WorldWideScience

Sample records for preliminary control technology

  1. Preliminary Cost Estimates of Pollution Control Technologies for Geothermal Developments

    Energy Technology Data Exchange (ETDEWEB)

    Sung, R.; Houser, G.; Richard, G.; Cotter, J.; Weller, P.; Pulaski, E.

    1979-10-01

    This is the first report from the EPA estimating the cost of technology for mitigating pollution that might arise from geothermal power systems. The Environmental Protection Agency (EPA) has taken an initial step towards the establishment of regulatory standards for the geothermal industry by preparing a document entitled Pollution Control Guidance for Geothermal Energy Development. This report supports that document by providing pollution control cost information. The objective of this report is to provide preliminary cost estimates for air and water pollution treatment and disposal technologies applicable for geothermal energy conversion systems. Cost estimates include both annualized capital investment and operation and maintenance (O&M) costs for various levels of environmental requirements. [DJE-2005

  2. Technology User Groups and Early Childhood Education: A Preliminary Study

    Science.gov (United States)

    Parette, Howard P.; Hourcade, Jack J.; Blum, Craig; Watts, Emily H.; Stoner, Julia B.; Wojcik, Brian W.; Chrismore, Shannon B.

    2013-01-01

    This article presents a preliminary examination of the potential of Technology User Groups as a professional development venue for early childhood education professionals in developing operational and functional competence in using hardware and software components of a Technology toolkit. Technology user groups are composed of varying numbers of…

  3. Technologies for Legionella Control

    Science.gov (United States)

    Presentation includes a review of new Office of Water document entitled "Technologies for Legionella Control in Premise Plumbing Systems", and discussion on ORD research projects involving Legionella and disinfection.

  4. Evaluation of Smart Gun Technologies preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-01-01

    The Smart Gun Technology Project has a goal to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing {open_quote}smart{close_quote} technologies. Smart technologies are those that can in some manner identify an officer. This report will identify, describe, and grade various technologies as compared to the requirements that were obtained from officers. This report does not make a final recommendation for a smart gun technology, nor does it give the complete design of a smart gun system.

  5. Preliminary evaluation of the "Dengue-MI" technology for Aedes aegyptimonitoring and control Avaliação preliminar da tecnologia "MI-Dengue" para o monitoramento e controle do Aedes aegypti

    Directory of Open Access Journals (Sweden)

    Álvaro Eduardo Eiras

    2009-01-01

    Full Text Available Limitations in the laboratory identification of Aedes aegypti and processing of field data based on larval surveys led to the development of the "Intelligent Dengue Monitoring" technology (MI-Dengue. MI-Dengue consists of a trap that captures gravid female Ae. aegypti, coupled with a computerized system for field data collection, transmission, and access to georeferenced maps in real time. The current study describe the first experience with a system for monitoring adult Ae. aegypti and presents the preliminary results in three municipalities that adopted MI-Dengue as a strategy to identify key areas and orient control measures. Weekly georeferenced maps and an entomological indicator (Mean Female Aedes Index provided information on infested areas and infestation levels, color-coded according to the number of captured female Ae. aegypti, and indicated risk-free, dengue alert, and critical situations that triggered appropriate control measures. The preliminary results suggest that the adoption of this control strategy with house-to-house visits in a 200m radius of the positive trap helped reduce dengue in the municipalities that adopted the system.As limitações na identificação do Aedes aegypti em laboratório e no processamento das informações obtidas em campo pelo método da pesquisa larvária levaram ao desenvolvimento do "Monitoramento Inteligente da Dengue" (MI-Dengue. O MI-Dengue consiste em uma armadilha que captura fêmeas grávidas de Ae. aegypti associada ao sistema informatizado de coleta, transmissão e acesso das informações de campo, e mapas georreferenciados em tempo real. O objetivo deste trabalho foi descrever pela primeira vez um sistema de monitoramento de adultos de Ae. aegypti e apresentar os resultados preliminares em três municípios que adotaram o MI-Dengue como estratégia para identificar áreas e direcionar as ações de controle. Semanalmente, mapas georreferenciados e o indicador entomológico (IMFA

  6. Smart gun technology requirements preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.; Brandt, D.J.; Tweet, K.D.

    1995-05-01

    Goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing user-recognizing-and-authorizing surety technologies. This project is funded by the National Institute of Justice. This document reports the projects first objective: to find and document the requirements for a user-recognizing-and-authorizing firearm technology that law enforcement officers will value. This report details the problem of firearm takeaways in law enforcement, the methodology used to develop the law enforcement officers` requirements, and the requirements themselves.

  7. Preliminary analysis of patent trends for magnetic fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, L.O.; Ashton, W.B.; Campbell, R.S.

    1984-02-01

    This study presents a preliminary analysis of development trends in magnetic fusion technology based on data from US patents. The research is limited to identification and description of general patent activity and ownership characteristics for 373 patents. The results suggest that more detailed studies of fusion patents could provide useful R and D planning information.

  8. 75 FR 11153 - Hydro Energy Technologies, LLC; Notice of Preliminary Permit Application Accepted for Filing and...

    Science.gov (United States)

    2010-03-10

    ... Energy Regulatory Commission Hydro Energy Technologies, LLC; Notice of Preliminary Permit Application.... On November 6, 2009, Hydro Energy Technologies, LLC (Hydro Energy Technologies) filed an application...-hours. Hydro Energy Technologies: Anthony J. Marra Jr., President, Hydro Energy Technologies, LLC.,...

  9. The preliminary research for biosynthetic engineering by radiation fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Roh, Chang Hyun; Jung, U Hee; Park, Hae Ran [KAERI, Daejeon (Korea, Republic of)

    2012-01-15

    The purpose of this project is to elucidate the solution to the production of bioactive substance using biotransformation process from core technology of biosynthetic engineering by radiation fusion technology. And, this strategy will provide core technology for development of drugs as new concept and category. Research scopes and contents of project include 1) The development of mutant for biosynthetic engineering by radiation fusion technology 2) The development of host for biosynthetic engineering by radiation fusion technology 3) The preliminary study for biosynthetic engineering of isoflavone by radiation fusion technology. The results are as follows. Isoflavone compounds(daidzein, hydroxylated isoflavone) were analyzed by GC-MS. The study of radiation doses and p-NCA high-throughput screening for mutant development were elucidated. And, it was carried out the study of radiation doses for host development. Furthermore, the study of redox partner and construction of recombinant strain for region-specific hydroxylation(P450, redox partner). In addition, the biological effect of 6,7,4'-trihydroxyisoflavone as an anti-obesity agent was elucidated in this study.

  10. Supervisory control of remote manipulation: A preliminary evaluation

    Science.gov (United States)

    Starr, G. P.

    1981-01-01

    A system for supervisory control is described, and preliminary results are presented. Supervisory control, where control is traded between man and computer, offers benefits in the control of a remote manipulator. The system has the potential to accomplish sophisticated tasks. It is indicated that supervisory control yields lower task completion times and is preferred over manual control.

  11. Greenridge Multi-Pollutant Control Project Preliminary Public Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Connell, Daniel P

    2009-01-12

    the commercial readiness of an emissions control system that is specifically designed to meet the environmental compliance requirements of these smaller coal-fired EGUs. The multi-pollutant control system is being installed and tested on the AES Greenidge Unit 4 (Boiler 6) by a team including CONSOL Energy Inc. as prime contractor, AES Greenidge LLC as host site owner, and Babcock Power Environmental Inc. as engineering, procurement, and construction contractor. All funding for the project is being provided by the U.S. Department of Energy, through its National Energy Technology Laboratory, and by AES Greenidge. AES Greenidge Unit 4 is a 107 MW{sub e} (net), 1950s vintage, tangentially-fired, reheat unit that is representative of many of the 440 smaller coal-fired units identified above. Following design and construction, the multi-pollutant control system will be demonstrated over an approximately 20-month period while the unit fires 2-4% sulfur eastern U.S. bituminous coal and co-fires up to 10% biomass. This Preliminary Public Design Report is the first in a series of two reports describing the design of the multi-pollutant control facility that is being demonstrated at AES Greenidge. Its purpose is to consolidate for public use all available nonproprietary design information on the Greenidge Multi-Pollutant Control Project. As such, the report includes a discussion of the process concept, design objectives, design considerations, and uncertainties associated with the multi-pollutant control system and also summarizes the design of major process components and balance of plant considerations for the AES Greenidge Unit 4 installation. The Final Public Design Report, the second report in the series, will update this Preliminary Public Design Report to reflect the final, as-built design of the facility and to incorporate data on capital costs and projected operating costs.

  12. Insensitive control technology development

    Science.gov (United States)

    Harvey, C. A.; Pope, R. E.

    1978-01-01

    THe investigation of two insensitive controller synthesis techniques was reported. The finite dimensional inverse approach produces a time varying insensitive controller and/or parameter identifier by constructing inverse functions derived from a finite number of input output pair relationships. The MD/IM concept relies on the information matrix theory that was developed in the estimation and identification field. The MD/IM synthesis technique is based on the hypothesis that minimizing the information matrix will reduce system identifiability and consequently system sensitivity to uncertain parameters. The controllers designed with both techniques were evaluated on a realistic C-5A aircraft flight control problem. Results indicate that the FDI controller is more suited to trajectory type problems because of its time varying nature. The MD/IM controller performed as well as the top-rated controllers of the initial effort and has direct application to aircraft flight control problems.

  13. Mechatronics control technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-15

    This book consists six chapters, which are an assembler grammar and practical use on Z801 8041/8048 and kind of assemblers and how to use, control of a microprocessor and mechatro with application of 8255, interface circuit and direction of DA converter, control of stepping motor such as introduction of it, sequence switch, drive program of stepping motor, control for DC motor such as normal rotation and abnormal rotation operation of DC motor by personal computer, control AC motor like PWM inverter and data communication among systems such as RS-232C and INTEL-HEXA format program.

  14. Emerging Engine Control Technologies

    DEFF Research Database (Denmark)

    Hendricks, Elbert; Chevalier, Alain

    1996-01-01

    In earlier work published by the author and co-authors, a dynamic model called a Mean Value Engine Model (MVEM) was developed. This model is physically based and is intended mainly for control applications. It is especially well suited to embedded model applications in engine controllers, susch...

  15. Site Specific Weed Control Technologies

    DEFF Research Database (Denmark)

    Christensen, Svend; Søgaard, Henning Tangen; Kudsk, Per;

    2009-01-01

    describe the basic parts of site specific weed control technologies, comprising of weed sensing systems, weed management models and precision weed control implements. A review of state-of-the-art technologies shows that several weed sensing systems and precision implements have been developed over the last...... of knowledge about the economic and environmental potential for increasing the resolution of weed control. The integration of site-specific information on weed distribution, weed species composition and density, and the effect on crop yield, is decisive for successful site-specific weed management.   Keywords......Site-specific weed control technologies are defined as machinery or equipment embedded with technologies that detect weeds growing in a crop and, taking into account predefined factors such as economics, takes action to maximise the chances of successfully controlling them. In the article, we...

  16. Using Technology to Control Costs

    Science.gov (United States)

    Ho, Simon; Schoenberg, Doug; Richards, Dan; Morath, Michael

    2009-01-01

    In this article, the authors examines the use of technology to control costs in the child care industry. One of these technology solutions is Software-as-a-Service (SaaS). SaaS solutions can help child care providers save money in many aspects of center management. In addition to cost savings, SaaS solutions are also particularly appealing to…

  17. Flow Control Technology

    Science.gov (United States)

    2010-07-01

    downstream of the propeller system. Figure 16 and Figure 17 show the ADV used by Huxley and Hartman [5] as well as a flow diagram for their...Max 17° Figure 23: Power Coefficient of Asymmetric Test Trials vs. Sinusoid pitch schedule. The aim of the work by Huxley and Hartman [5] was...Fagley, Ph.D. candidate, worked with Cadets Thiago Huxley and Christopher Hartman on a feedback controlled cycloidal wave energy converter in

  18. Preliminary results of direct cell-matrix assembly technology

    Institute of Scientific and Technical Information of China (English)

    LIU Haixia; YAN Yongnian; XIONG Zhuo; CHENG Jie; WANG Xiaohong; LIN Feng; WANG Changyong

    2005-01-01

    @@ Tissue loss and end-stage organ failure has been an emergent problem for humanity[1]. Solving this problem at the most basic level is currently an area of great interest to many researchers. At the end of the 20th century, tissue engineering technology began using formed scaffolds to indirectly control the assembly of cells. This technology has resulted in a new way to artificially fabricate tissues. But the method has been limited to simple tissue types, such as bone, skin, muscle and tendon[2―5]. The fabrication of complex organs by this technology is still not possible. A possible alternative is assembling cells directly into a viable and predefined structure[6―9].

  19. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  20. Metabolic Control with Insulin Pump Therapy: Preliminary Experience

    Directory of Open Access Journals (Sweden)

    Shang-Ren Hsu

    2008-07-01

    Conclusion: Our preliminary experience demonstrated the effectiveness of insulin pump therapy for both type 1 and type 2 diabetic patients. The reduction in their HbA1C values was both statistically and clinically significant. This treatment should be considered for patients poorly controlled by subcutaneous insulin injection therapy.

  1. Corrosion control in mining technology

    Energy Technology Data Exchange (ETDEWEB)

    Telekesi, J.

    1985-01-01

    An overview of corrosion effects in mining technology and the importance of protection is presented. The most common corrosion processes and effects are summarized and the system and criteria of their avoidance are discussed in detail. Preventive measures are recommended to decrease possible corrosion effects including the selection of corrosion-resistive constructions, to use protective coatings and inhibition techniques and some other protection possibilities where applicable. The organization aspects and the economic impact of corrosion control in mining are discussed.

  2. Technology for sodium purity control

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Ji Young; Kim, B. H.; Kim, T. J. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    When sodium is used as heat transfer fluid, the plugging in coolant flow, the corrosion of structure material and the transfer of radioactive material caused by the impurities in sodium are worth considerable. Accordingly, these impurities must be monitored and controlled continuously by sodium purification devices in the heat transfer system which sodium is used as coolant. Sodium purification loop was constructed for the purpose of accumulating the technology for purity control of the coolant, developing and verifying further efficient instruments for sodium purification. The plugging meter and the cold trap is used as the implement for measuring and controlling the oxygen and the hydrogen, the main impurities in sodium coolant. They are capable of excellent performance as the implements which could detect and monitor the impurities to the concentration limit required for nuclear reactor. Sodium purification loop could be used variably according to the experimental purpose. 18 refs., 34 figs., 8 tabs. (Author)

  3. SKA CSP controls: technological challenges

    Science.gov (United States)

    Baffa, C.; Giani, E.; Vrcic, S.; Vela Nuñez, M.

    2016-07-01

    The Square Kilometer Array (SKA) project is an international effort to build the world's largest radio telescope, with eventually over a square kilometer of collecting area. For SKA Phase 1, Australia will host the low-frequency instrument with more than 500 stations, each containing around 250 individual antennas, whilst South Africa will host an array of close to 200 dishes. The scale of the SKA represents a huge leap forward in both engineering and research and development towards building and delivering a unique instrument, with the detailed design and preparation now well under way. As one of the largest scientific endeavors in history, the SKA will brings together close to 100 organizations from 20 countries. Every aspect of the design and development of such a large and complex instrument requires state-of-the-art technology and innovative approach. This poster (or paper) addresses some aspects of the SKA monitor and control system, and in particular describes the development and test results of the CSP Local Monitoring and Control prototype. At the SKA workshop held in April 2015, the SKA monitor and control community has chosen TANGO Control System as a framework, for the implementation of the SKA monitor and control. This decision will have a large impact on Monitor an Control development of SKA. As work is on the way to incorporate TANGO Control System in SKA is in progress, we started to development a prototype for the SKA Central Signal Processor to mitigate the associated risks. In particular we now have developed a uniform class schema proposal for the sub-Element systems of the SKA-CSP.

  4. A preliminary study of current multimedia information technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.C.

    1997-03-01

    This paper surveys more than 70 articles published in the IEEE Multimedia journal and other journals. The survey summarizes aspects of multimedia information technology and categorizes application areas of multimedia information technology and interesting research areas related to it.

  5. An Affect Control Theory of Technology

    Science.gov (United States)

    Shank, Daniel B.

    2010-01-01

    Affect control theory is a theory of interaction that takes into account cultural meanings. Affect control research has previously considered interaction with technology, but there remains a lack of theorizing about inclusion of technology within the theory. This paper lays a foundation for an affect control theory of technology by addressing key…

  6. Preliminary design of the Space Station internal thermal control system

    Science.gov (United States)

    Herrin, Mark T.; Patterson, David W.; Turner, Larry D.

    1987-01-01

    The baseline preliminary design configuration of the Internal Thermal Control system (ITCS) of the U.S. Space Station pressurized elements (i.e., the Habitation and U.S. Laboratory modules, pressurized logistics carrier, and resources nodes) is defined. The ITCS is composed of both active and passive components. The subsystems which comprise the ITCS are identified and their functional descriptions are provided. The significant trades and analyses, which were performed during Phase B (i.e., the preliminary design phase) that resulted in the design described herein, are discussed. The ITCS interfaces with the station's central Heat Rejection and Transport System (HRTS), other systems, and externally attached pressurized payloads are described. Requirements on the ITCS with regard to redundancy and experiment support are also addressed.

  7. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    Yi DAI; Zhao-jun WANG; Chang-liang ZOU

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method.Sullivan and woodall pointed out the test statistic lrt (n1, n2) is approximately distributed as x2 (2) as the sample size n, n1 and n2 are very large, and the value of n1 = 2, 3,..., n- 2 and that of n2 = n- n1.So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained.In addition, the properties of the standardized likelihood ratio statistic slr(n1,n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i ≠ n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both.Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  8. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method. Sullivan and woodall pointed out the test statistic lrt(n1, n2) is approximately distributed as x2(2) as the sample size n,n1 and n2 are very large, and the value of n1 = 2,3,..., n - 2 and that of n2 = n - n1. So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained. In addition, the properties of the standardized likelihood ratio statistic slr(n1, n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i≠n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both. Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  9. Preliminary Findings from an Analysis of Building Energy Information System Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish; Price, Philip

    2009-06-01

    Energy information systems comprise software, data acquisition hardware, and communication systems that are intended to provide energy information to building energy and facilities managers, financial managers, and utilities. This technology has been commercially available for over a decade, however recent advances in Internet and other information technology, and analytical features have expanded the number of product options that are available. For example, features such as green house gas tracking, configurable energy analyses and enhanced interoperability are becoming increasingly common. Energy information systems are used in a variety of commercial buildings operations and environments, and can be characterized in a number of ways. Basic elements of these systems include web-based energy monitoring, web-based energy management linked to controls, demand response, and enterprise energy management applications. However the sheer number and variety of available systems complicate the selection of products to match the needs of a given user. In response, a framework was developed to define the capabilities of different types of energy information systems, and was applied to characterize approximately 30 technologies. Measurement is a critical component in managing energy consumption and energy information must be shared at all organizational levels to maintain persistent, efficient operations. Energy information systems are important to understand because they offer the analytical support to process measured data into information, and they provide the informational link between the primary actors who impact building energy efficiency - operators, facilities and energy managers, owners and corporate decision makers. In this paper, preliminary findings are presented, with a focus on overall trends and the general state of the technology. Key conclusions include the need to further pursue standardization and usability, x-y plotting as an under-supported feature, and

  10. Recent Technology Advances in Distributed Engine Control

    Science.gov (United States)

    Culley, Dennis

    2017-01-01

    This presentation provides an overview of the work performed at NASA Glenn Research Center in distributed engine control technology. This is control system hardware technology that overcomes engine system constraints by modularizing control hardware and integrating the components over communication networks.

  11. Instrumented Prodder : Preliminary Results of the Technology Demonstrator Evaluation

    NARCIS (Netherlands)

    Schoolderman, A.J.; Dijk, S.G.M. van; Deurloo, D.; Russel, K.

    2003-01-01

    A prodder for mine detection has been enhanced with sensors and electronics in order to provide the operator with information on the force exerted during the prodding operation and on the type of material that is in contact with the tip of the prodder. The performance of a technology demonstrator ve

  12. Technologies Use with ESL Learners in New York State: Preliminary Report.

    Science.gov (United States)

    Meskill, Carla; Mossop, Jonathan

    2000-01-01

    Presents preliminary research concerning learners whose native language is not English and who attend public school in New York State. Research focused on how English as a Second Language (ESL) teachers in the state view and use technologies to help develop their students' literacy skills. Discusses data from a statewide survey and from initial…

  13. Preliminary technology utilization assessment of the robotic fruit harvester

    Science.gov (United States)

    Wilhelm, J.

    1982-01-01

    The results of an analysis whose purpose was to examine the history and progress of mechanical fruit harvesting, to determine the significance of a robotic fruit tree harvester and to assess the available market for such a product are summarized. Background information that can be used in determining the benefit of a proof of principle demonstration is provided. Such a demonstration could be a major step toward the transfer of this NASA technology.

  14. Advanced technologies for Mission Control Centers

    Science.gov (United States)

    Dalton, John T.; Hughes, Peter M.

    1991-01-01

    Advance technologies for Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: technology needs; current technology efforts at GSFC (human-machine interface development, object oriented software development, expert systems, knowledge-based software engineering environments, and high performance VLSI telemetry systems); and test beds.

  15. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-01-18

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program (The Program). The analysis is a task by Princeton Energy Resources International, LLC, in support of the National Renewable Energy Laboratory on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE).

  16. Voltage-Controlled Sapphire Oscillator: Design, Development, and Preliminary Performance

    Science.gov (United States)

    Wang, R. T.; Dick, G. J.; Tjoelker, R. L.

    2007-08-01

    We present the design for a new short-term frequency standard, the voltage-controlled sapphire oscillator, as a practical and lower-cost alternative to a cryogenic sapphire oscillator operating at liquid helium temperatures. Performance goals are a frequency stability of 1 x 10^-14 (1 second equal to or less than tau equal to or less than 100 seconds), more than 2 years of continuous operation, and practical operability. Key elements include the sapphire resonator, low-power and long-life cryocooler, frequency compensation method, and cryo-Pound design. We report the design verification, experimental results, and test results of the cryocooler environmental sensitivity, as well as a preliminary stability measurement.

  17. Preliminary Technical Risk Analysis for the Geothermal Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    McVeigh, J.; Cohen, J.; Vorum, M.; Porro, G.; Nix, G.

    2007-03-01

    This report explains the goals, methods, and results of a probabilistic analysis of technical risk for a portfolio of R&D projects in the DOE Geothermal Technologies Program ('the Program'). The analysis is a task by Princeton Energy Resources International, LLC (PERI), in support of the National Renewable Energy Laboratory (NREL) on behalf of the Program. The main challenge in the analysis lies in translating R&D results to a quantitative reflection of technical risk for a key Program metric: levelized cost of energy (LCOE). This requires both computational development (i.e., creating a spreadsheet-based analysis tool) and a synthesis of judgments by a panel of researchers and experts of the expected results of the Program's R&D.

  18. [Diesel emission control technologies: a review].

    Science.gov (United States)

    He, Hong; Weng, Duan; Zi, Xin-Yun

    2007-06-01

    The authors reviewed the researches on diesel emission control for both new engine technologies and aftertreatment technologies. Emphases were focused on the recent advancements of the diesel particulate filter (DPF) and the selective catalytic reduction (SCR) of NO(x). In addition, it was explored for the future development in this field.

  19. Site-specific weed control technologies

    DEFF Research Database (Denmark)

    Christensen, S; Søgaard, H T; Kudsk, P

    2009-01-01

    Site-specific weed control technologies are defined as machinery or equipment embedded with technologies that detect weeds growing in a crop and, taking into account predefined factors such as economics, takes action to maximise the chances of successfully controlling them. In the article, we...... describe the basic parts of site specific weed control technologies, comprising of weed sensing systems, weed management models and precision weed control implements. A review of state-of-the-art technologies shows that several weed sensing systems and precision implements have been developed over the last...... two decades, though barriers prevent their breakthrough. Most important among these is the lack of a truly robust weed recognition method, owing to mutual shading among plants and limitations in the capacity of highly accurate spraying and weeding apparatuses.   Another barrier is the lack...

  20. TECHNOLOGICAL OPTIONS FOR ACID RAIN CONTROL

    Science.gov (United States)

    Discussed are acid rain control options available to the electric utility industry. They include coal switching, flue gas desulfurization, and such emerging lower cost technologies as Limestone Injection Multistage Burners (LIMB) and Advanced Silicate (ADVACATE), both developed ...

  1. TECHNOLOGICAL OPTIONS FOR ACID RAIN CONTROL

    Science.gov (United States)

    Discussed are acid rain control options available to the electric utility industry. They include coal switching, flue gas desulfurization, and such emerging lower cost technologies as Limestone Injection Multistage Burners (LIMB) and Advanced Silicate (ADVACATE), both developed ...

  2. Current submarine atmosphere control technology.

    Science.gov (United States)

    Mazurek, W

    1998-01-01

    Air purification in submarines was introduced towards the end of World War II and was limited to the use of soda lime for the removal of carbon dioxide and oxygen candles for the regeneration of oxygen. The next major advances came with the advent of nuclear-powered submarines. These included the development of regenerative and, sometimes, energy-intensive processes for comprehensive atmosphere revitalization. With the present development of conventional submarines using air-independent propulsion there is a requirement for air purification similar to that of the nuclear-powered submarines but it is constrained by limited power and space. Some progress has been made in the development of new technology and the adoption of air purification equipment used in the nuclear-powered submarines for this application.

  3. Electronic control/display interface technology

    Science.gov (United States)

    Parrish, R. V.; Busquets, A. M.; Murray, R. F.; Hatfield, J. J.

    1985-01-01

    An effort to produce a representative workstation for the Space Station Data Management Test Bed that provides man/machine interface design options for consolidating, automating, and integrating the space station work station, and hardware/software technology demonstrations of space station applications is discussed. The workstation will emphasize the technologies of advanced graphics engines, advanced display/control medias, image management techniques, multifunction controls, and video disk utilizations.

  4. Bio-Contamination Control for Spacesuit Garments - A Preliminary Study

    Science.gov (United States)

    Rhodes, Richard; Korona, Adam; Orndoff, Evelyn; Ott, Mark; Poritz, Darwin

    2010-01-01

    This paper outlines a preliminary study to review, test, and improve upon the current state of spacesuit bio-contamination control. The study includes an evaluation of current and advanced suit materials, ground and on-orbit cleaning methods, and microbial test and analysis methods. The first aspect of this study was to identify potential anti-microbial textiles and cleaning agents, and to review current microbial test methods. The anti-microbial cleaning agent and textile market survey included a review of current commercial-off-the-shelf (COTS) products that could potentially be used as future space flight hardware. This review included replacements for any of the softgood layers that may become contaminated during an extravehicular activity (EVA), including the pressure bladder, liquid cooling garment, and ancillary comfort undergarment. After a series of COTS anti-microbial textiles and clean ing agents were identified, a series of four tests were conducted: (1) a stacked configuration test that was conducted in order to review how bio-contamination would propagate through the various suit layers, (2) a individual materials test that evaluated how well each softgood layer either promoted or repressed growth, (3) a cleaning agent test that evaluated the efficacy on each of the baseline bladders, and (4) an evaluation of various COTS anti-microbial textiles. All antimicrobial COTS materials tested appeared to control bacteria colony forming unit (CFU) growth better than the Thermal Comfort Undergarment (TCU) and ACES Liquid Cooling Garment (LCG)/EMU Liquid Cooling Ventilation Garment (LCVG) materials currently in use. However, a comparison of fungi CFU growth in COTS to current suit materials appeared to vary per material. All cleaning agents tested in this study appeared to inhibit the level of bacteria and fungi growth to acceptable levels for short duration tests. While several trends can be obtained from the current analysis, a series of test improvements are

  5. Application of NASA-developed technology to the automatic control of municipal sewage treatment plants

    Science.gov (United States)

    Hiser, L. L.; Herrera, W. R.

    1973-01-01

    A search was made of NASA developed technology and commercial technology for process control sensors and instrumentation which would be applicable to the operation of municipal sewage treatment plants. Several notable items were found from which process control concepts were formulated that incorporated these items into systems to automatically operate municipal sewage treatment plants. A preliminary design of the most promising concept was developed into a process control scheme for an activated sludge treatment plant. This design included process control mechanisms for maintaining constant food to sludge mass (F/M) ratio, and for such unit processes as primary sedimentation, sludge wastage, and underflow control from the final clarifier.

  6. Physical activity and situational interest in mobile technology integrated physical education: A preliminary study

    Directory of Open Access Journals (Sweden)

    Xihe Zhu

    2016-06-01

    Full Text Available Background: Mobile technology permeates every aspect of student lives. The question is whether mobile technology integration can produce desirable effects in the gymnasium. Objective: This preliminary study aimed to investigate the effects of mobile technology integration on student situational interest and physical activity fluctuation in physical education lessons.Methods: Sixth grade students (N = 53 were randomly placed into either an experiment group by class that utilized mobile technology-integrated resources (iPad and applications, or a comparison group that did not utilize technology. Both groups received five identical physical education lessons. Student physical activity was tracked with accelerometers, and they completed the Situational Interest Scale at the end of each lesson. The researchers analyzed the data using descriptive statistics, correlation analysis and multivariate analysis of variance (MANOVA with repeated measures. Results: Students in the experiment group reported significantly lower physical activity and situational interest than their counterparts in the comparison group. A group × lesson interaction suggested that student step/min steadily increased throughout the lessons in the experiment group while remaining relative stable in the comparison group. Conclusions: Mobile technologies such as iPad and applications with no direct physical activity prompt had little effect on increasing physical activity or situational interest in the short term. It is important to consider the classroom dynamics to realistically evaluate the constraints and strengths that mobile technology-integrated physical education lessons may pose in a traditional physical education environment.

  7. Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

    Energy Technology Data Exchange (ETDEWEB)

    Moore, E.B.

    1984-10-01

    The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables.

  8. Preliminary control system design and analysis for the Space Station Furnace Facility thermal control system

    Science.gov (United States)

    Jackson, M. E.

    1995-01-01

    This report presents the Space Station Furnace Facility (SSFF) thermal control system (TCS) preliminary control system design and analysis. The SSFF provides the necessary core systems to operate various materials processing furnaces. The TCS is defined as one of the core systems, and its function is to collect excess heat from furnaces and to provide precise cold temperature control of components and of certain furnace zones. Physical interconnection of parallel thermal control subsystems through a common pump implies the description of the TCS by coupled nonlinear differential equations in pressure and flow. This report formulates the system equations and develops the controllers that cause the interconnected subsystems to satisfy flow rate tracking requirements. Extensive digital simulation results are presented to show the flow rate tracking performance.

  9. The nuclear materials control technology briefing book

    Energy Technology Data Exchange (ETDEWEB)

    Hartwell, J.K.; Fernandez, S.J.

    1992-03-01

    As national and international interests in nuclear arms control and non-proliferation of nuclear weapons, intensify, it becomes ever more important that contributors be aware of the technologies available for the measurement and control of the nuclear materials important to nuclear weapons development. This briefing book presents concise, nontechnical summaries of various special nuclear material (SNM) and tritium production monitoring technologies applicable to the control of nuclear materials and their production. Since the International Atomic Energy Agency (IAEA) operates a multinational, on-site-inspector-based safeguards program in support of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), many (but not all) of the technologies reported in this document are in routine use or under development for IAEA safeguards.

  10. The development of advanced instrumentation and control technology -The development of basic technology for instrumentation and control-

    Energy Technology Data Exchange (ETDEWEB)

    Ham, Chang Sik; Kwon, Kee Choon; Park, Jae Chang; Kim, Jung Taek; Jung, Chul Hwan; Lee, Dong Yung; Kim, Chang Hoi; Hwang, In Koo; Kim, Jung Soo; Nah, Nan Joo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    In this report automatic startup technology and dynamic alarm processing technology are developed. We designed an automatic control system had four modes and six break points. The four modes are heating mode I, heating mode II, heating mode III and critical mode. The six break points are RHR isolation and pressurizer bubble generation, P-6, critical conformation and another three break points for the start point of each mode from heating mode II to critical mode. We defined control variables and components at each mode and developed control algorithms. The conceptual design for automatic startup system configuration and interface with test facility was developed. These results will be used for detail design and software implementation in the project of next year. For development of dynamic alarm processing technology, necessary techniques were selected according to the survey on current development activities and the analysis on design documents. Alarm operating procedures were studied for obtaining casual relationships among alarms and part of a preliminary prototype was implemented in this first year using the results of the analysis including various techniques studied during the survey and analysis stage. 70 figs, 7 tabs, 77 refs. (Author).

  11. Loss of Control Prevention and Recovery: Onboard Guidance, Control, and Systems Technologies

    Science.gov (United States)

    Belcastro, Christine M.

    2012-01-01

    Loss of control (LOC) is one of the largest contributors to fatal aircraft accidents worldwide. LOC accidents are complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. These LOC hazards include vehicle impairment conditions, external disturbances; vehicle upset conditions, and inappropriate crew actions or responses. Hence, there is no single intervention strategy to prevent these accidents. NASA previously defined a comprehensive research and technology development approach for reducing LOC accidents and an associated integrated system concept. Onboard technologies for improved situation awareness, guidance, and control for LOC prevention and recovery are needed as part of this approach. Such systems should include: LOC hazards effects detection and mitigation; upset detection, prevention and recovery; and mitigation of combined hazards. NASA is conducting research in each of these areas. This paper provides an overview of this research, including the near-term LOC focus and associated analysis, as well as preliminary flight system architecture.

  12. Preliminary Results From NASA's Space Solar Power Exploratory Research and Technology Program

    Science.gov (United States)

    Howell, Joe T.; Mankins, John C.

    2000-01-01

    Large solar power satellite (SPS) systems that might provide base load power into terrestrial markets were examined extensively in the 1970s by the US Department of Energy (DOE) and the National Aeronautics and Space Administration (NASA). Following a hiatus of about 15 years, the subject of space solar power (SSP) was reexamined by NASA from 1995-1997 in the "fresh look" study, and during 1998 in an SSP "concept definition study". As a result of these efforts, during 1999-2000, NASA has been conducting the SSP Exploratory Research and Technology (SERT) program. The goal of the SERT activity has been to conduct preliminary strategic technology research and development to enable large, multi-megawatt SSP systems and wireless power transmission (WPT) for government missions and commercial markets (in-space and terrestrial). In pursuing that goal, the SERT: (1) refined and modeled systems approaches for the utilization of SSP concepts and technologies, ranging from the near-term (e.g., for space science, exploration and commercial space applications) to the far-term (e.g., SSP for terrestrial markets), including systems concepts, architectures, technology, infrastructure (e.g. transportation), and economics; (2) conducted technology research, development and demonstration activities to produce "proof-of-concept" validation of critical SSP elements for both nearer and farther-term applications; and (3) engendered the beginnings of partnerships (nationally and internationally) that could be expanded, as appropriate, to pursue later SSP technology and applications. Through these efforts, the SERT should allow better informed future decisions regarding further SSP and related technology research and development investments by both NASA and prospective partners, and guide further definition of technology roadmaps - including performance objectives, resources and schedules, as well as "multi-purpose" applications (e.g., commerce, science, and government). This paper

  13. Acceptability of robotic technology in neuro-rehabilitation: preliminary results on chronic stroke patients.

    Science.gov (United States)

    Mazzoleni, Stefano; Turchetti, Giuseppe; Palla, Ilaria; Posteraro, Federico; Dario, Paolo

    2014-09-01

    During the last decade, different robotic devices have been developed for motor rehabilitation of stroke survivors. These devices have been shown to improve motor impairment and contribute to the understanding of mechanisms underlying motor recovery after a stroke. The assessment of the robotic technology for rehabilitation assumes great importance. The aim of this study is to present preliminary results on the assessment of the acceptability of the robotic technology for rehabilitation on a group of thirty-four chronic stroke patients. The results from questionnaires on the patients' acceptability of two different robot-assisted rehabilitation scenarios show that the robotic approach was well accepted and tolerated by the patients. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  14. Assessment of control technology for stationary sources. Volume II: control technology data tables. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    This report, the Control Technology Data Tables, is the second volume of the three-volume final report for the contract. It presents in tabular format, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts and application status. Also included is a code list which classifies the stationary sources examined by industry, process, and emission source.

  15. Environmental control technology for biomass flash pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, J.B.L.; Doctor, R.D.; Seward, W.H.

    1980-01-01

    The rapid commercialization of biomass gasification and pyrolysis technologies will raise questions concerning the environmental impacts of these systems and the associated costs for appropriate control technologies. This study concentrates on characterizing the effluent emissions and control technologies for a dual fluid-bed pyrolysis unit run by Arizona State University, Tempe, Arizona. The ASU system produces a raw product gas that is passed through a catalytic liquefaction system to produce a fuel comparable to No. 2 fuel oil. Argonne National Laboratory is conducting a program that will survey several biomass systems to standardize the sampling techniques, prioritize standard analyses and develop a data base so that environmental issues later may be addressed before they limit or impede the commercialization of biomass gasification and pyrolysis technologies. Emissions will be related to both the current and anticipated emissions standards to generate material balances and set design parameters for effluent treatment systems. This will permit an estimate to be made of the capital and operating costs associated with these technologies.

  16. JPL Advanced Thermal Control Technology Roadmap - 2008

    Science.gov (United States)

    Birur, Gaj

    2008-01-01

    This slide presentation reviews the status of thermal control technology at JPL and NASA.It shows the active spacecraft that are in vairous positions in the solar syatem, and beyond the solar system and the future missions that are under development. It then describes the challenges that the past missions posed with the thermal control systems. The various solutions that were implemented duirng the decades prior to 1990 are outlined. A review of hte thermal challenges of the future misions is also included. The exploration plan for Mars is then reviewed. The thermal challenges of the Mars Rovers are then outlined. Also the challenges of systems that would be able to be used in to explore Venus, and Titan are described. The future space telescope missions will also need thermal control technological advances. Included is a review of the thermal requirements for manned missions to the Moon. Both Active and passive technologies that have been used and will be used are reviewed. Those that are described are Mechanically Pumped Fluid Loops (MPFL), Loop Heat Pipes, an M3 Passive Cooler, Heat Siwtch for Space and Mars surface applications, phase change material (PCM) technology, a Gas Gap Actuateor using ZrNiH(x), the Planck Sorption Cooler (PCS), vapor compression -- Hybrid two phase loops, advanced pumps for two phase cooling loops, and heat pumps that are lightweight and energy efficient.

  17. Clean Energy Technologies: A Preliminary Inventory of the Potential for Electricity Generation

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Owen; Worrell, Ernst

    2005-08-03

    be unused and convert it to electricity or useful thermal energy. Recycled energy produces no or little increase in fossil fuel consumption and pollutant emissions. Examples of energy recycling methods include industrial gasification technologies to increase energy recovery, as well as less traditional CHP technologies, and the use of energy that is typically discarded from pressure release vents or from the burning and flaring of waste streams. These energy recovery technologies have the ability to reduce costs for power generation. This report is a preliminary study of the potential contribution of this ''new'' generation of clean recycled energy supply technologies to the power supply of the United States. For each of the technologies this report provides a short technical description, as well as an estimate of the potential for application in the U.S., estimated investment and operation costs, as well as impact on air pollutant emission reductions. The report summarizes the potential magnitude of the benefits of these new technologies. The report does not yet provide a robust cost-benefit analysis. It is stressed that the report provides a preliminary assessment to help focus future efforts by the federal government to further investigate the opportunities offered by new clean power generation technologies, as well as initiate policies to support further development and uptake of clean power generation technologies.

  18. Robotics-Control Technology. Technology Learning Activity. Teacher Edition. Technology Education Series.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains the materials required for presenting an 8-day competency-based technology learning activity (TLA) designed to introduce students in grades 6-10 to advances and career opportunities in the field of robotics-control technology. The guide uses hands-on exploratory experiences into which activities to help students develop…

  19. Protection and Control with FPGA technology

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, K. Y.; Yi, W. J. [Korea Reliability Technology and System, Daejeon (Korea, Republic of); Koo, I. S. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-03-15

    To cope with the experiences such as unsatisfied response time of control and protection system, components obsolescence of those systems, and outstanding coercion of system modernization, nuclear society is striving to resolve this issue fundamentally. The reports and standards issued from IAEA and other standard organization like IBC is interested in the FPGA technology, which is fairly mature technology in other fields of industry. Intuitively it is replacing the high level of micro-processor type equipped with various software and hardware, which causes to accelerate the aging and obsolescence, and demands for system modernization in I and C system in Nuclear Power Plant. Thus utility has to spend much time and effort to upgrade I and C system throughout a decease. This paper summarizes the need of FPGA technology in Nuclear Power Plant, describing the characteristics of FPGA, test methodology and design requirements. Also the specific design and implementation experiences brought up in the course of FPGA-based controller, which has been conducted in KoRTS. The certification and verification and validation process to ensure the integrity of FPGA-based controller will be addressed. After that, Diverse Protection System (DPS) for YGN Unit 3 and 4 that is implemented via VHDL through SDLC is loaded on FPGA-based controller for run-time experimentations such as functionality, performance, integrity and reliability. Some of the test data is addressed in this paper.

  20. Preliminary Technology Maturation Plan for Immobilization of High-Level Waste in Glass Ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Vienna, John D.; Crum, Jarrod V.; Sevigny, Gary J.; Smith, G L.

    2012-09-30

    A technology maturation plan (TMP) was developed for immobilization of high-level waste (HLW) raffinate in a glass ceramics waste form using a cold-crucible induction melter (CCIM). The TMP was prepared by the following process: 1) define the reference process and boundaries of the technology being matured, 2) evaluate the technology elements and identify the critical technology elements (CTE), 3) identify the technology readiness level (TRL) of each of the CTE’s using the DOE G 413.3-4, 4) describe the development and demonstration activities required to advance the TRLs to 4 and 6 in order, and 5) prepare a preliminary plan to conduct the development and demonstration. Results of the technology readiness assessment identified five CTE’s and found relatively low TRL’s for each of them: • Mixing, sampling, and analysis of waste slurry and melter feed: TRL-1 • Feeding, melting, and pouring: TRL-1 • Glass ceramic formulation: TRL-1 • Canister cooling and crystallization: TRL-1 • Canister decontamination: TRL-4 Although the TRL’s are low for most of these CTE’s (TRL-1), the effort required to advance them to higher values. The activities required to advance the TRL’s are listed below: • Complete this TMP • Perform a preliminary engineering study • Characterize, estimate, and simulate waste to be treated • Laboratory scale glass ceramic testing • Melter and off-gas testing with simulants • Test the mixing, sampling, and analyses • Canister testing • Decontamination system testing • Issue a requirements document • Issue a risk management document • Complete preliminary design • Integrated pilot testing • Issue a waste compliance plan A preliminary schedule and budget were developed to complete these activities as summarized in the following table (assuming 2012 dollars). TRL Budget Year MSA FMP GCF CCC CD Overall $M 2012 1 1 1 1 4 1 0.3 2013 2 2 1 1 4 1 1.3 2014 2 3 1 1 4 1 1.8 2015 2 3 2 2 4 2 2.6 2016 2 3 2 2 4 2 4

  1. Outcome measures to evaluate new technology for tonsillectomy: preliminary experience with Coblation

    Science.gov (United States)

    Shah, Udayan K.; Puchalski, Robert; Briggs, Marianne; Chiavacci, Rosetta; Galinkin, Jeffrey

    2001-05-01

    Evaluating the benefits of new surgical technologies does not end with the observation of successful instrument-to- tissue interaction. The impact of new technologies in medicine today is also gauged by improvements in patients' daily activities and performance. We present our outcomes assessment tool for judging the value of applying a novel tonsillectomy technique, plasma- mediated ablation using Coblation technology. Plasma- mediated ablation (PMA) achieves soft tissue resection in the oropharynx by energizing protons to break bonds. Less heat is released, allowing for less thermal injury, and possibly less pain, than with tonsillectomy performed using electrocautery alone. Children undergoing tonsillectomy by PMA, were evaluated using our outcomes-based scale, which asked families to report the degree of interruption of normal activities for the patient and their family during the post-tonsillectomy recovery period. A preliminary review of several outcomes assessments exemplify the benefits and limitations of this tool. The tracking of valuable data is weighed against the limitations of a short time course relative to the duration of disability, and a poor response rate. Future work aims to improve this data collection tool to allow application to other new technologies in otolaryngology.

  2. The research of laser marking control technology

    Science.gov (United States)

    Zhang, Qiue; Zhang, Rong

    2009-08-01

    In the area of Laser marking, the general control method is insert control card to computer's mother board, it can not support hot swap, it is difficult to assemble or it. Moreover, the one marking system must to equip one computer. In the system marking, the computer can not to do the other things except to transmit marking digital information. Otherwise it can affect marking precision. Based on traditional control methods existed some problems, introduced marking graphic editing and digital processing by the computer finish, high-speed digital signal processor (DSP) control marking the whole process. The laser marking controller is mainly contain DSP2812, digital memorizer, DAC (digital analog converting) transform unit circuit, USB interface control circuit, man-machine interface circuit, and other logic control circuit. Download the marking information which is processed by computer to U disk, DSP read the information by USB interface on time, then processing it, adopt the DSP inter timer control the marking time sequence, output the scanner control signal by D/A parts. Apply the technology can realize marking offline, thereby reduce the product cost, increase the product efficiency. The system have good effect in actual unit markings, the marking speed is more quickly than PCI control card to 20 percent. It has application value in practicality.

  3. Predictive Thermal Control Technology for Stable Telescope

    Science.gov (United States)

    Stahl, H. Philip

    Predictive Thermal Control (PTC) project is a multiyear effort to develop, demonstrate, mature towards TRL6, and assess the utility of model based Predictive Thermal Control technology to enable a thermally stable telescope. PTC demonstrates technology maturation by model validation and characterization testing of traceable components in a relevant environment. PTC's efforts are conducted in consultation with the Cosmic Origins Office and NASA Program Analysis Groups. To mature Thermally Stable Telescope technology, PTC has three objectives: • Validate models that predict thermal optical performance of real mirrors and structure based on their designs and constituent material properties, i.e. coefficient of thermal expansion (CTE) distribution, thermal conductivity, thermal mass, etc. • Derive thermal system stability specifications from wavefront stability requirements. • Demonstrate utility of Predictive Thermal Control for achieving thermal stability. To achieve these objectives, PTC has five quantifiable milestones: 1. Develop a high-fidelity model of the AMTD-2 1.5 meter ULE® mirror, including 3D CTE distribution and reflective optical coating, that predicts its optical performance response to steady-state and dynamic thermal gradients under bang/bang and proportional thermal control. 2. Derive specifications for thermal control system as a function of wavefront stability. 3. Design and build a predictive Thermal Control System for a 1.5 meter ULE® mirror using new and existing commercial-off-the-shelf components that sense temperature changes at the 1mK level and actively controls the mirrors thermal environment at the 20mK level. 4. Validate the model by testing a 1.5-m class ULE® mirror in a relevant thermal vacuum environment in the MSFC X-ray and Cryogenic Facility (XRCF) test facility. 5. Use validated model to perform trade studies to optimize thermo-optical performance as a function of mirror design, material selection, mass, etc. PTC advances

  4. The future for weed control and technology.

    Science.gov (United States)

    Shaner, Dale L; Beckie, Hugh J

    2014-09-01

    This review is both a retrospective (what have we missed?) and prospective (where are we going?) examination of weed control and technology, particularly as it applies to herbicide-resistant weed management (RWM). Major obstacles to RWM are discussed, including lack of diversity in weed management, unwillingness of many weed researchers to conduct real integrated weed management research or growers to accept recommendations, influence or role of agrichemical marketing and governmental policy and lack of multidisciplinary research. We then look ahead to new technologies that are needed for future weed control in general and RWM in particular, in areas such as non-chemical and chemical weed management, novel herbicides, site-specific weed management, drones for monitoring large areas, wider application of 'omics' and simulation model development. Finally, we discuss implementation strategies for integrated weed management to achieve RWM, development of RWM for developing countries, a new classification of herbicides based on mode of metabolism to facilitate greater stewardship and greater global exchange of information to focus efforts on areas that maximize progress in weed control and RWM. There is little doubt that new or emerging technologies will provide novel tools for RMW in the future, but will they arrive in time? © 2013 Her Majesty the Queen in Right of Canada Pest Management Science © 2013 Society of Chemical Industry.

  5. Preliminary Analysis of Aircraft Loss of Control Accidents: Worst Case Precursor Combinations and Temporal Sequencing

    Science.gov (United States)

    Belcastro, Christine M.; Groff, Loren; Newman, Richard L.; Foster, John V.; Crider, Dennis H.; Klyde, David H.; Huston, A. McCall

    2014-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes, and can result from a wide spectrum of hazards, often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and their validation must provide a means of assessing system effectiveness and coverage of these hazards. This requires the definition of a comprehensive set of LOC test scenarios based on accident and incident data as well as future risks. This paper defines a comprehensive set of accidents and incidents over a recent 15 year period, and presents preliminary analysis results to identify worst-case combinations of causal and contributing factors (i.e., accident precursors) and how they sequence in time. Such analyses can provide insight in developing effective solutions for LOC, and form the basis for developing test scenarios that can be used in evaluating them. Preliminary findings based on the results of this paper indicate that system failures or malfunctions, crew actions or inactions, vehicle impairment conditions, and vehicle upsets contributed the most to accidents and fatalities, followed by inclement weather or atmospheric disturbances and poor visibility. Follow-on research will include finalizing the analysis through a team consensus process, defining future risks, and developing a comprehensive set of test scenarios with correlation to the accidents, incidents, and future risks. Since enhanced engineering simulations are required for batch and piloted evaluations under realistic LOC precursor conditions, these test scenarios can also serve as a high-level requirement for defining the engineering simulation enhancements needed for generating them.

  6. Virtual reality therapy versus cognitive behavior therapy for social phobia: a preliminary controlled study.

    Science.gov (United States)

    Klinger, E; Bouchard, S; Légeron, P; Roy, S; Lauer, F; Chemin, I; Nugues, P

    2005-02-01

    Social phobia is one of the most frequent mental disorders and is accessible to two forms of scientifically validated treatments: anti-depressant drugs and cognitive behavior therapies (CBT). In this last case, graded exposure to feared social situations is one of the fundamental therapeutic ingredients. Virtual reality technologies are an interesting alternative to the standard exposure in social phobia, especially since studies have shown its usefulness for the fear of public speaking. This paper reports a preliminary study in which a virtual reality therapy (VRT), based on exposure to virtual environments, was used to treat social phobia. The sample consisted of 36 participants diagnosed with social phobia assigned to either VRT or a group-CBT (control condition). The virtual environments used in the treatment recreate four situations dealing with social anxiety: performance, intimacy, scrutiny, and assertiveness. With the help of the therapist, the patient learns adapted cognitions and behaviors in order to reduce anxiety in the corresponding real situations. Both treatments lasted 12 weeks, and sessions were delivered according to a treatment manual. Results showed statistically and clinically significant improvement in both conditions. The effect-sizes comparing the efficacy of VRT to the control traditional group-CBT revealed that the differences between the two treatments are trivial.

  7. Environmental Survey preliminary report, Morgantown Energy Technology Center, Morgantown, West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Morgantown Energy Technology Center (METC) conducted November 30 through December 4, 1987. In addition, the preliminary findings of the Laramie Project Office (LPO) Survey, which was conducted as part of the METC Survey on January 25 through 29, 1988, are presented in Appendices E and F. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with METC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at METC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities at METC. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the results will be incorporated into the METC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey METC. 60 refs., 28 figs., 43 tabs.

  8. Euler Technology Assessment program for preliminary aircraft design employing SPLITFLOW code with Cartesian unstructured grid method

    Science.gov (United States)

    Finley, Dennis B.

    1995-01-01

    This report documents results from the Euler Technology Assessment program. The objective was to evaluate the efficacy of Euler computational fluid dynamics (CFD) codes for use in preliminary aircraft design. Both the accuracy of the predictions and the rapidity of calculations were to be assessed. This portion of the study was conducted by Lockheed Fort Worth Company, using a recently developed in-house Cartesian-grid code called SPLITFLOW. The Cartesian grid technique offers several advantages for this study, including ease of volume grid generation and reduced number of cells compared to other grid schemes. SPLITFLOW also includes grid adaptation of the volume grid during the solution convergence to resolve high-gradient flow regions. This proved beneficial in resolving the large vortical structures in the flow for several configurations examined in the present study. The SPLITFLOW code predictions of the configuration forces and moments are shown to be adequate for preliminary design analysis, including predictions of sideslip effects and the effects of geometry variations at low and high angles of attack. The time required to generate the results from initial surface definition is on the order of several hours, including grid generation, which is compatible with the needs of the design environment.

  9. Avionics and ATC Technology for Mission Control

    Directory of Open Access Journals (Sweden)

    Elena BALMUS

    2015-09-01

    Full Text Available This paper presents a review of the old-fashioned communication and radio navigation techniques as a starting point for the development of new technologies for the Air Traffic Control based on 1940’s era radar. Current research tendencies focus on the reduction of delays and overload in a congested airspace. A key step in providing increased situational awareness for controllers and pilots is sharing operational information to improve access and flexibility. Communication between cockpit and controller through audio channels has become insufficient with the growing number of flights that take to skies every day and every year; therefore the need for alternative solutions to meet that demand has appeared. New technologies use messaging to deliver clearances, coordinates and commands determining the operators of aircraft to see the information, acknowledge, and act. Besides the new means of communication, precision navigation guidance based on GPS signals has been developed for exact alignment and descent of aircraft on approach to land on a runway.

  10. Divison of Environmental Control Technology program, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Mott, William E.

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

  11. Literature concerning control and display technology applicable to the Orbital Maneuvering Vehicle (OMV)

    Science.gov (United States)

    1990-01-01

    A review is presented of the literature concerning control and display technology that is applicable to the Orbital Maneuvering Vehicle (OMV), a system being developed by NASA that will enable the user to remotely pilot it during a mission in space. In addition to the general review, special consideration is given to virtual image displays and their potential for use in the system, and a preliminary partial task analysis of the user's functions is also presented.

  12. A Preliminary Study: Do Alternative Certification Route Programs Develop the Necessary Skills and Knowledge in Assistive Technology?

    Science.gov (United States)

    Bell, Sherry Mee; Cihak, David F.; Judge, Sharon

    2010-01-01

    A large number of special education teachers in the United States are prepared in alternative certification programs and insufficient empirical information exists regarding their knowledge of assistive technology. The purpose of this study was to conduct a preliminary investigation of alternatively licensed special education teachers' knowledge,…

  13. Economics of selected water control technologies and their ...

    African Journals Online (AJOL)

    Economics of selected water control technologies and their successful use: The case of Ethiopia. ... of these controls technologies and institutionalizing some sort of cost recovery schemes. ... DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  14. Preliminary Design of Control Network for HT-7U Tokamak Cryogenic System

    Institute of Scientific and Technical Information of China (English)

    Jin Yibin(金毅彬); Zhuang Ming(庄明); Bai Hongyu(白宏宇)

    2003-01-01

    In the course of the cryoplant modernization, a control network will be set up in order to facilitate the control, the supervision, the centralized data acquisition and the alarm handling of the cryogenic system for HT-7U tokamak. The paper introduces the preliminary design of control network based on the Controller Link Network for HT-7U tokamak cryogenic system. The multi-layer structure mentioned in the paper is the mainstream of automatic control.The control philosophy, the structure of the network and the components for control are also presented.

  15. A Preliminary Study of the Key Technologies in Rice Seed Production

    Institute of Scientific and Technical Information of China (English)

    Guodong HUA; Guanxi LI; Delong MENG; Duoming WANG

    2015-01-01

    To study the production technology of rice seeds,with Lianjing 7 as test material,this paper explores the effects of the key rice seed production,processing and storage technologies( such as nitrogen fertilizer application and management,weeding mode in seed breeding field,temperature control of mechanical drying and water control on seed storage) on the quality of rice seeds. The results show that the optimal application proportion of tillering stage dressing and earing fertilizer is 8: 2,followed by 7 : 3; the best time of weeding is booting stage,with the highest purity; the effect of drying and germination rate is best when the temperature is controlled at 44℃ in mechanical drying process; the seed storage quality and storage costs can be guaranteed when the water content of rice seed is controlled at 18%.

  16. Control technology in supply systems. Regelungstechnik in der Versorgungstechnik

    Energy Technology Data Exchange (ETDEWEB)

    Bach, H.; Baumgarth, S.; Forsch, K.; Reeker, J.; Krinninger, H.; Ruosch, E.; Schaefer, A.; Schiele, J.; Schroeder, H.; Treusch, W.

    1983-01-01

    The textbook presents the theoretical fundamentals and practical examples of control technology in supply systems. Practical examples of the fields of heating, air conditioning, and gas supply are presented in detail. The book comprises the following chapters: 1. Introduction to control technology; 2. steady state and time behaviour of control loop elements; 3. controlled systems; 4. control equipment; 5. control elements; 6. closed loops; 7. preset control; 8. meshed control loops; 9. digital control technology; 10. central control systems for supply systems of buildings; 11. examples of supply systems control.

