WorldWideScience

Sample records for preliminary design guidelines

  1. Preliminary format design guidelines

    DEFF Research Database (Denmark)

    Tosello, Guido; Calaon, Matteo; Nørregaard, J.

    2013-01-01

    The strategic research centre PolyNano aims at becoming the Danish competence centre for production-ready fabrication of polymer, nano-scale lab-on-a-chip (LoC) devices. In order to provide a competitive edge for Danish biotech companies launching LoC products by removal of the technology barrier...... between lab-scale proof-of-principle and high-volume low-cost production of LoCs, the PolyNano project will develop a readily accessible fabrication platform for those companies aiming at developing and manufacturing their LoCs design.......The strategic research centre PolyNano aims at becoming the Danish competence centre for production-ready fabrication of polymer, nano-scale lab-on-a-chip (LoC) devices. In order to provide a competitive edge for Danish biotech companies launching LoC products by removal of the technology barrier...

  2. Preliminary Guideline for the High Temperature Structure Integrity Assessment Procedure Part I. High Temperature Structure Design Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Han; Kim, J. B.; Lee, H. Y.; Park, C. G.; Joo, Y. S.; Koo, G. H.; Kim, S. H

    2007-02-15

    A preliminary guideline for the design and evaluation of LMR high temperature structure is presented based upon ASME B and PV Code, Section III, Subsection NH. The main contents of this guideline are the materials, general design, vessel, piping, core support structure, pumps, valves, fabrication, examination, and testing for the class 1 components. The ratcheting evaluation, enhanced creep assessment, welds design and evaluation, inelastic analysis approach, piping design alternatives, and bellows design method are described in appendices. A user of this guideline should follow the essential procedures and may refer to other pertinent codes, standards, laws, regulations, or other pertinent documents when this guideline does not lead to proper design of the structure. While this guideline adopts major procedures of Subsection NH, it refers to the RCC-MR and/or DDS in some amount for the items where these codes have excellency to improve this guideline.

  3. D 59 Design Guidelines

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Lamberti, Alberto

    The present guidelines are specifically dedicated to Low Crested Structures on attempt to provide methodological tools both for the engineering design of structures and for prediction of performance and environmental impacts. It is anticipated that the guidelines will provide valuable inputs to c...

  4. D 59 Design Guidelines

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Lamberti, Alberto

    The present guidelines are specifically dedicated to Low Crested Structures on attempt to provide methodological tools both for the engineering design of structures and for prediction of performance and environmental impacts. It is anticipated that the guidelines will provide valuable inputs to c...

  5. FDH radiological design review guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Millsap, W.J.

    1998-09-29

    These guidelines discuss in more detail the radiological design review process used by the Project Hanford Management Contractors as described in HNF-PRO-1622, Radiological Design Review Process. They are intended to supplement the procedure by providing background information on the design review process and providing a ready source of information to design reviewers. The guidelines are not intended to contain all the information in the procedure, but at points, in order to maintain continuity, they contain some of the same information.

  6. Guidelines for glycol dehydrator design

    Energy Technology Data Exchange (ETDEWEB)

    Manning, W.P. (Coastal Chemical Co., Inc., Houston, TX (United States)); Wood, H.S. (Maloney-Crawford, Tulsa, OK (United States))

    1993-02-01

    Design guidelines can reduce hydrate-pluggage problems in the triethylene glycol (TEG) absorption process, thus eliminating downtime and lost production caused by water in natural gas. In addition, equipment can be properly sized by following prescribed troubleshooting tips. Guidelines are presented along with the instrumentation list to help one correctly size an absorber and reconcentrator. The paper discusses the following: the pump; gas-glycol heat exchanger; instrumentation; operating conditions; and dew point depression. Four design problems are then illustrated.

  7. K-Basins design guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Roe, N.R.; Mills, W.C.

    1995-06-01

    The purpose of the design guidelines is to enable SNF and K Basin personnel to complete fuel and sludge removal, and basin water mitigation by providing engineering guidance for equipment design for the fuel basin, facility modifications (upgrades), remote tools, and new processes. It is not intended to be a purchase order reference for vendors. The document identifies materials, methods, and components that work at K Basins; it also Provides design input and a technical review process to facilitate project interfaces with operations in K Basins. This document is intended to compliment other engineering documentation used at K Basins and throughout the Spent Nuclear Fuel Project. Significant provisions, which are incorporated, include portions of the following: General Design Criteria (DOE 1989), Standard Engineering Practices (WHC-CM-6-1), Engineering Practices Guidelines (WHC 1994b), Hanford Plant Standards (DOE-RL 1989), Safety Analysis Manual (WHC-CM-4-46), and Radiological Design Guide (WHC 1994f). Documents (requirements) essential to the engineering design projects at K Basins are referenced in the guidelines.

  8. Roadway Design Guidelines and Project Acknowledgements

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Design guidelines and recommendations for planning and delivering surface transportation projects on Service lands. The main holding (Roadway Design Guidelines) is a...

  9. Noise from high speed maglev systems: Noise sources, noise criteria, preliminary design guidelines for noise control, and recommendations for acoustical test facility for maglev research

    Science.gov (United States)

    Hanson, C. E.; Abbot, P.; Dyer, I.

    1993-01-01

    Noise levels from magnetically-levitated trains (maglev) at very high speed may be high enough to cause environmental noise impact in residential areas. Aeroacoustic sources dominate the sound at high speeds and guideway vibrations generate noticeable sound at low speed. In addition to high noise levels, the startle effect as a result of sudden onset of sound from a rapidly moving nearby maglev vehicle may lead to increased annoyance to neighbors of a maglev system. The report provides a base for determining the noise consequences and potential mitigation for a high speed maglev system in populated areas of the United States. Four areas are included in the study: (1) definition of noise sources; (2) development of noise criteria; (3) development of design guidelines; and (4) recommendations for a noise testing facility.

  10. Design guidelines for mini-roundabouts

    CSIR Research Space (South Africa)

    Emslie, I

    1997-03-01

    Full Text Available This report presents guidelines to assist local authorities and traffic engineers with a uniform approach to the design and implementation of mini-roundabouts. It is recommended that these guidelines be read in conjunction with the National...

  11. Design Guidelines for Low Crested Structures

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Lamberti, Alberto

    2004-01-01

    The paper presents an overview of the design guidelines for low crested structures (LCS's) to be applied in coastal protection schemes. The design guidelines are formulated as a part of the research project: Environmental Design of Low Crested Coastal Defence Structures (DELOS) within the EC 5FP ...

  12. Environmental Design Guidelines for Low Crested Coastal Structures

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Hawkins, Stephen J.; Zanuttigh, Barbara

    changes and beach value, which clearly exists based on EC research experiences and particularly on results obtained by DELOS Project (www.delos.unibo.it) for Low Crested Structures (LCSs), suggests the necessity of integrated approaches and thus the relevance of design guidelines covering: structure...... (Chapters 1-10) contains the description of the design methodology, from the preliminary identification of design alternatives till the selection of the sustainable scheme and its construction. The second part presents: the analysis of the performance of beach defences in DELOS study sites, which were...... methodological tools both for the engineering design of structures and for prediction of performance and environmental impacts of such structures. It is anticipated that the guidelines will provide valuable inputs to coastal zone management plans. The target audience for this set of guidelines is consulting...

  13. KALIMER preliminary conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kim, Y. J.; Kim, Y. G. and others

    2000-08-01

    This report, which summarizes the result of preliminary conceptual design activities during Phase 1, follows the format of safety analysis report. The purpose of publishing this report is to gather all of the design information developed so far in a systematic way so that KALIMER designers have a common source of the consistent design information necessary for their future design activities. This report will be revised and updated as design changes occur and more detailed design specification is developed during Phase 2. Chapter 1 describes the KALIMER Project. Chapter 2 includes the top level design requirements of KALIMER and general plant description. Chapter 3 summarizes the design of structures, components, equipment and systems. Specific systems and safety analysis results are described in the remaining chapters. Appendix on the HCDA evaluation is attached at the end of this report.

  14. Healthy Eating Design Guidelines for School Architecture

    OpenAIRE

    Huang, Terry T-K; Sorensen, Dina; Davis, Steven; Frerichs, Leah; Brittin, Jeri; Celentano, Joseph; Callahan, Kelly; Trowbridge, Matthew J.

    2013-01-01

    We developed a new tool, Healthy Eating Design Guidelines for School Architecture, to provide practitioners in architecture and public health with a practical set of spatially organized and theory-based strategies for making school environments more conducive to learning about and practicing healthy eating by optimizing physical resources and learning spaces. The design guidelines, developed through multidisciplinary collaboration, cover 10 domains of the school food environment (eg, cafeteri...

  15. Design Guidelines for CAI Authoring Systems.

    Science.gov (United States)

    Hunka, S.

    1989-01-01

    Discussion of the use of authoring systems for courseware development focuses on guidelines to be considered when designing authoring systems. Topics discussed include allowing a variety of instructional strategies; interaction with peripheral processes such as student records; the editing process; and human factors in computer interface design,…

  16. Physical Activity Design Guidelines for School Architecture.

    Directory of Open Access Journals (Sweden)

    Jeri Brittin

    Full Text Available Increasing children's physical activity at school is a national focus in the U.S. to address childhood obesity. While research has demonstrated associations between aspects of school environments and students' physical activity, the literature currently lacks a synthesis of evidence to serve as a practical, spatially-organized resource for school designers and decision-makers, as well as to point to pertinent research opportunities. This paper describes the development of a new practical tool: Physical Activity Design Guidelines for School Architecture. Its aims are to provide architects and designers, as well as school planners, educators, and public health professionals, with strategies for making K-12 school environments conducive to healthy physical activity, and to engage scientists in transdisciplinary perspectives toward improved knowledge of the school environment's impact. We used a qualitative review process to develop evidence-based and theory-driven school design guidelines that promote increased physical activity among students. The design guidelines include specific strategies in 10 school design domains. Implementation of the guidelines is expected to enable students to adopt healthier physical activity behaviors. The tool bridges a translational gap between research and environmental design practice, and may contribute to setting new industry and education standards.

  17. Physical Activity Design Guidelines for School Architecture

    Science.gov (United States)

    Brittin, Jeri; Sorensen, Dina; Trowbridge, Matthew; Lee, Karen K.; Breithecker, Dieter; Frerichs, Leah; Huang, Terry

    2015-01-01

    Increasing children’s physical activity at school is a national focus in the U.S. to address childhood obesity. While research has demonstrated associations between aspects of school environments and students’ physical activity, the literature currently lacks a synthesis of evidence to serve as a practical, spatially-organized resource for school designers and decision-makers, as well as to point to pertinent research opportunities. This paper describes the development of a new practical tool: Physical Activity Design Guidelines for School Architecture. Its aims are to provide architects and designers, as well as school planners, educators, and public health professionals, with strategies for making K-12 school environments conducive to healthy physical activity, and to engage scientists in transdisciplinary perspectives toward improved knowledge of the school environment’s impact. We used a qualitative review process to develop evidence-based and theory-driven school design guidelines that promote increased physical activity among students. The design guidelines include specific strategies in 10 school design domains. Implementation of the guidelines is expected to enable students to adopt healthier physical activity behaviors. The tool bridges a translational gap between research and environmental design practice, and may contribute to setting new industry and education standards. PMID:26230850

  18. Physical Activity Design Guidelines for School Architecture.

    Science.gov (United States)

    Brittin, Jeri; Sorensen, Dina; Trowbridge, Matthew; Lee, Karen K; Breithecker, Dieter; Frerichs, Leah; Huang, Terry

    2015-01-01

    Increasing children's physical activity at school is a national focus in the U.S. to address childhood obesity. While research has demonstrated associations between aspects of school environments and students' physical activity, the literature currently lacks a synthesis of evidence to serve as a practical, spatially-organized resource for school designers and decision-makers, as well as to point to pertinent research opportunities. This paper describes the development of a new practical tool: Physical Activity Design Guidelines for School Architecture. Its aims are to provide architects and designers, as well as school planners, educators, and public health professionals, with strategies for making K-12 school environments conducive to healthy physical activity, and to engage scientists in transdisciplinary perspectives toward improved knowledge of the school environment's impact. We used a qualitative review process to develop evidence-based and theory-driven school design guidelines that promote increased physical activity among students. The design guidelines include specific strategies in 10 school design domains. Implementation of the guidelines is expected to enable students to adopt healthier physical activity behaviors. The tool bridges a translational gap between research and environmental design practice, and may contribute to setting new industry and education standards.

  19. Ship design methodologies of preliminary design

    CERN Document Server

    Papanikolaou, Apostolos

    2014-01-01

    This book deals with ship design and in particular with methodologies of the preliminary design of ships. The book is complemented by a basic bibliography and five appendices with useful updated charts for the selection of the main dimensions and other basic characteristics of different types of ships (Appendix A), the determination of hull form  from the data of systematic hull form series (Appendix B), the detailed description of the relational method for the preliminary estimation of ship weights (Appendix C), a brief review of the historical evolution of shipbuilding science and technology from the prehistoric era to date (Appendix D) and finally a historical review of regulatory developments of ship's damage stability to date (Appendix E).  The book can be used as textbook for ship design courses or as additional reading for university or college students of naval architecture courses and related disciplines; it may also serve as a reference book for naval architects, practicing engineers of rel...

  20. Development of human factors design review guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

    1997-10-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 12 refs., 5 figs., 2 tabs.

  1. Preliminary design data package. Appendix C

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-25

    The design requirements, design philosophy, method and assumptions, and preliminary computer-aided design of the Near-Term Hybrid Vehicle including its electric and heat power units, control equipment, transmission system, body, and overall vehicle characteristics are presented. (LCL)

  2. Guidelines for glycol dehydrator design; Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Manning, W.P. (Coastal Chemical Co., Inc., Houston, TX (United States)); Wood, H.S. (Maloney-Crawford, Tulsa, OK (United States))

    1993-01-01

    Better designs and instrumentation improve glycol dehydrator performance. This paper reports on these guidelines which emphasize efficient water removal from natural gas. Water, a common contaminant in natural gas, causes operational problems when it forms hydrates and deposits on solid surfaces. Result: plugged valves, meters, instruments and even pipelines. Simple rules resolve these problems and reduce downtime and maintenance costs.

  3. Design guidelines for wearable pointing devices

    Directory of Open Access Journals (Sweden)

    Joanne E. Zucco

    2016-07-01

    Full Text Available This paper presents design guidelines and recommendations for developing cursor manipulation interaction devices to be employed in a wearable context. The work presented in this paper is the culmination three usability studies designed to understand commercially available pointing (cursor manipulation devices suitable for use in a wearable context. The set of guidelines and recommendations presented are grounded on experimental and qualitative evidence derived from three usability studies and are intended to be used in order to inform the design of future wearable input devices. In addition to guiding the design process, the guidelines and recommendations may also be used to inform users of wearable computing devices by guiding towards the selection of a suitable wearable input device. The synthesis of results derived from a series of usability studies provide insights pertaining to the choice and usability of the devices in a wearable context. That is, the guidelines form a checklist that may be utilized as a point of comparison when choosing between the different input devices available for wearable interaction.

  4. Healthy eating design guidelines for school architecture.

    Science.gov (United States)

    Huang, Terry T-K; Sorensen, Dina; Davis, Steven; Frerichs, Leah; Brittin, Jeri; Celentano, Joseph; Callahan, Kelly; Trowbridge, Matthew J

    2013-01-01

    We developed a new tool, Healthy Eating Design Guidelines for School Architecture, to provide practitioners in architecture and public health with a practical set of spatially organized and theory-based strategies for making school environments more conducive to learning about and practicing healthy eating by optimizing physical resources and learning spaces. The design guidelines, developed through multidisciplinary collaboration, cover 10 domains of the school food environment (eg, cafeteria, kitchen, garden) and 5 core healthy eating design principles. A school redesign project in Dillwyn, Virginia, used the tool to improve the schools' ability to adopt a healthy nutrition curriculum and promote healthy eating. The new tool, now in a pilot version, is expected to evolve as its components are tested and evaluated through public health and design research.

  5. Primary battery design and safety guidelines handbook

    Science.gov (United States)

    Bragg, Bobby J.; Casey, John E.; Trout, J. Barry

    1994-12-01

    This handbook provides engineers and safety personnel with guidelines for the safe design or selection and use of primary batteries in spaceflight programs. Types of primary batteries described are silver oxide zinc alkaline, carbon-zinc, zinc-air alkaline, manganese dioxide-zionc alkaline, mercuric oxide-zinc alkaline, and lithium anode cells. Along with typical applications, the discussions of the individual battery types include electrochemistry, construction, capacities and configurations, and appropriate safety measures. A chapter on general battery safety covers hazard sources and controls applicable to all battery types. Guidelines are given for qualification and acceptance testing that should precede space applications. Permissible failure levels for NASA applications are discussed.

  6. Advanced control room design review guidelines: Integration of the NUREG-0700 guidelines and development of new human-system interface guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1997-07-01

    This report documents the work conducted in four tasks of the Nuclear Regulatory Commission (NRC) project entitled Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation. The purpose of the first task was to integrate the applicable sections of NUREG-0700 into the advanced control room design review (ACRDR) guidelines to ensure that all applicable guidelines are together in one document and conveniently accessible to users. The primary objective of the second task was to formulate a strategy for the development of new ACRDR guidelines that have not otherwise been identified. The main focus of the third task was to modify the individual ACRDR guidelines generated to date to ensure that they are suitable for the intended nuclear power plant (NPP) control station system application. The goal of the fourth task was to develop human factors guidelines for two human-system interface categories that are missing from the current ACRDR guidelines document. During the first task those areas in NUREG-0700 that are not addressed by the ACRDR guidelines document were identified, the areas were subsequently reviewed against six recent industry human factors engineering review guidelines, and the NUREG-0700 guidelines were updated as necessary. In the second task 13 general categories of human-system interface guidelines that are either missing from or not adequately addressed by the ACRDR document were discovered. An approach was derived for the development of new ACRDR guidelines, a preliminary assessment of the available sources that may be useful in the creation of new guidelines and their applicability to the identified human-system interface categories was performed, and an estimate was made of the amount of time and level of effort required to complete the development of needed new ACRDR guidelines. During the third task those NPP control station systems to which the NUREG-0700 and ACRDR guidelines apply were identified, matrices of such

  7. Preliminary Guideline for the High Temperature Structure Integrity Assessment Procedure Part II. High Temperature Structural Integrity Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Han; Kim, J. B.; Lee, H. Y.; Park, C. G.; Joo, Y. S.; Koo, G. H.; Kim, S. H

    2007-02-15

    A high temperature structural integrity assessment belongs to the Part II of a whole preliminary guideline for the high temperature structure. The main contents of this guideline are the evaluation procedures of the creep-fatigue crack initiation and growth in high temperature condition, the high temperature LBB evaluation procedure, and the inelastic evaluations of the welded joints in SFR structures. The methodologies for the proper inelastic analysis of an SFR structures in high temperatures are explained and the guidelines of inelastic analysis options using ANSYS and ABAQUS are suggested. In addition, user guidelines for the developed NONSTA code are included. This guidelines need to be continuously revised to improve the applicability to the design and analysis of the SFR structures.

  8. ERIS: preliminary design phase overview

    Science.gov (United States)

    Kuntschner, Harald; Jochum, Lieselotte; Amico, Paola; Dekker, Johannes K.; Kerber, Florian; Marchetti, Enrico; Accardo, Matteo; Brast, Roland; Brinkmann, Martin; Conzelmann, Ralf D.; Delabre, Bernard A.; Duchateau, Michel; Fedrigo, Enrico; Finger, Gert; Frank, Christoph; Rodriguez, Fernando G.; Klein, Barbara; Knudstrup, Jens; Le Louarn, Miska; Lundin, Lars; Modigliani, Andrea; Müller, Michael; Neeser, Mark; Tordo, Sebastien; Valenti, Elena; Eisenhauer, Frank; Sturm, Eckhard; Feuchtgruber, Helmut; George, Elisabeth M.; Hartl, Michael; Hofmann, Reiner; Huber, Heinrich; Plattner, Markus P.; Schubert, Josef; Tarantik, Karl; Wiezorrek, Erich; Meyer, Michael R.; Quanz, Sascha P.; Glauser, Adrian M.; Weisz, Harald; Esposito, Simone; Xompero, Marco; Agapito, Guido; Antichi, Jacopo; Biliotti, Valdemaro; Bonaglia, Marco; Briguglio, Runa; Carbonaro, Luca; Cresci, Giovanni; Fini, Luca; Pinna, Enrico; Puglisi, Alfio T.; Quirós-Pacheco, Fernando; Riccardi, Armando; Di Rico, Gianluca; Arcidiacono, Carmelo; Dolci, Mauro

    2014-07-01

    The Enhanced Resolution Imager and Spectrograph (ERIS) is the next-generation adaptive optics near-IR imager and spectrograph for the Cassegrain focus of the Very Large Telescope (VLT) Unit Telescope 4, which will soon make full use of the Adaptive Optics Facility (AOF). It is a high-Strehl AO-assisted instrument that will use the Deformable Secondary Mirror (DSM) and the new Laser Guide Star Facility (4LGSF). The project has been approved for construction and has entered its preliminary design phase. ERIS will be constructed in a collaboration including the Max- Planck Institut für Extraterrestrische Physik, the Eidgenössische Technische Hochschule Zürich and the Osservatorio Astrofisico di Arcetri and will offer 1 - 5 μm imaging and 1 - 2.5 μm integral field spectroscopic capabilities with a high Strehl performance. Wavefront sensing can be carried out with an optical high-order NGS Pyramid wavefront sensor, or with a single laser in either an optical low-order NGS mode, or with a near-IR low-order mode sensor. Due to its highly sensitive visible wavefront sensor, and separate near-IR low-order mode, ERIS provides a large sky coverage with its 1' patrol field radius that can even include AO stars embedded in dust-enshrouded environments. As such it will replace, with a much improved single conjugated AO correction, the most scientifically important imaging modes offered by NACO (diffraction limited imaging in the J to M bands, Sparse Aperture Masking and Apodizing Phase Plate (APP) coronagraphy) and the integral field spectroscopy modes of SINFONI, whose instrumental module, SPIFFI, will be upgraded and re-used in ERIS. As part of the SPIFFI upgrade a new higher resolution grating and a science detector replacement are envisaged, as well as PLC driven motors. To accommodate ERIS at the Cassegrain focus, an extension of the telescope back focal length is required, with modifications of the guider arm assembly. In this paper we report on the status of the

  9. Ergonomics guidelines for designing electronic mail addresses.

    Science.gov (United States)

    Rau, P L; Salvendy, G

    2001-03-15

    The aim was to design a human-centred electronic mail (e-mail) address system based on networking technology and cognitive ergonomics. Based on the background literature and the results of users' survey, a conceptual model is developed for designing e-mail addresses. This model consists of e-mail address components of formats, domain length, meaningfulness, orientation and information type pertaining to recall, information association and categorization. Five hypotheses were proposed to test the conceptual model, and four experiments were conducted with 85 participants to test the hypotheses. The dependent variables were performance time, error rate and degree of satisfaction, and the independent variables were components of the e-mail addresses. The main results indicate that for a recall task, significantly lower total performance time (26.2%) and error rate (75%) were found for the hybrid formats (digits and letters) than for the letter format, and up to four characters was the best single domain length. For an information association task, embedding both geographical and organizational information significantly decreased the response time (10.9%) in comparison with only embedding organizational information. For a categorization task, embedding both geographical information and organizational information significantly decreased response time (40.7%) in comparison with only embedding organizational information. This research demonstrates the importance of human-centred design and provides guidelines in effectively designing e-mail addresses.

  10. Preliminary design package for Sunair SEC-601 solar collector

    Science.gov (United States)

    1978-01-01

    The preliminary design of the Owens-Illinois model Sunair SEC-601 tubular air solar collector is presented. Information in this package includes the subsystem design and development approaches, hazard analysis, and detailed drawings available as the preliminary design review.

  11. Preliminary aerothermodynamic design method for hypersonic vehicles

    Science.gov (United States)

    Harloff, G. J.; Petrie, S. L.

    1987-01-01

    Preliminary design methods are presented for vehicle aerothermodynamics. Predictions are made for Shuttle orbiter, a Mach 6 transport vehicle and a high-speed missile configuration. Rapid and accurate methods are discussed for obtaining aerodynamic coefficients and heat transfer rates for laminar and turbulent flows for vehicles at high angles of attack and hypersonic Mach numbers.

  12. Building Design Guidelines for Solar Energy Technologies

    Science.gov (United States)

    Givoni, B.

    1989-01-01

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of "solar architecture" and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings.

  13. A Toolbox for Rotorcraft Preliminary Design

    OpenAIRE

    Lier, Max; Krenik, Alex; Kunze, Philipp; Kohlgrüber, Dieter; Schwinn, Dominik; Lützenberger, Marius

    2015-01-01

    The German Aerospace Center (DLR) developed a toolbox, which is able to reflect the conceptual and preliminary design process of rotorcraft configuration. Such a toolbox is a valuable aid for the design engineer and can be used for the assessment of new technologies with regard to the overall configuration. This toolbox is currently extended to model novel rotorcraft configurations. Automated optimization procedures will be added in the future as well. This paper describes the too...

  14. Researching interaction guidelines - Mapping playful quality to design interactive products

    NARCIS (Netherlands)

    Chen, Y.C.; Liu, W.

    2012-01-01

    The interactions in IT supported activities in a Generation Y work context were studied and discussed, which general design guidelines have een revealed. However, further research about practical design guidelines hasn’t been performed. This study aims to serve as supplement of this part based on p

  15. Design Guidelines for Digital Learning Material for Food Chemistry Education.

    Science.gov (United States)

    Diederen, Julia; Gruppen, Harry; Voragen, Alphons G. J.; Hartog, Rob; Mulder, Martin; Biemans, Harm

    This paper describes the first stage of a 4-year research project on the design, development and use of Web-based digital learning material for food chemistry education. The paper discusses design guidelines, based on principles that were selected from theories on learning and instruction, and illustrates in detail how these guidelines were used…

  16. Energy Design Guidelines for High Performance Schools: Tropical Island Climates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-11-01

    Design guidelines outline high performance principles for the new or retrofit design of K-12 schools in tropical island climates. By incorporating energy improvements into construction or renovation plans, schools can reduce energy consumption and costs.

  17. Building design guidelines for solar energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Givoni, B.

    1989-01-01

    There are two main objectives to this publication. The first is to find out the communalities in the experience gained in previous studies and in actual applications of solar technologies in buildings, residential as well as nonresidential. The second objective is to review innovative concepts and products which may have an impact on future developments and applications of solar technologies in buildings. The available information and common lessons were collated and presented in a form which, hopefully, is useful for architects and solar engineers, as well as for teachers of solar architecture'' and students in Architectural Schools. The publication is based mainly on the collection and analysis of relevant information. The information included previous studies in which the performance of solar buildings was evaluated, as well as the personal experience of the Author and the research consultants. The state of the art, as indicated by these studies and personal experience, was summarized and has served as basis for the development of the Design Guidelines. In addition to the summary of the state of the art, as was already applied in solar buildings, an account was given of innovative concepts and products. Such innovations have occurred in the areas of thermal storage by Phase Change Materials (PCM) and in glazing with specialized or changeable properties. Interesting concepts were also developed for light transfer, which may enable to transfer sunlight to the core areas of large multi story nonresidential buildings. These innovations may have a significant impact on future developments of solar technologies and their applications in buildings. 15 refs., 19 figs., 3 tabs.

  18. Preliminary designs: passive solar manufactured housing. Technical status report

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-12

    The criteria established to guide the development of the preliminary designs are listed. Three preliminary designs incorporating direct gain and/or sunspace are presented. Costs, drawings, and supporting calculations are included. (MHR)

  19. 78 FR 48159 - Preliminary 2012 Effluent Guidelines Program Plan and 2011 Annual Effluent Guidelines Review Report

    Science.gov (United States)

    2013-08-07

    ... captured and included as part of the comment that is placed in the public docket and made available on the... delist from the effluent guidelines plan the rulemaking for the Coalbed Methane Extraction subcategory... Regenerated Cellulose Manufacturers (previously categorized as Plastics Molding and Forming (40 CFR Part...

  20. Preliminary design of a coffee harvester

    Directory of Open Access Journals (Sweden)

    Raphael Magalhães Gomes Moreira

    2016-10-01

    Full Text Available Design of an agricultural machine is a highly complex process due to interactions between the operator, machine, and environment. Mountain coffee plantations constitute an economic sector that requires huge investments for the development of agricultural machinery to improve the harvesting and post-harvesting processes and to overcome the scarcity of work forces in the fields. The aim of this study was to develop a preliminary design for a virtual prototype of a coffee fruit harvester. In this study, a project methodology was applied and adapted for the development of the following steps: project planning, informational design, conceptual design, and preliminary design. The construction of a morphological matrix made it possible to obtain a list of different mechanisms with specific functions. The union between these mechanisms resulted in variants, which were weighed to attribute scores for each selected criterion. From each designated proposal, two variants with the best scores were selected and this permitted the preparation of the preliminary design of both variants. The archetype was divided in two parts, namely the hydraulically articulated arms and the harvesting system that consisted of the vibration mechanism and the detachment mechanism. The proposed innovation involves the use of parallel rods, which were fixed in a plane and rectangular metal sheet. In this step, dimensions including a maximum length of 4.7 m, a minimum length of 3.3 m, and a total height of 2.15 m were identified based on the functioning of the harvester in relation to the coupling point of the tractor.

  1. Use of charging control guidelines for geosynchronous satellite design studies

    Science.gov (United States)

    Steves, N. J.

    1980-01-01

    Several of the principle guidelines from the Spacecraft Charging Design Guidelines Handbook are presented with illustrative examples. Use of the geomagnetic substorm specification to qualify satellite designs, the evaluation of satellite designs by using analytical modelling techniques, the use of selected materials and coatings to minimize charging, the tying of all conducting elements to a common ground, and the use of electrical filtering to protect circuits from discharge induced upsets are discussed. Discharge criteria and SCATHA data are excluded.

  2. Preliminary report on operational guidelines developed for use in emergency preparedness and response to a radiological dispersal device incident.

    Energy Technology Data Exchange (ETDEWEB)

    Yu, C.; Cheng, J.-J.; Kamboj, S.; Domotor, S.; Wallo, A.; Environmental Science Division; DOE

    2006-12-15

    This report presents preliminary operational guidelines and supporting work products developed through the interagency Operational Guidelines Task Group (OGT). The report consolidates preliminary operational guidelines, all ancillary work products, and a companion software tool that facilitates their implementation into one reference source document. The report is intended for interim use and comment and provides the foundation for fostering future reviews of the operational guidelines and their implementation within emergency preparedness and response initiatives in the event of a radiological dispersal device (RDD) incident. The report principally focuses on the technical derivation and presentation of the operational guidelines. End-user guidance providing more details on how to apply these operational guidelines within planning and response settings is being considered and developed elsewhere. The preliminary operational guidelines are categorized into seven groups on the basis of their intended application within early, intermediate, and long-term recovery phases of emergency response. We anticipate that these operational guidelines will be updated and refined by interested government agencies in response to comments and lessons learned from their review, consideration, and trial application. This review, comment, and trial application process will facilitate the selection of a final set of operational guidelines that may be more or less inclusive of the preliminary operational guidelines presented in this report. These and updated versions of the operational guidelines will be made available through the OGT public Web site (http://ogcms.energy.gov) as they become finalized for public distribution and comment.

  3. Integrated Human Factors Design Guidelines for Sound Interface

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Lee, Yong Hee; Oh, In Seok; Lee, Hyun Chul [KAERI, Daejeon (Korea, Republic of); Cha, Woo Chang [Kumoh National Univ. of Technology, Gumi (Korea, Republic of)

    2004-05-15

    Digital MMI, such as CRT, LCD etc., has been used increasingly in the design of main control room of the Korean standard nuclear power plants following the YGN units 3 and 4. The utilization of digital MMI may introduce various kind of sound interface into the control room design. In this project, for five top-level guideline items, including Sound Formats, Alarms, Sound Controls, Communications, and Environments, a total of 147 detail guidelines were developed and a database system for these guidelines was developed. The integrated human factors design guidelines for sound interface and the database system developed in this project will be useful for the design of sound interface of digital MMI in Korean NPPs.

  4. Bioinformatic tools and guideline for PCR primer design | Abd ...

    African Journals Online (AJOL)

    Bioinformatic tools and guideline for PCR primer design. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... Bioinformatics has become an essential tool not only for basic research but also ...

  5. Preliminary ALARA design concept for SMART

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyo Youn; Kim, Seung Nam; Kim, Ha Yong; Zee, Sung Quun; Chang, Moon Hee

    1999-03-01

    SMART(System-integrated Modular Advanced ReacTor) is a space saving integral type nuclear rector with the thermal power of 330 MW. This report provides general design guide and authority in NSSS designs for SMART needed to maintain the occupational doses and doses to members of public ALARA to meet the regulatory requirements. Paragraph 20.1 of 10 CFR 20, ''Standards for Protection Against Radiation'', states that licensee should make every reasonable effort to maintain exposures to radiation as far below the limits specified in Part 20 as is reasonably achievable. The ALARA (as low as is reasonably achievable) principle is incorporated into Korean radiation protection law as paragraph one Article 97 of the Atomic Energy Act. (Jan. 1995). This ALARA Design Concept for SMART provides 1) description of the organization and responsibilities needed for upper level management support and authority in order for the implementation of ALARA, 2) guidance and procedures for design, review, and evaluation needed for SMART ALARA program implementation, 3) general design guidelines for SMART NSSS and BOP designers to implement ALARA principles in design stage, and 4) training and instruction requirement of SMART NSSS and BOP designers for the familiarization of ALARA principles to be implemented in NSSS designs. (Author). 4 refs., 1 tabs.

  6. PRELIMINARY SELECTION OF MGR DESIGN BASIS EVENTS

    Energy Technology Data Exchange (ETDEWEB)

    J.A. Kappes

    1999-09-16

    The purpose of this analysis is to identify the preliminary design basis events (DBEs) for consideration in the design of the Monitored Geologic Repository (MGR). For external events and natural phenomena (e.g., earthquake), the objective is to identify those initiating events that the MGR will be designed to withstand. Design criteria will ensure that radiological release scenarios resulting from these initiating events are beyond design basis (i.e., have a scenario frequency less than once per million years). For internal (i.e., human-induced and random equipment failures) events, the objective is to identify credible event sequences that result in bounding radiological releases. These sequences will be used to establish the design basis criteria for MGR structures, systems, and components (SSCs) design basis criteria in order to prevent or mitigate radiological releases. The safety strategy presented in this analysis for preventing or mitigating DBEs is based on the preclosure safety strategy outlined in ''Strategy to Mitigate Preclosure Offsite Exposure'' (CRWMS M&O 1998f). DBE analysis is necessary to provide feedback and requirements to the design process, and also to demonstrate compliance with proposed 10 CFR 63 (Dyer 1999b) requirements. DBE analysis is also required to identify and classify the SSCs that are important to safety (ITS).

  7. Preliminary safety design analysis of KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Soo Dong; Kwon, Y. M.; Kim, K. D. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-03-01

    The national long-term R and D program updated in 1997 requires Korea Atomic Energy Research Institute(KAERI) to complete by the year 2006 the basic design of Korea Advanced Liquid Metal Reactor (KALIMER), along with supporting R and D work, with the capability of resolving the issue of spent fuel storage as well as with significantly enhanced safety. KALIMER is a 150 MWe pool-type sodium cooled prototype reactor that uses metallic fuel. The conceptual design is currently under way to establish a self consistent design meeting a set of the major safety design requirements for accident prevention. Some of current emphasis include those for inherent and passive means of negative reactivity insertion and decay heat removal, high shutdown reliability, prevention of and protection from sodium chemical reaction, and high seismic margin, among others. All of these requirements affect the reactor design significantly and involve supporting R and D programs of substance. This document first introduces a set of safety design requirements and accident evaluation criteria established for the conceptual design of KALIMER and then summarizes some of the preliminary results of engineering and design analyses performed for the safety of KALIMER. 19 refs., 19 figs., 6 tabs. (Author)

  8. Preliminary design for a maglev development facility

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, H.T.; He, J.L.; Chang, S.L.; Bouillard, J.X.; Chen, S.S.; Cai, Y.; Hoppie, L.O.; Lottes, S.A.; Rote, D.M. [Argonne National Lab., IL (United States); Zhang, Z.Y. [Polytechnic Univ., Brooklyn, NY (United States); Myers, G.; Cvercko, A. [Sterling Engineering, Westchester, IL (United States); Williams, J.R. [Alfred Benesch and Co., Chicago, IL (United States)

    1992-04-01

    A preliminary design was made of a national user facility for evaluating magnetic-levitation (maglev) technologies in sizes intermediate between laboratory experiments and full-scale systems. A technical advisory committee was established and a conference was held to obtain advice on the potential requirements of operational systems and how the facility might best be configured to test these requirements. The effort included studies of multiple concepts for levitating, guiding, and propelling maglev vehicles, as well as the controls, communications, and data-acquisition and -reduction equipment that would be required in operating the facility. Preliminary designs for versatile, dual 2-MVA power supplies capable of powering attractive or repulsive systems were developed. Facility site requirements were identified. Test vehicles would be about 7.4 m (25 ft) long, would weigh form 3 to 7 metric tons, and would operate at speeds up to 67 m/s (150 mph) on a 3.3-km (2.05-mi) elevated guideway. The facility would utilize modular vehicles and guideways, permitting the substitution of levitation, propulsion, and guideway components of different designs and materials for evaluation. The vehicle would provide a test cell in which individual suspension or propulsion components or subsystems could be tested under realistic conditions. The system would allow economical evaluation of integrated systems under varying weather conditions and in realistic geometries.

  9. Preliminary design for a maglev development facility

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, H.T.; He, J.L.; Chang, S.L.; Bouillard, J.X.; Chen, S.S.; Cai, Y.; Hoppie, L.O.; Lottes, S.A.; Rote, D.M. (Argonne National Lab., IL (United States)); Zhang, Z.Y. (Polytechnic Univ., Brooklyn, NY (United States)); Myers, G.; Cvercko, A. (Sterling Engineering, Westchester, IL (United States)); Williams, J.R. (Alfred Benesch and Co., Chicago, IL (United States))

    1992-04-01

    A preliminary design was made of a national user facility for evaluating magnetic-levitation (maglev) technologies in sizes intermediate between laboratory experiments and full-scale systems. A technical advisory committee was established and a conference was held to obtain advice on the potential requirements of operational systems and how the facility might best be configured to test these requirements. The effort included studies of multiple concepts for levitating, guiding, and propelling maglev vehicles, as well as the controls, communications, and data-acquisition and -reduction equipment that would be required in operating the facility. Preliminary designs for versatile, dual 2-MVA power supplies capable of powering attractive or repulsive systems were developed. Facility site requirements were identified. Test vehicles would be about 7.4 m (25 ft) long, would weigh form 3 to 7 metric tons, and would operate at speeds up to 67 m/s (150 mph) on a 3.3-km (2.05-mi) elevated guideway. The facility would utilize modular vehicles and guideways, permitting the substitution of levitation, propulsion, and guideway components of different designs and materials for evaluation. The vehicle would provide a test cell in which individual suspension or propulsion components or subsystems could be tested under realistic conditions. The system would allow economical evaluation of integrated systems under varying weather conditions and in realistic geometries.

  10. Preliminary design for a MAGLEV development facility

    Science.gov (United States)

    Coffey, H. T.; He, J. L.; Chang, S. L.; Bouillard, J. X.; Chen, S. S.; Cai, Y.; Hoppie, L. O.; Lottes, S. A.; Rote, D. M.; Zhang, Z. Y.

    1992-04-01

    A preliminary design was made of a national user facility for evaluating magnetic-levitation (maglev) technologies in sizes intermediate between laboratory experiments and full-scale systems. A technical advisory committee was established and a conference was held to obtain advice on the potential requirements of operational systems and how the facility might best be configured to test these requirements. The effort included studies of multiple concepts for levitating, guiding, and propelling maglev vehicles, as well as the controls, communications, and data-acquisition and -reduction equipment that would be required in operating the facility. Preliminary designs for versatile, dual 2-MVA power supplies capable of powering attractive or repulsive systems were developed. Facility site requirements were identified. Test vehicles would be about 7.4 m (25 ft) long, would weigh from 3 to 7 metric tons, and would operate at speeds up to 67 m/s (150 mph) on a 3.3-km (2.05-mi) elevated guideway. The facility would utilize modular vehicles and guideways, permitting the substitution of levitation, propulsion, and guideway components of different designs and materials for evaluation. The vehicle would provide a test cell in which individual suspension or propulsion components or subsystems could be tested under realistic conditions. The system would allow economical evaluation of integrated systems under varying weather conditions and in realistic geometries.

  11. Guidelines for engineering design for process safety

    National Research Council Canada - National Science Library

    2012-01-01

    .... Key areas to be enhanced in the new edition include inherently safer design, specifically concepts for design of inherently safer unit operations and Safety Instrumented Systems and Layer of Protection Analysis...

  12. ISSA/TSS power preliminary design

    Science.gov (United States)

    Main, John A.

    1996-01-01

    A projected power shortfall during the initial utilization flights of the International Space Station Alpha (ISSA) has prompted an inquiry into the use of the Tethered Satellite System (TSS) to provide station power. The preliminary design of the combined ISSA/TSS system is currently underway in the Preliminary Design Office at the Marshall Space Flight Center. This document focuses on the justification for using a tether system on space station, the physical principles behind such a system, and how it might be operated to best utilize its capabilities. The basic components of a simple DC generator are a magnet of some type and a conductive wire. Moving the wire through the magnetic field causes forces to be applied to the electric charges in the conductor, and thus current is induced to flow. This simple concept is the idea behind generating power with space-borne tether systems. The function of the magnet is performed by the earth's magnetic field, and orbiting a conductive tether about the earth effectively moves the tether through the field.

  13. CTF3 Design Report Preliminary Phase

    CERN Document Server

    Allard, D; Bernard, M; Bertuzzi, J P; Bienvenu, G; Bonzano, R; Bossart, Rudolf; Braun, H; Bravin, Enrico; Borburgh, J; Buttkus, J; Chazarenc, E; Chaput, R; Chohan, V; Cloye, J J; Corsini, R; Coudert, G; Damiani, M; Deghaye, S; Delahaye, J P; Di Maio, F; Dobers, T; Dubief, P; Dupuy, B; Durieu, L; Ferrari, A; Garvey, Terence; Geschonke, Günther; Hansen, J; Hellgren, H; Hourican, M; Lamidon, M; Le Duff, J; Lefèvre, T; Lewis, J H; Lindroos, J; Mahner, E; McMonagle, G; Monteiro, J; Mourier, J; Mouton, B; Odier, P; Otto, T; Pearce, P; Pittin, R; Poehler, M; Potier, J P; Raich, U; Rettig, M; Rinolfi, Louis; Risselada, Thys; Riva, R; Rossat, G; Royer, P; Sermeus, L; Setas, K; Simonet, G; Sladen, Jonathan P H; Søby, L; Tanner, L; Tecker, F A; Thomi, J C; Wilson, Ian H; Yvon, G

    2001-01-01

    The design of CLIC is based on a two-beam scheme, where the short pulses of high power 30 GHz RF are extracted from a drive beam running parallel to the main beam. The 3rd generation CLIC Test Facility (CTF3) will demonstrate the generation of the drive beam with the appropriate time structure, the extraction of 30 GHz RF power from this beam, as well as acceleration of a probe beam with 30 GHz RF cavities. The project makes maximum use of existing equipment and infrastructure of the LPI complex, which became available after the closure of LEP. In the first stage of the project, the "Preliminary Phase", the existing LIL linac and the EPA ring, both modified to suit the new requirements, are used to investigate the technique of frequency multiplication by means of interleaving bunches from subsequent trains. This report describes the design of this phase.

  14. Seismic Design Guidelines For Port Structures

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Bernal, Alberto; Blazquez, Rafael

    In order to mitigate hazards and losses due to earthquakes, seismic design methodologies have been developed and implemented in design practice in many regions since the early twentieth century, often in the form of codes and standards. Most of these methodologies are based on a force-balance app...

  15. Seismic Design Guidelines For Port Structures

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Bernal, Alberto; Blazquez, Rafael

    -balance approach, in which structures are designed to resist a prescribed level of seismic force specified as a fraction of gravity. These methodologies have contributed to the acceptable seismic performance of port structures, particularly when the earthquake motions are more or less within the prescribed design...

  16. Human-system interface design review guideline -- Process and guidelines: Final report. Revision 1, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-06-01

    NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant`s HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 1 consists of two major parts. Part 1 describes those aspects of the review process of the HSI design that are important to identifying and resolving human engineering discrepancies. Part 2 contains detailed guidelines for a human factors engineering review which identify criteria for assessing the implementation of an applicant`s or licensee`s HSI design.

  17. Guidelines for engineering design for process safety

    National Research Council Canada - National Science Library

    2012-01-01

    "This updated version of one of the most popular and widely used CCPS books provides plant design engineers, facility operators, and safety professionals with key information on selected topics of interest...

  18. NSLS-II Preliminary Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Dierker, S.

    2007-11-01

    Following the CD0 approval of the National Synchrotron Light Source II (NSLS-II) during August 2005, Brookhaven National Laboratory prepared a conceptual design for a worldclass user facility for scientific research using synchrotron radiation. DOE SC review of the preliminary baseline in December 2006 led to the subsequent CD1 approval (approval of alternative selection and cost range). This report is the documentation of the preliminary design work for the NSLS-II facility. The preliminary design of the Accelerator Systems (Part 1) was developed mostly based of the Conceptual Design Report, except for the Booster design, which was changed from in-storage-ring tunnel configuration to in external- tunnel configuration. The design of beamlines (Part 2) is based on designs developed by engineering firms in accordance with the specification provided by the Project. The conventional facility design (Part 3) is the Title 1 preliminary design by the AE firm that met the NSLS-II requirements. Last and very important, Part 4 documents the ES&H design and considerations related to this preliminary design. The NSLS-II performance goals are motivated by the recognition that major advances in many important technology problems will require scientific breakthroughs in developing new materials with advanced properties. Achieving this will require the development of new tools that will enable the characterization of the atomic and electronic structure, chemical composition, and magnetic properties of materials, at nanoscale resolution. These tools must be nondestructive, to image and characterize buried structures and interfaces, and they must operate in a wide range of temperatures and harsh environments. The NSLS-II facility will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility

  19. An Exposition of Current Mobile Learning Design Guidelines and Frameworks

    Science.gov (United States)

    Teall, Ed; Wang, Minjuan; Callaghan, Vic; Ng, Jason W. P.

    2014-01-01

    As mobile devices with wireless access become more readily available, learning delivered via mobile devices of all types must be designed to ensure successful learning. This paper first examines three questions related to the design of mobile learning: 1) what mobile learning (m-learning) guidelines can be identified in the current literature, 2)…

  20. An Exposition of Current Mobile Learning Design Guidelines and Frameworks

    Science.gov (United States)

    Teall, Ed; Wang, Minjuan; Callaghan, Vic; Ng, Jason W. P.

    2014-01-01

    As mobile devices with wireless access become more readily available, learning delivered via mobile devices of all types must be designed to ensure successful learning. This paper first examines three questions related to the design of mobile learning: 1) what mobile learning (m-learning) guidelines can be identified in the current literature, 2)…

  1. NSLS-II Preliminary Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Dierker, S.

    2007-11-01

    Following the CD0 approval of the National Synchrotron Light Source II (NSLS-II) during August 2005, Brookhaven National Laboratory prepared a conceptual design for a worldclass user facility for scientific research using synchrotron radiation. DOE SC review of the preliminary baseline in December 2006 led to the subsequent CD1 approval (approval of alternative selection and cost range). This report is the documentation of the preliminary design work for the NSLS-II facility. The preliminary design of the Accelerator Systems (Part 1) was developed mostly based of the Conceptual Design Report, except for the Booster design, which was changed from in-storage-ring tunnel configuration to in external- tunnel configuration. The design of beamlines (Part 2) is based on designs developed by engineering firms in accordance with the specification provided by the Project. The conventional facility design (Part 3) is the Title 1 preliminary design by the AE firm that met the NSLS-II requirements. Last and very important, Part 4 documents the ES&H design and considerations related to this preliminary design. The NSLS-II performance goals are motivated by the recognition that major advances in many important technology problems will require scientific breakthroughs in developing new materials with advanced properties. Achieving this will require the development of new tools that will enable the characterization of the atomic and electronic structure, chemical composition, and magnetic properties of materials, at nanoscale resolution. These tools must be nondestructive, to image and characterize buried structures and interfaces, and they must operate in a wide range of temperatures and harsh environments. The NSLS-II facility will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility

  2. Design Guidelines For a Thermoacoustic Refrigerator

    CERN Document Server

    Dhuley, Ram C

    2016-01-01

    Development of refrigerators based on Thermoacoustic technology is a novel solution to the present day need of cooling without causing environmental hazards. With added advantages of absence of moving parts and circulating refrigerants, these devices can attain very low temperatures maintaining a compact size. The present theoretical work is based on theory of linear thermoacoustics[1]. Under the short stack and invicid assumptions, an algorithm for design of a standing wave thermoacoustic refrigerator, with main focus on the stack, is described. A stack is designed for a given cooling requirement of the refrigerator and certain chosen operation parameters.

  3. Preliminary conceptual design about the CEPC calorimeters

    Science.gov (United States)

    Yang, Haijun

    2016-11-01

    The Circular Electron Positron Collider (CEPC) as a Higgs factory was proposed in September 2013. The preliminary conceptual design report was completed in 2015.1 The CEPC detector design was using International Linear Collider Detector — ILD2 as an initial baseline. The CEPC calorimeters, including the high granularity electromagnetic calorimeter (ECAL) and the hadron calorimeter (HCAL), are designed for precise energy measurements of electrons, photons, taus and hadronic jets. The basic resolution requirements for the ECAL and HCAL are about 16%E (GeV) and 50%E (GeV), respectively. To fully exploit the physics potential of the Higgs, W, Z and related Standard Model processes, the jet energy resolution is required to reach 3%-4%, or 30%/E (GeV) at energies below about 100 GeV. To achieve the required performance, a Particle Flow Algorithm (PFA) — oriented calorimetry system is being considered as the baseline design. The CEPC ECAL detector options include silicon-tungsten or scintillator-tungsten structures with analog readout, while the HCAL detector options have scintillator or gaseous detector as the active sensor and iron as the absorber. Some latest R&D studies about ECAL and HCAL within the CEPC working group is also presented.

  4. Preliminary Opto-Mechanical Design for the X2000 Transceiver

    Science.gov (United States)

    Hemmati, H.; Page, N. A.

    2000-01-01

    Preliminary optical design and mechanical conceptual design for a 30 cm aperture transceiver are described. A common aperture is used for both transmit and receive. Special attention was given to off-axis and scattered light rejection and isolation of the receive channel from the transmit channel. Requirements, details of the design and preliminary performance analysis of the transceiver are provided.

  5. Preliminary design package for Sunair SEC-601 solar collector

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    This report presents the preliminary design of the Owens-Illinois mode Sunair SEC-601 tubular air solar collector. Information in this package includes the Subsystem Design and Development Approaches, hazard analysis, and detailed drawings available as the Preliminary Design Review.

  6. Landfill gas management facilities design guidelines

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-03-15

    In British Columbia, municipal solid waste landfills generate over 1000 tonnes of methane per year; landfill gas management facilities are required to improve the environmental performance of solid waste landfills. The aim of this document, developed by the British Columbia Ministry of the Environment, is to provide guidance for the design, installation, and operation of landfill gas management facilities to address odor and pollutant emissions issues and also address health and safety issues. A review of technical experience and best practices in landfill gas management facilities was carried out, as was as a review of existing regulations related to landfill gas management all over the world. This paper provides useful information to landfill owners, operators, and other professionals for the design of landfill gas management facilities which meet the requirements of landfill gas management regulations.

  7. Guidelines for CubeSat's Thermal Design

    Science.gov (United States)

    Rodriguez-Ruiz, Juan; Patel, Deepak

    2015-01-01

    Thermal and Fluids Analysis Workshop 2015, Silver Spring, MD. NCTS 19104-15. What does it take to thermally designlow cost, low mass cubesats? What are the differences in the approach when you compare with large scale missions?What additional risk is acceptable? What is the approach to hardware? How is the testing campaign run? These aresome of the questions that will be addressed in this course, which is designed to equip the attendees to support thedevelopment of cubesats at their organization.

  8. Guideline Principles for Designing Astronomy Activities

    Science.gov (United States)

    Strubbe, Linda

    2015-03-01

    We astronomy outreachers are passionate about sharing astronomy widely-but many astronomy outreach activities are designed more by how we hope things will work than in a careful intentional way. We also rarely evaluate how well our activities are achieving our goals. As a result, many educational activities must be significantly less effective than they could be. Fortunately, there is a large body of education research on how people learn. If we are serious about sharing astronomy widely and effectively, we must treat our teaching like research: (1) Have clear goals for our outreach, evaluate how well we are achieving our goals, and revise our strategies in light of what we learn; and (2) Use appropriate teaching techniques supported by education research wherever possible.

  9. Emergency design framework: a satellite preliminary scheme design

    Institute of Scientific and Technical Information of China (English)

    TENG Hongfei; WANG Yishou; ZHANG Bao

    2007-01-01

    The emergency design of mechanical products or equipment(such as a satellite)is significant for disaster relief when the natural disasters occur.Most of us are unaware about the little information that is available in literature about emergency designs.Against the background of the preliminary scheme design of satellite payloads,emergency design was studied in the case of natural disasters.We presented some definitions about emergency design.Then,we proposed the basic ideas of how to realize the emergency design.These ideas were inspired by two aspects:1)the evolutionary algorithms,the agent,the human-computer cooperation,and the collaborative design theory;2)the emergency behaviors in ant colonies.Following the ideas,first we constructed the human-computer cooperation agents(hereinafter called the HC-Agents)that combine the human intelligence with evolutionary algorithms.These HC-Agents had specific features like the division of labor in the ant colony.Second,we developed the multiagents cooperative design system on the basis of a hybrid P2P(peer-to-peer)model.Therefore,the emergency design system has shown some capabilities,such as anti-interference,adaptation,and rapid response.

  10. Treatment Guidelines for Preoperative Radiation Therapy for Retroperitoneal Sarcoma: Preliminary Consensus of an International Expert Panel

    Energy Technology Data Exchange (ETDEWEB)

    Baldini, Elizabeth H., E-mail: ebaldini@partners.org [Department of Radiation Oncology, Dana-Farber Cancer Institute and Brigham and Women' s Hospital, Boston, Massachusetts (United States); Wang, Dian [Department of Radiation Oncology, Rush University Medical Center, Chicago, Illinois (United States); Haas, Rick L.M. [Department of Radiotherapy, The Netherlands Cancer Institute-Antoni van Leeuwenhoek Hospital, Amsterdam (Netherlands); Catton, Charles N. [Department of Radiation Oncology, Princess Margaret Cancer Centre, Toronto, Ontario (Canada); Indelicato, Daniel J. [Department of Radiation Oncology, University of Florida Medical Center, Jacksonville, Florida (United States); Kirsch, David G. [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Roberge, David [Department of Radiation Oncology, Centre Hospitalier de l' Université de Montreal, Montreal, Quebec (Canada); Salerno, Kilian [Department of Radiation Oncology, Roswell Park Cancer Institute, Buffalo, New York (United States); Deville, Curtiland [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins Sidney Kimmel Cancer Center, Washington, DC (United States); Guadagnolo, B. Ashleigh [Department of Radiation Oncology, MD Anderson Cancer Center, Houston, Texas (United States); O' Sullivan, Brian [Department of Radiation Oncology, Princess Margaret Cancer Centre, Toronto, Ontario (Canada); Petersen, Ivy A. [Department of Radiation Oncology, Mayo Clinic, Rochester, Minnesota (United States); Le Pechoux, Cecile [Department of Radiotherapy, Institut Gustave-Roussy, Villejuif (France); Abrams, Ross A. [Department of Radiation Oncology, Rush University Medical Center, Chicago, Illinois (United States); DeLaney, Thomas F. [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States)

    2015-07-01

    Purpose: Evidence for external beam radiation therapy (RT) as part of treatment for retroperitoneal sarcoma (RPS) is limited. Preoperative RT is the subject of a current randomized trial, but the results will not be available for many years. In the meantime, many practitioners use preoperative RT for RPS, and although this approach is used in practice, there are no radiation treatment guidelines. An international expert panel was convened to develop consensus treatment guidelines for preoperative RT for RPS. Methods and Materials: An expert panel of 15 academic radiation oncologists who specialize in the treatment of sarcoma was assembled. A systematic review of reports related to RT for RPS, RT for extremity sarcoma, and RT-related toxicities for organs at risk was performed. Due to the paucity of high-quality published data on the subject of RT for RPS, consensus recommendations were based largely on expert opinion derived from clinical experience and extrapolation of relevant published reports. It is intended that these clinical practice guidelines be updated as pertinent data become available. Results: Treatment guidelines for preoperative RT for RPS are presented. Conclusions: An international panel of radiation oncologists who specialize in sarcoma reached consensus guidelines for preoperative RT for RPS. Many of the recommendations are based on expert opinion because of the absence of higher level evidence and, thus, are best regarded as preliminary. We emphasize that the role of preoperative RT for RPS has not been proven, and we await data from the European Organization for Research and Treatment of Cancer (EORTC) study of preoperative radiotherapy plus surgery versus surgery alone for patients with RPS. Further data are also anticipated pertaining to normal tissue dose constraints, particularly for bowel tolerance. Nonetheless, as we await these data, the guidelines herein can be used to establish treatment uniformity to aid future assessments of efficacy

  11. Environmental Design Guidelines for Low Crested Coastal Structures

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Hawkins, Stephen J.; Zanuttigh, Barbara

    methodological tools both for the engineering design of structures and for prediction of performance and environmental impacts of such structures. It is anticipated that the guidelines will provide valuable inputs to coastal zone management plans. The target audience for this set of guidelines is consulting...... engineers or engineering officers and officials of local authorities dealing with coastal protection schemes. The guidelines are also of relevance in providing a briefing of current best practice for local and national planning authorities, statutory agencies and other stakeholders in the coastal zone...... selected to represent a variety of environmental conditions (Chapter 11); the application of the proposed methodology to a real prototype case, in order to give a practical example to designers (Chapter 12). The third part contains all the formulae and tools to help engineers (Chapter 13), ecologists...

