurement in hostile environment. Interferometry in ECRISs is a challenging task mainly due to their compact size. The typical density of ECR plasmas is in the range 10{sup 11}–10{sup 13} cm{sup −3} and it needs a probing beam wavelength of the order of few centimetres, comparable to the chamber radius. The paper describes the design of a microwave interferometer developed at the LNS-INFN laboratories based on the so-called “frequency sweep” method to filter out the multipath contribution in the detected signals. The measurement technique and the preliminary results (calibration) obtained during the experimental tests will be presented.

  17. The Effect of Irrigation and Nitrogen on Growth Attributes and Chlorophyll Content of Garlic in Line Source Sprinkler Irrigation System

    Directory of Open Access Journals (Sweden)

    rahim motalebifard

    2017-02-01

    Full Text Available Introduction: With 12 million tons production per year, garlic is the fourth important crop in world. In addition to its medical value, it has been used in food industry. The Hamedan province with 1900 ha cultivation area and 38 percent of production is one of the most important garlic area productions in Iran. Few studies on water use and management of garlic exist in the world. Garlic is very sensitive to water deficit especially in tubers initiation and ripening periods. The current research was done because of scarce research on garlic production under water deficit condition in Iran and importance of plant nutrition and nutrients especially nitrogen on garlic production under stressful conditions. Nitrogen is necessary and important element for increasing the yield and quality of garlic. Application of nitrogen increases the growth trend of garlic such as number of leaves, leaf length and plant body. Reports have shown that garlic has high nitrogen requirement, particularly in the early stages of growth. Materials and Methods: This study was conducted for evaluating the combined effects of nitrogen and irrigation on the yield and quality of garlic (Allium sativumL.. The study was performed as a split-block based on randomized complete blocks design with factors of irrigation at four levels (0-3(normal irrigation, 3-6 (slight water deficit, 6-9 (moderate water deficit and 9-12 (sever water deficit meters distance from main line source sprinkler system, nitrogen at four levels (0, 50,100 and 150 kg nitrogen per ha using three replications and line source sprinkler irrigation system. The total water of irrigation levels was measured by boxes that were fixed in meddle of each plot. The statistical analysis of results were performed using themethod described by Hanks (1980. The chlorophyll index was measured using the chlorophyll meter 502 (Minolta, Spain. The chlorophyll a and bwas measured by the method described by Arnon (1946 and Gross (1991

  18. Antenatal surveillance through estimates of the sources underlying the abdominal phonogram: a preliminary study

    International Nuclear Information System (INIS)

    Jiménez-González, A; James, C J

    2013-01-01

    Today, it is generally accepted that current methods for biophysical antenatal surveillance do not facilitate a comprehensive and reliable assessment of foetal well-being and that continuing research into alternative methods is necessary to improve antenatal monitoring procedures. In our research, attention has been paid to the abdominal phonogram, a signal that is recorded by positioning an acoustic sensor on the maternal womb and contains valuable information about foetal status, but which is hidden by maternal and environmental sources. To recover such information, previous work has used single-channel independent component analysis (SCICA) on the abdominal phonogram and successfully retrieved estimates of the foetal phonocardiogram, the maternal phonocardiogram, the maternal respirogram and noise. The availability of these estimates made it possible for the current study to focus on their evaluation as sources for antenatal surveillance purposes. To this end, the foetal heart rate (FHR), the foetal heart sounds morphology, the maternal heart rate (MHR) and the maternal breathing rate (MBR) were collected from the estimates retrieved from a dataset of 25 abdominal phonograms. Next, these parameters were compared with reference values to quantify the significance of the physiological information extracted from the estimates. As a result, it has been seen that the instantaneous FHR, the instantaneous MHR and the MBR collected from the estimates consistently followed the trends given by the reference signals, which is a promising outcome for this preliminary study. Thus, as far as this study has gone, it can be said that the independent traces retrieved by SCICA from the abdominal phonogram are likely to become valuable sources of information for well-being surveillance, both foetal and maternal. (paper)

  19. Preliminary Results of Nuclear Fluorescence Imaging of Alpha and Beta Emitting Sources

    International Nuclear Information System (INIS)

    Feener, Jessica S.; Charlton, William S.

    2013-06-01

    The preliminary results from a series of nuclear fluorescence imaging experiments using a variety of radioactive sources and shielding are given. These experiments were done as part of a proof of concept to determine if nuclear fluorescence imaging could be used as a safeguards measurements tool or for nuclear warhead verification for nuclear arms control treaties such as the New Strategic Arms Reduction Treaty and the Fissile Material Cut-Off Treaty. An off-the-shelf Princeton Instruments charged coupled device camera system was used to image the emission of fluorescence photons from the de-excitation of nitrogen molecules in air that have been excited by ionizing radiation. The fluorescence emissions are primarily in the near ultraviolet range; between the wavelengths of 300 and 400 nm. Fluorescent imaging techniques are currently being investigated in a number of applications. A French research team has successfully demonstrated this concept for remote imaging of alpha contamination. It has also been shown that the phenomenon can be seen through translucent materials and that alpha radiation can be seen in the presence of large gamma backgrounds. Additionally, fluorescence telescopes and satellites utilize the de-excitation of nitrogen molecules to observe cosmic ray showers in the atmosphere. In cosmic ray shower detection, electrons are the main contributor to the excitation of the of nitrogen molecules in air. The experiments presented in this paper were designed to determine if the imaging system could observe beta emitting sources, differentiate between beta emitters and alpha emitting materials such as uranium oxide and uranium metal, and to further investigate the phenomenon through translucent and non-translucent materials. The initial results show that differentiation can be made between beta and alpha emitting sources and that the device can observe the phenomenon through very thin non-transparent material. Additionally, information is given on the

  20. The Atacama Cosmology Telescope: Development and preliminary results of point source observations

    Science.gov (United States)

    Fisher, Ryan P.

    2009-06-01

    The Atacama Cosmology Telescope (ACT) is a six meter diameter telescope designed to measure the millimeter sky with arcminute angular resolution. The instrument is currently conducting its third season of observations from Cerro Toco in the Chilean Andes. The primary science goal of the experiment is to expand our understanding of cosmology by mapping the temperature fluctuations of the Cosmic Microwave Background (CMB) at angular scales corresponding to multipoles up to [cursive l] ~ 10000. The primary receiver for current ACT observations is the Millimeter Bolometer Array Camera (MBAC). The instrument is specially designed to observe simultaneously at 148 GHz, 218 GHz and 277 GHz. To accomplish this, the camera has three separate detector arrays, each containing approximately 1000 detectors. After discussing the ACT experiment in detail, a discussion of the development and testing of the cold readout electronics for the MBAC is presented. Currently, the ACT collaboration is in the process of generating maps of the microwave sky using our first and second season observations. The analysis used to generate these maps requires careful data calibration to produce maps of the arcminute scale CMB temperature fluctuations. Tests and applications of several elements of the ACT calibrations are presented in the context of the second season observations. Scientific exploration has already begun on preliminary maps made using these calibrations. The final portion of this thesis is dedicated to discussing the point sources observed by the ACT. A discussion of the techniques used for point source detection and photometry is followed by a presentation of our current measurements of point source spectral indices.

  1. Human Campylobacteriosis in Luxembourg, 2010-2013: A Case-Control Study Combined with Multilocus Sequence Typing for Source Attribution and Risk Factor Analysis.

    Science.gov (United States)

    Mossong, Joël; Mughini-Gras, Lapo; Penny, Christian; Devaux, Anthony; Olinger, Christophe; Losch, Serge; Cauchie, Henry-Michel; van Pelt, Wilfrid; Ragimbeau, Catherine

    2016-02-10

    Campylobacteriosis has increased markedly in Luxembourg during recent years. We sought to determine which Campylobacter genotypes infect humans, where they may originate from, and how they may infect humans. Multilocus sequence typing was performed on 1153 Campylobacter jejuni and 136 C. coli human strains to be attributed to three putative animal reservoirs (poultry, ruminants, pigs) and to environmental water using the asymmetric island model. A nationwide case-control study (2010-2013) for domestic campylobacteriosis was also conducted, including 367 C. jejuni and 48 C. coli cases, and 624 controls. Risk factors were investigated by Campylobacter species, and for strains attributed to different sources using a combined case-control and source attribution analysis. 282 sequence types (STs) were identified: ST-21, ST-48, ST-572, ST-50 and ST-257 were prevailing. Most cases were attributed to poultry (61.2%) and ruminants (33.3%). Consuming chicken outside the home was the dominant risk factor for both Campylobacter species. Newly identified risk factors included contact with garden soil for either species, and consuming beef specifically for C. coli. Poultry-associated campylobacteriosis was linked to poultry consumption in wintertime, and ruminant-associated campylobacteriosis to tap-water provider type. Besides confirming chicken as campylobacteriosis primary source, additional evidence was found for other reservoirs and transmission routes.

  2. A methodology for translating positional error into measures of attribute error, and combining the two error sources

    Science.gov (United States)

    Yohay Carmel; Curtis Flather; Denis Dean

    2006-01-01

    This paper summarizes our efforts to investigate the nature, behavior, and implications of positional error and attribute error in spatiotemporal datasets. Estimating the combined influence of these errors on map analysis has been hindered by the fact that these two error types are traditionally expressed in different units (distance units, and categorical units,...

  3. Risk factors for campylobacteriosis of chicken, ruminant, and environmental origin: a combined case-control and source attribution analysis

    NARCIS (Netherlands)

    Mughini Gras, L.|info:eu-repo/dai/nl/413306046; Smid, J.H.|info:eu-repo/dai/nl/313996458; Wagenaar, J.A.|info:eu-repo/dai/nl/126613354; de Boer, A.G.; Havelaar, A.H.|info:eu-repo/dai/nl/072306122; Friesema, I.H.M.; French, N.P.; Busani, L.; van Pelt, W.

    2012-01-01

    BACKGROUND Campylobacteriosis contributes strongly to the disease burden of food-borne pathogens. Case-control studies are limited in attributing human infections to the different reservoirs because they can only trace back to the points of exposure, which may not point to the original reservoirs

  4. Risk Factors for Campylobacteriosis of Chicken, Ruminant, and Environmental Origin: A Combined Case-Control and Source Attribution Analysis

    NARCIS (Netherlands)

    Gras, L.M.; Smid, J.H.; Wagenaar, J.A.; Boer, de A.G.; Havelaar, A.H.; Friesema, I.H.M.; French, N.P.; Busani, L.; Pelt, van W.

    2012-01-01

    Background: Campylobacteriosis contributes strongly to the disease burden of food-borne pathogens. Case-control studies are limited in attributing human infections to the different reservoirs because they can only trace back to the points of exposure, which may not point to the original reservoirs

  5. Attribution of Human Listeria monocytogenes Infections in England and Wales to Ready-to-Eat Food Sources Placed on the Market: Adaptation of the Hald Salmonella Source Attribution Model

    DEFF Research Database (Denmark)

    Little, Christine L.; Pires, Sara Monteiro; Gillespie, Iain A.

    2010-01-01

    the potential of this approach to quantify the contribution of different food sources to the burden of human listeriosis in England and Wales from 2004 to 2007. The most important food sources for the overall population were multicomponent foods (sandwiches and prepacked mixed salad vegetables) (23.1%), finfish...

  6. Preliminary study of single contrast enhanced dual energy heart imaging using dual-source CT

    International Nuclear Information System (INIS)

    Peng Jin; Zhang Longjiang; Zhou Changsheng; Lu Guangming; Ma Yan; Gu Haifeng

    2009-01-01

    Objective: To evaluate the feasibility and preliminary applications of single contrast enhanced dual energy heart imaging using dual-source CT (DSCT). Methods: Thirty patients underwent dual energy heart imaging with DSCT, of which 6 cases underwent SPECT or DSA within one week. Two experienced radiologists assessed image quality of coronary arteries and iodine map of myocardium. and correlated the coronary artery stenosis with the perfusion distribution of iodine map. Results: l00% (300/300) segments reached diagnostic standards. The mean score of image for all patients was 4.68±0.57. Mural coronary artery was present in 10 segments in S cases, atherosclerotic plaques in 32 segments in 12 cases, of which 20 segments having ≥50% stenosis, 12 segments ≤50% stenosis; dual energy CT coronary angiography was consistent with the DSA in 3 patients. 37 segmental perfusion abnormalities on iodine map were found in 15 cases, including 28 coronary blood supply segment narrow segment and 9 no coronary stenosis (including three negative segments in SPECD. Conclusion: Single contrast enhanced dual energy heart imaging can provide good coronary artery and myocardium perfusion images in the patients with appropriate heart rate, which has a potential to be used in the clinic and further studies are needed. (authors)

  7. Preliminary design of the beam loss monitor system for the Advanced Photon Source

    International Nuclear Information System (INIS)

    Patterson, D.R.

    1992-01-01

    The preliminary design of the beam loss monitor for the ANL Advanced Photon Source is based on the use of an air dielectric coaxial cable as a long ionization chamber. Each coaxial cable section uses a high sensitivity DC current-to-voltage converter with both linear and integrating ranges. Pulse timing circuits determine the positions of individual losses by measuring the time at which the resulting voltage pulses arrive at the beginning of the coaxial ionization chamber. A possible timing ambiguity can be removed by correlating the particle bunch timing with the resulting voltage pulse timing. Measurements have shown that pulse rise times less than 15 nanoseconds can be obtained, so that determining loss locations to better than 7 feet may be possible. Best performance may be obtained when 500 VDC is applied to a 50-ohm, 7/8-inch air dielectric coaxial cable filled with approximately 8 psig of a 95% argon, 5% carbon dioxide gas mixture. Cable lengths will be between 100 and 300 feet long, depending on the part of the accelerator being monitored

  8. Risk factors for human salmonellosis originating from pigs, cattle, broiler chickens and egg laying hens: a combined case-control and source attribution analysis.

    Directory of Open Access Journals (Sweden)

    Lapo Mughini-Gras

    Full Text Available Several case-control studies have investigated risk factors for human salmonellosis while others have used Salmonella subtyping to attribute human infections to different food and animal reservoirs. This study combined case-control and source attribution data into a single analysis to explore risk factors at the point of exposure for human salmonellosis originating from four putative food-producing animal reservoirs (pigs, cattle, broilers and layers/eggs in the Netherlands. We confirmed that most human cases (∼ 90% were attributable to layers/eggs and pigs. Layers/eggs and broilers were the most likely reservoirs of salmonellosis in adults, in urban areas, and in spring/summer, whereas pigs and cattle were the most likely reservoirs of salmonellosis in children, in rural areas, and in autumn/winter. Several reservoir-specific risk factors were identified. Not using a chopping board for raw meat only and consuming raw/undercooked meat were risk factors for infection with salmonellas originating from pigs, cattle and broilers. Consuming raw/undercooked eggs and by-products were risk factors for layer/egg-associated salmonellosis. Using antibiotics was a risk factor for pig- and cattle-associated salmonellosis and using proton-pump inhibitors for salmonellosis attributable to any reservoir. Pig- and cattle-associated infections were also linked to direct contact with animals and environmental exposure (e.g. playing in sandboxes. Eating fish, meat in pastry, and several non-meat foods (fruit, vegetables and pasteurized dairy products were protective factors. Consuming pork and occupational exposure to animals and/or raw meats were protective against layer/egg-associated salmonellosis. We concluded that individuals acquiring salmonellosis from different reservoirs have different associated risk factors, suggesting that salmonellas may infect humans through various transmission pathways depending on their original reservoirs. The outcome of

  9. Risk Factors for Human Salmonellosis Originating from Pigs, Cattle, Broiler Chickens and Egg Laying Hens: A Combined Case-Control and Source Attribution Analysis

    Science.gov (United States)

    Mughini-Gras, Lapo; Enserink, Remko; Friesema, Ingrid; Heck, Max; van Duynhoven, Yvonne; van Pelt, Wilfrid

    2014-01-01

    Several case-control studies have investigated risk factors for human salmonellosis while others have used Salmonella subtyping to attribute human infections to different food and animal reservoirs. This study combined case-control and source attribution data into a single analysis to explore risk factors at the point of exposure for human salmonellosis originating from four putative food-producing animal reservoirs (pigs, cattle, broilers and layers/eggs) in the Netherlands. We confirmed that most human cases (∼90%) were attributable to layers/eggs and pigs. Layers/eggs and broilers were the most likely reservoirs of salmonellosis in adults, in urban areas, and in spring/summer, whereas pigs and cattle were the most likely reservoirs of salmonellosis in children, in rural areas, and in autumn/winter. Several reservoir-specific risk factors were identified. Not using a chopping board for raw meat only and consuming raw/undercooked meat were risk factors for infection with salmonellas originating from pigs, cattle and broilers. Consuming raw/undercooked eggs and by-products were risk factors for layer/egg-associated salmonellosis. Using antibiotics was a risk factor for pig- and cattle-associated salmonellosis and using proton-pump inhibitors for salmonellosis attributable to any reservoir. Pig- and cattle-associated infections were also linked to direct contact with animals and environmental exposure (e.g. playing in sandboxes). Eating fish, meat in pastry, and several non-meat foods (fruit, vegetables and pasteurized dairy products) were protective factors. Consuming pork and occupational exposure to animals and/or raw meats were protective against layer/egg-associated salmonellosis. We concluded that individuals acquiring salmonellosis from different reservoirs have different associated risk factors, suggesting that salmonellas may infect humans through various transmission pathways depending on their original reservoirs. The outcome of classical case

  10. Global Scale Attribution of Anthropogenic and Natural Dust Sources and their Emission Rates Based on MODIS Deep Blue Aerosol Products

    Science.gov (United States)

    Ginoux, Paul; Prospero, Joseph M.; Gill, Thomas E.; Hsu, N. Christina; Zhao, Ming

    2012-01-01

    Our understanding of the global dust cycle is limited by a dearth of information about dust sources, especially small-scale features which could account for a large fraction of global emissions. Here we present a global-scale high-resolution (0.1 deg) mapping of sources based on Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue estimates of dust optical depth in conjunction with other data sets including land use. We ascribe dust sources to natural and anthropogenic (primarily agricultural) origins, calculate their respective contributions to emissions, and extensively compare these products against literature. Natural dust sources globally account for 75% of emissions; anthropogenic sources account for 25%. North Africa accounts for 55% of global dust emissions with only 8% being anthropogenic, mostly from the Sahel. Elsewhere, anthropogenic dust emissions can be much higher (75% in Australia). Hydrologic dust sources (e.g., ephemeral water bodies) account for 31% worldwide; 15% of them are natural while 85% are anthropogenic. Globally, 20% of emissions are from vegetated surfaces, primarily desert shrublands and agricultural lands. Since anthropogenic dust sources are associated with land use and ephemeral water bodies, both in turn linked to the hydrological cycle, their emissions are affected by climate variability. Such changes in dust emissions can impact climate, air quality, and human health. Improved dust emission estimates will require a better mapping of threshold wind velocities, vegetation dynamics, and surface conditions (soil moisture and land use) especially in the sensitive regions identified here, as well as improved ability to address small-scale convective processes producing dust via cold pool (haboob) events frequent in monsoon regimes.

  11. The Sanskrit and Arabic Sources of the Praśnatantra Attributed to Nīlakaṇṭha

    Directory of Open Access Journals (Sweden)

    Martin Gansten

    2014-12-01

    Full Text Available The highly popular Praśnatantra attributed to Nīlakaṇṭha of Kāśī (fl. late 16th century and sometimes regarded as the third volume of his Tājikanīlakaṇṭhī is shown to depend for its basic structure on an abridged Sanskrit version of the Kitāb fi l-masāʾil wa-l-aḥkām by Sahl ibn Bishr (early 9th century, apparently authored by Samarasiṃha in the 13th century, to which quotations primarily from Sanskrit astrological works in the classical Indian style have been added, resulting in a hybrid of Indian and Perso-Arabic interrogational astrology.

  12. The attribution of human infections with antimicrobial resistant Salmonella bacteria in Denmark to sources of animal origin

    DEFF Research Database (Denmark)

    Hald, Tine; Lo Fo Wong, Danilo M. A.; Aarestrup, Frank Møller

    2007-01-01

    Based on the Danish Salmonella surveillance in 2000-2001, we developed a mathematical model for quantifying the contribution of each major animal-food sources to human salmonellosis caused by antimicrobial resistant bacteria. Domestic food products accounted for 53.1% of all cases, mainly caused......, but infections with multidrug- and quinolone-resistant isolates were more commonly caused by imported food products and travelling, emphasizing the need for a global perspective on food safety and antimicrobial usage....... by table eggs (37.6%). A large proportion (19%) of cases were travel related, while 18% could not be associated with any source. Imported food products accounted for 9.5% of all cases; the most important source being imported chicken. Multidrug and quinolone resistance was rarely found in cases acquired...

  13. Source attribution of human salmonellosis using a meta-analysis of case-control studies of sporadic infections

    DEFF Research Database (Denmark)

    Coutinho Calado Domingues, Ana Rita; Pires, Sara Monteiro; Hisham Beshara Halasa, Tariq

    2012-01-01

    Salmonella is an important cause of human illness. Disease is frequently associated with foodborne transmission, but other routes of exposure are recognized. Identifying sources of disease is essential for prioritizing public health interventions. Numerous case-control studies of sporadic salmone...

  14. The use of Pb, Sr, and Hg isotopes in Great Lakes precipitation as a tool for pollution source attribution

    Science.gov (United States)

    The anthropogenic emission and subsequent deposition of heavy metals including mercury (Hg) and lead (Pb) presents human health and environmental concerns. Although it is known that local and regional sources of these metals contribute to deposition in the Great Lakes region, it ...

  15. Purslane weed (Portulaca oleracea): a prospective plant source of nutrition, omega-3 fatty acid, and antioxidant attributes.

    Science.gov (United States)

    Uddin, Md Kamal; Juraimi, Abdul Shukor; Hossain, Md Sabir; Nahar, Most Altaf Un; Ali, Md Eaqub; Rahman, M M

    2014-01-01

    Purslane (Portulaca oleracea L.) is an important plant naturally found as a weed in field crops and lawns. Purslane is widely distributed around the globe and is popular as a potherb in many areas of Europe, Asia, and the Mediterranean region. This plant possesses mucilaginous substances which are of medicinal importance. It is a rich source of potassium (494 mg/100 g) followed by magnesium (68 mg/100 g) and calcium (65 mg/100 g) and possesses the potential to be used as vegetable source of omega-3 fatty acid. It is very good source of alpha-linolenic acid (ALA) and gamma-linolenic acid (LNA, 18 : 3 w3) (4 mg/g fresh weight) of any green leafy vegetable. It contained the highest amount (22.2 mg and 130 mg per 100 g of fresh and dry weight, resp.) of alpha-tocopherol and ascorbic acid (26.6 mg and 506 mg per 100 g of fresh and dry weight, resp.). The oxalate content of purslane leaves was reported as 671-869 mg/100 g fresh weight. The antioxidant content and nutritional value of purslane are important for human consumption. It revealed tremendous nutritional potential and has indicated the potential use of this herb for the future.

  16. Attribution of the Main Sources of Biomass Burning in South East Asia that Impact on Air Quality in Singapore

    Science.gov (United States)

    Hansen, A. B.; Kendall, E.; Chew, B. N.; Chong, W. M.; Gan, C.; Hort, M. C.; Shaw, F.; Witham, C. S.

    2017-12-01

    Biomass burning in South East Asia causes intense haze episodes in Singapore, these are of major concern to the local government and the population exposed to the haze. Using a Lagrangian dispersion model we have studied haze in the seven most recent years (2010 - 2016) to gain a deeper understanding of intense haze in Singapore. In this study, modelled haze time-series at one eastern and one western monitoring station in Singapore are compared to local observed PM10 and PM2.5 air concentrations. The haze time-series are broken down by season or month, source region, and monitoring location.The analysis, presented as time series and pie charts, illustrates the relative contribution to haze in Singapore from different regions, variations between seasons and the correlation of impact to the combined timing of burning activity and meteorological patterns. Air history maps, showing where air arriving in Singapore originates from and/or has travelled through, are used to isolate the meteorological dependence of impacts. These show a strong monsoonal variation and help explain the inter-annual differences between sources and actual concentrations of biomass burning PM in Singapore. For example, there is a strong correlation in 2013 between burning in Riau and haze in Singapore, but a weak correlation in other years when a significant part of haze originates from, e.g., Peninsula Malaysia, but emissions are seemingly negligible. We see that, in spite of the size of Singapore, there is significant difference in concentrations and major contributing source regions between the two monitoring stations, annually and seasonally. The differences at the two monitoring stations are seen in varying degrees in the years 2011, 2012, 2014, and 2015, throughout different seasons. Although only biomass burning is considered in the simulations, our modelled results are in good agreement with local observations. We have identified the source regions with the biggest contributions to haze

  17. Allocation and source attribution of lead and cadmium in maize (Zea mays L.) impacted by smelting emissions

    International Nuclear Information System (INIS)

    Bi Xiangyang; Feng Xinbin; Yang Yuangen; Li Xiangdong; Shin, Grace P.Y.; Li Feili; Qiu Guangle; Li Guanghui; Liu Taoze; Fu Zhiyou

    2009-01-01

    Plants grown in contaminated areas may accumulate trace metals to a toxic level via their roots and/or leaves. In the present study, we investigated the distribution and sources of Pb and Cd in maize plants (Zea mays L.) grown in a typical zinc smelting impacted area of southwestern China. Results showed that the smelting activities caused significantly elevated concentrations of Pb and Cd in the surrounding soils and maize plants. Pb isotope data revealed that the foliar uptake of atmospheric Pb was the dominant pathway for Pb to the leaf and grain tissues of maize, while Pb in the stalk and root tissues was mainly derived from root uptake. The ratio of Pb to Cd concentrations in the plants indicated that Cd had a different behavior from Pb, with most Cd in the maize plants coming from the soil via root uptake. - The sources and pathways of Pb and Cd accumulated in maize were assessed using Pb isotopes and Pb/Cd ratios

  18. Source attribution using FLEXPART and carbon monoxide emission inventories for the IAGOS In-situ Observation database

    Science.gov (United States)

    Fontaine, Alain; Sauvage, Bastien; Pétetin, Hervé; Auby, Antoine; Boulanger, Damien; Thouret, Valerie

    2016-04-01

    Since 1994, the IAGOS program (In-Service Aircraft for a Global Observing System http://www.iagos.org) and its predecessor MOZAIC has produced in-situ measurements of the atmospheric composition during more than 46000 commercial aircraft flights. In order to help analyzing these observations and further understanding the processes driving their evolution, we developed a modelling tool SOFT-IO quantifying their source/receptor link. We improved the methodology used by Stohl et al. (2003), based on the FLEXPART plume dispersion model, to simulate the contributions of anthropogenic and biomass burning emissions from the ECCAD database (http://eccad.aeris-data.fr) to the measured carbon monoxide mixing ratio along each IAGOS flight. Thanks to automated processes, contributions are simulated for the last 20 days before observation, separating individual contributions from the different source regions. The main goal is to supply add-value products to the IAGOS database showing pollutants geographical origin and emission type. Using this information, it may be possible to link trends in the atmospheric composition to changes in the transport pathways and to the evolution of emissions. This tool could be used for statistical validation as well as for inter-comparisons of emission inventories using large amounts of data, as Lagrangian models are able to bring the global scale emissions down to a smaller scale, where they can be directly compared to the in-situ observations from the IAGOS database.

  19. Directional passive ambient air monitoring of ammonia for fugitive source attribution; a field trial with wind tunnel characteristics

    Science.gov (United States)

    Solera García, M. A.; Timmis, R. J.; Van Dijk, N.; Whyatt, J. D.; Leith, I. D.; Leeson, S. R.; Braban, C. F.; Sheppard, L. J.; Sutton, M. A.; Tang, Y. S.

    2017-10-01

    Atmospheric ammonia is a precursor for secondary particulate matter formation, which harms human health and contributes to acidification and eutrophication. Under the 2012 Gothenburg Protocol, 2005 emissions must be cut by 6% by 2020. In the UK, 83% of total emissions originate from agricultural practices such as fertilizer use and rearing of livestock, with emissions that are spatially extensive and variable in nature. Such fugitive emissions make resolving and tracking of individual site performance challenging. The Directional Passive Air quality Sampler (DPAS) was trialled at Whim Bog, an experimental site with a wind-controlled artificial release of ammonia, in combination with CEH-developed ammonia samplers. Whilst saturation issues were identified, two DPAS-MANDE (Mini Annular Denuder) systems, when deployed in parallel, displayed an average relative deviation of 15% (2-54%) across all 12 directions, with the directions exposed to the ammonia source showing ∼5% difference. The DPAS-MANDE has shown great potential for directional discrimination and can contribute to the understanding and management of fugitive ammonia sources from intensive agriculture sites.

  20. Allocation and source attribution of lead and cadmium in maize (Zea mays L.) impacted by smelting emissions

    Energy Technology Data Exchange (ETDEWEB)

    Bi Xiangyang [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002 (China); Key Laboratory of Biogeology and Environmental Geology, Ministry of Education, China University of Geosciences, Wuhan 430074 (China); Feng Xinbin [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002 (China)], E-mail: fengxinbin@vip.skleg.cn; Yang Yuangen [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002 (China); Li Xiangdong; Shin, Grace P.Y. [Department of Civil and Structural Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon (Hong Kong); Li Feili [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China); Qiu Guangle; Li Guanghui; Liu Taoze; Fu Zhiyou [State Key Laboratory of Environmental Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002 (China)

    2009-03-15

    Plants grown in contaminated areas may accumulate trace metals to a toxic level via their roots and/or leaves. In the present study, we investigated the distribution and sources of Pb and Cd in maize plants (Zea mays L.) grown in a typical zinc smelting impacted area of southwestern China. Results showed that the smelting activities caused significantly elevated concentrations of Pb and Cd in the surrounding soils and maize plants. Pb isotope data revealed that the foliar uptake of atmospheric Pb was the dominant pathway for Pb to the leaf and grain tissues of maize, while Pb in the stalk and root tissues was mainly derived from root uptake. The ratio of Pb to Cd concentrations in the plants indicated that Cd had a different behavior from Pb, with most Cd in the maize plants coming from the soil via root uptake. - The sources and pathways of Pb and Cd accumulated in maize were assessed using Pb isotopes and Pb/Cd ratios.

  1. Evaluation of Personal and Built Environment Attributes to Physical Activity: A Multilevel Analysis on Multiple Population-Based Data Sources

    Directory of Open Access Journals (Sweden)

    Wei Yang

    2012-01-01

    Full Text Available Background. Studies have documented that built environment factors potentially promote or impede leisure time physical activity (LTPA. This study explored the relationship between multiple built environment factors and individual characteristics on LTPA. Methods. Multiple data sources were utilized including individual level data for health behaviors and health status from the Nevada Behavioral Risk Factor Surveillance System (BRFSS and community level data from different data sources including indicators for recreation facilities, safety, air quality, commute time, urbanization, population density, and land mix level. Mixed model logistic regression and geographic information system (GIS spatial analysis were conducted. Results. Among 6,311 respondents, 24.4% reported no LTPA engagement during the past 30 days. No engagement in LTPA was significantly associated with (1 individual factors: older age, less education, lower income, being obesity, and low life satisfaction and (2 community factors: more commute time, higher crime rate, urban residence, higher population density, but not for density and distance to recreation facilities, air quality, and land mix. Conclusions. Multiple data systems including complex population survey and spatial analysis are valuable tools on health and built environment studies.

  2. A preliminary report on the SRP [Savannah River Plant] source term study

    International Nuclear Information System (INIS)

    Woodley, R.E.; Baldwin, D.L.

    1984-09-01

    The present report describes the experimental system developed for the measurement of fission product release from Savannah River Plant (SRP) fuels and the preliminary measurements performed on unirradiated SRP fuel specimens and simulated irradiated fuel to check out the system prior to its installation in a hot cell for measurements on irradiated SRP fuel

  3. Bread fortified with anthocyanin-rich extract from black rice as nutraceutical sources: Its quality attributes and in vitro digestibility.

    Science.gov (United States)

    Sui, Xiaonan; Zhang, Yan; Zhou, Weibiao

    2016-04-01

    Anthocyanin-rich black rice extract powder (ABREP) as a nutraceutical source was fortified into bread. The quality and digestibility behaviors of bread with ABREP were evaluated through instrumental and in vitro digestion studies. The quality of bread with 2% of ABREP was not significantly (p>0.05) different from the control bread; however, increasing the ABREP level to 4% caused less elasticity and higher density of bread. A mathematical model was further developed to systemically describe the trajectory of bread digestion. The digestion rates of bread with ABREP were found to be reduced by 12.8%, 14.1%, and 20.5% for bread with 1%, 2%, and 4% of ABREP, respectively. Results of the study suggest that the fortification of anthocyanins into bread could be an alternative way to produce functional bread with a lower digestion rate and extra health benefits. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Campylobacteriosis in urban versus rural areas: a case-case study integrated with molecular typing to validate risk factors and to attribute sources of infection.

    Directory of Open Access Journals (Sweden)

    Simon Lévesque

    Full Text Available Campylobacter infection is a leading cause of bacterial gastroenteritis worldwide, and most clinical cases appear as isolated, sporadic infections for which the source is rarely apparent. From July 2005 to December 2007 we conducted a prospective case-case study of sporadic, domestically-acquired Campylobacter enteritis in rural versus urban areas and a prevalence study of Campylobacter in animal and environmental sources in the Eastern Townships, Quebec. Isolates were typed using Multilocus Sequence Typing (MLST to reinforce the case-case findings and to assign a source probability estimate for each human isolate. The risk of human campylobacteriosis was 1.89-fold higher in rural than urban areas. Unconditional multivariate logistic regression analysis identified two independent risk factors associated with human Campylobacter infections acquired in rural area: occupational exposure to animals (OR = 10.6, 95% CI: 1.2-91, p = 0.032, and household water coming from a private well (OR = 8.3, 95% CI: 3.4-20.4, p<0.0001. A total of 851 C. jejuni isolates (178 human, 257 chicken, 87 bovine, 266 water, 63 wild bird were typed using MLST. Among human isolates, the incidence rates of clonal complexes (CC CC-21, CC-45, and CC-61 were higher in rural than urban areas. MLST-based source attribution analysis indicated that 64.5% of human C. jejuni isolates were attributable to chicken, followed by cattle (25.8%, water (7.4%, and wild birds (2.3%. Chicken was the attributable source for the majority of cases, independent of residential area, sex and age. The increased incidence in rural compared to urban areas was associated with occupational exposure to animals, particularly cattle among those aged 15-34 years, and with consumption of private well water. Both bovine and water exposure appeared to contribute to the seasonal variation in campylobacteriosis. These results provide a basis for developing public education and preventive programs targeting the

  5. A technique to consider mismatches between fMRI and EEG/MEG sources for fMRI-constrained EEG/MEG source imaging: a preliminary simulation study

    International Nuclear Information System (INIS)

    Im, Chang-Hwan; Lee, Soo Yeol

    2006-01-01

    fMRI-constrained EEG/MEG source imaging can be a powerful tool in studying human brain functions with enhanced spatial and temporal resolutions. Recent studies on the combination of fMRI and EEG/MEG have suggested that fMRI prior information could be readily implemented by simply imposing different weighting factors to cortical sources overlapping with the fMRI activations. It has been also reported, however, that such a hard constraint may cause severe distortions or elimination of meaningful EEG/MEG sources when there are distinct mismatches between the fMRI activations and the EEG/MEG sources. If one wants to obtain the actual EEG/MEG source locations and uses the fMRI prior information as just an auxiliary tool to enhance focality of the distributed EEG/MEG sources, it is reasonable to weaken the strength of fMRI constraint when severe mismatches between fMRI and EEG/MEG sources are observed. The present study suggests an efficient technique to automatically adjust the strength of fMRI constraint according to the mismatch level. The use of the proposed technique rarely affects the results of conventional fMRI-constrained EEG/MEG source imaging if no major mismatch between the two modalities is detected; while the new results become similar to those of typical EEG/MEG source imaging without fMRI constraint if the mismatch level is significant. A preliminary simulation study using realistic EEG signals demonstrated that the proposed technique can be a promising tool to selectively apply fMRI prior information to EEG/MEG source imaging

  6. Positivity effect in source attributions of arousal-matched emotional and non-emotional words during item-based directed forgetting.

    Science.gov (United States)

    Gallant, Sara N; Yang, Lixia

    2014-01-01

    Consistent with their emphasis on emotional goals, older adults often exhibit a positivity bias in attention and memory relative to their young counterparts (i.e., a positivity effect). The current study sought to determine how this age-related positivity effect would impact intentional forgetting of emotional words, a process critical to efficient operation of memory. Using an item-based directed forgetting task, 36 young and 36 older adults studied a series of arousal-equivalent words that varied in valence (i.e., positive, negative, and neutral). Each word was followed by a cue to either remember or forget the word. A subsequent "tagging" recognition task required classification of items as to-be-remembered (TBR), to-be-forgotten (TBF), or new as a measure of directed forgetting and source attribution in participants' memory. Neither young nor older adults' intentional forgetting was affected by the valence of words. A goal-consistent valence effect did, however, emerge in older adults' source attribution performance. Specifically, older adults assigned more TBR-cues to positive words and more TBF-cues to negative words. Results are discussed in light of existing literature on emotion and directed forgetting as well as the socioemotional selectivity theory underlying the age-related positivity effect.

  7. Positivity effect in source attributions of arousal-matched emotional and non-emotional words during item-based directed forgetting

    Directory of Open Access Journals (Sweden)

    Sara N. Gallant

    2014-11-01

    Full Text Available Consistent with their emphasis on emotional goals, older adults often exhibit a positivity bias in attention and memory relative to their young counterparts (i.e., a positivity effect. The current study sought to determine how this age-related positivity effect would impact intentional forgetting of emotional words, a process critical to efficient operation of memory. Using an item-based directed forgetting task, 36 young and 36 older adults studied a series of arousal-equivalent words that varied in valence (i.e., positive, negative, and neutral. Each word was followed by a cue to either remember or forget the word. A subsequent tagging recognition task required classification of items as to-be-remembered (TBR, to-be-forgotten (TBF, or new as a measure of directed forgetting and source attribution in participants’ memory. Valence did not affect intentional forgetting in both young and older age groups. A goal-consistent valence effect did, however, emerge in older adults’ source attribution performance. Specifically, older adults assigned more TBR-cues to positive words and more TBF-cues to negative words. Results are discussed in light of existing literature on emotion and directed forgetting as well as the socioemotional selectivity theory underlying the age-related positivity effect.

  8. Tropospheric Ozone Source Attribution in Southern California during Summer 2014 Based on Lidar Measurements and Model Simulations

    Science.gov (United States)

    Granados Munoz, Maria Jose; Johnson, Matthew S.; Leblanc, Thierry

    2016-01-01

    In the past decades, significant efforts have been made to increase tropospheric ozone long-term monitoring. A large number of ground-based, airborne and space-borne instruments are currently providing valuable data to contribute to better understand tropospheric ozone budget and variability. Nonetheless, most of these instruments provide in-situ surface and column-integrated data, whereas vertically resolved measurements are still scarce. Besides ozonesondes and aircraft, lidar measurements have proven to be valuable tropospheric ozone profilers. Using the measurements from the tropospheric ozone differential absorption lidar (DIAL) located at the JPL Table Mountain Facility, California, and the GEOS-Chem and GEOS-5 model outputs, the impact of the North American monsoon on tropospheric ozone during summer 2014 is investigated. The influence of the Monsoon lightning-induced NOx will be evaluated against other sources (e.g. local anthropogenic emissions and the stratosphere) using also complementary data such as backward-trajectories analysis, coincident water vapor lidar measurements, and surface ozone in-situ measurements.

  9. Attributing illness to food

    DEFF Research Database (Denmark)

    Batz, M. B.; Doyle, M. P.; Morris, J. G.

    2005-01-01

    source responsible for illness. A wide variety of food attribution approaches and data are used around the world including the analysis of outbreak data, case-control studies, microbial subtyping and source tracking methods, and expert judgment, among others. The Food Safety Research Consortium sponsored......Identification and prioritization of effective food safety interventions require an understanding of the relationship between food and pathogen from farm to consumption. Critical to this cause is food attribution, the capacity to attribute cases of foodborne disease to the food vehicle or other...... the Food Attribution Data Workshop in October 2003 to discuss the virtues and limitations of these approaches and to identify future options for collecting food attribution data in the United States. We summarize workshop discussions and identify challenges that affect progress in this critical component...

  10. Attribution of aerosol radiative forcing over India during the winter monsoon to emissions from source categories and geographical regions

    Science.gov (United States)

    Verma, S.; Venkataraman, C.; Boucher, O.

    2011-08-01

    We examine the aerosol radiative effects due to aerosols emitted from different emission sectors (anthropogenic and natural) and originating from different geographical regions within and outside India during the northeast (NE) Indian winter monsoon (January-March). These studies are carried out through aerosol transport simulations in the general circulation (GCM) model of the Laboratoire de Météorologie Dynamique (LMD). The model estimates of aerosol single scattering albedo (SSA) show lower values (0.86-0.92) over the region north to 10°N comprising of the Indian subcontinent, Bay of Bengal, and parts of the Arabian Sea compared to the region south to 10°N where the estimated SSA values lie in the range 0.94-0.98. The model estimated SSA is consistent with the SSA values inferred through measurements on various platforms. Aerosols of anthropogenic origin reduce the incoming solar radiation at the surface by a factor of 10-20 times the reduction due to natural aerosols. At the top-of-atmosphere (TOA), aerosols from biofuel use cause positive forcing compared to the negative forcing from fossil fuel and natural sources in correspondence with the distribution of SSA which is estimated to be the lowest (0.7-0.78) from biofuel combustion emissions. Aerosols originating from India and Africa-west Asia lead to the reduction in surface radiation (-3 to -8 W m -2) by 40-60% of the total reduction in surface radiation due to all aerosols over the Indian subcontinent and adjoining ocean. Aerosols originating from India and Africa-west Asia also lead to positive radiative effects at TOA over the Arabian Sea, central India (CNI), with the highest positive radiative effects over the Bay of Bengal and cause either negative or positive effects over the Indo-Gangetic plain (IGP).

  11. Exploration of the formation mechanism and source attribution of ambient ozone in Chongqing with an observation-based model

    Institute of Scientific and Technical Information of China (English)

    SU Rong; ZHAI ChongZhi; ZHANG YuanHang; LU KeDing; YU JiaYan; TAN ZhaoFeng; JIANG MeiQing; LI Jing; XIE ShaoDong; WU YuSheng; ZENG LiMin

    2018-01-01

    An intensive field campaign was conducted in Chongqing during the summer of 2015 to explore the formation mechanisms of ozone pollution.The sources of ozone,the local production rates,and the controlling factors,as well as key species of volatile organic compounds (VOCs),were quantified by integrating a local ozone budget analysis,calculations of the relative incremental reactivity,and an empirical kinetic model approach.It was found that the potential for rapid local ozone formation exists in Chongqing.During ozone pollution episodes,the ozone production rates were found to be high at the upwind station Nan Quan,the urban station Chao Zhan,and the downwind station Jin-Yun Shan.The average local ozone production rate was 30× 10-9 V/V h1 and the daily integration of the produced ozone was greater than 180× 10-9 V/V.High ozone concentrations were associated with urban and downwind air masses.At most sites,the local ozone production was VOC-limited and the key species were aromatics and alkene,which originated mainly from vehicles and solvent usage.In addition,the air masses at the northwestern rural sites were NOx-limited and the local ozone production rates were significantly higher during the pollution episodes due to the increased NOx concentrations.In summary,the ozone abatement strategies of Chongqing should be focused on the mitigation of VOCs.Nevertheless,a reduction in NOx is also beneficial for reducing the regional ozone peak values in Chongqing and the surrounding areas.

  12. Gluon attributes

    International Nuclear Information System (INIS)

    Weiler, T.

    1981-01-01

    An overview is presented of the attributes of gluons, deducible from experimental data. Particular attention is given to the photon-gluon fusion model of charm leptoproduction. The agreement with QCD and theoretical prejudice is qualitatively good

  13. Estimating source-attributable health impacts of ambient fine particulate matter exposure: global premature mortality from surface transportation emissions in 2005

    International Nuclear Information System (INIS)

    Chambliss, S E; Zeinali, M; Minjares, R; Silva, R; West, J J

    2014-01-01

    Exposure to ambient fine particular matter (PM 2.5 ) was responsible for 3.2 million premature deaths in 2010 and is among the top ten leading risk factors for early death. Surface transportation is a significant global source of PM 2.5 emissions and a target for new actions. The objective of this study is to estimate the global and national health burden of ambient PM 2.5 exposure attributable to surface transportation emissions. This share of health burden is called the transportation attributable fraction (TAF), and is assumed equal to the proportional decrease in modeled ambient particulate matter concentrations when surface transportation emissions are removed. National population-weighted TAFs for 190 countries are modeled for 2005 using the MOZART-4 global chemical transport model. Changes in annual average concentration of PM 2.5 at 0.5 × 0.67 degree horizontal resolution are based on a global emissions inventory and removal of all surface transportation emissions. Global population-weighted average TAF was 8.5 percent or 1.75 μg m −3 in 2005. Approximately 242 000 annual premature deaths were attributable to surface transportation emissions, dominated by China, the United States, the European Union and India. This application of TAF allows future Global Burden of Disease studies to estimate the sector-specific burden of ambient PM 2.5 exposure. Additional research is needed to capture intraurban variations in emissions and exposure, and to broaden the range of health effects considered, including the effects of other pollutants. (letter)

  14. Are sensory attributes and acceptance influenced by nutritional and health claims of low-sodium salami? Preliminary study with Brazilian consumers

    Directory of Open Access Journals (Sweden)

    Marcio Aurélio de Almeida

    2017-01-01

    Full Text Available The first contact between consumers and the food product is usually the packaging and it’s labelling. Therefore, it is the primary means to generate consumer’s expectations. The aim of the present work was to evaluate the influence of nutritional and health claims on acceptance of salami with reduced sodium content, aimed at finding guidance for the product reformulation. Sixt y consumers evaluated four samples of salami. The overall acceptance was evaluated using a nine - point hedonic scale, and the attributes color, tenderness, characteristic flavor and salt content, were evaluated by 7 – point just - about - right (JAR scale. For the expectation test, overall liking of salami with reduced sodium content was evaluated by consumers under three conditions : (1 blind test (B; (2 expectation generated by nutritional and health claims (E, and (3 consumers re - tasted the salami having the nutrition and health claims available (R. Student’s t - tests performed on data indicated no significant differences (p > 0.05 between the mean acceptance under the blind (B and real (R conditions, although expectation ratings (E were significantly higher than (B (p ≤ 0.05. However, linear regression of (R - B x (E - B ratings revealed a major assimilation effect of expectation, especially under negative disconfirmation (E > B. Contrast effect was also observed, but to a lesser extent . The results showed that saltiness attribute was not decisive in decreased acceptance according to the JAR scale, but it was relevant in the aftertaste generated by adding salt substitutes. Finally, nutritional and health claims had little effect on consumer ac ceptance.

  15. Polarized point sources in the LOFAR Two-meter Sky Survey: A preliminary catalog

    Science.gov (United States)

    Van Eck, C. L.; Haverkorn, M.; Alves, M. I. R.; Beck, R.; Best, P.; Carretti, E.; Chyży, K. T.; Farnes, J. S.; Ferrière, K.; Hardcastle, M. J.; Heald, G.; Horellou, C.; Iacobelli, M.; Jelić, V.; Mulcahy, D. D.; O'Sullivan, S. P.; Polderman, I. M.; Reich, W.; Riseley, C. J.; Röttgering, H.; Schnitzeler, D. H. F. M.; Shimwell, T. W.; Vacca, V.; Vink, J.; White, G. J.

    2018-06-01

    The polarization properties of radio sources at very low frequencies (right ascension, 45°-57° declination, 570 square degrees). We have produced a catalog of 92 polarized radio sources at 150 MHz at 4.'3 resolution and 1 mJy rms sensitivity, which is the largest catalog of polarized sources at such low frequencies. We estimate a lower limit to the polarized source surface density at 150 MHz, with our resolution and sensitivity, of 1 source per 6.2 square degrees. We find that our Faraday depth measurements are in agreement with previous measurements and have significantly smaller errors. Most of our sources show significant depolarization compared to 1.4 GHz, but there is a small population of sources with low depolarization indicating that their polarized emission is highly localized in Faraday depth. We predict that an extension of this work to the full LOTSS data would detect at least 3400 polarized sources using the same methods, and probably considerably more with improved data processing.

