WorldWideScience

Sample records for preliminary model analysis

  1. [Tuscan Chronic Care Model: a preliminary analysis].

    Science.gov (United States)

    Barbato, Angelo; Meggiolaro, Angela; Rossi, Luigi; Fioravanti, C; Palermita, F; La Torre, Giuseppe

    2015-01-01

    the aim of this study is to present a preliminary analysis of efficacy and effectiveness of a model of chronically ill care (Chronic Care Model, CCM). the analysis took into account 106 territorial modules, 1016 General Practitioners and 1,228,595 patients. The diagnostic and therapeutic pathways activated (PDTA), involved four chronic conditions, selected according to the prevalence and incidence, in Tuscany Region: Diabetes Mellitus (DM), Heart Failure (SC), Chronic Obstructive Pulmonary Disease (COPD) and stroke. Six epidemiological indicators of process and output were selected, in order to measure the model of care performed, before and after its application: adherence to specific follow-up for each pathology (use of clinical and laboratory indicators), annual average of expenditure per/capita/euro for diagnostic tests, in laboratory and instrumental, average expenditure per/capita/year for specialist visits; hospitalization rate for diseases related to the main pathology, hospitalization rate for long-term complications and rate of access to the emergency department (ED). Data were collected through the database; the differences before and after the intervention and between exposed and unexposed, were analyzed by method "Before-After (Controlled and Uncontrolled) Studies". The impact of the intervention was calculated as DD (difference of the differences). DM management showed an increased adhesion to follow-up (DD: +8.1%), and the use of laboratory diagnostics (DD: +4,9 €/year/pc), less hospitalization for long-term complications and for endocrine related diseases (DD respectively: 5.8/1000 and DD: +1.2/1000), finally a smaller increase of access to PS (DD: -1.6/1000), despite a slight increase of specialistic visits (DD: +0,38 €/year/pc). The management of SC initially showed a rising adherence to follow-up (DD: +2.3%), a decrease of specialist visits (DD:E 1.03 €/year/pc), hospitalization and access to PS for exacerbations (DD: -4.4/1000 and DD: -6

  2. Cognitive Work Analysis: Preliminary Data for a Model of Problem Solving Strategies

    Science.gov (United States)

    Rothmayer, Mark; Blue, Jennifer

    2007-10-01

    Investigations into problem solving strategies are part of the field of physics education research where investigators seek to improve physics instruction by conducting basic research of problem solving abilities among students, differences in knowledge representations between experts and novices, and how to transfer knowledge structures more effectively onto novices. We developed a new conceptual research tool in our laboratory, where we could potentially map the step by step flow of problem solving strategies among experts and novices. This model is derived from the theory of Cognitive Work Analysis, which is grounded in ecological psychology, and as far as we know it has never been applied to a knowledge domain like physics. We collected survey data from 140 undergraduates enrolled in an algebra based introductory physics course at Miami University as part of a larger study aimed to test the validity of the model. Preliminary data will be presented and discussed.

  3. A Preliminary Jupiter Model

    CERN Document Server

    Hubbard, W B

    2016-01-01

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen-helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses, and a hydrogen-helium-rich envelope with...

  4. A Preliminary Jupiter Model

    Science.gov (United States)

    Hubbard, W. B.; Militzer, B.

    2016-03-01

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen-helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses and a hydrogen-helium-rich envelope with approximately three times solar metallicity.

  5. Stochastic index model for intermittent regimes: from preliminary analysis to regionalisation

    Directory of Open Access Journals (Sweden)

    M. Rianna

    2011-04-01

    Full Text Available In small and medium-sized basins or in rivers characterized by intermittent discharges, with low or negligible/null observed values for long periods of the year, the correct representation of the discharge regime is important for issues related to water management and to define the amount and quality of water available for irrigation, domestic and recreational uses. In these cases, only one index as a statistical metric is often not enough; it is thus necessary to introduce Flow Duration Curves (FDC.

    The aim of this study is therefore to combine a stochastic index flow model capable of reproducing the FDC record period of a river, regardless of the persistence and seasonality of the series, with the theory of total probability in order to calculate how often a river is dry.

    The paper draws from preliminary analyses, including a study to estimate the correlation between discharge indicators Q95, Q50 and Q1 (discharges exceeding 95%, 50% or 1% of the time, respectively and some fundamental characteristics of the basin, as well as to identify homogeneous regions in the target area through the study of several geo-morphological features and climatic conditions. The stochastic model was then applied in one of the homogeneous regions that includes intermittent rivers.

    Finally, the model was regionalized by means of regression analysis in order to calculate the FDC for ungauged basins; the reliability of this method was tested using jack-knife validation.

  6. A PRELIMINARY JUPITER MODEL

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, W. B. [Lunar and Planetary Laboratory, The University of Arizona, Tucson, AZ 85721 (United States); Militzer, B. [Department of Earth and Planetary Science, Department of Astronomy, University of California, Berkeley, CA 94720 (United States)

    2016-03-20

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen–helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses and a hydrogen–helium-rich envelope with approximately three times solar metallicity.

  7. SINGLE-SHELL TANK INTEGRITY PROJECT ANALYSIS OF RECORD-PRELIMINARY MODELING PLAN FOR THERMAL AND OPERATING LOADS

    Energy Technology Data Exchange (ETDEWEB)

    RAST RS; RINKER MW; BAPANAALLI SK; DEIBLER JE; GUZMAN-LEONG CE; JOHNSON KI; KARRI NK; PILLI SP; SANBORN SE

    2010-10-22

    This document is a Phase I deliverable for the Single-Shell Tank Analysis of Record effort. This document is not the Analysis of Record. The intent of this document is to guide the Phase II detailed modeling effort. Preliminary finite element models for each of the tank types were developed and different case studies were performed on one or more of these tank types. Case studies evaluated include thermal loading, waste level variation, the sensitivity of boundary effects (soil radial extent), excavation slope or run to rise ratio, soil stratigraphic (property and layer thickness) variation at different farm locations, and concrete material property variation and their degradation under thermal loads. The preliminary analysis document reviews and preliminary modeling analysis results are reported herein. In addition, this report provides recommendations for the next phase of the SST AOR project, SST detailed modeling. Efforts and results discussed in this report do not include seismic modeling as seismic modeling is covered by a separate report. The combined results of both static and seismic models are required to complete this effort. The SST AOR project supports the US Department of Energy's (DOE) Office of River Protection (ORP) mission for obtaining a better understanding of the structural integrity of Hanford's SSTs. The 149 SSTs, with six different geometries, have experienced a range of operating histories which would require a large number of unique analyses to fully characterize their individual structural integrity. Preliminary modeling evaluations were conducted to determine the number of analyses required for adequate bounding of each of the SST tank types in the Detailed Modeling Phase of the SST AOR Project. The preliminary modeling was conducted in conjunction with the Evaluation Criteria report, Johnson et al. (2010). Reviews of existing documents were conducted at the initial stage of preliminary modeling. These reviews guided the topics

  8. Environmental Barrier Coating (EBC) Durability Modeling; An Overview and Preliminary Analysis

    Science.gov (United States)

    Abdul-Aziz, A.; Bhatt, R. T.; Grady, J. E.; Zhu, D.

    2012-01-01

    A study outlining a fracture mechanics based model that is being developed to investigate crack growth and spallation of environmental barrier coating (EBC) under thermal cycling conditions is presented. A description of the current plan and a model to estimate thermal residual stresses in the coating and preliminary fracture mechanics concepts for studying crack growth in the coating are also discussed. A road map for modeling life and durability of the EBC and the results of FEA model(s) developed for predicting thermal residual stresses and the cracking behavior of the coating are generated and described. Further initial assessment and preliminary results showed that developing a comprehensive EBC life prediction model incorporating EBC cracking, degradation and spalling mechanism under stress and temperature gradients typically seen in turbine components is difficult. This is basically due to mismatch in thermal expansion difference between sub-layers of EBC as well as between EBC and substrate, diffusion of moisture and oxygen though the coating, and densification of the coating during operating conditions as well as due to foreign object damage, the EBC can also crack and spall from the substrate causing oxidation and recession and reducing the design life of the EBC coated substrate.

  9. Preliminary reference Earth model

    Science.gov (United States)

    Dziewonski, Adam M.; Anderson, Don L.

    1981-06-01

    A large data set consisting of about 1000 normal mode periods, 500 summary travel time observations, 100 normal mode Q values, mass and moment of inertia have been inverted to obtain the radial distribution of elastic properties, Q values and density in the Earth's interior. The data set was supplemented with a special study of 12 years of ISC phase data which yielded an additional 1.75 × 10 6 travel time observations for P and S waves. In order to obtain satisfactory agreement with the entire data set we were required to take into account anelastic dispersion. The introduction of transverse isotropy into the outer 220 km of the mantle was required in order to satisfy the shorter period fundamental toroidal and spheroidal modes. This anisotropy also improved the fit of the larger data set. The horizontal and vertical velocities in the upper mantle differ by 2-4%, both for P and S waves. The mantle below 220 km is not required to be anisotropic. Mantle Rayleigh waves are surprisingly sensitive to compressional velocity in the upper mantle. High S n velocities, low P n velocities and a pronounced low-velocity zone are features of most global inversion models that are suppressed when anisotropy is allowed for in the inversion. The Preliminary Reference Earth Model, PREM, and auxiliary tables showing fits to the data are presented.

  10. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part of the w......The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  11. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  12. SINGLE-SHELL TANK INTEGRITY PROJECT ANALYSIS OF RECORD-PRELIMINARY MODELING PLAN FOR THERMAL AND OPERATING LOADS

    Energy Technology Data Exchange (ETDEWEB)

    RAST RS; RINKER MW; BAPANAALLI SK; DEIBLER JE; GUZMAN-LEONG CE; JOHNSON KI; KARRI NK; PILLI SP; SANBORN SE

    2010-10-22

    This document is a Phase I deliverable for the Single-Shell Tank Analysis of Record effort. This document is not the Analysis of Record. The intent of this document is to guide the Phase II detailed modeling effort. Preliminary finite element models for each of the tank types were developed and different case studies were performed on one or more of these tank types. Case studies evaluated include thermal loading, waste level variation, the sensitivity of boundary effects (soil radial extent), excavation slope or run to rise ratio, soil stratigraphic (property and layer thickness) variation at different farm locations, and concrete material property variation and their degradation under thermal loads. The preliminary analysis document reviews and preliminary modeling analysis results are reported herein. In addition, this report provides recommendations for the next phase of the SST AOR project, SST detailed modeling. Efforts and results discussed in this report do not include seismic modeling as seismic modeling is covered by a separate report. The combined results of both static and seismic models are required to complete this effort. The SST AOR project supports the US Department of Energy's (DOE) Office of River Protection (ORP) mission for obtaining a better understanding of the structural integrity of Hanford's SSTs. The 149 SSTs, with six different geometries, have experienced a range of operating histories which would require a large number of unique analyses to fully characterize their individual structural integrity. Preliminary modeling evaluations were conducted to determine the number of analyses required for adequate bounding of each of the SST tank types in the Detailed Modeling Phase of the SST AOR Project. The preliminary modeling was conducted in conjunction with the Evaluation Criteria report, Johnson et al. (2010). Reviews of existing documents were conducted at the initial stage of preliminary modeling. These reviews guided the topics

  13. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  14. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  15. Concept Overview & Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, Mark

    2017-07-12

    'H2@Scale' is an opportunity for wide-scale use of hydrogen as an intermediate that carries energy from various production options to multiple uses. It is based on identifying and developing opportunities for low-cost hydrogen production and investigating opportunities for using that hydrogen across the electricity, industrial, and transportation sectors. One of the key production opportunities is use of low-cost electricity that may be generated under high penetrations of variable renewable generators such as wind and solar photovoltaics. The technical potential demand for hydrogen across the sectors is 60 million metric tons per year. The U.S. has sufficient domestic renewable resources so that each could meet that demand and could readily meet the demand using a portfolio of generation options. This presentation provides an overview of the concept and the technical potential demand and resources. It also motivates analysis and research on H2@Scale.

  16. System-Level Heat Transfer Analysis, Thermal- Mechanical Cyclic Stress Analysis, and Environmental Fatigue Modeling of a Two-Loop Pressurized Water Reactor. A Preliminary Study

    Energy Technology Data Exchange (ETDEWEB)

    Mohanty, Subhasish [Argonne National Lab. (ANL), Argonne, IL (United States); Soppet, William [Argonne National Lab. (ANL), Argonne, IL (United States); Majumdar, Saurin [Argonne National Lab. (ANL), Argonne, IL (United States); Natesan, Ken [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-01-03

    This report provides an update on an assessment of environmentally assisted fatigue for light water reactor components under extended service conditions. This report is a deliverable in April 2015 under the work package for environmentally assisted fatigue under DOE's Light Water Reactor Sustainability program. In this report, updates are discussed related to a system level preliminary finite element model of a two-loop pressurized water reactor (PWR). Based on this model, system-level heat transfer analysis and subsequent thermal-mechanical stress analysis were performed for typical design-basis thermal-mechanical fatigue cycles. The in-air fatigue lives of components, such as the hot and cold legs, were estimated on the basis of stress analysis results, ASME in-air fatigue life estimation criteria, and fatigue design curves. Furthermore, environmental correction factors and associated PWR environment fatigue lives for the hot and cold legs were estimated by using estimated stress and strain histories and the approach described in NUREG-6909. The discussed models and results are very preliminary. Further advancement of the discussed model is required for more accurate life prediction of reactor components. This report only presents the work related to finite element modelling activities. However, in between multiple tensile and fatigue tests were conducted. The related experimental results will be presented in the year-end report.

  17. Data analysis for preliminary conceptual model design, Vadose Zone Monitoring System (VZMS), McClellan AFB. 1997 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Zawislanski, P.T.; Oldenburg, C.M.

    1998-01-05

    Vadose zone investigations are being performed at site S-7 in IC 34, at McClellan AFB. At this location, a Vadose Zone Monitoring System (VZMS) is being used to collect subsurface data including hydraulic potential, soil gas pressure, moisture content, water chemistry, gas chemistry, and temperature. Although each individual data set is useful in improving the characterization of this contaminated site, the overall purpose of data collection is to provide input for the conceptual and numerical modeling of VOC transport in the vadose zone and the exchange of contaminants between the vadose zone and groundwater. In this report the authors submit a summary and preliminary analysis of the data collected through the end of 1997 and present it in the context of input for the impending modeling. This report merges findings from both the first and second half of 1997 and is presented as an annual report in lieu of two semi-annual reports, due to the fact that insufficient data had been collected up to mid June to allow a meaningful analysis.

  18. Preliminary Modeling, Testing, and Analysis of a Gas Tankless Water Heater: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Burch, J.; Hoeschele, M.; Springer, D.; Rudd, A.

    2008-05-01

    Today's gas tankless water heaters offer significant energy savings over conventional gas storage tank water heaters, but savings depends on the draw pattern. A one-node model incorporating heat exchanger mass is used to address this and other issues. Key model parameters are determined from least-squares regression on short-term data, including burner efficiency, thermal capacitance, and thermal loss coefficient. The calibrated model agrees with data to ~5% on Qgas, with temperature RMS deviation of ~4..deg..C. Efficiency with a standard realistic draw is 71%, compared to 81% predicted from standard energy-factors. Adding a small tank controlled by the tankless heater solves issues of oscillations with solar pre-heat, low-flow and hot-water-delay issues. Future work includes model refinements and developing optimal data protocols for model parameter extraction.

  19. Preliminary hazards analysis -- vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.

  20. Preliminary analysis of the MER magnetic properties experiment using a computational fluid dynamics model

    DEFF Research Database (Denmark)

    Kinch, K.M.; Merrison, J.P.; Gunnlaugsson, H.P.;

    2006-01-01

    Motivated by questions raised by the magnetic properties experiments on the NASA Mars Pathfinder and Mars Exploration Rover (MER) missions, we have studied in detail the capture of airborne magnetic dust by permanent magnets using a computational fluid dynamics (CFD) model supported by laboratory...

  1. Preliminary analysis of the Jimo coastal ecosystem with the ecopath model

    Science.gov (United States)

    Su, Meng

    2016-12-01

    The Jimo coast encompasses an area of 2157 km2, and the ecosystem is valuable both socially and economically with regional fisheries substantially contributing to the value. A mass-balanced trophic model consisting of 15 functional ecological groups was developed for the coastal ecosystem using the Ecopath model in Ecopath with Ecosim (EwE) software (version 6.4.3). The results of the model simulations indicated that the trophic levels of the functional groups varied between 1.0 and 3.76, and the total production of the system was estimated to be 5112.733 t km-2 yr-1 with a total energy transfer efficiency of 17.6%. The proportion of the total flow originating from detritus was estimated to be 48%, whereas that from primary producers was 52%, indicating that the grazing food chain dominated the energy flow. The ratio of total primary productivity to total respiration in the system was 3.78, and the connectivity index was 0.4. The fin cycling index and the mean path length of the energy flow were 4.92% and 2.57%, respectively, which indicated that the ecosystem exhibits relatively low maturity and stability. The mixed trophic impact (MTI) procedure suggested that the ecological groups at lower trophic levels dominated the feeding dynamics in the Jimo coastal ecosystem. Overfishing is thought to be the primary reason for the degeneration of the Jimo coastal ecosystem, resulting in a decline in the abundance of pelagic and demersal fish species and a subsequent shift to the predominance of lower-trophic-level functional groups. Finally, we offered some recommendations for improving current fishery management practices.

  2. Preliminary Analysis of the Jimo Coastal Ecosystem with the Ecopath Model

    Institute of Scientific and Technical Information of China (English)

    SU Meng

    2016-01-01

    TheJimo coast encompasses an area of 2157km2, and the ecosystem is valuable both socially and economically with regional fisheries substantially contributing to the value. A mass-balanced trophic model consisting of 15 functional ecological groups was developed for the coastal ecosystem using the Ecopath model in Ecopath with Ecosim (EwE) software (version 6.4.3). The results of the model simulations indicated that the trophic levels of the functional groups varied between 1.0 and 3.76, and the total production of the system was estimated to be 5112.733tkm−2yr−1 with a total energy transfer efficiency of 17.6%. The propor-tion of the total flow originating from detritus was estimated to be 48%, whereas that from primary producers was 52%, indicating that the grazing food chain dominated the energy flow. The ratio of total primary productivity to total respiration in the system was 3.78, and the connectivity index was 0.4. The fin cycling index and the mean path length of the energy flow were 4.92% and 2.57%, respectively, which indicated that the ecosystem exhibits relatively low maturity and stability. The mixed trophic impact (MTI) pro-cedure suggested that the ecological groups at lower trophic levels dominated the feeding dynamics in the Jimo coastal ecosystem. Overfishing is thought to be the primary reason for the degeneration of the Jimo coastal ecosystem, resulting in a decline in the abundance of pelagic and demersal fish species and a subsequent shift to the predominance of lower-trophic-level functional groups. Finally, we offered some recommendations for improving current fishery management practices.

  3. Understanding the Health Behaviors of Survivors of Childhood and Young-Adult Cancer: Preliminary Analysis and Model Development

    Directory of Open Access Journals (Sweden)

    Stefanie C. Vuotto

    2015-05-01

    Full Text Available The current study presents preliminary correlational data used to develop a model depicting the psychosocial pathways that lead to the health behaviors of survivors of childhood and young-adult cancer. Data collected from a sample of 18- to 30-year-old cancer survivors (n = 125 was used to examine the relations among interpersonal support and nonsupport, personal agency, avoidance, depressive symptoms and self-efficacy as they related to health behaviors. The outcome measures examined included tobacco and alcohol use, diet, exercise, sunscreen use, medication compliance and follow-up/screening practices. Correlational analyses revealed a number of significant associations among variables. Results are used to inform the development of a health behavior model. Implications for health promotion and survivorship programming are discussed, as well as directions for future research.

  4. Hydrothermal Liquefaction Treatment Preliminary Hazard Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Peter P.; Wagner, Katie A.

    2015-08-31

    A preliminary hazard assessment was completed during February 2015 to evaluate the conceptual design of the modular hydrothermal liquefaction treatment system. The hazard assessment was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. This analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public.

  5. Preliminary results of steel containment vessel model test

    Energy Technology Data Exchange (ETDEWEB)

    Luk, V.K.; Hessheimer, M.F. [Sandia National Labs., Albuquerque, NM (United States); Matsumoto, T.; Komine, K.; Arai, S. [Nuclear Power Engineering Corp., Tokyo (Japan); Costello, J.F. [Nuclear Regulatory Commission, Washington, DC (United States)

    1998-04-01

    A high pressure test of a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of a steel containment vessel (SCV), representing an improved boiling water reactor (BWR) Mark II containment, was conducted on December 11--12, 1996 at Sandia National Laboratories. This paper describes the preliminary results of the high pressure test. In addition, the preliminary post-test measurement data and the preliminary comparison of test data with pretest analysis predictions are also presented.

  6. Evaluation of CO2 migration and formation storage capacity in the Dalders formations, Baltic Sea - Preliminary analysis by means of models of increasing complexity

    Science.gov (United States)

    Niemi, Auli; Yang, Zhibing; Tian, Liang; Jung, Byeongju; Fagerlund, Fritjof; Joodaki, Saba; Pasquali, Riccardo; O'Neill, Nick; Vernon, Richard

    2014-05-01

    We present preliminary data analysis and modeling of CO2 injection into selected parts of the Dalders Monocline and Dalders Structure, formations situated under the Baltic Sea and of potential interest for CO2 geological storage. The approach taken is to use models of increasing complexity successively, thereby increasing the confidence and reliability of the predictions. The objective is to get order-of-magnitude estimates of the behavior of the formations during potential industrial scale CO2 injection and subsequent storage periods. The focus has been in regions with best cap-rock characteristics, according to the present knowledge. Data has been compiled from various sources available, such as boreholes within the region. As the first approximation we use analytical solutions, in order to get an initial estimate the CO2 injection rates that can be used without causing unacceptable pressure increases. These preliminary values are then used as basis for more detailed numerical analyses with TOUGH2/TOUGH2-MP (e.g. Zhang et al, 2008) simulator and vertical equilibrium based (e.g. Gasda et al, 2009) models. With the numerical models the variations in material properties, formation thickness etc., as well as more processes such as CO2 dissolution can also be taken into account. The presentation discusses results from these preliminary analyses in terms of estimated storage capacity, CO2 and pressure plume extent caused by various injection scenarios, as well as CO2 travel time after the end of the injection. The effect of factors such as number of injection wells and the positioning of these, the effect of formation properties and the boundary conditions are discussed as are the benefits and disadvantages of the various modeling approaches used. References: Gasda S.E. et al, 2009. Computational Geosciences 13, 469-481. Zhang et al, 2008. Report LBNL-315E, Lawrence Berkeley National Laboratory.

  7. Modeling method and preliminary model of Asteroid Toutatis from Chang'E-2 optical images

    Science.gov (United States)

    Li, Xiang-Yu; Qiao, Dong

    2014-06-01

    Shape modeling is fundamental to the analysis of dynamic environment and motion around asteroid. Chang'E-2 successfully made a flyby of Asteroid 4179 Toutatis and obtained plenty of high-resolution images during the mission. In this paper, the modeling method and preliminary model of Asteroid Toutatis are discussed. First, the optical images obtained by Chang'E-2 are analyzed. Terrain and silhouette features in images are described. Then, the modeling method based on previous radar model and preliminary information from optical images is proposed. A preliminary polyhedron model of Asteroid Toutatis is established. Finally, the spherical harmonic coefficients of Asteroid Toutatis based on the polyhedron model are obtained. Some parameters of model are analyzed and compared. Although the model proposed in this paper is only a preliminary model, this work offers a valuable reference for future high-resolution models.

  8. Preliminary Work for Modeling the Propellers of an Aircraft as a Noise Source in an Acoustic Boundary Element Analysis

    Science.gov (United States)

    Vlahopoulos, Nickolas; Lyle, Karen H.; Burley, Casey L.

    1998-01-01

    An algorithm for generating appropriate velocity boundary conditions for an acoustic boundary element analysis from the kinematics of an operating propeller is presented. It constitutes the initial phase of Integrating sophisticated rotorcraft models into a conventional boundary element analysis. Currently, the pressure field is computed by a linear approximation. An initial validation of the developed process was performed by comparing numerical results to test data for the external acoustic pressure on the surface of a tilt-rotor aircraft for one flight condition.

  9. Preliminary safety analysis methodology for the SMART

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-03-01

    This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

  10. BASE Flexible Array Preliminary Lithospheric Structure Analysis

    Science.gov (United States)

    Yeck, W. L.; Sheehan, A. F.; Anderson, M. L.; Siddoway, C. S.; Erslev, E.; Harder, S. H.; Miller, K. C.

    2009-12-01

    The Bighorns Arch Seismic Experiment (BASE) is a Flexible Array experiment integrated with EarthScope. The goal of BASE is to develop a better understanding of how basement-involved foreland arches form and what their link is to plate tectonic processes. To achieve this goal, the crustal structure under the Bighorn Mountain range, Bighorn Basin, and Powder River Basin of northern Wyoming and southern Montana are investigated through the deployment of 35 broadband seismometers, 200 short period seismometers, 1600 “Texan” instruments using active sources and 800 “Texan” instruments monitoring passive sources, together with field structural analysis of brittle structures. The novel combination of these approaches and anticipated simultaneous data inversion will give a detailed structural crustal image of the Bighorn region at all levels of the crust. Four models have been proposed for the formation of the Bighorn foreland arch: subhorizontal detachment within the crust, lithospheric buckling, pure shear lithospheric thickening, and fault blocks defined by lithosphere-penetrating thrust faults. During the summer of 2009, we deployed 35 broadband instruments, which have already recorded several magnitude 7+ teleseismic events. Through P wave receiver function analysis of these 35 stations folded in with many EarthScope Transportable Array stations in the region, we present a preliminary map of the Mohorovicic discontinuity. This crustal map is our first test of how the unique Moho geometries predicted by the four hypothesized models of basement involved arches fit seismic observations for the Bighorn Mountains. In addition, shear-wave splitting analysis for our first few recorded teleseisms helps us determine if strong lithospheric deformation is preserved under the range. These analyses help lead us to our final goal, a complete 4D (3D spatial plus temporal) lithospheric-scale model of arch formation which will advance our understanding of the mechanisms

  11. Motion analysis of total cervical disc replacements using computed tomography: Preliminary experience with nine patients and a model

    Energy Technology Data Exchange (ETDEWEB)

    Svedmark, Per (Div. of Orthopedics, Dept. of Molecular Medicine and Surgery, Karolinska Institutet, Stockholm (Sweden); Stockholm Spine Center, Lowenstromska Hospital, Stockholm (Sweden)), email: per.svedmark@spinecenter.se; Lundh, Fredrik; Olivecrona, Henrik (Div. of Orthopedics, Dept. of Molecular Medicine and Surgery, Karolinska Institutet, Stockholm (Sweden)); Nemeth, Gunnar (Capio group, Stockholm (Sweden)); Noz, Marilyn E. (Dept. of Radiology, New York Univ. School of Medicine, New York (United States)); Maguire Jr, Gerald Q. (School of Information and Communication Technology, Royal Inst. of Technology, Kista (Sweden)); Zeleznik, Michael P. (Saya Systems Inc., Salt Lake City (United States))

    2011-12-15

    Background. Cervical total disc replacement (CTDR) is an alternative to anterior fusion. Therefore, it is desirable to have an accurate in vivo measurement of prosthetic kinematics and assessment of implant stability relative to the adjacent vertebrae. Purpose. To devise an in vivo CT-based method to analyze the kinematics of cervical total disc replacements (CTDR), specifically of two prosthetic components between two CT scans obtained under different conditions. Material and Methods. Nine patients with CTDR were scanned in flexion and extension of the cervical spine using a clinical CT scanner with a routine low-dose protocol. The flexion and extension CT volume data were spatially registered, and the prosthetic kinematics of two prosthetic components, an upper and a lower, was calculated and expressed in Euler angles and orthogonal linear translations relative to the upper component. For accuracy analysis, a cervical spine model incorporating the same disc replacement as used in the patients was also scanned and processed in the same manner. Results. Analysis of both the model and patients showed good repeatability, i.e. within 2 standard deviations of the mean using the 95% limits of agreement with no overlapping confidence intervals. The accuracy analysis showed that the median error was close to zero. Conclusion. The mobility of the cervical spine after total disc replacement can be effectively measured in vivo using CT. This method requires an appropriate patient positioning and scan parameters to achieve suitable image quality

  12. Preliminary Analysis of Google+'s Privacy

    OpenAIRE

    2011-01-01

    In this paper we provide a preliminary analysis of Google+ privacy. We identified that Google+ shares photo metadata with users who can access the photograph and discuss its potential impact on privacy. We also identified that Google+ encourages the provision of other names including maiden name, which may help criminals performing identity theft. We show that Facebook lists are a superset of Google+ circles, both functionally and logically, even though Google+ provides a better user interfac...

  13. Simulation modeling and preliminary analysis of TIMS data from the Carlin area and the northern Grapevine Mountains, Nevada

    Science.gov (United States)

    Watson, Ken; Hummer-Miller, Susanne; Kruse, Fred A.

    1986-01-01

    A theoretical radiance model was employed together with laboratory data on a suite of igneous rock to evaluate various algorithms for processing Thermal Infrared Multispectral Scanner (TIMS) data. Two aspects of the general problem were examined: extraction of emissivity information from the observed TIMS radiance data, and how to use emissivity data in a way that is geologically meaningful. The four algorithms were evaluated for appropriate band combinations of TIMS data acquired on both day and night overflights of the Tuscarora Mountains, including the Carlin gold deposit, in north-central Nevada. Analysis of a color composited PC decorrelated image (Bands 3, 4, 5--blue/green/red) of the Northern Grapevine Mountains, Nevada, area showed some useful correlation with the regional geology. The thermal infrared region provides fundamental spectral information that can be used to discriminate the major rock types occurring on the Earth's surface.

  14. A preliminary model of wheelchair service delivery.

    Science.gov (United States)

    Eggers, Sara L; Myaskovsky, Larissa; Burkitt, Kelly H; Tolerico, Michelle; Switzer, Galen E; Fine, Michael J; Boninger, Michael L

    2009-06-01

    To integrate and expand on previously published models of wheelchair service delivery, and provide a preliminary framework for developing more comprehensive, descriptive models of wheelchair service delivery for adults with spinal cord injury within the U.S. health care system. Literature review and a qualitative analysis of in-depth interviews. Not applicable. Ten academic, clinical, regulatory, and industry experts (Department of Veterans Affairs [VA] and non-VA) in wheelchair service delivery. Not applicable. Interviewees were asked to discuss the full range of variables and stakeholders involved in wheelchair service delivery, and to limit their scope to the provision of primary subsequent or replacement chairs (not backup chairs) to adults within the United States. Most experts we interviewed stressed that clients who require a wheelchair play a central role in the wheelchair service delivery process. Providers (including clinicians, rehabilitation engineers, and rehabilitation counselors) are also critical stakeholders. More so than in other health care settings, suppliers play an integral role in the provision of wheelchairs to clients and may significantly influence the appropriateness of the wheelchair provided. Suppliers often have a direct role in wheelchair service delivery through their interactions with the clinician and/or client. This model also identified a number of system-level factors (including facility administration and standards, policies, and regulations) that influence wheelchair service delivery and ultimately the appropriateness of the wheelchair provided. We developed a detailed, descriptive model of wheelchair service delivery that integrates the delivery process and device outcomes, and includes the patient-level, provider-level, and system-level factors that may directly influence those processes and outcomes. We believe that this detailed model can help clinicians and researchers describe and consider the complexities of wheelchair

  15. Analysis of the global free infra-gravity wave climate for the SWOT mission, and preliminary results of numerical modelling

    Science.gov (United States)

    Rawat, A.; Aucan, J.; Ardhuin, F.

    2012-12-01

    All sea level variations of the order of 1 cm at scales under 30 km are of great interest for the future Surface Water Ocean Topography (SWOT) satellite mission. That satellite should provide high-resolution maps of the sea surface height for analysis of meso to sub-mesoscale currents, but that will require a filtering of all gravity wave motions in the data. Free infragravity waves (FIGWs) are generated and radiate offshore when swells and/or wind seas and their associated bound infragravity waves impact exposed coastlines. Free infragravity waves have dominant periods comprised between 1 and 10 minutes and horizontal wavelengths of up to tens of kilometers. Given the length scales of the infragravity waves wavelength and amplitude, the infragravity wave field will can a significant fraction the signal measured by the future SWOT mission. In this study, we analyze the data from recovered bottom pressure recorders of the Deep-ocean Assessment and Reporting of Tsunami (DART) program. This analysis includes data spanning several years between 2006 and 2010, from stations at different latitudes in the North and South Pacific, the North Atlantic, the Gulf of Mexico and the Caribbean Sea. We present and discuss the following conclusions: (1) The amplitude of free infragravity waves can reach several centimeters, higher than the precision sought for the SWOT mission. (2) The free infragravity signal is higher in the Eastern North Pacific than in the Western North Pacific, possibly due to smaller incident swell and seas impacting the nearby coastlines. (3) Free infragravity waves are higher in the North Pacific than in the North Atlantic, possibly owing to different average continental shelves configurations in the two basins. (4) There is a clear seasonal cycle at the high latitudes North Atlantic and Pacific stations that is much less pronounced or absent at the tropical stations, consistent with the generation mechanism of free infragravity waves. Our numerical model

  16. Preliminary Model of Porphyry Copper Deposits

    Science.gov (United States)

    Berger, Byron R.; Ayuso, Robert A.; Wynn, Jeffrey C.; Seal, Robert R., II

    2008-01-01

    The U.S. Geological Survey (USGS) Mineral Resources Program develops mineral-deposit models for application in USGS mineral-resource assessments and other mineral resource-related activities within the USGS as well as for nongovernmental applications. Periodic updates of models are published in order to incorporate new concepts and findings on the occurrence, nature, and origin of specific mineral deposit types. This update is a preliminary model of porphyry copper deposits that begins an update process of porphyry copper models published in USGS Bulletin 1693 in 1986. This update includes a greater variety of deposit attributes than were included in the 1986 model as well as more information about each attribute. It also includes an expanded discussion of geophysical and remote sensing attributes and tools useful in resource evaluations, a summary of current theoretical concepts of porphyry copper deposit genesis, and a summary of the environmental attributes of unmined and mined deposits.

  17. Utility of Social Modeling for Proliferation Assessment - Preliminary Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Coles, Garill A.; Gastelum, Zoe N.; Brothers, Alan J.; Thompson, Sandra E.

    2009-06-01

    This Preliminary Assessment draft report will present the results of a literature search and preliminary assessment of the body of research, analysis methods, models and data deemed to be relevant to the Utility of Social Modeling for Proliferation Assessment research. This report will provide: 1) a description of the problem space and the kinds of information pertinent to the problem space, 2) a discussion of key relevant or representative literature, 3) a discussion of models and modeling approaches judged to be potentially useful to the research, and 4) the next steps of this research that will be pursued based on this preliminary assessment. This draft report represents a technical deliverable for the NA-22 Simulations, Algorithms, and Modeling (SAM) program. Specifically this draft report is the Task 1 deliverable for project PL09-UtilSocial-PD06, Utility of Social Modeling for Proliferation Assessment. This project investigates non-traditional use of social and cultural information to improve nuclear proliferation assessment, including nonproliferation assessment, proliferation resistance assessments, safeguards assessments and other related studies. These assessments often use and create technical information about the State’s posture towards proliferation, the vulnerability of a nuclear energy system to an undesired event, and the effectiveness of safeguards. This project will find and fuse social and technical information by explicitly considering the role of cultural, social and behavioral factors relevant to proliferation. The aim of this research is to describe and demonstrate if and how social science modeling has utility in proliferation assessment.

  18. APT Blanket Safety Analysis: Preliminary Analyses of Downflow Through a Lateral Row 1 Blanket Model Under Near RHR Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Hamm, L.L.

    1998-10-07

    To address a concern about a potential maldistribution of coolant flow through an APT blanket module under low flow near RHR conditions, a scoping study of downflow mixed convection in parallel channels was conducted. Buoyancy will adversely effect the flow distribution in module bins with downflow and non-uniform power distributions. This study consists of two parts: a simple analytical model of flow in a two channel network, and a lumped eleven channel FLOWTRAN-TF model of a front lateral Row-1 blanket module bin. Results from both models indicate that the concern about coolant flow in a vertical model being diverted away from high power regions by buoyancy is warranted. The FLOWTRAN-TF model predicted upflow (i.e., a flow reversal) through several of the high power channels, under some low flow conditions. The transition from the regime with downflow in all channels to a regime with upflow in some channels was abrupt.

  19. Preliminary Hazards Analysis Plasma Hearth Process

    Energy Technology Data Exchange (ETDEWEB)

    Aycock, M.; Coordes, D.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1993-11-01

    This Preliminary Hazards Analysis (PHA) for the Plasma Hearth Process (PHP) follows the requirements of United States Department of Energy (DOE) Order 5480.23 (DOE, 1992a), DOE Order 5480.21 (DOE, 1991d), DOE Order 5480.22 (DOE, 1992c), DOE Order 5481.1B (DOE, 1986), and the guidance provided in DOE Standards DOE-STD-1027-92 (DOE, 1992b). Consideration is given to ft proposed regulations published as 10 CFR 830 (DOE, 1993) and DOE Safety Guide SG 830.110 (DOE, 1992b). The purpose of performing a PRA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PRA then is followed by a Preliminary Safety Analysis Report (PSAR) performed during Title I and II design. This PSAR then leads to performance of the Final Safety Analysis Report performed during construction, testing, and acceptance and completed before routine operation. Radiological assessments indicate that a PHP facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous material assessments indicate that a PHP facility will be a Low Hazard facility having no significant impacts either onsite or offsite to personnel and the environment.

  20. A preliminary Analysis of Dörnyei and Otto’s Process Model of L2 Motivation

    Institute of Scientific and Technical Information of China (English)

    徐佳佳

    2015-01-01

    In the past few decades, motivation has already become a recurring topic in SLA field, where motivational theories have placed great influence on language teaching. Different from previous motivation theories, Dörnyei and Otto’s process model of L2 motivation focuses on the dynamicity of motivation.This paper aims at analyzing the process model of L2 motivation and proposing stimulation strategies for each phase to attain learning effect.

  1. A preliminary Analysis of Drnyei and Otto’s Process Model of L2 Motivation

    Institute of Scientific and Technical Information of China (English)

    徐佳佳

    2015-01-01

    In the past few decades, motivation has already become a recurring topic in SLA field, where motivational theories have placed great influence on language teaching.Different from previous motivation theories, Drnyei and Otto’s process model of L2 motivation focuses on the dynamicity of motivation.This paper aims at analyzing the process model of L2 motivation and proposing stimulation strategies for each phase to attain learning effect.

  2. Observed & Modeled Changes in the Onset of Spring: A Preliminary Comparative Analysis by Geographic Regions of the USA

    Science.gov (United States)

    Enquist, C.

    2012-12-01

    Phenology, the study of seasonal life cycle events in plants and animals, is a well-recognized indicator of climate change impacts on people and nature. Models, experiments, and observational studies show changes in plant and animal phenology as a function of environmental change. Current research aims to improve our understanding of changes by enhancing existing models, analyzing observations, synthesizing previous research, and comparing outputs. Local to regional climatology is a critical driver of phenological variation of organisms across scales. Because plants respond to the cumulative effects of daily weather over an extended period, timing of life cycle events are effective integrators of climate data. One specific measure, leaf emergence, is particularly important because it often shows a strong response to temperature change, and is crucial for assessment of processes related to start and duration of the growing season. Schwartz et al. (2006) developed a suite of models (the "Spring Indices") linking plant development from historical data from leafing and flowering of cloned lilac and honeysuckle with basic climatic drivers to monitor changes related to the start of the spring growing season. These models can be generated at any location that has daily max-min temperature time series. The new version of these models is called the "Extended Spring Indices," or SI-x (Schwartz et al. in press). The SI-x model output (first leaf date and first bloom date) are produced similarly to the original models (SI-o), but do not incorporate accumulated chilling hours; rather energy accumulation starts for all stations on January 1. This change extends the locations SI model output can be generated into the sub-tropics, allowing full coverage of the conterminous USA. Both SI model versions are highly correlated, with mean bias and mean absolute differences around two days or less, and a similar bias and absolute errors when compared to cloned lilac data. To

  3. Repository Subsurface Preliminary Fire Hazard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Richard C. Logan

    2001-07-30

    This fire hazard analysis identifies preliminary design and operations features, fire, and explosion hazards, and provides a reasonable basis to establish the design requirements of fire protection systems during development and emplacement phases of the subsurface repository. This document follows the Technical Work Plan (TWP) (CRWMS M&O 2001c) which was prepared in accordance with AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities''; Attachment 4 of AP-ESH-008, ''Hazards Analysis System''; and AP-3.11Q, ''Technical Reports''. The objective of this report is to establish the requirements that provide for facility nuclear safety and a proper level of personnel safety and property protection from the effects of fire and the adverse effects of fire-extinguishing agents.

  4. Bivariate Left-Censored Bayesian Model for Predicting Exposure: Preliminary Analysis of Worker Exposure during the Deepwater Horizon Oil Spill.

    Science.gov (United States)

    Groth, Caroline; Banerjee, Sudipto; Ramachandran, Gurumurthy; Stenzel, Mark R; Sandler, Dale P; Blair, Aaron; Engel, Lawrence S; Kwok, Richard K; Stewart, Patricia A

    2017-01-01

    In April 2010, the Deepwater Horizon oil rig caught fire and exploded, releasing almost 5 million barrels of oil into the Gulf of Mexico over the ensuing 3 months. Thousands of oil spill workers participated in the spill response and clean-up efforts. The GuLF STUDY being conducted by the National Institute of Environmental Health Sciences is an epidemiological study to investigate potential adverse health effects among these oil spill clean-up workers. Many volatile chemicals were released from the oil into the air, including total hydrocarbons (THC), which is a composite of the volatile components of oil including benzene, toluene, ethylbenzene, xylene, and hexane (BTEXH). Our goal is to estimate exposure levels to these toxic chemicals for groups of oil spill workers in the study (hereafter called exposure groups, EGs) with likely comparable exposure distributions. A large number of air measurements were collected, but many EGs are characterized by datasets with a large percentage of censored measurements (below the analytic methods' limits of detection) and/or a limited number of measurements. We use THC for which there was less censoring to develop predictive linear models for specific BTEXH air exposures with higher degrees of censoring. We present a novel Bayesian hierarchical linear model that allows us to predict, for different EGs simultaneously, exposure levels of a second chemical while accounting for censoring in both THC and the chemical of interest. We illustrate the methodology by estimating exposure levels for several EGs on the Development Driller III, a rig vessel charged with drilling one of the relief wells. The model provided credible estimates in this example for geometric means, arithmetic means, variances, correlations, and regression coefficients for each group. This approach should be considered when estimating exposures in situations when multiple chemicals are correlated and have varying degrees of censoring.

  5. CONTENT ANALYSIS, DISCOURSE ANALYSIS, AND CONVERSATION ANALYSIS: PRELIMINARY STUDY ON CONCEPTUAL AND THEORETICAL METHODOLOGICAL DIFFERENCES

    Directory of Open Access Journals (Sweden)

    Anderson Tiago Peixoto Gonçalves

    2016-08-01

    Full Text Available This theoretical essay aims to reflect on three models of text interpretation used in qualitative research, which is often confused in its concepts and methodologies (Content Analysis, Discourse Analysis, and Conversation Analysis. After the presentation of the concepts, the essay proposes a preliminary discussion on conceptual and theoretical methodological differences perceived between them. A review of the literature was performed to support the conceptual and theoretical methodological discussion. It could be verified that the models have differences related to the type of strategy used in the treatment of texts, the type of approach, and the appropriate theoretical position.

  6. Modeling Malaysia's Energy System: Some Preliminary Results

    Directory of Open Access Journals (Sweden)

    Ahmad M. Yusof

    2011-01-01

    Full Text Available Problem statement: The current dynamic and fragile world energy environment necessitates the development of new energy model that solely caters to analyze Malaysia’s energy scenarios. Approach: The model is a network flow model that traces the flow of energy carriers from its sources (import and mining through some conversion and transformation processes for the production of energy products to final destinations (energy demand sectors. The integration to the economic sectors is done exogeneously by specifying the annual sectoral energy demand levels. The model in turn optimizes the energy variables for a specified objective function to meet those demands. Results: By minimizing the inter temporal petroleum product imports for the crude oil system the annual extraction level of Tapis blend is projected at 579600 barrels per day. The aggregate demand for petroleum products is projected to grow at 2.1% year-1 while motor gasoline and diesel constitute 42 and 38% of the petroleum products demands mix respectively over the 5 year planning period. Petroleum products import is expected to grow at 6.0% year-1. Conclusion: The preliminary results indicate that the model performs as expected. Thus other types of energy carriers such as natural gas, coal and biomass will be added to the energy system for the overall development of Malaysia energy model.

  7. Exploring the longitudinal offending pathways of child sexual abuse victims: A preliminary analysis using latent variable modeling.

    Science.gov (United States)

    Papalia, Nina L; Luebbers, Stefan; Ogloff, James R P; Cutajar, Margaret; Mullen, Paul E

    2017-01-16

    Very little research has been conducted to show the way in which criminal behavior unfolds over the life-course in children who have been sexually abused, and whether it differs from the 'age-crime' patterns consistently documented in the criminology literature. This study investigated the temporal pathways of criminal offending between the ages of 10-25 years among medically confirmed cases of child sexual abuse (CSA), and considered whether abuse variables, offense variables, and the presence of other adverse outcomes, were associated with heterogeneity in offending pathways among CSA survivors. This study utilized data gathered as part of a large-scale study involving the linkage of forensic examinations on 2759 cases of medically ascertained CSA between 1964 and 1995, to criminal justice and public psychiatric databases 13-44 years following abuse, together with a matched comparison sample of 2677 individuals. We used the subsample of 283 offending individuals (191 victims; 92 comparisons) for whom complete offending data were available. We compared the aggregate age-crime curves for CSA victims and comparisons, and applied longitudinal latent class analysis to identify distinct subgroups of offending pathways between ages 10-25 years within the abuse sample. Four latent pathways emerged among sexually abused offenders, labeled: Early-Onset/High-Risk/Adolescence-Limited; Intermediate-Onset/Low-Risk/Adolescence-Limited; Late-Onset/Low-Risk/Slow-Declining; and Early-Onset/High-Risk/Persistent offenders. Age at abuse, the nature and frequency of offending, and mental health problems, were associated with the offending pathway followed by CSA victims. Consistent with criminological literature, findings indicate considerable heterogeneity in the longitudinal offending patterns of offenders exposed to CSA. Implications for clinical practice and directions for research are highlighted.

  8. NRT Rotor Structural / Aeroelastic Analysis for the Preliminary Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Ennis, Brandon Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Paquette, Joshua A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    This document describes the initial structural design for the National Rotor Testbed blade as presented during the preliminary design review at Sandia National Laboratories on October 28- 29, 2015. The document summarizes the structural and aeroelastic requirements placed on the NRT rotor for satisfactory deployment at the DOE/SNL SWiFT experimental facility to produce high-quality datasets for wind turbine model validation. The method and result of the NRT blade structural optimization is also presented within this report, along with analysis of its satisfaction of the design requirements.

  9. Dissolved oxygen analysis, TMDL model comparison, and particulate matter shunting—Preliminary results from three model scenarios for the Klamath River upstream of Keno Dam, Oregon

    Science.gov (United States)

    Sullivan, Annett B.; Rounds, Stewart A.; Deas, Michael L.; Sogutlugil, I. Ertugrul

    2012-01-01

    Efforts are underway to identify actions that would improve water quality in the Link River to Keno Dam reach of the Upper Klamath River in south-central Oregon. To provide further insight into water-quality improvement options, three scenarios were developed, run, and analyzed using previously calibrated CE-QUAL-W2 hydrodynamic and water-quality models. Additional scenarios are under development as part of this ongoing study. Most of these scenarios evaluate changes relative to a "current conditions" model, but in some cases a "natural conditions" model was used that simulated the reach without the effect of point and nonpoint sources and set Upper Klamath Lake at its Total Maximum Daily Load (TMDL) targets. These scenarios were simulated using a model developed by the U.S. Geological Survey (USGS) and Watercourse Engineering, Inc. for the years 2006–09, referred to here as the "USGS model." Another model of the reach was developed by Tetra Tech, Inc. for years 2000 and 2002 to support the Klamath River TMDL process; that model is referred to here as the "TMDL model." The three scenarios described in this report included (1) an analysis of whether this reach of the Upper Klamath River would be in compliance with dissolved oxygen standards if sources met TMDL allocations, (2) an application of more recent datasets to the TMDL model with comparison to results from the USGS model, and (3) an examination of the effect on dissolved oxygen in the Klamath River if particulate material were stopped from entering Klamath Project diversion canals. Updates and modifications to the USGS model are in progress, so in the future these scenarios will be reanalyzed with the updated model and the interim results presented here will be superseded. Significant findings from this phase of the investigation include: * The TMDL analysis used depth-averaged dissolved oxygen concentrations from model output for comparison with dissolved oxygen standards. The Oregon dissolved oxygen

  10. Preliminary Phase Field Computational Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yulan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hu, Shenyang Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xu, Ke [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suter, Jonathan D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McCloy, John S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Bradley R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-12-15

    experiments, special experimental methods were devised to create similar boundary conditions in the iron films. Preliminary MFM studies conducted on single and polycrystalline iron films with small sub-areas created with focused ion beam have correlated quite well qualitatively with phase-field simulations. However, phase-field model dimensions are still small relative to experiments thus far. We are in the process of increasing the size of the models and decreasing specimen size so both have identical dimensions. Ongoing research is focused on validation of the phase-field model. Validation is being accomplished through comparison with experimentally obtained MFM images (in progress), and planned measurements of major hysteresis loops and first order reversal curves. Extrapolation of simulation sizes to represent a more stochastic bulk-like system will require sampling of various simulations (i.e., with single non-magnetic defect, single magnetic defect, single grain boundary, single dislocation, etc.) with distributions of input parameters. These outputs can then be compared to laboratory magnetic measurements and ultimately to simulate magnetic Barkhausen noise signals.

  11. Mathematical modeling of normal pharyngeal bolus transport: a preliminary study.

    Science.gov (United States)

    Chang, M W; Rosendall, B; Finlayson, B A

    1998-07-01

    Dysphagia (difficulty in swallowing) is a common clinical symptom associated with many diseases, such as stroke, multiple sclerosis, neuromuscular diseases, and cancer. Its complications include choking, aspiration, malnutrition, cachexia, and dehydration. The goal in dysphagia management is to provide adequate nutrition and hydration while minimizing the risk of choking and aspiration. It is important to advance the individual toward oral feeding in a timely manner to enhance the recovery of swallowing function and preserve the quality of life. Current clinical assessments of dysphagia are limited in providing adequate guidelines for oral feeding. Mathematical modeling of the fluid dynamics of pharyngeal bolus transport provides a unique opportunity for studying the physiology and pathophysiology of swallowing. Finite element analysis (FEA) is a special case of computational fluid dynamics (CFD). In CFD, the flow of a fluid in a space is modeled by covering the space with a grid and predicting how the fluid moves from grid point to grid point. FEA is capable of solving problems with complex geometries and free surfaces. A preliminary pharyngeal model has been constructed using FEA. This model incorporates literature-reported, normal, anatomical data with time-dependent pharyngeal/upper esophageal sphincter (UES) wall motion obtained from videofluorography (VFG). This time-dependent wall motion can be implemented as a moving boundary condition in the model. Clinical kinematic data can be digitized from VFG studies to construct and test the mathematical model. The preliminary model demonstrates the feasibility of modeling pharyngeal bolus transport, which, to our knowledge, has not been attempted before. This model also addresses the need and the potential for CFD in understanding the physiology and pathophysiology of the pharyngeal phase of swallowing. Improvements of the model are underway. Combining the model with individualized clinical data should potentially

  12. Dual-fuel, dual-throat engine preliminary analysis

    Science.gov (United States)

    Obrien, C. J.

    1979-01-01

    A propulsion system analysis of the dual fuel, dual throat engine for launch vehicle applications was conducted. Basic dual throat engine characterization data were obtained to allow vehicle optimization studies to be conducted. A preliminary baseline engine system was defined.

  13. Preliminary analysis of turbochargers rotors dynamic behaviour

    Science.gov (United States)

    Monoranu, R.; Ştirbu, C.; Bujoreanu, C.

    2016-08-01

    Turbocharger rotors for the spark and compression ignition engines are resistant steels manufactured in order to support the exhaust gas temperatures exceeding 1200 K. In fact, the mechanical stress is not large as the power consumption of these systems is up to 10 kW, but the operating speeds are high, ranging between 30000 ÷ 250000 rpm. Therefore, the correct turbochargers functioning involves, even from the design stage, the accurate evaluation of the temperature effects, of the turbine torque due to the engine exhaust gases and of the vibration system behaviour caused by very high operating speeds. In addition, the turbocharger lubrication complicates the model, because the classical hydrodynamic theory cannot be applied to evaluate the floating bush bearings. The paper proposes a FEM study using CATIA environment, both as modeling medium and as tool for the numerical analysis, in order to highlight the turbocharger complex behaviour. An accurate design may prevent some major issues which can occur during its operation.

  14. Preliminary Study of Jerome Model and Horace Model

    Institute of Scientific and Technical Information of China (English)

    周静; 蒋秀丽

    2013-01-01

    Translation always plays the crucial role in the cross-culture communication and the development of human being’s history of civilization. The author of this papertries to make an analysis and contrast of the two translation models: the Jerome model and the Horace model, pointing out that it is because of different circumstances that different translation models are used in the translation.

  15. Comparative analysis between thoracic spinal cord and sacral neuromodulation in a rat spinal cord injury model: a preliminary report of a rat spinal cord stimulation model.

    Science.gov (United States)

    Hyun, Seung-Jae; Lee, Chang-Hyun; Kwon, Ji Woong; Yoon, Cheol-Yong; Lim, Jae-Young; Kim, Ki-Jeong; Jahng, Tae-Ahn; Kim, Hyun-Jib

    2013-03-01

    The purpose of this study is to compare a neuroprotective effect of thoracic cord neuromodulation to that of sacral nerve neuromodulation in rat thoracic spinal cord injury (SCI) model. Twenty female Sprague Dawley rats were randomly divided into 4 groups: the normal control group (n=5), SCI with sham stimulation group (SCI, n=5), SCI with electrical stimulation at thoracic spinal cord (SCI + TES, n=5), and SCI with electrical stimulation at sacral nerve (SCI + SES, n=5). Spinal cord was injured by an impactor which dropped from 25mm height. Electrical stimulation was performed by the following protocol: pulse duration, 0.1ms; frequency, 20 Hz; stimulation time, 30 minutes; and stimulation duration at thoracic epidural space and S2 or 3 neural foramina for 4 weeks. Locomotor function, urodynamic study, muscle weights, and fiber cross sectional area (CSA) were investigated. All rats of the SCI + TES group expired within 3 days after the injury. The locomotor function of all survived rats improved over time but there was no significant difference between the SCI and the SCI + SES group. All rats experienced urinary retention after the injury and recovered self-voiding after 3-9 days. Voiding contraction interval was 25.5±7.5 minutes in the SCI group, 16.5±5.3 minutes in the SCI+SES group, and 12.5±4.2 minutes in the control group. The recovery of voiding contraction interval was significant in the SCI + SES group comparing to the SCI group (pspinal cord stimulation model. However, sacral neuromodulation have a therapeutic potential to improve neurogenic bladder and muscle atrophy.

  16. Establishment of an animal model of a pasteurized bone graft, with a preliminary analysis of muscle coverage or FGF-2 administration to the graft

    Directory of Open Access Journals (Sweden)

    Nakayama Koichi

    2009-08-01

    Full Text Available Abstract Background Pasteurized bone grafting is used following the excision of a bone tumor for the purpose of eliminating neoplastic cells while preserving bone-inducing ability. In the hopes of guaranteeing the most favourable results, the establishment of an animal model has been urgently awaited. In the course of establishing such a model, we made a preliminary examination of the effect of muscle coverage or fibroblast growth factor 2 (FGF-2 administration radiographically. Methods Forty pasteurized intercalary bone grafts of the Wistar rat femur treated at 60°C for 30 min were reimplanted and stabilized with an intramedullary nail (1.1 mm in diameter. Some grafts were not covered by muscle after the implantation, so that they could act as a clinical model for wide resection, and/or these were soaked with FGF-2 solution prior to implantation. The grafts were then divided into 3 groups, comprising 12 grafts with muscle-covering but without FGF-2 (MC+; FGF2-, 12 grafts without muscle-covering and without FGF-2 (MC-; FGF2- and 16 grafts without muscle covering but with FGF-2 (MC-; FGF2+. Results At 2 weeks after grafting, the pasteurized bone model seemed to be successful in terms of eliminating living cells, including osteocytes. At 4 weeks after grafting, partial bone incorporation was observed in half the (MC+; FGF2- cases and in half the (MC-; FGF2+ cases, but not in any of the (MC-; FGF2- cases. At 12 weeks after grafting, bone incorporation was seen in 3 out of 4 in the (MC+; FGF2- group (3/4: 75% and in 3 out of 8 in the (MC-; FGF2+ group (3/8: 38%. However, most of the grafted bones without FGF-2 were absorbed in all the cases, massively, regardless of whether there had been muscle-covering (MC+; FGF2-; 4/4: 100% or no muscle-covering (MC-; FGF2-; 4/4: 100%, while bone absorption was noted at a lower frequency (2/8: 25% and to a lower degree in the (MC-; FGF2+ group. Conclusion In conclusion, we have established an animal pasteurized

  17. Outline and Preliminary Evaluation of the Classical Digital Library Model.

    Science.gov (United States)

    MacCall, Steven L.; Cleveland, Ana D.; Gibson, Ian E.

    1999-01-01

    Outlines the classical digital library model, which is derived from traditional practices of library and information science professionals, as an alternative to the database retrieval model. Reports preliminary results from an evaluation study of library and information professionals and endusers involved with primary care medicine. (AEF)

  18. A preliminary model of the coma of 2060 Chiron

    Science.gov (United States)

    Boice, Daniel C.; Konno, I.; Stern, S. Alan; Huebner, Walter F.

    1992-01-01

    We have included gravity in our fluid dynamic model with chemical kinetics of dusty comet comae and applied it with two dust sizes to 2060 Chiron. A progress report on the model and preliminary results concerning gas/dust dynamics and chemistry is given.

  19. GPS observations of coseismic deformation following the May 20 and 29, 2012, Emilia seismic events (northern Italy: data, analysis and preliminary models

    Directory of Open Access Journals (Sweden)

    Enrico Serpelloni

    2012-10-01

    Full Text Available In May-July 2012, a seismic sequence struck a broad area of the Po Plain Region in northern Italy. The sequence included two Ml >5.5 mainshocks. The first one (Ml 5.9 occurred near the city of Finale Emilia (ca. 30 km west of Ferrara on May 20 at 02:03:53 (UTC, and the second (Ml 5.8 occurred on May 29 at 7:00:03 (UTC, about 12 km southwest of the May 20 mainshock (Figure 1, near the city of Mirandola. The seismic sequence involved an area that extended in an E-W direction for more than 50 km, and included seven Ml ≥5.0 events and more than 2,300 Ml >1.5 events (http://iside.rm.ingv.it. The focal mechanisms of the main events [Pondrelli et al. 2012, Scognamiglio et al. 2012, this volume] consistently showed compressional kinematics with E-W oriented reverse nodal planes. This sector of the Po Plain is known as a region characterized by slow deformation rates due to the northwards motion of the northern Apennines fold-and-thrust belt, which is buried beneath the sedimentary cover of the Po Plain [Picotti and Pazzaglia 2008, Toscani et al. 2009]. Early global positioning system (GPS measurements [Serpelloni et al. 2006] and the most recent updates [Devoti et al. 2011, Bennett et al. 2012] recognized that less than 2 mm/yr of SW-NE shortening are accommodated across this sector of the Po Plain, in agreement with other present-day stress indicators [Montone et al. 2012] and known active faults [Basili et al. 2008]. In the present study, we describe the GPS data used to study the coseismic deformation related to the May 20 and 29 mainshocks, and provide preliminary models of the two seismic sources, as inverted from consensus GPS coseismic deformation fields. […

  20. A Preliminary Model of Infrared Image Generation for Exhaust Plume

    Directory of Open Access Journals (Sweden)

    Fei Mei

    2011-06-01

    Full Text Available Based on the irradiance calculation of all pixels on the focal plane array, a preliminary infrared imaging prediction model of exhaust plume that have considered the geometrical and the thermal resolution of the camera was developed to understanding the infrared characteristics of exhaust plume. In order to compute the irradiance incident on each pixel, the gas radiation transfer path in the plume for the instantaneous field of view corresponds to the pixel was solved by the simultaneous equation of a enclosure cylinder which covers the exhaust plume and the line of sight. Radiance of the transfer path was calculated by radiation transfer equation for nonscattering gas. The radiative properties of combustion needed in the equation was provided by employing Malkmus model with EM2C narrow band database(25cm-1. The pressure, species concentration along the path was determination by CFD analysis. The relative irradiance intensity of each pixel was converted to color in the display according to gray map coding and hot map coding. Infrared image of the exhaust plumes from a subsonic axisymmetric nozzle with different relative position of camera and the plume was predicted with the model. By changing the parameters, such as FOV and space resolution, the image of different imaging system can be predicted.

  1. Preliminary safety design analysis of KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Soo Dong; Kwon, Y. M.; Kim, K. D. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-03-01

    The national long-term R and D program updated in 1997 requires Korea Atomic Energy Research Institute(KAERI) to complete by the year 2006 the basic design of Korea Advanced Liquid Metal Reactor (KALIMER), along with supporting R and D work, with the capability of resolving the issue of spent fuel storage as well as with significantly enhanced safety. KALIMER is a 150 MWe pool-type sodium cooled prototype reactor that uses metallic fuel. The conceptual design is currently under way to establish a self consistent design meeting a set of the major safety design requirements for accident prevention. Some of current emphasis include those for inherent and passive means of negative reactivity insertion and decay heat removal, high shutdown reliability, prevention of and protection from sodium chemical reaction, and high seismic margin, among others. All of these requirements affect the reactor design significantly and involve supporting R and D programs of substance. This document first introduces a set of safety design requirements and accident evaluation criteria established for the conceptual design of KALIMER and then summarizes some of the preliminary results of engineering and design analyses performed for the safety of KALIMER. 19 refs., 19 figs., 6 tabs. (Author)

  2. Preliminary Multivariable Cost Model for Space Telescopes

    Science.gov (United States)

    Stahl, H. Philip

    2010-01-01

    Parametric cost models are routinely used to plan missions, compare concepts and justify technology investments. Previously, the authors published two single variable cost models based on 19 flight missions. The current paper presents the development of a multi-variable space telescopes cost model. The validity of previously published models are tested. Cost estimating relationships which are and are not significant cost drivers are identified. And, interrelationships between variables are explored

  3. Preliminary analysis of patent trends for magnetic fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, L.O.; Ashton, W.B.; Campbell, R.S.

    1984-02-01

    This study presents a preliminary analysis of development trends in magnetic fusion technology based on data from US patents. The research is limited to identification and description of general patent activity and ownership characteristics for 373 patents. The results suggest that more detailed studies of fusion patents could provide useful R and D planning information.

  4. Preliminary analysis of alternative fuel cycles for proliferation evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Steindler, M. J.; Ripfel, H. C.F.; Rainey, R. H.

    1977-01-01

    The ERDA Division of Nuclear Research and Applications proposed 67 nuclear fuel cycles for assessment as to their nonproliferation potential. The object of the assessment was to determine which fuel cycles pose inherently low risk for nuclear weapon proliferation while retaining the major benefits of nuclear energy. This report is a preliminary analysis of these fuel cycles to develop the fuel-recycle data that will complement reactor data, environmental data, and political considerations, which must be included in the overall evaluation. This report presents the preliminary evaluations from ANL, HEDL, ORNL, and SRL and is the basis for a continuing in-depth study. (DLC)

  5. Modeling Malaysia's Energy System: Some Preliminary Results

    OpenAIRE

    Ahmad M. Yusof

    2011-01-01

    Problem statement: The current dynamic and fragile world energy environment necessitates the development of new energy model that solely caters to analyze Malaysias energy scenarios. Approach: The model is a network flow model that traces the flow of energy carriers from its sources (import and mining) through some conversion and transformation processes for the production of energy products to final destinations (energy demand sectors). The integration to the economic sectors is done exogene...

  6. Preliminary Integrated Safety Analysis Status Report

    Energy Technology Data Exchange (ETDEWEB)

    D. Gwyn

    2001-04-01

    This report provides the status of the potential Monitored Geologic Repository (MGR) Integrated Safety Analysis (EA) by identifying the initial work scope scheduled for completion during the ISA development period, the schedules associated with the tasks identified, safety analysis issues encountered, and a summary of accomplishments during the reporting period. This status covers the period from October 1, 2000 through March 30, 2001.

  7. A preliminary deposit model for lithium brines

    Science.gov (United States)

    Bradley, Dwight; Munk, LeeAnn; Jochens, Hillary; Hynek, Scott; Labay, Keith A.

    2013-01-01

    This report is part of an effort by the U.S. Geological Survey to update existing mineral deposit models and to develop new ones. The global transition away from hydrocarbons toward energy alternatives increases demand for many scarce metals. Among these is lithium, a key component of lithium-ion batteries for electric and hybrid vehicles. Lithium brine deposits account for about three-fourths of the world’s lithium production. Updating an earlier deposit model, we emphasize geologic information that might directly or indirectly help in exploration for lithium brine deposits, or for assessing regions for mineral resource potential. Special attention is given to the best-known deposit in the world—Clayton Valley, Nevada, and to the giant Salar de Atacama, Chile.

  8. Fort Drum Preliminary Fiscal Impact Analysis.

    Science.gov (United States)

    1986-02-01

    of inmigrants 0 Fiscal histories, projections, and impacts for counties, cities, towns, villages, school districts, and the state. The results of...distribution of the inmigrating population within the three counties. Thus, an accurate forecast of the expected distribution of the inmigrating population is a...The distribution of inmigration to the school districts was made using the analysis explained in Chapter 3. Children associated with 800 new on-post

  9. Preliminary Model of Acute Mountain Sickness Severity

    Science.gov (United States)

    2010-10-01

    variance, the Akaike information criterion (AIC) and Bayesian information criterion (BIC) were utilized in selecting the final model using the... information and completed an Environmental Symptoms Questionnaire (ESQ). The ESQ assessed AMS severity using the validated AMS-Cerebral (AMS-C) factor...reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching

  10. Tidal Response of Preliminary Jupiter Model

    OpenAIRE

    Wahl, Sean M; Hubbard, Willam B.; Militzer, Burkhard

    2016-01-01

    In anticipation of improved observational data for Jupiter's gravitational field from the Juno spacecraft, we predict the static tidal response for a variety of Jupiter interior models based on ab initio computer simulations of hydrogen-helium mixtures. We calculate hydrostatic-equilibrium gravity terms using the non-perturbative concentric Maclaurin Spheroid (CMS) method that eliminates lengthy expansions used in the theory of figures. Our method captures terms arising from the coupled tidal...

  11. Tidal Response of Preliminary Jupiter Model

    Science.gov (United States)

    Wahl, Sean M.; Hubbard, William B.; Militzer, Burkhard

    2016-11-01

    In anticipation of improved observational data for Jupiter’s gravitational field, from the Juno spacecraft, we predict the static tidal response for a variety of Jupiter interior models based on ab initio computer simulations of hydrogen-helium mixtures. We calculate hydrostatic-equilibrium gravity terms, using the non-perturbative concentric Maclaurin Spheroid method that eliminates lengthy expansions used in the theory of figures. Our method captures terms arising from the coupled tidal and rotational perturbations, which we find to be important for a rapidly rotating planet like Jupiter. Our predicted static tidal Love number, {k}2=0.5900, is ˜10% larger than previous estimates. The value is, as expected, highly correlated with the zonal harmonic coefficient J 2, and is thus nearly constant when plausible changes are made to the interior structure while holding J 2 fixed at the observed value. We note that the predicted static k 2 might change, due to Jupiter’s dynamical response to the Galilean moons, and find reasons to argue that the change may be detectable—although we do not present here a theory of dynamical tides for highly oblate Jovian planets. An accurate model of Jupiter’s tidal response will be essential for interpreting Juno observations and identifying tidal signals from effects of other interior dynamics of Jupiter’s gravitational field.