  17. Preliminary statistical assessment towards characterization of biobotic control.

    Science.gov (United States)

    Latif, Tahmid; Meng Yang; Lobaton, Edgar; Bozkurt, Alper

    2016-08-01

    Biobotic research involving neurostimulation of instrumented insects to control their locomotion is finding potential as an alternative solution towards development of centimeter-scale distributed swarm robotics. To improve the reliability of biobotic agents, their control mechanism needs to be precisely characterized. To achieve this goal, this paper presents our initial efforts for statistical assessment of the angular response of roach biobots to the applied bioelectrical stimulus. Subsequent findings can help to understand the effect of each stimulation parameter individually or collectively and eventually reach reliable and consistent biobotic control suitable for real life scenarios.

  18. Preliminary Assessment of Variable Speed Power Turbine Technology on Civil Tiltrotor Size and Performance

    Science.gov (United States)

    Snyder, Christopher A.; Acree, Cecil W., Jr.

    2012-01-01

    A Large Civil Tiltrotor (LCTR) conceptual design was developed as part of the NASA Heavy Lift Rotorcraft Systems Investigation in order to establish a consistent basis for evaluating the benefits of advanced technology for large tiltrotors. The concept has since evolved into the second-generation LCTR2, designed to carry 90 passengers for 1,000 nm at 300 knots, with vertical takeoff and landing capability. This paper performs a preliminary assessment of variable-speed power turbine technology on LCTR2 sizing, while maintaining the same, advanced technology engine core. Six concepts were studied; an advanced, single-speed engine with a conventional power turbine layout (Advanced Conventional Engine, or ACE) using a multi-speed (shifting) gearbox. There were five variable-speed power turbine (VSPT) engine concepts, comprising a matrix of either three or four turbine stages, and fixed or variable guide vanes; plus a minimum weight, twostage, fixed-geometry VSPT. The ACE is the lightest engine, but requires a multi-speed (shifting) gearbox to maximize its fuel efficiency, whereas the VSPT concepts use a lighter, fixed-ratio gearbox. The NASA Design and Analysis of Rotorcraft (NDARC) design code was used to study the trades between rotor and engine efficiency and weight. Rotor performance was determined by Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD II), and engine performance was estimated with the Numerical Propulsion System Simulation (NPSS). Design trades for the ACE vs. VSPT are presented in terms of vehicle gross and empty weight, propulsion system weight and mission fuel burn for the civil mission. Because of its strong effect on gearbox weight and on both rotor and engine efficiency, rotor speed was chosen as the reference design variable for comparing design trades. Major study assumptions are presented and discussed. Impressive engine power-to-weight and fuel efficiency reduced vehicle sensitivity to propulsion system choice

  19. Preliminary study on three pathogens with potential biological control in Barnyard grass (Echinochloa crus galli)

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@ More than 10 species of pathogenic fungi were isolated from the naturally infected leaves of barnyard grass (Echinochloa crus-galli) in paddy. After preliminary bioassaying, it was found that the Alternaria alternata (Fr.) keissler(AA), Exserohilum monoceras (EM),and "99-10" were three potential agents for biological control of barnyard grass.

  20. CFD Modeling for Mercury Control Technology

    Energy Technology Data Exchange (ETDEWEB)

    Madsen, J.I.

    2006-12-01

    Compliance with the Clean Air Mercury Rule will require implementation of dedicated mercury control solutions at a significant portion of the U.S. coal-fired utility fleet. Activated Carbon Injection (ACI) upstream of a particulate control device (ESP or baghouse) remains one of the most promising near-term mercury control technologies. The DOE/NETL field testing program has advanced the understanding of mercury control by ACI, but a persistent need remains to develop predictive models that may improve the understanding and practical implementation of this technology. This presentation describes the development of an advanced model of in-flight mercury capture based on Computational Fluid Dynamics (CFD). The model makes detailed predictions of the induct spatial distribution and residence time of sorbent, as well as predictions of mercury capture efficiency for particular sorbent flow rates and injection grid configurations. Hence, CFD enables cost efficient optimization of sorbent injection systems for mercury control to a degree that would otherwise be impractical both for new and existing plants. In this way, modeling tools may directly address the main cost component of operating an ACI system – the sorbent expense. A typical 300 MW system is expected to require between $1 and $2 million of sorbent per year, and so even modest reductions (say 10-20%) in necessary sorbent feed injection rates will quickly make any optimization effort very worthwhile. There are few existing models of mercury capture, and these typically make gross assumptions of plug gas flow, zero velocity slip between particle and gas phase, and uniform sorbent dispersion. All of these assumptions are overcome with the current model, which is based on first principles and includes mass transfer processes occurring at multiple scales, ranging from the large-scale transport in the duct to transport within the porous structure of a sorbent particle. In principle any single one of these processes

  1. Preliminary performance of a vertical-attitude takeoff and landing, supersonic cruise aircraft concept having thrust vectoring integrated into the flight control system

    Science.gov (United States)

    Robins, A. W.; Beissner, F. L., Jr.; Domack, C. S.; Swanson, E. E.

    1985-01-01

    A performance study was made of a vertical attitude takeoff and landing (VATOL), supersonic cruise aircraft concept having thrust vectoring integrated into the flight control system. Those characteristics considered were aerodynamics, weight, balance, and performance. Preliminary results indicate that high levels of supersonic aerodynamic performance can be achieved. Further, with the assumption of an advanced (1985 technology readiness) low bypass ratio turbofan engine and advanced structures, excellent mission performance capability is indicated.

  2. Preliminary Screening of Potential Control Products against Drosophila suzukii

    Directory of Open Access Journals (Sweden)

    Andrew G. S. Cuthbertson

    2014-06-01

    Full Text Available The first recording of Drosophila suzukii in the UK occurred in the south of England during August 2012. Since then sticky traps have continued to record the presence of individuals. Several products (both chemical and biological were investigated for their efficacy against different life-stages of the pest. Both direct and indirect exposure to control products was assessed. Spinosad, chlorantraniliprole and the experimental product, TA2674, showed excellent potential as control agents when used as either a pre- or post-dipping treatment for blueberries with mortalities of 100%, 93% and 98% mortality, respectively, being achieved following pre-treatment. Direct spray application of all products tested had limited impact upon adult flies. Highest mortality (68% was achieved following direct application of TA2674. Entomopathogenic agents (nematodes and fungi tested appeared to reduce fly population development (ranges of 34–44% mortality obtained but would seem unable to eradicate outbreaks. The potential of the tested products to control D. suzukii is discussed.

  3. Preliminary assessment of a hysteroscopic fallopian tube heat and biomaterial technology for permanent female sterilization

    Science.gov (United States)

    Divakar, Prajan; Trembly, B. Stuart; Moodie, Karen L.; Hoopes, P. Jack; Wegst, Ulrike G. K.

    2017-02-01

    Recent failures in hysteroscopic female sterilization procedures have brought into question the implantation of nonresorbable metal devices into the fallopian tubes due to long-term risks such as migration, fragmentation, and tubal perforation. The goal of this study is to assess whether a porous, biodegradable implant can be deposited into the fallopian tube lumen with or without a local mild heat treatment to generate a safe and permanent fallopian tube occlusion/sterilization event. The technologies investigated included freeze-cast collagen-based scaffolds and magnetic nanoparticle (MNP) based scaffolds. In vitro assessment of iron oxide MNP-based scaffolds was performed to determine the absorption rate density (ARD); subsequent computational modeling quantified the thermal in vivo steady state temperature as a function of tubal radius for treatment planning. For collagen-based scaffolds, in vivo testing was performed to study the biocompatibility in a mouse flank model, followed by implantation into an in vivo anestrus feline uterine horn (animal model for the fallopian tube). Biological responses were studied histopathologically. Uterine horn patency was assessed via radiographic imaging. Preliminary studies suggest the MNP-impregnated scaffold and a safe, noninvasive AMF excitation field have potential to generate a sufficient focal fallopian tube thermal dose to create a fibrotic healing event and ultimately, permanent tubal occlusion.

  4. QUALITY CONTROL PARAMETERS OF BRIHAT DASHAMULA TAILA: A PRELIMINARY STUDY

    Directory of Open Access Journals (Sweden)

    Sharma Vinay

    2011-05-01

    Full Text Available Standard analytical parameters of a number of Ayurvedic oils have been described in API. Brihat Dashamula Taila is one of the most commonly used oil by Ayurvedic Physicians. But there no standard analytical parameters are available in any authentic texts. Therefore this study aimed to set the quality control parameters with SOP of Brihat Dashamula Taila and found values like Refractive index (1.47 at 400C, specific gravity (0.923 at 250C Acid value (1.2, Iodine value (92.6 and Saponification value (86.34 may be considered as standard.

  5. Biofeedback treatment for Tourette syndrome: a preliminary randomized controlled trial.

    Science.gov (United States)

    Nagai, Yoko; Cavanna, Andrea E; Critchley, Hugo D; Stern, Jeremy J; Robertson, Mary M; Joyce, Eileen M

    2014-03-01

    To study the clinical effectiveness of biofeedback treatment in reducing tics in patients with Tourette syndrome. Despite advances in the pharmacologic treatment of patients with Tourette syndrome, many remain troubled by their tics, which may be resistant to multiple medications at tolerable doses. Electrodermal biofeedback is a noninvasive biobehavioral intervention that can be useful in managing neuropsychiatric and neurologic conditions. We conducted a randomized controlled trial of electrodermal biofeedback training in 21 patients with Tourette syndrome. After training the patients for 3 sessions a week over 4 weeks, we observed a significant reduction in tic frequency and improved indices of subjective well-being in both the active-biofeedback and sham-feedback (control) groups, but there was no difference between the groups in these measurements. Furthermore, the active-treatment group did not demonstrably learn to reduce their sympathetic electrodermal tone using biofeedback. Our findings indicate that this form of biofeedback training was unable to produce a clinical effect greater than placebo. The main confounding factor appeared to be the 30-minute duration of the training sessions, which made it difficult for patients to sustain a reduction in sympathetic tone when their tics themselves were generating competing phasic electrodermal arousal responses. Despite a negative finding in this study, electrodermal biofeedback training may have a role in managing tics if optimal training schedules can be identified.

  6. Preliminary comparative assessment of land use for the Satellite Power System (SPS) and alternative electric energy technologies

    Science.gov (United States)

    Newsom, D. E.; Wolsko, T.

    1980-01-01

    A preliminary comparative assessment of land use for the satellite power system (SPS), other solar technologies, and alternative electric energy technologies was conducted. The alternative technologies are coal gasification/combined-cycle, coal fluidized-bed combustion (FBC), light water reactor (LWR), liquid metal fast breeder reactor (LMFBR), terrestrial photovoltaics (TPV), solar thermal electric (STE), and ocean thermal energy conversion (OTEC). The major issues of a land use assessment are the quantity, purpose, duration, location, and costs of the required land use. The phased methodology described treats the first four issues, but not the costs. Several past efforts are comparative or single technology assessment are reviewed briefly. The current state of knowledge about land use is described for each technology. Conclusions are drawn regarding deficiencies in the data on comparative land use and needs for further research.

  7. Division of Environmental Control Technology program, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

  8. Controlling Complex Systems and Developing Dynamic Technology

    Science.gov (United States)

    Avizienis, Audrius Victor

    In complex systems, control and understanding become intertwined. Following Ilya Prigogine, we define complex systems as having control parameters which mediate transitions between distinct modes of dynamical behavior. From this perspective, determining the nature of control parameters and demonstrating the associated dynamical phase transitions are practically equivalent and fundamental to engaging with complexity. In the first part of this work, a control parameter is determined for a non-equilibrium electrochemical system by studying a transition in the morphology of structures produced by an electroless deposition reaction. Specifically, changing the size of copper posts used as the substrate for growing metallic silver structures by the reduction of Ag+ from solution under diffusion-limited reaction conditions causes a dynamical phase transition in the crystal growth process. For Cu posts with edge lengths on the order of one micron, local forces promoting anisotropic growth predominate, and the reaction produces interconnected networks of Ag nanowires. As the post size is increased above 10 microns, the local interfacial growth reaction dynamics couple with the macroscopic diffusion field, leading to spatially propagating instabilities in the electrochemical potential which induce periodic branching during crystal growth, producing dendritic deposits. This result is interesting both as an example of control and understanding in a complex system, and as a useful combination of top-down lithography with bottom-up electrochemical self-assembly. The second part of this work focuses on the technological development of devices fabricated using this non-equilibrium electrochemical process, towards a goal of integrating a complex network as a dynamic functional component in a neuromorphic computing device. Self-assembled networks of silver nanowires were reacted with sulfur to produce interfacial "atomic switches": silver-silver sulfide junctions, which exhibit

  9. Preliminary Experimental Results for Indirect Vector-Control of Induction Motor Drives with Forced Dynamics

    Directory of Open Access Journals (Sweden)

    Jan Vittek

    2003-01-01

    Full Text Available The contribution presents an extension of indirect vector control of electric drives employing induction motors to 'Forced Dynamic Control'. This method of control offers an accurate realisation of dynamic response profiles, which can be selected by the user. The developed system can be integrated into a drive with a shaft position encoder or a shaft sensoriess drive, in which only the stator currents are measured. The applied stator voltages are determined by a computed inverter switching algorithm. Simulation results and preliminary experimental results for indirect vector control of an idle running induction motor indicate good agreement with the theoretical predictions.

  10. Preliminary Seafloor Controlled Source EM Results From APPLE

    Science.gov (United States)

    Behrens, J. P.; MacGregor, L.; Constable, S.; Everett, M.

    2001-12-01

    Certain events in the life cycle of oceanic lithosphere are dominantly two-dimensional. These include formation of crust at axial spreading centers and deformation at the lithosphere - asthenosphere boundary. These processes may result in an electrically anisotropic oceanic lithosphere by creating conductive pathways in preferred orientations. Controlled Source Electromagnetic (CSEM) soundings and Magnetotelluric (MT) soundings were made during the Anisotropy and Physics of the Pacific Lithosphere Experiment (APPLE), carried out in February/March 2001 approximately 600 km west of San Diego, California. Twenty seafloor electromagnetic field sensors were deployed: 4 long-wire CSEM recorders with 200 m electrode offsets, 6 high-frequency MT/CSEM recorders with two orthogonal 10 m offset electrodes and two orthogonal induction coil magnetometers, and 10 low-frequency MT recorders with a three-component fluxgate magnetometer and two orthogonal 10 m electric dipoles, 5 of which also recorded CSEM data. Every instrument was recovered, with data, during this primary cruise and a follow-up recovery cruise for the long-period instruments in August 2001. The deep-towed EM transmitter (DASI) was a 100 m horizontal electric dipole, which was towed in a 30 km radius circle around a central core of recorders. A radial tow was also performed. DASI transmitted a 4 Hz square wave throughout the CSEM phase of the experiment. Initial processing of the CSEM data reveals evidence of crustal anisotropy. In particular, transmitted electromagnetic energy is attenuated more strongly when propagating from west to east than from north to south. The difference in attenuation is about a factor of two, at a range of 30 km and a frequency of 4Hz. This confirms earlier results from the PEGASUS experiment, which proposed that oceanic lower crust and upper mantle with east-west trending lineaments of increased conductivity will exhibit greater attenuation of electric fields in the east

  11. Euler Technology Assessment for Preliminary Aircraft Design-Unstructured/Structured Grid NASTD Application for Aerodynamic Analysis of an Advanced Fighter/Tailless Configuration

    Science.gov (United States)

    Michal, Todd R.

    1998-01-01

    This study supports the NASA Langley sponsored project aimed at determining the viability of using Euler technology for preliminary design use. The primary objective of this study was to assess the accuracy and efficiency of the Boeing, St. Louis unstructured grid flow field analysis system, consisting of the MACGS grid generation and NASTD flow solver codes. Euler solutions about the Aero Configuration/Weapons Fighter Technology (ACWFT) 1204 aircraft configuration were generated. Several variations of the geometry were investigated including a standard wing, cambered wing, deflected elevon, and deflected body flap. A wide range of flow conditions, most of which were in the non-linear regimes of the flight envelope, including variations in speed (subsonic, transonic, supersonic), angles of attack, and sideslip were investigated. Several flowfield non-linearities were present in these solutions including shock waves, vortical flows and the resulting interactions. The accuracy of this method was evaluated by comparing solutions with test data and Navier-Stokes solutions. The ability to accurately predict lateral-directional characteristics and control effectiveness was investigated by computing solutions with sideslip, and with deflected control surfaces. Problem set up times and computational resource requirements were documented and used to evaluate the efficiency of this approach for use in the fast paced preliminary design environment.

  12. Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

    Science.gov (United States)

    White, Maurice A.; Qiu, Songgang; Augenblick, Jack E.

    2000-01-01

    Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's). .

  13. WebRTC技术初探%A Preliminary Exploration of Arising WebRTC Technology

    Institute of Scientific and Technical Information of China (English)

    屈振华; 李慧云; 张海涛; 龙显军

    2012-01-01

    传统的实时通信应用需要通过下载客户端或安装控件才能使用,这给用户造成一些不便.基于Web的实时通信技术简称WebRTC (Web real-time communication),是最近兴起的一种在Web浏览器内支持音/视频实时通信的新技术.基于该技术,开发者仅需调用简单的JavaScript API即可获得音/视频实时通信能力.该技术仍处在发展的初期阶段,本文将分析和探讨其产生背景、发展现状、技术架构以及对电信运营商的可能影响,希望能从一个较为宏观的角度描绘其发展脉络.%The traditional way to acquire RTC ability is to install a software client or a browser plug-in. This may take an user some tedious steps and prevent the popularization of RTC applications. WebRTC is an arising new technology affiliated to the HTML5 standard which intends to provide pervasive access to RTC ability from an arbitrary browser. It works by integrating a fully functional audio/video RTC architecture into browsers. With this new technology, web application developers can implement powerful browser-based audio/video RTC applications by simply invoking a few JavaScript API. Currently, WebRTC is still at its early stage of development. This paper will give a preliminary exploration to WebRTC by addressing its background, current status, technical architecture, and the probable influence to the telecoms. It can give the reader a portrait of the development roadmap of WebRTC.

  14. Preliminary Design and Analysis of the ARES Atmospheric Flight Vehicle Thermal Control System

    Science.gov (United States)

    Gasbarre, J. F.; Dillman, R. A.

    2003-01-01

    The Aerial Regional-scale Environmental Survey (ARES) is a proposed 2007 Mars Scout Mission that will be the first mission to deploy an atmospheric flight vehicle (AFV) on another planet. This paper will describe the preliminary design and analysis of the AFV thermal control system for its flight through the Martian atmosphere and also present other analyses broadening the scope of that design to include other phases of the ARES mission. Initial analyses are discussed and results of trade studies are presented which detail the design process for AFV thermal control. Finally, results of the most recent AFV thermal analysis are shown and the plans for future work are discussed.

  15. Advanced Instrumentation, Information, and Control Systems Technologies Technical Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Hallbert

    2012-09-01

    Reliable instrumentation, information, and control (II&C) systems technologies are essential to ensuring safe and efficient operation of the U.S. light water reactor (LWR) fleet. These technologies affect every aspect of nuclear power plant (NPP) and balance-of-plant operations. In 1997, the National Research Council conducted a study concerning the challenges involved in modernization of digital instrumentation and control systems in NPPs. Their findings identified the need for new II&C technology integration.

  16. Software tools and preliminary design of a control system for the 40m OAN radiotelescope

    Science.gov (United States)

    de Vicente, P.; Bolaño, R.

    2004-07-01

    The Observatorio Astronómico Nacional (OAN) is building a 40m radiotelescope in its facilities in Yebes (Spain) which will be delivered by April 2004. The servosystem will be controlled by an ACU (Antenna Control Unit), a real time computer running VxWorks which will be commanded from a remote computer (RCC) or from a local computer (LCC) which will act as console. We present the tools we have chosen to develop and use the control system for the RCC and the criteria followed for the choices we made. We also present a preliminary design of the control system on which we are currently working. The RCC will run a server which communicates with the ACU using sockets and with the clients, receivers and backends using OmniOrb, a free implementation of CORBA. Clients running Python will allow the users to control the antenna from any host connected to a LAN or a secure Internet connection.

  17. Impaired motor unit control in paretic muscle post stroke assessed using surface electromyography: a preliminary report.

    Science.gov (United States)

    Hu, Xiaogang; Suresh, Aneesha K; Li, Xiaoyan; Rymer, William Zev; Suresh, Nina L

    2012-01-01

    The objective of this preliminary study was to examine the possible contribution of disordered control of motor unit (MU) recruitment and firing patterns in muscle weakness post-stroke. A novel surface EMG (sEMG) recording and decomposition system was used to record sEMG signals and extract single MU activities from the first dorsal interosseous muscle (FDI) of two hemiparetic stroke survivors. To characterize MU reorganization, an estimate of the motor unit action potential (MUAP) amplitude was derived using spike triggered averaging of the sEMG signal. The MUs suitable for further analysis were selected using a set of statistical tests that assessed the variability of the morphological characteristics of the MUAPs. Our preliminary results suggest a disrupted orderly recruitment based on MUAP size, a compressed recruitment range, and reduced firing rates evident in the paretic muscle compared with the contralateral muscle of one subject with moderate impairment. In contrast, the MU organization was largely similar bilaterally for the subject with minor impairment. The preliminary results suggest that MU organizational changes with respect to recruitment and rate modulation can contribute to muscle weakness post-stroke. The contrasting results of the two subjects indicate that the degree of MU reorganization may be associated with the degree of the functional impairment, which reveals the differential diagnostic capability of the sEMG decomposition system.

  18. A preliminary investigation of the use of throttles for emergency flight control

    Science.gov (United States)

    Burcham, F. W., Jr.; Fullerton, C. Gordon; Gilyard, Glenn B.; Wolf, Thomas D.; Stewart, James F.

    1991-01-01

    A preliminary investigation was conducted regarding the use of throttles for emergency flight control of a multiengine aircraft. Several airplanes including a light twin-engine piston-powered airplane, jet transports, and a high performance fighter were studied during flight and piloted simulations. Simulation studies used the B-720, B-727, MD-11, and F-15 aircraft. Flight studies used the Lear 24, Piper PA-30, and F-15 airplanes. Based on simulator and flight results, all the airplanes exhibited some control capability with throttles. With piloted simulators, landings using manual throttles-only control were extremely difficult. An augmented control system was developed that converts conventional pilot stick inputs into appropriate throttle commands. With the augmented system, the B-720 and F-15 simulations were evaluated and could be landed successfully. Flight and simulation data were compared for the F-15 airplane.

  19. Noise-control needs in the developing energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Keast, D.N.

    1978-03-01

    The noise characteristics of existing energy conversion technologies, e.g., from obtaining and processing fossil fuels to power plants operations, and of developing energy technologies (wind, geothermal sources, solar energy or fusion systems) are discussed in terms of the effects of noise on humans, animals, structures, and equipment and methods for noise control. Regulations for noise control are described. Recommendations are made for further research on noise control and noise effects. (LCL)

  20. Electron Beam Technology for Environmental Pollution Control.

    Science.gov (United States)

    Chmielewski, Andrzej G; Han, Bumsoo

    2016-10-01

    Worldwide, there are over 1700 electron beam (EB) units in commercial use, providing an estimated added value to numerous products, amounting to 100 billion USD or more. High-current electron accelerators are used in diverse industries to enhance the physical and chemical properties of materials and to reduce undesirable contaminants such as pathogens, toxic byproducts, or emissions. Over the past few decades, EB technologies have been developed aimed at ensuring the safety of gaseous and liquid effluents discharged to the environment. It has been demonstrated that EB technologies for flue gas treatment (SO x and NO x removal), wastewater purification, and sludge hygienization can be effectively deployed to mitigate environmental degradation. Recently, extensive work has been carried out on the use of EB for environmental remediation, which also includes the removal of emerging contaminants such as VOCs, endocrine disrupting chemicals (EDCs), and potential EDCs.

  1. Supporting dimensional control by information technology

    NARCIS (Netherlands)

    Wu, R.; Berends, G.; Hoof, P. van; Maas, G.; Tolman, F.P.

    1998-01-01

    In the building industry, there is a necessity of designing the dimensional control plan before starting construction, for the assurance of the defined dimensional quality. The dimensional control plan provides site personnel with information on, among others, setting out and assembling building com

  2. Efficacy of fentanyl transdermal patch in pain control after lower third molar surgery: A preliminary study

    Science.gov (United States)

    Vasovic, Miroslav; Andric, Miroslav; Todorovic, Ljubomir; Kokovic, Vladimir

    2016-01-01

    Background Surgical removal of impacted lower third molars is a common oral surgical procedure, generally followed by moderate to severe postoperative pain. Transdermal drug delivery as a concept offers interesting possibilities for postoperative pain control. The aim of this study was to evaluate the efficacy of transdermal system with fentanyl in relieving pain following impacted lower third molar surgery. Material and Methods Seventeen patients with bilateral impacted lower third molars were included in this preliminary study. For postoperative pain control, patients randomly received a fentanyl patch plus placebo tablet after the first operation and regular (placebo) patch and an analgesic, after the second operation. Analgesia was evaluated during first 24 hours postoperatively according to patients’ reports about time of first pain appearance and additional analgesic consumption. Pain severity was rated using a 10 cm long visual analogue scale (VAS). Results Intensity of postoperative pain and postoperative analgesic consumption were significantly lower after the Fentanyl Transdermal System (FTS) was applied (p<0.05). Duration of postoperative analgesia was significantly higher with FTS when compared to control treatment (p<0.05). Conclusions Based on the results of this preliminary study, transdermal system with fentanyl significantly reduced postoperative pain after third molar surgery. Key words:Analgesia, fentanyl, transdermal administration, third molar surgery, acute pain, postoperative care. PMID:27475691

  3. A preliminary investigation of materialism and impulsiveness as predictors of technological addictions among young adults

    National Research Council Canada - National Science Library

    Roberts, James A; Pirog, 3rd, Stephen F

    2013-01-01

    Background and aims The primary objective of the present research is to investigate the drivers of technological addiction in college students - heavy users of Information and Communication Technology (ICT...

  4. Hazards Control Department annual technology review, 1987

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, R.V.; Anderson, K.J. (eds.)

    1988-07-01

    This document describes some of the research performed in the LLNL Hazards Control Department from October 1986 to September 1987. The sections in the Annual report cover scientific concerns in the areas of Health Physics, Industrial Hygiene, Industrial Safety, Aerosol Science, Resource Management, Dosimetry and Radiation Physics, Criticality Safety, and Fire Science. For a broader overview of the types of work performed in the Hazards Control Department, we have also compiled a selection of abstracts of recent publications by Hazards Control employees. Individual reports are processed separately for the data base.

  5. An Overview of Aircraft Integrated Control Technology

    Science.gov (United States)

    1994-09-01

    and stability augmentation, high hf’ system, steering and brak - ing 22 ’ . An F-15B research aircraft, modified with all-moving canard control...0.2 0.4 0.6 0.8 1.0 1.2 1.4 MACH NUMBER The IFPC system responds to pilot inputs with an automatic blend of aerodynamic control surfaces and thrust...decoupling airframe translation and rotation movements). In general, it was found that a blended combination of direct force and conventional control

  6. Effects of an aquatic exercise program on inhibitory control in children with ADHD: a preliminary study.

    Science.gov (United States)

    Chang, Yu-Kai; Hung, Chiao-Ling; Huang, Chung-Ju; Hatfield, Bradley D; Hung, Tsung-Min

    2014-05-01

    The purpose of this preliminary study was to examine whether an aquatic exercise intervention that involves both aerobic and coordinative exercises influences restraint inhibition in children with ADHD. Thirty participants were assigned to either an aquatic exercise or a wait-list control group. Participants were assessed by Go/Nogo Task and motor ability prior to and after an 8-week exercise intervention (twice per week, 90 min per session) or a control intervention. Significant improvements in accuracy associated with the Nogo stimulus and the coordination of motor skills were observed over time in the exercise group compared with the control group. Only main effects of group were found for reaction time and accuracy associated with the Go stimulus. These findings suggest that an exercise program that involves both quantitative and qualitative exercise characteristics facilitates the restraint inhibition component of behavioral inhibition in children with ADHD.

  7. technologies: controlling african cassava mosaic virus

    African Journals Online (AJOL)

    healthy planting material, rogue infected plants and change varieties in attempts at control. This ... Moreover, obstacles to adoption must be identified and overcome. Key Words: Cassava .... adaptability, ACMD resistance and yield of improved ...

  8. Attendance Control System based on RFID technology

    OpenAIRE

    Nurbek Saparkhojayev; Selim Guvercin

    2012-01-01

    In Kazakhstan, checking students' attendance is one of the important issues for universities, because many universities evaluate students attendance and while giving the final grade, professors consider their total number of appearances on classes during the whole semester. This brings to the idea of having some tool to control students attendance. Some universities prefer to use paper sheet for controlling attendance, whereas some universities prefer to use paper sheet for checking students'...

  9. Attitude Control Subsystem for the Advanced Communications Technology Satellite

    Science.gov (United States)

    Hewston, Alan W.; Mitchell, Kent A.; Sawicki, Jerzy T.

    1996-01-01

    This paper provides an overview of the on-orbit operation of the Attitude Control Subsystem (ACS) for the Advanced Communications Technology Satellite (ACTS). The three ACTS control axes are defined, including the means for sensing attitude and determining the pointing errors. The desired pointing requirements for various modes of control as well as the disturbance torques that oppose the control are identified. Finally, the hardware actuators and control loops utilized to reduce the attitude error are described.

  10. Preliminary market assessment of fluidized-bed waste-heat recovery technology

    Energy Technology Data Exchange (ETDEWEB)

    Campos, F.T.; Fey, C.L.; Grogan, P.J.; Klein, N.P.

    1980-06-01

    A preliminary assessment of fluidized-bed waste-heat recovery (FBWHR) system market potential is presented with emphasis on the factors influencing industrial acceptability. Preliminary market potential areas are identified based on the availability of waste heat. Trends in energy use are examined to see the effect they might have on these market potential areas in the future. Focus groups interviews are used to explore important factors in the industrial decision-making process. These important factors are explored quantitatively in a survey of industrial plant engineers. The survey deals with the waste-heat boiler configuration of the FBWHR system. Results indicate market acceptance of the fluidized-bed waste-heat boiler could be quite low.

  11. Past and ongoing researches for magnetic force control technology

    Energy Technology Data Exchange (ETDEWEB)

    Mori, T.; Nishijima, Shigehiro [Osaka University, Osaka (Japan)

    2016-03-15

    The technologies using magnetic force control have been investigated toward application in various fields. Some of them have been put into practical use as the results of technological development. This paper introduces our technical development in the field of water processing, scale removal, magnetic drug delivery system, decontamination of radioactive substances and resources recycling.

  12. Environmental control technology for atmospheric carbon dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, M; Albanese, A S

    1980-01-01

    The impact of fossil fuel use in the United States on worldwide CO/sub 2/ emissions and the impact of increased coal utilization on CO/sub 2/ emission rates are assessed. The aspects of CO/sub 2/ control are discussed as well as the available CO/sub 2/ control points (CO/sub 2/ removal sites). Two control scenarios are evaluated, one based on the absorption of CO/sub 2/ contained in power plant flue gas by seawater; the other, based on absorption of CO/sub 2/ by MEA (Mono Ethanol Amine). Captured CO/sub 2/ is injected into the deep ocean in both cases. The analyses indicate that capture and disposal by seawater is energetically not feasible, whereas capture and disposal using MEA is a possibility. However, the economic penalities of CO/sub 2/ control are significant. The use of non-fossil energy sources, such as hydroelectric, nuclear or solar energy is considered as an alternative for limiting and controlling CO/sub 2/ emissions resulting from fossil energy usage.

  13. Adaptive Controller Design for Faulty UAVs via Quantum Information Technology

    Directory of Open Access Journals (Sweden)

    Fuyang Chen

    2012-12-01

    Full Text Available In this paper, an adaptive controller is designed for a UAV flight control system against faults and parametric uncertainties based on quantum information technology and the Popov hyperstability theory. First, considering the bounded control input, the state feedback controller is designed to make the system stable. The model of adaptive control is introduced to eliminate the impact by the uncertainties of system parameters via quantum information technology. Then, according to the model reference adaptive principle, an adaptive control law based on the Popov hyperstability theory is designed. This law enable better robustness of the flight control system and tracking control performances. The closed-loop system's stability is guaranteed by the Popov hyperstability theory. The simulation results demonstrate that a better dynamic performance of the UAV flight control system with faults and parametric uncertainties can be maintained with the proposed method.

  14. Adaptive Controller Design for Faulty UAVs via Quantum Information Technology

    Directory of Open Access Journals (Sweden)

    Fuyang Chen

    2012-12-01

    Full Text Available In this paper, an adaptive controller is designed for a UAV flight control system against faults and parametric uncertainties based on quantum information technology and the Popov hyperstability theory. First, considering the bounded control input, the state feedback controller is designed to make the system stable. The model of adaptive control is introduced to eliminate the impact by the uncertainties of system parameters via quantum information technology. Then, according to the model reference adaptive principle, an adaptive control law based on the Popov hyperstability theory is designed. This law enable better robustness of the flight control system and tracking control performances. The closed‐loop system’s stability is guaranteed by the Popov hyperstability theory. The simulation results demonstrate that a better dynamic performance of the UAV flight control system with faults and parametric uncertainties can be maintained with the proposed method.

  15. Profitability of soil erosion control technologies in eastern Uganda ...

    African Journals Online (AJOL)

    Profitability of soil erosion control technologies in eastern Uganda Highlands. ... Log in or Register to get access to full text downloads. ... Abstract. The lack of farmer awareness of costs and benefits associated with the use of sustainable land ...

  16. APPLICATION OF MODEM INFORMATION TECHNOLOGIES IN THE ENTERPRISE CONTROL

    Directory of Open Access Journals (Sweden)

    A. E. Nikiforov

    2007-01-01

    Full Text Available The modern technologies of the enterprise control help to make the process of taking decisions more correct and reasonable, promote better understanding of real situations and appropriate response to them.

  17. Study On Machining Processing Technology Risk Control

    Institute of Scientific and Technical Information of China (English)

    Li Xiqing

    2015-01-01

    In the industrial production process,only to ful y guarantee the machining production safety, it can been ensured that the smooth completion of machining process.Under this back ground,in the machining production process,the machinery processing safety would been ful y concerned,several factors, which may lead to the problem of mechanical processing and production process,were analyzed,and the relevant control strategies were researched.In view of this situation,this paper wil specifical y combined with the machining process characteristics to study the machining process manufacturability risk control.

  18. Elastic optical networks architectures, technologies, and control

    CERN Document Server

    Velasco, Luis

    2016-01-01

    This book addresses challenges and potential solutions surrounding the dramatic yearly increases in bandwidth demand. The editors discuss the predicament surrounding current growth, which is predicted to continue because of the proliferation of disruptive, high bandwidth applications like video and cloud applications. They also discuss that in addition to growth, traffic will become much more dynamic, both in time and direction. The contributors show how large changes in traffic magnitude during a 24-hour period can be observed, as day-time business users have very different demands to evening-time residential customers, and how this plays into addressing future challenges. In addition, they discuss potential solutions for the issues surrounding situations where multiple content and cloud service providers offer competing services, causing the traffic direction to become more dynamic. The contributors discuss that although the WDM transponder technology can be upgraded to 100Gb/s in the short to medium term, ...

  19. International Conference on Systems, Control and Information Technologies 2016

    CERN Document Server

    Kaliczyńska, Małgorzata

    2017-01-01

    This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

  20. Systematic approach to balanced control technology management

    Directory of Open Access Journals (Sweden)

    I. N. Vorobjev

    2012-01-01

    Full Text Available Articulated understanding of important systemic controls that exist in the modern world. Identify and describe the key success factors of a balanced management of organizational change. Proposed register of compliance balanced scorecard target values and objectives of balanced management of industrial organizations.

  1. 40 CFR 51.1010 - Requirements for reasonably available control technology (RACT) and reasonably available control...

    Science.gov (United States)

    2010-07-01

    ... control technology (RACT) and reasonably available control measures (RACM). 51.1010 Section 51.1010... PREPARATION, ADOPTION, AND SUBMITTAL OF IMPLEMENTATION PLANS Provisions for Implementation of PM2.5 National Ambient Air Quality Standards § 51.1010 Requirements for reasonably available control technology...

  2. Preliminary Drop Time Analysis of a Control Rod Using CFD Code

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myoung Hwan; Park, Jin Seok; Lee, Won Jae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Jun Hong [SEST Co., Seoul (Korea, Republic of)

    2010-05-15

    A control rod drive mechanism (CRDM) is a reactor regulating system, which can insert and withdraw a control rod containing a neutron absorbing material to control the reactivity of the reactor core. The latch type CRDM for the SMART (System-integrated Modular Advanced ReacTor) is going to be used. The drop time of the control rod in the design stage is one of important parameters for a safety analysis of the reactor. When the control rod is falling down into the core, it is retarded by various forces acting on it such as fluid resistance buoyancy and mechanical friction caused by contacting the inner surface of the guide thimble, etc.. However, complicated coupling of the various forces makes it difficult to predict the drop behavior. This paper describes the development of the 3D CFD analysis model using a FLUENT code. The single control rod of the Westinghouse 17x17 type optimized fuel assembly (W-OFA) was considered for the verification of the CFD model. A preliminary drop time analysis for the SMART with the simulated control rod was performed

  3. Development of Plant Control Diagnosis Technology and Increasing Its Applications

    Science.gov (United States)

    Kugemoto, Hidekazu; Yoshimura, Satoshi; Hashizume, Satoru; Kageyama, Takashi; Yamamoto, Toru

    A plant control diagnosis technology was developed to improve the performance of plant-wide control and maintain high productivity of plants. The control performance diagnosis system containing this technology picks out the poor performance loop, analyzes the cause, and outputs the result on the Web page. Meanwhile, the PID tuning tool is used to tune extracted loops from the control performance diagnosis system. It has an advantage of tuning safely without process changes. These systems are powerful tools to do Kaizen (continuous improvement efforts) step by step, coordinating with the operator. This paper describes a practical technique regarding the diagnosis system and its industrial applications.

  4. Preliminary analysis of patent trends for sodium/sulfur battery technology

    Energy Technology Data Exchange (ETDEWEB)

    Triplett, M.B.; Winter, C.; Ashton, W.B.

    1985-07-01

    This document summarizes development trends in sodium/sulfur battery technology based on data from US patents. Purpose of the study was to use the activity, timing and ownership of 285 US patents to identify and describe broad patterns of change in sodium/sulfur battery technology. The analysis was conducted using newly developed statistical and computer graphic techniques for describing technology development trends from patent data. This analysis suggests that for some technologies trends in patent data provide useful information for public and private R and D planning.

  5. Siemens: Smart Technologies for Large Control Systems

    CERN Document Server

    CERN. Geneva; BAKANY, Elisabeth

    2015-01-01

    The CERN Large Hadron Collider (LHC) is known to be one of the most complex scientific machines ever built by mankind. Its correct functioning relies on the integration of a multitude of interdependent industrial control systems, which provide different and essential services to run and protect the accelerators and experiments. These systems have to deal with several millions of data points (e.g. sensors, actuators, configuration parameters, etc…) which need to be acquired, processed, archived and analysed. Since more than 20 years, CERN and Siemens have developed a strong collaboration to deal with the challenges for these large systems. The presentation will cover the current work on the SCADA (Supervisory Control and Data Acquisition) systems and Data Analytics Frameworks.

  6. Technology research for digital flight control

    Science.gov (United States)

    Carestia, R. A.

    1983-01-01

    The use of advanced digital systems for flight control and guidance for a specific mission is investigated. The research areas include advanced electronic system architectures, tests with the global positioning system (GPS) in a helicopter, and advanced integrated systems concept for rotorcraft. Emphasis is on a search and rescue mission, differential global positioning systems to provide a data base of performance information for navigation, and a study to determine the present usage and trends of microcomputers and microcomputer components in the avionics industries.

  7. Control at a distance as self-control: the renewal of the myth of control through technology

    OpenAIRE

    Dambrin, Claire

    2007-01-01

    This paper draws on socio-institutional research on accounting technology. It underlines the ability of one type of accounting technology (performance measurement technology) to be a base for control at a distance since this technology links together discourse and calculation.

  8. Wireless communication technology for modular mechatronic controllers

    CSIR Research Space (South Africa)

    Bright, G

    2010-08-01

    Full Text Available )h(u,,hu,,hxx ?+???+???+?= ?+ 5.17 7 For a MIMO system with m sensors and n actuators, the system equations are: ( ) ( ) ( ) ( )tttt vuBxAx ++=? 5.18 where A and B are now matrices. The longest sensor to controller delay is defined as: ( )scmk2sck1scksck ,...,,max....16 can be sampled into: k1k can k 1ca k sc kk can k 1ca k sc kk1k ,...,,,...,, vu?u??xx 10 +?????? ???+?????? ???+= ?+ 5.21 where xk = x(kh), heA? = 5.22 ?? ??? ? ?????? ????????? ???=?????? ??? can k sc k n 0 1ca k sc k...

  9. "ICreate": Preliminary Usability Testing of Apps for the Music Technology Classroom

    Science.gov (United States)

    Order, Simon

    2015-01-01

    Some educators have expressed a belief that smart phones and tablet devices will revolutionize teaching in technology-based music instruction. Arguably, such devices are the next step in music pedagogy. Some have suggested that the emergence of the iPad in the music technology landscape will democratize music making further in the same way that…

  10. NOVEL TECHNOLOGIES FOR GASEOUS CONTAMINANTS CONTROL

    Energy Technology Data Exchange (ETDEWEB)

    B.S. Turk; T. Merkel; A. Lopez-Ortiz; R.P. Gupta; J.W. Portzer; G.N. Krishnan; B.D. Freeman; G.K. Fleming

    2001-09-30

    The overall objective of this project is to develop technologies for cleaning/conditioning the syngas from an integrated gasification combined cycle (IGCC) system to meet the tolerance limits for contaminants such as H{sub 2}S, COS, NH{sub 3}, HCN, HCl, and alkali for fuel cell and chemical production applications. RTI's approach is to develop a modular system that (1) removes reduced sulfur species to sub-ppm levels using a hybrid process consisting of a polymer membrane and a regenerable ZnO-coated monolith or a mixed metal oxide sorbent; (2) removes hydrogen chloride vapors to sub-ppm levels using an inexpensive, high-surface area material; and (3) removes NH{sub 3} with acidic adsorbents. RTI is working with MEDAL, Inc., and North Carolina State University (NCSU) to develop polymer membrane technology for bulk removal of H{sub 2}S from syngas. These membranes are being engineered to remove the acid gas components (H{sub 2}S, CO{sub 2}, NH{sub 3}, and H{sub 2}O) from syngas by focusing on the ''solubility selectivity'' of the novel polymer compositions. The desirable components of the syngas (H{sub 2} and CO) are maintained at high-pressure conditions as a non-permeate stream while the impurities are transported across the membrane to the low pressure side. RTI tested commercially available and novel materials from MEDAL using a high-temperature, high-pressure (HTHP) permeation apparatus. H{sub 2}S/H{sub 2} selectivities >30 were achieved, although there was a strong negative dependence with temperature. MEDAL believes that all the polymer compositions tested so far can be prepared as hollow fiber membrane modules using the existing manufacturing technology. For fuel cell and chemical applications, additional sulfur removal (beyond that achievable with the membranes) is required. To overcome limitations of conventional ZnO pellets, RTI is testing a monolith with a thin coating of high surface area zinc-oxide based materials

  11. Fractionating the role of executive control in control over worry: a preliminary investigation.

    Science.gov (United States)

    Hallion, Lauren S; Ruscio, Ayelet Meron; Jha, Amishi P

    2014-03-01

    Uncontrollable anxious thought characterizes a number of emotional disorders. Little is known, however, about the cognitive mechanisms that underlie the ability to control these thoughts. The present study investigated the extent to which two well-characterized executive control processes--working memory and inhibition--are engaged when an individual attempts to control worry. Participants completed a concurrent assessment of these processes while attempting to control personally-relevant worried and neutral thoughts. To examine the specificity of these effects to attempts to control worry, versus a residual "depletion" effect of having previously engaged in worry, a subset of participants completed the assessment without instructions to control their worried or neutral thoughts. Attempts to control worry engaged working memory and inhibition to a greater extent than did attempts to control neutral thought. This increased engagement was not explained solely by anxious affect, nor was it significantly associated with trait worry. Engagement did not differ by group, suggesting that executive control depletion by worry cannot be dismissed as an alternative explanation of these findings. These results highlight working memory and inhibition as potentially valuable constructs for deepening our understanding of the nature and treatment of worry and its control.

  12. Distributed technologies in California's energy future: A preliminary report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, M.; Craig, P.; McGuire, C.B.; Simmons, M. (eds.)

    1977-09-01

    The chapters in Volume 2 of Distributed Energy Systems in California's Future are: Environmental Impacts of Alternative Energy Technologies for California; Land Use Configurations and the Utilization of Distributive Energy Technology; Land Use Implications of a Dispersed Energy Path; Belief, Behavior, and Technologies as Driving Forces in Transitional Stages--The People Problem in Dispersed Energy Futures; Development of an Energy Attitude Survey; Interventions to Influence Firms Toward the Adoption of ''Soft'' Energy Technology; The Entry of Small Firms into Distributed Technology Energy Industries; Short-Term Matching of Supply and Demand in Electrical Systems with Renewable Sources; Vulnerability of Renewable Energy Systems; and District Heating for California.

  13. [Key Technology and Quantity Control of Wearable Medical Devices].

    Science.gov (United States)

    Cui, Hongen; Yao, Shaowei

    2015-03-01

    In recent years, because the wearable medical devices can indicate the health monitoring index of blood sugar, blood pressure, heart rate, oxygen content, temperature, respiration of the human body anytime and anywhere, can also be used for the treatment of various diseases, accompanied by the development of large data, which will bring a subversive revolution for the medical device industry. This paper introduces the development of wearable devices, key technical index of main products, and to make a preliminary study on its quantity control.

  14. PRELIMINARY ASSESSMENT OF THE LOW-TEMPERATURE WASTE FORM TECHNOLOGY COUPLED WITH TECHNETIUM REMOVAL

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K.

    2014-05-13

    The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) have been chartered to implement a science and technology program addressing low-temperature waste forms for immobilization of DOE aqueous waste streams, including technetium removal as an implementing technology. As a first step, the laboratories examined the technical risks and uncertainties associated with the Cast Stone waste immobilization projects at Hanford. Science and technology needs were identified for work associated with 1) conducting performance assessments and risk assessments of waste form and disposal system performance, and 2) technetium chemistry in tank wastes and separations of technetium from waste processing streams. Technical approaches to address the science and technology needs were identified and an initial sequencing priority was suggested. The following table summarizes the most significant science and technology needs and associated approaches to address those needs. These approaches and priorities will be further refined and developed as strong integrated teams of researchers from national laboratories, contractors, industry, and academia are brought together to provide the best science and technology solutions. Implementation of a science and technology program that addresses these needs by pursuing the identified approaches will have immediate benefits to DOE in reducing risks and uncertainties associated with near-term decisions regarding supplemental immobilization at Hanford. Longer term, the work has the potential for cost savings and for providing a strong technical foundation for future

  15. Pseudoscience in Instructional Technology: The Case of Learner Control Research.

    Science.gov (United States)

    Reeves, Thomas C.

    Scientific research that is conducted without the structure of a supporting scientific paradigm should be labeled pseudoscience in that such research is deceptive or false science. It is argued that much of the research in educational technology is pseudoscience, with the focus on learner control research. Learner control is the design feature of…

  16. Open modular architecture controls at GM Powertrain: technology and implementation

    Science.gov (United States)

    Bailo, Clark P.; Yen, C. J.

    1997-01-01

    General Motors Powertrain Group (GMPTG) has been the leader in implementing open, modular architecture controller (OMAC) technologies in its manufacturing applications since 1986. The interest in OMAC has been greatly expanded for the past two years because of the advancement of personal computer technologies and the publishing of the OMAC whitepaper by the US automotive companies stating the requirements of OMAC technologies in automotive applications. The purpose of this paper is to describe the current OMAC projects and the future direction of implementation at GMPTG. An overview of the OMAC project and the definition of the OMAC concept are described first. The rationale of pursuing open technologies is explained from the perspective of GMPTG in lieu of its agile manufacturing strategy. Examples of existing PC-based control applications are listed to demonstrate the extensive commitment to PC-based technologies that has already been put in place. A migration plan form PC-based to OMAC-based systems with the thorough approach of validation are presented next to convey the direction that GMPTG is taking in implementing OMAC technologies. Leveraged technology development projects are described to illustrate the philosophy and approaches toward the development of OMAC technologies at GMPTG. Finally, certain implementation issues are discussed to emphasize efforts that are still required to have successful implementations of OMAC systems.

  17. Technology for CO{sub 2} emission monitoring and control

    Energy Technology Data Exchange (ETDEWEB)

    Joyce, E.L. Jr.; Unkefer, P.J.; Pendergrass, J.H.; Parkinson, W.J.; Loose, V.W.; Brainard, J.R.

    1998-12-31

    The authors examined three specific areas relative to CO{sub 2} emissions and controls: (1) the effect of deregulation of the utility industry on emissions, (2) the role of advanced power systems in reducing emissions, and (3) developing CO{sub 2} mitigation technologies. In this work the Energy Technologies program office at Los Alamos attempted to initiate an integrated approach that includes a range of tasks involving both point and distributed CO{sub 2} control. The authors have examined evolving mitigation (separation and sequestration) technologies for CO{sub 2} disposal. The separation of hydrogen gas from high-temperature CO{sub 2}-containing streams is a critical component of carbon dioxide mitigation technology, and cost-effective point sequestration will require separation of CO{sub 2} from H{sub 2}. They investigated four types of separation techniques: two high-temperature membrane technologies, an intermediate-temperature membrane technology, and a separation technology based on the formation of CO{sub 2} hydrate compounds through reaction of CO{sub 2} with water at near freezing conditions. At Los Alamos, sequestration technologies are being developed along three principal areas: mineral sequestration of CO{sub 2}, the enhancement of natural sinks using biotechnology methods, and the conversion of CO{sub 2} to methanol using high-temperature photolysis.

  18. INL Control System Situational Awareness Technology Annual Report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin; Robert Erbes

    2012-10-01

    The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

  19. Advances in control system technology for aerospace applications

    CERN Document Server

    2016-01-01

    This book is devoted to Control System Technology applied to aerospace and covers the four disciplines Cognitive Engineering, Computer Science, Operations Research, and Servo-Mechanisms. This edited book follows a workshop held at the Georgia Institute of Technology in June 2012, where the today's most important aerospace challenges, including aerospace autonomy, safety-critical embedded software engineering, and modern air transportation were discussed over the course of two days of intense interactions among leading aerospace engineers and scientists. Its content provide a snapshot of today's aerospace control research and its future, including Autonomy in space applications, Control in space applications, Autonomy in aeronautical applications, Air transportation, and Safety-critical software engineering.

  20. Preliminary Accident Analyses for Conversion of the Massachusetts Institute of Technology Reactor (MITR) from Highly Enriched to Low Enriched Uranium

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, Floyd E. [Argonne National Lab. (ANL), Argonne, IL (United States); Olson, Arne P. [Argonne National Lab. (ANL), Argonne, IL (United States); Wilson, Erik H. [Argonne National Lab. (ANL), Argonne, IL (United States); Sun, Kaichao S. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Newton, Jr., Thomas H. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Hu, Lin-wen [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2013-09-30

    The Massachusetts Institute of Technology Reactor (MITR-II) is a research reactor in Cambridge, Massachusetts designed primarily for experiments using neutron beam and in-core irradiation facilities. It delivers a neutron flux comparable to current LWR power reactors in a compact 6 MW core using Highly Enriched Uranium (HEU) fuel. In the framework of its non-proliferation policies, the international community presently aims to minimize the amount of nuclear material available that could be used for nuclear weapons. In this geopolitical context most research and test reactors, both domestic and international, have started a program of conversion to the use of LEU fuel. A new type of LEU fuel based on an alloy of uranium and molybdenum (U-Mo) is expected to allow the conversion of U.S. domestic high performance reactors like MITR. This report presents the preliminary accident analyses for MITR cores fueled with LEU monolithic U-Mo alloy fuel with 10 wt% Mo. Preliminary results demonstrate adequate performance, including thermal margin to expected safety limits, for the LEU accident scenarios analyzed.

  1. 75 FR 38128 - Sensata Technologies MA, Inc., Power Controls Division, Formerly Known As Airpax Corp., Cambridge...

    Science.gov (United States)

    2010-07-01

    ... Employment and Training Administration Sensata Technologies MA, Inc., Power Controls Division, Formerly Known..., 2010, applicable to workers of Sansata Technologies MA, Incorporated, Power Controls Division, formerly... under the control of the Cambridge, Maryland location of Sensata Technologies MA, Incorporated,...

  2. Recent development of plasma pollution control technology: a critical review

    Directory of Open Access Journals (Sweden)

    Jen-Shih Chang

    2001-01-01

    Full Text Available Gaseous pollution control, solid and liquid waste treatments have been commercialized based on incineration, catalysis, adsorption, disposal with landfill, etc. More recently technology based on plasmas has become significant due to the advantages such as lower costs, higher treatment and energy efficiencies, smaller space volume, etc. In order to commercialize this new technology, the treatment rate, energy efficiency of treatment, pressure drop of reactor, reusable by-products production rate, must be improved, based on the identifications of major fundamental mechanism of processes, optimizations of reactor, and power supply for an integrated system. In this work, recent development of plasma pollution control technology was critically reviewed and the principle of processes and reactor technologies were outlined. Special attention will be focused on material processing generated pollutants.

  3. Team Viewer Technology for Remote Control of a Computer

    Directory of Open Access Journals (Sweden)

    Cornelia Victoria Anghel Drugarin

    2016-10-01

    Full Text Available Team Viewer software is used to remote control our PC. We can use this remote control technology to desktop sharing, online conferences and for file transfer between computers. Basically, using this software, you can ask for help a friend, or professional software to solve problems from a distance, without it having to be physically go to each client / friend in part. After installed and configured Team Viewer application, is complete, we can remote control the computer.

  4. A Single-Session Preliminary Evaluation of an Affordable BCI-Controlled Arm Exoskeleton and Motor-Proprioception Platform.