  16. Development of a high brightness ion source for IFMIF and preliminary test results

    International Nuclear Information System (INIS)

    Iga, Takashi; Okumura, Yoshikazu; Kashiwagi, Mieko

    2001-05-01

    Development of a high brightness ion source for the 40MeV/250mA deuteron beam accelerator, IFMIF, is in progress at JAERI. A prototype ion source using hot filament cathodes has been developed. This ion source consists of a multi-cusp plasma generator and a two-stage accelerator. Beam optics has been investigated at the energy of up to 60keV. Experimental results of the beam optics agreed well with the simulation by assuming that the equivalent ion mass is 2.38. Ion beam of 60keV/100mA H+, which corresponds to ion beam of 100keV/220mA D+, was obtained with optimum perveance (minimum divergence). This result indicates that the current requirement for the IFMIF ion source would be satisfied with this ion source. (author)

  17. Preliminary study of airborne electromagnetic survey using grounded source; Chihyo source gata kuchu denji tansa no kisoteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Mogi, T [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Shimoizumi, M [Kitakyushu Polytechnic College, Kitakyushu (Japan); Kusunoki, K [Central Research Institute of Electric Power Industry, Tokyo (Japan); Morikawa, T [Dowa Engineering Co. Ltd., Okayama (Japan); Jomori, N [Chiba Electronics Research Institute, Chiba (Japan)

    1996-05-01

    For the development of an airborne electromagnetic prospecting method capable of deeper exploration, a basic study was made about a system wherein a transmitter (source) is positioned on the ground and the receiving is done in the sky. Even in case of this airborne electromagnetic method, the TDEM method is supposedly advantageous over others as in case of groundborne exploration. In the study, the transient response of an airborne vertical magnetic field to a horizontal layered structure was calculated. The current source was 2000m long with a capacity of 30A. The one-layer structure was a 10 Ohm m semi-infinite ground, and the two-layer structure had a 100 Ohm m structure just under the one-layer structure. The result of the calculation suggests that, in the absence of a layer of extremely low resistivity, observation of an approximately 1 second long transient response aboard a helicopter flying at approximately 50km/h will enable an approximately 1000m deep exploration. Problems to affect airborne observation, such as swinging, natural magnetic field fluctuation, and artificially produced noises were investigated by use of a magnetometer suspended from a helicopter in flight. 2 refs., 6 figs.

  18. Preliminary evaluation of environmental issues on the use of peat as an energy source

    Energy Technology Data Exchange (ETDEWEB)

    King, R.; Richardson, S.; Walters, A.; Boesch, L.; Thomson, W.; Irons, J.

    1980-03-14

    A study to characterize the environmental issues, that would arise from an extensive peat utilization program has been initiated. The objectives of this preliminary report are to: identify the environmental issues and potential problems; examine the significance of issues in the geographical regions where peat use could be developed; and establish a methodology by which issues can be resolved or clarified through future coordinated private, state, and federal programs. An overview of peat development including discussions on conversion technologies, extraction and harvesting procedures, and land reclamation is presented. Environmental concerns are in the areas of water resources and quality, air quality, health and safety issues, solid waste management, and land reclamation. The general environmental issues, resource availability, and attitudes associated with potential peat development in ten states, containing an estimated 90 percent of US peat resources were described. The ten states reviewed are Alaska, Minnesota, Michigan, Maine, North and South Carolina, Wisconsin, New York, Florida, and Louisiana. (DMC)

  19. Preliminary Ionization Efficiencies of 11C and 14O with the LBNL ECR Ion Sources

    International Nuclear Information System (INIS)

    Xie, Z.Q.; Cerny, J.; Guo, F.Q.; Joosten, R.; Larimer, R.M.; Lyneis, C.M.; McMahan, P.; Norman, E.B.; O'Neil, J.P.; Powell, J.; Rowe, M.W.; VanBrocklin, H.F.; Wutte, D.; Xu, X.J.; Haustein, P.

    1998-01-01

    High charge states, up to fully stripped 11 C and 14 O ion, beams have been produced with the electron cyclotron resonance ion sources (LBNL, ECR and AECR-U) at Lawrence Berkeley National Laboratory. The radioactive atoms of 11 C and 14 O were collected in batch mode with an LN 2 trap and then bled into the ECR ion sources. Ionization efficiency as high as 11% for 11 C 4+ was achieved

  20. Effect of dietary incorporation of n-3 polyunsaturated fatty acids rich oil sources on fatty acid profile, keeping quality and sensory attributes of broiler chicken meat

    Directory of Open Access Journals (Sweden)

    Sridhar Kalakuntla

    2017-12-01

    Full Text Available The present study was undertaken to investigate the effect of dietary replacement of commonly used vegetable oil (sunflower oil, SFO with n-3 polyunsaturated fatty acids (PUFA rich oil sources on broiler chicken performance, carcass yield, meat fatty acid composition, keeping quality and sensory attributes of meat. In the current experiment, 300 day-old Krishibro broiler chicks were randomly distributed to 5 dietary groups (50 replicates with 6 chicks in each prepared by replacing SFO (2% and 3% of diet during starter and finisher periods, respectively with n-3 PUFA rich soybean oil (SO, mustard oil (MO, linseed oil (LO or fish oil (FO on weight basis. Variation in oil sources had no influence (P > 0.05 on performance and carcass yield. Supplementation of MO, LO or FO significantly (P < 0.01 increased the n-3 PUFA, lowered the n-6 PUFA deposition and n-6:n-3 ratio in breast and thigh without affecting the organoleptic characters (appearance, flavour, juiciness, tenderness and overall acceptability of meat. However, thiobarbituric acid reacting substances concentration in meat was increased (P < 0.01 with LO and FO supplementation compared with SFO. It is concluded that, dietary incorporation of MO, LO or FO at 2% and 3% levels during starter and finisher phase can enrich broiler chicken meat with n-3 PUFA without affecting the bird's performance and sensory characters of meat.

  1. Application of trajectory clustering and source attribution methods for investigating regional CO2 and CH4 concentrations at Germany's highest mountain site

    Science.gov (United States)

    Giemsa, Esther; Jacobeit, Jucundus; Ries, Ludwig; Frank, Gabriele; Hachinger, Stephan; Meyer-Arnek, Julian

    2017-04-01

    Carbon dioxide (CO2) and methane (CH4) represent the most important contributors to increased radiative forcing enhancing it together by contemporary 2.65 W/m2 on the global average (IPCC 2013). The unbroken increase of atmospheric greenhouse gases (GHG) has been unequivocally attributed to human emissions mainly coming from fossil fuel burning and land-use changes, while the oceans and terrestrial ecosystems slightly attenuate this rise with seasonally varying strength. Short-term fluctuations in the GHG concentrations that superimpose the seasonal cycle and the climate change driven trend reflect the presence of regional sources and sinks. A perfect place for investigating the comprehensive influence of these regional emissions is provided by the Environmental Research Station Schneefernerhaus (47.42°N, 10.98°E, 2.650m a.s.l.) situated in the eastern Alps at the southern side of Zugspitze mountain. Located just 300m below the highest peak of the German Alps, the exposed site is one of the currently 30 global core sites of the World Meteorological Organisation (WMO) Global Atmosphere Watch (GAW) programme and thus provides ideal conditions to study source-receptor relationships for greenhouse gases. We propose a stepwise statistical methodology for examining the relationship between synoptic-scale atmospheric transport patterns and climate gas mole fractions to finally receive a characterization of the sampling site with regard to the key processes driving CO2 and CH4 concentration levels. The first step entails a reliable radon-based filtering approach to subdivide the detected air masses according to their regional or 'background' origin. Simultaneously, a large number of ten-day back-trajectories from Schneefernerhaus every two hours over the entire study period 2011 - 2015 is calculated with the Lagrangian transport and dispersion model FLEXPART (Stohl et al. 2005) and subjected to cluster analysis. The weather- and emission strength-related (short

  2. Preliminary discussion on deep-sourced uranium metallogenesis and deep prospecting

    International Nuclear Information System (INIS)

    Huang Shijie

    2006-01-01

    Prospecting for hydrothermal type uranium deposits should be aimed at medium-to large-sized deposits, and be guided by mantle-sourced, superimposed, deep-sourced metallogenic theory and the establishment of a multifactor, composite, deep-sourced metallogenic model. The author suggests that hydrothermal uranium deposits may be classified into three genetic types, i.e. hydrothermal circulation concentration, postmagmatic hydrothermal and mantle fluid concentration. These types of uranium deposits are characterized by their own metallogenic features and are concentrated in the same mineralization-concentrated area forming a metallogenic series. Large-sized uranium ore fields and rich-large uranium deposits are usually closely associated with mantle-sourced metallogenesis and the formation of such uranium ore fields and deposits is characterized by specific and unique regional geologic environments. Recognition criteria of mantle-sourced metallogenesis are preliminarily proposed in the paper. It is pointed out that prospecting in the future should follow the metallogenic model proper for the specific genetic type, and the establishment of operable prospecting model to realize the model-guided prospecting. (authors)

  3. Attributing Hacks

    OpenAIRE

    Liu, Ziqi; Smola, Alexander J.; Soska, Kyle; Wang, Yu-Xiang; Zheng, Qinghua; Zhou, Jun

    2016-01-01

    In this paper we describe an algorithm for estimating the provenance of hacks on websites. That is, given properties of sites and the temporal occurrence of attacks, we are able to attribute individual attacks to joint causes and vulnerabilities, as well as estimating the evolution of these vulnerabilities over time. Specifically, we use hazard regression with a time-varying additive hazard function parameterized in a generalized linear form. The activation coefficients on each feature are co...

  4. Preliminary Tests of a Paul ion Trap as an Ion Source

    Science.gov (United States)

    Sadat Kiai, S. M.; Zirak, A. R.; Elahi, M.; Adlparvar, S.; Mortazavi, B. N.; Safarien, A.; Farhangi, S.; Sheibani, S.; Alhooie, S.; Khalaj, M. M. A.; Dabirzadeh, A. A.; Ruzbehani, M.; Zahedi, F.

    2010-10-01

    The paper reports on the design and construction of a Paul ion trap as an ion source by using an impact electron ionization technique. Ions are produced in the trap and confined for the specific time which is then extracted and detected by a Faraday cup. Especial electronic configurations are employed between the end caps, ring electrodes, electron gun and a negative voltage for the detector. This configuration allows a constant low level of pure ion source between the pulsed confined ion sources. The present experimental results are based on the production and confinement of Argon ions with good stability and repeatability, but in principle, the technique can be used for various Argon like ions.

  5. A Preliminary Assessment of Google Scholar as a Source of EAP Students' Research Materials

    Science.gov (United States)

    Helms-Park, Rena; Radia, Pavlina; Stapleton, Paul

    2007-01-01

    While the use of a search engine to find secondary sources is now a commonplace practice among undergraduate writers, recent studies show that students' online searches often lead to materials that are wholly or partially unsuitable for academic purposes. Accordingly, this project set out to determine whether using a more specialized search…

  6. Sources of Stress among Parents of Children with Intellectual Disabilities: A Preliminary Investigation in Saudi Arabia

    Science.gov (United States)

    Aldosari, Mubarak S.; Pufpaff, Lisa A.

    2014-01-01

    This study identified differences in sources of stress between parents of male children with intellectual disabilities in Saudi Arabia. Seventeen pairs of parents completed the Parent Stress Index (Abidin, 1995). Each pair of parents had a male child diagnosed with intellectual disability who either attended an institute for male children with…

  7. Comparison of Laser and Stereo Optical, SAR and InSAR Point Clouds from Air- and Space-Borne Sources in the Retrieval of Forest Inventory Attributes

    Directory of Open Access Journals (Sweden)

    Xiaowei Yu

    2015-11-01

    Full Text Available It is anticipated that many of the future forest mapping applications will be based on three-dimensional (3D point clouds. A comparison study was conducted to verify the explanatory power and information contents of several 3D remote sensing data sources on the retrieval of above ground biomass (AGB, stem volume (VOL, basal area (G, basal-area weighted mean diameter (Dg and Lorey’s mean height (Hg at the plot level, utilizing the following data: synthetic aperture radar (SAR Interferometry, SAR radargrammetry, satellite-imagery having stereo viewing capability, airborne laser scanning (ALS with various densities (0.8–6 pulses/m2 and aerial stereo imagery. Laser scanning is generally known as the primary source providing a 3D point cloud. However, photogrammetric, radargrammetric and interferometric techniques can be used to produce 3D point clouds from space- and air-borne stereo images. Such an image-based point cloud could be utilized in a similar manner as ALS providing that accurate digital terrain model is available. In this study, the performance of these data sources for providing point cloud data was evaluated with 91 sample plots that were established in Evo, southern Finland within a boreal forest zone and surveyed in 2014 for this comparison. The prediction models were built using random forests technique with features derived from each data sources as independent variables and field measurements of forest attributes as response variable. The relative root mean square errors (RMSEs varied in the ranges of 4.6% (0.97 m–13.4% (2.83 m for Hg, 11.7% (3.0 cm–20.6% (5.3 cm for Dg, 14.8% (4.0 m2/ha–25.8% (6.9 m2/ha for G, 15.9% (43.0 m3/ha–31.2% (84.2 m3/ha for VOL and 14.3% (19.2 Mg/ha–27.5% (37.0 Mg/ha for AGB, respectively, depending on the data used. Results indicate that ALS data achieved the most accurate estimates for all forest inventory attributes. For image-based 3D data, high-altitude aerial images and WorldView-2

  8. Preliminary results of a broad beam RF ion source with electron plasma interaction. Vol. 2

    Energy Technology Data Exchange (ETDEWEB)

    Abdelaziz, M E; Zakhary, S G; Ghanem, A A; Abdel-Ghaffar, A M [Ion Sources and Accelerators Department, Nuclear Research Center, Atomic Energy Authority, Cairo, (Egypt)

    1996-03-01

    A new design of a broad beam RF ion source is made to be capable to deliver wide and uniform beam with currents reaching (100 {mu} A up to 30 mA) at extraction voltages (200 V up to 2 kV). Its plasma intensifying system is made with the addition of electrons from an immersed filament in the discharge and axial magnetic field (70 up to 300 G). A uniform beam distribution is made with a planner graphite cathode which has a number of holes arranged to produce perveance matching with the normal Gaussian distribution of the beam density. These holes are arranged in a consequent orbits with equal distance between the adjacent holes in each orbit. These holes increase in diameter with increasing the orbit radius. This allows increasing the extracted ion currents at the source outer edges and decreases its value at the source inner region; producing wide and uniform beam which is suitable for material modifications. The beam profiles are traced with electromechanical scanner and X-Y recorder. The perveance matching is found to produce a beam uniformity of =66% of its width which reaches =6 cm. The variation of the output currents are with the variation of extraction voltages, magnetic field, discharge pressure and electron injection into the plasma. The extracted current increases with the increase of the discharge pressure, RF power and magnetic field intensity. The influence of electron plasma interaction is found to have a great effect on increasing the ion currents to about four times its value without electron interaction, however, this increase is limited due to presence of breakdown at V{sub ex} > 2 kV. The simple design of this source, its cleanness due to the use of pyrex discharge bottle, easy operation and maintenance adds other features to this broad beam type ion source which makes it suitable for metallurgical applications in broad beam accelerators. 6 figs.

  9. A preliminary assessment of sources of nitrate in springwaters, Suwannee River basin, Florida

    Science.gov (United States)

    Katz, B.G.; Hornsby, H.D.

    1998-01-01

    A cooperative study between the Suwannee River Water Management District (SRWMD) and the U.S. Geological Survey (USGS) is evaluating sources of nitrate in water from selected springs and zones in the Upper Floridan aquifer in the Suwannee River Basin. A multi-tracer approach, which consists of the analysis of water samples for naturally occurring chemical and isotopic indicators, is being used to better understand sources and chronology of nitrate contamination in the middle Suwannee River region. In July and August 1997, water samples were collected and analyzed from six springs and two wells for major ions, nutrients, and dissolved organic carbon. These water samples also were analyzed for environmental isotopes [18O/16O, D/H, 13C/12C, 15N/14N] to determine sources of water and nitrate. Chlorofluorocarbons (CCl3F, CCl2F2, and C2Cl3F3) and tritium (3H) were analyzed to assess the apparent ages (residence time) of springwaters and water from the Upper Floridan aquifer. Delta 15N-NO3 values in water from the six springs range from 3.94 per mil (Little River Springs) to 8.39 per mil (Lafayette Blue Spring). The range of values indicates that nitrate in the sampled springwaters most likely originates from a mixture of inorganic (fertilizers) and organic (animal wastes) sources, although the higher delta 15N-NO3 value for Lafayette Blue Spring indicates that an organic source of nitrogen is likely at this site. Water samples from the two wells sampled in Lafayette County have high delta 15N-NO3 values of 10.98 and 12.1 per mil, indicating the likelihood of an organic source of nitrate. These two wells are located near dairy and poultry farms, where leachate from animal wastes may contribute nitrate to ground water. Based on analysis of chlorofluorocarbons in ground water, the mean residence time of water in springs ranges from about 12 to 25 years. Chlorofluorocarbons-modeled recharge dates for water samples from the two shallow zones in the Upper Floridan aquifer

  10. Using enteric pathogens to assess sources of fecal contamination in the Silurian Dolomite Aquifer: Preliminary results

    Science.gov (United States)

    Muldoon, Maureen A; Borchardt, Mark A.; Spencer, Susan K.; Hunt, Randall J.; Owens, David

    2018-01-01

    The fractured Silurian dolomite aquifer is an important, but vulnerable, source of drinking water in northeast Wisconsin (Sherrill in Geology and ground water in Door County, Wisconsin, with emphasis on contamination potential in the Silurian dolomite, 1978; Bradbury and Muldoon in Hydrogeology and groundwater monitoring of fractured dolomite in the Upper Door Priority Watershed, Door County, Wisconsin, 1992; Muldoon and Bradbury in Assessing seasonal variations in recharge and water quality in the Silurian aquifer in areas with thicker soil cover. p 45, 2010). Areas underlain by the Silurian dolomite aquifer are extremely vulnerable to groundwater contamination from various land-use activities, especially the disposal of human wastewater and dairy manure. Currently there is no consensus as to which source of wastewater generates the greater impact to the aquifer.

  11. Inventory preliminary of gases of greenhouse effect in Colombia. Sources and drains

    International Nuclear Information System (INIS)

    Gonzalez B, Fabio; Concha P, Ismael; Vallejo M, Jorge I.; Rodriguez M, Humberto

    1997-01-01

    This document presents a summary of the results of the national greenhouse gas emissions inventory sources sinks and reservoirs project, which has been developed within the framework of the national study to address climate change. The study was initiated by a professionals group on behalf of the Academia Colombiana de Ciencias Exactas, Fisicas y Naturales in July 1995, with financial support of the German Organization of Cooperation GTZ and the technical assistance of the Venezuelan Country Study Greenhouse gas Inventory team

  12. Analysis of ozone and nitric acid in spring and summer Arctic pollution using aircraft, ground-based, satellite observations and MOZART-4 model: source attribution and partitioning

    Directory of Open Access Journals (Sweden)

    C. Wespes

    2012-01-01

    Full Text Available In this paper, we analyze tropospheric O3 together with HNO3 during the POLARCAT (Polar Study using Aircraft, Remote Sensing, Surface Measurements and Models, of Climate, Chemistry, Aerosols, and Transport program, combining observations and model results. Aircraft observations from the NASA ARCTAS (Arctic Research of the Composition of the Troposphere from Aircraft and Satellites and NOAA ARCPAC (Aerosol, Radiation and Cloud Processes affecting Arctic Climate campaigns during spring and summer of 2008 are used together with the Model for Ozone and Related Chemical Tracers, version 4 (MOZART-4 to assist in the interpretation of the observations in terms of the source attribution and transport of O3 and HNO3 into the Arctic (north of 60° N. The MOZART-4 simulations reproduce the aircraft observations generally well (within 15%, but some discrepancies in the model are identified and discussed. The observed correlation of O3 with HNO3 is exploited to evaluate the MOZART-4 model performance for different air mass types (fresh plumes, free troposphere and stratospheric-contaminated air masses.

    Based on model simulations of O3 and HNO3 tagged by source type and region, we find that the anthropogenic pollution from the Northern Hemisphere is the dominant source of O3 and HNO3 in the Arctic at pressures greater than 400 hPa, and that the stratospheric influence is the principal contribution at pressures less 400 hPa. During the summer, intense Russian fire emissions contribute some amount to the tropospheric columns of both gases over the American sector of the Arctic. North American fire emissions (California and Canada also show an important impact on tropospheric ozone in the Arctic boundary layer.

    Additional analysis of tropospheric O3 measurements from ground-based FTIR and from the IASI satellite sounder made

  13. Preliminary preview for a geographic and monitoring program project; a review of point source-nonpoint source effluent trading/offset systems in watersheds

    Science.gov (United States)

    Wood, Alexander Warren; Bernknopf, Richard L.

    2003-01-01

    Watershed-based trading and offset systems are being developed to improve policy-maker?s and regulator?s ability to assess nonpoint source impacts in watersheds and to evaluate the efficacy of using market-incentive programs for preserving environmental quality. An overview of the history of successful and failed trading programs throughout the United States suggests that certain political, economic, and scientific conditions within a temporal and spatial setting help meet water quality standards. The current lack of spontaneous trading among dischargers does not mean that a marketable permit trading system is an inherently inefficient regulatory approach. Rather, its infrequent use is the result of institutional and informational barriers. Improving and refining the earth science information and technologies may help determine whether trading is a suitable policy for improving water quality. However, it is debatable whether or not environmental information is the limiting factor. This paper reviews additional factors affecting the potential for instituting a trading policy. The motivation for investigating and reviewing the history of offsets and trading was inspired by a project in the preliminary stages being developed by U.S. Geological Survey Western Geographic Science Center and the Environmental Protection Agency Region IX. An offset feasibility study will be an integrated, map-based approach that incorporates environmental, economic, and statistical information to investigate the potential for using offsets to meet mercury Total Maximum Daily Loads in the Sacramento River watershed. A regional water-quality offset program is being studied that may help known point sources reduce mercury loading more cost effectively by the remediation of abandoned mines or other diffuse sources as opposed to more costly treatment at their own sites. An efficient offset program requires both a scientific basis and methods to translate that science into a regulatory decision

  14. Preliminary tests of a second harmonic rf system for the intense pulsed neutron source synchrotron

    International Nuclear Information System (INIS)

    Norem, J.; Brandeberry, F.

    1983-01-01

    The Rapid Cycling Synchrotron (RCS) of the Intense Pulsed Neutron Source (IPNS) operating at Argonne National Laboratory is presently producing intensities of 2 to 2.5 x 10 12 protons per pulse (ppp) with the addition of a new ion source. This intensity is close to the space charge limit of the machine, estimated at approx. 3 x 10 12 ppp, depending somewhat on the available aperture. Accelerator improvements are being directed at (1) increasing beam intensities for neutron science, (2) lowering acceleration losses to minimize activation, and (3) gaining better control of the beam so that losses can be made to occur when and where they can be most easily controlled. We are now proposing a third cavity for the RF system which would provide control of the longitudinal bunch shape during the cycle which would permit raising the effective space charge limit of the accelerator and reducing losses by providing more RF voltage at maximum acceleration. This paper presents an outline of the expected benefits together with recent results obtained during low energy operation with one of the two existing cavities operating at the second harmonic

  15. Preliminary design of experiment ALVAND 1 and low beta plasma source

    International Nuclear Information System (INIS)

    Anvari, A.; Azodi, H.; Naraghi, M.; Taherzadeh, M.; Torabi-Fard, A.

    1975-12-01

    The ultimate goal of a two years program, namely ''ALVAND PROJECT'' and problems concerned with the achievement of controlled thermonuclear reactions in Iran is covered. The report consists of six sections. The introduction deals with the advantages of a linear theta pinch and its comparison with toroidal and mirror devices. Attention has been paid to two important properties of the ALVAND 1 device, namely, its property of carrying out important missions in support of high beta controlled thermonuclear research and also its acting as a source for developing different diagnostic apparatus and excercising different measurement techniques. Expected plasma parameters for ALVAND 1 are given in the third section. In the fourth section the low beta plasma source and the important diagnostic techniques that may be developed are discussed. References are given in the fifth section. The calculation of the minimum required radius of a toroidal theta pinch reactor has been given in an appendix, which covers at the same time 2 schematic figures. Finally a program schedule is presented in section six

  16. Preliminary design and integration of EPICS operation interface for the Taiwan photon source

    International Nuclear Information System (INIS)

    Cheng, Y.S.; Jenny Chen; Chiu, P.C.; Kuo, C.H.; Liao, C.Y.; Hsu, K.T.; Wu, C.Y.

    2012-01-01

    The TPS (Taiwan Photon Source) is the latest generation 3 GeV synchrotron light source which has been in construction since 2010. The EPICS (Experimental Physics and Industrial Control System) framework is adopted as control system infrastructure for the TPS. The EPICS IOCs (Input Output Controller) and various database records have been gradually implemented to control and monitor available subsystems of the TPS at this moment. The subsystem includes timing, power supply, motion controller, miscellaneous Ethernet compliant devices etc. Through EPICS PVs (Process Variables) channel access, remote access I/O data via Ethernet interface can be observed by the usable graphical tool-kits, such as the EDM (Extensible Display Manager) and MATLAB. The operation interface mainly includes the function of setting, reading, save, restore and etc. Integration of operation interfaces will depend upon properties of each subsystem. In addition, the centralized management method is utilized to serve every client from file servers in order to maintain consistent versions of related EPICS files. (authors)

  17. Preliminary analysis on the tectonic stress level in the source region of Tangshan earthquake

    Science.gov (United States)

    Jian-Tao, Zhao; Cui, Xiao-Feng; Xie, Fu-Ren

    2002-05-01

    The abundant data of focal mechanism solutions in Tangshan region, China, are inverted for the tectonic stress field. Combined with tectonophysical consideration, the magnitude of the three principal stresses, as well as their vertical variation under the average crustal rock property, in the source region of the 1976 Tangshan earthquake is estimated. The relationship between crustal stress and friction μ c, pore pressure P 0 and stress shape factor Φ is studied. The paper draws the conclusion that the vertical increasing rate of the maximum principal stress σ is directly proportional to friction, and inversely to pore pressure P 0 and stress shape factor Φ; while the vertical increasing rate of the minimum principal tress σ is directly proportional to pore pressure P 0, inversely to friction μ c and stress shape factor Φ. This study is a try to invert the data of focal mechanism solutions for the complete stress tensor.

  18. Preliminary limits on the flux of muon neutrinos from extraterrestrial point sources

    International Nuclear Information System (INIS)

    Bionta, R.M.; Blewitt, G.; Bratton, C.B.

    1985-01-01

    We present the arrival directions of 117 upward-going muon events collected with the IMB proton lifetime detector during 317 days of live detector operation. The rate of upward-going muons observed in our detector was found to be consistent with the rate expected from atmospheric neutrino production. The upper limit on the total flux of extraterrestrial neutrinos >1 GeV is 2 -sec. Using our data and a Monte Carlo simulation of high energy muon production in the earth surrounding the detector, we place limits on the flux of neutrinos from a point source in the Vela X-2 system of 2 -sec with E > 1 GeV. 6 refs., 5 figs

  19. Preliminary study on air pollution source identification in Xinzhen, Beijing, using NAA and PIXE

    International Nuclear Information System (INIS)

    Caijin Xiao; Guiying Zhang; Donghui Huang; Bangfa Ni; Cunxiong Liu; Yali Qin; Hongchao Sun; Pingsheng Wang; Weizhi Tian

    2012-01-01

    A total of 178 aerosol samples in two size fractions, PM10-2.5 (coarse) and PM2.5 (fine), were collected on nucleopore films using a Gent stacked filter unit sampler at the Graduate School of China Nuclear Industrial Group during May 2007 to November of 2009. Black carbon was determined by a reflectometer. A total of 16 elements, Mg, Al, S, Si, P, Cl, Ca, K, Ti, Mn, Fe, Ni, Cu, Zn, As and Pb, were determined by Particle Induced X-ray Emission. Mg, Al, Ca, K and Mn were also determined by Neutron Activation Analysis. Concentrations of all these elements were used to identify possible pollution sources and directions of the airborne particulate matter by means of softwares PMF and CPF. Some extraordinary events, such as sandstorms, firework and transboundary fire smoke were pinpointed by a combination of time series of multielement, relevant meteorological data and softwares Wind rose, Hysplit, and Google earth. (author)

  20. On the usability of frequency distributions and source attribution of Cs-137 detections encountered in the IMS radio-nuclide network for radionuclide event screening and climate change monitoring

    Science.gov (United States)

    Becker, A.; Wotawa, G.; Zähringer, M.

    2009-04-01

    Under the provisions of the Comprehensive Nuclear-Test-Ban Treaty (CTBT), airborne radioactivity is measured by means of high purity Germanium gamma ray detectors deployed in a global monitoring network. Almost 60 of the scheduled 80 stations have been put in provisional operations by the end of 2008. Each station daily sends the 24 hour samples' spectroscopic data to the Vienna based Provisional Technical Secretariat (PTS) of the CTBT Organization (CTBTO) for review for treaty-relevant nuclides. Cs-137 is one of these relevant isotopes. Its typical minimum detectable concentration is in the order of a few Bq/m3. However, this isotope is also known to occur in atmospheric trace concentrations, due to known non CTBT relevant processes and sources related to, for example, the re-suspension of cesium from historic nuclear tests and/or the Chernobyl reactor disaster, temporarily enhanced by bio-mass burning (Wotawa et al. 2006). Properly attributed cesium detections can be used as a proxy to detect Aeolian dust events (Igarashi et al, 2001) that potentially carry cesium from all aforementioned sources but are also known to play an important role for the radiative forcing in the atmosphere (shadow effect), at the surface (albedo) and the carbon dioxide cycle when interacting with oceanic phytoplankton (Mikami and Shi, 2005). In this context this paper provides a systematic attribution of recent Cs-137 detections in the PTS monitoring network in order to Characterize those stations which are regularly affected by Cs-137 Provide input for procedures that distinguish CTBT relevant detection from other sources (event screening) Explore on the capability of certain stations to use their Cs-137 detections as a proxy to detect aeolian dust events and to flag the belonging filters to be relevant for further investigations in this field (-> EGU-2009 Session CL16/AS4.6/GM10.1: Aeolian dust: initiator, player, and recorder of environmental change). References Igarashi, Y., M

  1. Preliminary fracture analysis of the core pressure boundary tube for the Advanced Neutron Source Research Reactor

    International Nuclear Information System (INIS)

    Schulz, K.C.

    1995-08-01

    The outer core pressure boundary tube (CPBT) of the Advanced neutron Source (ANS) reactor being designed at Oak Ridge National Laboratory is currently specified as being composed of 6061-T6 aluminum. ASME Boiler and Pressure Vessel Code fracture analysis rules for nuclear components are based on the use of ferritic steels; the expressions, tables, charts and equations were all developed from tests and analyses conducted for ferritic steels. Because of the nature of the Code, design with thin aluminum requires analytical approaches that do not directly follow the Code. The intent of this report is to present a methodology comparable to the ASME Code for ensuring the prevention of nonductile fracture of the CPBT in the ANS reactor. 6061-T6 aluminum is known to be a relatively brittle material; the linear elastic fracture mechanics (LEFM) approach is utilized to determine allowable flaw sizes for the CPBT. A J-analysis following the procedure developed by the Electric Power Research Institute was conducted as a check; the results matched those for the LEFM analysis for the cases analyzed. Since 6061-T6 is known to embrittle when irradiated, the reduction in K Q due to irradiation is considered in the analysis. In anticipation of probable requirements regarding maximum allowable flaw size, a survey of nondestructive inspection capabilities is also presented. A discussion of probabilistic fracture mechanics approaches, principally Monte Carlo techniques, is included in this report as an introduction to what quantifying the probability of nonductile failure of the CPBT may entail

  2. Cerebral angiography with prospective ECG triggering preliminary study of dual-source CT

    International Nuclear Information System (INIS)

    Xue Yuejun; Qian Nong; Shao Yanhui; Pan Changjie; Rong Weiliang; Xu Yiqun

    2012-01-01

    Objective: To study the image quality and radiation dose in dual-source CT cerebral angiography with prospective ECG-triggered sequence mode (step-and-shoot, SAS). Methods: A total of forty-three patients with clinically suspected cerebral vascular disease underwent cerebral CT angiography with prospective ECG-triggering (step-and-shoot, SAS). Data acquisition was at 60% R-R interval of the ECG presentation mode. The post-processing included maximum intensity projection (MIP), multiplanar reformation (MPR) and volume rendering (VR). The CTA image quality, radiation dose and rates of excellent images were evaluated. Results: The CTA image quality score was 4.72 ± 0.50 and 97.7% (42/43) patients had excellent CTA images. The average effective dose of SAS-CTA was (0.22 ± 0.01)mSv, which was lower by 76.31% than that of DE-CTA. Conclusions: Prospective ECG-triggering sequence could be used in cerebral angiography with a significant reduction in radiation dose and diagnostic image quality. (authors)

  3. A novel full scale experimental characterization of wind turbine aero-acoustic noise sources - preliminary results

    DEFF Research Database (Denmark)

    Aagaard Madsen, Helge; Bertagnolio, Franck; Fischer, Andreas

    2016-01-01

    of the blade and the noise on the ground in a distance of about one rotor diameter. In total six surface microphones were used to measure the SP at the leading edge (LE) and trailing edge (TE) of the blade. In parallel noise was measured by eight microphones placed on plates on the ground around the turbine......The paper describes a novel full scale experiment on a 500 kW wind turbine with the main objective to characterize the aero-acoustic noise sources. The idea behind the instrumentation is to study the link and correlation between the surface pressure (SP) fluctuations in the boundary layer...... in equidistant angles on a circle with a radius of about one rotor diameter. The data were analyzed in segments of 2.2 s which is the time for one rotor revolution. The spectra for the TE microphones on the suction side of the blade show a characteristic roll-off pattern around a frequency of 600-700 Hz...

  4. Preliminary study on preparation of BCNO phosphor particles using citric acid as carbon source

    Energy Technology Data Exchange (ETDEWEB)

    Nuryadin, Bebeh W.; Pratiwi, Tripuspita; Faryuni, Irfana D.; Iskandar, Ferry, E-mail: ferry@fi.itb.ac.id; Abdullah, Mikrajuddin; Khairurrijal [Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Ganesha 10 Bandung, Indonesia 40132 (Indonesia); Ogi, Takashi; Okuyama, Kikuo [Department of Chemical Engineering, Graduate School of Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi Hiroshima, Japan 739-8527 (Japan)

    2015-04-16

    A citric acid was used as a carbon source in the preparation of boron carbon oxy-nitride (BCNO) phosphor particles by a facile process. The preparation process was conducted at relatively low temperature 750 °C and at ambient pressure. The prepared BCNO phosphors showed a high photoluminescence (PL) performance at peak emission wavelength of 470 nm under excitation by a UV light 365 nm. The effects of carbon/boron and nitrogen/boron molar ratios on the PL properties were also investigated. The result showed that the emission spectra with a wavelength peak ranging from 444 nm to 496 nm can be obtained by varying carbon/boron ratios from 0.1 to 0.9. In addition, the observations showed that the BCNO phosphor material has two excitation peaks located at the 365 nm (UV) and 420 nm (blue). Based on these observations, we believe that the citric acid derived BCNO phosphor particles can be a promising inexpensive material for phosphor conversion-based white LED.

  5. Assessment of thoracic aortic elasticity: a preliminary study using electrocardiographically gated dual-source CT

    International Nuclear Information System (INIS)

    Li, Ning; Guo, Lijun; Sun, Haitao; Gao, Fei; Liu, Cheng; Beck, Thomas; Chen, Jiuhong; Biermann, Christina

    2011-01-01

    To gain a new insight into the elastic properties of the thoracic aorta in patients without aortic diseases using electrocardiographically (ECG)-gated dual-source (DS) CT. 56 subjects with no cardiovascular disease, selected from 2,700 people undergoing ECG-gated DSCT examination, were divided into three groups according to their age. CT data were reconstructed in 5% step throughout the RR interval. Diameter and area were measured at the curve of the ascending aorta (AA) and at the same level of the descending aorta (DA). The pulsation and elasticity of the aorta were evaluated. Aortic diameter changes were noted throughout the cardiac cycle. The maximum average diameter was seen at an RR interval of 24.02 ± 4.99% for the AA and 25.63 ± 4.77% for the DA. The minimum was at 93.5 ± 4.04% for the AA and 96.6 ± 4.58% for the DA. There was an age-dependent decrease in elasticity, while different correlation coefficients were found between various age groups and different elastic parameters. The properties of aortic pulsation and wall elasticity could be well shown by ECG-gated DSCT. The new findings regarding segment difference and age relevance were significant and should be taken into account in clinical trials and treatments for the elasticity related cardiovascular diseases. (orig.)

  6. A preliminary appraisal of sediment sources and transport in Kings Bay and vicinity, Georgia and Florida

    Science.gov (United States)

    McConnell, J.B.; Radtke, D.B.; Hale, T.W.; Buell, G.R.

    1983-01-01

    Water-quality, bottom-material, suspended-sediment, and current-velocity data were collected during November 1981 in Kings Bay and vicinity to provide information on the sources and transport of estuarine sediments. Kings Bay and Cumberland Sound , the site of the Poseidon Submarine Base in southeast Georgia, are experiencing high rates of sediment deposition and accumulation, which are causing serious navigational and operational problems. Velocity, bathymetry, turbidity, and bottom-material data suggest that the area in the vicinity of lower Kings Bay is accumulating deposits of suspended sediment transported from Cumberland Sound on the floodtide and from upper Kings Bay and the tidal marsh drained by Marianna Creek on the ebbtide. Suspended-sediment discharges computed for consecutive 13-hour ebbtides and floodtides showed that a net quantity of suspended sediment was transported seaward from upper Kings Bay and Marianna Creek. A net landward transport of suspended sediment computed at the St. Marys Entrance indicated areas seaward of St. Marys Entrance may be supplying sediment to the shoaling areas of the estuary, including lower Kings Bay. (USGS)

  7. Dual-source dual-energy CT for the differentiation of urinary stone composition: preliminary study

    International Nuclear Information System (INIS)

    Yang Qifang; Zhang Wanshi; Meng Limin; Shi Huiping; Wang Dong; Bi Yongmin; Li Xiangsheng; Fang Hong; Guo Heqing; Yan Jingmin

    2011-01-01

    Objective: To evaluate dual-source dual-energy CT (DSCT) for the differentiation of' urinary stone composition in vitro. Methods: Ninety-seven urinary stones were obtained by endoscopic lithotripsy and scanned using dual-source dual-energy CT. The stones were divided into six groups according to infrared spectroscopy stone analysis: uric acid (UA) stones (n=10), cystine stones (n=5), struvite stones (n=6), calcium oxalate (CaOx) stones (n=22), mixed UA stones (n=7) and mixed calcium stones (n=47). Hounsfield units (HU) of each stone were recorded for the 80 kV and the 140 kV datasets by hand-drawing method. HU difference, HU ratio and dual energy index (DEI) were calculated and compared among the stone groups with one-way ANOVA. Using dual energy software to determine the composition of all stones, results were compared to infrared spectroscopy analysis. Results: There were statistical differences in HU difference [(-17±13), (229±34), (309±45), (512±97), (201±64) and (530±71) HU respectively], in HU ratio (0.96±0.03, 1.34±0.04, 1.41±0.03, 1.47±0.03, 1.30±0.07, and 1.49±0.03 respectively), and DEI (-0.006±0.004, 0.064±0.007, 0.080± 0.007, 0.108±0.011, 0.055±0.014 and 0.112±0.008 respectively) among different stone groups (F= 124.894, 407.028, 322.864 respectively, P<0.01). There were statistical differences in HU difference, HU ratio and DEI between UA stones and the other groups (P<0.01). There were statistical differences in HU difference, HU ratio and DEI between CaOx or mixed calcium stones and the other four groups (P< 0.01). There was statistical difference in HU ratio between cystine and struvite stones (P<0.01). There were statistical differences in HU difference, HU ratio and DEI between struvite and mixed UA stones (P< 0.05). Dual energy software correctly characterized 10 UA stones, 4 cystine stones, 22 CaOx stones and 6 mixed UA stones. Two struvite stones were considered to contain cystine. One cystine stone, 1 mixed UA stone, 4

  8. Dual-source virtual non-contrast CT of the head: a preliminary study

    International Nuclear Information System (INIS)

    Huang Wei; Xu Yiming; Shao Jin

    2011-01-01

    Objective: To investigate image quality and clinical value of dual-source dual energy virtual non-contrast (VNC) CT of the head. Methods: Sixty-two patients suspected of cerebrovascular diseases underwent conventional non-contrast (CNC) CT and dual energy CTA examination of the head with dual-source CT. Virtual non-contrast images were reconstructed using dual energy software. The CT values of gray matter, white matter, cerebrospinal fluid, hyperdense hemorrhagic lesion and hypodense ischemic lesion were compared between CNC and VNC images. A four-score scale was used to assess image quality subjectively. Image noise, radiation dosage and detection rate were compared between CNC and VNC images. Paired t test, Wilcoxon signed ranks test and Chi-square test (McNemar test and Kappa test) were used. Results: The CT value on CNC and VNC images, were (43.3±1.5) and (33.2±1.3) HU for gray matter (t=46.98, P 0.05, Kappa = 1.000) at per-patient level. Twenty-two patients with hypodense ischemic lesions were found on VNC images with one false positive case and two false negative cases. The sensitivity, specificity, positive predictive value and negative predictive value were 91.3% (21/23), 97.4% (38/39), 95.5% (21/22) and 95.0% (38/40) respectively. No statistical difference was found in detecting hypodense lesions between VNC and CNC images (χ 2 = 0.00, P>0.05, Kappa = 0.895). In per-lesion analysis, 53 hemorrhage lesions were found on VNC images with false negative results of four lesions and no false positive result. The sensitivity, specificity, positive predictive value and negative predictive value were 93.0% (53/57). 100.0% (38/38), 100.0% (53/.53) and 90.5% (38/42) respectively. There was no significant difference in detection rate of hyperdense lesion between VNC and CNC images (χ 2 = 2.25, P>0.05, Kappa = 0.914). Thirty-eight hypodense lesions were found on VNC images with 2 false positive lesions and 13 false negative lesions. The sensitivity, specificity

  9. Elevated source SF6-tracer dispersion experiments in the Copenhagen area. Preliminary results II

    International Nuclear Information System (INIS)

    Gryning, S.E.; Lyck, E.

    1980-01-01

    The results from 10 experiments, performed in neutral to unstable meteorological conditions, are reported from an ongoing series of elevated-source, urban-scale tracer dispersion experiments in the Copenhagen area. The tracer is released at a height of 115 m from the TV-tower in GLADSAXE, a suburb of Copenhagen, with tracer sampling units positioned at ground-level in 1 to 3 crosswind series, 2 to 6 km downwind of the tower. The lateral dispersion parameter, sigma(y), was estimated from the measured tracer concentration distribution and compared with values of sigma(y), computed by 1) methods based on wind variance measured during the experiments and 2) methods based on a stability classification of the atmospheric conditions. The wind-variance based methods proved superior in predicting the variation of sigma(y) compared with the stability based methods. Moreover, some of the former methods produced significantly biased estimates of sigma(y). The measured tracer concentration distributions were also crosswind integrated, chi(CWI). Estimates of chi(CWI) were computed using sigma (z) -values derived from the aforementioned computations assuming a Gaussian-type vertical tracer concentration distribution. A comparison is measured and calculated values of chi(CWI) showed no significant differences in the ability of the methods to predict the variation of chi(CWI). Only one method, the EPA, came out with a mean fractional error outside the range +-20% which constitutes the uncertainty in the absolute tracer concentration associated with the calibration of the gas chromatograph for tracer analysis

  10. Cognitive and linguistic sources of variance in 2-year-olds’ speech-sound discrimination: a preliminary investigation.

    Science.gov (United States)

    Lalonde, Kaylah; Holt, Rachael Frush

    2014-02-01

    This preliminary investigation explored potential cognitive and linguistic sources of variance in 2-year-olds’ speech-sound discrimination by using the toddler change/ no-change procedure and examined whether modifications would result in a procedure that can be used consistently with younger 2-year-olds. Twenty typically developing 2-year-olds completed the newly modified toddler change/no-change procedure. Behavioral tests and parent report questionnaires were used to measure several cognitive and linguistic constructs. Stepwise linear regression was used to relate discrimination sensitivity to the cognitive and linguistic measures. In addition, discrimination results from the current experiment were compared with those from 2-year-old children tested in a previous experiment. Receptive vocabulary and working memory explained 56.6% of variance in discrimination performance. Performance was not different on the modified toddler change/no-change procedure used in the current experiment from in a previous investigation, which used the original version of the procedure. The relationship between speech discrimination and receptive vocabulary and working memory provides further evidence that the procedure is sensitive to the strength of perceptual representations. The role for working memory might also suggest that there are specific subject-related, nonsensory factors limiting the applicability of the procedure to children who have not reached the necessary levels of cognitive and linguistic development.

  11. The May 2012 Emilia (Italy earthquakes: preliminary interpretations on the seismogenic source and the origin of the coseismic ground effects

    Directory of Open Access Journals (Sweden)

    Alberto Pizzi

    2012-10-01

    Full Text Available On May 20, 2012, a Ml 5.9 earthquake (T1 occurred in the Emilia-Romagna Region of northern Italy. This was preceded by a Ml 4.1 foreshock on May 19, 2012, and followed by several aftershocks, including two Ml 5.1 events, both on the same day. On May 29, 2012, a second strong event of Ml 5.8 (T2 hit the same region, with its epicenter ca. 12 km to the WSW of the first mainshock, T1. The epicentral area of the seismic sequence covers an alluvial lowland that is occupied by both agricultural and urbanized areas, and there were 17 casualties and about 14,000 people left homeless. […] In the present study, we provide a preliminary model of the seismogenic source(s responsible for the two mainshocks, by comparing the seismic reflection profile interpretation with the available seismological and interferometric data. Furthermore, we show the coseismic ground effects that were observed in the epicentral area during two field survey campaigns: the first conducted after the May 20, 2012, event and the second soon after the May 29, 2012, earthquake, when several sites were revisited to observe the occurrence of newly formed or 're-activated' liquefaction features. Hence, we discuss the origin and location of the coseismic features observed in the context of the local geological–geomorphological setting and with respect to the epicentral distance. Finally, we provide our interpretation for the question: "Why did the mainshock ruptures not break the surface?" […

  12. Application of Molecular Typing Results in Source Attribution Models: The Case of Multiple Locus Variable Number Tandem Repeat Analysis (MLVA) of Salmonella Isolates Obtained from Integrated Surveillance in Denmark

    DEFF Research Database (Denmark)

    de Knegt, Leonardo; Pires, Sara Monteiro; Löfström, Charlotta

    2016-01-01

    , and antibiotic resistance profiles for the Salmonella source attribution, and assess the utility of the results for the food safety decisionmakers. Full and simplified MLVA schemes from surveillance data were tested, and model fit and consistency of results were assessed using statistical measures. We conclude...

  13. Human Campylobacteriosis in Luxembourg, 2010?2013: A Case-Control Study Combined with Multilocus Sequence Typing for Source Attribution and Risk Factor Analysis

    OpenAIRE

    Mossong, Jo?l; Mughini-Gras, Lapo; Penny, Christian; Devaux, Anthony; Olinger, Christophe; Losch, Serge; Cauchie, Henry-Michel; van Pelt, Wilfrid; Ragimbeau, Catherine

    2016-01-01

    Campylobacteriosis has increased markedly in Luxembourg during recent years. We sought to determine which Campylobacter genotypes infect humans, where they may originate from, and how they may infect humans. Multilocus sequence typing was performed on 1153 Campylobacter jejuni and 136 C. coli human strains to be attributed to three putative animal reservoirs (poultry, ruminants, pigs) and to environmental water using the asymmetric island model. A nationwide case-control study (2010?2013) for...

