WorldWideScience

Sample records for preliminary erosion analysis

  1. Preliminary assessment of soil erosion impact during forest restoration process

    Science.gov (United States)

    Lai, Yen-Jen; Chang, Cheng-Sheng; Tsao, Tsung-Ming; Wey, Tsong-Huei; Chiang, Po-Neng; Wang, Ya-Nan

    2014-05-01

    Taiwan has a fragile geology and steep terrain. The 921 earthquake, Typhoon Toraji, Typhoon Morakot, and the exploitation and use of the woodland by local residents have severely damaged the landscape and posed more severe challenges to the montane ecosystem. A land conservation project has been implemented by the Experimental Forest of National Taiwan University which reclaimed approximately 1,500 hectares of leased woodland from 2008 to 2010, primarily used to grow bamboo, tea trees, betel nut, fruit, and vegetable and about 1,298 hectares have been reforested. The process of forest restoration involves clear cutting, soil preparation and a six-year weeding and tending period which may affect the amount of soil erosion dramatically. This study tried to assess the impact of forest restoration from the perspective of soil erosion through leased-land recovery periods and would like to benefit the practical implementation of reforestation in the future. A new plantation reforested in the early 2013 and a nearby 29-year-old mature forest were chosen as experimental and comparison sites. A self-designed weir was set up in a small watershed of each site for the runoff and sediment yield observation. According to the observed results from May to August 2013, a raining season in Taiwan, the runoff and erosion would not as high as we expected, because the in-situ soil texture of both sites is sandy loam to sandy with high percentage of coarse fragment which increased the infiltration. There were around 200 kg to 250 kg of wet sand/soil yielded in mature forest during the hit of Typhoon Soulik while the rest of the time only suspended material be yielded at both sites. To further investigate the influence of the six-year weeding and tending period, long term observations are needed for a more completed assessment of soil erosion impact.

  2. Preliminary studies for monitoring erosion in pipelines by the acoustic emission technique

    Energy Technology Data Exchange (ETDEWEB)

    Tiboni, G.B. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil). Programa de Pos-graduacao em Engenharia Mecanica e de Materiais; Marquardt, T.A.S; SantaMaria, V.A.R.; Silva, C.H. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)

    2009-07-01

    The aim of this work is to present some applications of Acoustic Emission (AE), which is a powerful technique for nondestructive testing in Tribology, treated here as tests of friction, wear by contact fatigue, wear by slip and wear by erosion. In this work a special attention is given to solid particle erosion and hydro-abrasive erosion, problems found in almost every pipeline that lead to local loss of material and eventually rupture of the line. The technique of AE can be used as an efficient online tool when, primarily, to monitor tribological aspects such as the rate of wear of materials, as well as detect the spread of flaws in them. In wear by erosion, specifically, the parameters of RMS and acoustic energy are capable of correlation with the type of mechanism for removal of material. As a preliminary goal, erosive tests were performed with gas (air) without erosive particles, monitored by AE, varying the surface of the samples and the internal diameter the nozzle, taking the differences in signs of AE. Correlation between parameters of RMS and amplitude were noticed with the variables of the tests, such as roughness and fluid velocity. The RMS parameter showed a exponential correction with the fluid velocity, however the amplitude signals had a linear behavior. The knowledge of these parameters is essential for the development of a system that is able to quantify the wear rate of a pipeline without taking it out of operation. (author)

  3. RISK LEVEL ANALYSIS ON THE PREVENTIVE EROSION CAPACITY OF BRIDGES

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Deficiency of the Preventive Erosion Capacity (PEC) of a bridge pier is the main factor leading to bridge failures. In this paper, the PEC of bridge piers was analyzed using the stochastic analysis method. The definitions of the reliability and risk level of a bridge pier subjected to water erosion were proposed and a computational model for erosion depth and risk level in was suggested.

  4. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part of the w......The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  5. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  6. Analysis of experimental studies on gully erosion: a global review

    Science.gov (United States)

    Castillo, Carlos; Gómez, Jose A.

    2015-04-01

    Research on gully erosion has increased significantly in the last decades. Despite the growing interest on the topic, relevant knowledge gaps still remain a challenge for gully erosion researchers (Poesen, 2011). Moreover, many of these studies are mainly descriptive, with little quantitative data allowing a comparison of the severity of the processes among different environments and conditions. The aim of this communication is to analyse the available experimental data in gully erosion literature involving quantitative information from the Web of Science datasets. Our objective is to investigate relevant trends of this type of erosion on the world scale. We have evaluated the role of gully erosion in the overall soil losses as well as the magnitude of the morphological variables. Also, we analysed the characteristics of image-based and field surveys regarding the technique employed, duration and data collection frequency. In this communication, we intend to provide insights on the evolution of gully erosion research up to the present moment in order to gain perspectives on the design of future efforts in the topic. References Poesen, J. 2011. Challenges in gully erosion research. Landform Analysis, Vol. 17: 5-9.

  7. Rio Grande Lidar Bank Erosion Monitoring: Preliminary 2007-2008 Results and Survey Design Considerations

    Science.gov (United States)

    2010-09-01

    point clouds were loaded into IMInspect for further processing and analysis. Planes were fitted to manually selected points along the waterline in...described by Wawrzyniec et al. (2007b) ERDC/CHL CR-10-3 16 to directly measure the differences between point clouds . This would eliminate the...same as in Figure 5 and vectors show measured erosion at select points. To estimate the volume of sediment lost downstream of the dam, the TLS point

  8. Preliminary analysis of relation between natural and anthropic elements in the calanco area of Podere Paiccia (Southern Tuscany - Italy): crowns of mudflow vs. erosion control practices (graticciate) during the period 1989-2015.

    Science.gov (United States)

    Colica, Antonella; Martinelli, Lorenzo

    2016-04-01

    The study area Podere Paiccia, which is characterized by four calanchi, extends over a surface of 155,000 square meters, on N-NNW slopes, from 435 to 513m, with an average slope of 25° and it develops on Pliocene marine bedrocks. The calanchi represent an important morphology in southern Tuscany and also in Pliocene and Plio-Pleistocene bedrock in nearby areas of piedmont zones of Apennines. During the 1989 the "Consorzio di Bonifica della Val d'Orcia" introduced erosion control practices named graticciate (fences) along three of the four calanchi. They consisted of chestnut stakes (about 1 m long), fixed in the ground, connected by smaller transverse stakes and placed perpendicularly to the slopes, at 7-10 meters intervals, extending laterally for about 10 meters. These calanchi are formed by gullies, rills, crowns and mudflows. The crowns, one of the more dynamic erosional forms, are generally arch-shaped (40-50 cm in height, vary in width, gradient 54°÷90°). The four calanchi, named 1-2-3-4, were divided into three zones of equal size: high, medium and low. The analysis conducted by photo shoots and field measurements, during the years 1989-1992-1996-2002-2005-2015, aim to discover the relation between crowns and graticciate. In 1989, 1 did not present graticciate, 2 had graticciate in all 3 zones (28), 3 and 4 had graticciate (24 and 22 respectively) but only in the medium and high zones. The crowns (57 in 1, 58 in 2, 78 in 3 and 56 in 4) rise towards the ridges. In case during the ascend crowns meet the graticciate, these last are deformed and then destroyed (periods: 1989÷1992, 1992÷1996, 1996÷2002, 2002÷2005, 2005÷2015, graticciate destroyed along the 2, 3, 4,% mean values: 51, 87, 100 - 26, 46, 72, 90 costant value from 2005 - 57, 75 costant value 1992÷2002, 78,100). Until total destruction, graticciate limit the number of crowns in the high zones. Along 2, 3 and 4 the number of crowns is greater in the medium zones (mean values of the ratios

  9. Numerical Analysis of Erosion Caused by Biomimetic Axial Fan Blade

    Directory of Open Access Journals (Sweden)

    Jun-Qiu Zhang

    2013-01-01

    Full Text Available Damage caused by erosion has been reported in several industries for a wide range of situations. In the present work, a new method is presented to improve the erosion resistance of machine components by biomimetic method. A numerical investigation of solid particle erosion in the standard and biomimetic configuration blade of axial fan is presented. The analysis consists in the application of the discrete phase model, for modeling the solid particles flow, and the Eulerian conservation equations to the continuous phase. The numerical study employs computational fluid dynamics (CFD software, based on a finite volume method. User-defined function was used to define wear equation. Gas/solid flow axial fan was simulated to calculate the erosion rate of the particles on the fan blades and comparatively analyzed the erosive wear of the smooth surface, the groove-shaped, and convex hull-shaped biomimetic surface axial flow fan blade. The results show that the groove-shaped biomimetic blade antierosion ability is better than that of the other two fan blades. Thoroughly analyze of antierosion mechanism of the biomimetic blade from many factors including the flow velocity contours and flow path lines, impact velocity, impact angle, particle trajectories, and the number of collisions.

  10. Bank stability analysis for fluvial erosion and mass failure

    Science.gov (United States)

    The central objective of this study was to highlight the differences in magnitude between mechanical and fluvial streambank erosional strength with the purpose of developing a more comprehensive bank stability analysis. Mechanical erosion and ultimately failure signifies the general movement or coll...

  11. Concept Overview & Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, Mark

    2017-07-12

    'H2@Scale' is an opportunity for wide-scale use of hydrogen as an intermediate that carries energy from various production options to multiple uses. It is based on identifying and developing opportunities for low-cost hydrogen production and investigating opportunities for using that hydrogen across the electricity, industrial, and transportation sectors. One of the key production opportunities is use of low-cost electricity that may be generated under high penetrations of variable renewable generators such as wind and solar photovoltaics. The technical potential demand for hydrogen across the sectors is 60 million metric tons per year. The U.S. has sufficient domestic renewable resources so that each could meet that demand and could readily meet the demand using a portfolio of generation options. This presentation provides an overview of the concept and the technical potential demand and resources. It also motivates analysis and research on H2@Scale.

  12. A preliminary study on vegetation-erosion dynamics and its applications

    Institute of Scientific and Technical Information of China (English)

    WANG; Zhaoyin; WANG; Guangqian; LI; Changzhi

    2005-01-01

    Vegetation-erosion dynamics is a new interdisciplinary science, studying the laws of evolution of watershed vegetation under the action of various ecological stresses. Introducing a qualitative expression of ecological stresses in this paper, the present authors establish the coupled differential equations for the vegetation-erosion process and derive a theoretical solution. The model is applied to the Anjiagou watershed on the Loess Pateau and the Xiaojiang watershed and its sub-watersheds on the Yunnan Plateau. The calculated results agree well with the vegetation development processes. Abstracted from the differential equations the so-called vegetation-erosion chart is worked out, with which we can predict the development trend of vegetation under no human stresses. It is demonstrated that the erosion control is important for vegetation development and reforestation must be a long-term strategy. On the Yunnan Plateau with relatively high precipitation and temperature, vegetation can be greatly improved if erosion is controlled. On the dry and cold Loess Pateau suffering from high rate of soil erosion, however, vegetation can effectively control erosion but erosion reduction exhibits low effectiveness on vegetation development. Vegetation in the area is not stable and management is always needed to maintain the vegetation.

  13. Preliminary hazards analysis -- vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.

  14. 50 Years of coastal erosion analysis: A new methodological approach.

    Science.gov (United States)

    Prieto Campos, Antonio; Diaz Cuevas, Pilar; Ojeda zujar, Jose; Guisado-Pintado, Emilia

    2017-04-01

    Coasts over the world have been subjected to increased anthropogenic pressures which combined with natural hazards impacts (storm events, rising sea-levels) have led to strong erosion problems with negative impacts on the economy and the safety of coastal communities. The Andalusian coast (South Spain) is a renowned global tourist destination. In the past decades a deep transformation in the economic model led to significant land use changes: strong regulation of rivers, urbanisation and occupation of dunes, among others. As a result irreversible transformations on the coastline, from the aggressive urbanisation undertaken, are now to be faced by local authorities and suffered by locals and visitors. Moreover, the expected impacts derived from the climate change aggravated by anthropic activities emphasises the need for tools that facilitates decision making for a sustainable coastal management. In this contribution a homogeneous (only a proxy and one photointerpreter) methodology is proposed for the calculation of coastal erosion rates of exposed beaches in Andalusia (640 km) through the use of detailed series (1:2500) of open source orthophotographies for the period (1956-1977-2001-2011). The outstanding combination of the traditional software DSAS (Digital Shoreline Analysis System) with a spatial database (PostgreSQL) which integrates the resulting erosion rates with related coastal thematic information (geomorphology, presence of engineering infrastructures, dunes and ecosystems) enhances the capacity of analysis and exploitation. Further, the homogeneity of the method used allows the comparison of the results among years in a highly diverse coast, with both Mediterranean and Atlantic façades. The novelty development and integration of a PostgreSQL/Postgis database facilitates the exploitation of the results by the user (for instance by relating calculated rates with other thematic information as geomorphology of the coast or the presence of a dune field on

  15. Analysis of deposition and erosion of Dongting Lake by GIS

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The sediments of the Dongting Lake come from four channels (one of them was closed in 1959), connected with the Yangtze River, four tributaries (Lishui, Yuanjiang, Zishui and Xiangjiang)and local area, and some of them are transported into the Yangtze River in Chenglingji, which is located at the exit of the Dongting Lake, some of them deposit into drainage system in the lake region and the rest deposit into the lake. The annual mean sediment is 166,555x104 t, of which 80% come from the four channels, 18% from the four tributaries and 2% from local area, whereas 26% of the total sediments are transported into the Yangtze River and 74% deposited into the lake and the lake drainage system. Based on topographic maps of 1974, 1988 and 1998, and the spatial analysis method with geographic information system (GIS), changes in sediment deposition and erosion are studied in this paper. By overlay analysis of 1974 and 1988, 1988 and 1998, erosion and sediments deposition areas are defined. The main conclusions are: (1) sediment rate in the lake is larger than erosion rate from 1974 to 1998. The mean deposition in the lake is 0.43 m; (2) annual sediment deposition is the same between 1974-1988 and 1988-1998, but the annual volume of deposition and erosion of 1988-1998 is bigger than that in 1974-1988; (3) before the completion of the Three Gorges Reservoir,there will be 7.82x108 m3 of sediments deposited in the lake, which would make the lake silted up by 0.33 m; (4) in the lake, the deposition area is found in the north of the east Dongting Lake, the south-west of the south Dongting Lake, and the east of the west Dongting Lake; while the eroded area is in the south of the east Dongting Lake, the middle of the south Dongting Lake, the west of the west Dongting Lake, as well as Xiangjiang and Lishui river flood channels.

  16. Soil erosion rates from mixed soil and gravel surfaces in a wind tunnel: A preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.

    1988-12-01

    Tests of wind erosion were performed in a controlled-environment wind tunnel to support the development of natural-material protective barriers for long-term isolation of radioactive waste. Barrier performance standards currently being developed for internal and external barrier performance are expected to mandate a surface layer that is resistant to wind erosion. The purpose of this study was to initiate a series of tests to determine suitable soil and gravel mixtures for such a barrier and to test worst-case surface layer conditions under the influence of high wind speeds. Six mixed soil and gravel surfaces were prepared, weathered to represent natural wind-blown desert areas, and subjected to controlled wind erosion forces in a wind tunnel. The applied erosive forces, including surface shear forces, were characterized to provide a means of relating wind tunnel results with actual field conditions. Soil particle losses from the surfaces caused by suspension, saltation, and surface creep were monitored by aerosol sample probes and mass balance measurements. 23 refs., 22 figs., 3 tabs.

  17. Preliminary investigations on transient erosion at Kalpakkam Beach, east coast of India during June 1990

    Digital Repository Service at National Institute of Oceanography (India)

    Krishnakumar, V.; Vethamony, P.; Swamy, G.N.

    Rapid erosion experienced at the southern end of Kalpakkam beach, east coast of India during June, 1990 with relatively calm sea conditions is found to be related to an imbalance caused by the unusual run-off through Palar River due to an unseasonal...

  18. Effect of Soil Erosion on Spring Barley Growth in East Anglia,England:Preliminary Results

    Institute of Scientific and Technical Information of China (English)

    LUXI-XI; Y.BIOT

    1994-01-01

    The effect of soil erosion on spring barley growth was studied on a deep loamy soil in East Anglia,England,in 1992,Soil erosion was simulated by three levels of soil desurfacing,7.5,18and 30cm with three replicates.Significant differences in crop height,ground cover and crop yield were observed between the three levels of desurfacing.Soil desurfacing also has a singnificant effect on soil moisture at the 20cm depth.The interaction between soil removal and crop performance affected soil moisture at the depths of 50 and 100cm,No significant differences were found in runoff and sediment etween the three topsoil removals due to very dry growing season.Regression equations were developed between spring barley yield and soil desurfacing Spring barley grain yield declined by 97.6kg/ha per cm soil desurfacing.

  19. Hydrothermal Liquefaction Treatment Preliminary Hazard Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Peter P.; Wagner, Katie A.

    2015-08-31

    A preliminary hazard assessment was completed during February 2015 to evaluate the conceptual design of the modular hydrothermal liquefaction treatment system. The hazard assessment was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. This analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public.

  20. Erosion analysis related to corn-based ethanol production in the US

    Science.gov (United States)

    Since the Renewable Fuel Standard has encouraged the development of biofuels, the US has seen an increase in corn production for conversion to ethanol. In many of these agricultural regions, increased corn production is accompanied with increased erosion. An erosion analysis w...

  1. Coastal erosion and accretion in Pak Phanang, Thailand by GIS analysis of maps and satellite imagery

    Directory of Open Access Journals (Sweden)

    Sayedur Rahman Chowdhury

    2013-12-01

    Full Text Available Coastal erosion and accretion in Pak Phanang of southern Thailand between 1973 and 2003 was measured using multi-temporal topographic maps and Landsat satellite imageries. Within a GIS environment landward and seaward movements of shoreline was estimated by a transect-based analysis, and amounts of land accretion and erosion were estimated by a parcel-based geoprocessing. The whole longitudinal extent of the 58 kilometer coast was classified based on the erosion and accretion trends during this period using agglomerative hierarchical clustering approach. Erosion and accretion were found variable over time and space, and periodic reversal of status was also noticed in many places. Estimates of erosion were evaluated against field-survey based data, and found reasonably accurate where the rates were relatively great. Smoothing of shoreline datasets was found desirable as its impacts on the estimates remained within tolerable limits.

  2. Risk factors for glenoid erosion in patients with shoulder hemiarthroplasty: an analysis of 118 cases.

    Science.gov (United States)

    Herschel, Ramin; Wieser, Karl; Morrey, Mark E; Ramos, Carlos H; Gerber, Christian; Meyer, Dominik C

    2017-02-01

    Glenoid erosion is one of the main concerns in shoulder hemiarthroplasty. The goal of this study was to quantify glenoid erosion and to identify risk factors in patients with humeral hemiarthroplasty. There were 118 shoulders in 113 patients available for a standardized retrospective review. Erosion was graded as follows: grade 1, none; grade 2, mild (erosion into subchondral bone); grade 3, moderate (medialization of subchondral bone with hemispheric deformation); or grade 4, severe. The findings were then analyzed for confounding factors using a multivariate analysis. Mean follow-up was 31 months (range, 5-86 months). Negative predisposing factors for erosion were glenoid cysts (odds ratio, 5.4; P 50°) appeared to lead to local destruction of the cartilage. The degree of erosion did not correlate with age and glenoid or humeral head size. Only 1 patient (of 30) with a fracture-type prosthesis developed progressive glenoid erosion. In this series, favorable conditions for resistance to erosion after hemiarthroplasty were lack of glenoid cysts, intact glenoid cartilage, intact rotator cuff musculature, and a fracture situation. Age, the version of the glenoid, and the size of the prosthetic head showed no importance. The use of hemiarthroplasty seems to be associated with glenoid destruction in female patients with impending osteoarthritis, with rheumatoid arthritis, and if the head is implanted in a valgus position. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  3. Preliminary safety analysis methodology for the SMART

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-03-01

    This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

  4. A Preliminary Study on the Calculating Method for the Evolution of Siltation and Erosion of Tidal Flat Based on GIS

    Institute of Scientific and Technical Information of China (English)

    DU Jinglong; GAO Ang; YANG Shilun; ZHANG Wenxiang; ZHAO Huayun; LI Peng

    2005-01-01

    The estuary and coast is an area where the land and the sea interact and a place in which human beings frequently move about so that understanding and controlling the change and development modes of the coastal landform plays a vital part in exploiting and protecting coastal resources. A model is the generalization and abstraction of objective things. This paper summarizes four methods for the landform development of the tidal shore and underwater delta, mainly discusses the model's structural elements, and presents their specific application on the basis of the authors' case study. With the application of the profile model, the dynamic change of coastal landform can be clearly seen by contrasting the different profiles of different years.Through the shrinking, expanding and transformation of the isobath, plane model is used to study the macro-change of the shoal and the coastal landform. Speed model is an efficient means to analyze the trend of erosion and deposition and the local change in a great area of the sea. Statistical survey model is a static analysis, which can be used to establish the relationship between the erosion and deposition of the shoal and the altitude and slope of survey spot.

  5. Tooth erosion and eating disorders: a systematic review and meta-analysis.

    Directory of Open Access Journals (Sweden)

    Ana Paula Hermont

    Full Text Available BACKGROUND: Eating disorders are associated with the highest rates of morbidity and mortality of any mental disorders among adolescents. The failure to recognize their early signs can compromise a patient's recovery and long-term prognosis. Tooth erosion has been reported as an oral manifestation that might help in the early detection of eating disorders. OBJECTIVES: The aim of this systematic review and meta-analysis was to search for scientific evidence regarding the following clinical question: Do eating disorders increase the risk of tooth erosion? METHODS: An electronic search addressing eating disorders and tooth erosion was conducted in eight databases. Two independent reviewers selected studies, abstracted information and assessed its quality. Data were abstracted for meta-analysis comparing tooth erosion in control patients (without eating disorders vs. patients with eating disorders; and patients with eating disorder risk behavior vs. patients without such risk behavior. Combined odds ratios (ORs and a 95% confidence interval (CI were obtained. RESULTS: Twenty-three papers were included in the qualitative synthesis and assessed by a modified version of the Newcastle-Ottawa Scale. Fourteen papers were included in the meta-analysis. Patients with eating disorders had more risk of tooth erosion (OR = 12.4, 95%CI = 4.1-37.5. Patients with eating disorders who self-induced vomiting had more risk of tooth erosion than those patients who did not self-induce vomiting (OR = 19.6, 95%CI = 5.6-68.8. Patients with risk behavior of eating disorder had more risk of tooth erosion than patients without such risk behavior (Summary OR = 11.6, 95%CI = 3.2-41.7. CONCLUSION: The scientific evidence suggests a causal relationship between tooth erosion and eating disorders and purging practices. Nevertheless, there is a lack of scientific evidence to fulfill the basic criteria of causation between the risk behavior for eating disorders and tooth erosion.

  6. Soil erosion rates in rangelands of northeastern Patagonia: A dendrogeomorphological analysis using exposed shrub roots

    Science.gov (United States)

    Chartier, Marcelo Pablo; Rostagno, César Mario; Roig, Fidel Alejandro

    2009-05-01

    Soil erosion is an important process of land degradation in many rangelands and a significant driver of desertification in the world's drylands. Dendrogeomorphology is an alternative to traditional methods for determining soil erosion rate. Specifically, the vertical distance between the upper portion of exposed roots and the actual soil surface can be used as a bioindicator of erosion since plant establishment. In this study, we determined (i) the soil erosion rate from exposed roots of the dwarf shrub Margyricarpus pinnatus [Lam.] Kuntze in two ecological sites in the northeastern rangelands of Patagonia and (ii) the relationship between shrub age and upper root diameter. We selected two ecological sites, a pediment-like plateau and a flank pediment, where the dominant soils were Xeric Haplocalcids and Xeric Calciargids, respectively. The soil erosion rates in the pediment-like plateau and in the flank pediment were 2.4 and 3.1 mm yr - 1 , respectively. Data clearly indicate a high rate of soil erosion during the mean 8-year life span of the dwarf shrubs in degraded patches, which represent ~ 10% of surface cover in the study area. Simple linear regression analysis yielded a highly significant predictive model for age estimation of M. pinnatus plants using the upper root diameter as a predictor variable. The measurement of ground lowering against datable exposed roots represents a simple method for the determination of soil erosion rates. In combination with other soil surface features, it was used to infer the episodic nature of soil erosion. This approach could be particularly useful for monitoring the effects of land management practices on recent soil erosion and for the establishment of records in regions where historical data regarding this process are scarce or absent.

  7. Preliminary Analysis of Google+'s Privacy

    OpenAIRE

    2011-01-01

    In this paper we provide a preliminary analysis of Google+ privacy. We identified that Google+ shares photo metadata with users who can access the photograph and discuss its potential impact on privacy. We also identified that Google+ encourages the provision of other names including maiden name, which may help criminals performing identity theft. We show that Facebook lists are a superset of Google+ circles, both functionally and logically, even though Google+ provides a better user interfac...

  8. Comparative Analysis of the Soil Erosion in Hill Basins (Sasaus and Mislea

    Directory of Open Access Journals (Sweden)

    RALUCA ALEXANDRU

    2012-01-01

    Full Text Available The present study focuses on soil surface erosion a nd applying the Universal Soil Loss Equation with GIS techniques of spatial analysis on an area of two river basins. The erosion and the processes associated with it are studied with the help of digital terrain data and the USLE and RUSLE models are successfully applied within the ar ea. Soil surface erosion occurs when detachable soils on sufficiently steep slopes are exposed to o verland flow and/or the impact of rainfall. The Universal Soil Loss Equation (USLE predicts th e long term average annual rate of erosion on a field slope based on rainfall pattern, soil type, topography, crop system and management practices but does not however predict th e soil loss resulting from gully erosion. Five major factors are used to calculate the soil l oss for a given site. Each factor is the numerical estimation of a specific condition that affects the severity of soil erosion at a particular location

  9. Preliminary results of the study on wind erosion in the Qinghai-Tibetan Plateau using 137Cs technique

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The worldwide fallout of caesium-137 (137Cs) associated with the nuclear weapon tests during the 1950s and 1960s has provided a valuable man-made tracer for studies of soil erosion and sediment delivery. But relatively few researchers have used it to estimate wind erosion. In this note, the 137Cs technique is introduced into the studies of wind erosion and its modern processes in the Qinghai-Tibetan Plateau. Two 137Cs reference inventories of 982.11 and 2 376.04 Bq·m-2 were established preminarily, distributed in the south and middle-north parts of the studied area respectively. By analyzing the patterns of 137Cs depth profiles from sampling sites, the aeolian processes of erosion and deposition in nearly 40 years have been revealed, i.e. the shrub coppice dunes (S1) and semi-fixed dunefields (S3) experienced the alternation of erosion and deposition, while the grasslands (S4, S6 and S7) and dry farmlands (S5) suffered erosion only. By using 137Cs model, the average wind erosion rates for shrub coppice dune (S1), semi-fixed dune fields (S3), dry farmlands (S5) and grasslands (S4, S6 and S7) were estimated to be 84.14, 69.43, 30.68 and 21.84 t·ha-1·a-1 respectively, averaging 47.59 t·ha-1·a-1 for the whole plateau, which can be regarded as of the medium erosion standard. These results derived from 137Cs for the first time have significant implications for the further research of wind erosion and desertification control in the Qinghai-Tibetan Plateau.

  10. A quantitative analysis of rock cliff erosion environments

    Science.gov (United States)

    Lim, M.; Rosser, N.; Petley, D. N.; Norman, E. C.; Barlow, J.

    2009-12-01

    The spatial patterns and temporal sequencing of failures from coastal rock cliffs are complex and typically generate weak correlations with environmental variables such as tidal inundation, wave energy, wind and rain. Consequently, understanding of rock cliff behaviour, its response to predicted changes in environmental forcing and, more specifically, the interaction between marine and climatic factors in influencing failure processes has remained limited. This work presents the results from the first attempt to characterise and quantify the conditions on coastal cliffs that lead to accelerated rates of material detachment. The rate of change in an 80 m high section of coastal rock cliffs has been surveyed annually with high-resolution terrestrial laser scanning (TLS). The rockfall data have been analysed according to a simplified source geology that exhibit distinct magnitude-frequency distributions relating to the dominance of particular failure types. An integrated network of sensors and instrumentation designed to reflect the lithological control on failure has been installed to examine both the distinction between prevailing conditions and those affecting the local cliff environment and the physical response of different rock types to micro-climatic processes. The monitoring system records near-surface rock strain, temperature, moisture and micro-seismic displacement in addition to air temperature, humidity, radiation, precipitation, water-level and three-dimensional wind characteristics. A characteristic environmental signal, unique to the cliff face material, has been identified that differs substantially from that experienced by the surrounding area; suggesting that established methods of meteorological and tidal data collection are insufficient and inappropriate to represent erosive processes. The interaction between thermo- and hydro-dynamics of the cliff environment and the physical response of the rock highlights the composite environmental effects

  11. Numerical simulation and factor analysis of petrochemical pipe erosion-corrosion failure

    Science.gov (United States)

    XU, G. F.; OU, G. F.; Chen, T.; Li, P. X.; JIN, H. Z.

    2016-05-01

    Based on the behavior of carbon steel outlet tube in REAC pipes of Zhenhai Refining & Chemical Company, the mathematical model of fluid-solid interaction was established according to the mechanism of erosion-corrosion damage. The interaction between corrosion products protecting film and multiphase liquid was analyzed by numerical simulation method. The distribution of shearing stress on the inwall of elbow bend, and the distribution of principal displacement, stress and strain of corrosion products protecting film were disclosed, while the erosion-corrosion failure processes was studied. The simulation result coincides with that of the positioned thickness gauging which validated the reliability and feasibility of the finite element analysis software simulation method. The obtained results can be used in the erosion-corrosion failure analysis, structural optimization, in-service testing positioning, life prediction, risk assessment, safety and other security projects for multiphase flow pipeline.

  12. Runoff erosion

    OpenAIRE

    Evelpidou, Niki; Cordier, Stephane; Merino, Agustin (Ed.); Figueiredo, Tomás; Centeri, Csaba

    2013-01-01

    Table of Contents PART I – THEORY OF RUNOFF EROSION CHAPTER 1 - RUNOFF EROSION – THE MECHANISMS CHAPTER 2 - LARGE SCALE APPROACHES OF RUNOFF EROSION CHAPTER 3 - MEASURING PRESENT RUNOFF EROSION CHAPTER 4 - MODELLING RUNOFF EROSION CHAPTER 5 - RUNOFF EROSION AND HUMAN SOCIETIES: THE INFLUENCE OF LAND USE AND MANAGEMENT PRACTICES ON SOIL EROSION PART II - CASE STUDIES CASE STUDIES – INTRODUCTION: RUNOFF EROSION IN MEDITERRANEAN AREA CASE STUDY 1: Soil Erosion Risk...

  13. Preliminary Hazards Analysis Plasma Hearth Process

    Energy Technology Data Exchange (ETDEWEB)

    Aycock, M.; Coordes, D.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1993-11-01

    This Preliminary Hazards Analysis (PHA) for the Plasma Hearth Process (PHP) follows the requirements of United States Department of Energy (DOE) Order 5480.23 (DOE, 1992a), DOE Order 5480.21 (DOE, 1991d), DOE Order 5480.22 (DOE, 1992c), DOE Order 5481.1B (DOE, 1986), and the guidance provided in DOE Standards DOE-STD-1027-92 (DOE, 1992b). Consideration is given to ft proposed regulations published as 10 CFR 830 (DOE, 1993) and DOE Safety Guide SG 830.110 (DOE, 1992b). The purpose of performing a PRA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PRA then is followed by a Preliminary Safety Analysis Report (PSAR) performed during Title I and II design. This PSAR then leads to performance of the Final Safety Analysis Report performed during construction, testing, and acceptance and completed before routine operation. Radiological assessments indicate that a PHP facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous material assessments indicate that a PHP facility will be a Low Hazard facility having no significant impacts either onsite or offsite to personnel and the environment.

  14. PROFILE ANALYSIS OF STANDARD TEETH WEAR IN PEOPLE SUFFERING FROM BRUXISM AND ITS RELATIONSHIP WITH DENTAL EROSION: A LONGITUDINAL ANALYSIS

    OpenAIRE

    Bonato, Letícia Ladeira; Universidade Federal Fluminense; Bastos, Flávia de Souza; Universidade Federal de Juiz de Fora; Meireles, Agnes Batista; Universidade Federal de Minas Gerais; de Ávila, Renato Françoso; Instituto Federal de Educação, Ciência e Tecnologia (Campus Juiz de Fora); GUIMARÃES,Josemar Parreira

    2015-01-01

    Although teeth wear is a physiological process, bruxism or teeth grinding is indicated as the sole etiological factor involved, without taking into consideration other wear processes, such as erosion and abrasion. Current descriptive and longitudinal analysis evaluates the surface roughness in teeth as dental wear standard in females diagnosed with acid erosion or attrition. Sample comprised 20 females, aged between 20 and 50 years old, divided into Group A (n=9) characterized by teeth grindi...

  15. Multi-scale analysis of soil erosion dynamics in Kwazulu-natal, South Africa

    NARCIS (Netherlands)

    Sonneveld, M.P.W.; Everson, T.M.; Veldkamp, A.

    2005-01-01

    For a case study area in the Okhombe catchment in the province of KwaZulu-Natal, South Africa, a multi-scale analysis of soil erosion dynamics was performed. At sub-catchment level, the dynamics of erosional features were investigated by means of aerial photographs. At site level, the changes in soi

  16. Morphological and mineral analysis of dental enamel after erosive challenge in gastric juice and orange juice.

    Science.gov (United States)

    Braga, Sheila Regina Maia; De Faria, Dalva Lúcia Araújo; De Oliveira, Elisabeth; Sobral, Maria Angela Pita

    2011-12-01

    This study evaluated and compared in vitro the morphology and mineral composition of dental enamel after erosive challenge in gastric juice and orange juice. Human enamel specimens were submitted to erosive challenge using gastric juice (from endoscopy exam) (n = 10), and orange juice (commercially-available) (n = 10), as follows: 5 min in 3 mL of demineralization solution, rinse with distilled water, and store in artificial saliva for 3 h. This cycle was repeated four times a day for 14 days. Calcium (Ca) loss after acid exposure was determined by atomic emission spectroscopy. The presence of carbonate (CO) and phosphate (PO) in the specimens was evaluated before and after the erosive challenge by FT-Raman spectroscopy. Data were tested using t-tests (P enamel was observed in scanning electron microscopy (SEM). The mean loss of Ca was: 12.74 ± 3.33 mg/L Ca (gastric juice) and 7.07 ± 1.44 mg/L Ca (orange juice). The analysis by atomic emission spectroscopy showed statistically significant difference between erosive potential of juices (P = 0.0003). FT-Raman spectroscopy found no statistically significant difference in the ratio CO/PO after the erosive challenge. The CO/PO ratios values before and after the challenge were: 0.16/0.17 (gastric juice) (P = 0.37) and 0.18/0.14 (orange juice) (P = 0.16). Qualitative analysis by SEM showed intense alterations of enamel surface. The gastric juice caused more changes in morphology and mineral composition of dental enamel than orange juice. The atomic emission spectroscopy showed to be more suitable to analyze small mineral loss after erosive challenge than FT-Raman. Copyright © 2011 Wiley Periodicals, Inc.

  17. Repository Subsurface Preliminary Fire Hazard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Richard C. Logan

    2001-07-30

    This fire hazard analysis identifies preliminary design and operations features, fire, and explosion hazards, and provides a reasonable basis to establish the design requirements of fire protection systems during development and emplacement phases of the subsurface repository. This document follows the Technical Work Plan (TWP) (CRWMS M&O 2001c) which was prepared in accordance with AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities''; Attachment 4 of AP-ESH-008, ''Hazards Analysis System''; and AP-3.11Q, ''Technical Reports''. The objective of this report is to establish the requirements that provide for facility nuclear safety and a proper level of personnel safety and property protection from the effects of fire and the adverse effects of fire-extinguishing agents.

  18. Gis-supported Analysis of Slope Processes and Soil Erosion In The Terraced Uplands of Yemen

    Science.gov (United States)

    Dresen, M.; Rappold, G.

    The mountain ranges of Yemen form part of a unique agricultural landscape with land use terraces. The increasing abandonment of these terraces in the last decades causes serious problems of land degradation due to soil erosion processes, increasing runoff and debris flows. Especially in the study area within the southern uplands, close to the former border between northern and southern Yemen intensive rain and hail storms occur during the rainy season. These cause strong damage to the terraces and induce mass movements in deeply weathered upper slopes. The absence of extensive climatic and topographic data for most parts of the country reduce the possibilities of a complex, process-oriented analysis of slope processes and soil erosion. Remote sensing and GIS techniques are essential for the selection of land use structures and terrain parameters and enable the modelling of soil movement through the integration of short-term climatic data (extreme rainfall events). The study evaluates different methods for the analysis of soil erosion and debris flow risks in the absence of existing erosion or hydrologic models.

  19. Empirical Projection of Long-Term Coastal Erosion Hazards in Hawaii Under Rising Sea Levels: Preliminary Findings

    Science.gov (United States)

    Anderson, T. R.; Barbee, M.; Fletcher, C. H., II; Romine, B. M.; Lemmo, S.

    2014-12-01

    Chronic erosion dominates sandy beaches of Hawaii causing loss and beach narrowing; and damaging homes, infrastructure, and critical habitat. Increased rates of sea level rise (SLR) will likely exacerbate these problems. Shoreline managers and other stakeholders need guidance to support long-range planning and adaptation efforts. Despite recent advances in sophisticated numerical models, there remains a need for simple approaches to estimating land areas that are threatened by erosion on decadal-to-century time scales due to SLR. While not as detailed as numerical models, empirical approaches can provide a first-order approximation to shoreline change that may be useful for coastal management and planning. Shoreline managers in Hawaii commonly work with historical data to provide information on coastal erosion. Simple linear regression methods have been especially attractive in Hawaii, where complex reef topography can cause high spatial variability in sediment transport patterns. Yet, facing projected future increases in the rate of SLR, extrapolating historical trends is insufficient. Predictions of shoreline change with SLR commonly employ controversial geometric models (e.g., the Bruun Model) that do not account for sediment availability and alongshore variability captured in historical data. Furthermore, these two projections often produce conflicting results. We report here on the early results of mapping probability-based erosion hazard areas, determined by combining the extrapolated historical shoreline change model with a geometric model of shoreline response (Davidson-Arnott, 2005) to strictly accelerated SLR. A geographic information system is used to explore the intersection between potential erosion hazards, coastal geology, and development patterns. This approach is attractive because it is simple and utilizes existing datasets. Yet, its simplicity implies broad assumptions of the coastal system and leads to large uncertainty in projections. To

  20. Analysis, simulation and modeling of atmospheric stratification erosion with lumped parameter codes; Analyse, Simulation und Modellierung der Erosion atmosphaerischer Schichtungen mit Lumped Parameter-Codes

    Energy Technology Data Exchange (ETDEWEB)

    Burkhardt, Joerg

    2013-07-01

    The courses and consequences of severe accidents in nuclear power plants are usually simulated with the help of so called Lumped Parameter-Codes which are especially designed for this purpose. These codes are able to simulate complex physical phenomena within short computing times since they are based on a simplified zone principle. Furthermore they are provided with a simplified flow model basis. This dissertation aims at the ability of the German Containment Code System (COCOSYS) to simulate local accumulations of hydrogen. During severe accidents with a melting reactor core (as in Harrisburg or Fukushima) hydrogen can be generated and then be released to the containment. In case of a local accumulation a detonation can occur that endangers the buildings integrity. The results show that the development and the erosion of these hydrogen accumulations based on bouant flows are qualitatively well simulated. From a systematic grid study general rules concerning the simulation of the stratification erosion have been derivated. Those have been applied and confirmed by several blind code-benchmarks. A detailed analysis has shown that the simulated erosion rate and the resistance of simulated hydrogen accumulations are directly related to the grid discretisation chosen by the user. Based upon this analysis a model concept has been developed, which is able to detect hydrogen accumulations and to determine their intensity of interaction with impinging flows by non-dimensional numbers. The erosion flow is controlled by adjusting local grid effects. The model is in the development phase.

  1. Analysis of shallow landslides and soil erosion induced by rainfall over large areas

    Science.gov (United States)

    Cuomo, Sabatino; Della Sala, Maria

    2014-05-01

    Due to heavy rainstorms, steep hillslopes may be affected by either shallow landslides or soil superficial erosion (Acharya et al., 2011), which originate different flow-like mass movements in adjacent or overlapping source areas (Cascini et al., 2013). Triggering analysis (Cascini et al., 2011) is a relevant issue for hazard assessment that is, in turn, the first step of risk analysis procedures (Fell et al., 2008). Nevertheless, the available approaches separately consider shallow landslides and soil erosion. Specifically, quantitative models for landslides triggering analysis allow simulating the physical processes leading to failure such as pore water pressure increase and soil shear mobilization and provide estimates of the amount of material potentially involved; however, success of quantitative methods must be carefully evaluated in complex geological setting as recently outlined (Sorbino et al., 2010) and further applications to real case histories are straightforward. On the other hand, a wide range of models exist for soil erosion analysis, which differ in terms of complexity, processes considered and data required for the model calibration and practical applications; in particular, quantitative models can estimate the source areas and the amount of eroded soil through empirical relationships or mathematical equations describing the main physical processes governing soil erosion (Merritt et al., 2003). In this work a spatially distributed analysis is proposed for testing the potentialities of two available models to respectively investigate the spatial occurrence of first-time shallow landslides and superficial soil erosion repeatedly occurring in a large test area of the Southern Italy. Both analyses take into account the seasonal variation of soil suction, rainfall characteristics and soil cover use (Cuomo and Della Sala, 2013). The achieved results show that the source areas of shallow landslides strongly depend on rainfall intensity and duration and

  2. RADIOCESIUM, BIOINDICATVE AND GEOSPATIAL ANALYSIS IN THE STUDY CONTEXT OF EROSION NETWORK OF THE ARABLE SLOPES

    Directory of Open Access Journals (Sweden)

    L. N. Trofimets

    2015-01-01

    Full Text Available Study of the relief transformation at arable lands becomes an actual problem due to the intensive use of interfluve sloped surfaces. This research examines the current state and dynamics of erosion network at arable slope in the upper Oka river basin. The riverbeds of modern streams are identified using the phytoindication analysis. The feature was detected out that these streams do not necessarily match with the ancient stream thalwegs. The radiocaesium analysis made it possible to show that soil washout magnitudes are comparable in the thalwegs of current and ancient streams, which are comparable in the length. Geomorphometric methods joined with the geoinformation analysis allow to quantify the role of current erosion network in transformation of the interfluve sloped surfaces relief.

  3. Preliminary evaluation of cavitation-erosion resistance of Ti-alloys in mercury for the Spallation Neutron Source

    Science.gov (United States)

    Pawel, S. J.; Mansur, L. K.

    2010-03-01

    A number of Ti-based alloys in both the mill-annealed and 20% cold-worked conditions were subjected to sonication conditions in Hg using a vibratory horn to assess relative cavitation-erosion resistance. Weight loss as a function of exposure time decreased monotonically with increasing hardness for all alloys/conditions examined, with Ti-6Al-4V (Grade 5) and Ti-6Al-2Sn-4Zr-2Mo yielding the best resistance to cavitation-erosion as evidenced by low weight losses and little or no tendency to form pits on the exposed surface. Unalloyed Ti (Grade 4) and Ti-0.12Pd (Grade 7) exhibited greater weight losses by a factor of about two and about five, respectively, with Ti-0.12Pd particularly prone to pitting development. The mean erosion rates of the best two Ti-alloys examined were about a factor of three higher than identically tested 316LN stainless steel following a low temperature carburizing treatment, but this difference is considered minor given that the rate for both materials is very low/manageable and represents a through-thickness property for the Ti-alloys. A nitriding surface treatment was also evaluated as a potential method to further increase the cavitation-erosion resistance of these alloys in Hg, but the selected treatment proved largely ineffective as measured by rapid weight loss. Recommendations for further work to evaluate the efficacy of Ti-based alloys for use in high-powered targets for the Spallation Neutron Source are given.

  4. Canonical correlation analysis of hydrological response and soil erosion under moving rainfall

    Institute of Scientific and Technical Information of China (English)

    Qi-hua RAN; Zhi-nan SHI; Yue-ping XU

    2013-01-01

    The impacts of rainfall direction on the degree of hydrological response to rainfall properties were investigated using comparative rainfall-runoff experiments on a small-scale slope (4 m×l m),as well as canonical correlation analysis (CCA).The results of the CCA,based on the observed data showed that,under conditions of both upstream and downstream rainfall movements,the hydrological process can be divided into instantaneous and cumulative responses,for which the driving forces are rainfall intensity and total rainfall,and coupling with splash erosion and wash erosion,respectively.The response of peak runoff (Pr) to intensity-dominated rainfall action appeared to be the most significant,and also runoff (R) to rainfall-dominated action,both for upstream-and downstream-moving conditions.Furthermore,the responses of sediment erosion in downstream-moving condition were more significant than those in upstream-moving condition.This study indicated that a CCA between rainfall and hydrological characteristics is effective for further exploring the rainfall-runoff-erosion mechanism under conditions of moving rainfall,especially for the downstream movement condition.

  5. TERRESTRIAL LASER SCANNER DATA TO SUPPORT COASTAL EROSION ANALYSIS: THE CONERO CASE STUDY

    Directory of Open Access Journals (Sweden)

    S. Calligaro

    2014-01-01

    Full Text Available In this work a detailed TLS survey was carried out in summer 2012, in the Conero Regional Park (Marche, province of Ancona, along the "spiaggia San Michele" and "spiaggia Sassi Neri". These areas present several sections affected by erosion, rock falls and slope failures. They also belong to a very prestigious place for tourism during the summer season; therefore, deriving a risk map for these areas is really useful. Thanks to the TLS survey, it was possible to obtain a centimetre resolution DTM covering a reach of about 1.5 km of the coast. This high resolution DTM was used to derive some primary topographic attributes that allowed to arrange a preliminary discussion about the likely unstable areas. These topographic information and results will also serve as the reference point for future yearly TLS surveys, which will absolutely help in recognizing any micro changes and slope failures, improving the risk maps.

  6. BASE Flexible Array Preliminary Lithospheric Structure Analysis

    Science.gov (United States)

    Yeck, W. L.; Sheehan, A. F.; Anderson, M. L.; Siddoway, C. S.; Erslev, E.; Harder, S. H.; Miller, K. C.

    2009-12-01

    The Bighorns Arch Seismic Experiment (BASE) is a Flexible Array experiment integrated with EarthScope. The goal of BASE is to develop a better understanding of how basement-involved foreland arches form and what their link is to plate tectonic processes. To achieve this goal, the crustal structure under the Bighorn Mountain range, Bighorn Basin, and Powder River Basin of northern Wyoming and southern Montana are investigated through the deployment of 35 broadband seismometers, 200 short period seismometers, 1600 “Texan” instruments using active sources and 800 “Texan” instruments monitoring passive sources, together with field structural analysis of brittle structures. The novel combination of these approaches and anticipated simultaneous data inversion will give a detailed structural crustal image of the Bighorn region at all levels of the crust. Four models have been proposed for the formation of the Bighorn foreland arch: subhorizontal detachment within the crust, lithospheric buckling, pure shear lithospheric thickening, and fault blocks defined by lithosphere-penetrating thrust faults. During the summer of 2009, we deployed 35 broadband instruments, which have already recorded several magnitude 7+ teleseismic events. Through P wave receiver function analysis of these 35 stations folded in with many EarthScope Transportable Array stations in the region, we present a preliminary map of the Mohorovicic discontinuity. This crustal map is our first test of how the unique Moho geometries predicted by the four hypothesized models of basement involved arches fit seismic observations for the Bighorn Mountains. In addition, shear-wave splitting analysis for our first few recorded teleseisms helps us determine if strong lithospheric deformation is preserved under the range. These analyses help lead us to our final goal, a complete 4D (3D spatial plus temporal) lithospheric-scale model of arch formation which will advance our understanding of the mechanisms

  7. Soil erosion evolution and spatial correlation analysis in a typical karst geomorphology using RUSLE with GIS

    Science.gov (United States)

    Zeng, Cheng; Wang, Shijie; Bai, Xiaoyong; Li, Yangbing; Tian, Yichao; Li, Yue; Wu, Luhua; Luo, Guangjie

    2017-07-01

    Although some scholars have studied soil erosion in karst landforms, analyses of the spatial and temporal evolution of soil erosion and correlation analyses with spatial elements have been insufficient. The lack of research has led to an inaccurate assessment of environmental effects, especially in the mountainous area of Wuling in China. Soil erosion and rocky desertification in this area influence the survival and sustainability of a population of 0.22 billion people. This paper analyzes the spatiotemporal evolution of soil erosion and explores its relationship with rocky desertification using GIS technology and the revised universal soil loss equation (RUSLE). Furthermore, this paper analyzes the relationship between soil erosion and major natural elements in southern China. The results are as follows: (1) from 2000 to 2013, the proportion of the area experiencing micro-erosion and mild erosion was at increasing risk in contrast to areas where moderate and high erosion are decreasing. The area changes in this time sequence reflect moderate to high levels of erosion tending to convert into micro-erosion and mild erosion. (2) The soil erosion area on the slope, at 15-35°, accounted for 60.59 % of the total erosion area, and the corresponding soil erosion accounted for 40.44 %. (3) The annual erosion rate in the karst region decreased much faster than in the non-karst region. Soil erosion in all of the rock outcrop areas indicates an improving trend, and dynamic changes in soil erosion significantly differ among the various lithological distribution belts. (4) The soil erosion rate decreased in the rocky desertification regions, to below moderate levels, but increased in the severe rocky desertification areas. The temporal and spatial variations in soil erosion gradually decreased in the study area. Differences in the spatial distribution between lithology and rocky desertification induced extensive soil loss. As rocky desertification became worse, the erosion

  8. Physically-based quantitative analysis of soil erosion induced by heavy rainfall on steep slopes

    Science.gov (United States)

    Della Sala, Maria; Cuomo, Sabatino; Novità, Antonio

    2014-05-01

    Heavy rainstorms cause either shallow landslides or soil superficial erosion in steep hillslopes covered by coarse unsaturated soils (Cascini et al., 2013), even over large areas (Cuomo and Della Sala, 2013a). The triggering stage of both phenomena is related to ground infiltration, runoff and overland flow (Cuomo and Della Sala, 2013), which are key processes to be investigated. In addition, the mobilization of solid particles deserves a proper physical-based modeling whether a quantitative estimation of solid particles discharge at the outlet of mountain basin is required. In this work, the approaches for soil superficial erosion analysis are firstly reviewed; then, a relevant case study of two medium-sized mountain basins, affected by flow-like phenomena with huge consequences (Cascini et al., 2009) is presented, which motivates a parametric numerical analysis with a physically-based model carried out for a wide class of soil properties and rainfall scenarios (Cuomo et al., 2013b). The achieved results outline that the peak discharge of water and solid particles driven by overland flow depends on rainfall intensity while volumetric solid concentration within the washout is related to the morphometric features of the whole mountain basin. Furthermore, soil suction is outlined as a key factor for the spatial-temporal evolution of infiltration and runoff in the basin, also affecting the discharge of water and solid particles at the outlet of the basin. Based on these insights, selected cases are analyzed aimed to provide a wide class of possible slope erosion scenarios. It is shown that, provided the same amount of cumulated rainfall, the sequence of high and low intensity rainfall events strongly affects the time-discharge at the outlet of the basin without significant variations of the maximum volumetric solid concentration. References Cascini, L., Cuomo, S., Ferlisi, S., Sorbino, G. (2009). Detection of mechanisms for destructive landslides in Campania region

  9. Dual-fuel, dual-throat engine preliminary analysis

    Science.gov (United States)

    Obrien, C. J.

    1979-01-01

    A propulsion system analysis of the dual fuel, dual throat engine for launch vehicle applications was conducted. Basic dual throat engine characterization data were obtained to allow vehicle optimization studies to be conducted. A preliminary baseline engine system was defined.

  10. Lunar Sinuous Rilles: Analysis of Morphology, Topography, and Mineralogy, and Implications for a Thermal Erosion Origin

    Science.gov (United States)

    Hurwitz, D. M.; Head, J. W.; Wilson, L.

    2009-12-01

    erosion as an origin for sinuous rilles and to distinguish between those features associated with thermal erosion and those formed by other processes. Our initial studies have focused on Rima Hadley and Rima Prinz and also include sinuous rilles observed on the Aristarchus Plateau and in other lunar regions. Topographic profiles were collected for Rima Hadley and Rima Prinz using high resolution Apollo orthotopographic maps (1:50,000). Hadley Rille is characterized by a v-shaped channel <1.5 km wide and ~300 m deep, and the channel has smooth, rimless edges and an uphill slope of 2.7 m/km. Rima Prinz is characterized by a u-shaped channel <2 km wide and 150 m deep, and the channel also has smooth, rimless edges and a downward slope of 5.7 m/km. The rimless margins of these sinuous rilles support a thermally erosive origin, though further analysis of these characteristics will better constrain interpretations of the origin of sinuous rilles. References: [1] Hulme, G., 1973, Mod. Geol., 4, 107-117 [2] Carr, M. H., 1974, Icarus, 22, 1-23 [3] Williams, D. A., et al., 2000, JGR, 105, 20,189-20,205 [4] Head, J. W. and Wilson, L., 1980, 11th LPSC, 426-427 [5] Wilson, L. and Head, J. W., 1980, 11th LPSC, 1260-1262.

  11. Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release

    OpenAIRE

    Rakhmatullina, Ekaterina; Bossen, Anke; Höschele, Christoph; Wang, Xiaojie; Beyeler, Barbara; Meier, Christoph; Lussi, Adrian

    2011-01-01

    We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration w...

  12. Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release

    OpenAIRE

    Rakhmatullina, Ekaterina; Bossen, Anke; Höschele, Christoph; Wang, Xiaojie; Beyeler, Barbara; Meier, Christoph; Lussi, Adrian

    2011-01-01

    We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration w...

  13. LIDAR data to support coastal erosion analysis: the Conero study case

    Science.gov (United States)

    Calligaro, Simone; Sofia, Giulia; Guarnieri, Alberto; Tarolli, Paolo

    2013-04-01

    In the last decades, the topic of coastal erosion and the derived risk have been subject of a growing interest for public authorities and researchers. Recent major natural events, such as hurricanes, tsunamis, and sea level rising, called the attention of media and society, underlining serious concerns about such problems. In a high-density populated country such as Italy, where tourism is one of the major economic activities, the coastal erosion is really a critical issue. In April 2010, along a reach of the coast of Ventotene Island, two young students tragically died, killed by a rock fall. This event dramatically stressed public authorities about the effectiveness of structural and non-structural measures for the mitigation of such phenomena. It is clear that an improving of the actual knowledge about coastal erosion is needed, especially to monitor such events and to set alert systems. In the last few years, airborne LIDAR technology led to a dramatic increase in terrain information. Airborne LiDAR and Terrestrial Laser Scanner (TLS) derived high-resolution Digital Terrain Models (DTMs) have opened avenues for hydrologic and geomorphologic studies (Tarolli et al., 2009). In general, all the main surface processes signatures are correctly recognized using a DTM with cell sizes of 1 m. Having said that, some sub-meter grid sizes may be more suitable in those situations where the analysis of micro topography related to micro changes due to slope failures is critical for risk assessment, and the Terrestrial Laser Scanner (TLS) has been proven to be a useful tool for such detailed field survey. The acquired elevation data with TLS allow to derive a centimeters high quality DTMs. The possibility to detect in detail the slope failures signatures results in a better understanding and mapping of the erosion susceptibility, and of those areas where slope failures are more likely to happen. In addition, these information can be also considered as the basis to develop

  14. Analysis of the erosive effect of different dietary substances and medications

    OpenAIRE

    Lussi, Adrian; Megert, Brigitte; Peter Shellis, Robert; Wang, Xiaojie

    2012-01-01

    Excessive consumption of acidic drinks and foods contributes to tooth erosion. The aims of the present in vitro study were twofold: (1) to assess the erosive potential of different dietary substances and medications; (2) to determine the chemical properties with an impact on the erosive potential. We selected sixty agents: soft drinks, an energy drink, sports drinks, alcoholic drinks, juice, fruit, mineral water, yogurt, tea, coffee, salad dressing and medications. The erosive potential of th...

  15. [Tuscan Chronic Care Model: a preliminary analysis].

    Science.gov (United States)

    Barbato, Angelo; Meggiolaro, Angela; Rossi, Luigi; Fioravanti, C; Palermita, F; La Torre, Giuseppe

    2015-01-01

    the aim of this study is to present a preliminary analysis of efficacy and effectiveness of a model of chronically ill care (Chronic Care Model, CCM). the analysis took into account 106 territorial modules, 1016 General Practitioners and 1,228,595 patients. The diagnostic and therapeutic pathways activated (PDTA), involved four chronic conditions, selected according to the prevalence and incidence, in Tuscany Region: Diabetes Mellitus (DM), Heart Failure (SC), Chronic Obstructive Pulmonary Disease (COPD) and stroke. Six epidemiological indicators of process and output were selected, in order to measure the model of care performed, before and after its application: adherence to specific follow-up for each pathology (use of clinical and laboratory indicators), annual average of expenditure per/capita/euro for diagnostic tests, in laboratory and instrumental, average expenditure per/capita/year for specialist visits; hospitalization rate for diseases related to the main pathology, hospitalization rate for long-term complications and rate of access to the emergency department (ED). Data were collected through the database; the differences before and after the intervention and between exposed and unexposed, were analyzed by method "Before-After (Controlled and Uncontrolled) Studies". The impact of the intervention was calculated as DD (difference of the differences). DM management showed an increased adhesion to follow-up (DD: +8.1%), and the use of laboratory diagnostics (DD: +4,9 €/year/pc), less hospitalization for long-term complications and for endocrine related diseases (DD respectively: 5.8/1000 and DD: +1.2/1000), finally a smaller increase of access to PS (DD: -1.6/1000), despite a slight increase of specialistic visits (DD: +0,38 €/year/pc). The management of SC initially showed a rising adherence to follow-up (DD: +2.3%), a decrease of specialist visits (DD:E 1.03 €/year/pc), hospitalization and access to PS for exacerbations (DD: -4.4/1000 and DD: -6

  16. Comparative analysis of soil erosion sensitivity using various quantizations within GIS environment

    NARCIS (Netherlands)

    Paparrizos, Spyridon; Maris, Fotios; Kitikidou, Kyriaki; Anastasiou, Theofilos; Potouridis, Simeon

    2015-01-01

    Soil erosion is a prominent cause of land degradation and desertification in Mediterranean countries. The detrimental effects of soil erosion are exemplified in climate (in particular climate change), topography, human activities and natural disasters. Modelling of erosion and deposition in compl

  17. Plot-scale testing and sensitivity analysis of Be7 based soil erosion conversion models

    Science.gov (United States)

    Taylor, Alex; Abdelli, Wahid; Barri, Bashar Al; Iurian, Andra; Gaspar, Leticia; Mabit, Lionel; Millward, Geoff; Ryken, Nick; Blake, Will

    2016-04-01

    Over the past 2 decades, a growing number of studies have recognised the potential for short-lived cosmogenic Be-7 (half-life 53 days) to be used as a tracer to evaluate soil erosion from short-term inter-rill erosion to hillslope sediment budgets. While conversion modelling approaches are now established for event-scale and extended-time-series applications, there is a lack of validation and sensitivity analysis to underpin confidence in their use across a full range of agro-climatic zones. This contribution aims to close this gap in the context of the maritime temperate climate of southwest UK. Two plots of 4 x 35 m were ploughed and tilled at the beginning of winter 2013/2014 in southwest UK to create (1) a bare, sloped soil surface and (2) a bare flat reference site. The bounded lower edge of the plot fed into a collection bin for overland flow and associated sediment. The tilled surface had a low bulk density and high permeability at the start of the experiment (ksat > 100 mm/hr). Hence, despite high rainfall in December (200 mm), notable overland flow was observed only after intense rain storms during late 2013 and early January 2014 when the soil profile was saturated i.e. driven by Saturation Overland Flow (SOF). At the time of SOF initiation, ca. 70% of the final Be-7 inventory had been delivered to the site. Subsequent to a series SOF events across a 1 month period, the plot soil surface was intensively sampled to quantify Be-7 inventory patterns and develop a tracer budget. Captured eroded sediment was dried, weighed and analysed for Be-7. All samples were analysed for particle size by laser granulometry. Be-7 inventory data were converted to soil erosion estimates using (1) standard profile distribution model, (2) the extended time series distribution model and (3) a new 'antecedent rainfall' extended time series model to account for lack of soil erosion prior to soil saturation. Results were scaled up to deliver a plot-scale sediment budget to include

  18. Evaluation of soil erosion as a basis of sediment yield in mountainous catchments: a preliminary study in the River Douro Basin (Northern Portugal)

    Science.gov (United States)

    Reis, Anabela; Martinho Lourenço, José M.; Parker, Andrew; Alencoão, Ana

    2013-04-01

    The River Corgo drains a meso-scale mountainous rural catchment with an area of 295 km2, underlain by crystalline rocks, in a temperate climate, which integrates the transboundary River Douro Basin, in the northeast of Portugal. A geochemical survey on oxic fluvial sediments of the river network shows considerable contents of metals associated to the finer particles (soils and weathering products. Moreover, taking into account the hydrological pattern of the catchment, the seasonal and spatial variability of metal contents associated to the sediments suggests that the control of metal in the sediments by their mineralogical, geochemical and physical properties is governed primarily at the level of the basin soils system, especially in the Wet Period, when the sediments are frequently remobilised (Reis, 2010). Although the soil particles are a common pathway of transport and entrance of metals in the fluvial network by runoff derived erosion, this mechanism is naturally more marked in mountainous catchments. Modelling sediment and adsorbed contaminant transport within catchments can help to identify possible contaminant sources, as well as to estimate the delivered quantities of eroded material and associated contaminants. In catchments with the described morphological features, monitoring the transport of sediments poses some issues concerning: (a) the low mass yield of suspended sediment from river water, under low-flow conditions; (b) the maintenance of the sediment sampler's devices in the streams, in periods of high-flow or storm events. This study describes the preliminary results of a GIS-based mass balance model of overland sediment transport to the River. The erosion, the first step of sediment transport, was estimated by an empirical model - The Universal Soil Loss Equation (USLE). The objective was to construct a GIS based potential soil loss spatial index model and posteriorly estimate the sediment yield for different locations within the catchment. The

  19. Asphaltene Erosion Process in Air Plasma: Emission Spectroscopy and Surface Analysis for Air-Plasma Reactions

    Institute of Scientific and Technical Information of China (English)

    H. MARTINEZ; O. FLORES; J. C. POVEDA; B. CAMPILLO

    2012-01-01

    Optical emission spectroscopy (OES) was applied for plasma characterization during the erosion of asphaltene substrates. An amount of 100 mg of asphaltene was carefully applied to an electrode and exposed to air-plasma glow discharge at a pressure of 1.0 Torr. The plasma was generated in a stainless steel discharge chamber by an ac generator at a frequency of 60 Hz, output power of 50 W and a gas flow rate of 1.8 L/min. The electron temperature and ion density were estimated to be 2.15±0.11 eV and (1.24±0.05)× 10^16 m^-3, respectively, using a double Langmuir probe. OES was employed to observe the emission from the asphaltene exposed to air plasma. Both molecular band emission from N2, N2+, OH, CH, NH, O2 as well as CN, and atomic light emission from V and Hγ were observed and used to monitor the evolution of asphaltene erosion. The asphaltene erosion was analyzed with the aid of a scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) detector. The EDX analysis showed that the time evolution of elements C, O, S and V were similar and the chemical composition of the exposed asphaltenes remained constant. Particle size evolution was measured, showing a maximum size of 2307 μm after 60 min. This behavior is most likely related to particle agglomeration as a function of time.

  20. Quantification and multivariate analysis of water erosion in the Mediterranean region. A case study of the Isser basin. northern Algeria

    Science.gov (United States)

    Zeggane, Houari; Boutoutaou, Djamel

    2016-07-01

    In the Mediterranean region, the specifisity of erosion stems from a particularly contrasted climate, drought, and from summer and autumn severe thunderstorms. The process of erosion generates substantial loss of soil and affects any kind of crop. The adopted approach aims to establish regression models in order to highlight the relationship between solid and liquid flows at four measurement stations in the Isser catchement area, northern Ageria. The Power Model seems to explain this relationship. The quantification and temporal analysis of solid matter transport showed that the rates of erosion are high along the study area. The annual mean solid matter transport for the whole basin is about 2 200 t/km2.year, of which the main part is recorded in autumn during peak flows. The different factors involved in the process of water erosion are determined in advance in order to establish a model between the predictand variable, which is the specific erosion, and other predictors. Besides, a functional relationship has been highlighted between water erosion and the mean slope, the drainage density and the lithology index.

  1. Preliminary results of {sup 1}37 Cs activity in a soil erosion toposequence in cuenca (castilla la mancha, central spain)

    Energy Technology Data Exchange (ETDEWEB)

    Bienes, R.; Alvarez, A.; Jimenez-Ballesta, R.

    2009-07-01

    The soil redistribution due to the conventional tillage practices represents a very severe process of soil erosion and degradation in Mediterranean agricultural lands. The existing methods for soil erosion assessment can be grouped into two main categories: erosion modelling and prediction methods and erosion measurement methods. The use of environmental radionuclides, in particular {sup 1}37 Cs, overcomes many of the limitations associated with traditional approaches and has been shown as an effective way of studying erosion and deposition. Its determination and the study of the characters of soils in a sequence permits know the control of the erosion. The objective of this study was to determine the soil erosion rates using {sup 1}37 Cs activities concentrations in a typical Mediterranean environment; the Chillaron basin (Cuenca, Castilla La Mancha, Spain). (Author) 9 refs.

  2. Time compression of soil erosion by the effect of largest daily event. A regional analysis of USLE database.

    Science.gov (United States)

    Gonzalez-Hidalgo, J. C.; Batalla, R.; Cerda, A.; de Luis, M.

    2009-04-01

    When Thornes and Brunsden wrote in 1977 "How often one hears the researcher (and no less the undergraduate) complain that after weeks of observation "nothing happened" only to learn that, the day after his departure, a flood caused unprecedent erosion and channel changes!" (Thornes and Brunsden, 1977, p. 57), they focussed on two different problems in geomorphological research: the effects of extreme events and the temporal compression of geomorphological processes. The time compression is one of the main characteristic of erosion processes. It means that an important amount of the total soil eroded is produced in very short temporal intervals, i.e. few events mostly related to extreme events. From magnitude-frequency analysis we know that few events, not necessarily extreme by magnitude, produce high amount of geomorphological work. Last but not least, extreme isolated events are a classical issue in geomorphology by their specific effects, and they are receiving permanent attention, increased at present because of scenarios of global change. Notwithstanding, the time compression of geomorphological processes could be focused not only on the analysis of extreme events and the traditional magnitude-frequency approach, but on new complementary approach based on the effects of largest events. The classical approach define extreme event as a rare event (identified by its magnitude and quantified by some deviation from central value), while we define largest events by the rank, whatever their magnitude. In a previous research on time compression of soil erosion, using USLE soil erosion database (Gonzalez-Hidalgo et al., EGU 2007), we described a relationship between the total amount of daily erosive events recorded by plot and the percentage contribution to total soil erosion of n-largest aggregated daily events. Now we offer a further refined analysis comparing different agricultural regions in USA. To do that we have analyzed data from 594 erosion plots from USLE

  3. DECIPHERING THE FINEST IMPRINT OF GLACIAL EROSION: OBJECTIVE ANALYSIS OF STRIAE PATTERNS ON BEDROCK

    Directory of Open Access Journals (Sweden)

    Piet Stroeven

    2011-05-01

    Full Text Available The aim of this study is to compare the efficiency of different mathematical and statistical geometrical methods applied to characterise the orientation distribution of striae on bedrock for deciphering the finest imprint of glacial erosion. The involved methods include automatic image analysis techniques of Fast Fourier Transform (FFT, and the experimental investigations by means of Saltikov's directed secants analysis (rose of intersection densities, applied to digital and analogue images of the striae pattern, respectively. In addition, the experimental data were compared with the modelling results made on the basis of Underwood's concept of linear systems in a plane. The experimental and modelling approaches in the framework of stereology yield consistent results. These results reveal that stereological methods allow a reliable and efficient delineation of different families of glacial striae from a complex record imprinted in bedrock.