  12. Development of human factors design review guidelines(II)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

    1998-06-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 11 refs., 2 figs., 2 tabs.

  13. Development of human factors design review guidelines(III)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-02-15

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994.

  14. Suggested Guidelines for Screen Layouts and Design of Online Catalogs.

    Science.gov (United States)

    Matthews, Joseph R.

    1987-01-01

    Presents detailed guidelines based on the literature for screen layout and design of online catalogs, and discusses the potential advantages in terms of number of transactions per hour and user satisfaction. Further research questions are suggested and an extensive bibliography is provided. (CLB)

  15. Introducing guidelines for eco-dynamic development and design

    NARCIS (Netherlands)

    Van Koningsveld, M.; Van Raalte, G.H.

    2011-01-01

    One of the key activities within the Building with Nature innovation programme is the development of a guideline for Eco-dynamic Development and Design. This guidance will be focussed on implementation of the Building with Nature principles throughout all of the stages of hydraulic engineering proje

  16. Agile Contracts: Designing an Agile Team Selection Guideline

    DEFF Research Database (Denmark)

    Pries-Heje, Lene; Pries-Heje, Jan

    2014-01-01

    with “endless” re-negotiation of the requirements; you need a more flexible way to develop IS. A new way of coping with many changes is to use an agile development approach and a fixed budget and resources contract. This paper presents an example case. We analyse the case and design a guideline for how...

  17. Introducing guidelines for eco-dynamic development and design

    NARCIS (Netherlands)

    Van Koningsveld, M.; Van Raalte, G.H.

    2011-01-01

    One of the key activities within the Building with Nature innovation programme is the development of a guideline for Eco-dynamic Development and Design. This guidance will be focussed on implementation of the Building with Nature principles throughout all of the stages of hydraulic engineering

  18. Screen Design Guidelines for Motivation in Interactive Multimedia Instruction: A Survey and Framework for Designers.

    Science.gov (United States)

    Lee, Sung Heum; Boling, Elizabeth

    1999-01-01

    Identifies guidelines from the literature relating to screen design and design of interactive instructional materials. Describes two types of guidelines--those aimed at enhancing motivation and those aimed at preventing loss of motivation--for typography, graphics, color, and animation and audio. Proposes a framework for considering motivation in…

  19. Screen Design Guidelines for Motivation in Interactive Multimedia Instruction: A Survey and Framework for Designers.

    Science.gov (United States)

    Lee, Sung Heum; Boling, Elizabeth

    1999-01-01

    Identifies guidelines from the literature relating to screen design and design of interactive instructional materials. Describes two types of guidelines--those aimed at enhancing motivation and those aimed at preventing loss of motivation--for typography, graphics, color, and animation and audio. Proposes a framework for considering motivation in…

  20. Preliminary design of pseudo satellites: Basic methods and feasibility criteria

    Science.gov (United States)

    Klimenko, N. N.

    2016-12-01

    Analytical models of weight and energy balances, aerodynamic models, and solar irradiance models to perform pseudo-satellite preliminary design are presented. Feasibility criteria are determined in accordance with the aim of preliminary design dependent on mission scenario and type of payload.

  1. Agile Contracts: Designing an Agile Team Selection Guideline

    DEFF Research Database (Denmark)

    Pries-Heje, Lene; Pries-Heje, Jan

    2014-01-01

    with “endless” re-negotiation of the requirements; you need a more flexible way to develop IS. A new way of coping with many changes is to use an agile development approach and a fixed budget and resources contract. This paper presents an example case. We analyse the case and design a guideline for how...... to implement a fixed budget and resources contract in the public sector. The guideline includes elements to cope with challenges in a tender process such as transparency, criteria for supplier selection, and live assessment of resource skills and capabilities, as well as achieving the flexibility for change...

  2. Designing the Mobile Web: Guidelines for User Interactionand Experience

    OpenAIRE

    Ring, Lisa

    2013-01-01

    The area of mobile web is evolving rapidly but there are still no consensus regarding recommendations or best practices within the topic. Therefore this thesis is focused on interaction design within mobile web and compiles many dierent theories into guidelines for mobileweb design. The thesis may also be used as a foundation when deciding whether to developa native mobile application or a mobile adapted web application, or when choosing betweena separate mobile web application and a responsi...

  3. The deuteron accelerator preliminary design for BISOL

    Energy Technology Data Exchange (ETDEWEB)

    Peng, S.X., E-mail: sxpeng@pku.edu.cn; Zhu, F.; Wang, Z.; Gao, Y.; Guo, Z.Y.

    2016-06-01

    BISOL, which was named as Beijing-ISOL before (Cui et al., 2013), is the abbreviation of Beijing Isotope-Separation-On-Line neutron beam facility. It is proposed jointly by Peking University (PKU) and China Institute of Atomic Energy (CIAE) for basic science study and application. It is a double driven facility that can be driven by a reactor or a deuteron accelerator. The deuteron driver accelerator should accelerate the deuteron beam up to 40 MeV with maximum beam current of 10 mA. Proton beams up to 33 MeV and He{sup 2+} beams up to 81.2 MeV can also be accelerated in this accelerator. The accelerator can be operated on either CW (continuous waveform) or pulsed mode, and the ion energy can be adjusted in a wide range. The accelerator will also allow independent operation of the RIB (Radioactive Ion Beams) system. It will be mainly charged by PKU group. Details of the deuteron accelerator preliminary design for BISOL will be given in this paper.

  4. STACEE-32: Design, performance, and preliminary results

    Science.gov (United States)

    Ong, Rene A.

    2000-06-01

    The Solar Tower Atmospheric Cherenkov Effect Experiment (STACEE) is designed to detect astrophysical sources of γ-rays at energies between 25 and 500 GeV. STACEE uses large solar mirrors (heliostats) to collect the atmospheric Cherenkov radiation produced in γ-ray air showers. The use of a large mirror collection area will allow STACEE to probe γ-ray sources at energies above the reach of the Compton Gamma Ray Observatory (CGRO), but below the reach of conventional Cherenkov telescopes. During the 1998-99 observing season, a portion of STACEE using 32 heliostats was installed at the National Solar Thermal Test Facility (NSTTF) of Sandia National Laboratories (Albuquerque, NM). This initial configuration (STACEE-32) observed a number of astronomical sources, including the Crab and several active galactic nuclei (AGN). Here we report on these observations. We highlight the experimental configuration and the preliminary results from the Crab data. The full STACEE experiment using 64 heliostats will be commissioned in 2000. .

  5. Preliminary design of surrounding heliostat fields

    Energy Technology Data Exchange (ETDEWEB)

    Collado, Francisco J. [Zaragoza University, Dpto. de Ingenieria Mecanica, CPS-B, Maria de Luna 3, 50018 Zaragoza (Spain)

    2009-05-15

    Recently, the author has shown elsewhere a simplified model that allows quick evaluations of the annual overall energy collected by a surrounding heliostat field. This model is the combination of an analytical flux density function produced by a heliostat, developed by the own author, and an optimized mirror density distribution developed by University of Houston for the Solar One Project. As main conclusion of this previous work, it was recognized that such pseudo-continuous simplified model should not substitute much more accurate discrete evaluations, which manage thousands of individual heliostat coordinates. Here in this work, the difficulty of generating a preliminary discrete layout of a large number of heliostats is addressed. The main novelty is the direct definition of thousands of heliostat coordinates through basically two parameters i.e. a simplified blocking factor and an additional security distance. Such procedure, which was formerly theoretically suggested by the author, is put into practice here, showing examples and commenting their problems and advantages. Getting a previous set of thousands of heliostat coordinates would be a major first step in the complex process of designing solar power tower (SPT). (author)

  6. ALMA Nutator Design and Preliminary Performance

    CERN Document Server

    Martin-Cocher, Pierre; Koch, Patrick M; Ni, Chih-Wen; Chen, Wei-Long; Chen, Ming-Tang; Raffin, Philippe; Ong, Chin-Long; Ho, Paul T P; Symmes, Arthur

    2013-01-01

    We report the past two years of collaboration between the di?erent actors on the ALMA nutator. Building on previous developments, the nutator has seen changes in much of the design. A high-modulus carbon ?fiber structure has been added on the back of the mirror in order to transfer the voice coils forces with less deformation, thus reducing delay problems due to flexing. The controller is now an off?-the-shelf National Instrument NI-cRIO, and the ampli?fier a class D servo drive from Advanced Motion Controls, with high peak power able to drive the coils at 300 Volts DC. The stow mechanism has been totally redesigned to improve on the repeatability and precision of the stow position, which is also the reference for the 26 bits Heidenhain encoders. This also improves on the accuracy of the stow position with wind loading. Finally, the software, written largely with National Instrument's LabView, has been developed. We will discuss these changes and the preliminary performances achieved to date. Keywords: ALMA, ...

  7. The deuteron accelerator preliminary design for BISOL

    Science.gov (United States)

    Peng, S. X.; Zhu, F.; Wang, Z.; Gao, Y.; Guo, Z. Y.

    2016-06-01

    BISOL, which was named as Beijing_ISOL before (Cui et al., 2013), is the abbreviation of Beijing Isotope-Separation-On-Line neutron beam facility. It is proposed jointly by Peking University (PKU) and China Institute of Atomic Energy (CIAE) for basic science study and application. It is a double driven facility that can be driven by a reactor or a deuteron accelerator. The deuteron driver accelerator should accelerate the deuteron beam up to 40 MeV with maximum beam current of 10 mA. Proton beams up to 33 MeV and He2+ beams up to 81.2 MeV can also be accelerated in this accelerator. The accelerator can be operated on either CW (continuous waveform) or pulsed mode, and the ion energy can be adjusted in a wide range. The accelerator will also allow independent operation of the RIB (Radioactive Ion Beams) system. It will be mainly charged by PKU group. Details of the deuteron accelerator preliminary design for BISOL will be given in this paper.

  8. Design of Mechanisms for Deployable, Optical Instruments: Guidelines for Reducing Hysteresis

    Science.gov (United States)

    Lake, Mark S.; Hachkowski, M. Roman

    2000-01-01

    This paper is intended to facilitate the development of deployable, optical instruments by providing a rational approach for the design, testing, and qualification of high-precision (i.e., low-hysteresis) deployment mechanisms for these instruments. Many of the guidelines included herein come directly from the field of optomechanical engineering, and are, therefore, neither newly developed guidelines, nor are they uniquely applicable to the design of high-precision deployment mechanisms. This paper is to be regarded as a guide to design and not a set of NASA requirements, except as may be defined in formal project specifications. Furthermore, due to the rapid pace of advancement in the field of precision deployment, this paper should be regarded as a preliminary set of guidelines. However, it is expected that this paper, with revisions as experience may indicate to be desirable, might eventually form the basis for a set of uniform design requirements for high-precision deployment mechanisms on future NASA space-based science instruments.

  9. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  10. Preliminary design package for prototype solar heating system

    Science.gov (United States)

    1978-01-01

    A summary is given of the preliminary analysis and design activity on solar heating systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include system candidates, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test.

  11. Methodology for Preliminary Design of Electrical Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Richard P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Stamp, Jason E. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Eddy, John P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Henry, Jordan M [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Munoz-Ramos, Karina [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Abdallah, Tarek [U.S. Army Corps of Engineers, Washington, DC (United States)

    2015-09-30

    Many critical loads rely on simple backup generation to provide electricity in the event of a power outage. An Energy Surety Microgrid TM can protect against outages caused by single generator failures to improve reliability. An ESM will also provide a host of other benefits, including integration of renewable energy, fuel optimization, and maximizing the value of energy storage. The ESM concept includes a categorization for microgrid value proposi- tions, and quantifies how the investment can be justified during either grid-connected or utility outage conditions. In contrast with many approaches, the ESM approach explic- itly sets requirements based on unlikely extreme conditions, including the need to protect against determined cyber adversaries. During the United States (US) Department of Defense (DOD)/Department of Energy (DOE) Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) effort, the ESM methodology was successfully used to develop the preliminary designs, which direct supported the contracting, construction, and testing for three military bases. Acknowledgements Sandia National Laboratories and the SPIDERS technical team would like to acknowledge the following for help in the project: * Mike Hightower, who has been the key driving force for Energy Surety Microgrids * Juan Torres and Abbas Akhil, who developed the concept of microgrids for military installations * Merrill Smith, U.S. Department of Energy SPIDERS Program Manager * Ross Roley and Rich Trundy from U.S. Pacific Command * Bill Waugaman and Bill Beary from U.S. Northern Command * Melanie Johnson and Harold Sanborn of the U.S. Army Corps of Engineers Construc- tion Engineering Research Laboratory * Experts from the National Renewable Energy Laboratory, Idaho National Laboratory, Oak Ridge National Laboratory, and Pacific Northwest National Laboratory

  12. Design and Verification Guidelines for Vibroacoustic and Transient Environments

    Science.gov (United States)

    1986-01-01

    Design and verification guidelines for vibroacoustic and transient environments contain many basic methods that are common throughout the aerospace industry. However, there are some significant differences in methodology between NASA/MSFC and others - both government agencies and contractors. The purpose of this document is to provide the general guidelines used by the Component Analysis Branch, ED23, at MSFC, for the application of the vibroacoustic and transient technology to all launch vehicle and payload components and payload components and experiments managed by NASA/MSFC. This document is intended as a tool to be utilized by the MSFC program management and their contractors as a guide for the design and verification of flight hardware.

  13. Health facilities humanisation: design guidelines supported by statistical evidence.

    Science.gov (United States)

    Bosia, Daniela; Marino, Donatella; Peretti, Gabriella

    2016-01-01

    Healthcare building humanisation is currently a widely debated issue and the development of patient centered and evidence based design is growing worldwide. Many international health organizations and researchers understand the importance of Patient Centred Design and leading architects incorporate it into the design process. In Italy this design approach is still at an early stage. The article refers to research commissioned by the Italian Health Ministry and carried out by R. Del Nord (Università degli Studi di Firenze) and G. Peretti (Politecnico di Torino) with their collaborators. The scope of the research was the definition of design guidelines for healthcare facilities humanisation. The methodology framework adopted is the well established need and performance approach in architectural design. The article deals with the results of statistical investigations for the definition and ranking of users' needs and the consistent expression of their requirements. The investigations were carried out with the cooperation of psychologists of the Università degli Studi di Torino and researchers of the Università degli Studi di Cagliari. The proposed evaluation system allows ranking of health facilities according to the level of humanisation achieved. The statistical investigation evidence collected allowed the definition of humanisation design guidelines for health-care facilities and for the assessment of their specific level of humanisation.

  14. Preliminary design review: Brayton Isotope Power System

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1977-03-01

    The design aspects covered include flight system design, design criteria/margins/reliability, GDS design, system analysis, materials, system assembly procedure, and government furnished equipment-BTPS. (TFD)

  15. Participatory design for computerization of clinical practice guidelines

    DEFF Research Database (Denmark)

    Lyng, Karen Marie; Pedersen, B. S.

    2011-01-01

    There have been made many attempts on computerization of clinical practice guidelines (CPGs), none have, however achieved any general application in clinical work practice. The objective of this paper is: (1) to raise awareness about the impact the design method used for computerization of CPGs......: PD as a design philosophy, PD as a toolbox and PD as a way to create a shared realm of understanding among IT-designers and health professionals as these are areas of utmost relevance for the design of computerized CPGs. Additionally, the application of PD for computerization of CPGs is illustrated...... by two cases. We conclude that PD is a beneficial approach for design of computerized CPGs. © 2011 Elsevier Inc....

  16. Design Guidelines for Quiet Fans and Pumps for Space Vehicles

    Science.gov (United States)

    Lovell, John S.; Magliozzi, Bernard

    2008-01-01

    This document presents guidelines for the design of quiet fans and pumps of the class used on space vehicles. A simple procedure is presented for the prediction of fan noise over the meaningful frequency spectrum. A section also presents general design criteria for axial flow fans, squirrel cage fans, centrifugal fans, and centrifugal pumps. The basis for this report is an experimental program conducted by Hamilton Standard under NASA Contract NAS 9-12457. The derivations of the noise predicting methods used in this document are explained in Hamilton Standard Report SVHSER 6183, "Fan and Pump Noise Control," dated May 1973 (6).

  17. Design guideline for plasmonic 16-QAM optical modulator

    Science.gov (United States)

    Al-mfrji, Alhuda A.; Tawfeeq, Shelan K.; Fyath, Raad S.

    2016-09-01

    This paper presents the design and investigation of 16-QAM optical modulator based on plasmonic-polymer hybrid slot waveguides. The design is CMOS-compatible and uses dual-parallel Mach-Zehnder modulator (DPMZM) followed by a phase modulator (PM). Careful consideration is given to design low loss photonic-plasmonic interfaces to ensure efficient coupling between silicon and plasmonic waveguide. The effect of slot widths on device performance is investigated comprehensively using COMSOL software simulation along with analytical analysis for both gold and silver contact. The results can be used as a guideline to design compact and high speed all-plasmonic 16-QAM modulators for 1550 nm wavelength communication systems.

  18. Underwater Munitions Expert System: Preliminary Design Report

    Science.gov (United States)

    2015-08-21

    coral   reefs ,  can  be  added  to  future  versions  of  UnMES.     For  this  preliminary  UnMES...administer  areas   polluted  by  discarded  munitions.    Towards  this  end,  SERDP  is   sponsoring   the   development...estimating   seawater   pollution   from   dissolved   chemical   components  of  munitions.    

  19. Preliminary design package for prototype solar heating and cooling systems

    Science.gov (United States)

    1978-01-01

    A summary is given of the preliminary analysis and design activity on solar heating and cooling systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include a market analysis, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test. Two heating and six heating and cooling units will be delivered for Single Family Residences, Multiple-family Residences and commercial applications.

  20. Sound & Vibration 20 Design Guidelines for Health Care Facilities

    CERN Document Server

    Tocci, Gregory; Cavanaugh, William

    2013-01-01

    Sound, vibration, noise and privacy have significant impacts on health and performance. As a result, they are recognized as essential components of effective health care environments. However, acoustics has only recently become a prominent consideration in the design, construction, and operation of healthcare facilities owing to the absence, prior to 2010, of clear and objective guidance based on research and best practices. Sound & Vibration 2.0 is the first publication to comprehensively address this need. Sound & Vibration 2.0 is the sole reference standard for acoustics in health care facilities and is recognized by: the 2010 FGI Guidelines for the Design and Construction of Health Care Facilities (used in 60 countries); the US Green Building Council’s LEED for Health Care (used in 87 countries); The Green Guide for Health Care V2.2; and the International Code Council (2011). Sound & Vibration 2.0 was commissioned by the Facility Guidelines Institute in 2005, written by the Health Care Acous...

  1. Preliminary design review report - sludge offload system

    Energy Technology Data Exchange (ETDEWEB)

    Mcwethy, L.M. Westinghouse Hanford

    1996-06-05

    This report documents the conceptual design review of the sludge offload system for the Spent Nuclear Fuel Project. The design description, drawings, available analysis, and safety analysis were reviewed by a peer group. The design review comments and resolutions are documented.

  2. Website Design Guidelines: High Power Distance and High Context Culture

    Directory of Open Access Journals (Sweden)

    Tanveer Ahmed

    2009-06-01

    Full Text Available This paper aims to address the question of offering a culturally adapted website for a local audience. So far, in the website design arena the vast majority of studies examined mainly Western and the American (low power distance and low context culture disregarding possible cultural discrepancies. This study fills this gap and explores the key cultural parameters that are likely to have an impact on local website design for Asian-Eastern culture high power distance and high context correlating with both Hofstede’s and Hall’s cultural dimensions. It also reviews how website localisation may be accomplished more effectively by extracting the guidelines from two different yet compatible cultural dimensions: high power distance and high context.

  3. Preliminary Design of a Femtosecond Oscilloscope

    CERN Document Server

    Gazazyan, Edmond D; Kalantaryan, Davit K; Laziev, Edouard; Margaryan, Amour

    2005-01-01

    The calculations on motion of electrons in a finite length electromagnetic field of linearly and circularly polarized laser beams have shown that one can use the transversal deflection of electrons on a screen at a certain distance after the interaction region for the measurement of the length and longitudinal particle distribution of femtosecond bunches. In this work the construction and preliminary parameters of various parts of a device that may be called femtosecond oscilloscope are considered. The influence of various factors, such as the energy spread and size of the electron bunches, are taken into account. For CO2 laser intensity 1016 W/cm2 and field free drift length 1m the deflection is 5.3 and 0.06 cm, while the few centimeters long interaction length between 2 mirrors requires assembling accuracy 6 mm and 1.3 micron for 20 MeV to 50 keV, respectively.

  4. Development of guidelines for inelastic analysis in design of fast reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Kyotada [Japan Atomic Energy Agency (JAEA), 4002, Narita, O-arai, Ibaraki 311-1393 (Japan); Kasahara, Naoto [Japan Atomic Energy Agency (JAEA), 4002, Narita, O-arai, Ibaraki 311-1393 (Japan)], E-mail: kasahara.naoto@jaea.go.jp; Morishita, Masaki [Japan Atomic Energy Agency (JAEA), 4002, Narita, O-arai, Ibaraki 311-1393 (Japan); Shibamoto, Hiroshi; Inoue, Kazuhiko [The Japan Atomic Power Company, Dispatched to JAEA, 4002, Narita, O-arai, Ibaraki 311-1393 (Japan); Nakayama, Yasunari [Kawasaki Heavy Industries, Ltd., 1-1, Kawasaki, Akashi, Hyogo 673-8666 (Japan)

    2008-02-15

    The interim guidelines for the application of inelastic analysis to design of fast reactor components were developed. These guidelines are referred from 'Elevated Temperature Structural Design Guide for Commercialized Fast Reactor (FDS)'. The basic policies of the guidelines are more rational predictions compared with elastic analysis approach and a guarantee of conservative results for design conditions. The guidelines recommend two kinds of constitutive equations to estimate strains conservatively. They also provide the methods for modeling load histories and estimating fatigue and creep damage based on the results of inelastic analysis. The guidelines were applied to typical design examples and their results were summarized as exemplars to support users.

  5. Volunteered Geographic Information System Design: Project and Participation Guidelines

    Directory of Open Access Journals (Sweden)

    José-Pablo Gómez-Barrón

    2016-07-01

    Full Text Available This article sets forth the early phases of a methodological proposal for designing and developing Volunteered Geographic Information (VGI initiatives based on a system perspective analysis in which the components depend and interact dynamically among each other. First, it focuses on those characteristics of VGI projects that present different goals and modes of organization, while using a crowdsourcing strategy to manage participants and contributions. Next, a tool is developed in order to design the central crowdsourced processing unit that is best suited for a specific project definition, associating it with a trend towards crowd-based or community-driven approaches. The design is structured around the characterization of different ways of participating, and the task cognitive demand of working on geo-information management, spatial problem solving and ideation, or knowledge acquisition. Then, the crowdsourcing process design helps to identify what kind of participants are needed and outline subsequent engagement strategies. This is based on an analysis of differences among volunteers’ participatory behaviors and the associated set of factors motivating them to contribute, whether on a crowd or community-sourced basis. From a VGI system perspective, this paper presents a set of guidelines and methodological steps in order to align project goals, processes and volunteers and thus successfully attract participation. This methodology helps establish the initial requirements for a VGI system, and, in its current state, it mainly focuses on two components of the system: project and participants.

  6. Equipment design guidelines for remote hot cell operations.

    Energy Technology Data Exchange (ETDEWEB)

    Wahlquist, D. R.

    1998-07-10

    Hot cells provide a unique and challenging environment for designing remotely operated equipment. A typical hot cell is an isolated room used to protect operators from highly contaminated and radioactive equipment. Hot cells usually have thick reinforced concrete walk and leaded glass windows. Operations within the hot cell are accomplished using master-slave manipulators and overhead crane or electro-mechanical manipulator systems. The inability to perform hands-on operation and maintenance in hot cells requires special design considerations. Some of these design considerations include operational interfaces, radiation, accessibility, replaceability/interchangeability, decontamination, atmospheric conditions, functionality, operator fatigue, and ease of use. This paper will discuss guidelines for designing hot cell remotely operated equipment that has been used successfully at Argonne National Laboratory. General topics in this paper will include master-slave manipulator types and limitations, overhead handling systems, viewing limitations, types and sizes of typical fasteners, hot cell compatible materials, mockup testing, guide features for mating parts, modularity, labeling, electrical fasteners, and lifting fixtures.

  7. Multidisciplinary Optimization Methods for Aircraft Preliminary Design

    Science.gov (United States)

    Kroo, Ilan; Altus, Steve; Braun, Robert; Gage, Peter; Sobieski, Ian

    1994-01-01

    This paper describes a research program aimed at improved methods for multidisciplinary design and optimization of large-scale aeronautical systems. The research involves new approaches to system decomposition, interdisciplinary communication, and methods of exploiting coarse-grained parallelism for analysis and optimization. A new architecture, that involves a tight coupling between optimization and analysis, is intended to improve efficiency while simplifying the structure of multidisciplinary, computation-intensive design problems involving many analysis disciplines and perhaps hundreds of design variables. Work in two areas is described here: system decomposition using compatibility constraints to simplify the analysis structure and take advantage of coarse-grained parallelism; and collaborative optimization, a decomposition of the optimization process to permit parallel design and to simplify interdisciplinary communication requirements.

  8. Preliminary conceptual design of DEMO EC system

    Energy Technology Data Exchange (ETDEWEB)

    Garavaglia, S., E-mail: garavaglia@ifp.cnr.it; Bin, W.; Bruschi, A.; Granucci, G.; Moro, A.; Rispoli, N. [Institute of Plasma Physics “P.Caldirola”, National Research Council of Italy, Milan (Italy); Grossetti, G.; Strauss, D. [IAM-AWP, Kaiserstr. 12, D-76131 Karlsruhe (Germany); Jelonnek, J. [IHM, KIT, Kaiserstr. 12, D-76131 Karlsruhe (Germany); Tran, Q. M. [CRPP, EPFL, EURATOM Association, CH-1015 Lausanne (Switzerland); Franke, T. [EUROfusion Consortium, Boltzmannstr. 2, D-85748 Garching (Germany); Max-Planck-Institut für Plasmaphysik, Garching (Germany)

    2015-12-10

    In the framework of EUROfusion Consortium the Work Package Heating and Current Drive addresses the engineering design and R&D for the electron cyclotron, ion cyclotron and neutral beam systems. This paper reports the activities performed in 2014, focusing on the work done regarding the input for the conceptual design of the EC system, particularly for the gyrotron, the transmission line and the launchers.

  9. Design guidelines of triboelectric nanogenerator for water wave energy harvesters

    Science.gov (United States)

    Ahmed, Abdelsalam; Hassan, Islam; Jiang, Tao; Youssef, Khalid; Liu, Lian; Hedaya, Mohammad; Abu Yazid, Taher; Zu, Jean; Wang, Zhong Lin

    2017-05-01

    Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester’s overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

  10. Design guidelines of triboelectric nanogenerator for water wave energy harvesters

    KAUST Repository

    Ahmed, Abdelsalam

    2017-04-11

    Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester\\'s overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

  11. Preliminary Conceptual Design for Safety Parameter display System of PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Hyunju; Seong, Seunghwan; Kim, Wansu; Kim, Donghoon; Son, Kwangseop; Jang, Gwisook [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    A PGSFR (prototype Gen-IV sodium-cooled fast reactor) is under development at KAERI. A safety parameter display system (SPDS) should be designed for licensing the PGSFR in order to cope with the TMI action plan requirements. Thus, a preliminary conceptual design for the SPDS of PGSFR including licensing requirements, intrinsic function, critical variables and alarm legs for the SPDS of the PGSFR is studied herein. At first, some documents issued by NRC related to install a SPDS include the following: - NUREG-0737, Clarification of TMI Action Plan Requirements - NUREG-0696, Functional Criteria for Emergency Response Facilities - NUREG-0835, Human Factors Acceptance Criteria for the Safety Parameter display System, Draft Report for Comment. The preliminary concept design for the SPDS of the PGSFR was studied. In designing of the PGSFR, the studied design concept will be refined and implemented through further studies to acquire the approval of a safety analysis report of the PGSFR.

  12. A decision support system for preliminary design

    NARCIS (Netherlands)

    Groot, E.H. de; Mallory, S.M.; Zutphen, R.H.M. van; Vries, B. de

    1999-01-01

    The design of buildings is a complex task for a variety of reasons. In the conceptual stage, particularly in the inception phase, a small number of people make decisions that have far reaching impact on the final result in terms of efficiency and effectiveness. Decision-making in the inception phase

  13. Aeroelastic Considerations in the Preliminary Design Aircraft

    Science.gov (United States)

    1983-09-01

    DESIGN OBJECTIVES FEM FASO MODELINGWEGS TRNFRAIS SIZING RIGID AtP .FIRST FIRST FLEX FIRST FLEXSTATICLOADS [ IZING STATIC LOADS SIZING UPDATEFLEX SIZING...Structural Optimization by ASAT A computer software system called ASAT (Automatische Struktur Auslegung von Trag- flchen) exists at MBB which allows

  14. A decision support system for preliminary design

    NARCIS (Netherlands)

    Groot, E.H. de; Mallory, S.M.; Zutphen, R.H.M. van; Vries, B. de

    1999-01-01

    The design of buildings is a complex task for a variety of reasons. In the conceptual stage, particularly in the inception phase, a small number of people make decisions that have far reaching impact on the final result in terms of efficiency and effectiveness. Decision-making in the inception phase

  15. Designing with the mind in mind simple guide to understanding user interface design guidelines

    CERN Document Server

    Johnson, Jeff

    2014-01-01

    In this completely updated and revised edition of Designing with the Mind in Mind, Jeff Johnson provides you with just enough background in perceptual and cognitive psychology that user interface (UI) design guidelines make intuitive sense rather than being just a list or rules to follow. Early UI practitioners were trained in cognitive psychology, and developed UI design rules based on it. But as the field has evolved since the first edition of this book, designers enter the field from many disciplines. Practitioners today have enough experience in UI design that they have been exposed to

  16. Design Preliminaries for Direct Drive under Water Wind Turbine Generator

    DEFF Research Database (Denmark)

    Leban, Krisztina Monika; Ritchie, Ewen; Argeseanu, Alin

    2012-01-01

    This paper focuses on the preliminary design process of a 20 MW electric generator. The application calls for an offshore, vertical axis, direct drive wind turbine. Arguments for selecting the type of electric machine for the application are presented and discussed. Comparison criteria for deciding...

  17. Design Guidelines: Study of Handicapped Accessibility in South Carolina State Parks.

    Science.gov (United States)

    South Carolina State Dept. of Parks, Recreation, and Tourism, Columbia. Div. of Engineering and Planning.

    The publication provides guidelines for the design of new facilities or rehabilitation of existing facilities to accommodate physically handicapped persons in the South Carolina State Parks system. The guidelines are also recommended for use in regional, special district, county, and municipal parks within the state. The guidelines were developed…

  18. Preliminary Tritium Management Design Activities at ORNL

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Thomas J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Felde, David K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Logsdon, Randall J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McFarlane, Joanna [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Qualls, A. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-09-01

    Interest in salt-cooled and salt-fueled reactors has increased over the last decade (Forsberg et al. 2016). Several private companies and universities in the United States, as well as governments in other countries, are developing salt reactor designs and/or technology. Two primary issues for the development and deployment of many salt reactor concepts are (1) the prevention of tritium generation and (2) the management of tritium to prevent release to the environment. In 2016, the US Department of Energy (DOE) initiated a research project under the Advanced Reactor Technology Program to (1) experimentally assess the feasibility of proposed methods for tritium mitigation and (2) to perform an engineering demonstration of the most promising methods. This document describes results from the first year’s efforts to define, design, and build an experimental apparatus to test potential methods for tritium management. These efforts are focused on producing a final design document as the basis for the apparatus and its scheduled completion consistent with available budget and approvals for facility use.

  19. Web 2.0 systems supporting childhood chronic disease management: design guidelines based on information behaviour and social learning theories.

    Science.gov (United States)

    Ekberg, Joakim; Ericson, Leni; Timpka, Toomas; Eriksson, Henrik; Nordfeldt, Sam; Hanberger, Lena; Ludvigsson, Johnny

    2010-04-01

    Self-directed learning denotes that the individual is in command of what should be learned and why it is important. In this study, guidelines for the design of Web 2.0 systems for supporting diabetic adolescents' every day learning needs are examined in light of theories about information behaviour and social learning. A Web 2.0 system was developed to support a community of practice and social learning structures were created to support building of relations between members on several levels in the community. The features of the system included access to participation in the culture of diabetes management practice, entry to information about the community and about what needs to be learned to be a full practitioner or respected member in the community, and free sharing of information, narratives and experience-based knowledge. After integration with the key elements derived from theories of information behaviour, a preliminary design guideline document was formulated.

  20. Preliminary design data package, appendix C. [hybrid electric vehicles

    Science.gov (United States)

    1979-01-01

    The data and documentation required to define the preliminary design of a near term hybrid vehicle and to quantify its operational characteristics are presented together with the assumptions and rationale behind the design decisions. Aspects discussed include development requirements for the propulsion system, the chassis system, the body, and the vehicle systems. Particular emphasis is given to the controls, the heat engine, and the batteries.

  1. Preliminary Thermal Design of Cryogenic Radiation Shielding

    Science.gov (United States)

    Li, Xiaoyi; Mustafi, Shuvo; Boutte, Alvin

    2015-01-01

    Cryogenic Hydrogen Radiation Shielding (CHRS) is the most mass efficient material radiation shielding strategy for human spaceflight beyond low Earth orbit (LEO). Future human space flight, mission beyond LEO could exceed one year in duration. Previous radiation studies showed that in order to protect the astronauts from space radiation with an annual allowable radiation dose less than 500 mSv, 140 kgm2 of polyethylene is necessary. For a typical crew module that is 4 meter in diameter and 8 meter in length. The mass of polyethylene radiation shielding required would be more than 17,500 kg. The same radiation study found that the required hydrogen shielding for the same allowable radiation dose is 40 kgm2, and the mass of hydrogen required would be 5, 000 kg. Cryogenic hydrogen has higher densities and can be stored in relatively small containment vessels. However, the CHRS system needs a sophisticated thermal system which prevents the cryogenic hydrogen from evaporating during the mission. This study designed a cryogenic thermal system that protects the CHRS from hydrogen evaporation for one to up to three year mission. The design also includes a ground based cooling system that can subcool and freeze liquid hydrogen. The final results show that the CHRS with its required thermal protection system is nearly half of the mass of polyethylene radiation shielding.

  2. Preliminary Mechanical Design of FHX for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Choo, Jinyup; Koo, G. H.; Kim, S. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    In this paper, more specific data from analysis and mechanical method of approach to design will be addressed. Especially, frame of tube bundle and housing of FHX. Heretofore, it is concept design by mechanical basic knowledge and research of various structures that are activating in realities. Especially, to reduce thermal stress, we have planning to attach insulations inside the housing. In as much as FHX is as important on SFR as the other part, hereafter, we will develop FEM to check feasibility of the FHX's housing design in order to perform static and thermal analysis as well as bucking, seismic and so on. The Forced-draft sodium-to-air Heat Exchanger system (FHX) (employed in the Active Decay Heat Removal System (ADHRS) is a shell-and-tube type counter-current flow heat exchanger with serpentine finned-tube arrangement. Liquid sodium flows over the finned tubes. The unit is placed above the reactor building and has function of dumping the system heat load into the final heat sink, i. e., the atmosphere. Heat is transmitted from the primary hot sodium pool into the ADHRS sodium loop via Decay Heat Exchanger (DHX), and a direct heat exchange occurs between the tube-side sodium and the shell-side air through the FHX sodium tube wall. Cold atmospheric air is introduced into the air inlet duct at the lower part of the unit by using an electrically driven air blower. Air flows across the finned tube bank rising upward direction to make uniform air flow with perfect mixing across the tubes. The finned tube bundle is placed inside a well-insulated casing. The air heated at the tube bank region is collected at the top of the unit and then is discharged through the air stack above the unit. Although a blower supplies atmospheric air into the FHX unit, a tall air stack is also provided to secure natural draft head of natural circulation air flow against a loss power supply. The stack also has rain protecting structures to prevent inflow of rain drops or undesired

  3. A preliminary design of a knot undulator.

    Science.gov (United States)

    Xi, Fuchun; Shi, Tan; Fan, Qingyan; Prestemon, Soren; Wan, Weishi; An, Zhenghua; Qiao, S

    2013-01-01

    The magnetic field configuration of the previously proposed knot undulator [Qiao et al. (2009). Rev. Sci. Instrum. 80, 085108] is realised in the design of a hybridized elliptically polarized undulator, which is presented. Although the details of the field distribution are not the same as those in the theoretical proposal, it is demonstrated that the practical knot undulator could work perfectly. In order to understand the minor discrepancies of the two, mathematical formulae of the synchrotron radiation are derived based on the Fourier transform of the magnetic field. From the results of calculations by simulation program, the discrepancies could be well interpreted by the corresponding formulae. The results show the importance of optimization of the end sections of the knot undulator to suppress the on-axis heat load. Furthermore, a study of the impact of the undulator on beam dynamics of the storage ring was conducted using the Shanghai Synchrotron Radiation Facility as an example and the results show that the knot undulator has little effect on the beam.

  4. Preliminary design of the Space Station internal thermal control system

    Science.gov (United States)

    Herrin, Mark T.; Patterson, David W.; Turner, Larry D.

    1987-01-01

    The baseline preliminary design configuration of the Internal Thermal Control system (ITCS) of the U.S. Space Station pressurized elements (i.e., the Habitation and U.S. Laboratory modules, pressurized logistics carrier, and resources nodes) is defined. The ITCS is composed of both active and passive components. The subsystems which comprise the ITCS are identified and their functional descriptions are provided. The significant trades and analyses, which were performed during Phase B (i.e., the preliminary design phase) that resulted in the design described herein, are discussed. The ITCS interfaces with the station's central Heat Rejection and Transport System (HRTS), other systems, and externally attached pressurized payloads are described. Requirements on the ITCS with regard to redundancy and experiment support are also addressed.

  5. Preliminary design report for OTEC stationkeeping subsystems (SKSS)

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-12

    Lockheed Ocean Systems with IMODCO prepared these preliminary designs for OTEC Stationkeeping Subsystems (SKSS) under contract to NOAA in support of the Department of Energy OTEC program. The results of Tasks III, V, and VI are presented in this design report. The report consists of five sections: introduction, preliminary designs for the multiple anchor leg (MAL) and tension anchor leg (TAL), costs and schedule, and conclusions. Extensive appendixes provide detailed descriptions of design methodology and include backup calculations and data to support the results presented. The objective of this effort is to complete the preliminary designs for the barge-MAL and Spar-TAL SKSS. A set of drawings is provided for each which show arrangements, configuration, component details, engineering description, and deployment plan. Loads analysis, performance assessment, and sensitivity to requirements are presented, together with the methodology employed to analyze the systems and to derive the results presented. Life cycle costs and schedule are prepared and compared on a common basis. Finally, recommendations for the Commercial Plant SKSS are presented for both platform types.

  6. Gemini Planet Imager: Preliminary Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Macintosh, B

    2007-05-10

    completely limited by quasi-static wave front errors, so that contrast does not improve with integration times longer than about 1 minute. Using the rotation of the Earth to distinguish companions from artifacts or multiwavelength imaging improves this somewhat, but GPI will still need to surpass the performance of existing systems by one to two orders of magnitude--an improvement comparable to the transition from photographic plates to CCDs. This may sound daunting, but other areas of optical science have achieved similar breakthroughs, for example, the transition to nanometer-quality optics for extreme ultraviolet lithography, the development of MEMS wave front control devices, and the ultra-high contrast demonstrated by JPL's High Contrast Imaging Test-bed. In astronomy, the Sloan Digital Sky Survey, long baseline radio interferometry, and multi-object spectrographs have led to improvements of similar or greater order of magnitude. GPI will be the first project to apply these revolutionary techniques to ground-based astronomy, with a systems engineering approach that studies the impact of every design decision on the key metric--final detectable planet contrast.

  7. Expert validation of fit-for-purpose guidelines for designing programmes of assessment

    Directory of Open Access Journals (Sweden)

    Dijkstra Joost

    2012-04-01

    Full Text Available Abstract Background An assessment programme, a purposeful mix of assessment activities, is necessary to achieve a complete picture of assessee competence. High quality assessment programmes exist, however, design requirements for such programmes are still unclear. We developed guidelines for design based on an earlier developed framework which identified areas to be covered. A fitness-for-purpose approach defining quality was adopted to develop and validate guidelines. Methods First, in a brainstorm, ideas were generated, followed by structured interviews with 9 international assessment experts. Then, guidelines were fine-tuned through analysis of the interviews. Finally, validation was based on expert consensus via member checking. Results In total 72 guidelines were developed and in this paper the most salient guidelines are discussed. The guidelines are related and grouped per layer of the framework. Some guidelines were so generic that these are applicable in any design consideration. These are: the principle of proportionality, rationales should underpin each decisions, and requirement of expertise. Logically, many guidelines focus on practical aspects of assessment. Some guidelines were found to be clear and concrete, others were less straightforward and were phrased more as issues for contemplation. Conclusions The set of guidelines is comprehensive and not bound to a specific context or educational approach. From the fitness-for-purpose principle, guidelines are eclectic, requiring expertise judgement to use them appropriately in different contexts. Further validation studies to test practicality are required.

  8. Variant Designing in the Preliminary Small Ship Design Process

    Directory of Open Access Journals (Sweden)

    Karczewski Artur

    2017-06-01

    Full Text Available Ship designing is a complex process, as the ship itself is a complex, technical multi-level object which operates in the air/water boundary environment and is exposed to the action of many different external and internal factors resulting from the adopted technical solutions, type of operation, and environmental conditions. A traditional ship design process consists of a series of subsequent multistage iterations, which gradually increase the design identification level. The paper presents problems related to the design of a small untypical vessel with the aid of variant methodology making use of optimisation algorithms. The computer-aided design methodology has been developed which does not need permanent reference to already built real ships and empirical-statistical relations. Possibilities were indicated for integrating together early design stages, and parallel designing of hull shape and parameters.

  9. Preliminary Design Report for the Yakima/Klickitat Production Project.

    Energy Technology Data Exchange (ETDEWEB)

    US Bonneville Power Administration

    1990-04-01

    A master plan for the Yakima/Klickitat Production Project (YKPP) was developed by the Northwest Power Planning Council (Council) on October 15, 1987, as a reasonable basis upon which the Bonneville Power Administration (BPA) could proceed to fund predesign work on the project. The Council approved the predesign work on the condition that eight preliminary tasks were completed. These tasks are: Task 1. Agreement on a refined statement of project goals. Task 2. Completion of a technical analysis of water supplies. Task 3. Completion of an experimental design plan. Task 4. Development of a harvest management plan. Task 5. Assessment of potential genetic risks. Task 6. Project coordination with all other affected parties. Task 7. Submission of a preliminary design report to the Council. Task 8. Develop a project management structure. The preliminary design report summarizes the work completed on these tasks. It provides a description of the preliminary design, engineering, and construction phases of project development, and gives an estimate of project costs. Also included is a description of other studies that were conducted to support YKPP planning. The results of studies conducted during the last 30 months indicate that hatchery facilities can be built in the Yakima and Klickitat subbasins to provide harvest benefits and to supplement natural production. Planning for the Yakima subbasin is at a more advanced stage of development than for the Klickitat subbasin because of greater availability of basic resource information. The information needed to proceed with final design and construction for the Klickitat subbasin will be available by 1992, as ongoing predesign work continues. This schedule is consistent with the anticipated phased completion of the YKPP by 1997.

  10. Preliminary design of the ITER ECH Upper Launcher

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, D., E-mail: dirk.strauss@kit.edu [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Aiello, G. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Chavan, R. [Centre de Recherches en Physique des Plasmas, CRPP–EPFL, CH-1015 Lausanne (Switzerland); Cirant, S. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Baar, M. de [FOM, Van Vollenhovenlaan 659, 3527 JP, Utrecht (Netherlands); Farina, D. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Gantenbein, G. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Goodman, T.P. [Centre de Recherches en Physique des Plasmas, CRPP–EPFL, CH-1015 Lausanne (Switzerland); Henderson, M.A. [ITER Organization, 13108 Saint-Paul-lez-Durance (France); Kasparek, W. [Institut für Plasmaforschung, IPF, D-70569 Stuttgart (Germany); Kleefeldt, K. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Landis, J.-D. [Centre de Recherches en Physique des Plasmas, CRPP–EPFL, CH-1015 Lausanne (Switzerland); Meier, A. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Moro, A.; Platania, P. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Plaum, B. [Institut für Plasmaforschung, IPF, D-70569 Stuttgart (Germany); Poli, E. [Max-Planck-IPP, Euratom Association, D-85748 Garching (Germany); Ramponi, G. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Ronden, D. [FOM, Van Vollenhovenlaan 659, 3527 JP, Utrecht (Netherlands); Saibene, G. [Fusion for Energy, Barcelona (Spain); and others

    2013-11-15

    Highlights: • Front steering mirror design. • Plasma facing blanket shield module/first wall panel design. • Fixed frequency torus CVD diamond window serving as first tritium barrier. • Prototypes and tests of the above key components in the Launcher Handling and Testing Facility. -- Abstract: The design of the ITER electron cyclotron launchers recently reached the preliminary design level - the last major milestone before design finalization. The ITER ECH system contains 24 installed gyrotrons providing a maximum ECH injected power of 20 MW through transmission lines towards the tokamak. There are two EC launcher types both using a front steering mirror; one equatorial launcher (EL) for plasma heating and four upper launchers (UL) for plasma mode stabilization (neoclassical tearing modes and the sawtooth instability). A wide steering angle range of the ULs allows focusing of the beam on magnetic islands which are expected on the rational magnetic flux surfaces q = 1 (sawtooth instability), q = 3/2 and q = 2 (NTMs). In this paper the preliminary design of the ITER ECH UL is presented, including the optical system and the structural components. Highlights of the design include the torus CVD-diamond windows, the frictionless, front steering mechanism and the plasma facing blanket shield module (BSM). Numerical simulations as well as prototype tests are used to verify the design.

  11. Design guidelines for high dimensional stability of CFRP optical bench

    Science.gov (United States)

    Desnoyers, Nichola; Boucher, Marc-André; Goyette, Philippe

    2013-09-01

    In carbon fiber reinforced plastic (CFRP) optomechanical structures, particularly when embodying reflective optics, angular stability is critical. Angular stability or warping stability is greatly affected by moisture absorption and thermal gradients. Unfortunately, it is impossible to achieve the perfect laminate and there will always be manufacturing errors in trying to reach a quasi-iso laminate. Some errors, such as those related to the angular position of each ply and the facesheet parallelism (for a bench) can be easily monitored in order to control the stability more adequately. This paper presents warping experiments and finite-element analyses (FEA) obtained from typical optomechanical sandwich structures. Experiments were done using a thermal vacuum chamber to cycle the structures from -40°C to 50°C. Moisture desorption tests were also performed for a number of specific configurations. The selected composite material for the study is the unidirectional prepreg from Tencate M55J/TC410. M55J is a high modulus fiber and TC410 is a new-generation cyanate ester designed for dimensionally stable optical benches. In the studied cases, the main contributors were found to be: the ply angular errors, laminate in-plane parallelism (between 0° ply direction of both facesheets), fiber volume fraction tolerance and joints. Final results show that some tested configurations demonstrated good warping stability. FEA and measurements are in good agreement despite the fact that some defects or fabrication errors remain unpredictable. Design guidelines to maximize the warping stability by taking into account the main dimensional stability contributors, the bench geometry and the optical mount interface are then proposed.

  12. Towards landscape design guidelines for reducing Lyme disease risk.

    Science.gov (United States)

    Jackson, Laura E; Hilborn, Elizabeth D; Thomas, James C

    2006-04-01

    Incidence of Lyme disease in the US continues to grow. Low-density development is also increasing in endemic regions, raising questions about the relationship between development pattern and disease. This study sought to model Lyme disease incidence rate using quantitative, practical metrics of regional landscape pattern. The objective was to progress towards the development of design guidelines that may help minimize known threats to human and environmental health. Ecological analysis was used to accommodate the integral landscape variables under study. Case data derived from passive surveillance reports across 12 counties in the US state of Maryland during 1996-2000; 2,137 cases were spatially referenced to residential addresses. Major roads were used to delineate 514 landscape analysis units from 0.002 to 580 km(2). The parameter that explained the most variation in incidence rate was the percentage of land-cover edge represented by the adjacency of forest and herbaceous cover [R(2) = 0.75; rate ratio = 1.34 (1.26-1.43); P landscape in forest cover (cumulative R(2) = 0.82), which exhibited a quadratic relationship with incidence rate. Modelled relationships applied throughout the range of landscape sizes. Results begin to provide quantitative landscape design parameters for reducing casual peridomestic contact with tick and host habitat. The final model suggests that clustered forest and herbaceous cover, as opposed to high forest-herbaceous interspersion, would minimize Lyme disease risk in low-density residential areas. Higher-density development that precludes a large percentage of forest-herbaceous edge would also limit exposure.

  13. Preliminary design study of the TMT Telescope structure system: overview

    Science.gov (United States)

    Usuda, Tomonori; Ezaki, Yutaka; Kawaguchi, Noboru; Nagae, Kazuhiro; Kato, Atsushi; Takaki, Junji; Hirano, Masaki; Hattori, Tomoya; Tabata, Masaki; Horiuchi, Yasushi; Saruta, Yusuke; Sofuku, Satoru; Itoh, Noboru; Oshima, Takeharu; Takanezawa, Takashi; Endo, Makoto; Inatani, Junji; Iye, Masanori; Sadjadpour, Amir; Sirota, Mark; Roberts, Scott; Stepp, Larry

    2014-07-01

    We present an overview of the preliminary design of the Telescope Structure System (STR) of Thirty Meter Telescope (TMT). NAOJ was given responsibility for the TMT STR in early 2012 and engaged Mitsubishi Electric Corporation (MELCO) to take over the preliminary design work. MELCO performed a comprehensive preliminary design study in 2012 and 2013 and the design successfully passed its Preliminary Design Review (PDR) in November 2013 and April 2014. Design optimizations were pursued to better meet the design requirements and improvements were made in the designs of many of the telescope subsystems as follows: 1. 6-legged Top End configuration to support secondary mirror (M2) in order to reduce deformation of the Top End and to keep the same 4% blockage of the full aperture as the previous STR design. 2. "Double Lower Tube" of the elevation (EL) structure to reduce the required stroke of the primary mirror (M1) actuators to compensate the primary mirror cell (M1 Cell) deformation caused during the EL angle change in accordance with the requirements. 3. M1 Segment Handling System (SHS) to be able to make removing and installing 10 Mirror Segment Assemblies per day safely and with ease over M1 area where access of personnel is extremely difficult. This requires semi-automatic sequence operation and a robotic Segment Lifting Fixture (SLF) designed based on the Compliance Control System, developed for controlling industrial robots, with a mechanism to enable precise control within the six degrees of freedom of position control. 4. CO2 snow cleaning system to clean M1 every few weeks that is similar to the mechanical system that has been used at Subaru Telescope. 5. Seismic isolation and restraint systems with respect to safety; the maximum acceleration allowed for M1, M2, tertiary mirror (M3), LGSF, and science instruments in 1,000 year return period earthquakes are defined in the requirements. The Seismic requirements apply to any EL angle, regardless of the

  14. NRT Rotor Structural / Aeroelastic Analysis for the Preliminary Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Ennis, Brandon Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Paquette, Joshua A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    This document describes the initial structural design for the National Rotor Testbed blade as presented during the preliminary design review at Sandia National Laboratories on October 28- 29, 2015. The document summarizes the structural and aeroelastic requirements placed on the NRT rotor for satisfactory deployment at the DOE/SNL SWiFT experimental facility to produce high-quality datasets for wind turbine model validation. The method and result of the NRT blade structural optimization is also presented within this report, along with analysis of its satisfaction of the design requirements.

  15. Preliminary Design of a LSA Aircraft Using Wind Tunnel Tests

    Directory of Open Access Journals (Sweden)

    Norbert ANGI

    2015-12-01

    Full Text Available This paper presents preliminary results concerning the design and aerodynamic calculations of a light sport aircraft (LSA. These were performed for a new lightweight, low cost, low fuel consumption and long-range aircraft. The design process was based on specific software tools as Advanced Aircraft Analysis (AAA, XFlr 5 aerodynamic and dynamic stability analysis, and Catia design, according to CS-LSA requirements. The calculations were accomplished by a series of tests performed in the wind tunnel in order to assess experimentally the aerodynamic characteristics of the airplane.

  16. Guideline for the Graphic Design of Web Application for Children’s Interface

    Directory of Open Access Journals (Sweden)

    Tengku Siti Meriam Tengku Wook

    2013-06-01

    Full Text Available There have been numerous studies done on the guidelines of user interface, but only a number of them have considered specific guidelines for the design of children’s interface. This paper is about a research on the specific guidelines for children, focusing on the criteria of graphic design. The objective of this research is to study on the guidelines of user interface design and to develop specific guidelines on children’s graphic design. The criteria of graphic design are the priority of this research since previous research have proven that graphic design is the main factor which contributes to the problem of usability of web application interfaces, in terms of the overall graphic layout not being in a hierarchical order, not taken into concern the availability of space, inappropriate margin, improper type and font size selection, and less concentration on the use of the colours. The research methodology makes use of the comparison of and the coordination to the guidelines on children’s interface and the specific guidelines on the graphic design of web application interfaces. The contribution of this research is the guidelines on the design of web application graphics which are specifically for children.

  17. The Puzzling Life of Autistic Toddlers: Design Guidelines from the LINKX Project

    NARCIS (Netherlands)

    Van Rijn, H.; Stappers, P.J.

    2008-01-01

    This paper presents guidelines for designers to help them consider what children with autism value in interactions with their environment. The guidelines were developed during the LINKX project in order to design a language learning toy for these children and are based on literature study, expert in

  18. Deep Underground Science and Engineering Laboratory - Preliminary Design Report

    CERN Document Server

    Lesko, Kevin T; Alonso, Jose; Bauer, Paul; Chan, Yuen-Dat; Chinowsky, William; Dangermond, Steve; Detwiler, Jason A; De Vries, Syd; DiGennaro, Richard; Exter, Elizabeth; Fernandez, Felix B; Freer, Elizabeth L; Gilchriese, Murdock G D; Goldschmidt, Azriel; Grammann, Ben; Griffing, William; Harlan, Bill; Haxton, Wick C; Headley, Michael; Heise, Jaret; Hladysz, Zbigniew; Jacobs, Dianna; Johnson, Michael; Kadel, Richard; Kaufman, Robert; King, Greg; Lanou, Robert; Lemut, Alberto; Ligeti, Zoltan; Marks, Steve; Martin, Ryan D; Matthesen, John; Matthew, Brendan; Matthews, Warren; McConnell, Randall; McElroy, William; Meyer, Deborah; Norris, Margaret; Plate, David; Robinson, Kem E; Roggenthen, William; Salve, Rohit; Sayler, Ben; Scheetz, John; Tarpinian, Jim; Taylor, David; Vardiman, David; Wheeler, Ron; Willhite, Joshua; Yeck, James

    2011-01-01

    The DUSEL Project has produced the Preliminary Design of the Deep Underground Science and Engineering Laboratory (DUSEL) at the rehabilitated former Homestake mine in South Dakota. The Facility design calls for, on the surface, two new buildings - one a visitor and education center, the other an experiment assembly hall - and multiple repurposed existing buildings. To support underground research activities, the design includes two laboratory modules and additional spaces at a level 4,850 feet underground for physics, biology, engineering, and Earth science experiments. On the same level, the design includes a Department of Energy-shepherded Large Cavity supporting the Long Baseline Neutrino Experiment. At the 7,400-feet level, the design incorporates one laboratory module and additional spaces for physics and Earth science efforts. With input from some 25 science and engineering collaborations, the Project has designed critical experimental space and infrastructure needs, including space for a suite of multi...