  14. Assessing the long-term probabilistic volcanic hazard for tephra fallout in Reykjavik, Iceland: a preliminary multi-source analysis

    Science.gov (United States)

    Tonini, Roberto; Barsotti, Sara; Sandri, Laura; Tumi Guðmundsson, Magnús

    2015-04-01

    Icelandic volcanism is largely dominated by basaltic magma. Nevertheless the presence of glaciers over many Icelandic volcanic systems results in frequent phreatomagmatic eruptions and associated tephra production, making explosive eruptions the most common type of volcanic activity. Jökulhlaups are commonly considered as major volcanic hazard in Iceland for their high frequency and potentially very devastating local impact. Tephra fallout is also frequent and can impact larger areas. It is driven by the wind direction that can change with both altitude and season, making impossible to predict a priori where the tephra will be deposited during the next eruptions. Most of the volcanic activity in Iceland occurs in the central eastern part, over 100 km to the east of the main population centre around the capital Reykjavík. Therefore, the hazard from tephra fallout in Reykjavík is expected to be smaller than for communities settled near the main volcanic systems. However, within the framework of quantitative hazard and risk analyses, less frequent and/or less intense phenomena should not be neglected, since their risk evaluation depends on the effects suffered by the selected target. This is particularly true if the target is highly vulnerable, as large urban areas or important infrastructures. In this work we present the preliminary analysis aiming to perform a Probabilistic Volcanic Hazard Assessment (PVHA) for tephra fallout focused on the target area which includes the municipality of Reykjavík and the Keflavík international airport. This approach reverts the more common perspective where the hazard analysis is focused on the source (the volcanic system) and it follows a multi-source approach: indeed, the idea is to quantify, homogeneously, the hazard due to the main hazardous volcanoes that could pose a tephra fallout threat for the municipality of Reykjavík and the Keflavík airport. PVHA for each volcanic system is calculated independently and the results

  15. The assessment of source attribution of soil pollution in a typical e-waste recycling town and its surrounding regions using the combined organic and inorganic dataset.

    Science.gov (United States)

    Luo, Jie; Qi, Shihua; Xie, Xianming; Gu, X W Sophie; Wang, Jinji

    2017-01-01

    Guiyu is a well-known electronic waste dismantling and recycling town in south China. Concentrations and distribution of the 21 mineral elements and 16 polycyclic aromatic hydrocarbons (PAHs) collected there were evaluated. Principal component analyses (PCA) applied to the data matrix of PAHs in the soil extracted three major factors explaining 85.7% of the total variability identified as traffic emission, coal combustion, and an unidentified source. By using metallic or metalloid element concentrations as variables, five principal components (PCs) were identified and accounted for 70.4% of the information included in the initial data matrix, which can be denoted as e-waste dismantling-related contamination, two different geological origins, anthropogenic influenced source, and marine aerosols. Combining the 21 metallic and metalloid element datasets with the 16 PAH concentrations can narrow down the coarse source and decrease the unidentified contribution to soil in the present study and therefore effectively assists the source identification process.

  16. Global-scale attribution of anthropogenic and natural dust sources and their emission rates based on MODIS Deep Blue aerosol products

    Science.gov (United States)

    Ginoux, Paul; Prospero, Joseph M.; Gill, Thomas E.; Hsu, N. Christina; Zhao, Ming

    2012-09-01

    Our understanding of the global dust cycle is limited by a dearth of information about dust sources, especially small-scale features which could account for a large fraction of global emissions. Here we present a global-scale high-resolution (0.1°) mapping of sources based on Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue estimates of dust optical depth in conjunction with other data sets including land use. We ascribe dust sources to natural and anthropogenic (primarily agricultural) origins, calculate their respective contributions to emissions, and extensively compare these products against literature. Natural dust sources globally account for 75% of emissions; anthropogenic sources account for 25%. North Africa accounts for 55% of global dust emissions with only 8% being anthropogenic, mostly from the Sahel. Elsewhere, anthropogenic dust emissions can be much higher (75% in Australia). Hydrologic dust sources (e.g., ephemeral water bodies) account for 31% worldwide; 15% of them are natural while 85% are anthropogenic. Globally, 20% of emissions are from vegetated surfaces, primarily desert shrublands and agricultural lands. Since anthropogenic dust sources are associated with land use and ephemeral water bodies, both in turn linked to the hydrological cycle, their emissions are affected by climate variability. Such changes in dust emissions can impact climate, air quality, and human health. Improved dust emission estimates will require a better mapping of threshold wind velocities, vegetation dynamics, and surface conditions (soil moisture and land use) especially in the sensitive regions identified here, as well as improved ability to address small-scale convective processes producing dust via cold pool (haboob) events frequent in monsoon regimes.

  17. Preliminary Tests of the DECRIS-4 Ion Source%DECRIS-4离子源的初步测试结果

    Institute of Scientific and Technical Information of China (English)

    V.Bekhterev; S.Bogomolov; A.Efremov; G.Gulbekian; Yu.Kostyukhov; A.Lebedev; M.Leporis; V.Loginov; N.Yazvitsky

    2007-01-01

    The ECR ion source DECRIS一4 has been designed and constructed at the FLNR JINR to be used as a second injector of heavy multiply charged ions for the U-400 cyclotron.The design of the magnetic structure of the source was based on the idea of the so-called"magnetic plateau".The axial magnetic field is formed by three independent solenoids enclosed in separated iron yokes.As a result the superposition of the coils and hexapole magnetic fields creates the enlarged resonance volume.The first experiments showed that the source was able to produce more than 300eμA of Ar8+ when only 100W of microwave power was used.During the last experiment almost 500eμA of Ar8+ was extracted with the same power.In this paper we will present the preliminary results with other gaseous ions,such as oxygen,krypton and xenon.

  18. Preliminary design of the cold neutron source for the Centro Atomico Bariloche Electron LINAC Facility. I. Solid benzene as moderating material

    International Nuclear Information System (INIS)

    Torres, Lourdes; Granada, Jose R.

    2004-01-01

    We present the results of preliminary calculations performed with the code MCNP-4C relative to the neutron field behavior within the moderator for the CAB-LINAC cold neutron source, using benzene at 89 K as moderating material. Throughout the design calculations nuclear data libraries previously generated and validated were used. The optimum dimensions for a slab and a grid moderator were calculated, with and without a pre moderator, from the point of view of neutron production and the time-width of the neutron pulse. (author)

  19. Preliminary design report of a relativistic-Klystron two-beam-accelerator based power source for a 1 TeV center-of-mass next linear collider

    International Nuclear Information System (INIS)

    Yu, S.; Goffeney, N.; Henestroza, E.

    1995-01-01

    A preliminary point design for an 11.4 GHz power source for a 1 TeV center-of-mass Next Linear Collider (NLC) based on the Relativistic-Klystron Two-Beam-Accelerator (RK-TBA) concept is presented. The present report is the result of a joint LBL-LLNL systems study. consisting of three major thrust areas: physics, engineering, and costing. The new RK-TBA point design, together with our findings in each of these areas, are reported

  20. Fugitive Methane Emission Identification and Source Attribution: Ethane-to-Methane Analysis Using a Portable Cavity Ring-Down Spectroscopy Analyzer

    Science.gov (United States)

    Kim-Hak, D.; Fleck, D.

    2017-12-01

    Natural gas analysis and methane specifically have become increasingly important by virtue of methane's 28-36x greenhouse warming potential compared to CO2 and accounting for 10% of total greenhouse gas emissions in the US alone. Additionally, large uncontrolled leaks, such as the recent one from Aliso Canyon in Southern California, originating from uncapped wells, storage facilities and coal mines have increased the total global contribution of methane missions even further. Determining the specific fingerprint of methane sources by quantifying the ethane to methane (C2:C1) ratios provides us with means to understand processes yielding methane and allows for sources of methane to be mapped and classified through these processes; i.e. biogenic or thermogenic, oil vs. gas vs. coal gas-related. Here we present data obtained using a portable cavity ring-down spectrometry analyzer weighing less than 25 lbs and consuming less than 35W that simultaneously measures methane and ethane in real-time with a raw 1-σ precision of plane gas propagation.

  1. Make-up of injector test stand (ITS-1) and preliminary results with Model-I ion source

    International Nuclear Information System (INIS)

    Matsuda, S.; Ito, T.; Kondo, U.; Ohara, Y.; Oga, T.; Shibata, T.; Shirakata, H.; Sugawara, T.; Tanaka, S.

    Constitution of the 1-st injector test stand (ITS-1) in the Thermonuclear Division, JAERI, and the performance of the Model-I ion source are described. Heating a plasma by neutral beam injection is one of the promising means in the thermonuclear fusion devices. Purpose of the test stand is to develop the ion sources used in such injection systems. The test stand was completed in February 1975, which is capable of testing the ion sources up to 12 amps at 30 kV. A hydrogen ion beam of 5.5 amps at 25 kV was obtained in the Model-I ion source

  2. Mathematicians, Attributional Complexity, and Gender

    Science.gov (United States)

    Stalder, Daniel R.

    Given indirect indications in sex role and soda! psychology research that mathematical-deductive reasoning may negatively relate to social acuity, Study 1 investigated whether mathematicians were less attributionally complex than nonmathematicians. Study 1 administered the Attributional Complexity Scale, a measure of social acuity, to female and male faculty members and graduate students in four Midwestern schools. Atlrihutional complexity (AC) is the ability and motivation to give complex explanations for behavior. Study 1 found a significant interaction between field and gender. Only among women did mathematicians score lower on AC. In addition, an established gender difference in AC (that women score higher than men) was present only among nonmathematicians. Studies 2 and 3 offered some preliminary support for the possibility that it is generally female students who score tow on AC who aspire to he mathematicians and for the underlying view that female students' perceived similarity to mathematicians can influence their vocational choices.

  3. Enhancing the water management schemes of H08 global hydrological model to attribute human water use to six major water sources

    Science.gov (United States)

    Hanasaki, N.; Yoshikawa, S.; Pokhrel, Y. N.; Kanae, S.

    2017-12-01

    Humans abstract water from various sources to sustain their livelihood and society. Some global hydrological models (GHMs) include explicit schemes of human water management, but the representation and performance of these schemes remain limited. We substantially enhanced the human water management schemes of the H08 GHM by incorporating the latest data and techniques. The model enables us to estimate water abstraction from six major water sources, namely, river flow regulated by global reservoirs (i.e., reservoirs regulating the flow of the world's major rivers), aqueduct water transfer, local reservoirs, seawater desalination, renewable groundwater, and nonrenewable groundwater. All the interactions were simulated in a single computer program and the water balance was always strictly closed at any place and time during the simulation period. Using this model, we first conducted a historical global hydrological simulation at a spatial resolution of 0.5 x 0.5 degree to specify the sources of water for humanity. The results indicated that, in 2000, of the 3628 km3yr-1 global freshwater requirement, 2839 km3yr-1 was taken from surface water and 789 km3yr-1 from groundwater. Streamflow, aqueduct water transfer, local reservoirs, and seawater desalination accounted for 1786, 199, 106, and 1.8 km3yr-1 of the surface water, respectively. The remaining 747 km3yr-1 freshwater requirement was unmet, or surface water was not available when and where it was needed in our simulation. Renewable and nonrenewable groundwater accounted for 607 and 182 km3yr-1 of the groundwater total, respectively. Second, we evaluated the water stress using our simulations and contrasted it with earlier global assessments based on empirical water scarcity indicators, namely, the Withdrawal to Availability ratio and the Falkenmark index (annual renewable water resources per capita). We found that inclusion of water infrastructures in our model diminished water stress in some parts of the world, on

  4. Source attribution and interannual variability of Arctic pollution in spring constrained by aircraft (ARCTAS, ARCPAC and satellite (AIRS observations of carbon monoxide

    Directory of Open Access Journals (Sweden)

    J. A. Fisher

    2010-02-01

    Full Text Available We use aircraft observations of carbon monoxide (CO from the NASA ARCTAS and NOAA ARCPAC campaigns in April 2008 together with multiyear (2003–2008 CO satellite data from the AIRS instrument and a global chemical transport model (GEOS-Chem to better understand the sources, transport, and interannual variability of pollution in the Arctic in spring. Model simulation of the aircraft data gives best estimates of CO emissions in April 2008 of 26 Tg month−1 for Asian anthropogenic, 9.4 for European anthropogenic, 4.1 for North American anthropogenic, 15 for Russian biomass burning (anomalously large that year, and 23 for Southeast Asian biomass burning. We find that Asian anthropogenic emissions are the dominant source of Arctic CO pollution everywhere except in surface air where European anthropogenic emissions are of similar importance. Russian biomass burning makes little contribution to mean CO (reflecting the long CO lifetime but makes a large contribution to CO variability in the form of combustion plumes. Analysis of two pollution events sampled by the aircraft demonstrates that AIRS can successfully observe pollution transport to the Arctic in the mid-troposphere. The 2003–2008 record of CO from AIRS shows that interannual variability averaged over the Arctic cap is very small. AIRS CO columns over Alaska are highly correlated with the Ocean Niño Index, suggesting a link between El Niño and Asian pollution transport to the Arctic. AIRS shows lower-than-average CO columns over Alaska during April 2008, despite the Russian fires, due to a weakened Aleutian Low hindering transport from Asia and associated with the moderate 2007–2008 La Niña. This suggests that Asian pollution influence over the Arctic may be particularly large under strong El Niño conditions.

  5. Environmental radioactivity in Caithness and Sutherland. Pt. 1: Food-chain model validation and the attribution of radionuclide sources to deposition

    International Nuclear Information System (INIS)

    Rose, C.L.; Halliwell, C.M.

    1995-01-01

    This study is part of a continuing programme investigating the behaviour of environmental radioactivity in the vicinity of the AEA Technology establishment at Dounreay, Caithness and Sutherland. The study aims were to assess the applicability of a National Radiological Protection Board (NRPB) food-chain model to the Caithness and Sutherland area, and to determine the contribution of different radionuclide sources to activities in measured total deposition in the same region. The NRPB model predicts the movement of radionuclides through the food-chain, and in this study was validated by comparing model outputs with measured crop data (ryegrass and clover). Five radionuclides ( 137 Cs, 90 Sr, 239+240 Pu, 238 Pu, 241 Am) were considered. The contribution of different radionuclide sources to activities in total deposition were divided into three categories: Dounreay stack inputs, sea-to-land transfer, and the combined contribution from nuclear weapons testing and Chernobyl fallout. The analyses indicated that the contribution of the Dounreay stack to total deposition was very small for the radionuclides studied. The Chernobyl accident made a large impact on the total deposition of 137 Cs in the study area, and 90 Sr deposition was also affected by this, but to a much lesser extent. The Chernobyl accident appeared to have no effect on total Pu deposition in the region. The cessation of nuclear weapons testing and the length of time since Chernobyl meant that actual 137 Cs and 90 Sr deposition as a result of weapons/Chernobyl inputs had reached a low level by the end of the study period (summer 1987). It became evident that a contribution to total deposition was being made by additional factors, thought to be local resuspension of large particles for 137 Cs, and possibly deposition of plant material for 90 Sr. For Pu, sea-to-land transfer was probably an important contributor at coastal sites. (Author)

  6. Preliminary MCNP-POLIMI Simulations for the Evaluation of the ''Floor Effect'' Comparison of APSTNG and Cf Sources

    CERN Document Server

    Pozzi, S A

    2002-01-01

    The present simulations performed with the Monte Carlo code MCNP-POLIMI [1] have the scope of evaluating the associated-particle sealed tube neutron generator (APSTNG) for use as an interrogation source in the source-driven noise analysis method for the assay of nuclear materials. In the Nuclear Materials Identification System (NMIS) developed at the Oak Ridge National Laboratory, the time dependent cross-correlation of the timed neutron source and detector responses is one of the signatures acquired. Previous studies and measurements have demonstrated the sensitivity of this and other related signatures to fissile mass [2-3]. In a recent report [4], we outlined the advantages of the APSTNG interrogation source for use with NMIS when compared with the Cf-252 source. In particular, we showed that when the distance between the source and the sample and the sample and the detectors is large, the APSTNG source outperforms the Cf-252 in sensitivity to fissile mass. This is the case when performing measurements of ...

  7. Preparation of 3-7 MeV neutron source and preliminary results of activation cross section measurement

    Energy Technology Data Exchange (ETDEWEB)

    Furuta, T.; Masuda, T.; Tsurita, Y.; Hashimoto, A.; Miyajima, N. [Department of Nuclear Engineering, Nagoya University, Nagoya, Aichi (Japan); Sakane, H.; Shibata, M.; Yamamoto, H.; Kawade, K.

    1999-03-01

    A d-D gas target producing monoenergetic neutrons has been constructed for measurement of activation cross sections in the energy region of 3 to 7 MeV at Van de Graaff accelerator of Nagoya University. Neutron spectra and neutron fluxes were measured as a function of the incident deuteron energy. Preliminary results of activation cross sections were obtained for reactions {sup 27}Al(n, p){sup 27}Mg, {sup 27}Al(n, {alpha}){sup 24}Na, {sup 47}Ti(n, p){sup 47}Sc, {sup 56}Fe(n, p){sup 56}Mn, {sup 58}Ni(n, p){sup 58}Co and {sup 64}Zn(n, p){sup 64}Cu. The results are compared with the evaluated values of JENDL-3.2. A well-type HPGe detector was used for highly efficient detection. (author)

  8. Source Water Identification and Chemical Typing for Nitrogen at the Kissimmee River, Pool C, Florida--Preliminary Assessment

    National Research Council Canada - National Science Library

    Phelps, G. G

    2002-01-01

    As part of the South Florida Water Management District's Ground Water-Surface Water Interactions Study, a project was undertaken to identify the ages and sources of water in the area of Pool C, Kissimmee River, Florida...

  9. Measurements of volatile organic compounds at a suburban ground site (T1 in Mexico City during the MILAGRO 2006 campaign: measurement comparison, emission ratios, and source attribution

    Directory of Open Access Journals (Sweden)

    D. M. Bon

    2011-03-01

    Full Text Available Volatile organic compound (VOC mixing ratios were measured with two different instruments at the T1 ground site in Mexico City during the Megacity Initiative: Local and Global Research Observations (MILAGRO campaign in March of 2006. A gas chromatograph with flame ionization detector (GC-FID quantified 18 light alkanes, alkenes and acetylene while a proton-transfer-reaction ion-trap mass spectrometer (PIT-MS quantified 12 VOC species including oxygenated VOCs (OVOCs and aromatics. A GC separation system was used in conjunction with the PIT-MS (GC-PIT-MS to evaluate PIT-MS measurements and to aid in the identification of unknown VOCs. The VOC measurements are also compared to simultaneous canister samples and to two independent proton-transfer-reaction mass spectrometers (PTR-MS deployed on a mobile and an airborne platform during MILAGRO. VOC diurnal cycles demonstrate the large influence of vehicle traffic and liquid propane gas (LPG emissions during the night and photochemical processing during the afternoon. Emission ratios for VOCs and OVOCs relative to CO are derived from early-morning measurements. Average emission ratios for non-oxygenated species relative to CO are on average a factor of ~2 higher than measured for US cities. Emission ratios for OVOCs are estimated and compared to literature values the northeastern US and to tunnel studies in California. Positive matrix factorization analysis (PMF is used to provide insight into VOC sources and processing. Three PMF factors were distinguished by the analysis including the emissions from vehicles, the use of liquid propane gas and the production of secondary VOCs + long-lived species. Emission ratios to CO calculated from the results of PMF analysis are compared to emission ratios calculated directly from measurements. The total PIT-MS signal is summed to estimate the fraction of identified versus unidentified VOC species.

  10. Measurements of volatile organic compounds at a suburban ground site (T1) in Mexico City during the MILAGRO 2006 campaign: Measurement comparison, emission ratios, and source attribution

    Energy Technology Data Exchange (ETDEWEB)

    Bon, D.M.; Springston, S.; M.Ulbrich, I.; de Gouw, J. A.; Warneke, C.; Kuster, W. C.; Alexander, M. L.; Baker, A.; Beyersdorf, A. J.; Blake, D.; Fall, R.; Jimenez, J. L., Herndon, S. C.; Huey, L. G.; Knighton, W. B.; Ortega, J.; Vargas, O.

    2011-03-16

    Volatile organic compound (VOC) mixing ratios were measured with two different instruments at the T1 ground site in Mexico City during the Megacity Initiative: Local and Global Research Observations (MILAGRO) campaign in March of 2006. A gas chromatograph with flame ionization detector (GC-FID) quantified 18 light alkanes, alkenes and acetylene while a proton-transfer-reaction ion-trap mass spectrometer (PIT-MS) quantified 12 VOC species including oxygenated VOCs (OVOCs) and aromatics. A GC separation system was used in conjunction with the PIT-MS (GC-PIT-MS) to evaluate PIT-MS measurements and to aid in the identification of unknown VOCs. The VOC measurements are also compared to simultaneous canister samples and to two independent proton-transfer-reaction mass spectrometers (PTR-MS) deployed on a mobile and an airborne platform during MILAGRO. VOC diurnal cycles demonstrate the large influence of vehicle traffic and liquid propane gas (LPG) emissions during the night and photochemical processing during the afternoon. Emission ratios for VOCs and OVOCs relative to CO are derived from early-morning measurements. Average emission ratios for non-oxygenated species relative to CO are on average a factor of {approx}2 higher than measured for US cities. Emission ratios for OVOCs are estimated and compared to literature values the northeastern US and to tunnel studies in California. Positive matrix factorization analysis (PMF) is used to provide insight into VOC sources and processing. Three PMF factors were distinguished by the analysis including the emissions from vehicles, the use of liquid propane gas and the production of secondary VOCs + long-lived species. Emission ratios to CO calculated from the results of PMF analysis are compared to emission ratios calculated directly from measurements. The total PIT-MS signal is summed to estimate the fraction of identified versus unidentified VOC species.

  11. Sources

    International Nuclear Information System (INIS)

    Duffy, L.P.

    1991-01-01

    This paper discusses the sources of radiation in the narrow perspective of radioactivity and the even narrow perspective of those sources that concern environmental management and restoration activities at DOE facilities, as well as a few related sources. Sources of irritation, Sources of inflammatory jingoism, and Sources of information. First, the sources of irritation fall into three categories: No reliable scientific ombudsman to speak without bias and prejudice for the public good, Technical jargon with unclear definitions exists within the radioactive nomenclature, and Scientific community keeps a low-profile with regard to public information. The next area of personal concern are the sources of inflammation. This include such things as: Plutonium being described as the most dangerous substance known to man, The amount of plutonium required to make a bomb, Talk of transuranic waste containing plutonium and its health affects, TMI-2 and Chernobyl being described as Siamese twins, Inadequate information on low-level disposal sites and current regulatory requirements under 10 CFR 61, Enhanced engineered waste disposal not being presented to the public accurately. Numerous sources of disinformation regarding low level radiation high-level radiation, Elusive nature of the scientific community, The Federal and State Health Agencies resources to address comparative risk, and Regulatory agencies speaking out without the support of the scientific community

  12. Schroedinger’s Code: A Preliminary Study on Research Source Code Availability and Link Persistence in Astrophysics

    Science.gov (United States)

    Allen, Alice; Teuben, Peter J.; Ryan, P. Wesley

    2018-05-01

    We examined software usage in a sample set of astrophysics research articles published in 2015 and searched for the source codes for the software mentioned in these research papers. We categorized the software to indicate whether the source code is available for download and whether there are restrictions to accessing it, and if the source code is not available, whether some other form of the software, such as a binary, is. We also extracted hyperlinks from one journal’s 2015 research articles, as links in articles can serve as an acknowledgment of software use and lead to the data used in the research, and tested them to determine which of these URLs are still accessible. For our sample of 715 software instances in the 166 articles we examined, we were able to categorize 418 records as according to whether source code was available and found that 285 unique codes were used, 58% of which offered the source code for download. Of the 2558 hyperlinks extracted from 1669 research articles, at best, 90% of them were available over our testing period.

  13. [Preliminary study of source apportionment of PM10 and PM2.5 in three cities of China during spring].

    Science.gov (United States)

    Gao, Shen; Pan, Xiao-chuan; Madaniyazi, Li-na; Xie, Juan; He, Ya-hui

    2013-09-01

    To study source apportionment of atmospheric PM10 (particle matter ≤ 10 µm in aerodynamic diameter) and PM2.5 (particle matter ≤ 2.5 µm in aerodynamic diameter) in Beijing,Urumqi and Qingdao, China. The atmospheric particle samples of PM10 and PM2.5 collected from Beijing between May 17th and June 18th, 2005, from Urumqi between April 20th and June 1st, 2006 and from Qingdao between April 4th and May 15th, 2005, were detected to trace the source apportionment by factor analysis and enrichment factor methods. In Beijing, the source apportionment results derived from factor analysis model for PM10 were construction dust and soil sand dust (contributing rate of variance at 45.35%), industry dust, coal-combusted smoke and vehicle emissions (contributing rate at 31.83%), and biomass burning dust (13.57%). The main pollution element was Pb, while the content (median (minimum value-maximum value)was 0.216 (0.040-0.795) µg/m(3)) . As for PM2.5, the sources were construction dust and soil sand dust (38.86%), industry dust, coal-combusted smoke and vehicle emissions (25.73%), biomass burning dust (13.10%) and burning oil dust (11.92%). The main pollution element was Zn (0.365(0.126-0.808) µg/m(3)).In Urumqi, source apportionment results for PM10 were soil sand dust and coal-combusted dust(49.75%), industry dust, vehicle emissions and secondary particles dust (30.65%). The main characteristic pollution element was Cd (0.463(0.033-1.351) ng/m(3)). As for PM2.5, the sources were soil sand dust and coal-combusted dust (43.26%), secondary particles dust (22.29%), industry dust and vehicle emissions (20.50%). The main characteristic pollution element was As (14.599 (1.696-36.741) µg/m(3)).In Qingdao, source apportionment results for PM10 were construction dust (30.91%), vehicle emissions and industry dust (29.65%) and secondary particles dust (28.99%). The main characteristic pollution element was Pb (64.071 (5.846-346.831) µg/m(3)). As for PM2.5, the sources were

  14. Localization of epileptogenic zones in Lennox–Gastaut syndrome using frequency domain source imaging of intracranial electroencephalography: a preliminary investigation

    International Nuclear Information System (INIS)

    Cho, Jae-Hyun; Jung, Young-Jin; Kim, Jeong-Youn; Im, Chang-Hwan; Kang, Hoon-Chul; Kim, Heung Dong; Yoon, Dae Sung; Lee, Yong-Ho

    2013-01-01

    Although intracranial electroencephalography (iEEG) has been widely used to localize epileptogenic zones in epilepsy, visual inspection of iEEG recordings does not always result in a favorable surgical outcome, especially in secondary generalized epilepsy such as Lennox–Gastaut syndrome (LGS). Various computational iEEG analysis methods have recently been introduced to confirm the visual inspection results. Of these methods, high gamma oscillation in iEEG has attracted interest because a series of studies have reported a close relationship between epileptogenic zones and cortical areas with high gamma oscillation. Meanwhile, frequency domain source imaging of EEG and MEG oscillations has proven to be a useful auxiliary tool for identifying rough locations of epileptogenic zones. To the best of our knowledge, however, frequency domain source imaging of high gamma iEEG oscillations has not been studied. In this study, we investigated whether the iEEG-based frequency domain source imaging of high gamma oscillation (60–100 Hz) would be a useful supplementary tool for identifying epileptogenic zones in patients with secondary generalized epilepsy. The method was applied to three successfully operated on LGS patients, whose iEEG contained some ictal events with distinct high gamma oscillations before seizure onset. The resultant cortical source distributions were compared with surgical resection areas and with high gamma spectral power distributions on the intracranial sensor plane. While the results of the sensor-level analyses contained many spurious activities, the results of frequency domain source imaging coincided better with the surgical resection areas, suggesting that the frequency domain source imaging of iEEG high gamma oscillations might help enhance the accuracy of pre-surgical evaluations of patients with secondary generalized epilepsy. (paper)

  15. Preliminary assessment of Miramar Petrochemical Harbor as PAH source to Guajará bay (Belém-PA-Brazil surface sediments

    Directory of Open Access Journals (Sweden)

    Silvana do Socorro Veloso Sodré

    Full Text Available Abstract A preliminary study on a petrochemical harbor as a potential source of polycyclic aromatic hydrocarbons (PAH to surface sediments of Guajará bay, located in Belém City, Pará State, Brazil, over the last 10 years is presented here. The 16 priority USEPA PAH were identified and quantified. Surface sediment samples, collected at 5 sites in the bay, near Miramar Petrochemical Harbor (TEMIR, were extracted and analyzed by high performance liquid chromatography with a diode array detector. Total PAH concentration ranged from 533.0 to 3123.3 ng g-1 dry weight with a mean concentration of 1091.9 ng g-1. The most contaminated places were those where muddy sediments were found with highest concentrations of organic matter. The priority PAH with low molecular weight represented 54.4% of the total abundance and indicate that the main source of contamination of the sediments was petrogenic, indicative of the relevant contribution of the petrochemical harbor activity to the input of PAH to Guajará bay. However, pyrolytic PAH coming from fuel combustion, household waste combustion and untreated sewage discharge are also potential contamination sources to this environment.

  16. Sources and behavior of perchlorate ions (ClO4-) in chalk aquifer of Champagne-Ardenne, France: preliminary results

    Science.gov (United States)

    Cao, Feifei; Jaunat, Jessy; Ollivier, Patrick; Cancès, Benjamin; Morvan, Xavier; Hubé, Daniel; Devos, Alain; Devau, Nicolas; Barbin, Vincent; Pannet, Pierre

    2018-06-01

    Perchlorate (ClO4-) is an environmental contaminant of growing concern due to its potential human health effects and widespread occurrence in surface water and groundwater. Analyses carried out in France have highlighted the presence of ClO4- in drinking water of Champagne-Ardenne (NW of France), with two potential sources suspected: a military source related to the First World War and an agricultural source related to the past use of Chilean nitrates. To determine the sources of ClO4- in groundwater, major and trace elements, 2H and 18O, ClO3- and ClO4- ions and a list of 39 explosives were analyzed from 35 surface water and groundwater sampling points in the east of the city of Reims. ClO4- ions were found in almost all sampling points (32 out of 35) with a max value of 33 µg L-1. ClO4- concentrations were highest in groundwater ranging from 0.7 to 33 µg L-1 (average value of about 6.2 µg L-1) against from 4 µg L-1) were collected near a military camp, where huge quantities of ammunitions have been used, stored and destroyed during and after the First World War.

  17. A preliminary nationwide survey of the presence of emerging contaminants in drinking and source waters in Brazil.

    Science.gov (United States)

    Machado, Kelly C; Grassi, Marco Tadeu; Vidal, Cristiane; Pescara, Igor C; Jardim, Wilson F; Fernandes, Andreia N; Sodré, Fernando F; Almeida, Fernanda V; Santana, Joyce S; Canela, Maria Cristina; Nunes, Camila R O; Bichinho, Kátia M; Severo, Flaviana J R

    2016-12-01

    This is the first nationwide survey of emerging contaminants in Brazilian waters. One hundred drinking water samples were investigated in 22 Brazilian state capitals. In addition, seven source water samples from two of the most populous regions of the country were evaluated. Samples were collected from June to September of 2011 and again during the same period in 2012. The study covered emerging contaminants of different classes, including hormones, plasticizers, herbicides, triclosan and caffeine. The analytical method for the determination of the compounds was based on solid-phase extraction followed by analysis via liquid chromatography electrospray triple-quadrupole mass spectrometry (LC-MS/MS). Caffeine, triclosan, atrazine, phenolphthalein and bisphenol A were found in at least one of the samples collected in the two sampling campaigns. Caffeine and atrazine were the most frequently detected substances in both drinking and source water. Caffeine concentrations in drinking water ranged from 1.8ngL -1 to values above 2.0μgL -1 while source-water concentrations varied from 40ngL -1 to about 19μgL -1 . For atrazine, concentrations were found in the range from 2.0 to 6.0ngL -1 in drinking water and at concentrations of up to 15ngL -1 in source water. The widespread presence of caffeine in samples of treated water is an indication of the presence of domestic sewage in the source water, considering that caffeine is a compound of anthropogenic origin. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. sources

    Directory of Open Access Journals (Sweden)

    Shu-Yin Chiang

    2002-01-01

    Full Text Available In this paper, we study the simplified models of the ATM (Asynchronous Transfer Mode multiplexer network with Bernoulli random traffic sources. Based on the model, the performance measures are analyzed by the different output service schemes.

  19. Design and preliminary characterization of a miniature pulsed RF APGD torch with downstream injection of the source of reactive species

    International Nuclear Information System (INIS)

    Leveille, V; Coulombe, S

    2005-01-01

    The design of a miniature low-power atmospheric pressure glow discharge torch (APGD-t) and the results of its preliminary electrical and spectroscopic characterization are presented. A capacitively-coupled pulsed RF (13.56 MHz) helium plasma jet is formed in a converging confinement tube and O 2 is injected downstream in the plasma afterglow region through a capillary electrode. With 1 SLM He, the APGD-t produced a non-thermal plasma jet of 500 μm-diameter and ∼2.5 mm-long at power levels ranging from 1 to 5 W. At ∼1 W, the gas temperature and He excitation temperature near the nozzle exit were ∼50 0 C and slightly below 2000 K, respectively. The breakdown voltage in 1 SLM He is approximately 220 V pk-to-0 . Careful electric probe measurements and circuit analysis revealed the strong effect of the voltage probe on the total load impedance. The injection of 10 SCCM O 2 through the capillary electrode led to the transport of atomic O further downstream in the plasma jet and to a slight increase of the He excitation temperature without significant effects on the electrical properties and jet length. Alternatively, the addition of an equivalent amount of O 2 (1 v/v%) to the plasma-forming gas affected the electrical properties slightly, but led to a drastic contraction of the plasma jet. The atomic oxygen production and transport conditions provided by the APGD-t are promising for precise bio-applications such as the treatment of skin tissues and cells

  20. A preliminary assessment of the spatial sources of contemporary suspended sediment in the Ohio River basin, United States, using water quality data from the NASQAN programme in a source tracing procedure

    Science.gov (United States)

    Zhang, Y.-S.; Collins, A.L.; Horowitz, A.J.

    2012-01-01

    Reliable information on catchment scale suspended sediment sources is required to inform the design of management strategies for helping abate the numerous environmental issues associated with enhanced sediment mobilization and off-site loadings. Since sediment fingerprinting techniques avoid many of the logistical constraints associated with using more traditional indirect measurement methods at catchment scale, such approaches have been increasingly reported in the international literature and typically use data sets collected specifically for sediment source apportionment purposes. There remains scope for investigating the potential for using geochemical data sets assembled by routine monitoring programmes to fingerprint sediment provenance. In the United States, routine water quality samples are collected as part of the US Geological Survey's revised National Stream Quality Accounting Network programme. Accordingly, the geochemistry data generated from these samples over a 10-year period (1996-2006) were used as the basis for a fingerprinting exercise to assess the key tributary sub-catchment spatial sources of contemporary suspended sediment transported by the Ohio River. Uncertainty associated with the spatial source estimates was quantified using a Monte Carlo approach in conjunction with mass balance modelling. Relative frequency weighted means were used as an alternative way of summarizing the spatial source contributions, thereby avoiding the need to use confidence limits. The results should be interpreted in the context of the routine, but infrequent nature, of the suspended sediment samples used to assemble geochemistry as a basis for the sourcing exercise. Nonetheless, the study demonstrates how routine monitoring samples can be used to provide some preliminary information on sediment provenance in large drainage basins. ?? 2011 John Wiley & Sons, Ltd.

  1. Distribution of organic carbon and petroleum source rock potential of Cretaceous and lower Tertiary carbonates, South Florida Basin: preliminary results

    Science.gov (United States)

    Palacas, James George

    1978-01-01

    Analyses of 134 core samples from the South Florida Basin show that the carbonates of Comanchean age are relatively richer in average organic carbon (0.41 percent) than those of Coahuilan age (0.28 percent), Gulfian age (0.18 percent) and Paleocene age (0.20 percent). They are also nearly twice as rich as the average world, wide carbonate (average 0.24 percent). The majority of carbonates have organic carbons less than 0.30 percent but the presence of many relatively organic rich beds composed of highly bituminous, argillaceous, highly stylolitic, and algal-bearing limestones and dolomites accounts for the higher percentage of organic carbon in some of the stratigraphic units. Carbonate rocks that contain greater than 0.4 percent organic carbon and that might be considered as possible petroleum sources were noted in almost each subdivision of the Coahuilan and Comanchean Series but particularly the units of Fredericksburg 'B', Trinity 'A', Trinity 'F', and Upper Sunniland. Possible source rocks have been ascribed by others to the Lower Sunniland, but lack of sufficient samples precluded any firm assessment in this initial report. In the shallower section of the basin, organic-rich carbonates containing as much as 3.2 percent organic carbon were observed in the lowermost part of the Gulfian Series and carbonate rocks with oil staining or 'dead' and 'live oil' were noted by others in the uppermost Gulfian and upper Cedar Keys Formation. It is questionable whether these shallower rocks are of sufficient thermal maturity to have generated commercial oil. The South Florida basin is still sparsely drilled and produces only from the Sunniland Limestone at an average depth of 11,500 feet (3500 m). Because the Sunniland contains good reservoir rocks and apparently adequate source rocks, and because the success rate of new oil field discoveries has increased in recent years, the chances of finding additional oil reserves in the Sunniland are promising. Furthermore, the

  2. Preliminary assessment of the nuclide migration from the activation zone around the proposed Spallation Neutron Source facility

    International Nuclear Information System (INIS)

    Dole, L.R.

    1998-09-01

    The purpose of this study is to investigate the potential impacts of migrating radionuclides from the activation zone around the proposed Spallation Neutron Source (SNS). Using conservatively high estimates of the potential inventory of radioactive activation products that could form in the proposed compacted-soil shield berm around an SNS facility on the Oak Ridge Reservation (ORR), a conservative, simplified transport model was used to estimate the potential worst-case concentrations of the 12 long-lived isotopes in the groundwater under a site with the hydrologic characteristics of the ORR

  3. Preliminary design and optimization of a G-band extended interaction oscillator based on a pseudospark-sourced electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Y., E-mail: yong.yin@strath.ac.uk, E-mail: yinyong@uestc.edu.cn [School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054 (China); Department of Physics, Scottish Universities Physics Alliance, University of Strathclyde, Glasgow G4 0NG (United Kingdom); He, W.; Zhang, L.; Yin, H.; Cross, A. W. [Department of Physics, Scottish Universities Physics Alliance, University of Strathclyde, Glasgow G4 0NG (United Kingdom)

    2015-07-15

    The design and simulation of a G-band extended interaction oscillator (EIO) driven by a pseudospark-sourced electron beam is presented. The characteristic of the EIO and the pseudospark-based electron beam were studied to enhance the performance of the newly proposed device. The beam-wave interaction of the EIO can be optimized by choosing a suitable pseudospark discharging voltage and by widening the operating voltage region of the EIO circuit. Simulation results show that a peak power of over 240 W can be achieved at G-band using a pseudospark discharge voltage of 41 kV.

  4. Preliminary assessment of the nuclide migration from the activation zone around the proposed Spallation Neutron Source facility

    Energy Technology Data Exchange (ETDEWEB)

    Dole, L.R.

    1998-09-01

    The purpose of this study is to investigate the potential impacts of migrating radionuclides from the activation zone around the proposed Spallation Neutron Source (SNS). Using conservatively high estimates of the potential inventory of radioactive activation products that could form in the proposed compacted-soil shield berm around an SNS facility on the Oak Ridge Reservation (ORR), a conservative, simplified transport model was used to estimate the potential worst-case concentrations of the 12 long-lived isotopes in the groundwater under a site with the hydrologic characteristics of the ORR.

  5. Ratio of thyroid radioiodine uptake calculated via the physic decay rate of the standard radioactive source: a preliminary study

    International Nuclear Information System (INIS)

    Zeng Yu; Zhou Luyi

    2010-01-01

    Objectives: To compare the difference of the ratio of thyroid radioiodine ( 131 I) uptake calculated by actually measuring counts of the standard radioactive source(method 1) and by computing counts of the standard radioactive source via physic half life of 131 I (method 2). Methods: Two hundred and nine consecutive patients with Graves' Disease were prospectively recruited. The ratio of thyroid 131 I uptake was calculated by two methods at 4 h and 24 h after administration of 1.48 MBq 131 I, respectively. Paired t-test was used to compare the difference between the two methods. Results: The ratio of thyroid 131 I uptake at 4h was (32±16)% and ( 35±10)% (t=1.98, P=0.20), at 24h (72±19)% and (69±24)% ( t=1.49, P=0.23), respectively, by the two methods. Conclusion: To calculate the ratio of thyroid 131 I uptake via the physic half life of the standard radioactive resource is feasible, and can both reduce the risk of ionizing radiation to technical staff and act as verifying method for quality control of thyroid function equipment. (authors)

  6. Preliminary study on the responses of three marine algae, Ulva pertusa (Chlorophyta), Gelidium amansii (Rhodophyta) and Sargassum enerve (Phaeophyta), to nitrogen source and its availability

    Science.gov (United States)

    Liu, Dongyan; Amy, Pickering; Sun, Jun

    2004-04-01

    An experiment was designed to select economically valuable macroalga species with high nutrient uptake rates. Such species cultured on a large scale could be a potential solution to eutrophication. Three macroalgae species, Ulva pertusa (Chlorophyta), Gelidium amansii (Rhodophyta) and Sargassum enerve (Phaeophyta), were chosen for the experiment because of their economic values and availability. Control and four nitrogen concentrations were achieved by adding NH{4/+} and NO{3/-}. The results indicate that the fresh weights of all species increase faster than that of control after 5 d culture. The fresh weight of Ulva pertusa increases fastest among the 3 species. However, different species show different responses to nitrogen source and its availability. They also show the advantage of using NH{4/+} than using NO{3/-}. U. pertusa grows best and shows higher capability of removing nitrogen at 200µmolL-1, but it has lower economical value. G. amansii has higher economical value but lower capability of removing nitrogen at 200 µmolL-1. The capability of nitrogen assimilation of S. enerve is higher than that of G. amansii at 200µmolL -1, but the former’s increase of fresh weight is lower than those of other two species. Then present preliminary study demonstrates that it is possible to use macroalgae as biofilters and further development of this approach could provide biologically valuable information on the source, fate, and transport of N in marine ecosystems. Caution is needed should we extrapolate these findings to natural environments.

  7. High-pressure single-crystal neutron diffraction (to 20 kbar) using a pulsed source: Preliminary investigation of Tl3PSe4

    International Nuclear Information System (INIS)

    Alkire, R.W.; Larson, A.C.; Vergamini, P.J.; Schirber, J.E.; Morosin, B.

    1985-01-01

    A new technique is described for performing high-pressure single-crystal neutron diffraction [up to 20 kbar (2GPa) at room temperature], using a BeCu pressure cell, an area detector and the Los Alamos National Laboratory pulsed neutron source. Success of this method depends on the increase in information available with a multi-wavelength pulse neutron source, a novel orientation of a cylindrically symmetric pressure cell with its axis coincident with the neutron beam and a specific crystal orientation within the pressure cell. Bragg scattering from the pressure cell is avoided and background for a given 2theta is constant. For a crystal of orthorhombic or higher symmetry oriented with the incident beam passing midway between the major lattice vectors, it will be possible to refine a complete three-dimensional structure with data collected from only one pressure loading. Preliminary investigations of Tl 3 PSe 4 lattice parameters (space group Pcmn) at 15(1)kbar yielded linear compressibilities (. 1000 in kbar -1 ) of Ksub(a) = 1.05(8), Ksub(b) = 1.50(10), Ksub(c) = 1.20(8). The anisotropic compressibility is explained by examination of the ambient-pressure room-temperature structure. (orig.)

  8. Sources of Respired Carbon in a Northern Minnesota Ombrotrophic Spruce Bog: Preliminary 14C Results from the SPRUCE Site.

    Science.gov (United States)

    Guilderson, T. P.; McNicol, G.; Machin, A.; Hanson, P. J.; McFarlane, K. J.; Osuna, J. L.; Pett-Ridge, J.; Singleton, M. J.

    2014-12-01

    A significant uncertainty in future land-surface carbon budgets is the response of wetlands to climate change. A corollary and related question is the future net climate (radiative) forcing impact from wetlands. Active wetlands emit both CO2 and CH4 to the atmosphere. CH4 is, over a few decades, a much more potent greenhouse gas than CO2. CO2 has a longer atmospheric lifetime and a longer 'tail' to its radiative influence. Whether wetlands are a net source or sink of atmospheric carbon under future climate change will depend on ecosystem response to rising temperatures and elevated CO2. The largest uncertainty in future wetland C-budgets, and their climate forcing is the stability of the large below-ground carbon stocks, often in the form of peat, and the partitioning of CO2 and CH4 released via ecosystem respiration. In advance of a long-term experimental warming and elevated CO2 manipulation at the DOE Spruce and Peatland Responses Under Climatic and Environmental Change (SPRUCE) site in the Marcell Experimental Forest, we have characterized the source of respired carbon used for both the production of CO2 and CH4. Samples were collected in early June, late July, and will be collected in early September from three large (~1.1 m2, ~0.5m3) chambers from the control plot, and two of the experimental plots selected for heating (+9°C, +4.5°C). Early June fluxes from the three chambers were ~5500 mgC-m-2-d-1 and ~16 mgC-m-2-d-1 for CO2 and CH4 respectively. Radiocarbon analysis of CO2 and CH4 indicate that the source for the respired carbon is for the most part recent, with most 14C values between 30 and 40‰ - i.e., carbon that was photosynthetically fixed in the last few years. In concert with rising air and ground temperatures fluxes in late July increased to ~6500 mgC-m-2-d-1 and ~86 mgC-m-2-d-1. Although deep-heating was initiated in mid to late June we hypothesize that the July respiration signal is dominated by the regular seasonal cycle of natural warming

  9. Preliminary design of the BPM electronics memory scanner/dual boxcar averager for the Advanced Photon Source

    International Nuclear Information System (INIS)

    Votaw, A.J.

    1992-01-01

    The memory scanner/dual boxcar averager are VXI modules that are part of the Advanced Photon Source (APS) beam position monitor (BPM) data acquisition system. Each pair of modules is designed to gather and process digital data from up to nine digital channels transmitting the BPM data from the storage ring (360 locations) and the synchrotron (80 locations). They store beam history in a buffer, store the latest scan of all channels, and provide boxcar averaged X and Y position data for the global orbit feedback system, provide boxcar average X and Y position data for beam diagnostics, and a buffered output of SCDU data as it is scanned for the beam abort interlock system. The system's capability to support single pass, closed orbit and tune measurement functions will also be briefly described

  10. Sources and fate of microplastics in marine and beach sediments of the Southern Baltic Sea-a preliminary study.

    Science.gov (United States)

    Graca, Bożena; Szewc, Karolina; Zakrzewska, Danuta; Dołęga, Anna; Szczerbowska-Boruchowska, Magdalena

    2017-03-01

    Microplastics' (particles size ≤5 mm) sources and fate in marine bottom and beach sediments of the brackish are strongly polluted Baltic Sea have been investigated. Microplastics were extracted using sodium chloride (1.2 g cm -3 ). Their qualitative identification was conducted using micro-Fourier-transform infrared spectroscopy (μFT-IR). Concentration of microplastics varied from 25 particles kg -1 d.w. at the open sea beach to 53 particles kg -1  d.w. at beaches of strongly urbanized bay. In bottom sediments, microplastics concentration was visibly lower compared to beach sediments (0-27 particles kg -1  d.w.) and decreased from the shore to the open, deep-sea regions. The most frequent microplastics dimensions ranged from 0.1 to 2.0 mm, and transparent fibers were predominant. Polyester, which is a popular fabrics component, was the most common type of microplastic in both marine bottom (50%) and beach sediments (27%). Additionally, poly(vinyl acetate) used in shipbuilding as well as poly(ethylene-propylene) used for packaging were numerous in marine bottom (25% of all polymers) and beach sediments (18% of all polymers). Polymer density seems to be an important factor influencing microplastics circulation. Low density plastic debris probably recirculates between beach sediments and seawater in a greater extent than higher density debris. Therefore, their deposition is potentially limited and physical degradation is favored. Consequently, low density microplastics concentration may be underestimated using current methods due to too small size of the debris. This influences also the findings of qualitative research of microplastics which provide the basis for conclusions about the sources of microplastics in the marine environment.

  11. A Long-Pulse Spallation Source at Los Alamos: Facility description and preliminary neutronic performance for cold neutrons

    International Nuclear Information System (INIS)

    Russell, G.J.; Weinacht, D.J.; Pitcher, E.J.; Ferguson, P.D.