  12. Modeling and Testing of EVs - Preliminary Study and Laboratory Development

    DEFF Research Database (Denmark)

    Yang, Guang-Ya; Marra, Francesco; Nielsen, Arne Hejde

    2010-01-01

    impact at different geographical areas, as well as driving and charging patterns. Electric circuit model is deployed in this work to represent the electrical properties of a lithium-ion battery. This paper reports the preliminary modeling and validation work based on manufacturer data sheet and realistic......Electric vehicles (EVs) are expected to play a key role in the future energy management system to stabilize both supply and consumption with the presence of high penetration of renewable generation. A reasonably accurate model of battery is a key element for the study of EVs behavior and the grid...... tests, followed by the suggestions towards a feasible battery model for further studies....

  13. Finite element modelling of the tricuspid valve: A preliminary study.

    Science.gov (United States)

    Stevanella, Marco; Votta, Emiliano; Lemma, Massimo; Antona, Carlo; Redaelli, Alberto

    2010-12-01

    The incomplete efficacy of current surgical repair procedures of the tricuspid valve (TV) demands a deeper comprehension of the physiological TV biomechanics. To this purpose, computational models can provide quantitative insight into TV biomechanical response and allow analysing the role of each TV substructure. We present here a three-dimensional finite element model of the tricuspid valve that takes into account most of its peculiar features. Experimental measurements were performed on human and porcine valves to obtain a more detailed TV anatomical framework. To overcome the complete lack of information on leaflets mechanical properties, we performed a sensitivity analysis on the parameters of the adopted non-linear hyperelastic constitutive model, hypothesizing three different parameter sets for three significant collagen fibre distributions. Results showed that leaflets' motion and maximum principal stress distribution were almost insensitive to the different material parameters considered. Highest stresses (about 100kPa) were located near the annulus of the anterior and septal leaflets, while the posterior leaflet experienced lower stresses (about 55kPa); stresses at the commissures were nearly zero. Conversely, changes in constitutive parameters deeply affected leaflets' strains magnitude, but not their overall pattern. Strains computed assuming that TV leaflets tissue are reinforced by a sparse and loosely arranged network of collagen fibres fitted best experimental data, thus suggesting that this may be the actual microstructure of TV leaflets. In a long-term perspective, this preliminary study aims at providing a starting point for the development of a predictive tool to quantitatively evaluate TV diseases and surgical repair procedures.

  14. Tidal Response of Preliminary Jupiter Model

    CERN Document Server

    Wahl, Sean M; Militzer, Burkhard

    2016-01-01

    In anticipation of improved observational data for Jupiter's gravitational field from the Juno spacecraft, we predict the static tidal response for a variety of Jupiter interior models based on ab initio computer simulations of hydrogen-helium mixtures. We calculate hydrostatic-equilibrium gravity terms using the non-perturbative concentric Maclaurin Spheroid (CMS) method that eliminates lengthy expansions used in the theory of figures. Our method captures terms arising from the coupled tidal and rotational perturbations, which we find to be important for a rapidly-rotating planet like Jupiter. Our predicted static tidal Love number $k_2 = 0.5900$ is $\\sim$10\\% larger than previous estimates. The value is, as expected, highly correlated with the zonal harmonic coefficient $J_2$, and is thus nearly constant when plausible changes are made to interior structure while holding $J_2$ fixed at the observed value. We note that the predicted static $k_2$ might change due to Jupiter's dynamical response to the Galilea...

  15. Preliminary Analysis of Helicopter Options to Support Tunisian Counterterrorism Operations

    Science.gov (United States)

    2016-04-27

    results of the current analysis and in Mouton et al., 2015, is the relative cost -effectiveness between the CH-47D and the Mi-17v5. In the previous...helicopters from Sikorsky to fulfill a number of roles in counterterrorism operations. Rising costs and delays in delivery raised the question of...whether other cost -effective options exist to meet Tunisia’s helicopter requirement. Approach Our team conducted a preliminary assessment of

  16. Modeling the complete Otto cycle: Preliminary version. [computer programming

    Science.gov (United States)

    Zeleznik, F. J.; Mcbride, B. J.

    1977-01-01

    A description is given of the equations and the computer program being developed to model the complete Otto cycle. The program incorporates such important features as: (1) heat transfer, (2) finite combustion rates, (3) complete chemical kinetics in the burned gas, (4) exhaust gas recirculation, and (5) manifold vacuum or supercharging. Changes in thermodynamic, kinetic and transport data as well as model parameters can be made without reprogramming. Preliminary calculations indicate that: (1) chemistry and heat transfer significantly affect composition and performance, (2) there seems to be a strong interaction among model parameters, and (3) a number of cycles must be calculated in order to obtain steady-state conditions.

  17. A Preliminary Tsunami vulnerability analysis for Bakirkoy district in Istanbul

    Science.gov (United States)

    Tufekci, Duygu; Lutfi Suzen, M.; Cevdet Yalciner, Ahmet; Zaytsev, Andrey

    2016-04-01

    Resilience of coastal utilities after earthquakes and tsunamis has major importance for efficient and proper rescue and recovery operations soon after the disasters. Vulnerability assessment of coastal areas under extreme events has major importance for preparedness and development of mitigation strategies. The Sea of Marmara has experienced numerous earthquakes as well as associated tsunamis. There are variety of coastal facilities such as ports, small craft harbors, and terminals for maritime transportation, water front roads and business centers mainly at North Coast of Marmara Sea in megacity Istanbul. A detailed vulnerability analysis for Yenikapi region and a detailed resilience analysis for Haydarpasa port in Istanbul have been studied in previously by Cankaya et al., (2015) and Aytore et al., (2015) in SATREPS project. In this study, the methodology of vulnerability analysis under tsunami attack given in Cankaya et al., (2015) is modified and applied to Bakirkoy district of Istanbul. Bakirkoy district is located at western part of Istanbul and faces to the North Coast of Marmara Sea from 28.77oE to 28.89oE. High resolution spatial dataset of Istanbul Metropolitan Municipality (IMM) is used and analyzed. The bathymetry and topography database and the spatial dataset containing all buildings/structures/infrastructures in the district are collated and utilized for tsunami numerical modeling and following vulnerability analysis. The tsunami parameters from deterministically defined worst case scenarios are computed from the simulations using tsunami numerical model NAMI DANCE. The vulnerability assessment parameters in the district according to vulnerability and resilience are defined; and scored by implementation of a GIS based TVA with appropriate MCDA methods. The risk level is computed using tsunami intensity (level of flow depth from simulations) and TVA results at every location in Bakirkoy district. The preliminary results are presented and discussed

  18. Analysis of vector models in quantification of artifacts produced by standard prosthetic inlays in Cone-Beam Computed Tomography (CBCT)--a preliminary study.

    Science.gov (United States)

    Różyło-Kalinowska, Ingrid; Miechowicz, Sławomir; Sarna-Boś, Katarzyna; Borowicz, Janusz; Kalinowski, Paweł

    2014-11-17

    Cone-beam computed tomography (CBCT) is a relatively new, but highly efficient imaging method applied first in dentistry in 1998. However, the quality of the obtained slices depends among other things on artifacts generated by dental restorations as well as orthodontic and prosthetic appliances. The aim of the study was to quantify the artifacts produced by standard prosthetic inlays in CBCT images. The material consisted of 17 standard prosthetic inlays mounted in dental roots embedded in resin. The samples were examined by means of a large field of view CBCT unit, Galileos (Sirona, Germany), at 85 kV and 14 mAs. The analysis was performed using Able 3DDoctor software for data in the CT raster space as well as by means of Materialise Magics software for generated vector models (STL). The masks generated in the raster space included the area of the inlays together with image artifacts. The region of interest (ROI) of the raster space is a set of voxels from a selected range of Hounsfield units (109-3071). Ceramic inlay with zirconium dioxide (Cera Post) as well as epoxy resin inlay including silica fibers enriched with zirconium (Easy Post) produced the most intense artifacts. The smallest image distortions were created by titanium inlays, both passive (Harald Nordin) and active (Flexi Flange). Inlays containing zirconium generated the strongest artifacts, thus leading to the greatest distortions in the CBCT images. Carbon fiber inlay did not considerably affect the image quality.

  19. Analysis of Vector Models in Quantification of Artifacts Produced by Standard Prosthetic Inlays in Cone-Beam Computed Tomography (CBCT – a Preliminary Study

    Directory of Open Access Journals (Sweden)

    Ingrid Różyło-Kalinowska

    2014-11-01

    Full Text Available Cone-beam computed tomography (CBCT is a relatively new, but highly efficient imaging method applied first in dentistry in 1998. However, the quality of the obtained slices depends among other things on artifacts generated by dental restorations as well as orthodontic and prosthetic appliances. The aim of the study was to quantify the artifacts produced by standard prosthetic inlays in CBCT images. The material consisted of 17 standard prosthetic inlays mounted in dental roots embedded in resin. The samples were examined by means of a large field of view CBCT unit, Galileos (Sirona, Germany, at 85 kV and 14 mAs. The analysis was performed using Able 3DDoctor software for data in the CT raster space as well as by means of Materialise Magics software for generated vector models (STL. The masks generated in the raster space included the area of the inlays together with image artifacts. The region of interest (ROI of the raster space is a set of voxels from a selected range of Hounsfield units (109-3071. Ceramic inlay with zirconium dioxide (Cera Post as well as epoxy resin inlay including silica fibers enriched with zirconium (Easy Post produced the most intense artifacts. The smallest image distortions were created by titanium inlays, both passive (Harald Nordin and active (Flexi Flange. Inlays containing zirconium generated the strongest artifacts, thus leading to the greatest distortions in the CBCT images. Carbon fiber inlay did not considerably affect the image quality.

  20. Modeling the connection between development and evolution: Preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Mjolsness, E.; Reinitz, J. [Yale Univ., New Haven, CT (United States); Garrett, C.D. [Washington Univ., Seattle, WA (United States). Dept. of Computer Science; Sharp, D.H. [Los Alamos National Lab., NM (United States)

    1993-07-29

    In this paper we outline a model which incorporates development processes into an evolutionary frame work. The model consists of three sectors describing development, genetics, and the selective environment. The formulation of models governing each sector uses dynamical grammars to describe processes in which state variables evolve in a quantitative fashion, and the number and type of participating biological entities can change. This program has previously been elaborated for development. Its extension to the other sectors of the model is discussed here and forms the basis for further approximations. A specific implementation of these ideas is described for an idealized model of the evolution of a multicellular organism. While this model doe not describe an actual biological system, it illustrates the interplay of development and evolution. Preliminary results of numerical simulations of this idealized model are presented.

  1. Preliminary Analysis of Remote Monitoring & Robotic Concepts for Performance Confirmation

    Energy Technology Data Exchange (ETDEWEB)

    D.A. McAffee

    1997-02-18

    ) Identify and discuss the main Performance Confirmation monitoring needs and requirements during the post-emplacement preclosure period. This includes radiological, non-radiological, host rock, and infrastructure performance monitoring needs. It also includes monitoring for possible off-normal events. (Presented in Section 7.3). (3) Identify general approaches and methods for obtaining performance information from within the emplacement drifts for Performance Confirmation. (Presented in Section 7.4) (4)Review and discuss available technologies and design strategies that may permit the use of remotely operated systems within the hostile thermal and radiation environment expected within the emplacement drifts. (Presented in Section 7.5). (5) Based on Performance Confirmation monitoring needs and available technologies, identify potential application areas for remote systems and robotics for post-emplacement preclosure Performance Confirmation activities (Presented in Section 7.6). (6) Develop preliminary remote monitoring and robotic concepts for post-emplacement, preclosure Performance Confirmation activities. (Presented in Section 7.7) This analysis is being performed very early in the systems engineering cycle, even as issues related to the Performance Confirmation program planning phase are being formulated and while the associated needs, constraints and objectives are yet to be fully determined and defined. This analysis is part of an issue formulation effort and is primarily concerned with identification and description of key issues related to remotely monitoring repository performance for Performance Confirmation. One of the purposes of this analysis is to provide an early investigation of potential design challenges that may have a high impact on future design concepts. This analysis can be used to guide future concept development and help access what is feasible and achievable by application of remote systems technology. Future design and systems engineering

  2. Fukushima Daiichi unit 1 uncertainty analysis--Preliminary selection of uncertain parameters and analysis methodology

    Energy Technology Data Exchange (ETDEWEB)

    Cardoni, Jeffrey N.; Kalinich, Donald A.

    2014-02-01

    Sandia National Laboratories (SNL) plans to conduct uncertainty analyses (UA) on the Fukushima Daiichi unit (1F1) plant with the MELCOR code. The model to be used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). However, that study only examined a handful of various model inputs and boundary conditions, and the predictions yielded only fair agreement with plant data and current release estimates. The goal of this uncertainty study is to perform a focused evaluation of uncertainty in core melt progression behavior and its effect on key figures-of-merit (e.g., hydrogen production, vessel lower head failure, etc.). In preparation for the SNL Fukushima UA work, a scoping study has been completed to identify important core melt progression parameters for the uncertainty analysis. The study also lays out a preliminary UA methodology.

  3. Preliminary analysis of Alvito-Odivelas reservoir system operation under climate change scenarios

    OpenAIRE

    2008-01-01

    The present study provides a preliminary analysis of the impact of climate change on a water resources system of Alentejo region in the South of Portugal. Regional climate model HadRM3P forced by the Global Circulation Model HadAM3P A2 of the Hadley Centre, is used to derive temperature and precipitation data, which in turn is used as input to hydrological model (SHETRAN) for simulation of future streamflow. Dynamic programming based models are used for operation of reservoir system in order ...

  4. Preliminary study on enhancing waste management best practice model in Malaysia construction industry

    Science.gov (United States)

    Jamaludin, Amril Hadri; Karim, Nurulzatushima Abdul; Noor, Raja Nor Husna Raja Mohd; Othman, Nurulhidayah; Malik, Sulaiman Abdul

    2017-08-01

    Construction waste management (CWM) is the practice of minimizing and diverting construction waste, demolition debris, and land-clearing debris from disposal and redirecting recyclable resources back into the construction process. Best practice model means best choice from the collection of other practices that was built for purpose of construction waste management. The practice model can help the contractors in minimizing waste before the construction activities will be started. The importance of minimizing wastage will have direct impact on time, cost and quality of a construction project. This paper is focusing on the preliminary study to determine the factors of waste generation in the construction sites and identify the effectiveness of existing construction waste management practice conducted in Malaysia. The paper will also include the preliminary works of planned research location, data collection method, and analysis to be done by using the Analytical Hierarchy Process (AHP) to help in developing suitable waste management best practice model that can be used in the country.

  5. Preliminary Analysis of ULPC Light Curves Using Fourier Decomposition Technique

    CERN Document Server

    Ngeow, Chow-Choong; Kanbur, Shashi; Barrett, Brittany; Lin, Bin

    2013-01-01

    Recent work on Ultra Long Period Cepheids (ULPCs) has suggested their usefulness as a distance indicator, but has not commented on their relationship as compared with other types of variable stars. In this work, we use Fourier analysis to quantify the structure of ULPC light curves and compare them to Classical Cepheids and Mira variables. Our preliminary results suggest that the low order Fourier parameters of ULPCs show a continuous trend defined by Classical Cepheids after the resonance around 10 days. However their Fourier parameters also overlapped with those from Miras, which make the classification of long period variable stars difficult based on the light curves information alone.

  6. Determinants of Trade Credit: A Preliminary Analysis on Construction Sector

    Directory of Open Access Journals (Sweden)

    Nicoleta Barbuta-Misu

    2016-07-01

    Full Text Available This paper introduces a preliminary analysis of the correlations between trade credit and some selected measures of financial performance for a sample of 958 firms acting in the construction sector. The examined period covers 2004-2013. The sample derived from Amadeus database contains firms that have sold and bought on credit. Results showed that larger firms offered and used more credit than counterparties. Firms offered and used in same time credit, but not in same level. Firms with higher return on assets and profit margin used and offered less credit from suppliers, respectively to clients. Moreover, more liquid firms used less trade payables.

  7. Preliminary analysis of effects of thermal loading on gas and heat flow within the framework of the LBNL/USGS site-scale model

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Y.S.; Chen, G.; Bodvarsson, G.

    1995-12-01

    The US Department of Energy is performing detailed site characterization studies at Yucca Mountain to determine its suitability as a geological repository site for high level nuclear wastes. As part of these research efforts, a three-dimensional, site-scale unsaturated-zone model has been developed at Lawrence Berkeley National Laboratory (LBNL) in collaboration with the US Geological Survey (USGS). The primary objectives of developing the 3-D site-scale model are to predict the ambient hydrogeological conditions and the movement of moisture and gas within the unsaturated zone of the mountain. In addition, the model has the capability of modeling non-isothermal flow and transport phenomena at the mountain. Applications of such a site-scale model should include evaluation of effects of thermal loading on heated gas and heat flow through the mountain for long-term performance assessment of the repository. Emplacement of heat-generating, high-level nuclear wastes at Yucca Mountain would create complex multiphase fluid flow and heat transfer processes. The physical mechanisms include conductive and convective heat transfer, phase change phenomena (vaporization and condensation), flow of liquid and gas phases under variably-saturated condition, diffusion and dispersion of vapor and gas, vapor sorption, and vapor-pressure lowering effects. The heterogeneity of complicated geological setting at Yucca Mountain, such as alternating, layers of porous-fractured rocks, will significantly affect the processes of fluid and heat flow.

  8. Multi-linear regression analysis, preliminary biotic ligand modeling, and cross species comparison of the effects of water chemistry on chronic lead toxicity in invertebrates.

    Science.gov (United States)

    Esbaugh, A J; Brix, K V; Mager, E M; De Schamphelaere, K; Grosell, M

    2012-03-01

    The current study examined the chronic toxicity of lead (Pb) to three invertebrate species: the cladoceran Ceriodaphnia dubia, the snail Lymnaea stagnalis and the rotifer Philodina rapida. The test media consisted of natural waters from across North America, varying in pertinent water chemistry parameters including dissolved organic carbon (DOC), calcium, pH and total CO(2). Chronic toxicity was assessed using reproductive endpoints for C. dubia and P. rapida while growth was assessed for L. stagnalis, with chronic toxicity varying markedly according to water chemistry. A multi-linear regression (MLR) approach was used to identify the relative importance of individual water chemistry components in predicting chronic Pb toxicity for each species. DOC was an integral component of MLR models for C. dubia and L. stagnalis, but surprisingly had no predictive impact on chronic Pb toxicity for P. rapida. Furthermore, sodium and total CO(2) were also identified as important factors affecting C. dubia toxicity; no other factors were predictive for L. stagnalis. The Pb toxicity of P. rapida was predicted by calcium and pH. The predictive power of the C. dubia and L. stagnalis MLR models was generally similar to that of the current C. dubia BLM, with R(2) values of 0.55 and 0.82 for the respective MLR models, compared to 0.45 and 0.79 for the respective BLMs. In contrast the BLM poorly predicted P. rapida toxicity (R(2)=0.19), as compared to the MLR (R(2)=0.92). The cross species variability in the effects of water chemistry, especially with respect to rotifers, suggests that cross species modeling of invertebrate chronic Pb toxicity using a C. dubia model may not always be appropriate.

  9. GPS observations of coseismic deformation following the 2016, August 24, Mw 6 Amatrice earthquake (central Italy: data, analysis and preliminary fault model

    Directory of Open Access Journals (Sweden)

    Daniele Cheloni

    2016-11-01

    Full Text Available We used continuous Global Positioning System (GPS measurements to infer the fault geometry and the amount of coseismic slip associated to the August 24, 2016 Mw 6 Amatrice earthquake. We realized a three dimensional coseismic displacement field by combining different geodetic solutions generated by three independent analyses of the raw GPS observations. The coseismic deformation field described in this work aims at representing a consensus solution that minimizes the systematic biases potentially present in the individual geodetic solutions. Because of the limited number of stations available we modeled the measured coseismic displacements using a uniform slip model, deriving the geometry and kinematics of the causative fault, finding good agreement between our geodetically derived fault plane and other seismological and geological observations.

  10. Enhanced Accident Tolerant Fuels for LWRS - A Preliminary Systems Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gilles Youinou; R. Sonat Sen

    2013-09-01

    The severe accident at Fukushima Daiichi nuclear plants illustrates the need for continuous improvements through developing and implementing technologies that contribute to safe, reliable and cost-effective operation of the nuclear fleet. Development of enhanced accident tolerant fuel contributes to this effort. These fuels, in comparison with the standard zircaloy – UO2 system currently used by the LWR industry, should be designed such that they tolerate loss of active cooling in the core for a longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, operational transients, and design-basis events. This report presents a preliminary systems analysis related to most of these concepts. The potential impacts of these innovative LWR fuels on the front-end of the fuel cycle, on the reactor operation and on the back-end of the fuel cycle are succinctly described without having the pretension of being exhaustive. Since the design of these various concepts is still a work in progress, this analysis can only be preliminary and could be updated as the designs converge on their respective final version.

  11. Electronic Warfare M-on-N Digital Simulation Logging Requirements and HDF5: A Preliminary Analysis

    Science.gov (United States)

    2017-04-12

    E. Jarvis Electronic Warfare M-on- N Digital Simulation Logging Requirements and HDF5: A Preliminary Analysis Advanced Techniques Branch Tactical...12-04-2017 NRL Memorandum Report Electronic Warfare M-on- N Digital Simulation Logging Requirements and HDF5: A Preliminary Analysis Donald E...ELECTRONIC WARFARE M-ON- N DIGITAL SIMULATION LOGGING REQUIREMENTS AND HDF5: A PRELIMINARY ANALYSIS 1. INTRODUCTION HDF5 technology [Folk] has been

  12. Preliminary analysis of modeling of Pars and steam injectors to support long-term operation of LWR passive ECCS using a best estimate thermal-hydraulics code

    Energy Technology Data Exchange (ETDEWEB)

    Morales S, J. B.; Sanchez J, J. [UNAM, Facultad de Ingenieria, Circuito Interior s/n, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Espinosa P, G., E-mail: jaimebmoraless@gmail.co [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico)

    2010-10-15

    pools. This work presents Pars and steam injectors models, simulations and results of implementations in a best estimated thermal-hydraulics code, which are to be used for evaluations of these systems as long-term supports to ECCS. Lumped parameter models based on heat and mass balances have also been developed to test required additional best estimated code routines needed for the representation of Pars. (Author)

  13. Preliminary hazards analysis of thermal scrap stabilization system. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, W.S.

    1994-08-23

    This preliminary analysis examined the HA-21I glovebox and its supporting systems for potential process hazards. Upon further analysis, the thermal stabilization system has been installed in gloveboxes HC-21A and HC-21C. The use of HC-21C and HC-21A simplified the initial safety analysis. In addition, these gloveboxes were cleaner and required less modification for operation than glovebox HA-21I. While this document refers to glovebox HA-21I for the hazards analysis performed, glovebox HC-21C is sufficiently similar that the following analysis is also valid for HC-21C. This hazards analysis document is being re-released as revision 1 to include the updated flowsheet document (Appendix C) and the updated design basis (Appendix D). The revised Process Flow Schematic has also been included (Appendix E). This Current revision incorporates the recommendations provided from the original hazards analysis as well. The System Design Description (SDD) has also been appended (Appendix H) to document the bases for Safety Classification of thermal stabilization equipment.

  14. Analysis preliminary phytochemical raw extract of leaves Nephrolepis pectinata

    Directory of Open Access Journals (Sweden)

    Natally Marreiros Gomes

    2017-06-01

    Full Text Available The Nephrolepis pectinata popularly known as paulista fern, ladder-heaven, cat tail, belongs to the family Davalliaceae. For the beauty of the arrangements of their leaves ferns are quite commercialized in Brazil, however, have not been described in the literature studies on their pharmacological potential. Thus, the objective of this research was to analyze the phytochemical properties of the crude extract of the leaves of Nephrolepis pectinata. To perform the phytochemical analysis were initially made the collection of the vegetable, preparation of voucher specimen, washing, drying and grinding. Then, extraction by percolation method and end the phytochemical analysis. Preliminary results phytochemicals the crude extract of the leaves of Nephrolepis pectinata tested positive for reducing sugars, phenols/tannins (catechins tannins and catechins.

  15. Preliminary Study of the Gravimetric Local Geoid Model in Jordan:

    Directory of Open Access Journals (Sweden)

    A. Al-Zoubi

    2007-06-01

    Full Text Available Recently, there is an increased interest in studying and defining the Local and Regional Geoid Model worldwide, due to its importance in geodetic and geophysics applications. The use of the Global Positioning System (GPS is internationally growing, yet the lack of any Geoid Model for Jordan has limited the use of GPS for geodetic applications. Therefore, this work aims to present the preliminary results that we propose for The Gravimetric Jordanian Geoid Model (GeoJordan. The model is created using gravimetric data and the GravSoft program. The validation of this model is done by using GPS measurements and precise leveling at Amman area. However, a comparison between the Global Geopotential Models OSU91A and EGM96 showed great discrepancies through the presented results. Also, presenting the approach used to obtain the orthometric height from GPS ellipsoidal height measurements. Nevertheless, the error margin; obtained in this initial study of the GeoJordan after fitting the data with GPS/leveling measurement; is about (10cm, in tested area whereas the standard error of the created model is about (40cm.

  16. Solar Stirling power generation - Systems analysis and preliminary tests

    Science.gov (United States)

    Selcuk, M. K.; Wu, Y.-C.; Moynihan, P. I.; Day, F. D., III

    1977-01-01

    The feasibility of an electric power generation system utilizing a sun-tracking parabolic concentrator and a Stirling engine/linear alternator is being evaluated. Performance predictions and cost analysis of a proposed large distributed system are discussed. Design details and preliminary test results are presented for a 9.5 ft diameter parabolic dish at the Jet Propulsion Laboratory (Caltech) Table Mountain Test Facility. Low temperature calorimetric measurements were conducted to evaluate the concentrator performance, and a helium flow system is being used to test the solar receiver at anticipated working fluid temperatures (up to 650 or 1200 C) to evaluate the receiver thermal performance. The receiver body is designed to adapt to a free-piston Stirling engine which powers a linear alternator assembly for direct electric power generation. During the next phase of the program, experiments with an engine and receiver integrated into the concentrator assembly are planned.

  17. Primate phylogeny studied by comparative determinant analysis. A preliminary report.

    Science.gov (United States)

    Bauer, K

    1993-01-01

    In this preliminary report the divergence times for the major primate groups are given, calculated from a study by comparative determinant analysis of 69 proteins (equaling 0.1% of the whole genetic information). With an origin of the primate order set at 80 million years before present, the ages of the last common ancestors (LCAs) of man and the major primate groups obtained this way are as follows: Pan troglodytes 5.2; Gorilla gorilla 7.4; Pongo pygmaeus 19.2; Hylobates lar 20.3; Old World monkeys 31.4; Lagothrix lagotricha 46.0; Cebus albifrons 59.5; three lemur species 67.0, and Galago crassicaudatus 73.3 million years. The LCA results and the approach are shortly discussed. A full account of this extended investigation including results on nonprimate mammals and on the determinant structures and the immunologically derived evolutionary rates of the proteins analyzed will be published elsewhere.

  18. PRELIMINARY PHYTOCHEMICAL ANALYSIS OF ACTINIOPTERIS RADIATA (SWARTZ LINK.

    Directory of Open Access Journals (Sweden)

    R. Manonmani

    2013-06-01

    Full Text Available The objective of the present study was to find out the presence of preliminary phytochemicals in six different solvent extracts of Actiniopteris radiata (Swartz link. by qualitative screening methods. The solvent used for the extraction of leaf and rhizome powder were ethanol, petroleum ether, chloroform, acetone, DMSO and aqueous. The secondary metabolites such as steroids, triterpenoids, reducing sugars, sugars, alkaloids, phenolic compounds, catechins, flavonoids, saponins, tannins, anthroquinones and amino acids were screened by using standard methods. The phytochemical analysis of the ethanolic extract of both (leaf & rhizome revealed the presence of most active constituents than the other solvents. The ethanolic rhizome extracts of Actiniopteris radiata showed higher amount of phytochemicals when compared with the ethanolic leaf extracts.

  19. Preliminary deformation model for National Seismic Hazard map of Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Meilano, Irwan; Gunawan, Endra; Sarsito, Dina; Prijatna, Kosasih; Abidin, Hasanuddin Z. [Geodesy Research Division, Faculty of Earth Science and Technology, Institute of Technology Bandung (Indonesia); Susilo,; Efendi, Joni [Agency for Geospatial Information (BIG) (Indonesia)

    2015-04-24

    Preliminary deformation model for the Indonesia’s National Seismic Hazard (NSH) map is constructed as the block rotation and strain accumulation function at the elastic half-space. Deformation due to rigid body motion is estimated by rotating six tectonic blocks in Indonesia. The interseismic deformation due to subduction is estimated by assuming coupling on subduction interface while deformation at active fault is calculated by assuming each of the fault‘s segment slips beneath a locking depth or in combination with creeping in a shallower part. This research shows that rigid body motion dominates the deformation pattern with magnitude more than 15 mm/year, except in the narrow area near subduction zones and active faults where significant deformation reach to 25 mm/year.

  20. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    Yi DAI; Zhao-jun WANG; Chang-liang ZOU

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method.Sullivan and woodall pointed out the test statistic lrt (n1, n2) is approximately distributed as x2 (2) as the sample size n, n1 and n2 are very large, and the value of n1 = 2, 3,..., n- 2 and that of n2 = n- n1.So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained.In addition, the properties of the standardized likelihood ratio statistic slr(n1,n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i ≠ n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both.Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  1. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method. Sullivan and woodall pointed out the test statistic lrt(n1, n2) is approximately distributed as x2(2) as the sample size n,n1 and n2 are very large, and the value of n1 = 2,3,..., n - 2 and that of n2 = n - n1. So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained. In addition, the properties of the standardized likelihood ratio statistic slr(n1, n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i≠n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both. Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  2. ANSI/ASHRAE/IESNA Standard 90.1-2010 Preliminary Determination Quantitative Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, Mark A.; Liu, Bing; Rosenberg, Michael I.

    2010-11-01

    The United States (U.S.) Department of Energy (DOE) conducted a preliminary quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010 (ASHRAE Standard 90.1-2010, Standard 90.1-2010, or 2010 edition) would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2007(ASHRAE Standard 90.1-2007, Standard 90.1-2007, or 2007 edition). The preliminary analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s preliminary determination. However, out of the 109 addenda, 34 were preliminarily determined to have measureable and quantifiable impact.

  3. Preliminary 2D numerical modeling of common granular problems

    Science.gov (United States)

    Wyser, Emmanuel; Jaboyedoff, Michel

    2017-04-01

    Granular studies received an increasing interest during the last decade. Many scientific investigations were successfully addressed to acknowledge the ubiquitous behavior of granular matter. We investigate liquid impacts onto granular beds, i.e. the influence of the packing and compaction-dilation transition. However, a physically-based model is still lacking to address complex microscopic features of granular bed response during liquid impacts such as compaction-dilation transition or granular bed uplifts (Wyser et al. in review). We present our preliminary 2D numerical modeling based on the Discrete Element Method (DEM) using nonlinear contact force law (the Hertz-Mindlin model) for disk shape particles. The algorithm is written in C programming language. Our 2D model provides an analytical tool to address granular problems such as i) granular collapses and ii) static granular assembliy problems. This provides a validation framework of our numerical approach by comparing our numerical results with previous laboratory experiments or numerical works. Inspired by the work of Warnett et al. (2014) and Staron & Hinch (2005), we studied i) the axisymetric collapse of granular columns. We addressed the scaling between the initial aspect ratio and the final runout distance. Our numerical results are in good aggreement with the previous studies of Warnett et al. (2014) and Staron & Hinch (2005). ii) Reproducing static problems for regular and randomly stacked particles provides a valid comparison to results of Egholm (2007). Vertical and horizontal stresses within the assembly are quite identical to stresses obtained by Egholm (2007), thus demonstating the consistency of our 2D numerical model. Our 2D numerical model is able to reproduce common granular case studies such as granular collapses or static problems. However, a sufficient small timestep should be used to ensure a good numerical consistency, resulting in higher computational time. The latter becomes critical

  4. PORFLOW MODELING FOR A PRELIMINARY ASSESSMENT OF THE PERFORMANCE OF NEW SALTSTONE DISPOSAL UNIT DESIGNS

    Energy Technology Data Exchange (ETDEWEB)

    Smith, F.

    2012-08-06

    At the request of Savannah River Remediation (SRR), SRNL has analyzed the expected performance obtained from using seven 32 million gallon Saltstone Disposal Units (SDUs) in the Z-Area Saltstone Disposal Facility (SDF) to store future saltstone grout. The analysis was based on preliminary SDU final design specifications. The analysis used PORFLOW modeling to calculate the release of 20 radionuclides from an SDU and transport of the radionuclides and daughters through the vadose zone. Results from this vadose zone analysis were combined with previously calculated releases from existing saltstone vaults and FDCs and a second PORFLOW model run to calculate aquifer transport to assessment points located along a boundary 100 m from the nearest edge of the SDF sources. Peak concentrations within 12 sectors spaced along the 100 m boundary were determined over a period of evaluation extending 20,000 years after SDF closure cap placement. These peak concentrations were provided to SRR to use as input for dose calculations.

  5. Preliminary modeling of the TMI-2 accident with MELPROG-TRAC

    Energy Technology Data Exchange (ETDEWEB)

    Jenks, R.P.

    1988-01-01

    In support of Nuclear Regulatory Commission and Organization for Economic Cooperation and Development (OECD)-sponsored Three Mile Island-Unit 2 (TMI-2) Analysis Exercise studies, work has been performed to develop a simulation model of the TMI-2 plant for use with the integrated MELPROG-TRAC computer code. Numerous nuclear power plant simulation studies have been performed with the TRAC computer code in the past. Some of these addressed the TMI-2 accident or other hypothetical events at the TMI plant. In addition, studies have been previously performed with the MELPROG-TRAC code using Oconee-1 and Surry plant models. This paper describes the preliminary MELPROG-TRAC input model for severe accident analysis.

  6. Preliminary analysis of distributed in situ soil moisture measurements

    Directory of Open Access Journals (Sweden)

    L. Brocca

    2005-01-01

    Full Text Available Surface soil moisture content is highly variable in both space and time. Remote sensing can provide an effective methodology for mapping surface moisture content over large areas but ground based measurements are required to test its reliability and to calibrate retrieval algorithms. Recently, we had the opportunity to design and perform an experiment aimed at jointly acquiring measurements of surface soil water content at various locations and remotely sensed hyperspectral data. The area selected for the experiment is located in central Umbria and it extends for 90km2. For the area, detailed lithological and multi-temporal landslide inventory maps were available. We identified eight plots where measurements of soil water content were made using a Time Domain Reflectometer (TDR. The plots range in size from 100m2 to 600m2, and cover a variety of topographic and morphological settings. The TDR measurements were conducted during four days, on 5 April, 15 April, 2 May and 3 May 2004. On 3 May the NERC airborne CASI 2 acquired the hyperspectral data. Preliminary analysis concerning the matching between the landslides and the soil moisture were reported. Statistical and geostatistical analysis investigating the spatial-temporal soil moisture distribution were performed. These results will be compared with the data of surface temperature obtained from the remotely sensed hyperspectral sensor.

  7. Hierarchical Modeling and Robust Synthesis for the Preliminary Design of Large Scale Complex Systems

    Science.gov (United States)

    Koch, Patrick N.

    1997-01-01

    Large-scale complex systems are characterized by multiple interacting subsystems and the analysis of multiple disciplines. The design and development of such systems inevitably requires the resolution of multiple conflicting objectives. The size of complex systems, however, prohibits the development of comprehensive system models, and thus these systems must be partitioned into their constituent parts. Because simultaneous solution of individual subsystem models is often not manageable iteration is inevitable and often excessive. In this dissertation these issues are addressed through the development of a method for hierarchical robust preliminary design exploration to facilitate concurrent system and subsystem design exploration, for the concurrent generation of robust system and subsystem specifications for the preliminary design of multi-level, multi-objective, large-scale complex systems. This method is developed through the integration and expansion of current design techniques: Hierarchical partitioning and modeling techniques for partitioning large-scale complex systems into more tractable parts, and allowing integration of subproblems for system synthesis; Statistical experimentation and approximation techniques for increasing both the efficiency and the comprehensiveness of preliminary design exploration; and Noise modeling techniques for implementing robust preliminary design when approximate models are employed. Hierarchical partitioning and modeling techniques including intermediate responses, linking variables, and compatibility constraints are incorporated within a hierarchical compromise decision support problem formulation for synthesizing subproblem solutions for a partitioned system. Experimentation and approximation techniques are employed for concurrent investigations and modeling of partitioned subproblems. A modified composite experiment is introduced for fitting better predictive models across the ranges of the factors, and an approach for

  8. Grid-connected ICES: preliminary feasibility analysis and evaluation. Volume 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1977-06-30

    The HEAL Complex in New Orleans will serve as a Demonstration Community for which the ICES Demonstration System will be designed. The complex is a group of hospitals, clinics, research facilities, and medical educational facilities. The five tasks reported on are: preliminary energy analysis; preliminary institutional assessment; conceptual design; firming-up of commitments; and detailed work management plan.

  9. Purification, crystallization and preliminary X-ray analysis of struthiocalcin 1 from ostrich (Struthio camelus) eggshell

    Energy Technology Data Exchange (ETDEWEB)

    Reyes-Grajeda, Juan Pablo [Unidad de Proteómica Médica, Instituto Nacional de Medicina Genómica, Mexico City (Mexico); Marín-García, Liliana [Instituto de Química, Universidad Nacional Autónoma de México (Mexico); Stojanoff, Vivian [Brookhaven National Laboratories, NSLS, Upton, New York (United States); Moreno, Abel, E-mail: carcamo@servidor.unam.mx [Instituto de Química, Universidad Nacional Autónoma de México (Mexico); Unidad de Proteómica Médica, Instituto Nacional de Medicina Genómica, Mexico City (Mexico)

    2007-11-01

    The purification, crystallization and preliminary X-ray diffraction data of the protein struthiocalcin 1 isolated from ostrich eggshell are reported. The purification, crystallization and preliminary X-ray analysis of struthiocalcin 1 (SCA-1), a protein obtained from the intramineral part of ostrich (Struthio camelus) eggshell, is reported.

  10. Investigation of Sorption and Diffusion Mechanisms, and Preliminary Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bhave, Ramesh R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jubin, Robert Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Spencer, Barry B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nair, Sankar [Georgia Inst. of Technology, Atlanta, GA (United States)

    2017-02-01

    This report describes the synthesis and evaluation of molecular sieve zeolite membranes to separate and concentrate tritiated water (HTO) from dilute HTO-bearing aqueous streams. Several monovalent and divalent cation exchanged silico alumino phosphate (SAPO-34) molecular sieve zeolite membranes were synthesized on disk supports and characterized with gas and vapor permeation measurements. The pervaporation process performance was evaluated for the separation and concentration of tritiated water. Experiments were performed using tritiated water feed solution containing tritium at the high end of the range (1 mCi/mL) anticipated in a nuclear fuel processing system that includes both acid and water streams recycling. The tritium concentration was about 0.1 ppm. The permeate was recovered under vacuum. The HTO/H2O selectivity and separation factor calculated from the measured tritium concentrations ranged from 0.99 to 1.23, and 0.83-0.98, respectively. Although the membrane performance for HTO separation was lower than expected, several encouraging observations including molecular sieving and high vapor permeance are reported. Additionally, several new approaches are proposed, such as tuning the sorption and diffusion properties offered by small pore LTA zeolite materials, and cation exchanged aluminosilicates with high metal loading. It is hypothesized that substantially improved preferential transport of tritium (HTO) resulting in a more concentrated permeate can be achieved. Preliminary economic analysis for the membrane-based process to concentrate tritiated water is also discussed.

  11. Crystallization and preliminary crystallographic analysis of recombinant human galectin-1

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Stacy A. [Institute for Glycomics, Gold Coast Campus, Griffith University, Queensland 4222 (Australia); Scott, Ken [School of Biological Sciences, University of Auckland, Auckland (New Zealand); Blanchard, Helen, E-mail: h.blanchard@griffith.edu.au [Institute for Glycomics, Gold Coast Campus, Griffith University, Queensland 4222 (Australia)

    2007-11-01

    Human galectin-1 has been cloned, expressed in E. coli, purified and crystallized in the presence of both lactose (ligand) and β-mercaptoethanol under six different conditions. The X-ray diffraction data obtained have enabled the assignment of unit-cell parameters for two novel crystal forms of human galectin-1. Galectin-1 is considered to be a regulator protein as it is ubiquitously expressed throughout the adult body and is responsible for a broad range of cellular regulatory functions. Interest in galectin-1 from a drug-design perspective is founded on evidence of its overexpression by many cancers and its immunomodulatory properties. The development of galectin-1-specific inhibitors is a rational approach to the fight against cancer because although galectin-1 induces a plethora of effects, null mice appear normal. X-ray crystallographic structure determination will aid the structure-based design of galectin-1 inhibitors. Here, the crystallization and preliminary diffraction analysis of human galectin-1 crystals generated under six different conditions is reported. X-ray diffraction data enabled the assignment of unit-cell parameters for crystals grown under two conditions, one belongs to a tetragonal crystal system and the other was determined as monoclinic P2{sub 1}, representing two new crystal forms of human galectin-1.

  12. Preliminary radiation criteria and nuclear analysis for ETF

    Energy Technology Data Exchange (ETDEWEB)

    Engholm, B.A.

    1980-09-01

    Preliminary biological and materials radiation dose criteria for the Engineering Test Facility are described and tabulated. In keeping with the ETF Mission Statement, a key biological dose criterion is a 24-hour shutdown dose rate of 2 mrem/hr on the surface of the outboard bulk shield. Materials dose criteria, which primarily govern the inboard shield design, include 10/sup 9/ rads exposure limit to epoxy insulation, 3 x 10/sup -4/ dpa damage to the TF coil copper stabilizer, and a total nuclear heating rate of 5 kW in the inboard TF coils. Nuclear analysis performed during FY 80 was directed primarily at the inboard and outboard bulk shielding, and at radiation streaming in the neutral beam drift ducts. Inboard and outboard shield thicknesses to achieve the biological and materials radiation criteria are 75 cm inboard and 125 cm outboard, the configuration consisting of alternating layers of stainless steel and borated water. The outboard shield also includes a 5 cm layer of lead. NBI duct streaming analyses performed by ORNL and LASL will play a key role in the design of the duct and NBI shielding in FY 81. The NBI aluminum cryopanel nuclear heating rate during the heating cycle is about 1 milliwatt/cm/sup 3/, which is far less than the permissible limit.

  13. Preliminary analysis of aerial hyperspectral data on shallow lacustrine waters

    Science.gov (United States)

    Bianchi, Remo; Castagnoli, A.; Cavalli, Rosa M.; Marino, Carlo M.; Pignatti, Stefano; Zilioli, Eugenio

    1995-11-01

    The availability of MIVIS hyperspectral data, deriving from an aerial survey recently performed over a test-site in Lake Garda, Italy, gave the possibility of a preliminary new insight in the field of specific applications of remote sensing to shallow water analysis. The spectroradiometers in the visible and in the thermal infrared were explored in particular, accessing to helpful information for the detection of bio-physical indicators of water quality, either related to the surface/sub-surface of waters or to the bottom of the lake, since the study area presents very shallow waters, never exceeding a 6-meter depth in any case. Primary interest was the detection of man-induced activities along the margins, like sewage effect and sedimentary structure in the bottom or algal bloom. Secondly, a correlation between absorbivity coefficients in the visible bands and bathimetric contour lines in the proximity of the marginal zone of the lake was accomplished, by means of two indicative spectroradiometric transects.

  14. Preliminary Analysis of Species Partitioning in the DWPF Melter

    Energy Technology Data Exchange (ETDEWEB)

    Choi, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kesterson, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Johnson, F. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-07-15

    The work described in this report is preliminary in nature since its goal was to demonstrate the feasibility of estimating the off-gas entrainment rates from the Defense Waste Processing Facility (DWPF) melter based on a simple mass balance using measured feed and glass pour stream compositions and timeaveraged melter operating data over the duration of one canister-filling cycle. The only case considered in this study involved the SB6 pour stream sample taken while Canister #3472 was being filled over a 20-hour period on 12/20/2010, approximately three months after the bubblers were installed. The analytical results for that pour stream sample provided the necessary glass composition data for the mass balance calculations. To estimate the “matching” feed composition, which is not necessarily the same as that of the Melter Feed Tank (MFT) batch being fed at the time of pour stream sampling, a mixing model was developed involving three preceding MFT batches as well as the one being fed at that time based on the assumption of perfect mixing in the glass pool but with an induction period to account for the process delays involved in the calcination/fusion step in the cold cap and the melter turnover.

  15. Conversion Preliminary Safety Analysis Report for the NIST Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, D. J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Baek, J. S. [Brookhaven National Lab. (BNL), Upton, NY (United States); Hanson, A. L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Cheng, L-Y [Brookhaven National Lab. (BNL), Upton, NY (United States); Brown, N. [Brookhaven National Lab. (BNL), Upton, NY (United States); Cuadra, A. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-01-30

    The NIST Center for Neutron Research (NCNR) is a reactor-laboratory complex providing the National Institute of Standards and Technology (NIST) and the nation with a world-class facility for the performance of neutron-based research. The heart of this facility is the NIST research reactor (aka NBSR); a heavy water moderated and cooled reactor operating at 20 MW. It is fueled with high-enriched uranium (HEU) fuel elements. A Global Threat Reduction Initiative (GTRI) program is underway to convert the reactor to low-enriched uranium (LEU) fuel. This program includes the qualification of the proposed fuel, uranium and molybdenum alloy foil clad in an aluminum alloy, and the development of the fabrication techniques. This report is a preliminary version of the Safety Analysis Report (SAR) that would be submitted to the U.S. Nuclear Regulatory Commission (NRC) for approval prior to conversion. The report follows the recommended format and content from the NRC codified in NUREG-1537, “Guidelines for Preparing and Reviewing Applications for the Licensing of Non-power Reactors,” Chapter 18, “Highly Enriched to Low-Enriched Uranium Conversions.” The emphasis in any conversion SAR is to explain the differences between the LEU and HEU cores and to show the acceptability of the new design; there is no need to repeat information regarding the current reactor that will not change upon conversion. Hence, as seen in the report, the bulk of the SAR is devoted to Chapter 4, Reactor Description, and Chapter 13, Safety Analysis.

  16. Models of Economic Analysis

    OpenAIRE

    Adrian Ioana; Tiberiu Socaciu

    2013-01-01

    The article presents specific aspects of management and models for economic analysis. Thus, we present the main types of economic analysis: statistical analysis, dynamic analysis, static analysis, mathematical analysis, psychological analysis. Also we present the main object of the analysis: the technological activity analysis of a company, the analysis of the production costs, the economic activity analysis of a company, the analysis of equipment, the analysis of labor productivity, the anal...

  17. Preliminaries to a Social-Semiotic Model of Communicative Action

    Directory of Open Access Journals (Sweden)

    Antonio SANDU

    2015-12-01

    Full Text Available The purpose of this article is to bring contributions to the elaboration of a social-semiotic model of social constructionism, which will make a synthesis between the theory of communicative action and the theories of social-constructionist semiotic model?, based on the postulation of a social universe in a network of communicative interdependencies developed on levels of reality. The interpretative model we propose comes to conceptualize the particularities of the sociological analysis of the transmodern society, seen as a knowledge-based society, placed at the interference with the postmodern society; that of generalized permissiveness. The model proposed aims at a constructionist-fractalic (al? analysis (of deconstruction-reconstruction type of the interpretative drift of social constructs, under the empire of different constructive instances.

  18. Preliminary Modeling of Corrosion/Oxidation Properties of CrAl Alloy-coated Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jong-Dae; Kim, Hyo Chan; Shin, Chang Hwan; Yang, Yong Sik; In, Wang Kee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Accident tolerant fuel (ATF) cladding has been being developed globally after the Fukushima accident with the demands for the nuclear fuel having higher safety at normal operation conditions as well as even in a severe accident conditions. Korea Atomic Energy Research Institute (KAERI) has been developed some of remarkable ATF cladding candidates. They showed a superior oxidation/corrosion resistance in water and steam conditions to the commercial Zr alloys and totally different behaviors from commercial Zr alloys. Prior to evaluate entire fuel performance of newly developed CrAl alloy cladding by KAERI collectively, preliminary model of water-side corrosion and high temperature oxidation model were proposed. They were highly consistent with experimental results. Also this model is useful for the quantitative analysis with given with relative superior characteristics to existing commercial fuel claddings.

  19. Preliminary Design and Analysis of ITER In-Wall Shielding

    Institute of Scientific and Technical Information of China (English)

    LIU Changle; YU Jie; WU Songtao; CAI Yingxiang; PAN Wanjiang

    2007-01-01

    ITER in-wall shielding (IIS) is situated between the doubled shells of the ITER Vacuum Vessel (IVV). Its main functions are applied in shielding neutron, gamma-ray and toroidal field ripple reduction. The structure of IIS has been modelled according to the IVV design criteria which has been updated by the ITER team (IT). Static analysis and thermal expansion analysis were performed for the structure. Thermal-hydraulic analysis verified the heat removal capability and resulting temperature, pressure, and velocity changes in the coolant flow. Consequently, our design work is possibly suitable as a reference for IT's updated or final design in its next step.

  20. Preliminary Core Analysis of a Micro Modular Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Chang Keun; Chang, Jongwa [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Venneri, Francesco [Ultra Safe Nuclear Corporation, Los Alamos (United States); Hawari, Ayman [NC State Univ., Raleigh (United States)

    2014-05-15

    The Micro Modular Reactor (MMR) will be 'melt-down proof'(MDP) under all circumstances, including the complete loss of coolant, and will be easily transportable and retrievable, and suitable for use with very little site preparation and Balance of Plant (BOP) requirements for a variety of applications, from power generation and process heat applications in remote areas to grid-unattached locations, including ship propulsion. The Micro Modular Reactor design proposed in this paper has 3 meter diameter core (2 meter active core) which is suitable for 'factory manufactured' and has few tens year of service life for remote deployment. We confirmed the feasibility of long term service life by a preliminary neutronic analysis in terms of the excess reactivity, the temperature feedback coefficient, and the control margins. We are able to achieve a reasonably long core life time of 5 ∼ 10 years under typical thermal hydraulic condition of a helium cooled reactor. However, on a situation where longer service period and safety is important, we can reduce the power density to the level of typical pebble bed reactor. In this case we can design 10 MWt MMR with core diameter for 10 ∼ 40 years core life time without much loss in the economics. Several burnable poisons are studied and it is found that erbia mixed in the compact matrix seems reasonably good poison. The temperature feedback coefficients were remaining negative during lifetime. Drum type control rods at reflector region and few control rods inside core region are sufficient to control the reactivity during operation and to achieve safe cold shutdown state.

  1. Multidirectional Networks of Government Transparency: A Preliminary Model

    Directory of Open Access Journals (Sweden)

    Ahmad Subhan

    2016-11-01

    Full Text Available This article reviews some literature in theoretical level regarding two concepts: governance network and government transparency, in order to search for theoretical linkages and to build an alternative framework that can support the implementation of public disclosure. Transparency agenda has been implemented in various forms at international, national, and local level. Transparency application was also followed by Indonesia with the implementation of Public Information Disclosure Law since 2008. This enthusiasm is quite reasonable because transparency is believed to be one of the human rights principles; as well as a key to better governance, that can help democracy consolidation, prevent corruption, strengthen the legitimacy and improve efficiency. In order to maximize transparency, the government can use a network approach because of some changes at this time, such as democratization, decentralization, and liberalization has placed the government in a position where there is not one actor who manages the state power without stakeholder’s participation. In this context, the government needs to build synergies with other institutions in a reciprocal relationship with all stakeholders. Therefore, adopting the theory of government networks can be one of the strategies to strengthen government transparency. The findings of this article indicate that the government transparency application needs to develop networks in all directions: intragovernmental, intergovernmental and collaborative networks. These three types of network in contrast with the popular belief that government transparency is interpreted only as a procedural activity to outside parties. A preliminary model in this article gives an overview about the arena of government transparency with multi-directional networks more comprehensively.

  2. Preliminary evaluation of diabatic heating distribution from FGGE level 3b analysis data

    Science.gov (United States)

    Kasahara, A.; Mizzi, A. P.

    1985-01-01

    A method is presented for calculating the global distribution of diabatic heating rate. Preliminary results of global heating rate evaluated from the European center for Medium Range Weather Forecasts Level IIIb analysis data is also presented.

  3. Preliminary Nuclear Analysis for the HANARO Fuel Element with Burnable Absorber

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Chul Gyo; Kim, So Young; In, Won Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    Burnable absorber is used for reducing reactivity swing and power peaking in high performance research reactors. Development of the HANARO fuel element with burnable absorber was started in the U-Mo fuel development program at HANARO, but detailed full core analysis was not performed because the current HANARO fuel management system is uncertain to analysis the HANARO core with burnable absorber. A sophisticated reactor physics system is required to analysis the core. The McCARD code was selected and the detailed McCARD core models, in which the basic HANARO core model was developed by one of the McCARD developers, are used in this study. The development of nuclear fuel requires a long time and correct developing direction especially by the nuclear analysis. This paper presents a preliminary nuclear analysis to promote the fuel development. Based on the developed fuel, the further nuclear analysis will improve reactor performance and safety. Basic nuclear analysis for the HANARO and the AHR were performed for getting the proper fuel elements with burnable absorber. Addition of 0.3 - 0.4% Cd to the fuel meat is promising for the current HANARO fuel element. Small addition of burnable absorber may not change any fuel characteristics of the HANARO fuel element, but various basic tests and irradiation tests at the HANARO core are required.

  4. Mini-DIAL system measurements coupled with multivariate data analysis to identify TIC and TIM simulants: preliminary absorption database analysis.

    Science.gov (United States)

    Gaudio, P.; Malizia, A.; Gelfusa, M.; Martinelli, E.; Di Natale, C.; Poggi, L. A.; Bellecci, C.

    2017-01-01

    Nowadays Toxic Industrial Components (TICs) and Toxic Industrial Materials (TIMs) are one of the most dangerous and diffuse vehicle of contamination in urban and industrial areas. The academic world together with the industrial and military one are working on innovative solutions to monitor the diffusion in atmosphere of such pollutants. In this phase the most common commercial sensors are based on “point detection” technology but it is clear that such instruments cannot satisfy the needs of the smart cities. The new challenge is developing stand-off systems to continuously monitor the atmosphere. Quantum Electronics and Plasma Physics (QEP) research group has a long experience in laser system development and has built two demonstrators based on DIAL (Differential Absorption of Light) technology could be able to identify chemical agents in atmosphere. In this work the authors will present one of those DIAL system, the miniaturized one, together with the preliminary results of an experimental campaign conducted on TICs and TIMs simulants in cell with aim of use the absorption database for the further atmospheric an analysis using the same DIAL system. The experimental results are analysed with standard multivariate data analysis technique as Principal Component Analysis (PCA) to develop a classification model aimed at identifying organic chemical compound in atmosphere. The preliminary results of absorption coefficients of some chemical compound are shown together pre PCA analysis.

  5. The Organic Food Market and Marketing Initiatives in Europe: a Preliminary Analysis

    DEFF Research Database (Denmark)

    Kristensen, Niels Heine; Nielsen, Thorkild; Bruselius-Jensen, Maria Louisa

    2003-01-01

    Kristensen NH, Nielsen T, Bruselius-Jensen M, Scheperlen-Bøgh P, Beckie M, Foster C, Midmore P, Padel S (2002): The Organic Food Market and Marketing Initiatives in Europe: a Preliminary Analysis. Final Report to the EU Commission......Kristensen NH, Nielsen T, Bruselius-Jensen M, Scheperlen-Bøgh P, Beckie M, Foster C, Midmore P, Padel S (2002): The Organic Food Market and Marketing Initiatives in Europe: a Preliminary Analysis. Final Report to the EU Commission...

  6. Preliminary study on washability and composition analysis of highsulfur coal in some mining areas in Guizhou

    Institute of Scientific and Technical Information of China (English)

    QIU Yue-qin; MAO Song; ZHANG Qin; TIAN Ye; LIU Zhi-hong

    2011-01-01

    Preliminary sink-float experiments on high-sulfur coal was done in some mining areas and carried on elementary analysis, industrial analysis, and ashcontent analysis. Through the experiments, definite middlings, and gangue, the phase analysis of sulfur was carried on, by which a good understanding of sulfur characters in raw coal was achieved.

  7. Cusum charts for preliminary analysis of individual observations

    NARCIS (Netherlands)

    A.J. Koning (Alex); R.J.M.M. Does (Ronald)

    1997-01-01

    textabstractA preliminary Cusum chart based on individual observations is developed from the uniformly most powerful test for the detection of linear trends. This Cusum chart is compared with several of its competitors which are based on the likelihood ratio test and on transformations of standardiz

  8. Preliminary Functional-Structural Modeling on Poplar (Salicaceae)

    CERN Document Server

    Liu, Dongxiang; Letort, Véronique; Xing, Meijun; Gang, Yang; Huang, Xinyuan; Cao, Weiqun

    2010-01-01

    Poplar is one of the best fast-growing trees in the world, widely used for windbreak and wood product. Although architecture of poplar has direct impact on its applications, it has not been descried in previous poplar models, probably because of the difficulties raised by measurement, data processing and parameterization. In this paper, the functional-structural model GreenLab is calibrated by using poplar data of 3, 4, 5, 6 years old. The data was acquired by simplifying measurement. The architecture was also simplified by classifying the branches into several types (physiological age) using clustering analysis, which decrease the number of parameters. By multi-fitting the sampled data of each tree, the model parameters were identified and the plant architectures at different tree ages were simulated.

  9. Reactive Aggression and Suicide-Related Behaviors in Children and Adolescents: A Review and Preliminary Meta-Analysis.

    Science.gov (United States)

    Hartley, Chelsey M; Pettit, Jeremy W; Castellanos, Daniel

    2017-01-03

    The empirical literature on the association between reactive aggression and suicide-related behaviors in children and adolescents was reviewed. A narrative review of seven studies that met inclusion/exclusion criteria is followed by a preliminary meta-analysis to provide insight into the strength of the association between reactive aggression and suicide-related behaviors. Each of the seven studies reported a statistically significant association between reactive aggression and suicide-related behaviors, including suicide, nonfatal suicide attempt, and suicide ideation. Results from the meta-analysis indicated a consistent, medium-sized association (k = 7; N = 4,693; rbar = .25). The narrative review and results of the preliminary meta-analysis support the promise of pursuing future research on reactive aggression and suicide-related behaviors in children and adolescents. A theoretical model is proposed to guide the development of future research.

  10. Analysis of rainfall-induced shallow landslides in Jamne and Jaszcze stream valleys (Polish Carpathians – preliminary results

    Directory of Open Access Journals (Sweden)

    Zydroń Tymoteusz

    2016-03-01

    Full Text Available Analysis of rainfall-induced shallow landslides in Jamne and Jaszcze stream valleys (Polish Carpathians - preliminary results. Preliminary shallow landslide susceptibility mapping of the Jamne and Jaszcze stream valleys, located in the Polish Flysch Carpathians, is presented in the paper. For the purpose of mapping, there were used SINMAP and Iverson’s models integrating infiltration and slope stability calculations. The calibration of the used models parameters, obtained from limited field and laboratory tests, was performed using data from 8-9 July 1997, when as a consequence of a very intense rainfall, 94 shallow landslides were observed on meadows and arable lands. A comparison of the slope stability calculation results and the localisation of the noticed shallow landslides showed satisfactory agreement between localisation of the observed and computed unstable areas. However, it was concluded that better simulation results were obtained using Iverson’s model.

  11. The Cosparse Analysis Model and Algorithms

    CERN Document Server

    Nam, Sangnam; Elad, Michael; Gribonval, Rémi

    2011-01-01

    After a decade of extensive study of the sparse representation synthesis model, we can safely say that this is a mature and stable field, with clear theoretical foundations, and appealing applications. Alongside this approach, there is an analysis counterpart model, which, despite its similarity to the synthesis alternative, is markedly different. Surprisingly, the analysis model did not get a similar attention, and its understanding today is shallow and partial. In this paper we take a closer look at the analysis approach, better define it as a generative model for signals, and contrast it with the synthesis one. This work proposes effective pursuit methods that aim to solve inverse problems regularized with the analysis-model prior, accompanied by a preliminary theoretical study of their performance. We demonstrate the effectiveness of the analysis model in several experiments.

  12. Current Mooring Design in Partner WECs and Candidates for Preliminary Analysis

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    This report is the combined report of Commercial Milestone "CM1: Design and Cost of Current Mooring Solutions of Partner WECs" and Milestone "M3: Mooring Solutions for Preliminary Analysis" of the EUDP project "Mooring Solutions for Large Wave Energy Converters". The report covers a description...... of the current mooring design of the partner Wave Energy Converter (WEC) developers in the project, together with a preliminary cost estimate of the systems....

  13. The ATLAS Analysis Model

    CERN Multimedia

    Amir Farbin

    The ATLAS Analysis Model is a continually developing vision of how to reconcile physics analysis requirements with the ATLAS offline software and computing model constraints. In the past year this vision has influenced the evolution of the ATLAS Event Data Model, the Athena software framework, and physics analysis tools. These developments, along with the October Analysis Model Workshop and the planning for CSC analyses have led to a rapid refinement of the ATLAS Analysis Model in the past few months. This article introduces some of the relevant issues and presents the current vision of the future ATLAS Analysis Model. Event Data Model The ATLAS Event Data Model (EDM) consists of several levels of details, each targeted for a specific set of tasks. For example the Event Summary Data (ESD) stores calorimeter cells and tracking system hits thereby permitting many calibration and alignment tasks, but will be only accessible at particular computing sites with potentially large latency. In contrast, the Analysis...

  14. Simulating lightning into the RAMS model: implementation and preliminary results

    Directory of Open Access Journals (Sweden)

    S. Federico

    2014-05-01

    Full Text Available This paper shows the results of a tailored version of a previously published methodology, designed to simulate lightning activity, implemented into the Regional Atmospheric Modeling System (RAMS. The method gives the flash density at the resolution of the RAMS grid-scale allowing for a detailed analysis of the evolution of simulated lightning activity. The system is applied in detail to two case studies occurred over the Lazio Region, in Central Italy. Simulations are compared with the lightning activity detected by the LINET network. The cases refer to two thunderstorms of different intensity. Results show that the model predicts reasonably well both cases and that the lightning activity is well reproduced especially for the most intense case. However, there are errors in timing and positioning of the convection, whose magnitude depends on the case study, which mirrors in timing and positioning errors of the lightning distribution. To assess objectively the performance of the methodology, standard scores are presented for four additional case studies. Scores show the ability of the methodology to simulate the daily lightning activity for different spatial scales and for two different minimum thresholds of flash number density. The performance decreases at finer spatial scales and for higher thresholds. The comparison of simulated and observed lighting activity is an immediate and powerful tool to assess the model ability to reproduce the intensity and the evolution of the convection. This shows the importance of the use of computationally efficient lightning schemes, such as the one described in this paper, in forecast models.

  15. Preliminary Dynamic Siol-Structure-Interaction Analysis for the Waste Handling Building

    Energy Technology Data Exchange (ETDEWEB)

    G. Wagenblast

    2000-05-01

    The objective of this analysis package is to document a preliminary dynamic seismic evaluation of a simplified design concept of the Wade Handling Building (WHB). Preliminary seismic ground motions and soil data will be used. Loading criteria of the WHB System Design Description will be used. Detail design of structural members will not be performed.. The results of the analysis will be used to determine preliminary sizes of structural concrete and steel members and to determine whether the seismic response of the structure is within an acceptable level for future License Application design of safety related facilities. In order to complete this preliminary dynamic evaluation to meet the Site Recommendation (SR) schedule, the building configuration was ''frozen in time'' as the conceptual design existed in October 1999. Modular design features and dry or wet waste storage features were intentionally excluded from this preliminary dynamic seismic evaluation. The document was prepared in accordance with the Development Plan for the ''Preliminary/Dynamic Soil Structure Interaction Analysis for the Waste Handling Building'' (CRWMS M&O 2000b), which was completed, in accordance with AP-2.13Q, ''Technical Product Development Planning''.

  16. Thermal Hydraulic Analysis of K-DEMO Single Blanket Module for Preliminary Accident Analysis using MELCOR

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Sung Bo; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of)

    2016-05-15

    To develop the Korean fusion commercial reactor, preliminary design concept for K-DEMO (Korean fusion demonstration reactor) has been announced by NFRI (National Fusion Research Institute). This pre-conceptual study of K-DEMO has been introduced to identify technical details of a fusion power plant for the future commercialization of fusion reactor in Korea. Before this consideration, to build the K-DEMO, accident analysis is essential. Since the Fukushima accident, which is severe accident from unexpected disaster, safety analysis of nuclear power plant has become important. The safety analysis of both fission and fusion reactors is deemed crucial in demonstrating the low radiological effect of these reactors on the environment, during severe accidents. A risk analysis of K-DEMO should be performed, as a prerequisite for the construction of a fusion reactor. In this research, thermal-hydraulic analysis of single blanket module of K-DEMO is conducted for preliminary accident analysis for K-DEMO. Further study about effect of flow distributer is conducted. The normal K-DEMO operation condition is applied to the boundary condition and simulated to verify the material temperature limit using MELCOR. MELCOR is fully integrated, relatively fast-running code developed by Sandia National Laboratories. MELCOR had been used for Light Water Reactors and fusion reactor version of MELCOR was developed for ITER accident analysis. This study shows the result of thermal-hydraulic simulation of single blanket module with MELCOR which is severe accident code for nuclear fusion safety analysis. The difference of mass flow rate for each coolant channel with or without flow distributer is presented. With flow distributer, advantage of broadening temperature gradient in the K-DEMO blanket module and increase mass flow toward first wall is obtained. This can enhance the safety of K-DEMO blanket module. Most 13 .deg. C temperature difference in blanket module is obtained.

  17. A Preliminary Genetic Analysis of Complement 3 Gene and Schizophrenia.

    Directory of Open Access Journals (Sweden)

    Jianliang Ni

    Full Text Available Complement pathway activation was found to occur frequently in schizophrenia, and complement 3 (C3 plays a major role in this process. Previous studies have provided evidence for the possible role of C3 in the development of schizophrenia. In this study, we hypothesized that the gene encoding C3 (C3 may confer susceptibility to schizophrenia in Han Chinese. We analyzed 7 common single nucleotide polymorphisms (SNPs of C3 in 647 schizophrenia patients and 687 healthy controls. Peripheral C3 mRNA expression level was measured in 23 drug-naïve patients with schizophrenia and 24 controls. Two SNPs (rs1047286 and rs2250656 that deviated from Hardy-Weinberg equilibrium were excluded for further analysis. Among the remaining 5 SNPs, there was no significant difference in allele and genotype frequencies between the patient and control groups. Logistic regression analysis showed no significant SNP-gender interaction in either dominant model or recessive model. There was no significant difference in the level of peripheral C3 expression between the drug-naïve schizophrenia patients and healthy controls. In conclusion, the results of this study do not support C3 as a major genetic susceptibility factor in schizophrenia. Other factors in AP may have critical roles in schizophrenia and be worthy of further investigation.

  18. Preliminary analysis of knee stress in Full Extension Landing

    Directory of Open Access Journals (Sweden)

    Majid Davoodi Makinejad

    2013-09-01

    Full Text Available OBJECTIVE: This study provides an experimental and finite element analysis of knee-joint structure during extended-knee landing based on the extracted impact force, and it numerically identifies the contact pressure, stress distribution and possibility of bone-to-bone contact when a subject lands from a safe height. METHODS: The impact time and loads were measured via inverse dynamic analysis of free landing without knee flexion from three different heights (25, 50 and 75 cm, using five subjects with an average body mass index of 18.8. Three-dimensional data were developed from computed tomography scans and were reprocessed with modeling software before being imported and analyzed by finite element analysis software. The whole leg was considered to be a fixed middle-hinged structure, while impact loads were applied to the femur in an upward direction. RESULTS: Straight landing exerted an enormous amount of pressure on the knee joint as a result of the body's inability to utilize the lower extremity muscles, thereby maximizing the threat of injury when the load exceeds the height-safety threshold. CONCLUSIONS: The researchers conclude that extended-knee landing results in serious deformation of the meniscus and cartilage and increases the risk of bone-to-bone contact and serious knee injury when the load exceeds the threshold safety height. This risk is considerably greater than the risk of injury associated with walking downhill or flexion landing activities.