  4. Analysis of the Effect of Surface Modification on Polyimide Composites Coated with Erosion Resistant Materials

    Science.gov (United States)

    Ndalama, Tchinga; Hirschfeld, Deidre; Sutter, James K. (Technical Monitor)

    2003-01-01

    The aim of this research is to enhance performance of composite coatings through modification of graphite-reinforced polyimide composite surfaces prior to metal bond coat/ hard topcoat application for use in the erosive and/or oxidative environments of advanced engines. Graphite reinforced polyimide composites, PMR-15 and PMR-II-50, formed by sheet molding and pre-pregging will be surface treated, overlaid with a bond coat and then coated with WC-Co. The surface treatment will include cleaning, RF plasma or ultraviolet light- ozone etching, and deposition of SiO(x) groups. These surface treatments will be studied in order to investigate and improve adhesion and oxidation resistance. The following panels were provided by NASA-Glenn Research Center(NASA-GRC): Eight compression molded PMR-II-50; 6 x 6 x 0.125 in. Two vacuum-bagged PMR-II-50; 12 x 12 x 0.125 in. Eight compression molded PMR-15; 6 x 6 x 0.125 in. One vacuum-bagged PMR-15; 12 x 12 x 0.125 in. All panels were made using a 12 x 12 in. T650-35 8HS (3K-tow) graphite fabric. A diamond-wafering blade, with deionized water as a cutting fluid, was used to cut PMR-II-50 and PMR-15 panels into 1 x 1 in. pieces for surface tests. The panel edges exhibiting delamination were used for the preliminary surface preparation tests as these would be unsuitable for strength and erosion testing. PMR-15 neat resin samples were also provided by NASA GRC. Surface profiles of the as-received samples were determined using a Dektak III Surface profile measuring system. Two samples of compression molded PMR-II-50 and PMR-15, vacuum-bagged PMR-II-50 and PMR-15 were randomly chosen for surface profile measurement according to ANSI/ASME B46.1. Prior to each measurement, the samples were blasted with compressed air to remove any artifacts. Five 10 mm-long scans were made on each sample. The short and long wavelength cutoff filter values were set at 100 and 1000 m, diamond stylus radius was 12.5 microns. Table 1 is a summary of the

  5. Diet influenced tooth erosion prevalence in children and adolescents: Results of a meta-analysis and meta-regression.

    Science.gov (United States)

    Salas, M M S; Nascimento, G G; Vargas-Ferreira, F; Tarquinio, S B C; Huysmans, M C D N J M; Demarco, F F

    2015-08-01

    The aim of the present study was to assess the influence of diet in tooth erosion presence in children and adolescents by meta-analysis and meta-regression. Two reviewers independently performed the selection process and the quality of studies was assessed. Studies published until May 2014 were identified in electronic databases: Pubmed, EBSHost, Scopus, Science direct, Web of Science and Scielo, using keywords. Criteria used included: observational studies, tooth erosion and diet, subject age range 8-19 years old, permanent dentition and index. Meta-analysis was performed and in case of heterogeneity a random-effects model was used. Thirteen studies that fulfilled the inclusion criteria were selected. Higher consumption of carbonated drinks (p=0.001) or acid snacks/sweets (p=0.01 and for acid fruit juices (p=0.03)) increased the odds for tooth erosion, while higher intake of milk (p=0.028) and yogurt (p=0.002) reduced the erosion occurrence. Heterogeneity was observed in soft drinks, confectionary and snacks and acidic fruit juices models. Methodological issues regarding the questionnaires administration and the inclusion of other variables, such as food groups and tooth brushing, explained partially the heterogeneity observed. Some dietary components (carbonated drinks, acid snacks/sweets and natural acidic fruits juice) increased erosion occurrence while milk and yogurt had a protective effect. Methods to assess diet could influence the homogeneity of the studies and should be considered during the study design. The method to assess diet should be carefully considered and well conducted as part of the clinical assessment of tooth erosion, since diet could influence the occurrence of tooth erosion. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Scenario analysis of Agro-Environment measure adoption for soil erosion protection in Sicilian vineyard (Italy)

    Science.gov (United States)

    Novara, Agata; Gristina, Luciano; Fantappiè, Maria; Costantini, Edoardo

    2014-05-01

    carbon content of the topsoil (averaged on the first 50 cm of soil depth) with the table published by Stone and Hilborn (2012). The slope-length and slope gradient (LS) factors were derived from the Digital Terrain Model of Sicily (20 x 20 m) using the formulas proposed by Wischmeier and Smith (1978), and revised by McCool et al. (1987 and 1989). The C factor were applied according previous studies in the same area and ranged among 0.22 and 0.12 and less than 0.10 using permanent species able to reduce erosion rate up to 90% (Gristina et al., 2006; Novara et al. 2011). The scenario analysis of the soil erosion reduction after the adoption of AEM could be used by policy makers as a base for the evaluation of the Payment for Ecosystem Service (PES) to be paid to farmers through the future Agro-Ecosystem measures incentives. Gristina, L., Bagarello, V., Ferro, V., Poma, I., 2006. Cover and management factor for Sicilian vineyard systems. In: 14th International Soil conservation Organization Conference—Water Management and Soil Conservation in Semi-arid Environments, 14-19 May 2006, Marrakech, Marocco (ISCO2006), pp. 1-4. A Novara, L Gristina, SS Saladino, A Santoro, A Cerda 2011 Soil erosion assessment on tillage and alternative soil managements in a Sicilian vineyard. Soil and Tillage Research 117, 140-147

  7. Urethral Stricture Outcomes After Artificial Urinary Sphincter Cuff Erosion: Results From a Multicenter Retrospective Analysis.

    Science.gov (United States)

    Gross, Martin S; Broghammer, Joshua A; Kaufman, Melissa R; Milam, Douglas F; Brant, William O; Cleves, Mario A; Dum, Travis W; McClung, Christopher; Jones, LeRoy A; Brady, Jeffrey D; Pryor, Michael B; Henry, Gerard D

    2017-06-01

    To evaluate the influence of both repair type and degree of cuff erosion on postoperative urethral stricture rate. Sparse literature exists regarding patient outcomes after artificial urinary sphincter (AUS) cuff erosion. Surgeons from 6 high-volume male continence centers compiled a comprehensive database of post-erosion patients to examine outcomes. This retrospective multi-institution study included 80 patients treated for AUS cuff erosions. Seventy-eight patients had specific information regarding post-cuff erosion urethral strictures. Erosion patients were categorized into 1 of 3 repair types at the time of explant surgery: catheter only, single-layer capsule-to-capsule repair (urethrorrhaphy), and formal urethroplasty. Operative notes and available medical records were extensively reviewed to collect study data. Twenty-five of 78 patients manifested a urethral stricture after AUS cuff erosion (32%). More strictures occurred among patients who underwent urethrorrhaphy (40% vs 29% for catheter only and 14% for urethroplasty). Stricture rates did not vary significantly by repair type (P = .2). Strictures occurred significantly more frequently in patients with complete cuff erosions (58%) as compared to partial erosions (25%, P = .037). A trend was detected regarding increased percentage of erosion correlating with increased stricture rate, but this did not reach statistical significance (P = .057). Partially eroded patients were more likely to undergo urethrorrhaphy repair (60%, P = .002). Urethral stricture was more likely to occur after complete cuff erosion as opposed to partial erosion in this multicenter retrospective population. Repair type, whether catheter only, urethrorrhaphy, or formal urethroplasty, did not appear to influence postoperative stricture rate. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Surface erosion and tritium inventory analysis for CIT (Compact Ignition Tokamak)

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, J.N. (Argonne National Lab., IL (USA)); Dylla, H.F. (Princeton Univ., NJ (USA). Plasma Physics Lab.); Pontau, A.E.; Wilson, K.L. (Sandia National Labs., Livermore, CA (USA))

    1990-09-01

    The expected buildup of co-deposited tritium on the CIT carbon divertor and first wall surfaces and operational methods of minimizing the inventory have been examined. The analysis uses impurity transport computer codes, and associated plasma and tritium retention models, to compute the thickness of redeposited sputtered carbon and the resulting co-deposited tritium inventory on the divertor plates and first wall. Predicted erosion/growth rates are dominated by the effect of gaps between carbon tiles. The overall results appear favorable, showing stable operation (finite self-sputtering) and acceptably low ({approximately}25 Ci/pulse) co-deposited tritium rates, at high surface temperature (1700{degree}C) design conditions. These results, however, are highly speculative due to serious model inadequacies at the high sputtering rates predicted. If stable operation is obtainable, the prospects appear good for adequate tritium inventory control via helium-oxygen glow discharge cleaning. 25 refs.

  9. Cavitation erosion prediction based on analysis of flow dynamics and impact load spectra

    Energy Technology Data Exchange (ETDEWEB)

    Mihatsch, Michael S., E-mail: michael.mihatsch@aer.mw.tum.de; Schmidt, Steffen J.; Adams, Nikolaus A. [Institute of Aerodynamics and Fluid Mechanics, Technische Universität München, Boltzmannstr. 15, D-85748 Garching (Germany)

    2015-10-15

    Cavitation erosion is the consequence of repeated collapse-induced high pressure-loads on a material surface. The present paper assesses the prediction of impact load spectra of cavitating flows, i.e., the rate and intensity distribution of collapse events based on a detailed analysis of flow dynamics. Data are obtained from a numerical simulation which employs a density-based finite volume method, taking into account the compressibility of both phases, and resolves collapse-induced pressure waves. To determine the spectrum of collapse events in the fluid domain, we detect and quantify the collapse of isolated vapor structures. As reference configuration we consider the expansion of a liquid into a radially divergent gap which exhibits unsteady sheet and cloud cavitation. Analysis of simulation data shows that global cavitation dynamics and dominant flow events are well resolved, even though the spatial resolution is too coarse to resolve individual vapor bubbles. The inviscid flow model recovers increasingly fine-scale vapor structures and collapses with increasing resolution. We demonstrate that frequency and intensity of these collapse events scale with grid resolution. Scaling laws based on two reference lengths are introduced for this purpose. We show that upon applying these laws impact load spectra recorded on experimental and numerical pressure sensors agree with each other. Furthermore, correlation between experimental pitting rates and collapse-event rates is found. Locations of high maximum wall pressures and high densities of collapse events near walls obtained numerically agree well with areas of erosion damage in the experiment. The investigation shows that impact load spectra of cavitating flows can be inferred from flow data that captures the main vapor structures and wave dynamics without the need for resolving all flow scales.

  10. Preliminary safety design analysis of KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Soo Dong; Kwon, Y. M.; Kim, K. D. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-03-01

    The national long-term R and D program updated in 1997 requires Korea Atomic Energy Research Institute(KAERI) to complete by the year 2006 the basic design of Korea Advanced Liquid Metal Reactor (KALIMER), along with supporting R and D work, with the capability of resolving the issue of spent fuel storage as well as with significantly enhanced safety. KALIMER is a 150 MWe pool-type sodium cooled prototype reactor that uses metallic fuel. The conceptual design is currently under way to establish a self consistent design meeting a set of the major safety design requirements for accident prevention. Some of current emphasis include those for inherent and passive means of negative reactivity insertion and decay heat removal, high shutdown reliability, prevention of and protection from sodium chemical reaction, and high seismic margin, among others. All of these requirements affect the reactor design significantly and involve supporting R and D programs of substance. This document first introduces a set of safety design requirements and accident evaluation criteria established for the conceptual design of KALIMER and then summarizes some of the preliminary results of engineering and design analyses performed for the safety of KALIMER. 19 refs., 19 figs., 6 tabs. (Author)

  11. Terrestrial Laser Scanning for Measuring Stream Bank Erosion within Legacy Sediments: Data Processing and Analysis Methods

    Science.gov (United States)

    Starek, M. J.; Mitasova, H.; Wegmann, K. W.

    2011-12-01

    Land clearing for agricultural purposes following European settlement of America resulted in upland erosion rates 50-400 times above long-term geologic rates in much of the North Carolina Piedmont region. A considerable amount of the eroded sediment was subsequently aggraded on floodplains and impounded in the slackwater ponds behind milldams. This trapped "legacy" sediment is commonly mistaken for natural floodplain deposition and has remained largely unrecognized as a potential source of accelerated sediment erosion contributing to modern water quality impairment. In this study, terrestrial laser scanning (TLS) is utilized to monitor stream bank evolution along a reach that has breached a former millpond. Due to the unique surface geometry and orientation of the stream bank, vegetation occlusion, and true 3D structure of the point cloud, a systematic data processing approach is implemented to compute the change in sediment volume between repeat TLS surveys. The processing approach consists of the following four steps: 1) segmentation of the stream bank point cloud; 2) transformation of the point cloud such that the xy plane is parallel to the trend of the bank; 3) filter vegetation by selecting local lowest point within a grid cell; 4) smooth high frequency noise 5) generate bare earth digital elevation model (DEM). From the DEMs, change in volume was quantified for a 13 m x 3.5 m section of the stream bank providing an estimate on erosion rates and slumping between surveys. The major mechanisms for the observed changes are freeze-thaw events and fluvial entrainment. To evaluate the surface evolution between the distinct sedimentary layers (legacy vs non-legacy) that comprise the stream bank, elevation change is modeled as a continuous trivariate function z = f(x,y,t) where x,y is horizontal location, t is time, and z is a first-surface referenced elevation. Hence, z=0 for all x,y at t=0, time of first survey. The filtered, transformed, and first

  12. Preliminary analysis of patent trends for magnetic fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, L.O.; Ashton, W.B.; Campbell, R.S.

    1984-02-01

    This study presents a preliminary analysis of development trends in magnetic fusion technology based on data from US patents. The research is limited to identification and description of general patent activity and ownership characteristics for 373 patents. The results suggest that more detailed studies of fusion patents could provide useful R and D planning information.

  13. Preliminary analysis of alternative fuel cycles for proliferation evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Steindler, M. J.; Ripfel, H. C.F.; Rainey, R. H.

    1977-01-01

    The ERDA Division of Nuclear Research and Applications proposed 67 nuclear fuel cycles for assessment as to their nonproliferation potential. The object of the assessment was to determine which fuel cycles pose inherently low risk for nuclear weapon proliferation while retaining the major benefits of nuclear energy. This report is a preliminary analysis of these fuel cycles to develop the fuel-recycle data that will complement reactor data, environmental data, and political considerations, which must be included in the overall evaluation. This report presents the preliminary evaluations from ANL, HEDL, ORNL, and SRL and is the basis for a continuing in-depth study. (DLC)

  14. SPATIAL ANALYSIS OF SOIL EROSION AND NON-POINT SOURCE POLLUTION BASED ON GIS IN ERLONG LAKE WATERSHED, JILIN PROVINCE

    Institute of Scientific and Technical Information of China (English)

    WANG Ning; ZHANG Hong-yan; WANG Hui-lian; ZHANG Zheng-xiang

    2004-01-01

    Data collection, factor composition, nappe analysis and integrative simulation of natural geographical factors in Erlong Lake watershed have been carried out based on GIS. The risk areas where non-point source pollution may occur were compartmentalized and assessed, and the total soil erosion and the runoffs of N and P with rainfall in this valley were worked out by experiment and GIS mapping. The study indicated that the main type of soil in dry land with variable slope east of the lake and the middle-south parts of steep slope mountainous region (erosion source pollution (NSP) of nitrogen and phosphorus loss was corresponded with the soil erosion. Spatial distribution and the reasons of the distribution difference have been presented and it was emphasized that the human activities among the influence factors was the most important. It surely offers a scientific basis to control and prevent non-point source pollution in the watershed.

  15. Internal Erosion During Soil PipeFlow: State of Science for Experimental and Numerical Analysis

    Science.gov (United States)

    Many field observations have led to speculation on the role of piping in embankment failures, landslides, and gully erosion. However, there has not been a consensus on the subsurface flow and erosion processes involved, and inconsistent use of terms have exacerbated the problem. ...

  16. Diet influenced tooth erosion prevalence in children and adolescents: Results of a meta-analysis and meta-regression

    NARCIS (Netherlands)

    Salas, M.M.; Nascimento, G.G.; Vargas-Ferreira, F.; Tarquinio, S.B.; Huysmans, M.C.D.N.J.M.; Demarco, F.F.

    2015-01-01

    OBJECTIVE: The aim of the present study was to assess the influence of diet in tooth erosion presence in children and adolescents by meta-analysis and meta-regression. DATA: Two reviewers independently performed the selection process and the quality of studies was assessed. SOURCES: Studies publishe

  17. Diet influenced tooth erosion prevalence in children and adolescents: Results of a meta-analysis and meta-regression

    NARCIS (Netherlands)

    Salas, M.M.; Nascimento, G.G.; Vargas-Ferreira, F.; Tarquinio, S.B.; Huysmans, M.C.D.N.J.M.; Demarco, F.F.

    2015-01-01

    OBJECTIVE: The aim of the present study was to assess the influence of diet in tooth erosion presence in children and adolescents by meta-analysis and meta-regression. DATA: Two reviewers independently performed the selection process and the quality of studies was assessed. SOURCES: Studies publishe

  18. Preliminary Integrated Safety Analysis Status Report

    Energy Technology Data Exchange (ETDEWEB)

    D. Gwyn

    2001-04-01

    This report provides the status of the potential Monitored Geologic Repository (MGR) Integrated Safety Analysis (EA) by identifying the initial work scope scheduled for completion during the ISA development period, the schedules associated with the tasks identified, safety analysis issues encountered, and a summary of accomplishments during the reporting period. This status covers the period from October 1, 2000 through March 30, 2001.

  19. Temporal compression of soil erosion processes. A regional analysis of USLE database; La compresion temporal de los procesos de erosion del suelo. Un analisis regional de la base de datos USLE

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Hidalgo, J. C.; Luis, M.; Lopez-Bermudez, F.

    2009-07-01

    When John Thornes and Denis Brunsden wrote in 1977 How often one hears the researcher (and no less the undergraduate) complain that after weeks of observation nothing happened only to learn that, the day after his departure, a flood caused unprecedented erosion and channel changes (Thrones and Brunsden, 1977, p. 57), they were focussing to important problems in Geomorphology: the extreme events and time compression of geomorphological processes. Time compression is a fundamental characteristic of geomorphological processes, some times produced by extreme events. Extreme events are rare events, defined by deviation from mean values. But from magnitude-frequency analysis we know that few events, not necessarily extreme, are able to produce a high amount of geomorphological work. finally time compression of geomorphological processes can be focused by the analysis of largest events defined by ranks, not magnitude. We have analysed the effects of largest events on total soil erosion by using 594 erosion plots from USLE database. Plots are located in different climate regions of USA and have different length of records. The 10 largest daily events mean contribution value is 60% of total soil erosion. There exist a relationship between such percentage and total daily erosive events recorded. The pattern seems to be independent of climate conditions. We discuss the nature of such relationship and the implications in soil erosion research. (Author) 17 refs.

  20. Association between body mass index and erosive esophagitis: A meta-analysis

    Institute of Scientific and Technical Information of China (English)

    Nan Cai; Guo-Zhong Ji; Zhi-Ning Fan; Yan-Feng Wu; Fa-Ming Zhang; Zhi-Fei Zhao; Wei Xu; Zheng Liu

    2012-01-01

    AIM:To conduct a meta-analysis to estimate the determinants of the association between erosive esophagitis (EE) and body mass index (BMI).METHODS:We identified the studies using PubMed.Studies were selected for analysis based on certain inclusion and exclusion criteria.Data were extracted from each study on the basis of predefined items.Metaanalyses were performed to verify the risk factors,such as obesity and gender.RESULTS:Twenty-one studies were included in this systematic review.These studies demonstrated an association between increasing BMI and the presence of EE [95% confidence interval (CI):1.35-1.88,overweight,odds ratio (OR) =1.60,P value homogeneity 0.003,95% CI:1.65-2.55,obese,OR =2.05,P <0.01].The heterogeneity disappeared by stratifying for gender.No publication bias was observed in this metaanalysis by the Egger method.CONCLUSION:This analysis demonstrates a positive association between BMI and the presence of EE,especially in males.The risk seems to progressively increase with increasing weight.

  1. Preliminary Study on the Use of Radionuclides 137{sup C}s and 210{sup P}b and Spectro radiometry Techniques as Tools to Determine Soil Erosion State; Estudio Preliminar sobre el Uso de los Radionucleidos 137{sup C}s y 210{sup P}b y las Tecnicas de Espectrorradiometria como Herramientas para Determinar el Estado de Erosion de Suelos

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Vegas, E.; Gasco Leonarte, C.; Schmid, T.; Suarez, J. A.; Rodriguez Rastrero, M.; Almorox Alonso, J.

    2013-07-01

    Radionuclides are largely used as tools for studying and quantifying soil erosion. The global fallout of artificial radionuclides derived from weapons testing (1945-1970) was rapidly and firmly fixed in soil surface horizons. This allowed determining soil erosion by comparing 137{sup C}s inventories at individual sampling points with a reference inventory. This procedure is complemented with the 210{sup P}buns inventory calculation as an indicator of the local average of radionuclides deposition. Spectro radiometry is implemented to associate soil reflectance measurements to physical and chemical soil properties related to soil erosion processes obtained from laboratory analyses. The methodology applies both instrumental techniques in soil samples from a semiarid agricultural area near to Camarena (Toledo). The resulting inventories obtained for 137{sup C}s and 210{sup P}bexc are similar to the Spanish reference allowing comparation. Spectro radiometry results correlate well with soil properties measured in the laboratory and can be applied to determine these properties more quickly and easily, as well as for integration with gamma spectrometry results. This is a preliminary study to identify soils affected by erosion that is presented as a Master thesis of the Official Master Degree: {sup A}gro- Environmental Technology for a Sustainable Agriculture{sup ,} of the Technical University of Madrid - School of Agricultural Engineers (UPM-ETSI). Coherent and complimentary results are obtained applying both instrumental techniques within this agricultural area.. (Author)

  2. Fort Drum Preliminary Fiscal Impact Analysis.

    Science.gov (United States)

    1986-02-01

    of inmigrants 0 Fiscal histories, projections, and impacts for counties, cities, towns, villages, school districts, and the state. The results of...distribution of the inmigrating population within the three counties. Thus, an accurate forecast of the expected distribution of the inmigrating population is a...The distribution of inmigration to the school districts was made using the analysis explained in Chapter 3. Children associated with 800 new on-post

  3. Preliminary analysis of turbochargers rotors dynamic behaviour

    Science.gov (United States)

    Monoranu, R.; Ştirbu, C.; Bujoreanu, C.

    2016-08-01

    Turbocharger rotors for the spark and compression ignition engines are resistant steels manufactured in order to support the exhaust gas temperatures exceeding 1200 K. In fact, the mechanical stress is not large as the power consumption of these systems is up to 10 kW, but the operating speeds are high, ranging between 30000 ÷ 250000 rpm. Therefore, the correct turbochargers functioning involves, even from the design stage, the accurate evaluation of the temperature effects, of the turbine torque due to the engine exhaust gases and of the vibration system behaviour caused by very high operating speeds. In addition, the turbocharger lubrication complicates the model, because the classical hydrodynamic theory cannot be applied to evaluate the floating bush bearings. The paper proposes a FEM study using CATIA environment, both as modeling medium and as tool for the numerical analysis, in order to highlight the turbocharger complex behaviour. An accurate design may prevent some major issues which can occur during its operation.

  4. MISSE 2 PEACE Polymers Experiment Atomic Oxygen Erosion Yield Error Analysis

    Science.gov (United States)

    McCarthy, Catherine E.; Banks, Bruce A.; deGroh, Kim, K.

    2010-01-01

    Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft performance and durability. To address this, 40 different polymer samples and a sample of pyrolytic graphite, collectively called the PEACE (Polymer Erosion and Contamination Experiment) Polymers, were exposed to the LEO space environment on the exterior of the International Space Station (ISS) for nearly 4 years as part of the Materials International Space Station Experiment 1 & 2 (MISSE 1 & 2). The purpose of the PEACE Polymers experiment was to obtain accurate mass loss measurements in space to combine with ground measurements in order to accurately calculate the atomic oxygen erosion yields of a wide variety of polymeric materials exposed to the LEO space environment for a long period of time. Error calculations were performed in order to determine the accuracy of the mass measurements and therefore of the erosion yield values. The standard deviation, or error, of each factor was incorporated into the fractional uncertainty of the erosion yield for each of three different situations, depending on the post-flight weighing procedure. The resulting error calculations showed the erosion yield values to be very accurate, with an average error of 3.30 percent.

  5. Numerical Analysis of Flow Erosion on Sand Discharge Pipe in Nitrogen Drilling

    Directory of Open Access Journals (Sweden)

    Hongjun Zhu

    2013-01-01

    Full Text Available In nitrogen drilling, entrained sand particles in the gas flow may cause erosive wear on metal surfaces and have a significant effect on the operational life of discharge pipelines, especially for elbows. In this paper, computational fluid dynamics (CFD simulations based code FLUENT is carried out to investigate the flow erosion on a sand discharge pipe in conjunction with an erosion model. The motion of the continuum phase is captured based on solving the three-dimensional Reynolds-averaged Navier-Stokes (RANS equations, while the kinematics and trajectory of the sand particles are evaluated by the discrete phase model (DPM. The flow field has been examined in terms of pressure, velocity, and erosion rate profiles along the flow path in the bend of the simulated discharge pipe. Effects of flow parameters such as inlet velocity, sandy volume fraction, and particle diameter and structure parameters such as pipe diameter and bend curvature are analyzed based on a series of numerical simulations. The results show that small pipe diameter or small bend curvature leads to serious erosion, while slow flow, little sandy volume fraction, and small particle diameter can weaken erosion. The results obtained from the present work provide useful guidance to practical operation and discharge pipe design.

  6. The ecological structures as components of flood and erosion vulnerability analysis in costal landscapes

    Science.gov (United States)

    Valentini, E.; Taramelli, A.; Martina, M.; Persichillo, M. G.; Casarotti, C.; Meisina, C.

    2014-12-01

    The direct and the indirect changes of natural habitats for coastal development can affect the level of exposure to erosion and flooding (inundation). Although engineered structures are still preferred for coastal safety there is an increasing number of applications of ecosystem-based solutions worldwide as the building with nature approaches and the arising natural capital evaluation. A question to which we should respond, is the possibility of using the wide range of satellite data and the already available Earth Observation based products to make a synoptic structural and environmental vulnerability assessment. By answering to this, we could also understand, if and how many markers/signals can be identified in the landscape components, to define transitions to and from nonlinear processes - to and from scale invariant spatial distributions- characterizing the evolution of the environmental patch size mosaic, the landscape. The Wadden Sea, in example, is a productive estuarine area in the south-eastern coastal zone of the North Sea. It is characterized by extensive tidal mud flats, saltmarshes and by the tidal channel network between the mainland and the chain of islands along the North Sea side. The area has a UNESCO World Heritage Status and a Natura 2000 status. Here, we identified thresholds to distinguish spatial and temporal patterns controlled by changes in environmental variables. These patterns are represented by the cover percent and by the structural level of vegetation and sediment/soil in each identified patch. The environmental variables are those able to act on the patch size distribution as the forcing factors from the sea (wind and waves fields) or from the climate and the hydrology drivers. The Bayesian approach defines the dependencies of the spatial patch size distribution from the major flooding and erosion environmental variables. When the analysis is scaled up from the ecosystem units to the landscape level thanks to the satellite

  7. Analysis of VIA and EbA in a River Bank Erosion Prone Area of Bangladesh Applying DPSIR Framework

    Directory of Open Access Journals (Sweden)

    Syed Hafizur Rahman

    2016-10-01

    Full Text Available This study aims to set up a comprehensive approach to the Vulnerability and Impact Assessment (VIA of river erosion and to suggest Ecosystem-based Adaptation (EbA practices. Based on the analysis of vulnerability using the Driver-Pressure-State-Impact-Response (DPSIR framework, this paper discusses some of the significant climatic (rainfall pattern, temperature, seasonal drift, cold wave and heat wave and non-climatic (river erosion, repetitive death of field crops and agrochemicals forces in the Kazipur Upazila (Sirajganj District—a river erosion-prone area of Bangladesh. Both primary (Key Informants Interview, Household Survey, and Focus Group Discussion and secondary (climatic, literature review data have been used in revealing the scenario of climatic stress. The analysis revealed a slightly increasing trend of mean annual temperature, and a decreasing trend of total annual rainfall from 1981 to 2015, which have been supported by people’s perception. This study found that river erosion, the increase of temperature and the late arrival of monsoon rain, excessive monsoon rainfall, high use of agrochemicals, and flow alterations are major drivers in the riverine ecosystem. These drivers are creating pressures on agricultural land, soil fertility, water availability and livelihood patterns of affected communities. Hence, floating bed cultivation, integrated pest management, use of cover crops, reforestation, the introduction of an agro-weather forecasting system, and a new variety of flood tolerant species have been suggested as potential EbA to cope with river bank erosion and to increase the capacity of the affected ecosystem.

  8. Coupled CFD-Thermal Analysis of Erosion Patterns Resulting from Nozzle Wedgeouts on the SRTMV-N2

    Science.gov (United States)

    Ables, Catherine; Davis, Philip

    2014-01-01

    The objective of this analysis was to study the effects of the erosion patterns from the introduction of nozzle flaws machined into the nozzle of the SRTMV-N2 (Solid Rocket Test Motor V Nozzle 2). The SRTMV-N2 motor was a single segment static subscale solid rocket motor used to further develop the RSRMV (Redesigned Solid Rocket Motor V Segment). Two flaws or "wedgeouts" were placed in the nozzle inlet parallel to the ply angles of that section to study erosion effects. One wedgeout was placed in the nose cap region and the other placed in the inlet ring on the opposite side of the bondline, separated 180 degrees circumferentially. A coupled CFD (Computational Fluid Analysis)-thermal iterative analytical approach was utilized at the wedgeouts to analyze the erosion profile during the burn time. The iterative CFD thermal approach was applied at five second intervals throughout the motor burn. The coupled fluid thermal boundary conditions were derived from a steady state CFD solution at the beginning of the interval. The derived heat fluxes were then applied along the surface and a transient thermal solution was developed to characterize the material response over the specified interval. Eroded profiles of each of the nozzle's wedgeouts and the original contour were created at each of the specified intervals. The final iteration of the erosion profile showed that both wedgeouts were "washedout," indicating that the erosion profile of the wedgeout had rejoined the original eroded contour, leaving no trace of the wedgeouts post fire. This analytical assessment agreed with post-fire observations made of the SRTMV-N2 wedgeouts, which noted a smooth eroded contour.

  9. Preliminary Analysis of Helicopter Options to Support Tunisian Counterterrorism Operations

    Science.gov (United States)

    2016-04-27

    results of the current analysis and in Mouton et al., 2015, is the relative cost -effectiveness between the CH-47D and the Mi-17v5. In the previous...helicopters from Sikorsky to fulfill a number of roles in counterterrorism operations. Rising costs and delays in delivery raised the question of...whether other cost -effective options exist to meet Tunisia’s helicopter requirement. Approach Our team conducted a preliminary assessment of

  10. Efficacy of Topical Tacrolimus for Erosive Oral Lichen Planus:A Meta-analysis

    Institute of Scientific and Technical Information of China (English)

    Chun-lan Guo; Ji-zhi Zhao; Jie Zhang; Hai-tao Dong

    2015-01-01

    Objective To assess the efficacy and safety of topical tacrolimus for erosive oral lichen planus (EOLP). Methods Literatures published up to December 2013 were searched from PubMed, Embase, CENTRAL, Chinese BioMedical Literature Database (CBM), and System for Information on Grey Literature in Europe (SIGLE). All randomized controlled trials (RCTs) of topical tacrolimus for EOLP which compared with other interventions or a placebo were considered in this Meta-analysis. Two researchers collected data independently. The assessment of methodological quality was based on Cochrane Handbook and the materials were analyzed with the software Revman 5.2.5. The primary outcome measures were the symptoms (e.g. pain, discomfort) complained by patients. The secondary outcome measures included the improvement rate of clinical signs assessed by the investigators and the incidence of adverse effects (e.g. clinical candidiasis). Results A total of 9 RCTs involving 476 patients were finally included. The pooled odds ratio (OR) of clinical improvement for topical tacrolimusvs. topical corticosteroids was 1.19 [95% confidence interval (CI): 0.64-2.22,I2: 44%]. Regarding to 0.1% tacrolimus and 0.03% tacrolimus, the pooledOR were 1.87 (95 %CI: 0.60-5.82) and 1.47 (95 %CI: 0.14-16.04) respectively in subgroup analysis. No serious adverse events were reported in topical tacrolimus group. Conclusions There was no evidence to support that topical tacrolimus for EOLP was more effective and safer than topical corticosteroids in this Meta-analysis. Clinical assessment criteria should be established and accepted by clinicians and researchers before further RCTs are undertaken.

  11. Comparing the erosive effect of Iranian soft drinks with standard samples; A Calcium ion analysis

    Directory of Open Access Journals (Sweden)

    Fallahinejad Ghajari M.

    2007-05-01

    Full Text Available Background and Aim: Extensive and continuous consumption of acidic drinks is the main cause of enamel erosion in human teeth. The purpose of this study was to compare the erosive potential of two Iranian drinks with those of two imported ones. Materials and Methods: Two Iranian drinks (Cola Zamzam and Orange Zamzam and two imported ones (Pepsi and Miranda were studied in this experimental invitro study. 120 intact premolar teeth, extracted for orthodontic reasons were divided into 3 equal groups (A, B and C. Each group was exposed to one of the drinks for exposure times of: A: 15 minutes, B: 45 minutes and C: 12 hours. Each group was divided into 4 subgroups (each containing 10 teeth, which were exposed to 20 ml of one of the 4 drinks. The exposed surface was the same in all samples (a 5 mm in diameter semi circular window. The amount of Ca++ ion (mg/ml added to each drink at the end of exposure time was estimated by atomic absorption spectrophotometer. Results: 2 way ANOVA showed that the drinks were significantly different with regard to released Calcium ion. Time had significant effect on erosive potential. The two mentioned factors had significant interaction (P<0.001. The most erosive effect was seen in 12 hours in all of the drinks. The erosive effect of Orange Zamzam in 15 minutes and Pepsi in 45 minutes and 12 hours was significantly more than other groups (P<0.001. Conclusions: Pepsi had the most long term erosive effect among the four drinks, and Cola Zamzam had the least erosive potential.

  12. Development of a virtual tool for the quantification and the analysis of soil erosion in olive orchards based on RUSLE

    Science.gov (United States)

    Marín, Víctor; Taguas, Encarnación V.; Redel, María Dolores; Gómez, Jose A.

    2013-04-01

    Erosion rates above 30 t ha-1 yr-1 have been measured in hilly agricultural regions such as Andalusia in Southern Spain, associated to orchard crops (Gómez et al., 2008). In this region, there are 1.48 Mha of olive groves (CAP, 2007), which are essential in terms of income, employment and landscape. The acquisition of training and experience in modelling soil erosion is difficult by the conventional system teaching for students as well as specific technicians. This paper presents a telematic training/analysis tool, CREO (Calculator of Rates of Erosion in Olive crops/ Calculadora RUSLE para Erosión en Olivar), to quantify erosion rates in olive grove areas based on the Revised Universal Soil Loss Equation (RUSLE; Renard et al., 1997) and on specific information published on soil losses and soil characteristics in olive orchards in Southern Spain. The tool has been programmed with Matlab R2008a from MathWorks Inc. (USA), although it could be used as an executable program in Spanish and English language by interested users. It consists of seven menus with visual material where different sources, databases and methodologies are presented to quantify soil rates (A = R.K.LS.C.P) by the calculation of six factors.A is computed in t ha-1 yr-1; R is the rainfall erosivity factor (MJ mm ha-1.h-1 yr-1); K represents the soil erodibility (t ha h ha-1 MJ-1 mm-1); L is the slope length factor and S is the slope gradient factor (dimensionless); C is a cover management factor (dimensionless) and P is a support practice factor (dimensionless). Different equations and methodologies can be selected by the user for the calculation of each factor while recommendations and advice can be showed for the suitable use of the tool. It is expected that CREO was a valuable helpful tool in environmental studies associated to olive orchard land use and its further use allows a better understanding of the interaction among the different factors involved, and better access to available

  13. The spatiotemporal patterns of rainfall erosivity in Yunnan Province, southwest China: An analysis of empirical orthogonal functions

    Science.gov (United States)

    Duan, Xingwu; Gu, Zhijia; Li, Yungang; Xu, Huijuan

    2016-09-01

    Rainfall erosivity (R) influences the formation mechanisms and succession processes of soil erosion. Knowing of the R factor facilitates the prediction of soil erosion and of the impact of climate change on erosion. However, defining of the R factor is challenging because its spatiotemporal variation can be complex. We combined the Empirical Orthogonal Function (EOF), North criteria, and Mann-Kendall test (M-K) to investigate the spatiotemporal patterns of the R factor for a study area in a typical mountain plateau region of Yunnan Province (YP), China. Daily rainfall records from 1960 to 2012 were collected from 115 national meteorological observation stations in YP. Based on the daily rainfall erosivity estimating model, we determined that the average annual R factor was 4383.85 MJ·mm·ha- 1·h- 1, the seasonal R factor exhibited an order of summer > autumn > spring > winter, and the summer R was significantly higher than winter R. The spatiotemporal variation of the R factor was complex and did not reveal a uniform pattern. The spatial distribution revealed that the annual and seasonal R factors in the west were higher than those in the east, and R in the south were higher than those in the north. The temporal trends of annual, summer, and autumn R factors had decreasing trends from 1960 to 2012. On the contrary, the spring and winter R factors showed an increasing trend. The EOF analysis identified two typical spatiotemporal patterns of the annual R factor in YP, and three for spring, summer, autumn, and winter R factors. These patterns represented the influence of the monsoon, circulation systems, and complex terrain conditions on the rainfall in the YP.

  14. Measuring medium-term sheet erosion in gullies from trees: A case study using dendrogeomorphological analysis of exposed pine roots in central Iberia

    Science.gov (United States)

    Bodoque, J. M.; Lucía, A.; Ballesteros, J. A.; Martín-Duque, J. F.; Rubiales, Juan M.; Genova, M.

    2011-11-01

    The assessment of gully erosion poses a great challenge because of the complexity and connectivity of the geomorphic processes involved. This study focuses on the quantification of sheet erosion rates in a set of slope gullies located on the northern piedmont of the Guadarrama Mountains (Spanish Central System). In order to delineate accurately the gully areas in which sheet erosion was predominant, the Hydrologic/Erosion Response Unit (HRU/ERU) approach was used and a dendrogeomorphological analysis of exposed tree roots was carried out to quantify sheet erosion rates in one selected HRU/ERU. Identification of the first year of exposure by erosion from anatomical criteria was therefore critical. The 29 samples taken were prepared for anatomical analysis and cross-dated. Anatomical analysis of the samples showed a reduction in the lumen area of earlywood tracheids following root exposure and also, in most cases, a slight increase in growth rings. Moreover, at the end of the ring, latewood tissue and visible annual borders were very clearly defined by several rows of thick-walled tracheids. A non-parametric test was used on the findings derived from this qualitative analysis to objectify determination of the first year of exposure. Estimates of sheet erosion were obtained by dividing the height of eroded soil by the number of years that each root was exposed. The mean value of soil erosion for the entire study site was then determined from statistical inference. Using this procedure, a range of sheet erosion rates between 6.2 and 8.8 mm y -1 (125.2 and 177.8 t ha -1 year -1) was obtained for the dominant HRU/ERU of these gullies in central Iberia. These estimates of eroded soil thickness were adjusted based on the recent finding that root anatomical changes occur prior to their exposure by erosion.

  15. Spatio-temporal analysis of soil erosion risk and runoff using AnnAGNPS

    Science.gov (United States)

    Yeshaneh, Eleni; Wagner, Wolfgang; Blöschl, Günter

    2014-05-01

    Soil erosion is one form of land degradation in Ethiopia deteriorating the fertility and productivity of the land. This fact indicates the need to delineate high erosion risk areas for appropriate soil and conservation measures. Land use/cover change is one of the important factors in soil erosion. This study attempts test and implement AnnAGNPS model to estimate the spatio-temporal patterns of soil erosion and runoff associated with land use changes in the past 50 years in the 9900 ha upstream part of the Koga catchment. High erosion risk areas will then be delineated for simulation of the appropriate soil and water conservation measures that would reduce the soil loss. The study is based on two years high temporal resolution data on discharge, sediment, and rain fall accompanied by historical land use/cover data generated from satellite imagery. In addition, it uses several documented physical parameters of the study area. The Koga catchment is one of the agriculture dominated typical catchments in the North Western Ethiopian highlands with high population density that lead to increased pressure on natural resources.

  16. Micro-mechanical analysis on the onset of erosion in granular materials

    Science.gov (United States)

    Harshani, H. M. D.; Galindo-Torres, S. A.; Scheuermann, A.; Muhlhaus, H. B.

    2015-10-01

    The onset of internal erosion is a particle level phenomenon, and therefore, a numerical model capable of tracking the behaviour of particles at micro-scale is needed to exemplify most of the critical variables involved in the process. In this paper, a three-dimensional fully coupled fluid-solid model was utilized to explore the initiation of erosion. Particles were modelled on a micro-scale using the discrete element method (DEM), while the fluid was modelled at a meso-scale using the lattice Boltzmann method (LBM). Fluid was passed through a solid matrix in an opposing direction to gravity with the pore water pressure controlled in stepwise stages until internal erosion or bulk movement of the particles developed and progressed. The model was validated through experimental results found in the literature. Once validated, particle fluid properties were analyzed for the onset of erosion. Determination of a critical hydraulic gradient was obtained from the modelled scenario, which gave clear evidence that the coupled DEM-LBM scheme is a very effective tool for studying internal erosion phenomena in water retaining structures.

  17. Estimation of vegetation parameter for modeling soil erosion using linear Spectral Mixture Analysis of Landsat ETM data

    Science.gov (United States)

    de Asis, Alejandro M.; Omasa, Kenji

    Soil conservation planning often requires estimates of soil erosion at a catchment or regional scale. Predictive models such as Universal Soil Loss Equation (USLE) and its subsequent Revised Universal Soil Loss Equation (RUSLE) are useful tools to generate the quantitative estimates necessary for designing sound conservation measures. However, large-scale soil erosion model-factor parameterization and quantification is difficult due to the costs, labor and time involved. Among the soil erosion parameters, the vegetative cover or C factor has been one of the most difficult to estimate over broad geographic areas. The C factor represents the effects of vegetation canopy and ground covers in reducing soil loss. Traditional methods for the extraction of vegetation information from remote sensing data such as classification techniques and vegetation indices were found to be inaccurate. Thus, this study presents a new approach based on Spectral Mixture Analysis (SMA) of Landsat ETM data to map the C factor for use in the modeling of soil erosion. A desirable feature of SMA is that it estimates the fractional abundance of ground cover and bare soils simultaneously, which is appropriate for soil erosion analysis. Hence, we estimated the C factor by utilizing the results of SMA on a pixel-by-pixel basis. We specifically used a linear SMA (LSMA) model and performed a minimum noise fraction (MNF) transformation and pixel purity index (PPI) on Landsat ETM image to derive the proportion of ground cover (vegetation and non-photosynthetic materials) and bare soil within a pixel. The end-members were selected based on the purest pixels found using PPI with reference to very high-resolution QuickBird image and actual field data. Results showed that the C factor value estimated using LSMA correlated strongly with the values measured in the field. The correlation coefficient ( r) obtained was 0.94. A comparative analysis between NDVI- and LSMA-derived C factors also proved that the

  18. Comparative analysis of cell proliferation ratio in plaque and erosive oral lichen planus: An immunohistochemical study

    Directory of Open Access Journals (Sweden)

    C Pramod Redder

    2014-01-01

    Full Text Available Background: Proliferating cell nuclear antigen (PCNA is a nuclear protein synthesized in the late G1 and S-phase of the cell cycle. Detection of this protein represents a useful marker of the proliferation status of lesions. This study has been carried out to evaluate the cell proliferation rate in oral lichen planus (OLP and comparison between plaque and erosive lichen planus, which indicates the potential for malignant transformation. Materials and Methods: This study was comprised of 64 cases of histologically proven lichen planus, out of which 32 cases of plaque and erosive each was taken. Two sections were taken from each, one for H and E staining to verify histological diagnosis according to Eisenberg criteria, other sections were stained according to super sensitive polymer horse radish peroxidise method for identifying immunohistochemical expression of PCNA. Data were statistically analyzed by Tukey high-range statistical domain test. Statistically significant P value was considered <0.05. Results: In two types of lichen planus, erosive type (66.86% showed higher expression of PCNA followed by plaque (17.07%. Overall, P value was <0.001, which was statistically significant. It indicates that proliferation activity is more in erosive lichen planus followed by plaque type, which ultimately results in increased rate of malignant transformation. Conclusion: PCNA is a good nuclear protein marker to evaluate the proliferation status of OLP. Out of the two types of lichen planus, erosive type possesses more proliferative ratio and chances of malignant change is more in this type. It emphasizes the importance of long-term follow-up with erosive type when compared with plaque type.

  19. CFD simulation and experimental analysis of erosion in a slurry tank test rig

    Directory of Open Access Journals (Sweden)

    Bart Hans-Jörg

    2013-04-01

    Full Text Available Erosion occurring in equipment dealing with liquid-solid mixtures such as pipeline parts, slurry pumps, liquid-solid stirred reactors and slurry mixers in various industrial applications results in operational failure and economic costs. A slurry erosion tank test rig is designed and was built to investigate the erosion rates of materials and the influencing parameters such as flow velocity and turbulence, flow angle, solid particle concentration, particles size distribution, hardness and target material properties on the material loss and erosion profiles. In the present study, a computational fluid dynamics (CFD tool is used to simulate the erosion rate of sample plates in the liquid-solid slurry mixture in a cylindrical tank. The predictions were made in a steady state and also transient manner, applying the flow at the room temperature and using water and sand as liquid and solid phases, respectively. The multiple reference frame method (MRF is applied to simulate the flow behavior and liquid-solid interactions in the slurry tank test rig. The MRF method is used since it is less demanding than sliding mesh method (SM and gives satisfactory results. The computational domain is divided into three regions: a rotational or MRF zone containing the mixer, a rotational zone (MRF containing the erosion plates and a static zone (outer liquid zone. It is observed that changing the MRF zone diameter and height causes a very low impact on the results. The simulated results were obtained for two kinds of hard metals namely stainless steel and ST-50 under some various operating conditions and are found in good agreement with the experimental results.

  20. Measurement and data analysis methods for field-scale wind erosion studies and model validation

    NARCIS (Netherlands)

    Zobeck, T.M.; Sterk, G.; Funk, R.F.; Rajot, J.L.; Stout, J.E.; Scott Van Pelt, R.

    2003-01-01

    Accurate and reliable methods of measuring windblown sediment are needed to confirm, validate, and improve erosion models, assess the intensity of aeolian processes and related damage, determine the source of pollutants, and for other applications. This paper outlines important principles to conside

  1. AUTOMATED GIS WATERSHED ANALYSIS TOOLS FOR RUSLE/SEDMOD SOIL EROSION AND SEDIMENTATION MODELING

    Science.gov (United States)

    A comprehensive procedure for computing soil erosion and sediment delivery metrics has been developed using a suite of automated Arc Macro Language (AML ) scripts and a pair of processing- intensive ANSI C++ executable programs operating on an ESRI ArcGIS 8.x Workstation platform...

  2. A wavelet analysis of the relationship between Loess Plateau erosion and sunspots

    NARCIS (Netherlands)

    Gao, P.; Geissen, V.; Temme, A.J.A.M.; Ritsema, C.J.; Mu, X.; Wang, F.

    2014-01-01

    The Chinese Loess Plateau is one of the most rapidly eroding regions in the world. The purpose of this study is to find out to which extent soil erosion on the Loess Plateau is driven by sunspot activity. We analyzed the relation between annual sediment discharge (from 1919 to 2010) from the Loess P

  3. Statistical analysis of particulate concentration from electrode erosion of gas discharge

    Science.gov (United States)

    Zhong, Wei; Liu, Yunlong; Wang, Lei; Jin, Dazhi; Tan, Xiaohua

    2017-01-01

    In discharge processes, electrode erosion is inevitable and may be a primary cause of gap failure. Features generated from electrode erosion, such as particulates and pits, would lead to field distortion and self-breakdown failure, in essence. To quantitatively clarify how these features of erosion are generated as the discharge shot accumulates, this paper introduces a statistical method to analyze particulate concentration in the eroded surface. Based on experimental data from laser confocal microscopy, this method could extract and process the profile of the electrode surface after different discharge shots. Statistical results indicate that conditioning effects have been found in the first 100 shots, where the discharge arc plays a role to polish more prominently, rather than ablate, the electrode surface. After this period, electrode erosion could be found to be increasingly heavier and the number of particulates and pits increases rapidly. The proportion function of the particulates height or pits depth can be fitted by power distribution and the correlations between the two function coefficients a, b and discharge shots number n are roughly linear, positive and negative, respectively.

  4. Numerical analysis of erosion of the rotor labyrinth seal in a geothermal turbine

    Energy Technology Data Exchange (ETDEWEB)

    Mazur, Z.; Urquiza, G.; Campos, R. [Instituto de Investigaciones Electricas, Morelos (Mexico); Sierra, F. [Centro de Investigacion en Energia-UNAM, Morelos (Mexico)

    2002-10-01

    Excessive erosion of the labyrinth seal of a 100 MW geothermal turbine has been investigated. This study used computational fluid dynamics (CFD) and aims to identify one cause of erosion and a possible solution for substantially reducing it. The predictions were based upon a numerical calculation using a CFD model of the labyrinth seal with a water/steam flow containing hard solid particles and solved with a commercial CFD code: Fluent V5.0. The results confirmed the existence of flow conditions that play a major role in the rotor labyrinth seal erosion. Afterwards, the flow path was simulated with changes of rotor labyrinth seal geometry, which are indeed feasible of being implemented. The results confirmed that it is possible to reduce the erosion process by approximately 80% by incorporating a steam flow deflector in the fourth stage diaphragm, which changes the steam flow direction in the inlet zone to the rotor labyrinth seal channel, resulting in a reduction in steam volumetric mass flow and hard particle velocity by about 44%. (author)

  5. Controlling Gully Erosion: An Analysis of Land Reclamation Processes and Challenges in Chambal Badlands, India

    Science.gov (United States)

    Pani, Padmini

    2016-04-01

    Gully erosion is among the significant environmental problems in the Central Indian states. The Chambal badlands, spread over an area of around 4000 sq. kms is among the worst affected regions in terms of land degradation. The enormity of the Chambal ravines, which achieve depths of more than 60 metres, points to the significance of the geological explanation, suggesting that neotectonics may have paved the way for ravine erosion, but it is most definitely exacerbated by anthropogenic activities. Although, there is field evidence that ephemeral gully erosion is responsible for significant soil losses, little is known about the contributing factors. The region also faces significant developmental challenges and the inaccessibility and low productivity of the area contributes to its continued underdevelopment. This study uses a combination of geo-spatial techniques and physical and socio-economic field survey to evaluate the responses to gully erosion and its implications. This paper attempts to study (a) extent and severity of gully erosion process in the Chambal badlands; (b) an evaluation of reclamation measures undertaken by various agencies, including the affected people; (c) to examine the sustainability implications of land reclamation measures. The extent, pattern and inter-temporal changes of gully erosion have been examined through various mapping techniques and field survey. The land reclamation have been mapped using satellite images and ground truth verification. The various kinds of land reclamation measures that have been undertaken on the ground and their sustainability implications have been investigated through survey of affected households in selected villages. The results show that in response to the severe loss of agricultural land because of gully head encroachment in the agricultural field and decline in land productivity, farmers have undertaken various land reclamation measures, including mechanised land levelling. The land levelling

  6. Risk factors for mesh erosion after female pelvic floor reconstructive surgery: a systematic review and meta-analysis.

    Science.gov (United States)

    Deng, Tuo; Liao, Banghua; Luo, Deyi; Shen, Hong; Wang, Kunjie

    2016-02-01

    To explore the risk factors for mesh erosion after female pelvic floor reconstructive surgery based on published literature. A systematic literature search of the PubMed, Embase, Cochrane Library, Chinese Biomedical Literature (CBM), China National Knowledge Infrastructure (CNKI) and Chinese Science and Technology Periodical (VIP) databases was performed to identify studies related to the risk factors for mesh erosion after female pelvic floor reconstruction published before December 2014. Summary unadjusted odds ratios (ORs) with 95% confidence intervals (CIs) were calculated to assess the strength of associations between the factors and mesh erosion. In all, 25 studies containing 7,084 patients were included in our systematic review and meta-analysis. Statistically significant differences in mesh erosion after female pelvic floor reconstruction were found in older vs younger patients (OR 0.96, 95% CI 0.94-0.98), more parities vs less parities (OR 1.27, 95% CI 1.07-1.51), the presence of premenopausal/oestrogen replacement therapy (ERT) (OR 1.36, 95% CI 1.03-1.79), diabetes mellitus (OR 1.87, 95% CI 1.35-2.57), smoking (OR 2.35, 95% CI 1.80-3.08), concomitant pelvic organ prolapse (POP) surgery (OR 0.37, 95% CI 0.16-0.84), concomitant hysterectomy (OR 1.46, 95% CI 1.03-2.07), preservation of the uterus at surgery (OR 0.22, 95% CI 0.08-0.63), and surgery performed by senior vs junior surgeons (OR 0.42, 95% CI 0.30-0.58). Our study indicates that younger age, more parities, premenopausal/ERT, diabetes mellitus, smoking, concomitant hysterectomy, and surgery performed by a junior surgeon were significant risk factors for mesh erosion after female pelvic floor reconstructive surgery. Moreover, concomitant POP surgery and preservation of the uterus may be the potential protective factors for mesh erosion. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

  7. Reduction Effect Analysis of Erosion Control Facilities Using Debris Flow Numerical Model

    Science.gov (United States)

    Jun, Kyewon; Kim, Younghwan; Oh, Chaeyeon; Lee, Hojin; Kim, SoungDoug

    2017-04-01

    With the increase in frequency of typhoons and heavy rains following the climate change, the scale of damage from the calamities in the mountainous areas has been growing larger and larger, which is different from the past. For the case of Korea where 64% of land is consisted of the mountainous areas, establishment of the check dams has been drastically increased after 2000 in order to reduce the damages from the debris flow. However, due to the lack of data on scale, location and kind of check dams established for reducing the damages in debris flow, the measures to prevent damages based on experience and subjective basis have to be relied on. This study, the high-precision DEM data was structured by using the terrestrial LiDAR in the Jecheon area where the debris flow damage occurred in July 2009. And, from the numerical models of the debris flow, Kanako-2D that is available to reflect the erosion and deposition action was applied to install the erosion control facilities (water channel, check dam) and analyzed the effect of reducing the debris flow shown in the downstream. After installing the erosion control facilities, most of debris flow moves along the water channel to reduce the area to expand the debris flow, and after installing the check dam, the flow depth and flux of the debris flow were reduced along with the erosion. However, even after constructing the erosion control facilities, damages were still inflicted on private residences or agricultural sites located on the upper regions where the deposition was made. Acknowledgments This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education(NRF-2016R1D1A3B03933362)

  8. NRT Rotor Structural / Aeroelastic Analysis for the Preliminary Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Ennis, Brandon Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Paquette, Joshua A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    This document describes the initial structural design for the National Rotor Testbed blade as presented during the preliminary design review at Sandia National Laboratories on October 28- 29, 2015. The document summarizes the structural and aeroelastic requirements placed on the NRT rotor for satisfactory deployment at the DOE/SNL SWiFT experimental facility to produce high-quality datasets for wind turbine model validation. The method and result of the NRT blade structural optimization is also presented within this report, along with analysis of its satisfaction of the design requirements.

  9. Preliminary Analysis of ULPC Light Curves Using Fourier Decomposition Technique

    CERN Document Server

    Ngeow, Chow-Choong; Kanbur, Shashi; Barrett, Brittany; Lin, Bin

    2013-01-01

    Recent work on Ultra Long Period Cepheids (ULPCs) has suggested their usefulness as a distance indicator, but has not commented on their relationship as compared with other types of variable stars. In this work, we use Fourier analysis to quantify the structure of ULPC light curves and compare them to Classical Cepheids and Mira variables. Our preliminary results suggest that the low order Fourier parameters of ULPCs show a continuous trend defined by Classical Cepheids after the resonance around 10 days. However their Fourier parameters also overlapped with those from Miras, which make the classification of long period variable stars difficult based on the light curves information alone.

  10. Determinants of Trade Credit: A Preliminary Analysis on Construction Sector

    Directory of Open Access Journals (Sweden)

    Nicoleta Barbuta-Misu

    2016-07-01

    Full Text Available This paper introduces a preliminary analysis of the correlations between trade credit and some selected measures of financial performance for a sample of 958 firms acting in the construction sector. The examined period covers 2004-2013. The sample derived from Amadeus database contains firms that have sold and bought on credit. Results showed that larger firms offered and used more credit than counterparties. Firms offered and used in same time credit, but not in same level. Firms with higher return on assets and profit margin used and offered less credit from suppliers, respectively to clients. Moreover, more liquid firms used less trade payables.

  11. Quantitative and Qualitative Assessment of Soil Erosion Risk in Małopolska (Poland), Supported by an Object-Based Analysis of High-Resolution Satellite Images

    Science.gov (United States)

    Drzewiecki, Wojciech; Wężyk, Piotr; Pierzchalski, Marcin; Szafrańska, Beata

    2014-06-01

    In 2011 the Marshal Office of Małopolska Voivodeship decided to evaluate the vulnerability of soils to water erosion for the entire region. The quantitative and qualitative assessment of the erosion risk for the soils of the Małopolska region was done based on the USLE approach. The special work-flow of geoinformation technologies was used to fulfil this goal. A high-resolution soil map, together with rainfall data, a detailed digital elevation model and statistical information about areas sown with particular crops created the input information for erosion modelling in GIS environment. The satellite remote sensing technology and the object-based image analysis (OBIA) approach gave valuable support to this study. RapidEye satellite images were used to obtain the essential up-to-date data about land use and vegetation cover for the entire region (15,000 km2). The application of OBIA also led to defining the direction of field cultivation and the mapping of contour tillage areas. As a result, the spatially differentiated values of erosion control practice factor were used. Both, the potential and the actual soil erosion risk were assessed quantificatively and qualitatively. The results of the erosion assessment in the Małopolska Voivodeship reveal the fact that a majority of its agricultural lands is characterized by moderate or low erosion risk levels. However, high-resolution erosion risk maps show its substantial spatial diversity. According to our study, average or higher actual erosion intensity levels occur for 10.6 % of agricultural land, i.e. 3.6 % of the entire voivodeship area. In 20 % of the municipalities there is a very urgent demand for erosion control. In the next 23 % an urgent erosion control is needed. Our study showed that even a slight improvement of P-factor estimation may have an influence on modeling results. In our case, despite a marginal change of erosion assessment figures on a regional scale, the influence on the final prioritization of

  12. CONTENT ANALYSIS, DISCOURSE ANALYSIS, AND CONVERSATION ANALYSIS: PRELIMINARY STUDY ON CONCEPTUAL AND THEORETICAL METHODOLOGICAL DIFFERENCES

    Directory of Open Access Journals (Sweden)

    Anderson Tiago Peixoto Gonçalves

    2016-08-01

    Full Text Available This theoretical essay aims to reflect on three models of text interpretation used in qualitative research, which is often confused in its concepts and methodologies (Content Analysis, Discourse Analysis, and Conversation Analysis. After the presentation of the concepts, the essay proposes a preliminary discussion on conceptual and theoretical methodological differences perceived between them. A review of the literature was performed to support the conceptual and theoretical methodological discussion. It could be verified that the models have differences related to the type of strategy used in the treatment of texts, the type of approach, and the appropriate theoretical position.

  13. PREDICTING THE DEPTH OF EROSION IN RESERVOIRS FOLLOWING DAM REMOVAL USING BANK STABILITY ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    Martin W. DOYLE; Emily H. STANLEY; Andy R. SELLE; John M. STOFLETH; Jon M. HARBOR

    2003-01-01

    Dam removal has emerged in the U.S. as a critical concern for river management. Of particular interest is predicting the quantity of sediment that will be eroded from a reservoir following dam removal, which necessitates predicting the geometry a channel will approach as it forms in the reservoir. The geometry and sediment characteristics of the Koshkonong River were measured as it adjusted to the removal of the Rockdale Dam. Bank stability modeling was used as a tool for predicting the maximum depth of the evolving channel and general agreement was found between depths predicted with the model and those observed up to one year following dam removal. Model sensitivity analysis showed strong control of bank heights by groundwater levels in the reservoir sediment, as well as some control by vegetation established on the sediment surface. Long-term monitoring is needed to assess the accuracy of the model, but preliminary agreement is encouraging for applying this model and similar models to future dam removals.

  14. Analysis and control of erosion by solid particles in the elements of the flow system of steam turbines; Analisis y control de erosion por particulas solidas en los elementos del sistema de flujo de turbinas de vapor

    Energy Technology Data Exchange (ETDEWEB)

    Mazur Czerwiec, Zdzislaw; Campos Amezcua, Alfonso; Campos Amezcua, Rafael [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2010-07-01

    The analysis of erosion by solid particles is presented of different elements of the flow channel of the steam turbines that operate in Mexico: nozzles, stop valves, blade bosses, labyrinth seals and rotor disc; using tools of of Computational Fluid Dynamics (CFD). In these main elements of turbines a strong problem of erosion was registered that threatens the reliable operation of the turbines, its availability and its optimal yield. With base on the results of the numerical analyses, the design modifications of the different elements were developed from the flow channel of the steam turbines, in order to reduce the erosion and thus diminishing the energy losses and increasing the steam turbine efficiency. This work presents the main benefits that the Thermoelectric Power Plants obtain with the reduction of the erosion by solid particles that affect the critical components of steam turbines: extension of the period between maintenance, replacement of components, reduction of operation and maintenance costs of the turbines, and extension of the useful life of the main components. [Spanish] Se presenta el analisis de erosion por particulas solidas de diferentes elementos del canal de flujo de las turbinas de vapor que operan en Mexico: toberas, valvula de paro, tetones de los alabes, sellos de laberinto y disco del rotor; utilizando herramientas de Dinamica de Fluidos Computacional (DFC). En estos elementos principales de turbinas se registro un fuerte problema de erosion que amenaza la operacion confiable de las turbinas, su disponibilidad y su rendimiento optimo. Con base en los resultados de los analisis numericos, se desarrollaron las modificaciones de diseno de los diferentes elementos del canal de flujo de las turbinas de vapor, con el proposito de reducir la erosion y asi, disminuir las perdidas de energia e incrementar el rendimiento de las turbinas de vapor. Este trabajo presenta los principales beneficios que obtienen las Centrales Termoelectricas con la

  15. Enhanced Accident Tolerant Fuels for LWRS - A Preliminary Systems Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gilles Youinou; R. Sonat Sen

    2013-09-01

    The severe accident at Fukushima Daiichi nuclear plants illustrates the need for continuous improvements through developing and implementing technologies that contribute to safe, reliable and cost-effective operation of the nuclear fleet. Development of enhanced accident tolerant fuel contributes to this effort. These fuels, in comparison with the standard zircaloy – UO2 system currently used by the LWR industry, should be designed such that they tolerate loss of active cooling in the core for a longer time period (depending on the LWR system and accident scenario) while maintaining or improving the fuel performance during normal operations, operational transients, and design-basis events. This report presents a preliminary systems analysis related to most of these concepts. The potential impacts of these innovative LWR fuels on the front-end of the fuel cycle, on the reactor operation and on the back-end of the fuel cycle are succinctly described without having the pretension of being exhaustive. Since the design of these various concepts is still a work in progress, this analysis can only be preliminary and could be updated as the designs converge on their respective final version.

  16. LiDAR derived high resolution topography: the next challenge for the analysis of terraces stability and vineyard soil erosion

    Directory of Open Access Journals (Sweden)

    Federico Preti

    2013-09-01

    Full Text Available The soil erosion in the vineyards is a critical issue that could affect their productivity, but also, when the cultivation is organized in terraces, increase the risk due to derived slope failure processes. If terraces are not correctly designed or maintained, a progressively increasing of gully erosion affects the structure of the walls. The results of this process is the increasing of connectivity and runoff. In order to overcome such issues it is really important to recognize in detail all the surface drainage paths, thus providing a basis upon which develop a suitable drainage system or provide structural measures for the soil erosion risk mitigation. In the last few years, the airborne LiDAR technology led to a dramatic increase in terrain information. Airborne LiDAR and Terrestrial Laser Scanner derived high-resolution Digital Terrain Models (DTMs have opened avenues for hydrologic and geomorphologic studies (Tarolli et al., 2009. In general, all the main surface process signatures are correctly recognized using a DTM with cell sizes of 1 m. However sub-meter grid sizes may be more suitable in those situations where the analysis of micro topography related to micro changes is critical for slope failures risk assessment or for the design of detailed drainage flow paths. The Terrestrial Laser Scanner (TLS has been proven to be an useful tool for such detailed field survey. In this work, we test the effectiveness of high resolution topography derived by airborne LiDAR and TLS for the recognition of areas subject to soil erosion risk in a typical terraced vineyard landscape of “Chianti Classico” (Tuscany, Italy. The algorithm proposed by Tarolli et al. (2013, for the automatic recognition of anthropic feature induced flow direction changes, has been tested. The results underline the effectiveness of LiDAR and TLS data in the analysis of soil erosion signatures in vineyards, and indicate the high resolution topography as a useful tool to

  17. Electronic Warfare M-on-N Digital Simulation Logging Requirements and HDF5: A Preliminary Analysis

    Science.gov (United States)

    2017-04-12

    E. Jarvis Electronic Warfare M-on- N Digital Simulation Logging Requirements and HDF5: A Preliminary Analysis Advanced Techniques Branch Tactical...12-04-2017 NRL Memorandum Report Electronic Warfare M-on- N Digital Simulation Logging Requirements and HDF5: A Preliminary Analysis Donald E...ELECTRONIC WARFARE M-ON- N DIGITAL SIMULATION LOGGING REQUIREMENTS AND HDF5: A PRELIMINARY ANALYSIS 1. INTRODUCTION HDF5 technology [Folk] has been

  18. Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release

    Science.gov (United States)

    Rakhmatullina, Ekaterina; Bossen, Anke; Höschele, Christoph; Wang, Xiaojie; Beyeler, Barbara; Meier, Christoph; Lussi, Adrian

    2011-10-01

    We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration was compared to the increase of enamel roughness. Surface roughness was measured by optical analysis, and the observed tendency was correlated with scanning electron microscopy images of eroded enamel. A high correlation between specular reflection intensity and measurement of enamel softening (r2 >= -0.86) as well as calcium release (r2 >= -0.86) was found during erosion progression. Measurement of diffuse reflection revealed higher tooth-to-tooth deviation in contrast to the analysis of specular reflection intensity and lower correlation with other applied methods (r2 = 0.42-0.48). The proposed optical method allows simple and fast surface analysis and could be used for further optimization and construction of the first noncontact and cost-effective diagnostic tool for early erosion assessment in vivo.

  19. Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release

    Science.gov (United States)

    Rakhmatullina, Ekaterina; Bossen, Anke; Höschele, Christoph; Wang, Xiaojie; Beyeler, Barbara; Meier, Christoph; Lussi, Adrian

    2011-01-01

    We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration was compared to the increase of enamel roughness. Surface roughness was measured by optical analysis, and the observed tendency was correlated with scanning electron microscopy images of eroded enamel. A high correlation between specular reflection intensity and measurement of enamel softening (r2 ≥ −0.86) as well as calcium release (r2 ≥ −0.86) was found during erosion progression. Measurement of diffuse reflection revealed higher tooth-to-tooth deviation in contrast to the analysis of specular reflection intensity and lower correlation with other applied methods (r2 = 0.42–0.48). The proposed optical method allows simple and fast surface analysis and could be used for further optimization and construction of the first noncontact and cost-effective diagnostic tool for early erosion assessment in vivo. PMID:22029364

  20. Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release.

    Science.gov (United States)

    Rakhmatullina, Ekaterina; Bossen, Anke; Höschele, Christoph; Wang, Xiaojie; Beyeler, Barbara; Meier, Christoph; Lussi, Adrian

    2011-10-01

    We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration was compared to the increase of enamel roughness. Surface roughness was measured by optical analysis, and the observed tendency was correlated with scanning electron microscopy images of eroded enamel. A high correlation between specular reflection intensity and measurement of enamel softening (r(2) ≥ -0.86) as well as calcium release (r(2) ≥ -0.86) was found during erosion progression. Measurement of diffuse reflection revealed higher tooth-to-tooth deviation in contrast to the analysis of specular reflection intensity and lower correlation with other applied methods (r(2) = 0.42-0.48). The proposed optical method allows simple and fast surface analysis and could be used for further optimization and construction of the first noncontact and cost-effective diagnostic tool for early erosion assessment in vivo.

  1. Preliminary hazards analysis of thermal scrap stabilization system. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, W.S.

    1994-08-23

    This preliminary analysis examined the HA-21I glovebox and its supporting systems for potential process hazards. Upon further analysis, the thermal stabilization system has been installed in gloveboxes HC-21A and HC-21C. The use of HC-21C and HC-21A simplified the initial safety analysis. In addition, these gloveboxes were cleaner and required less modification for operation than glovebox HA-21I. While this document refers to glovebox HA-21I for the hazards analysis performed, glovebox HC-21C is sufficiently similar that the following analysis is also valid for HC-21C. This hazards analysis document is being re-released as revision 1 to include the updated flowsheet document (Appendix C) and the updated design basis (Appendix D). The revised Process Flow Schematic has also been included (Appendix E). This Current revision incorporates the recommendations provided from the original hazards analysis as well. The System Design Description (SDD) has also been appended (Appendix H) to document the bases for Safety Classification of thermal stabilization equipment.

  2. Analysis preliminary phytochemical raw extract of leaves Nephrolepis pectinata

    Directory of Open Access Journals (Sweden)

    Natally Marreiros Gomes

    2017-06-01

    Full Text Available The Nephrolepis pectinata popularly known as paulista fern, ladder-heaven, cat tail, belongs to the family Davalliaceae. For the beauty of the arrangements of their leaves ferns are quite commercialized in Brazil, however, have not been described in the literature studies on their pharmacological potential. Thus, the objective of this research was to analyze the phytochemical properties of the crude extract of the leaves of Nephrolepis pectinata. To perform the phytochemical analysis were initially made the collection of the vegetable, preparation of voucher specimen, washing, drying and grinding. Then, extraction by percolation method and end the phytochemical analysis. Preliminary results phytochemicals the crude extract of the leaves of Nephrolepis pectinata tested positive for reducing sugars, phenols/tannins (catechins tannins and catechins.