    1998-03-01

    The Los Alamos National Laboratory has discussed installing a new 1-MW spallation neutron target station in an existing building at the end of its 800-MeV proton linear accelerator. Because the accelerator provides pulses of protons each about 1 msec in duration, the new source would be a Long Pulse Spallation Source (LPSS). The facility would employ vertical extraction of moderators and reflectors, and horizontal extraction of the spallation target. An LPSS uses coupled moderators rather than decoupled ones. There are potential gains of about a factor of 6 to 7 in the time-averaged neutron brightness for cold-neutron production from a coupled liquid H 2 moderator compared to a decoupled one. However, these gains come at the expense of putting ''tails'' on the neutron pulses. The particulars of the neutron pulses from a moderator (e.g., energy-dependent rise times, peak intensities, pulse widths, and decay constant(s) of the tails) are crucial parameters for designing instruments and estimating their performance at an LPSS. Tungsten is the reference target material. Inconel 718 is the reference target canister and proton beam window material, with Al-6061 being the choice for the liquid H 2 moderator canister and vacuum container. A 1-MW LPSS would have world-class neutronic performance. The authors describe the proposed Los Alamos LPSS facility, and show that, for cold neutrons, the calculated time-averaged neutronic performance of a liquid H 2 moderator at the 1-MW LPSS is equivalent to about 1/4th the calculated neutronic performance of the best liquid D 2 moderator at the Institute Laue-Langevin reactor. They show that the time-averaged moderator neutronic brightness increases as the size of the moderator gets smaller

  12. Preliminary study on the radiological and physicochemical quality of the Umgeni Water catchments and drinking water sources in KwaZulu-Natal, South Africa

    International Nuclear Information System (INIS)

    Manickum, T.; John, W.; Terry, S.; Hodgson, K.

    2014-01-01

    Raw and potable water sample sources, from the Umgeni Water catchment areas (rivers, dams, boreholes) in central KwaZulu-Natal (South Africa), were screened for Uranium concentration and alpha and beta radioactivity. Test methods used were gas flow proportional counting for alpha-beta radioactivity, and kinetic phosphorescence analysis (KPA), for Uranium. The uranium levels (median = 0.525 μg/L, range = <0.050–5.010) were well below the international World Health Organization (WHO) (2011) guideline for drinking-water quality (≤15 μg/L). The corresponding alpha and beta radioactivity was ≤0.5 Bq/L (median = 0.084, Interquartile Range (IR) = 0.038, range = 0.018–0.094), and ≤1.0 Bq/L (median = 0.114, IR = 0.096, range = 0.024–0.734), respectively, in compliance with the international WHO limits. For uranium radionuclide, the average dose level, at uranium level of ±0.525 μg/L, was 0.06 μSv/a, which complies with the WHO reference dose level for drinking water (<0.1 mSv/a). There was a distinct trend of cluster of relatively higher Uranium levels of some sources that were found to be associated with the geology/geography and groundwater sources. Overall, the radiological water quality classification, with respect to WHO, is “Blue” – ideal; additional physicochemical analyses indicated good water quality. The analytical test methods employed were found to be suitable for preliminary screening for potential radioactive “hot spots”. The observed Uranium levels, and the alpha/beta radioactivity, indicate contribution largely from Naturally Occurring Radioactive Material (NORM), with no significant health risk to humans, or to the environment. - Highlights: • Radiological and physicochemical quality of raw and drinking water sources. • Suitability of kinetic phosphorescence analysis for Uranium analysis of water. • Suitability of gas flow proportional counting for determining radioactivity of water. • The Effective

  13. A Preliminary Analysis of the Economics of Using Distributed Energy as a Source of Reactive Power Supply

    Energy Technology Data Exchange (ETDEWEB)

    Li, Fangxing [ORNL; Kueck, John D [ORNL; Rizy, D Tom [ORNL; King, Thomas F [ORNL

    2006-04-01

    A major blackout affecting 50 million people in the Northeast United States, where insufficient reactive power supply was an issue, and an increased number of filings made to the Federal Energy Regulatory Commission by generators for reactive power has led to a closer look at reactive power supply and compensation. The Northeastern Massachusetts region is one such area where there is an insufficiency in reactive power compensation. Distributed energy due to its close proximity to loads seems to be a viable option for solving any present or future reactive power shortage problems. Industry experts believe that supplying reactive power from synchronized distributed energy sources can be 2 to 3 times more effective than providing reactive support in bulk from longer distances at the transmission or generation level. Several technology options are available to supply reactive power from distributed energy sources such as small generators, synchronous condensers, fuel cells or microturbines. In addition, simple payback analysis indicates that investments in DG to provide reactive power can be recouped in less than 5 years when capacity payments for providing reactive power are larger than $5,000/kVAR and the DG capital and installation costs are lower than $30/kVAR. However, the current institutional arrangements for reactive power compensation present a significant barrier to wider adoption of distributed energy as a source of reactive power. Furthermore, there is a significant difference between how generators and transmission owners/providers are compensated for reactive power supplied. The situation for distributed energy sources is even more difficult, as there are no arrangements to compensate independent DE owners interested in supplying reactive power to the grid other than those for very large IPPs. There are comparable functionality barriers as well, as these smaller devices do not have the control and communications requirements necessary for automatic

  14. Preliminary Assessment of the Nuclide Migration from the Activation Zone Around the Proposed Spallation Neutron Source Facility

    Energy Technology Data Exchange (ETDEWEB)

    Dole, L.R.

    1998-09-01

    The purpose of this study is to investigate the potential impacts of migrating radionuclides from the activation zone around the proposed Spallation Neutron Source (SNS). Using conservatively high estimates of the potential inventory of radioactive activation products that could form in the proposed compacted-soil shield berm around an SNS facility on the Oak Ridge Reservation (ORR), a conservative, simplified transport model was used to estimate the potential worst-case concentrations of the 12 long-lived isotopes in the groundwater under a site with the hydrologic characteristics of the ORR. Of the 12, only 3 isotopes showed any potential to exceed the U.S. Nuclear Regulatory Commission (NRC) 10 Code of Federal Regulations (CFR) Part 20 Drinking Water Limits (DWLs). These isotopes were 14C, 22Na, and 54Mn. The latter two activation products have very short half-lives of 2.6 years and 0.854 year, respectively. Therefore, these will decay before reaching an off-site receptor, and they cannot pose off-site hazards. However, for this extremely conservative model, which overestimates the mobility of the contaminant, 14C, which has a 5,730-year half-life, was shown to represent a potential concern in the context of this study's conservative assumptions. This study examines alternative modifications to the SNS shield berm and makes recommendations.

  15. Ecological risk, source and preliminary assessment of metals in the surface sediments of Chabahar Bay, Oman Sea

    International Nuclear Information System (INIS)

    Agah, Homira; Saleh, Abolfazl; Bastami, Kazem Darvish; Fumani, Neda Sheijooni

    2016-01-01

    In this study, concentrations of Aluminum (Al), Iron (Fe), Chromium (Cr), Copper (Cu), Nickel (Ni), Vanadium (V), Zinc (Zn), Arsenic (As), Cobalt (Co) and lead (Pb) in the surface sediments from Chabahar Bay were studied to assess the degree of heavy metal pollution as a consequence of natural and anthropogenic sources. Metal contents in the sediments were observed in the order of: Al > Fe > Cr > V > Ni > Zn > Cu > > As > Pb > Co. According to enrichment factor (EF), Arsenic was higher than 1.5 at some sites, indicating anthropogenic inputs. Contents of Ni, As and Cr in the some sampling sites were higher than sediment quality guideline implying adverse impacts of these metals. Based on potential ecological risk (PER), the Chabahar Bay had low ecological risk. - Highlights: •Metals and major elements were determined in surface sediments from Chabahar Bay, Oman Sea. •EF values indicated non-enriched to moderate-enriched. •Ni, As and Cr were above ERL values.

  16. Preliminary Report on the Evaluation of an Electron-Positron Collider as a source of Monoenergetic Photons

    Energy Technology Data Exchange (ETDEWEB)

    Fast, James E.; Campbell, Luke W.

    2009-11-30

    Abstract Active interrogation methods are being investigated to detect shielded special nuclear material (SNM). These approaches utilize either neutron or photon beams to excite the SNM in concert with either neutron or gamma ray detectors to observe the stimulated emissions. The two primary methodologies with photon beams are photofission and nuclear resonance florescence (NRF). Photofission requires photons energies of 7-10 MeV while NRF requires photon energies around 2 MeV. For both techniques, photons that are not in the appropriate energy band, e.g. the low energy tail of a Bremsstrahlung photon beam, contribute unwanted additional radiation dose to cargo. Typically less than 10% of the photons are in the usable energy band. The additional photon production generates a commensurate amount of additional radiation dose in the source and target areas, impacting shielding requirements and/or dose to operators and equipment and at the expense of a similar increase in power consumption. Hence it is highly desirable to produce narrow energy (“monoenergetic”) photon beams with tunable energy in the range of ~2-20 MeV.

  17. Analysis the potential gas production of old municipal solid waste landfill as an alternative energy source: Preliminary results

    Science.gov (United States)

    Hayati, A. P.; Emalya, N.; Munawar, E.; Schwarzböck, T.; Lederer, J.; Fellner, J.

    2018-03-01

    The MSW landfill produces gas which is represent the energy resource that lost and polluted the ambient air. The objective of this study is to evaluate the potential gas production of old landfill as an alternative energy source. The study was conducted by using 10 years old waste in landfill simulator reactor (LSR). Four Landfills Simulator Reactors (LSR) were constructed for evaluate the gas production of old MSW landfilled. The LSR was made of high density poly ethylene (HDPE) has 50 cm outside diameter and 150 cm of high. The 10 years old waste was excavated from closed landfill and subsequently separated from inorganic fraction and sieved to maximum 50 mm size particle prior emplaced into the LSR. Although quite small compare to the LSR containing fresh waste has been reported, the LRS containing 10 years old waste still produce much landfill gas. The landfill gas produced of LSR operated with and without leachate recirculation were about 29 and 21 litter. The composition of landfill gas produced was dominated by CO2 with the composition of CH4 and O2 were around 12.5% and 0.2 %, respectively.

  18. Building a virtual simulation platform for quasistatic breast ultrasound elastography using open source software: A preliminary investigation.

    Science.gov (United States)

    Wang, Yu; Helminen, Emily; Jiang, Jingfeng

    2015-09-01

    Quasistatic ultrasound elastography (QUE) is being used to augment in vivo characterization of breast lesions. Results from early clinical trials indicated that there was a lack of confidence in image interpretation. Such confidence can only be gained through rigorous imaging tests using complex, heterogeneous but known media. The objective of this study is to build a virtual breast QUE simulation platform in the public domain that can be used not only for innovative QUE research but also for rigorous imaging tests. The main thrust of this work is to streamline biomedical ultrasound simulations by leveraging existing open source software packages including Field II (ultrasound simulator), VTK (geometrical visualization and processing), FEBio [finite element (FE) analysis], and Tetgen (mesh generator). However, integration of these open source packages is nontrivial and requires interdisciplinary knowledge. In the first step, a virtual breast model containing complex anatomical geometries was created through a novel combination of image-based landmark structures and randomly distributed (small) structures. Image-based landmark structures were based on data from the NIH Visible Human Project. Subsequently, an unstructured FE-mesh was created by Tetgen. In the second step, randomly positioned point scatterers were placed within the meshed breast model through an octree-based algorithm to make a virtual breast ultrasound phantom. In the third step, an ultrasound simulator (Field II) was used to interrogate the virtual breast phantom to obtain simulated ultrasound echo data. Of note, tissue deformation generated using a FE-simulator (FEBio) was the basis of deforming the original virtual breast phantom in order to obtain the postdeformation breast phantom for subsequent ultrasound simulations. Using the procedures described above, a full cycle of QUE simulations involving complex and highly heterogeneous virtual breast phantoms can be accomplished for the first time

  19. Payments for Environmental Services as source of development funding for small-scale farmers in northern Namibia: preliminary results

    Science.gov (United States)

    Angombe, Simon; Bloemertz, Lena; Käch, Simon; Asino, Josefina; Kuhn, Nikolaus J.

    2013-04-01

    Studies in Africa suggest that improving Soil Organic Carbon (SOC) on cropland soils increases yields, but also offers the opportunity of earning carbon credits. Further potential for earning carbon credits and generating Payments for Environmental Services (PES) lies in an integrated approach to landscape carbon management, including shrubland and pasture used for grazing and timber supply. These studies indicate that funds raised from PES could be used to foster the development of small-scale farming in northern Namibia. However, the limited information on soil quality and the rationale for particular soil management and land use practices applied by small-scale farmers in Namibia prohibits a conclusive assessment of the potential of Payment for PES as a source of income or funding opportunity for development initiatives in Northern Central Regions of Namibia. Therefore, the aim of this study is the identification of potential intervention mechanisms to improve the livelihood of small scale-farmers and reducing land degradation with the support of PES in the communal regions of northern Namibia. The work in Namibia aimed at identifying existing soil management and land use practices as well as soil quality, including carbon stocks, on land used by small-scale farmers in the densely populated northern central region. The main objective of the first part of the field work was to develop an overview of farming practices and soil quality as well as sampling and interviewing approaches. Four settlements were selected for the field work based on their distance to the urbanized road corridor between Oshakati and the Angolan border. Initial results confirm the potential to increase productivity on land used by small-scale farmers as well as the opportunity to develop landscape carbon stocks. However, limits to earning PES might be the lack of a market, and thus incentive for the farmers, to shift from subsistence to commercial farming.

  20. An Open-Source Label Atlas Correction Tool and Preliminary Results on Huntingtons Disease Whole-Brain MRI Atlases.

    Science.gov (United States)

    Forbes, Jessica L; Kim, Regina E Y; Paulsen, Jane S; Johnson, Hans J

    2016-01-01

    The creation of high-quality medical imaging reference atlas datasets with consistent dense anatomical region labels is a challenging task. Reference atlases have many uses in medical image applications and are essential components of atlas-based segmentation tools commonly used for producing personalized anatomical measurements for individual subjects. The process of manual identification of anatomical regions by experts is regarded as a so-called gold standard; however, it is usually impractical because of the labor-intensive costs. Further, as the number of regions of interest increases, these manually created atlases often contain many small inconsistently labeled or disconnected regions that need to be identified and corrected. This project proposes an efficient process to drastically reduce the time necessary for manual revision in order to improve atlas label quality. We introduce the LabelAtlasEditor tool, a SimpleITK-based open-source label atlas correction tool distributed within the image visualization software 3D Slicer. LabelAtlasEditor incorporates several 3D Slicer widgets into one consistent interface and provides label-specific correction tools, allowing for rapid identification, navigation, and modification of the small, disconnected erroneous labels within an atlas. The technical details for the implementation and performance of LabelAtlasEditor are demonstrated using an application of improving a set of 20 Huntingtons Disease-specific multi-modal brain atlases. Additionally, we present the advantages and limitations of automatic atlas correction. After the correction of atlas inconsistencies and small, disconnected regions, the number of unidentified voxels for each dataset was reduced on average by 68.48%.

  1. The attribute measurement technique

    International Nuclear Information System (INIS)

    MacArthur, Duncan W.; Langner, Diana; Smith, Morag; Thron, Jonathan; Razinkov, Sergey; Livke, Alexander

    2010-01-01

    Any verification measurement performed on potentially classified nuclear material must satisfy two seemingly contradictory constraints. First and foremost, no classified information can be released. At the same time, the monitoring party must have confidence in the veracity of the measurement. An information barrier (IB) is included in the measurement system to protect the potentially classified information while allowing sufficient information transfer to occur for the monitoring party to gain confidence that the material being measured is consistent with the host's declarations, concerning that material. The attribute measurement technique incorporates an IB and addresses both concerns by measuring several attributes of the nuclear material and displaying unclassified results through green (indicating that the material does possess the specified attribute) and red (indicating that the material does not possess the specified attribute) lights. The attribute measurement technique has been implemented in the AVNG, an attribute measuring system described in other presentations at this conference. In this presentation, we will discuss four techniques used in the AVNG: (1) the 1B, (2) the attribute measurement technique, (3) the use of open and secure modes to increase confidence in the displayed results, and (4) the joint design as a method for addressing both host and monitor needs.

  2. Quality Attribute Design Primitives

    National Research Council Canada - National Science Library

    Bass, Len

    2000-01-01

    This report focuses on the quality attribute aspects of mechanisms. An architectural mechanism is a 'structure whereby objects collaborate to provide some behavior that satisfies a requirement of the problem...

  3. Application of gel dosimetry - A preliminary study on verification of uniformity of activity and length of source used in Beta-Cath system

    International Nuclear Information System (INIS)

    Subramaniam, S.; Rabi Raja Singh, I.; Visalatchi, S.; Paul Ravindran, B.

    2002-01-01

    Recently the intraluminal irradiation of coronary arteries following balloon angioplasty is found to reduce proliferation of smooth muscle cells and restenosis. Among the isotopes used for the intracoronary irradiation, 90 Sr/Y appears to be ideal (H I Almos et al, 1996). In 1984 Gore et al proposed that radiation induced changes in the well-established Fricke solution could be probed with Nuclear Magnetic Resonance (NMR) relaxation measurements rather than using conventional spectrophotometry measurements. This was a major step in the development of gel dosimetry and since then gel dosimetry has been one of the major advances in the dosimetry of complex radiation fields has been in the area of gel dosimetry. In this preliminary work on gel dosimetry we present the verification of uniformity of activity along the length of the source train and verification of the length of the source used in the Beta-Cath system used for intracoronary brachytherapy with ferrous gel dosimeter. The Beta-Cath system obtained from Novoste, Norcross, GA was used in this study. It consists of a source train of 16 90 Sr/Y sources each of length 2.5mm. The total length of the source train is 40mm. For preparation of the Ferrous-Gelatin Gel, the recipe provided by the London Regional Cancer Center, London Ontario, Canada was used. Stock solutions of 50mM H 2 SO 4 , 0.3 mM ferrous ammonium sulphate, 0.05mM Xylenol orange was first prepared. The gel was prepared by mixing 4% gelatin with distilled water while stirring in a water bath at 40-42 deg. C. Acid solution, Ferrous ammonium sulphate solution and Xylenol orange were added and stirred in the water bath for about an hour to allow aeration. The mixture was poured in to three 20ml syringes to form the gel and stored in the refrigerator at 5 deg. C. For irradiation with Beta-Cath, the gel was prepared in three cylindrical 20ml syringes. A nylon tube having the same dimension as that of the delivery catheter used in intra-coronary was placed

  4. Preliminary study on the radiological and physicochemical quality of the Umgeni Water catchments and drinking water sources in KwaZulu-Natal, South Africa.

    Science.gov (United States)

    Manickum, T; John, W; Terry, S; Hodgson, K

    2014-11-01

    Raw and potable water sample sources, from the Umgeni Water catchment areas (rivers, dams, boreholes) in central KwaZulu-Natal (South Africa), were screened for Uranium concentration and alpha and beta radioactivity. Test methods used were gas flow proportional counting for alpha-beta radioactivity, and kinetic phosphorescence analysis (KPA), for Uranium. The uranium levels (median = 0.525 μg/L, range = water quality (≤15 μg/L). The corresponding alpha and beta radioactivity was ≤0.5 Bq/L (median = 0.084, Interquartile Range (IR) = 0.038, range = 0.018-0.094), and ≤1.0 Bq/L (median = 0.114, IR = 0.096, range = 0.024-0.734), respectively, in compliance with the international WHO limits. For uranium radionuclide, the average dose level, at uranium level of ±0.525 μg/L, was 0.06 μSv/a, which complies with the WHO reference dose level for drinking water (water quality classification, with respect to WHO, is "Blue" - ideal; additional physicochemical analyses indicated good water quality. The analytical test methods employed were found to be suitable for preliminary screening for potential radioactive "hot spots". The observed Uranium levels, and the alpha/beta radioactivity, indicate contribution largely from Naturally Occurring Radioactive Material (NORM), with no significant health risk to humans, or to the environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Phenomenology and Meaning Attribution

    African Journals Online (AJOL)

    John Paley. (2017). Phenomenology as Qualitative Research: A Critical Analysis of Meaning Attribution. ... basic philosophical nature of phenomenological meaning and inquiry, and that he not ... In keeping with the title of my book, Researching. Lived Experience ...... a quantitative social science that can make generalizing.

  6. Main designations and attributions

    International Nuclear Information System (INIS)

    2010-01-01

    The chapter presents the main designations and attributions of the LNMRI - Brazilian National Laboratory of Metrology of Ionizing Radiation, the Cooperative Center in Radiation Protection and Medical Preparations for Accidents with Radiation; the Treaty for fully banning of nuclear tests and the Regional Center for Training of IAEA

  7. Exploring Attribution Theory and Bias

    Science.gov (United States)

    Robinson, Jessica A.

    2017-01-01

    Courses: This activity can be used in a wide range of classes, including interpersonal communication, introduction to communication, and small group communication. Objectives: After completing this activity, students should be able to: (1) define attribution theory, personality attribution, situational attribution, and attribution bias; (2)…

  8. A MOX fuel attribute monitor

    International Nuclear Information System (INIS)

    Bliss, Mary; Jordan, David V.; Barnett, Debra S.; Redding, Rebecca L.; Pearce, Stephen K.

    2007-01-01

    Euratom performs safeguards monitoring of Fresh MOX fuel for domestic power production in the European Union. Video cameras monitor the reactor storage ponds. If video surveillance is lost for a certain amount of time a measurement is required to verify that no fuel was diverted. The attribute measurement to verify the continued presence of MOX fuel is neutron emission. Ideally this measurement would be made without moving or handling the fuel rod assembly. A prototype attribute measurement system was made using scintillating neutron sensitive glass waveguides developed by Pacific Northwest National Laboratory. Short lengths (5-20 cm) of the neutron sensitive fiber were mechanically spliced to 15 m lengths of commercial high numerical aperture fiber optic cable (Ceramoptec Optran Ultra 0.44). The light detector is a Hamamatsu R7400P photomultiplier tube. An electronics package was built to use the sensors with a GBS Elektronik MCA-166 multichannel analyzer and user interface. The MCA-166 is the system most commonly used by Euratom inspectors. It can also be run from a laptop computer using Maestro (Ortec) or other software. A MCNP model was made to compare to measurements made with several neutron sources including NIST traceable 252 Cf

  9. Engineering assessment and feasibility study of Chattanooga Shale as a future source of uranium. [Preliminary mining; data on soils, meteorology, water resources, and biological resources

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-01

    This volume contains five appendixes: Chattanooga Shale preliminary mining study, soils data, meteorologic data, water resources data, and biological resource data. The area around DeKalb County in Tennessee is the most likely site for commercial development for recovery of uranium. (DLC)

  10. Strictness Analysis for Attribute Grammars

    DEFF Research Database (Denmark)

    Rosendahl, Mads

    1992-01-01

    interpretation of attribute grammars. The framework is used to construct a strictness analysis for attribute grammars. Results of the analysis enable us to transform an attribute grammar such that attributes are evaluated during parsing, if possible. The analysis is proved correct by relating it to a fixpoint...... semantics for attribute grammars. An implementation of the analysis is discussed and some extensions to the analysis are mentioned....

  11. A preliminary analysis of health-related quality of life in the first year after permanent source interstitial brachytherapy (PIB) for clinically localized prostate cancer

    International Nuclear Information System (INIS)

    Lee, W. Robert; McQuellon, Richard P.; Harris-Henderson, Kesha; Case, L. Doug; McCullough, David L.

    2000-01-01

    Purpose: To prospectively assess the health-related quality of life (HRQOL) and changes in HRQOL during the first year after permanent source interstitial brachytherapy (PIB). Methods and Materials: Thirty-one men treated with PIB between September 1997 and March 1998 completed a quality of life (functional assessment of cancer therapy-prostate: FACT-P) and a urinary symptom questionnaire (international prostate symptom score: IPSS) prior to treatment (T0), 1 month (T1), 3 months (T3), 6 months (T6), and 12 months (T12) following PIB. All participants were treated with 125 I alone. Repeated measures analyses of variance (ANOVA) were conducted on all quality of life and urinary outcome measures for all 31 patients at all time points. Results: The median age of the study population was 66 (range 51-80). All men had clinical T1c-T2b prostate cancer. The Gleason score was ≤ 6 in 27/31 (87%). Median pretreatment PSA was 7.8 ng/ml (range 1.1-20.6). The mean score (and standard deviation) at T0, T1, T3, T6, and T12 for the FACT-P questionnaire are as follows: 140.5 (13.5), 132.7 (15.3), 137.2 (17.4), 140.1 (16.0), and 142.4 (15.3). For the global test across time, statistically significant differences were observed for the cumulative scores of FACT-P (p < 0.0012). The decrease in HRQOL was most marked 1 month following PIB. Examination of the subscales within the FACT-P instrument demonstrated statistically significant changes over time for the following: physical well-being (PWB), functional well-being (FWB), and prostate cancer (PCS). By 3 months, all HRQOL measures had returned to near baseline. The mean score (and standard deviation) at T0, T1, T3, T6, and T12 for the IPSS questionnaire are as follows: 8.3 (5.5), 18.4 (8.0), 15.7 (7.4), 13.7 (7.4), and 10.2 (5.7). For the global test across time, statistically significant differences were observed for the IPSS scores (p < 0.0001). The maximum increase in IPSS occurred 1 month following PIB. Conclusion: The results

  12. Quality Attribute Techniques Framework

    Science.gov (United States)

    Chiam, Yin Kia; Zhu, Liming; Staples, Mark

    The quality of software is achieved during its development. Development teams use various techniques to investigate, evaluate and control potential quality problems in their systems. These “Quality Attribute Techniques” target specific product qualities such as safety or security. This paper proposes a framework to capture important characteristics of these techniques. The framework is intended to support process tailoring, by facilitating the selection of techniques for inclusion into process models that target specific product qualities. We use risk management as a theory to accommodate techniques for many product qualities and lifecycle phases. Safety techniques have motivated the framework, and safety and performance techniques have been used to evaluate the framework. The evaluation demonstrates the ability of quality risk management to cover the development lifecycle and to accommodate two different product qualities. We identify advantages and limitations of the framework, and discuss future research on the framework.

  13. Attribution and reciprocity

    DEFF Research Database (Denmark)

    Sebald, Alexander Christopher

    2010-01-01

    , in turn, influence behavior. Dufwenberg and Kirchsteiger [Dufwenberg, M., Kirchsteiger, G., 2004. A theory of sequential reciprocity. Games Econ. Behav. 47 (2), 268-298] formalize this empirical finding in their ‘theory of sequential reciprocity'. This paper extends their analysis by moves of chance. More...... precisely, an extended framework is presented which allows for the analysis of strategic interactions of reciprocal agents in situations in which material outcomes also depend on chance. Moves of chance influence the attribution of responsibilities, people's perceptions about the (un)kindness of others and......, hence, their reciprocal behavior. Furthermore, with the help of two applications it is demonstrated how this framework can be used to explain experimental findings showing that people react very differently in outcomewise-identical situations depending on the moves of chance involved....

  14. Preliminary results of the evaluation of biomass use as energy sources; Resultados preliminares da avaliacao do uso de biomassas como fontes de energia

    Energy Technology Data Exchange (ETDEWEB)

    Rocha Ferreira, Leo da; Tourinho, Octavio A.F. [Instituto de Planejamento Economico e Social (IPES), Rio de Janeiro, RJ (Brazil). Inst. de Pesquisas

    1985-12-31

    This article discusses the preliminary results of the BIOMASSA model of IPEA with emphasis on three aspects: temporal and spatial crop mix patterns along the analysis horizon; evaluation of the social cost of alcohol fuel ; and the impact of alcohol production on the balance of payments. It concludes that the PROALCOOL increases domestic costs, but the impact on the balance of payments is positive and substantial. (author). 8 tabs

  15. Software Attribution for Geoscience Applications in the Computational Infrastructure for Geodynamics

    Science.gov (United States)

    Hwang, L.; Dumit, J.; Fish, A.; Soito, L.; Kellogg, L. H.; Smith, M.

    2015-12-01

    Scientific software is largely developed by individual scientists and represents a significant intellectual contribution to the field. As the scientific culture and funding agencies move towards an expectation that software be open-source, there is a corresponding need for mechanisms to cite software, both to provide credit and recognition to developers, and to aid in discoverability of software and scientific reproducibility. We assess the geodynamic modeling community's current citation practices by examining more than 300 predominantly self-reported publications utilizing scientific software in the past 5 years that is available through the Computational Infrastructure for Geodynamics (CIG). Preliminary results indicate that authors cite and attribute software either through citing (in rank order) peer-reviewed scientific publications, a user's manual, and/or a paper describing the software code. Attributions maybe found directly in the text, in acknowledgements, in figure captions, or in footnotes. What is considered citable varies widely. Citations predominantly lack software version numbers or persistent identifiers to find the software package. Versioning may be implied through reference to a versioned user manual. Authors sometimes report code features used and whether they have modified the code. As an open-source community, CIG requests that researchers contribute their modifications to the repository. However, such modifications may not be contributed back to a repository code branch, decreasing the chances of discoverability and reproducibility. Survey results through CIG's Software Attribution for Geoscience Applications (SAGA) project suggest that lack of knowledge, tools, and workflows to cite codes are barriers to effectively implement the emerging citation norms. Generated on-demand attributions on software landing pages and a prototype extensible plug-in to automatically generate attributions in codes are the first steps towards reproducibility.

  16. Paranormal belief and attributional style.

    Science.gov (United States)

    Dudley, R T; Whisnand, E A

    2000-06-01

    52 college students completed Tobacyk's 1988 Revised Paranormal Belief Scale and Peterson, Semmel, von Baeyer, Abramson, Metalsky, and Seligman's 1982 Attributional Style Questionnaire. Analysis showed significantly higher depressive attributional styles among high scorers on paranormal phenomena than low scorers.

  17. Cluster Based Vector Attribute Filtering

    NARCIS (Netherlands)

    Kiwanuka, Fred N.; Wilkinson, Michael H.F.

    2016-01-01

    Morphological attribute filters operate on images based on properties or attributes of connected components. Until recently, attribute filtering was based on a single global threshold on a scalar property to remove or retain objects. A single threshold struggles in case no single property or

  18. Technical attributes, health attribute, consumer attributes and their roles in adoption intention of healthcare wearable technology.

    Science.gov (United States)

    Zhang, Min; Luo, Meifen; Nie, Rui; Zhang, Yan

    2017-12-01

    This paper aims to explore factors influencing the healthcare wearable technology adoption intention from perspectives of technical attributes (perceived convenience, perceived irreplaceability, perceived credibility and perceived usefulness), health attribute (health belief) and consumer attributes (consumer innovativeness, conspicuous consumption, informational reference group influence and gender difference). By integrating technology acceptance model, health belief model, snob effect and conformity and reference group theory, hypotheses and research model are proposed. The empirical investigation (N=436) collects research data through questionnaire. Results show that the adoption intention of healthcare wearable technology is influenced by technical attributes, health attribute and consumer attributes simultaneously. For technical attributes, perceived convenience and perceived credibility both positively affect perceived usefulness, and perceived usefulness influences adoption intention. The relation between perceived irreplaceability and perceived usefulness is only supported by males. For health attribute, health belief affects perceived usefulness for females. For consumer attributes, conspicuous consumption and informational reference group influence can significantly moderate the relation between perceived usefulness and adoption intention and the relation between consumer innovativeness and adoption intention respectively. What's more, consumer innovativeness significantly affects adoption intention for males. This paper aims to discuss technical attributes, health attribute and consumer attributes and their roles in the adoption intention of healthcare wearable technology. Findings may provide enlightenment to differentiate product developing and marketing strategies and provide some implications for clinical medicine. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Spanning Tree Based Attribute Clustering

    DEFF Research Database (Denmark)

    Zeng, Yifeng; Jorge, Cordero Hernandez

    2009-01-01

    Attribute clustering has been previously employed to detect statistical dependence between subsets of variables. We propose a novel attribute clustering algorithm motivated by research of complex networks, called the Star Discovery algorithm. The algorithm partitions and indirectly discards...... inconsistent edges from a maximum spanning tree by starting appropriate initial modes, therefore generating stable clusters. It discovers sound clusters through simple graph operations and achieves significant computational savings. We compare the Star Discovery algorithm against earlier attribute clustering...

  20. Direct Visual Editing of Node Attributes in Graphs

    Directory of Open Access Journals (Sweden)

    Christian Eichner

    2016-10-01

    Full Text Available There are many expressive visualization techniques for analyzing graphs. Yet, there is only little research on how existing visual representations can be employed to support data editing. An increasingly relevant task when working with graphs is the editing of node attributes. We propose an integrated visualize-and-edit approach to editing attribute values via direct interaction with the visual representation. The visualize part is based on node-link diagrams paired with attribute-dependent layouts. The edit part is as easy as moving nodes via drag-and-drop gestures. We present dedicated interaction techniques for editing quantitative as well as qualitative attribute data values. The benefit of our novel integrated approach is that one can directly edit the data while the visualization constantly provides feedback on the implications of the data modifications. Preliminary user feedback indicates that our integrated approach can be a useful complement to standard non-visual editing via external tools.

  1. Uncertainty assessment of source attribution of PM(2.5) and its water-soluble organic carbon content using different biomass burning tracers in positive matrix factorization analysis--a case study in Beijing, China.

    Science.gov (United States)

    Tao, Jun; Zhang, Leiming; Zhang, Renjian; Wu, Yunfei; Zhang, Zhisheng; Zhang, Xiaoling; Tang, Yixi; Cao, Junji; Zhang, Yuanhang

    2016-02-01

    Daily PM2.5 samples were collected at an urban site in Beijing during four one-month periods in 2009-2010, with each period in a different season. Samples were subject to chemical analysis for various chemical components including major water-soluble ions, organic carbon (OC) and water-soluble organic carbon (WSOC), element carbon (EC), trace elements, anhydrosugar levoglucosan (LG), and mannosan (MN). Three sets of source profiles of PM2.5 were first identified through positive matrix factorization (PMF) analysis using single or combined biomass tracers - non-sea salt potassium (nss-K(+)), LG, and a combination of nss-K(+) and LG. The six major source factors of PM2.5 included secondary inorganic aerosol, industrial pollution, soil dust, biomass burning, traffic emission, and coal burning, which were estimated to contribute 31±37%, 39±28%, 14±14%, 7±7%, 5±6%, and 4±8%, respectively, to PM2.5 mass if using the nss-K(+) source profiles, 22±19%, 29±17%, 20±20%, 13±13%, 12±10%, and 4±6%, respectively, if using the LG source profiles, and 21±17%, 31±18%, 19±19%, 11±12%, 14±11%, and 4±6%, respectively, if using the combined nss-K(+) and LG source profiles. The uncertainties in the estimation of biomass burning contributions to WSOC due to the different choices of biomass burning tracers were around 3% annually and up to 24% seasonally in terms of absolute percentage contributions, or on a factor of 1.7 annually and up to a factor of 3.3 seasonally in terms of the actual concentrations. The uncertainty from the major source (e.g. industrial pollution) was on a factor of 1.9 annually and up to a factor of 2.5 seasonally in the estimated WSOC concentrations. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Preliminary Result of Earthquake Source Parameters the Mw 3.4 at 23:22:47 IWST, August 21, 2004, Centre Java, Indonesia Based on MERAMEX Project

    Science.gov (United States)

    Laksono, Y. A.; Brotopuspito, K. S.; Suryanto, W.; Widodo; Wardah, R. A.; Rudianto, I.

    2018-03-01

    In order to study the structure subsurface at Merapi Lawu anomaly (MLA) using forward modelling or full waveform inversion, it needs a good earthquake source parameters. The best result source parameter comes from seismogram with high signal to noise ratio (SNR). Beside that the source must be near the MLA location and the stations that used as parameters must be outside from MLA in order to avoid anomaly. At first the seismograms are processed by software SEISAN v10 using a few stations from MERAMEX project. After we found the hypocentre that match the criterion we fine-tuned the source parameters using more stations. Based on seismogram from 21 stations, it is obtained the source parameters as follows: the event is at August, 21 2004, on 23:22:47 Indonesia western standard time (IWST), epicentre coordinate -7.80°S, 101.34°E, hypocentre 47.3 km, dominant frequency f0 = 3.0 Hz, the earthquake magnitude Mw = 3.4.

  3. SOA: A Quality Attribute Perspective

    Science.gov (United States)

    2011-06-23

    in software engineering from CMU. 6June 2011 Twitter #seiwebinar © 2011 Carnegie Mellon University Agenda Service -Oriented Architecture and... Software Architecture: Review Service -Orientation and Quality Attributes Summary and Future Challenges 7June 2011 Twitter #seiwebinar © 2011...Architecture and Software Architecture: Review Service -Orientation and Quality Attributes Summary and Future Challenges Review 10June 2011 Twitter

  4. Sources and distribution of organic matter in thirty five tropical estuaries along the west coast of India-a preliminary assessment

    Digital Repository Service at National Institute of Oceanography (India)

    Pradhan, U.K.; Wu, Y.; Shirodkar, P.V.; Zhang, J.; Zhang, G.

    the strong control of geographical provenance on sedimentary OM composition from south to north along the WCI. Results of an end-member mixing model reveal that terrigenous sources (C3 plants, C4 plants, and soil) contribute ~80...

  5. Identifying Key Attributes for Protein Beverages.

    Science.gov (United States)

    Oltman, A E; Lopetcharat, K; Bastian, E; Drake, M A

    2015-06-01

    This study identified key attributes of protein beverages and evaluated effects of priming on liking of protein beverages. An adaptive choice-based conjoint study was conducted along with Kano analysis to gain insight on protein beverage consumers (n = 432). Attributes evaluated included label claim, protein type, amount of protein, carbohydrates, sweeteners, and metabolic benefits. Utility scores for levels and importance scores for attributes were determined. Subsequently, two pairs of clear acidic whey protein beverages were manufactured that differed by age of protein source or the amount of whey protein per serving. Beverages were evaluated by 151 consumers on two occasions with or without priming statements. One priming statement declared "great flavor," the other priming statement declared 20 g protein per serving. A two way analysis of variance was applied to discern the role of each priming statement. The most important attribute for protein beverages was sweetener type, followed by amount of protein, followed by type of protein followed by label claim. Beverages with whey protein, naturally sweetened, reduced sugar and ≥15 g protein per serving were most desired. Three consumer clusters were identified, differentiated by their preferences for protein type, sweetener and amount of protein. Priming statements positively impacted concept liking (P 0.05). Consistent with trained panel profiles of increased cardboard flavor with higher protein content, consumers liked beverages with 10 g protein more than beverages with 20 g protein (6.8 compared with 5.7, P appeal. © 2015 Institute of Food Technologists®

  6. Semantic attributes based texture generation

    Science.gov (United States)

    Chi, Huifang; Gan, Yanhai; Qi, Lin; Dong, Junyu; Madessa, Amanuel Hirpa

    2018-04-01

    Semantic attributes are commonly used for texture description. They can be used to describe the information of a texture, such as patterns, textons, distributions, brightness, and so on. Generally speaking, semantic attributes are more concrete descriptors than perceptual features. Therefore, it is practical to generate texture images from semantic attributes. In this paper, we propose to generate high-quality texture images from semantic attributes. Over the last two decades, several works have been done on texture synthesis and generation. Most of them focusing on example-based texture synthesis and procedural texture generation. Semantic attributes based texture generation still deserves more devotion. Gan et al. proposed a useful joint model for perception driven texture generation. However, perceptual features are nonobjective spatial statistics used by humans to distinguish different textures in pre-attentive situations. To give more describing information about texture appearance, semantic attributes which are more in line with human description habits are desired. In this paper, we use sigmoid cross entropy loss in an auxiliary model to provide enough information for a generator. Consequently, the discriminator is released from the relatively intractable mission of figuring out the joint distribution of condition vectors and samples. To demonstrate the validity of our method, we compare our method to Gan et al.'s method on generating textures by designing experiments on PTD and DTD. All experimental results show that our model can generate textures from semantic attributes.

  7. Preliminary Study of the Efficacy of Using Nuclear Resonance Fluorescence with Quasi-Monoenergetic Gamma-Ray Sources for Nuclear Safeguards Assay

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, M S; McNabb, D P; Hall, J M; Gonzalez, J J

    2011-02-17

    We have studied the efficacy of using nuclear resonance fluorescence (NRF)-based techniques to assay spent nuclear fuel for Pu content using quasi-monoenergetic sources. We have developed two techniques to precisely determine the Pu content in a fuel rod/pin. One of our approaches is virtually free of systematic uncertainties. Using analytical models, we have determined the amount of time required to measure the Pu content in spent nuclear fuel rods and spent fuel assemblies to within 1% precision. We note that Pu content can be determined in a fuel assembly about as fast as in a single fuel pin. The performance of NRF-based assay techniques with improved photon sources, which are currently under development, will also estimated. For follow-on research we propose to: (1) Construct research prototype detection systems for both of the NRF-based assay systems proposed in this paper and measure their calibration curves; (2) Determine the systematic errors associated with both assay methods, explore ways to reduce the errors and fold the results into future performance calculations; (3) Develop an algorithm to assay a fuel assembly; (4) Perform validation measurements using a single pin and scaled assemblies; (5) Research and develop current-mode detection and/or threshold detection techniques to improve assay times; (6) Characterize the flux of newly constructed sources and fold the results into the calculations presented here to determine the feasibility of a variety of proposed sources; and (7) Collaborate with others in the safeguards community to build a prototype system and perform an NRF-based assay demonstration on spent fuel.

  8. Abstract Interpretation and Attribute Gramars

    DEFF Research Database (Denmark)

    Rosendahl, Mads

    The objective of this thesis is to explore the connections between abstract interpretation and attribute grammars as frameworks in program analysis. Abstract interpretation is a semantics-based program analysis method. A large class of data flow analysis problems can be expressed as non-standard ...... is presented in the thesis. Methods from abstract interpretation can also be used in correctness proofs of attribute grammars. This proof technique introduces a new class of attribute grammars based on domain theory. This method is illustrated with examples....

  9. Nitrate Pollution and Preliminary Source Identification of Surface Water in a Semi-Arid River Basin, Using Isotopic and Hydrochemical Approaches

    Directory of Open Access Journals (Sweden)

    Ying Xue

    2016-08-01

    Full Text Available Nitrate contamination in rivers has raised widespread concern in the world, particularly in arid/semi-arid river basins lacking qualified water. Understanding the nitrate pollution levels and sources is critical to control the nitrogen input and promote a more sustainable water management in those basins. Water samples were collected from a typical semi-arid river basin, the Weihe River watershed, China, in October 2014. Hydrochemical assessment and nitrogen isotopic measurement were used to determine the level of nitrogen compounds and identify the sources of nitrate contamination. Approximately 32.4% of the water samples exceeded the World Health Organization (WHO drinking water standard for NO3−-N. Nitrate pollution in the main stream of the Weihe River was obviously much more serious than in the tributaries. The δ15N-NO3− of water samples ranged from +8.3‰ to +27.0‰. No significant effect of denitrification on the shift in nitrogen isotopic values in surface water was observed by high dissolved oxygen (DO values and linear relationship diagram between NO3−-N and δ15N-NO3−, except in the Weihe River in Huayin County and Shitou River. Analyses of hydrochemistry and isotopic compositions indicate that domestic sewage and agricultural activities are the main sources of nitrate in the river.

  10. AcquisitionFootprintAttenuationDrivenbySeismicAttributes

    Directory of Open Access Journals (Sweden)

    Cuellar-Urbano Mayra

    2014-04-01

    Full Text Available Acquisition footprint, one of the major problems that PEMEX faces in seismic imaging, is noise highly correlated to the geometric array of sources and receivers used for onshore and offshore seismic acquisitions. It prevails in spite of measures taken during acquisition and data processing. This pattern, throughout the image, is easily confused with geological features and misguides seismic attribute computation. In this work, we use seismic data from PEMEX Exploración y Producción to show the conditioning process for removing random and coherent noise using linear filters. Geometric attributes used in a workflow were computed for obtaining an acquisition footprint noise model and adaptively subtract it from the seismic data.

  11. Quality attributes for mobile applications

    OpenAIRE

    Fernandes, João M.; Ferreira, André Leite

    2016-01-01

    A mobile application is a type of software application developed to run on a mobile device. The chapter discusses the main characteristics of mobile devices, since they have a great impact on mobile applications. It also presents the classification of mobile applications according to two main types: native and web-based applications. Finally, this chapter identifies the most relevant types of quality attributes for mobile applications. It shows that the relevant quality attributes for mobile ...

  12. Regional-scale modeling of near-ground ozone in the Central East China, source attributions and an assessment of outflow to East Asia The role of regional-scale transport during MTX2006

    Science.gov (United States)

    Li, J.; Wang, Z.; Akimoto, H.; Yamaji, K.; Takigawa, M.; Pochanart, P.; Liu, Y.; Kanaya, Y.

    2008-07-01

    A 3-D regional chemical transport model, the Nested Air Quality Prediction Model System (NAQPMS), with an on-line tracer tagging module was applied to study the source of the near-ground (pollutants. In particular, the model captured highly polluted and clean cases well. The simulated near-ground ozone over CEC is 60 85 ppbv (parts per billion by volume), higher than those (20 50 ppbv) in Japan and over the North Pacific. The simulated tagged tracer indicates that the regional-scale transport of chemically produced ozone over other areas in CEC contributes to the most fractions (49%) of the near-ground mean ozone at Mt. Tai in June, rather than the in-situ photochemistry (12%). Due to high anthropogenic and biomass burning emissions, the contributions of the ground ozone from the southern part of CEC plays the most important role (32.4 ppbv, 37.9% of total ozone) in the monthly mean ozone concentration at Mt. Tai, which even reached 59 ppbv (62%) on 6 7 June 2006. The monthly mean horizontal distribution of chemically produced ozone from various source regions indicates that the spatial distribution of O3 over CEC is controlled by the photochemical reactions. In addition, the regional-scale transport of pollutants also plays an important role in the spatial and temporal distribution of ozone over CEC. The chemically produced ozone from the southern part of the study region can be transported northeastwardly to the northern rim of CEC. The mean contribution is 5 10 ppbv, and it can reach 25 ppbv during high ozone events. This work also studied the outflow of CEC ozone and its precursors, as well as their influences and contributions to the ozone level over adjacent regions/countries. It shows that the contribution of CEC ozone to mean ozone mixing ratios over Korea Peninsula and Japan is 5 15 ppbv, of which about half was due to the direct transport of ozone from CEC and half was contributed by the ozone produced locally by the transported ozone precursors from CEC.

  13. Belief attribution despite verbal interference.

    Science.gov (United States)

    Forgeot d'Arc, Baudouin; Ramus, Franck

    2011-05-01

    False-belief (FB) tasks have been widely used to study the ability of individuals to represent the content of their conspecifics' mental states (theory of mind). However, the cognitive processes involved are still poorly understood, and it remains particularly debated whether language and inner speech are necessary for the attribution of beliefs to other agents. We present a completely nonverbal paradigm consisting of silent animated cartoons in five closely related conditions, systematically teasing apart different aspects of scene analysis and allowing the assessment of the attribution of beliefs, goals, and physical causation. In order to test the role of language in belief attribution, we used verbal shadowing as a dual task to inhibit inner speech. Data on 58 healthy adults indicate that verbal interference decreases overall performance, but has no specific effect on belief attribution. Participants remained able to attribute beliefs despite heavy concurrent demands on their verbal abilities. Our results are most consistent with the hypothesis that belief attribution is independent from inner speech.

  14. Preliminary study on German teaching with help of cyber source%因特网辅助德语教学初探

    Institute of Scientific and Technical Information of China (English)

    黄扬

    2016-01-01

    网络的地位在知识型社会显得十分突出。网络的普及给德语教学提供了另一种可能性,即采用大量自然、真实和鲜活的语言材料辅助德语教学。德语教师应尝试在具体的教学实践中,切合教学目标和要求,结合运用优秀的德语因特网资源,探索新时期的德语教学方法,以培养和增强学生的自主学习能力,提高学生的德语语言综合能力和综合素质。%Network is very important in the knowledge society and the popularity of the internet provides another possibility for German teaching .That is ,cyber source provides real and vivid corpus for German teaching .Thus German teaching should be combined with excellent cyber source by German teachers .According to teaching requirements and teaching objectives ,new methods for German teaching in the new period , should be explored to train and develope students' autonomous learning ability ,and improve their comprehensive language ability and comprehensive quality .