  19. Preliminary Analysis of a Fully Solid State Magnetocaloric Refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    Abdelaziz, Omar [ORNL

    2016-01-01

    Magnetocaloric refrigeration is an alternative refrigeration technology with significant potential energy savings compared to conventional vapor compression refrigeration technology. Most of the reported active magnetic regenerator (AMR) systems that operate based on the magnetocaloric effect use heat transfer fluid to exchange heat, which results in complicated mechanical subsystems and components such as rotating valves and hydraulic pumps. In this paper, we propose an alternative mechanism for heat transfer between the AMR and the heat source/sink. High-conductivity moving rods/sheets (e.g. copper, brass, iron, graphite, aluminum or composite structures from these) are utilized instead of heat transfer fluid significantly enhancing the heat transfer rate hence cooling/heating capacity. A one-dimensional model is developed to study the solid state AMR. In this model, the heat exchange between the solid-solid interfaces is modeled via a contact conductance, which depends on the interface apparent pressure, material hardness, thermal conductivity, surface roughness, surface slope between the interfaces, and material filled in the gap between the interfaces. Due to the tremendous impact of the heat exchange on the AMR cycle performance, a sensitivity analysis is conducted employing a response surface method, in which the apparent pressure, effective surface roughness and grease thermal conductivity are the uncertainty factors. COP and refrigeration capacity are presented as the response in the sensitivity analysis to reveal the important factors influencing the fully solid state AMR and optimize the solid state AMR efficiency. The performances of fully solid state AMR and traditional AMR are also compared and discussed in present work. The results of this study will provide general guidelines for designing high performance solid state AMR systems.

  20. Cusum charts for preliminary analysis of individual observations

    OpenAIRE

    1997-01-01

    textabstractA preliminary Cusum chart based on individual observations is developed from the uniformly most powerful test for the detection of linear trends. This Cusum chart is compared with several of its competitors which are based on the likelihood ratio test and on transformations of standardized recursive residuals on which for instance the Q-chart methodology is based. It turns out that the new proposed Cusum chart is not only superior in the detection of linear trend out-of-control co...

  1. Grid-connected ICES preliminary feasibility analysis and evaluation. Final report. Volume I. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    1977-06-30

    A group of hospitals, clinics, research facilities, and medical education facilities, known as the HEAL Complex, was chosen as the site (in New Orleans) for the demonstration of a Grid-Connected Integrated Community Energy System (ICES). The contract work included a preliminary energy supply/demand assessment of the Demonstration Community, a preliminary feasibility analysis and conceptual design of a candidate Demonstration System, preliminary assessment of institutional factors, preparation of a detailed work management plan for subsequent phases of the demonstration program, firming-up of commitments from participating parties, and reporting thereon. This Phase I study has indicated that a central ICES plant producing steam, chilled water, and by-product electricity to serve the HEAL Complex is technically and economically feasible to the extent that Phase II, Detailed Feasibility and Preliminary Design, should be implemented. (MCW)

  2. Preliminary characterization and modeling of SMA-based textile composites

    Science.gov (United States)

    Masuda, Arata; Ni, Qing-Qing; Sone, Akira; Zhang, Run-Xin; Yamamura, Takahiko

    2004-07-01

    In this paper, we conduct a feasibility study to investigate the future potential of textile composites with shape memory alloys. Two different types of SMA-based textile composites are presented. First, a composite plate with embedded woven SMA layer is fabricated, and the stiffness tuning capability is evaluated by impact vibration tests. The results are not favorable, but may be improved by increasing the volume fraction of SMA, and by controlling the prestrain more accurately during the lamination process. The modeling and analysis methodology for woven SMA-based composites are briefly discussed. Then, the possibility of textile composites with SMA stitching is discussed, that is expected to give the composites multi-functions such as tunable stiffness, shape control and sensing capability, selectively distributed on demand.

  3. Preliminary Drop Time Analysis of a Control Rod Using CFD Code

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myoung Hwan; Park, Jin Seok; Lee, Won Jae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Jun Hong [SEST Co., Seoul (Korea, Republic of)

    2010-05-15

    A control rod drive mechanism (CRDM) is a reactor regulating system, which can insert and withdraw a control rod containing a neutron absorbing material to control the reactivity of the reactor core. The latch type CRDM for the SMART (System-integrated Modular Advanced ReacTor) is going to be used. The drop time of the control rod in the design stage is one of important parameters for a safety analysis of the reactor. When the control rod is falling down into the core, it is retarded by various forces acting on it such as fluid resistance buoyancy and mechanical friction caused by contacting the inner surface of the guide thimble, etc.. However, complicated coupling of the various forces makes it difficult to predict the drop behavior. This paper describes the development of the 3D CFD analysis model using a FLUENT code. The single control rod of the Westinghouse 17x17 type optimized fuel assembly (W-OFA) was considered for the verification of the CFD model. A preliminary drop time analysis for the SMART with the simulated control rod was performed

  4. Turbine Fuels from Tar Sands Bitumen and Heavy Oil. Phase I. Preliminary Process Analysis.

    Science.gov (United States)

    1985-04-09

    Process Analysis A. F. Talbot. V. Elanchenny, L. H. Finkel, A. Macris and 3. P. Schwedock Sun Tech, Inc., A Subsidiary of Sun Co. P. 0. Box 1135 Marcus Hook...investigation be carried out in three discrete phases, as described below: Phase I - Preliminary process analysis includes an eval- uation of the potential of

  5. A Preliminary Study on Gender Differences in Studying Systems Analysis and Design

    Science.gov (United States)

    Lee, Fion S. L.; Wong, Kelvin C. K.

    2017-01-01

    Systems analysis and design is a crucial task in system development and is included in a typical information systems programme as a core course. This paper presented a preliminary study on gender differences in studying a systems analysis and design course of an undergraduate programme. Results indicated that male students outperformed female…

  6. Preliminary analysis of electromagnetic pulse generated by nuclear explosions in space with case signal model%深空核爆炸辐射电磁脉冲的初步解析

    Institute of Scientific and Technical Information of China (English)

    朱梦; 周辉; 程引会; 李宝忠; 吴伟; 李进玺; 马良; 赵墨

    2011-01-01

    A preliminary understanding of electromagnetic pulse generated by nuclear explosions in space has been developed with case signal model. For observers in large distances, a net dipole can be resulted from the average movements of space charges. Based on the law of electron movements, the electric dipole moment of the whole system has been analytically described. The radiation fields are closely related to the derivatives of the dipole moment with time. The peak value of radiation signal in far field increases linearly with the initial kinetic energies of electrons, and quadratically with the radius of bomb and with the rise time constant. The peak is irrelevant to explosion yield, while the peak time will be postponed as the yield decreases.%采用壳模型分析深空核爆在远场产生辐射电磁脉冲的规律,对深空核爆电磁脉冲的形成机理进行研究.在已知电子运动规律的前提下,推导了发射电子的电偶极矩表达式,并得到了辐射电磁脉冲的特性.计算结果表明:远处辐射场的峰值电场与爆炸当量无关,但达到峰值的时间随爆炸当量增加而提前;电子初始动能的增大也能线性地提高峰值强度;峰值强度与上升时间常数及弹体半径的平方成正比.

  7. Preliminary Rock Physics Analysis on Lodgepole Formation in Manitoba, Canada

    Science.gov (United States)

    Kim, N.; Keehm, Y.

    2012-12-01

    We present rock physics analysis results of Lodgepole Formation, a carbonate reservoir in Daly Field, Manitoba, Canada. We confirmed that the Lodgepole Formation can be divided into six units in the study area: Basal Limestone, Cromer Shale, Cruickshank Crinoidal, Cruickshank Shale, Daly member and Flossie Lake member from the bottom, using eight well log data and previous works. We then performed rock physics analyses on four carbonate units (Basal Limestone, Cruickshank Crinoidal, Daly and Flossie Lake), such as Vp-porosity, AI-porosity, DEM (differential effective medium) modeling, and fluid substitution analysis. In Vp-porosity domain, the top unit, Flossie Lake member has lower porosity and higher velocity, while the other units show similar porosity and velocity. We think that this results from the diagenesis of Flossie Lake member since it bounds with unconformity. However, the four units show very similar trend in Vp-porosity domain, and we can report one Vp-porosity relation for all carbonate units of the Lodgepole formation. We also found that the acoustic impedance varies more than 10% from low porosity zone (3-6%) to high porosity zone (9-12%) from AI-porosity analysis. Thus one can delineate high porosity zone from seismic impedance data. DEM modeling showed that Flossie Lake would have relatively low aspect ratio of pores than the others, which implies that the top unit has been influenced by diagenesis. To determine fluid sensitivity of carbonate units, we conducted fluid substitution on four units from 100% water to 100% oil. The top unit, Flossie Lake, showed slight increase of Vp, which seems to be density effect. The others showed small decrease of Vp, but not significant. If we observe Vp/Vs rather than Vp, the sensitivity increases. However, fluid discrimination would be difficult because of high stiffness of rock frame. In summary, three lower carbonate units of Lodgepole Formation would be prospective and high porosity zone can be delineated

  8. Preliminary study of the Gravimetric Local Geoid Model in Jordan: case study (GeoJordan Model

    Directory of Open Access Journals (Sweden)

    A. Al-Zoubi

    2007-06-01

    Full Text Available Recently, there has been an increased interest in studying and defining the Local and Regional Geoid Model worldwide, due to its importance in geodetic and geophysics applications.The use of the Global Positioning System (GPS is internationally growing, yet the lack of a Geoid Model for Jordan has limited the use of GPS for the geodetic applications in the country. This work aims to present the preliminary results that we propose for «The Gravimetric Jordanian Geoid Model (GeoJordan». The model is created using gravimetric data and the GRAVSOFT program. The model is validated using GPS and precise level measurements in the Amman area. Moreover, we present a comparison using the Global Geopotential Model OSU91A and the EGM96 Model and the results showed great discrepancies. We also present the approach used to obtain the orthometric height from GPS ellipsoidal height measurements. We found that the error margin obtained in this work of the GeoJordan after fitting the data with GPS/leveling measurements is about (10 cm in the tested area whereas the standard error of the created model is about (40 cm.

  9. RISK ANALYSIS DEVELOPED MODEL

    Directory of Open Access Journals (Sweden)

    Georgiana Cristina NUKINA

    2012-07-01

    Full Text Available Through Risk analysis developed model deciding whether control measures suitable for implementation. However, the analysis determines whether the benefits of a data control options cost more than the implementation.

  10. Preliminary design package for Sunair SEC-601 solar collector

    Science.gov (United States)

    1978-01-01

    The preliminary design of the Owens-Illinois model Sunair SEC-601 tubular air solar collector is presented. Information in this package includes the subsystem design and development approaches, hazard analysis, and detailed drawings available as the preliminary design review.

  11. Preliminary Design and Analysis of the GIFTS Instrument Pointing System

    Science.gov (United States)

    Zomkowski, Paul P.

    2003-01-01

    The Geosynchronous Imaging Fourier Transform Spectrometer (GIFTS) Instrument is the next generation spectrometer for remote sensing weather satellites. The GIFTS instrument will be used to perform scans of the Earth s atmosphere by assembling a series of field-of- views (FOV) into a larger pattern. Realization of this process is achieved by step scanning the instrument FOV in a contiguous fashion across any desired portion of the visible Earth. A 2.3 arc second pointing stability, with respect to the scanning instrument, must be maintained for the duration of the FOV scan. A star tracker producing attitude data at 100 Hz rate will be used by the autonomous pointing algorithm to precisely track target FOV s on the surface of the Earth. The main objective is to validate the pointing algorithm in the presence of spacecraft disturbances and determine acceptable disturbance limits from expected noise sources. Proof of concept validation of the pointing system algorithm is carried out with a full system simulation developed using Matlab Simulink. Models for the following components function within the full system simulation: inertial reference unit (IRU), attitude control system (ACS), reaction wheels, star tracker, and mirror controller. With the spacecraft orbital position and attitude maintained to within specified limits the pointing algorithm receives quaternion, ephemeris, and initialization data that are used to construct the required mirror pointing commands at a 100 Hz rate. This comprehensive simulation will also aid in obtaining a thorough understanding of spacecraft disturbances and other sources of pointing system errors. Parameter sensitivity studies and disturbance analysis will be used to obtain limits of operability for the GIFTS instrument. The culmination of this simulation development and analysis will be used to validate the specified performance requirements outlined for this instrument.

  12. A Preliminary Tsunami Vulnerability Analysis for Yenikapi Region in Istanbul

    Science.gov (United States)

    Ceren Cankaya, Zeynep; Suzen, Lutfi; Cevdet Yalciner, Ahmet; Kolat, Cagil; Aytore, Betul; Zaytsev, Andrey

    2015-04-01

    One of the main requirements during post disaster recovery operations is to maintain proper transportation and fluent communication at the disaster areas. Ports and harbors are the main transportation hubs which must work with proper performance at all times especially after the disasters. Resilience of coastal utilities after earthquakes and tsunamis have major importance for efficient and proper rescue and recovery operations soon after the disasters. Istanbul is a mega city with its various coastal utilities located at the north coast of the Sea of Marmara. At Yenikapi region of Istanbul, there are critical coastal utilities and vulnerable coastal structures and critical activities occur daily. Fishery ports, commercial ports, small craft harbors, passenger terminals of intercity maritime transportation, water front commercial and/or recreational structures are some of the examples of coastal utilization which are vulnerable against marine disasters. Therefore their vulnerability under tsunami or any other marine hazard to Yenikapi region of Istanbul is an important issue. In this study, a methodology of vulnerability analysis under tsunami attack is proposed with the applications to Yenikapi region. In the study, high resolution (1m) GIS database of Istanbul Metropolitan Municipality (IMM) is used and analyzed by using GIS implementation. The bathymetry and topography database and the vector dataset containing all buildings/structures/infrastructures in the study area are obtained for tsunami numerical modeling for the study area. GIS based tsunami vulnerability assessment is conducted by applying the Multi-criteria Decision Making Analysis (MCDA). The tsunami parameters from deterministically defined worst case scenarios are computed from the simulations using tsunami numerical model NAMI DANCE. The vulnerability parameters in the region due to two different classifications i) vulnerability of buildings/structures and ii) vulnerability of (human) evacuation

  13. Preliminary Results from Electric Arc Furnace Off-Gas Enthalpy Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Nimbalkar, Sachin U [ORNL; Thekdi, Arvind [E3M Inc; Keiser, James R [ORNL; Storey, John Morse [ORNL

    2015-01-01

    This article describes electric arc furnace (EAF) off-gas enthalpy models developed at Oak Ridge National Laboratory (ORNL) to calculate overall heat availability (sensible and chemical enthalpy) and recoverable heat values (steam or power generation potential) for existing EAF operations and to test ORNL s new EAF waste heat recovery (WHR) concepts. ORNL s new EAF WHR concepts are: Regenerative Drop-out Box System and Fluidized Bed System. The two EAF off-gas enthalpy models described in this paper are: 1.Overall Waste Heat Recovery Model that calculates total heat availability in off-gases of existing EAF operations 2.Regenerative Drop-out Box System Model in which hot EAF off-gases alternately pass through one of two refractory heat sinks that store heat and then transfer it to another gaseous medium These models calculate the sensible and chemical enthalpy of EAF off-gases based on the off-gas chemical composition, temperature, and mass flow rate during tap to tap time, and variations in those parameters in terms of actual values over time. The models provide heat transfer analysis for the aforementioned concepts to confirm the overall system and major component sizing (preliminary) to assess the practicality of the systems. Real-time EAF off-gas composition (e.g., CO, CO2, H2, and H2O), volume flow, and temperature data from one EAF operation was used to test the validity and accuracy of the modeling work. The EAF off-gas data was used to calculate the sensible and chemical enthalpy of the EAF off-gases to generate steam and power. The article provides detailed results from the modeling work that are important to the success of ORNL s EAF WHR project. The EAF WHR project aims to develop and test new concepts and materials that allow cost-effective recovery of sensible and chemical heat from high-temperature gases discharged from EAFs.

  14. Preliminary insights into a model for mafic magma fragmentation

    Science.gov (United States)

    Edwards, Matt; Pioli, Laura; Andronico, Daniele; Cristaldi, Antonio; Scollo, Simona

    2017-04-01

    Fragmentation of mafic magmas remains a poorly understood process despite the common occurrence of low viscosity explosive eruptions. In fact, it has been commonly overlooked based on the assumption that low viscosity magmas have very limited explosivity and low potential to undergo brittle fragmentation. However, it is now known that highly explosive, ash forming eruptions can be relatively frequent at several mafic volcanoes. Three questions arise due to this - What is the specific fragmentation mechanism occuring in these eruptions? What are the primary factors controlling fragmentation efficiency? Can a link between eruption style and fragmentation efficiency be quantified? We addressed these questions by coupling theoretical observations and field analysis of the recent May 2016 eruption at Mount Etna volcano. Within this complex 10-day event three paroxysmal episodes of pulsating basaltic lava jets alternating with small lava flows were recorded from a vent within the Voragine crater. The associated plumes which were produced deposited tephra along narrow axes to the east and south east. Sampling was done on the deposits associated with the first two plumes and the third one. We briefly characterise the May 2016 eruption by assessing plume height, eruption phases, total erupted masses and fallout boundaries and comparing them to previous eruptions. We also analyse the total grainsize distribution (TGSD) of the scoria particles formed in the jets. Conventional methods for obtaining grainsize and total distributions of an eruption are based on mass and provide limited information on fragmentation though. For this reason, the TGSD was assessed by coupling particle analyser data and conventional sieving data to assess both particle size and number of particle distributions with better precision. This allowed for more accurate testing of several existing models describing the shape of the TGSD. Coupled further with observations on eruption dynamics and eruption

  15. Preliminary Thermal Hydraulic Analyses of the Conceptual Core Models with Tubular Type Fuel Assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Chae, Hee Taek; Park, Jong Hark; Park, Cheol

    2006-11-15

    A new research reactor (AHR, Advanced HANARO Reactor) based on the HANARO has being conceptually developed for the future needs of research reactors. A tubular type fuel was considered as one of the fuel options of the AHR. A tubular type fuel assembly has several curved fuel plates arranged with a constant small gap to build up cooling channels, which is very similar to an annulus pipe with many layers. This report presents the preliminary analysis of thermal hydraulic characteristics and safety margins for three conceptual core models using tubular fuel assemblies. Four design criteria, which are the fuel temperature, ONB (Onset of Nucleate Boiling) margin, minimum DNBR (Departure from Nucleate Boiling Ratio) and OFIR (Onset of Flow Instability Ratio), were investigated along with various core flow velocities in the normal operating conditions. And the primary coolant flow rate based a conceptual core model was suggested as a design information for the process design of the primary cooling system. The computational fluid dynamics analysis was also carried out to evaluate the coolant velocity distributions between tubular channels and the pressure drop characteristics of the tubular fuel assembly.

  16. A simplified procedure of linear regression in a preliminary analysis

    Directory of Open Access Journals (Sweden)

    Silvia Facchinetti

    2013-05-01

    Full Text Available The analysis of a statistical large data-set can be led by the study of a particularly interesting variable Y – regressed – and an explicative variable X, chosen among the remained variables, conjointly observed. The study gives a simplified procedure to obtain the functional link of the variables y=y(x by a partition of the data-set into m subsets, in which the observations are synthesized by location indices (mean or median of X and Y. Polynomial models for y(x of order r are considered to verify the characteristics of the given procedure, in particular we assume r= 1 and 2. The distributions of the parameter estimators are obtained by simulation, when the fitting is done for m= r + 1. Comparisons of the results, in terms of distribution and efficiency, are made with the results obtained by the ordinary least square methods. The study also gives some considerations on the consistency of the estimated parameters obtained by the given procedure.

  17. Thick Concrete Specimen Construction, Testing, and Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, Dwight A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hoegh, Kyle [Univ. of Minnesota, Minneapolis, MN (United States); Khazanovich, Lev [Univ. of Minnesota, Minneapolis, MN (United States)

    2015-03-01

    The purpose of the U.S. Department of Energy Office of Nuclear Energy’s Light Water Reactor Sustainability (LWRS) Program is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the operating lifetimes of nuclear power plants (NPPs) beyond 60 years. Since many important safety structures in an NPP are constructed of concrete, inspection techniques must be developed and tested to evaluate the internal condition. In-service containment structures generally do not allow for the destructive measures necessary to validate the accuracy of these inspection techniques. This creates a need for comparative testing of the various nondestructive evaluation (NDE) measurement techniques on concrete specimens with known material properties, voids, internal microstructure flaws, and reinforcement locations. A preliminary report detailed some of the challenges associated with thick reinforced concrete sections and prioritized conceptual designs of specimens that could be fabricated to represent NPP concrete structures for using in NDE evaluation comparisons. This led to the construction of the concrete specimen presented in this report, which has sufficient reinforcement density and cross-sectional size to represent an NPP containment wall. Details on how a suitably thick concrete specimen was constructed are presented, including the construction materials, final nominal design schematic, as well as formwork and rigging required to safely meet the desired dimensions of the concrete structure. The report also details the type and methods of forming the concrete specimen as well as information on how the rebar and simulated defects were embedded. Details on how the resulting specimen was transported, safely anchored, and marked to allow access for systematic comparative NDE testing of defects in a representative NPP containment wall concrete specimen are also given. Data collection using the MIRA Ultrasonic NDE equipment and

  18. Preliminary uncertainty analysis of OECD/UAM benchmark for the TMI-1 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, Fabiano S.; Faria, Rochkhudson B.; Silva, Lucas M.C.; Pereira, Claubia; Fortini, Angela, E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear

    2015-07-01

    Nowadays the demand from nuclear research centers for safety, regulation and better-estimated predictions provided with confidence bounds has been increasing. On that way, studies have pointed out that present uncertainties in the nuclear data should be significantly reduced, to get the full benefit from the advanced modeling and simulation initiatives. The major outcome of NEA/OECD (UAM) workshop took place Italy on 2006, was the preparation of a benchmark work program with steps (exercises) that would be needed to define the uncertainty and modeling tasks. On that direction, this work was performed within the framework of UAM Exercise 1 (I-1) 'Cell Physics' to validate the study, and to be able estimated the accuracies of the model. The objectives of this study were to make a preliminary analysis of criticality values of TMI-1 PWR and the biases of the results from two different nuclear codes multiplication factor. The range of the bias was obtained using the deterministic codes: NEWT (New ESC-based Weighting Transport code), the two-dimensional transport module that uses AMPX-formatted cross-sections processed by other SCALE; and WIMSD5 (Winfrith Improved Multi-Group Scheme) code. The WIMSD5 system consists of a simplified geometric representation of heterogeneous space zones that are coupled with each other and with the boundaries, while the properties of each spacing element are obtained from Carlson DSN method or Collision Probability method. (author)

  19. Preliminary Coupling of MATRA Code for Multi-physics Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seongjin; Choi, Jinyoung; Yang, Yongsik; Kwon, Hyouk; Hwang, Daehyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The boundary conditions such as the inlet temperature, mass flux, averaged heat flux, power distributions of the rods, and core geometry is given by constant values or functions of time. These conditions are separately calculated and provided by other codes, such as a neutronics or a system codes, into the MATRA code. In addition, the coupling of several codes in the different physics field is focused and embodied. In this study, multiphysics coupling methods were developed for a subchannel code (MATRA) with neutronics codes (MASTER, DeCART) and a fuel performance code (FRAPCON-3). Preliminary evaluation results for representative sample cases are presented. The MASTER and DeCART codes provide the power distribution of the rods in the core to the MATRA code. In case of the FRAPCON-3 code, the variation of the rod diameter induced by the thermal expansion is yielded and provided. The MATRA code transfers the thermal-hydraulic conditions that each code needs. Moreover, the coupling method with each code is described.

  20. Laboratory Investigations on Estuary Salinity Mixing: Preliminary Analysis

    Directory of Open Access Journals (Sweden)

    F. H. Nuryazmeen

    2014-05-01

    Full Text Available Estuaries are bodies of water along the coasts that are formed when fresh water from rivers flows into and mixes with salt water from the ocean. The estuaries serve as a habitat to some aquatic lives, including mangroves. Human-induced activities such as dredging of shipping lanes along the bottom estuarine, the disposal of industrial wastes into the water system and shoreline development influence estuarine dynamics which include mixing process. These activities might contribute to salinity changes and further adversely affect the estuarine ecosystem. In order to study at the characteristics of the mixing between salt water (estuary and freshwater (river, a preliminary investigation had been done in the laboratory. Fresh water was released from one end of the flume and overflowing at weir at the other end. Meanwhile, salt water was represented by the red dye tracer released through a weir and intruded upstream as a gravity current. The isohalines are plotted to see the salinity patterns. Besides, to examine the spatial and temporal salinity profiles along the laboratory investigations, the plotted graphs have been made. The results show that the changes in salinity level along the flume due to mixing between fresh water and salt water. This showed typical salt-wedge estuary characteristics.

  1. A Preliminary Analysis of Precipitation Properties and Processes during NASA GPM IFloodS

    Science.gov (United States)

    Carey, Lawrence; Gatlin, Patrick; Petersen, Walt; Wingo, Matt; Lang, Timothy; Wolff, Dave

    2014-01-01

    The Iowa Flood Studies (IFloodS) is a NASA Global Precipitation Measurement (GPM) ground measurement campaign, which took place in eastern Iowa from May 1 to June 15, 2013. The goals of the field campaign were to collect detailed measurements of surface precipitation using ground instruments and advanced weather radars while simultaneously collecting data from satellites passing overhead. Data collected by the radars and other ground instruments, such as disdrometers and rain gauges, will be used to characterize precipitation properties throughout the vertical column, including the precipitation type (e.g., rain, graupel, hail, aggregates, ice crystals), precipitation amounts (e.g., rain rate), and the size and shape of raindrops. The impact of physical processes, such as aggregation, melting, breakup and coalescence on the measured liquid and ice precipitation properties will be investigated. These ground observations will ultimately be used to improve rainfall estimates from satellites and in particular the algorithms that interpret raw data for the upcoming GPM mission's Core Observatory satellite, which launches in 2014. The various precipitation data collected will eventually be used as input to flood forecasting models in an effort to improve capabilities and test the utility and limitations of satellite precipitation data for flood forecasting. In this preliminary study, the focus will be on analysis of NASA NPOL (S-band, polarimetric) radar (e.g., radar reflectivity, differential reflectivity, differential phase, correlation coefficient) and NASA 2D Video Disdrometers (2DVDs) measurements. Quality control and processing of the radar and disdrometer data sets will be outlined. In analyzing preliminary cases, particular emphasis will be placed on 1) documenting the evolution of the rain drop size distribution (DSD) as a function of column melting processes and 2) assessing the impact of range on ground-based polarimetric radar estimates of DSD properties.

  2. QSAR models for anti-androgenic effect - a preliminary study

    DEFF Research Database (Denmark)

    Jensen, Gunde Egeskov; Nikolov, Nikolai Georgiev; Wedebye, Eva Bay;

    2011-01-01

    of the model for a particular application, balance of training sets, domain definition, and cut-offs for prediction interpretation should also be taken into account. Different descriptors in the modelling systems are illustrated with hydroxyflutamide and dexamethasone as examples (a non-steroid and a steroid......Three modelling systems (MultiCase (R), LeadScope (R) and MDL (R) QSAR) were used for construction of androgenic receptor antagonist models. There were 923-942 chemicals in the training sets. The models were cross-validated (leave-groups-out) with concordances of 77-81%, specificity of 78...

  3. Preliminary Modeling and Simulation Study on Olfactory Cell Sensation

    Science.gov (United States)

    Zhou, Jun; Yang, Wei; Chen, Peihua; Liu, Qingjun; Wang, Ping

    2009-05-01

    This paper introduced olfactory sensory neuron's whole-cell model with a concrete voltage-gated ionic channels and simulation. Though there are many models in olfactory sensory neuron and olfactory bulb, it remains uncertain how they express the logic of olfactory information processing. In this article, the olfactory neural network model is also introduced. This model specifies the connections among neural ensembles of the olfactory system. The simulation results of the neural network model are consistent with the observed olfactory biological characteristics such as 1/f-type power spectrum and oscillations.

  4. Preliminary Analysis of a Novel SAR Based Emergency System for Earth Orbit Satellites using Galileo

    NARCIS (Netherlands)

    Gill, E.K.A.; Helderweirt, A.

    2010-01-01

    This paper presents a preliminary analysis of a novel Search and Rescue (SAR) based emergency system for Low Earth Orbit (LEO) satellites using the Galileo Global Navigation Satellite System (GNSS). It starts with a description of the space user SAR system including a concept description, mission ar

  5. ANSI/ASHRAE/IES Standard 90.1-2013 Preliminary Determination: Quantitative Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, Mark A.; Rosenberg, Michael I.; Wang, Weimin; Zhang, Jian; Mendon, Vrushali V.; Athalye, Rahul A.; Xie, YuLong; Hart, Reid; Goel, Supriya

    2014-03-01

    This report provides a preliminary quantitative analysis to assess whether buildings constructed according to the requirements of ANSI/ASHRAE/IES Standard 90.1-2013 would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IES Standard 90.1-2010.

  6. Preliminary Analysis of the Oklahoma Wavefields Demonstration Dataset

    Science.gov (United States)

    Anderson, K. R.; Sweet, J. R.; Woodward, R.; Karplus, M. S.; DeShon, H. R.; Magnani, M. B.; Hayward, C.; Langston, C. A.

    2016-12-01

    In June 2016, a field crew of 50 students, faculty, industry personnel and IRIS staff deployed a total of 390 stations as part of a community seismic experiment above an active seismic lineament in north-central Oklahoma. The goals of the experiment were to test new instrumentation and deployment strategies that record the full wavefield, and to advance understanding of earthquake source processes and regional lithospheric structure. The crew deployed 363 3C 4.5Hz Generation 2 Fairfield Z-Land nodes along three seismic lines and in a seven-layer nested gradiometer array. The seismic lines spanned a region 13 km long by 5 km wide. The nested gradiometer was designed to measure the full seismic wavefield using standard frequency-wavenumber techniques and spatial wave gradients. A broadband, 18 station "Golay 3x6" array was deployed around the gradiometer and seismic lines with an aperture of approximately 5 km to collect waveform data from local and regional events. In addition, 9 infrasound stations were deployed in order to capture and identify acoustic events that might be recorded by the seismic arrays and to quantify the wind acoustic noise effect on co-located broadband stations. The variety of instrumentation used in this deployment was chosen to capture the full seismic wavefield generated by the local and regional seismicity beneath the array and the surrounding region. We present preliminary results from the data collected during the experiment. We analyze the level of signal coherence observed across the nested gradiometer and Golay array as well as array design fidelity. We report on data quality, including completeness and noise levels, for the various types of instrumentation. We also examine the performance of co-located surface and buried nodes to determine the benefits of each installation type. Finally, we present performance comparisons between co-located nodes and broadband stations and compare these results to prior wavefield/large-N deployments

  7. Preliminary analysis techniques for ring and stringer stiffened cylindrical shells

    Science.gov (United States)

    Graham, J.

    1993-03-01

    This report outlines methods of analysis for the buckling of thin-walled circumferentially and longitudinally stiffened cylindrical shells. Methods of analysis for the various failure modes are presented in one cohesive package. Where applicable, more than one method of analysis for a failure mode is presented along with standard practices. The results of this report are primarily intended for use in launch vehicle design in the elastic range. A Microsoft Excel worksheet with accompanying macros has been developed to automate the analysis procedures.

  8. Preliminary clinical nursing leadership competency model: a qualitative study from Thailand.

    Science.gov (United States)

    Supamanee, Treeyaphan; Krairiksh, Marisa; Singhakhumfu, Laddawan; Turale, Sue

    2011-12-01

    This qualitative study explored the clinical nursing leadership competency perspectives of Thai nurses working in a university hospital. To collect data, in-depth interviews were undertaken with 23 nurse administrators, and focus groups were used with 31 registered nurses. Data were analyzed using content analysis, and theory development was guided by the Iceberg model. Nurses' clinical leadership competencies emerged, comprising hidden characteristics and surface characteristics. The hidden characteristics composed three elements: motive (respect from the nursing and healthcare team and being secure in life), self-concept (representing positive attitudes and values), and traits (personal qualities necessary for leadership). The surface characteristics comprised specific knowledge of nurse leaders about clinical leadership, management and nursing informatics, and clinical skills, such as coordination, effective communication, problem solving, and clinical decision-making. The study findings help nursing to gain greater knowledge of the essence of clinical nursing leadership competencies, a matter critical for theory development in leadership. This study's results later led to the instigation of a training program for registered nurse leaders at the study site, and the formation of a preliminary clinical nursing leadership competency model.

  9. Modeling and Testing of EVs - Preliminary Study and Laboratory Development

    DEFF Research Database (Denmark)

    Yang, Guang-Ya; Marra, Francesco; Nielsen, Arne Hejde;

    2010-01-01

    Electric vehicles (EVs) are expected to play a key role in the future energy management system to stabilize both supply and consumption with the presence of high penetration of renewable generation. A reasonably accurate model of battery is a key element for the study of EVs behavior and the grid...... tests, followed by the suggestions towards a feasible battery model for further studies....

  10. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-01-18

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program (The Program). The analysis is a task by Princeton Energy Resources International, LLC, in support of the National Renewable Energy Laboratory on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE).

  11. First fungal genome sequence from Africa: A preliminary analysis

    Directory of Open Access Journals (Sweden)

    Rene Sutherland

    2012-01-01

    Full Text Available Some of the most significant breakthroughs in the biological sciences this century will emerge from the development of next generation sequencing technologies. The ease of availability of DNA sequence made possible through these new technologies has given researchers opportunities to study organisms in a manner that was not possible with Sanger sequencing. Scientists will, therefore, need to embrace genomics, as well as develop and nurture the human capacity to sequence genomes and utilise the ’tsunami‘ of data that emerge from genome sequencing. In response to these challenges, we sequenced the genome of Fusarium circinatum, a fungal pathogen of pine that causes pitch canker, a disease of great concern to the South African forestry industry. The sequencing work was conducted in South Africa, making F. circinatum the first eukaryotic organism for which the complete genome has been sequenced locally. Here we report on the process that was followed to sequence, assemble and perform a preliminary characterisation of the genome. Furthermore, details of the computer annotation and manual curation of this genome are presented. The F. circinatum genome was found to be nearly 44 million bases in size, which is similar to that of four other Fusarium genomes that have been sequenced elsewhere. The genome contains just over 15 000 open reading frames, which is less than that of the related species, Fusarium oxysporum, but more than that for Fusarium verticillioides. Amongst the various putative gene clusters identified in F. circinatum, those encoding the secondary metabolites fumosin and fusarin appeared to harbour evidence of gene translocation. It is anticipated that similar comparisons of other loci will provide insights into the genetic basis for pathogenicity of the pitch canker pathogen. Perhaps more importantly, this project has engaged a relatively large group of scientists

  12. Wave-current interactions: model development and preliminary results

    Science.gov (United States)

    Mayet, Clement; Lyard, Florent; Ardhuin, Fabrice

    2013-04-01

    The coastal area concentrates many uses that require integrated management based on diagnostic and predictive tools to understand and anticipate the future of pollution from land or sea, and learn more about natural hazards at sea or activity on the coast. The realistic modelling of coastal hydrodynamics needs to take into account various processes which interact, including tides, surges, and sea state (Wolf [2008]). These processes act at different spatial scales. Unstructured-grid models have shown the ability to satisfy these needs, given that a good mesh resolution criterion is used. We worked on adding a sea state forcing in a hydrodynamic circulation model. The sea state model is the unstructured version of WAVEWATCH III c (Tolman [2008]) (which version is developed at IFREMER, Brest (Ardhuin et al. [2010]) ), and the hydrodynamic model is the 2D barotropic module of the unstructured-grid finite element model T-UGOm (Le Bars et al. [2010]). We chose to use the radiation stress approach (Longuet-Higgins and Stewart [1964]) to represent the effect of surface waves (wind waves and swell) in the barotropic model, as previously done by Mastenbroek et al. [1993]and others. We present here some validation of the model against academic cases : a 2D plane beach (Haas and Warner [2009]) and a simple bathymetric step with analytic solution for waves (Ardhuin et al. [2008]). In a second part we present realistic application in the Ushant Sea during extreme event. References Ardhuin, F., N. Rascle, and K. Belibassakis, Explicit wave-averaged primitive equations using a generalized Lagrangian mean, Ocean Modelling, 20 (1), 35-60, doi:10.1016/j.ocemod.2007.07.001, 2008. Ardhuin, F., et al., Semiempirical Dissipation Source Functions for Ocean Waves. Part I: Definition, Calibration, and Validation, J. Phys. Oceanogr., 40 (9), 1917-1941, doi:10.1175/2010JPO4324.1, 2010. Haas, K. A., and J. C. Warner, Comparing a quasi-3D to a full 3D nearshore circulation model: SHORECIRC and

  13. Performance analysis tool (PATO): Development and preliminary validation

    National Research Council Canada - National Science Library

    Fernando Martins; Filipe Clemente; Frutuoso Silva

    2017-01-01

    .... The Performance Analysis Tool (PATO) software was built with the aim to quickly codify relationships between players and built the adjacency matrices that can be used to test the network measures...

  14. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    McVeigh, J.; Cohen, J.; Vorum, M.; Porro, G.; Nix, G.

    2007-03-01

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program ('the Program'). The analysis is a task by Princeton Energy Resources International, LLC (PERI), in support of the National Renewable Energy Laboratory (NREL) on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE). This requires both computational development (i.e., creating a spreadsheet-based analysis tool) and a synthesis of judgments by a panel of researchers and experts of the expected results of the Program's R&D.

  15. Integrated transcriptome and methylome analysis in youth at high risk for bipolar disorder: a preliminary analysis.

    Science.gov (United States)

    Fries, G R; Quevedo, J; Zeni, C P; Kazimi, I F; Zunta-Soares, G; Spiker, D E; Bowden, C L; Walss-Bass, C; Soares, J C

    2017-03-14

    First-degree relatives of patients with bipolar disorder (BD), particularly their offspring, have a higher risk of developing BD and other mental illnesses than the general population. However, the biological mechanisms underlying this increased risk are still unknown, particularly because most of the studies so far have been conducted in chronically ill adults and not in unaffected youth at high risk. In this preliminary study we analyzed genome-wide expression and methylation levels in peripheral blood mononuclear cells from children and adolescents from three matched groups: BD patients, unaffected offspring of bipolar parents (high risk) and controls (low risk). By integrating gene expression and DNA methylation and comparing the lists of differentially expressed genes and differentially methylated probes between groups, we were able to identify 43 risk genes that discriminate patients and high-risk youth from controls. Pathway analysis showed an enrichment of the glucocorticoid receptor (GR) pathway with the genes MED1, HSPA1L, GTF2A1 and TAF15, which might underlie the previously reported role of stress response in the risk for BD in vulnerable populations. Cell-based assays indicate a GR hyporesponsiveness in cells from adult BD patients compared to controls and suggest that these GR-related genes can be modulated by DNA methylation, which poses the theoretical possibility of manipulating their expression as a means to counteract the familial risk presented by those subjects. Although preliminary, our results suggest the utility of peripheral measures in the identification of biomarkers of risk in high-risk populations and further emphasize the potential role of stress and DNA methylation in the risk for BD in youth.

  16. Preliminary mixed-layer model results for FIRE marine stratocumulus IFO conditions

    Science.gov (United States)

    Barlow, R.; Nicholls, S.

    1990-01-01

    Some preliminary results from the Turton and Nicholls mixed layer model using typical FIRE boundary conditions are presented. The model includes entrainment and drizzle parametrizations as well as interactive long and shortwave radiation schemes. A constraint on the integrated turbulent kinetic energy balance ensures that the model remains energetically consistent at all times. The preliminary runs were used to identify the potentially important terms in the heat and moisture budgets of the cloud layer, and to assess the anticipated diurnal variability. These are compared with typical observations from the C130. Sensitivity studies also revealed the remarkable stability of these cloud sheets: a number of negative feedback mechanisms appear to operate to maintain the cloud over an extended time period. These are also discussed. The degree to which such a modelling approach can be used to explain observed features, the specification of boundary conditions and problems of interpretation in non-horizontally uniform conditions is also raised.

  17. RHF RELAP5 model and preliminary loss-of-offsite-power simulation results for LEU conversion

    Energy Technology Data Exchange (ETDEWEB)

    Licht, J. R. [Argonne National Laboratory (ANL), Argonne, IL (United States). Nuclear Engineering Div.; Bergeron, A. [Argonne National Laboratory (ANL), Argonne, IL (United States). Nuclear Engineering Div.; Dionne, B. [Argonne National Laboratory (ANL), Argonne, IL (United States). Nuclear Engineering Div.; Thomas, F. [Institut Laue-Langevin (ILL), Grenoble (Switzerland). RHF Reactor Dept.

    2014-08-01

    The purpose of this document is to describe the current state of the RELAP5 model for the Institut Laue-Langevin High Flux Reactor (RHF) located in Grenoble, France, and provide an update to the key information required to complete, for example, simulations for a loss of offsite power (LOOP) accident. A previous status report identified a list of 22 items to be resolved in order to complete the RELAP5 model. Most of these items have been resolved by ANL and the RHF team. Enough information was available to perform preliminary safety analyses and define the key items that are still required. Section 2 of this document describes the RELAP5 model of RHF. The final part of this section briefly summarizes previous model issues and resolutions. Section 3 of this document describes preliminary LOOP simulations for both HEU and LEU fuel at beginning of cycle conditions.

  18. RHF RELAP5 Model and Preliminary Loss-Of-Offsite-Power Simulation Results for LEU Conversion

    Energy Technology Data Exchange (ETDEWEB)

    Licht, J. R. [Argonne National Laboratory (ANL), Argonne, IL (United States). Nuclear Engineering Div.; Bergeron, A. [Argonne National Laboratory (ANL), Argonne, IL (United States). Nuclear Engineering Div.; Dionne, B. [Argonne National Laboratory (ANL), Argonne, IL (United States). Nuclear Engineering Div.; Thomas, F. [Institut Laue-Langevin (ILL), Grenoble (Switzerland). RHF Reactor Dept.

    2014-08-01

    The purpose of this document is to describe the current state of the RELAP5 model for the Institut Laue-Langevin High Flux Reactor (RHF) located in Grenoble, France, and provide an update to the key information required to complete, for example, simulations for a loss of offsite power (LOOP) accident. A previous status report identified a list of 22 items to be resolved in order to complete the RELAP5 model. Most of these items have been resolved by ANL and the RHF team. Enough information was available to perform preliminary safety analyses and define the key items that are still required. Section 2 of this document describes the RELAP5 model of RHF. The final part of this section briefly summarizes previous model issues and resolutions. Section 3 of this document describes preliminary LOOP simulations for both HEU and LEU fuel at beginning of cycle conditions.

  19. Hydrothermal Liquefaction and Upgrading of Municipal Wastewater Treatment Plant Sludge: A Preliminary Techno-Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Snowden-Swan, Lesley J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhu, Yunhua [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Susanne B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schmidt, Andrew J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hallen, Richard T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Billing, Justin M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Todd R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fox, Samuel P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Maupin, Gary D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-06-08

    A preliminary process model and techno-economic analysis (TEA) was completed for fuel produced from hydrothermal liquefaction (HTL) of sludge waste from a municipal wastewater treatment plant (WWTP) and subsequent biocrude upgrading. The model is adapted from previous work by Jones et al. (2014) for algae HTL, using experimental data generated in fiscal year 2015 (FY15) bench-scale HTL testing of sludge waste streams. Testing was performed on sludge samples received from MetroVancouver’s Annacis Island WWTP (Vancouver, B.C.) as part of a collaborative project with the Water Environment and Reuse Foundation (WERF). The full set of sludge HTL testing data from this effort will be documented in a separate report to be issued by WERF. This analysis is based on limited testing data and therefore should be considered preliminary. Future refinements are necessary to improve the robustness of the model, including a cross-check of modeled biocrude components with the experimental GCMS data and investigation of equipment costs most appropriate at the smaller scales used here. Environmental sustainability metrics analysis is also needed to understand the broader impact of this technology pathway. The base case scenario for the analysis consists of 10 HTL plants, each processing 100 dry U.S. ton/day (92.4 ton/day on a dry, ash-free basis) of sludge waste and producing 234 barrel per stream day (BPSD) biocrude, feeding into a centralized biocrude upgrading facility that produces 2,020 barrel per standard day of final fuel. This scale was chosen based upon initial wastewater treatment plant data collected by the resource assessment team from the EPA’s Clean Watersheds Needs Survey database (EPA 2015a) and a rough estimate of what the potential sludge availability might be within a 100-mile radius. In addition, we received valuable feedback from the wastewater treatment industry as part of the WERF collaboration that helped form the basis for the selected HTL and upgrading

  20. Preliminary results of a three-dimensional radiative transfer model

    Energy Technology Data Exchange (ETDEWEB)

    O`Hirok, W. [Univ. of California, Santa Barbara, CA (United States)

    1995-09-01

    Clouds act as the primary modulator of the Earth`s radiation at the top of the atmosphere, within the atmospheric column, and at the Earth`s surface. They interact with both shortwave and longwave radiation, but it is primarily in the case of shortwave where most of the uncertainty lies because of the difficulties in treating scattered solar radiation. To understand cloud-radiative interactions, radiative transfer models portray clouds as plane-parallel homogeneous entities to ease the computational physics. Unfortunately, clouds are far from being homogeneous, and large differences between measurement and theory point to a stronger need to understand and model cloud macrophysical properties. In an attempt to better comprehend the role of cloud morphology on the 3-dimensional radiation field, a Monte Carlo model has been developed. This model can simulate broadband shortwave radiation fluxes while incorporating all of the major atmospheric constituents. The model is used to investigate the cloud absorption anomaly where cloud absorption measurements exceed theoretical estimates and to examine the efficacy of ERBE measurements and cloud field experiments. 3 figs.

  1. Bioelectrical impedance analysis for bovine milk: Preliminary results

    Science.gov (United States)

    Bertemes-Filho, P.; Valicheski, R.; Pereira, R. M.; Paterno, A. S.

    2010-04-01

    This work reports the investigation and analysis of bovine milk quality by using biological impedance measurements using electrical impedance spectroscopy (EIS). The samples were distinguished by a first chemical analysis using Fourier transform midinfrared spectroscopy (FTIR) and flow citometry. A set of milk samples (100ml each) obtained from 17 different cows in lactation with and without mastitis were analyzed with the proposed technique using EIS. The samples were adulterated by adding distilled water and hydrogen peroxide in a controlled manner. FTIR spectroscopy and flow cytometry were performed, and impedance measurements were made in a frequency range from 500Hz up to 1MHz with an implemented EIS system. The system's phase shift was compensated by measuring saline solutions. It was possible to show that the results obtained with the Bioelectrical Impedance Analysis (BIA) technique may detect changes in the milk caused by mastitis and the presence of water and hydrogen peroxide in the bovine milk.

  2. IEA-ETSAP TIMES models in Denmark. Preliminary edition

    Energy Technology Data Exchange (ETDEWEB)

    Grohnheit, P.E.

    2011-03-15

    This report presents the project 'Danish participation in IEAETSAP, Annex XI, 2008-2010', which continued the Danish participation in ETSAP under Annex XI 'JOint STudies for New And Mitigated Energy Systems (JOSTNAMES): Climate friendly, Secure and Productive Energy Systems'. The main activity has been semi-annual workshops focusing on presentations of model analyses and use of the ETSAP tools (the MARKAL/TIMES family of models). Contributions to these workshops have been based on various collaborative projects within the EU research programmes and the Danish Centre for Environment, Energy and Health (CEEH). In addition, the DTU Climate Centre at Risoe, which was founded in the autumn of 2008, has taken part in the ETSAP workshops, and used the ETSAP model tools for projects, papers, and presentations, as well as for a Ph.D. project. (Author)

  3. Some vaccination strategies for the SEIR epidemic model. Preliminary results

    CERN Document Server

    De la Sen, M; Alonso-Quesada, S

    2011-01-01

    This paper presents a vaccination-based control strategy for a SEIR (susceptible plus infected plus infectious plus removed populations) propagation disease model. The model takes into account the total population amounts as a refrain for the illness transmission since its increase makes more difficult contacts among susceptible and infected. The control objective is the asymptotically tracking of the removed-by-immunity population to the total population while achieving simultaneously the remaining population (i.e. susceptible plus infected plus infectious) to asymptotically tend to zero.

  4. A Preliminary Analysis of a Behavioral Classrooms Needs Assessment

    Science.gov (United States)

    Leaf, Justin B.; Leaf, Ronald; McCray, Cynthia; Lamkins, Carol; Taubman, Mitchell; McEachin, John; Cihon, Joseph H.

    2016-01-01

    Today many special education classrooms implement procedures based upon the principles of Applied Behavior Analysis (ABA) to establish educationally relevant skills and decrease aberrant behaviors. However, it is difficult for school staff and consultants to evaluate the implementation of various components of ABA and general classroom set up. In…

  5. A Preliminary MANPRINT Evaluation of the All Source Analysis (ASAS)

    Science.gov (United States)

    1988-11-01

    Rear (CEWI) FSIC ............................ 2 CEWI ( TCAE ) AIM(6) ........................... 2 DTOC AIM(6...Sensors and the Ml Battalion TCAE ..... ............... . 13 2. Ratings of Understanding of Tasks Required at the Completion of Training and at the...for transmission to the sensors and jammers. CEWI Tactical Control and Analysis Element ( TCAE ) AIM(6) The AIM module consists of a VAX 750R computer

  6. Preliminary development of the Active Colonoscopy Training Model

    Directory of Open Access Journals (Sweden)

    Choi J

    2011-06-01

    Full Text Available JungHun Choi1, Kale Ravindra1, Randolph Robert1, David Drozek21Mechanical Engineering, Ohio University, Athens, OH, USA; 2College of Osteopathic Medicine, Ohio University, Athens, OH, USAAbstract: Formal colonoscopy training requires a significant amount of time and effort. In particular, it requires actual patients for a realistic learning experience. The quality of colonoscopy training varies, and includes didactic courses and procedures proctored by skilled surgeons. A colonoscopy training model is occasionally used as part of the training method, but the effects are minute due to both the simple and tedious training procedures. To enhance the educational effect of the colonoscopy training model, the Active Colonoscopy Training Model (ACTM has been developed. ACTM is an interactive colonoscopy training device which can create the environment of a real colonoscopy procedure as closely as possible. It comprises a configurable rubber colon, a human torso, sensors, a display, and the control part. The ACTM provides audio and visual interaction to the trainee by monitoring important factors, such as forces caused by the distal tip and the shaft of the colonoscope and the pressure to open up the lumen and the localization of the distal tip. On the computer screen, the trainee can easily monitor the status of the colonoscopy, which includes the localization of the distal tip, maximum forces, pressure inside the colon, and surgery time. The forces between the rubber colon and the constraints inside the ACTM are measured and the real time display shows the results to the trainee. The pressure sensors will check the pressure at different parts of the colon. The real-time localized distal tip gives the colonoscopy trainee easier and more confident operation without introducing an additional device in the colonoscope. With the current need for colonoscopists and physicians, the ACTM can play an essential role resolving the problems of the current

  7. Modelación de valores extremos: Un análisis preliminar de la precipitación mensual en La Habana; Extreme-value modelling: A preliminary analysis of monthly precipitation at Havana

    Directory of Open Access Journals (Sweden)

    Jesper Ryden

    2011-02-01

    Full Text Available El análisis estadístico de valores extremos es de suma importancia en muchos campos de la ingeniería.Este trabajo es una breve introducción a la modelación con distribución  de valores extremos. Consisteen la presentación de dos métodos básicos comúnmente empleados en el modelado de valores extremospara analizar el problema típico de estimación de valores de retorno. Como ilustración de los métodos,se investiga un conjunto de datos de la precipitación mensual en La Habana. Statistical analysis of extreme values is of importance in many fields of engineering. This paper willserve as a brief introduction to modelling with extreme-value distributions. A presentation of two common,basic methods is given to analyse the standard problem in extreme-value modelling of estimation of returnvalues. As an illustration of the methods, a data set of monthly precipitation at Havana is investigated.

  8. Preliminary shielding analysis for the CSNS target station monolith

    Institute of Scientific and Technical Information of China (English)

    张斌; 陈义学; 杨寿海; 吴军; 殷雯; 梁天骄; 贾学军

    2010-01-01

    The construction of the China Spallation Neutron Source (CSNS) has been initiated at Dongguan,Guangdong,China.In spallation neutron sources the target station monolith is contaminated by a large number of fast neutrons whose energies can be as large as those of the protons of the proton beam directed towards the tungsten target.A detailed radiation transport analysis of the target station monolith is important for the construction of the CSNS.The analysis is performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method.Successful elimination of the primary ray effects via the two-dimensional uncollided flux and first collision source methodology is also illustrated.The dose at the edge of the monolith is calculated.The results demonstrate that the doses received by the hall staff members are below the required standard limit.

  9. Preliminary analysis of productivity of fruiting fungi on Strzeleckie meadows

    Directory of Open Access Journals (Sweden)

    Barbara Sadowska

    2014-11-01

    Full Text Available Analysis demonstrated that the fresh ahd dry weight as well as the ash content of fungal fruit bodies collected on a forest-surrounded unmown meadow (Stellario-Deschampsietum Freitag 1957 and Caricetum elatae W.Koch 1926 were lower than the same values for a plot of exploited mown meadow and higher than on an exploited unmown meadow (Arrhenatheretum medioeuropaeum (Br.-Bl. Oberd. 1952.

  10. Preliminary modelling study of ice accretion on wind turbines

    DEFF Research Database (Denmark)

    Pedersen, Marie Cecilie; Yin, Chungen

    2014-01-01

    One of the main challenges associated with cold-climate wind energy is icing on wind turbines and a series of icing-induced problems such as production loss, blade fatigue and safety issues. Because of the difficulties with on-site measurements, simulations are often used to understand and predict...... icing events. In this paper, a new methodology for prediction of icing-induced production loss is proposed, from which the fundamentals of ice accretion on wind turbines can be better understood and the operational production losses can be more reliably predicted. Computational fluid dynamics (CFD......) modelling of ice accretion on wind turbines is also performed for different ice events, resulting in a reliable framework for CFD-based ice accretion modelling which is one of the key elements in the new methodology....

  11. Vaccination strategies for SEIR models using feedback linearization. Preliminary results

    CERN Document Server

    De la Sen, M; Alonso-Quesada, S

    2011-01-01

    A linearization-based feedback-control strategy for a SEIR epidemic model is discussed. The vaccination objective is the asymptotically tracking of the removed-by-immunity population to the total population while achieving simultaneously the remaining population (i.e. susceptible plus infected plus infectious) to asymptotically tend to zero. The disease controlpolicy is designed based on a feedback linearization technique which provides a general method to generate families of vaccination policies with sound technical background.

  12. A Preliminary Evaluation of Bandwidth Allocation Model Dynamic Switching

    Directory of Open Access Journals (Sweden)

    Rafael F. Reale

    2014-06-01

    Full Text Available Bandwidth Allocation Models (BAMs are used in order to define Bandwidth Constraints (BCs in a per-class basis for MPLS/DS-TE networks and effectively define how network resources like bandwidth are obtained and shared by applications. The BAMs proposed (MAM – Maximum Allocation Model, RDM – Russian Dolls Model, G-RDM – Generic RDM and AllocTC-Sharing attempt to optimize the use of bandwidth resources on a per-link basis with different allocation and resource sharing characteristics. As such, the adoption of distinct BAMs and/or changes in network resource demands (network traffic profile may result in different network traffic allocation and operational behavior for distinct BAMs. This paper evaluates the resulting network characteristics (li nk utilization, preemption and flows blocking of using BAMs dynamically with different traffic scenarios. In brief, it is investigated the dynamics of BAM switching with distinct traffic scenarios. The paper presents initially the investigated BAMs in relation to their behavior and resource allocation characteristics. Then, distinct BAMs are compared using different traffic scenarios in order to investigate the impact of a dynamic change of the BAM configured in the network. Finally, the paper shows that the adoption of a dynamic BAM allocation strategy may result in benefits for network operation in terms of link utilization, preemption and flows blocking.

  13. A preliminary study of periodontitis and vascular calcification compound model

    Institute of Scientific and Technical Information of China (English)

    MENGYun; DENGJing; PanKe-qing

    2015-01-01

    Objective This experiment is desired to establish a compound model of chronic periodontitis and vascular calcification,so as to study the relation of periodontal and vascular calcification.Methods Forty male Wistar rats were randomly divided into:control group(group C),periodontitis group(group CP),vascular calcification group(group VDN),compound group (group CP+VDN).Every groups accepted the corresponding manages to establish the animal model.Eight weeks later,al the rats were sacrificed and the fol owing items were observed:inflam-matory factor in serum were tested,Hematoxylin-eosin staining(HE)staining of vascular tissue were taken to test.Results Through detection of periodontal tissue,serum and vascular tissue,an-imal models were successful.Histopathologic observation revealed:obvious inflammation of periodontal tissue was obversed in group CP and CP+VDN.The red Mineralized nodules deposition in group VDN and CP+VDN were higher than in group C and CP(P<0.05)by HE staining,and that in group CP+VDN was significantly higher than in group VDN(P<0.05);Animals in group CP+VDN showed higher level of IL-1 in serum than that in group CP,VDN and C.Conclusion This study has demonstrated that periodontitis have some promoting ef ect on vascular cal-cification.

  14. Modelled and Observed Diurnal SST Signals: "SSTDV:R.EX.-IM.A.M." Project Preliminary Results

    DEFF Research Database (Denmark)

    Karagali, Ioanna; Høyer, Jacob; LeBorgne, Pierre

    2013-01-01

    This study presents some of the preliminary results from the ESA Support To Science Element (STSE) funded project on the Diurnal Variability of the Sea Surface Temperature, regarding its Regional Extend and Implications in Atmospheric Modelling (SSTDV:R.EX.–IM.A.M.). During this phase...... of the project, the focus is on the regional extend of diurnal variability. Particularly, extensive sensitivity tests regarding the definition of SSTfound fields show that using only quality 5 SEVIRI data results in warmer foundation fields SSTfound while there is an added ∼0.2 K variability when using multi...... Ocean Turbulence Model (GOTM) is applied. Preliminary results show that the initial temperature profiles may give a warmer start-up in the model while the light extinction scheme is a controlling factor for the amplitude and vertical extend of the daily signal....

  15. Preliminary investigation of flow dynamics during the start-up of a bulb turbine model

    Science.gov (United States)

    Coulaud, M.; Fraser, R.; Lemay, J.; Duquesne, P.; Aeschlimann, V.; Deschênes, C.

    2016-11-01

    Nowadays, the electricity network undergoes more perturbations due to the market demand. Additionally, an increase of the production from alternative resources such as wind or solar also induces important variations on the grid. Hydraulic power plants are used to respond quickly to these variations to stabilize the network. Hydraulic turbines have to face more frequent start-up and stop sequences that might shorten significantly their life time. In this context, an experimental analysis of start-up sequences has been conducted on the bulb turbine model of the BulbT project at the Hydraulic Machines Laboratory (LAMH) of Laval University. Maintaining a constant head, guide vanes are opened from 0 ° to 30 °. Three guide vanes opening speed have been chosen from 5 °/s to 20 °/s. Several repetitions were done for each guide vanes opening speed. During these sequences, synchronous time resolved measurements have been performed. Pressure signals were recorded at the runner inlet and outlet and along the draft tube. Also, 25 pressure measurements and strain measurements were obtained on the runner blades. Time resolved particle image velocimetry were used to evaluate flowrate during start-up for some repetitions. Torque fluctuations at shaft were also monitored. This paper presents the experimental set-up and start-up conditions chosen to simulate a prototype start-up. Transient flowrate methodology is explained and validation measurements are detailed. The preliminary results of global performances and runner pressure measurements are presented.

  16. Volume analysis of heat-induced cracks in human molars: A preliminary study

    Directory of Open Access Journals (Sweden)

    Michael A. Sandholzer

    2014-01-01

    Full Text Available Context: Only a few methods have been published dealing with the visualization of heat-induced cracks inside bones and teeth. Aims : As a novel approach this study used nondestructive X-ray microtomography (micro-CT for volume analysis of heat-induced cracks to observe the reaction of human molars to various levels of thermal stress. Materials and Methods: Eighteen clinically extracted third molars were rehydrated and burned under controlled temperatures (400, 650, and 800°C using an electric furnace adjusted with a 25°C increase/min. The subsequent high-resolution scans (voxel-size 17.7 μm were made with a compact micro-CT scanner (SkyScan 1174. In total, 14 scans were automatically segmented with Definiens XD Developer 1.2 and three-dimensional (3D models were computed with Visage Imaging Amira 5.2.2. The results of the automated segmentation were analyzed with an analysis of variance (ANOVA and uncorrected post hoc least significant difference (LSD tests using Statistical Package for Social Sciences (SPSS 17. A probability level of P < 0.05 was used as an index of statistical significance. Results: A temperature-dependent increase of heat-induced cracks was observed between the three temperature groups (P < 0.05, ANOVA post hoc LSD. In addition, the distributions and shape of the heat-induced changes could be classified using the computed 3D models. Conclusion: The macroscopic heat-induced changes observed in this preliminary study correspond with previous observations of unrestored human teeth, yet the current observations also take into account the entire microscopic 3D expansions of heat-induced cracks within the dental hard tissues. Using the same experimental conditions proposed in the literature, this study confirms previous results, adds new observations, and offers new perspectives in the investigation of forensic evidence.

  17. An evaluation of the Positive Emotional Experiences Scale: A preliminary analysis

    Directory of Open Access Journals (Sweden)

    Rene van Wyk

    2016-04-01

    Full Text Available Orientation: The positive organisational behaviour movement emphasises the advantages of psychological strengths in business. The psychological virtues of positive emotional experiences can potentially promote human strengths to the advantages of business functioning and the management of work conditions. This is supported by Fredrickson’s broaden-and-build theory that emphasises the broadening of reactive thought patterns through experiences of positive emotions.Research purpose: A preliminary psychometric evaluation of a positive measurement of dimensions of emotional experiences in the workplace, by rephrasing the Kiefer and Barclay Toxic Emotional Experiences Scale.Motivation for the study: This quantitative Exploratory Factor Analysis investigates the factorial structure and reliability of the Positive Emotional Experiences Scale, a positive rephrased version of the Toxic Emotional Experiences Scale.Research approach, design and method: This Exploratory Factor Analysis indicates an acceptable three-factor model for the Positive Emotional Experiences Scale. These three factors are: (1 psychological recurrent positive state, (2 social connectedness and (3 physical refreshed energy, with strong Cronbach’s alphas of 0.91, 0.91 and 0.94, respectively.Main findings: The three-factor model of the Positive Emotional Experiences Scale provides a valid measure in support of Fredrickson’s theory of social, physical and psychological endured personal resources that build positive emotions.Practical/Managerial implications: Knowledge gained on positive versus negative emotional experiences could be applied by management to promote endured personal resources that strengthen positive emotional experiences.Contribution/value-add: The contribution of this rephrased Positive Emotional Experiences Scale provides a reliable measure of assessment of the social, physical and endured psychological and personal resources identified in Fredrickson’s broaden

  18. Cloning, expression, crystallization and preliminary X-ray data analysis of norcoclaurine synthase from Thalictrum flavum

    Energy Technology Data Exchange (ETDEWEB)

    Pasquo, Alessandra [ENEA Casaccia Research Centre, Dipartimento BIOTEC, Sezione Genetica e Genomica Vegetale, PO Box 2400, I-00100 Rome (Italy); Bonamore, Alessandra; Franceschini, Stefano; Macone, Alberto; Boffi, Alberto; Ilari, Andrea, E-mail: andrea.ilari@uniroma1.it [Istituto di Biologia e Patologia Molecolari, CNR (IBPM) and Department Of Biochemical Sciences, University of Roma ‘La Sapienza’, Piazza Aldo Moro 5, 00179 Roma (Italy); ENEA Casaccia Research Centre, Dipartimento BIOTEC, Sezione Genetica e Genomica Vegetale, PO Box 2400, I-00100 Rome (Italy)

    2008-04-01

    The cloning, expression, crystallization and preliminary X-ray data analysis of norcoclaurine synthase from T. flavum, a protein which catalyzes the first committed step in the biosynthesis of benzylisoquinoline alkaloids, are reported. Norcoclaurine synthase (NCS) catalyzes the condensation of 3,4-dihydroxyphenylethylamine (dopamine) and 4-hydroxyphenylacetaldehyde (4-HPAA) as the first committed step in the biosynthesis of benzylisoquinoline alkaloids in plants. The protein was cloned, expressed and purified. Crystals were obtained at 294 K by the hanging-drop vapour-diffusion method using ammonium sulfate and sodium chloride as precipitant agents and diffract to better than 3.0 Å resolution using a synchrotron-radiation source. The crystals belong to the trigonal space group P3{sub 1}21, with unit-cell parameters a = b = 86.31, c = 118.36 Å. A selenomethionine derivative was overexpressed, purified and crystallized in the same space group. A complete MAD data set was collected at 2.7 Å resolution. The model is under construction.

  19. N-Acetyltransferase 2 status and gastric cancer risk: a preliminary meta-analysis

    Directory of Open Access Journals (Sweden)

    Stefania Boccia

    2005-03-01

    Full Text Available

    In recent studies N- Acetyltransferase 2 (NAT2 genotype has been considered as a risk factor for developing gastric cancer, however with conflicting results among Asian and Caucasian populations. In order to clarify the influence of NAT2 slow acetylation status on gastric cancer risk, a preliminary meta-analysis of published case-control studies was undertaken.

    The primary outcome measure was the odds ratio (OR for the risk of gastric cancer associated with the NAT2 slow genotype using a random effects model. Pooling the results from the 5 studies identified (771 cases, 1083 controls, an overall OR for gastric cancer risk associated with the NAT2 slow genotype of 0.91 emerged (95% CI: 0.54-1.55.

    The result suggests that the NAT2 slow genotype has probably no effect on the risk of gastric cancer. Additional epidemiological studies, based on sample sizes that are commensurate with the detection of small genotypic risks, are required to confirm these findings. Future studies may also help to clarify whether geographic differences exist.

  20. Preliminary Analysis of Two Years of the Massive Collision Monitoring Activity

    Science.gov (United States)

    McKnight, Darren; Matney, Mark; Walbert, Kris; Behrend, Sophie; Casey, Patrick; Speaks, Seth

    2017-01-01

    It is hypothesized that the interactions between many of the most massive derelicts in low Earth orbit are more frequent than modeled by the traditional combination of kinetic theory of gases and Poisson probability distribution function. This is suggested by the fact that there are clusters of derelicts where members' inclinations are nearly identical and their apogees/perigees overlap significantly resulting in periodic synchronization of the objects' orbits. In order to address this proposition, an experiment was designed and conducted over the last two years. Results from this monitoring and characterization experiment are presented with implications for proposed debris remediation strategies. Four separate clusters of massive derelicts were examined that are centered around 775km, 850km, 975km, and 1500km, respectively. In aggregate, the constituents of these clusters contain around 500 objects and about 800,000kg of mass; this equates to a third of all derelict mass in LEO. Preliminary analysis indicates that encounter rates over this time period for these objects are greater than is estimated by traditional techniques. Hypothesized dependencies between latitude of encounter, relative velocity, frequency of encounters, inclination, and differential semi-major axis were established and verified. This experiment also identified specific repeatable cluster dynamics that may reduce the cost/risk and enhance the effectiveness of debris remediation activities and also enable new operational debris remediation options.