  19. The Mixed Waste Management Facility. Preliminary design review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This document presents information about the Mixed Waste Management Facility. Topics discussed include: cost and schedule baseline for the completion of the project; evaluation of alternative options; transportation of radioactive wastes to the facility; capital risk associated with incineration; radioactive waste processing; scaling of the pilot-scale system; waste streams to be processed; molten salt oxidation; feed preparation; initial operation to demonstrate selected technologies; floorplans; baseline revisions; preliminary design baseline; cost reduction; and project mission and milestones.

  20. Preliminary design of large reflectors with flat facets

    Science.gov (United States)

    Agrawal, P. K.; Anderson, M. S.; Card, M. F.

    1981-01-01

    A concept for approximating curved antenna surfaces using flat facets is discussed. A preliminary design technique for determining the size of the reflector surface facets necessary to meet antenna surface accuracy requirements is presented. A proposed large microwave radiometer satellite (MRS) is selected as an application, and the far-field electromagnetic response of a faceted reflector surface is compared with that from a spherical reflector surface.

  1. OSU TOMF Program Site Selection and Preliminary Concept Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Spadling, Steve [Oklahoma State Univ., Stillwater, OK (United States)

    2012-05-10

    The purpose of this report is to confirm the programmatic requirements for the new facilities, identify the most appropriate project site, and develop preliminary site and building concepts that successfully address the overall project goals and site issues. These new facilities will be designed to accommodate the staff, drivers and maintenance requirements for the future mixed fleet of passenger vehicles, Transit Style Buses and School Buses.

  2. The Mixed Waste Management Facility. Preliminary design review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This document presents information about the Mixed Waste Management Facility. Topics discussed include: cost and schedule baseline for the completion of the project; evaluation of alternative options; transportation of radioactive wastes to the facility; capital risk associated with incineration; radioactive waste processing; scaling of the pilot-scale system; waste streams to be processed; molten salt oxidation; feed preparation; initial operation to demonstrate selected technologies; floorplans; baseline revisions; preliminary design baseline; cost reduction; and project mission and milestones.

  3. Biomechanics of injury prediction for anthropomorphic manikins - preliminary design considerations

    Energy Technology Data Exchange (ETDEWEB)

    Engin, A.E. [Univ. of South Alabama, Mobile, AL (United States)

    1996-12-31

    The anthropomorphic manikins are used in automobile safety research as well as in aerospace related applications. There is now a strong need to advance the biomechanics knowledge to determine appropriate criteria for injury likelihood prediction as functions of manikin-measured responses. In this paper, three regions of a manikin, namely, the head, knee joint, and lumbar spine are taken as examples to introduce preliminary design considerations for injury prediction by means of responses of theoretical models and strategically placed sensing devices.

  4. Preliminary design of the PANSAT electrical power subsystem

    OpenAIRE

    Noble, Michael Lynn

    1990-01-01

    Approved for public release; distribution unlimited. This thesis presents a preliminary design of the electrical power system (EPS) for the Naval Postgraduate School's Petite Amateur Navy Satellite (PANSAT). The EPS is a photovoltaic silicon cell system consisting of solar array, batteries, battery charge regulator (BCR), and dc-dc convertors. The EPS provides power for up to two years of low earth orbit (480 km) operations. The solar array consists of 17 panels with thirty-two 2x4 cm sola...

  5. Strategy Guideline: Modeling Enclosure Design in Above-Grade Walls

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, J. [Building Science Corporation, Westford, MA (United States); Ueno, K. [Building Science Corporation, Westford, MA (United States); Musunuru, S. [Building Science Corporation, Westford, MA (United States)

    2016-02-24

    The Strategy Guideline describes how to model and interpret results of models for above grade walls. The Measure Guideline analyzes the failure thresholds and criteria for above grade walls. A library of above-grade walls with historically successful performance was used to calibrate WUFI (Warme Und Feuchte Instationar) software models. The information is generalized for application to a broad population of houses within the limits of existing experience.

  6. Engineering Design Handbook. Helicopter Engineering. Part One. Preliminary Design

    Science.gov (United States)

    1974-08-30

    by estimation, compound helicopter performance, to think of the air- plots of effective lift and drag areas and pitching mo- craft as a biplane having...stncural design problems but may produce loads that where are critikal locally. A = presented arms ft’ Ca = drag coefficient, dimensionless F• V = wind speed...groups is to be provided in accordance with MIL-STD- 1374, Part I. The useful load condition shall be as I. W. H. Ballhaus, Clear Design Thinking Using

  7. Preliminary design package for solar heating and hot water system

    Energy Technology Data Exchange (ETDEWEB)

    Levine, P.; Meyer, R.; White, James S.

    1977-01-01

    A collection of documents submitted by the Fern Engineering Company for the preliminary design review on the development of two prototype solar heating and hot water systems is presented. The information includes system certification, system functional description, system configuration, system specification, system performance and other documents pertaining to the progress and the design of the system. This system, which is intended for use in the normal single-family residence, consists of the following subsystems: collector, storage, control, transport, and Government-furnished Site Data Acquisition. One of the two prototype units will be installed in Lansing, Michigan, and the other in Tunkhannock, Pennsylvania.

  8. Bates solar industrial process-steam application: preliminary design review

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-07

    The design is analyzed for a parabolic trough solar process heat system for a cardboard corrugation fabrication facility in Texas. The program is briefly reviewed, including an analysis of the plant and process. The performance modeling for the system is discussed, and the solar system structural design, collector subsystem, heat transport and distribution subsystem are analyzed. The selection of the heat transfer fluid, and ullage and fluid maintenance are discussed, and the master control system and data acquisition system are described. Testing of environmental degradation of materials is briefly discussed. A brief preliminary cost analysis is included. (LEW)

  9. Design and preliminary testing of the RIC hybrid knee prosthesis.

    Science.gov (United States)

    Lenzi, T; Sensinger, J; Lipsey, J; Hargrove, L; Kuiken, T

    2015-08-01

    We present a novel hybrid knee prosthesis that uses a motor, transmission and control system only for active dynamics tasks, while relying on a spring/damper system for passive dynamics activities. Active dynamics tasks require higher torque, lower speed, and occur less frequently than passive dynamic activities. By designing the actuation system around active tasks alone, we achieved a lightweight design (1.7 Kg w/o battery) without sacrificing peak torque (85Nm repetitive). Preliminary tests performed by an able-bodied person using a bypass orthosis show that the hybrid knee can support reciprocal stairs ambulation with low electrical energy consumption.

  10. AGC-1 Experiment and Final Preliminary Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Robert L. Bratton; Tim Burchell

    2006-08-01

    This report details the experimental plan and design as of the preliminary design review for the Advanced Test Reactor Graphite Creep-1 graphite compressive creep capsule. The capsule will contain five graphite grades that will be irradiated in the Advanced Test Reactor at the Idaho National Laboratory to determine the irradiation induced creep constants. Seven other grades of graphite will be irradiated to determine irradiated physical properties. The capsule will have an irradiation temperature of 900 C and a peak irradiation dose of 5.8 x 10{sup 21} n/cm{sup 2} [E > 0.1 MeV], or 4.2 displacements per atom.

  11. Design Guidelines of a Spring-Damper System for Emergency Diesel Generator Sets

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min Kyu; Choun, Young Sun; Seo, Jeong Moon

    2007-05-15

    This guidelines described about the procedure of isolation system design for Emergency Diesel Generator (EDG) of Nuclear Power Plant (NPP). First of all, a vibration concept including the ground vibration was described and vibration control system and seismic isolation system were considered. The behavior characteristics and design consideration of coil spring-viscose damper system were summarized. The material properties of foundation of EDG system and the ground were considered. A design load and seismic load for isolation system design were described and an analysis method was explained. Finally, a design example for an EDG in Yonggwang Nuclear Unit 5 and 6 was attached of Appendix. First of all, this design guideline can apply to design of a vibration and seismic isolation system for EDG system and the design example present a design procedure practically. Moreover, this design guideline can be used for isolation design of other rotational machines and other isolation system except spring-damper system.

  12. TPX: Contractor preliminary design review. Volume 3, Design and analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-30

    Several models have been formed for investigating the maximum electromagnetic loading and magnetic field levels associated with the Tokamak Physics eXperiment (TPX) superconducting Poloidal Field (PF) coils. The analyses have been performed to support the design of the individual fourteen hoop coils forming the PF system. The coils have been sub-divided into three coil systems consisting of the central solenoid (CS), PF5 coils, and the larger radius PF6 and PF7 coils. Various electromagnetic analyses have been performed to determine the electromagnetic loadings that the coils will experience during normal operating conditions, plasma disruptions, and fault conditions. The loadings are presented as net body forces acting individual coils, spatial variations throughout the coil cross section, and force variations along the path of the conductor due to interactions with the TF coils. Three refined electromagnetic models of the PF coil system that include a turn-by-turn description of the fields and forces during a worst case event are presented in this report. A global model including both the TF and PF system was formed to obtain the force variations along the path of the PF conductors resulting from interactions with the TF currents. In addition to spatial variations, the loadings are further subdivided into time-varying and steady components so that structural fatigue issues can be addressed by designers and analysts. Other electromagnetic design issues such as the impact of the detailed coil designs on field errors are addressed in this report. Coil features that are analyzed include radial transitions via short jogs vs. spiral type windings and the effects of layer-to-layer rotations (i.e clocking) on the field errors.

  13. 4MOST systems engineering: from conceptual design to preliminary design review

    Science.gov (United States)

    Bellido-Tirado, Olga; Frey, Steffen; Barden, Samuel C.; Brynnel, Joar; Giannone, Domenico; Haynes, Roger; de Jong, Roelof S.; Phillips, Daniel; Schnurr, Olivier; Walcher, Jakob; Winkler, Roland

    2016-08-01

    The 4MOST Facility is a high-multiplex, wide-field, brief-fed spectrograph system for the ESO VISTA telescope. It aims to create a world-class spectroscopic survey facility unique in its combination of wide-field multiplex, spectral resolution, spectral coverage, and sensitivity. At the end of 2014, after a successful concept optimization design phase, 4MOST entered into its Preliminary Design Phase. Here we present the process and tools adopted during the Preliminary Design Phase to define the subsystems specifications, coordinate the interface control documents and draft the system verification procedures.

  14. Supporting industrial equipment development through a set of design-for-maintenance guidelines

    OpenAIRE

    W. Mulder; Basten, R.J.I.; Jauregui Becker, J.M.; Blok, J.; Hoekstra, S.; Kokkeler, F.G.M.; Marjanovic, Dorian; Storga, Mario; Pavkovic, Neven; Bojcetic, Nenad

    2014-01-01

    This paper presents a leaflet with design-for-maintenance guidelines. It aims at supporting developers of industrial equipment in their design-for-maintenance practices. The use of this leaflet should lead to increased attention for design-for-maintenance aspects and to improve idea generation. The way of presenting the guidelines to the user should ensure that the support will be adopted in practice. The feedback that we have received from industrial partners indicates that the support is us...

  15. Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

    Science.gov (United States)

    Woo, E H C; White, P; Lai, C W K

    2016-03-01

    This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

  16. Voltage-Controlled Sapphire Oscillator: Design, Development, and Preliminary Performance

    Science.gov (United States)

    Wang, R. T.; Dick, G. J.; Tjoelker, R. L.

    2007-08-01

    We present the design for a new short-term frequency standard, the voltage-controlled sapphire oscillator, as a practical and lower-cost alternative to a cryogenic sapphire oscillator operating at liquid helium temperatures. Performance goals are a frequency stability of 1 x 10^-14 (1 second equal to or less than tau equal to or less than 100 seconds), more than 2 years of continuous operation, and practical operability. Key elements include the sapphire resonator, low-power and long-life cryocooler, frequency compensation method, and cryo-Pound design. We report the design verification, experimental results, and test results of the cryocooler environmental sensitivity, as well as a preliminary stability measurement.

  17. Preliminary Design of Reluctance Motors for Light Electric Vehicles Driving

    Directory of Open Access Journals (Sweden)

    TRIFA, V.

    2009-02-01

    Full Text Available The paper presents the aspects regarding FEM analysis of a reluctant motor for direct driving of the light electric vehicles. The reluctant motor take into study is of special construction suitable for direct drive of a light electric vehicle. It is an inverse radial reluctant motor, with a fixed stator mounted on front wheel shaft and an external toothed rotor fixed on the front wheel itself. A short presentation of preliminary design is continued with the FEM analysis in order to provide the optimal geometry of the motor and adequate windings.

  18. Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  19. Metal wastage design guidelines for bubbling fluidized-bed combustors. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lyczkowski, R.W.; Podolski, W.F.; Bouillard, J.X.; Folga, S.M. [Argonne National Lab., IL (United States)

    1992-11-01

    These metal wastage design guidelines identify relationships between metal wastage and (1) design parameters (such as tube size, tube spacing and pitch, tube bundle and fluidized-bed height to distributor, and heat exchanger tube material properties) and (2) operating parameters (such as fluidizing velocity, particle size, particle hardness, and angularity). The guidelines are of both a quantitative and qualitative nature. Simplified mechanistic models are described, which account for the essential hydrodynamics and metal wastage processes occurring in bubbling fluidized beds. The empirical correlational approach complements the use of these models in the development of these design guidelines. Data used for model and guideline validation are summarized and referenced. Sample calculations and recommended design procedures are included. The influences of dependent variables on metal wastage, such as solids velocity, bubble size, and in-bed pressure fluctuations, are discussed.

  20. Revising the South African guidelines for human settlement planning and design (the red book)

    CSIR Research Space (South Africa)

    Van Niekerk, Willemien

    2015-11-01

    Full Text Available The Guidelines for Human Settlement Planning and Design, commonly known as the Red Book, is a South African publication aimed at providing practical guidance to built environment professionals in support of the creation of sustainable and vibrant...

  1. Expert validation of fit-for-purpose guidelines for designing programmes of assessment.

    NARCIS (Netherlands)

    Dijkstra, J.; Galbraith, R.; Hodges, B.D.; McAvoy, P.A.; McCrorie, P.; Southgate, L.J.; Vleuten, C.P.M. van der; Wass, V.; Schuwirth, L.W.

    2012-01-01

    ABSTRACT: BACKGROUND: An assessment programme, a purposeful mix of assessment activities, is necessary to achieve a complete picture of assessee competence. High quality assessment programmes exist, however, design requirements for such programmes are still unclear. We developed guidelines for desig

  2. A preliminary design for a satellite power system

    Science.gov (United States)

    Enriquez, Clara V.; Kokaly, Ray; Nandi, Saumya; Timmons, Mike; Garrard, Mark; Mercado, Rommel; Rogers, Brian; Ugaz, Victor

    1991-01-01

    Outlined here is a preliminary design for a Solar Power Satellite (SPS) system. The SPS will provide a clean, reliable source of energy for mass consumption. The system will use satellites in geostationary orbits around the Earth to capture the sun's energy. The intercepted sunlight will be converted to laser beam energy which can be transmitted to the Earth's surface. Ground systems on the Earth will convert the transmissions from space into electric power. The preliminary design for the SPS consists of one satellite in orbit around the Earth transmitting to one ground station. The SPs technology uses multi-layer solar cell technology arranged on a 20 sq km planar array to intercept sunlight and convert it to an electric voltage. Power conditioning devices then send the electricity to a laser, which transmits the power to the surface of the Earth. A ground station will convert the beam into electricity. Construction will take place in low Earth orbit and array sections, 20 in total, will be sailed on the solar wind out to the GEO location in 150 days. These individual transportation sections are referred to as solar sailing panels (SSAPs). The primary truss elements used to support the arrays are composed on composite tubular members in a pentahedral arrangement. Smart segments consisting of passive and active damping devices will increase the control of dynamic SPS modes.

  3. System Synthesis in Preliminary Aircraft Design Using Statistical Methods

    Science.gov (United States)

    DeLaurentis, Daniel; Mavris, Dimitri N.; Schrage, Daniel P.

    1996-01-01

    This paper documents an approach to conceptual and early preliminary aircraft design in which system synthesis is achieved using statistical methods, specifically Design of Experiments (DOE) and Response Surface Methodology (RSM). These methods are employed in order to more efficiently search the design space for optimum configurations. In particular, a methodology incorporating three uses of these techniques is presented. First, response surface equations are formed which represent aerodynamic analyses, in the form of regression polynomials, which are more sophisticated than generally available in early design stages. Next, a regression equation for an Overall Evaluation Criterion is constructed for the purpose of constrained optimization at the system level. This optimization, though achieved in an innovative way, is still traditional in that it is a point design solution. The methodology put forward here remedies this by introducing uncertainty into the problem, resulting in solutions which are probabilistic in nature. DOE/RSM is used for the third time in this setting. The process is demonstrated through a detailed aero-propulsion optimization of a High Speed Civil Transport. Fundamental goals of the methodology, then, are to introduce higher fidelity disciplinary analyses to the conceptual aircraft synthesis and provide a roadmap for transitioning from point solutions to probabilistic designs (and eventually robust ones).

  4. Preliminary design of the advanced quantum beam source

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Cheol; Lee, Jong Min; Jeong, Young Uk; Cho, Sung Oh; Yoo, Jae Gwon; Park, Seong Hee

    2000-07-01

    The preliminary design of the advanced quantum beam source based on a superconducting electron accelerator is presented. The advanced quantum beams include: high power free electron lasers, monochromatic X-rays and {gamma}-rays, high-power medium-energy electrons, high-flux pulsed neutrons, and high-flux monochromatic slow positron beam. The AQBS system is being re-designed, assuming that the SPS superconducting RF cavities used for LEP at CERN will revived as a main accelerator of the AQBS system at KAERI, after the decommissioning of LEP at the end of 2000. Technical issues of using the SPS superconducting RF cavities for the AQBS project are discussed in this report. The advanced quantum beams will be used for advanced researches in science and industries.

  5. Preliminary Design Through Graphs: A Tool for Automatic Layout Distribution

    Directory of Open Access Journals (Sweden)

    Carlo Biagini

    2015-02-01

    Full Text Available Diagrams are essential in the preliminary stages of design for understanding distributive aspects and assisting the decision-making process. By drawing a schematic graph, designers can visualize in a synthetic way the relationships between many aspects: functions and spaces, distribution of layouts, space adjacency, influence of traffic flows within a facility layout, and so on. This process can be automated through the use of modern Information and Communication Technologies tools (ICT that allow the designers to manage a large quantity of information. The work that we will present is part of an on-going research project into how modern parametric software influences decision-making on the basis of automatic and optimized layout distribution. The method involves two phases: the first aims to define the ontological relation between spaces, with particular reference to a specific building typology (rules of aggregation of spaces; the second entails the implementation of these rules through the use of specialist software. The generation of ontological relations begins with the collection of data from historical manuals and analyses of case studies. These analyses aim to generate a “relationship matrix” based on preferences of space adjacency. The phase of implementing the previously defined rules is based on the use of Grasshopper to analyse and visualize different layout configurations. The layout is generated by simulating a process involving the collision of spheres, which represents specific functions of the design program. The spheres are attracted or rejected as a function of the relationships matrix, as defined above. The layout thus obtained will remain in a sort of abstract state independent of information about the exterior form, but will still provide a useful tool for the decision-making process. In addition, preliminary results gathered through the analysis of case studies will be presented. These results provide a good variety

  6. Strategy Guideline. Modeling Enclosure Design in Above-Grade Walls

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, J. [Building Science Corporation, Westford, MA (United States); Ueno, K. [Building Science Corporation, Westford, MA (United States); Musunuru, S. [Building Science Corporation, Westford, MA (United States)

    2016-02-01

    The Strategy Guideline, written by the U.S. Department of Energy's research team Building Science Corporation, 1) describes how to model and interpret results of models for above-grade walls, and 2) analyzes the failure thresholds and criteria for above-grade walls. A library of above-grade walls with historically successful performance was used to calibrate WUFI (Wärme und Feuchte instationär) software models. The information is generalized for application to a broad population of houses within the limits of existing experience.

  7. Supporting industrial equipment development through a set of design-for-maintenance guidelines

    NARCIS (Netherlands)

    Mulder, W.; Basten, R.J.I.; Jauregui Becker, J.M.; Blok, J.; Hoekstra, S.; Kokkeler, F.G.M.; Marjanovic, Dorian; Storga, Mario; Pavkovic, Neven; Bojcetic, Nenad

    2014-01-01

    This paper presents a leaflet with design-for-maintenance guidelines. It aims at supporting developers of industrial equipment in their design-for-maintenance practices. The use of this leaflet should lead to increased attention for design-for-maintenance aspects and to improve idea generation. The

  8. Cognitive Task Analysis of Experts in Designing Multimedia Learning Object Guideline (M-LOG)

    Science.gov (United States)

    Razak, Rafiza Abdul; Palanisamy, Punithavathy

    2013-01-01

    The purpose of this study was to design and develop a set of guidelines for multimedia learning objects to inform instructional designers (IDs) about the procedures involved in the process of content analysis. This study was motivated by the absence of standardized procedures in the beginning phase of the multimedia learning object design which is…

  9. Borderless learning experiences : the development of design guidelines for collaborative distance learning environments

    NARCIS (Netherlands)

    Verdonschot, Suzanne; Kwakman, Kitty

    2004-01-01

    This study aims at the development of design guidelines that aid the educational designer in creating learning environments for collaborative learning at distance. Using a multiple case study design in which learners' experiences with distance learning environments are gathered, a theoretical model

  10. Design Guidelines for Collaboration and Participation with Examples from the LN4LD (Learning Network for Learning Design)

    NARCIS (Netherlands)

    Burgos, Daniel; Hummel, Hans; Tattersall, Colin; Brouns, Francis; Koper, Rob

    2007-01-01

    Burgos, D., Hummel, H. G. K., Tattersall, C., Brouns, F., & Koper, R. (2009). Design Guidelines for Collaboration and Participation with Examples from the LN4LD (Learning Network for Learning Design). In L. Lockyer, S. Bennett, S. Agostinho & B. Harper (Eds.), Handbook of Research on Learning Design

  11. Blade system design studies volume II : preliminary blade designs and recommended test matrix.

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Dayton A. (Global Energy Concepts, LLC, Kirkland, WA)

    2004-06-01

    As part of the U.S. Department of Energy's Wind Partnerships for Advanced Component Technologies (WindPACT) program, Global Energy Concepts, LLC is performing a Blade System Design Study (BSDS) concerning innovations in materials, processes and structural configurations for application to wind turbine blades in the multi-megawatt range. The BSDS Volume I project report addresses issues and constraints identified to scaling conventional blade designs to the megawatt size range, and evaluated candidate materials, manufacturing and design innovations for overcoming and improving large blade economics. The current report (Volume II), presents additional discussion of materials and manufacturing issues for large blades, including a summary of current trends in commercial blade manufacturing. Specifications are then developed to guide the preliminary design of MW-scale blades. Using preliminary design calculations for a 3.0 MW blade, parametric analyses are performed to quantify the potential benefits in stiffness and decreased gravity loading by replacement of a baseline fiberglass spar with carbon-fiberglass hybrid material. Complete preliminary designs are then presented for 3.0 MW and 5.0 MW blades that incorporate fiberglass-to-carbon transitions at mid-span. Based on analysis of these designs, technical issues are identified and discussed. Finally, recommendations are made for composites testing under Part I1 of the BSDS, and the initial planned test matrix for that program is presented.

  12. Human factors design guidelines for maintainability of Department of Energy nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Bongarra, J.P. Jr.; VanCott, H.P.; Pain, R.F.; Peterson, L.R.; Wallace, R.I.

    1985-06-18

    Intent of these guidelines is to provide design and design review teams of DOE nuclear facilities with human factors principles to enhance the design and aid in the inspection of DOE nuclear facilities, systems, and equipment. These guidelines are concerned with design features of DOE nuclear facilities which can potentially affect preventive and corrective maintenance of systems within DOE nuclear facilities. Maintenance includes inspecting, checking, troubleshooting, adjusting, replacing, repairing, and servicing activities. Other factors which influence maintainability such as repair and maintenance suport facilities, maintenance information, and various aspects of the environment are also addressed.

  13. Preliminary Design Study of the Hollow Electron Lens for LHC

    CERN Document Server

    Perini, Diego; CERN. Geneva. ATS Department

    2017-01-01

    A Hollow Electron Lens (HEL) has been proposed in order to improve performance of halo control and collimation in the Large Hadron Collider in view of its High Luminosity upgrade (HL-LHC). The concept is based on a beam of electrons that travels around the protons for a few meters. The electron beam is produced by a cathode and then guided by a strong magnetic field generated by a set of superconducting solenoids. The first step of the design is the definition of the magnetic fields that drive the electron trajectories. The estimation of such trajectories by means of a dedicated MATLAB® tool is presented. The influence of the main geometrical and electrical parameters are analysed and discussed. Then, the main mechanical design choices for the solenoids, cryostats gun and collector are described. The aim of this paper is to provide an overview of the preliminary design of the Electron Lens for LHC. The methods used in this study also serve as examples for future mechanical and integration designs of similar ...

  14. Ultraviolet Free Electron Laser Facility preliminary design report

    Energy Technology Data Exchange (ETDEWEB)

    Ben-Zvi, I. [ed.

    1993-02-01

    This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, but have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).

  15. Ultraviolet Free Electron Laser Facility preliminary design report

    Energy Technology Data Exchange (ETDEWEB)

    Ben-Zvi, I. (ed.)

    1993-02-01

    This document, the Preliminary Design Report (PDR) for the Brookhaven Ultraviolet Free Electron Laser (UV FEL) facility, describes all the elements of a facility proposed to meet the needs of a research community which requires ultraviolet sources not currently available as laboratory based lasers. Further, for these experiments, the requisite properties are not extant in either the existing second or upcoming third generation synchrotron light sources. This document is the result of our effort at BNL to identify potential users, determine the requirements of their experiments, and to design a facility which can not only satisfy the existing need, but have adequate flexibility for possible future extensions as need dictates and as evolving technology allows. The PDR is comprised of three volumes. In this, the first volume, background for the development of the proposal is given, including descriptions of the UV FEL facility, and representative examples of the science it was designed to perform. Discussion of the limitations and potential directions for growth are also included. A detailed description of the facility design is then provided, which addresses the accelerator, optical, and experimental systems. Information regarding the conventional construction for the facility is contained in an addendum to volume one (IA).

  16. Guidelines for sustainable building design: Recommendations from the Presidio of San Francisco energy efficiency design charrette

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.; Sartor, D.; Greenberg, S. [and others

    1996-05-01

    In 1994, the Bay Chapter of the Association of Energy Engineers{reg_sign} organized a two-day design charrette for energy-efficient redevelopment of buildings by the National Park Services (NPS) at the Presidio of San Francisco. This event brought together engineers, researchers, architects, government officials, and students in a participatory environment to apply their experience to create guidelines for the sustainable redesign of Presidio buildings. The venue for the charrette was a representative barracks building located at the Main Post of the Presidio. Examination of this building allowed for the development of design recommendations, both for the building and for the remainder of the facilities. The charrette was organized into a committee structure consisting of: steering, measurement and monitoring, modeling, building envelope and historic preservation (architectural), HVAC and controls, lighting, and presentation. Prior to the charrette itself, the modeling and measurement/monitoring committees developed substantial baseline data for the other committees during the charrette. An integrated design approach was initiated through interaction between the committees during the charrette. Later, committee reports were cross-referenced to emphasize whole building design and systems integration.

  17. Development and implementation of rotorcraft preliminary design methodology using multidisciplinary design optimization

    Science.gov (United States)

    Khalid, Adeel Syed

    Rotorcraft's evolution has lagged behind that of fixed-wing aircraft. One of the reasons for this gap is the absence of a formal methodology to accomplish a complete conceptual and preliminary design. Traditional rotorcraft methodologies are not only time consuming and expensive but also yield sub-optimal designs. Rotorcraft design is an excellent example of a multidisciplinary complex environment where several interdependent disciplines are involved. A formal framework is developed and implemented in this research for preliminary rotorcraft design using IPPD methodology. The design methodology consists of the product and process development cycles. In the product development loop, all the technical aspects of design are considered including the vehicle engineering, dynamic analysis, stability and control, aerodynamic performance, propulsion, transmission design, weight and balance, noise analysis and economic analysis. The design loop starts with a detailed analysis of requirements. A baseline is selected and upgrade targets are identified depending on the mission requirements. An Overall Evaluation Criterion (OEC) is developed that is used to measure the goodness of the design or to compare the design with competitors. The requirements analysis and baseline upgrade targets lead to the initial sizing and performance estimation of the new design. The digital information is then passed to disciplinary experts. This is where the detailed disciplinary analyses are performed. Information is transferred from one discipline to another as the design loop is iterated. To coordinate all the disciplines in the product development cycle, Multidisciplinary Design Optimization (MDO) techniques e.g. All At Once (AAO) and Collaborative Optimization (CO) are suggested. The methodology is implemented on a Light Turbine Training Helicopter (LTTH) design. Detailed disciplinary analyses are integrated through a common platform for efficient and centralized transfer of design

  18. Design guidelines for energy-efficient hotels in Nepal

    Directory of Open Access Journals (Sweden)

    Susanne Bodach

    2016-12-01

    Full Text Available It is predicted that the major increase in energy consumption and, thus, carbon emissions, will happen in the developing world. However, in most developing countries the knowledge about energy efficiency, particularly in the building sector, is quite low. Strategies developed for industrialised countries might not be suitable or must be adapted for the very different context of developing countries. This research aims to find energy-efficient and cost-effective building design options for the case of Nepal. Energy-efficient building design is a non-trivial issue involving a number of interdependent design criteria. Particularly, in composite climates, passive design strategies might conflict each other leading to an inefficient building design. This paper explores the energy conservation potential in hotel design for all bioclimatic zones of Nepal using building energy simulation with parametric analysis. Based on extensive field studies, reference models for typical hotel buildings ranging from small-scale resort hotels to large-scale multi-storey hotels were developed. These reference designs were optimised by varying design parameters such as window-to-wall ratio, glazing material, shading devices, glazing type and insulation levels. During the design optimisation, energy demand as well as cost effectiveness were evaluated. Finally, recommendations for energy-efficient and cost-effective hotel design solutions were suggested. In addition, the bioclimatic zoning for Nepal was consolidated leading to five elevation-based zones that can be used to introduce building energy regulations in the future.

  19. Preliminary design of the INPE's Solar Vector Magnetograph

    CERN Document Server

    Vieira, L E A; Lago, A Dal; Wrasse, C; Echer, E; Guarnieri, F L; Cardoso, F Reis; Guerrero, G; Costa, J Rezende; Palacios, J; Balmaceda, L; Alves, L Ribeiro; da Silva, L; Costa, L L; Sampaio, M; Soares, M C Rabello; Barbosa, M; Domingues, M; Rigozo, N; Mendes, O; Jauer, P; Dallaqua, R; Branco, R H; Stekel, T; Gonzalez, W; Kabata, W

    2016-01-01

    We describe the preliminary design of a magnetograph and visible-light imager instrument to study the solar dynamo processes through observations of the solar surface magnetic field distribution. The instrument will provide measurements of the vector magnetic field and of the line-of-sight velocity in the solar photosphere. As the magnetic field anchored at the solar surface produces most of the structures and energetic events in the upper solar atmosphere and significantly influences the heliosphere, the development of this instrument plays an important role in reaching the scientific goals of The Atmospheric and Space Science Coordination (CEA) at the Brazilian National Institute for Space Research (INPE). In particular, the CEA's space weather program will benefit most from the development of this technology. We expect that this project will be the starting point to establish a strong research program on Solar Physics in Brazil. Our main aim is acquiring progressively the know-how to build state-of-art sol...

  20. A preliminary design of the collinear dielectric wakefield accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Zholents, A.; Gai, W.; Doran, S.; Lindberg, R.; Power, J.G.; Strelnikov, N.; Sun, Y.; Trakhtenberg, E.; Vasserman, I. [ANL, Argonne, IL 60439 (United States); Jing, C.; Kanareykin, A.; Li, Y. [Euclid Techlabs LLC, Solon, OH 44139 (United States); Gao, Q. [Tsinghua University, Beijing (China); Shchegolkov, D.Y.; Simakov, E.I. [LANL, Los Alamos, NM 87545 (United States)

    2016-09-01

    A preliminary design of the multi-meter long collinear dielectric wakefield accelerator that achieves a highly efficient transfer of the drive bunch energy to the wakefields and to the witness bunch is considered. It is made from ~0.5 m long accelerator modules containing a vacuum chamber with dielectric-lined walls, a quadrupole wiggler, an rf coupler, and BPM assembly. The single bunch breakup instability is a major limiting factor for accelerator efficiency, and the BNS damping is applied to obtain the stable multi-meter long propagation of a drive bunch. Numerical simulations using a 6D particle tracking computer code are performed and tolerances to various errors are defined.

  1. The Pierre Auger Observatory Upgrade - Preliminary Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Aab, Alexander [Univ. Siegen (Germany); et al.

    2016-04-12

    The Pierre Auger Observatory has begun a major Upgrade of its already impressive capabilities, with an emphasis on improved mass composition determination using the surface detectors of the Observatory. Known as AugerPrime, the upgrade will include new 4 m2 plastic scintillator detectors on top of all 1660 water-Cherenkov detectors, updated and more flexible surface detector electronics, a large array of buried muon detectors, and an extended duty cycle for operations of the fluorescence detectors. This Preliminary Design Report was produced by the Collaboration in April 2015 as an internal document and information for funding agencies. It outlines the scientific and technical case for AugerPrime. We now release it to the public via the arXiv server. We invite you to review the large number of fundamental results already achieved by the Observatory and our plans for the future.

  2. The Pierre Auger Observatory Upgrade - Preliminary Design Report

    CERN Document Server

    Aab, A; Aglietta, M; Ahn, E J; Samarai, I Al; Albuquerque, I F M; Allekotte, I; Allison, P; Almela, A; Castillo, J Alvarez; Alvarez-Muñiz, J; Batista, R Alves; Ambrosio, M; Aminaei, A; Anchordoqui, L; Andringa, S; Aramo, C; Arqueros, F; Arsene, N; Asorey, H; Assis, P; Aublin, J; Ave, M; Avenier, M; Avila, G; Awal, N; Badescu, A M; Barber, K B; Bäuml, J; Baus, C; Beatty, J J; Becker, K H; Bellido, J A; Berat, C; Bertaina, M E; Bertou, X; Biermann, P L; Billoir, P; Blaess, S G; Blanco, A; Blanco, M; Blazek, J; Bleve, C; Blümer, H; Boháčová, M; Boncioli, D; Bonifazi, C; Borodai, N; Brack, J; Brancus, I; Bridgeman, A; Brogueira, P; Brown, W C; Buchholz, P; Bueno, A; Buitink, S; Buscemi, M; Caballero-Mora, K S; Caccianiga, B; Caccianiga, L; Candusso, M; Caramete, L; Caruso, R; Castellina, A; Cataldi, G; Cazon, L; Cester, R; Chavez, A G; Chiavassa, A; Chinellato, J A; Chudoba, J; Cilmo, M; Clay, R W; Cocciolo, G; Colalillo, R; Coleman, A; Collica, L; Coluccia, M R; Conceição, R; Contreras, F; Cooper, M J; Cordier, A; Coutu, S; Covault, C E; Cronin, J; Dallier, R; Daniel, B; Dasso, S; Daumiller, K; Dawson, B R; de Almeida, R M; de Jong, S J; De Mauro, G; Neto, J R T de Mello; De Mitri, I; de Oliveira, J; de Souza, V; del Peral, L; Deligny, O; Dembinski, H; Dhital, N; Di Giulio, C; Di Matteo, A; Diaz, J C; Castro, M L Díaz; Diogo, F; Dobrigkeit, C; Docters, W; D'Olivo, J C; Dorofeev, A; Hasankiadeh, Q Dorosti; Dova, M T; Ebr, J; Engel, R; Erdmann, M; Erfani, M; Escobar, C O; Espadanal, J; Etchegoyen, A; Falcke, H; Fang, K; Farrar, G; Fauth, A C; Fazzini, N; Ferguson, A P; Fernandes, M; Fick, B; Figueira, J M; Filevich, A; Filipčič, A; Fox, B D; Fratu, O; Freire, M M; Fuchs, B; Fujii, T; García, B; Garcia-Pinto, D; Gate, F; Gemmeke, H; Gherghel-Lascu, A; Ghia, P L; Giaccari, U; Giammarchi, M; Giller, M; Głas, D; Glaser, C; Glass, H; Golup, G; Berisso, M Gómez; Vitale, P F Gómez; González, N; Gookin, B; Gordon, J; Gorgi, A; Gorham, P; Gouffon, P; Griffith, N; Grillo, A F; Grubb, T D; Guarino, F; Guedes, G P; Hampel, M R; Hansen, P; Harari, D; Harrison, T A; Hartmann, S; Harton, J L; Haungs, A; Hebbeker, T; Heck, D; Heimann, P; Hemery, N; Herve, A E; Hill, G C; Hojvat, C; Hollon, N; Holt, E; Homola, P; Hörandel, J R; Horvath, P; Hrabovský, M; Huber, D; Huege, T; Insolia, A; Isar, P G; Jandt, I; Jansen, S; Jarne, C; Johnsen, J A; Josebachuili, M; Kääpä, A; Kambeitz, O; Kampert, K H; Kasper, P; Katkov, I; Kégl, B; Keilhauer, B; Keivani, A; Kemp, E; Kieckhafer, R M; Klages, H O; Kleifges, M; Kleinfeller, J; Krause, R; Krohm, N; Krömer, O; Kuempel, D; Mezek, G Kukec; Kunka, N; LaHurd, D; Latronico, L; Lauer, R; Lauscher, M; Lautridou, P; Coz, S Le; Lebrun, D; Lebrun, P; de Oliveira, M A Leigui; Letessier-Selvon, A; Lhenry-Yvon, I; Link, K; Lopes, L; López, R; Casado, A López; Louedec, K; Lu, L; Lucero, A; Malacari, M; Maldera, S; Mallamaci, M; Maller, J; Mandat, D; Mantsch, P; Mariazzi, A G; Marin, V; Mariş, I C; Marsella, G; Martello, D; Martin, L; Martinez, H; Bravo, O Martínez; Martraire, D; Meza, J J Masías; Mathes, H J; Mathys, S; Matthews, J; Matthews, J A J; Matthiae, G; Maurizio, D; Mayotte, E; Mazur, P O; Medina, C; Medina-Tanco, G; Meissner, R; Mello, V B B; Melo, D; Menshikov, A; Messina, S; Meyhandan, R; Micheletti, M I; Middendorf, L; Minaya, I A; Miramonti, L; Mitrica, B; Molina-Bueno, L; Mollerach, S; Montanet, F; Morello, C; Mostafá, M; Moura, C A; Muller, M A; Müller, G; Müller, S; Mussa, R; Navarra, G; Navas, S; Necesal, P; Nellen, L; Nelles, A; Neuser, J; Nguyen, P H; Niculescu-Oglinzanu, M; Niechciol, M; Niemietz, L; Niggemann, T; Nitz, D; Nosek, D; Novotny, V; Nožka, L; Ochilo, L; Oikonomou, F; Olinto, A; Pacheco, N; Selmi-Dei, D Pakk; Palatka, M; Pallotta, J; Papenbreer, P; Parente, G; Parra, A; Paul, T; Pech, M; Pȩkala, J; Pelayo, R; Pepe, I M; Perrone, L; Petermann, E; Peters, C; Petrera, S; Petrov, Y; Phuntsok, J; Piegaia, R; Pierog, T; Pieroni, P; Pimenta, M; Pirronello, V; Platino, M; Plum, M; Porcelli, A; Porowski, C; Prado, R R; Privitera, P; Prouza, M; Purrello, V; Quel, E J; Querchfeld, S; Quinn, S; Rautenberg, J; Ravel, O; Ravignani, D; Reinert, D; Revenu, B; Ridky, J; Riggi, S; Risse, M; Ristori, P; Rizi, V; de Carvalho, W Rodrigues; Fernandez, G Rodriguez; Rojo, J Rodriguez; Rodríguez-Frías, M D; Rogozin, D; Rosado, J; Roth, M; Roulet, E; Rovero, A C; Saffi, S J; Saftoiu, A; Salamida, F; Salazar, H; Saleh, A; Greus, F Salesa; Salina, G; Sánchez, F; Sanchez-Lucas, P; Santos, E; Santos, E M; Sarazin, F; Sarkar, B; Sarmento, R; Sato, R; Scarso, C; Schauer, M; Scherini, V; Schieler, H; Schmidt, D; Scholten, O; Schoorlemmer, H; Schovánek, P; Schröder, F G; Schulz, A; Schulz, J; Schumacher, J; Sciutto, S J; Segreto, A; Settimo, M; Shadkam, A; Shellard, R C; Sidelnik, I; Sigl, G; Sima, O; Śmiałkowski, A; Šmída, R; Snow, G R; Sommers, P; Sorokin, J; Squartini, R; Srivastava, Y N; Stanca, D; Stanič, S; Stapleton, J; Stasielak, J; Stephan, M; Stutz, A; Suarez, F; Suomijärvi, T; Supanitsky, A D; Sutherland, M S; Swain, J; Szadkowski, Z; Taborda, O A; Tapia, A; Tepe, A; Theodoro, V M; Timmermans, C; Peixoto, C J Todero; Toma, G; Tomankova, L; Tomé, B; Tonachini, A; Elipe, G Torralba; Machado, D Torres; Travnicek, P; Trini, M; Ulrich, R; Unger, M; Urban, M; Galicia, J F Valdés; Valiño, I; Valore, L; van Aar, G; van Bodegom, P; Berg, A M van den; van Velzen, S; van Vliet, A; Varela, E; Cárdenas, B Vargas; Varner, G; Vasquez, R; Vázquez, J R; Vázquez, R A; Veberič, D; Verzi, V; Vicha, J; Videla, M; Villaseñor, L; Vlcek, B; Vorobiov, S; Wahlberg, H; Wainberg, O; Walz, D; Watson, A A; Weber, M; Weidenhaupt, K; Weindl, A; Werner, F; Widom, A; Wiencke, L; Wilczyński, H; Winchen, T; Wittkowski, D; Wundheiler, B; Wykes, S; Yang, L; Yapici, T; Yushkov, A; Zas, E; Zavrtanik, D; Zavrtanik, M; Zepeda, A; Zhu, Y; Zimmermann, B; Ziolkowski, M; Zong, Z; Zuccarello, F

    2016-01-01

    The Pierre Auger Observatory has begun a major Upgrade of its already impressive capabilities, with an emphasis on improved mass composition determination using the surface detectors of the Observatory. Known as AugerPrime, the upgrade will include new 4 m$^2$ plastic scintillator detectors on top of all 1660 water-Cherenkov detectors, updated and more flexible surface detector electronics, a large array of buried muon detectors, and an extended duty cycle for operations of the fluorescence detectors. This Preliminary Design Report was produced by the Collaboration in April 2015 as an internal document and information for funding agencies. It outlines the scientific and technical case for AugerPrime. We now release it to the public via the arXiv server. We invite you to review the large number of fundamental results already achieved by the Observatory and our plans for the future.

  3. Preliminary design for a pierce wiggler beamstick and addendum

    Energy Technology Data Exchange (ETDEWEB)

    Pirkle, D.

    1988-05-01

    Lawrence Livermore National Laboratory is developing a fast tunable microwave source for operation at 250 GHz and 10kW peak output power. This report presents the preliminary design of a Pierce gun and solenoid magnet that will be compatible with a Pierce-wiggler electron beam formation system (beamstick). The beamstick will be an appropriate power source for a tunable gyro-BWO at 250 GHz. Figure 1 presents the major components of the Pierce-wiggler beamstick: the electron gun, solenoid, beam tunnel, wiggler, and vacuum valve. Figure 2 shows an artistic conception of how the beamstick will interface with the interaction magnet, modulator and gyro-BWO circuit at MIT. 15 figs.

  4. Preliminary design of 600 MWt HTGR-gas turbine plant

    Energy Technology Data Exchange (ETDEWEB)

    Muto, Yasushi; Miyamoto, Yoshiaki; Shiozawa, Shusaku [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    1999-07-01

    In JAERI a feasibility study of the High Temperature Gas-cooled Reactor - Gas Turbine (HTGR-GT) system has been carried out since January, 1997 as an assigned work by the Science and Technology Agency. This paper describes a result of a preliminary design for a direct cycle plant of 600 MWt carried out in 1997 fiscal year within the framework of this feasibility study. A reactor inlet gas temperature of 460degC, a reactor outlet gas temperature of 850degC and a helium gas pressure of 6 MPa were selected. A power density of 6 MW/m{sup 3} and the maximum burnup of 10{sup 5} MWD/ton were achieved. A single-shaft horizontal turbomachine of 3600 rpm was selected and placed in a turbine vessel. A net thermal efficiency of 45.7% is expected to be achieved. (author)

  5. Documentation of Calculation Program and Guideline for Optimal Window Design

    DEFF Research Database (Denmark)

    Vanhoutteghem, Lies; Svendsen, Svend

    . A user-friendly calculation program based on simple input data has recently been developed to assist engineers and architects during the process of selecting suitable windows for residential building design. The program is organised in four steps, which together represent an analysis of how windows......Windows affect energy consumption for heating and cooling of buildings and their thermal indoor environment. Standard energy calculation programs do not enable an easy comparison of different window designs, even though this is very important in the early stages of the building design process...... in a specific building design perform with regard to energy consumption, thermal indoor environment, and cost. The analyses in the steps gradually increase in level of detail and support the design decisions throughout the design process. This document presents work done to validate the program and demonstrates...

  6. THE FIQH OF THE IMAM AND CONGREGATION POSITION AS DESIGN GUIDELINES IN DESIGNING A VERTICAL MOSQUE

    Directory of Open Access Journals (Sweden)

    Muhammar Khamdevi

    2013-12-01

    Full Text Available Abstract In the books of hadeeth and fiqh, it has been narrated many instructions about the imam and congregation position, especially about the position between the imam and the congregation and about the farthest and highest distance of the last row. Suprisingly, if we look closely, these lead us to the possibility in designing a vertical mosque. That is important to address the problem of urban sprawl, where the buildings would have to be directed vertically to solve urban density and to avoid further loss of urban green space. But, is there any high restriction in the hadeeth and the fiqh? Would it be opposed to other hadeeths about the warning of vying to build a magnificent tall mosque? This paper discussed about the possibility in designing a vertical mosque in terms of islamic fiqh and architecture. The research aimed to create a design guideline for vertical mosque and to correct some misconceptions in designing a mosque. This research used a qualitative method, namely literature review. The outcome of this research is the guidelines in designing a vertical mosque. Keywords: Fiqh, Islamic Architecture, Imam and Congregation, Mosque     Abstrak Dalam buku-buku hadits dan fiqh banyak diriwayatkan petunjuk-petunjuk mengenai posisi imam dan jamaah, terutama tentang posisi antara imam dan jamaah dan tentang jarak terjauh dan tertinggi dari baris shaf terakhir. Ternyata jika dicermati, ini membawa kita kepada kemungkinan dalam merancang sebuah masjid vertikal. Hal ini sangat penting untuk menjawab masalah urban sprawl, di mana bangunan harus diarahkan secara vertikal untuk mengatasi kepadatan kota dan menghindari kehilangan lebih lanjut dari ruang terbuka hijau. Tapi, apakah ada pembatasan tingginya pada hadits dan fiqh? Apakah itu akan bertentangan dengan hadits lain mengenai peringatan berlomba membangun masjid mewah dan tinggi? Makalah  ini membahas kemungkinan dalam merancang sebuah masjid vertikal dari segi fiqh islam dan arsitektur

  7. Advanced Strategy Guideline. Air Distribution Basics and Duct Design

    Energy Technology Data Exchange (ETDEWEB)

    Arlan Burdick

    2011-12-01

    This report discusses considerations for designing an air distribution system for an energy efficient house that requires less air volume to condition the space. Considering the HVAC system early in the design process will allow adequate space for equipment and ductwork and can result in cost savings.

  8. Design guidelines and empirical evaluation tools for inland ships

    NARCIS (Netherlands)

    Rotteveel, E.; Hekkenberg, R.G.; Liu, J.

    2014-01-01

    For inland ships, state-of-the-art hull form design is to a large extent based on experience, common sense, or adjusting previous designs. The idea therefore arises that further optimization is possible if the right knowledge is available. This knowledge is insufficiently available due to two main r

  9. Healthy campus by open space design: Approaches and guidelines

    Directory of Open Access Journals (Sweden)

    Stephen Siu Yu Lau

    2014-12-01

    Full Text Available This paper examines the architectural and landscape design strategies and intentions for green, open spaces facilities targeting stress alleviation for learning environments such as those of university campuses in a compact urban setting. Literature reviews provide three prevailing perspectives for physical design pedagogical operatives: healing gardens where greenery and plants produce restorative effects; flexible spaces that accommodate functional needs of different activities; and green buildings that incorporate open space as a catalyst for integrated eco-system. Corresponding design approaches (landscape design, spatial design and green design are scrutinized by case study. A comparison of two university campuses with different urban contexts is conducted to identify challenges and opportunities for applying these design approaches. For a compact campus, high-dense surroundings may limit the size of an open space and may handicap circulation and accessibility; on the other side, a small open space may provide its users more intimate contact with natural restorative elements and also a more controllable microclimate for physical comfort. A healthy campus should encompass diverse open spaces to satisfy different purposes. Finally, a framework that integrates the three approaches is combined to produce a sustainable design rubric.

  10. Greenridge Multi-Pollutant Control Project Preliminary Public Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Connell, Daniel P

    2009-01-12

    the commercial readiness of an emissions control system that is specifically designed to meet the environmental compliance requirements of these smaller coal-fired EGUs. The multi-pollutant control system is being installed and tested on the AES Greenidge Unit 4 (Boiler 6) by a team including CONSOL Energy Inc. as prime contractor, AES Greenidge LLC as host site owner, and Babcock Power Environmental Inc. as engineering, procurement, and construction contractor. All funding for the project is being provided by the U.S. Department of Energy, through its National Energy Technology Laboratory, and by AES Greenidge. AES Greenidge Unit 4 is a 107 MW{sub e} (net), 1950s vintage, tangentially-fired, reheat unit that is representative of many of the 440 smaller coal-fired units identified above. Following design and construction, the multi-pollutant control system will be demonstrated over an approximately 20-month period while the unit fires 2-4% sulfur eastern U.S. bituminous coal and co-fires up to 10% biomass. This Preliminary Public Design Report is the first in a series of two reports describing the design of the multi-pollutant control facility that is being demonstrated at AES Greenidge. Its purpose is to consolidate for public use all available nonproprietary design information on the Greenidge Multi-Pollutant Control Project. As such, the report includes a discussion of the process concept, design objectives, design considerations, and uncertainties associated with the multi-pollutant control system and also summarizes the design of major process components and balance of plant considerations for the AES Greenidge Unit 4 installation. The Final Public Design Report, the second report in the series, will update this Preliminary Public Design Report to reflect the final, as-built design of the facility and to incorporate data on capital costs and projected operating costs.

  11. Factors controlling volume errors through 2D gully erosion assessment: guidelines for optimal survey design

    Science.gov (United States)

    Castillo, Carlos; Pérez, Rafael

    2017-04-01

    The assessment of gully erosion volumes is essential for the quantification of soil losses derived from this relevant degradation process. Traditionally, 2D and 3D approaches has been applied for this purpose (Casalí et al., 2006). Although innovative 3D approaches have recently been proposed for gully volume quantification, a renewed interest can be found in literature regarding the useful information that cross-section analysis still provides in gully erosion research. Moreover, the application of methods based on 2D approaches can be the most cost-effective approach in many situations such as preliminary studies with low accuracy requirements or surveys under time or budget constraints. The main aim of this work is to examine the key factors controlling volume error variability in 2D gully assessment by means of a stochastic experiment involving a Monte Carlo analysis over synthetic gully profiles in order to 1) contribute to a better understanding of the drivers and magnitude of gully erosion 2D-surveys uncertainty and 2) provide guidelines for optimal survey designs. Owing to the stochastic properties of error generation in 2D volume assessment, a statistical approach was followed to generate a large and significant set of gully reach configurations to evaluate quantitatively the influence of the main factors controlling the uncertainty of the volume assessment. For this purpose, a simulation algorithm in Matlab® code was written, involving the following stages: - Generation of synthetic gully area profiles with different degrees of complexity (characterized by the cross-section variability) - Simulation of field measurements characterised by a survey intensity and the precision of the measurement method - Quantification of the volume error uncertainty as a function of the key factors In this communication we will present the relationships between volume error and the studied factors and propose guidelines for 2D field surveys based on the minimal survey

  12. Advanced Strategy Guideline: Air Distribution Basics and Duct Design

    Energy Technology Data Exchange (ETDEWEB)

    Burdick, A.

    2011-12-01

    This report discusses considerations for designing an air distribution system for an energy efficient house that requires less air volume to condition the space. Considering the HVAC system early in the design process will allow adequate space for equipment and ductwork and can result in cost savings. Principles discussed that will maximize occupant comfort include delivery of the proper amount of conditioned air for appropriate temperature mixing and uniformity without drafts, minimization of system noise, the impacts of pressure loss, efficient return air duct design, and supply air outlet placement, as well as duct layout, materials, and sizing.

  13. Guidelines of the Design of Electropyrotechnic Firing Circuit for Unmanned Flight and Ground Test Projects

    Science.gov (United States)

    Gonzalez, Guillermo A.; Lucy, Melvin H.; Massie, Jeffrey J.

    2013-01-01

    The NASA Langley Research Center, Engineering Directorate, Electronic System Branch, is responsible for providing pyrotechnic support capabilities to Langley Research Center unmanned flight and ground test projects. These capabilities include device selection, procurement, testing, problem solving, firing system design, fabrication and testing; ground support equipment design, fabrication and testing; checkout procedures and procedure?s training to pyro technicians. This technical memorandum will serve as a guideline for the design, fabrication and testing of electropyrotechnic firing systems. The guidelines will discuss the entire process beginning with requirements definition and ending with development and execution.

  14. Acoustical Design Guidelines for Living Rooms for Adults with intellectual Disabilities

    NARCIS (Netherlands)

    Saher, K.

    2013-01-01

    The aim of this thesis is to investigate the effects of building design tools on acoustical quality parameters in living rooms for adults with intellectual disabilities (ID) and develop acoustical design guidelines for architects. This study is specifically concerned with the validation of auralizat

  15. User-Centered Design Guidelines for Collaborative Software for Intelligence Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Scholtz, Jean; Endert, Alexander

    2014-07-01

    In this position paper we discuss the necessity of using User-Centered Design (UCD) methods in order to design collaborative software for the intelligence community. We discuss a number of studies of collaboration in the intelligence community and use this information to provide some guidelines for collaboration software.

  16. Design and Development of the ITC Guidelines on Computer-Based and Internet-Delivered Testing

    Science.gov (United States)

    Coyne, Iain; Bartram, Dave

    2006-01-01

    This article describes the design and development of the International Test Commission's (ITC, this issue) Guidelines for Computer-Based and Internet-Delivered Testing. It examines some of the reasons why the ITC Council decided to invest in a program of research, consultation, and conferences designed to develop internationally agreed-on…

  17. Non-Speech Sound in Human-Computer Interaction: A Review and Design Guidelines.

    Science.gov (United States)

    Hereford, James; Winn, William

    1994-01-01

    Reviews research on uses of computer sound and suggests how sound might be used effectively by instructional and interface designers. Topics include principles of interface design; the perception of sound; earcons, both symbolic and iconic; sound in data analysis; sound in virtual environments; and guidelines for using sound. (70 references) (LRW)

  18. Preliminary Design of IHTS Cold Trap for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jewhan; Lee, Taeho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The main impurities in liquid sodium of the IHTS are oxygen and hydrogen. These impurities form oxides and hydrides with sodium and cause various problems. In order to eliminate the impurities the Cold Trap is installed in the loop. The life and capacity of the IHTS cold Trap depends the amount of impurities. For IHTS loop, the hydrogen has been identified as the major contamination from Steam Generator (SG) during the normal operation. In this study, the sizing of cold trap based on the source rate of hydrogen from SG from past experiences was conducted. Empirical relations among different variables were adopted to establish the temperature distribution, pressure drops, flow rates and geometries for the cold trap and its associated component. In this study, the IHTS cold trap for normal operation has been analyzed and the preliminary design of corresponding cold trap and economizer has been carried out. For further detailed design, R and D on basic sodium technology will be essential to optimize the Cold Trap.