    Science.gov (United States)

    Elnady, Ahmed Mohamed; Zhang, Xin; Xiao, Zhen Gang; Yong, Xinyi; Randhawa, Bubblepreet Kaur; Boyd, Lara; Menon, Carlo

    2015-01-01

    Traditional, hospital-based stroke rehabilitation can be labor-intensive and expensive. Furthermore, outcomes from rehabilitation are inconsistent across individuals and recovery is hard to predict. Given these uncertainties, numerous technological approaches have been tested in an effort to improve rehabilitation outcomes and reduce the cost of stroke rehabilitation. These techniques include brain-computer interface (BCI), robotic exoskeletons, functional electrical stimulation (FES), and proprioceptive feedback. However, to the best of our knowledge, no studies have combined all these approaches into a rehabilitation platform that facilitates goal-directed motor movements. Therefore, in this paper, we combined all these technologies to test the feasibility of using a BCI-driven exoskeleton with FES (robotic training device) to facilitate motor task completion among individuals with stroke. The robotic training device operated to assist a pre-defined goal-directed motor task. Because it is hard to predict who can utilize this type of technology, we considered whether the ability to adapt skilled movements with proprioceptive feedback would predict who could learn to control a BCI-driven robotic device. To accomplish this aim, we developed a motor task that requires proprioception for completion to assess motor-proprioception ability. Next, we tested the feasibility of robotic training system in individuals with chronic stroke (n = 9) and found that the training device was well tolerated by all the participants. Ability on the motor-proprioception task did not predict the time to completion of the BCI-driven task. Both participants who could accurately target (n = 6) and those who could not (n = 3), were able to learn to control the BCI device, with each BCI trial lasting on average 2.47 min. Our results showed that the participants' ability to use proprioception to control motor output did not affect their ability to use the BCI-driven exoskeleton

  5. A Single-Session Preliminary Evaluation of an Affordable BCI-Controlled Arm Exoskeleton and Motor-Proprioception Platform

    Science.gov (United States)

    Elnady, Ahmed Mohamed; Zhang, Xin; Xiao, Zhen Gang; Yong, Xinyi; Randhawa, Bubblepreet Kaur; Boyd, Lara; Menon, Carlo

    2015-01-01

    Traditional, hospital-based stroke rehabilitation can be labor-intensive and expensive. Furthermore, outcomes from rehabilitation are inconsistent across individuals and recovery is hard to predict. Given these uncertainties, numerous technological approaches have been tested in an effort to improve rehabilitation outcomes and reduce the cost of stroke rehabilitation. These techniques include brain–computer interface (BCI), robotic exoskeletons, functional electrical stimulation (FES), and proprioceptive feedback. However, to the best of our knowledge, no studies have combined all these approaches into a rehabilitation platform that facilitates goal-directed motor movements. Therefore, in this paper, we combined all these technologies to test the feasibility of using a BCI-driven exoskeleton with FES (robotic training device) to facilitate motor task completion among individuals with stroke. The robotic training device operated to assist a pre-defined goal-directed motor task. Because it is hard to predict who can utilize this type of technology, we considered whether the ability to adapt skilled movements with proprioceptive feedback would predict who could learn to control a BCI-driven robotic device. To accomplish this aim, we developed a motor task that requires proprioception for completion to assess motor-proprioception ability. Next, we tested the feasibility of robotic training system in individuals with chronic stroke (n = 9) and found that the training device was well tolerated by all the participants. Ability on the motor-proprioception task did not predict the time to completion of the BCI-driven task. Both participants who could accurately target (n = 6) and those who could not (n = 3), were able to learn to control the BCI device, with each BCI trial lasting on average 2.47 min. Our results showed that the participants’ ability to use proprioception to control motor output did not affect their ability to use the BCI

  6. Malaria mosquito control using edible fish in western Kenya: preliminary findings of a controlled study

    Directory of Open Access Journals (Sweden)

    Omlin Francois X

    2007-08-01

    Full Text Available Abstract Background Biological control methods are once again being given much research focus for malaria vector control. This is largely due to the emerging threat of strong resistance to pesticides. Larvivorous fish have been used for over 100 years in mosquito control and many species have proved effective. In the western Kenyan highlands the larvivorous fish Oreochromis niloticus L. (Perciformes: Cichlidae (formerly Tilapia nilotica is commonly farmed and eaten but has not been previously tested in the field for malaria mosquito control. Methods This fish was introduced into abandoned fishponds at an altitude of 1,880 m and the effect measured over six months on the numbers of mosquito immatures. For comparison an untreated control pond was used. During this time, all ponds were regularly cleared of emergent vegetation and fish re-stocking was not needed. Significant autocorrelation was removed from the time series data, and t-tests were used to investigate within a pond and within a mosquito type any differences before and after the introduction of O. niloticus. Mulla's formula was also used on the raw data to calculate the percentage reduction of the mosquito larvae. Results After O. niloticus introduction, mosquito densities immediately dropped in the treated ponds but increased in the control pond. This increase was apparently due to climatic factors. Mulla's formula was applied which corrects for that natural tendency to increase. The results showed that after 15 weeks the fish caused a more than 94% reduction in both Anopheles gambiae s.l. and Anopheles funestus (Diptera: Culicidae in the treated ponds, and more than 75% reduction in culicine mosquitoes. There was a highly significantly reduction in A. gambiae s.l. numbers when compared to pre-treatment levels. Conclusion This study reports the first field trial data on O. niloticus for malaria mosquito control and shows that this species, already a popular food fish in western Kenya

  7. Detection Technologies, Arms control and nonproliferation technologies. Third/fourth quarters 1993

    Energy Technology Data Exchange (ETDEWEB)

    Staehle, G; Stull, S; Talaber, C; Moulthrop, P [eds.

    1993-12-31

    This issue of Arms Control and Nonproliferation Technologies is another in a series of issues about specific means for detecting and identifying proliferation and other suspect activities outside the realm of arms control treaties. All the projects discussed are funded by the Office of Research and Development of the Department of Energy`s Office of Nonproliferation and National Security.

  8. Application of Autonomous Spacecraft Power Control Technology to Terrestrial Microgrids

    Science.gov (United States)

    Dever, Timothy P.; Trase, Larry M.; Soeder, James F.

    2014-01-01

    This paper describes the potential of the power campus located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio for microgrid development. First, the benefits provided by microgrids to the terrestrial power grid are described, and an overview of Technology Needs for microgrid development is presented. Next, GRC's work on development of autonomous control for manned deep space vehicles, which are essentially islanded microgrids, is covered, and contribution of each of these developments to the microgrid Technology Needs is detailed. Finally, a description is provided of GRC's existing physical assets which can be applied to microgrid technology development, and a phased plan for development of a microgrid test facility is presented.

  9. Developments and the preliminary tests of Resistive GEMs manufactured by a screen printing technology

    CERN Document Server

    Agócs, G; Oliveira, R; Martinego, P; Peskov, Vladimir; Pietropaolo, P; Picchi, P

    2008-01-01

    We report promising initial results obtained with new resistive-electrode GEM (RETGEM) detectors manufactured, for the first time, using screen printing technology. These new detectors allow one to reach gas gains nearly as high as with ordinary GEM-like detectors with metallic electrodes; however, due to the high resistivity of its electrodes the RETGEM, in contrast to ordinary hole-type detectors, has the advantage of being fully spark protected. We discovered that RETGEMs can operate stably and at high gains in noble gases and in other badly quenched gases, such as mixtures of noble gases with air and in pure air; therefore, a wide range of practical applications, including dosimetry and detection of dangerous gases, is foreseeable. To promote a better understanding of RETGEM technology some comparative studies were completed with metallic-electrode thick GEMs. A primary benefit of these new RETGEMs is that the screen printing technology is easily accessible to many research laboratories. This accessibilit...

  10. A preliminary investigation of materialism and impulsiveness as predictors of technological addictions among young adults.

    Science.gov (United States)

    Roberts, James A; Pirog, Stephen F

    2013-03-01

    Background and aims The primary objective of the present research is to investigate the drivers of technological addiction in college students - heavy users of Information and Communication Technology (ICT). The study places cell phone and instant messaging addiction in the broader context of consumption pathologies, investigating the influence of materialism and impulsiveness on these two technologies. Clearly, cell phones serve more than just a utilitarian purpose. Cell phones are used in public and play a vital role in the lives of young adults. The accessibility of new technologies, like cell phones, which have the advantages of portability and an ever increasing array of functions, makes their over-use increasingly likely. Methods College undergraduates (N = 191) from two U.S. universities completed a paper and pencil survey instrument during class. The questionnaire took approximately 15-20 minutes to complete and contained scales that measured materialism, impulsiveness, and mobile phone and instant messaging addiction. Results Factor analysis supported the discriminant validity of Ehrenberg, Juckes, White and Walsh's (2008) Mobile Phone and Instant Messaging Addictive Tendencies Scale. The path model indicates that both materialism and impulsiveness impact the two addictive tendencies, and that materialism's direct impact on these addictions has a noticeably larger effect on cell phone use than instant messaging. Conclusions The present study finds that materialism and impulsiveness drive both a dependence on cell phones and instant messaging. As Griffiths (2012) rightly warns, however, researchers must be aware that one's addiction may not simply be to the cell phone, but to a particular activity or function of the cell phone. The emergence of multi-function smart phones requires that research must dig beneath the technology being used to the activities that draw the user to the particular technology.

  11. Key technologies for the novel distributed numerical control integrated system

    Institute of Scientific and Technical Information of China (English)

    TAO Guibao; LlU Fei; WANG Shilong

    2004-01-01

    A novel distributed numerical control (DNC) integrated system based on plug-in software technology is proposed. It connects new or old numerical control (NC) machine tools which haveinhomogeneous numerical control systems with CAD/CAM system by CANbus network. A DNC computer is able to control 15 sets of NC machine tools reliably at the same time. The novel DNC system increases the efficiency of machine tools and improve the production management level by realizing non-paper production, agile manufacturing, networked manufacturing and so on in the near future. Key technologies to construct the novel DNC integrated system include the integration of inhomogeneous numerical control systems, NC program restart, and algorithm for communication competition. Such system has demonstrated successful applications in some corporations that have acquired good economic benefits and social effects.

  12. Disrupted Tactile Acuity in People With Achilles Tendinopathy: A Preliminary Case-Control Investigation.

    Science.gov (United States)

    Debenham, James; Butler, Prue; Mallows, Adrian; Wand, Benedict M

    2016-12-01

    Study Design Controlled laboratory study, preliminary case-control design. Background The mechanisms that contribute to Achilles tendinopathy remain poorly understood. The disparity between pain experience and peripheral pathology demonstrated in patients with Achilles tendinopathy suggests that changes in central nervous system function may be involved. Objectives To investigate whether lower-limb tactile acuity is impaired in people with nonacute Achilles tendinopathy. Methods Thirteen consecutive participants with nonacute midportion Achilles tendinopathy and 13 healthy controls were enrolled. Two-point discrimination thresholds over the affected Achilles tendon, unaffected tendon, and tendon of healthy controls were evaluated. Independent and dependent t tests were used to compare group means. Results Two-point discrimination distance over the affected limb in participants with Achilles tendinopathy was significantly increased when compared to the unaffected limb (mean difference, 11.7 mm; 95% confidence interval [CI]: 1.9, 21.5; P = .02) and to healthy controls (mean difference, 13.1 mm; 95% CI: 1.6, 24.6; P = .03). There was no significant difference between the healthy controls and the unaffected side in people with Achilles tendinopathy (mean difference, 1.4 mm; 95% CI: -7.9, 5.1; P = .66). Conclusion These data provide the first evidence of reduced 2-point discrimination over the affected tendon in patients with Achilles tendinopathy. Further research is needed to determine the cause for the change in tactile acuity. J Orthop Sports Phys Ther 2016;46(12):1061-1064. Epub 30 Oct 2016. doi:10.2519/jospt.2016.6514.

  13. Fire and collapse, Faculty of Architecture building, Delft University of Technology: Data collection and preliminary analyses

    NARCIS (Netherlands)

    Meacham, B.; Park, H.; Engelhardt, M.; Kirk, A.; Kodur, V.; Straalen, IJ.J.; Maljaars, J.; Weeren, K. van; Feijter, R. de; Both, K.

    2010-01-01

    On the morning of May 13, 2008, a fire that started in a coffee vending machine on the 6th floor of the 13-story Faculty of Architecture Building at the Delft University of Technology (TUD), Delft, the Netherlands, quickly developed into an extreme loading event. Although all building occupants evac

  14. Integrating the Schoolhouse and the Marketplace: A Preliminary Assessment of the Emerging Role of Electronic Technology.

    Science.gov (United States)

    Molnar, Alex

    This paper focuses on how, by reinforcing and exploiting the emphasis on electronic technologies in school reform, marketers are integrating school children into the advertising and marketing system. The ZapMe! program is a for-profit venture that proposes to derive its profits from activities that link the academic activities of schools and the…

  15. The preliminary conceptions, the traditional resources and digital technologies in teaching of astronomy

    Science.gov (United States)

    de Macedo, J. A.; Voelzke, M. R.

    2014-07-01

    Despite being part of the official documents astronomy is rarely taught adequately in basic education. Digital technologies are commonly used by youth, but neglected by the majority of teachers. In this sense, a survey with the aim of pointing out the potential use of digital technologies in teaching astronomy was developed. An advanced course in astronomy was offered for participants with the goal to make them understand astronomical phenomena. The following steps were to be taken: i) analysis of the pedagogical projects (PPC) of the licenciates at the Federal Institution of the North of Minas Gerais (IFNMG); ii) analysis of students' preconceptions about astronomy and digital technologies; iii) preparation of the course; iv) application of the education proposal. The test consisted of thirty-two students of physics, mathematics and biology and was conducted with the qualitative and quantitative methodology, combined with a content analysis. The results indicated that in the IFNMG only the licenciate-course in physics includes astronomy content diluted in various subjects of the curriculum; the rates of students' prior knowledge in relation to astronomy was low; an evidence of meaningfull earning of the concepts related to astronomy, and of viability of resource use involving digital technologies in the Teaching of astronomy.

  16. A Preliminary Evaluation of Short Blended Online Training Workshop for TPACK Development Using Technology Acceptance Model

    Science.gov (United States)

    Alsofyani, Mohammed Modeef; Aris, Baharuddin bin; Eynon, Rebecca; Majid, Norazman Abdul

    2012-01-01

    The use of Short Blended Online Training (SBOT) for the development of Technological Pedagogical and Content Knowledge (TPACK) is a promising approach to facilitate the use of e-learning by academics. Adult learners prefer the blend of pedagogies such as the presentation, demonstration, practice and feedback if they are structured and…

  17. Fire and collapse, Faculty of Architecture building, Delft University of Technology: Data collection and preliminary analyses

    NARCIS (Netherlands)

    Meacham, B.; Park, H.; Engelhardt, M.; Kirk, A.; Kodur, V.; Straalen, IJ.J.; Maljaars, J.; Weeren, K. van; Feijter, R. de; Both, K.

    2010-01-01

    On the morning of May 13, 2008, a fire that started in a coffee vending machine on the 6th floor of the 13-story Faculty of Architecture Building at the Delft University of Technology (TUD), Delft, the Netherlands, quickly developed into an extreme loading event. Although all building occupants

  18. Mindfulness Therapy for Maladaptive Interpersonal Dependency: A Preliminary Randomized Controlled Trial.

    Science.gov (United States)

    McClintock, Andrew S; Anderson, Timothy; Cranston, Saryn

    2015-11-01

    Existing treatments for maladaptive interpersonal dependency and dependent personality disorder do not meet basic scientific standards for effectiveness. The present investigation tested the efficacy of a mindfulness-based approach: mindfulness therapy for maladaptive interpersonal dependency (MT-MID). Forty-eight participants who reported consistently high levels of maladaptive dependency (i.e., scored higher than 1 standard deviation above the mean on the Interpersonal Dependency Inventory at two separate assessments) were randomized to either 5 sessions of MT-MID or a minimal contact control. Five self-reported outcomes (mindfulness, maladaptive interpersonal dependency, helplessness, fears of negative evaluation, and excessive reassurance seeking) were assessed at pretreatment, posttreatment, and a 4-week follow-up. Intent-to-treat analyses indicated that MT-MID yielded greater improvements than the control on all 5 outcomes at posttreatment (median d=1.61) and follow-up (median d=1.51). Participants assigned to MT-MID were more likely than control participants to meet criteria for clinically significant change at posttreatment (56.5% vs. 0%) and follow-up (42.9% vs. 0%). There was also evidence that increases in mindfulness mediated the dependency-related improvements. These results provide preliminary support for the efficacy of a mindfulness-based approach for treating the symptoms of maladaptive dependency.

  19. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  20. Preliminary investigation of force-reduced superconducting magnet configurations for advanced technology applications

    Energy Technology Data Exchange (ETDEWEB)

    Bouillard, J.X.

    1992-12-01

    The feasibility of new high-field low specific weight superconducting magnet designs using force-free fields is being explored analytically and numerically. This report attempts to assess the technical viability of force-free field concepts to produce high-field, low specific weight and large bore volume magnets, which could promote the use of high temperature superconductors. Several force-free/force-reduced magnet configurations are first reviewed, then discussed and assessed. Force-free magnetic fields, fields for which the current flows parallel to the field, have well-known mathematical solutions extending upon infinite domains. These solutions, however, are no longer force-free everywhere for finite geometries. In this preliminary study, force-free solutions such as the Lundquist solutions truncated to a size where the internal field of the coil matches an externally cylindrical magnetic field (also called a Lundquist coil) are numerically modeled and explored. Significant force-reduction for such coils was calculated, which may have some importance for the design of lighter toroidal magnets used in thermonuclear fusion power generation, superconducting magnetic energy storage (SMES), and mobile MHD power generation and propulsion.

  1. Euler technology assessment for preliminary aircraft design employing OVERFLOW code with multiblock structured-grid method

    Science.gov (United States)

    Treiber, David A.; Muilenburg, Dennis A.

    1995-01-01

    The viability of applying a state-of-the-art Euler code to calculate the aerodynamic forces and moments through maximum lift coefficient for a generic sharp-edge configuration is assessed. The OVERFLOW code, a method employing overset (Chimera) grids, was used to conduct mesh refinement studies, a wind-tunnel wall sensitivity study, and a 22-run computational matrix of flow conditions, including sideslip runs and geometry variations. The subject configuration was a generic wing-body-tail geometry with chined forebody, swept wing leading-edge, and deflected part-span leading-edge flap. The analysis showed that the Euler method is adequate for capturing some of the non-linear aerodynamic effects resulting from leading-edge and forebody vortices produced at high angle-of-attack through C(sub Lmax). Computed forces and moments, as well as surface pressures, match well enough useful preliminary design information to be extracted. Vortex burst effects and vortex interactions with the configuration are also investigated.

  2. New technologies and new performances of the JCMT radio-telescope: a preliminary design study

    Science.gov (United States)

    Mian, S.; De Lorenzi, S.; Ghedin, L.; Rampini, F.; Marchiori, G.; Craig, S.

    2012-09-01

    With a diameter of 15m the James Clerk Maxwell Telescope (JCMT) is the largest astronomical telescope in the world designed specifically to operate in the submillimeter wavelength region of the spectrum. It is situated close to the summit of Mauna Kea, Hawaii, at an altitude of 4092m. Its primary reflector currently consists of a steel geodesic supporting structure and pressed aluminium panels on a passive mount. The major issues of the present reflector are its thermal stability and its panels deterioration. A preliminary design study for the replacement of the JCMT antenna dish is here presented. The requested shape error for the new reflector is antenna performance in terms of both stiffness and thermal stability, so that the required surface accuracy of the primary can be achieved even by adopting a passive panels system. Moreover thanks to CFRP, a considerable weight reduction of the elevation structure can be attained. The performance of the proposed solution for the JCMT antenna has been investigated through FE analyses and the assessed deformation of the structure under different loading cases has been taken into account for subsequent error budgeting. Results show that the proposed solution is in line with the requested performance. With this new backing structure, the JCMT would have the largest CFRP reflector ever built.

  3. Designing assisted living technologies ‘in the wild’: preliminary experiences with cultural probe methodology

    Directory of Open Access Journals (Sweden)

    Wherton Joseph

    2012-12-01

    Full Text Available Abstract Background There is growing interest in assisted living technologies to support independence at home. Such technologies should ideally be designed ‘in the wild’ i.e. taking account of how real people live in real homes and communities. The ATHENE (Assistive Technologies for Healthy Living in Elders: Needs Assessment by Ethnography project seeks to illuminate the living needs of older people and facilitate the co-production with older people of technologies and services. This paper describes the development of a cultural probe tool produced as part of the ATHENE project and how it was used to support home visit interviews with elders with a range of ethnic and social backgrounds, family circumstances, health conditions and assisted living needs. Method Thirty one people aged 60 to 98 were visited in their homes on three occasions. Following an initial interview, participants were given a set of cultural probe materials, including a digital camera and the ‘Home and Life Scrapbook’ to complete in their own time for one week. Activities within the Home and Life Scrapbook included maps (indicating their relationships to people, places and objects, lists (e.g. likes, dislikes, things they were concerned about, things they were comfortable with, wishes (things they wanted to change or improve, body outline (indicating symptoms or impairments, home plan (room layouts of their homes to indicate spaces and objects used and a diary. After one week, the researcher and participant reviewed any digital photos taken and the content of the Home and Life Scrapbook as part of the home visit interview. Findings The cultural probe facilitated collection of visual, narrative and material data by older people, and appeared to generate high levels of engagement from some participants. However, others used the probe minimally or not at all for various reasons including limited literacy, physical problems (e.g. holding a pen, lack of time or energy

  4. Development of radioisotope tracer technology and nucleonic control system

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee and others

    1999-04-01

    The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and basic technology of nuclear control systems that are widely used for automation of industrial plants, and to build a strong tracer group to support the local industries. In relation to the tracer technology, the data acquisition system, the column scanning equipment and the detection pig for a leakage test have been developed. In order to use in analyzing data of tracer experiments, a computer program for the analysis of residence time distribution has been created as well. These results were utilized in developing the tracer technologies, such as the column scanning, the flow measurement using the dilution method, the simultaneous monitoring rotational movement of piston rings and the optimization of a waste water treatment facility, and the technologies were successfully demonstrated in the local industrial. The stripper of RFCC reactor has been examined to find an unwanted structure in it by imminent request from the industry. Related to the development of nucleonic control system, the state of art report on the technology has been written and an equipment for the analysis of asphalt content has been developed. (author)

  5. Applying Distributed Object Technology to Distributed Embedded Control Systems

    DEFF Research Database (Denmark)

    Jørgensen, Bo Nørregaard; Dalgaard, Lars

    2012-01-01

    In this paper, we describe our Java RMI inspired Object Request Broker architecture MicroRMI for use with networked embedded devices. MicroRMI relieves the software developer from the tedious and error-prone job of writing communication protocols for interacting with such embedded devices. MicroR...... in developing control systems for distributed embedded platforms possessing severe resource restrictions.......RMI supports easy integration of high-level application specific control logic with low-level device specific control logic. Our experience from applying MicroRMI in the context of a distributed robotics control application, clearly demonstrates that it is feasible to use distributed object technology...

  6. Group Cognitive Behavioural Therapy and Group Recreational Activity for Adults with Autism Spectrum Disorders: A Preliminary Randomized Controlled Trial

    Science.gov (United States)

    Hesselmark, Eva; Plenty, Stephanie; Bejerot, Susanne

    2014-01-01

    Although adults with autism spectrum disorder are an increasingly identified patient population, few treatment options are available. This "preliminary" randomized controlled open trial with a parallel design developed two group interventions for adults with autism spectrum disorders and intelligence within the normal range: cognitive…

  7. Group Cognitive Behavioural Therapy and Group Recreational Activity for Adults with Autism Spectrum Disorders: A Preliminary Randomized Controlled Trial

    Science.gov (United States)

    Hesselmark, Eva; Plenty, Stephanie; Bejerot, Susanne

    2014-01-01

    Although adults with autism spectrum disorder are an increasingly identified patient population, few treatment options are available. This "preliminary" randomized controlled open trial with a parallel design developed two group interventions for adults with autism spectrum disorders and intelligence within the normal range: cognitive…

  8. Preliminary Findings of Inflight Icing Field Test to Support Icing Remote Sensing Technology Assessment

    Science.gov (United States)

    King, Michael; Reehorst, Andrew; Serke, Dave

    2015-01-01

    NASA and the National Center for Atmospheric Research have developed an icing remote sensing technology that has demonstrated skill at detecting and classifying icing hazards in a vertical column above an instrumented ground station. This technology has recently been extended to provide volumetric coverage surrounding an airport. Building on the existing vertical pointing system, the new method for providing volumetric coverage will utilize a vertical pointing cloud radar, a multifrequency microwave radiometer with azimuth and elevation pointing, and a NEXRAD radar. The new terminal area icing remote sensing system processes the data streams from these instruments to derive temperature, liquid water content, and cloud droplet size for each examined point in space. These data are then combined to ultimately provide icing hazard classification along defined approach paths into an airport.

  9. Intelligent control technology for deep drawing of sheet metal

    Institute of Scientific and Technical Information of China (English)

    钱志平; 马瑞; 赵军; 杨嵩

    2008-01-01

    The intelligent press forming of sheet metal is a completely new and comprehensive technology that combines control-science, computer science, material science and metal forming theory. Although the technology originated in 1980s from America, it was focused on the spring-back of V-shaped bending. Not until 1990s was some pioneering research conducted on the intellectualized control of cup-deep drawing. The research field is expanded to the axis-symmetric part and non-axis symmetric part. After a series of theoretical and experimental research, an intellectualized control system on the deep drawing processing of sheet metal is developed. The common general feature of sheet metal on the process of deep drawing is analyzed and a completely mechanical model is concluded and the deep drawing intellectualized control of sheet metal is finally realized.

  10. Investment and emission control under technology and pollution externalities

    Energy Technology Data Exchange (ETDEWEB)

    Heal, Geoffrey [Graduate School of Business, Columbia University, 616 Uris Hall, New York, NY 10027 (United States); Tarui, Nori [Department of Economics, University of Hawaii at Manoa, 2424 Maile Way, Honolulu, HI 96822 (United States)

    2010-01-15

    This paper studies incentives to develop advanced pollution abatement technology when technology may spillover across agents and pollution abatement is a public good. We are motivated by a variety of pollution control issues where solutions require the development and implementation of new pollution abatement technologies. We show that at the Nash equilibrium of a simultaneous-move game with R and D investment and emission abatement, whether the free rider effect prevails and under-investment and excess emissions occur depends on the degree of technology spillovers and the effect of R and D on the marginal abatement costs. There are cases in which, contrary to conventional wisdom, Nash equilibrium investments in emissions reductions exceed the first-best case. (author)

  11. Information Security / 2002 Command & Control Research & Technology Symposium

    OpenAIRE

    Buddenberg, Rex

    2002-01-01

    Approved for public display, distribution unlimited 2002 Command & Control Research & Technology Symposium, Naval Postgraduate School, Code IS/Bu, Monterey,CA,93943 Security in information systems is a complex problem. Single solutions to complex problems don't exist and matching the appropriate solution (or more accurately, a set of solutions) to a requirement is necessary.

  12. Proportional control valves integrated in silicon nitride surface channel technology

    NARCIS (Netherlands)

    Groen, Maarten S.; Groenesteijn, Jarno; Meutstege, Esken; Brookhuis, Robert A.; Brouwer, Dannis M.; Lötters, Joost C.; Wiegerink, Remco J.

    2015-01-01

    We have designed and realized two types of proportional microcontrol valves in a silicon nitride surface channel technology process. This enables on-die integration of flow controllers with other surface channel devices, such as pressure sensors or thermal or Coriolis-based (mass) flow sensors, to o

  13. Overview on Treatment and Control Technology for Water Eutrophication

    Institute of Scientific and Technical Information of China (English)

    Anfeng; LI; Tao; PAN; Chong; YANG; Xiang; HU; Jianping; LIU; Chengxi; WU

    2013-01-01

    Eutrophication is one of the important reasons for water pollution and is also the problem for water pollution treatment at home and abroad. This article takes an overview on various technical methods and their characteristics applicable for treatment and control of water eutrophication from the aspects of physics, chemistry, biochemistry and environmental factors regulation, and discusses the application and development trend for relevant technologies.

  14. ENGINEERING SUPPORT PARADIGM OF SUBJECT-ORIENTED CONTROL TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Kharitonov V. A.

    2015-10-01

    Full Text Available The article presents the basic antilogy, which is attributed to forming an engineering support paradigm of new technologies related to the subject-oriented control in the noosphere, between the demand for an automatical creative thinking of a control subject and the vigilance of society to possible adverse effects of its subjective activities. It is stated that the noosphere, which showed miracles of automation and cybernation, covers all types of human activities, excluding above original positions, which they barely touched. Uppermost it is related to the central economics problem (economy management – the choice. The problem how to build an engineering support paradigm of subject-oriented control technologies is analyzed; it is based on the known subject-oriented control concept supplemented by concept-based models of the intuition mechanism, which assume its modeling based on formal systems with the purpose to automate control subjects mental activity. From the standpoint of Schopenhauer’s cognitive theory, a research method is developed to investigate evolution and becoming of a particular human category – engineers, which are responsible for the steady development of noosphere of Vernadsky. As a basis, a dynamic phylogenesis model of engineer’s figure was taken, including ready and effective vectors with parameters (education, intellect, skills and (prevision, choice, emergence, respectively. The results of ontogenesis modeling are given – regularities in future engineers’ preparation as a platform for quantization and convolution of its levels based on modern mathematical methods, including those for support engineers of subjectoriented control technologies

  15. Secure Microprocessor-Controlled Prosthetic Leg for Elderly Amputees: Preliminary Results

    Directory of Open Access Journals (Sweden)

    S. Krut

    2011-01-01

    Full Text Available We introduce a new prosthetic leg design, adapted to elderly trans-femoral amputees. Technical progress in prosthesis design mainly concerns active individuals. An important number of elderly amputees are not very mobile, tire easily, present reduced muscle strength, and have difficulties managing their balance. Therefore, the needs and characteristics of this specific population are very different from those of younger ones and the prosthetic solutions are not adapted. Our artificial knee has been designed to fulfill the specific requirements of this population in terms of capabilities, transfer assistance, security, intuitiveness, simplicity of use, and types of physical activity to be performed. We particularly focused our efforts on ensuring safe and secure stand-to-sit transfers. We developed an approach to control the different states of the prosthetic joint (blocked, free, resistant, associated with different physical activities. Amputee posture and motion are observed through a single multi-axis force sensor embedded in the prosthesis. The patient behaves naturally, while the controller analyses his movements in order to detect his intention to sit down. The detection algorithm is based on a reference pattern, calibrated individually, to which the sensor data are compared, and submitted to a set of tests allowing the discrimination of the intention to sit down from other activities. Preliminary validation of the system has been performed in order to verify the applicability of the prosthesis to different tasks: walking, standing, sitting down, standing up, picking up an object from a chair, slope and stair climbing.

  16. 40 CFR 51.912 - What requirements apply for reasonably available control technology (RACT) and reasonably...

    Science.gov (United States)

    2010-07-01

    ... available control technology (RACT) and reasonably available control measures (RACM) under the 8-hour NAAQS... PROGRAMS REQUIREMENTS FOR PREPARATION, ADOPTION, AND SUBMITTAL OF IMPLEMENTATION PLANS Provisions for... reasonably available control technology (RACT) and reasonably available control measures (RACM) under the...

  17. Disruptive Technology for Vector Control: the Innovative Vector Control Consortium and the US Military Join Forces to Explore Transformative Insecticide Application Technology for Mosquito Control Programmes

    Science.gov (United States)

    2015-09-26

    Control Consortium and the US Military join forces to explore transformative insecticide application technology for  mosquito control programmes...opment of new insecticides to fight growing mosquito resistance to the current chemicals [6]. However, it is essential to match the next generation of...technological advancements made in recent decades to modernize the tools used to target, control, and monitor mosquito populations. This paper summarizes the

  18. Adapting Wireless Technology to Lighting Control and Environmental Sensing

    Energy Technology Data Exchange (ETDEWEB)

    Dana Teasdale; Francis Rubinstein; Dave Watson; Steve Purdy

    2005-10-01

    The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired system for

  19. Integration of advanced teleoperation technologies for control of space robots

    Science.gov (United States)

    Stagnaro, Michael J.

    1993-01-01

    Teleoperated robots require one or more humans to control actuators, mechanisms, and other robot equipment given feedback from onboard sensors. To accomplish this task, the human or humans require some form of control station. Desirable features of such a control station include operation by a single human, comfort, and natural human interfaces (visual, audio, motion, tactile, etc.). These interfaces should work to maximize performance of the human/robot system by streamlining the link between human brain and robot equipment. This paper describes development of a control station testbed with the characteristics described above. Initially, this testbed will be used to control two teleoperated robots. Features of the robots include anthropomorphic mechanisms, slaving to the testbed, and delivery of sensory feedback to the testbed. The testbed will make use of technologies such as helmet mounted displays, voice recognition, and exoskeleton masters. It will allow tor integration and testing of emerging telepresence technologies along with techniques for coping with control link time delays. Systems developed from this testbed could be applied to ground control of space based robots. During man-tended operations, the Space Station Freedom may benefit from ground control of IVA or EVA robots with science or maintenance tasks. Planetary exploration may also find advanced teleoperation systems to be very useful.

  20. Performance adaptive training control strategy for recovering wrist movements in stroke patients: a preliminary, feasibility study

    Directory of Open Access Journals (Sweden)

    Sandini Giulio

    2009-12-01

    Full Text Available Abstract Background In the last two decades robot training in neuromotor rehabilitation was mainly focused on shoulder-elbow movements. Few devices were designed and clinically tested for training coordinated movements of the wrist, which are crucial for achieving even the basic level of motor competence that is necessary for carrying out ADLs (activities of daily life. Moreover, most systems of robot therapy use point-to-point reaching movements which tend to emphasize the pathological tendency of stroke patients to break down goal-directed movements into a number of jerky sub-movements. For this reason we designed a wrist robot with a range of motion comparable to that of normal subjects and implemented a self-adapting training protocol for tracking smoothly moving targets in order to facilitate the emergence of smoothness in the motor control patterns and maximize the recovery of the normal RoM (range of motion of the different DoFs (degrees of Freedom. Methods The IIT-wrist robot is a 3 DoFs light exoskeleton device, with direct-drive of each DoF and a human-like range of motion for Flexion/Extension (FE, Abduction/Adduction (AA and Pronation/Supination (PS. Subjects were asked to track a variable-frequency oscillating target using only one wrist DoF at time, in such a way to carry out a progressive splinting therapy. The RoM of each DoF was angularly scanned in a staircase-like fashion, from the "easier" to the "more difficult" angular position. An Adaptive Controller evaluated online performance parameters and modulated both the assistance and the difficulty of the task in order to facilitate smoother and more precise motor command patterns. Results Three stroke subjects volunteered to participate in a preliminary test session aimed at verify the acceptability of the device and the feasibility of the designed protocol. All of them were able to perform the required task. The wrist active RoM of motion was evaluated for each patient at the

  1. Preliminary Weight Savings Estimate for a Commercial Transport Wing Using Rod-Stiffened Stitched Composite Technology

    Science.gov (United States)

    Lovejoy, Andrew E.

    2015-01-01

    A structural concept called pultruded rod stitched efficient unitized structure (PRSEUS) was developed by the Boeing Company to address the complex structural design aspects associated with a pressurized hybrid wing body (HWB) aircraft configuration. While PRSEUS was an enabling technology for the pressurized HWB structure, limited investigation of PRSEUS for other aircraft structures, such as circular fuselages and wings, has been done. Therefore, a study was undertaken to investigate the potential weight savings afforded by using the PRSEUS concept for a commercial transport wing. The study applied PRSEUS to the Advanced Subsonic Technology (AST) Program composite semi-span test article, which was sized using three load cases. The initial PRSEUS design was developed by matching cross-sectional stiffnesses for each stringer/skin combination within the wing covers, then the design was modified to ensure that the PRSEUS design satisfied the design criteria. It was found that the PRSEUS wing design exhibited weight savings over the blade-stiffened composite AST Program wing of nearly 9%, and a weight savings of 49% and 29% for the lower and upper covers, respectively, compared to an equivalent metallic wing.

  2. Robot Control System based on Web Application and RFID Technology

    Directory of Open Access Journals (Sweden)

    Barenji Ali Vatankhah

    2015-01-01

    Full Text Available This paper discusses an integration driven framework for enabling the RFID based identification of parts to perform robotic distributor operations in the random mix based parts control based on web application. The RFID technology senses newly arriving parts to be distribution robot, the robot is able to recognize them and perform cooperative distributing via web-based application. The developed web application control system is implemented in the educational robotic arm. RFID system sends real time information from parts to the web application and web based application makes a decision for control of the robot arm, controller of robot controls the robot as based on the decision from web application. The proposed control system has increases the reconfiguration and scalability of robot system.

  3. Coal surface control for advanced physical fine coal cleaning technologies

    Energy Technology Data Exchange (ETDEWEB)

    Morsi, B.I.; Chiang, S.H.; Sharkey, A.; Blachere, J.; Klinzing, G.; Araujo, G.; Cheng, Y.S.; Gray, R.; Streeter, R.; Bi, H.; Campbell, P.; Chiarlli, P.; Ciocco, M.; Hittle, L.; Kim, S.; Kim, Y.; Perez, L.; Venkatadri, R.

    1992-01-01

    This final report presents the research work carried out on the Coal Surface Control for Advanced Physical Fine Coal Cleaning Technologies project, sponsored by the US Department of Energy, Pittsburgh Energy Technology Center (DOE/PETC). The project was to support the engineering development of the selective agglomeration technology in order to reduce the sulfur content of US coals for controlling SO[sub 2] emissions (i.e., acid rain precursors). The overall effort was a part of the DOE/PETCs Acid Rain Control Initiative (ARCI). The overall objective of the project is to develop techniques for coal surface control prior to the advanced physical fine coal cleaning process of selective agglomeration in order to achieve 85% pyrite sulfur rejection at an energy recovery greater than 85% based on run-of-mine coal. The surface control is meant to encompass surface modification during grinding and laboratory beneficiation testing. The project includes the following tasks: Project planning; methods for analysis of samples; development of standard beneficiation test; grinding studies; modification of particle surface; and exploratory R D and support. The coal samples used in this project include three base coals, Upper Freeport - Indiana County, PA, Pittsburgh NO. 8 - Belmont County, OH, and Illinois No. 6 - Randolph County, IL, and three additional coals, Upper Freeport - Grant County- WV, Kentucky No. 9 Hopkins County, KY, and Wyodak - Campbell County, WY. A total of 149 drums of coal were received.

  4. KEY TECHNOLOGY IN INTELLIGENT CONTROL FOR SHEET METAL DEEP DRAWING

    Institute of Scientific and Technical Information of China (English)

    罗亚军; 赵军; 何丹农; 张永清

    2001-01-01

    Intellectualization of sheet metal in deep drawing is a new combined technology, which is concerned with control science and computer science and sheet metal forming theory. The intelligent control system for sheet metal deep drawing consists of four fundamental factors: real-time measurement, identification, prediction and control. Real-time identification of material properties and friction coefficient is the most important factor in the whole system. An artificial neural network model for identification of the material properties and friction coefficient was established according to deep drawing characteristics and more automation. The identification of the material properties and friction coefficient was realized.

  5. Impact of active controls technology on structural integrity

    Science.gov (United States)

    Noll, Thomas; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry

    1991-01-01

    This paper summarizes the findings of The Technical Cooperation Program to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting the loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle. The potential for active controls to adversely affect structural integrity is described, and load predictions obtained using two state-of-the-art analytical methods are given.

  6. Preliminary Design of the Guidance, Navigation, and Control System of the Altair Lunar Lander

    Science.gov (United States)

    Lee, Allan Y.; Ely, Todd; Sostaric, Ronald; Strahan, Alan; Riedel, Joseph E.; Ingham, Mitch; Wincentsen, James; Sarani, Siamak

    2010-01-01

    Guidance, Navigation, and Control (GN&C) is the measurement and control of spacecraft position, velocity, and attitude in support of mission objectives. This paper provides an overview of a preliminary design of the GN&C system of the Lunar Lander Altair. Key functions performed by the GN&C system in various mission phases will first be described. A set of placeholder GN&C sensors that is needed to support these functions is next described. To meet Crew safety requirements, there must be high degrees of redundancy in the selected sensor configuration. Two sets of thrusters, one on the Ascent Module (AM) and the other on the Descent Module (DM), will be used by the GN&C system. The DM thrusters will be used, among other purposes, to perform course correction burns during the Trans-lunar Coast. The AM thrusters will be used, among other purposes, to perform precise angular and translational controls of the ascent module in order to dock the ascent module with Orion. Navigation is the process of measurement and control of the spacecraft's "state" (both the position and velocity vectors of the spacecraft). Tracking data from the Earth-Based Ground System (tracking antennas) as well as data from onboard optical sensors will be used to estimate the vehicle state. A driving navigation requirement is to land Altair on the Moon with a landing accuracy that is better than 1 km (radial 95%). Preliminary performance of the Altair GN&C design, relative to this and other navigation requirements, will be given. Guidance is the onboard process that uses the estimated state vector, crew inputs, and pre-computed reference trajectories to guide both the rotational and the translational motions of the spacecraft during powered flight phases. Design objectives of reference trajectories for various mission phases vary. For example, the reference trajectory for the descent "approach" phase (the last 3-4 minutes before touchdown) will sacrifice fuel utilization efficiency in order to

  7. Preliminary Design of the Guidance, Navigation, and Control System of the Altair Lunar Lander

    Science.gov (United States)

    Lee, Allan Y.; Ely, Todd; Sostaric, Ronald; Strahan, Alan; Riedel, Joseph E.; Ingham, Mitch; Wincentsen, James; Sarani, Siamak

    2010-01-01

    Guidance, Navigation, and Control (GN&C) is the measurement and control of spacecraft position, velocity, and attitude in support of mission objectives. This paper provides an overview of a preliminary design of the GN&C system of the Lunar Lander Altair. Key functions performed by the GN&C system in various mission phases will first be described. A set of placeholder GN&C sensors that is needed to support these functions is next described. To meet Crew safety requirements, there must be high degrees of redundancy in the selected sensor configuration. Two sets of thrusters, one on the Ascent Module (AM) and the other on the Descent Module (DM), will be used by the GN&C system. The DM thrusters will be used, among other purposes, to perform course correction burns during the Trans-lunar Coast. The AM thrusters will be used, among other purposes, to perform precise angular and translational controls of the ascent module in order to dock the ascent module with Orion. Navigation is the process of measurement and control of the spacecraft's "state" (both the position and velocity vectors of the spacecraft). Tracking data from the Earth-Based Ground System (tracking antennas) as well as data from onboard optical sensors will be used to estimate the vehicle state. A driving navigation requirement is to land Altair on the Moon with a landing accuracy that is better than 1 km (radial 95%). Preliminary performance of the Altair GN&C design, relative to this and other navigation requirements, will be given. Guidance is the onboard process that uses the estimated state vector, crew inputs, and pre-computed reference trajectories to guide both the rotational and the translational motions of the spacecraft during powered flight phases. Design objectives of reference trajectories for various mission phases vary. For example, the reference trajectory for the descent "approach" phase (the last 3-4 minutes before touchdown) will sacrifice fuel utilization efficiency in order to

  8. Inlet Flow Control and Prediction Technologies for Embedded Propulsion Systems

    Science.gov (United States)

    McMillan, Michelle L.; Mackie, Scott A.; Gissen, Abe; Vukasinovic, Bojan; Lakebrink, Matthew T.; Glezer, Ari; Mani, Mori; Mace, James L.

    2011-01-01

    Fail-safe, hybrid, flow control (HFC) is a promising technology for meeting high-speed cruise efficiency, low-noise signature, and reduced fuel-burn goals for future, Hybrid-Wing-Body (HWB) aircraft with embedded engines. This report details the development of HFC technology that enables improved inlet performance in HWB vehicles with highly integrated inlets and embedded engines without adversely affecting vehicle performance. In addition, new test techniques for evaluating Boundary-Layer-Ingesting (BLI)-inlet flow-control technologies developed and demonstrated through this program are documented, including the ability to generate a BLI-like inlet-entrance flow in a direct-connect, wind-tunnel facility, as well as, the use of D-optimal, statistically designed experiments to optimize test efficiency and enable interpretation of results. Validated improvements in numerical analysis tools and methods accomplished through this program are also documented, including Reynolds-Averaged Navier-Stokes CFD simulations of steady-state flow physics for baseline, BLI-inlet diffuser flow, as well as, that created by flow-control devices. Finally, numerical methods were employed in a ground-breaking attempt to directly simulate dynamic distortion. The advances in inlet technologies and prediction tools will help to meet and exceed "N+2" project goals for future HWB aircraft.

  9. Survey of LWR environmental control technology performance and cost

    Energy Technology Data Exchange (ETDEWEB)

    Heeb, C.M.; Aaberg, R.L.; Cole, B.M.; Engel, R.L.; Kennedy, W.E. Jr.; Lewallen, M.A.

    1980-03-01

    This study attempts to establish a ranking for species that are routinely released to the environment for a projected nuclear power growth scenario. Unlike comparisons made to existing standards, which are subject to frequent revision, the ranking of releases can be used to form a more logical basis for identifying the areas where further development of control technology could be required. This report describes projections of releases for several fuel cycle scenarios, identifies areas where alternative control technologies may be implemented, and discusses the available alternative control technologies. The release factors were used in a computer code system called ENFORM, which calculates the annual release of any species from any part of the LWR nuclear fuel cycle given a projection of installed nuclear generation capacity. This survey of fuel cycle releases was performed for three reprocessing scenarios (stowaway, reprocessing without recycle of Pu and reprocessing with full recycle of U and Pu) for a 100-year period beginning in 1977. The radioactivity releases were ranked on the basis of a relative ranking factor. The relative ranking factor is based on the 100-year summation of the 50-year population dose commitment from an annual release of radioactive effluents. The nonradioactive releases were ranked on the basis of dilution factor. The twenty highest ranking radioactive releases were identified and each of these was analyzed in terms of the basis for calculating the release and a description of the currently employed control method. Alternative control technology is then discussed, along with the available capital and operating cost figures for alternative control methods.

  10. Key Technologies for Decentralized Control Platform with Dynamic Evolution for Railway Transportation System

    Institute of Scientific and Technical Information of China (English)

    Tan Yongdong; GuiXun; Qian Qingquan

    2006-01-01

    Key technologies as well as their principles were discussed for a decentralized control platform capable of dynamic evolution.The primary content includes the automatic decision-making mechanism and the algorithm of the control center migration, the principle and technology of system self-monitoring, the principle and technology of the switch-mode of remote control station, the information transmission technology, and the data consistency technology. These key technologies have shown a series of advanced characteristics for decentralized control platform.

  11. Control and power electronics technology in renewable energy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    As the cut-in point of research on control and power electronics technology used in renewable energy, this paper does not aim to analyze particular theories or tech-nologies in this field, but, instead, is to go back to the fountainhead of the issue to illustrate the essential concepts in this field, which are usually neglected and may become bottle-neck of the research. Research experiences have shown that con-fusion and trouble may be created if researchers do not understand these essential concepts well.

  12. Digital data acquisition and preliminary instrumentation study for the F-16 laminar flow control vehicle

    Science.gov (United States)

    Ostowari, Cyrus

    1992-01-01

    Preliminary studies have shown that maintenance of laminar flow through active boundary-layer control is viable. Current research activity at NASA Langley and NASA Dryden is utilizing the F-16XL-1 research vehicle fitted with a laminar-flow suction glove that is connected to a vacuum manifold in order to create and control laminar flow at supersonic flight speeds. This experimental program has been designed to establish the feasibility of obtaining laminar flow at supersonic speeds with highly swept wing and to provide data for computational fluid dynamics (CFD) code calibration. Flight experiments conducted as supersonic speeds have indicated that it is possible to achieve laminar flow under controlled suction at flight Mach numbers greater than 1. Currently this glove is fitted with a series of pressure belts and flush mounted hot film sensors for the purpose of determining the pressure distributions and the extent of laminar flow region past the stagnation point. The present mode of data acquisition relies on out-dated on board multi-channel FM analogue tape recorder system. At the end of each flight, the analogue data is digitized through a long laborious process and then analyzed. It is proposed to replace this outdated system with an on board state-of-the-art digital data acquisition system capable of a through put rate of up to 1 MegaHertz. The purpose of this study was three-fold: (1) to develop a simple algorithm for acquiring data via 2 analogue-to-digital convertor boards simultaneously (total of 32 channels); (2) to interface hot-film/wire anemometry instrumentation with a PCAT type computer; and (3) to characterize the frequency response of a flush mounted film sensor. A brief description of each of the above tasks along with recommendations are given.

  13. Preliminary design of the Visible Spectro-Polarimeter for the Advanced Technology Solar Telescope

    CERN Document Server

    de Wijn, Alfred G; Nelson, Peter G; Huang, Pei

    2012-01-01

    The Visible Spectro-Polarimeter (ViSP) is one of the first light instruments for the Advanced Technology Solar Telescope (ATST). It is an echelle spectrograph designed to measure three different regions of the solar spectrum in three separate focal planes simultaneously between 380 and 900 nm. It will use the polarimetric capabilities of the ATST to measure the full Stokes parameters across the line profiles. By measuring the polarization in magnetically sensitive spectral lines the magnetic field vector as a function of height in the solar atmosphere can be obtained, along with the associated variation of the thermodynamic properties. The ViSP will have a spatial resolution of 0.04 arcsec over a 2 arcmin field of view (at 600 nm). The minimum spectral resolving power for all the focal planes is 180,000. The spectrograph supports up to 4 diffraction gratings and is fully automated to allow for rapid reconfiguration.

  14. Preliminary needs assessment of mobile technology use for healthcare among homeless veterans

    Science.gov (United States)

    Fix, Gemmae M.; Solomon, Jeffrey L.; Petrakis, Beth Ann; Sawh, Leon; Smelson, David A.

    2015-01-01

    Background. Homeless veterans have complex healthcare needs, but experience many barriers to treatment engagement. While information technologies (IT), especially mobile phones, are used to engage patients in care, little is known about homeless veterans’ IT use. This study examines homeless veterans’ access to and use of IT, attitudes toward health-related IT use, and barriers to IT in the context of homelessness. Methods. Qualitative interviews were conducted with 30 homeless veterans in different housing programs in Boston, MA, ranging from emergency shelters to supportive transitional housing that allow stays of up to 2 years. Interviews were conducted in person, audio recorded and then transcribed. Three researchers coded transcripts. Inductive thematic analysis was used. Results. Most participants (90%) had a mobile phone and were receptive to IT use for health-related communications. A common difficulty communicating with providers was the lack of a stable mailing address. Some participants were using mobile phones to stay in touch with providers. Participants felt mobile-phone calls or text messages could be used to remind patients of appointments, prescription refills, medication taking, and returning for laboratory results. Mobile phone text messaging was seen as convenient, and helped participants stay organized because necessary information was saved in text messages. Some reported concerns about the costs associated with mobile phone use (calls and texting), the potential to be annoyed by too many text messages, and not knowing how to use text messaging. Conclusion. Homeless veterans use IT and welcome its use for health-related purposes. Technology-assisted outreach among this population may lead to improved engagement in care. PMID:26246964

  15. Preliminary needs assessment of mobile technology use for healthcare among homeless veterans

    Directory of Open Access Journals (Sweden)

    D. Keith McInnes

    2015-07-01

    Full Text Available Background. Homeless veterans have complex healthcare needs, but experience many barriers to treatment engagement. While information technologies (IT, especially mobile phones, are used to engage patients in care, little is known about homeless veterans’ IT use. This study examines homeless veterans’ access to and use of IT, attitudes toward health-related IT use, and barriers to IT in the context of homelessness.Methods. Qualitative interviews were conducted with 30 homeless veterans in different housing programs in Boston, MA, ranging from emergency shelters to supportive transitional housing that allow stays of up to 2 years. Interviews were conducted in person, audio recorded and then transcribed. Three researchers coded transcripts. Inductive thematic analysis was used.Results. Most participants (90% had a mobile phone and were receptive to IT use for health-related communications. A common difficulty communicating with providers was the lack of a stable mailing address. Some participants were using mobile phones to stay in touch with providers. Participants felt mobile-phone calls or text messages could be used to remind patients of appointments, prescription refills, medication taking, and returning for laboratory results. Mobile phone text messaging was seen as convenient, and helped participants stay organized because necessary information was saved in text messages. Some reported concerns about the costs associated with mobile phone use (calls and texting, the potential to be annoyed by too many text messages, and not knowing how to use text messaging.Conclusion. Homeless veterans use IT and welcome its use for health-related purposes. Technology-assisted outreach among this population may lead to improved engagement in care.

  16. Preliminary needs assessment of mobile technology use for healthcare among homeless veterans.

    Science.gov (United States)

    McInnes, D Keith; Fix, Gemmae M; Solomon, Jeffrey L; Petrakis, Beth Ann; Sawh, Leon; Smelson, David A

    2015-01-01

    Background. Homeless veterans have complex healthcare needs, but experience many barriers to treatment engagement. While information technologies (IT), especially mobile phones, are used to engage patients in care, little is known about homeless veterans' IT use. This study examines homeless veterans' access to and use of IT, attitudes toward health-related IT use, and barriers to IT in the context of homelessness. Methods. Qualitative interviews were conducted with 30 homeless veterans in different housing programs in Boston, MA, ranging from emergency shelters to supportive transitional housing that allow stays of up to 2 years. Interviews were conducted in person, audio recorded and then transcribed. Three researchers coded transcripts. Inductive thematic analysis was used. Results. Most participants (90%) had a mobile phone and were receptive to IT use for health-related communications. A common difficulty communicating with providers was the lack of a stable mailing address. Some participants were using mobile phones to stay in touch with providers. Participants felt mobile-phone calls or text messages could be used to remind patients of appointments, prescription refills, medication taking, and returning for laboratory results. Mobile phone text messaging was seen as convenient, and helped participants stay organized because necessary information was saved in text messages. Some reported concerns about the costs associated with mobile phone use (calls and texting), the potential to be annoyed by too many text messages, and not knowing how to use text messaging. Conclusion. Homeless veterans use IT and welcome its use for health-related purposes. Technology-assisted outreach among this population may lead to improved engagement in care.

  17. Control Region-mtDNA heterogeneity of Kalimantan false gharial (Tomistoma schiegelii population: a preliminary study

    Directory of Open Access Journals (Sweden)

    Hellen Hellen

    2003-06-01

    Full Text Available The preliminary genetic study on Kalimantan false gharial from the wild was reported. Eleven tail scutes were collected fromeleven individuals that originally consisting of two individuals from Kapuas River, one individual from Sentarum Lake, Jelai River,Mapam River, Perian Lake, and Lamandau River, two individuals from Barito River and three individuals from Mahakam River. PCRamplifying and sequencing 451 nucleotides in average that can be aligned at the same length of control region mitochondrial DNA.Among 11 individuals found eight polymorphic sites that consisted four haplotypes (A, B, C, and D respectively, which is haplotypeA is dominant. Based on phylogenetic tree that constructed by Tamura-Nei parameter, false gharial population in Kalimantan can bedivided into two population groups; there were Central-Eastern Kalimantan population group and Western Kalimantan populationgroup. Based on the hypothesis of landmasses separating between central-eastern Kalimantan and western Kalimantan that known asSchwaner Mountains, the genetic distance D = 1.53% was expected to be equal to 20 million years.

  18. Controlling and Monitoring of Electric Feeders Using GSM Network Technology

    Directory of Open Access Journals (Sweden)

    AHMED Afaz Uddin

    2013-10-01

    Full Text Available The application of computer interfaced controlling devices is increasingly rapidly in modern age. Analogous wired systems are substituted by computer interfaced system alternatives in growingnumber of industries. Such control systems had been developed with complex and critical high-end stuffs. In this paper, we developed an automated system that controls the switching of electric feeder power supply featuring the existing GSM technology. The target is tooperate the device according to a preset sequence of on-off mode for three feeders after a particular time interval and to monitor the running condition. The device sends short message updating the status of every action. It also warns the consumers about load shedding using GSM module via sending message. Controlling the gate pulse of a MOSFET that operates the relay, it executes on-off operation of the circuit breaker of the respective feeders. Since GSM technology is used worldwide for communication, third world countries that are still struggling to meet the power demand can use this technology to operate and monitor the condition of power distribution. To operate the GSM device, AT command of GSM location operation for SIM900 is used. This paper targets to improve the power distribution system in developing countries like India, Bangladesh, Nepal where powercrisis and load shedding is quite a common phenomenon.

  19. Specificity of continuous auditing approach on information technology internal controls

    Directory of Open Access Journals (Sweden)

    Kaćanski Slobodan

    2012-01-01

    Full Text Available Contemporary business world, can not be imagined without the use of information technology in all aspects of business. The use of information technology in manufacturing and non-production companies' activities can greatly facilitate and accelerate the process of operation and control. Because of its complexity, they possess vulnerable areas and provide space for the emergence of accidental and intentional frauds that can significantly materially affect the business decisions made by the companies' management. Implementation of internal controls can greatly reduce the level of errors that can contribute to making the wrong decisions. In order to protect the operating system, the company's management implement an internal audit to periodically examine the fundamental quality of the internal control systems. Since the internal audit, according to its character, only periodically checks quality of internal control systems and information technologies to be reported to the manager, the problem arises in the process of in wrong time reporting the management structures of the business entity. To eliminate this problem, management implements a special approach to internal audit, called continuous auditing.

  20. Developments and advances in emission control technology. SP-1120

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    Automotive emission control is an increasingly complex subject that continues to be of vital importance. Tighter emission standards as well as requirements for increased emission system performance and durability have resulted in ongoing development and continuing advances in emission control technology. A great deal of attention continues to be focused on technologies for emission control during cold-start. Detailed analyses are required to determine fundamental mechanisms which govern emission control under a wide variety of operating conditions. Effects of possible catalyst poisons as well as the mechanical durability of aftertreatment systems are being evaluated. Engine, vehicle, and aftertreatment sensors are being utilized to monitor and ensure emission control performance. Improved analytical techniques are being used to help understand emissions problems and to suggest avenues to solutions. Papers assembled in this volume touch on all of these areas. Catalyst durability papers address issues related to hot vibration testing and catalyst durability based on substrate surface area. A variety of papers related to the chemical composition of fuels address issues such as fuel hydrocarbon and NO conversion in three-way catalysts, fuel composition effects on emissions in urban traffic, and fuel sulfur effects on catalysts and on-board diagnostics (OBD-II) systems. Information useful for understanding the performance of cold-start technologies is described in papers on a numerical method for predicting warm-up characteristics of catalysts systems, axial characterization of warmup and underfloor catalytic converters, and EHC impact on extended soak times. Other approaches for reducing cold-start emissions are addressed in papers on in-cylinder catalysts and the use of intake air oxygen enrichment technology. All papers have been processed separately for inclusion on the database.