  15. Preliminary thermo-mechanical analysis of the second phase photon shutters for insertion device beamline front ends at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Nian, H.L.T.; Sheng, I.C.A.; Kuzay, T.M.

    1993-01-01

    The photon shutters (PS) on the insertion device front end of the beamlines at the Advanced Photon Source (APS) are designed to fully intercept powerful 7-GeV undulator radiation. Traditional materials (oxygen-free copper and Glidcop) are used in their construction. Initially, the APS proposes to operate the storage ring at 100 mA. In later phases of operation, the APS will operate the storage ring at 300 mA. The heat flux from the undulators is enormous. For example, in the later phase of the project, the first photon shutter (PS1) placed at a distance of 17 m from the Undulator A source will be subjected to 1400 W/mm 2 at normal incidence with a total power of 11.4 kW. The PS uses an enhanced heat transfer mechanism developed at Argonne National Laboratory, which increases the convective heat transfer coefficient to about 3 W/cm 2 · degrees C with single phase water as the coolant. To be able to handle the expected three-fold increase in the intense heat flux, some low-Z materials (such as beryllium or graphite), which can absorb the x-rays through their thickness, are now considered as the facing material on the absorber base plate of the PS. Our analysis of PSI indicates that the face plate made of either graphite or beryllium retains its integrity in most of the cases. The maximum effective stress of the absorber plate (made of annealed OFHC) exceeds the yield strength (50 MPa) except in the case of an absorber with a 10-mm graphite face plate

  16. High dose rate brachytherapy for prevention of restenosis after percutaneous transluminal coronary angioplasty: preliminary dosimetric tests of a new source presentation

    International Nuclear Information System (INIS)

    Popowski, Youri; Verin, Vitali; Papirov, Igor; Nouet, Philippe; Rouzaud, Michel; Grob, Eugene; Schwager, Michael; Urban, Philippe; Rutishauser, Wilhelm; Kurtz, John M.

    1995-01-01

    Purpose: Balloon dilatation of coronary artery stenosis has become a standard treatment of atherosclerotic heart disease. Restenosis due to excessive intimal cell proliferation, which subsequently occurs in 20-50% of patients, represents one of the major clinical problems in contemporary cardiology, and no satisfactory method for its prevention has thus far been found. Because modest doses of radiation have proved effective in preventing certain types of abnormal cellular proliferation resulting from surgical trauma, and brachytherapy has already been used successfully after dilatation of peripheral arteries, development of a radioactive source suitable for coronary artery applications would be of great interest. Methods and Materials: Nonradioactive flexible yttrum-89 wires (diameter of 0.15 and 0.26 mm) were activated within the thermal neutron flux of an experimental reactor. Standard angioplasty balloons (2 cm long, 2.5 mm in diameter when inflated) were inserted for dosimetry into a specially manufactured tissue equivalent phantom. Four wells, drilled perpendicular to the axis of the balloon, allowed for the insertion of thermal luminescent dosimeters (TLDs; 2 mm of diameter) and spacers. The angioplasty balloon was inflated with air or with contrast media. Radioactive yttrium-90 wires were left in the central lumen of the balloon for 2 min. Doses at the surface of the balloon, and at 1, 2, and 3 mm were determined from TLD readings. Results: Doses obtained at the surface of the balloon, for a 2-min exposure for the 0.26 mm wire (balloon inflated with air) and the 0.15 mm wire (air or contrast), were 56.5 Gy, 17.8 Gy, 5.4 Gy, respectively. As expected for a beta emitter, the fall-off in dose as a function of depth was rapid. External irradiation from the beta source was negligible. Conclusions: Our experiments indicate that the dose rates attainable at the surface of the angioplasty balloon using this technique allow the doses necessary for the inhibition of

  17. Quantification of MTE in surface sediments of Morbihan Coast (South Brittany, France): A preliminary approach for determination of sources and dynamics

    Science.gov (United States)

    Jimenez, Joselyn; Goubert, Evelyne; Labeyrie, Laurent; Coynel, Alexandra; Menier, David

    2014-05-01

    The Morbihan Coast (South Brittany, France) has an intense coastal activity: farming, industry, urban habitation run-off, yachting and transportation. In the past centuries, tin mining industry was also developed. These different factors may introduce metal trace elements (MTE) into the marine environment at toxic concentration levels. This pollution can particularly affect the oyster production, widely developed in the area. Monitoring MTE in surface sediments at high spatial resolution has been programmed to assess pollutants and their sources in two of the major Morbihan coastal systems concerned with oyster farming, and where available information on MTE impact and sediment quality is limited: the Bay of Quiberon, partly protected from the open ocean by the Quiberon Peninsula and several islands, mostly sandy (coarse to fine, with a significant shelly fraction), with water depths shallower that 25 m, and the Gulf of Morbihan, a shallow depth (less than 5 m, apart from the two paleoriver beds), semi-enclosed, estuarine system with very coarse sand to fine mud, mostly distributed by a strong tidal current system. Fifty two surface sediment samples were collected in April 2013 to characterize the MTE spatial distribution through the salinity and pollution gradients, from the small local rivers and harbor areas to the open marine environments. Analyses cover sedimentological and biogeochemical properties (particulate organic carbon using a LECO-CS-230; MTE using ICP-MS or DMA for Hg). Statistical analyses help to discriminate within the spatial variability the natural (e.g. grain-size effect) and anthropogenic factors. MTE concentrations were also compared to local geochemical background as measured at the bottom of three sediment cores collected in representative sites, for calculating the enrichment index of each MTE and evaluating the degree of sediment contamination. The initial interpretation of the results would indicate a clear distinction between the

  18. Geologic studies to identify the source for high levels of radium and barium in illinois ground-water supplies: a preliminary report. Final report

    International Nuclear Information System (INIS)

    Cartwright, K.; Specht, S.A.; Gilkeson, R.H.; Griffin, R.A.; Larson, T.E.

    1978-08-01

    Analyses of water from municipal wells in Illinois by the Illinois Environmental Protection Agency showed that more than 300 wells exceeded the upper limit for gross alpha radiation in drinking water. More than 30 wells exceeded the upper limit for barium in drinking water. High levels of radiation in ground water were more extensive in areal distribution than the high levels of barium. All of the affected wells were finished in bedrock, primarily in rocks of the Cambrian and Ordovician Systems of northern Illinois. The geologic settings in which the high levels of radiation and barium were documented indicated that the problem was not restricted to Illinoise. The source of the radiation in ground water was thought to be the natural occurrence of the radioactive elements uranium-238 and thorium-232 in the aquifer rocks. Analyses of a limited number of rock samples indicated that uranium and thorium concentrations were highest in fine-grained sediments in the aquifer systems; the highest concentration was in shales that confine the aquifer. Chemical analyses of rock samples indicated that high concentrations of barium were widespread in rocks of the Cambrian and Ordovician Systems. The concentration of barium in ground water was controlled by solubility equilibria reactions with sulfate ion. A map showing sulfate ion concentration in the Cambrian-Ordovician Aquifer could be used to delimit regions where barium might occur at concentrations exceeding 1 milligram/liter

  19. A Chance for Attributable Agency.

    Science.gov (United States)

    Briegel, Hans J; Müller, Thomas

    Can we sensibly attribute some of the happenings in our world to the agency of some of the things around us? We do this all the time, but there are conceptual challenges purporting to show that attributable agency, and specifically one of its most important subspecies, human free agency, is incoherent. We address these challenges in a novel way: rather than merely rebutting specific arguments, we discuss a concrete model that we claim positively illustrates attributable agency in an indeterministic setting. The model, recently introduced by one of the authors in the context of artificial intelligence, shows that an agent with a sufficiently complex memory organization can employ indeterministic happenings in a meaningful way. We claim that these considerations successfully counter arguments against the coherence of libertarian (indeterminism-based) free will.

  20. Screening of endophytic sources of exopolysaccharides: Preliminary characterization of crude exopolysaccharide produced by submerged culture of Diaporthe sp. JF766998 under different cultivation time

    Directory of Open Access Journals (Sweden)

    Ravely Casarotti Orlandelli

    2016-06-01

    Full Text Available Endophytic fungi have been described as producers of important bioactive compounds; however, they remain under-exploited as exopolysaccharides (EPS sources. Therefore, this work reports on EPS production by submerged cultures of eight endophytes isolated from Piper hispidum Sw., belonging to genera Diaporthe, Marasmius, Phlebia, Phoma, Phyllosticta and Schizophyllum. After fermentation for 96 h, four endophytes secreted EPS: Diaporthe sp. JF767000, Diaporthe sp. JF766998, Diaporthe sp. JF767007 and Phoma herbarum JF766995. The EPS from Diaporthe sp. JF766998 differed statistically from the others, with a higher percentage of carbohydrate (91% and lower amount of protein (8%. Subsequently, this fungus was grown under submerged culture for 72, 96 and 168 h (these EPS were designated EPSD1-72, EPSD1-96 and EPSD1-168 and the differences in production, monosaccharide composition and apparent molecular were compared. The EPS yields in mg/100 mL of culture medium were: 3.0 ± 0.4 (EPSD1-72, 15.4 ± 2.2 (EPSD1-96 and 14.8 ± 1.8 (EPSD1-168. The EPSD1-72 had high protein content (28.5% and only 71% of carbohydrate; while EPSD1-96 and EPSD1-168 were composed mainly of carbohydrate (≈95 and 100%, respectively, with low protein content (≈5% detected at 96 h. Galactose was the main monosaccharide component (30% of EPSD1-168. Differently, EPSD1-96 was rich in glucose (51%, with molecular weight of 46.6 kDa. It is an important feature for future investigations, because glucan-rich EPS are reported as effective antitumor agents.

  1. Geohydrology of Big Bear Valley, California: phase 1--geologic framework, recharge, and preliminary assessment of the source and age of groundwater

    Science.gov (United States)

    Flint, Lorraine E.; Brandt, Justin; Christensen, Allen H.; Flint, Alan L.; Hevesi, Joseph A.; Jachens, Robert; Kulongoski, Justin T.; Martin, Peter; Sneed, Michelle

    2012-01-01

    Big Bear Valley. The INFILv3 model was modified for this study to include a perched zone beneath the root zone to better simulate lateral seepage and recharge in the shallow subsurface in mountainous terrain. The climate input used in the INFILv3 model was developed by using daily climate data from 84 National Climatic Data Center stations and published Parameter Regression on Independent Slopes Model (PRISM) average monthly precipitation maps to match the drier average monthly precipitation measured in the Baldwin Lake drainage basin. This model resulted in a good representation of localized rain-shadow effects and calibrated well to measured lake volumes at Big Bear and Baldwin Lakes. The simulated average annual recharge was about 5,480 acre-ft/yr in the Big Bear study area, with about 2,800 acre-ft/yr in the Big Bear Lake surface-water drainage basin and about 2,680 acre-ft/yr in the Baldwin Lake surface-water drainage basin. One spring and eight wells were sampled and analyzed for chemical and isotopic data in 2005 and 2006 to determine if isotopic techniques could be used to assess the sources and ages of groundwater in the Big Bear Valley. This approach showed that the predominant source of recharge to the Big Bear Valley is winter precipitation falling on the surrounding mountains. The tritium and uncorrected carbon-14 ages of samples collected from wells for this study indicated that the groundwater basin contains water of different ages, ranging from modern to about 17,200-years old.The results of these investigations provide an understanding of the lateral and vertical extent of the groundwater basin, the spatial distribution of groundwater recharge, the processes responsible for the recharge, and the source and age of groundwater in the groundwater basin. Although the studies do not provide an understanding of the detailed water-bearing properties necessary to determine the groundwater availability of the basin, they do provide a framework for the future

  2. The WOMBAT Attack Attribution Method: Some Results

    Science.gov (United States)

    Dacier, Marc; Pham, Van-Hau; Thonnard, Olivier

    In this paper, we present a new attack attribution method that has been developed within the WOMBAT project. We illustrate the method with some real-world results obtained when applying it to almost two years of attack traces collected by low interaction honeypots. This analytical method aims at identifying large scale attack phenomena composed of IP sources that are linked to the same root cause. All malicious sources involved in a same phenomenon constitute what we call a Misbehaving Cloud (MC). The paper offers an overview of the various steps the method goes through to identify these clouds, providing pointers to external references for more detailed information. Four instances of misbehaving clouds are then described in some more depth to demonstrate the meaningfulness of the concept.

  3. Attribute Obfuscation with Gradient Reversal

    NARCIS (Netherlands)

    Emmery, Chris; Manjavacas, Enrique; Chrupala, Grzegorz

    2018-01-01

    Recent advances in computational stylometry have demonstrated that automatically inferring quite an extensive set of personal attributes from text alone (e.g. gender, age, education, socio-economic status, mental health issues) is not only feasible, but can often rely on little supervision. This

  4. k-visit Attribute Grammars

    DEFF Research Database (Denmark)

    Nielson, Hanne Riis; Skyum, S.

    1981-01-01

    It is shown that any well-defined attribute grammar is k-visit for some k. Furthermore, it is shown that given a well-defined grammar G and an integer k, it is decidable whether G is k-visit. Finally it is shown that the k-visit grammars specify a proper hierarchy with respect to translations...

  5. Morphosemantic Attributes of Meetei Proverbs

    Science.gov (United States)

    Singh, Lourembam Surjit

    2015-01-01

    This study proposes to investigate the functions of morphosemantic in Meetei proverbs, particularly the attribution of different meanings of the lexical items in Meetei Proverbial verbs. Meetei society has been using proverbs in the all ages, stages of development, social changes, and cultural diversifications to mark their wisdom of social…

  6. Abstract Interpretation Using Attribute Grammar

    DEFF Research Database (Denmark)

    Rosendahl, Mads

    1990-01-01

    This paper deals with the correctness proofs of attribute grammars using methods from abstract interpretation. The technique will be described by defining a live-variable analysis for a small flow-chart language and proving it correct with respect to a continuation style semantics. The proof...

  7. Field Demonstration of Ground-Source Integrated Heat Pump Part I. Technology and Field Demo System/Site Descriptions, and Preliminary Summer/Fall Performance Analysis for One Site

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Van D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Munk, Jeffrey D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gehl, Anthony C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-02-01

    The field study is planned to continue through the 2016 cooling season with the draft final project report due by September 30, 2016. This report provides a description of both installations and preliminary 2015 cooling and fall season performance results for the Knoxville site. For the August 18 through December 14 period, the Knoxville site GS-IHP provided 53.6% total source energy savings compared to a baseline electric RTU/heat pump and electric WH. Peak demand savings ranged from 33% to 59% per month. Energy cost savings of 53.1% have been achieved to date with more than half of that coming from reduced demand charges. Data on installation and maintenance costs are being collected and will be combined with total test period energy savings data for a payback analysis to be included in the project final report. The GS-IHP also saved a significant amount of carbon emissions. The total emission savings for the Knoxville site for the August-December 2015 period were ~0.8 metric tons. If trading for carbon credits ever becomes a reality, additional cost savings would be realized.

  8. Organizational Attributes, Market Growth, and Product Innovation

    NARCIS (Netherlands)

    Song, Michael; Chen, Yan

    2014-01-01

    Extensive research has shown that organizational attributes affect product innovation. Extending this literature, this article delimits two general categories of organizational attributes and relates them to product innovation. Organizational attributes can be either control oriented or flexibility

  9. 76 FR 80873 - Food Source Attribution; Public Meeting

    Science.gov (United States)

    2011-12-27

    ... outline or summary of an oral presentation, contact: Juanita Yates, FDA, Center for Food Safety and Applied Nutrition, telephone: (240) 402-1731, email: [email protected] . To request special... the meeting, contact Dr. David Goldman, Assistant Administrator, Office of Public Health Science, USDA...

  10. Attribution style, theory and empirical findings

    OpenAIRE

    Krohn, Charlotte

    2017-01-01

    Master i læring i komplekse systemer Attribution theory is a long-standing and widely discussed theory that addresses individuals’ explanation of causes of events. People attribute events of success and failure individually. Previous studies indicate that performance in sporting events may be improved by changing individuals’ attribution style. Article one describes attribution and attribution theory as state of the art. The article addresses the most important findings within attribution ...

  11. Disease proportions attributable to environment

    Directory of Open Access Journals (Sweden)

    Vineis Paolo

    2007-11-01

    Full Text Available Abstract Population disease proportions attributable to various causal agents are popular as they present a simplified view of the contribution of each agent to the disease load. However they are only summary figures that may be easily misinterpreted or over-interpreted even when the causal link between an exposure and an effect is well established. This commentary discusses several issues surrounding the estimation of attributable proportions, particularly with reference to environmental causes of cancers, and critically examines two recently published papers. These issues encompass potential biases as well as the very definition of environment and of environmental agent. The latter aspect is not just a semantic question but carries implications for the focus of preventive actions, whether centred on the material and social environment or on single individuals.

  12. Temporal context for authorship attribution

    DEFF Research Database (Denmark)

    Hansen, Niels Dalum; Lioma, Christina; Larsen, Birger

    2014-01-01

    A study of temporal aspects of authorship attribution - a task which aims to distinguish automatically between texts written by different authors by measuring textual features. This task is important in a number of areas, including plagiarism detection in secondary education, which we study...... world data from Danish secondary school students show 84% prediction accuracy when using all available material and 71.9% prediction accuracy when using only the five most recent writing samples from each student....

  13. Attribution methodologies for mobility impacts

    OpenAIRE

    KOTELNIKOVA WEILER, Natalia; LEURENT, Fabien; POULHES, Alexis

    2016-01-01

    Motorized transportation modes all consume energy and emit local pollutants ? chemical and noise. Congestion can also be considered as a local pollution caused by some emitters onto some receivers. Various methods have been designed to evaluate impacts and relate them to emitters and/or receivers. Called ?attribution? in environmental evaluation or ?imputation? in economic analysis, these schemes? purpose is to identify the causes of impacts and to design management or compensation schemes to...

  14. Zirconium-barrier cladding attributes

    International Nuclear Information System (INIS)

    Rosenbaum, H.S.; Rand, R.A.; Tucker, R.P.; Cheng, B.; Adamson, R.B.; Davies, J.H.; Armijo, J.S.; Wisner, S.B.

    1987-01-01

    This metallurgical study of Zr-barrier fuel cladding evaluates the importance of three salient attributes: (1) metallurgical bond between the zirconium liner and the Zircaloy substrate, (2) liner thickness (roughly 10% of the total cladding wall), and (3) softness (purity). The effect that each of these attributes has on the pellet-cladding interaction (PCI) resistance of the Zr-barrier fuel was studied by a combination of analytical model calculations and laboratory experiments using an expanding mandrel technique. Each of the attributes is shown to contribute to PCI resistance. The effect of the zirconium liner on fuel behavior during off-normal events in which steam comes in contact with the zirconium surface was studied experimentally. Simulations of loss-of-coolant accident (LOCA) showed that the behavior of Zr-barrier cladding is virtually indistinguishable from that of conventional Zircaloy cladding. If steam contacts the zirconium liner surface through a cladding perforation and the fuel rod is operated under normal power conditions, the zirconium liner is oxidized more rapidly than is Zircaloy, but the oxidation rate returns to the rate of Zircaloy oxidation when the oxide phase reaches the zirconium-Zircaloy metallurgical bond

  15. Social attribution in anorexia nervosa.

    Science.gov (United States)

    Oldershaw, Anna; DeJong, Hannah; Hambrook, David; Schmidt, Ulrike

    2018-05-01

    People with anorexia nervosa (AN) report socioemotional difficulties; however, measurement has been criticised for lacking ecological validity and the state or trait nature of difficulties remains unclear. Participants (n = 122) were recruited across 3 groups: people who are currently ill with AN (n = 40); people who recovered (RecAN, n = 18); healthy-control participants (n = 64). Participants completed clinical questionnaires and the Social Attribution Task. The Social Attribution Task involves describing an animation of moving shapes, scored for number of propositions offered, accuracy, and social relevance. Groups were compared cross-sectionally. Those with current AN were assessed prepsychological and postpsychological treatments. People with AN provided fewer propositions than other groups and fewer salient social attributions than healthy-control participants. Those who recovered scored intermediately and not significantly different from either group. Following treatment, people with AN demonstrated (nonsignificant) improvements, and no significance between group differences were observed. Findings suggest difficulties for people with AN in providing spontaneous social narrative and in identifying social salience. Copyright © 2018 John Wiley & Sons, Ltd and Eating Disorders Association.

  16. Attribution of climate extreme events

    Science.gov (United States)

    Trenberth, Kevin E.; Fasullo, John T.; Shepherd, Theodore G.

    2015-08-01

    There is a tremendous desire to attribute causes to weather and climate events that is often challenging from a physical standpoint. Headlines attributing an event solely to either human-induced climate change or natural variability can be misleading when both are invariably in play. The conventional attribution framework struggles with dynamically driven extremes because of the small signal-to-noise ratios and often uncertain nature of the forced changes. Here, we suggest that a different framing is desirable, which asks why such extremes unfold the way they do. Specifically, we suggest that it is more useful to regard the extreme circulation regime or weather event as being largely unaffected by climate change, and question whether known changes in the climate system's thermodynamic state affected the impact of the particular event. Some examples briefly illustrated include 'snowmaggedon' in February 2010, superstorm Sandy in October 2012 and supertyphoon Haiyan in November 2013, and, in more detail, the Boulder floods of September 2013, all of which were influenced by high sea surface temperatures that had a discernible human component.

  17. Morphosemantic Attributes of Meetei Proverbs

    Directory of Open Access Journals (Sweden)

    Lourembam Surjit Singh

    2015-06-01

    Full Text Available This study proposes to investigate the functions of morphosemantic in Meetei proverbs, particularly the attribution of different meanings of the lexical items in Meetei Proverbial verbs. Meetei society has been using proverbs in the all ages, stages of development, social changes, and cultural diversifications to mark their wisdom of social expertise. Meetei used proverbs as an important aspect of verbal discourses within the socio-cultural and ethno-civilization contexts in which skills, knowledge, ideas, emotion, and experiences are communicating. The language used in proverbs reflects the Meetei’s status of life, food habits, belief systems, philosophy, cultural and social orientations. At the same time, various meanings attribute in Meetei proverbs in the forms of figurative, witty, pithy, didactic etc. The construction of these forms are grammatically insightful thereby creating spaces for a whole range of possibilities for investigating the features, functions and structure of verbal inflectional markers occurred in Meetei proverbial sentences. Keywords: Proverbs, morphosemantics, features of lexical items, attributes of meanings and language

  18. Poster — Thur Eve — 24: Commissioning and preliminary measurements using an Attix-style free air ionization chamber for air kerma measurements on the BioMedical Imaging and Therapy beamlines at the Canadian Light Source

    International Nuclear Information System (INIS)

    Anderson, D; McEwen, M; Shen, H; Siegbahn, EA; Fallone, BG; Warkentin, B

    2014-01-01

    Synchrotron facilities, including the Canadian Light Source (CLS), provide opportunities for the development of novel imaging and therapy applications. A vital step progressing these applications toward clinical trials is the availability of accurate dosimetry. In this study, a refurbished Attix-style (cylindrical) free air chamber (FAC) is tested and used for preliminary air kerma measurements on the two BioMedical Imaging and Therapy (BMIT) beamlines at the CLS. The FAC consists of a telescoping chamber that relies on a difference measurement of collected charge in expanded and collapsed configurations. At the National Research Council's X-ray facility, a Victoreen Model 480 FAC was benchmarked against two primary standard FACs. The results indicated an absolute accuracy at the 0.5% level for energies between 60 and 150 kVp. A series of measurements were conducted on the small, non-uniform X-ray beams of the 05B1-1 (∼8 – 100 keV) and 05ID-2 (∼20 – 200 keV) beamlines for a variety of energies, filtrations and beam sizes. For the 05B1-1 beam with 1.1 mm of Cu filtration, recombination corrections of less than 5 % could only be achieved for field sizes no greater than 0.5 mm × 0.6 mm (corresponding to an air kerma rate of ∼ 57 Gy/min). Ionic recombination thus presents a significant challenge to obtaining accurate air kerma rate measurements using this FAC in these high intensity beams. Future work includes measurements using a smaller aperture to sample a smaller and thus more uniform beam area, as well as experimental and Monte Carlo-based investigation of correction factors

  19. Postdetonation nuclear debris for attribution.

    Science.gov (United States)

    Fahey, A J; Zeissler, C J; Newbury, D E; Davis, J; Lindstrom, R M

    2010-11-23

    On the morning of July 16, 1945, the first atomic bomb was exploded in New Mexico on the White Sands Proving Ground. The device was a plutonium implosion device similar to the device that destroyed Nagasaki, Japan, on August 9 of that same year. Recently, with the enactment of US public law 111-140, the "Nuclear Forensics and Attribution Act," scientists in the government and academia have been able, in earnest, to consider what type of forensic-style information may be obtained after a nuclear detonation. To conduct a robust attribution process for an exploded device placed by a nonstate actor, forensic analysis must yield information about not only the nuclear material in the device but about other materials that went into its construction. We have performed an investigation of glassed ground debris from the first nuclear test showing correlations among multiple analytical techniques. Surprisingly, there is strong evidence, obtainable only through microanalysis, that secondary materials used in the device can be identified and positively associated with the nuclear material.

  20. Recognizing and Imitating Programmer Style: Adversaries in Program Authorship Attribution

    Directory of Open Access Journals (Sweden)

    Simko Lucy

    2018-01-01

    Full Text Available Source code attribution classifiers have recently become powerful. We consider the possibility that an adversary could craft code with the intention of causing a misclassification, i.e., creating a forgery of another author’s programming style in order to hide the forger’s own identity or blame the other author. We find that it is possible for a non-expert adversary to defeat such a system. In order to inform the design of adversarially resistant source code attribution classifiers, we conduct two studies with C/C++ programmers to explore the potential tactics and capabilities both of such adversaries and, conversely, of human analysts doing source code authorship attribution. Through the quantitative and qualitative analysis of these studies, we (1 evaluate a state-of-the-art machine classifier against forgeries, (2 evaluate programmers as human analysts/forgery detectors, and (3 compile a set of modifications made to create forgeries. Based on our analyses, we then suggest features that future source code attribution systems might incorporate in order to be adversarially resistant.

  1. Contribution of morpho-physiological attributes in determining the ...

    African Journals Online (AJOL)

    Field experiments were conducted in 2006 and 2007 under subtropical conditions to investigate the variations in growth and reproductive characters, and yield attributes for selection of important source and sinks characters using correlation and path coefficient analyses in 45 mungbean genotypes. Large genetic variability ...

  2. The critical attributes of leadership.

    Science.gov (United States)

    Campbell, C A

    1992-11-01

    The final decade of this century is a period of unprecedented change that by all indicators will continue unabated well into the next millennium. This article explored some elemental and immutable truths about leadership, management, communication, and negotiation essential to organizational success, particularly during periods of accelerated change. The case is made for a level of integrity, ethical conduct, and self-control to match the technical competence essential for managerial success in a technologically intensive work environment. These attributes and skills coupled with a widening scope of institutional vision are critical to sustained leadership and growth in an unstable world. Those without these abilities will be diminished in their capacity to communicate or negotiate. Hence, they will be thwarted or powerless to create task attraction, to effect change, or to promote excellence. These lessons are applicable to the dynamic changes occurring within the health care industrial complex, including health information management.

  3. Neural correlates of depressive realism--an fMRI study on causal attribution in depression.

    Science.gov (United States)

    Seidel, Eva-Maria; Satterthwaite, Theodore D; Eickhoff, Simon B; Schneider, Frank; Gur, Ruben C; Wolf, Daniel H; Habel, Ute; Derntl, Birgit

    2012-05-01

    Biased causal attribution is a critical factor in the cognitive model of depression. Whereas depressed patients interpret events negatively, healthy people show a self-serving bias (internal attribution of positive events and external attribution of negative events). Using fMRI, depressed patients (n=15) and healthy controls (n=15) were confronted with positive and negative social events and made causal attributions (internal vs. external). Functional data were analyzed using a mixed effects model. Behaviourally, controls showed a self-serving bias, whereas patients demonstrated a balanced attributional pattern. Analysis of functional data revealed a significant group difference in a fronto-temporal network. Higher activation of this network was associated with non self-serving attributions in controls but self-serving attributions in patients. Applying a psycho-physiological interaction analysis, we observed reduced coupling between a dorsomedial PFC seed region and limbic areas during self-serving attributions in patients compared to controls. Results of the PPI analysis are preliminary given the liberal statistical threshold. The association of the behaviourally less frequent attributional pattern with activation in a fronto-temporal network suggests that non self-serving responses may produce a self-related response conflict in controls, while self-serving responses produce this conflict in patients. Moreover, attribution-modulated coupling between the dorsomedial PFC and limbic regions was weaker in patients than controls. This preliminary finding suggests that depression may be associated with disturbances in fronto-limbic coupling during attributional decisions. Our results implicate that treatment of major depression may benefit from approaches that facilitate reinterpretation of emotional events in a more positive, more self-serving way. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Neural correlates of depressive realism – An fMRI study on causal attribution in depression

    Science.gov (United States)

    Seidel, Eva-Maria; Satterthwaite, Theodore D.; Eickhoff, Simon B.; Schneider, Frank; Gur, Ruben C.; Wolf, Daniel H.; Habel, Ute; Derntl, Birgit

    2013-01-01

    Background Biased causal attribution is a critical factor in the cognitive model of depression. Whereas depressed patients interpret events negatively, healthy people show a self-serving bias (internal attribution of positive events and external attribution of negative events). Methods Using fMRI, depressed patients (n=15) and healthy controls (n=15) were confronted with positive and negative social events and made causal attributions (internal vs. external). Functional data were analyzed using a mixed effects model. Results Behaviourally, controls showed a self-serving bias, whereas patients demonstrated a balanced attributional pattern. Analysis of functional data revealed a significant group difference in a fronto-temporal network. Higher activation of this network was associated with non self-serving attributions in controls but self-serving attributions in patients. Applying a psycho-physiological interaction analysis, we observed reduced coupling between a dorsomedial PFC seed region and limbic areas during self-serving attributions in patients compared to controls. Limitations Results of the PPI analysis are preliminary given the liberal statistical threshold. Conclusions The association of the behaviourally less frequent attributional pattern with activation in a fronto-temporal network suggests that non self-serving responses may produce a self-related response conflict in controls, while self-serving responses produce this conflict in patients. Moreover, attribution-modulated coupling between the dorsomedial PFC and limbic regions was weaker in patients than controls. This preliminary finding suggests that depression may be associated with disturbances in fronto-limbic coupling during attributional decisions. Our results implicate that treatment of major depression may benefit from approaches that facilitate reinterpretation of emotional events in a more positive, more self-serving way. PMID:22377511

  5. Broadband spectrally dynamic solid state illumination source

    Energy Technology Data Exchange (ETDEWEB)

    Nicol, David B; Asghar, Ali; Gupta, Shalini; Kang, Hun; Pan, Ming [Georgia Institute of Technology, School of Electrical and Computer Engineering, Atlanta, GA 30332-0250 (United States); Strassburg, Martin [Georgia Institute of Technology, School of Electrical and Computer Engineering, Atlanta, GA 30332-0250 (United States); Georgia State University, Department of Physics and Astronomy, Atlanta, GA 30302-4106 (United States); Summers, Chris; Ferguson, Ian T [Georgia Institute of Technology, School of Materials Science and Engineering, Atlanta, GA 30332 (United States)

    2006-06-15

    Solid state lighting has done well recently in niche markets such as signage and displays, however, no available SSL technologies incorporate all the necessary attributes for general illumination. Development of a novel solid state general illumination source is discussed here. Two LEDs emitting at two distinct wavelengths can be monolithically grown and used to excite two or more phosphors with varied excitation spectra. The combined phosphorescence spectrum can then be controlled by adjusting the relative intensities of the two LED emissions. Preliminary phosphor analysis shows such a scheme to be viable for use in a spectrally dynamic broadband general illumination source. A tunnel junction is envisioned as a means of current spreading in a buried layer for three terminal operation. However, tunnel junction properties in GaN based materials are not well understood, and require further optimization to be practical devices. Preliminary results on GaN tunnel junctions are presented here as well. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  6. Preliminary Monthly Climatological Summaries

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Preliminary Local Climatological Data, recorded since 1970 on Weather Burean Form 1030 and then National Weather Service Form F-6. The preliminary climate data pages...

  7. Nutritional attributes of bakery products

    Science.gov (United States)

    Wheat bread has been and continues to be an important source of caloric energy and protein for the people of many continents for thousands of years. In recent years bread, mostly white wheat bread, has also contributed to, but in its whole grain forms may also ameliorate the chronic diseases, assoc...

  8. Attributes and descriptors for building performance evaluation

    Directory of Open Access Journals (Sweden)

    S. Gopikrishnan

    2017-12-01

    In order to obtain the right feedback in levels of satisfaction with respect to these attributes, there is a need to have appropriate descriptors for incorporation in a survey instrument. This paper identifies attributes that indicate building performance and provides simple description of these attributes based on which items can be generated for a questionnaire. Such items can enable any user/occupant to easily understand the characteristics of these attributes and offer an objective feedback during questionnaire survey.

  9. Occupational safety management: the role of causal attribution.

    Science.gov (United States)

    Gyekye, Seth Ayim

    2010-12-01

    The paper addresses the causal attribution theory, an old and well-established theme in social psychology which denotes the everyday, commonsense explanations that people use to explain events and the world around them. The attribution paradigm is considered one of the most appropriate analytical tools for exploratory and descriptive studies in social psychology and organizational literature. It affords the possibility of describing accident processes as objectively as possible and with as much detail as possible. Causal explanations are vital to the formal analysis of workplace hazards and accidents, as they determine how organizations act to prevent accident recurrence. Accordingly, they are regarded as fundamental and prerequisite elements for safety management policies. The paper focuses primarily on the role of causal attributions in occupational and industrial accident analyses and implementation of safety interventions. It thus serves as a review of the contribution of attribution theory to occupational and industrial accidents. It comprises six sections. The first section presents an introduction to the classic attribution theories, and the second an account of the various ways in which the attribution paradigm has been applied in organizational settings. The third and fourth sections review the literature on causal attributions and demographic and organizational variables respectively. The sources of attributional biases in social psychology and how they manifest and are identified in the causal explanations for industrial and occupational accidents are treated in the fifth section. Finally, conclusion and recommendations are presented. The recommendations are particularly important for the reduction of workplace accidents and associated costs. The paper touches on the need for unbiased causal analyses, belief in the preventability of accidents, and the imperative role of management in occupational safety management.

  10. Attribution Theory and Crisis Intervention Therapy.

    Science.gov (United States)

    Skilbeck, William M.

    It was proposed that existing therapeutic procedures may influence attributions about emotional states. Therefore an attributional analysis of crisis intervention, a model of community-based, short-term consultation, was presented. This analysis suggested that crisis intervention provides attributionally-relevant information about both the source…

  11. Evolutionary Influences on Attribution and Affect

    Directory of Open Access Journals (Sweden)

    Jennie Brown

    2017-12-01

    Full Text Available Evolutionary theory was applied to Reeder and Brewer's schematic theory and Trafimow's affect theory to extend this area of research with five new predictions involving affect and ability attributions, comparing morality and ability attributions, gender differences, and reaction times for affect and attribution ratings. The design included a 2 (Trait Dimension Type: HR, PR × 2 (Behavior Type: morality, ability × 2 (Valence: positive, negative × 2 (Replication: original, replication × 2 (Sex: female or male actor × 2 (Gender: female or male participant × 2 (Order: attribution portion first, affect portion first mixed design. All factors were within participants except the order and participant gender. Participants were presented with 32 different scenarios in which an actor engaged in a concrete behavior after which they made attributions and rated their affect in response to the behavior. Reaction times were measured during attribution and affect ratings. In general, the findings from the experiment supported the new predictions. Affect was related to attributions for both morality and ability related behaviors. Morality related behaviors received more extreme attribution and affect ratings than ability related behaviors. Female actors received stronger attribution and affect ratings for diagnostic morality behaviors compared to male actors. Male and female actors received similar attribution and affect ratings for diagnostic ability behaviors. Diagnostic behaviors were associated with lower reaction times than non-diagnostic behaviors. These findings demonstrate the utility of evolutionary theory in creating new hypotheses and empirical findings in the domain of attribution.

  12. [3+2] Cycloadditions of 1-halo-1-nitroethenes with (Z-C-(3,4,5-trimethoxyphenyl-N-methyl-nitrone as regio- and stereocontrolled source of novel bioactive compounds: preliminary studies

    Directory of Open Access Journals (Sweden)

    Radomir Jasiński

    2016-07-01

    Full Text Available Preliminary experiments shows, that [3+2] cycloadditions reactions proceeds with full regioselectivity and high stereoselectivity. In consequence, 3,4-trans-2-methyl-3-(3,4,5-trimethoxyphenyl-4-halo-4-nitroisoxazolidines are forming as predominantly (or sole products. Additionally, prognosis for the synthesized compounds to be potential ingredients of drugs is good.

  13. Attributional and relational processing in pigeons

    Directory of Open Access Journals (Sweden)

    Dennis eGarlick

    2011-02-01

    Full Text Available Six pigeons were trained using a matching-to-sample procedure where sample and rewarded comparisons matched on both attributional (color and relational (horizontal or vertical orientation dimensions. Probes then evaluated the pigeons’ preference to comparisons that varied in these dimensions. A strong preference was found for the attribute of color. The discrimination was not found to transfer to novel colors, however, suggesting that a general color rule had not been learned. Further, when color could not be used to guide responding, some influence of other attributional cues such as shape, but not relational cues, was found. We conclude that pigeons based their performance on attributional properties of but not on relational properties between elements in our matching-to-sample procedure.. Future studies should look at examining other attributes to compare attributional versus relational processing.

  14. Privacy Protection on Multiple Sensitive Attributes

    Science.gov (United States)

    Li, Zhen; Ye, Xiaojun

    In recent years, a privacy model called k-anonymity has gained popularity in the microdata releasing. As the microdata may contain multiple sensitive attributes about an individual, the protection of multiple sensitive attributes has become an important problem. Different from the existing models of single sensitive attribute, extra associations among multiple sensitive attributes should be invested. Two kinds of disclosure scenarios may happen because of logical associations. The Q&S Diversity is checked to prevent the foregoing disclosure risks, with an α Requirement definition used to ensure the diversity requirement. At last, a two-step greedy generalization algorithm is used to carry out the multiple sensitive attributes processing which deal with quasi-identifiers and sensitive attributes respectively. We reduce the overall distortion by the measure of Masking SA.

  15. Attribute Learning for SAR Image Classification

    Directory of Open Access Journals (Sweden)

    Chu He

    2017-04-01

    Full Text Available This paper presents a classification approach based on attribute learning for high spatial resolution Synthetic Aperture Radar (SAR images. To explore the representative and discriminative attributes of SAR images, first, an iterative unsupervised algorithm is designed to cluster in the low-level feature space, where the maximum edge response and the ratio of mean-to-variance are included; a cross-validation step is applied to prevent overfitting. Second, the most discriminative clustering centers are sorted out to construct an attribute dictionary. By resorting to the attribute dictionary, a representation vector describing certain categories in the SAR image can be generated, which in turn is used to perform the classifying task. The experiments conducted on TerraSAR-X images indicate that those learned attributes have strong visual semantics, which are characterized by bright and dark spots, stripes, or their combinations. The classification method based on these learned attributes achieves better results.

  16. Attributional Style and Depression in Multiple Sclerosis

    Science.gov (United States)

    Arnett, Peter A.

    2013-01-01

    Several etiologic theories have been proposed to explain depression in the general population. Studying these models and modifying them for use in the multiple sclerosis (MS) population may allow us to better understand depression in MS. According to the reformulated learned helplessness (LH) theory, individuals who attribute negative events to internal, stable, and global causes are more vulnerable to depression. This study differentiated attributional style that was or was not related to MS in 52 patients with MS to test the LH theory in this population and to determine possible differences between illness-related and non-illness-related attributions. Patients were administered measures of attributional style, daily stressors, disability, and depressive symptoms. Participants were more likely to list non-MS-related than MS-related causes of negative events on the Attributional Style Questionnaire (ASQ), and more-disabled participants listed significantly more MS-related causes than did less-disabled individuals. Non-MS-related attributional style correlated with stress and depressive symptoms, but MS-related attributional style did not correlate with disability or depressive symptoms. Stress mediated the effect of non-MS-related attributional style on depressive symptoms. These results suggest that, although attributional style appears to be an important construct in MS, it does not seem to be related directly to depressive symptoms; rather, it is related to more perceived stress, which in turn is related to increased depressive symptoms. PMID:24453767

  17. Key attributes of expert NRL referees.

    Science.gov (United States)

    Morris, Gavin; O'Connor, Donna

    2017-05-01

    Experiential knowledge of elite National Rugby League (NRL) referees was investigated to determine the key attributes contributing to expert officiating performance. Fourteen current first-grade NRL referees were asked to identify the key attributes they believed contributed to their expert refereeing performance. The modified Delphi method involved a 3-round process of an initial semi-structured interview followed by 2 questionnaires to reach consensus of opinion. The data revealed 25 attributes that were rated as most important that underpin expert NRL refereeing performance. Results illustrate the significance of the cognitive category, with the top 6 ranked attributes all cognitive skills. Of these, the referees ranked decision-making accuracy as the most important attribute, followed by reading the game, communication, game understanding, game management and knowledge of the rules. Player rapport, positioning and teamwork were the top ranked game skill attributes underpinning performance excellence. Expert referees also highlighted a number of psychological attributes (e.g., concentration, composure and mental toughness) that were significant to performance. There were only 2 physiological attributes (fitness, aerobic endurance) that were identified as significant to elite officiating performance. In summary, expert consensus was attained which successfully provided a hierarchy of the most significant attributes of expert NRL refereeing performance.

  18. Quality Attributes and Service-Oriented Architectures

    National Research Council Canada - National Science Library

    O'Brien, Liam; Bass, Len; Merson, Paulo

    2005-01-01

    .... Because software architecture is the bridge between mission/business goals and a software-intensive system, and quality attribute requirements drive software architecture design, it is important...

  19. Schools K-12, School locations within Sedgwick County. This layer is maintained interactively by GIS staff. Primary attributes include school name, class, funding source, address, and parachial status. Published to scschoop.shp., Published in 2008, 1:1200 (1in=100ft) scale, Sedgwick County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Schools K-12 dataset current as of 2008. School locations within Sedgwick County. This layer is maintained interactively by GIS staff. Primary attributes include...

  20. Cardiomagnetic source imaging

    OpenAIRE

    Pesola, Katja

    2000-01-01

    Magnetocardiographic (MCG) source imaging has received increasing interest in recent years. With a high enough localization accuracy of the current sources in the heart, valuable information can be provided, e.g., for the pre-ablative evaluation of arrhythmia patients. Furthermore, preliminary studies indicate that ischemic areas, i.e. areas which are suffering from lack of oxygen, and infarcted regions could be localized from multichannel MCG recordings. In this thesis, the accuracy of cardi...

  1. Preliminary radiation shielding design for BOOMERANG

    International Nuclear Information System (INIS)

    Donahue, Richard J.

    2002-01-01

    Preliminary radiation shielding specifications are presented here for the 3 GeV BOOMERANG Australian synchrotron light source project. At this time the bulk shield walls for the storage ring and injection system (100 MeV Linac and 3 GeV Booster) are considered for siting purposes

  2. Accounting Students' Perceptions of Effective Faculty Attributes

    Science.gov (United States)

    Alfraih, Mishari M.; Alanezi, Faisal S.

    2016-01-01

    Purpose: This study aims to explore the attributes of an effective accounting faculty from the student perspective. It also examines similarities and differences in the perceived importance of these attributes between bachelor's and associate's accounting degree students in two public higher education institutions in Kuwait, namely, Kuwait…

  3. Anonymous Credential Schemes with Encrypted Attributes

    NARCIS (Netherlands)

    Guajardo Merchan, J.; Mennink, B.; Schoenmakers, B.

    2011-01-01

    In anonymous credential schemes, users obtain credentials on certain attributes from an issuer, and later show these credentials to a relying party anonymously and without fully disclosing the attributes. In this paper, we introduce the notion of (anonymous) credential schemes with encrypted

  4. Attributes Heeded When Representing an Osmosis Problem.

    Science.gov (United States)

    Zuckerman, June Trop

    Eighteen high school science students were involved in a study to determine what attributes in the problem statement they need when representing a typical osmosis problem. In order to realize this goal students were asked to solve problems aloud and to explain their answers. Included as a part of the results are the attributes that the students…

  5. Attributional Models of Depression and Marital Distress.

    Science.gov (United States)

    Horneffer, Karen J.; Fincham, Frank D.

    1996-01-01

    Compares attributional models presented in depression and marital literatures by examining simultaneously their prediction of depressive symptoms and marital distress with 150 married couples. Findings show that a model including paths from depressogenic and distress-maintaining marital attributions to both depressive symptoms and marital distress…

  6. Crisis Workers' Attributions for Domestic Violence.

    Science.gov (United States)

    Madden, Margaret E.

    Attributions affect coping with victimization. Battered women who blame their husbands' moods are less likely to leave than are women who blame their husbands' permanent characteristics for the violence. Abused women often have repeated contacts with crisis intervention workers and the attitudes of those workers may affect the attributions made by…

  7. An Exploration of EFL Teachers' Attributions

    Science.gov (United States)

    Ghonsooly, Behzad; Ghanizadeh, Afsaneh; Ghazanfari, Mohammad; Ghabanchi, Zargham

    2015-01-01

    The present study investigated English as a foreign language (EFL) teachers' attributions of success and failure. It also set out to investigate whether these attributions vary by teachers' age, teaching experience, gender and educational level. To do so, 200 EFL teachers were selected according to convenience sampling among EFL teachers teaching…

  8. Implicational Schemata and the Attribution of Morality.

    Science.gov (United States)

    Reeder, Glenn D.; Spores, John M.

    Attribution of a disposition or trait to a person asserts information about the pattern of that person's behavior. Past research has suggested that a moral disposition implies only moral behavior, while an immoral disposition implies both moral and immoral behavior. The effect of these implicational schemata on attributions of morality was…

  9. Attribute-Based Digital Signature System

    NARCIS (Netherlands)

    Ibraimi, L.; Asim, Muhammad; Petkovic, M.

    2011-01-01

    An attribute-based digital signature system comprises a signature generation unit (1) for signing a message (m) by generating a signature (s) based on a user secret key (SK) associated with a set of user attributes, wherein the signature generation unit (1) is arranged for combining the user secret

  10. Detection and attribution of observed impacts

    NARCIS (Netherlands)

    Cramer, W.; Yohe, G.W.; Auffhammer, M.; Huggel, C.; Molau, U.; Dias, M.A.F.S.; Leemans, R.

    2014-01-01

    This chapter synthesizes the scientific literature on the detection and attribution of observed changes in natural and human systems in response to observed recent climate change. For policy makers and the public, detection and attribution of observed impacts will be a key element to determine the

  11. Smoking-Attributable Mortality, Morbidity, and Economic Costs (SAMMEC) - Smoking-Attributable Mortality (SAM)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2005-2009. SAMMEC - Smoking-Attributable Mortality, Morbidity, and Economic Costs. Smoking-attributable mortality (SAM) is the number of deaths caused by cigarette...

  12. Smoking-Attributable Mortality, Morbidity, and Economic Costs (SAMMEC) - Smoking-Attributable Expenditures (SAE)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2005-2009. SAMMEC - Smoking-Attributable Mortality, Morbidity, and Economic Costs. Smoking-attributable expenditures (SAEs) are excess health care expenditures...