  3. Preliminary Analysis of Slope Stability in Kuok and Surrounding Areas

    Directory of Open Access Journals (Sweden)

    Dewandra Bagus Eka Putra

    2016-12-01

    Full Text Available The level of slope influenced by the condition of the rocks beneath the surface. On high level of slopes, amount of surface runoff and water transport energy is also enlarged. This caused by greater gravity, in line with the surface tilt from the horizontal plane. In other words, topsoil eroded more and more. When the slope becomes twice as steep, then the amount of erosion per unit area be 2.0 - 2.5 times more. Kuok and surrounding area is the road access between the West Sumatra and Riau which plays an important role economies of both provinces. The purpose of this study is to map the locations that have fairly steep slopes and potential mode of landslides. Based on SRTM data obtained,  the roads in Kuok area has a minimum elevation of + 33 m and a maximum  + 217.329 m. Rugged road conditions with slope ranging from 24.08 ° to 44.68 ° causing this area having frequent landslides. The result of slope stability analysis in a slope near the Water Power Plant Koto Panjang, indicated that mode of active failure is toppling failure or rock fall and the potential zone of failure is in the center part of the slope.

  4. Erosion sculptures

    Science.gov (United States)

    Ristroph, Leif; Moore, M. N. J.; Childress, Stephen; Shelley, Michael; Zhang, Jun

    2012-11-01

    Erosion by flowing fluids carves the striking landscapes imprinted on the Earth and on the surfaces of our neighboring worlds. In these processes, solid boundaries both influence and are shaped by the surrounding fluid, but the emergence of morphology as a result of this interaction is not well understood. We study the coevolution of shape and flow in the context of clay bodies immersed in fast flowing water. Although commonly viewed as a smoothing process, we discover that erosion sculpts surprisingly sharp points and corners that persist as the body shrinks. These features result from a natural tendency to form surfaces that erode uniformly, and we argue that this principle may also apply to the more complex scenarios that occur in nature.

  5. Potential landslide activity affecting the archaeological site of Orongo (Easter Island-Chile): preliminary analysis

    Science.gov (United States)

    Margottini, C.; Delmonaco, G.; Spizzichino, D.; Pandolfi, O.; Crisostomo, R.; Nohe, S.

    2009-04-01

    landslide crowns are currently located in the same level some hundreds m at west, just below the plain where Orongo is founded, threatening the stability of the petroglyphs area. According to the above observations, although after preliminary superficial surveys, the potential landslide evolution of the area may be the following: i) slope toe affected by coastal erosion; ii) triggering of debris slide/fall in the middle-upper portion of the slope with failure depth of ca. 2.5-4m; iii) increasing of stress and retrogressive landslide activity (debris-slide) towards the crest zone. A possible development of the research will be based on implementation of a multi-temporal analysis of landslide activity through a 3D-GIS modeling coupled with a back analysis in order to define present slope stability conditions and possible evolution of the slope. This to provide useful tools for local authorities in implementing preventive landslide risk mitigation measures for the protection of the cultural heritage in Orongo.

  6. Solar Stirling power generation - Systems analysis and preliminary tests

    Science.gov (United States)

    Selcuk, M. K.; Wu, Y.-C.; Moynihan, P. I.; Day, F. D., III

    1977-01-01

    The feasibility of an electric power generation system utilizing a sun-tracking parabolic concentrator and a Stirling engine/linear alternator is being evaluated. Performance predictions and cost analysis of a proposed large distributed system are discussed. Design details and preliminary test results are presented for a 9.5 ft diameter parabolic dish at the Jet Propulsion Laboratory (Caltech) Table Mountain Test Facility. Low temperature calorimetric measurements were conducted to evaluate the concentrator performance, and a helium flow system is being used to test the solar receiver at anticipated working fluid temperatures (up to 650 or 1200 C) to evaluate the receiver thermal performance. The receiver body is designed to adapt to a free-piston Stirling engine which powers a linear alternator assembly for direct electric power generation. During the next phase of the program, experiments with an engine and receiver integrated into the concentrator assembly are planned.

  7. Primate phylogeny studied by comparative determinant analysis. A preliminary report.

    Science.gov (United States)

    Bauer, K

    1993-01-01

    In this preliminary report the divergence times for the major primate groups are given, calculated from a study by comparative determinant analysis of 69 proteins (equaling 0.1% of the whole genetic information). With an origin of the primate order set at 80 million years before present, the ages of the last common ancestors (LCAs) of man and the major primate groups obtained this way are as follows: Pan troglodytes 5.2; Gorilla gorilla 7.4; Pongo pygmaeus 19.2; Hylobates lar 20.3; Old World monkeys 31.4; Lagothrix lagotricha 46.0; Cebus albifrons 59.5; three lemur species 67.0, and Galago crassicaudatus 73.3 million years. The LCA results and the approach are shortly discussed. A full account of this extended investigation including results on nonprimate mammals and on the determinant structures and the immunologically derived evolutionary rates of the proteins analyzed will be published elsewhere.

  8. PRELIMINARY PHYTOCHEMICAL ANALYSIS OF ACTINIOPTERIS RADIATA (SWARTZ LINK.

    Directory of Open Access Journals (Sweden)

    R. Manonmani

    2013-06-01

    Full Text Available The objective of the present study was to find out the presence of preliminary phytochemicals in six different solvent extracts of Actiniopteris radiata (Swartz link. by qualitative screening methods. The solvent used for the extraction of leaf and rhizome powder were ethanol, petroleum ether, chloroform, acetone, DMSO and aqueous. The secondary metabolites such as steroids, triterpenoids, reducing sugars, sugars, alkaloids, phenolic compounds, catechins, flavonoids, saponins, tannins, anthroquinones and amino acids were screened by using standard methods. The phytochemical analysis of the ethanolic extract of both (leaf & rhizome revealed the presence of most active constituents than the other solvents. The ethanolic rhizome extracts of Actiniopteris radiata showed higher amount of phytochemicals when compared with the ethanolic leaf extracts.

  9. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    Yi DAI; Zhao-jun WANG; Chang-liang ZOU

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method.Sullivan and woodall pointed out the test statistic lrt (n1, n2) is approximately distributed as x2 (2) as the sample size n, n1 and n2 are very large, and the value of n1 = 2, 3,..., n- 2 and that of n2 = n- n1.So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained.In addition, the properties of the standardized likelihood ratio statistic slr(n1,n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i ≠ n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both.Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  10. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method. Sullivan and woodall pointed out the test statistic lrt(n1, n2) is approximately distributed as x2(2) as the sample size n,n1 and n2 are very large, and the value of n1 = 2,3,..., n - 2 and that of n2 = n - n1. So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained. In addition, the properties of the standardized likelihood ratio statistic slr(n1, n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i≠n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both. Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  11. Application of spatial Markov chains to the analysis of the temporal-spatial evolution of soil erosion.

    Science.gov (United States)

    Liu, Ruimin; Men, Cong; Wang, Xiujuan; Xu, Fei; Yu, Wenwen

    Soil and water conservation in the Three Gorges Reservoir Area of China is important, and soil erosion is a significant issue. In the present study, spatial Markov chains were applied to explore the impacts of the regional context on soil erosion in the Xiangxi River watershed, and Thematic Mapper remote sensing data from 1999 and 2007 were employed. The results indicated that the observed changes in soil erosion were closely related to the soil erosion levels of the surrounding areas. When neighboring regions were not considered, the probability that moderate erosion transformed into slight and severe erosion was 0.8330 and 0.0049, respectively. However, when neighboring regions that displayed intensive erosion were considered, the probabilities were 0.2454 and 0.7513, respectively. Moreover, the different levels of soil erosion in neighboring regions played different roles in soil erosion. If the erosion levels in the neighboring region were lower, the probability of a high erosion class transferring to a lower level was relatively high. In contrast, if erosion levels in the neighboring region were higher, the probability was lower. The results of the present study provide important information for the planning and implementation of soil conservation measures in the study area.

  12. Modeling and analysis of Soil Erosion processes by the River Basins model: The Case Study of the Krivacki Potok Watershed, Montenegro

    Science.gov (United States)

    Vujacic, Dusko; Barovic, Goran; Mijanovic, Dragica; Spalevic, Velibor; Curovic, Milic; Tanaskovic, Vjekoslav; Djurovic, Nevenka

    2016-04-01

    The objective of this research was to study soil erosion processes in one of Northern Montenegrin watersheds, the Krivacki Potok Watershed of the Polimlje River Basin, using modeling techniques: the River Basins computer-graphic model, based on the analytical Erosion Potential Method (EPM) of Gavrilovic for calculation of runoff and soil loss. Our findings indicate a low potential of soil erosion risk, with 554 m³ yr-1 of annual sediment yield; an area-specific sediment yield of 180 m³km-2 yr-1. The calculation outcomes were validated for the entire 57 River Basins of Polimlje, through measurements of lake sediment deposition at the Potpec hydropower plant dam. According to our analysis, the Krivacki Potok drainage basin is with the relatively low sediment discharge; according to the erosion type, it is mixed erosion. The value of the Z coefficient was calculated on 0.297, what indicates that the river basin belongs to 4th destruction category (of five). The calculated peak discharge from the river basin was 73 m3s-1 for the incidence of 100 years and there is a possibility for large flood waves to appear in the studied river basin. Using the adequate computer-graphic and analytical modeling tools, we improved the knowledge on the soil erosion processes of the river basins of this part of Montenegro. The computer-graphic River Basins model of Spalevic, which is based on the EPM analytical method of Gavrilovic, is highly recommended for soil erosion modelling in other river basins of the Southeastern Europe. This is because of its reliable detection and appropriate classification of the areas affected by the soil loss caused by soil erosion, at the same time taking into consideration interactions between the various environmental elements such as Physical-Geographical Features, Climate, Geological, Pedological characteristics, including the analysis of Land Use, all calculated at the catchment scale.

  13. Analysis of cathode geometry to minimize cathode erosion in direct current microplasma jet

    Energy Technology Data Exchange (ETDEWEB)

    Causa, Federica [Dipartimento di Scienze dell' Ambiente, della Sicurezza, del Territorio, degli Alimenti e della Salute, Universita degli studi di Messina, 98122 Messina (Italy); Ghezzi, Francesco; Caniello, Roberto; Grosso, Giovanni [Istituto di Fisica del Plasma, Consiglio Nazionale delle Ricerche, EURATOM-ENEA-CNR Association, Via R. Cozzi 53, 20125 Milano (Italy); Dellasega, David [Istituto di Fisica del Plasma, Consiglio Nazionale delle Ricerche, EURATOM-ENEA-CNR Association, Via R. Cozzi 53, 20125 Milano (Italy); Dipartimento di Energia, Politecnico di Milano, Via Ponzio 34/3, 20133 Milano (Italy)

    2012-12-15

    Microplasma jets are now widely used for deposition, etching, and materials processing. The present study focuses on the investigation of the influence of cathode geometry on deposition quality, for microplasma jet deposition systems in low vacuum. The interest here is understanding the influence of hydrogen on sputtering and/or evaporation of the electrodes. Samples obtained with two cathode geometries with tapered and rectangular cross-sections have been investigated experimentally by scanning electron microscopy and energy dispersion X-ray spectroscopy. Samples obtained with a tapered-geometry cathode present heavy contamination, demonstrating cathode erosion, while samples obtained with a rectangular-cross-section cathode are free from contamination. These experimental characteristics were explained by modelling results showing a larger radial component of the electric field at the cathode inner wall of the tapered cathode. As a result, ion acceleration is larger, explaining the observed cathode erosion in this case. Results from the present investigation also show that the ratio of radial to axial field components is larger for the rectangular geometry case, thus, qualitatively explaining the presence of micro-hollow cathode discharge over a wide range of currents observed in this case. In the light of the above findings, the rectangular cathode geometry is considered to be more effective to achieve cleaner deposition.

  14. Al-MoSi2 Composite Materials: Analysis of Microstructure, Sliding Wear, Solid Particle Erosion, and Aqueous Corrosion

    Science.gov (United States)

    Gousia, V.; Tsioukis, A.; Lekatou, A.; Karantzalis, A. E.

    2016-08-01

    In this effort, AMCs reinforced with new intermetallic phases, were produced through casting and compared as far as their microstructure, sliding wear, solid particle erosion, and aqueous corrosion response. Casting was selected as a production method based on the concept: (a) ease-to-handle and low cost production route and (b) optimum homogeneity of the reinforcing phase distribution. The MoSi2 phase was produced through vacuum arc melting and the resulting drops were milled for 30 h to produce fine powder, the characteristics of which were ascertained through SEM-EDS and XRD analysis. MoSi2 was used as precursor source for the final reinforcing phase. The powder material was incorporated in molten Al1050 alloy to additions of 2, 5 and 10 vol.% respectively. Extensive reactivity between the molten Al and the MoSi2 particles was observed, leading to the formation of new reinforcing phases mainly of the Al-Mo system. In all cases, a uniform particle distribution was observed, mainly characterized by isolated intermetallic phases and few intermetallic phase clusters. Sliding wear showed a beneficial action of the reinforcing phase on the wear of the composites. Surface oxidation, plastic deformation, crack formation, and debris abrasive action were the main degradation features. The results of solid particle erosion showed that the mechanism is different as the impact angle and the vol.% change. Regarding the corrosion, the analysis revealed localized corrosion effects. The composite behavior was not altered significantly compared to that of the monolithic matrix.

  15. Contrasting Modern and 10Be- derived erosion rates for the Southern Betic Cordillera, Spain

    Science.gov (United States)

    Bellin, N.; Vanacker, V.; Kubik, P.

    2012-04-01

    In Europe, Southeast Spain was identified as one of the regions with major treat of desertification in the context of future land use and climate change. During the last years, significant progress has been made to understand spatial patterns of modern erosion rates in these semi-arid degraded environments. Numerous European projects have contributed to the collection of modern erosion data at different spatial scales for Southeast Spain. However, these data are rarely analysed in the context of long-term changes in vegetation, climate and human occupation. In this paper, we present Modern and Holocene denudation rates for small river basins (1 to 10 km2) located in the Spanish Betic Cordillera. Long-term erosion data were derived from cosmogenic nuclide analyses of river-borne sediment. Modern erosion data were quantified through analysis of sediment deposition volumes behind check dams, and represent average erosion rates over the last 10 to 40 years. Modern erosion rates are surprisingly low (mean erosion rate = 0.048 mm y-1; n=36). They indicate that the steep, sparsely vegetated hillslopes in the Betic Cordillera cannot directly be associated with high erosion rates. 10Be -derived erosion rates integrate over the last 37500 to 3500 years, and are roughly of the same magnitude. They range from 0.013 to 0.243 mm y-1 (mean denudation rate = 0.062 mm y-1 ± 0.054; n=20). Our data suggest that the modern erosion rates are similar to the long-term erosion rates in this area. This result is in contrast with the numerous reports on human-accelerated modern erosion rates for Southeast Spain. Interestingly, our new data on long-term erosion rates show a clear spatial pattern, with higher erosion rates in the Sierra Cabrera and lower erosion rates in Sierra de las Estancias, and Sierra Torrecilla. Preliminary geomorphometric analyses suggest that the spatial variation that we observe in long-term erosion rates is related to the gradient in uplift rates of the Betic

  16. Evaluating the influence of physical, economic and managerial factors on sheet erosion in rangelands of SW Spain by performing a sensitivity analysis on an integrated dynamic model.

    Science.gov (United States)

    Ibáñez, J; Lavado Contador, J F; Schnabel, S; Martínez Valderrama, J

    2016-02-15

    An integrated dynamic model was used to evaluate the influence of climatic, soil, pastoral, economic and managerial factors on sheet erosion in rangelands of SW Spain (dehesas). This was achieved by means of a variance-based sensitivity analysis. Topsoil erodibility, climate change and a combined factor related to soil water storage capacity and the pasture production function were the factors which influenced water erosion the most. Of them, climate change is the main source of uncertainty, though in this study it caused a reduction in the mean and the variance of long-term erosion rates. The economic and managerial factors showed scant influence on soil erosion, meaning that it is unlikely to find such influence in the study area for the time being. This is because the low profitability of the livestock business maintains stocking rates at low levels. However, the potential impact of livestock, through which economic and managerial factors affect soil erosion, proved to be greater in absolute value than the impact of climate change. Therefore, if changes in some economic or managerial factors led to higher stocking rates in the future, significant increases in erosion rates would be expected.

  17. Tracing erosion patterns in Taiwan by quantitative provenance and geomorphological analysis

    Science.gov (United States)

    Resentini, Alberto; Goren, Liran; Castelltort, Sebastien; Garzanti, Eduardo

    2016-04-01

    Taiwan is one of the world's foremost natural laboratories for studies of orogenesis. After only a few Ma of ongoing collision between the Chinese continental margin and the Luzon Arc, the associated orogen has reached nearly 4 km in height and 100-150 km in width. High rates of convergence leading to rapid rock uplift combine with the wet stormy climate of the sub-tropical typhoon belt to deliver annually an average detrital mass of 9500 t/km2. The doubly-vergent thrust belt is composed of more than 85% of sedimentary rocks dominant in the pro-wedge, but metamorphic rocks as young as Journal of Geophysical Research: Earth Surface 119:1853-1875. Willett S.D., Fisher D., Fuller C., Yeh E.C., Lu C.Y. 2003. Erosion rates and orogenic-wedge kinematics in Taiwan inferred from fission-track thermochronometry. Geology 31:945-948.

  18. Quantitative analysis of soil erosion in ecologically and conventionally cultivated vineyards

    Science.gov (United States)

    Adrian, Alexander; Brings, Christine; Rodrigo Comino, Jesús; Seeger, Manuel; Ries, Johannes B.

    2016-04-01

    Long term observations of soil erosion in vineyards showed that they are generally stable. But the soil erosion rates reach very varying dimensions by the increased occurrence of extreme rainfall events or under the influence of different soil and vineyard management. To identify the differences between an ecologically (with natural vegetation cover under and around the vines) and conventionally cultivated vineyard, in 2014 six sediment traps were installed on a south-west exposed slope of the Rhenish Slate Mountains, West Germany. The research area is part of Saar terrace (around 180 meter high above sea level), a tributary of the Moselle, so the substrate is made of clay stone and gravel sand. Sediment traps allow in-situ measurements during a natural rainfall event. By dint of them the overland flow and sediment can be collected. The sediment traps were placed in a row in the middle of the slope, in the steepest part (averaged 23°). They were emptied weekly. Runoff and sediments were divided by the gravimetric filtering method. The results show more collected runoff and sediment in the conventional vineyard than in the ecological. The sum of the runoffs amounts to 75 liter in the conventional vineyard, 29 liter for the ecological old and 0.73 liter for the ecological young vineyard. The amount of sediment of conventional vineyard (403 g) was five times higher than in the ecological one (79 g). The causes lay in the low vegetation cover and existing traffic lines in the conventional vineyard. But the highest sediment concentration has been detected in the ecological young vineyard.

  19. Water erosion and climate change in a small alpine catchment

    Science.gov (United States)

    Berteni, Francesca; Grossi, Giovanna

    2017-04-01

    WATER EROSION AND CLIMATE CHANGE IN A SMALL ALPINE CATCHMENT Francesca Berteni, Giovanna Grossi A change in the mean and variability of some variables of the climate system is expected to affect the sediment yield of mountainous areas in several ways: for example through soil temperature and precipitation peak intensity change, permafrost thawing, snow- and ice-melt time shifting. Water erosion, sediment transport and yield and the effects of climate change on these physical phenomena are the focus of this work. The study area is a small mountainous basin, the Guerna creek watershed, located in the Central Southern Alps. The sensitivity of sediment yield estimates to a change of condition of the climate system may be investigated through the application of different models, each characterized by its own features and limits. In this preliminary analysis two different empirical mathematical models are considered: RUSLE (Revised Universal Soil Loss Equation; Renard et al., 1991) and EPM (Erosion Potential Method; Gavrilovic, 1988). These models are implemented in a Geographical Information System (GIS) supporting the management of the territorial database used to estimate relevant geomorphological parameters and to create different thematic maps. From one side the geographical and geomorphological information is required (land use, slope and hydrogeological instability, resistance to erosion, lithological characterization and granulometric composition). On the other side the knowledge of the weather-climate parameters (precipitation and temperature data) is fundamental as well to evaluate the intensity and variability of the erosive processes and estimate the sediment yield at the basin outlet. Therefore different climate change scenarios were considered in order to tentatively assess the impact on the water erosion and sediment yield at the small basin scale. Keywords: water erosion, sediment yield, climate change, empirical mathematical models, EPM, RUSLE, GIS

  20. Preliminary analysis of distributed in situ soil moisture measurements

    Directory of Open Access Journals (Sweden)

    L. Brocca

    2005-01-01

    Full Text Available Surface soil moisture content is highly variable in both space and time. Remote sensing can provide an effective methodology for mapping surface moisture content over large areas but ground based measurements are required to test its reliability and to calibrate retrieval algorithms. Recently, we had the opportunity to design and perform an experiment aimed at jointly acquiring measurements of surface soil water content at various locations and remotely sensed hyperspectral data. The area selected for the experiment is located in central Umbria and it extends for 90km2. For the area, detailed lithological and multi-temporal landslide inventory maps were available. We identified eight plots where measurements of soil water content were made using a Time Domain Reflectometer (TDR. The plots range in size from 100m2 to 600m2, and cover a variety of topographic and morphological settings. The TDR measurements were conducted during four days, on 5 April, 15 April, 2 May and 3 May 2004. On 3 May the NERC airborne CASI 2 acquired the hyperspectral data. Preliminary analysis concerning the matching between the landslides and the soil moisture were reported. Statistical and geostatistical analysis investigating the spatial-temporal soil moisture distribution were performed. These results will be compared with the data of surface temperature obtained from the remotely sensed hyperspectral sensor.

  1. Carbon Erosion in the Great Karoo Region of South Africa

    Science.gov (United States)

    Krenz, Juliane; Greenwood, Philip; Kuhn, Brigitte; Foster, Ian; Boardman, John; Meadows, Mike; Kuhn, Nikolaus

    2015-04-01

    Work undertaken in the seasonally arid upland areas of the Great Karoo region of South Africa has established a link between land degradation and overgrazing which began in the second half of the 18th century when European farmers first settled the area. Ongoing land use change and shifting rainfall patterns resulted in the development of badlands on foot slopes of upland areas, and gully systems on valley bottoms. As a consequence of agricultural intensification and overgrazing, accompanied by a higher water demand, many small reservoirs were constructed, most of which are now in-filled with sediment. The deposited material serves as an environmental archive by which land use change over the last 100 years can be analysed, but with a particular focus on erosion and deposition of soil-associated carbon (C). It is assumed that erosion caused an initial flush of carbon rich soil which was subsequently buried and stored off-site. Despite this assumption, however the net-effect of erosion on carbon dioxide emissions is still unknown. In this project, preliminary results are presented from an investigation to determine whether land degradation in the Karoo has resulted in a shift from a net sink of C to a net source of C. Firstly, a high resolution digital elevation model was generated and erosion modelling was then employed to create an erosion risk map showing areas most prone to erosion. Information from the model output then served as the basis for ground-truthing and on-site erosion mapping. Secondly, sediment deposits from silted reservoirs were analysed for varying physicochemical parameters, in order to reconstruct spatial patterns of erosion and deposition. Analysis of total carbon (TC) content revealed a sharp decrease with decreasing depth. This provisionally suggests that land degradation during and after post-European settlement probably led to accelerated erosion of the relatively fertile surface soils. This presumably resulted in the rapid in-filling of

  2. Spatial analysis of the impact of land-use on surface runoff and soil erosion-a case study of western Jilin

    Institute of Scientific and Technical Information of China (English)

    Juana P Moiwo

    2006-01-01

    The impact of land-use on surface runoff and soil erosion is still poorly understood at basin scale. Thus in the Western Jilin Ecosystem (WJE), surface runoff and soil erosion were measured against identified land-use types in the basin. Due to the spatial nature of the analysis, GIS ArcMap version 9.1 and the WetSpass model were used in the simulation process. In the study, the WetSpass model was extended with the Dynamic Sediment Balance Equation (Ziegler et al., 1997), to simulate and quantify soil erosion. A hypothetical natural grassland scenario was developed for the study area and compared with the present land-use management conditions. The results indicate significant differences in runoff and soil erosion across the different land-use types both within and between the two scenarios. Calculated averages of surface runoff and soil erosion for the present land-use management were 48.03 mm/a and 83.43 kg/(m2·a) respectively. Those for the hypothetical natural grassland scenario were 24.70 mm/a and 78.36 kg/m2·a) . Thus an overall decrease in runoff and soil erosion was observed as the conditions changed from the present land-use management to the hypothetical natural grassland state. Under the present land-use management, urban settlements exhibited the highest surface runoff but one of the least soil erosions, while bare-lands showed the highest soil erosion. It was more generally observed that runoff and erosion varies with vegetation type/density. It was concluded based on the research findings that the present land-use management might not be the best scenario for the ecosystem as it showed increased basin runoff and soil erosion in comparison with the natural grassland vegetation. Since no best scenario was simulated for or advanced in the study, further research to develop a more balanced land management system is thus required. The findings of the study can assist in the identification of vulnerable/fragile ecosystems in the basin and to guide

  3. Grid-connected ICES: preliminary feasibility analysis and evaluation. Volume 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1977-06-30

    The HEAL Complex in New Orleans will serve as a Demonstration Community for which the ICES Demonstration System will be designed. The complex is a group of hospitals, clinics, research facilities, and medical educational facilities. The five tasks reported on are: preliminary energy analysis; preliminary institutional assessment; conceptual design; firming-up of commitments; and detailed work management plan.

  4. Purification, crystallization and preliminary X-ray analysis of struthiocalcin 1 from ostrich (Struthio camelus) eggshell

    Energy Technology Data Exchange (ETDEWEB)

    Reyes-Grajeda, Juan Pablo [Unidad de Proteómica Médica, Instituto Nacional de Medicina Genómica, Mexico City (Mexico); Marín-García, Liliana [Instituto de Química, Universidad Nacional Autónoma de México (Mexico); Stojanoff, Vivian [Brookhaven National Laboratories, NSLS, Upton, New York (United States); Moreno, Abel, E-mail: carcamo@servidor.unam.mx [Instituto de Química, Universidad Nacional Autónoma de México (Mexico); Unidad de Proteómica Médica, Instituto Nacional de Medicina Genómica, Mexico City (Mexico)

    2007-11-01

    The purification, crystallization and preliminary X-ray diffraction data of the protein struthiocalcin 1 isolated from ostrich eggshell are reported. The purification, crystallization and preliminary X-ray analysis of struthiocalcin 1 (SCA-1), a protein obtained from the intramineral part of ostrich (Struthio camelus) eggshell, is reported.

  5. Investigation of Sorption and Diffusion Mechanisms, and Preliminary Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bhave, Ramesh R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jubin, Robert Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Spencer, Barry B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nair, Sankar [Georgia Inst. of Technology, Atlanta, GA (United States)

    2017-02-01

    This report describes the synthesis and evaluation of molecular sieve zeolite membranes to separate and concentrate tritiated water (HTO) from dilute HTO-bearing aqueous streams. Several monovalent and divalent cation exchanged silico alumino phosphate (SAPO-34) molecular sieve zeolite membranes were synthesized on disk supports and characterized with gas and vapor permeation measurements. The pervaporation process performance was evaluated for the separation and concentration of tritiated water. Experiments were performed using tritiated water feed solution containing tritium at the high end of the range (1 mCi/mL) anticipated in a nuclear fuel processing system that includes both acid and water streams recycling. The tritium concentration was about 0.1 ppm. The permeate was recovered under vacuum. The HTO/H2O selectivity and separation factor calculated from the measured tritium concentrations ranged from 0.99 to 1.23, and 0.83-0.98, respectively. Although the membrane performance for HTO separation was lower than expected, several encouraging observations including molecular sieving and high vapor permeance are reported. Additionally, several new approaches are proposed, such as tuning the sorption and diffusion properties offered by small pore LTA zeolite materials, and cation exchanged aluminosilicates with high metal loading. It is hypothesized that substantially improved preferential transport of tritium (HTO) resulting in a more concentrated permeate can be achieved. Preliminary economic analysis for the membrane-based process to concentrate tritiated water is also discussed.

  6. Crystallization and preliminary crystallographic analysis of recombinant human galectin-1

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Stacy A. [Institute for Glycomics, Gold Coast Campus, Griffith University, Queensland 4222 (Australia); Scott, Ken [School of Biological Sciences, University of Auckland, Auckland (New Zealand); Blanchard, Helen, E-mail: h.blanchard@griffith.edu.au [Institute for Glycomics, Gold Coast Campus, Griffith University, Queensland 4222 (Australia)

    2007-11-01

    Human galectin-1 has been cloned, expressed in E. coli, purified and crystallized in the presence of both lactose (ligand) and β-mercaptoethanol under six different conditions. The X-ray diffraction data obtained have enabled the assignment of unit-cell parameters for two novel crystal forms of human galectin-1. Galectin-1 is considered to be a regulator protein as it is ubiquitously expressed throughout the adult body and is responsible for a broad range of cellular regulatory functions. Interest in galectin-1 from a drug-design perspective is founded on evidence of its overexpression by many cancers and its immunomodulatory properties. The development of galectin-1-specific inhibitors is a rational approach to the fight against cancer because although galectin-1 induces a plethora of effects, null mice appear normal. X-ray crystallographic structure determination will aid the structure-based design of galectin-1 inhibitors. Here, the crystallization and preliminary diffraction analysis of human galectin-1 crystals generated under six different conditions is reported. X-ray diffraction data enabled the assignment of unit-cell parameters for crystals grown under two conditions, one belongs to a tetragonal crystal system and the other was determined as monoclinic P2{sub 1}, representing two new crystal forms of human galectin-1.

  7. Preliminary radiation criteria and nuclear analysis for ETF

    Energy Technology Data Exchange (ETDEWEB)

    Engholm, B.A.

    1980-09-01

    Preliminary biological and materials radiation dose criteria for the Engineering Test Facility are described and tabulated. In keeping with the ETF Mission Statement, a key biological dose criterion is a 24-hour shutdown dose rate of 2 mrem/hr on the surface of the outboard bulk shield. Materials dose criteria, which primarily govern the inboard shield design, include 10/sup 9/ rads exposure limit to epoxy insulation, 3 x 10/sup -4/ dpa damage to the TF coil copper stabilizer, and a total nuclear heating rate of 5 kW in the inboard TF coils. Nuclear analysis performed during FY 80 was directed primarily at the inboard and outboard bulk shielding, and at radiation streaming in the neutral beam drift ducts. Inboard and outboard shield thicknesses to achieve the biological and materials radiation criteria are 75 cm inboard and 125 cm outboard, the configuration consisting of alternating layers of stainless steel and borated water. The outboard shield also includes a 5 cm layer of lead. NBI duct streaming analyses performed by ORNL and LASL will play a key role in the design of the duct and NBI shielding in FY 81. The NBI aluminum cryopanel nuclear heating rate during the heating cycle is about 1 milliwatt/cm/sup 3/, which is far less than the permissible limit.

  8. Preliminary analysis of aerial hyperspectral data on shallow lacustrine waters

    Science.gov (United States)

    Bianchi, Remo; Castagnoli, A.; Cavalli, Rosa M.; Marino, Carlo M.; Pignatti, Stefano; Zilioli, Eugenio

    1995-11-01

    The availability of MIVIS hyperspectral data, deriving from an aerial survey recently performed over a test-site in Lake Garda, Italy, gave the possibility of a preliminary new insight in the field of specific applications of remote sensing to shallow water analysis. The spectroradiometers in the visible and in the thermal infrared were explored in particular, accessing to helpful information for the detection of bio-physical indicators of water quality, either related to the surface/sub-surface of waters or to the bottom of the lake, since the study area presents very shallow waters, never exceeding a 6-meter depth in any case. Primary interest was the detection of man-induced activities along the margins, like sewage effect and sedimentary structure in the bottom or algal bloom. Secondly, a correlation between absorbivity coefficients in the visible bands and bathimetric contour lines in the proximity of the marginal zone of the lake was accomplished, by means of two indicative spectroradiometric transects.

  9. Analysis of the Early Stages and Evolution of Dental Enamel Erosion.

    Science.gov (United States)

    Derceli, Juliana Dos Reis; Faraoni, Juliana Jendiroba; Pereira-da-Silva, Marcelo Assumpção; Palma-Dibb, Regina Guenka

    2016-01-01

    The aim of this study was to evaluate by atomic force microscopy (AFM) the early phases and evolution of dental enamel erosion caused by hydrochloric acid exposure, simulating gastroesophageal reflux episodes. Polished bovine enamel slabs (4x4x2 mm) were selected and exposed to 0.1 mL of 0.01 M hydrochloric acid (pH=2) at 37 ?#61472;?#61616;C using five different exposure intervals (n=1): no acid exposure (control), 10 s, 20 s, 30 s and 40 s. The exposed area was analyzed by AFM in 3 regions to measure the roughness, surface area and morphological surface. The data were analyzed qualitatively. Roughness started as low as that of the control sample, Rrms=3.5 nm, and gradually increased at a rate of 0.3 nm/s, until reaching Rrms=12.5 nm at 30 s. After 40 s, the roughness presented increment of 0.40 nm only. Surface area (SA) increased until 20 s, and for longer exposures, the surface area was constant (at 30 s, SA=4.40 μm2 and at 40 s, SA=4.43 μm2). As regards surface morphology, the control sample presented smaller hydroxyapatite crystals (22 nm) and after 40 s the crystal size was approximately 60 nm. Short periods of exposure were sufficient to produce enamel demineralization in different patterns and the morphological structure was less affected by exposure to hydrochloric acid over 30 s.

  10. Scaling in landscape erosion: Renormalization group analysis of a model with infinitely many couplings

    Science.gov (United States)

    Antonov, N. V.; Kakin, P. I.

    2017-02-01

    Applying the standard field theory renormalization group to the model of landscape erosion introduced by Pastor-Satorras and Rothman yields unexpected results: the model is multiplicatively renormalizable only if it involves infinitely many coupling constants (i.e., the corresponding renormalization group equations involve infinitely many β-functions). We show that the one-loop counterterm can nevertheless be expressed in terms of a known function V (h) in the original stochastic equation and its derivatives with respect to the height field h. Its Taylor expansion yields the full infinite set of the one-loop renormalization constants, β-functions, and anomalous dimensions. Instead of a set of fixed points, there arises a two-dimensional surface of fixed points that quite probably contains infrared attractive regions. If that is the case, then the model exhibits scaling behavior in the infrared range. The corresponding critical exponents turn out to be nonuniversal because they depend on the coordinates of the fixed point on the surface, but they satisfy certain universal exact relations.

  11. Conversion Preliminary Safety Analysis Report for the NIST Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, D. J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Baek, J. S. [Brookhaven National Lab. (BNL), Upton, NY (United States); Hanson, A. L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Cheng, L-Y [Brookhaven National Lab. (BNL), Upton, NY (United States); Brown, N. [Brookhaven National Lab. (BNL), Upton, NY (United States); Cuadra, A. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-01-30

    The NIST Center for Neutron Research (NCNR) is a reactor-laboratory complex providing the National Institute of Standards and Technology (NIST) and the nation with a world-class facility for the performance of neutron-based research. The heart of this facility is the NIST research reactor (aka NBSR); a heavy water moderated and cooled reactor operating at 20 MW. It is fueled with high-enriched uranium (HEU) fuel elements. A Global Threat Reduction Initiative (GTRI) program is underway to convert the reactor to low-enriched uranium (LEU) fuel. This program includes the qualification of the proposed fuel, uranium and molybdenum alloy foil clad in an aluminum alloy, and the development of the fabrication techniques. This report is a preliminary version of the Safety Analysis Report (SAR) that would be submitted to the U.S. Nuclear Regulatory Commission (NRC) for approval prior to conversion. The report follows the recommended format and content from the NRC codified in NUREG-1537, “Guidelines for Preparing and Reviewing Applications for the Licensing of Non-power Reactors,” Chapter 18, “Highly Enriched to Low-Enriched Uranium Conversions.” The emphasis in any conversion SAR is to explain the differences between the LEU and HEU cores and to show the acceptability of the new design; there is no need to repeat information regarding the current reactor that will not change upon conversion. Hence, as seen in the report, the bulk of the SAR is devoted to Chapter 4, Reactor Description, and Chapter 13, Safety Analysis.

  12. Preliminary Analysis of Remote Monitoring & Robotic Concepts for Performance Confirmation

    Energy Technology Data Exchange (ETDEWEB)

    D.A. McAffee

    1997-02-18

    ) Identify and discuss the main Performance Confirmation monitoring needs and requirements during the post-emplacement preclosure period. This includes radiological, non-radiological, host rock, and infrastructure performance monitoring needs. It also includes monitoring for possible off-normal events. (Presented in Section 7.3). (3) Identify general approaches and methods for obtaining performance information from within the emplacement drifts for Performance Confirmation. (Presented in Section 7.4) (4)Review and discuss available technologies and design strategies that may permit the use of remotely operated systems within the hostile thermal and radiation environment expected within the emplacement drifts. (Presented in Section 7.5). (5) Based on Performance Confirmation monitoring needs and available technologies, identify potential application areas for remote systems and robotics for post-emplacement preclosure Performance Confirmation activities (Presented in Section 7.6). (6) Develop preliminary remote monitoring and robotic concepts for post-emplacement, preclosure Performance Confirmation activities. (Presented in Section 7.7) This analysis is being performed very early in the systems engineering cycle, even as issues related to the Performance Confirmation program planning phase are being formulated and while the associated needs, constraints and objectives are yet to be fully determined and defined. This analysis is part of an issue formulation effort and is primarily concerned with identification and description of key issues related to remotely monitoring repository performance for Performance Confirmation. One of the purposes of this analysis is to provide an early investigation of potential design challenges that may have a high impact on future design concepts. This analysis can be used to guide future concept development and help access what is feasible and achievable by application of remote systems technology. Future design and systems engineering

  13. Scaling in erosion of landscapes: renormalization group analysis of a model with turbulent mixing

    Science.gov (United States)

    Antonov, N. V.; Kakin, P. I.

    2017-02-01

    The model of landscape erosion, introduced in (1998 Phys. Rev. Lett. 80 4349, 1998 J. Stat. Phys. 93 477) and modified in (2016 Theor. Math. Phys. in press (arXiv:1602.00432)), is advected by anisotropic velocity field. The field is Gaussian with vanishing correlation time and the pair correlation function of the form \\propto δ ≤ft(t-{{t}\\prime}\\right)/k\\botd-1+ξ , where {{k}\\bot}=|{{\\mathbf{k}}\\bot}| and {{\\mathbf{k}}\\bot} is the component of the wave vector, perpendicular to a certain preferred direction—the d-dimensional generalization of the ensemble introduced by Avellaneda and Majda (1990 Commun. Math. Phys. 131 381). Analogous to the case without advection, the model is multiplicatively renormalizable and has infinitely many coupling constants. The one-loop counterterm is derived in a closed form in terms of the certain function V(h), entering the original stochastic equation, and its derivatives with respect to the height field h≤ft(t,\\mathbf{x}\\right) . The full infinite set of the one-loop renormalization constants, β-functions and anomalous dimensions is obtained from the Taylor expansion of the counter-term. Instead of a two-dimensional surface of fixed points there are two such surfaces; they are likely to contain infrared attractive region(s). If that is the case, the model exhibits scaling behaviour in the infrared range. The corresponding critical exponents are non-universal because they depend on the coordinates of the fixed points on the surface; they also satisfy certain universal exact relation.

  14. A Preliminary Tsunami vulnerability analysis for Bakirkoy district in Istanbul

    Science.gov (United States)

    Tufekci, Duygu; Lutfi Suzen, M.; Cevdet Yalciner, Ahmet; Zaytsev, Andrey

    2016-04-01

    Resilience of coastal utilities after earthquakes and tsunamis has major importance for efficient and proper rescue and recovery operations soon after the disasters. Vulnerability assessment of coastal areas under extreme events has major importance for preparedness and development of mitigation strategies. The Sea of Marmara has experienced numerous earthquakes as well as associated tsunamis. There are variety of coastal facilities such as ports, small craft harbors, and terminals for maritime transportation, water front roads and business centers mainly at North Coast of Marmara Sea in megacity Istanbul. A detailed vulnerability analysis for Yenikapi region and a detailed resilience analysis for Haydarpasa port in Istanbul have been studied in previously by Cankaya et al., (2015) and Aytore et al., (2015) in SATREPS project. In this study, the methodology of vulnerability analysis under tsunami attack given in Cankaya et al., (2015) is modified and applied to Bakirkoy district of Istanbul. Bakirkoy district is located at western part of Istanbul and faces to the North Coast of Marmara Sea from 28.77oE to 28.89oE. High resolution spatial dataset of Istanbul Metropolitan Municipality (IMM) is used and analyzed. The bathymetry and topography database and the spatial dataset containing all buildings/structures/infrastructures in the district are collated and utilized for tsunami numerical modeling and following vulnerability analysis. The tsunami parameters from deterministically defined worst case scenarios are computed from the simulations using tsunami numerical model NAMI DANCE. The vulnerability assessment parameters in the district according to vulnerability and resilience are defined; and scored by implementation of a GIS based TVA with appropriate MCDA methods. The risk level is computed using tsunami intensity (level of flow depth from simulations) and TVA results at every location in Bakirkoy district. The preliminary results are presented and discussed

  15. Preliminary Core Analysis of a Micro Modular Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Chang Keun; Chang, Jongwa [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Venneri, Francesco [Ultra Safe Nuclear Corporation, Los Alamos (United States); Hawari, Ayman [NC State Univ., Raleigh (United States)

    2014-05-15

    The Micro Modular Reactor (MMR) will be 'melt-down proof'(MDP) under all circumstances, including the complete loss of coolant, and will be easily transportable and retrievable, and suitable for use with very little site preparation and Balance of Plant (BOP) requirements for a variety of applications, from power generation and process heat applications in remote areas to grid-unattached locations, including ship propulsion. The Micro Modular Reactor design proposed in this paper has 3 meter diameter core (2 meter active core) which is suitable for 'factory manufactured' and has few tens year of service life for remote deployment. We confirmed the feasibility of long term service life by a preliminary neutronic analysis in terms of the excess reactivity, the temperature feedback coefficient, and the control margins. We are able to achieve a reasonably long core life time of 5 ∼ 10 years under typical thermal hydraulic condition of a helium cooled reactor. However, on a situation where longer service period and safety is important, we can reduce the power density to the level of typical pebble bed reactor. In this case we can design 10 MWt MMR with core diameter for 10 ∼ 40 years core life time without much loss in the economics. Several burnable poisons are studied and it is found that erbia mixed in the compact matrix seems reasonably good poison. The temperature feedback coefficients were remaining negative during lifetime. Drum type control rods at reflector region and few control rods inside core region are sufficient to control the reactivity during operation and to achieve safe cold shutdown state.

  16. Preliminary evaluation of diabatic heating distribution from FGGE level 3b analysis data

    Science.gov (United States)

    Kasahara, A.; Mizzi, A. P.

    1985-01-01

    A method is presented for calculating the global distribution of diabatic heating rate. Preliminary results of global heating rate evaluated from the European center for Medium Range Weather Forecasts Level IIIb analysis data is also presented.

  17. The Organic Food Market and Marketing Initiatives in Europe: a Preliminary Analysis

    DEFF Research Database (Denmark)

    Kristensen, Niels Heine; Nielsen, Thorkild; Bruselius-Jensen, Maria Louisa

    2003-01-01

    Kristensen NH, Nielsen T, Bruselius-Jensen M, Scheperlen-Bøgh P, Beckie M, Foster C, Midmore P, Padel S (2002): The Organic Food Market and Marketing Initiatives in Europe: a Preliminary Analysis. Final Report to the EU Commission......Kristensen NH, Nielsen T, Bruselius-Jensen M, Scheperlen-Bøgh P, Beckie M, Foster C, Midmore P, Padel S (2002): The Organic Food Market and Marketing Initiatives in Europe: a Preliminary Analysis. Final Report to the EU Commission...

  18. Preliminary study on washability and composition analysis of highsulfur coal in some mining areas in Guizhou

    Institute of Scientific and Technical Information of China (English)

    QIU Yue-qin; MAO Song; ZHANG Qin; TIAN Ye; LIU Zhi-hong

    2011-01-01

    Preliminary sink-float experiments on high-sulfur coal was done in some mining areas and carried on elementary analysis, industrial analysis, and ashcontent analysis. Through the experiments, definite middlings, and gangue, the phase analysis of sulfur was carried on, by which a good understanding of sulfur characters in raw coal was achieved.

  19. Soil erosion evolution trends of Guangxi and analysis of causes%广西水土流失演变趋势及其原因分析

    Institute of Scientific and Technical Information of China (English)

    梁刚毅

    2014-01-01

    根据广西水土流失遥感调查和水利普查相关数据,分析了近60年来广西水土流失变化趋势及其原因。2000年前,广西水土流失面积呈波动性变化,水土流失面积为10690.50-13564 km2之间,占土地总面积的4.50%-5.71%,水土资源与生态环境表现为“一边治理,一边破坏”的现象;2000年后,水土流失面积由2000年的10690.50 km2迅速增加至目前的50536.78 km2,占土地总面积4.50%左右上升到目前21.27%。且流失强度明显增加,水土流失呈恶化趋势。%Analysis was made on the soil erosion evolution trends and causes of Guangxi during last 60 years based on the relevant data from remote sensing survey and water census. Before 2000,soil erosion had fluctuating chang-es with erosion area variable within 10690.50~13564km2,taking up 4.50%~5.71%of total land area;soil and wa-ter resources and ecological environment were protected and destroyed simultaneously. After 2000,soil erosion ar-ea increased rapidly from 10690.50km2 in 2000 to current 50536.78km2,with the percentage increased from 4.50%to 21.27%. Soil erosion is deteriorating with significantly rising erosion intensity.

  20. Cusum charts for preliminary analysis of individual observations

    NARCIS (Netherlands)

    A.J. Koning (Alex); R.J.M.M. Does (Ronald)

    1997-01-01

    textabstractA preliminary Cusum chart based on individual observations is developed from the uniformly most powerful test for the detection of linear trends. This Cusum chart is compared with several of its competitors which are based on the likelihood ratio test and on transformations of standardiz

  1. Morphometry and land cover based multi-criteria analysis for assessing the soil erosion susceptibility of the western Himalayan watershed.

    Science.gov (United States)

    Altaf, Sadaff; Meraj, Gowhar; Romshoo, Shakil Ahmad

    2014-12-01

    Complex mountainous environments such as Himalayas are highly susceptibility to natural hazards particular those that are triggered by the action of water such as floods, soil erosion, mass movements and siltation of the hydro-electric power dams. Among all the natural hazards, soil erosion is the most implicit and the devastating hazard affecting the life and property of the millions of people living in these regions. Hence to review and devise strategies to reduce the adverse impacts of soil erosion is of utmost importance to the planners of watershed management programs in these regions. This paper demonstrates the use of satellite based remote sensing data coupled with the observational field data in a multi-criteria analytical (MCA) framework to estimate the soil erosion susceptibility of the sub-watersheds of the Rembiara basin falling in the western Himalaya, using geographical information system (GIS). In this paper, watershed morphometry and land cover are used as an inputs to the MCA framework to prioritize the sub-watersheds of this basin on the basis of their different susceptibilities to soil erosion. Methodology included the derivation of a set of drainage and land cover parameters that act as the indicators of erosion susceptibility. Further the output from the MCA resulted in the categorization of the sub-watersheds into low, medium, high and very high erosion susceptibility classes. A detailed prioritization map for the susceptible sub-watersheds based on the combined role of land cover and morphometry is finally presented. Besides, maps identifying the susceptible sub-watersheds based on morphometry and land cover only are also presented. The results of this study are part of the watershed management program in the study area and are directed to instigate appropriate measures to alleviate the soil erosion in the study area.

  2. The fire effect on Cerrado: Analysis of the erosive process associated with native vegetation by the use of experimental plots

    Science.gov (United States)

    Costa, Yasmmin; Rodrigues, Sílvio

    2015-04-01

    In Brazil vast areas of vegetation are devastated each year by the use of fire that recorded more than 200,000 hotspots annually. In this context, the state of Minas Gerais appears first in the number of fires and burned areas due to its long stretch of reforested area in an environment where a prolonged dry season contributes to the occurrence and spread of fire in the Cerrado vegetation. This research consists of a comparative study through the controlled application of fire under different conditions of natural vegetation of the focusing on the change in rates of runoff, sediment production and vegetation density in order to evaluate the influence of burning related to soil erosion. The area of study is located in Uberlândia at an altitude of 850 meters above sea level and in the respective geographic coordinates 18°56'56"S and 48°12'21"W that composes the watershed of Glória stream. The climate is characterized by dry winters and rainy summer. On this area five experimental plots was established from the specific characteristic of its vegetation cover, slope and drainage, thus differentiated: well drained soil with the presence of a dense grass (plot A), well drained soil with the presence of shrub and grasses (plot B), poorly drained with a non-dense grass (plot C), well drained soil with grass (plot D), and well drained with grasses and tree cover(plot E). The plots have 1m2 that is connected with a trough collector that concentrate the water flow generated by runoff with a 30 liter gallon that was weekly measured. The data relating to runoff and sediment yield were obtained from the collection of water derived from water stored in gallons, in which first was homogenized, measured quantity and collected 1 liter of water to be filtrated in the laboratory. The analysis method of vegetation density was performed based on the methodology proposed by Pinese Junior, Cruz and Rodrigues (2008), using the software ENVI 4.3 to interpret and quantify the image

  3. Current Mooring Design in Partner WECs and Candidates for Preliminary Analysis

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    This report is the combined report of Commercial Milestone "CM1: Design and Cost of Current Mooring Solutions of Partner WECs" and Milestone "M3: Mooring Solutions for Preliminary Analysis" of the EUDP project "Mooring Solutions for Large Wave Energy Converters". The report covers a description...... of the current mooring design of the partner Wave Energy Converter (WEC) developers in the project, together with a preliminary cost estimate of the systems....

  4. Morphostructural analysis applied for susceptibility assessment of environmental degradation by linear hydraulic erosions in the countryside of São Paulo State

    Directory of Open Access Journals (Sweden)

    Márcia Sayuri Morinaga

    2015-03-01

    Full Text Available The Westside of the State of São Paulo, in Brazil, is known by its strong agricultural vocation and erosion problems. The natural conditions and the occupation dynamic were propitious to the emergence of this kind of environmental degradation in the soil, resulting in loss of usable area, siltation of water bodies, and demands on infrastructure. Linear hydraulic erosions, such as gullies, have as forming factors the climate, soil, land slope, and usage. In order to enrich the knowledge on this subject, the present work aimed at an analysis of the ductile geologic deformations, and subordinate brittle, and its relations to the accelerated linear hydraulic erosions in the region of Marília, in the State of São Paulo, through the interpretation of the elements of drainage and remote sensing images. In general, there was correspondence between the areas potentially susceptible to erosion diagnosed by morphostructural mapping and topography, with the current state of degradation that is a result from a century of exploitation of the land. The morphostructural and topographic analyses bring the understanding of subsurface water dynamics, and can be applied to territorial planning.

  5. ANALYSIS OF EROSION AND SEDIMENTATION PATTERNS USING SOFTWARE OF MIKE 21 HDFM-MT IN THE KAPUAS MURUNG RIVER MOUTH CENTRAL KALIMANTAN PROVINCE

    Directory of Open Access Journals (Sweden)

    Franto Novico

    2017-07-01

    Full Text Available The public transportation system along the Kapuas River, Central Kalimantan are highly depend on water transportation. Natural condition gives high distribution to the smoothness of the vessel traffic along the Kapuas Murung River. The local government has planned to build specific port for stock pile at the Batanjung which would face with natural phenomena of sedimentation and erosion at a river mouth. Erosion and sedimentation could be predicted not only by field observing but it is also needed hypotheses using software analysis. Hydrodynamics and transport sediment models by Mike 21 HDFM-MT software will be applied to describe the position of sedimentations and erosions at a river mouth. Model is assumed by two different river conditions, wet and dry seasons. Based on two types of conditions the model would also describe the river flow and sediment transport at spring and neap periods. Tidal fluctuations and a river current as field observation data would be verified with the result of model simulations. Based on field observation and simulation results could be known the verification of tidal has an 89.74% correlation while the river current correlation has 43.6%. Moreover, based on the simulation the sediment patterns in flood period have a larger area than ebb period. Furthermore, the erosion patterns dominantly occur during wet and dry season within ebb period. Water depths and sediment patterns should be considered by the vessels that will use the navigation channel at a river mouth.

  6. Preliminary Dynamic Siol-Structure-Interaction Analysis for the Waste Handling Building

    Energy Technology Data Exchange (ETDEWEB)

    G. Wagenblast

    2000-05-01

    The objective of this analysis package is to document a preliminary dynamic seismic evaluation of a simplified design concept of the Wade Handling Building (WHB). Preliminary seismic ground motions and soil data will be used. Loading criteria of the WHB System Design Description will be used. Detail design of structural members will not be performed.. The results of the analysis will be used to determine preliminary sizes of structural concrete and steel members and to determine whether the seismic response of the structure is within an acceptable level for future License Application design of safety related facilities. In order to complete this preliminary dynamic evaluation to meet the Site Recommendation (SR) schedule, the building configuration was ''frozen in time'' as the conceptual design existed in October 1999. Modular design features and dry or wet waste storage features were intentionally excluded from this preliminary dynamic seismic evaluation. The document was prepared in accordance with the Development Plan for the ''Preliminary/Dynamic Soil Structure Interaction Analysis for the Waste Handling Building'' (CRWMS M&O 2000b), which was completed, in accordance with AP-2.13Q, ''Technical Product Development Planning''.

  7. 保护性耕作下农田土壤风蚀量及其影响因子的研究初报%A Preliminary Study on Soil Wind Erosion and its Impact Factors with Conservation Tillage

    Institute of Scientific and Technical Information of China (English)

    李琳; 王俊英; 刘永霞; 周继红; 韩烈刚

    2009-01-01

    winter wheat increases. (2) The coverage of wheat field attain to the highest, followed by alfalfa and triticale, and rape the minimum eoverage; In four tillage fields of wheat, harrow-tillage coverage comes up to the highest 84.00%, and rotary to the lowest 55.33%; Wheat field coverage planted on September 27 was significantly higher than other sowing date, October 7 and October 12 the lowest. (3) Take the volume of soil erosion as dependent variable, and coverage, crop height and soil bulk density as independent variables for multiple regression analysis, then set up multiple regression equation: Y=173.186-0.449X1-0.485X2-72.699X2.

  8. Thermal Hydraulic Analysis of K-DEMO Single Blanket Module for Preliminary Accident Analysis using MELCOR

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Sung Bo; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of)

    2016-05-15

    To develop the Korean fusion commercial reactor, preliminary design concept for K-DEMO (Korean fusion demonstration reactor) has been announced by NFRI (National Fusion Research Institute). This pre-conceptual study of K-DEMO has been introduced to identify technical details of a fusion power plant for the future commercialization of fusion reactor in Korea. Before this consideration, to build the K-DEMO, accident analysis is essential. Since the Fukushima accident, which is severe accident from unexpected disaster, safety analysis of nuclear power plant has become important. The safety analysis of both fission and fusion reactors is deemed crucial in demonstrating the low radiological effect of these reactors on the environment, during severe accidents. A risk analysis of K-DEMO should be performed, as a prerequisite for the construction of a fusion reactor. In this research, thermal-hydraulic analysis of single blanket module of K-DEMO is conducted for preliminary accident analysis for K-DEMO. Further study about effect of flow distributer is conducted. The normal K-DEMO operation condition is applied to the boundary condition and simulated to verify the material temperature limit using MELCOR. MELCOR is fully integrated, relatively fast-running code developed by Sandia National Laboratories. MELCOR had been used for Light Water Reactors and fusion reactor version of MELCOR was developed for ITER accident analysis. This study shows the result of thermal-hydraulic simulation of single blanket module with MELCOR which is severe accident code for nuclear fusion safety analysis. The difference of mass flow rate for each coolant channel with or without flow distributer is presented. With flow distributer, advantage of broadening temperature gradient in the K-DEMO blanket module and increase mass flow toward first wall is obtained. This can enhance the safety of K-DEMO blanket module. Most 13 .deg. C temperature difference in blanket module is obtained.

  9. Final Report For The Erosion And Corrosion Analysis Of Waste Transfer Primary Pipeline Sections From 241-SY Tank Farm

    Energy Technology Data Exchange (ETDEWEB)

    Page, J. S.; Wyrwas, R. B.; Cooke, G. A.

    2012-10-04

    Three sections of primary transfer pipeline removed from the 241-SY Tank Farm in Hanford's 200 West area, labeled as SN-285, SN-286, and SN-278, were analyzed for the presence and amount of corrosion and erosion on the inside surface of the transfer pipe. All three sections of pipe, ranging in length between 6 and 8 in., were received at the 222-S Laboratory still in the pipe-in-pipe assembly. The annular spaces were filled with urethane foam injected into the pipes for as low as reasonably achievable (ALARA) purposes. The 3-in. primary transfer pipes were first separated from the outer encasement, 6-in. pipes. The pipes were cut into small sections, or coupons, based upon the results of a non-destructive pipe wall thickness measurement which used an ultrasonic transducer. Following removal of the foam, the coupons were subjected to a series of analytical methods utilizing both optical microscopy and scanning electron microscopy to obtain erosion and corrosion information. The ultrasonic transducer analysis of the SN-285 primary pipe did not show any thinned locations in the pipe wall which were outside the expected range for the 3-in. schedule 40 pipe of 216 mils. A coupon was cut from the thinnest area on the pipe, and analysis of the inside surface, which was in contact with the tank waste, revealed a continuous layer of corrosion ~ 100 11m (4 mils) thick under a semi-continuous layer of tank waste residue ~ 20 11m (1 mil) thick. This residue layer was composed of an amorphous phase rich in chromium, magnesium, calcium, and chlorine. Small pits were detected throughout the inside pipe surface with depths up to ~ 50 11m (2 mils). Similarly, the SN-286 primary pipe did not show, by the ultrasonic transducer measurements, any thinned locations in the pipe wall which were outside the expected range for this pipe. Analysis of the coupon cut from the pipe section showed the presence of a tank waste layer containing sodium aluminate and phases rich in iron, calcium

  10. Soil erosion and sediment fluxes analysis: a watershed study of the Ni Reservoir, Spotsylvania County, VA, USA.

    Science.gov (United States)

    Pope, Ian C; Odhiambo, Ben K

    2014-03-01

    Anthropogenic forces that alter the physical landscape are known to cause significant soil erosion, which has negative impact on surface water bodies, such as rivers, lakes/reservoirs, and coastal zones, and thus sediment control has become one of the central aspects of catchment management planning. The revised universal soil loss equation empirical model, erosion pins, and isotopic sediment core analyses were used to evaluate watershed erosion, stream bank erosion, and reservoir sediment accumulation rates for Ni Reservoir, in central Virginia. Land-use and land cover seems to be dominant control in watershed soil erosion, with barren land and human-disturbed areas contributing the most sediment, and forest and herbaceous areas contributing the least. Results show a 7 % increase in human development from 2001 (14 %) to 2009 (21.6 %), corresponding to an increase in soil loss of 0.82 Mg ha(-1) year(-1) in the same time period. (210)Pb-based sediment accumulation rates at three locations in Ni Reservoir were 1.020, 0.364, and 0.543 g cm(-2) year(-1) respectively, indicating that sediment accumulation and distribution in the reservoir is influenced by reservoir configuration and significant contributions from bedload. All three locations indicate an increase in modern sediment accumulation rates. Erosion pin results show variability in stream bank erosion with values ranging from 4.7 to 11.3 cm year(-1). These results indicate that urban growth and the decline in vegetative cover has increased sediment fluxes from the watershed and poses a significant threat to the long-term sustainability of the Ni Reservoir as urbanization continues to increase.

  11. In Situ analysis of CO2 laser irradiation on controlling progression of erosive lesions on dental enamel.

    Science.gov (United States)

    Lepri, Taísa Penazzo; Scatolin, Renata Siqueira; Colucci, Vivian; De Alexandria, Adílis Kalina; Maia, Lucianne Cople; Turssi, Cecília Pedroso; Corona, Silmara Aparecida Milori

    2014-08-01

    The present study aimed to evaluate in situ the effect of CO2 laser irradiation to control the progression of enamel erosive lesions. Fifty-six slabs of bovine incisors enamel (5 × 3 × 2.5 mm(3) ) were divided in four distinct areas: (1) sound (reference area), (2) initial erosion, (3) treatment (irradiated or nonirradiated with CO2 laser), (4) final erosion (after in situ phase). The initial erosive challenge was performed with 1% citric acid (pH = 2.3), for 5 min, 2×/day, for 2 days. The slabs were divided in two groups according to surface treatment: irradiated with CO2 laser (λ = 10.6 µm; 0.5 W) and nonirradiate. After a 2-day lead-in period, 14 volunteers wore an intraoral palatal appliance containing two slabs (irradiated and nonirradiated), in two intraoral phases of 5 days each. Following a cross-over design during the first intraoral phase, half of the volunteers immersed the appliance in 100 mL of citric acid for 5 min, 3×/day, while other half of the volunteers used deionized water (control). The volunteers were crossed over in the second phase. Enamel wear was determined by an optical 3D profilometer. Three-way ANOVA for repeated measures revealed that there was no significant interaction between erosive challenge and CO2 laser irradiation (P = 0.419). Erosive challenge significantly increased enamel wear (P = 0.001), regardless whether or not CO2 laser irradiation was performed. There was no difference in enamel wear between specimens CO2 -laser irradiated and non-irradiated (P = 0.513). Under intraoral conditions, CO2 laser irradiation did not control the progression of erosive lesions in enamel caused by citric acid. © 2014 Wiley Periodicals, Inc.

  12. Cusum charts for preliminary analysis of individual observations

    OpenAIRE

    1997-01-01

    textabstractA preliminary Cusum chart based on individual observations is developed from the uniformly most powerful test for the detection of linear trends. This Cusum chart is compared with several of its competitors which are based on the likelihood ratio test and on transformations of standardized recursive residuals on which for instance the Q-chart methodology is based. It turns out that the new proposed Cusum chart is not only superior in the detection of linear trend out-of-control co...

  13. Grid-connected ICES preliminary feasibility analysis and evaluation. Final report. Volume I. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    1977-06-30

    A group of hospitals, clinics, research facilities, and medical education facilities, known as the HEAL Complex, was chosen as the site (in New Orleans) for the demonstration of a Grid-Connected Integrated Community Energy System (ICES). The contract work included a preliminary energy supply/demand assessment of the Demonstration Community, a preliminary feasibility analysis and conceptual design of a candidate Demonstration System, preliminary assessment of institutional factors, preparation of a detailed work management plan for subsequent phases of the demonstration program, firming-up of commitments from participating parties, and reporting thereon. This Phase I study has indicated that a central ICES plant producing steam, chilled water, and by-product electricity to serve the HEAL Complex is technically and economically feasible to the extent that Phase II, Detailed Feasibility and Preliminary Design, should be implemented. (MCW)

  14. Multivariate Analysis of impacting cervical erosion in married women%宫颈糜烂发病的多因素分析

    Institute of Scientific and Technical Information of China (English)

    高蓉; 杨沛; 曾德琼; 张文琼; 周红英

    2012-01-01

    目的 探讨影响宫颈糜烂的相关高危因素,为预防提供依据.方法 应用统计学软件SPSS18.0对在妇科检查的439名已婚女性的结果进行单因素分析和非条件Logistic回归分析.结果 宫颈糜烂的患病率为34.40%,单因素分析显示女性年龄、职业、学历、产次、流产次数、丈夫学历、丈夫职业、个人卫生状况和冲洗阴道密切相关(P<0.05),Logistic回归显示女性年龄、学历、产次、流产次数以及个人卫生状况、丈夫职业、是宫颈糜烂的独立危险因素(P<0.05).结论 宫颈糜烂与多种因素有关,应针对上述危险因素采用相应预防对策.%Objective To explore the risk factors impacting cervical erosion in married women. Methods Single factor analysis and multivariate logistic regression analysis were performed to screen the risk factors in women diagnosed with cervical erosion. Results The prevalence of cervical erosion was 34. 4% in 537 married women. Single factor analysis showed such risk factors related to cervical erosion, such as patients' age. Occupation. Educational background, labors, abortions, husband's occupation, husband's educational background, personal health habits and vaginal douching (P<0. 05). The logistic regression screened out such factors including patients' age, educational background, husband' s occupation, labors, abortion and personal health habits (P<0. 05). Conclusion Cervical erosion may be related to many factors, and corresponding preventive measures may decrease the occurrence of cervical erosion.

  15. Turbine Fuels from Tar Sands Bitumen and Heavy Oil. Phase I. Preliminary Process Analysis.

    Science.gov (United States)

    1985-04-09

    Process Analysis A. F. Talbot. V. Elanchenny, L. H. Finkel, A. Macris and 3. P. Schwedock Sun Tech, Inc., A Subsidiary of Sun Co. P. 0. Box 1135 Marcus Hook...investigation be carried out in three discrete phases, as described below: Phase I - Preliminary process analysis includes an eval- uation of the potential of

  16. A Preliminary Study on Gender Differences in Studying Systems Analysis and Design

    Science.gov (United States)

    Lee, Fion S. L.; Wong, Kelvin C. K.

    2017-01-01

    Systems analysis and design is a crucial task in system development and is included in a typical information systems programme as a core course. This paper presented a preliminary study on gender differences in studying a systems analysis and design course of an undergraduate programme. Results indicated that male students outperformed female…

  17. Simwe model application on susceptibility analysis to linear erosion: a case study in Alto Douro wine region.

    Science.gov (United States)

    Fernandes, Joana; Bateira, Carlos; Soares, Laura; Faria, Ana; Moura, Rui; Gonçalves, José

    2016-04-01

    The wine production in Alto Douro Wine Region - one of the world's oldest regulated and demarcated wine region - is based on a slope system organized in agricultural terraces once supported exclusively by dry stone walls. It has been undergoing the necessary changes for the introduction of technological innovations partially associated to the mechanization of vineyards work. In this sense, different forms of terrain framing have been implemented, namely the substitution of stone walls by earth embankments. This evolution raises a group of problems related to the hydric soil erosion and landscape preservation, since Alto Douro Wine Region is classified as UNESCO World Heritage Site since 2001. The study area is mostly occupied by vineyards planted in the agriculture terraces without continuous vegetation, the flow proceeds superficially influenced by the weak infiltration capacity and hydraulic conductivity. So, because of this conditioning factor the erosive features present non-significant depth, and the length thereof is limited essentially by the slope of the land, where was registered 64 gullies and 78 rills This paper focuses on the evaluation of susceptibility to linear erosion, through the application of SIMWE (SIMulated Water Erosion), (Mitas and Mitasova, 1998), using a digital elevation model, with pixel of one square meter of spatial resolution, created through detail aerial photographs, (side pixel of 50 cm), submitted to automatic stereo-correlation procedures in Agisoft PhotoScan software. The results provided by the model are compared with hydrological characteristics of the soil, (infiltration capacity, and hydraulic conductivity), soil texture, and soil structure parameters (identified by electrical resistivity measurement) where obtained from field monitoring. This approach demonstrates an association between the spatial distribution of erosive features with high values of soil saturation, and reduced water discharge (10-110 cm3/s), that are

  18. Separation of dry and wet periods from regular weather station data for the analysis of wind erosion risk

    DEFF Research Database (Denmark)

    Naeini, Mohammadali Saremi; Fister, Wolfgang; Heckrath, Goswin Johann

    ), climate (e.g. air temperature, solar radiation, evaporation) and soil (e.g. infiltration rate, adhesion). The purpose of this study is to overcome the lack of soil moisture data for wind erosion risk assessment by developing a method to estimate the soil wetness based on easy available weather data......, such as daily precipitation, hourly/sub hourly ambient air temperature and hourly/sub hourly relative humidity. This new method was used to identify periods of wet and dry soil moisture conditions of a time series from 20 weather stations in Denmark. The length of the time series varied between 8 to 37 years...... that using wind data without the influence of soil moisture most likely lead to an overestimation of the wind erosion risk. It is, therefore, strongly recommended for wind erosion risk assessments to associate more importance to winds that occur during dry times of the year, by including soil moisture...

  19. GIS and MCDM analysis to evaluate and zoning of soil erosion in Junaghan drainage sub-basin in Karun , SW-Iran

    Science.gov (United States)

    Rezaei, Khalil; Yavari, Shahla; Khodabakhsh, Saeid; Mohseni, Hasan; Bozorgzadeh, Eisa

    2010-05-01

    Problems involving the processing of spatial data such as soil erosion are multi-facetted challenges. Recently, absolute determination of sediment production with using quality and quantity data of drainage basins is one of the most important factors in soil protection management. In this research, we use MPSIAC method for calculating of annually sediment production and then we compare results with other methods. Results showed 21.93% difference with field observations. As there are many agents affecting on erosion and they depend on geographical location, soil, topography, climate, land use, geology and hydrology of selected area, solutions for these problems involve highly complex spatial data analysis processes and frequently require advanced means to address physical suitability conditions, while considering the multiple ecological and geological variables. Geographic Information Systems (GIS) and Multi-Criteria Decision-Making techniques (MCDM) are two common tools employed to solve these problems. However, each suffers from serious shortcomings. GIS, which deals mainly with physical suitability analysis, has very limited capability of incorporating the decision maker's preferences into the problem solving process. MCDM, which deals mainly with analyzing decision problems and evaluating the alternatives based on a decision maker's values and preferences, lacks the capability of handling spatial data (e. g., buffering and overlay) that are crucial to spatial analysis. The need for combining the strengths of these two techniques has prompted researchers to seek integration of GIS and MCDM. Also, in this research, MCDM methods have been integrated with a GIS to provide a map for soil erosion based upon a variety of different choice criteria (agent) and on the importance (weight) a decision maker might attach to these. This integration could benefit environmental, soil and water planners and decision makers. Key words: soil erosion, MPSIAC, GIS, MCDM.