  1. Research on DSP-based Asynchronous Motor Control Technology

    Directory of Open Access Journals (Sweden)

    Jun Yao

    2013-05-01

    Full Text Available The Motor in a variety of electrical transmission and position servo system occupies an extremely important position. After the DSP technology being applied to the motor control, the unification of the hardware and the flexibility of the software can be combined. Take the brushless DC motor for example, studied the mathematical model and the structure of the motor control system, also obtained the design scheme of the DSP-based asynchronous motor control system. With TI's 32 bit fixed point DSPTMS320F2812 as the core design of the hardware system, we wrote the system software, debug the motor control system and the results show that the system achieves the expected effect. The results of the research can be applied to brushless DC motor and other motor control, it will have a wide application prospects.

  2. Human lunar mission capabilities using SSTO, ISRU and LOX-augmented NTR technologies: A preliminary assessment

    Science.gov (United States)

    Borowski, Stanley K.

    1995-10-01

    The feasibility of conducting human missions to the Moon is examined assuming the use of three 'high leverage' technologies: (1) a single-stage-to-orbit (SSTO) launch vehicle, (2) 'in-situ' resource utilization (ISRU)--specifically 'lunar-derived' liquid oxygen (LUNOX), and (3) LOX-augmented nuclear thermal rocket (LANTR) propulsion. Lunar transportation system elements consisting of a LANTR-powered lunar transfer vehicle (LTV) and a chemical propulsion lunar landing/Earth return vehicle (LERV) are configured to fit within the 'compact' dimensions of the SSTO cargo bay (diameter: 4.6 m/length: 9.0 m) while satisfying an initial mass in low Earth orbit (IMLEO) limit of approximately 60 t (3 SSTO launches). Using approximately 8 t of LUNOX to 'reoxidize' the LERV for a 'direct return' flight to Earth reduces its size and mass allowing delivery to LEO on a single 20 t SSTO launch. Similarly, the LANTR engine's ability to operate at any oxygen/ hydrogen mixture ratio from 0 to 7 with high specific impulse (approximately 940 to 515 s) is exploited to reduce hydrogen tank volume, thereby improving packaging of the LANTR LTV's 'propulsion' and 'propellant modules'. Expendable and reusable, piloted and cargo missions and vehicle designs are presented along with estimates of LUNOX production required to support the different mission modes. Concluding remarks address the issue of lunar transportation system costs from the launch vehicle perspective.

  3. [Preliminary assessment of the potential of biochar technology in mitigating the greenhouse effect in China].

    Science.gov (United States)

    Jiang, Zhi-Xiang; Zheng, Hao; Li, Feng-Min; Wang, Zhen-Yu

    2013-06-01

    The production of biochar by pyrolysis and its application to soil can sequester the CO2 which was absorbed by plants from atmosphere into soil, in addition it can also bring multiple benefits for agriculture production. On the basis of the available potential survey of the biomass residues from agriculture and forestry section, life cycle assessment was employed to quantify the potential of biochar technology in mitigation of greenhouse gases in our country. The results showed: In China, the amount of available biomass resource was 6.04 x 10(8) t every year and its net greenhouse effect potential was 5.32 x 10(8) t CO(2e) (CO(2e): CO2 equivalent), which was equivalent to 0.88 t CO(2e) for every ton biomass. The greatest of contributor to the total potential was plant carbon sequestration in soil as the form of biochar which accounts for 73.94%, followed by production of renewable energy and its percentage was 23.85%. In summary, production of biochar from agriculture and forestry biomass residues had a significant potential for our country to struggle with the pressure of greenhouse gas emission.

  4. Preliminary study on treatment of waste organic matter from livestock by bacteria-mineral technology

    Institute of Scientific and Technical Information of China (English)

    HE Wenyuan; YANG Haizhen; GU Guowei

    2008-01-01

    The present study dealt with relationships between the degradation and humification process that the organic matter underwent during bacteria-mineral technology.An inverse correlation was found between the protein,lipid,and some of the humification indices considered,suggesting that the humification theory is actually humic substances produced from simple-structured natural organic substrates.Weight-average molecular weight (Mw),number-average molecular weight(Mn),and the ratio Mw/Mn of dissolved organic matters at difierent stages of the process were measured by gel permeation chromatography.The results showed that Mn and Mw increased with reaction time from 352 to 17,191,and from 78,707 to 104,564,respectively.The ratio of Mn/Mw decreased from 223.3 to 6.1.This reflected the growth of the polymerization degree of dissolvable organic matters in the process;furthermore,it indicated the formation of complex molecules (humic substances) from more simple molecules.Bacteria-mineral water(BMW) (the effluent of the process) treatments can exert hormone-like activity for enhanced seed germination of wheat and rice and greatly improved chlorophyll synthesis in wheat and rice leaves.Major polyamines (plant regulators) putrescine,spermidine,and spermine,were found in BMW by a high performance liquid chromatography (HPLC) method,which may explain the hormone-like activity of BMW.

  5. Euler Technology Assessment for Preliminary Aircraft Design: Compressibility Predictions by Employing the Cartesian Unstructured Grid SPLITFLOW Code

    Science.gov (United States)

    Finley, Dennis B.; Karman, Steve L., Jr.

    1996-01-01

    The objective of the second phase of the Euler Technology Assessment program was to evaluate the ability of Euler computational fluid dynamics codes to predict compressible flow effects over a generic fighter wind tunnel model. This portion of the study was conducted by Lockheed Martin Tactical Aircraft Systems, using an in-house Cartesian-grid code called SPLITFLOW. The Cartesian grid technique offers several advantages, including ease of volume grid generation and reduced number of cells compared to other grid schemes. SPLITFLOW also includes grid adaption of the volume grid during the solution to resolve high-gradient regions. The SPLITFLOW code predictions of configuration forces and moments are shown to be adequate for preliminary design, including predictions of sideslip effects and the effects of geometry variations at low and high angles-of-attack. The transonic pressure prediction capabilities of SPLITFLOW are shown to be improved over subsonic comparisons. The time required to generate the results from initial surface data is on the order of several hours, including grid generation, which is compatible with the needs of the design environment.

  6. An analysis of complex multiple-choice science-technology-society items: Methodological development and preliminary results

    Science.gov (United States)

    Vázquez-Alonso, Ángel; Manassero-Mas, María-Antonia; Acevedo-Díaz, José-Antonio

    2006-07-01

    The scarce attention to the assessment and evaluation in science education research has been especially harmful for teaching science-technology-society (STS) issues, due to the dialectical, tentative, value-laden, and polemic nature of most STS topics. This paper tackles the methodological difficulties of the instruments that monitor views related to STS topics and rationalizes a quantitative methodology and an analysis technique to improve the utility of an empirically developed multiple-choice item pool, the Questionnaire of Opinions on STS. This methodology embraces an item-scaling psychometrics based on the judgments by a panel of experts, a multiple response model, a scoring system, and the data analysis. The methodology finally produces normalized attitudinal indices that represent the respondent's reasoned beliefs toward STS statements, the respondent's position on an item that comprises several statements, or the respondent's position on an entire STS topic that encompasses a set of items. Some preliminary results show the methodology's ability to evaluate the STS attitudes in a qualitative and quantitative way and for statistical hypothesis testing. Lastly, some applications for teacher training and STS curriculum development in science classrooms are discussed.

  7. Embedded Web Technology: Internet Technology Applied to Real-Time System Control

    Science.gov (United States)

    Daniele, Carl J.

    1998-01-01

    The NASA Lewis Research Center is developing software tools to bridge the gap between the traditionally non-real-time Internet technology and the real-time, embedded-controls environment for space applications. Internet technology has been expanding at a phenomenal rate. The simple World Wide Web browsers (such as earlier versions of Netscape, Mosaic, and Internet Explorer) that resided on personal computers just a few years ago only enabled users to log into and view a remote computer site. With current browsers, users not only view but also interact with remote sites. In addition, the technology now supports numerous computer platforms (PC's, MAC's, and Unix platforms), thereby providing platform independence.In contrast, the development of software to interact with a microprocessor (embedded controller) that is used to monitor and control a space experiment has generally been a unique development effort. For each experiment, a specific graphical user interface (GUI) has been developed. This procedure works well for a single-user environment. However, the interface for the International Space Station (ISS) Fluids and Combustion Facility will have to enable scientists throughout the world and astronauts onboard the ISS, using different computer platforms, to interact with their experiments in the Fluids and Combustion Facility. Developing a specific GUI for all these users would be cost prohibitive. An innovative solution to this requirement, developed at Lewis, is to use Internet technology, where the general problem of platform independence has already been partially solved, and to leverage this expanding technology as new products are developed. This approach led to the development of the Embedded Web Technology (EWT) program at Lewis, which has the potential to significantly reduce software development costs for both flight and ground software.

  8. Factors controlling short-term soil microbial response after laboratory heating. Preliminary results

    Science.gov (United States)

    Jiménez-Compán, Elizabeth; Jiménez-Morillo, Nicasio; Jordán, Antonio; Bárcenas-Moreno, Gema

    2015-04-01

    Soil microbial response after fire is controlled by numerous variables which conclude with a mosaic of results depending on organic carbon alterations or pH fire-induced changes. This fact has complicated the studies focused on post-fire microbial response, compiling high variability of opposite result in the bibliography. Soil laboratory heating cannot emulate a real wildfire effect on soil but lead us the possibility to control several variables and it is a valid tool to clarify the relative weight of different factors controlling microbial response after soil heating. In this preliminary study different heated treatments were applied to unaltered forest soil samples, obtaining 4 different heating treatments to simulate a range of fire intensities: unaltered-control (UH), and soil heated at 300, 450 and 500 °C. In order to isolate possible nutrient availability or pH heating-induced changes, different culture media were prepared using soil:water extract from each heating treatments and adding different supplements to obtain the total of 11 different culture media: unheated soil without supplements (UH-N-), unheated soil with nutrient supplement (UH-N+), soil heated at 300 °C without supplements (300-N-), soil heated at 300 °C with nutrient supplement (300-N+), soil heated at 300 °C with nutrient supplement and pH-buffered (300-N+pH); soil heated at 450 °C without supplements (450-N-), soil heated at 450 °C with nutrient supplement (450-N+), soil heated at 450 °C with nutrient supplement and pH-buffered (450-N+); soil heated at 500 °C without supplements (500-N-), soil heated at 500 °C with nutrient supplement (500-N+), soil heated at 500 °C with nutrient supplement and pH-buffered (500-N+). Each media was inoculated with different dilutions of a microbial suspension from the original unaltered soil, and the abundance of viable and cultivable microorganisms were measured by plate count method. In addition, the analysis of heating-induced soil organic

  9. Aircraft Loss of Control: Problem Analysis for the Development and Validation of Technology Solutions

    Science.gov (United States)

    Belcastro, Christine M.; Newman, Richard L.; Crider, Dennis A.; Klyde, David H.; Foster, John V.; Groff, Loren

    2016-01-01

    Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes. LOC can result from a wide spectrum of precursors (or hazards), often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and the validation process must provide a means of assessing system effectiveness and coverage of these hazards. This paper provides a detailed description of a methodology for analyzing LOC as a dynamics and control problem for the purpose of developing effective technology solutions. The paper includes a definition of LOC based on several recent publications, a detailed description of a refined LOC accident analysis process that is illustrated via selected example cases, and a description of planned follow-on activities for identifying future potential LOC risks and the development of LOC test scenarios. Some preliminary considerations for LOC of Unmanned Aircraft Systems (UAS) and for their safe integration into the National Airspace System (NAS) are also discussed.

  10. Constitutional and legal implications of arms control verification technologies

    Energy Technology Data Exchange (ETDEWEB)

    Tanzman, E.A.; Haffenden, R.

    1992-09-01

    United States law can both help and hinder the use of instrumentation as a component of arms control verification in this country. It can foster the general use of sophisticated verification technologies, where such devices are consistent with the value attached to privacy by the Fourth Amendment to the United States Constitution. On the other hand, law can hinder reliance on devices that cross this constitutional line, or where such technology itself threatens health, safety, or environment as such threats are defined in federal statutes. The purpose of this conference paper is to explain some of the lessons that have been learned about the relationship between law and verification technologies in the hope that law can help more than hinder. This paper has three parts. In order to start with a common understanding, part I will briefly describe the hierarchy of treaties, the Constitution, federal statutes, and state and local laws. Part 2 will discuss how the specific constitutional requirement that the government respect the right of privacy in all of its endeavors may affect the use of verification technologies. Part 3 will explain the environmental law constraints on verification technology as exemplified by the system of on-site sampling embodied in the current Rolling Text of the Draft Chemical Weapons Convention.

  11. A preliminary assessment of the state of harvest and collection technology for forest residues

    Energy Technology Data Exchange (ETDEWEB)

    Webb, Erin [ORNL; Perlack, Robert D [ORNL; Blackwelder, D. Brad [Idaho National Laboratory (INL); Muth, David J. [Idaho National Laboratory (INL); Hess, J. Richard [Idaho National Laboratory (INL)

    2008-08-01

    To meet the 'Twenty in Ten Initiative' goals set in the 2007 State of the Union address, forest resources will be needed as feedstocks for lignocellulosic ethanol production. It has been estimated that 368 million dry tons can be produced annually in the U.S. from logging residues and fuel treatment thinnings. Currently, very little of this woody biomass is used for energy production due to the costs and difficulty in collecting and transporting this material. However, minimizing biomass costs (including harvest, handling, transport, storage, and processing costs) delivered to the refinery is necessary to develop a sustainable cellulosic ethanol industry. Achieving this goal requires a fresh look at conventional timber harvesting operations to identify ways of efficiently integrating energy wood collection and developing cost-effective technologies to harvest small-diameter trees. In conventional whole-tree logging operations, entire trees are felled and skidded from the stump to the landing. The residues (also called slash), consisting of tops and limbs, accumulate at the landing when trees are delimbed. This slash can be ground at the landing with a mobile grinder or transported to another central location with a stationary grinder. The ground material is transported via chip vans, or possibly large roll on/off containers, to the user facility. Cut-to-length harvesting systems are gaining popularity in some locations. In these operations, specialized harvesters that can fall, delimb, and cut logs to length are used. The small diameter tops and limbs accumulate along the machine's track. It can be left in the forest to dry or removed soon after harvest while logs are extracted. Removing slash during the same operation as the wood has been shown to be more efficient. However, leaving residue in the forest to dry reduces moisture content, which improves grinder performance, reduces dry matter loss during storage, and inhibits colonization of fungi

  12. An Approach to Command and Control Using Emerging Technologies

    Science.gov (United States)

    2013-06-01

    An Approach To Command and Control Using Emerging Technologies ICCRTS – 044 Dan Carpenter Air Force Research Laboratory / RISA ATTN Dan Carpenter... RISA 525 Brookes Rd Rome, NY 13441 (315) 330-7121 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Air Force Research Laboratory / RISA ,525

  13. ADVANCED SULFUR CONTROL CONCEPTS FOR HOT GAS DESULFURIZATION TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1999-04-01

    The objective of this project is to develop a hot-gas desulfurization process scheme for control of H{sub 2}S in HTHP coal gas that can be more simply and economically integrated with known regenerable sorbents in DOE/METC-sponsored work than current leading hot-gas desulfurization technologies. In addition to being more economical, the process scheme to be developed must yield an elemental sulfur byproduct.

  14. ADVANCED SULFUR CONTROL CONCEPTS FOR HOT GAS DESULFURIZATION TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-12-31

    The objective of this project is to develop a hot-gas desulfurization process scheme for control of H{sub 2}S in HTHP coal gas that can be more simply and economically integrated with known regenerable sorbents in DOE/METC-sponsored work than current leading hot-gas desulfurization technologies. In addition to being more economical, the process scheme to be developed must yield an elemental sulfur byproduct.

  15. Preliminary assessment of Tongue Drive System in medium term usage for computer access and wheelchair control.

    Science.gov (United States)

    Yousefi, Behnaz; Huo, Xueliang; Ghovanloo, Maysam

    2011-01-01

    Tongue Drive System (TDS) is a wireless, wearable assistive technology that enables individuals with severe motor impairments access computers, drive wheelchairs, and control their environments using tongue motion. In this paper, we have evaluated the TDS performance as a computer input device using ISO9241-9 standard tasks for pointing and selecting, based on the well known Fitts' Law, and as a powered wheelchair controller through an obstacle course navigation task. Nine able-bodied subjects who already had tongue piercing participated in this trial over 5 sessions during 5 weeks, allowing us to study the TDS learning process and its current limiting factors. Subjects worn tongue rings made of titanium in the form of a barbell with a small rare earth magnetic tracer hermetically sealed inside the upper ball. Comparing the results between 1(st) and 5(th) sessions showed that subjects' performance improved in all the measures through 5 sessions, demonstrating the effects of learning.

  16. A preliminary investigation on the application of robotics to missile fire control

    Science.gov (United States)

    McIngvale, P. H.; Sherrill, A. D.; Herring, J. W.

    1983-11-01

    This report explores the possible applications of artificial intelligence and robotics to Army fire control problems. A candidate robotics system is presented and its development is detailed. The system is a ground Remote Target Acquisition/Designation System which would be developed in stages and would make use of technology existing in HELLFIRE, FOG-M, and other related systems. It is intended to evolve from a relatively simple surveillance and designation system to an essentially autonomous fire control system. It has the advantages of removing the soldier to a less hazardous position, allowing the operator(s) to oversee the operation of many robotic forward observers, and allowing the acquisition and designation of many robotic forward observers, and allowing the acquisition and designation of targets over a wide area. In the latter evolutionary stages, the system should be equipped with weapons and be autonomous or semi-autonomous.

  17. Safety and feasibility of transcranial direct current stimulation in pediatric hemiparesis: randomized controlled preliminary study.

    Science.gov (United States)

    Gillick, Bernadette T; Feyma, Tim; Menk, Jeremiah; Usset, Michelle; Vaith, Amy; Wood, Teddi Jean; Worthington, Rebecca; Krach, Linda E

    2015-03-01

    Transcranial direct current stimulation (tDCS) is a form of noninvasive brain stimulation that has shown improved adult stroke outcomes. Applying tDCS in children with congenital hemiparesis has not yet been explored. The primary objective of this study was to explore the safety and feasibility of single-session tDCS through an adverse events profile and symptom assessment within a double-blind, randomized placebo-controlled preliminary study in children with congenital hemiparesis. A secondary objective was to assess the stability of hand and cognitive function. A double-blind, randomized placebo-controlled pretest/posttest/follow-up study was conducted. The study was conducted in a university pediatric research laboratory. Thirteen children, ages 7 to 18 years, with congenital hemiparesis participated. Adverse events/safety assessment and hand function were measured. Participants were randomly assigned to either an intervention group or a control group, with safety and functional assessments at pretest, at posttest on the same day, and at a 1-week follow-up session. An intervention of 10 minutes of 0.7 mA tDCS was applied to bilateral primary motor cortices. The tDCS intervention was considered safe if there was no individual decline of 25% or group decline of 2 standard deviations for motor evoked potentials (MEPs) and behavioral data and no report of adverse events. No major adverse events were found, including no seizures. Two participants did not complete the study due to lack of MEP and discomfort. For the 11 participants who completed the study, group differences in MEPs and behavioral data did not exceed 2 standard deviations in those who received the tDCS (n=5) and those in the control group (n=6). The study was completed without the need for stopping per medical monitor and biostatisticial analysis. A limitation of the study was the small sample size, with data available for 11 participants. Based on the results of this study, tDCS appears to be safe

  18. Advances in Inertial Measurement Technology for Marine Motion Control

    Directory of Open Access Journals (Sweden)

    Mathias Håndlykken

    1996-01-01

    Full Text Available This paper describes the function of an inertial "strap down" attitude sensor based on solid state Coriolis force rate gyros, accelerometers and magnetic sensor. Performance is analyzed taking into account the typical excitations in attitude and linear motion seen in marine applications. The use is for control of fast crafts, ROV and AUV heading, roll, pitch and heave control. The influence on performance given by utilization of external information from velocity log and more accurate heading devices is also analyzed. Typical performance of this low cost type of technology is shown.

  19. A Voltage Controlled Oscillator using Ring Structure in CMOS Technology

    Directory of Open Access Journals (Sweden)

    Mrs. Devendra Rani

    2012-06-01

    Full Text Available Voltage-Controlled Ring Oscillators are crucial components in many wireless communication systems. The goal of this project is to design a high speed and lower power consumption, a voltage controlled oscillator (VCO, based on ring oscillators in 250nm CMOS technology, which provides a frequency of 2.4GHz. This CMOS based VCO is used for high speed wireless communication applications. A design of VCO includes delay cell, bias circuitry, and tuning circuitry using Tanner 13.0v software.

  20. Experience with ISO quality control in assisted reproductive technology.

    Science.gov (United States)

    Alper, Michael M

    2013-12-01

    Assisted reproductive technology (ART) programs are complex organizations requiring the integration of multiple disciplines. ISO 9001:2008 is a quality management system that is readily adaptable to an ART program. The value that ISO brings to the entire organization includes control of documents, clear delineation of responsibilities of staff members, documentation of the numerous processes and procedures, improvement in tracking and reducing errors, and overall better control of systems. A quality ART program sets quality objectives and monitors their progress. ISO provides a sense of transparency within the organization and clearer understanding of how service is provided to patients. Most importantly, ISO provides the framework to allow for continual improvement.

  1. Control of coupled oscillator networks with application to microgrid technologies.

    Science.gov (United States)

    Skardal, Per Sebastian; Arenas, Alex

    2015-08-01

    The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable synchronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

  2. Adapting Wireless Technology to Lighting Control and Environmental Sensing

    Energy Technology Data Exchange (ETDEWEB)

    Dana Teasdale; Francis Rubinstein; David S. Watson; Steve Purdy

    2006-04-30

    Although advanced lighting control systems offer significant energy savings, the high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output, in addition to 0-24 Volt and 0-10 Volt inputs. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multisensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including open and closed-loop daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the

  3. Technological and life cycle assessment of organics processing odour control technologies.

    Science.gov (United States)

    Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories.

  4. Preventing unauthorized use of firearms by implementing use control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1995-07-01

    A goal among many law enforcement and security professionals, and the National Institute of Justice, is to decrease the risk that an officer or security guard may encounter. One risk that officers confront is unpredictable persons who sometimes try to gain control of the officer`s firearm. The addition of user-recognizing-and-authorizing technologies to a firearm could eliminate the capability of an unauthorized user from firing an officer`s firearm. Sandia National Laboratories has been active in the research and development of nuclear security systems that include access and use control technologies. Sandia is being sponsored by the National Institute of Justice to perform a research and development project to determine the feasibility of a user authorized firearm, or {open_quotes}smart gun.{close_quotes} The focus group for the research is law enforcement officers because of the number of firearm take aways that have occurred in the past and the severe use requirements placed on their firearms. A comprehensive look at the problem of weapon take aways in the United States was conducted using information available from the Federal Bureau of Investigation and other law enforcement sources. An investigation into the end user requirements for smart gun technologies has been completed. During the remainder of the project, the user requirements are being transformed into engineering requirements. which will then be used to evaluate numerous technologies that could be used in a smart gun. Demonstration models will be made of the most promising technologies. Other potential applications are remote enabling and disabling of firearms, transportation of prisoners by corrections officers, military use in operations other than war, and use by private citizens.

  5. Preliminary study of trace element emissions and control during coal combustion

    Institute of Scientific and Technical Information of China (English)

    ZHANG Junying; ZHAO Yongchun; DING Feng; ZENG Hancai; ZHENG Chuguang

    2007-01-01

    Hazardous trace element emissions have caused serious harm to human health in China.Several typical high-toxic trace element coals were collected from different districts and were used to investigate the emission characteristics of toxic trace elements (As,Se,Cr,Hg) and to explore preliminary control methods.Coal combustion tests were conducted in several bench-scale furnaces including drop tube furnace (DTF),circulating fluidized bed (CFB) combustion furnace,and fixed-bed combustion furnace.Calcium oxide was used to control the emission of arsenic and selenium.The granular activated carbons (AC) and activatedcarbon fibers (ACF) were used to remove mercury in the flue gas from coal combustion.The chemical composition and trace element contents of ash and particulate matter (PM)were determined by X-ray fluorescence (XRF) spectrometry and inductively coupled plasma-atomic emission spectrometry (ICP-AES),respectively.The speciation and concentration of mercury were investigated using the Ontario-Hydro method.X-ray diffraction spectrometry (XRD) was used to determine the mineral composition of production during combustion experiments.With the addition of a calciumbased sorbent,arsenic concentration in PM1 sharply decreased from 0.25-0.11 mg/m3.In fixed-bed combustion of coal,the retention rates of selenium volatiles were between 11.6% and 50.7% using lime.In the circulating fluidized-bed combustion of coal,the content of selenium in ash from the chimney was reduced to one-fourth of its original value and that in leaching water from the chimney decreased by two orders of magnitude using lime.Calcium-based sorbent is an effective additive to control the emission of As and Se during coal combustion.The emission of chromium is influenced by the occurrence mode of Cr in coal.Chromium emission in PM2.5 during coal combustion is 55.5 and 34.7 μg/m3 for Shenbei coal and mixed Pingdingshan coal,respectively.The adsorptive capacity of granular activated carbon for Hg0 is

  6. The application of active noise control technology to reduce noise from air pollution control equipment

    Energy Technology Data Exchange (ETDEWEB)

    Depies, C. R.; Kapsos, D. W.

    1996-08-01

    The basic concept of active noise control, i. e. to create a noise field in a space in order to destructively interfere with an existing noise, and in the process create a quieter space, was explained. The manner in which noise control technology can be used in air pollution control equipment was described and guidelines for application were provided. A number of case studies were used to illustrate the suitability of active noise control for low frequency noise problems, especially in the area of air pollution control equipment. Impressive reduction of low frequency noise, energy efficiency, ability to retrofit into an existing duct system, and the hardware`s insensitivity to dirty exhaust environments were cited as the principal reasons for the success of active noise control technology over more traditional in-line passive silencers. 1 ref., 8 figs.

  7. The HVAC Control Technology Making Energy Saving Compatible with Comfort

    Science.gov (United States)

    Takagi, Yasuo; Yonezawa, Kenzo; Murayama, Dai; Nishimura, Nobutaka; Hanada, Yuuichi; Yamazaki, Kenichi

    The new air-conditioning control technology for the energy saving for buildings is proposed. The method is mainly focused on the compatibility of energy savings and comfort. The energy saving is achieved through the next generation air handling unit that controls room humidity without energy loss and the optimal operation of HVAC (Heating, Ventilating and air-conditioning) system, manipulating the supplying airflow temperature to the rooms, room temperature and the humidity. The comfort is kept by the index (PMV: Predicted Mean Vote) that calculated with room temperature, humidity, radiation temperature, wind velocity and so on. In order to find the HVAC system operation conditions that satisfy the comfort and energy saving at the same time, very large-scale nonlinear programming with nonlinear constraints must be solved on real time basis. To make the programming of the system practical, the driving function loaded onto a control computer is introduced. The function is made by the spline interpolation to achieve calculation stable and to adapt to various HVAC operation modes. The effectiveness of the HVAC control technology is proved through a building HVAC data and the simulations using the data.

  8. Environmentally Friendly Coating Technology for Autonomous Corrosion Control

    Science.gov (United States)

    Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Johnsey, Marissa N.; Jolley, Scott T.; Pearman, Benjamin P.; Zhang, Xuejun; Fitzpatrick, Lilliana; Gillis, Mathew; Blanton, Michael; Hanna, Joshua S.; Rawlins, James W.

    2016-01-01

    This work concerns the development of environmentally friendly encapsulation technology, specifically designed to incorporate corrosion indicators, inhibitors, and self-healing agents into a coating, in such a way that the delivery of the indicators and inhibitors is triggered by the corrosion process, and the delivery of self-healing agents is triggered by mechanical damage to the coating. Encapsulation of the active corrosion control ingredients allows the incorporation of desired autonomous corrosion control functions such as: early corrosion detection, hidden corrosion detection, corrosion inhibition, and self-healing of mechanical damage into a coating. The technology offers the versatility needed to include one or several corrosion control functions into the same coating.The development of the encapsulation technology has progressed from the initial proof-of-concept work, in which a corrosion indicator was encapsulated into an oil-core (hydrophobic) microcapsule and shown to be delivered autonomously, under simulated corrosion conditions, to a sophisticated portfolio of micro carriers (organic, inorganic, and hybrid) that can be used to deliver a wide range of active corrosion ingredients at a rate that can be adjusted to offer immediate as well as long-term corrosion control. The micro carriers have been incorporated into different coating formulas to test and optimize the autonomous corrosion detection, inhibition, and self-healing functions of the coatings. This paper provides an overview of progress made to date and highlights recent technical developments, such as improved corrosion detection sensitivity, inhibitor test results in various types of coatings, and highly effective self-healing coatings based on green chemistry.

  9. Integrating the Latest Technologies into a Java Process Control MMI

    CERN Document Server

    Momal, F

    1999-01-01

    The LHC/IAS (equipment control) Group is developing supervisory systems by means of industrial SCADA packages. For the past four years, we have provided Web remote access to the data coming from our supervisory and control systems. Combining our findings, an architecture and a strategy have been set-up for a generic Java interface which offers a remote and unique access to all kinds of control data. Using the object-oriented technology, the architecture dissociates the data access layer from the presentation one. Thus, the interface may be used to access different types of data. The data are stored in the interface together with a set of related information (acquisition date, unit, etc.). The graphical interface is based on components which may be stored independently and which can be accessed on demand. Attention has been given to easing the integration of commercial components. To help non-specialists in creating components, a graphical scripting language has been developed.

  10. Control system by the technological electron Linac KUT-20

    CERN Document Server

    Akchurin, Y I; Gurin, V A; Demidov, N V

    2001-01-01

    The high-power technological electron linac KUT-20 was developed at the Science Research Complex 'Accelerator' of NSC KIPT. The linac consists of two 1.2 m length accelerating structures with a variable geometry and an injector. The latter comprises a diode electron gun,a klystron type buncher and an accelerating cavity.With a RF supply power at accelerating structure entries of 11 MW and with a current at the accelerator exit of 1A,the beam energy will be up to 20 MeV.An average beam power is planned to be 20 kW.All systems of the accelerator are controlled by a computerised control system. The program and technical complex consist of PC equipped with fast ADC control console, synchronization unit, microprocessor-operated complexes.

  11. Alternative control technology document for bakery oven emissions. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sanford, C.W.

    1992-12-01

    The document was produced in response to a request by the baking industry for Federal guidance to assist in providing a more uniform information base for State decision-making with regard to control of bakery oven emissions. The information in the document pertains to bakeries that produce yeast-leavened bread, rolls, buns, and similar products but not crackers, sweet goods, or baked foodstuffs that are not yeast leavened. Information on the baking processes, equipment, operating parameters, potential emissions from baking, and potential emission control options are presented. Catalytic and regenerative oxidation are identified as the most appropriate existing control technologies applicable to VOC emissions from bakery ovens. Cost analyses for catalytic and regenerative oxidation are included. A predictive formula for use in estimating oven emissions has been derived from source tests done in junction with the development of the document. Its use and applicability are described.

  12. Microcontroller Based Home Security and Load Controlling Using Gsm Technology

    Directory of Open Access Journals (Sweden)

    Mustafijur Rahman

    2015-03-01

    Full Text Available "Home automation" referred to as 'Intelligent home' or 'automated home', indicates the automation of daily tasks with electrical devices used in homes. This could be the control of lights or more complex chores such as remote viewing of the house interiors for surveillance purposes. The emerging concept of smart homes offers a comfortable, convenient and safe and secure environment for occupants. These include automatic load controlling, fire detection, temperature sensing, and motion detection and lock system etc. Furthermore it has advanced security compared to other houses and can send a message to the user for action that occur inside his/her house while he/she is away from home. It can also allow a person to control appliances from a remote location by mobile phone using GSM technology.

  13. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  14. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  15. Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters.

    Science.gov (United States)

    Lin, Wei-Shao; Starr, Thomas L; Harris, Bryan T; Zandinejad, Amirali; Morton, Dean

    2013-01-01

    This article describes the preliminary findings of the mechanical properties of functionally graded titanium with controlled distribution of porosity and a reduced Young's modulus on the basis of a computeraided design (CAD) file, using the rapid-prototyping, direct metal laser sintering (DMLS) technique. Sixty specimens of Ti-6Al-4V were created using a DMLS machine (M270) following the standard for tensile testing of metals. One group was fabricated with only 170 W of laser energy to create fully dense specimens (control group). The remaining specimens all featured an outer fully dense "skin" layer and a partially sintered porous inner "core" region. The outer "skin" of each specimen was scanned at 170 W and set at a thickness of 0.35, 1.00, or 1.50 mm for different specimen groups. The inner "core" of each specimen was scanned at a lower laser power (43 or 85 W). The partially sintered core was clearly visible in all specimens, with somewhat greater porosity with the lower laser power. However, the amount of porosity in the core region was not related to the laser power alone; thinner skin layers resulted in higher porosity for the same power values in the core structure. The lowest Young's modulus achieved, 35 GPa, is close to that of bone and was achieved with a laser power of 43 W and a skin thickness of 0.35 mm, producing a core that comprised 74% of the total volume. Additive manufacturing technology may provide an efficient alternative way to fabricate customized dental implants based on a CAD file with a functionally graded structure that may minimize stress shielding and improve the long-term performance of dental implants.

  16. The development of pollution control technology in coal combustion in China

    Institute of Scientific and Technical Information of China (English)

    XU Xuchang; ZHANG Hu; ZHUO Yuqun; TONG Huiling; WANG Shujuan; LI Yan

    2007-01-01

    The recent development of coal combustion pollution control technologies in China,including desulphurization,denitrification,particulate matters and heavy metals emission control technologies,have been reviewed.The development histories and the advantages of China's self-developed technologies have been introduced in detail.The key points of future research and development in coal combustion pollution control,e.g.,combined emission control and CO2 emission control technologies,have also been discussed.

  17. Disruptive technology for vector control: the Innovative Vector Control Consortium and the US Military join forces to explore transformative insecticide application technology for mosquito control programmes.

    Science.gov (United States)

    Knapp, Jennifer; Macdonald, Michael; Malone, David; Hamon, Nicholas; Richardson, Jason H

    2015-09-26

    Malaria vector control technology has remained largely static for decades and there is a pressing need for innovative control tools and methodology to radically improve the quality and efficiency of current vector control practices. This report summarizes a workshop jointly organized by the Innovative Vector Control Consortium (IVCC) and the Armed Forces Pest Management Board (AFPMB) focused on public health pesticide application technology. Three main topics were discussed: the limitations with current tools and techniques used for indoor residual spraying (IRS), technology innovation to improve efficacy of IRS programmes, and truly disruptive application technology beyond IRS. The group identified several opportunities to improve application technology to include: insuring all IRS programmes are using constant flow valves and erosion resistant tips; introducing compression sprayer improvements that help minimize pesticide waste and human error; and moving beyond IRS by embracing the potential for new larval source management techniques and next generation technology such as unmanned "smart" spray systems. The meeting served to lay the foundation for broader collaboration between the IVCC and AFPMB and partners in industry, the World Health Organization, the Bill and Melinda Gates Foundation and others.

  18. Bring Your Own Device Technology: Preliminary Results from a Mixed Methods Study to Explore Student Experience of In-Class Response Systems in Post-Secondary Education

    Directory of Open Access Journals (Sweden)

    Matthew Numer

    2015-02-01

    Full Text Available This research examines the effectiveness of Bring Your Own Device (BYOD technology in a postsecondary classroom. Despite recent advances in the technological tools available to educators, there is a significant gap in the literature regarding student efficacy, engagement and contribution to learning. This paper will present the preliminary findings of the first phases of an evaluation project measuring student interaction with BYOD technology in a large group setting. Employing a mixed methods design, the findings from two focus groups and two online surveys will be discussed. This project involved students in the Winter and Fall 2014 semesters of a fourth year Human Sexuality course which has enrolment of approximately 400 per semester. The findings suggest that BYOD technology contributes to student engagement and participation in the classroom setting. Further, the findings suggest that students are comfortable in using this tool, and perceived the experience as enjoyable.

  19. Intelligent control and automation technology for nuclear application

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Hee; Eom, Heung Sub; Kim, Ko Ryu; Lee, Jae Cheol; Choi, You Rak; Lee, Soo Cheol [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-06-01

    Using recent technologies on a mobile robot and computer science, we developed an automatic inspection system for weld lines of the reactor pressure vessel. The ultrasonic inspection of the reactor pressure vessel is currently performed by commercialized robot manipulators. Since, however, the conventional fixed type robot manipulator is very huge, heavy and expensive, it needs long inspection time and is hard to handle and maintain. In order to resolve these problems, we developed a new inspection automation system using a small mobile robot crawling on the vertical wall. According to the conceptual design studied in the first year, we developed the inspection automation system including an underwater inspection robot, a laser position control subsystem and a main control subsystem. And we carried out underwater experiments on the reactor vessel mockup. After finishing this project successfully, we have a plan to commercialize our inspection system. Using this system, we can expect much reduction of the inspection time, performance enhancement, automatic management of inspection history, etc. In the economic point of view, we can also expect import substitution more than 5 million dollars. The established essential technologies for intelligent control and automation are expected to be synthetically applied to the automation of similar systems in nuclear power plants. 4 tabs., 37 figs., 6 refs. (Author).

  20. Analysis of the environmental control technology for oil shale development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Eckhoff, D.; Swanson, S.; Glenne, B.; Wagner, F.

    1978-02-01

    The environmental control technology proposed in the various oil shale projects which are under development are examined. The technologies for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the processed shale were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. There are no published national standards against which to judge the stabilization and vegetation of the processed shale. However, based on the goal of producing an environmentally and aesthetically acceptable finished processed shale pile, it seems probable that this can be accomplished. It is concluded that the environmental control technology is available to meet all current legal requirements. This was not the case before Colorado changed their applicable Air Pollution regulations in August of 1977; the previous ones for the oil shale region were sufficiently stringent to have caused a problem for the current stage of oil shale development. Similarly, the federal air-quality, non-deterioration regulations could be interpreted in the future in ways which would be difficult for the oil shale industry to comply with. The Utah water-quality, non-deterioration regulations could also be a problem. Thus, the only specific regulations which may be a problem are the non-deterioration parts of air and water quality regulations. The unresolved areas of environmental concern with oil shale processing are mostly for the problems not covered by existing environmental law, e.g., trace metals, polynuclear organics, ground water-quality changes, etc. These may be problems, but no evidence is yet available that these problems will prevent the successful commercialization of oil shale production.

  1. Staying competitive with advanced technologies for closed loop supervisory control

    Energy Technology Data Exchange (ETDEWEB)

    Radl, B.J.; Roland, W.B. [Pegasus Technologies Corp., Painesville, OH (United States); Kish, B. [Penn Power, New Castle, PA (United States)

    1996-05-01

    The following paper discusses the experience gained from installing a neural network-based supervisory control system for selected combustion parameters at Penn Power`s New Castle station. The primary goal of the program was to reduce NO{sub x} emissions, while maintaining or improving unit heat rate. The advanced technologies used to implement supervisory control include: Neural Networks, Genetic Algorithms, Pattern Recognition and Data Visualization. The program was jointly funded by Ohio Edison, U.S. Department of Energy (DOE), Environmental Protection Agency (EPA) and Pegasus Technologies Corporation, under a National Industrial Competitiveness through Energy, Environment and Economics (NICE) grant program. The system is installed on a 1950s vintage Babcock & Wilcox front-fired (four levels) drum unit with a gross generation capacity of 146 MW The program linked a Unix workstation, where the supervisory control system resides, with a Network 90 Digital Control System (DCS). The system uses a neural network-based nonlinear model of the combustion process to interactively adjust setpoints and bias settings in the DCS. The system performs many {open_quotes}what if{close_quotes} simulations to optimize setpoints for the current operating conditions. The neural network model is updated periodically, learning from the most recent data. New setpoints are generated accordingly and downloaded into the DCS. Setpoint and bias adjustments are constrained within the original control system limits. Conditioning algorithms were developed to handle the inherently {open_quote}noisy{close_quote} input data and to provide stable output recommendations. Test results and parameters used for combustion optimization are summarized in this paper.

  2. Method of technological control of proportional electromagnets for control systems of their production

    Science.gov (United States)

    Lankin, A. M.; Lankin, M. V.; Lankina, M. Y.

    2017-02-01

    This article describes the algorithm of the method of technological control of proportional solenoids to control their production process. An important element in the process of production of proportional solenoids is to identify deviations from the nominal mode of its occurrence. This situation shows the relevance of developing a method of technological control of proportional solenoids providing information on process control in a short time. The proposed algorithm consists of four steps: measuring the dynamic characteristics of the magnetization of electromagnet testing, the use of principal component analysis to reduce the dimension of the analyzed information, the classification of products by the condition and sub-standards, the definition of the numerical values of the manufacturing process variations using a calibration method. This approach allows us to determine the type and the degree of impairment of the mode of the process that will lead to effective management of the production process of the electromagnetic actuators.

  3. Analysis of the environmental control technology for tar sand development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Glenne, B.; Bryner, C.

    1979-06-01

    The environmental technology for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the waste tar sand were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. Currently there are two large-scale plants producing liquid fuels from tar sands in Alberta, Canada which use similar technology involving surface mining, hot water extraction, and surface disposal of waste sand. These projects all meet the Canadian environmental control regulations in force at the time they began. The largest US deposits of tar sands are much smaller than the Canadian; 95 percent are located in the state of Utah. Their economics do not appear as attractive as the Canadian deposits. The environmental control costs are not large enough to make an otherwise economic project uneconomic. The most serious environmental conflict likely to occur over the recovery of liquid fuels from the US deposits of tar sands is that caused by the proximity of the deposits to national parks, national monuments, and a national recreation area in Utah. These areas have very stringent air pollution requirements; and even if the air pollution control requirements can be met, there may still be adequate opposition to large-scale mining ventures in these areas to prevent their commercial exploitation. Another environmental constraint may be water rights availability.Essentially all of the water running in the Colorado river basin is now legally allocated. Barring new interpretations of the legality of water rights purchase, Utah tar sands developments should be able to obtain water by purchasing existing irrigation water rights.

  4. Digital Control Technologies for Modular DC-DC Converters

    Science.gov (United States)

    Button, Robert M.; Kascak, Peter E.; Lebron-Velilla, Ramon

    2002-01-01

    Recent trends in aerospace Power Management and Distribution (PMAD) systems focus on using commercial off-the-shelf (COTS) components as standard building blocks. This move to more modular designs has been driven by a desire to reduce costs and development times, but is also due to the impressive power density and efficiency numbers achieved by today's commercial DC-DC converters. However, the PMAD designer quickly learns of the hidden "costs" of using COTS converters. The most significant cost is the required addition of external input filters to meet strict electromagnetic interference (MIAMI) requirements for space systems. In fact, the high power density numbers achieved by the commercial manufacturers are greatly due to the lack of necessary input filters included in the COTS module. The NASA Glenn Research Center is currently pursuing a digital control technology that addresses this problem with modular DC-DC converters. This paper presents the digital control technologies that have been developed to greatly reduce the input filter requirements for paralleled, modular DC-DC converters. Initial test result show that the input filter's inductor size was reduced by 75 percent, and the capacitor size was reduced by 94 percent while maintaining the same power quality specifications.

  5. The Model and Control Methods of Access to Information and Technology Resources of Automated Control Systems in Water Supply Industry

    Science.gov (United States)

    Rytov, M. Yu; Spichyack, S. A.; Fedorov, V. P.; Petreshin, D. I.

    2017-01-01

    The paper describes a formalized control model of access to information and technological resources of automated control systems at water supply enterprises. The given model considers the availability of various communication links with information systems and technological equipment. There are also studied control methods of access to information and technological resources of automated control systems at water supply enterprises. On the basis of the formalized control model and appropriate methods there was developed a software-hardware complex for rapid access to information and technological resources of automated control systems, which contains an administrator’s automated workplace and ultimate users.

  6. Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

    Science.gov (United States)

    Munday, Jeremy

    2016-01-01

    Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

  7. Performance of active vibration control technology: the ACTEX flight experiments

    Science.gov (United States)

    Nye, T. W.; Manning, R. A.; Qassim, K.

    1999-12-01

    This paper discusses the development and results of two intelligent structures space-flight experiments, each of which could affect architecture designs of future spacecraft. The first, the advanced controls technology experiment I (ACTEX I), is a variable stiffness tripod structure riding as a secondary payload on a classified spacecraft. It has been operating well past its expected life since becoming operational in 1996. Over 60 on-orbit experiments have been run on the ACTEX I flight experiment. These experiments form the basis for in-space controller design problems and for concluding lifetime/reliability data on the active control components. Transfer functions taken during the life of ACTEX I have shown consistent predictability and stability in structural behavior, including consistency with those measurements taken on the ground prior to a three year storage period and the launch event. ACTEX I can change its modal characteristics by employing its dynamic change mechanism that varies preloads in portions of its structure. Active control experiments have demonstrated maximum vibration reductions of 29 dB and 16 dB in the first two variable modes of the system, while operating over a remarkable on-orbit temperature range of -80 °C to 129 °C. The second experiment, ACTEX II, was successfully designed, ground-tested, and integrated on an experimental Department of Defense satellite prior to its loss during a launch vehicle failure in 1995. ACTEX II also had variable modal behavior by virtue of a two-axis gimbal and added challenges of structural flexibility by being a large deployable appendage. Although the loss of ACTEX II did not provide space environment experience, ground testing resulted in space qualifying the hardware and demonstrated 21 dB, 14 dB, and 8 dB reductions in amplitude of the first three primary structural modes. ACTEX II could use either active and/or passive techniques to affect vibration suppression. Both experiments trailblazed

  8. Towards the Gigantic: Entification and Standardization as Technologies of Control

    Directory of Open Access Journals (Sweden)

    Petter G. Almklov

    2012-12-01

    Full Text Available This paper is based on studies of how standardized entities work as elements in a regime to control risk and hazardous work. Drawing on empirical examples from the petroleum industry and infrastructure sectors, we illustrate not only the mech-anisms by which particular modes of entification are involved in regimes of con-trol but also their shortcomings and seductive powers as representations. We show how the world is semantically captured and organized to consist of controllable standardized entities by the organizational regimes in the industries we have stud-ied. This mode of entification is particularly effective in providing transcontextual mobility, as the registered entities can enter the ever-expanding information infra-structures of modernity. Although information infrastructures comprise the stand-ards regulating communication, they commonly materialize in information and communication technologies (ICT that provide an increasing number of effective and ubiquitous pathways through which standardized semantic signs can move and have effects. This is a core concern in the increasing focus on management by detailed regimes of accountability, measurement and standardization seen in most modern organizations. These developments, combined with the representational shortcomings of the standardized entifications, lead to a movement towards the gigantic. An ever-increasing number of signs with increasingly higher granularity are produced in order to control an ever-elusive non-entified world.

  9. An assistive controller for a lower-limb exoskeleton for rehabilitation after stroke, and preliminary assessment thereof.

    Science.gov (United States)

    Murray, Spencer A; Ha, Kevin H; Goldfarb, Michael

    2014-01-01

    This paper describes a novel controller, intended for use in a lower-limb exoskeleton, to aid gait rehabilitation in patients with hemiparesis after stroke. The controller makes use of gravity compensation, feedforward movement assistance, and reinforcement of isometric joint torques to achieve assistance without dictating the spatiotemporal nature of joint movement. The patient is allowed to self-select walking speed and is able to make trajectory adaptations to maintain balance without interference from the controller. The governing equations and the finite state machine which comprise the system are described herein. The control architecture was implemented in a lower-limb exoskeleton and a preliminary experimental assessment was conducted in which a patient with hemiparesis resulting from stroke walked with assistance from the exoskeleton. The patient exhibited improvements in fast gait speed, step length asymmetry, and stride length in each session, as measured before and after exoskeleton training, presumably as a result of using the exoskeleton.

  10. Environmental control technology for atmospheric carbon dioxide. Quarterly progress report No. 1, June 20, 1977--September 30, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, M.; Albanese, A.S.; Dang, V.D.

    1977-10-01

    The primary objective of the subject program is to assess the potential options for controlling atmospheric CO/sub 2/. Accordingly, CO/sub 2/ control scenarios based on conventional technology and applied to the larger industrial emitters will be prepared. The studies will include preliminary cost estimates of selected processes, to identify fruitful areas for environmental control technology (ECT) programmatic development as related to CO/sub 2/ release control. BNL's prior experience in this area includes the development and evaluation of a number of processes for removing CO/sub 2/ from the atmosphere for the purpose of producing synthetic carbonaceous fuels including methanol, gasoline, and methane. Background information from other DOE programs will be used to determine the limitations for the control studies. This progress report presents background information on: (1) the concentration levels of CO/sub 2/ in the atmosphere during the last one hundred years; (2) the possible effects of rising CO/sub 2/ levels; (3) the impact of fossil fuel use in the United States on overall worldwide CO/sub 2/ emissions; (4) the impact of increased coal utilization on CO/sub 2/ emissions; and (5) process considerations for controlling CO/sub 2/.

  11. User attitudes in analyzing digital slides in a quality control test bed: a preliminary study.

    Science.gov (United States)

    Della Mea, Vincenzo; Demichelis, Francesca; Viel, Federico; Dalla Palma, Paolo; Beltrami, Carlo Alberto

    2006-05-01

    The pathologist examines suitably stained glass slides through a bright field microscope in order to render histopathological or cytological diagnosis by looking at tissues and cells. Glass slides serve as a permanent record of the patient disease. Over the course of a patient's treatment slides may need to be reviewed at other institutions before treatment can commence. Due to their fragile nature a transportable permanent digital facsimile of the glass slide would be ideal. A digital slide is a set of digital images representing the whole slide normally used by the pathologist, or a significant part of it; it is usually made by a large amount of images, up to thousands, which makes its management difficult. The present paper provides a description of the requirements needed to reproduce glass slides and of the available technological equipment, then the features of the two systems we implemented on different hardware are described, together with those of the digital slide viewer. The viewer was evaluated in two experimental test phases, during which user behaviour and diagnostic reports were measured. Digital slides used in the two experiments were acquired with either system. Possible applications of digital slides are then discussed, including undergraduate and professional education, quality control, and image analysis on full samples as well as on tissue microarrays.

  12. Control of environmental impact with modern chemical technology

    Science.gov (United States)

    Hocking, Martin B.

    1986-03-01

    Here are assembled representative excerpts from a new text in applied chemistry. They illustrate the well-referenced treatment of industrial processes that are here considered with their related emission control problems and solutions. A brief account of general aspects of the industry is followed by surveys of the significance and technical aspects of air and water pollution chemistry. Consideration is given to emission avoidance or containment, waste treatment, and waste disposal options as they relate to both of these environmental areas. Details of salt recovery and the products of brine electrolysis plus environmental aspects of these operations are treated as examples of some of the processes discussed. Also covered are fertilizer constituent preparation, formulation, and use with consideration of the large-scale effects of each of these activities. Detailed reference is made to the chemical technology and emission control aspects of the pulp and paper industry and refinery operations. Throughout, integral process changes and waste recycling practices are directly related to emission control aspects of each process in a way to be useful to the student and professional alike. These excerpts are extracted from one of the first, single volume accounts to take this unified approach to the subject.

  13. IAQ control in nursing homes using integrated desiccant technology

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, B.M. [Engelhard ICC, Philadelphia, PA (United States); Miyauchi, Hikoo [Nichimen Engine Sales, Tokyo (Japan)

    1996-07-01

    The demographics of the Japanese population indicate a need to provide a greater degree of elderly care, largely due to the long life expectancy of the Japanese people. It is explained that in response to this need Japan has embarked upon a dramatic programme to construct 5000 facilities by the year 2001. Air conditioning requirements of the elderly are somewhat different than those for other facilities and present an opportunity for the use of specialized equipment that will satisfy those requirements. A new facility care unit for the elderly has been built in Nagano, Japan and will start operation at the end of 1996. A new desiccant air conditioning unit designed for this facility is described. It combines humidity control of a desiccant sub-system and the thermal control of a conventional chiller in a single air-handling system. Regeneration of the desiccant is realized by a propane boiler at 88C, which also supplies heat in winter. It is emphasized that this new and exciting approach to air conditioning will change the expectations of society about indoor air quality and comfort control, which have been governed by the use of conventional equipment only, together with its inherent limitations. Other potential applications of desiccant technology are in supermarkets, industrial spaces, Pachinko halls, etc.

  14. Process control systems: integrated for future process technologies

    Science.gov (United States)

    Botros, Youssry; Hajj, Hazem M.

    2003-06-01

    Process Control Systems (PCS) are becoming more crucial to the success of Integrated Circuit makers due to their direct impact on product quality, cost, and Fab output. The primary objective of PCS is to minimize variability by detecting and correcting non optimal performance. Current PCS implementations are considered disparate, where each PCS application is designed, deployed and supported separately. Each implementation targets a specific area of control such as equipment performance, wafer manufacturing, and process health monitoring. With Intel entering the nanometer technology era, tighter process specifications are required for higher yields and lower cost. This requires areas of control to be tightly coupled and integrated to achieve the optimal performance. This requirement can be achieved via consistent design and deployment of the integrated PCS. PCS integration will result in several benefits such as leveraging commonalities, avoiding redundancy, and facilitating sharing between implementations. This paper will address PCS implementations and focus on benefits and requirements of the integrated PCS. Intel integrated PCS Architecture will be then presented and its components will be briefly discussed. Finally, industry direction and efforts to standardize PCS interfaces that enable PCS integration will be presented.

  15. Survey of environmental-control technologies for industrial coal use

    Energy Technology Data Exchange (ETDEWEB)

    Seward, W.H.; Hollis, J.R.; Opalanko, R.S.

    1978-12-01

    This report presents the results of a screening study done by Mittelhauser Corporation for Argonne National Laboratory. The purpose of the study is to examine current and possible future constraints on the use of coal and coal-derived fuels in industry. Current environmental regulations pertaining to industrial fuel usage are listed and summarized. A Technology-Applications Matrix (TAM), which correlates generic types of industrial fuel-burning equipment with potential fuels, is a key element in this report. The study has led to several conclusions. Current environmental constraints may reduce significantly the attractiveness of coal-derived solid fuels. Coal-derived medium-Btu gases and methanol are unlikely to be economically competitive with natural gas, fuel oil, or other coal-derived synthetic fuels by 1985. It is unlikely that National Energy Act provisions, which force conversion of industrial facilities to coal-use, will be effective in changing the industrial fuel-use pattern in the United States in the near future. The most attractive application of coal technology in the industrial sector appears to be direct use of high-sulfur coal with post-combustion pollution control. It is recommended that this alternative be examined, along with the use of atmospheric fluidized-bed combustion, coal-oil mixtures, solvent-refined coal liquids, and high-Btu synthetic gas.

  16. Network Congestion Control in 4G Technology Through Iterative Server

    Directory of Open Access Journals (Sweden)

    Khaleel Ahmad

    2012-07-01

    Full Text Available During the last few decades, mobile communication has developed rapidly. The increasing dependency of people on telecommunication resources is pushing even more current technological developments in the mobile world. In Real-time multimedia applications, such as Live TV or live movie, video conferencing, VoIP, on-line gaming etc. are exciting applications to the success of 4G.In todays Internet these applications are not subject to congestion control, therefore the growth of popularity of these applications may endanger the stability of the Internet. In this paper, we propose a novel model to solve the network congestion problem through iterative server. In this model, when a client send a request to server then server will generate a individual iterative server for requesting client. After completing the request, the iterative server will be automatically destroyed.

  17. Flexible fuel engine based on multi-combustion control technologies

    Institute of Scientific and Technical Information of China (English)

    LI Xiaolu; HUANG Zhen; QIAO Xinqi; SONG Jun; FANG Junhua; XIA Huimin

    2005-01-01

    A combustion control strategy is proposed for diesel engine to reduce PM and NOx emissions significantly, which adopts some technologies including internal exhaust gas recirculation (EGR), split spray, adjustable fuel delivery advance angle and the application of alternative fuels. Based on this strategy, a flexible fuel engine has been developed. The experimental results show that this engine can be fueled with diesel fuel, alcohol, dimethyl carbonate (DMC), etc. It works with extremely low levels of particulate matter (PM) and NOx, 2~3% higher effective thermal efficiency on moderate and high loads when alternative fuels are used. This engine not only has lower exhaust emissions, but also can be fueled with those alternative fuels, which are difficult to be ignited by compression.

  18. Technology Update of a Control System Trough Corba Bus

    CERN Document Server

    Bertocchi, A; Buceti, G; Centioli, C; Muzio, D D; Iannone, F; Mazza, G; Panella, M; Vitale, V

    2001-01-01

    After more than 10 years of activity, FTU (Frascati Tokamak Upgrade) has to face the problem of taking advantage of the new hardware and software technology saving all the investments yet done. So, for example, the 20 years old Westinghouse PLCs (communicating only through a serial line) have to be leaved in operation while a web-based tool has to be released for plan monitoring purpose. CORBA bus has been demonstrated to be the answer to set up the communication between old and new hardware and software blocks. On FTU the control system is based on Basestar, a Digital/Compaq software suite. We will describe how the real time database of Basestar is now accessed by Java graphic tools, LabView and, in principle, any package accepting external routines. An account will be also done in the data acquisition area where a Camac serial highway driver has been integrated in the new architecture still through the CORBA bus

  19. Elements of Clean-room Technology and Contamination Control

    Directory of Open Access Journals (Sweden)

    J.C. Kapoor

    2003-07-01

    Full Text Available The heart of the clean room is the high efticiency particualte air (HEPA/ultra-low penetration air (ULPA filter, which provides the highest level of air cleaning ever achieved by a singleprocess step. Filter technology has seen tremendous growth in terms of ultimate performance and air handling capacity. Mere installation of ULPA filters of 99.99995 per cent efficiency for 0.2 um aerosol is not sufficient for achieving the desired performance of a clean room. Other design aspects like flow fields, face velocity, number of air changes, make-up air fractions and precise control of other environmental parameters (temperature, humidity, airflow, noise, vibrations, electrostatic discharge, etc. are equally important.