  1. Analysis of the preliminary optical links between ARTEMIS and the Optical Ground Station

    Science.gov (United States)

    Reyes Garcia-Talavera, Marcos; Chueca, Sergio; Alonso, Angel; Viera, Teodora; Sodnik, Zoran

    2002-12-01

    In the frame of the SILEX project, the European Space Agency (ESA) has put into orbit two Laser Communication Terminals, to establish an experimental free space optical communication link between a GEO satellite (ARTEMIS) and a LEO satellite (SPOT IV), to relay earth observation data. In order to perform In Orbit Testing (IOT) of these, and other, optical communications systems, ESA and the Instituto de Astrofisica de Canarias (IAC) reached an agreement for building the Optical Ground Station (OGS), in the Teide Observatory of the IAC. With ARTEMIS placed in a circular parking orbit at about 31000 kilometres, its optical payload has been preliminary tested with the OGS. First results and analysis are presented on the space-to-ground bi-directional link, including pointing acquisition and tracking performance, Bit-Error Rate (BER) and transmitted beam divergence effects related with atmospheric models and predictions. Future plans include deeper optical bi-directional communication tests of OGS, not only with ARTEMIS but also with OSCAR-40 (downlink) and SMART-1 (up-link) satellites, in order to do a full characterisation of the performances of laser beam propagation through atmospheric turbulence and a comparison with theoretical predictions.

  2. Preliminary analysis of the mitochondrial genome evolutionary pattern in primates

    Institute of Scientific and Technical Information of China (English)

    Liang ZHAO; Xingtao ZHANG; Xingkui TAO; Weiwei WANG; Ming LI

    2012-01-01

    Since the birth of molecular evolutionary analysis,primates have been a central focus of study and mitochondrial DNA is well suited to these endeavors because of its unique features.Surprisingly,to date no comprehensive evaluation of the nucleotide substitution patterns has been conducted on the mitochondrial genome of primates.Here,we analyzed the evolutionary patterns and evaluated selection and recombination in the mitochondrial genomes of 44 Primates species downloaded from GenBank.The results revealed that a strong rate heterogeneity occurred among sites and genes in all comparisons.Likewise,an obvious decline in primate nucleotide diversity was noted in the subunit rRNAs and tRNAs as compared to the protein-coding genes.Within 13 protein-coding genes,the pattern of nonsynonymous divergence was similar to that of overall nucleotide divergence,while synonymous changes differed only for individual genes,indicating that the rate heterogeneity may result from the rate of change at nonsynonymous sites.Codon usage analysis revealed that there was intermediate codon usage bias in primate protein-coding genes,and supported the idea that GC mutation pressure might determine codon usage and that positive selection is not the driving force for the codon usage bias.Neutrality tests using site-specific positive selection from a Bayesian framework indicated no sites were under positive selection for any gene,consistent with near neutrality.Recombination tests based on the pairwise homoplasy test statistic supported complete linkage even for much older divergent primate species.Thus,with the exception of rate heterogeneity among mitochondrial genes,evaluating the validity assumed complete linkage and selective neutrality in primates prior to phylogenetic or phylogeographic analysis seems unnecessary.

  3. Preliminary analysis of the mitochondrial genome evolutionary pattern in primates.

    Science.gov (United States)

    Zhao, Liang; Zhang, Xingtao; Tao, Xingkui; Wang, Weiwei; Li, Ming

    2012-08-01

    Since the birth of molecular evolutionary analysis, primates have been a central focus of study and mitochondrial DNA is well suited to these endeavors because of its unique features. Surprisingly, to date no comprehensive evaluation of the nucleotide substitution patterns has been conducted on the mitochondrial genome of primates. Here, we analyzed the evolutionary patterns and evaluated selection and recombination in the mitochondrial genomes of 44 Primates species downloaded from GenBank. The results revealed that a strong rate heterogeneity occurred among sites and genes in all comparisons. Likewise, an obvious decline in primate nucleotide diversity was noted in the subunit rRNAs and tRNAs as compared to the protein-coding genes. Within 13 protein-coding genes, the pattern of nonsynonymous divergence was similar to that of overall nucleotide divergence, while synonymous changes differed only for individual genes, indicating that the rate heterogeneity may result from the rate of change at nonsynonymous sites. Codon usage analysis revealed that there was intermediate codon usage bias in primate protein-coding genes, and supported the idea that GC mutation pressure might determine codon usage and that positive selection is not the driving force for the codon usage bias. Neutrality tests using site-specific positive selection from a Bayesian framework indicated no sites were under positive selection for any gene, consistent with near neutrality. Recombination tests based on the pairwise homoplasy test statistic supported complete linkage even for much older divergent primate species. Thus, with the exception of rate heterogeneity among mitochondrial genes, evaluating the validity assumed complete linkage and selective neutrality in primates prior to phylogenetic or phylogeographic analysis seems unnecessary.

  4. Preliminary safety analysis for key design features of KALIMER-600

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. B.; Chang, W. P.; Suk, S. D.; Ha, K. S.; Jeong, H. Y.; Heo, S

    2004-03-01

    KAERI is developing the conceptual design of a Liquid Metal Reactor, KALIMER-600 (Korea Advanced LIquid MEtal Reactor) under the Long-term Nuclear R and D Program. KALIMER-600 addresses key issues regarding future nuclear power plants such as plant safety, economics, proliferation, and waste. In this report, key safety design features are described and safety analyses results for typical ATWS accidents in the KALIMER design with breakeven core are presented. First, the basic approach to achieve the safety goal is introduced in Chapter 1, and the event categorization and acceptance criteria for the KALIMER-600 safety analysis are described in Chapter 2. In Chapter 3, results of inherent safety evaluations for the KALIMER-600 conceptual design are presented. The KALIMER-600 core and plant system are designed to assure benign performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated Anticipated Transient Without Scram (ATWS) have been performed using the SSC-K code to investigate the KALIMER-600 system response to the events. They are categorized as Bounding Events (BEs) because of their low probability of occurrence. In Chapter 4, the analysis of flow blockage for KALIMER-600 with the MATRA-LMR-FB code, which has been developed for the internal flow blockage in a LMR subassembly. The cases with a blockage of 6-subchannel, 24-subchannel, and 54-subchannel are analyzed.The performance analysis of the KALIMER-600 containment and some evaluations for the behaviors during HCDA will be performed later.

  5. Preliminary safety analysis for key design features of KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, D. H.; Kwon, Y. M.; Chang, W. P.; Suk, S. D.; Lee, S. O.; Lee, Y. B.; Jeong, K. S

    2000-07-01

    KAERI is currently developing the conceptual design of a liquid metal reactor, KALIMER(Korea Advanced Liquid Metal Reactor) under the long-term nuclear R and D program. In this report, descriptions of the KALIMER safety design features and safety analyses results for selected ATWS accidents are presented. First, the basic approach to achieve the safety goal is introduced in chapter 1, and the safety evaluation procedure for the KALIMER design is described in chapter 2. It includes event selection, event categorization, description of design basis events, and beyond design basis events. In chapter 3, results of inherent safety evaluations for the KALIMER conceptual design are presented. The KALIMER core and plant system are designed to assure design performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated anticipated transient without scram(ATWS) have been performed to investigate the KALIMER system response to the events. They are categorized as bounding events(BEs) because of their low probability of occurrence. In chapter 4, the design of the KALIMER containment dome and the results of its performance analysis are presented. The designs of the existing LMR containment and the KALIMER containment dome have been compared in this chapter. Procedure of the containment performance analysis and the analysis results are described along with the accident scenario and source terms. Finally, a simple methodology is introduced to investigate the core kinetics and hydraulic behavior during HCDA in chapter 5. Mathematical formulations have been developed in the framework of the modified bethe-tait method, and scoping analyses have been performed for the KALIMER core behavior during super-prompt critical excursions.

  6. Preliminary RAMI analysis of DFLL TBS for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dagui [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230031 (China); Yuan, Run [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Wang, Jiaqun, E-mail: jiaqun.wang@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Wang, Fang; Wang, Jin [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

    2016-11-15

    Highlights: • We performed the functional analysis of the DFLL TBS. • We performed a failure mode analysis of the DFLL TBS. • We estimated the reliability and availability of the DFLL TBS. • The ITER RAMI approach was applied to the DFLL TBS for technical risk control in the design phase. - Abstract: ITER is the first fusion machine fully designed to prove the physics and technological basis for next fusion power plants. Among the main technical objectives of ITER is to test and validate design concepts of tritium breeding blankets relevant to the fusion power plants. To achieve this goal, China has proposed the dual functional lithium-lead test blanket module (DFLL TBM) concept design. The DFLL TBM and its associated ancillary system were called DFLL TBS. The DFLL TBS play a key role in next fusion reactor. In order to ensure reliable and available of DFLL TBS, the risk control project of DFLL TBS has been put on the schedule. As the stage of the ITER technical risk control policy, the RAMI (Reliability, Availability, Maintainability, Inspectability) approach was used to control the technical risk of ITER. In this paper, the RAMI approach was performed on the conceptual design of DFLL TBS. A functional breakdown was prepared on DFLL TBS, and the system was divided into 3 main functions and 72 basic functions. Based on the result of functional breakdown of DFLL TBS, the reliability block diagrams were prepared to estimate the reliability and availability of each function under the stipulated operating conditions. The inherent availability of the DFLL TBS expected after implementation of mitigation actions was calculated to be 98.57% over 2 years based on the ITER reliability database. A Failure Modes Effects and Criticality Analysis (FMECA) was performed with criticality charts highlighting the risk level of the different failure modes with regard to their probability of occurrence and their effects on the availability.

  7. Preliminary Modeling of Accident Tolerant Fuel Concepts under Accident Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Gamble, Kyle A.; Hales, Jason D.

    2016-12-01

    The catastrophic events that occurred at the Fukushima-Daiichi nuclear power plant in 2011 have led to widespread interest in research of alternative fuels and claddings that are proposed to be accident tolerant. Thus, the United States Department of Energy through its NEAMS (Nuclear Energy Advanced Modeling and Simulation) program has funded an Accident Tolerant Fuel (ATF) High Impact Problem (HIP). The ATF HIP is funded for a three-year period. The purpose of the HIP is to perform research into two potential accident tolerant concepts and provide an in-depth report to the Advanced Fuels Campaign (AFC) describing the behavior of the concepts, both of which are being considered for inclusion in a lead test assembly scheduled for placement into a commercial reactor in 2022. The initial focus of the HIP is on uranium silicide fuel and iron-chromium-aluminum (FeCrAl) alloy cladding. Utilizing the expertise of three national laboratory participants (INL, LANL, and ANL) a comprehensive mulitscale approach to modeling is being used including atomistic modeling, molecular dynamics, rate theory, phase-field, and fuel performance simulations. In this paper, we present simulations of two proposed accident tolerant fuel systems: U3Si2 fuel with Zircaloy-4 cladding, and UO2 fuel with FeCrAl cladding. The simulations investigate the fuel performance response of the proposed ATF systems under Loss of Coolant and Station Blackout conditions using the BISON code. Sensitivity analyses are completed using Sandia National Laboratories’ DAKOTA software to determine which input parameters (e.g., fuel specific heat) have the greatest influence on the output metrics of interest (e.g., fuel centerline temperature). Early results indicate that each concept has significant advantages as well as areas of concern. Further work is required prior to formulating the proposition report for the Advanced Fuels Campaign.

  8. Preliminary Axial Flow Turbine Design and Off-Design Performance Analysis Methods for Rotary Wing Aircraft Engines. Part 1; Validation

    Science.gov (United States)

    Chen, Shu-cheng, S.

    2009-01-01

    For the preliminary design and the off-design performance analysis of axial flow turbines, a pair of intermediate level-of-fidelity computer codes, TD2-2 (design; reference 1) and AXOD (off-design; reference 2), are being evaluated for use in turbine design and performance prediction of the modern high performance aircraft engines. TD2-2 employs a streamline curvature method for design, while AXOD approaches the flow analysis with an equal radius-height domain decomposition strategy. Both methods resolve only the flows in the annulus region while modeling the impact introduced by the blade rows. The mathematical formulations and derivations involved in both methods are documented in references 3, 4 for TD2-2) and in reference 5 (for AXOD). The focus of this paper is to discuss the fundamental issues of applicability and compatibility of the two codes as a pair of companion pieces, to perform preliminary design and off-design analysis for modern aircraft engine turbines. Two validation cases for the design and the off-design prediction using TD2-2 and AXOD conducted on two existing high efficiency turbines, developed and tested in the NASA/GE Energy Efficient Engine (GE-E3) Program, the High Pressure Turbine (HPT; two stages, air cooled) and the Low Pressure Turbine (LPT; five stages, un-cooled), are provided in support of the analysis and discussion presented in this paper.

  9. Macroalgae as a Biomass Feedstock: A Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Roesijadi, Guritno; Jones, Susanne B.; Snowden-Swan, Lesley J.; Zhu, Yunhua

    2010-09-26

    A thorough of macroalgae analysis as a biofuels feedstock is warranted due to the size of this biomass resource and the need to consider all potential sources of feedstock to meet current biomass production goals. Understanding how to harness this untapped biomass resource will require additional research and development. A detailed assessment of environmental resources, cultivation and harvesting technology, conversion to fuels, connectivity with existing energy supply chains, and the associated economic and life cycle analyses will facilitate evaluation of this potentially important biomass resource.

  10. Statistical Analysis of Time Series Data (STATS). Users Manual (Preliminary)

    Science.gov (United States)

    1987-05-01

    15, 30. 60, 90, 120, andL -!/14:X.... 183 days are presently used. auto Page 1 of 10 wrpy *VtsE0> J1 record (continued) Field Variab Vlue D 2 NPRDS ...each event. 6 JEND + Order number of last period in time series to ( NPRDS ) select for analysis. If blank, the last period is assumed. 7 JPPF Plotting...values. 2 NPRDS + Actual number of periods for the event following on ’INO records until the next ID, BF, or LI record. IN record - T:E SERIES DATA

  11. Preliminary modeling of BNCT beam tube on IRT in Sofia.

    Science.gov (United States)

    Belousov, S; Ilieva, K

    2009-07-01

    The technical design of the research reactor IRT in Sofia is in progress. It includes an arrangement for a BNCT facility for tumor treatment. Modeling of geometry and material composition of filter/collimator for the BNCT beam tube on IRT has been carried out following the beam tube configuration of the Massachusetts Institute of Technology Reactor [Harling et al., 2002. The fission converter-based epithermal neutron irradiation facility at the Massachusetts Institute of Technology Reactor. Nucl. Sci. Eng. 140, 223-240.] and taking into account an ability to include the tube into the IRT reactor geometry. The results of neutron and gamma transport calculations performed for the model have shown that the facility will be able to supply an epithermal neutron flux of about 5 x 10(9) n cm(-2)s(-1), with low contamination from fast neutrons and gamma rays that would be among the best facilities currently available. An optimiziation study has been performed for the beam collimator, following similar studies for the TAPIRO research reactor in Italy. [Nava et al., 2005. Monte Carlo optimization of a BNCT facility for treating brain gliomas at the TAPIRO reactor. Radiat. Prot. Dosim. 116 (1-4), 475-481.].

  12. TPX: Contractor preliminary design review. Volume 3, Design and analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-30

    Several models have been formed for investigating the maximum electromagnetic loading and magnetic field levels associated with the Tokamak Physics eXperiment (TPX) superconducting Poloidal Field (PF) coils. The analyses have been performed to support the design of the individual fourteen hoop coils forming the PF system. The coils have been sub-divided into three coil systems consisting of the central solenoid (CS), PF5 coils, and the larger radius PF6 and PF7 coils. Various electromagnetic analyses have been performed to determine the electromagnetic loadings that the coils will experience during normal operating conditions, plasma disruptions, and fault conditions. The loadings are presented as net body forces acting individual coils, spatial variations throughout the coil cross section, and force variations along the path of the conductor due to interactions with the TF coils. Three refined electromagnetic models of the PF coil system that include a turn-by-turn description of the fields and forces during a worst case event are presented in this report. A global model including both the TF and PF system was formed to obtain the force variations along the path of the PF conductors resulting from interactions with the TF currents. In addition to spatial variations, the loadings are further subdivided into time-varying and steady components so that structural fatigue issues can be addressed by designers and analysts. Other electromagnetic design issues such as the impact of the detailed coil designs on field errors are addressed in this report. Coil features that are analyzed include radial transitions via short jogs vs. spiral type windings and the effects of layer-to-layer rotations (i.e clocking) on the field errors.

  13. Synthesis, preliminary bioevaluation and computational analysis of caffeic acid analogues.

    Science.gov (United States)

    Liu, Zhiqian; Fu, Jianjun; Shan, Lei; Sun, Qingyan; Zhang, Weidong

    2014-05-16

    A series of caffeic acid amides were designed, synthesized and evaluated for anti-inflammatory activity. Most of them exhibited promising anti-inflammatory activity against nitric oxide (NO) generation in murine macrophage RAW264.7 cells. A 3D pharmacophore model was created based on the biological results for further structural optimization. Moreover, predication of the potential targets was also carried out by the PharmMapper server. These amide analogues represent a promising class of anti-inflammatory scaffold for further exploration and target identification.

  14. Preliminary Analysis of the Transient Reactor Test Facility (TREAT) with PROTEUS

    Energy Technology Data Exchange (ETDEWEB)

    Connaway, H. M. [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, C. H. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-11-30

    The neutron transport code PROTEUS has been used to perform preliminary simulations of the Transient Reactor Test Facility (TREAT). TREAT is an experimental reactor designed for the testing of nuclear fuels and other materials under transient conditions. It operated from 1959 to 1994, when it was placed on non-operational standby. The restart of TREAT to support the U.S. Department of Energy’s resumption of transient testing is currently underway. Both single assembly and assembly-homogenized full core models have been evaluated. Simulations were performed using a historic set of WIMS-ANL-generated cross-sections as well as a new set of Serpent-generated cross-sections. To support this work, further analyses were also performed using additional codes in order to investigate particular aspects of TREAT modeling. DIF3D and the Monte-Carlo codes MCNP and Serpent were utilized in these studies. MCNP and Serpent were used to evaluate the effect of geometry homogenization on the simulation results and to support code-to-code comparisons. New meshes for the PROTEUS simulations were created using the CUBIT toolkit, with additional meshes generated via conversion of selected DIF3D models to support code-to-code verifications. All current analyses have focused on code-to-code verifications, with additional verification and validation studies planned. The analysis of TREAT with PROTEUS-SN is an ongoing project. This report documents the studies that have been performed thus far, and highlights key challenges to address in future work.

  15. Modeling of enterprise information systems implementation: a preliminary investigation

    Science.gov (United States)

    Yusuf, Yahaya Y.; Abthorpe, M. S.; Gunasekaran, Angappa; Al-Dabass, D.; Onuh, Spencer

    2001-10-01

    The business enterprise has never been in greater need of Agility and the current trend will continue unabated well into the future. It is now recognized that information system is both the foundation and a necessary condition for increased responsiveness. A successful implementation of Enterprise Resource Planning (ERP) can help a company to move towards delivering on its competitive objectives as it enables suppliers to reach out to customers beyond the borders of traditional market defined by geography. The cost of implementation, even when it is successful, could be significant. Bearing in mind the potential strategic benefits, it is important that the implementation project is managed effectively. To this end a project cost model against which to benchmark ongoing project expenditure versus activities completed has been proposed in this paper.

  16. Dynamic density functional theory of solid tumor growth: Preliminary models

    Directory of Open Access Journals (Sweden)

    Arnaud Chauviere

    2012-03-01

    Full Text Available Cancer is a disease that can be seen as a complex system whose dynamics and growth result from nonlinear processes coupled across wide ranges of spatio-temporal scales. The current mathematical modeling literature addresses issues at various scales but the development of theoretical methodologies capable of bridging gaps across scales needs further study. We present a new theoretical framework based on Dynamic Density Functional Theory (DDFT extended, for the first time, to the dynamics of living tissues by accounting for cell density correlations, different cell types, phenotypes and cell birth/death processes, in order to provide a biophysically consistent description of processes across the scales. We present an application of this approach to tumor growth.

  17. Brain hemisphere dominance and vocational preference: a preliminary analysis.

    Science.gov (United States)

    Szirony, Gary Michael; Pearson, L Carolyn; Burgin, John S; Murray, Gerald C; Elrod, Lisa Marie

    2007-01-01

    Recent developments in split-brain theory add support to the concept of specialization within brain hemispheres. Holland's vocational personality theory may overlap with Human Information Processing (HIP) characteristics. Holland's six RIASEC codes were developed to identify vocational personality characteristics, and HIP scales were designed to measure hemispheric laterality. Relationships between the two scales were evaluated through canonical correlation with some significant results, however not all Holland scale scores correlated with left, right, or integrated hemispheric preference. Additional findings related to participants self-perception of music and math ability were also correlated. Findings on this added analysis revealed a high correlation between perception of musical ability and right brain function but not between mathematical concept and left brain alone. Implications regarding vocational choice and work are discussed.

  18. City of Hoboken Energy Surety Analysis: Preliminary Design Summary

    Energy Technology Data Exchange (ETDEWEB)

    Stamp, Jason Edwin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Baca, Michael J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Munoz-Ramos, Karina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Schenkman, Benjamin L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Eddy, John P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Smith, Mark A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Guttromson, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electric Power Systems Research Dept.; Henry, Jordan M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Critical Infrastructure Systems Dept.; Jensen, Richard Pearson [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Geomechanics Dept.

    2014-09-01

    In 2012, Hurricane Sandy devastated much of the U.S. northeast coastal areas. Among those hardest hit was the small community of Hoboken, New Jersey, located on the banks of the Hudson River across from Manhattan. This report describes a city-wide electrical infrastructure design that uses microgrids and other infrastructure to ensure the city retains functionality should such an event occur in the future. The designs ensure that up to 55 critical buildings will retain power during blackout or flooded conditions and include analysis for microgrid architectures, performance parameters, system control, renewable energy integration, and financial opportunities (while grid connected). The results presented here are not binding and are subject to change based on input from the Hoboken stakeholders, the integrator selected to manage and implement the microgrid, or other subject matter experts during the detailed (final) phase of the design effort.

  19. Analysis of organochlorine pesticides in human milk: preliminary results.

    Science.gov (United States)

    Campoy, C; Jiménez, M; Olea-Serrano, M F; Moreno-Frías, M; Cañabate, F; Olea, N; Bayés, R; Molina-Font, J A

    2001-11-01

    In the face of evidence of human milk contamination by organochlorine pesticides, an analysis was performed on samples of milk obtained from healthy lactating women in the provinces of Granada and Almeria in Southern Spain. The samples were obtained by the Neonate Section of the Department of Pediatrics of Granada University Hospital (Neonatology Division) and by the Neonatal Service of Poniente Hospital in El Ejido, Almería. A liquid-liquid extraction procedure was performed. The cleaning of the sample before gas chromatography-mass spectrometry (GC-MS) used silica Sep-Pak. Among other pesticides, aldrin, dieldrin, DDT and its metabolites, lindane, methoxychlor and endosulfan were identified. The presence of these products was confirmed by mass spectrometry. The identification and quantification of these organochlorine molecules is important because they have estrogenic effects.

  20. Preliminary analysis of cerebrospinal fluid proteome in patients with neurocysticercosis

    Institute of Scientific and Technical Information of China (English)

    TIAN Xiao-jun; LI Jing-yi; HUANG Yong; XUE Yan-ping

    2009-01-01

    Background Neurocysticercosis is the infection of the nervous system by the larvae of Taenia solium (T. solium). Despite continuous effort, the experimental diagnosis of neurocysticercosis remains unresolved. Since the cerebrospinal fluid (CSF) contacts with the brain, dynamic information about pathological processes of the brain is likely to be reflected in CSF. Therefore, CSF may serve as a rich source of putative biomarkers related to neurocysticercosis. Comparative proteomic analysis of CSF of neurocysticercosis patients and control subjects may find differentially expressed proteins. Methods Two-dimensional difference in gel electrophoresis (2D-DIGE) was used to investigate differentially expressed proteins in CSF of patients with neurocysticercosis by comparing the protein profile of CSF from neurocysticercosis patients with that from control subjects. The differentially expressed spots/proteins were recognized with matrix-assisted laser desorption/ionization-time of flight-time of flight (MALDI-TOF-TOF) mass spectrometry. Results Forty-four enzyme digested peptides were obtained from 4 neurocysticercotic patients. Twenty-three were identified through search of the NCBI protein database with Mascot software, showing 19 up-expressed and 4 down-expressed. Of these proteins, 26S proteosome related to ATP- and ubiquitin-dependent degradation of proteins and lipocalin type prostaglandin D synthase involved in PGD2-synthesis and extracellular transporter activities were up-expressed, while transferrin related to iron metabolism within the brain was down-expressed. Conclusions This study established the proteomic profile of pooled CSF from 4 patients with neurocysticercosis, suggesting the potential value of proteomic analysis for the study of candidate biomarkers involved in the diagnosis or pathogenesis of neurocysticercosis.

  1. Preliminary analysis of red mud spill based on aerial imagery

    Directory of Open Access Journals (Sweden)

    Péter Burai

    2011-06-01

    Full Text Available One of the largest industrial spills in Europe occurred in the village of Kolontár (Hungary on October 4, 2010. The primary objective of the hyperspectral remote sensing mission was to monitor that is necessary in order to estimate the environmental damage, the precise size of the polluted area, the rating of substance concentration in the mud, and the overall condition of the flooded district as soon as possible. The secondary objective was to provide geodetic data necessary for the high-resolution visual information from the data of an additional Lidar survey, and for the coherent modeling of the event. For quick assessment and remediation purposes, it was deemed important to estimate the thickness of the red mud, particularly the areas where it was deposited in a thick layer. The results showed that some of the existing tools can be easily modified and implemented to get the most out of the available advanced remote sensing data.

  2. Fugacity based modeling for pollutant fate and transport during floods. Preliminary results

    Science.gov (United States)

    Deda, M.; Fiorini, M.; Massabo, M.; Rudari, R.

    2010-09-01

    - February 2010. This inundation was produced by two rivers: DRINI and BUNA. The flooded area was about 11.400 hectare including the urban and agriculture areas, almost 7.000 persons was evacuates, and 3.600 homes were under the water and the maximum depth of water was about 1 - 4 m. This flood was the largest occurred in recent centuries in Albania, and caused incalculable damage to the population and environment. The preliminary results of the model application to the case study is presented; the model allows to estimate the extend of the contaminated areas and the location of the most probable contaminates zones after the flood; furhermore the model can simulate the time for natural restoration. All this infomartion, that are relevant for the post emergency phase, are higly affected by uncertainty; thus a sensitivity analysis of the model has been carried out. The analysys focused on the sensitivity to emission rates, contaminat source location, dynamic of the water flood and mass transport parameters.

  3. Preliminary analysis of the use of smartwatches for longitudinal health monitoring.

    Science.gov (United States)

    Jovanov, Emil

    2015-08-01

    New generations of smartwatches feature continuous measurement of physiological parameters, such as heart rate, galvanic skin resistance (GSR), and temperature. In this paper we present the results of preliminary analysis of the use of Basis Peak smartwatch for longitudinal health monitoring during a 4 month period. Physiological measurements during sleep are validated using Zephyr Bioharness 3 monitor and SOMNOscreen+ polysomnographic monitoring system from SOMNOmedics. Average duration of sequences with no missed data was 49.9 minutes, with maximum length of 17 hours, and they represent 88.88% of recording time. Average duration of the charging event was 221.9 min, and average time between charges was 54 hours, with maximum duration of the charging event of 16.3 hours. Preliminary results indicate that the physiological monitoring performance of existing smartwatches provides sufficient performance for longitudinal monitoring of health status and analysis of health and wellness trends.

  4. Relative risk analysis in regulating the use of radiation-emitting medical devices. A preliminary application

    Energy Technology Data Exchange (ETDEWEB)

    Jones, E.D.; Banks, W.W.; Altenbach, T.J.; Fischer, L.E. [Lawrence Livermore National Lab., CA (United States)

    1995-09-01

    This report describes a preliminary application of an analysis approach for assessing relative risks in the use of radiation- emitting medical devices. Results are presented on human-initiated actions and failure modes that are most likely to occur in the use of the Gamma Knife, a gamma irradiation therapy device. This effort represents an initial step in a US Nuclear Regulatory Commission (NRC) plan to evaluate the potential role of risk analysis in regulating the use of nuclear medical devices. For this preliminary application of risk assessment, the focus was to develop a basic process using existing techniques for identifying the most likely risk contributors and their relative importance. The approach taken developed relative risk rankings and profiles that incorporated the type and quality of data available and could present results in an easily understood form. This work was performed by the Lawrence Livermore National Laboratory for the NRC.

  5. Sammon mapping for preliminary analysis in Hyperspectral Imagery

    Directory of Open Access Journals (Sweden)

    Nicolae APOSTOLESCU

    2016-03-01

    Full Text Available The main goal of this paper is to present the implementation of the Sammon algorithm developed for finding N points in a lower m-dimensional subspace, where the original points are from a high n-dimensional space. This mapping is done so interpoints Euclidian distances in m-space correspond to the distances measured in the n-dimensional space. This method known as non-linear projection method or multidimensional scaling (MDS aims to preserve the global properties of points. The method is based on the idea of transforming the original, n-dimensional input space into a reduced, m-dimensional one, where mAnalysis (PCA may be applied as a pre-processing procedure for starting, in order to obtain the N points in the lower subspace. The algorithm was tested on hyperspectral data with spectra of various lengths. Depending of the size of the input data (number of points, the number of learning iterations and computational facilities available, Sammon mapping might be computationally expensive.

  6. Preliminary Analysis of Slope Stability in Kuok and Surrounding Areas

    Directory of Open Access Journals (Sweden)

    Dewandra Bagus Eka Putra

    2016-12-01

    Full Text Available The level of slope influenced by the condition of the rocks beneath the surface. On high level of slopes, amount of surface runoff and water transport energy is also enlarged. This caused by greater gravity, in line with the surface tilt from the horizontal plane. In other words, topsoil eroded more and more. When the slope becomes twice as steep, then the amount of erosion per unit area be 2.0 - 2.5 times more. Kuok and surrounding area is the road access between the West Sumatra and Riau which plays an important role economies of both provinces. The purpose of this study is to map the locations that have fairly steep slopes and potential mode of landslides. Based on SRTM data obtained,  the roads in Kuok area has a minimum elevation of + 33 m and a maximum  + 217.329 m. Rugged road conditions with slope ranging from 24.08 ° to 44.68 ° causing this area having frequent landslides. The result of slope stability analysis in a slope near the Water Power Plant Koto Panjang, indicated that mode of active failure is toppling failure or rock fall and the potential zone of failure is in the center part of the slope.

  7. Social network analysis in identifying influential webloggers: A preliminary study

    Science.gov (United States)

    Hasmuni, Noraini; Sulaiman, Nor Intan Saniah; Zaibidi, Nerda Zura

    2014-12-01

    In recent years, second generation of internet-based services such as weblog has become an effective communication tool to publish information on the Web. Weblogs have unique characteristics that deserve users' attention. Some of webloggers have seen weblogs as appropriate medium to initiate and expand business. These webloggers or also known as direct profit-oriented webloggers (DPOWs) communicate and share knowledge with each other through social interaction. However, survivability is the main issue among DPOW. Frequent communication with influential webloggers is one of the way to keep survive as DPOW. This paper aims to understand the network structure and identify influential webloggers within the network. Proper understanding of the network structure can assist us in knowing how the information is exchanged among members and enhance survivability among DPOW. 30 DPOW were involved in this study. Degree centrality and betweenness centrality measurement in Social Network Analysis (SNA) were used to examine the strength relation and identify influential webloggers within the network. Thus, webloggers with the highest value of these measurements are considered as the most influential webloggers in the network.

  8. SLUDGE TREATMENT PROJECT ENGINEERED CONTAINER RETRIEVAL AND TRANSFER SYSTEM PRELIMINARY DESIGN HAZARD ANALYSIS SUPPLEMENT 1

    Energy Technology Data Exchange (ETDEWEB)

    FRANZ GR; MEICHLE RH

    2011-07-18

    This 'What/If' Hazards Analysis addresses hazards affecting the Sludge Treatment Project Engineered Container Retrieval and Transfer System (ECRTS) NPH and external events at the preliminary design stage. In addition, the hazards of the operation sequence steps for the mechanical handling operations in preparation of Sludge Transport and Storage Container (STSC), disconnect STSC and prepare STSC and Sludge Transport System (STS) for shipping are addressed.

  9. Preliminary Failure Modes and Effects Analysis of the US Massive Gas Injection Disruption Mitigation System Design

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2013-10-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a candidate design for the ITER Disruption Mitigation System. This candidate is the Massive Gas Injection System that provides machine protection in a plasma disruption event. The FMEA was quantified with “generic” component failure rate data as well as some data calculated from operating facilities, and the failure events were ranked for their criticality to system operation.

  10. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2007-08-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  11. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2010-06-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  12. Preliminary accident analysis of Flexblue® underwater reactor

    Directory of Open Access Journals (Sweden)

    Haratyk Geoffrey

    2015-01-01

    Full Text Available Flexblue® is a subsea-based, transportable, small modular reactor delivering 160 MWe. Immersion provides the reactor with an infinite heat sink – the ocean – around the metallic hull. The reference design includes a loop-type PWR with two horizontal steam generators. The safety systems are designed to operate passively; safety functions are fulfilled without operator action and external electrical input. Residual heat is removed through four natural circulation loops: two primary heat exchangers immersed in safety tanks cooled by seawater and two emergency condensers immersed in seawater. In case of a primary piping break, a two-train safety injection system is actuated. Each train includes a core makeup tank, an accumulator and a safety tank at low pressure. To assess the capability of these features to remove residual heat, the reactor and its safety systems have been modelled using thermal-hydraulics code ATHLET with conservative assumptions. The results of simulated transients for three typical PWR accidents are presented: a turbine trip with station blackout, a large break loss of coolant accident and a small break loss of coolant accident. The analyses show that the safety criteria are respected and that the reactor quickly reaches a safe shutdown state without operator action and external power.

  13. Preliminary analysis of phosphorus flow in Hue Citadel.

    Science.gov (United States)

    Anh, T N Q; Harada, H; Fujii, S; Anh, P N; Lieu, P K; Tanaka, S

    2016-01-01

    Characteristics of waste and wastewater management can affect material flows. Our research investigates the management of waste and wastewater in urban areas of developing countries and its effects on phosphorus flow based on a case study in Hue Citadel, Hue, Vietnam. One hundred households were interviewed to gain insight into domestic waste and wastewater management together with secondary data collection. Next, a phosphorus flow model was developed to quantify the phosphorus input and output in the area. The results showed that almost all wastewater generated in Hue Citadel was eventually discharged into water bodies and to the ground/groundwater. This led to most of the phosphorus output flowing into water bodies (41.2 kg P/(ha year)) and ground/groundwater (25.3 kg P/(ha year)). Sewage from the sewer system was the largest source of phosphorus loading into water bodies, while effluent from on-site sanitation systems was responsible for a major portion of phosphorus into the ground/groundwater. This elevated phosphorus loading is a serious issue in considering surface water and groundwater protection.

  14. Preliminary survivability analysis of manned spacecraft following orbital debris penetration

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yong; HAN ZengYao; LIMing; ZHENG ShiGui

    2009-01-01

    Meteoroid and orbital debris (M/OD) may cause severe damages or even catastrophic failures for long-term manned spacecrafts in orbit due to the hypervelocity impact (HVI) destruction. It is essential to quantitatively assess the M/OD risk of manned spacecraft, in this paper, the catastrophic failure as-sessment function is successfully integrated into the Meteoroid & Orbital Debris Assessment and Op-timization System Tools (MODAOST), which is the M/OD risk assessment system developed by China Academy of Space Technology. The survivability assessment for the US Lab by MODAOST was con-sistent with that of the Manned Spacecraft Crew Survivability computer code (MSCSurv). Meanwhile,the simulation process showed that this function was more effective than MSCSurv for the application of the standard methodology of M/OD risk assessment instead of the Monte Carlo model. This function expands the ability of MODAOST in predicting the survivability of the typical catastrophic failure modes such as crew hypoxia and the critical cracking.

  15. Preliminary survivability analysis of manned spacecraft following orbital debris penetration

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Meteoroid and orbital debris(M/OD) may cause severe damages or even catastrophic failures for long-term manned spacecrafts in orbit due to the hypervelocity impact(HVI) destruction.It is essential to quantitatively assess the M/OD risk of manned spacecraft.In this paper,the catastrophic failure as-sessment function is successfully integrated into the Meteoroid & Orbital Debris Assessment and Op-timization System Tools(MODAOST),which is the M/OD risk assessment system developed by China Academy of Space Technology.The survivability assessment for the US Lab by MODAOST was con-sistent with that of the Manned Spacecraft Crew Survivability computer code(MSCSurv).Meanwhile,the simulation process showed that this function was more effective than MSCSurv for the application of the standard methodology of M/OD risk assessment instead of the Monte Carlo model.This function expands the ability of MODAOST in predicting the survivability of the typical catastrophic failure modes such as crew hypoxia and the critical cracking.

  16. Developing ontological model of computational linear algebra - preliminary considerations

    Science.gov (United States)

    Wasielewska, K.; Ganzha, M.; Paprzycki, M.; Lirkov, I.

    2013-10-01

    The aim of this paper is to propose a method for application of ontologically represented domain knowledge to support Grid users. The work is presented in the context provided by the Agents in Grid system, which aims at development of an agent-semantic infrastructure for efficient resource management in the Grid. Decision support within the system should provide functionality beyond the existing Grid middleware, specifically, help the user to choose optimal algorithm and/or resource to solve a problem from a given domain. The system assists the user in at least two situations. First, for users without in-depth knowledge about the domain, it should help them to select the method and the resource that (together) would best fit the problem to be solved (and match the available resources). Second, if the user explicitly indicates the method and the resource configuration, it should "verify" if her choice is consistent with the expert recommendations (encapsulated in the knowledge base). Furthermore, one of the goals is to simplify the use of the selected resource to execute the job; i.e., provide a user-friendly method of submitting jobs, without required technical knowledge about the Grid middleware. To achieve the mentioned goals, an adaptable method of expert knowledge representation for the decision support system has to be implemented. The selected approach is to utilize ontologies and semantic data processing, supported by multicriterial decision making. As a starting point, an area of computational linear algebra was selected to be modeled, however, the paper presents a general approach that shall be easily extendable to other domains.

  17. Communication Analysis modelling techniques

    CERN Document Server

    España, Sergio; Pastor, Óscar; Ruiz, Marcela

    2012-01-01

    This report describes and illustrates several modelling techniques proposed by Communication Analysis; namely Communicative Event Diagram, Message Structures and Event Specification Templates. The Communicative Event Diagram is a business process modelling technique that adopts a communicational perspective by focusing on communicative interactions when describing the organizational work practice, instead of focusing on physical activities1; at this abstraction level, we refer to business activities as communicative events. Message Structures is a technique based on structured text that allows specifying the messages associated to communicative events. Event Specification Templates are a means to organise the requirements concerning a communicative event. This report can be useful to analysts and business process modellers in general, since, according to our industrial experience, it is possible to apply many Communication Analysis concepts, guidelines and criteria to other business process modelling notation...

  18. Preliminary Analysis on Matric Suction for Barren Soil

    Science.gov (United States)

    Azhar, A. T. S.; Fazlina, M. I. S.; Aziman, M.; Fairus, Y. M.; Azman, K.; Hazreek, Z. A. M.

    2016-11-01

    Most research conducted on slope failures can broadly be attributed to the convergence of three factors, i.e. rainfall, steepness of slope, and soil geological profile. The mechanism of the failures is mainly due to the loss of matric suction of soils by rainwater. When rainwater infiltrates into the slopes, it will start to saturate the soil, i.e., reduce the matric suction. A good understanding of landslide mechanisms and the characteristics of unsaturated soil and rock in tropical areas is crucial in landslide hazard formulation. Most of the slope failures in unsaturated tropical residual soil in Malaysia are mainly due to infiltration, especially during intense and prolonged rainfall, which reduces the soil matric suction and hence decreases the stability of the slope. Therefore, the aim of this research is to determine the matric suction for barren soil and to model an unsaturated slope with natural rainfall to evaluate the effects of matric suction on rainfall intensity. A field test was carried out using the Watermark Soil Moisture Sensor to determine the matric suction. The sensor was connected to a program called SpecWare 9 Basic which also used Data Logging Rain gauge Watermark 1120 to measure the intensity and duration of rainfall. This study was conducted at the Research Centre for Soft Soil which is a new Research and Development (R & D) initiative by Universiti Tun Hussein Onn Malaysia, Parit Raja. Field observation showed that the highest daily suction was recorded during noon while the lowest suction was obtained at night and early morning. The highest matric suction for loose condition was 31.0 kPa while the highest matric suction for compacted condition was 32.4 kPa. The results implied that the field suction variation was not only governed by the rainfall, but also the cyclic evaporation process. The findings clearly indicated that the changes in soil suction distribution patterns occurred due to different weather conditions.

  19. PRELIMINARY PHYTOCHEMICAL ANALYSIS AND ACUTE ORAL TOXICITY STUDY OF CLITORIA TERNATEA LINN. ROOTS IN ALBINO MICE

    Directory of Open Access Journals (Sweden)

    Deka Manalisha

    2011-12-01

    Full Text Available Clitoria ternatea has been using since the ancient times for its medicinal values. Almost all the parts of the plant have medicinal property. The root of the plant is reported to have anti diarrheal, Anti histamic, cholinergic activity etc. Traditionally the root has been using for the treatment of many diseases like leucorrhoea, diarrhea, urinary problems, diuretic, impotency, stomach trouble etc. The present study was designed to investigate the preliminary phytochemical analysis and acute oral toxicity of the root of the plant. The shed dried materials were grinded and used in the study. The preliminary phytochemical analysis was done by following standard protocols. For acute oral toxicity study, methanolic extract of the root was used. The extract was prepared by standard protocol. The preliminary phytochemical analysis showed the presence of proteins, carbohydrates, glycosides, resins, saponin, flavonoid, alkaloids, steroids and phenol. The acute oral toxicity study showed no mortality up to a dose of 3000 mg per kg body weight. The presence of plant chemicals revealed the medicinal values and the non toxic property of the plant indicated the value of the plant as medicine. Thus we can conclude that, the root of the plant can be used as a safe drug against many diseases.

  20. PRELIMINARY PHYTOCHEMICAL ANALYSIS AND ACUTE ORAL TOXICITY STUDY OF MUCUNA PRURIENS LINN. IN ALBINO MICE

    Directory of Open Access Journals (Sweden)

    Deka Manalisha

    2012-02-01

    Full Text Available Mucuna Pruriens Linn. is an annual, climbing shrub which has an important place among aphrodisiac herbs in India since the ancient times. The plant has been using traditionally for many medicinal purposes such as Infertility, Parkinson’s disease, Loss of libido, Antioxidant, Anti venom, Anti microbial etc. The present study was carried out to investigate the preliminary phytochemical analysis and acute oral toxicity of the seeds of M.pruriens on albino mice. Matured seeds of M.pruriens were dried in shed and grinded in a mechanical grinder. The preliminary phytochemical analysis was done by following standard protocols. For acute oral toxicity study, methanolic extract of the seeds were used. The extract was prepared in a Soxlet apparatus. The preliminary phytochemical analysis showed the presence of protein, carbohydrates, glycosides, alkaloids, steroids, flavonoids, phenols and tannins. The acute oral toxicity study showed no mortality up to a dose of 4000 mg per kg body weight. The presence of plant chemicals revealed the medicinal values and the non toxic property of the plant indicated the value of the plant as medicine. Thus, we can conclude that, the seed of the plant can be used as a safe drug against many diseases.

  1. Assessing Internet addiction using the parsimonious Internet addiction components model - a preliminary study [forthcoming

    OpenAIRE

    Kuss, DJ; Shorter, GW; Van Rooij, AJ; Griffiths, MD; Schoenmakers, T.

    2014-01-01

    Internet usage has grown exponentially over the last decade. Research indicates that excessive Internet use can lead to symptoms associated with addiction. To date, assessment of potential Internet addiction has varied regarding populations studied and instruments used, making reliable prevalence estimations difficult. To overcome the present problems a preliminary study was conducted testing a parsimonious Internet addiction components model based on Griffiths’ addiction components (2005), i...

  2. A new scoring system in Cystic Fibrosis: statistical tools for database analysis - a preliminary report.

    Science.gov (United States)

    Hafen, G M; Hurst, C; Yearwood, J; Smith, J; Dzalilov, Z; Robinson, P J

    2008-10-05

    Cystic fibrosis is the most common fatal genetic disorder in the Caucasian population. Scoring systems for assessment of Cystic fibrosis disease severity have been used for almost 50 years, without being adapted to the milder phenotype of the disease in the 21st century. The aim of this current project is to develop a new scoring system using a database and employing various statistical tools. This study protocol reports the development of the statistical tools in order to create such a scoring system. The evaluation is based on the Cystic Fibrosis database from the cohort at the Royal Children's Hospital in Melbourne. Initially, unsupervised clustering of the all data records was performed using a range of clustering algorithms. In particular incremental clustering algorithms were used. The clusters obtained were characterised using rules from decision trees and the results examined by clinicians. In order to obtain a clearer definition of classes expert opinion of each individual's clinical severity was sought. After data preparation including expert-opinion of an individual's clinical severity on a 3 point-scale (mild, moderate and severe disease), two multivariate techniques were used throughout the analysis to establish a method that would have a better success in feature selection and model derivation: 'Canonical Analysis of Principal Coordinates' and 'Linear Discriminant Analysis'. A 3-step procedure was performed with (1) selection of features, (2) extracting 5 severity classes out of a 3 severity class as defined per expert-opinion and (3) establishment of calibration datasets. (1) Feature selection: CAP has a more effective "modelling" focus than DA.(2) Extraction of 5 severity classes: after variables were identified as important in discriminating contiguous CF severity groups on the 3-point scale as mild/moderate and moderate/severe, Discriminant Function (DF) was used to determine the new groups mild, intermediate moderate, moderate, intermediate

  3. A new scoring system in Cystic Fibrosis: statistical tools for database analysis – a preliminary report

    Science.gov (United States)

    Hafen, GM; Hurst, C; Yearwood, J; Smith, J; Dzalilov, Z; Robinson, PJ

    2008-01-01

    Background Cystic fibrosis is the most common fatal genetic disorder in the Caucasian population. Scoring systems for assessment of Cystic fibrosis disease severity have been used for almost 50 years, without being adapted to the milder phenotype of the disease in the 21st century. The aim of this current project is to develop a new scoring system using a database and employing various statistical tools. This study protocol reports the development of the statistical tools in order to create such a scoring system. Methods The evaluation is based on the Cystic Fibrosis database from the cohort at the Royal Children's Hospital in Melbourne. Initially, unsupervised clustering of the all data records was performed using a range of clustering algorithms. In particular incremental clustering algorithms were used. The clusters obtained were characterised using rules from decision trees and the results examined by clinicians. In order to obtain a clearer definition of classes expert opinion of each individual's clinical severity was sought. After data preparation including expert-opinion of an individual's clinical severity on a 3 point-scale (mild, moderate and severe disease), two multivariate techniques were used throughout the analysis to establish a method that would have a better success in feature selection and model derivation: 'Canonical Analysis of Principal Coordinates' and 'Linear Discriminant Analysis'. A 3-step procedure was performed with (1) selection of features, (2) extracting 5 severity classes out of a 3 severity class as defined per expert-opinion and (3) establishment of calibration datasets. Results (1) Feature selection: CAP has a more effective "modelling" focus than DA. (2) Extraction of 5 severity classes: after variables were identified as important in discriminating contiguous CF severity groups on the 3-point scale as mild/moderate and moderate/severe, Discriminant Function (DF) was used to determine the new groups mild, intermediate moderate

  4. A new scoring system in Cystic Fibrosis: statistical tools for database analysis – a preliminary report

    Directory of Open Access Journals (Sweden)

    Yearwood J

    2008-10-01

    Full Text Available Abstract Background Cystic fibrosis is the most common fatal genetic disorder in the Caucasian population. Scoring systems for assessment of Cystic fibrosis disease severity have been used for almost 50 years, without being adapted to the milder phenotype of the disease in the 21st century. The aim of this current project is to develop a new scoring system using a database and employing various statistical tools. This study protocol reports the development of the statistical tools in order to create such a scoring system. Methods The evaluation is based on the Cystic Fibrosis database from the cohort at the Royal Children's Hospital in Melbourne. Initially, unsupervised clustering of the all data records was performed using a range of clustering algorithms. In particular incremental clustering algorithms were used. The clusters obtained were characterised using rules from decision trees and the results examined by clinicians. In order to obtain a clearer definition of classes expert opinion of each individual's clinical severity was sought. After data preparation including expert-opinion of an individual's clinical severity on a 3 point-scale (mild, moderate and severe disease, two multivariate techniques were used throughout the analysis to establish a method that would have a better success in feature selection and model derivation: 'Canonical Analysis of Principal Coordinates' and 'Linear Discriminant Analysis'. A 3-step procedure was performed with (1 selection of features, (2 extracting 5 severity classes out of a 3 severity class as defined per expert-opinion and (3 establishment of calibration datasets. Results (1 Feature selection: CAP has a more effective "modelling" focus than DA. (2 Extraction of 5 severity classes: after variables were identified as important in discriminating contiguous CF severity groups on the 3-point scale as mild/moderate and moderate/severe, Discriminant Function (DF was used to determine the new groups mild

  5. Preliminary design of a small air loop for system analysis and validation of Cathare code

    Energy Technology Data Exchange (ETDEWEB)

    Marchand, M.; Saez, M.; Tauveron, N.; Tenchine, D.; Germain, T.; Geffraye, G.; Ruby, G.P. [CEA Grenoble (DEN/DER/SSTH), 38 (France)

    2007-07-01

    The French Atomic Energy Commission (Cea) is carrying on the design of a Small Air Loop for System Analysis (SALSA), devoted to the study of gas cooled nuclear reactors behaviour in normal and incidental/accidental operating conditions. The reduced size of the SALSA components compared to a full-scale reactor and air as gaseous coolant instead of Helium will allow an easy management of the loop. The main purpose of SALSA will be the validation of the associated thermal hydraulic safety simulation codes, like CATHARE. The main goal of this paper is to present the methodology used to define the characteristics of the loop. In a first step, the study has been focused on a direct-cycle system for the SALSA loop with few global constraints using a similarity analysis to support the definition and design of the loop. Similarity requirements have been evaluated to determine the scale factors which have to be applied to the SALSA loop components. The preliminary conceptual design of the SALSA plant with a definition of each component has then be carried out. The whole plant has been modelled using the CATHARE code. Calculations of the SALSA steady-state in nominal conditions and of different plant transients in direct-cycle have been made. The first system results obtained on the global behaviour of the loop confirm that SALSA can be representative of a Gas-Cooled nuclear reactor with some minor design modifications. In a second step, the current prospects focus on the SALSA loop capability to reproduce correctly the heat transfer occurring in specific incidental situations. Heat decay removal by natural convection is a crucial point of interest. The first results show that the behaviour and the efficiency of the loop are strongly influenced by the definition of the main parameters for each component. A complete definition of SALSA is under progress. (authors)

  6. Preliminary CFD Analysis for HVAC System Design of a Containment Building

    Energy Technology Data Exchange (ETDEWEB)

    Son, Sung Man; Choi, Choengryul [ELSOLTEC, Yongin (Korea, Republic of); Choo, Jae Ho; Hong, Moonpyo; Kim, Hyungseok [KEPCO Engineering and Construction, Gimcheon (Korea, Republic of)

    2016-10-15

    HVAC (Heating, Ventilation, Air Conditioning) system has been mainly designed based on overall heat balance and averaging concepts, which is simple and useful for designing overall system. However, such a method has the disadvantage that cannot predict the local flow and temperature distributions in a containment building. In this study, a CFD (Computational Fluid Dynamics) preliminary analysis is carried out to obtain detailed flow and temperature distributions in a containment building and to ensure that such information can be obtained via CFD analysis. This approach can be useful for hydrogen analysis in an accident related to hydrogen released into a containment building. In this study, CFD preliminary analysis has been performed to obtain the detailed information of the reactor containment building by using the CFD analysis techniques and to ensure that such information can be obtained via CFD analysis. We confirmed that CFD analysis can offer enough detailed information about flow patterns and temperature field and that CFD technique is a useful tool for HVAC design of nuclear power plants.

  7. Application of Thermal Network Model to Transient Thermal Analysis of Power Electronic Package Substrate

    National Research Council Canada - National Science Library

    Ishizuka, Masaru; Hatakeyama, Tomoyuki; Funawatashi, Yuichi; Koizumi, katsuhiro

    2011-01-01

    .... This paper describes an application of the thermal network method to the transient thermal analysis of multichip modules and proposes a simple model for the thermal analysis of multichip modules as a preliminary thermal design tool. On the basis of the result of transient thermal analysis, the validity of the thermal network method and the simple thermal analysis model is confirmed.

  8. Biologically Inspired Visual Model With Preliminary Cognition and Active Attention Adjustment.

    Science.gov (United States)

    Qiao, Hong; Xi, Xuanyang; Li, Yinlin; Wu, Wei; Li, Fengfu

    2015-11-01

    Recently, many computational models have been proposed to simulate visual cognition process. For example, the hierarchical Max-Pooling (HMAX) model was proposed according to the hierarchical and bottom-up structure of V1 to V4 in the ventral pathway of primate visual cortex, which could achieve position- and scale-tolerant recognition. In our previous work, we have introduced memory and association into the HMAX model to simulate visual cognition process. In this paper, we improve our theoretical framework by mimicking a more elaborate structure and function of the primate visual cortex. We will mainly focus on the new formation of memory and association in visual processing under different circumstances as well as preliminary cognition and active adjustment in the inferior temporal cortex, which are absent in the HMAX model. The main contributions of this paper are: 1) in the memory and association part, we apply deep convolutional neural networks to extract various episodic features of the objects since people use different features for object recognition. Moreover, to achieve a fast and robust recognition in the retrieval and association process, different types of features are stored in separated clusters and the feature binding of the same object is stimulated in a loop discharge manner and 2) in the preliminary cognition and active adjustment part, we introduce preliminary cognition to classify different types of objects since distinct neural circuits in a human brain are used for identification of various types of objects. Furthermore, active cognition adjustment of occlusion and orientation is implemented to the model to mimic the top-down effect in human cognition process. Finally, our model is evaluated on two face databases CAS-PEAL-R1 and AR. The results demonstrate that our model exhibits its efficiency on visual recognition process with much lower memory storage requirement and a better performance compared with the traditional purely computational

  9. GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of Jasminum cuspidatum leaves

    National Research Council Canada - National Science Library

    Singumsetty Vinay; Shaik Karimulla; Devarajan Saravanan

    2014-01-01

    The purpose of the present study was investigating the GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of the leaves of Jasminum cuspidatum...

  10. Preliminary phytochemical analysis and DPPH free radical scavenging activity of Trewia nudiflora Linn. roots and leaves.

    Science.gov (United States)

    Balakrishnan, N; Srivastava, Mayank; Tiwari, Pallavi

    2013-11-01

    Oxidative stress is one of the major causative factors of many chronic and degenerative diseases. Plants have been used in traditional medicine in different parts of world for thousands of years and continue to provide new remedies for human kind. The present study was to investigate the preliminary phytochemical analysis of various extracts of roots and leaves of Trewia nudiflora (Euphorbiaceae) and antioxidant activity by 1,1,diphenyl-2-picryl hydrazyl (DPPH) radical scavenging method. The preliminary phytochemical screening showed the presence of several phytochemicals including alkaloids, glycosides, flavonoids, steroids, phenolic compounds and tannins. The ethanol and aqueous extracts of roots and leaves of Trewia nudiflora showed significant antioxidant activity compared to standard drug ascorbic acid.

  11. TANK48 CFD MODELING ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.

    2011-05-17

    The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank to ensure uniformity of the discharge stream. Mixing is accomplished with one to four dual-nozzle slurry pumps located within the tank liquid. For the work, a Tank 48 simulation model with a maximum of four slurry pumps in operation has been developed to estimate flow patterns for efficient solid mixing. The modeling calculations were performed by using two modeling approaches. One approach is a single-phase Computational Fluid Dynamics (CFD) model to evaluate the flow patterns and qualitative mixing behaviors for a range of different modeling conditions since the model was previously benchmarked against the test results. The other is a two-phase CFD model to estimate solid concentrations in a quantitative way by solving the Eulerian governing equations for the continuous fluid and discrete solid phases over the entire fluid domain of Tank 48. The two-phase results should be considered as the preliminary scoping calculations since the model was not validated against the test results yet. A series of sensitivity calculations for different numbers of pumps and operating conditions has been performed to provide operational guidance for solids suspension and mixing in the tank. In the analysis, the pump was assumed to be stationary. Major solid obstructions including the pump housing, the pump columns, and the 82 inch central support column were included. The steady state and three-dimensional analyses with a two-equation turbulence model were performed with FLUENT{trademark} for the single-phase approach and CFX for the two-phase approach. Recommended operational guidance was developed assuming that local fluid velocity can be used as a measure of sludge suspension and spatial mixing under single-phase tank model. For quantitative analysis, a two-phase fluid-solid model was developed for the same modeling conditions as the single

  12. CONSTRUCTION OF THE CHINESE LEARNERS' PARALLEL CORPUS OF JAPANESE AND ITS PRELIMINARY ANALYSIS

    Directory of Open Access Journals (Sweden)

    Masatake Dantsuji

    2004-01-01

    Full Text Available This study aims to introduce the project to construct the Chinese learners' corpus (LC of Japanese at Dalian University of Technology (DUT, and detail the LC construction, development of DUT Corpus Linguistics Tools, and contribution to the education of Japanese as a second language. The outstanding characteristic of the LC is its parallel form with learners' Japanese texts and their Chinese translation, which enables us to make comprehensive analysis of the influence of Chinese (L1 to Japanese (L2. We have made a preliminary analysis of the errors contained.

  13. Preliminary Design and Analysis of the ARES Atmospheric Flight Vehicle Thermal Control System

    Science.gov (United States)

    Gasbarre, J. F.; Dillman, R. A.

    2003-01-01

    The Aerial Regional-scale Environmental Survey (ARES) is a proposed 2007 Mars Scout Mission that will be the first mission to deploy an atmospheric flight vehicle (AFV) on another planet. This paper will describe the preliminary design and analysis of the AFV thermal control system for its flight through the Martian atmosphere and also present other analyses broadening the scope of that design to include other phases of the ARES mission. Initial analyses are discussed and results of trade studies are presented which detail the design process for AFV thermal control. Finally, results of the most recent AFV thermal analysis are shown and the plans for future work are discussed.

  14. Preliminary Regional Analysis of the Kaguya Lunar Radar Sounder (LRS) Data through Eastern Mare Imbrium

    Science.gov (United States)

    Cooper, B.L.; Antonenko, I.; Yamaguchi, Y.; Osinski, G.; Ono, T.; Ku-mamoto, A.

    2009-01-01

    The Lunar Radar Sounder (LRS) experiment on board the Kaguya spacecraft is observing the subsurface structure of the Moon, using ground-penetrating radar operating in the frequency range of 5 MHz [1]. Because LRS data provides in-formation about lunar features below the surface, it allows us to improve our understanding of the processes that formed the Moon, and the post-formation changes that have occurred (such as basin formation and volcanism). We look at a swath of preliminary LRS data, that spans from 7 to 72 N, and from 2 to 10 W, passing through the eastern portion of Mare Imbrium (Figure 1). Using software, designed for the mineral exploration industry, we produce a preliminary, coarse 3D model, showing the regional structure beneath the study area. Future research will involve smaller subsets of the data in regions of interest, where finer structures, such as those identified in [2], can be studied.

  15. A preliminary model to avoid the overestimation of sample size in bioequivalence studies.

    Science.gov (United States)

    Ramírez, E; Abraira, V; Guerra, P; Borobia, A M; Duque, B; López, J L; Mosquera, B; Lubomirov, R; Carcas, A J; Frías, J

    2013-02-01

    Often the only available data in literature for sample size estimations in bioequivalence studies is intersubject variability, which tends to result in overestimation of sample size. In this paper, we proposed a preliminary model of intrasubject variability based on intersubject variability for Cmax and AUC data from randomized, crossovers, bioequivalence (BE) studies. From 93 Cmax and 121 AUC data from test-reference comparisons that fulfilled BE criteria, we calculated intersubject variability for the reference formulation and intrasubject variability from ANOVA. Lineal and exponential models (y=a(1-e-bx)) were fitted weighted by the inverse of the variance, to predict the intrasubject variability based on intersubject variability. To validate the model we calculated the coefficient of cross-validation of data from 30 new BE studies. The models fit very well (R2=0.997 and 0.990 for Cmax and AUC respectively) and the cross-validation correlation were 0.847 for Cmax and 0.572 for AUC. A preliminary model analyses allow us to estimate the intrasubject variability based on intersubject variability for sample size calculation purposes in BE studies. This approximation provides an opportunity for sample size reduction avoiding unnecessary exposure of healthy volunteers. Further modelling studies are desirable to confirm these results especially suggestions of the higher intersubject variability range.

  16. Frictional sliding in layered rock model: Preliminary experiments. Yucca Mountain Site Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Perry, K.E. Jr.; Buescher, B.J.; Anderson, D.; Epstein, J.S. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1995-09-01

    An important aspect of determining the suitability of Yucca Mountain as a possible nuclear waste repository requires understanding the mechanical behavior of jointed rock-masses. To this end we have studied the frictional sliding between simulated rock joints in the laboratory using the technique of phase shifting moire interferometry. The models were made from stacks of Lexan plates and contained a central hole to induce slip between the plates when the models were loaded in compression. These preliminary results confirm the feasibility of the approach and show a clear evolution of slip as function of load.

  17. Multidisciplinary High-Fidelity Analysis and Optimization of Aerospace Vehicles. Part 2; Preliminary Results

    Science.gov (United States)

    Walsh, J. L.; Weston, R. P.; Samareh, J. A.; Mason, B. H.; Green, L. L.; Biedron, R. T.

    2000-01-01

    An objective of the High Performance Computing and Communication Program at the NASA Langley Research Center is to demonstrate multidisciplinary shape and sizing optimization of a complete aerospace vehicle configuration by using high-fidelity finite-element structural analysis and computational fluid dynamics aerodynamic analysis in a distributed, heterogeneous computing environment that includes high performance parallel computing. A software system has been designed and implemented to integrate a set of existing discipline analysis codes, some of them computationally intensive, into a distributed computational environment for the design of a high-speed civil transport configuration. The paper describes both the preliminary results from implementing and validating the multidisciplinary analysis and the results from an aerodynamic optimization. The discipline codes are integrated by using the Java programming language and a Common Object Request Broker Architecture compliant software product. A companion paper describes the formulation of the multidisciplinary analysis and optimization system.

  18. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    DYKES, A.A.

    2000-10-11

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

  19. Multifractal detrended fluctuation analysis of human EEG: preliminary investigation and comparison with the wavelet transform modulus maxima technique.

    Directory of Open Access Journals (Sweden)

    Todd Zorick

    Full Text Available Recently, many lines of investigation in neuroscience and statistical physics have converged to raise the hypothesis that the underlying pattern of neuronal activation which results in electroencephalography (EEG signals is nonlinear, with self-affine dynamics, while scalp-recorded EEG signals themselves are nonstationary. Therefore, traditional methods of EEG analysis may miss many properties inherent in such signals. Similarly, fractal analysis of EEG signals has shown scaling behaviors that may not be consistent with pure monofractal processes. In this study, we hypothesized that scalp-recorded human EEG signals may be better modeled as an underlying multifractal process. We utilized the Physionet online database, a publicly available database of human EEG signals as a standardized reference database for this study. Herein, we report the use of multifractal detrended fluctuation analysis on human EEG signals derived from waking and different sleep stages, and show evidence that supports the use of multifractal methods. Next, we compare multifractal detrended fluctuation analysis to a previously published multifractal technique, wavelet transform modulus maxima, using EEG signals from waking and sleep, and demonstrate that multifractal detrended fluctuation analysis has lower indices of variability. Finally, we report a preliminary investigation into the use of multifractal detrended fluctuation analysis as a pattern classification technique on human EEG signals from waking and different sleep stages, and demonstrate its potential utility for automatic classification of different states of consciousness. Therefore, multifractal detrended fluctuation analysis may be a useful pattern classification technique to distinguish among different states of brain function.

  20. Preliminary Evaluation of MapReduce for High-Performance Climate Data Analysis

    Science.gov (United States)

    Duffy, D. Q.; Schnase, J. L.; Clune, T. L.; Kim, E. J.; Freeman, S. M.; Thompson, J. H.; Hunter, K. A.; Theriot, M. E.

    2011-12-01

    Data intensive analytic workflows bridge between the largely unstructured mass of stored scientific data and the highly structured, tailored, reduced, and refined products used by scientists in their research. In general, the initial steps of an analysis, those operations that first interact with a data repository, tend to be the most general, while data manipulations closer to the client tend to be the most specialized to the individual, to the domain, or to the science question under study. The amount of data being operated on also tends to be larger on the repository-side of the workflow, smaller toward the client-side end products. We are using MapReduce to exploit this natural stratification, optimize efficiencies along the workflow chain, and provide a preliminary qualitative and quantitative assessment of MapReduce as a means of enabling server-side, distributed climate data analysis. MapReduce is a model for distributed storage and computation that seeks to improve efficiencies of the near-archive operations that initiate workflows. Simply put, MapReduce stores chunked data on disks with associated processors in such a way that operations on the chunked data can occur in parallel and return meaningfully aggregated results. While MapReduce has proven effective for large repositories of textual data, its use in data intensive science applications has been limited, because many scientific data sets are inherently complex, have high dimensionality, and use binary formats. We are using Apache's open-source Hadoop software implementation of MapReduce on top of the Hadoop Filesystem in our evaluation. Our analyses focus on soil moisture, precipitation, and atmospheric water-vapor, important classes of observation- and simulation-derived data products. The specific data sets being used in the evaluation include MERRA monthly precipitation and soil moisture products; the MODIS Atmospheres, 8-day global water-vapor product; and the SMOS 3-day global soil moisture

  1. Preliminary assessment of the behavioral activation model in Japanese undergraduate students.

    Science.gov (United States)

    Takagaki, Koki; Okajima, Isa; Kunisato, Yoshihiko; Nakajima, Shun; Kanai, Yoshihiro; Ishikawa, Shin-Ichi; Sakano, Yuji

    2013-02-01

    Many studies have reported that behavioral activation is an effective intervention for depression. The behavioral activation model is based on several formulations. For example, depressive mood leads to avoidant behaviors, avoidance negatively affects social contacts, decreased socialization lessens opportunities for positive reinforcement, and a decrease in positive reinforcement results in more depressive mood. The purpose of this study was to examine relationships among avoidant behavior, social contact, frequency of positive reinforcement, and depressive mood by using structural equation modeling to assess support for aspects of this behavioral activation model. Participants were 630 Japanese undergraduate students and vocational school students. Results provided preliminary support for the model. Treating both avoidance and activating behavior might contribute to decreased impairment.

  2. Stock assessment of Haliporoides triarthrus (Fam. Solenoceridae) off Mozambique: a preliminary analysis

    OpenAIRE

    Torstensen, E.; Pacule, H.

    1992-01-01

    The pink shrimp, Haliporoides triarthrus, is an important species in the deep-water shrimp fishery in Mozambique. Total catches are in the range of 1,500 to 2,700 tons, with the pink shrimp accounting for 70-90%. Estimates of growth parameters and of natural mortality are used for a preliminary assessment of the fishery, based on length-structured virtual population analysis and yield-per-recruit analyses. With an arbitrarily chosen terminal fishing mortality F, the results indicate a situati...

  3. Preliminary Analysis of Liquid Metal MHD Pressure Drop in the Blanket for the FDS

    Institute of Scientific and Technical Information of China (English)

    王红艳; 吴宜灿; 何晓雄

    2002-01-01

    Preliminary analysis and calculation of liquid metal Li17Pb83 magnetohydrodynamic (MHD) pressure drop in the blanket for the FDS have been presented to evaluate the significance of MHD effects on the thermal-hydraulic design of the blanket. To decrease the liquid metal MHD pressure drop, Al2O3 is applied as an electronically insulated coating onto the inner surface of the ducts. The requirement for the insulated coating to reduce the additional leakage pressure drop caused by coating imperfections has been analyzed. Finally, the total liquid metal MHD pressure drop and magnetic pump power in the FDS blanket have been given.