  19. Toward best practice in Human Machine Interface design for older drivers: A review of current design guidelines.

    Science.gov (United States)

    Young, K L; Koppel, S; Charlton, J L

    2017-09-01

    Older adults are the fastest growing segment of the driving population. While there is a strong emphasis for older people to maintain their mobility, the safety of older drivers is a serious community concern. Frailty and declines in a range of age-related sensory, cognitive, and physical impairments can place older drivers at an increased risk of crash-related injuries and death. A number of studies have indicated that in-vehicle technologies such as Advanced Driver Assistance Systems (ADAS) and In-Vehicle Information Systems (IVIS) may provide assistance to older drivers. However, these technologies will only benefit older drivers if their design is congruent with the complex needs and diverse abilities of this driving cohort. The design of ADAS and IVIS is largely informed by automotive Human Machine Interface (HMI) guidelines. However, it is unclear to what extent the declining sensory, cognitive and physical capabilities of older drivers are addressed in the current guidelines. This paper provides a review of key current design guidelines for IVIS and ADAS with respect to the extent they address age-related changes in functional capacities. The review revealed that most of the HMI guidelines do not address design issues related to older driver impairments. In fact, in many guidelines driver age and sensory cognitive and physical impairments are not mentioned at all and where reference is made, it is typically very broad. Prescriptive advice on how to actually design a system so that it addresses the needs and limitations of older drivers is not provided. In order for older drivers to reap the full benefits that in-vehicle technology can afford, it is critical that further work establish how older driver limitations and capabilities can be supported by the system design process, including their inclusion into HMI design guidelines. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Design Guidelines for Classroom Multiplayer Presential Games (CMPG)

    Science.gov (United States)

    Villalta, M.; Gajardo, I.; Nussbaum, M.; Andreu, J. J.; Echeverria, A.; Plass, J. L.

    2011-01-01

    In a Classroom Multiplayer Presential Game (CMPG) peers interact collaboratively with the virtual world and amongst themselves in a shared space. The design of this kind of game, however, is a complex process that must consider instruction strategies, methodology, usability and ludic aspects. This article's aim is to develop and systematize…

  1. Guidelines for Designing a Good Web Site for ESL Students

    OpenAIRE

    KELLY, Charles I.

    2000-01-01

    This is a list of points that should be considered when designing a web site. Many of these are points that should be considered when developing any web site, some points are directed at any teacher developing educational web pages, and some points are specifically aimed at teachers of English as a Second Language.

  2. Maintenance Training Simulator Instructor Station and Student Station Design Guidelines

    Science.gov (United States)

    1988-11-01

    Positive motivation is associated with the logical, orderly arrangements of, and relationships among system controls and displays as well as ease of access...cardiovascular restriction, and fatiguing activities. Psychological Factors - Addresses user motivation as effected by workstation design. Positive ... motivation is associated with the logical, orderly arrangements of, and relationships among system controls and displays, as well as ease of access and

  3. Design guidelines for self-assessment support for adult academic distance learning

    DEFF Research Database (Denmark)

    Menendez Blanco, Maria; van der Veer, Gerrit; Benvenuti, Laura

    2011-01-01

    This contribution focuses on adult distance learning. Based on experiences at the Open University of the Netherlands we investigate specific problems that our students have with self-assessment and metacognition while studying. Starting from a literature review and complementing this with available...... student data from our teaching research center, we developed a conceptual framework that was iteratively adjusted and assessed by a questionnaire study and interviews. This allowed us to develop design guidelines for self-assessment support in distance learning environments. These guidelines were reviewed...... by experts. The input from the experts was used to modify the guidelines and iterate until they were considered complete. Tangible designs (i.e., mock-ups) for each of the self-assessment methods were proposed. These tangible designs were prototyped for later evaluation. Finally, we provide our conclusions...

  4. Summary of the Preliminary Optical ICHMI Design Study: A Preliminary Engineering Design Study for a Standpipe Viewport

    Energy Technology Data Exchange (ETDEWEB)

    Anheier, Norman C.; Qiao, Hong (Amy); Berglin, Eric J.; Hatchell, Brian K.

    2013-12-26

    This summary report examines an in-vessel optical access concept intended to support standoff optical instrumentation, control and human-machine interface (ICHMI) systems for future advanced small modular reactor (AdvSMR) applications. Optical-based measurement and sensing systems for AdvSMR applications have several key benefits over traditional instrumentation and control systems used to monitor reactor process parameters, such as temperature, flow rate, pressure, and coolant chemistry (Anheier et al. 2013). Direct and continuous visualization of the in-vessel components can be maintained using external cameras. Many optical sensing techniques can be performed remotely using open optical beam path configurations. Not only are in-vessel cables eliminated by these configurations, but also sensitive optical monitoring components (e.g., electronics, lasers, detectors, and cameras) can be placed outside the reactor vessel in the instrument vault, containment building, or other locations where temperatures and radiation levels are much lower. However, the extreme AdvSMR environment present challenges for optical access designs and optical materials. Optical access is not provided in any commercial nuclear power plant or featured in any reactor design, although successful implementation of optical access has been demonstrated in test reactors (Arkani and Gharib 2009). This report outlines the key engineering considerations for an AdvSMR optical access concept. Strict American Society of Mechanical Engineers (ASME) construction codes must be followed for any U.S. nuclear facility component (ASME 2013); however, the scope of this study is to evaluate the preliminary engineering issues for this concept, rather than developing a nuclear-qualified design. In addition, this study does not consider accident design requirements. In-vessel optical access using a standpipe viewport concept serves as a test case to explore the engineering challenges and performance requirements

  5. Design guidelines for SAR digital receiver/exciter boards.

    Energy Technology Data Exchange (ETDEWEB)

    Dudley, Peter A.

    2009-08-01

    High resolution radar systems generally require combining fast analog to digital converters and digital to analog converters with very high performance digital signal processing logic. These mixed analog and digital printed circuit boards present special challenges with respect to electromagnetic interference. This document first describes the mechanisms of interference on such boards then follows up with a discussion of prevention techniques and finally provides a checklist for designers to help avoid common mistakes.

  6. Design Guidelines for Trainer Instructor/Operator Stations.

    Science.gov (United States)

    1984-10-01

    Operating Console Training Devices Console Design 20 AUSTRAC T (Contw n, #**eor*@ side of neeeestan iEdentify 6F block numsior) The application of advanced...training program elemCnts. These data include the roles , responsibilities and functions of training devices within the total training system 21 ~5. *5 *c...used for guidance. a. Trainer Program Concept. The trainer program concept must be developed at least to the point that the role and func- tions of

  7. Preliminary Design Values, U.S., 2015, EPA/OAR/OAQPS/AQAD

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web service contains a map layer with preliminary design values for 2015. In July 2017 the 2015 design values will become official. At that time they will added...

  8. Interface design and contemporary: human creating new guidelines for high-tech products.

    Science.gov (United States)

    Pagnan, Andreia Salvan; Ribeiro, Giovana Freitas Rabelo; Gonçalves, Maria Goretti Souza; Câmara, Jairo José Drummond; Baptista, Sandra Motta

    2012-01-01

    Contemporary electronic industry offers a wide range of products. Usually touch sensitive and with few buttons and a lot of functions these products not always have a friendly interface. The human x design interface based on electronics' ergonomics is the focus of this research. An evolutionary analysis of the electronics industry design within a contemporary context clarifies this relation and proposes new guidelines for a more conscious design.

  9. Human factors design review guidelines for advanced nuclear control room technologies

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.; Brown, W. (Brookhaven National Lab., Upton, NY (United States)); Granda, T.; Baker, C. (Carlow Associates, Inc., Fairfax, VA (United States))

    1991-01-01

    Advanced control rooms (ACRs) for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering aspects of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. This paper describes the rationale, general approach, and initial development of an NRC Advanced Control Room Design Review Guideline. 20 refs., 1 fig.

  10. Design Guidelines for Collaboration and Participation with Examples from the LN4LD (Learning Network for Learning Design)

    OpenAIRE

    2007-01-01

    Burgos, D., Hummel, H. G. K., Tattersall, C., Brouns, F., & Koper, R. (2009). Design Guidelines for Collaboration and Participation with Examples from the LN4LD (Learning Network for Learning Design). In L. Lockyer, S. Bennett, S. Agostinho & B. Harper (Eds.), Handbook of Research on Learning Design and Learning Objects: Issues, Applications and Technologies (Vol. 1, pp 373-389). Hershey, New York: Information Science Reference, IGI Global.

  11. Design, integration and preliminary results of the IXV Catalysis experiment

    Science.gov (United States)

    Viladegut, Alan; Panerai, F.; Chazot, O.; Pichon, T.; Bertrand, P.; Verdy, C.; Coddet, C.

    2016-08-01

    The CATalytic Experiment (CATE) is an in-flight demonstration of catalysis effects at the surface of thermal protection materials. A high-catalytic coating was applied over the baseline ceramic material on the windward side of the intermediate experimental vehicle (IXV). The temperature jump due to different catalytic activities was detected during re-entry through measurements made with near-surface thermocouples on the windward side of the vehicle. The experiment aimed at contributing to the development and validation of gas/surface interaction models for re-entry applications. The present paper summarizes the design of CATE and its integration on the windward side of the IXV. Results of a qualification campaign at the Plasmatron facility of the von Karman Institute for Fluid Dynamics are presented. They provided an experimental evidence of the temperature jump at the low-to-high catalytic interface of the heat shield under aerothermal conditions relevant to the actual IXV flight. These tests also gave confidence so that the high-catalytic patch would not endanger the integrity of the vehicle and the safety of the mission. A preliminary assessment of flight data from the thermocouple measurements shows consistency with results of the qualification tests.

  12. Preliminary Design and Evaluation of Portable Electronic Flight Progress Strips

    Science.gov (United States)

    Doble, Nathan A.; Hansman, R. John

    2002-01-01

    There has been growing interest in using electronic alternatives to the paper Flight Progress Strip (FPS) for air traffic control. However, most research has been centered on radar-based control environments, and has not considered the unique operational needs of the airport air traffic control tower. Based on an analysis of the human factors issues for control tower Decision Support Tool (DST) interfaces, a requirement has been identified for an interaction mechanism which replicates the advantages of the paper FPS (e.g., head-up operation, portability) but also enables input and output with DSTs. An approach has been developed which uses a Portable Electronic FPS that has attributes of both a paper strip and an electronic strip. The prototype flight strip system uses Personal Digital Assistants (PDAs) to replace individual paper strips in addition to a central management interface which is displayed on a desktop computer. Each PDA is connected to the management interface via a wireless local area network. The Portable Electronic FPSs replicate the core functionality of paper flight strips and have additional features which provide a heads-up interface to a DST. A departure DST is used as a motivating example. The central management interface is used for aircraft scheduling and sequencing and provides an overview of airport departure operations. This paper will present the design of the Portable Electronic FPS system as well as preliminary evaluation results.

  13. Patient-reported outcome measure for neuromyelitis optica: pretesting of preliminary instrument and protocol for further development in accordance with international guidelines

    Science.gov (United States)

    Moore, P; Jackson, C; Mutch, K; Methley, A; Pollard, C; Hamid, S; Jacob, A

    2016-01-01

    Objective This study outlines the development of a patient-reported outcome measure (PROM), an instrument to obtain self-reported health status for neuromyeltis optica (NMO), a disabling neurological condition. Design Development was conducted in accordance with international guidance for PROMs including systematic review of existing literature, item generation guided by qualitative interviews, health-related quality of life conceptual framework and clinical expert panel and cognitive interviews with NMO patients. Setting Participants were identified through a national NMO clinic in a tertiary NHS neurosciences service. Participants 15 individuals with NMO participated in cognitive interviews requiring review and ranking of proposed PROM items and qualitative feedback on content, layout and response options. Results Participants endorsed the draft instrument as reflecting their experience of the condition and as being easy to understand. Rating and ranking of item relevance and importance reduced the draft instrument from 106 to 48 items. Participant feedback on overlapping items eliminated a further 2 items and resulted in a preliminary instrument of 46 items. As a direct result of participant feedback ordering of the 10 domains was revised, a 4 option Likert scale was employed and a 4-week recall period for impact of symptoms was selected. Conclusions A 46-item instrument developed in accordance with international PROM development guidelines through literature review, developed by subject matter experts and refined through pretesting examining content validity provides a preliminary measure for assessing patient-report of health status in NMO. Further evaluation is proposed including sensitivity to clinical change, and international contributions to evaluating the measure are encouraged. PMID:27694484

  14. GHz bandwidth noise eater hybrid optical amplifier: design guidelines.

    Science.gov (United States)

    Danion, Gwennaël; Bondu, François; Loas, Goulc'hen; Alouini, Mehdi

    2014-07-15

    This Letter describes the design of an optical amplifier system optimized to reduce the relative intensity noise (RIN) of the input signal, and discloses its performance in terms of intensity noise reduction and bandwidth, without phase noise degradation. This polarization-maintaining amplifier is composed of an erbium-doped fiber amplifier (EDFA) cascaded with a semiconductor optical amplifier (SOA). The EDFA is sized to feed the SOA with a constant power corresponding to the optimal saturation level for noise reduction, through coherent population oscillations. When properly optimized, such an amplifier provides, simultaneously, 17 dB optical gain, 5.4 dB noise factor, and 20 dB reduction of the input-RIN across a 3 GHz bandwidth, without any electronics feedback loop.

  15. Platform for dynamic tests: preliminary studies, design and construction

    Directory of Open Access Journals (Sweden)

    J. E. Campuzano

    Full Text Available This paper is about the design and construction of a platform for dynamic tests especially with people jumping, walking, etc. Initially it was tried to find out projects already implemented in platforms and dynamic tests and to study the loads produced by movement of people on slabs and the structural response to these loads. The limits established by different standards have been also studied for these dynamic responses, taking into account the ultimate limit state, as well as the structure in service, since the human body is very sensitive to structural vibrations. Parametric studies were performed considering various configurations of slabs (different spans, thicknesses and conditions of support have been done, looking for a configuration that could have natural frequency close to the frequencies of the human loads. The slab should have dimensions compatible with the available physical space, fundamental frequency below 5 Hz and maximum immediate deflection compatible with the indications of the Brazilian standard NBR6118: 2007. Based on these criteria was chosen a rectangular structure consists of a solid reinforced concrete rectangular slab studded in two opposite edges of steel beams with shear connectors type U. The other two edges are free. The steel beams supporting the slab, in turn, are supported on eight metal profiles (two in each corner of the slab that are supported on two to two short columns of steel profile H. Profiles U in steel are welded to four columns, forming a horizontal frame. Numerical analysis of the dynamic test platform have been performed for free and forced vibration, for obtaining the natural frequencies and corresponding vibration modes, considering the self-weight of the structure and the load that simulates people's weight. After obtaining a structural configuration that fulfilled the stipulated requirements, the design of the slab taking into account the recommendations of the Brazilian standard NBR6118: 2007

  16. Participatory design of a preliminary safety checklist for general practice.

    Science.gov (United States)

    Bowie, Paul; Ferguson, Julie; MacLeod, Marion; Kennedy, Susan; de Wet, Carl; McNab, Duncan; Kelly, Moya; McKay, John; Atkinson, Sarah

    2015-05-01

    The use of checklists to minimise errors is well established in high reliability, safety-critical industries. In health care there is growing interest in checklists to standardise checking processes and ensure task completion, and so provide further systemic defences against error and patient harm. However, in UK general practice there is limited experience of safety checklist use. To identify workplace hazards that impact on safety, health and wellbeing, and performance, and codesign a standardised checklist process. Application of mixed methods to identify system hazards in Scottish general practices and develop a safety checklist based on human factors design principles. A multiprofessional 'expert' group (n = 7) and experienced front-line GPs, nurses, and practice managers (n = 18) identified system hazards and developed and validated a preliminary checklist using a combination of literature review, documentation review, consensus building workshops using a mini-Delphi process, and completion of content validity index exercise. A prototype safety checklist was developed and validated consisting of six safety domains (for example, medicines management), 22 sub-categories (for example, emergency drug supplies) and 78 related items (for example, stock balancing, secure drug storage, and cold chain temperature recording). Hazards in the general practice work system were prioritised that can potentially impact on the safety, health and wellbeing of patients, GP team members, and practice performance, and a necessary safety checklist prototype was designed. However, checklist efficacy in improving safety processes and outcomes is dependent on user commitment, and support from leaders and promotional champions. Although further usability development and testing is necessary, the concept should be of interest in the UK and internationally. © British Journal of General Practice 2015.

  17. Analysis of Design Basis Events in a Preliminary Specific Design of PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwi Lim; Ha, Kwi Seok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    KAERI(Korea Atomic Energy Research Institute) has been developing a preliminary specific design of the PGSFR(Prototype Gen-IV Sodium-cooled Fast Reactor), which is a pool type sodium cooled fast reactor with a thermal power of 392.2 MW. Many alterations were made on a preliminary specific design of the PGSFR compared with a conceptual design: a heat removal capability of the DHRS was decreased, the DHXs were submerged in a cold pool, a pressure drop through the core was increased, and a shape of a redon was changed to a peanut type, etc. For identification of safety characteristics including the design changes, 5 DBE's(Design Bases Events) were analyzed using MARS-LMR code. The representative DBE's are TOP(Transient of Over Power), LOF(Loss Of Flow), LOHS(Loss Of Heat Sink), Reactor Vessel Leak and Pipe Break accidents. The representative DBE's were analyzed using the MARS-LMR code. As a result, it was identified that the PGSFR were appropriately tripped by the RPS(Reactor Protection System) and cooled by the DHRS. But a high cladding temperature was estimated in a pipe break accident. Therefore, integrity of the structure should be evaluated in the further study.

  18. Colour Size Illusion on Liquid Crystal Displays and Design Guidelines for Bioinformatics Tools

    Science.gov (United States)

    Yoo, Hyun Seung; Smith-Jackson, Tonya L.

    2011-01-01

    Although the influence of colour on size perception has been known for a century, there is only limited research on interventions that can reduce this effect. This study was therefore undertaken in order to identify appropriate interventions and propose design guidelines for information visualisation, especially in applications where size…

  19. Human factor guidelines for the design of safe in-car traffic information services.

    NARCIS (Netherlands)

    Kroon, E.C.M. Martens, M.H. Brookhuis, K.A. & Hagenzieker, M.P.

    2014-01-01

    In the 'ITS Plan the Netherlands 2013-2017' and the Dutch programme Connecting Mobility, there is the ambition to raise the valuation of human factors of ITS applications. This will make the technical applications more effective and safe. The first step is this guideline for the save design of in-ca

  20. Sustainable Design Guidelines for the Construction of New Facilities and the Renovation of Existing Structures.

    Science.gov (United States)

    Dorsey, Judy; L'Esperance, Clare

    This guide summarizes research conducted at Colorado's Poudre School District (PSD) to develop guidelines for the desired performance outcomes from employing sustainable educational facility design, and it suggests approaches for attaining them. The guide also provides case studies and references to further investigate opportunities on specific…

  1. 77 FR 25632 - Guidelines for Designating Biobased Products for Federal Procurement

    Science.gov (United States)

    2012-05-01

    ... manufactured using biobased plastic resins Component X weighs 5 pounds and is made from a resin with 40 percent... components are made from steel and the other 3 are plastic and could be manufactured using biobased plastic...; ] DEPARTMENT OF AGRICULTURE 7 CFR Part 3201 RIN 0503-AA40 Guidelines for Designating Biobased Products...

  2. Requirements Definition and Design Guidelines for Man-Machine Interface in C3 System Acquisition.

    Science.gov (United States)

    1980-06-01

    the American Society for Information Science, 1971, 22, 361-373. Uber , G. T., Williams, P. E. and Hisey, B. L. The organization and formatting of...guidelines should be examined through extended debate and in broad-ranging application before they can be adopted as a general design standard. Some rules

  3. Design Guidelines for the Development of Digital Nutrigenomics Learning Material for Heterogeneous Target Groups

    Science.gov (United States)

    Busstra, Maria C.; Hartog, Rob; Kersten, Sander; Muller, Michael

    2007-01-01

    Nutritional genomics, or nutrigenomics, can be considered as the combination of molecular nutrition and genomics. Students who attend courses in nutrigenomics differ with respect to their prior knowledge. This study describes digital nutrigenomics learning material suitable for students from various backgrounds and provides design guidelines for…

  4. Colour Size Illusion on Liquid Crystal Displays and Design Guidelines for Bioinformatics Tools

    Science.gov (United States)

    Yoo, Hyun Seung; Smith-Jackson, Tonya L.

    2011-01-01

    Although the influence of colour on size perception has been known for a century, there is only limited research on interventions that can reduce this effect. This study was therefore undertaken in order to identify appropriate interventions and propose design guidelines for information visualisation, especially in applications where size…

  5. Design guidelines for self-assessment support for adult academic distance learning

    NARCIS (Netherlands)

    Menendez Blanco, Maria; Van der Veer, Gerrit; Benvenuti, Laura; Kirschner, Paul A.

    2011-01-01

    Menendez Blanco, M., Van der Veer, G., Benvenuti, L., & Kirschner, P. A. (2011). Design guidelines for self-assessment support for adult academic distance learning. In H-J Shalin (Ed.), Constructing self-discovery learning spaces online: scaffolding and decision making technologies (pp. 169-198). He

  6. The Green Book: Planning and design guidelines for adapting South African settlement to climate change

    CSIR Research Space (South Africa)

    Van Niekerk, Cornelia W

    2016-09-01

    Full Text Available The purpose of this IDRC funded project is to the develop a set of guidelines by March 2019 – called the Green Book – to adapt existing and future South African settlements to climatic changes. The Green Book is to be used as a planning and design...

  7. Virtual reality verification of workplace design guidelines: a follow-up study

    Energy Technology Data Exchange (ETDEWEB)

    Nystad, Espen; Helgar, Stein; Droeivoldsmo, Asgeir

    2002-08-15

    Early identification of potential human factors guideline violations and corrective input into the design process are desired for efficient and cost-effective control room design. Virtual reality (VR) technology makes it possible to perform evaluation of the design of the control room at an early stage of the design process, but can we trust the results from such evaluations? This report describes the second phase of an experimental validation of a VR model with virtual verification tools against the real world in a guideline verification task. Results from the previous phase indicated that guideline verification in the VR model could be done with satisfactory accuracy for a number of evaluations. However, some guideline categories required further development of measurement tools and use of a model with higher resolution. To correct the shortcomings and utilize the knowledge from the previous experiment, a number of new features were implemented into the virtual environment used for testing. Results from the test indicate that the detailed modelling of operating panels was helpful. The addition of tools for measuring font sizes and direct illumination also proved useful. However, further refinement is needed in the usability of some of the tools. It is recommended to continue the fine-tuning of these tools, and that a test is made with a physical mockup in a real refurbishment project to get a more authentic test of the virtual verification tools.

  8. Pedagogic Design Guidelines for Multimedia Materials: A Call for Collaboration between Practitioners and Researchers

    Science.gov (United States)

    Koumi, Jack

    2013-01-01

    This paper argues that pedagogic efficacy of multimedia packages (interactive multimedia presentations) cannot be achieved by experimental research in the absence of a detailed pedagogical screenwriting framework. Following a summary of relevant literature, such a framework is offered, consisting of micro-level design guidelines. The guidelines…

  9. Keeping Kids Safe from a Design Perspective: Ethical and Legal Guidelines for Designing a Video-Based App for Children

    Science.gov (United States)

    Zydney, Janet Mannheimer; Hooper, Simon

    2015-01-01

    Educators can use video to gain invaluable information about their students. A concern is that collecting videos online can create an increased security risk for children. The purpose of this article is to provide ethical and legal guidelines for designing video-based apps for mobile devices and the web. By reviewing the literature, law, and code…

  10. Keeping Kids Safe from a Design Perspective: Ethical and Legal Guidelines for Designing a Video-Based App for Children

    Science.gov (United States)

    Zydney, Janet Mannheimer; Hooper, Simon

    2015-01-01

    Educators can use video to gain invaluable information about their students. A concern is that collecting videos online can create an increased security risk for children. The purpose of this article is to provide ethical and legal guidelines for designing video-based apps for mobile devices and the web. By reviewing the literature, law, and code…

  11. Musculoskeletal problems in Iranian hand-woven carpet industry: guidelines for workstation design.

    Science.gov (United States)

    Choobineh, Alireza; Hosseini, Mostafa; Lahmi, Mohammadali; Khani Jazani, Reza; Shahnavaz, Houshang

    2007-09-01

    Long hours of static work with awkward posture at traditionally designed looms can cause high prevalence of musculoskeletal disorders (MSDs) among carpet weavers. A comprehensive study was conducted in this industry with the objectives of determination of MSDs symptoms prevalence; identification of major factors associated with MSDs symptoms in carpet weaving occupation; and development of guidelines for weaving workstation design. In the present paper, this ergonomics study is presented. The study consisted of two phases. In the first phase, MSDs symptoms in nine Iranian provinces were surveyed by questionnaire among 1439 randomly selected weavers. Working posture and weaving workstations were ergonomically assessed as well. The results of this phase revealed that symptoms from the musculoskeletal system occurred in high rate among weavers with the prevalence significantly higher than that of the general Iranian population (Pweaving workstation. Based on the findings, some general guidelines for workstation design were presented. In the second phase, considering the general guidelines, an adjustable workstation was designed and constructed. To develop quantitative guidelines for optimizing workstation set-up, in the laboratory, nine sets of experimental conditions were tested, and working posture and weavers' perceptions were measured. The results of this lab work showed that working posture was acceptable for both the researchers and the weavers when the weaving height was adjusted 20 cm above the elbow height and a high seat with forward slope was used. By combining the results of the two phases, guidelines for weaving workstation design were presented. In this ergonomics-oriented workstation, loom is vertical. Seat, loom and weaving heights are adjustable. There is enough leg room under the loom. The seat with 10 degrees forward slope is adjusted 15 cm above the popliteal height of the weaver. Weaving height is set at 20 cm above the elbow height. It is

  12. Parametric Fuselage Geometry Generation and Aerodynamic Performance Prediction in Preliminary Rotorcraft Design

    OpenAIRE

    Kunze, Philipp

    2013-01-01

    The creation of an integrated rotorcraft conceptual and preliminary design framework at DLR involved the development of geometry and fuselage aerodynamics modules at the Institute of Aerodynamics and Flow Technology. After a short revision of the RIDE rotorcraft design environment architecture this paper focuses on the implementation of these disciplinary modules. The aim of the geometry module is to bridge the gap between conceptual and preliminary design and to allow for geometry parameter ...

  13. Inverse design-momentum, a method for the preliminary design of horizontal axis wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Battisti, L [DIMS - Department of Mechanical and Structural Engineering, University of Trento, via Mesiano, 77, 38050 Trento (Italy); Soraperra, G [TOZZI NORD wind turbines, via S. Sebastian s.n.c. 38100 Trento (Italy); Fedrizzi, R [DIMS - Department of Mechanical and Structural Engineering, University of Trento, via Mesiano, 77, 38050 Trento (Italy); Zanne, L [DIMS - Department of Mechanical and Structural Engineering, University of Trento, via Mesiano, 77, 38050 Trento (Italy)

    2007-07-15

    Wind turbine rotor prediction methods based on generalized momentum theory BEM routinely used in industry and vortex wake methods demand the use of airfoil tabulated data and geometrical specifications such as the blade spanwise chord distribution. They belong to the category of 'direct design' methods. When, on the other hand, the geometry is deduced from some design objective, we refer to 'inverse design' methods. This paper presents a method for the preliminary design of wind turbine rotors based on an inverse design approach. For this purpose, a generalized theory was developed without using classical tools such as BEM. Instead, it uses a simplified meridional flow analysis of axial turbomachines and is based on the assumption that knowing the vortex distribution and appropriate boundary conditions is tantamount to knowing the velocity distribution. The simple conservation properties of the vortex components consistently cope with the forces and specific work exchange expressions through the rotor. The method allows for rotor arbitrarily radial load distribution and includes the wake rotation and expansion. Radial pressure gradient is considered in the wake. The capability of the model is demonstrated first by a comparison with the classical actuator disk theory in investigating the consistency of the flow field, then the model is used to predict the blade planform of a commercial wind turbine. Based on these validations, the authors postulate the use of a different vortex distribution (i.e. not-uniform loading) for blade design and discuss the effect of such choices on blade chord and twist, force distribution and power coefficient. In addition to the method's straightforward application to the pre-design phase, the model clearly shows the link between blade geometry and performance allowing quick preliminary evaluation of non uniform loading on blade structural characteristics.

  14. Revised guideline for the approval procedure of package designs in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Nitsche, F. [Federal Office for Radiation Protection, Salzgitter (Germany); Roedel, R. [Federal Inst. for Materials Research and Testing, Berlin (Germany)

    2004-07-01

    The IAEA Regulations for the Safe Transport of Radioactive Material, TS-R-1 are applied in Germany through the implementation of the Dangerous Goods Transport Regulations for class 7 of the International Modal Organisations (ADR, RID, IMDG-Code, ICAO-TI). Based on this the approval procedures for packages designs applied in Germany are in compliance with the provisions of TS-R-1. The Guideline R 003 issued by the Ministry of Transport, Building and Housing (BMVBW) in 1991 is the basis for the package design approval procedures in Germany. This Guideline has been reviewed and revised to reflect latest developments in the regulations as well as in the regulatory practice. In particular it has been extended to the approval procedures of Type C packages, packages subject to transitional arrangements, special form and low dispersible radioactive material and provides more detailed information to the applicant about the requested documentation. Publication of this revised guideline has been delayed but it is expected to take place in October 2004. The paper gives an overview about the main parts and provisions of this revised Guideline R 003 with the focus on package design approval procedures.

  15. Designing usable web forms- Empirical evaluation of web form improvement guidelines

    DEFF Research Database (Denmark)

    Seckler, Mirjam; Heinz, Silvia; Bargas-Avila, Javier A.

    2014-01-01

    This study reports a controlled eye tracking experiment (N = 65) that shows the combined effectiveness of 20 guidelines to improve interactive online forms when applied to forms found on real company websites. Results indicate that improved web forms lead to faster completion times, fewer form su...... submission trials, and fewer eye movements. Data from subjective questionnaires and interviews further show increased user satisfaction. Overall, our findings highlight the importance for web designers to improve their web forms using UX guidelines.......This study reports a controlled eye tracking experiment (N = 65) that shows the combined effectiveness of 20 guidelines to improve interactive online forms when applied to forms found on real company websites. Results indicate that improved web forms lead to faster completion times, fewer form...

  16. Preliminary verification of structure design for CN HCCB TBM with 1 × 4 configuration

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zhou, E-mail: zhaozhou@swip.ac.cn; Zhou, Bing; Wang, Qijie; Cao, Qixiang; Feng, Kaiming; Wang, Xiaoyu; Zhang, Guoshu

    2016-02-15

    Highlights: • A new and simplification structural design scheme with 1 × 4 configuration is proposed for CN HCCB TBM. • The detail conceptual structural design for 1 × 4 TBM is completed. • The preliminary hydraulic analysis, thermo-hydraulic analysis and structural analysis for 1 × 4 TBM had been carried out. - Abstract: Based on the conceptual design of CN HCCB TBM with 1 × 4 configuration, the preliminary hydraulic analysis, thermo-hydraulic analysis and structural analysis had been carried out for it. Hydraulic and thermo-hydraulic analyses show that the coolant manifold system could meet the fluid design requirement preliminarily and the temperature of RAFMs structural parts, Be and Li{sub 4}SiO{sub 4} pebble beds are within the allowable range, and no zone shows a stress higher than the allowable limit in the preliminary structural analysis. These results indicate the design for CN HCCB TBM with 1 × 4 configuration is preliminary reasonable.

  17. Survey of integrative lumbar spinal stenosis treatment in Korean medicine doctors: preliminary data for clinical practice guidelines.

    Science.gov (United States)

    Lee, Yoon Jae; Shin, Joon-Shik; Lee, Jinho; Kim, Me-Riong; Ahn, Yong-Jun; Shin, Ye-Sle; Park, Ki Byung; Shin, Byung-Cheul; Lee, Myeong Soo; Kim, Joo-Hee; Cho, Jae-Heung; Ha, In-Hyuk

    2017-08-29

    Considering that large variations exist amongst practitioners in lumbar disorder management and the significant costs that lumbar disorders incur, determining clinical practice patterns to provide preliminary data for standardization should be given higher priority. Lumbar spinal stenosis (LSS) is commonly treated using integrative non-surgical methods by Korean medicine doctors (KMDs) in Korea, and this is the first study to assess current Korean medicine practice trends for LSS. A survey on KMD diagnosis, treatment, prognosis and decision-making in LSS treatment was developed in a 3-step procedure of preliminary drafting, revision based on extramural expert opinion, and final editing. The survey was conducted at the internal conference of a spine-specialty Korean medicine hospital on January 25th, 2015. The response rate was high at 79.19% (n = 118/149). Participants replied that they treated 7.3 ± 6.8 LSS patients/day using a multimodal treatment method consisting of acupuncture, pharmacopuncture, herbal medicine, Chuna manipulation, and electroacupuncture. Acupuncture mainly used Ashi points and MSAT, and pharmacopuncture mainly Shinbaro solution. The most frequently prescribed herbal medicine was Chungpa-jun, and the most commonly applied Chuna techniques were sidelying lumbar extension dysfunction correction technique, and prone lumbosacral joint distraction method. Radiological findings were mainly referred to for diagnosis, and clinical symptoms, age, radiological findings, and medical history were regarded to be important for prognosis. Participants replied that 7.8 ± 3.3 weeks were required for 50% reduction in pain, and 16.1 ± 7.7 weeks for 80% reduction. These results suggest that KMDs in Korea combine a conventional approach to LSS and a Korean medicine approach to low back pain for integration of empirical- and evidence-based diagnosis and treatment. The findings may contribute in bridging the divide between evidence and clinical practice

  18. Drain Tank Information for Developing Design Basis of the Preliminary Design

    Energy Technology Data Exchange (ETDEWEB)

    Ferrada, Juan J [ORNL

    2012-02-01

    Tokamak Cooling Water System (TCWS) drain tanks (DTs) serve two functions: normal operation and safety operation. Normal DTs are used for regular maintenance operations when draining is necessary. Safety DTs are used to receive the water leaked into the Vacuum Vessel (VV) after an in-vessel loss of coolant accident (LOCA) event. The preliminary design of the DTs shall be based on the information provided by this document. The capacity of the normal DTs is estimated based on the internal volume of in-vessel components [e.g., First Wall/Blanket (FW/BLK) and Divertor (DIV)]; Neutral Beam Injector (NBI) components; and TCWS piping, heat exchangers, electric heaters, pump casing, pressurizers, and valves. Water volumes have been updated based on 2004-design information, changes adopted because of approved Project Change Requests (PCRs), and data verification by US ITER and AREVA Federal Services, the US ITER A and E Company. Two tanks will store water from normal draining operations of the FW/BLK and DIV Primary Heat Transfer Systems (PHTSs). One tank will store water from normal draining operations of the NBI PHTS. The capacity of the safety DTs is based on analysis of a design basis accident: a large leak from in-vessel components. There are two safety DTs that will receive water from a VV LOCA event and drainage from the VV, as needed. In addition, there is one sump tank for the DIV that will be used for collecting drain water from the draining and drying processes and specifically for draining the DIV system as the DIV cassette lines are at a lower elevation than the DT connection point. Information documented in this report must be refined and verified during the preliminary design of the DTs, and there are several aspects to be considered to complete the preliminary design. Input to these design considerations is discussed in this report and includes, but is not limited to, water inventory; operating procedures/maintenance; Failure Modes and Effects Analysis (FMEA

  19. Drain Tank Information for Developing Design Basis of the Preliminary Design - R00

    Energy Technology Data Exchange (ETDEWEB)

    Ferrada, Juan J [ORNL

    2011-01-01

    Tokamak Cooling Water System (TCWS) drain tanks (DTs) serve two functions: normal operation and safety operation. Normal DTs are used for regular maintenance operations when draining is necessary. Safety DTs are used to receive the water leaked into the Vacuum Vessel (VV) after an in-vessel loss of cooling accident (LOCA) event. The preliminary design of the DTs shall be based on the information provided by this document. The capacity of the normal DTs is estimated based on the internal volume of in-vessel components [e.g., First Wall/Blanket (FW/BLK) and Divertor (DIV)], Neutral Beam Injector (NBI) components, and TCWS piping, heat exchangers, electric heaters, pump casing, pressurizers, and valves. Water volumes have been updated based on 2004 design information, changes adopted because of approved Project Change Requests (PCRs), and data verification by U.S. ITER. Two tanks will store water from normal draining operations of the FW/BLK and DIV Primary Heat Transfer Systems (PHTSs). One tank will store water from normal draining operations of the NBI PHTS. The capacity of the safety DTs is based on analysis of a design-basis accident:1 a large leak from in-vessel components. There are two safety DTs that will receive water from a VV LOCA event and drainage from the VV, as needed. In addition, there is one sump tank for the DIV that will be used for collecting drain water from the draining and drying processes and specifically for draining the DIV system as the DIV cassettes lines are at a lower elevation than the DT connection point. Information documented in this report must be refined and verified during the preliminary design of the DTs, and there are several aspects to be considered to complete the preliminary design. Input to these design considerations is discussed in this report and includes, but is not limited to, water inventory; operating procedures/maintenance; Failure Modes and Effects Analysis (FMEA); tank layout anddimensions, including design

  20. 21 CFR 320.26 - Guidelines on the design of a single-dose in vivo bioavailability or bioequivalence study.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Guidelines on the design of a single-dose in vivo... Guidelines on the design of a single-dose in vivo bioavailability or bioequivalence study. (a) Basic... least three times the half-life of the active drug ingredient or therapeutic moiety, or its metabolite(s...

  1. 21 CFR 320.27 - Guidelines on the design of a multiple-dose in vivo bioavailability study.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Guidelines on the design of a multiple-dose in... Guidelines on the design of a multiple-dose in vivo bioavailability study. (a) Basic principles. (1) In... therapeutic moiety in the body. (2) The test product and the reference material should be administered to...

  2. Design and evaluation guidelines for Department of Energy facilities subjected to natural phenomena hazards

    Energy Technology Data Exchange (ETDEWEB)

    Kennedy, R.P. (Structural Mechanics Consulting, Inc., Yorba Linda, CA (USA)); Short, S.A. (ABB Impell Corp., Mission Viejo, CA (USA)); McDonald, J.R. (Texas Tech Univ., Lubbock, TX (USA)); McCann, M.W. Jr. (Benjamin (J.R.) and Associates, Inc., Mountain View, CA (USA)); Murray, R.C. (Lawrence Livermore National Lab., CA (USA)); Hill, J.R. (USDOE Assistant Secretary for Environment, Safety, and He

    1990-06-01

    The Department of Energy (DOE) and the DOE Natural Phenomena Hazards Panel have developed uniform design and evaluation guidelines for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of the guidelines is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. The guidelines apply to both new facilities (design) and existing facilities (evaluation, modification, and upgrading). The intended audience is primarily the civil/structural or mechanical engineers conducting the design or evaluation of DOE facilities. The likelihood of occurrence of natural phenomena hazards at each DOE site has been evaluated by the DOE Natural Phenomena Hazard Program. Probabilistic hazard models are available for earthquake, extreme wind/tornado, and flood. Alternatively, site organizations are encouraged to develop site-specific hazard models utilizing the most recent information and techniques available. In this document, performance goals and natural hazard levels are expressed in probabilistic terms, and design and evaluation procedures are presented in deterministic terms. Design/evaluation procedures conform closely to common standard practices so that the procedures will be easily understood by most engineers. Performance goals are expressed in terms of structure or equipment damage to the extent that: (1) the facility cannot function; (2) the facility would need to be replaced; or (3) personnel are endangered. 82 refs., 12 figs., 18 tabs.

  3. Preliminary Design of a Pendulum Experiment for Searching for a Lorentz-Violation Signal

    CERN Document Server

    Shao, Cheng-Gang; Tan, Yu-Jie

    2016-01-01

    This work mainly presents a preliminary design for a pendulum experiment with both the source mass and the test mass in a striped pattern to amplify the Lorentz-violation signal, since the signal is sensitive to edge effects.

  4. Reducing aquatic hazards of industrial chemicals: probabilistic assessment of sustainable molecular design guidelines.

    Science.gov (United States)

    Connors, Kristin A; Voutchkova-Kostal, Adelina M; Kostal, Jakub; Anastas, Paul; Zimmerman, Julie B; Brooks, Bryan W

    2014-08-01

    Basic toxicological information is lacking for the majority of industrial chemicals. In addition to increasing empirical toxicity data through additional testing, prospective computational approaches to drug development aim to serve as a rational basis for the design of chemicals with reduced toxicity. Recent work has resulted in the derivation of a "rule of 2," wherein chemicals with an octanol-water partition coefficient (log P) less than 2 and a difference between the lowest unoccupied molecular orbital and the highest occupied molecular orbital (ΔE) greater than 9 (log P9 eV) are predicted to be 4 to 5 times less likely to elicit acute or chronic toxicity to model aquatic organisms. The present study examines potential reduction of aquatic toxicity hazards from industrial chemicals if these 2 molecular design guidelines were employed. Probabilistic hazard assessment approaches were used to model the likelihood of encountering industrial chemicals exceeding toxicological categories of concern both with and without the rule of 2. Modeling predicted that utilization of these molecular design guidelines for log P and ΔE would appreciably decrease the number of chemicals that would be designated to be of "high" and "very high" concern for acute and chronic toxicity to standard model aquatic organisms and end points as defined by the US Environmental Protection Agency. For example, 14.5% of chemicals were categorized as having high and very high acute toxicity to the fathead minnow model, whereas only 3.3% of chemicals conforming to the design guidelines were predicted to be in these categories. Considerations of specific chemical classes (e.g., aldehydes), chemical attributes (e.g., ionization), and adverse outcome pathways in representative species (e.g., receptor-mediated responses) could be used to derive future property guidelines for broader classes of contaminants.

  5. Current Mooring Design in Partner WECs and Candidates for Preliminary Analysis

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    This report is the combined report of Commercial Milestone "CM1: Design and Cost of Current Mooring Solutions of Partner WECs" and Milestone "M3: Mooring Solutions for Preliminary Analysis" of the EUDP project "Mooring Solutions for Large Wave Energy Converters". The report covers a description...... of the current mooring design of the partner Wave Energy Converter (WEC) developers in the project, together with a preliminary cost estimate of the systems....

  6. A Preliminary Rubric Design to Evaluate Mixed Methods Research

    Science.gov (United States)

    Burrows, Timothy J.

    2013-01-01

    With the increase in frequency of the use of mixed methods, both in research publications and in externally funded grants there are increasing calls for a set of standards to assess the quality of mixed methods research. The purpose of this mixed methods study was to conduct a multi-phase analysis to create a preliminary rubric to evaluate mixed…

  7. Preliminary Design Study of a Hybrid Airship for Flight Research

    Science.gov (United States)

    Browning, R. G. E.

    1981-01-01

    The feasibility of using components from four small helicopters and an airship envelope as the basis for a quad-rotor research aircraft was studied. Preliminary investigations included a review of candidate hardware and various combinations of rotor craft/airship configurations. A selected vehicle was analyzed to assess its structural and performance characteristics.

  8. A Preliminary Rubric Design to Evaluate Mixed Methods Research

    Science.gov (United States)

    Burrows, Timothy J.

    2013-01-01

    With the increase in frequency of the use of mixed methods, both in research publications and in externally funded grants there are increasing calls for a set of standards to assess the quality of mixed methods research. The purpose of this mixed methods study was to conduct a multi-phase analysis to create a preliminary rubric to evaluate mixed…

  9. Trade-off results and preliminary designs of Near-Term Hybrid Vehicles

    Science.gov (United States)

    Sandberg, J. J.

    1980-01-01

    Phase I of the Near-Term Hybrid Vehicle Program involved the development of preliminary designs of electric/heat engine hybrid passenger vehicles. The preliminary designs were developed on the basis of mission analysis, performance specification, and design trade-off studies conducted independently by four contractors. THe resulting designs involve parallel hybrid (heat engine/electric) propulsion systems with significant variation in component selection, power train layout, and control strategy. Each of the four designs is projected by its developer as having the potential to substitute electrical energy for 40% to 70% of the petroleum fuel consumed annually by its conventional counterpart.

  10. Practical Design Guidelines of qZSI Based Step-Up DC/DC Converter

    Science.gov (United States)

    Zakis, Janis; Vinnikov, Dmitri; Roasto, Indrek; Jalakas, Tanel

    2010-01-01

    This paper presents some design guidelines for a new voltage fed step-up DC/DC isolated converter. The most significant advantage of proposed converter is voltage buck-boost operation on single stage. The most promising application for proposed converter is in the field of distributed power generation e.g. fuel cells or photovoltaic. The most sensitive issues - such as power losses caused by high currents in the input side of converter and high transient overvoltages across the inverter bridge caused by stray inductances were discussed and solved. The proposals and recommendations to overcome these issues are given in the paper. The Selection and design guidelines of converter elements are proposed and explained. The prototype of proposed converter was built and experimentally tested. Some results are presented and evaluated.

  11. A knowledge-based design framework for airplane conceptual and preliminary design

    Science.gov (United States)

    Anemaat, Wilhelmus A. J.

    The goal of work described herein is to develop the second generation of Advanced Aircraft Analysis (AAA) into an object-oriented structure which can be used in different environments. One such environment is the third generation of AAA with its own user interface, the other environment with the same AAA methods (i.e. the knowledge) is the AAA-AML program. AAA-AML automates the initial airplane design process using current AAA methods in combination with AMRaven methodologies for dependency tracking and knowledge management, using the TechnoSoft Adaptive Modeling Language (AML). This will lead to the following benefits: (1) Reduced design time: computer aided design methods can reduce design and development time and replace tedious hand calculations. (2) Better product through improved design: more alternative designs can be evaluated in the same time span, which can lead to improved quality. (3) Reduced design cost: due to less training and less calculation errors substantial savings in design time and related cost can be obtained. (4) Improved Efficiency: the design engineer can avoid technically correct but irrelevant calculations on incomplete or out of sync information, particularly if the process enables robust geometry earlier. Although numerous advancements in knowledge based design have been developed for detailed design, currently no such integrated knowledge based conceptual and preliminary airplane design system exists. The third generation AAA methods are tested over a ten year period on many different airplane designs. Using AAA methods will demonstrate significant time savings. The AAA-AML system will be exercised and tested using 27 existing airplanes ranging from single engine propeller, business jets, airliners, UAV's to fighters. Data for the varied sizing methods will be compared with AAA results, to validate these methods. One new design, a Light Sport Aircraft (LSA), will be developed as an exercise to use the tool for designing a new airplane

  12. Design of a New Research Reactor: Preliminary Conceptual Design (3rd Year)

    Energy Technology Data Exchange (ETDEWEB)

    Park, Cheol; Lee, B. C.; Chae, H. T. and others

    2006-01-15

    A research reactor design is a kind of integral engineering project and a process to obtain a concrete shape through several years of concept development, conceptual design, basic design and detail design. So it requires close cooperation in various areas as well as lots of manpower and cost. The overall process at each stage may be said to be similar except for some stage-specific works. In 2005 as last year of a concept development stage, investigations on the various concepts of the fuel, reactor structure and systems which can meet the requirements established. The requirements for the process systems and I and C systems have also been embodied. The major tasks planned at the early of 2005 have been performed for each area of reactor design as follows: Establishment of the fuel and reactor core concept, and the core analysis, Preliminary thermal-hydraulic and safety analyses for the conceptual cores, Establishment and improvement of analysis system, Concept developments of the reactor structures and major systems, Test and test plan to verify the developed concepts, International cooperation to establish the foundations for exporting a research reactor.

  13. Near-term hybrid vehicle program, phase 1. Appendix C: Preliminary design data package

    Science.gov (United States)

    1979-01-01

    The design methodology, the design decision rationale, the vehicle preliminary design summary, and the advanced technology developments are presented. The detailed vehicle design, the vehicle ride and handling and front structural crashworthiness analysis, the microcomputer control of the propulsion system, the design study of the battery switching circuit, the field chopper, and the battery charger, and the recent program refinements and computer results are presented.

  14. A Fundamental Investigation into the Deformation and Failure Behavior of Heterogeneous Materials with the Aim of Developing Design Guidelines

    Science.gov (United States)

    2007-11-02

    phenomenologically. The big question is the following: how does one translate this into design guidelines for use by practicing engineers ? In...experimentally, rather than deduced from constituent properties.” In guidelines developed for use of composites in engineering applications, such as the...homogenized properties significantly. Furthermore, micromechanics models are inherently nonunique in the sense that more than one assumed micromechanical

  15. Towards computerizing intensive care sedation guidelines: design of a rule-based architecture for automated execution of clinical guidelines

    Directory of Open Access Journals (Sweden)

    Kerckhove Wannes

    2010-01-01

    Full Text Available Abstract Background Computerized ICUs rely on software services to convey the medical condition of their patients as well as assisting the staff in taking treatment decisions. Such services are useful for following clinical guidelines quickly and accurately. However, the development of services is often time-consuming and error-prone. Consequently, many care-related activities are still conducted based on manually constructed guidelines. These are often ambiguous, which leads to unnecessary variations in treatments and costs. The goal of this paper is to present a semi-automatic verification and translation framework capable of turning manually constructed diagrams into ready-to-use programs. This framework combines the strengths of the manual and service-oriented approaches while decreasing their disadvantages. The aim is to close the gap in communication between the IT and the medical domain. This leads to a less time-consuming and error-prone development phase and a shorter clinical evaluation phase. Methods A framework is proposed that semi-automatically translates a clinical guideline, expressed as an XML-based flow chart, into a Drools Rule Flow by employing semantic technologies such as ontologies and SWRL. An overview of the architecture is given and all the technology choices are thoroughly motivated. Finally, it is shown how this framework can be integrated into a service-oriented architecture (SOA. Results The applicability of the Drools Rule language to express clinical guidelines is evaluated by translating an example guideline, namely the sedation protocol used for the anaesthetization of patients, to a Drools Rule Flow and executing and deploying this Rule-based application as a part of a SOA. The results show that the performance of Drools is comparable to other technologies such as Web Services and increases with the number of decision nodes present in the Rule Flow. Most delays are introduced by loading the Rule Flows

  16. Speaker-Oriented Classroom Acoustics Design Guidelines in the Context of Current Regulations in European Countries

    DEFF Research Database (Denmark)

    Pelegrin Garcia, David; Brunskog, Jonas; Rasmussen, Birgit

    2014-01-01

    experienced at work. With the aim of improving working conditions for teachers, this article presents guidelines for classroom acoustics design that meet simultaneously criteria of vocal comfort and speech intelligibility, which may be of use in future discussions for updating regulatory requirements...... in classroom acoustics. Two room acoustic parameters are shown relevant for a speaker: the voice support, linked to vocal effort, and the decay time derived from an oral-binaural impulse response, linked to vocal comfort. Theoretical prediction models for room-averaged values of these parameters are combined...... with a model of speech intelligibility based on the useful-to-detrimental ratio and empirical models of signal-to-noise ratio in classrooms in order to derive classroom acoustic guidelines, taking into account physical volume restrictions linked to the number of students present in a classroom. The recommended...

  17. Human-system interface design review guideline: The development of draft revision 1 to NUREG-0700

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.; Stubler, W.; Brown, W. [Brookhaven National Lab., Upton, NY (United States)] [and others

    1996-03-01

    Advanced human-system interface (HSI) technologies are being developed in the commercial nuclear power industry. These HSIs may have significant implications for plant safety in that they will affect the ways in which the operator interacts with and supervises an increasingly complex system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of nuclear plants to ensure that operator performance and reliability are supported. The NRC is developing guidance to support its review of these advanced designs. The guidance consists of an evaluation methodology and an extensive set of human factors guidelines which are used in one aspect of the evaluation. The paper describes the guidance development of the evaluation methodology and the guidelines.

  18. Preliminary design of a satellite observation system for Space Station Freedom

    Science.gov (United States)

    Cabe, Greg (Editor); Gallagher, Chris; Wilson, Brian; Rehfeld, James; Maurer, Alexa; Stern, Dan; Nualart, Jaime; Le, Xuan-Trang

    1992-01-01

    Degobah Satellite Systems (DSS), in cooperation with the University Space Research Association (USRA), NASA - Johnson Space Center (JSC), and the University of Texas, has completed the preliminary design of a satellite system to provide inexpensive on-demand video images of all or any portion of Space Station Freedom (SSF). DSS has narrowed the scope of the project to complement the work done by Mr. Dennis Wells at Johnson Space Center. This three month project has resulted in completion of the preliminary design of AERCAM, the Autonomous Extravehicular Robotic Camera, detailed in this design report. This report begins by providing information on the project background, describing the mission objectives, constraints, and assumptions. Preliminary designs for the primary concept and satellite subsystems are then discussed in detail. Included in the technical portion of the report are detailed descriptions of an advanced imaging system and docking and safing systems that ensure compatibility with the SSF. The report concludes by describing management procedures and project costs.

  19. Passive solar design strategies: Remodeling guidelines for conserving energy at home. [Final report

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    The idea of passive solar is simple, but applying it effectively does require information and attention to the details of design and construction. Some passive solar techniques are modest and low-cost, and require only small changes in remodeler`s typical practice. At the other end of the spectrum, some passive solar systems can almost eliminate a house`s need for purchased heating (and in some cases, cooling) energy -- but probably at a relatively high first cost. In between are a broad range of energy-conserving passive solar techniques. Whether or not they are cost-effective, practical and attractive enough to offer a market advantage to any individual remodeler depends on very specific factors such as local costs, climate, and market characteristics. Passive solar design strategies: Remodeling Guidelines For Conserving Energy At Homes is written to help give remodelers the information they need to make these decisions. Passive Solar Design Strategies is a package in three basic parts: The Guidelines contain information about passive solar techniques and how they work, and provides specific examples of systems which will save various percentages of energy; The Worksheets offer a simple, fill-in-the-blank method to pre-evaluate the performance of a specific design; The Worked Example demonstrates how to complete the worksheets for a typical residence.

  20. Passive solar design strategies: Remodeling guidelines for conserving energy at home

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The idea of passive solar is simple, but applying it effectively does require information and attention to the details of design and construction. Some passive solar techniques are modest and low-cost, and require only small changes in remodeler's typical practice. At the other end of the spectrum, some passive solar systems can almost eliminate a house's need for purchased heating (and in some cases, cooling) energy -- but probably at a relatively high first cost. In between are a broad range of energy-conserving passive solar techniques. Whether or not they are cost-effective, practical and attractive enough to offer a market advantage to any individual remodeler depends on very specific factors such as local costs, climate, and market characteristics. Passive solar design strategies: Remodeling Guidelines For Conserving Energy At Homes is written to help give remodelers the information they need to make these decisions. Passive Solar Design Strategies is a package in three basic parts: The Guidelines contain information about passive solar techniques and how they work, and provides specific examples of systems which will save various percentages of energy; The Worksheets offer a simple, fill-in-the-blank method to pre-evaluate the performance of a specific design; The Worked Example demonstrates how to complete the worksheets for a typical residence.

  1. Design and implementation of speed humps: supplement to national guidelines for traffic calming

    CSIR Research Space (South Africa)

    Emslie, I

    1997-03-01

    Full Text Available This report presents guidelines to assist local authorities and traffic engineers with a uniform approach to the implementation of speed humps. It is recommended that these guidelines be read in conjunction with The National Guidelines for Traffic...

  2. Preliminary design report for the K basins integrated water treatment system

    Energy Technology Data Exchange (ETDEWEB)

    Pauly, T.R., Westinghouse Hanford

    1996-08-12

    This Preliminary Design Report (PDR) provides a revised concept for the K Basins Integrated Water Treatment Systems (IWTS). This PDR incorporates the 11 recommendations made in a May 1996 Value Engineering session into the Conceptual Design, and provides new flow diagrams, hazard category assessment, cost estimate, and schedule for the IWTS Subproject.

  3. A Preliminary Study on Gender Differences in Studying Systems Analysis and Design

    Science.gov (United States)

    Lee, Fion S. L.; Wong, Kelvin C. K.

    2017-01-01

    Systems analysis and design is a crucial task in system development and is included in a typical information systems programme as a core course. This paper presented a preliminary study on gender differences in studying a systems analysis and design course of an undergraduate programme. Results indicated that male students outperformed female…

  4. Preliminary report on the design of the Superconducting Super Collider

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-01-01

    While a rather detailed Conceptual Design Report will be available in April, an Superconducting Super Collider (SSC) it is appropriate to give a preview, now that the primary parameters for the Conceptual Design Report have been put down. In this preview the leading two chapters give the historical and scientific-technical background for the SSC and deal at somelength with the physics issues to be explored by the SSC. A third chapter reviews briefly the engineering and accelerator physics foundations for the developing SSC design, while the fourth lists the primary design parameters and describes the overall design. The fifth chapter describes briefly the principal engineering systems that will appear in the Conceptual Design Report, including the rather extensive injector system required. A sixth and final chapter outlines the beginnings of a ``construction plan`` put together for the purposes of exploring practical schedules and defining the critical design, development and planning paths for the overall facility and its major sub-systems.