  20. Evaluation of the mental health benefits of yoga in a secondary school: a preliminary randomized controlled trial.

    Science.gov (United States)

    Khalsa, Sat Bir S; Hickey-Schultz, Lynn; Cohen, Deborah; Steiner, Naomi; Cope, Stephen

    2012-01-01

    The goal of this study was to evaluate potential mental health benefits of yoga for adolescents in secondary school. Students were randomly assigned to either regular physical education classes or to 11 weeks of yoga sessions based upon the Yoga Ed program over a single semester. Students completed baseline and end-program self-report measures of mood, anxiety, perceived stress, resilience, and other mental health variables. Independent evaluation of individual outcome measures revealed that yoga participants showed statistically significant differences over time relative to controls on measures of anger control and fatigue/inertia. Most outcome measures exhibited a pattern of worsening in the control group over time, whereas changes in the yoga group over time were either minimal or showed slight improvements. These preliminary results suggest that implementation of yoga is acceptable and feasible in a secondary school setting and has the potential of playing a protective or preventive role in maintaining mental health.

  1. Remediation Technology of Contaminated Areas with Organochlorines: A Preliminary Evaluation Seeking Potential Applications on the Site of Street Capua, Santo André - SP

    Directory of Open Access Journals (Sweden)

    Mauro Silva Ruiz

    2012-12-01

    Full Text Available This paper is aimed to analyze the use of remediation technologies for areas contaminated with organochlorine based on a literature review and discussions with specialists. The remediation technologies analyzed were bioremediation, phytoremediation, nanotechnology, chemical oxidation, and thermal desorption. The purpose is to identify and compare “key problems” for each of these technologies envisaging the use of one or more of these them f or the remediation of the Capua Street site in Santo André, SP. Four databases were used in the preliminary literature review: Scopus, SciELO, Web of Science, and Science Direct. A survey questionnaire was designed to gather information on publications of scientific papers and patents, specific uses of these technologies by companies, and cases of application. Since the quality of the data and information obtained from this questionnaire application was not satisfactory, a new research approach for complementing them was undertaken. For this purpose, the Web of Science was selected as the most adequate data basis to carry out this second survey. However, it was realized that even for this database - that is reference for evaluating academic institutions, researchers and maturity of technologies – bias coming from the original data source can affect the survey results. Moreover, as the number of keywords used in the research consisted of generic terms for each technology, it can also be assumed that if some authors have used very specific terms, a small amount of work published by them would possibly have been misrepresented in the final result.

  2. Advanced Aircraft Electrical System Control Technology Demonstrator. Phase I. Analysis and Preliminary Design.

    Science.gov (United States)

    1982-01-01

    initial startup as opposed to a restart, indicated by the INFLIGHT position. The start button permits the pilot to request the use of mission software...already loaded, while the LOAD button allows the pilot to force the reload of all mission software. In addition to the pilot initiated restart, the...APLCAINSCNTO _____SOFTWARE___ DA IT53 DT U ELCRIA FR3ELM ArhtetreI cluigET xctv TERMINL (105 The ERTE is a realtime system, in which the activities of the

  3. Remote sensing for the control of marine pollution. Preliminary inventory of available technologies

    Energy Technology Data Exchange (ETDEWEB)

    Massin, J.

    1978-03-01

    As regards damage to the marine environment, oil spills at sea are considered to be one of the main sources of pelagic pollution: at the present time, it is estimated that more than six million tons of hydrocarbons enter the marine environment as a result of shipping and certain coastal, industrial and urban activities, river-borne pollution, oil prospecting and mining at sea and, finally, natural seepage from certain sea bottoms. This pollution is mainly due to intentional discharge, i.e. the routine evacuation of hydrocarbon-carrying effluents, or to accidental discharge, as a result of damage to installations or ships. Because of the rapid development of techniques and the multiplicity of studies and research undertaken, particularly with a view to developing integrated remote detection systems to meet the overall requirements of users, it has been found desirable to take stock of present knowledge in this field (excluding satellites for the time being) so that the lines to be followed in the mentioned areas can be determined and assessed. This manual is a first inventory of available techniques, instrumentation, and research centers in the field of remote sensing of the marine environment for detection of pollution. Inclusion in this inventory of information from specific organizations or firms does not in any way imply approval or endorsement of the organizations or firms, or of particular equipment, by the CCMS, NATO, or the Alliance Nations.

  4. High resolution space quartz-flexure accelerometer based on capacitive sensing and electrostatic control technology.

    Science.gov (United States)

    Tian, W; Wu, S C; Zhou, Z B; Qu, S B; Bai, Y Z; Luo, J

    2012-09-01

    High precision accelerometer plays an important role in space scientific and technical applications. A quartz-flexure accelerometer operating in low frequency range, having a resolution of better than 1 ng/Hz(1/2), has been designed based on advanced capacitive sensing and electrostatic control technologies. A high precision capacitance displacement transducer with a resolution of better than 2 × 10(-6) pF/Hz(1/2) above 0.1 Hz, is used to measure the motion of the proof mass, and the mechanical stiffness of the spring oscillator is compensated by adjusting the voltage between the proof mass and the electrodes to induce a proper negative electrostatic stiffness, which increases the mechanical sensitivity and also suppresses the position measurement noise down to 3 × 10(-10) g/Hz(1/2) at 0.1 Hz. A high resolution analog-to-digital converter is used to directly readout the feedback voltage applied on the electrodes in order to suppress the action noise to 4 × 10(-10) g/Hz(1/2) at 0.1 Hz. A prototype of the quartz-flexure accelerometer has been developed and tested, and the preliminary experimental result shows that its resolution comes to about 8 ng/Hz(1/2) at 0.1 Hz, which is mainly limited by its mechanical thermal noise due to low quality factor.

  5. Preliminary Evaluation of Commercial Off the Shelf (COTS) Packing Materials for Flight Medication Dispenser (FMD) Technology Development

    Science.gov (United States)

    Du, B.; Daniels, V.; Crady, C.; Putcha, L.

    2011-01-01

    This slide presentation reviews preliminary results of the program to evaluate Commercial Off the Shelf (COTS) packaging materials for pharmaceutical stability. The need for improved packaging is due to possible changes in chemical and/or physical properties of the drugs, which cause reported reduced potency and/or altered bioavailability and decreased efficacy.

  6. Human-FES cooperative control for wrist movement: a preliminary study

    Directory of Open Access Journals (Sweden)

    Kai Gui

    2016-07-01

    Full Text Available Functional electrical stimulation (FES sometimes applies to patients with partial paralysis, so human voluntary control and FES control both exist. Our study aims to build a cooperative controller to achieve human-FES cooperation. This cooperative controller is formed by a classical FES controller and an impedance controller. The FES controller consists of a back propagation (BP neural network-based feedforward controller and a PID-based feedback controller. The function of impedance controller is to convert volitional force/torque, which is estimated from a three-stage filter based on EMG, into additional angle. The additional angle can reduce the FES intensity in our cooperative controller, comparing to that in classical FES controller. Some assessment experiments are designed to test the performance of the cooperative controller.

  7. Control technology for surface treatment of materials using induction hardening

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, J.B.; Skocypec, R.D. [Sandia National Labs., NM (United States)

    1997-04-01

    In the industrial and automotive industries, induction case hardening is widely used to provide enhanced strength, wear resistance, and toughness in components made from medium and high carbon steels. The process uses significantly less energy than competing batch process, is environmentally benign, and is a very flexible in-line manufacturing process. As such, it can directly contribute to improved component reliability, and the manufacture of high-performance lightweight parts. However, induction hardening is not as widely used as it could be. Input material and unexplained process variations produce significant variation in product case depth and quality. This necessitates frequent inspection of product quality by destructive examination, creates higher than desired scrap rates, and causes de-rating of load stress sensitive components. In addition, process and tooling development are experience-based activities, accomplished by trial and error. This inhibits the use of induction hardening for new applications, and the resultant increase in energy efficiency in the industrial sectors. In FY96, a Cooperative Research and Development Agreement under the auspices of the Technology Transfer Initiative and the Partnership for a New Generation of Vehicles was completed. A multidisciplinary team from Sandia National Labs and Delphi Saginaw Steering Systems investigated the induction hardening by conducting research in the areas of process characterization, computational modeling, materials characterization, and high speed data acquisition and controller development. The goal was to demonstrate the feasibility of closed-loop control for a specific material, geometry, and process. Delphi Steering estimated annual savings of $2-3 million per year due to reduced scrap losses, inspection costs, and machine down time if reliable closed-loop control could be achieved. A factor of five improvement in process precision was demonstrated and is now operational on the factory floor.

  8. Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-07-01

    In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

  9. Water quality-based real time control of integrated urban drainage: a preliminary study from Copenhagen, Denmark

    DEFF Research Database (Denmark)

    Vezzaro, Luca; Lund Christensen, Margit; Thirsing, Carsten

    2013-01-01

    in the Lynetten catchment (Copenhagen, Denmark). Two different strategies were simulated, considering: (i) water quality at the wastewater treatment plant (WWTP) inlet and (ii) pollution discharge to the bathing areas. These strategies were included in the Dynamic Overflow Risk Assessment (DORA) RTC strategy......Global Real Time Control (RTC) of urban drainage systems is increasingly seen as cost-effective solution for responding to increasing performance demands. This study investigated the potential for including water-quality based RTC into the global control strategy which is under implementation...... period, no significant changes were observed. These preliminary results require further analysis by including detailed water quality measurements and simulations. Nevertheless, the potential for including water-quality RTC in global RTC schemes was unveiled, providing a further option to urban water...

  10. Randomized Controlled Pilot Study Testing Use of Smartphone Technology for Obesity Treatment

    OpenAIRE

    Allen, Jerilyn K.; Janna Stephens; Dennison Himmelfarb, Cheryl R.; Stewart, Kerry J.; Sara Hauck

    2013-01-01

    Background. The established interventions for weight loss are resource intensive which can create barriers for full participation and ultimate translation. The major goal of this pilot study was to evaluate the feasibility, acceptability, and preliminary efficacy of theoretically based behavioral interventions delivered by smartphone technology. Methods. The study randomized 68 obese adults to receive one of four interventions for six months: (1) intensive counseling intervention, (2) intensi...

  11. Feasibility, Acceptability, and Preliminary Effectiveness of a Peer-Delivered and Technology Supported Self-Management Intervention for Older Adults with Serious Mental Illness.

    Science.gov (United States)

    Fortuna, Karen L; DiMilia, Peter R; Lohman, Matthew C; Bruce, Martha L; Zubritsky, Cynthia D; Halaby, Mitch R; Walker, Robert M; Brooks, Jessica M; Bartels, Stephen J

    2017-09-26

    To assess the feasibility, acceptability, and preliminary effectiveness of a peer-delivered and technology supported integrated medical and psychiatric self-management intervention for older adults with serious mental illness. Ten older adults with serious mental illness (i.e., schizophrenia, schizoaffective disorder, bipolar disorder, or major depressive disorder) and medical comorbidity (i.e., cardiovascular disease, obesity, diabetes, chronic obstructive pulmonary disease, hypertension, and/or high cholesterol) aged 60 years and older received the PeerTECH intervention in their homes. Three certified peer specialists were trained to deliver PeerTECH. Data were collected at baseline, one-month, and three-month. The pilot study demonstrated that a three-month, peer-delivered and technology-supported integrated medical and psychiatric self-management intervention ("PeerTECH") was experienced by peer specialists and participants as feasible and acceptable. PeerTECH was associated with statistically significant improvements in psychiatric self-management. In addition, pre/post, non-statistically significant improvements were observed in self-efficacy for managing chronic health conditions, hope, quality of life, medical self-management skills, and empowerment. This pre/post pilot study demonstrated it is possible to train peers to use technology to deliver an integrated psychiatric and medical self-management intervention in a home-based setting to older adults with serious mental illness with fidelity. These findings provide preliminary evidence that a peer-delivered and technology-supported intervention designed to improve medical and psychiatric self-management is feasible, acceptable, and is potentially associated with improvements in psychiatric self-management, self-efficacy for managing chronic health conditions, hope, quality of life, medical self-management skills, and empowerment with older adults with serious mental illness and chronic health conditions.

  12. Systems engineering identification and control of mixed waste technology development

    Energy Technology Data Exchange (ETDEWEB)

    Beitel, G.A.

    1997-08-01

    The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop technologies required to meet the Department`s commitments for treatment of mixed low-level and transuranic wastes. Waste treatment includes all necessary steps from generation through disposal. Systems engineering was employed to reduce programmatic risk, that is, risk of failure to meet technical commitments within cost and schedule. Customer needs (technology deficiencies) are identified from Site Treatment Plans, Consent Orders, ten year plans, Site Technical Coordinating Groups, Stakeholders, and Site Visits. The Technical Baseline, a prioritized list of technology deficiencies, forms the basis for determining which technology development activities will be supported by the MWFA. Technology Development Requirements Documents are prepared for each technology selected for development. After technologies have been successfully developed and demonstrated, they are documented in a Technology Performance Report. The Technology Performance Reports are available to any of the customers or potential users of the technology, thus closing the loop between problem identification and product development. This systematic approach to technology development and its effectiveness after 3 years is discussed in this paper.

  13. An Adaptive Neuromuscular Controller for Assistive Lower-Limb Exoskeletons: A Preliminary Study on Subjects with Spinal Cord Injury

    Directory of Open Access Journals (Sweden)

    Amy R. Wu

    2017-06-01

    Full Text Available Versatility is important for a wearable exoskeleton controller to be responsive to both the user and the environment. These characteristics are especially important for subjects with spinal cord injury (SCI, where active recruitment of their own neuromuscular system could promote motor recovery. Here we demonstrate the capability of a novel, biologically-inspired neuromuscular controller (NMC which uses dynamical models of lower limb muscles to assist the gait of SCI subjects. Advantages of this controller include robustness, modularity, and adaptability. The controller requires very few inputs (i.e., joint angles, stance, and swing detection, can be decomposed into relevant control modules (e.g., only knee or hip control, and can generate walking at different speeds and terrains in simulation. We performed a preliminary evaluation of this controller on a lower-limb knee and hip robotic gait trainer with seven subjects (N = 7, four with complete paraplegia, two incomplete, one healthy to determine if the NMC could enable normal-like walking. During the experiment, SCI subjects walked with body weight support on a treadmill and could use the handrails. With controller assistance, subjects were able to walk at fast walking speeds for ambulatory SCI subjects—from 0.6 to 1.4 m/s. Measured joint angles and NMC-provided joint torques agreed reasonably well with kinematics and biological joint torques of a healthy subject in shod walking. Some differences were found between the torques, such as the lack of knee flexion near mid-stance, but joint angle trajectories did not seem greatly affected. The NMC also adjusted its torque output to provide more joint work at faster speeds and thus greater joint angles and step length. We also found that the optimal speed-step length curve observed in healthy humans emerged for most of the subjects, albeit with relatively longer step length at faster speeds. Therefore, with very few sensors and no predefined

  14. Mercury Emission Control Technologies for PPL Montana-Colstrip Testing

    Energy Technology Data Exchange (ETDEWEB)

    John P. Kay; Michael L. Jones; Steven A. Benson

    2007-04-01

    The Energy & Environmental Research Center (EERC) was asked by PPL Montana LLC (PPL) to provide assistance and develop an approach to identify cost-effective options for mercury control at its coal-fired power plants. The work conducted focused on baseline mercury level and speciation measurement, short-term parametric testing, and week long testing of mercury control technology at Colstrip Unit 3. Three techniques and various combinations of these techniques were identified as viable options for mercury control. The options included oxidizing agents or sorbent enhancement additives (SEAs) such as chlorine-based SEA1 and an EERC proprietary SEA2 with and without activated carbon injection. Baseline mercury emissions from Colstrip Unit 3 are comparatively low relative to other Powder River Basin (PRB) coal-fired systems and were found to range from 5 to 6.5 g/Nm3 (2.9 to 3.8 lb/TBtu), with a rough value of approximately 80% being elemental upstream of the scrubber and higher than 95% being elemental at the outlet. Levels in the stack were also greater than 95% elemental. Baseline mercury removal across the scrubber is fairly variable but generally tends to be about 5% to 10%. Parametric results of carbon injection alone yielded minimal reduction in Hg emissions. SEA1 injection resulted in 20% additional reduction over baseline with the maximum rate of 400 ppm (3 gal/min). Week long testing was conducted with the combination of SEA2 and carbon, with injection rates of 75 ppm (10.3 lb/hr) and 1.5 lb/MMacf (40 lb/hr), respectively. Reduction was found to be an additional 30% and, overall during the testing period, was measured to be 38% across the scrubber. The novel additive injection method, known as novel SEA2, is several orders of magnitude safer and less expensive than current SEA2 injection methods. However, used in conjunction with this plant configuration, the technology did not demonstrate a significant level of mercury reduction. Near-future use of this

  15. Current Status of the Transmutation Reactor Technology and Preliminary Evaluation of Transmutation Performance of the KALIMER Core

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Ser Gi; Sim, Yoon Sub; Kim, Yeong Il; Kim, Young Gyum; Lee, Byung Woon; Song, Hoon; Lee, Ki Bog; Jang, Jin Wook; Lee, Dong Uk

    2005-08-15

    Recently the most countries using the nuclear power plants for electricity generation have been faced with the problem of the preparation of the repository for the disposition of the nuclear waste generated from LWR. It was well-known that the issues related with long term risk of the radioactive wastes for the future generations are due only to 1% of the total waste. This small fraction of 1% consists of transuranic (TRU) nuclides such as Pu, Np, Am, Cm and the long lived fission products such as Tc and I. For the transuranic (TRU) nuclides, their half lives range from several years to several hundred thousands years and hence their radioactive toxicity can be lasted over very long time period. This has made the change of the rule of the fast spectrum reactor from the economical use of uranium resource through breeding to the reduction of the nuclear waste through the transmutation. The purpose of this study is to obtain the basic knowledge on the nuclear transmutation technology and to suggest the technical solution ways for the future technology development and enhancement through a survey of the state-of-art of the international research on the nuclear transmutation. The increase of the transmutation rate requires the reduction of the breeding ratio. In fact, the transmutation rate is determined by the breeding ratio. The reduction of the breeding ratio can be achieved by reducing the U-238 content in fuel or increasing the neutron leakage through core boundary or absorbing the neutrons by using some absorbers. However, the reduction of the U-238 content results in the degradation of the fuel Doppler coefficient that is one of the most important safety-related parameters and the reduction of the effective delayed neutron fraction that is related with the controllability of the reactor core. Also, the increase of the transmutation rate can lead to the increase of the coolant void reactivity worth unless some ways to reduce the coolant void reactivity are not

  16. Feasibility and preliminary effectiveness of ice therapy in patients with an acute tear in the gastrocnemius muscle: A pilot randomized controlled trial

    NARCIS (Netherlands)

    Prins, J.C.M.; Stubbe, J.H.; Meeteren, N.L.U. van; Scheffers, F.A.; Dongen, M.C.J.M. van

    2011-01-01

    Objective: To investigate the feasibility of a randomized controlled trial and the preliminary effectiveness of ice therapy in the acute phase of a gastrocnemius tear for the quality of functional recovery. Design: A pilot version of an intended prospective randomized controlled clinical trial was

  17. Application of new technology to SMART instrumentation and control systems

    Energy Technology Data Exchange (ETDEWEB)

    Park, Heui Youn; Lee, C. K.; Kim, D. H.; Suh, Y. S.; Hur, S.; Seong, S. H.; Jang, G. S.; Koo, I. S.; Chang, M. H

    1998-03-01

    It is very important to examine the conformance with licensing requirements and standards when new digital technology and equipment apply to nuclear plants. Key requirements of licensing on digitalisation using new technologies are software and hardware V and V, reliability of communication network, and diversity and defence-in-depth concept against common mode failures of hardware and software. And it should be also evaluated whether the selection and application of new technology comply with the design concept and requirements of SMART MMIS or not. In this report, we reviewed digitalisation materials such as EPRI`s ALWR utility requirements document, I and C upgrade plan, guideline on licensing digital upgrades, and IAEA`s issues and approaches to plant modernization to explore application method on new I and C technologies, and evaluated the state of applicable new technologies for SMART MMIS which are selected from the technologies, methods, and manuals of the industrial area. (author). 36 refs., 15 tabs.

  18. Phase I: controls preliminary design report for Brayton Isotope Power System (BIPS)

    Energy Technology Data Exchange (ETDEWEB)

    1976-08-20

    Background analyses of three control systems capable of controlling the speed, output voltage, and start rate of Brayton Isotope Power Systems (BIPS) are presented. Conclusions of all functions considered are summarized. (TFD)

  19. Preliminary screening of alternative technologies to incineration for treatment of chemical-agent-contaminated soil, Rocky Mountain Arsenal

    Energy Technology Data Exchange (ETDEWEB)

    Shem, L.M.; Rosenblatt, D.H.; Smits, M.P.; Wilkey, P.L.; Ballou, S.W.

    1995-12-01

    In support of the U.S. Army`s efforts to determine the best technologies for remediation of soils, water, and structures contaminated with pesticides and chemical agents, Argonne National Laboratory has reviewed technologies for treating soils contaminated with mustard, lewisite, sarin, o-ethyl s-(2- (diisopropylamino)ethyl)methyl-phosphonothioate (VX), and their breakdown products. This report focuses on assessing alternatives to incineration for dealing with these contaminants. For each technology, a brief description is provided, its suitability and constraints on its use are identified, and its overall applicability for treating the agents of concern is summarized. Technologies that merit further investigation are identified.

  20. American export control, technology spillover and innovation of Chinese pharmaceutical Industry.

    Science.gov (United States)

    Hui, Jiang

    2017-05-01

    This paper was aimed to analyze whether the U.S. strict export control to China affects the technological innovation of Chinese pharmaceutical industry. This paper selected the data of technological innovation and the expenditure of high and new technology adoption in China's pharmaceutical industry from 1995 to 2014, created panel regression model to study the impact of export controls on technology spillovers and the impact of technology spillovers on innovation capacity. The results show that US export control has a significant impact on technology spillovers, but foreign technology spillovers have no significant impact on the innovation of Chinese pharmaceutical industry. Although the US export control prevented foreign technology spillovers to China, but indirectly stimulated the domestic technology spillovers to pharmaceutical manufacturing industry in China. Statistical analysis show that the correlation coefficient between innovation capacity and expenditure for high technology adoption is not significant, but the expenditure of purchasing domestic technical is essential to pharmaceutical innovation. This study shows that US export control indirectly, not directly, affected the technological innovation of China's pharmaceutical industry, affected the allocation of innovative resources, but failed to prevent the technological progress and competitiveness improvement of Chinese pharmaceutical industry.

  1. Integrated Motion Planning and Autonomous Control Technology for Autonomous ISR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SSCI and MIT propose to design, implement and test a comprehensive Integrated Mission Planning & Autonomous Control Technology (IMPACT) for Autonomous ISR...

  2. Vitamin E neuroprotection against cisplatin ototoxicity: Preliminary results from a randomized, placebo-controlled trial.

    Science.gov (United States)

    Villani, Veronica; Zucchella, Chiara; Cristalli, Giovanni; Galiè, Edvina; Bianco, Francesco; Giannarelli, Diana; Carpano, Silvia; Spriano, Giuseppe; Pace, Andrea

    2016-04-01

    Few studies have investigated the effect of vitamin E in reducing the cisplatin (CDDP)-induced ototoxicity. This study evaluated vitamin E supplementation as a protecting agent against CDDP-induced ototoxicity. Patients who started CDDP were randomly assigned to receive vitamin E supplementation at 400 mg per day (group 1) or placebo (group 2). Audiograms and evoked brainstem responses were obtained at baseline, and after 1, 2, and 3 months. Twenty-three patients affected by solid malignancies were enrolled (13 in group 1 and 10 in group 2). At 1 month, a significant hearing loss in group 2 at both 2000 HZ (right ear: p = .05; left ear: p = .04) and 8000 HZ (right ear: p = .04; left ear: p = .03) was detected when compared to baseline values. Audiograms did not show significant changes. At 1 month, evoked brainstem responses remained unchanged in both arms without significant differences between groups. These preliminary findings confirm the neuroprotective properties of vitamin E against the CDDP-induced ototoxicity. © 2016 Wiley Periodicals, Inc. Head Neck 38: E2118-E2121, 2016. © 2016 Wiley Periodicals, Inc.

  3. Control of the parameters of attention in basketball at the stage of preliminary basic preparation

    Directory of Open Access Journals (Sweden)

    Olena Mitova

    2015-10-01

    Full Text Available Purpose: to determine the parameters of attention of basketball players aged 13–14 years old before and after the exercises of various kinds. Material and Methods: the study involved 3 teams of basketball players aged 13–14 years old from training groups. The total number of investigated people is 50. The study was carried out on the basis of Sports Children and Youth Olympic school № 5 in Dnepropetrovsk. We used the methods of theoretical analysis and synthesis of the literature, the method of analysis of documentary materials, pedagogical supervision, psychological testing, pulsometry, methods of mathematical statistics.The following techniques were used to determine the parameters of attention: «Mixed up line», proofreading test with Landoldt rings, proofreading test with letters. Results: during our research there was defined the predominantly low level of attention of basketball players at the stage of preliminary basic preparation. It was found out the specific nature of the load influences the decrease of the parameters in a greater degree, especially concentration, switching, and stability decline, the number of errors increases. Conclusions: on the basis of studies arises the necessity to improve monitoring systems in the Sports Children and Youth schools with usage of tests to determine the components of psychological readiness

  4. Wastewater and sludge control-technology options for synfuels industries

    Energy Technology Data Exchange (ETDEWEB)

    Castaldi, F.J.; Harrison, W.; Ford, D.L.

    1981-02-01

    The options examined were those of zero discharge, partial water reuse with restricted discharge of treated effluents, and unrestricted discharge of treated effluents. Analysis of cost data and performance-analyses data for several candidate secondary-wastewater-treatment unit processes indicated that combined activated-sludge/powdered-activated-carbon (AS/PAC) treatment incorporating wet-air-oxidation carbon regeneration is the most cost-effective control technology available for the removal of organic material from slagging, fixed-bed process wastewaters. Bench-scale treatability and organic-constituent removal studies conducted on process quench waters from a pilot-scale, slagging, fixed-bed gasifer using lignite as feedstock indicated that solvent extraction followed by AS/PAC treatment reduces levels of extractable and chromatographable organics to less than 1 ..mu..g/L in the final effluent. Levels of conventional pollutants also were effectively reduced by AS/PAC to the minimum water-quality standards for most receiving waters. The most favored and most cost-effective treatment option is unrestricted discharge of treated effluents with ultimate disposal of biosludges and landfilling of gasifier ash and slag. This option requires a capital expenditure of $8,260,000 and an annual net operating cost of $2,869,000 in 1978 dollars, exclusive of slag disposal. The net energy requirement of 19.6 x 10/sup 6/ kWh/year, or 15.3 kWh/1000 gal treated, is less than 6% of the equivalent energy demand associated with the zero-discharge option.

  5. Preliminary Conceptual Design and Development of Core Technology of Very High Temperature Gas-Cooled Reactor Hydrogen Production

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Jong Hwa; Kang, H. S.; Gil, C. S. and others

    2006-05-15

    For the nuclear hydrogen production system, the VHTR technology and the IS cycle technology are being developed. A comparative evaluation on the block type reactor and the pebble type reactor is performed to decide a proper nuclear hydrogen production reactor. 100MWt prismatic type reactor is tentatively decided and its safety characteristics are roughly investigated. Computation codes of nuclear design, thermo-fluid design, safety-performance analysis are developed and verified. Also, the development of a risk informed design technology is started. Experiments for metallic materials and graphites are carried out for the selection of materials of VHTR components. Diverse materials for process heat exchanger are studied in various corrosive environments. Pyrolytic carbon and SiC coating technology is developed and fuel manufacturing technology is basically established. Computer program is developed to evaluate the performance of coated particle fuels.

  6. A Preliminary Introduction to the OTAM: Exploring Users’ Perceptions of their on-going Interaction with Adopted Technologies

    Directory of Open Access Journals (Sweden)

    Shirlee-ann Knight

    2011-03-01

    Full Text Available ABSTRACT A common criticism directed at Davis’ (1986; 1989 Technology Acceptance Model relates to its failure to adequately frame the “experienced” user’s ongoing adoption and exploitation of information technologies. Given the pervasive nature of technology into individual users’ ongoing, everyday communication and information interactions, along with the “new adopter” becoming an increasingly rare entity, the TAM is in danger of becoming a somewhat obsolete framework for investigating user-technology interaction. Presented is a critical analysis of the development and current state of the TAM, followed by a proposed addition to the existing Perceived Usefulness (PU and Perceived Ease of Use (PEoU TAM constructs. The paper contends that the inclusion of a Perception of Interaction (PoI construct allows researchers to develop an investigative framework which facilitates an exploration of users’ ongoing perceptions of the predictability of their technology interaction processes.

  7. Transmission Control of Transport and Technological Cars in Acceleration Mode

    Directory of Open Access Journals (Sweden)

    B. I. Plujnikov

    2015-01-01

    Full Text Available In most structures a transmission of the transport-technological machine (TTM is controlled by automatic systems. In their creating it is necessary to specify the appropriate parameters and algorithms. In the total balance of the machine run time the acceleration mode is the most important. Therefore, an algorithm of the transmission gear ratio change during acceleration largely provides desirable rating of machines.It is known that the process of acceleration is estimated by its dynamic quality and fuel economy. To reach the best rating of both simultaneously is impossible. Therefore, as the criteria of estimate, were chosen the time and fuel consumption during acceleration to a fixed speed value.From a mathematical point of view, these criteria represent the sum of integrals, each of which defines the time or the fuel consumption during acceleration with a certain transmission gear ratio. The problem is formulated as follows: to determine the speed values of the TTM at the moments when the transmission gear ratio is changed providing the minimum values during fixed fuel supply for the estimate criteria. The latter condition in a certain way limits the task, but in explicit form there is no this control action in the dependence data.Given the variety of possible design options for the TTM, the solution is given by a specific example that simplifies the mathematics and makes it easier to understand the results obtained. As a TTM, is considered a passenger car with petrol engine and automatic transmission, which includes a hydrodynamic transformer and three-speed gearbox.A chosen way of solving the problem involves using the theory of ordinary maxima and minima, which allows finding the unknown values of independent variables. The expressions of sub-integral functions are in explicit form obtained and studied for meeting the necessary and sufficient conditions for existence of the extreme point. The result was a proof that in the case of

  8. Thirty Meter Telescope (TMT) Narrow Field Infrared Adaptive Optics System (NFIRAOS) real-time controller preliminary architecture

    Science.gov (United States)

    Kerley, Dan; Smith, Malcolm; Dunn, Jennifer; Herriot, Glen; Véran, Jean-Pierre; Boyer, Corinne; Ellerbroek, Brent; Gilles, Luc; Wang, Lianqi

    2016-08-01

    The Narrow Field Infrared Adaptive Optics System (NFIRAOS) is the first light Adaptive Optics (AO) system for the Thirty Meter Telescope (TMT). A critical component of NFIRAOS is the Real-Time Controller (RTC) subsystem which provides real-time wavefront correction by processing wavefront information to compute Deformable Mirror (DM) and Tip/Tilt Stage (TTS) commands. The National Research Council of Canada - Herzberg (NRC-H), in conjunction with TMT, has developed a preliminary design for the NFIRAOS RTC. The preliminary architecture for the RTC is comprised of several Linux-based servers. These servers are assigned various roles including: the High-Order Processing (HOP) servers, the Wavefront Corrector Controller (WCC) server, the Telemetry Engineering Display (TED) server, the Persistent Telemetry Storage (PTS) server, and additional testing and spare servers. There are up to six HOP servers that accept high-order wavefront pixels, and perform parallelized pixel processing and wavefront reconstruction to produce wavefront corrector error vectors. The WCC server performs low-order mode processing, and synchronizes and aggregates the high-order wavefront corrector error vectors from the HOP servers to generate wavefront corrector commands. The Telemetry Engineering Display (TED) server is the RTC interface to TMT and other subsystems. The TED server receives all external commands and dispatches them to the rest of the RTC servers and is responsible for aggregating several offloading and telemetry values that are reported to other subsystems within NFIRAOS and TMT. The TED server also provides the engineering GUIs and real-time displays. The Persistent Telemetry Storage (PTS) server contains fault tolerant data storage that receives and stores telemetry data, including data for Point-Spread Function Reconstruction (PSFR).

  9. A Preliminary Study on Natural Matrix Materials for Controlled Release Nitrogen Fertilizers

    Institute of Scientific and Technical Information of China (English)

    DU Chang-Wen; ZHOU Jian-Min; WANG Huo-Yan; LI Shou-Tian

    2004-01-01

    A controlled release N fertilizer was developed by the carrier method using natural polysaccharides (PS)and urea. The results showed that mixing of PS and urea led to significant control of urea release. When a cross-linker (boric acid or glutaraldehyde) was added, a better control effect was observed. During a 30 min leaching time the nitrogen release rate from the controlled release fertilizer was nearly constant, which was significantly different from normal urea. One of the controlled release mechanisms was related to space resistance from a large molecular structure. Infrared (IR) analysis indicated that interaction of PS with urea was through a hydrogen bond or a covalent bond. These bonds created an α-helix or high molecular network fertilizer carrier system, which was another reason for a controlled nutrient release. Pot experiment showed that nitrogen use efficiency could increase significantly with a carrier fertilizer.

  10. Multiphase Flow Technology Impacts on Thermal Control Systems for Exploration

    Science.gov (United States)

    McQuillen, John; Sankovic, John; Lekan, Jack

    2006-01-01

    The Two-Phase Flow Facility (TPHIFFy) Project focused on bridging the critical knowledge gap by developing and demonstrating critical multiphase fluid products for advanced life support, thermal management and power conversion systems that are required to enable the Vision for Space Exploration. Safety and reliability of future systems will be enhanced by addressing critical microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability. The project included concept development, normal gravity testing, and reduced gravity aircraft flight campaigns, in preparation for the development of a space flight experiment implementation. Data will be utilized to develop predictive models that could be used for system design and operation. A single fluid, two-phase closed thermodynamic loop test bed was designed, assembled and tested. The major components in this test bed include: a boiler, a condenser, a phase separator and a circulating pump. The test loop was instrumented with flow meters, thermocouples, pressure transducers and both high speed and normal speed video cameras. A low boiling point surrogate fluid, FC-72, was selected based on scaling analyses using preliminary designs for operational systems. Preliminary results are presented which include flow regime transitions and some observations regarding system stability.

  11. Controlled Rolling and Controlled Cooling Technology of Ultra-High Strength Steel with 700 Mpa Grade

    Institute of Scientific and Technical Information of China (English)

    QI Shi-ze; ZHANG Pi-jun; DU Lin-xiu; LIU Xiang-hua; WANG Guo-dong

    2004-01-01

    With Gleeble-1500 system, the influences of rolling temperature, finishing temperature and cooling rate on the mechanical properties of two ultra-high strength steels were analyzed. The microstructure of the hot rolled specimens was observed by optical microscope, TEM and SEM. The TRIP of HSLA steels was studied. The results show that the yield stress of 700 Mpa can be reached for two steels. The controlled rolling and controlled cooling technology has different effects on two steels, but it is rational to adopt finishing temperature 800 ℃ for both of them. The microstructure of the steels is mainly bainite, and the influence factors of mechanical properties are the size of bainite, and the size, distribution, composition and morphology of secondary phases. The deformation of high molybdenum steels at a high temperature with a high cooling rate would promote TRIP.

  12. Preliminary input to the space shuttle reaction control subsystem failure detection and identification software requirements (uncontrolled)

    Science.gov (United States)

    Bergmann, E.

    1976-01-01

    The current baseline method and software implementation of the space shuttle reaction control subsystem failure detection and identification (RCS FDI) system is presented. This algorithm is recommended for conclusion in the redundancy management (RM) module of the space shuttle guidance, navigation, and control system. Supporting software is presented, and recommended for inclusion in the system management (SM) and display and control (D&C) systems. RCS FDI uses data from sensors in the jets, in the manifold isolation valves, and in the RCS fuel and oxidizer storage tanks. A list of jet failures and fuel imbalance warnings is generated for use by the jet selection algorithm of the on-orbit and entry flight control systems, and to inform the crew and ground controllers of RCS failure status. Manifold isolation valve close commands are generated in the event of failed on or leaking jets to prevent loss of large quantities of RCS fuel.

  13. Automated Service Discovery using Autonomous Control Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  14. \\t Capital Planning and Investment Control (CPIC) for the Management of Information Technology Investments

    Science.gov (United States)

    Capital Planning and Investment Control (CPIC) is the Information Technology (IT) governance and management methodology in use at EPA for selecting, controlling and evaluating the performance of EPA IT investments throughout the full lifecycle.

  15. Label-controlled optical packet routing technologies and applications

    DEFF Research Database (Denmark)

    Koonen, A.M.J.; Yan, N.; Vegas Olmos, Juan José;

    2007-01-01

    An overview is given of various optical packet labeling techniques. The architecture and technologies are discussed for optical packet routing nodes using orthogonal labeling with optoelectronic label processing, and for nodes using time-serial labeling with all-optical time-serial label processing....... An example of a nearterm application is given, and a comparison of routing technologies is made regarding their cost and reliability aspects....

  16. Sexual Arousal and Self-Control: Results from a Preliminary Experimental Test of the Stability of Self-Control

    Science.gov (United States)

    Bouffard, Jeffrey; Kunzi, Tasha

    2012-01-01

    A central proposition of Gottfredson and Hirschi's (1990) General Theory of Crime is the relative stability of low self-control, however research on "self-control strength" suggests that it may vary across contexts. The current study examines these differing conceptions by randomly assigning participants to one of two sexual arousal conditions or…

  17. 香蕉产地初加工技术分类及集成%Classification, integration of preliminary processing technology in banana producing areas of China

    Institute of Scientific and Technical Information of China (English)

    徐贞贞; 孙洁; 赵靓; 沈瑾; 朱明; 廖小军

    2015-01-01

    Banana is the worldwide 2nd fruit with the biggest trade,it is also the only one of top five fruits with trade deficit compared with the other four, like apple, citrus, pear and peach, having great contributions to fruits export business in China. The import quantity of banana is continuing to rise even as the increasing production recent years, meanwhile the loss of banana in its producing area is approaching one million, almost two times of its export quantity in China, which suggests that loss reduction will contribute to shrink the trade deficit. Based on the statistics, more than 700 projects about banana research were approved by the Chinese governments and almost 500 scientific research institutions and universities were involved. However, few of them were about loss reduction in producing areas. Further researches about the exiting preliminary processing technologies may reduce banana loss in its producing area, then trying a new way to break through the bottleneck problem of banana industries and improve banana industry in China. This study has collected all harvesting, plantation transportation, commercialization, storage and transport technologies used currently in banana producing area, do further classification for all those preliminary processing technologies, and integrated four principal technology chains, then gave more information about the current Chinese banana production industry. Compared with other well-developed banana producers in the world, the gaps about large-scale production, market internationalization, technology integration, equipment serialization, facilities supporting and logistics professionalization of Chinese banana production industry are still obvious, which directly induced Chinese banana products showing no international competitiveness, no high-end brands, and only sharing the lower and middle markets. However, large-scale banana plantations are not fully accords with the retails-dominated condition in China, and it is

  18. [The technological innovation strategy for quality control of Chinese medicine based on Big Data].

    Science.gov (United States)

    Li, Zhen-hao; Qian, Zhong-zhi; Cheng, Yi-yu

    2015-09-01

    The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

  19. Optimizing and controlling earthmoving operations using spatial technologies

    Science.gov (United States)

    Alshibani, Adel

    This thesis presents a model designed for optimizing, tracking, and controlling earthmoving operations. The proposed model utilizes, Genetic Algorithm (GA), Linear Programming (LP), and spatial technologies including Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to support the management functions of the developed model. The model assists engineers and contractors in selecting near optimum crew formations in planning phase and during construction, using GA and LP supported by the Pathfinder Algorithm developed in a GIS environment. GA is used in conjunction with a set of rules developed to accelerate the optimization process and to avoid generating and evaluating hypothetical and unrealistic crew formations. LP is used to determine quantities of earth to be moved from different borrow pits and to be placed at different landfill sites to meet project constraints and to minimize the cost of these earthmoving operations. On the one hand, GPS is used for onsite data collection and for tracking construction equipment in near real-time. On the other hand, GIS is employed to automate data acquisition and to analyze the collected spatial data. The model is also capable of reconfiguring crew formations dynamically during the construction phase while site operations are in progress. The optimization of the crew formation considers: (1) construction time, (2) construction direct cost, or (3) construction total cost. The model is also capable of generating crew formations to meet, as close as possible, specified time and/or cost constraints. In addition, the model supports tracking and reporting of project progress utilizing the earned-value concept and the project ratio method with modifications that allow for more accurate forecasting of project time and cost at set future dates and at completion. The model is capable of generating graphical and tabular reports. The developed model has been implemented in prototype software, using Object

  20. Preliminary Retrospective Analysis of Daily Tomotherapy Output Constancy Checks Using Statistical Process Control.

    Directory of Open Access Journals (Sweden)

    Emilio Mezzenga

    Full Text Available The purpose of this study was to retrospectively evaluate the results from a Helical TomoTherapy Hi-Art treatment system relating to quality controls based on daily static and dynamic output checks using statistical process control methods. Individual value X-charts, exponentially weighted moving average charts, and process capability and acceptability indices were used to monitor the treatment system performance. Daily output values measured from January 2014 to January 2015 were considered. The results obtained showed that, although the process was in control, there was an out-of-control situation in the principal maintenance intervention for the treatment system. In particular, process capability indices showed a decreasing percentage of points in control which was, however, acceptable according to AAPM TG148 guidelines. Our findings underline the importance of restricting the acceptable range of daily output checks and suggest a future line of investigation for a detailed process control of daily output checks for the Helical TomoTherapy Hi-Art treatment system.

  1. A DDC-based capacity controller of a direct expansion (DX) air conditioning (A/C) unit for simultaneous indoor air temperature and humidity control - Pt. 1: Control algorithms and preliminary controllability tests

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zheng [Institute of Air Conditioning, China Academy of Building Research, Beijing 100013 (China); Deng, Shiming [Department of Building Services Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong SAR (China)

    2007-01-15

    For residential buildings located in the subtropics, direct expansion (DX) air conditioning (A/C) units are commonly used. Most DX A/C units are currently equipped with single-speed compressors and supply fans, relying on on-off cycling compressors as a low-cost approach to maintain only indoor air dry-bulb temperature, resulting in either space overcooling or an uncontrolled equilibrium indoor relative humidity (RH) level. With the rapid development of A/C industry, the use of variable-speed compressor and supply fan has become more and more prevalent and practical. This paper, the first part of a two-part series, reports on the development of a novel direct digital control (DDC)-based capacity controller for a DX A/C unit having variable-speed compressor and supply fan to simultaneously control indoor air temperature and RH in a conditioned space served by the DX A/C unit. The controller is the first of its kind as a composite parameter, sensible heat ratio (SHR), is used as a controlled parameter. The core element of the capacity controller, a numerical calculation algorithm (NCA) is firstly presented. This is followed by reporting the results of preliminary controllability tests of the DDC-based capacity controller, which suggested that the controller developed could achieve a reasonable control accuracy, but with room for improvement with respect to control sensitivity. Part II of the two-part series reports on the further development of the controller to improve its control sensitivity, and the results of associated controllability tests. (author)

  2. 76 FR 46841 - Certain Products Containing Interactive Program Guides and Parental Controls Technology; Notice...

    Science.gov (United States)

    2011-08-03

    ... COMMISSION Certain Products Containing Interactive Program Guides and Parental Controls Technology; Notice of... program guide and parental controls technology by reason of the infringement of certain claims of U.S... Commission has determined not to review the ID. The authority for the Commission's determination is contained...

  3. Electrorheological clutch for robotics applications: validation of mathematical model and preliminary control study

    Science.gov (United States)

    Tan, Kim P.; Stanway, Roger; Johnson, Andrew R.; Bullough, William A.; Tozer, Richard C.

    2001-08-01

    There is much current interest in the development of smart fluid clutches for use in the design of high speed machinery. In this paper, the authors employ an ER clutch mechanism in a robotic application. This clutch mechanism consists of twin ER clutches which are driven in opposite directions by two electric motors. By controlling the electric field applied to each clutch, it is possible to control the angular displacement of a robot arm. Before considering control, an established mathematical model is validated. The purpose of this model validation is to help design a control strategy for accurate positioning of the robot arm. Through the use of a Simulink program and a digital controller, both the simulated and experimental angular displacements are compared and shown to be in close agreement. Finally, the displacement response of the ER- driven and DC servo-actuatored robot arm are compared and conclusions are drawn as to the suitability of the ER clutch mechanism as a robotic actuator.

  4. Preliminary investigation of the effect of air-pollution-control residue from waste incineration on the properties of cement paste and mortar

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Kjeldsen, Ane Mette; Galluci, Emmanuel

    2006-01-01

    For preliminary assessment of the engineering properties of concrete with air-pollution-control residue from waste incineration (APC) the possible reactivity of APC and the effect of APC on cement hydration were investigated by isothermal calorimetry, chemical shrinkage (pychnometry), thermal...

  5. Preliminary study of S-CO{sub 2} cycle control logic for part load operation

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Yoonhan; Lee, Jeong Ik [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2016-05-15

    The benefits of S-CO{sub 2} cycle are relatively high efficiency under the mild turbine inlet temperature region, simple layout configuration and small foot-print. In addition, the safety of the SFR system can be inherently enhanced as the violent sodium-water reaction can be substituted with the mild sodium-CO{sub 2} reaction. 75MWe S-CO{sub 2} recompression cycle with radial type turbomachineries and PCHE was designed. Under various part load conditions (30-100% thermal load), off-design performance of the designed system was assessed, and different control logics were first tested. It was identified that the inventory control strategy is the most efficient logic for the part load operation. In the system operation, the compressor surge condition is seriously considered and controlled to avoid the system damage.

  6. Technology-Based Communication and the Development of Interpersonal Competencies Within Adolescent Romantic Relationships: A Preliminary Investigation.

    Science.gov (United States)

    Nesi, Jacqueline; Widman, Laura; Choukas-Bradley, Sophia; Prinstein, Mitchell J

    2017-06-01

    This study investigated longitudinal associations between adolescents' technology-based communication and the development of interpersonal competencies within romantic relationships. A school-based sample of 487 adolescents (58% girls; Mage  = 14.1) participated at two time points, one year apart. Participants reported (1) proportions of daily communication with romantic partners via traditional modes (in person, on the phone) versus technological modes (text messaging, social networking sites) and (2) competence in the romantic relationship skill domains of negative assertion and conflict management. Results of cross-lagged panel models indicated that adolescents who engaged in greater proportions of technology-based communication with romantic partners reported lower levels of interpersonal competencies one year later, but not vice versa; associations were particularly strong for boys. © 2016 The Authors. Journal of Research on Adolescence © 2016 Society for Research on Adolescence.

  7. [A preliminary clinical study on endoscopic measurement of lesion area with the method of digital image processing technology].

    Science.gov (United States)

    Zhang, Lei; Wang, Zhihua; Fu, Zhongqian; Fang, Pengcheng; Ling, Kai; Xu, Jianming; Kong, Derun; Xu, Zhangwei

    2013-10-01

    It is of great importance to measure the lesion area in scientific research and clinical practice. The present study aims to solve barrel distortion and measure lesion area with the technology of computer visualization. With the ultimate purpose to obtain the precise lesion area, the study, based on the original endoscopy system and digital image processing technology, dealt with the correction of barrel distortion by lens adjustment, calculated the gastric ulcer area with the aid of Qt database and finally developed an image processing software--Endoscope Assistant (EAS). The results showed that the EAS was accurate in vitro. It was employed to measure the gastric ulcer area of 45 patients and the results were compared with the traditional formula method. It could be well concluded that this technology is safe, accurate and economical for measuring gastric ulcer area.

  8. INL Control System Situational Awareness Technology Final Report 2013

    Energy Technology Data Exchange (ETDEWEB)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin

    2013-01-01

    The Situational Awareness project is a comprehensive undertaking of Idaho National Laboratory (INL) in an effort to produce technologies capable of defending the country’s energy sector infrastructure from cyber attack. INL has addressed this challenge through research and development of an interoperable suite of tools that safeguard critical energy sector infrastructure. The technologies in this project include the Sophia Tool, Mesh Mapper (MM) Tool, Intelligent Cyber Sensor (ICS) Tool, and Data Fusion Tool (DFT). Each is designed to function effectively on its own, or they can be integrated in a variety of customized configurations based on the end user’s risk profile and security needs.

  9. Preliminary Marine Safety Risk Assessment, Brandon Road Lock and Dam Invasive Species Control Measures

    Science.gov (United States)

    2016-12-01

    highlights individual standing at deck-edge without life jacket ...the open deck, wear a life jacket . Generally, these provisions intend to minimize the chance of falls into the water, either while a vessel crosses...standing at deck-edge without life jacket ). 6 CONCLUSIONS Of the different, potential invasive species control measures, and fully acknowledging

  10. A telerehabilitation program improves postural control in multiple sclerosis patients: a Spanish preliminary study.

    Science.gov (United States)

    Ortiz-Gutiérrez, Rosa; Cano-de-la-Cuerda, Roberto; Galán-del-Río, Fernando; Alguacil-Diego, Isabel María; Palacios-Ceña, Domingo; Miangolarra-Page, Juan Carlos

    2013-10-31

    Postural control disorders are among the most frequent motor disorder symptoms associated with multiple sclerosis. This study aims to demonstrate the potential improvements in postural control among patients with multiple sclerosis who complete a telerehabilitation program that represents a feasible alternative to physical therapy for situations in which conventional treatment is not available. Fifty patients were recruited. Control group (n = 25) received physiotherapy treatment twice a week (40 min per session). Experimental group (n = 25) received monitored telerehabilitation treatment via videoconference using the Xbox 360® and Kinect console. Experimental group attended 40 sessions, four sessions per week (20 min per session).The treatment schedule lasted 10 weeks for both groups. A computerized dynamic posturography (Sensory Organization Test) was used to evaluate all patients at baseline and at the end of the treatment protocol. Results showed an improvement over general balance in both groups. Visual preference and the contribution of vestibular information yielded significant differences in the experimental group. Our results demonstrated that a telerehabilitation program based on a virtual reality system allows one to optimize the sensory information processing and integration systems necessary to maintain the balance and postural control of people with multiple sclerosis. We suggest that our virtual reality program enables anticipatory PC and response mechanisms and might serve as a successful therapeutic alternative in situations in which conventional therapy is not readily available.

  11. A Telerehabilitation Program Improves Postural Control in Multiple Sclerosis Patients: A Spanish Preliminary Study

    Directory of Open Access Journals (Sweden)

    Rosa Ortiz-Gutiérrez

    2013-10-01

    Full Text Available Postural control disorders are among the most frequent motor disorder symptoms associated with multiple sclerosis. This study aims to demonstrate the potential improvements in postural control among patients with multiple sclerosis who complete a telerehabilitation program that represents a feasible alternative to physical therapy for situations in which conventional treatment is not available. Fifty patients were recruited. Control group (n = 25 received physiotherapy treatment twice a week (40 min per session. Experimental group (n = 25 received monitored telerehabilitation treatment via videoconference using the Xbox 360® and Kinect console. Experimental group attended 40 sessions, four sessions per week (20 min per session.The treatment schedule lasted 10 weeks for both groups. A computerized dynamic posturography (Sensory Organization Test was used to evaluate all patients at baseline and at the end of the treatment protocol. Results showed an improvement over general balance in both groups. Visual preference and the contribution of vestibular information yielded significant differences in the experimental group. Our results demonstrated that a telerehabilitation program based on a virtual reality system allows one to optimize the sensory information processing and integration systems necessary to maintain the balance and postural control of people with multiple sclerosis. We suggest that our virtual reality program enables anticipatory PC and response mechanisms and might serve as a successful therapeutic alternative in situations in which conventional therapy is not readily available.

  12. A Preliminary Investigation of Stimulus Control Training for Worry: Effects on Anxiety and Insomnia

    Science.gov (United States)

    McGowan, Sarah Kate; Behar, Evelyn

    2013-01-01

    For individuals with generalized anxiety disorder, worry becomes associated with numerous aspects of life (e.g., time of day, specific stimuli, environmental cues) and is thus under poor discriminative stimulus control (SC). In addition, excessive worry is associated with anxiety, depressed mood, and sleep difficulties. This investigation sought…

  13. Preliminary Analysis of an Oscillating Surge Wave Energy Converter with Controlled Geometry: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Tom, Nathan; Lawson, Michael; Yu, Yi-Hsiang; Wright, Alan

    2015-09-09

    The aim of this paper is to present a novel wave energy converter device concept that is being developed at the National Renewable Energy Laboratory. The proposed concept combines an oscillating surge wave energy converter with active control surfaces. These active control surfaces allow for the device geometry to be altered, which leads to changes in the hydrodynamic properties. The device geometry will be controlled on a sea state time scale and combined with wave-to-wave power-take-off control to maximize power capture, increase capacity factor, and reduce design loads. The paper begins with a traditional linear frequency domain analysis of the device performance. Performance sensitivity to foil pitch angle, the number of activated foils, and foil cross section geometry is presented to illustrate the current design decisions; however, it is understood from previous studies that modeling of current oscillating wave energy converter designs requires the consideration of nonlinear hydrodynamics and viscous drag forces. In response, a nonlinear model is presented that highlights the shortcomings of the linear frequency domain analysis and increases the precision in predicted performance.

  14. Effectiveness of Mindfulness-Based Stress Reduction Bibliotherapy: A Preliminary Randomized Controlled Trial.

    Science.gov (United States)

    Hazlett-Stevens, Holly; Oren, Yelena

    2017-06-01

    This randomized controlled investigation examined the effectiveness of a self-help bibliotherapy format of the evidence-based mindfulness-based stress reduction (MBSR) intervention. College students seeking stress reduction were randomly assigned to a 10-week MBSR bibliotherapy intervention group (n = 47) or a no-treatment control group (n = 45). Self-report measures were collected at baseline and postintervention. A total of 25 bibliotherapy and 43 control group participants provided final data following the intervention period. Compared to the control group, bibliotherapy participants reported increased mindfulness following the intervention. Significant decreases on measures of depression, anxiety, stress, perceived stress, and anxiety sensitivity also were reported postintervention as well as increased quality of life in physical health, psychological, and environmental domains. No statistically significant group effects were found for social relationships quality of life domain, worry, and experiential avoidance measures. This MBSR workbook may provide an acceptable and effective alternative for motivated individuals seeking to reduce stress, at least for a select group of individuals who are willing and able to sustain participation in the intervention. © 2016 Wiley Periodicals, Inc.

  15. Feasibility of controlling prosthetic hand using sonomyography signal in real time: preliminary study.

    Science.gov (United States)

    Shi, Jun; Chang, Qian; Zheng, Yong-Ping

    2010-01-01

    The morphological changes of muscle can be accurately detected by sonography, a process we have termed sonomyography (SMG). This article investigates the feasibility of using muscle thickness deformation SMG as a new signal source to control a prosthetic hand in real time. Thickness deformation SMG of the extensor muscle was measured by a block-matching algorithm during wrist extension-flexion; the amplitude of the deformation was used to control the prosthetic hand. We compared various fast-search algorithms to select the best one for real-time prosthetic control. The two-dimensional logarithmic search (TDL) algorithm, with and without streaming single-instruction multiple-data extensions, showed excellent execution efficiency, with an overall mean correlation coefficient of about 0.99, a mean standard root-mean-square error prosthetic hand, allowing for proprioception of muscle tension, and that the SMG provides good control of the prosthetic hand, allowing it to proportionally open and close with a fast-search algorithm.

  16. Control strategies for smart prosthetic hand technology: an overview.

    Science.gov (United States)

    Naidu, D; Chen, Cheng-Hung; Perez, Alba; Schoen, Marco P

    2008-01-01

    A chronological overview of the applications of control theory to prosthetic hand is presented. The overview focuses on hard computing or control techniques such as multivariable feedback, optimal, nonlinear, adaptive and robust and soft computing or control techniques such as artificial intelligence, neural networks, fuzzy logic, genetic algorithms and on the fusion of hard and soft control techniques. This overview is not intended to be an exhaustive survey on this topic and any omissions of other works is purely unintentional.