  20. Erosion of wind turbine blade coatings - Design and analysis of jet-based laboratory equipment for performance evaluation

    DEFF Research Database (Denmark)

    Zhang, Shizhong; Dam-Johansen, Kim; Nørkjær, Sten

    2015-01-01

    of the blades in such equipment. To reduce expensive blade maintenance repairs and to avoid out-of-service periods, energy-absorbing blade coatings are required to protect rotor blades from rain erosion. In this work we describe the design, construction and evaluation of a laboratory setup for fast screening...... of up to 22 coating samples that is based on water jet slugs. Our objective is to study the effect of the parameters involved in the rain erosion process and to correlate our experimental results with data obtained with the complex and expensive whirling arm rig, which has become the industry standard...

  1. Validating and Improving Interrill Erosion Equations

    Science.gov (United States)

    Zhang, Feng-Bao; Wang, Zhan-Li; Yang, Ming-Yi

    2014-01-01

    Existing interrill erosion equations based on mini-plot experiments have largely ignored the effects of slope length and plot size on interrill erosion rate. This paper describes a series of simulated rainfall experiments which were conducted according to a randomized factorial design for five slope lengths (0.4, 0.8, 1.2, 1.6, and 2 m) at a width of 0.4 m, five slope gradients (17%, 27%, 36%, 47%, and 58%), and five rainfall intensities (48, 62.4, 102, 149, and 170 mm h−1) to perform a systematic validation of existing interrill erosion equations based on mini-plots. The results indicated that the existing interrill erosion equations do not adequately describe the relationships between interrill erosion rate and its influencing factors with increasing slope length and rainfall intensity. Univariate analysis of variance showed that runoff rate, rainfall intensity, slope gradient, and slope length had significant effects on interrill erosion rate and that their interactions were significant at p = 0.01. An improved interrill erosion equation was constructed by analyzing the relationships of sediment concentration with rainfall intensity, slope length, and slope gradient. In the improved interrill erosion equation, the runoff rate and slope factor are the same as in the interrill erosion equation in the Water Erosion Prediction Project (WEPP), with the weight of rainfall intensity adjusted by an exponent of 0.22 and a slope length term added with an exponent of −0.25. Using experimental data from WEPP cropland soil field interrill erodibility experiments, it has been shown that the improved interrill erosion equation describes the relationship between interrill erosion rate and runoff rate, rainfall intensity, slope gradient, and slope length reasonably well and better than existing interrill erosion equations. PMID:24516624

  2. Erosion behavior and mechanism of boronised steels

    Institute of Scientific and Technical Information of China (English)

    刘立; 凌国平; 刘涛; 郦剑

    2002-01-01

    Boronising of steels is a hardening process to get high surface hardness. The erosion resistance of boronised steels was researched with the use of four kinds of erodent, i.e. glass, alumina, quartz and silicon carbide. The erosion rate increases rapidly with erodent hardness and severe erosion occurs with high impacting angle range of hard particles. SEM analysis indicated that chipping is caused by repetitive impacting of glass and quartz, whereas by alumina and silicon carbide impacting, chipping, and that plastic flow take place simultaneously and the erosion rate reaches the peak value when the impacting angle is above 60°.

  3. Erosion behavior and mechanism of boronised steels

    Institute of Scientific and Technical Information of China (English)

    刘立; 凌国平; 刘涛; 郦剑

    2002-01-01

    Boronising of steels is a hardening process to get high surfaoe hardness. The erosion resis-tance of boronised steels was researched with the use of four kinds of erodent, i.e. glass, alumina,quartz and silicon carbide. The erosion rate increases rapidly with erodent hardness and severe erosion occurs with high impacting angle range of hard particles. SEM analysis indicated that chipping is caused by repetitive impacting of glass and quartz, whereas b.y alumina and silicon carbide impacting, chipping,and that plastic flow .take place simultaneously and the erosion rate reaches the peak value when the impacting angle is above 60°.

  4. INFLUENCES OF SLOPE GRADIENT ON SOIL EROSION

    Institute of Scientific and Technical Information of China (English)

    刘青泉; 陈力; 李家春

    2001-01-01

    The main factors influencing soil erosion include the net rain excess, the water depth, the velocity, the shear stress of overland flows , and the erosion-resisting capacity of soil. The laws of these factors varying with the slope gradient were investigated by using the kinematic wave theory. Furthermore, the critical slope gradient of erosion was driven. The analysis shows that the critical slope gradient of soil erosion is dependent on grain size , soil bulk density , surface roughness, runoff length, net rain excess, and the friction coefficient of soil, etc. The critical slope gradient has been estimated theoretically with its range between 41. 5 °~ 50°.

  5. Emergency wind erosion control

    Science.gov (United States)

    February through May is the critical time for wind erosion in Kansas, but wind erosion can happen any time when high winds occur on smooth, wide fields with low vegetation and poor soil structure. The most effective wind erosion control is to ensure a protective cover of residue or growing crop thro...

  6. Erosion and Errors

    NARCIS (Netherlands)

    Huisman, H.; Heeres, Glenn; Os, van Bertil; Derickx, Willem; Schoorl, J.M.

    2016-01-01

    Slope soil erosion is one of the main threats to archaeological sites. Several methods were applied to establish the erosion rates at archaeological sites. Digital elevation models (DEMs) from three different dates were used. We compared the elevations from these three models to estimate erosion. We

  7. Analysis of a tungsten sputtering experiment in DIII-D and code/data validation of high redeposition/reduced erosion

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, J.N., E-mail: brooksjn@purdue.edu [Purdue University, West Lafayette, IN (United States); Elder, J.D. [University of Toronto Institute for Aerospace Studies, Toronto (Canada); McLean, A.G. [Lawrence Livermore National Laboratory, Livermore, CA (United States); Rudakov, D.L. [University of California San Diego, San Diego, CA (United States); Stangeby, P.C. [University of Toronto Institute for Aerospace Studies, Toronto (Canada); Wampler, W.R. [Sandia National Laboratories, Albuquerque, NM (United States)

    2015-05-15

    We analyze a DIII-D tokamak experiment where two tungsten spots on the removable DiMES divertor probe were exposed to 12 s of attached plasma conditions, with moderate strike point temperature and density (∼20 eV, ∼4.5 × 10{sup 19} m{sup −3}), and 3% carbon impurity content. Both very small (1 mm diameter) and small (1 cm diameter) deposited samples were used for assessing gross and net tungsten sputtering erosion. The analysis uses a 3-D erosion/redeposition code package (REDEP/WBC), with input from a diagnostic-calibrated near-surface plasma code (OEDGE), and with focus on charge state resolved impinging carbon ion flux and energy. The tungsten surfaces are primarily sputtered by the carbon, in charge states +1 to +4. We predict high redeposition (∼75%) of sputtered tungsten on the 1 cm spot—with consequent reduced net erosion—and this agrees well with post-exposure DiMES probe RBS analysis data. This study and recent related work is encouraging for erosion lifetime and non-contamination performance of tokamak reactor high-Z plasma facing components.

  8. Relationships Between GIS-Based Erosion Indices and Relief Production in the Karakoram Himalaya

    Science.gov (United States)

    Bishop, M. P.; Shroder, J. F.; Bush, A. B.; Copland, L.; Owen, L. A.

    2003-12-01

    Mountain topography is the result of highly scale-dependent interactions involving climatic, tectonic, and surface processes. Alpine glaciers are known to be effective erosional agents that alter landscape relief-structure differently with altitude, although considerable uncertainty and debate exists concerning their effectiveness relative to fluvial activity. Furthermore, from a geodynamic systems perspective, the role of surface processes and relief production, and the spatio-temporal relationships between erosion and rock uplift are enigmatic. The Karakoram Himalaya represents an excellent location to study such relationships, given the extreme relief and reported values of sediment flux and exhumation rates. Consequently, we utilized GIS-based terrain modeling, global climate model simulations, geochronology, and satellite remote sensing to depict areas of rapid erosion in relation to mountain peaks and zones of rapid uplift, and assess the influence of alpine glaciation and other surface processes on landscape relief-structure. Three-dimensional, scale-dependent analysis and modeling of GTOPO30 data reveals that the maximum Airy isostatic response to landscape dissection ranges from ˜ 2 - 3 km for the highest peaks. GIS-based erosion indices depict high-erosion patterns that are spatially coincident with known and suspected zones of rapid uplift and erosion, such as Nanga Parbat, K2 and the Hunza region. The spatial variations depict differences in the coupling of glacier and fluvial erosion, although high-erosion areas exhibit a significant glacier erosion component. Topographic analysis reveals a non-linear relationship between slope angles and altitude, and high-resolution satellite imagery provides evidence of glacier erosion surfaces at high altitude. Although these surfaces have not yet been dated in the K2 region, geochronologic evidence from similar terraces in Hunza support an age of > 100 K BP. If we assume this to be the case, our preliminary

  9. Watershed Analysis for Runoff and Erosion Potential on Santa Cruz Watershed: Impact of Climate and Land Cover Changes

    Science.gov (United States)

    Many empirical studies have established the significant relationship between climate and runoff: climate change may potentially increase or decrease the surface runoff. Increased surface runoff can also increase the risk of soil erosion. Land cover change can alter rainfall-runof...

  10. Soil erosion in the archaeological area of Aksum, Ethiopia: a multi-site, spatio-temporal analysis

    Science.gov (United States)

    Ciampalini, Rossano; Sernicola, Luisa; Billi, Paolo; Ferrari, Giovanni; Borselli, Lorenzo; Follain, Stéphane

    2014-05-01

    The aim of this research is to synthesize previous works on soil erosion evaluation in response to soil conservation strategies practiced in the area of Aksum (Tigray, northern Ethiopia) throughout the last three millennia. This location presents favourable conditions for the implementation of a long-term approach for assessing soil conservation techniques that have been used for centuries (i.e., since the Aksumite kingdom, 2400 y BP to 1200 y BP). These techniques have been maintained until present and parts of the terraced systems of the area are still in use. The study is based on an archaeologically based reconstruction of the ancient settlement pattern of the whole area which provided significant information on the changes occurred in land occupation, exploitation and management throughout the Aksumite civilization. In such context, the rate of soil erosion was evaluated on the basis of the analyses of the presently exposed, deep scratches (plough marks) left on the rocks in the soil by the maresha, the ard-plough pulled by oxen used in agricultural practices of the area; further considerations have been done by the means of associated patinas, varnishes and weathering rinds on the boulders exposed by soil loss. Analyses for the assessment of soil erosion have been focused on three terraced areas where evidence of occupation and ploughing could be traced back since at least the beginning of the Aksumite kingdom, and where the plough marks are still well preserved. The plough marks method indicates average rates of soil erosion of 3.1, 2.8 and 1.2 tha-1 y-1, respectively. Recent changes in land-management in one of the sites, shifting from soil conservation conditions under traditional agriculture (long-term observations) to accelerated erosion after abandonment (short-term observations) occurred during the land use reorganisation in the 70s, produced a high soil erosion of about 62.6 t ha-1 y-1. These data lead up to a new survey phase able to provide a

  11. Thick Concrete Specimen Construction, Testing, and Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, Dwight A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hoegh, Kyle [Univ. of Minnesota, Minneapolis, MN (United States); Khazanovich, Lev [Univ. of Minnesota, Minneapolis, MN (United States)

    2015-03-01

    The purpose of the U.S. Department of Energy Office of Nuclear Energy’s Light Water Reactor Sustainability (LWRS) Program is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the operating lifetimes of nuclear power plants (NPPs) beyond 60 years. Since many important safety structures in an NPP are constructed of concrete, inspection techniques must be developed and tested to evaluate the internal condition. In-service containment structures generally do not allow for the destructive measures necessary to validate the accuracy of these inspection techniques. This creates a need for comparative testing of the various nondestructive evaluation (NDE) measurement techniques on concrete specimens with known material properties, voids, internal microstructure flaws, and reinforcement locations. A preliminary report detailed some of the challenges associated with thick reinforced concrete sections and prioritized conceptual designs of specimens that could be fabricated to represent NPP concrete structures for using in NDE evaluation comparisons. This led to the construction of the concrete specimen presented in this report, which has sufficient reinforcement density and cross-sectional size to represent an NPP containment wall. Details on how a suitably thick concrete specimen was constructed are presented, including the construction materials, final nominal design schematic, as well as formwork and rigging required to safely meet the desired dimensions of the concrete structure. The report also details the type and methods of forming the concrete specimen as well as information on how the rebar and simulated defects were embedded. Details on how the resulting specimen was transported, safely anchored, and marked to allow access for systematic comparative NDE testing of defects in a representative NPP containment wall concrete specimen are also given. Data collection using the MIRA Ultrasonic NDE equipment and

  12. Dental erosion, summary.

    Science.gov (United States)

    ten Cate, J M; Imfeld, T

    1996-04-01

    Although reports on dental erosion have always appeared in the dental literature, there is currently a growing interest among researchers and clinicians. Potential risk factors for dental erosion are changed lifestyle and eating patterns, with increased consumption of acidic foods and beverages. Various gastrointestinal and eating disorders expose the dentition to frequent contacts with very acidic gastric content, which may lead to erosion. Whether these factors indeed lead, on a population scale, to a higher prevalence and incidence of erosion is yet to be established. This article summarizes the different aspects of the prevalence, pathology, etiology, assessment, prevention and treatment of dental erosion, and concludes with recommendations for future research.

  13. Preliminary Analysis of Species Partitioning in the DWPF Melter

    Energy Technology Data Exchange (ETDEWEB)

    Choi, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kesterson, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Johnson, F. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-07-15

    The work described in this report is preliminary in nature since its goal was to demonstrate the feasibility of estimating the off-gas entrainment rates from the Defense Waste Processing Facility (DWPF) melter based on a simple mass balance using measured feed and glass pour stream compositions and timeaveraged melter operating data over the duration of one canister-filling cycle. The only case considered in this study involved the SB6 pour stream sample taken while Canister #3472 was being filled over a 20-hour period on 12/20/2010, approximately three months after the bubblers were installed. The analytical results for that pour stream sample provided the necessary glass composition data for the mass balance calculations. To estimate the “matching” feed composition, which is not necessarily the same as that of the Melter Feed Tank (MFT) batch being fed at the time of pour stream sampling, a mixing model was developed involving three preceding MFT batches as well as the one being fed at that time based on the assumption of perfect mixing in the glass pool but with an induction period to account for the process delays involved in the calcination/fusion step in the cold cap and the melter turnover.

  14. Preliminary Coupling of MATRA Code for Multi-physics Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seongjin; Choi, Jinyoung; Yang, Yongsik; Kwon, Hyouk; Hwang, Daehyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The boundary conditions such as the inlet temperature, mass flux, averaged heat flux, power distributions of the rods, and core geometry is given by constant values or functions of time. These conditions are separately calculated and provided by other codes, such as a neutronics or a system codes, into the MATRA code. In addition, the coupling of several codes in the different physics field is focused and embodied. In this study, multiphysics coupling methods were developed for a subchannel code (MATRA) with neutronics codes (MASTER, DeCART) and a fuel performance code (FRAPCON-3). Preliminary evaluation results for representative sample cases are presented. The MASTER and DeCART codes provide the power distribution of the rods in the core to the MATRA code. In case of the FRAPCON-3 code, the variation of the rod diameter induced by the thermal expansion is yielded and provided. The MATRA code transfers the thermal-hydraulic conditions that each code needs. Moreover, the coupling method with each code is described.

  15. Laboratory Investigations on Estuary Salinity Mixing: Preliminary Analysis

    Directory of Open Access Journals (Sweden)

    F. H. Nuryazmeen

    2014-05-01

    Full Text Available Estuaries are bodies of water along the coasts that are formed when fresh water from rivers flows into and mixes with salt water from the ocean. The estuaries serve as a habitat to some aquatic lives, including mangroves. Human-induced activities such as dredging of shipping lanes along the bottom estuarine, the disposal of industrial wastes into the water system and shoreline development influence estuarine dynamics which include mixing process. These activities might contribute to salinity changes and further adversely affect the estuarine ecosystem. In order to study at the characteristics of the mixing between salt water (estuary and freshwater (river, a preliminary investigation had been done in the laboratory. Fresh water was released from one end of the flume and overflowing at weir at the other end. Meanwhile, salt water was represented by the red dye tracer released through a weir and intruded upstream as a gravity current. The isohalines are plotted to see the salinity patterns. Besides, to examine the spatial and temporal salinity profiles along the laboratory investigations, the plotted graphs have been made. The results show that the changes in salinity level along the flume due to mixing between fresh water and salt water. This showed typical salt-wedge estuary characteristics.

  16. Multiperspective analysis of erosion tolerance Análise multiperspectiva da tolerância à erosão

    Directory of Open Access Journals (Sweden)

    Gerd Sparovek

    2003-01-01

    Full Text Available Erosion tolerance is the most multidisciplinary field of soil erosion research. Scientists have shown lack in ability to adequately analyze the huge list of variables that influence soil loss tolerance definitions. For these the perspectives of erosion made by farmers, environmentalists, society and politicians have to be considered simultaneously. Partial and biased definitions of erosion tolerance may explain not only the polemic nature of the currently suggested values but also, in part, the nonadoption of the desired levels of erosion control. To move towards a solution, considerable changes would have to occur on how this topic is investigated, especially among scientists, who would have to change methods and strategies and extend the perspective of research out of the boundaries of the physical processes and the frontiers of the academy. A more effective integration and communication with the society and farmers, to learn about their perspective of erosion and a multidisciplinary approach, integrating soil, social, economic and environmental sciences are essential for improved erosion tolerance definitions. In the opinion of the authors, soil erosion research is not moving in this direction and a better understanding of erosion tolerance is not to be expected in the near future.A tolerância de perda de terra é o campo mais multidisciplinar das pesquisas em erosão do solo. Os cientistas têm demonstrado falta de habilidade para analisar adequadamente a enorme lista de variáveis que influenciam a definição da tolerância de perda de solo. Para isto, a ótica dos agricultores, ambientalistas, sociedade e forças políticas têm que ser considerada simultaneamente. Definições de tolerância parciais ou tendenciosas podem explicar não apenas o caráter polêmico dos valores sugeridos atualmente como também, em parte, a não adoção dos níveis de controle de erosão desejados. Consideráveis mudanças na forma de investigação deste

  17. A Quantitative Study of Gully Erosion Based on Object-Oriented Analysis Techniques: A Case Study in Beiyanzikou Catchment of Qixia, Shandong, China

    Directory of Open Access Journals (Sweden)

    Tao Wang

    2014-01-01

    Full Text Available This paper took a subregion in a small watershed gully system at Beiyanzikou catchment of Qixia, China, as a study and, using object-orientated image analysis (OBIA, extracted shoulder line of gullies from high spatial resolution digital orthophoto map (DOM aerial photographs. Next, it proposed an accuracy assessment method based on the adjacent distance between the boundary classified by remote sensing and points measured by RTK-GPS along the shoulder line of gullies. Finally, the original surface was fitted using linear regression in accordance with the elevation of two extracted edges of experimental gullies, named Gully 1 and Gully 2, and the erosion volume was calculated. The results indicate that OBIA can effectively extract information of gullies; average range difference between points field measured along the edge of gullies and classified boundary is 0.3166 m, with variance of 0.2116 m. The erosion area and volume of two gullies are 2141.6250 m2, 5074.1790 m3 and 1316.1250 m2, 1591.5784 m3, respectively. The results of the study provide a new method for the quantitative study of small gully erosion.

  18. A quantitative study of gully erosion based on object-oriented analysis techniques: a case study in Beiyanzikou catchment of Qixia, Shandong, China.

    Science.gov (United States)

    Wang, Tao; He, Fuhong; Zhang, Anding; Gu, Lijuan; Wen, Yangmao; Jiang, Weiguo; Shao, Hongbo

    2014-01-01

    This paper took a subregion in a small watershed gully system at Beiyanzikou catchment of Qixia, China, as a study and, using object-orientated image analysis (OBIA), extracted shoulder line of gullies from high spatial resolution digital orthophoto map (DOM) aerial photographs. Next, it proposed an accuracy assessment method based on the adjacent distance between the boundary classified by remote sensing and points measured by RTK-GPS along the shoulder line of gullies. Finally, the original surface was fitted using linear regression in accordance with the elevation of two extracted edges of experimental gullies, named Gully 1 and Gully 2, and the erosion volume was calculated. The results indicate that OBIA can effectively extract information of gullies; average range difference between points field measured along the edge of gullies and classified boundary is 0.3166 m, with variance of 0.2116 m. The erosion area and volume of two gullies are 2141.6250 m(2), 5074.1790 m(3) and 1316.1250 m(2), 1591.5784 m(3), respectively. The results of the study provide a new method for the quantitative study of small gully erosion.

  19. Fukushima Daiichi unit 1 uncertainty analysis--Preliminary selection of uncertain parameters and analysis methodology

    Energy Technology Data Exchange (ETDEWEB)

    Cardoni, Jeffrey N.; Kalinich, Donald A.

    2014-02-01

    Sandia National Laboratories (SNL) plans to conduct uncertainty analyses (UA) on the Fukushima Daiichi unit (1F1) plant with the MELCOR code. The model to be used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). However, that study only examined a handful of various model inputs and boundary conditions, and the predictions yielded only fair agreement with plant data and current release estimates. The goal of this uncertainty study is to perform a focused evaluation of uncertainty in core melt progression behavior and its effect on key figures-of-merit (e.g., hydrogen production, vessel lower head failure, etc.). In preparation for the SNL Fukushima UA work, a scoping study has been completed to identify important core melt progression parameters for the uncertainty analysis. The study also lays out a preliminary UA methodology.

  20. The Influence of Localized Glacial Erosion on Exhumation Paths in Accreting Coulomb Wedges: Insights from Particle Velocimetry Analysis of Sandbox Models

    Science.gov (United States)

    Newman, P. J.; Davis, K.; Haq, S. S. B.; Ridgway, K.

    2015-12-01

    Glacial erosion can have an impact on the location and development of faults in mountain belts. The rapid removal and deposition of rock, in some cases, is thought to affect the initiation of slip on older fault structures, or cause the development of new structures within the older part of the wedge. We present cross-sectional data from both erosional and non-erosional sandbox models of Coulomb wedges in order to quantify the impact of localized erosion on the location of and slip on deformational structures, as well as the general path of material through a wedge. To do this, we employ Lagrangian particle tracking velocimetry (PTV) using the open-source Python PTV toolkit trackpy, among a suite of other data analysis tools. We are able to extract robust and reliable sets of particle trajectories from a series of images without the need for predefined markers or marker-beds, instead identifying and tracking natural variations in sand color as individual particles. By comparing the motion of particles in cross-section to the local surface topography over an entire experiment, we determine a high-resolution record of exhumation rates, in addition to simple uplift rates. These comparisons are further informed by the use of high-definition Eulerian particle image velocimetry (PIV), which provides quantitative data about the distribution of deformation and instantaneous material displacements throughout a cross-sectional view of a Coulomb wedge. This allows us to interpret these pathways in relation to the behavior of active structures and general wedge morphology. In our experiments, we observe that localized glacial erosion has an impact on material pathways, in the form of an increased rate of exhumation locally, more vertical trajectories towards surface below the zone of erosion, and reactivation of older structures to maintain force balance within the entire wedge.

  1. Preliminary Analysis of a Novel SAR Based Emergency System for Earth Orbit Satellites using Galileo

    NARCIS (Netherlands)

    Gill, E.K.A.; Helderweirt, A.

    2010-01-01

    This paper presents a preliminary analysis of a novel Search and Rescue (SAR) based emergency system for Low Earth Orbit (LEO) satellites using the Galileo Global Navigation Satellite System (GNSS). It starts with a description of the space user SAR system including a concept description, mission ar

  2. ANSI/ASHRAE/IES Standard 90.1-2013 Preliminary Determination: Quantitative Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, Mark A.; Rosenberg, Michael I.; Wang, Weimin; Zhang, Jian; Mendon, Vrushali V.; Athalye, Rahul A.; Xie, YuLong; Hart, Reid; Goel, Supriya

    2014-03-01

    This report provides a preliminary quantitative analysis to assess whether buildings constructed according to the requirements of ANSI/ASHRAE/IES Standard 90.1-2013 would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IES Standard 90.1-2010.

  3. Preliminary Analysis of the Oklahoma Wavefields Demonstration Dataset

    Science.gov (United States)

    Anderson, K. R.; Sweet, J. R.; Woodward, R.; Karplus, M. S.; DeShon, H. R.; Magnani, M. B.; Hayward, C.; Langston, C. A.

    2016-12-01

    In June 2016, a field crew of 50 students, faculty, industry personnel and IRIS staff deployed a total of 390 stations as part of a community seismic experiment above an active seismic lineament in north-central Oklahoma. The goals of the experiment were to test new instrumentation and deployment strategies that record the full wavefield, and to advance understanding of earthquake source processes and regional lithospheric structure. The crew deployed 363 3C 4.5Hz Generation 2 Fairfield Z-Land nodes along three seismic lines and in a seven-layer nested gradiometer array. The seismic lines spanned a region 13 km long by 5 km wide. The nested gradiometer was designed to measure the full seismic wavefield using standard frequency-wavenumber techniques and spatial wave gradients. A broadband, 18 station "Golay 3x6" array was deployed around the gradiometer and seismic lines with an aperture of approximately 5 km to collect waveform data from local and regional events. In addition, 9 infrasound stations were deployed in order to capture and identify acoustic events that might be recorded by the seismic arrays and to quantify the wind acoustic noise effect on co-located broadband stations. The variety of instrumentation used in this deployment was chosen to capture the full seismic wavefield generated by the local and regional seismicity beneath the array and the surrounding region. We present preliminary results from the data collected during the experiment. We analyze the level of signal coherence observed across the nested gradiometer and Golay array as well as array design fidelity. We report on data quality, including completeness and noise levels, for the various types of instrumentation. We also examine the performance of co-located surface and buried nodes to determine the benefits of each installation type. Finally, we present performance comparisons between co-located nodes and broadband stations and compare these results to prior wavefield/large-N deployments

  4. Preliminary analysis techniques for ring and stringer stiffened cylindrical shells

    Science.gov (United States)

    Graham, J.

    1993-03-01

    This report outlines methods of analysis for the buckling of thin-walled circumferentially and longitudinally stiffened cylindrical shells. Methods of analysis for the various failure modes are presented in one cohesive package. Where applicable, more than one method of analysis for a failure mode is presented along with standard practices. The results of this report are primarily intended for use in launch vehicle design in the elastic range. A Microsoft Excel worksheet with accompanying macros has been developed to automate the analysis procedures.

  5. Measurement and analysis of polarization curves of mild steel in sodium carbonate/bicarbonate solution under erosion-corrosion conditions

    Institute of Scientific and Technical Information of China (English)

    袁庆龙

    2002-01-01

    The polarization curves of mild steel in de-aerated 0.5 mol NaHCO3+0.5 mol Na2CO3 solution with and without erodent particles of 300 g/L of 100 μm alumina have been measured using a rotating cylinder electrode (RCE) apparatus over the range of rotation speeds from 0 to 4 000 r/min. The results show that the mild steel in the de-aerated slurry exhibits classical active/passive polarization behavior. The speed of cylinder rotation has a great effect in the presence of particles on the active dissolution current density. The erosion-corrosion process is severely erosion-dominated for the mild steel. However, the poor corrosion resistance of the mild steel in such turbulent slurries is also significant, especially at lower than 4 m/s.

  6. Spatial and temporal analysis of Holocene coastal development: applications to erosion assessment and cultural heritage mitigation on Svalbard

    OpenAIRE

    2013-01-01

    High geomorphic and climatic variability in Arctic coastlines makes evaluating future coastal erosion in a changing climate a challenge. Predictions must, among other things, incorporate modifications to sediment supply and accommodation space, changes in the permafrost regime, climate variability including rising air and sea temperatures, stronger winds, less sea ice, and increased precipitation. This thesis explores processes and climate variables associated with coastal development through...

  7. Analysis of methods to determine the sediment retained by check dams and to estimate erosion rates in badlands.

    Science.gov (United States)

    Ramos-Diez, Iván; Navarro-Hevia, Joaquín; San Martín Fernández, Roberto; Díaz-Gutiérrez, Virginia; Mongil-Manso, Jorge

    2016-07-01

    Check dams are useful structures at a catchment scale to determine erosion rates using the sediment retained in their wedges. Several studies employ different complex, accurate methods to estimate them. We likewise evaluate which catchment variables affect these erosion rate values. Our study aims to compare five frequently used methods (two prismatic and three topographic) to evaluate how they estimate total sediment yield (TSY) at two locations in Central Spain. For this purpose, we determine the sediment trapped in each area by 25 check dams built during the twentieth century. We also evaluate the catchment variables influencing TSY rates. Results show differences between methods in TSY determinations at the 90 % confidence level, although there are no differences between locations or the location-method iteration. We found that the natural logarithm of the drainage area was the factor that best explained TSY, presenting a negative trend (partial correlation coefficient, 0.83). Vegetation cover factor had no influence in estimating TSY for the two locations. We conclude that the determination of TSY rates depends on the chosen method and four related variables: check dam length, check dam height, wedge length and check dam drainage area. Furthermore, it is important to analyse and select the best method to estimate erosion rates based on the sediment retained by check dams depending on the characteristics of the study area (channel and sediment wedge shape), method accuracy and field effort. A more accurate estimation of erosion rates will allow researchers to determine the role of check dams in controlling sediment in each specific restoration project.

  8. Coupling Analysis of Fluid-Structure Interaction and Flow Erosion of Gas-Solid Flow in Elbow Pipe

    OpenAIRE

    Hongjun Zhu; Hongnan Zhao; Qian Pan; Xue Li

    2014-01-01

    A numerical simulation has been conducted to investigate flow erosion and pipe deformation of elbow in gas-solid two-phase flow. The motion of the continuous fluid phase is captured based on calculating three-dimensional Reynolds-averaged-Navier-Stokes (RANS) equations, while the kinematics and trajectory of the discrete particles are evaluated by discrete phase model (DPM), and a fluid-structure interaction (FSI) computational model is adopted to calculate the pipe deformation. The effects o...

  9. Preliminary Design and Analysis of ITER In-Wall Shielding

    Institute of Scientific and Technical Information of China (English)

    LIU Changle; YU Jie; WU Songtao; CAI Yingxiang; PAN Wanjiang

    2007-01-01

    ITER in-wall shielding (IIS) is situated between the doubled shells of the ITER Vacuum Vessel (IVV). Its main functions are applied in shielding neutron, gamma-ray and toroidal field ripple reduction. The structure of IIS has been modelled according to the IVV design criteria which has been updated by the ITER team (IT). Static analysis and thermal expansion analysis were performed for the structure. Thermal-hydraulic analysis verified the heat removal capability and resulting temperature, pressure, and velocity changes in the coolant flow. Consequently, our design work is possibly suitable as a reference for IT's updated or final design in its next step.

  10. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-01-18

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program (The Program). The analysis is a task by Princeton Energy Resources International, LLC, in support of the National Renewable Energy Laboratory on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE).

  11. First fungal genome sequence from Africa: A preliminary analysis

    Directory of Open Access Journals (Sweden)

    Rene Sutherland

    2012-01-01

    Full Text Available Some of the most significant breakthroughs in the biological sciences this century will emerge from the development of next generation sequencing technologies. The ease of availability of DNA sequence made possible through these new technologies has given researchers opportunities to study organisms in a manner that was not possible with Sanger sequencing. Scientists will, therefore, need to embrace genomics, as well as develop and nurture the human capacity to sequence genomes and utilise the ’tsunami‘ of data that emerge from genome sequencing. In response to these challenges, we sequenced the genome of Fusarium circinatum, a fungal pathogen of pine that causes pitch canker, a disease of great concern to the South African forestry industry. The sequencing work was conducted in South Africa, making F. circinatum the first eukaryotic organism for which the complete genome has been sequenced locally. Here we report on the process that was followed to sequence, assemble and perform a preliminary characterisation of the genome. Furthermore, details of the computer annotation and manual curation of this genome are presented. The F. circinatum genome was found to be nearly 44 million bases in size, which is similar to that of four other Fusarium genomes that have been sequenced elsewhere. The genome contains just over 15 000 open reading frames, which is less than that of the related species, Fusarium oxysporum, but more than that for Fusarium verticillioides. Amongst the various putative gene clusters identified in F. circinatum, those encoding the secondary metabolites fumosin and fusarin appeared to harbour evidence of gene translocation. It is anticipated that similar comparisons of other loci will provide insights into the genetic basis for pathogenicity of the pitch canker pathogen. Perhaps more importantly, this project has engaged a relatively large group of scientists

  12. Performance analysis tool (PATO): Development and preliminary validation

    National Research Council Canada - National Science Library

    Fernando Martins; Filipe Clemente; Frutuoso Silva

    2017-01-01

    .... The Performance Analysis Tool (PATO) software was built with the aim to quickly codify relationships between players and built the adjacency matrices that can be used to test the network measures...

  13. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    McVeigh, J.; Cohen, J.; Vorum, M.; Porro, G.; Nix, G.

    2007-03-01

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program ('the Program'). The analysis is a task by Princeton Energy Resources International, LLC (PERI), in support of the National Renewable Energy Laboratory (NREL) on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE). This requires both computational development (i.e., creating a spreadsheet-based analysis tool) and a synthesis of judgments by a panel of researchers and experts of the expected results of the Program's R&D.

  14. Integrated transcriptome and methylome analysis in youth at high risk for bipolar disorder: a preliminary analysis.

    Science.gov (United States)

    Fries, G R; Quevedo, J; Zeni, C P; Kazimi, I F; Zunta-Soares, G; Spiker, D E; Bowden, C L; Walss-Bass, C; Soares, J C

    2017-03-14

    First-degree relatives of patients with bipolar disorder (BD), particularly their offspring, have a higher risk of developing BD and other mental illnesses than the general population. However, the biological mechanisms underlying this increased risk are still unknown, particularly because most of the studies so far have been conducted in chronically ill adults and not in unaffected youth at high risk. In this preliminary study we analyzed genome-wide expression and methylation levels in peripheral blood mononuclear cells from children and adolescents from three matched groups: BD patients, unaffected offspring of bipolar parents (high risk) and controls (low risk). By integrating gene expression and DNA methylation and comparing the lists of differentially expressed genes and differentially methylated probes between groups, we were able to identify 43 risk genes that discriminate patients and high-risk youth from controls. Pathway analysis showed an enrichment of the glucocorticoid receptor (GR) pathway with the genes MED1, HSPA1L, GTF2A1 and TAF15, which might underlie the previously reported role of stress response in the risk for BD in vulnerable populations. Cell-based assays indicate a GR hyporesponsiveness in cells from adult BD patients compared to controls and suggest that these GR-related genes can be modulated by DNA methylation, which poses the theoretical possibility of manipulating their expression as a means to counteract the familial risk presented by those subjects. Although preliminary, our results suggest the utility of peripheral measures in the identification of biomarkers of risk in high-risk populations and further emphasize the potential role of stress and DNA methylation in the risk for BD in youth.

  15. Understanding the erosion of semi-arid landscapes subject to vegetation change: a combined approach using monitoring, isotope and 14C analysis

    Science.gov (United States)

    Brazier, R. E.; Turnbull, L.; Bol, R.; Dixon, L.; Wainwright, J.

    2009-04-01

    The degradation of grasslands is a common problem across semi-arid areas worldwide. Over the last 150 years much of the South-Western USA has experienced significant land degradation, with desert grasslands becoming dominated by shrubs and concurrent changes in runoff and erosion which are thought to propagate further the process of degradation. Field-based experiments were carried out to determine how runoff and erosion vary at stages over a transition from a black grama (Bouteloua eriopoda) grassland to creosotebush (Larrea tridentata) shrubland at the Sevilleta NWR LTER site in New Mexico. 14C and δ13C analyses were carried out to investigate the age and potential provenance of eroded sediment. Results show an overall increase in runoff and erosion over the transition from grassland to shrubland, associated with an increase in connectivity of bare, runoff-generating areas, although these increases do not appear to follow a linear trajectory. Erosion rates increased over the transition from grassland to shrubland, related in part to changes in runoff characteristics and the increased capacity of the runoff to detach, entrain and transport sediment. Over all plots fine material was preferentially eroded which has potential implications for nutrient cycling since nutrients tend to be associated with fine sediment. There are significant differences in the isotopic signatures of eroded sediment between the grass- and shrub-dominated plots. The positive correlation between event runoff and δ13C signatures of eroded sediment that is consistent over plots 1, 3 and 4 suggests that the δ13C signatures can be used to distinguish between changes in erosion dynamics over events of different magnitudes and over different vegetation types. 14C analysis of sediment revealed that sediment eroded from all plots is considerably younger than the surface soils over all plots, which is likely to indicate that eroded sediments tend to source form very near surface areas that are

  16. Bioelectrical impedance analysis for bovine milk: Preliminary results

    Science.gov (United States)

    Bertemes-Filho, P.; Valicheski, R.; Pereira, R. M.; Paterno, A. S.

    2010-04-01

    This work reports the investigation and analysis of bovine milk quality by using biological impedance measurements using electrical impedance spectroscopy (EIS). The samples were distinguished by a first chemical analysis using Fourier transform midinfrared spectroscopy (FTIR) and flow citometry. A set of milk samples (100ml each) obtained from 17 different cows in lactation with and without mastitis were analyzed with the proposed technique using EIS. The samples were adulterated by adding distilled water and hydrogen peroxide in a controlled manner. FTIR spectroscopy and flow cytometry were performed, and impedance measurements were made in a frequency range from 500Hz up to 1MHz with an implemented EIS system. The system's phase shift was compensated by measuring saline solutions. It was possible to show that the results obtained with the Bioelectrical Impedance Analysis (BIA) technique may detect changes in the milk caused by mastitis and the presence of water and hydrogen peroxide in the bovine milk.

  17. Erosion-corrosion; Erosionkorrosion

    Energy Technology Data Exchange (ETDEWEB)

    Aghili, B

    1999-05-01

    A literature study on erosion-corrosion of pipings in the nuclear industry was performed. Occurred incidents are reviewed, and the mechanism driving the erosion-corrosion is described. Factors that influence the effect in negative or positive direction are treated, as well as programs for control and inspection. Finally, examples of failures from databases on erosion-corrosion are given in an attachment 32 refs, 16 figs, tabs

  18. A Preliminary Analysis of a Behavioral Classrooms Needs Assessment

    Science.gov (United States)

    Leaf, Justin B.; Leaf, Ronald; McCray, Cynthia; Lamkins, Carol; Taubman, Mitchell; McEachin, John; Cihon, Joseph H.

    2016-01-01

    Today many special education classrooms implement procedures based upon the principles of Applied Behavior Analysis (ABA) to establish educationally relevant skills and decrease aberrant behaviors. However, it is difficult for school staff and consultants to evaluate the implementation of various components of ABA and general classroom set up. In…

  19. A Preliminary MANPRINT Evaluation of the All Source Analysis (ASAS)

    Science.gov (United States)

    1988-11-01

    Rear (CEWI) FSIC ............................ 2 CEWI ( TCAE ) AIM(6) ........................... 2 DTOC AIM(6...Sensors and the Ml Battalion TCAE ..... ............... . 13 2. Ratings of Understanding of Tasks Required at the Completion of Training and at the...for transmission to the sensors and jammers. CEWI Tactical Control and Analysis Element ( TCAE ) AIM(6) The AIM module consists of a VAX 750R computer

  20. User`s manual for EROSION/MOD1: A computer program for fluids-solids erosion

    Energy Technology Data Exchange (ETDEWEB)

    Lyczkowski, R.W.; Bouillard, J.X.; Folga, S.M.; Chang, S.L.

    1992-09-01

    This report describes EROSION/MOD1, a computer program that was developed as a two-dimensional analytical tool for the general analysis of erosion in fluid-solids systems and the specific analysis of erosion in bubbling fluidized-bed combustors. Contained herein are implementations of Finnie`s impaction erosion model, Neilson and Gilchrist`s combined ductile and brittle erosion model, and several forms of the monolayer energy dissipation erosion model. These models and their implementations are described briefly. The global structure of EROSION/MOD1 that contains these models is also discussed. The input data for EROSION/MOD1 are given, and a sample problem for a fluidized bed is described. The hydrodynamic input data are assumed to come from the output of FLUFIX/MOD2.

  1. 北京市平原区农田土壤蚀积特征分析%Analysis on Farmland Soil Erosion and Deposition Features in Beijing Plain

    Institute of Scientific and Technical Information of China (English)

    王仁德; 邹学勇; 赵婧妍; 张艺磊

    2011-01-01

    By bays of field observations, wind-tunnel simulation and laboratory analysis, under the common function of soil wind-erosion and atmospheric dustfall, the farmland soil erosion and sedimentary characteristics in Beijing plain and its effect on soil physical and chemical properties were studied.The results showed that soil erosion intensity in 2009 was 0.64 t/hm2 ,with particle diameter of 20~80 μm in the main;the atmospheric dustfall intensity is 1.00 t/hm2 , with particle diameter of 10~50 μm in the main.The intensity of dustfall was over that of soil erosion, so deposition happenned in farmland surface with strength of about 0.36 t/hm2 · a.Size of dustfall particles was smaller obviously than that of wind-erosion dusts, this leaded to the soil particles becoming finer and finer by long-term erosion and deposition effect.The content of heavy metal elements in dustfall was higher than that of soil and wind-erosion dusts, which leaded to the accumulation of heavy metals in soil.%采用野外观测、风洞模拟和实验室分析等手段,对北京市平原区土壤风蚀和大气降尘两种自然过程共同作用下的农田土壤蚀积状况及其对土壤理化性质的影响问题进行了研究.结果表明,2009年研究区农田土壤风蚀强度为0.64 t/hm2,风蚀物颗粒以粒径在20~80μm的尘粒为主;大气降尘强度为1.00 t/hm2,降尘颗粒以粒径在10~50μm的尘粒为主.降尘强度大于土壤风蚀强度,农田地表以沉积为主,强度约为0.36 t/hm2·a.降尘粒径比风蚀物粒径明显偏细,长期的蚀积作用导致土壤粒度组成变细.降尘中重金属元索的含量明显大于土壤和风蚀物中的含量,长期沉积作用导致土壤中重金属元素的累积.

  2. Preliminary shielding analysis for the CSNS target station monolith

    Institute of Scientific and Technical Information of China (English)

    张斌; 陈义学; 杨寿海; 吴军; 殷雯; 梁天骄; 贾学军

    2010-01-01

    The construction of the China Spallation Neutron Source (CSNS) has been initiated at Dongguan,Guangdong,China.In spallation neutron sources the target station monolith is contaminated by a large number of fast neutrons whose energies can be as large as those of the protons of the proton beam directed towards the tungsten target.A detailed radiation transport analysis of the target station monolith is important for the construction of the CSNS.The analysis is performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method.Successful elimination of the primary ray effects via the two-dimensional uncollided flux and first collision source methodology is also illustrated.The dose at the edge of the monolith is calculated.The results demonstrate that the doses received by the hall staff members are below the required standard limit.

  3. Preliminary analysis of productivity of fruiting fungi on Strzeleckie meadows

    Directory of Open Access Journals (Sweden)

    Barbara Sadowska

    2014-11-01

    Full Text Available Analysis demonstrated that the fresh ahd dry weight as well as the ash content of fungal fruit bodies collected on a forest-surrounded unmown meadow (Stellario-Deschampsietum Freitag 1957 and Caricetum elatae W.Koch 1926 were lower than the same values for a plot of exploited mown meadow and higher than on an exploited unmown meadow (Arrhenatheretum medioeuropaeum (Br.-Bl. Oberd. 1952.

  4. Preliminary analysis of knee stress in Full Extension Landing

    Directory of Open Access Journals (Sweden)

    Majid Davoodi Makinejad

    2013-09-01

    Full Text Available OBJECTIVE: This study provides an experimental and finite element analysis of knee-joint structure during extended-knee landing based on the extracted impact force, and it numerically identifies the contact pressure, stress distribution and possibility of bone-to-bone contact when a subject lands from a safe height. METHODS: The impact time and loads were measured via inverse dynamic analysis of free landing without knee flexion from three different heights (25, 50 and 75 cm, using five subjects with an average body mass index of 18.8. Three-dimensional data were developed from computed tomography scans and were reprocessed with modeling software before being imported and analyzed by finite element analysis software. The whole leg was considered to be a fixed middle-hinged structure, while impact loads were applied to the femur in an upward direction. RESULTS: Straight landing exerted an enormous amount of pressure on the knee joint as a result of the body's inability to utilize the lower extremity muscles, thereby maximizing the threat of injury when the load exceeds the height-safety threshold. CONCLUSIONS: The researchers conclude that extended-knee landing results in serious deformation of the meniscus and cartilage and increases the risk of bone-to-bone contact and serious knee injury when the load exceeds the threshold safety height. This risk is considerably greater than the risk of injury associated with walking downhill or flexion landing activities.

  5. Preliminary analysis of the mitochondrial genome evolutionary pattern in primates

    Institute of Scientific and Technical Information of China (English)

    Liang ZHAO; Xingtao ZHANG; Xingkui TAO; Weiwei WANG; Ming LI

    2012-01-01

    Since the birth of molecular evolutionary analysis,primates have been a central focus of study and mitochondrial DNA is well suited to these endeavors because of its unique features.Surprisingly,to date no comprehensive evaluation of the nucleotide substitution patterns has been conducted on the mitochondrial genome of primates.Here,we analyzed the evolutionary patterns and evaluated selection and recombination in the mitochondrial genomes of 44 Primates species downloaded from GenBank.The results revealed that a strong rate heterogeneity occurred among sites and genes in all comparisons.Likewise,an obvious decline in primate nucleotide diversity was noted in the subunit rRNAs and tRNAs as compared to the protein-coding genes.Within 13 protein-coding genes,the pattern of nonsynonymous divergence was similar to that of overall nucleotide divergence,while synonymous changes differed only for individual genes,indicating that the rate heterogeneity may result from the rate of change at nonsynonymous sites.Codon usage analysis revealed that there was intermediate codon usage bias in primate protein-coding genes,and supported the idea that GC mutation pressure might determine codon usage and that positive selection is not the driving force for the codon usage bias.Neutrality tests using site-specific positive selection from a Bayesian framework indicated no sites were under positive selection for any gene,consistent with near neutrality.Recombination tests based on the pairwise homoplasy test statistic supported complete linkage even for much older divergent primate species.Thus,with the exception of rate heterogeneity among mitochondrial genes,evaluating the validity assumed complete linkage and selective neutrality in primates prior to phylogenetic or phylogeographic analysis seems unnecessary.

  6. Preliminary analysis of the mitochondrial genome evolutionary pattern in primates.

    Science.gov (United States)

    Zhao, Liang; Zhang, Xingtao; Tao, Xingkui; Wang, Weiwei; Li, Ming

    2012-08-01

    Since the birth of molecular evolutionary analysis, primates have been a central focus of study and mitochondrial DNA is well suited to these endeavors because of its unique features. Surprisingly, to date no comprehensive evaluation of the nucleotide substitution patterns has been conducted on the mitochondrial genome of primates. Here, we analyzed the evolutionary patterns and evaluated selection and recombination in the mitochondrial genomes of 44 Primates species downloaded from GenBank. The results revealed that a strong rate heterogeneity occurred among sites and genes in all comparisons. Likewise, an obvious decline in primate nucleotide diversity was noted in the subunit rRNAs and tRNAs as compared to the protein-coding genes. Within 13 protein-coding genes, the pattern of nonsynonymous divergence was similar to that of overall nucleotide divergence, while synonymous changes differed only for individual genes, indicating that the rate heterogeneity may result from the rate of change at nonsynonymous sites. Codon usage analysis revealed that there was intermediate codon usage bias in primate protein-coding genes, and supported the idea that GC mutation pressure might determine codon usage and that positive selection is not the driving force for the codon usage bias. Neutrality tests using site-specific positive selection from a Bayesian framework indicated no sites were under positive selection for any gene, consistent with near neutrality. Recombination tests based on the pairwise homoplasy test statistic supported complete linkage even for much older divergent primate species. Thus, with the exception of rate heterogeneity among mitochondrial genes, evaluating the validity assumed complete linkage and selective neutrality in primates prior to phylogenetic or phylogeographic analysis seems unnecessary.

  7. Preliminary safety analysis for key design features of KALIMER-600

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. B.; Chang, W. P.; Suk, S. D.; Ha, K. S.; Jeong, H. Y.; Heo, S

    2004-03-01

    KAERI is developing the conceptual design of a Liquid Metal Reactor, KALIMER-600 (Korea Advanced LIquid MEtal Reactor) under the Long-term Nuclear R and D Program. KALIMER-600 addresses key issues regarding future nuclear power plants such as plant safety, economics, proliferation, and waste. In this report, key safety design features are described and safety analyses results for typical ATWS accidents in the KALIMER design with breakeven core are presented. First, the basic approach to achieve the safety goal is introduced in Chapter 1, and the event categorization and acceptance criteria for the KALIMER-600 safety analysis are described in Chapter 2. In Chapter 3, results of inherent safety evaluations for the KALIMER-600 conceptual design are presented. The KALIMER-600 core and plant system are designed to assure benign performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated Anticipated Transient Without Scram (ATWS) have been performed using the SSC-K code to investigate the KALIMER-600 system response to the events. They are categorized as Bounding Events (BEs) because of their low probability of occurrence. In Chapter 4, the analysis of flow blockage for KALIMER-600 with the MATRA-LMR-FB code, which has been developed for the internal flow blockage in a LMR subassembly. The cases with a blockage of 6-subchannel, 24-subchannel, and 54-subchannel are analyzed.The performance analysis of the KALIMER-600 containment and some evaluations for the behaviors during HCDA will be performed later.

  8. Preliminary safety analysis for key design features of KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, D. H.; Kwon, Y. M.; Chang, W. P.; Suk, S. D.; Lee, S. O.; Lee, Y. B.; Jeong, K. S

    2000-07-01

    KAERI is currently developing the conceptual design of a liquid metal reactor, KALIMER(Korea Advanced Liquid Metal Reactor) under the long-term nuclear R and D program. In this report, descriptions of the KALIMER safety design features and safety analyses results for selected ATWS accidents are presented. First, the basic approach to achieve the safety goal is introduced in chapter 1, and the safety evaluation procedure for the KALIMER design is described in chapter 2. It includes event selection, event categorization, description of design basis events, and beyond design basis events. In chapter 3, results of inherent safety evaluations for the KALIMER conceptual design are presented. The KALIMER core and plant system are designed to assure design performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated anticipated transient without scram(ATWS) have been performed to investigate the KALIMER system response to the events. They are categorized as bounding events(BEs) because of their low probability of occurrence. In chapter 4, the design of the KALIMER containment dome and the results of its performance analysis are presented. The designs of the existing LMR containment and the KALIMER containment dome have been compared in this chapter. Procedure of the containment performance analysis and the analysis results are described along with the accident scenario and source terms. Finally, a simple methodology is introduced to investigate the core kinetics and hydraulic behavior during HCDA in chapter 5. Mathematical formulations have been developed in the framework of the modified bethe-tait method, and scoping analyses have been performed for the KALIMER core behavior during super-prompt critical excursions.

  9. Preliminary RAMI analysis of DFLL TBS for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dagui [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230031 (China); Yuan, Run [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Wang, Jiaqun, E-mail: jiaqun.wang@fds.org.cn [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Wang, Fang; Wang, Jin [Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Energy Safety Technology, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

    2016-11-15

    Highlights: • We performed the functional analysis of the DFLL TBS. • We performed a failure mode analysis of the DFLL TBS. • We estimated the reliability and availability of the DFLL TBS. • The ITER RAMI approach was applied to the DFLL TBS for technical risk control in the design phase. - Abstract: ITER is the first fusion machine fully designed to prove the physics and technological basis for next fusion power plants. Among the main technical objectives of ITER is to test and validate design concepts of tritium breeding blankets relevant to the fusion power plants. To achieve this goal, China has proposed the dual functional lithium-lead test blanket module (DFLL TBM) concept design. The DFLL TBM and its associated ancillary system were called DFLL TBS. The DFLL TBS play a key role in next fusion reactor. In order to ensure reliable and available of DFLL TBS, the risk control project of DFLL TBS has been put on the schedule. As the stage of the ITER technical risk control policy, the RAMI (Reliability, Availability, Maintainability, Inspectability) approach was used to control the technical risk of ITER. In this paper, the RAMI approach was performed on the conceptual design of DFLL TBS. A functional breakdown was prepared on DFLL TBS, and the system was divided into 3 main functions and 72 basic functions. Based on the result of functional breakdown of DFLL TBS, the reliability block diagrams were prepared to estimate the reliability and availability of each function under the stipulated operating conditions. The inherent availability of the DFLL TBS expected after implementation of mitigation actions was calculated to be 98.57% over 2 years based on the ITER reliability database. A Failure Modes Effects and Criticality Analysis (FMECA) was performed with criticality charts highlighting the risk level of the different failure modes with regard to their probability of occurrence and their effects on the availability.

  10. Macroalgae as a Biomass Feedstock: A Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Roesijadi, Guritno; Jones, Susanne B.; Snowden-Swan, Lesley J.; Zhu, Yunhua

    2010-09-26

    A thorough of macroalgae analysis as a biofuels feedstock is warranted due to the size of this biomass resource and the need to consider all potential sources of feedstock to meet current biomass production goals. Understanding how to harness this untapped biomass resource will require additional research and development. A detailed assessment of environmental resources, cultivation and harvesting technology, conversion to fuels, connectivity with existing energy supply chains, and the associated economic and life cycle analyses will facilitate evaluation of this potentially important biomass resource.

  11. Statistical Analysis of Time Series Data (STATS). Users Manual (Preliminary)

    Science.gov (United States)

    1987-05-01

    15, 30. 60, 90, 120, andL -!/14:X.... 183 days are presently used. auto Page 1 of 10 wrpy *VtsE0> J1 record (continued) Field Variab Vlue D 2 NPRDS ...each event. 6 JEND + Order number of last period in time series to ( NPRDS ) select for analysis. If blank, the last period is assumed. 7 JPPF Plotting...values. 2 NPRDS + Actual number of periods for the event following on ’INO records until the next ID, BF, or LI record. IN record - T:E SERIES DATA

  12. A Preliminary Genetic Analysis of Complement 3 Gene and Schizophrenia.

    Directory of Open Access Journals (Sweden)

    Jianliang Ni

    Full Text Available Complement pathway activation was found to occur frequently in schizophrenia, and complement 3 (C3 plays a major role in this process. Previous studies have provided evidence for the possible role of C3 in the development of schizophrenia. In this study, we hypothesized that the gene encoding C3 (C3 may confer susceptibility to schizophrenia in Han Chinese. We analyzed 7 common single nucleotide polymorphisms (SNPs of C3 in 647 schizophrenia patients and 687 healthy controls. Peripheral C3 mRNA expression level was measured in 23 drug-naïve patients with schizophrenia and 24 controls. Two SNPs (rs1047286 and rs2250656 that deviated from Hardy-Weinberg equilibrium were excluded for further analysis. Among the remaining 5 SNPs, there was no significant difference in allele and genotype frequencies between the patient and control groups. Logistic regression analysis showed no significant SNP-gender interaction in either dominant model or recessive model. There was no significant difference in the level of peripheral C3 expression between the drug-naïve schizophrenia patients and healthy controls. In conclusion, the results of this study do not support C3 as a major genetic susceptibility factor in schizophrenia. Other factors in AP may have critical roles in schizophrenia and be worthy of further investigation.

  13. Analysis of the cavitating flow induced by an ultrasonic horn – Numerical 3D simulation for the analysis of vapour structures and the assessment of erosion-sensitive areas

    Directory of Open Access Journals (Sweden)

    Mottyll Stephan

    2014-03-01

    Full Text Available This paper reports the outcome of a numerical study of ultrasonic cavitation using a CFD flow algorithm based on a compressible density-based finite volume method with a low-Machnumber consistent flux function and an explicit time integration [15; 18] in combination with an erosion-detecting flow analysis procedure. The model is validated against erosion data of an ultrasonic horn for different gap widths between the horn tip and a counter sample which has been intensively investigated in previous material studies at the Ruhr University Bochum [23] as well as on first optical in-house flow measurement data which is presented in a companion paper [13]. Flow features such as subharmonic cavitation oscillation frequencies as well as constricted vapour cloud structures can also be observed by the vapour regions predicted in our simulation as well as by the detected collapse event field (collapse detector [12]. With a statistical analysis of transient wall loads we can determine the erosion sensitive areas qualitatively. Our simulation method can reproduce the influence of the gap width on vapour structure and on location of cavitation erosion.

  14. Preliminary Rock Physics Analysis on Lodgepole Formation in Manitoba, Canada

    Science.gov (United States)

    Kim, N.; Keehm, Y.

    2012-12-01

    We present rock physics analysis results of Lodgepole Formation, a carbonate reservoir in Daly Field, Manitoba, Canada. We confirmed that the Lodgepole Formation can be divided into six units in the study area: Basal Limestone, Cromer Shale, Cruickshank Crinoidal, Cruickshank Shale, Daly member and Flossie Lake member from the bottom, using eight well log data and previous works. We then performed rock physics analyses on four carbonate units (Basal Limestone, Cruickshank Crinoidal, Daly and Flossie Lake), such as Vp-porosity, AI-porosity, DEM (differential effective medium) modeling, and fluid substitution analysis. In Vp-porosity domain, the top unit, Flossie Lake member has lower porosity and higher velocity, while the other units show similar porosity and velocity. We think that this results from the diagenesis of Flossie Lake member since it bounds with unconformity. However, the four units show very similar trend in Vp-porosity domain, and we can report one Vp-porosity relation for all carbonate units of the Lodgepole formation. We also found that the acoustic impedance varies more than 10% from low porosity zone (3-6%) to high porosity zone (9-12%) from AI-porosity analysis. Thus one can delineate high porosity zone from seismic impedance data. DEM modeling showed that Flossie Lake would have relatively low aspect ratio of pores than the others, which implies that the top unit has been influenced by diagenesis. To determine fluid sensitivity of carbonate units, we conducted fluid substitution on four units from 100% water to 100% oil. The top unit, Flossie Lake, showed slight increase of Vp, which seems to be density effect. The others showed small decrease of Vp, but not significant. If we observe Vp/Vs rather than Vp, the sensitivity increases. However, fluid discrimination would be difficult because of high stiffness of rock frame. In summary, three lower carbonate units of Lodgepole Formation would be prospective and high porosity zone can be delineated

  15. Brain hemisphere dominance and vocational preference: a preliminary analysis.

    Science.gov (United States)

    Szirony, Gary Michael; Pearson, L Carolyn; Burgin, John S; Murray, Gerald C; Elrod, Lisa Marie

    2007-01-01

    Recent developments in split-brain theory add support to the concept of specialization within brain hemispheres. Holland's vocational personality theory may overlap with Human Information Processing (HIP) characteristics. Holland's six RIASEC codes were developed to identify vocational personality characteristics, and HIP scales were designed to measure hemispheric laterality. Relationships between the two scales were evaluated through canonical correlation with some significant results, however not all Holland scale scores correlated with left, right, or integrated hemispheric preference. Additional findings related to participants self-perception of music and math ability were also correlated. Findings on this added analysis revealed a high correlation between perception of musical ability and right brain function but not between mathematical concept and left brain alone. Implications regarding vocational choice and work are discussed.

  16. City of Hoboken Energy Surety Analysis: Preliminary Design Summary

    Energy Technology Data Exchange (ETDEWEB)

    Stamp, Jason Edwin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Baca, Michael J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Munoz-Ramos, Karina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Schenkman, Benjamin L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Eddy, John P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Smith, Mark A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Guttromson, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electric Power Systems Research Dept.; Henry, Jordan M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Critical Infrastructure Systems Dept.; Jensen, Richard Pearson [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Geomechanics Dept.

    2014-09-01

    In 2012, Hurricane Sandy devastated much of the U.S. northeast coastal areas. Among those hardest hit was the small community of Hoboken, New Jersey, located on the banks of the Hudson River across from Manhattan. This report describes a city-wide electrical infrastructure design that uses microgrids and other infrastructure to ensure the city retains functionality should such an event occur in the future. The designs ensure that up to 55 critical buildings will retain power during blackout or flooded conditions and include analysis for microgrid architectures, performance parameters, system control, renewable energy integration, and financial opportunities (while grid connected). The results presented here are not binding and are subject to change based on input from the Hoboken stakeholders, the integrator selected to manage and implement the microgrid, or other subject matter experts during the detailed (final) phase of the design effort.

  17. Analysis of organochlorine pesticides in human milk: preliminary results.

    Science.gov (United States)

    Campoy, C; Jiménez, M; Olea-Serrano, M F; Moreno-Frías, M; Cañabate, F; Olea, N; Bayés, R; Molina-Font, J A

    2001-11-01

    In the face of evidence of human milk contamination by organochlorine pesticides, an analysis was performed on samples of milk obtained from healthy lactating women in the provinces of Granada and Almeria in Southern Spain. The samples were obtained by the Neonate Section of the Department of Pediatrics of Granada University Hospital (Neonatology Division) and by the Neonatal Service of Poniente Hospital in El Ejido, Almería. A liquid-liquid extraction procedure was performed. The cleaning of the sample before gas chromatography-mass spectrometry (GC-MS) used silica Sep-Pak. Among other pesticides, aldrin, dieldrin, DDT and its metabolites, lindane, methoxychlor and endosulfan were identified. The presence of these products was confirmed by mass spectrometry. The identification and quantification of these organochlorine molecules is important because they have estrogenic effects.

  18. Preliminary Analysis of a Fully Solid State Magnetocaloric Refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    Abdelaziz, Omar [ORNL

    2016-01-01

    Magnetocaloric refrigeration is an alternative refrigeration technology with significant potential energy savings compared to conventional vapor compression refrigeration technology. Most of the reported active magnetic regenerator (AMR) systems that operate based on the magnetocaloric effect use heat transfer fluid to exchange heat, which results in complicated mechanical subsystems and components such as rotating valves and hydraulic pumps. In this paper, we propose an alternative mechanism for heat transfer between the AMR and the heat source/sink. High-conductivity moving rods/sheets (e.g. copper, brass, iron, graphite, aluminum or composite structures from these) are utilized instead of heat transfer fluid significantly enhancing the heat transfer rate hence cooling/heating capacity. A one-dimensional model is developed to study the solid state AMR. In this model, the heat exchange between the solid-solid interfaces is modeled via a contact conductance, which depends on the interface apparent pressure, material hardness, thermal conductivity, surface roughness, surface slope between the interfaces, and material filled in the gap between the interfaces. Due to the tremendous impact of the heat exchange on the AMR cycle performance, a sensitivity analysis is conducted employing a response surface method, in which the apparent pressure, effective surface roughness and grease thermal conductivity are the uncertainty factors. COP and refrigeration capacity are presented as the response in the sensitivity analysis to reveal the important factors influencing the fully solid state AMR and optimize the solid state AMR efficiency. The performances of fully solid state AMR and traditional AMR are also compared and discussed in present work. The results of this study will provide general guidelines for designing high performance solid state AMR systems.

  19. Preliminary analysis of cerebrospinal fluid proteome in patients with neurocysticercosis

    Institute of Scientific and Technical Information of China (English)

    TIAN Xiao-jun; LI Jing-yi; HUANG Yong; XUE Yan-ping

    2009-01-01

    Background Neurocysticercosis is the infection of the nervous system by the larvae of Taenia solium (T. solium). Despite continuous effort, the experimental diagnosis of neurocysticercosis remains unresolved. Since the cerebrospinal fluid (CSF) contacts with the brain, dynamic information about pathological processes of the brain is likely to be reflected in CSF. Therefore, CSF may serve as a rich source of putative biomarkers related to neurocysticercosis. Comparative proteomic analysis of CSF of neurocysticercosis patients and control subjects may find differentially expressed proteins. Methods Two-dimensional difference in gel electrophoresis (2D-DIGE) was used to investigate differentially expressed proteins in CSF of patients with neurocysticercosis by comparing the protein profile of CSF from neurocysticercosis patients with that from control subjects. The differentially expressed spots/proteins were recognized with matrix-assisted laser desorption/ionization-time of flight-time of flight (MALDI-TOF-TOF) mass spectrometry. Results Forty-four enzyme digested peptides were obtained from 4 neurocysticercotic patients. Twenty-three were identified through search of the NCBI protein database with Mascot software, showing 19 up-expressed and 4 down-expressed. Of these proteins, 26S proteosome related to ATP- and ubiquitin-dependent degradation of proteins and lipocalin type prostaglandin D synthase involved in PGD2-synthesis and extracellular transporter activities were up-expressed, while transferrin related to iron metabolism within the brain was down-expressed. Conclusions This study established the proteomic profile of pooled CSF from 4 patients with neurocysticercosis, suggesting the potential value of proteomic analysis for the study of candidate biomarkers involved in the diagnosis or pathogenesis of neurocysticercosis.

  20. Preliminary Design and Analysis of the GIFTS Instrument Pointing System

    Science.gov (United States)

    Zomkowski, Paul P.

    2003-01-01

    The Geosynchronous Imaging Fourier Transform Spectrometer (GIFTS) Instrument is the next generation spectrometer for remote sensing weather satellites. The GIFTS instrument will be used to perform scans of the Earth s atmosphere by assembling a series of field-of- views (FOV) into a larger pattern. Realization of this process is achieved by step scanning the instrument FOV in a contiguous fashion across any desired portion of the visible Earth. A 2.3 arc second pointing stability, with respect to the scanning instrument, must be maintained for the duration of the FOV scan. A star tracker producing attitude data at 100 Hz rate will be used by the autonomous pointing algorithm to precisely track target FOV s on the surface of the Earth. The main objective is to validate the pointing algorithm in the presence of spacecraft disturbances and determine acceptable disturbance limits from expected noise sources. Proof of concept validation of the pointing system algorithm is carried out with a full system simulation developed using Matlab Simulink. Models for the following components function within the full system simulation: inertial reference unit (IRU), attitude control system (ACS), reaction wheels, star tracker, and mirror controller. With the spacecraft orbital position and attitude maintained to within specified limits the pointing algorithm receives quaternion, ephemeris, and initialization data that are used to construct the required mirror pointing commands at a 100 Hz rate. This comprehensive simulation will also aid in obtaining a thorough understanding of spacecraft disturbances and other sources of pointing system errors. Parameter sensitivity studies and disturbance analysis will be used to obtain limits of operability for the GIFTS instrument. The culmination of this simulation development and analysis will be used to validate the specified performance requirements outlined for this instrument.

  1. Erosion Negril Beach

    NARCIS (Netherlands)

    Ten Ham, D.; Henrotte, J.; Kraaijeveld, R.; Milosevic, M.; Smit, P.

    2006-01-01

    The ongoing erosion of the Negril Beach has become worse the past decade. In most places along the coast line, the beach will be gone in approximately 10 years. This will result in a major decrease of incomes that are made by the local tourist sector. To prevent the erosion this study has been perfo

  2. Saliva and dental erosion

    Science.gov (United States)

    BUZALAF, Marília Afonso Rabelo; HANNAS, Angélicas Reis; KATO, Melissa Thiemi

    2012-01-01

    Dental erosion is a multifactorial condition. The consideration of chemical, biological and behavioral factors is fundamental for its prevention and therapy. Among the biological factors, saliva is one of the most important parameters in the protection against erosive wear. Objective This review discusses the role of salivary factors on the development of dental erosion. Material and Methods A search was undertaken on MEDLINE website for papers from 1969 to 2010. The keywords used in the research were "saliva", "acquired pellicle", "salivary flow", "salivary buffering capacity" and "dental erosion". Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. Results Several characteristics and properties of saliva play an important role in dental erosion. Salivary clearance gradually eliminates the acids through swallowing and saliva presents buffering capacity causing neutralization and buffering of dietary acids. Salivary flow allows dilution of the acids. In addition, saliva is supersaturated with respect to tooth mineral, providing calcium, phosphate and fluoride necessary for remineralization after an erosive challenge. Furthermore, many proteins present in saliva and acquired pellicle play an important role in dental erosion. Conclusions Saliva is the most important biological factor affecting the progression of dental erosion. Knowledge of its components and properties involved in this protective role can drive the development of preventive measures targeting to enhance its known beneficial effects. PMID:23138733

  3. Saliva and dental erosion

    Directory of Open Access Journals (Sweden)

    Marília Afonso Rabelo Buzalaf

    2012-10-01

    Full Text Available Dental erosion is a multifactorial condition. The consideration of chemical, biological and behavioral factors is fundamental for its prevention and therapy. Among the biological factors, saliva is one of the most important parameters in the protection against erosive wear. Objective: This review discusses the role of salivary factors on the development of dental erosion. Material and Methods: A search was undertaken on MeDLINe website for papers from 1969 to 2010. The keywords used in the research were "saliva", "acquired pellicle", "salivary flow", "salivary buffering capacity" and "dental erosion". Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. Results: Several characteristics and properties of saliva play an important role in dental erosion. Salivary clearance gradually eliminates the acids through swallowing and saliva presents buffering capacity causing neutralization and buffering of dietary acids. Salivary flow allows dilution of the acids. In addition, saliva is supersaturated with respect to tooth mineral, providing calcium, phosphate and fluoride necessary for remineralization after an erosive challenge. Furthermore, many proteins present in saliva and acquired pellicle play an important role in dental erosion. Conclusions: Saliva is the most important biological factor affecting the progression of dental erosion. Knowledge of its components and properties involved in this protective role can drive the development of preventive measures targeting to enhance its known beneficial effects.