  4. Preliminary performance analysis of a transverse flow spectrally selective two-slab packed bed volumetric receiver

    CSIR Research Space (South Africa)

    Roos, TH

    2016-05-01

    Full Text Available stream_source_info Roos_2016_ABSTRACT.pdf.txt stream_content_type text/plain stream_size 2694 Content-Encoding UTF-8 stream_name Roos_2016_ABSTRACT.pdf.txt Content-Type text/plain; charset=UTF-8 21st SolarPACES... International Conference (SolarPACES 2015), 13-16 October 2015 Preliminary Performance Analysis of a Transverse Flow Spectrally Selective Two-slab Packed Bed Volumetric Receiver Thomas H. Roos1, a) and Thomas M. Harms2, b) 1Aeronautical Systems...

  5. Preliminary Report: Analysis of the baseline study on the prevalence of Salmonella in laying hen flocks of Gallus gallus

    DEFF Research Database (Denmark)

    Hald, Tine

    This is a preliminary report on the analysis of the Community-wide baseline study to estimate the prevalence of Salmonella in laying hen flocks. It is being published pending the full analysis of the entire dataset from the baseline study. The report contains the elements necessary for the establ......This is a preliminary report on the analysis of the Community-wide baseline study to estimate the prevalence of Salmonella in laying hen flocks. It is being published pending the full analysis of the entire dataset from the baseline study. The report contains the elements necessary...

  6. A biogeochemical model of Lake Pusiano (North Italy and its use in the predictability of phytoplankton blooms: first preliminary results

    Directory of Open Access Journals (Sweden)

    Alessandro OGGIONI

    2006-02-01

    Full Text Available This study reports the first preliminary results of the DYRESM-CAEDYM model application to a mid size sub-alpine lake (Lake Pusiano North Italy. The in-lake modelling is a part of a more general project called Pusiano Integrated Lake/Catchment project (PILE whose final goal is to understand the hydrological and trophic relationship between lake and catchment, supporting the restoration plan of the lake through field data analysis and numerical models. DYRESM is a 1D-3D hydrodynamics model for predicting the vertical profile of temperature, salinity and density. CAEDYM is multi-component ecological model, used here as a phytoplankton-zooplankton processes based model, which includes algorithms to simulate the nutrient cycles within the water column as well as the air-water gas exchanges and the water-sediments fluxes. The first results of the hydrodynamics simulations underline the capability of the model to accurately simulate the surface temperature seasonal trend and the thermal gradient whereas, during summer stratification, the model underestimates the bottom temperature of around 2 °C. The ecological model describes the epilimnetic reactive phosphorus (PO4 depletion (due to the phytoplankton uptake and the increase in PO4 concentrations in the deepest layers of the lake (due to the mineralization processes and the sediments release. In terms of phytoplankton dynamics the model accounts for the Planktothrix rubescens dominance during the whole season, whereas it seems to underestimate the peak in primary production related to both the simulated algal groups (P. rubescens and the rest of the other species aggregated in a single class. The future aims of the project are to complete the model parameterization and to connect the in-lake and the catchment modelling in order to gain an integrated view of the lake-catchment ecosystem as well as to develop a three dimensional model of the lake.

  7. Heterosexual male perpetrators of childhood sexual abuse: a preliminary neuropsychiatric model.

    Science.gov (United States)

    Cohen, Lisa J; Nikiforov, Konstantin; Gans, Sniezyna; Poznansky, Olga; McGeoch, Pamela; Weaver, Carrie; King, Enid Gertmanian; Cullen, Ken; Galynker, Igor

    2002-01-01

    This paper presents data from a series of preliminary neuropsychiatric studies, including neuropsychological, personality, sexual history, plethysmographic and neuroimaging investigations, on a sample of 22 male, heterosexual, nonexclusive pedophiles and 24 demographically similar healthy controls. A psychobiological model of pedophilia is proposed, positing that early childhood sexual abuse leads to neurodevelopmental abnormalities in the temporal regions mediating sexual arousal and erotic discrimination and the frontal regions mediating the cognitive aspects of sexual desire and behavioral inhibition. In this way, pedophiles develop deviant pedophilic arousal. Subsequently, if there is comorbid personality pathology, specifically sociopathy and cognitive distortions, there will be failure to inhibit pedophilic behavior.

  8. A dispersion model approach to the preliminary design of adsorber beds for trace contaminants

    Science.gov (United States)

    Madey, R.; Czayka, M.; Forsythe, R.; Povlis, J.; Yin, K.

    1976-01-01

    It is shown that a dispersion model for the transport of a gas through a porous medium can be useful in the preliminary design of adsorber beds for the control of trace contaminants. The transmission function is considered, taking into account the transmission of 102-ppm acetaldehyde in helium flowing at various flow rates through an absorber bed. The experiments were conducted at a temperature of 25.0 C. Attention is given to a representation of the experimental breakthrough curve, the volume adsorption capacity, temperature studies, and correlations.

  9. Preliminary In-Flight Loads Analysis of In-Line Launch Vehicles using the VLOADS 1.4 Program

    Science.gov (United States)

    Graham, J. B.; Luz, P. L.

    1998-01-01

    To calculate structural loads of in-line launch vehicles for preliminary design, a very useful computer program is VLOADS 1.4. This software may also be used to calculate structural loads for upper stages and planetary transfer vehicles. Launch vehicle inputs such as aerodynamic coefficients, mass properties, propellants, engine thrusts, and performance data are compiled and analyzed by VLOADS to produce distributed shear loads, bending moments, axial forces, and vehicle line loads as a function of X-station along the vehicle's length. Interface loads, if any, and translational accelerations are also computed. The major strength of the software is that it enables quick turnaround analysis of structural loads for launch vehicles during the preliminary design stage of its development. This represents a significant improvement over the alternative-the time-consuming, and expensive chore of developing finite element models. VLOADS was developed as a Visual BASIC macro in a Microsoft Excel 5.0 work book on a Macintosh. VLOADS has also been implemented on a PC computer using Microsoft Excel 7.0a for Windows 95. VLOADS was developed in 1996, and the current version was released to COSMIC, NASA's Software Technology Transfer Center, in 1997. The program is a copyrighted work with all copyright vested in NASA.

  10. SDI CFD MODELING ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.

    2011-05-05

    The Savannah River Remediation (SRR) Organization requested that Savannah River National Laboratory (SRNL) develop a Computational Fluid Dynamics (CFD) method to mix and blend the miscible contents of the blend tanks to ensure the contents are properly blended before they are transferred from the blend tank; such as, Tank 50H, to the Salt Waste Processing Facility (SWPF) feed tank. The work described here consists of two modeling areas. They are the mixing modeling analysis during miscible liquid blending operation, and the flow pattern analysis during transfer operation of the blended liquid. The transient CFD governing equations consisting of three momentum equations, one mass balance, two turbulence transport equations for kinetic energy and dissipation rate, and one species transport were solved by an iterative technique until the species concentrations of tank fluid were in equilibrium. The steady-state flow solutions for the entire tank fluid were used for flow pattern analysis, for velocity scaling analysis, and the initial conditions for transient blending calculations. A series of the modeling calculations were performed to estimate the blending times for various jet flow conditions, and to investigate the impact of the cooling coils on the blending time of the tank contents. The modeling results were benchmarked against the pilot scale test results. All of the flow and mixing models were performed with the nozzles installed at the mid-elevation, and parallel to the tank wall. From the CFD modeling calculations, the main results are summarized as follows: (1) The benchmark analyses for the CFD flow velocity and blending models demonstrate their consistency with Engineering Development Laboratory (EDL) and literature test results in terms of local velocity measurements and experimental observations. Thus, an application of the established criterion to SRS full scale tank will provide a better, physically-based estimate of the required mixing time, and

  11. Preliminary analysis of mortality associated with rituximab use in autoimmune diseases.

    Science.gov (United States)

    Shetty, Shawn; Ahmed, A R

    2013-12-01

    Normal antibodies and pathogenic autoantibodies are produced by B-cells and plasma cells. Rituximab is a chimeric monoclonal antibody that targets the CD20 molecule on cells that express them on their surface and kills them. Rituximab has been increasingly used to treat several autoimmune diseases. Studies on fatal outcomes associated with rituximab therapy are lacking. A comprehensive and detailed analysis in which the multiple factors that could contribute to a fatal outcome in all the autoimmune diseases in which rituximab has been used would be cumbersome, lack uniformity and would prove difficult in making certain definitive conclusions and comparisons, but more importantly it would not allow to provide specific precautions and recommendations to prevent mortality. Hence, autoimmune mucocutaneous blistering diseases (AMBD) were used as model to study fatal outcomes in patients treated with rituximab between 2000 and 2013, using uniform 13 criteria. Fatal outcomes were found in 14 patients with autoimmune blistering diseases out of 134 patients (10.4%). Patients died due to infections (75%), gastrointestinal (17%) and cardiac events (8%). Causes of death were reported in 101 patients with other autoimmune diseases out of 4320 with a mortality rate of 2.4%. Among them, 44 patients (43.6%) died from infections. A statistical analysis of the data demonstrated that a statistically significant higher mortality rate was observed in patients with AMBD compared to patients with other autoimmune diseases. Similarly, a statistically significant higher rate of death due to infections was reported in patients with AMBD compared to patients with other autoimmune diseases. Use of systemic corticosteroids and immunosuppressive agents as concomitant therapy with rituximab enhanced immunosuppression. In many patients, B-cells were depleted for prolonged periods, even after clinical recovery was observed. Although its main action is depletion of B-cells, rituximab has a

  12. CRIER, a relative analysis tool for preliminary screening of complex industrial waste and effluents

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, P.D.; Brucher, S.; Melanson, P. [Concordia Univ., Montreal, Quebec (Canada). Ecotoxicology Program

    1994-12-31

    CRIER (Chemrisk, a Relative Index for Evaluating Risk), a Windows{trademark}-based program for the preliminary screening of potential risk to aquatic ecosystems, has been developed at the Center of Environmental Chemistry and Ecotoxicology (CECE) in Concordia. This tool, originally designed for environmental management government bodies, was designed to screen chemical compounds found in industrial aqueous effluents, for their potential to cause harm to some selected target species such as the rainbow trout (Oncorhynchus mykiss). This revised model will be applicable in both regulatory and industrial managements as an expert system that provides an assessment based on the most up-to-date toxicological information regarding each compound. Some major characteristics include the consideration of partitioning, plume effect, bioavailability and bioconcentration capacity in producing an evaluation of potential for harm to freshwater species. When parameters are empirically unavailable from the diverse databases, QSARs are used to produce theoretical preliminary estimates of the missing values. one aspect of the model allows consideration of the combined toxicity of organic congeners. Case studies are used in demonstrating the capacities of this model.

  13. Damage detection and quantification using mode curvature variation on framed structures: analysis of the preliminary results

    Science.gov (United States)

    Iacovino, Chiara; Ditommaso, Rocco; Auletta, Gianluca; Ponzo, Felice C.

    2017-04-01

    Continuous monitoring based on vibrational identification methods is increasingly employed for the evaluation of the state of health of existing buildings after strong motion earthquake. Different damage identification methods are based on the variations of damage indices defined in terms modal (eigenfrequencies, mode shapes, and modal damping) and/or non-modal parameters. Most of simplified methods for structural health monitoring and damage detection are based on the evaluation of the dynamic characteristics evolution associated to the fundamental mode of vibration of a monitored structure. Aim of this work is the upgrade of an existing method for damage localization on framed structures during a moderate/destructive earthquake. The existing version of the method is based on the comparison of the geometric characteristics (with particular reference to the mode curvature) exhibited by the structures, related to fundamental mode of vibration, before and during an earthquake. The approach is based on the use of a nonlinear filter, the band-variable filter, based on the Stockwell Transform able to extract the nonlinear response of each mode of vibration. The new version of the method provides the possibility to quantify a possible damage occurred on the monitored structure linking the mode curvature variation with the maximum inter-story drift. This paper shows the preliminary results obtained from several simulations on nonlinear numerical models of reinforced concrete framed structures, designed for only gravity loads, without and with the presence of infill panels. Furthermore, a correlation between maximum mode curvature difference and maximum inter-story drift has been defined for the different numerical models in order to quantify the structural damage. Acknowledgements This study was partially funded by the Italian Department of Civil Protection within the project DPC-RELUIS 2016 - RS4 ''Seismic observatory of structures and health monitoring'' and by the

  14. Preliminary phytochemical screening, Antibacterial potential and GC-MS analysis of two medicinal plant extracts.

    Science.gov (United States)

    Vijayaram, Seerangaraj; Kannan, Suruli; Saravanan, Konda Mani; Vasantharaj, Seerangaraj; Sathiyavimal, Selvam; P, Palanisamy Senthilkumar

    2016-05-01

    The presence study was aimed to catalyze the primary metabolites and their confirmation by using GC-MS analysis and antibacterial potential of leaf extract of two important medicinal plant viz., Eucalyptus and Azadirachta indica. The antibacterial potential of the methanol leaf extract of the studied species was tested against Escherichia coli, Pseudomonas aeruginosa, Klebsiellap neumoniae, Streptococcus pyogens, Staphylococcus aureus using by agar well diffusion method. The higher zone of inhibition (16mm) was observed against the bacterium Pseudomonas aeruginosa at 100μl concentration of methanol leaf extract. Preliminary phytochemical analysis of studied species shows that presence of phytochemical compounds like steroids, phenolic compounds and flavonoids. GC-MS analysis confirms the occurrence of 20 different compounds in the methanol leaf extract of the both studied species.

  15. 1972 preliminary safety analysis report based on a conceptual design of a proposed repository in Kansas

    Energy Technology Data Exchange (ETDEWEB)

    Blomeke, J.O.

    1977-08-01

    This preliminary safety analysis report is based on a proposed Federal Repository at Lyons, Kansas, for receiving, handling, and depositing radioactive solid wastes in bedded salt during the remainder of this century. The safety analysis applies to a hypothetical site in central Kansas identical to the Lyons site, except that it is free of nearby salt solution-mining operations and bore holes that cannot be plugged to Repository specifications. This PSAR contains much information that also appears in the conceptual design report. Much of the geological-hydrological information was gathered in the Lyons area. This report is organized in 16 sections: considerations leading to the proposed Repository, design requirements and criteria, a description of the Lyons site and its environs, land improvements, support facilities, utilities, different impacts of Repository operations, safety analysis, design confirmation program, operational management, requirements for eventually decommissioning the facility, design criteria for protection from severe natural events, and the proposed program of experimental investigations. (DLC)

  16. Preliminary Cluster Analysis For Several Representatives Of Genus Kerivoula (Chiroptera: Vespertilionidae) in Borneo

    Science.gov (United States)

    Hasan, Noor Haliza; Abdullah, M. T.

    2008-01-01

    The aim of the study is to use cluster analysis on morphometric parameters within the genus Kerivoula to produce a dendrogram and to determine the suitability of this method to describe the relationship among species within this genus. A total of 15 adult male individuals from genus Kerivoula taken from sampling trips around Borneo and specimens kept at the zoological museum of Universiti Malaysia Sarawak were examined. A total of 27 characters using dental, skull and external body measurements were recorded. Clustering analysis illustrated the grouping and morphometric relationships between the species of this genus. It has clearly separated each species from each other despite the overlapping of measurements of some species within the genus. Cluster analysis provides an alternative approach to make a preliminary identification of a species.

  17. The purification, crystallization and preliminary X-ray diffraction analysis of dihydrodipicolinate synthase from Clostridium botulinum

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, Renwick C. J., E-mail: rdobson@unimelb.edu.au; Atkinson, Sarah C. [Department of Biochemistry and Molecular Biology, University of Melbourne, Parkville, Victoria 3010 (Australia); Bio21 Molecular Science and Biotechnology Institute, 30 Flemington Road, University of Melbourne, Parkville, Victoria 3010 (Australia); Gorman, Michael A. [St Vincents Institute, 9 Princes Street, Fitzroy, Victoria 3065 (Australia); Newman, Janet M. [CSIRO Division of Molecular and Health Technologies, 343 Royal Parade, Parkville, Victoria 3052 (Australia); Parker, Michael W. [Department of Biochemistry and Molecular Biology, University of Melbourne, Parkville, Victoria 3010 (Australia); Bio21 Molecular Science and Biotechnology Institute, 30 Flemington Road, University of Melbourne, Parkville, Victoria 3010 (Australia); St Vincents Institute, 9 Princes Street, Fitzroy, Victoria 3065 (Australia); Perugini, Matthew A. [Department of Biochemistry and Molecular Biology, University of Melbourne, Parkville, Victoria 3010 (Australia); Bio21 Molecular Science and Biotechnology Institute, 30 Flemington Road, University of Melbourne, Parkville, Victoria 3010 (Australia)

    2008-03-01

    Dihydrodipicolinate synthase (DHDPS), an enzyme in the lysine-biosynthetic pathway, is a promising target for antibiotic development against pathogenic bacteria. Here, the expression, purification, crystallization and preliminary diffraction analysis of DHDPS from C. botulinum are reported. In recent years, dihydrodipicolinate synthase (DHDPS; EC 4.2.1.52) has received considerable attention from both mechanistic and structural viewpoints. This enzyme, which is part of the diaminopimelate pathway leading to lysine, couples (S)-aspartate-β-semialdehyde with pyruvate via a Schiff base to a conserved active-site lysine. In this paper, the expression, purification, crystallization and preliminary X-ray diffraction analysis of DHDPS from Clostridium botulinum, an important bacterial pathogen, are presented. The enzyme was crystallized in a number of forms, predominantly using PEG precipitants, with the best crystal diffracting to beyond 1.9 Å resolution and displaying P4{sub 2}2{sub 1}2 symmetry. The unit-cell parameters were a = b = 92.9, c = 60.4 Å. The crystal volume per protein weight (V{sub M}) was 2.07 Å{sup 3} Da{sup −1}, with an estimated solvent content of 41%. The structure of the enzyme will help guide the design of novel therapeutics against the C. botulinum pathogen.

  18. A Preliminary Analysis of Reactor Performance Test (LOEP) for a Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeonil; Park, Su-Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The final phase of commissioning is reactor performance test, which is to prove the integrated performance and safety of the research reactor at full power with fuel loaded such as neutron power calibration, Control Absorber Rod/Second Shutdown Rod drop time, InC function test, Criticality, Rod worth, Core heat removal with natural mechanism, and so forth. The last test will be safety-related one to assure the result of the safety analysis of the research reactor is marginal enough to be sure about the nuclear safety by showing the reactor satisfies the acceptance criteria of the safety functions such as for reactivity control, maintenance of auxiliaries, reactor pool water inventory control, core heat removal, and confinement isolation. After all, the fuel integrity will be ensured by verifying there is no meaningful change in the radiation levels. To confirm the performance of safety equipment, loss of normal electric power (LOEP), possibly categorized as Anticipated Operational Occurrence (AOO), is selected as a key experiment to figure out how safe the research reactor is before turning over the research reactor to the owner. This paper presents a preliminary analysis of the reactor performance test (LOEP) for a research reactor. The results showed how different the transient between conservative estimate and best estimate will look. Preliminary analyses have shown all probable thermal-hydraulic transient behavior of importance as to opening of flap valve, minimum critical heat flux ratio, the change of flow direction, and important values of thermal-hydraulic parameters.

  19. Preliminary design and thermal analysis of device for finish cooling Jaffa biscuits in a.d. 'Jaffa'- Crvenka

    Directory of Open Access Journals (Sweden)

    Salemović Duško R.

    2015-01-01

    Full Text Available In this paper preliminary design of device for finish cooling chocolate topping of biscuits in A.D. 'Jaffa'- Crvenka was done. The proposed preliminary design followed by the required technological process of finish cooling biscuits and required parameters of process which was supposed to get and which represented part of project task. Thermal analysis was made and obtained percentage error between surface contact of the air and chocolate topping, obtained from heat balance and geometrical over proposed preliminary design, wasn't more than 0.67%. This is a preliminary design completely justified because using required length of belt conveyor receive required temperature of chocolate topping at the end of the cooling process.

  20. A Preliminary Analysis of Dose Rates Associated with ITER CVCS Equipment/Area Location

    Energy Technology Data Exchange (ETDEWEB)

    Blakeman, Edward D [ORNL; Ilas, Dan [ORNL; Petrov, Andrei Y [ORNL

    2012-03-01

    A preliminary analysis of the ITER Chemical and Volume Control System (CVCS) Area was performed to assess dose rates outside the walls and ceiling of the facility after 1.5 years of operation at shutdown, 2 days, and 10 days after shutdown. For this purpose a simplified Monte Carlo computer model was developed using the MCNP (MCNP5 Ver. 1.51) code. Two components are included: the smaller filter tank and the larger ion exchanger. These pieces of equipment are associated with the Integrated Blanket ELM Divertor Primary Heat Transfer System, which will have the largest dose rates associated with activated corrosion products during operation in comparison with other systems. The ion exchanger contained two source regions, a 1.2-m-thick resin bed above a 0.55 m-thick skirt, and a 0.8-m-thick water region. The filter constituted an additional source. Thus the model consisted of three sources (filter, resin, water), homogeneously distributed within the appropriate source regions. However, much of the results (that address individual isotopes) are presented with the two sources in the ion exchanger combined. In these cases the sources are referred to as the 'ion exchanger source' and the 'filter source.' Dimensions for the facility and components, as well as source isotopes and strengths, and material densities, were supplied by US ITER. Because of its simplification, the model does not contain pipes. Consequently, radiation streaming through pipe penetrations, radiation emanating from the pipes, and shielding from the pipes were not considered in this analysis. Dose rates on the outside of two walls and the ceiling were calculated. The two walls are labeled as the 'long' wall (aligned with the X-axis) and the 'short' wall (aligned with the Y-axis). These walls and ceiling were nominally set to 30-cm-thick concrete. In the original analysis, standard concrete (2.3 g/cc density) was used. In addition to the shielding walls/ceiling, a

  1. Treatment by gliding arc of epoxy resin: preliminary analysis of surface modifications

    Science.gov (United States)

    Faubert, F.; Wartel, M.; Pellerin, N.; Pellerin, S.; Cochet, V.; Regnier, E.; Hnatiuc, B.

    2016-12-01

    Treatments with atmospheric pressure non-thermal plasma are easy to implement and inexpensive. Among them gliding arc (GlidArc) remains rarely used in surface treatment of polymers. However, it offers economic and flexible way to treat quickly large areas. In addition the choice of carrier gas makes it possible to bring the active species and other radicals allowing different types of grafting and functionalization of the treated surfaces, for example in order to apply for anti-biofouling prevention. This preliminary work includes analysis of the surface of epoxy resins by infrared spectroscopy: the different affected chemical bonds were studied depending on the duration of treatment. The degree of oxidation (the C/O ratio) is obtained by X-ray microanalysis and contact angle analysis have been performed to determinate the wettability properties of the treated surface. A spectroscopic study of the plasma allows to determine the possible active species in the different zones of the discharge.

  2. Los Alamos National Laboratory corregated metal pipe saw facility preliminary safety analysis report. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-09-19

    This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

  3. Preliminary Uncertainty Analysis for SMART Digital Core Protection and Monitoring System

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Bon Seung; In, Wang Kee; Hwang, Dae Hyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    The Korea Atomic Energy Research Institute (KAERI) developed on-line digital core protection and monitoring systems, called SCOPS and SCOMS as a part of SMART plant protection and monitoring system. SCOPS simplified the protection system by directly connecting the four RSPT signals to each core protection channel and eliminated the control element assembly calculator (CEAC) hardware. SCOMS adopted DPCM3D method in synthesizing core power distribution instead of Fourier expansion method being used in conventional PWRs. The DPCM3D method produces a synthetic 3-D power distribution by coupling a neutronics code and measured in-core detector signals. The overall uncertainty analysis methodology which is used statistically combining uncertainty components of SMART core protection and monitoring system was developed. In this paper, preliminary overall uncertainty factors for SCOPS/SCOMS of SMART initial core were evaluated by applying newly developed uncertainty analysis method

  4. Preliminary cladistic analysis of genera of the cestode order Trypanorhyncha Diesing, 1863.

    Science.gov (United States)

    Beveridge, I; Campbell, R A; Palm, H W

    1999-01-01

    A preliminary cladistic analysis was carried out on the 49 currently recognised genera of the order Trypanorhyncha. Forty-four characters were analysed; a functional outgroup was used for scolex and strobilar characters, while Nybelinia was utilised to polarise characters related to the rhyncheal system. Eight well-resolved clades were evident in the resultant cladogram, which is compared with existing phenetic classifications. An analysis of families resulted in a similar clustering of taxa to that observed in the case of the genera. The results suggest that two key characters used in existing classifications, namely the presence of sensory fossettes on the bothridia and the development of atypical heteroacanth and poeciloacanth armatures from typical heteroacanth armatures, have occurred on several occasions. Some clades provide support for the arrangements used in current classifications. Suggestions are made for future avenues of research which might provide more robust phylogenetic data for the Trypanorhyncha.

  5. Preliminary Evaluation of MapReduce for High-Performance Climate Data Analysis

    Science.gov (United States)

    Duffy, Daniel Q.; Schnase, John L.; Thompson, John H.; Freeman, Shawn M.; Clune, Thomas L.

    2012-01-01

    MapReduce is an approach to high-performance analytics that may be useful to data intensive problems in climate research. It offers an analysis paradigm that uses clusters of computers and combines distributed storage of large data sets with parallel computation. We are particularly interested in the potential of MapReduce to speed up basic operations common to a wide range of analyses. In order to evaluate this potential, we are prototyping a series of canonical MapReduce operations over a test suite of observational and climate simulation datasets. Our initial focus has been on averaging operations over arbitrary spatial and temporal extents within Modern Era Retrospective- Analysis for Research and Applications (MERRA) data. Preliminary results suggest this approach can improve efficiencies within data intensive analytic workflows.

  6. Dimensions of Human-Work Domain Interaction: A Preliminary Analysis for the Design of a Corporate Digital Library.

    Science.gov (United States)

    Xie, Hong

    2003-01-01

    Applies the cognitive system engineering approach to investigate human-work interaction at a corporate setting. Reports preliminary analysis of data collected from diary analysis and interview of 20 subjects. Results identify three dimensions for each of four interactive activities involved in human-work interaction and their relationships.…

  7. Model Analysis ToolKit

    Energy Technology Data Exchange (ETDEWEB)

    2015-05-15

    MATK provides basic functionality to facilitate model analysis within the Python computational environment. Model analysis setup within MATK includes: - define parameters - define observations - define model (python function) - define samplesets (sets of parameter combinations) Currently supported functionality includes: - forward model runs - Latin-Hypercube sampling of parameters - multi-dimensional parameter studies - parallel execution of parameter samples - model calibration using internal Levenberg-Marquardt algorithm - model calibration using lmfit package - model calibration using levmar package - Markov Chain Monte Carlo using pymc package MATK facilitates model analysis using: - scipy - calibration (scipy.optimize) - rpy2 - Python interface to R

  8. The Geoengineering Model Intercomparison Project Phase 6 (GeoMIP6: simulation design and preliminary results

    Directory of Open Access Journals (Sweden)

    B. Kravitz

    2015-06-01

    simulations, and has been expanded to address several further important topics, including key uncertainties in extreme events, the use of geoengineering as part of a portfolio of responses to climate change, and the relatively new idea of cirrus cloud thinning to allow more longwave radiation to escape to space. We discuss experiment designs, as well as the rationale for those designs, showing preliminary results from individual models when available. We also introduce a new feature, called the GeoMIP Testbed, which provides a platform for simulations that will be performed with a few models and subsequently assessed to determine whether the proposed experiment designs will be adopted as core (Tier 1 GeoMIP experiments. This is meant to encourage various stakeholders to propose new targeted experiments that address their key open science questions, with the goal of making GeoMIP more relevant to a broader set of communities.

  9. Potential landslide activity affecting the archaeological site of Orongo (Easter Island-Chile): preliminary analysis

    Science.gov (United States)

    Margottini, C.; Delmonaco, G.; Spizzichino, D.; Pandolfi, O.; Crisostomo, R.; Nohe, S.

    2009-04-01

    landslide crowns are currently located in the same level some hundreds m at west, just below the plain where Orongo is founded, threatening the stability of the petroglyphs area. According to the above observations, although after preliminary superficial surveys, the potential landslide evolution of the area may be the following: i) slope toe affected by coastal erosion; ii) triggering of debris slide/fall in the middle-upper portion of the slope with failure depth of ca. 2.5-4m; iii) increasing of stress and retrogressive landslide activity (debris-slide) towards the crest zone. A possible development of the research will be based on implementation of a multi-temporal analysis of landslide activity through a 3D-GIS modeling coupled with a back analysis in order to define present slope stability conditions and possible evolution of the slope. This to provide useful tools for local authorities in implementing preventive landslide risk mitigation measures for the protection of the cultural heritage in Orongo.

  10. A Preliminary Study in Applying the Function-Based Intervention Decision Model in Consultation to Increase Treatment Integrity

    Science.gov (United States)

    Gann, Candace J.; Kunnavatana, S. Shanun

    2016-01-01

    This preliminary study investigated the use of the Function-Based Intervention Decision Model (Decision Model; Umbreit, Ferro, Liaupsin, & Lane, 2007) to improve teacher treatment integrity for a function-based classroom management plan. The participants were a special education teacher and three elementary-age students receiving special…

  11. Model Checking as Static Analysis

    DEFF Research Database (Denmark)

    Zhang, Fuyuan

    Both model checking and static analysis are prominent approaches to detecting software errors. Model Checking is a successful formal method for verifying properties specified in temporal logics with respect to transition systems. Static analysis is also a powerful method for validating program...... properties which can predict safe approximations to program behaviors. In this thesis, we have developed several static analysis based techniques to solve model checking problems, aiming at showing the link between static analysis and model checking. We focus on logical approaches to static analysis......-calculus can be encoded as the intended model of SFP. Our research results have strengthened the link between model checking and static analysis. This provides a theoretical foundation for developing a unied tool for both model checking and static analysis techniques....

  12. Preliminary failure modes and effects analysis on Korean HCCR TBS to be tested in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Mu-Young, E-mail: myahn74@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of); Jin, Hyung Gon; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Yi-Hyun; Lee, Youngmin [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    Highlights: • Postulated initiating events are identified through failure modes and effects analysis on the current HCCR TBS design. • A set of postulated initiating events are selected for consideration of deterministic analysis. • Accident evolutions on the selected postualted initiating events are qualitatively described for deterministic analysis. - Abstract: Korean Helium cooled ceramic reflector (HCCR) Test blanket system (TBS), which comprises Test blanket module (TBM) and ancillary systems in various locations of ITER building, is operated at high temperature and pressure with decay heat. Therefore, safety is utmost concern in design process and it is required to demonstrate that the HCCR TBS is designed to comply with the safety requirements and guidelines of ITER. Due to complexity of the system with many interfaces with ITER, a systematic approach is necessary for safety analysis. This paper presents preliminary failure modes and effects analysis (FMEA) study performed for the HCCR TBS. FMEA is a systematic methodology in which failure modes for components in the system and their consequences are studied from the bottom-up. Over eighty failure modes have been investigated on the HCCR TBS. The failure modes that have similar consequences are grouped as postulated initiating events (PIEs) and total seven reference accident scenarios are derived from FMEA study for deterministic accident analysis. Failure modes not covered here due to evolving design of the HCCR TBS and uncertainty in maintenance procedures will be studied further in near future.

  13. Field observations, preliminary model analysis, and aquifer thermal efficiency

    Science.gov (United States)

    Miller, R.T.; Delin, G.N.

    1993-01-01

    In May 1980, the University of Minnesota began a project to evaluate the feasibility of storing heated (150 degrees Celsius (°C) water in the deep (180 to 240 meters (m)) Franconia-Ironton-Galesville aquifer and later recovering it for space heating. The Aquifer Thermal-Energy Storage (ATES) system was a doublet-well design in which the injection and withdrawal wells were spaced approximately 250 m apart. High-temperature water from the university's steam-generation facilities supplied heat for injection. Water was pumped from one of the wells through a heat exchanger, where heat was added or removed. Water then was injected back into the aquifer through the other well. The experimental plan for testing the ATES system consisted of a series of short-term hot-water injection, storage, and withdrawal cycles. Each cycle was 24 days long, and each injection, storage, and withdrawal step of the cycle was 8 days.

  14. Expression, purification, crystallization and preliminary crystallographic analysis of the proliferation-associated protein Ebp1

    Energy Technology Data Exchange (ETDEWEB)

    Kowalinski, Eva; Bange, Gert; Wild, Klemens; Sinning, Irmgard, E-mail: irmi.sinning@bzh.uni-heidelberg.de [Heidelberg University Biochemistry Center, INF 328, D-69120 Heidelberg (Germany)

    2007-09-01

    Preliminary X-ray analysis of the proliferation-associated protein Ebp1 from Homo sapiens is provided. ErbB-3-binding protein 1 (Ebp1) is a member of the family of proliferation-associated 2G4 proteins (PA2G4s) and plays a role in cellular growth and differentiation. Ligand-induced activation of the transmembrane receptor ErbB3 leads to dissociation of Ebp1 from the receptor in a phosphorylation-dependent manner. The non-associated protein is involved in transcriptional and translational regulation in the cell. Here, the overexpression, purification, crystallization and preliminary crystallographic studies of Ebp1 from Homo sapiens are reported. Initially observed crystals were improved by serial seeding to single crystals suitable for data collection. The optimized crystals belong to the tetragonal space group P4{sub 1}2{sub 1}2 or P4{sub 3}2{sub 1}2 and diffracted to a resolution of 1.6 Å.

  15. Electron density analysis of the effects of sugars on the structure of lipid bilayers at low hydration - a preliminary study

    Energy Technology Data Exchange (ETDEWEB)

    Lenné, T.; Kent, B.; Koster, K.L.; Garvey, C.J.; Bryant, G. (ANSTO); (USD); (ANU); (RMIT)

    2012-02-06

    Small angle X-ray scattering is used to study the effects of sugars on membranes during dehydration. Previous work has shown that the bilayer and chain-chain repeat spacings of DPPC bilayers are relatively unaffected by the presence of sugars. In this work we present a preliminary analysis of the electron density profiles of DPPC in the presence of sugars at low hydration. The difficulties of determining the correct phasing are discussed. Sugars and other small solutes have been shown to have an important role in improving the tolerance of a range of species to desiccation and freezing. In particular it has been shown that sugars can stabilize membranes in the fluid membrane phase during dehydration, and in the fully dehydrated state. Equivalently, at a particular hydration, the presence of sugars lowers the transition temperature between the fluid and gel phases. There are two competing models for explaining the effects of sugars on membrane phase transition temperatures. One, designated the water replacement hypothesis (WRH) states that sugars hydrogen bond to phospholipid headgroups, thus hindering the fluid-gel phase transition. One version of this model suggests that certain sugars (such as trehalose) achieve the measured effects by inserting between the phospholipid head groups. An alternative model explains the observed effects of sugars in terms of the sugars effect on the hydration repulsion that develops between opposing membranes during dehydration. The hydration repulsion leads to a lateral compressive stress in the bilayer which squeezes adjacent lipids more closely together, resulting in a transition to the gel phase. When sugars are present, their osmotic and volumetric effects reduce the hydration repulsion, reduce the compressive stress in the membranes, and therefore tend to maintain the average lateral separation between lipids. This model is called the hydration forces explanation (HFE). We recently showed that neither mono- nor di

  16. Applications of Photogrammetry for Analysis of Forest Plantations. Preliminary study: Analysis of individual trees

    Science.gov (United States)

    Mora, R.; Barahona, A.; Aguilar, H.

    2015-04-01

    This paper presents a method for using high detail volumetric information, captured with a land based photogrammetric survey, to obtain information from individual trees. Applying LIDAR analysis techniques it is possible to measure diameter at breast height, height at first branch (commercial height), basal area and volume of an individual tree. Given this information it is possible to calculate how much of that tree can be exploited as wood. The main objective is to develop a methodology for successfully surveying one individual tree, capturing every side of the stem a using high resolution digital camera and reference marks with GPS coordinates. The process is executed for several individuals of two species present in the metropolitan area in San Jose, Costa Rica, Delonix regia (Bojer) Raf. and Tabebuia rosea (Bertol.) DC., each one with different height, stem shape and crown area. Using a photogrammetry suite all the pictures are aligned, geo-referenced and a dense point cloud is generated with enough detail to perform the required measurements, as well as a solid tridimensional model for volume measurement. This research will open the way to develop a capture methodology with an airborne camera using close range UAVs. An airborne platform will make possible to capture every individual in a forest plantation, furthermore if the analysis techniques applied in this research are automated it will be possible to calculate with high precision the exploit potential of a forest plantation and improve its management.

  17. A preliminary approach to the extension of the Transuranus code to the fuel rod performance analysis of HLM-cooled nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Luzzi, L.; Botazzoli, P.; Devita, M.; Di Marcello, V.; Pastore, G. [Department of Energy, Politecnico di Milano, Enrico Fermi Center for Nuclear Studies - CeSNEF, via Ponzio 34/3, 20133 Milano (Italy)

    2010-07-01

    This paper briefly presents a preliminary modelling approach, aimed at the extension of the TRANSURANUS code to the fuel rod performance analysis of Heavy Liquid Metal (HLM) cooled nuclear reactors, with specific reference to the employment of the T91 steel as cladding material and of the liquid Lead-Bismuth Eutectic (LBE) as coolant. On the basis of literature indications, correlations for heat transfer to LBE, corrosion behaviour and thermo-mechanical properties of T91 are proposed, and some open issues are discussed in prospect of more reliable fuel rod performance analysis of HLM-cooled nuclear reactors. (authors)

  18. Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992. Volume 3, Model parameters: Sandia WIPP Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-29

    This volume documents model parameters chosen as of July 1992 that were used by the Performance Assessment Department of Sandia National Laboratories in its 1992 preliminary performance assessment of the Waste Isolation Pilot Plant (WIPP). Ranges and distributions for about 300 modeling parameters in the current secondary data base are presented in tables for the geologic and engineered barriers, global materials (e.g., fluid properties), and agents that act upon the WIPP disposal system such as climate variability and human-intrusion boreholes. The 49 parameters sampled in the 1992 Preliminary Performance Assessment are given special emphasis with tables and graphics that provide insight and sources of data for each parameter.

  19. Predictive models applied to groundwater level forecasting: a preliminary experience on the alluvial aquifer of the Magra River (Italy).

    Science.gov (United States)

    Brozzo, Gianpiero; Doveri, Marco; Lelli, Matteo; Scozzari, Andrea

    2010-05-01

    the natural system can be partly explained in terms of its impulse response, identified as an arbitrary function, optimally fitted to the behavior observed in the past time series. In the proposed method, the approximation of the natural behavior of the system derives from the decomposition of the excitation signals (input parameters) into sequences of discrete values. Data fed to the ANN are thus pre-processed according to this concept. In the particular case study presented in this work, the proximity of the Magra River mixes the short-term effects of the hydraulic level of the river with the slower rainfall effects that diffusely feed the groundwater system, making the analysis even more challenging. In addition to piezometric levels, also continuous conductivity data series are available for the same period, and have been taken into account separately in this preliminary experience. The availability of the electrical conductivity parameter opens the way to the modeling of the different contributions to the groundwater reservoir, and may also enable the prediction of some water quality features, as discussed in this work. The preliminary analysis of meteorological and hydrologic data sets is discussed in this work, and goes through the following steps: a) description of the dataset, b) description of the model developed, c) model tuning, d) discussion of results and applicability as a predictor.

  20. Nursing opinion leadership: a preliminary model derived from philosophic theories of rational belief.

    Science.gov (United States)

    Anderson, Christine A; Whall, Ann L

    2013-10-01

    Opinion leaders are informal leaders who have the ability to influence others' decisions about adopting new products, practices or ideas. In the healthcare setting, the importance of translating new research evidence into practice has led to interest in understanding how opinion leaders could be used to speed this process. Despite continued interest, gaps in understanding opinion leadership remain. Agent-based models are computer models that have proven to be useful for representing dynamic and contextual phenomena such as opinion leadership. The purpose of this paper is to describe the work conducted in preparation for the development of an agent-based model of nursing opinion leadership. The aim of this phase of the model development project was to clarify basic assumptions about opinions, the individual attributes of opinion leaders and characteristics of the context in which they are effective. The process used to clarify these assumptions was the construction of a preliminary nursing opinion leader model, derived from philosophical theories about belief formation. © 2013 John Wiley & Sons Ltd.

  1. A central neuropathic pain model by DSP-4 induced lesion of noradrenergic neurons: preliminary report.

    Science.gov (United States)

    Kudo, Takashi; Kushikata, Tetsuya; Kudo, Mihoko; Kudo, Tsuyoshi; Hirota, Kazuyoshi

    2010-09-06

    Neuropathic pain models are classified as central and peripheral pain models. Although various peripheral neuropathic pain models are established, central pain models are based only on spinal cord injury. DSP-4 is a competitive inhibitor of norepinephrine uptake that selectively degenerates the locus coeruleus (LC)-noradrenergic neurons projection to the cerebral cortex and hippocampus. In the present study, we have tested whether lesion of LC-noradrenergic neurons by ip DSP-4 (0, 10, 30, 50 mg/kg, n=7 each) could provide a new central neuropathic pain model in rats using a hot-plate and tail-flick tests. DSP-4 significantly reduced the hot-plate latency and norepinephrine contents especially in the coerulean regions. However, DSP-4 did not change tail-flick latency. There are significant correlations of the latency in the hot-plate test with norepinephrine contents in the cerebral cortex (r=0.432, p=0.022), the hippocampus (r=0.465, p=0.013) and the pons (r=0.400, p=0.035) but not with those in the hypothalamus and the spinal cord. As response to hot-plate and tail-flick implies supra-spinal process and spinal reflex, respectively, central neuropathic pain may be facilitated by DSP-4 depleting LC-noradrenergic neurons although the present data are preliminary.

  2. The Geoengineering Model Intercomparison Project Phase 6 (GeoMIP6: simulation design and preliminary results

    Directory of Open Access Journals (Sweden)

    B. Kravitz

    2015-10-01

    Full Text Available We present a suite of new climate model experiment designs for the Geoengineering Model Intercomparison Project (GeoMIP. This set of experiments, named GeoMIP6 (to be consistent with the Coupled Model Intercomparison Project Phase 6, builds on the previous GeoMIP project simulations, and has been expanded to address several further important topics, including key uncertainties in extreme events, the use of geoengineering as part of a portfolio of responses to climate change, and the relatively new idea of cirrus cloud thinning to allow more longwave radiation to escape to space. We discuss experiment designs, as well as the rationale for those designs, showing preliminary results from individual models when available. We also introduce a new feature, called the GeoMIP Testbed, which provides a platform for simulations that will be performed with a few models and subsequently assessed to determine whether the proposed experiment designs will be adopted as core (Tier 1 GeoMIP experiments. This is meant to encourage various stakeholders to propose new targeted experiments that address their key open science questions, with the goal of making GeoMIP more relevant to a broader set of communities.

  3. The Geoengineering Model Intercomparison Project Phase 6 (GeoMIP6): simulation design and preliminary results

    Science.gov (United States)

    Kravitz, B.; Robock, A.; Tilmes, S.; Boucher, O.; English, J. M.; Irvine, P. J.; Jones, A.; Lawrence, M. G.; MacCracken, M.; Muri, H.; Moore, J. C.; Niemeier, U.; Phipps, S. J.; Sillmann, J.; Storelvmo, T.; Wang, H.; Watanabe, S.

    2015-10-01

    We present a suite of new climate model experiment designs for the Geoengineering Model Intercomparison Project (GeoMIP). This set of experiments, named GeoMIP6 (to be consistent with the Coupled Model Intercomparison Project Phase 6), builds on the previous GeoMIP project simulations, and has been expanded to address several further important topics, including key uncertainties in extreme events, the use of geoengineering as part of a portfolio of responses to climate change, and the relatively new idea of cirrus cloud thinning to allow more longwave radiation to escape to space. We discuss experiment designs, as well as the rationale for those designs, showing preliminary results from individual models when available. We also introduce a new feature, called the GeoMIP Testbed, which provides a platform for simulations that will be performed with a few models and subsequently assessed to determine whether the proposed experiment designs will be adopted as core (Tier 1) GeoMIP experiments. This is meant to encourage various stakeholders to propose new targeted experiments that address their key open science questions, with the goal of making GeoMIP more relevant to a broader set of communities.

  4. Preliminary Study on Kano Model in the Conceptual Design Activities for Product Lifecycle Improvement

    Science.gov (United States)

    Fahrul Hassan, Mohd; Rahman, M. R. A.; Arifin, A. M. T.; Ismail, A. E.; Rasidi Ibrahim, M.; Zulafif Rahim, M.; Fauzi Ahmad, Md

    2017-08-01

    Product manufactured with short life cycle had only one major issue, it can lead to increasing volume of waste. Day by day, this untreated waste had consumed many landfill spaces, waiting for any possible alternatives. Lack of product recovery knowledge and recyclability features imprinted into product design are one of the main reason behind all this. Sustainable awareness aspect should not just be implied into people’s mind, but also onto product design. This paper presents a preliminary study on Kano model method in the conceptual design activities to improve product lifecycle. Kano model is a survey-type method, used to analyze and distinguished product qualities or features, also how the customers may have perceived them. Three important attributes of Kano model are performance, attractive and must-be. The proposed approach enables better understanding of customer requirements while providing a way for Kano model to be integrated into engineering design to improve product’s end-of-life. Further works will be continued to provide a better lifecycle option (increase percentage of reuse, remanufacture or recycle, whereby decrease percentage of waste) of a product using Kano model approach.

  5. Preliminary Analysis on the Relative Solution Space Sizes for MTSP with Genetic Algorithm

    Science.gov (United States)

    Hao, Junling

    It is well known that the chromosome design is pivotal to solve the multiple traveling salesman problems with genetic algorithm. A well-designed chromosome coding can eliminate or reduce the redundant solutions. One chromosome and two chromosome design methods and a recently proposed two-part chromosome design are firstly introduced in this paper. Then the preliminary quantitative comparison analysis of the solution spaces of three different chromosome design methods is presented when the number of cities is linear with the travelers. The concept of relative solution space is proposed in order to compare the relative size of the solution spaces. The solution space of two-part chromosome design is much smaller than those of the traditional chromosome design. The result given in this paper provides a good guideline for the possible algorithmic design and engineering applications.

  6. Crystallization and preliminary X-ray analysis of alginate importer from Sphingomonas sp. A1.

    Science.gov (United States)

    Maruyama, Yukie; Itoh, Takafumi; Nishitani, Yu; Mikami, Bunzo; Hashimoto, Wataru; Murata, Kousaku

    2012-03-01

    Sphingomonas sp. A1 directly incorporates alginate polysaccharides through a 'superchannel' comprising a pit on the cell surface, alginate-binding proteins in the periplasm and an ABC transporter (alginate importer) in the inner membrane. Alginate importer, consisting of four subunits, AlgM1, AlgM2 and two molecules of AlgS, was crystallized in the presence of the binding protein AlgQ2. Preliminary X-ray analysis showed that the crystal diffracted to 3.3 Å resolution and belonged to space group P2(1)2(1)2(1), with unit-cell parameters a = 72.5, b = 136.8, c = 273.3 Å, suggesting the presence of one complex in the asymmetric unit.

  7. ANSI/ASHRAE/IES Standard 90.1-2013 Preliminary Determination: Qualitative Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, Mark A.; Hart, Reid; Athalye, Rahul A.; Rosenberg, Michael I.; Richman, Eric E.; Winiarski, David W.

    2014-03-01

    Section 304(b) of the Energy Conservation and Production Act (ECPA), as amended, requires the Secretary of Energy to make a determination each time a revised version of ASHRAE Standard 90.1 is published with respect to whether the revised standard would improve energy efficiency in commercial buildings. When the U.S. Department of Energy (DOE) issues an affirmative determination on Standard 90.1, states are statutorily required to certify within two years that they have reviewed and updated the commercial provisions of their building energy code, with respect to energy efficiency, to meet or exceed the revised standard. This report provides a preliminary qualitative analysis of all addenda to ANSI/ASHRAE/IES Standard 90.1-2010 (referred to as Standard 90.1-2010 or 2010 edition) that were included in ANSI/ASHRAE/IES Standard 90.1-2013 (referred to as Standard 90.1-2013 or 2013 edition).

  8. Crystallization and preliminary X-ray analysis of Rv1674c from Mycobacterium tuberculosis

    Science.gov (United States)

    Li, Jincheng; Wang, Xudong; Gong, Weimin; Niu, Chunyan; Zhang, Min

    2015-01-01

    Adaptations to hypoxia play an important role in Mycobacterium tuberculosis pathogenesis. Rv0324, which contains an HTH DNA-binding domain and a rhodanese domain, is one of the key transcription regulators in response to hypoxia. M. tuberculosis Rv1674c is a homologue of Rv0324. To understand the interdomain interaction and regulation of the HTH domain and the rhodanese domain, recombinant Rv1674c protein was purified and crystallized by the vapour-diffusion method. The crystals diffracted to 2.25 Å resolution. Preliminary diffraction analysis suggests that the crystals belonged to space group P3121 or P3221, with unit-cell parameters a = b = 67.8, c = 174.5 Å, α = β = 90, γ = 120°. The Matthews coefficient was calculated to be 2.44 Å3 Da−1, assuming that the crystallographic asymmetric unit contains two protein molecules. PMID:25760714

  9. Preliminary phytochemical analysis, antibacterial, antifungal and anticandidal activities of successive extracts of Crossandra infundibuliformis

    Institute of Scientific and Technical Information of China (English)

    MadhumithaG; SaralAM

    2011-01-01

    Objective:To investigate the phytochemical, antibacterial, antifungal and anticandidal activity of successive extracts of Crossandra infundibuliformis (Acanthaceae) leaves. Methods:Preliminary screening on the presence of alkaloids, saponins, phytosterols, phenolic compounds, flavanoids, tannins, carbohydrates, terpenoids, oils and fats were carried out by phytochemical analysis. The antibacterial, antifungal and anticandidal activities were done by agar well diffusion technique. Results:The successive extracts have an array of chemical constituents and the MIC values of antibacterial activity ranges from 0.007 8 to 0.015 0μg/mL. In case of antifungal and anticandidal activities the MIC values were between 0.125 and 0.250μg/mL. Conclusions:These findings demonstrate that the leaf extracts of C. infundibuliformis presents excellent antimicrobial activities and thus have great potential as a source for natural health care products.

  10. Preliminary C3 Loading Analysis for Future High-Altitude Unmanned Aircraft in the NAS

    Science.gov (United States)

    Ho, Yan-Shek; Gheorghisor, Izabela; Box, Frank

    2006-01-01

    This document provides a preliminary assessment and summary of the command, control, and communications (C(sup 3)) loading requirements of a generic future high-altitude, long-endurance unmanned aircraft (UA) operating at in the National Airspace System. Two principal types of C(sup 3) traffic are considered in our analysis: communications links providing air traffic services (ATS) to the UA and its human pilot, and the command and control data links enabling the pilot to operate the UA remotely. we have quantified the loading requirements of both types of traffic for two different assumed levels of UA autonomy. Our results indicate that the potential use of UA-borne relays for the ATS links, and the degree of autonomy exercised by the UA during the departure and arrival phases of its flight, will be among the key drivers of C(sup 3) loading and bandwidth requirements.

  11. Visual Assessment on Coastal Cruise Tourism: A Preliminary Planning Using Importance Performance Analysis

    Science.gov (United States)

    Trisutomo, S.

    2017-07-01

    Importance-Performance Analysis (IPA) has been widely applied in many cases. In this research, IPA was applied to measure perceive on coastal tourism objects and its possibility to be developed as coastal cruise tourism in Makassar. Three objects, i.e. Akkarena recreational site, Losari public space at waterfront, and Paotere traditional Phinisi ships port, were selected and assessed visually from water area by a group of purposive resource persons. The importance and performance of 10 attributes of each site were scored using Likert scale from 1 to 5. Data were processed by SPSS-21 than resulted Cartesian graph which the scores were divided in four quadrants: Quadrant I concentric here, Quadrant II keep up the good work, Quadrant III low priority, and Quadrant IV possible overkill. The attributes in each quadrant could be considered as the platform for preliminary planning of coastal cruise tour in Makassar

  12. Preliminary control system design and analysis for the Space Station Furnace Facility thermal control system

    Science.gov (United States)

    Jackson, M. E.

    1995-01-01

    This report presents the Space Station Furnace Facility (SSFF) thermal control system (TCS) preliminary control system design and analysis. The SSFF provides the necessary core systems to operate various materials processing furnaces. The TCS is defined as one of the core systems, and its function is to collect excess heat from furnaces and to provide precise cold temperature control of components and of certain furnace zones. Physical interconnection of parallel thermal control subsystems through a common pump implies the description of the TCS by coupled nonlinear differential equations in pressure and flow. This report formulates the system equations and develops the controllers that cause the interconnected subsystems to satisfy flow rate tracking requirements. Extensive digital simulation results are presented to show the flow rate tracking performance.

  13. Acanthamoeba polyphaga mimivirus NDK: preliminary crystallographic analysis of the first viral nucleoside diphosphate kinase.

    Science.gov (United States)

    Jeudy, Sandra; Coutard, Bruno; Lebrun, Régine; Abergel, Chantal

    2005-06-01

    The complete sequence of the largest known double-stranded DNA virus, Acanthamoeba polyphaga mimivirus, has recently been determined [Raoult et al. (2004), Science, 306, 1344-1350] and revealed numerous genes not expected to be found in a virus. A comprehensive structural and functional study of these gene products was initiated [Abergel et al. (2005), Acta Cryst. F61, 212-215] both to better understand their role in the virus physiology and to obtain some clues to the origin of DNA viruses. Here, the preliminary crystallographic analysis of the viral nucleoside diphosphate kinase protein is reported. The crystal belongs to the cubic space group P2(1)3, with unit-cell parameter 99.425 A. The self-rotation function confirms that there are two monomers per asymmetric unit related by a twofold non-crystallographic axis and that the unit cell thus contains four biological entities.

  14. Preliminary analysis of habitat utilization by woodland caribou in northwestern Ontario using satellite telemetry

    Directory of Open Access Journals (Sweden)

    T.L. Hillis

    1998-03-01

    Full Text Available Locational data collected over a one year period from 10 female woodland caribou, Rangifer tarandus caribou, collared with Argos satellite collars in northwestern Ontario, Canada were superimposed on supervised Landsat images using Geographical Information System (GIS technology. Landscape parameters, land cover classifications, and drainage were utilized to create the basemap. Using ARCVIEW software, all digital fixes from collared caribou with information of date, time, and activity status were overlain on the basemap to facilitate a preliminary analysis of habitat use in this species. Results supported the conclusions (1 that woodland caribou in northwestern Ontario select habitats containing high to moderate conifer cover and avoided disturbed areas and shrub-rich habitats, (2 that seasonal changes in habitat utilization occurs in females of this species, and (3 that satellite telemetry technology can be employed in the boreal forest ecosystem to assess habitat utilization by large ungulate species.

  15. Crystallization and preliminary X-ray analysis of Leishmania major glyoxalase I

    Energy Technology Data Exchange (ETDEWEB)

    Ariza, Antonio; Vickers, Tim J.; Greig, Neil; Fairlamb, Alan H.; Bond, Charles S., E-mail: c.s.bond@dundee.ac.uk [Division of Biological Chemistry and Molecular Microbiology, Wellcome Trust Biocentre, School of Life Sciences, University of Dundee, Dundee DD1 5EH,Scotland (United Kingdom)

    2005-08-01

    The detoxification enzyme glyoxalase I from L. major has been crystallized. Preliminary molecular-replacement calculations indicate the presence of three glyoxalase I dimers in the asymmetric unit. Glyoxalase I (GLO1) is a putative drug target for trypanosomatids, which are pathogenic protozoa that include the causative agents of leishmaniasis. Significant sequence and functional differences between Leishmania major and human GLO1 suggest that it may make a suitable template for rational inhibitor design. L. major GLO1 was crystallized in two forms: the first is extremely disordered and does not diffract, while the second, an orthorhombic form, produces diffraction to 2.0 Å. Molecular-replacement calculations indicate that there are three GLO1 dimers in the asymmetric unit, which take up a helical arrangement with their molecular dyads arranged approximately perpendicular to the c axis. Further analysis of these data are under way.

  16. Preliminary risk analysis applied to the transmission of Creutzfeldt-Jakob disease.

    Science.gov (United States)

    Bertrand, E; Schlatter, J

    2011-01-01

    Transmissible spongiform encephalopathy (TSE) is a degenerative disease of the central nervous system. As yet, there is no human screening test and no effective treatment. This disease is invariably fatal. General preventive measures are therefore essential. The objective of this study is to analyze and address on a prioritized basis the risks relating to the transmission of Creutzfeldt-Jakob disease during surgical operations by means of a preliminary risk analysis (PRA). The PRA produces 63 scenarios with maximum risk relating to operational and legal dangers. The study recommends a number of courses of action, such as training and internal controls, in order to reduce the risks identified. A procedure has been drawn up and assessed for each action. This PRA makes it possible to target and significantly reduce the potential dangers for transmission of Creutzfeldt-Jakob disease through the use of medical instruments.

  17. Purification, crystallization and preliminary X-ray analysis of uridine phosphorylase from Salmonella typhimurium.

    Science.gov (United States)

    Dontsova, Mariya V; Savochkina, Yulia A; Gabdoulkhakov, Azat G; Baidakov, Sergey N; Lyashenko, Andrey V; Zolotukhina, Maria; Errais Lopes, Liubov; Garber, Mariya B; Morgunova, Ekaterina Yu; Nikonov, Stanislav V; Mironov, Alexandr S; Ealick, Steven E; Mikhailov, Al 'Bert M

    2004-04-01

    The structural udp gene encoding uridine phosphorylase (UPh) was cloned from the Salmonella typhimurium chromosome and overexpressed in Escherichia coli cells. S. typhimurium UPh (StUPh) was purified to apparent homogeneity and crystallized. The primary structure of StUPh has high homology to the UPh from E. coli, but the enzymes differ substantially in substrate specificity and sensitivity to the polarity of the medium. Single crystals of StUPh were grown using hanging-drop vapor diffusion with PEG 8000 as the precipitant. X-ray diffraction data were collected to 2.9 A resolution. Preliminary analysis of the diffraction data indicated that the crystal belonged to space group P6(1(5)), with unit-cell parameters a = 92.3, c = 267.5 A. The solvent content is 37.7% assuming the presence of one StUPh hexamer per asymmetric unit.

  18. Crystallization and preliminary X-ray diffraction analysis of West Nile virus

    Energy Technology Data Exchange (ETDEWEB)

    Kaufmann, Barbel; Plevka, Pavel; Kuhn, Richard J.; Rossmann, Michael G. (Purdue)

    2010-05-25

    West Nile virus, a human pathogen, is closely related to other medically important flaviviruses of global impact such as dengue virus. The infectious virus was purified from cell culture using polyethylene glycol (PEG) precipitation and density-gradient centrifugation. Thin amorphously shaped crystals of the lipid-enveloped virus were grown in quartz capillaries equilibrated by vapor diffusion. Crystal diffraction extended at best to a resolution of about 25 {angstrom} using synchrotron radiation. A preliminary analysis of the diffraction images indicated that the crystals had unit-cell parameters a {approx_equal} b {approx_equal} 480 {angstrom}, {gamma} = 120{sup o}, suggesting a tight hexagonal packing of one virus particle per unit cell.

  19. Preliminary performance analysis of the advanced pulse compression noise radar waveform

    Science.gov (United States)

    Govoni, Mark A.; Moyer, Lee R.

    2012-06-01

    Noise radar systems encounter target fluctuation behavior similar to that of conventional systems. For noise radar systems, however, the fluctuations are not only dictated by target composition and geometry, but also by the non-uniform power envelope of their random transmit signals. This third dependency is of interest and serves as the basis for the preliminary analysis conducted in this manuscript. General conclusions are drawn on the implications of having a random power envelope and the impacts it could have on both the transmit and receive processes. Using an advanced pulse compression noise (APCN) radar waveform as the constituent signal, a computer simulation aids in quantifying potential losses and the impacts they might have on the detection performance of a real radar system.

  20. Does PGE₁ vasodilator prevent orthopaedic implant-related infection in diabetes? Preliminary results in a mouse model.

    Directory of Open Access Journals (Sweden)

    Arianna B Lovati

    Full Text Available BACKGROUND: Implant-related infections are characterized by bacterial colonization and biofilm formation on the prosthesis. Diabetes represents one of the risk factors that increase the chances of prosthetic infections because of related severe peripheral vascular disease. Vasodilatation can be a therapeutic option to overcome diabetic vascular damages and increase the local blood supply. In this study, the effect of a PGE₁ vasodilator on the incidence of surgical infections in diabetic mice was investigated. METHODOLOGY: A S. aureus implant-related infection was induced in femurs of diabetic mice, then differently treated with a third generation cephalosporin alone or associated with a PGE₁ vasodilator. Variations in mouse body weight were evaluated as index of animal welfare. The femurs were harvested after 28 days and underwent both qualitative and quantitative analysis as micro-CT, histological and microbiological analyses. RESULTS: The analysis performed in this study demonstrated the increased host response to implant-related infection in diabetic mice treated with the combination of a PGE₁ and antibiotic. In this group, restrained signs of infections were identified by micro-CT and histological analysis. On the other hand, the diabetic mice treated with the antibiotic alone showed a severe infection and inability to successfully respond to the standard antimicrobial treatment. CONCLUSIONS: The present study revealed interesting preliminary results in the use of a drug combination of antibiotic and vasodilator to prevent implant-related Staphylococcus aureus infections in a diabetic mouse model.

  1. A Combination of Preliminary Electroweak Measurements and Constraints on the Standard Model

    Energy Technology Data Exchange (ETDEWEB)

    Su, Dong

    2003-05-15

    This note presents a combination of published and preliminary electroweak results from the four LEP collaborations and the SLD collaboration which were prepared for the 1997 summer conferences. Averages are derived for hadronic and leptonic cross-sections, the leptonic forward-backward asymmetries, the {tau} polarisation asymmetries, the b{bar b} and c{bar c} partial widths and forward-backward asymmetries and the q{bar q} charge asymmetry. The major changes with respect to results presented last year are updated results of A{sub LR} from SLD, and the inclusion of the first direct measurements of the W mass and triple-gauge-boson couplings performed at LEP. The results are compared with precise electroweak measurements from other experiments. The parameters of the Standard Model are evaluated, first using the combined LEP electroweak measurements, and then using the full set of electroweak results.

  2. Cost-based optimization of a nuclear reactor core design: a preliminary model

    Energy Technology Data Exchange (ETDEWEB)

    Sacco, Wagner F.; Alves Filho, Hermes [Universidade do Estado do Rio de Janeiro (UERJ), Nova Friburgo, RJ (Brazil). Inst. Politecnico. Dept. de Modelagem Computacional]. E-mails: wfsacco@iprj.uerj.br; halves@iprj.uerj.br; Pereira, Claudio M.N.A. [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil). Div. de Reatores]. E-mail: cmnap@ien.gov.br

    2007-07-01

    A new formulation of a nuclear core design optimization problem is introduced in this article. Originally, the optimization problem consisted in adjusting several reactor cell parameters, such as dimensions, enrichment and materials, in order to minimize the radial power peaking factor in a three-enrichment zone reactor, considering restrictions on the average thermal flux, criticality and sub-moderation. Here, we address the same problem using the minimization of the fuel and cladding materials costs as the objective function, and the radial power peaking factor as an operational constraint. This cost-based optimization problem is attacked by two metaheuristics, the standard genetic algorithm (SGA), and a recently introduced Metropolis algorithm called the Particle Collision Algorithm (PCA). The two algorithms are submitted to the same computational effort and their results are compared. As the formulation presented is preliminary, more elaborate models are also discussed (author)

  3. A Combination of Preliminary Electroweak Measurements and Constraints on the Standard Model, 2000

    CERN Document Server

    CERN. Geneva

    2000-01-01

    This note presents a combination of published and preliminary electroweak results from the four LEP collaborations and the SLD collaboration which were prepared for the 1999 summer conferences. Averages are derived for hadronic and leptonic cross sections, the leptonic forward-backward asymmetries, the $\\tau$ polarisation asymmetries, the $\\bb$ and $\\cc$ partial widths and forward-backward asymmetries and the $\\qq$ charge asymmetry. The major changes with respect to results presented in summer 1998 are updates to the lineshape, W mass and triple-gauge-boson couplings from LEP, and $\\cAb$ and $\\cAc$ from SLD. The results are compared with precise electroweak measurements from other experiments. A significant update here are new W mass measurements from CDF and D\\O. The parameters of the Standard Model are evaluated, first using the combined LEP electroweak measurements, and then using the full set of electroweak results.

  4. Preliminary Analysis of Aircraft Loss of Control Accidents: Worst Case Precursor Combinations and Temporal Sequencing

    Science.gov (United States)

    Belcastro, Christine M.; Groff, Loren; Newman, Richard L.; Foster, John V.; Crider, Dennis H.; Klyde, David H.; Huston, A. McCall

    2014-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes, and can result from a wide spectrum of hazards, often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and their validation must provide a means of assessing system effectiveness and coverage of these hazards. This requires the definition of a comprehensive set of LOC test scenarios based on accident and incident data as well as future risks. This paper defines a comprehensive set of accidents and incidents over a recent 15 year period, and presents preliminary analysis results to identify worst-case combinations of causal and contributing factors (i.e., accident precursors) and how they sequence in time. Such analyses can provide insight in developing effective solutions for LOC, and form the basis for developing test scenarios that can be used in evaluating them. Preliminary findings based on the results of this paper indicate that system failures or malfunctions, crew actions or inactions, vehicle impairment conditions, and vehicle upsets contributed the most to accidents and fatalities, followed by inclement weather or atmospheric disturbances and poor visibility. Follow-on research will include finalizing the analysis through a team consensus process, defining future risks, and developing a comprehensive set of test scenarios with correlation to the accidents, incidents, and future risks. Since enhanced engineering simulations are required for batch and piloted evaluations under realistic LOC precursor conditions, these test scenarios can also serve as a high-level requirement for defining the engineering simulation enhancements needed for generating them.

  5. Tsunami hazard assessment at Port Alberni, BC, Canada: preliminary model results

    Science.gov (United States)

    Grilli, S. T.; Insua, T. L.; Grilli, A. R.; Douglas, K. L.; Shelby, M. R.; Wang, K.; Gao, D.

    2016-12-01

    Located in the heart of Vancouver Island, BC, Port Alberni has a well-known history of tsunamis. Many of the Nuu-Chah-Nulth First Nations share oral stories about a strong fight between a thunderbird and a whale that caused big waves in a winter night, a story that is compatible with the recently recognized great Cascadia tsunami in January, 1700. Port Alberni, with a total population of approximately 20,000 people, lies beside the Somass River, at the very end of Barkley Sound Inlet. The narrow canal connecting this town to the Pacific Ocean runs for more than 64 km ( 40 miles) between steep mountains, providing an ideal setting for the amplification of tsunami waves through funnelling effects. The devastating effects of tsunamis are still fresh in residents' memories from the impact of the 1964 Alaska tsunami that caused serious damage to the city. In June 2016, Emergency Management BC ran a coastal exercise in Port Alberni, simulating the response to an earthquake and a tsunami. During three days, the emergency teams in the City of Port Alberni practiced and learned from the experience. Ocean Networks Canada contributed to this exercise with the development of preliminary simulations of tsunami impact on the city from a buried rupture of the Cascadia Subduction Zone, including the Explorer segment. Wave propagation was simulated with the long-wave model FUNWAVE-TVD. Preliminary results indicate a strong amplification of tsunami waves in the Port Alberni area. The inundation zone in Port Alberni had a footprint similar to that of the 1700 Cascadia and 1964 Alaska tsunamis, inundating the area surrounding the Somass river and preferentially following the Kitsuksis and Roger Creek river margins into the city. Several other tsunami source scenarios, including splay faulting and trench-breaching ruptures are currently being modeled for the city of Port Alberni following a similar approach. These results will be presented at the conference.

  6. Investigating feedback mechanisms between stress and grain-size: preliminary findings from finite-element modelling

    Science.gov (United States)

    Cross, A. J.; Prior, D. J.; Ellis, S. M.