  17. Joystick control for powered mobility: current state of technology and future directions.

    Science.gov (United States)

    Dicianno, Brad E; Cooper, Rory A; Coltellaro, John

    2010-02-01

    Recent advancements in control interface technology have made the use of end devices such as power wheelchairs easier for individuals with disabilities, especially persons with movement disorders. In this article, we discuss the current state of control interface technology and the devices available clinically for power wheelchair control. We also discuss our research on novel hardware and software approaches that are revolutionizing joystick interface technology and allowing more customizability for individual users with special needs and abilities. Finally, we discuss the future of control interfaces and what research gaps remain.

  18. Control of Relative Air Humidity as a Potential Means to Improve Hygiene on Surfaces: A Preliminary Approach with Listeria monocytogenes.

    Science.gov (United States)

    Zoz, Fiona; Iaconelli, Cyril; Lang, Emilie; Iddir, Hayet; Guyot, Stéphane; Grandvalet, Cosette; Gervais, Patrick; Beney, Laurent

    2016-01-01

    Relative air humidity fluctuations could potentially affect the development and persistence of pathogenic microorganisms in their environments. This study aimed to characterize the impact of relative air humidity (RH) variations on the survival of Listeria monocytogenes, a bacterium persisting on food processing plant surfaces. To assess conditions leading to the lowest survival rate, four strains of L. monocytogenes (EGDe, CCL500, CCL128, and LO28) were exposed to different RH conditions (75%, 68%, 43% and 11%) with different drying kinetics and then rehydrated either progressively or instantaneously. The main factors that affected the survival of L. monocytogenes were RH level and rehydration kinetics. Lowest survival rates between 1% and 0.001% were obtained after 3 hours of treatment under optimal conditions (68% RH and instantaneous rehydration). The survival rate was decreased under 0.001% after prolonged exposure (16h) of cells under optimal conditions. Application of two successive dehydration and rehydration cycles led to an additional decrease in survival rate. This preliminary study, performed in model conditions with L. monocytogenes, showed that controlled ambient RH fluctuations could offer new possibilities to control foodborne pathogens in food processing environments and improve food safety.

  19. A new concept and preliminary study of variable hypersonic inlet with fixed geometry based on shockwave control

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The inlet plays a significant role in the hypersonic airbreathing propulsion. A fixed-geometry inlet is troubled by low air-capture ratio and large additional drag while operating below the design Mach number. Whereas a variable-geometry inlet can maximize performance, but adds weight and complexity to the propulsion system. Based on a fluidic shock shape control technique, this paper proposes a new concept of variable hypersonic inlet with fixed geometry, gives the realization scheme, and conducts a preliminary validation. The results show that the control of the external shock system and the effective throat area can be achieved by the self-provided high pressure fluid of the inlet. For an inlet with an operating Mach-number region of 4 to 6, the shock-on-lip condition can be maintained from Mach 5 to Mach 6 with the maximum expense of 1.8% secondary flow ratio, resulting in 20% extra captured mass flow and 8% less forebody drag at low Mach numbers compared with conventional fixed-geometry inlets. Thus, the performance enhancement by using the proposed variable inlet can substantially benefit the acceleration process of hypersonic vehicles at low Mach numbers.

  20. Role of technology in supporting quality control and treatment fidelity in a family caregiver clinical trial.

    Science.gov (United States)

    Farran, Carol J; Etkin, Caryn D; McCann, Judith J; Paun, Olimpia; Eisenstein, Amy R; Wilbur, Joellen

    2011-11-01

    This article describes how a family caregiver lifestyle physical activity clinical trial uses research technology to enhance quality control and treatment fidelity. This trial uses a range of Internet, Blaise(®) Windows-based software and Echo Server technologies to support quality control issues, such as data collection, data entry, and study management advocated by the clinical trials literature, and to ensure treatment fidelity concerning intervention implementation (i.e., design, training, delivery, receipt, and enactment) as proposed by the National Institutes of Health Behavior Change Consortium. All research staff are trained to use these technologies. Strengths of this technological approach to support quality control and treatment fidelity include the comprehensive plan, involvement of all staff, and ability to maintain accurate and timely data. Limitations include the upfront time and costs for developing and testing these technological methods, and having support staff readily available to address technological issues if they occur.

  1. The Impact on New Technologies on Shipboard Command and Control

    Science.gov (United States)

    2003-06-01

    PAFC ), and Molten Carbonate (MCFC). The type of fuel cell is named after the electrolyte that is uses. a. Proton Exchange Membrane 18 As the...weapons. This thesis focuses on the implementation of the new and emerging technologies mentioned previously (with the addition of fuel cells to fulfill...

  2. Technological aspects of corrosion control in metallic systems

    Science.gov (United States)

    Taylor, Matthew Logan

    Three corrosion control technologies were investigated, including the effect of nitrogen on the passivity of chromium in sulfate solutions, possible issues associated with the use of amines in steam turbine environments and the microstructure of naval advanced amorphous coatings. Nitrogen (N) is a minor alloying element commonly used to increase the strength of steels by stabilizing the austenite phase. Physical vapor deposited chromium + nitrogen (0, 6.8 and 8.9 at.%N) coatings were investigated as a model system, to test the model. Because Cr passive films have been observed to be generally n-type semiconductors, an impedance function containing a n-type Faradaic impedance was constructed and optimized to electrochemical impedance spectra for the model system at pH 4,7 and 10 1M sulfate solution at 30°C. An apparent deviation from theory was observed, however. The n-type model predicted steady state currents which were independent of potential, while the observed current densities had a positive correlation with potential. Mott-Schottky analysis revealed that the test potentials were within the n-p transition and p-type potential range, which resolves the apparent deviation. Despite this difficulty, however, the impedance model produced reasonably accurate results, calculating current densities to within one order of magnitude of the measured steady state currents where anodic currents were available and passive film thicknesses on the order of 1-2 nm. Various amines are commonly used to inhibit corrosion in thermal power generation systems, including steam turbines, by increasing the pH. However, during the shutdown phase of the power plant, it is possible for these inhibitors to concentrate and cause corrosion of the turbine rotor. The effect of two ammine inhibitors (monoethanolamine and dimethylamine) on the passivity of ASTM A470/471 steel is investigated in a simulated turbine environment at pH 7, and temperatures of 95°C and at 175°C. Potentiodynamic

  3. Perceptions and Use of Learning Management System Tools and Other Technologies in Higher Education: A Preliminary Analysis

    Science.gov (United States)

    Borboa, Danielle; Joseph, Mathew; Spake, Deborah; Yazdanparast, Atefeh

    2017-01-01

    This study examines student views and use of technology in conjunction with university coursework. Results reveal that there is widespread use of Microsoft PowerPoint and certain learning management system (LMS) features; however, there are significant differences in views concerning the degree to which these LMS tools enhance learning based on…

  4. An Analysis of Complex Multiple-Choice Science-Technology-Society Items: Methodological Development and Preliminary Results

    Science.gov (United States)

    Vazquez-Alonso, Angel; Manassero-Mas, Maria-Antonia; Acevedo-Diaz, Jose-Antonio

    2006-01-01

    The scarce attention to the assessment and evaluation in science education research has been especially harmful for teaching science-technology-society (STS) issues, due to the dialectical, tentative, value-laden, and polemic nature of most STS topics. This paper tackles the methodological difficulties of the instruments that monitor views related…

  5. A Yoga Intervention for Posttraumatic Stress: A Preliminary Randomized Control Trial.

    Science.gov (United States)

    Jindani, Farah; Turner, Nigel; Khalsa, Sat Bir S

    2015-01-01

    Yoga may be effective in the reduction of PTSD symptomology. The purpose of this study was to evaluate the impact of a Kundalini Yoga (KY) treatment on PTSD symptoms and overall wellbeing. To supplement the current field of inquiry, a pilot randomized control trial (RCT) was conducted comparing an 8-session KY intervention with a waitlist control group. 80 individuals with current PTSD symptoms participated. Both groups demonstrated changes in PTSD symptomology but yoga participants showed greater changes in measures of sleep, positive affect, perceived stress, anxiety, stress, and resilience. Between-groups effect sizes were small to moderate (0.09-0.25). KY may be an adjunctive or alternative intervention for PTSD. Findings indicate the need for further yoga research to better understand the mechanism of yoga in relation to mental and physical health, gender and ethnic comparisons, and short- and long-term yoga practice for psychiatric conditions.

  6. Evaluation of an additive efficacy in broiler litter microbial level control in field: preliminary results

    Directory of Open Access Journals (Sweden)

    Matteo Pennacchi

    2010-01-01

    Full Text Available The present study was conducted to evaluate in field the efficacy of an additive (SOP® C POULTRY, as an agent for the control of micro-organisms in broiler litter. The Total aerobic Microbial Count (TMC, Staphylococcus species (spp., Coliforms, and Salmonella spp. in broiler litter samples of both the Houses, 2 (H2 and 3 (H3, were determined, and also at the end of each cycle the mortality rate was recorded. The results showed significant reduction of all the microbial counts: P= 0.0078 (CMT, 0,0021 (Staphylococcus spp. and 0.0541 (Coliforms, and mortality (P= 0.00106 in treated litter samples H2 and the control H3.

  7. A Yoga Intervention for Posttraumatic Stress: A Preliminary Randomized Control Trial

    Directory of Open Access Journals (Sweden)

    Farah Jindani

    2015-01-01

    Full Text Available Yoga may be effective in the reduction of PTSD symptomology. The purpose of this study was to evaluate the impact of a Kundalini Yoga (KY treatment on PTSD symptoms and overall wellbeing. To supplement the current field of inquiry, a pilot randomized control trial (RCT was conducted comparing an 8-session KY intervention with a waitlist control group. 80 individuals with current PTSD symptoms participated. Both groups demonstrated changes in PTSD symptomology but yoga participants showed greater changes in measures of sleep, positive affect, perceived stress, anxiety, stress, and resilience. Between-groups effect sizes were small to moderate (0.09–0.25. KY may be an adjunctive or alternative intervention for PTSD. Findings indicate the need for further yoga research to better understand the mechanism of yoga in relation to mental and physical health, gender and ethnic comparisons, and short- and long-term yoga practice for psychiatric conditions.

  8. Production control in the steel industry with energy conservation considerations: a preliminary evaluation. [GASP

    Energy Technology Data Exchange (ETDEWEB)

    Takamoto, H.; Williams, T.J.

    1979-06-01

    The work here consists mainly of three tasks; the first is to construct the basic production model for the raw-material preparation and the iron-making area which had been ignored in the earlier work, but is vital to the energy problem. The second is to construct the energy utilization and energy generation models over all the steel production units involved in the plant. The third is to develop the hierarchy structure to control the energy management function.

  9. HIGH EFFICIENCY STRUCTURAL FLOWTHROUGH ROTOR WITH ACTIVE FLAP CONTROL: VOLUME ONE: PRELIMINARY DESIGN REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Zuteck, Michael D. [Zimitar, Inc.; Jackson, Kevin L. [Zimitar, Inc.; Santos, Richard A. [Zimitar, Inc.; Chow, Ray [Zimitar, Inc.; Nordenholz, Thomas R. [The California Maritime Academy; Wamble, John Lee [Zimitar, Inc.

    2015-05-16

    The Zimitar one-piece rotor primary structure is integrated, so balanced thrust and gravity loads flow through the hub region without transferring out of its composite material. Large inner rotor geometry is used since there is no need to neck down to a blade root region and pitch bearing. Rotor control is provided by a highly redundant, five flap system on each blade, sized so that easily handled standard electric linear actuators are sufficient.

  10. Nuclear Hardness Evaluation Procedures for the Preliminary Assessment of the FLEETSATCOM Attitude and Velocity Control Subsystem.

    Science.gov (United States)

    1979-12-01

    attitude and velocity control subsystem of the FLSATCOM satellite to various nuclear weapon effects. DD1473 E ITION OF INOV 6 IS OBSOLETE...thermomechanical damage and material degradation. These procedures are presented in Section 3. 3) the so-called top-level screen of the AVCS assessment which ETI...bays with cat-a-lac paint, a low Z material , to minimize cavity field coupling. 44 0 use of terminal protection, mostly in the form of zener diodes or

  11. Biocompetitive exclusion technology: A field system to control reservoir souring and increasing production

    Energy Technology Data Exchange (ETDEWEB)

    Sandbeck, K.A.; Hitzman, D.O.

    1995-12-31

    Biogenic formation of sulfide in reservoirs by Sulfate Reducing Bacteria (SRB) causes serious plugging, corrosion, and environmental safety problems. The production of sulfide can be decreased, and its concentration reduced, by the establishment and growth of an indigenous microbial population which results in a replacement of the SRB population. This approach to modify the reservoir ecology utilizing preexisting carbon sources coupled with the introduction of an alternate electron acceptor forms the basis of a new Biocompetitive Exclusion technology which has the potential to enhance oil recovery and decrease paraffin deposition and corrosion. Preliminary field results from an ongoing DOE-sponsored research program will be discussed.

  12. Neuropsychology, Social Cognition and Global Functioning Among Bipolar, Schizophrenic Patients and Healthy Controls: Preliminary Data

    Directory of Open Access Journals (Sweden)

    Elisabetta eCaletti

    2013-10-01

    Full Text Available This study aimed to determine the extent of impairment in social and non-social cognitive domains in an ecological context comparing bipolar (BD, schizophrenic patients (SKZ and healthy controls (HC. The sample was enrolled at the Department of Psychiatry of Policlinico Hospital, University of Milan, it includes stabilized schizophrenic patients (n = 30, euthymic bipolar patients (n = 18 and healthy controls (n = 18. Patients and controls completed psychiatric assessment rating scales, the Brief Assessment of Cognition in Schizophrenia (BACS and the Executive and Social Cognition Battery (ESCB that contains both ecological tests of executive function and social cognition, in order to better detect cognitive deficits in patients with normal results in standard executive batteries. The three groups differed significantly for gender and substance abuse, however the differences did not influence the results. Bipolar patients showed less impairment on cognitive performance compared to schizophrenic patients, even in ecological tests that mimic real life scenarios. In particular, BD performed better than SKZ in verbal memory (p

  13. Assessment of control technology for stationary sources. Volume I: technical discussion. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    The purpose of this project was to develop a reference document for use by the Air Resources Board, local air pollution control districts, and the U.S. Environmental Protection Agency that describes technological options available for the control of emissions from stationary sources located in California. Control technologies were examined for 10 industry groups and six air pollutants. Volume I, Technical Discussion, includes an overall introduction to the project, descriptions of its major elements, background information for each industry group addressed, and the project bibliography. In Volume II, Control Technology Data Tables, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts, and application status are presented in tabular format. Also included is a code list that classifies the stationary sources examined by industry, process and emission source.

  14. Blood pressure and heart rate during ovariohysterectomy in pyometra and control dogs: a preliminary investigation.

    Science.gov (United States)

    Höglund, Odd Viking; Lövebrant, Johanna; Olsson, Ulf; Höglund, Katja

    2016-11-17

    Surgery causes a stress response, a physiologic response to trauma. The intraoperative surgical stress response in dogs diagnosed with pyometra has not previously been described. The aim of this study was to investigate the intraoperative surgical stress response, assessed by blood pressure and heart rate measurements, in dogs diagnosed with pyometra and healthy controls. All dogs were premedicated with acepromazine and methadone, anaesthesia was induced with propofol and maintained with isoflurane, where after the dogs were subjected to ovariohysterectomy. Eight dogs diagnosed with pyometra and eight healthy controls were used. Systolic blood pressure and heart rate were measured to assess the surgical stress response. Additionally propofol dosage at induction of anaesthesia and the end-tidal isoflurane concentration were investigated. The surgery was split into four phases. Phase 0 was the period 10 min before the skin incision, phase 1 was skin incision and opening of abdomen, phase 2 was manipulation of uterine horns, lifting of the ovary with stretching of the mesovarium, ligation and transection of mesovarium and phase 3 was ligation and transection of cervix, removal of organs and closing of the abdomen. Dosage of propofol at induction of anaesthesia was 3.6 ± 1 mg/kg in dogs with pyometra and 4.1 ± 1 in healthy controls (P = 0.37). In both groups, systolic blood pressure increased between phase 1 and 2, from 87 ± 15 to 114 ± 19 mmHg in dogs with pyometra, and from 88 ± 18 to 106 ± 20 mmHg in healthy controls, (both P blood pressure did not differ significantly between groups in any of the phases. Heart rate and end-tidal concentration of isoflurane did not differ significantly between phases or between groups. The increased blood pressure at removal of ovaries during ovariohysterectomy suggests a pronounced noxious stimulus at this part of the procedure. In principle, the study parameters and response to surgery did not differ

  15. Curriculums in Industrial Technology. Plastics Technology. Industrial Maintenance. Computer Numerical Control. Teacher's Manuals and Student Learning Guides.

    Science.gov (United States)

    El Paso Community Coll., TX.

    Curriculum guides are provided for plastics technology, industrial maintenance, and computer numerical control. Each curriculum is divided into a number of courses. For each course these instructor materials are presented in the official course outline: course description, course objectives, unit titles, texts and materials, instructor resources,…

  16. Control Technologies for Room Air-conditioner and Packaged Air-conditioner

    Science.gov (United States)

    Ito, Nobuhisa

    Trends of control technologies about air-conditioning machineries, especially room or packaged air conditioners, are presented in this paper. Multiple air conditioning systems for office buildings are mainly described as one application of the refrigeration cycle control technologies including sensors for thermal comfort and heating/ cooling loads are also described as one of the system control technologies. Inverter systems and related technologies for driving variable speed compressors are described in both case of including induction motors and brushless DC motors. Technologies for more accurate control to meet various kind of regulations such as ozone layer destruction, energy saving and global warming, and for eliminating harmonic distortion of power source current, as a typical EMC problem, will be urgently desired.

  17. A preliminary investigation of the Environmental Control and Life Support Subsystem (EC/LSS) for the space construction base manufacturing modules

    Science.gov (United States)

    Wells, H. B.

    1977-01-01

    The preliminary data of the environmental control and life support subsystem for a space construction base manufacturing module was reported. A space processing module, which is capable of performing production biological experiments, was chosen as a baseline configuration. The primary assemblies and components considered for use were humidity and temperature control, ventilation fan, cabin fan, water separator, condensate storage, overboard dumping, distribution system, contaminant monitoring, cabin sensors, and fire and smoke detection.

  18. Environmental control implications of generating electric power from coal. 1977 technology status report. [300 references

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This report is an in-depth review and analysis of particulate control technologies applicable to coal-fired utility boilers. Sources and characteristics of fly ash, applicable emission regulations, and measurement techniques are also discussed. Available control technologies (electrostatic precipitators, fabric filters, and wet scrubbers) are described in detail. In each case, the theory of operation, factors affecting performance, representative installations, costs, and secondary environmental impacts are analyzed. Techniques under development for improving the performance or extending the capabilities of existing technologies are described. Advanced alternative technologies now in the research stage are also evaluated.

  19. Preliminary Report: Controller Prototyping and Validation for Photo-Voltaic Comfort Cooling

    DEFF Research Database (Denmark)

    Agesen, Mads Kronborg; Skou, Arne Joachim; Pedersen, Keld Lotzfeldt

    2016-01-01

    Large office buildings - typically with glass fronts - often suffer from a high cooling demand during summertime. Typically, this requires a large amount of additional electricity for the cooling system. One straightforward alternative is to store cooling energy using electricity generated by sol......, the possibility of providing improved comfort through intelligent supervisory control is studied. The system is comprised of a grid coupled photovoltaic system, a heat pump, an ice bank and a cooling coil to interface the existing ventilation system in the office building....

  20. Age-related differences in control of a visuomotor coordination task: a preliminary study

    OpenAIRE

    2016-01-01

    [Purpose] The purpose of the current study was to examine age-related differences in control of a perception-action coordination skill. We adapted a visuomotor tracking experiment requiring various coordination patterns between a limb’s motion and an external signal. [Subjects and Methods] A total of 12 subjects (6 elderly and 6 young) voluntarily participated in the study. The experimental session consisted of 3 trials for 3 different relative phase patterns: 0°, 90°, and 180°, defined by th...

  1. An adaptive sliding mode control technology for weld seam tracking

    Science.gov (United States)

    Liu, Jie; Hu, Youmin; Wu, Bo; Zhou, Kaibo; Ge, Mingfeng

    2015-03-01

    A novel adaptive sliding mode control algorithm is derived to deal with seam tracking control problem of welding robotic manipulator, during the process of large-scale structure component welding. The proposed algorithm does not require the precise dynamic model, and is more practical. Its robustness is verified by the Lyapunov stability theory. The analytical results show that the proposed algorithm enables better high-precision tracking performance with chattering-free than traditional sliding mode control algorithm under various disturbances.

  2. Autonomous Traffic Control System Using Agent Based Technology

    CERN Document Server

    M, Venkatesh; V, Srinivas

    2011-01-01

    The way of analyzing, designing and building of real-time projects has been changed due to the rapid growth of internet, mobile technologies and intelligent applications. Most of these applications are intelligent, tiny and distributed components called as agent. Agent works like it takes the input from numerous real-time sources and gives back the real-time response. In this paper how these agents can be implemented in vehicle traffic management especially in large cities and identifying various challenges when there is a rapid growth of population and vehicles. In this paper our proposal gives a solution for using autonomous or agent based technology. These autonomous or intelligent agents have the capability to observe, act and learn from their past experience. This system uses the knowledge flow of precedent signal or data to identify the incoming flow of forthcoming signal. Our architecture involves the video analysis and exploration using some Intelligence learning algorithm to estimate and identify the...

  3. Preliminary analysis of the PreFlexMS molten salt once-through steam generator dynamics and control strategy

    Science.gov (United States)

    Trabucchi, Stefano; Casella, Francesco; Maioli, Tommaso; Elsido, Cristina; Franzini, Davide; Ramond, Mathieu

    2017-06-01

    Concentrated Solar Power plants (CSP) coupled with thermal storage have the potential to guarantee both flexible and continuous energy production, thus being competitive with conventional fossil fuel and hydro power plants, in terms of dispatchability and provision of ancillary services. Hence, the plant equipment and control design have to be focused on flexible operation on one hand, and on plant safety concerning the molten salt freezing on the other hand. The PreFlexMS European project aims to introduce a molten salt Once-Through Steam Generator (OTSG) within a Rankine cycle based power unit, a technology that has greater flexibility potential if compared to steam drum boilers, currently used in CSP plants. The dynamic modelling and simulation from the early design stages is, thus, of paramount importance, to assess the plant dynamic behavior and controllability, and to predict the achievable closed-loop dynamic performance, potentially saving money and time during the detailed design, construction and commissioning phases. The present paper reports the main results of the analysis carried out during the first part of the project, regarding the system analysis and control design. In particular, two different control systems have been studied and tested with the plant dynamic model: a decentralized control strategy based on PI controllers and a Linear Model Predictive Control (LMPC).

  4. Preliminary Design of Muses Control System Based on RT-Corba and Java

    CERN Document Server

    Tanabé, T; Ohnishi, J; Takano, M; Katayama, T; Tanabe, Toshiya; Masuoka, Toshikatsu; Ohnishi, Jun-ichi; Takano, Motonobu; Katayama, Takeshi

    2001-01-01

    Common Object Request Broker Architecture (CORBA) based control system has been utilized for the first phase of RIKEN-RI Beam Factory (RIBF) [1] at the developing stage. Software sharing with Jozef Stefan Institute (JSI) in Slovenia via CORBA/JavaBeans has been successfully demonstrated. Accelerator Beans (Abeans) [2] components developed in JDK1.2.2 have been ported to RIKEN's CORBA server. The second phase of the RIBF project is named "Multi-Use Experimental Storage rings" (MUSES) project, which includes an accumulator cooler ring (ACR) and collider rings. Due to the much larger number of controlled objects and more stringent timing requirement than the first-phase project, we contemplate using recently established real-time (RT) CORBA specification [3]. Summary of our efforts to test RT-CORBA with the existing JaveBeans components and other related subjects are described in this paper. [1] http://ribfweb1.riken.go.jp/ [2] http://kgb.ijs.si/KGB/ [3] http://www.omg.org/

  5. OLIVE PASTE CONSISTENCY AS A CONTROL PARAMETER FOR OIL EXTRACTION: A PRELIMINARY APPROACH

    Directory of Open Access Journals (Sweden)

    Piernicola Masella

    2008-09-01

    Full Text Available Malaxation is a critical step of olive oil extraction process as it can largely affect the extraction yield along with product quality. At present, malaxation control is based upon accumulated empirical results and the experience of the operators. There are evidences that this method rarely point out the olive-paste state suitable for oil extraction. The paper reports the results of a laboratory investigation aimed to verify the feasibility of using the olive paste consistency variation during malaxation as a parameter representing the right state for oil extraction. Olive pastes consistency evaluation was performed with a rotational rheometer. Oil extraction yield was evaluated by means of an extractability index (EI determined by laboratory centrifugation of the paste. The effect of different malaxation time and pastes humidity was investigated. Both malaxation time and humidity increments involve significant decrements of paste consistency and a simultaneous increase of EI. A good linear correlation among paste consistency and EI has been found, i.e. a large proportion of EI variance, about 90%, can be explained in terms of paste consistency variation during malaxation. The availability of a measurable parameter representing the paste state suitable for oil extraction could allow to implement a “closed-loop” control system for extraction yield maximization.

  6. A preliminary investigation of the effect of force variation for myoelectric control of hand prosthesis.

    Science.gov (United States)

    Al-Timemy, Ali H; Bugmann, Guido; Escudero, Javier; Outram, Nicholas

    2013-01-01

    The myoelectric control of prostheses has been an important area of research for the past 40 years. Significant advances have been achieved with Pattern Recognition (PR) systems regarding the number of movements to be classified with high accuracy. However, practical robustness still needs further research. This paper focuses on investigating the effect of the change in force levels by transradial amputee persons on the performance of PR systems. Two below-elbow amputee persons participated in the study. Three levels of forces (low, medium, and high) were recorded for different hand grips with the help of visual feedback from the Electromyography (EMG) signals. Results showed that changing the force level degraded the performance of the myoelectric control system by up to 60% with 12 EMG channels for 4 hand grips and a rest position. We investigated different EMG feature sets in combination with a Linear Discriminant Analysis (LDA) classifier. The performance was slightly better with Time Domain (TD) features compared to Auto Regression (AR) coefficients and Root Mean Square (RMS) features. Finally, the error of the classification was considerably reduced to approximately 17% when the PR system was trained with all force levels.

  7. Preliminary results from a four-working space, double-acting piston, Stirling engine controls model

    Science.gov (United States)

    Daniele, C. J.; Lorenzo, C. F.

    1980-01-01

    A four working space, double acting piston, Stirling engine simulation is being developed for controls studies. The development method is to construct two simulations, one for detailed fluid behavior, and a second model with simple fluid behaviour but containing the four working space aspects and engine inertias, validate these models separately, then upgrade the four working space model by incorporating the detailed fluid behaviour model for all four working spaces. The single working space (SWS) model contains the detailed fluid dynamics. It has seven control volumes in which continuity, energy, and pressure loss effects are simulated. Comparison of the SWS model with experimental data shows reasonable agreement in net power versus speed characteristics for various mean pressure levels in the working space. The four working space (FWS) model was built to observe the behaviour of the whole engine. The drive dynamics and vehicle inertia effects are simulated. To reduce calculation time, only three volumes are used in each working space and the gas temperature are fixed (no energy equation). Comparison of the FWS model predicted power with experimental data shows reasonable agreement. Since all four working spaces are simulated, the unique capabilities of the model are exercised to look at working fluid supply transients, short circuit transients, and piston ring leakage effects.

  8. New technologies in predicting, preventing and controlling emerging infectious diseases

    OpenAIRE

    Christaki, Eirini

    2015-01-01

    Surveillance of emerging infectious diseases is vital for the early identification of public health threats. Emergence of novel infections is linked to human factors such as population density, travel and trade and ecological factors like climate change and agricultural practices. A wealth of new technologies is becoming increasingly available for the rapid molecular identification of pathogens but also for the more accurate monitoring of infectious disease activity. Web-based surveillance to...

  9. Effective local control of vertebral metastases by simultaneous integrated boost radiotherapy. Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Lubgan, Dorota; Ziegaus, Anke; Semrau, Sabine; Lambrecht, Ulrike; Lettmaier, Sebastian; Fietkau, Rainer [Erlangen University Hospital, Department of Radiation Oncology, Erlangen (Germany)

    2014-11-14

    The primary endpoint was to improve local tumour control of patients with metastatic spinal tumours by stereotactic body radiotherapy (SBRT) and dose escalation by simultaneous, integrated boost (PTV-boost). We used a whole vertebral body (PTV-elective) contouring approach. Secondary endpoints were severity of acute and chronic adverse effects and overall survival. In all, 33 patients with metastases of the vertebral column were treated at Erlangen University Hospital. SBRT was given in 12 or 10 fractions. The metastatic lesion (PTV-boost) received 3.6 Gy (range 3.0-4.51 Gy) per fraction for a total of 42.0 Gy (24.36-48.0 Gy) and the whole vertebra (PTV-elective) received 2.85 Gy (range 1.8-3.6 Gy) per fraction for a total of 32.39 Gy (range 21.60-38.0 Gy). Patients were followed up every 3 months. Local control rate of all patients was 93 % at 12 and 24 months. The overall survival rate was 54 % at 12 months, 38 % at 24 months and 18 % at 36 months. No radiation myelopathy occurred. The most frequently observed adverse events in 3 cases was oesophagitis grade 2. SBRT with simultaneous, integrated boost was associated with excellent local control of 93 % after 24 months. This result shows the possibility of delivering escalated doses to the target while still keeping the incidence of side effects low. This study forms the basis for a future randomised controlled trial comparing conventional radiotherapy (10 fractions of 3 Gy) with hypofractionated dose intensified SBRT (12 fractions of 3 Gy + integrated boost 12 fractions of 4 Gy) for improvement of local tumour control and pain. (orig.) [German] Das primaere Ziel der Studie war die Verbesserung der lokalen Tumorkontrolle von Patienten mit Wirbelkoerpermetastasen mittels stereotaktischer Radiotherapie (SBRT) mit Dosiseskalation durch einen simultan integrierten Boost (PTV-Boost). Dabei wurde der ganze Wirbelkoerper konturiert (PTV-Elektive). Zu den sekundaeren Endpunkten der Studie gehoerten der Schweregrad von

  10. A mindfulness-based intervention to control weight after bariatric surgery: Preliminary results from a randomized controlled pilot trial.

    Science.gov (United States)

    Chacko, Sara A; Yeh, Gloria Y; Davis, Roger B; Wee, Christina C

    2016-10-01

    This study aimed to develop and test a novel mindfulness-based intervention (MBI) designed to control weight after bariatric surgery. Randomized, controlled pilot trial. Beth Israel Deaconess Medical Center, Boston, MA, USA. Bariatric patients 1-5 years post-surgery (n=18) were randomized to receive a 10-week MBI or a standard intervention. Primary outcomes were feasibility and acceptability of the MBI. Secondary outcomes included changes in weight, eating behaviors, psychosocial outcomes, and metabolic and inflammatory biomarkers. Qualitative exit interviews were conducted post-intervention. Major themes were coded and extracted. Attendance was excellent (6 of 9 patients attended ≥7 of 10 classes). Patients reported high satisfaction and overall benefit of the MBI. The intervention was effective in reducing emotional eating at 6 months (-4.9±13.7 in mindfulness vs. 6.2±28.4 in standard, p for between-group difference=0.03) but not weight. We also observed a significant increase in HbA1C (0.34±0.38 vs. -0.06±0.31, p=0.03). Objective measures suggested trends of an increase in perceived stress and symptoms of depression, although patients reported reduced stress reactivity, improved eating behaviors, and a desire for continued mindfulness-based support in qualitative interviews. This novel mindfulness-based approach is highly acceptable to bariatric patients post-surgery and may be effective for reducing emotional eating, although it did not improve weight or glycemic control in the short term. Longer-term studies of mindfulness-based approaches may be warranted in this population. ClinicalTrials.gov identifier NCT02603601. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Updated Meta-Analysis of Learner Control within Educational Technology

    Science.gov (United States)

    Karich, Abbey C.; Burns, Matthew K.; Maki, Kathrin E.

    2014-01-01

    Giving a student control over their learning has theoretical and intuitive appeal, but its effects are neither powerful nor consistent in the empirical literature base. This meta-analysis updated previous meta-analytic research by Niemiec, Sikorski, and Walberg by studying the overall effectiveness of providing learner control within educational…

  12. Programming Programmable Logic Controller. High-Technology Training Module.

    Science.gov (United States)

    Lipsky, Kevin

    This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

  13. Examination of motor unit control properties in stroke survivors using surface EMG decomposition: a preliminary report.

    Science.gov (United States)

    Suresh, Nina; Li, Xiaoyan; Zhou, Ping; Rymer, William Zev

    2011-01-01

    The objective of this pilot study was to examine alterations in motor unit (MU) control properties, (i.e. MU recruitment and firing rate) after stroke utilizing a recently developed high-yield surface electromyogram (EMG) decomposition technique. Two stroke subjects participated in this study. A sensor array was used to record surface EMG signals from the first dorsal interosseous (FDI) muscle during voluntary isometric contraction at varying force levels. The recording was performed in both paretic and contralateral muscles using a matched force protocol. Single motor unit activity was extracted using the surface EMG decomposition software from Delsys Inc. The results from the two stroke subjects indicate a reduction in the mean motor unit firing rate and a compression of motor unit recruitment range in paretic muscle as compared with the contralateral muscles. These findings provide further evidence of spinal motoneuron involvement after a hemispheric brain lesion, and help us to understand the complex origins of stroke induced muscle weakness.

  14. Arms Control and nonproliferation technologies: Technology options and associated measures for monitoring a Comprehensive Test Ban, Second quarter

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Leslie A.

    1994-01-01

    This newsletter contains reprinted papers discussing technology options and associated measures for monitoring a Comprehensive Test Ban Treaty (CTBT). These papers were presented to the Conference on Disarmament (CD) in May and June 1994. An interagency Verification Monitoring Task Force developed the papers. The task force included participants from the Arms Control and Disarmament Agency, the Department of Defense, the Department of Energy, the Intelligence Community, the Department of Interior, and the Department of State. The purpose of this edition of Arms Control and Nonproliferation Technologies is to share these papers with the broad base of stakeholders in a CTBT and to facilitate future technology discussions. The papers in the first group discuss possible technology options for monitoring a CTBT in all environments (underground, underwater, atmosphere, and space). These technologies, along with on-site inspections, would facilitate CTBT monitoring by treaty participants. The papers in the second group present possible associated measures, e.g., information exchanges and transparency measures, that would build confidence among states participating in a CTBT.

  15. Preliminary study on hazards and critical control points of kokoro, a Nigerian indigenous fermented maize snack.

    Science.gov (United States)

    Oranusi, S; Dahunsi, S O

    2015-01-01

    The microbial and proximate composition of an indigenous snack from fermented maize was investigated. Critical control points of milling the raw materials, fermentation pH, processing temperature and time intervals during holdings in processing and storage were evaluated with a view to optimizing the product. The mean total aerobic plate count (TAPC) log10 values for samples of the finished products range from 2.07 ± 0.50 to 4.36 ± 0.10 cfu/g. Mean fungi count log10 was 2.00 ± 0.00 to 3.50 ± 0.50 while mean coliform count 1.04 ± 0.10 log10 cfu/g was detected in one of the sales outlets investigated. Bacterial and fungal species were isolated belonging to the genera Aspergillus, Rhizopus, Penicillium, Fusarium, Cephalosporium, Alternaria, Bacillus, Klebsiella, Staphylococcus, Lactobacillus, Pseudomonas, Proteus and Enterobacter. The moisture content of the samples ranged from 3.41 to 6.75%; fat content was 19.68 to 32.59%; fiber content was 1.84 to 2.78% while protein ranged from 6.76 to 9.23%. The ash and carbohydrate contents ranged from 1.97 to 2.31% and 49.21 to 61.96%, respectively. Based on the specifications by International Commission for Microbiological Specification for Foods (ICMSF), the TAPC counts of the finished products remained at low levels. However, presence of coliforms could prejudice the hygienic quality of these types of products hence, the need for quality control.

  16. [Development of external quality control protocol for CyberKnife beams dosimetry: preliminary tests multicentre].

    Science.gov (United States)

    Guinement, L; Marchesi, V; Veres, A; Lacornerie, T; Buchheit, I; Peiffert, D

    2013-01-01

    To develop an external quality control procedure for CyberKnife(®) beams. This work conducted in Nancy, has included a test protocol initially drawn by the medical physicist of Nancy and Lille in collaboration with Equal-Estro Laboratory. A head and neck anthropomorphic phantom and a water-equivalent homogeneous cubic plastic test-object, so-called "MiniCube", have been used. Powder and solid thermoluminescent dosimeters as well as radiochromic films have been used to perform absolute and relative dose studies, respectively. The comparison between doses calculated by Multiplan treatment planning system and measured doses have been studied in absolute dose. The dose distributions measured with films and treatment planning system calculations have been compared via the gamma function, configured with different tolerance criteria. This work allowed, via solid thermoluminescent dosimeter measurements, verifying the beam reliability with a reproducibility of 1.7 %. The absolute dose measured in the phantom irradiated by the seven participating centres has shown an error inferior to the standard tolerance limits (± 5 %), for most of participating centres. The relative dose measurements performed at Nancy and by the Equal-Estro laboratory allowed defining the most adequate parameters for gamma index (5 %/2mm--with at least 95 % of pixels satisfying acceptability criteria: γsoftware. This work allowed defining a dosimetric external quality control for CyberKnife(®) systems, based on a reproducible irradiation plan through measurements performed with thermoluminescent dosimeters and radiochromic films. This protocol should be validated by a new series of measurement and taking into account the lessons of this work. Copyright © 2013 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

  17. Flexible spacecraft dynamics, control and guidance technologies by giovanni campolo

    CERN Document Server

    Mazzini, Leonardo

    2016-01-01

    This book is an up-to-date compendium on spacecraft attitude and orbit control (AOC) that offers a systematic and complete treatment of the subject with the aim of imparting the theoretical and practical knowledge that is required by designers, engineers, and researchers. After an introduction on the kinematics of the flexible and agile space vehicles, the modern architecture and functions of an AOC system are described and the main AOC modes reviewed with possible design solutions and examples. The dynamics of the flexible body in space are then considered using an original Lagrangian approach suitable for the control applications of large space flexible structures. Subsequent chapters address optimal control theory, attitude control methods, and orbit control applications, including the optimal orbital transfer with finite and infinite thrust. The theory is integrated with a description of current propulsion systems, with the focus especially on the new electric propulsion systems and state of the art senso...

  18. Developing Effluent Analysis Technologies to Support Nonproliferation Initiatives, Arms Control and Nonproliferation Technologies, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, S A; Staehle, G; Alonzo, G M [eds.

    1995-01-01

    This issue provides an overview of the Effluent Research Program of the DOE Office of Research and Development, highlighting a number of representative projects within this program in support of nonproliferation initiatives. Technologies reported include portable instruments for on-site inspections, standoff detectors, fieldable, real-time instruments, field collection techniques, and ultrasensitive laboratory techniques.

  19. Method to control depth error when ablating human dentin with numerically controlled picosecond laser: a preliminary study.

    Science.gov (United States)

    Sun, Yuchun; Yuan, Fusong; Lv, Peijun; Wang, Dangxiao; Wang, Lei; Wang, Yong

    2015-07-01

    A three-axis numerically controlled picosecond laser was used to ablate dentin to investigate the quantitative relationships among the number of additive pulse layers in two-dimensional scans starting from the focal plane, step size along the normal of the focal plane (focal plane normal), and ablation depth error. A method to control the ablation depth error, suitable to control stepping along the focal plane normal, was preliminarily established. Twenty-four freshly removed mandibular first molars were cut transversely along the long axis of the crown and prepared as 48 tooth sample slices with approximately flat surfaces. Forty-two slices were used in the first section. The picosecond laser was 1,064 nm in wavelength, 3 W in power, and 10 kHz in repetition frequency. For a varying number (n = 5-70) of focal plane additive pulse layers (14 groups, three repetitions each), two-dimensional scanning and ablation were performed on the dentin regions of the tooth sample slices, which were fixed on the focal plane. The ablation depth, d, was measured, and the quantitative function between n and d was established. Six slices were used in the second section. The function was used to calculate and set the timing of stepwise increments, and the single-step size along the focal plane normal was d micrometer after ablation of n layers (n = 5-50; 10 groups, six repetitions each). Each sample underwent three-dimensional scanning and ablation to produce 2 × 2-mm square cavities. The difference, e, between the measured cavity depth and theoretical value was calculated, along with the difference, e 1, between the measured average ablation depth of a single-step along the focal plane normal and theoretical value. Values of n and d corresponding to the minimum values of e and e 1, respectively, were obtained. In two-dimensional ablation, d was largest (720.61 μm) when n = 65 and smallest when n = 5 (45.00 μm). Linear regression yielded the quantitative

  20. Review on Application of Electromagnetic Theory and Technology to Forest Pests Control

    Institute of Scientific and Technical Information of China (English)

    WANG Xiangfeng; QU Zhiwei; LIANG Jun

    2006-01-01

    Many domestic and international scholars have done a wide range of researches on electromagnetic theory and technology and have made some achievements. Electromagnetic technology has been used in forest pests control as a convenient and high-efficient physics means. This article summarizes the current study of the electromagnetic biological effect and introduces the application of microwave, pulsed electromagnetic field and electrostatic field to forest pests control. The research direction and prospect of the application of electromagnetic theory and technology to forest pests control are also discussed.

  1. Habit reversal training and educational group treatments for children with tourette syndrome: A preliminary randomised controlled trial.

    Science.gov (United States)

    Yates, Rachel; Edwards, Katie; King, John; Luzon, Olga; Evangeli, Michael; Stark, Daniel; McFarlane, Fiona; Heyman, Isobel; İnce, Başak; Kodric, Jana; Murphy, Tara

    2016-05-01

    Quality of life of children with Tourette Syndrome (TS) is impacted greatly by its symptoms and their social consequences. Habit Reversal Training (HRT) is effective but has not, until now, been empirically evaluated in groups. This randomised controlled trial evaluated feasibility and preliminary efficacy of eight HRT group sessions compared to eight Education group sessions. Thirty-three children aged 9-13 years with TS or Chronic Tic Disorder took part. Outcomes evaluated were tic severity and quality of life (QoL). Tic severity improvements were found in both groups. Motor tic severity (Yale Global Tic Severity Scale) showed greatest improvements in the HRT group. Both groups showed a strong tendency toward improvements in patient reported QoL. In conclusion, group-based treatments for TS are feasible and exposure to other children with tics did not increase tic expression. HRT led to greater reductions in tic severity than Education. Implications, such as cost-effectiveness of treatment delivery, are discussed.

  2. A preliminary investigation of the environmental Control and Life Support Subsystems (EC/LSS) for animal and plant experiment payloads

    Science.gov (United States)

    Wells, H. B.

    1972-01-01

    A preliminary study of the environmental control and life support subsystems (EC/LSS) necessary for an earth orbital spacecraft to conduct biological experiments is presented. The primary spacecraft models available for conducting these biological experiments are the space shuttle and modular space station. The experiments would be housed in a separate module that would be contained in either the shuttle payload bay or attached to the modular space station. This module would be manned only for experiment-related tasks, and would contain a separate EC/LSS for the crew and animals. Metabolic data were tabulated on various animals that are considered useful for a typical experiment program. The minimum payload for the 30-day space shuttle module was found to require about the equivalent of a one-man EC/LSS; however, the selected two-man shuttle assemblies will give a growth and contingency factor of about 50 percent. The maximum payloads for the space station mission will require at least a seven-man EC/LSS for the laboratory colony and a nine-man EC/LSS for the centrifuge colony. There is practically no room for growth or contingencies in these areas.

  3. Advanced Electric Distribution, Switching, and Conversion Technology for Power Control

    Science.gov (United States)

    Soltis, James V.

    1998-01-01

    The Electrical Power Control Unit currently under development by Sundstrand Aerospace for use on the Fluids Combustion Facility of the International Space Station is the precursor of modular power distribution and conversion concepts for future spacecraft and aircraft applications. This unit combines modular current-limiting flexible remote power controllers and paralleled power converters into one package. Each unit includes three 1-kW, current-limiting power converter modules designed for a variable-ratio load sharing capability. The flexible remote power controllers can be used in parallel to match load requirements and can be programmed for an initial ON or OFF state on powerup. The unit contains an integral cold plate. The modularity and hybridization of the Electrical Power Control Unit sets the course for future spacecraft electrical power systems, both large and small. In such systems, the basic hybridized converter and flexible remote power controller building blocks could be configured to match power distribution and conversion capabilities to load requirements. In addition, the flexible remote power controllers could be configured in assemblies to feed multiple individual loads and could be used in parallel to meet the specific current requirements of each of those loads. Ultimately, the Electrical Power Control Unit design concept could evolve to a common switch module hybrid, or family of hybrids, for both converter and switchgear applications. By assembling hybrids of a common current rating and voltage class in parallel, researchers could readily adapt these units for multiple applications. The Electrical Power Control Unit concept has the potential to be scaled to larger and smaller ratings for both small and large spacecraft and for aircraft where high-power density, remote power controllers or power converters are required and a common replacement part is desired for multiples of a base current rating.

  4. Preliminary safety analysis of the B-C Cribs Controlled Area. [Hanford Reservation

    Energy Technology Data Exchange (ETDEWEB)

    Maxfield, H.L.

    1974-07-31

    Approximately 2,000 acres of land in the center of the Hanford Reservation is contaminated with an estimated 14 Ci of /sup 137/Cs and 81 Ci of /sup 90/Sr associated with animal wastes. Approximately half of this activity is located on (or within) 2.5 centimeters of the ground surface. The source of the contamination was the B-C Cribs and trenches which were used as liquid radioactive waste disposal sites during the 1950's. The mechanism for movement of radionuclides from the disposal site to the ground surface is believed to have been burrowing by an animal (probably a badger) followed by use of the exposed material as a salt lick by rabbits and other animals. When the radioactivity was discovered, the burrow was sealed, the contaminated site was classed as a radiation zone, and surveillance initiated. The contamination site has not been a significant hazard to employees at the plant or to the public. The Atlantic Richfield Hanford Company maintained control over the surface contamination by isolation, zoning, and by continued surveillance. Methods of handling the contaminated area have been considered. Discussions of these alternatives and applicable safety analysis information are included in this document.

  5. Preliminary observation on the effect of baking soda volume on controlling odour from discarded organic waste.

    Science.gov (United States)

    Qamaruz-Zaman, N; Kun, Y; Rosli, R-N

    2015-01-01

    Food wastes with high moisture and organic matter content are likely to emit odours as a result of the decomposition process. The management of odour from decomposing wastes is needed to sustain the interest of residents and local councils in the source separation of kitchen wastes. This study investigated the potential of baking soda (at 50 g, 75 g and 100g per kg food waste) to control odour from seven days stored food waste. It was found that 50 g of baking soda, spread at the bottom of 8l food wastes bin, can reduce the odour by about 70%. A higher amount (above 100g) is not advised as a pH higher than 9.0 may be induced leading to the volatilization of odorous ammonia. This research finding is expected to benefit the waste management sector, food processing industries as well as the local authorities where malodour from waste storage is a pressing issue. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Preliminary Study on Controlling Black Fungi Dwelling on Stone Monuments by Using a Microwave Heating System

    Directory of Open Access Journals (Sweden)

    Oana-Adriana CUZMAN

    2013-06-01

    Full Text Available Microcolonial black fungi have their natural ecological niche on rocks and walls of hypogean environments, playing an important role in the deterioration of materials and aesthetical alteration of monumental stones and mortars. Three black fungi (Sarcinomyces sp., Pithomyces sp. and Scolecobasidium sp. have been isolated from cultural assets of historical interest. These fungal strains have been used to test the microwave heating method as a new control methodology for eradicating the fungal biological growth on cultural stone artifacts. This methodology is based on a 2.45 GHz microwave electromagnetic radiation, generated by a new apparatus with an appropriate applicator. The first results showed the best dose of 65°C for three minutes, for all the investigated fungal strains. This methodology is very promising because is safety for the operator and the environment, and can be easily applied on site. The use of this method to kill biodeteriogens can avoid the application of chemicals formulates potentially dangerous for substrates and environment.

  7. Preliminary Results On The Use Of Clay To Control Pyrodinium Bloom - A Mitigation Strategy

    Directory of Open Access Journals (Sweden)

    Larry Padilla

    2006-06-01

    Full Text Available The frequent and expanded occurrence of Pyrodinium bahamense var compressum blooms in thePhilippines since 1983 has prompted the need to find mechanisms to control the harmful effects of thesetoxic dinoflagellates. A promising method now being explored is the use of powdered clay mineralswhich when added to the growth media is capable of flocculating with the algal cells. In this study, theefficiency of ball clay, brown bentonite, and Malampaya Sound sediments to remove Pyrodinium cellsin seawater was tested. The addition of 1 g/L of suspended ball clay to 50 mL of cultured Pyrodiniumcells (~1.037 x106 cells/L removed 99.56% of the algal cells after 2.5 hours. Prolonging the exposuretime to 5 and 24 hours showed no significant increase in flocculation. Brown bentonite and MalampayaSound sediments showed low to moderate removal efficiency not exceeding 70% and 50%, respectively.The effect of ball clay addition on seawater chemistry showed no change in ammonia concentration butnitrate decreased after 5 and 24 hours of clay addition. Results for nitrite and phosphate were howevermore variable.

  8. Parenchymal texture measures weighted by breast anatomy: preliminary optimization in a case-control study

    Science.gov (United States)

    Gastounioti, Aimilia; Keller, Brad M.; Hsieh, Meng-Kang; Conant, Emily F.; Kontos, Despina

    2016-03-01

    Growing evidence suggests that quantitative descriptors of the parenchymal texture patterns hold a valuable role in assessing an individual woman's risk for breast cancer. In this work, we assess the hypothesis that breast cancer risk factors are not uniformly expressed in the breast parenchymal tissue and, therefore, breast-anatomy-weighted parenchymal texture descriptors, where different breasts ROIs have non uniform contributions, may enhance breast cancer risk assessment. To this end, we introduce an automated breast-anatomy-driven methodology which generates a breast atlas, which is then used to produce a weight map that reinforces the contributions of the central and upper-outer breast areas. We incorporate this methodology to our previously validated lattice-based strategy for parenchymal texture analysis. In the framework of a pilot case-control study, including digital mammograms from 424 women, our proposed breast-anatomy-weighted texture descriptors are optimized and evaluated against non weighted texture features, using regression analysis with leave-one-out cross validation. The classification performance is assessed in terms of the area under the curve (AUC) of the receiver operating characteristic. The collective discriminatory capacity of the weighted texture features was maximized (AUC=0.87) when the central breast area was considered more important than the upperouter area, with significant performance improvement (DeLong's test, p-valuepersonalized recommendations regarding women's cancer risk evaluation.

  9. Age-related differences in control of a visuomotor coordination task: a preliminary study.

    Science.gov (United States)

    Ryu, Young Uk; Lee, Kyu-Ho; Lee, Hocheol; Park, Jungsik

    2016-04-01

    [Purpose] The purpose of the current study was to examine age-related differences in control of a perception-action coordination skill. We adapted a visuomotor tracking experiment requiring various coordination patterns between a limb's motion and an external signal. [Subjects and Methods] A total of 12 subjects (6 elderly and 6 young) voluntarily participated in the study. The experimental session consisted of 3 trials for 3 different relative phase patterns: 0°, 90°, and 180°, defined by the relationship between the online visual feedback of the joystick motion and the white dot signal. [Results] The 0° and 180° tracking patterns were stable compared with the 90° tracking pattern for both age groups. The present results also showed that the elderly subjects were less stable than were young subjects for all tracking patterns. [Conclusion] The intrinsic coordination dynamics predicted by the Haken-Kelso-Bunz (HKB) mathematical model did not change with age, whereas utilization of visual feedback information declined overall. Further research is needed regarding methods for increasing utilization of visual feedback information from the perspective of rehabilitation.

  10. Preliminary observation on the effect of baking soda volume on controlling odour from discarded organic waste

    Energy Technology Data Exchange (ETDEWEB)

    Qamaruz-Zaman, N., E-mail: cenastaein@usm.my; Kun, Y.; Rosli, R.-N.

    2015-01-15

    Highlights: • Approximately 50 g baking soda reduced odour concentration by 70%. • Reducing volatile acid concentration reduces odour concentration. • Ammonia has less effect on odour concentration. - Abstract: Food wastes with high moisture and organic matter content are likely to emit odours as a result of the decomposition process. The management of odour from decomposing wastes is needed to sustain the interest of residents and local councils in the source separation of kitchen wastes. This study investigated the potential of baking soda (at 50 g, 75 g and 100 g per kg food waste) to control odour from seven days stored food waste. It was found that 50 g of baking soda, spread at the bottom of 8 l food wastes bin, can reduce the odour by about 70%. A higher amount (above 100 g) is not advised as a pH higher than 9.0 may be induced leading to the volatilization of odorous ammonia. This research finding is expected to benefit the waste management sector, food processing industries as well as the local authorities where malodour from waste storage is a pressing issue.

  11. Rogue athletes and recombinant DNA technology: challenges for doping control.

    Science.gov (United States)

    Azzazy, Hassan M E; Mansour, Mai M H

    2007-10-01

    The quest for athletic excellence holds no limit for some athletes, and the advances in recombinant DNA technology have handed these athletes the ultimate doping weapons: recombinant proteins and gene doping. Some detection methods are now available for several recombinant proteins that are commercially available as pharmaceuticals and being abused by dopers. However, researchers are struggling to come up with efficient detection methods in preparation for the imminent threat of gene doping, expected in the 2008 Olympics. This Forum article presents the main detection strategies for recombinant proteins and the forthcoming detection strategies for gene doping as well as the prime analytical challenges facing them.

  12. Surface chemistry: Key to control and advance myriad technologies

    Science.gov (United States)

    Yates, John T.; Campbell, Charles T.

    2011-01-01

    This special issue on surface chemistry is introduced with a brief history of the field, a summary of the importance of surface chemistry in technological applications, a brief overview of some of the most important recent developments in this field, and a look forward to some of its most exciting future directions. This collection of invited articles is intended to provide a snapshot of current developments in the field, exemplify the state of the art in fundamental research in surface chemistry, and highlight some possibilities in the future. Here, we show how those articles fit together in the bigger picture of this field. PMID:21245359

  13. Aircraft Control Augmentation and Health Monitoring Using FADS Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I research proposal is aimed at demonstrating the feasibility of an innovative architecture comprising control augmentation and on-line health monitoring...

  14. The HVAC Control Technology Making Energy Saving Compatible with Comfort

    National Research Council Canada - National Science Library

    高木, 康夫; 米沢, 憲造; 村山, 大; 西村, 信孝; 花田, 雄一; 山崎, 謙一

    2010-01-01

    .... The method is mainly focused on the compatibility of energy savings and comfort. The energy saving is achieved through the next generation air handling unit that controls room humidity without energy loss and the optimal operation of HVAC...

  15. Characterization of the CTS 12 and 14 GHz communications links - Preliminary measurements and evaluation. [Communications Technology Satellite

    Science.gov (United States)

    Ippolito, L. J.

    1976-01-01

    The Communications Link Characterization Experiment is designed to characterize the radio frequency links of the Communications Technology Satellite. The experiment is twofold: (1) it will study the natural characteristics in the CTS frequency bands (14 GHz uplink, and 12 GHz downlink) including attenuation and signal degradation due primarily to absorption and scattering induced by precipitation, and (2) it will perform environmental measurements for the characterization of man-made, earth-based signals which could interfere with the uplink frequency bands of the satellite.

  16. Microcontroller Based Home Security and Load Controlling Using Gsm Technology

    OpenAIRE

    Mustafijur Rahman; A. H. M. Zadidul Karim; Sultanur Nyeem; Faisal Khan; Golam Matin

    2015-01-01

    "Home automation" referred to as 'Intelligent home' or 'automated home', indicates the automation of daily tasks with electrical devices used in homes. This could be the control of lights or more complex chores such as remote viewing of the house interiors for surveillance purposes. The emerging concept of smart homes offers a comfortable, convenient and safe and secure environment for occupants. These include automatic load controlling, fire detection, temperature sensing, and motion detecti...