  13. Identifying attributes of food literacy: a scoping review.

    Science.gov (United States)

    Azevedo Perry, Elsie; Thomas, Heather; Samra, H Ruby; Edmonstone, Shannon; Davidson, Lyndsay; Faulkner, Amy; Petermann, Lisa; Manafò, Elizabeth; Kirkpatrick, Sharon I

    2017-09-01

    An absence of food literacy measurement tools makes it challenging for nutrition practitioners to assess the impact of food literacy on healthy diets and to evaluate the outcomes of food literacy interventions. The objective of the present scoping review was to identify the attributes of food literacy. A scoping review of peer-reviewed and grey literature was conducted and attributes of food literacy identified. Subjects included in the search were high-risk groups. Eligible articles were limited to research from Canada, USA, the UK, Australia and New Zealand. The search identified nineteen peer-reviewed and thirty grey literature sources. Fifteen identified food literacy attributes were organized into five categories. Food and Nutrition Knowledge informs decisions about intake and distinguishing between 'healthy' and 'unhealthy' foods. Food Skills focuses on techniques of food purchasing, preparation, handling and storage. Self-Efficacy and Confidence represent one's capacity to perform successfully in specific situations. Ecologic refers to beyond self and the interaction of macro- and microsystems with food decisions and behaviours. Food Decisions reflects the application of knowledge, information and skills to make food choices. These interdependent attributes are depicted in a proposed conceptual model. The lack of evaluated tools inhibits the ability to assess and monitor food literacy; tailor, target and evaluate programmes; identify gaps in programming; engage in advocacy; and allocate resources. The present scoping review provides the foundation for the development of a food literacy measurement tool to address these gaps.

  14. The effect of extrinsic attributes on liking of cottage cheese.

    Science.gov (United States)

    Hubbard, E M; Jervis, S M; Drake, M A

    2016-01-01

    Preference mapping studies with cottage cheese have demonstrated that cottage cheese liking is influenced by flavor, texture, curd size, and dressing content. However, extrinsic factors such as package, label claims, and brand name may also influence liking and have not been studied. The objective of this study was to evaluate the role of package attributes and brand on the liking of cottage cheese. A conjoint survey with Kano analysis (n=460) was conducted to explore the effect of extrinsic attributes (brand, label claim, milkfat content, and price) on liking. Following the survey, 150 consumers evaluated intrinsic attributes of 7 cottage cheeses with and without brand information in a 2-d crossover design. Results were evaluated by 2-way ANOVA and multivariate analyses. Milkfat content and price had the highest influence on liking by conjoint analysis. Cottage cheese with 2% milkfat and a low price was preferred. Specific label claims such as "excellent source of calcium (>10%)" were more attractive to consumers than "low sodium" or "extra creamy." Branding influenced overall liking and purchase intent for cottage cheeses to differing degrees. For national brands, acceptance scores were enhanced in the presence of the brand. An all-natural claim was more appealing than organic by conjoint analysis and this result was also confirmed with consumer acceptance testing. Findings from this study can help manufacturers, as well as food marketers, better target their products and brands with attributes that drive consumer choice. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  15. Discriminative power of visual attributes in dermatology.

    Science.gov (United States)

    Giotis, Ioannis; Visser, Margaretha; Jonkman, Marcel; Petkov, Nicolai

    2013-02-01

    Visual characteristics such as color and shape of skin lesions play an important role in the diagnostic process. In this contribution, we quantify the discriminative power of such attributes using an information theoretical approach. We estimate the probability of occurrence of each attribute as a function of the skin diseases. We use the distribution of this probability across the studied diseases and its entropy to define the discriminative power of the attribute. The discriminative power has a maximum value for attributes that occur (or do not occur) for only one disease and a minimum value for those which are equally likely to be observed among all diseases. Verrucous surface, red and brown colors, and the presence of more than 10 lesions are among the most informative attributes. A ranking of attributes is also carried out and used together with a naive Bayesian classifier, yielding results that confirm the soundness of the proposed method. proposed measure is proven to be a reliable way of assessing the discriminative power of dermatological attributes, and it also helps generate a condensed dermatological lexicon. Therefore, it can be of added value to the manual or computer-aided diagnostic process. © 2012 John Wiley & Sons A/S.

  16. Extending Attribution Theory: Considering Students' Perceived Control of the Attribution Process

    Science.gov (United States)

    Fishman, Evan J.; Husman, Jenefer

    2017-01-01

    Research in attribution theory has shown that students' causal thinking profoundly affects their learning and motivational outcomes. Very few studies, however, have explored how students' attribution-related beliefs influence the causal thought process. The present study used the perceived control of the attribution process (PCAP) model to examine…

  17. Causal Attributions for Poverty in Developing Countries

    Directory of Open Access Journals (Sweden)

    José Juan Vázquez

    2009-07-01

    Full Text Available This paper analyzes attributional differences about causes of poverty in the less developed countries, among Nicaraguan ("actors" and Spanish ("observers" undergraduates. A self–applied questionnaire was used. It included socio–demographic questions and an adaptation of the "Causes of Third World Poverty Questionnaire" (CTWPQ. Results show agreement between Spanish and Nicaraguan in attributions about the main causes of poverty in the less developed countries, although there are differences about the perception of the incidence of the different causes in that situation. Nicaraguan students consider, as causes of poverty, more dispositional attributes about the population in those countries.

  18. The Role of Empathy in Mental Attribution

    Directory of Open Access Journals (Sweden)

    Brunsteins, Patricia

    2011-05-01

    Full Text Available This work examines in what extent a notion of empathy may clarify mindreading’s debate. Taking into account an interdisciplinary and integrative notion of empathy, compatibility with mental attribution strategies both mental simulation and theory-theory, in non pure versions, is evaluated. Firstly, new empirical research is supposed to contribute strengthening an integrative empathy instead of theory-theory or mental simulation `s points of view. Secondly, new empirical research will bring better tools to distinguish between empathy and simulation. Consequently, the relationship between empathy and mental attribution theories may be better delimited and a full mental attribution theory may possibly be proposed.

  19. Biota Modeling in EPA's Preliminary Remediation Goal and Dose Compliance Concentration Calculators for Use in EPA Superfund Risk Assessment: Explanation of Intake Rate Derivation, Transfer Factor Compilation, and Mass Loading Factor Sources

    Energy Technology Data Exchange (ETDEWEB)

    Manning, Karessa L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dolislager, Fredrick G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bellamy, Michael B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-11-01

    The Preliminary Remediation Goal (PRG) and Dose Compliance Concentration (DCC) calculators are screening level tools that set forth Environmental Protection Agency's (EPA) recommended approaches, based upon currently available information with respect to risk assessment, for response actions at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites, commonly known as Superfund. The screening levels derived by the PRG and DCC calculators are used to identify isotopes contributing the highest risk and dose as well as establish preliminary remediation goals. Each calculator has a residential gardening scenario and subsistence farmer exposure scenarios that require modeling of the transfer of contaminants from soil and water into various types of biota (crops and animal products). New publications of human intake rates of biota; farm animal intakes of water, soil, and fodder; and soil to plant interactions require updates be implemented into the PRG and DCC exposure scenarios. Recent improvements have been made in the biota modeling for these calculators, including newly derived biota intake rates, more comprehensive soil mass loading factors (MLFs), and more comprehensive soil to tissue transfer factors (TFs) for animals and soil to plant transfer factors (BV's). New biota have been added in both the produce and animal products categories that greatly improve the accuracy and utility of the PRG and DCC calculators and encompass greater geographic diversity on a national and international scale.

  20. Biota Modeling in EPA's Preliminary Remediation Goal and Dose Compliance Concentration Calculators for Use in EPA Superfund Risk Assessment: Explanation of Intake Rate Derivation, Transfer Factor Compilation, and Mass Loading Factor Sources

    International Nuclear Information System (INIS)

    Manning, Karessa L.; Dolislager, Fredrick G.; Bellamy, Michael B.

    2016-01-01

    The Preliminary Remediation Goal (PRG) and Dose Compliance Concentration (DCC) calculators are screening level tools that set forth Environmental Protection Agency's (EPA) recommended approaches, based upon currently available information with respect to risk assessment, for response actions at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites, commonly known as Superfund. The screening levels derived by the PRG and DCC calculators are used to identify isotopes contributing the highest risk and dose as well as establish preliminary remediation goals. Each calculator has a residential gardening scenario and subsistence farmer exposure scenarios that require modeling of the transfer of contaminants from soil and water into various types of biota (crops and animal products). New publications of human intake rates of biota; farm animal intakes of water, soil, and fodder; and soil to plant interactions require updates be implemented into the PRG and DCC exposure scenarios. Recent improvements have been made in the biota modeling for these calculators, including newly derived biota intake rates, more comprehensive soil mass loading factors (MLFs), and more comprehensive soil to tissue transfer factors (TFs) for animals and soil to plant transfer factors (BV's). New biota have been added in both the produce and animal products categories that greatly improve the accuracy and utility of the PRG and DCC calculators and encompass greater geographic diversity on a national and international scale.

  1. Assessing students' beliefs, emotions and causal attribution ...

    African Journals Online (AJOL)

    Keywords: academic emotion; belief; causal attribution; statistical validation; students' conceptions of learning ... Sadi & Lee, 2015), through their effect on motivation and learning strategies .... to understand why they may or may not be doing.

  2. Calibration of Seismic Attributes for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Pennington, Wayne D.

    2002-05-29

    This project is intended to enhance the ability to use seismic data for the determination of rock and fluid properties through an improved understanding of the physics underlying the relationships between seismic attributes and formation.

  3. Object attributes combine additively in visual search.

    Science.gov (United States)

    Pramod, R T; Arun, S P

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in internal details, such as texture; (c) differences in emergent attributes, such as symmetry; and (d) differences in global properties, such as orientation or overall configuration of parts. Our results elucidate an enduring question in object vision by showing that the whole object is not a sum of its parts but a sum of its many attributes.

  4. Design-Build Partnership Attributes Survey Analysis

    National Research Council Canada - National Science Library

    Pyle, Raymond

    1998-01-01

    Two basic hypotheses were investigated: 1. Finding these attributes for success for a design-build partnership may be accomplished by transferring concepts and ideas from business research on partnership formation. 2...

  5. Architectural patterns and quality attributes interaction

    NARCIS (Netherlands)

    Me, G.; Calero Munoz, C.; Lago, P.; Muccini, H.

    2016-01-01

    Architectural patterns and styles represent common solutions to recurrent problems. They encompass architectural knowledge about how to achieve holistic system quality. The relation between patterns (or styles) and quality attributes has been regularly addressed in the literature. However, there is

  6. PRELIMINARY BIOGEOCHEMICAL DATA ON MICROBIAL CARBONATOGENESIS IN ANCIENT EXTREME ENVIRONMENTS (KESS-KESS MOUNDS, MOROCCO

    Directory of Open Access Journals (Sweden)

    ADRIANO GUIDO

    2013-03-01

    Full Text Available The Devonian Kess-Kess mounds, cropping out in the Hamar Laghdad Ridge (SE Morocco, provide a useful case-study for understanding the relationships between the microbial metabolic activities and micrite precipitation in an extreme environment. Very fine dark and white wrinkled laminae record microbial activity and the geochemistry of the organic matter allows the  characterization of the source organisms. The biogeochemical characterization of extracted organic matter was performed through the functional group analyses by FT-IR Spectroscopy. FT-IR parameters indicate a marine origin and low thermal evolution for the organic material. The organic matter is characterized by the presence of stretching ?C=C vibrations attributable to alkene and/or unsaturated carboxylic acids. Preliminary analysis with GC-MS provides evidence for an autochthonous (source for the free carboxylic acids. The origin of short-chain fatty acids that have a marked even over odd C number predominance is attributable to bacteria and/or algae and they are similar to those recorded in recent (Black Sea and ancient (Late Jurassic to Early Cretaceous methane-seep microbialites. These biogeochemical signatures of microbial carbonate precipitation in an ancient extreme environment may have implications in astrobiological research considering the recent discovery of carbonate deposits on Mars. 

  7. Attributable causes of colorectal cancer in China

    OpenAIRE

    Gu, Meng-Jia; Huang, Qiu-Chi; Bao, Cheng-Zhen; Li, Ying-Jun; Li, Xiao-Qin; Ye, Ding; Ye, Zhen-Hua; Chen, Kun; Wang, Jian-Bing

    2018-01-01

    Background Colorectal cancer is the 4th common cancer in China. Most colorectal cancers are due to modifiable lifestyle factors, but few studies have provided a systematic evidence-based assessment of the burden of colorectal cancer incidence and mortality attributable to the known risk factors in China. Methods We estimated the population attributable faction (PAF) for each selected risk factor in China, based on the prevalence of exposure around 2000 and relative risks from cohort studies a...

  8. Object attributes combine additively in visual search

    OpenAIRE

    Pramod, R. T.; Arun, S. P.

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in in...

  9. Corporate apologia and the attribution of guilt

    OpenAIRE

    Bülow-Møller, Anne Marie

    2010-01-01

    This paper argues that in the difficult disciplines of crisis communication and image restoration, attribution theory has explanatory value. Corporate apologia – the explanations that an organisation offers after an attack on – differs with the type of crisis it is designed to diffuse, and if the crisis concerns legitimacy, the art is to shift the public attribution of guilt or responsibility. The case of Arla vs Hirtshals is used to demonstrate how a concerted effort in impression management...

  10. Language Learner Beliefs from an Attributional Perspective

    OpenAIRE

    Gabillon, Zehra

    2013-01-01

    International audience; This qualitative study, aimed to analyze eight French-speaking learners' beliefs about English and English language learning. The data were obtained via semi-structured interviews. The study drew on Weiner's attribution theory of achievement motivation and Bandura's self-efficacy theory. The novelty about this research is the employment of an attributional analysis framework to study and explain the learners' stated beliefs about English and English language learning.

  11. Causal Attributions for Poverty in Developing Countries

    OpenAIRE

    José Juan Vázquez; Sonia Panadero

    2009-01-01

    This paper analyzes attributional differences about causes of poverty in the less developed countries, among Nicaraguan ("actors") and Spanish ("observers") undergraduates. A self–applied questionnaire was used. It included socio–demographic questions and an adaptation of the "Causes of Third World Poverty Questionnaire" (CTWPQ). Results show agreement between Spanish and Nicaraguan in attributions about the main causes of poverty in the less developed countries, although there are difference...

  12. Improving the Accuracy of Attribute Extraction using the Relatedness between Attribute Values

    Science.gov (United States)

    Bollegala, Danushka; Tani, Naoki; Ishizuka, Mitsuru

    Extracting attribute-values related to entities from web texts is an important step in numerous web related tasks such as information retrieval, information extraction, and entity disambiguation (namesake disambiguation). For example, for a search query that contains a personal name, we can not only return documents that contain that personal name, but if we have attribute-values such as the organization for which that person works, we can also suggest documents that contain information related to that organization, thereby improving the user's search experience. Despite numerous potential applications of attribute extraction, it remains a challenging task due to the inherent noise in web data -- often a single web page contains multiple entities and attributes. We propose a graph-based approach to select the correct attribute-values from a set of candidate attribute-values extracted for a particular entity. First, we build an undirected weighted graph in which, attribute-values are represented by nodes, and the edge that connects two nodes in the graph represents the degree of relatedness between the corresponding attribute-values. Next, we find the maximum spanning tree of this graph that connects exactly one attribute-value for each attribute-type. The proposed method outperforms previously proposed attribute extraction methods on a dataset that contains 5000 web pages.

  13. Attributional processes in the learned helplessness paradigm: behavioral effects of global attributions.

    Science.gov (United States)

    Mikulincer, M

    1986-12-01

    Following the learned helplessness paradigm, I assessed in this study the effects of global and specific attributions for failure on the generalization of performance deficits in a dissimilar situation. Helplessness training consisted of experience with noncontingent failures on four cognitive discrimination problems attributed to either global or specific causes. Experiment 1 found that performance in a dissimilar situation was impaired following exposure to globally attributed failure. Experiment 2 examined the behavioral effects of the interaction between stable and global attributions of failure. Exposure to unsolvable problems resulted in reduced performance in a dissimilar situation only when failure was attributed to global and stable causes. Finally, Experiment 3 found that learned helplessness deficits were a product of the interaction of global and internal attribution. Performance deficits following unsolvable problems were recorded when failure was attributed to global and internal causes. Results were discussed in terms of the reformulated learned helplessness model.

  14. Attribution bias and social anxiety in schizophrenia

    Directory of Open Access Journals (Sweden)

    Amelie M. Achim

    2016-06-01

    Full Text Available Studies on attribution biases in schizophrenia have produced mixed results, whereas such biases have been more consistently reported in people with anxiety disorders. Anxiety comorbidities are frequent in schizophrenia, in particular social anxiety disorder, which could influence their patterns of attribution biases. The objective of the present study was thus to determine if individuals with schizophrenia and a comorbid social anxiety disorder (SZ+ show distinct attribution biases as compared with individuals with schizophrenia without social anxiety (SZ− and healthy controls. Attribution biases were assessed with the Internal, Personal, and Situational Attributions Questionnaire in 41 individual with schizophrenia and 41 healthy controls. Results revealed the lack of the normal externalizing bias in SZ+, whereas SZ− did not significantly differ from healthy controls on this dimension. The personalizing bias was not influenced by social anxiety but was in contrast linked with delusions, with a greater personalizing bias in individuals with current delusions. Future studies on attribution biases in schizophrenia should carefully document symptom presentation, including social anxiety.

  15. Noncognitive Attributes in Physician Assistant Education.

    Science.gov (United States)

    Brenneman, Anthony E; Goldgar, Constance; Hills, Karen J; Snyder, Jennifer H; VanderMeulen, Stephane P; Lane, Steven

    2018-03-01

    Physician assistant (PA) admissions processes have typically given more weight to cognitive attributes than to noncognitive ones, both because a high level of cognitive ability is needed for a career in medicine and because cognitive factors are easier to measure. However, there is a growing consensus across the health professions that noncognitive attributes such as emotional intelligence, empathy, and professionalism are important for success in clinical practice and optimal care of patients. There is also some evidence that a move toward more holistic admissions practices, including evaluation of noncognitive attributes, can have a positive effect on diversity. The need for these noncognitive attributes in clinicians is being reinforced by changes in the US health care system, including shifting patient demographics and a growing emphasis on team-based care and patient satisfaction, and the need for clinicians to help patients interpret complex medical information. The 2016 Physician Assistant Education Association Stakeholder Summit revealed certain behavioral and affective qualities that employers of PAs value and sometimes find lacking in new graduates. Although there are still gaps in the evidence base, some tools and technologies currently exist to more accurately measure noncognitive variables. We propose some possible strategies and tools that PA programs can use to formalize the way they select for noncognitive attributes. Since PA programs have, on average, only 27 months to educate students, programs may need to focus more resources on selecting for these attributes than teaching them.

  16. Use of seismic attributes for sediment classification

    Directory of Open Access Journals (Sweden)

    Fabio Radomille Santana

    2015-04-01

    Full Text Available A study to understand the relationships between seismic attributes extracted from 2D high-resolution seismic data and the seafloor's sediments of the surveyed area. As seismic attributes are features highly influenced by the medium through which the seismic waves are propagated, the authors can assume that it would be possible to characterise the geological nature of the seafloor by using these attributes. Herein, a survey was performed on the continental margin of the South Shetland Islands in Antarctica, where both 2D high-resolution seismic data and sediment gravity cores samples were simultaneously acquired. A computational script was written to extract the seismic attributes from the data, which have been statistically analysed with clustering analyses, such as principal components analysis, dendrograms and k-means classification. The extracted seismic attributes are the amplitude, the instantaneous phase, the instantaneous frequency, the envelope, the time derivative of the envelope, the second derivative of the envelope and the acceleration of phase. Statistical evaluation showed that geological classification of the seafloor's sediments is possible by associating these attributes according to their coherence. The methodologies here developed seem to be appropriate for glacio-marine environment and coarse-to-medium silt sediment found in the study area and may be applied to other regions in the same geological conditions.

  17. Labeled experimental choice design for estimating attribute and availability cross effects with N attributes and specific brand attribute levels

    DEFF Research Database (Denmark)

    Nguyen, Thong Tien

    2011-01-01

    Experimental designs are required in widely used techniques in marketing research, especially for preference-based conjoint analysis and discrete-choice studies. Ideally, marketing researchers prefer orthogonal designs because this technique could give uncorrelated parameter estimates. However, o...... for implementing designs that is efficient enough to estimate model with N brands, each brand have K attributes, and brand attribute has specific levels. The paper also illustrates an example in food consumption study.......Experimental designs are required in widely used techniques in marketing research, especially for preference-based conjoint analysis and discrete-choice studies. Ideally, marketing researchers prefer orthogonal designs because this technique could give uncorrelated parameter estimates. However......, orthogonal design is not available for every situation. Instead, efficient design based on computerized design algorithm is always available. This paper presents the method of efficient design for estimating brand models having attribute and availability cross effects. The paper gives a framework...

  18. Main attributes influencing spent nuclear fuel management

    International Nuclear Information System (INIS)

    Andreescu, N.; Ohai, D.

    1997-01-01

    All activities regarding nuclear fuel, following its discharge from the NPP, constitute the spent fuel management and are grouped in two possible back end variants, namely reprocessing (including HLW vitrification and geological disposal) and direct disposal of spent fuel. In order to select the appropriate variant it is necessary to analyse the aggregate fulfillment of the imposed requirements, particularly of the derived attributes, defined as distinguishing characteristics of the factors used in the decision making process. The main identified attributes are the following: - environmental impact, - availability of suitable sites, - non-proliferation degree, -strategy of energy, - technological complexity and technical maturity, -possible further technical improvements, - size of nuclear programme, - total costs, - public acceptance, - peculiarity of CANDU fuel. The significance of the attributes in the Romanian case, taking into consideration the present situation, as a low scenario and a high scenario corresponding to an important development of the nuclear power, after the year 2010, is presented. According to their importance the ranking of attributes is proposed . Subsequently, the ranking could be used for adequate weighing of attributes in order to realize a multi-criteria analysis and a relevant comparison of back end variants. (authors)

  19. Extreme Weather Events and Climate Change Attribution

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Katherine [National Academy of Sciences, Washington, DC (United States)

    2016-03-31

    A report from the National Academies of Sciences, Engineering, and Medicine concludes it is now possible to estimate the influence of climate change on some types of extreme events. The science of extreme event attribution has advanced rapidly in recent years, giving new insight to the ways that human-caused climate change can influence the magnitude or frequency of some extreme weather events. This report examines the current state of science of extreme weather attribution, and identifies ways to move the science forward to improve attribution capabilities. Confidence is strongest in attributing types of extreme events that are influenced by climate change through a well-understood physical mechanism, such as, the more frequent heat waves that are closely connected to human-caused global temperature increases, the report finds. Confidence is lower for other types of events, such as hurricanes, whose relationship to climate change is more complex and less understood at present. For any extreme event, the results of attribution studies hinge on how questions about the event's causes are posed, and on the data, modeling approaches, and statistical tools chosen for the analysis.

  20. Searchable attribute-based encryption scheme with attribute revocation in cloud storage.

    Science.gov (United States)

    Wang, Shangping; Zhao, Duqiao; Zhang, Yaling

    2017-01-01

    Attribute based encryption (ABE) is a good way to achieve flexible and secure access control to data, and attribute revocation is the extension of the attribute-based encryption, and the keyword search is an indispensable part for cloud storage. The combination of both has an important application in the cloud storage. In this paper, we construct a searchable attribute-based encryption scheme with attribute revocation in cloud storage, the keyword search in our scheme is attribute based with access control, when the search succeeds, the cloud server returns the corresponding cipher text to user and the user can decrypt the cipher text definitely. Besides, our scheme supports multiple keywords search, which makes the scheme more practical. Under the assumption of decisional bilinear Diffie-Hellman exponent (q-BDHE) and decisional Diffie-Hellman (DDH) in the selective security model, we prove that our scheme is secure.

  1. Homogeneity of Prototypical Attributes in Soccer Teams

    Directory of Open Access Journals (Sweden)

    Christian Zepp

    2015-09-01

    Full Text Available Research indicates that the homogeneous perception of prototypical attributes influences several intragroup processes. The aim of the present study was to describe the homogeneous perception of the prototype and to identify specific prototypical subcategories, which are perceived as homogeneous within sport teams. The sample consists of N = 20 soccer teams with a total of N = 278 athletes (age M = 23.5 years, SD = 5.0 years. The results reveal that subcategories describing the cohesiveness of the team and motivational attributes are mentioned homogeneously within sport teams. In addition, gender, identification, team size, and the championship ranking significantly correlate with the homogeneous perception of prototypical attributes. The results are discussed on the basis of theoretical and practical implications.

  2. Controlling attribute effect in linear regression

    KAUST Repository

    Calders, Toon; Karim, Asim A.; Kamiran, Faisal; Ali, Wasif Mohammad; Zhang, Xiangliang

    2013-01-01

    In data mining we often have to learn from biased data, because, for instance, data comes from different batches or there was a gender or racial bias in the collection of social data. In some applications it may be necessary to explicitly control this bias in the models we learn from the data. This paper is the first to study learning linear regression models under constraints that control the biasing effect of a given attribute such as gender or batch number. We show how propensity modeling can be used for factoring out the part of the bias that can be justified by externally provided explanatory attributes. Then we analytically derive linear models that minimize squared error while controlling the bias by imposing constraints on the mean outcome or residuals of the models. Experiments with discrimination-aware crime prediction and batch effect normalization tasks show that the proposed techniques are successful in controlling attribute effects in linear regression models. © 2013 IEEE.

  3. Controlling attribute effect in linear regression

    KAUST Repository

    Calders, Toon

    2013-12-01

    In data mining we often have to learn from biased data, because, for instance, data comes from different batches or there was a gender or racial bias in the collection of social data. In some applications it may be necessary to explicitly control this bias in the models we learn from the data. This paper is the first to study learning linear regression models under constraints that control the biasing effect of a given attribute such as gender or batch number. We show how propensity modeling can be used for factoring out the part of the bias that can be justified by externally provided explanatory attributes. Then we analytically derive linear models that minimize squared error while controlling the bias by imposing constraints on the mean outcome or residuals of the models. Experiments with discrimination-aware crime prediction and batch effect normalization tasks show that the proposed techniques are successful in controlling attribute effects in linear regression models. © 2013 IEEE.

  4. Corporate apologia and the attribution of guilt

    DEFF Research Database (Denmark)

    Bülow-Møller, Anne Marie

    This paper argues that in the difficult disciplines of crisis communication and image restoration, attribution theory has explanatory value. Corporate apologia - the explanations that an organisation offers after an attack - differs with the type of crisis it is designed to diffuse, and if the cr......, and if the crisis concerns legitimacy, the art is to shift the public attribution of guilt or responsibility. The case of Arla vs Hirtshals is used to demonstrate how a concerted effort in impression management succeeded in just such a shift.......This paper argues that in the difficult disciplines of crisis communication and image restoration, attribution theory has explanatory value. Corporate apologia - the explanations that an organisation offers after an attack - differs with the type of crisis it is designed to diffuse...

  5. Attribute And-Or Grammar for Joint Parsing of Human Pose, Parts and Attributes.

    Science.gov (United States)

    Park, Seyoung; Nie, Xiaohan; Zhu, Song-Chun

    2017-07-25

    This paper presents an attribute and-or grammar (A-AOG) model for jointly inferring human body pose and human attributes in a parse graph with attributes augmented to nodes in the hierarchical representation. In contrast to other popular methods in the current literature that train separate classifiers for poses and individual attributes, our method explicitly represents the decomposition and articulation of body parts, and account for the correlations between poses and attributes. The A-AOG model is an amalgamation of three traditional grammar formulations: (i)Phrase structure grammar representing the hierarchical decomposition of the human body from whole to parts; (ii)Dependency grammar modeling the geometric articulation by a kinematic graph of the body pose; and (iii)Attribute grammar accounting for the compatibility relations between different parts in the hierarchy so that their appearances follow a consistent style. The parse graph outputs human detection, pose estimation, and attribute prediction simultaneously, which are intuitive and interpretable. We conduct experiments on two tasks on two datasets, and experimental results demonstrate the advantage of joint modeling in comparison with computing poses and attributes independently. Furthermore, our model obtains better performance over existing methods for both pose estimation and attribute prediction tasks.

  6. Process attributes in bio-ontologies

    Directory of Open Access Journals (Sweden)

    Andrade André Q

    2012-08-01

    Full Text Available Abstract Background Biomedical processes can provide essential information about the (mal- functioning of an organism and are thus frequently represented in biomedical terminologies and ontologies, including the GO Biological Process branch. These processes often need to be described and categorised in terms of their attributes, such as rates or regularities. The adequate representation of such process attributes has been a contentious issue in bio-ontologies recently; and domain ontologies have correspondingly developed ad hoc workarounds that compromise interoperability and logical consistency. Results We present a design pattern for the representation of process attributes that is compatible with upper ontology frameworks such as BFO and BioTop. Our solution rests on two key tenets: firstly, that many of the sorts of process attributes which are biomedically interesting can be characterised by the ways that repeated parts of such processes constitute, in combination, an overall process; secondly, that entities for which a full logical definition can be assigned do not need to be treated as primitive within a formal ontology framework. We apply this approach to the challenge of modelling and automatically classifying examples of normal and abnormal rates and patterns of heart beating processes, and discuss the expressivity required in the underlying ontology representation language. We provide full definitions for process attributes at increasing levels of domain complexity. Conclusions We show that a logical definition of process attributes is feasible, though limited by the expressivity of DL languages so that the creation of primitives is still necessary. This finding may endorse current formal upper-ontology frameworks as a way of ensuring consistency, interoperability and clarity.

  7. Detection and Attribution of Anthropogenic Climate Change Impacts

    Science.gov (United States)

    Rosenzweig, Cynthia; Neofotis, Peter

    2013-01-01

    Human-influenced climate change is an observed phenomenon affecting physical and biological systems across the globe. The majority of observed impacts are related to temperature changes and are located in the northern high- and midlatitudes. However, new evidence is emerging that demonstrates that impacts are related to precipitation changes as well as temperature, and that climate change is impacting systems and sectors beyond the Northern Hemisphere. In this paper, we highlight some of this new evidence-focusing on regions and sectors that the Intergovernmental Panel on Climate Change Fourth Assessment Report (IPCC AR4) noted as under-represented-in the context of observed climate change impacts, direct and indirect drivers of change (including carbon dioxide itself), and methods of detection. We also present methods and studies attributing observed impacts to anthropogenic forcing. We argue that the expansion of methods of detection (in terms of a broader array of climate variables and data sources, inclusion of the major modes of climate variability, and incorporation of other drivers of change) is key to discerning the climate sensitivities of sectors and systems in regions where the impacts of climate change currently remain elusive. Attributing such changes to human forcing of the climate system, where possible, is important for development of effective mitigation and adaptation. Current challenges in documenting adaptation and the role of indigenous knowledge in detection and attribution are described.

  8. Attributes of Successful Actions to Restore Lakes and ...

    Science.gov (United States)

    As more success is achieved restoring lakes and estuaries from nutrient pollution, there is increased opportunity to evaluate the scientific, social, and policy factors associated with achieving restoration goals. We examined case studies where deliberate actions to reduce nutrient pollution resulted in ecological recovery. Cases were identified from scientific literature meeting the following: (1) scientific evidence of nutrient pollution; (2) restoration actions taken to mitigate nutrient pollution; and (3) documented ecological improvement. We identified 9 estuaries and 7 lakes spanning countries, climatic regions, physical types, depths, and watershed areas. Among these 8 achieved improvements short of stated restoration goals, 8 were successful initially, but then condition declined and 3 achieved their goals fully. We examined each case to identify both common attributes of nutrient management, grouped into ‘themes’, and the variations on those attributes, which were coded into categorical variables and examined using multiple correspondence analysis (MCA). MCA results suggested that the attributes most associated with achieving restoration goals include: (1) leadership by a dedicated watershed management agency; (2) governance through a bottom-up collaborative process; (3) a strategy that set numeric targets based on a specific ecological goal; and (4) actions to reduce nutrient loads from all sources. While our study did not provide a compreh

  9. Security Implications of Physical Design Attributes in the Emergency Department.

    Science.gov (United States)

    Pati, Debajyoti; Pati, Sipra; Harvey, Thomas E

    2016-07-01

    Security, a subset of safety, is equally important in the efficient delivery of patient care. The emergency department (ED) is susceptible to violence creating concerns for the safety and security of patients, staff, and visitors and for the safe and efficient delivery of care. Although there is an implicit and growing recognition of the role of the physical environment, interventions typically have been at the microlevel. The objective of this study was to identify physical design attributes that potentially influence safety and efficiency of ED operations. An exploratory, qualitative research design was adopted to examine the efficiency and safety correlates of ED physical design attributes. The study comprised a multimeasure approach involving multidisciplinary gaming, semistructured interviews, and touring interviews of frontline staff in four EDs at three hospital systems across three states. Five macro physical design attributes (issues that need to be addressed at the design stage and expensive to rectify once built) emerged from the data as factors substantially associated with security issues. They are design issues pertaining to (a) the entry zone, (b) traffic management, (c) patient room clustering, (d) centralization versus decentralization, and (e) provisions for special populations. Data from this study suggest that ED security concerns are generally associated with three sources: (a) gang-related violence, (b) dissatisfied patients, and (c) behavioral health patients. Study data show that physical design has an important role in addressing the above-mentioned concerns. Implications for ED design are outlined in the article. © The Author(s) 2016.

  10. Attribute correlates of hospital outpatient satisfaction.

    Science.gov (United States)

    Krueckeberg, H F; Hubbert, A

    1995-01-01

    Customer satisfaction (patient satisfaction) with hospital outpatient or ambulatory services is an important factor in influencing patient patronage and loyalty. Based on an empirical study, this article examines the attributes of the ambulatory care experience which were significantly associated with the level of satisfaction resulting from the most recent hospital ambulatory visit. This study focuses on identifying attributes of ambulatory services. This article brings to the health care marketing literature information on ambulatory satisfaction comparable to that which has been contributed to the literature regarding satisfaction with physician and hospital experiences.

  11. Histo-morphological findings and preliminary clinical findings after pre-operative short-term irradiation of squamous cell carcinomas of the floor of the mouth using telecobalt sources

    International Nuclear Information System (INIS)

    Dieckmann, J.; Morgenroth, K.; Hering, K.; Will, C.

    1981-01-01

    In a clinical investigation, the preoperative short-term telecobalt irradiation of patients with carcinoma of the floor of the mouth was tested. On 50 patients, the preoperative irradiation was applied after identifying the tumour by PE and fast cesion examination. Within 3 days, a focal dose of 15 to 20 Gy was applied. On the 4th day, the radical operation took place. 2-3 weeks after the operation, the saturation irradiation was carried out. For the purpose of testing, 100 patients under our usual combined treatment with radical operation plus postoperative curative telecobalt irradiation were refined to. The tissue sample before irradiation was histologically compared to the preoperatively irradiated tumour. The examinations revealed definitively a letal damage of the tumour cells. Up to the moment, the clinical results could not be received statistically because the investigation had just been finished when the draft of the speech was in preparation. But we can state, as a preliminary result, that there is a trend recognizable in which the mortality in the patients group seems to be appr. 8% lower. It is noteworthy, however, that the relapse and metastase behaviour in the group of preirradiated tumours seems to be significantly better than in the group irradiated only surgically and postoperatively: it is seen that the tumour-caused mortality in the first group is 18% less than in the latter. (orig.) [de

  12. KALIMER preliminary conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kim, Y. J.; Kim, Y. G. and others

    2000-08-01

    This report, which summarizes the result of preliminary conceptual design activities during Phase 1, follows the format of safety analysis report. The purpose of publishing this report is to gather all of the design information developed so far in a systematic way so that KALIMER designers have a common source of the consistent design information necessary for their future design activities. This report will be revised and updated as design changes occur and more detailed design specification is developed during Phase 2. Chapter 1 describes the KALIMER Project. Chapter 2 includes the top level design requirements of KALIMER and general plant description. Chapter 3 summarizes the design of structures, components, equipment and systems. Specific systems and safety analysis results are described in the remaining chapters. Appendix on the HCDA evaluation is attached at the end of this report.

  13. KALIMER preliminary conceptual design report

    International Nuclear Information System (INIS)

    Hahn, Do Hee; Kim, Y. J.; Kim, Y. G. and others

    2000-08-01

    This report, which summarizes the result of preliminary conceptual design activities during Phase 1, follows the format of safety analysis report. The purpose of publishing this report is to gather all of the design information developed so far in a systematic way so that KALIMER designers have a common source of the consistent design information necessary for their future design activities. This report will be revised and updated as design changes occur and more detailed design specification is developed during Phase 2. Chapter 1 describes the KALIMER Project. Chapter 2 includes the top level design requirements of KALIMER and general plant description. Chapter 3 summarizes the design of structures, components, equipment and systems. Specific systems and safety analysis results are described in the remaining chapters. Appendix on the HCDA evaluation is attached at the end of this report

  14. Preliminary study of mercury target structure

    Energy Technology Data Exchange (ETDEWEB)

    Kaminaga, Masanori; Haga, Katsuhiro; Hino, Ryutaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kumasaka, Katsuyuki; Uchida, Shoji; Nakagawa, Toshi; Mori, Seiji; Nishikawa, Akira

    1997-11-01

    Development of a proton accelerator based neutron source (1.5 GeV, 5.3 mA (for neutron source 3.3 mA), thermal power 8 MW) is currently conducted by the Special Task Force for Neutron Science Initiative, JAERI. Preliminary design studies and related R and D of a solid metal target for the first stage (1.5 GeV, 1 mA) and a liquid metal target for both the first and second stages (1.5 GeV, 3.3 mA) are conducted by the Target Group to develop both solid and liquid metal target systems. A few kinds of target structures have been investigated in FY 1996 and the preliminary results for the target structures are described in this paper. Investigation results of alternative materials for the target container are also described in this paper. (author)

  15. : Light Steering Projection Systems and Attributes for HDR Displays

    KAUST Repository

    Damberg, Gerwin

    2017-06-02

    New light steering projectors in cinema form images by moving light away from dark regions into bright areas of an image. In these systems, the peak luminance of small features can far exceed full screen white luminance. In traditional projectors where light is filtered or blocked in order to give shades of gray (or colors), the peak luminance is fixed. The luminance of chromatic features benefit in the same way as white features, and chromatic image details can be reproduced at high brightness leading to a much wider overall color gamut coverage than previously possible. Projectors of this capability are desired by the creative community to aid in and enhance storytelling. Furthermore, reduced light source power requirements of light steering projectors provide additional economic and environmental benefits. While the dependency of peak luminance level on (bright) image feature size is new in the digital cinema space, display technologies with identical characteristics such as OLED, LED LCD and Plasma TVs are well established in the home. Similarly, direct view LED walls are popular in events, advertising and architectural markets. To enable consistent color reproduction across devices in today’s content production pipelines, models that describe modern projectors and display attributes need to evolve together with HDR standards and available metadata. This paper is a first step towards rethinking legacy display descriptors such as contrast, peak luminance and color primaries in light of new display technology. We first summarize recent progress in the field of light steering projectors in cinema and then, based on new projector and existing display characteristics propose the inclusion of two simple display attributes: Maximum Average Luminance and Peak (Color) Primary Luminance. We show that the proposed attributes allow a better prediction of content reproducibility on HDR displays. To validate this assertion, we test professional content on a commercial HDR

  16. Growth and reproductive attributes of radionuclide phytoremediators ...

    African Journals Online (AJOL)

    The study reveals that growth attributes including relative growth rate, net assimilation rate, leaf are index and specific leaf area, dry matter allocated to stem and leaves and number of reproductive organs decreased with the increase of radionuclide content of the plant, while the dry matter allocated to root and reproductive ...

  17. Development of the Attributed Dignity Scale.

    Science.gov (United States)

    Jacelon, Cynthia S; Dixon, Jane; Knafl, Kathleen A

    2009-07-01

    A sequential, multi-method approach to instrument development beginning with concept analysis, followed by (a) item generation from qualitative data, (b) review of items by expert and lay person panels, (c) cognitive appraisal interviews, (d) pilot testing, and (e) evaluating construct validity was used to develop a measure of attributed dignity in older adults. The resulting positively scored, 23-item scale has three dimensions: Self-Value, Behavioral Respect-Self, and Behavioral Respect-Others. Item-total correlations in the pilot study ranged from 0.39 to 0.85. Correlations between the Attributed Dignity Scale (ADS) and both Rosenberg's Self-Esteem Scale (0.17) and Crowne and Marlowe's Social Desirability Scale (0.36) were modest and in the expected direction, indicating attributed dignity is a related but independent concept. Next steps include testing the ADS with a larger sample to complete factor analysis, test-retest stability, and further study of the relationships between attributed dignity and other concepts.

  18. On defining semantics of extended attribute grammars

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    1980-01-01

    Knuth has introduced attribute grammars (AGs) as a tool to define the semanitcs of context-free languages. The use of AGs in connection with programming language definitions has mostly been to define the context-sensitive syntax of the language and to define a translation in code for a hypothetic...

  19. Parent-Child Agreement on Attributional Beliefs.

    Science.gov (United States)

    Cashmore, Judith A.; Goodnow, Jacqueline J.

    1986-01-01

    Explores extent to which parents and their adolescent children agree with respect to their attributional beliefs. First-born Australian children of Anglo and Italian backgrounds and their parents ranked talent, effort, and teaching according to relative importance in the development of six skill areas. Variations in patterns of attributions…

  20. Consumer preferences for pork supply chain attributes

    NARCIS (Netherlands)

    Meuwissen, M.P.M.; Lans, van der I.A.; Huirne, R.B.M.

    2007-01-01

    Based on an extensive customized conjoint analysis with 24 attributes of pork production, covering issues from feed to fork, we identified six consumer segments: ecologists (17%), tradition-minded consumers (17%), animal friends (16%), health-concerned consumers (18%), economists (12%) and

  1. 1 Evaluating Biophysical Attributes of Environmentally Degraded ...

    African Journals Online (AJOL)

    `123456789jkl''''#

    Ethiopian Journal of Environmental Studies and Management Vol.4 No. 1 2011. 1 Department of .... land cover types and other physical attributes. (soils and landform ..... Natural water bodies (Rivers). Figure 4: .... permanent or ephemeral rivers. .... evaluating land use/land cover change using participatory ... First Edition.

  2. Predictive user modeling with actionable attributes

    NARCIS (Netherlands)

    Zliobaite, I.; Pechenizkiy, M.

    2013-01-01

    Different machine learning techniques have been proposed and used for modeling individual and group user needs, interests and preferences. In the traditional predictive modeling instances are described by observable variables, called attributes. The goal is to learn a model for predicting the target

  3. Attributional and consequential LCA of milk production

    NARCIS (Netherlands)

    Thomassen, M.A.; Dalgaard, P.; Heijungs, R.; Boer, de I.J.M.

    2008-01-01

    Background, aim and scope Different ways of performing a life cycle assessment (LCA) are used to assess the environmental burden of milk production. A strong connection exists between the choice between attributional LCA (ALCA) and consequential LCA (CLCA) and the choice of how to handle

  4. Attributional and consequential LCA of milk production

    NARCIS (Netherlands)

    Thomassen, Marlies A.; Dalgaard, Randi; Heijungs, Reinout; De Boer, Imke

    Background, aim and scope: Different ways of performing a life cycle assessment (LCA) are used to assess the environmental burden of milk production. A strong connection exists between the choice between attributional LCA (ALCA) and consequential LCA (CLCA) and the choice of how to handle

  5. Beyond OCR: Handwritten manuscript attribute understanding

    NARCIS (Netherlands)

    He, Sheng

    2017-01-01

    Knowing the author, date and location of handwritten historical documents is very important for historians to completely understand and reveal the valuable information they contain. In this thesis, three attributes, such as writer, date and geographical location, are studied by analyzing the

  6. The Personal Attributes Questionnaire: A Conceptual Analysis.

    Science.gov (United States)

    Ozer, Daniel

    The rich complexity of the concepts of masculinity and femininity has been reflected in personality measures in at least two different ways: by employing a variety of subscales with comparatively homogeneous items or by using a single scale with comparatively heterogeneous items. The Personal Attributes Questionnaire (PAQ) was the subject of an…

  7. FAT-miner: mining frequent attribute trees

    NARCIS (Netherlands)

    Knijf, de J.; Cho, Y.; Wainwright, R.L.; Haddad, H.; Shin, S.Y.; Koo, Y.W.

    2007-01-01

    Data that can conceptually be viewed as tree structures abounds in domains such as bio-informatics, web logs, XML databases and multi-relational databases. Besides structural information such as nodes and edges, tree structured data also often contains attributes, that represent properties of nodes.

  8. Memory for Recently Accessed Visual Attributes

    Science.gov (United States)

    Jiang, Yuhong V.; Shupe, Joshua M.; Swallow, Khena M.; Tan, Deborah H.

    2016-01-01

    Recent reports have suggested that the attended features of an item may be rapidly forgotten once they are no longer relevant for an ongoing task (attribute amnesia). This finding relies on a surprise memory procedure that places high demands on declarative memory. We used intertrial priming to examine whether the representation of an item's…

  9. Distress attributed to negative symptoms in schizophrenia

    NARCIS (Netherlands)

    Selten, JP; Wiersma, D; van den Bosch, RJ

    2000-01-01

    The purpose of the study was to examine (1) to which negative symptoms schizophrenia patients attribute distress and (2) whether clinical variables can predict the levels of reported distress. With the help of a research assistant, 86 hospitalized patients completed a self-rating scale for negative

  10. Attribution of Negative Intention in Williams Syndrome

    Science.gov (United States)

    Godbee, Kali; Porter, Melanie A.

    2013-01-01

    People with Williams syndrome (WS) are said to have sociable and extremely trusting personalities, approaching strangers without hesitation. This study investigated whether people with WS are less likely than controls to attribute negative intent to others when interpreting a series of ambiguous pictures. This may, at least partially, explain…

  11. Discriminative power of visual attributes in dermatology

    NARCIS (Netherlands)

    Giotis, Ioannis; Visser, Margaretha; Jonkman, Marcel; Petkov, Nicolai

    Background/purpose: Visual characteristics such as color and shape of skin lesions play an important role in the diagnostic process. In this contribution, we quantify the discriminative power of such attributes using an information theoretical approach. Methods: We estimate the probability of

  12. Flexible goal attribution in early mindreading.

    Science.gov (United States)

    Michael, John; Christensen, Wayne

    2016-03-01

    The 2-systems theory developed by Apperly and Butterfill (2009; Butterfill & Apperly, 2013) is an influential approach to explaining the success of infants and young children on implicit false-belief tasks. There is extensive empirical and theoretical work examining many aspects of this theory, but little attention has been paid to the way in which it characterizes goal attribution. We argue here that this aspect of the theory is inadequate. Butterfill and Apperly's characterization of goal attribution is designed to show how goals could be ascribed by infants without representing them as related to other psychological states, and the minimal mindreading system is supposed to operate without employing flexible semantic-executive cognitive processes. But research on infant goal attribution reveals that infants exhibit a high degree of situational awareness that is strongly suggestive of flexible semantic-executive cognitive processing, and infants appear moreover to be sensitive to interrelations between goals, preferences, and beliefs. Further, close attention to the structure of implicit mindreading tasks--for which the theory was specifically designed--indicates that flexible goal attribution is required to succeed. We conclude by suggesting 2 approaches to resolving these problems. (c) 2016 APA, all rights reserved).

  13. Credit in Acceptance Sampling on Attributes

    NARCIS (Netherlands)

    Klaassen, Chris A.J.

    2000-01-01

    Credit is introduced in acceptance sampling on attributes and a Credit Based Acceptance sampling system is developed that is very easy to apply in practice.The credit of a producer is defined as the total number of items accepted since the last rejection.In our sampling system the sample size for a

  14. Defining Hardwood Veneer Log Quality Attributes

    Science.gov (United States)

    Jan Wiedenbeck; Michael Wiemann; Delton Alderman; John Baumgras; William Luppold

    2004-01-01

    This publication provides a broad spectrum of information on the hardwood veneer industry in North America. Veneer manufacturers and their customers impose guidelines in specifying wood quality attributes that are very discriminating but poorly defined (e.g., exceptional color, texture, and/or figure characteristics). To better understand and begin to define the most...

  15. Personal attributes influencing school burnout among graduating ...

    African Journals Online (AJOL)

    Questionnaires administered on participants contained scales that measured school burnout, academic self-efficacy, perception of teacher support, sex and age. The study predicted that personal attributes and demographics will significantly influence school burnout. The hypothesis was confirmed as predicted as result ...