    2012-12-01

    It is widely accepted that changes in stress and grain size can induce a switch between grain-size insensitive (GSI) and sensitive (GSS) creep mechanisms. Under steady-state conditions, grains evolve to an equilibrium size in the boundary region between GSS and GSI, described by the paleopiezometer for a given material. Under these conditions, significant rheological weakening is not expected, as grain size reduction processes are balanced by grain growth processes. However, it has been shown that the stress field surrounding faults varies through the seismic cycle, with both rapid loading and unloading of stress possible in the co- and post-seismic stages. We propose that these changes in stress in the region of the brittle-ductile transition zone may be sufficient to force a deviation from the GSI-GSS boundary and thereby cause a change in grain size and creep mechanism prior to system re-equilibration. Here we present preliminary findings from numerical modelling of stress and grain size changes in response to loading of mechanical inhomogeneities. Our results are attained using a grain-size evolution (GSE) subroutine incorporated into the SULEC finite-element code developed by Susan Ellis and Susanne Buiter, which utilises an iterative approach of solving for spatial and temporal changes in differential stress, grain size and active creep mechanism. Preliminary models demonstrate that stress changes in response to the opening of a fracture in a flowing medium can be significant enough to cause a switch from GSI to GSS creep. These results are significant in the context of understanding spatial variations and feedback between stress, grain size and deformation mechanisms through the seismic cycle.

  7. Fish-Friendly Hydropower Turbine Development & Deployment: Alden Turbine Preliminary Engineering and Model Testing

    Energy Technology Data Exchange (ETDEWEB)

    Foust, J. [Voith Hydro, Inc., York, PA (USA); Hecker, G. [Alden Research Laboratory, Inc., Holden, MA (USA); Li, S. [Alden Research Laboratory, Inc., Holden, MA (USA); Allen, G. [Alden Research Laboratory, Inc., Holden, MA (USA)

    2011-10-01

    The Alden turbine was developed through the U.S. Department of Energy's (DOE's) former Advanced Hydro Turbine Systems Program (1994-2006) and, more recently, through the Electric Power Research Institute (EPRI) and the DOE's Wind & Water Power Program. The primary goal of the engineering study described here was to provide a commercially competitive turbine design that would yield fish passage survival rates comparable to or better than the survival rates of bypassing or spilling flow. Although the turbine design was performed for site conditions corresponding to 92 ft (28 m) net head and a discharge of 1500 cfs (42.5 cms), the design can be modified for additional sites with differing operating conditions. During the turbine development, design modifications were identified for the spiral case, distributor (stay vanes and wicket gates), runner, and draft tube to improve turbine performance while maintaining features for high fish passage survival. Computational results for pressure change rates and shear within the runner passage were similar in the original and final turbine geometries, while predicted minimum pressures were higher for the final turbine. The final turbine geometry and resulting flow environments are expected to further enhance the fish passage characteristics of the turbine. Computational results for the final design were shown to improve turbine efficiencies by over 6% at the selected operating condition when compared to the original concept. Prior to the release of the hydraulic components for model fabrication, finite element analysis calculations were conducted for the stay vanes, wicket gates, and runner to verify that structural design criteria for stress and deflections were met. A physical model of the turbine was manufactured and tested with data collected for power and efficiency, cavitation limits, runaway speed, axial and radial thrust, pressure pulsations, and wicket gate torque. All parameters were observed to fall

  8. Preliminary Safety Analysis Report for the Transuranic Storage Area Retrieval Enclosure at the Idaho National Engineering Laboratory. Revision 8

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This Transuranic Storage Area Retrieval Enclosure Preliminary Safety Analysis Report was completed as required by DOE Order 5480.23. The purpose of this document is to construct a safety basis that supports the design and permits construction of the facility. The facility has been designed to the requirements of a Radioactive Solid Waste Facility presented in DOE Order 6430.1A.

  9. Yucca Mountain transportation routes: Preliminary characterization and risk analysis; Volume 2, Figures [and] Volume 3, Technical Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Souleyrette, R.R. II; Sathisan, S.K.; di Bartolo, R. [Nevada Univ., Las Vegas, NV (United States). Transportation Research Center

    1991-05-31

    This report presents appendices related to the preliminary assessment and risk analysis for high-level radioactive waste transportation routes to the proposed Yucca Mountain Project repository. Information includes data on population density, traffic volume, ecologically sensitive areas, and accident history.

  10. Yucca Mountain transportation routes: Preliminary characterization and risk analysis; Volume 2, Figures [and] Volume 3, Technical Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Souleyrette, R.R. II; Sathisan, S.K.; di Bartolo, R. [Nevada Univ., Las Vegas, NV (United States). Transportation Research Center

    1991-05-31

    This report presents appendices related to the preliminary assessment and risk analysis for high-level radioactive waste transportation routes to the proposed Yucca Mountain Project repository. Information includes data on population density, traffic volume, ecologically sensitive areas, and accident history.

  11. Waste Feed Delivery System Phase 1 Preliminary Reliability and Availability and Maintainability Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    CARLSON, A.B.

    1999-11-11

    The document presents updated results of the preliminary reliability, availability, maintainability analysis performed for delivery of waste feed from tanks 241-AZ-101 and 241-AN-105 to British Nuclear Fuels Limited, inc. under the Tank Waste Remediation System Privatization Contract. The operational schedule delay risk is estimated and contributing factors are discussed.

  12. A preliminary assessment of using a white light confocal imaging profiler for cut mark analysis.

    Science.gov (United States)

    Schmidt, Christopher W; Moore, Christopher R; Leifheit, Randell

    2012-01-01

    White light confocal microscopy creates detailed 3D representations of microsurfaces that can be qualitatively and quantitatively analyzed. The study describes its application to the analysis of cut marks on bone, particularly when discerning cuts made by steel tools from those made by stone. The process described comes from a study where cuts were manually made on a cow rib with seven cutting tools, four stone (an unmodified chert flake, a chert biface, a bifacially ground slate fragment, and an unsharpened piece of slate), and three steel (a Swiss Army Knife, a serrate steak knife, and a serrate saw). Kerfs were magnified ×20 and 3D data clouds were generated using a Sensofar(®) White Light Confocal Profiler (WLCP). Kerf profiles and surface areas, volumes, mean depths, and maximum depths were calculated with proprietary software (SensoScan(®) and SolarMap(®)). For the most part, the stone tools make shallower and wider cuts. Kerf floors can be studied at higher magnifications; they were viewed at ×100. When comparing the kerf floors of the unsharpened slate and the serrate steak knife it was found that the slate floor was more uneven, but the serrate steak knife generated more overall relief. Although preliminary, the approach described here successfully distinguishes stone and steel tools; the authors conclude that the WLCP is a promising technology for cut mark analysis because of the very detailed 3D representations it creates and the numerous avenues of analysis it provides.

  13. Atmospheric Modelling for Neptune's Methane D/H Ratio - Preliminary Results

    CERN Document Server

    Cotton, Daniel V; Bott, Kimberly; Bailey, Jeremy

    2015-01-01

    The ratio of deuterium to hydrogen (D/H ratio) of Solar System bodies is an important clue to their formation histories. Here we fit a Neptunian atmospheric model to Gemini Near Infrared Spectrograph (GNIRS) high spectral resolution observations and determine the D/H ratio in methane absorption in the infrared H-band ($\\sim$ 1.6 {\\mu}m). The model was derived using our radiative transfer software VSTAR (Versatile Software for the Transfer of Atmospheric Radiation) and atmospheric fitting software ATMOF (ATMOspheric Fitting). The methane line list used for this work has only become available in the last few years, enabling a refinement of earlier estimates. We identify a bright region on the planetary disc and find it to correspond to an optically thick lower cloud. Our preliminary determination of CH$_{\\rm 3}$D/CH$_{\\rm 4}$ is 3.0$\\times10^{-4}$, which is in line with the recent determination of Irwin et al. (2014) of 3.0$^{+1.0}_{-0.9}\\sim\\times10^{-4}$, made using the same model parameters and line list but...

  14. Preliminary study on assessment of nutrient transport in the Taihu Basin based on SWAT modeling

    Institute of Scientific and Technical Information of China (English)

    LAI; Geying; YU; Ge; GUI; Feng

    2006-01-01

    With the Taihu Basin as a study area, using the spatially distributed and mechanism-based SWAT model, preliminary simulations of nutrient transport in the Taihu Basin during the period of 1995~2002 has been carried out. The topography, soil, meteorology and land use with industrial point pollution discharge, the loss of agricultural fertilizers, urban sewerage, and livestock drainages were all considered in the boundary conditions of the simulations. The model was calibrated and validated against water quality monitoring data from 2001 to 2002. The results show that the annual total productions of nitrogen (TN) and phosphorus (TP) into Lake Taihu are 40000t and 2000t respectively. Nutrient from the Huxi Region is a major resource for Lake Taihu. The non-point source (surface source) pollution is the main form of catchment sources of nutrients into Lake Taihu,occupied TN 53% and TP 56% respectively. TN and TP nutrients from industrial point pollution discharge are 30% and 16%, and sewerage in both forms of point source and non-point source are TN 31% and TP 47%. Both the loss of agricultural fertilizers and livestock drainages from the catchment should be paid more attention as an important nutrient source. The results also show that SWAT is an effective model for the simulation of temporally and spatially nutrient changes and for the assessment of the trends in a catchment scale.

  15. The development of a canine anorectal autotransplantation model based on blood supply: a preliminary case report.

    Directory of Open Access Journals (Sweden)

    Jun Araki

    Full Text Available Colostomy is conventionally the only treatment for anal dysfunction. Recently, a few trials of anorectal transplantation in animals have been published; however, further development of this technique is required. Moreover, it is crucial to perform this research in dogs, which resemble humans in anorectal anatomy and biology. We designed a canine anorectal transplantation model, wherein anorectal autotransplantation was performed by anastomoses of the rectum, inferior mesenteric artery (IMA and vein, and pudendal nerves. Resting pressure in the anal canal and anal canal pressure fluctuation were measured before and after surgery. Graft pathology was examined three days after surgery. The anal blood supply was compared with that in three beagles using indocyanine green (ICG fluorescence angiography. The anorectal graft had sufficient arterial blood supply from the IMA; however, the graft's distal end was congested and necrotized. Functional examination demonstrated reduced resting pressure and the appearance of an irregular anal canal pressure wave after surgery. ICG angiography showed that the pudendal arteries provided more blood flow than the IMA to the anal segment. This is the first canine model of preliminary anorectal autotransplantation, and it demonstrates the possibility of establishing a transplantation model in dogs using appropriate vascular anastomoses, thus contributing to the progress of anorectal transplantation.

  16. Preliminary thermal/structural analysis of a carbon-carbon/refractory-metal heat-pipe-cooled wing leading edge

    Science.gov (United States)

    Glass, David E.; Camarda, Charles J.

    1990-01-01

    This study presents preliminary thermal/structural analyses of a carbon-carbon/refractory-metal heat-pipe-cooled wing leading edge concept designed for an air breathing single-stage-to-orbit hypersonic vehicle. The concept features chordwise (i.e., normal to the leading edge) and spanwise (i.e., parallel to the leading edge) refractory-metal heat pipes which are completely embedded within a carbon-carbon primary structure. Studies of the leading edge were performed using nonlinear thermal and linear structural three-dimensional finite element analyses. The concept was shown to be thermally feasible within the limits of the assumptions made in the analyses when internal radiative cooling is present during ascent, and a three-dimensional carbon-carbon architecture is used. In addition, internal radiative cooling was found not to be necessary during descent. The linear stress analysis indicated excessively large thermal stresses in the rafractory metal walls of the heat pipes even though a soft layer of carbon was included between the heat pipe and the carbon-carbon structure in an attempt to reduce the thermal stresses. A nonlinear structural analysis may be necessary to properly model the response of the refractory-metal heat pipes.

  17. An analysis of complex multiple-choice science-technology-society items: Methodological development and preliminary results

    Science.gov (United States)

    Vázquez-Alonso, Ángel; Manassero-Mas, María-Antonia; Acevedo-Díaz, José-Antonio

    2006-07-01

    The scarce attention to the assessment and evaluation in science education research has been especially harmful for teaching science-technology-society (STS) issues, due to the dialectical, tentative, value-laden, and polemic nature of most STS topics. This paper tackles the methodological difficulties of the instruments that monitor views related to STS topics and rationalizes a quantitative methodology and an analysis technique to improve the utility of an empirically developed multiple-choice item pool, the Questionnaire of Opinions on STS. This methodology embraces an item-scaling psychometrics based on the judgments by a panel of experts, a multiple response model, a scoring system, and the data analysis. The methodology finally produces normalized attitudinal indices that represent the respondent's reasoned beliefs toward STS statements, the respondent's position on an item that comprises several statements, or the respondent's position on an entire STS topic that encompasses a set of items. Some preliminary results show the methodology's ability to evaluate the STS attitudes in a qualitative and quantitative way and for statistical hypothesis testing. Lastly, some applications for teacher training and STS curriculum development in science classrooms are discussed.

  18. Utilizing the ECHO Model in the Veterans Health Affairs System: Guidelines for Setup, Operations and Preliminary Findings

    Directory of Open Access Journals (Sweden)

    Herschel Knapp

    2015-06-01

    Full Text Available Background: In 2011, the Veterans Health Administration (VHA consulted with the Project ECHO (Extension for Community Healthcare Outcomes team at the University of New Mexico, Albuquerque, to reproduce their successful model within the VHA. Methods: The VHA launched SCAN-ECHO (Specialty Care Access Network-Extension for Community Healthcare Outcomes, a multisite videoconferencing system to conduct live clinical consultations between specialists at a VHA Medical Center (hospital and primary care providers stationed at satellite VHA CBOCs (Community-Based Outpatient Clinic. Results: Analysis of the first three years rendered a mean attendee satisfaction of 89.53% and a consultation satisfaction score of 88.10%. About half of the SCAN-ECHO consultations resulted in patients receiving their treatment from their local primary care providers; the remaining half were referred to the VHA Medical Center when the treatment involved equipment or services not available at the CBOCs (e.g., MRI, surgery. Conclusion: This paper details the setup, operation logistics and preliminary findings, suggesting that SCAN-ECHO is a viable model for providing quality specialty clinical consultation service, prompter access to care, reduced commutes and continuing education. Additionally, the use of a secured Internet-based videoconferencing system that supports connectivity to multiple (mobile devices could expand the utilization of this service.

  19. Analysis of Business Models

    Directory of Open Access Journals (Sweden)

    Slavik Stefan

    2014-12-01

    Full Text Available The term business model has been used in practice for few years, but companies create, define and innovate their models subconsciously from the start of business. Our paper is aimed to clear the theory about business model, hence definition and all the components that form each business. In the second part, we create an analytical tool and analyze the real business models in Slovakia and define the characteristics of each part of business model, i.e., customers, distribution, value, resources, activities, cost and revenue. In the last part of our paper, we discuss the most used characteristics, extremes, discrepancies and the most important facts which were detected in our research.

  20. Approach of fuzzy logic in the preliminary risk analysis of the upstream and downstream lines of an offshore petroleum production unit

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Claudio B. [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil); Pinho, Edson [Universidade Federal Rural do Rio de Janeiro (UFRRJ), Seropedica, RJ (Brazil); Maia Neto, Luiz

    2009-07-01

    This work consists of the application of a model of qualitative risk assessment based in fuzzy logic for the judgment of criticality of the scenarios of accident identified through the technique of preliminary hazard analysis in the upstream and downstream of an offshore oil production unit already in operation. The model based on fuzzy logic acts as substitute to the traditional Risks Matrix that uses subjective concepts for the categories of expected severity and frequency of the accidents. The structure of the employed model consists of 7 input variables, an internal variable and an output variable, all linked in accordance with the modules of analysis for each type of accident. The developed base of knowledge, that complete the expert system consists of membership functions developed for each one of the variables and a set of 219 distributed inference rules in the 7 different modules. The developed knowledge base, which incorporates the mechanisms of logical reasoning of specialists, assists and guides, with efficiency, the teams that carry through the preliminary hazard analyses with the use of a computer program having previously inserted routines. The employed model incorporates in the knowledge base of the program the existing concepts in the categories of frequency and severity, under the form of membership functions of the linguistic variable and the set of rules. With this, scales subdivided in ranges, defined on the basis of the existing direction present in the risks matrices are used to define the actions to be taken for the analyzed accident scenarios. (author)

  1. Preliminary analysis of Stearoyl Co-A Desaturase gene transcripts in River buffalo

    Directory of Open Access Journals (Sweden)

    L. Ramunno

    2010-02-01

    Full Text Available Stearoyl-CoA desaturase (SCD is a key enzyme in the biosynthesis of monounsaturated fatty acids (MUFAs. In cattle, SCD gene extends over a DNA segment of ~17.0 Kb, and it is organized in 6 exons and 5 introns. The SCD gene has been indicated as the candidate gene to change the saturated/unsaturated FAs ratio and hence it has been suggested as the gene influencing the fat quality. In cattle, eight SNPs have been identified and one of them, (T→C at 231st nt of 5th exon, is responsible for the Val→Ala amino acid change. The C allele has been associated with higher content of MUFAs in carcasses, and it is positively related to a higher index of desaturation (C18:0/C18:1 and C16:0/C16:1 in the milk. In this study, we report on preliminary results of analysis of transcripts of the SCD encoding gene in river buffalo. The electrophoretic analysis of the RT-PCR products and the subsequent sequencing showed at least five different populations of mRNA. The most represented population is correctly assembled (~1300 bp, followed by the one which is deleted of ~750bp, corresponding to the 3rd, 4th and 5th exon and partially to the 2nd and 6th exon.

  2. Biomarkers of Eating Disorders Using Support Vector Machine Analysis of Structural Neuroimaging Data: Preliminary Results.

    Science.gov (United States)

    Cerasa, Antonio; Castiglioni, Isabella; Salvatore, Christian; Funaro, Angela; Martino, Iolanda; Alfano, Stefania; Donzuso, Giulia; Perrotta, Paolo; Gioia, Maria Cecilia; Gilardi, Maria Carla; Quattrone, Aldo

    2015-01-01

    Presently, there are no valid biomarkers to identify individuals with eating disorders (ED). The aim of this work was to assess the feasibility of a machine learning method for extracting reliable neuroimaging features allowing individual categorization of patients with ED. Support Vector Machine (SVM) technique, combined with a pattern recognition method, was employed utilizing structural magnetic resonance images. Seventeen females with ED (six with diagnosis of anorexia nervosa and 11 with bulimia nervosa) were compared against 17 body mass index-matched healthy controls (HC). Machine learning allowed individual diagnosis of ED versus HC with an Accuracy ≥ 0.80. Voxel-based pattern recognition analysis demonstrated that voxels influencing the classification Accuracy involved the occipital cortex, the posterior cerebellar lobule, precuneus, sensorimotor/premotor cortices, and the medial prefrontal cortex, all critical regions known to be strongly involved in the pathophysiological mechanisms of ED. Although these findings should be considered preliminary given the small size investigated, SVM analysis highlights the role of well-known brain regions as possible biomarkers to distinguish ED from HC at an individual level, thus encouraging the translational implementation of this new multivariate approach in the clinical practice.

  3. Biomarkers of Eating Disorders Using Support Vector Machine Analysis of Structural Neuroimaging Data: Preliminary Results

    Directory of Open Access Journals (Sweden)

    Antonio Cerasa

    2015-01-01

    Full Text Available Presently, there are no valid biomarkers to identify individuals with eating disorders (ED. The aim of this work was to assess the feasibility of a machine learning method for extracting reliable neuroimaging features allowing individual categorization of patients with ED. Support Vector Machine (SVM technique, combined with a pattern recognition method, was employed utilizing structural magnetic resonance images. Seventeen females with ED (six with diagnosis of anorexia nervosa and 11 with bulimia nervosa were compared against 17 body mass index-matched healthy controls (HC. Machine learning allowed individual diagnosis of ED versus HC with an Accuracy ≥ 0.80. Voxel-based pattern recognition analysis demonstrated that voxels influencing the classification Accuracy involved the occipital cortex, the posterior cerebellar lobule, precuneus, sensorimotor/premotor cortices, and the medial prefrontal cortex, all critical regions known to be strongly involved in the pathophysiological mechanisms of ED. Although these findings should be considered preliminary given the small size investigated, SVM analysis highlights the role of well-known brain regions as possible biomarkers to distinguish ED from HC at an individual level, thus encouraging the translational implementation of this new multivariate approach in the clinical practice.

  4. The 6 April 2009 earthquake at L'Aquila: a preliminary analysis of magnetic field measurements

    Directory of Open Access Journals (Sweden)

    U. Villante

    2010-02-01

    Full Text Available Several investigations reported the possible identification of anomalous geomagnetic field signals prior to earthquake occurrence. In the ULF frequency range, candidates for precursory signatures have been proposed in the increase in the noise background and polarization parameter (i.e. the ratio between the amplitude/power of the vertical component and that one of the horizontal component, in the changing characteristics of the slope of the power spectrum and fractal dimension, in the possible occurrence of short duration pulses. We conducted, with conventional techniques of data processing, a preliminary analysis of the magnetic field observations performed at L'Aquila during three months preceding the 6 April 2009 earthquake, focusing attention on the possible occurrence of features similar to those identified in previous events. Within the limits of this analysis, we do not find compelling evidence for any of the features which have been proposed as earthquake precursors: indeed, most of aspects of our observations (which, in some cases, appear consistent with previous findings might be interpreted in terms of the general magnetospheric conditions and/or of different sources.

  5. Crystallization and preliminary X-ray diffraction analysis of human adenovirus

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, V.S.; Natchiar, S.K.; Gritton, L.; Mullen, T.-M.; Stewart, P.L.; Nemerow, G.R. (Scripps); (Vanderbilt)

    2010-07-22

    Replication-defective and conditionally replicating adenovirus (AdV) vectors are currently being utilized in {approx}25% of human gene transfer clinical trials. Unfortunately, progress in vector development has been hindered by a lack of accurate structural information. Here we describe the crystallization and preliminary X-ray diffraction analysis of a HAdV5 vector that displays a short flexible fiber derived from HAdV35. Crystals of Ad35F were grown in 100 mM HEPES pH 7.0, 200 mM Ca(OAc){sub 2}, 14% PEG 550 MME, 15% glycerol in 100 mM Tris-HCl 8.5. Freshly grown crystals diffracted well to 4.5 {angstrom} resolution and weakly to 3.5 {angstrom} at synchrotron sources. HAdV crystals belong to space group P1 with unit cell parameters a = 854.03 {angstrom}, b = 855.17 {angstrom}, c = 865.24 {angstrom}, {alpha} = 119.57{sup o}, {beta} = 91.71{sup o}, {gamma} = 118.08{sup o} with a single particle in the unit cell. Self-rotation and locked-rotation function analysis allowed the determination of the particle orientation. Molecular replacement, density modification and phase-extension procedures are being employed for structure determination.

  6. Ocean thermal energy conversion cold water pipe preliminary design project. Task 2. Analysis for concept selection

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-04-01

    The successful performance of the CWP is of crucial importance to the overall OTEC system; the pipe itself is considered the most critical part of the entire operation. Because of the importance the CWP, a project for the analysis and design of CWP's was begun in the fall of 1978. The goals of this project were to study a variety of concepts for delivering cold water to an OTEC plant, to analyze and rank these concepts based on their relative cost and risk, and to develop preliminary design for those concepts which seemed most promising. Two representative platforms and sites were chosen: a spar buoy of a Gibbs and Cox design to be moored at a site off Punta Tuna, Puerto Rico, and a barge designed by APL/Johns Hopkins University, grazing about a site approximately 200 miles east of the coast of Brazil. The approach was to concentrate on the most promising concepts and on those which were either of general interest or espoused by others (e.g., steel and concrete concepts). Much of the overall attention, therefore, focused on analyzing rigid and compliant wall design, while stockade (except for the special case of the FRP stockade) and bottom-mounted concepts received less attention. A total of 67 CWP concepts were initially generated and subjected to a screening process. Of these, 16 were carried through design analysis, costing, and ranking. Study results are presented in detail. (WHK)

  7. Survival analysis models and applications

    CERN Document Server

    Liu, Xian

    2012-01-01

    Survival analysis concerns sequential occurrences of events governed by probabilistic laws.  Recent decades have witnessed many applications of survival analysis in various disciplines. This book introduces both classic survival models and theories along with newly developed techniques. Readers will learn how to perform analysis of survival data by following numerous empirical illustrations in SAS. Survival Analysis: Models and Applications: Presents basic techniques before leading onto some of the most advanced topics in survival analysis.Assumes only a minimal knowledge of SAS whilst enablin

  8. Preliminary scenarios and nuclide transport models for low-and intermediate-level repository system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youn Myoung; Han, Kyong Won; Hwang, Yong Soo; Kang, Chul Hyung

    2001-02-01

    Through the study 11 scenarios with which nuclide release from the low- and intermediate-level radioactive waste could be simulated and assessed are selected, based upon FEPs identified. For each scenario, some practical methodologies as well as mathematical models involved in modling of nuclide transport in various media are also proposed. It is considered that such methodologies can play a great role when real repository system is constructed and operated in very near future. Real repository system is anticipated not to be quite different with the repository system postulated through this study. Even though there shows very complicated features for relevant parameters associated with various phisical-, geohydrological-, and geochemical situation and even human society as well, it is very necessary to propose the methodologies for a quantitative assessment of the performance of the repository in order to use them as a template on the practical point of view of preliminary safety assessment. Mathematical models proposed could be easily adopted by such common computer codes as, for example, MIMOSA and MASCOT-K.

  9. Planning Genomic Study in an Animal Model of Depression: a Preliminary Report

    Directory of Open Access Journals (Sweden)

    Sara Farhang

    2011-09-01

    Full Text Available Introduction: Interaction of several genes is responsible for psychiatric diseases such as depression. Despite the numerous microarray studies in this field, findings are controversial and hard to conclude. Methods: Male Wistar rats were randomly selected to receive Chronic Mild Stress model for 4 weeks. Different aspects of depression were measured by forced swimming test, open field trial and sucrose preference tests in the experience group and controls. Results: Sucrose was preferred by 40% of CMS group and 80% of controls (p=0.025. Twenty percent of CMS group and 80% of controls were “active” (p=0.001. Last escape was at minute 238 for CMS group and minute 245 for controls and controls had more escape efforts. Conclusion: This paper is a preliminary report of a genomic study on animal model of depression which tries to achieve reliable results by a joint of clinical view with recent techniques. Predicted challenges in this procedure and the solutions as well as the limitations may be helpful for future researches.

  10. A Preliminary Model of Motivation for Pornography Consumption Among Men Participating in Zoophilic Virtual Environments.

    Science.gov (United States)

    de Souza Aranha E Silva, Renata Almeida; Baltieri, Danilo Antonio

    2016-01-01

    Although zoophilic blogs and websites attract the attention of zoophiles and others who are curious about this sexual activity, the motivations for consuming this type of pornography are not clear. This study aimed to confirm the factorial validity of the Pornography Consumption Inventory in an online sample of men with sexual interest in animals, and to construct an association model between motivations for pornography consumption and the following psychological variables: depression, sexual impulsiveness, and strength of sexual interest in animals. In this cross-sectional study, we located a website that catered to a network of people with a sexual interest in animals. Subsequently, a questionnaire was made available online to members of this network. Results support the 4-factor model of the Pornography Consumption Inventory. Depression and strength of sexual interest in animals were negatively and positively correlated with the sexual curiosity factor, respectively. Sexual impulsiveness was positively associated with the emotional avoidance, excitement seeking, and sexual pleasure factors. Depression and sexual impulsiveness were positively correlated. Psychological factors can differently motivate the consumption of pornography among men who visit zoophilic blogs and websites. With these preliminary data, we can identify some characteristics of this population.

  11. Hydrothermal Liquefaction and Upgrading of Municipal Wastewater Treatment Plant Sludge: A Preliminary Techno-Economic Analysis, Rev.1

    Energy Technology Data Exchange (ETDEWEB)

    Snowden-Swan, Lesley J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhu, Yunhua [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Susanne B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schmidt, Andrew J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hallen, Richard T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Billing, Justin M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Todd R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fox, Samuel P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Maupin, Gary D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-01

    A preliminary process model and techno-economic analysis (TEA) was completed for fuel produced from hydrothermal liquefaction (HTL) of sludge waste from a municipal wastewater treatment plant (WWTP) and subsequent biocrude upgrading. The model is adapted from previous work by Jones et al. (2014) for algae HTL, using experimental data generated in fiscal year 2015 (FY15) bench-scale HTL testing of sludge waste streams. Testing was performed on sludge samples received from Metro Vancouver’s Annacis Island WWTP (Vancouver, B.C.) as part of a collaborative project with the Water Environment and Reuse Foundation (WERF). The full set of sludge HTL testing data from this effort will be documented in a separate report to be issued by WERF. This analysis is based on limited testing data and therefore should be considered preliminary. In addition, the testing was conducted with the goal of successful operation, and therefore does not represent an optimized process. Future refinements are necessary to improve the robustness of the model, including a cross-check of modeled biocrude components with the experimental GCMS data and investigation of equipment costs most appropriate at the relatively small scales used here. Environmental sustainability metrics analysis is also needed to understand the broader impact of this technology pathway. The base case scenario for the analysis consists of 10 HTL plants, each processing 100 dry U.S. ton/day (92.4 ton/day on a dry, ash-free basis) of sludge waste and producing 234 barrel per stream day (BPSD) biocrude, feeding into a centralized biocrude upgrading facility that produces 2,020 barrel per standard day of final fuel. This scale was chosen based upon initial wastewater treatment plant data collected by PNNL’s resource assessment team from the EPA’s Clean Watersheds Needs Survey database (EPA 2015a) and a rough estimate of what the potential sludge availability might be within a 100-mile radius. In addition, we received

  12. Statistical model of fractures and deformation zones. Preliminary site description, Laxemar subarea, version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hermanson, Jan; Forssberg, Ola [Golder Associates AB, Stockholm (Sweden); Fox, Aaron; La Pointe, Paul [Golder Associates Inc., Redmond, WA (United States)

    2005-10-15

    The goal of this summary report is to document the data sources, software tools, experimental methods, assumptions, and model parameters in the discrete-fracture network (DFN) model for the local model volume in Laxemar, version 1.2. The model parameters presented herein are intended for use by other project modeling teams. Individual modeling teams may elect to simplify or use only a portion of the DFN model, depending on their needs. This model is not intended to be a flow model or a mechanical model; as such, only the geometrical characterization is presented. The derivations of the hydraulic or mechanical properties of the fractures or their subsurface connectivities are not within the scope of this report. This model represents analyses carried out on particular data sets. If additional data are obtained, or values for existing data are changed or excluded, the conclusions reached in this report, and the parameter values calculated, may change as well. The model volume is divided into two subareas; one located on the Simpevarp peninsula adjacent to the power plant (Simpevarp), and one further to the west (Laxemar). The DFN parameters described in this report were determined by analysis of data collected within the local model volume. As such, the final DFN model is only valid within this local model volume and the modeling subareas (Laxemar and Simpevarp) within.

  13. Modelling the Cooling of Coffee: Insights from a Preliminary Study in Indonesia

    Science.gov (United States)

    Widjaja, Wanty

    2010-01-01

    This paper discusses an attempt to examine pre-service teachers' mathematical modelling skills. A modelling project investigating relationships between temperature and time in the process of cooling of coffee was chosen. The analysis was based on group written reports of the cooling of coffee project and observation of classroom discussion.…

  14. CMS Analysis School Model

    Energy Technology Data Exchange (ETDEWEB)

    Malik, S. [Nebraska U.; Shipsey, I. [Purdue U.; Cavanaugh, R. [Illinois U., Chicago; Bloom, K. [Nebraska U.; Chan, Kai-Feng [Taiwan, Natl. Taiwan U.; D' Hondt, J. [Vrije U., Brussels; Klima, B. [Fermilab; Narain, M. [Brown U.; Palla, F. [INFN, Pisa; Rolandi, G. [CERN; Schörner-Sadenius, T. [DESY

    2014-01-01

    To impart hands-on training in physics analysis, CMS experiment initiated the concept of CMS Data Analysis School (CMSDAS). It was born over three years ago at the LPC (LHC Physics Centre), Fermilab and is based on earlier workshops held at the LPC and CLEO Experiment. As CMS transitioned from construction to the data taking mode, the nature of earlier training also evolved to include more of analysis tools, software tutorials and physics analysis. This effort epitomized as CMSDAS has proven to be a key for the new and young physicists to jump start and contribute to the physics goals of CMS by looking for new physics with the collision data. With over 400 physicists trained in six CMSDAS around the globe, CMS is trying to engage the collaboration in its discovery potential and maximize physics output. As a bigger goal, CMS is striving to nurture and increase engagement of the myriad talents, in the development of physics, service, upgrade, education of those new to CMS and the career development of younger members. An extension of the concept to the dedicated software and hardware schools is also planned, keeping in mind the ensuing upgrade phase.

  15. Report on preliminary analysis of state of nuclear criticality accident at JCO at Tokaimura, Ibaraki, Japan (I)

    Energy Technology Data Exchange (ETDEWEB)

    Ha, J.J.; Park, J.H.; Chang, J.H. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    This preliminary report was prepared by the Special Task Force Team of KAERI in order to analysis status of nuclear criticality accident broken out at 10:35 September 30, 1999 at JCO nuclear conversion test facility located at Tokaimura, Ibaraki, Japan. The report was consisted of accident summary of cause of accident summary of cause of accident and response by relevant organizations, and preliminary technical analysis of radiation exposure of JCO workers, analysis of cause of accident, and accident assessment and preventive actions against criticality accident. It is expected that JCO accident, Japan's first nuclear criticality accident, would make significant effects to Japan nuclear policy and would be also a good example to Korea future actions to be taken in use and development of nuclear energy. 63 refs., 3 figs., 1 tab. (Author)

  16. Interaction between GIS and hydrologic model: A preliminary approach using ArcHydro Framework Data Model

    Directory of Open Access Journals (Sweden)

    Silvio Jorge C. Simões

    2013-08-01

    Full Text Available In different regions of Brazil, population growth and economic development can degrade water quality, compromising watershed health and human supply. Because of its ability to combine spatial and temporal data in the same environment and to create water resources management (WRM models, the Geographical Information System (GIS is a powerful tool for managing water resources, preventing floods and estimating water supply. This paper discusses the integration between GIS and hydrological models and presents a case study relating to the upper section of the Paraíba do Sul Basin (Sao Paulo State portion, situated in the Southeast of Brazil. The case study presented in this paper has a database suitable for the basin’s dimensions, including digitized topographic maps at a 50,000 scale. From an ArcGIS®/ArcHydro Framework Data Model, a geometric network was created to produce different raster products. This first grid derived from the digital elevation model grid (DEM is the flow direction map followed by flow accumulation, stream and catchment maps. The next steps in this research are to include the different multipurpose reservoirs situated along the Paraíba do Sul River and to incorporate rainfall time series data in ArcHydro to build a hydrologic data model within a GIS environment in order to produce a comprehensive spatial temporal model.

  17. Preliminary Evaluation of the DUSTRAN Modeling Suite for Modeling Atmospheric Chloride Transport

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Philip; Tran, Tracy; Fritz, Bradley; Rutz, Frederick; Ross, Steven; Gorton, Alicia; Devanathan, Ram; Plante, Paul; Trainor, Kevin

    2016-05-03

    This study investigates the potential of DUSTRAN, a dust dispersion modeling system developed by Pacific Northwest National Laboratory, to model the transport of sea salt aerosols (SSA). Results from DUSTRAN simulations run with historical meteorological data were compared against privately-measured chloride data at the near coastal Maine Yankee Nuclear Power Plant (NPP) and the Environmental Protection Agency-measured CASTNET data from Acadia National Park (NP). The comparisons have provided both encouragement as to the practical value of DUSTRAN’s CALPUFF model and suggestions for further software development opportunities. All modeled concentrations were within one order of magnitude of those measured and a few test cases showed excellent agreement between modeled and measured concentrations. However, there is a lack of consistency in discrepancy which may be due to inaccurate extrapolation of meteorological data, underlying model physics, and the source term. Future research will refine the software to better capture physical phenomena. Overall, results indicate that with parameter refinement, DUSTRAN has the potential to simulate atmospheric chloride transport from known sources to inland sites for the purpose of determining the corrosion susceptibility of various structures, systems, and components at the site.

  18. Preliminary results on the EUCLID NISP stray-light and ghost analysis

    Science.gov (United States)

    Geis, Norbert; Grupp, Frank; Prieto, Eric; Bender, Ralf

    2015-09-01

    The EUCLID mission within the European Space Agencies 2015 - 2025 Cosmic Vision framework addresses cosmological questions related to dark matter and dark energy. EUCLID is equipped with two instruments that are simultaneously observing patches of > 0:5 square degree on the sky. The VIS visual light high spacial resolution imager and the NISP near infrared spectrometer and photometer are separated by a di-chroic beam splitter. With its large FoV (larger than the full moon disk), together with high demands on the optical performance and strong requirements on in flight stability lead to very challenging demands on alignment and post launch { post cool-down optical element position. In addition the demanding requirements from spectroscopy and galaxy photometry lead to a highly demanding stray light and ghost control need. With this paper we present a preliminary - PDR level - analysis of ghosting and stray light levels in the EUCLID NISP near infrared spectrometer and photometer. The analysis presented focuses on the photometric channel, as this, together with the wide field of the instrument, shows most of the challenges and features of the instrument. As one requirement is to have a non vignetting design, extensive baffling is not possible, and only secondary and higher order light can be actively baffled. A comprehensive ZEMAX based analysis is being presented, showing in summary that baffles are only necessary due to the EUCLID fine guiding sensors auxiliary fields of view. The total level of contaminating light is thereafter dominated by stray light from dust on the lenses. Ghosts play a minor role.

  19. Mathematical Model of Cold Cap—Preliminary One-Dimensional Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Pokorny, Richard; Hrma, Pavel R.

    2011-03-25

    The ultimate goal of batch-melting studies, laboratory-scale, large-scale, or mathematical modeling is to increase the rate of glass processing in an energy-efficient manner. Mathematical models are not merely an intermediate step between laboratory-scale and large-scale studies, but are also an important tool for assessing the responses of melters to vast combinations of process parameters. In the simplest melting situation considered in this study, a cold cap of uniform thickness rests on a pool of molten glass from which it receives a steady uniform heat flux. Thus, as the feed-to-glass conversion proceeds, the temperature, velocity, and extent of feed reactions are functions of the position along the vertical coordinate, and these functions do not vary with time. This model is used for the sensitivity analyses on the effects of key parameters on the cold-cap behavior.

  20. Crystallization and preliminary X-ray analysis of Chandipura virus glycoprotein G.

    Science.gov (United States)

    Baquero, Eduard; Buonocore, Linda; Rose, John K; Bressanelli, Stéphane; Gaudin, Yves; Albertini, Aurélie A

    2012-09-01

    Fusion in members of the Rhabdoviridae virus family is mediated by the G glycoprotein. At low pH, the G glycoprotein catalyzes fusion between viral and endosomal membranes by undergoing a major conformational change from a pre-fusion trimer to a post-fusion trimer. The structure of the G glycoprotein from vesicular stomatitis virus (VSV G), the prototype of Vesiculovirus, has recently been solved in its trimeric pre-fusion and post-fusion conformations; however, little is known about the structural details of the transition. In this work, a soluble form of the ectodomain of Chandipura virus G glycoprotein (CHAV G(th)) was purified using limited proteolysis of purified virus; this soluble ectodomain was also crystallized. This protein shares 41% amino-acid identity with VSV G and thus its structure could provide further clues about the structural transition of rhabdoviral glycoproteins induced by low pH. Crystals of CHAV G(th) obtained at pH 7.5 diffracted X-rays to 3.1 Å resolution. These crystals belonged to the orthorhombic space group P2(1)2(1)2, with unit-cell parameters a = 150.3, b = 228.2, c = 78.8 Å. Preliminary analysis of the data based on the space group and the self-rotation function indicated that there was no trimeric association of the protomers. This unusual oligomeric status could result from the presence of fusion intermediates in the crystal.

  1. Global volcanic earthquake swarm database and preliminary analysis of volcanic earthquake swarm duration

    Directory of Open Access Journals (Sweden)

    S. R. McNutt

    1996-06-01

    Full Text Available Global data from 1979 to 1989 pertaining to volcanic earthquake swarms have been compiled into a custom-designed relational database. The database is composed of three sections: 1 a section containing general information on volcanoes, 2 a section containing earthquake swarm data (such as dates of swarm occurrence and durations, and 3 a section containing eruption information. The most abundant and reliable parameter, duration of volcanic earthquake swarms, was chosen for preliminary analysis. The distribution of all swarm durations was found to have a geometric mean of 5.5 days. Precursory swarms were then separated from those not associated with eruptions. The geometric mean precursory swarm duration was 8 days whereas the geometric mean duration of swarms not associated with eruptive activity was 3.5 days. Two groups of precursory swarms are apparent when duration is compared with the eruption repose time. Swarms with durations shorter than 4 months showed no clear relationship with the eruption repose time. However, the second group, lasting longer than 4 months, showed a significant positive correlation with the log10 of the eruption repose period. The two groups suggest that different suites of physical processes are involved in the generation of volcanic earthquake swarms.

  2. In situ fluidization for peat bed rupture, and preliminary economic analysis.

    Science.gov (United States)

    Niven, R K; Khalili, N

    2002-11-01

    This study concerns in situ fluidization (ISF), a new remediation method with potential application to the remediation of NAPL and heavy metal contaminants, by their release from the fluidized zone generated by a water jet. The present study examines the effect of ISF on layers of peat, of significance owing to its role as an important NAPL and metal contaminant trap. Once trapped, such contaminants are not readily accessible by most remedial methods, due to the low permeability and diffusivity of the peat. A simple tank experiment is used to demonstrate rupture of a peat layer by ISF, with removal of the peat as elutriated fines and segregated peat chunks. The application of ISF in the field is then examined by three field trials in uncontaminated sands, in both saturated and unsaturated conditions. Fluidized depths of up to 1.9 m in the saturated zone (with refusal on a peat layer) and 2.5 m in the unsaturated zone (no refusal) were attained, using a 1.9-m-long, 50 mm diameter jet operated at 5-13 1 s(-1). Pulses of dark turbidity and shell fragments in the effluent indicated the rupture of peat and shelly layers. The experiments demonstrate the hydraulic viability of ISF in the field, and its ability to remove peat-based contaminants. The issues of appropriate jet design and water generation during ISF are discussed, followed by a preliminary economic analysis of ISF relative to existing remediation methods.

  3. Acanthamoeba polyphaga mimivirus NDK: preliminary crystallographic analysis of the first viral nucleoside diphosphate kinase

    Energy Technology Data Exchange (ETDEWEB)

    Jeudy, Sandra [Information Génomique et Structurale, CNRS UPR 2589, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France); Coutard, Bruno [Architecture et Fonction des Macromolecules Biologiques, CNRS UMR 6098, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France); Lebrun, Régine [IBSM, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France); Abergel, Chantal, E-mail: chantal.abergel@igs.cnrs-mrs.fr [Information Génomique et Structurale, CNRS UPR 2589, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France)

    2005-06-01

    A. polyphaga mimivirus, the largest known double-stranded DNA virus, is the first virus to exhibit a nucleoside diphosphate kinase gene. The expression and crystallization of the viral NDK are reported. The complete sequence of the largest known double-stranded DNA virus, Acanthamoeba polyphaga mimivirus, has recently been determined [Raoult et al. (2004 ▶), Science, 306, 1344–1350] and revealed numerous genes not expected to be found in a virus. A comprehensive structural and functional study of these gene products was initiated [Abergel et al. (2005 ▶), Acta Cryst. F61, 212–215] both to better understand their role in the virus physiology and to obtain some clues to the origin of DNA viruses. Here, the preliminary crystallographic analysis of the viral nucleoside diphosphate kinase protein is reported. The crystal belongs to the cubic space group P2{sub 1}3, with unit-cell parameter 99.425 Å. The self-rotation function confirms that there are two monomers per asymmetric unit related by a twofold non-crystallographic axis and that the unit cell thus contains four biological entities.

  4. GC-MS Analysis and Preliminary Antimicrobial Activity of Albizia adianthifolia (Schumach and Pterocarpus angolensis (DC

    Directory of Open Access Journals (Sweden)

    Mustapha N. Abubakar

    2016-01-01

    Full Text Available The non-polar components of two leguminoceae species Albizia adianthifolia (Schumach, and Pterocarpus angolensis (DC were investigated. GC-MS analysis of the crude n-hexane and chloroform extracts together with several chromatographic separation techniques led to the identification and characterization (using NMR of sixteen known compounds from the heartwood and stem bark of Albizia adianthifolia and Pterocarpus angolensis respectively. These constituents include, n-hexadecanoic acid (palmitic acid 1, oleic acid 2, chondrillasterol 3, stigmasterol 4, 24S 5α-stigmast-7-en-3β-ol 5, 9,12-octadecadienoic acid (Z,Z-, methyl ester 6, trans-13-octadecanoic acid, methyl ester 7, tetradecanoic acid 8, hexadecanoic acid, methyl ester 9, octadecanoic acid 10, tetratriacontane 11, 7-dehydrodiosgenin 12, lupeol 13, stigmasta-3,5-diene-7-one 14, friedelan-3-one (friedelin 15, and 1-octacosanol 16. Using agar over lay method, the preliminary antimicrobial assay for the extracts was carried out against bacterial (E. coli, P. aeruginosa, B. subtilis, S. aueus and a fungus/yeast (C. albicans strains. The n-hexane and chloroform extracts of A. adianthifolia showed the best activity against E. coli with minimum inhibition quantity (MIQ of 1 µg each while the remaining exhibited moderate-to-weak activity against the test microorganisms.

  5. Satellite geological and geophysical remote sensing of Iceland: Preliminary results from analysis of MSS imagery

    Science.gov (United States)

    Williams, R. S., Jr.; Boedvarsson, A.; Fridriksson, S.; Palmason, G.; Rist, S.; Sigtryggsson, H.; Thorarinsson, S.; Thorsteinsson, I.

    1973-01-01

    A binational, multidisciplinary research effort in Iceland is directed at an analysis of MSS imagery from ERTS-1 to study a variety of geologic, hydrologic, oceanographic, and agricultural phenomena. A preliminary evaluation of available MSS imagery of Iceland has yielded several significant results - some of which may have direct importance to the Icelandic economy. Initial findings can be summarized as follows: (1) recent lava flows can be delineated from older flows at Askja and Hekla; (2) MSS imagery from ERTS-1 and VHRR visible and infrared imagery from NOAA-2 recorded the vocanic eruption on Heimaey, Vestmann Islands; (3) coastline changes, particularly changes in the position of bars and beaches along the south coast are mappable; and (4) areas covered with new and residual snow can be mapped, and the appearance of newly fallen snow on ERTS-1, MSS band 7 appears dark where it is melting. ERTS-1 imagery provides a means of updating various types of maps of Iceland and will permit the compilation of special maps specifically aimed at those dynamic environmental phenomena which impact on the Icelandic economy.

  6. Marine Traffic Density Over Port Klang, Malaysia Using Statistical Analysis of AIS Data: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Masnawi MUSTAFFA

    2016-12-01

    Full Text Available Port Klang Malaysia is the 13th busiest port in the world, the capacity at the port expected to be able to meet the demand until 2018. It is one of the busiest ports in the world and also the busiest port in Malaysia. Even though there are statistics published by Port Klang Authority showing that a lot of ships using this port, this number is only based on ships that entering Port Klang. Therefore, no study has been done to investigate on how dense the traffic is in Port Klang, Malaysia the surrounding sea including Strait of Malacca . This paper has investigated on traffic density over Port Klang Malaysia and its surrounding sea using statistical analysis from AIS data. As a preliminary study, this study only collected AIS data for 7 days to represent daily traffic weekly. As a result, an hourly number of vessels, daily number of vessels, vessels classification and sizes and also traffic paths will be plotted.

  7. GC-MS Analysis and Preliminary Antimicrobial Activity of Albizia adianthifolia (Schumach) and Pterocarpus angolensis (DC).

    Science.gov (United States)

    Abubakar, Mustapha N; Majinda, Runner R T

    2016-01-28

    The non-polar components of two leguminoceae species Albizia adianthifolia (Schumach), and Pterocarpus angolensis (DC) were investigated. GC-MS analysis of the crude n-hexane and chloroform extracts together with several chromatographic separation techniques led to the identification and characterization (using NMR) of sixteen known compounds from the heartwood and stem bark of Albizia adianthifolia and Pterocarpus angolensis respectively. These constituents include, n-hexadecanoic acid (palmitic acid) 1, oleic acid 2, chondrillasterol 3, stigmasterol 4, 24S 5α-stigmast-7-en-3β-ol 5, 9,12-octadecadienoic acid (Z,Z)-, methyl ester 6, trans-13-octadecanoic acid, methyl ester 7, tetradecanoic acid 8, hexadecanoic acid, methyl ester 9, octadecanoic acid 10, tetratriacontane 11, 7-dehydrodiosgenin 12, lupeol 13, stigmasta-3,5-diene-7-one 14, friedelan-3-one (friedelin) 15, and 1-octacosanol 16. Using agar over lay method, the preliminary antimicrobial assay for the extracts was carried out against bacterial (E. coli, P. aeruginosa, B. subtilis, S. aueus) and a fungus/yeast (C. albicans) strains. The n-hexane and chloroform extracts of A. adianthifolia showed the best activity against E. coli with minimum inhibition quantity (MIQ) of 1 µg each while the remaining exhibited moderate-to-weak activity against the test microorganisms.

  8. Bioinformatics analysis of the gene expression profile of hepatocellular carcinoma: preliminary results

    Science.gov (United States)

    Li, Jia

    2016-01-01

    Aim of the study To analyse the expression profile of hepatocellular carcinoma compared with normal liver by using bioinformatics methods. Material and methods In this study, we analysed the microarray expression data of HCC and adjacent normal liver samples from the Gene Expression Omnibus (GEO) database to screen for differentially expressed genes. Then, functional analyses were performed using GenCLiP analysis, Gene Ontology categories, and aberrant pathway identification. In addition, we used the CMap database to identify small molecules that can induce HCC. Results Overall, 2721 differentially expressed genes (DEGs) were identified. We found 180 metastasis-related genes and constructed co-occurrence networks. Several significant pathways, including the transforming growth factor β (TGF-β) signalling pathway, were identified as closely related to these DEGs. Some candidate small molecules (such as betahistine) were identified that might provide a basis for developing HCC treatments in the future. Conclusions Although we functionally analysed the differences in the gene expression profiles of HCC and normal liver tissues, our study is essentially preliminary, and it may be premature to apply our results to clinical trials. Further research and experimental testing are required in future studies. PMID:27095935

  9. Occupant evaluation of commercial office lighting: Volume 2, Preliminary data analysis

    Energy Technology Data Exchange (ETDEWEB)

    Marans, R.W.; Brown, M.A. (ed.)

    1987-11-01

    This report presents the preliminary results of a post-occupancy evaluation of office lighting environments. It explores the relationship between quantitative measures of lighting in occupied environments and qualitative measures related to occupant satisfaction. The report analyzes several types of data from more than 1000 occupied work stations: subjective data on attitudes and ratings of selected lighting and other characteristics, photometric and other direct environmental data, including illuminances, luminances, and contrast conditions, indirect environmental measures obtained from the architectural drawings and the work station photographs, and descriptive characteristics of the occupants. The work stations were sampled from thirteen office buildings located in various cities in the United States. Many tentative findings emerged from the analysis, including the following: (1) within the range of values examined here, there is a tendency for lighting satisfaction to decrease as lighting power density increases; (2) occupants who described their work station spaces as bright also tended to be satisfied with their work station lighting; (3) occupants who were most bothered by bright lights and glare were most likely to express dissatisfaction with the lighting at their work stations; (4) there is no relationship between work-related activities of employees and indicators of lighting quality. More research is needed before firm conclusions can be drawn and before guidance regarding lighting standards and other policy issues can be derived. 3 refs., 9 figs.

  10. Analysis of the η′ photoproduction off the proton and preliminary beam asymmetry results at the GRAAL experiment

    Directory of Open Access Journals (Sweden)

    Mandaglio G.

    2014-05-01

    Full Text Available Differential and total cross section measurements on η′ photoproduction were published by the CLAS Collaboration (M. Dugger et al., Phys.Rev.Lett.96, 062001 (2006 and M. Williams et al., Phys.Rev.C80, 045213 (2009 for center-of-mass energies from near the threshold up to 2.84 GeV, and by the CB-ELSA-TAPS Collaboration (V. Crede et al., Phys.Rev.C80, 055202 (2009 up to 2.36 GeV and also making a precise threshold scan of the differential cross section in the 1446 – 1527.4 MeV γ beam energy range. However, the wide information about reaction cross sections are not sufficient to understand the role of resonances involved in the process. Different theoretical works stressed the importance to have also polarization observables in order to solve the ambiguity in the choice of the parameters used in their models. We present the analysis of the η′ photoproduction off the proton, identifying the meson via the γγ, π0π0η, and π+π−η decay modes by using the GRAAL apparatus; and we show the preliminary GRAAL results on the beam asymmetry Σ from the threshold (1.446 GeV up to 1.5 GeV.

  11. Brook trout (Salvelinus fontinalis extinction in small boreal lakes revealed by ephippia pigmentation: a preliminary analysis

    Directory of Open Access Journals (Sweden)

    Alexandre Bérubé Tellier

    2016-12-01

    Full Text Available Ephippium pigmentation is a plastic trait which can be related to a trade-off between visual predation pressure and better protection of cladoceran eggs against different types of stress. Experimental studies showed that planktivorous fish exert a greater predation pressure on individuals carrying darker ephippia, but little is known about the variation of ephippium pigmentation along gradients of fish predation pressure in natural conditions. For this study, our experimental design included four small boreal lakes with known fish assemblages. Two of the lakes have viable brook trout (Salvelinus fontinalis populations, whereas the other two lakes experienced brook trout extinctions during the 20th century. Cladoceran ephippia were extracted from sediment cores at layers corresponding to the documented post- extinction phase (1990's and from an older layer (1950's for which the brook trout population status is not known precisely. Our first objective was to determine whether brook trout extinction has a direct effect on both ephippium pigmentation and size. Our second objective was to give a preliminary assessment of the status of brook trout populations in the 1950's by comparing the variation in ephippia traits measured from this layer to those measured in the 1990's, for which the extinction patterns are well known. Cost-effective image analysis was used to assess variation in pigmentation levels in ephippia. This approach provided a proxy for the amount of melanin invested in each ephippium analysed. Our study clearly shows that ephippium pigmentation may represent a better indicator of the presence of fish predators than ephippium size, a trait that showed a less clear pattern of variation between lakes with and without fish. For the 1990's period, ephippia from fishless lakes were darker and showed a slight tendency to be larger than ephippia from lakes with brook trout. However, no clear differences in either ephippium size or pigmentation

  12. Who are portal users vs. early e-Visit adopters? A preliminary analysis.

    Science.gov (United States)

    Jung, C; Padman, R; Shevchik, G; Paone, S

    2011-01-01

    Patient portals and eVisits are gaining momentum due to increasing consumer demand for improved access to clinical information and services, availability of new technologies to deploy them and development of reimbursement initiatives by major payers. Despite increasing interest in online health consultation by consumers, adoption has been slow and little is known about the users of such services. In this study, we analyze the key features that distinguish early adopters of eVisits from portal consumers, in aggregate and in four distinct ambulatory practices, using data from a major healthcare provider in Western Pennsylvania. Preliminary results indicate that out of 10,532 portal users, the 336 patients who submitted 446 eVisits between April 1, 2009 and May 31, 2010 are younger on average, predominantly female, not retired, but in poorer health condition. They access the portal more frequently, indicating that they are potentially more involved in managing their health. Using fixed-effects logistic regression models to compare across practices, we note that practice indicator is a significant predictor of eVisit usage, perhaps due to the varying strategies used to build awareness and encourage adoption. Despite the small difference in out-of-pocket payment for eVisits covered by insurance vs. otherwise, insurance coverage for eVisits significantly contributes to increased usage. In ongoing work, additional characteristics of patients and practices that have access to the patient portal will be used to better delineate patients' choice of eVisit vs. the traditional office visit.

  13. Preliminary spatiotemporal analysis of the association between socio-environmental factors and suicide.

    Science.gov (United States)

    Qi, Xin; Tong, Shilu; Hu, Wenbiao

    2009-10-01

    The seasonality of suicide has long been recognised. However, little is known about the relative importance of socio-environmental factors in the occurrence of suicide in different geographical areas. This study examined the association of climate, socioeconomic and demographic factors with suicide in Queensland, Australia, using a spatiotemporal approach. Seasonal data on suicide, demographic variables and socioeconomic indexes for areas in each Local Government Area (LGA) between 1999 and 2003 were acquired from the Australian Bureau of Statistics. Climate data were supplied by the Australian Bureau of Meteorology. A multivariable generalized estimating equation model was used to examine the impact of socio-environmental factors on suicide. The preliminary data analyses show that far north Queensland had the highest suicide incidence (e.g., Cook and Mornington Shires), while the south-western areas had the lowest incidence (e.g., Barcoo and Bauhinia Shires) in all the seasons. Maximum temperature, unemployment rate, the proportion of Indigenous population and the proportion of population with low individual income were statistically significantly and positively associated with suicide. There were weaker but not significant associations for other variables. Maximum temperature, the proportion of Indigenous population and unemployment rate appeared to be major determinants of suicide at a LGA level in Queensland.

  14. Preliminary analysis of the Nocturnal Atmospheric Boundary Layer during the experimental campaign CIBA 2008

    Science.gov (United States)

    Yagüe, C.; Maqueda, G.; Ramos, D.; Sastre, M.; Viana, S.; Serrano, E.; Morales, G.; Ayarzagüena, B.; Viñas, C.; Sánchez, E.

    2009-04-01

    An Atmospheric Boundary Layer campaign was developed in Spain along June 2008 at the CIBA (Research Centre for the Lower Atmosphere) site which is placed on a fairly homogeneous terrain in the centre of an extensive plateau (41°49' N, 4°56' W). Different instrumentation at several levels was available on a new 10m meteorological mast, including temperature and humidity sensors, wind vanes and cup anemometers, as well as one sonic anemometer. Besides, two quartz-based microbarometers were installed at 50 and 100m on the main permanent 100m tower placed at CIBA. Three additional microbarometers were deployed on the surface on a triangular array of approximately 200 m side, and a tethered balloon was used in order to record vertical profiles of temperature, wind and humidity up to 1000m. Finally, a GRIMM particle monitor (MODEL 365), which can be used to continuously measure each six seconds simultaneously the PM10, PM2.5 and PM1 values, was deployed at 1.5m. This work will show some preliminary results from the campaign CIBA 2008, analysing the main physical processes present in the atmospheric Nocturnal Boundary Layer (NBL), the different stability periods observed and the corresponding turbulent parameters, as well as the coherent structures detected. The pressure perturbations measured from the surface and tower levels make possible to study the main wave parameters from wavelet transform, and compared the structures detected by the microbarometers with those detected in the wind and particles records.

  15. Pharmacoeconomic aspects related to the 13-valent pneumococcal conjugate vaccine: preliminary analysis of the data from the ASL of Viterbo

    Directory of Open Access Journals (Sweden)

    Dari Silvia

    2014-12-01

    Full Text Available INTRODUCTION: Streptococcus pneumoniae is a pathogen of considerable importance to public health because it causes morbidity and mortality on the world population. It has more than 90 serotypes with different epidemiological characteristics and pathogenicity. Some categories of the population are particularly vulnerable to infection. The Regional Plan for the Prevention of Lazio for vaccination, based on the national plan for the prevention for vaccination involves the active offer of vaccination no 13-valent PCV, with a target of at least 90% in children 24 months of age.OBJECTIVE: To begin to assess the real economic impact of disease attributable to Pneumococcus, starting from the analysis of hospital discharge records (SDO of the Viterbo's ASL.METHODS: The model is structured follows the observational approach of 33 months, from January 2012 to September 2014, selecting the SDO with a principal diagnosis of Streptococcus Pneumoniae diseases and those with a principal diagnosis of respiratory diseases without etiological diagnosis, which, with good approximation, it can be considered responsible for Streptococcus pneumoniae 40%.RESULTS: From the preliminary analysis of the data, evaluating only patients diagnosed due to Pneumococcus, is known as the only pediatric cases hospitalized are between 0 and 1 year. Therefore one might assume that vaccination disbursed to the child population with 13-valent PCV, has ensured effective protection to persons of the age group 2-18 years.CONCLUSIONS: The importance of this study is the observation conducted on an ASL, (similar in size and catchment area to many Italian realty of the vaccination coverage effects, as provided by PRPV Lazio Region, on hospitalizations by Pneumococcus. The study offers a moment of reflection for decision makers, as it would be interesting to conduct pharmacoeconomic’s analysis in the presence of vaccination strategies extended to adults, especially for those at risk

  16. Establishment of a P-glycoprotein substrate screening model and its preliminary application

    Institute of Scientific and Technical Information of China (English)

    Yi Wang; Jiang Cao; Su Zeng

    2004-01-01

    AIM: To establish a high P-glycoprotein (P-gp) expressing cell line as a model for studying drug absorption and distribution, and to explore the preliminary application of this screening model.METHODS: A full-length MDR1 cDNA fragment in plasmid pMDRA1 was first subcloned into plasmid pET28a(+), then MDR1 cDNA was cut from the recombinant plasmid with double-digestion and ligated into the mammalian expression vector pcDNA3.1(+). The recombinant plasmid pcDNA3.1(+)/MDR1 was transfected into breast cancer cell line Bcap37using the Superfect transfection reagent. Several stably transfected clones were obtained after selection with G418.Real-time fluorescent quantitative RT- PCR and Western blot methods were used to detect the expression of P-gp, and the cellular location of the expressed protein was determined by immunohistochemical staining. Drug sensitivity assay was used to evaluate the biological function of expressed P-gp.Concentration of quercetin in cells was determined by highperformance liquid chromatography (HPLC).RESULTS: The recombinant plasmid was confirmed to be inserted in the correct orientation by restrictive enzyme digestion and DNA sequencing. Real-time fluorescent quantitative RT-PCR showed a higher level of P-cp mRNA in transfected cells compared to that in the control cells, and the Western blot result also indicated that P-gp expression in transfected cells was higher than that in control cells. The immunohistochemical staining showed that the expressed P-gp was localized on cell membranes. Drug sensitivity assay showed that the IC50 for adriamycin and colchicine of the transfected cells was higher than that of the control cells.The concentration of quercetin in model cells was lower than that in control cells by HPLC. After P-gp inhibitor verapamil was administered, the concentration of quercetin in model cells was increased.CONCLUSION: A high P-gp expressing ceil line can be established, which could provide a suitable in vitro model system for

  17. Preliminary Analysis of Effects of Reduced Discharge onThermal Habitat of Pedersen Warm Springs Channel

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A preliminary report to study the potential impacts of possible flow reductions in thermal spring systems located in the Warm Springs area of Moapa Valley NWR on the...

  18. A Parametrical Transport Aircraft Fuselage Model for Preliminary Sizing and Beyond

    OpenAIRE

    Schwinn, Dominik; Kohlgrüber, Dieter; Scherer, Julian; Siemann, Martin

    2015-01-01

    Aircraft design generally comprises three consecutive phases: Conceptual, preliminary and detailed design phase. The preliminary design phase is of particular interest as the basic layout of the primary structure is defined. Up to date, semi-analytical methods are widely used in this design stage to estimate the structural mass. Although these methods lead to adequate results for the major aircraft components of standard configurations, the evaluation of new configurations (e.g. box wing, ble...

  19. Aespoe Pillar Stability Experiment. Final coupled 3D thermo-mechanical modeling. Preliminary particle mechanical modeling

    Energy Technology Data Exchange (ETDEWEB)

    Wanne, Toivo; Johansson, Erik; Potyondy, David [Saanio and Riekkola Oy, Helsinki (Finland)

    2004-02-01

    SKB is planning to perform a large-scale pillar stability experiment called APSE (Aespoe Pillar Stability Experiment) at Aespoe HRL. The study is focused on understanding and control of progressive rock failure in hard crystalline rock and damage caused by high stresses. The elastic thermo-mechanical modeling was carried out in three dimensions because of the complex test geometry and in-situ stress tensor by using a finite-difference modeling software FLAC3D. Cracking and damage formation were modeled in the area of interest (pillar between two large scale holes) in two dimensions by using the Particle Flow Code (PFC), which is based on particle mechanics. FLAC and PFC were coupled to minimize the computer resources and the computing time. According to the modeling the initial temperature rises from 15 deg C to about 65 deg C in the pillar area during the heating period of 120 days. The rising temperature due to thermal expansion induces stresses in the pillar area and after 120 days heating the stresses have increased about 33% from the excavation induced maximum stress of 150 MPa to 200 MPa in the end of the heating period. The results from FLAC3D model showed that only regions where the crack initiation stress has exceeded were identified and they extended to about two meters down the hole wall. These could be considered the areas where damage may occur during the in-situ test. When the other hole is pressurized with a 0.8 MPa confining pressure it yields that 5 MPa more stress is needed to damage the rock than without confining pressure. This makes the damaged area in some degree smaller. High compressive stresses in addition to some tensile stresses might induce some AE (acoustic emission) activity in the upper part of the hole from the very beginning of the test and are thus potential areas where AE activities may be detected. Monitoring like acoustic emissions will be measured during the test execution. The 2D coupled PFC-FLAC modeling indicated that

  20. Multiscale Signal Analysis and Modeling

    CERN Document Server

    Zayed, Ahmed

    2013-01-01

    Multiscale Signal Analysis and Modeling presents recent advances in multiscale analysis and modeling using wavelets and other systems. This book also presents applications in digital signal processing using sampling theory and techniques from various function spaces, filter design, feature extraction and classification, signal and image representation/transmission, coding, nonparametric statistical signal processing, and statistical learning theory. This book also: Discusses recently developed signal modeling techniques, such as the multiscale method for complex time series modeling, multiscale positive density estimations, Bayesian Shrinkage Strategies, and algorithms for data adaptive statistics Introduces new sampling algorithms for multidimensional signal processing Provides comprehensive coverage of wavelets with presentations on waveform design and modeling, wavelet analysis of ECG signals and wavelet filters Reviews features extraction and classification algorithms for multiscale signal and image proce...

  1. Pharmacognostic and Preliminary Phytochemical Analysis of Sauropus androgynus (L) Merr. Leaf

    OpenAIRE

    Ankad Gireesh; Hegde Harsha; Kholkute S.D; Hurkadale Pramod

    2013-01-01

    The leaves of Sauropus androgynus (L.) Merr. are used in traditional medicine to treat various disorders and also used as vegetable for its nutritive value. Such plant having medicinal and nutritive values lacks pharmacognostical and preliminary phytochemical information. Hence the present work is intended to study pharmacognostical and preliminary phytochemical studies, which will serve as quality control parameters. The pharmacognostical parameters like transverse section of midrib, epiderm...

  2. ROCK PROPERTIES MODEL ANALYSIS MODEL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Clinton Lum

    2002-02-04

    The purpose of this Analysis and Model Report (AMR) is to document Rock Properties Model (RPM) 3.1 with regard to input data, model methods, assumptions, uncertainties and limitations of model results, and qualification status of the model. The report also documents the differences between the current and previous versions and validation of the model. The rock properties models are intended principally for use as input to numerical physical-process modeling, such as of ground-water flow and/or radionuclide transport. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. This work was conducted in accordance with the following planning documents: WA-0344, ''3-D Rock Properties Modeling for FY 1998'' (SNL 1997, WA-0358), ''3-D Rock Properties Modeling for FY 1999'' (SNL 1999), and the technical development plan, Rock Properties Model Version 3.1, (CRWMS M&O 1999c). The Interim Change Notice (ICNs), ICN 02 and ICN 03, of this AMR were prepared as part of activities being conducted under the Technical Work Plan, TWP-NBS-GS-000003, ''Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01'' (CRWMS M&O 2000b). The purpose of ICN 03 is to record changes in data input status due to data qualification and verification activities. These work plans describe the scope, objectives, tasks, methodology, and implementing procedures for model construction. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. The work scope for this activity consists of the following: (1) Conversion of the input data (laboratory measured porosity data, x-ray diffraction mineralogy, petrophysical calculations of bound water, and petrophysical calculations of porosity) for each borehole into stratigraphic coordinates; (2) Re-sampling and merging of data sets; (3

  3. Early detection of breast cancer using total biochemical analysis of peripheral blood components: a preliminary study.