  17. A single-session preliminary evaluation of an affordable BCI-controlled arm exoskeleton and motor-proprioception platform

    Directory of Open Access Journals (Sweden)

    Ahmed Mohamed Elnady

    2015-03-01

    Full Text Available Traditional, hospital-based stroke rehabilitation can be labour-intensive and expensive. Furthermore, outcomes from rehabilitation are inconsistent across individuals and recovery is hard to predict. Given these uncertainties, numerous technological approaches have been tested in an effort to improve rehabilitation outcomes and reduce the cost of stroke rehabilitation. These techniques include brain-computer interface (BCI, robotic exoskeletons, functional electrical stimulation (FES, and proprioceptive feedback. However, to the best of our knowledge, no studies have combined all these approaches into a rehabilitation platform that facilitates goal-directed motor movements. Therefore, in this paper, we combined all these technologies to test the feasibility of using a BCI-driven exoskeleton with FES (robotic training device to facilitate motor task completion among individuals with stroke. The robotic training device operated to assist a predefined goal-directed motor task. Because it is hard to predict who can utilize this type of technology, we considered whether the ability to adapt skilled movements with proprioceptive feedback would predict who could learn to control a BCI driven robotic device. To accomplish this aim, we developed a motor task that requires proprioception for completion to assess motor-proprioception ability. Next, we tested the feasibility of robotic training system in individuals with chronic stroke (n = 9 and found that the training device was well tolerated by all the participants. Ability on the motor-proprioception task did not predict the time to completion of the BCI driven task. Both participants who could accurately target (n = 6 and those who could not (n = 3, were able to learn to control the BCI device, with each BCI trial lasting on average 2.47 minutes. Our results showed that the participants’ ability to use proprioception to control motor output did not affect their ability to use the BCI

  18. Technology Integration in the LHC EXperiments Joint Controls Project

    Institute of Scientific and Technical Information of China (English)

    R.Barillere; M.Beharrell; 等

    2001-01-01

    The development and maintenance of the control systems of the four LHC experiments will require a non-negligible amount of resources and effort.The Joint Controls Project(JCOP)[1] has been set-up as a collaboration between CERN and the four LHC experiments to find common solutions for the LHC experiments' control systems.Although the JCOP general principle is to promote the use of industrial ssoluitions wherever possible,custom solutions are still required when non-standard devices or very large numbers of devices have to be controlled.Furthermore.to ease the development and integration of both standard and non-standard devices into the control system a number of software Frameworks are under development.This paper will describe the various solutions being proposed by JCOP including the Supervisory and Front-End frameworks as well as the various industrial and custom components.In addition,It will also describe where these fit into the foreseen JCOP controls architecture.The paper will then highlight in more detail the Front-End Framework.

  19. Effect of Intravenous Iron Supplementation on Acute Mountain Sickness: A Preliminary Randomized Controlled Study.

    Science.gov (United States)

    Ren, Xuewen; Zhang, Qiuying; Wang, Hao; Man, Chunyan; Hong, Heng; Chen, Li; Li, Tanshi; Ye, Ping

    2015-07-15

    The aim of this study was to assess the role of intravenous iron supplementation in the prevention of AMS. This was a randomized, double-blinded, placebo-controlled study. Forty-one (n=41) healthy Chinese low-altitude inhabitants living in Beijing, China (altitude of about 50 meters) were randomly assigned into intravenous iron supplementation (ISS group; n=21) and placebo (CON group; n=20) groups. Participants in the ISS group received iron sucrose supplement (200 mg) before flying to Lhasa, China (altitude of 4300 meters). Acute mountain sickness (AMS) severity was assessed with the Lake Louise scoring (LLS) system within 5 days after landing on the plateau (at high altitude). Routine check-ups, clinical biochemistry, and blood tests were performed before departure and 24 h after arrival. A total of 38 participants completed the study (ISS group: n=19; CON group: n=19). The rate of subjects with AMS (LLS>3) was lower in the ISS group compared with the CON group, but no significant differences were obtained (P>0.05). There were no differences in patients' baseline characteristics. The physiological indices were similar in both groups except for serum iron concentrations (19.44±10.02 vs. 85.10±26.78 μmol/L) and transferrin saturation rates (28.20±12.14 vs. 68.34±33.12%), which were significantly higher in the ISS group (Piron supplementation has no significant protective effect on AMS in healthy Chinese low-altitude inhabitants.

  20. Evaluation of environmental control technologies for magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The peripheral magnetic fields of several energy-related technologies are calculated, and shielding options are studied for three field intensities as possible exposure levels: 200 G, 10 G, and 0.3 G. Seven fusion reactor designs are studied. For a 200-G field level, shielding is not required. For the 10- and 0.3-G levels, land is the most economical shielding method, with shield coils an acceptable alternative at 0.3 G. Nonnuclear technologies studied are superconducting magnetic energy storage, magnetohydrodynamic (MHD) electric generators, magnetically levitated vehicles, superconducting ac generators, and underground transmission lines. Superconducting ac generators and underground transmission lines require no shielding. The superconducting magnetic energy storage coil requires no shielding for 200 G. Both a shield coil and land are needed to meet 10 G or 0.3 G. The MHD generator needs no shielding to 200 G and 10 G. Land is the most economical means of meeting the 0.3 G level. Most of the magnetically levitated vehicles require no shielding to 200 G. The field on-board can be reduced from 200 to 25 G, depending upon the vehicle design, with shield coils. The use of iron, or another permeable material, is necessary to reduce the field to 10 G or 0.3 G. However, iron introduces too much added weight to allow efficient operation.

  1. Control of odontogenic pain by diclofenac and meloxicam mucoadhesive patches: A randomized, double-blinded, placebo-controlled, preliminary study

    Directory of Open Access Journals (Sweden)

    Pratik R Pipalia

    2016-01-01

    Full Text Available Aims and Objectives: To evaluate and compare the efficacy of diclofenac and meloxicam as mucoadhesive patches in dental pain management. Materials and Method: This study was conducted among 45 adult patients of either sex, who were diagnosed with dental pain and were attending the outpatient department. Written informed consent was obtained from all the patients. A 1 × 1 cm2 mucoadhesive patch of any one (diclofenac, meloxicam or placebo was applied on the attached gingival region of the tooth with pain. Pain was recorded using a ten point visual analog scale (VAS score at every 5 min for 30 min. Pain was measured and compared before and after the application of the patch. Results: The results showed that patients with diclofenac patch gained mean pain reduction from 6 ± 1.54 mm to 2.60 ± 1.32 mm after 30 min (P 0.05. The maximum pain reduction was seen with meloxicam patch. Conclusion: Transmucosal mucoadhesive analgesic patches are a better alternative to oral analgesics to control dental pain. Hence, routine use of mucoadhesive analgesic patch for dental pain reduction is recommended in day to day practice.

  2. Preliminary Experimental Examination Of Controls On Methane Expulsion During Melting Of Natural Gas Hydrate Systems

    Science.gov (United States)

    Kneafsey, T. J.; Flemings, P. B.; Bryant, S. L.; You, K.; Polito, P. J.

    2013-12-01

    Global climate change will cause warming of the oceans and land. This will affect the occurrence, behavior, and location of subseafloor and subterranean methane hydrate deposits. We suggest that in many natural systems local salinity, elevated by hydrate formation or freshened by hydrate dissociation, may control gas transport through the hydrate stability zone. We are performing experiments and modeling the experiments to explore this behavior for different warming scenarios. Initially, we are exploring hydrate association/dissociation in saline systems with constant water mass. We compare experiments run with saline (3.5 wt. %) water vs. distilled water in a sand mixture at an initial water saturation of ~0.5. We increase the pore fluid (methane) pressure to 1050 psig. We then stepwise cool the sample into the hydrate stability field (~3 degrees C), allowing methane gas to enter as hydrate forms. We measure resistivity and the mass of methane consumed. We are currently running these experiments and we predict our results from equilibrium thermodynamics. In the fresh water case, the modeled final hydrate saturation is 63% and all water is consumed. In the saline case, the modeled final hydrate saturation is 47%, the salinity is 12.4 wt. %, and final water saturation is 13%. The fresh water system is water-limited: all the water is converted to hydrate. In the saline system, pore water salinity is elevated and salt is excluded from the hydrate structure during hydrate formation until the salinity drives the system to three phase equilibrium (liquid, gas, hydrate) and no further hydrate forms. In our laboratory we can impose temperature gradients within the column, and we will use this to investigate equilibrium conditions in large samples subjected to temperature gradients and changing temperature. In these tests, we will quantify the hydrate saturation and salinity over our meter-long sample using spatially distributed temperature sensors, spatially distributed

  3. Biomass accumulation in hydroponically grown sweetpotato in a controlled environment: a preliminary study

    Science.gov (United States)

    Hill, J.; Douglas, D.; David, P.; Mortley, D.; Trotman, A.; Bonsi, C.

    1996-01-01

    In the development of a plant growth model, the assumptions made and the general equations representing an understanding of plant growth are gradually refined as more information is acquired through experimentation. One such experiment that contributed to sweetpotato model development consisted of measuring biomass accumulation of sweetpotato grown in hydroponic culture in a plant growth chamber. Plants were started from fifteen centimeter long 'TU-82-155' sweetpotato vine cuttings spaced 25 cm apart in each of 18 rectangular growing channels (0.15 by 0.15 by 1.2m) in a system designed to use the nutrient film technique (NFT). Each channel contained four plants. The 3.5m by 5.2m plant growth chamber environmental parameters included an 18h photoperiod, 500 micromoles m-2 s-1 of photosynthetic photon flux (PPF), and a diurnal light/dark temperature of 28 degrees C/22 degrees C. The relative humidity was 80 +/- 5% and the CO2 partial pressure was ambient (350 ppm). The nutrient solution contained in 30L reservoirs was a modified half Hoagland's solution with a 1:2.4 N:K ratio and a pH of 6.2. Solution replenishment occurred when the electrical conductivity (EC) level dropped below 1050. Plants were harvested at 15 days after planting (DAP) and weekly thereafter until day 134. By 57 DAP, stems and fibrous roots had acquired 90% of their total dry biomass, while leaves had reached 84% of their maximum dry biomass. Beginning at 64 DAP dry biomass accumulation in the storage roots dominated the increase in dry biomass for the plants. Dry weight of storage roots at 120 DAP was 165 g/plant or 1.1 kg/m2. Resulting growth curves were consistent with the physiological processes occurring in the plant. Results from this study will be incorporated in a plant growth model for use in conjunction with controlled life support systems for long-term manned space missions.

  4. Energy storage technology - Environmental implications of large scale utilization

    Science.gov (United States)

    Krupka, M. C.; Moore, J. E.; Keller, W. E.; Baca, G. A.; Brasier, R. I.; Bennett, W. S.

    Environmental effects are identified for several energy storage technologies including advanced lead-acid battery, compressed air, underground pumped hydroelectric, flywheel, superconducting magnet, and various thermal systems. A preliminary study on fuel cell technology is also reported. New applications for energy storage technologies and the additional costs of controls to be used for mitigation of specific impacts are briefly discussed.

  5. Application of Model-Checking Technology to Controller Synthesis

    DEFF Research Database (Denmark)

    David, Alexandre; Grunnet, Jacob Deleuran; Jessen, Jan Jacob

    2011-01-01

    its continuous environment, which is modelled and taken care of in our frameworks. Our first technique does it by using Matlab to discretise the problem and then Uppaal-tiga to solve the obtained timed game. This is implemented as a toolbox. The second technique relies on the user defining a timed......In this paper we present two frameworks that have been implemented to link traditional model-checking techniques to the domain of control. The techniques are based on solving a timed game and using the resulting solution (a strategy) as a controller. The obtained discrete controller must fit within...... game model in Uppaal- tiga. Then the strategy is automatically imported in Simulink as an S-function for simulation and validation purposes. We demonstrate the effectiveness of these frameworks in different case-studies....

  6. Methodology for Selection of Non-Restored Reserved Systems Pertaining to Control of Technological Processes

    Directory of Open Access Journals (Sweden)

    V. A. Anischenko

    2008-01-01

    Full Text Available The paper contains analysis of reliability of non-restored passive reserved systems pertaining to control of technological processes. Criteria have been justified and methodology for optimum selection of reserved systems has been developed.

  7. 78 FR 49766 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Commission...

    Science.gov (United States)

    2013-08-15

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Products Containing Interactive Program Guide and Parental Control Technology; Commission... public inspection at the Office of the Secretary and on EDIS. The authority for the Commission's...

  8. INTEGRATION OF INFORMATIONAL COMPUTER TECHNOLOGIES SMK: AUTOMATION OF THE MAIN FUNCTIONS OF THE TECHNICAL CONTROL DEPARTMENT

    Directory of Open Access Journals (Sweden)

    S. A. Pavlenko

    2010-01-01

    Full Text Available It is shown that automation of some functions of control department allows to record defects, reclamations and failures of technology, to make the necessary reporting forms and quality certificates for production.

  9. Trends in the use of digital technology for control and regulation of power supplies.

    Energy Technology Data Exchange (ETDEWEB)

    Carwardine, J.; Lenkszus, F.

    1999-10-22

    Since the availability of computers, accelerator power supplies have relied on digital technology in some way, from such simple tasks as turning the supplies on and off to the supplying of computer-controlled references. However, advances in digital technology, both in performance and cost, allow considerably more than simple control and monitoring. This, coupled with increasing demand for higher performance and monitoring capabilities, has made it appealing to integrate such technology into power supply designs. This paper will review current trends in the use of such advanced technology as embedded DSP controllers, and the application of real-time algorithms to the regulation and control of power supplies for accelerators and other large-scale physics applications.

  10. Designing a Decision Making Support Information System for the Operational Control of Industrial Technological Processes

    Directory of Open Access Journals (Sweden)

    Adelina Faradian

    2015-08-01

    Full Text Available Fuzzy logic is a new and innovative technology that was used in order to develop a realization of engineering control. In recent years, fuzzy logic proved its great potential especially applied to automatization of industrial process control, where it enables the control design to be formed based on experience of experts and results of experiments. The projects that have been realized reveal that the application of fuzzy logic in the technological process control has already provided us with better decisions compared to that of standard control technique. Fuzzy logic provides an opportunity to design an advisory system for decision-making based on operator experience and results of experiments not taking a mathematical model as a basis. The present work deals with a specific technological process ─ designing a support decision making information system for the operational control of the lime kiln with the use of fuzzy logic based on creation of the relevant expert-objective knowledge base.

  11. Coal-fueled diesel technology development Emissions Control

    Energy Technology Data Exchange (ETDEWEB)

    Van Kleunen, W.; Kaldor, S.; Gal, E.; Mengel, M.; Arnold, M.

    1994-01-01

    GEESI Emissions Control program activity ranged from control concept testing of 10 CFM slipstream from a CWS fuel single cylinder research diesel engine to the design, installation, and operation of a full-size Emissions Control system for a full-size CWS fuel diesel engine designed for locomotive operation.Early 10 CFM slipstream testing program activity was performed to determine Emissions Characteristics and to evaluate Emissions Control concepts such a Barrier filtration, Granular bed filtration, and Cyclone particulate collection for reduction of particulate and gaseous emissions. Use of sorbent injection into the engine exhaust gas upstream of the barrier filter or use of sorbent media in the granular bed filter were found to provide reduction of exhaust gas SO{sub 2} and NO{sub x} in addition to collection of ash particulate. Emergence of the use of barrier filtration as a most practical Emissions Control concept disclosed a need to improve cleanability of the filter media in order to avoid reduction of turbocharger performance by excessive barrier filter pressure drop. The next progression of program activity, after the slipstream feasibility state, was 500 CFM cold flow testing of control system concepts. The successful completion of 500 CFM cold flow testing of the Envelope Filter led to a subsequent progression to a similar configuration Envelope Filter designed to operate at 500 CFM hot gas flow from the CWS fuel research diesel engine in the GETS engine test laboratory. This Envelope Filter included the design aspect proven by cold flow testing as well as optimization of the selection of the installed filter media.

  12. GAS FLOW CONTROL SYSTEM IN REACTIVE MAGNETRON SPUTTERING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    I. M. Klimovich

    2015-01-01

    Full Text Available  It is known that the discharge parameters and the chemical composition of the particles flux impinging onto the substrate during a reactive magnetron sputtering are unstable. As a result spontaneous transitions between the «metal» mode of the target surface and the «poisoned» mode of the target surface have been observed. This leads to nonrepeatability of the coating compositions from process to process. The aim of this work is to design a gas flow control system for reactive sputtering processes. The control system allows to maintain a steady nonequilibrium state of the magnetron discharge in transition mode where the chemical state of the target surface is unstable. The intensities of spectral lines of the discharge spectrum are proposed as control parameters. Photodiode detectors were used for registration of intensities of spectral lines. A gas flow control system regulates argon and reactive gas flow automatically, using feedback signals from photodiode detectors on the intensities of the spectral lines, vacuum gauge, ion current sensor, sensors of discharge current and voltage. As an example, the process of reactive magnetron Ti-Al-N deposition is considered. The following discharge parameters are controlled during sputtering a composite target based on Ti with Al cylindrical inserts: current, voltage, total pressure of a gas mixture, substrate temperature, bias voltage and current of the substrate. Nitrogen flow was controlled by the spectral line intensity of titanium TiI 506,5 nm. The value of the line intensity is connected with the value of reactivity. Elemental composition and structure of the Ti-Al-N coatings were studied using Rutherford backscattering spectroscopy, scanning electron microscopy and X-ray diffraction. It was found, that stoichiometric Ti-Al-N coatings have a globular structure, enhanced hardness and low friction coefficient in contrast to Ti-Al-N coatings with nonstoichiometric composition, which have a

  13. New technologies in predicting, preventing and controlling emerging infectious diseases.

    Science.gov (United States)

    Christaki, Eirini

    2015-01-01

    Surveillance of emerging infectious diseases is vital for the early identification of public health threats. Emergence of novel infections is linked to human factors such as population density, travel and trade and ecological factors like climate change and agricultural practices. A wealth of new technologies is becoming increasingly available for the rapid molecular identification of pathogens but also for the more accurate monitoring of infectious disease activity. Web-based surveillance tools and epidemic intelligence methods, used by all major public health institutions, are intended to facilitate risk assessment and timely outbreak detection. In this review, we present new methods for regional and global infectious disease surveillance and advances in epidemic modeling aimed to predict and prevent future infectious diseases threats.

  14. CHOIS: enabling grid technologies for obesity surveillance and control.

    Science.gov (United States)

    Datta, Arun K; Jackson, Victoria; Nandkumar, Radha; Sproat, Jill; Zhu, Weimo; Krahling, Heidi

    2010-01-01

    CHOIS, the Child Health and Obesity Informatics System, is developed using open source portal technology with three-tiered Open Grid Services Architecture, an accepted standard for accessing Grid Computing and other services under Open Grid Collaborating Environments (OGCE). Its web application provides web based forms with 112 different fields to enter data ranging from demographic, height & weight for BMI, to genomic information. Automatic computation of BMI, BMI percentile and the risk of obesity alert are embedded into this system. After successful testing of the prototype, CHOIS is now ready to be used by the Illinois Department of Human Services (DHS) for obesity surveillance. This HIPAA & FERPA compliant secure system, integrating large databases in a high performance grid computing environment, enables school-nurse to collect data on school children and report statistical and surveillance information on BMI to identify those at-risk and obese for obesity prevention and intervention programs.

  15. Arms control and nonproliferation technologies. First quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Staehle, G; Alonzo, G M; Sanford, N M [eds.

    1995-01-01

    This first quarter issue for 1995 highlights the Small Business Innovation Research (SBIR) program. The SBIR program is managed by the DOE`s Basic Energy Sciences program within the Office of Energy Research. Each year, the SBIR program solicits research ideas of interest to the DOE. Articles contained in this issue include: The Small Business Innovation Research Program supported by the Office of Nonproliferation and National Security; Automated cueing to man-made objects via multispectral image; Security systems get smart with advanced processing and thermal imaging; A breakthrough in cooling system technology; The APSTNG neutron probe; Lithium-doped fullerene neutron detector; Miniature GC-MS for on-site chemical analysis; and Winner of Sandia President`s Quality Award.

  16. Pre-operative diclofenac HPβCD for pain control of needle biopsy in musculoskeletal neoplasm: preliminary results.

    Science.gov (United States)

    D'Arienzo, Antonio; Beltrami, Giovanni; Mancini, Daniele; Scoccianti, Guido; Cuomo, Pierluigi; Muratori, Francesco; Matera, Davide; Ippolito, Massimiliano; Mondanelli, Nicola; Frenos, Filippo; Totti, Francesca; Capanna, Rodolfo

    2015-01-01

    Needle biopsy is the main standard method used for diagnosis of musculoskeletal tumors of the limbs and superficial trunk. Pain control during this procedure is through the use of Local Anaestetic (L.A.). In order to achieve a complete pain control in our cases, recently we started using diclofenac HPβCD 50 mg via s.c. preoperativly. We present the clinical results of a non-randomized study of two eterogeneous groups of patients: "Experimental" Group (1): diclofenac HPβCD 50 mg via s.c. one hour before surgical procedure, local anesthesia and ev. diclofenac HPβCD 50 mg via s.c. 12 hours postoperative; "Conventional" Group (2): local anesthesia and ev. postoperative tramadol 100 mg via oral for pain control. In October 2014, at the Department of Orthopedic Oncology and Reconstructive Surgery of Florence, 37 musculoskeletal biopsies for a bone or a soft tissue lesion were performed. Exclusion criteria for this study were: known allergies to lidocaine, diclofenac, tramadol; known gastric or duodenal ulcers; known gastrointestinal bleed or perforation; refusal of the patients to collaborate. For one or more of these reasons, 6 patients were excluded from this study. In the Group 1, 10 patients (59%) referred no pain during the surgical procedure (8/14 biopsies on soft tissue and 2/3 on bone). In 5 cases (29%) no exacerbation of previous chronic pain, and in 2 cases (12%) a progression of local pain after biopsy (average 1 points higher in the VAS). In Group 2, only 6 patients (42%) did not have any pain during the procedure, 4 (29%) no exacerbation of previous chronic pain and 4 (29%) a progression of local pain (average 2 points higher in the VAS). Despite similar results in both Groups, Group 1 seemed to have a mild better control of perioperative pain. The use of diclofenac HPβCD 50 mg preoperative seems to be a rational approach for minimizing perioperative pain and the preliminary data of our study seem encouraging. Obviously many bias are present in this

  17. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    Directory of Open Access Journals (Sweden)

    Roisin P. Corcoran

    2014-12-01

    Full Text Available This paper describes the use of technology to provide virtual professional development (VPD for teachers and to conduct classroom observations in a study of English Language Learner (ELL instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral language/literacy, reading, and science across 63 randomly assigned urban, suburban, and rural schools (first year of implementation. ELLA-V also examines the impact of bimonthly VPD for treatment teachers compared to comparison group teachers on pedagogical skills, measured by sound observation instruments, and on student achievement, measured by state/national English language/literacy/reading tests and a national science test. This study features extensive technology use via virtual observations, bimonthly VPD, and randomly assigned treatment and control schools with students served in English as second language (ESL instructional time. The study design and methodology are discussed relativeto the specialized uses of technology and issues involving the evaluation of technology’s contribution to the intervention of interest and of the efficient, cost-effective execution of the study.

  18. Wearable Device Control Platform Technology for Network Application Development

    Directory of Open Access Journals (Sweden)

    Heejung Kim

    2016-01-01

    Full Text Available Application development platform is the most important environment in IT industry. There are a variety of platforms. Although the native development enables application to optimize, various languages and software development kits need to be acquired according to the device. The coexistence of smart devices and platforms has rendered the native development approach time and cost consuming. Cross-platform development emerged as a response to these issues. These platforms generate applications for multiple devices based on web languages. Nevertheless, development requires additional implementation based on a native language because of the coverage and functions of supported application programming interfaces (APIs. Wearable devices have recently attracted considerable attention. These devices only support Bluetooth-based interdevice communication, thereby making communication and device control impossible beyond a certain range. We propose Network Application Agent (NetApp-Agent in order to overcome issues. NetApp-Agent based on the Cordova is a wearable device control platform for the development of network applications, controls input/output functions of smartphones and wearable/IoT through the Cordova and Native API, and enables device control and information exchange by external users by offering a self-defined API. We confirmed the efficiency of the proposed platform through experiments and a qualitative assessment of its implementation.

  19. High Performance Low Cost Digitally Controlled Power Conversion Technology

    DEFF Research Database (Denmark)

    Jakobsen, Lars Tønnes

    2008-01-01

    Digital control of switch-mode power supplies and converters has within the last decade evolved from being an academic subject to an emerging market in the power electronics industry. This development has been pushed mainly by the computer industry that is looking towards digital power management...

  20. Accounting Control Technology Using SAP: A Case-Based Approach

    Science.gov (United States)

    Ragan, Joseph; Puccio, Christopher; Talisesky, Brandon

    2014-01-01

    The Sarbanes-Oxley Act (SOX) revolutionized the accounting and audit industry. The use of preventative and process controls to evaluate the continuous audit process done via an SAP ERP ECC 6.0 system is key to compliance with SOX and managing costs. This paper can be used in a variety of ways to discuss issues associated with auditing and testing…

  1. Arms control verification: The technologies that make it possible

    Energy Technology Data Exchange (ETDEWEB)

    Tsipis, K.; Hafemeister, D.W.; Janeway, P.

    1986-01-01

    This book presents papers on arms control verification. Topics considered include the politics of treaty verification and compliance, national security, remote sensing, image processing, image enhancement by digital computer, charge-coupled device image sensors, radar imaging, infrared surveillance, monitoring, seismological aspects, satellite verifications, seismic verification, and verifying a fissile material production freeze.

  2. USE OF INTELLECTUAL TECHNOLOGIES FOR QUALITY CONTROL OF CURD

    Directory of Open Access Journals (Sweden)

    M. M. Blagoveshchenskaia

    2014-01-01

    Full Text Available Summary. Method of curds quality control, based on neural network model is introduced in the paper. It allows to give fair estimate of final product’s quality without use of professional degustators. Method consists in construction of neural network model to estimate quality of curds by input and output parameters. Hardware software complex of curds taste control is proposed to apply in industry for independent estimate of final product. Operation of neural network model based on usage of artificial neural networks, which is one of directions of artificial intelligence theory. Neural network model consists of several artificial neurons layers, which emulate nerve cells functioning. Feed forward network of MLP type was used in solving of curds taste control problem. Feature of this network is that signals passed from one layer’s neurons to next layer’s neurons only from input layer to output, not the other way. Neural network was trained for its correct operation by selection of optimal synaptic factors. Flow diagram of training algorithm is introduced in the paper. Algorithm of neural network tuning is described in the paper. Author proposed set of recommendations for software-hardware complex deployment. Experiment results show that this taste estimate method based on neural net works simplify a problem of final product control as allow to react to deviations in production process on proper time.

  3. Active noise control technology. Active soon seigyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Eguchi, M.; Kokubo, F.; Tanaka, S.; Yao, K. (Sharp Corp., Osaka (Japan))

    1994-05-10

    The signal processing method of the Active Noise Control (ANC) system was studied. The principle of ANC is to output secondary sound waves having opposite phase, identical amplitude from the control point of the sound wave of the primary sound source, and eliminate the noise by interference. As application fields, there are air conditioner ducts and compressors as one dimensional noise source, and automobile and axial fan as three dimensional noise source. In order to improve the stability of coefficient renewal algorithm of Adaptive Digital Filter (ADF), for generation of opposite phase noise, DC-LMS algorithm which can control the rise in gain of specified frequency zone was proposed. Furthermore, with the purpose of reducing the amount of operation, the introduction of lattice type AR filter was tested for the stability of the filter in IIR-ADF (Infinite Impulse Response Adaptive Digital Filter) and its application process. The applicability studies of these improved methods on the noise inside of ducts were actually measured, and the effect was verified. For the multi-channel control of 3 dimensional noise source, reference scanning method to reduce the filter operation was proposed. In the partial space noise eliminating experiment, it was made clear that it possesses equivalent effect to error scanning method. 11 refs., 14 figs., 1 tab.

  4. Phase Change Permeation Technology For Environmental Control Life Support Systems

    Science.gov (United States)

    Wheeler, Raymond M.

    2014-01-01

    Use of a phase change permeation membrane (Dutyion [Trademark]) to passively and selectively mobilize water in microgravity to enable improved water recovery from urine/brine for Environment Control and Life Support Systems (ECLSS) and water delivery to plans for potential use in microgravity.

  5. Scheduling algorithms for automatic control systems for technological processes

    Science.gov (United States)

    Chernigovskiy, A. S.; Tsarev, R. Yu; Kapulin, D. V.

    2017-01-01

    Wide use of automatic process control systems and the usage of high-performance systems containing a number of computers (processors) give opportunities for creation of high-quality and fast production that increases competitiveness of an enterprise. Exact and fast calculations, control computation, and processing of the big data arrays – all of this requires the high level of productivity and, at the same time, minimum time of data handling and result receiving. In order to reach the best time, it is necessary not only to use computing resources optimally, but also to design and develop the software so that time gain will be maximal. For this purpose task (jobs or operations), scheduling techniques for the multi-machine/multiprocessor systems are applied. Some of basic task scheduling methods for the multi-machine process control systems are considered in this paper, their advantages and disadvantages come to light, and also some usage considerations, in case of the software for automatic process control systems developing, are made.

  6. Risk reduction based on controlling technologies on industrial enterprises

    Directory of Open Access Journals (Sweden)

    Khudyakova T.A.

    2017-01-01

    Full Text Available During the global economic instability, demand in developing toolkit which helps to mitigate the negative impact of environmental factors on efficiency of activity of the enterprise is increasing dramatically. However, in practice implementation of any of the tools causes the growth of additional costs, which, for purposes of effective functioning of mini-economic system must be covered by the profit’s increase from the introduction of this toolkit. The task’s implementation was achieved by processing a significant amount of scientific and statistical literature and calculation of integral indicators of the effectiveness of controlling system’s implementation at the enterprises. The analysis revealed a positive effect of the implementation of controlling system on the quality of decisions, efficiency of management, productivity, investment attractiveness, effectiveness of workflow and financial stability, and calculated the average integral efficiency indicators. The obtained results allow to make an unambiguous conclusion about the effectiveness of the controlling system’s implementing, which is especially important during the period of economic globalization and the growth of perturbations in the external environment, the efficiency reserves identified in the operation of the controlling system can and should be a certain buffer to reduce the negative impact of external factors on the sustainability of the enterprise.

  7. ADVANCED SULFUR CONTROL CONCEPTS FOR HOT-GAS DESULFURIZATION TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    A. LOPEZ ORTIZ; D.P. HARRISON; F.R. GROVES; J.D. WHITE; S. ZHANG; W.-N. HUANG; Y. ZENG

    1998-10-31

    a twenty-five-cycle test. The sorbent was exposed for 58 consecutive days to temperatures between 600°C and 800°C and gas atmospheres from highly reducing to highly oxidizing without measurable loss of sulfur capacity or reactivity. In the process analysis phase of this study, a two-stage desulfurization process using cerium sorbent with SO2 regeneration followed by zinc sorbent with dilute O2 regeneration was compared to a single-stage process using zinc sorbent and O2 regeneration with SO2 in the regeneration product gas converted to elemental sulfur using the direct sulfur recovery process (DSRP). Material and energy balances were calculated using the process simulation package PRO/II. Major process equipment was sized and a preliminary economic analysis completed. Sorbent replacement rate, which is determined by the multicycle sorbent durability, was found to be the most significant factor in both processes. For large replacement rates corresponding to average sorbent lifetimes of 250 cycles or less, the single-stage zinc sorbent process with DSRP was estimated to be less costly. However, the cost of the two-stage cerium sorbent process was more sensitive to sorbent replacement rate, and, as the required replacement rate decreased, the economics of the two-stage process improved. For small sorbent replacement rates corresponding to average sorbent lifetimes of 1000 cycles or more, the two-stage cerium process was estimated to be less costly. In the relatively wide middle range of sorbent replacement rates, the relative economics of the two processes depends on other factors such as the unit cost of sorbents, oxygen, nitrogen, and the relative capital costs.

  8. Advanced Instrumentation, Information, and Control System Technologies: Nondestructive Examination Technologies - FY11 Report

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M.; Coble, Jamie B.; Ramuhalli, Pradeep; Bond, Leonard J.

    2011-08-30

    Licensees of commercial nuclear power plants in the US are expected to submit license renewal applications for the period of operation of 60 to 80 years which has also been referred to as long term operation (LTO). The greatest challenges to LTO are associated with degradation of passive components as active components are routinely maintained and repaired or placed through maintenance programs. Some passive component degradation concerns include stress corrosion cracking (SCC) of metal components, radiation induced embrittlement of the reactor pressure vessel (RPV), degradation of buried piping, degradation of concrete containment structures, and degradation of cables. Proactive management of passive component aging employs three important elements including online monitoring of degradation, early detection of degradation at precursor stages, and application of prognostics for the prediction of remaining useful life (RUL). This document assesses several nondestructive examination (NDE) measurement technologies for integration into proactive aging management programs. The assessment is performed by discussing the three elements of proactive aging management identified above, considering the current state of the industry with respect to adopting these key elements, and analyzing measurement technologies for monitoring large cracks in metal components, monitoring early degradation at precursor stages, monitoring the degradation of concrete containment structures, and monitoring the degradation of cables. Specific and general needs have been identified through this assessment. General needs identified include the need for environmentally rugged sensors are needed that can operate reliably in an operating reactor environment, the need to identify parameters from precursor monitoring technologies that are unambiguously correlated with the level of pre-macro defect damage, and a methodology for identifying regions where precursor damage is most likely to initiate.

  9. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  10. Domestic Technology Transfer versus Technology Export Control - The Emerging National Policies and the Role of the Bench Engineer

    Science.gov (United States)

    1984-01-01

    Defense Technology Transfer Fundamentals 10 B. Governmental Stimuli to Technology Transfer 1. Information Programs 2. Information Analysis Centers 3...networking. II. Domestic Technology Transfer A. Non- Defense Technology Transfer Fundamentals The nation’s technological reservoir is filled by

  11. A Research Framework for Demonstrating Benefits of Advanced Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hallbert, Bruce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    Control Room modernization is an important part of life extension for the existing light water reactor fleet. None of the 99 currently operating commercial nuclear power plants in the U.S. has completed a full-scale control room modernization to date. A full-scale modernization might, for example, entail replacement of all analog panels with digital workstations. Such modernizations have been undertaken successfully in upgrades in Europe and Asia, but the U.S. has yet to undertake a control room upgrade of this magnitude. Instead, nuclear power plant main control rooms for the existing commercial reactor fleet remain significantly analog, with only limited digital modernizations. Previous research under the U.S. Department of Energy’s Light Water Reactor Sustainability Program has helped establish a systematic process for control room upgrades that support the transition to a hybrid control. While the guidance developed to date helps streamline the process of modernization and reduce costs and uncertainty associated with introducing digital control technologies into an existing control room, these upgrades do not achieve the full potential of newer technologies that might otherwise enhance plant and operator performance. The aim of the control room benefits research presented here is to identify previously overlooked benefits of modernization, identify candidate technologies that may facilitate such benefits, and demonstrate these technologies through human factors research. This report serves as an outline for planned research on the benefits of greater modernization in the main control rooms of nuclear power plants.

  12. Control of mercury emissions: policies, technologies, and future trends

    OpenAIRE

    Rhee, Seung-Whee

    2015-01-01

    Seung-Whee Rhee Department of Environmental Engineering, Kyonggi University, Suwon, Republic of Korea Abstract: Owing to the Minamata Convention on Mercury and the Global Mercury Partnership, policies and regulations on mercury management in advanced countries were intensified by a mercury phaseout program in the mercury control strategy. In developing countries, the legislative or regulatory frameworks on mercury emissions are not established specifically, but mercury management is designed...

  13. Control of mercury emissions: policies, technologies, and future trends

    OpenAIRE

    Rhee, Seung-Whee

    2015-01-01

    Seung-Whee Rhee Department of Environmental Engineering, Kyonggi University, Suwon, Republic of Korea Abstract: Owing to the Minamata Convention on Mercury and the Global Mercury Partnership, policies and regulations on mercury management in advanced countries were intensified by a mercury phaseout program in the mercury control strategy. In developing countries, the legislative or regulatory frameworks on mercury emissions are not established specifically, but mercury management is designed...

  14. Description of emission control using fluidized-bed, heat-exchange technology

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, G.J.; Grogan, P.J.

    1980-06-01

    Environmental effects of fluidized-bed, waste-heat recovery technology are identified. The report focuses on a particular configuration of fluidized-bed, heat-exchange technology for a hypothetical industrial application. The application is a lead smelter where a fluidized-bed, waste-heat boiler (FBWHB) is used to control environmental pollutants and to produce steam for process use. Basic thermodynamic and kinetic information for the major sulfur dioxide (SO/sub 2/) and NO/sub x/ removal processes is presented and their application to fluidized-bed, waste heat recovery technology is discussed. Particulate control in fluidized-bed heat exchangers is also discussed.

  15. Energy utilization and environmental control technologies in the coal-electric cycle

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, G.C.

    1977-10-01

    This report presents an overview and assessment of the currently commercial and possible future technologies in the United States that are a part of the coal-electric cycle. From coal production to residual emissions control at the power plant stack, this report includes a brief history, current status and future assessment of each technology. It also includes a discussion, helpful for policy making decisions, of the process operation, environmental emission characteristics, market constraints and detailed cost estimates for each of these technologies, with primary emphasis on coal preparation, coal-electric generation and emissions control systems.

  16. CONTACT: An Air Force technical report on military satellite control technology

    Science.gov (United States)

    Weakley, Christopher K.

    1993-07-01

    This technical report focuses on Military Satellite Control Technologies and their application to the Air Force Satellite Control Network (AFSCN). This report is a compilation of articles that provide an overview of the AFSCN and the Advanced Technology Program, and discusses relevant technical issues and developments applicable to the AFSCN. Among the topics covered are articles on Future Technology Projections; Future AFSCN Topologies; Modeling of the AFSCN; Wide Area Communications Technology Evolution; Automating AFSCN Resource Scheduling; Health & Status Monitoring at Remote Tracking Stations; Software Metrics and Tools for Measuring AFSCN Software Performance; Human-Computer Interface Working Group; Trusted Systems Workshop; and the University Technical Interaction Program. In addition, Key Technology Area points of contact are listed in the report.

  17. Assessment of basic research needs for greenhouse gas control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S.M.; Chandler, W.; Edmonds, J.; Houghton, J.; Levine, M.; Bates, L.; Chum, H.; Dooley, J.; Grether, D.; Logan, J.; Wiltsee, G.; Wright, L.

    1998-09-01

    This paper is an outgrowth of an effort undertaken by the Department of Energy's Office of Energy Research to assess the fundamental research needs to support a national program in carbon management. Five topics were identified as areas where carbon management strategies and technologies might be developed: (1) capture of carbon dioxide, decarbonization strategies, and carbon dioxide disposal and utilization; (2) hydrogen development and fuel cells; (3) enhancement of the natural carbon cycle; (4) biomass production and utilization; and (5) improvement of the efficiency of energy production, conversion, and utilization. Within each of these general areas, experts came together to identify targets of opportunity for fundamental research likely to lead to the development of mid- to long-term solutions for stabilizing or decreasing carbon dioxide and other greenhouse gases in the atmosphere. Basic research to support the options outlined above are far reaching-from understanding natural global processes such as the ocean and terrestrial carbon cycles to development of new materials and concepts for chemical separation. Examples of fundamental research needs are described in this paper.

  18. Physical activities of Patients with adolescent idiopathic scoliosis (AIS): preliminary longitudinal case–control study historical evaluation of possible risk factors

    OpenAIRE

    McMaster, Marianne E; Lee, Amanda Jane; Burwell, R Geoffrey

    2015-01-01

    To our knowledge there are no publications that have evaluated physical activities in relation to the etiopathogenesis of adolescent idiopathic scoliosis (AIS) other than sports scolioses. In a preliminary longitudinal case–control study, mother and child were questioned and the children examined by one observer. The aim of the study was to examine possible risk factors for AIS. Two study groups were assessed for physical activities: 79 children diagnosed as having progressive AIS at one spin...

  19. A preliminary report on the use of virtual reality technology to elicit craving and cue reactivity in cocaine dependent individuals.

    Science.gov (United States)

    Saladin, Michael E; Brady, Kathleen T; Graap, Ken; Rothbaum, Barbara Olasov

    2006-10-01

    In the present feasibility study, we developed a 3-dimensional virtual "crack" cocaine environment and evaluated the environment's ability to elicit subjective craving and cue reactivity (i.e., subjective emotional responding, heart rate and skin conductance) in 11 crack cocaine dependent individuals. Each of the seven 3-D crack cocaine scenes in the cocaine environment depicted actors engaging in a range of using-related behaviors (i.e., smoking crack) whereas the neutral environment contained scenes depicted 3-D aquariums with active aquatic life (baseline measures were obtained following immersion in the neutral environment). Results indicated that craving was significantly elevated during the cocaine-related scenes as compared to baseline. Craving varied by scene content, with scenes depicting active cocaine use eliciting the highest levels of craving. Heart rate was significantly higher in four of the scenes with drug use content and positive affect (i.e., happiness) ratings were significantly lower during cocaine scenes as compared to baseline. Overall, the results suggest that a standardized and stimulus rich virtual reality environment effectively elicits craving and physiologic reactivity. Such technology has potential utility in the development and refinement of exposure-based behavioral and pharmacological interventions for substance use disorders.

  20. Preliminary results on low power sigmoid neuron transistor response in 28 nm high-k metal gate Fully Depleted SOI technology

    Science.gov (United States)

    Galy, Ph.; Dehan, P.; Jimenez, J.; Heitz, B.

    2013-11-01

    The purpose of this paper is to describe a preliminary approach to achieve a sigmoid neuron transistor response using the 28 nm high-k metal gate Fully Depleted SOI (FDSOI) technology. It is well known that a neural network is an ambitious way to handle signal and/or data flow. Of interest also is the 'learning phase' of the proposed structure. However, the major difficulty of such structures, where the elementary device is a "Neuron Design (ND)" is in their integration. The elementary ND is based upon a circuit with at least ten interconnected CMOS transistors in order to obtain a sigmoid response activation function (in this example) with multiple inputs typically as per the McCulloch and Pitts model. Given that a large number of NDs are required to build an Artificial Neural Network (ANN), the power consumption of such a structure is a key topic that is also addressed. Another open question concerns the dispersion response due to process variability. This study reports on a new single undoped Formal Neuron Transistor (NT) solution.

  1. 膜技术回收马铃薯蛋白的基本性能%The preliminary characters of recycling potato protein through membrane technology

    Institute of Scientific and Technical Information of China (English)

    吴娜; 刘凌; 周明; 孙慧; 李国明; 姜忠杰

    2015-01-01

    In this paper,we focused on the preliminary characters of recycling potato protein through membrane technology.We analyzed the molecular weight distribution,amino acid content,functional properties,and alkaloid content of potato protein through SDS-PAGE and HPLC.The results suggested that the potato retained patatin and protease inhibitors,which are the two major proteins of potatoes.Its nutritional value and functional properties were equivalent to soybean protein isolate;it had lower alkaloid content compared to the result of the thermal coagulation method.%采用SDS-PAGE凝胶电泳、HPLC等方法分析了膜法回收所得马铃薯蛋白质的相对分子质量分布、氨基酸含量、功能性质及生物碱含量.结果表明:膜技术回收所得马铃薯蛋白保留了原马铃薯中的两类主要蛋白质——马铃薯糖蛋白(patatin)和蛋白酶抑制剂,营养及功能性与大豆分离蛋白相当,生物碱含量远低于热絮凝方法所得马铃薯蛋白.

  2. Skull Bone Defects Reconstruction with Custom-Made Titanium Graft shaped with Electron Beam Melting Technology: Preliminary Experience in a Series of Ten Patients.

    Science.gov (United States)

    Francaviglia, Natale; Maugeri, Rosario; Odierna Contino, Antonino; Meli, Francesco; Fiorenza, Vito; Costantino, Gabriele; Giammalva, Roberto Giuseppe; Iacopino, Domenico Gerardo

    2017-01-01

    Cranioplasty represents a challenge in neurosurgery. Its goal is not only plastic reconstruction of the skull but also to restore and preserve cranial function, to improve cerebral hemodynamics, and to provide mechanical protection of the neural structures. The ideal material for the reconstructive procedures and the surgical timing are still controversial. Many alloplastic materials are available for performing cranioplasty and among these, titanium still represents a widely proven and accepted choice. The aim of our study was to present our preliminary experience with a "custom-made" cranioplasty, using electron beam melting (EBM) technology, in a series of ten patients. EBM is a new sintering method for shaping titanium powder directly in three-dimensional (3D) implants. To the best of our knowledge this is the first report of a skull reconstruction performed by this technique. In a 1-year follow-up no postoperative complications have been observed and good clinical and esthetic outcomes were achieved. Costs higher than those for other types of titanium mesh, a longer production process, and the greater expertise needed for this technique are compensated by the achievement of most complex skull reconstructions with a shorter operative time.

  3. A novel nonpharmacological intervention - breathing-controlled electrical stimulation for neuropathic pain management after spinal cord injury - a preliminary study.

    Science.gov (United States)

    Li, Shengai; Davis, Matthew; Frontera, Joel E; Li, Sheng

    2016-01-01

    The objective of this study was to examine the effectiveness of a novel nonpharmacological intervention - breathing-controlled electrical stimulation (BreEStim) - for neuropathic pain management in spinal cord injury (SCI) patients. There were two experiments: 1) to compare the effectiveness between BreEStim and conventional electrical stimulation (EStim) in Experiment (Exp) 1 and 2) to examine the dose-response effect of BreEStim in Exp 2. In Exp 1, 13 SCI subjects (6 males and 7 females, history of SCI: 58.2 months, from 7 to 150 months, impairments ranging from C4 AIS B to L1 AIS B) received both BreEStim and EStim in a randomized order with at least 3 days apart. A total of 120 electrical stimuli to the median nerve transcutaneously were triggered by voluntary inhalation during BreEStim or were randomly delivered during EStim. In Exp 2, a subset of 7 subjects received BreEStim120 and 240 stimuli randomly on two different days with 7 days apart (BreEStim120 vs BreEStim240). The primary outcome variable was the visual analog scale (VAS) score. In Exp 1, both BreEStim and EStim showed significant analgesic effects. Reduction in VAS score was significantly greater after BreEStim (2.6±0.3) than after EStim (0.8±0.3) (P<0.001). The duration of analgesic effect was significantly longer after BreEStim (14.2±6 hours) than after EStim (1.9±1 hours) (P=0.04). In Exp 2, BreEStim120 and BreEStim240 had similar degree and duration of analgesic effects. The findings from this preliminary study suggest that BreEStim is an effective alternative nonpharmacological treatment for chronic neuropathic pain in patients suffering from SCI.

  4. Sneak circuit analysis of instrumentation and control systems. [technology transfer

    Science.gov (United States)

    Rankin, J. P.; Williams, A. M.

    1974-01-01

    The evolvement and implementation is presented of a systematic means for detecting the sneak prone designs of an electrical system which could result in such unplanned modes so that they can be prevented prior to occurrence. Sneak circuit analysis is shown to be a formalized approach based upon topological techniques. The trees employed are produced from manufacturing detail data processed by a computer to orderly completion. The analysis techniques applied on a variety of NASA programs are shown to be particularly applicable to industrial instrumentation and control systems.

  5. The impact of active controls technology on the structural integrity of aeronautical vehicles

    Science.gov (United States)

    Noll, Thomas E.; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry; Kaynes, Ian; Lee, Ben; Sparrow, James

    1993-01-01

    The findings of an investigation conducted under the auspices of The Technical Cooperation Program (TTCP) to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle are summarized. Important points concerning structural technology considerations implicit in applying active controls technology in new aircraft are summarized. These points are well founded and based upon information received from within the aerospace industry and government laboratories, acquired by sponsoring workshops which brought together experts from contributing and interacting technical disciplines, and obtained by conducting a case study to independently assess the state of the technology. The paper concludes that communication between technical disciplines is absolutely essential in the design of future high performance aircraft.

  6. Research on hydraulic slotting technology controlling coal-gas outbursts

    Institute of Scientific and Technical Information of China (English)

    WEI Guo-ying; SHAN Zhi-yong; ZHANG Zi-min

    2008-01-01

    Measured to control serious coal-gas outburst in coal seam were analyzed by theory and experimented in test site. A new technique to distress the coal-bed and drain methane, called hydraulic slotting, was described in detail, and the mechanism of hydrau-lic slotting was put forward and analyzed. The characteristic parameter of hydraulic slotting was given in Jiaozuo mining area and the characteristic of validity, adaptability and secu-rity was evaluated. The results show that the stress surrounding the strata and the gas in coal seam is released efficiently and thoroughly while new techniques are taken, as slot-ting at heading face by high pressure large diameter jet. The resistance to coal and gas outbursts is increased dramatically once the area of slotting is increased to a certain size.In the process of driving 2 000 m tunnel by hydraulic slotting excavation, coal and gas outburst never occurre. The technique could be used to prevent and control potential coal-gas outburst in the proceeding of tunnel driving, and the speed tunneling could be as high as more than 2 times.

  7. Applying Space Technology to Enhance Control of an Artificial Arm

    Science.gov (United States)

    Atkins, Diane; Donovan, William H.; Novy, Mara; Abramczyk, Robert

    1997-01-01

    At the present time, myoelectric prostheses perform only one function of the hand: open and close with the thumb, index and middle finger coming together to grasp various shaped objects. To better understand the limitations of the current single-function prostheses and the needs of the individuals who use them, The Institute for Rehabilitation and Research (TIRR), sponsored by the National Institutes of Health (August 1992 - November 1994), surveyed approximately 2500 individuals with upper limb loss. When asked to identify specific features of their current electric prosthesis that needed improvement, the survey respondents overwhelmingly identified the lack of wrist and finger movement as well as poor control capability. Simply building a mechanism with individual finger and wrist motion is not enough. Individuals with upper limb loss tend to reject prostheses that require continuous visual monitoring and concentration to control. Robotics researchers at NASA's Johnson Space Center (JSC) and Rice University have made substantial progress in myoelectric teleoperation. A myoelectric teleoperation system translates signals generated by an able-bodied robot operator's muscles during hand motions into commands that drive a robot's hand through identical motions. Farry's early work in myoelectric teleoperation used variations over time in the myoelectric spectrum as inputs to neural networks to discriminate grasp types and thumb motions. The resulting schemes yielded up to 93% correct classification on thumb motions. More recently, Fernandez achieved 100% correct non-realtime classification of thumb abduction, extension, and flexion on the same myoelectric data. Fernandez used genetic programming to develop functions that discriminate between thumb motions using myoelectric signal parameters. Genetic programming (GP) is an evolutionary programming method where the computer can modify the discriminating functions' form to improve its performance, not just adjust

  8. PROCESS CONTROL IN THE EDUCATION OF ORGANIC CHEMICAL TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    lstván Csontos

    2001-06-01

    Full Text Available Las prácticas de laboratorio demuestran la importancia de los modernos procesos de control en las tecnologías de química orgánica. Se necesitaba desarrollar un sistema que une las ventajas de los calorímetros de reacción con las de modelo de los reactores controladas de la industria. El diseño de hardware y de software se permite trasladar el programa desarrollado en el laboratorio para el nivel industrial. El algoritmo general para las reacciones de diazotación y clormetilación es aplicado para el sintésis del cloruro de benzo-diazonio y cloruro de dietoxi-benzil en las prácticas de laboratorio.

  9. Construct hepatic analog by cell-matrix controlled assembly technology

    Institute of Scientific and Technical Information of China (English)

    LIU Haixia; YAN Yongnian; WANG Xiaohong; CHENG Jie; LIN Feng; XIONG Zhuo; Wu Rendong

    2006-01-01

    A mixture of hepatic cells and chitosan/gelatin solution was deposited to construct a hepatic analog by way of layer-by-layer deposition technique using a home-made devise. The size and cell concentration of the analogs can be controlled freely. Approximately 90% of the hepatic cells remained viable under 0.2 Mpa extrusion pressure. Cultured in vitro 8 weeks before animal test, hepatic cells in structure maintained their phenotype and kept proliferating, and albumin and other secretion of the cells increased. Cords and hepaton-like structures were observed after culture for 20 d. These results indicate that hepatic cells could be assembled directly into a 3D viable structure and expanded to form a hepatic organoid. This accomplishment is considered to be an interesting means for the fabrication of liver replacements.

  10. Preliminary Scaling and controls Analysis of an FHR-HTSE System Idaho National Laboratory Summer 2013 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Shannon Bragg-Sitton; Piyush Sabharwall; Rohit Upadhya

    2014-01-01

    For new nuclear reactor system designs to be approved by regulatory agencies like the Nuclear Regulatory Commission (NRC), the details of system operation must be validated with respect to standards of safety, control, and output. A scaled experiment that replicates certain properties of the system can be used to validate compliance with regulatory standards, while avoiding the prohibitive cost and labor required to develop a fully functional prototype system; therefore, designing such an experiment is of special interest to current efforts to develop hybrid energy systems (HES) that integrate small modular reactors (SMRs), renewable energy systems, and industrial process applications such as hydrogen production and desalination. In addition, a scaled experiment can be an economical method of analyzing the interconnections between HES components and understanding the time constants associated between inter-component energy and information flows. This report discusses the results of a preliminary scaling analysis done for the primary loop of a 300 MWth Fluoride-Salt-Cooled High Temperature Reactor (FHR) that is coupled with a High-Temperature Steam Electrolysis system (HTSE), as well as the basic control logic that governs the primary components and the necessary hardware to achieve optimal functionality. The scaled facility will be a 1 MWth system that uses Dowtherm A as the simulant fluid for Flibe (the coolant of choice for the primary loop of molten salt reactors), and can validate the heat transfer and steady-state operational requirements of the 300 MWth prototype. The scaled facility matches the Prandtl and Reynolds numbers associated with steady-state operation of the FHR-HTSE’s primary loop without having to deal with very high temperatures, flow rates, or power inputs. This will allow the facility to run experiments that analyze various thermophysical and fluid-dynamic properties that characterize reactor operation, such as pressure drops, radial

  11. Preliminary Scaling and controls Analysis of an FHR-HTSE System Idaho National Laboratory Summer 2013 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Shannon Bragg-Sitton; Piyush Sabharwall; Rohit Upadhya

    2013-08-01

    For new nuclear reactor system designs to be approved by regulatory agencies like the Nuclear Regulatory Commission (NRC), the details of system operation must be validated with respect to standards of safety, control, and output. A scaled experiment that replicates certain properties of the system can be used to validate compliance with regulatory standards, while avoiding the prohibitive cost and labor required to develop a fully functional prototype system; therefore, designing such an experiment is of special interest to current efforts to develop hybrid energy systems (HES) that integrate small modular reactors (SMRs), renewable energy systems, and industrial process applications such as hydrogen production and desalination. In addition, a scaled experiment can be an economical method of analyzing the interconnections between HES components and understanding the time constants associated between inter-component energy and information flows. This report discusses the results of a preliminary scaling analysis done for the primary loop of a 300 MWth Fluoride-Salt-Cooled High Temperature Reactor (FHR) that is coupled with a High-Temperature Steam Electrolysis system (HTSE), as well as the basic control logic that governs the primary components and the necessary hardware to achieve optimal functionality. The scaled facility will be a 1 MWth system that uses Dowtherm A as the simulant fluid for Flibe (the coolant of choice for the primary loop of molten salt reactors), and can validate the heat transfer and steady-state operational requirements of the 300 MWth prototype. The scaled facility matches the Prandtl and Reynolds numbers associated with steady-state operation of the FHR-HTSE’s primary loop without having to deal with very high temperatures, flow rates, or power inputs. This will allow the facility to run experiments that analyze various thermophysical and fluid-dynamic properties that characterize reactor operation, such as pressure drops, radial

  12. Investigation on food sanitation controlling technologies; Shokuhin eisei kanri gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Doi, Y. [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nishioka, J.