  5. Design and preliminary test results of Daya Bay RPC modules*

    Energy Technology Data Exchange (ETDEWEB)

    Hackenburg, R.

    2011-09-01

    Resistive Plate Chamber (RPC) modules will be used as one part of the cosmic muon veto system in the Daya Bay reactor neutrino experiment. A total of 189 RPC modules will cover the three water pools in the experiment. To achieve track reconstruction and high efficiency, each module consists of 4 layers, each of which contains two sizes of bare chambers. The placement of bare chambers is reversed in different layers to reduce the overlapping dead areas. The module efficiency and patch efficiency were studied both in simulation and test of the data analysis. 143 modules have been constructed and tested. The preliminary study shows that the module and patch 3 out of 4 layers efficiency reaches about 98%.

  6. Design and preliminary test results of Daya Bay RPC modules

    Institute of Scientific and Technical Information of China (English)

    XU Ji-Lei; Logan Lebanowski; Cullen Newsom; Lin Shih-Kai; Jonathan Link; MA Lie-Hua; Viktor Pě(c); Vit Vorobel; CHEN Jin; LIU Jin-Chang; ZHOU Yong-Zhao; GUAN Meng-Yun; LIANG Hao; YANG Chang-Gen; WANG Yi-Fang; ZHANG Jia-Wen; LU Chang-Guo; Kirk McDonald; Robert Hackenburg; Kwong Lau

    2011-01-01

    Resistive Plate Chamber(RPC)modules will be used as one part of the cosmic muon veto system in the Days Bay reactor neutrino experiment.A total of 189 RPC modules will cover the three water pools in the experiment.To achieve track reconstruction and high efficiency,each module consists of 4 layers,each of which contains two sizes of bare chambers.The placement of bare chambers is reversed in different layers to reduce the overlapping dead areas.The module efficiency and patch efficiency were studied both in simulation and test of the data analysis.143 modules have been constructed and tested.The preliminary study shows that the module and patch 3 out of 4 layers efficiency reaches about 98%.

  7. User Interface Design, Standards & Guidelines for Web Applications Based on Human Personality Types

    Directory of Open Access Journals (Sweden)

    Kasthuri Subaramaniam

    2011-01-01

    Full Text Available This paper discusses the standards and guidelines of user interface features in web-based applications for the different personality types of people. An overview of human computer interaction and human  personality types is described. LEONARD, Let’s Explore our personality type based on Openness (O, Neutral (N, Analytical (A, Relational (R and Decisive (D is the model used to determine the different personality types for this study. The purpose is to define user personality profiles and to establish guidelines for the graphical user interface. The personality inventory and a user interface questionnaire were administered to university students. Interview sessions were also conducted and parts of the interviews with the university students were used to validate the results obtained from the questionnaires. The analysis of the students' personality types identified five main groups. The results suggest that users do have definable expectations concerning the features of web applications. This profile served as basis for the guidelines of web features for the graphical user interface design for the particular user groups.

  8. Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1979-01-01

    This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailed subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)

  9. System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

    Science.gov (United States)

    Lawton, R. M.

    1996-01-01

    Demonstration of required safety margins on critical electrical/electronic circuits in large complex systems has become an implementation and cost problem. These margins are the difference between the activation level of the circuit and the electrical noise on the circuit in the actual operating environment. This document discusses the origin of the requirement and gives a detailed process flow for the identification of the system electromagnetic compatibility (EMC) critical circuit list. The process flow discusses the roles of engineering disciplines such as systems engineering, safety, and EMC. Design and analysis guidelines are provided to assist the designer in assuring the system design has a high probability of meeting the margin requirements. Examples of approaches used on actual programs (Skylab and Space Shuttle Solid Rocket Booster) are provided to show how variations of the approach can be used successfully.

  10. Relationship between energy systems and landscapes. Guidelines and tools for design and management

    Directory of Open Access Journals (Sweden)

    Elisabetta Ginelli

    2014-10-01

    Full Text Available Landscapes undergoing conservation, valorisation, management and reconstruction policies, become a fundamental factor for the local/global development of natural, cultural, human and social potentials of territories. With the contribution of technological design culture, the research, having a strong multidisciplinary character, focuses on managing the relationship between energy systems and landscapes with the general aim of subverting and transforming apparent conflicts in synergies, in order to overcome a sectorial and segmented approach barely based on energy performances. Through the introduction of a complex multidimensional methodology of analysis and evaluation the goal of this work, is to develop standards of acceptability, meta-design criteria and guidelines for design, intro- ducing a methodology for multidimen- sional complex analysis and evaluation, to support Public Authorities.

  11. Development of display design and command usage guidelines for Spacelab experiment computer applications

    Science.gov (United States)

    Dodson, D. W.; Shields, N. L., Jr.

    1979-01-01

    Individual Spacelab experiments are responsible for developing their CRT display formats and interactive command scenarios for payload crew monitoring and control of experiment operations via the Spacelab Data Display System (DDS). In order to enhance crew training and flight operations, it was important to establish some standardization of the crew/experiment interface among different experiments by providing standard methods and techniques for data presentation and experiment commanding via the DDS. In order to establish optimum usage guidelines for the Spacelab DDS, the capabilities and limitations of the hardware and Experiment Computer Operating System design had to be considered. Since the operating system software and hardware design had already been established, the Display and Command Usage Guidelines were constrained to the capabilities of the existing system design. Empirical evaluations were conducted on a DDS simulator to determine optimum operator/system interface utilization of the system capabilities. Display parameters such as information location, display density, data organization, status presentation and dynamic update effects were evaluated in terms of response times and error rates.

  12. Guidelines for conceptual design and evaluation of aquifer thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, C.F.; Hauz, W.

    1980-10-01

    Guidelines are presented for use as a tool by those considering application of a new technology, aquifer thermal energy storage (ATES). The guidelines will assist utilities, municipalities, industries, and other entities in the conceptual design and evaluation of systems employing ATES. The potential benefits of ATES are described, an overview is presented of the technology and its applications, and rules of thumb are provided for quickly judging whether a proposed project has sufficient promise to warrant detailed conceptual design and evaluation. The characteristics of sources and end uses of heat and chill which are seasonally mismatched and may benefit from ATES (industrial waste heat, cogeneration, solar heat, and winter chill, for space heating and air conditioning) are discussed. Storage and transport subsystems and their expected performance and cost are described. A 10-step methodology is presented for conceptual design of an ATES system and evaluation of its technical and economic feasibility in terms of energy conservation, cost savings, fuel substitution, improved dependability of supply, and abatement of pollution, with examples, and the methodology is applied to a hypothetical proposed ATES system, to illustrate its use.

  13. Some Design-Objectives and Design-Guidelines for Automotive Friction Clutch Based on Clutch Engagement Dynamics

    Science.gov (United States)

    Tripathi, K.

    2014-01-01

    Dynamics of the driveline and the vehicle during clutch engagement is a complex phenomenon. Time domain analysis of different state variables is performed through numerical solution of sixth-order driveline model using an indigenous computer program. The study revealed that different design objectives like driver and passenger comfort, smoothness of engagement, wear of friction surfaces, power loss, and heat generation are in mutual conflict, with respect to the sub-ranges of operational parameters. The overall outcome of this study is presented in the form of a matrix, relating the sub-ranges of operational parameters with engagement quality parameters, which may be used as a guideline for clutch design for different design objectives. The engagement quality parameters may also be used for building a cost function for overall optimization of clutch.

  14. Beyond the castle:public space co-design, a case study and guidelines for designers

    OpenAIRE

    Cruickshank, Leon; Coupe, Gemma; Hennesy, Dee

    2013-01-01

    In this paper we describe a high profile project to reimagine a large green space in the heart of the city of Lancaster in the UK. This co-design project involved professional designers but also 2500 people with 700 of these making an active co-design contribution. This project forms the basis of a discussion of how we used a series of events to help participants reach their full creative co-design potential moving from doing to creating levels of creativity. From this case study we go on to ...

  15. Preliminary safety analysis for key design features of KALIMER

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, D. H.; Kwon, Y. M.; Chang, W. P.; Suk, S. D.; Lee, S. O.; Lee, Y. B.; Jeong, K. S

    2000-07-01

    KAERI is currently developing the conceptual design of a liquid metal reactor, KALIMER(Korea Advanced Liquid Metal Reactor) under the long-term nuclear R and D program. In this report, descriptions of the KALIMER safety design features and safety analyses results for selected ATWS accidents are presented. First, the basic approach to achieve the safety goal is introduced in chapter 1, and the safety evaluation procedure for the KALIMER design is described in chapter 2. It includes event selection, event categorization, description of design basis events, and beyond design basis events. In chapter 3, results of inherent safety evaluations for the KALIMER conceptual design are presented. The KALIMER core and plant system are designed to assure design performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated anticipated transient without scram(ATWS) have been performed to investigate the KALIMER system response to the events. They are categorized as bounding events(BEs) because of their low probability of occurrence. In chapter 4, the design of the KALIMER containment dome and the results of its performance analysis are presented. The designs of the existing LMR containment and the KALIMER containment dome have been compared in this chapter. Procedure of the containment performance analysis and the analysis results are described along with the accident scenario and source terms. Finally, a simple methodology is introduced to investigate the core kinetics and hydraulic behavior during HCDA in chapter 5. Mathematical formulations have been developed in the framework of the modified bethe-tait method, and scoping analyses have been performed for the KALIMER core behavior during super-prompt critical excursions.

  16. Design guidelines for PWR pressurizer safety and relief valve discharge piping to minimize potential operating and piping qualification problems

    Energy Technology Data Exchange (ETDEWEB)

    Adams, T.M.; Chang, K.C.; Campbell, T.E.

    1982-01-01

    General system design considerations such as functional requirements, valve types and operation, and various loading conditions are discussed. General guidelines for the piping layout, support design, and embedment selection are presented and discussed. Also presented and discussed are potential system operating problems which can arise from an improper design. 3 refs.

  17. Rotorcraft pilot coupling susceptibility accompanying handling qualities prospects in preliminary rotorcraft design.

    OpenAIRE

    Yilmaz, D; Dang Vu, B.; M. Jones

    2012-01-01

    Due to expensive and risky Rotorcraft-Pilot Couplings (RPC) that can develop during flight testing phases of any new prototype aircraft, it is beneficial to crosscheck the RPC susceptibility of the vehicle as early as possible during the design process. One of the objectives of the European project ARISTOTEL (2010-2013) is to provide guidelines to designers and simulator programs to reveal RPC aspects of the vehicle to be designed. First, a methodology to assess the sensitivity of Handling Qu...

  18. Human-system interface design review guideline -- Reviewer`s checklist: Final report. Revision 1, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant`s HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 2 is a complete set of the guidelines contained in Volume 1, Part 2, but in a checklist format that can be used by reviewers to assemble sets of individual guidelines for use in specific design reviews. The checklist provides space for reviewers to enter guidelines evaluations and comments.

  19. Preliminary Design and Analysis of ITER In-Wall Shielding

    Institute of Scientific and Technical Information of China (English)

    LIU Changle; YU Jie; WU Songtao; CAI Yingxiang; PAN Wanjiang

    2007-01-01

    ITER in-wall shielding (IIS) is situated between the doubled shells of the ITER Vacuum Vessel (IVV). Its main functions are applied in shielding neutron, gamma-ray and toroidal field ripple reduction. The structure of IIS has been modelled according to the IVV design criteria which has been updated by the ITER team (IT). Static analysis and thermal expansion analysis were performed for the structure. Thermal-hydraulic analysis verified the heat removal capability and resulting temperature, pressure, and velocity changes in the coolant flow. Consequently, our design work is possibly suitable as a reference for IT's updated or final design in its next step.

  20. Preliminary design and optimization of slotted tube grain for solid rocket motor

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In this paper,design and optimization technique of slotted tube grain for solid rocket motors has been discussed.In doing so,the design objectives and constraints have been set,geometric parameters identified,performance prediction parameters calculated,thereafter preliminary designs completed and finally optimal design reached.Geometric model for slotted tube grain configuration has been developed.Average thrust has been taken as the objective function with constraints of burning time,mass of propellant,fixed length and diameter of chamber case.Lumped parameter method has been used for calculating the performance prediction parameters.A set of preliminary designs has been completed and an analysis of these results conducted.Although all the preliminary results fulfill the design requirements in terms of objective function and constraints,however in order tO attain the optimal design,Sequen-tial quadratic programming optimization technique has been adopted.As the slotted tube grain ge-ometry is totally dependent upon various independent variables and each of these variables has a bearing on explicit characteristic of grain designing,hence affects of the independent variables on performance parameters have been examined,thus variation laws have been developed.Basing on the variation laws and the analysis of preliminary design results,upper and lower limits have been defined for the independent geometric variables and an initial guess provided for conducting optimi-zation.Resuhs attained exhibits that an optimal result has been attained and the value of objective function has been maximized.All the design constraint limits have also been met while ensuring sound values of volumetric loading fraction,web fraction and neutrality.This methodology of design and optimization of slotted tube grain for solid rocket motors can be used by engineers as a reference guide for actual design and engineering purposes.

  1. Preliminary design of an energy storing orthosis for providing gait to people with spinal cord injury.

    Science.gov (United States)

    Boughner, Kyle J; Durfee, William K

    2014-01-01

    A new design is proposed for an energy storing orthosis (ESO) that restores walking to people with spinal cord injury by combining functional electrical stimulation of the quadriceps muscle with a mechanical brace that uses elastic elements to store and transfer energy between hip and knee joints. The new ESO is a variation of a previous design and uses constant force springs for energy storage. Based on the detailed design and on dynamic simulations, the concept has demonstrated preliminary technical feasibility.

  2. Preliminary Design of an Automated White Board Cleaner

    African Journals Online (AJOL)

    Toshiba

    An International Multidisciplinary Journal, Ethiopia. Vol. 8 (2), Serial No. ... The mechanism of the automated board cleaner entails a horizontal motion. The design is aimed ..... The production cost of chains is relatively high. (ii) The chain drive.

  3. Preliminary of Optical Lens Design for Micro-Satellite

    Science.gov (United States)

    Rachim, Elvira; Mukhtar Tahir, Andi; Herawan, Agus

    2017-01-01

    The development of micro satellites for the last two decades is emerging rapidly as the need of satellite communication usage is increasing. Earth observation is one of the example of how satellites are on demand. Most observation satellites consist of sensors and imaging system on-board. One of the key element to have a good imaging system is a special optical lens system design. Such lens is designed specifically by calculating every parameter such as refractive, reflective indexes, type of surface, distance and many more. Manufactured lenses sometimes do not match the requirement of an imager system hence the special lens design is needed. This paper will first briefly describe the history of optic, theory related to lens system, then the design and the analysis of lens system for micro-satellites generally and LAPAN A4 particularly.

  4. Design guidelines for the use of audio cues in computer interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Sumikawa, D.A.; Blattner, M.M.; Joy, K.I.; Greenberg, R.M.

    1985-07-01

    A logical next step in the evolution of the computer-user interface is the incorporation of sound thereby using our senses of ''hearing'' in our communication with the computer. This allows our visual and auditory capacities to work in unison leading to a more effective and efficient interpretation of information received from the computer than by sight alone. In this paper we examine earcons, which are audio cues, used in the computer-user interface to provide information and feedback to the user about computer entities (these include messages and functions, as well as states and labels). The material in this paper is part of a larger study that recommends guidelines for the design and use of audio cues in the computer-user interface. The complete work examines the disciplines of music, psychology, communication theory, advertising, and psychoacoustics to discover how sound is utilized and analyzed in those areas. The resulting information is organized according to the theory of semiotics, the theory of signs, into the syntax, semantics, and pragmatics of communication by sound. Here we present design guidelines for the syntax of earcons. Earcons are constructed from motives, short sequences of notes with a specific rhythm and pitch, embellished by timbre, dynamics, and register. Compound earcons and family earcons are introduced. These are related motives that serve to identify a family of related cues. Examples of earcons are given.

  5. Development of guidelines for improved hydraulic design of waste stabilisation ponds.

    Science.gov (United States)

    Shilton, A; Harrison, J

    2003-01-01

    Pond hydraulic behaviour is influenced by the inlet/outlet configuration, baffles and wind, but design information relating to these factors is still very limited. This paper reviews the development of "Guidelines for the Improved Hydraulic Design of Waste Stabilisation Ponds" and summarises some of the key findings and recommendations. This work was based on review of previous research, laboratory experimentation, field studies and mathematical modelling using computational fluid dynamics. The inlet design can have a significant influence on the flow regime in a pond. Poorly considered positioning of the inlet and the outlet can create hydraulic short-circuiting problems. As an example of the nature of the work undertaken in this project, the use of a small horizontal inlet pipe was compared against a vertical inlet design. A practical method of assessing the relative significance of wind versus inlet power input was presented. The application of this analysis may allow engineers to size inlet pipes to help control the flow patterns in ponds for efficient performance. Extensive testing has been undertaken on a wide range of baffle configurations. An example of this research showed how short stub baffles could provide similar improvements to longer "traditional" baffle designs, potentially offering significant savings in construction costs. For traditional baffle designs a minimum of two baffles is recommended. For the pond modelled in this work, it was found that any more than four baffles gave only marginal improvements.

  6. Guidelines for designing 2D and 3D plasmonic stub resonators

    CERN Document Server

    Naghizadeh, Solmaz

    2016-01-01

    In this work we compare the performance of plasmonic waveguide integrated stub resonators based on 2D metal-dielectric-metal (MDM) and 3D slot-waveguide (SWG) geometries. We show that scattering matrix theory can be extended to 3D devices, and by employing scattering matrix theory we provide the guidelines for designing plasmonic 2D and 3D single-stub and double-stub resonators with a desired spectral response at the design wavelength. We provide transmission maps of 2D and 3D double-stub resonators versus stub lengths, and we specify the different regions on these maps that result in a minimum, a maximum or a plasmonically induced transparency (PIT) shape in the transmission spectrum. Radiation loss from waveguide terminations leads to a degradation of the 3D slot-waveguide based resonators. We illustrate improved waveguide terminations that boost resonator properties. We verify our results with 3D FDTD simulations.

  7. Specificity of Methylation Assays in Cancer Research: A Guideline for Designing Primers and Probes

    Directory of Open Access Journals (Sweden)

    Zeinab Barekati

    2010-01-01

    Full Text Available DNA methylation is an epigenetic regulation mechanism of genomic function, and aberrant methylation pattern has been found to be a common event in many diseases and human cancers. A large number of cancer studies have been focused on identification of methylation changes as biomarkers (i.e., breast cancer. However, still clinical use of them is very limited because of lack of specificity and sensitivity for diagnostic test. This highlights the critical need for specific primer and probe design to avoid false-positive detection of methylation profiling. The guideline and online web tools that are introduced in this paper might help to perform a successful experiment and to develop specific diagnosis biomarkers by designing right primer pair and probe prior to experimental step.

  8. Bridging Theory and Practice: Developing Guidelines to Facilitate the Design of Computer-based Learning Environments

    Directory of Open Access Journals (Sweden)

    Lisa D. Young

    2003-10-01

    Full Text Available Abstract. The design of computer-based learning environments has undergone a paradigm shift; moving students away from instruction that was considered to promote technical rationality grounded in objectivism, to the application of computers to create cognitive tools utilized in constructivist environments. The goal of the resulting computer-based learning environment design principles is to have students learn with technology, rather than from technology. This paper reviews the general constructivist theory that has guided the development of these environments, and offers suggestions for the adaptation of modest, generic guidelines, not mandated principles, that can be flexibly applied and allow for the expression of true constructivist ideals in online learning environments.

  9. Preliminary engineering design of sodium-cooled CANDLE core

    Science.gov (United States)

    Takaki, Naoyuki; Namekawa, Azuma; Yoda, Tomoyuki; Mizutani, Akihiko; Sekimoto, Hiroshi

    2012-06-01

    The CANDLE burning process is characterized by the autonomous shifting of burning region with constant reactivity and constant spacial power distribution. Evaluations of such critical burning process by using widely used neutron diffusion and burning codes under some realistic engineering constraints are valuable to confirm the technical feasibility of the CANDLE concept and to put the idea into concrete core design. In the first part of this paper, it is discussed that whether the sustainable and stable CANDLE burning process can be reproduced even by using conventional core analysis tools such as SLAROM and CITATION-FBR. As a result, it is certainly possible to demonstrate it if the proper core configuration and initial fuel composition required as CANDLE core are applied to the analysis. In the latter part, an example of a concrete image of sodium cooled, metal fuel, 2000MWt rating CANDLE core has been presented by assuming an emerging inevitable technology of recladding. The core satisfies engineering design criteria including cladding temperature, pressure drop, linear heat rate, and cumulative damage fraction (CDF) of cladding, fast neutron fluence and sodium void reactivity which are defined in the Japanese FBR design project. It can be concluded that it is feasible to design CADLE core by using conventional codes while satisfying some realistic engineering design constraints assuming that recladding at certain time interval is technically feasible.

  10. Commercial building design and energy conservation: a preliminary assessment

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, A.; Rosoff, D.

    1982-02-01

    The purpose of the research was to determine the degree of change in commercial building design practice relating to energy conservation since the enactment of the Energy Conservation Standard for New Buildings Act of 1976. Data on current design practices consisted of information from 400 buildings advertised for bids or under construction in 1979 to 1980 on glass in windows and doors, exterior wall systems, roof system, heating plants, and lighting systems. In addition to these building design components, energy conservation measures used included: natural lighting; deadband thermostat; greenhouse-effect atrium collector, heat recovery from the top of the atrium, greenhouse passive heating panels; natural ventilation; insulating shutters, closable skylights, thermal shutters, Trombe wall, corridor trombe; attic ventilation; wind shielding, concrete wall; titlted windows; night flushing cycle; and cooling coils using cooling tower water. A brief explanation of these measures is given. (MCW)

  11. City of Hoboken Energy Surety Analysis: Preliminary Design Summary

    Energy Technology Data Exchange (ETDEWEB)

    Stamp, Jason Edwin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Baca, Michael J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Munoz-Ramos, Karina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Schenkman, Benjamin L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Eddy, John P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Smith, Mark A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Guttromson, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electric Power Systems Research Dept.; Henry, Jordan M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Critical Infrastructure Systems Dept.; Jensen, Richard Pearson [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Geomechanics Dept.

    2014-09-01

    In 2012, Hurricane Sandy devastated much of the U.S. northeast coastal areas. Among those hardest hit was the small community of Hoboken, New Jersey, located on the banks of the Hudson River across from Manhattan. This report describes a city-wide electrical infrastructure design that uses microgrids and other infrastructure to ensure the city retains functionality should such an event occur in the future. The designs ensure that up to 55 critical buildings will retain power during blackout or flooded conditions and include analysis for microgrid architectures, performance parameters, system control, renewable energy integration, and financial opportunities (while grid connected). The results presented here are not binding and are subject to change based on input from the Hoboken stakeholders, the integrator selected to manage and implement the microgrid, or other subject matter experts during the detailed (final) phase of the design effort.

  12. OTEC SKSS preliminary designs. Volume IV. Appendixes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    ,

    1980-02-29

    This volume contains appendices to the Station Keeping Subsystem design study for the 40 MeW Modular Experiment OTEC platforms. Appendices presented include: detailed drag calculations; sample CALMS computer printouts for SPAR and BARGE static analyses; sample time domain computer printouts (Hydromechanics, Inc.) program; extreme value and fatigue load calculations; anchor design calculations; deployment calculations; bottom slope plots; time domain analysis report by Hydromechanics Inc.; detailed cost analysis; control systems study report by Sperry Systems Management; cost estimates for model basin tests; and hydrodynamic loading on the mooring cables. (WHK)

  13. Preliminary design of multi-function LIGA beamline

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    One design of multi-function LIGA beamline has been reported. In this design, two plane mirrors and a series of filters have been employed. One can choose the spectrum range of X-ray easily according to the exposure requirement by adjusting the grazing angle of mirrors and the thickness of filters. And the spot size in the horizontal direction is up to 120mm, which is large enough for exposing 5 inch silicon slice. The typical exposure time is about 1.2h, 1.8h, 0.5h, corresponding to PMMA thickness of 500 μ m, 200 μ m, 20 t m, respectively.

  14. Preliminary Design of IHTS Piping Support for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nak-Hyun; Koo, Gyeong-Hoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    A pipe support is a designed element that transfer the load from pipe to the supporting structures. Providing sufficient pipe wall thickness and installing proper supports are most important elements for structural integrity of the piping system. Piping supports are generally referred to as device used in supporting the weight of the piping. The weight includes that of the pipe proper, the content the pipe carries, and the pipe converting, such as insulation. A FE analysis was performed to select variable spring hanger of IHTS hot-leg piping for PGSFR. The calculated values will be used to design variable spring hanger.

  15. TPX: Contractor preliminary design review. Volume 2, PF systems engineering

    Energy Technology Data Exchange (ETDEWEB)

    Calvin, H.A. [Lawrence Livermore National Lab., CA (United States)

    1995-07-28

    This system development specification covers the Poloidal Field (PF) Magnet System, WBS 14 in the Princeton Plasma Physics Laboratory TPX Program to build a tokamak fusion reactor. This specification establishes the performance, design, development and test requirements of the PF Magnet System.

  16. TPX: Contractor preliminary design review. Volume 2, PF systems engineering

    Energy Technology Data Exchange (ETDEWEB)

    Calvin, H.A. [Lawrence Livermore National Lab., CA (United States)

    1995-07-28

    This system development specification covers the Poloidal Field (PF) Magnet System, WBS 14 in the Princeton Plasma Physics Laboratory TPX Program to build a tokamak fusion reactor. This specification establishes the performance, design, development and test requirements of the PF Magnet System.

  17. Preliminary design package for Sunspot Domestic Hot Water Heating System

    Science.gov (United States)

    1976-01-01

    The design review includes a drawing list, auto-control logic, measurement definitions, and other document pertaining to the solar heated prototype hot water systems and two heat exchangers. The hot water systems consist of the following subsystems: collector, storage, control transport, auxiliary energy, and site data acquisition.

  18. Soft Drink Design. USMES Teacher's Resource Book, Preliminary Edition.

    Science.gov (United States)

    Education Development Center, Inc., Newton, MA.

    This USMES unit challenges students to invent a new soft drink that would be popular and produced at a low cost. The teacher resource book for the Soft Drink Design unit contains five sections. The first section describes the USMES approach to student-initiated investigations of real problems, including a discussion of the nature of the USMES…

  19. Preliminary design concept of a subcritical reactor using available resources

    Energy Technology Data Exchange (ETDEWEB)

    Churnetski, E.L. [Oak Ridge Y-12 Plant, TN (United States); Hoyny, V.; Chaudhuri, B.R.; Taprantzis, A.; Yavas, A. [Univ. of Tennessee, Knoxville, TN (United States). Dept. of Nuclear Engineering

    1993-12-31

    During the Fall 1993 semester, a project was initiated within the Nuclear Engineering Department of the University of Tennessee with the objective of developing a design for a subcritical reactor with maximized multiplication factor using materials currently available. Such a device, if constructed, would serve as a teaching tool for the Department of Nuclear Engineering. Design work was conducted as a large number of computer calculations, with trial pile configurations based on fundamental nuclear engineering principles, in an effort to maximize multiplication factor through fuel element geometry, moderator type, fissile/moderator ratio, and reflector character. The principal objective of the design group for the early phase of this project was to present several possible ``baseline`` reactor designs and identify directions for improvements. For the sake of calculational ease, the cores analyzes to date have been of nearly cubic shape. The SCALE CSAS25 software which runs KENO.Va, a Monte Carlo code, was used for all neutronics calculations. The baseline reactors resulting from work to date are cuboidal in shape and graphite reflected. Two types of fuel element geometries are proposed, a typical triangular pitch rod lattice and an arrangement of discrete fuel slugs placed in a lattice corresponding to body centered cubic packing. The latter arrangement provides slightly higher multiplication factors than the former. Calculations were performed for both graphite and heavy water moderation with heavy water moderation producing considerably higher multiplication factors, as expected. In general, the maximum k{sub eff} for the reactors are in the range of 0.5 to 0.9, well subcritical, except in the cases of the extreme possible values of fuel assay where critical configurations are possible. In these cases, designs with reduced fuel loading are recommended to assure a subcritical multiplication factor.

  20. Preliminary safety analysis for key design features of KALIMER-600

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. B.; Chang, W. P.; Suk, S. D.; Ha, K. S.; Jeong, H. Y.; Heo, S

    2004-03-01

    KAERI is developing the conceptual design of a Liquid Metal Reactor, KALIMER-600 (Korea Advanced LIquid MEtal Reactor) under the Long-term Nuclear R and D Program. KALIMER-600 addresses key issues regarding future nuclear power plants such as plant safety, economics, proliferation, and waste. In this report, key safety design features are described and safety analyses results for typical ATWS accidents in the KALIMER design with breakeven core are presented. First, the basic approach to achieve the safety goal is introduced in Chapter 1, and the event categorization and acceptance criteria for the KALIMER-600 safety analysis are described in Chapter 2. In Chapter 3, results of inherent safety evaluations for the KALIMER-600 conceptual design are presented. The KALIMER-600 core and plant system are designed to assure benign performance during a selected set of events without either reactor control or protection system intervention. Safety analyses for the postulated Anticipated Transient Without Scram (ATWS) have been performed using the SSC-K code to investigate the KALIMER-600 system response to the events. They are categorized as Bounding Events (BEs) because of their low probability of occurrence. In Chapter 4, the analysis of flow blockage for KALIMER-600 with the MATRA-LMR-FB code, which has been developed for the internal flow blockage in a LMR subassembly. The cases with a blockage of 6-subchannel, 24-subchannel, and 54-subchannel are analyzed.The performance analysis of the KALIMER-600 containment and some evaluations for the behaviors during HCDA will be performed later.

  1. Preliminary design and parametric study of 1400 m partially earth-anchored cable-stayed bridge

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The preliminary design and parametric study of 1400 m partially earth-anchored cable-stayed bridge are described. Static per-formance of this new type of bridge is discussed. Compared with fully self-anchored cable-stayed bridge, its advantages in fin-ished state are summarized. Based on numerical calculation, effects of several structural parameters on static performance are presented.

  2. Preliminary coating design and coating developments for ATHENA

    DEFF Research Database (Denmark)

    Jakobsen, Anders Clemen; Ferreira, Desiree Della Monica; Christensen, Finn Erland

    2011-01-01

    We present initial novel coating design for ATHENA. We make use of both simple bilayer coatings of Ir and B4C and more complex constant period multilayer coatings to enhance the effective area and cover the energy range from 0.1 to 10 keV. We also present the coating technology used for these des......We present initial novel coating design for ATHENA. We make use of both simple bilayer coatings of Ir and B4C and more complex constant period multilayer coatings to enhance the effective area and cover the energy range from 0.1 to 10 keV. We also present the coating technology used...

  3. Yakima/Klickitat Production Preliminary Design Report, Appendix C: Yakima and Klickitat Preliminary Engineering Reports.

    Energy Technology Data Exchange (ETDEWEB)

    CH2M Hill; R.W. Beck and Associates.

    1990-03-01

    This chapter describes the biological and physical fish culture requirements of the hatchery system from which the concepts for the design are formulated. It includes a discussion of the program goals for fish production in the Yakima Basin followed by a brief summary of selected sites. The biological criteria are presented for the water system, adult holding, incubation, rearing, and finally transportation and release. The biological criteria address the water and space requirements, the number and type of vessels, and the related support requirements. To be assured that the components of the system meet all program demands, each life phase from adult capture to the juvenile or smolt transfer into the acclimation sites is analyzed.

  4. Development of safety and regulatory requirements for Korean next generation reactor - Development of human factors design review guidelines (II)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Lee, Hyun Chul; Cheon, Se Woo [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-02-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25. Human Factors Engineering Program Review Model' and '26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and the characteristics of the KNGR design, and reviewing the reference documents of NURGE-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides at KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system design review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we updated the guidelines by reviewing the literature related to alarm design that published after 1994. 12 refs., 11 figs., 2 tabs. (Author)

  5. Design guidelines for use of adhesives in hybrid microcircuits. [for electronic equipment in space applications

    Science.gov (United States)

    Caruso, S. V.; Perkins, K. L.; Licari, J. J.

    1973-01-01

    Although it is generally accepted that the use of adhesives in the assembly of hybrid microcircuits offers advantages over other bonding methods, there currently does not exist a set of guidelines for the selection of adhesives which will insure that hybrid microcircuits assembled with them will meet the long use-life, high-reliability requirements of electronic equipment for space applications. This study was directed to the identification of the properties of electrically insulative adhesives that potentially could cause problems in such an application, and to the development of evaluation tests to quantify these properties and thus form the basis for establishing suitable guidelines and, ultimately, specifications. Bond strength, outgassing after cure, and corrosivity were selected for detailed attention since they are considered to be especially critical. Introductory discussion includes enumeration and brief comments on the properties of adhesives considered to be important for the proposed application, a general review of polymeric types of adhesives, and identification of the major types of adhesives commercially available and specifically designed for microelectronic use. The specific tests developed to evaluate bond strength, outgassing after cure, and corrosivity are discussed in detail, and comparative results obtained for selected adhesives representative of the major types are given.

  6. Preliminary Axial Flow Turbine Design and Off-Design Performance Analysis Methods for Rotary Wing Aircraft Engines. Part 1; Validation

    Science.gov (United States)

    Chen, Shu-cheng, S.

    2009-01-01

    For the preliminary design and the off-design performance analysis of axial flow turbines, a pair of intermediate level-of-fidelity computer codes, TD2-2 (design; reference 1) and AXOD (off-design; reference 2), are being evaluated for use in turbine design and performance prediction of the modern high performance aircraft engines. TD2-2 employs a streamline curvature method for design, while AXOD approaches the flow analysis with an equal radius-height domain decomposition strategy. Both methods resolve only the flows in the annulus region while modeling the impact introduced by the blade rows. The mathematical formulations and derivations involved in both methods are documented in references 3, 4 for TD2-2) and in reference 5 (for AXOD). The focus of this paper is to discuss the fundamental issues of applicability and compatibility of the two codes as a pair of companion pieces, to perform preliminary design and off-design analysis for modern aircraft engine turbines. Two validation cases for the design and the off-design prediction using TD2-2 and AXOD conducted on two existing high efficiency turbines, developed and tested in the NASA/GE Energy Efficient Engine (GE-E3) Program, the High Pressure Turbine (HPT; two stages, air cooled) and the Low Pressure Turbine (LPT; five stages, un-cooled), are provided in support of the analysis and discussion presented in this paper.

  7. Preliminary design study of the Tandem Mirror Reactor (TMR)

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Barr, W.L.; Carlson, G.A.

    1978-07-15

    This report describes work done in Fiscal Year 1977 by the Fusion Reactor Studies Group of LLL on the conceptual design of a 1000-MW(e) Tandem Mirror Reactor (TMR). The high Q (defined as the ratio of fusion power to injection power) predicted for the TMR (approximately 5) reduces the recirculating power to a nondominant problem and results in an attractive mirror fusion power plant. The fusion plasma of the TMR is contained in the 100-m-long central cell where the magnetic field strength is a modest 2 T. The blanket for neutron energy recovery and tritium breeding is cylindrical and, along with the solenoidal magnet, is divided into 3-m-long modules to facilitate maintenance. The central cell is fueled (but not heated) by the injection of low-energy neutral beams near its ends. Thus, the central cell is simple and of low technology. The end-cell plasmas must be of high density and high energy in order to plug and heat (via the electrons) the central-cell plasma. The present conceptual design uses 1.2-MeV neutral-beam injection for the end plugs and a cryogenic-aluminum, Yin-Yang magnet that produces an incremental field of about 1 T over a field of 16 T produced by a pair of Nb/sub 3/Sn superconducting solenoids. Important design problems remain in both the neutral-beam injector and in the end-plug magnet. Also remaining are important physics questions such as alpha-beam particle transport and end-plug stability. These questions are discussed at length in the report and suggestions for future work are given.

  8. Preliminary Design Options for Meteor Burst Communications Systems Buoy Relays

    Science.gov (United States)

    1986-12-01

    the lithium - thionyl chloride cell exhibit specific energies of the order of 500 watt hours per kilogram, more than 50 percent higher than previous...Supply Buoy Design Type 90 Day Storage Weight Type Energy Type Size (lb) Remote Lithium 2.2 kWh Deployable 8" x 8" x 4’ 200 Battery Pendulous Master...however, that there are various typcs of lithium batteries presently being developed that have energy densities equal to’fuel cell power systems. It is

  9. Preliminary structural evaluation and design of the HL-20

    Science.gov (United States)

    Bush, Lance B.; Wahls, Deborah M.; Robinson, James C.

    1993-02-01

    Several concepts have been proposed to meet the requirements of a Personnel Launch System. A lifting body concept, the HL-20, was designed at NASA Langley Research Center. A structural analysis of a proposed HL-20 configuration with a cylindrical pressurized crew cabin is presented in this paper. Loads for the vehicle are assembled from mission loading conditions such as abort, on-orbit pressurization, blast overpressure, aerodynamic maneuver, and touchdown. The critical loading conditions are identified and resultant loads mapped onto the structure in order to review the effects of the mission loading conditions. The HL-20 structural concept is sized for the mission loads and the resulting structural weights are calculated.

  10. Design of Pulsed Strong Magnetic Fields Generator and Preliminary Application

    Institute of Scientific and Technical Information of China (English)

    WEN Jun; QU Xue-min; WANG Xi-gang; LONG Kai-ping

    2015-01-01

    Objective: This paper aims to designing a pulsed strong magnetic fields generator. Methods: A large value capacitor was used to store electric energy, coil was used for producing magnetic fields, main control, circuit control charge, sampling, discharge, etc. Results: The generator provided a pulsed magnetic field with the ampli-tude of intensity from 0.1-2 T and variable time interval of pulse from 4 s-1 min. It was not only to be operated easily but also performed reliably. Conclusion:The generator will be applied in special clinical diagnosis, therapy and other fields.

  11. Building Case—Based Preliminary Design Systems:A Hopfield Network Approach

    Institute of Scientific and Technical Information of China (English)

    吴维; 盛之进; 等

    1994-01-01

    This paper addresses the issue of building a case-based preliminary desing system by using Hopfield networks.One limitation of Hopfield networks is that it cannot be trained,i.e.the weights between two neurons must be set in advance.A pattern stored in Hopfield networks cannot be recalled if the pattern is not a local minimum.Two concepts are proposed to deal with this problem.They are the multiple training encoding method and the puppet encoding method.The multiple training encoding method,which guarantees to recall a single stored pattern under appropriate initial conditions of data,is theoreticall analyzed,and the minimal number of times for using a pattern for training to guarantee recalling of the pattern among a set of patterns is derived.The puppet encoding method is proved to be able to guarantee recalling of all stored patterns if attaching puppet data to the stored patterns is available. An integrated software PDS (Preliminary Design System),which is developed from two aspects,is described.One is from a case-based expert system--CPDS(Case-based Preliminary Design System),which is based on the algorithm of the Hopfield and developed for uncertain problems in PDS;the other is RPDS (Rule-based Preliminary Design System),which attacks logic or deduced problems in PDS.Based on the results of CPDS,RPDS can search for feasible solution in design model.CPDS is demonstrated to be useful in the domains of preliminary designs of cable-stayed bridges in this paper.

  12. Muon-catalyzed fusion experiment target and detector system. Preliminary design report

    Energy Technology Data Exchange (ETDEWEB)

    Jones, S.E.; Watts, K.D.; Caffrey, A.J.; Walter, J.B.

    1982-03-01

    We present detailed plans for the target and particle detector systems for the muon-catalyzed fusion experiment. Requirements imposed on the target vessel by experimental conditions and safety considerations are delineated. Preliminary designs for the target vessel capsule and secondary containment vessel have been developed which meet these requirements. In addition, the particle detection system is outlined, including associated fast electronics and on-line data acquisition. Computer programs developed to study the target and detector system designs are described.

  13. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume II. Plant specifications

    Energy Technology Data Exchange (ETDEWEB)

    Price, R. E.

    1983-12-31

    The specifications and design criteria for all plant systems and subsystems used in developing the preliminary design of Carrisa Plains 30-MWe Solar Plant are contained in this volume. The specifications have been organized according to plant systems and levels. The levels are arranged in tiers. Starting at the top tier and proceeding down, the specification levels are the plant, system, subsystem, components, and fabrication. A tab number, listed in the index, has been assigned each document to facilitate document location.

  14. Kemper County IGCC (tm) Project Preliminary Public Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Matt; Rush, Randall; Madden, Diane; Pinkston, Tim; Lunsford, Landon

    2012-07-01

    The Kemper County IGCC Project is an advanced coal technology project that is being developed by Mississippi Power Company (MPC). The project is a lignite-fueled 2-on-1 Integrated Gasification Combined-Cycle (IGCC) facility incorporating the air-blown Transport Integrated Gasification (TRIG™) technology jointly developed by Southern Company; Kellogg, Brown, and Root (KBR); and the United States Department of Energy (DOE) at the Power Systems Development Facility (PSDF) in Wilsonville, Alabama. The estimated nameplate capacity of the plant will be 830 MW with a peak net output capability of 582 MW. As a result of advanced emissions control equipment, the facility will produce marketable byproducts of ammonia, sulfuric acid, and carbon dioxide. 65 percent of the carbon dioxide (CO{sub 2}) will be captured and used for enhanced oil recovery (EOR), making the Kemper County facility’s carbon emissions comparable to those of a natural-gas-fired combined cycle power plant. The commercial operation date (COD) of the Kemper County IGCC plant will be May 2014. This report describes the basic design and function of the plant as determined at the end of the Front End Engineering Design (FEED) phase of the project.

  15. Integrated Box Interrogation System (IBIS) Preliminary Design Study

    Energy Technology Data Exchange (ETDEWEB)

    DR. Stephen Croft; Mr. David Martancik; Dr. Brian Young; Dr. Patrick MJ Chard; Dr. Robert J Estop; Sheila Melton; Gaetano J. Arnone

    2003-01-13

    Canberra Industries has won the tendered solicitation, INEEL/EST-99-00121 for boxed waste Nondestructive Assay Development and Demonstration. Canberra will provide the Integrated Box Interrogation System (IBIS) which is a suite of assay instrumentation and a data reduction system that addresses the measurement needs for Boxed Wastes identified in the solicitation and facilitates the associated experimental program and demonstration of system capability. The IBIS system will consist of the next generation CWAM system, i.e. CWAM II, which is a Scanning Passive/Active Neutron interrogation system which we will call a Box Segmented Neutron Scanner (BSNS), combined with a physically separate Box Segmented Gamma-ray Scanning (BSGS) system. These systems are based on existing hardware designs but will be tailored to the large sample size and enhanced to allow the program to evaluate the following measurement criteria:Characterization and correction for matrix heterogeneity Characterization of non-uniform radio-nuclide and isotopic compositions Assay of high density matrices (both high-Z and high moderator contents)Correction for radioactive material physical form - such as self shielding or multiplication effects due to large accumulations of radioactive materials.Calibration with a minimal set of reference standards and representative matrices.THis document summarizes the conceptual design parameters of the IBIS and indicates areas key to the success of the project where development is to be centered. The work presented here is a collaborative effort between scientific staff within Canberra and within the NIS-6 group at LANL.

  16. Design and preliminary assessment of Vanderbilt hand exoskeleton.

    Science.gov (United States)

    Gasser, Benjamin W; Bennett, Daniel A; Durrough, Christina M; Goldfarb, Michael

    2017-07-01

    This paper presents the design of a hand exoskeleton intended to enable or facilitate bimanual activities of daily living (ADLs) for individuals with chronic upper extremity hemiparesis resulting from stroke. The paper describes design of the battery-powered, self-contained exoskeleton and presents the results of initial testing with a single subject with hemiparesis from stroke. Specifically, an experiment was conducted requiring the subject to repeatedly remove the lid from a water bottle both with and without the hand exoskeleton. The relative times required to remove the lid from the bottles was considerably lower when using the exoskeleton. Specifically, the average amount of time required to grasp the bottle with the paretic hand without the exoskeleton was 25.9 s, with a standard deviation of 33.5 s, while the corresponding average amount of time required to grasp the bottle with the exoskeleton was 5.1 s, with a standard deviation of 1.9 s. Thus, the task time involving the paretic hand was reduced by a factor of five, while the standard deviation was reduced by a factor of 16.

  17. Developing and implementing the Active Design Guidelines in New York City.

    Science.gov (United States)

    Lee, Karen K

    2012-01-01

    Physical inactivity is a leading cause of death in the United States and globally and is also associated with several additional leading causes of death, including obesity, high blood pressure and high blood glucose. The built environment plays a critical role in promoting or discouraging physical activity among adults and children. To create a healthier and more physically active city, a working group comprising several New York City agencies, including the Departments of Design and Construction, Health and Mental Hygiene, Transportation and City Planning, and in collaboration with design organizations and academics, published the Active Design Guidelines (ADG; ) in January 2010. The ADG is a manual of evidence-based and best-practice strategies for increasing physical activity in the design and construction of neighborhoods, streets and buildings. The commentary discusses key activities and events leading up to the publication as well as current implementation activities. It also shares the lessons learned that could assist other communities interested in improving their built environments in developing and implementing similar activities and initiatives. Copyright © 2011. Published by Elsevier Ltd.

  18. Designing an automated clinical decision support system to match clinical practice guidelines for opioid therapy for chronic pain

    Directory of Open Access Journals (Sweden)

    Clark Michael E

    2010-04-01

    Full Text Available Abstract Background Opioid prescribing for chronic pain is common and controversial, but recommended clinical practices are followed inconsistently in many clinical settings. Strategies for increasing adherence to clinical practice guideline recommendations are needed to increase effectiveness and reduce negative consequences of opioid prescribing in chronic pain patients. Methods Here we describe the process and outcomes of a project to operationalize the 2003 VA/DOD Clinical Practice Guideline for Opioid Therapy for Chronic Non-Cancer Pain into a computerized decision support system (DSS to encourage good opioid prescribing practices during primary care visits. We based the DSS on the existing ATHENA-DSS. We used an iterative process of design, testing, and revision of the DSS by a diverse team including guideline authors, medical informatics experts, clinical content experts, and end-users to convert the written clinical practice guideline into a computable algorithm to generate patient-specific recommendations for care based upon existing information in the electronic medical record (EMR, and a set of clinical tools. Results The iterative revision process identified numerous and varied problems with the initially designed system despite diverse expert participation in the design process. The process of operationalizing the guideline identified areas in which the guideline was vague, left decisions to clinical judgment, or required clarification of detail to insure safe clinical implementation. The revisions led to workable solutions to problems, defined the limits of the DSS and its utility in clinical practice, improved integration into clinical workflow, and improved the clarity and accuracy of system recommendations and tools. Conclusions Use of this iterative process led to development of a multifunctional DSS that met the approval of the clinical practice guideline authors, content experts, and clinicians involved in testing. The

  19. Preliminary Design Study for a National Digital Seismograph Network

    Science.gov (United States)

    Peterson, Jon; Hutt, Charles R.

    1981-01-01

    Introduction Recently, the National Research Council published a report by the Panel on National, Regional, and Local Seismograph Networks of the Committee on Seismology in which the principal recommendation was for the establishment of a national digital seismograph network (NDSN). The Panel Report (Bolt, 1980) addresses both the need and the scientific requirements for the new national network. The purpose of this study has been to translate the scientific requirements into an instrumentation concept for the NSDS. There are literally hundreds, perhaps thousands, of seismographs in operation within the United States. Each serves an important purpose, but most have limited objectives in time, in region, or in the types of data that are being recorded. The concept of a national network, funded and operated by the Federal Government, is based on broader objectives that include continuity of time, uniform coverage, standardization of data format and instruments, and widespread use of the data for a variety of research purposes. A national digital seismograph network will be an important data resource for many years to come; hence, its design is likely to be of interest to most seismologists. Seismologists have traditionally been involved in the development and field operation of seismic systems and thus have been familiar with both the potential value and the limitations of the data. However, in recent years of increasing technological sophistication, the development of data sstems has fallen more to system engineers, and this trend is likely to continue. One danger in this is that the engineers may misinterpret scientific objectives or subordinate them to purely technological considerations. Another risk is that the data users may misuse or misinterpret the data because they are not aware of the limitations of the data system. Perhaps the most important purpose of a design study such as this is to stimulate a dialogue between system engineers and potential data users

  20. Integrated Box Interrogation System (IBIS) Preliminary Design Study

    CERN Document Server

    Croft, S; Chard-Mj, P; Estop, J R; Martancik, D; Sheila-Melton; Young, B

    2003-01-01

    Canberra Industries has won the tendered solicitation, INEEL/EST-99-00121 for boxed waste Nondestructive Assay Development and Demonstration. Canberra will provide the Integrated Box Interrogation System (IBIS) which is a suite of assay instrumentation and a data reduction system that addresses the measurement needs for Boxed Wastes identified in the solicitation and facilitates the associated experimental program and demonstration of system capability. The IBIS system will consist of the next generation CWAM system, i.e. CWAM II, which is a Scanning Passive/Active Neutron interrogation system which we will call a Box Segmented Neutron Scanner (BSNS), combined with a physically separate Box Segmented Gamma-ray Scanning (BSGS) system. These systems are based on existing hardware designs but will be tailored to the large sample size and enhanced to allow the program to evaluate the following measurement criteria:Characterization and correction for matrix heterogeneity Characterization of non-uniform radio-nucli...

  1. Expanded microchannel heat exchanger: design, fabrication and preliminary experimental test

    CERN Document Server

    Denkenberger, David C; Pearce, Joshua M; Zhai, John; 10.1177/0957650912442781

    2012-01-01

    This paper first reviews non-traditional heat exchanger geometry, laser welding, practical issues with microchannel heat exchangers, and high effectiveness heat exchangers. Existing microchannel heat exchangers have low material costs, but high manufacturing costs. This paper presents a new expanded microchannel heat exchanger design and accompanying continuous manufacturing technique for potential low-cost production. Polymer heat exchangers have the potential for high effectiveness. The paper discusses one possible joining method - a new type of laser welding named "forward conduction welding," used to fabricate the prototype. The expanded heat exchanger has the potential to have counter-flow, cross-flow, or parallel-flow configurations, be used for all types of fluids, and be made of polymers, metals, or polymer-ceramic precursors. The cost and ineffectiveness reduction may be an order of magnitude or more, saving a large fraction of primary energy. The measured effectiveness of the prototype with 28 micro...

  2. The Large Synoptic Survey Telescope preliminary design overview

    Science.gov (United States)

    Krabbendam, V. L.; Sweeney, D.

    2010-07-01

    The Large Synoptic Survey Telescope (LSST) Project is a public-private partnership that is well into the design and development of the complete observatory system to conduct a wide fast deep survey and to process and serve the data. The telescope has a 3-mirror wide field optical system with an 8.4 meter primary, 3.4 meter secondary, and 5 meter tertiary mirror. The reflective optics feed three refractive elements and a 64 cm 3.2 gigapixel camera. The LSST data management system will reduce, transport, alert and archive the roughly 15 terabytes of data produced nightly, and will serve the raw and catalog data accumulating at an average of 7 petabytes per year to the community without any proprietary period. The project has completed several data challenges designed to prototype and test the data management system to significant pre-construction levels. The project continues to attract institutional partners and has acquired non-federal funding sufficient to construct the primary mirror, already in progress at the University of Arizona, build the secondary mirror substrate, completed by Corning, and fund detector prototype efforts, several that have been tested on the sky. A focus of the project is systems engineering, risk reduction through prototyping and major efforts in image simulation and operation simulations. The project has submitted a proposal for construction to the National Science Foundation Major Research Equipment and Facilities Construction (MREFC) program and has prepared project advocacy papers for the National Research Council's Astronomy 2010 Decadal Survey. The project is preparing for a 2012 construction funding authorization.

  3. Improved reporting of statistical design and analysis: guidelines, education, and editorial policies.

    Science.gov (United States)

    Mazumdar, Madhu; Banerjee, Samprit; Van Epps, Heather L

    2010-01-01

    A majority of original articles published in biomedical journals include some form of statistical analysis. Unfortunately, many of the articles contain errors in statistical design and/or analysis. These errors are worrisome, as the misuse of statistics jeopardizes the process of scientific discovery and the accumulation of scientific knowledge. To help avoid these errors and improve statistical reporting, four approaches are suggested: (1) development of guidelines for statistical reporting that could be adopted by all journals, (2) improvement in statistics curricula in biomedical research programs with an emphasis on hands-on teaching by biostatisticians, (3) expansion and enhancement of biomedical science curricula in statistics programs, and (4) increased participation of biostatisticians in the peer review process along with the adoption of more rigorous journal editorial policies regarding statistics. In this chapter, we provide an overview of these issues with emphasis to the field of molecular biology and highlight the need for continuing efforts on all fronts.

  4. Moving Average Filter-Based Phase-Locked Loops: Performance Analysis and Design Guidelines

    DEFF Research Database (Denmark)

    Golestan, Saeed; Ramezani, Malek; Guerrero, Josep M.

    2014-01-01

    The phase locked-loops (PLLs) are probably the most widely used synchronization technique in grid-connected applications. The main challenge associated with the PLLs is how to precisely and fast estimate the phase and frequency when the grid voltage is unbalanced and/or distorted. To overcome...... this challenge, incorporating moving average filter(s) (MAF) into the PLL structure has been proposed in some recent literature. A MAF is a linear-phase finite impulse response filter which can act as an ideal low-pass filter, if certain conditions hold. The main aim of this paper is to present the control...... design guidelines for a typical MAF-based PLL. The paper starts with the general description of MAFs. The main challenge associated with using the MAFs is then explained, and its possible solutions are discussed. The paper then proceeds with a brief overview of the different MAF-based PLLs. In each case...

  5. Classroom acoustics design guidelines based on the optimization of speaker conditions

    DEFF Research Database (Denmark)

    Pelegrin Garcia, David; Brunskog, Jonas

    2012-01-01

    School teachers suffer frequently from voice problems due to the high vocal load that they experience and the not-always-ideal conditions under which they have to teach. Traditionally, the purpose of the acoustic design of classrooms has been to optimize speech intelligibility. New guidelines...... and noise level measurements in classrooms. Requirements of optimum vocal comfort, average A-weighted speech levels across the audience higher than 50 dB, and a physical volume higher than 6 m3/student are combined to extract optimum acoustic conditions, which depend on the number of students....... These conditions, which are independent on the position of the speaker, cannot be optimum for more than 50 students. For classrooms with 10 students, the reverberation time in occupied conditions shall be between 0.5 and 0.65 s, and the volume between 60 and 170 m3. For classrooms with 40 students...

  6. Modeling and Design Guidelines for P⁺ Guard Rings in Lightly Doped CMOS Substrates

    DEFF Research Database (Denmark)

    Shen, Ming; Mikkelsen, Jan H.; Zhang, Ke;

    2013-01-01

    This paper presents a compact model for ${rm P}^{+}$ guard rings in lightly doped CMOS substrates featuring a P-well layer. Simple expressions for the impedances in the model are derived based on a conformal mapping approach. The model can be used to predict the noise suppression performance...... of ${rm P}^{+}$ guard rings in terms of S-parameters, which is useful for substrate noise mitigation in mixed-signal system-on-chips. Validation of the model has been done by both electromagnetic simulation and experimental results from guard rings implemented using a standard 0.18-$mu{rm m}$ CMOS process....... In addition, design guidelines have been drawn for minimizing the guard ring size while maintaining the noise suppression performance....

  7. Laser-based space debris removal: design guidelines for coherent coupling power transmission

    Science.gov (United States)

    Kästel, Jürgen; Speiser, Jochen

    2016-10-01

    Space debris presents an increasing threat to the lifetime of commercial and military space assets. Laser-based space debris removal systems could potentially mitigate this threat by targeting debris objects in the cm-range. In order to reach this goal a minimum fluence of a few J/cm² on the debris object and a pulse repetition rate of several 10 Hz are necessary. These requirements can be met by coupling 1000-2000 independent 10 J laser sources coherently and employing a sending telescope with a diameter of 5 m. We analyze which parameters are critical to the effectiveness of the transmission system and deduce design guidelines. In particular the effects of non-optimum filling factors, secondary mirror size, emitter intensity distribution and phase jitter of the individual emitters are discussed and compared.

  8. Preliminary design and R&D of ITER diagnostic-radial X-ray camera

    Science.gov (United States)

    Hu, L.; Chen, K.; Chen, Y.; Cao, H.; Li, S.; Yu, H.; Zhan, J.; Shen, J.; Qin, S.; Sheng, X.; Zhao, J.; Niu, L.; Feng, C.; Ge, J.; Zhang, S.; Zhang, B.