  4. Preliminary analysis of the use of smartwatches for longitudinal health monitoring.

    Science.gov (United States)

    Jovanov, Emil

    2015-08-01

    New generations of smartwatches feature continuous measurement of physiological parameters, such as heart rate, galvanic skin resistance (GSR), and temperature. In this paper we present the results of preliminary analysis of the use of Basis Peak smartwatch for longitudinal health monitoring during a 4 month period. Physiological measurements during sleep are validated using Zephyr Bioharness 3 monitor and SOMNOscreen+ polysomnographic monitoring system from SOMNOmedics. Average duration of sequences with no missed data was 49.9 minutes, with maximum length of 17 hours, and they represent 88.88% of recording time. Average duration of the charging event was 221.9 min, and average time between charges was 54 hours, with maximum duration of the charging event of 16.3 hours. Preliminary results indicate that the physiological monitoring performance of existing smartwatches provides sufficient performance for longitudinal monitoring of health status and analysis of health and wellness trends.

  5. Relative risk analysis in regulating the use of radiation-emitting medical devices. A preliminary application

    Energy Technology Data Exchange (ETDEWEB)

    Jones, E.D.; Banks, W.W.; Altenbach, T.J.; Fischer, L.E. [Lawrence Livermore National Lab., CA (United States)

    1995-09-01

    This report describes a preliminary application of an analysis approach for assessing relative risks in the use of radiation- emitting medical devices. Results are presented on human-initiated actions and failure modes that are most likely to occur in the use of the Gamma Knife, a gamma irradiation therapy device. This effort represents an initial step in a US Nuclear Regulatory Commission (NRC) plan to evaluate the potential role of risk analysis in regulating the use of nuclear medical devices. For this preliminary application of risk assessment, the focus was to develop a basic process using existing techniques for identifying the most likely risk contributors and their relative importance. The approach taken developed relative risk rankings and profiles that incorporated the type and quality of data available and could present results in an easily understood form. This work was performed by the Lawrence Livermore National Laboratory for the NRC.

  6. A Preliminary Tsunami Vulnerability Analysis for Yenikapi Region in Istanbul

    Science.gov (United States)

    Ceren Cankaya, Zeynep; Suzen, Lutfi; Cevdet Yalciner, Ahmet; Kolat, Cagil; Aytore, Betul; Zaytsev, Andrey

    2015-04-01

    One of the main requirements during post disaster recovery operations is to maintain proper transportation and fluent communication at the disaster areas. Ports and harbors are the main transportation hubs which must work with proper performance at all times especially after the disasters. Resilience of coastal utilities after earthquakes and tsunamis have major importance for efficient and proper rescue and recovery operations soon after the disasters. Istanbul is a mega city with its various coastal utilities located at the north coast of the Sea of Marmara. At Yenikapi region of Istanbul, there are critical coastal utilities and vulnerable coastal structures and critical activities occur daily. Fishery ports, commercial ports, small craft harbors, passenger terminals of intercity maritime transportation, water front commercial and/or recreational structures are some of the examples of coastal utilization which are vulnerable against marine disasters. Therefore their vulnerability under tsunami or any other marine hazard to Yenikapi region of Istanbul is an important issue. In this study, a methodology of vulnerability analysis under tsunami attack is proposed with the applications to Yenikapi region. In the study, high resolution (1m) GIS database of Istanbul Metropolitan Municipality (IMM) is used and analyzed by using GIS implementation. The bathymetry and topography database and the vector dataset containing all buildings/structures/infrastructures in the study area are obtained for tsunami numerical modeling for the study area. GIS based tsunami vulnerability assessment is conducted by applying the Multi-criteria Decision Making Analysis (MCDA). The tsunami parameters from deterministically defined worst case scenarios are computed from the simulations using tsunami numerical model NAMI DANCE. The vulnerability parameters in the region due to two different classifications i) vulnerability of buildings/structures and ii) vulnerability of (human) evacuation

  7. Sammon mapping for preliminary analysis in Hyperspectral Imagery

    Directory of Open Access Journals (Sweden)

    Nicolae APOSTOLESCU

    2016-03-01

    Full Text Available The main goal of this paper is to present the implementation of the Sammon algorithm developed for finding N points in a lower m-dimensional subspace, where the original points are from a high n-dimensional space. This mapping is done so interpoints Euclidian distances in m-space correspond to the distances measured in the n-dimensional space. This method known as non-linear projection method or multidimensional scaling (MDS aims to preserve the global properties of points. The method is based on the idea of transforming the original, n-dimensional input space into a reduced, m-dimensional one, where mAnalysis (PCA may be applied as a pre-processing procedure for starting, in order to obtain the N points in the lower subspace. The algorithm was tested on hyperspectral data with spectra of various lengths. Depending of the size of the input data (number of points, the number of learning iterations and computational facilities available, Sammon mapping might be computationally expensive.

  8. A simplified procedure of linear regression in a preliminary analysis

    Directory of Open Access Journals (Sweden)

    Silvia Facchinetti

    2013-05-01

    Full Text Available The analysis of a statistical large data-set can be led by the study of a particularly interesting variable Y – regressed – and an explicative variable X, chosen among the remained variables, conjointly observed. The study gives a simplified procedure to obtain the functional link of the variables y=y(x by a partition of the data-set into m subsets, in which the observations are synthesized by location indices (mean or median of X and Y. Polynomial models for y(x of order r are considered to verify the characteristics of the given procedure, in particular we assume r= 1 and 2. The distributions of the parameter estimators are obtained by simulation, when the fitting is done for m= r + 1. Comparisons of the results, in terms of distribution and efficiency, are made with the results obtained by the ordinary least square methods. The study also gives some considerations on the consistency of the estimated parameters obtained by the given procedure.

  9. Social network analysis in identifying influential webloggers: A preliminary study

    Science.gov (United States)

    Hasmuni, Noraini; Sulaiman, Nor Intan Saniah; Zaibidi, Nerda Zura

    2014-12-01

    In recent years, second generation of internet-based services such as weblog has become an effective communication tool to publish information on the Web. Weblogs have unique characteristics that deserve users' attention. Some of webloggers have seen weblogs as appropriate medium to initiate and expand business. These webloggers or also known as direct profit-oriented webloggers (DPOWs) communicate and share knowledge with each other through social interaction. However, survivability is the main issue among DPOW. Frequent communication with influential webloggers is one of the way to keep survive as DPOW. This paper aims to understand the network structure and identify influential webloggers within the network. Proper understanding of the network structure can assist us in knowing how the information is exchanged among members and enhance survivability among DPOW. 30 DPOW were involved in this study. Degree centrality and betweenness centrality measurement in Social Network Analysis (SNA) were used to examine the strength relation and identify influential webloggers within the network. Thus, webloggers with the highest value of these measurements are considered as the most influential webloggers in the network.

  10. SLUDGE TREATMENT PROJECT ENGINEERED CONTAINER RETRIEVAL AND TRANSFER SYSTEM PRELIMINARY DESIGN HAZARD ANALYSIS SUPPLEMENT 1

    Energy Technology Data Exchange (ETDEWEB)

    FRANZ GR; MEICHLE RH

    2011-07-18

    This 'What/If' Hazards Analysis addresses hazards affecting the Sludge Treatment Project Engineered Container Retrieval and Transfer System (ECRTS) NPH and external events at the preliminary design stage. In addition, the hazards of the operation sequence steps for the mechanical handling operations in preparation of Sludge Transport and Storage Container (STSC), disconnect STSC and prepare STSC and Sludge Transport System (STS) for shipping are addressed.

  11. Preliminary Failure Modes and Effects Analysis of the US Massive Gas Injection Disruption Mitigation System Design

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2013-10-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a candidate design for the ITER Disruption Mitigation System. This candidate is the Massive Gas Injection System that provides machine protection in a plasma disruption event. The FMEA was quantified with “generic” component failure rate data as well as some data calculated from operating facilities, and the failure events were ranked for their criticality to system operation.

  12. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2007-08-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  13. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2010-06-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  14. PRELIMINARY PHYTOCHEMICAL ANALYSIS AND ACUTE ORAL TOXICITY STUDY OF CLITORIA TERNATEA LINN. ROOTS IN ALBINO MICE

    Directory of Open Access Journals (Sweden)

    Deka Manalisha

    2011-12-01

    Full Text Available Clitoria ternatea has been using since the ancient times for its medicinal values. Almost all the parts of the plant have medicinal property. The root of the plant is reported to have anti diarrheal, Anti histamic, cholinergic activity etc. Traditionally the root has been using for the treatment of many diseases like leucorrhoea, diarrhea, urinary problems, diuretic, impotency, stomach trouble etc. The present study was designed to investigate the preliminary phytochemical analysis and acute oral toxicity of the root of the plant. The shed dried materials were grinded and used in the study. The preliminary phytochemical analysis was done by following standard protocols. For acute oral toxicity study, methanolic extract of the root was used. The extract was prepared by standard protocol. The preliminary phytochemical analysis showed the presence of proteins, carbohydrates, glycosides, resins, saponin, flavonoid, alkaloids, steroids and phenol. The acute oral toxicity study showed no mortality up to a dose of 3000 mg per kg body weight. The presence of plant chemicals revealed the medicinal values and the non toxic property of the plant indicated the value of the plant as medicine. Thus we can conclude that, the root of the plant can be used as a safe drug against many diseases.

  15. PRELIMINARY PHYTOCHEMICAL ANALYSIS AND ACUTE ORAL TOXICITY STUDY OF MUCUNA PRURIENS LINN. IN ALBINO MICE

    Directory of Open Access Journals (Sweden)

    Deka Manalisha

    2012-02-01

    Full Text Available Mucuna Pruriens Linn. is an annual, climbing shrub which has an important place among aphrodisiac herbs in India since the ancient times. The plant has been using traditionally for many medicinal purposes such as Infertility, Parkinson’s disease, Loss of libido, Antioxidant, Anti venom, Anti microbial etc. The present study was carried out to investigate the preliminary phytochemical analysis and acute oral toxicity of the seeds of M.pruriens on albino mice. Matured seeds of M.pruriens were dried in shed and grinded in a mechanical grinder. The preliminary phytochemical analysis was done by following standard protocols. For acute oral toxicity study, methanolic extract of the seeds were used. The extract was prepared in a Soxlet apparatus. The preliminary phytochemical analysis showed the presence of protein, carbohydrates, glycosides, alkaloids, steroids, flavonoids, phenols and tannins. The acute oral toxicity study showed no mortality up to a dose of 4000 mg per kg body weight. The presence of plant chemicals revealed the medicinal values and the non toxic property of the plant indicated the value of the plant as medicine. Thus, we can conclude that, the seed of the plant can be used as a safe drug against many diseases.

  16. 大理河流域土壤侵蚀风险及其空间格局分析%Analysis of soil erosion risk and its spatial pattern in Dali river basin

    Institute of Scientific and Technical Information of China (English)

    陈琳; 张喜旺; 刘剑锋; 周建郑

    2013-01-01

    本文利用遥感影像提取大理河流域相关信息,采用水利部部颁标准评价土壤侵蚀风险等级,并与地形特征进行叠加分析.结果显示:研究区侵蚀风险以中度和轻度为主;坡度是主要影响因素,坡度越大侵蚀风险区越集中,尤其是强度及以上区域,集中程度达到90%以上;侵蚀主要分布在1000m-1400m的两个高程带内.研究结果可以辅助管理部门进行侵蚀治理决策.%This paper extracted the spatial information of Dali river basin from RS imagery,and assessed the soil erosion risk according to the National Professional Standard for classification and gradation of soil erosion.Subsequently the topographical features of the study area were used in overlay analysis with erosion risk.The results showed that the dominant soil erosion risk is moderate and slight in the basin area; the slope is the main influencing factors,the greater the slope gradient is,the more concentrated the erosion risk areas are,especially in erosion risk areas where greater than more severe erosion,the concentration is more than 90%.Erosion is mainly distributed in the two elevation zones of 1000m-1400m.These results could be used to assist the management for decision-making department.

  17. Preliminary CFD Analysis for HVAC System Design of a Containment Building

    Energy Technology Data Exchange (ETDEWEB)

    Son, Sung Man; Choi, Choengryul [ELSOLTEC, Yongin (Korea, Republic of); Choo, Jae Ho; Hong, Moonpyo; Kim, Hyungseok [KEPCO Engineering and Construction, Gimcheon (Korea, Republic of)

    2016-10-15

    HVAC (Heating, Ventilation, Air Conditioning) system has been mainly designed based on overall heat balance and averaging concepts, which is simple and useful for designing overall system. However, such a method has the disadvantage that cannot predict the local flow and temperature distributions in a containment building. In this study, a CFD (Computational Fluid Dynamics) preliminary analysis is carried out to obtain detailed flow and temperature distributions in a containment building and to ensure that such information can be obtained via CFD analysis. This approach can be useful for hydrogen analysis in an accident related to hydrogen released into a containment building. In this study, CFD preliminary analysis has been performed to obtain the detailed information of the reactor containment building by using the CFD analysis techniques and to ensure that such information can be obtained via CFD analysis. We confirmed that CFD analysis can offer enough detailed information about flow patterns and temperature field and that CFD technique is a useful tool for HVAC design of nuclear power plants.

  18. Polyanhydride degradation and erosion.

    Science.gov (United States)

    Göpferich, A; Tessmar, J

    2002-10-16

    It was the intention of this paper to give a survey on the degradation and erosion of polyanhydrides. Due to the multitude of polymers that have been synthesized in this class of material in recent years, it was not possible to discuss all polyanhydrides that have gained in significance based on their application. It was rather the intention to provide a broad picture on polyanhydride degradation and erosion based on the knowledge that we have from those polymers that have been intensively investigated. To reach this goal this review contains several sections. First, the foundation for an understanding of the nomenclature are laid by defining degradation and erosion which was deemed necessary because many different definitions exist in the current literature. Next, the properties of major classes of anhydrides are reviewed and the impact of geometry on degradation and erosion is discussed. A complicated issue is the control of drug release from degradable polymers. Therefore, the aspect of erosion-controlled release and drug stability inside polyanhydrides are discussed. Towards the end of the paper models are briefly reviewed that describe the erosion of polyanhydrides. Empirical models as well as Monte-Carlo-based approaches are described. Finally it is outlined how theoretical models can help to answer the question why polyanhydrides are surface eroding. A look at the microstructure and the results from these models lead to the conclusion that polyanhydrides are surface eroding due to their fast degradation. However they switch to bulk erosion once the device dimensions drop below a critical limit.

  19. GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of Jasminum cuspidatum leaves

    National Research Council Canada - National Science Library

    Singumsetty Vinay; Shaik Karimulla; Devarajan Saravanan

    2014-01-01

    The purpose of the present study was investigating the GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of the leaves of Jasminum cuspidatum...

  20. ANSI/ASHRAE/IESNA Standard 90.1-2010 Preliminary Determination Quantitative Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, Mark A.; Liu, Bing; Rosenberg, Michael I.

    2010-11-01

    The United States (U.S.) Department of Energy (DOE) conducted a preliminary quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010 (ASHRAE Standard 90.1-2010, Standard 90.1-2010, or 2010 edition) would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2007(ASHRAE Standard 90.1-2007, Standard 90.1-2007, or 2007 edition). The preliminary analysis considered each of the 109 addenda to ASHRAE Standard 90.1-2007 that were included in ASHRAE Standard 90.1-2010. All 109 addenda processed by ASHRAE in the creation of Standard 90.1-2010 from Standard 90.1-2007 were reviewed by DOE, and their combined impact on a suite of 16 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s preliminary determination. However, out of the 109 addenda, 34 were preliminarily determined to have measureable and quantifiable impact.

  1. Erosion resistance of bionic functional surfaces inspired from desert scorpions.

    Science.gov (United States)

    Zhiwu, Han; Junqiu, Zhang; Chao, Ge; Li, Wen; Ren, Luquan

    2012-02-01

    In this paper, a bionic method is presented to improve the erosion resistance of machine components. Desert scorpion (Androctonus australis) is a typical animal living in sandy deserts, and may face erosive action of blowing sand at a high speed. Based on the idea of bionics and biologic experimental techniques, the mechanisms of the sand erosion resistance of desert scorpion were investigated. Results showed that the desert scorpions used special microtextures such as bumps and grooves to construct the functional surfaces to achieve the erosion resistance. In order to understand the erosion resistance mechanisms of such functional surfaces, the combination of computational and experimental research were carried out in this paper. The Computational Fluid Dynamics (CFD) method was applied to predict the erosion performance of the bionic functional surfaces. The result demonstrated that the microtextured surfaces exhibited better erosion resistance than the smooth surfaces. The further erosion tests indicated that the groove surfaces exhibited better erosion performance at 30° injection angle. In order to determine the effect of the groove dimensions on the erosion resistance, regression analysis of orthogonal multinomials was also performed under a certain erosion condition, and the regression equation between the erosion rate and groove distance, width, and height was established.

  2. Preliminary phytochemical analysis and DPPH free radical scavenging activity of Trewia nudiflora Linn. roots and leaves.

    Science.gov (United States)

    Balakrishnan, N; Srivastava, Mayank; Tiwari, Pallavi

    2013-11-01

    Oxidative stress is one of the major causative factors of many chronic and degenerative diseases. Plants have been used in traditional medicine in different parts of world for thousands of years and continue to provide new remedies for human kind. The present study was to investigate the preliminary phytochemical analysis of various extracts of roots and leaves of Trewia nudiflora (Euphorbiaceae) and antioxidant activity by 1,1,diphenyl-2-picryl hydrazyl (DPPH) radical scavenging method. The preliminary phytochemical screening showed the presence of several phytochemicals including alkaloids, glycosides, flavonoids, steroids, phenolic compounds and tannins. The ethanol and aqueous extracts of roots and leaves of Trewia nudiflora showed significant antioxidant activity compared to standard drug ascorbic acid.

  3. Sets resilient to erosion

    CERN Document Server

    Pegden, Wesley

    2011-01-01

    The erosion of a set in Euclidean space by a radius r>0 is the subset of X consisting of points at distance >/-r from the complement of X. A set is resilient to erosion if it is similar to its erosion by some positive radius. We give a somewhat surprising characterization of resilient sets, consisting in one part of simple geometric constraints on convex resilient sets, and, in another, a correspondence between nonconvex resilient sets and scale-invariant (e.g., 'exact fractal') sets.

  4. CONSTRUCTION OF THE CHINESE LEARNERS' PARALLEL CORPUS OF JAPANESE AND ITS PRELIMINARY ANALYSIS

    Directory of Open Access Journals (Sweden)

    Masatake Dantsuji

    2004-01-01

    Full Text Available This study aims to introduce the project to construct the Chinese learners' corpus (LC of Japanese at Dalian University of Technology (DUT, and detail the LC construction, development of DUT Corpus Linguistics Tools, and contribution to the education of Japanese as a second language. The outstanding characteristic of the LC is its parallel form with learners' Japanese texts and their Chinese translation, which enables us to make comprehensive analysis of the influence of Chinese (L1 to Japanese (L2. We have made a preliminary analysis of the errors contained.

  5. Preliminary Design and Analysis of the ARES Atmospheric Flight Vehicle Thermal Control System

    Science.gov (United States)

    Gasbarre, J. F.; Dillman, R. A.

    2003-01-01

    The Aerial Regional-scale Environmental Survey (ARES) is a proposed 2007 Mars Scout Mission that will be the first mission to deploy an atmospheric flight vehicle (AFV) on another planet. This paper will describe the preliminary design and analysis of the AFV thermal control system for its flight through the Martian atmosphere and also present other analyses broadening the scope of that design to include other phases of the ARES mission. Initial analyses are discussed and results of trade studies are presented which detail the design process for AFV thermal control. Finally, results of the most recent AFV thermal analysis are shown and the plans for future work are discussed.

  6. Mapping monthly rainfall erosivity in Europe.

    Science.gov (United States)

    Ballabio, Cristiano; Borrelli, Pasquale; Spinoni, Jonathan; Meusburger, Katrin; Michaelides, Silas; Beguería, Santiago; Klik, Andreas; Petan, Sašo; Janeček, Miloslav; Olsen, Preben; Aalto, Juha; Lakatos, Mónika; Rymszewicz, Anna; Dumitrescu, Alexandru; Tadić, Melita Perčec; Diodato, Nazzareno; Kostalova, Julia; Rousseva, Svetla; Banasik, Kazimierz; Alewell, Christine; Panagos, Panos

    2017-02-01

    Rainfall erosivity as a dynamic factor of soil loss by water erosion is modelled intra-annually for the first time at European scale. The development of Rainfall Erosivity Database at European Scale (REDES) and its 2015 update with the extension to monthly component allowed to develop monthly and seasonal R-factor maps and assess rainfall erosivity both spatially and temporally. During winter months, significant rainfall erosivity is present only in part of the Mediterranean countries. A sudden increase of erosivity occurs in major part of European Union (except Mediterranean basin, western part of Britain and Ireland) in May and the highest values are registered during summer months. Starting from September, R-factor has a decreasing trend. The mean rainfall erosivity in summer is almost 4 times higher (315MJmmha(-1)h(-1)) compared to winter (87MJmmha(-1)h(-1)). The Cubist model has been selected among various statistical models to perform the spatial interpolation due to its excellent performance, ability to model non-linearity and interpretability. The monthly prediction is an order more difficult than the annual one as it is limited by the number of covariates and, for consistency, the sum of all months has to be close to annual erosivity. The performance of the Cubist models proved to be generally high, resulting in R(2) values between 0.40 and 0.64 in cross-validation. The obtained months show an increasing trend of erosivity occurring from winter to summer starting from western to Eastern Europe. The maps also show a clear delineation of areas with different erosivity seasonal patterns, whose spatial outline was evidenced by cluster analysis. The monthly erosivity maps can be used to develop composite indicators that map both intra-annual variability and concentration of erosive events. Consequently, spatio-temporal mapping of rainfall erosivity permits to identify the months and the areas with highest risk of soil loss where conservation measures should be

  7. Soft drinks and in vitro dental erosion.

    Science.gov (United States)

    Gravelle, Brent L; Hagen Ii, Ted W; Mayhew, Susan L; Crumpton, Brooks; Sanders, Tyler; Horne, Victoria

    2015-01-01

    The purpose of this investigation was to determine to what extent the in vitro exposure of healthy teeth to various commonly consumed carbonated soft drinks may precipitate dental erosion. Forty-two healthy, extracted, previously unerupted human molars were weighed prior to, during, and after suspension in various sugared and diet or zero-calorie carbonated beverages for 20 days; the specimens were stored at room temperature while being stirred at 275 rpm. The percentage decrease in tooth weight from before to after exposure represented the weight loss due to enamel erosion; values in the experimental groups varied from 3.22% to 44.52% after 20 days' exposure. Data were subjected to analysis of variance and post hoc Scheffe testing at a level of α = 0.05. Nonsugared drinks (diet and zero-calorie) as a whole were more erosive than sugared beverages. A significant positive correlation was found between the amount of titratable acid and percentage of tooth erosion, while a significant negative correlation was revealed between the beverage pH and percentage of tooth erosion. No significant correlations were found between calcium or phosphate ion concentrations and the amount of erosion. It appears that enamel erosion is dependent on not only the beverage flow rate, pH, and amount of titratable acid, but also whether the soft drink is of the diet or zero-calorie variety, which reflects the type of artificial sweetener present.

  8. Multidisciplinary High-Fidelity Analysis and Optimization of Aerospace Vehicles. Part 2; Preliminary Results

    Science.gov (United States)

    Walsh, J. L.; Weston, R. P.; Samareh, J. A.; Mason, B. H.; Green, L. L.; Biedron, R. T.

    2000-01-01

    An objective of the High Performance Computing and Communication Program at the NASA Langley Research Center is to demonstrate multidisciplinary shape and sizing optimization of a complete aerospace vehicle configuration by using high-fidelity finite-element structural analysis and computational fluid dynamics aerodynamic analysis in a distributed, heterogeneous computing environment that includes high performance parallel computing. A software system has been designed and implemented to integrate a set of existing discipline analysis codes, some of them computationally intensive, into a distributed computational environment for the design of a high-speed civil transport configuration. The paper describes both the preliminary results from implementing and validating the multidisciplinary analysis and the results from an aerodynamic optimization. The discipline codes are integrated by using the Java programming language and a Common Object Request Broker Architecture compliant software product. A companion paper describes the formulation of the multidisciplinary analysis and optimization system.

  9. Actinides, accelerators and erosion

    OpenAIRE

    Fifield L. K.; Tims S.G.

    2012-01-01

    Fallout isotopes can be used as artificial tracers of soil erosion and sediment accumulation. The most commonly used isotope to date has been 137Cs. Concentrations of 137Cs are, however, significantly lower in the Southern Hemisphere, and furthermore have now declined to 35% of original values due to radioactive decay. As a consequence the future utility of 137Cs is limited in Australia, with many erosion applications becoming untenable within the next 20 years, and there is a need to replace...

  10. Towards large-scale monitoring of soil erosion in Africa: Accounting for the dynamics of rainfall erosivity

    Science.gov (United States)

    Vrieling, Anton; Hoedjes, Joost C. B.; van der Velde, Marijn

    2014-04-01

    Soil erosion by water occurs on sloped terrain when erosive rainfall and consequent surface runoff act on soils that are not well-protected by vegetation or other soil protective measures. Both rainfall erosivity and vegetation cover are highly variable through space and time. Joint accounting for the variability of these factors is required to effectively map and monitor soil erosion. However, most studies merely use average annual erosivity values, partly due to data paucity. This study analyses the variability of rainfall erosivity across Africa through the use of 3-hourly TRMM Multi-satellite Precipitation Analysis (TMPA) precipitation data. We obtained average annual erosivity estimates from 15 yr of TMPA data (1998-2012) using intensity-erosivity relationships. Our estimates showed a positive correlation (r = 0.84) with long-term annual erosivity values of 37 stations obtained from literature. Our TMPA-analysis confirmed and mapped the large interannual variability, with maximum annual erosivity often exceeding two to three times the mean value, especially in semi-arid areas. Seasonal variability of erosivity was investigated from TMPA-based average monthly erosivity estimates, which resulted in similar seasonal patterns as those reported in literature. We conclude that (1) spatial and temporal variability of erosivity is important and needs to be accounted for in combination with vegetation cover when monitoring soil erosion; and (2) 3-hourly TMPA data allow for a good first estimate of the variability of erosivity in Africa, which could be improved by upcoming techniques that provide more accurate rainfall information at higher spatial and temporal resolutions.

  11. Application of 3D photo-reconstruction in soil erosion studies

    Science.gov (United States)

    Castillo, Carlos; James, Michael; Pérez, Rafael; Gómez, Jose Alfonso

    2014-05-01

    3D photo-reconstruction (3D-PR) has been applied successfully to obtain elevation models using uncalibrated and nonmetric cameras for a range of geoscience applications (e.g. James and Robson, 2012), including gully erosion assessment (Castillo et al., 2012). However, its application in soil erosion studies is currently at the outset. The aim of this work is to compare 3D-PR with conventional techniques that have been employed traditionally for different purposes in soil erosion studies. In this preliminary work, we tested three applications that involve volume calculations: estimation of soil bulk density (BD), quantification of soil erosion at road banks (RB) and sedimentation rates behind check dams (CD). For each analysis, a PR field survey was carried out simultaneously with a conventional method (volume of water was used for BD, and total station surveys for RB and CD). For the 3D-PR technique, the accuracy as a function of the number of pictures taken was evaluated. In this study we explore the difference in the volume estimates between 3D-PR and conventional techniques as well as the time requirements for each method in order to compare their performance and optimal field of application.

  12. Advances in Predicting Soil Erosion After Fire Using the Rangeland Hydrology and Erosion Model

    Science.gov (United States)

    Al-Hamdan, Osama Z.; Pierson, Frederick B.; Nearing, Mark A.; Williams, C. Jason; Hernandez, Mariano; Boll, Jan; Nouwakpo, Sayjro; Weltz, Mark A.; Spaeth, Kenneth E.

    2017-04-01

    The magnitude of erosion from a hillslope is governed by the availability of sediment and connectivity of overland flow and erosion processes. For undisturbed conditions, sediment is mainly detached and transported by rainsplash and sheetflow (splash-sheet) processes in bare batches, but sediment generally only travels a short distance before deposition. On recently disturbed sites (e.g., after fire), bare ground is more extensive and runoff and erosion rates are higher relative to undisturbed conditions. Increased erosion following disturbance occurs largely due to a shift from splash-sheet to concentrated-flow-dominated processes. On long-disturbed sites (e.g., after woody plant encroachment), years of soil loss can limit sediment availability and soil erosion. In contrast, recently burned landscapes typically have ample sediment available and generate high erosion rates. This presentation highlights recent advancements in hillslope erosion prediction by the Rangeland Hydrology and Erosion Model (RHEM) that accommodate recently burned conditions. The RHEM tool is a process-based model that was developed specifically for predicting hillslope runoff and erosion on rangeland ecosystems. The advancements presented here include development of empirical equations to predict erodibility parameters for conditions in which erosion by concentrated flow processes is limited (by runoff or sediment availability) and an erodibility parameter for conditions in which erosion by concentrated flow processes is the dominant erosion mechanism and sediment is amply available (burned conditions). The data used for developing and evaluating the erodibility parameter equations were obtained from rainfall simulation databases maintained by the USDA-Agricultural Research Service. The data span undisturbed, long-disturbed, and recently burned conditions. For undisturbed and long-disturbed conditions, a regression analysis was applied to derive the relationship between splash

  13. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    DYKES, A.A.

    2000-10-11

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

  14. Measurement of erosion: Is it possible?

    NARCIS (Netherlands)

    Stroosnijder, L.

    2005-01-01

    Reasons for erosion measurements are: (1) to determine the environmental impact of erosion and conservation practices, (2) scientific erosion research; (3) development and evaluation of erosion control technology; (4) development of erosion prediction technology and (5) allocation of conservation

  15. Measurement of erosion: Is it possible?

    NARCIS (Netherlands)

    Stroosnijder, L.

    2005-01-01

    Reasons for erosion measurements are: (1) to determine the environmental impact of erosion and conservation practices, (2) scientific erosion research; (3) development and evaluation of erosion control technology; (4) development of erosion prediction technology and (5) allocation of conservation re

  16. Numerical study of solid particle erosion in butterfly valve

    Science.gov (United States)

    Liu, Bo; Zhao, Jiangang; Qian, Jianhua

    2017-07-01

    In the actual operation of butterfly valve, the butterfly valve is found severe erosion wear. A solid particle erosion analysis of butterfly valve based on the erosion theory is researched in this study. A CFD model has been built to simulate the flow erosion. Different parameters of butterfly valve including inlet velocity, particle mass fraction and solid particle diameter are separately analysed. The results show that erosion rate increase with the increase of inlet velocity, particle mass fraction and solid particle diameter. The peak erosion rate is up to 4.63E-5 (kg/m2/s) and erosion of valve disc mainly occurs around the upstream edge and the cylinder face.

  17. Terraced agriculture protects soil from erosion: Case studies in Madagascar

    Science.gov (United States)

    Rabesiranana, Naivo; Rasolonirina, Martin; Fanantenansoa Solonjara, Asivelo; Nomenjanahary Ravoson, Heritiana; Mabit, Lionel

    2016-04-01

    - Soil degradation is a major concern in Madagascar but quantitative information is not widely available. Due to its impact on the sustainability of agricultural production, there is a clear need to acquire data on the extent and magnitude of soil erosion/sedimentation under various agricultural practices in order to promote effective conservation strategies. Caesium-137 and 210Pbex fallout radionuclides (FRNs) possess particular characteristics that make them effective soil tracers for erosion studies. After fallout, 137Cs and 210Pbex are rapidly adsorbed onto fine soil particles. But to date, combined use of these FRNs has never been used to document soil erosion in Madagascar. The study area is located 40 km east of Antananarivo, in Madagascar highlands. Two adjacent cultivated fields have been selected (i.e. a sloped field and a terraced field) as well as an undisturbed reference site in the vicinity of these agricultural fields. Soil samples were collected along downslope transects using motorized corer. The 137Cs and 210Pb gamma analysis were performed at the Institut National des Sciences et Techniques Nucléaires (INSTN-Madagascar) using a high resolution and low background N-type HPGe detector. Results showed that at the terraced field, 137Cs and 210Pbex inventories reached 145 Bq/m2 to 280 Bq/m2 and 2141 Bq/m2 to 4253 Bq/m2, respectively. At the sloped field, the 137Cs and 210Pbex inventories values ranged from 110 Bq/m2 to 280 Bq/m2 and from 2026 Bq/m2 to 4110 Bq/m2, respectively. The net soil erosion determined for the sloped field were 9.6 t/ha/y and 7.2 t/ha/y for 137Cs and 210Pbex methods, respectively. In contrast, at the terraced field, the net soil erosion rates reached only 3.4 t/ha/y and 3.8 t/ha/y, respectively. The preliminary results of this research highlighted that terraced agricultural practice provides an efficient solution to protect soil resources of the Malagasy highlands.

  18. Preliminary analysis of Alvito-Odivelas reservoir system operation under climate change scenarios

    OpenAIRE

    2008-01-01

    The present study provides a preliminary analysis of the impact of climate change on a water resources system of Alentejo region in the South of Portugal. Regional climate model HadRM3P forced by the Global Circulation Model HadAM3P A2 of the Hadley Centre, is used to derive temperature and precipitation data, which in turn is used as input to hydrological model (SHETRAN) for simulation of future streamflow. Dynamic programming based models are used for operation of reservoir system in order ...

  19. Stock assessment of Haliporoides triarthrus (Fam. Solenoceridae) off Mozambique: a preliminary analysis

    OpenAIRE

    Torstensen, E.; Pacule, H.

    1992-01-01

    The pink shrimp, Haliporoides triarthrus, is an important species in the deep-water shrimp fishery in Mozambique. Total catches are in the range of 1,500 to 2,700 tons, with the pink shrimp accounting for 70-90%. Estimates of growth parameters and of natural mortality are used for a preliminary assessment of the fishery, based on length-structured virtual population analysis and yield-per-recruit analyses. With an arbitrarily chosen terminal fishing mortality F, the results indicate a situati...

  20. Preliminary Analysis of Liquid Metal MHD Pressure Drop in the Blanket for the FDS

    Institute of Scientific and Technical Information of China (English)

    王红艳; 吴宜灿; 何晓雄

    2002-01-01

    Preliminary analysis and calculation of liquid metal Li17Pb83 magnetohydrodynamic (MHD) pressure drop in the blanket for the FDS have been presented to evaluate the significance of MHD effects on the thermal-hydraulic design of the blanket. To decrease the liquid metal MHD pressure drop, Al2O3 is applied as an electronically insulated coating onto the inner surface of the ducts. The requirement for the insulated coating to reduce the additional leakage pressure drop caused by coating imperfections has been analyzed. Finally, the total liquid metal MHD pressure drop and magnetic pump power in the FDS blanket have been given.

  1. Preliminary performance analysis of a transverse flow spectrally selective two-slab packed bed volumetric receiver

    CSIR Research Space (South Africa)

    Roos, TH

    2016-05-01

    Full Text Available stream_source_info Roos_2016_ABSTRACT.pdf.txt stream_content_type text/plain stream_size 2694 Content-Encoding UTF-8 stream_name Roos_2016_ABSTRACT.pdf.txt Content-Type text/plain; charset=UTF-8 21st SolarPACES... International Conference (SolarPACES 2015), 13-16 October 2015 Preliminary Performance Analysis of a Transverse Flow Spectrally Selective Two-slab Packed Bed Volumetric Receiver Thomas H. Roos1, a) and Thomas M. Harms2, b) 1Aeronautical Systems...

  2. Preliminary Report: Analysis of the baseline study on the prevalence of Salmonella in laying hen flocks of Gallus gallus

    DEFF Research Database (Denmark)

    Hald, Tine

    This is a preliminary report on the analysis of the Community-wide baseline study to estimate the prevalence of Salmonella in laying hen flocks. It is being published pending the full analysis of the entire dataset from the baseline study. The report contains the elements necessary for the establ......This is a preliminary report on the analysis of the Community-wide baseline study to estimate the prevalence of Salmonella in laying hen flocks. It is being published pending the full analysis of the entire dataset from the baseline study. The report contains the elements necessary...

  3. Pipeline Elbow Erosion Analysis and Optimization Based on the ANSYS%基于ANSYS的输油管道弯头冲蚀分析与优化

    Institute of Scientific and Technical Information of China (English)

    徐磊

    2016-01-01

    在常规输油过程中,油品经过管件弯头部位时速度和压力会有所突变,弯头部件外侧会受到极大的作用力,容易发生冲蚀作用,甚至会造成穿孔、破裂等。利用软件Ansys Workbench 14.0对常规输油管道弯头处进行流固耦合分析,研究了不同流速、弯径比等因素对弯头冲蚀失效的影响。研究结果表明,管道弯头外侧最容易受到冲蚀作用;弯头处的变形损坏受到多因素的影响,适当降低流速、增大弯径比能够有效地缓解冲蚀所引起的破坏;采用盲通管代替弯头也可以大大缓解弯头受到的冲蚀作用。%In the process of conventional oil transportation, the speed and pressure will change suddenly as the oil pass through the pipe elbow,and the elbow part will be in a great pressure, it will be prone to erosion, and even cause perforation, rupture, etc. The fluid structure interaction analysis was carried out on the elbow of conventional oil pipeline through the general calculation software Ansys Workbench14.0 , the effects of different flow velocity and bending radius ratio on the erosion failure of the elbow were analyzed. The results show that: the outside of the pipe elbow is the most vulnerable to be eroded; the deformation and damage of elbow is affected by many factors, reducing the flow rate and increasing the ratio of the bending diameter can effectively alleviate the damage caused by erosion; using blind pipe to replace the elbow can also greatly ease the impact of the elbow.

  4. Do investments in wildfire risk reduction lead to downstream watershed service outcomes? An integrated wildfire-erosion-economic analysis of return on investment from fuel treatments in Colorado

    Science.gov (United States)

    Wilson, C.; Jones, K.; Addington, R.; Cannon, J.; Cheng, T.; Gannon, B.; Kampf, S. K.; Saavedra, F.; Wei, Y.; Wolk, B.

    2016-12-01

    Large, severe wildfires negatively impact forested watersheds in the Western United States and jeopardize critical ecosystem services. Specifically, severe wildfires increase overland flow and runoff that contains sediment and debris, and cause other natural hazards such as floods. High erosion from burned watersheds can fill water supply reservoirs and clog water filtration systems, which has direct costs to water utilities in the form of increased water treatment costs and damage to infrastructure. With increasing wildfire risk due to global climate change and other factors, municipal water providers and users have been investing in management practices to reduce high-severity wildfire risk and increase source water security. In this research we integrate wildfire and erosion prediction models to estimate the return on investment from wildfire fuel treatments in the Upper South Platte watershed, southwest of Denver, Colorado. Denver Water and the U.S. Forest Service created the Forest-To-Faucets Partnership, one of the first payments for watershed services (PWS) programs in the United States. To date they have spent more than $30 million in the Upper South Platte to restore forests and conduct fuel reduction work across landownerships. However, due to the lack of appropriate analytical tools, it is still unclear what returns are being achieved with these investments, aside from the total number of acres treated. In this analysis we consider three treatment scenarios - current fuel treatment investments, a series of investments based on prioritization criteria, and investments based on accessibility - and model potential burn probability, fire severity and erosion. We then estimate the economic benefits of avoiding runoff using past expenditures by Denver Water and compare these to treatment costs. This research directly informs management practices in the Upper South Platte watershed and provides a framework that can inform decisions to optimize location, size

  5. Erosive burning of solid propellants

    Science.gov (United States)

    King, Merrill K.

    1993-01-01

    Presented here is a review of the experimental and modeling work concerning erosive burning of solid propellants (augmentation of burning rate by flow of product gases across a burning surface). A brief introduction describes the motor design problems caused by this phenomenon, particularly for low port/throat area ratio motors and nozzleless motors. Various experimental techniques for measuring crossflow sensitivity of solid propellant burning rates are described, with the conclusion that accurate simulation of the flow, including upstream flow development, in actual motors is important since the degree of erosive burning depends not only on local mean crossflow velocity and propellant nature, but also upon this upstream development. In the modeling area, a brief review of simplified models and correlating equations is presented, followed by a description of more complex numerical analysis models. Both composite and double-base propellant models are reviewed. A second generation composite model is shown to give good agreement with data obtained in a series of tests in which composite propellant composition and heterogeneity (particle size distribution) were systematically varied. Finally, the use of numerical models for the development of erosive burning correlations is described, and a brief discussion of scaling is presented.

  6. Coastal Erosion Control Methods

    Science.gov (United States)

    Greene, V.

    2016-12-01

    Coastal erosion is bad because the ecosystem there will be washed away and the animals could drown or be displaced and have to adapt to a new ecosystem that they are not prepared for. I'm interested in this problem because if there aren't beaches when I grow up I won't be able to do the things I would really like to do. I would like to be a marine biologist. Secondly, I don't want to see beach houses washed away. I would like to see people live in harmony with their environment. So, to study ways in which to preserve beaches I will make and use models that test different erosion controls. Two different ideas for erosion control I tested are using seaweed or a rock berm. I think the rock berm will work better than the model of seaweed because the seaweed is under water and the waves can carry the sand over the seaweed, and the rock berm will work better because the rocks will help break the waves up before they reach the shore and the waves can not carry the sand over the rocks that are above the water. To investigate this I got a container to use to model the Gulf of Mexico coastline. I performed several test runs using sand and water in the container to mimic the beach and waves from the Gulf of Mexico hitting the shoreline. I did three trials for the control (no erosion control), seaweed and a rock berm. Rock berms are a border of a raised area of rock. The model for seaweed that I used was plastic shopping bags cut into strips and glued to the bottom of my container to mimic seaweed. My results were that the control had the most erosion which ranged from 2.75 - 3 inches over 3 trials. The seaweed was a little better than the control but was very variable and ranged from 1.5 - 3 inches over 3 trials. The rock berm worked the best out of all at controlling erosion with erosion ranging from 1.5 - 2 inches. My hypothesis was correct because the rock berm did best to control erosion compared to the control which had no erosion control and the model with seaweed.

  7. Head-to-head comparison of H2-receptor antagonists and proton pump inhibitors in the treatment of erosive esophagitis: A meta-analysis

    Institute of Scientific and Technical Information of China (English)

    Wei-Hong Wang; Jia-Qing Huang; Ge-Fan Zheng; Harry Hua-Xiang Xia; Wai-Man Wong; Shiu-Kum Lam; Benjamin Chun-Yu Wong

    2005-01-01

    AIM: To systematically evaluate the efficacy of H2-receptor antagonists (H2RAs) and proton pump inhibitors in healing erosive esophagitis (EE).METHODS: A meta-analysis was performed. A literature search was conducted in PubMed, Medline, Embase, and Cochrane databases to include randomized controlled head-to-head comparative trials evaluating the efficacy of H2RAs or proton pump inhibitors in healing EE. Relative risk (RR) and 95% confidence interval (CI) were calculated under a random-effects model.RESULTS: RRs of cumulative healing rates for each comparison at 8 wk were: high dose vs standard dose H2RAs,1.17 (95%CI, 1.02-1.33); standard dose proton pump inhibitors vsstandard dose H2RAs, 1.59 (95%CI, 1.44-1.75);standard dose other proton pump inhibitors vs standard dose omeprazole, 1.06 (95%CI, 0.98-1.06). Proton pump inhibitors produced consistently greater healing rates than H2RAs of all doses across all grades of esophagitis, including patients refractory to H2RAs. Healing rates achieved with standard dose omeprazole were similar to those with other proton pump inhibitors in all grades of esophagitis.CONCLUSION: H2RAS are less effective for treating patients with erosive esophagitis, especially in those with severe forms of esophagitis. Standard dose proton pump inhibitors are significantly more effective than H2RAs in healing esophagitis of all grades. Proton pump inhibitors given at the recommended dose are equally effective for healing esophagitis.

  8. Preliminary phytochemical screening, Antibacterial potential and GC-MS analysis of two medicinal plant extracts.

    Science.gov (United States)

    Vijayaram, Seerangaraj; Kannan, Suruli; Saravanan, Konda Mani; Vasantharaj, Seerangaraj; Sathiyavimal, Selvam; P, Palanisamy Senthilkumar

    2016-05-01

    The presence study was aimed to catalyze the primary metabolites and their confirmation by using GC-MS analysis and antibacterial potential of leaf extract of two important medicinal plant viz., Eucalyptus and Azadirachta indica. The antibacterial potential of the methanol leaf extract of the studied species was tested against Escherichia coli, Pseudomonas aeruginosa, Klebsiellap neumoniae, Streptococcus pyogens, Staphylococcus aureus using by agar well diffusion method. The higher zone of inhibition (16mm) was observed against the bacterium Pseudomonas aeruginosa at 100μl concentration of methanol leaf extract. Preliminary phytochemical analysis of studied species shows that presence of phytochemical compounds like steroids, phenolic compounds and flavonoids. GC-MS analysis confirms the occurrence of 20 different compounds in the methanol leaf extract of the both studied species.

  9. 1972 preliminary safety analysis report based on a conceptual design of a proposed repository in Kansas

    Energy Technology Data Exchange (ETDEWEB)

    Blomeke, J.O.

    1977-08-01

    This preliminary safety analysis report is based on a proposed Federal Repository at Lyons, Kansas, for receiving, handling, and depositing radioactive solid wastes in bedded salt during the remainder of this century. The safety analysis applies to a hypothetical site in central Kansas identical to the Lyons site, except that it is free of nearby salt solution-mining operations and bore holes that cannot be plugged to Repository specifications. This PSAR contains much information that also appears in the conceptual design report. Much of the geological-hydrological information was gathered in the Lyons area. This report is organized in 16 sections: considerations leading to the proposed Repository, design requirements and criteria, a description of the Lyons site and its environs, land improvements, support facilities, utilities, different impacts of Repository operations, safety analysis, design confirmation program, operational management, requirements for eventually decommissioning the facility, design criteria for protection from severe natural events, and the proposed program of experimental investigations. (DLC)

  10. Preliminary Cluster Analysis For Several Representatives Of Genus Kerivoula (Chiroptera: Vespertilionidae) in Borneo

    Science.gov (United States)

    Hasan, Noor Haliza; Abdullah, M. T.

    2008-01-01

    The aim of the study is to use cluster analysis on morphometric parameters within the genus Kerivoula to produce a dendrogram and to determine the suitability of this method to describe the relationship among species within this genus. A total of 15 adult male individuals from genus Kerivoula taken from sampling trips around Borneo and specimens kept at the zoological museum of Universiti Malaysia Sarawak were examined. A total of 27 characters using dental, skull and external body measurements were recorded. Clustering analysis illustrated the grouping and morphometric relationships between the species of this genus. It has clearly separated each species from each other despite the overlapping of measurements of some species within the genus. Cluster analysis provides an alternative approach to make a preliminary identification of a species.

  11. Preliminary Research on Risk Evaluation of Gully Erosion in Typical Black Soil Area of Northeast China%东北典型黑土区沟蚀发生风险评价研究

    Institute of Scientific and Technical Information of China (English)

    王文娟; 邓荣鑫; 张树文

    2014-01-01

    选择黑龙江省乌裕尔河和讷谟尔河两流域所涉及的东北典型黑土区作为研究区,以SPOT 5影像为基础数据源,获取了研究区2005年的侵蚀沟分布数据,并且利用该数据对研究区沟蚀现状进行了评估.同时基于1:50 000地形图数据插值求取的DEM,提取了与沟蚀形成相关的11个地形因子.最后基于沟蚀数据和无共线性的8个地形因子构建了Logistic模型,据此模型对研究区沟蚀发生风险进行了评价,进而进行了沟蚀发生风险分级评价研究.结果表明研究区当前侵蚀沟共有14 184条,密度为322.11m/km2,吞噬耕地约100.36 km2;基于Logistic模型获取的沟蚀发生风险空间分布图与研究区沟蚀分布现状较为吻合,以0.4分界时,研究区73%的侵蚀沟都发生在具有高危发生风险地区,评价结果能够反映研究区的沟蚀发生风险分布状况;通过风险分级图表可以评估研究区不同发生风险等级的沟蚀分布面积、分布特征和空间分布格局,便于管理者找出较为严重的侵蚀区,为有针对性地进行沟蚀防治提供依据.%Black soil area of Northeast China is one of the most important marketable grain bases in China,but serious soil loss resulted in crucial challenge to the marketable grain production.This paper,supported by Remote Sensing and Geographic Information System,chose typical black soil area of Northeast China which is located in the scope of Wuyuer and Nemoer river basins as a study case and took SPOT 5 as data source,obtained gully distribution data in 2005.Based on the gully distribution data,the gully erosion status of the study area was evaluated.Using 1:50000 relief maps as data source,DEM was obtained by interpolation and then 11 topographic factors related with the gully formation were extracted.Based on gully data and eight no multi-colinearity topographic factors,the Logistic regression model was built.With the model,the risk of the gully erosion was evaluated

  12. Splash erosion. A bibliometric Review

    Science.gov (United States)

    Fernández Raga, M. B.

    2012-04-01

    Ellison (1944) developed the splash board as a system for measuring splash erosion that was both cheap and reliable. Bollinne (1975), Morgan (1978, 1981). Mutchler (1967) described another different type of splash detectors according to whether they were passive or could register data. In the study mentioned above these authors included bottles, funnels, glasses, photography, markers. After that several devices has been made up like the splash sampler (Leguedois et al., 2005), soil tray (Van Dijk et al., 2002), splash funnel (Terry, 1989) and several rain cups (Fernandez-Raga et al., 2010; Molina and Llinares, 1996; Torri et al., 1987). Splash erosion research has materialized in the form of a number of papers published in international journals. The database of bibliographic references employed has been one of the most prestigious ones: theWeb of Science (ISI). The search was carried out on January 27th 2012. Among the 3x10^8 scholarly documents included in the Science Citation Index Expanded (SCI-EXPANDED) 1899 to present , the searching engine located 439 containing the word "splash erosion*", where the asterisk acts as a wildcard for any letter or group of letters. Of these, 383 were classified as articles, 87 as proceeding papers, 5 as editorial material, 2 as notes and 1 as correction. These documents have been published in 163 different journals, although four are particularly recurrent: Earth surface processes and Landforms, Catena, Soil Science Society of America Journal and Hydrological processes, with 41, 35, 35 and 26 published documents respectively. A geographic analysis of these articles has been carried out in an attempt to determine in what parts of the world research projects were making use of splash erosion. The results are that anglo-saxon countries, as USA, England and Australia dominate, particularly USA, with 130 articles. China and Japan are large communities of researches too, and some Central European countries as Belgium, France Germany

  13. When erosion ruins the chronology

    Science.gov (United States)

    Wolters, Steffen; Enters, Dirk; Blume, Katharina; Lücke, Andreas

    2016-04-01

    Human land-use has considerably shaped the landscape of north-western Germany over the past millennia. Deforestation and agriculture created a predominantly open scenery preserved until today with only a few remnants of former landscape elements such as woodlands, peat bogs, heath lands and lakes. Here we present a multi-proxy approach including sedimentological and geochemical parameters (e. g. element concentrations and stable isotopes) as well as biological proxies (pollen, macro fossils and diatoms) combined with an archaeological site analysis to investigate the effects of prehistoric land-use on lake systems and their catchment areas with a special focus on changes of the water quality, e. g. eutrophication and acidification and its natural regeneration during phases of weaker land-use impact. The study reveals a millenia-long history of erosion processes caused by successive selective woodland clearances starting in Neolithic Times. The geochemical evidence of soil erosion is recorded by distinct peaks of the terrigenic elements K and Ti. However, due to (1) the low sensitivy of the XRF scanner for Si and (2) the prevalence of diatom related biogenic silicon XRF-scanning of highly organic lake sediments fails to reflect the actual sand input caused by erosion. Particularly single quartz grains are not detected in the organic sediment matrix. Therefore we make successful use of mineral grain analysis which previously has only been applied to record aeolian input in bogs. K and Ti concentrations are not correlated with the content of mineral grains which suggest two different erosion processes. Our efforts to construct robust age-depth relationships based on AMS 14C-dates of terrestrial plant macrofossils reveal a specific dating issue of northwest German lakes. Especially in younger sediments we observe 14C-dates which are on the one hand too old and on the other hand among themselves roughly contemporaneous. We explain this feature with the extensive bog

  14. Impacts of climate change on erosion in humid and dry Mediterranean regions of Portugal

    Science.gov (United States)

    Nunes, João Pedro; Marisa Santos, Juliana; Sampaio, Elsa; Corte-Real, João; Moreira, Madalena; Jacinto, Rita; Bernard-Jannin, Léonard

    2014-05-01

    Soils in the Mediterranean regions of Europe are often vulnerable to soil erosion, due to a combination of annual plant cover cycles, centuries of human use, the concentration of rainstorms in a short period of the year, and other factors. Climate change could bring about a warmer and drier climate, limiting vegetation growth while bringing heavier storms during winter. This could eventually lead to higher risks of soil losses and the consequential problems of land degradation and desertification. Project ERLAND, which began in 2009, is assessing these risks for two Mediterranean research catchments in Portugal, with four main goals: (i) collect data to understand hydrological and erosion processes in representative catchments; (ii) use this data to parameterize the SWAT eco-hydrological and erosion model as accurately as possible; (iii) use future socio-economic scenarios to estimate both impacts on climate change and on future land-use practices; and (iv) apply the SWAT model for these scenarios and estimate the consequences for soil erosion rates. The Macieira catchment is in a wet Mediterranean climate region, with high rainfall (c. 1300 mm.y-1) but a distinct summer dry season; erosion processes are associated with periods of sparse cover in autumn in fields with a pasture-corn rotation, but also with forest plantations after clear-cutting and especially after forest fires. The occurrence of a forest fire inside the catchment in 2011 allowed an analysis of the role played by this kind of disturbances on soil erosion. Climate change could bring less erosive rainfall events, but an increase in fire frequency, and therefore a potential shift of erosion from agriculture to forest land-uses. The Guadalupe catchment has a dry Mediterranean climate (rainfall of c. 550 mm.y-1); erosion processes occur mostly in permanent crops (olive trees) and winter cereal fields. Climate change could bring a concentration of rainfall in winter, as well as an increase in the area

  15. Comparing global-scale topographic and climatic metrics to long-term erosion rates using ArcSwath, an efficient new ArcGIS tool for swath profile analysis

    Science.gov (United States)

    Blomqvist, Niclas; Whipp, David

    2016-04-01

    The topography of the Earth's surface is the result of the interaction of tectonics, erosion and climate. Thus, topography should contain a record of these processes that can be extracted by topographic analysis. The question considered in this study is whether the spatial variations in erosion that have sculpted the modern topography are representative of the long-term erosion rates in mountainous regions. We compare long-term erosion rates derived from low-temperature thermochronometry to erosional proxies calculated from topographic and climatic data analysis. The study has been performed on a global scale including six orogens: The Himalaya, Andes, Taiwan, Olympic Mountains, Southern Alps in New Zealand and European Alps. The data was analyzed using a new swath profile analysis tool for ArcGIS called ArcSwath (https://github.com/HUGG/ArcSwath) to determine the correlations between the long-term erosion rates and modern elevations, slope angles, relief in 2.5-km- and 5-km-diameter circles, erosion potential, normalized channel steepness index ksn, and annual rainfall. ArcSwath uses a Python script that has been incorporated into an ArcMap 10.2 add-in tool, extracting swath profiles in about ten seconds compared to earlier workflows that could take more than an hour. In ArcMap, UTM-projected point or raster files can be used for creating swath profiles. Point data are projected onto the swath and the statistical parameters (minimum, mean and maximum of the values across the swath) are calculated for the raster data. Both can be immediately plotted using the Python matplotlib library, or plotted externally using the csv-file that is produced by ArcSwath. When raster and point data are plotted together, it is easier to make comparisons and see correlations between the selected data. An unambiguous correlation between the topographic or climatic metrics and long-term erosion rates was not found. Fitting of linear regression lines to the topographic/ climatic metric

  16. The purification, crystallization and preliminary X-ray diffraction analysis of dihydrodipicolinate synthase from Clostridium botulinum

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, Renwick C. J., E-mail: rdobson@unimelb.edu.au; Atkinson, Sarah C. [Department of Biochemistry and Molecular Biology, University of Melbourne, Parkville, Victoria 3010 (Australia); Bio21 Molecular Science and Biotechnology Institute, 30 Flemington Road, University of Melbourne, Parkville, Victoria 3010 (Australia); Gorman, Michael A. [St Vincents Institute, 9 Princes Street, Fitzroy, Victoria 3065 (Australia); Newman, Janet M. [CSIRO Division of Molecular and Health Technologies, 343 Royal Parade, Parkville, Victoria 3052 (Australia); Parker, Michael W. [Department of Biochemistry and Molecular Biology, University of Melbourne, Parkville, Victoria 3010 (Australia); Bio21 Molecular Science and Biotechnology Institute, 30 Flemington Road, University of Melbourne, Parkville, Victoria 3010 (Australia); St Vincents Institute, 9 Princes Street, Fitzroy, Victoria 3065 (Australia); Perugini, Matthew A. [Department of Biochemistry and Molecular Biology, University of Melbourne, Parkville, Victoria 3010 (Australia); Bio21 Molecular Science and Biotechnology Institute, 30 Flemington Road, University of Melbourne, Parkville, Victoria 3010 (Australia)

    2008-03-01

    Dihydrodipicolinate synthase (DHDPS), an enzyme in the lysine-biosynthetic pathway, is a promising target for antibiotic development against pathogenic bacteria. Here, the expression, purification, crystallization and preliminary diffraction analysis of DHDPS from C. botulinum are reported. In recent years, dihydrodipicolinate synthase (DHDPS; EC 4.2.1.52) has received considerable attention from both mechanistic and structural viewpoints. This enzyme, which is part of the diaminopimelate pathway leading to lysine, couples (S)-aspartate-β-semialdehyde with pyruvate via a Schiff base to a conserved active-site lysine. In this paper, the expression, purification, crystallization and preliminary X-ray diffraction analysis of DHDPS from Clostridium botulinum, an important bacterial pathogen, are presented. The enzyme was crystallized in a number of forms, predominantly using PEG precipitants, with the best crystal diffracting to beyond 1.9 Å resolution and displaying P4{sub 2}2{sub 1}2 symmetry. The unit-cell parameters were a = b = 92.9, c = 60.4 Å. The crystal volume per protein weight (V{sub M}) was 2.07 Å{sup 3} Da{sup −1}, with an estimated solvent content of 41%. The structure of the enzyme will help guide the design of novel therapeutics against the C. botulinum pathogen.

  17. A Preliminary Analysis of Reactor Performance Test (LOEP) for a Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeonil; Park, Su-Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The final phase of commissioning is reactor performance test, which is to prove the integrated performance and safety of the research reactor at full power with fuel loaded such as neutron power calibration, Control Absorber Rod/Second Shutdown Rod drop time, InC function test, Criticality, Rod worth, Core heat removal with natural mechanism, and so forth. The last test will be safety-related one to assure the result of the safety analysis of the research reactor is marginal enough to be sure about the nuclear safety by showing the reactor satisfies the acceptance criteria of the safety functions such as for reactivity control, maintenance of auxiliaries, reactor pool water inventory control, core heat removal, and confinement isolation. After all, the fuel integrity will be ensured by verifying there is no meaningful change in the radiation levels. To confirm the performance of safety equipment, loss of normal electric power (LOEP), possibly categorized as Anticipated Operational Occurrence (AOO), is selected as a key experiment to figure out how safe the research reactor is before turning over the research reactor to the owner. This paper presents a preliminary analysis of the reactor performance test (LOEP) for a research reactor. The results showed how different the transient between conservative estimate and best estimate will look. Preliminary analyses have shown all probable thermal-hydraulic transient behavior of importance as to opening of flap valve, minimum critical heat flux ratio, the change of flow direction, and important values of thermal-hydraulic parameters.

  18. Preliminary design and thermal analysis of device for finish cooling Jaffa biscuits in a.d. 'Jaffa'- Crvenka

    Directory of Open Access Journals (Sweden)

    Salemović Duško R.

    2015-01-01

    Full Text Available In this paper preliminary design of device for finish cooling chocolate topping of biscuits in A.D. 'Jaffa'- Crvenka was done. The proposed preliminary design followed by the required technological process of finish cooling biscuits and required parameters of process which was supposed to get and which represented part of project task. Thermal analysis was made and obtained percentage error between surface contact of the air and chocolate topping, obtained from heat balance and geometrical over proposed preliminary design, wasn't more than 0.67%. This is a preliminary design completely justified because using required length of belt conveyor receive required temperature of chocolate topping at the end of the cooling process.

  19. Mini-DIAL system measurements coupled with multivariate data analysis to identify TIC and TIM simulants: preliminary absorption database analysis.

    Science.gov (United States)

    Gaudio, P.; Malizia, A.; Gelfusa, M.; Martinelli, E.; Di Natale, C.; Poggi, L. A.; Bellecci, C.

    2017-01-01

    Nowadays Toxic Industrial Components (TICs) and Toxic Industrial Materials (TIMs) are one of the most dangerous and diffuse vehicle of contamination in urban and industrial areas. The academic world together with the industrial and military one are working on innovative solutions to monitor the diffusion in atmosphere of such pollutants. In this phase the most common commercial sensors are based on “point detection” technology but it is clear that such instruments cannot satisfy the needs of the smart cities. The new challenge is developing stand-off systems to continuously monitor the atmosphere. Quantum Electronics and Plasma Physics (QEP) research group has a long experience in laser system development and has built two demonstrators based on DIAL (Differential Absorption of Light) technology could be able to identify chemical agents in atmosphere. In this work the authors will present one of those DIAL system, the miniaturized one, together with the preliminary results of an experimental campaign conducted on TICs and TIMs simulants in cell with aim of use the absorption database for the further atmospheric an analysis using the same DIAL system. The experimental results are analysed with standard multivariate data analysis technique as Principal Component Analysis (PCA) to develop a classification model aimed at identifying organic chemical compound in atmosphere. The preliminary results of absorption coefficients of some chemical compound are shown together pre PCA analysis.

  20. Preliminary Nuclear Analysis for the HANARO Fuel Element with Burnable Absorber

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Chul Gyo; Kim, So Young; In, Won Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    Burnable absorber is used for reducing reactivity swing and power peaking in high performance research reactors. Development of the HANARO fuel element with burnable absorber was started in the U-Mo fuel development program at HANARO, but detailed full core analysis was not performed because the current HANARO fuel management system is uncertain to analysis the HANARO core with burnable absorber. A sophisticated reactor physics system is required to analysis the core. The McCARD code was selected and the detailed McCARD core models, in which the basic HANARO core model was developed by one of the McCARD developers, are used in this study. The development of nuclear fuel requires a long time and correct developing direction especially by the nuclear analysis. This paper presents a preliminary nuclear analysis to promote the fuel development. Based on the developed fuel, the further nuclear analysis will improve reactor performance and safety. Basic nuclear analysis for the HANARO and the AHR were performed for getting the proper fuel elements with burnable absorber. Addition of 0.3 - 0.4% Cd to the fuel meat is promising for the current HANARO fuel element. Small addition of burnable absorber may not change any fuel characteristics of the HANARO fuel element, but various basic tests and irradiation tests at the HANARO core are required.

  1. Treatment by gliding arc of epoxy resin: preliminary analysis of surface modifications

    Science.gov (United States)

    Faubert, F.; Wartel, M.; Pellerin, N.; Pellerin, S.; Cochet, V.; Regnier, E.; Hnatiuc, B.

    2016-12-01

    Treatments with atmospheric pressure non-thermal plasma are easy to implement and inexpensive. Among them gliding arc (GlidArc) remains rarely used in surface treatment of polymers. However, it offers economic and flexible way to treat quickly large areas. In addition the choice of carrier gas makes it possible to bring the active species and other radicals allowing different types of grafting and functionalization of the treated surfaces, for example in order to apply for anti-biofouling prevention. This preliminary work includes analysis of the surface of epoxy resins by infrared spectroscopy: the different affected chemical bonds were studied depending on the duration of treatment. The degree of oxidation (the C/O ratio) is obtained by X-ray microanalysis and contact angle analysis have been performed to determinate the wettability properties of the treated surface. A spectroscopic study of the plasma allows to determine the possible active species in the different zones of the discharge.

  2. Los Alamos National Laboratory corregated metal pipe saw facility preliminary safety analysis report. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-09-19

    This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

  3. Preliminary Uncertainty Analysis for SMART Digital Core Protection and Monitoring System

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Bon Seung; In, Wang Kee; Hwang, Dae Hyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    The Korea Atomic Energy Research Institute (KAERI) developed on-line digital core protection and monitoring systems, called SCOPS and SCOMS as a part of SMART plant protection and monitoring system. SCOPS simplified the protection system by directly connecting the four RSPT signals to each core protection channel and eliminated the control element assembly calculator (CEAC) hardware. SCOMS adopted DPCM3D method in synthesizing core power distribution instead of Fourier expansion method being used in conventional PWRs. The DPCM3D method produces a synthetic 3-D power distribution by coupling a neutronics code and measured in-core detector signals. The overall uncertainty analysis methodology which is used statistically combining uncertainty components of SMART core protection and monitoring system was developed. In this paper, preliminary overall uncertainty factors for SCOPS/SCOMS of SMART initial core were evaluated by applying newly developed uncertainty analysis method

  4. Preliminary cladistic analysis of genera of the cestode order Trypanorhyncha Diesing, 1863.

    Science.gov (United States)

    Beveridge, I; Campbell, R A; Palm, H W

    1999-01-01

    A preliminary cladistic analysis was carried out on the 49 currently recognised genera of the order Trypanorhyncha. Forty-four characters were analysed; a functional outgroup was used for scolex and strobilar characters, while Nybelinia was utilised to polarise characters related to the rhyncheal system. Eight well-resolved clades were evident in the resultant cladogram, which is compared with existing phenetic classifications. An analysis of families resulted in a similar clustering of taxa to that observed in the case of the genera. The results suggest that two key characters used in existing classifications, namely the presence of sensory fossettes on the bothridia and the development of atypical heteroacanth and poeciloacanth armatures from typical heteroacanth armatures, have occurred on several occasions. Some clades provide support for the arrangements used in current classifications. Suggestions are made for future avenues of research which might provide more robust phylogenetic data for the Trypanorhyncha.

  5. Preliminary Evaluation of MapReduce for High-Performance Climate Data Analysis

    Science.gov (United States)

    Duffy, Daniel Q.; Schnase, John L.; Thompson, John H.; Freeman, Shawn M.; Clune, Thomas L.

    2012-01-01

    MapReduce is an approach to high-performance analytics that may be useful to data intensive problems in climate research. It offers an analysis paradigm that uses clusters of computers and combines distributed storage of large data sets with parallel computation. We are particularly interested in the potential of MapReduce to speed up basic operations common to a wide range of analyses. In order to evaluate this potential, we are prototyping a series of canonical MapReduce operations over a test suite of observational and climate simulation datasets. Our initial focus has been on averaging operations over arbitrary spatial and temporal extents within Modern Era Retrospective- Analysis for Research and Applications (MERRA) data. Preliminary results suggest this approach can improve efficiencies within data intensive analytic workflows.

  6. Dimensions of Human-Work Domain Interaction: A Preliminary Analysis for the Design of a Corporate Digital Library.

    Science.gov (United States)

    Xie, Hong

    2003-01-01

    Applies the cognitive system engineering approach to investigate human-work interaction at a corporate setting. Reports preliminary analysis of data collected from diary analysis and interview of 20 subjects. Results identify three dimensions for each of four interactive activities involved in human-work interaction and their relationships.…

  7. Clinical studies of dental erosion and erosive wear

    National Research Council Canada - National Science Library

    Huysmans, M.C.D.N.J.M; Chew, H.P; Ellwood, R.P

    2011-01-01

    We define erosion as a partial demineralisation of enamel or dentine by intrinsic or extrinsic acids and erosive tooth wear as the accelerated loss of dental hard tissue through the combined effect...

  8. Bentonite erosion. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Birgersson, Martin; Boergesson, Lennart; Hedstroem, Magnus; Karnland, Ola; Nilsson, Ulf (Clay Technology AB, Lund (Sweden))

    2009-12-15

    Low saline water may reach KBS-3 repository depth, e.g. during periods of glaciation. Under such aqueous conditions, the montmorillonite part of the bentonite buffer might transform into a sol and thereby be transported away with flowing water in fractures. The primary aim with this report is to improve the understanding of the basic principles for this possible montmorillonite particle release. The report includes experimental and theoretical work performed at Clay Technology. Natural bentonite and ion-exchanged purified montmorillonite from three different geographical origins, Wyoming (U.S.), Milos (Greece) and Kutch (India) have been studied. Experimental and/or theoretical investigations have been performed with respect to: - Free swelling ability; - Rheological properties; - Rate of bentonite loss into fractures; - Filtering; - Ion exchange; - Sol formation ability; - Ion diffusion; - Mass loss due to erosion. The performed erosion experiments show that erosion does not occur in a mixed calcium/sodium montmorillonite with at least 20% calcium in exchange positions, when the external solution contains above 4 mM charge equivalents. This result is in agreement with the presented conceptual view of sol formation and measured equilibrium properties in mixed calcium/sodium montmorillonite. The findings imply that the buffer will be stable for non-glacial conditions. However, erosion due to sol formation cannot be ruled out for glacial conditions.