  16. A keyword searchable attribute-based encryption scheme with attribute update for cloud storage.

    Science.gov (United States)

    Wang, Shangping; Ye, Jian; Zhang, Yaling

    2018-01-01

    Ciphertext-policy attribute-based encryption (CP-ABE) scheme is a new type of data encryption primitive, which is very suitable for data cloud storage for its fine-grained access control. Keyword-based searchable encryption scheme enables users to quickly find interesting data stored in the cloud server without revealing any information of the searched keywords. In this work, we provide a keyword searchable attribute-based encryption scheme with attribute update for cloud storage, which is a combination of attribute-based encryption scheme and keyword searchable encryption scheme. The new scheme supports the user's attribute update, especially in our new scheme when a user's attribute need to be updated, only the user's secret key related with the attribute need to be updated, while other user's secret key and the ciphertexts related with this attribute need not to be updated with the help of the cloud server. In addition, we outsource the operation with high computation cost to cloud server to reduce the user's computational burden. Moreover, our scheme is proven to be semantic security against chosen ciphertext-policy and chosen plaintext attack in the general bilinear group model. And our scheme is also proven to be semantic security against chosen keyword attack under bilinear Diffie-Hellman (BDH) assumption.

  17. Gender Attributions of Science and Academic Attributes: AN Examination of Undergraduate Science, Mathematics, and Technology Majors

    Science.gov (United States)

    Hughes, W. Jay

    Questionnaire data (n = 297) examined the relationship between gender attributions of science and academic attributes for undergraduate science, mathematics, and technology majors from the perspective of gender schema theory. Female and male respondents perceived that (a) the role of scientist was sex typed as masculine, (b) their majors were more valuable for members of their gender than for those of the opposite gender, (c) their majors were more valuable for themselves than for members of their gender in general. Androgynous attributions of scientists and the value of one's major for women predicted value for oneself, major confidence, and career confidence, and masculine attributions of scientists predicted class participation for female respondents. Feminine attributions of scientists predicted graduate school intent; value for women predicted major confidence and subjective achievement, and value for men predicted value for oneself, course confidence, and career confidence for male respondents.

  18. Concurrent computation of attribute filters on shared memory parallel machines

    NARCIS (Netherlands)

    Wilkinson, Michael H.F.; Gao, Hui; Hesselink, Wim H.; Jonker, Jan-Eppo; Meijster, Arnold

    2008-01-01

    Morphological attribute filters have not previously been parallelized mainly because they are both global and nonseparable. We propose a parallel algorithm that achieves efficient parallelism for a large class of attribute filters, including attribute openings, closings, thinnings, and thickenings,

  19. A multi-country approach for attributing human salmonellosis to animal reservoirs

    DEFF Research Database (Denmark)

    de Knegt, Leonardo

    in order to extrapolate results to countries with less data availability, as a first step to perform source attribution of Salmonella in a more global perspective. Cases of foodborne salmonellosis in humans were attributed to travel, outbreaks and four animal reservoirs, namely pigs, broilers, turkeys...... here on referred to as “travel information”), human cases originating from outbreaks with and without a confirmed source and amounts of the meat or eggs of each animal reservoir originating from each country and available for consumption in each country. Thus, special data management, analysis...... with the lack of good-quality data for such studies. The project has also achieved results that may lay the groundwork for future attempts to develop Salmonella source attribution estimates in a more global perspective....

  20. Customers' attributional judgments towards complaint handling in airline service: a confirmatory study based on attribution theory.

    Science.gov (United States)

    Chiou, Wen-Bin

    2007-06-01

    Besides flight safety, complaint handling plays a crucial role in airline service. Based upon Kelley's attribution theory, in the present study customers' attributions were examined under different conditions of complaint handling by the airlines. There were 531 passengers (216 women; ages 21 to 63 years, M = 41.5, SD = 11.1) with experiences of customer complaints who were recruited while awaiting boarding. Participants received one hypothetical scenario of three attributional conditions about complaint handling and then reported their attributional judgments. The findings indicated that the passengers were most likely to attribute the company's complaint handling to unconditional compliance when the airline company reacted to customer complaints under low distinctiveness, high consistency, and when consensus among the airlines was low. On the other hand, most passengers attributed the company's complaint handling to conditional compliance under the conditions in which distinctiveness, consistency, and consensus were all high. The results provide further insights into how different policies of complaint management affect customers' attributions. Future directions and managerial implications are also discussed.

  1. ANALISIS PERSEPSI AUDITOR MENGENAI FAKTOR PENENTU AUDIT FEE BERDASARKAN CLIENT ATTRIBUTES, AUDITOR ATTRIBUTES, DAN ENGAGEMENT ATRTRIBUTES

    Directory of Open Access Journals (Sweden)

    Aman Faturachman

    2013-04-01

    Full Text Available This research purposes to know how perception auditors about determining factors of audit fee based on Client Attributes, Auditor Attributes, and Engagement Attributes at The Public Accountant Firm residing in Bandung. In this research, the indicator that is used to characterize the Client Attributes are size, complexity, inherent risk, profitability, leverage and liquidity, and industry. While the indicator to characterize the Auditor Attributes are auditor’s specialization, audit tenure, and location. And the indicators to characterize the Engagement Attributes are audit problems, audit report lag, busy season, and number of reports. The Method that is used in this research is a descriptive method. The population in this research is a public accountant in Bandung. Based on sampling techniques that saturated and qualified then it take about 11 offices of public accountant. SmartPLS ver 2.0 M3 are used as a Statistical analysis. The result of this research with count the loading factor and bootstrapping method are, the first one that the perception of the auditor based on client attributes of audit fee determinants from which is very important to not important is size, complexity, profitability, inherent risk,  industry, and leverage & liquidty, the second states that perception based on auditor attributes audit fee determinants from which is very important to not important is audit tenure, location, and specialization. And the third states that the perception of auditor engagement attributes based determinants of audit fee which is very important to not important audit report lag, busy season, audit problems and number of reports.

  2. Constraint-based Attribute and Interval Planning

    Science.gov (United States)

    Jonsson, Ari; Frank, Jeremy

    2013-01-01

    In this paper we describe Constraint-based Attribute and Interval Planning (CAIP), a paradigm for representing and reasoning about plans. The paradigm enables the description of planning domains with time, resources, concurrent activities, mutual exclusions among sets of activities, disjunctive preconditions and conditional effects. We provide a theoretical foundation for the paradigm, based on temporal intervals and attributes. We then show how the plans are naturally expressed by networks of constraints, and show that the process of planning maps directly to dynamic constraint reasoning. In addition, we de ne compatibilities, a compact mechanism for describing planning domains. We describe how this framework can incorporate the use of constraint reasoning technology to improve planning. Finally, we describe EUROPA, an implementation of the CAIP framework.

  3. Transfer and use of generation attributes

    International Nuclear Information System (INIS)

    Jansen, J.C.

    2005-06-01

    Key issues regarding generation attribute accounting are being considered in the U.S., following similar discussions related to their use in Europe. Strict substantiation, environmental additionality and consistency criteria should be enshrined in nascent legislation being developed regarding claims over (electricity) generation attributes, and suitable standardization of disclosure labels should be mandated for electricity offerings to end users. In this way, the issue of multiple counting can be addressed effectively, consumer protection in the electricity market reliably ensured, and confidence in the integrity of green power products enhanced. For the time being, non-hydro renewable electricity cannot gain substantial market share without specific policy stimulation. Yet, both in Europe and in the U.S., credible facilitation of the consumer's choice in the electricity market is set to unleash considerable addition

  4. Attributional and consequential LCA of milk production

    DEFF Research Database (Denmark)

    Thomassen, Marlies A; Dalgaard, Randi; Heijungs, Reinout

    2008-01-01

    Background, aim and scope  Different ways of performing a life cycle assessment (LCA) are used to assess the environmental burden of milk production. A strong connection exists between the choice between attributional LCA (ALCA) and consequential LCA (CLCA) and the choice of how to handle co......-products. Insight is needed in the effect of choice on results of environmental analyses of agricultural products, such as milk. The main goal of this study was to demonstrate and compare ALCA and CLCA of an average conventional milk production system in The Netherlands. Materials and methods  ALCA describes...... the pollution and resource flows within a chosen system attributed to the delivery of a specified amount of the functional unit. CLCA estimates how pollution and resource flows within a system change in response to a change in output of the functional unit. For an average Dutch conventional milk production...

  5. Quality-Attribute-Based Economic Valuation of Architectural Patterns

    National Research Council Canada - National Science Library

    Ozkaya, Ipek; Kazman, Rick; Klein, Mark

    2007-01-01

    .... Architectural patterns can be used to achieve quality attribute requirements. Consequently, architectural patterns generate value based on the present and future utility of the quality attributes they achieve...

  6. Group and Topic Discovery from Relations and Their Attributes

    National Research Council Canada - National Science Library

    Wang, Xuerui; Mohanty, Natasha; McCallum, Andrew

    2006-01-01

    The authors present a probabilistic generative model of entity relationships and their attributes that simultaneously discovers groups among the entities and topics among the corresponding textual attributes...

  7. Attribution Theory and Judgment under Uncertainty

    Science.gov (United States)

    1975-06-13

    that every- cuy learning experiences are typically not structured to develop cognitive control. Much of the problem appears to be related to...people do and should explain past events may be found in the ruminations of historians over the state and nature of their craft (e.g.. Beard, 1935...8217 P- N- Psychology of Reasoning: Structure and Content . London: Bacsford, 19727 gcruccure - Attribution Theory 51 Wyer, R. S. CoRnitive

  8. A calculus for attribute-based communication

    DEFF Research Database (Denmark)

    Alrahman, Yehia Abd; De Nicola, Rocco; Loreti, Michele

    2015-01-01

    The notion of attribute-based communication seems promising to model and analyse systems with huge numbers of interacting components that dynamically adjust and combine their behaviour to achieve specific goals. A basic process calculus, named AbC, is introduced that has as primitive construct...... of how well-established process calculi could be encoded into AbC is given by considering the translation into AbC of a proto-typical π-calculus process....

  9. Valuing Attributes of Fluid Milk in Laos

    OpenAIRE

    Jae Won Lee; Taeyoon Kim; Viengsakoun Napasirth

    2017-01-01

    This study estimates the random utility function of fluid milk using 1,165 survey responses in Laos. It finds that both products’ attributes and individual characteristics affect consumers’ preference for the milk and the hypothetical brand of Laos-Korea has a potential compared to four real dairy products. Results also show that calories have a positive relationship with consumer’s preference while the price and fat content have a negative one. The decision for choosing each brand is signifi...

  10. Consumer Preferences for Hearing Aid Attributes

    Science.gov (United States)

    Lataille, Angela T.; Buttorff, Christine; White, Sharon; Niparko, John K.

    2012-01-01

    Low utilization of hearing aids has drawn increased attention to the study of consumer preferences using both simple ratings (e.g., Likert scale) and conjoint analyses, but these two approaches often produce inconsistent results. The study aims to directly compare Likert scales and conjoint analysis in identifying important attributes associated with hearing aids among those with hearing loss. Seven attributes of hearing aids were identified through qualitative research: performance in quiet settings, comfort, feedback, frequency of battery replacement, purchase price, water and sweat resistance, and performance in noisy settings. The preferences of 75 outpatients with hearing loss were measured with both a 5-point Likert scale and with 8 paired-comparison conjoint tasks (the latter being analyzed using OLS [ordinary least squares] and logistic regression). Results were compared by examining implied willingness-to-pay and Pearson’s Rho. A total of 56 respondents (75%) provided complete responses. Two thirds of respondents were male, most had sensorineural hearing loss, and most were older than 50; 44% of respondents had never used a hearing aid. Both methods identified improved performance in noisy settings as the most valued attribute. Respondents were twice as likely to buy a hearing aid with better functionality in noisy environments (p < .001), and willingness to pay for this attribute ranged from US$2674 on the Likert to US$9000 in the conjoint analysis. The authors find a high level of concordance between the methods—a result that is in stark contrast with previous research. The authors conclude that their result stems from constraining the levels on the Likert scale. PMID:22514094

  11. Attribution of polar warming to human influence

    OpenAIRE

    Gillett, NP; Stone, DA; Stott, PA; Nozawa, T; Karpechko, AY; Hegerl, GC; Wehner, MF; Jones, PD

    2008-01-01

    The polar regions have long been expected to warm strongly as a result of anthropogenic climate change, because of the positive feedbacks associated with melting ice and snow. Several studies have noted a rise in Arctic temperatures over recent decades, but have not formally attributed the changes to human influence, owing to sparse observations and large natural variability. Both warming and cooling trends have been observed in Antarctica, which the Intergovernmental Panel on Climate Change ...

  12. Toward Deriving Software Architectures from Quality Attributes

    Science.gov (United States)

    1994-08-01

    administration of Its orograms on the basis of religion creec ancestry. belief, age veteran status sexuai orientation or rn violation of federal state or Ioca...environments rely on the notion of a "tool bus" or an explicit shared repository [ Wasser - man 89] to allow easy integration of tools. 4.7 Unit...attributed parse tree and symbol table that the compiler cre- ates and annotates during its various phases. This results in a very different software

  13. Quality Model Based on Cots Quality Attributes

    OpenAIRE

    Jawad Alkhateeb; Khaled Musa

    2013-01-01

    The quality of software is essential to corporations in making their commercial software. Good or poorquality to software plays an important role to some systems such as embedded systems, real-time systems,and control systems that play an important aspect in human life. Software products or commercial off theshelf software are usually programmed based on a software quality model. In the software engineeringfield, each quality model contains a set of attributes or characteristics that drives i...

  14. Attribution models and the Cooperative Game Theory

    OpenAIRE

    Cano Berlanga, Sebastian; Vilella, Cori

    2017-01-01

    The current paper studies the attribution model used by Google Analytics. Precisely, we use the Cooperative Game Theory to propose a fair distribution of the revenues among the considered channels, in order to facilitate the cooperation and to guarantee stability. We define a transferable utility convex cooperative game from the observed frequencies and we use the Shapley value to allocate the revenues among the di erent channels. Furthermore, we evaluate the impact of an advertising...

  15. Experimental functional realization of attribute grammar system

    Directory of Open Access Journals (Sweden)

    I. Attali

    2002-07-01

    Full Text Available In this paper we present an experimental functional realization of attribute grammar(AG system for personal computers. For AG system functioning only Turbo Prolog compiler is required. The system functioning is based on a specially elaborated metalanguage for AG description, universal syntactic and semantic constructors. The AG system provides automatic generation of target compiler (syntax--oriented software using Turbo Prolog as object language.

  16. Software attribute visualization for high integrity software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.

    1998-03-01

    This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

  17. Calibration of Seismic Attributes for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Pennington, Wayne D.; Acevedo, Horacio; Green, Aaron; Len, Shawn; Minavea, Anastasia; Wood, James; Xie, Deyi

    2002-01-29

    This project has completed the initially scheduled third year of the contract, and is beginning a fourth year, designed to expand upon the tech transfer aspects of the project. From the Stratton data set, demonstrated that an apparent correlation between attributes derived along `phantom' horizons are artifacts of isopach changes; only if the interpreter understands that the interpretation is based on this correlation with bed thickening or thinning, can reliable interpretations of channel horizons and facies be made. From the Boonsville data set , developed techniques to use conventional seismic attributes, including seismic facies generated under various neural network procedures, to subdivide regional facies determined from logs into productive and non-productive subfacies, and developed a method involving cross-correlation of seismic waveforms to provide a reliable map of the various facies present in the area. The Teal South data set provided a surprising set of data, leading us to develop a pressure-dependent velocity relationship and to conclude that nearby reservoirs are undergoing a pressure drop in response to the production of the main reservoir, implying that oil is being lost through their spill points, never to be produced. The Wamsutter data set led to the use of unconventional attributes including lateral incoherence and horizon-dependent impedance variations to indicate regions of former sand bars and current high pressure, respectively, and to evaluation of various upscaling routines.

  18. Nuclear and Radiological Forensics and Attribution Overview

    International Nuclear Information System (INIS)

    Smith, D K; Niemeyer, S

    2005-01-01

    The goal of the U.S. Department of Homeland Security (DHS) Nuclear and Radiological Forensics and Attribution Program is to develop the technical capability for the nation to rapidly, accurately, and credibly attribute the origins and pathways of interdicted or collected materials, intact nuclear devices, and radiological dispersal devices. A robust attribution capability contributes to threat assessment, prevention, and deterrence of nuclear terrorism; it also supports the Federal Bureau of Investigation (FBI) in its investigative mission to prevent and respond to nuclear terrorism. Development of the capability involves two major elements: (1) the ability to collect evidence and make forensic measurements, and (2) the ability to interpret the forensic data. The Program leverages the existing capability throughout the U.S. Department of Energy (DOE) national laboratory complex in a way that meets the requirements of the FBI and other government users. At the same time the capability is being developed, the Program also conducts investigations for a variety of sponsors using the current capability. The combination of operations and R and D in one program helps to ensure a strong linkage between the needs of the user community and the scientific development

  19. STUDENTS’ ATTRIBUTIONS ON THEIR ENGLISH SPEAKING ENHANCEMENT

    Directory of Open Access Journals (Sweden)

    Yustinus Mali

    2015-01-01

    Full Text Available Abstract: Attribution refers to explanations and reasons that people provide for progress, achievement, and even failure towards something they have experienced, particularly in their language learning. This study aimed to investigate the attributions that students had for their English-speaking enhancement. The participants of the study were eighteen students at Sekolah Tinggi Pariwisata Ambarukmo Yogyakarta (STIPRAM. Open-ended questionnaire and interview were used as the instruments to collect the data. On the questionnaire, the participants were specifically asked to provide written responses to three statements, while in the interview process, the researcher involved three participants to provide further clarification toward their written responses on the questionnaire. The data analysis revealed that a clear purpose of doing particular English speaking activities, strategy, and the positive motivation/encouragement from friends as well as from the teacher became the major students’ attributions on their English-speaking enhancement. Besides, this study would seem to indicate that a teacher took an essential role in the enhancement of the students’ English speaking skill. Eventually, this study proposed some pedagogical implications for the development of teaching and learning in English speaking classes specifically in Indonesian context.

  20. [Disability attributable to excess weight in Spain].

    Science.gov (United States)

    Martín-Ramiro, José Javier; Alvarez-Martín, Elena; Gil-Prieto, Ruth

    2014-08-19

    To estimate the disability attributable to higher than optimal body mass index in the Spanish population in 2006. Excess body weight prevalence data were obtained from the 2006 National Health Survey (NHS), while the prevalence of associated morbidities was extracted from the 2006 NHS and from a national hospital data base. Population attributable fractions were applied and disability attributable was expressed as years life with disability (YLD). In 2006, in the Spanish population aged 35-79 years, 791.650 YLD were lost due to higher than optimal body mass index (46.7% in males and 53.3% in females). Overweight (body mass index 25-29.9) accounted for 45.7% of total YLD. Males YLD were higher than females under 60. The 35-39 quinquennial group showed a difference for males of 16.6% while in the 74-79 group the difference was 23.8% for women. Osteoarthritis and chronic back pain accounted for 60% of YLD while hypertensive disease and type 2 diabetes mellitus were responsible of 37%. Excess body weight is a health risk related to the development of various diseases with an important associated disability burden and social and economical cost. YLD analysis is a useful monitor tool for disease control interventions. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  1. ICT and international corporate taxation: tax attributes and scope of taxation

    OpenAIRE

    Schäfer, Anne; Spengel, Christoph

    2002-01-01

    In this paper, an outline of the consequences of the increased use of ICT on international corporate taxation, namely on the tax attributes and the scope of taxation, is given. It is argued that the concept of capital export neutrality shall prevail, as it is deemed to be the most appropriate to the changed economic structure. With regard to the tax attributes in the source state, an enlargement of the notion of a permanent establishment in order to shift tax revenues to the source state is n...

  2. Belgrade waterworks groundwater source

    International Nuclear Information System (INIS)

    Sotic, A.; Dasic, M.; Vukcevic, G.; Vasiljevic, Lj.; Nikolic, S.

    2002-01-01

    Paper deals with Belgrade Waterworks groundwater source, its characteristics, conception of protection programme, contaminations on source and with parameters of groundwater quality degradation. Groundwaters present natural heritage with their strategic and slow renewable natural resources attributes, and as such they require priority in protection. It is of greatest need that existing source is to be protected and used optimally for producing quality drinkable water. The concept of source protection programme should be based on regular water quality monitoring, identification of contaminators, defining areas of their influences on the source and their permanent control. However, in the last 10 years, but drastically in the last 3, because of the overall situation in the country, it is very characteristic downfall in volume of business, organisation and the level of supply of the technical equipment

  3. Maturation of social attribution skills in typically developing children: an investigation using the social attribution task.

    Science.gov (United States)

    Hu, Zhouyi; Chan, Raymond C K; McAlonan, Grainne M

    2010-02-03

    The assessment of social attribution skills in children can potentially identify and quantify developmental difficulties related to autism spectrum disorders and related conditions. However, relatively little is known about how these skills develop in typically developing children. Therefore the present study aimed to map the trajectory of social attribution skill acquisition in typically developing children from a young age. In the conventional social attribution task (SAT) participants ascribe feelings to moving shapes and describe their interaction in social terms. However, this format requires that participants understand both, that an inanimate shape is symbolic, and that its action is social in nature. This may be challenging for young children, and may be a potential confounder in studies of children with developmental disorders. Therefore we developed a modified SAT (mSAT) using animate figures (e.g. animals) to simplify the task. We used the SAT and mSAT to examine social attribution skill development in 154 healthy children (76 boys, 78 girls), ranging in age from 6 to 13 years and investigated the relationship between social attribution ability and executive function. The mSAT revealed a steady improvement in social attribution skills from the age of 6 years, and a significant advantage for girls compared to boys. In contrast, children under the age of 9 years performed at baseline on the conventional format and there were no gender differences apparent. Performance on neither task correlated with executive function after controlling for age and verbal IQ, suggesting that social attribution ability is independent of cognitive functioning. The present findings indicate that the mSAT is a sensitive measure of social attribution skills from a young age. This should be carefully considered when choosing assessments for young children and those with developmental disorders.

  4. Maturation of social attribution skills in typically developing children: an investigation using the social attribution task

    Directory of Open Access Journals (Sweden)

    Chan Raymond CK

    2010-02-01

    Full Text Available Abstract Background The assessment of social attribution skills in children can potentially identify and quantify developmental difficulties related to autism spectrum disorders and related conditions. However, relatively little is known about how these skills develop in typically developing children. Therefore the present study aimed to map the trajectory of social attribution skill acquisition in typically developing children from a young age. Methods In the conventional social attribution task (SAT participants ascribe feelings to moving shapes and describe their interaction in social terms. However, this format requires that participants understand both, that an inanimate shape is symbolic, and that its action is social in nature. This may be challenging for young children, and may be a potential confounder in studies of children with developmental disorders. Therefore we developed a modified SAT (mSAT using animate figures (e.g. animals to simplify the task. We used the SAT and mSAT to examine social attribution skill development in 154 healthy children (76 boys, 78 girls, ranging in age from 6 to 13 years and investigated the relationship between social attribution ability and executive function. Results The mSAT revealed a steady improvement in social attribution skills from the age of 6 years, and a significant advantage for girls compared to boys. In contrast, children under the age of 9 years performed at baseline on the conventional format and there were no gender differences apparent. Performance on neither task correlated with executive function after controlling for age and verbal IQ, suggesting that social attribution ability is independent of cognitive functioning. The present findings indicate that the mSAT is a sensitive measure of social attribution skills from a young age. This should be carefully considered when choosing assessments for young children and those with developmental disorders.

  5. Preliminary hazards analysis -- vitrification process

    International Nuclear Information System (INIS)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P.

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility's construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment

  6. Preliminary hazards analysis -- vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.

  7. Sensory Attribute Identification Time Cannot Explain the Common Temporal Limit of Binding Different Attributes and Modalities

    Directory of Open Access Journals (Sweden)

    Waka Fujisaki

    2011-10-01

    Full Text Available An informative performance measure of the brain's integration across different sensory attributes/modalities is the critical temporal rate of feature alternation (between, eg, red and green beyond which observers could not identify the feature value specified by a timing signal from another attribute (eg, a pitch change. Interestingly, this limit, which we called the critical crowding frequency (CCF, is fairly low and nearly constant (∼2.5 Hz regardless of the combination of attributes and modalities (Fujisaki & Nishida, 2010, IMRF. One may consider that the CCF reflects the processing time required for the brain to identify the specified feature value on the fly. According to this idea, the similarity in CCF could be ascribed to the similarity in identification time for the attributes we used (luminance, color, orientation, pitch, vibration. To test this idea, we estimated the identification time of each attribute from [Go/ No-Go choice reaction time – simple reaction time]. In disagreement with the prediction, we found significant differences among attributes (eg, ∼160 ms for orientation, ∼70 ms for pitch. The results are more consistent with our proposal (Fujisaki & Nishida, Proc Roy Soc B that the CCF reflects the common rate limit of specifying what happens when (timing-content binding by a central, presumably postdictive, mechanism.

  8. High efficiency atomic hydrogen source

    International Nuclear Information System (INIS)

    Lagomarsino, V.; Bassi, D.; Bertok, E.; De Paz, M.; Tommasini, F.

    1974-01-01

    This work presents preliminary results of research intended to produce a M.W. discharge atomic hydrogen source with good dissociation at pressures larger than 10 torr. Analysis of the recombination process at these pressures shows that the volume recombination by three body collisions may be more important than wall recombination or loss of atoms by diffusion and flow outside the discharge region

  9. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part of the w......The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...... of the work is also to setup the kernel of a software tool for the visibility analysis thatshould be easily expandable to consider more complex strucures for future activities.This analysis is part of the UVISS assessment study and it is meant to provide elementsfor the definition and the selection...

  10. A systematic review of ecological attributes that confer resilience to climate change in environmental restoration.

    Directory of Open Access Journals (Sweden)

    Britta L Timpane-Padgham

    Full Text Available Ecological restoration is widely practiced as a means of rehabilitating ecosystems and habitats that have been degraded or impaired through human use or other causes. Restoration practices now are confronted by climate change, which has the potential to influence long-term restoration outcomes. Concepts and attributes from the resilience literature can help improve restoration and monitoring efforts under changing climate conditions. We systematically examined the published literature on ecological resilience to identify biological, chemical, and physical attributes that confer resilience to climate change. We identified 45 attributes explicitly related to climate change and classified them as individual- (9, population- (6, community- (7, ecosystem- (7, or process-level attributes (16. Individual studies defined resilience as resistance to change or recovery from disturbance, and only a few studies explicitly included both concepts in their definition of resilience. We found that individual and population attributes generally are suited to species- or habitat-specific restoration actions and applicable at the population scale. Community attributes are better suited to habitat-specific restoration at the site scale, or system-wide restoration at the ecosystem scale. Ecosystem and process attributes vary considerably in their type and applicability. We summarize these relationships in a decision support table and provide three example applications to illustrate how these classifications can be used to prioritize climate change resilience attributes for specific restoration actions. We suggest that (1 including resilience as an explicit planning objective could increase the success of restoration projects, (2 considering the ecological context and focal scale of a restoration action is essential in choosing appropriate resilience attributes, and (3 certain ecological attributes, such as diversity and connectivity, are more commonly considered to

  11. A systematic review of ecological attributes that confer resilience to climate change in environmental restoration.

    Science.gov (United States)

    Timpane-Padgham, Britta L; Beechie, Tim; Klinger, Terrie

    2017-01-01

    Ecological restoration is widely practiced as a means of rehabilitating ecosystems and habitats that have been degraded or impaired through human use or other causes. Restoration practices now are confronted by climate change, which has the potential to influence long-term restoration outcomes. Concepts and attributes from the resilience literature can help improve restoration and monitoring efforts under changing climate conditions. We systematically examined the published literature on ecological resilience to identify biological, chemical, and physical attributes that confer resilience to climate change. We identified 45 attributes explicitly related to climate change and classified them as individual- (9), population- (6), community- (7), ecosystem- (7), or process-level attributes (16). Individual studies defined resilience as resistance to change or recovery from disturbance, and only a few studies explicitly included both concepts in their definition of resilience. We found that individual and population attributes generally are suited to species- or habitat-specific restoration actions and applicable at the population scale. Community attributes are better suited to habitat-specific restoration at the site scale, or system-wide restoration at the ecosystem scale. Ecosystem and process attributes vary considerably in their type and applicability. We summarize these relationships in a decision support table and provide three example applications to illustrate how these classifications can be used to prioritize climate change resilience attributes for specific restoration actions. We suggest that (1) including resilience as an explicit planning objective could increase the success of restoration projects, (2) considering the ecological context and focal scale of a restoration action is essential in choosing appropriate resilience attributes, and (3) certain ecological attributes, such as diversity and connectivity, are more commonly considered to confer

  12. Antares: preliminary demonstrator results

    International Nuclear Information System (INIS)

    Kouchner, A.

    2000-05-01

    The ANTARES collaboration is building an undersea neutrino telescope off Toulon (Mediterranean sea) with effective area ∼ 0.1 km 2 . An extensive study of the site properties has been achieved together with software analysis in order to optimize the performance of the detector. Results are summarized here. An instrumented line, linked to shore for first time via an electro-optical cable, has been immersed late 1999. The preliminary results of this demonstrator line are reported. (author)

  13. Parameter uncertainty in simulations of extreme precipitation and attribution studies.

    Science.gov (United States)

    Timmermans, B.; Collins, W. D.; O'Brien, T. A.; Risser, M. D.

    2017-12-01

    The attribution of extreme weather events, such as heavy rainfall, to anthropogenic influence involves the analysis of their probability in simulations of climate. The climate models used however, such as the Community Atmosphere Model (CAM), employ approximate physics that gives rise to "parameter uncertainty"—uncertainty about the most accurate or optimal values of numerical parameters within the model. In particular, approximate parameterisations for convective processes are well known to be influential in the simulation of precipitation extremes. Towards examining the impact of this source of uncertainty on attribution studies, we investigate the importance of components—through their associated tuning parameters—of parameterisations relating to deep and shallow convection, and cloud and aerosol microphysics in CAM. We hypothesise that as numerical resolution is increased the change in proportion of variance induced by perturbed parameters associated with the respective components is consistent with the decreasing applicability of the underlying hydrostatic assumptions. For example, that the relative influence of deep convection should diminish as resolution approaches that where convection can be resolved numerically ( 10 km). We quantify the relationship between the relative proportion of variance induced and numerical resolution by conducting computer experiments that examine precipitation extremes over the contiguous U.S. In order to mitigate the enormous computational burden of running ensembles of long climate simulations, we use variable-resolution CAM and employ both extreme value theory and surrogate modelling techniques ("emulators"). We discuss the implications of the relationship between parameterised convective processes and resolution both in the context of attribution studies and progression towards models that fully resolve convection.

  14. Adjusted permutation method for multiple attribute decision making with meta-heuristic solution approaches

    Directory of Open Access Journals (Sweden)

    Hossein Karimi

    2011-04-01

    Full Text Available The permutation method of multiple attribute decision making has two significant deficiencies: high computational time and wrong priority output in some problem instances. In this paper, a novel permutation method called adjusted permutation method (APM is proposed to compensate deficiencies of conventional permutation method. We propose Tabu search (TS and particle swarm optimization (PSO to find suitable solutions at a reasonable computational time for large problem instances. The proposed method is examined using some numerical examples to evaluate the performance of the proposed method. The preliminary results show that both approaches provide competent solutions in relatively reasonable amounts of time while TS performs better to solve APM.

  15. Burden attributable to child maltreatment in Australia.

    Science.gov (United States)

    Moore, Sophie E; Scott, James G; Ferrari, Alize J; Mills, Ryan; Dunne, Michael P; Erskine, Holly E; Devries, Karen M; Degenhardt, Louisa; Vos, Theo; Whiteford, Harvey A; McCarthy, Molly; Norman, Rosana E

    2015-10-01

    Child maltreatment is a complex phenomenon, with four main types (childhood sexual abuse, physical abuse, emotional abuse, and neglect) highly interrelated. All types of maltreatment have been linked to adverse health consequences and exposure to multiple forms of maltreatment increases risk. In Australia to date, only burden attributable to childhood sexual abuse has been estimated. This study synthesized the national evidence and quantified the burden attributable to the four main types of child maltreatment. Meta-analyses, based on quality-effects models, generated pooled prevalence estimates for each maltreatment type. Exposure to child maltreatment was examined as a risk factor for depressive disorders, anxiety disorders and intentional self-harm using counterfactual estimation and comparative risk assessment methods. Adjustments were made for co-occurrence of multiple forms of child maltreatment. Overall, an estimated 23.5% of self-harm, 20.9% of anxiety disorders and 15.7% of depressive disorders burden in males; and 33.0% of self-harm, 30.6% of anxiety disorders and 22.8% of depressive disorders burden in females was attributable to child maltreatment. Child maltreatment was estimated to cause 1.4% (95% uncertainty interval 0.4-2.3%) of all disability-adjusted life years (DALYs) in males, and 2.4% (0.7-4.1%) of all DALYs in females in Australia in 2010. Child maltreatment contributes to a substantial proportion of burden from depressive and anxiety disorders and intentional self-harm in Australia. This study demonstrates the importance of including all forms of child maltreatment as risk factors in future burden of disease studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Nuclear Forensics and Attribution: A National Laboratory Perspective

    Science.gov (United States)

    Hall, Howard L.

    2008-04-01

    Current capabilities in technical nuclear forensics - the extraction of information from nuclear and/or radiological materials to support the attribution of a nuclear incident to material sources, transit routes, and ultimately perpetrator identity - derive largely from three sources: nuclear weapons testing and surveillance programs of the Cold War, advances in analytical chemistry and materials characterization techniques, and abilities to perform ``conventional'' forensics (e.g., fingerprints) on radiologically contaminated items. Leveraging that scientific infrastructure has provided a baseline capability to the nation, but we are only beginning to explore the scientific challenges that stand between today's capabilities and tomorrow's requirements. These scientific challenges include radically rethinking radioanalytical chemistry approaches, developing rapidly deployable sampling and analysis systems for field applications, and improving analytical instrumentation. Coupled with the ability to measure a signature faster or more exquisitely, we must also develop the ability to interpret those signatures for meaning. This requires understanding of the physics and chemistry of nuclear materials processes well beyond our current level - especially since we are unlikely to ever have direct access to all potential sources of nuclear threat materials.

  17. Detection and attribution of extreme weather disasters

    Science.gov (United States)

    Huggel, Christian; Stone, Dáithí; Hansen, Gerrit

    2014-05-01

    Single disasters related to extreme weather events have caused loss and damage on the order of up to tens of billions US dollars over the past years. Recent disasters fueled the debate about whether and to what extent these events are related to climate change. In international climate negotiations disaster loss and damage is now high on the agenda, and related policy mechanisms have been discussed or are being implemented. In view of funding allocation and effective risk reduction strategies detection and attribution to climate change of extreme weather events and disasters is a key issue. Different avenues have so far been taken to address detection and attribution in this context. Physical climate sciences have developed approaches, among others, where variables that are reasonably sampled over climatically relevant time periods and related to the meteorological characteristics of the extreme event are examined. Trends in these variables (e.g. air or sea surface temperatures) are compared between observations and climate simulations with and without anthropogenic forcing. Generally, progress has been made in recent years in attribution of changes in the chance of some single extreme weather events to anthropogenic climate change but there remain important challenges. A different line of research is primarily concerned with losses related to the extreme weather events over time, using disaster databases. A growing consensus is that the increase in asset values and in exposure are main drivers of the strong increase of economic losses over the past several decades, and only a limited number of studies have found trends consistent with expectations from climate change. Here we propose a better integration of existing lines of research in detection and attribution of extreme weather events and disasters by applying a risk framework. Risk is thereby defined as a function of the probability of occurrence of an extreme weather event, and the associated consequences

  18. Model Action Plan for Nuclear Forensics and Nuclear Attribution

    International Nuclear Information System (INIS)

    Dudder, G B; Niemeyer, S; Smith, D K; Kristo, M J

    2004-01-01

    Nuclear forensics and nuclear attribution have become increasingly important tools in the fight against illegal trafficking in nuclear and radiological materials. This technical report documents the field of nuclear forensics and nuclear attribution in a comprehensive manner, summarizing tools and procedures that have heretofore been described independently in the scientific literature. This report also provides national policy-makers, decision-makers, and technical managers with guidance for responding to incidents involving the interdiction of nuclear and radiological materials. However, due to the significant capital costs of the equipment and the specialized expertise of the personnel, work in the field of nuclear forensics has been restricted so far to a handful of national and international laboratories. In fact, there are a limited number of specialists who have experience working with interdicted nuclear materials and affiliated evidence. Most of the laboratories that have the requisite equipment, personnel, and experience to perform nuclear forensic analysis are participants in the Nuclear Smuggling International Technical Working Group or ITWG (see Section 1.8). Consequently, there is a need to disseminate information on an appropriate response to incidents of nuclear smuggling, including a comprehensive approach to gathering evidence that meets appropriate legal standards and to developing insights into the source and routes of nuclear and radiological contraband. Appendix A presents a ''Menu of Options'' for other Member States to request assistance from the ITWG Nuclear Forensics Laboratories (INFL) on nuclear forensic cases

  19. Using the drinking water of the Municipality of St-Gingolph, Switzerland for power generation - Preliminary study; Turbinage des eaux potables de la commune de St-Gingolph. 1{sup ere} partie: Source de la Tine - Palier superieur. 2{sup e} partie: Sources de la Tine et de Clarive - Palier inferieur

    Energy Technology Data Exchange (ETDEWEB)

    Moukhliss, H.

    2008-07-15

    This illustrated report subdivided in two parts presents the preliminary study of a project aiming at installing two small-scale hydroelectric schemes on the drinking water supply network of the Municipality of St-Gingolph, Switzerland. The upper-spring (La Tine) water can be used in a 44 kW hydro power scheme (elevation difference: 121 m; water volume through the turbine: 1,240,000 m{sup 3}/y). This water could be added to the one from the Clarive spring, enabling the installation a second hydro power scheme with a power of 291 kW (elevation difference: 337 m; water volume through the turbine: 2,740'000 m{sup 3}/y). The estimated cost of the produced electricity is attractive: CHF 0.16/kWh for the La Tine scheme; CHF 0.11 for the Clarive scheme. The author recommends the construction of both schemes.

  20. Compositional attribution of non-provenienced Maya polychrome vessels

    International Nuclear Information System (INIS)

    Bishop, R.L.; Harbottle, G.; Reents, D.J.; Sayre, E.V.; van Zelst, L.

    1983-01-01

    Procedures and a few of the results of the Maya ceramic project are discussed from the perspective of non-provenienced vessel attribution ranging from site specific through a more inferential level to the rather hypothetical. The examples presented serve to illustrate the manner in which compositional and stylistic covariation are viewed in an investigation of Maya Ceramic art. The large data base from neutron activation analysis including archaeologically recovered pottery as well as the stylistically and iconographically elaborate vessels requires continued refinement in our methods of statistical analysis along with gaining a greater understanding of the sources of ceramic compositional variation in the Maya area. The mutually beneficial collaboration between science, art, and archaeology are emphasized

  1. Compositional attribution of non-provenienced Maya polychrome vessels

    Energy Technology Data Exchange (ETDEWEB)

    Bishop, R.L.; Harbottle, G.; Reents, D.J.; Sayre, E.V.; van Zelst, L.

    1983-01-01

    Procedures and a few of the results of the Maya ceramic project are discussed from the perspective of non-provenienced vessel attribution ranging from site specific through a more inferential level to the rather hypothetical. The examples presented serve to illustrate the manner in which compositional and stylistic covariation are viewed in an investigation of Maya Ceramic art. The large data base from neutron activation analysis including archaeologically recovered pottery as well as the stylistically and iconographically elaborate vessels requires continued refinement in our methods of statistical analysis along with gaining a greater understanding of the sources of ceramic compositional variation in the Maya area. The mutually beneficial collaboration between science, art, and archaeology are emphasized.

  2. SENSORY ATTRIBUTES AND CONSUMPTION OF MELON ...

    African Journals Online (AJOL)

    IBUKUN

    source of the minerals copper, manganese, molybdenum, phosphorus, and potassium; the B vitamin ... meat and dairy with soy would also lower total cholesterol intake by about 125 milligrams per ... leafy, yellow and green vegetables.

  3. Variable precision rough set for multiple decision attribute analysis

    Institute of Scientific and Technical Information of China (English)

    Lai; Kin; Keung

    2008-01-01

    A variable precision rough set (VPRS) model is used to solve the multi-attribute decision analysis (MADA) problem with multiple conflicting decision attributes and multiple condition attributes. By introducing confidence measures and a β-reduct, the VPRS model can rationally solve the conflicting decision analysis problem with multiple decision attributes and multiple condition attributes. For illustration, a medical diagnosis example is utilized to show the feasibility of the VPRS model in solving the MADA...

  4. 双源CT双能量虚拟平扫在结直肠病变的应用%Preliminary Application of Dual-energy Dual-source CT Virtual Non-contrast Imaging in Colorectal Lesions

    Institute of Scientific and Technical Information of China (English)

    王勇; 雷静; 韩丹; 赵卫; 杨石平; 熊倩

    2014-01-01

    Purpose To assess the feasibility of applying dual-energy dual-source CT virtual non-contrast (VNC) imaging in the diagnosis of colorectal diseases. Materials and Methods Eighty-ifve patients with clinically suspected colorectal lesions underwent abdominal CT scan as well as arterial and venous phase dual-energy enhanced scan, VCN images of arterial and venous phase were obtained using the dual-energy software, the differences of image quality, radiation dose and diagnostic coincidence rate between the true non-contrast scan and VNC images were compared. Results The radiation dose of two-phase dual-energy scan was 34.8%lower when compared with the conventional three-phase scans. The CT values of the intestinal lesions, metastasis lymph nodes and intestinal fat in VNC were lower than the true unenhanced scan (P0.05), and neither was the diagnostic coincidence rate for intestinal diseases (P>0.05). The noise level of images obtained from VNC was lower than that of the real non-contrast scan (P0.05). Conclusion For colorectal lesions, the virtual non-contrast images from the dual-energy dual-source CT scan can be used to reduce the radiation dose without effecting image quality and diagnosis accuracy.%目的:探讨双源CT双能量虚拟平扫(VNC)技术在结直肠病变诊断中应用的可行性。资料与方法对85例临床疑诊结直肠病变患者行腹部CT平扫及动、静脉期双能量增强扫描,经双能软件处理得到动、静脉期VNC图,比较真实平扫与VNC在图像质量、辐射剂量及诊断符合率方面的差异。结果双能双期扫描辐射剂量较常规三期扫描辐射剂量降低约34.8%。VNC CT值在肠道病变、转移淋巴结、肠周脂肪中低于真实平扫(P0.05)。真实平扫及动、静脉期VNC观察到的肠壁厚度、淋巴结大小、周围侵犯及肝转移差异无统计学意义(P>0.05),对肠道疾病的诊断符合率差异无统计学意义(P>0.05)。VNC

  5. Nonintrusive verification attributes for excess fissile materials

    International Nuclear Information System (INIS)

    Nicholas, N.J.; Eccleston, G.W.; Fearey, B.L.

    1997-10-01

    Under US initiatives, over two hundred metric tons of fissile materials have been declared to be excess to national defense needs. These excess materials are in both classified and unclassified forms. The US has expressed the intent to place these materials under international inspections as soon as practicable. To support these commitments, members of the US technical community are examining a variety of nonintrusive approaches (i.e., those that would not reveal classified or sensitive information) for verification of a range of potential declarations for these classified and unclassified materials. The most troublesome and potentially difficult issues involve approaches for international inspection of classified materials. The primary focus of the work to date has been on the measurement of signatures of relevant materials attributes (e.g., element, identification number, isotopic ratios, etc.), especially those related to classified materials and items. The authors are examining potential attributes and related measurement technologies in the context of possible verification approaches. The paper will discuss the current status of these activities, including their development, assessment, and benchmarking status

  6. Modeling Aquatic Macroinvertebrate Richness Using Landscape Attributes

    Directory of Open Access Journals (Sweden)

    Marcia S. Meixler

    2015-01-01

    Full Text Available We used a rapid, repeatable, and inexpensive geographic information system (GIS approach to predict aquatic macroinvertebrate family richness using the landscape attributes stream gradient, riparian forest cover, and water quality. Stream segments in the Allegheny River basin were classified into eight habitat classes using these three landscape attributes. Biological databases linking macroinvertebrate families with habitat classes were developed using life habits, feeding guilds, and water quality preferences and tolerances for each family. The biological databases provided a link between fauna and habitat enabling estimation of family composition in each habitat class and hence richness predictions for each stream segment. No difference was detected between field collected and modeled predictions of macroinvertebrate families in a paired t-test. Further, predicted stream gradient, riparian forest cover, and total phosphorus, total nitrogen, and suspended sediment classifications matched observed classifications much more often than by chance alone. High gradient streams with forested riparian zones and good water quality were predicted to have the greatest macroinvertebrate family richness and changes in water quality were predicted to have the greatest impact on richness. Our findings indicate that our model can provide meaningful landscape scale macroinvertebrate family richness predictions from widely available data for use in focusing conservation planning efforts.