    2017-10-01

    Preliminary design of ITER Radial X-ray Camera (RXC) has been finished. The structure design is optimized and installation process is studied considering the simplification and easiness of maintenance. Remote handling procedures are designed for the system maintenance after being activated. For detector cooling against high environment temperature which can be up to 240°, a dedicated gas cooling system using heat exchanger is designed. The structure analysis indicates that the stresses and displacements of most of the components under load combinations are within the allowable limits and no Safety Important Component (SIC) boundary is damaged. Through putting B4C material in the front part of DSM and around detectors for neutron shielding, the detectors are expected to survive the whole D-D phase. As for electronics, preliminary design of highly integrated pre-amplifier and program controllable mid-amplifier has been completed, both with bandwidth greater than 100 kHz to meet time resolution requirement of 20 kHz. To protect the electronics from intensive neutron and gamma irradiation, shielding cabinet capable of attenuating neutron flux down to 0.0001 and gamma dose 0.01 is designed. Besides, many R&D has been done to support the design. The tests of pre-amplifier and mid-amplifier indicated the electronics had no functional problem when debugging together and generally passed preliminary ElectroMagnetic Compatibility (EMC) test and nuclear test. The highly-integrated compact pre-amplifier has been used in EAST and proved useful. To test the feasibility of dedicated gas cooling system for detectors, a cooling test platform was built and preliminary cooling test has been done, indicating that during 250°baking the detector temperature is promising to be cooled down to the detector temperature limit of 75°. To increase signal to noise ratio, large area detector with dark current less than 2nA has been manufactured and worked steadily in EAST experiments.

  9. Farm Fuel Alcohol Project: preliminary report on facility design

    Energy Technology Data Exchange (ETDEWEB)

    Pile, R S; Badger, P C; Roetheli, J C; Waddell, Jr, E L

    1979-09-01

    This report describes the design of a farm-based ethanol production system to be built by TVA at Muscle Shoals, Alabama. This facility will include cooking, fermentation, and distillation equipment to allow production of 8000 to 12,000 gallons of fuel ethanol during a three to four month period each year. Output will be about 10 gallons of 190-proof ethanol per hour. Present components are sized to allow 12 to 14 hour daily operation as a semi-continuous batch system. Intent of the project is to document equipment and energy requirements, ethanol yields, and feasibility of small farm-based ethanol plants for farm fuel self-sufficiency. Cooking and fermentation will be batch-type operations, and packed distillation columns will be used for separating ethanol from the fermented beer. Energy recovery and waste heat use are integrated when feasible. The fermented beer will be fed directly to the distillation columns without separation of solids. Although this is an area of concern, an economical method of separation could not be identified.

  10. Embodiment and Interaction Design Guidelines for Designing Credible, Trustworthy Embodied Conversational Agents

    Energy Technology Data Exchange (ETDEWEB)

    Cowell, Andrew J.; Stanney, Kay M.; Thomas Rist

    2003-09-01

    This paper discusses our recent studies on Embodied Conversational Agent (ECA) design strategies. We attack the problem from two specific directions, that is, via the embodiment that the character wears during its relations with the user, and the method of interaction used by the ECA to engage the user in a dialogue. A rigorous literature review lead to a set of hypotheses that were empirically validated. Our results indicate that while users generally prefer to interact with a young character matching their ethnicity, no significant preference were indicated for character gender. For interaction, our results indicated that there were no significant differences in perceived trust between the facial and facial/body treatments (suggesting there is little utility in adding gesture and posture behaviors to an interaction scheme) although both were rated much higher than the non-trusting treatment. Other interesting results (e.g. people with a high propensity to trust were more trustworthy across treatments, users that interacted with the non-trusting character made more mistakes, disliked the interaction and felt less in control than users in the other treatments) from this work are also discussed.

  11. Neutronic analyses of the preliminary design of a DCLL blanket for the EUROfusion DEMO power plant

    Energy Technology Data Exchange (ETDEWEB)

    Palermo, Iole, E-mail: iole.palermo@ciemat.es; Fernández, Iván; Rapisarda, David; Ibarra, Angel

    2016-11-01

    Highlights: • We perform neutronic calculations for the preliminary DCLL Blanket design. • We study the tritium breeding capability of the reactor. • We determine the nuclear heating in the main components. • We verify if the shielding of the TF coil is maintained. - Abstract: In the frame of the newly established EUROfusion WPBB Project for the period 2014–2018, four breeding blanket options are being investigated to be used in the fusion power demonstration plant DEMO. CIEMAT is leading the development of the conceptual design of the Dual Coolant Lithium Lead, DCLL, breeding blanket. The primary role of the blanket is of energy extraction, tritium production, and radiation shielding. With this aim the DCLL uses LiPb as primary coolant, tritium breeder and neutron multiplier and Eurofer as structural material. Focusing on the achievement of the fundamental neutronic responses a preliminary blanket model has been designed. Thus detailed 3D neutronic models of the whole blanket modules have been generated, arranged in a specific DCLL segmentation and integrated in the generic DEMO model. The initial design has been studied to demonstrate its viability. Thus, the neutronic behaviour of the blanket and of the shield systems in terms of tritium breeding capabilities, power generation and shielding efficiency has been assessed in this paper. The results demonstrate that the primary nuclear performances are already satisfactory at this preliminary stage of the design, having obtained the tritium self-sufficiency and an adequate shielding.

  12. Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    Westinghouse has completed the Preliminary Desigh Phase for the Power System Development of the Ocean Thermal Energy Conversion (OTEC) Demonstration Plant project. This study included the development of a preliminary design for a Modular Application scaled power system (10MWe) and Heat Exchanger Test Articles, both based on the concept developed in the Conceptual Design Phase. The results of this study were used to improve the baseline design of the 50MWe module for the Commercial Size Power System, which was recommended for the demonstration plant by the conceptual design study. The 50MWe module was selected since it has the lowest cost, and since its size convincingly demonstrates that future economically viable commercial plants, having reliable operation with credible anticipated costs, are possible. Additional optimization studies on the size of the power system plus hull continue to identify 50MWe as the preferred minimum cost configuration. This study was limited to a closed cycle ammonia power system module, using a seawater temperature difference of 40/sup 0/F, and a surface platform/ship reference hull. This volume presents the preliminary design configuration and system optimization. (WHK)

  13. Ocean thermal energy conversion (OTEC) power system development. Preliminary design report, Appendices, Part 1 (Final)

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    The objective of this project is the development of a preliminary design for a full-sized, closed cycle, ammonia power system module for the 100 MWe OTEC demonstration plant. In turn, this demonstration plant is to demonstrate, by 1984, the operation and performance of an Ocean Thermal Power Plant having sufficiently advanced heat exchanger design to project economic viability for commercial utilization in the late 1980's and beyond. Included in this power system development are the preliminary designs for a proof-of-concept pilot plant and test article heat exchangers which are scaled in such a manner as to support a logically sequential, relatively low-cost development of the full-scale power system module. The conceptual designs are presented for the demonstration plant power module, the proof-of-concept pilot plant, and for a pair of test article heat exchangers. Costs associated with the design, development, fabrication, checkout, delivery, installation, and operation are included. The accompanying design and producibilty studies on the full-scale power system module project the performance/economics for the commercial plant. This section of the report contains appendices on the developed computer models, water system dynamic studies, miscellaneous performance analysis, materials and processes, detailed equipment lists, turbine design studies, tube cleaner design, ammonia leak detection, and heat exchanger design supporting data. (WHK)

  14. Preliminary Design Report for the Yakima/Klickitat Production Project; Executive Summary.

    Energy Technology Data Exchange (ETDEWEB)

    US Bonneville Power Administration.

    1990-03-01

    A master plan for the Yakima/Klickitat Production Project (YKPP) was developed by the Northwest Power Planning Council (Council) on October 15, 1987, as a reasonable basis upon which the Bonneville Power Administration (BPA) could proceed to fund predesign work on the project. The Council approved the predesign work on the condition that eight preliminary tasks were completed. These tasks are: Agreement on a refined statement of project goals. Completion of a technical analysis of water supplies. Completion of an experimental design plan. Development of a harvest management plan. Assessment of potential genetic risks. Project coordination with all other affected parties. Submission of a preliminary design report to the Council. Develop a project management structure. The preliminary design report summarizes the work completed on these tasks. It provides a description of the preliminary design, engineering, and construction phases of project development, and gives an estimate of project costs. Also included is a description of other studies that were conducted to support YKPP planning. The results of studies conducted during the last 30 months indicate that hatchery facilities can be built in the Yakima and Klickitat subbasins to provide harvest benefits and to supplement natural production. Planning for the Yakima subbasin is at a more advanced stage of development than for the Klickitat subbasin because of greater availability of basic resource information. The information needed to proceed with final design and construction for the Klickitat subbasin will be available by 1992, as ongoing predesign work continues. This schedule is consistent with the anticipated phased completion of the YKPP by 1997.

  15. Preliminary Design and Analysis of the ARES Atmospheric Flight Vehicle Thermal Control System

    Science.gov (United States)

    Gasbarre, J. F.; Dillman, R. A.

    2003-01-01

    The Aerial Regional-scale Environmental Survey (ARES) is a proposed 2007 Mars Scout Mission that will be the first mission to deploy an atmospheric flight vehicle (AFV) on another planet. This paper will describe the preliminary design and analysis of the AFV thermal control system for its flight through the Martian atmosphere and also present other analyses broadening the scope of that design to include other phases of the ARES mission. Initial analyses are discussed and results of trade studies are presented which detail the design process for AFV thermal control. Finally, results of the most recent AFV thermal analysis are shown and the plans for future work are discussed.

  16. Ocean thermal energy conversion (OTEC). Power system development. Preliminary design report, final

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    The preliminary design of the 10 MWe OTEC power module and the 200 kWe test articles is given in detail. System operation and performance; power system cost estimates; 10 MWe heat exchangers; 200 kWe heat exchanger articles; biofouling control;ammonia leak detection, and leak repair; rotating machinery; support subsystem; instrumentation and control; electrical subsystem; installation approach; net energy and resource analysis; and operability, maintainability, and safety are discussed. The conceptual design of the 40 MWe electrical power system includes four or five 10 MWe modules as designed for the 10 MWe pilot plant. (WHK)

  17. Guidelines for the design of a healing garden for the rehabilitation of psychiatric patients

    Directory of Open Access Journals (Sweden)

    Chantal Erbino

    2015-06-01

    Full Text Available Healing gardens are green spaces designed to promote and improve health and well-being for people suffering from illness. This paper proposes a methodology for defining a master plan for healing gardens. The methodology is based on site analysis (identification, limitations and potentials of the area and the evaluation of user needs (patients, staff, relatives. The aim of the master plan is to provide guidelines for the definition of the executive plan, and to set up a sufficiently flexible project suitable for future new categories of patients, according to the different needs of the regional health authorities. The methodology has been applied to a case study: this paper considers the design of the healing garden of a building named Villa Bianca, part of the wider complex of the clinic for mental disorders Villa di Salute located in Trofarello (in the province of Turin, Piedmont, Italy. The main kinds of disturbances treated at Villa di Salute are schizophrenia and personality disorders; there are also some patients with severe depression. At the present time the building and the garden of Villa Bianca are not being used and are undergoing renovation.

  18. Aerodynamic characteristics and design guidelines of push-pull ventilation systems.

    Science.gov (United States)

    Huang, R F; Lin, S Y; Jan, S-Y; Hsieh, R H; Chen, Y-K; Chen, C-W; Yeh, W-Y; Chang, C-P; Shih, T-S; Chen, C-C

    2005-01-01

    Aerodynamic characteristics such as the flow patterns, velocity field, streamline evolutions, characteristic flow modes and characteristic flow regimes of the push-pull ventilation system are cross-examined by using the laser-light sheet smoked-flow visualization method and laser Doppler velocimetry. Four characteristic flow modes, which are denoted as dispersion, transition, encapsulation and strong suction, are identified in the domain of the push-jet and pull-flow velocities at various open-surface tank widths and rising gas velocities. It is argued phenomenologically, from the aerodynamic point of view, that operating the system in the strong suction regime would be a better strategy than operating it in other characteristic regimes for the consideration of capture efficiency. Design guidelines are developed and summarized based on the results obtained from this study. The regression formulas for calculating the critical values of the push-jet and the pull-flow velocities are provided for easy access. The sulfur hexafluoride tracer gas validation technique is performed to measure the capture efficiency. The results of tracer gas validations are consistent with those obtained from the aerodynamic visualization and measurements. The operation points obtained by employing the American Conference of Governmental Industrial Hygienists design criteria are compared with the results obtained in this study for both the aerodynamics and the capture efficiency. Methods for improving the capture efficiency and energy consumptions are suggested.

  19. Hierarchical Modeling and Robust Synthesis for the Preliminary Design of Large Scale Complex Systems

    Science.gov (United States)

    Koch, Patrick N.

    1997-01-01

    Large-scale complex systems are characterized by multiple interacting subsystems and the analysis of multiple disciplines. The design and development of such systems inevitably requires the resolution of multiple conflicting objectives. The size of complex systems, however, prohibits the development of comprehensive system models, and thus these systems must be partitioned into their constituent parts. Because simultaneous solution of individual subsystem models is often not manageable iteration is inevitable and often excessive. In this dissertation these issues are addressed through the development of a method for hierarchical robust preliminary design exploration to facilitate concurrent system and subsystem design exploration, for the concurrent generation of robust system and subsystem specifications for the preliminary design of multi-level, multi-objective, large-scale complex systems. This method is developed through the integration and expansion of current design techniques: Hierarchical partitioning and modeling techniques for partitioning large-scale complex systems into more tractable parts, and allowing integration of subproblems for system synthesis; Statistical experimentation and approximation techniques for increasing both the efficiency and the comprehensiveness of preliminary design exploration; and Noise modeling techniques for implementing robust preliminary design when approximate models are employed. Hierarchical partitioning and modeling techniques including intermediate responses, linking variables, and compatibility constraints are incorporated within a hierarchical compromise decision support problem formulation for synthesizing subproblem solutions for a partitioned system. Experimentation and approximation techniques are employed for concurrent investigations and modeling of partitioned subproblems. A modified composite experiment is introduced for fitting better predictive models across the ranges of the factors, and an approach for

  20. Design of an interactive medical guideline application for community health workers.

    Science.gov (United States)

    Karlen, Walter; Scheffer, Cornie

    2014-01-01

    Clinical guidelines, such as the Integrated Management of Childhood Illness (IMCI), are used worldwide to support community health workers in the assessment of severely ill children. These guidelines are distributed in paper form, complicating their use at the point-of-care. We have developed a framework for building advanced clinical guideline applications for the Android mobile phone OS. The framework transfers clinical guidelines into a flexible and interactive electronic format using an XML interpreter. The resulting application supports intuitive navigation of guidelines while assessing the patient, easy integration of patient management tools, and logging of performed assessments and treatments. The novel approach transforms clinical guidelines from a mere paper dictionary into a working tool that integrates into the daily workflow of community health workers and simplifies their task at the care and administrative levels.

  1. Clinical trial designs of new medicinal products for treating schizophrenia: discussion of EMA's Guideline and a Better Long Term Trial Design

    Directory of Open Access Journals (Sweden)

    Haibiao Jiang

    Full Text Available Background and Objectives: Schizophrenia is a severe chronic disease. Endpoint variables lack objectivity and the diagnostic criteria have evolved with time. In order to guide the development of new drugs, European Medicines Agency (EMA issued a guideline on the clinical investigation of medicinal products for the treatment of schizophrenia. Methods: Authors reviewed and discussed the efficacy trial part of the Guideline. Results: The Guideline divides clinical efficacy trials into short-term trials and long-term trials. The short-term three-arm trial is recommended to replace the short-term two-arm active-controlled non-inferiority trial because the latter has sensitivity issues. The Guideline ultimately makes that three-arm trial a superiority trial. The Guideline discusses four types of long-term trial designs. The randomized withdrawal trial design has some disadvantages. Long-term two-arm active-controlled non-inferiority trial is not recommended due to the sensitivity issue. Extension of the short-term trial is only suitable for extension of the short-term two-arm active-controlled superiority trial. The Guideline suggests that a hybrid design of a randomized withdrawal trial incorporated into a long-term parallel trial might be optimal. However, such a design has some disadvantages and might be too complex to be carried out. Authors suggest instead a three-group long-term trial design, which could provide comparison between test drug and active comparator along with comparison between the test drug and placebo. This alternative could arguably be much easier to carry out compared with the hybrid design. Conclusions: The three-group long-term design merits further discussion and evaluation.

  2. Power system development: Ocean Thermal Energy Conversion (OTEC). Preliminary design report: appendices, Part 2 (Final)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-04

    The objective of this project is the development of a preliminary design for a full-sized, closed cycle, ammonia power system module for the 100 MWe OTEC demonstration plant. In turn, this demonstration plant is to demonstrate, by 1984, the operation and performance of an Ocean Thermal Power Plant having sufficiently advanced heat exchanger design to project economic viability for commercial utilization in the late 1980's and beyond. Included in this power system development are the preliminary designs for a proof-of-concept pilot plant and test article heat exchangers which are scaled in such a manner as to support a logically sequential, relatively low-cost development of the full-scale power system module. The conceptual designs are presented for the demonstration plant power module, the proof-of-concept pilot plant, and for a pair of test article heat exchangers. Costs associated with the design, development, fabrication, checkout, delivery, installation, and operation are included. The accompanying design and producibilty studies on the full-scale power system module project the performance/economics for the commercial plant. This section of the report contains appendices on the electrical system, instrumentation and control, ammonia pump evaluation study, ammonia and nitrogen support subsystems, piping and support design calculations, and plant availability. (WHK)

  3. Preliminary Reactor Head Bolt Design of Prototype Sodium-cooled Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Han, Insu; Koo, Gyeonghoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    As structural requirements, the reactor head is designed to withstand all of the pressure, temperatures and forces which are likely to be imposed on it. The bolts that fasten the head to the vessel flange. Design of the reactor head bolts so as to withstand the loads applied should be designed. Currently, preliminary design of the PGSFR reactor bolts is progressed. So far, we have designed and evaluated example. The number and cross-sectional areas of bolts were determined using the procedure given in ASME BPVC Section III, Division 1, Appendix E. The purpose of this study is to conduct design the number and cross-sectional area of bolts attaching the PGSFR reactor head to the reactor vessel, using the ASME procedure. In this paper, preliminary bolt design for PGSFR was carried out according to the ASME procedure. Detailed calculations were carried out for bolt root diameter = 80 mm and number of bolts Nb = 45. It should be noted that the seating pressure recommended in the ASME code is only a suggested value, not mandatory appendix E. It does not guarantee a leak-tight joint. So these quantities are needed to carry out fatigue analysis of the bolts and to assure leak tightness of the joint during operation. For the future work, the fatigue and seismic analysis will be performed.

  4. SLUDGE TREATMENT PROJECT ENGINEERED CONTAINER RETRIEVAL AND TRANSFER SYSTEM PRELIMINARY DESIGN HAZARD ANALYSIS SUPPLEMENT 1

    Energy Technology Data Exchange (ETDEWEB)

    FRANZ GR; MEICHLE RH

    2011-07-18

    This 'What/If' Hazards Analysis addresses hazards affecting the Sludge Treatment Project Engineered Container Retrieval and Transfer System (ECRTS) NPH and external events at the preliminary design stage. In addition, the hazards of the operation sequence steps for the mechanical handling operations in preparation of Sludge Transport and Storage Container (STSC), disconnect STSC and prepare STSC and Sludge Transport System (STS) for shipping are addressed.

  5. Preliminary Failure Modes and Effects Analysis of the US Massive Gas Injection Disruption Mitigation System Design

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2013-10-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a candidate design for the ITER Disruption Mitigation System. This candidate is the Massive Gas Injection System that provides machine protection in a plasma disruption event. The FMEA was quantified with “generic” component failure rate data as well as some data calculated from operating facilities, and the failure events were ranked for their criticality to system operation.

  6. Preliminary design of a public transportation system to support a theme park

    OpenAIRE

    Malacane, Christine Ann

    1994-01-01

    The purpose of this project was to develop the preliminary design of a public transportation system (PTS) that would support a theme park. Disney's America, a theme park originally planned for Northern Virginia, was used as the basis for this project. The problem was that the primary interstate that serves the park site was already overcrowded; this project was intended to expand the realm of possible transportation solutions to include public-transit solutions. The following report identi...

  7. Design challenges and guidelines for free-space optical communication links using orbital-angular-momentum multiplexing of multiple beams

    Science.gov (United States)

    Willner, Alan E.; Xie, Guodong; Li, Long; Ren, Yongxiong; Yan, Yan; Ahmed, Nisar; Zhao, Zhe; Wang, Zhe; Liu, Cong; Willner, Asher J.; Ashrafi, Nima; Ashrafi, Solyman; Tur, Moshe; Molisch, Andreas F.

    2016-07-01

    In this paper, recent studies on the potential challenges for an orbital angular momentum (OAM) multiplexing system were reviewed. The design guideline for a practical OAM multiplexing system were investigated in term of (i) the power loss due to the beam divergence and limited-size receiver, and (ii) the channel crosstalk due to the misalignment between the transmitter and receiver.

  8. Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume 5. Background Literature

    Science.gov (United States)

    1981-02-01

    irical reisearch has neon done--the guidelines can be more specific and prescriptive. .Althoulh it is f.a<si-le to construct a design guide for...information systems Donerty, W.J., Thompson, C.M., Interactive systems--functions, & Boies , S.d., 1972 software, linguistics, scheduling Kennedy, T.C.S

  9. Guideline for service life design of structural concrete. A performance based approach with regard to chloride induced corrosion

    NARCIS (Netherlands)

    Wegen, G. van der; Polder, R.B.; Breugel, K. van

    2012-01-01

    Nowadays major structures require a service life of 100 years or even more. CUR committee VC81 has developed a guideline for service life design based on initiation of corrosion due to chloride penetration for exposure classes XD or XS. A semi-probabilistic simplification of the DuraCrete methodolog

  10. Guideline for service life design of structural concrete: A performance based approach with regard to chloride induced corrosion

    NARCIS (Netherlands)

    Wegen, G. Van der; Polder, R.B.; Breugel, K. Van

    2012-01-01

    Nowadays major structures require a service life of 100 years or even more. CUR committee VC81 has developed a guideline for service life design based on initiation of corrosion due to chloride penetration for exposure classes XD or XS. A semi-probabilistic simplification of the DuraCrete methodolog

  11. Preliminary design of an advanced Stirling system for terrestrial solar energy conversion

    Science.gov (United States)

    White, M. A.; Noble, J. E.; Emigh, S. G.; Ross, B. A.; Lehmann, G. A.

    1990-01-01

    A preliminary design was generated for an advanced Stirling conversion system (ASCS) that will be capable of delivering about 25 kW of electric power to an electric utility grid. Stirling engines are being evaluated for terrestrial solar applications. A two-year task to complete detailed design, fabrication, assembly and testing of an ASCS prototype began in April, 1990. The ASCS is designed to deliver maximum power per year over a range of solar inputs with a design life of 30 years (60,000 h). The ACSC has a long-term cost goal of about $450 per kilowatt, exclusive of the 11-m parabolic dish concentrator. The proposed system includes a Stirling engine with high-pressure hydraulic output, coupled with a bent axis variable displacement hydraulic motor and a rotary induction generator. The major thrusts of the preliminary design are described, including material selection for the hot-end components, heat transport system (reflux pool boiler) design, system thermal response, improved manufacturability, FMECA/FTA analysis, updated manufacturing cost estimate, and predicted system performance.

  12. Development of an Exploration-Class Cascade Distillation System: Flight Like Prototype Preliminary Design

    Science.gov (United States)

    Callahan, Michael R.; Sargusingh, Miriam J.

    2015-01-01

    The ability to recover and purify water through physiochemical processes is crucial for realizing long-term human space missions, including both planetary habitation and space travel. Because of their robust nature, distillation systems have been actively pursued as one of the technologies for water recovery. One such technology is the Cascade Distillation System (CDS) a multi-stage vacuum rotary distiller system designed to recover water in a microgravity environment. Its rotating cascading distiller operates similarly to the state of the art (SOA) vapor compressor distiller (VCD), but its control scheme and ancillary components are judged to be straightforward and simpler to implement into a successful design. Through the Advanced Exploration Systems (AES) Life Support Systems (LSS) Project, the NASA Johnson Space Center (JSC) in collaboration with Honeywell International is developing a second generation flight forward prototype (CDS 2.0). The key objectives for the CDS 2.0 design task is to provide a flight forward ground prototype that demonstrates improvements over the SOA system in the areas of increased reliability and robustness, and reduced mass, power and volume. It will also incorporate exploration-class automation. The products of this task are a preliminary flight system design and a high fidelity prototype of an exploration class CDS. These products will inform the design and development of the third generation CDS which is targeted for on-orbit DTO. This paper details the preliminary design of the CDS 2.0.

  13. Preliminary Design Report of Fluid System of PDRC Performance Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae-Ho; Eoh, Jae-Hyuk; Seong, Seung-Hwan; Han, Ji-Woong; Choi, Byoung-Hae; Kim, Seong-O

    2008-10-15

    PDRC (Passive Decay Heat Removal Circuit) is a safety grade passive residual heat removal system of KALIMER-600. In order to assess the long- and short-term cooling capabilities of PDRC and produce the experimental data for the verification of the performance and safety analysis codes, PDRC performance test was planned for. In this study, the overall design requirements and the preliminary design data for the fluid system of test facility are presented. The fluid system of the facility is composed of the primary heat transport system, the PDRC, the IHX air cooling system and the sodium supply/purification system. The preliminarily designed facility is scaled-down to 1/4 for length, 1/400 for volume from the primary heat transport system and the PDRC of KALIMER-600 based on a reliable scaling method. It can simulate the cooling of primary heat transport system for the full temperature condition in case of the reactor and pump trips. The produced preliminary design data will be used in the future as the basic information for a detailed design, an establishment of experimental requirement and an assessment of the appropriateness of facility design.

  14. Preliminary Design of Large Scale Sodium Thermal-Hydraulic Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae Ho; Kim, Tae Joon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Lee, Jae Han; Jeong, Ji Young; Park, Su Ki; Han, Ji Woong; Yoo, Yong Hwan; Lee, Yong Bum [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    A large scale sodium thermal-hydraulic test facility is being designed for verification of the advanced design concept of the passive decay heat removal circuit (PDRC) in a medium- or large-sized pool-type SFR. In the test, its cooling capability during the long- and short-term periods after the reactor trip will be evaluated, and also the produced experimental data will be utilized for the assessment and verification of the safety and performance analysis codes. Starting with the preliminary design of the test facility this year using KALIMER-600 as a reference reactor, the basic and the detailed designs will be made through 2011-2012 based on the demonstration reactor which is intended to be constructed by 2028 according to a long-term national SFR development plan. The installation is scheduled to be completed by the end of 2013, and the main experiments will commence from 2015 after the startup test in 2014. This paper briefly introduces the preliminary design features which were produced as a first step to assess the appropriateness of the facility design methodology.

  15. Integration of educational methods and physical settings: design guidelines for High/Scope methodology in pre-schools

    Directory of Open Access Journals (Sweden)

    Shirin Izadpanah

    2014-06-01

    Full Text Available Quality design and appropriate space organization in preschool settings can support preschool children's educational activities. Although the relationship between the well-being and development of children and physical settings has been emphasized by many early childhood researchers, there is still a need for theoretical design guidelines that are geared towards the improvement of this issue. This research focuses on High/Scope education and aims to shape a theoretical guideline that raises teachers' awareness about the potential of learning spaces and guides them to improve the quality of the physical spaces. To create a theoretical framework, reliable sources are investigated in the light of High/Scope education and the requirements of pre-school children educational spaces. Physical space characteristics, the preschool child's requirements and High/Scope methodology identified design inputs, design considerations and recommendations that shape the final guideline for spatial arrangement in a High/Scope setting are integrated. Discussions and suggestions in this research benefit both designers and High/ Scope teaching staff. Results help High/Scope teaching staff increase the quality of a space in an educational setting without having an architectural background. The theoretical framework of the research allows designers to consider key features and users' possible activities in High/ Scope settings and shape their designs accordingly.

  16. A Framework for Preliminary Design of Aircraft Structures Based on Process Information. Part 1

    Science.gov (United States)

    Rais-Rohani, Masoud

    1998-01-01

    This report discusses the general framework and development of a computational tool for preliminary design of aircraft structures based on process information. The described methodology is suitable for multidisciplinary design optimization (MDO) activities associated with integrated product and process development (IPPD). The framework consists of three parts: (1) product and process definitions; (2) engineering synthesis, and (3) optimization. The product and process definitions are part of input information provided by the design team. The backbone of the system is its ability to analyze a given structural design for performance as well as manufacturability and cost assessment. The system uses a database on material systems and manufacturing processes. Based on the identified set of design variables and an objective function, the system is capable of performing optimization subject to manufacturability, cost, and performance constraints. The accuracy of the manufacturability measures and cost models discussed here depend largely on the available data on specific methods of manufacture and assembly and associated labor requirements. As such, our focus in this research has been on the methodology itself and not so much on its accurate implementation in an industrial setting. A three-tier approach is presented for an IPPD-MDO based design of aircraft structures. The variable-complexity cost estimation methodology and an approach for integrating manufacturing cost assessment into design process are also discussed. This report is presented in two parts. In the first part, the design methodology is presented, and the computational design tool is described. In the second part, a prototype model of the preliminary design Tool for Aircraft Structures based on Process Information (TASPI) is described. Part two also contains an example problem that applies the methodology described here for evaluation of six different design concepts for a wing spar.

  17. Designing and Building Integrated Digital Library Systems: Guidelines. IFLA Professional Reports, No. 90

    Science.gov (United States)

    Rathje, Bente Dahl; McGrory, Margaret; Pollitt, Carol; Voutilainen, Paivi

    2005-01-01

    The purpose of these Guidelines is to provide libraries for the blind and those who work in them with a broad overview of matters to be considered in planning and implementing an integrated digital library system. The Guidelines are not intended to provide technical solutions. Given the pace of technological change, solutions can only be developed…

  18. Preliminary design study of a quiet, high flow fan (QHF) stage. [turbofans - quiet engine program

    Science.gov (United States)

    Walker, C. L.; Kisner, L. S.; Delaney, R. A.; Beguhn, A. A.; Frye, D. E.

    1974-01-01

    Concepts selected to reduce fan generated noise in a turbofan are presented. Near-sonic flow at the fan inlet to reduce upstream propagated noise and the use of long-chord vanes to reduce downstream noise is discussed. The near-sonic condition at the rotor inlet plane was achieved by designing for high specific mass flow and by maintaining the high flow at reduced power by variable stators and variable fan exhaust nozzle. The long-chord vanes reduce response to unsteady flow. The acoustic design showed that long-chord stators would significantly reduce turbofan source noise and that other stator design parameters have no appreciable effect on noise for the spacing and chord length of the turbofan design. Four rig flow paths studied in the aerodynamic preliminary design are discussed. Noise prediction results indicate that a turbofan powered aircraft would be under federal air regulations levels without any acoustic treatment.

  19. Preliminary design package for residential heating/cooling system--Rankine air conditioner redesign

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    This report contains a summary of the preliminary redesign and development of a marketable single-family heating and cooling system. The objectives discussed are the interim design and schedule status of the Residential (3-ton) redesign, problem areas and solutions, and the definition of plans for future design and development activities. The proposed system for a single-family residential heating and cooling system is a single-loop, solar-assisted, hydronic-to-warm-air heating subsystem with solar-assisted domestic water heating and a Rankine-driven expansion air-conditioning subsystem.

  20. Design and preliminary results of a fuel flexible industrial gas turbine combustor

    Science.gov (United States)

    Novick, A. S.; Troth, D. L.; Yacobucci, H. G.

    1981-01-01

    The design characteristics are presented of a fuel tolerant variable geometry staged air combustor using regenerative/convective cooling. The rich/quench/lean variable geometry combustor is designed to achieve low NO(x) emission from fuels containing fuel bound nitrogen. The physical size of the combustor was calculated for a can-annular combustion system with associated operating conditions for the Allison 570-K engine. Preliminary test results indicate that the concept has the potential to meet emission requirements at maximum continuous power operation. However, airflow sealing and improved fuel/air mixing are necessary to meet Department of Energy program goals.

  1. Design and preliminary results of a fuel flexible industrial gas turbine combustor

    Science.gov (United States)

    Novick, A. S.; Troth, D. L.; Yacobucci, H. G.

    1981-01-01

    The design characteristics are presented of a fuel tolerant variable geometry staged air combustor using regenerative/convective cooling. The rich/quench/lean variable geometry combustor is designed to achieve low NO(x) emission from fuels containing fuel bound nitrogen. The physical size of the combustor was calculated for a can-annular combustion system with associated operating conditions for the Allison 570-K engine. Preliminary test results indicate that the concept has the potential to meet emission requirements at maximum continuous power operation. However, airflow sealing and improved fuel/air mixing are necessary to meet Department of Energy program goals.

  2. Heat recovery and seed recovery development project: preliminary design report (PDR)

    Energy Technology Data Exchange (ETDEWEB)

    Arkett, A. H.; Alexander, K. C.; Bolek, A. D.; Blackman, B. K.; Kurrle, P. E.; Tram, S. V.; Warren, A. M.; Ziobrowski, A. J.

    1981-06-01

    The preliminary design and performance characteristics are described of the 20 MWt heat recovery and seed recovery (HRSR) system to be fabricated, installed, and evaluated to provide a technological basis for the design of commercial size HRSR systems for coal-fired open-cycle MHD power plants. The system description and heat and material balances, equipment description and functional requirements, controls, interfacing systems, and operation and maintenance are detailed. Appendices include: (1) recommended environmental requirements for compliance with federal and state of Tennessee regulations, (2) channel and diffuser simulator, (3) equipment arrangement drawings, and (4) channel and diffuser simulator barrel drawings. (WHK)

  3. Preliminary design package for residential heating/cooling system: Rankine air conditioner redesign

    Science.gov (United States)

    1978-01-01

    A summary of the preliminary redesign and development of a marketable single family heating and cooling system is presented. The interim design and schedule status of the residential (3-ton) redesign, problem areas and solutions, and the definition of plans for future design and development activities were discussed. The proposed system for a single-family residential heating and cooling system is a single-loop, solar-assisted, hydronic-to-warm-air heating subsystem with solar-assisted domestic water heating and a Rankine-driven expansion air-conditioning subsystem.

  4. Radial phononic thermal conductance in thin membranes in the Casimir limit: Design guidelines for devices

    Science.gov (United States)

    Puurtinen, T. A.; Maasilta, I. J.

    2014-12-01

    In a previous publication [I. J. Maasilta, AIP Advances 1, 041704 (2011)], we discussed the formalism and some computational results for phononic thermal conduction in the suspended membrane geometry for radial heat flow from a central source, which is a common geometry for some low-temperature detectors, for example. We studied the case where only diffusive surface scattering is present, the so called Casimir limit, which can be experimentally relevant at temperatures below ˜ 10 K in typical materials, and even higher for ultrathin samples. Here, we extend our studies to much thinner membranes, obtaining numerical results for geometries which are more typical in experiments. In addition, we interpret the results in terms of the small signal and differential thermal conductance, so that guidelines for designing devices, such as low-temperature bolometric detectors, are more easily obtained. Scaling with membrane dimensions is shown to differ significantly from the bulk scattering, and, in particular, thinning the membrane is shown to lead to a much stronger reduction in thermal conductance than what one would envision from the simplest bulk formulas.

  5. Radial phononic thermal conductance in thin membranes in the Casimir limit: Design guidelines for devices

    Directory of Open Access Journals (Sweden)

    T. A. Puurtinen

    2014-12-01

    Full Text Available In a previous publication [I. J. Maasilta, AIP Advances 1, 041704 (2011], we discussed the formalism and some computational results for phononic thermal conduction in the suspended membrane geometry for radial heat flow from a central source, which is a common geometry for some low-temperature detectors, for example. We studied the case where only diffusive surface scattering is present, the so called Casimir limit, which can be experimentally relevant at temperatures below ∼ 10 K in typical materials, and even higher for ultrathin samples. Here, we extend our studies to much thinner membranes, obtaining numerical results for geometries which are more typical in experiments. In addition, we interpret the results in terms of the small signal and differential thermal conductance, so that guidelines for designing devices, such as low-temperature bolometric detectors, are more easily obtained. Scaling with membrane dimensions is shown to differ significantly from the bulk scattering, and, in particular, thinning the membrane is shown to lead to a much stronger reduction in thermal conductance than what one would envision from the simplest bulk formulas.

  6. Designing a guideline for selecting a supplier for an agile fixed budget & resource contract in the public sector

    DEFF Research Database (Denmark)

    Pries-Heje, Lene; Pries-Heje, Jan

    2014-01-01

    ; you need a more flexible way to develop IS. A new way of coping with many changes is to use an agile development approach and a fixed budget and resources contract. Thus instead of specifying requirements for functionality you specify requirements for resources; capabilities for the team...... and the technical support structure. This paper presents a case where that was done. We analyse the case using the iron triangle for projects as our theoretical lens and design a guideline for how to implement a fixed budget and resources contract in the public sector. The guideline includes elements to cope...

  7. Shelters for archaeological sites in Serbia: A research aiming to develop guidelines for future design and construction

    OpenAIRE

    2015-01-01

    Between the years 2003. and 2013. the Republic of Serbia allocated in its own budgets around one billion dinars for designing and construction of shelters on archaeological sites. This paper researches the main factors for decision making on different levels, resulting in certain designs and construction solutions, but in numerous problems also. Based on all so far performed works and their results, the general guidelines applicable to the range of professi...

  8. The Spatial Vision Tree: A Generic Pattern Recognition Engine- Scientific Foundations, Design Principles, and Preliminary Tree Design

    Science.gov (United States)

    Rahman, Zia-ur; Jobson, Daniel J.; Woodell, Glenn A.

    2010-01-01

    New foundational ideas are used to define a novel approach to generic visual pattern recognition. These ideas proceed from the starting point of the intrinsic equivalence of noise reduction and pattern recognition when noise reduction is taken to its theoretical limit of explicit matched filtering. This led us to think of the logical extension of sparse coding using basis function transforms for both de-noising and pattern recognition to the full pattern specificity of a lexicon of matched filter pattern templates. A key hypothesis is that such a lexicon can be constructed and is, in fact, a generic visual alphabet of spatial vision. Hence it provides a tractable solution for the design of a generic pattern recognition engine. Here we present the key scientific ideas, the basic design principles which emerge from these ideas, and a preliminary design of the Spatial Vision Tree (SVT). The latter is based upon a cryptographic approach whereby we measure a large aggregate estimate of the frequency of occurrence (FOO) for each pattern. These distributions are employed together with Hamming distance criteria to design a two-tier tree. Then using information theory, these same FOO distributions are used to define a precise method for pattern representation. Finally the experimental performance of the preliminary SVT on computer generated test images and complex natural images is assessed.

  9. Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    Westinghouse has completed the Preliminary Design Phase for the Power System Development of the Ocean Thermal Energy Conversion (OTEC) Demonstration Plant project. This study included the development of a preliminary design for a Modular Application scaled power system (10MWe) and Heat Exchanger Test Articles, both based on the concept developed in the Conceptual Design Phase. The results of this study were used to improve the baseline design of the 50MWe module for the Commercial Size Power System, which was recommended for the demonstration plant by the conceptual design study. The 50MWe module was selected since it has the lowest cost, and since its size convincingly demonstrates that future economically viable commercial plants, having reliable operation with credible anticipated costs, are possible. Additional optimization studies on the size of the power system plus hull continue to identify 50MWe as the preferred minimum cost configuration. This study was limited to a closed cycle ammonia power system module, using a seawater temperature difference of 40/sup 0/F, and a surface platform/ship reference hull. This volume describes system operation, a complete test program to verify mechanical reliability and thermal performance, fabrication and installation operations, and a cost analysis. (WHK)

  10. The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

    Science.gov (United States)

    Mulqueen, Jack; Jones, David; Hopkins, Randy

    2011-01-01

    This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

  11. Preliminary design of a high speed civil transport: The Opus 0-001

    Science.gov (United States)

    1992-01-01

    Based on research into the technology and issues surrounding the design, development, and operation of a second generation High Speed Civil Transport, HSCT, the Opus 0-001 team completed the preliminary design of a sixty passenger, three engine aircraft. The design of this aircraft was performed using a computer program which the team wrote. This program automatically computed the geometric, aerodynamic, and performance characteristic of an aircraft whose preliminary geometry was specified. The Opus 0-001 aircraft was designed for a cruise Mach number of 2.2, a range of 4,700 nautical miles and its design was based in current or very near term technology. Its small size was a consequence of an emphasis on a profitable, low cost program, capable of delivering tomorrow's passengers in style and comfort at prices that make it an attractive competitor to both current and future subsonic transport aircraft. Several hundred thousand cases of Cruise Mach number, aircraft size and cost breakdown were investigated to obtain costs and revenues for which profit was calculated. The projected unit flyaway cost was $92.0 million per aircraft.

  12. An Informational Model as a Guideline to Design Sustainable Green SLA (GSLA

    Directory of Open Access Journals (Sweden)

    Iqbal Ahmed

    2016-04-01

    Full Text Available Recently, Service Level Agreement (SLA and green SLA (GSLA becomes very important for both the service providers/vendors and as well as for the users/customers. There are many ways to inform users/customers about various services with its inherent execution functionalities and even non-functional/Quality of Service (QoS aspects through SLAs. However, these basic SLAs actually do not cover eco-efficient green issues or IT ethics issues for sustainable development. That is why green SLA (GSLA already came into play for achieving sustainability in the industry. Nevertheless, the current practice of GSLA in the industry do not respect the sustainability at all. GSLA defined as a formal agreement incorporating all the traditional commitments respecting some green computing parameters such as carbon footprint, energy consumption etc. Therefore, there are still gaps for achieving sustainability through existing GSLA. To reach the goal of achieving sustainability and getting more customers, many IT (Information Technology and ICT (Information and Communication Technology business are looking for a real GSLA which would meet the ecological, economical and ethical aspects (3Es of sustainability. This research discovers the missing parameters and introduce new parameters under sustainability hoods. In addition, it defines GSLA of sustainability with new green performance indicators and their measurable units. It also discovers the management complexity of proposed new GSLA through designing a general informational model and identifies various new entities and their effects with other entities under three pillars of sustainability. The ICT engineer could use the informational model as a guideline to design a sustainable GSLA for the industry. Therefore, the proposed model could help different service providers/vendors to define their future business strategies for the upcoming sustainable society.

  13. Preliminary guidelines for safe and effective use of repetitive transcranial magnetic stimulation in moderate to severe traumatic brain injury.

    Science.gov (United States)

    Nielson, Dylan M; McKnight, Curtis A; Patel, Riddhi N; Kalnin, Andrew J; Mysiw, Walter J

    2015-04-01

    Transcranial magnetic stimulation has generated extensive interest within the traumatic brain injury (TBI) rehabilitation community, but little work has been done with repetitive protocols, which can produce prolonged changes in behavior. This is partly because of concerns about the safety of repetitive transcranial magnetic stimulation (rTMS) in subjects with TBI, particularly the risk of seizures. These risks can be minimized by careful selection of the rTMS protocol and exclusion criteria. In this article, we identify guidelines for safe use of rTMS in subjects with TBI based on a review of the literature and illustrate their application with a case study. Our subject is a 48-year-old man who sustained a severe TBI 5 years prior to beginning rTMS for the treatment of post-TBI depression. After a 4-week baseline period, we administered daily sessions of low-frequency stimulation to the right dorsolateral prefrontal cortex for 6 weeks. After stimulation, we performed monthly assessments for 3 months. The Hamilton Depression Rating Scale (HAMD) was our primary outcome measure. The stimulation was well tolerated and the patient reported no side effects. After 6 weeks of stimulation, the patient's depression was slightly improved, and these improvements continued through follow-up. At the end of follow-up, the patient's HAMD score was 49% of the average baseline score.

  14. Utilizing the ECHO Model in the Veterans Health Affairs System: Guidelines for Setup, Operations and Preliminary Findings

    Directory of Open Access Journals (Sweden)

    Herschel Knapp

    2015-06-01

    Full Text Available Background: In 2011, the Veterans Health Administration (VHA consulted with the Project ECHO (Extension for Community Healthcare Outcomes team at the University of New Mexico, Albuquerque, to reproduce their successful model within the VHA. Methods: The VHA launched SCAN-ECHO (Specialty Care Access Network-Extension for Community Healthcare Outcomes, a multisite videoconferencing system to conduct live clinical consultations between specialists at a VHA Medical Center (hospital and primary care providers stationed at satellite VHA CBOCs (Community-Based Outpatient Clinic. Results: Analysis of the first three years rendered a mean attendee satisfaction of 89.53% and a consultation satisfaction score of 88.10%. About half of the SCAN-ECHO consultations resulted in patients receiving their treatment from their local primary care providers; the remaining half were referred to the VHA Medical Center when the treatment involved equipment or services not available at the CBOCs (e.g., MRI, surgery. Conclusion: This paper details the setup, operation logistics and preliminary findings, suggesting that SCAN-ECHO is a viable model for providing quality specialty clinical consultation service, prompter access to care, reduced commutes and continuing education. Additionally, the use of a secured Internet-based videoconferencing system that supports connectivity to multiple (mobile devices could expand the utilization of this service.

  15. Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design.

    Science.gov (United States)

    Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

    2015-02-28

    The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms.

  16. Preliminary design and thermal analysis of device for finish cooling Jaffa biscuits in a.d. 'Jaffa'- Crvenka

    Directory of Open Access Journals (Sweden)

    Salemović Duško R.

    2015-01-01

    Full Text Available In this paper preliminary design of device for finish cooling chocolate topping of biscuits in A.D. 'Jaffa'- Crvenka was done. The proposed preliminary design followed by the required technological process of finish cooling biscuits and required parameters of process which was supposed to get and which represented part of project task. Thermal analysis was made and obtained percentage error between surface contact of the air and chocolate topping, obtained from heat balance and geometrical over proposed preliminary design, wasn't more than 0.67%. This is a preliminary design completely justified because using required length of belt conveyor receive required temperature of chocolate topping at the end of the cooling process.

  17. Duct injection for SO{sub 2} control, Design Handbook, Volume 1, Process design and engineering guidelines

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    PETC developed a comprehensive program of coal-related, acid-rain research and development with a major activity area centering on flue gas cleanup and control of SO{sub 2} emissions. Particular emphasis was placed on the retrofit measures for older coal-fired power plants which predate the 1971 New Source Performance Standards. Candidate emission control technologies fall into three categories, depending upon their point of application along the fuel path (i.e., pre, during, or post combustion). The post-combustion, in-duct injection of a calcium-based chemical reagent seemed promising. Preliminary studies showed that reagent injection between the existing air heater and electrostatic precipitator (ESP) could remove between 50-60% of the SO{sub 2} and produce an environmentally safe, dry, solid waste that is easily disposed. Although SO{sub 2} removal efficiencies were less, the estimated capital costs for duct injection technology were low making the economics of duct injection systems seem favorable when compared to conventional wet slurry scrubbers under certain circumstances. With the promulgation of the Clean Air Act Amendments of 1990 came more incentive for the development of low capital cost flue gas desulfurization (FGD) processes. A number of technical problems had to be resolved, however, before duct injection technology could be brought to a state of commercial readiness. The Duct Injection Technology Development Program was launched as a comprehensive, four-year research effort undertaken by PETC to develop this new technology. Completed in 1992, this Duct Injection Design Handbook and the three-dimensional predictive mathematical model constitute two primary end products from this development program. The aim of this design handbook and the accompanying math model is to provide utility personnel with sufficient information to evaluate duct injection technology against competing SO{sub 2} emissions reduction strategies for an existing plant.

  18. The Square Kilometre Array Science Data Processor. Preliminary compute platform design

    Science.gov (United States)

    Broekema, P. C.; van Nieuwpoort, R. V.; Bal, H. E.

    2015-07-01

    The Square Kilometre Array is a next-generation radio-telescope, to be built in South Africa and Western Australia. It is currently in its detailed design phase, with procurement and construction scheduled to start in 2017. The SKA Science Data Processor is the high-performance computing element of the instrument, responsible for producing science-ready data. This is a major IT project, with the Science Data Processor expected to challenge the computing state-of-the art even in 2020. In this paper we introduce the preliminary Science Data Processor design and the principles that guide the design process, as well as the constraints to the design. We introduce a highly scalable and flexible system architecture capable of handling the SDP workload.

  19. 1972 preliminary safety analysis report based on a conceptual design of a proposed repository in Kansas

    Energy Technology Data Exchange (ETDEWEB)

    Blomeke, J.O.

    1977-08-01

    This preliminary safety analysis report is based on a proposed Federal Repository at Lyons, Kansas, for receiving, handling, and depositing radioactive solid wastes in bedded salt during the remainder of this century. The safety analysis applies to a hypothetical site in central Kansas identical to the Lyons site, except that it is free of nearby salt solution-mining operations and bore holes that cannot be plugged to Repository specifications. This PSAR contains much information that also appears in the conceptual design report. Much of the geological-hydrological information was gathered in the Lyons area. This report is organized in 16 sections: considerations leading to the proposed Repository, design requirements and criteria, a description of the Lyons site and its environs, land improvements, support facilities, utilities, different impacts of Repository operations, safety analysis, design confirmation program, operational management, requirements for eventually decommissioning the facility, design criteria for protection from severe natural events, and the proposed program of experimental investigations. (DLC)

  20. Research Initiatives and Preliminary Results In Automation Design In Airspace Management in Free Flight

    Science.gov (United States)

    Corker, Kevin; Lebacqz, J. Victor (Technical Monitor)

    1997-01-01

    The NASA and the FAA have entered into a joint venture to explore, define, design and implement a new airspace management operating concept. The fundamental premise of that concept is that technologies and procedures need to be developed for flight deck and ground operations to improve the efficiency, the predictability, the flexibility and the safety of airspace management and operations. To that end NASA Ames has undertaken an initial development and exploration of "key concepts" in the free flight airspace management technology development. Human Factors issues in automation aiding design, coupled aiding systems between air and ground, communication protocols in distributed decision making, and analytic techniques for definition of concepts of airspace density and operator cognitive load have been undertaken. This paper reports the progress of these efforts, which are not intended to definitively solve the many evolving issues of design for future ATM systems, but to provide preliminary results to chart the parameters of performance and the topology of the analytic effort required. The preliminary research in provision of cockpit display of traffic information, dynamic density definition, distributed decision making, situation awareness models and human performance models is discussed as they focus on the theme of "design requirements".

  1. Research Initiatives and Preliminary Results In Automation Design In Airspace Management in Free Flight

    Science.gov (United States)

    Corker, Kevin; Lebacqz, J. Victor (Technical Monitor)

    1997-01-01

    The NASA and the FAA have entered into a joint venture to explore, define, design and implement a new airspace management operating concept. The fundamental premise of that concept is that technologies and procedures need to be developed for flight deck and ground operations to improve the efficiency, the predictability, the flexibility and the safety of airspace management and operations. To that end NASA Ames has undertaken an initial development and exploration of "key concepts" in the free flight airspace management technology development. Human Factors issues in automation aiding design, coupled aiding systems between air and ground, communication protocols in distributed decision making, and analytic techniques for definition of concepts of airspace density and operator cognitive load have been undertaken. This paper reports the progress of these efforts, which are not intended to definitively solve the many evolving issues of design for future ATM systems, but to provide preliminary results to chart the parameters of performance and the topology of the analytic effort required. The preliminary research in provision of cockpit display of traffic information, dynamic density definition, distributed decision making, situation awareness models and human performance models is discussed as they focus on the theme of "design requirements".

  2. Seismic design and evaluation guidelines for the Department of Energy High-Level Waste Storage Tanks and Appurtenances

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyay, K.; Cornell, A.; Costantino, C.; Kennedy, R.; Miller, C.; Veletsos, A.

    1995-10-01

    This document provides seismic design and evaluation guidelines for underground high-level waste storage tanks. The guidelines reflect the knowledge acquired in the last two decades in defining seismic ground motion and calculating hydrodynamic loads, dynamic soil pressures and other loads for underground tank structures, piping and equipment. The application of the guidelines is illustrated with examples. The guidelines are developed for a specific design of underground storage tanks, namely double-shell structures. However, the methodology discussed is applicable for other types of tank structures as well. The application of these and of suitably adjusted versions of these concepts to other structural types will be addressed in a future version of this document. The original version of this document was published in January 1993. Since then, additional studies have been performed in several areas and the results are included in this revision. Comments received from the users are also addressed. Fundamental concepts supporting the basic seismic criteria contained in the original version have since then been incorporated and published in DOE-STD-1020-94 and its technical basis documents. This information has been deleted in the current revision.

  3. Comparative Analysis of Material Criteria in Neighborhood Sustainability Assessment Tools and Urban Design Guidelines: Cases of the UK, the US, Japan, and Korea

    National Research Council Canada - National Science Library

    Jungwon Yoon; Jiyoung Park

    2015-01-01

    .... As the notion of sustainable urban design has gained more significance, city governments have set their own guidelines for sustainable standards in urban design based on studies of sustainability assessment tools...

  4. Usability and Safety in Electronic Medical Records Interface Design: A Review of Recent Literature and Guideline Formulation.

    Science.gov (United States)

    Zahabi, Maryam; Kaber, David B; Swangnetr, Manida

    2015-08-01

    The objectives of this study were to (a) review electronic medical record (EMR) and related electronic health record (EHR) interface usability issues, (b) review how EMRs have been evaluated with safety analysis techniques along with any hazard recognition, and (c) formulate design guidelines and a concept for enhanced EMR interfaces with a focus on diagnosis and documentation processes. A major impact of information technology in health care has been the introduction of EMRs. Although numerous studies indicate use of EMRs to increase health care quality, there remain concerns with usability issues and safety. A literature search was conducted using Compendex, PubMed, CINAHL, and Web of Science databases to find EMR research published since 2000. Inclusion criteria included relevant English-language papers with subsets of keywords and any studies (manually) identified with a focus on EMR usability. Fifty studies met the inclusion criteria. Results revealed EMR and EHR usability problems to include violations of natural dialog, control consistency, effective use of language, effective information presentation, and customization principles as well as a lack of error prevention, minimization of cognitive load, and feedback. Studies focusing on EMR system safety made no objective assessments and applied only inductive reasoning methods for hazard recognition. On the basis of the identified usability problems and structure of safety analysis techniques, we provide EMR design guidelines and a design concept focused on the diagnosis process and documentation. The design guidelines and new interface concept can be used for prototyping and testing enhanced EMRs. © 2015, Human Factors and Ergonomics Society.

  5. Basic requirements for a preliminary conceptual design of the Korea advanced pyroprocess facility (KAPF)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ho Hee; Ko, Won Il; Chang, Hong Lae; Song, Dae Yong; Kwon, Eun Ha; Lee, Jung Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-12-15

    Korea Atomic Energy Research Institute (KAERI) has been developing technologies for pyroprocessing for spent PWR fuels. This study is part of a long term R and D program in Korea to develop an advanced recycle system that has the potential to meet and exceed the proliferation resistance, waste minimization, resource minimization, safety and economic goals of approved Korean Government energy policy, as well as the Generation IV International Forum (GIF) program. To support this R and D program, KAERI requires that an independent estimate be made of the conceptual design and cost for construction and operation of a 'Korea Advanced Pyroprocessing Facility', This document describes the basic requirements for preliminary conceptual design of the Korea Advanced Pyroprocess Facility (KAPF). The presented requirements will be modified to be more effective and feasible on an engineering basis during the subsequent design process.

  6. V/STOL tilt rotor aircraft study. Volume 2: Preliminary design of research aircraft

    Science.gov (United States)

    1972-01-01

    A preliminary design study was conducted to establish a minimum sized, low cost V/STOL tilt-rotor research aircraft with the capability of performing proof-of-concept flight research investigations applicable to a wide range of useful military and commercial configurations. The analysis and design approach was based on state-of-the-art methods and maximum use of off-the-shelf hardware and systems to reduce development risk, procurement cost and schedules impact. The rotors to be used are of 26 foot diameter and are the same as currently under construction and test as part of NASA Tilt-Rotor Contract NAS2-6505. The aircraft has a design gross weight of 12,000 lbs. The proposed engines to be used are Lycoming T53-L-13B rated at 1550 shaft horsepower which are fully qualified. A flight test investigation is recommended which will determine the capabilities and limitations of the research aircraft.