  9. SEDIMENTATION AND EROSION STUDIES

    Institute of Scientific and Technical Information of China (English)

    Chih Ted YANG

    2005-01-01

    @@ The river systems observed today is the cumulative result of surface, rill, and gully erosion, and sediment transport, scour, and deposition. The divisions of approach between these two related areas are man-made, and are not based on sound science. Most of the erosion studies are done by geologists and agricultural engineers who are concerned of the surface, rill, and gully erosion and the loss of agricultural land productivity. Hydraulic engineers are more interested in the study of sediment transport, scour, and deposition, and their impacts on river engineering and hydraulic structures in rivers and reservoirs. Erosion studies are often based on empirical relationships or field data to determinate the annual sediment yield from a watershed. On the other hand, hydraulic engineers focus their attention on solving equations based on assumed initial and boundary conditions with a time scale of days, hours, or seconds. Both approaches have their complementary strengths and weaknesses. It is important to provide a forum for specialists in both areas to communicate, exchange ideas, and learn from each other.

  10. Erosion of dust aggregates

    CERN Document Server

    Seizinger, Alexander; Kley, Wilhelm

    2013-01-01

    Aims: The aim of this work is to gain a deeper insight into how much different aggregate types are affected by erosion. Especially, it is important to study the influence of the velocity of the impacting projectiles. We also want to provide models for dust growth in protoplanetary disks with simple recipes to account for erosion effects. Methods: To study the erosion of dust aggregates we employed a molecular dynamics approach that features a detailed micro-physical model of the interaction of spherical grains. For the first time, the model has been extended by introducing a new visco-elastic damping force which requires a proper calibration. Afterwards, different sample generation methods were used to cover a wide range of aggregate types. Results: The visco-elastic damping force introduced in this work turns out to be crucial to reproduce results obtained from laboratory experiments. After proper calibration, we find that erosion occurs for impact velocities of 5 m/s and above. Though fractal aggregates as ...

  11. Dune erosion above revetments

    NARCIS (Netherlands)

    Van Thiel de Vries, J.S.M.

    2012-01-01

    In a situation with a narrow dune, the dune base can be protected with a revetment to reduce dune erosion during extreme events. To quantify the effects of a revetment on storm impact, the functionality of the numerical storm impact model XBeach (Roelvink et al., 2009) is extended to account for the

  12. Preliminary failure modes and effects analysis on Korean HCCR TBS to be tested in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Mu-Young, E-mail: myahn74@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of); Jin, Hyung Gon; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Yi-Hyun; Lee, Youngmin [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    Highlights: • Postulated initiating events are identified through failure modes and effects analysis on the current HCCR TBS design. • A set of postulated initiating events are selected for consideration of deterministic analysis. • Accident evolutions on the selected postualted initiating events are qualitatively described for deterministic analysis. - Abstract: Korean Helium cooled ceramic reflector (HCCR) Test blanket system (TBS), which comprises Test blanket module (TBM) and ancillary systems in various locations of ITER building, is operated at high temperature and pressure with decay heat. Therefore, safety is utmost concern in design process and it is required to demonstrate that the HCCR TBS is designed to comply with the safety requirements and guidelines of ITER. Due to complexity of the system with many interfaces with ITER, a systematic approach is necessary for safety analysis. This paper presents preliminary failure modes and effects analysis (FMEA) study performed for the HCCR TBS. FMEA is a systematic methodology in which failure modes for components in the system and their consequences are studied from the bottom-up. Over eighty failure modes have been investigated on the HCCR TBS. The failure modes that have similar consequences are grouped as postulated initiating events (PIEs) and total seven reference accident scenarios are derived from FMEA study for deterministic accident analysis. Failure modes not covered here due to evolving design of the HCCR TBS and uncertainty in maintenance procedures will be studied further in near future.

  13. Expression, purification, crystallization and preliminary crystallographic analysis of the proliferation-associated protein Ebp1

    Energy Technology Data Exchange (ETDEWEB)

    Kowalinski, Eva; Bange, Gert; Wild, Klemens; Sinning, Irmgard, E-mail: irmi.sinning@bzh.uni-heidelberg.de [Heidelberg University Biochemistry Center, INF 328, D-69120 Heidelberg (Germany)

    2007-09-01

    Preliminary X-ray analysis of the proliferation-associated protein Ebp1 from Homo sapiens is provided. ErbB-3-binding protein 1 (Ebp1) is a member of the family of proliferation-associated 2G4 proteins (PA2G4s) and plays a role in cellular growth and differentiation. Ligand-induced activation of the transmembrane receptor ErbB3 leads to dissociation of Ebp1 from the receptor in a phosphorylation-dependent manner. The non-associated protein is involved in transcriptional and translational regulation in the cell. Here, the overexpression, purification, crystallization and preliminary crystallographic studies of Ebp1 from Homo sapiens are reported. Initially observed crystals were improved by serial seeding to single crystals suitable for data collection. The optimized crystals belong to the tetragonal space group P4{sub 1}2{sub 1}2 or P4{sub 3}2{sub 1}2 and diffracted to a resolution of 1.6 Å.

  14. Erosion by an Alpine glacier.

    Science.gov (United States)

    Herman, Frédéric; Beyssac, Olivier; Brughelli, Mattia; Lane, Stuart N; Leprince, Sébastien; Adatte, Thierry; Lin, Jiao Y Y; Avouac, Jean-Philippe; Cox, Simon C

    2015-10-09

    Assessing the impact of glaciation on Earth's surface requires understanding glacial erosion processes. Developing erosion theories is challenging because of the complex nature of the erosion processes and the difficulty of examining the ice/bedrock interface of contemporary glaciers. We demonstrate that the glacial erosion rate is proportional to the ice-sliding velocity squared, by quantifying spatial variations in ice-sliding velocity and the erosion rate of a fast-flowing Alpine glacier. The nonlinear behavior implies a high erosion sensitivity to small variations in topographic slope and precipitation. A nonlinear rate law suggests that abrasion may dominate over other erosion processes in fast-flowing glaciers. It may also explain the wide range of observed glacial erosion rates and, in part, the impact of glaciation on mountainous landscapes during the past few million years. Copyright © 2015, American Association for the Advancement of Science.

  15. Severe Environmental Corrosion Erosion Facility

    Data.gov (United States)

    Federal Laboratory Consortium — NETL’s Severe Environment Corrosion Erosion Facility in Albany, OR, allows researchers to safely examine the performance of materials in highly corrosive or erosive...

  16. A diffuser heat transfer and erosion code

    Science.gov (United States)

    Buzzard, G. H.

    1985-10-01

    A computer code for diffuser heat transfer and erosion analysis (DHTE) has been developed which improves upon the earlier Rocket Engine Diffuser Thermal Analysis Program (REDTAP). Improvements contained within DHTE include provision for a radial temperature gradient within the diffuser wall, an improved model for the particle impingement accommodation coefficient, a model for particle debris shielding, and a model for wall erosion by particle impact. DHTE differs from an earlier diffuser heat transfer code (DHT) to the extent that it incorporates a simple erosion model and utilizes a more recent diffuser version of the JANNAF Standardized Plume Flow Field Model (SCP2ND). The 77-inch diffuser was instrumented to record the water side wall temperature and water jacket temperature at selected sites along the initial seven feet of the diffuser during routine test firings. Data is presented that supports the predictions of DHTE but is inadequate to validate the code.

  17. An empirical approach to estimate soil erosion risk in Spain.

    Science.gov (United States)

    Martín-Fernández, Luis; Martínez-Núñez, Margarita

    2011-08-01

    Soil erosion is one of the most important factors in land degradation and influences desertification worldwide. In 2001, the Spanish Ministry of the Environment launched the 'National Inventory of Soil Erosion (INES) 2002-2012' to study the process of soil erosion in Spain. The aim of the current article is to assess the usefulness of this National Inventory as an instrument of control, measurement and monitoring of soil erosion in Spain. The methodology and main features of this National Inventory are described in detail. The results achieved as of the end of May 2010 are presented, together with an explanation of the utility of the Inventory as a tool for planning forest hydrologic restoration, soil protection, erosion control, and protection against desertification. Finally, the authors make a comparative analysis of similar initiatives for assessing soil erosion in other countries at the national and European levels.

  18. Solid particle erosion and viscoelastic properties of thermoplastic polyurethanes

    Directory of Open Access Journals (Sweden)

    G. Arena

    2015-03-01

    Full Text Available The wear resistance of several thermoplastic polyurethanes (TPUs having different chemical nature and micronscale arrangement of the hard and soft segments has been investigated by means of erosion and abrasion tests. The goal was correlating the erosion performances of the materials to their macroscopic mechanical properties. Unlike conventional tests, such as hardness and tensile measurements, viscoelastic analysis proved to be a valuable tool to study the erosion resistance of TPUs. In particular, a strict correlation was found between the erosion rate and the high-frequency (~107 Hz loss modulus. The latter reflects the actual ability of TPU to dissipate the impact energy of the erodent particles.

  19. Preliminary Analysis on the Relative Solution Space Sizes for MTSP with Genetic Algorithm

    Science.gov (United States)

    Hao, Junling

    It is well known that the chromosome design is pivotal to solve the multiple traveling salesman problems with genetic algorithm. A well-designed chromosome coding can eliminate or reduce the redundant solutions. One chromosome and two chromosome design methods and a recently proposed two-part chromosome design are firstly introduced in this paper. Then the preliminary quantitative comparison analysis of the solution spaces of three different chromosome design methods is presented when the number of cities is linear with the travelers. The concept of relative solution space is proposed in order to compare the relative size of the solution spaces. The solution space of two-part chromosome design is much smaller than those of the traditional chromosome design. The result given in this paper provides a good guideline for the possible algorithmic design and engineering applications.

  20. Crystallization and preliminary X-ray analysis of alginate importer from Sphingomonas sp. A1.

    Science.gov (United States)

    Maruyama, Yukie; Itoh, Takafumi; Nishitani, Yu; Mikami, Bunzo; Hashimoto, Wataru; Murata, Kousaku

    2012-03-01

    Sphingomonas sp. A1 directly incorporates alginate polysaccharides through a 'superchannel' comprising a pit on the cell surface, alginate-binding proteins in the periplasm and an ABC transporter (alginate importer) in the inner membrane. Alginate importer, consisting of four subunits, AlgM1, AlgM2 and two molecules of AlgS, was crystallized in the presence of the binding protein AlgQ2. Preliminary X-ray analysis showed that the crystal diffracted to 3.3 Å resolution and belonged to space group P2(1)2(1)2(1), with unit-cell parameters a = 72.5, b = 136.8, c = 273.3 Å, suggesting the presence of one complex in the asymmetric unit.

  1. ANSI/ASHRAE/IES Standard 90.1-2013 Preliminary Determination: Qualitative Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, Mark A.; Hart, Reid; Athalye, Rahul A.; Rosenberg, Michael I.; Richman, Eric E.; Winiarski, David W.

    2014-03-01

    Section 304(b) of the Energy Conservation and Production Act (ECPA), as amended, requires the Secretary of Energy to make a determination each time a revised version of ASHRAE Standard 90.1 is published with respect to whether the revised standard would improve energy efficiency in commercial buildings. When the U.S. Department of Energy (DOE) issues an affirmative determination on Standard 90.1, states are statutorily required to certify within two years that they have reviewed and updated the commercial provisions of their building energy code, with respect to energy efficiency, to meet or exceed the revised standard. This report provides a preliminary qualitative analysis of all addenda to ANSI/ASHRAE/IES Standard 90.1-2010 (referred to as Standard 90.1-2010 or 2010 edition) that were included in ANSI/ASHRAE/IES Standard 90.1-2013 (referred to as Standard 90.1-2013 or 2013 edition).

  2. Crystallization and preliminary X-ray analysis of Rv1674c from Mycobacterium tuberculosis

    Science.gov (United States)

    Li, Jincheng; Wang, Xudong; Gong, Weimin; Niu, Chunyan; Zhang, Min

    2015-01-01

    Adaptations to hypoxia play an important role in Mycobacterium tuberculosis pathogenesis. Rv0324, which contains an HTH DNA-binding domain and a rhodanese domain, is one of the key transcription regulators in response to hypoxia. M. tuberculosis Rv1674c is a homologue of Rv0324. To understand the interdomain interaction and regulation of the HTH domain and the rhodanese domain, recombinant Rv1674c protein was purified and crystallized by the vapour-diffusion method. The crystals diffracted to 2.25 Å resolution. Preliminary diffraction analysis suggests that the crystals belonged to space group P3121 or P3221, with unit-cell parameters a = b = 67.8, c = 174.5 Å, α = β = 90, γ = 120°. The Matthews coefficient was calculated to be 2.44 Å3 Da−1, assuming that the crystallographic asymmetric unit contains two protein molecules. PMID:25760714

  3. Preliminary phytochemical analysis, antibacterial, antifungal and anticandidal activities of successive extracts of Crossandra infundibuliformis

    Institute of Scientific and Technical Information of China (English)

    MadhumithaG; SaralAM

    2011-01-01

    Objective:To investigate the phytochemical, antibacterial, antifungal and anticandidal activity of successive extracts of Crossandra infundibuliformis (Acanthaceae) leaves. Methods:Preliminary screening on the presence of alkaloids, saponins, phytosterols, phenolic compounds, flavanoids, tannins, carbohydrates, terpenoids, oils and fats were carried out by phytochemical analysis. The antibacterial, antifungal and anticandidal activities were done by agar well diffusion technique. Results:The successive extracts have an array of chemical constituents and the MIC values of antibacterial activity ranges from 0.007 8 to 0.015 0μg/mL. In case of antifungal and anticandidal activities the MIC values were between 0.125 and 0.250μg/mL. Conclusions:These findings demonstrate that the leaf extracts of C. infundibuliformis presents excellent antimicrobial activities and thus have great potential as a source for natural health care products.

  4. Preliminary C3 Loading Analysis for Future High-Altitude Unmanned Aircraft in the NAS

    Science.gov (United States)

    Ho, Yan-Shek; Gheorghisor, Izabela; Box, Frank

    2006-01-01

    This document provides a preliminary assessment and summary of the command, control, and communications (C(sup 3)) loading requirements of a generic future high-altitude, long-endurance unmanned aircraft (UA) operating at in the National Airspace System. Two principal types of C(sup 3) traffic are considered in our analysis: communications links providing air traffic services (ATS) to the UA and its human pilot, and the command and control data links enabling the pilot to operate the UA remotely. we have quantified the loading requirements of both types of traffic for two different assumed levels of UA autonomy. Our results indicate that the potential use of UA-borne relays for the ATS links, and the degree of autonomy exercised by the UA during the departure and arrival phases of its flight, will be among the key drivers of C(sup 3) loading and bandwidth requirements.

  5. Visual Assessment on Coastal Cruise Tourism: A Preliminary Planning Using Importance Performance Analysis

    Science.gov (United States)

    Trisutomo, S.

    2017-07-01

    Importance-Performance Analysis (IPA) has been widely applied in many cases. In this research, IPA was applied to measure perceive on coastal tourism objects and its possibility to be developed as coastal cruise tourism in Makassar. Three objects, i.e. Akkarena recreational site, Losari public space at waterfront, and Paotere traditional Phinisi ships port, were selected and assessed visually from water area by a group of purposive resource persons. The importance and performance of 10 attributes of each site were scored using Likert scale from 1 to 5. Data were processed by SPSS-21 than resulted Cartesian graph which the scores were divided in four quadrants: Quadrant I concentric here, Quadrant II keep up the good work, Quadrant III low priority, and Quadrant IV possible overkill. The attributes in each quadrant could be considered as the platform for preliminary planning of coastal cruise tour in Makassar

  6. Preliminary control system design and analysis for the Space Station Furnace Facility thermal control system

    Science.gov (United States)

    Jackson, M. E.

    1995-01-01

    This report presents the Space Station Furnace Facility (SSFF) thermal control system (TCS) preliminary control system design and analysis. The SSFF provides the necessary core systems to operate various materials processing furnaces. The TCS is defined as one of the core systems, and its function is to collect excess heat from furnaces and to provide precise cold temperature control of components and of certain furnace zones. Physical interconnection of parallel thermal control subsystems through a common pump implies the description of the TCS by coupled nonlinear differential equations in pressure and flow. This report formulates the system equations and develops the controllers that cause the interconnected subsystems to satisfy flow rate tracking requirements. Extensive digital simulation results are presented to show the flow rate tracking performance.

  7. Acanthamoeba polyphaga mimivirus NDK: preliminary crystallographic analysis of the first viral nucleoside diphosphate kinase.

    Science.gov (United States)

    Jeudy, Sandra; Coutard, Bruno; Lebrun, Régine; Abergel, Chantal

    2005-06-01

    The complete sequence of the largest known double-stranded DNA virus, Acanthamoeba polyphaga mimivirus, has recently been determined [Raoult et al. (2004), Science, 306, 1344-1350] and revealed numerous genes not expected to be found in a virus. A comprehensive structural and functional study of these gene products was initiated [Abergel et al. (2005), Acta Cryst. F61, 212-215] both to better understand their role in the virus physiology and to obtain some clues to the origin of DNA viruses. Here, the preliminary crystallographic analysis of the viral nucleoside diphosphate kinase protein is reported. The crystal belongs to the cubic space group P2(1)3, with unit-cell parameter 99.425 A. The self-rotation function confirms that there are two monomers per asymmetric unit related by a twofold non-crystallographic axis and that the unit cell thus contains four biological entities.

  8. Preliminary analysis of habitat utilization by woodland caribou in northwestern Ontario using satellite telemetry

    Directory of Open Access Journals (Sweden)

    T.L. Hillis

    1998-03-01

    Full Text Available Locational data collected over a one year period from 10 female woodland caribou, Rangifer tarandus caribou, collared with Argos satellite collars in northwestern Ontario, Canada were superimposed on supervised Landsat images using Geographical Information System (GIS technology. Landscape parameters, land cover classifications, and drainage were utilized to create the basemap. Using ARCVIEW software, all digital fixes from collared caribou with information of date, time, and activity status were overlain on the basemap to facilitate a preliminary analysis of habitat use in this species. Results supported the conclusions (1 that woodland caribou in northwestern Ontario select habitats containing high to moderate conifer cover and avoided disturbed areas and shrub-rich habitats, (2 that seasonal changes in habitat utilization occurs in females of this species, and (3 that satellite telemetry technology can be employed in the boreal forest ecosystem to assess habitat utilization by large ungulate species.

  9. Crystallization and preliminary X-ray analysis of Leishmania major glyoxalase I

    Energy Technology Data Exchange (ETDEWEB)

    Ariza, Antonio; Vickers, Tim J.; Greig, Neil; Fairlamb, Alan H.; Bond, Charles S., E-mail: c.s.bond@dundee.ac.uk [Division of Biological Chemistry and Molecular Microbiology, Wellcome Trust Biocentre, School of Life Sciences, University of Dundee, Dundee DD1 5EH,Scotland (United Kingdom)

    2005-08-01

    The detoxification enzyme glyoxalase I from L. major has been crystallized. Preliminary molecular-replacement calculations indicate the presence of three glyoxalase I dimers in the asymmetric unit. Glyoxalase I (GLO1) is a putative drug target for trypanosomatids, which are pathogenic protozoa that include the causative agents of leishmaniasis. Significant sequence and functional differences between Leishmania major and human GLO1 suggest that it may make a suitable template for rational inhibitor design. L. major GLO1 was crystallized in two forms: the first is extremely disordered and does not diffract, while the second, an orthorhombic form, produces diffraction to 2.0 Å. Molecular-replacement calculations indicate that there are three GLO1 dimers in the asymmetric unit, which take up a helical arrangement with their molecular dyads arranged approximately perpendicular to the c axis. Further analysis of these data are under way.

  10. Cognitive Work Analysis: Preliminary Data for a Model of Problem Solving Strategies

    Science.gov (United States)

    Rothmayer, Mark; Blue, Jennifer

    2007-10-01

    Investigations into problem solving strategies are part of the field of physics education research where investigators seek to improve physics instruction by conducting basic research of problem solving abilities among students, differences in knowledge representations between experts and novices, and how to transfer knowledge structures more effectively onto novices. We developed a new conceptual research tool in our laboratory, where we could potentially map the step by step flow of problem solving strategies among experts and novices. This model is derived from the theory of Cognitive Work Analysis, which is grounded in ecological psychology, and as far as we know it has never been applied to a knowledge domain like physics. We collected survey data from 140 undergraduates enrolled in an algebra based introductory physics course at Miami University as part of a larger study aimed to test the validity of the model. Preliminary data will be presented and discussed.

  11. Preliminary risk analysis applied to the transmission of Creutzfeldt-Jakob disease.

    Science.gov (United States)

    Bertrand, E; Schlatter, J

    2011-01-01

    Transmissible spongiform encephalopathy (TSE) is a degenerative disease of the central nervous system. As yet, there is no human screening test and no effective treatment. This disease is invariably fatal. General preventive measures are therefore essential. The objective of this study is to analyze and address on a prioritized basis the risks relating to the transmission of Creutzfeldt-Jakob disease during surgical operations by means of a preliminary risk analysis (PRA). The PRA produces 63 scenarios with maximum risk relating to operational and legal dangers. The study recommends a number of courses of action, such as training and internal controls, in order to reduce the risks identified. A procedure has been drawn up and assessed for each action. This PRA makes it possible to target and significantly reduce the potential dangers for transmission of Creutzfeldt-Jakob disease through the use of medical instruments.

  12. Purification, crystallization and preliminary X-ray analysis of uridine phosphorylase from Salmonella typhimurium.

    Science.gov (United States)

    Dontsova, Mariya V; Savochkina, Yulia A; Gabdoulkhakov, Azat G; Baidakov, Sergey N; Lyashenko, Andrey V; Zolotukhina, Maria; Errais Lopes, Liubov; Garber, Mariya B; Morgunova, Ekaterina Yu; Nikonov, Stanislav V; Mironov, Alexandr S; Ealick, Steven E; Mikhailov, Al 'Bert M

    2004-04-01

    The structural udp gene encoding uridine phosphorylase (UPh) was cloned from the Salmonella typhimurium chromosome and overexpressed in Escherichia coli cells. S. typhimurium UPh (StUPh) was purified to apparent homogeneity and crystallized. The primary structure of StUPh has high homology to the UPh from E. coli, but the enzymes differ substantially in substrate specificity and sensitivity to the polarity of the medium. Single crystals of StUPh were grown using hanging-drop vapor diffusion with PEG 8000 as the precipitant. X-ray diffraction data were collected to 2.9 A resolution. Preliminary analysis of the diffraction data indicated that the crystal belonged to space group P6(1(5)), with unit-cell parameters a = 92.3, c = 267.5 A. The solvent content is 37.7% assuming the presence of one StUPh hexamer per asymmetric unit.

  13. Crystallization and preliminary X-ray diffraction analysis of West Nile virus

    Energy Technology Data Exchange (ETDEWEB)

    Kaufmann, Barbel; Plevka, Pavel; Kuhn, Richard J.; Rossmann, Michael G. (Purdue)

    2010-05-25

    West Nile virus, a human pathogen, is closely related to other medically important flaviviruses of global impact such as dengue virus. The infectious virus was purified from cell culture using polyethylene glycol (PEG) precipitation and density-gradient centrifugation. Thin amorphously shaped crystals of the lipid-enveloped virus were grown in quartz capillaries equilibrated by vapor diffusion. Crystal diffraction extended at best to a resolution of about 25 {angstrom} using synchrotron radiation. A preliminary analysis of the diffraction images indicated that the crystals had unit-cell parameters a {approx_equal} b {approx_equal} 480 {angstrom}, {gamma} = 120{sup o}, suggesting a tight hexagonal packing of one virus particle per unit cell.

  14. Preliminary performance analysis of the advanced pulse compression noise radar waveform

    Science.gov (United States)

    Govoni, Mark A.; Moyer, Lee R.

    2012-06-01

    Noise radar systems encounter target fluctuation behavior similar to that of conventional systems. For noise radar systems, however, the fluctuations are not only dictated by target composition and geometry, but also by the non-uniform power envelope of their random transmit signals. This third dependency is of interest and serves as the basis for the preliminary analysis conducted in this manuscript. General conclusions are drawn on the implications of having a random power envelope and the impacts it could have on both the transmit and receive processes. Using an advanced pulse compression noise (APCN) radar waveform as the constituent signal, a computer simulation aids in quantifying potential losses and the impacts they might have on the detection performance of a real radar system.

  15. Soil erosion in China based on the 2000 national remote sensing survey

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper discussed the spatial distribution of soil erosion in China at the end of the 20thcentury based on the second national soil erosion survey. The result indicated soil erosion is still theprime environmental problem in China. Soil erosion mainly occurs in the western regions of China,and the slight erosion type, ion the whole, exerts the greatest impact on soil erosion pattern. Thedistribution of water erosion shows the impact of landforms: slight water erosion mainly inmountainous and hilly areas, and half of violent water erosion on the loess landforms. Farmland,forestland and grassland are the major land use types of slight hydraulic erosion distribution, while theserious hydraulic erosion and slight wind erosion mainly occur on grassland. Thus, the conservation ofthe grassland is the key to either hydraulic and wind erosion control. The huangmian soil (a major typeof cultivated soil developed from loess mother material) is the one facing the most serious threat fromsoil erosion in Chinas soil resources. Further discussion on the soil erosion distribution still needs moreresearch on the method and relevant data analysis.

  16. Preliminary Analysis of Aircraft Loss of Control Accidents: Worst Case Precursor Combinations and Temporal Sequencing

    Science.gov (United States)

    Belcastro, Christine M.; Groff, Loren; Newman, Richard L.; Foster, John V.; Crider, Dennis H.; Klyde, David H.; Huston, A. McCall

    2014-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes, and can result from a wide spectrum of hazards, often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and their validation must provide a means of assessing system effectiveness and coverage of these hazards. This requires the definition of a comprehensive set of LOC test scenarios based on accident and incident data as well as future risks. This paper defines a comprehensive set of accidents and incidents over a recent 15 year period, and presents preliminary analysis results to identify worst-case combinations of causal and contributing factors (i.e., accident precursors) and how they sequence in time. Such analyses can provide insight in developing effective solutions for LOC, and form the basis for developing test scenarios that can be used in evaluating them. Preliminary findings based on the results of this paper indicate that system failures or malfunctions, crew actions or inactions, vehicle impairment conditions, and vehicle upsets contributed the most to accidents and fatalities, followed by inclement weather or atmospheric disturbances and poor visibility. Follow-on research will include finalizing the analysis through a team consensus process, defining future risks, and developing a comprehensive set of test scenarios with correlation to the accidents, incidents, and future risks. Since enhanced engineering simulations are required for batch and piloted evaluations under realistic LOC precursor conditions, these test scenarios can also serve as a high-level requirement for defining the engineering simulation enhancements needed for generating them.

  17. Numerical simulation of hydrodynamics and bank erosion in a river bend

    NARCIS (Netherlands)

    Rinaldi, M; Mengoni, B.; Luppi, L.; Darby, S.E.; Mosselman, E.

    2008-01-01

    We present an integrated analysis of bank erosion in a high-curvature bend of the gravel bed Cecina River (central Italy). Our analysis combines a model of fluvial bank erosion with groundwater flow and bank stability analyses to account for the influence of hydraulic erosion on mass failure process

  18. Integrated geomorphologic and GIS analysis for the assessment of erosion zones and its relationship with hazardous zones in the Zacatecas and Guadalupe quadrangles, Mexico

    Science.gov (United States)

    Escalona-Alcázar, F. d. J.; Escobedo-Arellano, B.; Castillo-Félix, B.; Carrillo-Castillo, C.; García-Sandoval, P.; Gurrola-Menchaca, L. L.; Núñez-Peña, E. P.; Esparza-Martínez, A.; Bluhm-Gutiérrez, J.; Guijarro-Rodríguez, C. J.

    2012-04-01

    The morphology of the Zacatecas and Guadalupe quadrangles is composed to the West by a NNE-SSW fault bounded range and to the East a valley cut by minor hills. The most important and fast growing cities in the state are located in that range. However, in urban development plans variables such as the geology and geomorphologic processes, as well as the land cover characteristics, are poorly taken into consideration. Due to the landscape modification the erosion agents, mainly water, removes loose materials that are either natural or artificial. The effects on the buildings and roads are fractures, slope instability, and rock falling. In this study we present a model that considers the detailed geologic mapping, the geomorphology, land use, vegetation, and the digital slope model scale 1:50 000. The geomorphologic parameters considered were: relief energy, dissection density, general dissection density, and maximum dissection depth. The location and internal characteristics of mapped talus deposits were the basis to define the erosion criteria. High erosion zones are located in slopes over 20° where the talus deposits initiate due to the relative abundance of loose debris. Medium erosion areas are located in slopes over 10° that downslope has progressive accumulation of sediments. While the low erosion zones are located in slopes ranging from 5° to 20° with almost flat lying beds. These parameters were analyzed in ArcGIS together with the digital slope model, detailed geology mapping, the land use cover, and the soil information. The results where verified in the range where the city has been growing in recent years. The soils all over the range are lithosols which are only 10 to 15 cm thick; while the vegetation is composed mainly of bushes and nopals. Even though both, vegetation and soil are not modified, the erosion effects in them are very slow regardless of their location. The faults located in high erosion zones facilitate rock falling mainly during the

  19. Particle erosion of infrared materials

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Erosion test of some infrared (IR) optical crystals (Ge,ZnS,MgF2,and quartz) was conducted with a number of different erodents (glass bead,and angular SiC,SiO2,Al2O3 by a homemade gas-blasting erosion tester.The influence of impact angle,impact velocity,erodent,and erosion time on the erosion rate and the effect of erosion on their IR transmittance were studied.The damaged surface morphology was characterized by scanning electron microscopy,and the erosion mechanism was explored.All of the materials show the maximum in wear versus impact angle at 90°,confirming their brittle failure behavior.It is found that the erosion rate is dependent on the erodent velocity by a power law,and it is highly correlated to the hardness of the erodent.The erosion rate-time curves do not show an incubation state,but an accelerated erosion period followed a maximum erosion (steady state).The decrease of IR transmittance is direct proportion to the erosion rate.Although the material loss occurs primarily by brittle process,ductile behavior is clearly an important feature,especially for MgF2 and ZnS.

  20. Actinides, accelerators and erosion

    Science.gov (United States)

    Tims, S. G.; Fifield, L. K.

    2012-10-01

    Fallout isotopes can be used as artificial tracers of soil erosion and sediment accumulation. The most commonly used isotope to date has been 137Cs. Concentrations of 137Cs are, however, significantly lower in the Southern Hemisphere, and furthermore have now declined to 35% of original values due to radioactive decay. As a consequence the future utility of 137Cs is limited in Australia, with many erosion applications becoming untenable within the next 20 years, and there is a need to replace it with another tracer. Plutonium could fill this role, and has the advantages that there were six times as many atoms of Pu as of 137Cs in fallout, and any loss to decay has been negligible due to the long half-lives of the plutonium isotopes. Uranium-236 is another long-lived fallout isotope with significant potential for exploitation as a tracer of soil and sediment movement. Uranium is expected to be more mobile in soils than plutonium (or caesium), and hence the 236U/Pu ratio will vary with soil depth, and so could provide an independent measure of the amount of soil loss. In this paper we discuss accelerator based ultra-sensitive measurements of plutonium and 236U isotopes and their advantages over 137Cs as tracers of soil erosion and sediment movement.

  1. Actinides, accelerators and erosion

    Directory of Open Access Journals (Sweden)

    Fifield L.K.

    2012-10-01

    Full Text Available Fallout isotopes can be used as artificial tracers of soil erosion and sediment accumulation. The most commonly used isotope to date has been 137Cs. Concentrations of 137Cs are, however, significantly lower in the Southern Hemisphere, and furthermore have now declined to 35% of original values due to radioactive decay. As a consequence the future utility of 137Cs is limited in Australia, with many erosion applications becoming untenable within the next 20 years, and there is a need to replace it with another tracer. Plutonium could fill this role, and has the advantages that there were six times as many atoms of Pu as of 137Cs in fallout, and any loss to decay has been negligible due to the long half-lives of the plutonium isotopes. Uranium-236 is another long-lived fallout isotope with significant potential for exploitation as a tracer of soil and sediment movement. Uranium is expected to be more mobile in soils than plutonium (or caesium, and hence the 236U/Pu ratio will vary with soil depth, and so could provide an independent measure of the amount of soil loss. In this paper we discuss accelerator based ultra-sensitive measurements of plutonium and 236U isotopes and their advantages over 137Cs as tracers of soil erosion and sediment movement.

  2. Impact of Soil Erosion on Rural Poverty

    Institute of Scientific and Technical Information of China (English)

    Jiangyong; LU; Gong; CHEN

    2013-01-01

    This article gives an overview of the general situation and regional differences of rural poverty in China, and points out that in the rural areas of central and western regions with serious soil erosion, the poverty is particularly prominent. Based on previous studies, we take agricultural GDP as the dependent variable, farmland area, agricultural labor, agricultural capital stock, irrigation area, and consumption of chemical fertilizer as the independent variables, to establish the C-D production function reflecting impact of soil erosion on rural poverty for regression analysis. The results show that farmland, labor, capital, irrigation, chemical fertilizer and other production factors have a positive effect on agricultural GDP; soil erosion has a significant negative effect on agricultural production; in western China, the total factor productivity is the lowest and soil erosion is the most serious. In order to resolve the dilemma of soil erosion and rural poverty, it is necessary to change the extensive mode of agricultural development, protect the ecological environment, and take the road of intensive development of agroecology.

  3. Preliminary Safety Analysis Report for the Transuranic Storage Area Retrieval Enclosure at the Idaho National Engineering Laboratory. Revision 8

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This Transuranic Storage Area Retrieval Enclosure Preliminary Safety Analysis Report was completed as required by DOE Order 5480.23. The purpose of this document is to construct a safety basis that supports the design and permits construction of the facility. The facility has been designed to the requirements of a Radioactive Solid Waste Facility presented in DOE Order 6430.1A.

  4. Yucca Mountain transportation routes: Preliminary characterization and risk analysis; Volume 2, Figures [and] Volume 3, Technical Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Souleyrette, R.R. II; Sathisan, S.K.; di Bartolo, R. [Nevada Univ., Las Vegas, NV (United States). Transportation Research Center

    1991-05-31

    This report presents appendices related to the preliminary assessment and risk analysis for high-level radioactive waste transportation routes to the proposed Yucca Mountain Project repository. Information includes data on population density, traffic volume, ecologically sensitive areas, and accident history.

  5. Yucca Mountain transportation routes: Preliminary characterization and risk analysis; Volume 2, Figures [and] Volume 3, Technical Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Souleyrette, R.R. II; Sathisan, S.K.; di Bartolo, R. [Nevada Univ., Las Vegas, NV (United States). Transportation Research Center

    1991-05-31

    This report presents appendices related to the preliminary assessment and risk analysis for high-level radioactive waste transportation routes to the proposed Yucca Mountain Project repository. Information includes data on population density, traffic volume, ecologically sensitive areas, and accident history.

  6. Waste Feed Delivery System Phase 1 Preliminary Reliability and Availability and Maintainability Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    CARLSON, A.B.

    1999-11-11

    The document presents updated results of the preliminary reliability, availability, maintainability analysis performed for delivery of waste feed from tanks 241-AZ-101 and 241-AN-105 to British Nuclear Fuels Limited, inc. under the Tank Waste Remediation System Privatization Contract. The operational schedule delay risk is estimated and contributing factors are discussed.

  7. Radiation induced erosion of autoelectron emitter surface

    CERN Document Server

    Mazilova, T I; Ksenofontov, V A

    2001-01-01

    The peculiarities of erosion of the needle-shaped autoemitter surface under the effect of the helium ions bombardment are studied. The analysis of the radiation-induced formation of the surface atomic roughness testifies to the nondynamic character of shifting the surface atoms by the ions energies below the threshold of the Frenkel stable pairs formation and cathode sputtering. The quasistatic mechanism of the surface erosion due to the atoms shift into the low-coordination positions by releasing the energy of the helium internodal atoms formation is discussed

  8. A preliminary assessment of using a white light confocal imaging profiler for cut mark analysis.

    Science.gov (United States)

    Schmidt, Christopher W; Moore, Christopher R; Leifheit, Randell

    2012-01-01

    White light confocal microscopy creates detailed 3D representations of microsurfaces that can be qualitatively and quantitatively analyzed. The study describes its application to the analysis of cut marks on bone, particularly when discerning cuts made by steel tools from those made by stone. The process described comes from a study where cuts were manually made on a cow rib with seven cutting tools, four stone (an unmodified chert flake, a chert biface, a bifacially ground slate fragment, and an unsharpened piece of slate), and three steel (a Swiss Army Knife, a serrate steak knife, and a serrate saw). Kerfs were magnified ×20 and 3D data clouds were generated using a Sensofar(®) White Light Confocal Profiler (WLCP). Kerf profiles and surface areas, volumes, mean depths, and maximum depths were calculated with proprietary software (SensoScan(®) and SolarMap(®)). For the most part, the stone tools make shallower and wider cuts. Kerf floors can be studied at higher magnifications; they were viewed at ×100. When comparing the kerf floors of the unsharpened slate and the serrate steak knife it was found that the slate floor was more uneven, but the serrate steak knife generated more overall relief. Although preliminary, the approach described here successfully distinguishes stone and steel tools; the authors conclude that the WLCP is a promising technology for cut mark analysis because of the very detailed 3D representations it creates and the numerous avenues of analysis it provides.

  9. Preliminary Drop Time Analysis of a Control Rod Using CFD Code

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myoung Hwan; Park, Jin Seok; Lee, Won Jae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Jun Hong [SEST Co., Seoul (Korea, Republic of)

    2010-05-15

    A control rod drive mechanism (CRDM) is a reactor regulating system, which can insert and withdraw a control rod containing a neutron absorbing material to control the reactivity of the reactor core. The latch type CRDM for the SMART (System-integrated Modular Advanced ReacTor) is going to be used. The drop time of the control rod in the design stage is one of important parameters for a safety analysis of the reactor. When the control rod is falling down into the core, it is retarded by various forces acting on it such as fluid resistance buoyancy and mechanical friction caused by contacting the inner surface of the guide thimble, etc.. However, complicated coupling of the various forces makes it difficult to predict the drop behavior. This paper describes the development of the 3D CFD analysis model using a FLUENT code. The single control rod of the Westinghouse 17x17 type optimized fuel assembly (W-OFA) was considered for the verification of the CFD model. A preliminary drop time analysis for the SMART with the simulated control rod was performed

  10. A Preliminary Analysis of Precipitation Properties and Processes during NASA GPM IFloodS

    Science.gov (United States)

    Carey, Lawrence; Gatlin, Patrick; Petersen, Walt; Wingo, Matt; Lang, Timothy; Wolff, Dave

    2014-01-01

    The Iowa Flood Studies (IFloodS) is a NASA Global Precipitation Measurement (GPM) ground measurement campaign, which took place in eastern Iowa from May 1 to June 15, 2013. The goals of the field campaign were to collect detailed measurements of surface precipitation using ground instruments and advanced weather radars while simultaneously collecting data from satellites passing overhead. Data collected by the radars and other ground instruments, such as disdrometers and rain gauges, will be used to characterize precipitation properties throughout the vertical column, including the precipitation type (e.g., rain, graupel, hail, aggregates, ice crystals), precipitation amounts (e.g., rain rate), and the size and shape of raindrops. The impact of physical processes, such as aggregation, melting, breakup and coalescence on the measured liquid and ice precipitation properties will be investigated. These ground observations will ultimately be used to improve rainfall estimates from satellites and in particular the algorithms that interpret raw data for the upcoming GPM mission's Core Observatory satellite, which launches in 2014. The various precipitation data collected will eventually be used as input to flood forecasting models in an effort to improve capabilities and test the utility and limitations of satellite precipitation data for flood forecasting. In this preliminary study, the focus will be on analysis of NASA NPOL (S-band, polarimetric) radar (e.g., radar reflectivity, differential reflectivity, differential phase, correlation coefficient) and NASA 2D Video Disdrometers (2DVDs) measurements. Quality control and processing of the radar and disdrometer data sets will be outlined. In analyzing preliminary cases, particular emphasis will be placed on 1) documenting the evolution of the rain drop size distribution (DSD) as a function of column melting processes and 2) assessing the impact of range on ground-based polarimetric radar estimates of DSD properties.

  11. Hydrodynamic erosion process of undisturbed clay

    NARCIS (Netherlands)

    Zhao, G.; Visser, P.J.; Vrijling, J.K.

    2011-01-01

    This paper describes the hydrodynamic erosion process of undisturbed clay due to the turbulent flow, based on theoretical analysis and experimental results. The undisturbed clay has the unique and complicated characteristics of cohesive force among clay particles, which are highly different from dis

  12. Identifying pyroclastic and lahar deposits and assessing erosion and lahar hazards at active volcanoes using multi-temporal HSR image analysis and techniques for change detection

    Science.gov (United States)

    Kassouk, Zeineb; Thouret, Jean-Claude; Oehler, Jean-François; Solikhin, Akhmad

    2014-05-01

    The increasing availability of high-spatial resolution (HSR) remote sensing images leads to new opportunities for hazard assessment in the case of active volcanoes. Object-oriented analysis (OOA) of HSR images helps to simultaneously exploit spatial, spectral and contextual information. Here, we identify and delineate pyroclastic density current (PDC) and post-eruption lahar deposits on the south flank of Merapi volcano, Indonesia, after the large 2010 eruption. GeoEye-1 (2010 and 2011) and Pleiades (2012) images were analyzed with an adjusted object-oriented method. The PDC deposits include valley-confined block-and-ash flows (BAFs), unconfined, overbank pyroclastic flows (OPFs), and high-energy surges or ash-cloud surges. We follow up the evolution of the pyroclastic and lahar deposits through changes in the spectral indices calculated in segmented features, which represent the principal units of deposits and devastated areas. The object-oriented analysis has been applied to the pseudo image comprising of three spectral indices (NDWI water index; NDVI vegetation index; and NDRSI Red Soil Index). This pseudo image has enabled us to delineate fifteen units of PDC and lahar deposits, and damaged forests and settlements in the Gendol-Opak catchment (c.80 sqkm). The units represent 75% of classes obtained by photointerpretation of the same image and supported by field observations. A combination of NDWI and NDVI helps to separate areas affected by surges (NDWI 0.3 and NDWIsurges. The NDWI/NDRSI 2010 plot displays two clusters: NDRSI close to 0 is assigned to scoria-rich PFs while NDWI close to 0 and NDRSI4 x106/km2/year) from erosion acting in the Gendol valley, which characterize composite volcanoes after a large eruption. HSR images have also helped to measure geomorphic characteristics (channel capacity/wetted section; longitudinal change in channel confinement, and channel sinuosity) of river channels, which favor overbank and avulsion of lahars on a densely

  13. Aerolian erosion, transport, and deposition of volcaniclastic sands among the shifting sand dunes, Christmas Lake Valley, Oregon: TIMS image analysis

    Science.gov (United States)

    Edgett, Kenneth S.; Ramsey, Michael S.; Christensen, Philip R.

    1995-01-01

    Remote sensing is a tool that, in the context of aeolian studies, offers a synoptic view of a dune field, sand sea, or entire desert region. Blount et al. (1990) presented one of the first studies demonstrating the power of multispectral images for interpreting the dynamic history of an aeolian sand sea. Blount's work on the Gran Desierto of Mexico used a Landsat TM scene and a linear spectral mixing model to show where different sand populations occur and along what paths these sands may have traveled before becoming incorporated into dunes. Interpretation of sand transport paths and sources in the Gran Desierto led to an improved understanding of the origin and Holocene history of the dunes. With the anticipated advent of the EOS-A platform and ASTER thermal infrared capability in 1998, it will become possible to look at continental sand seas and map sand transport paths using 8-12 mu m bands that are well-suited to tracking silicate sediments. A logical extension of Blount's work is to attempt a similar study using thermal infrared images. One such study has already begun by looking at feldspar, quartz, magnetite, and clay distributions in the Kelso Dunes of southern California. This paper describes the geology and application of TIMS image analysis of a less-well known Holocene dune field in south central Oregon using TIMS data obtained in 1991.

  14. Plutonium as a tracer for soil erosion assessment in northeast China

    DEFF Research Database (Denmark)

    Xu, Yihong; Qiao, Jixin; Pan, Shaoming;

    2015-01-01

    Soil erosion is one of the most serious environmental and agricultural problems faced by human society. Assessing intensity is an important issue for controlling soil erosion and improving eco-environmental quality. The suitability of the application of plutonium (Pu) as a tracer for soil erosion...... assessment in northeast China was investigated by comparing with that of 137Cs. Here we build on preliminary work, in which we investigated the potential of Pu as a soil erosion tracer by sampling additional reference sites and potential erosive sites, along the Liaodong Bay region in northeast China, for Pu...... in cultivated land. The baseline inventories of 239+240Pu and 137Cs were 88.4 and 1688Bqm-2 respectively. Soil erosion rates estimated by 239+240Pu tracing method were consistent with those obtained by the 137Cs method, confirming that Pu is an effective tracer with a similar tracing behavior to that of 137Cs...

  15. Coastal Vulnerability to Sea Level Rise and Erosion in Northwest Alaska (Invited)

    Science.gov (United States)

    Gorokhovich, Y.; Leiserowitz, A.

    2009-12-01

    Northwest Alaska is experiencing significant climate change and human impacts. The study area includes the coastal zone of Kotzebue Sound and the Chukchi Sea and provides the local population (predominantly Inupiaq Eskimo) with critical subsistence resources of meat, fish, berries, herbs, and wood. The geomorphology of the coast includes barrier islands, inlets, estuaries, deltas, cliffs, bluffs, and beaches that host modern settlements and infrastructure. Coastal dynamics and sea-level rise are contributing to erosion, intermittent erosion/accretion patterns, landslides, slumps and coastal retreat. These factors are causing the sedimentation of deltas and lagoons, and changing local bathymetry, morphological parameters of beaches and underwater slopes, rates of coastal dynamics, and turbidity and nutrient cycling in coastal waters. This study is constructing vulnerability maps to help local people and federal officials understand the potential consequences of sea-level rise and coastal erosion on local infrastructure, subsistence resources, and culturally important sites. A lack of complete and uniform data (in terms of methods of collection, geographic scale and spatial resolution) creates an additional level of uncertainty that complicates geographic analysis. These difficulties were overcome by spatial modeling with selected spatial resolution using extrapolation methods. Data include subsistence resource maps obtained using Participatory GIS with local hunters and elders, geological and geographic data on coastal dynamics from satellite imagery, aerial photos, bathymetry and topographic maps, and digital elevation models. These data were classified and ranked according to the level of coastal vulnerability (Figure 1). The resulting qualitative multicriteria model helps to identify the coastal areas with the greatest vulnerability to coastal erosion and of the potential loss of subsistence resources. Acknowldgements: Dr. Ron Abileah (private consultant, j

  16. Advanced experimental and numerical techniques for cavitation erosion prediction

    CERN Document Server

    Chahine, Georges; Franc, Jean-Pierre; Karimi, Ayat

    2014-01-01

    This book provides a comprehensive treatment of the cavitation erosion phenomenon and state-of-the-art research in the field. It is divided into two parts. Part 1 consists of seven chapters, offering a wide range of computational and experimental approaches to cavitation erosion. It includes a general introduction to cavitation and cavitation erosion, a detailed description of facilities and measurement techniques commonly used in cavitation erosion studies, an extensive presentation of various stages of cavitation damage (including incubation and mass loss), and insights into the contribution of computational methods to the analysis of both fluid and material behavior. The proposed approach is based on a detailed description of impact loads generated by collapsing cavitation bubbles and a physical analysis of the material response to these loads. Part 2 is devoted to a selection of nine papers presented at the International Workshop on Advanced Experimental and Numerical Techniques for Cavitation Erosion (Gr...

  17. Preliminary analysis of Stearoyl Co-A Desaturase gene transcripts in River buffalo

    Directory of Open Access Journals (Sweden)

    L. Ramunno

    2010-02-01

    Full Text Available Stearoyl-CoA desaturase (SCD is a key enzyme in the biosynthesis of monounsaturated fatty acids (MUFAs. In cattle, SCD gene extends over a DNA segment of ~17.0 Kb, and it is organized in 6 exons and 5 introns. The SCD gene has been indicated as the candidate gene to change the saturated/unsaturated FAs ratio and hence it has been suggested as the gene influencing the fat quality. In cattle, eight SNPs have been identified and one of them, (T→C at 231st nt of 5th exon, is responsible for the Val→Ala amino acid change. The C allele has been associated with higher content of MUFAs in carcasses, and it is positively related to a higher index of desaturation (C18:0/C18:1 and C16:0/C16:1 in the milk. In this study, we report on preliminary results of analysis of transcripts of the SCD encoding gene in river buffalo. The electrophoretic analysis of the RT-PCR products and the subsequent sequencing showed at least five different populations of mRNA. The most represented population is correctly assembled (~1300 bp, followed by the one which is deleted of ~750bp, corresponding to the 3rd, 4th and 5th exon and partially to the 2nd and 6th exon.

  18. Biomarkers of Eating Disorders Using Support Vector Machine Analysis of Structural Neuroimaging Data: Preliminary Results.

    Science.gov (United States)

    Cerasa, Antonio; Castiglioni, Isabella; Salvatore, Christian; Funaro, Angela; Martino, Iolanda; Alfano, Stefania; Donzuso, Giulia; Perrotta, Paolo; Gioia, Maria Cecilia; Gilardi, Maria Carla; Quattrone, Aldo

    2015-01-01

    Presently, there are no valid biomarkers to identify individuals with eating disorders (ED). The aim of this work was to assess the feasibility of a machine learning method for extracting reliable neuroimaging features allowing individual categorization of patients with ED. Support Vector Machine (SVM) technique, combined with a pattern recognition method, was employed utilizing structural magnetic resonance images. Seventeen females with ED (six with diagnosis of anorexia nervosa and 11 with bulimia nervosa) were compared against 17 body mass index-matched healthy controls (HC). Machine learning allowed individual diagnosis of ED versus HC with an Accuracy ≥ 0.80. Voxel-based pattern recognition analysis demonstrated that voxels influencing the classification Accuracy involved the occipital cortex, the posterior cerebellar lobule, precuneus, sensorimotor/premotor cortices, and the medial prefrontal cortex, all critical regions known to be strongly involved in the pathophysiological mechanisms of ED. Although these findings should be considered preliminary given the small size investigated, SVM analysis highlights the role of well-known brain regions as possible biomarkers to distinguish ED from HC at an individual level, thus encouraging the translational implementation of this new multivariate approach in the clinical practice.

  19. Biomarkers of Eating Disorders Using Support Vector Machine Analysis of Structural Neuroimaging Data: Preliminary Results

    Directory of Open Access Journals (Sweden)

    Antonio Cerasa

    2015-01-01

    Full Text Available Presently, there are no valid biomarkers to identify individuals with eating disorders (ED. The aim of this work was to assess the feasibility of a machine learning method for extracting reliable neuroimaging features allowing individual categorization of patients with ED. Support Vector Machine (SVM technique, combined with a pattern recognition method, was employed utilizing structural magnetic resonance images. Seventeen females with ED (six with diagnosis of anorexia nervosa and 11 with bulimia nervosa were compared against 17 body mass index-matched healthy controls (HC. Machine learning allowed individual diagnosis of ED versus HC with an Accuracy ≥ 0.80. Voxel-based pattern recognition analysis demonstrated that voxels influencing the classification Accuracy involved the occipital cortex, the posterior cerebellar lobule, precuneus, sensorimotor/premotor cortices, and the medial prefrontal cortex, all critical regions known to be strongly involved in the pathophysiological mechanisms of ED. Although these findings should be considered preliminary given the small size investigated, SVM analysis highlights the role of well-known brain regions as possible biomarkers to distinguish ED from HC at an individual level, thus encouraging the translational implementation of this new multivariate approach in the clinical practice.

  20. The 6 April 2009 earthquake at L'Aquila: a preliminary analysis of magnetic field measurements

    Directory of Open Access Journals (Sweden)

    U. Villante

    2010-02-01

    Full Text Available Several investigations reported the possible identification of anomalous geomagnetic field signals prior to earthquake occurrence. In the ULF frequency range, candidates for precursory signatures have been proposed in the increase in the noise background and polarization parameter (i.e. the ratio between the amplitude/power of the vertical component and that one of the horizontal component, in the changing characteristics of the slope of the power spectrum and fractal dimension, in the possible occurrence of short duration pulses. We conducted, with conventional techniques of data processing, a preliminary analysis of the magnetic field observations performed at L'Aquila during three months preceding the 6 April 2009 earthquake, focusing attention on the possible occurrence of features similar to those identified in previous events. Within the limits of this analysis, we do not find compelling evidence for any of the features which have been proposed as earthquake precursors: indeed, most of aspects of our observations (which, in some cases, appear consistent with previous findings might be interpreted in terms of the general magnetospheric conditions and/or of different sources.

  1. Crystallization and preliminary X-ray diffraction analysis of human adenovirus

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, V.S.; Natchiar, S.K.; Gritton, L.; Mullen, T.-M.; Stewart, P.L.; Nemerow, G.R. (Scripps); (Vanderbilt)

    2010-07-22

    Replication-defective and conditionally replicating adenovirus (AdV) vectors are currently being utilized in {approx}25% of human gene transfer clinical trials. Unfortunately, progress in vector development has been hindered by a lack of accurate structural information. Here we describe the crystallization and preliminary X-ray diffraction analysis of a HAdV5 vector that displays a short flexible fiber derived from HAdV35. Crystals of Ad35F were grown in 100 mM HEPES pH 7.0, 200 mM Ca(OAc){sub 2}, 14% PEG 550 MME, 15% glycerol in 100 mM Tris-HCl 8.5. Freshly grown crystals diffracted well to 4.5 {angstrom} resolution and weakly to 3.5 {angstrom} at synchrotron sources. HAdV crystals belong to space group P1 with unit cell parameters a = 854.03 {angstrom}, b = 855.17 {angstrom}, c = 865.24 {angstrom}, {alpha} = 119.57{sup o}, {beta} = 91.71{sup o}, {gamma} = 118.08{sup o} with a single particle in the unit cell. Self-rotation and locked-rotation function analysis allowed the determination of the particle orientation. Molecular replacement, density modification and phase-extension procedures are being employed for structure determination.

  2. Ocean thermal energy conversion cold water pipe preliminary design project. Task 2. Analysis for concept selection

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-04-01

    The successful performance of the CWP is of crucial importance to the overall OTEC system; the pipe itself is considered the most critical part of the entire operation. Because of the importance the CWP, a project for the analysis and design of CWP's was begun in the fall of 1978. The goals of this project were to study a variety of concepts for delivering cold water to an OTEC plant, to analyze and rank these concepts based on their relative cost and risk, and to develop preliminary design for those concepts which seemed most promising. Two representative platforms and sites were chosen: a spar buoy of a Gibbs and Cox design to be moored at a site off Punta Tuna, Puerto Rico, and a barge designed by APL/Johns Hopkins University, grazing about a site approximately 200 miles east of the coast of Brazil. The approach was to concentrate on the most promising concepts and on those which were either of general interest or espoused by others (e.g., steel and concrete concepts). Much of the overall attention, therefore, focused on analyzing rigid and compliant wall design, while stockade (except for the special case of the FRP stockade) and bottom-mounted concepts received less attention. A total of 67 CWP concepts were initially generated and subjected to a screening process. Of these, 16 were carried through design analysis, costing, and ranking. Study results are presented in detail. (WHK)

  3. A terminological matter: paragenesis, antigravitative erosion or antigravitational erosion ?

    Directory of Open Access Journals (Sweden)

    Pasini G.

    2009-07-01

    Full Text Available In the speleological literature three terms are utilized to designate the “ascending erosion”: paragenesis (= paragénésis, coined in1968, antigravitative erosion (= erosione antigravitativa, coined in 1966 and antigravitational erosion (wrong English translation ofthe Italian term erosione antigravitativa, utilized later on. The term paragenesis should be abandoned because of the priority of theterm erosione antigravitativa - on the ground of the “law of priority” – and because of its ambiguous etimology. On the other hand,the term antigravitational erosion should be forsaken in favour of the term antigravitative erosion, given the meaning that the termsgravitation and gravity have in Physics. Therefore, to designate the phenomenon of the “ascending erosion” there would be nothingleft but the term antigravitative erosion.The antigravitative erosion process and its recognizability are illustrated.Examples of caves with evident antigravitative erosion phenomena, developed in different karstifiable rocks and in several partsof the world, are given.It is recalled that the antigravitative erosion is a phenomenon well-known since 1942 and widely proven and supported, and that it isrelatively easy – in many cases - to recognize the antigravitative origin of karstic passages.It is stressed that the antigravitative erosion is an important phenomenon, exclusive of the karstic caves and unique in nature.

  4. Geoinformation mapping of soil erosion in the Middle Volga region

    Science.gov (United States)

    Yermolaev, O. P.

    2017-01-01

    The results of a medium-scale geoinformation mapping of soil erosion on an area of about 150000 km2 in the Middle Volga region are analyzed using the catchment-based approach. A quantitative index of the development of soil erosion on the agricultural lands is suggested. It reflects the intensity of soil erosion on slopes within the river catchments. A computer-based vector map of the boundaries of 3331 elementary catchments has been developed. It represents the territorial units for the analysis of soil erosion. Archive materials from the former institutes for land survey have been used to compile a series of the maps of soil erosion in river catchments on a scale of 1: 200000. The zoning of erosional processes has been performed, and the natural and anthropogenic levels of soil erosion in different basins have been estimated. The analysis of these materials shows that the topography and agricultural activity of humans are the major factors controlling the development of erosion. The maximum development of soil erosion in the studied region is typical of the subzone of broadleaved forests.

  5. Reactive Aggression and Suicide-Related Behaviors in Children and Adolescents: A Review and Preliminary Meta-Analysis.

    Science.gov (United States)

    Hartley, Chelsey M; Pettit, Jeremy W; Castellanos, Daniel

    2017-01-03

    The empirical literature on the association between reactive aggression and suicide-related behaviors in children and adolescents was reviewed. A narrative review of seven studies that met inclusion/exclusion criteria is followed by a preliminary meta-analysis to provide insight into the strength of the association between reactive aggression and suicide-related behaviors. Each of the seven studies reported a statistically significant association between reactive aggression and suicide-related behaviors, including suicide, nonfatal suicide attempt, and suicide ideation. Results from the meta-analysis indicated a consistent, medium-sized association (k = 7; N = 4,693; rbar = .25). The narrative review and results of the preliminary meta-analysis support the promise of pursuing future research on reactive aggression and suicide-related behaviors in children and adolescents. A theoretical model is proposed to guide the development of future research.

  6. Report on preliminary analysis of state of nuclear criticality accident at JCO at Tokaimura, Ibaraki, Japan (I)

    Energy Technology Data Exchange (ETDEWEB)

    Ha, J.J.; Park, J.H.; Chang, J.H. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    This preliminary report was prepared by the Special Task Force Team of KAERI in order to analysis status of nuclear criticality accident broken out at 10:35 September 30, 1999 at JCO nuclear conversion test facility located at Tokaimura, Ibaraki, Japan. The report was consisted of accident summary of cause of accident summary of cause of accident and response by relevant organizations, and preliminary technical analysis of radiation exposure of JCO workers, analysis of cause of accident, and accident assessment and preventive actions against criticality accident. It is expected that JCO accident, Japan's first nuclear criticality accident, would make significant effects to Japan nuclear policy and would be also a good example to Korea future actions to be taken in use and development of nuclear energy. 63 refs., 3 figs., 1 tab. (Author)

  7. Preliminary results on the EUCLID NISP stray-light and ghost analysis

    Science.gov (United States)

    Geis, Norbert; Grupp, Frank; Prieto, Eric; Bender, Ralf

    2015-09-01

    The EUCLID mission within the European Space Agencies 2015 - 2025 Cosmic Vision framework addresses cosmological questions related to dark matter and dark energy. EUCLID is equipped with two instruments that are simultaneously observing patches of > 0:5 square degree on the sky. The VIS visual light high spacial resolution imager and the NISP near infrared spectrometer and photometer are separated by a di-chroic beam splitter. With its large FoV (larger than the full moon disk), together with high demands on the optical performance and strong requirements on in flight stability lead to very challenging demands on alignment and post launch { post cool-down optical element position. In addition the demanding requirements from spectroscopy and galaxy photometry lead to a highly demanding stray light and ghost control need. With this paper we present a preliminary - PDR level - analysis of ghosting and stray light levels in the EUCLID NISP near infrared spectrometer and photometer. The analysis presented focuses on the photometric channel, as this, together with the wide field of the instrument, shows most of the challenges and features of the instrument. As one requirement is to have a non vignetting design, extensive baffling is not possible, and only secondary and higher order light can be actively baffled. A comprehensive ZEMAX based analysis is being presented, showing in summary that baffles are only necessary due to the EUCLID fine guiding sensors auxiliary fields of view. The total level of contaminating light is thereafter dominated by stray light from dust on the lenses. Ghosts play a minor role.

  8. Erosion and redeposition processes of molybdenum with oblique incidence of magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Kojima, Masahiro; Ido, Yasuhiro; Ezumi, Naomichi; Ohno, Noriyasu; Takamura, Shuichi [Nagoya Univ. (Japan)

    1997-04-01

    Erosion and redeposition processes have been investigated using a linear plasma device and a Monte Carlo simulation code. Argon plasmas were irradiated on a molybdenum substrate with an oblique incidence of magnetic field. The erosion distributions depending on the direction of magnetic field are clearly observed. Numerical code analysis gives a qualitative explanation for the erosion profiles by considering the effect of prompt redeposition of high Z material. However, we have still quantitative differences for their erosion and redeposition rates. (author)

  9. Analysis and Experimental Research on Erosion of Cementing Sliding Sleeve%套管固井滑套冲蚀磨损模拟分析与试验研究

    Institute of Scientific and Technical Information of China (English)

    魏辽; 韩峰; 陈涛; 郭朝辉; 朱玉杰

    2014-01-01

    为准确分析套管固井滑套长时间在固液两相流中冲蚀后的磨损情况及可靠性,在进行冲蚀理论分析和数值模拟的基础上,利用研制的冲蚀磨损试验装置,研究了特定工况下固井滑套带孔短节的冲蚀磨损情况,分析了滑套孔眼冲蚀磨损速率与孔眼数量、砂比及排量的关系,建立了冲蚀磨损速率新模型,研究了滑套带孔短节孔眼过流能力与冲蚀磨损速率的关系;同时,结合数值分析结果和试验数据,得到了A型材质滑套短节的冲蚀磨损系数。研究结果表明,当滑套孔眼为2个时,含砂流体对滑套孔眼周边的冲蚀磨损较为明显,且滑套孔眼冲蚀磨损速率与砂比呈线性关系,与排量呈指数关系。该研究结果可为套管固井滑套可靠性评估提供理论依据,且能够指导滑套压裂工具的现场应用。%In order to analyze the wear rate and reliability of cementing sliding sleeve after high dis-charge ,high sand-fluid ratio and long-term erosion of solid-liquid flow ,downhole tools’ erosion and wear were researched based on the erosion theory and numerical simulation .The effects of the number of ports , sand concentration and displacement on the wear rate were analyzed .New test equipment was designed and built to test the erosion wear of port collar of cementing sliding sleeve under certain working conditions .A new model of erosion rate was established and more research was conducted about the flow capacity of port collar of cementing sliding sleeve and its effect on the rate of erosion wear .By combining numerical analysis and test data ,the erosion coefficient of cementing sliding sleeve made by type A material was obtained .Re-sults showed that the hole erosion was more severe when the cementing sliding sleeve contains two holes . The erosion rate had a linear relationship with sand concentration and an exponential relationship with fluid displacement .T his research

  10. Crystallization and preliminary X-ray analysis of Chandipura virus glycoprotein G.

    Science.gov (United States)

    Baquero, Eduard; Buonocore, Linda; Rose, John K; Bressanelli, Stéphane; Gaudin, Yves; Albertini, Aurélie A

    2012-09-01

    Fusion in members of the Rhabdoviridae virus family is mediated by the G glycoprotein. At low pH, the G glycoprotein catalyzes fusion between viral and endosomal membranes by undergoing a major conformational change from a pre-fusion trimer to a post-fusion trimer. The structure of the G glycoprotein from vesicular stomatitis virus (VSV G), the prototype of Vesiculovirus, has recently been solved in its trimeric pre-fusion and post-fusion conformations; however, little is known about the structural details of the transition. In this work, a soluble form of the ectodomain of Chandipura virus G glycoprotein (CHAV G(th)) was purified using limited proteolysis of purified virus; this soluble ectodomain was also crystallized. This protein shares 41% amino-acid identity with VSV G and thus its structure could provide further clues about the structural transition of rhabdoviral glycoproteins induced by low pH. Crystals of CHAV G(th) obtained at pH 7.5 diffracted X-rays to 3.1 Å resolution. These crystals belonged to the orthorhombic space group P2(1)2(1)2, with unit-cell parameters a = 150.3, b = 228.2, c = 78.8 Å. Preliminary analysis of the data based on the space group and the self-rotation function indicated that there was no trimeric association of the protomers. This unusual oligomeric status could result from the presence of fusion intermediates in the crystal.

  11. Preliminary uncertainty analysis of OECD/UAM benchmark for the TMI-1 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, Fabiano S.; Faria, Rochkhudson B.; Silva, Lucas M.C.; Pereira, Claubia; Fortini, Angela, E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear

    2015-07-01

    Nowadays the demand from nuclear research centers for safety, regulation and better-estimated predictions provided with confidence bounds has been increasing. On that way, studies have pointed out that present uncertainties in the nuclear data should be significantly reduced, to get the full benefit from the advanced modeling and simulation initiatives. The major outcome of NEA/OECD (UAM) workshop took place Italy on 2006, was the preparation of a benchmark work program with steps (exercises) that would be needed to define the uncertainty and modeling tasks. On that direction, this work was performed within the framework of UAM Exercise 1 (I-1) 'Cell Physics' to validate the study, and to be able estimated the accuracies of the model. The objectives of this study were to make a preliminary analysis of criticality values of TMI-1 PWR and the biases of the results from two different nuclear codes multiplication factor. The range of the bias was obtained using the deterministic codes: NEWT (New ESC-based Weighting Transport code), the two-dimensional transport module that uses AMPX-formatted cross-sections processed by other SCALE; and WIMSD5 (Winfrith Improved Multi-Group Scheme) code. The WIMSD5 system consists of a simplified geometric representation of heterogeneous space zones that are coupled with each other and with the boundaries, while the properties of each spacing element are obtained from Carlson DSN method or Collision Probability method. (author)

  12. Global volcanic earthquake swarm database and preliminary analysis of volcanic earthquake swarm duration

    Directory of Open Access Journals (Sweden)

    S. R. McNutt

    1996-06-01

    Full Text Available Global data from 1979 to 1989 pertaining to volcanic earthquake swarms have been compiled into a custom-designed relational database. The database is composed of three sections: 1 a section containing general information on volcanoes, 2 a section containing earthquake swarm data (such as dates of swarm occurrence and durations, and 3 a section containing eruption information. The most abundant and reliable parameter, duration of volcanic earthquake swarms, was chosen for preliminary analysis. The distribution of all swarm durations was found to have a geometric mean of 5.5 days. Precursory swarms were then separated from those not associated with eruptions. The geometric mean precursory swarm duration was 8 days whereas the geometric mean duration of swarms not associated with eruptive activity was 3.5 days. Two groups of precursory swarms are apparent when duration is compared with the eruption repose time. Swarms with durations shorter than 4 months showed no clear relationship with the eruption repose time. However, the second group, lasting longer than 4 months, showed a significant positive correlation with the log10 of the eruption repose period. The two groups suggest that different suites of physical processes are involved in the generation of volcanic earthquake swarms.

  13. In situ fluidization for peat bed rupture, and preliminary economic analysis.

    Science.gov (United States)

    Niven, R K; Khalili, N

    2002-11-01

    This study concerns in situ fluidization (ISF), a new remediation method with potential application to the remediation of NAPL and heavy metal contaminants, by their release from the fluidized zone generated by a water jet. The present study examines the effect of ISF on layers of peat, of significance owing to its role as an important NAPL and metal contaminant trap. Once trapped, such contaminants are not readily accessible by most remedial methods, due to the low permeability and diffusivity of the peat. A simple tank experiment is used to demonstrate rupture of a peat layer by ISF, with removal of the peat as elutriated fines and segregated peat chunks. The application of ISF in the field is then examined by three field trials in uncontaminated sands, in both saturated and unsaturated conditions. Fluidized depths of up to 1.9 m in the saturated zone (with refusal on a peat layer) and 2.5 m in the unsaturated zone (no refusal) were attained, using a 1.9-m-long, 50 mm diameter jet operated at 5-13 1 s(-1). Pulses of dark turbidity and shell fragments in the effluent indicated the rupture of peat and shelly layers. The experiments demonstrate the hydraulic viability of ISF in the field, and its ability to remove peat-based contaminants. The issues of appropriate jet design and water generation during ISF are discussed, followed by a preliminary economic analysis of ISF relative to existing remediation methods.