  7. Attributability of health effects at low radiation doses

    International Nuclear Information System (INIS)

    Gonzalez, Abel

    2008-01-01

    without allowing for the uncertain possibility of a universal low-dose threshold, concludes that the evidence does not favour the existence of such a universal threshold. Consequently, radiation protection measures ought to be applied to radiation exposure situations involving low radiation doses; 2) They are improvable at individual level. The effect occurrence on specific individuals is not demonstrable on a yes-no basis. Its reality is axiomatic: namely taken by granted as self-evident, solely based on the acceptance of the LNT hypothesis as the only true basis for argument or inference. It is unfeasible to demonstrate the existence of the effects by uncontestable evidence: the truth, validity, or genuineness of their diagnosis for specific individuals cannot be tested and the diagnostic correctness cannot be checked; 3) Their individual causation is counterfactual. The proposition 'a radiation exposure situation caused a health effect on an individual' cannot be explained in terms of the counterfactual conditional 'if the radiation exposure situation had not occurred, then the health effect would not have occurred'; 4) Their occurrence is not individually attestable. In addition to their improvability, any formal proof of the existence of a radiation health effect on any specific individual is generally absent and impossible to obtain at low radiation doses and cannot be established through scientific evidence. The papers winds up that attributability, namely the assumption that some health effect occurs as the result of a given low-dose radiation exposure situation, are distinct notions at the collective and individual level. It then concludes the following: - Increases in the effect (collective) prevalence can be attributable in the sense that the radiological impact on a population can, under certain conditions, be ascribed, namely credited, assigned, and imputed to a specific exposure situation as its cause or source. Attributability is only conditional on the

  8. Attributability of Health Effects at Low Radiation Doses

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    2011-01-01

    without allowing for the uncertain possibility of a universal low-dose threshold, concludes that the evidence does not favour the existence of such a universal threshold. Consequently, radiation protection measures ought to be applied to radiation exposure situations involving low radiation doses. (ii) They are improvable at individual level. The effect occurrence on specific individuals is not demonstrable on a yes-no basis. Its reality is axiomatic: namely taken by granted as self-evident, solely based on the acceptance of the LNT hypothesis as the only true basis for argument or inference. It is unfeasible to demonstrate the existence of the effects by uncontestable evidence: the truth, validity, or genuineness of their diagnosis for specific individuals cannot be tested and the diagnostic correctness cannot be checked. (iii) Their individual causation is counterfactual. The proposition 'a radiation exposure situation caused a health effect on an individual' cannot be explained in terms of the counterfactual conditional 'if the radiation exposure situation had not occurred, then the health effect would not have occurred'. (iv) Their occurrence is not individually attestable. In addition to their improvability, any formal proof of the existence of a radiation health effect on any specific individual is generally absent and impossible to obtain at low radiation doses and cannot be established through scientific evidence. The papers winds up that attributability, namely the assumption that some health effect occurs as the result of a given low-dose radiation exposure situation, are distinct notions at the collective and individual level. It then concludes the following: - Increases in the effect (collective) prevalence can be attributable in the sense that the radiological impact on a population can, under certain conditions, be ascribed, namely credited, assigned, and imputed to a specific exposure situation as its cause or source. Attributability is only conditional on

  9. Calibration of Seismic Attributes for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Wayne D. Pennington

    2002-09-29

    The project, "Calibration of Seismic Attributes for Reservoir Characterization," is now complete. Our original proposed scope of work included detailed analysis of seismic and other data from two to three hydrocarbon fields; we have analyzed data from four fields at this level of detail, two additional fields with less detail, and one other 2D seismic line used for experimentation. We also included time-lapse seismic data with ocean-bottom cable recordings in addition to the originally proposed static field data. A large number of publications and presentations have resulted from this work, inlcuding several that are in final stages of preparation or printing; one of these is a chapter on "Reservoir Geophysics" for the new Petroleum Engineering Handbook from the Society of Petroleum Engineers. Major results from this project include a new approach to evaluating seismic attributes in time-lapse monitoring studies, evaluation of pitfalls in the use of point-based measurements and facies classifications, novel applications of inversion results, improved methods of tying seismic data to the wellbore, and a comparison of methods used to detect pressure compartments. Some of the data sets used are in the public domain, allowing other investigators to test our techniques or to improve upon them using the same data. From the public-domain Stratton data set we have demonstrated that an apparent correlation between attributes derived along 'phantom' horizons are artifacts of isopach changes; only if the interpreter understands that the interpretation is based on this correlation with bed thickening or thinning, can reliable interpretations of channel horizons and facies be made. From the public-domain Boonsville data set we developed techniques to use conventional seismic attributes, including seismic facies generated under various neural network procedures, to subdivide regional facies determined from logs into productive and non-productive subfacies, and we

  10. CALIBRATION OF SEISMIC ATTRIBUTES FOR RESERVOIR CHARACTERIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Wayne D. Pennington; Horacio Acevedo; Aaron Green; Joshua Haataja; Shawn Len; Anastasia Minaeva; Deyi Xie

    2002-10-01

    The project, ''Calibration of Seismic Attributes for Reservoir Calibration,'' is now complete. Our original proposed scope of work included detailed analysis of seismic and other data from two to three hydrocarbon fields; we have analyzed data from four fields at this level of detail, two additional fields with less detail, and one other 2D seismic line used for experimentation. We also included time-lapse seismic data with ocean-bottom cable recordings in addition to the originally proposed static field data. A large number of publications and presentations have resulted from this work, including several that are in final stages of preparation or printing; one of these is a chapter on ''Reservoir Geophysics'' for the new Petroleum Engineering Handbook from the Society of Petroleum Engineers. Major results from this project include a new approach to evaluating seismic attributes in time-lapse monitoring studies, evaluation of pitfalls in the use of point-based measurements and facies classifications, novel applications of inversion results, improved methods of tying seismic data to the wellbore, and a comparison of methods used to detect pressure compartments. Some of the data sets used are in the public domain, allowing other investigators to test our techniques or to improve upon them using the same data. From the public-domain Stratton data set we have demonstrated that an apparent correlation between attributes derived along ''phantom'' horizons are artifacts of isopach changes; only if the interpreter understands that the interpretation is based on this correlation with bed thickening or thinning, can reliable interpretations of channel horizons and facies be made. From the public-domain Boonsville data set we developed techniques to use conventional seismic attributes, including seismic facies generated under various neural network procedures, to subdivide regional facies determined from logs into

  11. Attribute importance segmentation of Norwegian seafood consumers: The inclusion of salient packaging attributes.

    Science.gov (United States)

    Olsen, Svein Ottar; Tuu, Ho Huu; Grunert, Klaus G

    2017-10-01

    The main purpose of this study is to identify consumer segments based on the importance of product attributes when buying seafood for homemade meals on weekdays. There is a particular focus on the relative importance of the packaging attributes of fresh seafood. The results are based on a representative survey of 840 Norwegian consumers between 18 and 80 years of age. This study found that taste, freshness, nutritional value and naturalness are the most important attributes for the home consumption of seafood. Except for the high importance of information about expiration date, most other packaging attributes have only medium importance. Three consumer segments are identified based on the importance of 33 attributes associated with seafood: Perfectionists, Quality Conscious and Careless Consumers. The Quality Conscious consumers feel more self-confident in their evaluation of quality, and are less concerned with packaging, branding, convenience and emotional benefits compared to the Perfectionists. Careless Consumers are important as regular consumers of convenient and pre-packed seafood products and value recipe information on the packaging. The seafood industry may use the results provided in this study to strengthen their positioning of seafood across three different consumer segments. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Preliminary study on improving safety culture in Malaysian nuclear industries

    International Nuclear Information System (INIS)

    Ibrahim, Sabariah Kader; Lee, Y. E.

    2012-01-01

    This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed

  13. Preliminary study on improving safety culture in Malaysian nuclear industries

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim, Sabariah Kader [KAIST, Daejeon (Korea, Republic of); Lee, Y. E. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2012-10-15

    This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed.

  14. Applying an efficient K-nearest neighbor search to forest attribute imputation

    Science.gov (United States)

    Andrew O. Finley; Ronald E. McRoberts; Alan R. Ek

    2006-01-01

    This paper explores the utility of an efficient nearest neighbor (NN) search algorithm for applications in multi-source kNN forest attribute imputation. The search algorithm reduces the number of distance calculations between a given target vector and each reference vector, thereby, decreasing the time needed to discover the NN subset. Results of five trials show gains...

  15. Harmonic regression of Landsat time series for modeling attributes from national forest inventory data

    Science.gov (United States)

    Barry T. Wilson; Joseph F. Knight; Ronald E. McRoberts

    2018-01-01

    Imagery from the Landsat Program has been used frequently as a source of auxiliary data for modeling land cover, as well as a variety of attributes associated with tree cover. With ready access to all scenes in the archive since 2008 due to the USGS Landsat Data Policy, new approaches to deriving such auxiliary data from dense Landsat time series are required. Several...

  16. Fundamental(ist) attribution error: Protestants are dispositionally focused.

    Science.gov (United States)

    Li, Yexin Jessica; Johnson, Kathryn A; Cohen, Adam B; Williams, Melissa J; Knowles, Eric D; Chen, Zhansheng

    2012-02-01

    Attribution theory has long enjoyed a prominent role in social psychological research, yet religious influences on attribution have not been well studied. We theorized and tested the hypothesis that Protestants would endorse internal attributions to a greater extent than would Catholics, because Protestantism focuses on the inward condition of the soul. In Study 1, Protestants made more internal, but not external, attributions than did Catholics. This effect survived controlling for Protestant work ethic, need for structure, and intrinsic and extrinsic religiosity. Study 2 showed that the Protestant-Catholic difference in internal attributions was significantly mediated by Protestants' greater belief in a soul. In Study 3, priming religion increased belief in a soul for Protestants but not for Catholics. Finally, Study 4 found that experimentally strengthening belief in a soul increased dispositional attributions among Protestants but did not change situational attributions. These studies expand the understanding of cultural differences in attributions by demonstrating a distinct effect of religion on dispositional attributions.

  17. Environmental Survey preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

  18. Ruiz Volcano: Preliminary report

    Science.gov (United States)

    Ruiz Volcano, Colombia (4.88°N, 75.32°W). All times are local (= GMT -5 hours).An explosive eruption on November 13, 1985, melted ice and snow in the summit area, generating lahars that flowed tens of kilometers down flank river valleys, killing more than 20,000 people. This is history's fourth largest single-eruption death toll, behind only Tambora in 1815 (92,000), Krakatau in 1883 (36,000), and Mount Pelée in May 1902 (28,000). The following briefly summarizes the very preliminary and inevitably conflicting information that had been received by press time.

  19. Assessment of Andragogical Attributes of Distance Learners

    Science.gov (United States)

    Hashim, Rugayah Gy; Ahmad, Hashim; Ahmad, Nor'aini

    The purpose of this research was to assess the andragogical attribute of adult students engaged in distance learning, specifically, with regards to the main construct, cognitive engagement versus academic achievement. Five hundred students were sampled and the response rate was 33.8%. From the analyses, the overall mean score for cognitive engagement is 3.75 from a scale of one to seven. The results indicated that knowledge gained through the e-distance learning is low and this evidence correlates to the average academic performance or CGPA of the respondents, which is between 2.50-2.99. The findings indicated a low level of integration and motivation in learning and consequently it is suggested that training programs and additional course revisions be integrated into the curriculum to ensure the chances of student success and reduce attrition rate.

  20. A comparison of attribute sampling plans

    International Nuclear Information System (INIS)

    Lanning, B.M.

    1997-05-01

    This report describes, compares, and provides sample size selection criteria for the most common sampling plans for attribute data (i.e., data that is qualitative in nature such as Pass-Fail, Yes-No, Defect-Nondefect data). This report is being issued as a guide in prudently choosing the correct sampling plan to meet statistical plan objectives. The report discusses three types of sampling plans: AQL (Acceptable Quality Level expressed as a percent), RQL (Rejectable Quality Level as a percent), and the AQL/RQL plan which emphasizes both risks simultaneously. These plans are illustrated with six examples, one of which is an inventory of UF 6 cans whose weight must agree within 100 grams of its listed weight to be acceptable

  1. Otoconia biogenesis, phylogeny, composition and functional attributes

    Science.gov (United States)

    Fermin, C. D.; Lychakov, D.; Campos, A.; Hara, H.; Sondag, E.; Jones, T.; Jones, S.; Taylor, M.; Meza-Ruiz, G.; Martin, D. S.

    1998-01-01

    This work consolidates data about these interesting organic crystals of vertebrate inner ears. It addresses 5 aspects of inner ear otoliths not completely understood to date: 1) embryological data that explains the formation of the crystals, 2) the significance of the organic and the inorganic phase of the otolith and the changing patterns of otoconia formation along the evolutionary tree, 3) otoliths contribution for detecting linear acceleration, 4) the effect that altered gravity and aminoglycosides have on the development and adult shape of the crystals, and the evolutionary significance of a changing shape of the crystals from primitive forms (lamprey) to high vertebrate birds and mammals is discussed, 5) functional attributes of the otolithic organs and morphological modifications of the otoliths by physical and chemical insults are presented with an extensive discussion of the most relevant literature published and available to us.

  2. Preliminary design of a coffee harvester

    Directory of Open Access Journals (Sweden)

    Raphael Magalhães Gomes Moreira

    2016-10-01

    Full Text Available Design of an agricultural machine is a highly complex process due to interactions between the operator, machine, and environment. Mountain coffee plantations constitute an economic sector that requires huge investments for the development of agricultural machinery to improve the harvesting and post-harvesting processes and to overcome the scarcity of work forces in the fields. The aim of this study was to develop a preliminary design for a virtual prototype of a coffee fruit harvester. In this study, a project methodology was applied and adapted for the development of the following steps: project planning, informational design, conceptual design, and preliminary design. The construction of a morphological matrix made it possible to obtain a list of different mechanisms with specific functions. The union between these mechanisms resulted in variants, which were weighed to attribute scores for each selected criterion. From each designated proposal, two variants with the best scores were selected and this permitted the preparation of the preliminary design of both variants. The archetype was divided in two parts, namely the hydraulically articulated arms and the harvesting system that consisted of the vibration mechanism and the detachment mechanism. The proposed innovation involves the use of parallel rods, which were fixed in a plane and rectangular metal sheet. In this step, dimensions including a maximum length of 4.7 m, a minimum length of 3.3 m, and a total height of 2.15 m were identified based on the functioning of the harvester in relation to the coupling point of the tractor.

  3. Preliminary design of smart fuel

    International Nuclear Information System (INIS)

    Kim, Y.; Ha, D.; Park, S.; Nahm, K.; Lee, K.; Kim, J.

    2007-01-01

    SMART (System-integrated Modular Advanced Reactor) is a novel light water rector with a modular, integral primary system configuration. This concept has been developing a 660 MWt by Korean Nuclear Power Industry Group with KAERI. SMART is being developed for use as an energy source for small-scale power generation and seawater desalination. Although the design of SMART is based on the current pressurized water reactor technology, new technologies such as enhanced safety, and passive safety have been applied, and system simplification and modularization, innovations in manufacturing and installation technologies have been implemented culminating in a design that has enhanced safety and economy, and is environment -friendly. In this paper described the preliminary design of the nuclear Fuel for this SMART, the design concept and the characteristics of SMART Fuel. In specially this paper describe the optimization of grid span adjustment to improve the thermal performance of the SMART Fuel as well as to improve the seismic resistance performance of the SMART Fuel, it is not easy to improve the both performance simultaneously because of design parameter of each performance inversely proportional. SMART Fuel enable to extra-long extended fuel cycle length and resistance of proliferation, enhanced safety, improved economics and reduced nuclear waste

  4. Dual-source virtual non-contrast CT of the head: a preliminary study%双源CT虚拟平扫在头部检查的初步应用

    Institute of Scientific and Technical Information of China (English)

    黄伟; 郑纪永; 张建东; 刘瀚; 徐益明; 邵瑾; 金刚; 朱应礼; 葛高华; 卢道延; 冯宇; 井桂银

    2011-01-01

    )差异无统计学意义(χ2=0.00,P>0.05,Kappa值=0.895).在病灶水平,VNC图像显示出血灶53个,假阴性4个,无假阳性,敏感性、特异性、阳性预测值和阴性预测值分别为93.0%(53/57)、100.0%(38/38)、100.0%(53/53)和90.5%(38/42),VNC图像对出血灶的显示率与CNC差异无统计学意义(χ2=2.25,P>0.05,Kappa值=0.914);VNC图像显示低密度病灶38个,假阳性2个,假阴性13个,敏感性、特异性、阳性预测值和阴性预测值分别为73.5%(36/49)、96.4%(53/55)、94.7%(36/38)和80.3%(53/66),VNC图像对低密度病灶的显示率低于CNC(χ2=6.67,P<0.01,Kappa值=0.707).结论 与CNC相比,头部VNC辐射剂量低,但图像质量下降,对出血性病变具有替代CNC的潜在使用价值,对缺血性病变也有一定的参考价值.%Objective To investigate image quality and clinical value of dual-source dual energy virtual non-contrast (VNC) CT of the head. Methods Sixty-two patients suspected of cerebrovascular diseases underwent conventional non-contrast (CNC) CT and dual energy CTA examination of the head with dual-source CT. Virtual non-contrast images were reconstructed using dual energy software. The CT values of gray matter, white matter, cerebrospinal fluid, hyperdense hemorrhagic lesion and hypodense ischemic lesion were compared between CNC and VNC images. A four-score scale was used to assess image quality subjectively. Image noise, radiation dosage and detection rate were compared between CNC and VNC images. Paired t test, Wilcoxon signed ranks test and Chi-square test (McNemar test and Kappa test) were used. Results The CT value on CNC and VNC images, were (43. 3 ± 1.5) and (33. 2 ± 1.3) HU for gray matter (t = 46.98, P < 0. 01), (32. 9 ± 1.3) and (28.8 ± 1.6) HU for white matter(t = 16. 28, P <0.01), (9.0 ± 1.4) and (5.3 ± 1.9) HU for cerebrospinal fluid (t=12.41, P<0.01),(62.8 ±10.0) and (51.3 ± 11.5) HU for hyperdense lesion (Z = -4.37, P < 0.01), (20.7 ±4.7) and (18.0 ±6. 9) HU for hypodense lesion (t

  5. OMEGA Upgrade preliminary design

    International Nuclear Information System (INIS)

    Craxton, R.S.

    1989-10-01

    The OMEGA laser system at the Laboratory for Laser Energetics of the University of Rochester is the only major facility in the United States capable of conducting fully diagnosed, direct-drive, spherical implosion experiments. As such, it serves as the national Laser Users Facility, benefiting scientists throughout the country. The University's participation in the National Inertial Confinement Fusion (ICF) program underwent review by a group of experts under the auspices of the National Academy of Sciences (the Happer Committee) in 1985. The Happer Committee recommended that the OMEGA laser be upgraded in energy to 30 kJ. To this end, Congress appropriated $4,000,000 for the preliminary design of the OMEGA Upgrade, spread across FY88 and FY89. This document describes the preliminary design of the OMEGA Upgrade. The proposed enhancements to the existing OMEGA facility will result in a 30-kHJ, 351-nm, 60-beam direct-drive system, with a versatile pulse-shaping facility and a 1%--2% uniformity of target drive. The Upgrade will allow scientists to explore the ignition-scaling regime, and to study target behavior that is hydrodynamically equivalent to that of targets appropriate for a laboratory microfusion facility (LMF). In addition, it will be possible to perform critical interaction experiments with large-scale-length uniformly irradiated plasmas

  6. Packaging design as communicator of product attributes: Effects on consumers’ attribute inferences

    NARCIS (Netherlands)

    van Ooijen, I.

    2016-01-01

    This dissertation will focus on two types of attribute inferences that result from packaging design cues. First, the effects of product packaging design on quality related inferences are investigated. Second, the effects of product packaging design on healthiness related inferences are examined (See

  7. Methods and Model Dependency of Extreme Event Attribution: The 2015 European Drought

    Science.gov (United States)

    Hauser, Mathias; Gudmundsson, Lukas; Orth, René; Jézéquel, Aglaé; Haustein, Karsten; Vautard, Robert; van Oldenborgh, Geert J.; Wilcox, Laura; Seneviratne, Sonia I.

    2017-10-01

    Science on the role of anthropogenic influence on extreme weather events, such as heatwaves or droughts, has evolved rapidly in the past years. The approach of "event attribution" compares the occurrence-probability of an event in the present, factual climate with its probability in a hypothetical, counterfactual climate without human-induced climate change. Several methods can be used for event attribution, based on climate model simulations and observations, and usually researchers only assess a subset of methods and data sources. Here, we explore the role of methodological choices for the attribution of the 2015 meteorological summer drought in Europe. We present contradicting conclusions on the relevance of human influence as a function of the chosen data source and event attribution methodology. Assessments using the maximum number of models and counterfactual climates with pre-industrial greenhouse gas concentrations point to an enhanced drought risk in Europe. However, other evaluations show contradictory evidence. These results highlight the need for a multi-model and multi-method framework in event attribution research, especially for events with a low signal-to-noise ratio and high model dependency such as regional droughts.

  8. Attribution of precipitation changes in African rainforest

    Science.gov (United States)

    Otto, F. E. L.; Allen, M. R.; Bowery, A.; Imbers, J.; Jones, R.; Massey, N.; Miller, J.; Rosier, S.; Rye, C.; Thurston, M.; Wilson, S.; Yamazaki, H.

    2012-04-01

    Global climate change is almost certainly affecting the magnitude and frequency of extreme weather and hydrological events. However, whether and to what extend the occurrence of such an event can be attributed to climate change remains a challenge that relies on good observations as well as climate modelling. A number of recent studies have attempted to quantify the role of human influence on climate in observed weather events as e.g. the 2010 Russian heat wave (Dole et al, 2011; Rahmstorf and Coumou, 2011; Otto et al, 2012). The overall approach is to simulate, with as realistic a model as possible and accounting as far as possible for modelling uncertainties, both the statistics of observed weather and the statistics of the weather that would have obtained had specific external drivers of climate change been absent. This approach requires a large ensemble size to provide results from which the statistical significance and the shape of the distribution of key variables can be assessed. Also, a sufficiently long period of time must be simulated to evaluate model bias and whether the model captures the observed distribution. The weatherathome.net within the climateprediction.net projects provides such an ensemble with many hundred ensemble members per year via volunteer distributed computing. Most previous attribution studies have been about European extreme weather events but the most vulnerable regions to climate change are in Asia and Africa. One of the most complex hydrological systems is the tropical rainforest, which is expected to react highly sensible to a changing climate. Analysing the weatherathome.net results we find that conditions which are too dry for rainforests to sustain without damages occurred more frequently and more severe in recent years. Furthermore the changes in precipitation in that region can be linked to El Nino/ La Nina events. Linking extreme weather events to large-scale teleconnections helps to understand the occurrence of this

  9. Health attributes of ethnic vegetables consumed in the Eastern Anatolia region of Turkey: Antioxidant and enzyme-inhibitory properties

    Directory of Open Access Journals (Sweden)

    Abdullah Dalar

    2016-06-01

    Conclusions: Among the investigated ethnic vegetables, P. lanceolata and C. intybus represent a valuable source of antioxidant phytochemicals of phenolic nature that modulated in vitro the activities of digestive enzymes. These ethnic food sources diversify diet and enhance health attributes of foods.

  10. AVal: an Extensible Attribute-Oriented Programming Validator for Java

    OpenAIRE

    Noguera , Carlos; Pawlak , Renaud

    2007-01-01

    International audience; Attribute Oriented Programming (@OP ) permits programmers to extend the semantics of a base program by annotating it with attributes that are related to a set of concerns. Examples of this are applications that rely on XDoclet (such as Hibernate) or, with the release of Java5's annotations, EJB3. The set of attributes that implements a concern defines a Domain Specific Language, and as such, imposes syntactic and semantic rules on the way that attributes are included i...

  11. Addressing Attribution - Advances in Nuclear Forensics

    International Nuclear Information System (INIS)

    Luetzenkirchen, K.; Mayer, K.; Wallenius, M.; Varga, Z.

    2013-01-01

    In nuclear forensic investigations the information is typically used to find out the origin of the material including its production place and process. As nuclear material is an industrial product, the respective production process will unavoidably leave a 'fingerprint' in the material. In consequence, parameters related to process and source material are measured and conclusions about the history and origin of the nuclear material can be drawn. Chemical impurities, microstructure, molecular structure or isotopic composition are examples of such parameters, which compose a characteristic 'signature'. The rare-earth elemental (REE) pattern has been found to be an important signature to determine the type of ore used as source material for the production of uranium ore concentrate, since the REE pattern is invariable in most hydrometallurgical processes. Generally, Decrypting the information for nuclear forensic investigations requires sophisticated methodology, subject matter expertise and reference data. The paper is followed by the slides of the presentation. (A.C.)

  12. The hopelessness theory of depression: attributional aspects.

    Science.gov (United States)

    Alloy, L B; Abramson, L Y; Metalsky, G I; Hartlage, S

    1988-02-01

    In this article, we clarify, expand and revise the basic postulates of the hopelessness theory of depression (Abramson, Alloy & Metalsky, 1988a; Abramson, Metalsky & Alloy, 1987, 1988b; previously referred to as the reformulated helplessness theory of depression: Abramson, Seligman & Teasdale, 1978) and place the theory more explicitly in the context of work in descriptive psychiatry about the heterogeneity among the depressive disorders. We suggest that the hopelessness theory hypothesizes the existence in nature of an, as yet, unidentified subtype of depression--'hopelessness depression'--defined, in part, by its cause. We then give a critique of work conducted to test the hopelessness theory and explicate the limitations in research strategy associated with this line of work. Our critique includes a logical analysis that deduces the conceptual and methodological inadequacies of the research strategies used to test the theory. Finally, we suggest more adequate research strategies for testing the hopelessness theory and discuss conceptual and assessment issues that will arise in conducting such tests with special emphasis on attributional styles.

  13. Valuing Attributes of Fluid Milk in Laos

    Directory of Open Access Journals (Sweden)

    Jae Won Lee

    2017-09-01

    Full Text Available This study estimates the random utility function of fluid milk using 1,165 survey responses in Laos. It finds that both products’ attributes and individual characteristics affect consumers’ preference for the milk and the hypothetical brand of Laos-Korea has a potential compared to four real dairy products. Results also show that calories have a positive relationship with consumer’s preference while the price and fat content have a negative one. The decision for choosing each brand is significantly affected by individual characteristics such as gender, age, whether or not respondents live with their children, the level of education, income, the frequency of purchasing milk per week, and the region where they live. The preference for five brands appears in the order of Foremost, Nabong, Thai-Danish, Meiji, and Lao-Korea, and probabilities of purchasing each brand at the mean level are 30.9%, 17.48%, 21.48%, 15.0% and 10.39%, respectively. Nabong that was Lao national milk brand still has a significant market power even though it was closed in 2008. The policies to promote milk industry by implementing its national milk brand again would be more effective if it focuses on the young generation, female consumers, families with children, quality of dairy products, and Vientiane capital areas.

  14. Spontaneously emerging cortical representations of visual attributes

    Science.gov (United States)

    Kenet, Tal; Bibitchkov, Dmitri; Tsodyks, Misha; Grinvald, Amiram; Arieli, Amos

    2003-10-01

    Spontaneous cortical activity-ongoing activity in the absence of intentional sensory input-has been studied extensively, using methods ranging from EEG (electroencephalography), through voltage sensitive dye imaging, down to recordings from single neurons. Ongoing cortical activity has been shown to play a critical role in development, and must also be essential for processing sensory perception, because it modulates stimulus-evoked activity, and is correlated with behaviour. Yet its role in the processing of external information and its relationship to internal representations of sensory attributes remains unknown. Using voltage sensitive dye imaging, we previously established a close link between ongoing activity in the visual cortex of anaesthetized cats and the spontaneous firing of a single neuron. Here we report that such activity encompasses a set of dynamically switching cortical states, many of which correspond closely to orientation maps. When such an orientation state emerged spontaneously, it spanned several hypercolumns and was often followed by a state corresponding to a proximal orientation. We suggest that dynamically switching cortical states could represent the brain's internal context, and therefore reflect or influence memory, perception and behaviour.

  15. Scientists' views about attribution of global warming.

    Science.gov (United States)

    Verheggen, Bart; Strengers, Bart; Cook, John; van Dorland, Rob; Vringer, Kees; Peters, Jeroen; Visser, Hans; Meyer, Leo

    2014-08-19

    Results are presented from a survey held among 1868 scientists studying various aspects of climate change, including physical climate, climate impacts, and mitigation. The survey was unique in its size, broadness and level of detail. Consistent with other research, we found that, as the level of expertise in climate science grew, so too did the level of agreement on anthropogenic causation. 90% of respondents with more than 10 climate-related peer-reviewed publications (about half of all respondents), explicitly agreed with anthropogenic greenhouse gases (GHGs) being the dominant driver of recent global warming. The respondents' quantitative estimate of the GHG contribution appeared to strongly depend on their judgment or knowledge of the cooling effect of aerosols. The phrasing of the IPCC attribution statement in its fourth assessment report (AR4)-providing a lower limit for the isolated GHG contribution-may have led to an underestimation of the GHG influence on recent warming. The phrasing was improved in AR5. We also report on the respondents' views on other factors contributing to global warming; of these Land Use and Land Cover Change (LULCC) was considered the most important. Respondents who characterized human influence on climate as insignificant, reported having had the most frequent media coverage regarding their views on climate change.

  16. Female Sex Offenders: Public Awareness and Attributions.

    Science.gov (United States)

    Cain, Calli M; Anderson, Amy L

    2016-12-01

    Traditional gender roles, sex scripts, and the way female sex offenders are portrayed in the media may lead to misconceptions about who can commit sexual offenses. Sexual crimes by women may go unnoticed or unreported if there is a general lack of awareness that females commit these crimes. Data from the 2012 Nebraska Annual Social Indicators Survey were used to determine whether the public perceives women as capable sex offenders and the perceived causes of female sex offending. The traditional focus on male sex offenders by researchers, media, and politicians, in addition to gender stereotypes, introduces the possibility of group differences (e.g., between men and women) in perceptions of female sex offenders. Consequently, two secondary analyses were conducted that tested for group differences in both the public's perception of whether females can commit sex offenses and the explanations selected for why females sexually offend. The findings suggest that the public does perceive women as capable sex offenders, although there were group differences in the causal attributions for female sex offending.

  17. A Seven Nations Study of Leadership Attributes

    Directory of Open Access Journals (Sweden)

    Mączyński Jerzy

    2017-06-01

    Full Text Available The overall purpose of this paper was to compare a representative sample of Polish middle managers with a representative sample of chief executive officers (CEOs from six chosen countries, in regard to selected leadership traits and behaviors. We present a small portion of data collected under the GLOBE project, Phase 3, and longitudinal research findings concerning subordinates′ assessments of Polish middle managers in relation to their attributes from 2008 to 2012. The GLOBE, Phase 3 research is the first study to investigate several thousands of CEOs and senior management teams in 24 countries, to empirically and directly assess the relationship between culture and leadership traits and behaviors. We provide research evidence that the investigated CEOs from the United States, Austria, Germany, China, and Taiwan (with the exception of Russian CEOs and Polish middle managers were generally positively evaluated by their direct staff in regard to: inspirational, visionary, integrity, and performance-oriented leadership behaviors (constituents of charismatic leadership, team-oriented behavior, and participative leadership style. Empirical findings under the GLOBE project, Phase 3 revealed that the charismatic leadership behavior of CEOs has a huge influence on top management teams′ (TMTs dedication to organizational goals, and is the most predictive of all leadership behaviors for TMT commitment to organizations. The analyzed research findings indicate that CEOs in Russia and Polish middle managers display strong similarities. They tend to behave in less charismatic, team-oriented, and participative ways than CEOs in the remaining countries.

  18. ENVIRONMENTAL AND SAFETY ATTRIBUTES GEOSTRATEGIC HEGEMONY

    Directory of Open Access Journals (Sweden)

    A. Bohan

    2014-12-01

    Full Text Available The article deals with modern aspects of manifestation geostrategic hegemony in the context of its environmental and safety attributes that determine the appearance of new determinants of economic development and progress of the world. Specificity of the geopolitical sphere in the context of a retrospective and prospects of development of civilization, which requires the use of new system-methodological approaches to its study. Defined mechanisms to enhance the status of the hegemon, which by their nature are accompanied by threats and challenges of globalization and conflict-military factors in the fight for resources and ecological imbalance in the world. The space competition geopolitical actors are increasingly extended to third countries, thus causing their economic instability, environmental vulnerability and permanent conflict. The factors, causes and conditions for the identification of new measurements geostrategic hegemony, which can affect the configuration of world order, the balance of economic power and the establishment of constructive international dialogue aimed at security, sustainable development and well-being of all mankind.

  19. MELA: Modelling in Ecology with Location Attributes

    Directory of Open Access Journals (Sweden)

    Ludovica Luisa Vissat

    2016-10-01

    Full Text Available Ecology studies the interactions between individuals, species and the environment. The ability to predict the dynamics of ecological systems would support the design and monitoring of control strategies and would help to address pressing global environmental issues. It is also important to plan for efficient use of natural resources and maintenance of critical ecosystem services. The mathematical modelling of ecological systems often includes nontrivial specifications of processes that influence the birth, death, development and movement of individuals in the environment, that take into account both biotic and abiotic interactions. To assist in the specification of such models, we introduce MELA, a process algebra for Modelling in Ecology with Location Attributes. Process algebras allow the modeller to describe concurrent systems in a high-level language. A key feature of concurrent systems is that they are composed of agents that can progress simultaneously but also interact - a good match to ecological systems. MELA aims to provide ecologists with a straightforward yet flexible tool for modelling ecological systems, with particular emphasis on the description of space and the environment. Here we present four example MELA models, illustrating the different spatial arrangements which can be accommodated and demonstrating the use of MELA in epidemiological and predator-prey scenarios.

  20. Amateur boxing: physical and physiological attributes.

    Science.gov (United States)

    Chaabène, Helmi; Tabben, Montassar; Mkaouer, Bessem; Franchini, Emerson; Negra, Yassine; Hammami, Mehrez; Amara, Samiha; Chaabène, Raja Bouguezzi; Hachana, Younés

    2015-03-01

    Boxing is one of the oldest combat sports. The aim of the current review is to critically analyze the amateur boxer's physical and physiological characteristics and to provide practical recommendations for training as well as new areas of scientific research. High-level male and female boxers show a propensity for low body fat levels. Although studies on boxer somatotypes are limited, the available information shows that elite-level male boxers are characterized by a higher proportion of mesomorphy with a well-developed muscle mass and a low body fat level. To help support the overall metabolic demands of a boxing match and to accelerate the recovery process between rounds, athletes of both sexes require a high level of cardiorespiratory fitness. International boxers show a high peak and mean anaerobic power output. Muscle strength in both the upper and lower limbs is paramount for a fighter's victory and is one of the keys to success in boxing. As boxing punches are brief actions and very dynamic, high-level boxing performance requires well-developed muscle power in both the upper and lower limbs. Albeit limited, the available studies reveal that isometric strength is linked to high-level boxing performance. Future investigations into the physical and physiological attributes of boxers are required to enrich the current data set and to help create a suitable training program.

  1. Attribution of mental illness to work: a Delphi study.

    Science.gov (United States)

    Wong, M G P; Poole, C J M; Agius, R

    2015-07-01

    Clinicians may be asked whether mental ill-health has been caused by work but there is no guidance on how this judgement should be made. To seek a consensus on the factors that should be considered and how they should be sought when attributing mental ill-health to work. A three-round Delphi study involving expert academics, occupational physicians, psychiatrists and psychologists. We deemed consensus had been reached when 66% or more of the experts were in agreement. Of 54 invited experts, 35 (65%) took part in the first round, 30 of these 35 (86%) in the second and 29 of these 30 (97%) in the final round. Consensus was reached for 11 workplace stressors: high job strain; effort-reward imbalance; major trauma; interpersonal conflict; inadequate support; role ambiguity; person-job mismatch; organizational injustice; organizational culture; work scheduling and threats to job security. Seven personal factors were identified as being important: previous mental illness; personality traits of neuroticism; adverse life events or social circumstances; resilience; a family history of mental illness and secondary gain. The worker, manager and co-workers were thought to be the most useful sources of workplace information. Consensus was reached for a definition of occupational mental illness but not for a threshold of work-relatedness. The attribution of mental ill-health to work is complex and involves the consideration of both workplace stressors and personal factors of vulnerability. Clinical consultation with an occupational physician who is familiar with the workplace is central to the process. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  2. Identifying critical thinking indicators and critical thinker attributes in nursing practice.

    Science.gov (United States)

    Chao, Shu-Yuan; Liu, Hsing-Yuan; Wu, Ming-Chang; Clark, Mary Jo; Tan, Jung-Ying

    2013-09-01

    Critical thinking is an essential skill in the nursing process. Although several studies have evaluated the critical thinking skills of nurses, there is limited information related to the indicators of critical thinking or evaluation of critical thinking in the context of the nursing process. This study investigated the potential indicators of critical thinking and the attributes of critical thinkers in clinical nursing practice. Knowledge of these indicators can aid the development of tools to assess nursing students' critical thinking skills. The study was conducted between September 2009 and August 2010. In phase 1, a literature review and four focus groups were conducted to identify the indicators of critical thinking in the context of nursing and the attributes of critical thinkers. In phase 2, 30 nursing professionals participated in a modified Delphi research survey to establish consensus and the appropriateness of each indicator and attribute identified in phase 1. We identified 37 indicators of critical thinking and 10 attributes of critical thinkers. The indicators were categorized into five subscales within the context of the nursing process toreflect nursing clinical practice: assessment, 16 indicators of ability to apply professional knowledge and skills to analyze and interpret patient problems; diagnosis, five indicators of ability to propose preliminary suppositions; planning, five indicators of ability to develop problem-solving strategies; implementation, five indicators of ability to implement planning; and evaluation, six indicators of ability to self-assess and reflect. The study operationalized critical thinking into a practical indicator suitable for nursing contexts in which critical thinking is required for clinical problem solving. Identified indicators and attributes can assist clinical instructors to evaluate student critical thought skills and development-related teaching strategies.

  3. An Attributional Analysis of Reactions to Negative Emotions.

    Science.gov (United States)

    Karasawa, Kaori

    1995-01-01

    Three studies examined observers' attributions and reactions to negative emotional displays, as well as expressers' expectations about others' reactions. Analysis revealed that people attribute others' negative emotions equally to situational factors and dispositions, whereas their own emotions are attributed to the situation more than to…

  4. Attributes of ethical employees in Malaysian public sector ...

    African Journals Online (AJOL)

    This study aims to explore the attributes of ethical employees in public sector and to pattern match the attributes with human behavior, social and ethics theories. A qualitative research is used by focusing on first-order attributes (through interviews) and second-order concepts (using theories to explain the facts). This study ...

  5. Multi-Attribute Vickrey Auctions when Utility Functions are Unknown

    NARCIS (Netherlands)

    Máhr, T.; De Weerdt, M.M.

    2006-01-01

    Multi-attribute auctions allow negotiations over multiple attributes besides price. For example in task allocation, service providers can define their service by means of multiple attributes, such as quality of service, deadlines, or delay penalties. Auction mechanisms assume that the players have

  6. Linearly Ordered Attribute Grammar Scheduling Using SAT-Solving

    NARCIS (Netherlands)

    Bransen, Jeroen; van Binsbergen, L.Thomas; Claessen, Koen; Dijkstra, Atze

    2015-01-01

    Many computations over trees can be specified using attribute grammars. Compilers for attribute grammars need to find an evaluation order (or schedule) in order to generate efficient code. For the class of linearly ordered attribute grammars such a schedule can be found statically, but this problem

  7. A Pure Object-Oriented Embedding of Attribute Grammars

    NARCIS (Netherlands)

    Sloane, A.M.; Kats, L.C.L.; Visser, E.

    2010-01-01

    Attribute grammars are a powerful specification paradigm for many language processing tasks, particularly semantic analysis of programming languages. Recent attribute grammar systems use dynamic scheduling algorithms to evaluate attributes by need. In this paper, we show how to remove the need for a

  8. Identity and attribution as lenses to understand the relationship ...

    African Journals Online (AJOL)

    Irrespective of social class, those who attributed academic performance to factors outside their control performed less well. Conclusion. The study suggests that interventions are required that help all students to control their academic performance. Attributional retraining (AR) has the potential to assist students who attribute ...

  9. Development and Validation of the Poverty Attributions Survey

    Science.gov (United States)

    Bennett, Robert M.; Raiz, Lisa; Davis, Tamara S.

    2016-01-01

    This article describes the process of developing and testing the Poverty Attribution Survey (PAS), a measure of poverty attributions. The PAS is theory based and includes original items as well as items from previously tested poverty attribution instruments. The PAS was electronically administered to a sample of state-licensed professional social…

  10. Factors Relating to Staff Attributions of Control over Challenging Behaviour

    Science.gov (United States)

    Dilworth, Jennifer A.; Phillips, Neil; Rose, John

    2011-01-01

    Background: Previous research has suggested that severity of intellectual disability (ID) and topography of behaviour may influence staff causal attributions regarding challenging behaviour. Subsequently, these causal attributions may influence helping behaviours. This study investigated the relationship between attributions of control over…

  11. Fine-Grained Turbidites: Facies, Attributes and Process Implications

    Science.gov (United States)

    Stow, Dorrik; Omoniyi, Bayonle

    2016-04-01

    Within turbidite systems, fine-grained sediments are still the poor relation and sport several contrasting facies models linked to process of deposition. These are volumetrically the dominant facies in deepwater and, from a resource perspective, they form important marginal and tight reservoirs, and have great potential for unconventional shale gas, source rocks and seals. They are also significant hosts of metals and rare earth elements. Based on a large number of studies of modern, ancient and subsurface systems, including 1000s of metres of section logging, we define the principal genetic elements of fine-grained deepwater facies, present a new synthesis of facies models and their sedimentary attributes. The principal architectural elements include: non-channelised slope-aprons, channel-fill, channel levee and overbank, turbidite lobes, mass-transport deposits, contourite drifts, basin sheets and drapes. These comprise a variable intercalation of fine-grained facies - thin-bedded and very thin-bedded turbidites, contourites, hemipelagites and pelagites - and associated coarse-grained facies. Characteristic attributes used to discriminate between these different elements are: facies and facies associations; sand-shale ratio, sand and shale geometry and dimensions, sand connectivity; sediment texture and small-scale sedimentary structures; sediment fabric and microfabric; and small-scale vertical sequences of bed thickness. To some extent, we can relate facies and attribute characteristics to different depositional environments. We identify four distinct facies models: (a) silt-laminated mud turbidites, (b) siliciclastic mud turbidites, (c) carbonate mud turbidites, (d) disorganized silty-mud turbidites, and (e) hemiturbidites. Within the grainsize-velocity matrix turbidite plot, these all fall within the region of mean size < 0.063mm, maximum grainsize (one percentile) <0.2mm, and depositional velocity 0.1-0.5 m/s. Silt-laminated turbidites and many mud

  12. Preliminary rail access study

    International Nuclear Information System (INIS)

    1990-01-01

    The Yucca Mountain site, located on the southwestern edge of the Nevada Test Site, is an undeveloped area under investigation as a potential site for nuclear waste disposal by the US Department of Energy. The site currently lacks rail service and an existing rail right-of-way. If the site is suitable and selected for development as a disposal site, rail service is desirable to the Office of Civilian Radioactive Waste Management Program because of the potential of rail to reduce number of shipments and costs relative to highway transportation. This preliminary report is a summary of progress to date for activities to identify and evaluate potential rail options from major rail carriers in the region to the Yucca Mountain site. It is currently anticipated that the rail spur will be operational after the year 2000. 9 refs., 13 figs., 2 tabs

  13. White paper for the exploitation of the renewable energy sources

    International Nuclear Information System (INIS)

    Barra, L.; Avella, R.; Braccio, G.; Caserta, G.; Chiado' Rana, M.; Ciciolla, C.; Conte, G.; De Lillo, A.; Gerardi, V.; Giuliani, G.; Pignatelli, V.; Pirazzi, L.; Ricci, A.; Sarno, A.; Sonnino, A.; Viggiano, D.; Pazzi, V.; Silvestrini, G.; Morselli, F.; Gomboli, M.

    1998-01-01

    The Italian government attributes at the renewable energy sources a remarkable strategy. Therefore supports the progressive integration of this energy sources in energy market and develop the co-operation with Mediterranean area countries [it

  14. Effect of dietary protein source on piglet meat quality characteristics

    Directory of Open Access Journals (Sweden)

    Panagiotis E Simitzis

    2014-03-01

    Full Text Available An experiment was conducted to examine the effects of different dietary protein sources (soybean meal vs whey protein on piglet meat quality characteristics. Eighteen castrated male Large White × Duroc × Landrace piglets were randomly assigned to 2 groups. Piglets were kept in individual metabolic cages and fed ad libitum over a period of 38 days the following 2 diets: diet SB, which was formulated to meet the nutrient requirements of piglets using soybean meal as the main crude protein source and diet WP, where SB was totally replaced by a mixture of whey proteins on equal digestible energy and crude protein basis. At the end of the experiment, piglets were weighed and slaughtered. After overnight chilling, samples of Longissimus dorsi muscle were taken and were used for meat quality measurements.          No significant differences were observed in the values of pH, colour, water holding capacity, shear force and intramuscular fat content of L. dorsi muscle between the dietary treatments. Measurement of lipid oxidation values showed that dietary supplementation with different protein sources did not influence meat antioxidant properties during refrigerated storage. The SB piglets had lower 14:0 (P<0.01 and higher 18:3n-3 (P<0.001 levels in intramuscular fat in comparison with WP piglets. However, these changes were attributed to background differences in the dietary FA profile and not to a direct protein source effect. The results of this preliminary study indicate that the examined dietary protein sources (soybean meal or whey protein do not have a significant effect on meat quality characteristics of piglets.

  15. [A preliminary research on multi-source medical image fusion].

    Science.gov (United States)

    Kang, Yuanyuan; Li, Bin; Tian, Lianfang; Mao, Zongyuan

    2009-04-01

    Multi-modal medical image fusion has important value in clinical diagnosis and treatment. In this paper, the multi-resolution analysis of Daubechies 9/7 Biorthogonal Wavelet Transform is introduced for anatomical and functional image fusion, then a new fusion algorithm with the combination of local standard deviation and energy as texture measurement is presented. At last, a set of quantitative evaluation criteria is given. Experiments show that both anatomical and metabolism information can be obtained effectively, and both the edge and texture features can be reserved successfully. The presented algorithm is more effective than the traditional algorithms.

  16. Sources of light-absorbing aerosol in arctic snow and their seasonal variation

    Directory of Open Access Journals (Sweden)

    Dean A. Hegg

    2010-11-01

    Full Text Available Two data sets consisting of measurements of light absorbing aerosols (LAA in arctic snow together with suites of other corresponding chemical constituents are presented; the first from Siberia, Greenland and near the North Pole obtained in 2008, and the second from the Canadian arctic obtained in 2009. A preliminary differentiation of the LAA into black carbon (BC and non-BC LAA is done. Source attribution of the light absorbing aerosols was done using a positive matrix factorization (PMF model. Four sources were found for each data set (crop and grass burning, boreal biomass burning, pollution and marine. For both data sets, the crops and grass biomass burning was the main source of both LAA species, suggesting the non-BC LAA was brown carbon. Depth profiles at most of the sites allowed assessment of the seasonal variation in the source strengths. The biomass burning sources dominated in the spring but pollution played a more significant (though rarely dominant role in the fall, winter and, for Greenland, summer. The PMF analysis is consistent with trajectory analysis and satellite fire maps.

  17. Design and preliminary testing of a MEMS microphone phased array for aeroacoustic testing of a small-scale wind turbine airfoil

    Energy Technology Data Exchange (ETDEWEB)

    Bale, A.; Orlando, S.; Johnson, D. [Waterloo Univ., ON (Canada). Wind Energy Group

    2010-07-01

    One of the barriers preventing the widespread utilization of wind turbines is the audible sound that they produce. Developing quieter wind turbines will increase the amount of available land onto which wind farms can be built. Noise emissions from wind turbines can be attributed to the aerodynamic effects between the turbine blades and the air surrounding them. A dominant source of these aeroacoustic emissions from wind turbines is known to originate at the trailing edges of the airfoils. This study investigated the flow physics of noise generation in an effort to reduce noise from small-scale wind turbine airfoils. The trailing edge noise was studied on scale-models in wind tunnels and applied to full scale conditions. Microphone phased arrays are popular research tools in wind tunnel aeroacoustic studies because they can measure and locate noise sources. However, large arrays of microphones can be prohibitively expensive. This paper presented preliminary testing of micro-electrical mechanical system (MEMS) microphones in phased arrays for aeroacoustic testing on a small wind turbine airfoil. Preliminary results showed that MEMS microphones are an acceptable low-cost alternative to costly condenser microphones. 19 refs., 1 tab., 11 figs.

  18. Regularization of Instantaneous Frequency Attribute Computations

    Science.gov (United States)

    Yedlin, M. J.; Margrave, G. F.; Van Vorst, D. G.; Ben Horin, Y.

    2014-12-01

    We compare two different methods of computation of a temporally local frequency:1) A stabilized instantaneous frequency using the theory of the analytic signal.2) A temporally variant centroid (or dominant) frequency estimated from a time-frequency decomposition.The first method derives from Taner et al (1979) as modified by Fomel (2007) and utilizes the derivative of the instantaneous phase of the analytic signal. The second method computes the power centroid (Cohen, 1995) of the time-frequency spectrum, obtained using either the Gabor or Stockwell Transform. Common to both methods is the necessity of division by a diagonal matrix, which requires appropriate regularization.We modify Fomel's (2007) method by explicitly penalizing the roughness of the estimate. Following Farquharson and Oldenburg (2004), we employ both the L curve and GCV methods to obtain the smoothest model that fits the data in the L2 norm.Using synthetic data, quarry blast, earthquakes and the DPRK tests, our results suggest that the optimal method depends on the data. One of the main applications for this work is the discrimination between blast events and earthquakesFomel, Sergey. " Local seismic attributes." , Geophysics, 72.3 (2007): A29-A33.Cohen, Leon. " Time frequency analysis theory and applications." USA: Prentice Hall, (1995).Farquharson, Colin G., and Douglas W. Oldenburg. "A comparison of automatic techniques for estimating the regularization parameter in non-linear inverse problems." Geophysical Journal International 156.3 (2004): 411-425.Taner, M. Turhan, Fulton Koehler, and R. E. Sheriff. " Complex seismic trace analysis." Geophysics, 44.6 (1979): 1041-1063.

  19. Selection of key terrain attributes for SOC model

    DEFF Research Database (Denmark)

    Greve, Mogens Humlekrog; Adhikari, Kabindra; Chellasamy, Menaka

    As an important component of the global carbon pool, soil organic carbon (SOC) plays an important role in the global carbon cycle. SOC pool is the basic information to carry out global warming research, and needs to sustainable use of land resources. Digital terrain attributes are often use...... was selected, total 2,514,820 data mining models were constructed by 71 differences grid from 12m to 2304m and 22 attributes, 21 attributes derived by DTM and the original elevation. Relative importance and usage of each attributes in every model were calculated. Comprehensive impact rates of each attribute...

  20. Improved Conflict Detection for Graph Transformation with Attributes

    Directory of Open Access Journals (Sweden)

    Géza Kulcsár

    2015-04-01

    Full Text Available In graph transformation, a conflict describes a situation where two alternative transformations cannot be arbitrarily serialized. When enriching graphs with attributes, existing conflict detection techniques typically report a conflict whenever at least one of two transformations manipulates a shared attribute. In this paper, we propose an improved, less conservative condition for static conflict detection of graph transformation with attributes by explicitly taking the semantics of the attribute operations into account. The proposed technique is based on symbolic graphs, which extend the traditional notion of graphs by logic formulas used for attribute handling. The approach is proven complete, i.e., any potential conflict is guaranteed to be detected.