  7. Preliminary Design of a Synchronized Narrow Bandwidth FEL for Taiwan Light Source

    CERN Document Server

    Keung Lau Wai; Ching Fan, Tai; Zone Hsiao Feng; Tung Hsu Kuo; Hwang, Ching Shiang; Cheng Kuo Chin; Huei Luo Guo; Jen Wang Duan; Ping Wang Jau; Huey Wang Min

    2004-01-01

    Design study of a narrow line-width, high power IR-FEL facility has been carried out at NSRRC. This machine is designed to synchronize with the U9 undulator radiation of Taiwan Light Source and therefore provide new opportunity for chemical dynamics and condensed matter research. It has been proposed to use a super-conducting linac to provide a 60 MeV high quality electron beam to drive a 2.5-10 microns FEL oscillator with U5 undulator. Operating this linac in energy recovery mode will also be considered as an option to improve overall system effeciency and reduce heat loss and radiation dosage at the beam dump. Performance requirements and outcomes from this preliminary design study will be reported.

  8. The Geoengineering Model Intercomparison Project Phase 6 (GeoMIP6: simulation design and preliminary results

    Directory of Open Access Journals (Sweden)

    B. Kravitz

    2015-06-01

    simulations, and has been expanded to address several further important topics, including key uncertainties in extreme events, the use of geoengineering as part of a portfolio of responses to climate change, and the relatively new idea of cirrus cloud thinning to allow more longwave radiation to escape to space. We discuss experiment designs, as well as the rationale for those designs, showing preliminary results from individual models when available. We also introduce a new feature, called the GeoMIP Testbed, which provides a platform for simulations that will be performed with a few models and subsequently assessed to determine whether the proposed experiment designs will be adopted as core (Tier 1 GeoMIP experiments. This is meant to encourage various stakeholders to propose new targeted experiments that address their key open science questions, with the goal of making GeoMIP more relevant to a broader set of communities.

  9. Preliminary optical design of an Active Optics test bench for space applications.

    Science.gov (United States)

    Calcines, A.; Bitenc, U.; Rolt, S.; Reeves, S.; Doelman, N.; Human, J.; Morris, T.; Myers, R.; Talbot, G.

    2017-03-01

    This communication presents a preliminary optical design for a test bench conceived within the European Space Agency's TRP project (Active Optics Correction Chain (AOCC) for large monolithic mirrors) with the goal of designing and developing an Active Optics system able to correct in space on telescopes apertures larger than 3 meters. The test bench design uses two deformable mirrors of 37.5 mm and 116 mm, the smallest mirror to generate aberrations and the largest one to correct them. The system is configured as a multi-functional test bench capable of verifying the performance of a Shack-Hartmann wavefront sensor as well as of a Phase Diversity based wavefront sensor. A third optical path leads to a high-order Shack-Hartmann wavefront sensor to monitor the entire system performance.

  10. Preliminary CFD Analysis for HVAC System Design of a Containment Building

    Energy Technology Data Exchange (ETDEWEB)

    Son, Sung Man; Choi, Choengryul [ELSOLTEC, Yongin (Korea, Republic of); Choo, Jae Ho; Hong, Moonpyo; Kim, Hyungseok [KEPCO Engineering and Construction, Gimcheon (Korea, Republic of)

    2016-10-15

    HVAC (Heating, Ventilation, Air Conditioning) system has been mainly designed based on overall heat balance and averaging concepts, which is simple and useful for designing overall system. However, such a method has the disadvantage that cannot predict the local flow and temperature distributions in a containment building. In this study, a CFD (Computational Fluid Dynamics) preliminary analysis is carried out to obtain detailed flow and temperature distributions in a containment building and to ensure that such information can be obtained via CFD analysis. This approach can be useful for hydrogen analysis in an accident related to hydrogen released into a containment building. In this study, CFD preliminary analysis has been performed to obtain the detailed information of the reactor containment building by using the CFD analysis techniques and to ensure that such information can be obtained via CFD analysis. We confirmed that CFD analysis can offer enough detailed information about flow patterns and temperature field and that CFD technique is a useful tool for HVAC design of nuclear power plants.

  11. Euler Technology Assessment program for preliminary aircraft design employing SPLITFLOW code with Cartesian unstructured grid method

    Science.gov (United States)

    Finley, Dennis B.

    1995-01-01

    This report documents results from the Euler Technology Assessment program. The objective was to evaluate the efficacy of Euler computational fluid dynamics (CFD) codes for use in preliminary aircraft design. Both the accuracy of the predictions and the rapidity of calculations were to be assessed. This portion of the study was conducted by Lockheed Fort Worth Company, using a recently developed in-house Cartesian-grid code called SPLITFLOW. The Cartesian grid technique offers several advantages for this study, including ease of volume grid generation and reduced number of cells compared to other grid schemes. SPLITFLOW also includes grid adaptation of the volume grid during the solution convergence to resolve high-gradient flow regions. This proved beneficial in resolving the large vortical structures in the flow for several configurations examined in the present study. The SPLITFLOW code predictions of the configuration forces and moments are shown to be adequate for preliminary design analysis, including predictions of sideslip effects and the effects of geometry variations at low and high angles of attack. The time required to generate the results from initial surface definition is on the order of several hours, including grid generation, which is compatible with the needs of the design environment.

  12. Mountaineer Commercial Scale Carbon Capture and Storage Project Topical Report: Preliminary Public Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Guy Cerimele

    2011-09-30

    This Preliminary Public Design Report consolidates for public use nonproprietary design information on the Mountaineer Commercial Scale Carbon Capture & Storage project. The report is based on the preliminary design information developed during the Phase I - Project Definition Phase, spanning the time period of February 1, 2010 through September 30, 2011. The report includes descriptions and/or discussions for: (1) DOE's Clean Coal Power Initiative, overall project & Phase I objectives, and the historical evolution of DOE and American Electric Power (AEP) sponsored projects leading to the current project; (2) Alstom's Chilled Ammonia Process (CAP) carbon capture retrofit technology and the carbon storage and monitoring system; (3) AEP's retrofit approach in terms of plant operational and integration philosophy; (4) The process island equipment and balance of plant systems for the CAP technology; (5) The carbon storage system, addressing injection wells, monitoring wells, system monitoring and controls logic philosophy; (6) Overall project estimate that includes the overnight cost estimate, cost escalation for future year expenditures, and major project risks that factored into the development of the risk based contingency; and (7) AEP's decision to suspend further work on the project at the end of Phase I, notwithstanding its assessment that the Alstom CAP technology is ready for commercial demonstration at the intended scale.

  13. Preliminary Design of the Brazilian's National Institute for Space Research Broadband Radiometer for Solar Observations

    Science.gov (United States)

    Berni, L. A.; Vieira, L. E. A.; Savonov, G. S.; Dal Lago, A.; Mendes, O.; Silva, M. R.; Guarnieri, F.; Sampaio, M.; Barbosa, M. J.; Vilas Boas, J. V.; Branco, R. H. F.; Nishimori, M.; Silva, L. A.; Carlesso, F.; Rodríguez Gómez, J. M.; Alves, L. R.; Vaz Castilho, B.; Santos, J.; Silva Paula, A.; Cardoso, F.

    2017-10-01

    The Total Solar Irradiance (TSI), which is the total radiation arriving at Earth's atmosphere from the Sun, is one of the most important forcing of the Earths climate. Measurements of the TSI have been made employing instruments on board several space-based platforms during the last four solar cycles. However, combining these measurements is still challenging due to the degradation of the sensor elements and the long-term stability of the electronics. Here we describe the preliminary efforts to design an absolute radiometer based on the principle of electrical substitution that is under development at Brazilian's National Institute for Space Research (INPE).

  14. Energy efficient engine flight propulsion system preliminary analysis and design report

    Science.gov (United States)

    Gardner, W. B.

    1979-01-01

    A flight propulsion system preliminary design was established that meets the program goals of at least a 12 percent reduction in thrust specific fuel consumption, at least a five percent reduction in direct operating cost, and one-half the performance deterioration rate of the most efficient current commercial engines. The engine provides a high probability of meeting the 1978 noise rule goal. Smoke and gaseous emissions defined by the EPA proposed standards for engines newly certified after 1 January 1981 are met with the exception of NOx, despite incorporation of all known NOx reduction technology.

  15. A dispersion model approach to the preliminary design of adsorber beds for trace contaminants

    Science.gov (United States)

    Madey, R.; Czayka, M.; Forsythe, R.; Povlis, J.; Yin, K.

    1976-01-01

    It is shown that a dispersion model for the transport of a gas through a porous medium can be useful in the preliminary design of adsorber beds for the control of trace contaminants. The transmission function is considered, taking into account the transmission of 102-ppm acetaldehyde in helium flowing at various flow rates through an absorber bed. The experiments were conducted at a temperature of 25.0 C. Attention is given to a representation of the experimental breakthrough curve, the volume adsorption capacity, temperature studies, and correlations.

  16. Preliminary Design of Control Network for HT-7U Tokamak Cryogenic System

    Institute of Scientific and Technical Information of China (English)

    Jin Yibin(金毅彬); Zhuang Ming(庄明); Bai Hongyu(白宏宇)

    2003-01-01

    In the course of the cryoplant modernization, a control network will be set up in order to facilitate the control, the supervision, the centralized data acquisition and the alarm handling of the cryogenic system for HT-7U tokamak. The paper introduces the preliminary design of control network based on the Controller Link Network for HT-7U tokamak cryogenic system. The multi-layer structure mentioned in the paper is the mainstream of automatic control.The control philosophy, the structure of the network and the components for control are also presented.

  17. 10 CFR 960.4 - Postclosure guidelines.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Postclosure guidelines. 960.4 Section 960.4 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Postclosure Guidelines § 960.4 Postclosure guidelines. The guidelines in this subpart specify...

  18. 10 CFR 960.5 - Preclosure guidelines.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Preclosure guidelines. 960.5 Section 960.5 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Preclosure Guidelines § 960.5 Preclosure guidelines. The guidelines in this subpart specify...

  19. 10 CFR 960.3 - Implementation guidelines.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Implementation guidelines. 960.3 Section 960.3 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3 Implementation guidelines. The guidelines of this...

  20. Preliminary design study of underground pumped hydro and compressed-air energy storage in hard rock. Volume 1: Executive summary

    Science.gov (United States)

    1981-05-01

    A preliminary design study of water compensated Compressed Air Energy Storage (CAES) and Underground Pumped Hydroelectric (UPH) plants for siting in geological conditions suitable for hard rock excavations was performed. The study was divided into five primary tasks as follows: establishment of design criteria and analysis of impact on power system; selection of site and establishment of site characteristics; formulation of design approaches; assessment of environmental and safety aspects; and preparation of preliminary design of plant. The salient aspects considered and the conclusions reached during the consideration of the five primary tasks for both CAES and UPH are presented.

  1. Analyses of IEQ and user satisfaction in 20 office buildings : significant findings to impact future design standards and guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J.; Loftness, V.; Aziz, A. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Centre for Building Performance and Diagnostics

    2009-07-01

    This paper reported on a field study that provided supportive ideas for environmental standards and design guidelines for office environments which could satisfy indoor environmental quality (IEQ) requirements. IEQ is an important variable affecting occupant health, productivity as well as organization success. As such, occupant comfort and satisfaction must be ensured for each component of IEQ, notably thermal quality, air quality, lighting quality, and noise. In partnership with the General Services Administration, the Center for Building Performance and Diagnostics research team at Carnegie Mellon conducted a post-occupancy evaluation field study of 20 commercial office buildings throughout the United States. The objective and subjective data of IEQ obtained from the study were used for correlational analysis. The study results provide evidences to modify office environmental design guideline to improve physiological and environmental benefits. 5 refs., 1 tab., 10 figs.

  2. Seismic design and evaluation guidelines for the Department of Energy high-level waste storage tanks and appurtenances

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyay, K.; Cornell, A.; Costantino, C.; Kennedy, R.; Miller, C.; Veletsos, A.

    1993-01-01

    This document provides guidelines for the design and evaluation of underground high-level waste storage tanks due to seismic loads. Attempts were made to reflect the knowledge acquired in the last two decades in the areas of defining the ground motion and calculating hydrodynamic loads and dynamic soil pressures for underground tank structures. The application of the analysis approach is illustrated with an example. The guidelines are developed for specific design of underground storage tanks, namely double-shell structures. However, the methodology discussed is applicable for other types of tank structures as well. The application of these and of suitably adjusted versions of these concepts to other structural types will be addressed in a future version of this document.

  3. Musculoskeletal symptoms as related to ergonomic factors in Iranian hand-woven carpet industry and general guidelines for workstation design.

    Science.gov (United States)

    Choobineh, Alireza; Lahmi, Mohammadali; Shahnavaz, Houshang; Jazani, Reza Khani; Hosseini, Mostafa

    2004-01-01

    Carpet weaving is a high risk occupation for developing musculoskeletal disorders (MSDs). The objectives of the present study, which was carried out in the Iranian hand-woven carpet industry, were determination of the prevalence of MSD symptoms, identification of major factors associated with MSD symptoms and development of guidelines for workstation design. 1,439 randomly selected weavers participated in this study. A questionnaire was used to collect data on MSD symptoms. The results revealed that the prevalence rates for symptoms in different body regions were high as compared to the general Iranian population (for neck, back and large joints, p loom type, working posture, daily working time and seat type. Based on the results, some general guidelines for designing weaving workstations were developed. A prototype test showed that the new workstation was acceptable for subject tests and that it improved working posture.

  4. Design Guidelines for the Development of Virtual Reality and Augmented Reality Training Systems for Maintenance and Assembly Tasks

    Directory of Open Access Journals (Sweden)

    Tecchia Franco

    2011-12-01

    Full Text Available The current work describes design guidelines for the development of Virtual Reality (VR and Augmented Reality (AR platforms to train technicians on maintenance and assembly tasks of industrial machineries. The main skill involved in this kind of tasks is the procedural skill. Based on past literature and studies conducted within the SKILLS project, several main design guidelines were formulated. First, observational learning integrated properly within the training protocol increases training efficiency. Second, training protocols combining physical and cognitive fidelity enhances procedural skills acquisition. Third, guidance aids should be provided in a proper and controlled way. And last, enriched information about the task helps trainees to develop a useful mental model of the task. These recommendations were implemented in both VR and AR training platforms.

  5. Design and analysis of a Web-based guideline tutorial system that emphasizes clinical trial evidence.

    Science.gov (United States)

    Bell, D S; Mangione, C M

    2000-01-01

    To describe a Web-based guideline tutorial system and evaluate its features. A Web-based tutorial system called SAGE (Self-study Acceleration with Graphic Evidence) was constructed to teach knowledge important for care after myocardial infarction. SAGE features a pretest, followed by an overview that coordinates studying resources for a set of learning objectives. Resources include pretest answers, guideline passages, and graphical presentations of clinical trial results. Data on the use of SAGE was obtained from 79 residents participating in a larger trial. Linear regression was used to correlate the amount learned with resource-use, and resource-use with user characteristics. On average, users accessed less than half of the guideline passages and very little of the graphic evidence. Greater use of guideline passages was correlated with greater immediate learning, but use of graphic evidence was not. Further research is needed to motivate more thorough self-study and to integrate clinical trial evidence with guideline-based education.

  6. Preliminary Neutronic Design of High Burnup OTTO Cycle Pebble Bed Reactor

    Directory of Open Access Journals (Sweden)

    T. Setiadipura

    2015-04-01

    Full Text Available The pebble bed type High Temperature Gas-cooled Reactor (HTGR is among the interesting nuclear reactor designs in terms of safety and flexibility for co-generation applications. In addition, the strong inherent safety characteristics of the pebble bed reactor (PBR which is based on natural mechanisms improve the simplicity of the PBR design, in particular for the Once-Through-Then-Out (OTTO cycle PBR design. One of the important challenges of the OTTO cycle PBR design, and nuclear reactor design in general, is improving the nuclear fuel utilization which is shown by attaining a higher burnup value. This study performed a preliminary neutronic design study of a 200 MWt OTTO cycle PBR with high burnup while fulfilling the safety criteria of the PBR design.The safety criteria of the design was represented by the per-fuel-pebble maximum power generation of 4.5 kW/pebble. The maximum burnup value was also limited by the tested maximum burnup value which maintained the integrity of the pebble fuel. Parametric surveys were performed to obtain the optimized parameters used in this study, which are the fuel enrichment, per-pebble heavy metal (HM loading, and the average axial speed of the fuel. An optimum design with burnup value of 131.1 MWd/Kg-HM was achieved in this study which is much higher compare to the burnup of the reference design HTR-MODUL and a previously proposed OTTO-cycle PBR design. This optimum design uses 17% U-235 enrichment with 4 g HM-loading per fuel pebble

  7. Evaluating the impact and use of Transparent Reporting of Evaluations with Non-randomised Designs (TREND) reporting guidelines

    Science.gov (United States)

    Fuller, Thomas; Pearson, Mark; Peters, Jaime L; Anderson, Rob

    2012-01-01

    Introduction Accurate and full reporting of evaluation of interventions in health research is needed for evidence synthesis and informed decision-making. Evidence suggests that biases and incomplete reporting affect the assessment of study validity and the ability to include this data in secondary research. The Transparent Reporting of Evaluations with Non-randomised Designs (TREND) reporting guideline was developed to improve the transparency and accuracy of the reporting of behavioural and public health evaluations with non-randomised designs. Evaluations of reporting guidelines have shown that they can be effective in improving reporting completeness. Although TREND occupies a niche within reporting guidelines, and despite it being 8 years since publication, no study yet has assessed its impact on reporting completeness or investigated what factors affect its use by authors and journal editors. This protocol describes two studies that aim to redress this. Methods and analysis Study 1 will use an observational design to examine the uptake and use of TREND by authors, and by journals in their instructions to authors. A comparison of reporting completeness and study quality of papers that do and do not use TREND to inform reporting will be made. Study 2 will use a cross-sectional survey to investigate what factors inhibit or facilitate authors’ and journal editors’ use of TREND. Semistructured interviews will also be conducted with a subset of authors and editors to explore findings from study 1 and the surveys in greater depth. Ethics and dissemination These studies will generate evidence of how implementation and dissemination of the TREND guideline has affected reporting completeness in studies with experimental, non-randomised designs within behavioural and public health research. The project has received ethics approval from the Research Ethics Committee of the Peninsula College of Medicine and Dentistry, Universities of Exeter and Plymouth. PMID

  8. In Silico Analog Design for Terbinafine Against Trichophyton rubrum: A Preliminary Study.

    Science.gov (United States)

    Karumuri, Sudha; Singh, Puneet Kumar; Shukla, Pratyoosh

    2015-09-01

    The diseases caused by dermatophytes are common among several other infections which cause serious threat to human health. It is evident that enzyme squalene epoxidase is responsible for prolonged dermatophyte infection and it is appealing to note that this enzyme is also responsible for fatty acid synthesis in these groups of fungi. In the present study, terbinafine drug which targets enzyme squalene epoxidase has been explored to design its various novel analogues. The present study suggests that many more prominent drug analogues could be constituted which may be crucial towards designing new drug candidates. In the present study, we have designed a series of such analogues viz. [(2E)-6,6-dimethylhept-2-en-4-yn-1-yl](methyl)(naphthalen-1-ylmethyl)amine, N-[8-({[(2E)-6,6-dimethylhept-2-en-4-yn-1-yl](methyl)amino}methyl)naphthalen-1-yl]-2-(sulfoamino) acetamide, {[4-(dihydroxyamino)-8-({[(2E)-6,6-dimethylhept-2-en-4-yn-1-yl](methyl)amino}methyl)naphthalen-1-yl]sulfanyl}methanol and (R)-{[4-({[(2E,6R)-6,7-dimethyloct-2-en-4-yn-1-yl](methyl)amino}methyl)-5-[(hydroxysulfamoyl)amino]naphthalen-1-yl]amino}sulfinic acid. Moreover, further by molecular docking approach the binding between enzyme and designed analogues was further analysed. The present preliminary report suggested a considerably good docking interaction score of -338.75 kcal/mol between terbinafine and squalene epoxidase from Trichophyton rubrum. This preliminary study implies that few designed candidate ligands can be effectual towards the activity of this enzyme and can play crucial role in pathogenesis control of T. rubrum.

  9. Software requirements flow-down and preliminary software design for the G-CLEF spectrograph

    Science.gov (United States)

    Evans, Ian N.; Budynkiewicz, Jamie A.; DePonte Evans, Janet; Miller, Joseph B.; Onyuksel, Cem; Paxson, Charles; Plummer, David A.

    2016-08-01

    The Giant Magellan Telescope (GMT)-Consortium Large Earth Finder (G-CLEF) is a fiber-fed, precision radial velocity (PRV) optical echelle spectrograph that will be the first light instrument on the GMT. The G-CLEF instrument device control subsystem (IDCS) provides software control of the instrument hardware, including the active feedback loops that are required to meet the G-CLEF PRV stability requirements. The IDCS is also tasked with providing operational support packages that include data reduction pipelines and proposal preparation tools. A formal, but ultimately pragmatic approach is being used to establish a complete and correct set of requirements for both the G-CLEF device control and operational support packages. The device control packages must integrate tightly with the state-machine driven software and controls reference architecture designed by the GMT Organization. A model-based systems engineering methodology is being used to develop a preliminary design that meets these requirements. Through this process we have identified some lessons that have general applicability to the development of software for ground-based instrumentation. For example, tasking an individual with overall responsibility for science/software/hardware integration is a key step to ensuring effective integration between these elements. An operational concept document that includes detailed routine and non- routine operational sequences should be prepared in parallel with the hardware design process to tie together these elements and identify any gaps. Appropriate time-phasing of the hardware and software design phases is important, but revisions to driving requirements that impact software requirements and preliminary design are inevitable. Such revisions must be carefully managed to ensure efficient use of resources.

  10. A preliminary design of interior structure and foundation of an inflatable lunar habitat

    Science.gov (United States)

    Yin, Paul K.

    1989-01-01

    A preliminary structural design and analysis of an inflatable habitat for installation on the moon was completed. The concept takes the shape of a sphere with a diameter of approximately 16 meters. The interior framing provides five floor levels and is enclosed by a spherical air-tight membrane holding an interior pressure of 14.7 psi (101.4kpa). The spherical habitat is to be erected on the lunar surface with the lower one third below grade and the upper two thirds covered with a layer of lunar regolith for thermal insulation and shielding against radiation and meteoroids. The total dead weight (earth weight) of the structural aluminum, which is of vital interest for the costly space transportation, is presented. This structural dead weight represents a preliminary estimate without including structural details. The design results in two versions: one supports the weight of the radiation shielding in case of deflation of the fabric enclosure and the other assumes that the radiation shielding is self supporting. To gain some indication of the amount of structural materials needed if the identical habitat were installed on Mars and Earth, three additional design versions were generated where the only difference is in gravity. These additional design versions are highly academic since the difference will be much more than in gravity alone. The lateral loading due to dust storms on Mars and wind loads on Earth are some examples. The designs under the lunar gravity are realistic. They may not be adequate for final material procurement and fabrication, however, as the connection details, among other reasons, may effect the sizes of the structural members.

  11. Customer Relationship Management System in Occupational Safety & Health Companies: Research on Practice and Preliminary Design Solution

    Directory of Open Access Journals (Sweden)

    Robert Fabac

    2011-10-01

    Full Text Available One of the most prominent contemporary trends in formation of companies is the approach to development of a customer-oriented company. In this matter, various versions related to the intensity of this orientation are differentiated. Customer relationship management (CRM system is a well-known concept, and its practice is being studied and improved in connection to various sectors. Companies providing services of occupational safety and health (OHS mainly cooperate with a large number of customers and the quality of this cooperation largely affects the occupational safety and health of employees. Therefore, it is of both scientific and wider social interest to study and improve the relationship of these companies with their customers. This paper investigates the practice of applying CRM in Croatian OHS companies. It identifies the existing conditions and suggests possible improvements in the practice of CRM, based on experts’ assessments using analytic hierarchy process evaluation. Universal preliminary design was created as a framework concept for the formation of a typical customer-oriented OHS services company. Preliminary design includes a structural view, which provides more details through system diagrams, and an illustration of main cooperation processes of a company with its customer.

  12. Thermal Analysis of Iodine Satellite (iSAT) from Preliminary Design Review (PDR) to Critical Design Review (CDR)

    Science.gov (United States)

    Mauro, Stephanie

    2016-01-01

    The Iodine Satellite (iSAT) is a 12U cubesat with a primary mission to demonstrate the iodine fueled Hall Effect Thruster (HET) propulsion system. The spacecraft (SC) will operate throughout a one year mission in an effort to mature the propulsion system for use in future applications. The benefit of the HET is that it uses a propellant, iodine, which is easy to store and provides a high thrust-to-mass ratio. This paper will describe the thermal analysis and design of the SC between Preliminary Design Review (PDR) and Critical Design Review (CDR). The design of the satellite has undergone many changes due to a variety of challenges, both before PDR and during the time period discussed in this paper. Thermal challenges associated with the system include a high power density, small amounts of available radiative surface area, localized temperature requirements of the propulsion components, and unknown orbital parameters. The thermal control system is implemented to maintain component temperatures within their respective operational limits throughout the mission, while also maintaining propulsion components at the high temperatures needed to allow gaseous iodine propellant to flow. The design includes heaters, insulation, radiators, coatings, and thermal straps. Currently, the maximum temperatures for several components are near to their maximum operation limit, and the battery is close to its minimum operation limit. Mitigation strategies and planned work to solve these challenges will be discussed.

  13. Ocean thermal energy conversion cold water pipe preliminary design project. Task 2. Analysis for concept selection

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-04-01

    The successful performance of the CWP is of crucial importance to the overall OTEC system; the pipe itself is considered the most critical part of the entire operation. Because of the importance the CWP, a project for the analysis and design of CWP's was begun in the fall of 1978. The goals of this project were to study a variety of concepts for delivering cold water to an OTEC plant, to analyze and rank these concepts based on their relative cost and risk, and to develop preliminary design for those concepts which seemed most promising. Two representative platforms and sites were chosen: a spar buoy of a Gibbs and Cox design to be moored at a site off Punta Tuna, Puerto Rico, and a barge designed by APL/Johns Hopkins University, grazing about a site approximately 200 miles east of the coast of Brazil. The approach was to concentrate on the most promising concepts and on those which were either of general interest or espoused by others (e.g., steel and concrete concepts). Much of the overall attention, therefore, focused on analyzing rigid and compliant wall design, while stockade (except for the special case of the FRP stockade) and bottom-mounted concepts received less attention. A total of 67 CWP concepts were initially generated and subjected to a screening process. Of these, 16 were carried through design analysis, costing, and ranking. Study results are presented in detail. (WHK)

  14. Preliminary design of the beam screen cooling for the Future Circular Collider of hadron beams

    CERN Document Server

    Kotnig, C

    2015-01-01

    Following recommendations of the recent update of the European strategy in particle physics, CERN has undertaken an international study of possible future circular colliders beyond the LHC. This study considers an option for a very high energy (100 TeV) hadron-hadron collider located in a quasi-circular underground tunnel having a circumference of 80 to 100 km. The synchrotron radiation emitted by the high-energy hadron beam increases by more than two orders of magnitude compared to the LHC. To reduce the entropic load on the superconducting magnets' refrigeration system, beam screens are indispensable to extract the heat load at a higher temperature level. After illustrating the decisive constraints of the beam screen's refrigeration design, this paper presents a preliminary design of the length of a continuous cooling loop comparing helium and neon, for different cooling channel geometries with emphasis on the cooling length limitations and the exergetic efficiency.

  15. Preliminary design study of an alternate heat source assembly for a Brayton isotope power system

    Science.gov (United States)

    Strumpf, H. J.

    1978-01-01

    Results are presented for a study of the preliminary design of an alternate heat source assembly (HSA) intended for use in the Brayton isotope power system (BIPS). The BIPS converts thermal energy emitted by a radioactive heat source into electrical energy by means of a closed Brayton cycle. A heat source heat exchanger configuration was selected and optimized. The design consists of a 10 turn helically wound Hastelloy X tube. Thermal analyses were performed for various operating conditions to ensure that post impact containment shell (PICS) temperatures remain within specified limits. These limits are essentially satisfied for all modes of operation except for the emergency cooling system for which the PICS temperatures are too high. Neon was found to be the best choice for a fill gas for auxiliary cooling system operation. Low cycle fatigue life, natural frequency, and dynamic loading requirements can be met with minor modifications to the existing HSA.

  16. TPX: Contractor preliminary design review. Volume 5, Manufacturing R&D

    Energy Technology Data Exchange (ETDEWEB)

    Roach, J.F.; Urban, W.M.; Hartman, D. [Everson Electric Co., Bekthlehem, PA (United States)

    1995-08-04

    TPX Insulation & Impregnation R&D test results are reported for 1x2 samples designed for screening candidate conduit insulation systems for TPX PF and TF coils. The epoxy/glass insulation system and three proposed alternate insulation systems employing Kapton, was evaluated in as received sample condition and after 10 thermal cycles in liquid nitrogen. Two DGBA impregnation systems, Shell 826 and CTD101K were investigated. Square incoloy 908 and 316 LN stainless hollow conduits were used for 1x2 sample fabrication. Capacitance, dielectric loss, and insulation resistance dielectric characteristics were measured for all samples. Partial discharge performance was measured for samples either in air, under silicon oil, or under liquid nitrogen up to 10kVrms at 60 Hz. Hipot screening was performed at 10 kVdc. The samples were cross sectioned and evaluated for impregnation quality. The implications of the test results on the TPX preliminary design decision are discussed.

  17. Ocean Thermal Energy Conservation (OTEC) power system development (PDS) II. Preliminary design report

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-10

    This report documents the results and conclusions of the PDS II, Phase I, preliminary design of a 10 MWe OTEC power system, using enhanced plate type heat exchangers, and of representative 0.2 MWe test articles. It further provides the documentation (specifications, drawings, trade studies, etc.) resulting from the design activities. The data and discussions of the technical concepts are organized to respond to the PDS II, Phase II proposal evaluation criteria. This volume, which specifically addresses the three evaluation categories (heat exchangers, rotating machinery, and power system configuration and performance) is an integral part of the Phase II plans (proposal) which describe the technical approach to delivering test articles to OTEC-1. In addition, there is a section which addresses power system cost and net energy analysis and another which discusses the results of stainless steel feasibility studies. Supporting documentation is contained in two appendix volumes.

  18. Guidelines for the Design of Digital Closed Questions for Assessment and Learning in Higher Education

    Science.gov (United States)

    Draaijer, Silvester; Hartog, R. J. M.; Hofstee, J.

    2007-01-01

    Systems for computer based assessment as well as learning management systems offer a number of innovative closed question types, which are used more and more in higher education. These closed questions are used in computer based summative exams, in diagnostic tests, and in computer based activating learning material. Guidelines focusing on the…

  19. Design guidelines for an umbilical cord blood stem cell therapy quality assessment model

    Science.gov (United States)

    Januszewski, Witold S.; Michałek, Krzysztof; Yagensky, Oleksandr; Wardzińska, Marta

    The paper enlists the pivotal guidelines for producing an empirical umbilical cord blood stem cell therapy quality assessment model. The methodology adapted was single equation linear model with domain knowledge derived from MEDAFAR classification. The resulting model is ready for therapeutical application.

  20. Eight guidelines for the design of instructional videos for software training

    NARCIS (Netherlands)

    Meij, van der H.; Meij, van der J.

    2013-01-01

    Purpose: Video has become a popular means for delivering "how to" information about a wide variety of software tasks. With video rapidly becoming a major instructional method, the question arises of their effectiveness for software training. This paper provides a set of eight guidelines for the cons

  1. Wearables for all: development of guidelines to stimulate accessible wearable technology design

    NARCIS (Netherlands)

    Wentzel, Jobke; Velleman, Eric M.; Geest, van der Thea

    2016-01-01

    In this paper, we present the rationale and approach for establishing guidelines for the development of accessible wearables. Wearable technology is increasingly integrated in our everyday lives. Therefore, ensuring accessibility is pivotal to prevent a digital divide between persons who have and pe

  2. Preliminary Design of a Modular Unmanned Research Vehicle. Volume 2. Subsystem Technical Development Design Study

    Science.gov (United States)

    1988-12-01

    for real-time analysis, or post-test aaalvsis innaediate;y foliowing the tesi , in a form that was iure easily interpreted. Because the test site will...in the baseline MURV design is the Teledyne 320. 11.6.2.4 Fuel Loading Trade Study With the propulsion system characteristics de- cided , the optimal

  3. The preliminary design of the optical Thomson scattering diagnostic for the National Ignition Facility

    Science.gov (United States)

    Datte, P.; Ross, J. S.; Froula, D.; Galbraith, J.; Glenzer, S.; Hatch, B.; Kilkenny, J.; Landen, O.; Manuel, A. M.; Molander, W.; Montgomery, D.; Moody, J.; Swadling, G.; Weaver, J.; Vergel de Dios, G.; Vitalich, M.

    2016-05-01

    The National Ignition Facility (NIF) is a 192 laser beam facility designed to support the Stockpile Stewardship, High Energy Density and Inertial Confinement Fusion programs. We report on the preliminary design of an Optical Thomson Scattering (OTS) diagnostic that has the potential to transform the community's understanding of NIF hohlraum physics by providing first principle, local, time-resolved measurements of under-dense plasma conditions. The system design allows operation with different probe laser wavelengths by manual selection of the appropriate beamsplitter and gratings before the shot. A deep-UV probe beam (λ0 between 185-215 nm) will optimally collect Thomson scattered light from plasma densities of 5 x 1020 electrons/cm3 while a 3ω probe will optimally collect Thomson scattered light from plasma densities of 1 x 1019 electrons/cm3. We report the phase I design of a two phase design strategy. Phase I includes the OTS recording system to measure background levels at NIF and phase II will include the integration of a probe laser.

  4. Preliminary design of a NIR prime focus corrector for the Galileo Telescope

    CERN Document Server

    Pernechele, C; Conconi, P; Gardiol, D; Molinari, E; Zerbi, F M; Pernechele, Claudio; Bortoletto, Favio; Conconi, Paolo; Gardiol, Daniele; Molinari, Emilio; Zerbi, Filippo

    2000-01-01

    In this paper a preliminary design for a prime focus corrector to be mounted at the Telescopio Nazionale Galileo (TNG) is presented. The telescope is located on La Palma (Canary Islands) and has a primary mirror of 3.5 m with a hyperbolic sag. Two optical designs have been considered in order to exploit detectors with 1k x 1k and 2k x 2k pixels. Each design makes use of four lenses, two of which are aspherical. The first lens diameters are, respectively, of 140 mm and 320 mm for the two kind of detectors. For both designs the telescope pupil is deliberately not re-imaged, and therefore it will not be possible to insert a cold stop. For such a reason particular care has been dedicated to the telescope thermal background study, in order to optimise the baffling system. The optics is able to correct fields of 11' x 11' and of 60'x60', depending on the design. It should be considered that the particular geometry of the focal plane array mosaic does not permit a full exploitation of the entire field, being based o...

  5. User-programmer dialogue: Guidelines for designing menus and help files for interactive computer systems

    Science.gov (United States)

    Carlson, P. A.

    1983-01-01

    This document is a set of guidelines to aid a programmer in making the various decisions necessary for a clear user-programmer dialogue. Its goal is to promote an effective and efficient transfer of information between programmer and user. These guidelines are divided into four sections: (1) Format, (2) Sequence, (3) Audience, and (4) Aim. Format, in terms of this study, means the spatial and structural presentation of information. Sequence deals with the procedural aspects of multiple panel displays. This section looks at the issues of timelines of presentation, modularization of information, and patterns of user behavior. Audience looks at the relationship among programmer, user, and message. It covers the issues of analyzing the audience's knowledge, attitudes, and needs, anticipating the audience's inferences, and identifying textual ambiguities. The programmer's aim or intention shows up in everything from tone to format. Aim considers the programmer's purpose.

  6. High risk cohort study for psychiatric disorders in childhood: rationale, design, methods and preliminary results.

    Science.gov (United States)

    Salum, Giovanni Abrahão; Gadelha, Ary; Pan, Pedro Mario; Moriyama, Tais Silveira; Graeff-Martins, Ana Soledade; Tamanaha, Ana Carina; Alvarenga, Pedro; Valle Krieger, Fernanda; Fleitlich-Bilyk, Bacy; Jackowski, Andrea; Sato, João Ricardo; Brietzke, Elisa; Polanczyk, Guilherme Vanoni; Brentani, Helena; de Jesus Mari, Jair; Do Rosário, Maria Conceição; Manfro, Gisele Gus; Bressan, Rodrigo Affonseca; Mercadante, Marcos Tomanik; Miguel, Eurípedes Constantino; Rohde, Luis Augusto

    2015-03-01

    The objective of this study is to present the rationale, methods, design and preliminary results from the High Risk Cohort Study for the Development of Childhood Psychiatric Disorders. We describe the sample selection and the components of each phases of the study, its instruments, tasks and procedures. Preliminary results are limited to the baseline phase and encompass: (i) the efficacy of the oversampling procedure used to increase the frequency of both child and family psychopathology; (ii) interrater reliability and (iii) the role of differential participation rate. A total of 9937 children from 57 schools participated in the screening procedures. From those 2512 (random = 958; high risk = 1554) were further evaluated with diagnostic instruments. The prevalence of any child mental disorder in the random strata and high-risk strata was 19.9% and 29.7%. The oversampling procedure was successful in selecting a sample with higher family rates of any mental disorders according to diagnostic instruments. Interrater reliability (kappa) for the main diagnostic instrument range from 0.72 (hyperkinetic disorders) to 0.84 (emotional disorders). The screening instrument was successful in selecting a sub-sample with "high risk" for developing mental disorders. This study may help advance the field of child psychiatry and ultimately provide useful clinical information.

  7. Preliminary designs for 25 kWe advanced Stirling conversion systems for dish electric applications

    Science.gov (United States)

    Shaltens, Richard K.; Schreiber, Jeffrey G.

    1990-01-01

    Under the Department of Energy's (DOE) Solar Thermal Technology Program, Sandia National Laboratories is evaluating heat engines for terrestrial Solar Distributed Heat Receivers. The Stirling engine has been identified by Sandia as one of the most promising engines for terrestrial applications. The Stirling engine also has the potential to meet DOE's performance and cost goals. The NASA Lewis Research Center is conducting Stirling engine technology development activities directed toward a dynamic power source for space applications. Space power systems requirements include high reliability, very long life, low vibration and high efficiency. The free-piston Stirling engine has the potential for future high power space conversion systems, either nuclear or solar powered. Although both applications appear to be quite different, their requirements complement each other. Preliminary designs feature a free-piston Stirling engine, a liquid metal heat transport system, and a means to provide nominally 25 kW electric power to a utility grid while meeting DOE's performance and long term cost goals. The Cummins design incorporates a linear alternator to provide the electrical output, while the STC design generates electrical power indirectly through a hydraulic pump/motor coupled to an induction generator. Both designs for the ASCS's will use technology which can reasonably be expected to be available in the early 1990's.

  8. Design and preliminary test of precision segment positioning actuator for the California Extremely Large Telescope

    Science.gov (United States)

    Lorell, Kenneth R.; Aubrun, Jean-Noel; Clappier, Robert R.; Shelef, Ben; Shelef, Gad

    2003-01-01

    In order for the California Extremely Large Telescope (CELT) to achieve the required optical performance, each of its 1000 primary mirror segments must be positioned relative to adjacent segments with nanometer-level accuracy. This can be accomplished using three actuators for each segment to actively control the segment in tip, tilt, and piston. The Keck telescopes utilize a segmented primary mirror similar to CELT employing a highly successful actuator design. However, because of its size and the shear number of actuators (3000 vs. 108 for Keck), CELT will require a different design. Sensitivity to wind loads and structural vibrations, the large dynamic range, low operating power, and extremely reliable operation, all achieved at an affordable unit cost, are the most demanding design requirements. This paper examines four actuator concepts and presents a trade-off between them. The concept that best met the CELT requirements is described along with an analysis of its performance. The concept is based on techniques that achieve the required accuracy while providing a substantial amount of vibration attenuation and damping. A prototype actuator has been built to validate this concept. Preliminary tests confirm predicted behavior and future tests will establish a sound baseline for final design and production.

  9. An overview of the Tokamak Physics Experiment vacuum vessel preliminary design

    Energy Technology Data Exchange (ETDEWEB)

    Rocco, R.E. [Raytheon Engineers and Constructors, Inc., Princeton, NJ (United States)

    1995-12-31

    The mission of the Tokamak Physics Experiment (TPX) Project is to develop the scientific basis for a compact and continuously operating tokamak fusion reactor. The vacuum vessel, which consists of a double walled torus, ports and supports, is a major element of the TPX machine. This paper provides an overview of the vacuum vessel preliminary design work. The design of the vacuum vessel is being carried out by an industrial team under subcontract to the Princeton Plasma Physics Laboratory. The respective work scopes of this team are discussed. The role of concurrent engineering is presented in the context of this design-build subcontract. A discussion of the engineering requirements, material selection rationale and vacuum vessel configuration is provided. Titanium 6Al-4V will be used to fabricate the vacuum vessel. Significant material concerns were identified with the use of titanium; hydrogen embrittlement and the effects of borated water were the major issues. A research and development (R and D) program was established to resolve these material issues as well as to develop the vessel weld details. A comprehensive analytical effort was established to perform the structural and thermal analysis of the vessel. Design details of the vessel, supports, ports, and flanges are presented.

  10. The Geoengineering Model Intercomparison Project Phase 6 (GeoMIP6: simulation design and preliminary results

    Directory of Open Access Journals (Sweden)

    B. Kravitz

    2015-10-01

    Full Text Available We present a suite of new climate model experiment designs for the Geoengineering Model Intercomparison Project (GeoMIP. This set of experiments, named GeoMIP6 (to be consistent with the Coupled Model Intercomparison Project Phase 6, builds on the previous GeoMIP project simulations, and has been expanded to address several further important topics, including key uncertainties in extreme events, the use of geoengineering as part of a portfolio of responses to climate change, and the relatively new idea of cirrus cloud thinning to allow more longwave radiation to escape to space. We discuss experiment designs, as well as the rationale for those designs, showing preliminary results from individual models when available. We also introduce a new feature, called the GeoMIP Testbed, which provides a platform for simulations that will be performed with a few models and subsequently assessed to determine whether the proposed experiment designs will be adopted as core (Tier 1 GeoMIP experiments. This is meant to encourage various stakeholders to propose new targeted experiments that address their key open science questions, with the goal of making GeoMIP more relevant to a broader set of communities.

  11. Novel modular 2-DOF microsurgical forceps for transoral laser microsurgeries: Ergonomic design and preliminary evaluation.

    Science.gov (United States)

    Chauhan, Manish; Barresi, Giacinto; Deshpande, Nikhil; Caldwell, Darwin G; Mattos, Leonardo S

    2016-08-01

    Transoral Laser Microsurgeries (TLM) demand a great level of control and precision in intraoperative tissue manipulation. The optimal eradication of the diseased tissue is possible only with coordinated control of the laser aiming for incision and the microsurgical tools for orienting and stretching the tissue. However, the traditional microsurgical tools are long, single purpose, one degree-of-freedom (DOF), rigid tools with small range of motion and a normal grasping handle inducing non-ergonomic usage. This paper presents a novel, modular microsurgical tool to overcome the challenges of the traditional tools and improve the surgeon-tool usage experience. The novel design adds a rotational DOF to expand the reach and functionality of the tool. The device is provided with an ergonomic grasping handle that avoids extreme wrist excursions and is capable of adapting to the variety of tools used in TLM within the same design. The performance of the new microsurgical tool was evaluated through a subjective assessment with both medical students and expert surgeons. The evaluation demonstrated a general acceptance of the new forceps tool, with the expert surgeons providing positive appraisals for the improved functionality and user experience with the tool, which indicates towards the potential suitability of the device for TLM. The parameters assessed in the preliminary evaluation not only provide a sense of the advantages of the novel design, but also guide future evolution of the tool design.

  12. The Geoengineering Model Intercomparison Project Phase 6 (GeoMIP6): simulation design and preliminary results

    Science.gov (United States)

    Kravitz, B.; Robock, A.; Tilmes, S.; Boucher, O.; English, J. M.; Irvine, P. J.; Jones, A.; Lawrence, M. G.; MacCracken, M.; Muri, H.; Moore, J. C.; Niemeier, U.; Phipps, S. J.; Sillmann, J.; Storelvmo, T.; Wang, H.; Watanabe, S.

    2015-10-01

    We present a suite of new climate model experiment designs for the Geoengineering Model Intercomparison Project (GeoMIP). This set of experiments, named GeoMIP6 (to be consistent with the Coupled Model Intercomparison Project Phase 6), builds on the previous GeoMIP project simulations, and has been expanded to address several further important topics, including key uncertainties in extreme events, the use of geoengineering as part of a portfolio of responses to climate change, and the relatively new idea of cirrus cloud thinning to allow more longwave radiation to escape to space. We discuss experiment designs, as well as the rationale for those designs, showing preliminary results from individual models when available. We also introduce a new feature, called the GeoMIP Testbed, which provides a platform for simulations that will be performed with a few models and subsequently assessed to determine whether the proposed experiment designs will be adopted as core (Tier 1) GeoMIP experiments. This is meant to encourage various stakeholders to propose new targeted experiments that address their key open science questions, with the goal of making GeoMIP more relevant to a broader set of communities.

  13. The ICE spectrograph for PEPSI at the LBT: preliminary optical design

    Science.gov (United States)

    Pallavicini, Roberto; Zerbi, Filippo M.; Spano, Paolo; Conconi, Paolo; Mazzoleni, Ruben; Molinari, Emilio; Strassmeier, Klaus G.

    2003-03-01

    We present a preliminary design study for a high-resolution echelle spectrograph (ICE) to be used with the spectropolarimeter PEPSI under development at the LBT. In order to meet the scientific requirements and take full advantage of the peculiarities of the LBT (i.e. the binocular nature and the adaptive optics capabilities), we have designed a fiber-fed bench mounted instrument for both high resolution (R ≍ 100,000; non-AO polarimetric and integral light modes) and ultra-high resolution (R ≍ 300,000; AO integral light mode). In both cases, 4 spectra per order (two for each primary mirror) shall be accomodated in a 2-dimensional cross dispersed echelle format. In order to obtain a resolution-slit product of ≍ 100,000 as required by the science case, we have considered two alternative designs, one with two R4 echelles in series and the other with a sigle R4 echelle and fiber slicing. A white-pupil design, VPH cross-dispersers and two cameras of different focal length for the AO and non-AO modes are adopted in both cases. It is concluded that the single-echelle fiber-slicer solution has to be preferred in terms of performances, complexity and cost. It can be implemented at the LBT in two phases, with the long-camera AO mode added in a second phase depending on the availability of funds and the time-scale for implementation of the AO system.

  14. Design of a Regenerative Life Support System for a Moon Base. Preliminary Results.

    Science.gov (United States)

    Duatis Juarez, Jordi; Guirado, Víctor; Lasseur, Christophe

    NTE-SENER has finalised a study under an ESA contract, to define a preliminary system design of an European Module to provide Environmental Control and Life Support to a potential Moon base. The design is based on current Life Support System technologies under development in Europe (MELiSSA, GWRU, Sabatier Reactor and UTU) along with contamination and microbial detection technologies (ANITA, MIDASS). The ECLSS is sized to provide water, air and up to the 40 As a support to the study a simulator has been developed to analyse the energy, volume and mass and the flow rates and efficiencies of the different components. The study applied the basics of the ALISSE criteria to evaluate the technologies taking as a source the results of the simulations. Detailed models of the different technologies have been developed including feedback from the pilot designs. The results of the study have showed up opportunities of improvement and many points that need to be further investigated. The technologies used in the study are based on the MELiSSA Pilot Plant reactors implementation and the results could affect their design in the near fu-ture in aspects such as carbon recycling, irrigation methods, energy consumption, technologies involved, etc.

  15. Preliminary Study on Kano Model in the Conceptual Design Activities for Product Lifecycle Improvement

    Science.gov (United States)

    Fahrul Hassan, Mohd; Rahman, M. R. A.; Arifin, A. M. T.; Ismail, A. E.; Rasidi Ibrahim, M.; Zulafif Rahim, M.; Fauzi Ahmad, Md

    2017-08-01

    Product manufactured with short life cycle had only one major issue, it can lead to increasing volume of waste. Day by day, this untreated waste had consumed many landfill spaces, waiting for any possible alternatives. Lack of product recovery knowledge and recyclability features imprinted into product design are one of the main reason behind all this. Sustainable awareness aspect should not just be implied into people’s mind, but also onto product design. This paper presents a preliminary study on Kano model method in the conceptual design activities to improve product lifecycle. Kano model is a survey-type method, used to analyze and distinguished product qualities or features, also how the customers may have perceived them. Three important attributes of Kano model are performance, attractive and must-be. The proposed approach enables better understanding of customer requirements while providing a way for Kano model to be integrated into engineering design to improve product’s end-of-life. Further works will be continued to provide a better lifecycle option (increase percentage of reuse, remanufacture or recycle, whereby decrease percentage of waste) of a product using Kano model approach.

  16. Advanced tokamak reactors based on the spherical torus (ATR/ST). Preliminary design considerations

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.L.; Krakowski, R.A.; Bathke, C.G.; Copenhaver, C.; Schnurr, N.M.; Engelhardt, A.G.; Seed, T.J.; Zubrin, R.M.

    1986-06-01

    Preliminary design results relating to an advanced magnetic fusion reactor concept based on the high-beta, low-aspect-ratio, spherical-torus tokamak are summarized. The concept includes resistive (demountable) toroidal-field coils, magnetic-divertor impurity control, oscillating-field current drive, and a flowing liquid-metal breeding blanket. Results of parametric tradeoff studies, plasma engineering modeling, fusion-power-core mechanical design, neutronics analyses, and blanket thermalhydraulics studies are described. The approach, models, and interim results described here provide a basis for a more detailed design. Key issues quantified for the spherical-torus reactor center on the need for an efficient drive for this high-current (approx.40 MA) device as well as the economic desirability to increase the net electrical power from the nominal 500-MWe(net) value adopted for the baseline system. Although a direct extension of present tokamak scaling, the stablity and transport of this high-beta (approx.0.3) plasma is a key unknown that is resoluble only by experiment. The spherical torus generally provides a route to improved tokamak reactors as measured by considerably simplified coil technology in a configuration that allows a realistic magnetic divertor design, both leading to increased mass power density and reduced cost.

  17. MICE -- Absorber and focus coil safety working group design document: Preliminary design and assessments

    Energy Technology Data Exchange (ETDEWEB)

    Barr, Giles; Baynham, Elwyn; Black, Edgar; Bradshaw, Tom; Cummings, Mary Anne; Green, Michael A.; Ishimoto, Shigeru; Ivanyushenkov, Yury; Lau, Wing; Zisman, Michael

    2003-12-04

    A Neutrino Factory based on a muon storage ring is the ultimate tool for studies of neutrino oscillations, including possibly the discovery of leptonic CP violation. it is also the first step toward a muon collider. To develop a stored-muon-beam facility to serve as a Neutrino Factory, it is necessary to ''cool'' a muon beam (decrease its phase-space volume). The short lifetime of the muon, 2.2 {micro}s at rest, eliminates all currently demonstrated cooling techniques and requires that a new, heretofore untried, technique--ionization cooling--be employed. Although ionization cooling of muons has never been demonstrated in practice, it has been shown by end-to-end simulation and design studies to be an important factor both for the performance and for the cost of a Neutrino Factory. This motivates an international program of R and D, including an experimental demonstration at Rutherford Appleton Laboratory (RAL). The aims of the international Muon Ionization Cooling Experiment are: (1) to show that it is possible to design, engineer and build a section of cooling channel capable of giving the desired performance for a Neutrino Factory; and (2) to place it in a muon beam and measure its performance in various modes of operation and beam conditions, thereby investigating the limits and practicality of cooling. The MICE collaboration has designed an experiment in which a section of an ionization cooling channel is exposed to a muon beam. This cooling channel assembles liquid-hydrogen absorbers providing energy loss and high-gradient radio frequency (RF) cavities to re-accelerate the particles, all tightly contained in a magnetic channel. It reduces the beam transverse emittance by > 10% for muon momenta between 140 and 240 MeV/c. The layout of the experiment is shown. They utilize one complete magnetic cell of the cooling channel, comprising three absorber-focus-coil (AFC) modules and two RF-coupling-coil (RFCC) modules. Spectrometers placed before

  18. Experiments, conceptual design, preliminary cost estimates and schedules for an underground research facility

    Energy Technology Data Exchange (ETDEWEB)

    Korbin, G.; Wollenberg, H.; Wilson, C.; Strisower, B.; Chan, T.; Wedge, D.

    1981-09-01

    Plans for an underground research facility are presented, incorporating techniques to assess the hydrological and thermomechanical response of a rock mass to the introduction and long-term isolation of radioactive waste, and to assess the effects of excavation on the hydrologic integrity of a repository and its subsequent backfill, plugging, and sealing. The project is designed to utilize existing mine or civil works for access to experimental areas and is estimated to last 8 years at a total cost for contruction and operation of $39.0 million (1981 dollars). Performing the same experiments in an existing underground research facility would reduce the duration to 7-1/2 years and cost $27.7 million as a lower-bound estimate. These preliminary plans and estimates should be revised after specific sites are identified which would accommodate the facility.

  19. Microwave frequency sweep interferometer for plasma density measurements in ECR ion sources: Design and preliminary results

    Science.gov (United States)

    Torrisi, Giuseppe; Mascali, David; Neri, Lorenzo; Leonardi, Ornella; Sorbello, Gino; Celona, Luigi; Castro, Giuseppe; Agnello, Riccardo; Caruso, Antonio; Passarello, Santi; Longhitano, Alberto; Isernia, Tommaso; Gammino, Santo

    2016-02-01

    The Electron Cyclotron Resonance Ion Sources (ECRISs) development is strictly related to the availability of new diagnostic tools, as the existing ones are not adequate to such compact machines and to their plasma characteristics. Microwave interferometry is a non-invasive method for plasma diagnostics and represents the best candidate for plasma density measurement in hostile environment. Interferometry in ECRISs is a challenging task mainly due to their compact size. The typical density of ECR plasmas is in the range 1011-1013 cm-3 and it needs a probing beam wavelength of the order of few centimetres, comparable to the chamber radius. The paper describes the design of a microwave interferometer developed at the LNS-INFN laboratories based on the so-called "frequency sweep" method to filter out the multipath contribution in the detected signals. The measurement technique and the preliminary results (calibration) obtained during the experimental tests will be presented.

  20. Preliminary control system design and analysis for the Space Station Furnace Facility thermal control system

    Science.gov (United States)

    Jackson, M. E.

    1995-01-01

    This report presents the Space Station Furnace Facility (SSFF) thermal control system (TCS) preliminary control system design and analysis. The SSFF provides the necessary core systems to operate various materials processing furnaces. The TCS is defined as one of the core systems, and its function is to collect excess heat from furnaces and to provide precise cold temperature control of components and of certain furnace zones. Physical interconnection of parallel thermal control subsystems through a common pump implies the description of the TCS by coupled nonlinear differential equations in pressure and flow. This report formulates the system equations and develops the controllers that cause the interconnected subsystems to satisfy flow rate tracking requirements. Extensive digital simulation results are presented to show the flow rate tracking performance.

  1. Software tools and preliminary design of a control system for the 40m OAN radiotelescope

    Science.gov (United States)

    de Vicente, P.; Bolaño, R.

    2004-07-01

    The Observatorio Astronómico Nacional (OAN) is building a 40m radiotelescope in its facilities in Yebes (Spain) which will be delivered by April 2004. The servosystem will be controlled by an ACU (Antenna Control Unit), a real time computer running VxWorks which will be commanded from a remote computer (RCC) or from a local computer (LCC) which will act as console. We present the tools we have chosen to develop and use the control system for the RCC and the criteria followed for the choices we made. We also present a preliminary design of the control system on which we are currently working. The RCC will run a server which communicates with the ACU using sockets and with the clients, receivers and backends using OmniOrb, a free implementation of CORBA. Clients running Python will allow the users to control the antenna from any host connected to a LAN or a secure Internet connection.

  2. Microwave frequency sweep interferometer for plasma density measurements in ECR ion sources: Design and preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Torrisi, Giuseppe [INFN - Laboratori Nazionali del Sud, Via S. Sofia 62, 95125 Catania (Italy); University Mediterranea of Reggio Calabria, Reggio Calabria (Italy); Mascali, David; Neri, Lorenzo; Leonardi, Ornella; Celona, Luigi; Castro, Giuseppe; Agnello, Riccardo; Caruso, Antonio; Passarello, Santi; Longhitano, Alberto; Gammino, Santo [INFN - Laboratori Nazionali del Sud, Via S. Sofia 62, 95125 Catania (Italy); Sorbello, Gino [INFN - Laboratori Nazionali del Sud, Via S. Sofia 62, 95125 Catania (Italy); University of Catania, Catania, Italy and INFN-LNS, Catania (Italy); Isernia, Tommaso [University Mediterranea of Reggio Calabria, Reggio Calabria (Italy)

    2016-02-15

    The Electron Cyclotron Resonance Ion Sources (ECRISs) development is strictly related to the availability of new diagnostic tools, as the existing ones are not adequate to such compact machines and to their plasma characteristics. Microwave interferometry is a non-invasive method for plasma diagnostics and represents the best candidate for plasma density measurement in hostile environment. Interferometry in ECRISs is a challenging task mainly due to their compact size. The typical density of ECR plasmas is in the range 10{sup 11}–10{sup 13} cm{sup −3} and it needs a probing beam wavelength of the order of few centimetres, comparable to the chamber radius. The paper describes the design of a microwave interferometer developed at the LNS-INFN laboratories based on the so-called “frequency sweep” method to filter out the multipath contribution in the detected signals. The measurement technique and the preliminary results (calibration) obtained during the experimental tests will be presented.