  14. Cloning, expression, crystallization and preliminary X-ray data analysis of norcoclaurine synthase from Thalictrum flavum

    Energy Technology Data Exchange (ETDEWEB)

    Pasquo, Alessandra [ENEA Casaccia Research Centre, Dipartimento BIOTEC, Sezione Genetica e Genomica Vegetale, PO Box 2400, I-00100 Rome (Italy); Bonamore, Alessandra; Franceschini, Stefano; Macone, Alberto; Boffi, Alberto; Ilari, Andrea, E-mail: andrea.ilari@uniroma1.it [Istituto di Biologia e Patologia Molecolari, CNR (IBPM) and Department Of Biochemical Sciences, University of Roma ‘La Sapienza’, Piazza Aldo Moro 5, 00179 Roma (Italy); ENEA Casaccia Research Centre, Dipartimento BIOTEC, Sezione Genetica e Genomica Vegetale, PO Box 2400, I-00100 Rome (Italy)

    2008-04-01

    The cloning, expression, crystallization and preliminary X-ray data analysis of norcoclaurine synthase from T. flavum, a protein which catalyzes the first committed step in the biosynthesis of benzylisoquinoline alkaloids, are reported. Norcoclaurine synthase (NCS) catalyzes the condensation of 3,4-dihydroxyphenylethylamine (dopamine) and 4-hydroxyphenylacetaldehyde (4-HPAA) as the first committed step in the biosynthesis of benzylisoquinoline alkaloids in plants. The protein was cloned, expressed and purified. Crystals were obtained at 294 K by the hanging-drop vapour-diffusion method using ammonium sulfate and sodium chloride as precipitant agents and diffract to better than 3.0 Å resolution using a synchrotron-radiation source. The crystals belong to the trigonal space group P3{sub 1}21, with unit-cell parameters a = b = 86.31, c = 118.36 Å. A selenomethionine derivative was overexpressed, purified and crystallized in the same space group. A complete MAD data set was collected at 2.7 Å resolution. The model is under construction.

  15. Acanthamoeba polyphaga mimivirus NDK: preliminary crystallographic analysis of the first viral nucleoside diphosphate kinase

    Energy Technology Data Exchange (ETDEWEB)

    Jeudy, Sandra [Information Génomique et Structurale, CNRS UPR 2589, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France); Coutard, Bruno [Architecture et Fonction des Macromolecules Biologiques, CNRS UMR 6098, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France); Lebrun, Régine [IBSM, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France); Abergel, Chantal, E-mail: chantal.abergel@igs.cnrs-mrs.fr [Information Génomique et Structurale, CNRS UPR 2589, 31 Chemin Joseph Aiguier, 13402 Marseille CEDEX 20 (France)

    2005-06-01

    A. polyphaga mimivirus, the largest known double-stranded DNA virus, is the first virus to exhibit a nucleoside diphosphate kinase gene. The expression and crystallization of the viral NDK are reported. The complete sequence of the largest known double-stranded DNA virus, Acanthamoeba polyphaga mimivirus, has recently been determined [Raoult et al. (2004 ▶), Science, 306, 1344–1350] and revealed numerous genes not expected to be found in a virus. A comprehensive structural and functional study of these gene products was initiated [Abergel et al. (2005 ▶), Acta Cryst. F61, 212–215] both to better understand their role in the virus physiology and to obtain some clues to the origin of DNA viruses. Here, the preliminary crystallographic analysis of the viral nucleoside diphosphate kinase protein is reported. The crystal belongs to the cubic space group P2{sub 1}3, with unit-cell parameter 99.425 Å. The self-rotation function confirms that there are two monomers per asymmetric unit related by a twofold non-crystallographic axis and that the unit cell thus contains four biological entities.

  16. N-Acetyltransferase 2 status and gastric cancer risk: a preliminary meta-analysis

    Directory of Open Access Journals (Sweden)

    Stefania Boccia

    2005-03-01

    Full Text Available

    In recent studies N- Acetyltransferase 2 (NAT2 genotype has been considered as a risk factor for developing gastric cancer, however with conflicting results among Asian and Caucasian populations. In order to clarify the influence of NAT2 slow acetylation status on gastric cancer risk, a preliminary meta-analysis of published case-control studies was undertaken.

    The primary outcome measure was the odds ratio (OR for the risk of gastric cancer associated with the NAT2 slow genotype using a random effects model. Pooling the results from the 5 studies identified (771 cases, 1083 controls, an overall OR for gastric cancer risk associated with the NAT2 slow genotype of 0.91 emerged (95% CI: 0.54-1.55.

    The result suggests that the NAT2 slow genotype has probably no effect on the risk of gastric cancer. Additional epidemiological studies, based on sample sizes that are commensurate with the detection of small genotypic risks, are required to confirm these findings. Future studies may also help to clarify whether geographic differences exist.

  17. Preliminary Analysis of Two Years of the Massive Collision Monitoring Activity

    Science.gov (United States)

    McKnight, Darren; Matney, Mark; Walbert, Kris; Behrend, Sophie; Casey, Patrick; Speaks, Seth

    2017-01-01

    It is hypothesized that the interactions between many of the most massive derelicts in low Earth orbit are more frequent than modeled by the traditional combination of kinetic theory of gases and Poisson probability distribution function. This is suggested by the fact that there are clusters of derelicts where members' inclinations are nearly identical and their apogees/perigees overlap significantly resulting in periodic synchronization of the objects' orbits. In order to address this proposition, an experiment was designed and conducted over the last two years. Results from this monitoring and characterization experiment are presented with implications for proposed debris remediation strategies. Four separate clusters of massive derelicts were examined that are centered around 775km, 850km, 975km, and 1500km, respectively. In aggregate, the constituents of these clusters contain around 500 objects and about 800,000kg of mass; this equates to a third of all derelict mass in LEO. Preliminary analysis indicates that encounter rates over this time period for these objects are greater than is estimated by traditional techniques. Hypothesized dependencies between latitude of encounter, relative velocity, frequency of encounters, inclination, and differential semi-major axis were established and verified. This experiment also identified specific repeatable cluster dynamics that may reduce the cost/risk and enhance the effectiveness of debris remediation activities and also enable new operational debris remediation options.

  18. GC-MS Analysis and Preliminary Antimicrobial Activity of Albizia adianthifolia (Schumach and Pterocarpus angolensis (DC

    Directory of Open Access Journals (Sweden)

    Mustapha N. Abubakar

    2016-01-01

    Full Text Available The non-polar components of two leguminoceae species Albizia adianthifolia (Schumach, and Pterocarpus angolensis (DC were investigated. GC-MS analysis of the crude n-hexane and chloroform extracts together with several chromatographic separation techniques led to the identification and characterization (using NMR of sixteen known compounds from the heartwood and stem bark of Albizia adianthifolia and Pterocarpus angolensis respectively. These constituents include, n-hexadecanoic acid (palmitic acid 1, oleic acid 2, chondrillasterol 3, stigmasterol 4, 24S 5α-stigmast-7-en-3β-ol 5, 9,12-octadecadienoic acid (Z,Z-, methyl ester 6, trans-13-octadecanoic acid, methyl ester 7, tetradecanoic acid 8, hexadecanoic acid, methyl ester 9, octadecanoic acid 10, tetratriacontane 11, 7-dehydrodiosgenin 12, lupeol 13, stigmasta-3,5-diene-7-one 14, friedelan-3-one (friedelin 15, and 1-octacosanol 16. Using agar over lay method, the preliminary antimicrobial assay for the extracts was carried out against bacterial (E. coli, P. aeruginosa, B. subtilis, S. aueus and a fungus/yeast (C. albicans strains. The n-hexane and chloroform extracts of A. adianthifolia showed the best activity against E. coli with minimum inhibition quantity (MIQ of 1 µg each while the remaining exhibited moderate-to-weak activity against the test microorganisms.

  19. Satellite geological and geophysical remote sensing of Iceland: Preliminary results from analysis of MSS imagery

    Science.gov (United States)

    Williams, R. S., Jr.; Boedvarsson, A.; Fridriksson, S.; Palmason, G.; Rist, S.; Sigtryggsson, H.; Thorarinsson, S.; Thorsteinsson, I.

    1973-01-01

    A binational, multidisciplinary research effort in Iceland is directed at an analysis of MSS imagery from ERTS-1 to study a variety of geologic, hydrologic, oceanographic, and agricultural phenomena. A preliminary evaluation of available MSS imagery of Iceland has yielded several significant results - some of which may have direct importance to the Icelandic economy. Initial findings can be summarized as follows: (1) recent lava flows can be delineated from older flows at Askja and Hekla; (2) MSS imagery from ERTS-1 and VHRR visible and infrared imagery from NOAA-2 recorded the vocanic eruption on Heimaey, Vestmann Islands; (3) coastline changes, particularly changes in the position of bars and beaches along the south coast are mappable; and (4) areas covered with new and residual snow can be mapped, and the appearance of newly fallen snow on ERTS-1, MSS band 7 appears dark where it is melting. ERTS-1 imagery provides a means of updating various types of maps of Iceland and will permit the compilation of special maps specifically aimed at those dynamic environmental phenomena which impact on the Icelandic economy.

  20. Analysis of the preliminary optical links between ARTEMIS and the Optical Ground Station

    Science.gov (United States)

    Reyes Garcia-Talavera, Marcos; Chueca, Sergio; Alonso, Angel; Viera, Teodora; Sodnik, Zoran

    2002-12-01

    In the frame of the SILEX project, the European Space Agency (ESA) has put into orbit two Laser Communication Terminals, to establish an experimental free space optical communication link between a GEO satellite (ARTEMIS) and a LEO satellite (SPOT IV), to relay earth observation data. In order to perform In Orbit Testing (IOT) of these, and other, optical communications systems, ESA and the Instituto de Astrofisica de Canarias (IAC) reached an agreement for building the Optical Ground Station (OGS), in the Teide Observatory of the IAC. With ARTEMIS placed in a circular parking orbit at about 31000 kilometres, its optical payload has been preliminary tested with the OGS. First results and analysis are presented on the space-to-ground bi-directional link, including pointing acquisition and tracking performance, Bit-Error Rate (BER) and transmitted beam divergence effects related with atmospheric models and predictions. Future plans include deeper optical bi-directional communication tests of OGS, not only with ARTEMIS but also with OSCAR-40 (downlink) and SMART-1 (up-link) satellites, in order to do a full characterisation of the performances of laser beam propagation through atmospheric turbulence and a comparison with theoretical predictions.

  1. Marine Traffic Density Over Port Klang, Malaysia Using Statistical Analysis of AIS Data: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Masnawi MUSTAFFA

    2016-12-01

    Full Text Available Port Klang Malaysia is the 13th busiest port in the world, the capacity at the port expected to be able to meet the demand until 2018. It is one of the busiest ports in the world and also the busiest port in Malaysia. Even though there are statistics published by Port Klang Authority showing that a lot of ships using this port, this number is only based on ships that entering Port Klang. Therefore, no study has been done to investigate on how dense the traffic is in Port Klang, Malaysia the surrounding sea including Strait of Malacca . This paper has investigated on traffic density over Port Klang Malaysia and its surrounding sea using statistical analysis from AIS data. As a preliminary study, this study only collected AIS data for 7 days to represent daily traffic weekly. As a result, an hourly number of vessels, daily number of vessels, vessels classification and sizes and also traffic paths will be plotted.

  2. GC-MS Analysis and Preliminary Antimicrobial Activity of Albizia adianthifolia (Schumach) and Pterocarpus angolensis (DC).

    Science.gov (United States)

    Abubakar, Mustapha N; Majinda, Runner R T

    2016-01-28

    The non-polar components of two leguminoceae species Albizia adianthifolia (Schumach), and Pterocarpus angolensis (DC) were investigated. GC-MS analysis of the crude n-hexane and chloroform extracts together with several chromatographic separation techniques led to the identification and characterization (using NMR) of sixteen known compounds from the heartwood and stem bark of Albizia adianthifolia and Pterocarpus angolensis respectively. These constituents include, n-hexadecanoic acid (palmitic acid) 1, oleic acid 2, chondrillasterol 3, stigmasterol 4, 24S 5α-stigmast-7-en-3β-ol 5, 9,12-octadecadienoic acid (Z,Z)-, methyl ester 6, trans-13-octadecanoic acid, methyl ester 7, tetradecanoic acid 8, hexadecanoic acid, methyl ester 9, octadecanoic acid 10, tetratriacontane 11, 7-dehydrodiosgenin 12, lupeol 13, stigmasta-3,5-diene-7-one 14, friedelan-3-one (friedelin) 15, and 1-octacosanol 16. Using agar over lay method, the preliminary antimicrobial assay for the extracts was carried out against bacterial (E. coli, P. aeruginosa, B. subtilis, S. aueus) and a fungus/yeast (C. albicans) strains. The n-hexane and chloroform extracts of A. adianthifolia showed the best activity against E. coli with minimum inhibition quantity (MIQ) of 1 µg each while the remaining exhibited moderate-to-weak activity against the test microorganisms.

  3. Bioinformatics analysis of the gene expression profile of hepatocellular carcinoma: preliminary results

    Science.gov (United States)

    Li, Jia

    2016-01-01

    Aim of the study To analyse the expression profile of hepatocellular carcinoma compared with normal liver by using bioinformatics methods. Material and methods In this study, we analysed the microarray expression data of HCC and adjacent normal liver samples from the Gene Expression Omnibus (GEO) database to screen for differentially expressed genes. Then, functional analyses were performed using GenCLiP analysis, Gene Ontology categories, and aberrant pathway identification. In addition, we used the CMap database to identify small molecules that can induce HCC. Results Overall, 2721 differentially expressed genes (DEGs) were identified. We found 180 metastasis-related genes and constructed co-occurrence networks. Several significant pathways, including the transforming growth factor β (TGF-β) signalling pathway, were identified as closely related to these DEGs. Some candidate small molecules (such as betahistine) were identified that might provide a basis for developing HCC treatments in the future. Conclusions Although we functionally analysed the differences in the gene expression profiles of HCC and normal liver tissues, our study is essentially preliminary, and it may be premature to apply our results to clinical trials. Further research and experimental testing are required in future studies. PMID:27095935

  4. Occupant evaluation of commercial office lighting: Volume 2, Preliminary data analysis

    Energy Technology Data Exchange (ETDEWEB)

    Marans, R.W.; Brown, M.A. (ed.)

    1987-11-01

    This report presents the preliminary results of a post-occupancy evaluation of office lighting environments. It explores the relationship between quantitative measures of lighting in occupied environments and qualitative measures related to occupant satisfaction. The report analyzes several types of data from more than 1000 occupied work stations: subjective data on attitudes and ratings of selected lighting and other characteristics, photometric and other direct environmental data, including illuminances, luminances, and contrast conditions, indirect environmental measures obtained from the architectural drawings and the work station photographs, and descriptive characteristics of the occupants. The work stations were sampled from thirteen office buildings located in various cities in the United States. Many tentative findings emerged from the analysis, including the following: (1) within the range of values examined here, there is a tendency for lighting satisfaction to decrease as lighting power density increases; (2) occupants who described their work station spaces as bright also tended to be satisfied with their work station lighting; (3) occupants who were most bothered by bright lights and glare were most likely to express dissatisfaction with the lighting at their work stations; (4) there is no relationship between work-related activities of employees and indicators of lighting quality. More research is needed before firm conclusions can be drawn and before guidance regarding lighting standards and other policy issues can be derived. 3 refs., 9 figs.

  5. Hydrothermal Liquefaction and Upgrading of Municipal Wastewater Treatment Plant Sludge: A Preliminary Techno-Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Snowden-Swan, Lesley J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhu, Yunhua [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Susanne B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schmidt, Andrew J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hallen, Richard T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Billing, Justin M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Todd R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fox, Samuel P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Maupin, Gary D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-06-08

    A preliminary process model and techno-economic analysis (TEA) was completed for fuel produced from hydrothermal liquefaction (HTL) of sludge waste from a municipal wastewater treatment plant (WWTP) and subsequent biocrude upgrading. The model is adapted from previous work by Jones et al. (2014) for algae HTL, using experimental data generated in fiscal year 2015 (FY15) bench-scale HTL testing of sludge waste streams. Testing was performed on sludge samples received from MetroVancouver’s Annacis Island WWTP (Vancouver, B.C.) as part of a collaborative project with the Water Environment and Reuse Foundation (WERF). The full set of sludge HTL testing data from this effort will be documented in a separate report to be issued by WERF. This analysis is based on limited testing data and therefore should be considered preliminary. Future refinements are necessary to improve the robustness of the model, including a cross-check of modeled biocrude components with the experimental GCMS data and investigation of equipment costs most appropriate at the smaller scales used here. Environmental sustainability metrics analysis is also needed to understand the broader impact of this technology pathway. The base case scenario for the analysis consists of 10 HTL plants, each processing 100 dry U.S. ton/day (92.4 ton/day on a dry, ash-free basis) of sludge waste and producing 234 barrel per stream day (BPSD) biocrude, feeding into a centralized biocrude upgrading facility that produces 2,020 barrel per standard day of final fuel. This scale was chosen based upon initial wastewater treatment plant data collected by the resource assessment team from the EPA’s Clean Watersheds Needs Survey database (EPA 2015a) and a rough estimate of what the potential sludge availability might be within a 100-mile radius. In addition, we received valuable feedback from the wastewater treatment industry as part of the WERF collaboration that helped form the basis for the selected HTL and upgrading

  6. Early diagnosis of teeth erosion using polarized laser speckle imaging

    Science.gov (United States)

    Nader, Christelle Abou; Pellen, Fabrice; Loutfi, Hadi; Mansour, Rassoul; Jeune, Bernard Le; Brun, Guy Le; Abboud, Marie

    2016-07-01

    Dental erosion starts with a chemical attack on dental tissue causing tooth demineralization, altering the tooth structure and making it more sensitive to mechanical erosion. Medical diagnosis of dental erosion is commonly achieved through a visual inspection by the dentist during dental checkups and is therefore highly dependent on the operator's experience. The detection of this disease at preliminary stages is important since, once the damage is done, cares become more complicated. We investigate the difference in light-scattering properties between healthy and eroded teeth. A change in light-scattering properties is observed and a transition from volume to surface backscattering is detected by means of polarized laser speckle imaging as teeth undergo acid etching, suggesting an increase in enamel surface roughness.

  7. Brook trout (Salvelinus fontinalis extinction in small boreal lakes revealed by ephippia pigmentation: a preliminary analysis

    Directory of Open Access Journals (Sweden)

    Alexandre Bérubé Tellier

    2016-12-01

    Full Text Available Ephippium pigmentation is a plastic trait which can be related to a trade-off between visual predation pressure and better protection of cladoceran eggs against different types of stress. Experimental studies showed that planktivorous fish exert a greater predation pressure on individuals carrying darker ephippia, but little is known about the variation of ephippium pigmentation along gradients of fish predation pressure in natural conditions. For this study, our experimental design included four small boreal lakes with known fish assemblages. Two of the lakes have viable brook trout (Salvelinus fontinalis populations, whereas the other two lakes experienced brook trout extinctions during the 20th century. Cladoceran ephippia were extracted from sediment cores at layers corresponding to the documented post- extinction phase (1990's and from an older layer (1950's for which the brook trout population status is not known precisely. Our first objective was to determine whether brook trout extinction has a direct effect on both ephippium pigmentation and size. Our second objective was to give a preliminary assessment of the status of brook trout populations in the 1950's by comparing the variation in ephippia traits measured from this layer to those measured in the 1990's, for which the extinction patterns are well known. Cost-effective image analysis was used to assess variation in pigmentation levels in ephippia. This approach provided a proxy for the amount of melanin invested in each ephippium analysed. Our study clearly shows that ephippium pigmentation may represent a better indicator of the presence of fish predators than ephippium size, a trait that showed a less clear pattern of variation between lakes with and without fish. For the 1990's period, ephippia from fishless lakes were darker and showed a slight tendency to be larger than ephippia from lakes with brook trout. However, no clear differences in either ephippium size or pigmentation

  8. Field Assessment Techniques for Bank Erosion Modeling

    Science.gov (United States)

    1990-11-22

    Field Assessment Techniques for Bank Erosion Modeling First Interim Report Prepared for US Army European Research Office US AR DS G-. EDISON HOUSE...SEDIMENTATION ANALYSIS SHEETS and GUIDELINES FOR THE USE OF SEDIMENTATION ANALYSIS SHEETS IN THE FIELD Prepared for US Army Engineer Waterways Experiment...Material Type 3 Material Type 4 Cobbles Toe[’ Toe Toefl Toefl Protection Status Cobbles/boulders Mid-Bnak .. Mid-na.k Mid-Bnask[ Mid-Boak

  9. Monitoring soil erosion in terraced catchments in Mediterranean regions: a field experiment in Cyprus

    Science.gov (United States)

    Camera, Corrado; Djuma, Hakan; Zoumides, Christos; Eliades, Marinos; Bruggeman, Adriana; Abate, Dante; Faka, Marina; Hermon, Sorin

    2016-04-01

    monitored by sediment traps is performed. The scan produces a point cloud with a resolution close to 2 mm. The comparison of the 3D models derived in different times allows detecting changes in the terrain topography, which can be transformed in to erosion rates knowing the soil bulk density. The preliminary results of the monitoring experiment, which started at the beginning of November 2015, show erosion rates an order of magnitude higher in the collapsed sections of the terrace wall in comparison to the preserved ones. A more comprehensive analysis relating erosion rates to precipitation intensity, assessing yearly erosion rates in degraded terraced environments and comparing different monitoring techniques are expected at the end of the rainy season (April).

  10. Spatial patterns of catchment erosion on the Rio Grande Rift margin, Guadalupe Mountains, Texas and New Mexico

    Science.gov (United States)

    Tranel, L. M.; Schaefer, K.; Happel, A. A.; Rothschild, T. J.

    2016-12-01

    The escarpments of the Guadalupe Mountains serve as distinct landmarks to travelers across the southern US, but they also reflect the eastern boundary of the Rio Grande Rift. As the geoscience community continues to investigate how surface and mantle processes interact, the Guadalupe Mountains provide a valuable landscape to test if and how surface features capture mantle processes at the outer limits of extension. Although the rocks of the Guadalupe Mountains have been well studied for their relationship to petroleum sources and reservoirs, recent faulting and sediment production via erosion is less well understood. This study investigates the timing and spatial distribution of catchment erosion to investigate the spatial variability of erosional and tectonic influences. Analysis of topographic features suggests that eastern catchments are older features that formed prior to initiation of extension in the region. Therefore, we expect erosion rates to be slower in eastern catchments than the more recently exposed catchments to the west. Based on the typical evolution and propagation of normal faults, we also expect faster erosion rates in the center of the range than at the northern or southern ends. In this study, we use catchment averaged erosion rates from a combination of digital elevation models and cosmogenic radionuclides (CRN) to assess spatial variability across the range and along the western escarpment. CRN concentrations suggest erosion may be faster in catchments draining to the east. This could be related to a larger catchment area capturing more rainfall in ephermeral stream systems, and therefore providing more stream power to effectively erode bedrock. Volumetric analyses of catchments throughout the Guadalupe Mountains indicate that the greatest volume of sediment was eroded from catchments at the southern end of the range. The largest catchments drain east, however where faults are mapped, larger catchments formed near complex fault arrays to the

  11. Preliminary Analysis of Effects of Reduced Discharge onThermal Habitat of Pedersen Warm Springs Channel

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A preliminary report to study the potential impacts of possible flow reductions in thermal spring systems located in the Warm Springs area of Moapa Valley NWR on the...

  12. Dynamic Study of Soil Erosion in Greater Khingan Forest

    Directory of Open Access Journals (Sweden)

    Wei Li

    2015-04-01

    Full Text Available Based on the amended model of RUSLE universal soil loss equation and GIS technology, combined with the natural geographical features of Great Khingan, it has conducted quantitative analysis of the factor in Soil loss equation. Uses 2000 and 2010 years TM images classification are land uses/cover type figure, we gets all factors values of space distribution in the RUSLE model, gets soil erosion volume estimates data and soil erosion strength distribution figure based on grid cell data and obtained Great Khingan soil erosion strength grade distribution figure and through the terrain niche index and spatial center of gravity transfer model theory, revealed soil erosion in the temporal and spatial evolution of Greater Khingan in 11 years. Study results indicate that during the 2000 and 2010 period, the amount of soil erosion in Greater Khingan shown overall upward trend, the slightly erosion area is reduced, the low erosion area is increased, several other types of erosion intensity had no obvious change.

  13. Estimating overland flow erosion capacity using unit stream power

    Institute of Scientific and Technical Information of China (English)

    Hui-Ming SHIH; Chih Ted YANG

    2009-01-01

    Soil erosion caused by water flow is a complex problem.Both empirical and physically based approaches were used for the estimation of surface erosion rates.Their applications are mainly limited to experimental areas or laboratory studies.The maximum sediment concentration overland flow can carry is not considered in most of the existing surface erosion models.The lack of erosion capacity limitation may cause over estimations of sediment concentration.A correlation analysis is used in this study to determine significant factors that impact surface erosion capacity.The result shows that the unit stream power is the most dominant factor for overland flow erosion which is consistent with experimental data.A bounded regression formula is used to reflect the limits that sediment concentration cannot be less than zero nor greater than a maximum value.The coefficients used in the model are calibrated using published laboratory data.The computed results agree with laboratory data very well.A one dimensional overland flow diffusive wave model is used in conjunction with the developed soil erosion equation to simulate field experimental results.This study concludes that the non-linear regression method using unit stream power as the dominant factor performs well for estimating overland flow erosion capacity.

  14. Pharmacognostic and Preliminary Phytochemical Analysis of Sauropus androgynus (L) Merr. Leaf

    OpenAIRE

    Ankad Gireesh; Hegde Harsha; Kholkute S.D; Hurkadale Pramod

    2013-01-01

    The leaves of Sauropus androgynus (L.) Merr. are used in traditional medicine to treat various disorders and also used as vegetable for its nutritive value. Such plant having medicinal and nutritive values lacks pharmacognostical and preliminary phytochemical information. Hence the present work is intended to study pharmacognostical and preliminary phytochemical studies, which will serve as quality control parameters. The pharmacognostical parameters like transverse section of midrib, epiderm...

  15. Volume analysis of heat-induced cracks in human molars: A preliminary study

    Directory of Open Access Journals (Sweden)

    Michael A. Sandholzer

    2014-01-01

    Full Text Available Context: Only a few methods have been published dealing with the visualization of heat-induced cracks inside bones and teeth. Aims : As a novel approach this study used nondestructive X-ray microtomography (micro-CT for volume analysis of heat-induced cracks to observe the reaction of human molars to various levels of thermal stress. Materials and Methods: Eighteen clinically extracted third molars were rehydrated and burned under controlled temperatures (400, 650, and 800°C using an electric furnace adjusted with a 25°C increase/min. The subsequent high-resolution scans (voxel-size 17.7 μm were made with a compact micro-CT scanner (SkyScan 1174. In total, 14 scans were automatically segmented with Definiens XD Developer 1.2 and three-dimensional (3D models were computed with Visage Imaging Amira 5.2.2. The results of the automated segmentation were analyzed with an analysis of variance (ANOVA and uncorrected post hoc least significant difference (LSD tests using Statistical Package for Social Sciences (SPSS 17. A probability level of P < 0.05 was used as an index of statistical significance. Results: A temperature-dependent increase of heat-induced cracks was observed between the three temperature groups (P < 0.05, ANOVA post hoc LSD. In addition, the distributions and shape of the heat-induced changes could be classified using the computed 3D models. Conclusion: The macroscopic heat-induced changes observed in this preliminary study correspond with previous observations of unrestored human teeth, yet the current observations also take into account the entire microscopic 3D expansions of heat-induced cracks within the dental hard tissues. Using the same experimental conditions proposed in the literature, this study confirms previous results, adds new observations, and offers new perspectives in the investigation of forensic evidence.

  16. Early detection of breast cancer using total biochemical analysis of peripheral blood components: a preliminary study.

    Science.gov (United States)

    Zelig, Udi; Barlev, Eyal; Bar, Omri; Gross, Itai; Flomen, Felix; Mordechai, Shaul; Kapelushnik, Joseph; Nathan, Ilana; Kashtan, Hanoch; Wasserberg, Nir; Madhala-Givon, Osnat

    2015-05-15

    Most of the blood tests aiming for breast cancer screening rely on quantification of a single or few biomarkers. The aim of this study was to evaluate the feasibility of detecting breast cancer by analyzing the total biochemical composition of plasma as well as peripheral blood mononuclear cells (PBMCs) using infrared spectroscopy. Blood was collected from 29 patients with confirmed breast cancer and 30 controls with benign or no breast tumors, undergoing screening for breast cancer. PBMCs and plasma were isolated and dried on a zinc selenide slide and measured under a Fourier transform infrared (FTIR) microscope to obtain their infrared absorption spectra. Differences in the spectra of PBMCs and plasma between the groups were analyzed as well as the specific influence of the relevant pathological characteristics of the cancer patients. Several bands in the FTIR spectra of both blood components significantly distinguished patients with and without cancer. Employing feature extraction with quadratic discriminant analysis, a sensitivity of ~90 % and a specificity of ~80 % for breast cancer detection was achieved. These results were confirmed by Monte Carlo cross-validation. Further analysis of the cancer group revealed an influence of several clinical parameters, such as the involvement of lymph nodes, on the infrared spectra, with each blood component affected by different parameters. The present preliminary study suggests that FTIR spectroscopy of PBMCs and plasma is a potentially feasible and efficient tool for the early detection of breast neoplasms. An important application of our study is the distinction between benign lesions (considered as part of the non-cancer group) and malignant tumors thus reducing false positive results at screening. Furthermore, the correlation of specific spectral changes with clinical parameters of cancer patients indicates for possible contribution to diagnosis and prognosis.

  17. Preliminary design of a small air loop for system analysis and validation of Cathare code

    Energy Technology Data Exchange (ETDEWEB)

    Marchand, M.; Saez, M.; Tauveron, N.; Tenchine, D.; Germain, T.; Geffraye, G.; Ruby, G.P. [CEA Grenoble (DEN/DER/SSTH), 38 (France)

    2007-07-01

    The French Atomic Energy Commission (Cea) is carrying on the design of a Small Air Loop for System Analysis (SALSA), devoted to the study of gas cooled nuclear reactors behaviour in normal and incidental/accidental operating conditions. The reduced size of the SALSA components compared to a full-scale reactor and air as gaseous coolant instead of Helium will allow an easy management of the loop. The main purpose of SALSA will be the validation of the associated thermal hydraulic safety simulation codes, like CATHARE. The main goal of this paper is to present the methodology used to define the characteristics of the loop. In a first step, the study has been focused on a direct-cycle system for the SALSA loop with few global constraints using a similarity analysis to support the definition and design of the loop. Similarity requirements have been evaluated to determine the scale factors which have to be applied to the SALSA loop components. The preliminary conceptual design of the SALSA plant with a definition of each component has then be carried out. The whole plant has been modelled using the CATHARE code. Calculations of the SALSA steady-state in nominal conditions and of different plant transients in direct-cycle have been made. The first system results obtained on the global behaviour of the loop confirm that SALSA can be representative of a Gas-Cooled nuclear reactor with some minor design modifications. In a second step, the current prospects focus on the SALSA loop capability to reproduce correctly the heat transfer occurring in specific incidental situations. Heat decay removal by natural convection is a crucial point of interest. The first results show that the behaviour and the efficiency of the loop are strongly influenced by the definition of the main parameters for each component. A complete definition of SALSA is under progress. (authors)

  18. An evaluation of the Positive Emotional Experiences Scale: A preliminary analysis

    Directory of Open Access Journals (Sweden)

    Rene van Wyk

    2016-04-01

    Full Text Available Orientation: The positive organisational behaviour movement emphasises the advantages of psychological strengths in business. The psychological virtues of positive emotional experiences can potentially promote human strengths to the advantages of business functioning and the management of work conditions. This is supported by Fredrickson’s broaden-and-build theory that emphasises the broadening of reactive thought patterns through experiences of positive emotions.Research purpose: A preliminary psychometric evaluation of a positive measurement of dimensions of emotional experiences in the workplace, by rephrasing the Kiefer and Barclay Toxic Emotional Experiences Scale.Motivation for the study: This quantitative Exploratory Factor Analysis investigates the factorial structure and reliability of the Positive Emotional Experiences Scale, a positive rephrased version of the Toxic Emotional Experiences Scale.Research approach, design and method: This Exploratory Factor Analysis indicates an acceptable three-factor model for the Positive Emotional Experiences Scale. These three factors are: (1 psychological recurrent positive state, (2 social connectedness and (3 physical refreshed energy, with strong Cronbach’s alphas of 0.91, 0.91 and 0.94, respectively.Main findings: The three-factor model of the Positive Emotional Experiences Scale provides a valid measure in support of Fredrickson’s theory of social, physical and psychological endured personal resources that build positive emotions.Practical/Managerial implications: Knowledge gained on positive versus negative emotional experiences could be applied by management to promote endured personal resources that strengthen positive emotional experiences.Contribution/value-add: The contribution of this rephrased Positive Emotional Experiences Scale provides a reliable measure of assessment of the social, physical and endured psychological and personal resources identified in Fredrickson’s broaden

  19. Rill erosion rates in burned forests

    Science.gov (United States)

    Joseph W. Wagenbrenner; Peter R. Robichaud

    2011-01-01

    Introduction Wildfires often produce large increases in runoff and erosion rates (e.g., Moody and Martin, 2009), and land managers need to predict the frequency and magnitude of postfire erosion to determine the needs for hazard response and possible erosion mitigation to reduce the impacts of increased erosion on public safety and valued resources. The Water Erosion...

  20. Risk factors and management of vaginal mesh erosion after pelvic organ prolapse surgery.

    Science.gov (United States)

    Cheng, Yung-Wen; Su, Tsung-Hsien; Wang, Hsuan; Huang, Wen-Chu; Lau, Hui-Hsuan

    2017-04-01

    Mesh erosion is a serious and not uncommon complication in women undergoing vaginal mesh repair. We hypothesized that mesh erosion is associated with the patient's comorbidities, surgical procedures, and mesh material. The aims of this study were to identify the risk factors and optimal management for mesh erosion. All women who underwent vaginal mesh repair from 2004 to 2014 were retrospectively reviewed. Data on patients' characteristics, presenting symptoms, treatment and outcomes were collected from their medical records. A total of 741 women underwent vaginal mesh repairs, of whom 47 had mesh erosion. The median follow-up period was 13 months (range 3-84 months). Another nine patients with mesh erosion were referred form other hospitals. Multivariate analysis revealed that concomitant hysterectomy (odds ratio 27.02, 95% confidence interval 12.35-58.82; p erosion. Of these 56 women, 20 (36%) were successfully treated by conservative management, while 36 (64%) required subsequent surgical revision. Compared with surgery, conservative treatment was successful if the size of the erosion was smaller than 0.5 cm (p erosions after primary revision, but all successfully healed after the second surgery. Concomitant hysterectomy and hypertension were associated with mesh erosion. In the management of mesh erosion, conservative treatment can be tried as the first-line treatment for smaller erosions, while surgical repair for larger erosions. Recurrent erosions could happen and requires repairs several times. Copyright © 2017. Published by Elsevier B.V.

  1. Crystallization and preliminary X-ray diffraction analysis of L-threonine dehydrogenase (TDH) from the hyperthermophilic archaeon Thermococcus kodakaraensis.

    Science.gov (United States)

    Bowyer, A; Mikolajek, H; Wright, J N; Coker, A; Erskine, P T; Cooper, J B; Bashir, Q; Rashid, N; Jamil, F; Akhtar, M

    2008-09-01

    The enzyme L-threonine dehydrogenase catalyses the NAD(+)-dependent conversion of L-threonine to 2-amino-3-ketobutyrate, which is the first reaction of a two-step biochemical pathway involved in the metabolism of threonine to glycine. Here, the crystallization and preliminary crystallographic analysis of L-threonine dehydrogenase (Tk-TDH) from the hyperthermophilic organism Thermococcus kodakaraensis KOD1 is reported. This threonine dehydrogenase consists of 350 amino acids, with a molecular weight of 38 kDa, and was prepared using an Escherichia coli expression system. The purified native protein was crystallized using the hanging-drop vapour-diffusion method and crystals grew in the tetragonal space group P4(3)2(1)2, with unit-cell parameters a = b = 124.5, c = 271.1 A. Diffraction data were collected to 2.6 A resolution and preliminary analysis indicates that there are four molecules in the asymmetric unit of the crystal.

  2. - and Syn-Eruptive Surface Movements of Azerbaijan Mud Volcanoes Detected Through Insar Analysis: Preliminary Results

    Science.gov (United States)

    Antonielli, Benedetta; Monserrat, Oriol; Bonini, Marco; Righini, Gaia; Sani, Federico; Luzi, Guido; Feyzullayev, Akper; Aliyev, Chingiz

    2014-05-01

    Mud volcanism is a process that consists in the extrusion of mud, fragments or blocks of country rocks, saline waters and gases, mostly methane. This mechanism is typically linked to in-depth hydrocarbon traps, and it builds up a variety of conical edifices with dimension and morphology similar to those of magmatic volcanoes. Interferometry by Satellite Aperture Radar (InSAR) techniques have been commonly used to monitor and investigate the ground deformation connected to the eruptive phases of magmatic volcanoes. InSAR techniques have also been employed to explore the ground deformation associated with the LUSI mud volcano in Java (Indonesia). We aim to carry out a study on the paroxysmal activities of the Azerbaijan mud volcanoes, among the largest on Earth, using similar techniques. In particular the deformations of the mud volcanic systems were analyzed through the technique of satellite differential interferometry (DInSAR), thanks to the acquisition of 16 descending and 4 ascending Envisat images, spanning about 4 years (October 2003-November 2007); these data were provided by the European Space Agency. The preliminary analysis of a set of 77 interferograms and the unwrapping process elaboration of some of them selected according to the best coherence values, allowed the detection of significant deformations in correspondence of Ayaz-Akhtarma and Khara Zira Island mud volcanoes. This analysis has allowed to identify relevant ground deformations of the volcanic systems in connection with the main eruptive events in 2005 and in 2006 respectively, that are recorded by the catalogue of Azerbaijan mud volcano eruptions until 2007. The preliminary analysis of the interferograms of the Ayaz-Akhtarma and the Khara Zira mud volcanoes shows that the whole volcano edifice or part of it is subject to a ground displacement before or in coincidence with the eruption. Assuming that the movement is mainly vertical, we suppose that deformation is due to bulging of the volcanic

  3. Erosion--Corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Vyas, B.

    1978-01-01

    The deterioration of materials by corrosion or erosion by itself presents a formidable problem and for this reason investigators have studied these two phenomena independently. In fact, there are very few systematic studies on E-C and the majority of references mention it only in passing. In most real systems, however, the two destructive processes take place simultaneously, hence the purpose of this review is to present the various interactions between the chemical and mechanical agents leading to accelerated degradation of the material. The papers cited in the review are those that lead to a better understanding of the process involved in the accelerated rate of material loss under E-C conditions.

  4. Flow cytometric analysis of oil palm: a preliminary analysis for cultivars and genomic DNA alteration

    Directory of Open Access Journals (Sweden)

    Warawut Chuthammathat

    2005-12-01

    Full Text Available DNA contents of oil palm (Elaeis guineensis Jacq. cultivars were analyzed by flow cytometry using different external reference plant species. Analysis using corn (Zea mays line CE-777 as a reference plant gave the highest DNA content of oil palm (4.72±0.23 pg 2C-1 whereas the DNA content was found to be lower when using soybean (Glycine max cv. Polanka (3.77±0.09 pg 2C-1 or tomato (Lycopersicon esculentum cv. Stupicke (4.25±0.09 pg 2C-1 as a reference. The nuclear DNA contents of Dura (D109, Pisifera (P168 and Tenera (T38 cultivars were 3.46±0.04, 3.24±0.03 and 3.76±0.04 pg 2C-1 nuclei, respectively, using soybean as a reference. One haploid genome of oil palm therefore ranged from 1.56 to 1.81±109 base pairs. DNA contents from one-year-old calli and cell suspension of oil palm were found to be significantly different from those of seedlings. It thus should be noted that genomic DNA alteration occurred in these cultured tissues. We therefore confirm that flow cytometric analysis could verify cultivars, DNA content and genomic DNA alteration of oil palm using soybean as an external reference standard.

  5. Applications of Photogrammetry for Analysis of Forest Plantations. Preliminary study: Analysis of individual trees

    Science.gov (United States)

    Mora, R.; Barahona, A.; Aguilar, H.

    2015-04-01

    This paper presents a method for using high detail volumetric information, captured with a land based photogrammetric survey, to obtain information from individual trees. Applying LIDAR analysis techniques it is possible to measure diameter at breast height, height at first branch (commercial height), basal area and volume of an individual tree. Given this information it is possible to calculate how much of that tree can be exploited as wood. The main objective is to develop a methodology for successfully surveying one individual tree, capturing every side of the stem a using high resolution digital camera and reference marks with GPS coordinates. The process is executed for several individuals of two species present in the metropolitan area in San Jose, Costa Rica, Delonix regia (Bojer) Raf. and Tabebuia rosea (Bertol.) DC., each one with different height, stem shape and crown area. Using a photogrammetry suite all the pictures are aligned, geo-referenced and a dense point cloud is generated with enough detail to perform the required measurements, as well as a solid tridimensional model for volume measurement. This research will open the way to develop a capture methodology with an airborne camera using close range UAVs. An airborne platform will make possible to capture every individual in a forest plantation, furthermore if the analysis techniques applied in this research are automated it will be possible to calculate with high precision the exploit potential of a forest plantation and improve its management.

  6. Dune erosion under climate change

    NARCIS (Netherlands)

    de Winter, R.C.|info:eu-repo/dai/nl/341476935

    2014-01-01

    This PhD-thesis investigated the effect of future climate change on dune erosion in the Netherlands. At present, dune erosion occurs under a combination of large storm surge and high waves, which are both generated by a storm event. Therefore to investigate the affect of future climate change on dun

  7. Nocturnal lagophthalmos and recurrent erosion.

    Science.gov (United States)

    Sturrock, G. D.

    1976-01-01

    The symptoms and corneal changes caused by sleeping with one or both eyes open are described in 102 patients. The clinical picture is identical to that of the microform recurrent erosion. The close relationship between the micro- and macro-forms of recurrent corneal erosion suggests that the latter condition is also precipitated by nocturnal lagophthalmos. Images PMID:1268178

  8. Dune erosion under climate change

    NARCIS (Netherlands)

    de Winter, R.C.

    2014-01-01

    This PhD-thesis investigated the effect of future climate change on dune erosion in the Netherlands. At present, dune erosion occurs under a combination of large storm surge and high waves, which are both generated by a storm event. Therefore to investigate the affect of future climate change on dun

  9. Dune erosion during storm surges

    NARCIS (Netherlands)

    Van Thiel de Vries, J.S.M.

    2009-01-01

    Large parts of The Netherlands are protected from flooding by a narrow strip of sandy beaches and dunes. The aim of this thesis is to extend the existing knowledge of dune erosion during storm surges as it occurs along the Dutch coast. The thesis discusses: • A large scale dune erosion experiment to

  10. The erosive potential of lollipops

    NARCIS (Netherlands)

    Brand, H.S.; Gambon, D.L.; Paap, A.; Bulthuis, M.S.; Veerman, E.C.I.; Nieuw Amerongen, A.V.

    2009-01-01

    Aim: To determine the erosive potential of several commercially available lollipops and the protective effect of saliva. Methods: The erosive potential of lollipops was determined in vitro by measuring the pH and neutralisable acidity. Subsequently, 10 healthy volunteers tested different types of lo

  11. Monitoring stream bluff erosion using repeat terrestrial laser scanning

    Science.gov (United States)

    Neitzel, G.; Gran, K. B.

    2012-12-01

    Terrestrial laser scanning (TLS) technology provides high-resolution topographic data that can be used to detect geomorphic change in fluvial environments. In this study, we utilize successive terrestrial laser scans to investigate the relationship between peak flow rates and stream bluff erosion in the Amity Creek watershed in Duluth, Minnesota. We also combine TLS scan results with bluff inventories from airborne lidar to estimate the volume of sediment erosion from bluffs in the watershed, which is an important source of fine sediment contributing to the creek's turbidity impairment. We selected nine study bluffs to conduct terrestrial laser scans on after all significant flood events over a two-year time period. The study employs a Faro Focus 3D phase-shift laser to collect data. Post-processing of the TLS-point cloud data sets involves: (1) removal of vegetation and objects other than the erosional surface of interest; (2) decimation of the point cloud in PC Tools and extraction of zmin values to produce a data set manageable in GIS; (3) creation of a bare earth digital elevation model (DEM) for each set of scans using ArcMap; and (4) utilization of Geomorphic Change Detection (GCD) software to generate DEMs of Difference (DODs) from subsequent terrestrial laser scans. Preliminary results from three flooding events indicate significant erosional activity at all field sites. Slumps were observed at two bluffs following spring melt and freeze/thaw cycling. Two major precipitation events in late spring and early summer provided a unique opportunity to observe the impact of extreme high flow events on bluff erosion throughout the watershed using TLS technology. 4.75 inches of intermittent rain over a six-day period in late May 2012 (May 23-28) resulted in slumping at many bluffs and one major failure. The ≥100-year flood that occurred on June 19-20 (7.25 inches), 2012 was powerful enough to induce considerable channel change. Slumps occurred at six study sites

  12. The Monitoring Erosion of Agricultural Land and spatial database of erosion events

    Science.gov (United States)

    Kapicka, Jiri; Zizala, Daniel

    2013-04-01

    In 2011 originated in The Czech Republic The Monitoring Erosion of Agricultural Land as joint project of State Land Office (SLO) and Research Institute for Soil and Water Conservation (RISWC). The aim of the project is collecting and record keeping information about erosion events on agricultural land and their evaluation. The main idea is a creation of a spatial database that will be source of data and information for evaluation and modeling erosion process, for proposal of preventive measures and measures to reduce negative impacts of erosion events. A subject of monitoring is the manifestations of water erosion, wind erosion and slope deformation in which cause damaged agriculture land. A website, available on http://me.vumop.cz, is used as a tool for keeping and browsing information about monitored events. SLO employees carry out record keeping. RISWC is specialist institute in the Monitoring Erosion of Agricultural Land that performs keeping the spatial database, running the website, managing the record keeping of events, analysis the cause of origins events and statistical evaluations of keeping events and proposed measures. Records are inserted into the database using the user interface of the website which has map server as a component. Website is based on database technology PostgreSQL with superstructure PostGIS and MapServer UMN. Each record is in the database spatial localized by a drawing and it contains description information about character of event (data, situation description etc.) then there are recorded information about land cover and about grown crops. A part of database is photodocumentation which is taken in field reconnaissance which is performed within two days after notify of event. Another part of database are information about precipitations from accessible precipitation gauges. Website allows to do simple spatial analysis as are area calculation, slope calculation, percentage representation of GAEC etc.. Database structure was designed

  13. Understanding the erosion of semi-arid landscapes subject to vegetation change: a combined approach using monitoring, isotope and {sup 1}4c analysis

    Energy Technology Data Exchange (ETDEWEB)

    Brazier, R. E.; Turbull, L.; Bol, R.; Dixon, L.; Wainwright, J.

    2009-07-01

    The degradation of grasslands is a common problem across semi-arid areas worldwide.over the last 150 years much of the south-Western USA has experienced significant land degradation, with desert grasslands becoming dominated by shrubs and concurrent changes in runoff and erosion which are thought to propagate further the process of degradation. Field-based experiments were carried out to determine how runoff and erosion vary at stages over a transition from a black grama (Bouteloua eriopoda) grassland to creosote bush (Larrea tridentata) shrub land at the Sevilleta NWR LTER site in New Mexico. {delta}{sup 1}3 C and {delta}{sup 1}5 N analyses were carried out to investigate the age and potential provenance of eroded sediment. (Author) 4 refs.

  14. Preliminary risk analysis applied to the handling of health-care waste

    Directory of Open Access Journals (Sweden)

    Carvalho S.M.L.

    2002-01-01

    Full Text Available Between 75% and 90% of the waste produced by health-care providers no risk or is "general" health-care waste, comparable to domestic waste. The remaining 10-25% of health-care waste is regarded as hazardous due to one or more of the following characteristics: it may contain infectious agents, sharps, toxic or hazardous chemicals or it may be radioactive. Infectious health-care waste, particularly sharps, has been responsible for most of the accidents reported in the literature. In this work the preliminary risks analysis (PRA technique was used to evaluate practices in the handling of infectious health-care waste. Currently the PRA technique is being used to identify and to evaluate the potential for hazard of the activities, products, and services from facilities and industries. The system studied was a health-care establishment which has handling practices for infectious waste. Thirty-six procedures related to segregation, containment, internal collection, and storage operation were analyzed. The severity of the consequences of the failure (risk that can occur from careless management of infectious health-care waste was classified into four categories: negligible, marginal, critical, and catastrophic. The results obtained in this study showed that events with critics consequences, about 80%, may occur during the implementation of the containment operation, suggesting the need to prioritize this operation. As a result of the methodology applied in this work, a flowchart the risk series was also obtained. In the flowchart the events that can occur as a consequence of a improper handling of infectious health-care waste, which can cause critical risks such as injuries from sharps and contamination (infection from pathogenic microorganisms, are shown.

  15. Stochastic index model for intermittent regimes: from preliminary analysis to regionalisation

    Directory of Open Access Journals (Sweden)

    M. Rianna

    2011-04-01

    Full Text Available In small and medium-sized basins or in rivers characterized by intermittent discharges, with low or negligible/null observed values for long periods of the year, the correct representation of the discharge regime is important for issues related to water management and to define the amount and quality of water available for irrigation, domestic and recreational uses. In these cases, only one index as a statistical metric is often not enough; it is thus necessary to introduce Flow Duration Curves (FDC.

    The aim of this study is therefore to combine a stochastic index flow model capable of reproducing the FDC record period of a river, regardless of the persistence and seasonality of the series, with the theory of total probability in order to calculate how often a river is dry.

    The paper draws from preliminary analyses, including a study to estimate the correlation between discharge indicators Q95, Q50 and Q1 (discharges exceeding 95%, 50% or 1% of the time, respectively and some fundamental characteristics of the basin, as well as to identify homogeneous regions in the target area through the study of several geo-morphological features and climatic conditions. The stochastic model was then applied in one of the homogeneous regions that includes intermittent rivers.

    Finally, the model was regionalized by means of regression analysis in order to calculate the FDC for ungauged basins; the reliability of this method was tested using jack-knife validation.

  16. Identification of succinic semialdehyde reductases from Geobacter: expression,purification, crystallization, preliminary functional, and crystallographic analysis

    Institute of Scientific and Technical Information of China (English)

    Yanfeng Zhang; Xiaoli Gao; Yi Zheng; R. Michae; Garavito

    2011-01-01

    Succinic semialdehyde reductase (SSAR) is an important enzyme involved in γ-aminobutyrate (GABA) metabolism.By converting succinic semialdehyde (SSA) to γ-hydroxybutyrate (GHB),the SSAR facilitates an alternative pathway for GABA degradation.In this study,we identified SSARs from Geobacter sulfurreducens and Geobacter metallireducens (GsSSAR and GmSSAR,respectively).The enzymes were over-expressed in Escherichia coil and purified to near homogeneity.Both GsSSAR and GmSSAR showed the activity of reducing SSA using nicotinamide adenine dinucleotide phosphate as a co-factor.The oligomeric sizes of GsSSAR and GmSSAR,as determined by analytical size exclusion chromatography,suggest that the enzymes presumably exist as tetramers in solution.The recombinant GsSSAR and GmSSAR crystallized in the presence of NADP+,and the resulting crystals diffracted to 1.89 (A) (GsSSAR) and 2.25 (A)(GmSSAR) resolution.The GsSSAR and GmSSAR crystals belong to the space groups P21221 (a =99.61 (A),b =147.49 (A),c =182.47 A) and P1 (a =75.97 (A) b =79.14 (A) c =95.47 (A),α =82.15°,β =88.80°,γ=87.66°),respectively.Preliminary crystallographic data analysis suggests the presence of eight protein monomers in the asymmetric units for both GsSSAR and GmSSAR.

  17. Identification of succinic semialdehyde reductases from Geobacter: expression, purification, crystallization, preliminary functional, and crystallographic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yanfeng; Gao, Xiaoli; Zheng, Yi; Garavito, R. Michael (MSU)

    2012-04-30

    Succinic semialdehyde reductase (SSAR) is an important enzyme involved in {gamma}-aminobutyrate (GABA) metabolism. By converting succinic semialdehyde (SSA) to {gamma}-hydroxybutyrate (GHB), the SSAR facilitates an alternative pathway for GABA degradation. In this study, we identified SSARs from Geobacter sulfurreducens and Geobacter metallireducens (GsSSAR and GmSSAR, respectively). The enzymes were over-expressed in Escherichia coli and purified to near homogeneity. Both GsSSAR and GmSSAR showed the activity of reducing SSA using nicotinamide adenine dinucleotide phosphate as a co-factor. The oligomeric sizes of GsSSAR and GmSSAR, as determined by analytical size exclusion chromatography, suggest that the enzymes presumably exist as tetramers in solution. The recombinant GsSSAR and GmSSAR crystallized in the presence of NADP{sup +}, and the resulting crystals diffracted to 1.89 {angstrom} (GsSSAR) and 2.25 {angstrom} (GmSSAR) resolution. The GsSSAR and GmSSAR crystals belong to the space groups P2{sub 1}22{sub 1} (a = 99.61 {angstrom}, b = 147.49 {angstrom}, c = 182.47 {angstrom}) and P1 (a = 75.97 {angstrom}, b = 79.14 {angstrom}, c = 95.47 {angstrom}, {alpha} = 82.15{sup o}, {beta} = 88.80{sup o}, {gamma} = 87.66{sup o}), respectively. Preliminary crystallographic data analysis suggests the presence of eight protein monomers in the asymmetric units for both GsSSAR and GmSSAR.

  18. Preliminary Analysis of the Transient Reactor Test Facility (TREAT) with PROTEUS

    Energy Technology Data Exchange (ETDEWEB)

    Connaway, H. M. [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, C. H. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-11-30

    The neutron transport code PROTEUS has been used to perform preliminary simulations of the Transient Reactor Test Facility (TREAT). TREAT is an experimental reactor designed for the testing of nuclear fuels and other materials under transient conditions. It operated from 1959 to 1994, when it was placed on non-operational standby. The restart of TREAT to support the U.S. Department of Energy’s resumption of transient testing is currently underway. Both single assembly and assembly-homogenized full core models have been evaluated. Simulations were performed using a historic set of WIMS-ANL-generated cross-sections as well as a new set of Serpent-generated cross-sections. To support this work, further analyses were also performed using additional codes in order to investigate particular aspects of TREAT modeling. DIF3D and the Monte-Carlo codes MCNP and Serpent were utilized in these studies. MCNP and Serpent were used to evaluate the effect of geometry homogenization on the simulation results and to support code-to-code comparisons. New meshes for the PROTEUS simulations were created using the CUBIT toolkit, with additional meshes generated via conversion of selected DIF3D models to support code-to-code verifications. All current analyses have focused on code-to-code verifications, with additional verification and validation studies planned. The analysis of TREAT with PROTEUS-SN is an ongoing project. This report documents the studies that have been performed thus far, and highlights key challenges to address in future work.

  19. Purification, crystallization and preliminary structural analysis of nucleoside diphosphate kinase from Bacillus anthracis

    Energy Technology Data Exchange (ETDEWEB)

    Misra, Gauri [Molecular and Structural Biology Division, Central Drug Research Institute, PO Box 173, Chattar Manzil, Mahatma Gandhi Marg, Lucknow 226 001 (India); Aggarwal, Anita [Institute of Genomics and Integrative Biology, Mall Road, Delhi 110 007 (India); Mittal, Sonia [Molecular and Structural Biology Division, Central Drug Research Institute, PO Box 173, Chattar Manzil, Mahatma Gandhi Marg, Lucknow 226 001 (India); Singh, Yogendra [Institute of Genomics and Integrative Biology, Mall Road, Delhi 110 007 (India); Ramachandran, Ravishankar, E-mail: r-ravishankar@cdri.res.in [Molecular and Structural Biology Division, Central Drug Research Institute, PO Box 173, Chattar Manzil, Mahatma Gandhi Marg, Lucknow 226 001 (India)

    2007-12-01

    Nucleoside diphosphate kinase from B. anthracis has been crystallized. Preliminary crystallographic analysis shows that there is one monomer in the asymmetric unit of the crystal. Bacillus anthracis nucleoside diphosphate kinase (BaNdk) is an enzyme whose primary function is to maintain deoxynucleotide triphosphate (dNTP) pools by converting deoxynucleotide diphosphates to triphosphates using ATP as the major phosphate donor. Although the structures of Ndks from a variety of organisms have been elucidated, the enzyme from sporulating bacteria has not been structurally characterized to date. Crystals of the B. anthracis enzyme were grown using the vapour-diffusion method from a hanging drop consisting of 2 µl 10 mg ml{sup −1} protein in 50 mM Tris–HCl pH 8.0, 50 mM NaCl, 5 mM EDTA equilibrated against 500 µl reservoir solution consisting of 2.25 M ammonium formate and 0.1 M HEPES buffer pH 7.25. Diffraction data extending to 2.0 Å were collected at room temperature from a single crystal with unit-cell parameters a = b = 107.53, c = 52.3 Å. The crystals are hexagonal in shape and belong to space group P6{sub 3}22. The crystals contain a monomer in the asymmetric unit, which corresponds to a Matthews coefficient (V{sub M}) of 2.1 Å{sup 3} Da{sup −1} and a solvent content of about 36.9%.

  20. A new scoring system in Cystic Fibrosis: statistical tools for database analysis - a preliminary report.

    Science.gov (United States)

    Hafen, G M; Hurst, C; Yearwood, J; Smith, J; Dzalilov, Z; Robinson, P J

    2008-10-05

    Cystic fibrosis is the most common fatal genetic disorder in the Caucasian population. Scoring systems for assessment of Cystic fibrosis disease severity have been used for almost 50 years, without being adapted to the milder phenotype of the disease in the 21st century. The aim of this current project is to develop a new scoring system using a database and employing various statistical tools. This study protocol reports the development of the statistical tools in order to create such a scoring system. The evaluation is based on the Cystic Fibrosis database from the cohort at the Royal Children's Hospital in Melbourne. Initially, unsupervised clustering of the all data records was performed using a range of clustering algorithms. In particular incremental clustering algorithms were used. The clusters obtained were characterised using rules from decision trees and the results examined by clinicians. In order to obtain a clearer definition of classes expert opinion of each individual's clinical severity was sought. After data preparation including expert-opinion of an individual's clinical severity on a 3 point-scale (mild, moderate and severe disease), two multivariate techniques were used throughout the analysis to establish a method that would have a better success in feature selection and model derivation: 'Canonical Analysis of Principal Coordinates' and 'Linear Discriminant Analysis'. A 3-step procedure was performed with (1) selection of features, (2) extracting 5 severity classes out of a 3 severity class as defined per expert-opinion and (3) establishment of calibration datasets. (1) Feature selection: CAP has a more effective "modelling" focus than DA.(2) Extraction of 5 severity classes: after variables were identified as important in discriminating contiguous CF severity groups on the 3-point scale as mild/moderate and moderate/severe, Discriminant Function (DF) was used to determine the new groups mild, intermediate moderate, moderate, intermediate

  1. A new scoring system in Cystic Fibrosis: statistical tools for database analysis – a preliminary report

    Science.gov (United States)

    Hafen, GM; Hurst, C; Yearwood, J; Smith, J; Dzalilov, Z; Robinson, PJ

    2008-01-01

    Background Cystic fibrosis is the most common fatal genetic disorder in the Caucasian population. Scoring systems for assessment of Cystic fibrosis disease severity have been used for almost 50 years, without being adapted to the milder phenotype of the disease in the 21st century. The aim of this current project is to develop a new scoring system using a database and employing various statistical tools. This study protocol reports the development of the statistical tools in order to create such a scoring system. Methods The evaluation is based on the Cystic Fibrosis database from the cohort at the Royal Children's Hospital in Melbourne. Initially, unsupervised clustering of the all data records was performed using a range of clustering algorithms. In particular incremental clustering algorithms were used. The clusters obtained were characterised using rules from decision trees and the results examined by clinicians. In order to obtain a clearer definition of classes expert opinion of each individual's clinical severity was sought. After data preparation including expert-opinion of an individual's clinical severity on a 3 point-scale (mild, moderate and severe disease), two multivariate techniques were used throughout the analysis to establish a method that would have a better success in feature selection and model derivation: 'Canonical Analysis of Principal Coordinates' and 'Linear Discriminant Analysis'. A 3-step procedure was performed with (1) selection of features, (2) extracting 5 severity classes out of a 3 severity class as defined per expert-opinion and (3) establishment of calibration datasets. Results (1) Feature selection: CAP has a more effective "modelling" focus than DA. (2) Extraction of 5 severity classes: after variables were identified as important in discriminating contiguous CF severity groups on the 3-point scale as mild/moderate and moderate/severe, Discriminant Function (DF) was used to determine the new groups mild, intermediate moderate

  2. A new scoring system in Cystic Fibrosis: statistical tools for database analysis – a preliminary report

    Directory of Open Access Journals (Sweden)

    Yearwood J

    2008-10-01

    Full Text Available Abstract Background Cystic fibrosis is the most common fatal genetic disorder in the Caucasian population. Scoring systems for assessment of Cystic fibrosis disease severity have been used for almost 50 years, without being adapted to the milder phenotype of the disease in the 21st century. The aim of this current project is to develop a new scoring system using a database and employing various statistical tools. This study protocol reports the development of the statistical tools in order to create such a scoring system. Methods The evaluation is based on the Cystic Fibrosis database from the cohort at the Royal Children's Hospital in Melbourne. Initially, unsupervised clustering of the all data records was performed using a range of clustering algorithms. In particular incremental clustering algorithms were used. The clusters obtained were characterised using rules from decision trees and the results examined by clinicians. In order to obtain a clearer definition of classes expert opinion of each individual's clinical severity was sought. After data preparation including expert-opinion of an individual's clinical severity on a 3 point-scale (mild, moderate and severe disease, two multivariate techniques were used throughout the analysis to establish a method that would have a better success in feature selection and model derivation: 'Canonical Analysis of Principal Coordinates' and 'Linear Discriminant Analysis'. A 3-step procedure was performed with (1 selection of features, (2 extracting 5 severity classes out of a 3 severity class as defined per expert-opinion and (3 establishment of calibration datasets. Results (1 Feature selection: CAP has a more effective "modelling" focus than DA. (2 Extraction of 5 severity classes: after variables were identified as important in discriminating contiguous CF severity groups on the 3-point scale as mild/moderate and moderate/severe, Discriminant Function (DF was used to determine the new groups mild

  3. Preliminary Evaluation of MapReduce for High-Performance Climate Data Analysis

    Science.gov (United States)

    Duffy, D. Q.; Schnase, J. L.; Clune, T. L.; Kim, E. J.; Freeman, S. M.; Thompson, J. H.; Hunter, K. A.; Theriot, M. E.

    2011-12-01

    Data intensive analytic workflows bridge between the largely unstructured mass of stored scientific data and the highly structured, tailored, reduced, and refined products used by scientists in their research. In general, the initial steps of an analysis, those operations that first interact with a data repository, tend to be the most general, while data manipulations closer to the client tend to be the most specialized to the individual, to the domain, or to the science question under study. The amount of data being operated on also tends to be larger on the repository-side of the workflow, smaller toward the client-side end products. We are using MapReduce to exploit this natural stratification, optimize efficiencies along the workflow chain, and provide a preliminary qualitative and quantitative assessment of MapReduce as a means of enabling server-side, distributed climate data analysis. MapReduce is a model for distributed storage and computation that seeks to improve efficiencies of the near-archive operations that initiate workflows. Simply put, MapReduce stores chunked data on disks with associated processors in such a way that operations on the chunked data can occur in parallel and return meaningfully aggregated results. While MapReduce has proven effective for large repositories of textual data, its use in data intensive science applications has been limited, because many scientific data sets are inherently complex, have high dimensionality, and use binary formats. We are using Apache's open-source Hadoop software implementation of MapReduce on top of the Hadoop Filesystem in our evaluation. Our analyses focus on soil moisture, precipitation, and atmospheric water-vapor, important classes of observation- and simulation-derived data products. The specific data sets being used in the evaluation include MERRA monthly precipitation and soil moisture products; the MODIS Atmospheres, 8-day global water-vapor product; and the SMOS 3-day global soil moisture

  4. Hall Effect Thruster Plume Contamination and Erosion Study

    Science.gov (United States)

    Jaworske, Donald A.

    2000-01-01

    The objective of the Hall effect thruster plume contamination and erosion study was to evaluate the impact of a xenon ion plume on various samples placed in the vicinity of a Hall effect thruster for a continuous 100 hour exposure. NASA Glenn Research Center was responsible for the pre- and post-test evaluation of three sample types placed around the thruster: solar cell cover glass, RTV silicone, and Kapton(R). Mass and profilometer), were used to identify the degree of deposition and/or erosion on the solar cell cover glass, RTV silicone, and Kapton@ samples. Transmittance, reflectance, solar absorptance, and room temperature emittance were used to identify the degree of performance degradation of the solar cell cover glass samples alone. Auger spectroscopy was used to identify the chemical constituents found on the surface of the exposed solar cell cover glass samples. Chemical analysis indicated some boron nitride contamination on the samples, from boron nitride insulators used in the body of the thruster. However, erosion outweighted contamination. All samples exhibited some degree of erosion. with the most erosion occurring near the centerline of the plume and the least occurring at the +/- 90 deg positions. For the solar cell cover glass samples, erosion progressed through the antireflective coating and into the microsheet glass itself. Erosion occurred in the solar cell cover glass, RTV silicone and Kapton(R) at different rates. All optical properties changed with the degree of erosion, with solar absorptance and room temperature emittance increasing with erosion. The transmittance of some samples decreased while the reflectance of some samples increased and others decreased. All results are consistent with an energetic plume of xenon ions serving as a source for erosion.

  5. SINGLE-SHELL TANK INTEGRITY PROJECT ANALYSIS OF RECORD-PRELIMINARY MODELING PLAN FOR THERMAL AND OPERATING LOADS

    Energy Technology Data Exchange (ETDEWEB)

    RAST RS; RINKER MW; BAPANAALLI SK; DEIBLER JE; GUZMAN-LEONG CE; JOHNSON KI; KARRI NK; PILLI SP; SANBORN SE

    2010-10-22

    This document is a Phase I deliverable for the Single-Shell Tank Analysis of Record effort. This document is not the Analysis of Record. The intent of this document is to guide the Phase II detailed modeling effort. Preliminary finite element models for each of the tank types were developed and different case studies were performed on one or more of these tank types. Case studies evaluated include thermal loading, waste level variation, the sensitivity of boundary effects (soil radial extent), excavation slope or run to rise ratio, soil stratigraphic (property and layer thickness) variation at different farm locations, and concrete material property variation and their degradation under thermal loads. The preliminary analysis document reviews and preliminary modeling analysis results are reported herein. In addition, this report provides recommendations for the next phase of the SST AOR project, SST detailed modeling. Efforts and results discussed in this report do not include seismic modeling as seismic modeling is covered by a separate report. The combined results of both static and seismic models are required to complete this effort. The SST AOR project supports the US Department of Energy's (DOE) Office of River Protection (ORP) mission for obtaining a better understanding of the structural integrity of Hanford's SSTs. The 149 SSTs, with six different geometries, have experienced a range of operating histories which would require a large number of unique analyses to fully characterize their individual structural integrity. Preliminary modeling evaluations were conducted to determine the number of analyses required for adequate bounding of each of the SST tank types in the Detailed Modeling Phase of the SST AOR Project. The preliminary modeling was conducted in conjunction with the Evaluation Criteria report, Johnson et al. (2010). Reviews of existing documents were conducted at the initial stage of preliminary modeling. These reviews guided the topics

  6. Using REE Tracers to Measure Sheet Erosion Changing to Rill Erosion

    Institute of Scientific and Technical Information of China (English)

    宋炜; 刘普灵; 杨明义; 薛亚洲

    2003-01-01

    Rare earth element(REE) tracer method was used to study sheet erosion changing to rill erosion on slope land. By placing different REE on different soil depth across a slope in an indoor plot, two simulated rainfalls were applied to study the change of erosion type and the rill erosion process. The results indicate that the main erosion type is sheet erosion at the beginning of the rainfalls, and serious erosion happens after rill erosion appears. Accumulated sheet and rill erosion amount increases with the rainfalls time. The percentage of sheet erosion amount decreases and rill erosion percentage increases with time. At the end of the rainfalls, the total rill erosion amounts are 4.3 and 5 times more than sheet erosion. In this paper, a new REE tracer method was used to quantitatively distinguish sheet and rill erosion amount. The new REE tracer method should be useful to future studying of erosion processes on slope lands.

  7. Analysis on the coastline change and erosion-accretion evolution of the Pearl River Estuary, China, based on remote-sensing images and nautical charts

    Science.gov (United States)

    Wang, Xiao-Zhen; Zhang, Hua-Guo; Fu, Bin; Shi, Ai-qin

    2013-01-01

    Coastline change, erosion-accretion evolution, and their relationship in the Pearl River Estuary (PRE) of China over the past 25 years are analyzed using six remote-sensing images from 1986 to 2011 and two nautical charts. Due to land reclamation in the period from 1986 to 2011, the total length of the PRE coastline increased by 149.2 km, which is equivalent to a growth of 0.57% per year, and the coastal land increased by 251.76 km2, which is equivalent to a growth of 0.23% per year; in addition, water depth change showed a trend in that foreshores became shallower, while deep channels became deeper. Areas where the coastline extended seaward had deposition to some extent, except for deepwater ports. Human activities played an important role in coastline change and erosion-accretion evolution in the PRE, which intervened with the natural variation of coastline and erosion-accretion. In addition, pollutants from the reclamation land became the major factors of coastal water pollution, which may significantly influence the environment of the PRE in a negative way.