    Science.gov (United States)

    Zelig, Udi; Barlev, Eyal; Bar, Omri; Gross, Itai; Flomen, Felix; Mordechai, Shaul; Kapelushnik, Joseph; Nathan, Ilana; Kashtan, Hanoch; Wasserberg, Nir; Madhala-Givon, Osnat

    2015-05-15

    Most of the blood tests aiming for breast cancer screening rely on quantification of a single or few biomarkers. The aim of this study was to evaluate the feasibility of detecting breast cancer by analyzing the total biochemical composition of plasma as well as peripheral blood mononuclear cells (PBMCs) using infrared spectroscopy. Blood was collected from 29 patients with confirmed breast cancer and 30 controls with benign or no breast tumors, undergoing screening for breast cancer. PBMCs and plasma were isolated and dried on a zinc selenide slide and measured under a Fourier transform infrared (FTIR) microscope to obtain their infrared absorption spectra. Differences in the spectra of PBMCs and plasma between the groups were analyzed as well as the specific influence of the relevant pathological characteristics of the cancer patients. Several bands in the FTIR spectra of both blood components significantly distinguished patients with and without cancer. Employing feature extraction with quadratic discriminant analysis, a sensitivity of ~90 % and a specificity of ~80 % for breast cancer detection was achieved. These results were confirmed by Monte Carlo cross-validation. Further analysis of the cancer group revealed an influence of several clinical parameters, such as the involvement of lymph nodes, on the infrared spectra, with each blood component affected by different parameters. The present preliminary study suggests that FTIR spectroscopy of PBMCs and plasma is a potentially feasible and efficient tool for the early detection of breast neoplasms. An important application of our study is the distinction between benign lesions (considered as part of the non-cancer group) and malignant tumors thus reducing false positive results at screening. Furthermore, the correlation of specific spectral changes with clinical parameters of cancer patients indicates for possible contribution to diagnosis and prognosis.

  4. Crystallization and preliminary X-ray diffraction analysis of L-threonine dehydrogenase (TDH) from the hyperthermophilic archaeon Thermococcus kodakaraensis.

    Science.gov (United States)

    Bowyer, A; Mikolajek, H; Wright, J N; Coker, A; Erskine, P T; Cooper, J B; Bashir, Q; Rashid, N; Jamil, F; Akhtar, M

    2008-09-01

    The enzyme L-threonine dehydrogenase catalyses the NAD(+)-dependent conversion of L-threonine to 2-amino-3-ketobutyrate, which is the first reaction of a two-step biochemical pathway involved in the metabolism of threonine to glycine. Here, the crystallization and preliminary crystallographic analysis of L-threonine dehydrogenase (Tk-TDH) from the hyperthermophilic organism Thermococcus kodakaraensis KOD1 is reported. This threonine dehydrogenase consists of 350 amino acids, with a molecular weight of 38 kDa, and was prepared using an Escherichia coli expression system. The purified native protein was crystallized using the hanging-drop vapour-diffusion method and crystals grew in the tetragonal space group P4(3)2(1)2, with unit-cell parameters a = b = 124.5, c = 271.1 A. Diffraction data were collected to 2.6 A resolution and preliminary analysis indicates that there are four molecules in the asymmetric unit of the crystal.

  5. Preliminary study of verteporfin photodynamic therapy in a canine prostate model

    Science.gov (United States)

    Huang, Zheng; Hetzel, Fred; Dole, Ken; Luck, David; Beckers, Jill; Maul, Don

    2009-06-01

    Photodynamic therapy (PDT) mediated with verteporfin was investigated as an alternative modality for the treatment of prostate cancer. Materials and Methods: Vertoporfin-mediated photodynamic effects on the prostate and its adjacent structures (underlying colon and bladder) were evaluated in a healthy canine model. Interstitial prostate PDT was performed by irradiating individual lobes with a diode laser (689 nm) and 1-cm cylindrical diffuser fibers at various light doses and drug-light intervals (DLI) to activate the IV administrated photosensitizer (0.5 or 2 mg/kg). The sensitivity of the adjacent tissues to Vertoporfin-PDT was determined by superficially irradiating the serosal surface of the bladder and colon with a microlens fiber. The prostate and adjacent tissues were harvested one-week after the treatment and subjected to histopathological examination. Results: Histopathological examinations confirmed that verteporfin PDT could destroy a clinically significant volume of prostatic tissue in the animal model. At the drug dose of 0.5 mg/kg, the light irradiation of 100 J/cm could induce a lesion diameter of 2 cm at DLI of 15 min and 1.2 cm at DLI of 3 hrs, respectively. This implies a strong influence of DLI on the lesion volume. The shorter DLI might produce stronger vascular effect and therefore more severe tissue damage. The colon was more sensitive to verteporfin PDT than the bladder. At the possible light dose level caused by light scattering during intra-prostate irradiation, the damage to the bladder and colon were superficial and minimal. Conclusions: The preliminary results clearly demonstrate that verteporfin PDT could be an effective means to destroy prostate gland and its usefulness for the treatment of prostate cancer is worth further investigation.

  6. Dynamical ice sheet model coupling with the GEOS-5 AGCM: A preliminary assessment

    Science.gov (United States)

    Cullather, R. I.; Zhao, B.; Nowicki, S.; Suarez, M. J.

    2013-12-01

    Dynamical ice sheet models (ISMs) have been developed to address well-known limitations in eustatic change prediction capabilities. Coupling ISMs to an atmospheric general circulation model (AGCM) is not straightforward, due in part to the extreme difference in spatial scales between the ISM mesh and AGCM grid. In given locations, ISM element edge lengths may be a few km or less, while the AGCM typically has grid spacings on the order of 10s to 100s of km. The Goddard Earth Observing System Model, version 5 (GEOS-5) is a finite-volume AGCM and employs a cube-sphere atmospheric grid (nominally 1° resolution) and a catchment-based land surface scheme that operates on sub-grid scale areas, or tiles, that describe surface characteristics. The land surface component communicates with the atmosphere on a semi-implicit time step via the exchange grid. In this study, coupling between the AGCM and the ISM is facilitated through sub-grid scale land surface tiles that are defined for each element of the ISM. The ISM used here is the Ice Sheet System Model (ISSM) from NASA Jet Propulsion Laboratory and Univ. California at Irvine, which has been adapted for the Greenland Ice Sheet using the 72,320-element Schlagel mesh and using a shallow ice approximation. In the AGCM, land surface tiles are uniquely characterized through a simple downscaling parameterization of surface temperature within each AGCM grid box using a defined lapse rate. On each land surface tile, GEOS-5 employs an advanced snow hydrology model for improved representation of the ice sheet surface mass balance. This preliminary assessment focuses on the differences in the AGCM surface mass balance and surface temperature fields resulting from the downscaling measures employed in the context of an exchange grid, semi-implicit coupling with the atmosphere, and the response of the ISM. Differences in AGCM computational performance with the addition of Greenland tiles is examined, and comparative advantages of

  7. Life sciences domain analysis model.

    Science.gov (United States)

    Freimuth, Robert R; Freund, Elaine T; Schick, Lisa; Sharma, Mukesh K; Stafford, Grace A; Suzek, Baris E; Hernandez, Joyce; Hipp, Jason; Kelley, Jenny M; Rokicki, Konrad; Pan, Sue; Buckler, Andrew; Stokes, Todd H; Fernandez, Anna; Fore, Ian; Buetow, Kenneth H; Klemm, Juli D

    2012-01-01

    Meaningful exchange of information is a fundamental challenge in collaborative biomedical research. To help address this, the authors developed the Life Sciences Domain Analysis Model (LS DAM), an information model that provides a framework for communication among domain experts and technical teams developing information systems to support biomedical research. The LS DAM is harmonized with the Biomedical Research Integrated Domain Group (BRIDG) model of protocol-driven clinical research. Together, these models can facilitate data exchange for translational research. The content of the LS DAM was driven by analysis of life sciences and translational research scenarios and the concepts in the model are derived from existing information models, reference models and data exchange formats. The model is represented in the Unified Modeling Language and uses ISO 21090 data types. The LS DAM v2.2.1 is comprised of 130 classes and covers several core areas including Experiment, Molecular Biology, Molecular Databases and Specimen. Nearly half of these classes originate from the BRIDG model, emphasizing the semantic harmonization between these models. Validation of the LS DAM against independently derived information models, research scenarios and reference databases supports its general applicability to represent life sciences research. The LS DAM provides unambiguous definitions for concepts required to describe life sciences research. The processes established to achieve consensus among domain experts will be applied in future iterations and may be broadly applicable to other standardization efforts. The LS DAM provides common semantics for life sciences research. Through harmonization with BRIDG, it promotes interoperability in translational science.

  8. Frailty Models in Survival Analysis

    CERN Document Server

    Wienke, Andreas

    2010-01-01

    The concept of frailty offers a convenient way to introduce unobserved heterogeneity and associations into models for survival data. In its simplest form, frailty is an unobserved random proportionality factor that modifies the hazard function of an individual or a group of related individuals. "Frailty Models in Survival Analysis" presents a comprehensive overview of the fundamental approaches in the area of frailty models. The book extensively explores how univariate frailty models can represent unobserved heterogeneity. It also emphasizes correlated frailty models as extensions of

  9. - and Syn-Eruptive Surface Movements of Azerbaijan Mud Volcanoes Detected Through Insar Analysis: Preliminary Results

    Science.gov (United States)

    Antonielli, Benedetta; Monserrat, Oriol; Bonini, Marco; Righini, Gaia; Sani, Federico; Luzi, Guido; Feyzullayev, Akper; Aliyev, Chingiz

    2014-05-01

    Mud volcanism is a process that consists in the extrusion of mud, fragments or blocks of country rocks, saline waters and gases, mostly methane. This mechanism is typically linked to in-depth hydrocarbon traps, and it builds up a variety of conical edifices with dimension and morphology similar to those of magmatic volcanoes. Interferometry by Satellite Aperture Radar (InSAR) techniques have been commonly used to monitor and investigate the ground deformation connected to the eruptive phases of magmatic volcanoes. InSAR techniques have also been employed to explore the ground deformation associated with the LUSI mud volcano in Java (Indonesia). We aim to carry out a study on the paroxysmal activities of the Azerbaijan mud volcanoes, among the largest on Earth, using similar techniques. In particular the deformations of the mud volcanic systems were analyzed through the technique of satellite differential interferometry (DInSAR), thanks to the acquisition of 16 descending and 4 ascending Envisat images, spanning about 4 years (October 2003-November 2007); these data were provided by the European Space Agency. The preliminary analysis of a set of 77 interferograms and the unwrapping process elaboration of some of them selected according to the best coherence values, allowed the detection of significant deformations in correspondence of Ayaz-Akhtarma and Khara Zira Island mud volcanoes. This analysis has allowed to identify relevant ground deformations of the volcanic systems in connection with the main eruptive events in 2005 and in 2006 respectively, that are recorded by the catalogue of Azerbaijan mud volcano eruptions until 2007. The preliminary analysis of the interferograms of the Ayaz-Akhtarma and the Khara Zira mud volcanoes shows that the whole volcano edifice or part of it is subject to a ground displacement before or in coincidence with the eruption. Assuming that the movement is mainly vertical, we suppose that deformation is due to bulging of the volcanic

  10. Flow cytometric analysis of oil palm: a preliminary analysis for cultivars and genomic DNA alteration

    Directory of Open Access Journals (Sweden)

    Warawut Chuthammathat

    2005-12-01

    Full Text Available DNA contents of oil palm (Elaeis guineensis Jacq. cultivars were analyzed by flow cytometry using different external reference plant species. Analysis using corn (Zea mays line CE-777 as a reference plant gave the highest DNA content of oil palm (4.72±0.23 pg 2C-1 whereas the DNA content was found to be lower when using soybean (Glycine max cv. Polanka (3.77±0.09 pg 2C-1 or tomato (Lycopersicon esculentum cv. Stupicke (4.25±0.09 pg 2C-1 as a reference. The nuclear DNA contents of Dura (D109, Pisifera (P168 and Tenera (T38 cultivars were 3.46±0.04, 3.24±0.03 and 3.76±0.04 pg 2C-1 nuclei, respectively, using soybean as a reference. One haploid genome of oil palm therefore ranged from 1.56 to 1.81±109 base pairs. DNA contents from one-year-old calli and cell suspension of oil palm were found to be significantly different from those of seedlings. It thus should be noted that genomic DNA alteration occurred in these cultured tissues. We therefore confirm that flow cytometric analysis could verify cultivars, DNA content and genomic DNA alteration of oil palm using soybean as an external reference standard.

  11. Delight2 Daylighting Analysis in Energy Plus: Integration and Preliminary User Results

    Energy Technology Data Exchange (ETDEWEB)

    Carroll, William L.; Hitchcock, Robert J.

    2005-04-26

    DElight is a simulation engine for daylight and electric lighting system analysis in buildings. DElight calculates interior illuminance levels from daylight, and the subsequent contribution required from electric lighting to meet a desired interior illuminance. DElight has been specifically designed to integrate with building thermal simulation tools. This paper updates the DElight capability set, the status of integration into the simulation tool EnergyPlus, and describes a sample analysis of a simple model from the user perspective.

  12. Stochastic modeling analysis and simulation

    CERN Document Server

    Nelson, Barry L

    1995-01-01

    A coherent introduction to the techniques for modeling dynamic stochastic systems, this volume also offers a guide to the mathematical, numerical, and simulation tools of systems analysis. Suitable for advanced undergraduates and graduate-level industrial engineers and management science majors, it proposes modeling systems in terms of their simulation, regardless of whether simulation is employed for analysis. Beginning with a view of the conditions that permit a mathematical-numerical analysis, the text explores Poisson and renewal processes, Markov chains in discrete and continuous time, se

  13. Command Process Modeling & Risk Analysis

    Science.gov (United States)

    Meshkat, Leila

    2011-01-01

    Commanding Errors may be caused by a variety of root causes. It's important to understand the relative significance of each of these causes for making institutional investment decisions. One of these causes is the lack of standardized processes and procedures for command and control. We mitigate this problem by building periodic tables and models corresponding to key functions within it. These models include simulation analysis and probabilistic risk assessment models.

  14. Preliminary Modelling Results for an Otto Cycle/Stirling Cycle Hybrid-engine-based Power Generation System

    OpenAIRE

    Cullen, Barry; McGovern, Jim; Feidt, Michel; Petrescu, Stoian

    2009-01-01

    This paper presents preliminary data and results for a system mathematical model for a proposed Otto Cycle / Stirling Cycle hybrid-engine-based power generation system. The system is a combined cycle system with the Stirling cycle machine operating as a bottoming cycle on the Otto cycle exhaust. The application considered is that of a stationary power generation scenario wherein the Stirling cycle engine operates as a waste heat recovery device on the exhaust stream of the Otto cycle engine. ...

  15. Model building techniques for analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Walther, Howard P.; McDaniel, Karen Lynn; Keener, Donald; Cordova, Theresa Elena; Henry, Ronald C.; Brooks, Sean; Martin, Wilbur D.

    2009-09-01

    The practice of mechanical engineering for product development has evolved into a complex activity that requires a team of specialists for success. Sandia National Laboratories (SNL) has product engineers, mechanical designers, design engineers, manufacturing engineers, mechanical analysts and experimentalists, qualification engineers, and others that contribute through product realization teams to develop new mechanical hardware. The goal of SNL's Design Group is to change product development by enabling design teams to collaborate within a virtual model-based environment whereby analysis is used to guide design decisions. Computer-aided design (CAD) models using PTC's Pro/ENGINEER software tools are heavily relied upon in the product definition stage of parts and assemblies at SNL. The three-dimensional CAD solid model acts as the design solid model that is filled with all of the detailed design definition needed to manufacture the parts. Analysis is an important part of the product development process. The CAD design solid model (DSM) is the foundation for the creation of the analysis solid model (ASM). Creating an ASM from the DSM currently is a time-consuming effort; the turnaround time for results of a design needs to be decreased to have an impact on the overall product development. This effort can be decreased immensely through simple Pro/ENGINEER modeling techniques that summarize to the method features are created in a part model. This document contains recommended modeling techniques that increase the efficiency of the creation of the ASM from the DSM.

  16. Thermal energy storage in aquifiers: preliminary information

    Energy Technology Data Exchange (ETDEWEB)

    Allen, R.D.

    1979-12-01

    Topics discussed include: conceptual designs; numerical modelling; field experiments; relevant technical information; feasibility studies; preliminary aquifer selection considerations; and preliminary design and operating considerations. (TFD)

  17. A preliminary analysis of climate change effect on long-term risk-based design of flood defense

    Science.gov (United States)

    Wang, L.; Van Gelder, P. H. A. J. M.; Vrijling, J. K.

    2012-04-01

    The lifetime of a flood defense usually lasts for decades or centuries. The future flood probabilistic distribution is not stationary due to climate change. Therefore in the long-term design of flood defense systems, the effect of climate change should be taken into account. The design height of Bengbu dike segment (about 10 km) along Huai River in China is studied as an example to explore the potential effects of climate change on long-term risk-based design. The economic-optimal design height of the dike is determined based on cost-benefit analysis. In this analysis the incremental investments in more safety are balanced with the reduction of the risk. Since climate change will result in the change of flood probability and hence the change of flooding risk, the optimal height might be shifted. To describe the possible future climate, the ensemble prediction of Global Climate Models (GCMs) is used in the study. River runoff series, which is required in deriving annual probability of peak runoff, is obtained by forcing a hydrological model with each GCM climate prediction. Then the probability of high water level in the river is derived based on the relationship between water level and peak runoff. The probability of flooding is assumed to equal to the exceedance probability of the high water level in the river. The possible future flood risk is calculated based on the flooding probability estimates, and is corresponding to each member of the GCMs ensemble. The result will provide information about the significance of potential effects of climate change on the long-term design of flood defense. With comparison to the baseline period, the shift of risk curve in future will be shown on the cost-benefit diagram as well as the change of economic optimal design dike height. As it is a preliminary analysis in this study a sensitivity analysis will be carried out. The sensitivity of use of GCMs ensemble, the damage value and the investment cost will be investigated.

  18. Towards a new structural model of the sense of humor: preliminary findings

    OpenAIRE

    N.D.van

    2012-01-01

    In this article some formal, content-related and procedural considerations towards the sense of humor are articulated and the analysis of both everyday humor behavior and of comic styles leads to the initial proposal of a four factor- model of humor (4FMH). This model is tested in a new dataset and it is also examined whether two forms of comic styles (benevolent humor and moral mockery) do fit in. The model seems to be robust but further studies on the structure of the sense of humor as a pe...

  19. Analysis of Optimization for Preliminary Design of Multi-Component Mooring Systems

    Institute of Scientific and Technical Information of China (English)

    YU Long; TAN Jia-hua

    2005-01-01

    Multi-component mooring systems become widely used in deep water position-keeping of drilling and production platforms. However, versatile materials make it difficult to design appropriate mooring lines made of several segments. Based on catenary equations of a multi-component mooring line at a specific water depth, this paper establishes a minimum model for designing this kind of lines. The model is solved by Genetic Algorithm and Multi-Objective Planning respectively. The model is verified by its application to a practical mooring design assignment-a quasi-static analysis for a large semi-submersible. The optimal result is finally obtained with the aid of design graphs.

  20. Preliminary risk analysis applied to the handling of health-care waste

    Directory of Open Access Journals (Sweden)

    Carvalho S.M.L.

    2002-01-01

    Full Text Available Between 75% and 90% of the waste produced by health-care providers no risk or is "general" health-care waste, comparable to domestic waste. The remaining 10-25% of health-care waste is regarded as hazardous due to one or more of the following characteristics: it may contain infectious agents, sharps, toxic or hazardous chemicals or it may be radioactive. Infectious health-care waste, particularly sharps, has been responsible for most of the accidents reported in the literature. In this work the preliminary risks analysis (PRA technique was used to evaluate practices in the handling of infectious health-care waste. Currently the PRA technique is being used to identify and to evaluate the potential for hazard of the activities, products, and services from facilities and industries. The system studied was a health-care establishment which has handling practices for infectious waste. Thirty-six procedures related to segregation, containment, internal collection, and storage operation were analyzed. The severity of the consequences of the failure (risk that can occur from careless management of infectious health-care waste was classified into four categories: negligible, marginal, critical, and catastrophic. The results obtained in this study showed that events with critics consequences, about 80%, may occur during the implementation of the containment operation, suggesting the need to prioritize this operation. As a result of the methodology applied in this work, a flowchart the risk series was also obtained. In the flowchart the events that can occur as a consequence of a improper handling of infectious health-care waste, which can cause critical risks such as injuries from sharps and contamination (infection from pathogenic microorganisms, are shown.

  1. Identification of succinic semialdehyde reductases from Geobacter: expression,purification, crystallization, preliminary functional, and crystallographic analysis

    Institute of Scientific and Technical Information of China (English)

    Yanfeng Zhang; Xiaoli Gao; Yi Zheng; R. Michae; Garavito

    2011-01-01

    Succinic semialdehyde reductase (SSAR) is an important enzyme involved in γ-aminobutyrate (GABA) metabolism.By converting succinic semialdehyde (SSA) to γ-hydroxybutyrate (GHB),the SSAR facilitates an alternative pathway for GABA degradation.In this study,we identified SSARs from Geobacter sulfurreducens and Geobacter metallireducens (GsSSAR and GmSSAR,respectively).The enzymes were over-expressed in Escherichia coil and purified to near homogeneity.Both GsSSAR and GmSSAR showed the activity of reducing SSA using nicotinamide adenine dinucleotide phosphate as a co-factor.The oligomeric sizes of GsSSAR and GmSSAR,as determined by analytical size exclusion chromatography,suggest that the enzymes presumably exist as tetramers in solution.The recombinant GsSSAR and GmSSAR crystallized in the presence of NADP+,and the resulting crystals diffracted to 1.89 (A) (GsSSAR) and 2.25 (A)(GmSSAR) resolution.The GsSSAR and GmSSAR crystals belong to the space groups P21221 (a =99.61 (A),b =147.49 (A),c =182.47 A) and P1 (a =75.97 (A) b =79.14 (A) c =95.47 (A),α =82.15°,β =88.80°,γ=87.66°),respectively.Preliminary crystallographic data analysis suggests the presence of eight protein monomers in the asymmetric units for both GsSSAR and GmSSAR.

  2. Identification of succinic semialdehyde reductases from Geobacter: expression, purification, crystallization, preliminary functional, and crystallographic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yanfeng; Gao, Xiaoli; Zheng, Yi; Garavito, R. Michael (MSU)

    2012-04-30

    Succinic semialdehyde reductase (SSAR) is an important enzyme involved in {gamma}-aminobutyrate (GABA) metabolism. By converting succinic semialdehyde (SSA) to {gamma}-hydroxybutyrate (GHB), the SSAR facilitates an alternative pathway for GABA degradation. In this study, we identified SSARs from Geobacter sulfurreducens and Geobacter metallireducens (GsSSAR and GmSSAR, respectively). The enzymes were over-expressed in Escherichia coli and purified to near homogeneity. Both GsSSAR and GmSSAR showed the activity of reducing SSA using nicotinamide adenine dinucleotide phosphate as a co-factor. The oligomeric sizes of GsSSAR and GmSSAR, as determined by analytical size exclusion chromatography, suggest that the enzymes presumably exist as tetramers in solution. The recombinant GsSSAR and GmSSAR crystallized in the presence of NADP{sup +}, and the resulting crystals diffracted to 1.89 {angstrom} (GsSSAR) and 2.25 {angstrom} (GmSSAR) resolution. The GsSSAR and GmSSAR crystals belong to the space groups P2{sub 1}22{sub 1} (a = 99.61 {angstrom}, b = 147.49 {angstrom}, c = 182.47 {angstrom}) and P1 (a = 75.97 {angstrom}, b = 79.14 {angstrom}, c = 95.47 {angstrom}, {alpha} = 82.15{sup o}, {beta} = 88.80{sup o}, {gamma} = 87.66{sup o}), respectively. Preliminary crystallographic data analysis suggests the presence of eight protein monomers in the asymmetric units for both GsSSAR and GmSSAR.

  3. Purification, crystallization and preliminary structural analysis of nucleoside diphosphate kinase from Bacillus anthracis

    Energy Technology Data Exchange (ETDEWEB)

    Misra, Gauri [Molecular and Structural Biology Division, Central Drug Research Institute, PO Box 173, Chattar Manzil, Mahatma Gandhi Marg, Lucknow 226 001 (India); Aggarwal, Anita [Institute of Genomics and Integrative Biology, Mall Road, Delhi 110 007 (India); Mittal, Sonia [Molecular and Structural Biology Division, Central Drug Research Institute, PO Box 173, Chattar Manzil, Mahatma Gandhi Marg, Lucknow 226 001 (India); Singh, Yogendra [Institute of Genomics and Integrative Biology, Mall Road, Delhi 110 007 (India); Ramachandran, Ravishankar, E-mail: r-ravishankar@cdri.res.in [Molecular and Structural Biology Division, Central Drug Research Institute, PO Box 173, Chattar Manzil, Mahatma Gandhi Marg, Lucknow 226 001 (India)

    2007-12-01

    Nucleoside diphosphate kinase from B. anthracis has been crystallized. Preliminary crystallographic analysis shows that there is one monomer in the asymmetric unit of the crystal. Bacillus anthracis nucleoside diphosphate kinase (BaNdk) is an enzyme whose primary function is to maintain deoxynucleotide triphosphate (dNTP) pools by converting deoxynucleotide diphosphates to triphosphates using ATP as the major phosphate donor. Although the structures of Ndks from a variety of organisms have been elucidated, the enzyme from sporulating bacteria has not been structurally characterized to date. Crystals of the B. anthracis enzyme were grown using the vapour-diffusion method from a hanging drop consisting of 2 µl 10 mg ml{sup −1} protein in 50 mM Tris–HCl pH 8.0, 50 mM NaCl, 5 mM EDTA equilibrated against 500 µl reservoir solution consisting of 2.25 M ammonium formate and 0.1 M HEPES buffer pH 7.25. Diffraction data extending to 2.0 Å were collected at room temperature from a single crystal with unit-cell parameters a = b = 107.53, c = 52.3 Å. The crystals are hexagonal in shape and belong to space group P6{sub 3}22. The crystals contain a monomer in the asymmetric unit, which corresponds to a Matthews coefficient (V{sub M}) of 2.1 Å{sup 3} Da{sup −1} and a solvent content of about 36.9%.

  4. The Structural Properties of Sexual Fantasies for Sexual Offenders: A Preliminary Model

    Science.gov (United States)

    Gee, Dion; Ward, Tony; Belofastov, Aleksandra; Beech, Anthony

    2006-01-01

    While the phenomenon of sexual fantasy has been researched extensively, little contemporary inquiry has investigated the structural properties of sexual fantasy within the context of sexual offending. In this study, a qualitative analysis was used to develop a descriptive model of the phenomena of sexual fantasy during the offence process.…

  5. A Combination of Preliminary Electroweak Measurements and Constraints on the Standard Model

    Energy Technology Data Exchange (ETDEWEB)

    Abbaneo, J

    2004-01-08

    This note presents a combination of published and preliminary electroweak results from the four LEP collaborations and the SLD collaboration which were prepared for the 2003 summer conferences. Averages from Z resonance results are derived for hadronic and leptonic cross sections, the leptonic forward-backward asymmetries, the {tau} polarization asymmetries, the b{bar b} and c{bar c} partial widths and forward-backward asymmetries and the q{bar q} charge asymmetry. Above the Z resonance, averages are derived for di-fermion cross sections and forward-backward asymmetries, photon-pair, W-pair, Z-pair, single-W and single-Z cross sections, electroweak gauge boson couplings, W mass and width and W decay branching ratios. Also, an investigation of the interference of photon and Z-boson exchange is presented, and colour reconnection and Bose-Einstein correlation analyses in W-pair production are combined. The main changes with respect to the experimental results presented in summer 2002 are updates to the mass of the W boson, four-fermion cross sections and gauge couplings, all measured at LEP-2, and the LEP heavy-flavour results measured at the Z pole. The results are compared with precise electroweak measurements from other experiments, notably the recent final result on the electroweak mixing angle determined in neutrino-nucleon scattering by the NuTeV collaboration and the new result in atomic parity violation in Caesium. The parameters of the Standard Model are evaluated, first using the combined LEP electroweak measurements, and then using the full set of electroweak results.

  6. A Combination of Preliminary Electroweak Measurements And Constraints on the Standard Model (2004)

    Energy Technology Data Exchange (ETDEWEB)

    Abbaneo, D.

    2005-03-07

    This note presents a combination of published and preliminary electroweak results from the four LEP collaborations and the SLD collaboration which were prepared for the 2004 summer conferences. Averages from Z resonance results are derived for hadronic and leptonic cross sections, the leptonic forward-backward asymmetries, the {tau} polarization asymmetries, the b{bar b} and c{bar c} partial widths and forward-backward asymmetries and the q{bar q} charge asymmetry. Above the Z resonance, averages are derived for di-fermion cross sections and forward-backward asymmetries, photon-pair, W-pair, Z-pair, single-W and single-Z cross sections, electroweak gauge boson couplings, W mass and width and W decay branching ratios. Also, an investigation of the interference of photon and Z-boson exchange is presented, and colour reconnection and Bose-Einstein correlation analyses in W-pair production are combined. The main changes with respect to the experimental results presented in summer 2003 are updates to the W branching fractions and four-fermion cross sections measured at LEP-2, and the SLD/LEP heavy-flavour results measured at the Z pole. The results are compared with precise electroweak measurements from other experiments, notably the final result on the electroweak mixing angle determined in neutrino-nucleon scattering by the NuTeV collaboration, the latest result in atomic parity violation in Caesium, and the measurement of the electroweak mixing angle in Moller scattering. The parameters of the Standard Model are evaluated, first using the combined LEP electroweak measurements, and then using the full set of high-Q{sup 2} electroweak results.

  7. Preliminary Investigations on Uncertainty Analysis of Wind-Wave Predictions in Lake Michigan

    CERN Document Server

    Nekouee, Navid

    2015-01-01

    With all the improvement in wave and hydrodynamics numerical models, the question rises in our mind that how the accuracy of the forcing functions and their input can affect the results. In this paper, a commonly used numerical third generation wave model, SWAN is applied to predict waves in Lake Michigan. Wind data were analyzed to determine wind variation frequency over Lake Michigan. Wave predictions uncertainty due to wind local effects were compared during a period where wind had a fairly constant speed and direction over the northern and southern basins. The study shows that despite model calibration in Lake Michigan area, the model deficiency arises from ignoring wind effects in small scales. Wave prediction also emphasizes that small scale turbulence in meteorological forces can increase error in predictions up to 35%. Wave frequency and coherence analysis showed that both models are able to reveal the time scale of the wave variation with same accuracy. Insufficient number of meteorological stations ...

  8. Preliminary safety analysis of high-intensity interval training (HIIT) in persons with chronic stroke.

    Science.gov (United States)

    Carl, Daniel L; Boyne, Pierce; Rockwell, Bradley; Gerson, Myron; Khoury, Jane; Kissela, Brett; Dunning, Kari

    2017-03-01

    The purpose of this study was to assess safety via electrocardiographic (ECG), blood pressure (BP), heart rate (HR), and orthopedic responses to 3 different high-intensity interval training (HIIT) protocols in persons with stroke. Eighteen participants (10 male; 61.9 + 8.3 years of age; 5.8 + 4.2 years poststroke) completed a symptom-limited graded exercise test (GXT) with ECG monitoring to screen for eligibility and determine HR peak. The 3 HIIT protocols involved repeated 30 s bursts of treadmill walking at maximum speed alternated with rest periods of 30 s (P30), 1 min (P60), or 2 min (P120). Sessions were performed in random order and included 5 min warm up, 20 min HIIT, and 5 min cool down. Variables measured included ECG activity, BP, HR, signs and symptoms of cardiovascular intolerance, and orthopedic concerns. Generalized linear mixed models and Tukey-Kramer adjustment were used to compare protocols using p HIIT session. HIIT elicited HRs in excess of 88% of measured HRpeak including 6 (P30), 8 (P60), and 2 (P120) participants eliciting a HR response above their GXT HRpeak. Both maximum BP and HR were significantly higher in P30 and P60 relative to P120. Preliminary data indicate that persons with chronic stroke who have been prescreened with an ECG stress test, a symptom-limited GXT, and a harness for fall protection may safely participate in HIIT, generating substantially higher HRs than what is seen in traditional moderate intensity training.

  9. How do Organizational Learning and Market Conditions Affect the Relationship between Entrepreneurial Orientation and Firm Growth? A Preliminary Analysis on Small and Medium Size Hotels in Peninsular Malaysia

    National Research Council Canada - National Science Library

    Azilah Kasim; Levent Altinay

    2016-01-01

      This is a preliminary analysis on the influence of organizational learning and market conditions on the relationships between entrepreneurial orientation and growth of small and medium size hotels...

  10. Urban Form Energy Use and Emissions in China: Preliminary Findings and Model Proof of Concept

    Energy Technology Data Exchange (ETDEWEB)

    Aden, Nathaniel; Qin, Yining; Fridley, David

    2010-12-15

    Urbanization is reshaping China's economy, society, and energy system. Between 1990 and 2008 China added more than 300 million new urban residents, bringing the total urbanization rate to 46%. The ongoing population shift is spurring energy demand for new construction, as well as additional residential use with the replacement of rural biomass by urban commercial energy services. This project developed a modeling tool to quantify the full energy consequences of a particular form of urban residential development in order to identify energy- and carbon-efficient modes of neighborhood-level development and help mitigate resource and environmental implications of swelling cities. LBNL developed an integrated modeling tool that combines process-based lifecycle assessment with agent-based building operational energy use, personal transport, and consumption modeling. The lifecycle assessment approach was used to quantify energy and carbon emissions embodied in building materials production, construction, maintenance, and demolition. To provide more comprehensive analysis, LBNL developed an agent-based model as described below. The model was applied to LuJing, a residential development in Jinan, Shandong Province, to provide a case study and model proof of concept. This study produced results data that are unique by virtue of their scale, scope and type. Whereas most existing literature focuses on building-, city-, or national-level analysis, this study covers multi-building neighborhood-scale development. Likewise, while most existing studies focus exclusively on building operational energy use, this study also includes embodied energy related to personal consumption and buildings. Within the boundaries of this analysis, food is the single largest category of the building energy footprint, accounting for 23% of the total. On a policy level, the LCA approach can be useful for quantifying the energy and environmental benefits of longer average building lifespans. In

  11. Analysis of the operation of a diffraction-radiation generator with preliminary HF modulation

    Science.gov (United States)

    Pivovarova, A. G.

    1991-05-01

    The excitation conditions and output characteristics of a diffraction-radiation generator with preliminary HF modulation are determined. Attention is given to the effects of the modulation parameter, the phase shift, and the aiming distance on the displacement of the generation zone, variations of the minimum starting current, the frequency shift, the oscillation amplitude, and the efficiency of the generator. It is shown that the efficiency of a generator with preliminary HF modulation can be twice as high as that of a generator without modulation.

  12. Preliminary Analysis of Ground-based Orbit Determination Accuracy for the Wide Field Infrared Survey Telescope (WFIRST)

    Science.gov (United States)

    Sease, Brad

    2017-01-01

    The Wide Field Infrared Survey Telescope is a 2.4-meter telescope planned for launch to the Sun-Earth L2 point in 2026. This paper details a preliminary study of the achievable accuracy for WFIRST from ground-based orbit determination routines. The analysis here is divided into two segments. First, a linear covariance analysis of early mission and routine operations provides an estimate of the tracking schedule required to meet mission requirements. Second, a simulated operations scenario gives insight into the expected behavior of a daily Extended Kalman Filter orbit estimate over the first mission year given a variety of potential momentum unloading schemes.

  13. Preliminary results of modeling fluid flow in the Hellenic accretionary complex, Eastern Mediterranean

    Science.gov (United States)

    Kufner, S. K.; Huepers, A.; Kopf, A.; Wenzel, F.

    2011-12-01

    , wedge geometry and subduction rate. The porosity values in the subductione zone are calculated by converting interval velocities from seismic sections using an empirical relationship. The dehydration source is calculated using a kinematic reaction model. Laboratory consolidation tests were run to determine the relationship between porosity and permeability. Preliminary results show that the accreted sediment's porosity reduces rapidly near the deformation front and fluids from compaction are predominantly expelled near the trench. At higher temperature and pressure mineral dehydration becomes the major source of fluid production. Different simulation inputs show that the magnitude of total fluid production is a function of estimated taper angle, permeability of the sediment and internal water sources bound in hydrous minerals. Compared to the overriding wedge the underthrust section is significantly overpressured. This observation is supported by higher porosities inferred from seismic velocities. The future study will compare model outputs with measurements from long-term deployed flow meters and in situ pore pressure probes, gravity core data and critical taper theory to obtain best fits in-situ conditions.

  14. Modeling EEG fractal dimension changes in wake and drowsy states in humans--a preliminary study.

    Science.gov (United States)

    Bojić, Tijana; Vuckovic, Aleksandra; Kalauzi, Aleksandar

    2010-01-21

    Aim of this preliminary study was to examine and compare topographic distribution of Higuchi's fractal dimension (FD, measure of signal complexity) of EEG signals between states of relaxed wakefulness and drowsiness, as well as their FD differences. The experiments were performed on 10 healthy individuals using a fourteen-channel montage. An explanation is offered on the causes of the detected FD changes. FD values of 60s records belonging to wake (Hori's stage 1) and drowsy (Hori's stages 2-4) states were calculated for each channel and each subject. In 136 out of 140 epochs an increase in FD was obtained. Relationship between signal FD and its relative alpha amplitude was mathematically modeled and we quantitatively demonstrated that the increase in FD was predominantly due to a reduction in alpha activity. The model was generalized to include other EEG oscillations. By averaging FD values for each channel across 10 subjects, four clusters (O2O1; T6P4T5P3; C3F3F4C4F8F7; T4T3) for the wake and two clusters (O2O1P3T6P4T5; C3C4F4F3F8T4T3F7) for the drowsy state were statistically verified. Topographic distribution of FD values in wakefulness showed a lateral symmetry and a partial fronto-occipital gradient. In drowsiness, a reduction in the number of clusters was detected, due to regrouping of channels T3, T4, O1 and O2. Topographic distribution of absolute FD differences revealed largest values at F7, O1 and F3. Reorganization of channel clusters showed that regionalized brain activity, specific for wakefulness, became more global by entering into drowsiness. Since the global increase in FD during wake-to-drowsy transition correlated with the decrease of alpha power, we inferred that increase of EEG complexity may not necessarily be an index of brain activation.

  15. A text-based data mining and toxicity prediction modeling system for a clinical decision support in radiation oncology: A preliminary study

    Science.gov (United States)

    Kim, Kwang Hyeon; Lee, Suk; Shim, Jang Bo; Chang, Kyung Hwan; Yang, Dae Sik; Yoon, Won Sup; Park, Young Je; Kim, Chul Yong; Cao, Yuan Jie

    2017-08-01

    The aim of this study is an integrated research for text-based data mining and toxicity prediction modeling system for clinical decision support system based on big data in radiation oncology as a preliminary research. The structured and unstructured data were prepared by treatment plans and the unstructured data were extracted by dose-volume data image pattern recognition of prostate cancer for research articles crawling through the internet. We modeled an artificial neural network to build a predictor model system for toxicity prediction of organs at risk. We used a text-based data mining approach to build the artificial neural network model for bladder and rectum complication predictions. The pattern recognition method was used to mine the unstructured toxicity data for dose-volume at the detection accuracy of 97.9%. The confusion matrix and training model of the neural network were achieved with 50 modeled plans (n = 50) for validation. The toxicity level was analyzed and the risk factors for 25% bladder, 50% bladder, 20% rectum, and 50% rectum were calculated by the artificial neural network algorithm. As a result, 32 plans could cause complication but 18 plans were designed as non-complication among 50 modeled plans. We integrated data mining and a toxicity modeling method for toxicity prediction using prostate cancer cases. It is shown that a preprocessing analysis using text-based data mining and prediction modeling can be expanded to personalized patient treatment decision support based on big data.

  16. Development of the Taiwanese Mandarin Main Concept Analysis (TM-MCA: Normative and Preliminary Aphasic Data

    Directory of Open Access Journals (Sweden)

    Anthony Pak Hin Kong

    2014-03-01

    Full Text Available Introduction Compared to the English literature, there is a great paucity of studies focusing on quantitative analysis of aphasic oral discourse in Chinese, especially for native speakers of Taiwanese-Mandarin residing in Taiwan. Several studies that investigated deficits of aphasic discourse have been conducted in Cantonese Chinese, including the Cantonese Linguistic Communication Measure (CLCM, Kong & Law, 2004, Main Concept Analysis (MCA; Kong, 2009, and Cantonese version of the Quantitative Production Analysis (Law, 2001; Yiu & Worrall, 1996. Clinical or research application of these systems to the Taiwanese population is limited by the differences of phonology, semantics, and grammar between Taiwanese Mandarin and Cantonese. The current study, therefore, aimed to develop a culturally appropriate Taiwan Mandarin Main Concept Analysis (TM-MCA, by translating and adapting the MCA in Cantonese (Kong, 2009, 2011, and then to validate the tool on the basis of normal speakers and people with aphasia in Taiwan. Method Picture stimuli and main concepts for the TM-MCA: Eight certified Taiwanese SLPs participated and listed all main concepts upon presentation of the sequential pictures in Kong (2009. A main concept referred to a statement consisting of only one main verb with two or more pieces of essential information accurately related to the pictures and informative about the content. All main concepts mentioned by six out of eight SLPs were included in a preliminary main concept list. Further validation of the list involved recruiting eight normal speakers to orally describe the same picture sets. Only those scored as Accurate and Complete (AC or Accurate but Incomplete (AI by at least five speakers were put in the final list. Normative and aphasic data collection and analysis: Thirty six native Taiwanese Mandarin speakers and ten individuals with aphasia orally perform the same picture description tasks. Six measures, including Number of Accurate

  17. Parallel LC circuit model for multi-band absorption and preliminary design of radiative cooling.

    Science.gov (United States)

    Feng, Rui; Qiu, Jun; Liu, Linhua; Ding, Weiqiang; Chen, Lixue

    2014-12-15

    We perform a comprehensive analysis of multi-band absorption by exciting magnetic polaritons in the infrared region. According to the independent properties of the magnetic polaritons, we propose a parallel inductance and capacitance(PLC) circuit model to explain and predict the multi-band resonant absorption peaks, which is fully validated by using the multi-sized structure with identical dielectric spacing layer and the multilayer structure with the same strip width. More importantly, we present the application of the PLC circuit model to preliminarily design a radiative cooling structure realized by merging several close peaks together. This omnidirectional and polarization insensitive structure is a good candidate for radiative cooling application.

  18. GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of Jasminum cuspidatum leaves

    Directory of Open Access Journals (Sweden)

    Singumsetty Vinay

    2014-12-01

    Full Text Available The purpose of the present study was investigating the GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of the leaves of Jasminum cuspidatum. The anti-diabetic activity was investigated in streptozotocin-induced diabetes rats with treatment of ethanol extract at the dose level of 200 and 400 mg/kg, which was compared with glibenclamide at a dose level of 4 mg/kg and the parameter measured being the blood glucose, total cholesterol, HDL, LDL, VLDL, triglycerides, and total protein. An oral glucose tolerance test (OGTT was also investigated in experimental rats. The GC-MS analysis revealed that the ethanol extract contained seven phytoconstituents. Preliminary phytochemical screening showed the presence of triterpenoids, flavonoids, glycosides and steroids. The result of in vivo anti-diabetic activity revealed that the ethanol extract of J. cuspidatum showed significant anti-diabetic activity.

  19. Preliminary results of Physiological plant growth modelling for human life support in space

    Science.gov (United States)

    Sasidharan L, Swathy; Dussap, Claude-Gilles; Hezard, Pauline

    2012-07-01

    Human life support is fundamental and crucial in any kind of space explorations. MELiSSA project of European Space Agency aims at developing a closed, artificial ecological life support system involving human, plants and micro organisms. Consuming carbon dioxide and water from the life support system, plants grow in one of the chambers and convert it into food and oxygen along with potable water. The environmental conditions, nutrient availability and its consumption of plants should be studied and necessarily modeled to predict the amount of food, oxygen and water with respect to the environmental changes and limitations. The reliability of a completely closed system mainly depends on the control laws and strategies used. An efficient control can occur, only if the system to control is itself well known, described and ideally if the responses of the system to environmental changes are predictable. In this aspect, the general structure of plant growth model has been designed together with physiological modelling.The physiological model consists of metabolic models of leaves, stem and roots, of which concern specific metabolisms of the associated plant parts. On the basis of the carbon source transport (eg. sucrose) through stem, the metabolic models (leaf and root) can be interconnected to each other and finally coupled to obtain the entire plant model. For the first step, leaf metabolic model network was built using stoichiometric, mass and energy balanced metabolic equations under steady state approach considering all necessary plant pathways for growth and maintenance of leaves. As the experimental data for lettuce plants grown in closed and controlled environmental chambers were available, the leaf metabolic model has been established for lettuce leaves. The constructed metabolic network is analyzed using known stoichiometric metabolic technique called metabolic flux analysis (MFA). Though, the leaf metabolic model alone is not sufficient to achieve the

  20. Effects of Social Psychological Phenomena on School Psychologists' Ethical Decision-Making: A Preliminary Empirical Analysis

    Science.gov (United States)

    Klose, Laurie McGarry; Lasser, Jon; Reardon, Robert F.

    2012-01-01

    This preliminary, exploratory study examines the impact of select social psychological phenomena on school-based ethical decision-making of school psychologists. Responses to vignettes and hypothetical statements reflecting several social psychological phenomena were collected from 106 practicing school psychologists. Participants were asked to…

  1. Preliminary analysis of species partitioning in the DWPF melter. Sludge batch 7A

    Energy Technology Data Exchange (ETDEWEB)

    Choi, A. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Smith III, F. G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-01-01

    The work described in this report is preliminary in nature since its goal was to demonstrate the feasibility of estimating the off-gas carryover from the Defense Waste Processing Facility (DWPF) melter based on a simple mass balance using measured feed and glass pour stream (PS) compositions and time-averaged melter operating data over the duration of one canister-filling cycle.

  2. Preliminary bioelectrical impedance analysis (BIA) equation for body composition assessment in young females from Colombia

    Science.gov (United States)

    Caicedo-Eraso, J. C.; González-Correa, C. H.; González-Correa, C. A.

    2013-04-01

    A previous study showed that reported BIA equations for body composition are not suitable for Colombian population. The purpose of this study was to develop and validate a preliminary BIA equation for body composition assessment in young females from Colombia, using hydrodensitometry as reference method. A sample of 30 young females was evaluated. Inclusion and exclusion criteria were defined to minimize the variability of BIA. Height, weight, BIA, residual lung volume (RV) and underwater weight (UWW) were measured. A preliminary BIA equation was developed (r2 = 0.72, SEE = 2.48 kg) by stepwise multiple regression with fat-free mass (FFM) as dependent variable and weight, height and impedance measurements as independent variables. The quality of regression was evaluated and a cross-validation against 50% of sample confirmed that results obtained with the preliminary BIA equation is interchangeable with results obtained with hydrodensitometry (r2 = 0.84, SEE = 2.62 kg). The preliminary BIA equation can be used for body composition assessment in young females from Colombia until a definitive equation is developed. The next step will be increasing the sample, including a second reference method, as deuterium oxide dilution (D2O), and using multi-frequency BIA (MF-BIA). It would also be desirable to develop equations for males and other ethnic groups in Colombia.

  3. A preliminary study on electromyographic analysis of the paraspinal musculature in idiopathic scoliosis

    NARCIS (Netherlands)

    Cheung, J.; Halbertsma, J.P.; Veldhuizen, A.G.; Sluiter, W.J.; Maurits, N.M.; Cool, J.C.; van Horn, J.R.

    2005-01-01

    The paraspinal muscles have been implicated as a major causative factor in the progression of idiopathic scoliosis. Therefore, the objectives of this preliminary study were to measure the electromyographic activity (EMG) of the paraspinal muscles to determine its relationship to progression of the s

  4. A Sensitivity Study for an Evaluation of Input Parameters Effect on a Preliminary Probabilistic Tsunami Hazard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Rhee, Hyun-Me; Kim, Min Kyu; Choi, In-Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Sheen, Dong-Hoon [Chonnam National University, Gwangju (Korea, Republic of)

    2014-10-15

    The tsunami hazard analysis has been based on the seismic hazard analysis. The seismic hazard analysis has been performed by using the deterministic method and the probabilistic method. To consider the uncertainties in hazard analysis, the probabilistic method has been regarded as attractive approach. The various parameters and their weight are considered by using the logic tree approach in the probabilistic method. The uncertainties of parameters should be suggested by analyzing the sensitivity because the various parameters are used in the hazard analysis. To apply the probabilistic tsunami hazard analysis, the preliminary study for the Ulchin NPP site had been performed. The information on the fault sources which was published by the Atomic Energy Society of Japan (AESJ) had been used in the preliminary study. The tsunami propagation was simulated by using the TSUNAMI{sub 1}.0 which was developed by Japan Nuclear Energy Safety Organization (JNES). The wave parameters have been estimated from the result of tsunami simulation. In this study, the sensitivity analysis for the fault sources which were selected in the previous studies has been performed. To analyze the effect of the parameters, the sensitivity analysis for the E3 fault source which was published by AESJ was performed. The effect of the recurrence interval, the potential maximum magnitude, and the beta were suggested by the sensitivity analysis results. Level of annual exceedance probability has been affected by the recurrence interval.. Wave heights have been influenced by the potential maximum magnitude and the beta. In the future, the sensitivity analysis for the all fault sources in the western part of Japan which were published AESJ would be performed.

  5. Preliminary study for extension and improvement on modeling of primary water stress corrosion cracking at control rod drive mechanism nozzles of pressurized water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Aly, Omar F.; Mattar Neto, Miguel M. [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Sao Paulo, SP (Brazil)], e-mail: ofaly@ipen.br, e-mail: mmattar@ipen.br; Schvartzman, Monica M.M.A.M. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)], e-mail: monicas@cdtn.br

    2009-07-01

    This study is for to extend, to improve the existing models, and to propose a local approach to assess the primary water stress corrosion cracking in nickel-based components. It is includes a modeling of new data for Alloy 182 and new considerations about initiation and crack growth according a developing method based on EPRI-MRP-115 (2004), and USNRC NUREG/CR-6964 (2008). The experimental data is obtained from CDTN-Brazilian Nuclear Technology Development Center, by tests through slow strain rate test (SSRT) equipment. The model conception assumed is a built diagram which indicates a thermodynamic condition for the occurrence of corrosion submodes in essayed materials, through Pourbaix diagrams, for Nickel Alloys in high temperature primary water. Over them, are superimposed different models, including a semi-empiric-probabilistic one to quantify the primary water stress corrosion cracking susceptibility, and a crack growth model. These constructed models shall be validated with the experimental data. This development aims to extent some of the models obtained to weld metals like the Alloy 182, and to improve the originals obtained according methodologies exposed in above referred reports. These methodologies comprise laboratory testing procedures, data collecting, data screening, modeling procedures, assembling of data from some laboratories in the world, plotting of results, compared analysis and discussion of these results. Preliminary results for Alloy 182 will be presented. (author)

  6. Synthesis, Spectral Analysis and Preliminary in Vitro Evaluation of Some Tetrapyrrolic Complexes with 3d Metal Ions

    Directory of Open Access Journals (Sweden)

    Radu Socoteanu

    2015-08-01

    Full Text Available In this paper, two tetrapyrrolic complexes, Zn(II-5-(3-hydroxyphenyl-10,15,20-tris-(4-acetoxy-3-methoxyphenylporphyrin and Cu(II-5-(3-hydroxyphenyl-10,15,20-tris-(4-acetoxy-3-methoxyphenylporphyrin were synthesized, and characterized from a spectral and biological point of view. The study provided data concerning the behavior of identical external substituents vs. two different core insertions. Some of the properties of the proposed tetrapyrrolic structures were highlighted, having photodynamic therapy of cancer as a targeted biomedical application. Elemental analysis, NMR, FTIR and UV-Vis data in various solvents were provided. A preliminary in vitro study on normal and cancer cultured cells was carried out for biocompatibility assessment in dark conditions. The preliminary in vitro study performed on human peripheral mononuclear cells exposed to tetrapyrrolic compounds (2 µM showed that the proposed compounds had a convenient cytotoxic profile on human normal peripheral blood mononuclear cells under dark conditions. Meanwhile, the investigated compounds reduced the number of metabolically active breast tumor MCF-7 cells, with the exception of Zn(II complex-containing a symmetrical ligand. Accordingly, preliminary in vitro data suggest that the proposed tetrapyrrolic compounds are good candidates for PDT, as they limit tumor expansion even under dark conditions, whilst sparing normal cells.

  7. Model selection for amplitude analysis

    CERN Document Server

    Guegan, Baptiste; Stevens, Justin; Williams, Mike

    2015-01-01

    Model complexity in amplitude analyses is often a priori under-constrained since the underlying theory permits a large number of amplitudes to contribute to most physical processes. The use of an overly complex model results in reduced predictive power and worse resolution on unknown parameters of interest. Therefore, it is common to reduce the complexity by removing from consideration some subset of the allowed amplitudes. This paper studies a data-driven method for limiting model complexity through regularization during regression in the context of a multivariate (Dalitz-plot) analysis. The regularization technique applied greatly improves the performance. A method is also proposed for obtaining the significance of a resonance in a multivariate amplitude analysis.

  8. Comprehensive Radar Observations of Clouds and Precipitation over the Tibetan Plateau and Preliminary Analysis of Cloud Properties

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    ), and updrafts and downdrafts coexisted in the convective system. Supercooled water might exist in such kinds of deep convective system. The above measurements and preliminary analysis provide a basis for further study of cloud physics and precipitation process over the Tibetan Plateau. These observations are also valuable for modeling studies of cloud and precipitation physics as well as in the development of parameterization schemes in numerical prediction models.

  9. Hayabusa Recovery, Curation and Preliminary Sample Analysis: Lessons Learned from Recent Sample Return Mission

    Science.gov (United States)

    Zolensky, Michael E.

    2011-01-01

    analytical activities before settling on a database design - Hayabusa has done a better job of this. Also, analysis teams must not be permitted to devise their own sample naming schemes. The sample handling and storage facilities for Hayabusa are the finest that exist, and we are now modifying Stardust curation to take advantage of the Hayabusa facilities. Remote storage of a sample subset is desirable. Preliminary Examination (PE) of Samples: There must be some determination of the state and quantity of the returned samples, to provide a necessary guide to persons requesting samples and oversight committees tasked with sample curation oversight. Hayabusa s sample PE, which is called HASPET, was designed so that late additions to the analysis protocols were possible, as new analytical techniques became available. A small but representative number of recovered grains are being subjected to in-depth characterization. The bulk of the recovered samples are being left untouched, to limit contamination. The HASPET plan takes maximum advantage of the unique strengths of sample return missions

  10. Accelerated life models modeling and statistical analysis

    CERN Document Server

    Bagdonavicius, Vilijandas

    2001-01-01

    Failure Time DistributionsIntroductionParametric Classes of Failure Time DistributionsAccelerated Life ModelsIntroductionGeneralized Sedyakin's ModelAccelerated Failure Time ModelProportional Hazards ModelGeneralized Proportional Hazards ModelsGeneralized Additive and Additive-Multiplicative Hazards ModelsChanging Shape and Scale ModelsGeneralizationsModels Including Switch-Up and Cycling EffectsHeredity HypothesisSummaryAccelerated Degradation ModelsIntroductionDegradation ModelsModeling the Influence of Explanatory Varia

  11. [Individualized three-dimensional finite element model of facial soft tissue and preliminary application in orthodontics].

    Science.gov (United States)

    Chen, Si; Xu, Tian-min; Lou, Hang-di; Rong, Qi-guo

    2012-12-01

    To get individualized facial three-dimensional finite element (FE) model from transformation of a generic one to assist orthodontic analysis and prediction of treatment-related morphological change of facial soft tissue. A generic three-dimensional FE model of craniofacial soft and hard tissue was constructed based on a volunteer's spiral CT data. Seven pairs of main peri-oral muscles were constructed based on a combination of CT image and anatomical method. Individualized model could be obtained through transformation of the generic model based on selection of corresponding anatomical landmarks and radial basis functions (RBF) method. Validation was analyzed through superimposition of the transformed model and cone-beam CT (CBCT) reconstruction data. Pre- and post-treatment CBCT data of two patients were collected, which were superimposed to gain the amount of anterior teeth retraction and anterior alveolar surface remodeling that could be used as boundary condition. Different values of Poisson ratio ν and Young's modulus E were tested during simulation. Average deviation was 0.47 mm and 0.75 mm in the soft and hard tissue respectively. It could be decreased to a range of +0.29 mm and -0.21 mm after a second transformation at the lip-mouth region. The best correspondence between simulation and post-treatment result was found with elastic properties of soft tissues defined as follows. Poisson ratio ν for skin, muscle and fat being set as 0.45 while Young's modulus being set as 90.0 kPa, 6.2 kPa and 2.0 kPa respectively. Individualized three-dimensional facial FE model could be obtained through mathematical model transformation. With boundary condition defined according to treatment plan such FE model could be used to analyze the effect of orthodontic treatment on facial soft tissue.

  12. Central receiver solar thermal power system. Phase 1. CDRL item 2; Pilot Plant preliminary design report. Volume II. System decription and system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hallet, Jr., R. W.; Gervais, R. L.

    1977-10-01

    An active system analysis and integration effort has been maintained. These activities have included the transformation of initial program requirements into a preliminary system design, the evolution of subsystem requirements which lay the foundation for subsystem design and test activity, and the overseeing of the final preliminary design effort to ensure that the subsystems are operationally compatible and capable of producing electricity at the lowest possible cost per unit of energy. Volume II of the Preliminary Design Report presents the results of the overall system effort that went on during this contract. The effort is assumed to include not only the total system definition and design but also all subsystem interactions.

  13. Can anodised zirconium implants stimulate bone formation? Preliminary study in rat model

    OpenAIRE

    Katunar, Maria Rosa; Gomez Sanchez, Andrea Valeria; Ballarre, Josefina; Baca, Matías; Vottola, Carlos; Orellano, Juan C.; Schell, Hanna; Duffo, Gustavo Sergio; Cere, Silvia

    2014-01-01

    Mechanical properties and good biocompatibility of zirconium and some of its alloys focus these materials as good candidates for biomedical applications. The attractive in vivo performance of zirconium is mainly due to the presence of a protective oxide layer. In this preliminary study, surface modification of pure zirconium was made by anodisation in acidic media at low potentials, enhancing the barrier protection given by the oxides and the osseointegration. Electrochemical and SEM (scan...

  14. A Combination of Preliminary Electroweak Measurements and Constraints on the Standard Model, 2004

    CERN Document Server

    Abbaneo, D; Antilogus, P; Bajo-Vaquero, A; Bambade, P; Barberio, E; Blondel, A; Bourilkov, D; Checchia, P; Chierici, R; Clare, R; D'Hondt, J; De Groot, N; de la Cruz, B; de Jong, P; Della Ricca, G; Dierckxsens, M; Duchesneau, D; Duckeck, G; Elsing, M; Grünewald, M W; Gurtu, A; Hansen, J B; Hawkings, R; Holt, J; Jézéquel, S; Jones, R W L; Kawamoto, T; Kjaer, N J; Lançon, E; Liebig, W; Malgeri, L; Martínez, M; Mele, S; Migliore, E; Minard, M N; Mönig, K; Parkes, C; Parzefall, U; Pepé-Altarelli, M; Pietrzyk, B; Quast, G; Renton, P B; Riemann, S; Rowson, P C; Ruiz, H; Sachs, K; Schumm, B; Strässner, A; Strom, D; Su, D; Tenchini, R; Teubert, F; Thomson, M A; Todorova-Nová, S; Tournefier, E; Valassi, A; Venturi, A; Voss, H; Ward, C P; Watson, N K; Wells, P S; Wynhoff, St

    2004-01-01

    This note presents a combination of published and preliminary electroweak results from the four LEP collaborations and the SLD collaboration which were prepared for the 2004 summer conferences. The main changes with respect to the experimental results presented in summer 2003 are updates to the W branching fractions and four-fermion cross sections measured at LEP-2, and the SLD/LEP heavy-flavour results measured at the Z pole.

  15. Preliminary environmental analysis of a geopressured-geothermal test well in Brazoria County, Texas

    Energy Technology Data Exchange (ETDEWEB)

    White, W.A.; McGraw, M.; Gustavson, T.C.; Meriwether, J.

    1977-11-16

    Preliminary environmental data, including current land use, substrate lithology, soils, natural hazards, water resources, biological assemblages, meteorological data, and regulatory considerations have been collected and analyzed for approximately 150 km/sup 2/ of land near Chocolate Bayou, Brazoria County, Texas, in which a geopressured-geothermal test well is to be drilled in the fall of 1977. The study was designed to establish an environmental data base and to determine, within spatial constraints set by subsurface reservoir conditions, environmentally suitable sites for the proposed well. Preliminary analyses of data revealed the eed for focusing on the following areas: potential for subsidence and fault activation, susceptibility of test well and support facilities to fresh- and salt-water flooding, possible effects of produced saline waters on biological assemblages and groundwaer resources, distribution of expansive soils, and effect of drilling and associated support activities on known archeological-cultural resources.

  16. Preliminary results from fault-slip analysis of the Pärvie postglacial fault zone

    Science.gov (United States)

    Baeckstroem, A.; Rantakokko, N.; Jonsson, E.; Ask, M. V.

    2012-12-01

    We aim at constraining the paleostress field of a special type of intraplate faulting, triggered by the retreat of continental glaciers along the longest known post-glacial fault (PGF), the Pärvie PGF. It is 155 km long and consists of a series of 3-10 m high fault scarps; most of them west-facing and north-northeast trending. The fault displaces postglacial sediments (Lagerbäck 1979). The displacement is interpreted to have been caused by a great earthquake (M≤8.2; Arvidson 1996) at the end or just after the last glaciation (~10 ky B.P.). The fault zone is still active on the microseismic scale; however, the regional stress field is yet relatively poorly constrained (Lindblom 2011). The PGFs in North Fennoscandia may have formed in the Precambrian (e.g. Olesen et al. 1992). Nevertheless, the stress history of the Pärvie PGF before the last glaciation is poorly known. To reconstruct its stress history, we have performed fault-slip analysis of fault slip data that reactivated the fault. We have collected fault slip data from a profile of outcrops across the Pärvie PGF in the valley wall in the Corruvagge valley in northern Sweden. Cross-cutting relationships, fracture mineralization and brittle behavior of the rock have been used to unravel the brittle history of the fault. At least three paleostress regimes have been identified. Preliminary results indicate that early formed brittle structures where the fracture filling minerals are dominated by amphibole and plagioclase were subjected to a strike-slip stress regime with a small component of extension. The two relatively younger stages of the brittle development of this structure can be related to a compressive respectively an extensional stress-field. The mineral assemblage in the two later brittle deformations is dominated by epidote. Several fractures from the younger stages are cross-cutting and displacing the older events. The mineral assemblages related to the younger stages show several fault

  17. Crystallization and preliminary X-ray diffraction analysis of HML, a lectin from the red marine alga Hypnea musciformis

    Energy Technology Data Exchange (ETDEWEB)

    Nagano, Celso S.; Gallego del Sol, Francisca [Instituto de Biomedicina de Valencia, CSIC, Valencia (Spain); Cavada, Benildo S.; Nascimento, Kyria Santiago Do [Departamento de Bioquímica e Biologia Molecular, Universidade Federal do Ceará, Fortaleza, CE 60451-970 (Brazil); Nunes, Eudismar Vale; Sampaio, Alexandre H. [Laboratorio de Bioquímica Marinha, Departamento de Engenharia de Pesca, Universidade Federal do Ceará, Fortaleza, CE 60451-970 (Brazil); Calvete, Juan J., E-mail: jcalvete@ibv.csic.es [Instituto de Biomedicina de Valencia, CSIC, Valencia (Spain)

    2005-11-01

    The crystallization and preliminary X-ray diffraction analysis of a red marine alga lectin isolated from H. musciformis is reported. HML, a lectin from the red marine alga Hypnea musciformis, defines a novel lectin family. Orthorhombic crystals of HML belonging to space group P2{sub 1}2{sub 1}2{sub 1} grew within three weeks at 293 K using the hanging-drop vapour-diffusion method. A complete data set was collected at 2.4 Å resolution. HML is the first marine alga lectin to be crystallized.

  18. Test for Nonlinear Input Output Relations in SISO Systems by Preliminary Data Analysis

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...... are developed. They are much more robust, especially the sinus method which is reliable also for colored, heavy tailed or skew distributed noise....

  19. Economic modeling and sensitivity analysis.

    Science.gov (United States)

    Hay, J W

    1998-09-01

    The field of pharmacoeconomics (PE) faces serious concerns of research credibility and bias. The failure of researchers to reproduce similar results in similar settings, the inappropriate use of clinical data in economic models, the lack of transparency, and the inability of readers to make meaningful comparisons across published studies have greatly contributed to skepticism about the validity, reliability, and relevance of these studies to healthcare decision-makers. Using a case study in the field of lipid PE, two suggestions are presented for generally applicable reporting standards that will improve the credibility of PE. Health economists and researchers should be expected to provide either the software used to create their PE model or a multivariate sensitivity analysis of their PE model. Software distribution would allow other users to validate the assumptions and calculations of a particular model and apply it to their own circumstances. Multivariate sensitivity analysis can also be used to present results in a consistent and meaningful way that will facilitate comparisons across the PE literature. Using these methods, broader acceptance and application of PE results by policy-makers would become possible. To reduce the uncertainty about what is being accomplished with PE studies, it is recommended that these guidelines become requirements of both scientific journals and healthcare plan decision-makers. The standardization of economic modeling in this manner will increase the acceptability of pharmacoeconomics as a practical, real-world science.

  20. Preliminary Assessment of Mercury Atmosphere-Surface Exchange Parameterizations for Incorporation into Chemical Transport Models

    Science.gov (United States)

    Khan, T.; Agnan, Y.; Obrist, D.; Selin, N. E.; Urban, N. R.; Wu, S.; Perlinger, J. A.

    2015-12-01

    Inadequate representation of process-based mechanisms of exchange behavior of elemental mercury (Hg0) and decoupled treatment of deposition and emission are two major limitations of parameterizations of atmosphere-surface exchange flux commonly incorporated into chemical transport models (CTMs). Of nineteen CTMs for Hg0 exchange we reviewed (ten global, nine regional), eight global and seven regional models have decoupled treatment of Hg0 deposition and emission, two global models include no parameterization to account for emission, and the remaining two regional models include coupled deposition and emission parameterizations (i.e., net atmosphere-surface exchange). The performance of atmosphere-surface exchange parameterizations in CTMs depends on parameterization uncertainty (in terms of both accuracy and precision) and feasibility of implementation. We provide a comparison of the performance of three available parameterizations of net atmosphere-surface exchange. To evaluate parameterization accuracy, we compare predicted exchange fluxes to field measurements conducted over a variety of surfaces compiled in a recently developed global database of terrestrial Hg0 surface-atmosphere exchange flux measurements. To assess precision, we estimate the sensitivity of predicted fluxes to the imprecision in parameter input values, and compare this sensitivity to that derived from analysis of the global Hg0 flux database. Feasibility of implementation is evaluated according to the availability of input parameters, computational requirements, and the adequacy of uncertainty representation. Based on this assessment, we provide suggestions for improved treatment of Hg0 net exchange processes in CTMs.

  1. Preliminary Analysis of a Water Shield for a Surface Power Reactor

    Science.gov (United States)

    Pearson, J. Boise

    2006-01-01

    A water based shielding system is being investigated for use on initial lunar surface power systems. The use of water may lower overall cost (as compared to development cost for other materials) and simplify operations in the setup and handling. The thermal hydraulic performance of the shield is of significant interest. The mechanism for transferring heat through the shield is natural convection. A simple 1-D thermal model indicates the necessity of natural convection to maintain acceptable temperatures and pressures in the water shield. CFD analysis is done to quantify the natural convection in the shield, and predicts sufficient natural convection to transfer heat through the shield with small temperature gradients. A test program will he designed to experimentally verify the thermal hydraulic performance of the shield, and to anchor the CFD models to experimental results.