  3. Cost-based optimization of a nuclear reactor core design: a preliminary model

    Energy Technology Data Exchange (ETDEWEB)

    Sacco, Wagner F.; Alves Filho, Hermes [Universidade do Estado do Rio de Janeiro (UERJ), Nova Friburgo, RJ (Brazil). Inst. Politecnico. Dept. de Modelagem Computacional]. E-mails: wfsacco@iprj.uerj.br; halves@iprj.uerj.br; Pereira, Claudio M.N.A. [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil). Div. de Reatores]. E-mail: cmnap@ien.gov.br

    2007-07-01

    A new formulation of a nuclear core design optimization problem is introduced in this article. Originally, the optimization problem consisted in adjusting several reactor cell parameters, such as dimensions, enrichment and materials, in order to minimize the radial power peaking factor in a three-enrichment zone reactor, considering restrictions on the average thermal flux, criticality and sub-moderation. Here, we address the same problem using the minimization of the fuel and cladding materials costs as the objective function, and the radial power peaking factor as an operational constraint. This cost-based optimization problem is attacked by two metaheuristics, the standard genetic algorithm (SGA), and a recently introduced Metropolis algorithm called the Particle Collision Algorithm (PCA). The two algorithms are submitted to the same computational effort and their results are compared. As the formulation presented is preliminary, more elaborate models are also discussed (author)

  4. Preliminary design review package for the solar heating and cooling central data processing system

    Energy Technology Data Exchange (ETDEWEB)

    1976-05-25

    This preliminary design review package, consisting of the Software Performance Specification, Hardware Performance Specification, and the Verification Plan for the Central Data Processing System (CDPS), was prepared by the IBM Corporation. The Central Data Processing System, located at IBM's FSD facility in Huntsville, Alabama, provides the resources required to assess the performance of solar heating and cooling systems at remote sites. These sites include residential, commercial, government, and educational types of buildings, and the solar heating and cooling systems can be hot water, space heating, cooling, and combinations of these. The instrumentation data associated with these systems will vary according to the application and must be collected, processed, and presented in a form which supports continuity of performance evaluation across all applications.

  5. Hybrid Spectral Micro-CT: System Design, Implementation, and Preliminary Results

    CERN Document Server

    Bennett, James R; Xu, Qiong; Yu, Hengyong; Walsh, Michael; Butler, Anthony; Butler, Phillip; Cao, Guohua; Mohs, Aaron; Wang, Ge

    2014-01-01

    Spectral CT has proven an important development in biomedical imaging, and there have been several publications in the past years demonstrating its merits in pre-clinical and clinical applications. In 2012, Xu et al. reported that near-term implementation of spectral micro-CT could be enhanced by a hybrid architecture: a narrow-beam spectral "interior" imaging chain integrated with a traditional wide-beam "global" imaging chain. This hybrid integration coupled with compressive sensing (CS)-based interior tomography demonstrated promising results for improved contrast resolution, and decreased system cost and radiation dose. The motivation for the current study is implementation and evaluation of the hybrid architecture with a first-of-its-kind hybrid spectral micro-CT system. Preliminary results confirm improvements in both contrast and spatial resolution. This technology is shown to merit further investigation and potential application in future spectral CT scanner design.

  6. PORFLOW MODELING FOR A PRELIMINARY ASSESSMENT OF THE PERFORMANCE OF NEW SALTSTONE DISPOSAL UNIT DESIGNS

    Energy Technology Data Exchange (ETDEWEB)

    Smith, F.

    2012-08-06

    At the request of Savannah River Remediation (SRR), SRNL has analyzed the expected performance obtained from using seven 32 million gallon Saltstone Disposal Units (SDUs) in the Z-Area Saltstone Disposal Facility (SDF) to store future saltstone grout. The analysis was based on preliminary SDU final design specifications. The analysis used PORFLOW modeling to calculate the release of 20 radionuclides from an SDU and transport of the radionuclides and daughters through the vadose zone. Results from this vadose zone analysis were combined with previously calculated releases from existing saltstone vaults and FDCs and a second PORFLOW model run to calculate aquifer transport to assessment points located along a boundary 100 m from the nearest edge of the SDF sources. Peak concentrations within 12 sectors spaced along the 100 m boundary were determined over a period of evaluation extending 20,000 years after SDF closure cap placement. These peak concentrations were provided to SRR to use as input for dose calculations.

  7. Final definition and preliminary design study for the initial atmospheric cloud physics laboratory, a Spacelab mission payload

    Science.gov (United States)

    1976-01-01

    The following areas related to the final definition and preliminary design study of the initial atmospheric cloud physics laboratory (ACPL) were covered: (1) proposal organization, personnel, schedule, and project management, (2) proposed configurations, (3) study objectives, (4) ACPL experiment program listing and description, (5) mission/flight flexibility and modularity/commonality, (6) study plan, and (7) description of following tasks: requirement analysis and definition task flow, systems analysis and trade studies, subsystem analysis and trade studies, specifications and interface control documents, preliminary design task flow, work breakdown structure, programmatic analysis and planning, and project costs. Finally, an overview of the scientific requirements was presented.

  8. Methodology of factorial design deriving guidelines for simulation of growth curve and production of sugars by Spirulina (Arthrospira) maxima

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    It is practical, economic and sometimes essential to derive rules or conclusions by performing lesser runs of experiments. In this part, a methodology based on 2f factorial design was brought up to derive guidelines to simulate growth curve and production of sugars by Spirulina (Arthrospira) maxima. The growth curve or accumulation process of sugars was idealized by sets of straight lines limited by phase transfers of growth or accumulation of sugars. Normal analyses of the critical values of the transfers were used to derive their linear relationships with the initial conditions of the experimental factors. These linear functions were called guidelines and were used to simulate the growth curve or accumulation of sugars. Generalization of the guideline technique was determined by the kinetic limitation of nutrient nitrogen or sulfur that was dependent upon their stoichiometric deficiency directly derived from their initial values in the medium. This method uses the initial conditions of culture and does not need measurements of concentrations of nitrate, sulfate and pigments during cultivation. It is a practical and useful alternative way to trace and predict approximately the growth curve and production of sugars by S. maxima.

  9. Preliminary Design and Simulation of a Turbo Expander for Small Rated Power Organic Rankine Cycle (ORC

    Directory of Open Access Journals (Sweden)

    Roberto Capata

    2014-11-01

    Full Text Available Nowadays, the Organic Rankine Cycle (ORC system, which operates with organic fluids, is one of the leading technologies for “waste energy recovery”. It works as a conventional Rankine Cycle but, as mentioned, instead of steam/water, an organic fluid is used. This change allows it to convert low temperature heat into electric energy where required. Large numbers of studies have been carried out to identify the most suitable fluids, system parameters and the various configurations. In the present market, most ORC systems are designed and manufactured for the recovery of thermal energy from various sources operating at “large power rating” (exhaust gas turbines, internal combustion engines, geothermal sources, large melting furnaces, biomass, solar, etc.; from which it is possible to produce a large amount of electric energy (30 kW ÷ 300 kW. Such applications for small nominal power sources, as well as the exhaust gases of internal combustion engines (car sedan or town, ships, etc. or small heat exchangers, are very limited. The few systems that have been designed and built for small scale applications, have, on the other hand, different types of expander (screw, scroll, etc.. These devices are not adapted for placement in small and restricted places like the interior of a conventional car. The aim of this work is to perform the preliminary design of a turbo-expander that meets diverse system requirements such as low pressure, small size and low mass flow rates. The expander must be adaptable to a small ORC system utilizing gas of a diesel engine or small gas turbine as thermal source to produce 2–10 kW of electricity. The temperature and pressure of the exhaust gases, in this case study (400–600 °C and a pressure of 2 bar, imposes a limit on the use of an organic fluid and on the net power that can be produced. In addition to water, fluids such as CO2, R134a and R245fa have been considered. Once the operating fluids has been chosen

  10. Design, Assembly and Preloading of Ball Bearings for Space Applications- Lessons Learned and Guidelines for Future Success

    Science.gov (United States)

    Videra, E.; Lebreton, C.; Lewis, S. D.; Gaillard, L.

    2013-09-01

    The use of ball bearings in the space industry is commonplace, with a broad range of applications from the most precise pointing mechanisms to extreme long -life and performance-demanding reaction wheels and simpler single-shot devices where precision, performance and life may be less difficult to achieve. Though most application developments are ultimately successful, the lessons learned from the incorrect implementation of ball bearings are, usually for understandable commercial reasons, not widely distributed - but often extremely valuable for industry.The organizations contributing to this paper have an unprecedentedly clear view of numerous spacecraft applications, both successful and otherwise, together with many years of experience in design, handling, lubricating, preloading and testing ball bearings for space applications.In order to help the space community to avoid design or handling errors in future, ESA has mandated bearing manufacturer ADR, and the European Space Tribology Laboratory (ESTL) to create a useful guideline which summarises both best practice and a distillation of the lessons learned from many programs.This paper presents a selection of the more valuable and generally applicable lessons learned by these organizations in the last 30-40 years together with an overview of the recently published guideline document itself [1] which embodies this experience and contains recommendations concerning ball bearing selection, design and conceptual rules and recommendations for assembly, preloading and verification testing.The novelty of this paper comes from the broad range of experiences and applications, both good and bad that the organisations concerned have observed and the publication (for the first time) of guidelines for use by the space mechanisms community in Europe.

  11. Utilization of Optimal Study Design for Maternal and Fetal Sheep Propofol Pharmacokinetics Study: A Preliminary Study

    Science.gov (United States)

    Sherwin, Catherine M. T.; Ngamprasertwong, Pornswan; Sadhasivam, Senthilkumar; Vinks, Alexander A.

    2017-01-01

    Multiple blood samples are generally required for measurement of pharmacokinetic (PK) parameters. D-optimal design is a popular and frequently used approach for determination of sampling time points in order to minimize the number of samples, while optimizing the estimation of PK parameters. Optimal design utilizing ADAPT (v5, BSR, University of Southern California, Los Angeles) developed a sparse sampling strategy to determine measurement of propofol in pregnant sheep. Propofal was administered as supplemental anesthetic agent to inhalation anesthesia to mimic anesthesia for open fetal surgery. In our preliminary study, propofol 3 mg/kg was given as a bolus to the ewe, followed by propofol infusion at rate 450 mcg/kg/min for 60 minutes, then decreased to 75 mcg/kg/min for 90 more minutes and then ceased. A three compartment model described the PK parameters with the fetus assumed as the third compartment. Initially, sampling times were chosen from thirteen time points as previously stated in the literature. Using priori propofol PK estimates, the final 9 sample time points were proposed in an optimal design with a change in infusion rate occurring between 65 and 75 minutes and sampling proposed at 5, 15, 25, 65, 75, 100, 110, 150, and 180 minutes. D-optimal design optimized the number and timing of samplings, which led to a reduction of cost and man power in the study protocol while preserving the ability to estimate propofol PK parameters in the maternal and fetal sheep model. Initial evaluation of samples collected from three sheep using the optimal design strategy confirmed the performance of the design in obtaining effective PK parameter estimates. PMID:24219004

  12. Medical chilling device designed for hypothermic hydration graft storage system: Design, thermohydrodynamic modeling, and preliminary testing

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Jung Hwan [Hongik University, Seoul (Korea, Republic of)

    2015-02-15

    Hypothermic hydration graft storage is essential to reduce the metabolic demand of cells in vitro. The alleviated metabolic demands reduce the emergence rate of anaerobic metabolism generating adenosine triphosphate (ATP) energy that creates free radicals. The cessive free radicals can damage cells and tissues due to their highly oxidative power with molecules. Current cooling systems such as a conventional air cooling system and an ice pack system are inappropriate for chilling cell tissues in vitro because of inconvenience in use and inconsistent temperature sustainability caused by large size and progressive melting, respectively. Here, we develop a medical chilling device (MCD) for hypothermic hydration graft storage based on thermo-hydrodynamic modeling and thermal electric cooling technology. Our analysis of obtained hydrodynamic thermal behavior of the MCD revealed that the hypothermic condition of 4 .deg. C was continuously maintained, which increased the survival rates of cells in vitro test by reduced free radicals. The validated performance of the MCD promises future development of an optimal hypothermic hydration graft storage system designed for clinical use.

  13. Safety Standard for Hydrogen and Hydrogen Systems: Guidelines for Hydrogen System Design, Materials Selection, Operations, Storage and Transportation. Revision

    Science.gov (United States)

    1997-01-01

    The NASA Safety Standard, which establishes a uniform process for hydrogen system design, materials selection, operation, storage, and transportation, is presented. The guidelines include suggestions for safely storing, handling, and using hydrogen in gaseous (GH2), liquid (LH2), or slush (SLH2) form whether used as a propellant or non-propellant. The handbook contains 9 chapters detailing properties and hazards, facility design, design of components, materials compatibility, detection, and transportation. Chapter 10 serves as a reference and the appendices contained therein include: assessment examples; scaling laws, explosions, blast effects, and fragmentation; codes, standards, and NASA directives; and relief devices along with a list of tables and figures, abbreviations, a glossary and an index for ease of use. The intent of the handbook is to provide enough information that it can be used alone, but at the same time, reference data sources that can provide much more detail if required.

  14. Simulation as a tool to develop guidelines for the design of portable library in the campus of Mansoura university

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Ahmed Nabih; Farag, M.A.; Samann Osama, Mina Michael; El Aishy, Alaa Shams [Department of Architectural Engineering, University of Mansoura (Egypt)

    2010-07-01

    In recent years, due to population growth, the numbers of enrolled students in Mansoura University, Egypt, has significantly increased, leading to a lack of library space. As a solution to this issue, the aim of this paper is to present the design procedures for building a portable library. The process consists of conducting a feasibility study, then identifying the most relevant parameters and using a software to create an energy efficient structure. A case study was conducted in Mansoura University on a portable library measuring 6.60mx9.90mx4.20m; simulations were carried out with the Ecotect simulation software. Results showed that the proposed methodology was successful in designing a portable library and that it allowed a reduction in energy consumption of 40% compared to the baseline case. This paper provided design guidelines for the construction of portable libraries through the use of transient building performance.

  15. Preliminary designs for modular OTEC platform station-keeping subsystems. Final report. MR and S Report No. 6042-6

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-29

    This volume of the report presents the results of the third through the sixth tasks of the Station Keeping Subsystem (SKSS) design studies for 10/40 MW/sub e/ capacity OTEC Modular Experiment platforms (MEP). Tasks 3 through 6 are: (3) complete preliminary designs for one SKSS for each of the two platforms (SPAR and BARGE); (4) development and testing recommendations for the MEP SKSS; (5) cost-time analysis; and (6) commercial plant recommendations. The overall conclusions and recommendations for the modular, as well as the commercial, OTEC platform station keeping subsystems are delineated. The basic design assumptions made during the process, the technical approach followed, and the results of design iterations, reliability and performance analyses are given. A complete description of the preliminary design SKSS concept is presented. The summary cost estimates for each of the alternative SKSS concepts considered are presented and a time schedule for the recommended concept is provided. The effects of varying some of the important parameters used in SKSS design on the performance and cost of the mooring system are investigated and results presented. The tests required and other developmental recommendations in order to verify and confirm the basic design assumptions are discussed. Finally, the experience gained in the MEP preliminary designs are extended to future commercial OTEC plants' SKSS designs. (WHK)

  16. Chapter A10. Lakes and reservoirs: Guidelines for study design and sampling

    Science.gov (United States)

    Green, William R.; Robertson, Dale M.; Wilde, Franceska D.

    2015-09-29

    The National Field Manual for the Collection of Water-Quality Data (National Field Manual, NFM) is an online report with separately published chapters that provides the protocols and guidelines by which U.S. Geological Survey personnel obtain the data used to assess the quality of the Nation’s surface-water and groundwater resources. Chapter 10 reviews limnological principles, describes the characteristics that distinguish lakes from reservoirs, and provides guidance for developing temporal and spatial sampling strategies and data-collection approaches to be used in lake and reservoir environmental investigations.

  17. Telescopio San Pedro Mártir Observatory preliminary design and project approach

    Science.gov (United States)

    Teran, Jose; Lee, William H.; Richer, Michael G.; Sánchez, Beatriz S.; Urdaibay, David; Hill, Derek; Adriaanse, David; Hernandez-Limonchi, Regina

    2016-07-01

    The Instituto de Astronomia of the Universidad Nacional Autónoma de México (UNAM) along with Instituto Nacional de Astrofisica, Optica y Electronica, the University of Arizona and the Smithsonian Astrophysical Observatory are developing the Telescopio San Pedro Mártir (TSPM) project, a 6.5m diameter optical telescope. M3 Engineering and Technology Corp. (M3) is the design and construction management firm responsible for all site infrastructure, enclosure and support facilities. The Telescopio San Pedro Mártir project (TSPM) will be located within the San Pedro Mártir National Park in Baja California, Mexico at 2,830 m. above sea level, approximately 65 km. east of the Pacific Ocean, 55km west of the Sea of Cortes (Gulf of California) and 180km south of the United States and México border. The aim of the paper is to present the preliminary design of the site infrastructure, enclosure and support facilities to date and share the design and construction approach.

  18. Preliminary design of the full-Stokes UV and visible spectropolarimeter for UVMag/Arago

    CERN Document Server

    Pertenais, Martin; Pares, Laurent; Petit, Pascal; Snik, Frans; van Harten, Gerard

    2015-01-01

    The UVMag consortium proposed the space mission project Arago to ESA at its M4 call. It is dedicated to the study of the dynamic 3D environment of stars and planets. This space mission will be equipped with a high-resolution spectropolarimeter working from 119 to 888 nm. A preliminary optical design of the whole instrument has been prepared and is presented here. The design consists of the telescope, the instrument itself, and the focusing optics. Considering not only the scienti?c requirements, but also the cost and size constraints to ?t a M-size mission, the telescope has a 1.3 m diameter primary mirror and is a classical Cassegrain-type telescope that allows a polarization-free focus. The polarimeter is placed at this Cassegrain focus. This is the key element of the mission and the most challenging to be designed. The main challenge lies in the huge spectral range offered by the instrument; the polarimeter has to deliver the full Stokes vector with a high precision from the FUV (119 nm) to the NIR (888 nm...

  19. Design and preliminary evaluation of an exoskeleton for upper limb resistance training

    Science.gov (United States)

    Wu, Tzong-Ming; Chen, Dar-Zen

    2012-06-01

    Resistance training is a popular form of exercise recommended by national health organizations, such as the American College of Sports Medicine (ACSM) and the American Heart Association (AHA). This form of training is available for most populations. A compact design of upper limb exoskeleton mechanism for homebased resistance training using a spring-loaded upper limb exoskeleton with a three degree-of-freedom shoulder joint and a one degree-of-freedom elbow joint allows a patient or a healthy individual to move the upper limb with multiple joints in different planes. It can continuously increase the resistance by adjusting the spring length to train additional muscle groups and reduce the number of potential injuries to upper limb joints caused by the mass moment of inertia of the training equipment. The aim of this research is to perform a preliminary evaluation of the designed function by adopting an appropriate motion analysis system and experimental design to verify our prototype of the exoskeleton and determine the optimal configuration of the spring-loaded upper limb exoskeleton.

  20. Design concept and preliminary experimental demonstration of MEMS gyroscopes with 4-DOF master-slave architecture

    Science.gov (United States)

    Acar, Cenk; Shkel, Andrei M.

    2002-07-01

    This paper reports a design concept for MEMS gyroscopes that shifts the complexity of the design from control architecture to system dynamics, utilizing the passive disturbance rejection capability of the 4-DOF dynamical system. Specifically, a novel wide-bandwidth micromachined gyroscope design approach based on increasing the degrees-of-freedom of the oscillatory system by the use of two independently oscillating interconnected proof masses is presented along with preliminary experimental demonstration of implementation feasibility. With the concept of using a 4-DOF system, inherent disturbance rejection is achieved due to the wide operation frequency range of the dynamic system, providing reduced sensitivity to structural and thermal parameter fluctuations. Thus, less demanding active control strategies are required for operation under presence of perturbations. The fabricated prototype dual-mass gyroscopes successfully demonstrated a dramatically wide driving frequency range within where the drive direction oscillation amplitude varies insignificantly without any active control, in contrast to the conventional gyroscopes where the mass has to be sustained in constant amplitude oscillation in a very narrow frequency band. Mechanical amplification of driven mass oscillation by the sensing element was also experimentally demonstrated, providing large oscillation amplitudes, which is crucial for sensor performance.

  1. Preliminary GN&C Design for the On-Orbit Autonomous Assembly of Nanosatellite Demonstration Mission

    Science.gov (United States)

    Pei, Jing; Walsh, Matt; Roithmayr, Carlos; Karlgaard, Chris; Peck, Mason; Murchison, Luke

    2017-01-01

    Small spacecraft autonomous rendezvous and docking (ARD) is an essential technology for future space structure assembly missions. The On-orbit Autonomous Assembly of Nanosatellites (OAAN) team at NASA Langley Research Center (LaRC) intends to demonstrate the technology to autonomously dock two nanosatellites to form an integrated system. The team has developed a novel magnetic capture and latching mechanism that allows for docking of two CubeSats without precise sensors and actuators. The proposed magnetic docking hardware not only provides the means to latch the CubeSats, but it also significantly increases the likelihood of successful docking in the presence of relative attitude and position errors. The simplicity of the design allows it to be implemented on many CubeSat rendezvous missions. Prior to demonstrating the docking subsystem capabilities on orbit, the GN&C subsystem should have a robust design such that it is capable of bringing the CubeSats from an arbitrary initial separation distance of as many as a few thousand kilometers down to a few meters. The main OAAN Mission can be separated into the following phases: 1) Launch, checkout, and drift, 2) Far-Field Rendezvous or Drift Recovery, 3) Proximity Operations, 4) Docking. This paper discusses the preliminary GN&C design and simulation results for each phase of the mission.

  2. Preliminary Safety Design Report for Remote Handled Low-Level Waste Disposal Facility

    Energy Technology Data Exchange (ETDEWEB)

    Timothy Solack; Carol Mason

    2012-03-01

    A new onsite, remote-handled low-level waste disposal facility has been identified as the highest ranked alternative for providing continued, uninterrupted remote-handled low-level waste disposal for remote-handled low-level waste from the Idaho National Laboratory and for nuclear fuel processing activities at the Naval Reactors Facility. Historically, this type of waste has been disposed of at the Radioactive Waste Management Complex. Disposal of remote-handled low-level waste in concrete disposal vaults at the Radioactive Waste Management Complex will continue until the facility is full or until it must be closed in preparation for final remediation of the Subsurface Disposal Area (approximately at the end of Fiscal Year 2017). This preliminary safety design report supports the design of a proposed onsite remote-handled low-level waste disposal facility by providing an initial nuclear facility hazard categorization, by discussing site characteristics that impact accident analysis, by providing the facility and process information necessary to support the hazard analysis, by identifying and evaluating potential hazards for processes associated with onsite handling and disposal of remote-handled low-level waste, and by discussing the need for safety features that will become part of the facility design.

  3. New shipyard layout design for the preliminary phase & case study for the green field project

    Directory of Open Access Journals (Sweden)

    Young Joo Song

    2013-03-01

    Full Text Available For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

  4. Preliminary optical design of PANIC, a wide-field infrared camera for CAHA

    Science.gov (United States)

    Cárdenas, M. C.; Rodríguez Gómez, J.; Lenzen, R.; Sánchez-Blanco, E.

    2008-07-01

    In this paper, we present the preliminary optical design of PANIC (PAnoramic Near Infrared camera for Calar Alto), a wide-field infrared imager for the Calar Alto 2.2 m telescope. The camera optical design is a folded single optical train that images the sky onto the focal plane with a plate scale of 0.45 arcsec per 18 μm pixel. A mosaic of four Hawaii 2RG of 2k x 2k made by Teledyne is used as detector and will give a field of view of 31.9 arcmin x 31.9 arcmin. This cryogenic instrument has been optimized for the Y, J, H and K bands. Special care has been taken in the selection of the standard IR materials used for the optics in order to maximize the instrument throughput and to include the z band. The main challenges of this design are: to produce a well defined internal pupil which allows reducing the thermal background by a cryogenic pupil stop; the correction of off-axis aberrations due to the large field available; the correction of chromatic aberration because of the wide spectral coverage; and the capability of introduction of narrow band filters (~1%) in the system minimizing the degradation in the filter passband without a collimated stage in the camera. We show the optomechanical error budget and compensation strategy that allows our as built design to met the performances from an optical point of view. Finally, we demonstrate the flexibility of the design showing the performances of PANIC at the CAHA 3.5m telescope.

  5. Ocean thermal energy conversion power system development-I. Phase I. Preliminary design report. Volume 1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-18

    The results of a conceptual and preliminary design study of Ocean Thermal Energy Conversion (OTEC) closed loop ammonia power system modules performed by Lockheed Missiles and Space Company, Inc. (LMSC) are presented. This design study is the second of 3 tasks in Phase I of the Power System Development-I Project. The Task 2 objectives were to develop: 1) conceptual designs for a 40 to 50-MW(e) closed cycle ammonia commercial plant size power module whose heat exchangers are immersed in seawater and whose ancillary equipments are in a shirt sleeve environment; preliminary designs for a modular application power system sized at 10-MW(e) whose design, construction and material selection is analogous to the 50 MW(e) module, except that titanium tubes are to be used in the heat exchangers; and 3) preliminary designs for heat exchanger test articles (evaporator and condenser) representative of the 50-MW(e) heat exchangers using aluminum alloy, suitable for seawater service, for testing on OTEC-1. The reference ocean platform was specified by DOE as a surface vessel with the heat exchanger immersed in seawater to a design depth of 0 to 20 ft measured from the top of the heat exchanger. For the 50-MW(e) module, the OTEC 400-MW(e) Plant Ship, defined in the Platform Configuration and Integration study, was used as the reference platform. System design, performance, and cost are presented. (WHK)

  6. Flying Qualities Metrics and Design Guidelines for Modern Transport Aircraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Current and planned transport aircraft designs are making more use of fly-by-wire technology, allowing an unprecedented design space for control laws, including...

  7. Aseismic Design Licensings and guidelines for nuclear power plant in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yoshizawa, Kazumi [Agency of Natural Resources and Energy, Tokyo (Japan)

    1997-03-01

    This paper describes Aseismic Design Licensing for Japanese Nuclear Power Plants which includes system, procedures and brief contents concerned application, permit and inspection, and the `Examination Guide for Aseismic Design of the Nuclear Power Reactor Facilities` which focused principals of seismic design loads, load combinations, and allowable limits. (J.P.N.)

  8. Grid connected integrated community energy system. Phase II: final stage 2 report. Preliminary design of cogeneration plant

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-22

    The preliminary design of a dual-purpose power plant to be located on the University of Minnesota is described. This coal-fired plant will produce steam and electric power for a grid-connected Integrated Community Energy System. (LCL)

  9. Preliminary design of a vacuum pressure swing adsorption process for natural gas upgrading based on amino-functionalized MIL-53

    NARCIS (Netherlands)

    Serra-Crespo, P.; Wezendonk, T.A.; Bach-Samario, C.; Sundar, N.; Verouden, K.; Zweemer, M.; Gascon, J.; van den Berg, Henderikus; Kapteijn, F.

    2015-01-01

    A preliminary study based on a conceptual process design methodology that includes a technical evaluation and an economic study has been carried out for the use of the metal-organic framework NH2-MIL-53(Al) as adsorbent for the separation of carbon dioxide from methane. Among the alternatives

  10. Design and preliminary test of a free-air ionization chamber for low-energy X-ray

    Institute of Scientific and Technical Information of China (English)

    吴金杰; 杨元第; 王培玮; 陈靖; 柳加成

    2011-01-01

    A free-air ionization chamber in low-energy X-ray has been designed and manufactured at the National Institute of Metrology (NIM, China) according to the defination of air-kerma. The results of a preliminary test show that the leakage current of ionizatio

  11. DEMONSTRATION OF FUEL CELLS TO RECOVER ENERGY FROM ANAEROBIC DIGESTER GAS - PHASE I. CONCEPTUAL DESIGN, PRELIMINARY COST, AND EVALUATION STUDY

    Science.gov (United States)

    The report discusses Phase I (a conceptual design, preliminary cost, and evaluation study) of a program to demonstrate the recovery of energy from waste methane produced by anaerobic digestion of waste water treatment sludge. The fuel cell is being used for this application becau...

  12. DEMONSTRATION OF FUEL CELLS TO RECOVER ENERGY FROM ANAEROBIC DIGESTER GAS - PHASE I. CONCEPTUAL DESIGN, PRELIMINARY COST, AND EVALUATION STUDY

    Science.gov (United States)

    The report discusses Phase I (a conceptual design, preliminary cost, and evaluation study) of a program to demonstrate the recovery of energy from waste methane produced by anaerobic digestion of waste water treatment sludge. The fuel cell is being used for this application becau...

  13. Preliminary design of a small air loop for system analysis and validation of Cathare code

    Energy Technology Data Exchange (ETDEWEB)

    Marchand, M.; Saez, M.; Tauveron, N.; Tenchine, D.; Germain, T.; Geffraye, G.; Ruby, G.P. [CEA Grenoble (DEN/DER/SSTH), 38 (France)

    2007-07-01

    The French Atomic Energy Commission (Cea) is carrying on the design of a Small Air Loop for System Analysis (SALSA), devoted to the study of gas cooled nuclear reactors behaviour in normal and incidental/accidental operating conditions. The reduced size of the SALSA components compared to a full-scale reactor and air as gaseous coolant instead of Helium will allow an easy management of the loop. The main purpose of SALSA will be the validation of the associated thermal hydraulic safety simulation codes, like CATHARE. The main goal of this paper is to present the methodology used to define the characteristics of the loop. In a first step, the study has been focused on a direct-cycle system for the SALSA loop with few global constraints using a similarity analysis to support the definition and design of the loop. Similarity requirements have been evaluated to determine the scale factors which have to be applied to the SALSA loop components. The preliminary conceptual design of the SALSA plant with a definition of each component has then be carried out. The whole plant has been modelled using the CATHARE code. Calculations of the SALSA steady-state in nominal conditions and of different plant transients in direct-cycle have been made. The first system results obtained on the global behaviour of the loop confirm that SALSA can be representative of a Gas-Cooled nuclear reactor with some minor design modifications. In a second step, the current prospects focus on the SALSA loop capability to reproduce correctly the heat transfer occurring in specific incidental situations. Heat decay removal by natural convection is a crucial point of interest. The first results show that the behaviour and the efficiency of the loop are strongly influenced by the definition of the main parameters for each component. A complete definition of SALSA is under progress. (authors)

  14. Preliminary conceptual design of a Demonstration Tokamak Hybrid Reactor (DTHR). Status report, January 1978--March 1978

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, J.L. (ed.)

    1978-03-01

    The DTHR preliminary conceptual design consists of a magnetically confined fusion reactor fitted with a fertile thorium blanket. The fusion driver concept is based on a beam driven plasma, but at sufficiently high plasma densities that neutrons originating from the interactions of bulk plasma ions contribute significantly to the wall loading. The tokamak has a major radius of 5.2 m, a minor radius of 1.2 m, and the elongation is 1.6. All of the magnetic coil systems are superconducting Nb/sub 3/Sn based on the Large Coil Project (LCP) technology. The toroidal field (TF) coils employ an innovative concept, the ''compact D'' configuration. An engineered bundle divertor concept has been developed based on the bundle divertor design techniques developed for TNS and ISX-B. A thermal power of 150MW of 200 keV deuterium is injected into the plasma through six ducts of a positive ion, neutral beam injection system (NBIS). A water cooled, 316 stainless steel vacuum vessel concept was developed and initial scoping analyses look encouraging. The fusile fuel handling system was evaluated and defined. Details of the tritium injection system remain to be developed. Tritium breeding will be assessed in subsequent phases of the DTHR operation. The fusion driver provides a neutron first wall loading of 2MW/m/sup 2/ for fissile production in the blanket.

  15. SolarOil Project, Phase I preliminary design report. [Solar Thermal Enhanced Oil Recovery project

    Energy Technology Data Exchange (ETDEWEB)

    Baccaglini, G.; Bass, J.; Neill, J.; Nicolayeff, V.; Openshaw, F.

    1980-03-01

    The preliminary design of the Solar Thermal Enhanced Oil Recovery (SolarOil) Plant is described in this document. This plant is designed to demonstrate that using solar thermal energy is technically feasible and economically viable in enhanced oil recovery (EOR). The SolarOil Plant uses the fixed mirror solar concentrator (FMSC) to heat high thermal capacity oil (MCS-2046) to 322/sup 0/C (611/sup 0/F). The hot fluid is pumped from a hot oil storage tank (20 min capacity) through a once-through steam generator which produces 4.8 MPa (700 psi) steam at 80% quality. The plant net output, averaged over 24 hr/day for 365 days/yr, is equivalent to that of a 2.4 MW (8.33 x 10/sup 6/ Btu/hr) oil-fired steam generator having an 86% availability. The net plant efficiency is 57.3% at equinox noon, a 30%/yr average. The plant will be demonstrated at an oilfield site near Oildale, California.

  16. New technologies and new performances of the JCMT radio-telescope: a preliminary design study

    Science.gov (United States)

    Mian, S.; De Lorenzi, S.; Ghedin, L.; Rampini, F.; Marchiori, G.; Craig, S.

    2012-09-01

    With a diameter of 15m the James Clerk Maxwell Telescope (JCMT) is the largest astronomical telescope in the world designed specifically to operate in the submillimeter wavelength region of the spectrum. It is situated close to the summit of Mauna Kea, Hawaii, at an altitude of 4092m. Its primary reflector currently consists of a steel geodesic supporting structure and pressed aluminium panels on a passive mount. The major issues of the present reflector are its thermal stability and its panels deterioration. A preliminary design study for the replacement of the JCMT antenna dish is here presented. The requested shape error for the new reflector is antenna performance in terms of both stiffness and thermal stability, so that the required surface accuracy of the primary can be achieved even by adopting a passive panels system. Moreover thanks to CFRP, a considerable weight reduction of the elevation structure can be attained. The performance of the proposed solution for the JCMT antenna has been investigated through FE analyses and the assessed deformation of the structure under different loading cases has been taken into account for subsequent error budgeting. Results show that the proposed solution is in line with the requested performance. With this new backing structure, the JCMT would have the largest CFRP reflector ever built.

  17. Mechanical Safety Subcommittee Guideline for Design of Thin Windows Regarding Roark’s Edge Condition Coefficient

    Energy Technology Data Exchange (ETDEWEB)

    Ader, C. [Fermilab; Voirin, E. [Fermilab; McGee, M. [Fermilab; Nobrega, L. [Fermilab

    2017-06-15

    An error was found in an edge stress coefficient used to calculate stresses in thin windows. This error is present in “Roark’s Formulas for Stress and Strain” 7th and 8th Edition. The 6th Edition is correct. This guideline specially discusses a major difference in regards to a coefficient used in calculating the edge stress in “Roark’s Formulas for Stress and Strain” 6th Edition compared to the 7th and 8th Editions. In Chapter 10: Flat Plates under “Circular plates under distributed load producing large deflections,” Case 3, which is “Fixed and held. Uniform pressure q over entire plate.” The coefficient for a fixed edge condition in the 6th Edition1 K4 = 0.476 while in the 7th and 8th Edition2, the coefficient is 1.73 which is significant difference.

  18. A fast-track preliminary thermo-mechanical design of oil export pipelines from P-56 platform

    Energy Technology Data Exchange (ETDEWEB)

    Solano, Rafael F.; Mendonca, Salete M. de [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Franco, Luciano D.; Walker, Alastair; El-Gebaly, Sherif H. [INTECSEA, Rio de Janeiro, RJ (Brazil)

    2009-12-19

    The oil export pipelines of Marlim Sul field Module 3, Campus Basin, offshore Brazil, will operate in high pressure and temperature conditions, and will be laid on seabed crossing ten previously laid pipelines along the routes. In terms of thermo-mechanical design, these conditions turn out to be great challenges. In order to obtain initial results and recommendations for detail design, a preliminary thermo-mechanical design of pipelines was carried out as a fast-track design before the bid. This way, PETROBRAS can assess and emphasize the susceptibility of these lines to lateral buckling and pipeline walking behavior. Therefore, PETROBRAS can present a preliminary mitigation strategy for lateral buckling showing solutions based on displacement controlled criteria and by introducing buckle initiation along the pipeline using distribution buoyancy. Besides that, axial displacements and loads at the pipeline ends can be furnished also in order to provide a basis for the detailed design. The work reported in this paper follows the SAFEBUCK JIP methodology and recommendation, which were used to determine the allowable strain and maximum allowable VAS (Virtual Anchor Spacing) considered in the buckling mitigation strategy. The paper presents also the formation of uncontrolled buckles on the seabed and the propensity for pipeline walking in its sections between buckles. The buckling mitigation strategy established in this preliminary design confirms that the oil pipeline specifications are adequate to maintain integrity during design life. (author)

  19. Design guidelines for adapting scientific research articles: An example from an introductory level, interdisciplinary program on soft matter

    Science.gov (United States)

    Langbeheim, Elon; Safran, Samuel A.; Yerushalmi, Edit

    2013-01-01

    We present design guidelines for using Adapted Primary Literature (APL) as part of current interdisciplinary topics to introductory physics students. APL is a text genre that allows students to comprehend a scientific article, while maintaining the core features of the communication among scientists, thus representing an authentic scientific discourse. We describe the adaptation of a research paper by Nobel Laureate Paul Flory on phase equilibrium in polymer-solvent mixtures that was presented to high school students in a project-based unit on soft matter. The adaptation followed two design strategies: a) Making explicit the interplay between the theory and experiment. b) Re-structuring the text to map the theory onto the students' prior knowledge. Specifically, we map the theory of polymer-solvent systems onto a model for binary mixtures of small molecules of equal size that was already studied in class.

  20. Improving guideline concordance in multidisciplinary teams: preliminary results of a cluster-randomized trial evaluating the effect of a web-based audit and feedback intervention with outreach visits.

    Science.gov (United States)

    van Engen-Verheul, Mariëtte M; Gude, Wouter T; van der Veer, Sabine N; Kemps, Hareld M C; Jaspers, Monique M W; de Keizer, Nicolette F; Peek, Niels

    2015-01-01

    Despite their widespread use, audit and feedback (A&F) interventions show variable effectiveness on improving professional performance. Based on known facilitators of successful A&F interventions, we developed a web-based A&F intervention with indicator-based performance feedback, benchmark information, action planning and outreach visits. The goal of the intervention was to engage with multidisciplinary teams to overcome barriers to guideline concordance and to improve overall team performance in the field of cardiac rehabilitation (CR). To assess its effectiveness we conducted a cluster-randomized trial in 18 CR clinics (14,847 patients) already working with computerized decision support (CDS). Our preliminary results showed no increase in concordance with guideline recommendations regarding prescription of CR therapies. Future analyses will investigate whether our intervention did improve team performance on other quality indicators.

  1. Improving guideline concordance in multidisciplinary teams: preliminary results of a cluster-randomized trial evaluating the effect of a web-based audit and feedback intervention with outreach visits

    Science.gov (United States)

    van Engen-Verheul, Mariëtte M.; Gude, Wouter T.; van der Veer, Sabine N.; Kemps, Hareld M.C.; Jaspers, Monique M.W.; de Keizer, Nicolette F.; Peek, Niels

    2015-01-01

    Despite their widespread use, audit and feedback (A&F) interventions show variable effectiveness on improving professional performance. Based on known facilitators of successful A&F interventions, we developed a web-based A&F intervention with indicator-based performance feedback, benchmark information, action planning and outreach visits. The goal of the intervention was to engage with multidisciplinary teams to overcome barriers to guideline concordance and to improve overall team performance in the field of cardiac rehabilitation (CR). To assess its effectiveness we conducted a cluster-randomized trial in 18 CR clinics (14,847 patients) already working with computerized decision support (CDS). Our preliminary results showed no increase in concordance with guideline recommendations regarding prescription of CR therapies. Future analyses will investigate whether our intervention did improve team performance on other quality indicators. PMID:26958310

  2. Sustainability certification systems as guidelines for early-phase urban design processes

    DEFF Research Database (Denmark)

    Jensen, Lotte Bjerregaard; Bjerre, Lærke; Mansfelt, Lise

    2016-01-01

    The German Sustainable Building Council (Deutsche Gesellschaft für Nachhaltiges Bauen or DGNB) has one of the most comprehensive sustainability certification systems for urban districts (UD). Their explicit aim is that the system should impact the very earliest design decisions. The Technical...... University of Denmark has tested the DGNB-UD system in two experimental design projects for similar locations to find out how it can be used in the early-phase design process. This paper describes these two independent design processes, compares them and discusses their general features. We found that DGNB......-UD addresses a broad sustainable focus and can be used as a tool for setting sustainability goals from the very first design steps. The system tends to promote multifunctional compromise solutions that meet several criteria at the same time. Using the DGNB-UD certification system in the early design phases...

  3. Near Term Hybrid Passenger Vehicle Development Program. Phase I, Final report. Appendix C: preliminary design data package. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    Piccolo, R.

    1979-07-31

    The assumptions made, analysis methods used, and preliminary results of research to determine the design specifications for a hybrid electric-powered and internal combustion engine-powered vehicle that would optimize the fuel economy of passenger automobiles are described. Information is included on body and component design, selection of spark-ignition engine and Ni-Zn batteries, life-cycle costs and life-cycle fuel consumption. (LCL)

  4. Guideline for bolted joint design and analysis : version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Kevin H.; Morrow, Charles W.; Durbin, Samuel; Baca, Allen

    2008-01-01

    This document provides general guidance for the design and analysis of bolted joint connections. An overview of the current methods used to analyze bolted joint connections is given. Several methods for the design and analysis of bolted joint connections are presented. Guidance is provided for general bolted joint design, computation of preload uncertainty and preload loss, and the calculation of the bolted joint factor of safety. Axial loads, shear loads, thermal loads, and thread tear out are used in factor of safety calculations. Additionally, limited guidance is provided for fatigue considerations. An overview of an associated Mathcad{copyright} Worksheet containing all bolted joint design formulae presented is also provided.

  5. Preliminary issues associated with the next generation nuclear plant intermediate heat exchanger design.

    Energy Technology Data Exchange (ETDEWEB)

    Natesan, K.; Moisseytsev, A.; Majumdar, S.; Shankar, P. S.; Nuclear Engineering Division

    2007-04-05

    The Next Generation Nuclear Plant (NGNP), which is an advanced high temperature gas reactor (HTGR) concept with emphasis on production of both electricity and hydrogen, involves helium as the coolant and a closed-cycle gas turbine for power generation with a core outlet/gas turbine inlet temperature of 900-1000 C. In the indirect cycle system, an intermediate heat exchanger is used to transfer the heat from primary helium from the core to the secondary fluid, which can be helium, nitrogen/helium mixture, or a molten salt. The system concept for the vary high temperature reactor (VHTR) can be a reactor based on the prismatic block of the GT-MHR developed by a consortium led by General Atomics in the U.S. or based on the PBMR design developed by ESKOM of South Africa and British Nuclear Fuels of U.K. This report has made a preliminary assessment on the issues pertaining to the intermediate heat exchanger (IHX) for the NGNP. Two IHX designs namely, shell and tube and compact heat exchangers were considered in the assessment. Printed circuit heat exchanger, among various compact heat exchanger (HX) designs, was selected for the analysis. Irrespective of the design, the material considerations for the construction of the HX are essentially similar, except may be in the fabrication of the units. As a result, we have reviewed in detail the available information on material property data relevant for the construction of HX and made a preliminary assessment of several relevant factors to make a judicious selection of the material for the IHX. The assessment included four primary candidate alloys namely, Alloy 617 (UNS N06617), Alloy 230 (UNS N06230), Alloy 800H (UNS N08810), and Alloy X (UNS N06002) for the IHX. Some of the factors addressed in this report are the tensile, creep, fatigue, creep fatigue, toughness properties for the candidate alloys, thermal aging effects on the mechanical properties, American Society of Mechanical Engineers (ASME) Code compliance

  6. Preliminary Design of the Guidance, Navigation, and Control System of the Altair Lunar Lander

    Science.gov (United States)

    Lee, Allan Y.; Ely, Todd; Sostaric, Ronald; Strahan, Alan; Riedel, Joseph E.; Ingham, Mitch; Wincentsen, James; Sarani, Siamak

    2010-01-01

    Guidance, Navigation, and Control (GN&C) is the measurement and control of spacecraft position, velocity, and attitude in support of mission objectives. This paper provides an overview of a preliminary design of the GN&C system of the Lunar Lander Altair. Key functions performed by the GN&C system in various mission phases will first be described. A set of placeholder GN&C sensors that is needed to support these functions is next described. To meet Crew safety requirements, there must be high degrees of redundancy in the selected sensor configuration. Two sets of thrusters, one on the Ascent Module (AM) and the other on the Descent Module (DM), will be used by the GN&C system. The DM thrusters will be used, among other purposes, to perform course correction burns during the Trans-lunar Coast. The AM thrusters will be used, among other purposes, to perform precise angular and translational controls of the ascent module in order to dock the ascent module with Orion. Navigation is the process of measurement and control of the spacecraft's "state" (both the position and velocity vectors of the spacecraft). Tracking data from the Earth-Based Ground System (tracking antennas) as well as data from onboard optical sensors will be used to estimate the vehicle state. A driving navigation requirement is to land Altair on the Moon with a landing accuracy that is better than 1 km (radial 95%). Preliminary performance of the Altair GN&C design, relative to this and other navigation requirements, will be given. Guidance is the onboard process that uses the estimated state vector, crew inputs, and pre-computed reference trajectories to guide both the rotational and the translational motions of the spacecraft during powered flight phases. Design objectives of reference trajectories for various mission phases vary. For example, the reference trajectory for the descent "approach" phase (the last 3-4 minutes before touchdown) will sacrifice fuel utilization efficiency in order to

  7. Preliminary Design of the Guidance, Navigation, and Control System of the Altair Lunar Lander

    Science.gov (United States)

    Lee, Allan Y.; Ely, Todd; Sostaric, Ronald; Strahan, Alan; Riedel, Joseph E.; Ingham, Mitch; Wincentsen, James; Sarani, Siamak

    2010-01-01

    Guidance, Navigation, and Control (GN&C) is the measurement and control of spacecraft position, velocity, and attitude in support of mission objectives. This paper provides an overview of a preliminary design of the GN&C system of the Lunar Lander Altair. Key functions performed by the GN&C system in various mission phases will first be described. A set of placeholder GN&C sensors that is needed to support these functions is next described. To meet Crew safety requirements, there must be high degrees of redundancy in the selected sensor configuration. Two sets of thrusters, one on the Ascent Module (AM) and the other on the Descent Module (DM), will be used by the GN&C system. The DM thrusters will be used, among other purposes, to perform course correction burns during the Trans-lunar Coast. The AM thrusters will be used, among other purposes, to perform precise angular and translational controls of the ascent module in order to dock the ascent module with Orion. Navigation is the process of measurement and control of the spacecraft's "state" (both the position and velocity vectors of the spacecraft). Tracking data from the Earth-Based Ground System (tracking antennas) as well as data from onboard optical sensors will be used to estimate the vehicle state. A driving navigation requirement is to land Altair on the Moon with a landing accuracy that is better than 1 km (radial 95%). Preliminary performance of the Altair GN&C design, relative to this and other navigation requirements, will be given. Guidance is the onboard process that uses the estimated state vector, crew inputs, and pre-computed reference trajectories to guide both the rotational and the translational motions of the spacecraft during powered flight phases. Design objectives of reference trajectories for various mission phases vary. For example, the reference trajectory for the descent "approach" phase (the last 3-4 minutes before touchdown) will sacrifice fuel utilization efficiency in order to

  8. Designing guidelines for product’s self-marketing. Case: creating a graphic print design for Bagnanas bag.

    OpenAIRE

    Pilch, Malgorzata

    2014-01-01

    Design and marketing are interconnected. The two disciplines at first seem to deal with very different areas of expertise, but are in fact connected in many ways, particularly when looking at a role of design in marketing. The specific focus of the thesis is on visual marketing and graphic design. A common feature of both marketing and design is communication. The main goal of the two disciplines is to convey the desired message to a specified target group in order to influence its emotio...

  9. Central receiver solar thermal power system. Phase 1. CDRL item 2; Pilot Plant preliminary design report. Volume II. System decription and system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hallet, Jr., R. W.; Gervais, R. L.

    1977-10-01

    An active system analysis and integration effort has been maintained. These activities have included the transformation of initial program requirements into a preliminary system design, the evolution of subsystem requirements which lay the foundation for subsystem design and test activity, and the overseeing of the final preliminary design effort to ensure that the subsystems are operationally compatible and capable of producing electricity at the lowest possible cost per unit of energy. Volume II of the Preliminary Design Report presents the results of the overall system effort that went on during this contract. The effort is assumed to include not only the total system definition and design but also all subsystem interactions.

  10. User-Centered Design Guidelines for Collaborative Software for Intelligence Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Scholtz, Jean; Endert, Alexander N.

    2014-08-01

    In this position paper we discuss the necessity of using User-Centered Design (UCD) methods in order to design collaborative software for the intelligence community. We present some standing issues in collaborative software based on existing work within the intelligence community. Based on this information we present opportunities to address some of these challenges.

  11. Literary and Historical 3D Digital Game-Based Learning: Design Guidelines

    Science.gov (United States)

    Neville, David O.; Shelton, Brett E.

    2010-01-01

    As 3D digital game-based learning (3D-DGBL) for the teaching of literature and history gradually gains acceptance, important questions will need to be asked regarding its method of design, development, and deployment. This article offers a synthesis of contemporary pedagogical, instructional design, new media, and literary-historical theories to…

  12. Literary and Historical 3D Digital Game-Based Learning: Design Guidelines

    Science.gov (United States)

    Neville, David O.; Shelton, Brett E.

    2010-01-01

    As 3D digital game-based learning (3D-DGBL) for the teaching of literature and history gradually gains acceptance, important questions will need to be asked regarding its method of design, development, and deployment. This article offers a synthesis of contemporary pedagogical, instructional design, new media, and literary-historical theories to…

  13. Creating design guidelines for a navigational aid for mild demented pedestrians

    NARCIS (Netherlands)

    Hagethorn, F.N.; Kröse, B.J.A.; de Greef, P.; Helmer, M.E.

    2008-01-01

    In this paper we describe our project in which we study design options for a GPS-based navigation aid for elderly with beginning dementia. In a user centered approach we first studied problems of the target group. Results were used in the design of a WoZ prototype. The method proved to work very

  14. Preliminary Design of a Helium-Cooled Ceramic Breeder Blanket for CFETR Based on the BIT Concept

    Science.gov (United States)

    Ma, Xuebin; Liu, Songlin; Li, Jia; Pu, Yong; Chen, Xiangcun

    2014-04-01

    CFETR is the “ITER-like” China fusion engineering test reactor. The design of the breeding blanket is one of the key issues in achieving the required tritium breeding radio for the self-sufficiency of tritium as a fuel. As one option, a BIT (breeder insider tube) type helium cooled ceramic breeder blanket (HCCB) was designed. This paper presents the design of the BIT—HCCB blanket configuration inside a reactor and its structure, along with neutronics, thermo-hydraulics and thermal stress analyses. Such preliminary performance analyses indicate that the design satisfies the requirements and the material allowable limits.

  15. Guidelines for Initiating a Research Agenda: Research Design and Dissemination of Results.

    Science.gov (United States)

    Delost, Maria E; Nadder, Teresa S

    2014-01-01

    Successful research outcomes require selection and implementation of the appropriate research design. A realistic sampling plan appropriate for the design is essential. Qualitative or quantitative methodology may be utilized, depending on the research question and goals. Quantitative research may be experimental where there is an intervention, or nonexperimental, if no intervention is included in the design. Causation can only be established with experimental research. Popular types of nonexperimental research include descriptive and survey research. Research findings may be disseminated via presentations, posters, and publications, such as abstracts and manuscripts.

  16. Guidelines for the integrated planning and design of underground coal mines.

    CSIR Research Space (South Africa)

    Fourie, GA

    2001-11-01

    Full Text Available Mine planning and design involves the compilation and integration of all relevant geological, geotechnical, mining, engineering and economic data into a single document to define and describe the exploitation strategy for a particular mineral...

  17. Georgetown University Integrated Community Energy System (GU-ICES). Phase III, Stage II. Preliminary design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-11-01

    Results are presented for two elements in the Georgetown University ICES program - the installation of a 2500-kW backpressure steam-turbine generator within a new extension to the heating and cooling plant (cogeneration) and the provision of four additional ash silos for the university's atmospheric fluidized-bed boiler plant (added storage scheme). The preliminary design and supporting documentation for the work items and architectural drawings are presented. Section 1 discusses the basis for the report, followed by sections on: feasibility analysis update; preliminary design documents; instrumentation and testing; revised work management plan; and appendices including outline constructions, turbine-generator prepurchase specification, design calculations, cost estimates, and Potomac Electric Company data. (MCW)

  18. Design and preliminary validation of a tool for the simulation of train braking performance

    Institute of Scientific and Technical Information of China (English)

    Luca Pugi; Monica Malvezzi; Susanna Papini; Gregorio Vettori

    2013-01-01

    Train braking performance is important for the safety and reliability of railway systems. The availability of a tool that allows evaluating such performance on the basis of the main train features can be useful for train system designers to choose proper dimensions for and optimize train’s subsystems. This paper presents a modular tool for the prediction of train braking performance, with a par-ticular attention to the accurate prediction of stopping distances. The tool takes into account different loading and operating conditions, in order to verify the safety require-ments prescribed by European technical specifications for interoperability of high-speed trains and the corresponding EN regulations. The numerical results given by the tool were verified and validated by comparison with experi-mental data, considering as benchmark case an Ansaldo EMU V250 train-a European high-speed train-currently developed for Belgium and Netherlands high-speed lines, on which technical information and experimental data directly recorded during the preliminary tests were avail-able. An accurate identification of the influence of the braking pad friction factor on braking performances allowed obtaining reliable results.

  19. Kelly Hot Spring Geothermal Project: Kelly Hot Spring Agricultural Center preliminary design. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Longyear, A.B. (ed.)

    1980-08-01

    A Phase 1 Preliminary Design, Construction Planning and Economic Analysis has been conducted for the Kelly Hot Spring Agricultural Center in Modoc County, California. The core activity is a 1360 breeding sow, swine raising complex that utilizes direct heat energy from the Kelly Hot Spring geothermal resource. The swine is to be a totally confined operation for producing premium pork in controlled-environment facilities. The complex contains a feed mill, swine raising buildings and a complete waste management facility that produces methane gas to be delivered to a utility company for the production of electricity. The complex produces 6.7 million pounds of live pork (29,353 animals) shipped to slaughter per year; 105,000 cu. ft. of scrubbed methane per day; and fertilizer. Total effluent is less than 200 gpm of agricultural quality-water with full odor control. The methane production rate made possible with geothermal direct heat is equivalent to at least 400 kw continuous. Sale of the methane on a co-generation basis is being discussed with the utility company. The use of geothermal direct heat energy in the complex displaces nearly 350,000 gallons of fuel oil per year. Generation of the biogas displaces an additional 300,000 gallons of fuel oil per year.

  20. Kinetics experiments and bench-scale system: Background, design, and preliminary experiments

    Energy Technology Data Exchange (ETDEWEB)

    Rofer, C.K.

    1987-10-01

    The project, Supercritical Water Oxidation of Hazardous Chemical Waste, is a Hazardous Waste Remedial Actions Program (HAZWRAP) Research and Development task being carried out by the Los Alamos National Laboratory. Its objective is to obtain information for use in understanding the basic technology and for scaling up and applying oxidation in supercritical water as a viable process for treating a variety of DOE-DP waste streams. This report gives the background and rationale for kinetics experiments on oxidation in supercritical water being carried out as a part of this HAZWRAP Research and Development task. It discusses supercritical fluid properties and their relevance to applying this process to the destruction of hazardous wastes. An overview is given of the small emerging industry based on applications of supercritical water oxidation. Factors that could lead to additional applications are listed. Modeling studies are described as a basis for the experimental design. The report describes plug flow reactor and batch reactor systems, and presents preliminary results. 28 refs., 4 figs., 5 tabs.