  8. How do Organizational Learning and Market Conditions Affect the Relationship between Entrepreneurial Orientation and Firm Growth? A Preliminary Analysis on Small and Medium Size Hotels in Peninsular Malaysia

    National Research Council Canada - National Science Library

    Azilah Kasim; Levent Altinay

    2016-01-01

      This is a preliminary analysis on the influence of organizational learning and market conditions on the relationships between entrepreneurial orientation and growth of small and medium size hotels...

  9. Analysis of rainfall-induced shallow landslides in Jamne and Jaszcze stream valleys (Polish Carpathians – preliminary results

    Directory of Open Access Journals (Sweden)

    Zydroń Tymoteusz

    2016-03-01

    Full Text Available Analysis of rainfall-induced shallow landslides in Jamne and Jaszcze stream valleys (Polish Carpathians - preliminary results. Preliminary shallow landslide susceptibility mapping of the Jamne and Jaszcze stream valleys, located in the Polish Flysch Carpathians, is presented in the paper. For the purpose of mapping, there were used SINMAP and Iverson’s models integrating infiltration and slope stability calculations. The calibration of the used models parameters, obtained from limited field and laboratory tests, was performed using data from 8-9 July 1997, when as a consequence of a very intense rainfall, 94 shallow landslides were observed on meadows and arable lands. A comparison of the slope stability calculation results and the localisation of the noticed shallow landslides showed satisfactory agreement between localisation of the observed and computed unstable areas. However, it was concluded that better simulation results were obtained using Iverson’s model.

  10. Relationships Between Intensity Gradation and Evolution of Soil Erosion: A Case Study of Changting in Fujian Province, China

    Institute of Scientific and Technical Information of China (English)

    LIN Chen; ZHOU Sheng-Lu; WU Shao-Hua; LIAO Fu-Qiang

    2012-01-01

    Soil erosion gradation is a robust and objective quantitative indicator of soil erosion intensity.Recent applications of soil erosion gradation have focused on monitoring soil erosion with models or simulation of soil erosion through gradation trends.However,soil erosion simulation accuracy is generally being reduced due to the rare consideration of the relationship between soil erosion gradation and erosion evolution.In this study,we investigated different soil erosion intensity grades to demonstrate their sensitivity to types and rates of erosion.Specifically,the objective was to define the relationship between soil erosion gradation and soil erosion evolution in Changting,an undeveloped area in Fujian Province,China,for four time intervals (1975,1990,1999,and 2006).The time series of erosion gradation were developed by modeling analysis with integration of several erosion indicators,and the relationships between the erosion grades and evolution types and rates were quantified.Comparison of the collapsing forces with natural and restoring forces based on human activity demonstrated that there existed an obvious spatial uncertainty in the erosion evolution types,both positive and negative succession coexisted,and the evolution rates were mostly influenced by the force of policy orientation.The impacts of these driving forces were eventually reflected in the erosion intensity gradation and erosion evolution.The correlation between the negative succession rate and erosion intensity gradation was weak and showed a poor contribution to the average succession rate,while the negative correlation between the positive succession rate and erosion intensity gradation would be increasingly clear as time passed.

  11. [Unhealthy weight loss. Erosion by apple cider vinegar].

    Science.gov (United States)

    Gambon, D L; Brand, H S; Veerman, E C I

    2012-12-01

    Erosive tooth wear was diagnosed in the dentition of a 15-year-old girl with a Moroccan background. After an anamnesis, extensive analysis of possible risk factors and a study of the pattern of erosion, it was concluded that the erosive tooth wear was induced by daily consumption of a glass of apple cider vinegar Further investigation revealed that in North-African culture, women have used apple cider vinegar to achieve weight loss for generations. Bodybuilders are also known to make use of this method of weight reduction.

  12. An integrated assessment of soil erosion dynamics with special emphasis on gully erosion: Case studies from South Africa and Iran

    Science.gov (United States)

    Maerker, Michael; Sommer, Christian; Zakerinejad, Reza; Cama, Elena

    2017-04-01

    Soil erosion by water is a significant problem in arid and semi arid areas of large parts of Iran. Water erosion is one of the most effective phenomena that leads to decreasing soil productivity and pollution of water resources. Especially in semiarid areas like in the Mazayjan watershed in the Southwestern Fars province as well as in the Mkomazi catchment in Kwa Zulu Natal, South Africa, gully erosion contributes to the sediment dynamics in a significant way. Consequently, the intention of this research is to identify the different types of soil erosion processes acting in the area with a stochastic approach and to assess the process dynamics in an integrative way. Therefore, we applied GIS, and satellite image analysis techniques to derive input information for the numeric models. For sheet and rill erosion the Unit Stream Power-based Erosion Deposition Model (USPED) was utilized. The spatial distribution of gully erosion was assessed using a statistical approach which used three variables (stream power index, slope, and flow accumulation) to predict the spatial distribution of gullies in the study area. The eroded gully volumes were estimated for a multiple years period by fieldwork and Google Earth high resolution images as well as with structure for motion algorithm. Finally, the gully retreat rates were integrated into the USPED model. The results show that the integration of the SPI approach to quantify gully erosion with the USPED model is a suitable method to qualitatively and quantitatively assess water erosion processes in data scarce areas. The application of GIS and stochastic model approaches to spatialize the USPED model input yield valuable results for the prediction of soil erosion in the test areas. The results of this research help to develop an appropriate management of soil and water resources in the study areas.

  13. 基于数值模拟方法的阀门冲刷损伤分析%Valve Erosion Damage Analysis under Approach of Numeral Simulation

    Institute of Scientific and Technical Information of China (English)

    何子昂; 张维; 尹开锯; 唐武; 陈勇; 洪晓峰

    2016-01-01

    Under the approach of numeral simulation,this paper firstly aims to carry out the simulating calculation work of value under different operating conditions and value lift,and then analyzes the erosion damage of the internal components of the value,which include value core,cage and seat.From this research,we can find that the extent and the location of the erosion are directly affected by the opening degree of the value.When the distance between the value core and seat is deliberately 20mm,the upstream face of the value core erodes most seriously.When opening degree is small (2-20),the side face and conical surface are scoured the most,and the erosion degree is inversely proportional to its opening degree.When the opening degree is larger (40mm),the cage orifice is eroded the most.Under the same flowing condition,the opening degree of the value is inversely proportional to the degree of erosion,and the conical surface of the value core and the cage outlet is vulnerable to erosion.%通过数值模拟方法,开展阀门在不同运行工况和不同阀程的模拟计算工作,分析阀门内部组件包括阀芯、阀笼和阀座的冲刷损伤情况.阀门不同开启程度直接影响冲刷损伤程度和位置分布.阀芯距离阀座20 mm时,阀芯迎流面冲刷损伤最严重;开启度较小时(2~20 mm),阀芯侧面及锥面冲刷最剧烈,且损伤程度与开启度成反比;开启度较大时(>40 mm),阀笼出流孔处冲刷最剧烈.同样流速条件下,阀门开启度与冲刷损伤情况成反比,阀芯锥形面和阀笼出水口易于受到冲刷损伤.

  14. Development and Life Prediction of Erosion Resistant Turbine Low Conductivity Thermal Barrier Coatings

    Science.gov (United States)

    Zhu, Dongming; Miller, Robert A.; Kuczmarski, Maria A.

    2010-01-01

    Future rotorcraft propulsion systems are required to operate under highly-loaded conditions and in harsh sand erosion environments, thereby imposing significant material design and durability issues. The incorporation of advanced thermal barrier coatings (TBC) in high pressure turbine systems enables engine designs with higher inlet temperatures, thus improving the engine efficiency, power density and reliability. The impact and erosion resistance of turbine thermal barrier coating systems are crucial to the turbine coating technology application, because a robust turbine blade TBC system is a prerequisite for fully utilizing the potential coating technology benefit in the rotorcraft propulsion. This paper describes the turbine blade TBC development in addressing the coating impact and erosion resistance. Advanced thermal barrier coating systems with improved performance have also been validated in laboratory simulated engine erosion and/or thermal gradient environments. A preliminary life prediction modeling approach to emphasize the turbine blade coating erosion is also presented.

  15. Analysis of the operation of a diffraction-radiation generator with preliminary HF modulation

    Science.gov (United States)

    Pivovarova, A. G.

    1991-05-01

    The excitation conditions and output characteristics of a diffraction-radiation generator with preliminary HF modulation are determined. Attention is given to the effects of the modulation parameter, the phase shift, and the aiming distance on the displacement of the generation zone, variations of the minimum starting current, the frequency shift, the oscillation amplitude, and the efficiency of the generator. It is shown that the efficiency of a generator with preliminary HF modulation can be twice as high as that of a generator without modulation.

  16. Preliminary analysis of mortality associated with rituximab use in autoimmune diseases.

    Science.gov (United States)

    Shetty, Shawn; Ahmed, A R

    2013-12-01

    Normal antibodies and pathogenic autoantibodies are produced by B-cells and plasma cells. Rituximab is a chimeric monoclonal antibody that targets the CD20 molecule on cells that express them on their surface and kills them. Rituximab has been increasingly used to treat several autoimmune diseases. Studies on fatal outcomes associated with rituximab therapy are lacking. A comprehensive and detailed analysis in which the multiple factors that could contribute to a fatal outcome in all the autoimmune diseases in which rituximab has been used would be cumbersome, lack uniformity and would prove difficult in making certain definitive conclusions and comparisons, but more importantly it would not allow to provide specific precautions and recommendations to prevent mortality. Hence, autoimmune mucocutaneous blistering diseases (AMBD) were used as model to study fatal outcomes in patients treated with rituximab between 2000 and 2013, using uniform 13 criteria. Fatal outcomes were found in 14 patients with autoimmune blistering diseases out of 134 patients (10.4%). Patients died due to infections (75%), gastrointestinal (17%) and cardiac events (8%). Causes of death were reported in 101 patients with other autoimmune diseases out of 4320 with a mortality rate of 2.4%. Among them, 44 patients (43.6%) died from infections. A statistical analysis of the data demonstrated that a statistically significant higher mortality rate was observed in patients with AMBD compared to patients with other autoimmune diseases. Similarly, a statistically significant higher rate of death due to infections was reported in patients with AMBD compared to patients with other autoimmune diseases. Use of systemic corticosteroids and immunosuppressive agents as concomitant therapy with rituximab enhanced immunosuppression. In many patients, B-cells were depleted for prolonged periods, even after clinical recovery was observed. Although its main action is depletion of B-cells, rituximab has a

  17. Preliminary Analysis of Ground-based Orbit Determination Accuracy for the Wide Field Infrared Survey Telescope (WFIRST)

    Science.gov (United States)

    Sease, Brad

    2017-01-01

    The Wide Field Infrared Survey Telescope is a 2.4-meter telescope planned for launch to the Sun-Earth L2 point in 2026. This paper details a preliminary study of the achievable accuracy for WFIRST from ground-based orbit determination routines. The analysis here is divided into two segments. First, a linear covariance analysis of early mission and routine operations provides an estimate of the tracking schedule required to meet mission requirements. Second, a simulated operations scenario gives insight into the expected behavior of a daily Extended Kalman Filter orbit estimate over the first mission year given a variety of potential momentum unloading schemes.

  18. Classification and Assessment of Freeze-Thaw Erosion in Tibet, China

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jian-guo; YANG Yong-hong; LIU Shu-zhen

    2005-01-01

    Based on the analysis of existing relevant research result, a theoretical basis for the defining freeze-thaw erosion zones of Qinghai-Tibet Plateau was been put forward, and a equation for calculating the altitude of the lower bound of the freeze-thaw erosion zones of Qinghai-Tibet Plateau was been established in this paper. Moreover, the freeze-thaw erosion zones in Tibet was been identified by using Geographical Information System (GIS) software. Next, based on the comprehensive analysis of impact factors of freeze-thaw erosion, this paper chooses annul temperature range, slop and vegetation as three indexes, works out the criteria for relative classification of freeze-thaw erosion, and realizes the relative classification of the freeze-thaw erosion in Tibet under the support of GIS software. Then, a synthetic assessment of freeze-thaw erosion in Tibet was been done according to the relative classification result.

  19. Analyzing hydro abrasive erosion in Kaplan turbine:A case study from India

    Institute of Scientific and Technical Information of China (English)

    Anant Kr. RAI; Arun KUMAR

    2016-01-01

    Sediment flow through hydro turbine causes erosion of hydraulic components resulting in drop of turbine efficiency, parti- cularly in hydropower plants of the Himalayan region. The measurement of erosion and monitoring of sediment flow in turbine are major concerns in erosion study. Attempts have been made to study erosion mainly in Pelton and Francis turbines. In this study, a simple and effective method has been presented to measure erosion in a Kaplan turbine of a run-of-river scheme Chilla hydropower plant in foothills of Himalaya. Recent techniques were used to measure sediment parameters like concentration, size, shape and mineral content. A standard erosion model is applied to estimate the erosion in Kaplan turbine blade, runner chamber and draft tube cone. A calibration factor has been proposed to apply the erosion model for site specific conditions. It has been found that the outer trailing edges of the turbine blade and upper runner chamber are most erosion prone zones. Sediment analysis revealed that effective operation can reduce erosion in turbine components. The estimated erosion values from model are found to be consistent with measu- red values. Finally, suggestions for design improvements and effective operation of erosion affected hydropower plants are given.

  20. Development of the Taiwanese Mandarin Main Concept Analysis (TM-MCA: Normative and Preliminary Aphasic Data

    Directory of Open Access Journals (Sweden)

    Anthony Pak Hin Kong

    2014-03-01

    Full Text Available Introduction Compared to the English literature, there is a great paucity of studies focusing on quantitative analysis of aphasic oral discourse in Chinese, especially for native speakers of Taiwanese-Mandarin residing in Taiwan. Several studies that investigated deficits of aphasic discourse have been conducted in Cantonese Chinese, including the Cantonese Linguistic Communication Measure (CLCM, Kong & Law, 2004, Main Concept Analysis (MCA; Kong, 2009, and Cantonese version of the Quantitative Production Analysis (Law, 2001; Yiu & Worrall, 1996. Clinical or research application of these systems to the Taiwanese population is limited by the differences of phonology, semantics, and grammar between Taiwanese Mandarin and Cantonese. The current study, therefore, aimed to develop a culturally appropriate Taiwan Mandarin Main Concept Analysis (TM-MCA, by translating and adapting the MCA in Cantonese (Kong, 2009, 2011, and then to validate the tool on the basis of normal speakers and people with aphasia in Taiwan. Method Picture stimuli and main concepts for the TM-MCA: Eight certified Taiwanese SLPs participated and listed all main concepts upon presentation of the sequential pictures in Kong (2009. A main concept referred to a statement consisting of only one main verb with two or more pieces of essential information accurately related to the pictures and informative about the content. All main concepts mentioned by six out of eight SLPs were included in a preliminary main concept list. Further validation of the list involved recruiting eight normal speakers to orally describe the same picture sets. Only those scored as Accurate and Complete (AC or Accurate but Incomplete (AI by at least five speakers were put in the final list. Normative and aphasic data collection and analysis: Thirty six native Taiwanese Mandarin speakers and ten individuals with aphasia orally perform the same picture description tasks. Six measures, including Number of Accurate

  1. GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of Jasminum cuspidatum leaves

    Directory of Open Access Journals (Sweden)

    Singumsetty Vinay

    2014-12-01

    Full Text Available The purpose of the present study was investigating the GC-MS analysis, preliminary phytochemical screening, physicochemical analysis and anti-diabetic activity of ethanol extract of the leaves of Jasminum cuspidatum. The anti-diabetic activity was investigated in streptozotocin-induced diabetes rats with treatment of ethanol extract at the dose level of 200 and 400 mg/kg, which was compared with glibenclamide at a dose level of 4 mg/kg and the parameter measured being the blood glucose, total cholesterol, HDL, LDL, VLDL, triglycerides, and total protein. An oral glucose tolerance test (OGTT was also investigated in experimental rats. The GC-MS analysis revealed that the ethanol extract contained seven phytoconstituents. Preliminary phytochemical screening showed the presence of triterpenoids, flavonoids, glycosides and steroids. The result of in vivo anti-diabetic activity revealed that the ethanol extract of J. cuspidatum showed significant anti-diabetic activity.

  2. Effects of Social Psychological Phenomena on School Psychologists' Ethical Decision-Making: A Preliminary Empirical Analysis

    Science.gov (United States)

    Klose, Laurie McGarry; Lasser, Jon; Reardon, Robert F.

    2012-01-01

    This preliminary, exploratory study examines the impact of select social psychological phenomena on school-based ethical decision-making of school psychologists. Responses to vignettes and hypothetical statements reflecting several social psychological phenomena were collected from 106 practicing school psychologists. Participants were asked to…

  3. Preliminary analysis of species partitioning in the DWPF melter. Sludge batch 7A

    Energy Technology Data Exchange (ETDEWEB)

    Choi, A. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Smith III, F. G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-01-01

    The work described in this report is preliminary in nature since its goal was to demonstrate the feasibility of estimating the off-gas carryover from the Defense Waste Processing Facility (DWPF) melter based on a simple mass balance using measured feed and glass pour stream (PS) compositions and time-averaged melter operating data over the duration of one canister-filling cycle.

  4. Preliminary bioelectrical impedance analysis (BIA) equation for body composition assessment in young females from Colombia

    Science.gov (United States)

    Caicedo-Eraso, J. C.; González-Correa, C. H.; González-Correa, C. A.

    2013-04-01

    A previous study showed that reported BIA equations for body composition are not suitable for Colombian population. The purpose of this study was to develop and validate a preliminary BIA equation for body composition assessment in young females from Colombia, using hydrodensitometry as reference method. A sample of 30 young females was evaluated. Inclusion and exclusion criteria were defined to minimize the variability of BIA. Height, weight, BIA, residual lung volume (RV) and underwater weight (UWW) were measured. A preliminary BIA equation was developed (r2 = 0.72, SEE = 2.48 kg) by stepwise multiple regression with fat-free mass (FFM) as dependent variable and weight, height and impedance measurements as independent variables. The quality of regression was evaluated and a cross-validation against 50% of sample confirmed that results obtained with the preliminary BIA equation is interchangeable with results obtained with hydrodensitometry (r2 = 0.84, SEE = 2.62 kg). The preliminary BIA equation can be used for body composition assessment in young females from Colombia until a definitive equation is developed. The next step will be increasing the sample, including a second reference method, as deuterium oxide dilution (D2O), and using multi-frequency BIA (MF-BIA). It would also be desirable to develop equations for males and other ethnic groups in Colombia.

  5. A preliminary study on electromyographic analysis of the paraspinal musculature in idiopathic scoliosis

    NARCIS (Netherlands)

    Cheung, J.; Halbertsma, J.P.; Veldhuizen, A.G.; Sluiter, W.J.; Maurits, N.M.; Cool, J.C.; van Horn, J.R.

    2005-01-01

    The paraspinal muscles have been implicated as a major causative factor in the progression of idiopathic scoliosis. Therefore, the objectives of this preliminary study were to measure the electromyographic activity (EMG) of the paraspinal muscles to determine its relationship to progression of the s

  6. A Sensitivity Study for an Evaluation of Input Parameters Effect on a Preliminary Probabilistic Tsunami Hazard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Rhee, Hyun-Me; Kim, Min Kyu; Choi, In-Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Sheen, Dong-Hoon [Chonnam National University, Gwangju (Korea, Republic of)

    2014-10-15

    The tsunami hazard analysis has been based on the seismic hazard analysis. The seismic hazard analysis has been performed by using the deterministic method and the probabilistic method. To consider the uncertainties in hazard analysis, the probabilistic method has been regarded as attractive approach. The various parameters and their weight are considered by using the logic tree approach in the probabilistic method. The uncertainties of parameters should be suggested by analyzing the sensitivity because the various parameters are used in the hazard analysis. To apply the probabilistic tsunami hazard analysis, the preliminary study for the Ulchin NPP site had been performed. The information on the fault sources which was published by the Atomic Energy Society of Japan (AESJ) had been used in the preliminary study. The tsunami propagation was simulated by using the TSUNAMI{sub 1}.0 which was developed by Japan Nuclear Energy Safety Organization (JNES). The wave parameters have been estimated from the result of tsunami simulation. In this study, the sensitivity analysis for the fault sources which were selected in the previous studies has been performed. To analyze the effect of the parameters, the sensitivity analysis for the E3 fault source which was published by AESJ was performed. The effect of the recurrence interval, the potential maximum magnitude, and the beta were suggested by the sensitivity analysis results. Level of annual exceedance probability has been affected by the recurrence interval.. Wave heights have been influenced by the potential maximum magnitude and the beta. In the future, the sensitivity analysis for the all fault sources in the western part of Japan which were published AESJ would be performed.

  7. Numerical simulation and influence factor analysis on erosion-corrosion failure of petrochemical pressure pipeline%石化压力管道冲蚀失效数值模拟及影响因素分析

    Institute of Scientific and Technical Information of China (English)

    许根富; 王飞; 赵哲明; 李鹏轩; 金浩哲

    2016-01-01

    Taking the carbon steel elbow in REAC outlet pressure pipeline system of Zhenhai Refining&Chemical Company as example, combined with the erosion-corrosion failure mechanism, a mathematical model of fluid-structure interaction for e-rosion-corrosion failure was established.The interaction between erodent products protecting film and multiphase flow was an-alyzed by numerical simulation method.The distribution of shearing stress on the inner wall of elbow and the distribution of principal displacement, stress and strain of erodent products protecting film were revealed, and the erosion-corrosion failure process of petrochemical pressure pipeline was studied.The reliability of fluid-structure interaction numerical simulation method by the finite element analysis software was validated combining with field thickness measurement data, and the influ-ence of characteristic parameters, such as flow characteristics of fluid and architectural characteristics of pipeline fittings etc., on erosion-corrosion were analyzed.It provides theoretical basis and analysis means for the erosion-corrosion failure a-nalysis, structural optimization design, RBI and periodical inspection for thickness measurement and positioning, life predic-tion, risk assessment and other safety guarantee research of petrochemical pressure pipeline transportation system.%以镇海REAC出口压力管道系统碳钢弯管为例,结合冲蚀失效机理,建立冲蚀失效流固耦合数理模型。利用数值模拟技术分析腐蚀产物保护膜与多相流动之间的交互作用,揭示弯管内壁剪切应力分布及保护膜主位移、应力、应变的分布规律,研究石化压力管道系统冲蚀失效过程;结合现场测厚数据验证有限元分析软件流固耦合数值模拟方法的可靠性;并进一步对比分析了流体流动特性、管件结构特性等特性参数对冲蚀的影响。为石化压力管道输送系统的冲蚀失效分析、结构优化设计、RBI和

  8. Damage detection and quantification using mode curvature variation on framed structures: analysis of the preliminary results

    Science.gov (United States)

    Iacovino, Chiara; Ditommaso, Rocco; Auletta, Gianluca; Ponzo, Felice C.

    2017-04-01

    Continuous monitoring based on vibrational identification methods is increasingly employed for the evaluation of the state of health of existing buildings after strong motion earthquake. Different damage identification methods are based on the variations of damage indices defined in terms modal (eigenfrequencies, mode shapes, and modal damping) and/or non-modal parameters. Most of simplified methods for structural health monitoring and damage detection are based on the evaluation of the dynamic characteristics evolution associated to the fundamental mode of vibration of a monitored structure. Aim of this work is the upgrade of an existing method for damage localization on framed structures during a moderate/destructive earthquake. The existing version of the method is based on the comparison of the geometric characteristics (with particular reference to the mode curvature) exhibited by the structures, related to fundamental mode of vibration, before and during an earthquake. The approach is based on the use of a nonlinear filter, the band-variable filter, based on the Stockwell Transform able to extract the nonlinear response of each mode of vibration. The new version of the method provides the possibility to quantify a possible damage occurred on the monitored structure linking the mode curvature variation with the maximum inter-story drift. This paper shows the preliminary results obtained from several simulations on nonlinear numerical models of reinforced concrete framed structures, designed for only gravity loads, without and with the presence of infill panels. Furthermore, a correlation between maximum mode curvature difference and maximum inter-story drift has been defined for the different numerical models in order to quantify the structural damage. Acknowledgements This study was partially funded by the Italian Department of Civil Protection within the project DPC-RELUIS 2016 - RS4 ''Seismic observatory of structures and health monitoring'' and by the

  9. Synthesis, Spectral Analysis and Preliminary in Vitro Evaluation of Some Tetrapyrrolic Complexes with 3d Metal Ions

    Directory of Open Access Journals (Sweden)

    Radu Socoteanu

    2015-08-01

    Full Text Available In this paper, two tetrapyrrolic complexes, Zn(II-5-(3-hydroxyphenyl-10,15,20-tris-(4-acetoxy-3-methoxyphenylporphyrin and Cu(II-5-(3-hydroxyphenyl-10,15,20-tris-(4-acetoxy-3-methoxyphenylporphyrin were synthesized, and characterized from a spectral and biological point of view. The study provided data concerning the behavior of identical external substituents vs. two different core insertions. Some of the properties of the proposed tetrapyrrolic structures were highlighted, having photodynamic therapy of cancer as a targeted biomedical application. Elemental analysis, NMR, FTIR and UV-Vis data in various solvents were provided. A preliminary in vitro study on normal and cancer cultured cells was carried out for biocompatibility assessment in dark conditions. The preliminary in vitro study performed on human peripheral mononuclear cells exposed to tetrapyrrolic compounds (2 µM showed that the proposed compounds had a convenient cytotoxic profile on human normal peripheral blood mononuclear cells under dark conditions. Meanwhile, the investigated compounds reduced the number of metabolically active breast tumor MCF-7 cells, with the exception of Zn(II complex-containing a symmetrical ligand. Accordingly, preliminary in vitro data suggest that the proposed tetrapyrrolic compounds are good candidates for PDT, as they limit tumor expansion even under dark conditions, whilst sparing normal cells.

  10. Erosion-resistant composite material

    Science.gov (United States)

    Finch, C.B.; Tennery, V.J.; Curlee, R.M.

    A highly erosion-resistant composite material is formed of chemical vapor-deposited titanium diboride on a sintered titanium diboride-nickel substrate. This material may be suitable for use in cutting tools, coal liquefaction systems, etc.

  11. Structural characteristics and infiltration performance analysis for zonal soils under different erosion degrees%不同侵蚀程度下地带性土壤的结构及渗透性能分析

    Institute of Scientific and Technical Information of China (English)

    陈芳; 王硕; 吴新亮; 蔡崇法

    2014-01-01

    addition, saturated hydraulic conductivity of yellow cinnamon soils, yellow brown soils and red soils gradually increased except in feeble and light degree erosions. Correlation analysis showed that the aggregates mechanical stability and water stability correlated extremely significantly with Ald (correlation coefficient=0.77 and 0.81, respectively, P<0.01), and positively significantly with Fed (correlation coefficient = 0.73 and 0.76, respectively, P<0.05). All of those illustrated free iron and aluminum oxides were the dominate factors affecting the stability of zonal soils structure in the research area. Non-capillary porosity, aggregates water stability and bulk density of soil were closely related with the saturated hydraulic conductivity of the yellow cinnamon, yellow brown, and red soils (P<0.05), and there was significant correlation between saturated hydraulic conductivity and WSA fractal dimension (correlation coefficient=0.76, P<0.01). The study showed soil structure changes and the mechanism of soil structure stability are affected by iron and aluminum oxides in the process of soil erosion, and the results provide technical reference for evaluation of soil erosion so that subsequent prevention and management methods can be developed.%为探讨侵蚀退化过程中地带性土壤结构的变化规律,选取湖北省不同侵蚀程度(微度、轻度、强度、剧烈)的3种典型地带性土壤(黄褐土、黄棕壤、红壤),比较分析了土壤结构稳定性和土壤渗透特性差异。结果表明:随侵蚀程度增加,3种地带性土壤团聚体水稳性逐渐降低,容重增加,饱和导水率呈现不同程度的下降,机械稳定性变化存在差异;在侵蚀程度相同时,3种地带性土壤团聚体机械稳定性、水稳性和饱和土壤导水率的高低顺序均为红壤>黄棕壤>黄褐土。相关分析表明,土壤团聚体机械稳定性和水稳性与游离氧化铝呈极显著

  12. Identification of soil erosion risk areas for conservation planning in different states of India.

    Science.gov (United States)

    Sharda, V N; Mandal, Debashis; Ojasvi, P R

    2013-03-01

    Assessment of soil erosion risks, especially in the developing countries, is a challenging task mainly due to non-availability or insufficiency of relevant data. In this paper, the soil erosion risks have been estimated by integrating the spatial data on potential erosion rates and soil loss tolerance limits for conservation planning at state level in India. The erosion risk classes have been prioritized based upon the difference between the prevailing erosion rates and the permissible erosion limits. The analysis revealed that about 50% of total geographical area (TGA) of India, falling in five priority erosion risk classes, requires different intensity of conservation measures though about 91% area suffers from potential erosion rates varying from 40 t ha(-1) yr(-1). Statewise analysis indicated that Andhra Pradesh, Maharashtra and Rajasthan share about 75% of total area under priority Class 1 (6.4 M ha) though they account for only 19.4% of the total area (36.2 M ha) under very severe potential erosion rate category (> 40 t ha(-1)yr(-1)). It was observed that about 75% of total geographical area (TGA) in the states of Bihar, Gujarat, Haryana, Kerala and Punjab does not require any specific soil conservation measure as the potential erosion rates are well within the tolerance limits. The developed methodology can be successfully employed for prioritization of erosion risk areas at watershed, region or country level.

  13. Hayabusa Recovery, Curation and Preliminary Sample Analysis: Lessons Learned from Recent Sample Return Mission

    Science.gov (United States)

    Zolensky, Michael E.

    2011-01-01

    analytical activities before settling on a database design - Hayabusa has done a better job of this. Also, analysis teams must not be permitted to devise their own sample naming schemes. The sample handling and storage facilities for Hayabusa are the finest that exist, and we are now modifying Stardust curation to take advantage of the Hayabusa facilities. Remote storage of a sample subset is desirable. Preliminary Examination (PE) of Samples: There must be some determination of the state and quantity of the returned samples, to provide a necessary guide to persons requesting samples and oversight committees tasked with sample curation oversight. Hayabusa s sample PE, which is called HASPET, was designed so that late additions to the analysis protocols were possible, as new analytical techniques became available. A small but representative number of recovered grains are being subjected to in-depth characterization. The bulk of the recovered samples are being left untouched, to limit contamination. The HASPET plan takes maximum advantage of the unique strengths of sample return missions

  14. Preliminary Axial Flow Turbine Design and Off-Design Performance Analysis Methods for Rotary Wing Aircraft Engines. Part 1; Validation

    Science.gov (United States)

    Chen, Shu-cheng, S.

    2009-01-01

    For the preliminary design and the off-design performance analysis of axial flow turbines, a pair of intermediate level-of-fidelity computer codes, TD2-2 (design; reference 1) and AXOD (off-design; reference 2), are being evaluated for use in turbine design and performance prediction of the modern high performance aircraft engines. TD2-2 employs a streamline curvature method for design, while AXOD approaches the flow analysis with an equal radius-height domain decomposition strategy. Both methods resolve only the flows in the annulus region while modeling the impact introduced by the blade rows. The mathematical formulations and derivations involved in both methods are documented in references 3, 4 for TD2-2) and in reference 5 (for AXOD). The focus of this paper is to discuss the fundamental issues of applicability and compatibility of the two codes as a pair of companion pieces, to perform preliminary design and off-design analysis for modern aircraft engine turbines. Two validation cases for the design and the off-design prediction using TD2-2 and AXOD conducted on two existing high efficiency turbines, developed and tested in the NASA/GE Energy Efficient Engine (GE-E3) Program, the High Pressure Turbine (HPT; two stages, air cooled) and the Low Pressure Turbine (LPT; five stages, un-cooled), are provided in support of the analysis and discussion presented in this paper.

  15. Fractal Tectonics and Erosion

    Science.gov (United States)

    Turcotte, Donald L.

    Tectonic processes build landforms that are subsequently destroyed by erosional processes. Landforms exhibit fractal statistics in a variety of ways; examples include (1) lengths of coast lines; (2) number-size statistics of lakes and islands; (3) spectral behavior of topography and bathymetry both globally and locally; and (4) branching statistics of drainage networks. Erosional processes are dominant in the development of many landforms on this planet, but similar fractal statistics are also applicable to the surface of Venus where minimal erosion has occurred. A number of dynamical systems models for landforms have been proposed, including (1) cellular automata; (2) diffusion limited aggregation; (3) self-avoiding percolation; and (4) advective-diffusion equations. The fractal statistics and validity of these models will be discussed. Earthquakes also exhibit fractal statistics. The frequency-magnitude statistics of earthquakes satisfy the fractal Gutenberg-Richter relation both globally and locally. Earthquakes are believed to be a classic example of self-organized criticality. One model for earthquakes utilizes interacting slider-blocks. These slider block models have been shown to behave chaotically and to exhibit self-organized criticality. The applicability of these models will be discussed and alternative approaches will be presented. Fragmentation has been demonstrated to produce fractal statistics in many cases. Comminution is one model for fragmentation that yields fractal statistics. It has been proposed that comminution is also responsible for much of the deformation in the earth's crust. The brittle disruption of the crust and the resulting earthquakes present an integrated problem with many fractal aspects.

  16. Central receiver solar thermal power system. Phase 1. CDRL item 2; Pilot Plant preliminary design report. Volume II. System decription and system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hallet, Jr., R. W.; Gervais, R. L.

    1977-10-01

    An active system analysis and integration effort has been maintained. These activities have included the transformation of initial program requirements into a preliminary system design, the evolution of subsystem requirements which lay the foundation for subsystem design and test activity, and the overseeing of the final preliminary design effort to ensure that the subsystems are operationally compatible and capable of producing electricity at the lowest possible cost per unit of energy. Volume II of the Preliminary Design Report presents the results of the overall system effort that went on during this contract. The effort is assumed to include not only the total system definition and design but also all subsystem interactions.

  17. Wind erosion of soils burned by wildfire

    Science.gov (United States)

    N. S. Wagenbrenner; M. J. Germino; B. K. Lamb; R. B. Foltz; P. R. Robichaud

    2011-01-01

    Wind erosion and aeolian transport processes are largely unstudied in the post-wildfire environment, but recent studies have shown that wind erosion can play a major role in burned landscapes. A wind erosion monitoring system was installed immediately following a wildfire in southeastern Idaho, USA to measure wind erosion from the burned area (Figure 1). This paper...

  18. KwaZulu-Natal coastal erosion events of 2006/2007 and 2011: A predictive tool?

    Directory of Open Access Journals (Sweden)

    Alan Smith

    2013-03-01

    Full Text Available Severe coastal erosion occurred along the KwaZulu-Natal coastline between mid-May and November 2011. Analysis of this erosion event and comparison with previous coastal erosion events in 2006/2007 offered the opportunity to extend the understanding of the time and place of coastal erosion strikes. The swells that drove the erosion hotspots of the 2011 erosion season were relatively low (significant wave heights were between 2 m and 4.5 m but of long duration. Although swell height was important, swell-propagation direction and particularly swell duration played a dominant role in driving the 2011 erosion event. Two erosion hotspot types were noted: sandy beaches underlain by shallow bedrock and thick sandy beaches. The former are triggered by high swells (as in March 2007 and austral winter erosion events (such as in 2006, 2007 and 2011. The latter become evident later in the austral winter erosion cycle. Both types were associated with subtidal shore-normal channels seaward of megacusps, themselves linked to megarip current heads. This 2011 coastal erosion event occurred during a year in which the lunar perigee sub-harmonic cycle (a 4.4-year cycle peaked, a pattern which appears to have recurred on the KwaZulu-Natal coast. If this pattern proves true, severe coastal erosion may be expected in 2015. Evidence indicates that coastal erosion is driven by the lunar nodal cycle peak but that adjacent lunar perigee sub-harmonic peaks can also cause severe coastal erosion. Knowing where and when coastal erosion may occur is vital for coastal managers and planners.

  19. Analysis of CZF ultrasound in treatment of cervical erosion%海极星聚焦超声治疗宫颈糜烂分析

    Institute of Scientific and Technical Information of China (English)

    孙会云

    2013-01-01

    目的:探讨海极星治疗宫颈糜烂的效果方法:对9000例患者进行海极星治疗结果:本组病人随访3-6个月,全部愈合8590例,效果不佳20例,其余大部分愈合,总有效率95%结论:海极星是治疗宫颈糜烂一种简单,实用,有效的新方法%Objective:to explore the sea pole star in the treatment of cervical erosion effect Method:for sea pole star treatment on 9000 patients Results:al the patients were fol owed up for 3-6 months, al healed in 8600 cases, poor results in 20 cases, most of the rest of the healing, the total efficiency of 99.7%. conclusion:seapostar treating cervical erosion is a simple, practical, the new method is effective.

  20. STUDY ON EROSION RESISTANCE PROPERTIES OF O'-SIALON-BN IN MOLTEN STEEL

    Institute of Scientific and Technical Information of China (English)

    Q. Zhen; W.Z. Ding; W.C. Li

    2001-01-01

    The erosion resistance properties of O'-Sialon-BN in molten steel are investigated in this work. According to experimental results and theoretical analysis, BN in O'Sialon-BN plays an important role in molten steel erosion resistance. And the erosion kinetics of the O'-Sialon-BN composites in molten steel is controlled by two stages:the first one is controlled by chemical reaction taking place on the interface; the second one is controlled by diffusion. The erosion surface of the materials is also investigated with fractal theory. The results show that the fractal dimensions of the erosion surface vary with erosion time from a linear way to parabolic way, which relates to the change of erosion mechanism from interface chemical reaction to diffusion.

  1. Preliminary environmental analysis of a geopressured-geothermal test well in Brazoria County, Texas

    Energy Technology Data Exchange (ETDEWEB)

    White, W.A.; McGraw, M.; Gustavson, T.C.; Meriwether, J.

    1977-11-16

    Preliminary environmental data, including current land use, substrate lithology, soils, natural hazards, water resources, biological assemblages, meteorological data, and regulatory considerations have been collected and analyzed for approximately 150 km/sup 2/ of land near Chocolate Bayou, Brazoria County, Texas, in which a geopressured-geothermal test well is to be drilled in the fall of 1977. The study was designed to establish an environmental data base and to determine, within spatial constraints set by subsurface reservoir conditions, environmentally suitable sites for the proposed well. Preliminary analyses of data revealed the eed for focusing on the following areas: potential for subsidence and fault activation, susceptibility of test well and support facilities to fresh- and salt-water flooding, possible effects of produced saline waters on biological assemblages and groundwaer resources, distribution of expansive soils, and effect of drilling and associated support activities on known archeological-cultural resources.

  2. Preliminary Regional Analysis of the Kaguya Lunar Radar Sounder (LRS) Data through Eastern Mare Imbrium

    Science.gov (United States)

    Cooper, B.L.; Antonenko, I.; Yamaguchi, Y.; Osinski, G.; Ono, T.; Ku-mamoto, A.

    2009-01-01

    The Lunar Radar Sounder (LRS) experiment on board the Kaguya spacecraft is observing the subsurface structure of the Moon, using ground-penetrating radar operating in the frequency range of 5 MHz [1]. Because LRS data provides in-formation about lunar features below the surface, it allows us to improve our understanding of the processes that formed the Moon, and the post-formation changes that have occurred (such as basin formation and volcanism). We look at a swath of preliminary LRS data, that spans from 7 to 72 N, and from 2 to 10 W, passing through the eastern portion of Mare Imbrium (Figure 1). Using software, designed for the mineral exploration industry, we produce a preliminary, coarse 3D model, showing the regional structure beneath the study area. Future research will involve smaller subsets of the data in regions of interest, where finer structures, such as those identified in [2], can be studied.

  3. 预应力混凝土氯盐侵蚀模型及耐久性分析%Analysis of the Chloride Erosion Model and Durability of Prestressed Concrete

    Institute of Scientific and Technical Information of China (English)

    刘荣桂; 崔钊玮; 陆春华; 殷惠光; 陈妤; 李静

    2012-01-01

    针对氯盐环境下氯离子侵蚀预应力混凝土结构这一耐久性问题,介绍了国内外有关混凝土氯盐侵蚀模型的研究成果,分析评价了几种典型的扩散方程,并改进了预应力混凝土氯离子侵蚀模型.以氯离子扩散速度、表面氯离子浓度以及保护层厚度为分析变量建立了耐久性可靠度分析模型.应采取综合措施提高预应力混凝土耐久性.%With regard to the durability problem of prestressed concrete structure under chlorine ion erosion,progress and achievement of modeling of chloride ingress at home and aboard were summarized,and several typical diffusion equations analyzed,and the prestressed concrete chloride ions erosion model improved.By taking chloride diffusion velocity,surface chloride concentration and thickness of concrete cover,as Analysis variables,the durability reliability analysis model was established.It was proposed that comprehensive measures should be taken to improve the prestressed concrete durability.

  4. Preliminary results from fault-slip analysis of the Pärvie postglacial fault zone

    Science.gov (United States)

    Baeckstroem, A.; Rantakokko, N.; Jonsson, E.; Ask, M. V.

    2012-12-01

    We aim at constraining the paleostress field of a special type of intraplate faulting, triggered by the retreat of continental glaciers along the longest known post-glacial fault (PGF), the Pärvie PGF. It is 155 km long and consists of a series of 3-10 m high fault scarps; most of them west-facing and north-northeast trending. The fault displaces postglacial sediments (Lagerbäck 1979). The displacement is interpreted to have been caused by a great earthquake (M≤8.2; Arvidson 1996) at the end or just after the last glaciation (~10 ky B.P.). The fault zone is still active on the microseismic scale; however, the regional stress field is yet relatively poorly constrained (Lindblom 2011). The PGFs in North Fennoscandia may have formed in the Precambrian (e.g. Olesen et al. 1992). Nevertheless, the stress history of the Pärvie PGF before the last glaciation is poorly known. To reconstruct its stress history, we have performed fault-slip analysis of fault slip data that reactivated the fault. We have collected fault slip data from a profile of outcrops across the Pärvie PGF in the valley wall in the Corruvagge valley in northern Sweden. Cross-cutting relationships, fracture mineralization and brittle behavior of the rock have been used to unravel the brittle history of the fault. At least three paleostress regimes have been identified. Preliminary results indicate that early formed brittle structures where the fracture filling minerals are dominated by amphibole and plagioclase were subjected to a strike-slip stress regime with a small component of extension. The two relatively younger stages of the brittle development of this structure can be related to a compressive respectively an extensional stress-field. The mineral assemblage in the two later brittle deformations is dominated by epidote. Several fractures from the younger stages are cross-cutting and displacing the older events. The mineral assemblages related to the younger stages show several fault

  5. Crystallization and preliminary X-ray diffraction analysis of HML, a lectin from the red marine alga Hypnea musciformis

    Energy Technology Data Exchange (ETDEWEB)

    Nagano, Celso S.; Gallego del Sol, Francisca [Instituto de Biomedicina de Valencia, CSIC, Valencia (Spain); Cavada, Benildo S.; Nascimento, Kyria Santiago Do [Departamento de Bioquímica e Biologia Molecular, Universidade Federal do Ceará, Fortaleza, CE 60451-970 (Brazil); Nunes, Eudismar Vale; Sampaio, Alexandre H. [Laboratorio de Bioquímica Marinha, Departamento de Engenharia de Pesca, Universidade Federal do Ceará, Fortaleza, CE 60451-970 (Brazil); Calvete, Juan J., E-mail: jcalvete@ibv.csic.es [Instituto de Biomedicina de Valencia, CSIC, Valencia (Spain)

    2005-11-01

    The crystallization and preliminary X-ray diffraction analysis of a red marine alga lectin isolated from H. musciformis is reported. HML, a lectin from the red marine alga Hypnea musciformis, defines a novel lectin family. Orthorhombic crystals of HML belonging to space group P2{sub 1}2{sub 1}2{sub 1} grew within three weeks at 293 K using the hanging-drop vapour-diffusion method. A complete data set was collected at 2.4 Å resolution. HML is the first marine alga lectin to be crystallized.

  6. Test for Nonlinear Input Output Relations in SISO Systems by Preliminary Data Analysis

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...... are developed. They are much more robust, especially the sinus method which is reliable also for colored, heavy tailed or skew distributed noise....

  7. Heel erosion and other interdigital disorders in dairy cows

    DEFF Research Database (Denmark)

    Enevoldsen, Carsten; Gröhn, Y.T.; Thysen, Iver

    1991-01-01

    Epidemiologic associations between variables obtainable from dairy cow records and the occurrence of heel erosion, interdigital dermatitis, and interdigital hyperplasia at claw trimmings were estimated with multivariable logistic regression analysis on data from 1170 and 542 cows in lactation 1...... and lactations 2 to 9, respectively. In the 17 herds, heel erosion, interdigital dermatitis, and hyperplasia occurred among 43.8, 4.5, and .9% of cows in lactation 1 and among 69.1, 7.6 and 5.9% of cows in lactations 2 to 9, respectively. Severity of heel erosion increased with parity, and risk increased...... with stage of lactation. Strong seasonal effects were present. Various combinations of veterinary treatments were associated with heel erosion and hyperplasia depending on parity, stage of lactation, and the presence of other claw disorders. In contrast, veterinary treatment had a protective effect...

  8. Determination of erosion rates with cosmogenic 26Al

    Science.gov (United States)

    Strack, E.; Heisinger, B.; Dockhorn, B.; Hartmann, F. J.; Korschinek, G.; Nolte, E.; Morteani, G.; Petitjean, C.; Neumaier, S.

    1994-06-01

    A preliminary depth profile of the long-lived cosmogenic radioisotope 26Al(5 +) in quartz samples from pre-drill cores of the continental deep drill core (KTB) at Egerer Waldhaeusl, Poppenreuth and Puellersreuth was measured with accelerator mass spectrometry (AMS). These drill cores are situated in Upper Palatinate (Oberpfalz, Germany) in a region with very low erosion. The cosmogenic production of 26Al in quartz was calculated. The calculation is based on two reactions: spallation reactions on silicon in the first few meters and the capture reaction of slow negative muons Si(μ -, ν μxn, which is the dominant process below a few meters. The branching ratio of the μ - capture reaction in silicon to 26Al(5 +) was determined by irradiating a quartz sample with slow negative muons at PSI in Villigen (Switzerland) and by measuring the produced 26Al by AMS. Calculations of 26Al depth profiles taking erosion into account were performed. The agreement between the depth profile calculated with no erosion and the measured preliminary profile is very satisfactory.

  9. Tolerable soil erosion in Europe

    Science.gov (United States)

    Verheijen, Frank; Jones, Bob; Rickson, Jane; Smith, Celina

    2010-05-01

    Soil loss by erosion has been identified as an important threat to soils in Europe* and is recognised as a contributing process to soil degradation and associated deterioration, or loss, of soil functioning. From a policy perspective, it is imperative to establish well-defined baseline values to evaluate soil erosion monitoring data against. For this purpose, accurate baseline values - i.e. tolerable soil loss - need to be differentiated at appropriate scales for monitoring and, ideally, should take soil functions and even changing environmental conditions into account. The concept of tolerable soil erosion has been interpreted in the scientific literature in two ways: i) maintaining the dynamic equilibrium of soil quantity, and ii) maintaining biomass production, at a location. The first interpretation ignores soil quality by focusing only on soil quantity. The second approach ignores many soil functions by focusing only on the biomass (particularly crop) production function of soil. Considering recognised soil functions, tolerable soil erosion may be defined as 'any mean annual cumulative (all erosion types combined) soil erosion rate at which a deterioration or loss of one or more soil functions does not occur'. Assumptions and problems of this definition will be discussed. Soil functions can generally be judged not to deteriorate as long as soil erosion does not exceed soil formation. At present, this assumption remains largely untested, but applying the precautionary principle appears to be a reasonable starting point. Considering soil formation rates by both weathering and dust deposition, it is estimated that for the majority of soil forming factors in most European situations, soil formation rates probably range from ca. 0.3 - 1.4 t ha-1 yr-1. Although the current agreement on these values seems relatively strong, how the variation within the range is spatially distributed across Europe and how this may be affected by climate, land use and land management

  10. Remote sensing and spatially distributed erosion models as a tool to really understand biocrust effects on soil erosion

    Science.gov (United States)

    Rodriguez-Caballero, Emilio; Chamizo, Sonia; Román, Raul; Roncero, Beatriz; Weber, Bettina; Jetten, Victor; Cantón, Yolanda

    2016-04-01

    Since publication of the first Ecological Stides volume on biological soil crusts (biocrusts) in 2003, numerous studies have been conducted trying to understand the role of biocrusts in runoff generation and water erosion. Most of them considered these communities as one of the most important stabilizing factors dryland regions. However, these studies were concentrated only on patch or hillslope scales, and there is a lack of information on biocrust interactions with other surface components at catchment scale. Even on fine textured soils, where biocrusts increase water infiltration, they act as runoff source when compared to vegetation. Run-on from biocrusted areas may be harvested by downslope vegetation, but sometimes it may promote downslope erosion. Thus, to really understand the effect of biocrusts on soil erosion, studies on larger scales, preferably on a catchment scale are needed. For this we developed a new approach, based on field measurements and remote sensing techniques, to include biocrust effects in physically-based runoff and erosion modeling. Doing this we were able to analyze how runoff generated in biocrust areas is redistributed within the landscape and its effect on catchment water erosion. The Limburg Soil Erosion Model (LISEM) was used to parameterize and simulate the effects of biocrusts on soil erosion in a small badlands catchment, where biocrusts represent one of the main surface components. Biocrust stability and cohesion were measured in the field, their hydrological properties were obtained from runoff plots, and their cover and spatial distribution was estimated from a hyperspectral image by linear mixture analysis. Then, the model was run under different rainfall intensities and final runoff and erosion rates were compared with field data measured at the catchment outlet. Moreover, these results were compared with the hypothetical scenario in which biocrusts were removed, simulating human disturbances or climatic change effects on

  11. Erosion characteristics and horizontal variability for small erosion depths in the Sacramento-San Joaquin River Delta, California, USA

    Science.gov (United States)

    Schoellhamer, David H.; Manning, Andrew J.; Work, Paul

    2017-01-01

    Erodibility of cohesive sediment in the Sacramento-San Joaquin River Delta (Delta) was investigated with an erosion microcosm. Erosion depths in the Delta and in the microcosm were estimated to be about one floc diameter over a range of shear stresses and times comparable to half of a typical tidal cycle. Using the conventional assumption of horizontally homogeneous bed sediment, data from 27 of 34 microcosm experiments indicate that the erosion rate coefficient increased as eroded mass increased, contrary to theory. We believe that small erosion depths, erosion rate coefficient deviation from theory, and visual observation of horizontally varying biota and texture at the sediment surface indicate that erosion cannot solely be a function of depth but must also vary horizontally. We test this hypothesis by developing a simple numerical model that includes horizontal heterogeneity, use it to develop an artificial time series of suspended-sediment concentration (SSC) in an erosion microcosm, then analyze that time series assuming horizontal homogeneity. A shear vane was used to estimate that the horizontal standard deviation of critical shear stress was about 30% of the mean value at a site in the Delta. The numerical model of the erosion microcosm included a normal distribution of initial critical shear stress, a linear increase in critical shear stress with eroded mass, an exponential decrease of erosion rate coefficient with eroded mass, and a stepped increase in applied shear stress. The maximum SSC for each step increased gradually, thus confounding identification of a single well-defined critical shear stress as encountered with the empirical data. Analysis of the artificial SSC time series with the assumption of a homogeneous bed reproduced the original profile of critical shear stress, but the erosion rate coefficient increased with eroded mass, similar to the empirical data. Thus, the numerical experiment confirms the small-depth erosion hypothesis. A linear

  12. A Preliminary Analysis of Dose Rates Associated with ITER CVCS Equipment/Area Location

    Energy Technology Data Exchange (ETDEWEB)

    Blakeman, Edward D [ORNL; Ilas, Dan [ORNL; Petrov, Andrei Y [ORNL

    2012-03-01

    A preliminary analysis of the ITER Chemical and Volume Control System (CVCS) Area was performed to assess dose rates outside the walls and ceiling of the facility after 1.5 years of operation at shutdown, 2 days, and 10 days after shutdown. For this purpose a simplified Monte Carlo computer model was developed using the MCNP (MCNP5 Ver. 1.51) code. Two components are included: the smaller filter tank and the larger ion exchanger. These pieces of equipment are associated with the Integrated Blanket ELM Divertor Primary Heat Transfer System, which will have the largest dose rates associated with activated corrosion products during operation in comparison with other systems. The ion exchanger contained two source regions, a 1.2-m-thick resin bed above a 0.55 m-thick skirt, and a 0.8-m-thick water region. The filter constituted an additional source. Thus the model consisted of three sources (filter, resin, water), homogeneously distributed within the appropriate source regions. However, much of the results (that address individual isotopes) are presented with the two sources in the ion exchanger combined. In these cases the sources are referred to as the 'ion exchanger source' and the 'filter source.' Dimensions for the facility and components, as well as source isotopes and strengths, and material densities, were supplied by US ITER. Because of its simplification, the model does not contain pipes. Consequently, radiation streaming through pipe penetrations, radiation emanating from the pipes, and shielding from the pipes were not considered in this analysis. Dose rates on the outside of two walls and the ceiling were calculated. The two walls are labeled as the 'long' wall (aligned with the X-axis) and the 'short' wall (aligned with the Y-axis). These walls and ceiling were nominally set to 30-cm-thick concrete. In the original analysis, standard concrete (2.3 g/cc density) was used. In addition to the shielding walls/ceiling, a

  13. 松嫩流域水土流失原因分析%FACTORS ANALYSIS ON SOIL AND WATER EROSION IN SONGNEN VALLEY

    Institute of Scientific and Technical Information of China (English)

    张秀池

    2000-01-01

    Songnen valley is one of the important commodity grain bases in China. But now, it becomes the worst region with water and soil erosion, which result in some serious consequences of the environment, as well as fluvial deposit, moreover, the grain yields dropped and inconvinient to the people to live there.%松嫩流域是我国重要商品粮基地之一,目前,松嫩流域已成为我国主要商品粮基地中水土流失最严重的地区,水土流失不仅影响粮食生产,而且泥沙淤积河道、恶化环境,给工业生产和交通运输及人民生命财产带来严重危害。

  14. Purification, crystallization and preliminary crystallographic analysis of KatB, a manganese catalase from Anabaena PCC 7120.

    Science.gov (United States)

    Bihani, Subhash Chandra; Chakravarty, Dhiman; Ballal, Anand

    2013-11-01

    Catalases are enzymes that play an important role in the detoxification of hydrogen peroxide (H2O2) in aerobic organisms. Among catalases, haem-containing catalases are ubiquitously distributed and their enzymatic mechanism is very well understood. On the other hand, manganese catalases that contain a bimanganese core in the active site have been less well characterized and their mode of action is not fully understood. The genome of Anabaena PCC 7120 does not show the presence of a haem catalase-like gene; instead, two ORFs encoding manganese catalases (Mn-catalases) are present. Here, the crystallization and preliminary X-ray crystallographic analysis of KatB, one of the two Mn-catalases from Anabaena, are reported. KatB was crystallized using the hanging-drop vapour-diffusion method with PEG 400 as a precipitant and calcium acetate as an additive. Diffraction data were collected in-house on an Agilent SuperNova system using a microfocus sealed-tube X-ray source. The crystal diffracted to 2.2 Å resolution at 100 K. The tetragonal crystal belonged to space group P4(1)2(1)2 (or enantiomer), with unit-cell parameters a = b = 101.87, c = 138.86 Å. Preliminary X-ray diffraction analysis using the Matthews coefficient and self-rotation function suggests the presence of a trimer in the asymmetric unit.

  15. Soil Erosion as a stochastic process

    Science.gov (United States)

    Casper, Markus C.

    2015-04-01

    The main tools to provide estimations concerning risk and amount of erosion are different types of soil erosion models: on the one hand, there are empirically based model concepts on the other hand there are more physically based or process based models. However, both types of models have substantial weak points. All empirical model concepts are only capable of providing rough estimates over larger temporal and spatial scales, they do not account for many driving factors that are in the scope of scenario related analysis. In addition, the physically based models contain important empirical parts and hence, the demand for universality and transferability is not given. As a common feature, we find, that all models rely on parameters and input variables, which are to certain, extend spatially and temporally averaged. A central question is whether the apparent heterogeneity of soil properties or the random nature of driving forces needs to be better considered in our modelling concepts. Traditionally, researchers have attempted to remove spatial and temporal variability through homogenization. However, homogenization has been achieved through physical manipulation of the system, or by statistical averaging procedures. The price for obtaining this homogenized (average) model concepts of soils and soil related processes has often been a failure to recognize the profound importance of heterogeneity in many of the properties and processes that we study. Especially soil infiltrability and the resistance (also called "critical shear stress" or "critical stream power") are the most important empirical factors of physically based erosion models. The erosion resistance is theoretically a substrate specific parameter, but in reality, the threshold where soil erosion begins is determined experimentally. The soil infiltrability is often calculated with empirical relationships (e.g. based on grain size distribution). Consequently, to better fit reality, this value needs to be

  16. Bentonite erosion. Laboratory studies

    Energy Technology Data Exchange (ETDEWEB)

    Jansson, Mats (Div. of Nuclear Chemistry, Royal Inst. of Technology, Stockholm (Sweden), School of Chemical Science and Engineering)

    2009-11-15

    This report covers the laboratory studies that have been performed at Nuclear Chemistry, KTH in the project 'Bentonite Erosion'. Many of the experiments in this report were performed to support the work of the modelling group and were often relatively simple. One of the experiment series was performed to see the impact of gravity and concentration of mono- and di-valent cations. A clay suspension was prepared in a test tube. A net was placed in contact with the suspension, the test tube was filled with solutions of different concentrations and the system was left overnight to settle. The tube was then turned upside down and the behaviour was visually observed. Either the clay suspension fell through the net or stayed on top. By using this method surprisingly sharp determinations of the Critical Coagulation (Flocculation) Concentration (CCC/CFC) could be made. The CCC/CFC of Ca2+ was for sodium montmorillonite determined to be between 1 and 2 mM. An artificial fracture was manufactured in order to simulate the real case scenario. The set-up was two Plexiglas slabs separated by 1 mm thick spacers with a bentonite container at one side of the fracture. Water was pumped with a very low flow rate perpendicular to bentonite container and the water exiting the fracture was sampled and analyzed for colloid content. The bentonite used was treated in different ways. In the first experiment a relatively montmorillonite rich clay was used while in the second bentonite where only the readily soluble minerals had been removed was used. Since Plexiglas was used it was possible to visually observe the bentonite dispersing into the fracture. After the compacted bentonite (1,000 kg/m3) had been water saturated the clay had expanded some 12 mm out into the fracture. As the experiment progressed the clay expanded more out into the fracture and seemed to fractionate in two different phases with less material in the outmost phase. A dark rim which was later analyzed to contain

  17. Health Canada and the pharmaceutical industry: a preliminary analysis of the historical relationship.

    Science.gov (United States)

    Lexchin, Joel

    2013-11-01

    In the past two decades, Health Canada has been accused of favouring the pharmaceutical industry over the public in areas of pharmaceutical policy. This orientation has been tied to the introduction of user fees by the industry in 1994 that help finance key aspects of drug regulation. This paper provides a preliminary examination of the history of the relationship starting in 1939 until the mid-1980s in an attempt to discern whether 1994 really represented a key turning point. Clientele pluralism, a theory that explains the relationship between the state and interest groups, is used to explain the nature of the events described. Copyright © 2013 Longwoods Publishing.

  18. Energy efficient engine flight propulsion system preliminary analysis and design report

    Science.gov (United States)

    Gardner, W. B.

    1979-01-01

    A flight propulsion system preliminary design was established that meets the program goals of at least a 12 percent reduction in thrust specific fuel consumption, at least a five percent reduction in direct operating cost, and one-half the performance deterioration rate of the most efficient current commercial engines. The engine provides a high probability of meeting the 1978 noise rule goal. Smoke and gaseous emissions defined by the EPA proposed standards for engines newly certified after 1 January 1981 are met with the exception of NOx, despite incorporation of all known NOx reduction technology.

  19. Preliminary application of turn-by-turn data analysis to the SSRF storage ring

    Institute of Scientific and Technical Information of China (English)

    CHEN Jian-Hui; ZHAO Zhen-Tang

    2009-01-01

    There is growing interest in utilizing the beam position monitor turn-by-turn (TBT) data to debug accelerators. TBT data can be used to determine the linear optics, coupled optics and nonlinear behaviors of the storage ring lattice. This is not only a useful complement to other methods of determining the linear optics such as LOCO, but also provides a possibility to uncover more hidden phenomena. In this paper, a preliminary application of a β function measurement to the SSRF storage ring is presented.

  20. Exploring the relationship between gully erosion and rainfall erosivity

    Science.gov (United States)

    Campo, Miguel; Casalí, Javier; Giménez, Rafael

    2016-04-01

    Rainfall erosivity plays and important role in gully erosion. However, there are few studies that explore this relationship. The main purpose of this work is to analyse the link between observed gully erosion rates and rainfall erosivity. However, in order to get a suitable and comparable set of daily rainfall erosivity data, we firstly evaluate the performance of several daily rainfall erosivity models to estimate the daily accumulated RUSLE EI30 index. One 300 ha watershed (El Cantalar) located in Navarre (Spain) was selected to carry out field studies. A meteorological station located 10 km appart from the experimental site provided daily precipitation records since 1930 to 2009 and also 10min records since 1991 to 2009. In this watershed a total of 35 gully headcuts developed in cohesive soil were monitored. Aerial photographic stereo-pairs covering the study area were used for the survey. These were taken in five different years and at different spatial scales each time: 1956 (1: 34,000), 1967 (1:17,500), 1982 (1:13,500), 2003 (1:20,000) and 2006 (1:2000). Manual restitution of photographs was carried out. 1m resolution DEMs were obtained by triangular interpolation (Triangular Irregular Network) and then used to characterize gully headcuts. Moreover, from the aerial photos and the DEMs, ortho-photographs with a final resolution of 0.40 m were created. The geocoding of the scenes had a Root Mean Square error of less than 0.5 m both in planimetry and altimetry. Furthermore, using the DEMs and the ortho-photographs, volumetric headcut retreat rates for each period were calculated as the product of the lineal retreat and a representative section of the headcut. Daily accumulated RUSLE EI30 index was calculated in a conventional way from records of precipitation every 10 minutes for the period 1991-2009; these results were used as reference data. In addition, for the same period, this index was estimated with daily precipitation records through several models

  1. Interfacial Instability during Granular Erosion.

    Science.gov (United States)

    Lefebvre, Gautier; Merceron, Aymeric; Jop, Pierre

    2016-02-12

    The complex interplay between the topography and the erosion and deposition phenomena is a key feature to model granular flows such as landslides. Here, we investigated the instability that develops during the erosion of a wet granular pile by a dry dense granular flow. The morphology and the propagation of the generated steps are analyzed in relation to the specific erosion mechanism. The selected flowing angle of the confined flow on a dry heap appears to play an important role both in the final state of the experiment, and for the shape of the structures. We show that the development of the instability is governed by the inertia of the flow through the Froude number. We model this instability and predict growth rates that are in agreement with the experiment results.

  2. Integration of transport concepts for risk assessment of pesticide erosion.

    Science.gov (United States)

    Yang, Xiaomei; Van Der Zee, Sjoerd E A T M; Gai, Lingtong; Wesseling, Jan G; Ritsema, Coen J; Geissen, Violette

    2016-05-01

    Environmental contamination by agrochemicals has been a large problem for decades. Pesticides are transported in runoff and remain attached to eroded soil particles, posing a risk to water and soil quality and human health. We have developed a parsimonious integrative model of pesticide displacement by runoff and erosion that explicitly accounts for water infiltration, erosion, runoff, and pesticide transport and degradation in soil. The conceptual framework was based on broadly accepted assumptions such as the convection-dispersion equation and lognormal distributions of soil properties associated with transport, sorption, degradation, and erosion. To illustrate the concept, a few assumptions are made with regard to runoff in relatively flat agricultural fields: dispersion is ignored and erosion is modelled by a functional relationship. A sensitivity analysis indicated that the total mass of pesticide associated with soil eroded by water scouring increased with slope, rain intensity, and water field capacity of the soil. The mass of transported pesticide decreased as the micro-topography of the soil surface became more distinct. The timing of pesticide spraying and rate of degradation before erosion negatively affected the total amount of transported pesticide. The mechanisms involved in pesticide displacement, such as runoff, infiltration, soil erosion, and pesticide transport and decay in the topsoil, were all explicitly accounted for, so the mathematical complexity of their description can be high, depending on the situation.

  3. A method to detect soil carbon degradation during soil erosion

    Directory of Open Access Journals (Sweden)

    F. Conen

    2009-11-01

    Full Text Available Soil erosion has been discussed intensively but controversial both as a significant source or a significant sink of atmospheric carbon possibly explaining the gap in the global carbon budget. One of the major points of discussion has been whether or not carbon is degraded and mineralized to CO2 during detachment, transport and deposition of soil material. By combining the caesium-137 (137Cs approach (quantification of erosion rates with stable carbon isotope signatures (process indicator of mixing versus degradation of carbon pools we were able to show that degradation of carbon occurs during soil erosion processes at the investigated mountain grasslands in the central Swiss Alps (Urseren Valley, Canton Uri. Transects from upland (erosion source to wetland soils (erosion sinks of sites affected by sheet and land slide erosion were sampled. Analysis of 137Cs yielded an input of 2 and 4.6 tha−1 yr−1 of soil material into the wetlands sites. Assuming no degradation of soil organic carbon during detachment and transport, carbon isotope signature of soil organic carbon in the wetlands could only be explained with an assumed 500–600 and 350–400 years of erosion input into the wetlands Laui and Spissen, respectively. The latter is highly unlikely with alpine peat growth rates indicating that the upper horizons might have an age between 7 and 200 years. While we do not conclude from our data that eroded soil organic carbon is generally degraded during detachment and transport, we propose this method to gain more information on process dynamics during soil erosion from oxic upland to anoxic wetland soils, sediments or water bodies.

  4. A method to detect soil carbon degradation during soil erosion

    Directory of Open Access Journals (Sweden)

    C. Alewell

    2009-06-01

    Full Text Available Soil erosion has been discussed intensively but controversial both as a significant source or a significant sink of atmospheric carbon possibly explaining the gap in the global carbon budget. One of the major points of discussion has been whether or not carbon is degraded and mineralized to CO2 during detachment, transport and deposition of soil material. By combining the caesium-137 (137Cs approach (quantification of erosion rates with stable carbon isotope signatures (process indicator of mixing versus degradation of carbon pools we were able to show that degradation of carbon occurs during soil erosion processes at the investigated mountain grasslands in the central Swiss Alps (Urseren Valley, Canton Uri. Transects from upland (erosion source to wetland soils (erosion sinks of sites affected by sheet and land slide erosion were sampled. Analysis of 137Cs yielded an input of 2 and 2.6 t ha−1 yr−1 of soil material into the wetlands sites. Assuming no degradation of soil organic carbon during detachment and transport, carbon isotope signature of soil organic carbon in the wetlands could only be explained with an assumed 800 and 400 years of erosion input into the wetlands. The latter is highly unlikely with alpine peat growth rates indicating that the upper horizons might have an age between 7 and 200 years. While we do not conclude from our data that eroded soil organic carbon is generally degraded during detachment and transport, we propose this method to gain more information on process dynamics during soil erosion from oxic upland to anoxic wetland soils, sediments or water bodies.

  5. Soil erosion in Slovene Istria

    Directory of Open Access Journals (Sweden)

    Matjaž Mikoš

    2009-12-01

    Full Text Available From the end of nineties of the 20th century, intense hydrologic and geomorphologic research is taking place in the Slovene Istria. As a part of this research also studies on soil erosion were undertaken in the period from 2005 to 2008. The field measurements were under taken onclosed 1m2 large erosion plots under three different land uses (on bare soils in an olive grove, on an overgrown meadow, in a forest, placed south of the Marezige village in the Rokava River basin.We show weekly measurements of surface erosion (interrill erosion for the period of 13 months (the end of March 2005 – the end of April 2006, as well as monthly and seasonal averages together with selected linear statistical correlations between soil erosion and weather parameters.From May 2005 to April 2006 the interrill erosion on bare soils in an olive grove with an inclination of 5.5° amounted to 9013 g/m2 (90 t/ha that corresponds to surface lowering rate of 8.5 mm/yr; on an overgrown meadow with an inclination of 9.4° it amounted to 168 g/m2 (1,68 t/ha that corresponds to surface lowering rate of 0.16 mm//yr; and in a forest with an inclination of 7.8° it amounted to 391 g/m2 (3,91 t/ha and in a forest with an inclination of 21.4° it amounted to 415 g/m2 (4,15 t/ha, respectively, that corresponds to surface lowering rate of 0.4 mm/yr.

  6. SINGLE-SHELL TANK INTEGRITY PROJECT ANALYSIS OF RECORD-PRELIMINARY MODELING PLAN FOR THERMAL AND OPERATING LOADS

    Energy Technology Data Exchange (ETDEWEB)

    RAST RS; RINKER MW; BAPANAALLI SK; DEIBLER JE; GUZMAN-LEONG CE; JOHNSON KI; KARRI NK; PILLI SP; SANBORN SE