  2. Timing analysis by model checking

    Science.gov (United States)

    Naydich, Dimitri; Guaspari, David

    2000-01-01

    The safety of modern avionics relies on high integrity software that can be verified to meet hard real-time requirements. The limits of verification technology therefore determine acceptable engineering practice. To simplify verification problems, safety-critical systems are commonly implemented under the severe constraints of a cyclic executive, which make design an expensive trial-and-error process highly intolerant of change. Important advances in analysis techniques, such as rate monotonic analysis (RMA), have provided a theoretical and practical basis for easing these onerous restrictions. But RMA and its kindred have two limitations: they apply only to verifying the requirement of schedulability (that tasks meet their deadlines) and they cannot be applied to many common programming paradigms. We address both these limitations by applying model checking, a technique with successful industrial applications in hardware design. Model checking algorithms analyze finite state machines, either by explicit state enumeration or by symbolic manipulation. Since quantitative timing properties involve a potentially unbounded state variable (a clock), our first problem is to construct a finite approximation that is conservative for the properties being analyzed-if the approximation satisfies the properties of interest, so does the infinite model. To reduce the potential for state space explosion we must further optimize this finite model. Experiments with some simple optimizations have yielded a hundred-fold efficiency improvement over published techniques.

  3. PRELIMINARY ANALYSIS OF THE EARTHQUAKE (MW 8.1 AND TSUNAMI OF APRIL 1, 2007, IN THE SOLOMON ISLANDS, SOUTHWESTERN PACIFIC OCEAN

    Directory of Open Access Journals (Sweden)

    Michael A. Fisher

    2007-01-01

    Full Text Available On April 1, 2007, a destructive earthquake (Mw 8.1 and tsunami struck the central Solomon Islands arc in the southwestern Pacific Ocean. The earthquake had a thrust-fault focal mechanism and occurred at shallow depth (between 15 km and 25 km beneath the island arc. The combined effects of the earthquake and tsunami caused dozens of fatalities and thousands remain without shelter. We present a preliminary analysis of the Mw-8.1 earthquake and resulting tsunami. Multichannel seismic- reflection data collected during 1984 show the geologic structure of the arc’s frontal prism within the earthquake’s rupture zone. Modeling tsunami-wave propagation indicates that some of the islands are so close to the earthquake epicenter that they were hard hit by tsunami waves as soon as 5 min. after shaking began, allowing people scant time to react.

  4. Hip fracture risk estimation based on principal component analysis of QCT atlas: a preliminary study

    Science.gov (United States)

    Li, Wenjun; Kornak, John; Harris, Tamara; Lu, Ying; Cheng, Xiaoguang; Lang, Thomas

    2009-02-01

    We aim to capture and apply 3-dimensional bone fragility features for fracture risk estimation. Using inter-subject image registration, we constructed a hip QCT atlas comprising 37 patients with hip fractures and 38 age-matched controls. In the hip atlas space, we performed principal component analysis to identify the principal components (eigen images) that showed association with hip fracture. To develop and test a hip fracture risk model based on the principal components, we randomly divided the 75 QCT scans into two groups, one serving as the training set and the other as the test set. We applied this model to estimate a fracture risk index for each test subject, and used the fracture risk indices to discriminate the fracture patients and controls. To evaluate the fracture discrimination efficacy, we performed ROC analysis and calculated the AUC (area under curve). When using the first group as the training group and the second as the test group, the AUC was 0.880, compared to conventional fracture risk estimation methods based on bone densitometry, which had AUC values ranging between 0.782 and 0.871. When using the second group as the training group, the AUC was 0.839, compared to densitometric methods with AUC values ranging between 0.767 and 0.807. Our results demonstrate that principal components derived from hip QCT atlas are associated with hip fracture. Use of such features may provide new quantitative measures of interest to osteoporosis.

  5. Preliminary Analysis of an Oscillating Surge Wave Energy Converter with Controlled Geometry: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Tom, Nathan; Lawson, Michael; Yu, Yi-Hsiang; Wright, Alan

    2015-09-09

    The aim of this paper is to present a novel wave energy converter device concept that is being developed at the National Renewable Energy Laboratory. The proposed concept combines an oscillating surge wave energy converter with active control surfaces. These active control surfaces allow for the device geometry to be altered, which leads to changes in the hydrodynamic properties. The device geometry will be controlled on a sea state time scale and combined with wave-to-wave power-take-off control to maximize power capture, increase capacity factor, and reduce design loads. The paper begins with a traditional linear frequency domain analysis of the device performance. Performance sensitivity to foil pitch angle, the number of activated foils, and foil cross section geometry is presented to illustrate the current design decisions; however, it is understood from previous studies that modeling of current oscillating wave energy converter designs requires the consideration of nonlinear hydrodynamics and viscous drag forces. In response, a nonlinear model is presented that highlights the shortcomings of the linear frequency domain analysis and increases the precision in predicted performance.

  6. Data science education: a preliminary analysis of the U.S landscape

    Directory of Open Access Journals (Sweden)

    Renata Gonçalves Curty

    2016-08-01

    Full Text Available Introduction: Data scientists has received great attention in recent years following the demands of the labor market stimulated by the open science and big data era. Originally widespread in 2008 and, since then, present in many different industries and applications; data science was announced in 2012 as the most attractive and one of the best paid jobs of the century, culminating with an increasing supply of training courses. Objective: Characterize and understand the formative aspects of data scientists. Methodology: This article describes part of a survey research based on analysis of 93 degrees in data science offered by US institutions. Results: The content analysis of the information publicized on the websites of the identified programs provides evidence that this professional is trained to deal with issues related to the collection, treatment, processing, analysis, visualization and curation of large and heterogeneous data collections in order to solving real-life and practical problems. Conclusion: Findings also revealed that, in general, training in science data places great emphasis on statistical skills, mathematics and computing, including programming and advanced modeling, many of which are placed as prerequisites for admission in these programs.

  7. A Preliminary Analysis on Empirical Attenuation of Absolute Velocity Response Spectra (1 to 10s) in Japan

    Science.gov (United States)

    Dhakal, Y. P.; Kunugi, T.; Suzuki, W.; Aoi, S.

    2013-12-01

    The Mw 9.1 Tohoku-oki earthquake caused strong shakings of super high rise and high rise buildings constructed on deep sedimentary basins in Japan. Many people felt difficulty in moving inside the high rise buildings even on the Osaka basin located at distances as far as 800 km from the epicentral area. Several empirical equations are proposed to estimate the peak ground motions and absolute acceleration response spectra applicable mainly within 300 to 500km from the source area. On the other hand, Japan Meteorological Agency has recently proposed four classes of absolute velocity response spectra as suitable indices to qualitatively describe the intensity of long-period ground motions based on the observed earthquake records, human experiences, and actual damages that occurred in the high rise and super high rise buildings. The empirical prediction equations have been used in disaster mitigation planning as well as earthquake early warning. In this study, we discuss the results of our preliminary analysis on attenuation relation of absolute velocity response spectra calculated from the observed strong motion records including those from the Mw 9.1 Tohoku-oki earthquake using simple regression models with various model parameters. We used earthquakes, having Mw 6.5 or greater, and focal depths shallower than 50km, which occurred in and around Japanese archipelago. We selected those earthquakes for which the good quality records are available over 50 observation sites combined from K-NET and KiK-net. After a visual inspection on approximately 21,000 three component records from 36 earthquakes, we used about 15,000 good quality records in the period range of 1 to 10s within the hypocentral distance (R) of 800km. We performed regression analyses assuming the following five regression models. (1) log10Y (T) = c+ aMw - log10R - bR (2) log10Y (T) = c+ aMw - log10R - bR +gS (3) log10Y (T) = c+ aMw - log10R - bR + hD (4) log10Y (T) = c+ aMw - log10R - bR +gS +hD (5) log10Y

  8. Modeling the Capacity and Emissions Impacts of Reduced Electricity Demand. Part 1. Methodology and Preliminary Results

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, Katie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shen, Hongxia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Chan, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; McDevitt, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Sturges, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2013-02-07

    Policies aimed at energy conservation and efficiency have broad environmental and economic impacts. Even if these impacts are relatively small, they may be significant compared to the cost of implementing the policy. Methodologies that quantify the marginal impacts of reduced demand for energy have an important role to play in developing accurate measures of both the benefits and costs of a given policy choice. This report presents a methodology for estimating the impacts of reduced demand for electricity on the electric power sector as a whole. The approach uses the National Energy Modeling System (NEMS), a mid-range energy forecast model developed and maintained by the U.S. Department of Energy, Energy Information Administration (EIA)(DOE EIA 2013). The report is organized as follows: In the rest of this section the traditional NEMS-BT approach is reviewed and an outline of the new reduced form NEMS methodology is presented. Section 2 provides an overview of how the NEMS model works, and describes the set of NEMS-BT runs that are used as input to the reduced form approach. Section 3 presents our NEMS-BT simulation results and post-processing methods. In Section 4 we show how the NEMS-BT output can be generalized to apply to a broader set of end-uses. In Section 5 we disuss the application of this approach to policy analysis, and summarize some of the issues that will be further investigated in Part 2 of this study.

  9. Perovskite sensing materials for syngas composition monitoring and biomass gasifier numerical model validation: A preliminary approach

    Science.gov (United States)

    Pallozzi, V.; Di Carlo, A.; Zaza, F.; Villarini, M.; Carlini, M.; Bocci, E.

    2016-06-01

    Biomass gasification represents a suitable choice for global environmental impact reduction, but more efforts on the process efficiency need to be conducted in order to enhance the use of this technology. Studies on inputs and outputs of the process, as well as measurements and controls of syngas composition and correlated organic and inorganic impurities, are crucial points for the optimization of the entire process: models of the system and sensing devices are, thus, very attractive for this purpose. In particular, perovskite based chemoresistive sensors could represent a promising technology, since their simplicity in function, relatively low cost and direct high temperature operation. The aim of this work is to develop a steam fluidized bed biomass gasifier model, for the prediction of the process gas composition, and new perovskite compounds, LaFeO3 based, as sensing material of chemoresistive sensors for syngas composition and impurities measurements. Chemometric analysis on the combustion synthesis via citrate-nitrate technique of LaFeO3 was also performed, in order to evaluate the relationship between synthesis conditions and perovskite materials and, thus, sensor properties. Performance of different sensors will be tested, in next works, with the support of the developed gasifier model.

  10. Purification, crystallization and preliminary crystallographic analysis of KatB, a manganese catalase from Anabaena PCC 7120.

    Science.gov (United States)

    Bihani, Subhash Chandra; Chakravarty, Dhiman; Ballal, Anand

    2013-11-01

    Catalases are enzymes that play an important role in the detoxification of hydrogen peroxide (H2O2) in aerobic organisms. Among catalases, haem-containing catalases are ubiquitously distributed and their enzymatic mechanism is very well understood. On the other hand, manganese catalases that contain a bimanganese core in the active site have been less well characterized and their mode of action is not fully understood. The genome of Anabaena PCC 7120 does not show the presence of a haem catalase-like gene; instead, two ORFs encoding manganese catalases (Mn-catalases) are present. Here, the crystallization and preliminary X-ray crystallographic analysis of KatB, one of the two Mn-catalases from Anabaena, are reported. KatB was crystallized using the hanging-drop vapour-diffusion method with PEG 400 as a precipitant and calcium acetate as an additive. Diffraction data were collected in-house on an Agilent SuperNova system using a microfocus sealed-tube X-ray source. The crystal diffracted to 2.2 Å resolution at 100 K. The tetragonal crystal belonged to space group P4(1)2(1)2 (or enantiomer), with unit-cell parameters a = b = 101.87, c = 138.86 Å. Preliminary X-ray diffraction analysis using the Matthews coefficient and self-rotation function suggests the presence of a trimer in the asymmetric unit.

  11. Preliminary comparisons between measurements and model calculations for the TMI venting of /sup 85/Kr

    Energy Technology Data Exchange (ETDEWEB)

    Dickerson, M.H.

    1980-08-01

    ARAC was on-line calculating hourly concentration values during the TMI-2 venting of /sup 85/Kr gas from June 28 to July 11, 1980. During this time hourly isopleths of normalized instantaneous concentration were calculated and transmitted to EPA in Middletown, PA. These isopleths were used to help locate the EPA and Penn State mobile air samplers and they were used for comparison to the EPA fixed 24 hr sampler measurements and the DOE helicopter measurements. This report summarizes preliminary comparisons for the EPA fixed samplers and the DOE helicopters.

  12. Ventilation Model and Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    V. Chipman

    2003-07-18

    This model and analysis report develops, validates, and implements a conceptual model for heat transfer in and around a ventilated emplacement drift. This conceptual model includes thermal radiation between the waste package and the drift wall, convection from the waste package and drift wall surfaces into the flowing air, and conduction in the surrounding host rock. These heat transfer processes are coupled and vary both temporally and spatially, so numerical and analytical methods are used to implement the mathematical equations which describe the conceptual model. These numerical and analytical methods predict the transient response of the system, at the drift scale, in terms of spatially varying temperatures and ventilation efficiencies. The ventilation efficiency describes the effectiveness of the ventilation process in removing radionuclide decay heat from the drift environment. An alternative conceptual model is also developed which evaluates the influence of water and water vapor mass transport on the ventilation efficiency. These effects are described using analytical methods which bound the contribution of latent heat to the system, quantify the effects of varying degrees of host rock saturation (and hence host rock thermal conductivity) on the ventilation efficiency, and evaluate the effects of vapor and enhanced vapor diffusion on the host rock thermal conductivity.

  13. Health Canada and the pharmaceutical industry: a preliminary analysis of the historical relationship.

    Science.gov (United States)

    Lexchin, Joel

    2013-11-01

    In the past two decades, Health Canada has been accused of favouring the pharmaceutical industry over the public in areas of pharmaceutical policy. This orientation has been tied to the introduction of user fees by the industry in 1994 that help finance key aspects of drug regulation. This paper provides a preliminary examination of the history of the relationship starting in 1939 until the mid-1980s in an attempt to discern whether 1994 really represented a key turning point. Clientele pluralism, a theory that explains the relationship between the state and interest groups, is used to explain the nature of the events described. Copyright © 2013 Longwoods Publishing.

  14. Energy efficient engine flight propulsion system preliminary analysis and design report

    Science.gov (United States)

    Gardner, W. B.

    1979-01-01

    A flight propulsion system preliminary design was established that meets the program goals of at least a 12 percent reduction in thrust specific fuel consumption, at least a five percent reduction in direct operating cost, and one-half the performance deterioration rate of the most efficient current commercial engines. The engine provides a high probability of meeting the 1978 noise rule goal. Smoke and gaseous emissions defined by the EPA proposed standards for engines newly certified after 1 January 1981 are met with the exception of NOx, despite incorporation of all known NOx reduction technology.

  15. Preliminary application of turn-by-turn data analysis to the SSRF storage ring

    Institute of Scientific and Technical Information of China (English)

    CHEN Jian-Hui; ZHAO Zhen-Tang

    2009-01-01

    There is growing interest in utilizing the beam position monitor turn-by-turn (TBT) data to debug accelerators. TBT data can be used to determine the linear optics, coupled optics and nonlinear behaviors of the storage ring lattice. This is not only a useful complement to other methods of determining the linear optics such as LOCO, but also provides a possibility to uncover more hidden phenomena. In this paper, a preliminary application of a β function measurement to the SSRF storage ring is presented.

  16. An Eddy-Permitting Oceanic General Circulation Model and Its Preliminary Evaluation

    Institute of Scientific and Technical Information of China (English)

    刘海龙; 张学洪; 李薇; 俞永强; 宇如聪

    2004-01-01

    An eddy-permitting, quasi-global oceanic general circulation model, LICOM (LASG/IAP (State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics) Climate System Ocean Model), with a uniform grid of 0.5°× 0.5° is established.Forced by wind stresses from Hellerman and Rosenstain (1983), a 40-yr integration is conducted with sea surface temperature and salinity being restored to the Levitus 94 datasets. The evaluation of the annual mean climatology of the LICOM control run shows that the large-scale circulation can be well reproduced. A comparison between the LICOM control run and a parallel integration of L30T63, which has the same framework but a coarse resolution, is also made to confirm the impact of resolution on the model performance. On account of the reduction of horizontal viscosity with the enhancement of the horizontal resolution, LICOM improves the simulation with respect to not only the intensity of the large scale circulations, but also the magnitude and structureof the Equatorial Undercurrent and South Equatorial Current. Taking advantage of the fine grid size, the pathway of the Indonesian Throughflow (ITF) is better represented in LICOM than in L30T63. The transport of ITF in LICOM is more convergent in the upper layer. As a consequence, the Indian Ocean tends to get warmer in LICOM. The poleward heat transports for both the global and individual basins are also significantly improved in LICOM. A decomposed analysis indicates that the transport due to the barotropic gyre, which primarily stands for the barotropic effect of the western boundary currents, plays a crucial role in making the difference.

  17. A Combination of Preliminary Electroweak Measurements and Constraints on the Standard Model, 2006

    CERN Document Server

    Alcaraz, J; Bajo-Vaquero, A; Barberio, E; Blondel, A; Bourilkov, D; Checchia, P; Chierici, R; Clare, R; D'Hondt, J; Della Ricca, G; Dierckxsens, M; Duchesneau, D; Duckeck, G; Elsing, M; Grünewald, M W; Gurtu, A; Hansen, J B; Hawkings, R; Jezequel, St; Jones, R W L; Kawamoto, T; Lançon, E; Liebig, W; Malgeri, L; Mele, S; Minard, M N; Mönig, K; Parkes, C; Parzefall, U; Pietrzyk, B; Quast, G; Renton, P B; Riemann, S; Sachs, K; Strom, D; Strässner, A; Tenchini, R; Teubert, F; Thomson, M A; Todorova-Nová, S; Valassi, A; Venturi, A; Voss, H; Ward, C P; Watson, N K; Wells, P S; Wynhoff, St; de Jong, P; de la Cruz, B

    2006-01-01

    This note presents a combination of published and preliminary electroweak results from the four LEP collaborations ALEPH, DELPHI, L3 and OPAL based on electron-positron collision data taken at centre-of-mass energies above the Z-pole, 130 GeV to 209 GeV (LEP-II), as prepared for the 2006 summer conferences. Averages are derived for di-fermion cross sections and forward-backward asymmetries, photon-pair, W-pair, Z-pair, single-W and single-Z cross sections, electroweak gauge boson couplings, W mass and width and W decay branching ratios. An investigation of the interference of photon and Z-boson exchange is presented, and colour reconnection and Bose-Einstein correlation analyses in W-pair production are combined. The main changes with respect to the experimental results presented in 2005 are new preliminary combinations of final LEP-II results on the mass and width of the W boson. Including the precision electroweak measurements performed at the Z pole published recently, the results are compared with precise...

  18. A Combination of Preliminary Electroweak Measurements and Constraints on the Standard Model, 2005

    CERN Document Server

    Alcaraz, J; Bambade, P; Barberio, E; Blondel, A; Bourilkov, D; Checchia, P; Chierici, R; Clare, R; D'Hondt, J; de la Cruz, B; de Jong, P; Della Ricca, G; Dierckxsens, M; Duchesneau, D; Duckeck, G; Elsing, M; Grünewald, M W; Gurtu, A; Hansen, J B; Hawkings, R; Jézéquel, S; Jones, R W L; Kawamoto, T; Lançon, E; Liebig, W; Malgeri, L; Mele, S; Migliore, E; Minard, M N; Mönig, K; Parkes, C; Parzefall, U; Pietrzyk, B; Quast, G; Renton, P B; Riemann, S; Sachs, K; Strässner, A; Strom, D; Tenchini, R; Teubert, F; Thomson, M A; Todorova-Nová, S; Valassi, A; Venturi, A; Voss, H; Ward, C P; Watson, N K; Wells, P S; Wynhoff, St

    2005-01-01

    This note presents a combination of published and preliminary electroweak results from the four LEP collaborations ALEPH, DELPHI, L3 and OPAL based on electron-positron collision data taken at centre-of-mass energies above the Z-pole, $130 \\GeV$ to $209 \\GeV$ (\\LEPII), as prepared for the 2005 summer conferences. Averages are derived for di-fermion cross sections and forward-backward asymmetries, photon-pair, W-pair, Z-pair, single-W and single-Z cross sections, electroweak gauge boson couplings, W mass and width and W decay branching ratios. An investigation of the interference of photon and Z-boson exchange is presented, and colour reconnection and Bose-Einstein correlation analyses in W-pair production are combined. The main changes with respect to the experimental results presented in 2004 are updates to some 4-fermion cross sections, final results on BE correlations and a new preliminary combination of the mass and width of the W boson. Including the precision electroweak measurements performed at the Z ...

  19. Preliminary results from the ESA STSE project on SST diurnal variability, its regional extent and implications in atmospheric modelling (SSTDV:R.EX.–IM.A.M.)

    DEFF Research Database (Denmark)

    Karagali, Ioanna; Hasager, Charlotte Bay; Høyer, Jacob L.

    2013-01-01

    This study presents some preliminary results of the ESA Support To Science Element (STSE) funded project on the Diurnal Variability of the Sea Surface Temperature, regarding its Regional Extend and Implications in Atmospheric Modelling (SSTDV:R.EX.–IM.A.M.). Comparisons of SEVIRI SST with AATSR......, the 1-dimensional General Ocean Turbulence Model (GOTM) is applied. Preliminary results show that the initial temperature and salinity profiles may give a warmer start-up in the model while the light extinction scheme is a controlling factor for the amplitude and vertical extend of the daily signal....

  20. ANALYSIS MODEL FOR INVENTORY MANAGEMENT

    Directory of Open Access Journals (Sweden)

    CAMELIA BURJA

    2010-01-01

    Full Text Available The inventory represents an essential component for the assets of the enterprise and the economic analysis gives them special importance because their accurate management determines the achievement of the activity object and the financial results. The efficient management of inventory requires ensuring an optimum level for them, which will guarantee the normal functioning of the activity with minimum inventory expenses and funds which are immobilised. The paper presents an analysis model for inventory management based on their rotation speed and the correlation with the sales volume illustrated in an adequate study. The highlighting of the influence factors on the efficient inventory management ensures the useful information needed to justify managerial decisions, which will lead to a balancedfinancial position and to increased company performance.

  1. Bayesian modeling in conjoint analysis

    Directory of Open Access Journals (Sweden)

    Janković-Milić Vesna

    2010-01-01

    Full Text Available Statistical analysis in marketing is largely influenced by the availability of various types of data. There is sudden increase in the number and types of information available to market researchers in the last decade. In such conditions, traditional statistical methods have limited ability to solve problems related to the expression of market uncertainty. The aim of this paper is to highlight the advantages of bayesian inference, as an alternative approach to classical inference. Multivariate statistic methods offer extremely powerful tools to achieve many goals of marketing research. One of these methods is the conjoint analysis, which provides a quantitative measure of the relative importance of product or service attributes in relation to the other attribute. The application of this method involves interviewing consumers, where they express their preferences, and statistical analysis provides numerical indicators of each attribute utility. One of the main objections to the method of discrete choice in the conjoint analysis is to use this method to estimate the utility only at the aggregate level and by expressing the average utility for all respondents in the survey. Application of hierarchical Bayesian models enables capturing of individual utility ratings for each attribute level.

  2. Analysis of Design Basis Events in a Preliminary Specific Design of PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwi Lim; Ha, Kwi Seok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    KAERI(Korea Atomic Energy Research Institute) has been developing a preliminary specific design of the PGSFR(Prototype Gen-IV Sodium-cooled Fast Reactor), which is a pool type sodium cooled fast reactor with a thermal power of 392.2 MW. Many alterations were made on a preliminary specific design of the PGSFR compared with a conceptual design: a heat removal capability of the DHRS was decreased, the DHXs were submerged in a cold pool, a pressure drop through the core was increased, and a shape of a redon was changed to a peanut type, etc. For identification of safety characteristics including the design changes, 5 DBE's(Design Bases Events) were analyzed using MARS-LMR code. The representative DBE's are TOP(Transient of Over Power), LOF(Loss Of Flow), LOHS(Loss Of Heat Sink), Reactor Vessel Leak and Pipe Break accidents. The representative DBE's were analyzed using the MARS-LMR code. As a result, it was identified that the PGSFR were appropriately tripped by the RPS(Reactor Protection System) and cooled by the DHRS. But a high cladding temperature was estimated in a pipe break accident. Therefore, integrity of the structure should be evaluated in the further study.

  3. Raman spectroscopy and SERS analysis of ovarian tumour derived exosomes (TEXs): a preliminary study

    Science.gov (United States)

    Kerr, Laura T.; Gubbins, Luke; Weiner Gorzel, Karolina; Sharma, Shiva; Kell, Malcolm; McCann, Amanda; Hennelly, Bryan M.

    2014-05-01

    Here we report a preliminary study based on the application of Raman spectroscopy and surface enhanced Raman spectroscopy (SERS) to investigate the compositional differences between exosomes derived from ovarian carcinoma cells (cell line A2780) grown in normoxia (normal O2 conditions) and hypoxia (1% O2 conditions). Exosomes are integral to cell signalling, and are of interest in the study of how cells communicate within their environment. We are particularly interested in identifying whether hypoxia induced senescent cells can communi- cate via exosomes with neighbouring tumour cells, thereby causing them to become senescent and therefore radio and chemo resistant. With this goal in mind, we performed a preliminary study on the application of Raman spectroscopy and SERS to analyse the biomolecular fingerprint of both groups of exosomes and to investigate whether there exists a different biomolecular composition associated with exosomes derived from hypoxic cells in comparison to those from normoxic cells. We also applied multivariate statistical techniques for the classification of both groups of exosomes.

  4. Application of an aviation model of incident reporting and investigation to the neurosurgical scenario: method and preliminary data.

    Science.gov (United States)

    Ferroli, Paolo; Caldiroli, Dario; Acerbi, Francesco; Scholtze, Maurizio; Piro, Alfonso; Schiariti, Marco; Orena, Eleonora F; Castiglione, Melina; Broggi, Morgan; Perin, Alessandro; DiMeco, Francesco

    2012-11-01

    Incident reporting systems are universally recognized as important tools for quality improvement in all complex adaptive systems, including the operating room. Nevertheless, introducing a safety culture among neurosurgeons is a slow process, and few studies are available in the literature regarding the implementation of an incident reporting system within a neurosurgical department. The authors describe the institution of an aviation model of incident reporting and investigation in neurosurgery, focusing on the method they have used and presenting some preliminary results. In 2010, the Inpatient Safety On-Board project was developed through cooperation between a team of human factor and safety specialists with aviation backgrounds (DgSky team) and the general manager of the Fondazione Istituto Neurologico Carlo Besta. In 2011, after specific training in safety culture, the authors implemented an aviation-derived prototype of incident reporting within the Department of Neurosurgery. They then developed an experimental protocol to track, analyze, and categorize any near misses that happened in the operating room. This project officially started in January 2012, when a dedicated team of assessors was established. All members of the neurosurgical department were asked to report near misses on a voluntary, confidential, and protected form (Patient Incident Reporting System form, Besta Safety Management Programme). Reports were entered into an online database and analyzed by a dedicated team of assessors with the help of a facilitator, and an aviation-derived root cause analysis was performed. Since January 2012, 14 near misses were analyzed and classified. The near-miss contributing factors were mainly related to human factors (9 of 14 cases), technology (1 of 14 cases), organizational factors (3 of 14 cases), or procedural factors (1 of 14 cases). Implementing an incident reporting system is quite demanding; the process should involve all of the people who work within

  5. Preliminary analysis of radon time series before the Ml=6 Amatrice earthquake: possible implications for fluid migration

    Directory of Open Access Journals (Sweden)

    Valentina Cannelli

    2016-11-01

    Full Text Available On August 24, 2016, a Ml=6.0 earthquake occurred in Central Apennines, Italy, between the towns of Norcia and Amatrice, causing severe destruction and casualties in a wide area around the epicenter. We present a preliminary analysis of continuous radon concentration data collected from the second half of 2012 to the day after the earthquake by a long term radon monitoring station, installed at Cittareale (Rieti, Italy, about 11 km south-west of the epicenter. We combine the field data analysis with the outcome of dedicated laboratory experiments, aimed to study real time radon emission dynamics from rock samples subject to normal and shear stress loads in absence of fluid transport and migration phenomena. Our results suggest the possibility of a minor role played by phenomena related to fluid migration for the Amatrice seismic event with respect to other recent Apennine earthquakes.

  6. AS30D Model of Hepatocellular Carcinoma: Tumorigenicity and Preliminary Characterization by Imaging, Histopathology, and Immunohistochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Scott M. [Mayo Clinic, Medical Scientist Training Program (United States); Callstrom, Matthew R. [Mayo Clinic, Department of Radiology (United States); Knudsen, Bruce [Mayo Clinic, Department of Laboratory Medicine and Pathology (United States); Anderson, Jill L. [Mayo Clinic, Division of Physiology and Bioengineering (United States); Butters, Kim A.; Grande, Joseph P. [Mayo Clinic, Department of Laboratory Medicine and Pathology (United States); Roberts, Lewis R. [Mayo Clinic, Division of Gastroenterology and Hepatology (United States); Woodrum, David A., E-mail: woodrum.david@mayo.edu [Mayo Clinic, Department of Radiology (United States)

    2013-02-15

    This study was designed to determine the tumorigenicity of the AS30D HCC cell line following orthotopic injection into rat liver and preliminarily characterize the tumor model by both magnetic resonance imaging (MRI) and ultrasound (US) as well as histopathology and immunohistochemistry.MaterialsAS30D cell line in vitro proliferation was assessed by using MTT assay. Female rats (N = 5) underwent injection of the AS30D cell line into one site in the liver. Rats subsequently underwent MR imaging at days 7 and 14 to assess tumor establishment and volume. One rat underwent US of the liver at day 7. Rats were euthanized at day 7 or 14 and livers were subjected to gross, histopathologic (H and E), and immunohistochemical (CD31) analysis to assess for tumor growth and neovascularization. AS30D cell line demonstrated an in vitro doubling time of 33.2 {+-} 5.3 h. MR imaging demonstrated hyperintense T2-weighted and hypointense T1-weighted lesions with tumor induction in five of five and three of three sites at days 7 and 14, respectively. The mean (SD) tumor volume was 126.1 {+-} 36.2 mm{sup 3} at day 7 (N = 5). US of the liver demonstrated a well-circumscribed, hypoechoic mass and comparison of tumor dimensions agreed well with MRI. Analysis of H and E- and CD31-stained sections demonstrated moderate-high grade epithelial tumors with minimal tumor necrosis and evidence of diffuse intratumoral and peritumoral neovascularization by day 7. AS30D HCC cell line is tumorigenic following orthotopic injection into rat liver and can be used to generate an early vascularizing, slower-growing rat HCC tumor model.

  7. Preliminary systems-interaction results from the Digraph Matrix Analysis of the Watts Bar Nuclear Power Plant safety-injection systems

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.; Ashmore, B.C.; Champney, J.M.; Alesso, H.P.

    1983-06-01

    This report provides preliminary results generated by a Digraph Matrix Analysis (DMA) for a Systems Interaction analysis performed on the Safety Injection System of the Tennessee Valley Authority Watts Bar Nuclear Power Plant. An overview of DMA is provided along with a brief description of the computer codes used in DMA.

  8. Preliminary systems-interaction results from the Digraph Matrix Analysis of the Watts Bar Nuclear Power Plant safety-injection systems

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.; Ashmore, B.C.; Champney, J.M.; Alesso, H.P.

    1983-06-01

    This report provides preliminary results generated by a Digraph Matrix Analysis (DMA) for a Systems Interaction analysis performed on the Safety Injection System of the Tennessee Valley Authority Watts Bar Nuclear Power Plant. An overview of DMA is provided along with a brief description of the computer codes used in DMA.

  9. Distribution system modeling and analysis

    CERN Document Server

    Kersting, William H

    2002-01-01

    For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real understanding of the operating characteristics of a distribution system, engineers using the programs can easily make serious errors in their designs and operating procedures.Distribution System Modeling and Analysis helps prevent those errors. It gives re

  10. Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design

    Institute of Scientific and Technical Information of China (English)

    ZHANG Bin; CHEN Yi-Xue; WANG Wei-Jin; YANG Shou-Hai; WU Jun; YIN Wen; LIANG Tian-Jiao; JIA Xue-Jun

    2011-01-01

    The construction of China Spallation Neutron Source (CSNS) has been initiated in Dongguan,Guangdong, China.Thus a detailed radiation transport analysis of the shutter neutron beam stop is of vital importance. The analyses are performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method. The target of calculations is to optimize the neutron beamline shielding design to guarantee personal safety and minimize cost. Successful elimination of the primary ray effects via the two-dimensional uncollided flux and the first collision source methodology is also illustrated. Two-dimensional dose distribution is calculated. The dose at the end of the neutron beam line is less than 2.5μSv/h. The models have ensured that the doses received by the hall staff members are below the standard limit required.

  11. Geophysical techniques in the historical center of Venice (Italy): preliminary results from HVSR and multichannel analysis of surface waves

    Science.gov (United States)

    Trevisani, Sebastiano; Rocca, Michele; Boaga, Jacopo

    2014-05-01

    This presentation aims to outline the preliminary findings related to an extensive seismic survey conducted in the historical center of Venice, Italy. The survey was conducted via noninvasive and low-cost seismic techniques based on surface waves analysis and microtremor methods, mainly using single station horizontal to vertical spectral ratio techninques (HVSR) and multichannel analysis of surface waves in passive (ReMI) and active (MASW) configurations. The importance and the fragility of the cultural heritage of Venice, coupled with its peculiar geological and geotechnical characteristics, stress the importance of a good knowledge of its geological architecture and seismic characteristics as an opportunity to improve restoration and conservation planning. Even if Venice is located in a relatively low seismic hazard zone, a local characterization of soil resonance frequencies and surficial shear waves velocities could improve the planning of engineering interventions, furnishing important information on possible local effects related to seismic amplification and possible coupling within buildings and soil resonance frequencies. In the specific we collected more than 50 HVSR single station noise measurements and several passive and active multichannel analysis of surface waves located in the historical center. In this work we report the characteristics of the conducted seismic surveys (instrumentation, sampling geometry, etc.) and the preliminary findings of our analysis. Moreover, we discuss briefly the practical issues, mainly of logistic nature, of conducting this kind of surveys in a peculiar and crowed historical center as represented by Venice urban contest. Acknowledgments Instrumentation acquired in relation to the project co-financed by Regione Veneto, POR-CRO, FESR, 2007-2013, action 1.1.1. "Supporto ad attività di ricerca, processi e reti di innovazione e alla creazione di imprese in settori a elevato contenuto tecnologico"

  12. Preliminary Study for 3D Radon Distribution Modelling in the Room

    Energy Technology Data Exchange (ETDEWEB)

    Lee, ChoongWie; Kim, HeeReyoung [UNIST, Ulsan (Korea, Republic of)

    2016-10-15

    Radon exists in the form of noble gas, which comes from decay of {sup 238}U, becoming stable {sup 206}Pb going through 4 alpha and 4 beta decays. If this process occurred in human body after inhalation, lung could be damaged by interaction with these radiations causing lung cancer. Most radon in indoor air comes from soil (85 - 97%) through crack of the wall but it also came from wall (2 - 5%) itself in home. Due to its hazardous and unpredictable characteristic, radon became one of the concerning nuclides in indoor air. Hence, the number of survey and research about radon has been increased. Although accurate radon measurement is important to evaluate health risk, it is hard to actually achieve because radon is affected by many conditions, where its concentration can vary easily. Moreover, radon concentration can vary according to the height because of density of radon in the spatial aspect. 3D distribution modelling in the room of radon with aerodynamic features and sources variations was carried out to find average and maximum radon concentration. 3D radon distribution in the room would be find through this computational analysis and it is thought to be possible to correct measured radon concentration with spatial variation to fit the height of nose where inhalation occur. The methodological concept for 3D modelling was set up to solve transport equation for radon behavior by using computational fluid dynamics (CFD) software such as FLUENT.

  13. A preliminary evaluation of the effects of Camellia sinensis on stroke induced rat model

    Directory of Open Access Journals (Sweden)

    Arsalan Ali

    2016-11-01

    Full Text Available Introduction: The objectives of current study are to test for Neuroprotective activity of Camellia sinensis in rat model of stroke and to evaluate the effect of Camellia Sinensis as anti-thrombolytic agent and in lowering the impact of disease with the behavioural changes before and after the induction of Stroke. Methods: Forty male albino rats were subjected to middle cerebral artery occlusion method for induction of stroke. Camellia sinensis extract was administered orally for 21 consecutive days prophylactically. Ischaemic rats administered the same volume of tap water were used as a control group. Functional outcome tests (Pasta, forelimb flexion, cylinder, staircase were performed. Rats were subjected to surgical procedures after 21 days’ treatment for analysis of stroke recovery. Results: Treatment with Camellia sinensis extract of 400 mg/kg PO significantly (P=0.000 enhanced neurological recovery in all tests performed. There was no significant difference of infarct volume among the experimental groups treated with Camellia sinensis extract 200 mg/kg PO. Conclusion: The outcomes of this study was vivid that Camellia sinensis extract is safe and effective mediator in clot dissolution and stroke reversal in rat model. It is the first agent found effective in no behavioural modification or adverse effects using its extract. Therefore, there is a need to evaluate, assess and appraise its desired characteristics and therapeutics in human subjects.

  14. Supporting fingerprint identification assessments using a skin stretch model - A preliminary study.

    Science.gov (United States)

    Lee, Rebecca; Comber, Bruce; Abraham, Joshua; Wagner, Michael; Lennard, Chris; Spindler, Xanthe; Roux, Claude

    2017-03-01

    To support fingerprint expert opinion, this research proposes an approach that combines subjective human analysis (as currently applied by fingerprint practitioners) with a statistical test of the result. This approach relies on the hypothesis that there are limits to the distortion caused by skin stretch. Such limits can be modelled by applying a multivariate normal probability density function to the distances and angle formed by a marked ridge characteristic and the two closest neighbouring minutiae. This study presents a model tested on 5 donors in total. The "expected range" of distortion in a within-source comparison using 10 minutiae was determined and compared to between-source comparisons. The expected range of log probability densities for within-source comparisons marked with 10 minutiae was determined to be from -33.4 to -60.0, with all between-source data falling outside this range, between -83 and -305. These results suggest that the proposed generated metric could be a powerful tool for the assessment of fingerprint expert opinion in operational casework.

  15. [Preliminary analysis of the relationship between peripheral arterial disease and other atherosclerosis markers and diabetic nephropathy].

    Science.gov (United States)

    Rioja, José; Moreno, Tamara; Coca, Inmaculada; Jiménez-Villodres, Manuel; Rodríguez-Morata, Alejandro; Valdivielso, Pedro

    2014-01-01

    To determine lipid serum levels, lipoproteins and other markers related to nephropathy and peripheral arterial disease (PAD) in a type 2 diabetes population stratified according to their level of renal dysfunction. A cross-sectional study was conducted on 72 type 2 diabetic patients followed-up in outpatient clinics. Patients were divided into 4 groups according to their estimated glomerular filtration rate (eGFR, mL/min) and albumin/creatinine ratio (ACR, mg/g) (eGFR > 60 and ACR 60 and ACR > 30 [n = 12], eGFR30-60 [n = 23] and eGFR renal and hematology parameters were measured. Finally, a multivariate Wald stepwise logistic regression statistic analysis was performed to determine variables independently associated with the presence of renal dysfunction. The univariate statistical analysis showed that the higher renal dysfunction, the higher the prevalence of hypertension, smoking habit and triglycerides levels, and the lower hemoglobin levels (P renal dysfunction (eGFR < 60 mL/min.). The further inclusion of the presence of PAD in the statistical model did not modify those associations. The results confirm the relationship between triglycerides levels and diabetic nephropathy, independently of the presence of PAD. Copyright © 2013 Sociedad Española de Arteriosclerosis. Published by Elsevier España. All rights reserved.

  16. A Preliminary Analysis of Calcifying Particles in the Serum and Prostates of Patients with Prostatic Inflammation

    Science.gov (United States)

    Jones, Jeffrey A.; Carlson, Grant; Kajander, E. Olavi; Warmflash, David; Taylor, Karen; Ayala, Gustavo; Shoskes, Daniel; Everett, Meg; Feedback, Dan; Ciftcioglu, Neva

    2006-01-01

    Chronic diseases of the prostate such as benign prostatic hyperplasia (BPH) & chronic pelvic pain syndrome (CPPS) have associated findings of chronic inflammation, despite a lack of causal relationship. Numerous attempts to define an infectious agent responsible for the clinical findings have been inconsistent. The possibility of an infectious agent, that has not been uncovered with routine culturing methods, forms the basis for this study. Serum from 940 healthy Finnish men were compared with serum from 40 Crohn's, 40 path dx prostatitis, & 40 with path dx carcinoma, using an enzyme-linked immunosorbant assay (ELISA), to detect antigens specific to Nanobacteria(NB) utilizing monoclonal antibodies (Ab) 5/3 and 8D10. This ELISA has not been validated for detecting NB-associated with clinical prostatic disease, yet cross-reactivity with other bacterial species is low. Immunohistochemistry was performed on de-paraffinized prostatic tissue slides, de-calcified with EDTA and stained with the DAKO Catalyzed Signal Amplification kit, employing 8D10 as the primary (target/antigen-detecting) Ab. The mean (plus or minus SD) & median concentrations of NB antigen (U/50 L) were 379.59 (plus or minus 219.28) & 640.00 for patients with prostatitis (BPH) vs 3.31 (plus or minus 3.55) & 2.94 for prostate adenocarcinoma, 1.88 (plus or minus 2.94) & 0.80 for Crohn's disease, & 7.43 (plus or minus 25.57) & 0.00 for patients with no clinical prostatic disease. Unpaired t-tests revealed statistically significant differences between the prostatitis (BPH) sera & each of the other groups with p less than 0.005, but no differences between the other groups themselves. Preliminary studies with immunohistochemistry & 3-D confocal microscopy reveal 16/24 tissue sections + for NB Ag in BPH vs. only 2/22 tissue sections with prostate cancer. The preliminary findings of this serum screening study suggest that NB antigen may be commonly found in the serum of patients with the pathological diagnosis

  17. Probabilistic Model-Based Safety Analysis

    CERN Document Server

    Güdemann, Matthias; 10.4204/EPTCS.28.8

    2010-01-01

    Model-based safety analysis approaches aim at finding critical failure combinations by analysis of models of the whole system (i.e. software, hardware, failure modes and environment). The advantage of these methods compared to traditional approaches is that the analysis of the whole system gives more precise results. Only few model-based approaches have been applied to answer quantitative questions in safety analysis, often limited to analysis of specific failure propagation models, limited types of failure modes or without system dynamics and behavior, as direct quantitative analysis is uses large amounts of computing resources. New achievements in the domain of (probabilistic) model-checking now allow for overcoming this problem. This paper shows how functional models based on synchronous parallel semantics, which can be used for system design, implementation and qualitative safety analysis, can be directly re-used for (model-based) quantitative safety analysis. Accurate modeling of different types of proba...

  18. Modeling and Analysis of Time-Varying Graphs

    CERN Document Server

    Basu, Prithwish; Ramanathan, Ram; Johnson, Matthew P

    2010-01-01

    We live in a world increasingly dominated by networks -- communications, social, information, biological etc. A central attribute of many of these networks is that they are dynamic, that is, they exhibit structural changes over time. While the practice of dynamic networks has proliferated, we lag behind in the fundamental, mathematical understanding of network dynamism. Existing research on time-varying graphs ranges from preliminary algorithmic studies (e.g., Ferreira's work on evolving graphs) to analysis of specific properties such as flooding time in dynamic random graphs. A popular model for studying dynamic graphs is a sequence of graphs arranged by increasing snapshots of time. In this paper, we study the fundamental property of reachability in a time-varying graph over time and characterize the latency with respect to two metrics, namely store-or-advance latency and cut-through latency. Instead of expected value analysis, we concentrate on characterizing the exact probability distribution of routing l...

  19. Preliminary thermo-mechanical analysis of angular beam impact on LHC collimators

    CERN Document Server

    Cauchi, M; Bertarelli, A; Carra, F; Dallocchio, A; Deboy, D; Mariani, N; Rossi, A; Lari, L; Mollicone, P; Sammut, N

    2012-01-01

    The correct functioning of the LHC Collimation System is crucial to attain the desired LHC luminosity performance. However, the requirements to handle high intensity beams can be demanding. In this respect, accident scenarios must be well studied in order to assess their effect on the robustness of the collimators. One of the most probable accident scenarios identified is an asynchronous beam dump coupled with slight angular misalignment errors of the collimator installation at the beam-line. Previous work presented a preliminary thermal evaluation of the extent of beam-induced damage for such scenarios, where it was shown that in some cases, a tilt of the jaw could actually serve to mitigate the effect of an asynchronous dump on the collimators. This paper will further analyze the response of tertiary collimators in presence of such angular jaw alignments. Such work will also help to start identifying optimal operational conditions.

  20. Preliminary SEU analysis of the SAMPEX MIL-STD-1773 space-flight data

    Science.gov (United States)

    Crabtree, Christina M.; LaBel, Kenneth A.; Stassinopoulos, E. G.; Miller, Jay T.

    1993-09-01

    The Small Explorer Data System (SEDS) relies heavily on new technologies in the electrical designs. Among the key technologies utilized are fiber optics. The effects of the harsh space radiation environment on these spacecraft components can be quite severe. This paper takes a preliminary look at the single event upset (SEU) data seen during the early portion of SAMPEX flight (launched in July 1992) versus the ground test predictions. The new technologies are addressed along with the error handling abilities of the fiber optic system (MIL-STD-1773). The predicted SAMPEX radiation environment is discussed as well as the methodology of SEU rate prediction utilizing both cosmic ray and proton concerns. A comparison of the flight data to ground test predictions is discussed along with information concerning the significance of where and when the SEUs have occurred.

  1. Situational analysis: preliminary regional review of the Mental Health Atlas 2014.

    Science.gov (United States)

    Gater, R; Chew, Z; Saeed, K

    2015-09-28

    The WHO comprehensive Mental Health Action Plan 2013-2020 established goals and objectives that Member States have agreed to meet by 2020. To update the Atlas of Mental Health 2011, specific indicators from the Mental Health Action Plan and additional indicators on service coverage were incorporated into the questionnaire for the Atlas 2014. The data will help facilitate improvement in information gathering and focus efforts towards implementation of the Mental Health Action Plan. The questionnaire was completed by the national mental health focal point of each country. This preliminary review seeks to consolidate data from the initial response to the Atlas 2014 questionnaire by Member States in the Eastern Mediterranean Region. Data for this review were analysed for the whole Region, by health systems groupings and by individual countries. Where possible, data are compared with the Mental Health Atlas 2011 to give a longitudinal perspective.

  2. Kinematic analysis of motor performance in robot-assisted surgery: a preliminary study.

    Science.gov (United States)

    Nisky, Ilana; Patil, Sangram; Hsieh, Michael H; Okamura, Allison M

    2013-01-01

    The inherent dynamics of the master manipulator of a teleoperated robot-assisted surgery (RAS) system can affect the movements of a human operator, in comparison with free-space movements. To measure the effects of these dynamics on operators with differing levels of surgical expertise, a da Vinci Si system was instrumented with a custom surgeon grip fixture and magnetic pose trackers. We compared users' performance of canonical motor control movements during teleoperation with the manipulator and freehand cursor control, and found significant differences in several aspects of motion, including target acquisition error, movement speed, and acceleration. In addition, there was preliminary evidence for differences between experts and novices. These findings could impact robot design, control, and training methods for RAS.

  3. Crystallization and preliminary X-ray diffraction analysis of maize aldose reductase

    Energy Technology Data Exchange (ETDEWEB)

    Kiyota, Eduardo [Laboratório de Biologia Estrutural, Instituto de Química, Universidade Estadual de Campinas, CP 6154, 13083-970 Campinas-SP (Brazil); Centro de Biologia Molecular e Engenharia Genética, Universidade Estadual de Campinas, Campinas-SP (Brazil); Sousa, Sylvia Morais de [Centro de Biologia Molecular e Engenharia Genética, Universidade Estadual de Campinas, Campinas-SP (Brazil); Santos, Marcelo Leite dos; Costa Lima, Aline da [Laboratório de Biologia Estrutural, Instituto de Química, Universidade Estadual de Campinas, CP 6154, 13083-970 Campinas-SP (Brazil); Menossi, Marcelo [Departamento de Genética e Evolução, Instituto de Biologia, Universidade Estadual de Campinas, Campinas-SP (Brazil); Yunes, José Andrés [Laboratório de Biologia Molecular, Centro Infantil Boldrini, Campinas-SP (Brazil); Aparicio, Ricardo, E-mail: aparicio@iqm.unicamp.br [Laboratório de Biologia Estrutural, Instituto de Química, Universidade Estadual de Campinas, CP 6154, 13083-970 Campinas-SP (Brazil)

    2007-11-01

    Preliminary X-ray diffraction studies of apo maize aldose reductase at 2.0 Å resolution are reported. Maize aldose reductase (AR) is a member of the aldo-keto reductase superfamily. In contrast to human AR, maize AR seems to prefer the conversion of sorbitol into glucose. The apoenzyme was crystallized in space group P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = 47.2, b = 54.5, c = 100.6 Å and one molecule in the asymmetric unit. Synchrotron X-ray diffraction data were collected and a final resolution limit of 2.0 Å was obtained after data reduction. Phasing was carried out by an automated molecular-replacement procedure and structural refinement is currently in progress. The refined structure is expected to shed light on the functional/enzymatic mechanism and the unusual activities of maize AR.

  4. Preliminary Psychometric Analysis of the Modified Perceived Value of Certification Tool for the Nurse Educator.

    Science.gov (United States)

    Barbe, Tammy

    2015-01-01

    The purpose of this study was to examine psychometric properties of the Perceived Value of Certification Tool© with a focus on nurse educator certification (PVCT-NE) in a sample of nurse educators. Greater understanding of faculty perceptions of certification is necessary to facilitate a strong cadre of nursing faculty; however, research around nurse educator certification is limited by a lack of reliable and valid instruments to measure such perceptions. Twenty-four nursing faculty from one university participated in the psychometric study, which involved completion of the PVCT-NE in a web-based survey format. Internal consistency reliability was excellent. Cronbach's alpha for the total PVCT-NE was .94 (.93 for the intrinsic subscale and .86 for the extrinsic subscale). A content validity index of .95 was obtained. There is preliminary evidence that the PVCT-NE is a reliable and valid instrument to measure perceived value of certification in nurse educators.

  5. Preliminary benefit-cost analysis of the Fast Flux Test Facility (FFTF) power addition

    Energy Technology Data Exchange (ETDEWEB)

    Callaway, J.M.; Lezberg, A.J.; Scott, M.J.; Tawil, J.J.

    1984-07-01

    The primary objective of this report is to conduct a preliminary benefit-cost study for the proposed power addition to FFTF to determine whether the project is cost-effective. If the project is authorized, construction will begin in 1986 and end in 1991. Full power operation is scheduled to begin in 1991 and a project life of 20 years is assumed. The undiscounted cost during the construction period of the FFTF power addition is estimated to be approximately $117 million over the construction period (1984 dollars). An additional $3 million is estimated as the opportunity cost - or value of these resources in their most favorable alternative use - of surplus FFTF equipment and unused CRBR equipment, including materials for steam generator fabrication. The annual operating and maintenance cost of the project is estimated to be about $2.1 million in 1984 dollars. 20 references.

  6. Assessing the long-term probabilistic volcanic hazard for tephra fallout in Reykjavik, Iceland: a preliminary multi-source analysis

    Science.gov (United States)

    Tonini, Roberto; Barsotti, Sara; Sandri, Laura; Tumi Guðmundsson, Magnús

    2015-04-01

    Icelandic volcanism is largely dominated by basaltic magma. Nevertheless the presence of glaciers over many Icelandic volcanic systems results in frequent phreatomagmatic eruptions and associated tephra production, making explosive eruptions the most common type of volcanic activity. Jökulhlaups are commonly considered as major volcanic hazard in Iceland for their high frequency and potentially very devastating local impact. Tephra fallout is also frequent and can impact larger areas. It is driven by the wind direction that can change with both altitude and season, making impossible to predict a priori where the tephra will be deposited during the next eruptions. Most of the volcanic activity in Iceland occurs in the central eastern part, over 100 km to the east of the main population centre around the capital Reykjavík. Therefore, the hazard from tephra fallout in Reykjavík is expected to be smaller than for communities settled near the main volcanic systems. However, within the framework of quantitative hazard and risk analyses, less frequent and/or less intense phenomena should not be neglected, since their risk evaluation depends on the effects suffered by the selected target. This is particularly true if the target is highly vulnerable, as large urban areas or important infrastructures. In this work we present the preliminary analysis aiming to perform a Probabilistic Volcanic Hazard Assessment (PVHA) for tephra fallout focused on the target area which includes the municipality of Reykjavík and the Keflavík international airport. This approach reverts the more common perspective where the hazard analysis is focused on the source (the volcanic system) and it follows a multi-source approach: indeed, the idea is to quantify, homogeneously, the hazard due to the main hazardous volcanoes that could pose a tephra fallout threat for the municipality of Reykjavík and the Keflavík airport. PVHA for each volcanic system is calculated independently and the results

  7. Large landslides in the Pyrenees: preliminary tasks carried out for a harmonized cross-border risk analysis

    Science.gov (United States)

    Moya, José; Grandjean, Gilles; Copons, Ramon; Vaunat, Jean; Buxó, Pere; Colas, Bastien; Darrozes, José; Gasc, Muriel; Guinau, Marta; Gutiérrez, Francisco; García, Juan Carlos; Virely, Didier; Crosetto, Michele; Mas, Raül

    2017-04-01

    Large landslides are recognised as one of the main erosional agents in mountain ranges, having a significant influence on landscape evolution. However, few efforts have been carried out to assess their geomorphological impact from a regional perspective. Regional-scale investigations are also necessary for the reliable evaluation of the associated risks (i.e. for land-use planning). Large landslides are common in the Pyrenees but: 1) their geographic distribution on a regional scale is not well known; 2) their geological and geomorphological controlling factors have been only studied preliminarily; and 3) their state of activity and stability conditions are unknown for most of the cases. Regional analyses of large landslides, as those carried out by Crosta et al. (2013) in the Alps, are rare worldwide. Jarman et al. (2014) conducted a very preliminary analysis in a sector of the Pyrenees. The construction of a cartographic inventory constitutes the basics for such type of studies, which are typically hindered by the lack of cross-border landslide data bases and methodologies. The aim of this contribution is to present the preliminary works carried out for constructing a harmonized inventory of large landslides in the Pyrenees, involving for the first time both sides of the cordillera and the main groups working in landslide risk in France, Spain and Andorra. Methods used for landslide hazard and risk analysis have been compiled and compared, showing a significant divergence, even as regards the terminology. A preliminary cross-border inventory sheet on risk of large landslides has been prepared. It includes specific fields for the assessment of landslide activity (by using complimentary methods such as morpho-stratigraphy, morphometric analysis and remote techniques) and indirect potential costs (that typically overcome direct ones), which usually are neglected in the existing data bases. Crosta, G.B., Frattini, P. and Agliardi, F., 2013. Deep seated gravitational

  8. Engineering a thalamo-cortico-thalamic circuit on SpiNNaker: a preliminary study towards modelling sleep and wakefulness

    Directory of Open Access Journals (Sweden)

    Basabdatta Sen Bhattacharya

    2014-05-01

    Full Text Available We present a preliminary study of a thalamo-cortico-thalamic (TCT implementation on SpiNNaker (Spiking Neural Network architecture, a brain inspired hardware platform designed to incorporate the inherent biological properties of parallelism, fault tolerance and energy efficiency. These attributes make SpiNNaker an ideal platform for simulating biologically plausible computational models. Our focus in this work is to design a TCT framework that can be simulated on SpiNNaker to mimic dynamical behaviour similar to Electroencephalogram (EEG time and power-spectra signatures in sleep-wake transition. The scale of the model is minimised for simplicity in this proof-of-concept study; thus the total number of spiking neurons is approximately 1000 and represents a `mini-column' of the thalamocortical tissue. All data on model structure, synaptic layout and parameters is inspired from previous studies and abstracted at a level that is appropriate to the aims of the current study as well as computationally suitable for model simulation on a small 4-chip SpiNNaker system. The initial results from selective deletion of synaptic connectivity parameters in the model show similarity with EEG time series characteristics of sleep and wakefulness. These observations provide a positive perspective and a basis for future implementation of a very large scale biologically plausible model of thalamo-cortico-thalamic interactivity---the essential brain circuit that regulates the biological sleep-wake cycle and associated EEG rhythms.

  9. Geologic Framework Model Analysis Model Report

    Energy Technology Data Exchange (ETDEWEB)

    R. Clayton

    2000-12-19

    The purpose of this report is to document the Geologic Framework Model (GFM), Version 3.1 (GFM3.1) with regard to data input, modeling methods, assumptions, uncertainties, limitations, and validation of the model results, qualification status of the model, and the differences between Version 3.1 and previous versions. The GFM represents a three-dimensional interpretation of the stratigraphy and structural features of the location of the potential Yucca Mountain radioactive waste repository. The GFM encompasses an area of 65 square miles (170 square kilometers) and a volume of 185 cubic miles (771 cubic kilometers). The boundaries of the GFM were chosen to encompass the most widely distributed set of exploratory boreholes (the Water Table or WT series) and to provide a geologic framework over the area of interest for hydrologic flow and radionuclide transport modeling through the unsaturated zone (UZ). The depth of the model is constrained by the inferred depth of the Tertiary-Paleozoic unconformity. The GFM was constructed from geologic map and borehole data. Additional information from measured stratigraphy sections, gravity profiles, and seismic profiles was also considered. This interim change notice (ICN) was prepared in accordance with the Technical Work Plan for the Integrated Site Model Process Model Report Revision 01 (CRWMS M&O 2000). The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. The GFM is one component of the Integrated Site Model (ISM) (Figure l), which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components: (1) Geologic Framework Model (GFM); (2) Rock Properties Model (RPM); and (3) Mineralogic Model (MM). The ISM merges the detailed project stratigraphy into model stratigraphic units that are most useful for the primary downstream models and the

  10. Preliminary safety analysis for key design features of KALIMER with breakeven core

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kwon, Y. M.; Chang, W. P.; Suk, S. D.; Lee, Y. B.; Jeong, K. S

    2001-06-01

    KAERI is currently developing the conceptual design of a Liquid Metal Reactor, KALIMER (Korea Advanced Liquid MEtal Reactor) under the Long-term Nuclear R and D Program. KALIMER addresses key issues regarding future nuclear power plants such as plant safety, economics, proliferation, and waste. In this report, descriptions of safety design features and safety analyses results for selected ATWS accidents for the breakeven core KALIMER are presented. First, the basic approach to achieve the safety goal is introduced in Chapter 1, and the safety evaluation procedure for the KALIMER design is described in Chapter 2. It includes event selection, event categorization, description of design basis events, and beyond design basis events.In Chapter 3, results of inherent safety evaluations for the KALIMER conceptual design are presented. The KALIMER core and plant system are designed to assure benign performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated anticipated transient without scram (ATWS) have been performed to investigate the KALIMER system response to the events. In Chapter 4, the design of the KALIMER containment dome and the results of its performance analyses are presented. The design of the existing containment and the KALIMER containment dome are compared in this chapter. Procedure of the containment performance analysis and the analysis results are described along with the accident scenario and source terms. Finally, a simple methodology is introduced to investigate the core energetics behavior during HCDA in Chapter 5. Sensitivity analyses have been performed for the KALIMER core behavior during super-prompt critical excursions, using mathematical formulations developed in the framework of the Modified Bethe-Tait method. Work energy potential was then calculated based on the isentropic fuel expansion model.

  11. Documentation of Hanford Site independent review of the Hanford Waste Vitrification Plant Preliminary Safety Analysis Report. Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Herborn, D.I.

    1993-11-01

    Westinghouse Hanford Company (WHC) is the Integrating Contractor for the Hanford Waste Vitrification Plant (HWVP) Project, and as such is responsible for preparation of the HWVP Preliminary Safety Analysis Report (PSAR). The HWVP PSAR was prepared pursuant to the requirements for safety analyses contained in US Department of Energy (DOE) Orders 4700.1, Project Management System (DOE 1987); 5480.5, Safety of Nuclear Facilities (DOE 1986a); 5481.lB, Safety Analysis and Review System (DOE 1986b) which was superseded by DOE order 5480-23, Nuclear Safety Analysis Reports, for nuclear facilities effective April 30, 1992 (DOE 1992); and 6430.lA, General Design Criteria (DOE 1989). The WHC procedures that, in large part, implement these DOE requirements are contained in WHC-CM-4-46, Nonreactor Facility Safety Analysis Manual. This manual describes the overall WHC safety analysis process in terms of requirements for safety analyses, responsibilities of the various contributing organizations, and required reviews and approvals.

  12. Preliminary design report for SCDAP/RELAP5 lower core plate model

    Energy Technology Data Exchange (ETDEWEB)

    Coryell, E.W. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States). Idaho National Engineering and Environmental Lab.; Griffin, F.P. [Oak Ridge National Lab., TN (United States)

    1998-07-01

    The SCDAP/RELAP5 computer code is a best-estimate analysis tool for performing nuclear reactor severe accident simulations. Under primary sponsorship of the US Nuclear Regulatory Commission (NRC), Idaho National Engineering and Environmental Laboratory (INEEL) is responsible for overall maintenance of this code and for improvements for pressurized water reactor (PWR) applications. Since 1991, Oak Ridge National Laboratory (ORNL) has been improving SCDAP/RELAP5 for boiling water reactor (BWR) applications. The RELAP5 portion of the code performs the thermal-hydraulic calculations for both normal and severe accident conditions. The structures within the reactor vessel and coolant system can be represented with either RELAP5 heat structures or SCDAP/RELAP5 severe accident structures. The RELAP5 heat structures are limited to normal operating conditions (i.e., no structural oxidation, melting, or relocation), while the SCDAP portion of the code is capable of representing structural degradation and core damage progression that can occur under severe accident conditions. DCDAP/RELAP5 currently assumes that molten material which leaves the core region falls into the lower vessel head without interaction with structural materials. The objective of this design report is to describe the modifications required for SCDAP/RELAP5 to treat the thermal response of the structures in the core plate region as molten material relocates downward from the core, through the core plate region, and into the lower plenum. This has been a joint task between INEEL and ORNL, with INEEL focusing on PWR-specific design, and ORNL focusing upon the BWR-specific aspects. Chapter 2 describes the structures in the core plate region that must be represented by the proposed model. Chapter 3 presents the available information about the damage progression that is anticipated to occur in the core plate region during a severe accident, including typical SCDAP/RELAP5 simulation results. Chapter 4 provides a

  13. Medical chilling device designed for hypothermic hydration graft storage system: Design, thermohydrodynamic modeling, and preliminary testing

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Jung Hwan [Hongik University, Seoul (Korea, Republic of)

    2015-02-15

    Hypothermic hydration graft storage is essential to reduce the metabolic demand of cells in vitro. The alleviated metabolic demands reduce the emergence rate of anaerobic metabolism generating adenosine triphosphate (ATP) energy that creates free radicals. The cessive free radicals can damage cells and tissues due to their highly oxidative power with molecules. Current cooling systems such as a conventional air cooling system and an ice pack system are inappropriate for chilling cell tissues in vitro because of inconvenience in use and inconsistent temperature sustainability caused by large size and progressive melting, respectively. Here, we develop a medical chilling device (MCD) for hypothermic hydration graft storage based on thermo-hydrodynamic modeling and thermal electric cooling technology. Our analysis of obtained hydrodynamic thermal behavior of the MCD revealed that the hypothermic condition of 4 .deg. C was continuously maintained, which increased the survival rates of cells in vitro test by reduced free radicals. The validated performance of the MCD promises future development of an optimal hypothermic hydration graft storage system designed for clinical use.

  14. Expression, purification and preliminary crystallographic analysis of a haem-utilizing protein, HutX, from Vibrio cholerae

    Science.gov (United States)

    Su, Tiantian; Chi, Kaikai; Wang, Kang; Guo, Liming; Huang, Yan

    2015-01-01

    Vibrio cholerae, the causative agent of cholera, has developed a variety of mechanisms to obtain the limited-availability iron from human hosts. One important method for iron acquisition is through haem-uptake systems. Although the transport of haem has been widely studied, the fate of haem once it enters the cytoplasm remains an open question. Here, preliminary X-ray crystallographic analysis was performed on HutX, a member of the conserved haem-utilization operon from V. cholerae strain N16961. The crystals of HutX were found to belong to the orthorhombic space group C2221, with unit-cell parameters a = 50.1, b = 169.0, c = 81.8 Å. There are two protein molecules in the asymmetric unit, with a corresponding Matthews coefficient V M of 2.06 Å3 Da−1 and a solvent content of 40.28%. PMID:25664785

  15. Purification, crystallization and preliminary X-ray crystallographic analysis of rice bifunctional α-amylase/subtilisin inhibitor from Oryza sativa

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yi-Hung [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Peng, Wen-Yan [Institute of Bioinformatics and Structural Biology, National Tsing-Hua University, Hsinchu 30013,Taiwan (China); Huang, Yen-Chieh [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Guan, Hong-Hsiang; Hsieh, Ying-Cheng [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Institute of Bioinformatics and Structural Biology, National Tsing-Hua University, Hsinchu 30013,Taiwan (China); Liu, Ming-Yih [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Chang, Tschining [Department of Hospitality Management, Nan Jeon Institute of Technology, Yen-Shui, Tainan 73746,Taiwan (China); Chen, Chun-Jung, E-mail: cjchen@nsrrc.org.tw [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Department of Physics, National Tsing-Hua University, Hsinchu 30013,Taiwan (China)

    2006-08-01

    The crystallization of rice α-amylase/subtilisin bifunctional inhibitor is reported. Rice bifunctional α-amylase/subtilisin inhibitor (RASI) can inhibit both α-amylase from larvae of the red flour beetle (Tribolium castaneum) and subtilisin from Bacillus subtilis. The synthesis of RASI is up-regulated during the late milky stage in developing seeds. The 8.9 kDa molecular-weight RASI from rice has been crystallized using the hanging-drop vapour-diffusion method. According to 1.81 Å resolution X-ray diffraction data from rice RASI crystals, the crystal belongs to space group P2{sub 1}2{sub 1}2, with unit-cell parameters a = 79.99, b = 62.95, c = 66.70 Å. Preliminary analysis indicates two RASI molecules in an asymmetric unit with a solvent content of 44%.

  16. Purification, crystallization and preliminary X-ray crystallographic analysis of rice Bowman–Birk inhibitor from Oryza sativa

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yi-Hung [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Li, Hsin-Tai [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Institute of Bioinformatics and Structural Biology, National Tsing-Hua University, Hsinchu 30013,Taiwan (China); Huang, Yen-Chieh [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Hsieh, Ying-Cheng; Guan, Hong-Hsiang [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Institute of Bioinformatics and Structural Biology, National Tsing-Hua University, Hsinchu 30013,Taiwan (China); Liu, Ming-Yih [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Chang, Tschining; Wang, Andrew H.-J., E-mail: ahjwang@gate.sinica.edu.tw [Institute of Biological Chemistry, Academia Sinica, Taipei 11529,Taiwan (China); Chen, Chun-Jung, E-mail: ahjwang@gate.sinica.edu.tw [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Department of Physics, National Tsing-Hua University, Hsinchu 30013,Taiwan (China)

    2006-06-01

    Rice Bowman–Birk inhibitor was expressed and crystallized. Bowman–Birk inhibitors (BBIs) are cysteine-rich proteins with inhibitory activity against proteases that are widely distributed in monocot and dicot species. The expression of rice BBI from Oryza sativa is up-regulated and induced by pathogens or insects during germination of rice seeds. The rice BBI (RBTI) of molecular weight 15 kDa has been crystallized using the hanging-drop vapour-diffusion method. According to the diffraction of rice BBI crystals at a resolution of 2.07 Å, the unit cell belongs to space group P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = 74.37, b = 96.69, c = 100.