    2000-03-24

    Investigation has been made on the current status of food sanitation controlling technologies. Eighty percent of food poisoning is caused by bacte such as Salmonera, enteritis vibrio, staphylococcus, and pathogenic colibacillus. Putrefaction as the cause for food poisoning occurs from proliferation of different microorganisms. Heating sterilization is the main method being performed, but non-heating method may include sterilization by flash and high voltage pulse discharge in addition to ultra-high pressure and ultraviolet ray sterilization. As a result of the questionnaire survey, what is extracted as the problems in the food sanitation controlling technologies is to establish a rinsing and sterilizing method with large sterilization effect, an effective sterilizing method and thawing of processed marine products, and a cooling method in food processing. Increasingly demanded for the future is to develop a foodstuff sanitation control system using as the core the hazard analysis critical control point (HACCP, a quality control program developed by the U.S. NASA to ensure safety in manufacturing space food), and micro-organism control and sterilizing technologies to support the above system. The flash pulse and high-voltage pulse sterilizing technologies as the non-heating sterilizing technology are more effective than the conventional heating sterilization methods also from the aspect of quality retention after sterilization. More active development thereof is desired. (NEDO)

  13. JV Task 126 - Mercury Control Technologies for Electric Utilities Burning Bituminous Coal

    Energy Technology Data Exchange (ETDEWEB)

    Jason Laumb; John Kay; Michael Jones; Brandon Pavlish; Nicholas Lentz; Donald McCollor; Kevin Galbreath

    2009-03-29

    The EERC developed an applied research consortium project to test cost-effective mercury (Hg) control technologies for utilities burning bituminous coals. The project goal was to test innovative Hg control technologies that have the potential to reduce Hg emissions from bituminous coal-fired power plants by {ge}90% at costs of one-half to three-quarters of current estimates for activated carbon injection (ACI). Hg control technology evaluations were performed using the EERC's combustion test facility (CTF). The CTF was fired on pulverized bituminous coals at 550,000 Btu/hr (580 MJ/hr). The CTF was configured with the following air pollution control devices (APCDs): selective catalytic reduction (SCR) unit, electrostatic precipitator (ESP), and wet flue gas desulfurization system (WFDS). The Hg control technologies investigated as part of this project included ACI (three Norit Americas, Inc., and eleven Envergex sorbents), elemental mercury (Hg{sup 0}) oxidation catalysts (i.e., the noble metals in Hitachi Zosen, Cormetech, and Hitachi SCR catalysts), sorbent enhancement additives (SEAs) (a proprietary EERC additive, trona, and limestone), and blending with a Powder River Basin (PRB) subbituminous coal. These Hg control technologies were evaluated separately, and many were also tested in combination.

  14. High Temperature Superconducting Magnetic Energy Storage and Its Power Control Technology

    Institute of Scientific and Technical Information of China (English)

    Xiao-Yuan Chen; Jian-Xun Jin; Kai-Meng Ma; Ju Wen; Ying Xin; Wei-Zhi Gong; An-Lin Ren; Jing-Yin Zhang

    2008-01-01

    High temperature superconducting (HTS) power inductor and its control technology have been studied and analyzed in the paper. Based on the results of simulations and practical experiments, a controlled release scheme has been proposed and verified for developing a practical HTS SMES prototype.

  15. The Opposite of Control: A Deweyan Perspective on Intrinsic Motivation in "After 3" Technology Programs.

    Science.gov (United States)

    Wong, D.; Packard, B.; Girod, M.; Pugh, K.

    2000-01-01

    Discusses intrinsic motivation and John Dewey's perspectives on aesthetic experiences in relation to "After 3" technology programs, based on experiences with KLICK (Kids Learning in Computer Klubhouses). Highlights include control and theories of motivation and learning; and Dewey's perspectives on the opposite of control in…

  16. Research on Technological Process Control Model of Reverse Logistics in Manufacturing System

    Institute of Scientific and Technical Information of China (English)

    CHANG Jiane; LIU Chao

    2006-01-01

    This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary, and established four kinds of technological process control models of reverse logistics in manufacturing system according to different processing methods. These models embed each other that form a cubic control system of reverse logistics.

  17. Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    Energy Technology Data Exchange (ETDEWEB)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-03-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.

  18. Review of innovations in digital health technology to promote weight control.

    Science.gov (United States)

    Thomas, J Graham; Bond, Dale S

    2014-01-01

    Advances in technology have contributed to the obesity epidemic and worsened health by reducing opportunities for physical activity and by the proliferation of inexpensive calorie-dense foods. However, much of the same technology can be used to counter these troublesome trends by fostering the development and maintenance of healthy eating and physical activity habits. In contrast to intensive face-to-face treatments, technology-based interventions also have the potential to reach large numbers of individuals at low cost. The purpose of this review is to discuss studies in which digital technology has been used for behavioral weight control, report on advances in consumer technology that are widely adopted but insufficiently tested, and explore potential future directions for both. Web-based, mobile (eg, smartphone), virtual reality, and gaming technologies are the focus of discussion. The best evidence exists to support the use of digital technology for self-monitoring of weight-related behaviors and outcomes. However, studies are underway that will provide additional, important information regarding how best to apply digital technology for behavioral weight control.

  19. Organisational Aspects of Delegating Accounting and Controlling Authorities with the Use of Information and Communication Technologies

    Directory of Open Access Journals (Sweden)

    Muravskiy Volodymyr V.

    2013-11-01

    Full Text Available The article studies problems of application of information and communication technologies in accounting and control. It develops an organisational model of general accounting and control by an enterprise and outside firm on principles of delegation of accounting and controlling authorities, protection and distant data transfer. It considers a possibility of transformation of accounting principles from the position of the theory of accounting and informatics and also influence of information and communication technologies upon accounting principles. The article marks out changes in realisation of accounting principles in the computer communicative form of accounting.

  20. Randomized Controlled Pilot Study Testing Use of Smartphone Technology for Obesity Treatment

    Directory of Open Access Journals (Sweden)

    Jerilyn K. Allen

    2013-01-01

    Full Text Available Background. The established interventions for weight loss are resource intensive which can create barriers for full participation and ultimate translation. The major goal of this pilot study was to evaluate the feasibility, acceptability, and preliminary efficacy of theoretically based behavioral interventions delivered by smartphone technology. Methods. The study randomized 68 obese adults to receive one of four interventions for six months: (1 intensive counseling intervention, (2 intensive counseling plus smartphone intervention, (3 a less intensive counseling plus smartphone intervention, and (4 smartphone intervention only. The outcome measures of weight, BMI, waist circumference, and self-reported dietary intake and physical activity were assessed at baseline and six months. Results. The sample was 78% female and 49% African American, with an average age of 45 years, and average BMI of 34.3 kg/m2. There were trends for differences in weight loss among the four intervention groups. Participants in the intensive counseling plus self-monitoring smartphone group and less intensive counseling plus self-monitoring smartphone group tended to lose more weight than other groups (5.4 kg and 3.3 kg, resp.. Conclusions. The results of this pilot trial of a weight loss intervention provide preliminary support for using a smartphone application for self-monitoring as an adjunct to behavioral counseling.

  1. Systems engineering aspects of a preliminary conceptual design of the space station environmental control and life support system

    Science.gov (United States)

    Lin, C. H.; Meyer, M. S.

    1983-01-01

    The systems engineering aspects of developing a conceptual design of the Space Station Environmental Control and Life Support System (ECLSS) are discussed. Topics covered include defining system requirements and groundrules for approach, formulating possible cycle closure options, and establishing a system-level mass balance on the essential materials processed in oxygen and water cycles. Consideration is also given to the performance of a system trade-off study to determine the best degree of cycle closure for the ECLSS, and the construction of a conceptual design of the ECLSS with subsystem performance specifications and candidate concepts. For the optimum balance between development costs, technological risks, and resupply penalties, a partially closed cycle ECLSS option is suggested.

  2. Technological options to control quality of fish burgers.

    Science.gov (United States)

    Danza, A; Conte, A; Del Nobile, M A

    2017-06-01

    This research was focused on preservation strategies applied to develop fish burgers enriched with tomato flour and extra-virgin olive oil. The effects of three different gas mixtures (5:95 O2/CO2; 10:60:30 O2/CO2/N2 and 5:50:45 O2/CO2/N2) on burger quality were analyzed by monitoring microbial cell load of main spoilage microorganisms, pH and sensory properties. As expected, modified atmosphere packaging significantly affected mesophilic bacteria with a reduction of about 2 log cycles for samples under 5% O2 and 95% CO2. Afterward, the best gas mixture was used in combination with various natural antimicrobial compounds (thymol, grape fruit seed extract and biocitrus). The biocitrus showed the strike balance between microbial and sensory quality, thus suggesting to be adopted for dipping treatment of the entire fish fillet before the mincing process. Later all the strategies tested individually were combined and samples were monitored for microbiological and sensory quality. Results obtained showed that dipping treatment of fillet in biocitrus solution (20,000 ppm) under modified conditions extended the shelf life by 8 days compared to the control sample, without affecting the sensory acceptability.

  3. Gossamer-1: Mission concept and technology for a controlled deployment of gossamer spacecraft

    Science.gov (United States)

    Seefeldt, Patric; Spietz, Peter; Sproewitz, Tom; Grundmann, Jan Thimo; Hillebrandt, Martin; Hobbie, Catherin; Ruffer, Michael; Straubel, Marco; Tóth, Norbert; Zander, Martin

    2017-01-01

    Gossamer structures for innovative space applications, such as solar sails, require technology that allows their controlled and thereby safe deployment. Before employing such technology for a dedicated science mission, it is desirable, if not necessary, to demonstrate its reliability with a Technology Readiness Level (TRL) of six or higher. The aim of the work presented here is to provide reliable technology that enables the controlled deployment and verification of its functionality with various laboratory tests, thereby qualifying the hardware for a first demonstration in low Earth orbit (LEO). The development was made in the Gossamer-1 project of the German Aerospace Center (DLR). This paper provides an overview of the Gossamer-1 mission and hardware development. The system is designed based on the requirements of a technology demonstration mission. The design rests on a crossed boom configuration with triangular sail segments. Employing engineering models, all aspects of the deployment were tested under ambient environment. Several components were also subjected to environmental qualification testing. An innovative stowing and deployment strategy for a controlled deployment, as well as the designs of the bus system, mechanisms and electronics are described. The tests conducted provide insights into the deployment process and allow a mechanical characterization of that deployment process, in particular the measurement of the deployment forces. Deployment on system level could be successfully demonstrated to be robust and controllable. The deployment technology is on TRL four approaching level five, with a qualification model for environmental testing currently being built.

  4. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  5. Analytical and Preliminary Simulation Study of a Pilot's Ability to Control the Terminal Phase of a Rendezvous with Simple Optical Devices and a Timer

    Science.gov (United States)

    Lineberry, Edgar C., Jr.; Brissenden, Roy F.; Kurbjun, Max C.

    1961-01-01

    One method of controlling the terminal phase of a space rendezvous between two vehicles is first to correct the flight path of the controlled vehicle so that a constant line of sight is established between the vehicles. This correction is accomplished by thrusting normal to the sight line in a direction to arrest the angular motion of this line. Once this collision course has been established, the second step is to control the closure rate for a safe approach along the line of sight. Adequate control of this maneuver requires range and closure-rate information. A combined analytical and preliminary simulation study was conducted to determine the ability of a human pilot to control the rendezvous by this method using visual sightings made during the initial collision-course control to obtain the range and closure rate. The analytical phase of the study reviewed the geometric relations between the vehicles and formed the basis for techniques to transform the angular sightings into range and closure rate. A preliminary simulation was then made to investigate the accuracy of these techniques. The simulation consisted of an analog computer, an oscilloscope to represent the view a pilot would have-with a stabilized sight, and a timer. Results indicate that pilots, using an optical sight and a timer, can successfully arrest the angular motion of the line of sight between two rendezvous vehicles and obtain relative range and closure rate with sufficient accuracy to perform the final braking maneuver successfully.

  6. The relationship between self-control, job satisfaction and life satisfaction in Chinese employees: A preliminary study.

    Science.gov (United States)

    Dou, Kai; Nie, Yan-Gang; Wang, Yu-Jie; Liu, Yao-Zhong

    2016-01-01

    Previous studies have demonstrated that self-control is positively related to life satisfaction, but this association in Chinese employees and its underlying mechanism are less commonly investigated. In this preliminary study the relationships between self-control and life satisfaction and the mediating effect of job satisfaction were tested. Participants were 482 full-time employees (188 male, 294 female) from different cities in China. They answered self-report questionnaires online that assessed self-control, job satisfaction, and life satisfaction. Path analyses were conducted and bootstrap technique was used to judge the significance of the mediation. Self-control was positively related to both job and life satisfaction. More importantly, job satisfaction significantly mediated the association between self-control and life satisfaction. Furthermore, there was no significant difference in the size of the mediating effect between intrinsic and extrinsic job satisfaction. Results of this preliminary study provide further evidence of the positive association between self-control and life satisfaction. Job satisfaction is found to mediate this relationship.

  7. Technological measures for controlling the use of copyrighted works of authorship in the information society

    Directory of Open Access Journals (Sweden)

    Spasić Vidoje

    2016-01-01

    Full Text Available Information technology has given rise to the problem of controlling the use of copyrighted works of authorship from their unauthorized use. In this context, one of the effective solutions is the application of technological protection measures, which are aimed at a more efficient application of the protection measures prescribed by the law. Technological protection measures imply the use of any technology, device or component which may be aimed at preventing or restricting an unauthorized use of a protected work of authorship, which has not been approved by the author or holder of some related right. Generally, all these measures may be classified into three basic groups: technological measures aimed at controlling access, technological measured aimed at controlling exploitation, and technological measures aimed at protecting the integrity of the work of authorship. Considering their technical characteristics and mode of application, they may be hardware-based measures, software-based measures, or a combination thereof. Modern technology has enabled the development of digital systems which entail a controlled use of copyrighted works and facilitate obtaining licences for their exploitation. They are commonly known as digital rights management (DRM. The DRM system should provide for a compromise between safeguarding the intellectual property rights of the copyright holder, the end user privacy, and system costs. The envisaged goals are achieved by employing various cryptographic measures. The process of developing technological protection measures is accompanied by concurrent attempts to circumvent the application of these measures. Thus, the effectiveness of these measures primarily depends on their legal protection, which has been recognized by a vast majority of legal systems, we now know the most modern legal system. However, the normative solutions are not uniform. The observed differences actually reflect problems in finding adequate forms

  8. The Foundation for Application of Multi-Agent Technology In a Holonic Shop Floor Control Architecture

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    control. The work is based on a theoretical study of new manufacturing systems theories, research of agent multi-agent technology, and two case studies. It is part of a larger research project which aims at developing a multi-cell control architecture based on the Holonic Manufacturing System theory.......The emerging theory regarding Holonic Manufacturing Systems (HMS) presents a advantageous theoretical foundation for the control system of the manufacturing system of the future. Previous research, at the Department, has demonstrated how company tailored shop floor control can be developed...... by applying simulation and cell control enabling technologies. In order to continue this research effort new concepts and theories for shop floor control are investigated. This article presents an overview of the multi-agent concept based on a literature study. This is followed by an investigation regarding...

  9. Controlled release/removal technology; Seigyo hoshutsu {center_dot} jokyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Tojo, K. [Kyushu Inst. of Tech., Fukuoka (Japan)

    2000-02-05

    The controlled release is to control optimally releasing velocity of active ingredient in medication or agricultural chemicals for therapy or vermin control. The novel transdermal therapeutic system can be developed considering diapause term of medication setting type or time pharmacology by storing information of time lag for medication permeability in medication keeping layer. Furthermore by resent iontophoresis technology using electric fields for controlling drug permeability through the skin, migration volume of active ingredient to blood can be controlled pulsed shape by On- Off of electric fields. In another hand, it comes to be clarified that drugs in the body can be extracted by contrarotating operation of electrodes. From now, effective removal system of barren materials from organism or time controlling therapeutic system with feed buck function can be realized by being optimal novel technology of medical engineering therapy. (NEDO)

  10. Preliminary investigation of the effect of air-pollution-control residue from waste incineration on the properties of cement paste and mortar

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Kjeldsen, Ane Mette; Galluci, Emmanuel

    2006-01-01

    For preliminary assessment of the engineering properties of concrete with air-pollution-control residue from waste incineration (APC) the possible reactivity of APC and the effect of APC on cement hydration were investigated by isothermal calorimetry, chemical shrinkage (pychnometry), thermal...... metals (approx. 3%) the preliminary studies were performed on untreated samples to evaluate the possible application of the least expensive materials and processes. Pastes and mortars of low alkali sulphate resistant Portland cement with 0%, 10%, and 20% APC substitution were prepared. Mixes with 10......% and 20% APC showed a major retarding effect of APC on the development of hydration. The APC was found to be pozzolanic. Chemical shrinkage measurements indicated early expansive reactions of pastes with the APC including evolution of air. Crack formation was observed in mortars with APC, and strength...

  11. Advantages of new micro-jet welding technology on weld microstructure control

    Directory of Open Access Journals (Sweden)

    Jan PIWNIK

    2013-01-01

    Full Text Available An innovative apparatus to welding process with micro-jet cooling of the weld made it possible to carry out technological tests, which have proved theoretical considerations about this problem. This project gives real opportunities for professional development in the field of welding with controlling the parameters of weld structure. These tests have proved that the new micro-jet technology has the potential for growth. It may be great achievement of welding technology in order to increase weld metal strength. The new technology with micro-jet cooling may have many practical applications in many fields, for example such as in the transport industry or to repair damaged metal elements. The advantages of the new device over the traditional system are the ability to control the structure of the weld, the weld mechanical performance increases and improve the quality of welded joints.

  12. Human factors design review guidelines for advanced nuclear control room technologies

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.; Brown, W. (Brookhaven National Lab., Upton, NY (United States)); Granda, T.; Baker, C. (Carlow Associates, Inc., Fairfax, VA (United States))

    1991-01-01

    Advanced control rooms (ACRs) for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering aspects of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. This paper describes the rationale, general approach, and initial development of an NRC Advanced Control Room Design Review Guideline. 20 refs., 1 fig.

  13. Slow Dynamics Model of Compressed Air Energy Storage and Battery Storage Technologies for Automatic Generation Control

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, Venkat; Das, Trishna

    2016-05-01

    Increasing variable generation penetration and the consequent increase in short-term variability makes energy storage technologies look attractive, especially in the ancillary market for providing frequency regulation services. This paper presents slow dynamics model for compressed air energy storage and battery storage technologies that can be used in automatic generation control studies to assess the system frequency response and quantify the benefits from storage technologies in providing regulation service. The paper also represents the slow dynamics model of the power system integrated with storage technologies in a complete state space form. The storage technologies have been integrated to the IEEE 24 bus system with single area, and a comparative study of various solution strategies including transmission enhancement and combustion turbine have been performed in terms of generation cycling and frequency response performance metrics.

  14. A Preliminary Randomized Controlled Trial of Multifaceted Educational Intervention for Mild Cognitive Impairment Among Elderly Malays in Kuala Lumpur

    Directory of Open Access Journals (Sweden)

    Sa’ida Munira Johari

    2014-06-01

    Conclusion: A 12-month educational intervention on nutritional, lifestyle, and cognitive exercise significantly improved nutritional status, knowledge, and attitude score. The study lacked power to demonstrate a statistically significant positive effect on cognitive functioning; thus, the preliminary findings should be confirmed in a larger trial.

  15. Commercialization of JPL Virtual Reality calibration and redundant manipulator control technologies

    Science.gov (United States)

    Kim, Won S.; Seraji, Homayoun; Fiorini, Paolo; Brown, Robert; Christensen, Brian; Beale, Chris; Karlen, James; Eismann, Paul

    1994-01-01

    Within NASA's recent thrust for industrial collaboration, JPL (Jet Propulsion Laboratory) has recently established two technology cooperation agreements in the robotics area: one on virtual reality (VR) calibration with Deneb Robotics, Inc., and the other on redundant manipulator control with Robotics Research Corporation (RRC). These technology transfer cooperation tasks will enable both Deneb and RRC to commercialize enhanced versions of their products that will greatly benefit both space and terrestrial telerobotic applications.

  16. Command and Control for Distributed Operations: An Analysis of Possible Technologies, Structure and Employment

    Science.gov (United States)

    2007-06-01

    Area of Operations AODV Add-hoc On-demand Distance Vector AP Access Point ARP Address Resolution Protocol C2CE Command and Control...could bridge existing technologies with emerging mesh routing protocols to greatly expand communications. This test demonstrated the successful...architecture using emerging Commercial off the Shelf (COTS) Radio Frequency to Internet- Protocol (RF to IP) technologies that would further advance the

  17. A wireless solution for greenhouse monitoring and control system based on ZigBee technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    With the rapid development of wireless technologies, it is possible for Chinese greenhouses to be equipped with wireless sensor networks due to their low-cost, simplicity and mobility. In the current study, we compared the advantages of ZigBee with other two similar wireless networking protocols, Wi-Fi and Bluetooth, and proposed a wireless solution for greenhouse monitoring and control system based on ZigBee technology. As an explorative application of ZigBee technology in Chinese greenhouse, it may promote Chinese protected agriculture.

  18. Test-bed Assessment of Communication Technologies for a Power-Balancing Controller

    DEFF Research Database (Denmark)

    Findrik, Mislav; Pedersen, Rasmus; Hasenleithner, Eduard

    2016-01-01

    Due to growing need for sustainable energy, increasing number of different renewable energy resources are being connected into distribution grids. In order to efficiently manage a decentralized power generation units, the smart grid will rely on communication networks for information exchange...... and control. In this paper, we present a Smart Grid test-bed that integrates various communication technologies and deploys a power balancing controller for LV grids. Control performance of the introduced power balancing controller is subsequently investigated and its robustness to communication network cross......-traffic is evaluated. Various scenarios are demonstrated, assessing impact of communication network performance on quality of control....

  19. Investigational report on the trend of control technology; Seigyo gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    For the purpose of corresponding to changes of the industrial structure and making full use of the control technology, the paper investigated the state of the application. High-grade automation in the manufacturing industry has reached the spread of use at big companies for these 10 years. The hierarchical structure of business/process/DCS has been completed, and the optimal control and the advanced control have been realized. The development and spread to the much wider field is anticipated. The soft structure system is needed for equipment improvement in view of the life cycle of equipment and toward the elimination of bottlenecking. For the design of the control system, commercial tools began to be much used, and it is expected in future to accumulate and recycle the knowledge/knowhow for effective design work. Further, strict simulation models based material balance and heat balance have also been on the rise, and the advance in technology is expected. Because of the total productivity of the production equipment, the control technology is anticipated not only for the pursuit of controllability but for the use as supporting technology in the operation/driving/failure diagnosis for working out, carrying out and evaluating the optimum operation plan. 18 refs., 99 figs., 100 tabs.

  20. [Nonpoint pollution control for rural areas of China with ecological engineering technologies].

    Science.gov (United States)

    Yin, Chengqing; Mao, Zhanpo

    2002-02-01

    Nonpoint pollution from rural areas is the results of the ecosystem degradation, and ecological engineering technologies are good ways for the restoration of watershed and enhancing material cycling. There are two types of treatment strategies: to control the polluted runoff and to reduce the pollutants from the sources. Six control technologies are introduced and they are multipond systems, grassed filter trips, wetland systems, eco-agriculture, slope ecological engineering, ecological treatment of wastewater and solid waste. These technologies need to be combined systematically in order to form a watershed ecological engineering. In the control program, it is important to use countermeasure suitable to the local conditions. In addition, the input of sufficient investment, management and education is necessary.

  1. Research on Remote Video Monitoring System Used for Numerical Control Machine Tools Based on Embedded Technology

    Institute of Scientific and Technical Information of China (English)

    LIU Quan; QU Xuehong; ZHOU Henglin; LONG Yihong

    2006-01-01

    This paper designed an embedded video monitoring system using DSP(Digital Signal Processing) and ARM(Advanced RISC Machine). This system is an important part of self-service operation of numerical control machine tools. At first the analog input signals from the CCD(Charge Coupled Device) camera are transformed into digital signals, and then output to the DSP system, where the video sequence is encoded according to the new generation image compressing standard called H.264. The code will be transmitted to the ARM system through xBus, and then be packed in the ARM system and transmitted to the client port through the gateway. Web technology, embedded technology and image compressing as well as coding technology are integrated in the system, which can be widely used in self-service operation of numerical control machine tools and intelligent robot control areas.

  2. SELF-CONTROL FORMATION TECHNOLOGY FOR PRIMARY SCHOOL CHILDREN WITH MILD MENTAL RETARDATION IN LEARNING PROCESS

    Directory of Open Access Journals (Sweden)

    Vera A. Galkina

    2015-01-01

    Full Text Available The purpose of the article is to present self-control development technology meeting up-to-date requirements in the special education for pupils with mild mental retardation; to reveal the self-control special features for children of the studied category found during the experiment; to show necessity of the task-oriented work. Methods. The methods involve theoretical analysis of relevant psychologicpedagogical and methodical literature; empiric methods (conversation, writing tasks, observation; pedagogic experiment; quantitative and qualitative analysis. Results. The article contains the data obtained during the experiment concerning study of the self-control special features for primary school children with mild mental retardation in learning process. The author describes and scientifically justifies the self-control development technology based on the step-bystep approach for children of the studied category. The revealed reasons of low self-control level for primary school children with intellectual disorder are proven by qualitative and quantitative analysis. The presented experimental results confirm the developed technology efficiency and can be applied while studying of all disciplines at primary school. Scientific novelty. For the first time the unified (may be used at all subjects and comprehensive (for all self-control components self-control development technology was developed and proven for primary school children with mild mental disorder in learning process; transient phase necessity is proved and justified for mastering all control kinds by primary school children with mild mental retardation. Practical significance. The developed technology allows qualitative enhancement of learning activities for primary school children with mild mental retardation. The research results may be used in both correctional and educational work at special (correctional schools (type VIII and at general-education schools. In addition the results

  3. Assessing planetary protection and contamination control technologies for planetary science missions

    Science.gov (United States)

    Beauchamp, Patricia; Belz, Andrea

    Planetary protection and organic contamination control, like many technologically rich areas, continually progress. As a result of the 2011 Planetary Science Decadal Survey Report, Vision and Voyages for Planetary Science in the Decade 2013-2022, the future focus is now on proposed Mars sample return missions. In addition to Mars exploration we now have the exciting possibility of a potential mission to the outer planets, most likely Europa. This paper reassesses planetary protection and organic contamination control technologies, which were evaluated in 2005, and provides updates based on new science results, technology development, and programmatic priorities. The study integrates information gathered from interviews of a number of National Aeronautics and Space Administration (NASA) and European Space Agency (ESA) scientists, systems engineers, planetary protection engineers, and consultants, as well as relevant documents, and focuses on the technologies and practices relevant to the current project mission set as presented in the 2011 Planetary Science Decadal Survey. This paper provides the status of planetary protection and contamination control technologies as they apply to potential future missions, and provides findings and recommendations to improve our capabilities as we further explore our solar system. It has become clear that linking planetary protection and contamination control requirements and processes together early in mission development and spacecraft design is key to keeping mission costs in check and returning high-quality samples that are free from biological and organic contaminants.

  4. Application of adaptive fuzzy control technology to pressure control of a pressurizer

    Institute of Scientific and Technical Information of China (English)

    YANG Ben-kun; BIAN Xin-qian; GUO Wei-lai

    2005-01-01

    A pressurizer is one of important equipment in a pressurized water reactor plant. It is used to maintain the pressure of primary coolant within allowed range because the sharp change of coolant pressure affects the security of reactor,therefor,the study of pressurizer's pressure control methods is very important. In this paper, an adaptive fuzzy controller is presented for pressure control of a pressurizer in a nuclear power plant. The controller can on-line tune fuzzy control rules and parameters by self-learning in the actual control process, which possesses the way of thinking like human to make a decision. The simulation results for a pressurized water reactor plant show that the adaptive fuzzy controller has optimum and intelligent characteristics, which prove the controller is effective.

  5. Sentinel Node Mapping Using Indocyanine Green and Near-infrared Fluorescence Imaging Technology for Uterine Malignancies: Preliminary Experience With the Da Vinci Xi System.

    Science.gov (United States)

    Siesto, Gabriele; Romano, Fabrizio; Fiamengo, Barbara; Vitobello, Domenico

    2016-01-01

    Sentinel lymph node (SLN) mapping has emerged as the new frontier for the surgical staging of apparently early-stage cervical and endometrial cancer. Different colorimetric and radioactive tracers, alone and in combination, have been proposed with encouraging results. Fluorometric mapping using indocyanine green (ICG) appears to be a suitable and attractive alternative to provide reliable staging [1-4]. In this video, we present the technique of SLN mapping in 2 cases (1 endometrial and 1 cervical cancer, respectively) using ICG and the near-infrared technology provided by the newest Da Vinci Xi robotic system (Intuitive Surgical Inc., Sunnyvale, CA). Together we report the results of our preliminary experience on the first 20 cases performed. The new robotic Da Vinci Xi system was available at our institution since May 2015. Upon institutional review board/ethical committee approval, all consecutive patients with early-stage endometrial and cervical cancer who were judged suitable for robotic surgery have been enrolled for SLN mapping with ICG. We adopted the Memorial Sloan Kettering Cancer Center SLN algorithm; the tracer was delivered into the cervix in all cases. Four milliliters (1.25 mg/mL) of ICG was injected divided into the 3- and 9-o'clock positions of the cervix alone, with 1 mL deep into the stroma and 1 mL submucosally at the skin incision. Sentinel lymph nodes were examined with a protocol including both ultrastaging with immunohistochemistry [3] and 1-step nucleic acid amplification assay [5,6] under a parallel protocol of study. During the study period, 20 cases were managed; 14 and 6 patients had endometrial and cervical cancer, respectively. SLN was detected in all cases (20/20, 100%). Bilateral SLNs were detected in 17 of 20 (85.0%) cases. Based on preoperative and intraoperative findings, 13 (65.0%) patients received systematic pelvic lymphadenectomy after SLN mapping. Three (15.0%) patients had microscopic nodal metastases on SLN. No

  6. DISTURBANCE ERROR INVARIANCE IN AUTOMATIC CONTROL SYSTEMS FOR TECHNOLOGICAL OBJECT TRAJECTORY MOVEMENT

    Directory of Open Access Journals (Sweden)

    A. V. Lekareva

    2016-09-01

    Full Text Available We consider combined control in automatic control systems for technological objects trajectory movements. We present research results of the system disturbance invariance ensuring on the example of the technological manipulator that implements hydrocutting of the oil pipelines. Control is based on the propositions of the fourth modified invariance form with the use of bootstrapping methods. The paper presents analysis of results obtained by two different correction methods. The essence of the first method lies in injection of additional component into the already established control signal and formation of the channel for that component. Control signal correction during the signal synthesis stage in the control device constitutes the basis for the second method. Research results have shown high efficiency of application for both correction methods. Both methods have roughly the same precision. We have shown that the correction in the control device is preferable because it has no influence on the inner contour of the system. We have shown the necessity of the block usage with the variable transmission coefficient, which value is determined by technological trajectory parameters. Research results can be applied in practice for improvement of the precision specifications of automatic control systems for trajectorial manipulators.

  7. The Network Policy Control Technology%网络策略控制技术

    Institute of Scientific and Technical Information of China (English)

    桂勇胜; 陶妍丹; 钟华

    2012-01-01

    With the the complexity of network system management and the conrtol technology, the network policy control technology causes the attention of people. Introduces the lastest research situation of network policy control technology of abroad, and describes it from the management based on policy and strategy oriented middleware. Introduces the research situation of domestic network policy control technology, and points out the deficiency of similar technology in our country. Points out that the digital policy description language based on the semantic, policy collision de- tection technology, examination and approval technology based on policy, and automatic deploy- ment and autonomous technology based on digital strategy, making them as the research direc- tion of this field.%随着网络系统管理和控制技术发展的复杂性,网络策略控制技术引起人们的关注。介绍国外网络策略控制技术的最新研究现状,从基于策略的管理、策略中间件两方面进行阐述。介绍国内网络策略控制技术的研究现状,并指出国内同类技术存在的不足之处:指出以基于语义的数字策略描述语言、策略冲突检测技术、基于策略审核批准技术、基于数字策略的自动部署和自治执行技术等四个方面作为该领域的研究方向。

  8. Enabling Spacecraft Formation Flying through Position Determination, Control and Enhanced Automation Technologies

    Science.gov (United States)

    Bristow, John; Bauer, Frank; Hartman, Kate; How, Jonathan

    2000-01-01

    Formation Flying is revolutionizing the way the space community conducts science missions around the Earth and in deep space. This technological revolution will provide new, innovative ways for the community to gather scientific information, share that information between space vehicles and the ground, and expedite the human exploration of space. Once fully matured, formation flying will result in numerous sciencecraft acting as virtual platforms and sensor webs, gathering significantly more and better science data than call be collected today. To achieve this goal, key technologies must be developed including those that address the following basic questions posed by the spacecraft: Where am I? Where is the rest of the fleet? Where do I need to be? What do I have to do (and what am I able to do) to get there? The answers to these questions and the means to implement those answers will depend oil the specific mission needs and formation configuration. However, certain critical technologies are common to most formations. These technologies include high-precision position and relative-position knowledge including Global Positioning System (GPS) mid celestial navigation; high degrees of spacecraft autonomy inter-spacecraft communication capabilities; targeting and control including distributed control algorithms, and high precision control thrusters and actuators. This paper provides an overview of a selection of the current activities NASA/DoD/Industry/Academia are working to develop Formation Flying technologies as quickly as possible, the hurdles that need to be overcome to achieve our formation flying vision, and the team's approach to transfer this technology to space. It will also describe several of the formation flying testbeds, such as Orion and University Nanosatellites, that are being developed to demonstrate and validate many of these innovative sensing and formation control technologies.

  9. Research on assembly reliability control technology for computer numerical control machine tools

    Directory of Open Access Journals (Sweden)

    Yan Ran

    2017-01-01

    Full Text Available Nowadays, although more and more companies focus on improving the quality of computer numerical control machine tools, its reliability control still remains as an unsolved problem. Since assembly reliability control is very important in product reliability assurance in China, a new key assembly processes extraction method based on the integration of quality function deployment; failure mode, effects, and criticality analysis; and fuzzy theory for computer numerical control machine tools is proposed. Firstly, assembly faults and assembly reliability control flow of computer numerical control machine tools are studied. Secondly, quality function deployment; failure mode, effects, and criticality analysis; and fuzzy theory are integrated to build a scientific extraction model, by which the key assembly processes meeting both customer functional demands and failure data distribution can be extracted, also an example is given to illustrate the correctness and effectiveness of the method. Finally, the assembly reliability monitoring system is established based on key assembly processes to realize and simplify this method.

  10. ARMS CONTROL: U.S. Efforts to Control the Transfer of Nuclear-Capable Missile Technology

    Science.gov (United States)

    2015-12-11

    risk of diversion is an important part of its analysis, Commerce focuses its reviews on certain countries that are developing nuclear-capable missiles...ogy to countries developing nuclear-capable missile systems. Our work was conducted in the United States at the Departments of State, Commerce , and...the MTCR in halting the transfer of MTCR-related systems and technology to countries developing nuclear-capable missile systems. The objectives, scope

  11. Optimal Control Policy for Environment withScience and Technology Stochastic Occur

    Institute of Scientific and Technical Information of China (English)

    MinggaoXue; ChulinLi; PuGong

    2004-01-01

    In this paper, the control policy for environment with two kinds of irreversibility, which work in opposite directions and uncertainty of cost is regarded as an investment decision. By using real-option theory, the paper presents the model of the optimal control policy for environment under the science and technology that can reduce environment pollution stochastic occur. The paper has discussed the effects of changes in the various parameters on the critical value at which the policy should be adopted. The results show thatthe optimal control policy is quite sensitive to the science and technology which can reduce environment pollution stochastic occur, pointing to the importance of carefully accounting for its impact in determining the control policy for environment.

  12. Energy-efficient air pollution controls for fossil-fueled plants: Technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sayer, J.H.

    1995-06-01

    The 1990 Clean Air Act Amendments require most fossil-fuel fired power plants to reduce sulfur dioxide, nitrogen oxides, and particulate emissions. While emission-control equipment is available to help most of New York State`s 91 utility units in 31 power plants comply with the new regulations, technologies currently available consume energy, increase carbon dioxide emissions, reduce operating efficiency, and may produce large amounts of solid and/or semisolid byproducts that use additional energy for processing and disposal. This report discribes several pollution-control technologies that are more energy efficient compared to traditional technologies for controlling sulfur dioxide, nitrogen oxide, and particulates, that may have application in New York State. These technologies are either in commercial use, under development, or in the demonstration phase; This report also presents operating characteristics for these technologies and discusses solutions to dispose of pollution-control system byproducts. Estimated energy consumption for emission-control systems relative to a plant`s gross generating capacity is 3 to 5 for reducing up to 90% sulfur dioxide emissions from coal-fired plants. 0.5 to 2.5% for reducing nitrogen oxide emissions by up to 80% from all fossil-fuel fired plants; and 0.5 to 1.5 % for controlling particulate emissions from oil- and coal-fired plants. While fuel switching and/or cofiring with natural gas are options to reduce emissions, these techniques are not considered in this report; the discussion is limited to fossil-fueled steam-generating plants.

  13. An Unconventional Inchworm Actuator Based on PZT/ERFs Control Technology

    OpenAIRE

    Guojun Liu; Yanyan Zhang; Jianfang Liu; Jianqiao Li; Chunxiu Tang; Tengfei Wang; Xuhao Yang

    2016-01-01

    An unconventional inchworm actuator for precision positioning based on piezoelectric (PZT) actuation and electrorheological fluids (ERFs) control technology is presented. The actuator consists of actuation unit (PZT stack pump), fluid control unit (ERFs valve), and execution unit (hydraulic actuator). In view of smaller deformation of PZT stack, a new structure is designed for actuation unit, which integrates the advantages of two modes (namely, diaphragm type and piston type) of the volume c...

  14. SELF-CONTROL FORMATION TECHNOLOGY FOR PRIMARY SCHOOL CHILDREN WITH MILD MENTAL RETARDATION IN LEARNING PROCESS

    OpenAIRE

    Vera A. Galkina

    2015-01-01

    The purpose of the article is to present self-control development technology meeting up-to-date requirements in the special education for pupils with mild mental retardation; to reveal the self-control special features for children of the studied category found during the experiment; to show necessity of the task-oriented work. Methods. The methods involve theoretical analysis of relevant psychologicpedagogical and methodical literature; empiric methods (conversation, writing tasks, observati...

  15. REMOTE SYNTHESIS AND CONTROL INFORMATION TECHNOLOGY OF SYSTEM-DYNAMIC MODELS

    Directory of Open Access Journals (Sweden)

    A. V. Masloboev

    2015-07-01

    Full Text Available The general line of research is concerned with development of information technologies and computer simulation tools for management information and analytical support of complex semistructured systems. Regional socio-economic systems are consideredas a representative of this system type. Investigation is carried out within the bounds of development strategy implementation of the Arctic zone of the Russian Federation and national safety until 2020 in the Murmansk region, specifically under engineering of high end information infrastructure for innovation and security control problem-solving of regional development. Research methodology consists of system dynamics modeling method, distributed information system engineering technologies, pattern-based modeling and design techniques. The work deals with development of toolkit for decision-making information support problem-solving in the field of innovation security management of regional economics. For that purpose a system-dynamic models suite of innovation process standard components and information technology for remote formation and control of innovation business simulation models under research have been developed. Designed toolkit provides innovation security index dynamics forecasting and innovation business effectiveness of regional economics. Information technology is implemented within the bounds of thin client architecture and is intended for simulation models design process automation of complex systems. Technology implementation software tools provide pattern-based system-dynamic models distributed formation and simulation control of innovation processes. The technology provides availability and reusability index enhancement of information support facilities in application to innovation process simulation at the expense of distributed access to innovation business simulation modeling tools and model synthesis by the reusable components, simulating standard elements of innovation

  16. Technology Reinvestment Program/Advanced ``Zero Emission'' Control Valve (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    J. Napoleon

    1998-12-01

    The objectives of this effort are to determine, develop and demonstrate the feasibility of significantly reducing the cost and expanding the applications for a family of Advanced Zero Emissions Control Valves that meets the fugitive emissions requirements of the 1990 Amendments to the Clean Air Act. This program is a direct technology spin-off from the valve technology that is critical to the US Navy's Nuclear Powered Fleet. These zero emissions valves will allow the Hydrocarbon and Chemical Processing Industries, etc., to maintain their competitiveness and still meet environmental and safety requirements. Phase 2 is directed at refining the basic technologies developed during Phase 1 so that they can be more readily selected and utilized by the target market. In addition to various necessary certifications, the project will develop a full featured digital controller with ``smart valve'' growth capability, expanding valve sizes/applications and identifying valve materials to permit applications in severe operational environments.

  17. Color deviation controlling of phosphor conformal coating by advanced spray painting technology for white LEDs.

    Science.gov (United States)

    Yang, Liang; Wang, Simin; Lv, Zhicheng; Liu, Sheng

    2013-04-01

    An advanced phosphor conformal coating technology is proposed, good correlated color temperature (CCT) and chromaticity uniformity samples are fabricated through phosphor spray painting technology. Spray painting technology is also suitable for phosphor conformal coating of whole LED wafers. The samples of different CCTs are obtained through controlling the phosphor film thickness in the range of 6-80 μm; CCT variation of samples can be controlled in the range of ±200 K. The experimental Δuv reveals that the spray painting method can obtain a much smaller CCT variation (Δuv of 1.36e(-3)) than the conventional dispensing method (Δuv of 11.86e(-3)) when the light is emitted at angles from -90° to +90°, and chromaticity area uniformity is also improved significantly.

  18. 78 FR 42430 - Revisions to the Export Administration Regulations Based on the 2012 Missile Technology Control...

    Science.gov (United States)

    2013-07-16

    ... (Definitions of Terms as Used in the Export Administration Regulations) by amending the definition of the term... Definitions of terms as used in the Export Administration Regulations (EAR). * * * * * Payload... Administration Regulations Based on the 2012 Missile Technology Control Regime Plenary Agreements AGENCY:...

  19. INFORMATION AND COMMUNICATION TECHNOLOGIES FOR PREVENTION AND CONTROL OF CERVICAL CANCER

    Directory of Open Access Journals (Sweden)

    Victor Chi

    2011-08-01

    Full Text Available This paper presents the development of a system to prevent and control Cervical Cancer. This systemruns on a handheld using infrared technology from a service point to make the current process moreefficient for the staff responsible for carrying out diagnostic tests, as well as for doctors from healthclinics in communities belonging to the city of Tizimín, Yucatan, Mexico.

  20. Technology development for metallic hot structures in aerodynamic control surfaces of reusable launchers

    NARCIS (Netherlands)

    Sudmeijer, K.J.; Wentzel, C.; Lefeber, B.M.; Kloosterman, A.

    2002-01-01

    In this paper a summary is presented of the technology development in the Netherlands focussed on the design and development of a metallic aerodynamic control surface for the future European reusable launcher. The applied materials are mainly Oxide Dispersion Strengthened (ODS) alloys produced by

  1. Technology and Jobs: Computer-Aided Design. Numerical-Control Machine-Tool Operators. Office Automation.

    Science.gov (United States)

    Stanton, Michael; And Others

    1985-01-01

    Three reports on the effects of high technology on the nature of work include (1) Stanton on applications and implications of computer-aided design for engineers, drafters, and architects; (2) Nardone on the outlook and training of numerical-control machine tool operators; and (3) Austin and Drake on the future of clerical occupations in automated…

  2. 75 FR 15655 - Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...

    Science.gov (United States)

    2010-03-30

    ... AGENCY 40 CFR Part 63 RIN 2060-AP91 Requirements for Control Technology Determinations for Major Sources... Division, Office of Air Quality Planning and Standards (D205- 02), Environmental Protection Agency... facilities. Brick and Structural Clay Products; Clay 327122 Ceramic wall and floor tile manufacturing...

  3. An Analysis of Air Pollution Control Technologies for Shipyard Emitted Volatile Organic Compounds (VOCS)

    Science.gov (United States)

    1993-03-01

    A typical absorption control unit consists of a raised column or tower that is packed with reticulated spheres or layered distribution trays. The...existing spray operations. The technology has been demonstrated using acrylics, polyesters, cellulosics , alkyds, and commercial paints and lacquers

  4. Command, Control, Communication, Computers and Information Technology (C4&IT). Strategic Plan, FY2008 - 2012

    Science.gov (United States)

    2008-01-01

    environment that includes migration of Microsite participants and documents 30 • External Web site via FatWire Content Management System (CMS) to...Integration CMS Content Management System CND Computer Network Defense COBIT Control Objectives for Information and related Technology

  5. Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

    1996-10-02

    This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies.

  6. Environmental control technology for mining and milling low-grade uranium resources

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, S.A.; Blahnik, D.E.; Long, L.W.; Bloomster, C.H.

    1981-04-01

    This study examined the type and level of wastes that would be generated in the mining and milling of U/sub 3/O/sub 8/ from four potential domestic sources of uranium. The estimated costs of the technology to control these wastes to different degrees of stringency are presented.

  7. Fuzzy controllers and fuzzy expert systems: industrial applications of fuzzy technology

    Science.gov (United States)

    Bonissone, Piero P.

    1995-06-01

    We will provide a brief description of the field of approximate reasoning systems, with a particular emphasis on the development of fuzzy logic control (FLC). FLC technology has drastically reduced the development time and deployment cost for the synthesis of nonlinear controllers for dynamic systems. As a result we have experienced an increased number of FLC applications. In a recently published paper we have illustrated some of our efforts in FLC technology transfer, covering projects in turboshaft aircraft engine control, stream turbine startup, steam turbine cycling optimization, resonant converter power supply control, and data-induced modeling of the nonlinear relationship between process variable in a rolling mill stand. These applications will be illustrated in the oral presentation. In this paper, we will compare these applications in a cost/complexity framework, and examine the driving factors that led to the use of FLCs in each application. We will emphasize the role of fuzzy logic in developing supervisory controllers and in maintaining explicit the tradeoff criteria used to manage multiple control strategies. Finally, we will describe some of our FLC technology research efforts in automatic rule base tuning and generation, leading to a suite of programs for reinforcement learning, supervised learning, genetic algorithms, steepest descent algorithms, and rule clustering.

  8. Preliminary study on field buses for the control system of the high voltage of the ATLAS hadronic calorimeter; Etude preliminaire d`un reseau de terrain pour le systeme de controle des hautes tensions du calorimetre hadronique d`Atlas

    Energy Technology Data Exchange (ETDEWEB)

    Drevet, F.; Chadelas, R.; Montarou, G.

    1996-12-31

    We present here after a preliminary study on field buses for the control system of the high voltage of the photomultipliers of the TILECAL calorimeter. After some generalities, different commercial buses are reviewed (CAN, ARCET, WorldFIP, Profibus and LonWorks). The Profibus and LonWorks solution are more extensively studies as a possible solution for the high voltage system of the TILE hadronic calorimeter. (authors).

  9. A new high-performance AC/DC power factor correction switching converter based on one-cycle control technology and active floating-charge technology

    Institute of Scientific and Technical Information of China (English)

    GAO Chao

    2008-01-01

    A new family of converters, high-performance AC/DC power factor correction (PFC) switching converters with one-cycle control technology and active floating-charge technology, was derived and experimentally verified. The topology of a single-phase CCM and DCM Boost-PFC switching converter was also analyzed. Its operating prniciples and control methods were expounded. Based on these, a new type of AC/DC switching converter circuits for PFC combined with one-cycle control technology was presented herein. The proposed AC/DC switching converter significantly helps improve the converter efficiency and its power factor value.

  10. Preliminary Discussion on the Science and Technology Website Information Construction%浅论科技网站信息建设

    Institute of Scientific and Technical Information of China (English)

    陈晓盼

    2001-01-01

    With an analysis of the characteristics of science and technology websites, the paper puts forward 4 principles for the science and technology website information construction. Ways of carrying out the science and technology website information construction are also discussed.

  11. Slow cortical potential Neurofeedback and self-management training in outpatient care for children with ADHD: study protocol and first preliminary results of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Hanna eChristiansen

    2014-11-01

    Full Text Available Background: Treatment for children with attention deficit/hyperactivity disorder (ADHD today is predominantly pharmacological. While it is the most common treatment, it might not always be the most appropriate one. Moreover, long term effects remain unclear. Behavior therapy and non-pharmacological treatments such as neurofeedback (NF are promising alternatives, though there are no routine outpatient care/effectiveness studies yet that have included children with medication or changes in medication.Methods/design: This paper presents the protocol of a randomized controlled trial to compare the effectiveness of a Slow Cortical Potential (SCP NF protocol with self-management (SM in a high frequent outpatient care setting. Both groups (NF/SM receive a total of 30 high frequent therapy sessions. Additionally, 6 sessions are reserved for comorbid problems. The primary outcome measure is the reduction of ADHD core symptoms according to parent and teacher ratings.Preliminary Results: Untill now 58 children were included in the study (48 males, with a mean age of 8.42 (1.34 years, and a mean IQ of 110 (13.37. Conners-3 parent and teacher ratings were used to estimate core symptom change. Since the study is still ongoing, and children are in different study stages, pre-post and follow-up results are not yet available for all children included. Preliminary results suggest overall good pre-post effects, though. For parent and teacher ratings an ANOVA with repeated measures yielded overall satisfying pre-post effects (η2 .175 to .513. Differences between groups (NF vs. SM could not yet be established (p = .81.Discussion: This is the first randomized controlled trial to test the effectiveness of a NF protocol in a high frequent outpatient care setting that does not exclude children on or with changes in medication. First preliminary results show positive effects. The rationale for the trial, the design, and the strengths and limitations of the study are

  12. Bridging the gap: adapting advanced display technologies for use in hybrid control rooms

    Energy Technology Data Exchange (ETDEWEB)

    Jokstad, Håkon [Inst. for Energy Technology, Halden (Norway); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-02-01

    The Institute for Energy Technology (IFE), runs the OECD Halden Reactor Project (HRP), featuring a state-of-the-art research simulator facility in Halden, Norway, called HAMMLAB. HAMMLAB serves two main purposes: the study of human behaviour in interaction with complex process systems; and the development, test and evaluation of prototype control centres and their individual systems. By studying operator performance in HAMMLAB and integrating the knowledge gained into new designs, the HRP contributes to improving operational safety, reliability, efficiency and productivity. The U.S. Department of Energy’s (DOE) Light Water Reactor Sustainability (LWRS) Program has contracted IFE to assist DOE national laboratory staff at Idaho National Laboratory (INL) in adapting HAMMLAB design concepts for the purpose of control room modernization at nuclear power plants in the U.S. In support of this effort, the DOE has built a simulator research facility at INL called the Human Systems Simulation Laboratory (HSSL). The HSSL is centered on control room modernization, in which industry provided plant instrumentation and controls are modified for upgrade opportunities. The HSSL houses the LWRS simulator, which is a reconfigurable full-scale and full-scope control room simulator. Consisting of 45 large touchscreens on 15 panels, the LWRS simulator is currently using this glass top technology to digitally represent and replicate the functionality of the analog I&C systems in existing control rooms. The LWRS simulator is reconfigurable in that different plant training simulator models obtained from the utilities can be run on the panels, and the panels can be physically moved and arranged to mimic the layout of those control rooms. The glass top technology and reconfigurability capabilities allow the LWRS simulator to be the research platform that is necessary to design, prototype, and validate human-system interface (HSI) technologies that can replace existing analog I&C. IFE has

  13. Conventional forces and arms control: Technology and strategy in a changing world

    Energy Technology Data Exchange (ETDEWEB)

    Pilat, J.F.; White, P.C.

    1990-06-01

    To address the implications of changes for future roles of conventional forces and to assess the technology implications of future strategies, force requirements, and conventional arms control agreements, the Center for National Security Studies in cooperation with the Defense Research and Applications Directorate of the Los Alamos National Laboratory held a conference on Conventional Forces and Arms Control: Technology and Strategy in a Changing World'' at Los Alamos from September 25--27, 1989. The distinguished participants from government, industry, and academia in the United States and Western Europe addressed such issues as: What are the implications of geopolitical and technological trends for international security and stability How will these global changes affect US and allied strategies and force structure, especially the requirements for conventional, nonnuclear forces What will be the role of and rationale for conventional forces in the context of current and prospective allied security requirements How can the West assure it will have the forces necessary for its security How will technological developments influence the structure of tomorrow's conventional forces What impacts will arms reductions have on future systems and force structures What are the prospects for the development and deployment in weapon systems of future conventional military technologies, in light of existing and potential political, economic, bureaucratic, and other impediments

  14. Ethylene Control Technologies in Extending Postharvest Shelf Life of Climacteric Fruit.

    Science.gov (United States)

    Zhang, Junhua; Cheng, Dong; Wang, Baobin; Khan, Iqbal; Ni, Yonghao

    2017-08-30

    Fresh fruit is important for a healthy diet. However, because of their seasonal production, regional specific cultivation, and perishable nature, it is essential to develop preservation technologies to extend the postharvest shelf life of fresh fruits. Climacteric fruit adopt spoilage because of ethylene, a key hormone associated with the ripening process. Therefore, controlling ethylene activity by following safe and effective approaches is a key to extend the postharvest shelf life of fruit. In this review, ethylene control technologies will be discussed aiming for the need of developing more innovative and effective approaches. The biosynthesis pathway will be given first. Then, the technologies determining the postharvest shelf life of climacteric fruit will be described with special attention to the latest and significant published works in this field. Special attention is given to 1-methylcyclopropene (1-MCP), which is effective in fruit preservation technologies. Finally, the encapsulation technology to improve the stability of 1-MCP will be proposed, using a potential encapsulation agent of 1-MCP, calixarene.

  15. Temperature modeling and control of Direct Methanol Fuel Cell based on adaptive neural fuzzy technology

    Institute of Scientific and Technical Information of China (English)

    Qi Zhidong; Zhu Xinjian; Cao Guangyi

    2006-01-01

    Aiming at on-line controlling of Direct Methanol Fuel Cell (DMFC) stack, an adaptive neural fuzzy inference technology is adopted in the modeling and control of DMFC temperature system. In the modeling process, an Adaptive Neural Fuzzy Inference System (ANFIS) identification model of DMFC stack temperature is developed based on the input-output sampled data, which can avoid the internal complexity of DMFC stack. In the controlling process, with the network model trained well as the reference model of the DMFC control system, a novel fuzzy genetic algorithm is used to regulate the parameters and fuzzy rules of a neural fuzzy controller. In the simulation, compared with the nonlinear Proportional Integral Derivative (PID) and traditional fuzzy algorithm, the improved neural fuzzy controller designed in this paper gets better performance, as demonstrated by the simulation results.

  16. Scripting, control, and privacy in domestic smart grid technologies: insights from a Danish pilot study

    DEFF Research Database (Denmark)

    Hansen, Meiken; Hauge, Bettina

    2017-01-01

    Smart grid research in Denmark has increasingly turned its focus on aggregator trading flexibility achieved by remotely controlling appliances, studying the technologies involved rather than the control. This paper investigates how different types of control were envisioned and designed for a two......-year smart grid trial in Denmark with 20 private households. Using the notion of script, processes of in- and de-scription were used to gain insights into perceived and enacted control. Based on empirical data from 26 interviews and three workshops, we show how the in-scription process of control can...... a reference for ‘passive consumers’ within a smart grid. This design prompts questions about how the users in smart grid development are envisioned and configured using different ideas about control. With current development and the need for additional energy reductions, consumers who invest in photovoltaic...

  17. Evaluation of information technology impact on effective internal control in the University system

    Energy Technology Data Exchange (ETDEWEB)

    Sanusi Fasilat, A., E-mail: Fasilat17@gmail.com; Hassan, Haslinda, E-mail: lynn@uum.edu.my [School of Accountancy, College of Business, Universiti Utara Malaysia, Sintok, Kedah (Malaysia)

    2015-12-11

    Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery.

  18. The Strategy and Technology Selection for Non-CO2 Greenhouse Gas Emission Control

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ya-Min; FENG Yong-Sheng

    2014-01-01

    The emission control of non-CO2 greenhouse gases is conducive to slowing down global warming. It is also helpful in controlling environmental pollution, and beneficial in improving the local health benefits. This paper aims at six kinds of non-CO2 greenhouse gases under United Nations Framework Convention on Climate Change, namely methane (CH4), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulfur hexafluoride (SF6), and nitrogen trifluoride (NF3). This paper analyzes the emission status and trend of China’s non-CO2 greenhouse gases, and provides some technology selections for non-CO2 emission reduction. Through strategic policy arrangements and appropriate technology choices, China can gain environmental protection and greenhouse gas control.

  19. Enhanced confinement regimes and control technology in the DIII-D tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Lohr, J.; Burrell, K.H. [General Atomics, San Diego, CA (United States); Coda, S. [Massachusetts Inst. of Tech., Cambridge, MA (United States)] [and others

    1993-07-01

    Advanced tokamak performance has been demonstrated in the DIII-D tokamak in a series of experiments which brought together developments in technology and improved understanding of the physical principles underlying tokamak operation. The achievement of greatly improved confinement coupled with development of new systems for real time plasma control have permitted investigation of the heretofore hidden or poorly controlled variables which together determine global confinement. These experiments, which included work in transport and control of the plasma boundary, point toward development of operationally and economically attractive reactors based on the tokamak. Some of these experiments are described.

  20. Optimization of technology and boiler control to improve economical and environmental parameters

    Energy Technology Data Exchange (ETDEWEB)

    Stosek, V.; Neuman, P.; Mechura, V.; Masek, Z. [EGU Prague (Czechoslovakia)

    1995-12-01

    For cutting emissions NO{sub x} and CO in the Czech Republic are mostly applied primary measurers. At the same time measuring and control systems are innovated. Analog control systems are replaced by digital and computer network is developed in the power energy generation. It enables application of sophisticated information and diagnostic systems. It is shown how the EGU designs modification of technology equipment, measurement and control systems to increase efficiency and cut NO{sub x} emission levels at 110 MWe units at Prunerov power station and 200 MWe units at Tusimice before and after reconstruction are presented.